Domain XML semantic integration based on extraction rules and ontology mapping

Directory of Open Access Journals (Sweden)

Huayu LI

2016-08-01

Full Text Available A plenty of XML documents exist in petroleum engineering field, but traditional XML integration solution can’t provide semantic query, which leads to low data use efficiency. In light of WeXML(oil&gas well XML data semantic integration and query requirement, this paper proposes a semantic integration method based on extraction rules and ontology mapping. The method firstly defines a series of extraction rules with which elements and properties of WeXML Schema are mapped to classes and properties in WeOWL ontology, respectively; secondly, an algorithm is used to transform WeXML documents into WeOWL instances. Because WeOWL provides limited semantics, ontology mappings between two ontologies are then built to explain class and property of global ontology with terms of WeOWL, and semantic query based on global domain concepts model is provided. By constructing a WeXML data semantic integration prototype system, the proposed transformational rule, the transfer algorithm and the mapping rule are tested.

Is There Any Evidence on the Existence of an Environmental Taxation Kuznets Curve? The Case of European Countries under Their Rule of Law Enforcement

Directory of Open Access Journals (Sweden)

Concetta Castiglione

2014-10-01

Full Text Available The paper gives new insights into the environmental taxation policy, demonstrating the existence of an inverse U-shaped relationship between environmental taxation and income in European countries. Our findings reveal this relationship to be influenced by enforcement of the rule of law, which contributes to shifting the turning point on the curve to lower income levels. We show that former transition economies have not reached the turning point due to weak institutions. To achieve the goal of sustainable development, the European Environment Agency’s Environmental Taxation Reform, proposing to shift taxation from “goods” to “bads”, should be accompanied by effective enforcement or the rule of law. The heterogeneity found between market-based and former transition European countries demonstrates the existence of problems at the EU-level in the coordination of environmental policies and enforcing the rule of law. In addition, the analysis of the determinants of environmental taxation points to the importance of factors related to consumption and production, governance, environmental quality, oil price shocks and the shift of environmental policy in European countries.

Final Rule for Control of Air Pollution From New Motor Vehicles and New Motor Vehicle Engines; Non-Conformance Penalties for 2004 and later Model Year Emission Standards for Heavy-Duty Diesel Engines and Heavy-Duty Diesel Vehicles

Science.gov (United States)

Final Rule for Control of Air Pollution From New Motor Vehicles and New Motor Vehicle Engines; Non-Conformance Penalties for 2004 and later Model Year Emission Standards for Heavy-Duty Diesel Engines and Heavy-Duty Diesel Vehicles

Reduction rules-based search algorithm for opportunistic replacement strategy of multiple life-limited parts

Directory of Open Access Journals (Sweden)

Xuyun FU

2018-01-01

Full Text Available The opportunistic replacement of multiple Life-Limited Parts (LLPs is a problem widely existing in industry. The replacement strategy of LLPs has a great impact on the total maintenance cost to a lot of equipment. This article focuses on finding a quick and effective algorithm for this problem. To improve the algorithm efficiency, six reduction rules are suggested from the perspectives of solution feasibility, determination of the replacement of LLPs, determination of the maintenance occasion and solution optimality. Based on these six reduction rules, a search algorithm is proposed. This search algorithm can identify one or several optimal solutions. A numerical experiment shows that these six reduction rules are effective, and the time consumed by the algorithm is less than 38 s if the total life of equipment is shorter than 55000 and the number of LLPs is less than 11. A specific case shows that the algorithm can obtain optimal solutions which are much better than the result of the traditional method in 10 s, and it can provide support for determining to-be-replaced LLPs when determining the maintenance workscope of an aircraft engine. Therefore, the algorithm is applicable to engineering applications concerning opportunistic replacement of multiple LLPs in aircraft engines.

Totally optimal decision rules

KAUST Repository

Amin, Talha

2017-11-22

Optimality of decision rules (patterns) can be measured in many ways. One of these is referred to as length. Length signifies the number of terms in a decision rule and is optimally minimized. Another, coverage represents the width of a rule’s applicability and generality. As such, it is desirable to maximize coverage. A totally optimal decision rule is a decision rule that has the minimum possible length and the maximum possible coverage. This paper presents a method for determining the presence of totally optimal decision rules for “complete” decision tables (representations of total functions in which different variables can have domains of differing values). Depending on the cardinalities of the domains, we can either guarantee for each tuple of values of the function that totally optimal rules exist for each row of the table (as in the case of total Boolean functions where the cardinalities are equal to 2) or, for each row, we can find a tuple of values of the function for which totally optimal rules do not exist for this row.

Totally optimal decision rules

KAUST Repository

Amin, Talha M.; Moshkov, Mikhail

2017-01-01

Optimality of decision rules (patterns) can be measured in many ways. One of these is referred to as length. Length signifies the number of terms in a decision rule and is optimally minimized. Another, coverage represents the width of a rule’s applicability and generality. As such, it is desirable to maximize coverage. A totally optimal decision rule is a decision rule that has the minimum possible length and the maximum possible coverage. This paper presents a method for determining the presence of totally optimal decision rules for “complete” decision tables (representations of total functions in which different variables can have domains of differing values). Depending on the cardinalities of the domains, we can either guarantee for each tuple of values of the function that totally optimal rules exist for each row of the table (as in the case of total Boolean functions where the cardinalities are equal to 2) or, for each row, we can find a tuple of values of the function for which totally optimal rules do not exist for this row.

Rules of thumb and simplified methods

International Nuclear Information System (INIS)

Lahti, G.P.

1985-01-01

The author points out the value of a thorough grounding in fundamental physics combined with experience of applied practice when using simplified methods and rules of thumb in shield engineering. Present-day quality assurance procedures and good engineering practices require careful documentation of all calculations. The aforementioned knowledge of rules of thumb and back-of-the-envelope calculations can assure both the preparer and the reviewer that the results in the quality assurance documentation are the physically correct ones

High Level Rule Modeling Language for Airline Crew Pairing

Science.gov (United States)

Mutlu, Erdal; Birbil, Ş. Ilker; Bülbül, Kerem; Yenigün, Hüsnü

2011-09-01

The crew pairing problem is an airline optimization problem where a set of least costly pairings (consecutive flights to be flown by a single crew) that covers every flight in a given flight network is sought. A pairing is defined by using a very complex set of feasibility rules imposed by international and national regulatory agencies, and also by the airline itself. The cost of a pairing is also defined by using complicated rules. When an optimization engine generates a sequence of flights from a given flight network, it has to check all these feasibility rules to ensure whether the sequence forms a valid pairing. Likewise, the engine needs to calculate the cost of the pairing by using certain rules. However, the rules used for checking the feasibility and calculating the costs are usually not static. Furthermore, the airline companies carry out what-if-type analyses through testing several alternate scenarios in each planning period. Therefore, embedding the implementation of feasibility checking and cost calculation rules into the source code of the optimization engine is not a practical approach. In this work, a high level language called ARUS is introduced for describing the feasibility and cost calculation rules. A compiler for ARUS is also implemented in this work to generate a dynamic link library to be used by crew pairing optimization engines.

Engineering judgement and bridging the fire safety gap in existing nuclear facilities

Energy Technology Data Exchange (ETDEWEB)

Qamheiah, G.; Wu, Y., E-mail: gqamheiah@plcfire.com, E-mail: dwu@plcfire.com [PLC Fire Safety Solutions, Mississauga, ON (Canada)

2014-07-01

Canadian nuclear power plants were constructed in the 1960's through the 1980's. Fire safety considerations were largely based on guidance from general building and fire codes in effect at the time. Since then, nuclear specific fire safety standards have been developed and adopted by the Regulator, increasing the expected level of fire safety in the process. Application of the standards to existing plants was largely limited to operational requirements viewed as retroactive. However, as existing facilities undergo modifications or refurbishment for the purpose of life extension, the expectation is that the design requirements of these fire safety standards also be satisfied. This creates considerable challenges for existing nuclear power plants as fire safety requirements such as those intended to assure means for safe egress, prevention of fire spread and protection of redundancy rely upon fire protection features that are inherent in the physical infrastructural design. This paper focuses on the methodology for conducting fire safety gap analyses on existing plants, and the integral role that engineering judgement plays in the development of viable and cost effective solutions to achieve the objectives of the current fire safety standards. (author)

The good engineer: giving virtue its due in engineering ethics.

Science.gov (United States)

Harris, Charles E

2008-06-01

During the past few decades, engineering ethics has been oriented towards protecting the public from professional misconduct by engineers and from the harmful effects of technology. This "preventive ethics" project has been accomplished primarily by means of the promulgation of negative rules. However, some aspects of engineering professionalism, such as (1) sensitivity to risk (2) awareness of the social context of technology, (3) respect for nature, and (4) commitment to the public good, cannot be adequately accounted for in terms of rules, certainly not negative rules. Virtue ethics is a more appropriate vehicle for expressing these aspects of engineering professionalism. Some of the unique features of virtue ethics are the greater place it gives for discretion and judgment and also for inner motivation and commitment. Four of the many professional virtues that are important for engineers correspond to the four aspects of engineering professionalism listed above. Finally, the importance of the humanities and social sciences in promoting these virtues suggests that these disciplines are crucial in the professional education of engineers.

Model-based Systems Engineering: Creation and Implementation of Model Validation Rules for MOS 2.0

Science.gov (United States)

Schmidt, Conrad K.

2013-01-01

Model-based Systems Engineering (MBSE) is an emerging modeling application that is used to enhance the system development process. MBSE allows for the centralization of project and system information that would otherwise be stored in extraneous locations, yielding better communication, expedited document generation and increased knowledge capture. Based on MBSE concepts and the employment of the Systems Modeling Language (SysML), extremely large and complex systems can be modeled from conceptual design through all system lifecycles. The Operations Revitalization Initiative (OpsRev) seeks to leverage MBSE to modernize the aging Advanced Multi-Mission Operations Systems (AMMOS) into the Mission Operations System 2.0 (MOS 2.0). The MOS 2.0 will be delivered in a series of conceptual and design models and documents built using the modeling tool MagicDraw. To ensure model completeness and cohesiveness, it is imperative that the MOS 2.0 models adhere to the specifications, patterns and profiles of the Mission Service Architecture Framework, thus leading to the use of validation rules. This paper outlines the process by which validation rules are identified, designed, implemented and tested. Ultimately, these rules provide the ability to maintain model correctness and synchronization in a simple, quick and effective manner, thus allowing the continuation of project and system progress.

77 FR 15250 - Value Engineering

Science.gov (United States)

2012-03-15

...-2011-0046] RIN 2125-AF40 Value Engineering AGENCY: Federal Highway Administration (FHWA), DOT. ACTION: Final rule. SUMMARY: This rule updates regulations to enhance the integration of value engineering (VE... Office of Management and Budget (OMB) Circular A-131 on Value Engineering. These revisions also will...

Does a Certain Rule Exist in the Long-Term Change of a City’s Livability? Evidence from New York, Tokyo, and Shanghai

Directory of Open Access Journals (Sweden)

Jiabin Liu

2017-09-01

Full Text Available Livability is the ultimate goal of city development. However, the question of whether the changing pattern of a city’s livability follows a certain rule or not has seldom been argued. To address the question, three cities, including New York, Tokyo, and Shanghai are selected for case studies. Based on a proposed assessment framework, the long-term trend and determinants of three cities’ livability are quantified and investigated. The results suggest that the livability of three cities demonstrates a similar changing pattern during the last decades, with the level going through a three-staged N-curve development, increasing at the beginning, then declining in the mid-term, and rebounding afterward. It implies that the staged development rule should be followed when constructing a livable city. Efforts should be targeted towards the most underlying aspects in different periods. The empirical analysis of the three cities ascertains the existence of a development rule regarding livability, and suggests many potential uses for decision-making support.

Idioms-based Business Rule Extraction

NARCIS (Netherlands)

R Smit (Rob)

2011-01-01

htmlabstractThis thesis studies the extraction of embedded business rules, using the idioms of the used framework to identify them. Embedded business rules exist as source code in the software system and knowledge about them may get lost. Extraction of those business rules could make them accessible

WellnessRules: A Web 3.0 Case Study in RuleML-Based Prolog-N3 Profile Interoperation

Science.gov (United States)

Boley, Harold; Osmun, Taylor Michael; Craig, Benjamin Larry

An interoperation study, WellnessRules, is described, where rules about wellness opportunities are created by participants in rule languages such as Prolog and N3, and translated within a wellness community using RuleML/XML. The wellness rules are centered around participants, as profiles, encoding knowledge about their activities conditional on the season, the time-of-day, the weather, etc. This distributed knowledge base extends FOAF profiles with a vocabulary and rules about wellness group networking. The communication between participants is organized through Rule Responder, permitting wellness-profile translation and distributed querying across engines. WellnessRules interoperates between rules and queries in the relational (Datalog) paradigm of the pure-Prolog subset of POSL and in the frame (F-logic) paradigm of N3. An evaluation of Rule Responder instantiated for WellnessRules revealed acceptable Web response times.

Decision mining revisited - Discovering overlapping rules

NARCIS (Netherlands)

Mannhardt, Felix; De Leoni, Massimiliano; Reijers, Hajo A.; Van Der Aalst, Wil M P

2016-01-01

Decision mining enriches process models with rules underlying decisions in processes using historical process execution data. Choices between multiple activities are specified through rules defined over process data. Existing decision mining methods focus on discovering mutually-exclusive rules,

Decision Mining Revisited - Discovering Overlapping Rules

NARCIS (Netherlands)

Mannhardt, F.; De Leoni, M.; Reijers, H.A.; van der Aalst, W.M.P.; Nurcan, S.; Soffer, P.; Bajec, M.; Eder, J.

2016-01-01

Decision mining enriches process models with rules underlying decisions in processes using historical process execution data. Choices between multiple activities are specified through rules defined over process data. Existing decision mining methods focus on discovering mutually-exclusive rules,

Geoethics: what can we learn from existing bio-, ecological, and engineering ethics codes?

Science.gov (United States)

Kieffer, Susan W.; Palka, John

2014-05-01

Many scientific disciplines are concerned about ethics, and codes of ethics for these professions exist, generally through the professional scientific societies such as the American Geophysical Union (AGU), American Geological Institute (AGI), American Association of Petroleum Engineers (AAPE), National Society of Professional Engineers (NSPE), Ecological Society of America (ESA), and many others worldwide. These vary considerably in depth and specificity. In this poster, we review existing codes with the goal of extracting fundamentals that should/can be broadly applied to all geo-disciplines. Most of these codes elucidate a set of principles that cover practical issues such as avoiding conflict of interest, avoiding plagiarism, not permitting illegitimate use of intellectual products, enhancing the prestige of the profession, acknowledging an obligation to perform services only in areas of competence, issuing public statements only in an objective manner, holding paramount the welfare of the public, and in general conducting oneself honorably, responsibly, and lawfully. It is striking that, given that the work of these societies and their members is relevant to the future of the earth, few discuss in any detail ethical obligations regarding our relation to the planet itself. The AGU code, for example, only states that "Members have an ethical obligation to weigh the societal benefits of their research against the costs and risks to human and animal welfare and impacts on the environment and society." The NSPE and AGI codes go somewhat further: "Engineers are encouraged to adhere to the principles of sustainable development in order to protect the environment for future generations," and "Geoscientists should strive to protect our natural environment. They should understand and anticipate the environmental consequences of their work and should disclose the consequences of recommended actions. They should acknowledge that resource extraction and use are necessary

Getting Objects Methods and Interactions by Extracting Business Rules from Legacy Systems

Directory of Open Access Journals (Sweden)

Omar El Beggar

2014-08-01

Full Text Available The maintenance of legacy systems becomes over the years extremely complex and highly expensive due to the incessant changes of company activities and policies. In this case, a new or an improved system must replace the previous one. However, replacing those systems completely from scratch is also very expensive and it represents a huge risk. The optimal scenario is evolving those systems by profiting from the valuable knowledge embedded in them. This paper aims to present an approach for knowledge acquisition from existing legacy systems by extracting business rules from source code. In fact, the business rules are extracted and assigned next to the domain entities in order to generate objects methods and interactions in an object-oriented platform. Furthermore, a rules translation in natural language is given. The aim is advancing a solution for re-engineering legacy systems, minimize the cost of their modernization and keep very small the gap between the company business and the renovated systems.

Metal/nonmetal diesel particulate matter rule

Energy Technology Data Exchange (ETDEWEB)

Tomko, D.M. [United States Dept. of Labor, Mine Safety and Health Administration, Pittsburgh, PA (United States). Safety and Health Technology Center; Stackpole, R.P. [United States Dept. of Labor, Mine Safety and Health Administration, Triadelphia, WV (United States). Approval and Certification Center; Findlay, C.D. [United States Dept. of Labor, Mine Safety and Health Administration, Arlington, VA (United States). Metal/Nonmetal Safety and Health; Pomroy, W.H. [United States Dept. of Labor, Mine Safety and Health Administration, Duluth, MN (United States). Metal/Nonmetal North Central District

2010-07-01

The American Mine Safety and Health Administration (MSHA) issued a health standard in January 2001 designed to reduce exposure to diesel particulate matter (DPM) in underground metal and nonmetal mines. The rule established an interim concentration limit for DPM of 400 {mu}g/m{sup 3} of total carbon, to be followed in 2004 by a final limit of 160 {mu}g/m{sup 3} of total carbon. The 2001 rule was challenged in federal court by various mining trade associations and mining companies. The rule was subsequently amended. This paper highlighted the major provisions of the 2006 final rule and summarized MSHAs current compliance sampling procedures. The concentration limit was changed to a permissible exposure limit and the sampling surrogate was changed from total carbon to elemental carbon. The MSHA published a new rule in 2006 which based the final limit on a miner's personal exposure rather than a concentration limit. The final limit was phased in using 3 steps over 2 years. This paper also discussed engineering controls and a recent MSHA report on organic carbon, elemental carbon and total carbon emissions from a diesel engine fueled with various blends of standard diesel and biodiesel. In May 2008, about two-thirds of all underground metal/nonmetal mines achieved and maintained compliance with the rule. 20 refs.

Welding engineering manual for constructing engineers. Pt. 2

International Nuclear Information System (INIS)

Neumann, A.

1986-01-01

The manual is a real treasure trove of knowledge and experience for the statics expert, the constructing engineer, and the welding engineer, who have to do with design and dimensioning of welding engineering work for steel structures, bridges, boilers, vessels, and pipes. Many practical examples are given together with numerous data that provide helpful information for the task of technical and economic design and dimensioning. Determination of efficient and appropriate cross-sectional dimensions and materials is the main goal of the manual. Structural steel engineering and installations subject to monitoring and inspection such as boilers, pipings, pressure vessels, and nuclear installations are the subject fields dealt with in separate chapters. The dimensioning rules presented are based on the regulations and technical codes valid in the GDR and the FRG. The catalogue of technical rules of the FRG concerning structural steel engineering and installations as above are given in supplementary chapters. (orig./HP) [de

Proposal to modify Rule 6, Rule 10a, and Rule 12c of the International Code of Nomenclature of Prokaryotes.

Science.gov (United States)

Oren, Aharon; Garrity, George M; Schink, Bernhard

2014-04-01

According to the current versions of Rule 10a and Rule 12c of the International Code of Nomenclature of Prokaryotes, names of a genus or subgenus and specific epithets may be taken from any source and may even be composed in an arbitrary manner. Based on these rules, names may be composed of any word or any combination of elements derived from any language with a Latin ending. We propose modifying these rules by adding the text, currently part of Recommendation 6, according to which words from languages other than Latin or Greek should be avoided as long as equivalents exist in Latin or Greek or can be constructed by combining word elements from these two languages. We also propose modification of Rule 6 by adopting some of the current paragraphs of Recommendation 6 to become part of the Rule.

The Rule-Assessment Approach and Education.

Science.gov (United States)

Siegler, Robert S.

1982-01-01

This paper describes the rule-assessment approach to cognitive development. The basic question that motivated the rule-assessment approach is how people's existing knowledge influences their ability to learn. Research using the rule-assessment approach is summarized in terms of eight conclusions, each illustrated with empirical examples.…

Decision Mining Revisited – Discovering Overlapping Rules

NARCIS (Netherlands)

Mannhardt, F.; de Leoni, M.; Reijers, H.A.; van der Aalst, W.M.P.

2016-01-01

Decision mining enriches process models with rules underlying decisions in processes using historical process execution data. Choices between multiple activities are specified through rules defined over process data. Existing decision mining methods focus on discovering mutually-exclusive rules,

Momentum sum rules for fragmentation functions

International Nuclear Information System (INIS)

Meissner, S.; Metz, A.; Pitonyak, D.

2010-01-01

Momentum sum rules for fragmentation functions are considered. In particular, we give a general proof of the Schaefer-Teryaev sum rule for the transverse momentum dependent Collins function. We also argue that corresponding sum rules for related fragmentation functions do not exist. Our model-independent analysis is supplemented by calculations in a simple field-theoretical model.

Thermodynamic Modeling of a Solid Oxide Fuel Cell to Couple with an Existing Gas Turbine Engine Model

Science.gov (United States)

Brinson, Thomas E.; Kopasakis, George

2004-01-01

The Controls and Dynamics Technology Branch at NASA Glenn Research Center are interested in combining a solid oxide fuel cell (SOFC) to operate in conjunction with a gas turbine engine. A detailed engine model currently exists in the Matlab/Simulink environment. The idea is to incorporate a SOFC model within the turbine engine simulation and observe the hybrid system's performance. The fuel cell will be heated to its appropriate operating condition by the engine s combustor. Once the fuel cell is operating at its steady-state temperature, the gas burner will back down slowly until the engine is fully operating on the hot gases exhausted from the SOFC. The SOFC code is based on a steady-state model developed by The U.S. Department of Energy (DOE). In its current form, the DOE SOFC model exists in Microsoft Excel and uses Visual Basics to create an I-V (current-voltage) profile. For the project's application, the main issue with this model is that the gas path flow and fuel flow temperatures are used as input parameters instead of outputs. The objective is to create a SOFC model based on the DOE model that inputs the fuel cells flow rates and outputs temperature of the flow streams; therefore, creating a temperature profile as a function of fuel flow rate. This will be done by applying the First Law of Thermodynamics for a flow system to the fuel cell. Validation of this model will be done in two procedures. First, for a given flow rate the exit stream temperature will be calculated and compared to DOE SOFC temperature as a point comparison. Next, an I-V curve and temperature curve will be generated where the I-V curve will be compared with the DOE SOFC I-V curve. Matching I-V curves will suggest validation of the temperature curve because voltage is a function of temperature. Once the temperature profile is created and validated, the model will then be placed into the turbine engine simulation for system analysis.

Life cycle assessment of engineered nanomaterials: state of the art and strategies to overcome existing gaps.

Science.gov (United States)

Hischier, Roland; Walser, Tobias

2012-05-15

The use of engineered nanomaterials offers advantages as well as disadvantages from a sustainability perspective. It is important to identify such points as early as possible in order to be able to build on existing strengths, while counteracting disadvantages. Life Cycle Assessment (LCA) is a suitable method to assess the environmental performance of a product or process. But so far studies applying LCA to the area of nanotechnology have been scarce. One reason might be that the LCA framework has a whole list of issues that need further precision in order to be applicable to nanotechnologies: system boundaries and a functional unit have to be chosen in a way that allows one to do a comparison of equal functionalities; adequate and comprehensive life cycle inventory data for engineered nanomaterials are the key on the level of inventory analysis; and the impact assessment step requires a clear definition of the degree of detail on the level of nanoparticle emissions. The LCA studies existing thus far in the area of nanotechnology have barely begun to cover all these aspects. Thus, in order to improve the current situation, the authors propose to go ahead in each of the LCA stages as far as scientific advances allow. For the inventory modelling this means e.g. that comprehensive, transparently documented and quality ensured data of the most important engineered nanomaterials should be collected and made available in a widely-accepted format. Concerning nanoparticle emissions, as many parameters as possible have to be collected pertaining to the production, use, and the disposal phase of these engineered nanomaterials. Furthermore, on the level of impact assessment, relevant physical characteristics have to be identified for a toxicity assessment of nanoparticles and a consensus has to be found for a limited but sufficient number of independent parameters influencing toxicity to be collected. Copyright © 2012 Elsevier B.V. All rights reserved.

Evolving temporal association rules with genetic algorithms

OpenAIRE

Matthews, Stephen G.; Gongora, Mario A.; Hopgood, Adrian A.

2010-01-01

A novel framework for mining temporal association rules by discovering itemsets with a genetic algorithm is introduced. Metaheuristics have been applied to association rule mining, we show the efficacy of extending this to another variant - temporal association rule mining. Our framework is an enhancement to existing temporal association rule mining methods as it employs a genetic algorithm to simultaneously search the rule space and temporal space. A methodology for validating the ability of...

A rule-based software test data generator

Science.gov (United States)

Deason, William H.; Brown, David B.; Chang, Kai-Hsiung; Cross, James H., II

1991-01-01

Rule-based software test data generation is proposed as an alternative to either path/predicate analysis or random data generation. A prototype rule-based test data generator for Ada programs is constructed and compared to a random test data generator. Four Ada procedures are used in the comparison. Approximately 2000 rule-based test cases and 100,000 randomly generated test cases are automatically generated and executed. The success of the two methods is compared using standard coverage metrics. Simple statistical tests showing that even the primitive rule-based test data generation prototype is significantly better than random data generation are performed. This result demonstrates that rule-based test data generation is feasible and shows great promise in assisting test engineers, especially when the rule base is developed further.

Radioisotope power system based on derivative of existing Stirling engine

International Nuclear Information System (INIS)

Schock, A.; Or, C.T.; Kumar, V.

1995-01-01

In a recent paper, the authors presented the results of a system design study of a 75-watt(c) RSG (Radioisotope Stirling Generator) for possible application to the Pluto Fast Flyby mission. That study was based on a Stirling engine design generated by MTI (Mechanical Technology, Inc.). The MTI design was a derivative of a much larger (13 kwe) engine that they had developed and tested for NASA's LERC. Clearly, such a derivative would be a major extrapolation (downsizing) from what has actually been built and tested. To avoid that, the present paper describes a design for a 75-watt RSG system based on derivatives of a small (11-watt) engine and linear alternator system that has been under development by STC (Stirling Technology Company) for over three years and that has operated successfully for over 15,000 hours as of March 1995. Thus, the STC engines would require much less extrapolation from proven designs. The design employs a heat source consisting of two standard General Purpose Heat Source (GPHS) modules, coupled to four Stirling engines with linear alternators, any three of which could deliver the desired 75-watt(e) output if the fourth should fail. The four engines are coupled to four common radiators with redundant heatpipes for rejecting the engines' waste heat to space. The above engine and radiator redundancies promote system reliability. The paper describes detailed analyses to determine the effect of radiator geometry on system mass and performance, before and after an engine or heatpipe failure

Final Rule for Control of Air Pollution from Aircraft and Aircraft Engines: Emission Standards and Test Procedures

Science.gov (United States)

EPA is amending the existing emission standards for oxides of nitrogen (NOx) for new commercial aircraft engines. These standards are equivalent to the NOx emission standards of the United Nations International Civil Aviation Organization (ICAO).

Design and Analysis of Decision Rules via Dynamic Programming

KAUST Repository

Amin, Talha M.

2017-01-01

Another area of advancement is the presentation of algorithms for constructing Pareto optimal points for rules and rule systems. This allows us to study the existence of “totally optimal” decision rules

Challenges for Rule Systems on the Web

Science.gov (United States)

Hu, Yuh-Jong; Yeh, Ching-Long; Laun, Wolfgang

The RuleML Challenge started in 2007 with the objective of inspiring the issues of implementation for management, integration, interoperation and interchange of rules in an open distributed environment, such as the Web. Rules are usually classified as three types: deductive rules, normative rules, and reactive rules. The reactive rules are further classified as ECA rules and production rules. The study of combination rule and ontology is traced back to an earlier active rule system for relational and object-oriented (OO) databases. Recently, this issue has become one of the most important research problems in the Semantic Web. Once we consider a computer executable policy as a declarative set of rules and ontologies that guides the behavior of entities within a system, we have a flexible way to implement real world policies without rewriting the computer code, as we did before. Fortunately, we have de facto rule markup languages, such as RuleML or RIF to achieve the portability and interchange of rules for different rule systems. Otherwise, executing real-life rule-based applications on the Web is almost impossible. Several commercial or open source rule engines are available for the rule-based applications. However, we still need a standard rule language and benchmark for not only to compare the rule systems but also to measure the progress in the field. Finally, a number of real-life rule-based use cases will be investigated to demonstrate the applicability of current rule systems on the Web.

Code of Ethics for Electrical Engineers

Science.gov (United States)

Matsuki, Junya

The Institute of Electrical Engineers of Japan (IEEJ) has established the rules of practice for its members recently, based on its code of ethics enacted in 1998. In this paper, first, the characteristics of the IEEJ 1998 ethical code are explained in detail compared to the other ethical codes for other fields of engineering. Secondly, the contents which shall be included in the modern code of ethics for electrical engineers are discussed. Thirdly, the newly-established rules of practice and the modified code of ethics are presented. Finally, results of questionnaires on the new ethical code and rules which were answered on May 23, 2007, by 51 electrical and electronic students of the University of Fukui are shown.

Does a Link Exist Between Examination Performance and Lecture Attendance for First Year Engineering Students ?

OpenAIRE

O'Dwyer, Aidan

2011-01-01

The objective of this study is to examine if a link exists between lecture attendance and examination performance of Level 7, Year 1, Electrical Engineering students at Dublin Institute of Technology in the Electrical Systems subject. Lecture attendance was monitored and analysed over four academic years (2007-8, 2008-9, 2009-10 and 2010-11). The average lecture attendance for students in the three academic years from 2007-10 was 55%, increasing noticeably in the 2009-10 academic year. A stat...

An Efficient Compiler for Weighted Rewrite Rules

OpenAIRE

Mohri, Mehryar; Sproat, Richard

1996-01-01

Context-dependent rewrite rules are used in many areas of natural language and speech processing. Work in computational phonology has demonstrated that, given certain conditions, such rewrite rules can be represented as finite-state transducers (FSTs). We describe a new algorithm for compiling rewrite rules into FSTs. We show the algorithm to be simpler and more efficient than existing algorithms. Further, many of our applications demand the ability to compile weighted rules into weighted FST...

Requirements for guidelines systems: implementation challenges and lessons from existing software-engineering efforts.

Science.gov (United States)

Shah, Hemant; Allard, Raymond D; Enberg, Robert; Krishnan, Ganesh; Williams, Patricia; Nadkarni, Prakash M

2012-03-09

A large body of work in the clinical guidelines field has identified requirements for guideline systems, but there are formidable challenges in translating such requirements into production-quality systems that can be used in routine patient care. Detailed analysis of requirements from an implementation perspective can be useful in helping define sub-requirements to the point where they are implementable. Further, additional requirements emerge as a result of such analysis. During such an analysis, study of examples of existing, software-engineering efforts in non-biomedical fields can provide useful signposts to the implementer of a clinical guideline system. In addition to requirements described by guideline-system authors, comparative reviews of such systems, and publications discussing information needs for guideline systems and clinical decision support systems in general, we have incorporated additional requirements related to production-system robustness and functionality from publications in the business workflow domain, in addition to drawing on our own experience in the development of the Proteus guideline system (http://proteme.org). The sub-requirements are discussed by conveniently grouping them into the categories used by the review of Isern and Moreno 2008. We cite previous work under each category and then provide sub-requirements under each category, and provide example of similar work in software-engineering efforts that have addressed a similar problem in a non-biomedical context. When analyzing requirements from the implementation viewpoint, knowledge of successes and failures in related software-engineering efforts can guide implementers in the choice of effective design and development strategies.

Potential Implications of Approaches to Climate Change on the Clean Water Rule Definition of "Waters of the United States".

Science.gov (United States)

Faust, Derek R; Moore, Matthew T; Emison, Gerald Andrews; Rush, Scott A

2016-05-01

The 1972 Clean Water Act was passed to protect chemical, physical, and biological integrity of United States' waters. The U.S. Environmental Protection Agency and U.S. Army Corps of Engineers codified a new "waters of the United States" rule on June 29, 2015, because several Supreme Court case decisions caused confusion with the existing rule. Climate change could affect this rule through connectivity between groundwater and surface waters; floodplain waters and the 100-year floodplain; changes in jurisdictional status; and sea level rise on coastal ecosystems. Four approaches are discussed for handling these implications: (1) "Wait and see"; (2) changes to the rule; (3) use guidance documents; (4) Congress statutorily defining "waters of the United States." The approach chosen should be legally defensible and achieved in a timely fashion to provide protection to "waters of the United States" in proactive consideration of scientifically documented effects of climate change on aquatic ecosystems.

Correcting groove error in gratings ruled on a 500-mm ruling engine using interferometric control.

Science.gov (United States)

Mi, Xiaotao; Yu, Haili; Yu, Hongzhu; Zhang, Shanwen; Li, Xiaotian; Yao, Xuefeng; Qi, Xiangdong; Bayinhedhig; Wan, Qiuhua

2017-07-20

Groove error is one of the most important factors affecting grating quality and spectral performance. To reduce groove error, we propose a new ruling-tool carriage system based on aerostatic guideways. We design a new blank carriage system with double piezoelectric actuators. We also propose a completely closed-loop servo-control system with a new optical measurement system that can control the position of the diamond relative to the blank. To evaluate our proposed methods, we produced several gratings, including an echelle grating with 79  grooves/mm, a grating with 768  grooves/mm, and a high-density grating with 6000  grooves/mm. The results show that our methods effectively reduce groove error in ruled gratings.

Developmental engineering: a new paradigm for the design and manufacturing of cell-based products. Part II: from genes to networks: tissue engineering from the viewpoint of systems biology and network science.

Science.gov (United States)

Lenas, Petros; Moos, Malcolm; Luyten, Frank P

2009-12-01

The field of tissue engineering is moving toward a new concept of "in vitro biomimetics of in vivo tissue development." In Part I of this series, we proposed a theoretical framework integrating the concepts of developmental biology with those of process design to provide the rules for the design of biomimetic processes. We named this methodology "developmental engineering" to emphasize that it is not the tissue but the process of in vitro tissue development that has to be engineered. To formulate the process design rules in a rigorous way that will allow a computational design, we should refer to mathematical methods to model the biological process taking place in vitro. Tissue functions cannot be attributed to individual molecules but rather to complex interactions between the numerous components of a cell and interactions between cells in a tissue that form a network. For tissue engineering to advance to the level of a technologically driven discipline amenable to well-established principles of process engineering, a scientifically rigorous formulation is needed of the general design rules so that the behavior of networks of genes, proteins, or cells that govern the unfolding of developmental processes could be related to the design parameters. Now that sufficient experimental data exist to construct plausible mathematical models of many biological control circuits, explicit hypotheses can be evaluated using computational approaches to facilitate process design. Recent progress in systems biology has shown that the empirical concepts of developmental biology that we used in Part I to extract the rules of biomimetic process design can be expressed in rigorous mathematical terms. This allows the accurate characterization of manufacturing processes in tissue engineering as well as the properties of the artificial tissues themselves. In addition, network science has recently shown that the behavior of biological networks strongly depends on their topology and has

Support-Less Association Rule Mining Using Tuple Count Cube

OpenAIRE

Qin Ding; William Perrizo

2007-01-01

Association rule mining is one of the important tasks in data mining and knowledge discovery (KDD). The traditional task of association rule mining is to find all the rules with high support and high confidence. In some applications, we are interested in finding high confidence rules even though the support may be low. This type of problem differs from the traditional association rule mining problem; hence, it is called support-less association rule mining. Existing algorithms for association...

Engineering Electromagnetics

International Nuclear Information System (INIS)

Kim, Se Yun

2009-01-01

This book deals with engineering electromagnetics. It contains seven chapters, which treats understanding of engineering electromagnetics such as magnet and electron spin, current and a magnetic field and an electromagnetic wave, Essential tool for engineering electromagnetics on rector and scalar, rectangular coordinate system and curl vector, electrostatic field with coulomb rule and method of electric images, Biot-Savart law, Ampere law and magnetic force, Maxwell equation and an electromagnetic wave and reflection and penetration of electromagnetic plane wave.

Loading Deformation Characteristic Simulation Study of Engineering Vehicle Refurbished Tire

Science.gov (United States)

Qiang, Wang; Xiaojie, Qi; Zhao, Yang; Yunlong, Wang; Guotian, Wang; Degang, Lv

2018-05-01

The paper constructed engineering vehicle refurbished tire computer geometry model, mechanics model, contact model, finite element analysis model, did simulation study on load-deformation property of engineering vehicle refurbished tire by comparing with that of the new and the same type tire, got load-deformation of engineering vehicle refurbished tire under the working condition of static state and ground contact. The analysis result shows that change rules of radial-direction deformation and side-direction deformation of engineering vehicle refurbished tire are close to that of the new tire, radial-direction and side-direction deformation value is a little less than that of the new tire. When air inflation pressure was certain, radial-direction deformation linear rule of engineer vehicle refurbished tire would increase with load adding, however, side-direction deformation showed linear change rule, when air inflation pressure was low; and it would show increase of non-linear change rule, when air inflation pressure was very high.

Implementation of partnership management model of SMK (Vocational High School) with existing industries in mechanical engineering expertise in Central Java

Science.gov (United States)

Sumbodo, Wirawan; Pardjono, Samsudi, Rahadjo, Winarno Dwi

2018-03-01

This study aims to determine the existing conditions of implementation of partnership management model of SMK with the industry on the mechanical engineering expertise in Central Java. The method used is descriptive analysis. The research result shows that the implementation of partnership management model of SMK based on new existing industry produces ready graduates of 62.5% which belongs to low category, although the partnership program of SMK with the industry is done well with the average score of 3.17. As many as 37.5% of SMK graduates of Mechanical Engineering Expertise Program choose to continue their studies or to be an entrepreneur. It is expected that the partnership model of SMK with the industry can be developed into a reference for government policy in developing SMK that is able to produce graduates who are ready to work according to the needs of partner industry.

Unified patterns to transform business rules into an event coordination mechanism

OpenAIRE

De Roover, Willem; Vanthienen, Jan

2011-01-01

Business rules define and constrain various aspects of the business, such as vocabulary, behavior and organizational issues. Enforcing the rules of the business in information systems is however not straightforward, because different mechanisms exist for the (semi-)automatic transformation of various business constraints and rules. In this paper, we examine if and how business rules, not only data rules, but also process rules, timing rules, authorization rules, etc., can be expressed i...

Electromagnetic compatibility design and cabling system rules

International Nuclear Information System (INIS)

Raimbourg, J.

2009-01-01

This report is devoted to establish EMC (Electromagnetic Compatibility) design and cabling system rules. It is intended for hardware designers in charge of designing electronic maps or integrating existing materials into a comprehensive system. It is a practical guide. The rules described in this document do not require enhanced knowledge of advanced mathematical or physical concepts. The key point is to understand phenomena with a pragmatic approach to highlight the design and protection rules. (author)

Seismic evaluation of existing nuclear power plants and other facilities V. 1. Proceedings of the technical committee meeting. Working material

International Nuclear Information System (INIS)

2002-01-01

The objectives of this Tcm are: to review the IAEA Safety Report on Seismic Evaluation of Existing Nuclear Power Plants in order to achieve a consensus among Member States on this matter and to discuss the outlines of an IAEA Co-ordinated Research Programme on specific topics related to this subject. Today the nuclear industry relies much more on existing facilities than on the design of new ones. Nevertheless it appears that safety evaluation against external hazards is not a decreasing activity. The reason being that maintaining an acceptable level of nuclear safety requires periodic re-assessments of facilities, either because of modifications of the environment due to human activity or because of new data or new approaches in the assessment of natural hazards. In this regard, seismic re-evaluation has increasingly become a key issue for several existing nuclear facilities, including not only nuclear power plants but also other plants of the fuel cycle, as well as research reactors or laboratories. The IAEA has already supported development of engineering practices in this field by managing a Co-ordinated Research Programme, launched in 1992, on a Benchmark Study for the seismic analysis and testing of WWER 1000 type NPPs. It is now proposed to investigate other aspects of this issue. Many of these facilities were built according to older standards which did not take into account seismic hazard. Consequently, the seismic re-evaluation of existing facilities is a real challenge for earthquake engineers. In most of the cases, it is impossible to re-evaluate according to the up to date standards because entering these standards implies that some design rules are met, what is generally not the case for older facilities. In the best cases some rules exist for non nuclear buildings. In order to achieve a consensus on this matter, the IAEA intends to edit a Safety Report on 'Seismic Evaluation of existing NPPs'. The TCM will offer the opportunity to review the draft of

A history of slide rules for blackbody radiation computations

Science.gov (United States)

Johnson, R. Barry; Stewart, Sean M.

2012-10-01

During the Second World War the importance of utilizing detection devices capable of operating in the infrared portion of the electromagnetic spectrum was firmly established. Up until that time, laboriously constructed tables for blackbody radiation needed to be used in calculations involving the amount of radiation radiated within a given spectral region or for other related radiometric quantities. To rapidly achieve reasonably accurate calculations of such radiometric quantities, a blackbody radiation calculator was devised in slide rule form first in Germany in 1944 and soon after in England and the United States. In the immediate decades after its introduction, the radiation slide rule was widely adopted and recognized as a useful and important tool for engineers and scientists working in the infrared field. It reached its pinnacle in the United States in 1970 in a rule introduced by Electro Optical Industries, Inc. With the onset in the latter half of the 1970s of affordable, hand-held electronic calculators, the impending demise of the radiation slide rule was evident. No longer the calculational device of choice, the radiation slide rule all but disappeared within a few short years. Although today blackbody radiation calculations can be readily accomplished using anything from a programmable pocket calculator upwards, with each device making use of a wide variety of numerical approximations to the integral of Planck's function, radiation slide rules were in the early decades of infrared technology the definitive "workhorse" for those involved in infrared systems design and engineering. This paper presents a historical development of radiation slide rules with many versions being discussed.

Large-scale double-patterning compliant layouts for DP engine and design rule development

Science.gov (United States)

Cork, Christopher; Lucas, Kevin; Hapli, John; Raffard, Herve; Barnes, Levi

2009-03-01

Double Patterning is seen as the prime technology to keep Moore's law on path while EUV technology is still maturing into production worthiness. As previously seen for alternating-Phase Shift Mask technology[1], layout compliance of double patterning is not trivial [2,3] and blind shrinks of anything but the most simplistic existing layouts, will not be directly suitable for double patterning. Evaluating a production worthy double patterning engine with highly non-compliant layouts would put unrealistic expectations on that engine and provide metrics with poor applicability for eventual large designs. The true production use-case would be for designs that have at least some significant double patterning compliance already enforced at the design stage. With this in mind a set of ASIC design blocks of different sizes and complexities were created that were double patterning compliant. To achieve this, a set of standard cells were generated, which individually and in isolation were double patterning compliant, for multiple layers simultaneously. This was done using the automated Standard Cell creation tool CadabraTM [4]. To create a full ASIC, however, additional constraints were added to make sure compliance would not be broken across the boundaries between standard cells when placed next to each other [5]. These standard cells were then used to create a variety of double patterning compliant ASICs using iCCompilerTM to place the cells correctly. Now with a compliant layout, checks were made to see if the constraints made at the micro level really do ensure a fully compliant layout on the whole chip and if the coloring engine could cope with such large datasets. A production worthy double patterning engine is ideally distributable over multiple processors [6,7] so that fast turn-around time can be achievable on even the largest designs. We demonstrate the degree of linearity of scaling achievable with our double patterning engine. These results can be understood

Solar potential in existing urban layouts—Critical overview of the existing building stock in Slovenian context

International Nuclear Information System (INIS)

Košir, Mitja; Capeluto, Isaac Guedi; Krainer, Aleš; Kristl, Živa

2014-01-01

In recent years implementation of sustainable building design in the EU has become one of the key issues in reducing energy dependence. In this context efficient use of solar potential incident on building envelope is essential. The goal of the study is to evaluate the influence of interventions required by the new Slovenian legislation and to propose general site planning guidelines. Special emphasis is devoted to the existing building stock, which is due for refurbishment. The study is carried out on the basis of seven typical urban layouts, which are assessed according to the shape of layout, density, building orientation and design. The calculations are carried out with the program SHADING. The study showed that the existing layouts are not as problematic as had been expected and that form and orientation of buildings present a major challenge. Nevertheless, the quality and the duration of insolation are highly dependent on the specifics of each case. The study showed that by respecting the basic rules of good practice in conjunction with the existing requirements no major changes in the existing design principles are needed. - Highlights: • New Slovenian legislation regarding minimum insolation of building envelope. • Seven typical urban layouts were analysed. • Requirements and rules of good practice result in adequate insolation. • Duration of insolation is highly dependent on the specifics of each case

Drivers of Changes in Product Development Rules

DEFF Research Database (Denmark)

Christiansen, John K.; Varnes, Claus J.

2015-01-01

regimes. However, the analysis here indicates that there are different drivers, both internal and external, that cause companies to adopt new rules or modify their existing ones, such as changes in organizational structures, organizational conflicts, and changes in ownership or strategy. In addition......Purpose: - The purpose of this research is to investigate the drivers that induce companies to change their rules for managing product development. Most companies use a form of rule-based management approach, but surprisingly little is known about what makes companies change these rules...... 10 years based on three rounds of interviews with 40 managers. Findings: - Previous research has assumed that the dynamics of product development rules are based on internal learning processes, and that increasingly competent management will stimulate the implementation of newer and more complex rule...

An approach for environmental risk assessment of engineered nanomaterials using Analytical Hierarchy Process (AHP) and fuzzy inference rules.

Science.gov (United States)

Topuz, Emel; van Gestel, Cornelis A M

2016-01-01

The usage of Engineered Nanoparticles (ENPs) in consumer products is relatively new and there is a need to conduct environmental risk assessment (ERA) to evaluate their impacts on the environment. However, alternative approaches are required for ERA of ENPs because of the huge gap in data and knowledge compared to conventional pollutants and their unique properties that make it difficult to apply existing approaches. This study aims to propose an ERA approach for ENPs by integrating Analytical Hierarchy Process (AHP) and fuzzy inference models which provide a systematic evaluation of risk factors and reducing uncertainty about the data and information, respectively. Risk is assumed to be the combination of occurrence likelihood, exposure potential and toxic effects in the environment. A hierarchy was established to evaluate the sub factors of these components. Evaluation was made with fuzzy numbers to reduce uncertainty and incorporate the expert judgements. Overall score of each component was combined with fuzzy inference rules by using expert judgements. Proposed approach reports the risk class and its membership degree such as Minor (0.7). Therefore, results are precise and helpful to determine the risk management strategies. Moreover, priority weights calculated by comparing the risk factors based on their importance for the risk enable users to understand which factor is effective on the risk. Proposed approach was applied for Ag (two nanoparticles with different coating) and TiO2 nanoparticles for different case studies. Results verified the proposed benefits of the approach. Copyright © 2016 Elsevier Ltd. All rights reserved.

Analysis, Simulation, and Verification of Knowledge-Based, Rule-Based, and Expert Systems

Science.gov (United States)

Hinchey, Mike; Rash, James; Erickson, John; Gracanin, Denis; Rouff, Chris

2010-01-01

Mathematically sound techniques are used to view a knowledge-based system (KBS) as a set of processes executing in parallel and being enabled in response to specific rules being fired. The set of processes can be manipulated, examined, analyzed, and used in a simulation. The tool that embodies this technology may warn developers of errors in their rules, but may also highlight rules (or sets of rules) in the system that are underspecified (or overspecified) and need to be corrected for the KBS to operate as intended. The rules embodied in a KBS specify the allowed situations, events, and/or results of the system they describe. In that sense, they provide a very abstract specification of a system. The system is implemented through the combination of the system specification together with an appropriate inference engine, independent of the algorithm used in that inference engine. Viewing the rule base as a major component of the specification, and choosing an appropriate specification notation to represent it, reveals how additional power can be derived from an approach to the knowledge-base system that involves analysis, simulation, and verification. This innovative approach requires no special knowledge of the rules, and allows a general approach where standardized analysis, verification, simulation, and model checking techniques can be applied to the KBS.

Choice Rules and Accumulator Networks

Science.gov (United States)

2015-01-01

This article presents a preference accumulation model that can be used to implement a number of different multi-attribute heuristic choice rules, including the lexicographic rule, the majority of confirming dimensions (tallying) rule and the equal weights rule. The proposed model differs from existing accumulators in terms of attribute representation: Leakage and competition, typically applied only to preference accumulation, are also assumed to be involved in processing attribute values. This allows the model to perform a range of sophisticated attribute-wise comparisons, including comparisons that compute relative rank. The ability of a preference accumulation model composed of leaky competitive networks to mimic symbolic models of heuristic choice suggests that these 2 approaches are not incompatible, and that a unitary cognitive model of preferential choice, based on insights from both these approaches, may be feasible. PMID:28670592

Inverse-moment chiral sum rules

International Nuclear Information System (INIS)

Golowich, E.; Kambor, J.

1996-01-01

A general class of inverse-moment sum rules was previously derived by the authors in a chiral perturbation theory (ChPT) study at two-loop order of the isospin and hypercharge vector-current propagators. Here, we address the evaluation of the inverse-moment sum rules in terms of existing data and theoretical constraints. Two kinds of sum rules are seen to occur: those which contain as-yet undetermined O(q 6 ) counterterms and those free of such quantities. We use the former to obtain phenomenological evaluations of two O(q 6 ) counterterms. Light is shed on the important but difficult issue regarding contributions of higher orders in the ChPT expansion. copyright 1996 The American Physical Society

RIGHTS, RULES, AND DEMOCRACY

Directory of Open Access Journals (Sweden)

Richard S. Kay, University of Connecticut-School of Law, Estados Unidos

2012-11-01

Full Text Available Abstract: Democracy require protection of certain fundamental rights, but can we expect courts to follow rules? There seems little escape from the proposition that substantive constitutional review by an unelected judiciary is a presumptive abridgement of democratic decision-making. Once we have accepted the proposition that there exist human rights that ought to be protected, this should hardly surprise us. No one thinks courts are perfect translators of the rules invoked before them on every occasion. But it is equally clear that rules sometimes do decide cases. In modern legal systems the relative roles of courts and legislators with respect to the rules of the system is a commonplace. Legislatures make rules. Courts apply them in particular disputes. When we are talking about human rights, however, that assumption must be clarified in at least one way. The defense of the practice of constitutional review in this article assumes courts can and do enforce rules. This article also makes clear what is the meaning of “following rules”. Preference for judicial over legislative interpretation of rights, therefore, seems to hang on the question of whether or not judges are capable of subordinating their own judgment to that incorporated in the rules by their makers. This article maintains that, in general, entrenched constitutional rules (and not just constitutional courts can and do constrain public conduct and protect human rights. The article concludes that the value judgments will depend on our estimate of the benefits we derive from the process of representative self-government. Against those benefits we will have to measure the importance we place on being able to live our lives with the security created by a regime of human rights protected by the rule of law. Keywords: Democracy. Human Rights. Rules. Judicial Review.

Symbolic simulation of engineering systems on a supercomputer

International Nuclear Information System (INIS)

Ragheb, M.; Gvillo, D.; Makowitz, H.

1986-01-01

Model-Based Production-Rule systems for analysis are developed for the symbolic simulation of Complex Engineering systems on a CRAY X-MP Supercomputer. The Fault-Tree and Event-Tree Analysis methodologies from Systems-Analysis are used for problem representation and are coupled to the Rule-Based System Paradigm from Knowledge Engineering to provide modelling of engineering devices. Modelling is based on knowledge of the structure and function of the device rather than on human expertise alone. To implement the methodology, we developed a production-Rule Analysis System that uses both backward-chaining and forward-chaining: HAL-1986. The inference engine uses an Induction-Deduction-Oriented antecedent-consequent logic and is programmed in Portable Standard Lisp (PSL). The inference engine is general and can accommodate general modifications and additions to the knowledge base. The methodologies used will be demonstrated using a model for the identification of faults, and subsequent recovery from abnormal situations in Nuclear Reactor Safety Analysis. The use of the exposed methodologies for the prognostication of future device responses under operational and accident conditions using coupled symbolic and procedural programming is discussed

Rule-based decision making model

International Nuclear Information System (INIS)

Sirola, Miki

1998-01-01

A rule-based decision making model is designed in G2 environment. A theoretical and methodological frame for the model is composed and motivated. The rule-based decision making model is based on object-oriented modelling, knowledge engineering and decision theory. The idea of safety objective tree is utilized. Advanced rule-based methodologies are applied. A general decision making model 'decision element' is constructed. The strategy planning of the decision element is based on e.g. value theory and utility theory. A hypothetical process model is built to give input data for the decision element. The basic principle of the object model in decision making is division in tasks. Probability models are used in characterizing component availabilities. Bayes' theorem is used to recalculate the probability figures when new information is got. The model includes simple learning features to save the solution path. A decision analytic interpretation is given to the decision making process. (author)

40 CFR 63.1422 - Compliance dates and relationship of this rule to existing applicable rules.

Science.gov (United States)

2010-07-01

... existing barrier fluid system. (iv) The compressor shall be modified to permit connecting the compressor to a closed vent system. (2) Compliance with the compressor provisions of § 63.164 shall occur no later... closed-vent system. (5) Compliance with the surge control vessel and bottoms receiver provisions of § 63...

Applicability of creep damage rules to a nickel-base heat-resistant alloy Hastelloy XR

International Nuclear Information System (INIS)

Tsuji, Hirokazu; Nakajima, Najime; Tanabe, Tatsuhiko; Nakasone, Yuji

1992-01-01

A series of constant load and temperature creep rupture tests and varying load and/or temperature creep rupture tests was carried out on a nickel-base heat-resistant alloy Hastelloy XR, which was developed for applications in the High-Temperature Engineering Test Reactor, at temperatures ranging from 850 to 1000deg C in order to examine the applicability of the conventional creep damage rules, i.e., the life fraction, the strain fraction and their mixed rules. The life fraction rule showed the best applicability of these three criteria. The good applicability of the rule was considered to result from the fact that the creep strength of Hastelloy XR was not strongly affected by the change of the chemical composition and/or the microstructure during exposure to the high-temperature simulated HTGR helium environment. In conclusion the life fraction rule is applicable in engineering design of high-temperature components made of Hastelloy XR. (orig.)

Diversity of Rule-based Approaches: Classic Systems and Recent Applications

Directory of Open Access Journals (Sweden)

Grzegorz J. Nalepa

2016-11-01

Full Text Available Rules are a common symbolic model of knowledge. Rule-based systems share roots in cognitive science and artificial intelligence. In the former, they are mostly used in cognitive architectures; in the latter, they are developed in several domains including knowledge engineering and machine learning. This paper aims to give an overview of these issues with the focus on the current research perspective of artificial intelligence. Moreover, in this setting we discuss our results in the design of rule-based systems and their applications in context-aware and business intelligence systems.

A RuleML Study on Integrating Geographical and Health Information

DEFF Research Database (Denmark)

Gao, Sheng; Mioc, Darka; Boley, Harold

2008-01-01

To facilitate health surveillance, flexible ways to represent, integrate, and deduce health information become increasingly important. In this paper, an ontology is used to support the semantic definition of spatial, temporal and thematic factors of health information. The ontology is realized...... as an interchangeable RuleML knowledge base, consisting of facts and rules. Rules are also used for integrating geographical and health information. The implemented eHealthGeo system uses the OO jDREW reasoning engine to deduce implicit information such as spatial relationships. The system combines this with spatial...

Environmental engineering of navigation infrastructure: a survey of existing practices, challenges, and potential opportunities.

Science.gov (United States)

Fredette, Thomas J; Foran, Christy M; Brasfield, Sandra M; Suedel, Burton C

2012-01-01

Navigation infrastructure such as channels, jetties, river training structures, and lock-and-dam facilities are primary components of a safe and efficient water transportation system. Planning for such infrastructure has until recently involved efforts to minimize impacts on the environment through a standardized environmental assessment process. More recently, consistent with environmental sustainability concepts, planners have begun to consider how such projects can also be constructed with environmental enhancements. This study examined the existing institutional conditions within the US Army Corps of Engineers and cooperating federal agencies relative to incorporating environmental enhancements into navigation infrastructure projects. The study sought to (1) investigate institutional attitudes towards the environmental enhancement of navigation infrastructure (EENI) concept, (2) identify potential impediments to implementation and solutions to such impediments, (3) identify existing navigation projects designed with the express intent of enhancing environmental benefit in addition to the primary project purpose, (4) identify innovative ideas for increasing environmental benefits for navigation projects, (5) identify needs for additional technical information or research, and (6) identify laws, regulations, and policies that both support and hinder such design features. The principal investigation tool was an Internet-based survey with 53 questions. The survey captured a wide range of perspectives on the EENI concept including ideas, concerns, research needs, and relevant laws and policies. Study recommendations included further promotion of the concept of EENI to planners and designers, documentation of existing projects, initiation of pilot studies on some of the innovative ideas provided through the survey, and development of national goals and interagency agreements to facilitate implementation. Copyright © 2011 SETAC.

Rules-of-trade for international nuclear commerce

International Nuclear Information System (INIS)

Harris, W.R.

1978-07-01

The rules-of-trade are those treaties, laws, executive agreements, and implementing regulations that apply to international transfers of nuclear materials, equipment, technology, or skilled personnel. The rules-of-trade are a key element in assuring the international commerce that facilitates deployment of nuclear energy will not also facilitate the manufacture of nuclear explosive devices. But the rules must be pertinent, enforceable, and understandable. The two principal problems of current rules-of-trade concern their enforceability and their flexibility; these are discussed at some length. The following additional concerns are described briefly: fast breeder reactors, spent fuel management, nonconforming parties, eligibility for international financing, fair competition and equity, and pre-existing facilities

TECHNOLOGIES TO ENHANCE THE OPERATION OF EXISTING NATURAL GAS COMPRESSION INFRASTRUCTURE - MANIFOLD DESIGN FOR CONTROLLING ENGINE AIR BALANCE

Energy Technology Data Exchange (ETDEWEB)

Gary D. Bourn; Ford A. Phillips; Ralph E. Harris

2005-12-01

This document provides results and conclusions for Task 15.0--Detailed Analysis of Air Balance & Conceptual Design of Improved Air Manifolds in the ''Technologies to Enhance the Operation of Existing Natural Gas Compression Infrastructure'' project. SwRI{reg_sign} is conducting this project for DOE in conjunction with Pipeline Research Council International, Gas Machinery Research Council, El Paso Pipeline, Cooper Compression, and Southern Star, under DOE contract number DE-FC26-02NT41646. The objective of Task 15.0 was to investigate the perceived imbalance in airflow between power cylinders in two-stroke integral compressor engines and develop solutions via manifold redesign. The overall project objective is to develop and substantiate methods for operating integral engine/compressors in gas pipeline service, which reduce fuel consumption, increase capacity, and enhance mechanical integrity.

Transformation of Arden Syntax's medical logic modules into ArdenML for a business rules management system.

Science.gov (United States)

Jung, Chai Young; Choi, Jong-Ye; Jeong, Seong Jik; Cho, Kyunghee; Koo, Yong Duk; Bae, Jin Hee; Kim, Sukil

2016-05-16

Arden Syntax is a Health Level Seven International (HL7) standard language that is used for representing medical knowledge as logic statements. Arden Syntax Markup Language (ArdenML) is a new representation of Arden Syntax based on XML. Compilers are required to execute medical logic modules (MLMs) in the hospital environment. However, ArdenML may also replace the compiler. The purpose of this study is to demonstrate that MLMs, encoded in ArdenML, can be transformed into a commercial rule engine format through an XSLT stylesheet and made executable in a target system. The target rule engine selected was Blaze Advisor. We developed an XSLT stylesheet to transform MLMs in ArdenML into Structured Rules Language (SRL) in Blaze Advisor, through a comparison of syntax between the two languages. The stylesheet was then refined recursively, by building and applying rules collected from the billing and coding guidelines of the Korean health insurance service. Two nurse coders collected and verified the rules and two information technology (IT) specialists encoded the MLMs and built the XSLT stylesheet. Finally, the stylesheet was validated by importing the MLMs into Blaze Advisor and applying them to claims data. The language comparison revealed that Blaze Advisor requires the declaration of variables with explicit types. We used both integer and real numbers for numeric types in ArdenML. "IF∼THEN" statements and assignment statements in ArdenML become rules in Blaze Advisor. We designed an XSLT stylesheet to solve this issue. In addition, we maintained the order of rule execution in the transformed rules, and added two small programs to support variable declarations and action statements. A total of 1489 rules were reviewed during this study, of which 324 rules were collected. We removed duplicate rules and encoded 241 unique MLMs in ArdenML, which were successfully transformed into SRL and imported to Blaze Advisor via the XSLT stylesheet. When applied to 73

Efficient Encoding of Inflection Rules in NLP Systems

Directory of Open Access Journals (Sweden)

Péter BARABÁSS

2012-12-01

Full Text Available The grammatical parsing unit is a core module in natural language processing engines. This unit determines the grammatical roles of the incoming words and it converts the sentences into semantic models. A special grammar rule in agglutinative languages is the inflection rule. The traditional, automata-based parsers are usually not very effective in the parsing of inflection transformations. The paper presents implementation alternatives and compares them from the viewpoint of time efficiency and accuracy. The prototype system was tested with examples from Hungarian.

A Bayesian Scoring Technique for Mining Predictive and Non-Spurious Rules.

Science.gov (United States)

Batal, Iyad; Cooper, Gregory; Hauskrecht, Milos

Rule mining is an important class of data mining methods for discovering interesting patterns in data. The success of a rule mining method heavily depends on the evaluation function that is used to assess the quality of the rules. In this work, we propose a new rule evaluation score - the Predictive and Non-Spurious Rules (PNSR) score. This score relies on Bayesian inference to evaluate the quality of the rules and considers the structure of the rules to filter out spurious rules. We present an efficient algorithm for finding rules with high PNSR scores. The experiments demonstrate that our method is able to cover and explain the data with a much smaller rule set than existing methods.

Optical Generation of Fuzzy-Based Rules

Science.gov (United States)

Gur, Eran; Mendlovic, David; Zalevsky, Zeev

2002-08-01

In the last third of the 20th century, fuzzy logic has risen from a mathematical concept to an applicable approach in soft computing. Today, fuzzy logic is used in control systems for various applications, such as washing machines, train-brake systems, automobile automatic gear, and so forth. The approach of optical implementation of fuzzy inferencing was given by the authors in previous papers, giving an extra emphasis to applications with two dominant inputs. In this paper the authors introduce a real-time optical rule generator for the dual-input fuzzy-inference engine. The paper briefly goes over the dual-input optical implementation of fuzzy-logic inferencing. Then, the concept of constructing a set of rules from given data is discussed. Next, the authors show ways to implement this procedure optically. The discussion is accompanied by an example that illustrates the transformation from raw data into fuzzy set rules.

KEBERADAAN KONSEP RULE BY LAW (NEGARA BERDASARKAN HUKUM DIDALAM TEORI NEGARA HUKUM THE RULE OF LAW

Directory of Open Access Journals (Sweden)

Made Hendra Wijaya

2013-11-01

Full Text Available This research titled, the existence of the concept of rule by law (state law within thestate theories of law the rule of law, which is where the first problem: How can theadvantages of Rule by Law in the theory of law Rule of Law?, How is the dis advantages of aconcept of Rule by law in the theory of law Rule of Law.This research method using the method of normative, legal research that examines thewritten laws of the various aspects, ie aspects of the theory, history, philosophy, comparative,structure and composition, scope, and content, consistent, overview, and chapter by chapter,formality, and the binding force of a law, and the legal language used, but did not examine orimlementasi applied aspects. By using this approach of Historical analysis and approach oflegal conceptual analysis.In this research have found that the advantages of the concept of Rule by Law lies in theproviding of certainty, can also be social control for the community, thus ensuring all citizensin good order at all reciprocal relationships within the community. And Disadvantages of theconcept of Rule by Law if the Law which legalized state action is not supported by democracyand human rights, and the principles of justice, there will be a denial of human rights,widespread poverty, and racial segregation, and if the law is only utilized out by theauthorities as a means to legalize all forms of actions that violate human can inflicttotalitarian nature of the ruling

Testing Decision Rules for Multiattribute Decision Making

NARCIS (Netherlands)

Seidl, C.; Traub, S.

1996-01-01

This paper investigates the existence of an editing phase and studies the com- pliance of subjects' behaviour with the most popular multiattribute decision rules. We observed that our data comply well with the existence of an editing phase, at least if we allow for a natural error rate of some 25%.

Family Violence Prevention and Services Programs. Final rule.

Science.gov (United States)

2016-11-02

This rule will better prevent and protect survivors of family violence, domestic violence, and dating violence, by clarifying that all survivors must have access to services and programs funded under the Family Violence Prevention and Services Act. More specifically, the rule enhances accessibility and non-discrimination provisions, clarifies confidentiality rules, promotes coordination among community-based organizations, State Domestic Violence Coalitions, States, and Tribes, as well as incorporates new discretionary grant programs. Furthermore, the rule updates existing regulations to reflect statutory changes made to the Family Violence Prevention and Services Act, and updates procedures for soliciting and awarding grants. The rule also increases clarity and reduces potential confusion over statutory and regulatory standards. The rule codifies standards already used by the program in the Funding Opportunity Announcements and awards, in technical assistance, in reporting requirements, and in sub-regulatory guidance.

Formal and Computational Properties of the Confidence Boost of Association Rules

OpenAIRE

Balcázar, José L.

2011-01-01

Some existing notions of redundancy among association rules allow for a logical-style characterization and lead to irredundant bases of absolutely minimum size. One can push the intuition of redundancy further and find an intuitive notion of interest of an association rule, in terms of its "novelty" with respect to other rules. Namely: an irredundant rule is so because its confidence is higher than what the rest of the rules would suggest; then, one can ask: how much higher? We propose to mea...

A scientific approach to writing for engineers and scientists

CERN Document Server

Berger, Robert E

2014-01-01

This book is a guide to technical writing, presented in a systematic framework that mirrors the logic associated with the scientific process itself. Other English books merely define concepts and provide rules; this one explains the reasoning behind the rules. Other writing books for scientists and engineers focus primarily on how to gather and organize materials; this one focuses primarily on how to compose a readable sentence. The approach should be satisfying not only to scientists and engineers, but also to anyone that once took a grammar course but can't remember the rules - because there was no exposure to underlying principles.

An optimized outlier detection algorithm for jury-based grading of engineering design projects

DEFF Research Database (Denmark)

Thompson, Mary Kathryn; Espensen, Christina; Clemmensen, Line Katrine Harder

2016-01-01

This work characterizes and optimizes an outlier detection algorithm to identify potentially invalid scores produced by jury members while grading engineering design projects. The paper describes the original algorithm and the associated adjudication process in detail. The impact of the various...... (the base rule and the three additional conditions) play a role in the algorithm's performance and should be included in the algorithm. Because there is significant interaction between the base rule and the additional conditions, many acceptable combinations that balance the FPR and FNR can be found......, but no true optimum seems to exist. The performance of the best optimizations and the original algorithm are similar. Therefore, it should be possible to choose new coefficient values for jury populations in other cultures and contexts logically and empirically without a full optimization as long...

Security Research on Engineering Database System

Institute of Scientific and Technical Information of China (English)

无

2002-01-01

Engine engineering database system is an oriented C AD applied database management system that has the capability managing distributed data. The paper discusses the security issue of the engine engineering database management system (EDBMS). Through studying and analyzing the database security, to draw a series of securi ty rules, which reach B1, level security standard. Which includes discretionary access control (DAC), mandatory access control (MAC) and audit. The EDBMS implem ents functions of DAC, ...

Design rules for dynamic organization design

DEFF Research Database (Denmark)

Burton, Richard; Obel, Børge

2013-01-01

Organizational design rules are contingent if-then statements about what a good design should be for a given situation. Today’s challenge is to look forward to devise organization design rules for a different future with greater uncertainty and greater interdependency – all with dynamic performance...... demands. These new demands call for new design rules for coordination, incentives and leadership, among others. Our existing rules are mostly based upon past experience and empirical studies of what is. What might be – going beyond what we have observed and explained of yesterday and today to help design...... for a future new situation – is a disciplined response to examine the new contingencies of organizational design and their design consequences. Computational laboratories permit us to go beyond what is to develop and examine new design possibilities and boundaries to explore a future world of what might be. We...

Exploiting Semantic Web Technologies to Develop OWL-Based Clinical Practice Guideline Execution Engines.

Science.gov (United States)

Jafarpour, Borna; Abidi, Samina Raza; Abidi, Syed Sibte Raza

2016-01-01

Computerizing paper-based CPG and then executing them can provide evidence-informed decision support to physicians at the point of care. Semantic web technologies especially web ontology language (OWL) ontologies have been profusely used to represent computerized CPG. Using semantic web reasoning capabilities to execute OWL-based computerized CPG unties them from a specific custom-built CPG execution engine and increases their shareability as any OWL reasoner and triple store can be utilized for CPG execution. However, existing semantic web reasoning-based CPG execution engines suffer from lack of ability to execute CPG with high levels of expressivity, high cognitive load of computerization of paper-based CPG and updating their computerized versions. In order to address these limitations, we have developed three CPG execution engines based on OWL 1 DL, OWL 2 DL and OWL 2 DL + semantic web rule language (SWRL). OWL 1 DL serves as the base execution engine capable of executing a wide range of CPG constructs, however for executing highly complex CPG the OWL 2 DL and OWL 2 DL + SWRL offer additional executional capabilities. We evaluated the technical performance and medical correctness of our execution engines using a range of CPG. Technical evaluations show the efficiency of our CPG execution engines in terms of CPU time and validity of the generated recommendation in comparison to existing CPG execution engines. Medical evaluations by domain experts show the validity of the CPG-mediated therapy plans in terms of relevance, safety, and ordering for a wide range of patient scenarios.

Free Energy and Internal Combustion Engine Cycles

OpenAIRE

Harris, William D.

2012-01-01

The performance of one type (Carnot) of Internal Combustion Engine (ICE) cycle is analyzed within the framework of thermodynamic free energies. ICE performance is different from that of an External Combustion Engine (ECE) which is dictated by Carnot's rule.

A programmable rules engine to provide clinical decision support using HTML forms.

Science.gov (United States)

Heusinkveld, J; Geissbuhler, A; Sheshelidze, D; Miller, R

1999-01-01

The authors have developed a simple method for specifying rules to be applied to information on HTML forms. This approach allows clinical experts, who lack the programming expertise needed to write CGI scripts, to construct and maintain domain-specific knowledge and ordering capabilities within WizOrder, the order-entry and decision support system used at Vanderbilt Hospital. The clinical knowledge base maintainers use HTML editors to create forms and spreadsheet programs for rule entry. A test environment has been developed which uses Netscape to display forms; the production environment displays forms using an embedded browser.

Design Rules for Life Support Systems

Science.gov (United States)

Jones, Harry

2002-01-01

This paper considers some of the common assumptions and engineering rules of thumb used in life support system design. One general design rule is that the longer the mission, the more the life support system should use recycling and regenerable technologies. A more specific rule is that, if the system grows more than half the food, the food plants will supply all the oxygen needed for the crew life support. There are many such design rules that help in planning the analysis of life support systems and in checking results. These rules are typically if-then statements describing the results of steady-state, "back of the envelope," mass flow calculations. They are useful in identifying plausible candidate life support system designs and in rough allocations between resupply and resource recovery. Life support system designers should always review the design rules and make quick steady state calculations before doing detailed design and dynamic simulation. This paper develops the basis for the different assumptions and design rules and discusses how they should be used. We start top-down, with the highest level requirement to sustain human beings in a closed environment off Earth. We consider the crew needs for air, water, and food. We then discuss atmosphere leakage and recycling losses. The needs to support the crew and to make up losses define the fundamental life support system requirements. We consider the trade-offs between resupplying and recycling oxygen, water, and food. The specific choices between resupply and recycling are determined by mission duration, presence of in-situ resources, etc., and are defining parameters of life support system design.

Software engineering

CERN Document Server

Thorin, Marc

1985-01-01

Software Engineering describes the conceptual bases as well as the main methods and rules on computer programming. This book presents software engineering as a coherent and logically built synthesis and makes it possible to properly carry out an application of small or medium difficulty that can later be developed and adapted to more complex cases. This text is comprised of six chapters and begins by introducing the reader to the fundamental notions of entities, actions, and programming. The next two chapters elaborate on the concepts of information and consistency domains and show that a proc

Strategies for adding adaptive learning mechanisms to rule-based diagnostic expert systems

Science.gov (United States)

Stclair, D. C.; Sabharwal, C. L.; Bond, W. E.; Hacke, Keith

1988-01-01

Rule-based diagnostic expert systems can be used to perform many of the diagnostic chores necessary in today's complex space systems. These expert systems typically take a set of symptoms as input and produce diagnostic advice as output. The primary objective of such expert systems is to provide accurate and comprehensive advice which can be used to help return the space system in question to nominal operation. The development and maintenance of diagnostic expert systems is time and labor intensive since the services of both knowledge engineer(s) and domain expert(s) are required. The use of adaptive learning mechanisms to increment evaluate and refine rules promises to reduce both time and labor costs associated with such systems. This paper describes the basic adaptive learning mechanisms of strengthening, weakening, generalization, discrimination, and discovery. Next basic strategies are discussed for adding these learning mechanisms to rule-based diagnostic expert systems. These strategies support the incremental evaluation and refinement of rules in the knowledge base by comparing the set of advice given by the expert system (A) with the correct diagnosis (C). Techniques are described for selecting those rules in the in the knowledge base which should participate in adaptive learning. The strategies presented may be used with a wide variety of learning algorithms. Further, these strategies are applicable to a large number of rule-based diagnostic expert systems. They may be used to provide either immediate or deferred updating of the knowledge base.

Rule Systems for Runtime Verification: A Short Tutorial

Science.gov (United States)

Barringer, Howard; Havelund, Klaus; Rydeheard, David; Groce, Alex

In this tutorial, we introduce two rule-based systems for on and off-line trace analysis, RuleR and LogScope. RuleR is a conditional rule-based system, which has a simple and easily implemented algorithm for effective runtime verification, and into which one can compile a wide range of temporal logics and other specification formalisms used for runtime verification. Specifications can be parameterized with data, or even with specifications, allowing for temporal logic combinators to be defined. We outline a number of simple syntactic extensions of core RuleR that can lead to further conciseness of specification but still enabling easy and efficient implementation. RuleR is implemented in Java and we will demonstrate its ease of use in monitoring Java programs. LogScope is a derivation of RuleR adding a simple very user-friendly temporal logic. It was developed in Python, specifically for supporting testing of spacecraft flight software for NASA’s next 2011 Mars mission MSL (Mars Science Laboratory). The system has been applied by test engineers to analysis of log files generated by running the flight software. Detailed logging is already part of the system design approach, and hence there is no added instrumentation overhead caused by this approach. While post-mortem log analysis prevents the autonomous reaction to problems possible with traditional runtime verification, it provides a powerful tool for test automation. A new system is being developed that integrates features from both RuleR and LogScope.

Integrated Case Based and Rule Based Reasoning for Decision Support

OpenAIRE

Eshete, Azeb Bekele

2009-01-01

This project is a continuation of my specialization project which was focused on studying theoretical concepts related to case based reasoning method, rule based reasoning method and integration of them. The integration of rule-based and case-based reasoning methods has shown a substantial improvement with regards to performance over the individual methods. Verdande Technology As wants to try integrating the rule based reasoning method with an existing case based system. This project focu...

Adler-Weisberger sum rule for WLWL→WLWL scattering

International Nuclear Information System (INIS)

Pham, T.N.

1991-01-01

We analyse the Adler-Weisberger sum rule for W L W L →W L W L scattering. We find that at some energy, the W L W L total cross section must be large to saturate the sum rule. Measurements at future colliders would be needed to check the sum rule and to obtain the decay rates Γ(H→W L W L , Z L Z L ) which would be modified by the existence of a P-wave vector meson resonance in the standard model with strongly interacting Higgs sector or in technicolour models. (orig.)

Modeling and fuzzy control of the engine coolant conditioning system in an IC engine test bed

International Nuclear Information System (INIS)

Mohtasebi, Seyed Saeid; Shirazi, Farzad A.; Javaheri, Ahmad; Nava, Ghodrat Hamze

2010-01-01

Mechanical and thermodynamical performance of internal combustion engines is significantly affected by the engine working temperature. In an engine test bed, the internal combustion engines are tested in different operating conditions using a dynamometer. It is required that the engine temperature be controlled precisely, particularly in transient states. This precise control can be achieved by an engine coolant conditioning system mainly consisting of a heat exchanger, a control valve, and a controller. In this study, constitutive equations of the system are derived first. These differential equations show the second- order nonlinear time-varying dynamics of the system. The model is validated with the experimental data providing satisfactory results. After presenting the dynamic equations of the system, a fuzzy controller is designed based on our prior knowledge of the system. The fuzzy rules and the membership functions are derived by a trial and error and heuristic method. Because of the nonlinear nature of the system the fuzzy rules are set to satisfy the requirements of the temperature control for different operating conditions of the engine. The performance of the fuzzy controller is compared with a PI one for different transient conditions. The results of the simulation show the better performance of the fuzzy controller. The main advantages of the fuzzy controller are the shorter settling time, smaller overshoot, and improved performance especially in the transient states of the system

Exhibit celebrates five decades of women in engineering

OpenAIRE

Gilbert, Karen

2007-01-01

"Petticoats and Slide Rules," a historical exhibit on women in engineering from the Society of Women Engineers (SWE), is currently on display in the lobby of Hancock 100 and will remain at Virginia Tech through March of 2007.

Professional ethics in biomedical engineering practice and research.

Science.gov (United States)

Monzon, Jorge E; Monzon-Wyngaard, Alvaro

2008-01-01

This paper discusses some guidelines for use with the accepted fundamental canons of ethics for engineers. We present some rules of practice and professional obligations emerging from these canons. Basic recommendations for engineers dissenting on ethical grounds are also presented. Ethical issues relating to Biomedical Engineering research are illustrated. We mention some cases that could be used to further understanding the ethical implications of biomedical engineering practice.

Tender rules and trust influence on cooperation in the building industry

DEFF Research Database (Denmark)

Ussing, Lene Faber; Wandahl, Søren

2012-01-01

The building industry has for many years been criticized for not having as efficient and effective co-operation as other industries. Some parties in the building sector try to use a new form of collaboration as i.a. partnering. In a big part of those partnering projects a good working relationship...... exists, the building owner is satisfied, the involved companies earn money and the project finish in time. A lot of projects do not use partnering or other new forms of collaboration. In these projects the general impression is that the parties in the building sector are fighting instead of co......-operating. A questionnaire survey including building owners, contractors, suppliers, architects, engineers and client design advisor has been accomplished. The survey shows that the problem with co-operation among others is the way the tendering rules normally are used, where the normal assignment criterion is the lowest...

Reliable and adequateengineering surveys for construction: the rule of two D

Directory of Open Access Journals (Sweden)

Rakitina Natal'ya Nikolaevna

2014-01-01

Full Text Available In the article the current state of quality supply of engineering surveys for construction is discussed. The main criteria for improving the design quality of buildings and structures for industrial, civil and other purposes is the reliability and adequacy of the results of engineering-geological surveys. The authors show the examples of inadequate study of engineering-geological conditions in the design of structures that led to emergency situations. Consideration of the reasons of accidents in structures showed that they are caused by lack of research conducted, the underestimation of the complexity of geological conditions. In the process of conducting geotechnical investigations the works were focused directly in the enclosure of a designed building, and the features of geological and hydrogeological conditions of the off-site were much more complex. In the process of construction during the sinking of the pit activation suffusion processes occurred, which led to an accident. Underestimation of the use of these geological funds in this example shows that even in the presence of fund materials, which are currently almost not increased, errors may occur due to the notorious savings for research. The requirements to ensuring the reliability and adequacy of engineering-geological surveys, which the authors call "The Rule of two D" (in Russian — Reliability and Adequacy, lie in the existing legal acts. The practice of fulfilling requirements to a large extend shows that the desire to save money at the stage of design and exploration works results in additional costs for additional design, recovery from accidents and works on a new project. The authors critically evaluated the development of engineering and geotechnical engineering instead of geological survey, which is not methodologically and theoretically substantiated and leads to the excluding from engineering surveys the consideration of the off-site geotechnical conditions directly below

Design Transformations for Rule-based Procedural Modeling

KAUST Repository

Lienhard, Stefan; Lau, Cheryl; Mü ller, Pascal; Wonka, Peter; Pauly, Mark

2017-01-01

We introduce design transformations for rule-based procedural models, e.g., for buildings and plants. Given two or more procedural designs, each specified by a grammar, a design transformation combines elements of the existing designs to generate new designs. We introduce two technical components to enable design transformations. First, we extend the concept of discrete rule switching to rule merging, leading to a very large shape space for combining procedural models. Second, we propose an algorithm to jointly derive two or more grammars, called grammar co-derivation. We demonstrate two applications of our work: we show that our framework leads to a larger variety of models than previous work, and we show fine-grained transformation sequences between two procedural models.

Design Transformations for Rule-based Procedural Modeling

KAUST Repository

Lienhard, Stefan

2017-05-24

We introduce design transformations for rule-based procedural models, e.g., for buildings and plants. Given two or more procedural designs, each specified by a grammar, a design transformation combines elements of the existing designs to generate new designs. We introduce two technical components to enable design transformations. First, we extend the concept of discrete rule switching to rule merging, leading to a very large shape space for combining procedural models. Second, we propose an algorithm to jointly derive two or more grammars, called grammar co-derivation. We demonstrate two applications of our work: we show that our framework leads to a larger variety of models than previous work, and we show fine-grained transformation sequences between two procedural models.

The optimum decision rules for the oddity task.

Science.gov (United States)

Versfeld, N J; Dai, H; Green, D M

1996-01-01

This paper presents the optimum decision rule for an m-interval oddity task in which m-1 intervals contain the same signal and one is different or odd. The optimum decision rule depends on the degree of correlation among observations. The present approach unifies the different strategies that occur with "roved" or "fixed" experiments (Macmillan & Creelman, 1991, p. 147). It is shown that the commonly used decision rule for an m-interval oddity task corresponds to the special case of highly correlated observations. However, as is also true for the same-different paradigm, there exists a different optimum decision rule when the observations are independent. The relation between the probability of a correct response and d' is derived for the three-interval oddity task. Tables are presented of this relation for the three-, four-, and five-interval oddity task. Finally, an experimental method is proposed that allows one to determine the decision rule used by the observer in an oddity experiment.

Interest Rate Rules, Exchange Market Pressure, and Successful Exchange Rate Management

NARCIS (Netherlands)

Klaassen, F.; Mavromatis, K.

2016-01-01

Central banks with an exchange rate objective set the interest rate in response to what they call ''pressure.'' Instead, existing interest rate rules rely on the exchange rate minus its target. To stay closer to actual policy, we introduce a rule that uses exchange market pressure (EMP), the

Derivation of asymptotic Vertical BarΔIVertical Bar = 1/2 rule

International Nuclear Information System (INIS)

Terasaki, K.; Oneda, S.

1982-01-01

It is argued that the origin of the observed approximate Vertical BarΔIVertical Bar = 1/2 rule is the presence of an asymptotic Vertical BarΔIVertical Bar = 1/2 rule which exists among certain two-body hadronic weak matrix elements, involving especially the ground-state hadrons

A Belief Rule-Based Expert System to Assess Bronchiolitis Suspicion from Signs and Symptoms Under Uncertainty

DEFF Research Database (Denmark)

Karim, Rezuan; Hossain, Mohammad Shahadat; Khalid, Md. Saifuddin

2017-01-01

developed generic belief rule-based inference methodology by using evidential reasoning (RIMER) acts as the inference engine of this BRBES while belief rule base as the knowledge representation schema. The knowledge base of the system is constructed by using real patient data and expert opinion from...

Collaboration rules.

Science.gov (United States)

Evans, Philip; Wolf, Bob

2005-01-01

Corporate leaders seeking to boost growth, learning, and innovation may find the answer in a surprising place: the Linux open-source software community. Linux is developed by an essentially volunteer, self-organizing community of thousands of programmers. Most leaders would sell their grandmothers for workforces that collaborate as efficiently, frictionlessly, and creatively as the self-styled Linux hackers. But Linux is software, and software is hardly a model for mainstream business. The authors have, nonetheless, found surprising parallels between the anarchistic, caffeinated, hirsute world of Linux hackers and the disciplined, tea-sipping, clean-cut world of Toyota engineering. Specifically, Toyota and Linux operate by rules that blend the self-organizing advantages of markets with the low transaction costs of hierarchies. In place of markets' cash and contracts and hierarchies' authority are rules about how individuals and groups work together (with rigorous discipline); how they communicate (widely and with granularity); and how leaders guide them toward a common goal (through example). Those rules, augmented by simple communication technologies and a lack of legal barriers to sharing information, create rich common knowledge, the ability to organize teams modularly, extraordinary motivation, and high levels of trust, which radically lowers transaction costs. Low transaction costs, in turn, make it profitable for organizations to perform more and smaller transactions--and so increase the pace and flexibility typical of high-performance organizations. Once the system achieves critical mass, it feeds on itself. The larger the system, the more broadly shared the knowledge, language, and work style. The greater individuals' reputational capital, the louder the applause and the stronger the motivation. The success of Linux is evidence of the power of that virtuous circle. Toyota's success is evidence that it is also powerful in conventional companies.

Decision Analysis of Dynamic Spectrum Access Rules

Energy Technology Data Exchange (ETDEWEB)

Juan D. Deaton; Luiz A. DaSilva; Christian Wernz

2011-12-01

A current trend in spectrum regulation is to incorporate spectrum sharing through the design of spectrum access rules that support Dynamic Spectrum Access (DSA). This paper develops a decision-theoretic framework for regulators to assess the impacts of different decision rules on both primary and secondary operators. We analyze access rules based on sensing and exclusion areas, which in practice can be enforced through geolocation databases. Our results show that receiver-only sensing provides insufficient protection for primary and co-existing secondary users and overall low social welfare. On the other hand, using sensing information between the transmitter and receiver of a communication link, provides dramatic increases in system performance. The performance of using these link end points is relatively close to that of using many cooperative sensing nodes associated to the same access point and large link exclusion areas. These results are useful to regulators and network developers in understanding in developing rules for future DSA regulation.

Automatic inference of indexing rules for MEDLINE

Directory of Open Access Journals (Sweden)

Shooshan Sonya E

2008-11-01

Full Text Available Abstract Background: Indexing is a crucial step in any information retrieval system. In MEDLINE, a widely used database of the biomedical literature, the indexing process involves the selection of Medical Subject Headings in order to describe the subject matter of articles. The need for automatic tools to assist MEDLINE indexers in this task is growing with the increasing number of publications being added to MEDLINE. Methods: In this paper, we describe the use and the customization of Inductive Logic Programming (ILP to infer indexing rules that may be used to produce automatic indexing recommendations for MEDLINE indexers. Results: Our results show that this original ILP-based approach outperforms manual rules when they exist. In addition, the use of ILP rules also improves the overall performance of the Medical Text Indexer (MTI, a system producing automatic indexing recommendations for MEDLINE. Conclusion: We expect the sets of ILP rules obtained in this experiment to be integrated into MTI.

Update of ESA EEE parts relifing rules

Science.gov (United States)

Le Blanc, P.; Aicardi, C.

2002-12-01

Storage of EEE part represents a key process in space electronics activity. In order to cope with projects time schedule on one hand and with economical procurement constraints on the other hand, parts are often to be stored for quite a long time. Obsolescence issues could make us to build strategic stock in order to be able to still manufacture equipments over time. Up to now several documents ruled the way to de-store (relifed) EEE part in such a way we are able to guaranty their reliability despite their long period of storage. None of these documents backed up their figures and rules with consistent approach and physics. No field return existed or was used to assess these rules. In the frame of a contract from CNES we established an updated rule taking into account field-return and failure mechanisms analysis .We ended up by a new storage and de-storage procedure that is to be included in the ECSS format.

A Hybrid Genetic Programming Algorithm for Automated Design of Dispatching Rules.

Science.gov (United States)

Nguyen, Su; Mei, Yi; Xue, Bing; Zhang, Mengjie

2018-06-04

Designing effective dispatching rules for production systems is a difficult and timeconsuming task if it is done manually. In the last decade, the growth of computing power, advanced machine learning, and optimisation techniques has made the automated design of dispatching rules possible and automatically discovered rules are competitive or outperform existing rules developed by researchers. Genetic programming is one of the most popular approaches to discovering dispatching rules in the literature, especially for complex production systems. However, the large heuristic search space may restrict genetic programming from finding near optimal dispatching rules. This paper develops a new hybrid genetic programming algorithm for dynamic job shop scheduling based on a new representation, a new local search heuristic, and efficient fitness evaluators. Experiments show that the new method is effective regarding the quality of evolved rules. Moreover, evolved rules are also significantly smaller and contain more relevant attributes.

NATO Advanced Research Workshop on Molecular Engineering for Advanced Materials

CERN Document Server

Schaumburg, Kjeld

1995-01-01

An important aspect of molecular engineering is the `property directed' synthesis of large molecules and molecular assemblies. Synthetic expertise has advanced to a state which allows the assembly of supramolecules containing thousands of atoms using a `construction kit' of molecular building blocks. Expansion in the field is driven by the appearance of new building blocks and by an improved understanding of the rules for joining them in the design of nanometer-sized devices. Another aspect is the transition from supramolecules to materials. At present no single molecule (however large) has been demonstrated to function as a device, but this appears to be only a matter of time. In all of this research, which has a strongly multidisciplinary character, both existing and yet to be developed analytical techniques are and will remain indispensable. All this and more is discussed in Molecular Engineering for Advanced Materials, which provides a masterly and up to date summary of one of the most challenging researc...

Experimental study of selection rules following from the existence of two types of neutrinos

International Nuclear Information System (INIS)

Gaillard, J.M.

1963-05-01

Interactions of high energy neutrinos with matter have been observed In the course of an experiment done in collaboration with G. Danby, K. Goulianos, L. M. Lederman, N. Mistry, M. Schwartz and J. Steinberger at the Brookhaven AGS. The neutrinos were produced mainly in the decay π ± → μ ± + υ(υ-bar); the experiment leads to the conclusion that thee neutrinos are very likely different from the ones produced in beta decay reactions. We use the result of this experiment to study the selection rules applicable in the framework of a two neutrino theory. (author) [fr

Engineering Education for a New Era

Science.gov (United States)

Ohgaki, Shinichiro

Engineering education is composed of five components, the idea what engineering education ought to be, the knowledge in engineering fields, those who learn engineering, those who teach engineering and the stakeholders in engineering issues. The characteristics of all these five components are changing with the times. When we consider the engineering education for the next era, we should analyze the changes of all five components. Especially the knowledge and tools in engineering fields has been expanding, and advanced science and technology is casting partly a dark shadow on the modern convenient life. Moral rules or ethics for developing new products and engineering systems are now regarded as most important in engineering fields. All those who take the responsibility for engineering education should understand the change of all components in engineering education and have a clear grasp of the essence of engineering for sustainable society.

Teaching Professional Engineering Skills

DEFF Research Database (Denmark)

Andersson, Niclas; Andersson, Pernille Hammar

2010-01-01

evaluations, a questionnaire, and discussions with students confirm a genuinely positive attitude towards the role play simulation. The students engage in the role play and express an increased understanding of the requirements and the implicit rules of real-life engineering. The interaction between students...

Modifications to the Rules of the CERN Health Insurance Scheme

CERN Multimedia

HR Department

2010-01-01

On the proposal of the CHIS Board, and following examination by the Standing Concertation Committee on 29 April 2010, the Director-General has approved the new Rules of the CERN Health Insurance Scheme, which will come into effect on 1 June 2010. The Rules will shortly be available on the CHIS web site. As the Rules had not been revised since 2003, it had become necessary to make certain changes in order to bring them into line with other texts (such as the Staff Rules and Regulations and Administrative Circulars) and to clarify some practices. The new Rules do not introduce any new benefits or remove any existing ones. The following changes will affect all insured members:   Description of change Articles in the new Rules Time limit for claiming reimbursement The time period is measured from the invoice date (instead of the date of treatment). ...

QUASI-ARBITRATION WITH REFERENCE TO FIDIC RULES

Directory of Open Access Journals (Sweden)

Vjekoslav Puljko

2016-07-01

Full Text Available Quasi-arbitration is a way of settling a dispute without going to court. While it is increasingly present in modern business practices, in Croatia only a few university professors have dealt with it. Therefore, the aim of this paper is to describe the procedure and its rules and bring it closer to potential users. In the introductory part, we briefly analyse the term quasi- arbitration. As the term has a lot in common with arbitration, we also analyse its relation with arbitration. The paper focuses on recent changes to the rules on technical arbitration of the International Chamber of Commerce (ICC because they can be used as a great guide for finding possible Croatian solutions. On the other hand, special attention has been paid to FIDIC rules since they exemplify the presence of quasi-arbitration clauses applied in Croatia, and the authors believe that they have become the standard for construction and engineering works financed by the cohesion and structural funds, which are of crucial importance for co-financing of infrastructure projects in Croatia. The authors’ opinion is that familiarising both experts and the general public with these rules may contribute to more transparent public procurement not only in public investment but also in private projects as they greatly facilitate business operation.

Heuristic simulation of nuclear systems on a supercomputer using the HAL-1987 general-purpose production-rule analysis system

International Nuclear Information System (INIS)

Ragheb, M.; Gvillo, D.; Makowitz, H.

1987-01-01

HAL-1987 is a general-purpose tool for the construction of production-rule analysis systems. It uses the rule-based paradigm from the part of artificial intelligence concerned with knowledge engineering. It uses backward-chaining and forward-chaining in an antecedent-consequent logic, and is programmed in Portable Standard Lisp (PSL). The inference engine is flexible and accommodates general additions and modifications to the knowledge base. The system is used in coupled symbolic-procedural programming adaptive methodologies for stochastic simulations. In Monte Carlo simulations of particle transport, the system considers the pre-processing of the input data to the simulation and adaptively controls the variance reduction process as the simulation progresses. This is accomplished through the use of a knowledge base of rules which encompass the user's expertise in the variance reduction process. It is also applied to the construction of model-based systems for monitoring, fault-diagnosis and crisis-alert in engineering devices, particularly in the field of nuclear reactor safety analysis

Engineering justice transforming engineering education and practice

CERN Document Server

Leydens, Jon A

2018-01-01

Using social justice as a catalyst for curricular transformation, Engineering Justice presents an examination of how politics, culture, and other social issues are inherent in the practice of engineering. It aims to align engineering curricula with socially just outcomes, increase enrollment among underrepresented groups, and lessen lingering gender, class, and ethnicity gaps by showing how the power of engineering knowledge can be explicitly harnessed to serve the underserved and address social inequalities. This book is meant to transform the way educators think about engineering curricula through creating or transforming existing courses to attract, retain, and motivate engineering students to become professionals who enact engineering for social justice. Engineering Justice offers thought-provoking chapters on: why social justice is inherent yet often invisible in engineering education and practice; engineering design for social justice; social justice in the engineering sciences; social justice in human...

Use of an expert system data analysis manager for space shuttle main engine test evaluation

Science.gov (United States)

Abernethy, Ken

1988-01-01

The ability to articulate, collect, and automate the application of the expertise needed for the analysis of space shuttle main engine (SSME) test data would be of great benefit to NASA liquid rocket engine experts. This paper describes a project whose goal is to build a rule-based expert system which incorporates such expertise. Experiential expertise, collected directly from the experts currently involved in SSME data analysis, is used to build a rule base to identify engine anomalies similar to those analyzed previously. Additionally, an alternate method of expertise capture is being explored. This method would generate rules inductively based on calculations made using a theoretical model of the SSME's operation. The latter rules would be capable of diagnosing anomalies which may not have appeared before, but whose effects can be predicted by the theoretical model.

26 CFR 1.446-1 - General rule for methods of accounting.

Science.gov (United States)

2010-04-01

.... Although a method of accounting may exist under this definition without the necessity of a pattern of... 26 Internal Revenue 6 2010-04-01 2010-04-01 false General rule for methods of accounting. 1.446-1... TAX (CONTINUED) INCOME TAXES Methods of Accounting § 1.446-1 General rule for methods of accounting...

Rule based deterioration identification and management system

International Nuclear Information System (INIS)

Kataoka, S.; Pavinich, W.; Lapides, M.

1993-01-01

Under the sponsorship of IHI and EPRI, a rule-based screening system has been developed that can be used by utility engineers to determine which deterioration mechanisms are acting on specific LWR components, and to evaluate the efficacy of an age-related deterioration management program. The screening system was developed using the rule-based shell, NEXPERT, which provides traceability to the data sources used in the logic development. The system addresses all the deterioration mechanisms of specific metals encountered in either BWRs or PWRs. Deterioration mechanisms are listed with reasons why they may occur during the design life of LWRs, considering the plant environment, manufacturing process, service history, material chemical composition, etc. of components in a specific location of a LWR. To eliminate the evaluation of inactive deterioration quickly, a tier structure is applied to the rules. The reasons why deterioration will occur are extracted automatically by backward chaining. To reduce the amount of user input, plant environmental data are stored in files as default environmental data. (author)

Agile Service Development: A Rule-Based Method Engineering Approach

NARCIS (Netherlands)

dr. Martijn Zoet; Stijn Hoppenbrouwers; Inge van de Weerd; Johan Versendaal

2011-01-01

Agile software development has evolved into an increasingly mature software development approach and has been applied successfully in many software vendors’ development departments. In this position paper, we address the broader agile service development. Based on method engineering principles we

Rule-based topology system for spatial databases to validate complex geographic datasets

Science.gov (United States)

Martinez-Llario, J.; Coll, E.; Núñez-Andrés, M.; Femenia-Ribera, C.

2017-06-01

A rule-based topology software system providing a highly flexible and fast procedure to enforce integrity in spatial relationships among datasets is presented. This improved topology rule system is built over the spatial extension Jaspa. Both projects are open source, freely available software developed by the corresponding author of this paper. Currently, there is no spatial DBMS that implements a rule-based topology engine (considering that the topology rules are designed and performed in the spatial backend). If the topology rules are applied in the frontend (as in many GIS desktop programs), ArcGIS is the most advanced solution. The system presented in this paper has several major advantages over the ArcGIS approach: it can be extended with new topology rules, it has a much wider set of rules, and it can mix feature attributes with topology rules as filters. In addition, the topology rule system can work with various DBMSs, including PostgreSQL, H2 or Oracle, and the logic is performed in the spatial backend. The proposed topology system allows users to check the complex spatial relationships among features (from one or several spatial layers) that require some complex cartographic datasets, such as the data specifications proposed by INSPIRE in Europe and the Land Administration Domain Model (LADM) for Cadastral data.

Plant management in concurrent engineering

International Nuclear Information System (INIS)

Haubensack, D.; Malvache, P.; Valleix, P.

1997-01-01

The ImagIn project consist in a method and a set of computer tools apt to bring perceptible and assessable improvements in the operational safety of a nuclear plant. Its aim is to design an information system that would maintain a highly detailed computerised representation of a nuclear plant, in its initial state and throughout its in-service life. It is not a tool to drive or help driving the nuclear plant, but a tool that manages concurrent operations that modify the plant configuration in a very general way (maintenance for example). The configuration of the plant, as well as rules and constraints about it, are described in a object-oriented, knowledge database, which is built using a generic ImagIn meta-model based on the semantical network theory. An inference engine works on this database and is connected to reality through interfaces to operators and captors on the installation; it verifies constantly in real-time the consistency of the database according to its inner rules, and reports eventual problems to concerned operators. A special effort is made on interfaces to provide natural and intuitive tools (using virtual reality, natural language, voice recognition and synthesis). A laboratory application on a fictive but realistic installation already exist and is used to simulate various test and scenari. A real application is being constructed on SILOE, an experimental reactor of the CEA. (authors)

LIS Professionals as Knowledge Engineers.

Science.gov (United States)

Poulter, Alan; And Others

1994-01-01

Considers the role of library and information science professionals as knowledge engineers. Highlights include knowledge acquisition, including personal experience, interviews, protocol analysis, observation, multidimensional sorting, printed sources, and machine learning; knowledge representation, including production rules and semantic nets;…

Agent-based re-engineering of ErbB signaling: a modeling pipeline for integrative systems biology.

Science.gov (United States)

Das, Arya A; Ajayakumar Darsana, T; Jacob, Elizabeth

2017-03-01

Experiments in systems biology are generally supported by a computational model which quantitatively estimates the parameters of the system by finding the best fit to the experiment. Mathematical models have proved to be successful in reverse engineering the system. The data generated is interpreted to understand the dynamics of the underlying phenomena. The question we have sought to answer is that - is it possible to use an agent-based approach to re-engineer a biological process, making use of the available knowledge from experimental and modelling efforts? Can the bottom-up approach benefit from the top-down exercise so as to create an integrated modelling formalism for systems biology? We propose a modelling pipeline that learns from the data given by reverse engineering, and uses it for re-engineering the system, to carry out in-silico experiments. A mathematical model that quantitatively predicts co-expression of EGFR-HER2 receptors in activation and trafficking has been taken for this study. The pipeline architecture takes cues from the population model that gives the rates of biochemical reactions, to formulate knowledge-based rules for the particle model. Agent-based simulations using these rules, support the existing facts on EGFR-HER2 dynamics. We conclude that, re-engineering models, built using the results of reverse engineering, opens up the possibility of harnessing the power pack of data which now lies scattered in literature. Virtual experiments could then become more realistic when empowered with the findings of empirical cell biology and modelling studies. Implemented on the Agent Modelling Framework developed in-house. C ++ code templates available in Supplementary material . liz.csir@gmail.com. Supplementary data are available at Bioinformatics online. © The Author 2016. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com

Product integration rules at Clenshaw-Curtis and related points: A robust implementation

International Nuclear Information System (INIS)

Adam, G.; Nobile, A.

1989-12-01

Product integration rules generalizing the Fejer, Clenshaw-Curtis and Filippi quadrature rules respectively are derived for integrals with trigonometric and hyperbolic weight factors. The study puts in evidence the existence of well-conditioned fully analytic solutions, in terms of hypergeometric functions 0 F 1 . An a priori error estimator is discussed which is shown both to avoid wasteful invocation of the integration rule and to increase significantly the robustness of the automatic quadrature procedure. Then, specializing to extended Clenshaw-Curtis (ECC) rules, three types of a posteriori error estimates are considered and the existence of a great risk of their failure is put into evidence by large scale validation tests. An empirical error estimator, superseding them at slowly varying integrands, is found to result in a spectacular increase in the output reliability. Finally, enhancements in the control of the interval subdivision strategy aiming at increasing code robustness is discussed. Comparison with the code DQAWO of QUADPACK, extending over a statistics of about hundred thousand solved integrals, is illustrative for the increased robustness and error estimate reliability of our computer code implementation of the ECC rules. (author). 19 refs, 8 tabs

Method of making an aero-derivative gas turbine engine

Science.gov (United States)

Wiebe, David J.

2018-02-06

A method of making an aero-derivative gas turbine engine (100) is provided. A combustor outer casing (68) is removed from an existing aero gas turbine engine (60). An annular combustor (84) is removed from the existing aero gas turbine engine. A first row of turbine vanes (38) is removed from the existing aero gas turbine engine. A can annular combustor assembly (122) is installed within the existing aero gas turbine engine. The can annular combustor assembly is configured to accelerate and orient combustion gasses directly onto a first row of turbine blades of the existing aero gas turbine engine. A can annular combustor assembly outer casing (108) is installed to produce the aero-derivative gas turbine engine (100). The can annular combustor assembly is installed within an axial span (85) of the existing aero gas turbine engine vacated by the annular combustor and the first row of turbine vanes.

Design and Analysis of Decision Rules via Dynamic Programming

KAUST Repository

Amin, Talha M.

2017-04-24

The areas of machine learning, data mining, and knowledge representation have many different formats used to represent information. Decision rules, amongst these formats, are the most expressive and easily-understood by humans. In this thesis, we use dynamic programming to design decision rules and analyze them. The use of dynamic programming allows us to work with decision rules in ways that were previously only possible for brute force methods. Our algorithms allow us to describe the set of all rules for a given decision table. Further, we can perform multi-stage optimization by repeatedly reducing this set to only contain rules that are optimal with respect to selected criteria. One way that we apply this study is to generate small systems with short rules by simulating a greedy algorithm for the set cover problem. We also compare maximum path lengths (depth) of deterministic and non-deterministic decision trees (a non-deterministic decision tree is effectively a complete system of decision rules) with regards to Boolean functions. Another area of advancement is the presentation of algorithms for constructing Pareto optimal points for rules and rule systems. This allows us to study the existence of “totally optimal” decision rules (rules that are simultaneously optimal with regards to multiple criteria). We also utilize Pareto optimal points to compare and rate greedy heuristics with regards to two criteria at once. Another application of Pareto optimal points is the study of trade-offs between cost and uncertainty which allows us to find reasonable systems of decision rules that strike a balance between length and accuracy.

Domain Engineering, A Software Engineering Discipline in Need of Research

DEFF Research Database (Denmark)

Bjørner, Dines

2000-01-01

. The aim of this paper is to advocate: that researchers study these development method components, and that universities focus their education on basing well-nigh any course on the use of formal techniques: Specification and verification, and that software engineers take heed: Start applying formal......, and these again seem more stable than software designs. Thus, almost like the universal laws of physics, it pays off to first develop theories of domains. But domain engineering, as in fact also requirements engineering, really is in need of thoroughly researched development principles, techniques and tools...... techniques. A brief example of describing stake-holder perspectives will be given - on the background of which we then proceed to survey the notions of domain intrinsics, domain support technologies, domain management & organisation, domain rules & regulations, domain human behaviour, etc. We show elsewhere...

Interesting association rule mining with consistent and inconsistent rule detection from big sales data in distributed environment

Directory of Open Access Journals (Sweden)

Dinesh J. Prajapati

2017-06-01

Full Text Available Nowadays, there is an increasing demand in mining interesting patterns from the big data. The process of analyzing such a huge amount of data is really computationally complex task when using traditional methods. The overall purpose of this paper is in twofold. First, this paper presents a novel approach to identify consistent and inconsistent association rules from sales data located in distributed environment. Secondly, the paper also overcomes the main memory bottleneck and computing time overhead of single computing system by applying computations to multi node cluster. The proposed method initially extracts frequent itemsets for each zone using existing distributed frequent pattern mining algorithms. The paper also compares the time efficiency of Mapreduce based frequent pattern mining algorithm with Count Distribution Algorithm (CDA and Fast Distributed Mining (FDM algorithms. The association generated from frequent itemsets are too large that it becomes complex to analyze it. Thus, Mapreduce based consistent and inconsistent rule detection (MR-CIRD algorithm is proposed to detect the consistent and inconsistent rules from big data and provide useful and actionable knowledge to the domain experts. These pruned interesting rules also give useful knowledge for better marketing strategy as well. The extracted consistent and inconsistent rules are evaluated and compared based on different interestingness measures presented together with experimental results that lead to the final conclusions.

Privacy-Preserving Detection of Inter-Domain SDN Rules Overlaps

KAUST Repository

Dethise, Arnaud

2017-08-24

SDN approaches to inter-domain routing promise better traffic engineering, enhanced security, and higher automation. Yet, naïve deployment of SDN on the Internet is dangerous as the control-plane expressiveness of BGP is significantly more limited than the data-plane expressiveness of SDN, which allows fine-grained rules to deflect traffic from BGP\\'s default routes. This mismatch may lead to incorrect forwarding behaviors such as forwarding loops and blackholes, ultimately hindering SDN deployment at the inter-domain level. In this work, we make a first step towards verifying the correctness of inter-domain forwarding state with a focus on loop freedom while keeping private the SDN rules, as they comprise confidential routing information. To this end, we design a simple yet powerful primitive that allows two networks to verify whether their SDN rules overlap, i.e., the set of packets matched by these rules is non-empty, without leaking any information about the SDN rules. We propose an efficient implementation of this primitive by using recent advancements in Secure Multi-Party Computation and we then leverage it as the main building block for designing a system that detects Internet-wide forwarding loops among any set of SDN-enabled Internet eXchange Points.

Checking Flight Rules with TraceContract: Application of a Scala DSL for Trace Analysis

Science.gov (United States)

Barringer, Howard; Havelund, Klaus; Morris, Robert A.

2011-01-01

Typically during the design and development of a NASA space mission, rules and constraints are identified to help reduce reasons for failure during operations. These flight rules are usually captured in a set of indexed tables, containing rule descriptions, rationales for the rules, and other information. Flight rules can be part of manual operations procedures carried out by humans. However, they can also be automated, and either implemented as on-board monitors, or as ground based monitors that are part of a ground data system. In the case of automated flight rules, one considerable expense to be addressed for any mission is the extensive process by which system engineers express flight rules in prose, software developers translate these requirements into code, and then both experts verify that the resulting application is correct. This paper explores the potential benefits of using an internal Scala DSL for general trace analysis, named TRACECONTRACT, to write executable specifications of flight rules. TRACECONTRACT can generally be applied to analysis of for example log files or for monitoring executing systems online.

An Embedded Rule-Based Diagnostic Expert System in Ada

Science.gov (United States)

Jones, Robert E.; Liberman, Eugene M.

1992-01-01

Ada is becoming an increasingly popular programming language for large Government-funded software projects. Ada with it portability, transportability, and maintainability lends itself well to today's complex programming environment. In addition, expert systems have also assumed a growing role in providing human-like reasoning capability expertise for computer systems. The integration is discussed of expert system technology with Ada programming language, especially a rule-based expert system using an ART-Ada (Automated Reasoning Tool for Ada) system shell. NASA Lewis was chosen as a beta test site for ART-Ada. The test was conducted by implementing the existing Autonomous Power EXpert System (APEX), a Lisp-based power expert system, in ART-Ada. Three components, the rule-based expert systems, a graphics user interface, and communications software make up SMART-Ada (Systems fault Management with ART-Ada). The rules were written in the ART-Ada development environment and converted to Ada source code. The graphics interface was developed with the Transportable Application Environment (TAE) Plus, which generates Ada source code to control graphics images. SMART-Ada communicates with a remote host to obtain either simulated or real data. The Ada source code generated with ART-Ada, TAE Plus, and communications code was incorporated into an Ada expert system that reads the data from a power distribution test bed, applies the rule to determine a fault, if one exists, and graphically displays it on the screen. The main objective, to conduct a beta test on the ART-Ada rule-based expert system shell, was achieved. The system is operational. New Ada tools will assist in future successful projects. ART-Ada is one such tool and is a viable alternative to the straight Ada code when an application requires a rule-based or knowledge-based approach.

Design rules for piping: Plastic stability of straight parts under level D loadings

International Nuclear Information System (INIS)

Touboul, F.; Ben Djidia, M.; Acker, D.

1989-01-01

Design rules for piping, elaborated for Fast Breeder Reactors, are based on analysis performed for Pressure Water Reactors. Interpretation of largely diversified straight parts tests, enable us to validate and improve existing rules and to propose a more suitable formula. Design rules for piping appear to be non conservative for austenitic thin tubes in bending or torsion. By introducing a B 2 coefficient, geometrically dependent, the gap between thin and thick tubes may be withheld. Conservatism of rules can be ensured by considering the allowable stress defined by ASME, Section III, Appendix F

Business rules for creating process flexibility : Mapping RIF rules and BDI rules

NARCIS (Netherlands)

Gong, Y.; Overbeek, S.J.; Janssen, M.

2011-01-01

Business rules and software agents can be used for creating flexible business processes. The Rule Interchange Format (RIF) is a new W3C recommendation standard for exchanging rules among disparate systems. Yet, the impact that the introduction of RIF has on the design of flexible business processes

From Human Activity to Conceptual Understanding of the Chain Rule

Science.gov (United States)

Jojo, Zingiswa Mybert Monica; Maharaj, Aneshkumar; Brijlall, Deonarain

2013-01-01

This article reports on a study which investigated first year university engineering students' construction of the definition of the concept of the chain rule in differential calculus at a University of Technology in South Africa. An APOS (Action-Process-Objects-Schema) approach was used to explore conceptual understanding displayed by students in…

A Belief Rule Based Expert System to Assess Mental Disorder under Uncertainty

DEFF Research Database (Denmark)

Hossain, Mohammad Shahadat; Afif Monrat, Ahmed; Hasan, Mamun

2016-01-01

to ignorance, incompleteness, and randomness. So, a belief rule-based expert system (BRBES) has been designed and developed with the capability of handling the uncertainties mentioned. Evidential reasoning works as the inference engine and the belief rule base as the knowledge representation schema......Mental disorder is a change of mental or behavioral pattern that causes sufferings and impairs the ability to function in ordinary life. In psychopathology, the assessment methods of mental disorder contain various types of uncertainties associated with signs and symptoms. This study identifies...

GMO neighbourhoods - will co-existence be a geographically realistic possibility?

DEFF Research Database (Denmark)

Qvist, H. Witt; Lundsgaard, H.; Brandt, Jesper

2006-01-01

In Denmark, there has been widespread opposition to the use of Genetically Modified Organisms (GMO’s) as a result of which rules have been developed relating to the co-existence of GM, conventionally and organically produced crops. This has been in the form of a spatially elaborated implementation...

A Comparative Analysis of Fuzzy Inference Engines in Context of ...

African Journals Online (AJOL)

PROF. O. E. OSUAGWU

Fuzzy Inference engine is an important part of reasoning systems capable of extracting correct conclusions from ... is known as the inference, or rule definition portion, of fuzzy .... minimal set of decision rules based on input- ... The study uses Mamdani FIS model and. Sugeno FIS ... control of induction motor drive. [18] study.

Rule-Based Event Processing and Reaction Rules

Science.gov (United States)

Paschke, Adrian; Kozlenkov, Alexander

Reaction rules and event processing technologies play a key role in making business and IT / Internet infrastructures more agile and active. While event processing is concerned with detecting events from large event clouds or streams in almost real-time, reaction rules are concerned with the invocation of actions in response to events and actionable situations. They state the conditions under which actions must be taken. In the last decades various reaction rule and event processing approaches have been developed, which for the most part have been advanced separately. In this paper we survey reaction rule approaches and rule-based event processing systems and languages.

APPLICATION OF ROUGH SET THEORY TO MAINTENANCE LEVEL DECISION-MAKING FOR AERO-ENGINE MODULES BASED ON INCREMENTAL KNOWLEDGE LEARNING

Institute of Scientific and Technical Information of China (English)

陆晓华; 左洪福; 蔡景

2013-01-01

The maintenance of an aero-engine usually includes three levels ,and the maintenance cost and period greatly differ depending on the different maintenance levels .To plan a reasonable maintenance budget program , airlines would like to predict the maintenance level of aero-engine before repairing in terms of performance parame-ters ,which can provide more economic benefits .The maintenance level decision rules are mined using the histori-cal maintenance data of a civil aero-engine based on the rough set theory ,and a variety of possible models of upda-ting rules produced by newly increased maintenance cases added to the historical maintenance case database are in-vestigated by the means of incremental machine learning .The continuously updated rules can provide reasonable guidance suggestions for engineers and decision support for planning a maintenance budget program before repai-ring .The results of an example show that the decision rules become more typical and robust ,and they are more accurate to predict the maintenance level of an aero-engine module as the maintenance data increase ,which illus-trates the feasibility of the represented method .

77 FR 50500 - California State Nonroad Engine Pollution Control Standards; California Nonroad Compression...

Science.gov (United States)

2012-08-21

... ENVIRONMENTAL PROTECTION AGENCY [AMS-FRL 9716-8] California State Nonroad Engine Pollution Control Standards; California Nonroad Compression Ignition Engines--In-Use Fleets; Authorization Request... emissions control of new engines not listed under section 209(e)(1). The section 209(e) rule and its...

Learning Expressive Linkage Rules for Entity Matching using Genetic Programming

OpenAIRE

Isele, Robert

2013-01-01

A central problem in data integration and data cleansing is to identify pairs of entities in data sets that describe the same real-world object. Many existing methods for matching entities rely on explicit linkage rules, which specify how two entities are compared for equivalence. Unfortunately, writing accurate linkage rules by hand is a non-trivial problem that requires detailed knowledge of the involved data sets. Another important issue is the efficient execution of link...

Architecture of Environmental Engineering

DEFF Research Database (Denmark)

Wenzel, Henrik; Alting, Leo

2006-01-01

An architecture of Environmental Engineering has been developed comprising the various disciplines and tools involved. It identifies industry as the major actor and target group, and it builds on the concept of Eco-efficiency. To improve Eco-efficiency, there is a limited number of intervention......-efficiency is the aim of Environmental Engineering, the discipline of synthesis – design and creation of solutions – will form a core pillar of the architecture. Other disciplines of Environmental Engineering exist forming the necessary background and frame for the synthesis. Environmental Engineering, thus, in essence...... comprise the disciplines of: management, system description & inventory, analysis & assessment, prioritisation, synthesis, and communication, each existing at all levels of intervention. The developed architecture of Environmental Engineering, thus, consists of thirty individual disciplines, within each...

Architecture of Environmental Engineering

DEFF Research Database (Denmark)

Wenzel, Henrik; Alting, Leo

2004-01-01

An architecture of Environmental Engineering has been developed comprising the various disciplines and tools involved. It identifies industry as the major actor and target group, and it builds on the concept of Eco-efficiency. To improve Eco-efficiency, there is a limited number of intervention...... of Eco-efficiency is the aim of Environmental Engineering, the discipline of synthesis – design and creation of solutions – will form a core pillar of the architecture. Other disciplines of Environmental Engineering exist forming the necessary background and frame for the synthesis. Environmental...... Engineering, thus, in essence comprise the disciplines of: management, system description & inventory, analysis & assessment, prioritisation, synthesis, and communication, each existing at all levels of intervention. The developed architecture of Environmental Engineering, thus, consists of thirty individual...

Does a target-capacity utilization rule fulfill OPEC's economic objectives?

International Nuclear Information System (INIS)

Suranovic, S.M.

1993-01-01

This paper uses the United States (US) Energy Information Administration's Oil Market Organization of Petroleum Exporting Countries Simulation model to evaluate the ability of a target-capacity rule to satisfy OPEC's economic objectives. We show that when demand and supply lags exist OPEC's optimal price path may consist of periods of low prices followed by a one or two period price shock. The TCU rule does not display periodic price shocks and thus generates less discounted revenue over the planning period. The TCU rule comes closest to the optimum either when there are no lags or when OPEC optimizes subject to a minimum revenue constraint. (author)

Mechanisms of rule acquisition and rule following in inductive reasoning.

Science.gov (United States)

Crescentini, Cristiano; Seyed-Allaei, Shima; De Pisapia, Nicola; Jovicich, Jorge; Amati, Daniele; Shallice, Tim

2011-05-25

Despite the recent interest in the neuroanatomy of inductive reasoning processes, the regional specificity within prefrontal cortex (PFC) for the different mechanisms involved in induction tasks remains to be determined. In this study, we used fMRI to investigate the contribution of PFC regions to rule acquisition (rule search and rule discovery) and rule following. Twenty-six healthy young adult participants were presented with a series of images of cards, each consisting of a set of circles numbered in sequence with one colored blue. Participants had to predict the position of the blue circle on the next card. The rules that had to be acquired pertained to the relationship among succeeding stimuli. Responses given by subjects were categorized in a series of phases either tapping rule acquisition (responses given up to and including rule discovery) or rule following (correct responses after rule acquisition). Mid-dorsolateral PFC (mid-DLPFC) was active during rule search and remained active until successful rule acquisition. By contrast, rule following was associated with activation in temporal, motor, and medial/anterior prefrontal cortex. Moreover, frontopolar cortex (FPC) was active throughout the rule acquisition and rule following phases before a rule became familiar. We attributed activation in mid-DLPFC to hypothesis generation and in FPC to integration of multiple separate inferences. The present study provides evidence that brain activation during inductive reasoning involves a complex network of frontal processes and that different subregions respond during rule acquisition and rule following phases.

Making room in engineering design practices

DEFF Research Database (Denmark)

Petersen, Rikke Premer; Buch, Anders

2016-01-01

This article aims to explore the challenges that occur from a practice perspective when a new approach to engineering design enters an existing ecology of professional practices in a workplace. Using four empirical episodes, the article illustrates a concrete effort to challenge what counts...... as ‘real engineering’ or what is recognized as part of the engineering expertise. Using an ethnographic, case-studybased research design the article documentshowholistically minded professionals do engineering design ‘by other means’, in ways that strive to promote user experience approaches. The article...... aims to show how engineering practices do not exist in isolation within an organization and how ambitions to transform professional engineering work practices require a change in the very ecologies of practices that exist across an organization...

Combination Rules for Morse-Based van der Waals Force Fields.

Science.gov (United States)

Yang, Li; Sun, Lei; Deng, Wei-Qiao

2018-02-15

In traditional force fields (FFs), van der Waals interactions have been usually described by the Lennard-Jones potentials. Conventional combination rules for the parameters of van der Waals (VDW) cross-termed interactions were developed for the Lennard-Jones based FFs. Here, we report that the Morse potentials were a better function to describe VDW interactions calculated by highly precise quantum mechanics methods. A new set of combination rules was developed for Morse-based FFs, in which VDW interactions were described by Morse potentials. The new set of combination rules has been verified by comparing the second virial coefficients of 11 noble gas mixtures. For all of the mixed binaries considered in this work, the combination rules work very well and are superior to all three other existing sets of combination rules reported in the literature. We further used the Morse-based FF by using the combination rules to simulate the adsorption isotherms of CH 4 at 298 K in four covalent-organic frameworks (COFs). The overall agreement is great, which supports the further applications of this new set of combination rules in more realistic simulation systems.

CFC rules in the context of the proposed CCCTB directive

Directory of Open Access Journals (Sweden)

Veronika Sobotková

2011-01-01

Full Text Available In the proposal for a Council Directive on a Common Consolidated Corporate Tax Base (CCCTB there have been introduced a specific anti-abuse provisions, CFC rules. These rules are aimed at tax evasions and tax avoidance. The basic principle is the protection of the tax base against erosion through practices of artificial income shifting. Generally, CFC rules prevent tax avoidance in a state of a shareholder by denying the deferred taxation of profits generated by its controlled company, which is a resident in a tax preference jurisdiction. Even thought the CCCTB directive would be aided easier and low-costs cross-border business as well as it would be restricted the harmful tax competition there are questions whether it is advisable to introduce these rules into such system of the CCCTB, whether these rules are compatible with the CCCTB and whether it is regulated properly. So, the focus of this paper rests on the interaction of the proposed CCCTB directive with existing CFC rules in the European Union. The paper deals with pros and cons, economic and legal perspectives these rules in the context of the proposed CCCTB directive.

Phonological reduplication in sign language: rules rule

Directory of Open Access Journals (Sweden)

Iris eBerent

2014-06-01

Full Text Available Productivity—the hallmark of linguistic competence—is typically attributed to algebraic rules that support broad generalizations. Past research on spoken language has documented such generalizations in both adults and infants. But whether algebraic rules form part of the linguistic competence of signers remains unknown. To address this question, here we gauge the generalization afforded by American Sign Language (ASL. As a case study, we examine reduplication (X→XX—a rule that, inter alia, generates ASL nouns from verbs. If signers encode this rule, then they should freely extend it to novel syllables, including ones with features that are unattested in ASL. And since reduplicated disyllables are preferred in ASL, such rule should favor novel reduplicated signs. Novel reduplicated signs should thus be preferred to nonreduplicative controls (in rating, and consequently, such stimuli should also be harder to classify as nonsigns (in the lexical decision task. The results of four experiments support this prediction. These findings suggest that the phonological knowledge of signers includes powerful algebraic rules. The convergence between these conclusions and previous evidence for phonological rules in spoken language suggests that the architecture of the phonological mind is partly amodal.

q-state Potts-glass neural network based on pseudoinverse rule

International Nuclear Information System (INIS)

Xiong Daxing; Zhao Hong

2010-01-01

We study the q-state Potts-glass neural network with the pseudoinverse (PI) rule. Its performance is investigated and compared with that of the counterpart network with the Hebbian rule instead. We find that there exists a critical point of q, i.e., q cr =14, below which the storage capacity and the retrieval quality can be greatly improved by introducing the PI rule. We show that the dynamics of the neural networks constructed with the two learning rules respectively are quite different; but however, regardless of the learning rules, in the q-state Potts-glass neural networks with q≥3 there is a common novel dynamical phase in which the spurious memories are completely suppressed. This property has never been noticed in the symmetric feedback neural networks. Free from the spurious memories implies that the multistate Potts-glass neural networks would not be trapped in the metastable states, which is a favorable property for their applications.

Integrating UAV Flight outputs in Esri's CityEngine for semi-urban areas

Science.gov (United States)

Anca, Paula; Vasile, Alexandru; Sandric, Ionut

2016-04-01

One of the most pervasive technologies of recent years, which has crossed over into consumer products due to its lowering prince, is the UAV, commonly known as drones. Besides its ever-more accessible prices and growing functionality, what is truly impressive is the drastic reduction in processing time, from days to ours: from the initial flight preparation to the final output. This paper presents such a workflow and goes further by integrating the outputs into another growing technology: 3D. The software used for this purpose is Esri's CityEngine, which was developed for modeling 3D urban environments using existing 2D GIS data and computer generated architecture (CGA) rules, instead of modeling each feature individually. A semi-urban areas was selected for this study and captured using the E-Bee from Parrot. The output point cloud elevation from the E-Bee flight was transformed into a raster in order to be used as an elevation surface in CityEngine, and the mosaic raster dataset was draped over this surface. In order to model the buildings in this area CGA rules were written using the building footprints, as inputs, in the form of Feature Classes. The extrusion heights for the buildings were also extracted from the point cloud, and realistic textures were draped over the 3D building models. Finally the scene was shared as a 3D web-scene which can be accessed by anyone through a link, without any software besides an internet browser. This can serve as input for Smart City development through further analysis for urban ecology Keywords: 3D, drone, CityEngine, E-Bee, Esri, scene, web-scene

Implications of Derived Rule Following of Roulette Gambling for Clinical Practice.

Science.gov (United States)

Wilson, Alyssa N; Grant, Tara

2015-05-01

Problem gambling is a global concern, and behavior analytic attention has increasingly focused on reasons for why problem gambling occurs and conditions under which it is maintained. However, limited knowledge currently exists on the process to which self-generated rules maintain gambling behaviors. Therefore, the current study assessed six recreational gamblers on a roulette game before and after discrimination training to establish a self-rule to wager on red or black. Following discrimination training, all six participants altered their response allocation among red or black and consistently responded according to the newly derived self-rule. Results maintained during 1-week follow-up sessions across all participants. Implications for clinical application of self-awareness and self-generated rule following are discussed. Implications for practice • Demonstration of how stimuli such as color can alter gambling behavior • Procedures to assist clients with changing self-rules about gambling behavior • Using self-generated rule formulation for more contextually appropriate target behaviors • Highlights how self-generated rules can be altered to change clinical target behaviors.

互联网金融与现行监管规则%Internet Finance and Existing Regulatory Rules

Institute of Scientific and Technical Information of China (English)

叶旺春

2014-01-01

Internet Finance is relatively independent from the traditional ifnancial industry. As an innovative thing, it inevitably challenges the present ifnancial regulation. If we require Internet ifnance to adapt to existing rules, it is dififcult for the development of the Internet ifnance to continue. The technique is often ahead of supervision, and the rapid development of the Internet ifnance relfects the lags and omissions of some ifnancial regulation, which should be timely modiifed. Protecting ifnancial consumers should be established as the center of the supervision system for Internet ifnance.%互联网金融是一个相对独立于传统金融的业态，其作为创新事物，难免对现行金融监管规则形成冲击和挑战。如果一味要求互联网金融适应既有规则，则互联网金融的发展很难持续。由于技术往往领先于监管，互联网金融的快速发展，衬托了某些金融监管规则的滞后与疏漏，应及时反思、调整不合时宜的既有规则，建立以保护金融消费者为中心的互联网金融监管体系。

Existence and Policy Effectiveness in Feedback Nash LQ-Games

Directory of Open Access Journals (Sweden)

Nicola Acocella

2008-12-01

Full Text Available This paper illustrates how the classical theory of economic policy can profitably be used to verify some properties of the Linear Nash Feedback Equilibrium in difference LQ-games. In particular, we find that both a necessary condition for the equilibrium existence and a sufficient condition for policy ineffectiveness can be defined in the terms of the simple Tinbergen counting rule.

18 CFR 385.104 - Rule of construction (Rule 104).

Science.gov (United States)

2010-04-01

... Definitions § 385.104 Rule of construction (Rule 104). To the extent that the text of a rule is inconsistent with its caption, the text of the rule controls. [Order 376, 49 FR 21705, May 23, 1984] ...

Comparing empirical results of transaction avoidance rules studies

NARCIS (Netherlands)

van Dijck, G.

2008-01-01

Empirical legal research in the UK and in the Netherlands has provided data on the extent to which the transaction avoidance rules (avoidance powers, actio Pauliana) generate practical problems. This article’s goal is to explore the similarities and differences of the data. To achieve this, existing

75 FR 52860 - Final Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando...

Science.gov (United States)

2010-08-30

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 21 Final Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando Helicopter Airways (OHA), Inc... Existence of Proposed Airworthiness Design Standards for Acceptance Under the Primary Category Rule; Orlando...

A new methodology for the study of FAC phenomenon based on a fuzzy rule system

International Nuclear Information System (INIS)

Ferreira Guimaraes, Antonio Cesar

2003-01-01

This work consists of the representation of the corrosion problem, FAC - 'Flow-Accelerated Corrosion' in components, structures and passive systems in a nuclear power plant with aging, through a fuzzy rules system, in substitution to the conventional modeling and experimental analyses. Using data characteristic of the nature of the problem to be analyzed, a reduced number of rules can be establish to represent the actual problem. The results can be visualized in a very satisfactory way thus providing the engineer with the knowledge to work in the space of solution of rules to do the necessary inferences

Combined generation of heat and power in central heating systems. Design rules for fitting in; Warmte/kracht in cv-systemen. Ontwerpregels voor inpassing

Energy Technology Data Exchange (ETDEWEB)

Wammes, J.A. [Emicon, Veenendaal (Netherlands); Tijs, J.C. [Tijs Energy Systems, Wijk bij Duurstede (Netherlands); Rulkens, L.J.W. [FD-Bouwzaken/LNV, Wageningen (Netherlands)

1997-03-01

Carefully thought-out integration, a technical and financial feasibility analysis and telemetry are the key concepts in the successful incorporation of total energy (combined heat and power) units into new or existing heating systems. Based on extensive experience with total energy plants, a number of consultants, engineers and suppliers operating in this broad field, on the initiative of the Central Netherlands Gas Company (Gasbedrijf Centraal Nederland) in Utrecht and the Gasunie energy company in Groningen, both in the Netherlands have published a manual entitled `Design rules for incorporating total energy units into central heating systems`. 2 figs., 3 ills., 5 refs. 3 figs., 4 ills., 1 tab.

FeynRules - Feynman rules made easy

OpenAIRE

Christensen, Neil D.; Duhr, Claude

2008-01-01

In this paper we present FeynRules, a new Mathematica package that facilitates the implementation of new particle physics models. After the user implements the basic model information (e.g. particle content, parameters and Lagrangian), FeynRules derives the Feynman rules and stores them in a generic form suitable for translation to any Feynman diagram calculation program. The model can then be translated to the format specific to a particular Feynman diagram calculator via F...

VIP: A knowledge-based design aid for the engineering of space systems

Science.gov (United States)

Lewis, Steven M.; Bellman, Kirstie L.

1990-01-01

The Vehicles Implementation Project (VIP), a knowledge-based design aid for the engineering of space systems is described. VIP combines qualitative knowledge in the form of rules, quantitative knowledge in the form of equations, and other mathematical modeling tools. The system allows users rapidly to develop and experiment with models of spacecraft system designs. As information becomes available to the system, appropriate equations are solved symbolically and the results are displayed. Users may browse through the system, observing dependencies and the effects of altering specific parameters. The system can also suggest approaches to the derivation of specific parameter values. In addition to providing a tool for the development of specific designs, VIP aims at increasing the user's understanding of the design process. Users may rapidly examine the sensitivity of a given parameter to others in the system and perform tradeoffs or optimizations of specific parameters. A second major goal of VIP is to integrate the existing corporate knowledge base of models and rules into a central, symbolic form.

Forget the rules and innovate: contesting a myopic view on the impact of rules on innovation

OpenAIRE

olde Scholtenhuis, Léon Luc; Doree, Andries G.

2017-01-01

A persisting stance in practice is that obliteration of rules creates innovation paradise. Although it seems tempting, this view neglects that regulations may also constructively support innovation adoption processes. To stress these different roles that exist between regulation and innovation, scholars call for a careful empirical analysis of innovation contexts. Recent CM case studies, therefore, explore how standards emerge in new practices. Despite this, however, literature limitedly addr...

46 CFR 50.05-5 - Existing boilers, pressure vessels or piping systems.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Existing boilers, pressure vessels or piping systems. 50... ENGINEERING GENERAL PROVISIONS Application § 50.05-5 Existing boilers, pressure vessels or piping systems. (a) Whenever doubt exists as to the safety of an existing boiler, pressure vessel, or piping system, the marine...

76 FR 75570 - Self-Regulatory Organizations; The Depository Trust Company; Notice of Filing of Proposed Rule...

Science.gov (United States)

2011-12-02

...-DTC-2008-15]. DTC also seeks to conform the language of its existing procedures pertaining to...'s Web site at http://www.dtcc.com/legal/rule_filings/dtc/2011.php . (2) The proposed rule change is...

MODELS OF PROJECT REVERSE ENGINEERING

Directory of Open Access Journals (Sweden)

Віктор Володимирович ІВАНОВ

2017-03-01

Full Text Available Reverse engineering decided important scientific and technical problems of increasing the cost of the existing technical product by transforming it into a product with other features or design. Search ideas of the new application of existing products on the base of heuristic analysis were created. The concept of reverse engineering and its division into three types: conceptual, aggregate and complete was expanded. The use of heuristic methods for reverse engineering concept was showed. The modification model of Reverse engineering based on the model of РМВОК was developed. Our model includes two new phases: identification and transformation. At the identification phase, technical control is made. At the transformation phase, search heuristic idea of the new applied existing technical product was made. The model of execution phase that included heuristic methods, metrological equipment, and CAD/CAM/CAE program complex was created. The model that connected economic indicators of reverse engineering project was developed.

"Genetic Engineering" Gains Momentum (Science/Society Case Study).

Science.gov (United States)

Moore, John W.; Moore, Elizabeth A., Eds.

1980-01-01

Reviews the benefits and hazards of genetic engineering, or "recombinant-DNA" research. Recent federal safety rules issued by NIH which ease the strict prohibitions on recombinant-DNA research are explained. (CS)

Using blocking approach to preserve privacy in classification rules by inserting dummy Transaction

Directory of Open Access Journals (Sweden)

Doryaneh Hossien Afshari

2017-03-01

Full Text Available The increasing rate of data sharing among organizations could maximize the risk of leaking sensitive knowledge. Trying to solve this problem leads to increase the importance of privacy preserving within the process of data sharing. In this study is focused on privacy preserving in classification rules mining as a technique of data mining. We propose a blocking algorithm to hiding sensitive classification rules. In the solution, rules' hiding occurs as a result of editing a set of transactions which satisfy sensitive classification rules. The proposed approach tries to deceive and block adversaries by inserting some dummy transactions. Finally, the solution has been evaluated and compared with other available solutions. Results show that limiting the number of attributes existing in each sensitive rule will lead to a decrease in both the number of lost rules and the production rate of ghost rules.

Systems Engineering Leadership Development: Advancing Systems Engineering Excellence

Science.gov (United States)

Hall, Phil; Whitfield, Susan

2011-01-01

This slide presentation reviews the Systems Engineering Leadership Development Program, with particular emphasis on the work being done in the development of systems engineers at Marshall Space Flight Center. There exists a lack of individuals with systems engineering expertise, in particular those with strong leadership capabilities, to meet the needs of the Agency's exploration agenda. Therefore there is a emphasis on developing these programs to identify and train systems engineers. The presentation reviews the proposed MSFC program that includes course work, and developmental assignments. The formal developmental programs at the other centers are briefly reviewed, including the Point of Contact (POC)

Integrating existing radiation monitors into a microprocessor-based display system

International Nuclear Information System (INIS)

Kalita, R, S.; Bartucci, C.M.; Mason, R.G.; Greaves, C.

1992-01-01

Plantwide digital radiation monitoring systems (RMSs) have been generally installed as part of the original design for newer nuclear reactors. For older plants, area and process radiation monitors were either analog or a combination of analog and digital but were not part of an integrated system design. At some plants, individual monitors have been replaced or modified, resulting in a rainbow of different monitors and vendors being represented at the plant. Usually at some point, consideration is given to replacing these monitors with a state-of-the-art RMS to improve overall reliability and achieve the benefits of sound human factors engineering. This can be a very costly project in terms of expenditures for engineering, equipment, construction, startup, and time. When human engineering deficiencies (HEDs) became an issue at Zion station, Commonwealth Edison elected to install a computer-based radiation monitoring display system (RMDS) that would interface existing raidation monitors. After reviewing the existing as-built RMS configuration and internal circuits of the various monitors, it was concluded that a microprocessor-based RMDS could be successfully designed and installed that would solve the HEDs and would tie the older analog channels into a system configuration. Although in many cases, internal modifications were made to existing RMS monitors, the RMDS upgrade allowed the existing RMS monitors to retain their original functionality and location

Why microbes will rule the world – and our industries

DEFF Research Database (Denmark)

Lykke, Anne Wärme; Palsson, Bernhard; Nielsen, Jens

2017-01-01

Microbes have ruled the world for approximately 4 billion years. But the future actually depends on their dominance, some would argue. Why? Because microbes, as well as mammalian cells, can be engineered into producing high-value chemicals and medicine. Therefore, scientists at The Novo Nordisk...... Foundation Center for Biosustainability are hard at work developing cell factories to benefit us all....

Exploiting deterministic maintenance opportunity windows created by conservative engineering design rules that result in free time locked into large high-speed coupled production lines with finite buffers

Directory of Open Access Journals (Sweden)

Durandt, Casper

2016-08-01

Full Text Available Conservative engineering design rules for large serial coupled production processes result in machines having locked-in free time (also called ‘critical downtime’ or ‘maintenance opportunity windows’, which cause idle time if not used. Operators are not able to assess a large production process holistically, and so may not be aware that they form the current bottleneck – or that they have free time available due to interruptions elsewhere. A real-time method is developed to accurately calculate and display free time in location and magnitude, and efficiency improvements are demonstrated in large-scale production runs.

Discovering H-bonding rules in crystals with inductive logic programming.

Science.gov (United States)

Ando, Howard Y; Dehaspe, Luc; Luyten, Walter; Van Craenenbroeck, Elke; Vandecasteele, Henk; Van Meervelt, Luc

2006-01-01

In the domain of crystal engineering, various schemes have been proposed for the classification of hydrogen bonding (H-bonding) patterns observed in 3D crystal structures. In this study, the aim is to complement these schemes with rules that predict H-bonding in crystals from 2D structural information only. Modern computational power and the advances in inductive logic programming (ILP) can now provide computational chemistry with the opportunity for extracting structure-specific rules from large databases that can be incorporated into expert systems. ILP technology is here applied to H-bonding in crystals to develop a self-extracting expert system utilizing data in the Cambridge Structural Database of small molecule crystal structures. A clear increase in performance was observed when the ILP system DMax was allowed to refer to the local structural environment of the possible H-bond donor/acceptor pairs. This ability distinguishes ILP from more traditional approaches that build rules on the basis of global molecular properties.

New Safety rules

CERN Multimedia

Safety Commission

2008-01-01

The revision of CERN Safety rules is in progress and the following new Safety rules have been issued on 15-04-2008: Safety Procedure SP-R1 Establishing, Updating and Publishing CERN Safety rules: http://cern.ch/safety-rules/SP-R1.htm; Safety Regulation SR-S Smoking at CERN: http://cern.ch/safety-rules/SR-S.htm; Safety Regulation SR-M Mechanical Equipment: http://cern.ch/safety-rules/SR-M.htm; General Safety Instruction GSI-M1 Standard Lifting Equipment: http://cern.ch/safety-rules/GSI-M1.htm; General Safety Instruction GSI-M2 Standard Pressure Equipment: http://cern.ch/safety-rules/GSI-M2.htm; General Safety Instruction GSI-M3 Special Mechanical Equipment: http://cern.ch/safety-rules/GSI-M3.htm. These documents apply to all persons under the Director General’s authority. All Safety rules are available at the web page: http://www.cern.ch/safety-rules The Safety Commission

Knowledge rule base for the beam optics program TRACE 3-D

International Nuclear Information System (INIS)

Gillespie, G.H.; Van Staagen, P.K.; Hill, B.W.

1993-01-01

An expert system type of knowledge rule base has been developed for the input parameters used by the particle beam transport program TRACE 3-D. The goal has been to provide the program's user with adequate on-screen information to allow him to initially set up a problem with minimal open-quotes off-lineclose quotes calculations. The focus of this work has been in developing rules for the parameters which define the beam line transport elements. Ten global parameters, the particle mass and charge, beam energy, etc., are used to provide open-quotes expertclose quotes estimates of lower and upper limits for each of the transport element parameters. For example, the limits for the field strength of the quadrupole element are based on a water-cooled, iron-core electromagnet with dimensions derived from practical engineering constraints, and the upper limit for the effective length is scaled with the particle momenta so that initially parallel trajectories do not cross the axis inside the magnet. Limits for the quadrupole doublet and triplet parameters incorporate these rules and additional rules based on stable FODO lattices and bidirectional focusing requirements. The structure of the rule base is outlined and examples for the quadrupole singlet, doublet and triplet are described. The rule base has been implemented within the Shell for Particle Accelerator Related Codes (SPARC) graphical user interface (GUI)

Ideas of holistic engineering meet engineering work practices

DEFF Research Database (Denmark)

Buch, Anders

2016-01-01

This article critically reflects on the viability of the idea that reforming engineering education will result in more holistic engineering work practices. Drawing on an empirical study, the article aims to demonstrate that in order to change existing engineering work practices, it might...... be necessary to change engineers’ knowledge and skills; however, such changes are far from sufficient. Conditions and circumstances external to practitioners’ knowledge and skills are crucial if engineering work is to become more holistic. To illustrate this point, the article outlines an empirical study...... of a small team of professionals who engage in holistic engineering work practices in an engineering consultancy company. The work practices are investigated using a philosophical empirical method that inquires into the doings, sayings, and relatings of the practitioners. The study describes the practice...

Revisions to the Clean Water Act Regulatory Definition of Discharge of Dredged Material; Final Rule

Science.gov (United States)

The U.S. Army Corps of Engineers (Corps) and the Environmental Protection Agency (EPA) promulgated a final rule Amending a Clean Water Act (CWA) section 404 regulation that defines the term discharge of dredged material.

Black Lung Benefits Act: standards for chest radiographs. Final rule.

Science.gov (United States)

2014-04-17

Physicians and adjudicators use chest radiographs (X-rays) as a tool in evaluating whether a coal miner suffers from pneumoconiosis (black lung disease). Accordingly, the Department's regulations implementing the Black Lung Benefits Act allow the submission of radiographs in connection with benefit claims and set out quality standards for administering and interpreting film-based chest radiographs. This final rule updates the Department's existing film-radiograph standards and provides parallel standards for digital radiographs. This rule also updates outdated terminology and removes certain obsolete provisions.

Selection rule for Dirac-like points in two-dimensional dielectric photonic crystals

KAUST Repository

Li, Yan

2013-01-01

We developed a selection rule for Dirac-like points in two-dimensional dielectric photonic crystals. The rule is derived from a perturbation theory and states that a non-zero, mode-coupling integral between the degenerate Bloch states guarantees a Dirac-like point, regardless of the type of the degeneracy. In fact, the selection rule can also be determined from the symmetry of the Bloch states even without computing the integral. Thus, the existence of Dirac-like points can be quickly and conclusively predicted for various photonic crystals independent of wave polarization, lattice structure, and composition. © 2013 Optical Society of America.

Penerapan Teknik Seo (Search Engine Optimization pada Website dalam Strategi Pemasaran melalui Internet

Directory of Open Access Journals (Sweden)

Rony Baskoro Lukito

2014-12-01

Full Text Available The purpose of this research is how to optimize a web design that can increase the number of visitors. The number of Internet users in the world continues to grow in line with advances in information technology. Products and services marketing media do not just use the printed and electronic media. Moreover, the cost of using the Internet as a medium of marketing is relatively inexpensive when compared to the use of television as a marketing medium. The penetration of the internet as a marketing medium lasted for 24 hours in different parts of the world. But to make an internet site into a site that is visited by many internet users, the site is not only good from the outside view only. Web sites that serve as a medium for marketing must be built with the correct rules, so that the Web site be optimal marketing media. One of the good rules in building the internet site as a marketing medium is how the content of such web sites indexed well in search engines like google. Search engine optimization in the index will be focused on the search engine Google for 83% of internet users across the world using Google as a search engine. Search engine optimization commonly known as SEO (Search Engine Optimization is an important rule that the internet site is easier to find a user with the desired keywords.

Thermal Expansion Behavior of Hot-Pressed Engineered Matrices

Science.gov (United States)

Raj, S. V.

2016-01-01

Advanced engineered matrix composites (EMCs) require that the coefficient of thermal expansion (CTE) of the engineered matrix (EM) matches those of the fiber reinforcements as closely as possible in order to reduce thermal compatibility strains during heating and cooling of the composites. The present paper proposes a general concept for designing suitable matrices for long fiber reinforced composites using a rule of mixtures (ROM) approach to minimize the global differences in the thermal expansion mismatches between the fibers and the engineered matrix. Proof-of-concept studies were conducted to demonstrate the validity of the concept.

Pilot Study for Maintenance Rule at KSNP

International Nuclear Information System (INIS)

Choi, Kwang Hee; Jeong, Hyeon Jong; Jee, Moon Hak; Hong, Sung Yull

2005-01-01

Maintenance Rule (MR), which was developed to monitor the effectiveness of maintenance in a nuclear power plant (NPP), has been received as highly successful program by and large since its implementation in 1996 in the United States. Korea has initiated two pilot programs to implement the Maintenance Rule program in 2003. Selected plants for the pilot implementation are Kori 3 and 4 units and Ulchin 3 and 4 units, where Kori 3 and 4 units are Westinghouse units and Ulchin 3 and 4 units are Korean Standardized Nuclear Power (KSNP) Plant units. This paper describes the results of each key tasks completed to date and insights gained from pilot study on the KSNP units. Currently, Scoping of the functions of maintenance rule and determination of safety significance level have been completed during first year. As first task, total 607 functions were identified and defined by detailed function analysis on 135 systems that cover all plant systems. About 55% of total functions are selected as within the scope of maintenance rule. Among these inscoped functions, 56% of scoped functions are safety related and 44% are non-safety related functions. Evaluation of safety significance for each function was determined by expert panel consist of eight experts in field of plant maintenance, operation, PSA, work schedule and system engineers. As a result, about 46% of functions were determined to be high safety significant functions and rest of the functions were classified as low safety significant. The remaining tasks that are included determination of performance criteria and preparation of implementing guideline will be performed in following years

Setting new global rules? : TNCs and codes of conduct

NARCIS (Netherlands)

Kolk, A.; van Tulder, R.

2005-01-01

The introduction of codes of conduct can be seen as an expression of corporate social responsibility, but also as rule-setting behaviour - attempts to help fill some of the existing international instutitional voids. To shed light on these aspects and the (potential) effectiveness of codes, this

Tissue engineering

CERN Document Server

Fisher, John P; Bronzino, Joseph D

2007-01-01

Increasingly viewed as the future of medicine, the field of tissue engineering is still in its infancy. As evidenced in both the scientific and popular press, there exists considerable excitement surrounding the strategy of regenerative medicine. To achieve its highest potential, a series of technological advances must be made. Putting the numerous breakthroughs made in this field into a broad context, Tissue Engineering disseminates current thinking on the development of engineered tissues. Divided into three sections, the book covers the fundamentals of tissue engineering, enabling technologies, and tissue engineering applications. It examines the properties of stem cells, primary cells, growth factors, and extracellular matrix as well as their impact on the development of tissue engineered devices. Contributions focus on those strategies typically incorporated into tissue engineered devices or utilized in their development, including scaffolds, nanocomposites, bioreactors, drug delivery systems, and gene t...

HOW ECOLOGICAL COMMUNITIES ARE STRUCTURED: A REVIEW ON ECOLOGICAL ASSEMBLY RULES

Directory of Open Access Journals (Sweden)

Gabriel Jaime Colorado Zuluaga

Full Text Available Whether biological communities are deterministic or stochastic assemblages of species has long been a central topic of ecology. The widely demonstrated presence of structural patterns in nature may imply the existence of rules that regulate the organization of ecological communities. In this review, I present a compilation of major assembly rules that fundament, in a great proportion, the community assembly theory. Initially, I present a general overview of key concepts associated to the assembly of communities, in particular the origin of assembly rules, definition, the problem of scale and underlying mechanisms in the structure of ecological communities. Subsequently, two major approaches or paradigms (i.e. species-based and trait-based for the assembly of communities are discussed. Finally, major tested assembly rules are explored and discussed under the light of available published literature.

Rules and routines in organizations and the management of safety rules

Energy Technology Data Exchange (ETDEWEB)

Weichbrodt, J. Ch.

2013-07-01

This thesis is concerned with the relationship between rules and routines in organizations and how the former can be used to steer the latter. Rules are understood as formal organizational artifacts, whereas organizational routines are collective patterns of action. While research on routines has been thriving, a clear understanding of how rules can be used to influence or control organizational routines (and vice-versa) is still lacking. This question is of particular relevance to safety rules in high-risk organizations, where the way in which organizational routines unfold can ultimately be a matter of life and death. In these organizations, an important and related issue is the balancing of standardization and flexibility – which, in the case of rules, takes the form of finding the right degree of formalization. In high-risk organizations, the question is how to adequately regulate actors’ routines in order to facilitate safe behavior, while at the same time leaving enough leeway for actors to make good decisions in abnormal situations. The railroads are regarded as high-risk industries and also rely heavily on formal rules. In this thesis, the Swiss Federal Railways (SBB) were therefore selected for a field study on rules and routines. The issues outlined so far are being tackled theoretically (paper 1), empirically (paper 2), and from a practitioner’s (i.e., rule maker’s) point of view (paper 3). In paper 1, the relationship between rules and routines is theoretically conceptualized, based on a literature review. Literature on organizational control and coordination, on rules in human factors and safety, and on organizational routines is combined. Three distinct roles (rule maker, rule supervisor, and rule follower) are outlined. Six propositions are developed regarding the necessary characteristics of both routines and rules, the respective influence of the three roles on the rule-routine relationship, and regarding organizational aspects such as

Rules and routines in organizations and the management of safety rules

International Nuclear Information System (INIS)

Weichbrodt, J. Ch.

2013-01-01

This thesis is concerned with the relationship between rules and routines in organizations and how the former can be used to steer the latter. Rules are understood as formal organizational artifacts, whereas organizational routines are collective patterns of action. While research on routines has been thriving, a clear understanding of how rules can be used to influence or control organizational routines (and vice-versa) is still lacking. This question is of particular relevance to safety rules in high-risk organizations, where the way in which organizational routines unfold can ultimately be a matter of life and death. In these organizations, an important and related issue is the balancing of standardization and flexibility – which, in the case of rules, takes the form of finding the right degree of formalization. In high-risk organizations, the question is how to adequately regulate actors’ routines in order to facilitate safe behavior, while at the same time leaving enough leeway for actors to make good decisions in abnormal situations. The railroads are regarded as high-risk industries and also rely heavily on formal rules. In this thesis, the Swiss Federal Railways (SBB) were therefore selected for a field study on rules and routines. The issues outlined so far are being tackled theoretically (paper 1), empirically (paper 2), and from a practitioner’s (i.e., rule maker’s) point of view (paper 3). In paper 1, the relationship between rules and routines is theoretically conceptualized, based on a literature review. Literature on organizational control and coordination, on rules in human factors and safety, and on organizational routines is combined. Three distinct roles (rule maker, rule supervisor, and rule follower) are outlined. Six propositions are developed regarding the necessary characteristics of both routines and rules, the respective influence of the three roles on the rule-routine relationship, and regarding organizational aspects such as

The Development of a Graphical User Interface Engine for the Convenient Use of the HL7 Version 2.x Interface Engine.

Science.gov (United States)

Kim, Hwa Sun; Cho, Hune; Lee, In Keun

2011-12-01

The Health Level Seven Interface Engine (HL7 IE), developed by Kyungpook National University, has been employed in health information systems, however users without a background in programming have reported difficulties in using it. Therefore, we developed a graphical user interface (GUI) engine to make the use of the HL7 IE more convenient. The GUI engine was directly connected with the HL7 IE to handle the HL7 version 2.x messages. Furthermore, the information exchange rules (called the mapping data), represented by a conceptual graph in the GUI engine, were transformed into program objects that were made available to the HL7 IE; the mapping data were stored as binary files for reuse. The usefulness of the GUI engine was examined through information exchange tests between an HL7 version 2.x message and a health information database system. Users could easily create HL7 version 2.x messages by creating a conceptual graph through the GUI engine without requiring assistance from programmers. In addition, time could be saved when creating new information exchange rules by reusing the stored mapping data. The GUI engine was not able to incorporate information types (e.g., extensible markup language, XML) other than the HL7 version 2.x messages and the database, because it was designed exclusively for the HL7 IE protocol. However, in future work, by including additional parsers to manage XML-based information such as Continuity of Care Documents (CCD) and Continuity of Care Records (CCR), we plan to ensure that the GUI engine will be more widely accessible for the health field.

Flow Visualization of a Rotating Detonation Engine

Science.gov (United States)

2016-10-05

SUPPLEMENTARY NOTES 14. ABSTRACT The rotating detonation engine ( RDE ) is a propulsion system that obtains thrust using continuously existing...2014 – 12/4/2015 Summary: The rotating detonation engine ( RDE ) is a propulsion system that obtains thrust using continuously existing detonation...structure. Studies have been conducted on rotating detonation engines ( RDE ) that obtain thrust from the continuously propagating detonation waves in the

Engineering Application Way of Faults Knowledge Discovery Based on Rough Set Theory

International Nuclear Information System (INIS)

Zhao Rongzhen; Deng Linfeng; Li Chao

2011-01-01

For the knowledge acquisition puzzle of intelligence decision-making technology in mechanical industry, to use the Rough Set Theory (RST) as a kind of tool to solve the puzzle was researched. And the way to realize the knowledge discovery in engineering application is explored. A case extracting out the knowledge rules from a concise data table shows out some important information. It is that the knowledge discovery similar to the mechanical faults diagnosis is an item of complicated system engineering project. In where, first of all-important tasks is to preserve the faults knowledge into a table with data mode. And the data must be derived from the plant site and should also be as concise as possible. On the basis of the faults knowledge data obtained so, the methods and algorithms to process the data and extract the knowledge rules from them by means of RST can be processed only. The conclusion is that the faults knowledge discovery by the way is a process of rising upward. But to develop the advanced faults diagnosis technology by the way is a large-scale knowledge engineering project for long time. Every step in which should be designed seriously according to the tool's demands firstly. This is the basic guarantees to make the knowledge rules obtained have the values of engineering application and the studies have scientific significance. So, a general framework is designed for engineering application to go along the route developing the faults knowledge discovery technology.

78 FR 53380 - Value Engineering

Science.gov (United States)

2013-08-29

...-2013-0039] RIN 2125-AF64 Value Engineering AGENCY: Federal Highway Administration (FHWA), U.S.... SUMMARY: The FHWA proposes to update the existing value engineering (VE) regulations to make the... provided. FOR FURTHER INFORMATION CONTACT: Mr. Ken Leuderalbert, Value Engineering and Utilities Program...

Reflections on Software Engineering Education

NARCIS (Netherlands)

van Vliet, H.

2006-01-01

In recent years, the software engineering community has focused on organizing its existing knowledge and finding opportunities to transform that knowledge into a university curriculum. SWEBOK (the Guide to the Software Engineering Body of Knowledge) and Software Engineering 2004 are two initiatives

Logic Learning Machine creates explicit and stable rules stratifying neuroblastoma patients.

Science.gov (United States)

Cangelosi, Davide; Blengio, Fabiola; Versteeg, Rogier; Eggert, Angelika; Garaventa, Alberto; Gambini, Claudio; Conte, Massimo; Eva, Alessandra; Muselli, Marco; Varesio, Luigi

2013-01-01

Neuroblastoma is the most common pediatric solid tumor. About fifty percent of high risk patients die despite treatment making the exploration of new and more effective strategies for improving stratification mandatory. Hypoxia is a condition of low oxygen tension occurring in poorly vascularized areas of the tumor associated with poor prognosis. We had previously defined a robust gene expression signature measuring the hypoxic component of neuroblastoma tumors (NB-hypo) which is a molecular risk factor. We wanted to develop a prognostic classifier of neuroblastoma patients' outcome blending existing knowledge on clinical and molecular risk factors with the prognostic NB-hypo signature. Furthermore, we were interested in classifiers outputting explicit rules that could be easily translated into the clinical setting. Shadow Clustering (SC) technique, which leads to final models called Logic Learning Machine (LLM), exhibits a good accuracy and promises to fulfill the aims of the work. We utilized this algorithm to classify NB-patients on the bases of the following risk factors: Age at diagnosis, INSS stage, MYCN amplification and NB-hypo. The algorithm generated explicit classification rules in good agreement with existing clinical knowledge. Through an iterative procedure we identified and removed from the dataset those examples which caused instability in the rules. This workflow generated a stable classifier very accurate in predicting good and poor outcome patients. The good performance of the classifier was validated in an independent dataset. NB-hypo was an important component of the rules with a strength similar to that of tumor staging. The novelty of our work is to identify stability, explicit rules and blending of molecular and clinical risk factors as the key features to generate classification rules for NB patients to be conveyed to the clinic and to be used to design new therapies. We derived, through LLM, a set of four stable rules identifying a new

Logic Learning Machine creates explicit and stable rules stratifying neuroblastoma patients

Science.gov (United States)

2013-01-01

Background Neuroblastoma is the most common pediatric solid tumor. About fifty percent of high risk patients die despite treatment making the exploration of new and more effective strategies for improving stratification mandatory. Hypoxia is a condition of low oxygen tension occurring in poorly vascularized areas of the tumor associated with poor prognosis. We had previously defined a robust gene expression signature measuring the hypoxic component of neuroblastoma tumors (NB-hypo) which is a molecular risk factor. We wanted to develop a prognostic classifier of neuroblastoma patients' outcome blending existing knowledge on clinical and molecular risk factors with the prognostic NB-hypo signature. Furthermore, we were interested in classifiers outputting explicit rules that could be easily translated into the clinical setting. Results Shadow Clustering (SC) technique, which leads to final models called Logic Learning Machine (LLM), exhibits a good accuracy and promises to fulfill the aims of the work. We utilized this algorithm to classify NB-patients on the bases of the following risk factors: Age at diagnosis, INSS stage, MYCN amplification and NB-hypo. The algorithm generated explicit classification rules in good agreement with existing clinical knowledge. Through an iterative procedure we identified and removed from the dataset those examples which caused instability in the rules. This workflow generated a stable classifier very accurate in predicting good and poor outcome patients. The good performance of the classifier was validated in an independent dataset. NB-hypo was an important component of the rules with a strength similar to that of tumor staging. Conclusions The novelty of our work is to identify stability, explicit rules and blending of molecular and clinical risk factors as the key features to generate classification rules for NB patients to be conveyed to the clinic and to be used to design new therapies. We derived, through LLM, a set of four

Using GO-WAR for mining cross-ontology weighted association rules.

Science.gov (United States)

Agapito, Giuseppe; Cannataro, Mario; Guzzi, Pietro Hiram; Milano, Marianna

2015-07-01

The Gene Ontology (GO) is a structured repository of concepts (GO terms) that are associated to one or more gene products. The process of association is referred to as annotation. The relevance and the specificity of both GO terms and annotations are evaluated by a measure defined as information content (IC). The analysis of annotated data is thus an important challenge for bioinformatics. There exist different approaches of analysis. From those, the use of association rules (AR) may provide useful knowledge, and it has been used in some applications, e.g. improving the quality of annotations. Nevertheless classical association rules algorithms do not take into account the source of annotation nor the importance yielding to the generation of candidate rules with low IC. This paper presents GO-WAR (Gene Ontology-based Weighted Association Rules) a methodology for extracting weighted association rules. GO-WAR can extract association rules with a high level of IC without loss of support and confidence from a dataset of annotated data. A case study on using of GO-WAR on publicly available GO annotation datasets is used to demonstrate that our method outperforms current state of the art approaches. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Exploration of SWRL Rule Bases through Visualization, Paraphrasing, and Categorization of Rules

Science.gov (United States)

Hassanpour, Saeed; O'Connor, Martin J.; Das, Amar K.

Rule bases are increasingly being used as repositories of knowledge content on the Semantic Web. As the size and complexity of these rule bases increases, developers and end users need methods of rule abstraction to facilitate rule management. In this paper, we describe a rule abstraction method for Semantic Web Rule Language (SWRL) rules that is based on lexical analysis and a set of heuristics. Our method results in a tree data structure that we exploit in creating techniques to visualize, paraphrase, and categorize SWRL rules. We evaluate our approach by applying it to several biomedical ontologies that contain SWRL rules, and show how the results reveal rule patterns within the rule base. We have implemented our method as a plug-in tool for Protégé-OWL, the most widely used ontology modeling software for the Semantic Web. Our tool can allow users to rapidly explore content and patterns in SWRL rule bases, enabling their acquisition and management.

49 CFR 26.65 - What rules govern business size determinations?

Science.gov (United States)

2010-10-01

... (including its affiliates) must be an existing small business, as defined by Small Business Administration... 49 Transportation 1 2010-10-01 2010-10-01 false What rules govern business size determinations? 26... DISADVANTAGED BUSINESS ENTERPRISES IN DEPARTMENT OF TRANSPORTATION FINANCIAL ASSISTANCE PROGRAMS Certification...

Australian road rules

Science.gov (United States)

2009-02-01

*These are national-level rules. Australian Road Rules - 2009 Version, Part 18, Division 1, Rule 300 "Use of Mobile Phones" describes restrictions of mobile phone use while driving. The rule basically states that drivers cannot make or receive calls ...

Decision rules and group rationality: cognitive gain or standstill?

Directory of Open Access Journals (Sweden)

Petru Lucian Curşeu

Full Text Available Recent research in group cognition points towards the existence of collective cognitive competencies that transcend individual group members' cognitive competencies. Since rationality is a key cognitive competence for group decision making, and group cognition emerges from the coordination of individual cognition during social interactions, this study tests the extent to which collaborative and consultative decision rules impact the emergence of group rationality. Using a set of decision tasks adapted from the heuristics and biases literature, we evaluate rationality as the extent to which individual choices are aligned with a normative ideal. We further operationalize group rationality as cognitive synergy (the extent to which collective rationality exceeds average or best individual rationality in the group, and we test the effect of collaborative and consultative decision rules in a sample of 176 groups. Our results show that the collaborative decision rule has superior synergic effects as compared to the consultative decision rule. The ninety one groups working in a collaborative fashion made more rational choices (above and beyond the average rationality of their members than the eighty five groups working in a consultative fashion. Moreover, the groups using a collaborative decision rule were closer to the rationality of their best member than groups using consultative decision rules. Nevertheless, on average groups did not outperformed their best member. Therefore, our results reveal how decision rules prescribing interpersonal interactions impact on the emergence of collective cognitive competencies. They also open potential venues for further research on the emergence of collective rationality in human decision-making groups.

Decision rules and group rationality: cognitive gain or standstill?

Science.gov (United States)

Curşeu, Petru Lucian; Jansen, Rob J G; Chappin, Maryse M H

2013-01-01

Recent research in group cognition points towards the existence of collective cognitive competencies that transcend individual group members' cognitive competencies. Since rationality is a key cognitive competence for group decision making, and group cognition emerges from the coordination of individual cognition during social interactions, this study tests the extent to which collaborative and consultative decision rules impact the emergence of group rationality. Using a set of decision tasks adapted from the heuristics and biases literature, we evaluate rationality as the extent to which individual choices are aligned with a normative ideal. We further operationalize group rationality as cognitive synergy (the extent to which collective rationality exceeds average or best individual rationality in the group), and we test the effect of collaborative and consultative decision rules in a sample of 176 groups. Our results show that the collaborative decision rule has superior synergic effects as compared to the consultative decision rule. The ninety one groups working in a collaborative fashion made more rational choices (above and beyond the average rationality of their members) than the eighty five groups working in a consultative fashion. Moreover, the groups using a collaborative decision rule were closer to the rationality of their best member than groups using consultative decision rules. Nevertheless, on average groups did not outperformed their best member. Therefore, our results reveal how decision rules prescribing interpersonal interactions impact on the emergence of collective cognitive competencies. They also open potential venues for further research on the emergence of collective rationality in human decision-making groups.

Rule Versus the Causality Rule in Insurance Law

DEFF Research Database (Denmark)

Lando, Henrik

When the Buyer of insurance has negligently kept silent or misrepresented a (material) fact to the Seller, one of two rules will determine the extent to which cover will consequently be reduced. The pro-rata rule lowers cover in proportion to how much the Seller would have increased the premium had...... he been correctly informed; the causality rule provides either zero cover if the omitted fact has caused the insurance event, or full cover if the event would have occurred regardless of the fact. This article explores which rule is more efficient. Using the framework proposed by Picard and Dixit...... it subjects the risk averse Buyer of insurance to less variance. This implies that the pro rata rule should apply when there is significant risk for a Buyer of unintentional misrepresentation, and when the incentive to intentionally misrepresent can be curtailed through frequent verification of the Buyer...

Automated implementation of rule-based expert systems with neural networks for time-critical applications

Science.gov (United States)

Ramamoorthy, P. A.; Huang, Song; Govind, Girish

1991-01-01

In fault diagnosis, control and real-time monitoring, both timing and accuracy are critical for operators or machines to reach proper solutions or appropriate actions. Expert systems are becoming more popular in the manufacturing community for dealing with such problems. In recent years, neural networks have revived and their applications have spread to many areas of science and engineering. A method of using neural networks to implement rule-based expert systems for time-critical applications is discussed here. This method can convert a given rule-based system into a neural network with fixed weights and thresholds. The rules governing the translation are presented along with some examples. We also present the results of automated machine implementation of such networks from the given rule-base. This significantly simplifies the translation process to neural network expert systems from conventional rule-based systems. Results comparing the performance of the proposed approach based on neural networks vs. the classical approach are given. The possibility of very large scale integration (VLSI) realization of such neural network expert systems is also discussed.

The design value method and adjusted partial factor approach for existing structures

NARCIS (Netherlands)

Caspeele, R.; Sykora, M.; Allaix, D.L.; Steenbergen, R.D.J.M.

2013-01-01

In contrast to the design of new structures, the assessment of existing structures often relies on the subjective judgement of the investigating engineer. An objective verification format for existing structures based on alternative partial factors is however feasible, enabling a rather simple and

Cost of enlarged operating zone for an existing Francis runner

Science.gov (United States)

Monette, Christine; Marmont, Hugues; Chamberland-Lauzon, Joël; Skagerstrand, Anders; Coutu, André; Carlevi, Jens

2016-11-01

Traditionally, hydro power plants have been operated close to best efficiency point, the more stable operating condition for which they have been designed. However, because of changes in the electricity market, many hydro power plants operators wish to operate their machines differently to fulfil those new market needs. New operating conditions can include whole range operation, many start/stops, extensive low load operation, synchronous condenser mode and power/frequency regulation. Many of these new operating conditions may impose more severe fatigue damage than the traditional base load operation close to best efficiency point. Under these conditions, the fatigue life of the runner may be significantly reduced and reparation or replacement cost might occur sooner than expected. In order to design reliable Francis runners for those new challenging operating scenarios, Andritz Hydro has developed various proprietary tools and design rules. These are used within Andritz Hydro to design mechanically robust Francis runners for the operating scenarios fulfilling customer's specifications. To estimate residual life under different operating scenarios of an existing runner designed years ago for best efficiency base load operation, Andritz Hydro's design rules and tools would necessarily lead to conservative results. While the geometry of a new runner can be modified to fulfil all conservative mechanical design rules, the predicted fatigue life of an existing runner under off-design operating conditions may appear rather short because of the conservative safety factor included in the calculations. The most precise and reliable way to calculate residual life of an existing runner under different operating scenarios is to perform a strain gauge measurement campaign on the runner. This paper presents the runner strain gage measurement campaign of a mid-head Francis turbine over all the operating conditions available during the test, the analysis of the measurement signals

Electromagnetic compatibility design and cabling system rules; Regles de conception et de cablage des systemes electroniques

Energy Technology Data Exchange (ETDEWEB)

Raimbourg, J.

2009-07-01

This report is devoted to establish EMC (Electromagnetic Compatibility) design and cabling system rules. It is intended for hardware designers in charge of designing electronic maps or integrating existing materials into a comprehensive system. It is a practical guide. The rules described in this document do not require enhanced knowledge of advanced mathematical or physical concepts. The key point is to understand phenomena with a pragmatic approach to highlight the design and protection rules. (author)

Context-Based Tourism Information Filtering with a Semantic Rule Engine

Science.gov (United States)

Lamsfus, Carlos; Martin, David; Alzua-Sorzabal, Aurkene; López-de-Ipiña, Diego; Torres-Manzanera, Emilio

2012-01-01

This paper presents the CONCERT framework, a push/filter information consumption paradigm, based on a rule-based semantic contextual information system for tourism. CONCERT suggests a specific insight of the notion of context from a human mobility perspective. It focuses on the particular characteristics and requirements of travellers and addresses the drawbacks found in other approaches. Additionally, CONCERT suggests the use of digital broadcasting as push communication technology, whereby tourism information is disseminated to mobile devices. This information is then automatically filtered by a network of ontologies and offered to tourists on the screen. The results obtained in the experiments carried out show evidence that the information disseminated through digital broadcasting can be manipulated by the network of ontologies, providing contextualized information that produces user satisfaction. PMID:22778584

Proposal of criteria for evaluation of engineering safety factors of VVER core parameters

International Nuclear Information System (INIS)

Shishkov, L.; Tsyganov, S.; Dementiev, V.

2009-01-01

The paper states that the regulatory documentation, as a rule, do not give explicit recommendations on formation techniques of engineering safety factors for design limited parameters of normal operation (K eng ). The AER countries use different approaches to K eng evaluation (sometimes even one country in relation of various power units). The paper suggests the development of uniform rules to be used in calculation of engineering safety factor for all VVER reactors. The paper presents principal problems that must be solved in the course of the discussion, and in the form of an exercise suggests the way of their solution. (authors)

Proposal of criteria for evaluation of engineering safety factors of WWER core parameters

International Nuclear Information System (INIS)

Shishkov, L.; Tsyganov, S.; Dementiev, V.

2009-01-01

The paper states that the regulatory documentation, as a rule, do not give explicit recommendations on formation techniques of engineering safety factors for design limited parameters of normal operation. The AER countries use different approaches to evaluation (sometimes even one country in relation of various power units). The paper suggests the development of uniform rules to be used in calculation of engineering safety factor for all WWER reactors. The paper presents principal problems that must be solved in the course of the discussion, and in the form of an exercise suggests the way of their solution. (Authors)

French en engineering and operation rules for plutonium facilities

International Nuclear Information System (INIS)

Bertolotti, G.; Drain, F.; Dubois, G.; Monnatte, J.; Mathieu, P.

1998-01-01

COGEMA is operating large size purifying and conditioning plutonium facilities at LA HAGUE and MOX fuels fabrication plant at Marcoule. A high safety standard is recognised for these facilities. It is mainly based on : - prevention of spreading of radioactive materials to workers and environment by physical barriers ensuring static containment and by a cascade of pressure differentials ensuring dynamic containment, - radiation shielding and remote controlled processes ensuring very low dose to workers, - prevention of criticality accident by criticality control methods and double contingency principle, - prevention of fire risks by control of ignition sources, adequate management of combustible materials, physical separation between zones where there is a risk of fire and the remainder of the facility. The facilities are operated while respecting safety requirements as described in the General Operating Rules. The equipment involved in safety functions are monitored and periodically checked. Continuous improvement by incorporation of feed back of safety experience results in: - effective decrease of exposure to operating staff; - reduction of solid waste, liquid and gaseous effluents; - no significant incident recorded. (author)

Shedding Light on Engineering Design

Science.gov (United States)

Capobianco, Brenda M.; Nyquist, Chell; Tyrie, Nancy

2013-01-01

This article describes the steps incorporated to teach an engineering design process in a fifth-grade science classroom. The engineering design-based activity was an existing scientific inquiry activity using UV light--detecting beads and purposefully creating a series of engineering design-based challenges around the investigation. The…

Low energy house in existing buildings; Niedrigenergiehaus im Bestand

Energy Technology Data Exchange (ETDEWEB)

Sahner, G. [BDA, Stuttgart/Augsburg (Germany)

2008-07-01

Presented is an energetic sanitation of residential units in the frame of a German pilot program (''low energy houses in the existing building sector'') initiated by the ministry of traffic, civil engineering and city development. (GL)

Counter-ions at single charged wall: Sum rules.

Science.gov (United States)

Samaj, Ladislav

2013-09-01

For inhomogeneous classical Coulomb fluids in thermal equilibrium, like the jellium or the two-component Coulomb gas, there exists a variety of exact sum rules which relate the particle one-body and two-body densities. The necessary condition for these sum rules is that the Coulomb fluid possesses good screening properties, i.e. the particle correlation functions or the averaged charge inhomogeneity, say close to a wall, exhibit a short-range (usually exponential) decay. In this work, we study equilibrium statistical mechanics of an electric double layer with counter-ions only, i.e. a globally neutral system of equally charged point-like particles in the vicinity of a plain hard wall carrying a fixed uniform surface charge density of opposite sign. At large distances from the wall, the one-body and two-body counter-ion densities go to zero slowly according to the inverse-power law. In spite of the absence of screening, all known sum rules are shown to hold for two exactly solvable cases of the present system: in the weak-coupling Poisson-Boltzmann limit (in any spatial dimension larger than one) and at a special free-fermion coupling constant in two dimensions. This fact indicates an extended validity of the sum rules and provides a consistency check for reasonable theoretical approaches.

Discrepant feeling rules and unscripted emotion work: women coping with termination for fetal anomaly.

Science.gov (United States)

McCoyd, Judith L M

2009-10-01

The sociology of emotion is rapidly evolving and has implications for medical settings. Advancing medical technologies create new contexts for decision-making and emotional reaction that are framed by "feeling rules." Feeling rules guide not only behavior, but also how one believes one should feel, thereby causing one to attempt to bring one's authentic feelings into line with perceived feeling rules. Using qualitative data, the theoretical existence of feeling rules in pregnancy and prenatal testing is confirmed. Further examination extends this analysis: at times of technological development feeling rules are often discrepant, leaving patients with unscripted emotion work. Data from a study of women who interrupted anomalous pregnancies indicate that feeling rules are unclear when competing feeling rules are operating during times of societal and technological change. Because much of this occurs below the level of consciousness, medical and psychological services providers need to be aware of potential discrepancies in feeling rules and assist patients in identifying the salient feeling rules. Patients' struggles ease when they can recognize the discrepancies and assess their implications for decision-making and emotional response. (c) 2009 APA, all rights reserved.

Decision support system for triage management: A hybrid approach using rule-based reasoning and fuzzy logic.

Science.gov (United States)

Dehghani Soufi, Mahsa; Samad-Soltani, Taha; Shams Vahdati, Samad; Rezaei-Hachesu, Peyman

2018-06-01

Fast and accurate patient triage for the response process is a critical first step in emergency situations. This process is often performed using a paper-based mode, which intensifies workload and difficulty, wastes time, and is at risk of human errors. This study aims to design and evaluate a decision support system (DSS) to determine the triage level. A combination of the Rule-Based Reasoning (RBR) and Fuzzy Logic Classifier (FLC) approaches were used to predict the triage level of patients according to the triage specialist's opinions and Emergency Severity Index (ESI) guidelines. RBR was applied for modeling the first to fourth decision points of the ESI algorithm. The data relating to vital signs were used as input variables and modeled using fuzzy logic. Narrative knowledge was converted to If-Then rules using XML. The extracted rules were then used to create the rule-based engine and predict the triage levels. Fourteen RBR and 27 fuzzy rules were extracted and used in the rule-based engine. The performance of the system was evaluated using three methods with real triage data. The accuracy of the clinical decision support systems (CDSSs; in the test data) was 99.44%. The evaluation of the error rate revealed that, when using the traditional method, 13.4% of the patients were miss-triaged, which is statically significant. The completeness of the documentation also improved from 76.72% to 98.5%. Designed system was effective in determining the triage level of patients and it proved helpful for nurses as they made decisions, generated nursing diagnoses based on triage guidelines. The hybrid approach can reduce triage misdiagnosis in a highly accurate manner and improve the triage outcomes. Copyright © 2018 Elsevier B.V. All rights reserved.

Delayed rule following

OpenAIRE

Schmitt, David R.

2001-01-01

Although the elements of a fully stated rule (discriminative stimulus [SD], some behavior, and a consequence) can occur nearly contemporaneously with the statement of the rule, there is often a delay between the rule statement and the SD. The effects of this delay on rule following have not been studied in behavior analysis, but they have been investigated in rule-like settings in the areas of prospective memory (remembering to do something in the future) and goal pursuit. Discriminative even...

Integration of object-oriented knowledge representation with the CLIPS rule based system

Science.gov (United States)

Logie, David S.; Kamil, Hasan

1990-01-01

The paper describes a portion of the work aimed at developing an integrated, knowledge based environment for the development of engineering-oriented applications. An Object Representation Language (ORL) was implemented in C++ which is used to build and modify an object-oriented knowledge base. The ORL was designed in such a way so as to be easily integrated with other representation schemes that could effectively reason with the object base. Specifically, the integration of the ORL with the rule based system C Language Production Systems (CLIPS), developed at the NASA Johnson Space Center, will be discussed. The object-oriented knowledge representation provides a natural means of representing problem data as a collection of related objects. Objects are comprised of descriptive properties and interrelationships. The object-oriented model promotes efficient handling of the problem data by allowing knowledge to be encapsulated in objects. Data is inherited through an object network via the relationship links. Together, the two schemes complement each other in that the object-oriented approach efficiently handles problem data while the rule based knowledge is used to simulate the reasoning process. Alone, the object based knowledge is little more than an object-oriented data storage scheme; however, the CLIPS inference engine adds the mechanism to directly and automatically reason with that knowledge. In this hybrid scheme, the expert system dynamically queries for data and can modify the object base with complete access to all the functionality of the ORL from rules.

Search engines and the production of academic knowledge

OpenAIRE

van Dijck, J.

2010-01-01

This article argues that search engines in general, and Google Scholar in particular, have become significant co-producers of academic knowledge. Knowledge is not simply conveyed to users, but is co-produced by search engines’ ranking systems and profiling systems, none of which are open to the rules of transparency, relevance and privacy in a manner known from library scholarship in the public domain. Inexperienced users tend to trust proprietary engines as neutral mediators of knowledge and...

A comparison between Engin and Engin-X, a new diffractometer optimized for stress measurement

International Nuclear Information System (INIS)

Dann, J.A.; Daymond, M.R.; Edwards, L.; James, J.A.; Santisteban, J.R.

2004-01-01

Engineering diffractometers are used extensively by both engineers and materials scientists for the measurement of strain within polycrystalline materials, both metallic and ceramic. In the past neutron diffractometers have generally been built as 'all-purpose' instruments, with designs that are compromises, balancing competing requirements to measure the intensities, positions and widths of diffraction peaks simultaneously. In contrast the newly constructed diffractometer ENGIN-X was designed with the single aim of making engineering strain measurements; essentially the accurate measurement of polycrystalline lattice parameters, at a precisely determined position. Under this design philosophy, considerable performance improvements have been obtained compared to the existing instrument. This paper details the design philosophy of this instrument, including tuneable incident resolution, together with the approaches used to realise the performance required. The improved instrument performance is demonstrated here, with results obtained during the commissioning of ENGIN-X. These results include strain mapping experiments, and demonstrate the influence of resolution on required count times, and provide a direct comparison with measurements from the existing ENGIN instrument at ISIS

Update on ASME rules for spent nuclear fuel and high level radioactive material and waste storage containments

International Nuclear Information System (INIS)

Ralph S. Hill III; Foster, G.M.

2005-01-01

In 2004, a new Code Case, N-717, of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (Code) was published. The Code Case provides rules for construction of containments used for storage of spent nuclear fuel and high level radioactive material and waste. The Code Case has been incorporated into Section III of the Code as Division 3, Subsection WC, Class SC Storage Containments, and will be published in the 2005 Addenda. This paper provides an informative background and insight for these rules to provide Owners, regulators, designers, and fabricators with a more comprehensive understanding of the technical basis for these rules. (authors)

Single-particle stochastic heat engine

Science.gov (United States)

Rana, Shubhashis; Pal, P. S.; Saha, Arnab; Jayannavar, A. M.

2014-10-01

We have performed an extensive analysis of a single-particle stochastic heat engine constructed by manipulating a Brownian particle in a time-dependent harmonic potential. The cycle consists of two isothermal steps at different temperatures and two adiabatic steps similar to that of a Carnot engine. The engine shows qualitative differences in inertial and overdamped regimes. All the thermodynamic quantities, including efficiency, exhibit strong fluctuations in a time periodic steady state. The fluctuations of stochastic efficiency dominate over the mean values even in the quasistatic regime. Interestingly, our system acts as an engine provided the temperature difference between the two reservoirs is greater than a finite critical value which in turn depends on the cycle time and other system parameters. This is supported by our analytical results carried out in the quasistatic regime. Our system works more reliably as an engine for large cycle times. By studying various model systems, we observe that the operational characteristics are model dependent. Our results clearly rule out any universal relation between efficiency at maximum power and temperature of the baths. We have also verified fluctuation relations for heat engines in time periodic steady state.

Effectiveness of Existing International Nuclear Liability Regime

Energy Technology Data Exchange (ETDEWEB)

Al-Doais, Salwa; Kessel, Daivd [KEPCO International Nuclear Graduate School, Daejeon (Korea, Republic of)

2015-10-15

The first convention was the Paris Convention on Third Party Liability in the Field of Nuclear Energy (the Paris Convention) had been adopted on 29 July 1960 under the auspices of the OECD, and entered into force on 1 April 1968. In 1963,the Brussels Convention - supplementary to the Paris Convention- was adopted in to provide additional funds to compensate damage as a result of a nuclear incident where Paris Convention funds proved to be insufficient. The IAEA's first convention was the Vienna Convention on Civil Liability for Nuclear Damage (the Vienna Convention) which adopted on 21 May 1963,and entered into force in 1977. Both the Paris Convention and the Vienna Convention laid down very similar nuclear liability rules based on the same general principles. The broad principles in these conventions can be summarized as follows: 1- The no-fault liability principle (strict liability) 2- Liability is channeled exclusively to the operator of the nuclear installation (legal channeling) 3- Only courts of the state in which the nuclear accident occurs would have jurisdiction (exclusive jurisdiction) 4- Limitation of the amount of liability and the time frame for claiming damages (limited liability) 5- The operator is required to have adequate insurance or financial guarantees to the extent of its liability amount (liability must be financially secured). 6- Liability is limited in time. Compensation rights are extinguished after specific time. 7- Non-discrimination of victims on the grounds of nationality, domicile or residence. Nuclear liability conventions objective is to provide adequate compensation payments to victims of a nuclear accident. Procedures for receiving these compensation are controlled by some rules such as exclusive jurisdiction, that rule need a further amendment to ensure the effectiveness of the exiting nuclear liability regime . Membership of the Conventions is a critical issue, because the existence of the conventions without being party to

Effectiveness of Existing International Nuclear Liability Regime

International Nuclear Information System (INIS)

Al-Doais, Salwa; Kessel, Daivd

2015-01-01

The first convention was the Paris Convention on Third Party Liability in the Field of Nuclear Energy (the Paris Convention) had been adopted on 29 July 1960 under the auspices of the OECD, and entered into force on 1 April 1968. In 1963,the Brussels Convention - supplementary to the Paris Convention- was adopted in to provide additional funds to compensate damage as a result of a nuclear incident where Paris Convention funds proved to be insufficient. The IAEA's first convention was the Vienna Convention on Civil Liability for Nuclear Damage (the Vienna Convention) which adopted on 21 May 1963,and entered into force in 1977. Both the Paris Convention and the Vienna Convention laid down very similar nuclear liability rules based on the same general principles. The broad principles in these conventions can be summarized as follows: 1- The no-fault liability principle (strict liability) 2- Liability is channeled exclusively to the operator of the nuclear installation (legal channeling) 3- Only courts of the state in which the nuclear accident occurs would have jurisdiction (exclusive jurisdiction) 4- Limitation of the amount of liability and the time frame for claiming damages (limited liability) 5- The operator is required to have adequate insurance or financial guarantees to the extent of its liability amount (liability must be financially secured). 6- Liability is limited in time. Compensation rights are extinguished after specific time. 7- Non-discrimination of victims on the grounds of nationality, domicile or residence. Nuclear liability conventions objective is to provide adequate compensation payments to victims of a nuclear accident. Procedures for receiving these compensation are controlled by some rules such as exclusive jurisdiction, that rule need a further amendment to ensure the effectiveness of the exiting nuclear liability regime . Membership of the Conventions is a critical issue, because the existence of the conventions without being party to

76 FR 12923 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

Science.gov (United States)

2011-03-09

... National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines... pollutants for existing stationary spark ignition reciprocating internal combustion engines. The final rule... reciprocating internal combustion generation, engine. transmission, or distribution. 622110 Medical and surgical...

75 FR 51569 - National Emission Standards for Hazardous Air Pollutants for Reciprocating Internal Combustion...

Science.gov (United States)

2010-08-20

... Air Pollutants for Reciprocating Internal Combustion Engines; Final Rule #0;#0;Federal Register / Vol... for Hazardous Air Pollutants for Reciprocating Internal Combustion Engines AGENCY: Environmental... hazardous air pollutants for existing stationary spark ignition reciprocating internal combustion engines...

A rule-based fault detection method for air handling units

Energy Technology Data Exchange (ETDEWEB)

Schein, J.; Bushby, S. T.; Castro, N. S. [National Institute of Standards and Technology, Gaithersburg, MD (United States); House, J. M. [Iowa Energy Center, Ankeny, IA (United States)

2006-07-01

Air handling unit performance assessment rules (APAR) is a fault detection tool that uses a set of expert rules derived from mass and energy balances to detect faults in air handling units (AHUs). Control signals are used to determine the mode of operation of the AHU. A subset of the expert rules which correspond to that mode of operation are then evaluated to determine whether a fault exists. APAR is computationally simple enough that it can be embedded in commercial building automation and control systems and relies only upon the sensor data and control signals that are commonly available in these systems. APAR was tested using data sets collected from a 'hardware-in-the-loop' emulator and from several field sites. APAR was also embedded in commercial AHU controllers and tested in the emulator. (author)

International and national standardisation for quality assurance in nuclear engineering

International Nuclear Information System (INIS)

Becker, K.

1992-01-01

After a summarising description of international developments (ISO 6216, ISO 9000 series, IAEA 50 SG-QA) an overview of the total of around 200 national quality standards and regulations from almost 20 countries is given. Finally the relationships between rules of engineering and the rules of laws, mechanisms and trends in the development of nuclear energy standards with particular consideration of the possibilities for European harmonisation are presented in brief. 1 fig., 5 tabs

Protection of continued economic existence and major changes. 1. paper

International Nuclear Information System (INIS)

Backherms, J.

1980-01-01

On the issue of protecting continued economic existence according to Sect. 18 of the Atomic Energy Law, a difference is made between changes occurring in the environment of the plant, in the existing knowledge in science and technology, and changes occurring in the safety philosophy held by the authorities. In case of conditions being subsequently imposed because of a change in the existing knowledge in science and technology, the liability of the authorities to pay compensation is ruled out according to Sect. 18, para. 2 No. 3 of the Atomic Energy Law. The difference made between a change in the safety philosophy held by the authorities and a change in the existing knowledge in science and technology seems to be obvious. In the first case it is a matter of changing the legal evaluation of unchanged technological findings, in the legal evaluation, however, the licence granted has to have a lasting effect on principle. (HP) [de

77 FR 9268 - Petitions for Modification of Application of Existing Mandatory Safety Standards

Science.gov (United States)

2012-02-16

... afforded by the existing standard. Docket Number: M-2011-045-C. Petitioner: Alpha Engineering Services, Inc... inspection for corrosion and damage. (iii) Inspection of the contact points to ensure a secure connection to.... Petitioner: Alpha Engineering Services, Inc., 216 Business Street, Beckley, West Virginia 25801. Mines...

Consensus states of local majority rule in stochastic process

Energy Technology Data Exchange (ETDEWEB)

Luo, Yu-Pin [Department of Electronic Engineering, National Formosa University, Huwei, 63201, Taiwan (China); Tang, Chia-Wei; Xu, Hong-Yuan [Department of Physics, Chung-Yuan Christian University, Chungli, 32023, Taiwan (China); Wu, Jinn-Wen [Department of Applied Mathematics, Chung-Yuan Christian University, Chungli, 32023, Taiwan (China); Huang, Ming-Chang, E-mail: mchuang@cycu.edu.tw [Center for Theoretical Science and Department of Physics, Chung-Yuan Christian University, Chungli, 32023, Taiwan (China)

2015-04-03

A sufficient condition for a network system to reach a consensus state of the local majority rule is shown. The influence of interpersonal environment on the occurrence probability of consensus states for Watts–Strogatz and scale-free networks with random initial states is analyzed by numerical method. We also propose a stochastic local majority rule to study the mean first passage time from a random state to a consensus and the escape rate from a consensus state for systems in a noisy environment. Our numerical results show that there exists a window of fluctuation strengths for which the mean first passage time from a random to a consensus state reduces greatly, and the escape rate of consensus states obeys the Arrhenius equation in the window. - Highlights: • A sufficient condition for reaching a consensus. • The relation between the geometry of networks and the reachability of a consensus. • Stochastic local majority rule. • The mean first-passage time and the escape rate of consensus states.

Consensus states of local majority rule in stochastic process

International Nuclear Information System (INIS)

Luo, Yu-Pin; Tang, Chia-Wei; Xu, Hong-Yuan; Wu, Jinn-Wen; Huang, Ming-Chang

2015-01-01

A sufficient condition for a network system to reach a consensus state of the local majority rule is shown. The influence of interpersonal environment on the occurrence probability of consensus states for Watts–Strogatz and scale-free networks with random initial states is analyzed by numerical method. We also propose a stochastic local majority rule to study the mean first passage time from a random state to a consensus and the escape rate from a consensus state for systems in a noisy environment. Our numerical results show that there exists a window of fluctuation strengths for which the mean first passage time from a random to a consensus state reduces greatly, and the escape rate of consensus states obeys the Arrhenius equation in the window. - Highlights: • A sufficient condition for reaching a consensus. • The relation between the geometry of networks and the reachability of a consensus. • Stochastic local majority rule. • The mean first-passage time and the escape rate of consensus states

Symbol manipulation and rule learning in spiking neuronal networks.

Science.gov (United States)

Fernando, Chrisantha

2011-04-21

It has been claimed that the productivity, systematicity and compositionality of human language and thought necessitate the existence of a physical symbol system (PSS) in the brain. Recent discoveries about temporal coding suggest a novel type of neuronal implementation of a physical symbol system. Furthermore, learning classifier systems provide a plausible algorithmic basis by which symbol re-write rules could be trained to undertake behaviors exhibiting systematicity and compositionality, using a kind of natural selection of re-write rules in the brain, We show how the core operation of a learning classifier system, namely, the replication with variation of symbol re-write rules, can be implemented using spike-time dependent plasticity based supervised learning. As a whole, the aim of this paper is to integrate an algorithmic and an implementation level description of a neuronal symbol system capable of sustaining systematic and compositional behaviors. Previously proposed neuronal implementations of symbolic representations are compared with this new proposal. Copyright © 2011 Elsevier Ltd. All rights reserved.

New technical knowledge to be implemented to the revision of rules on pipe wall thinning management for PWR plants

International Nuclear Information System (INIS)

Hirai, Junya; Nakamura, Takao; Amano, Yoichi

2013-01-01

Rules for PWR plant pipe wall thinning management were formulated by the Japan Society of Mechanical Engineers in 2006. Since then thinning management of Japanese PWR plants has been carried out based on this rule. Pipe wall thinning phenomena to be dealt with in this rule have been identified in many piping components of power plants. New technical knowledge has been accumulated since the issuance of 2006 edition. We have formulated these knowledge and information about the thinning phenomena in PWR power plants. Given the history of application of this rule, we have to make our best effort to carry out a study of latest technical knowledge and implement them to the revision of rule and improve pipe wall thinning management. This paper summarizes the new technical knowledge and basis to be implemented to the revision of rules on pipe wall thinning management for PWR plants in Japan. (author)

Developing Novel Reservoir Rule Curves Using Seasonal Inflow Projections

Science.gov (United States)

Tseng, Hsin-yi; Tung, Ching-pin

2015-04-01

Due to significant seasonal rainfall variations, reservoirs and their flexible operational rules are indispensable to Taiwan. Furthermore, with the intensifying impacts of climate change on extreme climate, the frequency of droughts in Taiwan has been increasing in recent years. Drought is a creeping phenomenon, the slow onset character of drought makes it difficult to detect at an early stage, and causes delays on making the best decision of allocating water. For these reasons, novel reservoir rule curves using projected seasonal streamflow are proposed in this study, which can potentially reduce the adverse effects of drought. This study dedicated establishing new rule curves which consider both current available storage and anticipated monthly inflows with leading time of two months to reduce the risk of water shortage. The monthly inflows are projected based on the seasonal climate forecasts from Central Weather Bureau (CWB), which a weather generation model is used to produce daily weather data for the hydrological component of the GWLF. To incorporate future monthly inflow projections into rule curves, this study designs a decision flow index which is a linear combination of current available storage and inflow projections with leading time of 2 months. By optimizing linear relationship coefficients of decision flow index, the shape of rule curves and the percent of water supply in each zone, the best rule curves to decrease water shortage risk and impacts can be developed. The Shimen Reservoir in the northern Taiwan is used as a case study to demonstrate the proposed method. Existing rule curves (M5 curves) of Shimen Reservoir are compared with two cases of new rule curves, including hindcast simulations and historic seasonal forecasts. The results show new rule curves can decrease the total water shortage ratio, and in addition, it can also allocate shortage amount to preceding months to avoid extreme shortage events. Even though some uncertainties in

Action Rules Mining

CERN Document Server

Dardzinska, Agnieszka

2013-01-01

We are surrounded by data, numerical, categorical and otherwise, which must to be analyzed and processed to convert it into information that instructs, answers or aids understanding and decision making. Data analysts in many disciplines such as business, education or medicine, are frequently asked to analyze new data sets which are often composed of numerous tables possessing different properties. They try to find completely new correlations between attributes and show new possibilities for users.   Action rules mining discusses some of data mining and knowledge discovery principles and then describe representative concepts, methods and algorithms connected with action. The author introduces the formal definition of action rule, notion of a simple association action rule and a representative action rule, the cost of association action rule, and gives a strategy how to construct simple association action rules of a lowest cost. A new approach for generating action rules from datasets with numerical attributes...

78 FR 62418 - Application of the Segregation Rules to Small Shareholders

Science.gov (United States)

2013-10-22

... rule will more directly address the tax avoidance concerns underlying the asset threshold included in... tax avoidance potential. The existence of the 10-percent ownership limitation will ensure that the... proposed regulations explains that these additional exceptions are intended to reduce tax administration...

Integrated water resources management using engineering measures

Science.gov (United States)

Huang, Y.

2015-04-01

The management process of Integrated Water Resources Management (IWRM) consists of aspects of policies/strategies, measures (engineering measures and non-engineering measures) and organizational management structures, etc., among which engineering measures such as reservoirs, dikes, canals, etc., play the backbone that enables IWRM through redistribution and reallocation of water in time and space. Engineering measures are usually adopted for different objectives of water utilization and water disaster prevention, such as flood control and drought relief. The paper discusses the planning and implementation of engineering measures in IWRM of the Changjiang River, China. Planning and implementation practices of engineering measures for flood control and water utilization, etc., are presented. Operation practices of the Three Gorges Reservoir, particularly the development and application of regulation rules for flood management, power generation, water supply, ecosystem needs and sediment issues (e.g. erosion and siltation), are also presented. The experience obtained in the implementation of engineering measures in Changjiang River show that engineering measures are vital for IWRM. However, efforts should be made to deal with changes of the river system affected by the operation of engineering measures, in addition to escalatory development of new demands associated with socio-economic development.

Integrated water resources management using engineering measures

Directory of Open Access Journals (Sweden)

Y. Huang

2015-04-01

Full Text Available The management process of Integrated Water Resources Management (IWRM consists of aspects of policies/strategies, measures (engineering measures and non-engineering measures and organizational management structures, etc., among which engineering measures such as reservoirs, dikes, canals, etc., play the backbone that enables IWRM through redistribution and reallocation of water in time and space. Engineering measures are usually adopted for different objectives of water utilization and water disaster prevention, such as flood control and drought relief. The paper discusses the planning and implementation of engineering measures in IWRM of the Changjiang River, China. Planning and implementation practices of engineering measures for flood control and water utilization, etc., are presented. Operation practices of the Three Gorges Reservoir, particularly the development and application of regulation rules for flood management, power generation, water supply, ecosystem needs and sediment issues (e.g. erosion and siltation, are also presented. The experience obtained in the implementation of engineering measures in Changjiang River show that engineering measures are vital for IWRM. However, efforts should be made to deal with changes of the river system affected by the operation of engineering measures, in addition to escalatory development of new demands associated with socio-economic development.

Refining the Relationships among Historical Figures by Implementing Inference Rules in SWRL

Science.gov (United States)

Fajrin Ariyani, Nurul; Saralita, Madis; Sarwosri; Sarno, Riyanarto

2018-03-01

The biography of historical figures is often fascinating to be known. Everything about their character, work, invention, and personal life sometimes are presented in their biography. The social and family relationships among historical figures also put into concern, especially for political figures, heroes, kings or persons who have ever been ruled a monarchy in their past. Some biographies can be found in Wikipedia as articles. Most of the social and family relationship contents of these figures are not completely depicted due to a various article’s contributors and sources. Fortunately, the missing relatives of a person might reside in the other figures’ biography in different pages. Each Wikipedia article has metadata which represents its essential information of content. By processing the metadata obtained from DBpedia and composing the inferencing rules (in the form of ontology) to identify the relationships content, it can generate several new inferred facts that complement the existing relationships. This work proposes a methodology for finding missing relationships among historical figures using inference rules in an ontology. As a result, our method can present new facts about the relationships that absent in the existing Wikipedia articles.

76 FR 43230 - National Pollutant Discharge Elimination System-Cooling Water Intake Structures at Existing...

Science.gov (United States)

2011-07-20

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Parts 122 and 125 [EPA-HQ-OW-2008-0667, FRL-9441-8] RIN 2040-AE95 National Pollutant Discharge Elimination System--Cooling Water Intake Structures at Existing Facilities and Phase I Facilities AGENCY: Environmental Protection Agency (EPA). ACTION: Proposed rule...

Omega version 2.2: Rule-based deterioration identification and management system. Final report

International Nuclear Information System (INIS)

Kataoka, S.; Kojima, T.; Pavinich, W.A.; Andrews, J.D.

1996-06-01

This report presents the Omega Version 2.2 (Ωs) rule-based computer program for identifying material deteriorations in the metallic structures, systems and components of LWR nuclear power units. The basis of Us is that understanding what material deteriorations might occur as a function of service life is fundamental to: (1) the development and optimization of preventive maintenance programs, (2) ensuring that current maintenance programs recognize applicable degradations, and (3) demonstrating the adequacy of deterioration management to safety regulatory authorities. The system was developed to assist utility engineers in determining which aging degradation mechanisms are acting on specific components. Direction is also provided to extend this system to manage deterioration and evaluate the efficacy of existing age-related degradation mitigation programs. This system can provide support for justification for continued operation and license renewal. It provides traceability to the data sources used in the logic development. A tiered approach is used to quickly isolate potential age-related degradation for components in a particular location. A potential degradation mechanism is then screened by additional rules to establish its plausibility. Ωs includes a user-friendly system interface and provides default environmental data and materials in the event they are unknown to the user. Ωs produces a report, with references, that validates the elimination of a degradation mechanism from further consideration or the determination that a specific degradation mechanism is acting on a specific material. This report also describes logic for identifying deterioration caused by intrusions and inspection-based deteriorations, along with future plans to program and integrate these features with Ωs

Incorporating Employee Heterogeneity into Default Rules for Retirement Plan Selection

Science.gov (United States)

Goda, Gopi Shah; Manchester, Colleen Flaherty

2013-01-01

We study the effect of incorporating heterogeneity into default rules by examining the choice between retirement plans at a firm that transitioned from a defined benefit (DB) to a defined contribution (DC) plan. The default plan for existing employees varied discontinuously depending on their age. Employing regression discontinuity techniques,…

Proof of Kochen–Specker Theorem: Conversion of Product Rule to Sum Rule

International Nuclear Information System (INIS)

Toh, S.P.; Zainuddin, Hishamuddin

2009-01-01

Valuation functions of observables in quantum mechanics are often expected to obey two constraints called the sum rule and product rule. However, the Kochen–Specker (KS) theorem shows that for a Hilbert space of quantum mechanics of dimension d ≤ 3, these constraints contradict individually with the assumption of value definiteness. The two rules are not irrelated and Peres [Found. Phys. 26 (1996) 807] has conceived a method of converting the product rule into a sum rule for the case of two qubits. Here we apply this method to a proof provided by Mermin based on the product rule for a three-qubit system involving nine operators. We provide the conversion of this proof to one based on sum rule involving ten operators. (general)

A partition enhanced mining algorithm for distributed association rule mining systems

Directory of Open Access Journals (Sweden)

A.O. Ogunde

2015-11-01

Full Text Available The extraction of patterns and rules from large distributed databases through existing Distributed Association Rule Mining (DARM systems is still faced with enormous challenges such as high response times, high communication costs and inability to adapt to the constantly changing databases. In this work, a Partition Enhanced Mining Algorithm (PEMA is presented to address these problems. In PEMA, the Association Rule Mining Coordinating Agent receives a request and decides the appropriate data sites, partitioning strategy and mining agents to use. The mining process is divided into two stages. In the first stage, the data agents horizontally segment the databases with small average transaction length into relatively smaller partitions based on the number of available sites and the available memory. On the other hand, databases with relatively large average transaction length were vertically partitioned. After this, Mobile Agent-Based Association Rule Mining-Agents, which are the mining agents, carry out the discovery of the local frequent itemsets. At the second stage, the local frequent itemsets were incrementally integrated by the from one data site to another to get the global frequent itemsets. This reduced the response time and communication cost in the system. Results from experiments conducted on real datasets showed that the average response time of PEMA showed an improvement over existing algorithms. Similarly, PEMA incurred lower communication costs with average size of messages exchanged lower when compared with benchmark DARM systems. This result showed that PEMA could be efficiently deployed for efficient discovery of valuable knowledge in distributed databases.

Buckling rules in design codes: state of the art and future developments

Energy Technology Data Exchange (ETDEWEB)

Turbat, A. [FRAMATOME ANP, 69 - Lyon (France); Meziere, Y. [Electricite de France (EDF SEPTEN), 69 - Villeurbanne (France)

2001-07-01

Buckling, which can affect structures like bars, beams and shells when they are submitted to compressive stresses, can lead to unacceptable deformations and ruptures. Consequently, main Design Codes, especially those used in nuclear industry, include rules and analysis methods in order to prevent this phenomenon. In this paper, a review of buckling rules and/or analysis methods existing in ASME, RCC-M, RCC-MR and European Recommendations is performed. Then, these rules and methods are applied to the case of a cylinder filled with water and submitted to a seismic loading and results are compared. In the last part, current developments of methods to analyse creep buckling and dynamic buckling which should come and complete RCC-MR soon are presented. (author)

Buckling rules in design codes: state of the art and future developments

International Nuclear Information System (INIS)

Turbat, A.; Meziere, Y.

2001-01-01

Buckling, which can affect structures like bars, beams and shells when they are submitted to compressive stresses, can lead to unacceptable deformations and ruptures. Consequently, main Design Codes, especially those used in nuclear industry, include rules and analysis methods in order to prevent this phenomenon. In this paper, a review of buckling rules and/or analysis methods existing in ASME, RCC-M, RCC-MR and European Recommendations is performed. Then, these rules and methods are applied to the case of a cylinder filled with water and submitted to a seismic loading and results are compared. In the last part, current developments of methods to analyse creep buckling and dynamic buckling which should come and complete RCC-MR soon are presented. (author)

Evaluation of probabilistic forecasts with the scoringRules package

Science.gov (United States)

Jordan, Alexander; Krüger, Fabian; Lerch, Sebastian

2017-04-01

Over the last decades probabilistic forecasts in the form of predictive distributions have become popular in many scientific disciplines. With the proliferation of probabilistic models arises the need for decision-theoretically principled tools to evaluate the appropriateness of models and forecasts in a generalized way in order to better understand sources of prediction errors and to improve the models. Proper scoring rules are functions S(F,y) which evaluate the accuracy of a forecast distribution F , given that an outcome y was observed. In coherence with decision-theoretical principles they allow to compare alternative models, a crucial ability given the variety of theories, data sources and statistical specifications that is available in many situations. This contribution presents the software package scoringRules for the statistical programming language R, which provides functions to compute popular scoring rules such as the continuous ranked probability score for a variety of distributions F that come up in applied work. For univariate variables, two main classes are parametric distributions like normal, t, or gamma distributions, and distributions that are not known analytically, but are indirectly described through a sample of simulation draws. For example, ensemble weather forecasts take this form. The scoringRules package aims to be a convenient dictionary-like reference for computing scoring rules. We offer state of the art implementations of several known (but not routinely applied) formulas, and implement closed-form expressions that were previously unavailable. Whenever more than one implementation variant exists, we offer statistically principled default choices. Recent developments include the addition of scoring rules to evaluate multivariate forecast distributions. The use of the scoringRules package is illustrated in an example on post-processing ensemble forecasts of temperature.

Automation based on knowledge modeling theory and its applications in engine diagnostic systems using Space Shuttle Main Engine vibrational data. M.S. Thesis

Science.gov (United States)

Kim, Jonnathan H.

1995-01-01

Humans can perform many complicated tasks without explicit rules. This inherent and advantageous capability becomes a hurdle when a task is to be automated. Modern computers and numerical calculations require explicit rules and discrete numerical values. In order to bridge the gap between human knowledge and automating tools, a knowledge model is proposed. Knowledge modeling techniques are discussed and utilized to automate a labor and time intensive task of detecting anomalous bearing wear patterns in the Space Shuttle Main Engine (SSME) High Pressure Oxygen Turbopump (HPOTP).

Second-Guessing Scientists and Engineers: Post Hoc Criticism and the Reform of Practice in Green Chemistry and Engineering.

Science.gov (United States)

Lynch, William T

2015-10-01

The article examines and extends work bringing together engineering ethics and Science and Technology Studies, which had built upon Diane Vaughan's analysis of the Challenger shuttle accident as a test case. Reconsidering the use of her term "normalization of deviance," the article argues for a middle path between moralizing against and excusing away engineering practices contributing to engineering disaster. To explore an illustrative pedagogical case and to suggest avenues for constructive research developing this middle path, it examines the emergence of green chemistry and green engineering. Green chemistry began when Paul Anastas and John Warner developed a set of new rules for chemical synthesis that sought to learn from missed opportunities to avoid environmental damage in the twentieth century, an approach that was soon extended to engineering as well. Examination of tacit assumptions about historical counterfactuals in recent, interdisciplinary discussions of green chemistry illuminate competing views about the field's prospects. An integrated perspective is sought, addressing how both technical practice within chemistry and engineering and the influence of a wider "social movement" can play a role in remedying environmental problems.

Selection rule engineering of forbidden transitions of a hydrogen atom near a nanogap

Science.gov (United States)

Kim, Hyunyoung Y.; Kim, Daisik S.

2018-01-01

We perform an analytical study on the allowance of forbidden transitions for a hydrogen atom placed near line dipole sources, mimicking light emanating from a one-dimensional metallic nanogap. It is shown that the rapid variation of the electric field vector, inevitable in the near zone, completely breaks the selection rule of Δl=±1. While the forbidden transitions between spherically symmetric S states, such as 2S to 1S or 3S to 1S (Δl=0), are rather robust against selection rule breakage, Δl=±2 transitions such as between 3D and 1S or 3D and 2S states are very vulnerable to the spatial variation of the perturbing electric field. Transitions between 2S and 3D states are enhanced by many orders of magnitude, aided by the quadratic nature of both the perturbing Hamiltonian and D wavefunctions. The forbidden dipole moment, which approaches one Bohr radius times the electric charge in the vicinity of the gap, can be written in a simple closed form owing to the one-dimensional nature of our gap. With large enough effective volume together with the symmetric nature of the excited state wavefunctions, our work paves way towards atomic physics application of infinitely long nanogaps.

Using Rule-Based Computer Programming to Unify Communication Rules Research.

Science.gov (United States)

Sanford, David L.; Roach, J. W.

This paper proposes the use of a rule-based computer programming language as a standard for the expression of rules, arguing that the adoption of a standard would enable researchers to communicate about rules in a consistent and significant way. Focusing on the formal equivalence of artificial intelligence (AI) programming to different types of…

76 FR 33161 - Installation and Use of Engine Cut-off Switches on Recreational Vessels

Science.gov (United States)

2011-06-08

... ``Proposed Rule'' and insert ``USCG-2009-0206'' in the ``Keyword'' box. Click ``Search,'' then click on the... ``read comments'' box, which will then become highlighted in blue. In the ``Keyword'' box, insert ``USCG... add definitions that describe the terms ``engine cut-off switch link,'' ``engine cut- off switch...

Convention on nuclear safety. Rules of procedure and financial rules

International Nuclear Information System (INIS)

1998-01-01

The document presents the Rules of Procedure and Financial Rules that apply mutatis mutandis to any meeting of the Contracting Parties to the Convention on Nuclear Safety (INFCIRC/449) convened in accordance with Chapter 3 of the Convention. It includes four parts: General provisions, Preparatory process for review meetings, Review meetings, and Amendment and interpretation of rules

Austenitic stainless steels, status of the properties database and design rule development

Energy Technology Data Exchange (ETDEWEB)

Tavassoli, A.-A. [Commissariat a l`Energie Atomique, CEA-Saclay, Gif-sur Yvette (France). CEREM; Touboul, F. [DMT, Commissariat a l`Energie Atomique, CEA Saclay, Gif-sur-Yvette (France)

1996-10-01

In parallel with the new tasks initiated to substantiate the existing database for the reference structural material (type 316LN-IG) of ITER, interim design criteria are being developed to guide subsequent design stages. The French RCC-MR codes for fast breeder reactors, incorporating rules from other ITER partner codes and those needed to meet specific fusion requirements, are used for this purpose. This paper presents the current status of materials data and design rules for type 316LN-IG steel and describes how the irradiation effects are taken into account. (orig.).

Implementation and automated validation of the minimal Z' model in FeynRules

International Nuclear Information System (INIS)

Basso, L.; Christensen, N.D.; Duhr, C.; Fuks, B.; Speckner, C.

2012-01-01

We describe the implementation of a well-known class of U(1) gauge models, the 'minimal' Z' models, in FeynRules. We also describe a new automated validation tool for FeynRules models which is controlled by a web interface and allows the user to run a complete set of 2 → 2 processes on different matrix element generators, different gauges, and compare between them all. If existing, the comparison with independent implementations is also possible. This tool has been used to validate our implementation of the 'minimal' Z' models. (authors)

Delayed rule following.

Science.gov (United States)

Schmitt, D R

2001-01-01

Although the elements of a fully stated rule (discriminative stimulus [S(D)], some behavior, and a consequence) can occur nearly contemporaneously with the statement of the rule, there is often a delay between the rule statement and the S(D). The effects of this delay on rule following have not been studied in behavior analysis, but they have been investigated in rule-like settings in the areas of prospective memory (remembering to do something in the future) and goal pursuit. Discriminative events for some behavior can be event based (a specific setting stimulus) or time based. The latter are more demanding with respect to intention following and show age-related deficits. Studies suggest that the specificity with which the components of a rule (termed intention) are stated has a substantial effect on intention following, with more detailed specifications increasing following. Reminders of an intention, too, are most effective when they refer specifically to both the behavior and its occasion. Covert review and written notes are two effective strategies for remembering everyday intentions, but people who use notes appear not to be able to switch quickly to covert review. By focusing on aspects of the setting and rule structure, research on prospective memory and goal pursuit expands the agenda for a more complete explanation of rule effects.

A study of the displacement of a Wankel rotary engine

Science.gov (United States)

Beard, J. E.; Pennock, G. R.

1993-03-01

The volumetric displacement of a Wankel rotary engine is a function of the trochoid ratio and the pin size ratio, assuming the engine has a unit depth and the number of lobes is specified. The mathematical expression which defines the displacement contains a function which can be evaluated directly and a normal elliptic integral of the second type which does not have an explicit solution. This paper focuses on the contribution of the elliptic integral to the total displacement of the engine. The influence of the elliptic integral is shown to account for as much as 20 percent of the total displacement, depending on the trochoid ratio and the pin size ratio. Two numerical integration techniques are compared in the paper, namely, the trapezoidal rule and Simpson's 1/3 rule. The bounds on the error, associated with each numerical method, are analyzed. The results indicate that the numerical method has a minimal effect on the accuracy of the calculated displacement for a practical number of integration steps. The paper also evaluates the influence of manufacturing tolerances on the calculated displacement and the actual displacement. Finally. a numerical example of the common three-lobed Wankel rotary engine is included for illustrative purposes.

Hamburg rules V Hague Visby rules an English perspective

OpenAIRE

Tozaj Dorian; Xhelilaj Ermal

2010-01-01

It has often been argued for the effect of defences provided to carriers under Art IV (2) of Hague Visby Rules to almost nullify the protection guaranteed to shippers in other provisions of this convention. Therefore an all embracing universal shipper friendly convention, merely the Hamburg Rules, need be incorporated in all countries in order to address this issue and fully satisfy the intentions of the parties for the establishment of international rules in international trade

Numerical Modelling of the Operation of a Novel Two Stroke V4 Engine

OpenAIRE

Albert Boretti

2017-01-01

The paper presents simulations of the operation of a novel two-stroke engine for road Super Sport motorcycles. Two-stroke engines were preferred to four-stroke engines in Grand Prix motorcycle racing until the start of the Moto GP era when new rules phased out the two-stroke engines. Reasons for the change were the poor fuel economy and significant pollutant emissions. The paper discusses the opportunity of a came back at least in road Super Sport motorcycles thanks to the recent advantages i...

76 FR 36606 - Self-Regulatory Organizations; The NASDAQ OMX PHLX LLC; Order Granting Approval of Proposed Rule...

Science.gov (United States)

2011-06-22

... book at the same price. Specifically, proposed Phlx Rule 1064(e) would provide that Floor QCC Orders... exposure if no Customer Orders \\8\\ exist on the Exchange's order book at the same price. \\7\\ Phlx Rule 1080... same issuer, or involve the securities of participants in mergers or with intentions to merge that have...

Space-Based Infrared System-Supportability Engineering and Acquisition Reform in an Existing Acquisition Environment

National Research Council Canada - National Science Library

Fickes, Richard

1999-01-01

.... SBIRS is being developed in three increments. This article discusses supportability requirements definition and the implementation of supportability engineering in SBIRS evolution from an Integrated Product Team (IPT) aspect...

Developing an Ontology-Based Rollover Monitoring and Decision Support System for Engineering Vehicles

Directory of Open Access Journals (Sweden)

Feixiang Xu

2018-05-01

Full Text Available The increasing number of rollover accidents of engineering vehicles has attracted close attention; however, most researchers focus on the analysis and monitoring of rollover stability indexes and seldom the assessment and decision support for the rollover risk of engineering vehicles. In this context, an ontology-based rollover monitoring and decision support system for engineering vehicles is proposed. The ontology model is built for representing monitored rollover stability data with semantic properties and for constructing semantic relevance among the various concepts involved in the rollover domain. On the basis of this, ontology querying and reasoning methods based on the Simple Protocol and RDF Query Language (SPARQL and Semantic Web Rule Language (SWRL rules are utilized to realize the rollover risk assessment and to obtain suggested measures. PC and mobile applications (APPs have also been developed to implement the above methods. In addition, five sets of rollover stability data for an articulated off-road engineering vehicle under different working conditions were analyzed to verify the accuracy and effectiveness of the proposed system.

Definition study for variable cycle engine testbed engine and associated test program

Science.gov (United States)

Vdoviak, J. W.

1978-01-01

The product/study double bypass variable cycle engine (VCE) was updated to incorporate recent improvements. The effect of these improvements on mission range and noise levels was determined. This engine design was then compared with current existing high-technology core engines in order to define a subscale testbed configuration that simulated many of the critical technology features of the product/study VCE. Detailed preliminary program plans were then developed for the design, fabrication, and static test of the selected testbed engine configuration. These plans included estimated costs and schedules for the detail design, fabrication and test of the testbed engine and the definition of a test program, test plan, schedule, instrumentation, and test stand requirements.

Resolving task rule incongruence during task switching by competitor rule suppression.

Science.gov (United States)

Meiran, Nachshon; Hsieh, Shulan; Dimov, Eduard

2010-07-01

Task switching requires maintaining readiness to execute any task of a given set of tasks. However, when tasks switch, the readiness to execute the now-irrelevant task generates interference, as seen in the task rule incongruence effect. Overcoming such interference requires fine-tuned inhibition that impairs task readiness only minimally. In an experiment involving 2 object classification tasks and 2 location classification tasks, the authors show that irrelevant task rules that generate response conflicts are inhibited. This competitor rule suppression (CRS) is seen in response slowing in subsequent trials, when the competing rules become relevant. CRS is shown to operate on specific rules without affecting similar rules. CRS and backward inhibition, which is another inhibitory phenomenon, produced additive effects on reaction time, suggesting their mutual independence. Implications for current formal theories of task switching as well as for conflict monitoring theories are discussed. (c) 2010 APA, all rights reserved

Pipeline engineering. 8. rev. and enl. ed.

International Nuclear Information System (INIS)

Wagner, W.

2000-01-01

Apart from calculating the strength of pipeline components planning and design are the most important tasks on the areas of apparatus manufacturing, fluid engineering, process engineering and thermal engineering. It is therefore necessary that the flow diagrams of a plant are clearly understandable and in accordance with the technical rules even in the early stages of planning. This book concentrates on steel pipeline which are not laid underground but of the type used mostly in industrial applications. The pictures and equations provided can be used for the design of pipelines, tables and diagrams are given to facilitate estimation of elasticity, pipeline pressure losses and insulating thicknesses. An overview of the equations is given at the end of the book. Many examples facilitate learning. (orig.) [de

76 FR 31906 - Endangered and Threatened Wildlife and Plants; Revising the Special Rule for the Utah Prairie Dog

Science.gov (United States)

2011-06-02

... Special Rule for the Utah Prairie Dog AGENCY: Fish and Wildlife Service, Interior. ACTION: Proposed rule... prairie dog. We are proposing to revise the existing limits on take, and we also propose a new incidental... dogs see: http://www.fws.gov/mountain-prairie/species/mammals/UTprairiedog or http://ecos.fws.gov...

The Kernel Estimation in Biosystems Engineering

Directory of Open Access Journals (Sweden)

Esperanza Ayuga Téllez

2008-04-01

Full Text Available In many fields of biosystems engineering, it is common to find works in which statistical information is analysed that violates the basic hypotheses necessary for the conventional forecasting methods. For those situations, it is necessary to find alternative methods that allow the statistical analysis considering those infringements. Non-parametric function estimation includes methods that fit a target function locally, using data from a small neighbourhood of the point. Weak assumptions, such as continuity and differentiability of the target function, are rather used than "a priori" assumption of the global target function shape (e.g., linear or quadratic. In this paper a few basic rules of decision are enunciated, for the application of the non-parametric estimation method. These statistical rules set up the first step to build an interface usermethod for the consistent application of kernel estimation for not expert users. To reach this aim, univariate and multivariate estimation methods and density function were analysed, as well as regression estimators. In some cases the models to be applied in different situations, based on simulations, were defined. Different biosystems engineering applications of the kernel estimation are also analysed in this review.

Cross-Field Comparison of Ethics Education: Golden Rules and Particulars.

Science.gov (United States)

Mulhearn, Tyler J; Watts, Logan L; Torrence, Brett S; Todd, E Michelle; Turner, Megan R; Connelly, Shane; Mumford, Michael D

2017-01-01

Research misconduct negatively impacts the scientific community and society in general. Providing training in the responsible conduct of research (RCR) to researchers is one viable approach to minimizing research misconduct. Although recent evidence suggests ethics training can indeed be effective, little empirical work has examined the similarities and differences across fields. In the present study, we analyzed 62 empirical studies in engineering, biomedical science, social science, and mixed fields. The findings suggest certain instructional principles, or "golden rules," apply generally to all fields. These golden rules include maintaining a field-specific or field-general approach and emphasizing processes in training. The findings also suggest that content areas contributing to instructional effectiveness vary as a function of field. Generally, it appears that all fields may benefit from taking a multi-pronged approach to ethics education wherein the salient field issues are covered. Implications for RCR education are discussed.

Analysis of the iteratively regularized Gauss-Newton method under a heuristic rule

Science.gov (United States)

Jin, Qinian; Wang, Wei

2018-03-01

The iteratively regularized Gauss-Newton method is one of the most prominent regularization methods for solving nonlinear ill-posed inverse problems when the data is corrupted by noise. In order to produce a useful approximate solution, this iterative method should be terminated properly. The existing a priori and a posteriori stopping rules require accurate information on the noise level, which may not be available or reliable in practical applications. In this paper we propose a heuristic selection rule for this regularization method, which requires no information on the noise level. By imposing certain conditions on the noise, we derive a posteriori error estimates on the approximate solutions under various source conditions. Furthermore, we establish a convergence result without using any source condition. Numerical results are presented to illustrate the performance of our heuristic selection rule.

Choosing the rules: distinct and overlapping frontoparietal representations of task rules for perceptual decisions.

Science.gov (United States)

Zhang, Jiaxiang; Kriegeskorte, Nikolaus; Carlin, Johan D; Rowe, James B

2013-07-17

Behavior is governed by rules that associate stimuli with responses and outcomes. Human and monkey studies have shown that rule-specific information is widely represented in the frontoparietal cortex. However, it is not known how establishing a rule under different contexts affects its neural representation. Here, we use event-related functional MRI (fMRI) and multivoxel pattern classification methods to investigate the human brain's mechanisms of establishing and maintaining rules for multiple perceptual decision tasks. Rules were either chosen by participants or specifically instructed to them, and the fMRI activation patterns representing rule-specific information were compared between these contexts. We show that frontoparietal regions differ in the properties of their rule representations during active maintenance before execution. First, rule-specific information maintained in the dorsolateral and medial frontal cortex depends on the context in which it was established (chosen vs specified). Second, rule representations maintained in the ventrolateral frontal and parietal cortex are independent of the context in which they were established. Furthermore, we found that the rule-specific coding maintained in anticipation of stimuli may change with execution of the rule: representations in context-independent regions remain invariant from maintenance to execution stages, whereas rule representations in context-dependent regions do not generalize to execution stage. The identification of distinct frontoparietal systems with context-independent and context-dependent task rule representations, and the distinction between anticipatory and executive rule representations, provide new insights into the functional architecture of goal-directed behavior.

A new sum rule relating the deep-inelastic polarized structure function to the cross section of photoproduction

International Nuclear Information System (INIS)

Koretune, Susumu

1993-01-01

A sum rule which relates the deep-inelastic polarized structure function g 1 p (x,Q 2 ) to the cross section of photoproduction, (σ 3/2 -σ 1/2 ), is derived. This rule makes it possible to compare the integral of g 1 p (x,Q 2 ) with the Drell-Hearn-Gerasimov sum rule without worrying about contributions from higher twist terms. Further this sum rule shows that there may exist a dynamical mechanism which relates the low energy region to the high energy one. It is conjectured that the spontaneous chiral symmetry breaking of the vacuum is the origin of this mechanism. (author)

QCD and power corrections to sum rules in deep-inelastic lepton-nucleon scattering

International Nuclear Information System (INIS)

Ravindran, V.; Neerven, W.L. van

2001-01-01

In this paper we study QCD and power corrections to sum rules which show up in deep-inelastic lepton-hadron scattering. Furthermore we will make a distinction between fundamental sum rules which can be derived from quantum field theory and those which are of a phenomenological origin. Using current algebra techniques the fundamental sum rules can be expressed into expectation values of (partially) conserved (axial-)vector currents sandwiched between hadronic states. These expectation values yield the quantum numbers of the corresponding hadron which are determined by the underlying flavour group SU(n) F . In this case one can show that there exist an intimate relation between the appearance of power and QCD corrections. The above features do not hold for phenomenological sum rules, hereafter called non-fundamental. They have no foundation in quantum field theory and they mostly depend on certain assumptions made for the structure functions like super-convergence relations or the parton model. Therefore only the fundamental sum rules provide us with a stringent test of QCD

Engineering support strategies in the competitive environment

International Nuclear Information System (INIS)

Casella, L.R.; Hall, T.E.; Stark, D.R.

1996-01-01

This paper focuses on the innovative use of support personnel during plant outages and other maintenance/upkeep periods. At the South Texas Project the authors have formed an engineering support group specifically tailored to provide real time solutions to maintenance and operation problems. The core group consists of a cross section from the engineering disciplines and systems engineers. The group is housed in the Maintenance and Operations Facility adjacent to the power block. Close proximity and maintenance and operations personnel improves communications and response to emergent technical issues. During outages the group is augmented with additional personnel from the Design and Systems Engineering Departments. This allows for around the clock support that directly complements plant operations activities and maintenance tasks. The Thirty Minute Rule highlights urgent issues requiring engineering management attention. Dedicated twenty-four (24) hour engineering management oversight completes the engineering outage support package. Revised procedures, networks, and software enhancements, streamline the interface between engineering and work control processes. Good communications across the engineering disciplines and departments provide for enhanced teamwork and timely resolution of emergent technical issues for customers. The techniques to be described in the paper contributed directly to the South Texas Project recently establishing a new world record for a Westinghouse 3 and 4 loop pressurized water reactor refueling outage

Smooth criminal: convicted rule-breakers show reduced cognitive conflict during deliberate rule violations.

Science.gov (United States)

Jusyte, Aiste; Pfister, Roland; Mayer, Sarah V; Schwarz, Katharina A; Wirth, Robert; Kunde, Wilfried; Schönenberg, Michael

2017-09-01

Classic findings on conformity and obedience document a strong and automatic drive of human agents to follow any type of rule or social norm. At the same time, most individuals tend to violate rules on occasion, and such deliberate rule violations have recently been shown to yield cognitive conflict for the rule-breaker. These findings indicate persistent difficulty to suppress the rule representation, even though rule violations were studied in a controlled experimental setting with neither gains nor possible sanctions for violators. In the current study, we validate these findings by showing that convicted criminals, i.e., individuals with a history of habitual and severe forms of rule violations, can free themselves from such cognitive conflict in a similarly controlled laboratory task. These findings support an emerging view that aims at understanding rule violations from the perspective of the violating agent rather than from the perspective of outside observer.

Application of decision rules for empowering of Indonesian telematics services SMEs

Science.gov (United States)

Tosida, E. T.; Hairlangga, O.; Amirudin, F.; Ridwanah, M.

2018-03-01

The independence of the field of telematics became one of Indonesia's vision in 2024. One effort to achieve it can be done by empowering SMEs in the field of telematics. Empowerment carried out need a practical mechanism by utilizing data centered, including through the National Economic Census database (Susenas). Based on the Susenas can be formulated the decision rules of determining the provision of assistance for SMEs in the field of telematics. The way it did by generating the rule base through the classification technique. The CART algorithm-based decision rule model performs better than C45 and ID3 models. The high level of performance model is also in line with the regulations applied by the government. This becomes one of the strengths of research, because the resulting model is consistent with the existing conditions in Indonesia. The rules base generated from the three classification techniques show different rules. The CART technique has pattern matching with the realization of activities in The Ministry of Cooperatives and SMEs. So far, the government has difficulty in referring data related to the empowerment of SMEs telematics services. Therefore, the findings resulting from this research can be used as an alternative decision support system related to the program of empowerment of SMEs in telematics.

Testing the cranial evolutionary allometric 'rule' in Galliformes.

Science.gov (United States)

Linde-Medina, M

2016-09-01

Recent comparative studies have indicated the existence of a common cranial evolutionary allometric (CREA) pattern in mammals and birds, in which smaller species have relatively smaller faces and bigger braincases than larger species. In these studies, cranial allometry was tested using a multivariate regression between shape (described using landmarks coordinates) and size (i.e. centroid size), after accounting for phylogenetic relatedness. Alternatively, cranial allometry can be determined by comparing the sizes of two anatomical parts using a bivariate regression analysis. In this analysis, a slope higher or lower than one indicates the existence of positive or negative allometry, respectively. Thus, in those species that support the CREA 'rule', positive allometry is expected for the association between face size and braincase size, which would indicate that larger species have disproportionally larger faces. In this study, I applied these two approaches to explore cranial allometry in 83 Galliformes (Aves, Galloanserae), ranging in mean body weight from 30 g to 2.5 kg. The multivariate regression between shape and centroid size revealed the existence of a significant allometric pattern resembling CREA, whereas the second analysis revealed a negative allometry for beak size and braincase size (i.e. contrary to the CREA 'rule', larger galliform species have disproportionally shorter beaks than smaller galliform species). This study suggests that the presence of CREA may be overestimated when using cranium size as the standard measurement. © 2016 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2016 European Society For Evolutionary Biology.

New technical knowledge to be implemented to the revision of rules on pipe wall thinning management for PWR Plants. 2006 edition

International Nuclear Information System (INIS)

Hirai, Junya; Amano, Yoichi; Nakamura, Takao

2013-01-01

Rules for PWR plant pipe wall thinning management were formulated by the Japan Society of Mechanical Engineers in 2006. Since then thinning management of Japanese PWR plants has been carried out based on this rule. Pipe wall thinning phenomena to be dealt with in this rule have been identified in many piping components of power plants. New technical knowledge has been accumulated since the issuance of 2006 edition. We have formulated these knowledge and information about the thinning phenomena in PWR power plants. Given the history of application of this rule, we have to make our best effort to carry out a study of latest technical knowledge and implement them to the revision of rule and improve pipe wall thinning management. This paper summarizes the new technical knowledge and basis to be implemented to the revision of rules on pipe wall thinning management for PWR plants in Japan. (author)

An introduction to network modeling and simulation for the practicing engineer

CERN Document Server

Burbank, Jack; Ward, Jon

2011-01-01

This book provides the practicing engineer with a concise listing of commercial and open-source modeling and simulation tools currently available including examples of implementing those tools for solving specific Modeling and Simulation examples. Instead of focusing on the underlying theory of Modeling and Simulation and fundamental building blocks for custom simulations, this book compares platforms used in practice, and gives rules enabling the practicing engineer to utilize available Modeling and Simulation tools. This book will contain insights regarding common pitfalls in network Modeling and Simulation and practical methods for working engineers.

A networked voting rule for democratic representation

Science.gov (United States)

Hernández, Alexis R.; Gracia-Lázaro, Carlos; Brigatti, Edgardo; Moreno, Yamir

2018-03-01

We introduce a general framework for exploring the problem of selecting a committee of representatives with the aim of studying a networked voting rule based on a decentralized large-scale platform, which can assure a strong accountability of the elected. The results of our simulations suggest that this algorithm-based approach is able to obtain a high representativeness for relatively small committees, performing even better than a classical voting rule based on a closed list of candidates. We show that a general relation between committee size and representatives exists in the form of an inverse square root law and that the normalized committee size approximately scales with the inverse of the community size, allowing the scalability to very large populations. These findings are not strongly influenced by the different networks used to describe the individuals' interactions, except for the presence of few individuals with very high connectivity which can have a marginal negative effect in the committee selection process.

A networked voting rule for democratic representation

Science.gov (United States)

Brigatti, Edgardo; Moreno, Yamir

2018-01-01

We introduce a general framework for exploring the problem of selecting a committee of representatives with the aim of studying a networked voting rule based on a decentralized large-scale platform, which can assure a strong accountability of the elected. The results of our simulations suggest that this algorithm-based approach is able to obtain a high representativeness for relatively small committees, performing even better than a classical voting rule based on a closed list of candidates. We show that a general relation between committee size and representatives exists in the form of an inverse square root law and that the normalized committee size approximately scales with the inverse of the community size, allowing the scalability to very large populations. These findings are not strongly influenced by the different networks used to describe the individuals’ interactions, except for the presence of few individuals with very high connectivity which can have a marginal negative effect in the committee selection process. PMID:29657817

Vibro-acoustic condition monitoring of Internal Combustion Engines: A critical review of existing techniques

Science.gov (United States)

Delvecchio, S.; Bonfiglio, P.; Pompoli, F.

2018-01-01

This paper deals with the state-of-the-art strategies and techniques based on vibro-acoustic signals that can monitor and diagnose malfunctions in Internal Combustion Engines (ICEs) under both test bench and vehicle operating conditions. Over recent years, several authors have summarized what is known in critical reviews mainly focused on reciprocating machines in general or on specific signal processing techniques: no attempts to deal with IC engine condition monitoring have been made. This paper first gives a brief summary of the generation of sound and vibration in ICEs in order to place further discussion on fault vibro-acoustic diagnosis in context. An overview of the monitoring and diagnostic techniques described in literature using both vibration and acoustic signals is also provided. Different faulty conditions are described which affect combustion, mechanics and the aerodynamics of ICEs. The importance of measuring acoustic signals, as opposed to vibration signals, is due since the former seem to be more suitable for implementation on on-board monitoring systems in view of their non-intrusive behaviour, capability in simultaneously capturing signatures from several mechanical components and because of the possibility of detecting faults affecting airborne transmission paths. In view of the recent needs of the industry to (-) optimize component structural durability adopting long-life cycles, (-) verify the engine final status at the end of the assembly line and (-) reduce the maintenance costs monitoring the ICE life during vehicle operations, monitoring and diagnosing system requests are continuously growing up. The present review can be considered a useful guideline for test engineers in understanding which types of fault can be diagnosed by using vibro-acoustic signals in sufficient time in both test bench and operating conditions and which transducer and signal processing technique (of which the essential background theory is here reported) could be

Engineering for Sustainable Development - an Obligatory Skill of the Future Engineer

DEFF Research Database (Denmark)

Alting, Leo

2001-01-01

, the environmental and the social/societal. The economical responsibility is handled by the well-known and accepted methods/tools/regulations, to handle the environmental responsibility good engineering methods and tools are appearing, but to handle the social/societal responsibility only fragmented and inconsistent...... elements exist. However, one thing is clear - we will have to provide our engineering students with understanding, methods and tools so that they can engineer sustainable solutions - especially engineer environmentally friendlier solutions. The Department of Manufacturing Engineering and the Institute...... for Product Development have actively taken part in the development from awareness of the environmental problems to providing methods and tools to support a sustainable development. The situation today in the education at DTU is shortly mentioned and the education at the Department of Manufacturing...

The Rules of the Game—The Rules of the Player

DEFF Research Database (Denmark)

Thorhauge, Anne Mette

2013-01-01

of the game manager in order to implement the rules and provide a world for the other players. In online role-playing games, a programmed system simulates the rule system as well as part of the game manager’s tasks, while the rest of the activity is up to the players to define. Some aspects may translate more......This article presents a critical view of the concept of rules in game studies on the basis of a case study of role-playing across media. Role-playing in its traditional form is a complex activity including a game system and a number of communicative conventions where one player takes the role...... or less unproblematically across media, others are transformed by the introduction of the programmed system. This reveals some important perspectives on the sort of rules that can be simulated in a programmed system and what this means to the concept of rules in game studies....

Rule-bases construction through self-learning for a table-based Sugeno-Takagi fuzzy logic control system

Directory of Open Access Journals (Sweden)

C. Boldisor

2009-12-01

Full Text Available A self-learning based methodology for building the rule-base of a fuzzy logic controller (FLC is presented and verified, aiming to engage intelligent characteristics to a fuzzy logic control systems. The methodology is a simplified version of those presented in today literature. Some aspects are intentionally ignored since it rarely appears in control system engineering and a SISO process is considered here. The fuzzy inference system obtained is a table-based Sugeno-Takagi type. System’s desired performance is defined by a reference model and rules are extracted from recorded data, after the correct control actions are learned. The presented algorithm is tested in constructing the rule-base of a fuzzy controller for a DC drive application. System’s performances and method’s viability are analyzed.

Lineage of global civil engineering. Global civil engineering no keifu

Energy Technology Data Exchange (ETDEWEB)

Hashimoto, M

1994-04-15

This paper considers which way the global civil engineering should go in the future. Civil engineering has now a paradigm with a new dimension debuted as the global environmental problems are taken up specifically. Achieving the target of civil engineering requires a critical review that how the cost effect and efficiency discussions in only the dimensions of the conventional technologies and economies can be incorporated into the dimensions and measures of new fields to create the new horizons. Conceiving the relationship between civil engineered structures and environmental climate encounters the indispensable judgment criterion on how such social scientific conditions as weather, culture, religion, economy, and politics are combined to reach a judgment. The global civil engineering is desired to have the ideas and directional role to work on the ultimate assignment of environment and development called a global environmental problem analytically, comprehensively, innovatively and creatively as the civil engineering science, rather than as a mere existence of one area of the advanced civil engineering science. 5 refs., 1 tab.

The Okubo-Zweig-Iizuka rule and dual unitarization

International Nuclear Information System (INIS)

Ninomiya, Kansuke; Toyoda, Fumihiko.

1978-01-01

The Okubo-Zweig-Iizuka (OZI) rule carries an important role in the constituent rearrangement and interest in the rule has been increased by the discovery of the J/psi particle. An example of phenomenological analysis related to the OZI rule is introduced. The decays of psi particles can be explained consistently by an existence of the disconnected type of a constituent rearrangement diagram (CRD) with comparable strength to that of the connected one. A survey of an outline of the dual unitarization scheme and discussion of the OZI rule with the scheme and other related theory are presented. The method of dual unitarization starts with the unitarity relation. In the estimation of multiparticle production amplitude in the unitarity sum, dominant nondiffractive production component is taken as a first approximation and the amplitude is described by the multiperipheral model of Reggeon exchange. Here, a case of meson-meson scattering in flavor of SU(N) scheme is considered. A survey of the mechanism of the planar bootstrap and Pomeron generation in the dual unitarization is made. The nonplanar CR diagrams give breaking of various features at the planar level. The reaction with the disconnected CRD could occur in the nonperipheral region through the hard collision of constituent and appears at large momentum transfers in comparable order with a connected one. Baryon and baryoniums with the scheme of the dual unitarization are examined. (Kato, T.)

A Return to Innovative Engineering Design, Critical Thinking and Systems Engineering

Science.gov (United States)

Camarda, Charles J.

2007-01-01

I believe we are facing a critical time where innovative engineering design is of paramount importance to the success of our aerospace industry. However, the very qualities and attributes necessary for enhancing, educating, and mentoring a creative spirit are in decline in important areas. The importance of creativity and innovation in this country was emphasized by a special edition of the Harvard Business Review OnPoint entitled: "The Creative Company" which compiled a series of past and present articles on the subject of creativity and innovation and stressed its importance to our national economy. There is also a recognition of a lack of engineering, critical thinking and problem-solving skills in our education systems and a trend toward trying to enhance those skills by developing K-12 educational programs such as Project Lead the Way, "Science for All Americans", Benchmarks 2061 , etc. In addition, with respect to spacecraft development, we have a growing need for young to mid-level engineers with appropriate experience and skills in spacecraft design, development, analysis, testing, and systems engineering. As the Director of Engineering at NASA's Johnson Space Center, I realized that sustaining engineering support of an operational human spacecraft such as the Space Shuttle is decidedly different than engineering design and development skills necessary for designing a new spacecraft such as the Crew Exploration Vehicle of the Constellation Program. We learned a very important lesson post Columbia in that the Space Shuttle is truly an experimental and not an operational vehicle and the strict adherence to developed rules and processes and chains of command of an inherently bureaucratic organizational structure will not protect us from a host of known unknowns let alone unknown unknowns. There are no strict rules, processes, or procedures for understanding anomalous results of an experiment, anomalies with an experimental spacecraft like Shuttle, or in the

Light Cone Sum Rules for gamma*N ->Delta Transition Form Factors

Energy Technology Data Exchange (ETDEWEB)

V.M. Braun; A. Lenz; G. Peters; A. Radyushkin

2006-02-01

A theoretical framework is suggested for the calculation of {gamma}* N {yields} {Delta} transition form factors using the light-cone sum rule approach. Leading-order sum rules are derived and compared with the existing experimental data. We find that the transition form factors in a several GeV region are dominated by the ''soft'' contributions that can be thought of as overlap integrals of the valence components of the hadron wave functions. The ''minus'' components of the quark fields contribute significantly to the result, which can be reinterpreted as large contributions of the quark orbital angular momentum.

Chinese Preschoolers' Resource Allocation in the Face of Existing Inequality under Collaborative and Noncollaborative Contexts

Science.gov (United States)

Chai, Qiao; He, Jie

2017-01-01

The current study investigated the stage at which Chinese preschoolers started considering recipients' material welfare and minimizing existing inequalities under both noncollaborative and collaborative contexts. Also, it analyzed how they behaved when recipients' material welfare was in conflict with merit or equality rule. Experiment 1 found…

Final Rule for Nonconformance Penalties for On-Highway Heavy-Duty Diesel Engines

Science.gov (United States)

EPA is taking final action to establish nonconformance penalties (NCPs) for manufacturers of heavy heavy-duty diesel engines (HHDDE) in model years 2012 and later for emissions of oxides of nitrogen (NOX) because we have found the criteria for NCPs.

Rule-based modeling: a computational approach for studying biomolecular site dynamics in cell signaling systems

Science.gov (United States)

Chylek, Lily A.; Harris, Leonard A.; Tung, Chang-Shung; Faeder, James R.; Lopez, Carlos F.

2013-01-01

Rule-based modeling was developed to address the limitations of traditional approaches for modeling chemical kinetics in cell signaling systems. These systems consist of multiple interacting biomolecules (e.g., proteins), which themselves consist of multiple parts (e.g., domains, linear motifs, and sites of phosphorylation). Consequently, biomolecules that mediate information processing generally have the potential to interact in multiple ways, with the number of possible complexes and post-translational modification states tending to grow exponentially with the number of binary interactions considered. As a result, only large reaction networks capture all possible consequences of the molecular interactions that occur in a cell signaling system, which is problematic because traditional modeling approaches for chemical kinetics (e.g., ordinary differential equations) require explicit network specification. This problem is circumvented through representation of interactions in terms of local rules. With this approach, network specification is implicit and model specification is concise. Concise representation results in a coarse graining of chemical kinetics, which is introduced because all reactions implied by a rule inherit the rate law associated with that rule. Coarse graining can be appropriate if interactions are modular, and the coarseness of a model can be adjusted as needed. Rules can be specified using specialized model-specification languages, and recently developed tools designed for specification of rule-based models allow one to leverage powerful software engineering capabilities. A rule-based model comprises a set of rules, which can be processed by general-purpose simulation and analysis tools to achieve different objectives (e.g., to perform either a deterministic or stochastic simulation). PMID:24123887

Rule-based modeling: a computational approach for studying biomolecular site dynamics in cell signaling systems.

Science.gov (United States)

Chylek, Lily A; Harris, Leonard A; Tung, Chang-Shung; Faeder, James R; Lopez, Carlos F; Hlavacek, William S

2014-01-01

Rule-based modeling was developed to address the limitations of traditional approaches for modeling chemical kinetics in cell signaling systems. These systems consist of multiple interacting biomolecules (e.g., proteins), which themselves consist of multiple parts (e.g., domains, linear motifs, and sites of phosphorylation). Consequently, biomolecules that mediate information processing generally have the potential to interact in multiple ways, with the number of possible complexes and posttranslational modification states tending to grow exponentially with the number of binary interactions considered. As a result, only large reaction networks capture all possible consequences of the molecular interactions that occur in a cell signaling system, which is problematic because traditional modeling approaches for chemical kinetics (e.g., ordinary differential equations) require explicit network specification. This problem is circumvented through representation of interactions in terms of local rules. With this approach, network specification is implicit and model specification is concise. Concise representation results in a coarse graining of chemical kinetics, which is introduced because all reactions implied by a rule inherit the rate law associated with that rule. Coarse graining can be appropriate if interactions are modular, and the coarseness of a model can be adjusted as needed. Rules can be specified using specialized model-specification languages, and recently developed tools designed for specification of rule-based models allow one to leverage powerful software engineering capabilities. A rule-based model comprises a set of rules, which can be processed by general-purpose simulation and analysis tools to achieve different objectives (e.g., to perform either a deterministic or stochastic simulation). © 2013 Wiley Periodicals, Inc.

Using business critical design rules to frame new architecture introduction in multi-architecture portfolios

DEFF Research Database (Denmark)

Løkkegaard, Martin; Mortensen, Niels Henrik; Hvam, Lars

2018-01-01

component sharing, or sharing critical design principles. This alignment is not trivial, as extensive design knowledge is needed to overview a portfolio with many, often highly different products and manufacturing lines. In this paper, we suggest establishing a frame of reference for new......When introducing new architectures to an industrial portfolio, counting multiple existing product and manufacturing solutions, time-to-market and investments in manufacturing equipment can be significantly reduced if new concepts are aligned with the existing portfolio. This can be done through......-product introduction based on several ‘game rules’, or Business Critical Design Rules (BCDRs), which denote the most critical features of the product and manufacturing architectures, and should be considered an obligatory reference for design when introducing new architectures. BCDRs are derived from the portfolio...

RuleMaDrone: A Web-Interface to Visualise Space Usage Rules for Drones

OpenAIRE

Trippaers, Aäron

2015-01-01

RuleMaDrone, an application developed within this thesis, is presented as a solution to communicate the rules and regulations to drone operators. To provide the solution a framework for drone safety was designed which consists of the rules and regulations, the drone properties and the environmental factors. RuleMaDrone is developed with this framework and thus will provide drone operators with an application which they can use to find a safe and legal fly zone. RuleMaDrone u...

Strategy as simple rules.

Science.gov (United States)

Eisenhardt, K M; Sull, D N

2001-01-01

The success of Yahoo!, eBay, Enron, and other companies that have become adept at morphing to meet the demands of changing markets can't be explained using traditional thinking about competitive strategy. These companies have succeeded by pursuing constantly evolving strategies in market spaces that were considered unattractive according to traditional measures. In this article--the third in an HBR series by Kathleen Eisenhardt and Donald Sull on strategy in the new economy--the authors ask, what are the sources of competitive advantage in high-velocity markets? The secret, they say, is strategy as simple rules. The companies know that the greatest opportunities for competitive advantage lie in market confusion, but they recognize the need for a few crucial strategic processes and a few simple rules. In traditional strategy, advantage comes from exploiting resources or stable market positions. In strategy as simple rules, advantage comes from successfully seizing fleeting opportunities. Key strategic processes, such as product innovation, partnering, or spinout creation, place the company where the flow of opportunities is greatest. Simple rules then provide the guidelines within which managers can pursue such opportunities. Simple rules, which grow out of experience, fall into five broad categories: how- to rules, boundary conditions, priority rules, timing rules, and exit rules. Companies with simple-rules strategies must follow the rules religiously and avoid the temptation to change them too frequently. A consistent strategy helps managers sort through opportunities and gain short-term advantage by exploiting the attractive ones. In stable markets, managers rely on complicated strategies built on detailed predictions of the future. But when business is complicated, strategy should be simple.

49 CFR 222.41 - How does this rule affect Pre-Rule Quiet Zones and Pre-Rule Partial Quiet Zones?

Science.gov (United States)

2010-10-01

...-Rule Quiet Zone may be established by automatic approval and remain in effect, subject to § 222.51, if... Zone may be established by automatic approval and remain in effect, subject to § 222.51, if the Pre... 49 Transportation 4 2010-10-01 2010-10-01 false How does this rule affect Pre-Rule Quiet Zones and...

Forming engineers' sociocultural competence: Engineering ethics at tomsk polytechnic university

Science.gov (United States)

Galanina, E.; Dulzon, A.; Schwab, A.

2015-10-01

The aim of the present research is to discuss Tomsk Polytechnic University in respect of forming engineers’ sociocultural competence and teaching engineering ethics. Today international standards of training engineers cover efficient communication skills, ability to understand societal and environment context, professional and ethical responsibility. This article deals with the problem of contradiction between the need to form engineers’ sociocultural competence in Russian higher education institutions in order to meet the requirements of international accreditation organizations and the real capabilities of existing engineering curricula. We have described ethics teaching experience of TPU, studied the engineering master programs of TPU to see how the planned results are achieved. We have also given our recommendations to alter the structure of TPU educational curricula, which can also be applied in other higher education institutions.

Engineering grand challenges and the attributes of the global engineer

DEFF Research Database (Denmark)

Guerra, Aida; Ulseth, Ron; Jonhson, Bart

2017-01-01

Technology has been changing world in ways never imagined. The ever-evolving society and rapid development posed different demands and challenges to the engineering profession. Addressing these challenges means to re-vision and reform the ways we educate future engineers and the attributes need...... to be enhanced. This paper reports a literature review with aim to (1) understand the different stakeholders’ perspectives, namely students, educators, and employers, (2) understand the profile of the global engineer (i.e. knowledge, competences and skills), and (3) outline and discuss learning strategies....... As a result, the paper presents the main gaps in the existing knowledge, formulates research hypothesis, and proposes a research design for a follow up empirical study to investigate further the engineering grand challenges, the attributes needed to solve them, and the learning environments required....

Adaptive Gas Turbine Engine Control for Deterioration Compensation Due to Aging

Science.gov (United States)

Litt, Jonathan S.; Parker, Khary I.; Chatterjee, Santanu

2003-01-01

This paper presents an ad hoc adaptive, multivariable controller tuning rule that compensates for a thrust response variation in an engine whose performance has been degraded though use and wear. The upset appears when a large throttle transient is performed such that the engine controller switches from low-speed to high-speed mode. A relationship was observed between the level of engine degradation and the overshoot in engine temperature ratio, which was determined to cause the thrust response variation. This relationship was used to adapt the controller. The method is shown to work very well up to the operability limits of the engine. Additionally, since the level of degradation can be estimated from sensor data, it would be feasible to implement the adaptive control algorithm on-line.

Only half right: species with female-biased sexual size dimorphism consistently break Rensch's rule.

Directory of Open Access Journals (Sweden)

Thomas J Webb

2007-09-01

Full Text Available Most animal species display Sexual Size Dimorphism (SSD: males and females consistently attain different sizes, most frequently with females being larger than males. However the selective mechanisms driving patterns of SSD remain controversial. 'Rensch's rule' proposes a general scaling phenomenon for all taxa, whereby SSD increases with average body size when males are larger than females, and decreases with body size when females are larger than males. Rensch's rule appears to be general in the former case, but there is little evidence for the rule when females are larger then males.Using comprehensive data for 1291 species of birds across 30 families, we find strong support for Rensch's rule in families where males are typically larger than females, but no overall support for the rule in families with female-biased SSD. Reviewing previous studies of a broad range of taxa (arthropods, reptiles, fish and birds showing predominantly female-biased SSD, we conclude that Rensch's conjecture is the exception rather than the rule in such species.The absence of consistent scaling of SSD in taxa with female-biased SSD, the most prevalent direction of dimorphism, calls into question previous general evolutionary explanations for Rensch's rule. We propose that, unlike several other ecological scaling relationships, Rensch's rule does not exist as an independent scaling phenomenon.

Using the Chain Rule as the Key Link in Deriving the General Rules for Differentiation

Science.gov (United States)

Sprows, David

2011-01-01

The standard approach to the general rules for differentiation is to first derive the power, product, and quotient rules and then derive the chain rule. In this short article we give an approach to these rules which uses the chain rule as the main tool in deriving the power, product, and quotient rules in a manner which is more student-friendly…

Numerical Modelling of the Operation of a Novel Two Stroke V4 Engine

Directory of Open Access Journals (Sweden)

Albert Boretti

2017-02-01

Full Text Available The paper presents simulations of the operation of a novel two-stroke engine for road Super Sport motorcycles. Two-stroke engines were preferred to four-stroke engines in Grand Prix motorcycle racing until the start of the Moto GP era when new rules phased out the two-stroke engines. Reasons for the change were the poor fuel economy and significant pollutant emissions. The paper discusses the opportunity of a came back at least in road Super Sport motorcycles thanks to the recent advantages in direct injection and precise lubrication for two-stroke engines, plus the opportunity to use jet ignition, based on performance simulations.

The Goldwater Rule: Perspectives From, and Implications for, Psychological Science.

Science.gov (United States)

Lilienfeld, Scott O; Miller, Joshua D; Lynam, Donald R

2018-01-01

When, if ever, should psychological scientists be permitted to offer professional opinions concerning the mental health of public figures they have never directly examined? This contentious question, which attracted widespread public attention during the 1964 U.S. presidential election involving Barry Goldwater, received renewed scrutiny during and after the 2016 U.S. presidential campaign, when many mental health professionals raised pointed questions concerning the psychiatric status of Donald Trump. Although the Goldwater Rule prohibits psychiatrists from offering diagnostic opinions on individuals they have never examined, no comparable rule exists for psychologists. We contend that, owing largely to the Goldwater Rule's origins in psychiatry, a substantial body of psychological research on assessment and clinical judgment, including work on the questionable validity of unstructured interviews, the psychology of cognitive biases, and the validity of informant reports and of L (lifetime) data, has been overlooked in discussions of its merits. We conclude that although the Goldwater Rule may have been defensible several decades ago, it is outdated and premised on dubious scientific assumptions. We further contend that there are select cases in which psychological scientists with suitable expertise may harbor a "duty to inform," allowing them to offer informed opinions concerning public figures' mental health with appropriate caveats.

Rules, culture, and fitness.

Science.gov (United States)

Baum, W M

1995-01-01

Behavior analysis risks intellectual isolation unless it integrates its explanations with evolutionary theory. Rule-governed behavior is an example of a topic that requires an evolutionary perspective for a full understanding. A rule may be defined as a verbal discriminative stimulus produced by the behavior of a speaker under the stimulus control of a long-term contingency between the behavior and fitness. As a discriminative stimulus, the rule strengthens listener behavior that is reinforced in the short run by socially mediated contingencies, but which also enters into the long-term contingency that enhances the listener's fitness. The long-term contingency constitutes the global context for the speaker's giving the rule. When a rule is said to be "internalized," the listener's behavior has switched from short- to long-term control. The fitness-enhancing consequences of long-term contingencies are health, resources, relationships, or reproduction. This view ties rules both to evolutionary theory and to culture. Stating a rule is a cultural practice. The practice strengthens, with short-term reinforcement, behavior that usually enhances fitness in the long run. The practice evolves because of its effect on fitness. The standard definition of a rule as a verbal statement that points to a contingency fails to distinguish between a rule and a bargain ("If you'll do X, then I'll do Y"), which signifies only a single short-term contingency that provides mutual reinforcement for speaker and listener. In contrast, the giving and following of a rule ("Dress warmly; it's cold outside") can be understood only by reference also to a contingency providing long-term enhancement of the listener's fitness or the fitness of the listener's genes. Such a perspective may change the way both behavior analysts and evolutionary biologists think about rule-governed behavior.

The Historical Basis of Engineering Ethics

Science.gov (United States)

Furuya, Keiichi

There are different objects and motives between scientists and engineers. Science is to create new knowledge (episteme), while technology (techne) is to create new utility. Both types of social responsibility are required for engineer, because modern technology is tightly connected with science. The relationship between ethics for scientists and engineers is discussed as an evolution of ethical objects. A short history of engineering societies in U.S.A. and Japan are introduced with their ethical perspectives. As a conclusion, respect for fundamental rights for existence of those who stand in, with, and around engineers and their societies is needed for better engineering ethics.

Holographic heat engine within the framework of massive gravity

Science.gov (United States)

Mo, Jie-Xiong; Li, Gu-Qiang

2018-05-01

Heat engine models are constructed within the framework of massive gravity in this paper. For the four-dimensional charged black holes in massive gravity, it is shown that the existence of graviton mass improves the heat engine efficiency significantly. The situation is more complicated for the five-dimensional neutral black holes since the constant which corresponds to the third massive potential also contributes to the efficiency. It is also shown that the existence of graviton mass can improve the heat engine efficiency. Moreover, we probe how the massive gravity influences the behavior of the heat engine efficiency approaching the Carnot efficiency.

Consistence of Network Filtering Rules

Institute of Scientific and Technical Information of China (English)

SHE Kun; WU Yuancheng; HUANG Juncai; ZHOU Mingtian

2004-01-01

The inconsistence of firewall/VPN(Virtual Private Network) rule makes a huge maintainable cost.With development of Multinational Company,SOHO office,E-government the number of firewalls/VPN will increase rapidly.Rule table in stand-alone or network will be increased in geometric series accordingly.Checking the consistence of rule table manually is inadequate.A formal approach can define semantic consistence,make a theoretic foundation of intelligent management about rule tables.In this paper,a kind of formalization of host rules and network ones for auto rule-validation based on SET theory were proporsed and a rule validation scheme was defined.The analysis results show the superior performance of the methods and demonstrate its potential for the intelligent management based on rule tables.

Max-out-in pivot rule with Dantzig's safeguarding rule for the simplex method

International Nuclear Information System (INIS)

Tipawanna, Monsicha; Sinapiromsaran, Krung

2014-01-01

The simplex method is used to solve linear programming problem by improving the current basic feasible solution. It uses a pivot rule to guide the search in the feasible region. The pivot rule is used to select an entering index in simplex method. Nowadays, many pivot rule have been presented, but no pivot rule shows superior performance than other. Therefore, this is still an active research in linear programming. In this research, we present the max-out-in pivot rule with Dantzig's safeguarding for simplex method. This rule is based on maximum improvement of objective value of the current basic feasible point similar to the Dantzig's rule. We can illustrate by Klee and Minty problems that our rule outperforms that of Dantzig's rule by the number of iterations for solving linear programming problems

Engineering assessment of 105 K basin monorails

International Nuclear Information System (INIS)

Frier, W.A.

1995-01-01

The engineering assessment of the 105 K Basins monorails was performed to provide the engineering analysis to justify the existing basin north-south monorail capacity. The existing monorails have a capacity of 2400 lbs posted on the north-south monorails. The engineering assessment concluded that the monorail, hanger system, and trolleys all rate for a 2000 lb capacity. Based upon a 2,500 lb trolley load, the monorails, the hanger system, and the double trolley hoist system will rate for 2,500 lbs. The single trolley hoist system for handling the fuel canisters and the trolley systems used in the various transfer areas are limited by manufacturers to 2,000 lbs. Therefore, it is concluded from this engineering assessment that the 2,400 lb capacity posting for the north-south basin monorails is appropriate

WTO accepts rules limiting medicine exports to poor countries.

Science.gov (United States)

James, John S

2003-09-12

In a controversial decision on August 30, 2003, the World Trade Organization agreed to complex rules limiting the export of medications to developing countries. Reaction to the decision so far has shown a complete disconnect between trade delegates and the WTO, both of which praise the new rules as a humanitarian advance, and those working in treatment access in poor countries, who believe that they will effectively block treatment from reaching many who need it. We have prepared a background paper that analyzes this decision and its implications and offers the opinions of key figures on both sides of the debate. It is clear that the rules were largely written for and probably by the proprietary pharmaceutical industry, and imposed on the countries in the WTO mainly by the United States. The basic conflict is that this industry does not want the development of international trade in low-cost generic copies of its patented medicines--not even for poor countries, where little or no market exists. Yet millions of people die each year without medication for treatable conditions such as AIDS, and drug pricing remains one of several major obstacles to controlling global epidemics.

Generalize or personalize--do dogs transfer an acquired rule to novel situations and persons?

Directory of Open Access Journals (Sweden)

Anne Hertel

Full Text Available Recent studies have raised the question of whether dogs, like human infants, comprehend an established rule as generalizable, normative knowledge or rather as episodic information, existing only in the immediate situation. In the current study we tested whether dogs disobeyed a prohibition to take a treat (i in the presence of the communicator of the ban, (ii after a temporary absence of the communicator, and (iii in the presence of a novel person. Dogs disobeyed the rule significantly more often when the communicator left the room for a moment or when they were faced with a new person, than when she stayed present in the room. These results indicate that dogs "forget" a rule as soon as the immediate human context becomes disrupted.

A survey of the existing international legal rules on the dumping of radioactive waste into the sea

International Nuclear Information System (INIS)

Cornelis, J.C.

All nuclear activities generate radioactive wastes and, in the context of the problems raised by such wastes, the author analyses the international rules regulating their safe disposal into the sea and the motives underlying their elaboration. The review therefore covers the London Convention on the Prevention of Marine Pollution by Dumping of Waste and Other Matter, together with the IAEA provisional definition and recommendations in this respect, and the recently adopted OECD Multilateral Consultation and Surveillance Mechanism for Sea Dumping of Radioactive Waste. It is emphasized that while the London Convention deals with a wide range of products, the OECD Mechanism deals solely with radioactive waste. Finally, consideration is given to whether the Paris Convention and the Euratom Treaty may be of relevance in this field. (NEA) [fr

Criterion learning in rule-based categorization: simulation of neural mechanism and new data.

Science.gov (United States)

Helie, Sebastien; Ell, Shawn W; Filoteo, J Vincent; Maddox, W Todd

2015-04-01

In perceptual categorization, rule selection consists of selecting one or several stimulus-dimensions to be used to categorize the stimuli (e.g., categorize lines according to their length). Once a rule has been selected, criterion learning consists of defining how stimuli will be grouped using the selected dimension(s) (e.g., if the selected rule is line length, define 'long' and 'short'). Very little is known about the neuroscience of criterion learning, and most existing computational models do not provide a biological mechanism for this process. In this article, we introduce a new model of rule learning called Heterosynaptic Inhibitory Criterion Learning (HICL). HICL includes a biologically-based explanation of criterion learning, and we use new category-learning data to test key aspects of the model. In HICL, rule selective cells in prefrontal cortex modulate stimulus-response associations using pre-synaptic inhibition. Criterion learning is implemented by a new type of heterosynaptic error-driven Hebbian learning at inhibitory synapses that uses feedback to drive cell activation above/below thresholds representing ionic gating mechanisms. The model is used to account for new human categorization data from two experiments showing that: (1) changing rule criterion on a given dimension is easier if irrelevant dimensions are also changing (Experiment 1), and (2) showing that changing the relevant rule dimension and learning a new criterion is more difficult, but also facilitated by a change in the irrelevant dimension (Experiment 2). We conclude with a discussion of some of HICL's implications for future research on rule learning. Copyright © 2015 Elsevier Inc. All rights reserved.

78 FR 69167 - Self-Regulatory Organizations; ICE Clear Credit LLC; Order Approving Proposed Rule Change To...

Science.gov (United States)

2013-11-18

..., the Bolivian Republic of Venezuela, the Argentine Republic, the Republic of Turkey and the Russian... transactions, and ICC's proposal, in combination with its existing rules, policies, and procedures for clearing...

Do Group Decision Rules Affect Trust? A Laboratory Experiment on Group Decision Rules and Trust

DEFF Research Database (Denmark)

Nielsen, Julie Hassing

2016-01-01

Enhanced participation has been prescribed as the way forward for improving democratic decision making while generating positive attributes like trust. Yet we do not know the extent to which rules affect the outcome of decision making. This article investigates how different group decision rules......-hierarchical decision-making procedures enhance trust vis-à-vis other more hierarchical decision-making procedures....... affect group trust by testing three ideal types of decision rules (i.e., a Unilateral rule, a Representative rule and a 'Non-rule') in a laboratory experiment. The article shows significant differences between the three decision rules on trust after deliberation. Interestingly, however, it finds...

Verification of business rules programs

CERN Document Server

Silva, Bruno Berstel-Da

2013-01-01

Rules represent a simplified means of programming, congruent with our understanding of human brain constructs. With the advent of business rules management systems, it has been possible to introduce rule-based programming to nonprogrammers, allowing them to map expert intent into code in applications such as fraud detection, financial transactions, healthcare, retail, and marketing. However, a remaining concern is the quality, safety, and reliability of the resulting programs.  This book is on business rules programs, that is, rule programs as handled in business rules management systems. Its

Rules for biocatalyst and reaction engineering to implement effective, NAD(P)H-dependent, whole cell bioreductions

DEFF Research Database (Denmark)

Kratzer, Regina; Woodley, John; Nidetzky, Bernd

2015-01-01

recycling mode and reaction conditions represent design options that strongly affect bioreduction efficiency. In this paper, each option was critically scrutinized and decision rules formulated based on well-described literature examples. The development chain was visualized as a decision-tree that can...

GPR applications in Civil Engineering in Spain - state-of-the-art

Science.gov (United States)

Pérez Gracia, Vega; Solla, Mercedes; Santos-Assunçao, Sonia; Lorenzo, Henrique

2014-05-01

GPR was introduced in Spain in 1990, and the first significant work was the PhD thesis of H. Lorenzo in 1994. Due to its versatile applicability, the employ has been increased and actually, GPR is extensively used in detection of pipes, wiring and urban services mainly. During the last years, this method was also widely utilized in the detection of graves from the civil war and in forensic studies, with irregular results. It was also commonly applied in archaeology. Actually exists more than 20 private companies offering geotechnical services by means of GPR. Also, several public institutions as Universities and Research Institutes base part of their research in GPR or in GPR applications. Notwithstanding, no training courses of specific formation on GPR is offered, but in several doctorate programs it is possible to work with GPR. Also, in many schools, GPR is part of the geophysical formation of graduate students. However, no national guidelines and rules exist, and each company defines the investigation protocols. Nevertheless, one of the aims of the Comisión Española de Geodesia y Geofísica (Spanish Committee for Geodesy and Geophysics) is to define guidelines for the GPR studies. Probably, the existence of national guidelines or perhaps European guidelines could be the most effective way to promote the responsible use of GPR in different domains. On the other hand, perhaps recommendations on the use of combined methodologies could be a practical way to persuade in the application of geophysical non-destructive technologies. The CEDEX, Centro de Estudios y Experimentación de Obras Públicas (Center for Studies and Experimentation in Civil Engineering), which is a civil engineering research agency in Spain, offers different test sites to calibrate and evaluate the method. It is an autonomous organization, organically ascribed at present to the Ministry of Fomento, and functionally ascribed to the Ministries of Fomento and Medioambiente of Spain, giving

Effect of engine parameters and type of gaseous fuel on the performance of dual-fuel gas diesel engines. A critical review

Energy Technology Data Exchange (ETDEWEB)

Sahoo, B.B. [Centre for Energy, Indian Institute of Technology, Guwahati 781039 (India); Sahoo, N.; Saha, U.K. [Department of Mechanical Engineering, Indian Institute of Technology, Guwahati 781039 (India)

2009-08-15

Petroleum resources are finite and, therefore, search for their alternative non-petroleum fuels for internal combustion engines is continuing all over the world. Moreover gases emitted by petroleum fuel driven vehicles have an adverse effect on the environment and human health. There is universal acceptance of the need to reduce such emissions. Towards this, scientists have proposed various solutions for diesel engines, one of which is the use of gaseous fuels as a supplement for liquid diesel fuel. These engines, which use conventional diesel fuel and gaseous fuel, are referred to as 'dual-fuel engines'. Natural gas and bio-derived gas appear more attractive alternative fuels for dual-fuel engines in view of their friendly environmental nature. In the gas-fumigated dual-fuel engine, the primary fuel is mixed outside the cylinder before it is inducted into the cylinder. A pilot quantity of liquid fuel is injected towards the end of the compression stroke to initiate combustion. When considering a gaseous fuel for use in existing diesel engines, a number of issues which include, the effects of engine operating and design parameters, and type of gaseous fuel, on the performance of the dual-fuel engines, are important. This paper reviews the research on above issues carried out by various scientists in different diesel engines. This paper touches upon performance, combustion and emission characteristics of dual-fuel engines which use natural gas, biogas, producer gas, methane, liquefied petroleum gas, propane, etc. as gaseous fuel. It reveals that 'dual-fuel concept' is a promising technique for controlling both NO{sub x} and soot emissions even on existing diesel engine. But, HC, CO emissions and 'bsfc' are higher for part load gas diesel engine operations. Thermal efficiency of dual-fuel engines improve either with increased engine speed, or with advanced injection timings, or with increased amount of pilot fuel. The ignition

Tests for the existence of black holes through gravitational wave echoes

Science.gov (United States)

Cardoso, Vitor; Pani, Paolo

2017-09-01

The existence of black holes and spacetime singularities is a fundamental issue in science. Despite this, observations supporting their existence are scarce, and their interpretation is unclear. In this Perspective we outline the case for black holes that has been made over the past few decades, and provide an overview of how well observations adjust to this paradigm. Unsurprisingly, we conclude that observational proof for black holes is, by definition, impossible to obtain. However, just like Popper's black swan, alternatives can be ruled out or confirmed to exist with a single observation. These observations are within reach. In the coming years and decades, we will enter an era of precision gravitational-wave physics with more sensitive detectors. Just as accelerators have required larger and larger energies to probe smaller and smaller scales, more sensitive gravitational-wave detectors will probe regions closer and closer to the horizon, potentially reaching Planck scales and beyond. What may be there, lurking?

QCD effects to Bjorken unpolarized sum rule for νN deep-inelastic scattering

International Nuclear Information System (INIS)

Alekhin, S I; Kataev, A L

2003-01-01

The possibility of the first measurement of Bjorken unpolarized sum rule for F 1 structure function of νN deep-inelastic scattering at neutrino factories is commented. The brief summary of various theoretical contributions to this sum rule is given. Using the next-to-leading set of parton distributions functions, we simulate the expected Q 2 -behaviour and emphasize that its measurement can allow us to determine the value of the QCD strong coupling constant α s with reasonable theoretical uncertainty, dominated by the ambiguity in the existing estimates of the twist-4 non-perturbative 1/Q 2 -effect

Methodology for safety evaluation of existing timber elements

OpenAIRE

Sousa, Hélder S.

2013-01-01

Tese de doutoramento em Engenharia Civil The past decades have seen a renewed interest in timber research related topics. As instance, timber engineering is not only confined to the design of new construction with innovative wood based products, but also an increasing awareness for the preservation of existing timber structures is visible in nowadays society. Therefore, arises the need for a better understanding of timber performance as a construction material aiming at a bette...

Convention on nuclear safety. Rules of procedure and financial rules

International Nuclear Information System (INIS)

1999-01-01

The document is the first revision of the Rules of Procedures and Financial Rules that apply mutatis mutandis to any meetings of the Contracting Parties to the Convention on Nuclear Safety (INFCIRC/573), convened in accordance with the Chapter 3 of the Convention

Convention on Nuclear Safety. Rules of procedure and financial rules

International Nuclear Information System (INIS)

2002-01-01

The document is the second revision of the Rules of Procedures and Financial Rules that apply mutatis mutandis to any meetings of the Contracting Parties to the Convention on Nuclear Safety (INFCIRC/573), convened in accordance with the Chapter 3 of the Convention

A concept for a bachelor program in electrical engineering

DEFF Research Database (Denmark)

Niemann, Hans Henrik

2011-01-01

The main concept for the Bachelor of Science in Engineering (BScE) in electrical engineering at Technical University of Denmark (DTU) will be described in this paper. A new curriculum was introduced from the start of the autumn semester in 2010. The curriculum was the result of more than one year...... of work with first description of competences followed by a more detailed description of the single main areas. Finally, the new study plan was implemented through a number of courses satisfying some general rules for bachelor study plans.......The main concept for the Bachelor of Science in Engineering (BScE) in electrical engineering at Technical University of Denmark (DTU) will be described in this paper. A new curriculum was introduced from the start of the autumn semester in 2010. The curriculum was the result of more than one year...

40 CFR 63.481 - Compliance dates and relationship of this subpart to existing applicable rules.

Science.gov (United States)

2010-07-01

... changes to the existing barrier fluid system; or (iv) The compressor will be modified to permit connecting the compressor to a fuel gas system or closed vent system, or be modified so that emissions from the... are required to connect to a closed-vent or recovery system. (5) Compliance with the surge control...

Faculty of Nuclear and Physical Engineering, Czech Technical University, Prague - 25 years of existence

International Nuclear Information System (INIS)

Kraus, I.; Marsak, Z.

1980-03-01

A collection is presented of articles on the occasion of the 25th anniversary fo the Faculty of Nuclear Science and Physical Engineering. The list is shown of the departments including their subject matter and the teaching, socio-political and research and scientific activities of the Faculty are described. (M.S.)

Development of rules for design at elevated temperatures (the RAMSES-group)

International Nuclear Information System (INIS)

Schaller, K.H.; Jakubowicz, H.; Petrequin, P.; Roche, R.; Weisz, M.

1977-01-01

The design of structures of liquid-metal-cooled fast breeder reactors of the pool-type in France has to correspond to the national regulations and takes into account the rules adopted by other countries, essentially the U.S. ASME-CODE Ill and the CODE CASE 1592 for elevated temperatures. The existing rules need complements or modifications for the following reasons: the materials employed are not covered exactly by the specifications; the properties given are not necessarily equivalent; the simplified rules (normally on the base of an elastic calculation) are often penalizing as are not valid for the type of loads considered (an example are the ratcheting rules); the use of some rules, for example the creep-fatigue interaction tends to overestimate the safety-coefficients really obtained (long tensile-hold-time followed by a transient in compression is the best example for the austenitic-type steels); the environmental effects are excluded. The French Atomic Energy Commission has founded, for the reasons mentioned above, a working group, the RAMSES-GROUP (Regles d'Analyse Mecanique des Structures), in order to codify the information needed, taking into account the experience obtained in more than ten years of fast-reactor operation. The group, including experts of three departments (DMECN, DEMT, DRNR) has adopted a number of recommendations; projects of recommendations and basic experimental work are on going. The final scope is to obtain a coherent network of rules for the design of structures in the elevated-temperature range. The already adopted recommendations codify the characteristics of the materials mainly employed in the primary system ready for use in finite element computer programs and the procedures to follow for analysis. As inelastic stress-and strain-evaluations have become possible economically by use of programs of the CEASEMT-SYSTEM, the problem of simplified rules based on elastic computations can be very often avoided

The Rule of Law against the Rule of Greed: Edmund Burke against the East India Company

Directory of Open Access Journals (Sweden)

Jakob Fortunat Stagl

2012-01-01

Full Text Available At the end of the 18th century Bengal suddenly came under the rule of the East India Company. The former trading company had become the sovereign, first, of a country the size of France, and eventually of the whole Indian subcontinent. The Company was not controlled by any positive law, be it Indian, British or international. As a consequence, the Company’s individual and corporate greed reigned supreme, with the most dire consequences for the native Indian population. The Indian question aroused the interest of Edmund Burke. He saw in India a metaphor for his native Ireland and was suspicious of the corruption of British politics by the money and influence that the Company’s men had gained in India. He therefore made it the aim of his life to fight the Company’s unrestrained avarice by fostering an impeachment trial against Warren Hastings, the first Governor General of Bengal. In order to get Hastings convicted it was necessary to show that he had infringed the law. But which law should Hastings’ judges apply? He resorted to Natural Law and Roman Law. Thence he took the maxim »Eundem negotiatorem et dominum«, that is to say, commerce which aims at profit, and government which aims at the welfare of the population, are irreconcilable. Though after many years Hastings was acquitted, Burke contributed by this trial to civilising British rule in India. Burke’s stance has recently been criticised by the post-colonial school: He should have pleaded for the British to quit India rather than improving their rule and thereby prolonging its existence.

Methods for automated semantic definition of manufacturing structures (mBOM) in mechanical engineering companies

Science.gov (United States)

Stekolschik, Alexander, Prof.

2017-10-01

The bill of materials (BOM), which involves all parts and assemblies of the product, is the core of any mechanical or electronic product. The flexible and integrated management of engineering (Engineering Bill of Materials [eBOM]) and manufacturing (Manufacturing Bill of Materials [mBOM]) structures is the key to the creation of modern products in mechanical engineering companies. This paper presents a method framework for the creation and control of e- and, especially, mBOM. The requirements, resulting from the process of differentiation between companies that produce serialized or engineered-to-order products, are considered in the analysis phase. The main part of the paper describes different approaches to fully or partly automated creation of mBOM. The first approach is the definition of part selection rules in the generic mBOM templates. The mBOM can be derived from the eBOM for partly standardized products by using this method. Another approach is the simultaneous use of semantic rules, options, and parameters in both structures. The implementation of the method framework (selection of use cases) in a standard product lifecycle management (PLM) system is part of the research.

International negotiations in the foundry engineering

Directory of Open Access Journals (Sweden)

L. Wojtynek

2008-04-01

Full Text Available The aim of this paper is to introduce the essence of negotiations in general, which could find it’s application in foundry engineering. The paper is the result of long cooperation of the authors with foundry engineering and their participation in negotiations between the domestic and foreign companies. In this paper the essence and the rules of negotiations have been introduced. It presents also the skills and abilities of the negotiators. The cycle of negotiations and the following stages of negotiations have been also described. The authors have presented the characteristics of negotiations led by the partners from different parts of the world with particular emphasize on Asian and European countries as with these partners the negotiations in Polish foundries are mainly led.

Reviewing reactor engineering and fuel handling

International Nuclear Information System (INIS)

1991-12-01

Experience has shown that the better operating nuclear power plants have well defined and effectively administered policies and procedures for governing reactor engineering and fuel handling (RE and FH) activities. This document provides supplementary guidance to OSART experts for evaluating the RE and FH programmes and activities at a nuclear power plant and assessing their effectiveness and adequacy. It is in no way intended to conflict with existing regulations and rules, but rather to exemplify those characteristics and features that are desirable for an effective, well structured RE and FH programme. This supplementary guidance addresses those aspects of RE and FH activities that are required in order to ensure optimum core operation for a nuclear reactor without compromising the limits imposed by the design, safety considerations of the nuclear fuel. In the context of this document, reactor engineering refers to those activities associated with in-core fuel and reactivity management, whereas fuel handling refers to the movement, storage, control and accountability of unirradiated and irradiated fuel. The document comprises five main sections and several appendices. In Section 2 of this guide, the essential aspects of an effective RE and FH programme are discussed. In Section 3, the various types of documents and reference materials needed for the preparatory work and investigation are listed. In Section 4, specific guidelines for investigation of RE and FH programmes are presented. In Section 5, the essential attributes of an excellent RE and FH programme are listed. The supplementary guidance is concluded with a series of appendices exemplifying the various qualities and attributes of a sound, well defined RE and FH programme

Computer aided seismic and fire retrofitting analysis of existing high rise reinforced concrete buildings

CERN Document Server

Hussain, Raja Rizwan; Hasan, Saeed

2016-01-01

This book details the analysis and design of high rise buildings for gravity and seismic analysis. It provides the knowledge structural engineers need to retrofit existing structures in order to meet safety requirements and better prevent potential damage from such disasters as earthquakes and fires. Coverage includes actual case studies of existing buildings, reviews of current knowledge for damages and their mitigation, protective design technologies, and analytical and computational techniques. This monograph also provides an experimental investigation on the properties of fiber reinforced concrete that consists of natural fibres like coconut coir and also steel fibres that are used for comparison in both Normal Strength Concrete (NSC) and High Strength Concrete (HSC). In addition, the authors examine the use of various repair techniques for damaged high rise buildings. The book will help upcoming structural design engineers learn the computer aided analysis and design of real existing high rise buildings ...

Legal bases of safety regulations in electrical engineering

Energy Technology Data Exchange (ETDEWEB)

Jeiter, W

1981-12-01

Apart from the governmental regulations the rule for the prevention of accidents 'Electric plants and equipment' must be observed in order to protect the insurants. Actually, all these regulations do not contain any independent instructions. They rather utilize the VDE regulations and refer to them. The laws of electrical safety engineering are strongly influenced by harmonization efforts particularly within the European Communitties.

Expert System Approach For Generating And Evaluating Engine Design Alternatives

Science.gov (United States)

Shen, Stewart N. T.; Chew, Meng-Sang; Issa, Ghassan F.

1989-03-01

Artificial intelligence is becoming an increasingly important subject of study for computer scientists, engineering designers, as well as professionals in other fields. Even though AI technology is a relatively new discipline, many of its concepts have already found practical applications. Expert systems, in particular, have made significant contributions to technologies in such fields as business, medicine, engineering design, chemistry, and particle physics. This paper describes an expert system developed to aid the mechanical designer with the preliminary design of variable-stroke internal-combustion engines. The expert system accomplished its task by generating and evaluating a large number of design alternatives represented in the form of graphs. Through the application of structural and design rules directly to the graphs, optimal and near optimal preliminary design configurations of engines are deduced.

The IAHR project CCHE-Climate Change impact on the Hydrological cycle, water management and Engineering: an overview and preliminary results

Science.gov (United States)

Ranzi, Roberto; Kojiri, T.; Mynett, A.; Barontini, S.; van de Giesen, N.; Kolokytha, E.; Ngo, L. A.; Oreamuno, R.; Renard, B.; Sighomnou, D.; Vizina, A.

2010-05-01

IAHR, the International Association for Hydro-Environment Engineering and Research launched a research Project called Climate Change impact on the Hydrological cycle, water management and Engineering (IAHR CCHE Project). It was motivated by the fact that, although it is now well accepted that, in the light of the recent IPCC reports the vast majority of members of the scientific community are convinced that the climate is changing or at least will experience a significant fluctuation already during the current century, it is perceived that some hydrologists, water experts and hydraulic engineers are not yet ready to incorporate climate change scenarios in their designs for such projects as: - flood protection and river training, - dam rehabilitation, - water resources management under water scarcity and changes in the hydrological regimes. The objective of the project is to encourage a close co-operation between the scientific and engineering communities in taking appropriate and timely action in response to the impact of climate change on the hydrological regime and on water resource projects. The project aims at reporting on (a) the current state of knowledge as regards the impact of projected climate change on the hydrological regime in different regions of the world, where these regions are defined not just in geographic terms but also on the basis of their level of economic and water resources development; (b) the extent to which these impacts are recognized and taken into account by national water authorities, engineering organizations and other regulating bodies in setting their standard practices and procedures for the planning, design and operation of water works. These adaptation measures will include both "hard" responses, such as the construction or enlargement of engineering structures, and "soft" responses, such as changes in legislation or the operating rules of existing structures. An overview of the project and preliminary results extracted from of

77 FR 1019 - Renewable Energy Alternate Uses of Existing Facilities on the Outer Continental Shelf-Acquire a...

Science.gov (United States)

2012-01-09

...-0045] RIN 1010-AD79 Renewable Energy Alternate Uses of Existing Facilities on the Outer Continental... rule related to acquiring a lease non-competitively for offshore renewable energy projects. DATES... or Timothy Redding, Renewable Energy, BOEM, at (703) 787-1219 or email [email protected

The Rule of Law and the U.S. Quest for Security in El Salvador

Science.gov (United States)

2007-03-12

separation of powers, both of which significantly advanced the importance of the rule of law in Western political philosophy . The Declaration of Independence...and civil libertarians on the left, and perhaps helped exacerbate existing class tensions.180 More importantly, the inability of democratically

The role of traffic rules.

NARCIS (Netherlands)

Noordzij, P.C.

1988-01-01

Experienced road users seem to have their own set of traffic rules (including rules about when to violate the official rules). The number of violations is enormous, causing great concern for the authorities. The situation could be improved by separating a set of rules with the aim of deterring road

The Case for Distributed Engine Control in Turbo-Shaft Engine Systems

Science.gov (United States)

Culley, Dennis E.; Paluszewski, Paul J.; Storey, William; Smith, Bert J.

2009-01-01

The turbo-shaft engine is an important propulsion system used to power vehicles on land, sea, and in the air. As the power plant for many high performance helicopters, the characteristics of the engine and control are critical to proper vehicle operation as well as being the main determinant to overall vehicle performance. When applied to vertical flight, important distinctions exist in the turbo-shaft engine control system due to the high degree of dynamic coupling between the engine and airframe and the affect on vehicle handling characteristics. In this study, the impact of engine control system architecture is explored relative to engine performance, weight, reliability, safety, and overall cost. Comparison of the impact of architecture on these metrics is investigated as the control system is modified from a legacy centralized structure to a more distributed configuration. A composite strawman system which is typical of turbo-shaft engines in the 1000 to 2000 hp class is described and used for comparison. The overall benefits of these changes to control system architecture are assessed. The availability of supporting technologies to achieve this evolution is also discussed.

Techniques and implementation of the embedded rule-based expert system using Ada

Science.gov (United States)

Liberman, Eugene M.; Jones, Robert E.

1991-01-01

Ada is becoming an increasingly popular programming language for large Government-funded software projects. Ada with its portability, transportability, and maintainability lends itself well to today's complex programming environment. In addition, expert systems have also assured a growing role in providing human-like reasoning capability and expertise for computer systems. The integration of expert system technology with Ada programming language, specifically a rule-based expert system using an ART-Ada (Automated Reasoning Tool for Ada) system shell is discussed. The NASA Lewis Research Center was chosen as a beta test site for ART-Ada. The test was conducted by implementing the existing Autonomous Power EXpert System (APEX), a Lisp-base power expert system, in ART-Ada. Three components, the rule-based expert system, a graphics user interface, and communications software make up SMART-Ada (Systems fault Management with ART-Ada). The main objective, to conduct a beta test on the ART-Ada rule-based expert system shell, was achieved. The system is operational. New Ada tools will assist in future successful projects. ART-Ada is one such tool and is a viable alternative to the straight Ada code when an application requires a rule-based or knowledge-based approach.

Approach to design neural cryptography: a generalized architecture and a heuristic rule.

Science.gov (United States)

Mu, Nankun; Liao, Xiaofeng; Huang, Tingwen

2013-06-01

Neural cryptography, a type of public key exchange protocol, is widely considered as an effective method for sharing a common secret key between two neural networks on public channels. How to design neural cryptography remains a great challenge. In this paper, in order to provide an approach to solve this challenge, a generalized network architecture and a significant heuristic rule are designed. The proposed generic framework is named as tree state classification machine (TSCM), which extends and unifies the existing structures, i.e., tree parity machine (TPM) and tree committee machine (TCM). Furthermore, we carefully study and find that the heuristic rule can improve the security of TSCM-based neural cryptography. Therefore, TSCM and the heuristic rule can guide us to designing a great deal of effective neural cryptography candidates, in which it is possible to achieve the more secure instances. Significantly, in the light of TSCM and the heuristic rule, we further expound that our designed neural cryptography outperforms TPM (the most secure model at present) on security. Finally, a series of numerical simulation experiments are provided to verify validity and applicability of our results.

Experimental Technique of Titanium Fire in Aero-engine

Directory of Open Access Journals (Sweden)

MI Guangbao

2016-06-01

Full Text Available Titanium fire is the typical catastrophic fault in the aero-engine. Aiming at the urgent demand for experimental technique of titanium fire from advanced high thrust-weight ratio aero-engine, the combustion technology and theory of titanium alloy based on friction oxygen concentration method (FOC were systematically studied. The evaluation method of fireproof property and the friction ignition model were built, and the fireproof mechanism was illustrated. By generalizing recent progress in experimental technique of titanium fire from three levels, including evolutionary rule, mechanism and prevention and control technology, the ideas and directions of experimental technique associated with the application research of titanium fire in the future were proposed, namely overall evaluation of fireproof property close to air flow environment of the aero-engine, prediction model of fireproof property and experimental verification of fireproof technique under the air flow environment of aero-engine. It is necessary to establish the prevention system of titanium fire in aero-engine, which contributes to the realization of "full titanium" in compressor and to the increase of high thrust-weight ratio.

Environmental education in Saudi general environment system - an engineering perspective

International Nuclear Information System (INIS)

Abdulrahman Salih Hariri

2006-01-01

The Saudi Cabinet of Ministers approved the Saudi General Environment System (SGES) in 2001. This approval is considered a step forward towards preserving the environment in Saudi Arabia. One of the targets of this system is to make environmental planning as an un-replaceable part of every comprehensive development planning in all industrial, agricultural, and architectural sectors. Achieving such a target requires a specialized labor force. Therefore, College of Engineering should act positively and actively in disseminating environmental awareness among engineers since they play a major rule in development projects. A degree in environmental engineering is a must at present, which is not available yet at any university in Saudi Arabia. Details of a B. Sc degree in environmental engineering offered by two universities in USA, are discussed. The syllabus of a degree in environment engineering adapted for the Saudi environment and culture is outlined

Local control stations: Human engineering issues and insights

International Nuclear Information System (INIS)

Brown, W.S.; Higgins, J.C.; O'Hara, J.M.

1994-09-01

The objective of this research project was to evaluate current human engineering at local control stations (LCSs) in nuclear power plants, and to identify good human engineering practices relevant to the design of these operator interfaces. General literature and reports of operating experience were reviewed to determine the extent and type of human engineering deficiencies at LCSs in nuclear power plants. In-plant assessments were made of human engineering at single-function as well as multifunction LCSs. Besides confirming the existence of human engineering deficiencies at LCSs, the in-plant assessments provided information about the human engineering upgrades that have been made at nuclear power plants. Upgrades were typically the result of any of three influences regulatory activity, broad industry initiatives such as INPO, and specific in-plant programs (e.g. activities related to training). It is concluded that the quality of LCSs is quite variable and might be improved if there were greater awareness of good practices and existing human engineering guidance relevant to these operator interfaces, which is available from a variety of sources. To make such human engineering guidance more readily accessible, guidelines were compiled from such sources and included in the report as an appendix

Life fraction rules

International Nuclear Information System (INIS)

Maile, K.

1989-01-01

Evaluations for lifetime estimation of high temperature loaded HTR-components under creep fatigue load had been performed. The evaluations were carried out on the basis of experimental data of strain controlled fatigue tests with respectively without hold times performed on material NiCr 22 Co 12 Mo (Inconel 617). Life prediction was made by means of the linear damage accumulation rule. Due to the high temperatures no realistic estimates of creep damage can be obtained with this rule. Therefore the rule was modified. The modifications consist in a different analysis of the relaxation curve including different calculation of the creep damage estimate resp. in an extended rule, taking into consideration the interaction between creep and fatigue. In order to reach a better result transparency and to reduce data set dependent result scattering a round robin with a given data set was carried out. The round robin yielded that for a given test temperature of T = 950deg C realistic estimate of damage can be obtained with each modification. Furthermore a reduction of resulting scatterbands in the interaction diagram can be observed, i.e. the practicability of the rule has been increased. (orig.)

Downdraught assessment during design : experimental and numerical evaluation of a rule of thumb

NARCIS (Netherlands)

Schellen, L.; Timmers, S.; Loomans, M.G.L.C.; Nelissen, E.S.M.; Hensen, J.L.M.; Marken Lichtenbelt, van W.D.

2012-01-01

Large glass façades are popular architectural features in building design nowadays. However, these façades can result in interior downdraught during periods with low outdoor temperatures. A rule of thumb exists to assess the downdraught risk, based on window height and window temperature [1]. In

Analysis of Rules for Islamic Inheritance Law in Indonesia Using Hybrid Rule Based Learning

Science.gov (United States)

Khosyi'ah, S.; Irfan, M.; Maylawati, D. S.; Mukhlas, O. S.

2018-01-01

Along with the development of human civilization in Indonesia, the changes and reform of Islamic inheritance law so as to conform to the conditions and culture cannot be denied. The distribution of inheritance in Indonesia can be done automatically by storing the rule of Islamic inheritance law in the expert system. In this study, we analyze the knowledge of experts in Islamic inheritance in Indonesia and represent it in the form of rules using rule-based Forward Chaining (FC) and Davis-Putman-Logemann-Loveland (DPLL) algorithms. By hybridizing FC and DPLL algorithms, the rules of Islamic inheritance law in Indonesia are clearly defined and measured. The rules were conceptually validated by some experts in Islamic laws and informatics. The results revealed that generally all rules were ready for use in an expert system.

Seven Golden Rules for heuristic filtering of molecular formulas obtained by accurate mass spectrometry

Directory of Open Access Journals (Sweden)

Fiehn Oliver

2007-03-01

Full Text Available Abstract Background Structure elucidation of unknown small molecules by mass spectrometry is a challenge despite advances in instrumentation. The first crucial step is to obtain correct elemental compositions. In order to automatically constrain the thousands of possible candidate structures, rules need to be developed to select the most likely and chemically correct molecular formulas. Results An algorithm for filtering molecular formulas is derived from seven heuristic rules: (1 restrictions for the number of elements, (2 LEWIS and SENIOR chemical rules, (3 isotopic patterns, (4 hydrogen/carbon ratios, (5 element ratio of nitrogen, oxygen, phosphor, and sulphur versus carbon, (6 element ratio probabilities and (7 presence of trimethylsilylated compounds. Formulas are ranked according to their isotopic patterns and subsequently constrained by presence in public chemical databases. The seven rules were developed on 68,237 existing molecular formulas and were validated in four experiments. First, 432,968 formulas covering five million PubChem database entries were checked for consistency. Only 0.6% of these compounds did not pass all rules. Next, the rules were shown to effectively reducing the complement all eight billion theoretically possible C, H, N, S, O, P-formulas up to 2000 Da to only 623 million most probable elemental compositions. Thirdly 6,000 pharmaceutical, toxic and natural compounds were selected from DrugBank, TSCA and DNP databases. The correct formulas were retrieved as top hit at 80–99% probability when assuming data acquisition with complete resolution of unique compounds and 5% absolute isotope ratio deviation and 3 ppm mass accuracy. Last, some exemplary compounds were analyzed by Fourier transform ion cyclotron resonance mass spectrometry and by gas chromatography-time of flight mass spectrometry. In each case, the correct formula was ranked as top hit when combining the seven rules with database queries. Conclusion The

A Better Budget Rule

Science.gov (United States)

Dothan, Michael; Thompson, Fred

2009-01-01

Debt limits, interest coverage ratios, one-off balanced budget requirements, pay-as-you-go rules, and tax and expenditure limits are among the most important fiscal rules for constraining intertemporal transfers. There is considerable evidence that the least costly and most effective of such rules are those that focus directly on the rate of…

Systems Security Engineering Capability Maturity Model SSE-CMM Model Description Document

National Research Council Canada - National Science Library

1999-01-01

The Systems Security Engineering Capability Maturity Model (SSE-CMM) describes the essential characteristics of an organization's security engineering process that must exist to ensure good security engineering...

Linear parameter-varying control for engineering applications

CERN Document Server

White, Andrew P; Choi, Jongeun

2013-01-01

The objective of this brief is to carefully illustrate a procedure of applying linear parameter-varying (LPV) control to a class of dynamic systems via a systematic synthesis of gain-scheduling controllers with guaranteed stability and performance. The existing LPV control theories rely on the use of either H-infinity or H2 norm to specify the performance of the LPV system.  The challenge that arises with LPV control for engineers is twofold. First, there is no systematic procedure for applying existing LPV control system theory to solve practical engineering problems from modeling to control design. Second, there exists no LPV control synthesis theory to design LPV controllers with hard constraints. For example, physical systems usually have hard constraints on their required performance outputs along with their sensors and actuators. Furthermore, the H-infinity and H2 performance criteria cannot provide hard constraints on system outputs. As a result, engineers in industry could find it difficult to utiliz...

Communicating rules in recreation areas

Science.gov (United States)

Terence L. Ross; George H. Moeller

1974-01-01

Five hundred fifty-eight campers were surveyed on the Allegheny National Forest to determine their knowledge of rules governing recreation behavior. Most of them were uninformed about the rules. Results of the study suggest that previous camping experience, age, camping style, and residence significantly affect knowledge of rules. Campers who received rule brochures or...

HPT Clearance Control: Intelligent Engine Systems-Phase 1

Science.gov (United States)

2005-01-01

The following work has been completed to satisfy the Phase I Deliverables for the "HPT Clearance Control" project under NASA GRC's "Intelligent Engine Systems" program: (1) Need for the development of an advanced HPT ACC system has been very clearly laid out, (2) Several existing and potential clearance control systems have been reviewed, (3) A scorecard has been developed to document the system, performance (fuel burn, range, payload, etc.), thermal, and mechanical characteristics of the existing clearance control systems, (4) Engine size and flight cycle selection for the advanced HPT ACC system has been reviewed with "large engine"/"long range mission" combination showing the most benefit, (5) A scoring criteria has been developed to tie together performance parameters for an objective, data driven comparison of competing systems, and (6) The existing HPT ACC systems have been scored based on this scoring system.

Air-fuel ratio control of a lean burn Si engine using fuzzy self tuning method

International Nuclear Information System (INIS)

Akhlaghi, M.; Bakhtiari Nejad, F.; Azadi, S.

2000-01-01

Reducing the exhaust emission of an spark ignition engine by means of engine modifications requires consideration of the effects of these modifications on the variations of crankshaft torque and the engine roughness respectively. Only if the roughness does not exceed a certain level the vehicle do not begin to surge. This paper presents a method for controlling the air-fuel ratio for a lean burn engine. Fuzzy rules and reasoning are utilized on-line to determine the control parameters. The main advantages of this method are simple structure and robust performance in a wide range of operating conditions. A non-linear model of an Si engine with the engine torque irregularity simulation is used in this study

Anti-double dipping rules for federal tax incentives

Energy Technology Data Exchange (ETDEWEB)

Ing, E.T.C. [Law Office of Edwin T.C. Ing, Washington, DC (United States)

1997-12-31

Political as well as technological changes are now reshaping the electric utility industry. While accommodating these changes, state legislative and regulatory agencies have the opportunity to promote public policies. In this regard, various state entities are evaluating appropriate incentives for renewable energy development so as to introduce greater competition in electric generation. For example, the California legislature is considering a supplemental production payment and the State of Iowa has instituted a low-interest loan program for wind and other alternative energy generation. By complementing the existing federal tax incentives, state incentives can spur the wind industry`s growth. If structured in the wrong way, however, state assistance programs will undercut the value of the federal tax incentives. The federal anti-double dipping rules apply to certain state programs. If a developer utilizes the wrong type of state assistance for a wind project, the anti-double dipping rules will reduce the federal tax incentives and this in turn will decrease the project`s profitability. Rather than suffer these results, very few if any developer will use the state program. Despite the time and effort a state may expend to enact a program for alternative energy development, the state assistance will be ineffectual. This paper reviews the counterproductive results which state assistance can have on a wind project because of the federal anti-double dipping rules.

Methodological approaches based on business rules

Directory of Open Access Journals (Sweden)

Anca Ioana ANDREESCU

2008-01-01

Full Text Available Business rules and business processes are essential artifacts in defining the requirements of a software system. Business processes capture business behavior, while rules connect processes and thus control processes and business behavior. Traditionally, rules are scattered inside application code. This approach makes it very difficult to change rules and shorten the life cycle of the software system. Because rules change more quickly than the application itself, it is desirable to externalize the rules and move them outside the application. This paper analyzes and evaluates three well-known business rules approaches. It also outlines some critical factors that have to be taken into account in the decision to introduce business rules facilities in a software system. Based on the concept of explicit manipulation of business rules in a software system, the need for a general approach based on business rules is discussed.

A Methodology for Multiple Rule System Integration and Resolution Within a Singular Knowledge Base

Science.gov (United States)

Kautzmann, Frank N., III

1988-01-01

Expert Systems which support knowledge representation by qualitative modeling techniques experience problems, when called upon to support integrated views embodying description and explanation, especially when other factors such as multiple causality, competing rule model resolution, and multiple uses of knowledge representation are included. A series of prototypes are being developed to demonstrate the feasibility of automating the process of systems engineering, design and configuration, and diagnosis and fault management. A study involves not only a generic knowledge representation; it must also support multiple views at varying levels of description and interaction between physical elements, systems, and subsystems. Moreover, it will involve models of description and explanation for each level. This multiple model feature requires the development of control methods between rule systems and heuristics on a meta-level for each expert system involved in an integrated and larger class of expert system. The broadest possible category of interacting expert systems is described along with a general methodology for the knowledge representation and control of mutually exclusive rule systems.

Automatic differentiation tools in the dynamic simulation of chemical engineering processes

Directory of Open Access Journals (Sweden)

Castro M.C.

2000-01-01

Full Text Available Automatic Differentiation is a relatively recent technique developed for the differentiation of functions applicable directly to the source code to compute the function written in standard programming languages. That technique permits the automatization of the differentiation step, crucial for dynamic simulation and optimization of processes. The values for the derivatives obtained with AD are exact (to roundoff. The theoretical exactness of the AD comes from the fact that it uses the same rules of differentiation as in differential calculus, but these rules are applied to an algorithmic specification of the function rather than to a formula. The main purpose of this contribution is to discuss the impact of Automatic Differentiation in the field of dynamic simulation of chemical engineering processes. The influence of the differentiation technique on the behavior of the integration code, the performance of the generated code and the incorporation of AD tools in consistent initialization tools are discussed from the viewpoint of dynamic simulation of typical models in chemical engineering.

Environmental assessment for final rule on nuclear power plant license renewal

International Nuclear Information System (INIS)

1991-12-01

The Atomic Energy Act and Nuclear Regulatory Commission (NRC) regulations provide for the renewal of nuclear power plant operating licenses beyond their initial 40-year term. The Act and NRC regulations, however, do not specify the procedures, criteria, and standards that must be satisfied in order to renew a license. The NRC is promulgating a rule (10 CFR Part 54) to codify such requirements prior to the receipt of applications for license renewal. The NRC has assessed the possible environmental effects of promulgating requirements in 10 CFR Part 54 now rather than employing such requirements in an ad hoc manner in individual licensing actions. The final part 54 rule requires the development of information and analyses to identify aging problems of systems, structures, and components unique to license renewal that will be of concern during the period of extended operation and will not be controlled by existing effective programs. In general, licensee activities for license renewal may involve replacement, refurbishment, inspection, testing, or monitoring. Such actions will be generally be within the range of similar actions taken for plants during the initial operating term. These actions would be primarily confined within the plants with potential for only minor disruption to the environment. It is unlikely that these actions would change the operating conditions of plants in ways that would change the environmental effects already being experienced. Relicensing under existing regulations would also be primarily focused on aging degradation and would likely result in requirements similar to those that will result from relicensing under the final rule

Experimental Engineering: Articulating and Valuing Design Experimentation

DEFF Research Database (Denmark)

Vallgårda, Anna; Grönvall, Erik; Fritsch, Jonas

2017-01-01

In this paper we propose Experimental Engineering as a way to articulate open- ended technological experiments as a legitimate design research practice. Experimental Engineering introduces a move away from an outcome or result driven design process towards an interest in existing technologies and...

Research on engineering-oriented constraints conflict detection in collaborative design of wire harness technology

Institute of Scientific and Technical Information of China (English)

LIU Xiaoping; HE Honglin; XU Benzhu

2012-01-01

Engineering-oriented constraint of harness technology has much information and project information presents progressive changes along with the design. Therefore, how to handle conflict resolution quickly is a problem to be solved. Process model of con- flict detection is put forward according to characteristics of harness technology design engineering-oriented constraint, and then two problems of how to conduct conflict positioning and judgment of constraint rules are introduced in this paper. Afterwards in this pa- per, constraint information directed acyclic graph is established by classified project constraint information to solve the conflict posi- tioning problem; solution of constraint satisfaction problem is applied to realize judgment problem of constraint rules. Finally, exam- ple is used to analyze the method in this paper to further verify the correctness and effectiveness of this method.

Spatio-Temporal Rule Mining

DEFF Research Database (Denmark)

Gidofalvi, Gyozo; Pedersen, Torben Bach

2005-01-01

Recent advances in communication and information technology, such as the increasing accuracy of GPS technology and the miniaturization of wireless communication devices pave the road for Location-Based Services (LBS). To achieve high quality for such services, spatio-temporal data mining techniques...... are needed. In this paper, we describe experiences with spatio-temporal rule mining in a Danish data mining company. First, a number of real world spatio-temporal data sets are described, leading to a taxonomy of spatio-temporal data. Second, the paper describes a general methodology that transforms...... the spatio-temporal rule mining task to the traditional market basket analysis task and applies it to the described data sets, enabling traditional association rule mining methods to discover spatio-temporal rules for LBS. Finally, unique issues in spatio-temporal rule mining are identified and discussed....

General Properties for an Agrawal Thermal Engine

Science.gov (United States)

Paéz-Hernández, Ricardo T.; Chimal-Eguía, Juan Carlos; Sánchez-Salas, Norma; Ladino-Luna, Delfino

2018-04-01

This paper presents a general property of endoreversible thermal engines known as the Semisum property previously studied in a finite-time thermodynamics context for a Curzon-Ahlborn (CA) engine but now extended to a simplified version of the CA engine studied by Agrawal in 2009 (A simplified version of the Curzon-Ahlborn engine, European Journal of Physics 30 (2009), 1173). By building the Ecological function, proposed by Angulo-Brown (An ecological optimization criterion for finite-time heat engines, Journal of Applied Physics 69 (1991), 7465-7469) in 1991, and considering two heat transfer laws an analytical expression is obtained for efficiency and power output which depends only on the heat reservoirs' temperature. When comparing the existing efficiency values of real power plants and the theoretical efficiencies obtained in this work, it is observed that the Semisum property is satisfied. Moreover, for the Newton and the Dulong-Petit heat transfer laws the existence of the g function is demonstrated and we confirm that in a Carnot-type thermal engine there is a general property independent of the heat transfer law used between the thermal reservoirs and the working substance.

Reducing Environmental Risks by Information Disclosure: Evidence in Residential Lead Paint Disclosure Rule

Science.gov (United States)

Bae, Hyunhoe

2012-01-01

Recently, there has been a surge in environmental regulations that require information disclosure. However, existing empirical evidence is limited to certain applications and has yet to generalize the effectiveness of this approach as a policy strategy to reduce environmental risks. This study evaluates the disclosure rule of the residential lead…

Food Web Assembly Rules for Generalized Lotka-Volterra Equations.

Directory of Open Access Journals (Sweden)

Jan O Haerter

2016-02-01

Full Text Available In food webs, many interacting species coexist despite the restrictions imposed by the competitive exclusion principle and apparent competition. For the generalized Lotka-Volterra equations, sustainable coexistence necessitates nonzero determinant of the interaction matrix. Here we show that this requirement is equivalent to demanding that each species be part of a non-overlapping pairing, which substantially constrains the food web structure. We demonstrate that a stable food web can always be obtained if a non-overlapping pairing exists. If it does not, the matrix rank can be used to quantify the lack of niches, corresponding to unpaired species. For the species richness at each trophic level, we derive the food web assembly rules, which specify sustainable combinations. In neighboring levels, these rules allow the higher level to avert competitive exclusion at the lower, thereby incorporating apparent competition. In agreement with data, the assembly rules predict high species numbers at intermediate levels and thinning at the top and bottom. Using comprehensive food web data, we demonstrate how omnivores or parasites with hosts at multiple trophic levels can loosen the constraints and help obtain coexistence in food webs. Hence, omnivory may be the glue that keeps communities intact even under extinction or ecological release of species.

Food Web Assembly Rules for Generalized Lotka-Volterra Equations.

Science.gov (United States)

Haerter, Jan O; Mitarai, Namiko; Sneppen, Kim

2016-02-01

In food webs, many interacting species coexist despite the restrictions imposed by the competitive exclusion principle and apparent competition. For the generalized Lotka-Volterra equations, sustainable coexistence necessitates nonzero determinant of the interaction matrix. Here we show that this requirement is equivalent to demanding that each species be part of a non-overlapping pairing, which substantially constrains the food web structure. We demonstrate that a stable food web can always be obtained if a non-overlapping pairing exists. If it does not, the matrix rank can be used to quantify the lack of niches, corresponding to unpaired species. For the species richness at each trophic level, we derive the food web assembly rules, which specify sustainable combinations. In neighboring levels, these rules allow the higher level to avert competitive exclusion at the lower, thereby incorporating apparent competition. In agreement with data, the assembly rules predict high species numbers at intermediate levels and thinning at the top and bottom. Using comprehensive food web data, we demonstrate how omnivores or parasites with hosts at multiple trophic levels can loosen the constraints and help obtain coexistence in food webs. Hence, omnivory may be the glue that keeps communities intact even under extinction or ecological release of species.

Organisational Rules in Schools: Teachers' Opinions about Functions of Rules, Rule-Following and Breaking Behaviours in Relation to Their Locus of Control

Science.gov (United States)

Demirkasimoglu, Nihan; Aydin, Inayet; Erdogan, Cetin; Akin, Ugur

2012-01-01

The main aim of this research is to examine teachers' opinions about functions of school rules, reasons for rule-breaking and results of rule-breaking in relation to their locus of control, gender, age, seniority and branch. 350 public elementary school teachers in Ankara are included in the correlational survey model study. According to the…

[Biomedical engineering today : An overview from the viewpoint of the German Biomedical Engineering Society].

Science.gov (United States)

Schlötelburg, C; Becks, T; Stieglitz, T

2010-08-01

Biomedical engineering is characterized by the interdisciplinary co-operation of technology, science, and ways of thinking, probably more than any other technological area. The close interaction of engineering and information sciences with medicine and biology results in innovative products and methods, but also requires high standards for the interdisciplinary transfer of ideas into products for patients' benefits. This article describes the situation of biomedical engineering in Germany. It displays characteristics of the medical device industry and ranks it with respect to the international market. The research landscape is described as well as up-to-date research topics and trends. The national funding situation of research in biomedical engineering is reviewed and existing innovation barriers are discussed.

Declarative Rule-based Safety for Robotic Perception Systems

DEFF Research Database (Denmark)

Mogensen, Johann Thor Ingibergsson; Kraft, Dirk; Schultz, Ulrik Pagh

2017-01-01

Mobile robots are used across many domains from personal care to agriculture. Working in dynamic open-ended environments puts high constraints on the robot perception system, which is critical for the safety of the system as a whole. To achieve the required safety levels the perception system needs...... to be certified, but no specific standards exist for computer vision systems, and the concept of safe vision systems remains largely unexplored. In this paper we present a novel domain-specific language that allows the programmer to express image quality detection rules for enforcing safety constraints...

Safety Computer Vision Rules for Improved Sensor Certification

DEFF Research Database (Denmark)

Mogensen, Johann Thor Ingibergsson; Kraft, Dirk; Schultz, Ulrik Pagh

2017-01-01

Mobile robots are used across many domains from personal care to agriculture. Working in dynamic open-ended environments puts high constraints on the robot perception system, which is critical for the safety of the system as a whole. To achieve the required safety levels the perception system needs...... to be certified, but no specific standards exist for computer vision systems, and the concept of safe vision systems remains largely unexplored. In this paper we present a novel domain-specific language that allows the programmer to express image quality detection rules for enforcing safety constraints...

A Spoonful of (Added) Sugar Helps the Constitution Go Down: Curing the Compelled Speech Commercial Speech Doctrine with FDA’s Added Sugars Rule.

Science.gov (United States)

Smith, Colleen

On May 27, 2016, the Food and Drug Administration (FDA) announced that it was adopting a new rule that requires food manufacturers to list—on the already mandated Nutrition Facts label—how many grams of sugar have been added to a food product. Many opponents have criticized this “added sugars” rule on First Amendment grounds, arguing that the rule violates the commercial speech rights of food manufacturers. Whether the rule would survive constitutional scrutiny or not is an open question because the compelled commercial speech doctrine is anything but clear. Courts are split over whether Zauderer’s rational basis test, Central Hudson’s intermediate scrutiny, or some combination of the two should apply to a mandated disclosure like FDA’s added sugars rule. This Paper explains that the added sugars rule is unique in the history of mandated nutrition labeling in that the rule is motivated largely by public health concerns and backed by reports that assert that consumers should limit their intake of added sugars. In contrast, correcting and preventing consumer deception has been a major driving force behind the remainder of FDA’s mandated nutrition labeling. Because of this distinct rationale, the added sugars rule does not fit neatly into any currently existing compelled commercial speech test. This Paper uses the added sugars rule to highlight the deficiencies in the existing tests. Finally, this Paper proposes a new compelled commercial speech test that would adequately balance the interest of all of the effected parties: the government, the public, and food manufacturers.

Externally heated valve engine a new approach to piston engines

CERN Document Server

Kazimierski, Zbyszko

2016-01-01

This book reports on a novel approach for generating mechanical energy from different, external heat sources using the body of a typical piston engine with valves. By presenting simple yet effective numerical models, the authors show how this new approach, which combines existing internal combustion technology with a lubrication system, is able to offer an economic solution to the problem of mechanical energy generation in piston engines. Their results also show that a stable heat generation process can be guaranteed outside of the engine. The book offers a detailed report on physical and numerical models of 4-stroke and 2-stroke versions of the EHVE together with different models of heat exchange, valves and results of their simulations. It also delivers the test results of an engine prototype run in laboratory conditions. By presenting a novel theoretical framework and providing readers with extensive knowledge of both the advantages and challenges of the method, this book is expected to inspire academic re...

PENGEMBANGAN SISTEM EVALUASI DESAIN PRODUK BERBASIS ROTAN DENGAN PENDEKATAN REKAYASA KANSEI DAN ASSOCIATION RULES SYSTEM

Directory of Open Access Journals (Sweden)

Vonny Setiaries Johan

2016-11-01

Full Text Available In product development, it is very important for manufacturers to find out what the customer wants from the product. On the other hand, manufacturers do not know clearly about what the customer wants from the product. This study proposes an evaluation method of product design using Kansei engineering methods and association rules approach. Using rattan dining chair as the object, the chair design divided into five elements, which are backrest, seat, armrest, base and woven. In this study, Kansei words from customers such as beautiful, unique, innovative, comfortable, natural, modern, sturdy and simple can be translated in to element design.   Using the support and confidence values, if-then rules can be used as the basis for the assessment of rattan dining chairs

Black Lung Benefits Act: standards for chest radiographs. Direct final rule; request for comments.

Science.gov (United States)

2013-06-13

Physicians and adjudicators use chest radiographs (X-rays) as a tool in evaluating whether a coal miner suffers from pneumoconiosis (black lung disease). Accordingly, the Department's regulations implementing the Black Lung Benefits Act allow the submission of radiographs in connection with benefit claims and set out quality standards for their performance. These standards are currently limited to film radiographs. In recent years, many medical facilities have phased out film radiography in favor of digital radiography. This direct final rule updates the existing film-radiograph standards and provides parallel standards for digital radiographs. This rule also updates outdated terminology and removes certain obsolete provisions.

Tissue Engineering Stem Cells - An e-Governance Strategy.

Science.gov (United States)

Grange, Simon

2011-01-01

The rules of governance are changing. They are necessarily becoming more stringent as interventions offered to treat conditions carry unpredictable side effects, often associated with novel therapeutic vectors. The clinical relevance of this relates to the obligations of those involved in research, to ensure the best protection for subjects whilst encouraging the development of the field. Existing evidence supports the concept of e-Governance both in operational health research and more broadly in the strategic domain of policy formation. Building on the impact of the UK Comprehensive Research Network and recent EU Directives, it is now possible to focus on the issues of regulation for cell therapies in musculoskeletal science through the development of the Advanced Therapeutic Medicinal Products (ATMP) category of research products. This article reviews the framework that has borne this and the need for more detailed Virtual Research Integration and Collaboration (VRIC) systems to ensure regulatory compliance. Technology research and development plans must develop in close association between tissue engineering and treating clinicians. The scope of this strategy relates to the handling of human tissues the transport and storage of specimens in accordance with current EU directives and the Human Tissue Authority (HTA) regulations.

Rules for Forest Interactions between Dislocations

International Nuclear Information System (INIS)

Wickham, L. K.; Schwarz, K. W.; Stoelken, J. S.

1999-01-01

The dynamical interactions of dislocations existing on intersecting glide planes have been investigated using numerical simulations based on isotropic linear elastic theory. It is found that such dislocations either repel, attract and form growing junctions, or attract and form bound crossed states. Which of these occurs can be predicted from a surprisingly simple analysis of the initial configurations. The outcome is determined primarily by the angles which the dislocations initially make with the glide-plane intersection edge, and is largely independent of the initial distance between the dislocations, their initial curvature, or ambient applied stresses. The results provide a rule for dealing with forest interactions within the context of large multiple-dislocation computations. (c) 1999 The American Physical Society

Instability Rules: The Ten Most Amazing Ideas of Modern Science

Science.gov (United States)

Flowers, Charles

2002-03-01

World-altering discoveries that reveal a universe of uncertainty and constant change Whether probing the farthest reaches of the vast universe or exploring the microscopic world of genetics and the subatomic world of quantum mechanics, Instability Rules is a remarkably informative and engaging look at ten milestone discoveries and their discoverers-a wide range of very human personalities whose insights have dramatically altered our most basic assumptions about human existence during the last century. The stories include Edwin Hubble and the expanding universe, Alfred Wegener and continental drift, Neils Bohr and quantum mechanics, Alan Turing and artificial intelligence, and James Watson and Francis Crick and DNA. Also covering discoveries of the twenty-first century that are already refining these and other ideas, Instability Rules is an exhilarating, sometimes amusing encounter with the defining scientific discoveries of our age.

Final Rule for Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures

Science.gov (United States)

EPA adopted emission standards and related provisions for aircraft gas turbine engines with rated thrusts greater than 26.7 kilonewtons. These engines are used primarily on commercial passenger and freight aircraft.

Fatigue assessment by the RCC-MR design rules: remarks on the elastic analysis

International Nuclear Information System (INIS)

Taleb, L.; Sidoroff, F.

1999-01-01

According to RCC--MR (French rules for mechanical engineering design of FBR), fatigue life assessment is based on the evaluation of the equivalent elastoplastic strain range resulting from a given cyclic loading. Two methods can be used according to whether an elastoplastic or an elastic structure analysis is performed. The elastic analysis is of course more attractive for it avoids a heavy iterative elastoplastic analysis and an expensive identification of the material behavior from mechanical tests. On the other hand it relies on some empirical extrapolation rules from the elastic to the real case. The purpose of the present paper is to draw attention to some limitations of this procedure. In particular attention will be focused on two points: 1, the classification of the applied stress into primary and secondary parts is essential and it is shown that the thermal stresses which are often considered as secondary may in some cases play a primary role; 2. the Neuber's rule which is used to evaluate the plastic strain from the elastic stress will be shown to be significantly wrong for some special configurations. This is in fact essentially related to situations where the elastic follow up effect is important. (authors)

Binary effectivity rules

DEFF Research Database (Denmark)

Keiding, Hans; Peleg, Bezalel

2006-01-01

is binary if it is rationalized by an acyclic binary relation. The foregoing result motivates our definition of a binary effectivity rule as the effectivity rule of some binary SCR. A binary SCR is regular if it satisfies unanimity, monotonicity, and independence of infeasible alternatives. A binary...

Technical rules in law

Energy Technology Data Exchange (ETDEWEB)

Debelius, J

1978-08-01

An important source of knowledge for technical experts is the state of the art reflected by catalogues of technical rules. Technical rules may also achieve importance in law due to a legal transformation standard. Here, rigid and flexible reference are controversial with regard to their admissibility from the point of view of constitutional law. In case of a divergence from the generally accepted technical rules, it is assumed - refutably - that the necessary care had not been taken. Technical rules are one out of several sources of information; they have no normative effect. This may result in a duty of anyone applying them to review the state of technology himself.

Technical rules in law

International Nuclear Information System (INIS)

Debelius, J.

1978-01-01

An important source of knowledge for technical experts is the state of the art reflected by catalogues of technical rules. Technical rules may also achieve importance in law due to a legal transformation standard. Here, rigid and flexible reference are controversial with regard to their admissibility from the point of view of constitutional law. In case of a divergence from the generally accepted technical rules, it is assumed - refutably - that the necessary care had not been taken. Technical rules are one out of several sources of information; they have no normative effect. This may result in a duty of anyone applying them to review the state of technology himself. (orig.) [de

Data engineering systems: Computerized modeling and data bank capabilities for engineering analysis

Science.gov (United States)

Kopp, H.; Trettau, R.; Zolotar, B.

1984-01-01

The Data Engineering System (DES) is a computer-based system that organizes technical data and provides automated mechanisms for storage, retrieval, and engineering analysis. The DES combines the benefits of a structured data base system with automated links to large-scale analysis codes. While the DES provides the user with many of the capabilities of a computer-aided design (CAD) system, the systems are actually quite different in several respects. A typical CAD system emphasizes interactive graphics capabilities and organizes data in a manner that optimizes these graphics. On the other hand, the DES is a computer-aided engineering system intended for the engineer who must operationally understand an existing or planned design or who desires to carry out additional technical analysis based on a particular design. The DES emphasizes data retrieval in a form that not only provides the engineer access to search and display the data but also links the data automatically with the computer analysis codes.

From the search for natural laws to the discovery of contingent rules in economics

Directory of Open Access Journals (Sweden)

Nicolas Postel

2011-11-01

Full Text Available In this article, the author defends the idea that one of the positiveresults of modern economic analysis is the conviction that there is no natural law in economics. Thus, the most thorough scientific research which has tried to provide an analytical foundation for the mythical invisible hand, the “general equilibrium paradigm,” has finally shown that such an equilibration process cannot be formally demonstrated. Hence, we can say that economists cannot demonstrate the existence of a law of “supply and demand” but, more simply, can assert that some causal but contingent relations may exist between price, supply and demand. According to this result, the critical approach of Kenneth John Arrow concludes with the necessity of social and moral rule (for the good functioning of the market. It is, thus, necessary to assume the contingent nature of economic rules, and the absence of natural law, and consequently, to modify economists’ theoretical model.

Engineering task plan for BX/BY compressor upgrade

International Nuclear Information System (INIS)

Strand, R.G.

1995-01-01

This Engineering Task Plan outlines the remaining work to be completed for the BX/BY Instrument Air upgrade. Initial work efforts were guided by Engineering Work Plan, ''BX-BY Compressor Upgrade'' dated 1-25-93 (see Attachment A) which is provided for information. The overall engineering task is to provide a permanent replacement for the instrument air supply system for the 241-BX/BY Tank Farms. The existing system consists of a 25 horsepower Worthington non-lube compressor and an Oriad air dryer. The existing equipment is dated, requires high maintenance and is located in a contaminated zone making it unusable. The BX/BY instrument air replacement unit will be one of the 100 SCFM generic air stations. This station will be permanently sited with the addition of drawing changes to provide a concrete foundation, air piping to existing lines and electrical power supply tie-ins

Assessing the operation rules of a reservoir system based on a detailed modelling-chain

Science.gov (United States)

Bruwier, M.; Erpicum, S.; Pirotton, M.; Archambeau, P.; Dewals, B.

2014-09-01

According to available climate change scenarios for Belgium, drier summers and wetter winters are expected. In this study, we focus on two muti-purpose reservoirs located in the Vesdre catchment, which is part of the Meuse basin. The current operation rules of the reservoirs are first analysed. Next, the impacts of two climate change scenarios are assessed and enhanced operation rules are proposed to mitigate these impacts. For this purpose, an integrated model of the catchment was used. It includes a hydrological model, one-dimensional and two-dimensional hydraulic models of the river and its main tributaries, a model of the reservoir system and a flood damage model. Five performance indicators of the reservoir system have been defined, reflecting its ability to provide sufficient drinking, to control floods, to produce hydropower and to reduce low-flow condition. As shown by the results, enhanced operation rules may improve the drinking water potential and the low-flow augmentation while the existing operation rules are efficient for flood control and for hydropower production.

Assessing the operation rules of a reservoir system based on a detailed modelling chain

Science.gov (United States)

Bruwier, M.; Erpicum, S.; Pirotton, M.; Archambeau, P.; Dewals, B. J.

2015-03-01

According to available climate change scenarios for Belgium, drier summers and wetter winters are expected. In this study, we focus on two multi-purpose reservoirs located in the Vesdre catchment, which is part of the Meuse basin. The current operation rules of the reservoirs are first analysed. Next, the impacts of two climate change scenarios are assessed and enhanced operation rules are proposed to mitigate these impacts. For this purpose, an integrated model of the catchment was used. It includes a hydrological model, one-dimensional and two-dimensional hydraulic models of the river and its main tributaries, a model of the reservoir system and a flood damage model. Five performance indicators of the reservoir system have been defined, reflecting its ability to provide sufficient drinking water, to control floods, to produce hydropower and to reduce low-flow conditions. As shown by the results, enhanced operation rules may improve the drinking water potential and the low-flow augmentation while the existing operation rules are efficient for flood control and for hydropower production.

Critical Evaluation of Validation Rules Automated Extraction from Data

Directory of Open Access Journals (Sweden)

David Pejcoch

2014-10-01

Full Text Available The goal of this article is to critically evaluate a possibility of automatic extraction of such kind of rules which could be later used within a Data Quality Management process for validation of records newly incoming to Information System. For practical demonstration the 4FT-Miner procedure implemented in LISpMiner System was chosen. A motivation for this task is the potential simplification of projects focused on Data Quality Management. Initially, this article is going to critically evaluate a possibility of fully automated extraction with the aim to identify strengths and weaknesses of this approach in comparison to its alternative, when at least some a priori knowledge is available. As a result of practical implementation, this article provides design of recommended process which would be used as a guideline for future projects. Also the question of how to store and maintain extracted rules and how to integrate them with existing tools supporting Data Quality Management is discussed

MODIFIED ARMIJO RULE ON GRADIENT DESCENT AND CONJUGATE GRADIENT

Directory of Open Access Journals (Sweden)

ZURAIDAH FITRIAH

2017-10-01

Full Text Available Armijo rule is an inexact line search method to determine step size in some descent method to solve unconstrained local optimization. Modified Armijo was introduced to increase the numerical performance of several descent algorithms that applying this method. The basic difference of Armijo and its modified are in existence of a parameter and estimating the parameter that is updated in every iteration. This article is comparing numerical solution and time of computation of gradient descent and conjugate gradient hybrid Gilbert-Nocedal (CGHGN that applying modified Armijo rule. From program implementation in Matlab 6, it's known that gradient descent was applying modified Armijo more effectively than CGHGN from one side: iteration needed to reach some norm of the gradient  (input by the user. The amount of iteration was representing how long the step size of each algorithm in each iteration. In another side, time of computation has the same conclusion.

Nonlinear adaptive synchronization rule for identification of a large amount of parameters in dynamical models

International Nuclear Information System (INIS)

Ma Huanfei; Lin Wei

2009-01-01

The existing adaptive synchronization technique based on the stability theory and invariance principle of dynamical systems, though theoretically proved to be valid for parameters identification in specific models, is always showing slow convergence rate and even failed in practice when the number of parameters becomes large. Here, for parameters update, a novel nonlinear adaptive rule is proposed to accelerate the rate. Its feasibility is validated by analytical arguments as well as by specific parameters identification in the Lotka-Volterra model with multiple species. Two adjustable factors in this rule influence the identification accuracy, which means that a proper choice of these factors leads to an optimal performance of this rule. In addition, a feasible method for avoiding the occurrence of the approximate linear dependence among terms with parameters on the synchronized manifold is also proposed.

Broadening of nuclear engineering programs: An engineering physics approach at Rensselaer

International Nuclear Information System (INIS)

Malaviya, B.K.

1990-01-01

With the maturing of nuclear engineering as an academic discipline and the uncertainty surrounding the nuclear industry, attention is being increasingly turned to ways in which the base of traditional nuclear engineering programs in universities can be broadened to make them more attractively useful to a wider class of potential students and employers while maintaining the strengths in mainstream areas of nuclear technology. An approach that seems to provide a natural evolution combining the existing programmatic strengths, infrastructure, and resources with the trending needs of a broad segment of diversified industries is the development and initiation of an engineering physics degree program as an adjunct to an established nuclear engineering curriculum. In line with these developments, a new comprehensive academic program offering baccalaureate, master's, and doctoral degrees in engineering physics has been developed and formally instituted at Rensselaer Polytechnic Institute (RPI). It provides a valuable opportunity for students to pursue education and research that cuts across traditional disciplinary lines, leading to a wide variety of career opportunities in industry, government, national research and defense laboratories, and academia

Following the Rules.

Science.gov (United States)

Katz, Anne

2016-05-01

I am getting better at following the rules as I grow older, although I still bristle at many of them. I was a typical rebellious teenager; no one understood me, David Bowie was my idol, and, one day, my generation was going to change the world. Now I really want people to understand me: David Bowie remains one of my favorite singers and, yes, my generation has changed the world, and not necessarily for the better. Growing up means that you have to make the rules, not just follow those set by others, and, at times, having rules makes a lot of sense.
.

Development of a cause analysis system for a CPCS trip by using the rule-base deduction method.

Science.gov (United States)

Park, Je-Yun; Koo, In-Soo; Sohn, Chang-Ho; Kim, Jung-Seon; Cho, Gi-Ho; Park, Hee-Seok

2009-07-01

A Core Protection Calculator System (CPCS) was developed to initiate a Reactor Trip under the circumstance of certain transients by a Combustion Engineering Company. The major function of the Core Protection Calculator System is to generate contact outputs for the Departure from Nucleate Boiling Ratio (DNBR) Trip and a Local Power Density (LPD) Trip. But in a Core Protection Calculator System, a trip cause cannot be identified, thus only trip signals are transferred to the Plant Protection System (PPS) and only the trip status is displayed. It could take a considerable amount of time and effort for a plant operator to analyze the trip causes of a Core Protection Calculator System. So, a Cause Analysis System for a Core Protection Calculator System (CASCPCS) has been developed by using the rule-base deduction method to assist operators in a Nuclear Power Plant. CASCPCS consists of three major parts. Inference engine has a role of controlling the searching knowledge base, executing the rules and tracking the inference process by using the depth-first searching method. Knowledge base consists of four major parts: rules, data base constants, trip buffer variables and causes. And a user interface is implemented by using menu-driven and window display techniques. The advantage of CASCPCS is that it saves time and effort to diagnose the trip causes of a Core Protection Calculator System, it increases a plant's availability and reliability, and it makes it easy to manage CASCPCS because of using only a cursor control.

Privacy Protection Method for Multiple Sensitive Attributes Based on Strong Rule

Directory of Open Access Journals (Sweden)

Tong Yi

2015-01-01

Full Text Available At present, most studies on data publishing only considered single sensitive attribute, and the works on multiple sensitive attributes are still few. And almost all the existing studies on multiple sensitive attributes had not taken the inherent relationship between sensitive attributes into account, so that adversary can use the background knowledge about this relationship to attack the privacy of users. This paper presents an attack model with the association rules between the sensitive attributes and, accordingly, presents a data publication for multiple sensitive attributes. Through proof and analysis, the new model can prevent adversary from using the background knowledge about association rules to attack privacy, and it is able to get high-quality released information. At last, this paper verifies the above conclusion with experiments.

78 FR 63937 - Approval and Promulgation of Implementation Plans; Approval and Promulgation of State Air Quality...

Science.gov (United States)

2013-10-25

... Quality Plans for Designated Facilities and Pollutants, State of Iowa; Control of Emissions From Existing Hospital/ Medical/Infectious Waste Incinerator Units, Negative Declaration and 111(d) Plan Rescission... existing state air quality rules, approve an exemption from constructing permitting for engines used in...

D-FLER - A Distributed Fuzzy Logic Engine for Rule-Based Wireless Sensor Networks

NARCIS (Netherlands)

Marin Perianu, Mihai; Havinga, Paul J.M.

2007-01-01

We propose D-FLER, a distributed, general-purpose reasoning engine for WSN. D-FLER uses fuzzy logic for fusing individual and neighborhood observations, in order to produce a more accurate and reliable result. Thorough simulation, we evaluate D-FLER in a fire-detection scenario, using both fire and

D-FLER: A Distributed Fuzzy Logic Engine for Rule-based Wireless Sensor Networks

NARCIS (Netherlands)

Marin Perianu, Mihai; Havinga, Paul J.M.

2007-01-01

We propose D-FLER, a distributed, general-purpose reasoning engine for WSN. D-FLER uses fuzzy logic for fusing individual and neighborhood observations, in order to produce a more accurate and reliable result. Thorough simulation, we evaluate D-FLER in a fire-detection scenario, using both fire and

Engineering Leadership Education--The Search for Definition and a Curricular Approach

Science.gov (United States)

Schuhmann, Richard J.

2010-01-01

While industry and academia agree that leadership skills are critical for engineering graduates, there exists no consensus regarding the definition of "engineering leadership". The engineering leadership development program at Penn State University has a decade-long experience in teaching leadership to engineering undergraduates. In…

Analysing the integration of engineering in science lessons with the Engineering-Infused Lesson Rubric

Science.gov (United States)

Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.

2017-09-01

Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons were selected at random from three online repositories, and coded with the rubric. Overall results documented the strengths of existing lessons, as well as many components that teachers might strengthen. In addition, a subset of characteristics was found to distinguish lessons with the highest level of engineering infusion. Findings are discussed in relation to the potential of the rubric to help teachers use research evidence-informed practice generally, and in relation to the new content demands of the U.S. Next Generation Science Standards, in particular.

Firm heterogeneity, Rules of Origin and Rules of Cumulation

OpenAIRE

Bombarda , Pamela; Gamberoni , Elisa

2013-01-01

We analyse the impact of relaxing rules of origin (ROOs) in a simple setting with heterogeneous firms that buy intermediate inputs from domestic and foreign sources. In particular, we consider the impact of switching from bilateral to diagonal cumulation when using preferences (instead of paying the MFN tariff) involving the respect of rules of origin. We find that relaxing the restrictiveness of the ROOs leads the least productive exporters to stop exporting. The empirical part confirms thes...

The Product and Quotient Rules Revisited

Science.gov (United States)

Eggleton, Roger; Kustov, Vladimir

2011-01-01

Mathematical elegance is illustrated by strikingly parallel versions of the product and quotient rules of basic calculus, with some applications. Corresponding rules for second derivatives are given: the product rule is familiar, but the quotient rule is less so.

77 FR 30926 - Airworthiness Directives; Pratt & Whitney Division Turbofan Engines

Science.gov (United States)

2012-05-24

... Division Turbofan Engines AGENCY: Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed... turbofan engines. The existing AD currently requires initial and repetitive fluorescent penetrant... turbofan engines. That AD requires initial and repetitive FPI for cracks in the blade locking and loading...

Extended prediction rule to optimise early detection of heart failure in older persons with non-acute shortness of breath : A cross-sectional study

NARCIS (Netherlands)

Van Riet, Evelien E S; Hoes, Arno W.; Limburg, Alexander; Landman, Marcel A J; Kemperman, Hans; Rutten, Frans H.

2016-01-01

Objectives: There is a need for a practical tool to aid general practitioners in early detection of heart failure in the elderly with shortness of breath. In this study, such a screening rule was developed based on an existing rule for detecting heart failure in older persons with a diagnosis of

Ethical education in software engineering: responsibility in the production of complex systems.

Science.gov (United States)

Génova, Gonzalo; González, M Rosario; Fraga, Anabel

2007-12-01

Among the various contemporary schools of moral thinking, consequence-based ethics, as opposed to rule-based, seems to have a good acceptance among professionals such as software engineers. But naïve consequentialism is intellectually too weak to serve as a practical guide in the profession. Besides, the complexity of software systems makes it very hard to know in advance the consequences that will derive from professional activities in the production of software. Therefore, following the spirit of well-known codes of ethics such as the ACM/IEEE's, we advocate for a more solid position in the ethical education of software engineers, which we call 'moderate deontologism', that takes into account both rules and consequences to assess the goodness of actions, and at the same time pays an adequate consideration to the absolute values of human dignity. In order to educate responsible professionals, however, this position should be complemented with a pedagogical approach to virtue ethics.

Army Corps of Engineers: Water Resource Authorizations, Appropriations, and Activities

Science.gov (United States)

2017-02-27

eight divisions that are further divided into 38 districts.2 This report provides an overview of the Corps water resource activities , including...rules associated with authorization and appropriation earmarks, individual Members often brought attention to similar activities for congressional...Army Corps of Engineers: Water Resource Authorizations, Appropriations, and Activities Nicole T. Carter Specialist in Natural Resources Policy

The Rules of Origin of Goods as an Instrument of the State Foreign Trade Policy

Directory of Open Access Journals (Sweden)

Storozhchuk Volodymyr M.

2018-01-01

Full Text Available The article is aimed at analyzing the types of rules of origin of goods, existing in the international practice, and approaches to assess their impact on the foreign trade flows. The article considers two types of rules for determining the country of origin of goods used in the international practice: non-preferential and preferential. The main characteristics of the non-preferential rules of origin and peculiarities of their application in Ukraine are defined and systematized. The article defines the priority functions of the customs tariff, subject to the use of non-preferential rules of origin of goods, to which are classified: protective, fiscal, and regulatory. The criteria used in the non-preferential rules of origin of goods have been considered. It has been substantiated that the priority functions of the customs tariff subject to the use of preferential rules of origin of goods are the integration and progressive functions. The criteria used in the preferential rules of origin of goods have been considered. Based on the results of the analysis of the rules of origin of goods, it has been substantiated that their use can be considered as a restrictive or an incentive tool of the State foreign trade policy. It has been shown that of special importance, in the context of Ukraine’s integration into the global value chains, is the goods’ acquisition of the status of preferential origin in accordance with the criterion of diagonal cumulation within the framework of the Regional Pan-Euro-Med Convention, which requires Ukraine to conclude a number of bilateral agreements with the identical preferential rules of origin of goods.

Goal-Equivalent Secure Business Process Re-engineering

DEFF Research Database (Denmark)

Acosta, Hugo Andrés Lópes; Massacci, Fabio; Zannone, Nicola

2008-01-01

that they are somehow “equivalent”. In this paper we propose a method for passing from SI*, a modeling language for capturing and modeling functional, security, and trust organizational and system requirements, to business process specifications and vice versa. In particular, starting from an old secure business......The introduction of information technologies in health care systems often requires to re-engineer the business processes used to deliver care. Obviously, the new and re-engineered processes are observationally different and thus we cannot use existing model-based techniques to argue...... process, we reconstruct the functional and security requirements at organizational level that such a business process was supposed to meet (including the trust relations that existed among the members of the organization). To ensure that the re-engineered business process meets the elicited requirements...

Autonomous Flight Rules Concept: User Implementation Costs and Strategies

Science.gov (United States)

Cotton, William B.; Hilb, Robert

2014-01-01

The costs to implement Autonomous Flight Rules (AFR) were examined for estimates in acquisition, installation, training and operations. The user categories were airlines, fractional operators, general aviation and unmanned aircraft systems. Transition strategies to minimize costs while maximizing operational benefits were also analyzed. The primary cost category was found to be the avionics acquisition. Cost ranges for AFR equipment were given to reflect the uncertainty of the certification level for the equipment and the extent of existing compatible avionics in the aircraft to be modified.

75 FR 51934 - Telemarketing Sales Rule

Science.gov (United States)

2010-08-24

... FEDERAL TRADE COMMISSION 16 CFR Part 310 Telemarketing Sales Rule AGENCY: Federal Trade Commission. ACTION: Final rule; correction. SUMMARY: The Federal Trade Commission (``Commission'') published a final rule on August 10, 2010, adopting amendments to the Telemarketing Sales Rule that address the...

Increase in the Accuracy of Calculating Length of Horizontal Cable SCS in Civil Engineering

Science.gov (United States)

Semenov, A.

2017-11-01

A modification of the method for calculating the horizontal cable consumption of SCS established at civil engineering facilities is proposed. The proposed procedure preserves the prototype simplicity and provides a 5 percent accuracy increase. The values of the achieved accuracy are justified, their compliance with the practice of real projects is proved. The method is brought to the level of the engineering algorithm and formalized in the form of 12/70 rule.

Autonomous Rule Creation for Intrusion Detection

Energy Technology Data Exchange (ETDEWEB)

Todd Vollmer; Jim Alves-Foss; Milos Manic

2011-04-01

Many computational intelligence techniques for anomaly based network intrusion detection can be found in literature. Translating a newly discovered intrusion recognition criteria into a distributable rule can be a human intensive effort. This paper explores a multi-modal genetic algorithm solution for autonomous rule creation. This algorithm focuses on the process of creating rules once an intrusion has been identified, rather than the evolution of rules to provide a solution for intrusion detection. The algorithm was demonstrated on anomalous ICMP network packets (input) and Snort rules (output of the algorithm). Output rules were sorted according to a fitness value and any duplicates were removed. The experimental results on ten test cases demonstrated a 100 percent rule alert rate. Out of 33,804 test packets 3 produced false positives. Each test case produced a minimum of three rule variations that could be used as candidates for a production system.

Methodological approaches based on business rules

OpenAIRE

Anca Ioana ANDREESCU; Adina UTA

2008-01-01

Business rules and business processes are essential artifacts in defining the requirements of a software system. Business processes capture business behavior, while rules connect processes and thus control processes and business behavior. Traditionally, rules are scattered inside application code. This approach makes it very difficult to change rules and shorten the life cycle of the software system. Because rules change more quickly than the application itself, it is desirable to externalize...

Engineering education in 21st century

Science.gov (United States)

Alam, Firoz; Sarkar, Rashid; La Brooy, Roger; Chowdhury, Harun

2016-07-01

The internationalization of engineering curricula and engineering practices has begun in Europe, Anglosphere (English speaking) nations and Asian emerging economies through the Bologna Process and International Engineering Alliance (Washington Accord). Both the Bologna Process and the Washington Accord have introduced standardized outcome based engineering competencies and frameworks for the attainment of these competencies by restructuring existing and undertaking some new measures for an intelligent adaptation of the engineering curriculum and pedagogy. Thus graduates with such standardized outcome based curriculum can move freely as professional engineers with mutual recognition within member nations. Despite having similar or near similar curriculum, Bangladeshi engineering graduates currently cannot get mutual recognition in nations of Washington Accord and the Bologna Process due to the non-compliance of outcome based curriculum and pedagogy. This paper emphasizes the steps that are required to undertake by the engineering educational institutions and the professional body in Bangladesh to make the engineering competencies, curriculum and pedagogy compliant to the global engineering alliance. Achieving such compliance will usher in a new era for the global mobility and global engagement by Bangladesh trained engineering graduates.

Testing the performance of technical trading rules in the Chinese markets based on superior predictive test

Science.gov (United States)

Wang, Shan; Jiang, Zhi-Qiang; Li, Sai-Ping; Zhou, Wei-Xing

2015-12-01

Technical trading rules have a long history of being used by practitioners in financial markets. The profitable ability and efficiency of technical trading rules are yet controversial. In this paper, we test the performance of more than seven thousand traditional technical trading rules on the Shanghai Securities Composite Index (SSCI) from May 21, 1992 through June 30, 2013 and China Securities Index 300 (CSI 300) from April 8, 2005 through June 30, 2013 to check whether an effective trading strategy could be found by using the performance measurements based on the return and Sharpe ratio. To correct for the influence of the data-snooping effect, we adopt the Superior Predictive Ability test to evaluate if there exists a trading rule that can significantly outperform the benchmark. The result shows that for SSCI, technical trading rules offer significant profitability, while for CSI 300, this ability is lost. We further partition the SSCI into two sub-series and find that the efficiency of technical trading in sub-series, which have exactly the same spanning period as that of CSI 300, is severely weakened. By testing the trading rules on both indexes with a five-year moving window, we find that during the financial bubble from 2005 to 2007, the effectiveness of technical trading rules is greatly improved. This is consistent with the predictive ability of technical trading rules which appears when the market is less efficient.

Changing the paradigm for engineering ethics.

Science.gov (United States)

Schmidt, Jon Alan

2014-12-01

Modern philosophy recognizes two major ethical theories: deontology, which encourages adherence to rules and fulfillment of duties or obligations; and consequentialism, which evaluates morally significant actions strictly on the basis of their actual or anticipated outcomes. Both involve the systematic application of universal abstract principles, reflecting the culturally dominant paradigm of technical rationality. Professional societies promulgate codes of ethics with which engineers are expected to comply (deontology), while courts and the public generally assign liability to engineers primarily in accordance with the results of their work, whether intended or unintended (consequentialism). A third option, prominent in ancient philosophy, has reemerged recently: virtue ethics, which recognizes that sensitivity to context and practical judgment are indispensable in particular concrete situations, and therefore rightly focuses on the person who acts, rather than the action itself. Beneficial character traits--i.e., virtues--are identified within a specific social practice in light of the internal goods that are unique to it. This paper proposes a comprehensive framework for implementing virtue ethics within engineering.

Integrating Cost Engineering and Project Management in a Junior Engineering Economics Course and a Senior Capstone Project Design Course

Science.gov (United States)

Tickles, Virginia C.; Li, Yadong; Walters, Wilbur L.

2013-01-01

Much criticism exists concerning a lack of focus on real-world problem-solving in the science, technology, engineering and mathematics (STEM) infrastructures. Many of these critics say that current educational infrastructures are incapable in preparing future scientists and engineers to solve the complex and multidisciplinary problems this society…

Endogeneously arising network allocation rules

NARCIS (Netherlands)

Slikker, M.

2006-01-01

In this paper we study endogenously arising network allocation rules. We focus on three allocation rules: the Myerson value, the position value and the component-wise egalitarian solution. For any of these three rules we provide a characterization based on component efficiency and some balanced

Characterizing Distributed Concurrent Engineering Teams: A Descriptive Framework for Aerospace Concurrent Engineering Design Teams

Science.gov (United States)

Chattopadhyay, Debarati; Hihn, Jairus; Warfield, Keith

2011-01-01

As aerospace missions grow larger and more technically complex in the face of ever tighter budgets, it will become increasingly important to use concurrent engineering methods in the development of early conceptual designs because of their ability to facilitate rapid assessments and trades in a cost-efficient manner. To successfully accomplish these complex missions with limited funding, it is also essential to effectively leverage the strengths of individuals and teams across government, industry, academia, and international agencies by increased cooperation between organizations. As a result, the existing concurrent engineering teams will need to increasingly engage in distributed collaborative concurrent design. This paper is an extension of a recent white paper written by the Concurrent Engineering Working Group, which details the unique challenges of distributed collaborative concurrent engineering. This paper includes a short history of aerospace concurrent engineering, and defines the terms 'concurrent', 'collaborative' and 'distributed' in the context of aerospace concurrent engineering. In addition, a model for the levels of complexity of concurrent engineering teams is presented to provide a way to conceptualize information and data flow within these types of teams.

Direct Final Rule for Control of Air Pollution From Aircraft and Aircraft Engines; Emission Standards and Test Procedures

Science.gov (United States)

This rule will adopt the current voluntary NOx and CO emissions standards of the United Nations International Civil Aviation Organization (ICAO), bringing the United States aircraft standards into alignment with the international standards.

The enterprise engineering domain

CSIR Research Space (South Africa)

De Vries, M

2015-06-01

Full Text Available Enterprise engineering (EE) is emerging as a new discipline to address the design of the enterprise in a holistic way. Although existing knowledge on enterprise design is dispersed and fragmented across different disciplines and approaches, previous...

Performance based regulation - The maintenance rule

Energy Technology Data Exchange (ETDEWEB)

Correia, Richard P. [NRR/DOTS/TQMP, U.S. Nuclear Regulatory Commission, Office of Nuclear Reactor Regulation, M/S OWFN 10A19, Washington, D.C. 20555 (United States)

1997-07-01

The U.S. Nuclear Regulatory Commission has begun a transition from 'process-oriented' to 'results-oriented' regulations. The maintenance rule is a results-oriented rule that mandates consideration of risk and plant performance. The Maintenance Rule allows licensees to devise the most effective and efficient means of achieving the results described in the rule including the use of Probabilistic Risk (or Safety) Assessments. The NRC staff conducted a series of site visits to evaluate implementation of the Rule. Conclusions from the site visits indicated that the results-oriented Maintenance Rule can be successfully implemented and enforced. (author)

Performance based regulation - The maintenance rule

International Nuclear Information System (INIS)

Correia, Richard P.

1997-01-01

The U.S. Nuclear Regulatory Commission has begun a transition from 'process-oriented' to 'results-oriented' regulations. The maintenance rule is a results-oriented rule that mandates consideration of risk and plant performance. The Maintenance Rule allows licensees to devise the most effective and efficient means of achieving the results described in the rule including the use of Probabilistic Risk (or Safety) Assessments. The NRC staff conducted a series of site visits to evaluate implementation of the Rule. Conclusions from the site visits indicated that the results-oriented Maintenance Rule can be successfully implemented and enforced. (author)

Persistent Rule-Following in the Face of Reversed Reinforcement Contingencies: The Differential Impact of Direct Versus Derived Rules.

Science.gov (United States)

Harte, Colin; Barnes-Holmes, Yvonne; Barnes-Holmes, Dermot; McEnteggart, Ciara

2017-11-01

Rule-governed behavior and its role in generating insensitivity to direct contingencies of reinforcement have been implicated in human psychological suffering. In addition, the human capacity to engage in derived relational responding has also been used to explain specific human maladaptive behaviors, such as irrational fears. To date, however, very little research has attempted to integrate research on contingency insensitivity and derived relations. The current work sought to fill this gap. Across two experiments, participants received either a direct rule (Direct Rule Condition) or a rule that involved a novel derived relational response (Derived Rule Condition). Provision of a direct rule resulted in more persistent rule-following in the face of competing contingencies, but only when the opportunity to follow the reinforced rule beforehand was relatively protracted. Furthermore, only in the Direct Rule Condition were there significant correlations between rule-compliance and stress. A post hoc interpretation of the findings is provided.

Association Rule Mining on Five Years of Motor Vehicle Crashes

Directory of Open Access Journals (Sweden)

Daher Jean Raymond

2016-01-01

Full Text Available Every year, road accidents kill more than a million people and injure more than 20 million worldwide. This paper aims to offer guidance on road safety and create awareness by pinpointing the major causes of traffic accidents. The study investigates motor vehicle crashes in the Genesee Finger Lakes Region of New York State. Frequency Pattern Growth algorithm is utilized to cultivate knowledge and create association rules to highlight the time and environment settings that cause the most catastrophic crashes. This knowledge can be used to warn drivers about the dangers of accidents, and how the consequences are worse given a specific context. For instance, a discovered rule from the data states that ‘most of the crashes occur between 12:00 pm and 6:00pm’; hence, it is suggested to modify existing navigation application to warn drivers about the increase in risk factor.

Verification of design rules for EUROFER under TBM operating conditions

International Nuclear Information System (INIS)

Sunyk, R.; Aktaa, J.

2007-01-01

The aim of the activity presented in this work is, firstly, an evaluation of existing design rules considered for austenitic steels exhibiting cycle-by-cycle hardening, in contrast to the reduced-activation ferritic-martensitic steels (RAFM), which soften under cyclic loading. Secondly, we are aimed in a definition of the range of operating temperatures and loads for the current design of the test blanket module (TBM). Results of cycling tests of the EUROFER 97 have been thereby used to adjust material parameters needed for an ABAQUS-own combined non-linear isotropic-kinematic hardening model. Furthermore, a visco-plastic material model considering material damage and implemented recently as an ABAQUS user material (UMAT) has been also applied for simulations. Some important design rules within the elastic route have been evaluated and their predictions have been compared to results of cyclic simulations using the advanced material models mentioned above

A new intuitionistic fuzzy rule-based decision-making system for an operating system process scheduler.

Science.gov (United States)

Butt, Muhammad Arif; Akram, Muhammad

2016-01-01

We present a new intuitionistic fuzzy rule-based decision-making system based on intuitionistic fuzzy sets for a process scheduler of a batch operating system. Our proposed intuitionistic fuzzy scheduling algorithm, inputs the nice value and burst time of all available processes in the ready queue, intuitionistically fuzzify the input values, triggers appropriate rules of our intuitionistic fuzzy inference engine and finally calculates the dynamic priority (dp) of all the processes in the ready queue. Once the dp of every process is calculated the ready queue is sorted in decreasing order of dp of every process. The process with maximum dp value is sent to the central processing unit for execution. Finally, we show complete working of our algorithm on two different data sets and give comparisons with some standard non-preemptive process schedulers.

"Chaos Rules" Revisited

Science.gov (United States)

Murphy, David

2011-01-01

About 20 years ago, while lost in the midst of his PhD research, the author mused over proposed titles for his thesis. He was pretty pleased with himself when he came up with "Chaos Rules" (the implied double meaning was deliberate), or more completely, "Chaos Rules: An Exploration of the Work of Instructional Designers in Distance Education." He…

Fuzzylot: a novel self-organising fuzzy-neural rule-based pilot system for automated vehicles.

Science.gov (United States)

Pasquier, M; Quek, C; Toh, M

2001-10-01

This paper presents part of our research work concerned with the realisation of an Intelligent Vehicle and the technologies required for its routing, navigation, and control. An automated driver prototype has been developed using a self-organising fuzzy rule-based system (POPFNN-CRI(S)) to model and subsequently emulate human driving expertise. The ability of fuzzy logic to represent vague information using linguistic variables makes it a powerful tool to develop rule-based control systems when an exact working model is not available, as is the case of any vehicle-driving task. Designing a fuzzy system, however, is a complex endeavour, due to the need to define the variables and their associated fuzzy sets, and determine a suitable rule base. Many efforts have thus been devoted to automating this process, yielding the development of learning and optimisation techniques. One of them is the family of POP-FNNs, or Pseudo-Outer Product Fuzzy Neural Networks (TVR, AARS(S), AARS(NS), CRI, Yager). These generic self-organising neural networks developed at the Intelligent Systems Laboratory (ISL/NTU) are based on formal fuzzy mathematical theory and are able to objectively extract a fuzzy rule base from training data. In this application, a driving simulator has been developed, that integrates a detailed model of the car dynamics, complete with engine characteristics and environmental parameters, and an OpenGL-based 3D-simulation interface coupled with driving wheel and accelerator/ brake pedals. The simulator has been used on various road scenarios to record from a human pilot driving data consisting of steering and speed control actions associated to road features. Specifically, the POPFNN-CRI(S) system is used to cluster the data and extract a fuzzy rule base modelling the human driving behaviour. Finally, the effectiveness of the generated rule base has been validated using the simulator in autopilot mode.

On the commutativity of charge superselection rules in standard quantum field theory

International Nuclear Information System (INIS)

Todorov, T.S.

1981-07-01

A concrete operator structure realization of charge superselection rules in the sense of Doplicher, Haag, Kastler and Roberts is discussed, based on a ''foliation'' of the sector in unitary equivalent ''subsectors''. It is particularly suited for nonabelian superselection rules (which exist e.g. in the presence of a nonabelian gauge symmetry group). Several equivalent characteristics of this case are given. They are interpreted in the nonabelian case as an indication of lack of physical information for a complete determination of the corresponding state vectors by the expectation values, or equivalently, as the appearance of ''hidden'' observables. Their possible qualification as usual observables is connected with breaking of the symmetry and the eventual introduction of new superselection rules and is also understood as a transition from an approximate to a full description of the physical system. So the symmetry here is a manifestation of an incomplete description, while the breaking of this symmetry (if physically admissible) corresponds to a fuller description. Elements from the language of fibre bundles are introduced. (author)

Development of Future Rule Curves for Multipurpose Reservoir Operation Using Conditional Genetic and Tabu Search Algorithms

Directory of Open Access Journals (Sweden)

Anongrit Kangrang

2018-01-01

Full Text Available Optimal rule curves are necessary guidelines in the reservoir operation that have been used to assess performance of any reservoir to satisfy water supply, irrigation, industrial, hydropower, and environmental conservation requirements. This study applied the conditional genetic algorithm (CGA and the conditional tabu search algorithm (CTSA technique to connect with the reservoir simulation model in order to search optimal reservoir rule curves. The Ubolrat Reservoir located in the northeast region of Thailand was an illustrative application including historic monthly inflow, future inflow generated by the SWAT hydrological model using 50-year future climate data from the PRECIS regional climate model in case of B2 emission scenario by IPCC SRES, water demand, hydrologic data, and physical reservoir data. The future and synthetic inflow data of reservoirs were used to simulate reservoir system for evaluating water situation. The situations of water shortage and excess water were shown in terms of frequency magnitude and duration. The results have shown that the optimal rule curves from CGA and CTSA connected with the simulation model can mitigate drought and flood situations than the existing rule curves. The optimal future rule curves were more suitable for future situations than the other rule curves.

18 CFR 39.10 - Changes to an Electric Reliability Organization Rule or Regional Entity Rule.

Science.gov (United States)

2010-04-01

... RULES CONCERNING CERTIFICATION OF THE ELECTRIC RELIABILITY ORGANIZATION; AND PROCEDURES FOR THE ESTABLISHMENT, APPROVAL, AND ENFORCEMENT OF ELECTRIC RELIABILITY STANDARDS § 39.10 Changes to an Electric... Reliability Organization Rule or Regional Entity Rule. 39.10 Section 39.10 Conservation of Power and Water...

Incremental Learning of Context Free Grammars by Parsing-Based Rule Generation and Rule Set Search

Science.gov (United States)

Nakamura, Katsuhiko; Hoshina, Akemi

This paper discusses recent improvements and extensions in Synapse system for inductive inference of context free grammars (CFGs) from sample strings. Synapse uses incremental learning, rule generation based on bottom-up parsing, and the search for rule sets. The form of production rules in the previous system is extended from Revised Chomsky Normal Form A→βγ to Extended Chomsky Normal Form, which also includes A→B, where each of β and γ is either a terminal or nonterminal symbol. From the result of bottom-up parsing, a rule generation mechanism synthesizes minimum production rules required for parsing positive samples. Instead of inductive CYK algorithm in the previous version of Synapse, the improved version uses a novel rule generation method, called ``bridging,'' which bridges the lacked part of the derivation tree for the positive string. The improved version also employs a novel search strategy, called serial search in addition to minimum rule set search. The synthesis of grammars by the serial search is faster than the minimum set search in most cases. On the other hand, the size of the generated CFGs is generally larger than that by the minimum set search, and the system can find no appropriate grammar for some CFL by the serial search. The paper shows experimental results of incremental learning of several fundamental CFGs and compares the methods of rule generation and search strategies.

Analysis and minimization of overtraining effect in rule-based classifiers for computer-aided diagnosis

International Nuclear Information System (INIS)

Li Qiang; Doi Kunio

2006-01-01

Computer-aided diagnostic (CAD) schemes have been developed to assist radiologists detect various lesions in medical images. In CAD schemes, classifiers play a key role in achieving a high lesion detection rate and a low false-positive rate. Although many popular classifiers such as linear discriminant analysis and artificial neural networks have been employed in CAD schemes for reduction of false positives, a rule-based classifier has probably been the simplest and most frequently used one since the early days of development of various CAD schemes. However, with existing rule-based classifiers, there are major disadvantages that significantly reduce their practicality and credibility. The disadvantages include manual design, poor reproducibility, poor evaluation methods such as resubstitution, and a large overtraining effect. An automated rule-based classifier with a minimized overtraining effect can overcome or significantly reduce the extent of the above-mentioned disadvantages. In this study, we developed an 'optimal' method for the selection of cutoff thresholds and a fully automated rule-based classifier. Experimental results performed with Monte Carlo simulation and a real lung nodule CT data set demonstrated that the automated threshold selection method can completely eliminate overtraining effect in the procedure of cutoff threshold selection, and thus can minimize overall overtraining effect in the constructed rule-based classifier. We believe that this threshold selection method is very useful in the construction of automated rule-based classifiers with minimized overtraining effect

Rules Extraction with an Immune Algorithm

Directory of Open Access Journals (Sweden)

Deqin Yan

2007-12-01

Full Text Available In this paper, a method of extracting rules with immune algorithms from information systems is proposed. Designing an immune algorithm is based on a sharing mechanism to extract rules. The principle of sharing and competing resources in the sharing mechanism is consistent with the relationship of sharing and rivalry among rules. In order to extract rules efficiently, a new concept of flexible confidence and rule measurement is introduced. Experiments demonstrate that the proposed method is effective.

Enhancing the DEMO divertor target by interlayer engineering

Energy Technology Data Exchange (ETDEWEB)

Barrett, T.R., E-mail: tom.barrett@ccfe.ac.uk [CCFE, Culham Science Centre, Oxfordshire OX14 3DB (United Kingdom); McIntosh, S.C.; Fursdon, M.; Hancock, D.; Timmis, W.; Coleman, M. [CCFE, Culham Science Centre, Oxfordshire OX14 3DB (United Kingdom); Rieth, M.; Reiser, J. [Karlsruhe Institute for Technology, IMF-I, D-7602 Karlsruhe (Germany)

2015-10-15

Highlights: • The European ‘near-term’ DEMO forsees a water-cooled divertor. • Divertor targets typically use an interlayer between the armour and structure. • Engineering the properties of the interlayer can yield large gains in performance. • A response surface based design search and optimisation method is used. • A new design passes linear-elastic code rules up to applied heat flux of 18 MW/m{sup 2}. - Abstract: A robust water-cooled divertor target plate solution for DEMO has to date remained elusive. Common to all contemporary concepts is an interlayer at the boundary between the tungsten armour and the cooling structure. In this paper we show by design optimisation that an effectively designed interlayer can produce dramatic gains in power handling. By engineering the interlayer as part of the design study, it is found that divertor performance is enhanced by either a low conductivity ‘Thermal Break’ interlayer or an ‘Ultra-Compliant’ interlayer. For a 10 MW/m{sup 2} surface heat flux we find that a thermal conductivity of 15 W/mK and elastic modulus of 1 GPa are effective. A design is proposed which passes linear-elastic code rules up to an applied heat flux of 18 MW/m{sup 2}.

Enhancing the DEMO divertor target by interlayer engineering

International Nuclear Information System (INIS)

Barrett, T.R.; McIntosh, S.C.; Fursdon, M.; Hancock, D.; Timmis, W.; Coleman, M.; Rieth, M.; Reiser, J.

2015-01-01

Highlights: • The European ‘near-term’ DEMO forsees a water-cooled divertor. • Divertor targets typically use an interlayer between the armour and structure. • Engineering the properties of the interlayer can yield large gains in performance. • A response surface based design search and optimisation method is used. • A new design passes linear-elastic code rules up to applied heat flux of 18 MW/m"2. - Abstract: A robust water-cooled divertor target plate solution for DEMO has to date remained elusive. Common to all contemporary concepts is an interlayer at the boundary between the tungsten armour and the cooling structure. In this paper we show by design optimisation that an effectively designed interlayer can produce dramatic gains in power handling. By engineering the interlayer as part of the design study, it is found that divertor performance is enhanced by either a low conductivity ‘Thermal Break’ interlayer or an ‘Ultra-Compliant’ interlayer. For a 10 MW/m"2 surface heat flux we find that a thermal conductivity of 15 W/mK and elastic modulus of 1 GPa are effective. A design is proposed which passes linear-elastic code rules up to an applied heat flux of 18 MW/m"2.

Tissue Engineering Stem Cells – An e-Governance Strategy

Science.gov (United States)

Grange, Simon

2011-01-01

The rules of governance are changing. They are necessarily becoming more stringent as interventions offered to treat conditions carry unpredictable side effects, often associated with novel therapeutic vectors. The clinical relevance of this relates to the obligations of those involved in research, to ensure the best protection for subjects whilst encouraging the development of the field. Existing evidence supports the concept of e-Governance both in operational health research and more broadly in the strategic domain of policy formation. Building on the impact of the UK Comprehensive Research Network and recent EU Directives, it is now possible to focus on the issues of regulation for cell therapies in musculoskeletal science through the development of the Advanced Therapeutic Medicinal Products (ATMP) category of research products. This article reviews the framework that has borne this and the need for more detailed Virtual Research Integration and Collaboration (VRIC) systems to ensure regulatory compliance. Technology research and development plans must develop in close association between tissue engineering and treating clinicians. The scope of this strategy relates to the handling of human tissues the transport and storage of specimens in accordance with current EU directives and the Human Tissue Authority (HTA) regulations. PMID:21886693

Mixed debris treatment at the Idaho National Engineering Laboratory (INEL)

International Nuclear Information System (INIS)

Garcia, E.C.; Porter, C.L.; Wallace, M.T.

1993-01-01

August 18, 1992 the EPA published the final revised treatment standards for hazardous debris, including mixed debris. Whereas previous standards had been concentration based, the revised standards are performance based. Debris must be treated prior to land disposal, using specific technologies from one or more of the following families of debris treatment technologies: Extraction, destruction, or immobilization. Seventeen specific technologies with generic application are discussed in the final rule. The existing capabilities and types of debris at the INEL were evaluated against the debris rule to determine an overall treatment strategy for the INEL. Seven types of debris were identified: Combustible, porous, non-porous, inherently hazardous, HEPA filters, asbestos contaminated, and reactive metals contaminated debris. With the exception of debris contaminated with reactive metals treatment can be achieved utilizing existing facilities coupled with minor modifications

Proof Rules for Recursive Procedures

NARCIS (Netherlands)

Hesselink, Wim H.

1993-01-01

Four proof rules for recursive procedures in a Pascal-like language are presented. The main rule deals with total correctness and is based on results of Gries and Martin. The rule is easier to apply than Martin's. It is introduced as an extension of a specification format for Pascal-procedures, with

Rules Versus Discretion in Monetary Policy

OpenAIRE

Stanley Fischer

1988-01-01

This paper examines the case for rules rather than discretion in the conduct of monetary policy, from both historical and analytic perspectives. The paper starts with the rules of the game under the gold standard. These rules were ill-defined and not adhered to; active discretionary policy was pursued to defend the gold standard -- but the gold standard came closer to a regime of rules than the current system. The arguments for rules in general developed by Milton Friedman are described mo ap...

Hydraulic and Condition Assessment of Existing Sewerage Network: A Case Study of an Educational Institute

Science.gov (United States)

Sourabh, Nishant; Timbadiya, P. V.

2018-04-01

The hydraulic simulation of the existing sewerage network provides various information about critical points to assess the deteriorating condition and help in rehabilitation of existing network and future expansion. In the present study, hydraulic and condition assessment of existing network of educational Institute (i.e. Sardar Vallabhbhai National Institute of Technology-Surat, Gujarat, India), having an area of 100 ha and ground levels in range of 5.0-9.0 m above mean sea level, has been carried out using sewage flow simulation for existing and future scenarios analysis using SewerGEMS v8i. The paper describes the features of 4.79 km long sewerage network of institute followed by network model simulation for aforesaid scenarios and recommendations on improvement of the existing network for future use. The total sewer loads for present and future scenarios are 1.67 million litres per day (MLD) and 3.62 MLD, considering the peak factor of 3 on the basis of population. The hydraulic simulation of the existing scenario indicated depth by diameter (d/D) ratio in the range of 0.02-0.48 and velocity range of 0.08-0.53 m/s for existing network for present scenario. For the future scenario, the existing network is needed to be modified and it was found that total of 11 conduits (length: 464.8 m) should be replaced to the next higher diameter available, i.e., 350 mm for utilization of existing network for future scenario. The present study provides the methodology for condition assessment of existing network and its utilization as per guidelines provided by Central Public Health and Environmental Engineering Organization, 2013. The methodology presented in this paper can be used by municipal/public health engineer for the assessment of existing sewerage network for its serviceability and improvement in future.

Rule Making and Rule Breaking: Game Development and the Governance of Emergent Behaviour