WorldWideScience

Sample records for evolution iii polymerization

  1. Iron(III) chelating resins. VI. Stability constants of iron(III)-ligand complexes on insoluble polymeric matrices

    NARCIS (Netherlands)

    Feng, M.H.; Feng, Minhua; van der Does, L.; Bantjes, A.; Bantjes, Adriaan

    1995-01-01

    A method is presented for the determination of stability constants of iron(III)-ligand complexes on insoluble polymeric matrices based on a competition chelation reaction for iron(III) of the resin with a soluble chelator. Stability constants (K') were calculated for iron(III)-ligand complexes on

  2. Polymerization of Ethylene Catalyzed by Vanadium(III Complexes

    Directory of Open Access Journals (Sweden)

    Hamdi Ali Elagab

    2017-07-01

    Full Text Available Thirty five  complexes of 1,2- bis(benzimidazole, benzothiazole and benzoxazolebenzene,  1,2-bis(benzimidazole, benzothiazole and benzoxazole-4-methyl-benzene, 1,2-bis  (benzimidazole, benzothiazole and benzoxazole4-bromobenzene, 1, 2-bis(benzimidazole, benzothiazole and benzoxazole 4- chlorobenzene,  and 2, 6-bis(benzimidazole, benzothiazole and benzoxazole pyridine compounds with V (III metal centers were synthesized, characterized, activated with methylalumoxane (MAO and then tested for catalytic ethylene polymerization. The catalysts generally show moderate to good activities compared to the benchmark catalyst Cp2ZrCl2. The activities of the various catalysts were found to be function of the hetero atoms in the ligand frameworks and also strongly influenced by the bridging unit of the ligand. The highest activity was obtained with 36 / MAO (442 kg PE / mol cat. h. The produced polyethylenes showed high molecular weights (up to 2.7 × 106 g/mol and broad molecular weight distributions (PD = 1.4 - 16.6. Thermal analysis of polyethylenes produced with vanadium complexes revealed that the catalyst systems were capable to produce high density polyethylenes with melting temperatures > 135 °C and crystallization temperatures range from 117-120 °C with high degree of crystallinity. DOI: http://dx.doi.org/10.17807/orbital.v9i3.985 

  3. Controlled radical polymerization mediated by amine-bis(phenolate) iron(III) complexes.

    Science.gov (United States)

    Allan, Laura E N; MacDonald, Jarret P; Reckling, Amy M; Kozak, Christopher M; Shaver, Michael P

    2012-03-16

    Tetradentate amine-bis(phenolate) iron(III) halide complexes containing chloro substituents on the aromatic ring are extremely efficient catalysts for controlled radical polymerization. Molecular weights are in good agreement with theoretical values and polydispersity indexes (PDIs) are as low as 1.11 for styrene and methyl methacrylate polymerizations. Complexes containing alkyl substituents on the aromatic ring are less efficient. Kinetic data reveal activity for styrene polymerization among the fastest reported to date and initial studies implicate a multimechanism system. Despite the highly colored polymerization media, simple work-up procedures yield pure white polymers. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Galapagos III World Evolution Summit: why evolution matters.

    Science.gov (United States)

    Paz-Y-Miño-C, Guillermo; Espinosa, Avelina

    There is no place on Earth like the Galapagos Islands and no better destination to discuss the reality of evolution. Under the theme 'Why Does Evolution Matter', the University San Francisco of Quito (USFQ), Ecuador, and its Galapagos Institute for the Arts and Sciences (GAIAS), organized the III World Evolution Summit in San Cristóbal Island. The 200-attendee meeting took place on 1 to 5 June 2013; it included 12 keynote speakers, 20 oral presentations by international scholars, and 31 posters by faculty, postdocs, and graduate and undergraduate students. The Summit encompassed five sessions: evolution and society, pre-cellular evolution and the RNA world, behavior and environment, genome, and microbes and diseases. USFQ and GAIAS launched officially the Lynn Margulis Center for Evolutionary Biology and showcased the Galapagos Science Center, in San Cristóbal, an impressive research facility conceptualized in partnership with the University of North Carolina at Chapel Hill, USA. USFQ and GAIAS excelled at managing the conference with exceptional vision and at highlighting the relevance of Galapagos in the history of modern evolutionary thinking; Charles Darwin's visit to this volcanic archipelago in 1835 unfolded unprecedented scientific interest in what today is a matchless World Heritage.

  5. A direct proofreader-clamp interaction stabilizes the Pol III replicase in the polymerization mode

    KAUST Repository

    Jergic, Slobodan

    2013-02-22

    Processive DNA synthesis by the αÉ"θ core of the Escherichia coli Pol III replicase requires it to be bound to the β 2 clamp via a site in the α polymerase subunit. How the É" proofreading exonuclease subunit influences DNA synthesis by α was not previously understood. In this work, bulk assays of DNA replication were used to uncover a non-proofreading activity of É". Combination of mutagenesis with biophysical studies and single-molecule leading-strand replication assays traced this activity to a novel β-binding site in É" that, in conjunction with the site in α, maintains a closed state of the αÉ"θ-β 2 replicase in the polymerization mode of DNA synthesis. The É"-β interaction, selected during evolution to be weak and thus suited for transient disruption to enable access of alternate polymerases and other clamp binding proteins, therefore makes an important contribution to the network of protein-protein interactions that finely tune stability of the replicase on the DNA template in its various conformational states. © 2013 European Molecular Biology Organization.

  6. The evolution of supermassive Population III stars

    Science.gov (United States)

    Haemmerlé, Lionel; Woods, T. E.; Klessen, Ralf S.; Heger, Alexander; Whalen, Daniel J.

    2018-02-01

    Supermassive primordial stars forming in atomically cooled haloes at z ˜ 15-20 are currently thought to be the progenitors of the earliest quasars in the Universe. In this picture, the star evolves under accretion rates of 0.1-1 M⊙ yr-1 until the general relativistic instability triggers its collapse to a black hole at masses of ˜105 M⊙. However, the ability of the accretion flow to sustain such high rates depends crucially on the photospheric properties of the accreting star, because its ionizing radiation could reduce or even halt accretion. Here we present new models of supermassive Population III protostars accreting at rates 0.001-10 M⊙ yr-1, computed with the GENEVA stellar evolution code including general relativistic corrections to the internal structure. We compute for the first time evolutionary tracks in the mass range M > 105 M⊙. We use the polytropic stability criterion to estimate the mass at which the collapse occurs, which has been shown to give a lower limit of the actual mass at collapse in recent hydrodynamic simulations. We find that at accretion rates higher than 0.01 M⊙ yr-1, the stars evolve as red, cool supergiants with surface temperatures below 104 K towards masses >105 M⊙. Moreover, even with the lower rates 0.001 M_{⊙} yr{^{-1}}origin of the first quasars. We provide numerical tables for the surface properties of our models.

  7. Nanocrystalline Axially Bridged Iron Phthalocyanine Polymeric Conductor: (μ-Thiocyanato(phthalocyaninatoiron(III

    Directory of Open Access Journals (Sweden)

    Eiza Shimizu

    2016-01-01

    Full Text Available Skewered Iron(III phthalocyanine conducting polymer can be constructed with the utilization of axial thiocyanato ligands ((μ-thiocyanato(phthalocyaninatoiron(III; (FeIII(Pc(SCNn thereby creating additional avenues for electron transport through a linear SCN bridge, apart from the intermolecular π-π orbital overlap between the Pc molecules. In this paper, we report on the conversion of bulk FeIII(Pc(SCNn polymeric organic conductor into crystalline nanostructures through horizontal vapor phase growth process. The needle-like nanostructures are deemed to provide more ordered and, thus, more π-π interactive interskewer FeIII(Pc(SCNn polymer orientation, resulting in a twofold increase of its electrical conductivity per materials density unit.

  8. Poly(dendrimers) with phosphorescent iridium(III) complex-based side chains prepared via ring-opening metathesis polymerization

    NARCIS (Netherlands)

    Lai, W.-Y.; Balfour, M.N.; Levell, J.W.; Bansal, A.K.; Burn, P.L.; Lo, S.-C.; Samuel, I.D.W.

    2012-01-01

    Phosphorescent poly(dendrimers) with a norbornene-derived backbone have been synthesized using ring-opening metathesis polymerization with the Grubbs III catalyst. The dendrimers are comprised of a heteroleptic iridium(III) complex core with two 2-phenylpyridyl ligands and a phenyltriazolyl ligand,

  9. Complexation of Eu(III) with a polymeric cement additive as a potential carrier of actinides

    Energy Technology Data Exchange (ETDEWEB)

    Lippold, Holger; Becker, Michael [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Reactive Transport

    2017-06-01

    In the long term, cementitious materials in a final repository will be exposed to leaching processes generating highly alkaline solutions. Polymeric additives, so-called superplasticizers, are considered as potential mobilizing agents for released radionuclides, since it is uncertain whether complete degradation will take place under the evolving aqueous conditions. Regarding the complexing properties of superplasticizers, there are only indirect assessments so far. In this study, first systematic investigations on complexation with Eu(III) as an analogue of trivalent actinides were performed at variable pH and electrolyte content (NaCl, CaCl{sub 2}) using ultrafiltration as a separation method. A stability constant was derived according to the charge neutralization model. For this purpose, the proton exchange capacity was determined by potentiometric titration.

  10. Radical polymerization of styrene controlled by half-sandwich Mo(III)/Mo(IV) couples: all basic mechanisms are possible.

    Science.gov (United States)

    Le Grognec, E; Claverie, J; Poli, R

    2001-10-03

    Density functional calculations of bond dissociation energies (BDEs) have been used as a guide to the choice of metal system suitable for controlling styrene polymerization by either the stable free radical polymerization (SFRP) or the atom transfer radical polymerization (ATRP) mechanism. In accord with the theoretical prediction, CpMo(eta(4)-C(4)H(6))(CH(2)SiMe(3))(2), 2, is not capable of yielding SFRP of styrene. Still in accord with theoretical prediction, CpMo(eta(4)-C(4)H(6))Cl(2), 1, CpMo(PMe(3))(2)Cl(2), 3, and CpMo(dppe)Cl(2) (dppe = 1,2-bis(diphenylphosphino)ethane), 4, yield controlled styrene polymerization by the SFRP mechanism in the presence of 2,2'-azobisisobutyronitrile (AIBN). This arises from the generation of a putative Mo(IV) alkyl species from the AIBN-generated radical addition to the Mo(III) compound. The controlled nature of the polymerizations is indicated by linear M(n) progression with the conversion in all cases and moderate polydispersity indices (PDIs). Controlled polymerization of styrene is also given by compounds 3 and 4 in combination with alkyl bromides. These complexes then operate by the ATRP mechanism, again in accord with the theoretical predictions. Controlled character is revealed by linear increase of M(n) versus conversion, low PDIs, a stop-and-go experiment, and (1)H NMR and MALDI-TOF analyses of the polymer end groups. The same controlled polymerization is given by a "reverse" ATRP experiment, starting from AIBN and CpMo(PMe(3))(2)Cl(2)Br, 5. On the other hand, when compound 1 or 2 is used in combination with an alkyl bromide (as for an ATRP experiment), the isolated polystyrene shows by M(n), (1)H NMR, and MALDI-TOF analyses that catalytic chain transfer (CCT) radical polymerization takes place in this case. Kinetics simulations underscore the conditions regulating the radical polymerization mechanism and the living character of the polymerization. The complexes herein described are ineffective at controlling the

  11. Effects of Fe(III) on biofilm and its extracellular polymeric substances (EPS) in fixed bed biofilm reactors.

    Science.gov (United States)

    Hu, Xuewei; Chen, Kai; Lai, Xinke; Ji, Siping; Kaiser, Kevin

    2016-01-01

    The effects of Fe(III) on the biofilm mass and activity, the biofilm micromorphology as well as the composition and functional groups characteristics of extracellular polymeric substances (EPS) in biofilm were investigated in laboratory-scale fixed bed biofilm reactors. The results showed that 2 mg/L of Fe(III) promoted the biofilm mass and improved the biofilm activity, but 16 mg/L of Fe(III) adversely affected biofilm development. Scanning electron microscopy (SEM) study indicated a high concentration (16 mg/L) of Fe(III) led to significant reduction of the filaments, great promotion of the EPS secretion in biofilm. The result of the EPS composition suggested 2 mg/L of Fe(III) increased soluble EPS and loosely bound EPS which contributed to the microbial aggregation, while 16 mg/L of Fe(III) promoted tightly bound EPS production unfavourable for substrate mass transfer. Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy analysis demonstrated that Fe(III) exerted a significant influence on the -CONH- groups of proteins and the C-O groups of polysaccharides in EPS. This study reveals that Fe(III) influences biofilm development and activity not only by directly impacting the microbial physiology but by indirectly affecting the EPS constituents, and it helps to provide theoretical guidance for iron ion containing wastewater treatment.

  12. Polymeric trileaflet prosthetic heart valves: evolution and path to clinical reality

    Science.gov (United States)

    Claiborne, Thomas E; Slepian, Marvin J; Hossainy, Syed; Bluestein, Danny

    2013-01-01

    Present prosthetic heart valves, while hemodynamically effective, remain limited by progressive structural deterioration of tissue valves or the burden of chronic anticoagulation for mechanical valves. An idealized valve prosthesis would eliminate these limitations. Polymeric heart valves (PHVs), fabricated from advanced polymeric materials, offer the potential of durability and hemocompatibility. Unfortunately, the clinical realization of PHVs to date has been hampered by findings of in vivo calcification, degradation and thrombosis. Here, the authors review the evolution of PHVs, evaluate the state of the art of this technology and propose a pathway towards clinical reality. In particular, the authors discuss the development of a novel aortic PHV that may be deployed via transcatheter implantation, as well as its optimization via device thrombogenicity emulation. PMID:23249154

  13. Ethylene polymerization by PN3-type pincer chromium(III) complexes

    KAUST Repository

    Gong, Dirong

    2014-12-01

    Chromium (III) complexes, Cr1, [2,6-(tBu2PNH) 2C5H4N]CrCl3; Cr2, [2,6-(Ph 2PNH)2C5H4N]CrCl3; Cr3, [2-(tBu2PNH)C5H4N]CrCl3 THF; Cr4, [6-(tBu2PNH)C5H4N-2- CH2NEt2]CrCl3; Cr5, [6-(tBu 2PNH)C5H4N-2-C3H2N 2]CrCl3; Cr6, [6-(tBu2PNH)C 5H4N-2-(3,5-Me2)C3H 2N2]CrCl3; Cr7, [6-(tBu 2PNH)C5H4N-2-(3,5-iPr 2)C3H2N2]CrCl3; Cr8, [6-(tBu2PNH)C5H4N-2-(3,5-Ph 2)C3H2N2]CrCl3, bearing a family of neutral PN3-type pincer ligands have been prepared. The molecular structure of Cr2 was further elucidated by the X-ray crystallographic analysis, showing an octahedral geometry. Treatment of these complexes with MAO or alkylaluminum led to catalysts with moderate activities (about 105 g (PE)/Cr(mol) h) for ethylene polymerization, affording exclusively linear low molecular weight solid PE without any detectable oligomers. Among Cr1-Cr8, the highest activity was achieved for Cr1/MAO at room temperature with production of PE with highest molecular weight, indicating that replacement of both tBu groups in Cr1 with Ph groups, or one PtBu2 with the N (imine) arm, resulted in a lower catalytic activity and lower M w. © 2014 Elsevier B.V.

  14. Polymeric optical sensors for selective and sensitive nitrite detection using cobalt(III) corrole and rhodium(III) porphyrin as ionophores

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Si; Wo, Yaqi; Meyerhoff, Mark E., E-mail: mmeyerho@umich.edu

    2014-09-16

    Highlights: • We examine cobalt(III) corroles and rhodium(III) porphyrins as ionophores in polymeric films for optical sensors to detect nitrite. • Different types of proton chromoionophores are evaluated to optimize nitrite response. • Selectivity over lipophilic anions such as perchlorate and thiocyanate is observed. • Both ionophores yield optical sensors that are fully reversible. • The cobalt(III) corrole based sensor is employed to determine nitric oxide emission rates from NO donor doped polymers with good accuracy. - Abstract: Cobalt(III) 5,10,15-tris(4-tert-butylphenyl) corrole with a triphenylphosphine axial ligand and rhodium(III) 5,10,15,20-tetra(p-tert-butylphenyl) porphyrin are incorporated into plasticized poly(vinyl chloride) films to fabricate nitrite-selective bulk optodes via absorbance measurements. The resulting films yield sensitive, fast and fully reversible response toward nitrite with significantly enhanced nitrite selectivity over other anions including lipophilic anions such as thiocyanate and perchlorate. The selectivity patterns differ greatly from the Hofmeister series based on anion lipophilicity and are consistent with selectivity obtained with potentiometric sensors based on the same ionophores. The optical nitrite sensors are shown to be useful for detecting rates of emission of nitric oxide (NO) from NO releasing polymers containing S-nitroso-N-acetyl-DL-penicillamine.

  15. Polymeric membrane electrodes with high nitrite selectivity based on rhodium(III) porphyrins and salophens as ionophores.

    Science.gov (United States)

    Pietrzak, Mariusz; Meyerhoff, Mark E

    2009-05-01

    Several porphyrin and salophen complexes with Rh(III) are examined as ionophores to prepare nitrite selective polymeric membrane electrodes. All ionophores tested exhibit preferred selectivity toward nitrite anion. Enhanced potentiometric nitrite selectivity is observed in the presence of either lipophilic anionic as well as cationic sites within the membranes, suggesting that the ionophores can function via either a charged or a neutral carrier response mechanism. Among a range of complexes and membrane formulations examined, optimal nitrite selectivity and reversible response down to 5 x 10(-6) M is achieved using Rh(III)-tetra(t-butylphenylporphyrin) as the ionophore in the presence of lipophilic cationic sites in plasticized poly(vinyl chloride) membrane. Response times are substantially longer than typical membrane electrodes apparently because of a slow nitrite ligation reaction with Rh(III); however, a significant improvement in dynamic EMF response can be realized by optimizing the membrane formulation and increasing the temperature. The selectivity observed with these membranes is greater than the best nitrite selective electrodes reported to date in the literature based on lipophilic Co(III)-corrin complexes, allowing the new nitrite electrodes to be utilized to determine the level of nitrite in meats with good correlation to the colorimetric Griess assay method.

  16. Polymeric membrane electrodes with improved fluoride selectivity and lifetime based on Zr(IV)- and Al(III)-tetraphenylporphyrin derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Pietrzak, Mariusz [Warsaw University of Technology, Faculty of Chemistry, Department of Analytical Chemistry, 00-664 Warsaw (Poland); Meyerhoff, Mark E. [University of Michigan, Department of Chemistry, Ann Arbor, MI 48109 (United States); Malinowska, Elzbieta [Warsaw University of Technology, Faculty of Chemistry, Department of Analytical Chemistry, 00-664 Warsaw (Poland)]. E-mail: ejmal@ch.pw.edu.pl

    2007-07-23

    Novel aluminum(III)- and zirconium(IV)-tetraphenylporhyrin (TPP) derivatives are examined as fluoride-selective ionophores for preparing polymer membrane-based ion-selective electrodes (ISEs). The influence of t-butyl- or dichloro-phenyl ring substituents as well as the nature of the metal ion center (Al(III) versus Zr(IV)) on the anion complexation constants of TPP derivative ionophores are reported. The anion binding stability constants of the ionophores are characterized by the so-called 'sandwich membrane' method. All of the metalloporphyrins examined form their strongest anion complexes with fluoride. The influence of plasticizer as well as the type of lipophilic ionic site additive and their amounts in the sensing membrane are discussed. It is shown that membrane electrodes formulated with the metalloporphyrin derivatives and appropriate anionic or cationic additives exhibit enhanced potentiometric response toward fluoride over all other anions tested. Since selectivity toward fluoride is enhanced in the presence of both anionic and cationic additives, the metalloporphyrins can function as either charged or neutral carriers within the organic membrane phase. In contrast to previously reported fluoride-selective polymeric membrane electrodes based on metalloporphyrins, nernstian or near-nernstian (-51.2 to -60.1 mV decade{sup -1}) as well as rapid (t < 80 s) and fully reversible potentiometric fluoride responses are observed. Moreover, use of aluminum(III)-t-butyltetraphenylporphyrin as the ionophore provides fluoride sensors with prolonged (7 months) functional lifetime.

  17. Fluoride-selective polymeric membrane electrodes based on Zr(IV)- and Al(III)-salen ionophores of various structures.

    Science.gov (United States)

    Górski, Łukasz; Matusevich, Alexey; Parzuchowski, Paweł; Łuciuk, Iwona; Malinowska, Elzbieta

    2010-04-14

    Al(III)- and Zr(IV)-salophens of novel structures were tested as anion-selective ionophores. It was shown that these compounds are highly selective to fluoride and give selectivity greatly deviating from classical Hofmeister pattern, when doped into the polymeric membrane of ion-selective electrode (ISE). The following selectivity sequence has been recorded for both ionophores: F(-) > ClO(4)(-) > SCN(-) > NO(3)(-) approximately Br(-) approximately Cl(-). The results of potentiometric and spectrophotometric measurements allow to conclude that the nature and structure of salophen ligands influence stability of ISE working parameters. An increase in salophen ligands lipophilicity results in prolongation of the ISE lifetime, most likely due to slower ionophore decomposition caused by the hydrolysis of imine bonds in salophen structure. Ion-selective electrodes (ISEs) with the most successful Al(III)-salophen exhibited a stable, fast and near-Nernstian fluoride response and a functional lifetime near 3 weeks and selectivity coefficients with log K(F(-), Y(-))(pot) as follows: -2.8 (Y(-)=Br(-)), -2.7 (Cl(-)), -2.8 (NO(3)(-)), -1.5 (SCN(-)), -1.3 (ClO(4)(-)), which is better than for other ones based on Zr(IV)- and Al(III)-salophens and salens described to date. Copyright 2010 Elsevier B.V. All rights reserved.

  18. Synthesis and luminescence properties of polymeric complexes of Cu(II), Zn(II) and Al(III) with 8-hydroxyquinoline side group-containing polystyrene

    Science.gov (United States)

    Gao, Baojiao; Wei, Xiaopeng; Zhang, Yanyan

    2013-01-01

    Three kinds of metalloquinolate-containing polystyrene were prepared via a polymer reaction and a coordination reaction. 5-Chloromethyl-8-hydroxyquinoline (CHQ) was first prepared through the chloromethylation reaction of 8-hydroxyquinoline (HQ) with 1,4-bichloromethoxy-butane as chloromethylation reagent. A polymer reaction, Friedel-Crafts alkylation reaction, was carried out between polystyrene (PS) and CHQ in the presence of Lewis catalyst, and HQ was bonded onto the side chains of PS, obtaining 8-hydroxyquinoline-functionalized Polystyrene, HQ-PS. And then, by using one-pot method with two-stage procedures, the coordination reaction of HQ-PS and small molecule HQ with metal ions including Al(III), Zn(II) and Cu(II) ions, was allowed to be carried out, and three polymeric metalloquinolates, AlQ3-PS, ZnQ2-PS and CuQ2-PS, were successfully prepared, respectively. In the chemical structures of these polymeric metalloquinolates, metalloquinolates were chemically attached onto the side chains of PS. HQ-PS and three polymeric metalloquinolates were fully characterized by FTIR, 1H NMR and TGA. The luminescence properties of the three polymeric metalloquinolates were mainly investigated by UV/Vis absorption spectra and fluorescence emission spectra in solutions and in solid film states. When excited by the ray at about 365 nm, the three polymeric metalloquinolates have blue-green luminescence, and the main emission peaks in the DMF solutions are located at 490, 482 and 502 nm for AlQ3-PS, ZnQ2-PS and CuQ2-PS, respectively. As compared with their emissions in solutions, the emissions in solid film states are red-shifted to some extent, and the main emission peaks are located at 500, 488 and 510 nm for AlQ3-PS, ZnQ2-PS and CuQ2-PS, respectively. Besides, these polymeric metalloquinolates have higher thermal stability than PS as polymeric skeleton.

  19. Intrinsic coupling of near-tip matrix crack formation to mode III delamination advance in laminated polymeric matrix composites

    National Research Council Canada - National Science Library

    Johnston, A.L; Davidson, B.D

    2014-01-01

    .... It is found that this represents an intrinsically coupled sequence of events for anti-plane shear loading of continuous fiber laminated polymeric composites when a preexisting delamination is bounded...

  20. Evolution of dengue virus type 3 genotype III in Venezuela: diversification, rates and population dynamics.

    Science.gov (United States)

    Ramírez, Alvaro; Fajardo, Alvaro; Moros, Zoila; Gerder, Marlene; Caraballo, Gerson; Camacho, Daria; Comach, Guillermo; Alarcón, Victor; Zambrano, Julio; Hernández, Rosa; Moratorio, Gonzalo; Cristina, Juan; Liprandi, Ferdinando

    2010-11-18

    Dengue virus (DENV) is a member of the genus Flavivirus of the family Flaviviridae. DENV are comprised of four distinct serotypes (DENV-1 through DENV-4) and each serotype can be divided in different genotypes. Currently, there is a dramatic emergence of DENV-3 genotype III in Latin America. Nevertheless, we still have an incomplete understanding of the evolutionary forces underlying the evolution of this genotype in this region of the world. In order to gain insight into the degree of genetic variability, rates and patterns of evolution of this genotype in Venezuela and the South American region, phylogenetic analysis, based on a large number (n = 119) of envelope gene sequences from DENV-3 genotype III strains isolated in Venezuela from 2001 to 2008, were performed. Phylogenetic analysis revealed an in situ evolution of DENV-3 genotype III following its introduction in the Latin American region, where three different genetic clusters (A to C) can be observed among the DENV-3 genotype III strains circulating in this region. Bayesian coalescent inference analyses revealed an evolutionary rate of 8.48 x 10⁻⁴ substitutions/site/year (s/s/y) for strains of cluster A, composed entirely of strains isolated in Venezuela. Amino acid substitution at position 329 of domain III of the E protein (A→V) was found in almost all E proteins from Cluster A strains. A significant evolutionary change between DENV-3 genotype III strains that circulated in the initial years of the introduction in the continent and strains isolated in the Latin American region in recent years was observed. The presence of DENV-3 genotype III strains belonging to different clusters was observed in Venezuela, revealing several introduction events into this country. The evolutionary rate found for Cluster A strains circulating in Venezuela is similar to the others previously established for this genotype in other regions of the world. This suggests a lack of correlation among DENV genotype III

  1. Mutualistic co-evolution of type III effector genes in Sinorhizobium fredii and Bradyrhizobium japonicum.

    Directory of Open Access Journals (Sweden)

    Jeffrey A Kimbrel

    2013-02-01

    Full Text Available Two diametric paradigms have been proposed to model the molecular co-evolution of microbial mutualists and their eukaryotic hosts. In one, mutualist and host exhibit an antagonistic arms race and each partner evolves rapidly to maximize their own fitness from the interaction at potential expense of the other. In the opposing model, conflicts between mutualist and host are largely resolved and the interaction is characterized by evolutionary stasis. We tested these opposing frameworks in two lineages of mutualistic rhizobia, Sinorhizobium fredii and Bradyrhizobium japonicum. To examine genes demonstrably important for host-interactions we coupled the mining of genome sequences to a comprehensive functional screen for type III effector genes, which are necessary for many Gram-negative pathogens to infect their hosts. We demonstrate that the rhizobial type III effector genes exhibit a surprisingly high degree of conservation in content and sequence that is in contrast to those of a well characterized plant pathogenic species. This type III effector gene conservation is particularly striking in the context of the relatively high genome-wide diversity of rhizobia. The evolution of rhizobial type III effectors is inconsistent with the molecular arms race paradigm. Instead, our results reveal that these loci are relatively static in rhizobial lineages and suggest that fitness conflicts between rhizobia mutualists and their host plants have been largely resolved.

  2. A New Vanadium (III Complex of 2,6-Bis(3,5-diphenylpyrazol-1-ylmethylpyridine as a Catalyst for Ethylene Polymerization

    Directory of Open Access Journals (Sweden)

    Hanna S. Abbo

    2013-04-01

    Full Text Available The tridentate ligand 2,6-bis(3,5-diphenylpyrazol-1-ylmethylpyridine, abbreviated as 2,6-[(3,5-ph2pz-CH22-py], a new pyridine-pyrazole derivative, was prepared from 2,6-bis(bromomethylpyridine and 3,5-diphenylpyrazole. The ligand was characterized by means of elemental analyses, ATR-IR, 1H- and 13C-NMR spectroscopy and single crystal X-ray crystallography. Using this ligand, a new mononuclear vanadium (III complex, {2,6-[(3,5-ph2pzCH2]2py}VCl3 was prepared and characterized by elemental analysis, ATR-IR and HR-MS. The complex was investigated as a catalyst for ethylene polymerization and compared with 2,6-[(3,5-Me2pzCH2]2py}VCl3 to explore the effect of the substituent on the pyrazolyl rings on ethylene polymerization. High catalytic activity was observed at ambient temperature. After treatment with AlEtCl2, these complexes showed high activity for ethylene polymerization converting ethylene to highly linear polyethylene and affording high molecular weight polymers (up to 1.0 × 106 g/mol with unimodal molecular weight distributions.

  3. Universal sequence replication, reversible polymerization and early functional biopolymers: a model for the initiation of prebiotic sequence evolution.

    Directory of Open Access Journals (Sweden)

    Sara Imari Walker

    Full Text Available Many models for the origin of life have focused on understanding how evolution can drive the refinement of a preexisting enzyme, such as the evolution of efficient replicase activity. Here we present a model for what was, arguably, an even earlier stage of chemical evolution, when polymer sequence diversity was generated and sustained before, and during, the onset of functional selection. The model includes regular environmental cycles (e.g. hydration-dehydration cycles that drive polymers between times of replication and functional activity, which coincide with times of different monomer and polymer diffusivity. Template-directed replication of informational polymers, which takes place during the dehydration stage of each cycle, is considered to be sequence-independent. New sequences are generated by spontaneous polymer formation, and all sequences compete for a finite monomer resource that is recycled via reversible polymerization. Kinetic Monte Carlo simulations demonstrate that this proposed prebiotic scenario provides a robust mechanism for the exploration of sequence space. Introduction of a polymer sequence with monomer synthetase activity illustrates that functional sequences can become established in a preexisting pool of otherwise non-functional sequences. Functional selection does not dominate system dynamics and sequence diversity remains high, permitting the emergence and spread of more than one functional sequence. It is also observed that polymers spontaneously form clusters in simulations where polymers diffuse more slowly than monomers, a feature that is reminiscent of a previous proposal that the earliest stages of life could have been defined by the collective evolution of a system-wide cooperation of polymer aggregates. Overall, the results presented demonstrate the merits of considering plausible prebiotic polymer chemistries and environments that would have allowed for the rapid turnover of monomer resources and for

  4. Terminal reassortment drives the quantum evolution of type III effectors in bacterial pathogens.

    Directory of Open Access Journals (Sweden)

    John Stavrinides

    2006-10-01

    Full Text Available Many bacterial pathogens employ a type III secretion system to deliver type III secreted effectors (T3SEs into host cells, where they interact directly with host substrates to modulate defense pathways and promote disease. This interaction creates intense selective pressures on these secreted effectors, necessitating rapid evolution to overcome host surveillance systems and defenses. Using computational and evolutionary approaches, we have identified numerous mosaic and truncated T3SEs among animal and plant pathogens. We propose that these secreted virulence genes have evolved through a shuffling process we have called "terminal reassortment." In terminal reassortment, existing T3SE termini are mobilized within the genome, creating random genetic fusions that result in chimeric genes. Up to 32% of T3SE families in species with relatively large and well-characterized T3SE repertoires show evidence of terminal reassortment, as compared to only 7% of non-T3SE families. Terminal reassortment may permit the near instantaneous evolution of new T3SEs and appears responsible for major modifications to effector activity and function. Because this process plays a more significant role in the evolution of T3SEs than non-effectors, it provides insight into the evolutionary origins of T3SEs and may also help explain the rapid emergence of new infectious agents.

  5. Polymeric optical sensors for selective and sensitive nitrite detection using cobalt(III) corrole and rhodium(III) porphyrin as ionophores.

    Science.gov (United States)

    Yang, Si; Wo, Yaqi; Meyerhoff, Mark E

    2014-09-16

    Cobalt(III) 5,10,15-tris(4-tert-butylphenyl) corrole with a triphenylphosphine axial ligand and rhodium(III) 5,10,15,20-tetra(p-tert-butylphenyl) porphyrin are incorporated into plasticized poly(vinyl chloride) films to fabricate nitrite-selective bulk optodes via absorbance measurements. The resulting films yield sensitive, fast and fully reversible response toward nitrite with significantly enhanced nitrite selectivity over other anions including lipophilic anions such as thiocyanate and perchlorate. The selectivity patterns differ greatly from the Hofmeister series based on anion lipophilicity and are consistent with selectivity obtained with potentiometric sensors based on the same ionophores. The optical nitrite sensors are shown to be useful for detecting rates of emission of nitric oxide (NO) from NO releasing polymers containing S-nitroso-N-acetyl-DL-penicillamine. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Polymeric Optical Sensors for Selective and Sensitive Nitrite Detection Using Cobalt(III) Corrole and Rh(III) Porphyrin as Ionophores

    Science.gov (United States)

    Yang, Si; Wo, Yaqi; Meyerhoff, Mark E.

    2014-01-01

    Cobalt(III) 5, 10, 15-tris(4-tert-butylphenyl) corrole with a triphenylphosphine axial ligand and rhodium(III) 5,10,15,20-tetra(p-tert-butylphenyl)porphyrin are incorporated into plasticized poly(vinyl chloride) films to fabricate nitrite-selective bulk optodes via absorbance measurements. The resulting films yield sensitive, fast and fully reversible response toward nitrite with significantly enhanced nitrite selectivity over other anions including lipophilic anions such as thiocyanate and perchlorate. The selectivity patterns differ greatly from the Hofmeister series based on anion lipophilicity and are consistent with selectivity obtained with potentiometric sensors based on the same ionophores. The optical nitrite sensors are shown to be useful for detecting rates of emission of nitric oxide (NO) from NO releasing polymers containing S-nitroso-N-acetyl-penicillamine. PMID:25150700

  7. NMR cryoporometry characterisation studies of the relation between drug release profile and pore structural evolution of polymeric nanoparticles.

    Science.gov (United States)

    Gopinathan, Navin; Yang, Bin; Lowe, John P; Edler, Karen J; Rigby, Sean P

    2014-07-20

    PLGA/PLA polymeric nanoparticles could potentially enhance the effectiveness of convective delivery of drugs, such as carboplatin, to the brain, by enabling a more sustained dosage over a longer time than otherwise possible. However, the link between the controlled release nanoparticle synthesis route, and the subsequent drug release profile obtained, is not well-understood, which hinders design of synthesis routes and availability of suitable nanoparticles. In particular, despite pore structure evolution often forming a key aspect of past theories of the physical mechanism by which a particular drug release profile is obtained, these theories have not been independently tested and validated against pore structural information. Such validation is required for intelligent synthesis design, and NMR cryoporometry can supply the requisite information. Unlike conventional pore characterisation techniques, NMR cryoporometry permits the investigation of porous particles in the wet state. NMR cryoporometry has thus enabled the detailed study of the evolving, nanoscale structure of nanoparticles during drug release, and thus related pore structure to drug release profile in a way not done previously for nanoparticles. Nanoparticles with different types of carboplatin drug release profiles were compared, including burst release, and various forms of delayed release. ESEM and TEM images of these nanoparticles also provided supporting data showing the rapid initial evolution of some nanoparticles. Different stages, within a complex, varying drug release profile, were found to be associated with particular types of changes in the nanostructure which could be distinguished by NMR. For a core-coat nanoparticle formulation, the development of smaller nanopores, following an extended induction period with no structural change, was associated with the onset of substantial drug release. This information could be used to independently validate the rationale for a particular synthesis

  8. Corrosion Performance of Composite Galvanic Coatings with Variable Concentration of Polymeric Nanoaggregates and/or Cr(III) Conversion Layers

    NARCIS (Netherlands)

    Koleva, D.A.; Taheri, P.; Tsvetkova, N.; Boshkov, N.; Van Breugel, K.; De Wit, J.H.W.; Mol, J.M.C.

    2011-01-01

    This paper reports on the corrosion performance of composite zinc layers (~ 8µm) on a steel substrate, considering the influence of nano-aggregates and Cr(III) conversion layers, compared to control (only Zn layers) conditions. The main factors, influencing the corrosion performance of Zn in this

  9. Electrochemical Polymerization of Iron(III) Polypyridyl Complexes through C-C Coupling of Redox Non-innocent Phenolato Ligands.

    Science.gov (United States)

    Unjaroen, Duenpen; Swart, Marcel; Browne, Wesley R

    2017-01-03

    Phenolato moieties impart redox flexibility to metal complexes due their accessible (oxidative) redox chemistry and have been proposed as functional ligand moieties in redox non-innocent ligand based transition metal catalysis. Here, the electro- and spectroelectrochemistry of phenolato based μ-oxo-diiron(III) complexes [(L 1 )Fe(μ-O)Fe(L 1 )] 2+ (1) and [(L 2 )Fe(μ-O)Fe(L 2 )] 2+ (2), where L 1 = 2-(((di(pyridin-2-yl)methyl)(pyridin-2-ylmethyl)amino)methyl)phenol and L 2 = 3,5-di-tert-butyl-2-(((di(pyridin-2-yl)methyl)(pyridin-2-ylmethyl)amino)methyl)phenol, is described. The electrochemical oxidation of 1 in dichloromethane results in aryl C-C coupling of phenoxyl radical ligand moieties to form tetra nuclear complexes, which undergo subsequent oxidation to form iron(III) phenolato based polymers (poly-1). The coupling is blocked by placing tert-butyl groups at para and ortho positions of phenol units (i.e., 2). Poly-1 shows two fully reversible redox processes in monomer free solution. Assignment of species observed during the electrochemical and chemical {(NH 4 ) 2 [Ce IV (NO 3 ) 6 ]} oxidation of 1 in acetonitrile is made by comparison with the UV-vis-NIR absorption and resonance micro-Raman spectroelectrochemistry of poly-1, and by DFT calculations, which confirms that oxidative coupling occurs in acetonitrile also. However, in contrast to that observed in dichloromethane, in acetonitrile, the oligomers formed are degraded in terms of a loss of the Fe(III)-O-Fe(III) bridge by protonation. The oxidative redox behavior of 1 and 2 is, therefore, dominated by the formation and reactivity of Fe(III) bound phenoxyl radicals, which considerably holds implications in regard to the design of phenolato based complexes for oxidation catalysis.

  10. Evolution and comparative analysis of the MHC Class III inflammatory region

    Directory of Open Access Journals (Sweden)

    Speed Terence P

    2006-11-01

    Full Text Available Abstract Background The Major Histocompatibility Complex (MHC is essential for immune function. Historically, it has been subdivided into three regions (Class I, II, and III, but a cluster of functionally related genes within the Class III region has also been referred to as the Class IV region or "inflammatory region". This group of genes is involved in the inflammatory response, and includes members of the tumour necrosis family. Here we report the sequencing, annotation and comparative analysis of a tammar wallaby BAC containing the inflammatory region. We also discuss the extent of sequence conservation across the entire region and identify elements conserved in evolution. Results Fourteen Class III genes from the tammar wallaby inflammatory region were characterised and compared to their orthologues in other vertebrates. The organisation and sequence of genes in the inflammatory region of both the wallaby and South American opossum are highly conserved compared to known genes from eutherian ("placental" mammals. Some minor differences separate the two marsupial species. Eight genes within the inflammatory region have remained tightly clustered for at least 360 million years, predating the divergence of the amphibian lineage. Analysis of sequence conservation identified 354 elements that are conserved. These range in size from 7 to 431 bases and cover 15.6% of the inflammatory region, representing approximately a 4-fold increase compared to the average for vertebrate genomes. About 5.5% of this conserved sequence is marsupial-specific, including three cases of marsupial-specific repeats. Highly Conserved Elements were also characterised. Conclusion Using comparative analysis, we show that a cluster of MHC genes involved in inflammation, including TNF, LTA (or its putative teleost homolog TNF-N, APOM, and BAT3 have remained together for over 450 million years, predating the divergence of mammals from fish. The observed enrichment in conserved

  11. Water oxidation catalysis upon evolution of molecular Co(III) cubanes in aqueous media.

    Science.gov (United States)

    Genoni, Andrea; La Ganga, Giuseppina; Volpe, Andrea; Puntoriero, Fausto; Di Valentin, Marilena; Bonchio, Marcella; Natali, Mirco; Sartorel, Andrea

    2015-01-01

    The increasing global energy demand has stimulated great recent efforts in investigating new solutions for artificial photosynthesis, a potential source of clean and renewable solar fuel. In particular, according to the generally accepted modular approach aimed at optimising separately the different compartments of the entire process, many studies have focused on the development of catalytic systems for water oxidation to oxygen. While in recent years there have been many reports on new catalytic systems, the mechanism and the active intermediates operating the catalysis have been less investigated. Well-defined, molecular catalysts, constituted by transition metals stabilised by a suitable ligand pool, could help in solving this aspect. However, in some cases molecular species have been shown to evolve to active metal oxides that constitute the other side of this catalysis dichotomy. In this paper, we address the evolution of tetracobalt(III) cubanes, stabilised by a pyridine/acetate ligand pool, to active species that perform water oxidation to oxygen. Primary evolution of the cubane in aqueous solution is likely initiated by removal of an acetate bridge, opening the coordination sphere of the cobalt centres. This cobalt derivative, where the pristine ligands still impact on the reactivity, shows enhanced electron transfer rates to Ru(bpy)3(3+) (hole scavenging) within a photocatalytic cycle with Ru(bpy)3(2+) as the photosensitiser and S2O8(2-) as the electron sink. A more accentuated evolution occurs under continuous irradiation, where Electron Paramagnetic Resonance (EPR) spectroscopy reveals the formation of Co(ii) intermediates, likely contributing to the catalytic process that evolves oxygen. All together, these results confirm the relevant effect of molecular species, in particular in fostering the rate of the electron transfer processes involved in light activated cycles, pivotal in the design of a photoactive device.

  12. LOCAL LUMINOUS INFRARED GALAXIES. III. CO-EVOLUTION OF BLACK HOLE GROWTH AND STAR FORMATION ACTIVITY?

    Energy Technology Data Exchange (ETDEWEB)

    Alonso-Herrero, Almudena; Hernan-Caballero, Antonio [Instituto de Fisica de Cantabria, CSIC-Universidad de Cantabria, E-39005 Santander (Spain); Pereira-Santaella, Miguel [Istituto di Astrofisica e Planetologia Spaziali, INAF-IAPS, I-00133 Rome (Italy); Rieke, George H. [Steward Observatory, University of Arizona, Tucson, AZ 85721 (United States); Diamond-Stanic, Aleksandar M. [Center for Astrophysics and Space Sciences, University of California, San Diego, La Jolla, CA 92093 (United States); Wang Yiping [National Astronomical Observatories, Chaoyang District, Beijing 100012 (China); Rigopoulou, Dimitra [Astrophysics Department, University of Oxford, Oxford OX1 3RH (United Kingdom)

    2013-03-10

    Local luminous infrared (IR) galaxies (LIRGs) have both high star formation rates (SFR) and a high AGN (Seyfert and AGN/starburst composite) incidence. Therefore, they are ideal candidates to explore the co-evolution of black hole (BH) growth and star formation (SF) activity, not necessarily associated with major mergers. Here, we use Spitzer/IRS spectroscopy of a complete volume-limited sample of local LIRGs (distances of <78 Mpc). We estimate typical BH masses of 3 Multiplication-Sign 10{sup 7} M{sub Sun} using [Ne III] 15.56 {mu}m and optical [O III] {lambda}5007 gas velocity dispersions and literature stellar velocity dispersions. We find that in a large fraction of local LIRGs, the current SFR is taking place not only in the inner nuclear {approx}1.5 kpc region, as estimated from the nuclear 11.3 {mu}m PAH luminosities, but also in the host galaxy. We next use the ratios between the SFRs and BH accretion rates (BHAR) to study whether the SF activity and BH growth are contemporaneous in local LIRGs. On average, local LIRGs have SFR to BHAR ratios higher than those of optically selected Seyferts of similar active galactic nucleus (AGN) luminosities. However, the majority of the IR-bright galaxies in the revised-Shapley-Ames Seyfert sample behave like local LIRGs. Moreover, the AGN incidence tends to be higher in local LIRGs with the lowest SFRs. All of this suggests that in local LIRGs there is a distinct IR-bright star-forming phase taking place prior to the bulk of the current BH growth (i.e., AGN phase). The latter is reflected first as a composite and then as a Seyfert, and later as a non-LIRG optically identified Seyfert nucleus with moderate SF in its host galaxy.

  13. Evolution of Fseg/Cseg dimorphism in region III of the Plasmodium falciparum eba-175 gene.

    Science.gov (United States)

    Yasukochi, Yoshiki; Naka, Izumi; Patarapotikul, Jintana; Hananantachai, Hathairad; Ohashi, Jun

    2017-04-01

    The 175-kDa erythrocyte binding antigen (EBA-175) of the malaria parasite Plasmodium falciparum is important for its invasion into human erythrocytes. The primary structure of eba-175 is divided into seven regions, namely I to VII. Region III contains highly divergent dimorphic segments, termed Fseg and Cseg. The allele frequencies of segmental dimorphism within a P. falciparum population have been extensively examined; however, the molecular evolution of segmental dimorphism is not well understood. A comprehensive comparison of nucleotide sequences among 32 P. falciparum eba-175 alleles identified in our previous study, two Plasmodium reichenowi, and one P. gaboni orthologous alleles obtained from the GenBank database was conducted to uncover the origin and evolutionary processes of segmental dimorphism in P. falciparum eba-175. In the eba-175 nucleotide sequence derived from a P. reichenowi CDC strain, both Fseg and Cseg were found in region III, which implies that the original eba-175 gene had both segments, and deletions of F- and C-segments generated Cseg and Fseg alleles, respectively. We also confirmed the presence of allele with Fseg and Cseg in another P. reichenowi strain (SY57), by re-mapping short reads obtained from the GenBank database. On the other hand, the segmental sequence of eba-175 ortholog in P. gaboni was quite diverged from those of the other species, suggesting that the original eba-175 dimorphism of P. falciparum can be traced back to the stem linage of P. falciparum and P. reichenowi. Our findings suggest that Fseg and Cseg alleles are derived from a single eba-175 allele containing both segments in the ancestral population of P. falciparum and P. reichenowi, and that the allelic dimorphism of eba-175 was shaped by the independent emergence of similar dimorphic lineage in different species that has never been observed in any evolutionary mode of allelic dimorphism at other loci in malaria genomes. Copyright © 2017 Elsevier B.V. All

  14. The Assembly and Evolution of Eastern Laurentia: Evidence from the QM-III Experiment

    Science.gov (United States)

    Darbyshire, F. A.; Levin, V. L.; Menke, W. H.; Bastow, I. D.; Petrescu, L.; Boyce, A.; Klaser, M.; Dunham, B.; Servali, A.; Neitz, T.

    2014-12-01

    Eastern North America is an excellent region to test hypotheses about the evolution through time of tectonic processes, the growth of continental crust and the assembly of continents. Over a spatial scale of just a few hundred kilometres, the surface geology records almost 3 billion years of Earth history, with a transition from the Archean Superior craton through the Proterozoic Grenville orogenic belt to the Phanerozoic Appalachian terranes and the edge of the North American continent. The boundaries between these major tectonic provinces have been mapped at the surface, and crustal-scale geophysical studies (e.g. LITHOPROBE) have been able to trace their complex signatures to the Moho and below in some parts of eastern Canada. Nevertheless, the nature of the boundaries across the region, and their continuation into the lithospheric mantle, remains enigmatic. The high wavespeed lithospheric keel of the Canadian Shield extends beneath the Proterozoic terranes; however it is still unclear whether this material represents a continuation of Archean lithosphere over which the Grenville terranes have been thrust, or whether the Grenville can be associated with its own thick keel. The transition from Proterozoic to Phanerozoic lithosphere beneath the Appalachian Front is likewise ambiguous. To shed new light on the tectonic evolution of the region, and the nature of the major tectonic boundaries, a broadband seismograph network was installed in eastern Canada in 2012-2013 through the QM-III (Quebec-Maine Across Three Sutures) experiment; stations will remain in place for 2-3 years. The network consists of a dense NW-SE profile from the southern tip of Hudson Bay to coastal Maine, supplemented by existing more sparsely-distributed stations, and a 2D deployment across Maritime Canada. Data acquisition is ongoing, but preliminary results from receiver function analysis, travel-time tomography and surface-wave dispersion are already showing some intriguing variations in

  15. Effect of Monomer Solubility on the Evolution of Copolymer Morphology during Polymerization-Induced Self-Assembly in Aqueous Solution.

    Science.gov (United States)

    Cockram, Amy A; Neal, Thomas J; Derry, Matthew J; Mykhaylyk, Oleksandr O; Williams, Neal S J; Murray, Martin W; Emmett, Simon N; Armes, Steven P

    2017-02-14

    Polymerization-induced self-assembly (PISA) has become a widely used technique for the rational design of diblock copolymer nano-objects in concentrated aqueous solution. Depending on the specific PISA formulation, reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization typically provides straightforward access to either spheres, worms, or vesicles. In contrast, RAFT aqueous emulsion polymerization formulations often lead to just kinetically-trapped spheres. This limitation is currently not understood, and only a few empirical exceptions have been reported in the literature. In the present work, the effect of monomer solubility on copolymer morphology is explored for an aqueous PISA formulation. Using 2-hydroxybutyl methacrylate (aqueous solubility = 20 g dm-3 at 70 °C) instead of benzyl methacrylate (0.40 g dm-3 at 70 °C) for the core-forming block allows access to an unusual "monkey nut" copolymer morphology over a relatively narrow range of target degrees of polymerization when using a poly(methacrylic acid) RAFT agent at pH 5. These new anisotropic nanoparticles have been characterized by transmission electron microscopy, dynamic light scattering, aqueous electrophoresis, shear-induced polarized light imaging (SIPLI), and small-angle X-ray scattering.

  16. Toward living radical polymerization.

    Science.gov (United States)

    Moad, Graeme; Rizzardo, Ezio; Thang, San H

    2008-09-01

    Radical polymerization is one of the most widely used processes for the commercial production of high-molecular-weight polymers. The main factors responsible for the preeminent position of radical polymerization are the ability to polymerize a wide array of monomers, tolerance of unprotected functionality in monomer and solvent, and compatibility with a variety of reaction conditions. Radical polymerization is simple to implement and inexpensive in relation to competitive technologies. However, conventional radical polymerization severely limits the degree of control that researchers can assert over molecular-weight distribution, copolymer composition, and macromolecular architecture. This Account focuses on nitroxide-mediated polymerization (NMP) and polymerization with reversible addition-fragmentation chain transfer (RAFT), two of the more successful approaches for controlling radical polymerization. These processes illustrate two distinct mechanisms for conferring living characteristics on radical polymerization: reversible deactivation (in NMP) and reversible or degenerate chain transfer (in RAFT). We devised NMP in the early 1980s and have exploited this method extensively for the synthesis of styrenic and acrylic polymers. The technique has undergone significant evolution since that time. New nitroxides have led to faster polymerization rates at lower temperatures. However, NMP is only applicable to a restricted range of monomers. RAFT was also developed at CSIRO and has proven both more robust and more versatile. It is applicable to the majority of monomers subject to radical polymerization, but the success of the polymerization depends upon the selection of the RAFT agent for the monomers and reaction conditions. We and other groups have proposed guidelines for selection, and the polymerization of most monomers can be well-controlled to provide minimal retardation and a high fraction of living chains by using one of just two RAFT agents. For example, a

  17. Coordination polymers of Fe(iii) and Al(iii) ions with TCA ligand: distinctive fluorescence, CO2 uptake, redox-activity and oxygen evolution reaction.

    Science.gov (United States)

    Dhara, Barun; Sappati, Subrahmanyam; Singh, Santosh K; Kurungot, Sreekumar; Ghosh, Prasenjit; Ballav, Nirmalya

    2016-04-28

    Fe and Al belong to different groups in the periodic table, one from the p-block and the other from the d-block. In spite of their different groups, they have the similarity of exhibiting a stable 3+ oxidation state. Here we have prepared Fe(iii) and Al(iii) based coordination polymers in the form of metal-organic gels with the 4,4',4''-tricarboxyltriphenylamine (TCA) ligand, namely Fe-TCA and Al-TCA, and evaluated some important physicochemical properties. Specifically, the electrical conductivity, redox-activity, porosity, and electrocatalytic activity (oxygen evolution reaction) of the Fe-TCA system were noted to be remarkably higher than those of the Al-TCA system. As for the photophysical properties, almost complete quenching of the fluorescence originating from TCA was observed in case of the Fe-TCA system, whereas for the Al-TCA system a significant retention of fluorescence with red-shifted emission was observed. Quantum mechanical calculations based on density functional theory (DFT) were performed to unravel the origin of such discriminative behaviour of these coordination polymer systems.

  18. Polymeric microspheres

    Science.gov (United States)

    Walt, David R.; Mandal, Tarun K.; Fleming, Michael S.

    2004-04-13

    The invention features core-shell microsphere compositions, hollow polymeric microspheres, and methods for making the microspheres. The microspheres are characterized as having a polymeric shell with consistent shell thickness.

  19. Studying the evolution of a type III radio from the Sun up to 1 AU

    Science.gov (United States)

    Mann, Gottfried; Breitling, Frank; Vocks, Christian; Fallows, Richard; Melnik, Valentin; Konovalenko, Alexander

    2017-04-01

    On March 16, 2016, a type III burst was observed with the ground-based radio telescopes LOFAR and URAN-2 as well as with the radiospectrometer aboard the spacecraft WIND.It started at 80 MHz at 06:37 UT and reached 50 kHz after 23 minutes. A type III burst are considered as the radio signature of an electron beam travelling from the corona into the interplanetary space. The energetic electrons carrying the beam excites Langmuir waves, which convert into radio waves by wave-particle interaction. The relationship between the drift rate and the frequency as derived from the dynamic radio spectra reveals that the velocity of the electrons generating the radio waves of the type III burst is increasing with increasing distance from the center of the Sun.

  20. Condensation Polymerization

    Indian Academy of Sciences (India)

    Condensation polymerizations, as thename suggests, utilizes bond-forming reactions that generatea small molecule condensate, which often needs to be continuouslyremoved to facilitate the formation of the polymer. Inthis article, I shall describe some of the essential principles ofcondensation polymerizations or more ...

  1. Charge state evolution in the solar wind. III. Model comparison with observations

    Energy Technology Data Exchange (ETDEWEB)

    Landi, E.; Oran, R.; Lepri, S. T.; Zurbuchen, T. H.; Fisk, L. A.; Van der Holst, B. [Department of Atmospheric, Oceanic and Space Sciences, University of Michigan, Ann Arbor, MI 48109 (United States)

    2014-08-01

    We test three theoretical models of the fast solar wind with a set of remote sensing observations and in-situ measurements taken during the minimum of solar cycle 23. First, the model electron density and temperature are compared to SOHO/SUMER spectroscopic measurements. Second, the model electron density, temperature, and wind speed are used to predict the charge state evolution of the wind plasma from the source regions to the freeze-in point. Frozen-in charge states are compared with Ulysses/SWICS measurements at 1 AU, while charge states close to the Sun are combined with the CHIANTI spectral code to calculate the intensities of selected spectral lines, to be compared with SOHO/SUMER observations in the north polar coronal hole. We find that none of the theoretical models are able to completely reproduce all observations; namely, all of them underestimate the charge state distribution of the solar wind everywhere, although the levels of disagreement vary from model to model. We discuss possible causes of the disagreement, namely, uncertainties in the calculation of the charge state evolution and of line intensities, in the atomic data, and in the assumptions on the wind plasma conditions. Last, we discuss the scenario where the wind is accelerated from a region located in the solar corona rather than in the chromosphere as assumed in the three theoretical models, and find that a wind originating from the corona is in much closer agreement with observations.

  2. Elektroaktive polymerer

    DEFF Research Database (Denmark)

    West, K.

    Traditionelt tænker vi på polymerer (plastik) som elektrisk isolerende materialer - det som er udenpå ledningerne. I dag kender vi imidlertid også polymerer med intrinsisk elektrisk ledningsevne, og plast er på vej ind i anvendelser, der tidligereudelukkende var baseret på metaller og uorganiske...... halvledere. Hertil kommer, at en del af de ledende polymerer kan stimuleres til at skifte mellem en ledende og en halvledende tilstand, hvorved de ændret både form og farve. I foredraget gives der enrække eksempler på anvendelse af polymerer som elektriske komponenter - rækkende fra polymer elektronik over...

  3. Robust numerical simulation of porosity evolution in chemical vapor infiltration III: three space dimension

    CERN Document Server

    Jin Shi

    2003-01-01

    Chemical vapor infiltration (CVI) process is an important technology to fabricate ceramic matrix composites (CMC's). In this paper, a three-dimension numerical model is presented to describe pore microstructure evolution during the CVI process. We extend the two-dimension model proposed in [S. Jin, X.L. Wang, T.L. Starr, J. Mater. Res. 14 (1999) 3829; S. Jin. X.L. Wang, T.L. Starr, X.F. Chen, J. Comp. Phys. 162 (2000) 467], where the fiber surface is modeled as an evolving interface, to the three space dimension. The 3D method keeps all the virtue of the 2D model: robust numerical capturing of topological changes of the interface such as the merging, and fast detection of the inaccessible pores. For models in the kinetic limit, where the moving speed of the interface is constant, some numerical examples are presented to show that this three-dimension model will effectively track the change of porosity, close-off time, location and shape of all pores.

  4. Phenomenological survey on the potential profile evolution in III-V binary compounds

    Directory of Open Access Journals (Sweden)

    Alejandro Mendoza Álvarez

    2011-01-01

    Full Text Available En este artículo se presenta el cambio en el perfil de eficacia potencial de algunos compuestos cuando el bandmixing de huecos ligeros y pesados se altera. Se obtuvieron mediante la aplicación de este teorema generalizado Shur a un problema de valores propios cuadrática obtenidos a partir de un sistema con N ecuaciones de segundo orden, junto en el contexto de la aproximación de masa efectiva multibanda. Se consideraron los valores de energía incidente que fue menor, igual y superior a la altura de la barrera de dispersión potencial de diferentes compuestos de semiconductores III-V binario. La mayoría de las propiedades estándar de los compuestos binarios en este estudio están garantizados, pero no todos los materiales que elegimos, han puesto de manifiesto la evolución que se espera en su perfil de potencial efectivo: algunos de los que constituyen los pozos cuánticos (QW en aplicaciones tecnológicas sólo convertirse en efectiva barrera (B las conductas de los agujeros de luz (LH cuando están en la energía incidente diferente (E se extiende y bandmixing diferentes presentes. Ninguno de los compuestos que constituyen barreras para las aplicaciones tecnológicas en este estudio se convierte en eficaz comportamientos QW válido tanto para la LH y HH. Sorprendentemente, todos los compuestos en este estudio que constituyen barreras estándar en las aplicaciones tecnológicas, las transiciones presente desde CS a B para la LH en el rango donde el valor de E es mayor que la altura de la barrera.

  5. Evolution and distribution of RNA polymerase II regulatory sites from RNA polymerase III dependant mobile Alu elements

    Directory of Open Access Journals (Sweden)

    Brahmachari Samir K

    2004-10-01

    Full Text Available Abstract Background The primate-specific Alu elements, which originated 65 million years ago, exist in over a million copies in the human genome. These elements have been involved in genome shuffling and various diseases not only through retrotransposition but also through large scale Alu-Alu mediated recombination. Only a few subfamilies of Alus are currently retropositionally active and show insertion/deletion polymorphisms with associated phenotypes. Retroposition occurs by means of RNA intermediates synthesised by a RNA polymerase III promoter residing in the A-Box and B-Box in these elements. Alus have also been shown to harbour a number of transcription factor binding sites, as well as hormone responsive elements. The distribution of Alus has been shown to be non-random in the human genome and these elements are increasingly being implicated in diverse functions such as transcription, translation, response to stress, nucleosome positioning and imprinting. Results We conducted a retrospective analysis of putative functional sites, such as the RNA pol III promoter elements, pol II regulatory elements like hormone responsive elements and ligand-activated receptor binding sites, in Alus of various evolutionary ages. We observe a progressive loss of the RNA pol III transcriptional potential with concomitant accumulation of RNA pol II regulatory sites. We also observe a significant over-representation of Alus harboring these sites in promoter regions of signaling and metabolism genes of chromosome 22, when compared to genes of information pathway components, structural and transport proteins. This difference is not so significant between functional categories in the intronic regions of the same genes. Conclusions Our study clearly suggests that Alu elements, through retrotransposition, could distribute functional and regulatable promoter elements, which in the course of subsequent selection might be stabilized in the genome. Exaptation of

  6. Faceting, composition and crystal phase evolution in III-V antimonide nanowire heterostructures revealed by combining microscopy techniques

    Science.gov (United States)

    Xu, Tao; Dick, Kimberly A.; Plissard, Sébastien; Hai Nguyen, Thanh; Makoudi, Younes; Berthe, Maxime; Nys, Jean-Philippe; Wallart, Xavier; Grandidier, Bruno; Caroff, Philippe

    2012-03-01

    III-V antimonide nanowires are among the most interesting semiconductors for transport physics, nanoelectronics and long-wavelength optoelectronic devices due to their optimal material properties. In order to investigate their complex crystal structure evolution, faceting and composition, we report a combined scanning electron microscopy (SEM), transmission electron microscopy (TEM), and scanning tunneling microscopy (STM) study of gold-nucleated ternary InAs/InAs1-xSbx nanowire heterostructures grown by molecular beam epitaxy. SEM showed the general morphology and faceting, TEM revealed the internal crystal structure and ternary compositions, while STM was successfully applied to characterize the oxide-free nanowire sidewalls, in terms of nanofaceting morphology, atomic structure and surface composition. The complementary use of these techniques allows for correlation of the morphological and structural properties of the nanowires with the amount of Sb incorporated during growth. The addition of even a minute amount of Sb to InAs changes the crystal structure from perfect wurtzite to perfect zinc blende, via intermediate stacking fault and pseudo-periodic twinning regimes. Moreover, the addition of Sb during the axial growth of InAs/InAs1-xSbx heterostructure nanowires causes a significant conformal lateral overgrowth on both segments, leading to the spontaneous formation of a core-shell structure, with an Sb-rich shell.

  7. Polymerization efficacy of simplified adhesive systems studied by NMR and MRI techniques.

    Science.gov (United States)

    Nunes, T G; Garcia, F C P; Osorio, R; Carvalho, R; Toledano, M

    2006-10-01

    To ascertain the efficacy of polymerization of self-etching dental adhesives in different solvent evaporation conditions. Four self-etching adhesive systems were studied. Two of them are classified as mild two-step self-etching adhesives (Clearfil SE Bond, Protect Bond) and the other two are strong one-step systems (Xeno III, ADP-Prompt-L-Pop). The influence of temperature and duration of the air-drying period on photo-polymerization was followed by: gravimetry, (1)H solid-state NMR spectroscopy and stray-field MRI. The evolution of proton magnetization with irradiation time was recorded and correlated with volumetric polymerization shrinkage and extent of reaction; evaporation and hardening effects were identified. Main variables determining water-solvent evaporation of the tested adhesives are: (1) water/HEMA relative concentration, (2) presence of photoinitiator compounds in the primer (SEB) and (3) presence of ethanol (XENO). SEB shows the highest extent of photo-polymerization of the tested adhesives. The lowest volumetric contraction was obtained for APLP and XENO and the attempt to remove the solvents did not increase the extent of polymerization significantly. Temperature increase following photo-polymerization reaction is dominant towards the effect of the drying step for solvent evaporation in self-etching systems. Attempts to remove the solvents did not increase the extent of polymerization, so other problems are impairing the polymerization of one-step adhesives. The use of tested one-step adhesives is discouraged as the attained low extent of polymerization may lead to low bond strength, high susceptibility to degradation and also will favor a continuing etching effect on the underlying dentin.

  8. Distinct co-evolution patterns of genes associated to DNA polymerase III DnaE and PolC

    Directory of Open Access Journals (Sweden)

    Engelen Stefan

    2012-02-01

    Full Text Available Abstract Background Bacterial genomes displaying a strong bias between the leading and the lagging strand of DNA replication encode two DNA polymerases III, DnaE and PolC, rather than a single one. Replication is a highly unsymmetrical process, and the presence of two polymerases is therefore not unexpected. Using comparative genomics, we explored whether other processes have evolved in parallel with each polymerase. Results Extending previous in silico heuristics for the analysis of gene co-evolution, we analyzed the function of genes clustering with dnaE and polC. Clusters were highly informative. DnaE co-evolves with the ribosome, the transcription machinery, the core of intermediary metabolism enzymes. It is also connected to the energy-saving enzyme necessary for RNA degradation, polynucleotide phosphorylase. Most of the proteins of this co-evolving set belong to the persistent set in bacterial proteomes, that is fairly ubiquitously distributed. In contrast, PolC co-evolves with RNA degradation enzymes that are present only in the A+T-rich Firmicutes clade, suggesting at least two origins for the degradosome. Conclusion DNA replication involves two machineries, DnaE and PolC. DnaE co-evolves with the core functions of bacterial life. In contrast PolC co-evolves with a set of RNA degradation enzymes that does not derive from the degradosome identified in gamma-Proteobacteria. This suggests that at least two independent RNA degradation pathways existed in the progenote community at the end of the RNA genome world.

  9. Evolution

    Science.gov (United States)

    Peter, Ulmschneider

    When we are looking for intelligent life outside the Earth, there is a fundamental question: Assuming that life has formed on an extraterrestrial planet, will it also develop toward intelligence? As this is hotly debated, we will now describe the development of life on Earth in more detail in order to show that there are good reasons why evolution should culminate in intelligent beings.

  10. On wind-type flows in astrophysical jets. III - Temporal evolution of perturbations and the formation of shocks

    Science.gov (United States)

    Trussoni, E.; Ferrari, A.; Rosner, R.; Tsinganos, K.

    1988-01-01

    The temporal evolution of disturbances in a spherically symmetric polytropic wind from a central object is studied. Such disturbances may be due to localized momentum addition/subtraction, as, for example, by MHD waves, heating/cooling mechanisms in the outflow, or localized deviations from spherical symmetric expansion. The evolution of an initial perturbed state to a continuous or discontinuous final equilibrium state, as predicted by previous analytic calculations for stationary flows, is followed. It is shown that some of the predicted discontinuous equilibrium states are not physically accessible, while the attainment of the remaining equilibrium states depends on both the temporal and the spatial parameters characterizing the perturbation. The results are derived for solar conditions, but in fact can be applied to outflows in other astrophysical systems. In particular, applications to the solar wind and flows in astrophysical jets are discussed.

  11. A unified N-body and statistical treatment of stellar dynamics. III - Early postcollapse evolution of globular clusters

    Science.gov (United States)

    Mcmillan, S. L. W.

    1986-01-01

    The period immediately following the core collapse phase in the evolution of a globular cluster is studied using a hybrid N-body/Fokker-Planck stellar dynamical code. Several core oscillations of the type predicted in earlier work are seen. The oscillations are driven by the formation, hardening, and ejection of binaries by three-body processes, and appear to decay on a timescale of about 10 to the 7th yr, for the choice of 'typical' cluster parameters made here. There is no evidence that they are gravothermal in nature. The mechanisms responsible for the decay are discussed in some detail. The distribution of hard binaries produced by the oscillations is compared with theoretical expectations and the longer term evolution of the system is considered.

  12. Evolution of the B-Block Binding Subunit of TFIIIC That Binds to the Internal Promoter for RNA Polymerase III

    Directory of Open Access Journals (Sweden)

    Sachiko Matsutani

    2014-01-01

    Full Text Available Eukaryotic RNA polymerase III transcribes tRNA genes, and this requires the transcription factor TFIIIC. Promoters are within genes, with which the B-block binding subunit of TFIIIC associates to initiate transcription. The binding subunits are more than 1000 amino acids in length in various eukaryotic species. There are four regions with conserved sequence similarities in the subunits. The helix-turn-helix motif is included in one of these regions and has been characterized as the B-block_TFIIIC family in the Pfam database. In the NCBI and EMBL translated protein databases, there are archaeal proteins (approximately 100 amino acids in length referred to as B-block binding subunits. Most of them contain a B-block_TFIIIC motif. DELTA-BLAST searches using these archaeal proteins as queries showed significant multiple blast hits for many eukaryotic B-block binding subunits on the same proteins. This result suggests that eukaryotic B-block binding subunits were constituted by repeating a small unit of B-block_TFIIIC over a long evolutionary period. Bacterial proteins have also been annotated as B-block binding subunits in the databases. Here, some of them were confirmed to have significant similarities to B-block_TFIIIC. These results may imply that part of the RNAP III transcription machinery existed in the common ancestry of prokaryotes and eukaryotes.

  13. Conducting Polymeric Materials

    DEFF Research Database (Denmark)

    Hvilsted, Søren

    2016-01-01

    The overall objective of this collection is to provide the most recent developments within the various areas of conducting polymeric materials. The conductivity of polymeric materials is caused by electrically charged particles, ions, protons and electrons. Materials in which electrons...

  14. "Click" i polymerer 2

    DEFF Research Database (Denmark)

    Hvilsted, Søren

    2012-01-01

    "Click"-reaktioner til fremstilling af ledende polymerer med funktionelle håndtag og bipolymermaterialer......"Click"-reaktioner til fremstilling af ledende polymerer med funktionelle håndtag og bipolymermaterialer...

  15. The MUSIC of Galaxy Clusters - III. Properties, evolution and Y-M scaling relation of protoclusters of galaxies

    Science.gov (United States)

    Sembolini, Federico; De Petris, Marco; Yepes, Gustavo; Foschi, Emma; Lamagna, Luca; Gottlöber, Stefan

    2014-06-01

    In this work, we study the properties of protoclusters of galaxies by employing the MultiDark SImulations of galaxy Clusters (MUSIC) set of hydrodynamical simulations, featuring a sample of 282 resimulated clusters with available merger trees up to z = 4. We study the characteristics and redshift evolution of the mass and the spatial distribution for all the protoclusters, which we define as the most massive progenitors of the clusters identified at z = 0. We extend the study of the baryon content to redshifts larger than 1 also in terms of gas and stars budgets: no remarkable variations with redshift are discovered. Furthermore, motivated by the proven potential of Sunyaev-Zel'dovich surveys to blindly search for faint distant objects, we compute the scaling relation between total object mass and integrated Compton y-parameter. We find that the slope of this scaling law is steeper than what expected for a self-similarity assumption among these objects, and it increases with redshift mainly when radiative processes are included. We use three different criteria to account for the dynamical state of the protoclusters, and find no significant dependence of the scaling parameters on the level of relaxation. We exclude the dynamical state as the cause of the observed deviations from self-similarity in protoclusters.

  16. THE TENTH DATA RELEASE OF THE SLOAN DIGITAL SKY SURVEY: FIRST SPECTROSCOPIC DATA FROM THE SDSS-III APACHE POINT OBSERVATORY GALACTIC EVOLUTION EXPERIMENT

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Christopher P.; Anderton, Timothy [Department of Physics and Astronomy, University of Utah, Salt Lake City, UT 84112 (United States); Alexandroff, Rachael [Center for Astrophysical Sciences, Department of Physics and Astronomy, Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218 (United States); Allende Prieto, Carlos [Instituto de Astrofísica de Canarias (IAC), C/Vía Láctea, s/n, E-38200, La Laguna, Tenerife (Spain); Anders, Friedrich [Leibniz-Institut für Astrophysik Potsdam (AIP), An der Sternwarte 16, D-14482 Potsdam (Germany); Anderson, Scott F.; Bhardwaj, Vaishali [Department of Astronomy, University of Washington, Box 351580, Seattle, WA 98195 (United States); Andrews, Brett H. [Department of Astronomy, Ohio State University, 140 West 18th Avenue, Columbus, OH 43210 (United States); Aubourg, Éric; Bautista, Julian E. [APC, University of Paris Diderot, CNRS/IN2P3, CEA/IRFU, Observatoire de Paris, Sorbonne Paris Cité, F-75205 Paris (France); Bailey, Stephen; Beutler, Florian [Lawrence Berkeley National Laboratory, One Cyclotron Road, Berkeley, CA 94720 (United States); Bastien, Fabienne A.; Berlind, Andreas A.; Bird, Jonathan C. [Department of Physics and Astronomy, Vanderbilt University, VU Station 1807, Nashville, TN 37235 (United States); Beers, Timothy C. [National Optical Astronomy Observatory, 950 North Cherry Avenue, Tucson, AZ 85719 (United States); Beifiori, Alessandra [Max-Planck-Institut für Extraterrestrische Physik, Giessenbachstraße, D-85748 Garching (Germany); Bender, Chad F. [Department of Astronomy and Astrophysics, 525 Davey Laboratory, The Pennsylvania State University, University Park, PA 16802 (United States); Bizyaev, Dmitry [Apache Point Observatory, P.O. Box 59, Sunspot, NM 88349 (United States); Blake, Cullen H. [Department of Physics and Astronomy, University of Pennsylvania, 219 S. 33rd St., Philadelphia, PA 19104 (United States); and others

    2014-04-01

    The Sloan Digital Sky Survey (SDSS) has been in operation since 2000 April. This paper presents the Tenth Public Data Release (DR10) from its current incarnation, SDSS-III. This data release includes the first spectroscopic data from the Apache Point Observatory Galaxy Evolution Experiment (APOGEE), along with spectroscopic data from the Baryon Oscillation Spectroscopic Survey (BOSS) taken through 2012 July. The APOGEE instrument is a near-infrared R ∼ 22,500 300 fiber spectrograph covering 1.514-1.696 μm. The APOGEE survey is studying the chemical abundances and radial velocities of roughly 100,000 red giant star candidates in the bulge, bar, disk, and halo of the Milky Way. DR10 includes 178,397 spectra of 57,454 stars, each typically observed three or more times, from APOGEE. Derived quantities from these spectra (radial velocities, effective temperatures, surface gravities, and metallicities) are also included. DR10 also roughly doubles the number of BOSS spectra over those included in the Ninth Data Release. DR10 includes a total of 1,507,954 BOSS spectra comprising 927,844 galaxy spectra, 182,009 quasar spectra, and 159,327 stellar spectra selected over 6373.2 deg{sup 2}.

  17. Polymerization Using Phosphazene Bases

    KAUST Repository

    Zhao, Junpeng

    2015-09-01

    In the recent rise of metal-free polymerization techniques, organic phosphazene superbases have shown their remarkable strength as promoter/catalyst for the anionic polymerization of various types of monomers. Generally, the complexation of phosphazene base with the counterion (proton or lithium cation) significantly improves the nucleophilicity of the initiator/chain end resulting in highly enhanced polymerization rates, as compared with conventional metalbased initiating systems. In this chapter, the general features of phosphazenepromoted/catalyzed polymerizations and the applications in macromolecular engineering (synthesis of functionalized polymers, block copolymers, and macromolecular architectures) are discussed with challenges and perspectives being pointed out.

  18. Nucleotide Selectivity in Abiotic RNA Polymerization Reactions

    Science.gov (United States)

    Coari, Kristin M.; Martin, Rebecca C.; Jain, Kopal; McGown, Linda B.

    2017-09-01

    In order to establish an RNA world on early Earth, the nucleotides must form polymers through chemical rather than biochemical reactions. The polymerization products must be long enough to perform catalytic functions, including self-replication, and to preserve genetic information. These functions depend not only on the length of the polymers, but also on their sequences. To date, studies of abiotic RNA polymerization generally have focused on routes to polymerization of a single nucleotide and lengths of the homopolymer products. Less work has been done the selectivity of the reaction toward incorporation of some nucleotides over others in nucleotide mixtures. Such information is an essential step toward understanding the chemical evolution of RNA. To address this question, in the present work RNA polymerization reactions were performed in the presence of montmorillonite clay catalyst. The nucleotides included the monophosphates of adenosine, cytosine, guanosine, uridine and inosine. Experiments included reactions of mixtures of an imidazole-activated nucleotide (ImpX) with one or more unactivated nucleotides (XMP), of two or more ImpX, and of XMP that were activated in situ in the polymerization reaction itself. The reaction products were analyzed using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) to identify the lengths and nucleotide compositions of the polymerization products. The results show that the extent of polymerization, the degree of heteropolymerization vs. homopolymerization, and the composition of the polymeric products all vary among the different nucleotides and depend upon which nucleotides and how many different nucleotides are present in the mixture.

  19. Synthesis and structure of a ferric complex of 2,6-di(1H-pyrazol-3-yl)pyridine and its excellent performance in the redox-controlled living ring-opening polymerization of ε-caprolactone.

    Science.gov (United States)

    Fang, Yang-Yang; Gong, Wei-Jie; Shang, Xiu-Juan; Li, Hong-Xi; Gao, Jun; Lang, Jian-Ping

    2014-06-14

    The reaction of FeCl3 with a pincer ligand, 2,6-di(1H-pyrazol-3-yl)pyridine (bppyH2), produced a mononuclear Fe(III) complex [Fe(bppyH2)Cl3] (1), which could be reduced to the corresponding Fe(II) dichloride complex [Fe(bppyH2)Cl2] (2) by suitable reducing agents such as Cp2Co or Fe powder. 1 and 2 exhibited a reversible transformation from each other with appropriate redox reagents. 1 could be utilized as a pre-catalyst to initiate the ring-opening polymerization of ε-caprolactone in the presence of alcohol but did not work. The 1/alcohol system displayed characteristics of a well-controlled polymerization with the resulting poly(ε-caprolactone) having low molecular weight distributions, a linear tendency of molecular weight evolution with conversion, and polymer growth observed for the sequential additions of ε-caprolactone monomer to the polymerization reaction. The polymerization was completely turned off by the in situ reduction of the catalytic Fe center via Cp2Co and then turned back upon the addition of [Cp2Fe]PF6. The rate of polymerization was modified by switching in situ between the Fe(III) and Fe(II) species.

  20. Step-Growth Polymerization.

    Science.gov (United States)

    Stille, J. K.

    1981-01-01

    Following a comparison of chain-growth and step-growth polymerization, focuses on the latter process by describing requirements for high molecular weight, step-growth polymerization kinetics, synthesis and molecular weight distribution of some linear step-growth polymers, and three-dimensional network step-growth polymers. (JN)

  1. Applied bioactive polymeric materials

    CERN Document Server

    Carraher, Charles; Foster, Van

    1988-01-01

    The biological and biomedical applications of polymeric materials have increased greatly in the past few years. This book will detail some, but not all, of these recent developments. There would not be enough space in this book to cover, even lightly, all of the major advances that have occurred. Some earlier books and summaries are available by two of this book's Editors (Gebelein & Carraher) and these should be consul ted for additional information. The books are: "Bioactive Polymeric Systems" (Plenum, 1985); "Polymeric Materials In Medication" (Plenum, 1985); "Biological Acti vi ties of Polymers" (American Chemical Society, 1982). Of these three, "Bioacti ve Polymeric Systems" should be the most useful to a person who is new to this field because it only contains review articles written at an introductory level. The present book primarily consists of recent research results and applications, with only a few review or summary articles. Bioactive polymeric materials have existed from the creation of life...

  2. Plasma polymerization by Softplasma

    DEFF Research Database (Denmark)

    Jiang, J.; Wu, Zhenning; Benter, Maike

    2008-01-01

    , external electrode, and electrodeless microwave or high frequency reactors. [3] Softplasma™ is an internal electrode plasma setup powered by low frequenc~ gower supply. It was developed in late 90s for surface treatment of silicone rubber. [ ]- 5] It is a low pressure, low electron density, 3D homogenous...... plasma. In this study, we are presenting the surface modification"pf polymers by plasma polymerization using Softplasma™. Softplasma™ can be used for two major types of polymerization: polymerization of vinyl monomers, where plasma acts as initiator; chemical vapour deposition, where plasma acts...

  3. Chelating polymeric membranes

    KAUST Repository

    Peinemann, Klaus-Viktor

    2015-01-22

    The present application offers a solution to the current problems associated with recovery and recycling of precious metals from scrap material, discard articles, and other items comprising one or more precious metals. The solution is premised on a microporous chelating polymeric membrane. Embodiments include, but are not limited to, microporous chelating polymeric membranes, device comprising the membranes, and methods of using and making the same.

  4. Polymeric materials from renewable resources

    Energy Technology Data Exchange (ETDEWEB)

    Frollini, Elisabete; Rodrigues, Bruno V. M.; Silva, Cristina G. da; Castro, Daniele O.; Ramires, Elaine C.; Oliveira, Fernando de; Santos, Rachel P. O. [Macromolecular Materials and Lignocellulosic Fibers Group, Center for Research on Science and Technology of BioResources, Institute of Chemistry of São Carlos, University of São Paulo, CP 780, 13560-970 São Carlos, São Paulo (Brazil)

    2016-05-18

    The goals of our studies have been the use of renewable raw materials in the preparation of polymeric materials with diversified properties. In this context, lignosulfonate, which is produced in large scale around the world, but not widely used in the production of polymeric materials, was used to replace phenol and polyols in the preparation of phenolic- (Ligno-PH) and polyurethane-type (Ligno-PU) polymers, respectively. These polymers were used to prepare composites reinforced with sisal lignocellulosic fibers. The use of lignosulfonate in the formulation of both types of polymers was beneficial, because in general composites with improved properties, specially impact strength, were obtained. Composites were also prepared from the so called “biopolyethylene” (HDPE), curaua lignocellulosic fiber, and castor oil (CO). All composites HDBPE/CO/Fiber exhibited higher impact strength, when compared to those of the corresponding HDBPE/Fiber. These results, combined with others (eg SEM images of the fractured surfaces) indicated that, in addition to acting as a plasticizer, this oil may have acted as a compatibilizer of the hydrophilic fiber with the hydrophobic polymer. The set of results indicated that (i) mats with nano (diameter ≤ 100nm) and/or ultrafine (submicron scale) fibers were produced, (ii) hybrid fibers were produced (bio-based mats composites), (iii) cellulosic pulp (CP) and/or lignin (Lig) can be combined with PET matrices to control properties such as stiffness and hydrophilicity of the respective mats. Materials with diversified properties were prepared from high content of renewable raw materials, thus fulfilling the proposed targets.

  5. Recent Developments in the Synthesis of Biomacromolecules and their Conjugates by Single Electron Transfer-Living Radical Polymerization.

    Science.gov (United States)

    Lligadas, Gerard; Grama, Silvia; Percec, Virgil

    2017-04-10

    Single electron transfer-living radical polymerization (SET-LRP) represents a robust and versatile tool for the synthesis of vinyl polymers with well-defined topology and chain end functionality. The crucial step in SET-LRP is the disproportionation of the Cu(I)X generated by activation with Cu(0) wire, powder, or nascent Cu(0) generated in situ into nascent, extremely reactive Cu(0) atoms and nanoparticles and Cu(II)X2. Nascent Cu(0) activates the initiator and dormant chains via a homogeneous or heterogeneous outer-sphere single-electron transfer mechanism (SET-LRP). SET-LRP provides an ultrafast polymerization of a plethora of monomers (e.g., (meth)-acrylates, (meth)-acrylamides, styrene, and vinyl chloride) including hydrophobic and water insoluble to hydrophilic and water soluble. Some advantageous features of SET-LRP are (i) the use of Cu(0) wire or powder as readily available catalysts under mild reaction conditions, (ii) their excellent control over molecular weight evolution and distribution as well as polymer chain ends, (iii) their high functional group tolerance allowing the polymerization of commercial-grade monomers, and (iv) the limited purification required for the resulting polymers. In this Perspective, we highlight the recent advancements of SET-LRP in the synthesis of biomacromolecules and of their conjugates.

  6. Inflation of a Polymeric Menbrane

    DEFF Research Database (Denmark)

    Kristensen, Susanne B.; Larsen, Johannes R.; Hassager, Ole

    1998-01-01

    We consider an axisymmetric polymeric membrane inflated by a uniform pressure difference acting across the membrane.......We consider an axisymmetric polymeric membrane inflated by a uniform pressure difference acting across the membrane....

  7. Polymeric coordination compounds

    Indian Academy of Sciences (India)

    Administrator

    Metal coordination polymers with one- and two-dimensional structures are of current interest due to their possible relevance to material science 1. In continuation of our previous studies 2,3, several new polymeric compounds are reported here. Among the complexes of silver with aminomethyl pyridine (amp) ...

  8. Polymerized and functionalized triglycerides

    Science.gov (United States)

    Plant oils are useful sustainable raw materials for the development of new chemical products. As part of our research emphasis in sustainability and green polymer chemistry, we have explored a new method for polymerizing epoxidized triglycerides with the use of fluorosulfonic acid. Depending on the ...

  9. RAFT polymerization mediated bioconjugation strategies

    OpenAIRE

    Bulmuş, Volga

    2011-01-01

    This review aims to highlight the use of RAFT polymerization in the synthesis of polymer bioconjugates. It covers two main bioconjugation strategies using the RAFT process: (i) post-polymerization bioconjugations using pre-synthesized reactive polymers, and (ii) bioconjugations via in situ polymerization using biomolecule-modified monomers or chain transfer agents. © 2011 The Royal Society of Chemistry.

  10. Molecular Design of Polymerized Ionic Liquids

    Science.gov (United States)

    Sanoja, Gabriel Eduardo

    Polymerized ionic liquids are an emerging class of functional materials with ionic liquid moieties covalently attached to a polymer backbone. As such, they synergistically combine the structural hierarchy of polymers with the versatile physicochemical properties of ionic liquids. Unlike other ion-containing polymers that are typically constrained to high glass transition temperatures, polymerized ionic liquids can exhibit low glass transition temperatures due to weak electrostatic interactions even at high charge fractions. Promising applications relevant to electrochemical energy conversion and CO2 capture and sequestration have been demonstrated for polymerized ionic liquids, but a molecular design strategy that allows for elucidation of their structure-property relationships is yet to be developed. A combination of anionic polymerization, click chemistry, and ion metathesis allows for fine and independent control over polymer properties including the number of repeat units, fraction of ionic liquid moieties, composition, and architecture. This strategy has been exploited to elucidate the effect of lamellar domain spacing on the ionic conductivity of block copolymers based on hydrated protic polymerized ionic liquids. The conductivity relationship demonstrated in this study suggests that a mechanically robust material can be designed without compromising its ability to transport ions. The vast set of ion pair combinations in polymerized liquids provides a unique opportunity to develop functional materials where properties can be controlled with subtle changes in molecular structure via ion metathesis. We illustrate the case of a polymerized ionic liquid that combines the low toxicity and macromolecular dimensions of poly(ethylene glycol) with the magnetic functionality of ion pairs containing iron(III). This material can yield novel theranostic agents with controlled residence time within the human body, and paramagnetic functionality to enhance 1H nuclei

  11. The unusual dynamics of parasite actin result from isodesmic polymerization.

    Science.gov (United States)

    Skillman, Kristen M; Ma, Christopher I; Fremont, Daved H; Diraviyam, Karthikeyan; Cooper, John A; Sept, David; Sibley, L David

    2013-01-01

    Previous reports have indicated that parasite actins are short and inherently unstable, despite being required for motility. Here we re-examine the polymerization properties of actin in Toxoplasma gondii, unexpectedly finding that it exhibits isodesmic polymerization in contrast to the conventional nucleation-elongation process of all previously studied actins from both eukaryotes and bacteria. Polymerization kinetics of actin in T. gondii lacks both a lag phase and critical concentration, normally characteristic of actins. Unique among actins, the kinetics of assembly can be fit with a single set of rate constants for all subunit interactions, without need for separate nucleation and elongation rates. This isodesmic model accurately predicts the assembly, disassembly and the size distribution of actin filaments in T. gondii in vitro, providing a mechanistic explanation for actin dynamics in vivo. Our findings expand the repertoire of mechanisms by which actin polymerization is governed and offer clues about the evolution of self-assembling, stabilized protein polymers.

  12. A VLT/FLAMES survey for massive binaries in Westerlund 1. III. The WC9d binary W239 and implications for massive stellar evolution

    NARCIS (Netherlands)

    Clark, J.S.; Ritchie, B. W.; Negueruela, I.; Crowther, P.A.; Damineli, A.; Jablonski, F.J.; Langer, N.|info:eu-repo/dai/nl/304829498

    2011-01-01

    Context. There is growing evidence that a treatment of binarity amongst OB stars is essential for a full theory of stellar evolution. However the binary properties of massive stars – frequency, mass ratio & orbital separation – are still poorly constrained. Aims. In order to address this shortcoming

  13. Self Organization via Frontal Polymerization

    Science.gov (United States)

    Pojman, John

    2007-03-01

    There are three modes of frontal polymerization: Isothermal, Photo and Thermal Isothermal frontal polymerization (IFP) is a directional polymerization that utilizes the Norish-Trommsdorff effect, to produce optical gradient materials. When a solution of methyl methacrylate and thermal initiator contacts a polymer seed (a small piece of poly(methyl methacrylate), a viscous region is formed in which the polymerization rate is faster than in the bulk solution. PhotoFP is driven by a continuous input of light. Thermal frontal polymerization is the propagation of a localized reaction zone through the coupling of thermal transport with the Arrhenius dependence of the kinetics of an exothermic polymerization. We will examine IFP and its use in making Gradient Optical Materials (GRIN) and our work on elucidating the mechanism. We will consider how thermal frontal polymerization can be used rapid rapid repair, making gradient materials and to study interesting nonlinear modes of thermal front propagation.

  14. Thermally bisignate supramolecular polymerization

    Science.gov (United States)

    Venkata Rao, Kotagiri; Miyajima, Daigo; Nihonyanagi, Atsuko; Aida, Takuzo

    2017-11-01

    One of the enticing characteristics of supramolecular polymers is their thermodynamic reversibility, which is attractive, in particular, for stimuli-responsive applications. These polymers usually disassemble upon heating, but here we report a supramolecular polymerization that occurs upon heating as well as cooling. This behaviour arises from the use of a metalloporphyrin-based tailored monomer bearing eight amide-containing side chains, which assembles into a highly thermostable one-dimensional polymer through π-stacking and multivalent hydrogen-bonding interactions, and a scavenger, 1-hexanol, in a dodecane-based solvent. At around 50 °C, the scavenger locks the monomer into a non-polymerizable form through competing hydrogen bonding. On cooling, the scavenger preferentially self-aggregates, unlocking the monomer for polymerization. Heating also results in unlocking the monomer for polymerization, by disrupting the dipole and hydrogen-bonding interactions with the scavenger. Analogous to 'upper and lower critical solution temperature phenomena' for covalently bonded polymers, such a thermally bisignate feature may lead to supramolecular polymers with tailored complex thermoresponsive properties.

  15. Developments in polymerization lamps.

    Science.gov (United States)

    Jiménez-Planas, Amparo; Martín, Juan; Abalos, Camilo; Llamas, Rafael

    2008-02-01

    Polymerization shrinkage of composite resins and the consequent stress generated at the composite-tooth interface continue to pose a serious clinical challenge. The development of high-intensity halogen lamps and the advent of curing units providing higher energy performance, such as laser lamps, plasma arc units, and, most recently, light-emitting diode (LED) curing units, have revolutionized polymerization lamp use and brought major changes in light-application techniques. A comprehensive review of the literature yielded the following conclusions: (1) the most reliable curing unit for any type of composite resin is the high-density halogen lamp, fitted with a programming device to enable both pulse-delay and soft-start techniques; (2) if any other type of curing unit is used, information must be available on the compatibility of the unit with the composite materials to be used; (3) polymerization lamp manufacturers need to focus on the ongoing development of LED technology; (4) further research is required to identify the most reliable light-application techniques.

  16. In vitro comparison of autoclave polymerization on the transverse strength of denture base resins.

    Science.gov (United States)

    Durkan, Rukiye; Ozel, Mehmet Birol; Bağiş, Bora; Usanmaz, Ali

    2008-07-01

    The aim of this study was to determine the effect of autoclave polymerization on the transverse strength of denture base polymers. To this end, 30 rectangular test specimens were fabricated of two heat-polymerized denture base polymers. The test groups were: (I) control, i.e., conventional water bath to polymerize resins by heat at 100 degrees C for 30 minutes; (II) autoclave polymerization at 60 degrees C for 30 minutes followed by 130 degrees C for 10 minutes; and (III) autoclave polymerization at 60 degrees C for 30 minutes followed by 130 degrees C for 20 minutes. The specimens were tested with three-point bending test at a crosshead speed of 5 mm/min. It was revealed that the transverse strength of specimens increased with statistical significance when the autoclave was used for polymerization.

  17. Phosphazene-promoted anionic polymerization

    KAUST Repository

    Zhao, Junpeng

    2014-01-01

    In the recent surge of metal-free polymerization techniques, phosphazene bases have shown their remarkable potential as organic promoters/catalysts for the anionic polymerization of various types of monomers. By complexation with the counterion (e.g. proton or lithium cation), phosphazene base significantly improve the nucleophilicity of the initiator/chain-end resulting in rapid and usually controlled anionic/quasi-anionic polymerization. In this review, we will introduce the general mechanism, i.e. in situ activation (of initiating sites) and polymerization, and summarize the applications of such a mechanism on macromolecular engineering toward functionalized polymers, block copolymers and complex macromolecular architectures.

  18. Packaging based on polymeric materials

    Directory of Open Access Journals (Sweden)

    Jovanović Slobodan M.

    2005-01-01

    Full Text Available In the past two years the consumption of common in the developed countries world wide (high tonnage polymers for packaging has approached a value of 50 wt.%. In the same period more than 50% of the packaging units on the world market were made of polymeric materials despite the fact that polymeric materials present 17 wt.% of all packaging materials. The basic properties of polymeric materials and their environmental and economical advantages, providing them such a position among packaging materials, are presented in this article. Recycling methods, as well as the development trends of polymeric packaging materials are also presented.

  19. Evolution of EF-hand calcium-modulated proteins. III. Exon sequences confirm most dendrograms based on protein sequences: calmodulin dendrograms show significant lack of parallelism

    Science.gov (United States)

    Nakayama, S.; Kretsinger, R. H.

    1993-01-01

    In the first report in this series we presented dendrograms based on 152 individual proteins of the EF-hand family. In the second we used sequences from 228 proteins, containing 835 domains, and showed that eight of the 29 subfamilies are congruent and that the EF-hand domains of the remaining 21 subfamilies have diverse evolutionary histories. In this study we have computed dendrograms within and among the EF-hand subfamilies using the encoding DNA sequences. In most instances the dendrograms based on protein and on DNA sequences are very similar. Significant differences between protein and DNA trees for calmodulin remain unexplained. In our fourth report we evaluate the sequences and the distribution of introns within the EF-hand family and conclude that exon shuffling did not play a significant role in its evolution.

  20. Evolution of long-lived globular cluster stars. III. Effect of the initial helium spread on the position of stars in a synthetic Hertzsprung-Russell diagram

    Science.gov (United States)

    Chantereau, W.; Charbonnel, C.; Meynet, G.

    2016-08-01

    Context. Globular clusters host multiple populations of long-lived low-mass stars whose origin remains an open question. Several scenarios have been proposed to explain the associated photometric and spectroscopic peculiarities. They differ, for instance, in the maximum helium enrichment they predict for stars of the second population, which these stars can inherit at birth as the result of the internal pollution of the cluster by different types of stars of the first population. Aims: We present the distribution of helium-rich stars in present-day globular clusters as it is expected in the original framework of the fast-rotating massive stars scenario (FRMS) as first-population polluters. We focus on NGC 6752. Methods: We completed a grid of 330 stellar evolution models for globular cluster low-mass stars computed with different initial chemical compositions corresponding to the predictions of the original FRMS scenario for [Fe/H] = -1.75. Starting from the initial helium-sodium relation that allows reproducing the currently observed distribution of sodium in NGC 6752, we deduce the helium distribution expected in that cluster at ages equal to 9 and 13 Gyr. We distinguish the stars that are moderately enriched in helium from those that are very helium-rich (initial helium mass fraction below and above 0.4, respectively), and compare the predictions of the FRMS framework with other scenarios for globular cluster enrichment. Results: The effect of helium enrichment on the stellar lifetime and evolution reduces the total number of very helium-rich stars that remain in the cluster at 9 and 13 Gyr to only 12% and 10%, respectively, from an initial fraction of 21%. Within this age range, most of the stars still burn their hydrogen in their core, which widens the MS band significantly in effective temperature. The fraction of very helium-rich stars drops in the more advanced evolution phases, where the associated spread in effective temperature strongly decreases. These

  1. Collaborative Research: Polymeric Multiferroics

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Shenqiang [Temple Univ., Philadelphia, PA (United States). College of Engineering

    2017-04-20

    The goal of this project is to investigate room temperature magnetism and magnetoelectric coupling of polymeric multiferroics. A new family of molecular charge-transfer crystals has been emerged as a fascinating opportunity for the development of all-organic electrics and spintronics due to its weak hyperfine interaction and low spin-orbit coupling; nevertheless, direct observations of room temperature magnetic spin ordering have yet to be accomplished in organic charge-transfer solids. Furthermore, room temperature magnetoelectric coupling effect hitherto known multiferroics, is anticipated in organic donor-acceptor complexes because of magnetic field effects on charge-transfer dipoles, yet this is also unexplored. The PI seeks to fundamental understanding of the control of organic crystals to demonstrate and explore room temperature multiferroicity. The experimental results have been verified through the theoretical modeling.

  2. Richard III

    DEFF Research Database (Denmark)

    Lauridsen, Palle Schantz

    2017-01-01

    Kort analyse af Shakespeares Richard III med fokus på, hvordan denne skurk fremstilles, så tilskuere (og læsere) langt henad vejen kan føle sympati med ham. Med paralleller til Netflix-serien "House of Cards"......Kort analyse af Shakespeares Richard III med fokus på, hvordan denne skurk fremstilles, så tilskuere (og læsere) langt henad vejen kan føle sympati med ham. Med paralleller til Netflix-serien "House of Cards"...

  3. Silicon and aluminum doping effects on the microstructure and properties of polymeric amorphous carbon films

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Xiaoqiang, E-mail: lxq_suse@sina.com [Material Corrosion and Protection Key Laboratory of Sichuan province, Sichuan University of Science and Engineering, Zigong 643000 (China); Hao, Junying, E-mail: jyhao@licp.cas.cn [State Key Laboratory of Solid Lubrication, Lanzhou Institute of Chemical Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Xie, Yuntao [Material Corrosion and Protection Key Laboratory of Sichuan province, Sichuan University of Science and Engineering, Zigong 643000 (China)

    2016-08-30

    Highlights: • Evolution of nanostructure and properties of the polymeric amorphous carbon films were firstly studied. • Si doping enhanced polymerization of the hydrocarbon chains and Al doping resulted in increase in the ordered carbon clusters of polymeric amorphous carbon films. • Soft polymeric amorphous carbon films exhibited an unconventional frictional behaviors with a superior wear resistance. • The mechanical and vacuum tribological properties of the polymeric amorphous carbon films were significantly improved by Si and Al co-doping. - Abstract: Polymeric amorphous carbon films were prepared by radio frequency (R.F. 13.56 MHz) magnetron sputtering deposition. The microstructure evolution of the deposited polymeric films induced by silicon (Si) and aluminum(Al) doping were scrutinized through infrared spectroscopy, multi-wavelength Raman spectroscopy, scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM). The comparative results show that Si doping can enhance polymerization and Al doping results in an increase in the ordered carbon clusters. Si and Al co-doping into polymeric films leads to the formation of an unusual dual nanostructure consisting of cross-linked polymer-like hydrocarbon chains and fullerene-like carbon clusters. The super-high elasticity and super-low friction coefficients (<0.002) under a high vacuum were obtained through Si and Al co-doping into the films. Unconventionally, the co-doped polymeric films exhibited a superior wear resistance even though they were very soft. The relationship between the microstructure and properties of the polymeric amorphous carbon films with different elements doping are also discussed in detail.

  4. Evolution, Nucleosynthesis, and Yields of AGB Stars at Different Metallicities. III. Intermediate-mass Models, Revised Low-mass Models, and the ph-FRUITY Interface

    Science.gov (United States)

    Cristallo, S.; Straniero, O.; Piersanti, L.; Gobrecht, D.

    2015-08-01

    We present a new set of models for intermediate-mass asymptotic giant branch (AGB) stars (4.0, 5.0, and 6.0 M⊙) at different metallicities (-2.15 ≤ [Fe/H] ≤ +0.15). This set integrates the existing models for low-mass AGB stars (1.3 ≤ M/M⊙ ≤ 3.0) already included in the FRUITY database. We describe the physical and chemical evolution of the computed models from the main sequence up to the end of the AGB phase. Due to less efficient third dredge up episodes, models with large core masses show modest surface enhancements. This effect is due to the fact that the interpulse phases are short and, therefore, thermal pulses (TPs) are weak. Moreover, the high temperature at the base of the convective envelope prevents it from deeply penetrating the underlying radiative layers. Depending on the initial stellar mass, the heavy element nucleosynthesis is dominated by different neutron sources. In particular, the s-process distributions of the more massive models are dominated by the 22Ne(α,n)25Mg reaction, which is efficiently activated during TPs. At low metallicities, our models undergo hot bottom burning and hot third dredge up. We compare our theoretical final core masses to available white dwarf observations. Moreover, we quantify the influence intermediate-mass models have on the carbon star luminosity function. Finally, we present the upgrade of the FRUITY web interface, which now also includes the physical quantities of the TP-AGB phase for all of the models included in the database (ph-FRUITY).

  5. High temperature structural, polymeric foams from high internal emulsion polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Hoisington, M.A.; Duke, J.R.; Apen, P.G.

    1996-02-01

    In 1982, a high internal phase emulsion (HIPE) polymerization process to manufacture microcellular, polymeric foam systems was patented by Unilever. This patent discloses a polymerization process that occurs in a water-in-oil emulsion in which the water represents at least 76% of the emulsion by volume. The oil phase consists of vinyl monomers such as styrene and acrylates that are crosslinked by divinyl monomers during polymerization. After polymerization and drying to remove the water phase, the result is a crosslinked polymer foam with an open cell microstructure that is homogeneous throughout in terms of morphology, density, and mechanical properties. Since 1982, numerous patents have examined various HIPE polymerized foam processing techniques and applications that include absorbents for body fluids, cleaning materials, and ion exchange systems. All the published HIPE polymerized foams have concentrated on materials for low temperature applications. Copolymerization of styrene with maleic anhydride and N-substituted maleimides to produce heat resistant thermoplastics has been studied extensively. These investigations have shown that styrene will free radically copolymerize with N-substituted maleimides to create an alternating thermoplastic copolymer with a Tg of approximately 200{degrees}C. However, there are many difficulties in attempting the maleimide styrene copolymerization in a HIPE such as lower polymerization temperatures, maleimide solubility difficulties in both styrene and water, and difficulty obtaining a stable HIPE with a styrene/maleimide oil phase. This work describes the preparation of copolymer foams from N-ethylmaleimide and Bis(3-ethyl-5-methyl-4-maleimide-phenyl)methane with styrene based monomers and crosslinking agents.

  6. Organometallic Polymeric Conductors

    Science.gov (United States)

    Youngs, Wiley J.

    1997-01-01

    For aerospace applications, the use of polymers can result in tremendous weight savings over metals. Suitable polymeric materials for some applications like EMI shielding, spacecraft grounding, and charge dissipation must combine high electrical conductivity with long-term environmental stability, good processability, and good mechanical properties. Recently, other investigators have reported hybrid films made from an electrically conductive polymer combined with insulating polymers. In all of these instances, the films were prepared by infiltrating an insulating polymer with a precursor for a conductive polymer (either polypyrrole or polythiophene), and oxidatively polymerizing the precursor in situ. The resulting composite films have good electrical conductivity, while overcoming the brittleness inherent in most conductive polymers. Many aerospace applications require a combination of properties. Thus, hybrid films made from polyimides or other engineering resins are of primary interest, but only if conductivities on the same order as those obtained with a polystyrene base could be obtained. Hence, a series of experiments was performed to optimize the conductivity of polyimide-based composite films. The polyimide base chosen for this study was Kapton. 3-MethylThiophene (3MT) was used for the conductive phase. Three processing variables were identified for producing these composite films, namely time, temperature, and oxidant concentration for the in situ oxidation. Statistically designed experiments were used to examine the effects of these variables and synergistic/interactive effects among variables on the electrical conductivity and mechanical strength of the films. Multiple linear regression analysis of the tensile data revealed that temperature and time have the greatest effect on maximum stress. The response surface of maximum stress vs. temperature and time (for oxidant concentration at 1.2 M) is shown. Conductivity of the composite films was measured for

  7. Polymerization of anionic wormlike micelles.

    Science.gov (United States)

    Zhu, Zhiyuan; González, Yamaira I; Xu, Hangxun; Kaler, Eric W; Liu, Shiyong

    2006-01-31

    Polymerizable anionic wormlike micelles are obtained upon mixing the hydrotropic salt p-toluidine hydrochloride (PTHC) with the reactive anionic surfactant sodium 4-(8-methacryloyloxyoctyl)oxybenzene sulfonate (MOBS). Polymerization captures the cross-sectional radius of the micelles (approximately 2 nm), induces micellar growth, and leads to the formation of a stable single-phase dispersion of wormlike micellar polymers. The unpolymerized and polymerized micelles were characterized using static and dynamic laser light scattering, small-angle neutron scattering, 1H NMR, and stopped-flow light scattering. Stopped-flow light scattering was also used to measure the average lifetime of the unpolymerized wormlike micelles. A comparison of the average lifetime of unpolymerized wormlike micelles with the surfactant monomer propagation rate was used to elucidate the mechanism of polymerization. There is a significant correlation between the ratio of the average lifetime to the monomer propagation rate and the average aggregation number of the polymerized wormlike micelles.

  8. Kinetics of silica polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Weres, O.; Yee, A.; Tsao, L.

    1980-05-01

    The polymerization of silicic acid in geothermal brine-like aqueous solutions to produce amorphous silica in colloidal form has been studied experimentally and theoretically. A large amount of high quality experimental data has been generated over the temperature rang 23 to 100{sup 0}C. Wide ranges of dissolved silica concentration, pH, and sodium chloride concentration were covered. The catalytic effects of fluoride and the reaction inhibiting effects of aluminum and boron were studied also. Two basic processes have been separately studied: the formation of new colloidal particles by the homogeneous nucleation process and the deposition of dissolved silica on pre-existing colloidal particles. A rigorous theory of the formation of colloidal particles of amorphous silica by homogeneous nucleation was developed. This theory employs the Lothe-Pound formalism, and is embodied in the computer code SILNUC which quantitatively models the homogeneous nucleation and growth of colloidal silica particles in more than enough detail for practical application. The theory and code were extensively used in planning the experimental work and analyzing the data produced. The code is now complete and running in its final form. It is capable of reproducing most of the experimental results to within experimental error. It is also capable of extrapolation to experimentally inaccessible conditions, i.e., high temperatures, rapidly varying temperature and pH, etc.

  9. Electroactivity in Polymeric Materials

    CERN Document Server

    2012-01-01

    Electroactivity in Polymeric Materials provides an in-depth view of the theory of electroactivity and explores exactly how and why various electroactive phenomena occur. The book explains the theory behind electroactive bending (including ion-polymer-metal-composites –IPMCs), dielectric elastomers, electroactive contraction, and electroactive contraction-expansion cycles.  The book also balances theory with applications – how electroactivity can be used – drawing inspiration from the manmade mechanical world and the natural world around us.  This book captures: A complete introduction to electroactive materials including examples and recent developments The theory and applications of numerous topics like electroactive bending of dielectric elastomers and electroactive contraction and expansion New topics, such as biomimetic applications and energy harvesting This is a must-read within the electroactive community, particularly for professionals and graduate students who are interested in the ...

  10. Polyolefin nanocomposites in situ polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Galland, Griselda Barrera; Fim, Fabiana de C.; Milani, Marceo A.; Silva, Silene P. da; Forest, Tadeu; Radaelli, Gislaine, E-mail: griselda.barrera@ufrgs.br [Universidade Federal do Rio Grande de Sul - UFRGS, Porto Alegre, RS (Brazil); Basso, Nara R.S. [Pontificia Universidade Catolica do Rio Grande do Sul, Porto Alegre, RS (Brazil); Quijada, Raul [Universidad de Chile, Santiago (Chile)

    2011-07-01

    Polyethylene and polypropylene nanocomposites using grapheme nanosheets and treated chrysotile have been synthesized by in situ polymerization using metallocene catalysts. The fillers have been submitted to acid, thermal and/ou ultrasound treatments before to introduce them into the polymerization reactor. A complete characterization of the fillers has been done. The nanocomposites have been characterized by SEM, TEM, DRX and AFM. The thermal, mechanic -dynamic, mechanical and electrical properties of the nanocomposites are discussed. (author)

  11. Photo-induced copper-mediated polymerization of methyl acrylate in continuous flow reactors

    OpenAIRE

    Wenn, Benjamin; CONRADI, Matthias; Carreiras, Andre Demetrio; Haddleton, David M.; Junkers, Thomas

    2014-01-01

    Photo-induced copper-mediated radical polymerization of methyl acrylate (MA) is carried out in DMSO at 15 °C in a tubular photo-flow reactor as well as in a glass-chip based microreactor. Polymerization reactions proceed rapidly to approximately 90% monomer conversion within 20 minutes of reactor residence time. Control of reactions is high as evidenced by ideal polymerization kinetics, low dispersities of the obtained polymers (in the range of 1.1) and linear evolution of number average mole...

  12. Visualization and characterization of interfacial polymerization layer formation.

    Science.gov (United States)

    Zhang, Yali; Benes, Nieck E; Lammertink, Rob G H

    2015-01-21

    We present a microfluidic platform to visualize the formation of free-standing films by interfacial polymerization. A microfluidic device is fabricated, with an array of micropillars to stabilize an aqueous-organic interface that allows a direct observation of the films formation process via optical microscopy. Three different amines are selected to react with trimesoyl chloride: piperazine, JEFFAMINE(®)D-230, and an ammonium functionalized polyhedral oligomeric silsesquioxane. Tracking the formation of the free-standing films in time reveals strong effects of the characteristics of the amine precursor on the morphological evolution of the films. Piperazine exhibits a rapid reaction with trimesoyl chloride, forming a film up to 20 μm thick within half a minute. JEFFAMINE(®)D-230 displays much slower film formation kinetics. The location of the polymerization reaction was initially in the aqueous phase and then shifted into the organic phase. Our in situ real-time observations provide information on the kinetics and the changing location of the polymerization. This provides insights with important implications for fine-tuning of interfacial polymerizations for various applications.

  13. Removal of americium from aqueous nitrate solutions by sorption onto PC88A-impregnated macroporous polymeric beads.

    Science.gov (United States)

    Pathak, S K; Tripathi, S C; Singh, K K; Mahtele, A K; Kumar, Manmohan; Gandhi, P M

    2014-08-15

    The removal of Am (III) ions from aqueous solutions was studied by solid-liquid extraction using indigenously synthesized Extractant Impregnated Macroporous Polymeric Beads (EIMPBs). These beads were prepared by an in situ phase inversion method using polyethersulfone (PES) as base polymer and 2-ethylhexyl phosphonic acid mono-2-ethylhexyl ester (PC88A) as an extractant. The synthesized EIMPBs were characterized by FTIR, TGA and SEM techniques. The batch equilibration study using these beads for the uptake of Am (III) was carried out as a function of parameters, like pH, equilibration time, Am (III) concentration, etc. The blank polymeric beads, without PC88A, have shown negligible sorption of Am (III) under the experimental conditions. The experimental data on the sorption behavior of Am (III) on the polymeric beads fitted well in the pseudo-second-order kinetics model. The synthesized polymeric beads exhibited very good sorption capacity for Am (III) at pH 3. The reusability of the beads was also ascertained by repetitive sorption/desorption of Am (III) up to 10 cycles of operation, without any significant change in their sorption characteristics. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. Columnar modelling of nucleation burst evolution in the convective boundary layer – first results from a feasibility study Part III: Preliminary results on physicochemical model performance using two "clean air mass" reference scenarios

    Directory of Open Access Journals (Sweden)

    O. Hellmuth

    2006-01-01

    Full Text Available In Paper I of four papers, a revised columnar high-order model to investigate gas-aerosol-turbulence interactions in the convective boundary layer (CBL was proposed. In Paper II, the model capability to predict first-, second- and third-order moments of meteorological variables in the CBL was demonstrated using available observational data. In the present Paper III, the high-order modelling concept is extended to sulphur and ammonia chemistry as well as to aerosol dynamics. Based on the previous CBL simulation, a feasibility study is performed using two "clean air mass" scenarios with an emission source at the ground but low aerosol background concentration. Such scenarios synoptically correspond to the advection of fresh post-frontal air in an anthropogenically influenced region. The aim is to evaluate the time-height evolution of ultrafine condensation nuclei (UCNs and to elucidate the interactions between meteorological and physicochemical variables in a CBL column. The scenarios differ in the treatment of new particle formation (NPF, whereas homogeneous nucleation according to the classical nucleation theory (CNT is considered. The first scenario considers nucleation of a binary system consisting of water vapour and sulphuric acid (H2SO4 vapour, the second one nucleation of a ternary system additionally involving ammonia (NH3. Here, the two synthetic scenarios are discussed in detail, whereas special attention is payed to the role of turbulence in the formation of the typical UCN burst behaviour, that can often be observed in the surface layer. The intercomparison of the two scenarios reveals large differences in the evolution of the UCN number concentration in the surface layer as well as in the time-height cross-sections of first-order moments and double correlation terms. Although in both cases the occurrence of NPF bursts could be simulated, the burst characteristics and genesis of the bursts are completely different. It is demonstrated

  15. Columnar modelling of nucleation burst evolution in the convective boundary layer - first results from a feasibility study Part III: Preliminary results on physicochemical model performance using two "clean air mass" reference scenarios

    Science.gov (United States)

    Hellmuth, O.

    2006-09-01

    In Paper I of four papers, a revised columnar high-order model to investigate gas-aerosol-turbulence interactions in the convective boundary layer (CBL) was proposed. In Paper II, the model capability to predict first-, second- and third-order moments of meteorological variables in the CBL was demonstrated using available observational data. In the present Paper III, the high-order modelling concept is extended to sulphur and ammonia chemistry as well as to aerosol dynamics. Based on the previous CBL simulation, a feasibility study is performed using two "clean air mass" scenarios with an emission source at the ground but low aerosol background concentration. Such scenarios synoptically correspond to the advection of fresh post-frontal air in an anthropogenically influenced region. The aim is to evaluate the time-height evolution of ultrafine condensation nuclei (UCNs) and to elucidate the interactions between meteorological and physicochemical variables in a CBL column. The scenarios differ in the treatment of new particle formation (NPF), whereas homogeneous nucleation according to the classical nucleation theory (CNT) is considered. The first scenario considers nucleation of a binary system consisting of water vapour and sulphuric acid (H2SO4) vapour, the second one nucleation of a ternary system additionally involving ammonia (NH3). Here, the two synthetic scenarios are discussed in detail, whereas special attention is payed to the role of turbulence in the formation of the typical UCN burst behaviour, that can often be observed in the surface layer. The intercomparison of the two scenarios reveals large differences in the evolution of the UCN number concentration in the surface layer as well as in the time-height cross-sections of first-order moments and double correlation terms. Although in both cases the occurrence of NPF bursts could be simulated, the burst characteristics and genesis of the bursts are completely different. It is demonstrated, that

  16. Functionalization and Polymerization on the CNT Surfaces

    KAUST Repository

    Albuerne, Julio

    2013-07-01

    In this review we focus on the current status of using carbon nanotube (CNT) as a filler for polymer nanocomposites. Starting with the historical background of CNT, its distinct properties and the surface functionalization of the nanotube, the three different surface polymerization techniques, namely grafting "from", "to" and "through/in between" were discussed. Wider focus has been given on "grafting from" surface initiated polymerizations, including atom transfer radical polymerization (ATRP), reversible addition fragmentation chain-transfer (RAFT) Polymerization, nitroxide mediated polymerization (NMP), ring opening polymerization (ROP) and other miscellaneous polymerization methods. The grafting "to" and "through / in between" also discussed and compared with grafting from polymerization. The merits and shortcomings of all three grafting methods were discussed and the bottleneck issue in grafting from method has been highlighted. Furthermore the current and potential future industrial applications were deliberated. Finally the toxicity issue of CNTs in the final product has been reviewed with the limited available literature knowledge. © 2013 Bentham Science Publishers.

  17. Biomimetic polymeric membranes for water treatment

    DEFF Research Database (Denmark)

    Habel, Joachim Erich Otto

    This project is about the interplay of the three major components of aquaporin based biomimetic polymeric membranes (ABPMs): Aquaporins (AQPs), amphiphilic block copolymers, serving as a vesicular matrix for the hydrophobic AQP exterior (proteopolymersomes) and a polymeric membrane as embedment...

  18. Biodegradable polymeric prodrugs of naltrexone

    NARCIS (Netherlands)

    Bennet, D.B.; Li, X.; Adams, N.W.; Kim, S.W.; Hoes, C.J.T.; Hoes, C.J.T.; Feijen, Jan

    1991-01-01

    The development of a biodegradable polymeric drug delivery system for the narcotic antagonist naltrexone may improve patient compliance in the treatment of opiate addiction. Random copolymers consisting of the ¿-amino acids N5-(3-hydroxypropyl--glutamine and -leucine were synthesized with equimolar

  19. Polymeric materials for corrosion control

    Energy Technology Data Exchange (ETDEWEB)

    Dickie, R.A.; Floyd, F.L. (eds.)

    1986-01-01

    This volume of 31 typescript chapters is concerned with polymeric coatings. The papers originated in a symposium held in Chicago in 1985 and are divided into three categories: Evaluation of Material Performance; Adhesion and Interfacial Aspects of Corrosion Protection; and Materials for Corrosion Protection. An extensive subject index is included.

  20. Novel ionic polymeric hydraulic actuators

    Science.gov (United States)

    Shahinpoor, Mohsen; Kim, Kwang J.

    2001-07-01

    It is now well recognized that a strip of ionic polymer- metal composite (IPMC) exhibits a spontaneous bending capability under the influence of an electric potential. A key observation is the appearance and disappearance of water on the expansion and contraction surfaces of the strip, respectively. Such water appearing/disappearing activities occur near the permeable metal electrodes. The imposition of en elctric field causes the mobile cations that are conjugated to the polymeric anions to undergo electrophoretic dynamic migration that can result in local deformation of the material. Such an electrophoretic behavior of the IPMC causes the water to leak out of the permeable electroded boundary so as to lower the actuation performance. This situation is similar to a leaking hydraulic actuator (hydraulic jack), which has the highest force density notwithstanding the compressor unit weight. Herein, a new category of actuators as ionic polymeric hydraulic actuators (IPHA's) is defined. The IPMC is a good example of such ionic polymeric hydraulic actuators. The advantage of ionic polymeric hydraulic actuators is their potential to generate substantially high force densities, theoretically better than current hydraulic actuators. Based upon this ionic polymer hydraulic actuator concept, a certain manufacturing technique was developed to increase the force density of the conventional IPMC's by a factor of two (100% improvement in force). This technology and associated experimental results are presented in this paper.

  1. Novel polymeric materials from triglycerides

    Science.gov (United States)

    Triglycerides are good platforms for new polymeric products that can substitute for petroleum-based materials. As part of our research emphasis in sustainability and green polymer chemistry, we have explored a number of reactions in efforts to produce a wide range of value-added products. In this ...

  2. Thermal Polymerization of N-Butyl Acrylate

    Science.gov (United States)

    Ingham, J. D.

    1982-01-01

    Simple new polymerization method enables production of n-butyl acrylate polymer of desired high molecular weight, without disadvantages that usually attend more conventional methods. Process, which is hybrid of thermal, solution, and emulsion polymerization methods, involves controlled thermal polymerization of monomer at moderate temperatures without use of catalysts or additives.

  3. Glycine Polymerization on Oxide Minerals

    Science.gov (United States)

    Kitadai, Norio; Oonishi, Hiroyuki; Umemoto, Koichiro; Usui, Tomohiro; Fukushi, Keisuke; Nakashima, Satoru

    2017-06-01

    It has long been suggested that mineral surfaces played an important role in peptide bond formation on the primitive Earth. However, it remains unclear which mineral species was key to the prebiotic processes. This is because great discrepancies exist among the reported catalytic efficiencies of minerals for amino acid polymerizations, owing to mutually different experimental conditions. This study examined polymerization of glycine (Gly) on nine oxide minerals (amorphous silica, quartz, α-alumina and γ-alumina, anatase, rutile, hematite, magnetite, and forsterite) using identical preparation, heating, and analytical procedures. Results showed that a rutile surface is the most effective site for Gly polymerization in terms of both amounts and lengths of Gly polymers synthesized. The catalytic efficiency decreased as rutile > anatase > γ-alumina > forsterite > α- alumina > magnetite > hematite > quartz > amorphous silica. Based on reported molecular-level information for adsorption of Gly on these minerals, polymerization activation was inferred to have arisen from deprotonation of the NH3 + group of adsorbed Gly to the nucleophilic NH2 group, and from withdrawal of electron density from the carboxyl carbon to the surface metal ions. The orientation of adsorbed Gly on minerals is also a factor influencing the Gly reactivity. The examination of Gly-mineral interactions under identical experimental conditions has enabled the direct comparison of various minerals' catalytic efficiencies and has made discussion of polymerization mechanisms and their relative influences possible Further systematic investigations using the approach reported herein (which are expected to be fruitful) combined with future microscopic surface analyses will elucidate the role of minerals in the process of abiotic peptide bond formation.

  4. Polymeric Nanofibers in Tissue Engineering

    Science.gov (United States)

    Dahlin, Rebecca L.; Kasper, F. Kurtis

    2011-01-01

    Polymeric nanofibers can be produced using methods such as electrospinning, phase separation, and self-assembly, and the fiber composition, diameter, alignment, degradation, and mechanical properties can be tailored to the intended application. Nanofibers possess unique advantages for tissue engineering. The small diameter closely matches that of extracellular matrix fibers, and the relatively large surface area is beneficial for cell attachment and bioactive factor loading. This review will update the reader on the aspects of nanofiber fabrication and characterization important to tissue engineering, including control of porous structure, cell infiltration, and fiber degradation. Bioactive factor loading will be discussed with specific relevance to tissue engineering. Finally, applications of polymeric nanofibers in the fields of bone, cartilage, ligament and tendon, cardiovascular, and neural tissue engineering will be reviewed. PMID:21699434

  5. SCATTERING FROM RAMIFIED POLYMERIC SYSTEMS

    Directory of Open Access Journals (Sweden)

    M.Benhamou

    2004-01-01

    Full Text Available Here, of great interest to us is a quantitative study of the scattering properties from ramified polymeric systems of arbitrary topology. We consider three types of systems, namely ramified polymers in solution, ramified polymer blends, or ternary mixtures made of two ramified polymers of different chemical nature immersed in a good solvent. To achieve the goal of the study, use is made of the Random Phase Approximation. First we determine the exact expression of the form factor of an ideal ramified polymer of any topology, from which we extract the exact expression of its gyration radius. Using the classical Zimm's formulae and the exact form factor, we determine all scattering properties of these three types of ramified polymeric systems. The main conclusion is that ramification of the chains induces drastic changes of the scattering properties.

  6. Electroactive Polymeric Materials for Supercapacitors

    Science.gov (United States)

    2017-06-16

    solvent resistant (SR) polymers that are insoluble, while retaining high redox activity, in both organic and aqueous electrolytes. The polymers are...FINAL REPORT Electroactive Polymeric Materials for Supercapacitors N00014-14-1-0399 John R. Reynolds School of Chemistry and Biochemistry...program was directed to the use of conjugated and highly electroactive polymers (EAPs) as the active redox materials in electrochemical supercapacitors

  7. Two Photon Polymerization of Ormosils

    Science.gov (United States)

    Matei, A.; Zamfirescu, M.; Jipa, F.; Luculescu, C.; Dinescu, M.; Buruiana, E. C.; Buruiana, T.; Sima, L. E.; Petrescu, S. M.

    2010-10-01

    In this work, 3D structures of hybrid polymers—ORMOSILS (organically modified silicates) were produced via Two Photon Polymerization (2PP) of hybrid methacrylates based on silane derivates. Synthetic routes have been used to obtain series of hybrid monomers, their structure and purity being checked by NMR Spectroscopy and Fourier Transform Infrared Spectroscopy. Two photon polymerization method (a relatively new technology which allows fast micro and nano processing of three-dimensional structures with application in medical devices, tissue scaffolds, photonic crystals etc) was used for monomers processing. As laser a Ti: Sapphire laser was used, with 200 fs pulse duration and 2 kHz repetition rate, emitting at 775 nm. A parametric study on the influence of the processing parameters (laser fluence, laser scanning velocity, photo initiator) on the written structures was carried out. The as prepared polymeric scaffolds were tested in mesenchymal stem cells and fibroblasts cell cultures, with the aim of further obtaining bone and dermal grafts. Cells morphology, proliferation, adhesion and alignment were analyzed for different experimental conditions.

  8. Non-equilibrium supramolecular polymerization.

    Science.gov (United States)

    Sorrenti, Alessandro; Leira-Iglesias, Jorge; Markvoort, Albert J; de Greef, Tom F A; Hermans, Thomas M

    2017-09-18

    Supramolecular polymerization has been traditionally focused on the thermodynamic equilibrium state, where one-dimensional assemblies reside at the global minimum of the Gibbs free energy. The pathway and rate to reach the equilibrium state are irrelevant, and the resulting assemblies remain unchanged over time. In the past decade, the focus has shifted to kinetically trapped (non-dissipative non-equilibrium) structures that heavily depend on the method of preparation (i.e., pathway complexity), and where the assembly rates are of key importance. Kinetic models have greatly improved our understanding of competing pathways, and shown how to steer supramolecular polymerization in the desired direction (i.e., pathway selection). The most recent innovation in the field relies on energy or mass input that is dissipated to keep the system away from the thermodynamic equilibrium (or from other non-dissipative states). This tutorial review aims to provide the reader with a set of tools to identify different types of self-assembled states that have been explored so far. In particular, we aim to clarify the often unclear use of the term "non-equilibrium self-assembly" by subdividing systems into dissipative, and non-dissipative non-equilibrium states. Examples are given for each of the states, with a focus on non-dissipative non-equilibrium states found in one-dimensional supramolecular polymerization.

  9. Molecular weight control in organochromium olefin polymerization catalysis by hemilabile ligand–metal interactions

    Directory of Open Access Journals (Sweden)

    Stefan Mark

    2016-07-01

    Full Text Available A series of Cr(III complexes based on quinoline-cyclopentadienyl ligands with additional hemilabile side arms were prepared and used as single-site catalyst precursors for ethylene polymerization. The additional donor functions interact with the metal centers only after activation with the co-catalyst. Evidence for this comes from DFT-calculations and from the differing behavior of the complexes in ethylene polymerization. All complexes investigated show very high catalytic activity and the additional side arm minimizes chain-transfer reactions, leading to increase of molecular weights of the resulting polymers.

  10. Evolution of Surface Nanopores in Pressurised Gyrospun Polymeric Microfibers

    Directory of Open Access Journals (Sweden)

    U. Eranka Illangakoon

    2017-10-01

    Full Text Available The selection of a solvent or solvent system and the ensuing polymer–solvent interactions are crucial factors affecting the preparation of fibers with multiple morphologies. A range of poly(methylmethacrylate fibers were prepared by pressurised gyration using acetone, chloroform, N,N-dimethylformamide (DMF, ethyl acetate and dichloromethane as solvents. It was found that microscale fibers with surface nanopores were formed when using chloroform, ethyl acetate and dichloromethane and poreless fibers were formed when using acetone and DMF as the solvent. These observations are explained on the basis of the physical properties of the solvents and mechanisms of pore formation. The formation of porous fibers is caused by many solvent properties such as volatility, solubility parameters, vapour pressure and surface tension. Cross-sectional images show that the nanopores are only on the surface of the fibers and they were not inter-connected. Further, the results show that fibers with desired nanopores (40–400 nm can be prepared by carefully selecting the solvent and applied pressure in the gyration process.

  11. Pressure-induced polymerization in substituted acetylenes

    Energy Technology Data Exchange (ETDEWEB)

    Chellappa, Raja S.; Dattelbaum, Dana M.; Sheffield, Stephen; Robbins, David (LANL)

    2012-04-10

    A fundamental understanding of shock-induced chemical reactions in organics is still lacking and there are limited studies devoted to determining reaction mechanisms, evolution of bonding, and effect of functional group substitutions. The fast timescale of reactions occurring during shock compression create significant experimental challenges (diagnostics) to fully quantify the mechanisms involved. Static compression combined with temperature provides a complementary route to investigate the equilibrium phase space and metastable intermediates under extreme P-T conditions. In this study, we present our results from our ongoing high pressure in situ synchrotron x-ray diffraction experiments on substituted acetylenes: tert-butyl acetylene [TBA: (CH{sub 3}){sub 3}-C=CH] and ethynyl trimethylsilane [ETMS: (CH{sub 3}){sub 3}-SiC=CH]. We observed that the onset pressure of chemical reactions (at room temperature) in these compounds is higher under static compression (TBA: 12 GPa and ETMS: 17.6 GPa) when compared to shock input pressures (TBA: 6.1 GPa and ETMS: 6.6 GPa). At elevated temperatures, reactivity was observed to occur at pressures comparable to shock conditions. The products were polymeric in nature, recovered to ambient conditions with little degradation.

  12. Morbidade da esquistossomose mansoni no Brasil: III Estudo evolutivo em uma área endêmica no período de dez anos Morbidity of schistosomiasis mansoni in Brazil. III.Evolutive study in an endemic area in a period of 10 years

    Directory of Open Access Journals (Sweden)

    José Rodrigues Coura

    1984-12-01

    conta própria.Four cross sectional studies on morbidity of schistosomiasis mansoni were carried out respectively in 1973, 1974, 1979 and 1983 in the Village of Capitão Andrade, District of Itanhomi, State of Minas Gerais, Brazil, through clinical and fecal examination of the population. In addition a comparison was made of the dinamic and infection rate of the snails and the man-water contact between 1973-1974. The present study compares the prevalence of the human infection by S. mansoni and the evolutive pattern of the disease in the area from 1973 to 1983. besides 190 persons infected with S. mansoni and 134 non-infected, were followed-up during this period. The infection rate was 60.8% among 1,234 persons examined in 1973,, decreasing to 36.2% of the 1,269 examined in 1983. However, the intense migration of the population in the area and the specific treatment of 7% of person by their own decision may be partially responsible for this reduction. Although there was a decrease of more than 50% in the mean egg output of S. mansoni, there was no change in the morbility of the disease and in the proportion of the different clinical forms. The incidence of S. mansoni infection among 134 persons followed-up during the ten years was 40.3% (annual average of 4%, with 61.9% in males. The incidence of the clinical forms was 51.8% for type I (intestinal form, 38.9% for type II (hepatointestinal and 9.3% for type III (hepatoesplenic. The clinical evolutive pattern of 190 patients followed-up during the mentioned period showed that 75.3% had no change, 12.1% deteriored and 12,6% improved. two thirds of those which improved (8.4% had receveid specific treatment.

  13. Polymerization and polymerization shrinkage stress: fast cure versus conventional cure.

    Science.gov (United States)

    Strydom, C

    2005-07-01

    Dentists nowadays have a choice of conventional halogen lights, halogen lights with more sophisticated curing cycles (step-cure, rapid-cure, ramp-cure & pulse-cure), fast halogen lights, laser lights, plasma arc lights (PAC) and, lately, LED lights. While the manufacturers of some of the curing units try to improve on the operational reliability of their lights with a slower initial rate of cure, other manufacturers simply wish to offer as fast a curing time as possible. The conventional approach to cure accepts that sufficient light intensity of at least 400 mW/cm2 at a wavelength of 400-500 nm, and an exposure time of at least 40 seconds is needed to cure a 2-mm layer of composite. When a halogen light with higher or very high intensity is used, alternative curing strategies provide for an initial slower cure to allow flow, and after that a higher-intensity cure to improve the degree of cure. In contrast, in the fast-cure or rapid-cure approach it is suggested that a layer of composite can be cured for only 5- 10 seconds at >2000 mW/cm2. Some go so far as to say that an exposure time of 3 seconds per layer may be enough. This contradictory approach is compounded by the fact that this support for fast cure does not seem to consider the negative consequences. Therefore, to address these concerns, this review discusses the possible effects of a fast cure approach compared to a more conventional approach in polymerization and polymerization shrinkage, and the consequences there-off. Other factors that play an influencing role in polymerization shrinkage stress are also included in the discussion.

  14. [Napoleon III's urogenital disease (1808-1873)].

    Science.gov (United States)

    Androutsos, G

    2000-02-01

    We tried through this paper to reconstitute the evolution of the urologic illness of Napoleon III, last emperor of France, the first symptoms of which appeared many years before the fatal war of 1870, which led to the dismembering of France. In this connection, we present Napoleon III's physicians and his cures, along with the diagnostic and therapeutic errors. The case of Napoleon III is a typical example of the influence the bad health of a sovereign can exercise on the destiny of his country.

  15. Radical polymerization in holographic grating formation in PQ-PMMA photopolymer part I: Short exposure

    Science.gov (United States)

    Yu, Dan; Liu, Hongpeng; Geng, Yaohui; Wang, Weibo; Zhao, Yuanyuan

    2014-11-01

    Photochemical radical polymerization in phenathrenequinone doped poly(methyl methacrylate) photopolymer are investigated theoretically and experimentally at short exposure. In experiments, the dynamic evolution of diffraction efficiency in grating formation is measured. Based on the rate equations of chemical reactions, the analytical expressions of components evolution are deduced to compare the contributions of several photochemical processes to the grating formation. The percentages of these radical polymerizations, namely the polymerization of one PQ with one matrix molecule, the bimolecular combination of MMA molecules, and the disproportionation of MMA molecules, are extracted quantitatively by nonlinear fitting experimental curves. Furthermore, the kinetics parameters, quantum yield Φ and molar absorption coefficient ε of photosensitizers, are determined to demonstrate the rationality of chemical processes. The theoretical results indicate that the polymerization of PQ with matrix is primary photochemical process which dominated the grating formation at short exposure. The contribution of chain polymerization of MMA molecules on the grating can be neglected. This investigation can provide a significant foundation for improving holographic characteristics by photochemical mechanism.

  16. Polymeric slot waveguide for photonics sensing

    Science.gov (United States)

    Chovan, J.; Uherek, F.

    2016-12-01

    Polymeric slot waveguide for photonics sensing was designed, simulated and studied in this work. The polymeric slot waveguide was designed on commercial Ormocer polymer platform and operates at visible 632.8 nm wavelength. Designed polymeric slot waveguide detects the refractive index change of the ambient material by evanescent field label-free techniques. The motivation for the reported work was to design a low-cost polymeric slot waveguide for sensing arms of integrated Mach-Zehnder interferometer optical sensor with reduced temperature dependency. The minimal dimensions of advanced sensing slot waveguide structure were designed for researcher direct laser writing fabrication by nonlinear two-photon polymerization. The normalized effective refractive index changes of TE and TM fundamental modes in polymeric slot waveguide and slab waveguides were compared. The sensitivity of the normalized effective refractive index changes of TE and TM fundamental modes on refractive index changes of the ambient material was investigated by glucose-water solutions.

  17. Nanoporous Polymeric Grating-Based Biosensors

    KAUST Repository

    Gao, Tieyu

    2012-05-02

    We demonstrate the utilization of an interferometrically created nanoporous polymeric gratings as a platform for biosensing applications. Aminopropyltriethoxysilane (APTES)-functionalized nanoporous polymeric gratings was fabricated by combining holographic interference patterning and APTES-functionalization of pre-polymer syrup. The successful detection of multiple biomolecules indicates that the biofunctionalized nanoporous polymeric gratings can act as biosensing platforms which are label-free, inexpensive, and applicable as high-throughput assays. Copyright © 2010 by ASME.

  18. High Vacuum Techniques for Anionic Polymerization

    KAUST Repository

    Ratkanthwar, Kedar

    2015-09-01

    Anionic polymerization high vacuum techniques (HVTs) are the most suitable for the preparation of polymer samples with well-defined complex macromolecular architectures. Though HVTs require glassblowing skill for designing and making polymerization reactor, it is the best way to avoid any termination of living polymers during the number of steps for the synthesis of polymers with complex structure. In this chapter, we describe the different polymerization reactors and HVTs for the purification of monomers, solvents, and other reagents for anionic polymerization as well as few model reactions for the synthesis of polymers with simple to complex structure.

  19. Assessment of Fe(III) and Eu(III) complexation by silicate in aqueous solutions

    Science.gov (United States)

    Patten, James T.; Byrne, Robert H.

    2017-04-01

    Prior investigations of Eu3+ complexation by silicate have led to predictions that rare earth silicate complexes (REESiO(OH)32+) are the dominant species of REEs in deep waters of the Atlantic and Pacific Oceans. The proposed importance of REE-silicate complexes has been used as a foundation to explain oceanic REE profiles. In the present work, we examine the significance of rare earth element complexation by silicate ions. As one fundamental means of assessing prior depictions of REE-silicate formation constant behavior, our work examines the comparative stability constant behavior of Eu(III) and Fe(III). Plots of Eu(III) complexation constants against Fe(III) formation constants, in conjunction with experimental determinations of FeSiO(OH)32+ formation constants, indicate that previously published EuSiO(OH)32+ formation constants are substantially overestimated. Assessment of prior EuSiO(OH)32+ formation constant determinations reveals that results obtained in the presence and absence of silicic acid polymerization are inconsistent. Much larger EuSiO(OH)32+ formation constants are obtained in the presence of polymeric silica. Reanalysis of complexation results obtained under conditions of minimal silicate polymerization leads to a EuSiO(OH)32+ formation constant that is smaller than previously published estimates by as much as a factor of ∼25. The dramatically reduced magnitude of Siβ1(Eu) relative to previously published results indicates that the role of silicate complexation in oceanic REE cycling is much less significant than previously proposed. The spectrophotometric investigations of FeSiO(OH)32+ formation in the present study yield the first characterization of FeSiO(OH)32+ formation constant behavior as a function of ionic strength:

  20. Twin screw extruders as polymerization reactors for a free radical homo polymerization

    NARCIS (Netherlands)

    Ganzeveld, K.J.; Janssen, L.P.B.M.

    The bulk polymerization of n-butylmethacrylate was investigated in a counter-rotating twin screw extruder. It appeared that the gel effect, occurring with bulk polymerizations, affected the polymerization progress very strongly. Due to this effect the conversion of the reaction is independent of the

  1. Schlenk Techniques for Anionic Polymerization

    KAUST Repository

    Ratkanthwar, Kedar

    2015-09-01

    Anionic polymerization-high vacuum techniques (HVTs) are doubtlessly the most prominent and reliable experimental tools to prepare polymer samples with well-defined and, in many cases, complex macromolecular architectures. Due to the high demands for time and skilled technical personnel, HVTs are currently used in only a few research laboratories worldwide. Instead, most researchers in this filed are attracted to more facile Schlenk techniques. The basic principle of this technique followed in all laboratories is substantially the same, i.e. the use of alternate vacuum and inert gas atmosphere in glass apparatus for the purification/charging of monomer, solvents, additives, and for the manipulation of air-sensitive compounds such as alkyl metal initiators, organometallic or organic catalysts. However, it is executed quite differently in each research group in terms of the structure of Schlenk apparatus (manifolds, connections, purification/storage flasks, reactors, etc.), the use of small supplementary devices (soft tubing, cannulas, stopcocks, etc.) and experimental procedures. The operational methods are partly purpose-oriented while also featured by a high flexibility, which makes it impossible to describe in detail each specific one. In this chapter we will briefly exemplify the application of Schlenk techniques for anionic polymerization by describing the performance of a few experiments from our own work.

  2. Integration of CuAAC Polymerization and Controlled Radical Polymerization into Electron Transfer Mediated "Click-Radical" Concurrent Polymerization.

    Science.gov (United States)

    Xue, Wentao; Wang, Jie; Wen, Ming; Chen, Gaojian; Zhang, Weidong

    2017-03-01

    The successful chain-growth copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) polymerization employing Cu(0)/pentamethyldiethylenetriamine (PMDETA) and alkyl halide as catalyst is first investigated by a combination of nuclear magnetic resonance, gel-permeation chromatography, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. In addition, the electron transfer mediated "click-radical" concurrent polymerization utilizing Cu(0)/PMDETA as catalyst is successfully employed to generate well-defined copolymers, where controlled CuAAC polymerization of clickable ester monomer is progressed in the main chain acting as the polymer backbone, the controlled radical polymerization (CRP) of acrylic monomer is carried out in the side chain. Furthermore, it is found that there is strong collaborative effect and compatibility between CRP and CuAAC polymerization to improve the controllability. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. The Stabilizer-Free Emulsion Polymerization

    NARCIS (Netherlands)

    Dobrowolska, M.E.

    2013-01-01

    The research described in this thesis has been performed with the goal to understand and develop a method for stabilizer-free emulsion polymerization. In order to develop rules for this method, three main issues had to be understood: colloidal stability, emulsification method and polymerization

  4. Thermal bulk polymerization of cholesteryl acrylate

    NARCIS (Netherlands)

    de Visser, A.C.; de Groot, K.; Feijen, Jan; Bantjes, A.

    1971-01-01

    The thermal bulk polymerization of cholesteryl acrylate was carried out in the solid phase, the mesomorphic phase, and the liquid phase to study the effect of monomer ordering on polymerization rate and polymer properties. The rate increased with decreasing ordering (or enhanced mobility) of the

  5. Fluid Effects in Polymers and Polymeric Composites

    CERN Document Server

    Weitsman, Y Jack

    2012-01-01

    Fluid Effects in Polymers and Polymeric Composites, written by the late Dr. Y. Jack Weitsman, addresses the wide range of parameters that affect the interaction of fluids with polymers and polymeric composites. The book aims at broadening the scope of available data, mostly limited up to this time to weight-gain recordings of fluid ingress into polymers and composites, to the practical circumstances of fluctuating exposure. Various forms of experimental data are given, in conjunction with theoretical models derived from basic scientific principles, and correlated with severity of exposure conditions and interpreted by means of rationally based theoretical models. The practical implications of the effects of fluids are discussed. The issue of fluid effects on polymers and polymeric composites is of concern to engineers and scientists active in aerospace and naval structures, as an increasing portion of these structures are made of polymeric composites and employ polymeric adhesives as a joining device. While...

  6. Antithrombin III blood test

    Science.gov (United States)

    ... medlineplus.gov/ency/article/003661.htm Antithrombin III blood test To use the sharing features on this page, ... a protein that helps control blood clotting. A blood test can determine the amount of AT III present ...

  7. Hemoglobin: Modification, Crystallization, Polymerization (Review

    Directory of Open Access Journals (Sweden)

    V. A. Sergunova

    2016-01-01

    Full Text Available The purpose of this review is to present the most significant modifications and transformations of a hemoglobin molecule potentially related to developing a strategy of resuscitation and treatment of lifethreatening forms of anemia. Hemoglobin is one of the wellstudied proteins. The paper reviews the history of hemoglobin studies from 1839 untill present. Methodically, the hemoglobin studies included electrophoresis, spectrophotometric method, Xray diffraction method, atomicforce microscopy. The basic forms of hemoglobin include oxyhemoglobin, deoxyhemoglobin and methemoglobin. Data on protein crystallization and polymerization are discussed. Many forms of hemoglobin have the ability to form crystals or polymers in vitro, some pathological forms can be modified in vivo. The studies of structural features of various hemoglobin forms represent a contemporary task for fundamental researches.

  8. Positron studies of polymeric coatings

    Energy Technology Data Exchange (ETDEWEB)

    Jean, Y.C. E-mail: jeany@umkc.edu; Mallon, P.E.; Zhang, R.; Chen Hongmin; Li Ying; Zhang Junjie; Wu, Y.C.; Sandreczki, T.C.; Suzuki, R.; Ohdaira, T.; Gu, X.; Nguyen, T

    2003-11-01

    In complicated coating systems, positrons have shown sensitivity in detecting the early stage of deterioration due to weathering, specially, in probing a specific location or depth of coatings from the surface through interfaces and the bulk. Existing extensive experimental positron data show that positron annihilation signals respond quantitatively to the deterioration process due to weathering. Now it is possible to detect the very early stage of coating deterioration at the atomic and molecular scale by using positrons, typically in days as compared to years by conventional methods. This paper summarizes recent positron studies in polymeric coatings. Correlations between positron data and a variety of chemical, physical and engineering data from ESR, AFM, cross-link density, gloss, and cyclic loading are presented.

  9. A synchrotron infrared absorption study of pressure induced polymerization of acrylamide

    Science.gov (United States)

    Bhatt, Himal; Deo, M. N.

    2017-10-01

    The hydrogen bonded dimeric structure of the model amide based molecular crystal acrylamide has been investigated under pressure using micro-spectroscopy, employing synchrotron infrared radiation up to 24 GPa at room temperature. The high pressure spectra indicate systematic evolution of new features above 4 GPa, which have been identified to be due to the emergence of a polymeric phase. The polymerization gets completed up to 16.8 GPa and the observed changes are found to be irreversible upon the release of pressure. The behavior of Nsbnd H stretching modes indicate that the uniform inter- and intra-dimeric interactions, rather than depicting a drastic reconstruction across the phase transition, show subtle modifications and become diverse in the high pressure polymeric phase.

  10. Hemocompatibility of Polymeric Nanostructured Surfaces

    Science.gov (United States)

    Leszczak, Victoria; Smith, Barbara S.; Popat, Ketul C.

    2013-01-01

    Tissue integration is an important property when inducing transplant tolerance, however, the hemocompatibility of the biomaterial surface also plays an important role in the ultimate success of the implant. Therefore, in order to induce transplant tolerance, it is critical to understand the interaction of blood components with the material surfaces. In this study, we have investigated the adsorption of key blood serum proteins, in vitro adhesion and activation of platelets and clotting kinetics of whole blood on flat polycaprolactone (PCL) surfaces, nanowire (NW) surfaces and nanofiber (NF) surfaces. Previous studies have shown that polymeric nanostructured surfaces improve cell adhesion, proliferation and viability; however it is unclear how these polymeric nanostructured surfaces interact with the blood and its components. Protein adsorption results indicate that while there were no significant differences in total albumin adsorption on PCL, NW and NF surfaces, NW surfaces had higher total fibrinogen and immunoglobulin-G adsorption compared to NF and PCL surfaces. In contrast, NF surfaces had higher surface FIB and IgG adsorption compared to PCL and NW surfaces. Platelet adhesion and viability studies show more adhesion and clustering of platelets on the NF surfaces as compared to PCL and NW surfaces. Platelet activation studies reveal that NW surfaces have the highest percentage of unactivated platelets, whereas NF surfaces have the highest percentage of fully activated platelets. Whole blood clotting results indicate that NW surfaces maintain an increased amount of free hemoglobin during the clotting process compared to PCL and NF surface, indicating less clotting and slower rate of clotting on their surfaces. PMID:23848447

  11. Melanosomal proteins--role in melanin polymerization.

    Science.gov (United States)

    Sharma, Savitha; Wagh, Sushama; Govindarajan, Raman

    2002-04-01

    Melanin, the major determinant of skin colour, is a tyrosine-based heteropolymer of indeterminate molecular weight. In vivo, melanin synthesis occurs within highly specialized organelles called melanosomes. Coated vesicles encapsulating the enzyme tyrosinase and tyrosinase related proteins, fuse with premelanosomes that contain structural proteins to form mature melanosomes. Coated vesicles and premelanosomes have been shown to have only melanin monomers but not the polymer. Our earlier results have clearly shown that the presence of proteins other than tyrosinase are critical for the post-tyrosinase steps of melanin polymerization at acidic pH. Proteins in melanosomes are difficult to purify because of their firm association with melanin. Thus, with progressive melanization, melanoproteins become progressively insoluble. In this paper, we discuss the isolation and purification of melanosomal proteins and their role in melanin polymerization. We have hypothesized that the initiation of polymerization and the binding of melanin to proteins are two discrete events and we have developed assays to quantify these events. Purified melanosomal proteins differ in their ability to polymerize melanin monomers. Further, we have also shown that two polypeptides (28 and 45 kDa) purified from melanosomes inhibit melanin polymerization but can bind preformed melanin. In conclusion, melanosomal proteins regulate melanin polymerization and differ in their ability to bind melanin. Polymerization and binding abilities of melanosomal proteins are specific to each protein and melanin-protein interaction is not nonspecific.

  12. Experimental conditions affecting the kinetics of aqueous HCN polymerization as revealed by UV-vis spectroscopy.

    Science.gov (United States)

    Marín-Yaseli, Margarita R; Moreno, Miguel; de la Fuente, José L; Briones, Carlos; Ruiz-Bermejo, Marta

    2017-10-12

    HCN polymerization is one of the most important and fascinating reactions in prebiotic chemistry, and interest in HCN polymers in the field of materials science is growing. However, little is known about the kinetics of the HCN polymerization process. In the present study, a first approach to the kinetics of two sets of aqueous HCN polymerizations, from NH4CN and NaCN, at middle temperatures between 4 and 38°C, has been carried out. For each series, the presence of air and salts in the reaction medium has been systematically explored. A previous kinetic analysis was conducted during the conversion of the insoluble black HCN polymers obtained as gel fractions in these precipitation polymerizations for a reaction of one month, where a limit conversion was achieved at the highest polymerization temperature. The kinetic description of the gravimetric data for this complex system shows a clear change in the linear dependence with the polymerization temperature for the reaction from NH4CN, besides a relevant catalytic effect of ammonium, in comparison with those data obtained from the NaCN series. These results also demonstrated the notable influence of air, oxygen, and the saline medium in HCN polymer formation. Similar conclusions were reached when the sol fractions were monitored by UV-vis spectroscopy, and a Hill type correlation was used to describe the polymerization profiles obtained. This technique was chosen because it provides an easy, prompt and fast method to follow the evolution of the liquid or continuous phase of the process under study. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Experimental conditions affecting the kinetics of aqueous HCN polymerization as revealed by UV-vis spectroscopy

    Science.gov (United States)

    Marín-Yaseli, Margarita R.; Moreno, Miguel; de la Fuente, José L.; Briones, Carlos; Ruiz-Bermejo, Marta

    2018-02-01

    HCN polymerization is one of the most important and fascinating reactions in prebiotic chemistry, and interest in HCN polymers in the field of materials science is growing. However, little is known about the kinetics of the HCN polymerization process. In the present study, a first approach to the kinetics of two sets of aqueous HCN polymerizations, from NH4CN and NaCN, at middle temperatures between 4 and 38 °C, has been carried out. For each series, the presence of air and salts in the reaction medium has been systematically explored. A previous kinetic analysis was conducted during the conversion of the insoluble black HCN polymers obtained as gel fractions in these precipitation polymerizations for a reaction of one month, where a limit conversion was achieved at the highest polymerization temperature. The kinetic description of the gravimetric data for this complex system shows a clear change in the linear dependence with the polymerization temperature for the reaction from NH4CN, besides a relevant catalytic effect of ammonium, in comparison with those data obtained from the NaCN series. These results also demonstrated the notable influence of air, oxygen, and the saline medium in HCN polymer formation. Similar conclusions were reached when the sol fractions were monitored by UV-vis spectroscopy, and a Hill type correlation was used to describe the polymerization profiles obtained. This technique was chosen because it provides an easy, prompt and fast method to follow the evolution of the liquid or continuous phase of the process under study.

  14. Well-defined oligosaccharide-terminated polymers from living radical polymerization.

    Science.gov (United States)

    Haddleton, D M; Ohno, K

    2000-01-01

    beta-cyclodextrin has been transformed into an initiator for copper(I)-mediated living radical polymerization via successive acetylation, ring opening, and condensation reactions. This glycoinitiator has been successfully used to prepare a range of methacrylate polymers, which show all characteristics of living polymerization. Poly(methyl methacrylate) is prepared with an Mn of 10,100 g/mol (theoretical Mn = 10,900) and polydispersity of 1.09. Excellent first-order kinetics and an evolution of mass with time are presented. Hydrophilic polymers based on poly(ethylene glycol), glucose and tertiary amine monomers are successfully prepared with terminal maltoheptose units. Polymerization of styrene results in a broadening of the polydispersity to 1.48 while maintaining good control over the Mn. The acetyl protecting groups on the maltoheptose terminal unit are easily removed in all cases to give the hydroxylated sugar, as shown by NMR. These results demonstrate the applicability of utilizing glycoinitiators as a new, versatile route to a wide range of glycopolymers. The polymerization chemistry is inert to the sugar functionality allowing glyco units to be precisely placed within a synthetic macromolecule with all the associated advantages of living polymerization.

  15. Polymeric nanoparticles: the future of nanomedicine.

    Science.gov (United States)

    Banik, Brittany L; Fattahi, Pouria; Brown, Justin L

    2016-01-01

    Polymeric nanoparticles (NPs) are one of the most studied organic strategies for nanomedicine. Intense interest lies in the potential of polymeric NPs to revolutionize modern medicine. To determine the ideal nanosystem for more effective and distinctly targeted delivery of therapeutic applications, particle size, morphology, material choice, and processing techniques are all research areas of interest. Utilizations of polymeric NPs include drug delivery techniques such as conjugation and entrapment of drugs, prodrugs, stimuli-responsive systems, imaging modalities, and theranostics. Cancer, neurodegenerative disorders, and cardiovascular diseases are fields impacted by NP technologies that push scientific boundaries to the leading edge of transformative advances for nanomedicine. © 2015 Wiley Periodicals, Inc.

  16. Spinal muscular atrophy type II (intermediary and III (Kugelberg-Welander: evolution of 50 patients with physiotherapy and hydrotherapy in a swimming pool Atrofia muscular espinhal tipo II (intermediária e III (Kugelberg-Welander: evolução de 50 pacientes com fisioterapia e hidroterapia em piscina

    Directory of Open Access Journals (Sweden)

    Márcia C. B. Cunha

    1996-09-01

    Full Text Available We added hydrotherapy to 50 patients with spinal muscular atrophy (SMA who were being treated with individual conventional physiotherapy. Hydrotherapy was performed at an approximate temperature of 30 degrees Celsius, twice a week, for thirty minutes in children and for forty-five minutes in adults during a 2-year period. The outcome derived from this combined modality of treatment was rated according to physiotherapeutic evaluations, the MMT (Manual Muscular Test, and the Barthel Ladder. Patients were reevaluated at 2-month intervals. After two years of ongoing treatment, we were able to observe that the deformities in hip, knee and foot were progressive in all SMA Type II patients, and in some Type III. Muscle strength stabilized in most SMA Type III patients, and improved in some. MMT was not done in SMA Type II. In all patients we were able to detect an improvement in the Barthel Ladder scale. This study suggests that a measurable improvement in the quality of daily living may be obtained in patients with SMA Types II and III subjected to conventional physiotherapy when associated with hydrotherapy.A hidroterapia foi realizada em SO pacientes com atrofia muscular espinhal, os quais foram também tratados com fisioterapia individual convencional. O tratamento hidroterápico foi realizado em piscina aquecida numa temperatura de aproximadamente 30° Celsius, duas vezes por semana, durante 30 minutos em crianças e 45 minutos em adultos num período de dois anos. Os benefícios deste tipo de tratamento foram avaliados de acordo com a evolução clínica, o MMT(Teste de Força Muscular e a Escala de Barthel. Os pacientes foram reavaliados a cada dois meses. Após dois anos de tratamento nós observamos que as deformidades nos quadris, joelhos e pés foram progressivas em todos os pacientes do Tipo II e em alguns do Tipo III. Houve estabilização da força muscular na maioria dos pacientes com SMA Tipo III, e melhora da força em alguns; nos

  17. Deformation and flow of polymeric materials

    CERN Document Server

    Münstedt, Helmut

    2014-01-01

    This book describes the properties of single polymer molecules and polymeric materials and the methods how to characterize them. Molar masses, molar mass distributions and branching structure are discussed in detail. These properties are decisive for a deeper understanding of structure/properties relationships of polymeric materials. This book therefore describes and discusses them in detail. The mechanical behavior as a function of time and temperature is a key subject of the book. The authors present it on the basis of many original results they have obtained in their long research careers. They present the temperature dependence of mechanical properties of various polymeric materials in a wide temperature range: from cryogenic temperatures to the melt. Besides an extensive data collection on the transitions of various different polymeric materials, they also carefully present the physical explanations of the observed phenomena. Glass transition and melting temperatures are discussed, particularly, with the...

  18. Hydrocarbon polymeric binder for advanced solid propellant

    Science.gov (United States)

    Potts, J. E. (Editor)

    1972-01-01

    A series of DEAB initiated isoprene polymerizations were run in the 5-gallon stirred autoclave reactor. Polymerization run parameters such as initiator concentration and feed rate were correlated with the molecular weight to provide a basis for molecular weight control in future runs. Synthetic methods were developed for the preparation of n-1,3-alkadienes. By these methods, 1,3-nonadiene was polymerized using DEAB initiator to give an ester-telechelic polynonadiene. This was subsequently hydrogenated with copper chromite catalyst to give a hydroxyl terminated saturated liquid hydrocarbon prepolymer having greatly improved viscosity characteristics and a Tg 18 degrees lower than that of the hydrogenated polyisoprenes. The hydroxyl-telechelic saturated polymers prepared by the hydrogenolysis of ester-telechelic polyisoprene were reached with diisocyanates under conditions favoring linear chain extension gel permeation chromatography was used to monitor this condensation polymerization. Fractions having molecular weights above one million were produced.

  19. Reverse-osmosis membranes by plasma polymerization

    Science.gov (United States)

    Hollahan, J. R.; Wydeven, T.

    1972-01-01

    Thin allyl amine polymer films were developed using plasma polymerization. Resulting dry composite membranes effectively reject sodium chloride during reverse osmosis. Films are 98% sodium chloride rejective, and 46% urea rejective.

  20. Compression Behavior of High Performance Polymeric Fibers

    National Research Council Canada - National Science Library

    Kumar, Satish

    2003-01-01

    Hydrogen bonding has proven to be effective in improving the compressive strength of rigid-rod polymeric fibers without resulting in a decrease in tensile strength while covalent crosslinking results in brittle fibers...

  1. Characterization of Magnetic Polymeric Microparticles

    Directory of Open Access Journals (Sweden)

    Kazım Köse

    2016-08-01

    Full Text Available The separation process is very important in a variety of scientific fields, especially in biochemistry and biotechnology. The separation performance of a method can be determined by the separation time and the purity of the separated molecule, which is directly proportional with the ligand chosen for the target molecule. The separation time is actually a very important step for the cost and the time-dependent analysis, especially in medical applications. Magnetic separation is a very advantageous technique because it eliminates the time-consuming sample preparation and centrifugation steps. However, the magnetic performance of adsorbent may not be strong enough to respond the magnetic force applied externally. Therefore, in nanoparticle studies, magnetic performance of nanoparticles is highly important. In this study, the magnetic performance of polymeric microparticles synthesized using different magnetic cores (Fe2O3&Fe3O4, Fe&Ni, Ni&Co, Fe&Ni&Co with a solid support, HEMA (2-hydroxyl ethylmethacrylate, and a functional monomer, AdeM (adenine methacrylate, were compared. Some other properties such as size, zeta potential, surface morphology, etc. were also studied.

  2. Characterization of Polymeric Nanofiltration Membranes

    Directory of Open Access Journals (Sweden)

    Simoncic, B.

    2007-11-01

    Full Text Available As membrane processes are increasingly used in industrial applications, there is a growing interest in methods of membrane characterization. Traditional membrane characteristics, such as cut-off value and pore size distribution, are being supplemented by membrane surface characteristics, such as charge density or zeta potential and hydrophobicity. This study, therefore, characterizes the three different polymeric membranes used (NFT-50, DL and DK. The molecular mass cut-off (MMCO value was determined using a set of reference solutes within the molecular range 150-600 Da, whereas streaming potential measurements enabled quantification of the surface charge characteristics. Hydrophobicity was studied using contact angle measurements. The results indicated that even though all three membranes had very similar layer compositions which consisted of poly(piperazneamide, as top layers they showed different values of measured quantitive. The NFT-50 membrane had the lowest MMCO value and the most hydrophilic membrane surface, followed by DK and DL. Membrane fouling as measured by flux reduction was determined by streaming potential measurements and accompanied by a positive change in zeta potential.

  3. Physicochemical characteristics and microbial community evolution of biofilms during the start-up period in a moving bed biofilm reactor.

    Science.gov (United States)

    Zhu, Yan; Zhang, Yan; Ren, Hong-Qiang; Geng, Jin-Ju; Xu, Ke; Huang, Hui; Ding, Li-Li

    2015-03-01

    This study aimed to investigate biofilm properties evolution coupled with different ages during the start-up period in a moving bed biofilm reactor system. Physicochemical characteristics including adhesion force, extracellular polymeric substances (EPS), morphology as well as volatile solid and microbial community were studied. Results showed that the formation and development of biofilms exhibited four stages, including (I) initial attachment and young biofilm formation, (II) biofilms accumulation, (III) biofilm sloughing and updating, and (IV) biofilm maturation. During the whole start-up period, adhesion force was positively and significantly correlated with the contents of EPS, especially the content of polysaccharide. In addition, increased adhesion force and EPS were beneficial for biofilm retention. Gram-negative bacteria mainly including Sphaerotilus, Zoogloea and Haliscomenobacter were predominant in the initial stage. Actinobacteria was beneficial to resist sloughing. Furthermore, filamentous bacteria were dominant in maturation biofilm. Copyright © 2015 Elsevier Ltd. All rights reserved.

  4. Sono-RAFT Polymerization in Aqueous Medium.

    Science.gov (United States)

    McKenzie, Thomas G; Colombo, Enrico; Fu, Qiang; Ashokkumar, Muthupandian; Qiao, Greg G

    2017-09-25

    The ultrasonic irradiation of aqueous solution is demonstrated to be a suitable source of initiating radicals for a controlled radical polymerization when conducted in the presence of a thiocarbonylthio-containing reversible addition-fragmentation chain transfer (RAFT) agent. This allows for a highly "green" method of externally regulated/controlled polymerization with a potentially broad scope for polymerizable monomers and/or polymer structures. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Post polymerization cure shape memory polymers

    Science.gov (United States)

    Wilson, Thomas S; Hearon, Michael Keith; Bearinger, Jane P

    2014-11-11

    This invention relates to chemical polymer compositions, methods of synthesis, and fabrication methods for devices regarding polymers capable of displaying shape memory behavior (SMPs) and which can first be polymerized to a linear or branched polymeric structure, having thermoplastic properties, subsequently processed into a device through processes typical of polymer melts, solutions, and dispersions and then crossed linked to a shape memory thermoset polymer retaining the processed shape.

  6. Volumetric polymerization shrinkage of contemporary composite resins

    Directory of Open Access Journals (Sweden)

    Halim Nagem Filho

    2007-10-01

    Full Text Available The polymerization shrinkage of composite resins may affect negatively the clinical outcome of the restoration. Extensive research has been carried out to develop new formulations of composite resins in order to provide good handling characteristics and some dimensional stability during polymerization. The purpose of this study was to analyze, in vitro, the magnitude of the volumetric polymerization shrinkage of 7 contemporary composite resins (Definite, Suprafill, SureFil, Filtek Z250, Fill Magic, Alert, and Solitaire to determine whether there are differences among these materials. The tests were conducted with precision of 0.1 mg. The volumetric shrinkage was measured by hydrostatic weighing before and after polymerization and calculated by known mathematical equations. One-way ANOVA (a or = 0.05 was used to determine statistically significant differences in volumetric shrinkage among the tested composite resins. Suprafill (1.87±0.01 and Definite (1.89±0.01 shrank significantly less than the other composite resins. SureFil (2.01±0.06, Filtek Z250 (1.99±0.03, and Fill Magic (2.02±0.02 presented intermediate levels of polymerization shrinkage. Alert and Solitaire presented the highest degree of polymerization shrinkage. Knowing the polymerization shrinkage rates of the commercially available composite resins, the dentist would be able to choose between using composite resins with lower polymerization shrinkage rates or adopting technical or operational procedures to minimize the adverse effects deriving from resin contraction during light-activation.

  7. From Living Carbocationic to Living Radical Polymerization.

    Science.gov (United States)

    1994-06-30

    one another because of electrostatic repulsions. On the other hand, free radicals, which are the growing species in radical polymerization, very easily...1) degrees of polymerization will be observed. In ionic reactions, active species with various reactivities coexist ( free ions, ion pairs...between the active and dormant speches Is fast. In real systems, chain-breaking reactions do occur and cannot be entirely b avoided; bimolecular

  8. Post polymerization cure shape memory polymers

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, Thomas S.; Hearon, II, Michael Keith; Bearinger, Jane P.

    2017-01-10

    This invention relates to chemical polymer compositions, methods of synthesis, and fabrication methods for devices regarding polymers capable of displaying shape memory behavior (SMPs) and which can first be polymerized to a linear or branched polymeric structure, having thermoplastic properties, subsequently processed into a device through processes typical of polymer melts, solutions, and dispersions and then crossed linked to a shape memory thermoset polymer retaining the processed shape.

  9. Polymerization shrinkage evaluation of three packable composite resins using a gas pycnometer

    OpenAIRE

    Amore, Ricardo; Pagani, Clóvis; Youssef, Michel Nicolau; Anauate Netto, Camillo; Lewgoy, Hugo Roberto

    2003-01-01

    Modern restorative dentistry has been playing an outstanding role lately since composite resins, allied to adhesive systems, have been widely applied on anterior and posterior teeth restorations. The evolution of composite resins has mostly been verified due to the improvement of their aesthetic behavior and the increase in their compressive and abrasive strengths. In spite of these developments, the polymerization shrinkage inherent to the material has been a major deficiency that, so far, h...

  10. Polymerization shrinkage evaluation of three packable composite resins using a gas pycnometer.

    OpenAIRE

    Amore, Ricardo; Pagani, Clóvis; Youssef, Michel Nicolau; Anauate Netto, Camillo; Lewgoy, Hugo Roberto

    2003-01-01

    Modern restorative dentistry has been playing an outstanding role lately since composite resins, allied to adhesive systems, have been widely applied on anterior and posterior teeth restorations. The evolution of composite resins has mostly been verified due to the improvement of their aesthetic behavior and the increase in their compressive and abrasive strengths. In spite of these developments, the polymerization shrinkage inherent to the material has been a major deficiency that, so far, h...

  11. Detonation behavior of emulsion explosives sensitized with polymeric microballoons

    Science.gov (United States)

    Mendes, Ricardo; Ribeiro, José; Plaksin, Igor; Campos, José

    2013-06-01

    The differences between the detonation behavior of ammonium nitrate based emulsion explosive sensitized with polymeric or with glass microballoons is presented and discussed. Expancel® are hollow polymeric microballoons that contain a hydrocarbon gas. The mean particle size of those particles is 30 μm and their wall thickness is about 0.1 μm. The detonation velocity and the failure diameter of the emulsion explosive sensitized with different amounts of these particles were measured, in cylindrical charges, by ionization pins and optical fibers. The detonation velocity of emulsion explosives shows a non-monotonic evolution with the density with the maximum being reached far below the maximum density. The detonation fails when the density approaches the one of the matrix. The failure diameter increases with increasing density. For low densities the detonation velocity is almost independent of the charge diameter and it is close to the values predict by BKW EoS. The effect of the nature and size of the microballoons on the detonation front curvature and failure diameter was also determined.

  12. The tempered polymerization of human neuroserpin.

    Directory of Open Access Journals (Sweden)

    Rosina Noto

    Full Text Available Neuroserpin, a member of the serpin protein superfamily, is an inhibitor of proteolytic activity that is involved in pathologies such as ischemia, Alzheimer's disease, and Familial Encephalopathy with Neuroserpin Inclusion Bodies (FENIB. The latter belongs to a class of conformational diseases, known as serpinopathies, which are related to the aberrant polymerization of serpin mutants. Neuroserpin is known to polymerize, even in its wild type form, under thermal stress. Here, we study the mechanism of neuroserpin polymerization over a wide range of temperatures by different techniques. Our experiments show how the onset of polymerization is dependent on the formation of an intermediate monomeric conformer, which then associates with a native monomer to yield a dimeric species. After the formation of small polymers, the aggregation proceeds via monomer addition as well as polymer-polymer association. No further secondary mechanism takes place up to very high temperatures, thus resulting in the formation of neuroserpin linear polymeric chains. Most interesting, the overall aggregation is tuned by the co-occurrence of monomer inactivation (i.e. the formation of latent neuroserpin and by a mechanism of fragmentation. The polymerization kinetics exhibit a unique modulation of the average mass and size of polymers, which might suggest synchronization among the different processes involved. Thus, fragmentation would control and temper the aggregation process, instead of enhancing it, as typically observed (e.g. for amyloid fibrillation.

  13. Co(II)1-xCo(0)x/3Mn(III)2x/3S Nanoparticles Supported on B/N-Codoped Mesoporous Nanocarbon as a Bifunctional Electrocatalyst of Oxygen Reduction/Evolution for High-Performance Zinc-Air Batteries.

    Science.gov (United States)

    Wang, Zilong; Xiao, Shuang; An, Yiming; Long, Xia; Zheng, Xiaoli; Lu, Xihong; Tong, Yexiang; Yang, Shihe

    2016-06-01

    Rechargeable Zn-air battery is an ideal type of energy storage device due to its high energy and power density, high safety, and economic viability. Its large-scale application rests upon the availability of active, durable, low-cost electrocatalysts for the oxygen reduction reaction (ORR) in the discharge process and oxygen evolution reaction (OER) in the charge process. Herein we developed a novel ORR/OER bifunctional electrocatalyst for rechargeable Zn-air batteries based on the codoping and hybridization strategies. The B/N-codoped mesoporous nanocarbon supported Co(II)1-xCo(0)x/3Mn(III)2x/3S nanoparticles exhibit a superior OER performance compared to that of IrO2 catalyst and comparable Zn-air battery performance to that of the Pt-based battery. The rechargeable Zn-air battery shows high discharge peak power density (over 250 mW cm(-2)) and current density (180 mA cm(-2) at 1 V), specific capacity (∼550 mAh g(-1)), small charge-discharge voltage gap of ∼0.72 V at 20 mA cm(-2) and even higher stability than the Pt-based battery. The advanced performance of the bifunctional catalysts highlights the beneficial role of the simultaneous formation of Mn(III) and Co(0) as well as the dispersed hybridization with the codoped nanocarbon support.

  14. Chemical oxidative polymerization of aminodiphenylamines.

    Science.gov (United States)

    Cirić-Marjanović, Gordana; Trchová, Miroslava; Konyushenko, Elena N; Holler, Petr; Stejskal, Jaroslav

    2008-06-12

    The course of oxidation of 4-aminodiphenylamine with ammonium peroxydisulfate in an acidic aqueous ethanol solution as well as the properties of the oxidation products were compared with those of 2-aminodiphenylamine. Semiconducting oligomers of 4-aminodiphenylamine and nonconducting oligomers of 2-aminodiphenylamine of weight-average molecular weights 3700 and 1900, respectively, were prepared by using an oxidant to monomer molar ratio of 1.25. When this ratio was changed from 0.5 to 2.5, the highest conductivity of oxidation products of 4-aminodiphenylamine, 2.5 x 10 (-4) S cm (-1), was reached at the molar ratio [oxidant]/[monomer] = 1.5. The mechanism of the oxidative polymerization of aminodiphenylamines has been theoretically studied by the AM1 and MNDO-PM3 semiempirical quantum chemical methods combined with the MM2 molecular mechanics force-field method and conductor-like screening model of solvation. Molecular orbital calculations revealed the prevalence of N prim-C10 coupling reaction of 4-aminodiphenylamine, while N prim-C5 is the main coupling mode between 2-aminodiphenylamine units. FTIR and Raman spectroscopic studies confirm the prevalent formation of linear N prim-C10 coupled oligomers of 4-aminodiphenylamine and suggest branching and formation of phenazine structural units in the oligomers of 2-aminodiphenylamine. The results are discussed with respect to the oxidation of aniline with ammonium peroxydisulfate, leading to polyaniline, in which 4-aminodiphenylamine is the major dimer and 2-aminodiphenylamine is the most important dimeric intermediate byproduct.

  15. Polymeric lithography editor: Editing lithographic errors with nanoporous polymeric probes

    Science.gov (United States)

    Rajasekaran, Pradeep Ramiah; Zhou, Chuanhong; Dasari, Mallika; Voss, Kay-Obbe; Trautmann, Christina; Kohli, Punit

    2017-01-01

    A new lithographic editing system with an ability to erase and rectify errors in microscale with real-time optical feedback is demonstrated. The erasing probe is a conically shaped hydrogel (tip size, ca. 500 nm) template-synthesized from track-etched conical glass wafers. The “nanosponge” hydrogel probe “erases” patterns by hydrating and absorbing molecules into a porous hydrogel matrix via diffusion analogous to a wet sponge. The presence of an interfacial liquid water layer between the hydrogel tip and the substrate during erasing enables frictionless, uninterrupted translation of the eraser on the substrate. The erasing capacity of the hydrogel is extremely high because of the large free volume of the hydrogel matrix. The fast frictionless translocation and interfacial hydration resulted in an extremely high erasing rate (~785 μm2/s), which is two to three orders of magnitude higher in comparison with the atomic force microscopy–based erasing (~0.1 μm2/s) experiments. The high precision and accuracy of the polymeric lithography editor (PLE) system stemmed from coupling piezoelectric actuators to an inverted optical microscope. Subsequently after erasing the patterns using agarose erasers, a polydimethylsiloxane probe fabricated from the same conical track-etched template was used to precisely redeposit molecules of interest at the erased spots. PLE also provides a continuous optical feedback throughout the entire molecular editing process—writing, erasing, and rewriting. To demonstrate its potential in device fabrication, we used PLE to electrochemically erase metallic copper thin film, forming an interdigitated array of microelectrodes for the fabrication of a functional microphotodetector device. High-throughput dot and line erasing, writing with the conical “wet nanosponge,” and continuous optical feedback make PLE complementary to the existing catalog of nanolithographic/microlithographic and three-dimensional printing techniques. This new

  16. Visible and near-infrared intense luminescence from water-soluble lanthanide [Tb(III), Eu(III), Sm(III), Dy(III), Pr(III), Ho(III), Yb(III), Nd(III), Er(III)] complexes.

    Science.gov (United States)

    Quici, Silvio; Cavazzini, Marco; Marzanni, Giovanni; Accorsi, Gianluca; Armaroli, Nicola; Ventura, Barbara; Barigelletti, Francesco

    2005-02-07

    The synthesis of a new ligand (1) containing a single phenanthroline (phen) chromophore and a flexibly connected diethylenetriamine tetracarboxylic acid unit (DTTA) as a lanthanide (Ln) coordination site is reported [1 is 4-[(9-methyl-1,10-phenantrol-2-yl)methyl]-1,4,7-triazaheptane-1,1,7,7-tetraacetic acid]. From 1, an extended series of water-soluble Ln.1 complexes was obtained, where Ln is Eu(III), Tb(III), Gd(III), Sm(III), Dy(III), Pr(III), Ho(III), Yb(III), Nd(III), and Er(III). The stoichiometry for the association was found 1:1, with an association constant K(A) > or = 10(7) s(-1) as determined by employing luminescence spectroscopy. The luminescence and photophysical properties of the series of lanthanide complexes were investigated in both H2O and D2O solutions. High efficiencies for the sensitized emission, phi(se), in air-equilibrated water were observed for the Ln.1 complexes of Eu(III) and Tb(III) in the visible region (phi(se) = 0.24 and 0.15, respectively) and of Sm(III), Dy(III), Pr(III), Ho(III), Yb(III), Nd(III), and Er(III) in the vis and/or near-infrared region [phi(se) = 2.5 x 10(-3), 5 x 10(-4), 3 x 10(-5), 2 x 10(-5), 2 x 10(-4), 4 x 10(-5), and (in D2O) 4 x 10(-5), respectively]. For Eu.1 and Tb.1, luminescence data for water and deuterated water allowed us to estimate that no solvent molecules (q) are bound to the ion centers (q = 0). Luminescence quenching by oxygen was investigated in selected cases.

  17. Color stability of indirect composite materials polymerized with different polymerization systems.

    Science.gov (United States)

    Nakazawa, Motoko

    2009-06-01

    The purpose of the current study was to evaluate the color stability of two indirect composite materials (Sinfony and Pearleste) polymerized with different laboratory polymerization systems. Disk specimens were prepared with their proprietary polymerization systems (Visio and Pearlcure systems) or with a metal halide light polymerization unit (Hyper LII) for 60, 120, and 180 s. After storage at 37 degrees C for 24 h, the specimens were immersed in either purified water or tea. Color change between baseline evaluation and after 4 weeks was determined with a dental chroma meter (ShadeEye NCC) using black and white backgrounds. CIE 1976 L(*)a(*)b(*) values were determined, and they were converted into DeltaE(*)(ab) values. The DeltaE(*)(ab) value of the Sinfony material immersed in tea was the highest when the material was polymerized with the proprietary Visio system. The Pearleste material immersed in purified water and tea was not affected substantially by the polymerization systems. Among the 12 groups polymerized with the Hyper LII units, DeltaE(*)(ab) values of 11 groups were significantly lower for the Pearleste material than for the Sinfony material. It can be concluded that the Pearleste material was stable against color change when the material was polymerized with either the Pearlcure system or with the Hyper LII unit.

  18. Survey and research on precision polymerization polymeric materials; Seimitsu jugo kobunshi zairyo ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Survey and research on the precision control of primary structure of polymeric materials and the precision evaluation technology have been conducted to develop advanced polymeric materials. It is proposed that the three basic processes of polymer synthesis, i.e., addition, condensation, and biomimesis, in forming the precision polymerization skeleton are to be covered through a centralized joint research effort with participation of industry, academia, and the government institute and under the leadership of researchers from academic institutions as the team leaders. For the study of technology trends, international conferences held in UK, Germany, and Hawaii are introduced, and domestic meetings, i.e., Annual Polymer Congress and Polymer Conference, are summarized. In addition, Precision Polymerization Forum and International Workshop on Precision Polymerization were held. The basic studies include a quantum-chemical elucidation of the elementary process in polymerization reaction, time-resolved analysis of polymerization process and polymer properties, synthesis of polymers with controlled microstructures by coordination polymerization using metal complexes, synthesis of polymer with controlled microstructures by precision polycondensation, molecular recognition in catalyst-reaction site, and synthesis of imprinting polymers. 246 refs., 117 figs., 14 tabs.

  19. AND Dy(III)

    African Journals Online (AJOL)

    userpc

    SYNTHESIS, SPECTROSCOPIC CHARACTERIZATION AND BIOLOGICAL. ACTIVITIES OF Sm(III) AND Dy(III) COMPLEXES WITH SCHIFF BASE DERIVED FROM. 2-HYDROXY-1-NAPHTHALDEHYDE AND 2-AMINOBENZOIC ACID. 1Bashir, S.S. and Abdulhadi, A. 1Department of Chemistry, Rabi'u Musa Kwankwaso ...

  20. Impact of volcanism on the evolution of Lake Van (eastern Anatolia) III: Periodic (Nemrut) vs. episodic (Süphan) explosive eruptions and climate forcing reflected in a tephra gap between ca. 14 ka and ca. 30 ka

    Science.gov (United States)

    Schmincke, Hans-Ulrich; Sumita, Mari

    2014-09-01

    Fifteen Lateglacial to Holocene rhyolitic, dominantly primary tephra layers piston-cored and drilled (ICDP Paleovan drilling project) in western Lake Van (eastern Anatolia, Turkey) were precisely correlated to either of the two adjacent and active large volcanoes Nemrut and Süphan based on shard textures, mineralogy and mineral and glass compositions. The young peralkaline (comenditic to pantelleritic) primary rhyolitic Nemrut tephras are characterized by anorthoclase, hedenbergitic to augitic clinopyroxene, fayalitic olivine, minor quartz, and rare accessory chevkinite and zircon. Phenocrysts in subalkaline primary rhyolitic Süphan tephras are chiefly oligoclase-labradorite, with minor K-rich sanidine in some, biotite, amphibole, hypersthene, rare augitic clinopyroxene, relatively common allanite and rare zircon. Two contrasting explosive eruptive modes are distinguished from each other: episodic (Süphan) and periodic (Nemrut). The Lateglacial Süphan tephra swarm covers a short time interval of ca. 338 years between ca. 13,078 vy BP and 12,740 vy BP, eruptions having occurred statistically every ca. 42 years with especially short intervals between V-11 (reworked) and V-14. Causes for the strongly episodic Süphan explosive behavior might include seismic triggering of a volcano-magma system unable to erupt explosively without the benefit of external triggering, as reflected in pervasive faulting preceding the Süphan tephra swarm. Seismic triggering may have caused the rise of more mafic ("trachyandesitic") parent magma, heating near-surface pockets of highly evolved magma - that might have formed silicic domes during this stage of volcano evolution - resulting in ascent and finally explosive fragmentation of magma essentially by external factors, probably significantly enhanced by magma-water/ice interaction. Explosive eruptions of the Nemrut volcano system, interpreted to be underlain by a large fractionating magma reservoir, follow a more periodic mode of (a

  1. Organometallic mediated radical polymerization of vinyl acetate using bis(imino)pyridine vanadium trichloride complexes.

    Science.gov (United States)

    Perry, Mitchell R; Allan, Laura E N; Decken, Andreas; Shaver, Michael P

    2013-07-07

    The synthesis and characterization of one novel proligand and six novel vanadium(III) trichloride complexes is described. The controlled radical polymerization activity towards vinyl acetate of these, and eight other bis(imino)pyridine vanadium trichloride complexes previously reported, is investigated. Those complexes possessing variation at the N-aryl para-position with no steric protection offered by ortho-substituents (4 examples) result in poor control over poly(vinyl acetate) polymerization. Control is improved with increasing steric bulk at the ortho-position of the N-aryl substituent (4 examples) although attempts to increase steric bulk past isopropyl were unsuccessful. Synthesizing bis(imino)pyridine vanadium trichloride complexes with substituted imine backbones restores polymerization control when aliphatic substituents are used (4 examples) but ceases to make any drastic improvements on catalyst lifetime. Modification of the polymerization conditions is also investigated, in an attempt to improve the catalyst lifetime. Expansion of the monomer scope to include other vinyl esters, particularly those derived from renewable resources, shows promising results.

  2. Polymerization Within Confined Nanochannels of Porous Metal-Organic Frameworks

    Science.gov (United States)

    Hu, Zhigang; Zhao, Dan

    2013-06-01

    Metal-organic frameworks (MOFs) have been increasingly investigated as templates for precise control of polymerization. Polymerizations within confined nanochannels of porous MOFs have shown unique confinement and alignment effect on polymer chain structures and thus are promising ways to achieve well-defined polymers. Herein, this review will focus on illustrating the recent progress of polymerization within confined nanochannels of MOFs, including radical polymerization, coordination polymerization, ring-opening polymerization, catalytic polymerization, etc. It will demonstrate how the heterogeneous MOF structures (pore size, pore shapes, flexible structures, and versatile functional groups) affect the polymeric products' molecular weight, molecular weight distribution, tacticity, reaction sites, copolymer sequence, etc. Meanwhile, we will highlight some challenges and foreseeable prospects on these novel polymerization methods.

  3. Extraction Separation of Am(III) and Eu(III) with Thermo-sensitive Gel introducing TPEN Derivatives

    Energy Technology Data Exchange (ETDEWEB)

    Kenji Takeshita [Chemical Resources Laboratory, Tokyo Institute of Technology Nagatsuta, Midori-ku, Yokohama 226-8503 (Japan); Yoshio Nakano [Department of Environment Chemistry and Engineering, Tokyo Institute of Technology Nagatsuta, Midori-ku, Yokohama 226-8502 (Japan); Tatsuro Matsumura [Nuclear Science and Engineering Directorate, Japan Atomic Energy Agency Tokai-mura, Naka-gun, Ibaragi, 319-1195 (Japan); Atsunori Mori [Department of Chemical Science and Engineering, Kobe University Rokkodai-cho, Nada-ku, Kobe, 657-8501 (Japan)

    2008-07-01

    A thermal-swing chromatographic process using a thermo-sensitive gel co-polymerized with NIPA (N-isopropyl-acrylamide) and TPPEN (N,N,N',N'-tetrakis(4-propenyl-oxy-2-pyridyl-methyl)ethylenediamine) was studied for the separation of Am(III) from Eu(III). First, the radiolysis of the TPPEN-NIPA gel was tested by the {gamma}-ray irradiation and the {alpha} nuclide adsorption. The extraction separation of Am(III) was not influenced in the radioactive environment of the proposed process. Next, the TPPEN-NIPA gel was immobilized in porous silica particles and the applicability of the gel-immobilized silica to the proposed process was tested. Am(III) was extracted selectively in the gel-immobilized silica at 5 deg. C and the separation factor of Am(III) over Eu(III) was evaluated to be 3.7. The distribution ratio of Am(III) was reduced to less than 1/20 by increasing temperature from 5 deg. C to 40 deg. C. These results indicate that the TPPEN-NIPA gel is applicable to the thermal-swing chromatographic process for the minor actinide recovery. (authors)

  4. Fire-Retardant Polymeric Additives

    Science.gov (United States)

    Williams, Martha K.; Smith, Trent M.

    2011-01-01

    component forms polybenzoxazole (PBO) in a reaction that absorbs heat from its surroundings. PBO under thermal stress cross-links, forming a protective char layer, which thermally insulates the polymer. Thus, the formation of the char layer further assists to extinguish the fire by preventing vaporization of the polymeric fuel.

  5. Mixing in polymeric microfluidic devices.

    Energy Technology Data Exchange (ETDEWEB)

    Schunk, Peter Randall; Sun, Amy Cha-Tien; Davis, Robert H. (University of Colorado at Boulder, Boulder, CO); Brotherton, Christopher M. (University of Colorado at Boulder, Boulder, CO)

    2006-04-01

    This SAND report describes progress made during a Sandia National Laboratories sponsored graduate fellowship. The fellowship was funded through an LDRD proposal. The goal of this project is development and characterization of mixing strategies for polymeric microfluidic devices. The mixing strategies under investigation include electroosmotic flow focusing, hydrodynamic focusing, physical constrictions and porous polymer monoliths. For electroosmotic flow focusing, simulations were performed to determine the effect of electroosmotic flow in a microchannel with heterogeneous surface potential. The heterogeneous surface potential caused recirculations to form within the microchannel. These recirculations could then be used to restrict two mixing streams and reduce the characteristic diffusion length. Maximum mixing occurred when the ratio of the mixing region surface potential to the average channel surface potential was made large in magnitude and negative in sign, and when the ratio of the characteristic convection time to the characteristic diffusion time was minimized. Based on these results, experiments were performed to evaluate the manipulation of surface potential using living-radical photopolymerization. The material chosen to manipulate typically exhibits a negative surface potential. Using living-radical surface grafting, a positive surface potential was produced using 2-(Dimethylamino)ethyl methacrylate and a neutral surface was produced using a poly(ethylene glycol) surface graft. Simulations investigating hydrodynamic focusing were also performed. For this technique, mixing is enhanced by using a tertiary fluid stream to constrict the two mixing streams and reduce the characteristic diffusion length. Maximum mixing occurred when the ratio of the tertiary flow stream flow-rate to the mixing streams flow-rate was maximized. Also, like the electroosmotic focusing mixer, mixing was also maximized when the ratio of the characteristic convection time to the

  6. Catalytic Polymerization of Acrylonitrile by Khulays Bentonite

    Directory of Open Access Journals (Sweden)

    Matar M. Al-Esaimi

    2007-04-01

    Full Text Available The aqueous polymerization of acrylonitrile (AN catalyzed with exchanged Khulays bentonite . The influence of various polymerization parameters ( e.g., concentrations of Potassium Persulfate (K2S2O8 and monomer , various of organic solvents, and different temperature has been investigated. It was found that the rate of polymerization of AN was found to be dependent on monomer concentration, initiator and temperature. The activation energy of polymerization was calculated .Thermal properties of the polymer were studied by TGA and DSC techniques. © 2007 CREC UNDIP. All rights reserved.Received: 5 February 2007; Received in revised: 19 April 2007; Accepted: 7 May 2007[How to Cite: M. M. Al-Esaimi. (2007. Catalytic Polymerization of Acrylonitrile by Khulays Bentonite. Bulletin of Chemical Reaction Engineering and Catalysis, 2 (2-3: 32-36.  doi:10.9767/bcrec.2.1.4.6-10][How to Link/DOI: http://dx.doi.org/10.9767/bcrec.2.1.4.6-10 || or local: http://ejournal.undip.ac.id/index.php/bcrec/article/view/4] 

  7. Functionally polymerized surfactant vesicles: synthesis and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Tundo, P.; Kippenberger, D.J.; Klahn, P.L.; Prieto, N.E.; Fendler, J.H.

    1982-01-27

    Bis(2-(10-undecenoyloxycarbony bromide, bis(2-(10-undecenoyloxycarbony (2-hydroxyethyl)methylammonium bromide, bis(2-(10-undecenoyloxycarbony acid, bis(2-(10-undecenoyloxycarbony allylbis(2-dodecanoyloxycarbon bromide, and dimethyl-n-hexadecyl (10-(p-vin decyl)ammonium bromide have been synthesized. The predominantly single compartment bilayer vesicles formed from these surfactants could be polymerized either by exposure to ultraviolet irradiation or by the use of azoisobutyronitrile as an initiator. The presence of vesicles (unpolymerized and polymeric) has been demonstrated by electron micrography, H/sup 1/ NMR, gel filtration, phase transition, turbidity changes, substrate entrapment, and permeability. Polymerized vesicles are considerably more stable and less permeable and have reduced rates of turbidity changes compared to their unpolymerized counterparts. 19 references.

  8. Universal metastability of sickle hemoglobin polymerization

    Science.gov (United States)

    Weng, Weijun

    Sickle hemoglobin (HbS) is a natural mutation of the normal hemoglobin (HbA) found in the red blood cells of human body. Polymerization of HbS occurs when the concentration of deoxyHbS exceeds a well-defined solubility, which is the underlying cause of the Sickle Cell Disease. It has long been assumed that thermodynamic equilibrium is reached when polymerization comes to an end. However, in this thesis we demonstrate that in confined volume as well as in bulk solution, HbS polymerization terminates prematurely, leaving the solution in a metastable state. A newly developed Reservoir method as well as modulated excitation method were adopted for the study. This discovery of universal metastability gives us new insights into understanding the mechanism of sickle cell disease.

  9. Surface properties of an indirect composite polymerized with five laboratory light polymerization systems.

    Science.gov (United States)

    Murakami, Mahoko

    2009-06-01

    A study was conducted to evaluate the influence of laboratory light polymerization systems on the post-curing properties of a composite. An indirect composite (Sinfony) was polymerized with five polymerization systems (Visio system, Hyper LII, Pearlcure Light, Twinkle MIII, and UniXS II) using nine polymerization modes. After light exposure, Knoop hardness number, wear depth, and changes in gloss were determined. The highest hardness number was recorded with the use of the Hyper LII (120 s) and Pearlcure Light (120 s) units, whereas the lowest value was obtained with the Visio system and UniXS II (60 s). Six groups demonstrated comparable as well as higher wear resistance to toothbrush abrasion (Hyper LII 60 and 120 s, UniXS II 120 s, Pearlcure Light 60 and 120 s, and Twinkle MIII 120 s), and two groups exhibited lower wear resistance (Visio system and UniXS II 60 s). Gloss of the composite was not dependent on the polymerization mode used before wear testing. However, surface gloss was significantly reduced by toothbrush dentifrice abrasion. Within the limitations of the present experiment, it can be concluded that the Sinfony composite can be polymerized sufficiently with high-intensity light polymerization units.

  10. Precision synthesis of functional materials via RAFT polymerization and click-type chemical reactions

    Science.gov (United States)

    Flores, Joel Diez

    2011-12-01

    achieved via reaction with model amine, thiol and alcohol compounds yielding urea, thiourethane and urethane derivatives, respectively. Reactions with amines and thiols (in the presence of base) were rapid, quantitative and efficient. However, the reaction with alcohols catalyzed by dibutyltin dilaurate (DBTDL) was relatively slow but proceeded to completion. Selective reaction pathways for the addition of difunctional ethanolamine and mercaptoethanol were also investigated. A related strategy is described in Section II wherein a hydroxyl-containing diblock copolymer precursor was transformed into a library of functional copolymers via two sequential post-polymerization modification reactions. A diblock copolymer scaffold, poly[(N,N-dimethylacrylamide)-b-( N-(2-hydroxyethyl)acrylamide] (PDMA-b-PHEA) was first prepared. The hydroxyl groups of the HEA block were then reacted with 2-(acryloyloxy)ethylisocyanate (AOI) and allylisocyanate (AI) resulting in acrylate- and allyl-functionalized copolymer precursors, respectively. The efficiencies of Michael-type and free radical thiol addition reactions were investigated using selected thiols having alkyl, aryl, hydroxyl, carboxylic acid, amine and amino acid functionalities. The steps of RAFT polymerization, isocyanate-hydroxyl coupling and thiol-ene addition are accomplished under mild conditions, thus offering facile and modular routes to synthesize functional copolymers. The synthesis and solution studies of pH- and salt-responsive triblock copolymer are described in Section III. This system is capable of forming self-locked micellar structures which may be controlled by changing solution pH as well as ionic strength. A triblock copolymer containing a permanently hydrophilic poly(N,N-dimethylacrylamide) (PDMA) outer block, a salt-sensitive zwitterionic poly(3[2-(N-methylacrylamido)ethyl dimethylammonio]propanesulfonate) (PMAEDAPS) middle block and a pH-responsive 3-acrylamido-3-methylbutanoic acid (PAMBA) core block was

  11. Polymerization of Building Blocks of Life on Europa and Other Icy Moons.

    Science.gov (United States)

    Kimura, Jun; Kitadai, Norio

    2015-06-01

    The outer Solar System may provide a potential habitat for extraterrestrial life. Remote sensing data from the Galileo spacecraft suggest that the jovian icy moons--Europa, Ganymede, and possibly Callisto--may harbor liquid water oceans underneath their icy crusts. Although compositional information required for the discussion of habitability is limited because of significantly restricted observation data, organic molecules are ubiquitous in the Universe. Recently, in situ spacecraft measurements and experiments suggest that amino acids can be formed abiotically on interstellar ices and comets. These amino acids could be continuously delivered by meteorite or comet impacts to icy moons. Here, we show that polymerization of organic monomers, in particular amino acids and nucleotides, could proceed spontaneously in the cold environment of icy moons, in particular the jovian icy moon Europa as a typical example, based on thermodynamic calculations, though kinetics of formation are not addressed. Observed surface temperature on Europa is 120 and 80 K in the equatorial region and polar region, respectively. At such low temperatures, Gibbs energies of polymerization become negative, and the estimated thermal structure of the icy crust should contain a shallow region (i.e., at a depth of only a few kilometers) favorable for polymerization. Investigation of the possibility of organic monomer polymerization on icy moons could provide good constraints on the origin and early evolution of extraterrestrial life.

  12. Mechanism and kinetics of addition polymerizations

    CERN Document Server

    Kucera, M

    1991-01-01

    This volume presents an up-to-date survey of knowledge concerning addition type polymerizations. It contains nine chapters, each of which covers a particular basic term. Whenever necessary, the phenomena are discussed from the viewpoint of both stationary and non-stationary state of radical, ionic (i.e. anionic and cationic) and coordination polymerization. Special attention has been paid to the propagation process. It provides not only a general overview but also information on important special cases (theoretical conditions of propagation, influence of external factors, controlled propagatio

  13. Polymeric Quaternary Ammonium Compounds: Versatile Antimicrobial Materials.

    Science.gov (United States)

    Zubris, Deanna L; Minbiole, Kevin P C; Wuest, William M

    2017-01-01

    Polymeric Quaternary Ammonium Compounds (polyQACs) comprise a broad class of materials with applications in medical implants, food processing, and surface sanitizing, amongst many others. These polymeric substances are especially promising due to their potent antibacterial activity and limited hemolytic toxicity. In particular, many polyQACs have superior therapeutic indices and a lower likelihood of developing antibacterial resistance in comparison to their monomers, making them ideal materials for wound dressings, catheters, and other biomedical applications. This review outlines the history and development, previous successes, current state of the research, and future directions of polyQACs in society.

  14. Inflation and Instability of a Polymeric Membrane

    DEFF Research Database (Denmark)

    Neergaard, Jesper; Hassager, Ole

    1999-01-01

    We consider an axisymmetric polymeric membrane inflated by a uniform pressure difference acting across the membrane. The polymeric materialis described by an arbitrary combination of a viscoelastic and a purely viscous component to the stress. Some viscoelastic materials described by a Mooney......-Rivlin model show a monotone increasingpressure during inflation of a spherical membrane. These materials develop a homogeneous membrane thickness in agreement with the Considere-Pearson condition. Molecularly based models such as the neo-Hookean, Doi-Edwards or Tom-Pom model show a pressure maximum when...... inflated. Membranesdescribed by these models develop a local thinning of the membrane which may lead to bursting in finite time....

  15. NNDSS - Table III. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table III. Tuberculosis - 2017.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  16. Pseudo Class III malocclusion

    National Research Council Canada - National Science Library

    Al-Hummayani, Fadia M

    2016-01-01

    .... This case report represents a none traditional treatment modality to treat deep anterior crossbite in an adult pseudo class III malocclusion complicated by severely retruded, supraerupted upper and lower incisors...

  17. Single‐molecule mechanochemical characterization of E. coli pol III core catalytic activity

    Science.gov (United States)

    Naufer, M. Nabuan; Murison, David A.; Rouzina, Ioulia; Beuning, Penny J.

    2017-01-01

    Abstract Pol III core is the three‐subunit subassembly of the E. coli replicative DNA polymerase III holoenzyme. It contains the catalytic polymerase subunit α, the 3′ → 5′ proofreading exonuclease ε, and a subunit of unknown function, θ. We employ optical tweezers to characterize pol III core activity on a single DNA substrate. We observe polymerization at applied template forces F  30 pN. Both polymerization and exonucleolysis occur as a series of short bursts separated by pauses. For polymerization, the initiation rate after pausing is independent of force. In contrast, the exonucleolysis initiation rate depends strongly on force. The measured force and concentration dependence of exonucleolysis initiation fits well to a two‐step reaction scheme in which pol III core binds bimolecularly to the primer‐template junction, then converts at rate k 2 into an exo‐competent conformation. Fits to the force dependence of k init show that exo initiation requires fluctuational opening of two base pairs, in agreement with temperature‐ and mismatch‐dependent bulk biochemical assays. Taken together, our results support a model in which the pol and exo activities of pol III core are effectively independent, and in which recognition of the 3′ end of the primer by either α or ε is governed by the primer stability. Thus, binding to an unstable primer is the primary mechanism for mismatch recognition during proofreading, rather than an alternative model of duplex defect recognition. PMID:28263430

  18. Polymerization Initiated at the Sidewalls of Carbon Nanotubes

    Science.gov (United States)

    Tour, James M.; Hudson, Jared L.

    2011-01-01

    A process has been developed for growing polymer chains via anionic, cationic, or radical polymerization from the side walls of functionalized carbon nanotubes, which will facilitate greater dispersion in polymer matrices, and will greatly enhance reinforcement ability in polymeric material.

  19. Interfacial Polymerization of Polyaniline Nanofibers Grafted to Au Surfaces

    National Research Council Canada - National Science Library

    Sawall, D

    2004-01-01

    .... The in-situ polymerization technique of these PANI nanofibers in the presence of sulfonated polystyrene allowed for the growth of PANI 2-D nanostructures embedded in the polymerized sulfonated host...

  20. Immobilization of biocatalysts for enzymatic polymerizations : Possibilities, advantages, applications

    NARCIS (Netherlands)

    Miletic, Nemanja; Nastasovic, Aleksandra; Loos, Katja; Miletić, Nemanja; Nastasović, Aleksandra

    Biotechnology also holds tremendous opportunities for realizing functional polymeric materials. Biocatalytic pathways to polymeric materials are an emerging research area with not only enormous scientific and technological promise, but also a tremendous impact on environmental issues. Many of the

  1. Evidence for an RNA polymerization activity in axolotl and Xenopus egg extracts.

    Directory of Open Access Journals (Sweden)

    Hélène Pelczar

    2010-12-01

    Full Text Available We have previously reported a post-transcriptional RNA amplification observed in vivo following injection of in vitro synthesized transcripts into axolotl oocytes, unfertilized (UFE or fertilized eggs. To further characterize this phenomenon, low speed extracts (LSE from axolotl and Xenopus UFE were prepared and tested in an RNA polymerization assay. The major conclusions are: i the amphibian extracts catalyze the incorporation of radioactive ribonucleotide in RNase but not DNase sensitive products showing that these products correspond to RNA; ii the phenomenon is resistant to α-amanitin, an inhibitor of RNA polymerases II and III and to cordycepin (3'dAMP, but sensitive to cordycepin 5'-triphosphate, an RNA elongation inhibitor, which supports the existence of an RNA polymerase activity different from polymerases II and III; the detection of radiolabelled RNA comigrating at the same length as the exogenous transcript added to the extracts allowed us to show that iii the RNA polymerization is not a 3' end labelling and that iv the radiolabelled RNA is single rather than double stranded. In vitro cell-free systems derived from amphibian UFE therefore validate our previous in vivo results hypothesizing the existence of an evolutionary conserved enzymatic activity with the properties of an RNA dependent RNA polymerase (RdRp.

  2. Design Strategies for Fluorescent Biodegradable Polymeric Biomaterials

    OpenAIRE

    Zhang, Yi; Yang, Jian

    2012-01-01

    The marriage of biodegradable polymer and fluorescent imaging has resulted in an important area of polymeric biomaterials: biodegradable fluorescent polymers. Researchers have put significant efforts on developing versatile fluorescent biomaterials due to their promising in biological/biomedical labeling, tracking, monitoring, imaging, and diagnostic applications, especially in drug delivery, tissue engineering, and cancer imaging applications. Biodegradable fluorescent polymers can function ...

  3. Olefin polymerization over supported chromium oxide catalysts

    NARCIS (Netherlands)

    Weckhuysen, B.M.; Schoonheydt, R.A.

    1999-01-01

    Cr/SiO2 or Phillips-type catalysts are nowadays responsible for a large fraction of all polyethylene (HDPE and LLDPE) worldwide produced. In this review, several key-properties of Cr/SiO2 catalysts will be discussed in relation to their polymerization characteristics. It will be shown how the

  4. (Jacq) Benth (Mimosaceae) root: Hemoglobin polymerization ...

    African Journals Online (AJOL)

    Results: All the solvent-partitioned fractions of C. portoricensis showed a high percentage inhibition of hemoglobin polymerization at 5 mg/mL with the ethyl acetate fraction showing the highest percentage inhibition of 98.97 ± 1.62 % The pooled chromatographic fraction C3 containing two compounds (Rf value: 0.71, 0.83); ...

  5. Thin polymeric films for building biohybrid microrobots.

    Science.gov (United States)

    Ricotti, Leonardo; Fujie, Toshinori

    2017-03-06

    This paper aims to describe the disruptive potential that polymeric thin films have in the field of biohybrid devices and to review the recent efforts in this area. Thin (thickness  3D systems, new advanced materials to be used for the fabrication of thin films, cell engineering opportunities and modelling/computational efforts.

  6. Polymerization shrinkage strain of interocclusal recording materials.

    Science.gov (United States)

    Chun, Jung-hyun; Pae, Ahran; Kim, Sung-hun

    2009-01-01

    The aim of this in vitro study was to investigate the polymerization shrinkage behavior and to measure the polymerization shrinkage-strain of interocclusal recording materials. The materials investigated in this study were five polyvinylsiloxane (Imprint Bite, Silagum Automix Bite, O-Bite, Blu-Mousse Classic and Exabite II), one polyether (Ramitec) and one dimethacrylatebased (Luxabite) materials. The polymerization shrinkage values of ten specimens for each material were measured by the Bonded-disk method at 1, 3, 5, 7 and 10 min after mixing at 37 degrees C. The amount of shrinkage-strain (%) was derived and all data were statistically analyzed by one-way ANOVA and the multiple comparison Scheffé test (alpha=0.05). The representative shrinkage-strain kinetic graphs showed that all specimens shrank immediately, except Luxabite which expanded for the initial few seconds. After that, the shrinkage-strain values increased in the magnitude up to 10 min, but its rate decreased gradually with time. The shrinkage-strain values (0.18+/-0.03-0.16+/-0.03%) of O-Bite at 5, 7 and 10 min were significantly lower than the other materials, but Luxabite exhibited the highest values (3.10+/-0.17-3.30+/-0.16%). The interocclusal recording materials investigated presented significantly different polymerization shrinkage-strain kinetics and showed dimensional changes even after the setting time indicated by respective manufacturers.

  7. Interaction of acetamiprid with extracellular polymeric substances ...

    African Journals Online (AJOL)

    Extracellular polymeric substances (EPS) are important components of activated sludge and it plays an important role in removing pollutants. The interaction between EPS and organic pollutants is still little known. In the present study, the interaction of soluble/bound EPS with acetamiprid, a neonicotinoid insecticide, was ...

  8. Polymeric implant of methylprednisolone for spinal injury ...

    African Journals Online (AJOL)

    Purpose: To improve the effectiveness and reduce the systemic side effects of methylprednisolone in traumatic spinal injuries, its polymeric implants were prepared using chitosan and sodium alginate as the biocompatible polymers. Methods: Implants of methylprednisolone sodium succinate (MPSS) were prepared by ...

  9. The Morphology of Emulsion Polymerized Latex Particles

    Science.gov (United States)

    Wignall, G. D.; Ramakrishnan, V. R.; Linne, M. A.; Klein, A.; Sperling, L. H.; Wai, M. P.; Gelman, R. A.; Fatica, M. G.; Hoerl, R. H.; Fisher, L. W.

    1987-11-01

    Under monomer starved feed conditions, emulsion polymerization of perdeuterated methyl methacrylate and styrene in the presence of preformed polymethylmethacrylate latexes resulted in particles with a core-shell morphology, as determined by small-angle neutron scattering (SANS) analysis for a hollow sphere. The locus of polymerization of the added deuterated monomer is therefore at the particle surface. In similar measurements a statistical copolymer of styrene and methyl methacrylate was used as seed particles for further polymerization of trideuteromethyl methacrylate. The resulting polymer latex was again shown to have a core-shell morphological structure as determined by SANS. SANS experiments were also undertaken on polystyrene latexes polymerized by equilibrium swelling methods, with deuterated polymer forming the first or second step. The experiments covered a molecular weight range of 6 x 10{sup 4} 10{sup 6} the molecular weights are consistent with the experimental errors, indicating that the deuterium labeled molecules are randomly distributed in the latex. These results led to the finding that the polymer chains were constrained in the latex particles by factors of 2 to 4 from the relaxed coil dimensions. For M < 10{sup 6} g/mol SANS gave zero angle scattering intensities much higher than expected on the basis of a random distribution of labeled molecules. Several models were examined, including the possible development of core-shell structures at lower molecular weights.

  10. Vibrating polymeric microsieves: Antifouling strategies for microfiltration

    NARCIS (Netherlands)

    Girones nogue, Miriam; Akbarsyah, Imam J.; Bolhuis-Versteeg, Lydia A.M.; Lammertink, Rob G.H.; Wessling, Matthias

    2006-01-01

    Constant flux performance in time is achieved with polyethersulfone (PES) polymeric microsieves when filtering protein solutions, skimmed milk and white beer in combination with backpulsing. Such microsieves are fabricated by phase separation micromolding (PSμM) and possess pores around 2 μm. The

  11. Polymeric Electrolytic Hygrometer For Harsh Environments

    Science.gov (United States)

    Lawson, Daniel D.; Shakkottai, Parthasarathy; Venkateshan, Shakkottai P.

    1989-01-01

    Design of polymeric electrolytic hygrometer improved to meet need for reliable measurements of relative humidity in harsh environments of pulpmills and papermills. Redesigned sensor head features shorter, more-rigidly-held sensing element, less vulnerable than previous version to swell and loss of electrical contact. Useful for control of batch dryers in food and pharmaceutical industries.

  12. Forming of Polymeric Tubular Micro-components

    DEFF Research Database (Denmark)

    Qin, Yi; Zhao, Jie; Anyasodor, Gerald

    2015-01-01

    This chapter is intended to provide an overview of three nontraditional shaping technologies for the forming of polymeric micro-tubes, which are hot embossing, blow molding, and cross rolling, as well as realization of a process chain and the integration of a modular machine-based manufacturing...

  13. Polymeric components for telecom and datacom

    NARCIS (Netherlands)

    Diemeer, Mart; Dekker, R.; Hilderink, L.T.H.; Leinse, Arne; Balakrishnan, M.; Faccini, M.; Driessen, A.; Lambeck, Paul; Gorecki, Christophe; Pustelny, Tadeusz

    2005-01-01

    Polymeric optical waveguide components offer attractive properties for applications in optical telecom and datacom systems. These are high speed for electro-optic modulators, low power dissipation for thermo-optic (digital) switches and low-cost for all active and passive components. We report on

  14. Proteins and Peptides in Biomimetic Polymeric Membranes

    DEFF Research Database (Denmark)

    Perez, Alfredo Gonzalez

    2013-01-01

    This chapter discusses recent advances and the main advantages of block copolymers for functional membrane protein reconstitution in biomimetic polymeric membranes. A rational approach to the reconstitution of membrane proteins in a functional form can be addressed by a more holistic view by using...

  15. The morphology of emulsion polymerized latex particles

    Energy Technology Data Exchange (ETDEWEB)

    Wignall, G.D.; Ramakrishnan, V.R.; Linne, M.A.; Klein, A.; Sperling, L.H.; Wai, M.P.; Gelman, R.A.; Fatica, M.G.; Hoerl, R.H.; Fisher, L.W.

    1987-11-01

    Under monomer starved feed conditions, emulsion polymerization of perdeuterated methyl methacrylate and styrene in the presence of preformed polymethylmethacrylate latexes resulted in particles with a core-shell morphology, as determined by small-angle neutron scattering (SANS) analysis for a hollow sphere. The locus of polymerization of the added deuterated monomer is therefore at the particle surface. In similar measurements a statistical copolymer of styrene and methyl methacrylate was used as seed particles for further polymerization of trideuteromethyl methacrylate. The resulting polymer latex was again shown to have a core-shell morphological structre as determined by SANS. SANS experiments were also undertaken on polystyrene latexes polymerized by equilibrium swelling methods, with deuterated polymer forming the first or second step. The experiments covered a molecular weight range of 6 x 10/sup 4/ < M < 6 x 10/sup 6/ g/mol. For M > 10/sup 6/ the molecular weights are consistent with the experimental errors, indicating that the deuterium labeled molecules are randomly distributed in the latex. These results led to the finding that the polymer chains were constrained in the latex particles by factors of 2 to 4 from the relaxed coil dimensions. For M < 10/sup 6/ g/mol SANS gave zero angle scattering intensities much higher than expected on the basis of a random distribution of labeled molecules. Several models were examined, including the possible development of core-shell structures at lower molecular weights. 25 refs., 6 figs., 3 tabs.

  16. Polymeric Cantilever Arrays for Biosensing Applications

    DEFF Research Database (Denmark)

    Calleja, M.; Tamayo, J.; Johansson, Alicia

    2003-01-01

    We report the fabrication of arrays of polymeric cantilevers for biochemistry applications. The cantilevers are fabricated in the polymer SU-8. The use of a polymer as the component material for the cantilevers provides the sensors with very high sensitivity due to convenient mechanical material...

  17. Nylon 6 polymerization in the solid state

    NARCIS (Netherlands)

    Gaymans, R.J.; Amirtharaj, John; Kamp, Henk

    1982-01-01

    The postcondensation of nylon 6 in the solid state was studied. The reactions were carried out on fine powder in a fluidized bed reactor in a stream of dry nitrogen in the temperature range 110-205°C and during 1-24 h. The solid-state polymerization (SSP) did not follow melt kinetics, but was found

  18. Polymerization of different lignins by laccase

    NARCIS (Netherlands)

    Mattinen, M.L.; Suortti, T.; Gosselink, R.J.A.; Argyropoulos, D.S.; Evtuguin, D.; Suurnäkki, A.; Jong, de E.; Tamminen, T.

    2008-01-01

    In this study the oxidative polymerization of different lignins, i.e. Flax Soda lignin, Spruce EMAL, and Eucalyptus Dioxane lignin by Trametes hirsuta laccase was compared. Initially the structures of the different lignins were compared by Fourier transform infrared spectroscopy. The reactivity of

  19. Polymerization of epoxidized triglycerides with fluorosulfonic acid

    Science.gov (United States)

    The use of triglycerides as agri-based renewable raw materials for the development of new products is highly desirable in view of uncertain future petroleum prices. A new method of polymerizing epoxidized soybean oil has been devised with the use of fluorosulfonic acid. Depending on the reaction con...

  20. Current trends in interfacial polymerization chemistry

    NARCIS (Netherlands)

    Raaijmakers, Michiel; Benes, Nieck Edwin

    2016-01-01

    Interfacial polymerization is an enabling technique for the large-scale production of ultrathin layers, hollow nanospheres and nanofibers. The availability of a wide range of suitable monomer reactants allows for the synthesis of an impressive collection of polymers, including polyamides,

  1. Evaluation of polymerization shrinkage, polymerization shrinkage stress, wear resistance, and compressive strength of a silorane-based composite: A finite element analysis study

    Directory of Open Access Journals (Sweden)

    Suresh Mitthra

    2017-01-01

    Full Text Available Background: Understanding the mechanical properties is important in predicting the clinical behavior of composites. Finite element analysis (FEA evaluates properties of materials replicating clinical scenario. Aim: This study evaluated polymerization shrinkage and stress, wear resistance (WR, and compressive strength (CS of silorane in comparison with two methacrylate resins. Settings and Design: This study design was a numerical study using FEA. Materials and Methods: Three-dimensional (3D models of maxillary premolar with Class I cavities (2 mm depth, 4 mm length, and 2.5 mm width created and restored with silorane, nanohybrid, and microhybrid; Groups I, II, and III, respectively. Loads of 200–600 N were applied. Polymerization shrinkage was first determined by displacement produced in the X, Y, and Z planes. Maximum stress distribution due to shrinkage was calculated using AN SYS software. 3D cube models of composite resins were simulated with varying filler particle size. Similar loads were applied. WR and compressive stress were calculated: K W L/H and load/cross-sectional area, respectively. Statistical analysis done using one-way ANOVA, Kruskal–Wallis, and Tukey's honestly significant difference test (P < 0.05. Results: Polymerization shrinkage (0.99% and shrinkage stress (233.21 Mpa of silorane were less compared to microhybrid (2.14% and 472.43 Mpa and nanohybrid (2.32% and 464.88 Mpa. Silorane (7.92×/1011 μm/mm3 and nanohybrid (7.79×/1011 showed superior WR than microhybrid (1.113×/1017. There was no significant difference in compressive stress among the groups. Conclusion: Silorane exhibited less polymerization shrinkage and shrinkage stress compared to methacrylates. Silorane and nanohybrid showed greater WR compared to microhybrid. CS of all groups was similar.

  2. Modeling and analytical simulation of anterior polymerization in the ...

    African Journals Online (AJOL)

    The study shows that the Frank-Kamenetskii number and frequency factors of the two reactions have significant effects on the propagation of the polymerization wave. Keywords: Polymerization, anterior polymerization, polymers, Arrhenius kinetics, parameter-expanding method, eigenfunctions expansion technique ...

  3. 21 CFR 872.6070 - Ultraviolet activator for polymerization.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Ultraviolet activator for polymerization. 872.6070... (CONTINUED) MEDICAL DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6070 Ultraviolet activator for polymerization. (a) Identification. An ultraviolet activator for polymerization is a device that produces...

  4. Threshold Particle Diameters in Miniemulsion Reversible-Deactivation Radical Polymerization

    Directory of Open Access Journals (Sweden)

    Hidetaka Tobita

    2011-11-01

    Full Text Available Various types of controlled/living radical polymerizations, or using the IUPAC recommended term, reversible-deactivation radical polymerization (RDRP, conducted inside nano-sized reaction loci are considered in a unified manner, based on the polymerization rate expression, Rp = kp[M]K[Interm]/[Trap]. Unique miniemulsion polymerization kinetics of RDRP are elucidated on the basis of the following two factors: (1 A high single molecule concentration in a nano-sized particle; and (2 a significant statistical concentration variation among particles. The characteristic particle diameters below which the polymerization rate start to deviate significantly (1 from the corresponding bulk polymerization, and (2 from the estimate using the average concentrations, can be estimated by using simple equations. For stable-radical-mediated polymerization (SRMP and atom-transfer radical polymerization (ATRP, an acceleration window is predicted for the particle diameter range, . For reversible-addition-fragmentation chain-transfer polymerization (RAFT, degenerative-transfer radical polymerization (DTRP and also for the conventional nonliving radical polymerization, a significant rate increase occurs for . On the other hand, for  the polymerization rate is suppressed because of a large statistical variation of monomer concentration among particles.

  5. 21 CFR 177.2250 - Filters, microporous polymeric.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Filters, microporous polymeric. 177.2250 Section... as Components of Articles Intended for Repeated Use § 177.2250 Filters, microporous polymeric. Microporous polymeric filters identified in paragraph (a) of this section may be safely used, subject to the...

  6. TEMPERATURE EFFECTS ON THE KINETICS OF PHOTOINITIATED POLYMERIZATION OF DIMETHACRYLATES

    NARCIS (Netherlands)

    BROER, DJ; MOL, GN; CHALLA, G

    1991-01-01

    The photoinitiated polymerization of three bisphenol-A-based dimethacrylates is studied. The polymerization rate of the dimethacrylate increases with temperature up to 160-degrees-C. Above this temperature depropagation starts to dominate the polymerization and the rate approaches zero above

  7. Complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III)

    OpenAIRE

    Ferenc, W.; Bernat, M.; Sarzyński, J.; Głuchowska, H.

    2010-01-01

    The complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) have been synthesized as polycrystalline hydrated solids, and characterized by elemental analysis, spectroscopy, magnetic studies and also by X-ray diffraction and thermogravimetric measurements. The analysed complexes have the following colours: violet for Nd(III), white for Gd(III) and cream for Ho(III) compounds. The carboxylate groups bind as bidentate chelating (Ho) or bridging ligands (Nd, Gd). On heating to 1173K ...

  8. STUDY ON THE ENERGETIC PARAMETERS IN A PHOTOTHERMIC SENSOR WITH BLACK POLYMERIC FILM

    Directory of Open Access Journals (Sweden)

    A. Benmoussat

    2010-06-01

    Full Text Available Renewable energies such as thermal solar energy are accessible energy hydrous for desalination water, recycling and hot water production. Heat is produced by greenhouse effect in the sensor. It is no polluting form of energy according to the sustainable development.In this paper the design of sensor photothermic prototype with polymeric film absorbing, the materials radiation properties, the analysis of different energy losses in the system and the energy balance will be presented. The evolution of incidental solarillumination on the horizontal plan of sensor and the temperature distribution are studied. Results showed that the temperature obtained by thermal conversion depends on the absorbing characteristics of the polymeric film, radiation intensity and time exposure.

  9. STUDY ON THE ENERGETIC PARAMETERS IN A PHOTOTHERMIC SENSOR WITH BLACK POLYMERIC FILM

    Directory of Open Access Journals (Sweden)

    A. Benmoussat

    2015-08-01

    Full Text Available Renewable energies such as thermal solar energy are accessible energy hydrous for desalination water, recycling and hot water production. Heat is produced by greenhouse effect in the sensor. It is no polluting form of energy according to the sustainable development.In this paper the design of sensor photothermic prototype with polymeric film absorbing, the materials radiation properties, the analysis of different energy losses in the system and the energy balance will be presented. The evolution of incidental solar illumination on the horizontal plan of sensor and the temperature distribution are studied.Results showed that the temperature obtained by thermal conversion depends on the absorbing characteristics of the polymeric film, radiation intensity and time exposure.

  10. STUDY ON THE ENERGETIC PARAMETERS IN A PHOTOTHERMIC SENSOR WITH BLACK POLYMERIC FILM

    Directory of Open Access Journals (Sweden)

    A. Benmoussat

    2010-06-01

    Full Text Available Renewable energies such as thermal solar energy are accessible energy hydrous for desalination water, recycling and hot water production. Heat is produced by greenhouse effect in the sensor. It is no polluting form of energy according to the sustainable development. In this paper the design of sensor photothermic prototype with polymeric film absorbing, the materials radiation properties, the analysis of different energy losses in the system and the energy balance will be presented. The evolution of incidental solar illumination on the horizontal plan of sensor and the temperature distribution are studied. Results showed that the temperature obtained by thermal conversion depends on the absorbing characteristics of the polymeric film, radiation intensity and time exposure.

  11. Acrylamide inverse miniemulsion polymerization: in situ, real-time monitoring using nir spectroscopy

    Directory of Open Access Journals (Sweden)

    M. M. E. Colmán

    2014-12-01

    Full Text Available In this work, the ability of on-line NIR spectroscopy for the prediction of the evolution of monomer concentration, conversion and average particle diameter in acrylamide inverse miniemulsion polymerization was evaluated. The spectral ranges were chosen as those representing the decrease in concentration of monomer. An increase in the baseline shift indicated that the NIR spectra were affected by particle size. Multivariate partial least squares calibration models were developed to relate NIR spectra collected by the immersion probe with off-line conversion and polymer particle size data. The results showed good agreement between off-line data and values predicted by the NIR calibration models and these latter were also able to detect different types of operational disturbances. These results indicate that it is possible to monitor variables of interest during acrylamide inverse miniemulsion polymerizations.

  12. Signal amplification strategies for DNA and protein detection based on polymeric nanocomposites and polymerization: A review

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Shaohong; Yuan, Liang; Hua, Xin; Xu, Lingling; Liu, Songqin, E-mail: liusq@seu.edu.cn

    2015-06-02

    Highlights: • We review the innovative advances in polymer-based signal amplification. • Conceptual connectivity between different amplified methodologies is illustrated. • Examples explain the mechanisms of polymers/polymerizations-based amplification. • Several elegant applications are summarized that illustrate underlying concept. - Abstract: Demand is increasing for ultrasensitive bioassays for disease diagnosis, environmental monitoring and other research areas. This requires novel signal amplification strategies to maximize the signal output. In this review, we focus on a series of significant signal amplification strategies based on polymeric nanocomposites and polymerization. Some common polymers are used as carriers to increase the local concentration of signal probes and/or biomolecules on their surfaces or in their interiors. Some polymers with special fluorescence and optical properties can efficiently transfer the excitation energy from a single site to the whole polymer backbone. This results in superior fluorescence signal amplification due to the resulting collective effort (integration of signal). Recent polymerization-based signal amplification strategies that employ atom transfer radical polymerization (ATRP) and photo-initiated polymerization are also summarized. Several distinctive applications of polymers in ultrasensitive bioanalysis are highlighted.

  13. Changes in chroma of two indirect composite materials polymerized with different polymerization systems.

    Science.gov (United States)

    Ayano, Michiya

    2012-01-01

    This study evaluated chroma change in two composite materials (Sinfony and Pearleste) polymerized with two different systems. Disk specimens were prepared using a metal halide unit (Hyper LII) and an exposure time of 60 to 180 s. The proprietary polymerization systems (Visio and Pearlcure systems) were used as the reference polymerization modes. After storage at 37°C for 24 h, CIE 1976 L*a*b* values were measured by using a dental chroma meter (ShadeEye NCC) with a gray background. The specimens were then immersed in water or tea. Color change from baseline to 4 weeks was evaluated by measuring ΔL*, Δa*, and Δb*, after which ΔE*(ab) values were calculated. The brightness of Sinfony specimens was reduced by tea immersion. The color of both materials shifted to yellow after tea immersion, although color change in Sinfony specimens was greater than that in Pearleste specimens. For both materials, color change was less after polymerization with the metal halide unit. In conclusion, Sinfony polymerized with the Hyper LII unit, and Pearleste polymerized with either system, were stable against discoloration due to tea immersion.

  14. NATO Advanced Study Institute on Ring-opening Metathesis Polymerization of Olefins and Polymerization of Alkynes

    CERN Document Server

    1998-01-01

    The first NATO Advanced Study Institute on Olefin Metathesis and Polymerization Catalysts was held on September 10-22, 1989 in Akcay, Turkey. Based on the fundamental research of RRSchrock, RGrubbs and K.B.Wagener in the field of ring opening metathesis polymerization (ROMP), acyclic diene metathesis (ADMET) and alkyne polymerization, these areas gained growing interest within the last years. Therefore the second NATO-ASI held on metathesis reactions was on Ring Opening Metathesis Po­ lymerization of Olefins and Polymerization of Alkynes on September 3-16, 1995 in Akcay, Turkey. The course joined inorganic, organic and polymer chemists to exchange their knowledge in this field. This volume contains the main and short lectures held in Akcay. To include ADMET reactions better into the title of this volume we changed it into: Metathesis Polymerization of Olefins and Alkyne Polymerization. This volume is addressed to research scientists, but also to those who start to work in the area of olefin metathesis and al...

  15. Lutetium(III cyclotetraphosphate

    Directory of Open Access Journals (Sweden)

    Aïcha Mbarek

    2010-06-01

    Full Text Available Single crystals of the title compound, tetralutetium(III tris(cyclotetraphosphate, Lu4(P4O123, were obtained by solid-state reaction. The cubic structure is isotypic with its AlIII and ScIII analogues and is built up from four-membered (P4O124− phosphate ring anions (overline{4} symmetry, isolated from each other and further linked through isolated LuO6 octahedra (.3. symmetry via corner sharing. Each LuO6 octahedron is linked to six (P4O124− rings, while each (P4O124− ring is linked to eight LuO6 octahedra.

  16. III-V microelectronics

    CERN Document Server

    Nougier, JP

    1991-01-01

    As is well known, Silicon widely dominates the market of semiconductor devices and circuits, and in particular is well suited for Ultra Large Scale Integration processes. However, a number of III-V compound semiconductor devices and circuits have recently been built, and the contributions in this volume are devoted to those types of materials, which offer a number of interesting properties. Taking into account the great variety of problems encountered and of their mutual correlations when fabricating a circuit or even a device, most of the aspects of III-V microelectronics, from fundamental p

  17. Mechanisms of the Shape Memory Effect in Polymeric Materials

    Directory of Open Access Journals (Sweden)

    Xuelian Wu

    2013-09-01

    Full Text Available This review paper summarizes the recent research progress in the underlying mechanisms behind the shape memory effect (SME and some newly discovered shape memory phenomena in polymeric materials. It is revealed that most polymeric materials, if not all, intrinsically have the thermo/chemo-responsive SME. It is demonstrated that a good understanding of the fundamentals behind various types of shape memory phenomena in polymeric materials is not only useful in design/synthesis of new polymeric shape memory materials (SMMs with tailored performance, but also helpful in optimization of the existing ones, and thus remarkably widens the application field of polymeric SMMs.

  18. Biocompatible Polymeric Materials Intended for Drug Delivery and Therapeutic Applications

    DEFF Research Database (Denmark)

    Hvilsted, Søren; Javakhishvili, Irakli; Bednarek, Melania

    2007-01-01

    of polymer blocks by “click chemistry”. An all polymerization strategy would imply preparing polymers by living/controlled techniques in such a manner that one block after polymerization can be converted to a macroinitiator enabling the second block to polymerize. The coupling strategy invariably inserts......With the advent of the controlled free radical polymerization techniques and the novel highly efficient coupling technique (“click chemistry”1) a number of new design principles for biomedical polymeric materials emerge. We’ve recently initiated a comprehensive research programme aiming...

  19. Teaching Evolution

    Science.gov (United States)

    Bryner, Jeanna

    2005-01-01

    Eighty years after the famous 1925 Scopes "monkey trial," which tested a teacher's right to discuss the theory of evolution in the classroom, evolution--and its most recent counterview, called "intelligent design"--are in the headlines again, and just about everyone seems to have an opinion. This past July, President Bush weighed in, telling…

  20. Target-triggered polymerization for biosensing.

    Science.gov (United States)

    Wu, Yafeng; Wei, Wei; Liu, Songqin

    2012-09-18

    Because of the potential applications of biosensors in clinical diagnosis, biomedical research, environmental analysis, and food quality control, researchers are very interested in developing sensitive, selective, rapid, reliable, and low-cost versions of these devices. A classic biosensor directly transduces ligand-target binding events into a measurable physical readout. Because of the limited detection sensitivity and selectivity in earlier biosensors, researchers have developed a number of sensing/signal amplification strategies. Through the use of nanostructured or long chain polymeric materials to increase the upload of signal tags for amplification of the signal readout associated with the ligand-target binding events, researchers have achieved high sensitivity and exceptional selectivity. Very recently, target-triggered polymerization-assisted signal amplification strategies have been exploited as a new biosensing mechanism with many attractive features. This strategy couples a small initiator molecule to the DNA/protein detection probe prior to DNA hybridization or DNA/protein and protein/protein binding events. After ligand-target binding, the in-situ polymerization reaction is triggered. As a result, tens to hundreds of small monomer signal reporter molecules assemble into long chain polymers at the location where the initiator molecule was attached. The resulting polymer materials changed the optical and electrochemical properties at this location, which make the signal easily distinguishable from the background. The assay time ranged from minutes to hours and was determined by the degree of amplification needed. In this Account, we summarize a series of electrochemical and optical biosensors that employ target-triggered polymerization. We focus on the use of atom transfer radical polymerization (ATRP), as well as activator generated electron transfer for atom transfer radical polymerization (AGET ATRP) for in-situ formation of polymer materials for

  1. Complex Macromolecular Architectures by Living Cationic Polymerization

    KAUST Repository

    Alghamdi, Reem D.

    2015-05-01

    Poly (vinyl ether)-based graft polymers have been synthesized by the combination of living cationic polymerization of vinyl ethers with other living or controlled/ living polymerization techniques (anionic and ATRP). The process involves the synthesis of well-defined homopolymers (PnBVE) and co/terpolymers [PnBVE-b-PCEVE-b-PSiDEGVE (ABC type) and PSiDEGVE-b-PnBVE-b-PSiDEGVE (CAC type)] by sequential living cationic polymerization of n-butyl vinyl ether (nBVE), 2-chloroethyl vinyl ether (CEVE) and tert-butyldimethylsilyl ethylene glycol vinyl ether (SiDEGVE), using mono-functional {[n-butoxyethyl acetate (nBEA)], [1-(2-chloroethoxy) ethyl acetate (CEEA)], [1-(2-(2-(t-butyldimethylsilyloxy)ethoxy) ethoxy) ethyl acetate (SiDEGEA)]} or di-functional [1,4-cyclohexanedimethanol di(1-ethyl acetate) (cHMDEA), (VEMOA)] initiators. The living cationic polymerizations of those monomers were conducted in hexane at -20 0C using Et3Al2Cl3 (catalyst) in the presence of 1 M AcOEt base.[1] The PCEVE segments of the synthesized block terpolymers were then used to react with living macroanions (PS-DPE-Li; poly styrene diphenyl ethylene lithium) to afford graft polymers. The quantitative desilylation of PSiDEGVE segments by n-Bu4N+F- in THF at 0 °C led to graft co- and terpolymers in which the polyalcohol is the outer block. These co-/terpolymers were subsequently subjected to “grafting-from” reactions by atom transfer radical polymerization (ATRP) of styrene to afford more complex macromolecular architectures. The base assisted living cationic polymerization of vinyl ethers were also used to synthesize well-defined α-hydroxyl polyvinylether (PnBVE-OH). The resulting polymers were then modified into an ATRP macro-initiator for the synthesis of well-defined block copolymers (PnBVE-b-PS). Bifunctional PnBVE with terminal malonate groups was also synthesized and used as a precursor for more complex architectures such as H-shaped block copolymer by “grafting-from” or

  2. The Evaluation of 3-Dimensional Polymerization Changes of a Denture Resin Utilizing Injection Molding with Water Bath Polymerization and Microwave Polymerization

    Science.gov (United States)

    2016-06-01

    The Evaluation of 3-Dimensional Polymerization Changes of a Denture Resin Utilizing Injection Molding with Water Bath Polymerization and Microwave...to the patient.[4] Since 1937, advances in PMMA technology such as injection molding of denture resin rather than compression molding and...denture acrylic will be mixed and injected by the Success® machine through the sprue space into each mold .  The flasks were polymerized by water

  3. Metallothionein (MT)-III

    DEFF Research Database (Denmark)

    Carrasco, J; Giralt, M; Molinero, A

    1999-01-01

    Metallothionein-III is a low molecular weight, heavy-metal binding protein expressed mainly in the central nervous system. First identified as a growth inhibitory factor (GIF) of rat cortical neurons in vitro, it has subsequently been shown to be a member of the metallothionein (MT) gene family a...

  4. BANANAS III (ARTIC

    African Journals Online (AJOL)

    Fr. Ikenga

    Key words: Cross-Retaliation, Justiciability, EC-Bananas III, Countermeasure. 1. Introduction. The World Trade Organisation (WTO) as an international legal personality regulates the World. Trading System to ensure smooth, free, fair and predictable flow of international trade. It is. “the only International Organisation dealing ...

  5. Cobalt(III) complex

    Indian Academy of Sciences (India)

    Administrator

    . 2 radicals ... Crystal structure of the complex was determined by X-ray diffraction and is reported elsewhere. 5. The complex is stable towards hydrolysis at least for 10 h as checked by its ..... served in Co(III) aquo-ammonia complexes where.

  6. Raman Laser Polymerization of C60 Nanowhiskers

    Directory of Open Access Journals (Sweden)

    Ryoei Kato

    2012-01-01

    Full Text Available Photopolymerization of C60 nanowhiskers (C60NWs was investigated by using a Raman spectrometer in air at room temperature, since the polymerized C60NWs are expected to exhibit a high mechanical strength and a thermal stability. Short C60NWs with a mean length of 4.4 μm were synthesized by LLIP method (liquid-liquid interfacial precipitation method. The Ag(2 peak of C60NWs shifted to the lower wavenumbers with increasing the laser beam energy dose, and an energy dose more than about 1520 J/mm2 was found necessary to obtain the photopolymerized C60NWs. However, excessive energy doses at high-power densities increased the sample temperature and lead to the thermal decomposition of polymerized C60 molecules.

  7. Polymeric multilayer capsules in drug delivery.

    Science.gov (United States)

    De Cock, Liesbeth J; De Koker, Stefaan; De Geest, Bruno G; Grooten, Johan; Vervaet, Chris; Remon, Jean Paul; Sukhorukov, Gleb B; Antipina, Maria N

    2010-09-17

    Recent advances in medicine and biotechnology have prompted the need to develop nanoengineered delivery systems that can encapsulate a wide variety of novel therapeutics such as proteins, chemotherapeutics, and nucleic acids. Moreover, these delivery systems should be "intelligent", such that they can deliver their payload at a well-defined time, place, or after a specific stimulus. Polymeric multilayer capsules, made by layer-by-layer (LbL) coating of a sacrificial template followed by dissolution of the template, allow the design of microcapsules in aqueous conditions by using simple building blocks and assembly procedures, and provide a previously unmet control over the functionality of the microcapsules. Polymeric multilayer capsules have recently received increased interest from the life science community, and many interesting systems have appeared in the literature with biodegradable components and biospecific functionalities. In this Review we give an overview of the recent breakthroughs in their application for drug delivery.

  8. Simultaneous covalent and noncovalent hybrid polymerizations

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Zhilin; Tantakitti, Faifan; Yu, Tao; Palmer, Liam C.; Schatz, George C.; Stupp, Samuel I. (NWU)

    2016-01-28

    Covalent and supramolecular polymers are two distinct forms of soft matter, composed of long chains of covalently and noncovalently linked structural units, respectively. We report a hybrid system formed by simultaneous covalent and supramolecular polymerizations of monomers. The process yields cylindrical fibers of uniform diameter that contain covalent and supramolecular compartments, a morphology not observed when the two polymers are formed independently. The covalent polymer has a rigid aromatic imine backbone with helicoidal conformation, and its alkylated peptide side chains are structurally identical to the monomer molecules of supramolecular polymers. In the hybrid system, covalent chains grow to higher average molar mass relative to chains formed via the same polymerization in the absence of a supramolecular compartment. The supramolecular compartments can be reversibly removed and re-formed to reconstitute the hybrid structure, suggesting soft materials with novel delivery or repair functions.

  9. Inflation and Instability of a Polymeric Membrane

    DEFF Research Database (Denmark)

    Hassager, Ole; Kristensen, Susanne Brogaard; Larsen, Johannes Ruben

    1999-01-01

    We consider an axisymmetric polymeric membrane inflated by a uniform pressure difference acting across the membrane. The polymeric material is described by an arbitrary combination of a viscoelastic and a purely viscous component to the stress. Some viscoelastic materials described by a Mooney......-Rivlin model show a monotone increasing pressure during inflation of a spherical membrane. These materials develop a homogeneous membrane thickness in agreement with the Considere-Pearson condition. Molecularly based models such as the neo-Hookean, Doi-Edwards or Tom-Pom model show a pressure maximum when...... inflated. Membranes described by these models develop a local thinning of the membrane which may lead to bursting in finite time. (C) 1999 Elsevier Science B.V. All rights reserved....

  10. Self-folding micropatterned polymeric containers.

    Science.gov (United States)

    Azam, Anum; Laflin, Kate E; Jamal, Mustapha; Fernandes, Rohan; Gracias, David H

    2011-02-01

    We demonstrate self-folding of precisely patterned, optically transparent, all-polymeric containers and describe their utility in mammalian cell and microorganism encapsulation and culture. The polyhedral containers, with SU-8 faces and biodegradable polycaprolactone (PCL) hinges, spontaneously assembled on heating. Self-folding was driven by a minimization of surface area of the liquefying PCL hinges within lithographically patterned two-dimensional (2D) templates. The strategy allowed for the fabrication of containers with variable polyhedral shapes, sizes and precisely defined porosities in all three dimensions. We provide proof-of-concept for the use of these polymeric containers as encapsulants for beads, chemicals, mammalian cells and bacteria. We also compare accelerated hinge degradation rates in alkaline solutions of varying pH. These optically transparent containers resemble three-dimensional (3D) micro-Petri dishes and can be utilized to sustain, monitor and deliver living biological components.

  11. A polymeric oxovanadium(IV pyromellitate complex

    Directory of Open Access Journals (Sweden)

    DJORDJE STOJAKOVIC

    1999-09-01

    Full Text Available The reaction of oxovanadium(IV sulphate with 1,2,4,5-benzenetetracarboxylic acid (pyromellitic acid in the presence of potassium carbonate yields a polymeric complex, K2[VO(pyr]·6H2O (I [pyr = pyromellitate(4- ion]. The PM3(tm calculations and IR spectroscopy suggest that the polymeric structure of I consists of -V-pyr-V-pyr- chains formed by the 1,4- or 1,5-bridging by the pyr ions. The chains are additionally cross-linked by the chelate function of one of the COO- groups of the pyr ion. Magnetic measurements do not reveal the presence of antiferromagnetic coupling between the V centers.

  12. Wettability of nonwoven polymeric nanofiber mats

    Science.gov (United States)

    Munoz, Edgar

    The wettability of heterogeneous materials has been attracting special interest by academia and industrial sector given the need to development self-cleaning Nonwoven nanofiber mats have demonstrated potential given its hydrophobicity granted by the ultimate structure of the system, small fiber diameter and small pores giving rise to effects such as the Cassie-Baxter. This thesis analyzed the wettability of a wide range of polymeric systems. Nanofiber mats were manufactured using the ForcespinningRTM technology. Samples were prepared at different polymeric concentrations and rotational speeds to alter fiber size; density of the mat was also altered to evaluate the effect of porosity on the wettability. Scanning Electron Microscopy (SEM) was used to characterize the mats and contact angle studies were conducted to better understand wettability of the developed surfaces.

  13. Designing Polymeric Microfluidic Platforms for Biomedical Applications

    DEFF Research Database (Denmark)

    Vedarethinam, Indumathi

    Cytogenetics laboratories. During the course of this project, initially the suitability of the polymeric chip substrate was tested and a microfluidic device was developed for performing interphase FISH analysis. With this device, the key factors involved in chromosome spreading crucial to FISH analysis were...... further investigated. Based on the insights gained, a micro splashing device was designed to achieve well-spread chromosomes and a rapidly assembled microFISH device was presented for metaphase analysis. Further, a single polymeric microfluidic device was developed to semi-automate the FISH analysis. ii......) Culturing brain slices and monitoring the integration of neuronal stem cells upon cultured brain slices. These studies will aid to design novel therapeutic approaches for neurodegenerative disease. The aim of this project was to create a microfludic cell culture chamber and keep a brain slice alive...

  14. Chemical characterization of selected LDEF polymeric materials

    Science.gov (United States)

    Young, Philip R.; Slemp, Wayne S.

    1992-01-01

    The chemical characterization of selected polymeric materials which received exposure on the LDEF is reported. The specimens examined include silvered fluorinated ethylene propylene (FEP) teflon thermal blanket material, polysulfone matrix resin/graphite fiber reinforced composites, and several high performance polymer films. These specimens came from numerous LDEF locations and, thus, received different environmental exposures. The results of infrared, thermal, x ray photoelectron, and various solution property analyses have shown no significant change at the molecular level in the polymer that survived exposure. However, scanning electron and scanning tunneling microscopies show resin loss and a texturing of the surface of some specimens which resulted in a change in optical properties. The potential effect of a silicon containing molecular contamination on these materials is addressed. The possibility of continued post-exposure degradation of some polymeric films is also proposed.

  15. Polyisoprene Nanoparticles Prepared by Polymerization in Microemulsion

    Directory of Open Access Journals (Sweden)

    Y. Apolinar

    2010-01-01

    Full Text Available Batch polymerization of isoprene was carried out at 25∘C in a normal microemulsion stabilized with sodium dodecyl sulfate and initiated with the redox couple tert-butyl hydroperoxide/tetraethylene-pentamine. Characterization by transmission electronic microscopy showed that polyisoprene nanoparticles with number-average diameter close to 20 nm were obtained. The low molecular weights obtained, as determined by gel permeation chromatography, were probably due to chain scission as inferred from the oxidative ambient at which polymerization was carried out. Microstructure calculated from infrared spectroscopy data indicates that the obtained polyisoprene contains around 80% total 1,4 units, which is in accordance with its glass transition temperature (-60.8∘C determined by differential scanning calorimetry.

  16. Intracellular temperature measurements with fluorescent polymeric thermometers.

    Science.gov (United States)

    Uchiyama, Seiichi; Gota, Chie; Tsuji, Toshikazu; Inada, Noriko

    2017-10-05

    In 2003, we successfully created the first fluorescent polymeric thermometer by combining a thermo-responsive polymer and an environment-sensitive (polarity and hydrogen bonding-sensitive) fluorophore. Its high sensitivity to temperature variation and high hydrophilicity, even under conditions of high ionic strength, enabled intracellular temperature measurements. Along with the progress of our research projects, the development of new luminescent molecular thermometers and the establishment of novel methods for measuring intracellular temperature have matured in this field. In this Feature Article, we summarize the background and history of intracellular temperature measurements using fluorescent polymeric thermometers based on studies performed in our laboratory and the relationship between our methods and those of other eminent research groups. Future research directions regarding intracellular temperature measurements are also discussed.

  17. In-situ polymerized PLOT columns III: divinylbenzene copolymers and dimethacrylate homopolymers

    Science.gov (United States)

    Shen, T. C.; Fong, M. M.

    1994-01-01

    Studies of divinylbenzene copolymers and dimethacrylate homopolymers indicate that the polymer pore size controls the separation of water and ammonia on porous-layer-open-tubular (PLOT) columns. To a lesser degree, the polarity of the polymers also affects the separation of a water-ammonia gas mixture. Our results demonstrate that the pore size can be regulated by controlling the cross-linking density or the chain length between the cross-linking functional groups. An optimum pore size will provide the best separation of water and ammonia.

  18. On viscoelastic instability in polymeric filaments

    DEFF Research Database (Denmark)

    Rasmussen, Henrik Koblitz; Hassager, Ole

    1999-01-01

    The 3D Lagrangian Integral Method is used to simulate the effects of surface tension on the viscoelastic end-plate instability, occuring in the rapid extension of some polymeric filaments between parallel plates. It is shovn that the surface tension delays the onset of the instability. Furthermore...... it is demonstrated that surface tension plays a key role in the selection of the most unstable mode...

  19. Long-time asymptotics for polymerization models

    OpenAIRE

    Calvo, Juan; Doumic, Marie; Perthame, Benoît

    2017-01-01

    This study is devoted to the long-term behavior of nucleation, growth and fragmentation equations, modeling the spontaneous formation and kinetics of large polymers in a spatially homogeneous and closed environment. Such models are, for instance, commonly used in the biophysical community in order to model in vitro experiments of fibrillation. We investigate the interplay between four processes: nucleation, polymeriza-tion, depolymerization and fragmentation. We first revisit the well-known L...

  20. Single-Molecule Visualization of Living Polymerization

    Science.gov (United States)

    2014-02-18

    77 (2011). 11 D. P. Allen , M. M. Van Wingerden & R. H. Grubbs. Well-defined silica-supported olefin metathesis catalysts. Org Lett 11, 1261-1264...magnet position), we can also probe how mechanical tension affects the catalytic kinetics of the polymerization. When the magnets are positioned far...the setup include: two rectangular NdFeB magnets mounted on a rotatable base controlled by a motor via a timing belt , collimated LED illumination

  1. EDOT polymerization at photolithographically patterned functionalized graphene

    Czech Academy of Sciences Publication Activity Database

    Kovaříček, Petr; Drogowska, Karolina; Melníková Komínková, Zuzana; Blechta, Václav; Bastl, Zdeněk; Gromadzki, Daniel; Fridrichová, Michaela; Kalbáč, Martin

    2017-01-01

    Roč. 113, MAR 2017 (2017), s. 33-39 ISSN 0008-6223 R&D Projects: GA MŠk LL1301; GA MŠk(CZ) LM2015073 Grant - others:AVČR PPPLZ(CZ) L200401551 Institutional support: RVO:61388955 Keywords : polymerization * electrochemical doping * graphene Subject RIV: CF - Physical ; Theoretical Chemistry OBOR OECD: Physical chemistry Impact factor: 6.337, year: 2016

  2. Allylthioketone Mediated Free Radical Polymerization of Methacrylates

    Directory of Open Access Journals (Sweden)

    Feng Zhong

    2017-11-01

    Full Text Available By combination of high trapping free radical efficiency of the thioketone and resonance of the allylic radical, a new type of mediating agent, 1,3,3-triphenylprop-2-ene-1-thione (TPPT has been successfully synthesized, and then is used to study controlled free radical polymerization of methacrylates. Very stable TPPT radicals at the end of poly(methyl methacrylate (PMMA are detected in the polymerization of MMA using TPPT and AIBN as the control agent and initiator. The MALDI-TOF MS spectra are used to identify terminal groups of the resultant poly(glycidyl methacrylate (PGMA, and major component of the obtained polymer has the structure, (CH32(CNC-PGMA-C7H9O3. Chain extension reaction tests ascertain formation of the dead polymers during the polymer storage and purification process of the polymers. Owing to very slow fragmentation reaction of the TPPT-terminated polymethacrylate radical and addition reaction of this radical with a primary radical, the growing chain radicals are difficult to be regenerated, leading to an unobvious change of the molecular weight with monomer conversion. The molecular weights of polymers can be controlled by the ratios of monomer/initiator and TPPT/initiator. However, the first order kinetics of the polymerization and the polymers with narrow polydispersity are obtained, and these phenomena are discussed. This study provides useful information on how to design a better controlling agent.

  3. Polymerization initated at sidewalls of carbon nanotubes

    Science.gov (United States)

    Tour, James M. (Inventor); Hudson, Jared L. (Inventor); Krishnamoorti, Ramanan (Inventor); Yurekli, Koray (Inventor); Mitchell, Cynthia A. (Inventor)

    2011-01-01

    The present invention is directed to aryl halide (such as aryl bromide) functionalized carbon nanotubes that can be utilized in anionic polymerization processes to form polymer-carbon nanotube materials with improved dispersion ability in polymer matrices. In this process the aryl halide is reacted with an alkyllithium species or is reacted with a metal to replace the aryl-bromine bond with an aryl-lithium or aryl-metal bond, respectively. It has further been discovered that other functionalized carbon nanotubes, after deprotonation with a deprotonation agent, can similarly be utilized in anionic polymerization processes to form polymer-carbon nanotube materials. Additionally or alternatively, a ring opening polymerization process can be performed. The resultant materials can be used by themselves due to their enhanced strength and reinforcement ability when compared to their unbound polymer analogs. Additionally, these materials can also be blended with pre-formed polymers to establish compatibility and enhanced dispersion of nanotubes in otherwise hard to disperse matrices resulting in significantly improved material properties. The resultant polymer-carbon nanotube materials can also be used in drug delivery processes due to their improved dispersion ability and biodegradability, and can also be used for scaffolding to promote cellular growth of tissue.

  4. Homogeneous catalysts for stereoregular olefin polymerization

    Science.gov (United States)

    Marks, T.J.; Eisen, M.S.; Giardello, M.A.

    1994-07-19

    The synthesis, and use as precatalysts of chiral organozirconium complexes for olefin polymerization are disclosed, having the structure (C[sub 5]R[prime][sub 4[minus]x]R*[sub x])-A-(C[sub 5]R[double prime][sub 4[minus]y]R[prime][double prime][sub y])-M-Q[sub p], where x and y represent the number of unsubstituted locations on the cyclopentadienyl ring; R[prime], R[double prime], R[prime][double prime], and R* represent substituted and unsubstituted alkyl groups having 1--30 carbon atoms and R* is a chiral ligand; A is a fragment containing a Group 13, 14, 15, or 16 element of the Periodic Table; M is a Group 3, 4, or 5 metal of the Periodic Table; and Q is a hydrocarbyl radical, or halogen radical, with 3 [alkylation of the corresponding dichlorides. In the presence of methylalumoxane or triarylborane cocatalysts, these complexes form cation-like'' species which are highly active for olefin polymerization. In combination with a Lewis acid cocatalyst, propylene or other [alpha]-olefin polymerization can be effected with very high efficiency and isospecificity. 1 fig.

  5. Revisiting the Anionic Polymerization of Methyl Ethacrylate

    Energy Technology Data Exchange (ETDEWEB)

    Kennemur, Justin G. [Department of Chemistry and Biochemistry, Florida State University, Tallahassee FL 32306-4390 USA; Bates, Frank S. [Department of Chemical Engineering and Materials Science, University of Minnesota, Minneapolis MN 55455-0431 USA; Hillmyer, Marc A. [Department of Chemistry, University of Minnesota, Minneapolis MN 55455-0431 USA

    2017-09-26

    Synthesis of poly(methyl ethacrylate), (PMEA), in tetrahydrofuran at -78 °C using anionic polymerization techniques results in high molar mass (>30 kg mol-1), low dispersity (1.3), and high conversion (>81%). The molar masses of a series of samples are consistent with values anticipated by the monomer-to-initiator ratio and conversion. These results represent a significant improvement to earlier reported attempts to prepare PMEA using anionic methods. Successful diblock polymerization of polystyrene-block-PMEA, (PS-PMEA), and poly(4-tert-butylstyrene)-block-PMEA, (PtBS-PMEA), is achieved through sequential anionic polymerization techniques with dispersities as low as 1.06 and segment molar fractions close to those targeted. Broad principal scattering peaks observed by small-angle X-ray scattering (SAXS) for symmetric PS-PMEA at relatively high molar mass (39 kg mol-1) suggests an effective interaction parameter (χeff) that is smaller than for PS-block-poly(methyl methacrylate). On the other hand, PtBS-PMEA block polymers form a well-ordered morphology based on SAXS measurements and is attributable to the more hydrophobic PtBS segment. These results confirm the viability of PMEA as a new constituent in the expanding suite of polymers suitable for preparing nanostructured block polymers.

  6. Performance of selected polymeric materials on LDEF

    Science.gov (United States)

    Young, Philip R.; Slemp, Wayne S.; Stein, Bland A.

    1993-01-01

    The NASA Long Duration Exposure Facility (LDEF) provided a unique environmental exposure of a wide variety of materials for potential advanced spacecraft application. This paper examines the molecular level response of selected polymeric materials which flew onboard this vehicle. Polymers include epolyimide, polysulfone, and polystyrene film and polyimide, polysulfone, and epoxy matrix resin/graphite fiber reinforced composites. Several promising experimental films were also studied. Most specimens received 5.8 years of low Earth orbital (LEO) exposure on LDEF. Several samples received on 10 months of exposure. Chemical characterization techniques included ultraviolet-visible and infrared spectroscopy, thermal analysis, x-ray photoelectron spectroscopy, and selected solution property measurements. Results suggest that many molecular level effects present during the first 10 months of exposure were not present after 5.8 years of exposure for specimens on or near Row 9. Increased AO fluence near the end of the mission likely eroded away much environmentally induced surface phenomena. The objective of this work is to provide fundamental information for use in improving the performance of polymeric materials for LEO application. A secondary objective is to gain an appreciation for the constraints and limitations of results from LDEF polymeric materials experiments.

  7. Transient inter-cellular polymeric linker.

    Science.gov (United States)

    Ong, Siew-Min; He, Lijuan; Thuy Linh, Nguyen Thi; Tee, Yee-Han; Arooz, Talha; Tang, Guping; Tan, Choon-Hong; Yu, Hanry

    2007-09-01

    Three-dimensional (3D) tissue-engineered constructs with bio-mimicry cell-cell and cell-matrix interactions are useful in regenerative medicine. In cell-dense and matrix-poor tissues of the internal organs, cells support one another via cell-cell interactions, supplemented by small amount of the extra-cellular matrices (ECM) secreted by the cells. Here we connect HepG2 cells directly but transiently with inter-cellular polymeric linker to facilitate cell-cell interaction and aggregation. The linker consists of a non-toxic low molecular-weight polyethyleneimine (PEI) backbone conjugated with multiple hydrazide groups that can aggregate cells within 30 min by reacting with the aldehyde handles on the chemically modified cell-surface glycoproteins. The cells in the cellular aggregates proliferated; and maintained the cortical actin distribution of the 3D cell morphology while non-aggregated cells died over 7 days of suspension culture. The aggregates lost distinguishable cell-cell boundaries within 3 days; and the ECM fibers became visible around cells from day 3 onwards while the inter-cellular polymeric linker disappeared from the cell surfaces over time. The transient inter-cellular polymeric linker can be useful for forming 3D cellular and tissue constructs without bulk biomaterials or extensive network of engineered ECM for various applications.

  8. Trinity Evolution.

    Science.gov (United States)

    Rush, Shannon M

    2010-06-01

    Trinity Evolution Cryopreserved Cell Viable Bone Matrix is a minimally manipulated, human cellular, and tissue-based allograft containing adult mesenchymal stem cells, osteoprogenitor cells, and a demineralized cortical component. The cancellous bone used to produce Trinity Evolution is derived from freshly recovered donor tissue by Food and Drug Administration-registered facilities and processed under aseptic conditions. Preclinical in vivo and in vitro testing as well as strict donor screening has demonstrated the safety of Trinity Evolution as well as its osteoinductive and osteogenic potential contained within a natural osteoconductive matrix.

  9. Stellar evolution

    CERN Document Server

    Meadows, A J

    2013-01-01

    Stellar Evolution, Second Edition covers the significant advances in the understanding of birth, life, and death of stars.This book is divided into nine chapters and begins with a description of the characteristics of stars according to their brightness, distance, size, mass, age, and chemical composition. The next chapters deal with the families, structure, and birth of stars. These topics are followed by discussions of the chemical composition and the evolution of main-sequence stars. A chapter focuses on the unique features of the sun as a star, including its evolution, magnetic fields, act

  10. First stars evolution and nucleosynthesis

    Energy Technology Data Exchange (ETDEWEB)

    Bahena, D. [Institute of Astronomy of the Academy of Sciences, Bocni II 1401, 14131 Praha 4, (Czech Republic); Klapp, J. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico); Dehnen, H. [Fachbereich Physik, Universitat Konstanz, 78457 Konstanz (Germany)]. e-mail: bahen@hotmail.com

    2007-12-15

    The first stars in the universe were massive and luminous with typical masses M {>=} 100M. Metal-free stars have unique physical characteristics and exhibit high effective temperatures and small radii. These so called Population III stars were responsible for the initial enrichment of the intergalactic medium with heavy elements. In this work, we study the structure, evolution and nucleosynthesis of 100, 200, 250 and 300M galactic and pregalactic Population III mass losing stars with metallicities Z 10{sup -6} and Z = 10{sup -9}, during the hydrogen and helium burning phases. Using a stellar evolution code, a system of 10 structure and evolution equations together with boundary conditions, and a set of 30 nuclear reactions, are solved simultaneously, obtaining the star's structure, evolution, isotopic abundances and their ratios. Motivated by recent stability analysis, almost all very massive star (VMS) calculations during the past few years have been performed with no mass loss. However, it has recently been claimed that VMS should have strong mass loss. We present in this work new VMS calculations that includes mass loss. The main difference between zero-metal and metal-enriched stars lies in the nuclear energy generation mechanism. For the first stars, nuclear burning proceeds in a non-standard way. Since Population III stars can reach high central temperatures, this leads to the first synthesis of primary carbon through the 3 {alpha} reaction activating the CNO-cycles. Zero-metal stars produce light elements, such as He, C, N and O. Thus, very massive pregalactic Population III stars experienced self-production of C, either at the zero-age main sequence or in later phases of central hydrogen burning. In advanced evolutionary phases, these stars contribute to the chemical enrichment of the intergalactic medium through supernova explosions. (Author)

  11. Schumpeter's Evolution

    DEFF Research Database (Denmark)

    Andersen, Esben Sloth

    This draft of a book on Schumpeter is distributed for commenting. It is a stylised intellectual biography that focus on the emergence and extension of the Schumpeterian vision and analysis of economic and social evolution. The draft provides novel interpretations of Schumpeter's six major books. He...... originally developed his evolutionary research programme in Wesen from 1908 by studying the inherent limitations of Neoclassical Economics. He presented core results on economic evolution and sketched an extension evolutionary analysis to all social sciences in Entwicklung from 1912. He made a partial...... reworking of his basic theory of economic evolution in Development from 1934, and this reworking was continued in Cycles from 1939. Here Schumpeter also tried to handle the statistical and historical evidence on the waveform evolution of the capitalist economy. Capitalism from 1942 modified the model...

  12. Polymerization shrinkage of flowable resin-based restorative materials.

    Science.gov (United States)

    Stavridakis, Minos M; Dietschi, Didier; Krejci, Ivo

    2005-01-01

    This study measured the linear polymerization displacement and polymerization forces induced by polymerization shrinkage of a series of flowable resin-based restorative materials. The materials tested were 22 flowable resin-based restorative materials (Admira Flow, Aelite Flow, Aeliteflow LV, Aria, Crystal Essence, Definite Flow, Dyract Flow, Filtek Flow, FloRestore, Flow-it, Flow-Line, Freedom, Glacier, OmegaFlo, PermaFlo, Photo SC, Revolution 2, Star Flow, Synergy Flow, Tetric Flow, Ultraseal XT and Wave). Measurements for linear polymerization displacement and polymerization forces were performed using custom made measuring devices. Polymerization of the test materials was carried out for 60 seconds by means of a light curing unit, and each property was measured for 180 seconds from the start of curing in eight specimens for each material. Statistical evaluation of the data was performed with one-way analysis of variance (ANOVA), Tukey's Studentized Range (HSD) test (p=0.05) and simple linear regression. A wide range of values was recorded for linear polymerization displacement (26.61 to 80.74 microns) and polymerization forces (3.23 to 7.48 kilograms). Statistically significant differences among materials were found for both properties studied. Very few materials (Freedom, Glacier, and Photo SC) presented low values of linear polymerization displacement and polymerization forces (similar to hybrid resin composites), while the majority of materials presented very high values in both properties studied. Study of the shrinkage kinetics revealed the exponential growth process of both properties. The polymerization forces development exhibited a few seconds delay over linear polymerization displacement. Simple linear regression showed that the two polymerization shrinkage properties that were studied were not highly correlated (r2=0.59).

  13. Effects of axions on Population III stars

    Science.gov (United States)

    Choplin, Arthur; Coc, Alain; Meynet, Georges; Olive, Keith A.; Uzan, Jean-Philippe; Vangioni, Elisabeth

    2017-09-01

    Aims: Following the renewed interest in axions as a dark matter component, we revisit the effects of energy loss by axion emission on the evolution of the first generation of stars. These stars with zero metallicity are assumed to be massive, more compact, and hotter than subsequent generations. It is hence important to extend previous studies, which were restricted to solar metallicity stars. Methods: Our analysis first compares the evolution of solar metallicity 8, 10, and 12 M⊙ stars to previous work. We then calculate the evolution of 8 zero-metallicity stars with and without axion losses and with masses ranging from 20 to 150 M⊙. Results: For the solar metallicity models, we confirm the disappearance of the blue-loop phase for a value of the axion-photon coupling of gaγ = 10-10 GeV-1. We show that for gaγ = 10-10 GeV-1, the evolution of Population III stars is not much affected by axion losses, except within the range of masses 80-130 M⊙. Such stars show significant differences in both their tracks within the Tc-ρc diagram and their central composition (in particular 20Ne and 24Mg). We discuss the origin of these modifications from the stellar physics point of view, and also their potential observational signatures.

  14. Effect of Population III Multiplicity on Dark Star Formation

    Science.gov (United States)

    Stacy, Athena; Pawlik, Andreas H.; Bromm, Volker; Loeb, Abraham

    2012-01-01

    We numerically study the mutual interaction between dark matter (DM) and Population III (Pop III) stellar systems in order to explore the possibility of Pop III dark stars within this physical scenario. We perform a cosmological simulation, initialized at z approx. 100, which follows the evolution of gas and DM. We analyze the formation of the first mini halo at z approx. 20 and the subsequent collapse of the gas to densities of 10(exp 12)/cu cm. We then use this simulation to initialize a set of smaller-scale 'cut-out' simulations in which we further refine the DM to have spatial resolution similar to that of the gas. We test multiple DM density profiles, and we employ the sink particle method to represent the accreting star-forming region. We find that, for a range of DM configurations, the motion of the Pop III star-disk system serves to separate the positions of the protostars with respect to the DM density peak, such that there is insufficient DM to influence the formation and evolution of the protostars for more than approx. 5000 years. In addition, the star-disk system causes gravitational scattering of the central DM to lower densities, further decreasing the influence of DM over time. Any DM-powered phase of Pop III stars will thus be very short-lived for the typical multiple system, and DM will not serve to significantly prolong the life of Pop III stars.

  15. Calculus III essentials

    CERN Document Server

    REA, Editors of

    2012-01-01

    REA's Essentials provide quick and easy access to critical information in a variety of different fields, ranging from the most basic to the most advanced. As its name implies, these concise, comprehensive study guides summarize the essentials of the field covered. Essentials are helpful when preparing for exams, doing homework and will remain a lasting reference source for students, teachers, and professionals. Calculus III includes vector analysis, real valued functions, partial differentiation, multiple integrations, vector fields, and infinite series.

  16. Cross-Linked and Biodegradable Polymeric System as a Safe Magnetic Resonance Imaging Contrast Agent.

    Science.gov (United States)

    Luo, Qiang; Xiao, Xueyang; Dai, Xinghang; Duan, Zhenyu; Pan, Dayi; Zhu, Hongyan; Li, Xue; Sun, Ling; Luo, Kui; Gong, Qiyong

    2018-01-17

    Owing to the low efficacy of clinically used small-molecule gadolinium (Gd)-based magnetic resonance imaging (MRI) agents, we designed and explored biodegradable macromolecular conjugates as MRI contrast agents. The linear polymeric structure and core-cross-linked formulation possessed different characteristics and features, so we prepared and comparatively studied the two kinds of Gd-based N-(2-hydroxypropyl) methacrylamide (HPMA) polymeric systems (the core-cross-linked pHPMA-DOTA-Gd and the linear one) using the clinical agent diethylene-triamine pentaacetic acid-Gd(III) (DTPA-Gd) as a control. This study was aimed to find the optimal polymeric formulation as a biocompatible and efficient MRI contrast agent. The high molecular weight (MW, 181 kDa) and core-cross-linked copolymer was obtained via the cross-linked block linear copolymer and could be degraded to low-MW segments (29 kDa) in the presence of glutathione (GSH) and cleaned from the body. Both core-cross-linked and linear pHPMA-DOTA-Gd copolymers displayed 2-3-fold increased relaxivity (r1 value) than that of DTPA-Gd. Animal studies demonstrated that two kinds of macromolecular systems led to much longer blood circulation time, higher tumor accumulation, and much higher signal intensity compared with the linear and clinical ones. Finally, in vivo and in vitro toxicity studies indicated that the two macromolecular agents had great biocompatibility. Therefore, we performed preliminary but important studies on the Gd-based HPMA polymeric systems as biocompatible and efficient MRI contrast agents and found that the biodegradable core-cross-linked pHPMA-DOTA-Gd copolymer might have greater benefits for the foreground.

  17. Sensor calibration of polymeric Hopkinson bars for dynamic testing of soft materials

    Science.gov (United States)

    Martarelli, Milena; Mancini, Edoardo; Lonzi, Barbara; Sasso, Marco

    2018-02-01

    Split Hopkinson pressure bar (SHPB) testing is one of the most common techniques for the estimation of the constitutive behaviour of metallic materials. In this paper, the characterisation of soft rubber-like materials has been addressed by means of polymeric bars thanks to their reduced mechanical impedance. Due to their visco-elastic nature, polymeric bars are more sensitive to temperature changes than metallic bars, and due to their low conductance, the strain gauges used to measure the propagating wave in an SHPB may be exposed to significant heating. Consequently, a calibration procedure has been proposed to estimate quantitatively the temperature influence on strain gauge output. Furthermore, the calibration is used to determine the elastic modulus of the polymeric bars, which is an important parameter for the synchronisation of the propagation waves measured in the input and output bar strain gate stations, and for the correct determination of stress and strain evolution within the specimen. An example of the application has been reported in order to demonstrate the effectiveness of the technique. Different tests at different strain rates have been carried out on samples made of nytrile butadyene rubber (NBR) from the same injection moulding batch. Thanks to the correct synchronisation of the measured propagation waves measured by the strain gauges and applying the calibrated coefficients, the mechanical behaviour of the NBR material is obtained in terms of strain-rate–strain and stress–strain engineering curves.

  18. Novel polymer coatings based on plasma polymerized 2-methoxyethyl acrylate

    DEFF Research Database (Denmark)

    Wu, Zhenning; Jiang, Juan; Benter, Maike

    2008-01-01

    plasma system[4]. The system named SoftPlasma™ is equipped with unique three-phase pulsed AC voltage. Low energy plasma polymerization has almost no thermal load for sensitive polymer materials[5]. Plasma polymerized coatings are highly cross-linked, pin-hole free and provide hydrophilic or hydrophobic...... synthesized by Atom Transfer Radical Polymerization (ATRP)[3]. This enabled a surface segregation of the more hydrophilic block to the polymer/air interface and enrichment of the surface with PMEA. Here we present another way to modify a surface with this material - plasma polymerization in a low energy...... properties[4-6]. We have exploited these possibilities and prepared plasma polymerized 2-methoxyethyl acrylate (PPMEA) coatings on various polymer substrates. The PPMEA coatings were optimized using various plasma polymerization conditions and characterized by X-ray photoelectron spectroscopy...

  19. Evolution of regular geometrical shapes in fiber lumens

    KAUST Repository

    Le, Ngoc Lieu

    2017-08-17

    The geometry of polymeric hollow fibers for hemodialysis or desalination is a key factor determining their performance. Deformations are frequently observed, but they are rather random. Here we were able to exactly control the shape evolution of the internal channels or lumens of polymeric hollow fibers, leading to polygonal geometries with increasing number of sides. The elasticity of the incipient channel skin and instabilities during fiber formation are affected by the internal coagulant fluid composition and flow rate; and highly influence the polygonal shape. We propose a holistic explanation by analyzing the thermodynamic, kinetic and rheological aspects involved in the skin formation and their synergy.

  20. Preparation, Physical-Chemical Characterization, and Cytocompatibility of Polymeric Calcium Phosphate Cements

    Directory of Open Access Journals (Sweden)

    Rania M. Khashaba

    2011-01-01

    Full Text Available Aim. Physicochemical mechanical and in vitro biological properties of novel formulations of polymeric calcium phosphate cements (CPCs were investigated. Methods. Monocalcium phosphate, calcium oxide, and synthetic hydroxyapatite were combined with either modified polyacrylic acid, light activated polyalkenoic acid, or polymethyl vinyl ether maleic acid to obtain Types I, II, and III CPCs. Setting time, compressive and diametral strength of CPCs was compared with zinc polycarboxylate cement (control. Specimens were characterized using X-ray diffraction, scanning electron microscopy, and infrared spectroscopy. In vitro cytotoxicity of CPCs and control was assessed. Results. X-ray diffraction analysis showed hydroxyapatite, monetite, and brushite. Acid-base reaction was confirmed by the appearance of stretching peaks in IR spectra of set cements. SEM revealed rod-like crystals and platy crystals. Setting time of cements was 5–12 min. Type III showed significantly higher strength values compared to control. Type III yielded high biocompatibility. Conclusions. Type III CPCs show promise for dental applications.

  1. Photo-induced Polymerization and the Relaxation in Liquid Sulfur

    OpenAIRE

    坂口, 佳史; 田村, 剛三郎

    1994-01-01

    In order to study dynamical properties of the polymerization transition in liquid sulfur we have measured the transient absorption spectra after illuminating pulsed laser below and above the polymerization temperature, T_p. For the measurement we have developed a specially designed optical cell made of quartz. The thickness of liquid specimen contained in the cell was less than 1μm, which enabled us to measure the change of optical absorption spectra accompanying the polymerization. We have f...

  2. Radical polymerization in holographic grating formation in PQ-PMMA photopolymer part II: Consecutive exposure and dark decay

    Science.gov (United States)

    Yu, Dan; Liu, Hongpeng; Geng, Yaohui; Wang, Weibo; Zhao, Yuanyuan

    2014-11-01

    Photochemical radical polymerization in phenathrenequinone doped poly(methyl methacrylate) photopolymer are investigated theoretically and experimentally under consecutive exposure. The detailed photochemical mechanisms are analyzed. Based on the rate equations of photochemical reactions, the diffusion models with nonlocal response are proposed to describe the kinetic process of radical polymerization and the significance of photochemical processes for the grating formation. In experiments, the temporal evolution of diffraction efficiency in grating formation is measured under consecutive exposure and after exposure. The percentages of these radical polymerizations, namely the polymerization of PQ with matrix, the bimolecular combination of MMA molecules, and the disproportionation of MMA molecules, are extracted quantitatively by comparing theory with experiments. It is indicated that the polymerization of PQ with matrix is primary photochemical process which dominated the grating formation under consecutive exposure. In this period, the contribution of chain polymerization of MMA radicals is weak for the grating formation. After reaching the peak values of grating strength, the influence of the free MMA molecules and photoproduct macromolecules on the grating decay is discussed in a long-term period. The diffusion coefficients of MMA and photoproduct are extracted by fitting the curves using double exponential function. MMA’s diffusion contributed to the fast decay process of grating after exposure and photoproduct’s diffusion contributed to the slow and long decay of grating. The results break previous understanding about the diffusion of single photoproduct macromolecules lead to the dark decay of grating. This investigation can provide a significant foundation for improving modulation depth and long-term stability by photochemical mechanism.

  3. Online observation of emulsion polymerization by fluorescence technique

    CERN Document Server

    Rudschuck, S; Fuhrmann, J

    1999-01-01

    An online observation of local polarity via fluorescence spectroscopy was used to study the formation and growth of polymer particles during an emulsifier-free heterogeneous polymerization. The reaction mixture consisted of styrene dispersed in water and the polymerization was initiated by a macro-initiator (hydrolyzed propene-maleic acid copolymer with t-butyl perester groups). Pyrenyl probes were attached to the backbone of the initiator to analyze the heterogeneous reaction. The experimental results allow a clear distinction of different time regions during the heterogeneous polymerization. Information about the heating period, the latex formation, the particle growth and the final stage of the polymerization process (gel point) were obtained. (11 refs).

  4. Preparation of polymeric diacetylene thin films for nonlinear optical applications

    Science.gov (United States)

    Frazier, Donald O. (Inventor); Mcmanus, Samuel P. (Inventor); Paley, Mark S. (Inventor); Donovan, David N. (Inventor)

    1995-01-01

    A method for producing polymeric diacetylene thin films having desirable nonlinear optical characteristics has been achieved by producing amorphous diacetylene polymeric films by simultaneous polymerization of diacetylene monomers in solution and deposition of polymerized diacetylenes on to the surface of a transparent substrate through which ultraviolet light has been transmitted. These amorphous polydiacetylene films produced by photo-deposition from solution possess very high optical quality and exhibit large third order nonlinear optical susceptibilities, such properties being suitable for nonlinear optical devices such as waveguides and integrated optics.

  5. Polymeric materials for solar thermal applications

    CERN Document Server

    Köhl, Michael; Papillon, Philippe; Wallner, Gernot M; Saile, Sandrin

    2012-01-01

    Bridging the gap between basic science and technological applications, this is the first book devoted to polymers for solar thermal applications.Clearly divided into three major parts, the contributions are written by experts on solar thermal applications and polymer scientists alike. The first part explains the fundamentals of solar thermal energy especially for representatives of the plastics industry and researchers. Part two then goes on to provide introductory information on polymeric materials and processing for solar thermal experts. The third part combines both of these fields, dis

  6. Charpy Impact Test on Polymeric Molded Parts

    Directory of Open Access Journals (Sweden)

    Alexandra Raicu

    2012-09-01

    Full Text Available The paper presents the Charpy impact tests on the AcrylonitrileButadiene-Styrene (ABS polymeric material parts. The Charpy impact test, also known as the Charpy V-notch test, is a standardized strain rate test which determines the amount of energy absorbed by a material during fracture. This is a typical method described in ASTM Standard D 6110. We use for testing an Instron - Dynatup equipment which have a fully integrated hardware and software package that let us capture load information at very high speed from the impact tests.

  7. Fiberoptic microphone using a polymeric cavity

    Science.gov (United States)

    Wang, Wei-Chih; Soetanto, William; Gu, Kebin

    2011-04-01

    The fabrication and experimental investigation of a fiberoptic microphone is described. The sensing element is a silicon diaphragm with gold thin film coating that is positioned inside a silicone rubber mold at the end of a single mode optical fiber. Thus, a Fabry-Perot interferometer is formed between the inner fiber and the diaphragm. An acoustic pressure change is detected by using the developed microphone. The polymeric cavity and silicon diaphragm-based system exhibits excellent physicochemical properties with a small, simple, low cost, and lightweight design. The system is also electromagnetic interference / radio frequency interference immunity due to the use of fiberoptics.

  8. Diffusive transport in modern polymeric materials

    Energy Technology Data Exchange (ETDEWEB)

    Doering, C.; Bier, M.; Christodoulou, K. [and others

    1996-10-01

    This is the final report of a one-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). Polymers, composites, and synthetic modern materials are replacing traditional materials in many older scientific, engineering, commercial, and military applications. This project sought to focus on the new polymeric materials, deriving and analyzing models that predict their seemingly mysterious transport properties. It sought to identify the dominant physical mechanisms and the pertinent dimensionless parameters, produce viable theoretical models, and devise asymptotic and numerical methods for use in specific problems.

  9. Inflation and Instability of a Polymeric Membrane

    DEFF Research Database (Denmark)

    Neergaard, Jesper; Hassager, Ole

    1999-01-01

    We consider the inflation of an axisymmetric polymeric membrane. Some membranes composed of viscoelastic materials described by a Mooney-Rivlin model show a monotone increasingpressure during inflation. These materialsdevelop a homogeneous membrane thickness in agreement with the Considere......-Pearson condition.Molecularly based models such as the neo-Hookean, Doi-Edwards or Tom-Pom model exhibit a pressure maximum when inflated. Membranes described by these models develop local thinning which may lead to bursting in finite time. Chain branching is found to be a stabilizing factor for a polymer membrane...... undergoing inflation....

  10. Inflation and Failure of Polymeric Membranes

    DEFF Research Database (Denmark)

    Hassager, Ole; Neergaard, Jesper

    2000-01-01

    We consider the inflation of an axisymmetric polymeric membrane.Some membranes composed of viscoelastic materialsdescribed by a Mooney-Rivlin model show a monotone increasingpressure during inflation. These materialsdevelop a homogeneous membrane thickness in agreement with the Considere......-Pearson condition.Molecularly based models such as the neo-Hookean, Doi-Edwardsor Pom-Pom models, as well as the network model recently proposed byMarrucci, exhibit a pressure maximum when inflated. Membranesdescribed by these models develop local thinningwhich may lead to bursting in finite time.Chain branching...... is found to stabilize the inflated polymer membrane....

  11. Polymeric Microneedle Array Fabrication by Photolithography.

    Science.gov (United States)

    Kathuria, Himanshu; Kochhar, Jaspreet Singh; Fong, Michelle Hui Min; Hashimoto, Michinao; Iliescu, Ciprian; Yu, Hanry; Kang, Lifeng

    2015-11-17

    This manuscript describes the fabrication of polymeric microneedle (MN) arrays by photolithography. It involves a simple mold-free process by using a photomask consisting of embedded micro-lenses. Embedded micro-lenses were found to influence MN geometry (sharpness). Robust MN arrays with tip diameters ranging between 41.5 µm ± 8.4 µm and 71.6 µm ± 13.7 µm, with two different lengths (1,336 µm ± 193 µm and 957 µm ± 171 µm) were fabricated. These MN arrays may provide potential applications in delivery of low molecular and macromolecular therapeutic agents through skin.

  12. Modelling degradation of bioresorbable polymeric medical devices

    CERN Document Server

    Pan, J

    2015-01-01

    The use of bioresorbable polymers in stents, fixation devices and tissue engineering is revolutionising medicine. Both industry and academic researchers are interested in using computer modelling to replace some experiments which are costly and time consuming. This book provides readers with a comprehensive review of modelling polymers and polymeric medical devices as an alternative to practical experiments. Chapters in part one provide readers with an overview of the fundamentals of biodegradation. Part two looks at a wide range of degradation theories for bioresorbable polymers and devices.

  13. Durability of Polymeric Glazing and Absorber Materials

    Energy Technology Data Exchange (ETDEWEB)

    Jorgensen, G.; Terwilliger, K.; Bingham, C.; Lindquist, C.; Milbourne, M.

    2005-11-01

    The Solar Heating and Lighting Program has set the goal of reducing the cost of solar water heating systems by at least 50%. An attractive approach to such large cost reduction is to replace glass and metal parts with less-expensive, lighter-weight, more-integrated polymeric components. The key challenge with polymers is to maintain performance and assure requisite durability for extended lifetimes. We have begun evaluation of several new UV-screened polycarbonate sheet glazing constructions. This has involved interactions with several major polymer industry companies to obtain improved candidate samples. Proposed absorber materials were tested for UV resistance, and appear adequate for unglazed ICS absorbers.

  14. BIORESORBABLE POLYMERIC MENISCAL PROSTHESIS: STUDY IN RABBITS

    OpenAIRE

    Cardoso, Tulio Pereira; de Rezende Duek, Eliana Aparecida; Amatuzzi,Marco Martins; Caetano, Edie Benedito

    2010-01-01

    Objective: To induce growth of a neomeniscus into the pores of a prosthesis in order to protect the knee joint cartilage. Methods: 70 knees of 35 New Zealand rabbits were operated. The rabbits were five to seven months old, weighed 2 to 3.8 kilograms, and 22 were male and 13 were female. Each animal underwent medial meniscectomy in both knees during a single operation. A bioabsorbable polymeric meniscal prosthesis composed of 70% polydioxanone and 30% L-lactic acid polymer was implanted in on...

  15. Polymeric biomaterials structure and function, v.1

    CERN Document Server

    Dumitriu, Severian

    2013-01-01

    Biomaterials have had a major impact on the practice of contemporary medicine and patient care. Growing into a major interdisciplinary effort involving chemists, biologists, engineers, and physicians, biomaterials development has enabled the creation of high-quality devices, implants, and drug carriers with greater biocompatibility and biofunctionality. The fast-paced research and increasing interest in finding new and improved biocompatible or biodegradable polymers has provided a wealth of new information, transforming this edition of Polymeric Biomaterials into a two-volume set. This volume

  16. Polymerization of 1-Naphthylamine by DC discharge

    Science.gov (United States)

    Gilman, A.; Yablokov, M.; Augustyniak-Jablokov, M.; Tadyszak, K.; Kuznetsov, A.

    2012-12-01

    Thin polymer films from 1-naphthylamine have been obtained for the first time by polymerization at the cathode and anode in DC discharge. The morphology of the films synthesized at the cathode was examined by SEM and AFM. The elemental composition, chemical structure, and thermal stability of the polymer have been studied by pyrolysis chromatography, IR and UV spectroscopy, and thermogravimetry, respectively. The surface contact properties of the films and their thickness have been determined with a microinterferometer. Polymer was also investigated by ESR method.

  17. Novel hybrid polymeric materials for barrier coatings

    Science.gov (United States)

    Pavlacky, Erin Christine

    Polymer-clay nanocomposites, described as the inclusion of nanometer-sized layered silicates into polymeric materials, have been widely researched due to significant enhancements in material properties with the incorporation of small levels of filler (1--5 wt.%) compared to conventional micro- and macro-composites (20--30 wt.%). One of the most promising applications for polymer-clay nanocomposites is in the field of barrier coatings. The development of UV-curable polymer-clay nanocomposite barrier coatings was explored by employing a novel in situ preparation technique. Unsaturated polyesters were synthesized in the presence of organomodified clays by in situ intercalative polymerization to create highly dispersed clays in a precursor resin. The resulting clay-containing polyesters were crosslinked via UV-irradiation using donor-acceptor chemistry to create polymer-clay nanocomposites which exhibited significantly enhanced barrier properties compared to alternative clay dispersion techniques. The impact of the quaternary alkylammonium organic modifiers, used to increase compatibility between the inorganic clay and organic polymer, was studied to explore influence of the organic modifier structure on the nanocomposite material properties. By incorporating just the organic modifiers, no layered silicates, into the polyester resins, reductions in film mechanical and thermal properties were observed, a strong indicator of film plasticization. An alternative in situ preparation method was explored to further increase the dispersion of organomodified clay within the precursor polyester resins. In stark contrast to traditional in situ polymerization methods, a novel "reverse" in situ preparation method was developed, where unmodified montmorillonite clay was added during polyesterification to a reaction mixture containing the alkylammonium organic modifier. The resulting nanocomposite films exhibited reduced water vapor permeability and increased mechanical properties

  18. Development of Polymeric Coatings for Antifouling Applications

    Science.gov (United States)

    Toumayan, Edward Philip

    Fouling, or the deposition of unwanted material onto a surface, is a serious problem that can impair the function of submerged structures, such as marine-going vessels and underwater equipment. Water filtration membranes are particularly susceptible to fouling due to their microstructure and high water pressure operating conditions. For this reason, there has been considerable interest in developing fouling-resistant, or "antifouling" coatings for membranes, specifically coatings that mitigate fouling propensity while maintain high water flux. Polymer coatings have garnered significant interest in antifouling literature, due to their synthetic versatility and variety, and their promising resistance to a wide range of foulants. However, antifouling research has yet to establish a consistent framework for polymer coating synthesis and fouling evaluation, making it difficult or impossible to compare previously established methodologies. To this end, this work establishes a standardized methodology for synthesizing and evaluating polymer antifouling coatings. Specifically, antifouling coatings are synthesized using a grafting-from polymerization and fouling propensity is evaluated by quartz crystal microbalance with dissipation (QCM-D). Using this framework, a number of different surface functionalization strategies are compared, including grafting-to and grafting-from polymerization. A number of different surface functionalization strategies, including grafting-to and grafting-from, were investigated and the fouling performance of these films was evaluated. Primarily, sulfobetaine methacrylate, and poly(ethylene oxide) methacrylate monomers were investigated, among others. Grafting-to, while advantageous from a characterization standpoint, was ultimately limited to low grafting densities, which did not afford a significant improvement in fouling resistance. However, the higher grafting densities achievable by grafting-from did indicate improved fouling resistance. A

  19. Interfacial polymerization of conductive polymers: Generation of polymeric nanostructures in a 2-D space.

    Science.gov (United States)

    Dallas, Panagiotis; Georgakilas, Vasilios

    2015-10-01

    In the recent advances in the field of conductive polymers, the fibrillar or needle shaped nanostructures of polyaniline and polypyrrole have attracted significant attention due to the potential advantages of organic conductors that exhibit low-dimensionality, uniform size distribution, high crystallinity and improved physical properties compared to their bulk or spherically shaped counterparts. Carrying the polymerization reaction in a restricted two dimensional space, instead of the three dimensional space of the one phase solution is an efficient method for the synthesis of polymeric nanostructures with narrow size distribution and small diameter. Ultra-thin nanowires and nanofibers, single crystal nanoneedles, nanocomposites with noble metals or carbon nanotubes and layered materials can be efficiently synthesized with high yield and display superior performance in sensors and energy storage applications. In this critical review we will focus not only on the interfacial polymerization methods that leads to polymeric nanostructures and composites and their properties, but also on the mechanism and the physico-chemical processes that govern the diffusion and reactivity of molecules and nanomaterials at an interface. Recent advances for the synthesis of conductive polymer composites with an interfacial method for energy storage applications and future perspectives are presented. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Synthesis and characterization of novel reversible photoswitchable fluorescent polymeric nanoparticles via one-step miniemulsion polymerization.

    Science.gov (United States)

    Chen, Jian; Zhang, Peisheng; Fang, Gang; Yi, Pinggui; Yu, Xianyong; Li, Xiaofang; Zeng, Fang; Wu, Shuizhu

    2011-04-07

    In the present study, novel polymeric nanoparticles of ca. 55 nm in diameter with reversibly photoswitchable fluorescence properties were synthesized using a facile one-step miniemulsion polymerization, in which the donor of fluorescence resonance energy transfer (FRET), 4-methamino-9-allyl-1,8-naphthalimide (MANI), and the acceptor, spiropyran-linked methacrylate (SPMA), were covalently incorporated into a polymeric matrix during the polymerization process. The fluorescence emission of MANI dye in nanoparticles can be reversibly switched using the alternating irradiation of UV and visible light, which can induce the structural interconversion between the SP form and MC form of spiropyran moieties inside nanoparticles and thus reversibly switch on and switch off the FRET process. The prepared photoswitchable fluorescent polymer nanoparticles not only show a high load capacity of dyes, controllable amount and ratio of the two dyes, and tunable FRET efficiency but also exhibit higher spectral stability because of covalent linkage between dye molecules and the particle, relatively fast photoresponsibility, and better photoreversibility compared to some previously reported systems.

  1. Sorption of ferrous and ferric iron by extracellular polymeric substances (EPS) from acidophilic bacteria.

    Science.gov (United States)

    Tapia, Jaime M; Muñoz, Jesús; González, Felisa; Blázquez, Maria L; Ballester, Antonio

    2013-01-01

    The sorption of Fe(II) and Fe(III) by extracellular polymeric substances (EPS) of acidophilic bacteria Acidiphilium 3.2Sup(5) and Acidithiobacillus ferrooxidans, harvested from the ecosystem of the Tinto River (Huelva, Spain), was investigated. EPS from mixed cultures of both bacteria (EPS(mixed)) and pure cultures of A. 3.2Sup(5) (EPS(pure)) were extracted with ethylenediamine tetraacetic acid (EDTA) and were characterized by Fourier-transform infrared (FTIR), electron photoemission (XPS), x-ray diffraction (DRX), and energy dispersive x-ray (EDX) spectroscopy and scanning electron microscopy (SEM). EPS pure were loaded, in sorption tests, with Fe(II) and Fe(III). The results obtained indicate that the biochemical composition and structure of EPS(mixed) was very similar to that of EPS(pure). Besides, results indicate that EPS(mixed) adsorbed Fe(II) and Fe(III) by preferential interaction with the carboxyl group, which favored the formation of Fe(II)/Fe(III) oxalates. These species were also formed in EPS(pure) loaded with Fe(II)/Fe(III). All this behavior suggested that the sorption of iron by EPS(mixed) was similar to sorption of EPS(pure), which fitted the Freundlich model. Thus, the iron uptake of EPS(mixed) reached 516.7 ± 23.4 mg Fe/g-EPS at an initial concentration of 2.0 g/L of Fe(total) and Fe(II)/Fe(III) ratio of 1.0.

  2. Animal evolution

    DEFF Research Database (Denmark)

    Nielsen, Claus

    This book provides a comprehensive analysis of evolution in the animal kingdom. It reviews the classical, morphological information from structure and embryology, as well as the new data gained from studies using immune stainings of nerves and muscles and blastomere markings, which makes it possi......This book provides a comprehensive analysis of evolution in the animal kingdom. It reviews the classical, morphological information from structure and embryology, as well as the new data gained from studies using immune stainings of nerves and muscles and blastomere markings, which makes...

  3. Neodymium(III) Complexes of Dialkylphosphoric and Dialkylphosphonic Acids Relevant to Liquid-Liquid Extraction Systems

    Energy Technology Data Exchange (ETDEWEB)

    Lumetta, Gregg J.; Sinkov, Sergey I.; Krause, Jeanette A.; Sweet, Lucas E.

    2016-01-27

    The complexes formed during the extraction of neodymium(III) into hydrophobic solvents containing acidic organophosphorus extractants were probed by single-crystal X-ray diffractometry, visible spectrophotometry, and Fourier-transform infrared spectroscopy. The crystal structure of the compound Nd(DMP)3 (1, DMP = dimethyl phosphate) revealed a polymeric arrangement in which each Nd(III) center is surrounded by six DMP oxygen atoms in a pseudo-octahedral environment. Adjacent Nd(III) ions are bridged by (MeO)2POO– anions, forming the polymeric network. The diffuse reflectance visible spectrum of 1 is nearly identical to that of the solid that is formed when an n-dodecane solution of di-(2-ethylhexyl)phosphoric acid (HA) is saturated with Nd(III), indicating a similar coordination environment around the Nd center in the NdA3 solid. The visible spectrum of the HA solution fully loaded with Nd(III) is very similar to that of the NdA3 material, both displaying hypersensitive bands characteristic of an pseudo-octahedral coordination environment around Nd. These spectral characteristics persisted across a wide range of organic Nd concentrations, suggesting that the pseudo-octahedral coordination environment is maintained from dilute to saturated conditions.

  4. Electrostatic Interactions between Elongated Monomers Drive Filamentation of Drosophila Shrub, a Metazoan ESCRT-III Protein

    Directory of Open Access Journals (Sweden)

    Brian J. McMillan

    2016-08-01

    Full Text Available The endosomal sorting complex required for transport (ESCRT is a conserved protein complex that facilitates budding and fission of membranes. It executes a key step in many cellular events, including cytokinesis and multi-vesicular body formation. The ESCRT-III protein Shrub in flies, or its homologs in yeast (Snf7 or humans (CHMP4B, is a critical polymerizing component of ESCRT-III needed to effect membrane fission. We report the structural basis for polymerization of Shrub and define a minimal region required for filament formation. The X-ray structure of the Shrub core shows that individual monomers in the lattice interact in a staggered arrangement using complementary electrostatic surfaces. Mutations that disrupt interface salt bridges interfere with Shrub polymerization and function. Despite substantial sequence divergence and differences in packing interactions, the arrangement of Shrub subunits in the polymer resembles that of Snf7 and other family homologs, suggesting that this intermolecular packing mechanism is shared among ESCRT-III proteins.

  5. Impact of Carbon Nanomaterials on Actin Polymerization.

    Science.gov (United States)

    Dong, Ying; Sun, Haiyan; Li, Xu; Li, Xin; Zhao, Lina

    2016-03-01

    Many nanomaterials have entered people's daily lives and impact the normal process of biological entities consequently. As one kind of the important nanomaterials, carbon based nanomaterials have invoked a lot of concerns from scientific researches because of their unique physicochemical properties. In eukaryotes, actin is the most abundantly distributed protein in both cytoplasm and cell nucleus, and closely controls the cell proliferation and mobility. Recently, many investigations have found some carbon based nanomaterials can affect actin cytoskeleton remarkably, including fullerenes derivatives, carbon nanotubes, graphene and its derivatives. However, these interaction processes are complicated and the underlying mechanism is far from being understood clearly. In this review, we discussed the different mechanisms of carbon nanomaterials impact on actin polymerization into three pathways, as triggering the signaling pathways from carbon nanomaterials outside of cells, increasing the production of reactive oxygen species from carbon nanomaterials inside of cells and direct interaction from carbon nanomaterials inside of cells. As a result, the dimension and size of carbon nanomaterials play a key role in regulation of actin cytoskeleton. Furthermore, we forecasted the possible investigation strategy for meeting the challenges of the future study on this topic. We hope the findings are helpful in understanding the molecular mechanism in carbon nanomaterials regulating actin polymerization, and provide new insight in novel nanomedicine development for inhibition tumor cell migration.

  6. Sorption of small molecules in polymeric media

    Science.gov (United States)

    Camboni, Federico; Sokolov, Igor M.

    2016-12-01

    We discuss the sorption of penetrant molecules from the gas phase by a polymeric medium within a model which is very close in spirit to the dual sorption mode model: the penetrant molecules are partly dissolved within the polymeric matrix, partly fill the preexisting voids. The only difference with the initial dual sorption mode situation is the assumption that the two populations of molecules are in equilibrium with each other. Applying basic thermodynamics principles we obtain the dependence of the penetrant concentration on the pressure in the gas phase and find that this is expressed via the Lambert W-function, a different functional form than the one proposed by dual sorption mode model. The Lambert-like isotherms appear universally at low and moderate pressures and originate from the assumption that the internal energy in a polymer-penetrant-void ternary mixture is (in the lowest order) a bilinear form in the concentrations of the three components. Fitting the existing data shows that in the domain of parameters where the dual sorption mode model is typically applied, the Lambert function, which describes the same behavior as the one proposed by the gas-polymer matrix model, fits the data equally well.

  7. Capillary wrinkling of thin bilayer polymeric sheets

    Science.gov (United States)

    Chang, Jooyoung; Menon, Narayanan; Russell, Thomas

    We have investigated capillary force induced wrinkling on a floated polymeric bilayer thin sheet. The origin of the wrinkle pattern is compressional hoop stress caused by the capillary force of a water droplet placed on the floated polymeric thin sheet afore investigated. Herein, we study the effect of the differences of surface energy arising from the hydrophobicity of Polystyrene (PS Mw: 97 K, Contact Angle: 88 º) and the hydrophilicity of Poly(methylmethacrylate) (PMMA Mw: 99K, Contact Angle: 68 º) on two sides of a bilayer film. We measure the number and the length of the wrinkles by broadly varying the range of thicknesses of top (9 nm to 550 nm) and bottom layer (25 nm to 330 nm). At the same, there is only a small contrast in mechanical properties of the two layers (PS E = 3.4 GPa, and PMMA E = 3 GPa). The number of the wrinkles is not strongly affected by the composition (PS(Top)/PMMA(Bottom) or PMMA(Top)/PS(Bottom)) and the thickness of each and overall bilayer system. However, the length of the wrinkle is governed by the contact angle of the drop on the top layer of bilayer system. We also compare this to the wrinkle pattern obtained in monolayer systems over a wide range of thickness from PS and PMMA (7 nm to 1 μm). W.M. Keck Foundation.

  8. Protein encapsulation in polymeric microneedles by photolithography.

    Science.gov (United States)

    Kochhar, Jaspreet Singh; Zou, Shui; Chan, Sui Yung; Kang, Lifeng

    2012-01-01

    Recent interest in biocompatible polymeric microneedles for the delivery of biomolecules has propelled considerable interest in fabrication of microneedles. It is important that the fabrication process is feasible for drug encapsulation and compatible with the stability of the drug in question. Moreover, drug encapsulation may offer the advantage of higher drug loading compared with other technologies, such as drug coating. In this study, we encapsulated a model protein drug, namely, bovine serum albumin, in polymeric microneedles by photolithography. Drug distribution within the microneedle array was found to be uniform. The encapsulated protein retained its primary, secondary, and tertiary structural characteristics. In vitro release of the encapsulated protein showed that almost all of the drug was released into phosphate buffered saline within 6 hours. The in vitro permeation profile of encapsulated bovine serum albumin through rat skin was also tested and shown to resemble the in vitro release profile, with an initial release burst followed by a slow release phase. The cytotoxicity of the microneedles without bovine serum albumin was tested in three different cell lines. High cell viabilities were observed, demonstrating the innocuous nature of the microneedles. The microneedle array can potentially serve as a useful drug carrier for proteins, peptides, and vaccines.

  9. Polymeric Slippery Coatings: Nature and Applications

    Directory of Open Access Journals (Sweden)

    Mohamed A. Samaha

    2014-04-01

    Full Text Available We review recent developments in nature-inspired superhydrophobic and omniphobic surfaces. Water droplets beading on a surface at significantly high static contact angles and low contact-angle hystereses characterize superhydrophobicity. Microscopically, rough hydrophobic surfaces could entrap air in their pores resulting in a portion of a submerged surface with air–water interface, which is responsible for the slip effect. Suberhydrophobicity enhances the mobility of droplets on lotus leaves for self-cleaning purposes, so-called lotus effect. Amongst other applications, superhydrophobicity could be used to design slippery surfaces with minimal skin-friction drag for energy conservation. Another kind of slippery coatings is the recently invented slippery liquid-infused porous surfaces (SLIPS, which are one type of omniphobic surfaces. Certain plants such as the carnivorous Nepenthes pitcher inspired SLIPS. Their interior surfaces have microstructural roughness, which can lock in place an infused lubricating liquid. The lubricant is then utilized as a repellent surface for other liquids such as water, blood, crude oil, and alcohol. In this review, we discuss the concepts of both lotus effect and Nepenthes slippery mechanism. We then present a review of recent advances in manufacturing polymeric and non-polymeric slippery surfaces with ordered and disordered micro/nanostructures. Furthermore, we discuss the performance and longevity of such surfaces. Techniques used to characterize the surfaces are also detailed. We conclude the article with an overview of the latest advances in characterizing and using slippery surfaces for different applications.

  10. Catalytic systems used for polymerization, biomass conversion, and enhancing diffusion

    Science.gov (United States)

    Pong, Frances

    A significant amount of research has been dedicated towards the study and improvement of catalysts. A better understanding of how catalysts work can lead to developing more cost-efficient catalytic systems for a variety of applications. My research is focuses on catalytic systems used in three different fields, which are (i) organometallic polymerization catalysts, (ii) molecular motors and (iii) biomass conversion. Researchers have long studied and modified organometallic catalysts for use in the direct co- and homopolymerization of monomers with polar functional groups. The ability to add polar moieties to polymers, which can potentially yield materials with a wider range of physical properties, is highly desirable. In this study (i), a series of naphthoxyimine palladium(II) catalysts -- in which the naphthyl backbone had been functionalized with different moieties -- were synthesized and systematically studied to determine the ligand structure's impact on catalytic activity. The study showed that slight modifications of the naphthyl backbone led to significant changes in the polymer's molecular weight and polydispersity index. The catalysts were also displayed some ability to co-polymerize ethylene and functionalized norbornene. These positive results suggest that further exploration of naphthoxyimine palladium (II) catalysts may be fundamentally interesting. The effect of active, motile particles at the nanoscale has been vigorously researched during the past decade. By understanding how such active suspensions behave, researchers can gain new insights which can potentially provide new applications in many fields. Here (ii) the momentum transfer of active catalysts (Grubbs' 2nd generation catalyst with a hydrodynamic radius of 6A) to their immediate surroundings is observed in an organic suspension. This phenomenon, which has been coined "enhanced diffusion," has not been well studied at the angstrom scale until now. Diffusion-NMR spectroscopy surprisingly

  11. Representing Evolution

    DEFF Research Database (Denmark)

    Hedin, Gry

    2012-01-01

    . This article discusses Willumsen's etching in the context of evolutionary theory, arguing that Willumsen is a rare example of an artist who not only let the theory of evolution fuel his artistic imagination, but also concerned himself with a core issue of the theory, namely to what extent it could be applied...

  12. Accepting evolution.

    Science.gov (United States)

    Chinsamy, Anusuya; Plagányi, Eva

    2008-01-01

    Poor public perceptions and understanding of evolution are not unique to the developed and more industrialized nations of the world. International resistance to the science of evolutionary biology appears to be driven by both proponents of intelligent design and perceived incompatibilities between evolution and a diversity of religious faiths. We assessed the success of a first-year evolution course at the University of Cape Town and discovered no statistically significant change in the views of students before the evolution course and thereafter, for questions that challenged religious ideologies about creation, biodiversity, and intelligent design. Given that students only appreciably changed their views when presented with "facts," we suggest that teaching approaches that focus on providing examples of experimental evolutionary studies, and a strong emphasis on the scientific method of inquiry, are likely to achieve greater success. This study also reiterates the importance of engaging with students' prior conceptions, and makes suggestions for improving an understanding and appreciation of evolutionary biology in countries such as South Africa with an inadequate secondary science education system, and a dire lack of public engagement with issues in science.

  13. Greening Evolution

    African Journals Online (AJOL)

    Administrator

    African Journal of Environmental Science and Technology Vol. ... Greening Evolution. The second week in July marks the occasion of an extraordinary conference entitled "Future Trends in Genetics and. Biotechnology for Safe Environment," sponsored by the ... For example, the information presented in Figure 2 shows.

  14. Preparation and characterization of Fe(III)-loaded iminodiacetic acid modified GMA grafted nonwoven fabric adsorbent for anion adsorption

    Science.gov (United States)

    Kavaklı, Pınar Akkaş; Kavaklı, Cengiz; Güven, Olgun

    2014-01-01

    An Fe(III)-loaded chelating fabric with iminodiacetic acid (IDA) functional groups was prepared by radiation induced graft polymerization of an epoxy group containing monomer, glycidyl methacrylate, onto a nonwoven fabric made of polypropylene coated by polyethylene (PE/PP) and subsequent Fe(III) loading. Grafting conditions were optimized, and GMA grafted polymer was modified with iminodiacetic acid in isopropyl alcohol/water at 80 °C. In order to prepare the polymeric ligand exchanger (PLE) for the removal of phosphate, IDA fabrics were loaded with Fe(III) ions. Fe(III) loading capacity of IDA fabric was determined to be 2.83 mmol Fe(III)/g of polymer. For removal of phosphate anion, adsorption experiments were performed in batch mode at different pH (2-9) and phosphate concentrations. It was found that phosphate adsorption by the Fe(III)-loaded IDA fabric is maximum at pH 2.00. The effect of initial concentration of phosphate on the adsorption behaviour of Fe(III)-loaded IDA nonwoven fabric was determined at low phosphate concentrations (0.5-25 ppm) and at high phosphate concentrations (50-1000 ppm).

  15. Chemical Evolution and the Evolutionary Definition of Life.

    Science.gov (United States)

    Higgs, Paul G

    2017-06-01

    Darwinian evolution requires a mechanism for generation of diversity in a population, and selective differences between individuals that influence reproduction. In biology, diversity is generated by mutations and selective differences arise because of the encoded functions of the sequences (e.g., ribozymes or proteins). Here, I draw attention to a process that I will call chemical evolution, in which the diversity is generated by random chemical synthesis instead of (or in addition to) mutation, and selection acts on physicochemical properties, such as hydrolysis, photolysis, solubility, or surface binding. Chemical evolution applies to short oligonucleotides that can be generated by random polymerization, as well as by template-directed replication, and which may be too short to encode a specific function. Chemical evolution is an important stage on the pathway to life, between the stage of "just chemistry" and the stage of full biological evolution. A mathematical model is presented here that illustrates the differences between these three stages. Chemical evolution leads to much larger differences in molecular concentrations than can be achieved by selection without replication. However, chemical evolution is not open-ended, unlike biological evolution. The ability to undergo Darwinian evolution is often considered to be a defining feature of life. Here, I argue that chemical evolution, although Darwinian, does not quite constitute life, and that a good place to put the conceptual boundary between non-life and life is between chemical and biological evolution.

  16. Vinylimidazole-Based Asymmetric Ion Pair Comonomers: Synthesis, Polymerization Studies and Formation of Ionically Crosslinked PMMA

    NARCIS (Netherlands)

    Jana, S.; Vasantha, V.A.; Stubbs, L.P.; Parthiban, A.; Vancso, Gyula J.

    2013-01-01

    Vinylimidazole-based asymmetric ion pair comonomers (IPCs) which are free from nonpolymerizable counter ions have been synthesized, characterized and polymerized by free radical polymerization (FRP), atom transfer radical polymerization (ATRP), and reversible addition-fragmentation chain transfer

  17. Polymerization Simulator for Introductory Polymer and Material Science Courses

    Science.gov (United States)

    Chirdon, William M.

    2010-01-01

    This work describes how molecular simulation of polymerization reactions can be used to enrich introductory polymer or material science courses to give students a deeper understanding of free-radical chain and stepwise growth polymerization reactions. These simulations have proven to be effective media for instruction that do not require material…

  18. Structural Analysis of Ciprofloxacin-Carbopol Polymeric Composites ...

    African Journals Online (AJOL)

    FTIR analysis indicates that there were intermolecular hydrogen bonding and esterification between the drug and polymer in the polymeric composites. Conclusion: The changes that occurred in ciprofloxacin indicate increase in stability, decrease in solubility and delayed release of the drug from polymeric composites ...

  19. Propene bulk polymerization kinetics: Role of prepolymerization and hydrogen

    NARCIS (Netherlands)

    Pater, J.T.M.; Weickert, G.; van Swaaij, Willibrordus Petrus Maria

    2003-01-01

    An experimental setup for the polymerization of liquid propylene was used to carry out main polymerizations with and without a prepolymerization step. Two types of prepolymerization are introduced: at a constant temperature and at rapidly increasing reactor temperatures. With the present catalyst

  20. Radiation and thermal polymerization of allyl(p-allylcarbonate) benzoate

    Energy Technology Data Exchange (ETDEWEB)

    Lopez-V, D., E-mail: dlopez@siu.buap.m [Facultad de Ciencias Quimicas, Benemerita Universidad Autonoma de Puebla, Antiguo Edificio de la Fac. de Cs., Quimica. Av. San Claudio y Boulevard de la 14 sur, Col. San Manuel, Puebla, Pue., CP 72500 (Mexico); Herrera-G, A.M., E-mail: mherrera@uaeh.reduaeh.m [Centro de Inv. en Materiales y Metalurgia, UAEH. Km 4.5, C.U., CP 42184, Pachuca de S. Hidalgo (Mexico); Castillo-Rojas, S., E-mail: castillo@nucleares.unam.m [Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, Circuito Exterior, Ciudad Universitaria, 04510 DF (Mexico)

    2011-03-15

    Bulk polymerization of novel allyl(p-allylcarbonate) benzoate was investigated using different sources of energy, such as gamma rays, ultraviolet rays as well as thermal polymerization. The poly(allyl(p-allylcarbonate) benzoate) obtained is a cross-linking, transparent, thermoset polycarbonate. Compositions of the monomer and the polycarbonate were analyzed by infrared spectroscopy, elemental analysis, and {sup 1}H NMR spectroscopy.

  1. Characterization of Plasma-Polymerized Allylamine Using Waveguide Mode Spectroscopy

    NARCIS (Netherlands)

    van Os, M.T.; Menges, B.; Foerch, R.; Vancso, Gyula J.; Knoll, W.

    1999-01-01

    Amine-functionalized thin films were prepared by plasma-induced deposition of allylamine. Radio frequency (rf) plasma polymerization was carried out under both continuous wave (CW) and pulsed conditions to control the film chemistry. The chemical and physical nature of plasma-polymerized allylamine

  2. Macromolecular Architectures Designed by Living Radical Polymerization with Organic Catalysts

    Directory of Open Access Journals (Sweden)

    Miho Tanishima

    2014-01-01

    Full Text Available Well-defined diblock and triblock copolymers, star polymers, and concentrated polymer brushes on solid surfaces were prepared using living radical polymerization with organic catalysts. Polymerizations of methyl methacrylate, butyl acrylate, and selected functional methacrylates were performed with a monofunctional initiator, a difunctional initiator, a trifunctional initiator, and a surface-immobilized initiator.

  3. Pressure induced graft-co-polymerization of acrylonitrile onto ...

    Indian Academy of Sciences (India)

    WINTEC

    sent communication, we report for the first time the graft co-polymerization of S. cilliare fibre under pressure. The advantage of pressure induced grafting has ..... disorder in the crystalline pattern of the main polymeric backbone by the grafted units of the polyacrylonitrile chains. 4. Conclusions. It has been found that upon ...

  4. Triblock Terpolymers by Simultaneous Tandem Block Polymerization (STBP).

    Science.gov (United States)

    Freudensprung, Ines; Klapper, Markus; Müllen, Klaus

    2016-02-01

    A route of synthesizing triblock terpolymers in a one-pot, "one-step" polymerization approach is presented. The combination of two distinct polymerization techniques through orthogonal catalyst/initiator functionalities attached to a polymeric linker furnishes novel pathways to ABC-terpolymers. Both polymerizations have to be compatible regarding mechanisms, chosen monomers, and solvents. Here, an α,ω-heterobifunctional poly(ethylene glycol) serves as poly-meric catalyst/initiator to obtain triblock terpolymers of poly(norbornene)-b-poly(ethylene glycol)-b-poly(L-lactic acid) PNB-PEG-PLLA via simultaneous ring opening metathesis poly-merization and ring opening polymerization in a fast one-pot polymerization. Structural characterization of the polymers is provided via (1)H-, DOSY-, and (1)H,(1)H-COSY-NMR, while solution and thin film self-assembly are investigated by dynamic light scattering and atomic force microscopy. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Low rate propylene slurry polymerization: kinetics and morphology

    NARCIS (Netherlands)

    Pimplapure, M.S.; Zheng, Xuejing; Weickert, G.; Loos, Joachim

    2006-01-01

    'True' initial polymerization rates can be calculated from the adiabatic temperature rise under isoperibolic conditions. They are much higher than initial polymerization rates measured by standard mass flow meter methods under quasi-steady-state conditions. These high initial rates are followed by a

  6. Reducing the gel effect in free radical polymerization

    NARCIS (Netherlands)

    Janssen, L.P.B.M.; Hoffmann, A.C.; Cioffi, M.

    The gel effect is a phenomenon that often takes place during a free radical polymerization at intermediate or high degrees of conversion. It consists of the autoacceleration of the rate of the polymerization and it is due to diffusion limitations that slow down the termination reaction leaving the

  7. CoCl2 reinforced polymeric nanocomposites of conjugated polymer ...

    Indian Academy of Sciences (India)

    Administrator

    ence (EMI) shielding, rechargeable batteries, chemical, biological and gas sensors, anti-corrosion protection coat- ings and microwave absorption.1–7 These polymeric mate- rials have low charge carrier mobility as well.8–13 Among these polymeric materials, polyaniline (PANI) is recog- nized as one of the most commonly ...

  8. CoCl2 reinforced polymeric nanocomposites of conjugated polymer ...

    Indian Academy of Sciences (India)

    Polyaniline (PANI) was synthesized by chemical oxidative polymerization of aniline using ammonium persulphate as an oxidant in acidic aqueous medium. Cobalt chloride hexahydrate (CoCl2⋅6H2O)-doped PANI composite was synthesized by in-situ oxidative polymerization process by using various concentrations of ...

  9. Anisotropic microporous supports impregnated with polymeric ion-exchange materials

    Science.gov (United States)

    Friesen, Dwayne; Babcock, Walter C.; Tuttle, Mark

    1985-05-07

    Novel ion-exchange media are disclosed, the media comprising polymeric anisotropic microporous supports containing polymeric ion-exchange or ion-complexing materials. The supports are anisotropic, having small exterior pores and larger interior pores, and are preferably in the form of beads, fibers and sheets.

  10. Modeling and Analytical Simulation of Anterior Polymerization in the ...

    African Journals Online (AJOL)

    ADOWIE PERE

    special applications. Our lives have been thoroughly changed with the advent of mobile phones, ... polymers and polymeric networks in a rapid fashion is frontal polymerization (FP). Frontal .... where I is the concentration of the initiator, M is the monomer concentration, t is the time, d k and e k are the decomposition and the ...

  11. Cryptosporidium parvum Infection Requires Host Cell Actin Polymerization

    OpenAIRE

    Elliott, David A.; Coleman, Daniel J.; Lane, Michael A.; May, Robin C.; Machesky, Laura M.; Clark, Douglas P.

    2001-01-01

    The intracellular protozoan parasite Cryptosporidium parvum accumulates host cell actin at the interface between the parasite and the host cell cytoplasm. Here we show that the actin polymerizing proteins Arp2/3, vasodilator-stimulated phosphoprotein (VASP), and neural Wiskott Aldrich syndrome protein (N-WASP) are present at this interface and that host cell actin polymerization is necessary for parasite infection.

  12. Cryptosporidium parvum infection requires host cell actin polymerization.

    Science.gov (United States)

    Elliott, D A; Coleman, D J; Lane, M A; May, R C; Machesky, L M; Clark, D P

    2001-09-01

    The intracellular protozoan parasite Cryptosporidium parvum accumulates host cell actin at the interface between the parasite and the host cell cytoplasm. Here we show that the actin polymerizing proteins Arp2/3, vasodilator-stimulated phosphoprotein (VASP), and neural Wiskott Aldrich syndrome protein (N-WASP) are present at this interface and that host cell actin polymerization is necessary for parasite infection.

  13. Controlled free radical polymerization of vinyl acetate with cobalt ...

    Indian Academy of Sciences (India)

    The polymerization of vinyl acetate with the complex catalyst of cobalt acetoacetonate [Co (acac)2] and DMF ligand with benzoyl peroxide initiator has been successfully carried out in bulk and in solution. The bulk polymerization has been used in a new route consisting of a one-step polymer formation in a fine capillary tube ...

  14. Versatile Tandem Ring-Opening/Ring-Closing Metathesis Polymerization: Strategies for Successful Polymerization of Challenging Monomers and Their Mechanistic Studies.

    Science.gov (United States)

    Park, Hyeon; Kang, Eun-Hye; Müller, Laura; Choi, Tae-Lim

    2016-02-24

    Tandem ring-opening/ring-closing metathesis (RO/RCM) results in extremely fast living polymerization; however, according to previous reports, only monomers containing certain combinations of cycloalkenes, terminal alkynes, and nitrogen linkers successfully underwent tandem polymerization. After examining the polymerization pathways, we proposed that the relatively slow intramolecular cyclization might lead to competing side reactions such as intermolecular cross metathesis reactions to form inactive propagating species. Thus, we developed two strategies to enhance tandem polymerization efficiency. First, we modified monomer structures to accelerate tandem RO/RCM cyclization by enhancing the Thorpe-Ingold effect. This strategy increased the polymerization rate and suppressed the chain transfer reaction to achieve controlled polymerization, even for challenging syntheses of dendronized polymers. Alternatively, reducing the reaction concentration facilitated tandem polymerization, suggesting that the slow tandem RO/RCM cyclization step was the main reason for the previous failure. To broaden the monomer scope, we used monomers containing internal alkynes and observed that two different polymer units with different ring sizes were produced as a result of nonselective α-addition and β-addition on the internal alkynes. Thorough experiments with various monomers with internal alkynes suggested that steric and electronic effects of the alkyne substituents influenced alkyne addition selectivity and the polymerization reactivity. Further polymerization kinetics studies revealed that the rate-determining step of monomers containing certain internal alkynes was the six-membered cyclization step via β-addition, whereas that for other monomers was the conventional intermolecular propagation step, as observed in other chain-growth polymerizations. This conclusion agrees well with all those polymerization results and thus validates our strategies.

  15. Oxymatrinium tetrachloridoferrate(III

    Directory of Open Access Journals (Sweden)

    Xiong He

    2012-02-01

    Full Text Available The asymmetric unit of the title compound, (C15H25N2O2[FeCl4], contains a tetrachloridoferrate(III anion and a oxymatrinium cation [oxymatrine is (4R,7aS,13aR,13bR,13cS-dodecahydro-1H,5H,10H-dipyrido[2,1-f:3′,2′,1′-ij][1,6]naphthyridin-10-one 4-oxide]. The conformation of oxymatrine is similar to that of matrine with one ring having a half-chair conformation, while the others have chair conformations. Chiral chains of cations along the c axis are formed by O—H...O hydrogen bonds.

  16. Ammonium diphosphitoindate(III

    Directory of Open Access Journals (Sweden)

    Farida Hamchaoui

    2013-04-01

    Full Text Available The crystal structure of the title compound, NH4[In(HPO32], is built up from InIII cations (site symmetry 3m. adopting an octahedral environment and two different phosphite anions (each with site symmetry 3m. exhibiting a triangular–pyramidal geometry. Each InO6 octahedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO32]− layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO32]− layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4+ cations and the O atoms of the framework.

  17. LACCASE Is Necessary and Nonredundant with PEROXIDASE for Lignin Polymerization during Vascular Development in Arabidopsis[C][W

    Science.gov (United States)

    Zhao, Qiao; Nakashima, Jin; Chen, Fang; Yin, Yanbin; Fu, Chunxiang; Yun, Jianfei; Shao, Hui; Wang, Xiaoqiang; Wang, Zeng-Yu; Dixon, Richard A.

    2013-01-01

    The evolution of lignin biosynthesis was critical in the transition of plants from an aquatic to an upright terrestrial lifestyle. Lignin is assembled by oxidative polymerization of two major monomers, coniferyl alcohol and sinapyl alcohol. Although two recently discovered laccases, LAC4 and LAC17, have been shown to play a role in lignin polymerization in Arabidopsis thaliana, disruption of both genes only leads to a relatively small change in lignin content and only under continuous illumination. Simultaneous disruption of LAC11 along with LAC4 and LAC17 causes severe plant growth arrest, narrower root diameter, indehiscent anthers, and vascular development arrest with lack of lignification. Genome-wide transcript analysis revealed that all the putative lignin peroxidase genes are expressed at normal levels or even higher in the laccase triple mutant, suggesting that lignin laccase activity is necessary and nonredundant with peroxidase activity for monolignol polymerization during plant vascular development. Interestingly, even though lignin deposition in roots is almost completely abolished in the lac11 lac4 lac17 triple mutant, the Casparian strip, which is lignified through the activity of peroxidase, is still functional. Phylogenetic analysis revealed that lignin laccase genes have no orthologs in lower plant species, suggesting that the monolignol laccase genes diverged after the evolution of seed plants. PMID:24143805

  18. Fabrication and manipulation of polymeric magnetic particles with magnetorheological fluid

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez-Lopez, Jaime [Centro de Acustica Aplicada y Evaluacion No Destructivos (CAEND), CSIC-UPM, C/Serrano 144, 28006, Madrid (Spain); Shum, Ho Cheung, E-mail: ashum@hku.hk [Department of Mechanical Engineering, University of Hong Kong, 7/F Haking Wong Building, Pokfulam Road (Hong Kong); Elvira, Luis; Montero de Espinosa, Francisco [Centro de Acustica Aplicada y Evaluacion No Destructivos (CAEND), CSIC-UPM, C/Serrano 144, 28006, Madrid (Spain); Weitz, David A., E-mail: weitz@seas.harvard.edu [Department of Physics and School of Engineering and Applied Sciences, Harvard University, 9 and 15 Oxford Street, Cambridge, MA 02138 (United States)

    2013-01-15

    Polymeric magnetic microparticles have been created using a microfluidic device via ultraviolet (UV) polymerization of double emulsions, resulting in cores of magnetorheological (MR) fluids surrounded by polymeric shells. We demonstrate that the resultant particles can be manipulated magnetically to achieve triggered rupture of the capsules. This illustrates the great potential of our capsules for triggered release of active ingredients encapsulated in the polymeric magnetic microparticles. - Highlights: Black-Right-Pointing-Pointer Polymeric microparticles encapsulating MR fluids have been fabricated. Black-Right-Pointing-Pointer A double-emulsion-templated approach using microfluidic techniques has been used. Black-Right-Pointing-Pointer The monodisperse microparticles obtained are easily manipulated under magnetic field. Black-Right-Pointing-Pointer These microparticles have great potential for encapsulation-and-release applications.

  19. Modelling the Load Torques of Electric Drive for Polymerization Process

    Directory of Open Access Journals (Sweden)

    Andrzej Popenda

    2007-01-01

    Full Text Available The problems of mathematical modelling the load torques on shaft of driving motor designed for applications in polymerization reactors are presented in the paper. The real load of polymerization drive is determined as a function of angular velocity. Mentioned function results from friction in roll-formed slide bearing as well as from friction of ethylene molecules with mixer arms in polymerization reactor chamber. Application of mathematical formulas concerning the centrifugal ventilator is proposed to describe the mixer in reactor chamber. The analytical formulas describing the real loads of polymerization drive are applied in mathematical modelling the power unit of polymerization reactor with specially designed induction motor. The numerical analysis of transient states was made on the basis of formulated mathematical model. Examples of transient responses and trajectories resulting from analysis are presented in the paper.

  20. Origins and Development of Initiation of Free Radical Polymerization Processes

    Directory of Open Access Journals (Sweden)

    Dietrich Braun

    2009-01-01

    Full Text Available At present worldwide about 45% of the manufactured plastic materials and 40% of synthetic rubber are obtained by free radical polymerization processes. The first free radically synthesized polymers were produced between 1910 and 1930 by initiation with peroxy compounds. In the 1940s the polymerization by redox processes was found independently and simultaneously at IG Farben in Germany and ICI in Great Britain. In the 1950s the systematic investigation of azo compounds as free radical initiators followed. Compounds with labile C–C-bonds were investigated as initiators only in the period from the end of the 1960s until the early 1980s. At about the same time, iniferters with cleavable S–S-bonds were studied in detail. Both these initiator classes can be designated as predecessors for “living” or controlled free radical polymerizations with nitroxyl-mediated polymerizations, reversible addition fragmentation chain transfer processes (RAFT, and atom transfer radical polymerizations (ATRP.

  1. Platinum porphyrins as ionophores in polymeric membrane electrodes

    DEFF Research Database (Denmark)

    Lvova, Larisa; Verrelli, Giorgio; Nardis, Sara

    2011-01-01

    A comparative study of Pt(II)- and Pt(IV)-porphyrins as novel ionophores for anion-selective polymeric membrane electrodes is performed. Polymeric membranes of different compositions, prepared by varying plasticizers, cationic and anionic additives and Pt porphyrins, have been examined by potenti......A comparative study of Pt(II)- and Pt(IV)-porphyrins as novel ionophores for anion-selective polymeric membrane electrodes is performed. Polymeric membranes of different compositions, prepared by varying plasticizers, cationic and anionic additives and Pt porphyrins, have been examined...... within the electrode membranes, while those based on Pt(IV)TPPCl2 operate via a mixed mode carrier mechanism, evidencing also a partial reduction of the starting ionophore to Pt(II)TPP. Spectrophotometric measurements of thin polymeric films indicate that no spontaneous formation of hydroxide ion bridged...... correlation between calculated and measured ionophore selectivity....

  2. Cooperative polymerization of α-helices induced by macromolecular architecture

    Science.gov (United States)

    Baumgartner, Ryan; Fu, Hailin; Song, Ziyuan; Lin, Yao; Cheng, Jianjun

    2017-07-01

    Catalysis observed in enzymatic processes and protein polymerizations often relies on the use of supramolecular interactions and the organization of functional elements in order to gain control over the spatial and temporal elements of fundamental cellular processes. Harnessing these cooperative interactions to catalyse reactions in synthetic systems, however, remains challenging due to the difficulty in creating structurally controlled macromolecules. Here, we report a polypeptide-based macromolecule with spatially organized α-helices that can catalyse its own formation. The system consists of a linear polymeric scaffold containing a high density of initiating groups from which polypeptides are grown, forming a brush polymer. The folding of polypeptide side chains into α-helices dramatically enhances the polymerization rate due to cooperative interactions of macrodipoles between neighbouring α-helices. The parameters that affect the rate are elucidated by a two-stage kinetic model using principles from nucleation-controlled protein polymerizations; the key difference being the irreversible nature of this polymerization.

  3. Experimental evolution in biofilm populations

    Science.gov (United States)

    Steenackers, Hans P.; Parijs, Ilse; Foster, Kevin R.; Vanderleyden, Jozef

    2016-01-01

    Biofilms are a major form of microbial life in which cells form dense surface associated communities that can persist for many generations. The long-life of biofilm communities means that they can be strongly shaped by evolutionary processes. Here, we review the experimental study of evolution in biofilm communities. We first provide an overview of the different experimental models used to study biofilm evolution and their associated advantages and disadvantages. We then illustrate the vast amount of diversification observed during biofilm evolution, and we discuss (i) potential ecological and evolutionary processes behind the observed diversification, (ii) recent insights into the genetics of adaptive diversification, (iii) the striking degree of parallelism between evolution experiments and real-life biofilms and (iv) potential consequences of diversification. In the second part, we discuss the insights provided by evolution experiments in how biofilm growth and structure can promote cooperative phenotypes. Overall, our analysis points to an important role of biofilm diversification and cooperation in bacterial survival and productivity. Deeper understanding of both processes is of key importance to design improved antimicrobial strategies and diagnostic techniques. PMID:26895713

  4. LEWIS ACID-CATALYZED POLYMERIZATION OF L-LACTIDE - KINETICS AND MECHANISM OF THE BULK-POLYMERIZATION

    NARCIS (Netherlands)

    NIJENHUIS, AJ; GRIJPMA, DW; PENNINGS, AJ

    1992-01-01

    The kinetics of the L-lactide bulk polymerization was studied using tin(II) bis(2-ethylhexanoate) and zinc bis(2,2-dimethyl-3,5-heptanedionato-O,O'). Up to 80% conversion, the rate of polymerization using tin(II) bis(2-ethylhexanoate) is higher than that with the zinc-containing catalyst, while at

  5. Quenching Phase Separation by Vapor Deposition Polymerization

    Science.gov (United States)

    Tao, Ran; Anthamatten, Mitchell

    2015-03-01

    Initiated chemical vapor deposition (iCVD) is a solventless, free radical technique predominately used to deposit homogeneous films of linear and crosslinked polymers directly from gas phase feeds. We report a template-free method to fabricate continuous-phase porous polymer films by simultaneous phase separation during iCVD. Phase separation during film growth is achieved by condensing an inert porogen, along with initiator, monomer, and crosslinker. When the vapor mixture transports to the cooled substrate, phase separation occurs along with polymerization and crosslinking, which quench the state of phase separation. The kinetics of spontaneously phase separation can be qualitatively understood on the basis of Cahn-Hilliard theory. A series of films were grown by varying monomer and porogen's degree of saturation. Deposited films were studied by electron microscopy and spectroscopic techniques.

  6. DETECTION OF COMPLEXES OLIGODEOXYNUCLEOTIDES WITH POLYMERIC CARRIERS

    Directory of Open Access Journals (Sweden)

    V. V. Vlizlo

    2013-10-01

    Full Text Available The new method for detection of cationic oligoelectrolytes conjugates with oligodeoxyonucleotides, based on free diffusion of these substances in 0.8% agarose gels is developed. It enables to simplify and reduce the cost of visual identification of the best carrier among various polymer compounds and to uncover the fact of complex formation between the interacting agents resulting in formation of a ring precipitation. The universality of the proposed methodological approach is confirmed by interaction of coligodeoxynucleotides with other cationic polymer of natural origin, namely chitosan. Comparative analysis of our approach applicationto turbidimetry data concerning coligodeoxynucleotides complexes and their electrophoresis showed some advantages, among them are the ability to screen simultaneously a large number of polymeric carriers and no need for using of more expensive equipment and materials. To conclude the complexing occurrence it is enough nanomol amounts of oligodeoxynucleotide.

  7. Vegetal fibers in polymeric composites: a review

    Directory of Open Access Journals (Sweden)

    Paulo Henrique Fernandes Pereira

    2015-02-01

    Full Text Available The need to develop and commercialize materials containing vegetal fibers has grown in order to reduce environmental impact and reach sustainability. Large amounts of lignocellulosic materials are generated around the world from several human activities. The lignocellulosic materials are composed of cellulose, hemicellulose, lignin, extractives and ashes. Recently these constituents have been used in different applications; in particular, cellulose has been the subject of numerous works on the development of composite materials reinforced with natural fibers. Many studies have led to composite materials reinforced with fibers to improve the mechanical, physical, and thermal properties. Furthermore, lignocellulosic materials have been treated to apply in innovative solutions for efficient and sustainable systems. This paper aims to review the lignocellulosic fibers characteristics, as well as to present their applications as reinforcement in composites of different polymeric matrices.

  8. Final Technical Report: Collaborative Research. Polymeric Muliferroics

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Shenqiang [Univ. of Kansas, Lawrence, KS (United States)

    2015-06-05

    The goal of this project is to investigate room temperature magnetism and magnetoelectric coupling of polymeric multiferroics. A new family of organic charge-transfer complexes has been emerged as a fascinating opportunity for the development of all-organic electrics and spintronics due to its weak hyperfine interaction and low spin-orbit coupling; nevertheless, direct observations of room temperature magnetic spin ordering have yet to be accomplished in organic charge-transfer complexes. Furthermore, room temperature magnetoelectric coupling effect hitherto known multiferroics, is anticipated in organic donor-acceptor complexes because of magnetic field effects on charge-transfer dipoles, yet this is also unexplored. The PIs seek to fundamental understanding of the synthetic control of organic complexes to demonstrate and explore room temperature multiferroicity.

  9. Polymeric molecular sieve membranes for gas separation

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Sheng; Qiao, Zhenan; Chai, Songhai

    2017-08-15

    A porous polymer membrane useful in gas separation, the porous polymer membrane comprising a polymeric structure having crosslinked aromatic groups and a hierarchical porosity in which micropores having a pore size less than 2 nm are present at least in an outer layer of the porous polymer membrane, and macropores having a pore size of over 50 nm are present at least in an inner layer of the porous polymer membrane. Also described are methods for producing the porous polymer membrane in which a non-porous polymer membrane containing aromatic rings is subjected to a Friedel-Crafts crosslinking reaction in which a crosslinking molecule crosslinks the aromatic rings in the presence of a Friedel-Crafts catalyst and organic solvent under sufficiently elevated temperature, as well as methods for using the porous polymer membranes for gas or liquid separation, filtration, or purification.

  10. REVIEW ARTICLE Multiphoton polymerization of hybrid materials

    Science.gov (United States)

    Farsari, Maria; Vamvakaki, Maria; Chichkov, Boris N.

    2010-12-01

    Multiphoton polymerization has been developed as a direct laser writing technique for the preparation of complex 3D structures with resolution beyond the diffraction limit of light. The combination of two or more hybrid materials with different functionalities in the same system has allowed the preparation of structures with advanced properties and functions. Furthermore, the surface functionalization of the 3D structures opens new avenues for their applications in a variety of nanobiotechnological fields. This paper describes the principles of 2PP and the experimental set-up used for 3D structure fabrication. It also gives an overview of the materials that have been employed in 2PP so far and depicts the perspectives of this technique in the development of new active components.

  11. Polymerization of Formic Acid under High Pressure

    Energy Technology Data Exchange (ETDEWEB)

    Goncharov, A F; Manaa, M R; Zaug, J M; Fried, L E; Montgomery, W B

    2004-08-23

    We report combined Raman, infrared (IR) and x-ray diffraction (XRD) measurements, along with ab initio calculations on formic acid under pressure up to 50 GPa. Contrary to the report of Allan and Clark (PRL 82, 3464 (1999)), we find an infinite chain low-temperature Pna2{sub 1} structure consisting of trans molecules to be a high-pressure phase at room temperature. Our data indicate the symmetrization and a partially covalent character of the intra-chain hydrogen bonds above approximately 20 GPa. Raman spectra and XRD patterns indicate a loss of the long-range order at pressures above 40 GPa with a large hysteresis at decompression. We attribute this behavior to a three-dimensional polymerization of formic acid.

  12. Using Polymeric Scaffolds for Vascular Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Alida Abruzzo

    2014-01-01

    Full Text Available With the high occurrence of cardiovascular disease and increasing numbers of patients requiring vascular access, there is a significant need for small-diameter (<6 mm inner diameter vascular graft that can provide long-term patency. Despite the technological improvements, restenosis and graft thrombosis continue to hamper the success of the implants. Vascular tissue engineering is a new field that has undergone enormous growth over the last decade and has proposed valid solutions for blood vessels repair. The goal of vascular tissue engineering is to produce neovessels and neoorgan tissue from autologous cells using a biodegradable polymer as a scaffold. The most important advantage of tissue-engineered implants is that these tissues can grow, remodel, rebuild, and respond to injury. This review describes the development of polymeric materials over the years and current tissue engineering strategies for the improvement of vascular conduits.

  13. A Coating-Free Nonfouling Polymeric Elastomer.

    Science.gov (United States)

    Hung, Hsiang-Chieh; Jain, Priyesh; Zhang, Peng; Sun, Fang; Sinclair, Andrew; Bai, Tao; Li, Bowen; Wu, Kan; Tsao, Caroline; Liu, Erik J; Sundaram, Harihara S; Lin, Xiaojie; Farahani, Payam; Fujihara, Timothy; Jiang, Shaoyi

    2017-08-01

    Medical devices face nonspecific biofouling from proteins, cells, and microorganisms, which significantly contributes to complications and device failure. Imparting these devices with nonfouling capabilities remains a major challenge, particularly for those made from elastomeric polymers. Current strategies, including surface coating and copolymerization/physical blending, necessitate compromise among nonfouling properties, durability, and mechanical strength. Here, a new strategy is reported to achieve both high bulk mechanical strength and excellent surface nonfouling properties, which are typically contradictory, in one material. This is realized through a nonfouling polymeric elastomer based on zwitterionic polycarboxybetaine derivatives. By hiding both charged moieties of the zwitterionic compounds with hydrocarbon ester and tertiary amine groups, the bulk polymer itself is elastomeric and hydrophobic while its superhydrophilic surface properties are restored upon hydrolysis. This coating-free nonfouling elastomer is a highly promising biomaterial for biomedical and engineering applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Admicellar polymerization of methyl methacrylate on aluminum pigments.

    Science.gov (United States)

    Karlsson, Philip M; Esbjörnsson, Neo B; Holmberg, Krister

    2009-09-15

    Micrometer-sized aluminum particles used as pigments in silver inks and coatings are reactive in water-based formulations. This leads to hydrogen gas evolution in the paint containers and loss of the silvery appearance of the coating. The protection of aluminum pigments from water is called inhibition and it was shown in earlier work that anionic surfactants of the phosphate ester type are effective as inhibitors, forming a protective bilayer on the aluminum pigment surface. In this work, the protection of aluminum pigments has been extended by means of an encapsulating polymer layer. A poly(methyl methacrylate) (PMMA) coating was applied on aluminum pigment particles by admicellar polymerization of methyl methacrylate. A surfactant is first adsorbed on the aluminum pigment surface and a hydrophobic monomer and initiator is subsequently solubilized inside the hydrophobic domain of the surfactant aggregates that cover the pigment. Diffuse Reflective Infrared Fourier Transform (DRIFT) spectrometry showed that PMMA was formed on the pigment particles and the amount of organic material was up to 24% of the particle weight, as measured by Thermo Gravimetric Analysis (TGA). A hydrophobic initiator, such as benzoyl peroxide, gave good results but the hydrophilic sodium persulfate resulted in poor yield of encapsulating polymer. Sodium dodecyl sulfate, which by itself is not an efficient inhibitor, was used as surfactant. Good results were obtained in terms of protection from an alkaline solution, indicating that the polymer coating per se is an efficient inhibitor. The highest amount of polymer formed on the pigment surface was obtained when the surfactant concentration was around the CMC.

  15. Semiconducting III-V compounds

    CERN Document Server

    Hilsum, C; Henisch, Heinz R

    1961-01-01

    Semiconducting III-V Compounds deals with the properties of III-V compounds as a family of semiconducting crystals and relates these compounds to the monatomic semiconductors silicon and germanium. Emphasis is placed on physical processes that are peculiar to III-V compounds, particularly those that combine boron, aluminum, gallium, and indium with phosphorus, arsenic, and antimony (for example, indium antimonide, indium arsenide, gallium antimonide, and gallium arsenide).Comprised of eight chapters, this book begins with an assessment of the crystal structure and binding of III-V compounds, f

  16. Effect of alkaline precipitation on Cr species of Cr(III)-bearing complexes typically used in the tannery industry.

    Science.gov (United States)

    Wang, Dandan; Ye, Yuxuan; Liu, Hui; Ma, Hongrui; Zhang, Weiming

    2017-11-03

    Various organic compounds extensively used in the leather industry could influence the performance of alkaline precipitation with Cr(III). This study focused on two typical Cr(III)-bearing complexes (Cr(III)-collagen and Cr(III)-citrate) ubiquitous in tannery effluent yet with distinct treatment efficiencies, as Cr(III) was much more difficult to remove in the Cr(III)-citrate solution. Comprehensive analytical methods were employed to explore the intrinsic mechanism. It was found that a lower removal efficiency towards Cr(III) was significantly associated with higher oligomers. The molecular size of the Cr(III)-citrate complex continued to increase with rising pH, making it larger overall than Cr(III)-collagen species. The growing oligomer moiety of dissolved Cr(III)-complex species could persist in the stronger basic pH range, leading to the large amount of residual Cr(III) in the Cr(III)-citrate system. Combining this result with potentiometric titration and X-ray photoelectron spectroscopy data, it was believed that the polymeric species other than monomers facilitated resisting the attack from hydroxide ions, and the postulated Cr(III)-citrate species towards higher oligomers were discovered. Beyond that, both charge neutralization and sweeping effects were presented among the gradually emerging flocs in the Cr(III)-collagen system together with the electric double layer compression effect derived from salinity, thus resulting in a larger floc size and higher Cr(III) removal efficiency in saline solutions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Surface characterization of the interfaces from plasma-polymerized acetylene films deposited onto cold-rolled steel for rubber-to-metal bonding

    Science.gov (United States)

    Rosales Lombardi, Pablo I.

    The molecular structure of the interface between plasma-polymerized acetylene films and steel was determined using in-situ reflection-absorption infrared spectroscopy (RAIR) and X-ray photoelectron spectroscopy (XPS). Plasma-polymerized acetylene films were deposited onto polished steel substrates in microwave (MW) and radio frequency (RF)-powered reactors. The films deposited in RF-powered reactors were characterized in-situ using XPS and FTIR spectrometers that were interfaced directly to the reactors. RAIR showed that the plasma polymerized films contained large numbers of methyl and methylene groups but only a small number of monosubstituted acetylene groups, indicating that there was substantial rearrangement of the monomer molecules during plasma polymerization. The rearrangement of the monomer molecules during plasma was also determined by optical emission spectroscopy (OES), where CH and C2 species predominated in the optical emission spectra. Bands were observed near 1020 and 885 cm-1 in the RAIR spectra that were attributed to skeletal stretching vibrations in C-C-O-Fe groups, indicating that the plasma-polymerized films interacted with the substrate through formation of alkoxide bonds. Another band was observed near 1565 cm-1 and attributed to carboxylate groups in the interface between films and the oxidized surface of the substrate. Results from XPS also confirmed the formation of alkoxide and carboxylate groups in the interface during plasma polymerization of acetylene. Results from XPS showed that the surface of steel substrates consisted mostly of a mixture of Fe2O3 and FeOOH and that iron was mostly present in the Fe(III) oxidation state. However, during plasma-polymerization of acetylene, there was a tendency for the concentration of Fe(II) to increase, due to the reducing nature of argon/acetylene plasmas. Natural rubber reacted with plasma-polymerized acetylene primers through unsaturated functional groups present in the film. The RAIR and XPS

  18. Amine-templated polymeric lanthanide formates: synthesis, characterization, and applications in luminescence and magnetism.

    Science.gov (United States)

    Rossin, Andrea; Giambastiani, Giuliano; Peruzzini, Maurizio; Sessoli, Roberta

    2012-06-18

    The novel polymeric formates of general formula [(Fmd)Ln(III)(HCOO)(4)](∞) (Fmd(+) = NH(2)-CH(+)-NH(2); Ln = Eu (1), Gd (2), Tb (3), Dy (4)] were synthesized through solvothermal methods in formamide solutions. The compounds are isotructural; they crystallize in the orthorhombic C222(1) chiral space group. The coordination geometry at the metal centers is square antiprismatic (coordination number eight), with each formate ligand bridging adjacent lanthanide ions. The overall negative three-dimensional (3D) framework charge is balanced by the formamidinium cations sitting inside the channels along the a axis, forming extensive N-H···O hydrogen bonding with the surrounding cage. All the compounds have been characterized through single-crystal/powder X-ray diffraction, IR spectroscopy, and TG-MS analysis. Finally, their luminescence and magnetic properties have been assessed, leading to remarkable emission intensities, especially for the Tb(III) compound (Φ = 0.83), with corresponding lifetime decays in the micro (Dy) and millisecond (Tb, Eu) time scale. A weak but sizable antiferromagnetic interaction has been observed for the Gd(III) derivative.

  19. Investigating Fracture Behaviors of Polymer and Polymeric Composite Materials Using Spiral Notch Torsion Test

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jy-An John [ORNL; Ren, Fei [ORNL; Tan, Ting [ORNL; Lara-Curzio, Edgar [ORNL; Agastra, Pancasatya [Montana State University; Mandell, John [Montana State University; Bertelsen, Williams D. [Gougeon Brothers, Inc.; LaFrance, Carl M. [Molded Fiber Glass Companies

    2011-01-01

    Wind turbine blades are usually fabricated from fiber reinforced polymeric (FRP) materials, which are subject to complex loading conditions during service. The reliability of the blades thus depends on the mechanical behaviors of the FRP under various loading conditions. Specifically, the fracture behavior of FRP is of great importance to both the scientific research community and the wind industry. In the current project, a new testing technique is proposed based on the spiral notch torsion test (SNTT) to study the fracture behavior of composite structures under mixed mode loading conditions, particularly under combined Mode I (flexural or normal tensile stress) and Mode III (torsional shear stress) loading. For the SNTT test method, round-rod specimens with V-grooved spiral lines are subjected to pure torsion. Depending on the pitch angle of the spiral lines, pure Mode I, pure Mode III, or mixed Mode I/Mode III loading conditions can be simulated. A three dimensional finite element analysis is then used to evaluate the fracture toughness and energy release rate of SNTT specimens. In the current study, both epoxy and fiberglass reinforced epoxy materials are investigated using the SNTT technique. This paper will discuss the fracture behaviors of mode I and mixed mode samples, with or without fatigue precrack. In addition, results from fractographic study and finite element analysis will be presented and discussed in detail.

  20. Micro-fluidic partitioning between polymeric sheets for chemical amplification and processing

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, Brian L.

    2017-01-24

    A system for fluid partitioning for chemical amplification or other chemical processing or separations of a sample, comprising a first dispenser of a first polymeric sheet, wherein the first polymeric sheet contains chambers; a second dispenser of a second polymeric sheet wherein the first dispenser and the second dispenser are positioned so that the first polymeric sheet and the second polymeric sheet become parallel; a dispenser of the fluid positioned to dispense the fluid between the first polymeric sheet and the second polymeric sheet; and a seal unit that seals the first polymeric sheet and the second polymeric sheet together thereby sealing the sample between the first polymeric sheet and the second polymeric sheet and partitioning the fluid for chemical amplification or other chemical processing or separations.

  1. Surface plasmon resonance methodology for monitoring polymerization kinetics and morphology changes of brushes—evaluated with poly(N-isopropylacrylamide)

    Energy Technology Data Exchange (ETDEWEB)

    Emilsson, Gustav [Dept. of Chemistry and Chemical Engineering, Chalmers University of Technology, 41296 Göteborg (Sweden); Schoch, Rafael L.; Oertle, Philipp [Biozentrum and the Swiss Nanoscience Institute, University of Basel, 4056 Basel (Switzerland); Xiong, Kunli [Dept. of Chemistry and Chemical Engineering, Chalmers University of Technology, 41296 Göteborg (Sweden); Lim, Roderick Y.H. [Biozentrum and the Swiss Nanoscience Institute, University of Basel, 4056 Basel (Switzerland); Dahlin, Andreas B., E-mail: adahlin@chalmers.se [Dept. of Chemistry and Chemical Engineering, Chalmers University of Technology, 41296 Göteborg (Sweden)

    2017-02-28

    Highlights: • Real-time monitoring of thickness and the kinetics of polymerization. • Probing brush height both above and below the lower critical solution temperature. • Quantitative analysis of thermal actuation of poly(N-isopropylacrylamide) brushes. - Abstract: Polymerization from surfaces and the resulting “brushes” have many uses in the development of novel materials and functional interfaces. However, it is difficult to accurately monitor the polymerization rate, which limits the use of polymer brushes in applications where control of thickness is desirable. We present a new methodology based on angular surface plasmon resonance (SPR) which provides real-time measurements of the thickness evolution during atom transfer radical polymerization, using poly(N-isopropylacrylamide) as an example. Our data analysis shows that the growth is linear with a rate of ∼20 nm/min in a water/methanol mixture up to ∼100 nm after which chain termination gradually reduces the growth rate. Further, we introduce an improved method in SPR which makes it possible to determine changes in brush height and refractive index during switching of responsive polymers. The ratio between heights in the coil to globule transition at 32 °C in water was found to be almost 5, independent of the initial absolute height up to ∼200 nm, in agreement with theory. Complementary quartz crystal microbalance and atomic force microscopy data confirm the accuracy of our results. With the methodology presented here the established SPR technique can be used for quantitative characterization of surface-initiated polymerization and responsive polymer brushes.

  2. Photoinduced Acrylate Polymerization: Unexpected Reduction in Chain Branching.

    Science.gov (United States)

    Wenn, Benjamin; Reekmans, Gunter; Adriaensens, Peter; Junkers, Thomas

    2015-08-01

    The branching stemming from midchain radical formation in n-butyl acrylate polymerization is investigated via melt-state (13) C NMR measurements. The dependence of the degree of branching (DB) on the monomer conversion of the system is examined for photoinduced polymerizations, revealing a steady increase in branching with conversion. For polymerization at moderate light intensities, an increase in branching from 0.03% to 0.37% is observed for polymerizations at 60 °C, which is fivefold below the level of branching observed in thermally initiated polymerizations under otherwise identical reaction conditions. The reason for this overall reduction in branching remains momentarily unclear; yet, a strong dependence of branching on light intensity is observed. While polymerization under a 1 W LED lamp results at almost full monomer conversion in branching degrees of 0.22%, polymerization under a 400 W lamp yields 1.81% of chain branches. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Polymeric drugs: Advances in the development of pharmacologically active polymers

    Science.gov (United States)

    Li, Jing; Yu, Fei; Chen, Yi; Oupický, David

    2015-01-01

    Synthetic polymers play a critical role in pharmaceutical discovery and development. Current research and applications of pharmaceutical polymers are mainly focused on their functions as excipients and inert carriers of other pharmacologically active agents. This review article surveys recent advances in alternative pharmaceutical use of polymers as pharmacologically active agents known as polymeric drugs. Emphasis is placed on the benefits of polymeric drugs that are associated with their macromolecular character and their ability to explore biologically relevant multivalency processes. We discuss the main therapeutic uses of polymeric drugs as sequestrants, antimicrobials, antivirals, and anticancer and anti-inflammatory agents. PMID:26410809

  4. Intrinsic embedded sensors for polymeric mechatronics: flexure and force sensing.

    Science.gov (United States)

    Jentoft, Leif P; Dollar, Aaron M; Wagner, Christopher R; Howe, Robert D

    2014-02-25

    While polymeric fabrication processes, including recent advances in additive manufacturing, have revolutionized manufacturing, little work has been done on effective sensing elements compatible with and embedded within polymeric structures. In this paper, we describe the development and evaluation of two important sensing modalities for embedding in polymeric mechatronic and robotic mechanisms: multi-axis flexure joint angle sensing utilizing IR phototransistors, and a small (12 mm), three-axis force sensing via embedded silicon strain gages with similar performance characteristics as an equally sized metal element based sensor.

  5. Styrene polymerization in three-component cationic microemulsions

    Energy Technology Data Exchange (ETDEWEB)

    Perez-Luna, V.H.; Puig, J.E. (Universidad de Guadalajara (Mexico)); Castano, V.M. (Instituto de Fisica (Mexico)); Rodriguez, B.E.; Murthy, A.K.; Kaler, E.W. (Univ. of Delaware, Newark (USA))

    1990-06-01

    The polymerization of styrene in three-component dodecyltrimethylammonium bromide (DTAB) microemulsions is reported. The structure of the unpolymerized microemulsions, determined by conductimetry and quasielastic light scattering (QLS), is consistent with styrene-swollen micelles in equilibrium with regular micelles, both dispersed in an aqueous phase. Polymerization of these transparent microemulsions, monitored by QLS an dilatometry, produced stable, bluish monodisperse microlatices with particle radii ranging from 20 to 30 nm, depending on styrene content. Polymerization initiation appears to occur in the styrene-swollen micelles, and the polymer particles grow by recruiting monomer and surfactant from uninitiated droplets and small micelles.

  6. Intrinsic Embedded Sensors for Polymeric Mechatronics: Flexure and Force Sensing

    Directory of Open Access Journals (Sweden)

    Leif P. Jentoft

    2014-02-01

    Full Text Available While polymeric fabrication processes, including recent advances in additive manufacturing, have revolutionized manufacturing, little work has been done on effective sensing elements compatible with and embedded within polymeric structures. In this paper, we describe the development and evaluation of two important sensing modalities for embedding in polymeric mechatronic and robotic mechanisms: multi-axis flexure joint angle sensing utilizing IR phototransistors, and a small (12 mm, three-axis force sensing via embedded silicon strain gages with similar performance characteristics as an equally sized metal element based sensor.

  7. Thermally and photoinduced polymerization of ultrathin sexithiophene films

    Energy Technology Data Exchange (ETDEWEB)

    Sander, Anke; Hammer, Rene; Duncker, Klaus; Förster, Stefan [Institute of Physics, Martin-Luther-Universität Halle-Wittenberg, Von-Danckelmann-Platz 3, 06120 Halle(Saale) (Germany); Widdra, Wolf, E-mail: wolf.widdra@physik.uni-halle.de [Institute of Physics, Martin-Luther-Universität Halle-Wittenberg, Von-Danckelmann-Platz 3, 06120 Halle(Saale) (Germany); Max Planck Institute of Microstructure Physics, Weinberg 2, 06120 Halle(Saale) (Germany)

    2014-09-14

    The thermally-induced polymerization of α-sexithiophene (6T) molecules on Ag(001) and Au(001) gives rise to long unbranched polymer chains or branched polymer networks depending on the annealing parameters. There, the onset temperature for polymerization depends on the strength of interaction with the underlying substrate. Similar polymerization processes are also induced by ultraviolet radiation with photon energies between 3.0 and 4.2 eV. Radical formation by an electronic excitation in the 6T molecule is proposed as the driving mechanism that necessitates the interplay with the metallic substrate.

  8. Novel Complex Polymers with Carbazole Functionality by Controlled Radical Polymerization

    Directory of Open Access Journals (Sweden)

    Kazuhiro Nakabayashi

    2012-01-01

    Full Text Available This review summarizes recent advances in the design and synthesis of novel complex polymers with carbazole moieties using controlled radical polymerization techniques. We focus on the polymeric architectures of block copolymers, star polymers, including star block copolymers and miktoarm star copolymers, comb-shaped copolymers, and hybrids. Controlled radical polymerization of N-vinylcarbazole (NVC and styrene and (methacrylate derivatives having carbazole moieties is well advanced, leading to the well-controlled synthesis of complex macromolecules. Characteristic optoelectronic properties, assembled structures, and three-dimensional architectures are briefly introduced.

  9. Hybrid polymerization of iso-butyl vinyl ether

    Science.gov (United States)

    Jiang, Bo; Yang, Lixing; Zhou, Yong; Huang, Guanglin; Lin, Libin

    2002-03-01

    The radiation-induced hybrid polymerization in the presence of the N-alkoxypyridinium salt having relatively stable nonnucleophilic anion (PF 6-) has been investigated in the paper. Based on the analysis of experimental data and the GPC spectrum, the onium salts not only oxidize α-alkoxyalkyl radicals, produced from IBVE in dichloromethane by irradiation, to the corresponding cations, but also give nonnucleophilic anions PF 6- for the polymerization system. The experimental results clearly demonstrate that free radical and cationic polymerization mechanisms occurred simultaneously in IBVE/EMP +PF 6-/CH 2Cl 2 systems on irradiation with γ-ray.

  10. Accurate fluorescent polymeric thermometers containing an ionic component.

    Science.gov (United States)

    Gota, Chie; Uchiyama, Seiichi; Ohwada, Tomohiko

    2007-02-01

    Fluorescent polymeric thermometers consisting of only N-alkylacrylamide and fluorescent components show rather low temperature resolution in their functional ranges (ca. 15-50 degrees C) because of the occurrence of intermolecular aggregation, which causes hysteresis in their fluorescence response to changes in temperature. By adding an ionic component to prevent such intermolecular aggregation, we obtained four fluorescent polymeric thermometers that offer high temperature resolution (<0.2 degrees C). Each new fluorescent polymeric thermometer covered the temperature range, 9-33 degrees C, 30-51 degrees C, 49-66 degrees C or 4-38 degrees C.

  11. Evolution of Interstellar Grains

    Science.gov (United States)

    Allamandola, Lou J.; DeVincenzi, Donald L. (Technical Monitor)

    1998-01-01

    During the past two decades observations combined with laboratory simulations, have revolutionized our understanding of interstellar ice and dust, the raw materials from which planets, comets and stars form. Most interstellar material is concentrated in large molecular clouds where simple molecules are formed by dust-grain and gas-phase reactions. Gaseous species striking the cold (10K) dust stick, forming an icy grain mantle. This accretion, coupled with UV photolysis, produces a complex chemical mixture containing volatile, non-volatile, and isotopically fractionated species. Ices in molecular clouds contain the very simple molecules H2O, CH3OH, CO, CO2, H2, and perhaps some NH3 and H2CO, as well as more complex species. The evidence for these compounds, as well as carbon-rich materials, will be reviewed and the possible connections with comets and meteorites will be presented in the first part of the talk . The second part of the presentation will focus on interstellar/precometary ice photochemical evolution and the species likely to be found in comets. The chemical composition and photochemical evolution of realistic interstellar/pre-cometary ice analogs will be discussed. Ultraviolet photolysis of these ices produces H2, H2CO, CO2, CO, CH4, HCO, and more complex molecules. When ices representative of interstellar grains and comets are exposed to UV radiation at low temperature a series of moderately complex organic molecules are formed in the ice including: CH3CH2OH (ethanol), HC(=O)NH2 (formamide), CH3C(=O)NH2 (acetamide), and R-C=N (nitriles). Several of these are already known to be in the interstellar medium, and their presence indicates the importance of grain processing. After warming to room temperature an organic residue remains. This is composed primarily of hexamethylenetetramine (HMT, C6H12N4), with lesser amounts of polyoxymethylene-related species (POMs), amides, and ketones. This is in sharp contrast to the organic residues produced by

  12. MAQARIN natural analogue study: phase III

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, W.R.; Mazurek, M.; Waber, H.N. [Univ. of Berne (Switzerland). Institutes of Geology, Mineralogy and Petrology, Rock-Water Interaction Group (GGWW); Arlinger, J.; Erlandson, A.C.; Hallbeck, L.; Pedersen, K. [Goeteborg Univ. (Sweden). Dept. of General and Marine Microbiology; Boehlmann, W.; Fritz, P.; Geyer, S.; Geyer, W.; Hanschman, G.; Kopinke, F.D.; Poerschmann, J. [Umweltforschungszentrum Leipzig-Halle (Germany); Chambers, A.V.; Haworth, A.; Ilett, D.; Linklater, C.M.; Tweed, C.J. [AEA Technology plc, Harwell (United Kingdom); Chenery, S.R.N.; Kemp, S.J.; Milodowski, A.E.; Pearce, J.M.; Reeder, S.; Rochelle, C.A.; Smith, B.; Wetton, P.D.; Wragg, J. [British Geological Survey, Keyworth (United Kingdom); Clark, I.D. [Univ. of Ottawa (Canada). Dept. of Geology; Hodginson, E.; Hughes, C.R. [Univ. of Manchester (United Kingdom). Dept. of Earth Sciences; Hyslop, E.K. [British Geological Survey, Edinburgh (United Kingdom); Karlsson, F. [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Khoury, H.N.; Salameh, E. [Univ. of Jordan, Amman (Jordan); Lagerblad, B. [Cement Inst., Stockholm (Sweden); Longworth, G. [Univ. of Manchester (United Kingdom). Dept. of Geology; Pitty, A.F. [Private consultant, Norwich (United Kingdom); Savage, D. [QuantiSci Ltd, Melton Mowbray (United Kingdom); Smellie, J.A.T. [ed.] [Conterra AB, Uppsala (Sweden)

    1998-12-01

    This report represents the conclusion to Phase III of the Maqarin Natural Analogue Study. The main thrust was to establish the origin and chemistry of the Western Springs hyper alkaline groundwaters (Na/K enriched Ca(OH){sub 2} type) and to study their interaction with rocks of different compositions, as natural analogues to key processes that might occur at an early stage within the `alkali disturbed zone` of cementitious repositories in different host rocks. Whilst earlier studies at Maqarin were very much site-specific and process-oriented, Phase III provided a regional perspective to the geological evolution of the Maqarin region. This was made possible by greater field access which allowed a more systematic structural and geomorphological study of the area. This has resulted in a greater understanding of the age and spatial relationships concerning formation of the cement zones through spontaneous combustion of the Bituminous Marls, and the subsequent formation of high pH groundwaters at the Eastern and Western Springs locations. At the Western Springs locality, hydrochemical and hydrogeological evaluation of new and published data (plus access to unpublished data), together with detailed mineralogical and geochemical studies, helped to clarify the very earliest stage of cement leachate/host rock interaction. The data were used also to test coupled flow/transport codes developed to assess the long-term evolution of a cementitious repository. Additional objectives addressed include: a) rock matrix diffusion, b) the occurrence and chemical controls on zeolite composition, e) the occurrence and chemical controls on clay stability, and d) the role of microbes, organics and colloids in trace element transport. The Maqarin site now provides a consistent picture explaining the origin of the hyperalkaline groundwaters, and is therefore a unique location for the examination of the mechanisms and processes associated with cementitious repositories. Application of these

  13. MAQARIN natural analogue study: phase III

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, W.R.; Mazurek, M.; Waber, H.N. [Univ. of Berne (Switzerland). Institutes of Geology, Mineralogy and Petrology, Rock-Water Interaction Group (GGWW); Arlinger, J.; Erlandson, A.C.; Hallbeck, L.; Pedersen, K. [Goeteborg University (Sweden). Dept. of General and Marine Microbiology; Boehlmann, W.; Fritz, P.; Geyer, S.; Geyer, W.; Hanschman, G.; Kopinke, F.D.; Poerschmann, J. [Umweltforschungszentrum Leipzig-Halle (Germany); Chambers, A.V.; Haworth, A.; Ilett, D.; Linklater, C.M.; Tweed, C.J. [AEA Technology plc, Harwell (United Kingdom); Chenery, S.R.N.; Kemp, S.J.; Milodowski, A.E.; Pearce, J.M.; Reeder, S.; Rochelle, C.A.; Smith, B.; Wetton, P.D.; Wragg, J. [British Geological Survey, Keyworth (United Kingdom); Clark, I.D. [Univ. of Ottawa (Canada). Dept. of Geology; Hodginson, E.; Hughes, C.R. [Univ. of Manchester (United Kingdom). Dept. of Earth Sciences; Hyslop, E.K. [British Geological Survey, Edinburgh (United Kingdom); Karlsson, F. [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Khoury, H.N.; Salameh, E. [Univ. of Jordan, Amman (Jordan); Lagerblad, B. [Cement Institute, Stockholm (Sweden); Longworth, G. [Univ. of Manchester (United Kingdom). Dept. of Geology; Pitty, A.F. [Private consultant, Norwich (United Kingdom); Savage, D. [QuantiSci Ltd, Melton Mowbray (United Kingdom); Smellie, J.A.T. [ed.] [Conterra AB, Uppsala (Sweden)

    1998-12-01

    This report represents the conclusion to Phase III of the Maqarin Natural Analogue Study. The main thrust was to establish the origin and chemistry of the Western Springs hyper alkaline groundwaters (Na/K enriched Ca(OH){sub 2} type) and to study their interaction with rocks of different compositions, as natural analogues to key processes that might occur at an early stage within the `alkali disturbed zone` of cementitious repositories in different host rocks. Whilst earlier studies at Maqarin were very much site-specific and process-oriented, Phase III provided a regional perspective to the geological evolution of the Maqarin region. This was made possible by greater field access which allowed a more systematic structural and geomorphological study of the area. This has resulted in a greater understanding of the age and spatial relationships concerning formation of the cement zones through spontaneous combustion of the Bituminous Marls, and the subsequent formation of high pH groundwaters at the Eastern and Western Springs locations. At the Western Springs locality, hydrochemical and hydrogeological evaluation of new and published data (plus access to unpublished data), together with detailed mineralogical and geochemical studies, helped to clarify the very earliest stage of cement leachate/host rock interaction. The data were used also to test coupled flow/transport codes developed to assess the long-term evolution of a cementitious repository. Additional objectives addressed include: a) rock matrix diffusion, b) the occurrence and chemical controls on zeolite composition, e) the occurrence and chemical controls on clay stability, and d) the role of microbes, organics and colloids in trace element transport. The Maqarin site now provides a consistent picture explaining the origin of the hyperalkaline groundwaters, and is therefore a unique location for the examination of the mechanisms and processes associated with cementitious repositories. Application of these

  14. PREFACE: Quantum Optics III

    Science.gov (United States)

    Orszag, M.; Retamal, J. C.; Saavedra, C.; Wallentowitz, S.

    2007-06-01

    All the 50 years of conscious pondering did not bring me nearer to an answer to the question `what is light quanta?'. Nowadays, every rascal believes, he knows it, however, he is mistaken. (A Einstein, 1951 in a letter to M Besso) Quantum optics has played a key role in physics in the last several decades. On the other hand, in these early decades of the information age, the flow of information is becoming more and more central to our daily life. Thus, the related fields of quantum information theory as well as Bose-Einstein condensation have acquired tremendous importance in the last couple of decades. In Quantum Optics III, a fusion of these fields appears in a natural way. Quantum Optics III was held in Pucón, Chile, in 27-30 of November, 2006. This beautiful location in the south of Chile is near the lake Villarrica and below the snow covered volcano of the same name. This fantastic environment contributed to a relaxed atmosphere, suitable for informal discussion and for the students to have a chance to meet the key figures in the field. The previous Quantum Optics conferences took place in Santiago, Chile (Quantum Optics I, 2000) and Cozumel, Mexico (Quantum Optics II, 2004). About 115 participants from 19 countries attended and participated in the meeting to discuss a wide variety of topics such as quantum-information processing, experiments related to non-linear optics and squeezing, various aspects of entanglement including its sudden death, correlated twin-photon experiments, light storage, decoherence-free subspaces, Bose-Einstein condensation, discrete Wigner functions and many more. There was a strong Latin-American participation from Argentina, Brazil, Chile, Colombia, Peru, Uruguay, Venezuela and Mexico, as well as from Europe, USA, China, and Australia. New experimental and theoretical results were presented at the conference. In Latin-America a quiet revolution has taken place in the last twenty years. Several groups working in quantum optics and

  15. Metallocene-catalyzed alkene polymerization and the observation of Zr-allyls

    OpenAIRE

    Landis, Clark R.; Christianson, Matthew D.

    2006-01-01

    Single-site polymerization catalysts enable exquisite control over alkene polymerization reactions to produce new materials with unique properties. Knowledge of catalyst speciation and fundamental kinetics are essential for full mechanistic understanding of zirconocene-catalyzed alkene polymerization. Currently the effect of activators on fundamental polymerization steps is not understood. Progress in understanding activator effects requires determination of fundamental kinetics for zirconoce...

  16. Method of preparing water purification membranes. [polymerization of allyl amine as thin films in plasma discharge

    Science.gov (United States)

    Hollahan, J. R.; Wydeven, T. J., Jr. (Inventor)

    1974-01-01

    Allyl amine and chemically related compounds are polymerized as thin films in the presence of a plasma discharge. The monomer compound can be polymerized by itself or in the presence of an additive gas to promote polymerization and act as a carrier. The polymerized films thus produced show outstanding advantages when used as reverse osmosis membranes.

  17. Ethylene polymerization kinetics with a heteregeneous catalyst - Comparison of gas and slurry phases

    NARCIS (Netherlands)

    Bergstra, M.F.; Weickert, G.

    2005-01-01

    Ethylene homopolymerizations were executed with a supported Ind2ZrCl2/MAO catalyst using the so-called Reactive Bed Preparation method. This RBP method combined a slurry polymerization with a gas phase polymerization with the same polymerizing particles, i.e., a reactive bed. Polymerization kinetics

  18. In-situ polymerization PLOT columns I: divinylbenzene

    Science.gov (United States)

    Shen, T. C.

    1992-01-01

    A novel method for preparation of porous-layer open-tubular (PLOT) columns is described. The method involves a simple and reproducible, straight-forward in-situ polymerization of monomer directly on the metal tube.

  19. Kinetic polymerization behavior of fluorinated monomers for dental use.

    Science.gov (United States)

    Kadoma, Yoshinori

    2010-10-01

    The kinetic polymerization behavior of 2,2,2-trifluoroethyl methacrylate (TFEMA), 1,1,1,3,3,3-hexafluoroisopropyl methacrylate (HFIPMA), 2,2,2-trifluoroethyl acrylate (TFEA) and 1,1,1,3,3,3-hexafluoroisopropyl acrylate (HFIPA) was determined by isothermal differential scanning calorimetry (DSC) and high-performance liquid chromatography (HPLC) in order to improve the properties of fluorinated powder-liquid adhesive resins. Conversion and heat of polymerization were calculated, and the solubility of the homopolymers in common solvents was examined. Comparison of their polymerization reactivity with that of MMA revealed that the overall rate of polymerization initiated by benzoyl peroxide (BPO) decreased in the order TFEA>MMA>TFEMA>HFIPA>HFIPMA. Based on the retention time of the monomer determined by HPLC, the hydrophobicity of the monomers was found to increase in the order MMAadhesive resins.

  20. Emulsion Polymerization of Butyl Acrylate: Spin Trapping and EPR Study

    Science.gov (United States)

    Kim, S.; Westmoreland, D.

    1994-01-01

    The propagating radical in the emulsion polymerization reaction of butyl acrylate was detected by Electron Paramagnetic Resonance spectroscopy using two spin trapping agents, 2-methyl-2nitrosopropane and alpha -N-tert-butylnitrone.

  1. Structural Analysis of Ciprofloxacin-Carbopol Polymeric Composites ...

    African Journals Online (AJOL)

    Erah

    ) spectroscope interfaced with an infrared (IR) microscope ... Keywords: Ciprofloxacin, X-ray diffraction, Fourier transform infrared, Carbopol,. Polymeric composites ..... Qiu Y, Park K. Environment-sensitive hydrogels for drug delivery. Adv Drug ...

  2. Polymeric peptide pigments with sequence-encoded properties

    NARCIS (Netherlands)

    Lampel, Ayala; McPhee, Scott A.; Park, Hang-Ah; Scott, Gary K.; Humagain, Sunita; Hekstra, Doeke R.; Yoo, Barney; Frederix, Pim W. J. M.; Li, Tai-De; Abzalimov, Rinat R.; Greenbaum, Steven G.; Tuttle, Tell; Hu, Chunhua; Bettinger, Christopher J.; Ulijn, Rein V.

    2017-01-01

    Melanins are a family of heterogeneous polymeric pigments that provide ultraviolet (UV) light protection, structural support, coloration, and free radical scavenging. Formed by oxidative oligomerization of catecholic small molecules, the physical properties of melanins are influenced by covalent and

  3. Highly reflective polymeric substrates functionalized utilizing atomic layer deposition

    Energy Technology Data Exchange (ETDEWEB)

    Zuzuarregui, Ana, E-mail: a.zuzuarregui@nanogune.eu; Gregorczyk, Keith E. [CIC Nanogune Consolider, de Tolosa Hiribidea 76, 20018 San Sebastián (Spain); Coto, Borja; Ruiz de Gopegui, Unai; Barriga, Javier [IK4-Tekniker, Iñaki Goenaga 5, 20600 Eibar (Spain); Rodríguez, Jorge [Torresol Energy (SENER Group), Avda. de Zugazarte 61, 48930 Las Arenas (Spain); Knez, Mato [CIC Nanogune Consolider, de Tolosa Hiribidea 76, 20018 San Sebastián (Spain); IKERBASQUE Basque Foundation for Science, Maria Diaz de Haro 3, 48013 Bilbao (Spain)

    2015-08-10

    Reflective surfaces are one of the key elements of solar plants to concentrate energy in the receivers of solar thermal electricity plants. Polymeric substrates are being considered as an alternative to the widely used glass mirrors due to their intrinsic and processing advantages, but optimizing both the reflectance and the physical stability of polymeric mirrors still poses technological difficulties. In this work, polymeric surfaces have been functionalized with ceramic thin-films by atomic layer deposition. The characterization and optimization of the parameters involved in the process resulted in surfaces with a reflection index of 97%, turning polymers into a real alternative to glass substrates. The solution we present here can be easily applied in further technological areas where seemingly incompatible combinations of polymeric substrates and ceramic coatings occur.

  4. Methods for the Chemical Analysis of Degradable Synthetic Polymeric Biomaterials

    NARCIS (Netherlands)

    Ghaffar, A.; Schoenmakers, P.J.; van der Wal, Sj.

    2014-01-01

    The performance of biodegradable polymeric systems strongly depends on their physical as well as on their chemical properties. Therefore, detailed chemical analysis of such systems is essential. Enzymatic and chemical hydrolysis are the primary biodegradation mechanisms for these materials. This

  5. Extraction of structural extracellular polymeric substances from aerobic granular sludge

    NARCIS (Netherlands)

    Felz, S.; Al-zuhairy, S.H.K.; Aarstad, Olav Andreas; van Loosdrecht, Mark C.M.; Lin, Y.

    2016-01-01

    To evaluate and develop methodologies for the extraction of gel-forming extracellular polymeric substances (EPS), EPS from aerobic granular sludge (AGS) was extracted using six different methods (centrifugation, sonication, ethylenediaminetetraacetic acid (EDTA), formamide with sodium hydroxide

  6. Extraction, quantification and degree of polymerization of yacon ...

    African Journals Online (AJOL)

    Extraction, quantification and degree of polymerization of yacon (Smallanthus sonchifolia) fructans. EWN da Fonseca Contado, E de Rezende Queiroz, DA Rocha, RM Fraguas, AA Simao, LNS Botelho, A de Fatima Abreu, MABCMP de Abreu ...

  7. Novel polymeric nanocomposites and porous materials prepared using organogels

    Energy Technology Data Exchange (ETDEWEB)

    Lai, Wei-Chi; Tseng, Shen-Chen, E-mail: wclai@mail.tku.edu.t [Department of Chemical and Materials Engineering, Tamkang University, 151 Ying-chuan Road, Tamsui, Taipei 25137, Taiwan (China)

    2009-11-25

    We propose a new method for preparing polymeric nanocomposites and porous materials using self-assembled templates formed by 1,3:2,4-dibenzylidene sorbitol (DBS) organogels. DBS is capable of self-assembling into a 3D nanofibrillar network at relatively low concentrations in some organic solvents to produce organogels. In this study, we induced the formation of such physical cross-linked networks in styrene. Subsequently, we polymerized the styrene in the presence of chemical cross-linkers, divinyl benzene (DVB), with different amounts of DBS using thermal-initiated polymerization. The resulting materials were transparent, homogeneous polystyrene (PS) nanocomposites with both physical and chemical cross-links. The porous polymeric materials were obtained by solvent extraction of the DBS nanofibrils from the PS. Brunauer-Emmett-Teller (BET) measurements show that the amounts of DBS and DVB influenced the specific surface area after the removal of the DBS fibrils.

  8. Free-radical solution-polymerization of trifluoronitrosomethane with tetrafluoroethylene

    Science.gov (United States)

    Gdickman, S. A.

    1972-01-01

    Heavy-walled glass reactor, equipped with aerosol-compatible couplings and needle valve and charged with solvent and initiator, is utilized for polymerization. Polymer conversions and reactor/vessel operation are discussed.

  9. Modeling Monomer Transport by Convection during Olefin Polymerization

    NARCIS (Netherlands)

    Parasu Veera, U.; Weickert, G.; Agarwal, U.S.

    2002-01-01

    During olefin polymerization on heterogeneous catalyst, a catalyst particle undergoes fragmentation, and the formed polymer gets deposited on the fragments. These polymer-coated fragments (microparticles) together form a porous polymer particle (macroparticle). The multigrain model (MGM) gives a

  10. Catalytic Production of Olefin Block Copolymers via Chain Shuttling Polymerization

    National Research Council Canada - National Science Library

    Daniel J. Arriola; Edmund M. Carnahan; Phillip D. Hustad; Roger L. Kuhlman; Timothy T. Wenzel

    2006-01-01

    ...-olefin to ethylene in the two types of blocks. The system uses a chain shuttling agent to transfer growing chains between two distinct catalysts with different monomer selectivities in a single polymerization reactor...

  11. Polymeric Nanoparticles via Noncovalent Cross-Linking of Linear Chains

    NARCIS (Netherlands)

    Seo, Myungeun; Beck, Benjamin J.; Paulusse, Jos Marie Johannes; Hawker, Craig J.; Kim, Sang Youl

    2008-01-01

    Novel polymeric nanoparticles were prepared through the chain collapse of linear polymers driven by noncovalent cross-linking of dendritic self-complementary hydrogen-bonding units (SHB). Random copolymers containing SHB units, poly[(methyl

  12. Design Strategies for Fluorescent Biodegradable Polymeric Biomaterials.

    Science.gov (United States)

    Zhang, Yi; Yang, Jian

    2013-01-14

    The marriage of biodegradable polymer and fluorescent imaging has resulted in an important area of polymeric biomaterials: biodegradable fluorescent polymers. Researchers have put significant efforts on developing versatile fluorescent biomaterials due to their promising in biological/biomedical labeling, tracking, monitoring, imaging, and diagnostic applications, especially in drug delivery, tissue engineering, and cancer imaging applications. Biodegradable fluorescent polymers can function not only as implant biomaterials but also as imaging probes. Currently, there are two major classes of biodegradable polymers used as fluorescent materials. The first class is the combination of non-fluorescent biodegradable polymers and fluorescent agents such as organic dyes and quantum dots. Another class of polymers shows intrinsic photoluminescence as polymers by themselves carrying integral fluorescent chemical structures in or pendent to their polymer backbone, such as Green Fluorescent protein (GFP), and the recently developed biodegradable photoluminescent polymer (BPLP). Thus there is no need to conjugate or encapsulate additional fluorescent materials for the latter. In the present review, we will review the fluorescent biodegradable polymers with emphases on material fluorescence mechanism, design criteria for fluorescence, and their cutting-edge applications in biomedical engineering. We expect that this review will provide insightful discussion on the fluorescent biomaterial design and lead to innovations for the development of the next generation of fluorescent biomaterials and fluorescence-based biomedical technology.

  13. Design Strategies for Fluorescent Biodegradable Polymeric Biomaterials

    Science.gov (United States)

    Zhang, Yi; Yang, Jian

    2013-01-01

    The marriage of biodegradable polymer and fluorescent imaging has resulted in an important area of polymeric biomaterials: biodegradable fluorescent polymers. Researchers have put significant efforts on developing versatile fluorescent biomaterials due to their promising in biological/biomedical labeling, tracking, monitoring, imaging, and diagnostic applications, especially in drug delivery, tissue engineering, and cancer imaging applications. Biodegradable fluorescent polymers can function not only as implant biomaterials but also as imaging probes. Currently, there are two major classes of biodegradable polymers used as fluorescent materials. The first class is the combination of non-fluorescent biodegradable polymers and fluorescent agents such as organic dyes and quantum dots. Another class of polymers shows intrinsic photoluminescence as polymers by themselves carrying integral fluorescent chemical structures in or pendent to their polymer backbone, such as Green Fluorescent protein (GFP), and the recently developed biodegradable photoluminescent polymer (BPLP). Thus there is no need to conjugate or encapsulate additional fluorescent materials for the latter. In the present review, we will review the fluorescent biodegradable polymers with emphases on material fluorescence mechanism, design criteria for fluorescence, and their cutting-edge applications in biomedical engineering. We expect that this review will provide insightful discussion on the fluorescent biomaterial design and lead to innovations for the development of the next generation of fluorescent biomaterials and fluorescence-based biomedical technology. PMID:23710326

  14. Mechanisms of fibrin polymerization and clinical implications.

    Science.gov (United States)

    Weisel, John W; Litvinov, Rustem I

    2013-03-07

    Research on all stages of fibrin polymerization, using a variety of approaches including naturally occurring and recombinant variants of fibrinogen, x-ray crystallography, electron and light microscopy, and other biophysical approaches, has revealed aspects of the molecular mechanisms involved. The ordered sequence of fibrinopeptide release is essential for the knob-hole interactions that initiate oligomer formation and the subsequent formation of 2-stranded protofibrils. Calcium ions bound both strongly and weakly to fibrin(ogen) have been localized, and some aspects of their roles are beginning to be discovered. Much less is known about the mechanisms of the lateral aggregation of protofibrils and the subsequent branching to yield a 3-dimensional network, although the αC region and B:b knob-hole binding seem to enhance lateral aggregation. Much information now exists about variations in clot structure and properties because of genetic and acquired molecular variants, environmental factors, effects of various intravascular and extravascular cells, hydrodynamic flow, and some functional consequences. The mechanical and chemical stability of clots and thrombi are affected by both the structure of the fibrin network and cross-linking by plasma transglutaminase. There are important clinical consequences to all of these new findings that are relevant for the pathogenesis of diseases, prophylaxis, diagnosis, and treatment.

  15. Bioactive Polymeric Nanoparticles for Periodontal Therapy.

    Directory of Open Access Journals (Sweden)

    Raquel Osorio

    Full Text Available to design calcium and zinc-loaded bioactive and cytocompatible nanoparticles for the treatment of periodontal disease.PolymP-nActive nanoparticles were zinc or calcium loaded. Biomimetic calcium phosphate precipitation on polymeric particles was assessed after 7 days immersion in simulated body fluid, by scanning electron microscopy attached to an energy dispersive analysis system. Amorphous mineral deposition was probed by X-ray diffraction. Cell viability analysis was performed using oral mucosa fibroblasts by: 1 quantifying the liberated deoxyribonucleic acid from dead cells, 2 detecting the amount of lactate dehydrogenase enzyme released by cells with damaged membranes, and 3 by examining the cytoplasmic esterase function and cell membranes integrity with a fluorescence-based method using the Live/Dead commercial kit. Data were analyzed by Kruskal-Wallis and Mann-Whitney tests.Precipitation of calcium and phosphate on the nanoparticles surfaces was observed in calcium-loaded nanoparticles. Non-loaded nanoparticles were found to be non-toxic in all the assays, calcium and zinc-loaded particles presented a dose dependent but very low cytotoxic effect.The ability of calcium-loaded nanoparticles to promote precipitation of calcium phosphate deposits, together with their observed non-toxicity may offer new strategies for periodontal disease treatment.

  16. Inorganic Surface Modification of Nonwoven Polymeric Substrates

    Science.gov (United States)

    Halbur, Jonathan Chandler

    In this study, atomic layer deposition (ALD), a vapor phase inorganic thin film deposition technique, is used to modify the surface of a range of industrially relevant polymers to enhance surface properties or impart additional functionalities. Several unique demonstrations of polymer surface modification are presented including uniform nanomaterial photodeposition to the surface of nonowoven fabrics and the first application of photocatalytic thin film coated nonwovens for advanced filtration of heavy metals from solution. Recent advances in polymer synthesis and processing technologies have resulted in the production of novel polymer systems with unique chemistries and sub-micron scale dimensions. As a result, advanced fiber systems have received much attention for potential use in a wide range of industrially and medically important applications such as advanced and selective filtration, catalysis, flexible electronics, and tissue engineering. However, tailoring the surface properties of the polymer is still needed in order to realize the full range of advanced applications, which can be difficult given the high complexity and non-uniformity of nonwoven polymeric structures. Uniform and controllable inorganic surface modification of nonwovens allows the introduction or modification of many crucial polymer properties with a wide range of application methods.

  17. Polymeric Biodegradable Stent Insertion in the Esophagus

    Directory of Open Access Journals (Sweden)

    Kai Yang

    2016-04-01

    Full Text Available Esophageal stent insertion has been used as a well-accepted and effective alternative to manage and improve the quality of life for patients diagnosed with esophageal diseases and disorders. Current stents are either permanent or temporary and are fabricated from either metal or plastic. The partially covered self-expanding metal stent (SEMS has a firm anchoring effect and prevent stent migration, however, the hyperplastic tissue reaction cause stent restenosis and make it difficult to remove. A fully covered SEMS and self-expanding plastic stent (SEPS reduced reactive hyperplasia but has a high migration rate. The main advantage that polymeric biodegradable stents (BDSs have over metal or plastic stents is that removal is not require and reduce the need for repeated stent insertion. But the slightly lower radial force of BDS may be its main shortcoming and a post-implant problem. Thus, strengthening support of BDS is a content of the research in the future. BDSs are often temporarily effective in esophageal stricture to relieve dysphagia. In the future, it can be expect that biodegradable drug-eluting stents (DES will be available to treat benign esophageal stricture, perforations or leaks with additional use as palliative modalities for treating malignant esophageal stricture, as the bridge to surgery or to maintain luminal patency during neoadjuvant chemoradiation.

  18. Transfer coating by electron initiated polymerization

    Science.gov (United States)

    Nablo, Sam V.

    The high speed and depth of cure possible with electron initiated monomer/oligomer coating systems provide many new opportunities for approaches to product finishing. Moreover, the use of transfer or cast coating using films or metallic surfaces offers the ability to precisely control the surface topology of liquid film surfaces during polymerization. Transfer coating such as with textiles has been a commercial process for many years and the synergistic addition of EB technology permits the manufacture of unusual new products. One of these, the casting paper used in the manufacture of vinyl and urethane fabrics, is the first EB application to use a drum surface for pattern replication in the coating. In this case the coated paper is cured against, and then released from, an engraved drum surface. Recent developments in the use of plastic films for transfer have been applied to the manufacture of transfer metallized and coated paper and paperboard products for packaging. Details of these and related processes will be presented as well as a discussion of the typical product areas (e.g. photographic papers, release papers, magnetic media) using this high speed transfer technology.

  19. Intermolecular Structural Change for Thermoswitchable Polymeric Photosensitizer

    Energy Technology Data Exchange (ETDEWEB)

    Park, Wooram; Park, Sin-Jung [Center; Cho, Soojeong; Shin, Heejun [Center; Jung, Young-Seok [Center; Lee, Byeongdu [X-ray; Na, Kun [Center; Kim, Dong-Hyun

    2016-08-17

    A switchable photosensitizer (PS), which can be activated at a spe-cific condition beside light, has tremendous advantages for photo-dynamic therapy (PDT). Herein, we developed a thermo-switchable polymeric photosensitizer (T-PPS) by conjugating PS (Pheophor-bide-a, PPb-a) to a temperature-responsive polymer backbone of biocompatible hydroxypropyl cellulose (HPC). Self-quenched PS molecules linked in close proximity by pi-pi stacking in T-PPS were easily transited to an active monomeric state by the tempera-ture induced phase transition of polymer backbones. The tempera-ture responsive inter-molecular interaction changes of PS molecules in T-PPS were demonstrated in synchrotron small-angle X-ray scattering (SAXS) and UV-Vis spectrophotometer analysis. The T-PPS allowed switchable activation and synergistically enhanced cancer cell killing effect at the hyperthermia temperature (45 °C). Our developed T-PPS has the considerable potential not only as a new class of photomedicine in clinics but also as a biosensor based on temperature responsiveness.

  20. BIORESORBABLE POLYMERIC MENISCAL PROSTHESIS: STUDY IN RABBITS

    Science.gov (United States)

    Cardoso, Tulio Pereira; de Rezende Duek, Eliana Aparecida; Amatuzzi, Marco Martins; Caetano, Edie Benedito

    2015-01-01

    Objective: To induce growth of a neomeniscus into the pores of a prosthesis in order to protect the knee joint cartilage. Methods: 70 knees of 35 New Zealand rabbits were operated. The rabbits were five to seven months old, weighed 2 to 3.8 kilograms, and 22 were male and 13 were female. Each animal underwent medial meniscectomy in both knees during a single operation. A bioabsorbable polymeric meniscal prosthesis composed of 70% polydioxanone and 30% L-lactic acid polymer was implanted in one side. The animals were sacrificed after different postoperative time intervals. The femoral condyles and neomeniscus were subjected to histological analysis. Histograms were used to measure the degradation and absorption of the prosthesis, the growth of meniscal tissue in the prosthesis and the degree of degradation of the femoral condyle joint cartilage. Results: The data obtained showed that tissue growth histologically resembling a normal meniscus occurred, with gradual absorption of the prosthesis, and the percentages of chondrocytes on the control side and prosthesis side. Conclusion: Tissue growth into the prosthesis pores that histologically resembled the normal rabbit meniscus was observed. The joint cartilage of the femoral condyles on the prosthesis side presented greater numbers of chondrocytes in all its layers. PMID:27022549

  1. Electro-optic Charon polymeric microring modulators.

    Science.gov (United States)

    Rezzonico, Daniele; Jazbinsek, Mojca; Guarino, Andrea; Kwon, O-Pil; Günter, Peter

    2008-01-21

    We propose and demonstrate a new type of electro-optic polymeric microring resonators, where the shape of the transmission spectrum is controlled by losses and phase shifts induced at the asymmetric directional coupler between the cavity and the bus waveguide. The theoretical analysis of such Charon microresonators shows, depending on the coupler design, three different transmission characteristics: normal Lorentzian dips, asymmetric Fano resonances, and Lorentzian peaks. The combination of the active azo-stilbene based polyimide SANDM2 surrounded by the hybrid polymer Ormocomp allowed the first experimental demonstration of electro-optic modulation in Charon microresonators. The low-loss modulators (down to 0.6 dB per round trip), with a radius of 50 microm, were produced by micro-embossing and exhibit either highly asymmetric and steep Fano resonances with large 43-GHz modulation bandwidth or strong resonances with 11-dB extinction ratio. We show that Charon microresonators can lead to 1-V half wave voltage all-polymer micrometer-scale devices with larger tolerances to coupler fabrication limitations and wider modulation bandwidths than classical ring resonators.

  2. Bioactive Polymeric Nanoparticles for Periodontal Therapy.

    Science.gov (United States)

    Osorio, Raquel; Alfonso-Rodríguez, Camilo Andrés; Medina-Castillo, Antonio L; Alaminos, Miguel; Toledano, Manuel

    2016-01-01

    to design calcium and zinc-loaded bioactive and cytocompatible nanoparticles for the treatment of periodontal disease. PolymP-nActive nanoparticles were zinc or calcium loaded. Biomimetic calcium phosphate precipitation on polymeric particles was assessed after 7 days immersion in simulated body fluid, by scanning electron microscopy attached to an energy dispersive analysis system. Amorphous mineral deposition was probed by X-ray diffraction. Cell viability analysis was performed using oral mucosa fibroblasts by: 1) quantifying the liberated deoxyribonucleic acid from dead cells, 2) detecting the amount of lactate dehydrogenase enzyme released by cells with damaged membranes, and 3) by examining the cytoplasmic esterase function and cell membranes integrity with a fluorescence-based method using the Live/Dead commercial kit. Data were analyzed by Kruskal-Wallis and Mann-Whitney tests. Precipitation of calcium and phosphate on the nanoparticles surfaces was observed in calcium-loaded nanoparticles. Non-loaded nanoparticles were found to be non-toxic in all the assays, calcium and zinc-loaded particles presented a dose dependent but very low cytotoxic effect. The ability of calcium-loaded nanoparticles to promote precipitation of calcium phosphate deposits, together with their observed non-toxicity may offer new strategies for periodontal disease treatment.

  3. Polymeric Bladder for Storing Liquid Oxygen

    Science.gov (United States)

    Walker, David H.; Harvey, Andrew C.; Leary, William

    2009-01-01

    A proposed system for storing oxygen in liquid form and dispensing it in gaseous form is based on (1) initial subcooling of the liquid oxygen; (2) containing the liquid oxygen in a flexible vessel; (3) applying a gas spring to the flexible vessel to keep the oxygen compressed above the saturation pressure and, thus, in the liquid state; and (4) using heat leakage into the system for vaporizing the oxygen to be dispensed. In a typical prior system based on these principles, the flexible vessel is a metal bellows housed in a rigid tank, and the gas spring consists of pressurized helium in the tank volume surrounding the bellows. Unfortunately, the welds in the bellows corrugations are subject to fatigue, and, because bellows have large ullage, a correspondingly large fraction of the oxygen content cannot be expelled. In the proposed system, the flexible vessel would be a bladder made of a liquid- crystal polymer (LCP). (LCPs are strong and compatible with liquid oxygen.) In comparison with a metal bellows, a polymeric bladder would have less ullage and would weigh less. In experiments involving fatigue cycling at liquid-nitrogen temperatures, two LCPs were found to be suitable for this application.

  4. Polymeric and Ceramic Nanoparticles in Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Aura-Ileana Moreno-Vega

    2012-01-01

    Full Text Available Materials in the nanometer size range may possess unique and beneficial properties, which are very useful for different medical applications including stomatology, pharmacy, and implantology tissue engineering. The application of nanotechnology to medicine, known as nanomedicine, concerns the use of precisely engineered materials at this length scale to develop novel therapeutic and diagnostic modalities. Nanomaterials have unique physicochemical properties, such as small size, large surface area to mass ratio, and high reactivity, which are different from bulk materials of the same composition. Polymeric and ceramic nanoparticles have been extensively studied as particulate carriers in the pharmaceutical and medical fields, because they show promise as drug delivery systems as a result of their controlled- and sustained-release properties, subcellular size, and biocompatibility with tissue and cells. These properties can be used to overcome some of the limitations found in traditional therapeutic and diagnostic agents. Nanotechnology is showing promising developments in many areas and may benefit our health and welfare. However, a wide range of ethical issues has been raised by this innovative science. Many authorities believe that these advancements could lead to irreversible disasters if not limited by ethical guidelines.

  5. Protein Compatible Polymer Brushes on Polymeric Substrates Prepared by Surface-Initiated Transfer Radica Polymerization

    DEFF Research Database (Denmark)

    Fristrup, Charlotte Juel; Eskimergen, Rüya; Burkrinsky, J.T.

    2008-01-01

    limited. Therefore, a polymer coating containing some of the required properties may expand the use ofpolymers in medical devices. 'The approach was to graft polymer brushes from initiator-functionalized substrates using Surface-Initiated Atom TnlJlsfer Radical Polymerization (SI ATRP). Initial studies......Materials for insulin containers and delivery systems should comply with requirements like compatibility with proteins, sterilisability, 'good barrier properties towards preservatives, and no toxic leachables. The number of commercially available polymer materials which can be u sed is rather...

  6. In situ electron-beam polymerization stabilized quantum dot micelles.

    Science.gov (United States)

    Travert-Branger, Nathalie; Dubois, Fabien; Renault, Jean-Philippe; Pin, Serge; Mahler, Benoit; Gravel, Edmond; Dubertret, Benoit; Doris, Eric

    2011-04-19

    A polymerizable amphiphile polymer containing PEG was synthesized and used to encapsulate quantum dots in micelles. The quantum dot micelles were then polymerized using a "clean" electron beam process that did not require any post-irradiation purification. Fluorescence spectroscopy revealed that the polymerized micelles provided an organic coating that preserved the quantum dot fluorescence better than nonpolymerized micelles, even under harsh conditions. © 2011 American Chemical Society

  7. Electrical and optical properties of monomeric and polymerized fullerenes. Review

    CERN Document Server

    Makarova, T L

    2001-01-01

    Paper presents the survey of properties of monomeric and polymerized fullerenes as materials with semiconducting zone structures. Electronic structure of fullerenes is studied in detail. One analyzes the absorption spectra of fullerenes. Paper contains data on the transport parameters of fullerenes and discusses, as well, models of conductivity in these materials. Peculiar attention is given to the processes occurring in fullerenes under polymerization through photoexcitation, charge transfer and pressure

  8. Impact of competitive processes on controlled radical polymerization

    OpenAIRE

    Ballard N.; Rusconi S.; Akhmatskaya E.; Sokolovski D.; de La Cal J.C.; Asua J.M.

    2014-01-01

    The kinetics of radical polymerization have been systematically studied for nearly a century and in general are well understood. However, in light of recent developments in controlled radical polymerization many kinetic anomalies have arisen. These unexpected results have been largely considered separate, and various, as yet inconclusive, debates as to the cause of these anomalies are ongoing. Herein we present a new theory on the cause of changes in kinetics under controlled radical polymeri...

  9. Reducing the gel effect in free radical polymerization

    OpenAIRE

    Janssen, L. P. B. M.; Hoffmann, A.C; Cioffi, M.

    2001-01-01

    The gel effect is a phenomenon that often takes place during a free radical polymerization at intermediate or high degrees of conversion. It consists of the autoacceleration of the rate of the polymerization and it is due to diffusion limitations that slow down the termination reaction leaving the propagation and the initiation reactions unaffected. This phenomenon is highly undesired in industrial application because it causes a fast and dramatic increase of the temperature of the reacting m...

  10. Synthesis of Amphiphilic Copolymwers by Atom Transfer Radical Polymerization

    DEFF Research Database (Denmark)

    Hansen, Natanya Majbritt Louie

    2007-01-01

    Fluorerede polymerer besidder en række enestående egenskaber såsom god biokom-patibilitet og lav overfladeenergi såvel som god kemisk og termisk stabilitet. Målsæt-ningen for denne afhandling var at fremstille fluorerede polymerer og copolymerer, der potentielt kunne finde anvendelse som biokompa...... luftfugtighed fra copolymerer af 3FM og MMA, hvilket resulterede i meget hydrofobe overflader med statiske kontaktvinkler for vand på op til 144°....

  11. Hemoglobin and Red Blood Cells Catalyze Atom Transfer Radical Polymerization

    OpenAIRE

    Silva Tilana B.; Spulber Mariana; Kocik Marzena K.; Seidi Farzad; Charan Himanshu; Rother Martin; Sigg Severin J.; Renggli Kasper; Kali Gergely; Bruns Nico

    2013-01-01

    Hemoglobin (Hb) is a promiscuous protein that not only transports oxygen but also catalyzes several biotransformations. A novel in vitro catalytic activity of Hb is described. Bovine Hb and human erythrocytes were found to display ATRPase activity i.e. they catalyzed the polymerization of vinyl monomers under conditions typical for atom transfer radical polymerization (ATRP). N isopropylacrylamide (NIPAAm) poly(ethylene glycol) methyl ether acrylate (PEGA) and poly(ethylene glycol) methyl eth...

  12. Antimicrobial Polymeric Materials with Quaternary Ammonium and Phosphonium Salts

    OpenAIRE

    Yan Xue; Huining Xiao; Yi Zhang

    2015-01-01

    Polymeric materials containing quaternary ammonium and/or phosphonium salts have been extensively studied and applied to a variety of antimicrobial-relevant areas. With various architectures, polymeric quaternary ammonium/phosphonium salts were prepared using different approaches, exhibiting different antimicrobial activities and potential applications. This review focuses on the state of the art of antimicrobial polymers with quaternary ammonium/phosphonium salts. In particular, it discusses...

  13. Comparison Between Standard and Pulsed Coherent Light Polymerization

    OpenAIRE

    Šutalo, Zrinka; Meniga, Andrej; Šutalo, Jozo; Azinović, Davorka; Pichler, Goran

    1993-01-01

    An ever growing amount of photo-curable materials is being used in different fields of dentistry. Standard photopolymerization devices produce about 60% o f monomer conversion in composite resin fillings. In order to improve the quality of polymerization, a series of experiments was made using pulsed laser, because continuous coherent light leads to a higher polymerization shrinkage caused by a temperature rise in the material. Three different experiments were carried out with different shade...

  14. Microbial extracellular polymeric substances in marine biogeochemical processes

    Digital Repository Service at National Institute of Oceanography (India)

    Bhaskar, P.V.; Bhosle, N.B.

    CURRENT SCIENCE, VOL. 88, NO. 1, 10 JANUARY 2005 45 *For correspondence. (e-mail: pbhaskar@darya.nio.org) Microbial extracellular polymeric substances in marine biogeochemical processes P. V. Bhaskar1,2,* and Narayan B. Bhosle1 1Chemical... Oceanography Division, and 2Marine Corrosion and Materials Research Division, National Institute of Oceanography, Dona Paula, Goa 403 004, India Microbial extracellular polymeric substances (EPS) are widely distributed in marine environments...

  15. Spectroscopic ellipsometry characterization of coatings on biaxially anisotropic polymeric substrates

    Science.gov (United States)

    Hilfiker, James N.; Pietz, Brandon; Dodge, Bill; Sun, Jianing; Hong, Nina; Schoeche, Stefan

    2017-11-01

    Spectroscopic ellipsometry characterization of coatings on polymeric substrates can be challenging due to the substrate optical anisotropy. We compare four characterization strategies for thin coating layers on anisotropic polymeric substrates with regard to accuracy of the resulting layer thickness and coating optical constants. Each strategy differs in measured data type, model construction, implementation complexity, and inherent capabilities and sensitivity to the coating properties. Best practices and limitations are discussed for each strategy.

  16. Thought Evolution

    Directory of Open Access Journals (Sweden)

    Shadrikov V.D.

    2015-08-01

    Full Text Available The thought evolution is studied by historical reconstruction method that is based on the propositions of the theory of culturalhistorical determination of the psyche development, and the data of the morphological analysis and child development, and the conception of the psyche neuroontogenesis. The grounds for advisability of protothinking are presented. The protothinking is understood as the use of objective thought in cases of awareness absence. It is shown that protothinking is a form of transition from animal thinking to human speech. The particular attention is paid to the process of the word producing and thought generation in that process. The conditions of word producing as cooccurring acoustic pattern served for though expression are discussed. It is emphasized that a word is produced by a particular person. The historical development of the language and the specificity of this development are pointed out

  17. Recent progress of atomic layer deposition on polymeric materials.

    Science.gov (United States)

    Guo, Hong Chen; Ye, Enyi; Li, Zibiao; Han, Ming-Yong; Loh, Xian Jun

    2017-01-01

    As a very promising surface coating technology, atomic layer deposition (ALD) can be used to modify the surfaces of polymeric materials for improving their functions and expanding their application areas. Polymeric materials vary in surface functional groups (number and type), surface morphology and internal structure, and thus ALD deposition conditions that typically work on a normal solid surface, usually do not work on a polymeric material surface. To date, a large variety of research has been carried out to investigate ALD deposition on various polymeric materials. This paper aims to provide an in-depth review of ALD deposition on polymeric materials and its applications. Through this review, we will provide a better understanding of surface chemistry and reaction mechanism for controlled surface modification of polymeric materials by ALD. The integrated knowledge can aid in devising an improved way in the reaction between reactant precursors and polymer functional groups/polymer backbones, which will in turn open new opportunities in processing ALD materials for better inorganic/organic film integration and potential applications. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Two Photon Polymerization of Microneedles for Transdermal Drug Delivery

    Science.gov (United States)

    Gittard, Shaun D.; Ovsianikov, Aleksandr; Chichkov, Boris N.; Doraiswamy, Anand; Narayan, Roger J.

    2010-01-01

    Importance of the field Microneedles are small-scale devices that are finding use for transdermal delivery of protein-based pharmacologic agents and nucleic acid-based pharmacologic agents; however, microneedles prepared using conventional microelectronics-based technologies have several shortcomings, which have limited translation of these devices into widespread clinical use. Areas covered in this review Two photon polymerization is a laser-based rapid prototyping technique that has been recently used for direct fabrication of hollow microneedles with a wide variety of geometries. In addition, an indirect rapid prototyping method that involves two photon polymerization and polydimethyl siloxane micromolding has been used for fabrication of solid microneedles with exceptional mechanical properties. What the reader will gain In this review, the use of two photon polymerization for fabricating in-plane and out-of-plane hollow microneedle arrays is described. The use of two photon polymerization-micromolding for fabrication of solid microneedles is also reviewed. In addition, fabrication of microneedles with antimicrobial properties is discussed; antimicrobial microneedles may reduce the risk of infection associated with formation of channels through the stratum corneum. Take home message It is anticipated that the use of two photon polymerization as well as two photon polymerization-micromolding for fabrication of microneedles and other microstructured drug delivery devices will increase over the coming years. PMID:20205601

  19. Two-photon polymerization of microneedles for transdermal drug delivery.

    Science.gov (United States)

    Gittard, Shaun D; Ovsianikov, Aleksandr; Chichkov, Boris N; Doraiswamy, Anand; Narayan, Roger J

    2010-04-01

    Microneedles are small-scale devices that are finding use for transdermal delivery of protein-based pharmacologic agents and nucleic acid-based pharmacologic agents; however, microneedles prepared using conventional microelectronics-based technologies have several shortcomings, which have limited translation of these devices into widespread clinical use. Two-photon polymerization is a laser-based rapid prototyping technique that has been used recently for direct fabrication of hollow microneedles with a wide variety of geometries. In addition, an indirect rapid prototyping method that involves two-photon polymerization and polydimethyl siloxane micromolding has been used for fabrication of solid microneedles with exceptional mechanical properties. In this review, the use of two-photon polymerization for fabricating in-plane and out-of-plane hollow microneedle arrays is described. The use of two-photon polymerization-micromolding for fabrication of solid microneedles is also reviewed. In addition, fabrication of microneedles with antimicrobial properties is discussed; antimicrobial microneedles may reduce the risk of infection associated with the formation of channels through the stratum corneum. It is anticipated that the use of two-photon polymerization as well as two-photon polymerization-micromolding for fabrication of microneedles and other microstructured drug delivery devices will increase over the coming years.

  20. Morphological characteristics of polypyrrole film fabricated by electrochemical polymerization

    Science.gov (United States)

    Kim, Dongbok; Kim, Jihong; Ha, Sang-Wook; Cho, Hyunwoo; Lee, Seung-Ki; Pak, James J.

    2004-07-01

    The morphological characteristics such as surface area, thickness, and roughness of the Polypyrrole (PPy) on metal electrodes of electrochemical sensors affect sensitivity and selectivity of electrochemical sensors because the surface morphology of PPy affects reduction and oxidation of the electrodes. The PPy morphology was investigated by changing several polymerization parameters such as polymerization time, electrolytes, and metal electrodes. Indium tin oxide (ITO) or Au was used as a seed metal electrode on which PPy was electropolymerized. The electropolymerization was performed in an electrolyte, either sodium dodecyl sulfate (NaDS) or sodium dodecyl benzene sulfonate (NaDBS). A homogeneous PPy morphology was obtained on ITO electrode when NaDBS solution was used as an electrolyte, but when NaDS solution was used for polymerizing on ITO electrode, the electropolymerized PPy showed uniform surface morphology and film thickness up to 1 min polymerization time while further polymerization resulted in non-uniform networks like a spider web. This increases the detection surface area with identical metal electrodes of electrochemical sensors. When Au was used, neither NaDBS nor NaDS solution resulted in any morphology change of the PPy film regardless of the polymerization time. The effect of the PPy morphology on the electrochemical sensors will also be presented.

  1. LEICA DMC III CALIBRATION AND GEOMETRIC SENSOR ACCURACY

    Directory of Open Access Journals (Sweden)

    C. Mueller

    2016-03-01

    Full Text Available As an evolution of the successful DMC II digital camera series, Leica Geosystems has introduced the Leica DMC III digital aerial camera using, for the first time in the industry, a large-format CMOS sensor as a panchromatic high-resolution camera head. This paper describes the Leica DMC III calibration and its quality assurance and quality control (QA/QC procedures. It will explain how calibration was implemented within the production process for the Leica DMC III camera. Based on many years of experience with the DMC and DMC II camera series, it is know that the sensor flatness has a huge influence on the final achievable results. The Leica DMC III panchromatic CMOS sensor with its 100.3mm x 56.9mm size shows remaining errors in a range of 0.1 to 0.2μm for the root mean square and shows maximum values not higher that 1.0μm. The Leica DMC III is calibrated based on a 5cm Ground Sample Distance (GSD grid pattern flight and evaluated with three different flying heights at 5cm, 8cm and 11cm GSD. The geometric QA/QC has been performed using the calibration field area, as well as using an independent test field. The geometric performance and accuracy is unique and gives ground accuracies far better than the flown GSD.

  2. Effects of the ion-solid interaction in glow discharge vapour deposition polymerization of pyromellitic dianhydride

    Energy Technology Data Exchange (ETDEWEB)

    Maggioni, G. E-mail: maggioni@inl.infn.it; Carturan, S.; Rigato, V.; Pieri, U

    2000-05-02

    Low energy He ion bombardment of pyromellitic dianhydride monomer used in glow discharge vapour deposition polymerization (GDVDP) of polyimide coatings and its effects on the film deposition process have been studied. The sublimation of the monomer molecules and the simultaneous formation of a damaged, carbon-rich surface layer on the target are discussed from a theoretical point of view based on simulations of the ion-solid interaction. Optical emission and mass spectrometry have been used to analyse the species emitted from the target. In order to study the time evolution of the PMDA target damage, the deposition rate of monomer molecules has been monitored. FT-IR spectroscopy has been used to determine the molecular damaging of the target monomer and deposited films.

  3. Magnetic poly(glycidyl methacrylate) microspheres containing maghemite prepared by emulsion polymerization

    Energy Technology Data Exchange (ETDEWEB)

    Pollert, E. [Institute of Physics AS CR, 162 53 Prague 6, Cukrovarnicka 10 (Czech Republic)]. E-mail: pollert@fzu.cb; Knizek, K. [Institute of Physics AS CR, 162 53 Prague 6, Cukrovarnicka 10 (Czech Republic); Marysko, M. [Institute of Physics AS CR, 162 53 Prague 6, Cukrovarnicka 10 (Czech Republic); Zaveta, K. [Institute of Physics AS CR, 162 53 Prague 6, Cukrovarnicka 10 (Czech Republic); Joint Laboratory of Moessbauer Spectroscopy, Faculty of Mathematics and Physics, Charles University, 180 00 Prague 8 (Czech Republic); Lancok, A. [Institute of Physics AS CR, 162 53 Prague 6, Cukrovarnicka 10 (Czech Republic); Joint Laboratory of Moessbauer Spectroscopy, Faculty of Mathematics and Physics, Charles University, 180 00 Prague 8 (Czech Republic); Bohacek, J. [Institute of Inorganic Chemistry, AS CR, 250 68 Rez (Czech Republic); Horak, D. [Institute of Macromolecular Chemistry, AS CR, 162 06 Prague 6 (Czech Republic); Babic, M. [Institute of Macromolecular Chemistry, AS CR, 162 06 Prague 6 (Czech Republic)

    2006-11-15

    Magnetic poly(glycidyl methacrylate) (PGMA) microspheres were prepared by emulsion polymerization of glycidyl methacrylate (GMA) in the presence of (carboxymethyl)dextran (CM-dextran)-stabilized iron oxide colloid. Scanning electron microscope (SEM) and transmission electron microscope (TEM) microstructural studies revealed a spherical shape of the particles in 72-84 nm size range. Magnetic iron oxide nanoparticles (< 10 nm) were partly inside the PGMA microspheres and partly adhering to the microsphere surface. X-ray phase analysis revealed spinel structure of the iron oxide particles. According to the Moessbauer spectra, iron oxide consisted mainly of the maghemite phase. Temperature evolution of the spectra completed by the magnetization measurements confirmed superparamagnetic behavior at room temperature and the transition to the ordered state at lower temperatures. As expected, saturated magnetization increased with increasing content of the maghemite phase in the magnetic PGMA microspheres.

  4. Celestine III and the North

    DEFF Research Database (Denmark)

    Nielsen, Torben Kjersgaard

    2008-01-01

    Artiklen gennemgår pave Cølestin IIIs forhold til de nordiske kongeriger i perioden 1191-1198. Artiklen viser, at paven, som i forskningen traditionelt år har stået i skyggen af sin berømte, energiske og især: yngre efterfølger, Innocens III, har været på forkant med udviklingen i de nordiske rig...

  5. Genetics Home Reference: mucolipidosis III gamma

    Science.gov (United States)

    ... Home Health Conditions Mucolipidosis III gamma Mucolipidosis III gamma Printable PDF Open All Close All Enable Javascript ... view the expand/collapse boxes. Description Mucolipidosis III gamma is a slowly progressive disorder that affects many ...

  6. Preparing polymeric biomaterials using "click" chemistry techniques

    Science.gov (United States)

    Lin, Fei

    Significant efforts have been focused on preparing degradable polymeric biomaterials with controllable properties, which have the potential to stimulate specific cellular responses at the molecular level. Click reactions provide a universal tool box to achieve that goal through molecular level design and modification. This dissertation demonstrates multiple methodologies and techniques to develop advanced biomaterials through combining degradable polymers and click chemistry. In my initial work, a novel class of amino acid-based poly(ester urea)s (PEU) materials was designed and prepared for potential applications in bone defect treatment. PEUs were synthesized via interfacial polycondensation, and showed degradability in vivo and possessed mechanical strength superior to conventionally used polyesters. Further mechanical enhancement was achieved after covalent crosslinking with a short peptide crosslinker derived from osteogenic growth peptide (OGP). The in vitro and in an in vivo subcutaneous rat model demonstrated that the OGP-based crosslinkers promoted proliferative activity of cells and accelerated degradation properties of PEUs. As a continuous study, extra efforts were focused on the development of PEUs with functional pendant groups, including alkyne, azide, alkene, tyrosine phenol, and ketone groups. PEUs with Mw exceeding to 100K Da were obtained via interfacial polycondensation, and the concentration of pendent groups was varied using a copolymerization strategy. Electrospinning was used to fabricate PEU nanofiber matrices with mechanical strengths suitable for tissue engineering. A series of biomolecules were conjugated to nanofiber surface following electrospinning using click reactions in aqueous media. The ability to derivatize PEUs with biological motifs using high efficient chemical reactions will significantly expand their use in vitro and in vivo. Based on similar principles, a series of mono- and multifunctionalized polycaprolactone (PCL

  7. Cyanex based uranyl sensitive polymeric membrane electrodes.

    Science.gov (United States)

    Badr, Ibrahim H A; Zidan, W I; Akl, Z F

    2014-01-01

    Novel uranyl selective polymeric membrane electrodes were prepared using three different low-cost and commercially available Cyanex extractants namely, bis(2,4,4-trimethylpentyl) phosphinic acid [L1], bis(2,4,4-trimethylpentyl) monothiophosphinic acid [L2] and bis(2,4,4-trimethylpentyl) dithiophosphinic acid [L3]. Optimization and performance characteristics of the developed Cyanex based polymer membrane electrodes were determined. The influence of membrane composition (e.g., amount and type of ionic sites, as well as type of plasticizer) on potentiometric responses of the prepared membrane electrodes was studied. Optimized Cyanex-based membrane electrodes exhibited Nernstian responses for UO₂(2+) ion over wide concentration ranges with fast response times. The optimized membrane electrodes based on L1, L2 and L3 exhibited Nernstian responses towards uranyl ion with slopes of 29.4, 28.0 and 29.3 mV decade(-1), respectively. The optimized membrane electrodes based on L1-L3 showed detection limits of 8.3 × 10(-5), 3.0 × 10(-5) and 3.3 × 10(-6) mol L(-1), respectively. The selectivity studies showed that the optimized membrane electrodes exhibited high selectivity towards UO₂(2+) ion over large number of other cations. Membrane electrodes based on L3 exhibited superior potentiometric response characteristics compared to those based on L1 and L2 (e.g., widest linear range and lowest detection limit). The analytical utility of uranyl membrane electrodes formulated with Cyanex extractant L3 was demonstrated by the analysis of uranyl ion in different real samples for nuclear safeguards verification purposes. The results obtained using direct potentiometry and flow-injection methods were compared with those measured using the standard UV-visible and inductively coupled plasma spectroscopic methods. © 2013 Published by Elsevier B.V.

  8. Poly[[hexa?aqua?tris?[?2-2,5-dihy?droxy-1,4-benzoquinona?to(2?)]diholmium(III)] octa?deca?hydrate

    OpenAIRE

    Shin-ichi Ohkoshi; Koji Nakabayashi

    2010-01-01

    In the polymeric title compound, {[Ho2(C6H2O4)3(H2O)6]·18H2O}n, the HoIII ion is nine-coordinated by six O atoms derived from three bidentate 2,5-dihydroxy-1,4-benzoquinonate (DHBQ2−) ligands and three O atoms from three water molecules. The HoIII ions are connected via three ligands, resulting in the formation of a two-dimensional honeycomb layer parallel to the ab plane. The layer is racemic in which Δ- and Λ-coordination geometries around HoIII ions are...

  9. Changing Mechanical Strength in Cr(III)- Metallosupramolecular Polymers with Ligand Groups and Light Irradiation.

    Science.gov (United States)

    Razgoniaev, Anton O; Butaeva, Evgeniia V; Iretskii, Alexei V; Ostrowski, Alexis D

    2016-06-06

    We have demonstrated the ability to control the mechanical properties of metallosupramolecular materials via choice of ligand binding group, as well as with external light irradiation. These photoresponsive Cr(III)-based materials were prepared from a series of modified hydrogenated poly(ethylene-co-butylene) polymers linked through metal-ligand interactions between a Cr(III) metal center and pyridyl ligand termini of the polymers. The introduction of these Cr(III)-pyridine bonds gave rise to new mechanical and optical properties of the polymer materials. Depending on the type of pyridyl ligand, density functional theory calculations revealed changes in coordination to the Cr(III), which ultimately led to materials with significantly different mechanical properties. Electronic excitation of the Cr(III) materials with 450 and 655 nm CW lasers (800 mW/cm(2)) resulted in generation of excited state photophysical processes which led to temporary softening of the materials up to 143 kPa (41.5%) in storage modulus (G') magnitude. The initial mechanical strength of the materials was recovered when the light stimulus was removed, and no change in mechanical properties was observed with light irradiation where there was no absorbance by the Cr(III) moiety. These materials demonstrate that introduction of metal-ligand bonding interactions into polymers enables the design and synthesis of photoresponsive materials with tunable optical-mechanical properties not seen in traditional polymeric materials.

  10. ESCRT-III mediated cell division in Sulfolobus acidocaldarius –A reconstitution perspective

    Directory of Open Access Journals (Sweden)

    Tobias eHärtel

    2014-06-01

    Full Text Available In the framework of Synthetic Biology, it has become an intriguing question what would be the minimal representation of cell division machinery. Thus, it seems appropriate to compare how cell division is realized in different microorganisms. In particular, the cell division system of Crenarchaeota lacks certain proteins found in most bacteria and Euryarchaeota, such as FtsZ, MreB or the Min system. The Sulfolobaceae family encodes functional homologs of the eukaryotic proteins Vps4 and ESCRT-III. ESCRT-III is essential for several eukaryotic pathways, e.g. budding of intralumenal vesicles (ILVs, or cytokinesis, whereas Vps4 dissociates the ESCRT-III complex from the membrane. CdvA (Cell Division A is required for the recruitment of crenarchaeal ESCRT-III proteins to the membrane at mid-cell. The proteins polymerize and form a smaller structure during constriction. Thus, ESCRT-III mediated cell division in S. acidocaldarius shows functional analogies to the Z ring observed in prokaryotes like E. coli, which has recently begun to be reconstituted in vitro. In this short perspective, we discuss the possibility of building such an in vitro cell division system on basis of archaeal ESCRT-III.

  11. QUALIS PERIODIC EVALUATION: ANALYSIS OF QUALIS UPGRADE IN MEDICINE III.

    Science.gov (United States)

    Jukemura, José; Diniz, Márcio Augusto

    2015-01-01

    To evaluate the preliminary results related to journals up-grade that was used by Medicine III, through opportunity offered by Capes to all agency areas programs. Were used area document of Medicine I, II and III, besides other relevant topics available online at Capes site, between 2009 and 2013. The research was focused to answer two questions: 1) the stratification of Qualis is similar in the three areas of medicine? and 2) the evolution of Qualis in Medicine III was higher? Medicine III showed an increase in its Qualis classification and is publishing in journals with higher impact factors, virtually the same as the Medicine I and II. The area showed the strongest growth in recent three-year periods. Avaliar os resultados preliminares sobre a Medicina III do up-grade oportunizado pela Capes para todas as áreas. Foram utilizados os documentos de áreas e os relevantes ao tema disponíveis online no site da Capes entre 2009 e 2013. Procurou-se focar a pesquisa em dois aspectos para responder duas perguntas: 1) a estratificação do Qualis é semelhante nas três áreas da medicina? e 2) a evolução do Qualis da Medicina III foi maior? A Medicina III apresentou evolução em sua classificação Qualis e está publicando em revistas com maior fator de impacto e é praticamente igual ao da Medicina I e II. A área foi a que apresentou maior evolução nestes últimos triênios.

  12. Heparin-mimicking multilayer coating on polymeric membrane via LbL assembly of cyclodextrin-based supramolecules.

    Science.gov (United States)

    Deng, Jie; Liu, Xinyue; Ma, Lang; Cheng, Chong; Shi, Wenbin; Nie, Chuanxiong; Zhao, Changsheng

    2014-12-10

    In this study, multifunctional and heparin-mimicking star-shaped supramolecules-deposited 3D porous multilayer films with improved biocompatibility were fabricated via a layer-by-layer (LbL) self-assembly method on polymeric membrane substrates. Star-shaped heparin-mimicking polyanions (including poly(styrenesulfonate-co-sodium acrylate; Star-PSS-AANa) and poly(styrenesulfonate-co-poly(ethylene glycol)methyl ether methacrylate; Star-PSS-EGMA)) and polycations (poly(methyl chloride-quaternized 2-(dimethylamino)ethyl methacrylate; Star-PMeDMA) were first synthesized by atom transfer radical polymerization (ATRP) from β-cyclodextrin (β-CD) based cores. Then assembly of 3D porous multilayers onto polymeric membrane surfaces was carried out by alternating deposition of the polyanions and polycations via electrostatic interaction. The surface morphology and composition, water contact angle, blood activation, and thrombotic potential as well as cell viability for the coated heparin-mimicking films were systematically investigated. The results of surface ATR-FTIR spectra and XPS spectra verified successful deposition of the star-shaped supramolecules onto the biomedical membrane surfaces; scanning electron microscopy (SEM) and atomic force microscopy (AFM) observations revealed that the modified substrate had 3D porous surface morphology, which might have a great biological influence on the biointerface. Furthermore, systematic in vitro investigation of protein adsorption, platelet adhesion, human platelet factor 4 (PF4, indicates platelet activation), activate partial thromboplastin time (APTT), thrombin time (TT), coagulation activation (thrombin-antithrombin III complex (TAT, indicates blood coagulant)), and blood-related complement activation (C3a and C5a, indicates inflammation potential) confirmed that the heparin-mimicking multilayer coated membranes exhibited ultralow blood component activations and excellent hemocompatibility. Meanwhile, after surface coating

  13. Synthesis and characterization of Eu(III)-based coordination complexes of modified D-glucosamine and poly(N-isopropylacrylamide)

    Science.gov (United States)

    Cui, Guihua; Zhao, Dehai; Lv, Peng; Gao, Zhengguo; Chen, Shuiying; Qiu, Nannan; Satoh, Toshifumi; Kakuchi, Toyoji; Duan, Qian

    2017-10-01

    A series of novel fluorescent complexes was formed by chelation of the thermosensitive polymers with europium(III) ions. The polymers was synthesized via atom transfer radical polymerization (ATRP), which composed of poly(N-isopropyl acrylamide) (PNIPAM) and 2-amino-2-deoxy-D-glucopyranose(D-glucosamine, GA). The aqueous solutions of the polymers and its Eu(III) complexes exhibited a lower critical solution temperatures (LCSTs), and which were approximately equal to body temperature. The maximum emission intensity of the complexes at 613 nm was enhanced by a factor of approximately 10 relative to that of the corresponding Eu(III) chloride. Cell viability assays suggested that these thermosensitive polymers and Eu(III) complexes showed excellent biocompatibility in vitro.

  14. Poly[[hexaaquatris[μ2-2,5-dihydroxy-1,4-benzoquinonato(2−]diholmium(III] octadecahydrate

    Directory of Open Access Journals (Sweden)

    Shin-ichi Ohkoshi

    2010-10-01

    Full Text Available In the polymeric title compound, {[Ho2(C6H2O43(H2O6]·18H2O}n, the HoIII ion is nine-coordinated by six O atoms derived from three bidentate 2,5-dihydroxy-1,4-benzoquinonate (DHBQ2− ligands and three O atoms from three water molecules. The HoIII ions are connected via three ligands, resulting in the formation of a two-dimensional honeycomb layer parallel to the ab plane. The layer is racemic in which Δ- and Λ-coordination geometries around HoIII ions are alternately arranged. The asymmetric unit comprises a third of a HoIII ion, located on a threefold axis, one-half of a DHBQ2− ion, located on a centre of inversion, one coordinated water molecule and three uncoordinated water molecules.

  15. SYNTHESIS AND MAGNETIC PROPERTIES OF BINUCLEAR COMPLEX [N(n-C4H94][MnIIFeIII(ox3

    Directory of Open Access Journals (Sweden)

    Fahimah Martak

    2012-02-01

    Full Text Available Binuclear complex, [N(n-C4H94][MnIIFeIII(ox3] (ox=oxalate, has been synthesized and characterized. Binuclear complex with formula of [N(n-C4H94][MnIIFeIII(ox3] was synthesized by forming precursor K3[Fe(ox3] which was followed by adding manganese chloride and tetrabutyl ammonium chloride. Characterization of the complex was made by microanalysis, FT-IR spectroscopy, x-ray diffraction and Magnetic Susceptibility Balance. Magnetic moment of binuclear complex [N(n-C4H94][MnIIFeIII(ox3] is 7.81 BM. The compound has higher magnetic moment than the previously reported compound with different organic cation, [N(n-C5H114][MnIIFeIII(ox3]. This behavior might be associated with the decreasing range among layers on polymeric network.

  16. Origins and Evolution of Life

    Science.gov (United States)

    Gargaud, Muriel; López-García, Purificación; Martin, Hervé

    2011-01-01

    Part I. What Is Life?: 1. Problems raised by a definition of life M. Morange; 2. Some remarks about uses of cosmological anthropic 'principles' D. Lambert; 3. Minimal cell: the biologist point of view C. Brochier-Armanet; 4. Minimal cell: the computer scientist point of view H. Bersini; 5. Origins of life: computing and simulation approaches B. Billoud; Part II. Astronomical and Geophysical Context of the Emergence of Life: 6. Organic molecules in interstellar medium C. Ceccarelli and C. Cernicharo; 7. Cosmochemical evolution and the origin of life: insights from meteorites S. Pizzarello; 8. Astronomical constraints on the emergence of life M. Gounelle and T. Montmerle; 9. Formation of habitable planets J. Chambers; 10. The concept of galactic habitable zone N. Prantzos; 11. The young Sun and its influence on planetary atmospheres M. Güdel and J. Kasting; 12. Climates of the Earth G. Ramstein; Part III. Role of Water in the Emergence of Life: 13. Liquid water: a necessary condition to all forms of life K. Bartik, G. Bruylants, E. Locci and J. Reisse; 14. The role of water in the formation and evolution of planets T. Encrenaz; 15. Water on Mars J. P. Bibring; Part IV. From Non-Living Systems to Life: 16. Energetic constraints on prebiotic pathways: application to the emergence of translation R. Pascal and L. Boiteau; 17. Comparative genomics and early cell evolution A. Lazcano; 18. Origin and evolution of metabolisms J. Peretó; Part V. Mechanisms for Life Evolution: 19. Molecular phylogeny: inferring the patterns of evolution E. Douzery; 20. Horizontal gene transfer: mechanisms and evolutionary consequences D. Moreira; 21. The role of symbiosis in eukaryotic evolution A. Latorre, A. Durbán, A. Moya and J. Peretó; Part VI. Life in Extreme Conditions: 22. Life in extreme conditions: Deinococcus radiodurans, an organism able to survive prolonged desiccation and high doses of ionising radiation S. Sommer and M. Toueille; 23. Molecular effects of UV and ionizing

  17. Spectrophotometric and pH-Metric Studies of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III Metal Complexes with Rifampicin

    Directory of Open Access Journals (Sweden)

    A. N. Sonar

    2011-01-01

    Full Text Available The metal-ligand and proton-ligand stability constant of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III metals with substituted heterocyclic drug (Rifampicin were determined at various ionic strength by pH metric titration. NaClO4 was used to maintain ionic strength of solution. The results obtained were extrapolated to the zero ionic strength using an equation with one individual parameter. The thermodynamic stability constant of the complexes were also calculated. The formation of complexes has been studied by Job’s method. The results obtained were of stability constants by pH metric method is confirmed by Job’s method.

  18. Curing mechanism of flexible aqueous polymeric coatings.

    Science.gov (United States)

    Irfan, Muhammad; Ahmed, Abid Riaz; Kolter, Karl; Bodmeier, Roland; Dashevskiy, Andriy

    2017-06-01

    The objective of this study was to explain curing phenomena for pellets coated with a flexible polymeric coating based on poly(vinyl acetate) (Kollicoat® SR 30D) with regard to the effect of starter cores, thickness of drug layer, adhesion of coating to drug-layered-cores as well as coating properties. In addition, appropriate approaches to eliminate the curing effect were identified. Sugar or MCC cores were layered with the model drugs carbamazepine, theophylline, propranolol HCl, tramadol HCl and metoprolol HCl using HPMC (5 or 25% w/w, based on drug) as a binder. Drug-layered pellets were coated with Kollicoat® SR 30D in a fluidized bed coater using TEC (10% w/w) as plasticizer and talc (35-100% w/w) as anti-tacking agent. Drug release, pellet properties (morphology, water uptake-weight loss and osmolality) and adhesion of the coating to the drug layer were investigated as a function of curing at 60°C or 60°C/75% RH for 24h. The film formation of the aqueous dispersion of Kollicoat® SR 30D was complete, and therefore, a strong curing effect (decrease in drug release) at elevated temperature and humidity (60°C/75% RH) could not be explained by the well-known hydroplasticization and the further gradual coalescence of the colloidal polymer particles. According to the provided mechanistic explanation, the observed curing effect was associated with (1) high flexibility of coating, (2) adhesion between coating and drug layer, (3) water retaining properties of the drug layer, and (4) osmotically active cores. Unwanted curing effects could be minimized/eliminated by the addition of talc or/and pore-forming water soluble polymers in the coating, increasing binder amount or applying an intermediate coating, by increasing the thickness of drug layer or using non-osmotic cores. A new insight into curing phenomena mainly associated with the adhesion between drug layer and coating was provided. Appropriate approaches to avoid unwanted curing effect were identified

  19. The START III bargaining space

    Energy Technology Data Exchange (ETDEWEB)

    Karas, T.H.

    1998-08-01

    The declining state of the Russian military and precarious Russian economic condition will give the US considerable advantages at the START III bargaining table. Taking the US-RF asymmetries into account, this paper discusses a menu of START III measures the US could ask for, and measures it could offer in return, in attempting to negotiate an equitable treaty. Measures the US might seek in a START III treaty include: further reductions in deployed strategic nuclear warheads, irreversibility of reductions through warhead dismantlement; beginning to bring theater nuclear weapons under mutual control, and increased transparency into the Russian nuclear weapons complex. The US may, however, wish to apply its bargaining advantages to attempting to achieve the first steps toward two long-range goals that would enhance US security: bringing theater nuclear weapons into the US-RF arms control arena, and increasing transparency into the Russian nuclear weapons complex. In exchange for measures relating to these objectives, the US might consider offering to Russia: Further strategic weapons reductions approaching levels at which the Russians believe they could maintain a degree of parity with the US; Measures to decrease the large disparities in potential deliver-system uploading capabilities that appear likely under current START II/START III scenarios; and Financial assistance in achieving START II/START III reductions as rapidly as is technically possible.

  20. Characterization of polymeric microneedle arrays for transdermal drug delivery.

    Science.gov (United States)

    Demir, Yusuf K; Akan, Zafer; Kerimoglu, Oya

    2013-01-01

    Microfabrication of dissolvable, swellable, and biodegradable polymeric microneedle arrays (MNs) were extensively investigated based in a nano sensitive fabrication style known as micromilling that is then combined with conventional micromolding technique. The aim of this study was to describe the polymer selection, and optimize formulation compounding parameters for various polymeric MNs. Inverse replication of micromilled master MNs reproduced with polydimethylsiloxane (PDMS), where solid out of plane polymeric MNs were subsequently assembled, and physicochemically characterized. Dissolvable, swellable, and biodegradable MNs were constructed to depth of less than 1 mm with an aspect ratio of 3.6, and 1/2 mm of both inter needle tip and base spacing. Micromolding step also enabled to replicate the MNs very precisely and accurate. Polymeric microneedles (MN) precision was ranging from ± 0.18 to ± 1.82% for microneedle height, ± 0.45 to ± 1.42% for base diameter, and ± 0.22 to ± 0.95% for interbase spacing. Although dissolvable sodium alginate MN showed less physical robustness than biodegradable polylactic-co-glycolic acid MN, their thermogravimetric analysis is of promise for constructing these polymeric types of matrix devices.

  1. Thermodynamic Presynthetic Considerations for Ring-Opening Polymerization.

    Science.gov (United States)

    Olsén, Peter; Odelius, Karin; Albertsson, Ann-Christine

    2016-03-14

    The need for polymers for high-end applications, coupled with the desire to mimic nature's macromolecular machinery fuels the development of innovative synthetic strategies every year. The recently acquired macromolecular-synthetic tools increase the precision and enable the synthesis of polymers with high control and low dispersity. However, regardless of the specificity, the polymerization behavior is highly dependent on the monomeric structure. This is particularly true for the ring-opening polymerization of lactones, in which the ring size and degree of substitution highly influence the polymer formation properties. In other words, there are two important factors to contemplate when considering the particular polymerization behavior of a specific monomer: catalytic specificity and thermodynamic equilibrium behavior. This perspective focuses on the latter and undertakes a holistic approach among the different lactones with regard to the equilibrium thermodynamic polymerization behavior and its relation to polymer synthesis. This is summarized in a monomeric overview diagram that acts as a presynthetic directional cursor for synthesizing highly specific macromolecules; the means by which monomer equilibrium conversion relates to starting temperature, concentration, ring size, degree of substitution, and its implications for polymerization behavior are discussed. These discussions emphasize the importance of considering not only the catalytic system but also the monomer size and structure relations to thermodynamic equilibrium behavior. The thermodynamic equilibrium behavior relation with a monomer structure offers an additional layer of complexity to our molecular toolbox and, if it is harnessed accordingly, enables a powerful route to both monomer formation and intentional macromolecular design.

  2. Applications of polymeric micelles with tumor targeted in chemotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Ding Hui; Wang Xiaojun; Zhang Song; Liu Xinli, E-mail: Vip.lxl@163.com [Shandong Polytechnic University, Shandong Provincial Key Laboratory of Microbial Engineering (China)

    2012-11-15

    Polymeric micelles (PMs) have gained more progress as a carrier system with the quick development of biological and nanoparticle techniques. In particular, PMs with smart targeting can deliver anti-cancer drugs directly into tumor cells at a sustained rate. PMs with core-shell structure (with diameters of 10 {approx} 100 nm) have been prepared by a variety of biodegradable and biocompatible polymers via a self-assembly process. The preparation of polymeric micelles with stimuli-responsive block copolymers or modification of target molecules on polymeric micelles' surface are able to significantly improve the efficiency of drug delivery. Polymeric micelles, which have been considered as a novel promising drug carrier for cancer therapeutics, are rapidly evolving and being introduced in an attempt to overcome several limitations of traditional chemotherapeutics, including water solubility, tumor-specific accumulation, anti-tumor efficacy, and non-specific toxicity. This review describes the preparation of polymeric micelles and the targeted modification which greatly enhance the effects of chemotherapeutic agents.

  3. Linear interfacial polymerization: theory and simulations with dissipative particle dynamics.

    Science.gov (United States)

    Berezkin, Anatoly V; Kudryavtsev, Yaroslav V

    2014-11-21

    Step-growth alternating interfacial polymerization between two miscible or immiscible monomer melts is investigated theoretically and by dissipative particle dynamics simulations. In both cases the kinetics for an initially bilayer system passes from the reaction to diffusion control. The polymer composed of immiscible monomers precipitates at the interface forming a film of nearly uniform density. It is demonstrated that the reaction proceeds in a narrow zone, which expands much slower than the whole film, so that newly formed polymer is extruded from the reaction zone. This concept of "reactive extrusion" is used to analytically predict the degree of polymerization and distribution of all components (monomers, polymer, and end groups) within the film in close agreement with the simulations. Increasing the comonomer incompatibility leads to thinner and more uniform films with the higher average degree of polymerization. The final product is considerably more polydisperse than expected for the homogeneous step-growth polymerization. The results extend the previous theoretical reports on interfacial polymerization and provide new insights into the internal film structure and polymer characteristics, which are important for membrane preparation, microencapsulation, and 3D printing technologies. A systematic way of mapping the simulation data onto laboratory scales is discussed.

  4. Characterization of polymeric microneedle arrays for transdermal drug delivery.

    Directory of Open Access Journals (Sweden)

    Yusuf K Demir

    Full Text Available Microfabrication of dissolvable, swellable, and biodegradable polymeric microneedle arrays (MNs were extensively investigated based in a nano sensitive fabrication style known as micromilling that is then combined with conventional micromolding technique. The aim of this study was to describe the polymer selection, and optimize formulation compounding parameters for various polymeric MNs. Inverse replication of micromilled master MNs reproduced with polydimethylsiloxane (PDMS, where solid out of plane polymeric MNs were subsequently assembled, and physicochemically characterized. Dissolvable, swellable, and biodegradable MNs were constructed to depth of less than 1 mm with an aspect ratio of 3.6, and 1/2 mm of both inter needle tip and base spacing. Micromolding step also enabled to replicate the MNs very precisely and accurate. Polymeric microneedles (MN precision was ranging from ± 0.18 to ± 1.82% for microneedle height, ± 0.45 to ± 1.42% for base diameter, and ± 0.22 to ± 0.95% for interbase spacing. Although dissolvable sodium alginate MN showed less physical robustness than biodegradable polylactic-co-glycolic acid MN, their thermogravimetric analysis is of promise for constructing these polymeric types of matrix devices.

  5. MicroScale Thermophoresis (MST) for studying actin polymerization kinetics.

    Science.gov (United States)

    Topf, Andrea; Franz, Peter; Tsiavaliaris, Georgios

    2017-10-01

    Here, we present a MicroScale Thermophoresis (MST)-based assay for in vitro assessment of actin polymerization. By monitoring the thermophoretic behavior of ATTO488-labeled actin in a temperature gradient over time, we could follow polymerization in real time and resolve its three characteristic phases: nucleation, elongation, and steady-state equilibration. Titration experiments allowed us to evaluate the effects of actin-binding proteins (ABPs) on polymerization, including DNase I-induced inhibition and mDia2FH1FH2 (mDia2)-assisted acceleration of nucleation. The corresponding rates of actin filament elongation were quantitatively determined, yielding values in good agreement with those obtained using the pyrene-actin polymerization assay. Finally, we measured the effect of myosin on actin polymerization, circumventing the problems of fluorescence quenching and signal disturbance that occur with other techniques. MST is a simple and valuable research tool for investigating actin kinetics covering a wide range of molecular interactions, with low protein consumption.

  6. Cationic two-photon induced polymerization with high dynamic range

    Science.gov (United States)

    Boiko, Yuri B.; Costa, Joannes; Wang, Mark M.; Esener, Sadik C.

    2001-05-01

    Cationic-induced two-photon photo-polymerization is demonstrated at 710 nm, using an isopropylthioxanthone / diarylidonium salt initiating system for the cationic polymerization of an epoxide. In-situ monitoring of the polymer conversion using interferometry allows for determination of the polymerization threshold J2th, polymerization rate R and its dependence of initiator's concentration z. Best J2th achieved is 1 GW/cm 2 , with a dynamic range of > 100, i.e. the material can be fully polymerized at intensities > 100 times the threshold level without damage. The R is found to be proportional to the m=1.7 power of the intensity, or R =[C(J-J2th)]m =[C(J-J2th)]1.7 , which implies a significantly stronger localization of the photochemical response than that of free radical photoinitiators. Both R and J2th significantly improve when the concentration z of the initiator (onium salt) increases, reduction of J2th exhibiting z -m trend.

  7. Tubulin polymerization-stimulating activity of Ganoderma triterpenoids.

    Science.gov (United States)

    Kohno, Toshitaka; Hai-Bang, Tran; Zhu, Qinchang; Amen, Yhiya; Sakamoto, Seiichi; Tanaka, Hiroyuki; Morimoto, Satoshi; Shimizu, Kuniyoshi

    2017-04-01

    Tubulin polymerization is an important target for anticancer therapies. Even though the potential of Ganoderma triterpenoids against various cancer targets had been well documented, studies on their tubulin polymerization-stimulating activity are scarce. This study was conducted to evaluate the effect of Ganoderma triterpenoids on tubulin polymerization. A total of twenty-four compounds were investigated using an in vitro tubulin polymerization assay. Results showed that most of the studied triterpenoids exhibited microtuble-stabilizing activity to different degrees. Among the investigated compounds, ganoderic acid T-Q, ganoderiol F, ganoderic acid S, ganodermanontriol and ganoderic acid TR were found to have the highest activities. A structure-activity relationship (SAR) analysis was performed. Extensive investigation of the SAR suggests the favorable structural features for the tubulin polymerization-stimulating activity of lanostane triterpenes. These findings would be helpful for further studies on the potential mechanisms of the anticancer activity of Ganoderma triterpenoids and give some indications on the design of tubulin-targeting anticancer agents.

  8. Plasma polymerized high energy density dielectric films for capacitors

    Science.gov (United States)

    Yamagishi, F. G.

    1983-01-01

    High energy density polymeric dielectric films were prepared by plasma polymerization of a variety of gaseous monomers. This technique gives thin, reproducible, pinhole free, conformable, adherent, and insoluble coatings and overcomes the processing problems found in the preparation of thin films with bulk polymers. Thus, devices are prepared completely in a vacuum environment. The plasma polymerized films prepared all showed dielectric strengths of greater than 1000 kV/cm and in some cases values of greater than 4000 kV/cm were observed. The dielectric loss of all films was generally less than 1% at frequencies below 10 kHz, but this value increased at higher frequencies. All films were self healing. The dielectric strength was a function of the polymerization technique, whereas the dielectric constant varied with the structure of the starting material. Because of the thin films used (thickness in the submicron range) surface smoothness of the metal electrodes was found to be critical in obtaining high dielectric strengths. High dielectric strength graft copolymers were also prepared. Plasma polymerized ethane was found to be thermally stable up to 150 C in the presence of air and 250 C in the absence of air. No glass transitions were observed for this material.

  9. High-temperature-pressure polymerized resin-infiltrated ceramic networks.

    Science.gov (United States)

    Nguyen, J F; Ruse, D; Phan, A C; Sadoun, M J

    2014-01-01

    The aim of this study was to produce composite blocks (CB) for CAD/CAM applications by high-temperature-pressure (HT/HP) polymerization of resin-infiltrated glass-ceramic networks. The effect of network sintering and the absence/presence of initiator was investigated. Mechanical properties were determined and compared with those of Paradigm MZ100 (3M ESPE) blocks and HT/HP polymerized experimental "classic" CB, in which the filler had been incorporated by conventional mixing. The networks were made from glass-ceramic powder (VITA Zahnfabrik) formed by slip casting and were either sintered or not. They were silanized, infiltrated by urethane dimethacrylate, with or without initiator, and polymerized under HT/HP (300 MPa, 180°C) to obtain resin-infiltrated glass-ceramic network (RIGCN) CB. HT/HP polymerized CB were also made from an experimental "classic" composite. Flexural strength (σf), fracture toughness (KIC), and Vickers hardness were determined and analyzed by one- or two-way analysis of variance (ANOVA), Scheffé multiple-means comparisons (α = 0.05), and Weibull statistics (for σf). Fractured surfaces were characterized with scanning electron microscopy. The mechanical properties of RIGCN CB were significantly higher. Sintering induced significant increases in σf and hardness, while the initiator significantly decreased hardness. The results suggested that RIGCN and HT/HP polymerization could be used to obtain CB with superior mechanical properties, suitable for CAD/CAM applications.

  10. The core helium flash revisited. III. From Population I to Population III stars

    Science.gov (United States)

    Mocák, M.; Campbell, S. W.; Müller, E.; Kifonidis, K.

    2010-09-01

    Context. Degenerate ignition of helium in low-mass stars at the end of the red giant branch phase leads to dynamic convection in their helium cores. One-dimensional (1D) stellar modeling of this intrinsically multi-dimensional dynamic event is likely to be inadequate. Previous hydrodynamic simulations imply that the single convection zone in the helium core of metal-rich Pop I stars grows during the flash on a dynamic timescale. This may lead to hydrogen injection into the core and to a double convection zone structure as known from one-dimensional core helium flash simulations of low-mass Pop III stars. Aims: We perform hydrodynamic simulations of the core helium flash in two and three dimensions to better constrain the nature of these events. To this end we study the hydrodynamics of convection within the helium cores of a 1.25 M_⊙ metal-rich Pop I star (Z = 0.02), and, for the first time, a 0.85 M_⊙ metal-free Pop III star (Z = 0) near the peak of the flash. These models possess single and double convection zones, respectively. Methods: We use 1D stellar models of the core helium flash computed with state-of-the-art stellar evolution codes as initial models for our multidimensional hydrodynamic study, and simulate the evolution of these models with the Riemann solver based hydrodynamics code Herakles, which integrates the Euler equations coupled with source terms corresponding to gravity and nuclear burning. Results: The hydrodynamic simulation of the Pop I model involving a single convection zone covers 27 h of stellar evolution, while the hydrodynamic simulations of a double convection zone, in the Pop III model, span 1.8 h of stellar life. We find differences between the predictions of mixing length theory and our hydrodynamic simulations. The simulation of the single convection zone in the Pop I model shows a strong growth of the size of the convection zone due to turbulent entrainment. We therefore predict that for the Pop I model a hydrogen injection

  11. On the likelihood of detecting gravitational waves from Population III compact object binaries

    Science.gov (United States)

    Belczynski, Krzysztof; Ryu, Taeho; Perna, Rosalba; Berti, Emanuele; Tanaka, Takamitsu L.; Bulik, Tomasz

    2017-11-01

    We study the contribution of binary black hole (BH-BH) mergers from the first, metal-free stars in the Universe (Pop III) to gravitational wave detection rates. Our study combines initial conditions for the formation of Pop III stars based on N-body simulations of binary formation (including rates, binary fraction, initial mass function, orbital separation and eccentricity distributions) with an updated model of stellar evolution specific for Pop III stars. We find that the merger rate of these Pop III BH-BH systems is relatively small (≲ 0.1 Gpc-3 yr-1) at low redshifts (z gravitational wave background from Pop III mergers may be lower than recently estimated. We further estimate gravitational wave detection rates for third-generation interferometric detectors. Our calculations are relevant for low to moderately rotating Pop III stars. We can now exclude a significant (>1 per cent) contribution of these stars to low-redshift BH-BH mergers. However, it remains to be tested whether (and at what level) rapidly spinning Pop III stars in the homogeneous evolution scenario can contribute to BH-BH mergers in the local Universe.

  12. III-Nitride nanowire optoelectronics

    Science.gov (United States)

    Zhao, Songrui; Nguyen, Hieu P. T.; Kibria, Md. G.; Mi, Zetian

    2015-11-01

    Group-III nitride nanowire structures, including GaN, InN, AlN and their alloys, have been intensively studied in the past decade. Unique to this material system is that its energy bandgap can be tuned from the deep ultraviolet (~6.2 eV for AlN) to the near infrared (~0.65 eV for InN). In this article, we provide an overview on the recent progress made in III-nitride nanowire optoelectronic devices, including light emitting diodes, lasers, photodetectors, single photon sources, intraband devices, solar cells, and artificial photosynthesis. The present challenges and future prospects of III-nitride nanowire optoelectronic devices are also discussed.

  13. Peptide catalysed prebiotic polymerization of RNA

    DEFF Research Database (Denmark)

    Wieczorek, Rafal; Luisi, Pier Luigi; Monnard, Pierre-Alain

    A short peptide composed of only two amino acid residues, serine and histidine, is here reported to enable oligomerization of RNA monomers. SerHis dipeptide was previously reported to catalyse formation of peptide bonds (Gorlero et al. 2009) as well as possessing broad hydrolytic activities...... these conditions, most of the water is in the form of ice crystals and the other reactants are upconcentrated in the remaining liquid micro-inclusions, hence creating an environment with low water activity in which condensation reactions can occur. The ability of simple peptides to catalyse RNA synthesis could...... stage of chemical evolution. References Gorlero M, Wieczorek R, Adamala K, Giorgi A, Schininà ME, Stano P, Luisi PL. (2009) Ser-His catalyses the formation of peptides and PNAs. FEBS Lett. 583(1):153-6. Li Y, Zhao Y, Hatfield S, Wan R, Zhu Q, Li X, McMills M, Ma Y, Li J, Brown KL, He C, Liu F, Chen X...

  14. First Stars III Conference Summary

    Science.gov (United States)

    O'Shea, B. W.; McKee, C. F.; Heger, A.; Abel, T.

    2008-03-01

    The understanding of the formation, life, and death of Population III stars, as well as the impact that these objects had on later generations of structure formation, is one of the foremost issues in modern cosmological research and has been an active area of research during the past several years. We summarize the results presented at "First Stars III," a conference sponsored by Los Alamos National Laboratory, the Kavli Institute for Particle Astrophysics and Cosmology, and the Joint Institute for Nuclear Astrophysics. This conference, the third in a series, took place in July 2007 at the La Fonda Hotel in Santa Fe, New Mexico, U.S.A.

  15. Trichloridobis(ethyldiphenylphosphine(tetrahydrofuranmolybdenum(III

    Directory of Open Access Journals (Sweden)

    Tomasz Kruczyński

    2010-07-01

    Full Text Available In the mononuclear title compound, [MoCl3(C4H8O(C14H15P2], obtained by the reaction of trichlorotris(tetrahydrofuranmolybdenum(III and ethyldiphenylphosphine in tetrahydrofuran (THF solution, the MoIII atom is six-coordinated by one O atom of a THF molecule, two P atoms from two ethyldiphenylphosphine ligands and three Cl atoms in a distorted octahedral geometry. The C atoms of the THF molecule are disordered over two positions in a 0.55 (2:0.45 (2 ratio.

  16. Graphics Gems III IBM version

    CERN Document Server

    Kirk, David

    1994-01-01

    This sequel to Graphics Gems (Academic Press, 1990), and Graphics Gems II (Academic Press, 1991) is a practical collection of computer graphics programming tools and techniques. Graphics Gems III contains a larger percentage of gems related to modeling and rendering, particularly lighting and shading. This new edition also covers image processing, numerical and programming techniques, modeling and transformations, 2D and 3D geometry and algorithms,ray tracing and radiosity, rendering, and more clever new tools and tricks for graphics programming. Volume III also includes a

  17. Conductive cotton prepared by polyaniline in situ polymerization using laccase.

    Science.gov (United States)

    Zhang, Ya; Dong, Aixue; Wang, Qiang; Fan, Xuerong; Cavaco-Paulo, Artur; Zhang, Ying

    2014-09-01

    The high-redox-potential catalyst laccase, isolated from Aspergillus, was first used as a biocatalyst in the oxidative polymerization of water-soluble conductive polyaniline, and then conductive cotton was prepared by in situ polymerization under the same conditions. The polymerization of aniline was performed in a water dispersion of sodium dodecylbenzenesulfonate (SDBS) micellar solution with atmospheric oxygen serving as the oxidizing agent. This method is ecologically clean and permits a greater degree of control over the kinetics of the reaction. The conditions for polyaniline synthesis were optimized. Characterizations of the conducting polyaniline and cotton were carried out using Fourier transform infrared spectroscopy, UV-vis spectroscopy, cyclic voltammetry, the fabric induction electrostatic tester, and the far-field EMC shielding effectiveness test fixture.

  18. Effect of ultrasonic pretreatment on emulsion polymerization of styrene.

    Science.gov (United States)

    Nagatomo, Daichi; Horie, Takafumi; Hongo, Chizuru; Ohmura, Naoto

    2016-07-01

    This study investigated the effect of pretreatment of ultrasonic irradiation on emulsion polymerization of styrene to propose a process intensification method which gives high conversion, high reaction rate, and high energy efficiency. The solution containing styrene monomer was irradiated by a horn mounted on the ultrasonic transducer with the diameter of 5mm diameter and the frequency of 28 kHz before starting polymerization. The pretreatment of ultrasound irradiation as short as 1 min drastically improved monomer dispersion and increased reaction rate even under the agitation condition with low rotational speed of impeller. Furthermore, the ultrasonic pretreatment resulted in higher monomer concentration in polymer particles and produced larger polymer particles than conventional polymerization without ultrasonic pretreatment. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Simulation of styrene polymerization reactors: kinetic and thermodynamic modeling

    Directory of Open Access Journals (Sweden)

    A. S. Almeida

    2008-06-01

    Full Text Available A mathematical model for the free radical polymerization of styrene is developed to predict the steady-state and dynamic behavior of a continuous process. Special emphasis is given for the kinetic and thermodynamic models, where the most sensitive parameters were estimated using data from an industrial plant. The thermodynamic model is based on a cubic equation of state and a mixing rule applied to the low-pressure vapor-liquid equilibrium of polymeric solutions, suitable for modeling the auto-refrigerated polymerization reactors, which use the vaporization rate to remove the reaction heat from the exothermic reactions. The simulation results show the high predictive capability of the proposed model when compared with plant data for conversion, average molecular weights, polydispersity, melt flow index, and thermal properties for different polymer grades.

  20. Microstructured Polyacrylamide Hydrogels Prepared Via Inverse Microemulsion Polymerization.

    Science.gov (United States)

    Puig, L. J.; Sánchez-Díaz, J. C.; Villacampa, M.; Mendizábal, E.; Puig, J. E.; Aguiar, A.; Katime, I.

    2001-03-15

    The synthesis by a two-stage polymerization process of microstructured polyacrylamide hydrogels with large swelling capacity and improved mechanical properties is reported. First, crosslinked polyacrylamide particles of nanosize scale are made by inverse microemulsion polymerization. These particles are then dried and redispersed in an aqueous solution of acrylamide and polymerized in the presence of a crosslinking agent. The microstructured hydrogels, in contrast to transparent conventional polyacrylamide hydrogels, are translucid due to the presence of the dispersed particles. The swelling capacity of these hydrogels increases as the particle content increases and their Young and elastic moduli (at equilibrium swelling) diminish only slightly. Mechanical tests disclose that the microstructured hydrogels have larger Young moduli than conventional hydrogels with an identical degree of swelling. Copyright 2001 Academic Press.

  1. Polymeric mechanical amplifiers of immune cytokine-mediated apoptosis

    Science.gov (United States)

    Mitchell, Michael J.; Webster, Jamie; Chung, Amanda; Guimarães, Pedro P. G.; Khan, Omar F.; Langer, Robert

    2017-03-01

    Physical forces affect tumour growth, progression and metastasis. Here, we develop polymeric mechanical amplifiers that exploit in vitro and in vivo physical forces to increase immune cytokine-mediated tumour cell apoptosis. Mechanical amplifiers, consisting of biodegradable polymeric particles tethered to the tumour cell surface via polyethylene glycol linkers, increase the apoptotic effect of an immune cytokine on tumour cells under fluid shear exposure by as much as 50% compared with treatment under static conditions. We show that targeted polymeric particles delivered to tumour cells in vivo amplify the apoptotic effect of a subsequent treatment of immune cytokine, reduce circulating tumour cells in blood and overall tumour cell burden by over 90% and reduce solid tumour growth in combination with the antioxidant resveratrol. The work introduces a potentially new application for a broad range of micro- and nanoparticles to maximize receptor-mediated signalling and function in the presence of physical forces.

  2. Spiral actin-polymerization waves can generate amoeboidal cell crawling

    Energy Technology Data Exchange (ETDEWEB)

    Dreher, A.; Aranson, I. S.; Kruse, K.

    2014-05-09

    Amoeboidal cell crawling on solid substrates is characterized by protrusions that seemingly appear randomly along the cell periphery and drive the cell forward. For many cell types, it is known that the protrusions result from polymerization of the actin cytoskeleton. However, little is known about how the formation of protrusions is triggered and whether the appearance of subsequent protrusions is coordinated. Recently, the spontaneous formation of actin-polymerization waves was observed. These waves have been proposed to orchestrate the cytoskeletal dynamics during cell crawling. Here, we study the impact of cytoskeletal polymerization waves on cell migration using a phase-field approach. In addition to directionally moving cells, we find states reminiscent of amoeboidal cell crawling. In this framework, new protrusions are seen to emerge from a nucleation process, generating spiral actin waves in the cell interior. Nucleation of new spirals does not require noise, but occurs in a state that is apparently displaying spatio-temporal chaos.

  3. Enantioselective epoxide polymerization using a bimetallic cobalt catalyst.

    Science.gov (United States)

    Thomas, Renee M; Widger, Peter C B; Ahmed, Syud M; Jeske, Ryan C; Hirahata, Wataru; Lobkovsky, Emil B; Coates, Geoffrey W

    2010-11-24

    A highly active enantiopure bimetallic cobalt complex was explored for the enantioselective polymerization of a variety of monosubstituted epoxides. The polymerizations were optimized for high rates and stereoselectivity, with s-factors (k(fast)/k(slow)) for most epoxides exceeding 50 and some exceeding 300, well above the threshold for preparative utility of enantiopure epoxides and isotactic polyethers. Values for mm triads of the resulting polymers are typically greater than 95%, with some even surpassing 98%. In addition, the use of a racemic catalyst allowed the preparation of isotactic polyethers in quantitative yields. The thermal properties of these isotactic polyethers are presented, with many polymers exhibiting high T(m) values. This is the first report of the rapid synthesis of a broad range of highly isotactic polyethers via the enantioselective polymerization of racemic epoxides.

  4. Enantioselective Epoxide Polymerization Using a Bimetallic Cobalt Catalyst

    KAUST Repository

    Thomas, Renee M.

    2010-11-24

    A highly active enantiopure bimetallic cobalt complex was explored for the enantioselective polymerization of a variety of monosubstituted epoxides. The polymerizations were optimized for high rates and stereoselectivity, with s-factors (kfast/kslow) for most epoxides exceeding 50 and some exceeding 300, well above the threshold for preparative utility of enantiopure epoxides and isotactic polyethers. Values for mm triads of the resulting polymers are typically greater than 95%, with some even surpassing 98%. In addition, the use of a racemic catalyst allowed the preparation of isotactic polyethers in quantitative yields. The thermal properties of these isotactic polyethers are presented, with many polymers exhibiting high T m values. This is the first report of the rapid synthesis of a broad range of highly isotactic polyethers via the enantioselective polymerization of racemic epoxides. © 2010 American Chemical Society.

  5. Surface functionalization of polyamide fiber via dopamine polymerization

    Science.gov (United States)

    Kuang, Xiao-Hui; Guan, Jin-Ping; Tang, Ren-Cheng; Chen, Guo-Qiang

    2017-09-01

    The oxidative polymerization of dopamine for the functional surface modification of textile fibers has drawn great attention. In this work, the functionalization of polyamide fiber via dopamine polymerization was studied with the aim of the fabrication of hydrophilic and antistatic surface. The conditions of dopamine application were first discussed in the absence of specific oxidants in terms of the apparent color depth of polyamide fiber. Dopamine concentration, pH and time were found to exert great impact on color depth. The highest color depth was achieved at pH 8.5. In the process of modification, polydopamine was deposited onto the surface of polyamide fiber. The modified polyamide fiber displayed a yellowish brown color with excellent wash and light color fastness, and exhibited good hydrophilic, UV protection and antistatic effects. A disadvantage of the present approach was the slow rate of dopamine polymerization and functionalization.

  6. Engineered Polymeric Hydrogels for 3D Tissue Models

    Directory of Open Access Journals (Sweden)

    Sujin Park

    2016-01-01

    Full Text Available Polymeric biomaterials are widely used in a wide range of biomedical applications due to their unique properties, such as biocompatibility, multi-tunability and easy fabrication. Specifically, polymeric hydrogel materials are extensively utilized as therapeutic implants and therapeutic vehicles for tissue regeneration and drug delivery systems. Recently, hydrogels have been developed as artificial cellular microenvironments because of the structural and physiological similarity to native extracellular matrices. With recent advances in hydrogel materials, many researchers are creating three-dimensional tissue models using engineered hydrogels and various cell sources, which is a promising platform for tissue regeneration, drug discovery, alternatives to animal models and the study of basic cell biology. In this review, we discuss how polymeric hydrogels are used to create engineered tissue constructs. Specifically, we focus on emerging technologies to generate advanced tissue models that precisely recapitulate complex native tissues in vivo.

  7. Polymeric salt bridges for conducting electric current in microfluidic devices

    Science.gov (United States)

    Shepodd, Timothy J [Livermore, CA; Tichenor, Mark S [San Diego, CA; Artau, Alexander [Humacao, PR

    2009-11-17

    A "cast-in-place" monolithic microporous polymer salt bridge for conducting electrical current in microfluidic devices, and methods for manufacture thereof is disclosed. Polymeric salt bridges are formed in place in capillaries or microchannels. Formulations are prepared with monomer, suitable cross-linkers, solvent, and a thermal or radiation responsive initiator. The formulation is placed in a desired location and then suitable radiation such as UV light is used to polymerize the salt bridge within a desired structural location. Embodiments are provided wherein the polymeric salt bridges have sufficient porosity to allow ionic migration without bulk flow of solvents therethrough. The salt bridges form barriers that seal against fluid pressures in excess of 5000 pounds per square inch. The salt bridges can be formulated for carriage of suitable amperage at a desired voltage, and thus microfluidic devices using such salt bridges can be specifically constructed to meet selected analytical requirements.

  8. Recent advances on polymeric membranes for membrane reactors

    KAUST Repository

    Buonomenna, M. G.

    2012-06-24

    Membrane reactors are generally applied in high temperature reactions (>400 °C). In the field of fine chemical synthesis, however, much milder conditions are generally applicable and polymeric membranes were applied without their damage. The successful use of membranes in membrane reactors is primary the result of two developments concerning: (i) membrane materials and (ii) membrane structures. The selection of a suited material and preparation technique depends on the application the membrane is to be used in. In this chapter a review of up to date literature about polymers and configuration catalyst/ membranes used in some recent polymeric membrane reactors is given. The new emerging concept of polymeric microcapsules as catalytic microreactors has been proposed. © 2012 Bentham Science Publishers. All rights reserved.

  9. Effects of polymeric carbohydrates on growth and development

    DEFF Research Database (Denmark)

    Knudsen, Knud Erik Bach

    The main objective of the presentation is to provide insight into the role of polymeric carbohydrates in growth and development of pigs. Polymeric carbohydrates—starch and non-starch polysaccharides (NSP)—quantitatively represent the largest portion of the diets for pigs and are therefore...... at a slower and more constant rate and with SCFA being absorbed by passive diffusion. Type and levels of polymeric carbohydrates influence growth and development through different mechanisms; first, the proportion of starch to NSP plays an important role for the content of available energy (digestible......, metabolized and net energy); available energy relative to protein is crucial for performance and carcass quality; second, the proportion of starch to NSP will influence rate and type of metabolites (glucose vs. SCFA) deriving from carbohydrate assimilation, and finally, type of starch (types A, B, and C...

  10. Polymeric peptide pigments with sequence-encoded properties

    Energy Technology Data Exchange (ETDEWEB)

    Lampel, Ayala; McPhee, Scott A.; Park, Hang-Ah; Scott, Gary G.; Humagain, Sunita; Hekstra, Doeke R.; Yoo, Barney; Frederix, Pim W. J. M.; Li, Tai-De; Abzalimov, Rinat R.; Greenbaum, Steven G.; Tuttle, Tell; Hu, Chunhua; Bettinger, Christopher J.; Ulijn, Rein V.

    2017-06-08

    Melanins are a family of heterogeneous polymeric pigments that provide ultraviolet (UV) light protection, structural support, coloration, and free radical scavenging. Formed by oxidative oligomerization of catecholic small molecules, the physical properties of melanins are influenced by covalent and noncovalent disorder. We report the use of tyrosine-containing tripeptides as tunable precursors for polymeric pigments. In these structures, phenols are presented in a (supra-)molecular context dictated by the positions of the amino acids in the peptide sequence. Oxidative polymerization can be tuned in a sequence-dependent manner, resulting in peptide sequence–encoded properties such as UV absorbance, morphology, coloration, and electrochemical properties over a considerable range. Short peptides have low barriers to application and can be easily scaled, suggesting near-term applications in cosmetics and biomedicine.

  11. Polymeric Biomaterials: Diverse Functions Enabled by Advances in Macromolecular Chemistry.

    Science.gov (United States)

    Liang, Yingkai; Li, Linqing; Scott, Rebecca A; Kiick, Kristi L

    2017-01-24

    Biomaterials have been extensively used to leverage beneficial outcomes in various therapeutic applications, such as providing spatial and temporal control over the release of therapeutic agents in drug delivery as well as engineering functional tissues and promoting the healing process in tissue engineering and regenerative medicine. This perspective presents important milestones in the development of polymeric biomaterials with defined structures and properties. Contemporary studies of biomaterial design have been reviewed with focus on constructing materials with controlled structure, dynamic functionality, and biological complexity. Examples of these polymeric biomaterials enabled by advanced synthetic methodologies, dynamic chemistry/assembly strategies, and modulated cell-material interactions have been highlighted. As the field of polymeric biomaterials continues to evolve with increased sophistication, current challenges and future directions for the design and translation of these materials are also summarized.

  12. Energetics of protein nucleation on rough polymeric surfaces.

    Science.gov (United States)

    Curcio, Efrem; Curcio, Valerio; Di Profio, Gianluca; Fontananova, Enrica; Drioli, Enrico

    2010-11-04

    Metropolis Monte Carlo (MC) algorithm of the two-dimensional Ising model is used to study the heterogeneous nucleation of protein crystals on rough polymeric surfaces. The theoretical findings are compared to those obtained from classical nucleation theory (CNT), and to experimental data from protein model hen egg white lysozyme (HEWL) crystallized on poly(vinylidene fluoride) or PVDF, poly(dimethylsiloxane) or PDMS and Hyflon homemade membranes. The reduction of the activation energy for the nucleation process on polymeric membranes, predicted to occur at increasing surface roughness, results in a nucleation kinetics that is many orders of magnitude faster than in homogeneous phase. In general, MC stochastic dynamics offers the unique opportunity to investigate the effects of collective molecular aggregation at site level on the nucleation rate and, consequently, allows to identify optimal morphological and structural properties of polymeric membranes for a fine control of the crystallization kinetics.

  13. APPLICATION OF MODEL PREDICTIVE CONTROL TO BATCH POLYMERIZATION REACTOR

    Directory of Open Access Journals (Sweden)

    N.M. Ghasem

    2006-06-01

    Full Text Available The absence of a stable operational state in polymerization reactors that operates in batches is factor that determine the need of a special control system. In this study, advanced control methodology is implemented for controlling the operation of a batch polymerization reactor for polystyrene production utilizingmodel predictive control. By utilizing a model of the polymerization process, the necessary operational conditions were determined for producing the polymer within the desired characteristics. The maincontrol objective is to bring the reactor temperature to its target temperature as rapidly as possible with minimal temperature overshoot. Control performance for the proposed method is encouraging. It has been observed that temperature overshoot can be minimized by the proposed method with the use of both reactor and jacket energy balance for reactor temperature control.

  14. Assembly of heterobimetallic Ni(II)-Ln(III) (Ln(III) = Dy(III), Tb(III), Gd(III), Ho(III), Er(III), Y(III)) complexes using a ferrocene ligand: slow relaxation of the magnetization in Dy(III), Tb(III) and Ho(III) analogues.

    Science.gov (United States)

    Chakraborty, Amit; Bag, Prasenjit; Rivière, Eric; Mallah, Talal; Chandrasekhar, Vadapalli

    2014-06-21

    A family of dinuclear 3d-4f heterobimetallic complexes [LNi(H2O)(μ-OAc)Ln(NO3)2]·CH3CN; {Ln = Dy(III) (1), Tb(III) (2), Ho(III) (3), Gd(III) (4), Er(III) (5), Y(III) (6)} have been synthesized by utilizing a ferrocene-based, dual compartmental ligand H2L. 1-6 are isostructural and crystallize in the triclinic (P1) space group. In these complexes Ni(II) is present in the inner coordination sphere of the dianionic [L](2-) ligand; Ln(III) is encapsulated in the outer coordination pocket. Ni(II) shows a 2N, 4O coordination environment in a distorted octahedral geometry, while the Ln(III) ion possesses a 9O coordination environment in a distorted tricapped trigonal prismatic geometry. ESI-MS studies suggest that the structural integrity of 1-6 is retained in solution. Electrochemical studies reveal that these complexes show a reversible one-electron response typical of the ferrocene motif along with an irreversible one-electron oxidation involving the Ni(II)/Ni(III) couple. Magnetic studies revealed the presence of ferromagnetic exchange coupling between Ni(II) and Ln(III) centers as shown by the increase of χMT value upon cooling below 50 K for compounds 1, 2, 4 and 5. Further, dynamic magnetic susceptibility measurements (1-3) confirm the absence of an out-of-phase (χ'') signal at zero dc fields. However, when these measurements were carried out at 1000 Oe dc field the χ'' signal was observed, although maxima could not be detected up to 2 K.

  15. Optical investigations of various polymeric materials used in dental technology

    Science.gov (United States)

    Negrutiu, Meda Lavinia; Sinescu, Cosmin; Topala, Florin Ionel; Ionita, Ciprian; Goguta, Luciana; Marcauteanu, Corina; Rominu, Mihai; Podoleanu, Adrian Gh.

    2011-10-01

    Dental prosthetic restorations have to satisfy high stress as well as aesthetic requirements. In order to avoid deficiencies of dental prostheses, several alternative systems and procedures were imagined, directly related to the material used and also to the manufacturing technology. Increasing the biomechanical comportment of polymeric materials implies fiber reinforcing. The different fibers reinforcing products made very difficult the evaluation of their performances and biomechanical properties analysis. There are several known methods which are used to assess the quality of dental prostheses, but most are invasive. These lead to the destruction of the samples and often no conclusion could be drawn in the investigated areas of interest. Using a time domain en-face OCT system, we have recently demonstrated real time thorough evaluation of quality of various dental treatments. The aim of this study was to assess the quality of various polymeric materials used in dental technology and to validate the en face OCT imagistic evaluation of polymeric dental prostheses by using scanning electron microscopy (SEM) and microcomputer tomography (μCT). SEM investigations evidenced the nonlinear aspect of the interface between the polymeric material and the fiber reinforcement and materials defects in some samples. The results obtained by microCT revealed also some defects inside the polymeric materials and at the interfaces with the fiber reinforcement. The advantages of the OCT method consist in non-invasiveness and high resolution. In addition, en face OCT investigations permit visualization of the more complex stratified structure at the interface between the polymeric material and the fiber reinforcement.

  16. Light transmittance and polymerization kinetics of amorphous calcium phosphate composites.

    Science.gov (United States)

    Par, Matej; Marovic, Danijela; Skenderovic, Hrvoje; Gamulin, Ozren; Klaric, Eva; Tarle, Zrinka

    2017-05-01

    This study investigated light transmittance and polymerization kinetics of experimental remineralizing composite materials based on amorphous calcium phosphate (ACP), reinforced with inert fillers. Light-curable composites were composed of Bis-EMA-TEGDMA-HEMA resin and ACP, barium glass, and silica fillers. Additionally, a commercial composite Tetric EvoCeram was used as a reference. Light transmittance was recorded in real-time during curing, and transmittance curves were used to assess polymerization kinetics. To obtain additional information on polymerization kinetics, temperature rise was monitored in real-time during curing and degree of conversion was measured immediately and 24 h post-cure. Light transmittance values of 2-mm thick samples of uncured ACP composites (2.3-2.9 %) were significantly lower than those of the commercial composite (3.8 %). The ACP composites presented a considerable transmittance rise during curing, resulting in post-cure transmittance values similar to or higher than those of the commercial composite (5.5-7.9 vs. 5.4 %). The initial part of light transmittance curves of experimental composites showed a linear rise that lasted for 7-20 s. Linear fitting was performed to obtain a function whose slope was assessed as a measure of polymerization rate. Comparison of transmittance and temperature curves showed that the linear transmittance rise lasted throughout the most part of the pre-vitrification period. The linear rise of light transmittance during curing has not been reported in previous studies and may indicate a unique kinetic behavior, characterized by a long period of nearly constant polymerization rate. The observed kinetic behavior may result in slower development of polymerization shrinkage stress but also inferior mechanical properties.

  17. In situ polymerization of monomers for polyphenylquinoxaline/graphite

    Science.gov (United States)

    Serafini, T. T.; Delvigs, P.; Vannucci, R. D.

    1973-01-01

    Methods currently used to prepare fiber reinforced, high temperature resistant polyphenylquinoxaline (PPQ) composites employ extremely viscous, low solids content solutions of high molecular weight PPQ polymers. An improved approach, described in this report, consists of impregnating the fiber with a solution of the appropriate monomers instead of a solution of previously synthesized high molecular weight polymer. Polymerization of the monomers occurs in situ on the fiber during the solvent removal and curing stages. The in situ polymerization approach greatly simplifies the fabrication of PPQ graphite fiber composites. The use of low viscosity monomeric type solutions facilitates fiber wetting, permits a high solids content, and eliminates the need for prior polymer synthesis.

  18. Living atom transfer radical polymerization of 4-acetoxystyrene

    DEFF Research Database (Denmark)

    Gao, Bo; Chen, Xianyi; Ivan, Bela

    1997-01-01

    Living atom transfer radical polymerization (ATRP) of 4-acetoxystyrene (1), a protected 4-vinylphenol, leading to poly(4-acetoxystyrene) with well-defined molecular weight and narrow molecular weight distribution was carried out in bulk with a,a'-dibromoxylene(2)/CuBr/2,2-bipyridine(bpy) as initi......Living atom transfer radical polymerization (ATRP) of 4-acetoxystyrene (1), a protected 4-vinylphenol, leading to poly(4-acetoxystyrene) with well-defined molecular weight and narrow molecular weight distribution was carried out in bulk with a,a'-dibromoxylene(2)/CuBr/2,2-bipyridine...

  19. Polymeric Gas-Separation Membranes for Petroleum Refining

    Directory of Open Access Journals (Sweden)

    Yousef Alqaheem

    2017-01-01

    Full Text Available Polymeric gas-separation membranes were commercialized 30 years ago. The interest on these systems is increasing because of the simplicity of concept and low-energy consumption. In the refinery, gas separation is needed in many processes such as natural gas treatment, carbon dioxide capture, hydrogen purification, and hydrocarbons separations. In these processes, the membranes have proven to be a potential candidate to replace the current conventional methods of amine scrubbing, pressure swing adsorption, and cryogenic distillation. In this paper, applications of polymeric membranes in the refinery are discussed by reviewing current materials and commercialized units. Economical evaluation of these membranes in comparison to traditional processes is also indicated.

  20. Stress wave propagation and mitigation in two polymeric foams

    Science.gov (United States)

    Pradel, Pierre; Malaise, Frederic; Cadilhon, Baptiste; Quessada, Jean-Hugues; de Resseguier, Thibaut; Delhomme, Catherine; Le Blanc, Gael

    2017-06-01

    Polymeric foams are widely used in industry for thermal insulation or shock mitigation. This paper investigates the ability of a syntactic epoxy foam and an expanded polyurethane foam to mitigate intense (several GPa) and short duration (tests and dynamic soft recovery experiments have also been performed to determine the compaction mechanisms. In the polyurethane foam, the pores are closed by elastic buckling of the matrix and damage of the structure. In the epoxy foam, the compaction is due to the crushing of glass microspheres. Two porous material models successfully represent the macroscopic response of these polymeric foams.

  1. Polymeric compositions incorporating polyethylene glycol as a phase change material

    Science.gov (United States)

    Salyer, Ival O.; Griffen, Charles W.

    1989-01-01

    A polymeric composition comprising a polymeric material and polyethylene glycol or end-capped polyethylene glycol as a phase change material, said polyethylene glycol and said end-capped polyethylene glycol having a molecular weight greater than about 400 and a heat of fusion greater than about 30 cal/g; the composition is useful in making molded and/or coated materials such as flooring, tiles, wall panels and the like; paints containing polyethylene glycols or end-capped polyethylene glycols are also disclosed.

  2. Antimicrobial polymeric materials with quaternary ammonium and phosphonium salts.

    Science.gov (United States)

    Xue, Yan; Xiao, Huining; Zhang, Yi

    2015-02-06

    Polymeric materials containing quaternary ammonium and/or phosphonium salts have been extensively studied and applied to a variety of antimicrobial-relevant areas. With various architectures, polymeric quaternary ammonium/phosphonium salts were prepared using different approaches, exhibiting different antimicrobial activities and potential applications. This review focuses on the state of the art of antimicrobial polymers with quaternary ammonium/phosphonium salts. In particular, it discusses the structure and synthesis method, mechanisms of antimicrobial action, and the comparison of antimicrobial performance between these two kinds of polymers.

  3. Antimicrobial Polymeric Materials with Quaternary Ammonium and Phosphonium Salts

    Directory of Open Access Journals (Sweden)

    Yan Xue

    2015-02-01

    Full Text Available Polymeric materials containing quaternary ammonium and/or phosphonium salts have been extensively studied and applied to a variety of antimicrobial-relevant areas. With various architectures, polymeric quaternary ammonium/phosphonium salts were prepared using different approaches, exhibiting different antimicrobial activities and potential applications. This review focuses on the state of the art of antimicrobial polymers with quaternary ammonium/phosphonium salts. In particular, it discusses the structure and synthesis method, mechanisms of antimicrobial action, and the comparison of antimicrobial performance between these two kinds of polymers.

  4. Characterization of selected LDEF-exposed polymeric films

    Science.gov (United States)

    Young, Philip R.; Slemp, Wayne S.; Gautreaux, Carol R.

    1992-01-01

    The characterization of selected experimental and commercially available thin polymeric films which received 10 months of exposure to the LEO environment on the Long Duration Exposure Facility is reported. The visual appearance of most specimens changed due to exposure. However, except for a silicon-containing copolymer film, chemical characterization including infrared, thermal, and X-ray photoelectron analyses showed that the molecular structure of the surviving material had not changed significantly in response to exposure. Surface texturing due to atomic oxygen erosion was documented using various microscopic analyses. The possibility of continued post-exposure degradation of some polymeric materials is proposed.

  5. Thermomechanical properties of polymeric materials and related stresses

    Science.gov (United States)

    Lee, Sheng Yen

    1990-01-01

    The thermomechanical analysis (TMA) and dynamic mechanical analysis characterizations of a polymeric material yield useful data relating to the thermomechanical stresses of eight widely used polymeric materials. The materials encompass Lexan, Plexiglass, Epon, Conap, Uralane, Solithane, and Humiseal. A combined profile of the coefficient of thermal expansion (CTE) and the modulus change over a wide temperature range obtained by these analytical methods indicates the drastic effects of glass transition on both the CTE and the modulus of a polymer. TMA can also detect secondary transitions, and provides a convenient means for the study of a polymer's toughness.

  6. On the sedimentation velocity of spheres in a polymeric liquid

    DEFF Research Database (Denmark)

    Rasmussen, Henrik Koblitz; Hassager, Ole

    1996-01-01

    A Lagrangian finite element method is used to simulate the transient sedimentation of spheres in polymeric liquids. The liquid is described by an integral constitutive equation of the Rivlin-Sawyers type. The simulations show a marked increase in the drag, which is apparently related to the elong......A Lagrangian finite element method is used to simulate the transient sedimentation of spheres in polymeric liquids. The liquid is described by an integral constitutive equation of the Rivlin-Sawyers type. The simulations show a marked increase in the drag, which is apparently related...

  7. Three-dimensional simulations of viscoelastic instability in polymeric filaments

    DEFF Research Database (Denmark)

    Rasmussen, Henrik Koblitz; Hassager, Ole

    1999-01-01

    The three-dimensional Langrangian integral method is used to simulate the elastic end-plate instability that occurs in the rapid extension of some polymeric filaments between parallel plates. It is demonstrated that the upper convected Maxwell model describes the essential features of the instabi......The three-dimensional Langrangian integral method is used to simulate the elastic end-plate instability that occurs in the rapid extension of some polymeric filaments between parallel plates. It is demonstrated that the upper convected Maxwell model describes the essential features...

  8. A Kinetic Study of the Emulsion Polymerization of Vinyl Acetate

    DEFF Research Database (Denmark)

    Friis, N.; Nyhagen, L.

    1973-01-01

    The emulsion polymerization of vinyl acetate was studied at 50°C. It was found that the rate of polymerization was proportional to the 0.5 power of the initiator concentration and the 0.25 power of the number of particles. The number of particles was proportional to the power 0.5 ± 0.05 of the em...... to that of vinyl chloride. The linearity of the conversion-versus-time curve is explained as being due partly to a decrease in the desorption rate of radicals from the polymer particles and partly to a decrease in the termination rate constant....

  9. Durability of Polymeric Encapsulation Materials for Concentrating Photovoltaic Systems (Poster)

    Energy Technology Data Exchange (ETDEWEB)

    Miller, D. C.; Kempe, M. D.; Araki, K.; Kennedy, C. E.; Kurtz, S. R.

    2011-02-01

    Polymeric encapsulation materials are typically used in concentrating photovoltaic (CPV) modules to protect the cell from the field environment. Because it is physically located adjacent to the cell, the encapsulation is exposed to a high optical flux, often including light in the ultraviolet (UV) and infrared (IR) wavelengths. The durability of encapsulants used in CPV modules is critical to the technology, but is presently not well understood. This work seeks to identify the appropriate material types, field-induced failure mechanisms, and factors of influence (if possible) of polymeric encapsulation. These results will ultimately be weighed against those of future qualification and accelerated life test procedures.

  10. Timely management of developing class III malocclusion

    OpenAIRE

    M R Yelampalli; M R Rachala

    2012-01-01

    Timing of orthodontic treatment, especially for children with developing class III malocclusions, has always been somewhat controversial, and definitive treatment tends to be delayed for severe class III cases. Developing class III patients with moderate to severe anterior crossbite and deep bite may need early intervention in some selected cases. Class III malocclusion may develop in children as a result of an inherent growth abnormality, i.e. true class III malocclusion, or as a result of p...

  11. Flora Malesiana, Series III: Bryophyta

    NARCIS (Netherlands)

    Wijk, van der R.

    1951-01-01

    Scope, organization, and purpose of Series III, Flora Malesiana (Musci and Hepaticae) are explained. Collaboration is asked on the following points: (a) To collect Mosses and Hepaticae in Malaysia and to add extensive and detailed data to the specimens (directions available on application to the

  12. Synthesis of Well-Defined Polybenzamide-block-Polystyrene by Combination of Chain-Growth Condensation Polymerization and RAFT Polymerization.

    Science.gov (United States)

    Masukawa, Tomohiro; Yokoyama, Akihiro; Yokozawa, Tsutomu

    2009-08-18

    Well-defined diblock copolymers composed of poly(N-octylbenzamide) and polystyrene were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization of styrene with a polyamide chain transfer agent (CTA) prepared via chain-growth condensation polymerization. Synthesis of a dithioester-type macro-CTA possessing the polyamide segment as an activating group was unsatisfactory due to side reactions and incomplete introduction of the benzyl dithiocarbonyl unit. On the other hand, a dithiobenzoate-CTA containing poly(N-octylbenzamide) as a radical leaving group was easily synthesized, and the RAFT polymerization of styrene with this CTA afforded poly(N-octylbenzamide)-block-polystyrene with controlled molecular weight and narrow polydispersity. Copyright © 2009 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Iron-Mediated Homogeneous ICAR ATRP of Methyl Methacrylate under ppm Level Organometallic Catalyst Iron(III Acetylacetonate

    Directory of Open Access Journals (Sweden)

    Jian Wu

    2016-01-01

    Full Text Available Atom Transfer Radical Polymerization (ATRP is an important polymerization process in polymer synthesis. However, a typical ATRP system has some drawbacks. For example, it needs a large amount of transition metal catalyst, and it is difficult or expensive to remove the metal catalyst residue in products. In order to reduce the amount of catalyst and considering good biocompatibility and low toxicity of the iron catalyst, in this work, we developed a homogeneous polymerization system of initiators for continuous activator regeneration ATRP (ICAR ATRP with just a ppm level of iron catalyst. Herein, we used oil-soluble iron (III acetylacetonate (Fe(acac3 as the organometallic catalyst, 1,1′-azobis (cyclohexanecarbonitrile (ACHN with longer half-life period as the thermal initiator, ethyl 2-bromophenylacetate (EBPA as the initiator, triphenylphosphine (PPh3 as the ligand, toluene as the solvent and methyl methacrylate (MMA as the model monomer. The factors related with the polymerization system, such as concentration of Fe(acac3 and ACHN and polymerization kinetics, were investigated in detail at 90 °C. It was found that a polymer with an acceptable molecular weight distribution (Mw/Mn = 1.43 at 45.9% of monomer conversion could be obtained even with 1 ppm of Fe(acac3, making it needless to remove the residual metal in the resultant polymers, which makes such an ICAR ATRP process much more industrially attractive. The “living” features of this polymerization system were further confirmed by chain-extension experiment.

  14. Dipeptide catalysed prebiotic polymerization of RNA

    DEFF Research Database (Denmark)

    Wieczorek, Rafal; Luisi, Pier Luigi; Monnard, Pierre-Alain

    2011-01-01

    A very short peptide composed of only two amino acid residues; Ser and His, was reported to exhibit broad hydrolytic activities. The dipeptide SerHis can catalyse the hydrolysis of esters, proteins and nucleic acids1. The ability of such a short peptide to be an efficient catalyst could be an imp......A very short peptide composed of only two amino acid residues; Ser and His, was reported to exhibit broad hydrolytic activities. The dipeptide SerHis can catalyse the hydrolysis of esters, proteins and nucleic acids1. The ability of such a short peptide to be an efficient catalyst could...... be an important factor from an origin-of-life point of view. Short peptides are plausible products of prebiotic chemistry2. Consequently, they could have influenced chemical evolution on an early stage. An enzyme catalysing hydrolytic reactions can in principle be used as catalyst for condensation: the reverse......-concentrated in the remaining liquid microinclusions, thus creating an environment with low water activity in which condensation reactions can occur. Successful oligomerization of RNA monomers catalysed by the SerHis dipeptide was observed in a broad range of pH, and with all four natural nucleobases. The isomeric dipeptide...

  15. White Light-Emitting Diodes Based on Individual Polymerized Carbon Nanodots

    National Research Council Canada - National Science Library

    Zheng Xie; Zhengmao Yin; Yongzhong Wu; Chunyan Liu; Xiaopeng Hao; Qingqing Du; Xiangang Xu

    2017-01-01

    .... Here, polymerizable silane pre-functionalized carbon dot (SiCD) fluids were dripped and co-polymerized or completely bulk polymerized to build color conversion and encapsulation coatings of commercially available GaN blue LEDs...

  16. In-situ Polymerization of Styrene to Produce Polystyrene / Montmorillonite Nanocomposites

    National Research Council Canada - National Science Library

    Lahouari Mrah; Rachid Meghabar; Mohammed Belbachir

    2015-01-01

    .... CTAB-intercalated Mmt particles were easily dispersed and swollen in styrene monomer, PS/Mmt-CTAB nanocomposites were synthesized via in-situ polymerization, in-situ polymerization, this method...

  17. Polymeric particulate technologies for oral drug delivery and targeting: A pathophysiological perspective

    DEFF Research Database (Denmark)

    Hunter, A. Christy; Elsom, Jacqueline; Wibroe, Peter Popp

    2012-01-01

    to optimize drug targeting and bioavailability. Frequently the carrier systems used are either constructed from or contain polymeric materials. Examples of these nanocarriers include polymeric nanoparticles, solid lipid nanocarriers, self-nanoemulsifying drug delivery systems and nanocrystals...

  18. Enhancing collagen stability through nanostructures containing chromium(III) oxide.

    Science.gov (United States)

    Sangeetha, Selvam; Ramamoorthy, Usha; Sreeram, Kalarical Janardhanan; Nair, Balachandran Unni

    2012-12-01

    Stabilization of collagen for various applications employs chemicals such as aldehydes, metal ions, polyphenols, etc. Stability against enzymatic, thermal and mechanical degradation is required for a range of biomedical applications. The premise of this research is to explore the use of nanoparticles with suitable functionalization/encapsulation to crosslink with collagen, such that the three dimensional architecture had the desired stability. Collagen solution prepared as per standard protocols is treated with chromium(III) oxide nanoparticules encapsulated within a polymeric matrix (polystyrene-block-polyacrylic acid copolymer). Selectivity towards encapsulation was ensured by the reaction in dimethyl sulfoxide, where the PS groups popped out and encapsulated the Cr(2)O(3). Subsequently when immersed in aqueous solution, PAA units popped up to react with functional groups of collagen. The interaction with collagen was monitored through techniques such as CD, FTIR, viscosity measurements, stress analysis. CD studies and FTIR showed no degradation of collagen. Thermal stability was enhanced upon interaction of nanostructures with collagen. Self-assembly of collagen was delayed but not inhibited, indicating a compete binding of the metal oxide encapsulated polymer to collagen. Metal oxide nanoparticles encapsulated within a polymeric matrix could provide thermal and mechanical stability to collagen. The formed fibrils of collagen could serve as ideal material for various smart applications such as slow/sustained drug release. The study is also relevant to the leather industry in that the nanostructures can diffuse through the highly networked collagen fibre bundles in skin matrix easily, thus overcoming the rate limiting step of diffusion. Copyright © 2012 Elsevier B.V. All rights reserved.

  19. Heterofunctional Glycopolypeptides by Combination of Thiol-Ene Chemistry and NCA Polymerization.

    Science.gov (United States)

    Krannig, Kai-Steffen; Schlaad, Helmut

    2016-01-01

    Glycopolypeptides are prepared either by the polymerization of glycosylated amino acid N-carboxyanhydrides (NCAs) or by the post-polymerization functionalization of polypeptides with suitable functional groups. Here we present a method for the in-situ functionalization and (co-) polymerization of allylglycine N-carboxyanhydride in a facile one-pot procedure, combining radical thiol-ene photochemistry and nucleophilic ring-opening polymerization techniques, to yield well-defined heterofunctional glycopolypeptides.

  20. Design and testing of tubular polymeric capsules for self-healing of concrete

    OpenAIRE

    Araújo, M.; van Tittelboom, K; Feiteira, J.; Gruyaert, Elke; Chatrabhuti, S.; Raquez, J. M.; Savija, B.; Alderete, N.; Schlangen, H.E.J.G.; de Belie, N

    2017-01-01

    Polymeric healing agents have proven their efficiency to heal cracks in concrete in an autonomous way. However, the bottleneck for valorisation of self-healing concrete with polymeric healing agents is their encapsulation. In the present work, the suitability of polymeric materials such as poly(methyl methacrylate) (PMMA), polystyrene (PS) and poly(lactic acid) (PLA) as carriers for healing agents in self-healing concrete has been evaluated. The durability of the polymeric capsules in differe...

  1. Tribology of polymeric nanocomposites friction and wear of bulk materials and coatings

    CERN Document Server

    Friedrich, Klaus

    2013-01-01

    Tribology of Polymeric Nanocomposites provides a comprehensive description of polymeric nanocomposites, both as bulk materials and as thin surface coatings, and provides rare, focused coverage of their tribological behavior and potential use in tribological applications. Providing engineers and designers with the preparation techniques, friction and wear mechanisms, property information and evaluation methodology needed to select the right polymeric nanocomposites for the job, this unique book also includes valuable real-world examples of polymeric nanocomposites in a

  2. Synthesis of Polymer Grafted Magnetite Nanoparticle with the Highest Grafting Density via Controlled Radical Polymerization

    OpenAIRE

    Babu Kothandapani; Dhamodharan Raghavachari

    2009-01-01

    Abstract The surface-initiated ATRP of benzyl methacrylate, methyl methacrylate, and styrene from magnetite nanoparticle is investigated, without the use of sacrificial (free) initiator in solution. It is observed that the grafting density obtained is related to the polymerization kinetics, being higher for faster polymerizing monomer. The grafting density was found to be nearly 2 chains/nm2for the rapidly polymerizing benzyl methacrylate. In contrast, for the less rapidly polymerizing styren...

  3. A Numerical Study of Reaction Kinetics Model of Polymerization In ...

    African Journals Online (AJOL)

    The model which is a system of partial differential equations is analyzed numerically using the finite difference scheme to obtain results for1, 2, 3, 4, 10, 100, 1000 (where p is the order of reaction). Keywords: Frontal polymerization, Material diffusion. Journal of the Nigerian Association of Mathematical Physics, Volume 19 ...

  4. Novel Polymeric Prodrugs of Valproic Acid as Anti- Epilepsy Drugs ...

    African Journals Online (AJOL)

    All the compounds were characterized by Fourier transform infrared (FT-IR), nuclear magnetic resonance (1H and 13C-NMR), elemental analyses, and gel permeation chromatography (GPC). The release of VPA from polymeric prodrugs was studied using cellophane membrane dialysis bags containing aqueous buffer ...

  5. Visualization and characterization of interfacial polymerization layer formation

    NARCIS (Netherlands)

    Zhang, Yali; Benes, Nieck Edwin; Lammertink, Rob G.H.

    2015-01-01

    We present a microfluidic platform to visualize the formation of free-standing films by interfacial polymerization. A microfluidic device is fabricated, with an array of micropillars to stabilize an aqueous–organic interface that allows a direct observation of the films formation process via optical

  6. Assessment of polymerization contraction stress of three composite resins

    NARCIS (Netherlands)

    Cadenaro, M.; Biasotto, M.; Scuor, N.; Breschi, L.; Davidson, C.L.; Di Lenarda, R.

    2008-01-01

    Objectives: The purpose of this study was to measure the development of contraction stress of three composite resin restorative materials during photo-polymerization: a micro-hybrid composite (Filtek Z250, 3M ESPE, St. Paul, MN, USA); a nano-filled composite (Filtek Supreme, 3M ESPE, St. Paul, MN,

  7. Epithelial-microbial crosstalk in polymeric Ig receptor deficient mice

    NARCIS (Netherlands)

    Reikvam, D.H.; Derrien, M.M.N.; Islam, R.; Erofeev, A.; Grcic, V.; Sandvik, A.; Gaustad, P.; Meza-Zepeda, L.A.; Jahnsen, F.L.; Smidt, H.; Johansen, F.E.

    2012-01-01

    Innate and adaptive mucosal defense mechanisms ensure a homeostatic relationship with the large and complex mutualistic gut microbiota. Dimeric IgA and pentameric IgM are transported across the intestinal epithelium via the epithelial polymeric Ig receptor (pIgR) and provide a significant portion of

  8. Shock Wave Energy Dissipation using Polymerized Ionic Liquids

    Science.gov (United States)

    Lee, Jaejun; Ren, Yi; Evans, Christopher; Moore, Jeffrey; Sottos, Nancy

    2017-06-01

    Polymerized ionic liquids composed of alkyl-imidazolium cations and bis(trifluoromethane)sulfonamide anions exhibit intriguing shock wave energy absorption performance. In prior work, we observed a shock-induced disorder-to-order change in network forming ionic liquids. We hypothesize that this shock-induced ordering is strongly associated with the microstructure of the ionic liquids. Polymerized ionic liquids, which have similar microstructures but slower relaxation times compared to the ionic liquids, are prepared to demonstrate the ordering transition mechanism and to exploit relaxation processes for the energy dissipation. By employing size-tunable alkyl backbone spacers between cations, we explore the effect of the relative microstructural heterogeneity on the activation of shock-induced ordering. Relaxation time, which is adjustable by the alkyl spacer length, also plays an important role in the energy dissipation process. Absorption properties of a series of thin film (ca. 50 μm) polymerized ionic liquids are evaluated using a laser-induced shock wave testing protocol. Superior shock wave mitigating performance of polymerized ionic liquids was achieved compared to polyurea films.

  9. X-ray-absorption studies of organodisulfide redox polymeric electrodes

    Energy Technology Data Exchange (ETDEWEB)

    Yang, X.Q.; Xue, K.H.; Lee, H.S.; McBreen, J. (Brookhaven National Laboratory, Upton, New York 11973 (United States)); Skotheim, T.A. (Moltech Corporation, Stony Brook, New York 11794-2275 (United States)); Lu, F. (CFFLS, University of Kentucky, Lexington, Kentucky 40506 (United States))

    1992-03-01

    We have measured the near-edge x-ray-absorption fine-structure (NEXAFS) spectra of the {ital K} edge of sulfur in organodisulfide redox polymeric electrodes in both charged and discharged states. The formation and scission of S-S bonding during the charge-discharge cycle were observed through NEXAFS spectroscopy.

  10. Shear-induced transitions in a ternary polymeric system

    NARCIS (Netherlands)

    Zvelindovsky, AV; Sevink, GJA; Fraaije, JGEM

    The first three-dimensional simulation of shear-induced phase transitions in a polymeric system has been performed. The method is based on dynamic density-functional theory. The pathways between a bicontinuous phase with developing gyroid mesostructure and a lamellar/cylinder phase coexistence are

  11. Synthesis of monomeric and polymeric alkali and alkaline earth ...

    Indian Academy of Sciences (India)

    5, September 2014, pp. 1463–1475. c Indian Academy of Sciences. Synthesis of monomeric and polymeric alkali and alkaline earth metal complexes using a phosphinoselenoic amide ligand in metal coordination sphere. JAYEETA BHATTACHARJEE, RAVI K KOTTALANKA, HARINATH ADIMULAM and TARUN K PANDA.

  12. Polymer-clay nanocomposites obtained by solution polymerization ...

    Indian Academy of Sciences (India)

    Abstract. Polymer-clay nanocomposites were synthesized by solution polymerization method using advanced functionalized clay and vinyl benzyl trimethyl ammonium chloride as monomer. First stage con- sisted in the silylation of a commercial organo-modified clay-Cl 20A using alkoxysilanes with different chain lengths.

  13. Emulsion polymerization of vinyl acetate initiated by intermittent. gamma. radiation

    Energy Technology Data Exchange (ETDEWEB)

    Sundardi, F.

    1979-08-15

    The reaction kinetics of emulsion polymerization of vinyl acetate (VAc) monomer have been studied by using intermittent ..gamma.. radiation. The purpose of this technique is to take advantage of the polymerization reaction which still continues after the radiation production has been stopped, as expected by the Smith-Ewart rate theory. Tween 20 (polyoxyethylene sorbitan monolaurate), was used as the emulsifier. The polymer conversion was determined by using the dilatometric method. The polymerization rate R/sub p/ decreased with increase in emulsifier content. The Smith-Ewart rate theory cannot explain the experimental evidence satisfactorily. The average polymerization rate anti R/sub p/ between 20% and 80% conversion is a function of irradiation dose rate and can be written anti R/sub p/ = a/sub 1/I/sup a2/ where a/sub 1/ and a/sub 2/ is a constant in which the value depends on the emulsifier content in the emulsion and I is the irradiation dose rate.

  14. Prevalence of pesticides in postconsumer agrochemical polymeric packaging.

    Science.gov (United States)

    Eras, J; Costa, J; Vilaró, F; Pelacho, A M; Canela-Garayoa, R; Martin-Closas, L

    2017-02-15

    Pesticide remains contained in agrochemical packaging waste are a source of uncontrolled risk for human health; they are also a quality feedstock for the plastic recycling industry. Many governments have recently started to establish laws and regulations to develop systems for recovering and recycling the polymeric packages used for pesticides. There is also a demand in having a procedure to control the suitability of the pesticide packages to be reused. We have developed a two-step operation process to assess the pesticide residues in agricultural containers made of a variety of polymeric matrices. The procedure is based on an extraction with a solvent mixture followed by UPLC-MS/MS determination. Solvents for neutral pesticides were selected considering the Hildebrand solubility (δ) of solvents and polymers together with those estimated for the pesticides. The proposed technique is effective in recovering imbibed pesticides in polymeric matrices. Also, a simplified extraction procedure has been tested to become a routine method for these wastes. We have found that in many cases a significant amount of pesticides remain into the polymeric matrix, even after a standardized cleaning; the impact of releasing these hazardous compounds into the environment is to be of further consideration. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Lyophilized Oral Sustained Release Polymeric Nanoparticles of Nateglinide

    OpenAIRE

    Kaleemuddin, Mohammad; Srinivas, Prathima

    2012-01-01

    The objective of this study is to formulate lyophilized oral sustained release polymeric nanoparticles of nateglinide in order to decrease dosing frequency, minimize side effects, and increase bioavailability. Nateglinide-loaded poly Ɛ-caprolactone nanoparticles were prepared by emulsion solvent evaporation with ultrasonication technique and subjected to various studies for characterization including scanning electron microscopy (SEM), Fourier transform infrared spectroscopy, photon correlati...

  16. HIGH-IMPACT STRENGTH AS-POLYMERIZED PLLA

    NARCIS (Netherlands)

    GRIJPMA, DW; NIJENHUIS, AJ; VANWIJK, PGT; PENNINGS, AJ

    1992-01-01

    As-polymerized poly(L-lactide), (PLLA), has a much higher impact strength than after compression moulding. Several routes have been explored to further increase the impact strength of nascent PLLA. First results on the preparation of composites with carbon fibres, the copolymerization with

  17. Carboxylate-bridged Cu(II) coordination polymeric complex ...

    Indian Academy of Sciences (India)

    SABITHAKALA THATITURI

    Keywords. Copper(II)polymeric complex; ferromagnetism; electrochemical studies; crystal structure. ... The electron transfer mechanism of copper(II) complex ... EPR spec- trum was obtained using BRUKER Xenon EMX-ER073 spectrometer. X-ray powder diffractograms were recorded on a SMART Bruker D8 advance X-ray ...

  18. Surface Hardness of Resin Cement Polymerized under Different Ceramic Materials

    Directory of Open Access Journals (Sweden)

    Pimmada Kesrak

    2012-01-01

    Full Text Available Objectives. To evaluate the surface hardness of two light-cured resin cements polymerized under different ceramic discs. Methods. 40 experimental groups of 2 light-cured resin cement specimens (Variolink Veneer and NX3 were prepared and polymerized under 5 different ceramic discs (IPS e.max Press HT, LT, MO, HO, and Cercon of 4 thicknesses (0.5, 1.0, 1.5, and 2.0 mm, Those directly activated of both resin cements were used as control. After light activation and 37∘C storage in an incubator, Knoop hardness measurements were obtained at the bottom. The data were analyzed with three-way ANOVA, t-test, and one-way ANOVA. Results. The KHN of NX3 was of significantly higher than that of Variolink Veneer (<0.05. The KHN of resin cement polymerized under different ceramic types and thicknesses was significant difference (<0.05. Conclusion. Resin cements polymerized under different ceramic materials and thicknesses showed statistically significant differences in KHN.

  19. Application of fuzzy logic in the control of polymerization reactors

    NARCIS (Netherlands)

    Roffel, B.; Chin, P.A.

    1993-01-01

    Polymer reactors are ideal candidates for the application of fuzzy control. Many polymerization reactions are difficult to model, process measurements are often only available from laboratory analysis at infrequent time intervals and trace impurities can have a marked effect on the reaction. All

  20. Direct Writing of Photonic Structures by Two-Photon Polymerization

    Directory of Open Access Journals (Sweden)

    Li Yan

    2013-11-01

    Full Text Available Single-mode dielectric-loaded surface plasmon-polariton nanowaveguides with strong mode confinement at excitation wavelength of 830 nm and high-Q polymer whispering gallery mode microcavities with surface roughness less than 12 nm have been directly written by two-photon polymerization, which pave the way to fabricate 3D plasmonic photonic structures by direct laser writing.