WorldWideScience

Sample records for evaluation process avaliacao

  1. Technical evaluation of thermodynamics processes; Avaliacao tecnica dos processos termodinamicos

    Energy Technology Data Exchange (ETDEWEB)

    Petracco, Fulvio Celso

    1986-05-01

    An evaluation of thermodynamic processes, energy losses the origin of energy losses on thermodynamic process, where are the points or sources of those losses and variation of process when compared in relation of thermodynamic performance are discussed. The concept of energy losses and its origin, energy and work capacity, performance rates and examples of thermodynamic efficiency are also debated 3 figs.

  2. Heavy and viscous oil evaluation in a deep water environment: an integrated evaluation process; Avaliacao de oleo pesado e viscoso em aguas profundas: um processo integrado de avaliacao

    Energy Technology Data Exchange (ETDEWEB)

    Barreto, Wesley S.; Armacanqui, Gina [Schlumberger, Rio de Janeiro, RJ (United States)

    2004-07-01

    There are many challenges related to heavy and viscous oil reserves evaluation. When this includes a deep-water offshore environment the challenges, including safety issues, increase in complexity. In this paper we share some experiences obtained during the preparation and execution of heavy oil evaluation activities. The process uses the petrophysical and fluid characterization preliminary results obtained during the logging phase as well as prior information from correlation field/wells in order to design the appropriate ESP configuration and location in the DST string as well as the sampler location which should allow monophasic sampling. During the operation a real time interpretation is performed validating the data obtained and sensitizing parameters such as pump frequency, bubble point pressure, GOR and viscosities, allowing the diagnostic of the operation and consequent appropriated flow conditions in order to provide a optimum picture supporting decisions regarding sampling time and other specific evaluation objectives. The examples presented illustrate the methodology proposed of integrated evaluation applied to heavy oil and its benefits. (author)

  3. Quality evaluation of blood irradiation process;Avaliacao da qualidade do processo de irradiacao de hemocomponentes

    Energy Technology Data Exchange (ETDEWEB)

    Goto, R.E.; Medeiros, R.B. [Universidade Federal de Sao Paulo (DDI/UNIFESP), SP (Brazil). Dept. de Diagnostico por Imagem. Coordenadoria de Fisica e Higiene das Radiacoes

    2009-07-01

    An adverse reaction in blood transfusion is the graft versus host disease (GVHD). This disease affects immunodeficient or immunosuppressed patients where transfused T cells proliferate and initiate a host's immune system reaction. Blood gamma irradiation is the most efficient way to inhibit lymphocyte T blastic transformation and mitotic activity and it is the most effective method to combat this disorder. However, there is no fast and effective system to analyze the dose distribution in the irradiation process and guarantee that the absorbed doses are in agreement with FDA recommendations. This study aims to establish a periodic quality control of the gammacell irradiators using radiochromic films properly calibrated. The quality control is simply and effective to combat GVHD as well as is useful to detect mechanical fails at rotation set system through the dose uniformity analysis. It was possible to verify the uniformity ranged from -72.38% to 106.33% and some blood bag received doses not compatible with recommended international threshold. (author)

  4. Laboratory evaluation of hot metal de siliconizing process in ladle; Avaliacao laboratorial do processo de dessiliciacao do gusa na panela

    Energy Technology Data Exchange (ETDEWEB)

    Passos, Sergio R.M.; Furtado, Henrique S.; Bentes, Miguel A.G.; Almeida, Pedro S. de [Companhia Siderurgica Nacional, Volta Redonda, RJ (Brazil). Centro de Pesquisas

    1996-12-31

    The attractiveness of hot metal de siliconizing in ladle, relative to the process in blast furnace runner, is the previous knowledge of silicon content of hot metal, without the constraints of slag removing by skimmer met in torpedo car, and the better efficiency in low range silicon content, making easier the process controllability. Meanwhile, the main question about this technology is the extent of the resulfurization of hot metal that may occur due to process be performed after the desulfurization. This work simulates de de siliconizing process in ladle by experiments in induction furnace to compare the efficiencies of various de siliconizing agents available at CSN iron and steel making plant, and to evaluate the resulfurization intensity able to occur during the process, as well as, unexpected increasing of refractory wear. (author) 4 refs., 8 figs., 6 tabs.

  5. Evaluation of process variables in obtaining of organo clays; Avaliacao das variaveis de processo na obtencao de argilas organofilicas

    Energy Technology Data Exchange (ETDEWEB)

    Costa, D.L.; Cardoso, M.A.F.; Ferreira, H.S.; Neves, G.A.; Ferreira, H.C. [Universidade Federal de Campina Grande (CCT/UFCG), PB (Brazil). Centro de Ciencais e Tecnologia. Unidade Academica de Engenharia de Materiais], e-mail: danubialisboa@gmail.com

    2008-07-01

    The Paraiba state is the greater producing of bentonite in Brazil, for several industrial uses. In this production the Na{sup +} bentonite are distinguished, that when treated with ionic surfactants are used in based oil drilling fluids. The national production of organoclays for based oil drilling fluids is very poor, so this product is imported by PETROBRAS, from America. This present work has as objective the study of involved basic organofilization variable process such as: speed of agitation, temperature and time of cure preparation of organoclays, using bentonite clays Brasgel PA and Cloisite NA{sup +}, later treated with the ionic surfactant Praepagem WB. Organoclays had been characterized by X-ray and swell of Foster to determine the organoclays compatibility with the oil ways and to correlate the variable studied with the gotten results. (author)

  6. Sacroiliitis: imaging evaluation; Sacroiliite: avaliacao por imagem

    Energy Technology Data Exchange (ETDEWEB)

    Montandon, Cristiano; Teixeira, Kim-Ir-Sen Santos [Clinicas da Imagem e Multimagem, Goiania, GO (Brazil); Costa, Marlos Augusto Bitencourt; Carvalho, Tarcisio Nunes; Montandon Junior, Marcelo Eustaquio [Universidade Federal de Goias, Goiania, GO (Brazil). Faculdade de Medicina. Dept. de Diagnostico por Imagem]. E-mail: cmontandon@terra.com.br

    2007-01-15

    Sacroiliitis is a non-infectious inflammatory process involving the sacroiliac joint, and is a diagnostic criterion for seronegative spondyloarthropathies. Imaging methods are of great value for confirming the diagnosis of this condition. The present study is a review of cases included in didactic files and in the literature to illustrate the anatomy, techniques, and main imaging findings in x-ray, computed tomography and magnetic resonance imaging for determining the diagnosis of sacroiliitis, also approaching main differential diagnoses. (author)

  7. Residual stress evaluation and curvature behavior of aluminium 7050 peen forming processed; Avaliacao da tensao residual em aluminio 7050 conformado pelo processo peen forming

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, R.R. de; Lima, N.B., E-mail: rolivier@ipen.b, E-mail: nblima@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Braga, A.P.V.; Goncalves, M., E-mail: anapaola@ipt.b, E-mail: mgoncalves@ipt.b [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil)

    2010-07-01

    Shot peening is a superficial cold work process used to increase the fatigue life evaluated by residual stress measurements. The peen forming process is a variant of the shot peening process, where a curvature in the plate is obtained by the compression of the grains near to the surface. In this paper, the influence of the parameters such as: pressure of shot, ball shot size and thickness of aluminum 7050 samples with respect to residual stress profile and resulting arc height was studied. The evaluation of the residual stress profile was obtained by sin{sup 2} {Psi} method. (author)

  8. Control loop performance evaluation and diagnostic in the oil refining process; Avaliacao de desempenho e diagnostico das malhas de controle no processo de refino de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Regina Lucia de A.; Pavanelli, Paula E. [Chemtech, Rio de Janeiro, RJ (Brazil); Miranda, Filipe Costa Pinto dos R. [PETROBRAS S.A., Maua, SP (Brazil). Refinaria de Capuava (RECAP)

    2008-07-01

    Management Assets has been a theme treated with growing priority and importance by Processes Industry. Control loops are important assets to guarantee the security and operational stability of processes when they present a good performance. Usually there are a large number of control loops in processes units and their initial investment and maintenance costs are expensive. Human evaluation of control loops, in a non-systematic way, does not identify all the problems that can degrade regulatory control performance, and this the main reason to use systematic monitoring and evaluation techniques and software tools necessary to keep loops efficient. This work describes the continuous activity of monitoring and evaluation of the control systems of a petroleum refinery. Depending on some performance indexes, the loops are prioritized and some actions are taken (valve maintenance or tuning adjustment) to improve control loop performance and to avoid the reduction of product quality, raw material and utilities waste and even unit shutdown. (author)

  9. Residual stress evaluation and curvature behavior of aluminum 7050 peen forming processed; Avaliacao da tensao residual em aluminio 7050 conformado pelo processo peen forming

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Rene Ramos de

    2011-07-01

    Shot peening is a superficial cold work process used to increase the fatigue life evaluated by residual stress measurements. The peen forming process is a variant of the shot peening process, where a curvature in the plate is obtained by the compression of the grains near to the surface. In this paper, the influence of the parameters such as: pressure of shot, ball shot size and thickness of aluminum 7050 samples with respect to residual stress profile and resulting arc height was studied. The evaluation of the residual stress profile was obtained by sin{sup 2} {psi} method. The results show that the formation of the curvature arc height is proportional to the shot peening pressure, of spheres size and inversely proportional to the thickness of the sample, and that stress concentration factor is larger for samples shot peened with small balls. On final of this paper presents an additional study on micro strain and average crystallite size, which can evaluate the profile of the samples after blasting. (author)

  10. Evaluation of peach palm (Bactris gasipaes Kunth) processed by radiation; Avaliacao do palmito pupunha (Bactris gasipaes Kunth) processado por radiacao ionizante

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Priscila Vieira da

    2009-07-01

    The peach palm can be obtained from several species of palms, but the peach palm has attracted great interest by producers, as has characteristics of precocity, rusticity and tillering, producing a palm-quality differentiating it from other palmettos for their sweet flavor and yellowish . The food irradiation has been used as a treatment to ensure microbiological food safety of products to avoid infection. Its use combined with minimal processing could increase the safety and quality of minimally processed vegetables. We aimed at evaluating the effect of gamma radiation and electron beams to control bacteria; assess the physical characteristics through analysis of color and texture in peach palm in natura minimally processed and subjected to ionizing radiation stored at 8 deg C as well as evaluating the sensory characteristics. The results in the microbiological analysis showed that ionizing radiation promotes reduction of microbial load in both treatments. In the analysis of color we can conclude that among all the treatments the sample irradiated with 1.5 kGy showed more differences when compared with the other samples. Observing texture characteristics we could conclude that irradiation changed the texture of the palm, unlike the treatment by electron beams that showed no difference between samples. For the sensory analysis, the gamma radiation with dose of 1.5 kGy, induced changes in sensory properties to the attributes and overall appearance. The dose of 1 kGy caused no significant difference, so a recommended dose for the irradiation of the studied product. (author)

  11. Evaluation of peach palm (Bactris gasipaes Kunth) processed by radiation;Avaliacao do palmito pupunha (Bactris gasipaes Kunth) processado por radiacao ionizante

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Priscila Vieira da

    2009-07-01

    The peach palm can be obtained from several species of palms, but the peach palm has attracted great interest by producers, as has characteristics of precocity, rusticity and tillering, producing a palm-quality differentiating it from other palmettos for their sweet flavor and yellowish . The food irradiation has been used as a treatment to ensure microbiological food safety of products to avoid infection. Its use combined with minimal processing could increase the safety and quality of minimally processed vegetables. We aimed at evaluating the effect of gamma radiation and electron beams to control bacteria; assess the physical characteristics through analysis of color and texture in peach palm in natura minimally processed and subjected to ionizing radiation stored at 8 deg C as well as evaluating the sensory characteristics. The results in the microbiological analysis showed that ionizing radiation promotes reduction of microbial load in both treatments. In the analysis of color we can conclude that among all the treatments the sample irradiated with 1.5 kGy showed more differences when compared with the other samples. Observing texture characteristics we could conclude that irradiation changed the texture of the palm, unlike the treatment by electron beams that showed no difference between samples. For the sensory analysis, the gamma radiation with dose of 1.5 kGy, induced changes in sensory properties to the attributes and overall appearance. The dose of 1 kGy caused no significant difference, so a recommended dose for the irradiation of the studied product. (author)

  12. Evaluation of breast cancer through mammographies and image digital processing; Avaliacao do cancer de mama atraves de mamografias e processamento digital de imagens

    Energy Technology Data Exchange (ETDEWEB)

    Crestana, Rita H.S.

    1996-12-31

    The state of art of image processing has provided important advances to many scientific investigation areas particularly to medical own. This work exploits the potentiality of using image processing techniques for analyzing breast phantoms and mammographies. 36 refs., 62 figs.

  13. Evaluation of advanced oxidative processes in contaminated soil of the Pernambuco state; Avaliacao dos processos oxidativos avancados num solo contaminado do estado de Pernambuco

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Paula T.S. e [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Quimica; Santos, Suenia S. [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Engenharia Quimica; Barros Neto, Benicio de [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Quimica Fundamental; Dorea, Haroldo S. [Universidade Federal de Sergipe (UFS), Aracaju, SE (Brazil); Motta Sobrinho, Mauricio A. da; Silva, Valdinete L. da [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil)

    2004-07-01

    In this work were used the following techniques of advanced oxidative processes: hydrogen peroxide, Fenton reagent and heterogeneous photocatalysis (TiO2). These processes have shown as an alternative technology to the treatment of some environmental matrices. The soil studied was contaminated by an oil mixture proceeding from an emptying in the patio of an industry of the state of Pernambuco. This soil has about 14,5 g/Kg of total organic carbon and 3400 mg/kg of TPH. Two planning factorial 23 were composed: one in relation to hydrogen peroxide and the other to titanium dioxide, in order to find the best conditions for the contaminant degradation. The variables and the studied levels for the former was: FeSO4 - 0,18 M (without, 4 and 8 ml); Adjustment of pH (3, without, without); Time of exposition to the sun (8h, 12h, 16h). The volumes of used peroxide in the assays were 80 and 40 ml. In relation to the second planning, were studied the following conditions: TiO2 (g) (without,5;0,75;1,0), volume H2O (0, 2,5 and 5 ml) and time of exposition to the sun (8, 40, 72h). In relation to the first planning a destruction of 84% of the oil was achieved. However, in relation to 2nd the planning non-significant degradation was obtained, and to study other conditions ought to be investigated. (author)

  14. Evaluation of occupational exposure during the exploration and physical processing of monazite; Avaliacao das exposicoes ocupacionais durante as etapas de exploracao e beneficiamento fisico da monazita

    Energy Technology Data Exchange (ETDEWEB)

    Farias, Joao Torres de

    2006-07-01

    In Brazil the most important concentrations of monazite sands occur in the beaches and sandbanks that extend throughout the coast, from the State of Rio Grande do Norte down to the State of Rio Grande do Sul, Brazil. Nowadays, the most important Brazilian monazite concentrations - considered as being the fourth worldwide reservoir of rare-earth elements - are located at the north seacoast of the State of Rio de Janeiro, near Buena town. At this location the Brazilian Nuclear Industries - INB - manages an industrial complex for prospecting, mining and physical separation and concentration of monazite sands. Among the elements present at the monazite sands there are the radioelements thorium and uranium, which make the monazite sand a radioactive mineral. Monazite is constituted basically of 62% in TR{sub 2}0{sub 3} (rare-earth oxides), 5,5% of thorium in Th0{sub 2} (thorium oxide) and 0,25% of uranium in U{sub 3}0{sub 8} (uranium oxide). The general objective of the present work was to estimate the occupational doses at the industrial complex for prospecting, mining and physical separation and concentration of monazite sands located at Buena, at the north of the State of Rio de Janeiro. The occupational exposures occur mainly through the inhalation of airbone dust particles of mineraIs containing thorium and uranium, during the prospection and physical separation and concentration of monazite. To evaluate the impact of the occupational exposures during the physical separation and concentration of monazite, it was necessary to evaluate the effective equivalent doses due to thorium contamination of the air and the exposures due to the daughter radionuclides from the natural series of uranium and thorium. The results obtained at the present work showed that, although occupational doses are within the annual dose limits established by the Brazilian regulatory authority - CNEN - in some of the working places within the industrial complex the concentrations of

  15. Energetic evaluation: public schools sector; Avaliacao energetica: setor escolas publicas

    Energy Technology Data Exchange (ETDEWEB)

    Jota, Patricia Romeiro da Silva; Ribeiro, Mariane Correa; Martins, Fernando Henrique Dias; Silva, Valeria R. Borges da [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET-MG), Belo Horizonte, MG (Brazil). Centro de Pesquisa em Energia Inteligente

    2010-07-01

    Energy consumption evaluation at schools is very important for school management. However, there is a great difference among consumption rates, and a simplified analysis would lead to wrong evaluation. It is not possible to analyze schools that have different number of students or different sizes, unless these variables are applied. This article proposes a methodology in order to develop a sector analysis taking into account operation features. A case study is presented to illustrate this methodology. (author)

  16. Seismic evaluation of nuclear installations; Avaliacao sismica de instalacoes nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Mattar Neto, Miguel [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    1997-10-01

    Some considerations regarding extreme external events, natural or man-induce, such as earthquakes, floods, air crashes, etc, shall be done for nuclear facilities to minimizing the potential impact of the installation on the public and the environment. In this paper the main aspects of the seismic evaluation of nuclear facilities (except the nuclear power reactors) will be presented based on different codes and standards. (author). 7 refs., 2 tabs.

  17. Environmental evaluations of chemical processes by using environmental indexes - case study: the hydroconversion of residues; Avaliacao de processos quimicos com o uso de indicadores ambientais - estudo de caso: a hidroconversao de residuos

    Energy Technology Data Exchange (ETDEWEB)

    Carbonell, Montserrat Motas [PETROBRAS, Rio de Janeiro, RJ (Brazil)]. E-mail: montserrat@petrobras.com.br; Guirardello, Reginaldo [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Quimica. Dept. de Processos Quimicos]. E-mail: guira@feq.unicamp.br

    2004-07-01

    The environmental evaluation of a chemical process during its development, design or retrofit is important to reduce environmental impacts of industrial processes. This is called design for the environment (DfE) and has been done through the development and use of environmental indicators. This paper presents a brief literature review, discussing the main characteristics and comparing two selected environmental indicators. The paper also presents the 'Heinzle et al. (1998) modified method', adapted for the use in the evaluation of petroleum refining process. The environmental indicator is based on mass balances through defined regions and qualitative scales to consider the environmental aspects of: availability of raw materials resources, environmental impacts in the synthesis of raw materials, air and water pollution and special problems for disposal. This indicator helps in the identification of major loss and environmental problems in process components, streams or schemes so that process alternatives can be proposed and evaluated, leading to the development of environmentally friendly processes. The Heinzle et al. modified method is applied to the hydroconversion reaction balance region, showing the calculation of the environmental factor of the pseudo components. (author)

  18. Evaluation of the effects of gamma radiation in minimally processed vegetables of Brassica oleracea species; Avaliacao dos efeitos da radiacao gama em vegetais da especie Brassica oleracea minimamente processados

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Thaise Cristine Fernandes

    2009-07-01

    The consumption of collard greens (Brassica oleracea cv. acephala) and broccoli (Brassica oleracea L. var. italica) has been inversely associated with morbidity and mortality caused by degenerative diseases. These species are highly consumed in Brazil, which enables its use as minimally processed (MP). The growing worldwide concern with the storage, nutritional quality and microbiological safety of food has led to many studies aimed at microbiological analysis, vitamin and shelf life. To improve the quality of these products, radiation processing can be effective in maintaining the quality of the product, rather compromising their nutritional values and sensory. The aim of this study was to evaluate the effectiveness of gamma radiation from {sup 60}Co at doses of 0, 1.0 and 1.5 kGy on the reduction of microbiota in these plants, and analyze their nutritional and sensory characteristics. The methodology used in this study was microbiological analysis, colorimetric analysis, analysis of phenolic compounds, antioxidant analysis and sensory analysis. The microbiological analysis showed a decrease in the development of populations of aerobic microorganisms, psychotropic and yeast and mold with increasing doses of radiation. The sensory analysis showed no significant difference between different times of cooking analyzed. The analysis of phenolic compounds, significant differences between the samples, suggesting that with increasing dose of irradiation was an increase in the amount of phenolic compounds found in broccoli and collard greens MP. It can be observed that the sample of control collard greens showed high antioxidant activity and for the samples treated by irradiation was a decrease of percentage. In contrast the samples of broccoli show an increase in the rate of scavenging DPPH with increase of the dose of radiation. The colorimetric analysis revealed that for samples of MP collard greens and broccoli foil of no significant differences, but for samples of

  19. Evaluation of the effects of gamma radiation on physicochemical characteristics of kiwi (Actinidia deliciosa) cv. Hayward minimally processed; Avaliacao dos efeitos da radiacao gama nas caracteristicas fisico-quimicas de kiwi (Actinidia deliciosa) cv. Hayward minimamente processado

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Ana Claudia Sampaio

    2011-07-01

    The search for a healthy life has led consumers to rethink their eating habits, consuming fruits and vegetables in place of manufactured products, therefore, the demand for minimally processed products has evolved rapidly. The kiwi fruit (Actinidia deliciosa) has high nutritional value, being rich in C vitamin especially, which has wide acceptance in consumer markets. Thus, along with papaya, passion fruit and pineapple, kiwi can be considered as an additional feature of C vitamin in the diet, or as a substitute for traditional citrus. The aim of this study was to assess the effects of gamma radiation on physical and chemical characteristics of kiwis minimally processed and stored under refrigeration, since this technology increases the shelf life of fruits and vegetables. The Kiwis was stripped, processed and cut into slices, stored in polyethylene bags of 10 cm squared and irradiated at doses of 0 (control), 1 and 2 kGy. A source of {sup 60}Co Gammacell 220, dose rate of 0.429 kGy/hour, in which each treatment had 5 replicates with 15 slices of kiwifruit per replicate. After irradiation the samples were stored in a climatic chamber at 6 degree C (near the temperature of commercial refrigerators). The following criteria were physical chemical analysis: pH, color, chlorophyll content, loss of weight, moisture, acidity and Brix. The analysis were done on 1{sup st}, 7{sup th} and 14{sup th} days after irradiation. The results indicated that gamma radiation did not induce deleterious changes in the physicochemical properties of the kiwi may be used for preservation of minimally processed kiwifruit. (author)

  20. Evaluation of the environmental licensing process for small hydroelectric power plants in Minas Gerais state, Brazil; Avaliacao do processo de licenciamento ambiental para pequenas centrais hidreletricas no estado de Minas Gerais

    Energy Technology Data Exchange (ETDEWEB)

    Pedreira, Adriana Coli

    2004-07-01

    The present situation of the environmental licensing process have been slow and complicated, in relation to the current conception of the sustainable environmental development in the country. The enterprises and impacting activities are being discussed and analysed through a great number of environmental laws and specific laws to each enterprise. These laws along with the inexperience of the enterprises and of the many institutions involved in the process are an obstacle to the development. This document presents the legal and institutional aspects of the environmental licensing for the implementation of small hydroelectric power plants. Laws and doctrine related to the topic were researched and concluded for Minas Gerais State with the help of a survey with the enterprises and institutions involved in the process to find out the difficulties that influence the delay of the analysis of the SHPP. The results show that the main barriers are the non-application of the CONAMA resolution 279/2001 to the SHPP, undetermined inspection criteria, excess of environmental programs, technical incapacity, lack of financial resources, non-integration of the institutional organs, the building of SHPP in permanent preservation area, project interfering in the fish fauna, studies an environmental impact with then reports and public audiences. Finally, concludes that the difficulties are based on the non-integration of the institutions and also, being recent, on the inexperience of the actors involved. Therefore, the study suggests on increase of the technical body in the institutions and training of their analysts; hiring of specialized consultancy, implantation of an environmental integrated system, social communication program in the planning phase, fulfillment of the CONAMA resolution 279/2001; integration of public ministry representatives in the licensing organs; application of planning and zoning, deadlines and legal imposition of these deadlines in order to supply the

  1. An evaluation of the participation of the social movements on the decision making process and planning of the electric sector; Uma avaliacao da participacao dos movimentos sociais no planejamento e no processo decisorio do setor eletrico

    Energy Technology Data Exchange (ETDEWEB)

    Moral Hernandez, Francisco del; Bermann, Celio [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia. Programa Interunidades de Pos-graduacao em Energia]. E-mail: delmoral@hotmail.com; cbermann@iee.usp.br

    2006-07-01

    This work presents some reflexions on the possibility of a public sphere in the decision making process in the energetic sector. By using the conceptual mark of Juergen HABERMAS, some reflexions on the political participation specificities at Latin America, mainly those ones suggested by AVRITZER (2002) and the theoretical reflexions of HONNETH (2003) recognition fight and construction in the social movements, the work tries the verification of how far the requirements of social organizations identified in this work are from a desirable situation, or else a more effective participation of the social movements on the decisions and planning spaces and the deliberative character of the public discussion space in the area of energy.

  2. Evaluation of inflammatory processes in temporomandibular joint employing technetium-99m-labelled autologous leukocytes in an animal model; Avaliacao de processos inflamatorios na articulacao temporomandibular empregando leucocitos autologos marcados com tecnecio-99m em modelo animal

    Energy Technology Data Exchange (ETDEWEB)

    Brasileiro, Claudia Borges [Centro Universitario Newton Paiva, Belo Horizonte, MG (Brazil)]. E-mail: claudiabb.prof@newtonpaiva.br; cbbrasileiro@bol.com.br; Cardoso, Valbert Nascimento; Ruckert, Bianca [Minas Gerais Univ., Belo Horizonte, MG (Brazil). Faculdade de Farmacia; Campos, Tarcisio Passos Ribeiro de [Minas Gerais Univ., Belo Horizonte, MG (Brazil). Escola de Engenharia. Dept. de Engenharia Nuclear

    2006-07-15

    Objective: the present study was aimed at identifying temporomandibular joint inflammatory processes employing technetium-99m hexamethyl propylene amine oxime (99mTc-HMPAO)-labeled autonomous leukocytes. Materials and methods: we have utilized an experimental model of arthritis induction in ten adult male New Zealand rabbits by means of ovalbumin intra-articular injection into each left temporomandibular joint. For control purposes, saline solution was injected. After leukocytes radiolabeling with 99mTc-HMPAO and injection into rabbits, scintigraphic images were obtained. Results: a higher 99mTc-HMPAO-leukocytes uptake was observed in left temporomandibular joint in comparison with the contralateral joint. Wilcoxon non-parametric test was applied for statistical analysis. There was a statistically significant difference between counts of radioactivity per minute in the inflamed joint and the contralateral one (p = 0.0073). Conclusion: the method employing 99mTc-HMPAO-labelled autologous leukocytes allows an early and accurate detection of inflammatory processes, contributing to the adoption of a therapeutic conduct for patients before structural alterations have occurred. (author)

  3. Evaluation of synergistic effect in vacuum pack, refrigeration and irradiated treatments of minimally processed cassava; Avaliacao do efeito sinergistico da embalagem a vacuo, irradiacao e refrigeracao da mandioca minimamente processada

    Energy Technology Data Exchange (ETDEWEB)

    Pedroso, Bianca Maria

    2005-07-01

    Cassava is cultivated almost all over the world and it is considered one of the most important nutritious sources of calories in the human diet. Cassava is a viable food against starvation in several poor areas of the world because it is an extremely resistant culture and may reach satisfactory economical yield. We utilized vacuum packed industrialized cassava irradiated with 0,1 kGy, 3kGy and 5kGy and stored under refrigeration for 1, 21, 30 and 50 days. Our objective was to analyse the synergistic effect of vacuum packing, irradiation and refrigeration on the preservation of minimally processed cassava. The samples were analyzed for pH, acidity, weight, humidity, texture and color. The irradiation did not affect the chemical characteristics of the cassava. Neither the pH nor the acidity, the most relevant variables to verify deterioration in cassava, presented significant alterations during the period of storage. Comparing the irradiated treatments, the dose of 1kGy and 3kGy affected the physic-chemical characteristics of the cassava the least during the period of storage and refrigeration for 50 days; the doses of 1kGy,3kGy and 5kGy scored the highest rates the sensorial analysis during the period of storage for 21 days. (author)

  4. Impacts evaluation: recent experience in rural electrification; Avaliacao de impactos: experiencia recente em eletrificacao rural

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Marcio Giannini; Rodrigues, Alexia de Freitas; Paz, Luciana Rocha Leal da [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Camacho, Cristiane Farias [Fundacao Padre Leonel Franca (FPLF), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The electric power is one of the important requirements for the promotion of the social inclusion and of the development, especially in rural areas. In order to fill out this gap, the Brazilian government established as a goal reaches the universalization of the public electric energy services to provide conditions for the improvement of the quality of life of the urban and rural population. In this sense, the evaluation of the recent experiences in rural electrification can be of great help to achieve this objective in an efficient way. The results of such evaluation can point out some actions for the universalization of the attendance seeking for the continuous improvement of the planning and decision making process, either in the direction of the attendance of the proposed goals or in the poverty mitigation. (author)

  5. Severe bronchiectasis in a dog: tomographic evaluation; Severa bronquiectasia em um cao: avaliacao tomografica

    Energy Technology Data Exchange (ETDEWEB)

    Babicsak, Viviam Rocco; Campos, Lidice Araujo; Belotta, Alexandra Frey; Oliveira, Hugo Salvador de; Inamassu, Leticia Rocha; Charlier, Murilo Gomes de Soutello; Mamprim, Maria Jaqueline; Vulcano, Luiz Carlos, E-mail: viviam.babicsak@gmail.com [Universidade Estadual Paulista Julio de Mesquita Filho (FMVZ/UNESP), Botucatu, SP (Brazil). Faculdade de Medicina Veterinaria e Zootecnia. Dept. de Reproducao Animal e Radiologia Veterinaria

    2012-07-01

    Bronchiectasis is a bronchial dilatation caused by changes in the bronchial wall usually due to infectious processes. Computed tomography is an important imaging modality for the evaluation of this alteration due to its high sensitivity. In this study we describe the case report of a 6-year-old female mixed breed dog with severe and generalized bronchiectasis on computed tomography. Due to the severe extent of bronchiectasis, the method of measurement of the adjacent pulmonary artery and its relationship to the bronchus did not have to be performed. An indirect sign of bronchiectasis identified in the patient was the bronchial wall thickening, possibly due to the infiltration of inflammatory components, edema and even by peri-bronchial abscesses. (author)

  6. Evaluation of protection measurements for urban environments; Avaliacao de medidas de protecao para ambientes urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Rochedo, Elaine R.R., E-mail: erochedo@cnen.gov.b [Comissao Nacional de Energia Nuclear (CODIN/CNEN), Rio de Janeiro, RJ (Brazil). Coord. de Instalacoes Nucleares; Silva, Diogo N.G.; Nascimento, Udilma; Conti, Luiz F., E-mail: dneves@ird.gov.b, E-mail: lfcconti@ird.gov.b, E-mail: udilma@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Wasserman, Maria Angelica V., E-mail: maria.wasserman@pq.cnpq.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2011-10-26

    Radioactive accidents has shown the necessity of a previous evaluation planning of exposure and directives for implementation of protection measurements. The description or measurements in the literature usually is associated to reduction of concentrations in the medium where they are applied. For verification the efficiency in dose reduction, it is necessary to proceed simulations. Through the development of data base on protection measurements, it was established basic sceneries, typically tropical as far the building type is concerned and the construction material. The program SIEM was used for simulation of contamination with {sup 137}Cs. The results indicates that generic solutions persuade not to and the decision make processes should be effectuated according to the real conditions of contamination and the use of affected area. For affected areas, two classification criteria were defined: (1) efficiency in reducing the dose in the first year; and (2) efficiency in dose reducing at long term

  7. Model of global evaluation for energetic resources; Modelo de avaliacao global de recursos energeticos

    Energy Technology Data Exchange (ETDEWEB)

    Fujii, Ricardo Junqueira; Udaeta, Miguel Edgar Morales; Galvao, Luiz Claudio Ribeiro [Universidade de Sao Paulo (USP), SP (Brazil). Dept. de Energia e Automacao Eletricas. Grupo de Energia]. E-mail: ricardo_fujii@pea.usp.br; daeta@pea.usp.br; lcgalvao@pea.usp.br

    2006-07-01

    The traditional energy planning usually takes into account the technical economical costs, considered alongside environmental and a few political restraints; however, there is a lack of methods to evenly assess environmental, economical, social and political costs. This work tries to change such scenario by elaborating a model to characterize an energy resource in all four dimensions - environmental, political, social and economical - in an integrated view. The model aims at two objectives: provide a method to assess the global cost of the energy resource and estimate its potential considering the limitations provided by these dimensions. To minimize the complexity of the integration process, the model strongly recommends the use of the Full Cost Accounting - FCA - method to assess the costs and benefits from any given resource. The FCA allows considering quantitative and qualitative costs, reducing the need of quantitative data, which are limited in some cases. The model has been applied in the characterization of the region of Aracatuba, located in the west part of the state of Sao Paulo - Brazil. The results showed that the potential of renewable sources are promising, especially when the global costs are considered. Some resources, in spite of being economically attractive, don't provide an acceptable global cost. It became clear that the model is a valuable tool when the conventional tools fail to address many issues, especially the need of an integrated view on the planning process; the results from this model can be applied in a portfolio selection method to evaluate the best options for a power system expansion. It has to be noticed that the usefulness of this model can be increased when adopted with a method to analyze demand side management measures, thus offering a complete set of possible choices of energy options for the decision maker. (author)

  8. Toxicological evaluation of natural rubber films from vulcanized latex by the conventional process and the alternative process with ionizing radiation; Avaliacao toxicologica de filmes de borracha natural obtidos do latex vulcanizado pelo processo convencional e pelo processo alternativo com radiacao ionizante

    Energy Technology Data Exchange (ETDEWEB)

    Campos, Vania Elisabeth

    1997-07-01

    The industrial vulcanization of natural rubber latex (NRL) is made all over the world by conventional process using sulphur and heat but it can be made by an alternative process using ionizing radiation. In this research the NRL was tested by 13 physical, chemical and mechanical assays which showed its good quality. It was done a preliminary study of the toxicological properties of 4 natural rubber films obtained by casting process of NRL: one non vulcanized, other vulcanized by the conventional process and two vulcanized by the alternative process. In the alternative process the films were obtained by irradiation of NRL by gamma rays from the {sup 60} Co source at 250 kGy in the absence of sensitizer and irradiated NRL at 12 kGy in the presence of 4ph r of n-butyl acrylate / 0.2 phr of KOH. These vulcanization doses were determined from broken tensile strength. In the conventional process, sulphur vulcanized NRL was made using a classical composition. Another film was made with non vulcanized NRL. The preliminary evaluation of the toxicological properties was made from in vitro cytotoxicity and in vivo systemic toxicity assays. The LBN films vulcanized by the alternative process have less cytotoxicity than the NRL film vulcanized by the conventional process. The sensitized vulcanized films by gamma rays and non vulcanized films showed similar cytotoxicity while the vulcanized films without sensitizer showed a slight lower cytotoxicity. The non vulcanized NRL film and the NRL films vulcanized by the alternative process did not show toxic effects in the 72 hours period of the systemic toxicity assay. However the NRL film vulcanized with sulphur induced effects like allaying and motor in coordination on the animals treated with an oil extract at the fourth hour and recovering after that. The alternative process promoted lower toxic effects than conventional process because there was no toxic substances present. (author)

  9. CT in the evaluation of severe liver trauma; Tomografia computadorizada na avaliacao do trauma hepatico grave

    Energy Technology Data Exchange (ETDEWEB)

    Machado, Marcel Autran C. [Sao Paulo Univ., SP (Brazil). Faculdade de Medicina, Hospital das Clinicas; Souza Rocha, Manoel de; Machado, Manoel C.C. [Sao Paulo Univ., SP (Brazil). Faculdade de Medicina; Macedo Neto, Augusto Cesar de; Maciel, Rosangela Pereira; Simonetti, Celso

    1995-05-01

    Abdominal CT is a common examination in the evaluation of patients with blunt abdominal trauma and clinical suspicion for solid organ injury when reasons for immediate laparotomy are not present. A case of major blunt hepatic injury in a 22-year-old patient is reported. The authors present a brief review of the literature and discussion about the role of CT scan in the evaluation of hepatic trauma, surgical planning and postoperative follow-up. (author). 15 refs., 3 figs., 1 tab.

  10. Computed tomography evaluation of mast cell tumours; Avaliacao por tomografia computadorizada dos mastocitomas

    Energy Technology Data Exchange (ETDEWEB)

    Lorigados, Carla Aparecida Batista; Matera, Julia Maria; Macedo, Thais; Pinto, Ana Carolina Brandao Fonseca, E-mail: clorigados@usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Faculdade de Medicina Veterinaria e Zootecnia. Dept. de Cirurgia

    2012-07-01

    The mast cell tumours are common tumours of the canine skin. Computed tomography (CT) has assumed an important role in tumours evaluation and staging. The aim of this study was to evaluate the role of CT as a method of assessing characteristics of mast cell tumors. Ten dogs with mast cell tumor were evaluated. CT was performed before and after the intravenous injection of hydro soluble ionic iodine. Attenuation, contrast enhancement, cleavage with adjacent tissues and the unidimensional measurement of each lesion was determined in it maximum diameter, in transversal plane. Concerning the attenuation characteristic, 50% were homogeneous and 50% heterogeneous. The contrast enhancement was homogeneous in 50% of cases, heterogeneous in 40% and peripheral in 10%. Fifty percent of the tumours showed loss of plane of cleavage and 30% partial loss. This information can help in directing the patients that will be undergoing chemotherapy or surgery. (author)

  11. LNG businesses evaluation: strategic positioning; Avaliacao de negocios de GNL: posicionamento estrategico

    Energy Technology Data Exchange (ETDEWEB)

    Toste, Ana Cristina Leitao Goncalves; Frozza, Eduardo [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Given the global development of the LNG industry and the changes it has suffered along the recent years, companies must evaluate how they should better position themselves towards this business, in order to optimize resources and maximize gains. The present work discusses three fictitious cases, in an effort to delineate and understand the several issues that impact a business decision in the LNG industry. In each case, business evaluation is performed taking into consideration project economics, as well as risk and strategy issues. (author)

  12. Evaluation of biological analysis program for iodine 131; Avaliacao do programa de bioanalise para Iodo-131

    Energy Technology Data Exchange (ETDEWEB)

    Gaburo, J.C.; Todo, A.S.; Potiens Junior, A.; Oliveira, E.M.; Sordi, G.M.A.A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    1997-12-31

    A program for the occupational control of internal contamination for the Radioisotopes Division workers of the IPEN-CNEN/SP has been performed by in vitro and in vivo bioassay techniques, every two weeks. From the assessment of the monitoring program, two groups of workers were identified in accordance with their activities and handling frequency {sup 131} I. The groups A and B are exposed five and three days respectively every week. In this program, urinalysis methods, thyroid and whole body measurements have been evaluated over the year. The sampling scheme, performed every two week, was altered for weekly, in order to minimize the interpretation errors and to get a better estimative of the intake. This study also provides and evaluation of the cost for the weekly urinalysis sampling method. (author) 6 refs., 1 fig.; e-mail: janetegc at net.ipen.br

  13. Computed radiography systems performance evaluation;Avaliacao de desempenho de sistemas de radiografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Xavier, Clarice C.; Nersissian, Denise Y.; Furquim, Tania A.C. [Universidade de Sao Paulo (IEE/USP), SP (Brazil). Inst. de Eletrotecnica e Energia

    2009-07-01

    The performance of a computed radiography system was evaluated, according to the AAPM Report No. 93. Evaluation tests proposed by the publication were performed, and the following nonconformities were found: imaging p/ate (lP) dark noise, which compromises the clinical image acquired using the IP; exposure indicator uncalibrated, which can cause underexposure to the IP; nonlinearity of the system response, which causes overexposure; resolution limit under the declared by the manufacturer and erasure thoroughness uncalibrated, impairing structures visualization; Moire pattern visualized at the grid response, and IP Throughput over the specified by the manufacturer. These non-conformities indicate that digital imaging systems' lack of calibration can cause an increase in dose in order that image prob/ems can be so/ved. (author)

  14. Evaluation of operation strategies of hybrid systems; Avaliacao de estrategias de operacao de sistemas hibridos

    Energy Technology Data Exchange (ETDEWEB)

    Hauschild, Luciano; Zilles, Roberto [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Inst. de Eletrotecnica e Energia. Lab. de Sistemas Fotovoltaicos]. E-mail: lucianoh@iee.usp.br

    2006-07-01

    This article evaluates the operation strategies of photovoltaic-eolic-diesel hybrid systems used for the rural area applied to two cases studies placed at the Cardoso Island, SP. The operation strategies evaluation is performed by simulation using data collected at the Cardoso Island such as electric power consumption profile and the solar and wind potential. With those data, simulation have been done considering different operation strategies and different levels of renewable energies penetration in the total energy produced by the system, in order to obtain system operation results such as Diesel oil consumption and depth of average discharge of the battery banks. From the simulation results an economic analysis have been done by using elements data from the cost of life average cycle (LAC) for determining which strategy is the most adequate for operation the electric power supply hybrid system.

  15. Imperfect twinning - evaluation by imaging methods; Gemelidade imperfeita - avaliacao pelos metodos de imagem

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, Arildo Correa; Julio, Hamilton [Parana Univ., Curitiba, PR (Brazil). Hospital das Clinicas. Disciplina de Ginecologia e Obstetricia; Mazer, Sergio; Urban, Linei Augusta Brolini Delle [Parana Univ., Curitiba, PR (Brazil). Hospital das Clinicas. Servico de Radiologia]. E-mail: lineiurban@hotmail.com

    2003-02-01

    Conjoined twins are rare malformations and a challenge for both radiologists and pediatric surgeons. Antenatal evaluation is essential for the identification of anatomic fusions and other associated abnormalities, which will enable an adequate surgical planning and the assessment of fetal prognosis. The authors present the clinical and imaging findings of thoracopagus twins, joined by the anterior portion of the thorax, sharing the heart and the liver. Diagnosis was made by ultrasonography and confirmed with fetal magnetic resonance imaging. (author)

  16. Evaluation of protection measurements for rural environments; Avaliacao de medidas de protecao para ambientes rurais

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Diogo N.G.; Silva, Fernanda L.; Conti, Luiz F., E-mail: dneves@ird.gov.b, E-mail: lfcconti@ird.gov.b, E-mail: fleite@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Wasserman, Maria Angelica V., E-mail: maria.wasserman@pq.cnpq.b [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Rochedo, Elaine R.R., E-mail: erochedo@cnen.gov.b [Comissao Nacional de Energia Nuclear (CODIN/CNEN), Rio de Janeiro, RJ (Brazil). Coord. de Instalacoes Nucleares

    2011-10-26

    Among the planning activities of actuation in nuclear/radiological emergences, it is included the efficiency evaluation of protection and remediation measurements. From the development of a data base on such measurements for the agricultural areas, the program SIEM was used for effectuation the simulations involving the {sup 137}Cs, {sup 131}I and {sup 90}Sr radionuclides, in scenery previously established for simulation those areas of a 50 km surrounding the Admiral Alvaro Alberto nuclear power plant. The obtained results indicate that the scenery is determinant of efficiency measurements involving various specific factors of each place, such as: agricultural and cattle breeding products, consumption habits of population and the grade of subsistence by the diet items, making not practical the elaboration of predefined generic sceneries. The great dependence on seasoning related to the moment of accident makes inadequate any previous evaluation what soever for evaluation of efficiency of protection and remediation measurements. Therefore, previous decisions are not recommended about the relevance of protection measurements for rural areas. Two classification criteria were defined: (i) the efficiency in reduction the doses in the firs year; and, (i i) efficiency in reduction the dose at long term

  17. Magnetic resonance imaging evaluation of traumatic muscle injuries; Avaliacao por ressonancia magnetica das injurias musculares traumaticas

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Elisa Pompeu [Santa Casa de Misericordia do Rio de Janeiro, RJ (Brazil); Marchiori, Edson [Universidade Federal Fluminense, Niteroi, RJ (Brazil). Dept. de Radiologia; Coutinho Junior, Antonio Carlos; Domingues, Romulo Cortes; Domingues, Romeu Cortes [Centro Medico Barrashopping, Rio de Janeiro, RJ (Brazil). Clinica de Diagnostico por Imagem (CDPI)

    2001-12-01

    We evaluated 43 magnetic resonance scans of the leg or thigh of patients suffering from sports trauma. Strains were the most frequent lesions observed. These lesions presented iso- or hypointense signal on T1 and hyperintense signal on T2 images, and were classified according to the intensity of the injury of the fibers into grades 1, 2 and 3. The second most common lesions in these series were contusions that appeared iso- or hypointense on T1 and hyperintense on T2 images. Fibrosis was also observed as low signal lesions on T1 and T2 images. (author)

  18. Algorithms evaluation for transformers differential protection; Avaliacao de algoritmos para protecao diferencial de transformadores

    Energy Technology Data Exchange (ETDEWEB)

    Piovesan, Luis Sergio

    1997-07-01

    The appliance of two algorithms is evaluated, one based in Fourier analysis and other based in a rectangular transform technique over Fourier analysis, to be used in digital logical circuits (digital protection relays) for the purpose of differential protection of power transformers (ANSI 87T). The first chapter has a brief introduction about electrical protection. The second chapter discusses the general problems of transform protection, the development of digital technology and, with more detail, the differential protection associated to this technology. In this chapter are presented the particular aspects of transformers differential protection concerning sensibility, inrush current situations and harmonic distortions caused by transformer core saturations and the differential protection algorithms and their applications in a specific relay design. In chapter three, a method to make possible testing the protection performance is developed. This work applies digital simulations using EMTP to generate current signal of transformer operation and fault conditions. Digital simulation using Matlab is used to simulate the protection. The EMTP generated field signals are sent to the relay under test, furnishing data of normal operation, internal and external faults. The relay logic simulator at Matlab will work this data and so, it will be possible to verify and evaluate the algorithm behavior and performance. Chapter 4 shows the protection operation over simulations of several of transformer operation and fault conditions. The last chapter presents a conclusion about the protection performance, discussions about all the methods applied in this work and suggestions for further studies. (author)

  19. Probabilistic evaluation of the Brazilian interconnected power systems; Avaliacao probabilistica do desempenho do sistema interligado brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Melo, A C.G.; Mello, J C.O.; Romero, S P; Oliveira, G C [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Fontoura Filho, R N [ELETROBRAS, Rio de Janeiro, RJ (Brazil)

    1994-12-31

    This paper describes the main features of the NH{sub 2} model, developed for the probabilistic evaluation of the adequacy of large scale power systems. The system analysis is carried out through a full set of indicators, including reliability indices and probability distributions of selected variables, such as area interchanges, power flow in circuits, voltage in buses etc. These indicators are calculated in two stages: before and after the introduction of remedial actions. Also, the model yields the representation of system hourly load curve, with uncertainty around the load levels. The flexibility and performance of the NH2 model are illustrated in case studies with a 1400-bus, configuration of the Brazilian system. (author) 12 refs., 11 figs., 6 tabs.

  20. Radiological evaluation of the cranio vertebral junction; Avaliacao radiologica da transicao cranio-vertebral

    Energy Technology Data Exchange (ETDEWEB)

    Mello, Silvia Marcal Benicio de; Haetinger, Rainer Guilherme [Med Imagem - Beneficiencia Portuguesa de Sao Paulo, SP (Brazil). Setor de Cabeca e Pescoco]. E-mail: sbm@uol.com.br; Schettini, Marianna Cunha; Lima, Sergio Santos [Med Imagem - Beneficiencia Portuguesa de Sao Paulo, SP (Brazil); Mourao, Maria Lucia; Mendonca, Renato Adam [Med Imagem - Beneficiencia Portuguesa de Sao Paulo, SP (Brazil). Setor de Neuroradiologia

    2005-04-15

    The cranio vertebral junction (CVJ) comprises the occiput, atlas, their joints and ligaments. Besides conventional x-rays other imaging methods are need for the assessment of CVJ including high resolution computerized tomography (CT) and magnetic resonance imaging (MRI) which provide specific parameters such as field of view, slice thickness and incremental movement of the patient. A dynamic study is also important to assess the stability of the cranio vertebral junction and the effect upon the bulbomedullary junction. The aim of this study is to review the techniques used in the evaluation of the CVJ, the semiological parameters, and the most frequent disorders affecting this region. We review the literature and present conventional x-ray, CT and MRI images from the didactic file of the Radiology service 'Med Imagem - Beneficiencia Portuguesa de Sao Paulo, SP, Brazil, of cases with normal anatomy and the main congenital and acquired disorders of the CVJ. In daily practice, CVJ disorders are diagnoses using CT and MRI scans of the head and cervical spine. It is essential to be familiar with these conditions in order to preform specific tests which will allow a detailed study of the CVJ, thus providing the basis for the treatment, whenever indicated. (author)

  1. Evaluation of a fruit solar dryer; Avaliacao de um secador solar de frutas

    Energy Technology Data Exchange (ETDEWEB)

    Berthier, L.J.; Bittencourt, J.; Queiroz, M.R.

    2000-07-01

    A study of the Nanica banana drying was carried out in a solar dryer with six trays operating with direct exposure of the product to the solar radiation and internal convection. The solar drying was performed College of Agricultural Engineering of the UNICAMP, Campinas, S.Paulo state, Brazil. The study aimed a 20 to 25 per cent final humidity of the dry product, result obtained in the different trays during a maximum drying period of 147 hours (6 days), in a batch system. During the drying period, the average temperature of the environment air at daylight was of 26 degree Celsius with a maximum of 32 degree Celsius, and 18 degrees Celsius during nocturnal period, with a minimum of 12,6 degree Celsius. In the inward of the dryer reached average values near to 50 degree Celsius, measured at noon. The 29,540 kg initial net weight of peeled banana was reduced to yield of 10,815 kg after the drying process, obtaining an income of 36,61 percent of the total production. With the values of the product weight loss, the curves of the drying in each tray had been built, observing that, in the upper trays reached the desired humidity in a lesser period.

  2. Evaluation of occupational exposure in intraoral radiography; Avaliacao da dose ocupacional em radiografia intraoral

    Energy Technology Data Exchange (ETDEWEB)

    Miguel, Cristiano; Barros, Frieda S.; Rocha, Anna S.P.S.; Godoi, Walmor C., E-mail: miguel_cristianoch@yahoo.com.br, E-mail: saicla@utfpr.edu.br, E-mail: annarocha@yahoo.com, E-mail: walmor.godoi@gmail.com [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Tilly Junior, Joao G., E-mail: joao.tilly@derax.com.br [Universidade Federal do Parana (HC/UFPR), Curitiba, PR (Brazil). Hospital das Clinicas

    2014-07-01

    The intraoral radiography is widely performed in the dental office due to low cost and agility. The doses in intraoral radiology are considered low, however it is known that doses below the threshold for deterministic radiation has the potential to induce stochastic effects. An intraoral radiography has a risk of inducing fatal cancer or serious in order of 1:10,000,000. Besides the patient, the dentist may also be being exposed to radiation during the work with the radiographics practices. The bibliographies demonstrates the lack of information on radiation protection of dentists, however, the occupational dose reduction was observed in radiology over the past 14 years. This work aims to evaluate the effective dose of radiation to which workers can be exposed dentists in dental offices to perform intraoral radiographs. In this context, a study was be conducted between June 2013 and May 2014 with 44 professionals in Curitiba city. For each dentist was given a personal dosimeter to be used for 30 days. During this period, the number of radiographies and the length of the cable triggers of the X-ray equipment was registered and, the dosimeter´s dose was read. It was observed that the cables triggers meet regulatory standards and allow dentists to get the mean minimum distance of two meters from the radiation source in 93% of cases. Through analysis of the doses, it was concluded that occupational exposures of these workers are within the recommended threshold by regulatory 453/1998 of the Ministry of Health from Brazil. (author)

  3. Application of nuclear magnetic resonance in osteoporosis evaluation; Aplicacoes de ressonancia magnetica nuclear na avaliacao de osteoporose

    Energy Technology Data Exchange (ETDEWEB)

    Giannoni, Ricardo A., E-mail: giannoni@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Montrazi, Elton T.; Bonagamba, Tito J., E-mail: elton.montrazi@gmail.com, E-mail: tito@ifsc.usp.br [Universidade de Sao Paulo (IFSC/USP), Sao Carlos, SP (Brazil). Inst. de Fisica; Cesar, Reinaldo, E-mail: reinaldofisica@gmail.com [Universidade de Sao Paulo (EESC/USP), Sao Carlos, SP (Brazil). Escola de Engenharia

    2013-07-01

    In this work, initially ceramic samples of known porosity were used. These ceramic samples were saturated with water. The nuclear magnetic resonance signal due to relaxation processes that the hydrogen nucleus water contained in the pores of this ceramic material was measured. Then these samples were subjected to a process of drying and measures successively. As the water contained in pores greater evaporates the intensity of signal decreases and shows the sign because of the smaller pores. The analysis of this drying process gives a qualitative assessment of the pore size of the material. In a second step, bones of animals of unknown porosity underwent the same methodology for evaluating osteoporosis. Also a sample of human vertebra in a unique manner, with the same purpose was measured. Combined with other techniques is a quantitative evaluation of the possible porosity.

  4. Evaluation of welding by MIG in martensitic stainless steel; Avaliacao da soldagem pelo processo MIG em aco inoxidavel martensitico

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, M.A. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil); Mariano, N.A.; Marinho, D.H.C. Marinho, E-mail: neideaparecidamariano@gmail.co [Universidade Federal de Alfenas (UNIFAL), Pocos de Caldas, MG (Brazil)

    2010-07-01

    This work evaluated structure's characterization and mechanical properties after the welding process of the stainless steel CA6NM. The employed welding process was the metal active gas with tubular wire. The control of the thermal cycle in the welding process has fundamental importance regarding the properties of the welded joint, particularly in the thermally affected zone. The mechanical properties were appraised through impact resistance tests and the hardness and microstructure through metallographic characterization and Ray-X diffraction. The parameters and the process of welding used promoted the hardness and toughness appropriate to the applications of the steel. Welding energy's control becomes an essential factor that can affect the temperature of carbide precipitation and the nucleation of the retained austenite in the in the region of the in the thermally affected zone. (author)

  5. Evaluation of the combined effect of the irradiation process and packaging in different atmospheres on microbiological and sensory quality of beef (Longissimus dorsi) fresh chilled and frozen; Avaliacao do efeito combinado do processo de irradiacao e da embalagem em diferentes atmosferas na qualidade microbiologica e sensorial de carne bovina (Longissimus dorsi) fresca refrigerada e congelada

    Energy Technology Data Exchange (ETDEWEB)

    Moreno, Maria Luz Garcia

    2001-07-01

    Meat, a nutritious food, allows the development of a wide variety of microorganisms which not only spoils it but offers risk to public health. Irradiation with medium doses can be efficiently use to control the presence of microorganisms in meat. Depending upon the dose, irradiation of meat can lead to formation of off-flavours, off odours and discoloration of meat packed with oxygen. These problems can probably be overcome using vacuum package or freezing temperatures. The aim of this research was to evaluate the effect of irradiation, vacuum packaging and temperature on the meat quality. Forty beef pieces (approx. 100g each) were packed under normal atmosphere, 40 were vacuum packed and 40 under N{sub 2} atmosphere. Half of each group was kept overnight under refrigeration and half was frozen. Refrigerated samples were irradiated with 0, 1, 1.5 and 2 kGy. Frozen samples were irradiated with 0, 1, 2 and 3 kGy. Number of microorganisms was significantly reduced (p<0.05) by de process. The temperature effect on the radioresistance of all microorganisms was not observed. Brochothrix thermosphacta was present in numbers of 10{sup 3} CFU/g in control samples and remained the same during all study and was detected only in refrigerated irradiated samples. Lactic acid bacteria were less affected by irradiation. Bacterial spores were found in both control and irradiated samples in low numbers (1-67 spores/g). Salmonella sp. and Staphylococcus sp. were not detected. The best combination of treatments to extend the shelf-life of refrigerated meat was vacuum packaging and an irradiation dose of 2 kGy. Nitrogen did not improve the color of irradiated meat. Refrigerated irradiated aerobically packaged meat was darker and less red than control samples. Frozen irradiated aerobically packaged meat was less red and lightener. The effectiveness of food irradiation is based on good quality of raw product. (author)

  6. Evaluation of personal protective devices used in diagnostic radiology; Avaliacao de dispositivos de protecao individual utilizados em radiologia diagnostica

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Fernanda Cristina Salvador

    2006-07-01

    In this work protective devices of five manufacturers were evaluated according to the NBR/IEC 61331-1 and NBR/IEC 61331-3 standards. Three different methodologies (linear interpolation, Archer model and sum of exponentials) were applied for the determination of the attenuation equivalent, since the standard does not indicate how it must be determined. Moreover, the uncertainties associated to each method, and the influence of the number of measurements in the combined uncertainty were estimated. The evaluated manufacture characteristics were: accompanying document, design, materials, dimensions and label marking. For this evaluation a check list about the requirements of the NBR/IEC 61331-3 standard was elaborated. The results showed a great difference between nominal and measured attenuation equivalent values. The comparison of the results using the three methodologies showed small variations among the obtained values and among the associated uncertainties in the different methodologies. It was possible to observe that the number of measurements does not contribute significantly for the increase of the uncertainty in all three methodologies. The best methodology for the laboratory routine is the linear interpolation methodology, with five measurements for each air kerma rate value. The discrepancy between the results obtained in this work and the requirements of the applied standards show the need to adopt a compulsory certification process for protective devices, thus contributing for the increase of the radiation protection of the users. (author)

  7. Angra 3 - economic and financial evaluation of the enterprise; Angra 3 - avaliacao economico-financeira do empreendimento

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Ronaldo Barata de [ELETROBRAS Termonuclear S.A. (ELETRONUCLEAR), Rio de Janeiro, RJ (Brazil)]. E-mail: rbarata@eletronuclear.gov.br

    2006-07-01

    This paper presents an updated economic-financial evaluation of Angra 3 Nuclear Power Plant project and estimates the lowest power tariff value at which power potentially made available may be commercialized and yet ensures the project a profitability level agreeable to the interests of economic agents and shareholders. According to the project evaluation practice, Angra 3 power generation was considered separately from ELETRONUCLEAR operating plants (Angra 1 and Angra 2), thus preventing result distortions bound to occur if the economic-financial variables of the new project were analyzed associated with financial commitments and commercialization conditions resulting from the project implementation process and the generated power commercialization conditions, respectively. For this evaluation different technical and economic scenarios were devised, and the theory of Capital Asset Pricing Model (CAPM) for Own Capital cost and that of Weighted Average Cost of Capital (WACC) were used in addition to the forecast of the Statement of Results and Free Cash flow of Shareholders throughout the power plant life, which is the estimate basis for the lowest power tariff value and the Internal Return Rate (IRR) of the project. (author)

  8. Energetic evaluation of a mechanical dryer (flex) to familiar agriculture; Avaliacao energetica de um secador mecanico (FLEX) para cafeicultura familiar

    Energy Technology Data Exchange (ETDEWEB)

    Donzeles, Sergio M.L. [Empresa de Pesquisa Agropecuaria de Minas Gerais (CTZM/EPAMIG), Vicosa, MG (Brazil). Centro Tecnologico da Zona da Mata], E-mail: slopes@ufv.br; Silva, Juarez S.; Martin, Samuel; Nogueira, R.M.; Silva, Jadir N.; Zanata, Fabio L. [Universidade Federal de Vicosa (DEA/UFV), MG (Brazil). Dept. de Engenharia Agricola], Emails: juarez@ufv.br, jadir@ufv.br, samuel.martin@ufv.br

    2009-07-01

    Actually, the coffee is one of the most important exportation crops of the country. The utilization of obsolete or unsuitable processes, specifically related to the coffee drying, it can to damage the final quality of the product, besides to result in a low profitability of the coffee growing. In this work a mechanical drier (flex) was built, for the familiar coffee growing, being subsequently evaluated, to the drying of peeled cherry coffee, by the realization of two tests: one with heating of the air using vegetable coal and other combining the use of solar heater with vegetable coal. Basing on the results, it was possible to conclude that the drying of coffee in the mechanical drier Flex can be carried out using vegetable coal as fuel as well as associating the use of the vegetable coal with the solar collector, to save energy. (author)

  9. Evaluation of external exposure in a radioactive waste deposit; Avaliacao da exposicao externa em um deposito de rejeitos radioativos

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Sergio Quinet de; Pereira, Wagner de Souza; Py Junior, Delcy de Azevedo; Dores, Luis Augusto de Carvalho Bresser; Dantas, Marcelino Vicente de Almeida; Silva, Ana Claudia Antunes; Garcia Filho, Oswaldo, E-mail: wspereira@inb.gov.b, E-mail: sergioquinet@inb.gov.b, E-mail: delcy@inb.gov.b, E-mail: luisdores@inb.gov.b, E-mail: marcelino@inb.go.b, E-mail: anasilva@inb.gov.b, E-mail: ogarcia@inb.gov.b [Industrias Nucleares do Brasil (UTM/INB), Pocos de Caldas, MG (Brazil). Unidade de Tratamento de Minerio

    2011-10-26

    The ore treatment unit (OTU) of Industrias Nucleares do Brasil (INB), located at Caldas municipality - Minas Gerais, Brazil, posses a radioactive deposit, coming mainly from the chemical processing of monazite sands for obtention of 'rare earths'. The main components of these waste are the 'torta II (thorium rich residues) and the 'mesothorium' ({sup 228}Ra rich residues) - conditioned in steel drums (200 liters), plastic pumps (100 liters) or underground silos. These loaders are deposited in waste loading warehouses existent at the OTU and periodic evaluations of the external exposure rates (mR/h) are part of the 'Programa de Monitoracao Radiologica Ocupacional' of the unit. This paper presents a brief history of origins of this waste deposit and the material found there, and also the result of a routine monitoring of the external exposure rates

  10. An evaluation of the potential impacts of the 'gas aid'; Uma avaliacao dos impactos potenciais do 'auxilio gas'

    Energy Technology Data Exchange (ETDEWEB)

    Biazotto, Ana Lidia; Anuatti Neto, Francisco [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Economia, Administracao e Contabilidade

    2004-07-01

    In May of 2001, the prices to the final consumer of GLP were set free in the whole country; this procedure had the intention, to continue process of deregulation in the fuel sector, in accord with the Oil Law. The release of the prices of sale and shipping subsidies elimination, along with the elimination of the crossed subsidy, required the adoption of a 'gas aid' social program, aimed to guarantee the low profit families necessities attendance that would pay the additional fuel costs. The objective of this paper is to evaluate the gas aid program as its covering level and the economic and distributive efficiency. The study encloses the metropolitans regions investigated in the IBGE Family Budget Research of 1996. With base in the previously identification of the potential beneficiary of the program, and with them consumption profile, it was possible to evaluate the potential impact of the withdrawal of the subsidy in the hypothesis of the family be or not beneficiary of the program. Assuming that the targeting is perfect, it is compared the transference politics to the low profit families in relation to the previous politics of subsidize crossed. (author)

  11. Dosimetric evaluation in panoramic and tele-radiography procedures; Avaliacao dosimetrica em procedimentos de radiografia panoramica e teleradiografias

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Georgge Gomes

    2004-07-01

    The present work had as an objective to evaluate the skin surface entrance dose in panoramic and tele radiography procedures in three clinics in Recife - Pernambuco - Brazil, and to contribute with data for the determination of reference levels for super cited extra oral procedures, for this purpose, operational conditions in 3 clinics were evaluated in Recife, aiming to evaluate the existence and integrity of the radioprotection equipment, manner and conditions of image processing; and radiographic equipment parameters such as the dimension of the irradiation filed, the total filtration, the exposure time and the potential applied to the X ray tube. For an estimation of the skin entrance dose of the patient, the phantom Randon Alderson and thermoluminescence dosemeters were used. From these values and the conversion factors determined by the Monte Carlo technique, with the phantom MAX it was possible to estimate the dose absorbed in the organ due to the tele radiography procedures. Regarding panoramic radiography the study showed that the more elevated doses occurred in the parotid gland region which is near rotational venters. In the case of tele radiography the highest dose value occurred in the regions corresponding to the temporal lobe of the brain, followed by linfonodes, ears and parotid glands. The doses absorbed in the eyes and the thyroid gland were, 0.037 mGy and 0.002 mGy in Clinic A and 0.062 mGy and 0.003 mGy in Clinic C, respectively. Regarding equipment test, inadequacy was found in the beam collimation in Clinic A and in the reproducibility of the X ray exposure in Clinic C. The total filtration in both clinics was inadequate.(author)

  12. Comparative evaluation of online oil and gas monitor; Avaliacao de monitores de teor de oleo e graxa em linha

    Energy Technology Data Exchange (ETDEWEB)

    Louvisse, Ana Maria Travalloni; Pereira Junior, Oswaldo de Aquino; Jesus, Rafael Ferreira de; Santos, Lino Antonio Duarte dos; Lopes, Humberto Eustaquio [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    Petroleum is predominantly recovered in form of water in oil emulsions, which are stabilised by petroleum resins and asphaltenes, the colloidal disperse components of crude oil. The water phase, separated during the production process, consists of a dilute oil in water emulsion, commonly called produced water.There are a wide variety of methods for determination of oil in produced water that are commercially based on a number of technique. On line continuously monitoring shall be particularly useful in providing information to assist in optimising the separation process and also to attend the environmental legislation for discharge the produced water. There are a wide variety of on line oil in water monitors that are commercially available based on a number of technique. In this paper, a comparative evaluation was made between some methods of on line oil in water detecting. These are light scattering and ultraviolet fluorescence technique. A brief description of the optical methods will be discussed and some of associated problems and limitation are pointed. The work was done in a specific experimental set up that allows the simultaneous pumping of crude oil and water through a calibrated restriction in a pipe has been used. A permanent pressure drop induced by the restriction leads to the dispersion of the oil droplets in the water phase. The monitors based on light scattering technique tested show good agreement between monitor reading and the oil dispersion used. Otherwise for ultraviolet fluorescence based monitors show a significant effect of the variation of oil type. (author)

  13. Evaluation of integrity of radiation sources of nuclear gauges; Avaliacao da integridade de fontes radioativas de medidores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Torohate, Wiclif Francisco

    2016-11-01

    Nuclear equipment meters are mainly used in the industry in quality control and process control. The principle of operation consists in a shielded radioactive source together with a radiation detector such that the radiation interacts with the material to be analyzed before reaching the detector, providing real time data. Can be as their fixed and mobile mobility, the unique properties of ionizing radiation are used in three basic modes, transmission, backscatter or dispersion or induced (reactive). With the advancement and technological modernization in the world, the demand for nuclear gauges becomes increasingly larger. Currently in Brazil there are about 465 process control plants and 21 portable systems and Mozambique about 45 facilities using nuclear gauges. This font registration is done through a process called source inventory that allows also to know the category of the source, the danger or risk to human health that the source offers. The handling of this equipment requires personnel, certified, skilled and well trained in radiation protection area in accordance with the requirements of the various CNEN Rules. Due to the presence of radioactive source and because these devices are used by workers risk because there external radiation. In this context, we made the smear test in two fixed meters from the IRD industry laboratory, which determines the integrity of the source package, mandatory item in periodic integrity testing of the radiation source of this type of device. A set of procedures is made for its implementation as an evaluation of the radiological risk by radiological survey. It was intended to contribute to the learning handling and safe use of these meters. (author)

  14. Evaluation of O{sub 3}UV e H{sub 2}O{sub 2}/UV processes combined with biological activated carbon for reuse refinery waste water; Avaliacao dos processos O{sub 3}UV e H{sub 2}O{sub 2}/UV combinados com carvao ativado granulado com biofilme para reuso de efluentes de refinaria

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Bianca Miguel de; Dezotti, Marcia [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil); Cerqueira, Ana Claudia Figueiras Pereira de [Petroleo Brasileiro S.A. (CENPES/PETROBRAS), Rio de Janeiro, RJ (Brazil). Centro de Pesquisas e Desenvolvimento

    2012-07-01

    The treatment of refinery wastewater by advanced oxidation processes (AOP) coupled with biological activated carbon (BAC) was investigated aiming to generate water for reuse. The Gabriel Passos Refinery wastewater was previously treated in a membrane bioreactor, but still presented a high TOC content (30 mg/L) which may cause biofouling in the subsequent process of reverse osmosis. O3/UV and H2O2/UV processes were employed to oxidize the organic matter and BAC process to remove the residual organic matter from the AOP effluent. AOP promoted oxidation of recalcitrant organic matter as observed by drops on the treated wastewater absorbance and TOC values. BAC filters reached a TOC removal of 65% after 84 days of operation, while GAC filters were saturated after 28 days. Inoculated sand filters were also tested at different flow rates to compare with BAC filters. Low TOC values were achieved by the combined treatment, reaching values around 5 mg/L and allowing water reuse. BAC filters showed to be quite efficient for removal of organic compounds found in biologically treated oil refinery wastewater. (author)

  15. Evaluation of the effects of gamma radiation on the quality of pineapple (Ananas comosus (L.) Meer) cv. Smooth Cayenne minimally processed, storaged on differents temperatures and packages;Avaliacao dos efeitos da radiacao gama na qualidade de abacaxi (Ananas comosus (L.) Meer) cv. Smooth Cayenne minimamente processado, armazenado em diferentes temperaturas e embalagens

    Energy Technology Data Exchange (ETDEWEB)

    Leite, Daniela Terenzi Stuchi

    2006-07-01

    The present work aimed to verify the effects of gamma radiation (doses until 2 kGy), types of packages and temperatures of storage (5, 8 e 12 deg C) on the physicochemical characteristics, on the microbiological contamination and on the sensorial characteristics of pineapple 'Smooth Cayenne' minimally processed. The fruits were selected, washed; peeled and cutted transverse and the slices cutted were cutted on two or for pieces. The pieces were immersed in chlorinated water (100 mg/L) for 3 minutes, flowing and package, irradiated and stored. According with the results obtained in thi present work it was concluded that bigger the temperature of storage more quickly were the browning of the fruits. The loss of fresh weight of pineapple was bigger in the packages of polystyrene comparing with PET package when both are covered with PVC film and smaller in the PET packages covered with the same material. Doses of gamma radiation until 2 kGy did not change the physico-chemical and sensorial characteristics of pineapple 'Smooth Cayenne' minimally processed. The microbiological growth on the pieces of the processed fruit was smaller on the biggest dose. All the samples were is in good conditions for the human consume. (author)

  16. Lung scintigraphy evaluation in workers exposed to abrasive dusts; Avaliacao cintilografica pulmonar em trabalhadores de industria de abrasivos

    Energy Technology Data Exchange (ETDEWEB)

    Terra Filho, Mario

    1996-12-31

    The production process of abrasives use aluminium, or silicon carbide a synthetic material with a hardness only slightly less than that of a diamond. It is popularly known as carborundum since it was first manufactured as an abrasive in 1891, produced by the fusion of high grade silica and petroleum coke with sawdust. For many years silicon carbide was thought not to give rise to pulmonary lesions. Recently several researchers suggested the existence of a carborundum pneumoconiosis. The aim of this study was to evaluate the role of the pulmonary clearance of {sup 99m} Technetium chelated to diethylene-triamine penta-acetate ({sup 99m} Tc DTPA), and {sup 67} Gallium lung scanning in workers exposed to abrasive dusts. Thirty seven subjects, 13 smokers and 24 nonsmokers and ex smokers were studied. In 32 (86,48%) {sup 67} Gallium lung scanning was positive including 13 (40,62%) retired workers. We conclude that non smoking workers of abrasives plants have a pulmonary alveolar epithelial permeability disturbance similar as observed in smoking workers and smoking controls. Most workers, ex-workers of these industries and in patients with carborundum pneumoconiosis there is an evidence of pulmonary inflammation measured with abnormal {sup 67} Gallium lung scan. (author) 101 refs., 2 figs., 11 tabs.

  17. Lung scintigraphy evaluation in workers exposed to abrasive dusts; Avaliacao cintilografica pulmonar em trabalhadores de industria de abrasivos

    Energy Technology Data Exchange (ETDEWEB)

    Terra Filho, Mario

    1995-12-31

    The production process of abrasives use aluminium, or silicon carbide a synthetic material with a hardness only slightly less than that of a diamond. It is popularly known as carborundum since it was first manufactured as an abrasive in 1891, produced by the fusion of high grade silica and petroleum coke with sawdust. For many years silicon carbide was thought not to give rise to pulmonary lesions. Recently several researchers suggested the existence of a carborundum pneumoconiosis. The aim of this study was to evaluate the role of the pulmonary clearance of {sup 99m} Technetium chelated to diethylene-triamine penta-acetate ({sup 99m} Tc DTPA), and {sup 67} Gallium lung scanning in workers exposed to abrasive dusts. Thirty seven subjects, 13 smokers and 24 nonsmokers and ex smokers were studied. In 32 (86,48%) {sup 67} Gallium lung scanning was positive including 13 (40,62%) retired workers. We conclude that non smoking workers of abrasives plants have a pulmonary alveolar epithelial permeability disturbance similar as observed in smoking workers and smoking controls. Most workers, ex-workers of these industries and in patients with carborundum pneumoconiosis there is an evidence of pulmonary inflammation measured with abnormal {sup 67} Gallium lung scan. (author) 101 refs., 2 figs., 11 tabs.

  18. Microbiological, physicochemical and sensory evaluation of cabbage and carrot minimally processed salad after radiation treatment intended to immunocompromised patients or with special diets; Avaliacao microbiologica, fisico-quimica e sensorial de salada de repolho com cenoura minimamente processada apos o tratamento por radiacao gama destinado a pacientes imunocomprometidos ou com dietas especiais

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Thaise Cristine Fernandes

    2015-09-01

    During and after the treatment of cancer, people with HIV or transplants, the food intake can offer a well-being to the patient, because the action of eating right helps people to feel strong. Healthy people have their immune system working properly and can tolerate small amounts of bacteria. However, immunocompromised persons may not be able to and however immunocompromised people cannot fight this small amount of microorganisms and require a diet with very low microbiological count to avoid contact with potentially harmful bacteria. This is called neutropenic diet. These patients are susceptible to food contamination, so that it's not advisable the ingestion of raw products. The vegetable irradiation with low doses has the purpose of reducing the microbial load. The aim of this study was to obtain data on microbiological, sensorial e physicochemical aspects in minimally processed 'Primavera' salad irradiated with different doses of gamma radiation designed to immunocompromised patients. It were used doses of 1.0kGy, 2.0kGy, 3.0kGy and 4.0kGy irradiated in the Multipurpose Irradiator {sup 60}Co located in Radiation Technology Center. Microbiological analyzes were performed (n=25) using Petrifilm, sensory analysis using the sensory acceptance test (n=30) and triangular (n=15) and texture analysis (n=90) in the Food Microbiology Laboratory located at the Radiation Technology Center. The texture analysis was performed with the aid of a texturometer equipped with 5 kg load cell using a triangular cutting Warner-Bratzler Knife blade probe with the descent speed of 2mm/sec. All results were expressed in Newtons (N). The results showed that for microbiological analyzes the standards were followed according to the RDC 12/01 ANVISA. For the sensory test of acceptation no difference was found among the samples, however in the triangular test could be found slight differences between samples irradiated with 4.0kGy and control and there was significant

  19. Evaluation of the agricultural tractor using biofuel and diesel oil; Avaliacao de um trator agricola utilizando biocombustivel e oleo diesel

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Reny Adilmar Prestes; Pinheiro Neto, Raimundo; Meyer, Wagner; Mendonca, Elton Costa de; Roberti, Marcelo [Universidade Estadual de Maringa (UEM), PR (Brazil)], Emails: raplopes@uem.br, rpneto@uem.br

    2009-07-01

    Test with alternative fuels is essential to evaluate the performance of machines and engines. In this paper, the performance of a tractor in chiseling operation was evaluated using oil diesel and biofuel (oil diesel + soybean vegetable oil mixture). Speed of displacement, slip wheels, force traction bar and fuel consumption was evaluated in areas under tillage and no-tillage. The speed of displacement of the set presented similar behavior in tillage and no-tillage. Bigger values mean force in the bar of traction, slip and fuel consumptions had been observed for no-tillage with the tractor operating with diesel. Bigger values mean consumption the biofuel had been observed in areas under tillage. The coverings of the soil had influenced in the values of force bar traction, slip wheels, speed of displacement and fuel consumption. In the studied conditions, the tests demonstrate that the mixture oil diesel + soybean vegetable oil had not influenced in the performance of the tractor. (author)

  20. Evaluation of a quality control program in radiodiagnosis; Radiologia diagnostica e programa de garantia de qualidade: avaliacao critica

    Energy Technology Data Exchange (ETDEWEB)

    Yacovenco, Alejandro; Infantosi, A.F.C. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Biomedica; Lira, S.H. [Hospital Central da Policia Militar do Estado do Rio de Janeiro, RJ (Brazil); Tauhata, L. [Instituto de Radioprotecao e Dosimetria (IRD), Rio de Janeiro, RJ (Brazil). Supervisao de Metrologia das Radiacoes Ionizantes

    1996-12-31

    A quality assurance program, implemented at the Radiologic Service of the Hospital of the Military Police in Rio de Janeiro, Brazil, is evaluated. The results show a reduction around of 70% in the number of rejected films and 75% in the costs. A return to the former conditions is reported as after the discontinuation of the program 2 refs., 2 figs.

  1. Evaluation of the absorbed dose in odontological computerized tomography; Avaliacao da dose absorvida em tomografia computadorizada odontologica

    Energy Technology Data Exchange (ETDEWEB)

    Legnani, Adriano; Schelin, Hugo R.; Rocha, Anna Silvia P.S. da, E-mail: schelin@utfpr.edu.b, E-mail: anna@utfpr.edu.b [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Khoury, Helen J., E-mail: khoury@ufpe.b [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil)

    2011-10-26

    This paper evaluated the absorbed dose at the surface entry known as 'cone beam computed tomography' (CBCT) in odontological computerized tomography. Examination were simulated with CBCT for measurements of dose. A phantom were filled with water, becoming scatter object of radiation. Thermoluminescent dosemeters were positioned on points correspondent to eyes and salivary glands

  2. Evaluation of the absorbed dose in odontological computerized tomography; Avaliacao da dose absorvida em tomografia computadorizada odontologica

    Energy Technology Data Exchange (ETDEWEB)

    Legnani, Adriano; Schelin, Hugo R; Rocha, Anna Silvia P.S. da, E-mail: schelin@utfpr.edu.b, E-mail: anna@utfpr.edu.b [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Khoury, Helen J., E-mail: khoury@ufpe.b [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil)

    2011-10-26

    This paper evaluated the absorbed dose at the surface entry known as 'cone beam computed tomography' (CBCT) in odontological computerized tomography. Examination were simulated with CBCT for measurements of dose. A phantom were filled with water, becoming scatter object of radiation. Thermoluminescent dosemeters were positioned on points correspondent to eyes and salivary glands

  3. Evaluation of the dispersion of oil refinery liquid effluent; Avaliacao da dispersao de efluente liquido de refinaria de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Mariano, Adriano Pinto; Silva, Ariovaldo Jose da; Oliveira, Valdenilson Jose Alves de; Angelis, Dejanira de Franceschi de [Universidade Estadual Paulista (UNESP), Rio Claro, SP (Brazil). Dept. de Bioquimica e Microbiologia. Inst. de Biociencias], e-mail: adrianomariano@yahoo.com.br

    2010-07-15

    In this paper, two techniques to evaluate the dispersion of the effluent of an oil refinery are presented. Thus, the dispersion plume was characterized by field measurements of electrical conductivity and by computational simulation (Cormix simulator). An oil refinery whose effluent is discharged on the Atibaia river (Paulinia/SP) is taken as study case. The behavior of the effluent was evaluated until 1000 m after the discharge. The results show that the measurement of electrical conductivity is a suitable technique to evaluate the dispersion of oil refinery wastewaters, since they have high conductivity and for this reason there is a strong contrast between the values of the wastewater and the ambient background. Furthermore, other water quality parameters had a dispersion behavior similar to that shown by the conductivity. The dispersion plume generated by the computational simulator showed high concordance with the field data. In this manner, computational simulation can be a useful tool to evaluate the dispersion of discharges considering hypothetical scenarios, as well as to design the discharge channel. (author)

  4. Evaluation of essential minerals in pumpkin seeds by EDXRF; Avaliacao de minerais essenciais em sementes de abobora moranga por EDXRF

    Energy Technology Data Exchange (ETDEWEB)

    Boaro, Flavia Araujo; Zacari, Cristiane Z. [Faculdades Metropolitanas Unidas (FMU), Sao Paulo, SP (Brazil); Scapin, Marcos A.; Aquino, Reginaldo R. [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Sao Paulo, SP(Brazil)

    2013-07-01

    Pumpkin seeds, marketed in the Municipal Market of Sao Paulo, Brazil, were analyzed using the Energy Dispersive of X-ray Fluorescence technique (EDXRF) seeking to evaluate the content of the main essential minerals present in these seeds, and their contribution to human nutrition.

  5. Probabilistic model for primary distribution networks performance evaluation; Modelo probabilistico para avaliacao do desempenho de redes de distribuicao primaria

    Energy Technology Data Exchange (ETDEWEB)

    Valente, Andre Luiz de Carvalho

    1997-07-01

    A method for performance evaluation of primary feeders with respect to voltage drop, loss and level of reliability to use, specially in studies of investment planning is focused. The probabilistic model is the chronological minimum length tree. The work consists of: analysis of model; proposition of modifications in model necessary to brazilian electrical sector reality, introducing parameter representing the load density; model adaptation to reliability studies, with evaluation of principal indicators in use in the country; development of software for microcomputer; the simulation of some cases with the software; based in the results, attainment of laws to facilitate the use of model. Eventually, the conclusions are made with considerations about possible applications of the method and research topics for further developments are settled. (author)

  6. Evaluation of the numerical solution of polymer flooding; Avaliacao da solucao numerica da injecao de polimeros em reservatorios de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira, Vinicius Ligiero; Pires, Adolfo Puime; Bedrikovetsky, Pavel G. [Universidade Estadual do Norte Fluminense (UENF), Macae, RJ (Brazil). Lab. de Engenharia e Exploracao do Petroleo (LENEP)

    2004-07-01

    Enhanced Oil Recovery (EOR) methods include injection of different fluids into reservoirs to improve oil displacement. The EOR methods may be classified into the following kinds: injection of chemical solutions, injection of solvents and thermal methods. The chemical fluids most commonly injected are polymers, surfactants, micellar solutions, etc. Displacement of oil by any of these fluids involves complex physico-chemical processes of interphase mass transfer, phase transitions and transport properties changes. These processes can be divided into two main categories: thermodynamical and hydrodynamical ones. They occur simultaneously during the displacement, and are coupled in the modern mathematical models of EOR. The model for one-dimensional displacement of oil by polymer solutions is analyzed in this paper. The Courant number is fixed, and we compare the results of different runs of a numerical simulator with the analytical solution of this problem. Each run corresponds to a different spatial discretization. (author)

  7. Evaluation of level of impregnation monomers in hydrotalcite; Avaliacao do grau de impregnacao de monomeros em hidrotalcita

    Energy Technology Data Exchange (ETDEWEB)

    Carmo, Danieli M. do, E-mail: danielimcarmo@hotmail.com [Instituto de Macromoleculas Professora Eloisa Mano - IMA, Universidade Federal do Rio de Janeiro - UFRJ, RJ (Brazil); Machado, Jacson S.C.; Oliveira, Marcelo F.L.; Oliveira, Marcia G. [Instituto Nacional de Tecnologia - INT, Rio de Janeiro, RJ (Brazil); Soares, Bluma G. [Instituto de Macromoleculas Professora Eloisa Mano - IMA, Universidade Federal do Rio de Janeiro - UFRJ, RJ (Brazil)

    2011-07-01

    To evaluate the impregnation degree of 1,6-hexamethylene diisocyanate and 1,4-butanediol monomers in hydrotalcite clays it was prepared dispersions with mixing ratio 1:100 (clay/monomer), using the Ultraturrax and Ultrasound. Subsequently the samples were characterized by Fourier Transform Infrared Spectroscopy and X-ray Diffraction. Swelling tests and Tyndall effect were used to illustrate the different dispersions. The results indicated a strong interaction between the hydrotalcite with 1,6-hexamethylene diisocyanate, favoring the formation of intercalated structures. (author)

  8. Tetra-combined cogeneration system. Exergy and thermo economic evaluation; Sistema tetra combinado de cogeracao. Avaliacao exergetica e termoeconomica

    Energy Technology Data Exchange (ETDEWEB)

    Arriola, Domingo Wilson Garagatti [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Dept. de Engenharia Mecanica]. E-mail: wgarriol@usp.br; Oliveira Junior, Silvio de [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil)]. E-mail: olivsilj@ipt.br

    2000-07-01

    This paper presents the description and the exergy and thermo economic evaluation of a new cogeneration system, called tetra-combined cogeneration system, that generates electricity and chilled water (for air conditioning purposes) and eventually steam. This system is composed of a gas turbine, a heat recovery steam generator, a condensation/extraction steam turbine and a hybrid absorption/steam ejection chiller. The exergy and thermo economic performance (exergy based costs of electricity, steam and chilled water production) of this system is compared with the performances of conventional cogeneration systems, pointing out the advantages and disadvantages of this new system. (author)

  9. Tetra-combined cogeneration system. Exergy and thermoeconomic evaluation; Sistema tetra combinado de cogeracao. Avaliacao exergetica e termoeconomica

    Energy Technology Data Exchange (ETDEWEB)

    Arriola, Domingo Wilson Garagatti [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Dept. de Engenharia Mecanica]. E-mail: wgarriol@usp.br; Oliveira Junior, Silvio de [Instituto de Pesquisas Tecnologicas (IPT), Sao Paulo, SP (Brazil)]. E-mail: olivsilj@ipt.br

    2000-07-01

    The description and the exergy and thermo economic evaluation of a new cogeneration system, called tetra-combined cogeneration system, that generates electricity and chilled water (for air conditioning purposes) and eventually steam is presented. This system is composed of a gas turbine, a heat recovery steam generator, a condensation/extraction steam turbine and a hybrid absorption/steam ejection chiller.The exergy and thermo economic performance (exergy based costs of electricity, steam and chilled water production) of this system is compared with the performances of conventional cogeneration systems, pointing out the advantages and disadvantages of this new system. (author)

  10. Polyamide 6/nickel ferrite composites: morphological and structural evaluation; Compositos poliamida 6 /ferrita de niquel: avaliacao morfologica e estrutural

    Energy Technology Data Exchange (ETDEWEB)

    Menezes, P.C.F.; Santos, P.T.A.; Wanderley, A.S.D.; Costa, A.C.F.M.; Araujo, E.M., E-mail: patricia.fernandes24@hotmail.com [Universidade Federal de Campina Grande (UFCG), Campina Grande, PB (Brazil). Unidade Academica de Engenharia de Materiais

    2011-07-01

    This study aims to evaluate the influence of particle size of the load on the structure and morphology of polyamide composite 6/ferrita nickel. To obtain the composite, the polyamide 6 was previously vacuum dried at 80 ° C/48h to eliminate moisture, and then the load was incorporated as powders and as synthesized after calcination at 900°C in the mass concentration of 50%. Subsequently, the mixture was compressed using three tons to obtain the composites, which were characterized by XRD and SEM. XRD results showed the characteristic peaks of polyamide 6 and ferrite. An increase in crystallinity was observed for the composite loaded calcined at 900° C. SEM results showed a good dispersion of nickel ferrite loading in the matrix, the presence of larger clusters and evenly distributed load for the composite calcined at 900 ° C. (author)

  11. Dose evaluation in special fluoroscopy procedures: Hysterosalpingography and Dacryocystography; Avaliacao de dose em procedimentos especiais de fluoroscopia: histerossalpingografia e dacriocistografia

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Cintya Carolina Barbosa

    2006-04-15

    The hysterosalpingography (HSG) and dacryocystography (DCG) are among the special fluoroscopy procedures. The HSG is a radiodiagnostic technique used to detect uterine and tubal pathologies and it is fundamental for the investigation of infertility. The DCG is a form of lacrimal system imaging, being important to show the level of obstruction, the presence of dilatation of the lacrimal sac, as well as alterations in nearby structures. At this research, the study of skin entrance dose was evaluated for these two special fluoroscopy procedures, besides the analyses of staff doses whose performs the exams. The exams of 22 HSG patients and 8 DCG patients were evaluated using TL-100 dosimeters attached on patient' skin at anatomical landmarks evolved on each exam. In the case of HSG, the results showed that skin entrance doses varied from 0.5 mGy to 73.4 mGy, with an average value of 22.1 mGy. The estimated uterus dose was 5.5 mGy, and 6.6 mGy was the average dose estimated to the ovaries. The patient' skin entrance dose undergoing to DCG examinations varied from 2.1 mGy to 10.6 mGy, and the average eye's dose was 6.1 mGy. The results of staff dose showed that, on HSG, the average dose on doctor's right hand was 4.3 mGy per examination. This value had to the fact that the physician introduces the contrast manually while all contrast exposures. In relation of DCG, the staff's dose values were nearby background radiation, evidencing that, inside of permitted limits, there is no risk for the physicians at this procedure. (author)

  12. Dose evaluation in special fluoroscopy procedures: Hysterosalpingography and Dacryocystography; Avaliacao de dose em procedimentos especiais de fluoroscopia: histerossalpingografia e dacriocistografia

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Cintya Carolina Barbosa

    2006-04-15

    The hysterosalpingography (HSG) and dacryocystography (DCG) are among the special fluoroscopy procedures. The HSG is a radiodiagnostic technique used to detect uterine and tubal pathologies and it is fundamental for the investigation of infertility. The DCG is a form of lacrimal system imaging, being important to show the level of obstruction, the presence of dilatation of the lacrimal sac, as well as alterations in nearby structures. At this research, the study of skin entrance dose was evaluated for these two special fluoroscopy procedures, besides the analyses of staff doses whose performs the exams. The exams of 22 HSG patients and 8 DCG patients were evaluated using TL-100 dosimeters attached on patient' skin at anatomical landmarks evolved on each exam. In the case of HSG, the results showed that skin entrance doses varied from 0.5 mGy to 73.4 mGy, with an average value of 22.1 mGy. The estimated uterus dose was 5.5 mGy, and 6.6 mGy was the average dose estimated to the ovaries. The patient' skin entrance dose undergoing to DCG examinations varied from 2.1 mGy to 10.6 mGy, and the average eye's dose was 6.1 mGy. The results of staff dose showed that, on HSG, the average dose on doctor's right hand was 4.3 mGy per examination. This value had to the fact that the physician introduces the contrast manually while all contrast exposures. In relation of DCG, the staff's dose values were nearby background radiation, evidencing that, inside of permitted limits, there is no risk for the physicians at this procedure. (author)

  13. Decision theory on the quality evaluation of medical images; A teoria da decisao na avaliacao da qualidade da imagem medica

    Energy Technology Data Exchange (ETDEWEB)

    Lessa, Patricia Silva

    2001-10-01

    The problem of quality has been a constant issue in every organization.One is always seeking to produce more, to do it at a lower cost, and to do it with better quality. However, in this country, there is no radiographic film quality control system for radiographic services. The tittle that actually gets done is essentially ad hoc and superficial. The implications of this gap, along with some other shortcomings that exist in process as a whole (the state of the x-ray equipment, the adequate to use in order to obtain a radiography, the quality of the film, the processing of the film, the brightness and homogeneity of the viewing boxes, the ability of the radiologist), have a very negative impact on the quality of the medical image, and, as result, to the quality of the medical diagnosis and therapy. It frequently happens that many radiographs have to be repeated, which leads to an increase of the patient's exposure to radiation, as well as of the cost of the procedure for the patient. Low quality radiographs that are not repeated greatly increase the probability of a wrong diagnosis, and consequently, of inadequate therapeutical procedures, thus producing increased incidence of bad outcomes and higher costs. The paradigm proposed in order to establish a system for the measurement of the image's quality is Decision Theory. The problem of the assessment of the image is studied by proposing a Decision Theory approach. The review of the literature reveals a great concern with the quality of the image, along with an absence of an adequate paradigm and several essentially empirical procedures. Image parameters are developed in order to formalize the problem in terms of Decision Theory, and various aspects of image digitalisation are exposed. Finally, a solution is presented, including a protocol for quality control. (author)

  14. Gas geochemistry: a new technology to evaluate petroleum systems; Geoquimica de gases: uma nova tecnologia em avaliacao de sistemas petroliferos

    Energy Technology Data Exchange (ETDEWEB)

    Santos Neto, Eugenio Vaz dos [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas. Gerencia de Geoquimica]. E-mail: eugenioneto@petrobras.com.br

    2004-11-01

    In the last decade hydrocarbon gas geochemistry has significantly evolved especially regarding to the widespread use of GC-C-IRMS (Gas chromatography-combustion-ion ratio monitoring system) techniques that allowed accurate measurements of {delta}{sup 13} C in the C{sub 1}-C{sub 4} fraction. Also, due to the improvement of the sampling procedures, sample collection - relatively small amounts of gas samples at low pressure - has become easier, sample transportation has become safer - the risk of accidents has been reduced - and analysis has become faster. The 'state-of-the-art' of the use of gas geochemistry to study processes within petroleum systems is discussed in this paper. The discussion is mainly focused on the identification of the hydrocarbon gas origin (biogenesis versus thermo genesis, mixing) and hydrocarbon gas generation (primary versus secondary cracking), including the inference of the relative thermal evolution and possible secondary alterations caused by biodegradation, secondary migration and eventually leakage from petroleum accumulations. Brief comments were also made about the new technologies involving noble gases and their potential use as tracers of processes in petroleum systems. Additionally, the origin of non-hydrocarbon gases in petroleum accumulations is succinctly discussed, as well as their possible economic impacts. The use of gas geochemistry techniques has brought a significant improvement in the understanding of petroleum systems under exploration in Brazil and in other parts of the world. Besides, on-going research projects suggest that there is a great potential for technological advances, e.g., adding the hydrogen isotopic composition of hydrocarbons to the interpretations, and also integrating the available results to the isotopic variations of noble gases. (author)

  15. Evaluation of conformal radiotherapy techniques through physics and biologic criteria; Avaliacao de tecnicas radioterapicas conformacionais utilizando criterios fisicos e biologicos

    Energy Technology Data Exchange (ETDEWEB)

    Bloch, Jonatas Carrero

    2012-07-01

    In the fight against cancer, different irradiation techniques have been developed based on technological advances and aiming to optimize the elimination of tumor cells with the lowest damage to healthy tissues. The radiotherapy planning goal is to establish irradiation technical parameters in order to achieve the prescribed dose distribution over the treatment volumes. While dose prescription is based on radiosensitivity of the irradiated tissues, the physical calculations on treatment planning take into account dosimetric parameters related to the radiation beam and the physical characteristics of the irradiated tissues. To incorporate tissue's radiosensitivity into radiotherapy planning calculations can help particularize treatments and establish criteria to compare and elect radiation techniques, contributing to the tumor control and the success of the treatment. Accordingly, biological models of cellular response to radiation have to be well established. This work aimed to study the applicability of using biological models in radiotherapy planning calculations to aid evaluating radiotherapy techniques. Tumor control probability (TCP) was studied for two formulations of the linear-quadratic model, with and without repopulation, as a function of planning parameters, as dose per fraction, and of radiobiological parameters, as the α/β ratio. Besides, the usage of biological criteria to compare radiotherapy techniques was tested using a prostate planning simulated with Monte Carlo code PENELOPE. Afterwards, prostate planning for five patients from the Hospital das Clinicas da Faculdade de Medicina de Ribeirao Preto, USP, using three different techniques were compared using the tumor control probability. In that order, dose matrices from the XiO treatment planning system were converted to TCP distributions and TCP-volume histograms. The studies performed allow the conclusions that radiobiological parameters can significantly influence tumor control

  16. Evaluation for turbine implementation for a micro hydroelectric power plant; Avaliacao para implantacao de uma turbina para uma microcentral hidreletrica

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Gilberto Manoel; Halmeman, Maria Cristina Rodrigues; Oliveira, Franciene Gois [Universidade Estadual Paulista (UNESP), Botucatu, SP (Brazil). Programa de Pos-graduacao em Energia na Agricultura; Seraphim, Odivaldo Jose [Universidade Estadual Paulista (UNESP), Botucatu, SP (Brazil). Dep. de Engenharia Rural

    2008-07-01

    In this work it was analyzed the viability technical and economical of turbines to micro hydroelectric headquarters as an alternative to consumers not served by electric energy in isolated areas. It was used a experimental methods to create an estimative and a evaluation of the hydroelectric potential, through hydrological criteria in the area and, thus, be able to note if there is viability for its use. Some kinds of turbines made by the national industry were verified, analyzing the technical and economical characteristics and in function of the hydro energetic-conditions of the area. The results shoed that a micro-headquarters serves the necessities and expectations of the owner at the electric energy supply. It was noted that the expenses are smaller comparing to the other expenses know in the literature, from national factories. Even though the limiting factor is the distance from the production to the consumer, the potency of 18.4 kw was enough to satisfy the local necessities. The installation of de micro headquarters will bring enhances and facilities by the fact that it represents a big social importance for the area. (author)

  17. Evaluation of new polymers for enhanced oil recovery; Avaliacao de novos polimeros para recuperacao aumentada de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Maia, Ana M.S.; Chagas, Emanuel F.; Costa, Marta; Garcia, Rosangela B. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2004-07-01

    The main polymers used nowadays for enhanced oil recovery, partially hydrolysed polyacrylamides and xanthan gum, show some limitations, such as low tolerance to salt presence and biological degradation. Therefore, it is necessary the improvement of the polymeric properties. With this goal, a new class of polymers, named 'water-soluble polymers hydrophobically modified' or simply 'amphiphilic polymers', has been developed. In this work, it was obtained a water-soluble acrylamide polymer hydrophobically modified with N,N-dihexyl acrylamide, using the micellar copolymerization technique. After the structural and rheological characterization of the copolymer, its performance in porous medium was evaluated through core flood tests in Botucatu sandstone. In the presence of sodium chloride, the amphiphilic copolymer presented a great increase of viscosity, besides values of resistance factor and of residual resistance factor higher than for the commercial polyacrylamide. This behavior can favor the oil recovery, mainly in high salinity and permeability reservoirs, by improving the water flooding sweep efficiency. (author)

  18. Evaluation of kerma rate in radioactive waste disposal; Avaliacao da taxa de kerma em deposito de rejeitos radioativos

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, Rodolfo O.; Silva, Joao C.P.; Santos, Joao R. dos, E-mail: oliveira@ien.gov.br, E-mail: jcarlos@ien.gov.br, E-mail: regis@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2014-07-01

    This study aims to assess the progression of kerma rate levels in the air due to the increase of collection, storing and storage of radioactive waste in the new building (after expansion) of the radioactive waste disposal (RWD) of the Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Brazil. This review is carried out every six months at IEN with thermoluminescent dosimeter lithium fluoride LiF: Mg, Cu, P (TLD-100H). Here are the average values of kerma rate for the period 2008- 2012. In this context, the methodology used for selection and choices of detectors used in dosimeters is presented. The detectors were chosen through homogeneity criteria of the pack, standardization factor and coefficient of variation (CV%). The monitoring points and the exposure time of the detectors are chosen considering various factors, including the rate of occupation and indoor and outdoor positions to RWD. These evaluations showed that the contribution of the new waste disposal in increasing kerma rate of IEN, has proved to be insignificant, that is, the presence of RWD does not contribute to increased environmental kerma rate in the region around this installation.

  19. Evaluation of radioiodinetherapy protocol for patients with Plummer disease; Avaliacao do protocolo da radioiodoterapia para pacientes com doenca de Plummer

    Energy Technology Data Exchange (ETDEWEB)

    Mendonca, Keyla Mary Cavalheiro; Antonio Filho, Joao; Brandao, Simone Cristina Soares, E-mail: keylamcm@yahoo.com.br, E-mail: jaf@ufpe.br, E-mail: simonecordis@yahoo.com.br [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil); Santos, Marcus Aurelio P. dos, E-mail: masantos@cnen.gov.br [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil)

    2014-07-01

    The disease Plummer (DP) is generated by the thyroid cells that function autonomously, independent the rest of the organ parenchyma. The DP presents a prevalence of 1% to 9%, higher in regions with iodine deficiency, affecting six women for every man. The study was conducted at the Department of Nuclear Medicine of Universidade Federal de Pernambuco (UFPE) from {sup 99m}Tc data capture and mass existing in the thyroid records of 54 patients with PD who underwent radioiodine therapy with fixed activities 1110 megabecquerels (MBq) from 2004 to 2008. For capitation of {sup 99m}Tc from a group of 22 patients were used 5 ml syringes, measured by a Capintec CRC-7 model activimeter, having scintigraphy after 20 minutes and results in a region of interest. Mass evaluation was based on method of palpation of the thyroid, considering the mass standard. It is observed that 68.2% of patients received more activity than needed, 31.8% were less active, and none received activity in accordance with your needs. There was a statistically significant difference (p <0.05) between the fixed activities and activities computed for all patients, according to Chi-square test for independence with 21 degrees of freedom. The cure rate of a group of 32 patients was 75% after one year of follow-up. It is suggested that the RIT is preceded by an assessment of the maximum percentage of uptake and thyroid mass.

  20. Pulmonary leukemic involvement: high-resolution computed tomography evaluation; Comprometimento pulmonar nas leucemias: avaliacao por tomografia computadorizada de alta resolucao

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Ana Paola de [Universidade Federal, Rio de Janeiro, RJ (Brazil). Faculdade de Medicina. Programa de Pos-graduacao em Radiologia; Marchiori, Edson [Universidade Federal Fluminense, Niteroi, RJ (Brazil). Dept. de Radiologia; Souza, Junior, Arthur Soares [Faculdade de Medicina de Sao Jose do Rio Preto (FAMERP), SP (Brazil). Dept. de Radiologia

    2004-12-01

    Objective: To evaluate the role of high-resolution computed tomography (HRCT) in patients with leukemia and pulmonary symptoms, to establish the main patterns and to correlate them with the etiology. Materials and Methods: This is a retrospective study of the HRCT of 15 patients with leukemia and pulmonary symptoms. The examinations were performed using a spatial high-resolution protocol and were analyzed by two independent radiologists. Results: The main HRCT patterns found were ground-glass opacity (n=11), consolidation (n=9), airspace nodules (n=3), septal thickening (n=3), tree-in-bud pattern (n=3), and pleural effusion (n=3). Pulmonary infection was the most common finding seen in 12 patients: bacterial pneumonia (n=6), fungal infection (n = 4), pulmonary tuberculosis (n=1) and viral infection (n=1). Leukemic pleural infiltration (n=1), lymphoma (n=1) and pulmonary hemorrhage (n=1) were detected in the other three patients. Conclusion: HRCT is an important tool that may suggest the cause of lung involvement, its extension and in some cases to guide invasive procedures in patients with leukemia. (author)

  1. Evaluation of harmonic distortions using small scale computers; Avaliacao de distorcoes harmonicas utilizando-se computadores de pequeno porte

    Energy Technology Data Exchange (ETDEWEB)

    Paschoareli, Junior, Dionizio

    1991-12-01

    The emergence more and more constant of non-linear loads in the power systems, with the consequent distortion in the voltage wave forms and of current, turns necessary complementary analyses in the planning of the systems, in way the if understands and to minimize the effects caused by the harmonic distortions. Among the methods used in this analysis are the computational programs that determine the flow of harmonic current and the voltages distorted in the buses. The objective of this work is the optimization of a program developed for large computers, turning possible its utilization in microcomputers. Besides, several models of components and two electric systems have its answers to the presence of multiple frequencies of the fundamental (harmonic frequency) evaluated and the results of the simulations will be presented. It also accomplishes simulations that make possible the visualization of the distortions in the voltage wave forms of the buses. Finally, the work offers a global and qualitative vision of this phenomenon that has been reason increasing preoccupation for mainly among the responsible for the quality of the supplied energy.

  2. Process evaluation distributed system

    Science.gov (United States)

    Moffatt, Christopher L. (Inventor)

    2006-01-01

    The distributed system includes a database server, an administration module, a process evaluation module, and a data display module. The administration module is in communication with the database server for providing observation criteria information to the database server. The process evaluation module is in communication with the database server for obtaining the observation criteria information from the database server and collecting process data based on the observation criteria information. The process evaluation module utilizes a personal digital assistant (PDA). A data display module in communication with the database server, including a website for viewing collected process data in a desired metrics form, the data display module also for providing desired editing and modification of the collected process data. The connectivity established by the database server to the administration module, the process evaluation module, and the data display module, minimizes the requirement for manual input of the collected process data.

  3. Comparison of the automated evaluation of phantom mama in digital and digitalized images; Comparacao da avaliacao automatizada do phantom mama em imagens digitais e digitalizadas

    Energy Technology Data Exchange (ETDEWEB)

    Santana, Priscila do Carmo, E-mail: pcs@cdtn.b [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Engenharia Nuclear. Programa de Pos-Graduacao em Ciencias e Tecnicas Nucleares; Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Fac. de Medicina. Dept. de Propedeutica Complementar; Gomes, Danielle Soares; Oliveira, Marcio Alves; Nogueira, Maria do Socorro, E-mail: mnogue@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2011-07-01

    Mammography is an essential tool for diagnosis and early detection of breast cancer if it is provided as a very good quality service. The process of evaluating the quality of radiographic images in general, and mammography in particular, can be much more accurate, practical and fast with the help of computer analysis tools. This work compare the automated methodology for the evaluation of scanned digital images the phantom mama. By applied the DIP method techniques was possible determine geometrical and radiometric images evaluated. The evaluated parameters include circular details of low contrast, contrast ratio, spatial resolution, tumor masses, optical density and background in Phantom Mama scanned and digitized images. The both results of images were evaluated. Through this comparison was possible to demonstrate that this automated methodology is presented as a promising alternative for the reduction or elimination of subjectivity in both types of images, but the Phantom Mama present insufficient parameters for spatial resolution evaluation. (author)

  4. Systematic approach for assessment of accident risks in chemical and nuclear processing; Abordagem sistematica para avaliacao de riscos de acidentes em instalacoes de processamento quimico e nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Senne, Junior, Murillo

    2003-07-15

    The industrial accidents which occurred in the last years, particularly in the 80's, contributed a significant way to draw the attention of the government, industry and the society as a whole to the mechanisms for preventing events that could affect people's safety and the environment quality. Techniques and methods extensively used the nuclear, aeronautic and war industries so far were adapted to performing analysis and evaluation of the risks associated to other industrial activities, especially in the petroleum, chemistry and petrochemical areas. The risk analysis in industrial facilities is carried out through the evaluation of the probability or frequency of the accidents and their consequences. However, no systematized methodology that could supply the tools for identifying possible accidents likely to take place in an installation is available in the literature. Neither existing are methodologies for the identification of the models for evaluation of the accidents' consequences nor for the selection of the available techniques for qualitative or quantitative analysis of the possibility of occurrence of the accident being focused. The objective of this work is to develop and implement a methodology for identification of the risks of accidents in chemical and nuclear processing facilities as well as for the evaluation of their consequences on persons. For the development of the methodology, the main possible accidents that could occur in such installations were identified and the qualitative and quantitative techniques available for the identification of the risks and for the evaluation of the consequences of each identified accidents were selected. The use of the methodology was illustrated by applying it in two case examples adapted from the literature, involving accidents with inflammable, explosives, and radioactive materials. The computer code MRA - Methodology for Risk Assessment was developed using DELPHI, version 5.0, with the purpose of systematizing

  5. Systematic approach for assessment of accident risks in chemical and nuclear processing; Abordagem sistematica para avaliacao de riscos de acidentes em instalacoes de processamento quimico e nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Senne Junior, Murillo

    2003-07-15

    The industrial accidents which occurred in the last years, particularly in the 80's, contributed a significant way to draw the attention of the government, industry and the society as a whole to the mechanisms for preventing events that could affect people's safety and the environment quality. Techniques and methods extensively used the nuclear, aeronautic and war industries so far were adapted to performing analysis and evaluation of the risks associated to other industrial activities, especially in the petroleum, chemistry and petrochemical areas. The risk analysis in industrial facilities is carried out through the evaluation of the probability or frequency of the accidents and their consequences. However, no systematized methodology that could supply the tools for identifying possible accidents likely to take place in an installation is available in the literature. Neither existing are methodologies for the identification of the models for evaluation of the accidents' consequences nor for the selection of the available techniques for qualitative or quantitative analysis of the possibility of occurrence of the accident being focused. The objective of this work is to develop and implement a methodology for identification of the risks of accidents in chemical and nuclear processing facilities as well as for the evaluation of their consequences on persons. For the development of the methodology, the main possible accidents that could occur in such installations were identified and the qualitative and quantitative techniques available for the identification of the risks and for the evaluation of the consequences of each identified accidents were selected. The use of the methodology was illustrated by applying it in two case examples adapted from the literature, involving accidents with inflammable, explosives, and radioactive materials. The computer code MRA - Methodology for Risk Assessment was developed using DELPHI, version 5.0, with the purpose of

  6. Importance of evaluation of uncertainties on the measurement of natural gas and petroleum volumes; Importancia da avaliacao das incertezas na medicao dos volumes de petroleo e gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Silva Filho, Jose Alberto Pinheiro da; Oliveira, Thiago Barra Vidal de; Mata, Josaphat Dias da [PETROBRAS, Rio de Janeiro, RJ (Brazil)], Emails: jose.pinheiro@petrobras.com.br, thiagovidal@petrobras.com.br, josaphat@petrobras.com.br; Val, Luiz Gustavo do [Instituto de Qualidade e Metrologia (IQM), Rio de Janeiro, RJ (Brazil)], E-mail: gdoval.iqm@petrobras.com.br

    2009-07-01

    The measurement is considered as the 'cash register' of the enterprises, increasing the accuracy and the exigence at each step when come close to the delivery points, where the 0.1 % of differences are discussed. The work presents the approach used in the evaluation of measurement uncertainties in the volumes obtained of petroleum and natural gas at the processes of production in Brazil, and in the international level as well.

  7. Evaluation of innovation processes

    Directory of Open Access Journals (Sweden)

    Jakub Tabas

    2012-01-01

    Full Text Available In present, innovations are spoken as an engine of the world economy because the innovations are transforming not only business entities but the whole industries. The innovations have become a necessity for business entities in order to survive on floating challenging markets. This way, innovations are driving force of companies’ performance. The problem which arises here is a question of measurement innovation’s effect on the financial performance of company or selection between two or more possible variants of innovation’s realization. Various authors which are focused on innovations processes are divided into two groups in their attitudes towards the question of influence of innovations on financial performance of companies. One group of the authors present the idea that any reliable measurement is not possible or efficient. The second group of authors present some methods theoretically applicable on this measurement but they base their approaches mostly on the methods of measurement of investments effectiveness or they suggest employment of indicators or ratios which wouldn’t be clearly connected with the outcome of innovation process. The aim of submitted article is to compare different approaches to evaluation of the innovation processes. The authors compare various approaches here and by use of analysis and synthesis, they determine their own method how to measure outcome of innovation process.

  8. Evaluation as a tool for planning: a case study on rural electrification; Avaliacao como instrumento de planejamento: estudo de caso em eletrificacao rural

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Marcio Giannini; Rodrigues, Alexia de Freitas; Paz, Luciana Rocha Leal da [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Camacho, Cristiane Farias [Fundacao Padre Leonel Franca, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    The universalization of access of the electric energy is one of the goals established by the Brazilian government so as to attend the rural and urban population. The arrival of electric energy in remote and low income areas allows these populations to reach one of the basic conditions to improve the quality of life and citizenship. In order to achieve this goal efficiently, it is necessary to build tools that make possible the impact and process evaluation, searching the continuous improvement of the planning and decision making, either in the direction of the attendance of the proposed goals, or in the poverty mitigation. The knowledge originated from evaluation impact studies provides an important contribution to the improvement of social programs, and a return to society as how the public fund is being managed, promoting transparency and focus. In this context, tolls are developed so as to support the impact and process evaluation in terms of rural electrification publics policies, using a study case that includes about 23.000 questionnaires in 21 states, considering the moment before the access (ex-ante) and after (ex-post), during the years of 2000 and 2004. (author)

  9. Development of test objects for image quality evaluation of digital mammography; Desenvolvimento de objetos de teste para avaliacao da qualidade da imagem em mamografia digital

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Vitor Nascimento de Carvalho

    2013-07-01

    Mammography is the image exam called 'gold standard' for early detection of breast cancer. 111 Brazil, more than eight million mammograms are carried out per year. With the advancement of technology, the digital systems CR and DR for this diagnostic modality have been increasingly implemented, replacing the conventional screen-film system, which brought environmental problems, like the disposal of chemical waste, and is also responsible for the rejection of radiographic films with processing artifacts. Digital systems, besides not experiencing the problem of environmental pollution, are still capable of image processing, allowing a much lower rejection rate when compared to the conventional system. Moreover, the determination of an accurate diagnosis is highly dependent on the image quality of the examination. To ensure the reliability of the images produced by these systems, it is necessary to evaluate them on a regular basis. Unfortunately, there is no regulation in Brazil about the Quality Assurance of these systems. The aim of this study was to develop a set of test objects that allow the evaluation of some parameters of image quality of these systems, such as field image uniformity, the linearity between the air Kerma incident on detector and the mean pixel value (MPV) of the image, the spatial resolution of the system through the modulation transfer function (MTF) and also to suggest an object to be applied in the evaluation of contrast-to-noise ratio (CNR) and signal-difference-to-noise ratio (SDNR). In order to test the objects. 10 mammography centers were evaluated, seven with CR systems and three with the DR systems. To evaluate the linearity, besides the test objects high sensitivity dosimeters were necessary to be used, namely LiF:Mg,Cu,P TL dosimeters. The use of these dosimeters was recommended in order to minimize the time required to perform the tests and to decrease the number of exposures needed. For evaluation of digital images in DICOM

  10. A regulatory model for conformity evaluation in natural gas building installations; Um modelo regulatorio para avaliacao da conformidade das instalacoes prediais de gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Fossa, Alberto Jose; Santos, Edmilson Moutinho dos [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Eletrotecnica e Energia

    2008-07-01

    The challenge of the Brazilian growth needs to consider necessarily the energy arrangements, and natural gas has relevant participation in this matter. The possibility of its end use that make possible an effective adequacy of our energy matrix must be supported by modern concepts of quality and conformity. In this particular, the program of 'Tecnologia Industrial Basica' (TIB), including concepts and application of conformity evaluation processes, is considered basic for the construction of a consistent gas market. This paper present the Brazilian reality related to TIB aspects and elements, from which it constructs a technician and regulatory building gas installations model proposal for a conformity evaluation program in the country. (author)

  11. Evaluation of performance of food packagings when treated with ionizing radiation; Avaliacao do desempenho de embalagens para alimentos quando submetidas a tratamento por radiacao ionizante

    Energy Technology Data Exchange (ETDEWEB)

    Moura, Esperidiana Augusta Barretos de

    2006-07-01

    In this study the mechanical properties (tensile strength and percentage elongation at break and penetration resistance), optical properties, gas oxygen and water vapor permeability, the overall migration tests into aqueous food simulant (3% aqueous acetic acid) and fatty food simulant (n-heptane), as well as the formation of volatile radiation product tests were used to evaluate the effects of ionizing radiation (gamma irradiation or electron-beam irradiation) on commercial monolayer and multilayer flexible plastics packaging materials. These films are two typical materials produced in Brazil for industrial meat packaging, one of them is a monolayer low-density polyethylene (LDPE) and other is a multilayer co extruded low-density polyethylene (LDPE), ethylene vinyl alcohol (EVOH), polyamide (PA) based film (LDPE/EVOH/PA). Film samples were irradiated with doses up to 30 kGy, at room temperature and in the presence of air with gamma rays using a {sup 60}Co facility and electron beam from 1.5 MeV electrostatic accelerator. Alterations of these properties were detected according to the dose applied initially eight day after irradiation took place and new alterations of these values when the properties were evaluate two to three months after irradiation process. The results showed that scission reactions are higher than cross-linking process for both studied films, irradiated with gamma rays and electron beam. The evaluated properties of the irradiated films were not affected significantly with the dose range and period studied. The monolayer Unipac PE-60 and the multilayer Lovaflex CH 130 films can be used as food packaging materials for food pasteurization and in the sterilization process of by ionizing radiation using a gamma facilities and electron beam accelerators in commercial scale. (author)

  12. Method for evaluating the applicability and application rate wastes in soil; Metodo para avaliacao da aplicabilidade e taxa de aplicacao de residuos em solo

    Energy Technology Data Exchange (ETDEWEB)

    Linhares, Monica Moreira [Partime (Brazil); Seabra, Paulo Negrais [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

    1991-01-01

    Land treatment of refinery solid wastes has been practiced in the last few years by some PETROBRAS refineries. The biodegradation process is dynamic and complex, and incorrect monitoring may destroy the potential of the soil. Due to great differences both in terms of soils and of residues, each case must be monitored individually. We therefore developed a monitoring method for land farming systems based on the impact of the waste on indigenous soil microbial populations. The method is extremely simple, requiring only a gas chromatograph to evaluate the CO{sub 2} evolution, and can detect possible causes for low efficiency biodegradation processes. Conditions should then be altered, to ensure adequate functioning of the system.The method also allows for determination of the applicability of candidate wastes and of acceptable waste application rates in soil. (author) 2 refs., 7 figs.

  13. Ergonomics in the licensing and evaluation of nuclear reactors control room; A ergonomia no licenciamento e na avaliacao de salas de controle de reatores nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Isaac Jose Antonio Luquetti dos [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil); Vidal, Mario Cesar Rodriguez [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia de Producao

    2002-07-01

    A nuclear control room is a complex system that controls a thermodynamic process used to produce electrical energy. The operators interact with the control room through interfaces that have significant implications to nuclear plant safety and influence the operator activity. The TMI (Three Mile Island) accident demonstrated that only the anthropometric aspects were not enough for an adequate nuclear control room design. The studies showed that the accident was aggravated because the designers had not considered adequately human factor aspects. After TMI accident, the designers introduce in the nuclear control room development only human factors standards and human factors guidelines. The ergonomics approaches was not considered. Our objective is introduce in nuclear control room design and nuclear control room evaluation, a methodology that. includes human factors standards, human factors guidelines and ergonomic approaches, the operator activity analysis. (author)

  14. Evaluation of mechanical properties in stainless alloy ferritic with 5 % molybdenum; Avaliacao das propriedades mecanicas em ligas inoxidaveis ferriticas com 5% de molibdenio

    Energy Technology Data Exchange (ETDEWEB)

    Lima Filho, V.X.; Gomes, F.H.F.; Guimaraes, R.F.; Saboia, F.H.C.; Abreu, H.F.G. de [Instituto Federal de Educacao, Ciencia e Tecnologia do Ceara (IFCE). Campus Maracanau, CE (Brazil)], e-mail: venceslau@ifce.edu.br

    2010-07-01

    The deterioration of equipment in the oil industry is caused by high aggressiveness in processing the same. One solution to this problem would increase the content of molybdenum (Mo) alloys, since this improves the corrosion resistance. As the increase of Mo content causes changes in mechanical properties, we sought to evaluate the mechanical properties of alloys with 5% Mo and different levels of chromium (Cr). Were performed metallography and hardness measurement of the alloys in the annealed condition. Subsequent tests were performed tensile and Charpy-V, both at room temperature. The results showed that 2% difference in the content of Cr did not significantly alter the mechanical properties of alloys. The alloys studied had higher values in measured properties when compared to commercial ferritic alloys with similar percentages of Cr. The high content of Mo resulted in a brittle at room temperature but ductile at temperatures above 70 degree C. (author)

  15. Evaluation of the potential of waste fondant glass in formulations of ceramic pasta; Avaliacao do potencial fundente do residuo de vidro em formulacoes de massas ceramicas

    Energy Technology Data Exchange (ETDEWEB)

    Soares Filho, J.E.; Santos, L.L. dos; Nascimento, R.M. do, E-mail: elsinhofilho@gmail.com [Universidade Federal do Rio Grande do Norte (PPGCEM/UFRN), RN (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Feitosa, A.O.; Dutra, R.P.S. [Universidade Federal da Paraiba (PPCEM/UFPB), PB (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais

    2014-07-01

    An increasing amount of waste generated and deposited on the environment, many unspecified decomposition with time, as is the case of the glass. Thinking about it, the purpose of this study is to evaluate the power of the flux residue on glass formulations porcelains, as a flux to feldspar replacement. This study was performed in comparison with a standard formulation. The raw materials were characterized in the diffraction X-ray fluorescence and X-ray thermal differential analysis, and determination of the technological properties of water absorption, linear contraction, ignition loss, apparent porosity and apparent specific gravity in the formulation standard and replacement of feldspar in different percentages of waste and processing conditions. Specimens of the formulations were subjected to assay of three points. Results indicate that the residue glass has the potential of being used as a flux material in the composition of the ceramic body reduces the apparent porosity and according to the technology of water absorption property. The ceramic mass standard was classified as semi-stoneware, the BIIa group, and after the addition of the residue in any of the three percentages evaluated was classified as sandstone, belonging to the group BIb.(author)

  16. An evaluation of the potential impacts of the 'gas aid'; Uma avaliacao dos impactos potenciais do 'auxilio gas'

    Energy Technology Data Exchange (ETDEWEB)

    Biazotto, Ana Lidia; Anuatti Neto, Francisco [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Economia, Administracao e Contabilidade

    2004-07-01

    In May of 2001, the prices to the final consumer of GLP were set free in the whole country; this procedure had the intention, to continue process of deregulation in the fuel sector, in accord with the Oil Law. The release of the prices of sale and shipping subsidies elimination, along with the elimination of the crossed subsidy, required the adoption of a 'gas aid' social program, aimed to guarantee the low profit families necessities attendance that would pay the additional fuel costs. The objective of this paper is to evaluate the gas aid program as its covering level and the economic and distributive efficiency. The study encloses the metropolitans regions investigated in the IBGE Family Budget Research of 1996. With base in the previously identification of the potential beneficiary of the program, and with them consumption profile, it was possible to evaluate the potential impact of the withdrawal of the subsidy in the hypothesis of the family be or not beneficiary of the program. Assuming that the targeting is perfect, it is compared the transference politics to the low profit families in relation to the previous politics of subsidize crossed. (author)

  17. Evaluation of biodegradation of bionanocomposites of PHB/PP-g-MA/vermiculite; Avaliacao da biodegradacao de bionanocompositos de PHB/PP-g-MA/vermiculita

    Energy Technology Data Exchange (ETDEWEB)

    Mesquita, P.J.P. de; Alves, T.S.; Barbosa, R., E-mail: tsaeng3@yahoo.com.br [Universidade Federal do Piaui (UFPI), Teresina, PI (Brazil). Programa de Pos-Graduacao em Ciencia dos Materiais; Andrade, D. de L.A.C.S. [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Programa de Pos- Graduacao em Ciencia e Engenharia de Materiais

    2014-07-01

    In this work, we evaluated the process of biodegradation of PHB bionanocomposites/PP-g-MA/clay. Films were prepared with compositions of 5% PP-g-MA and 3% clay (BIO5); and 2.5% PP-g-MA and 3% clay (BIO2.5). The biodegradation test was conducted according to ASTM G 160-03 for a period of 86 days. The evaluation of biodegradation was performed by optical microscopy (MO), loss of mass, FTIR and XRD. The bionanocomposites presented change of coloration and appearance of fissures. As for loss in mass in the system presented loss of BIO2,5 22.5% and 25.9% BIO5, for 86 days of simulated soil exposure. We also observed by FTIR sharp reduction in intensity of the band corresponding to the C = O groups, indicating that the microbial attack promoted cleavage of the ester group links. By XRD, reduction in the intensity of the peaks and enlargements of the same with increasing exposure time, proving the biodegradation behavior of bionanocomposites. (author)

  18. Geographic information systems as a tool for environmental evaluation of hydropower potential; Sistemas de informacoes geograficas como ferramenta para avaliacao ambiental de potenciais hidreletricos

    Energy Technology Data Exchange (ETDEWEB)

    Dzedzej, Maira; Correa, Fabio; Malta, Joao [IX Consultoria e Representacoes Ltda, Itajuba, MG (Brazil); Flauzino, Barbara Karoline [IX Consultoria e Representacoes Ltda, Itajuba, MG (Brazil); Universidade Federal de Itajuba (UNIFEI), MG (Brazil); Santos, Afonso Henriques Moreira [MS Consultoria Ltda, Itajuba, MG (Brazil); Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

    2010-07-01

    The hydropower plants are responsible for much of the energy generated in the country, there is also a large hydro potential in Brazilian rivers. This form of power generation is considered renewable and fits into the concept of sustainable development, however, social and environmental impacts from the implementation of hydropower projects are known and widely discussed, especially when it comes to large plants. In this context, study the environmental analysis of potential hydropower was incorporated at various stages of the studies implementation, in order to, identify environmental factors and that will restrict or impede construction, to obtain the best option for the environment, evaluate the role and of social and environmental impacts, contribute to improving the design and functionality of the enterprises in order to reduce overall costs, minimize conflicts and assist in preserving the environment. To fulfill these functions to a satisfactory and reliable level, it the study has increasingly used the techniques, tools and applications of Geographic Information Systems in the process of environmental assessment, since they provide procurement, integration, visualization and data analysis of natural resources, its uses and protection, offering greater security and speed in decision making. This paper presents some applications of GIS in environmental assessment processes, developed mainly in the steps of estimating hydropower potential, hydropower inventory, basic design and environmental licensing. (author)

  19. Evaluation of morphological changes of the skin after radiation-induced injury in Wistar rats;Avaliacao de alteracoes morfologicas da pele apos lesao radioinduzida em ratos Wistar

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Cherley Borba Vieira de

    2010-07-01

    The cancer covers a heterogeneous group of more than 100 diseases with different etiology and prognosis. Radiotherapy is one of the most commonly used treatment modalities, aiming at the destruction of cancer cells, using ionizing radiation. One of the limiting factors of radiotherapy is that radiation promotes the death of tumor cells in addition to injure healthy tissue neighboring the tumor, and may cause their death. Irradiation of the skin, accidental or for therapeutic purposes can trigger many injuries culminating in fibrosis, which implies functional alteration of the body. The evaluation of morphological effects associated with skin irradiation becomes essential to develop more effective radiation strategies and decreased morbidity; and in case of accidents, proper handling of the victim.Evaluate radio-induced dermal changes using a Wistar rats model irradiated with 10, 40 and 60Gy. Male Wistar rats, aged approximately three months, were pre-anesthetized with midazolam and xylazine and anesthetized with sodium pentobarbital, shaved in the back, immobilized on polystyrene support in the prone position and irradiated with doses of 10, 40 and 60 Gy, with 4MeV nominal energy electron beams. The skin was irradiated in a 3cm{sup 2} field, and used 0.5cm of tissue equivalent material, to obtain a homogeneous dose distribution. After irradiation, the animals remained on constant evaluation, and the lesions were recorded photographically. The animals were divided into groups and were killed on the irradiation day, 5, 10, 15, 25 and 100 days after irradiation. The skin was fixed in 10% formaldehyde; the samples were embedded in paraffin and cut. The sections were stained with hematoxylin-eosin, picrosirius red and immuno stained with antibody anti-TGF beta1. Another part of the tissue was fixed in 2.5% glutaraldehyde and processed for scanning electron microscopy. It was observed macroscopically the appearance of skin lesions similar to burns on the entire

  20. Evaluation of emissions in gas powered electric generator engine with vegetable oil; Avaliacao das emissoes de gases em motor gerador eletrico alimentado com oleo vegetal

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Thalita C. de; Cunha, Joao Paulo Barreto; Cotrim, Suzane Santana; Brito, Gustavo Mendes; Delmond, Josue Gomes [Universidade Estadual de Goias (UNUCET/UEG), Anapolis, GO (Brazil). Unidade Universitaria de Ciencias Exatas e Tecnologicas], E-mail: thalitacarrijo@gmail.com

    2012-11-01

    The use of vegetable oils as fuel in diesel engines is a good alternative to reduce emissions of greenhouse gases in the atmosphere from the use of fossil fuels, either in pure form or as biodiesel. The soybean, oilseed single high-availability in Brazil, is the most viable feedstock for the production of oil and its use as a fuel because of the structure of production, distribution and grain crushing. This study aimed to evaluate the performance of a duty diesel generator fueled with blends of diesel and soybean oil at concentrations of 10%, 25%, 50% and 75%, and soybean oil pure, 100%. During the tests we evaluated the energy consumption of the generator and the emission of greenhouse gases (O{sub 2}, CO, CO{sub 2}, NO{sub x} and SO{sub 2}), according to the demand of electric charges (0, 500, 1000, 1500 and 2000 Watts) connected to the group generator. The results, using the F test, showed that the hourly consumption of fuel increased with increasing concentration in the mixture of diesel fuel and engine load demand from the generator. It follows that in the environment, increasing the oil concentration in the mixture caused a reduction in emissions, except for the emission of oxygen. The best choice for the operation for the engine generator using vegetable oil soya be provided for up to 60 % oil in the mixture and load demand up to 1000W, in which occurred lower emissions of carbon monoxide (CO) and therefore improved efficiency in the combustion process. (author)

  1. Evaluation of the reconstruction method and effect of partial volume in brain scintiscanning; Avaliacao do metodo de reconstrucao e efeito do volume parcial em cintilografia cerebral

    Energy Technology Data Exchange (ETDEWEB)

    Pinheiro, Monica Araujo

    2016-10-01

    Alzheimer's disease is a neurodegenerative disorder, on which occurs a progressive and irreversible destruction of neurons. According to the World Health Organization (WHO) 35.6 million people are living with dementia, being recommended that governments prioritize early diagnosis techniques. Laboratory and psychological tests for cognitive assessment are conducted and further complemented by neurological imaging from nuclear medicine exams in order to establish an accurate diagnosis. The image quality evaluation and reconstruction process effects are important tools in clinical routine. In the present work, these quality parameters were studied, and the effects of partial volume (PVE) for lesions of different sizes and geometries that are attributed to the limited resolution of the equipment. In dementia diagnosis, this effect can be confused with intake losses due to cerebral cortex atrophy. The evaluation was conducted by two phantoms of different shapes as suggested by (a) American College of Radiology (ACR) and (b) National Electrical Manufacturers Association (NEMA) for Contrast, Contrast-to-Noise Ratio (CNR) and Recovery Coefficient (RC) calculation versus lesions shape and size. Technetium-99m radionuclide was used in a local brain scintigraphy protocol, for proportions lesion to background of 2:1, 4:1, 6:1, 8:1 and 10:1. Fourteen reconstruction methods were used for each concentration applying different filters and algorithms. Before the analysis of all image properties, the conclusion is that the predominant effect is the partial volume, leading to errors of measurement of more than 80%. Furthermore, it was demonstrate that the most effective method of reconstruction is FBP with Metz filter, providing better contrast and contrast to noise ratio results. In addition, this method shows the best Recovery Coefficients correction for each lesion. The ACR phantom showed the best results assigned to a more precise reconstruction of a cylinder, which does not

  2. Evaluation of safety requirements of erbium laser equipment used in dentistry; Avaliacao de requisitos de seguranca de um equipamento a laser de erbio para fins odontologicos

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Flavio Hamilton

    2002-07-01

    The erbium laser (Er:YAG) has been used in several therapeutic processes. Erbium lasers, however, operate with energies capable to produce lesions in biological tissues. Aiming the safe use, the commercialization of therapeutic laser equipment is controlled in Brazil, where the equipment should comply with quality and safety requirement prescribed in technical regulations. The objective of this work is to evaluate the quality and safety requirements of a commercial therapeutic erbium laser according to Brazilian regulations, and to discuss a risk control program intended to minimize the accidental exposition at dangerous laser radiation levels. It was verified that the analyzed laser can produce lesions in the skin and eyes, when exposed to laser radiation at distances smaller than 80 cm by 10 s or more. In these conditions, the use of protection glasses is recommended to the personnel that have access to the laser operation ambient. It was verified that the user's training and the presence of a target indicator are fundamental to avoid damages in the skin and buccal cavity. It was also verified that the knowledge and the correct use of the equipment safety devices, and the application of technical and administrative measures is efficient to minimize the risk of dangerous expositions to the laser radiation. (author)

  3. Dynamic system for the evaluation of CIM monitoring and control techniques; Sistema dinamico para avaliacao de tecnicas de monitoracao e controle da CIM

    Energy Technology Data Exchange (ETDEWEB)

    Penna, Monica de Oliveira [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Biotecnologia e Ecossistemas]. E-mail: mpena@cenpes.petrobras.com.br; Baptista, Walmar; Brito, Rosane Fernandes de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Tecnologia de Materiais, Equipamentos e Corrosao]. E-mails: walmar@cenpes.petrobras.com.br; rosanef@cenpes.petrobras.com.br; Silva, Edilson Domingos da; Nascimento, Juliana Rangel do [Fundacao Gorceix, Ouro Preto, MG (Brazil)]. E-mails: edilson@cenpes.petrobras.com.br; julianarn@cenpes.petrobras.com.br; Coutinho, Claudia M.L.M. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Inst. de Biologia. Dept. de Biologia Celular e Molecular

    2002-03-01

    In general, the two main problems associated to the water injection system for secondary petroleum recovery are the corrosion control and the decrease in solid injection in the reservoir. Corrosion problems in injection water systems may have abiotic as well as biotic causes, and the occurrence of reservoir plugs can result from the injection of particles (suspended solids as well as corrosion products), bacteria and fouling formation. Due to the need to implement a methodology for the evaluation of abiotic and biotic corrosive processes, monitoring techniques and MIC control in a dynamic system, an apparatus was built that simulates the characteristics of a water injection system. The apparatus allows monitoring and control of the parameters that, when varied, may influence the performance of the quality of the injected water. The dynamic system was designed to simulate as precisely as possible the conditions that allow the SRB and heterotrophic bacteria to create fouling in a water injection system. This article discusses the dynamic system, analytical methods and some preliminary results. (author)

  4. Photoluminescence evaluation of TiO{sub 2} synthesized by Pechini method; Avaliacao da fotoluminescencia do TiO{sub 2} sintetizado pelo metodo Pechini

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, D.S.; Diniz, V.C.S.; Dantas, J.; Araujo, P.M.A.G.; Costa, A.C.F.M., E-mail: dagobertoufcg@gmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Viana, R.S.; Junior, S.A. [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. Quimica Fundamental; Torquato, R.A. [Universidade Federal da Paraiba (UFPB), Joao Pessoa, PB (Brazil). Dept. de Engenharia de Materiais

    2017-07-15

    Titanium dioxide (TiO{sub 2}) stands out for use in various applications mainly due to its properties of thermal and chemical stability and its excellent optical properties. However, these properties are dependent on the type and phase morphology, which is related to the TiO{sub 2} processing method. Thus, this paper proposed to synthesize TiO{sub 2} nanoparticles by polymeric precursor method with different polymorphs, and evaluate the influence of these phases in the photoluminescent properties. For this, the stoichiometric molar proportions of citric acid:metallic cations of 1:1, 2:1, 3:1, 4:1 and 5:1 were investigated. The nanoparticles were characterized by X-ray diffraction (XRD), infrared spectroscopy, textural analysis, scanning electron microscopy (SEM), excitation and emission spectroscopy and determination of the band gap by UV-Vis diffuse reflectance spectroscopy. The presence of anatase and rutile was confirmed by XRD in different proportions for each sample. The agglomerate size increased with the citric acid/metal cations ratio as observed by SEM. Concerning photoluminescence, the maximum intensity in the emission spectrum occurred at the wavelength of 533 nm for the 3:1 sample and the maximum intensity in the excitation spectrum occurred for the 2:1 sample at the wavelength of 451 nm. (author)

  5. Method of evaluation of diagnostics reference levels in computerized tomography; Metodo de avaliacao de niveis de referencia de radiodiagnostico em tomografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Vega, Walter Flores

    1999-04-01

    Computerized tomography is a complex technique with several selectable exposition parameters delivering high doses to the patient. In this work it was developed a simple methodology to evaluate diagnostic reference levels in computerized tomography, using the concept of Multiple Scan Average Dose (MSAD), recently adopted by the Health Ministry. For evaluation of the MSAD, a dose distribution was obtained through a measured dose profile on the axial axis of a water phantom with thermoluminescence dosemeters, TLD-100, for different exam technique. The MSAD was evaluated hrough two distinct methods. First, it was evaluated by the integration of the dose profile of a single slice and, second, obtained by the integration on central slice of the profile of several slices. The latter is in of accordance with the ionization chamber method, suggesting to be the most practical method of dose evaluation to be applied in the diagnostic reference level assessment routine for CT, using TLDs. (author)

  6. Evaluation of parameters associated with monitoring in vivo of uranium isotopes in the lungs; Avaliacao de parametros associados a monitoracao in vivo de isotopos de uranio nos pulmoes

    Energy Technology Data Exchange (ETDEWEB)

    Juppa, Silvia P.; Lucena, Eder A.; Dantas, Bernardo M.; Dantas, Ana Leticia A., E-mail: adantas@ird.gov.br [Instiluto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Laboratorio de Monitoracao In Vivo. Divisao de Dosimetria

    2013-11-01

    The objective of this study is to evaluate the parameters associated with the technique of monitoring individuals exposed to uranium isotopes, aiming to optimize the technique and reduced uncertainties associated.

  7. Bacteriological evaluation of fresh chicken sausage submitted to gamma radiation; Avaliacao bacteriologica da linguica de frango Frescal submetida a radiacao gama

    Energy Technology Data Exchange (ETDEWEB)

    Borges, Alexandre

    2002-07-01

    light of the lack of present data on the irradiation of fresh chicken sausage, the objective of this study is to evaluate determine the efficiency of this method as a process for reducing the microbial load via measurement of the bacteriology of the product before and after gamma radiation. 45 sample of chicken sausage(acquired directly from the poultry industry) were prepared divided in 3 treatments: the first is a control, the second and third using application of 1,5 and 3,0 kGy, respectively. The chicken sausages irradiated with a dose of 1,5 kGy did not have, statistically significant results apparent in the bacteriological measures. Samples irradiated with 3,0 kGy did experience statistically significant reductions. It is concluded that the irradiating the product with a dose of 3,0 kGy is more effective for the reduction of bacterial population, with the data in these trials indicating a 95,3% reduction in total coliforms, 100% removal of fecal coliforms, and 84,0% reduction of mesophiles, relative to the control samples. (author)

  8. Diagnosis and evaluation of surveying examination by intracranial tumor in dogs CT; Diagnostico e avaliacao topografica de neoplasias intracranianas pelo exame de TC em caes

    Energy Technology Data Exchange (ETDEWEB)

    Romaldini, Andre Fonseca; Santos, Debora Rodrigues dos; Oliveira, Juliana Messias; Abreu, Felipe Andrei Suarez; Wallace, Verena; Pacheco, Eduardo Nelson da Silva, E-mail: andreromaldini@gmail.com [Hospital Santa Ines de Sao Paulo, Santana, SP (Brazil)

    2012-07-01

    The use of computed tomography (CT) revolutionized image diagnostic in veterinary medicine and currently can be considered one of the most useful tools for the imaging evaluation of intracranial tumor in dogs. Computed tomography of the brain in small animals allows visualization of intracranial tumor, compression of adjacent structures such as cerebral parenchyma, falx or lateral ventricles, and evaluate secondary hemorrhages and edema. The CT imaging provides essential information to indicate the surgical approach for a possible tumor resection or biopsy, including the correct location and boundaries structures involved, and also can be used to monitor the clinical treatment. However, only histopathological examination is able to confirm the final diagnosis. (author)

  9. Economic and financial evaluation of the wind power project in Northeast region, Brazil; Avaliacao economico-financeira de projeto de central eolica na regiao nordeste

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Paulo Glicio da; Lima, Maria Angela de Queiroz; Melo Junior, Adalberto de Bastos [Companhia Hidro Eletrica do Sao Francisco (DFPL/CHESF), Recife, PE (Brazil). Div. de Planejamento Economico-Financeiro], Emails: paulogr@chesf.gov.br, angelq@chesf.gov.br, adalbert@chesf.gov.br; Bezerra, Pedro; Bittencourt, Rogerio [Companhia Hidro Eletrica do Sao Francisco (DEFA/CHESF), Recife, PE (Brazil). Div. de Projetos de Fontes Alternativas], E-mails: pbezerra@chesf.gov.br, rogeriob@chesf.gov.br

    2000-07-01

    This work deals with the analysis of economic and financial feasibility of using wind power in the Northeast region for electric power production, considering the new electricity sector model. The case study presented here refers to the design of a 50 MW Wind Farm in the region, based on preliminary data from wind collected in the period from 1993 to 1995. Some programs were used to evaluate this project: ALWIN, which estimates the potential for wind energy production; NEWAVE for determination operating marginal costs and generation plants values and ANAFIN, for economic and financial evaluation of the project, using scenarios, through the deterministic and probabilistic analysis.

  10. Use of different simulators to quality evaluation of image quality in digital mammography; Utilizacao de diferentes simuladores na avaliacao da qualidade da imagem em mamografia digital

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Leslie S.; Coutinho, Celia M.C., E-mail: leslie@ird.gov.br, E-mail: celia@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Magalhaes, Luis A.G.; Almeida, Carlos Eduardo de, E-mail: luisalexandregm@hotmail.com, E-mail: cea71@yahoo.com.br [Universidade do Estado do Rio de Janeiro (LCR/UERJ), Rio de Janeiro, RJ (Brazil). Laboratorio de Ciencias Radiologicas

    2013-11-01

    In this study, the digital images were acquired with different exposure simulators to evaluate the quality of the image, noting the tumor mass detection, microcalcification fiber and representing regions of interest during mammography. The technical parameters of exposure depends on the thickness and composition of the breast, thus affecting the dose and image quality. The simulators were used: ACR, SBP 1054, BREAST PHANTOM CIRS and for evaluation of image quality, as well as measures kerma incident on the entrance surface (Ki) and calculating the mean glandular dose (MGD)

  11. Density evaluation by computerized tomography in plain soils over different manipulation systems; Avaliacao da densidade pelo metodo da tomografia computadorizada de um planossolo sob diferentes sistemas de manejo

    Energy Technology Data Exchange (ETDEWEB)

    Pedrotti, Alceu [Lavras Univ., MG (Brazil). Dept. de Ciencia do Solo; Pauletto, Eloy Antonio [Pelotas Univ., RS (Brazil). Dept. de Solos; Crestana, Silvio [Empresa Brasileira de Pesquisa Agropecuaria (EMBRAPA), Sao Carlos, SP (Brazil). Centro Nacional de Pesquisa e Desenvolvimento de Instrumentacao Agropecuaria (CNPDIA)

    1996-08-01

    The objective of this paper is the evaluation of a plain soil density in different culture systems determined by X ray computerized tomography.It was observed a larger variation in densities in soils profiles analysed. The identification of layers is better utilising computerized tomography than others technic 1 fig.

  12. Evaluation of quality of tomographs of Rio de Janeiro state, Brazil; Avaliacao da qualidade dos tomografos do estado do Rio de Janeiro

    Energy Technology Data Exchange (ETDEWEB)

    Travassos, P.C.B.; Belem, V.R.; Magalhaes, L.A.; Almeida, C.E.A. de, E-mail: luisalexandregm@hotmail.com [Instituto de Radioprotecao e Dosimetria, (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Lab. de Ciencias Radiologicas

    2014-07-01

    Computerized tomographs used in 56 institutions in the state of Rio de Janeiro were evaluated. Criteria of image quality and dosimetry were submitted. The results showed that some not performed optimize their protocols examinations or perform wrongly, which results in an increase in the dose received by patients, and an image in compromised quality. (author)

  13. Magnetic resonance imaging pre- and postoperative evaluation of tetralogy of Fallot; Avaliacao pre e pos-operatoria da tetralogia de Fallot por ressonancia magnetica

    Energy Technology Data Exchange (ETDEWEB)

    Bernardes, Renata Junqueira Moll; Simoes, Luiz Carlos [Instituto Nacional de Cardiologia (INC), Rio de Janeiro, RJ (Brazil). Servico de Cardiologia da Crianca e do Adolescente; Marchiori, Edson [Universidade Federal Fluminense, Niteroi, RJ (Brazil). Faculdade de Medicina. Dept. de Radiologia]. E-mail: edmarchiori@bol.com.br; Bernardes, Paulo Manuel de Barros; Gonzaga, Maria Beatriz Albano Monzo [Rede Labs/D' Or, Rio de Janeiro, RJ (Brazil)

    2004-08-01

    The purpose of this study was to assess the usefulness of magnetic resonance imaging (MRI) in the pre- and postoperative evaluation of patients with tetralogy of Fallot. Twenty patients aged 1 to 29 years were prospectively evaluated with black-blood and contrast-enhanced angiographic techniques, 11 with the classic form of tetralogy of Fallot and 9 with tetralogy of Fallot and pulmonary atresia. MRI studies provided adequate visualization of the aorta that was classified as dilated or not dilated, and definition of its position in all cases. The use of contrast-enhanced MR angiographic techniques provided excellent imaging of the main right and left pulmonary arteries. The results suggest that MRI, including contrast-enhanced angiography techniques, is a useful tool in the evaluation of patients with tetralogy of Fallot before and after cardiac surgery since it provides important anatomical information that is not always obtained with echocardiography. MRI can be considered an alternative to cardiac catheterization, particularly in the evaluation of the pulmonary vascular anatomy. (author)

  14. Falling hammer use evaluation for hot deformation hardness testing; Avaliacao do uso de um martelo de queda, para a determinacao da resistencia a deformacao a quente

    Energy Technology Data Exchange (ETDEWEB)

    Beck, J.C.P.C.; Cauduro, Carlos R.; Schaeffer, Lirio [Rio Grande do Sul Univ., Porto Alegre, RS (Brazil)

    1990-12-31

    This work performs a evaluation of the characteristics hot leaking of a 8620 stainless steel, deformed at 870 deg C. The tools associated with the measurements was described and a comparison between the theoretical values and the values experimentally obtained from the performed tests. 5 figs., 3 refs.

  15. Evaluation of the impacts of the gas aid program in Sao Paulo state, Brazil; Avaliacao dos impactos do programa do auxilio-gas no estado de Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, Thiago Pamplona [Universidade de Sao Paulo (FEARP-USP), Ribeirao Preto, SP (Brazil). Fac. de Economia, Administracao e Contabilidade; Anuatti Neto, Francisco [Universidade de Sao Paulo (PIPGE/USP), SP (Brazil). Programa Interunidades de Pos-Graduacao em Energia

    2008-07-01

    The objective of this article is to evaluate the coverage and the economic impact of the Federal Government Program Aid Gas (Auxilio Gas) , started in the year of 2002. The evaluation covers only the state of Sao Paulo, using as source the Research of Familiar Budgets of IBGE 2002/2003. To evaluate the coverage of 'Aid-Gas' the targeted population is compared with the population that effectively received the benefit. To evaluate the economic impact of the program a test of significance of dummy variable that differentiate weight gas consumption on income for those attended by the program, controlled by Working-Leser function that models the covariates of gas expenses. A low coverage of the program was evidenced, only 32,098 families had received the benefit (4,01%) out of 786.929 families targeted group, those with per capita income was inferior the half minimum wage. The economic impact had mixed results. In one hand program beneficiaries would spend a larger percentage of income with gas consumption than those not reached; on the other hand, they would have access larger quantities of the product. If the food consumption and the gas consumption are correlated, and the families not benefited by the program are rationed, it is possible to confirm that the introduction of the program would increase welfare of families. (author)

  16. Technique applied in the evaluation of the UFCC reactor at Refinaria Alberto Pasqualini (REFAP), PETROBRAS; Tecnicas utilizadas na avaliacao do reator da UFCC da REFAP

    Energy Technology Data Exchange (ETDEWEB)

    Cascaes, Ronesio da Silva [PETROBRAS (Brazil) Refinaria Alberto Pasqualini

    1994-01-01

    Main problems found in the maintenance of the Fluidized Catalytic Cracking (FCC) unity, searches of metal alteration properties, metallographic evaluations, failures and micro-structures alterations are presented. Micrographic analysis of the structural samples, the methodology to detect the failures and physical and chemical essays utilized in the inspection are also reported 13 refs., 64 figs., 1 tab.

  17. Evaluation of thermoluminescent BeO samples in standard radiotherapy beams; Avaliacao de amostras termoluminescentes de BeO em feixes padroes de radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Groppo, Daniela P.; Silva, Jonas O.; Caldas, Linda V.E., E-mail: daniela.piai.groppo@gmail.com [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2012-08-15

    Beryllium oxide thermoluminescent samples were evaluated in standard radiotherapy beams of low energy. Results for response reproducibility, dose-response curve and energy dependence were obtained. The lower detection limit was determined. The pellets of BeO showed their usefulness for beam dosimetry. (author)

  18. Evaluation of uniformity and noise consistency test in computerized tomography; Avaliacao do teste de constancia de uniformidade e ruido em tomografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Garrafiel, Fabricio N.; Lykawka, Rochelle; Bacelar, Alexandre; Anes, Mauricio [Hospital de Clinicas de Porto Alegre (HCPA), Porto Alegre, RS (Brazil); Alva-Sanchez, Mirko S.; Pianoschi, Thatiane [Universidade Federal de Ciencias da Saude de Porto Alegre (UFCSPA), Porto Alegre, RS (Brazil)

    2016-07-01

    The quality control in computed tomography (CT) includes constancy tests concerning CT number measured in a water tank and its response as uniformity, noise and accuracy. Differences to It's performance limits and frequency established by the national legislation and the manufacturers are well known. The objective of this study was to evaluate these tests proceeding the periodicity of national legislation. The tests were conducted over a three equipment of different manufacturers. Each equipment has acquisition parameters and specific phantoms. The equipment presented adequate performance and consistency when compared their results to the limits determined by manufacturers and national legislation. Thus, it is important to evaluate these differences and tailor the testing protocols to meet the established quality requirements. (author)

  19. Bone injuries in the post-traumatic knee: evaluation by magnetic resonance imaging; Comprometimento osseo do joelho pos-trauma: avaliacao pela ressonancia magnetica

    Energy Technology Data Exchange (ETDEWEB)

    De Grossi, Carla Martins [Universidade Federal, Rio de Janeiro, RJ (Brazil). Curso de Pos-graduacao em Radiologia; Marchiori, Edson [Universidade Federal Fluminense, Niteroi, RJ (Brazil). Servico de Radiologia; Santos, Alair Augusto S.M.D. dos [Hospital Santa Cruz, Niteroi, RJ (Brazil). Servico de Radiologia]. E-mail: edmarchiori@zipmail.com.br

    2001-06-01

    This paper presents the results of 50 patients with trauma of the knee submitted to magnetic resonance imaging in the period of January 1996 to December 1997. The appearance and incidence of the main bone lesions were evaluated and correlated with the mechanisms of aggression and with clinical data. Associated lesions were also evaluated. Bone contusions were the most commonly findings encountered and were observed in 38 patients (76%). Osteochondral fractures occurred in five patients (10%) and bone fractures were detected in five patients (10%), of which two were associated with contusions in other adjoining bone compartments. Chondromalacia of the patella was observed only in two patients (4%). We concluded that magnetic resonance imaging is the imaging method of choice for the diagnosis of bone lesions in patients with trauma of the knee. (author)

  20. Magnetic resonance imaging textural evaluation of posterior cranial fossa tumors in childhood; Avaliacao textural por ressonancia magnetica dos tumores da fossa posterior em criancas

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Joelson Alves dos; Costa, Maria Olivia Rodrigues da; Otaduy, Maria Concepcion Garcia; Lacerda, Maria Teresa Carvalho de; Leite, Claudia da Costa [Sao Paulo Univ., SP (Brazil). Faculdade de Medicina. Dept. de Radiologia]. E-mail: joelson_alves@ig.com.br; Matsushita, Hamilton [Sao Paulo Univ., SP (Brazil). Faculdade de Medicina. Dept. de Neurologia

    2004-08-01

    Objective: To distinguish healthy from pathological tissues in pediatric patients with posterior cranial fossa tumors using calculated textural parameters from magnetic resonance images. Materials And Methods: We evaluated 14 pediatric patients with posterior cranial fossa tumors using the software MaZda to define the texture parameters in selected regions of interest representing healthy and pathological tissues based on T2-weighted magnetic resonance images. Results: There was a statistically significant difference between normal and tumoral tissues as well as between supposedly normal tissues adjacent and distant from the tumoral lesion. Conclusion: Magnetic resonance textural evaluation is an useful tool for determining differences among various tissues, including tissues that appear apparently normal on visual analysis. (author)

  1. Evaluation of poly(vinylpyrrolidone) and collagen by Low Field Nuclear Magnetic Resonance Spectroscopy; Avaliacao da polivinilpirrolidona e do colageno por ressonancia magnetica nuclear de baixo campo

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Paula de M.; Tavares, Maria I.B. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Macromoleculas Professora Eloisa Mano]. E-mail: pmcosta@ima.ufrj.br

    2005-07-01

    Blends of natural and synthetic polymers represent a new class of materials with better mechanical properties and biocompatibility than those of the single components. Collagen and poly(vinylpyrrolidone) are well known for their important biological properties. The blending of collagen with poly(vinylpyrrolidone) makes it possible to obtain new materials in which strong interactions between the synthetic and biological components occur. Do to the excellent biocompatibility of these polymers, this blend has been much studied intending biomedical applications. And a one technique that can provide important information on molecular mobility, compatibility and even evaluate the interactions that can occur with these polymers is the Low Field Nuclear Magnetic Resonance Spectroscopy. Thus, the purpose of this work is to evaluate collagen and poly(vinylpyrrolidone) by Low Field Nuclear Magnetic Resonance Spectroscopy. From the values of relaxation times obtained, we can conclude that these materials have different interactions, and different mobility domains, confirming the heterogeneity and complexity of these materials. (author)

  2. Sensory evaluation of black beans submitted to gamma radiation from Cobalt-60; Avaliacao sensorial de feijao preto submetido a radiacao de Cobalto-60

    Energy Technology Data Exchange (ETDEWEB)

    Moura, Neila Camargo de; Canniatti-Brazaca, Solange Guidolin; Spoto, Marta Helena Fillet, E-mail: sgcbraza@esalq.usp.b [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil). Dept. de Agroindustria, Alimentos e Nutricao; Arthur, Valter [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil). Secao de Entomologia e Irradiacao de Alimentos

    2005-04-15

    The objective of this research was to evaluate the sensory aspects of black beans submitted to gamma radiation from {sup 60}Co. The study involved eight panelists, between 17 to 23 years old, who were selected and trained for the descriptive analysis of appearance, aroma, flavor and texture. The panelists analyzed alterations of appearance, aroma, flavor and texture of non-irradiated and irradiated black beans with doses 2, 4, 6, 8 and 10kGy. The results were analyzed by test F, ANOVA and the Tukey test (5%), with the use of computers and the sensory analysis software Compusense Five and SAS. The results showed that irradiated samples decreased the bitter flavor, accentuated color and brightness and samples non-irradiated dry texture. The radiation treatment is a good method for conservation of black beans in doses evaluated in this study.(author)

  3. Isolation and evaluation of cytotoxic potential of phenolic derivatives from Schinus terebinthifolius Raddi (Anacardiaceae); Isolamento e avaliacao do potencial citotoxico de derivados fenolicos de Schinus terebinthifolius Raddi (Anacardiaceae)

    Energy Technology Data Exchange (ETDEWEB)

    Santana, Jeferson S.; Sartorelli, Patricia; Lago, Joao Henrique G. [Universidade Federal de Sao Paulo (UNIFESP), Diadema, SP (Brazil). Inst. de Ciencias Ambientais, Quimicas e Farmaceuticas; Matsuo, Alisson L., E-mail: joao.lago@unifesp.br [Universidade Federal de Sao Paulo (UNIFESP), Sao Paulo, SP (Brazil). Dept. de Micro, Imuno e Parasitologia

    2012-07-01

    The EtOH extract from leaves of S. terebinthifolius was subjected to partition between EtOH:H{sub 2}O and hexane, CH{sub 2}Cl{sub 2}, and EtOAc. The phases obtained were evaluated in vitro against human tumoral cell lines and the EtOAc phase exhibited activity. Chromatographic procedures afforded gallic acid (1), methyl (2) and ethyl (3) gallates, trans-catechin (4), quercitrin (5), and afzelin (6), being the first occurrence of 1, 4 and 6 in S. terebinthifolius. In vitro cytotoxic evaluation of 1 - 6 indicated that gallic acid (1) displayed higher activity than ethyl gallate (3) against HL-60 and HeLa cells, while compounds 2, 4 - 6 were inactive. (author)

  4. Preliminary results of the evaluation of biomass use as energy sources; Resultados preliminares da avaliacao do uso de biomassas como fontes de energia

    Energy Technology Data Exchange (ETDEWEB)

    Rocha Ferreira, Leo da; Tourinho, Octavio A.F. [Instituto de Planejamento Economico e Social (IPES), Rio de Janeiro, RJ (Brazil). Inst. de Pesquisas

    1985-12-31

    This article discusses the preliminary results of the BIOMASSA model of IPEA with emphasis on three aspects: temporal and spatial crop mix patterns along the analysis horizon; evaluation of the social cost of alcohol fuel ; and the impact of alcohol production on the balance of payments. It concludes that the PROALCOOL increases domestic costs, but the impact on the balance of payments is positive and substantial. (author). 8 tabs

  5. Evaluation of differential risk of arrest of drilling and polymeric fluids; Avaliacao do risco de prisao diferencial de fluidos de perfuracao hidroargilosos e polimericos

    Energy Technology Data Exchange (ETDEWEB)

    Sarmento, L.R.B.; Lira, D.S.; Nascimento, R.C.A.M.; Amorim, L.V. [Universidadde Federal de Campina Grande (UFCG), PB (Brazil)], Email: ligia_rafa@hotmail.com

    2010-07-01

    This work evaluates the risk of differential sticking (DS) of clay and water based drilling fluids, before and after adding polymer and lubricant additives, and polymeric fluids. From the results, it was concluded that the addition of lubricant to the clay and water based fluids reduces the torque necessary to free the pipes that are stuck by differential pressure, as for the polymeric fluids presented the lowest filtration losses, cake thickness, differential sticking coefficient and DS risk. (author)

  6. Evaluation of the strengthening of the conditions of voltage security using sensitivity analysis; Avaliacao do reforco das condicoes da seguranca de tensao utilizando a analise de sensibilidade

    Energy Technology Data Exchange (ETDEWEB)

    Rosa, A.L.S.; Costa, V.M. da; Peres, W. [Universidade Federal de Juiz de Fora (UFJF), MG (Brazil). Faculdade de Engenharia], Emails: arleilucas@gmail.com, vander@lacee.ufjf.br, wesley.peres@yahoo.com.br; Prada, R.B. [Pontificia Universidade Catolica (PUC-Rio), Rio de Janeiro, RJ (Brazil). Dept. de Engenharia Eletrica], Email: prada@ele.puc-rio.br

    2009-07-01

    Voltage stability or voltage security analysis has motivated an expressive attention of power systems researchers. In this work, a simple and fast method evaluates voltage security and proposes conditions to improve the loading margin. System analysis is carried out in terms of active power transmission path. Sensitivity analysis provides the most adequate buses to active and reactive power redispatch. A sequential iterative methodology to reinforce system conditions is presented. (author)

  7. Proposal for a technical-economic and environmental evaluation projects for distributed generation; Proposta de avaliacao tecnica-economica-ambiental para projetos de geracao distribuida

    Energy Technology Data Exchange (ETDEWEB)

    Fortes, Marcio Zamboti [Universidade Severino Sombra, Vassouras, RJ (Brazil); Gouvea, Marcos Roberto [Universidade de Sao Paulo (USP), SP (Brazil)

    2008-07-01

    The multi discipline effects in engineering projects, mainly in those of infrastructure, have extended the borders of research to not only evaluate them of the conventional point of view, economic and technical, but also environmental and social. On the other hand, the investor who traditionally searched alternatives only considering the economic and financial performance currently is taken to analyze also the social and environmental aspects. The model described in this paper is a solution proposal to evaluate the merit of an enterprise of distributed generation of thermal origin, considering the economic, social and environmental aspects, using merit indexes that quantify, directly, economic aspects as capital return tax and operating income eliminates, as well as social factors like the impact in the education, health, income and employment rates and still, it verifies the attendance of the environmental restrictions. The solution presented brings a simple and clear form to attribute a merit degree of aggregate to the alternatives to embed distributed generation, considering the intensity of the subjective social responsibility of the investor. The presented model is an important contribution to stimulate a form to evaluate and to prioritize the multi discipline implementation to a distributed generation enterprise, also being able, to be used as financial index or other incentives of the sort. (author)

  8. Computational tool for postoperative evaluation of cochlear implant patients; Ferramenta computacional para avaliacao pos-operatoria de pacientes com implante coclear

    Energy Technology Data Exchange (ETDEWEB)

    Giacomini, Guilherme; Pavan, Ana Luiza M.; Pina, Diana R. de [Universidade Estadual Paulista Julio de Mesquita Filho (IBB/UNESP), Botucatu, SP (Brazil). Instituto de Biociencias; Altemani, Joao M.C.; Castilho, Arthur M. [Universidade Estadual de Campinas (HC/UNICAMP), Campinas, SP (Brazil). Hospital de Clinicas

    2016-07-01

    The aim of this study was to develop a tool to calculate the insertion depth angle of cochlear implants, from computed tomography exams. The tool uses different image processing techniques, such as thresholding and active contour. Then, we compared the average insertion depth angle of three different implant manufacturers. The developed tool can be used, in the future, to compare the insertion depth angle of the cochlear implant with postoperative response of patient's hearing. (author)

  9. Synthesis and preliminary evaluation of N-acylhydrazone compounds as antibacterial and antifungal agents; Sintese e avaliacao preliminar da atividade antibacteriana e antifungica de derivados N-acilidrazonicos

    Energy Technology Data Exchange (ETDEWEB)

    Cachiba, Thomas Haruo; Carvalho, Bruno Demartini; Carvalho, Diogo Teixeira [Universidade Federal de Alfenas, MG (Brazil). Fac. de Ciencias Farmaceuticas. Dept. de Alimentos e Medicamentos; Cusinato, Marina; Prado, Clara Gaviao; Dias, Amanda Latercia Tranches, E-mail: diogo.carvalho@unifal-mg.edu.br [Universidade Federal de Alfenas, MG (Brazil). Inst. de Ciencias Biomedicas

    2012-07-01

    We describe the synthesis and evaluation of N-acylhydrazone compounds bearing different electron-donating groups in one of its aromatic rings, obtained using a four-step synthetic route. IC{sub 50} values against pathogenic fungi and bacteria were determined by serial microdilution. Compounds showed low activity against Staphylococcus aureus, Escherichia coli and Pseudomonas aeruginosa. By contrast, a derivative with a meta-oriented electron-donating group showed significant activity (IC50) against Candida albicans (17 {mu}M), C. krusei (34 {mu}M) and C. tropicalis (17 {mu}M). Results suggest this is a promising lead-compound for synthesis of potent antifungal agents. (author)

  10. Evaluation of X ray attenuation by means of radiographic images; Avaliacao da atenuacao da radiacao X por meio de imagens radiograficas

    Energy Technology Data Exchange (ETDEWEB)

    Barros, Frieda Saicla, E-mail: saicla@utfpr.edu.b [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Paredes, Ramon S.C., E-mail: ramon@ufpr.b [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil); Godoi, Walmor C., E-mail: walmor.godoi@gmail.co [Faculdade de Tecnologia Camoes (FATEC), Curitiba, PR (Brazil); Souza, Gabriel Pinto de [Universidade Estadual Paulista (UNESP), SP (Brazil)

    2011-07-01

    This paper's main goal is to adopt a qualitative methodology to evaluate the attenuation of x-radiation through X-ray images in polymeric materials plus residual lead. To determinate the images it was initially used an experimental setup at the Laboratory for Materials Diagnostics LACTEC. These results correspond to a more qualitative analysis, even with quantitative answers. Through analysis of radiographic images we can measure the intensity of radiation that goes through the plate, making possible to establish a relationship between the attenuation coefficient and the thickness of the material. (author)

  11. Evaluation of ultrasonic technique to characterize the concentration of boric acid in liquid medium; Avaliacao de tecnica ultrassonica para medida de concentracao de acido borico em meio liquido

    Energy Technology Data Exchange (ETDEWEB)

    Kohara, Richard Yuzo Ramida

    2015-06-01

    This dissertation is to analyze the viability of using ultrasonic technique to characterize the concentration of boric acid in liquid medium non-invasively, therefore, ultrasonic tests were performed relating different boric acid concentrations with the travel time of the ultrasonic wave, also were evaluated factors able to mask the characterization of these concentrations by ultrasonic technique. The results showed that the ultrasonic technique allows the characterization of boric acid concentrations in liquid medium in very simple terms by the ultrasonic wave travel time, requiring further studies in complex conditions. (author)

  12. Evaluation of the aging of polymeric drilling fluids to oil wells; Avaliacao do envelhecimento de fluidos de perfuracao polimericos para pocos de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Farias, K.V.; Amorim, L.V. [Universidade Federal de Campina Grande, PB (Brazil). Unidade Academica de Engenharia Mecanica, UAEM/CCT - UFCG], e-mail: kassie@dem.ufcg.edu.br; Leite, R.S. [Universidade Federal de Campina Grande, PB (Brazil). Graduacao Engenharia de Materiais; Lira, H.L. [Universidade Federal de Campina Grande, PB (Brazil). Unidade Academica de Engenharia de Materiais, UAEMa/ CCT - UFCG

    2010-07-01

    The aim of this work is to evaluate the aging of polymeric drilling fluids to oil wells, from the rheological, filtration and lubricity properties in the temperatures 100 degree F ({approx} 38 degree C) and 150 degree F ({approx} 66 degree C). The results had been compared with a standard fluid used for the oil industry and had evidenced that the polymeric fluids had presented good thermal stability, presenting a small reduction in the rheological properties and better values of lubricity coefficient that a reference fluid. (author)

  13. Evaluation of absorbed radiation dose rate in a didactic X-ray equipment; Avaliacao da taxa de dose absorvida em um equipamento de raios-X didatico

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Phelipe Amaral Ferreira; Perini, Ana Paula; Neves, Lucio Pereira, E-mail: lucio.neves@ufu.br [Universidade Federal de Uberlandia (UFU), MG (Brazil). Instituto de Fisica

    2016-07-01

    This work was performed in order to create a new didactic experiment in the X-ray apparatus of PHYWE, where the saturation current was obtained through a free air ionization chamber. The values of saturation currents were obtained in two ways. Initially, the anodic DDP was kept constant and the anodic current was varied. In the second way, the anodic current was kept constant while the anodic DDP was varied. Therefore, we were able to evaluate the dependence of the absolved dose rate in relation to the DDP and the tube current. (author)

  14. Evaluation of the elephant grass (Pennisetum purpureum Schum) aiming the coal fuel production; Avaliacao do capim-elefante (Pennisetum purpureum Schum) visando o carvoejamento

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Joao Batista de; Ferrari Junior, Evaldo; Beisman, Darcy Antonio; Werner, Joaquim Carlos; Ghisi, Odete Maria A.A.; Leite, Vanderley Benedito de Oliveira [Instituto de Zootecnica, Nova Odessa, SP (Brazil)

    2000-07-01

    It was conducted, in the research farms of the Instituto de Zootecnia, at Nova Odessa and Brotas, 2 experiments to evaluate dry matter yield of elephant grass, cv Guacu, upon 4 rates of nitrogen (50, 100, 200 or 400 kg N/ha/year) and 3 cut frequencies (2, 3 or 4 cuts/year). The experiments were set in randomized block design, with 4 replications. The treatments were arranged in a 4 x 3 factorial. The dry matter yield increased as nitrogen rates increased and cut frequency decreased. (author)

  15. Evaluation of performance of electronic dosimeters for individual monitoring: tests in laboratory; Avaliacao do desempenho de dosimetros eletronicos para monitoracao individual: testes em laboratorio

    Energy Technology Data Exchange (ETDEWEB)

    Garzon, W.J.; Khoury, H.J.; Barros, V.S.M. de, E-mail: wjaramig@gmail.com [Universidade Federal de Pernambuco (UFPE), Recife (Brazil). Departamento de Energia Nuclear. Laboratorio de Metrologia das Radiacoes Ionizantes; Medeiros, R.B. [Universidade Federal de Sao Paulo (EPM/UNIFESP), Sao Paulo, SP (Brazil). Departamento de Diagnostico por Imagem

    2015-07-01

    Electronic dosimeters based on direct ion storage technology are being widely used in many countries for individual monitoring in many applications of ionizing radiation. However, their use as routine dosimeter has been established in a few countries due to lack of accreditation or intercomparison programs. The objective of this study is to evaluate the performance of two direct íon storage dosimeters model available in the international market: the Miriom-Instadose-1 and RADOS DIS-1 to be eventually accepted for individual monitoring in Brazil. (author)

  16. Impact of an evaluation quality program of mammography service of Distrito Federal - Brasil; Impacto de um programa de avaliacao da qualidade dos servicos de mamografia do Distrito Federal

    Energy Technology Data Exchange (ETDEWEB)

    Correa, Rosangela da Silveira

    2002-07-01

    Cancer is the second cause of death for Brazilian women and breast cancer is the most common neoplasm amongst women. Mammography is an essential tool for diagnosis and early detection of this disease. In order to be effective, the mammography must be of good quality. This study sought to evaluate the quality of these services in the Federal District and the impact of an intervention involving inspection and education. The universe of 41 mammography services in the Federal District was studied between June and August 2001. Two instruments were used 1) a proposed evaluation protocol of the National Agency for Health Surveillance (ANVISA) and 2) a protocol for evaluation of image quality and care. The intervention included the initial inspection, a training activity, and a formal notification by the health authorities of the Federal District. Image quality was compared before and after the intervention. The existing infrastructure in the DF is of good quality, but the services have low productivity, they do not treat patients sent by the public health system, they have an inadequate geographic distribution with most in the central neighborhood, and the low income female population has restricted access to early detection of cancer. Of the 36 services who completed the study, none was above 90% conformity in image quality before the interventions, whereas 10 were above 90% afterwards. The greatest improvements were in chassis maintenance (services without chassis with defects went from 10 to 25), breast compression (services in conformity went from 7 to 20) and visualization of micro calcifications (32 services in conformity before and 35 afterwards). The results of the ANVISA protocol bore no relation to final image quality, a central issue for early cancer detection. In spite of the existence of many services, most were not of quality and population access was restricted. The intervention under study was shown to be effective for improving quality, nevertheless

  17. Comparative evaluation of hybrid systems of natural gas cogeneration and sugar cane bagasse; Avaliacao comparativa de sistemas hibridos de cogeracao a gas natutral e bagaco de cana

    Energy Technology Data Exchange (ETDEWEB)

    Zamboni, Leonardo Moneci; Tribess, Arlindo [Sao Paulo Univ., SP (Brazil). Escola Politecnica. Dept. de Engenharia Mecanica]. E-mail: leonardo.zamboni@poli.usp.br; atribess@usp.br

    2006-07-01

    The consumption of electricity in Brazil and mainly in the State of Sao Paulo is increasing gradually. On the other hand, the hydraulic potential is practically exhausted and the government has no resources for such new investments. One solution is the construction of thermo electrical plants with the use of the natural gas and sugar cane bagasse. The natural gas has the advantage of being available in great amount and less pollutant. And the sugar cane bagasse, besides being a by-product of low value, does not cause a global pollution. The work consists of the determination of the best option considering criterion of minimum cost for kWh of energy produced. For such, thermo economic analysis with electricity and steam production costs evaluation in exergetic basis, was accomplished. In the evaluations the consumption of natural gas and the costs of the sugar cane bagasse were varied. The results show that the cogeneration plant with combined cycle using natural gas and burning sugar cane bagasse in the recovery boiler presents the smallest cost of electricity and steam generation (even not being the cycle with larger exergetic efficiency). On the other hand, for a natural gas cost of 140 US$/t and a cost of sugar cane bagasse superior to 10,50 US$/t the cogeneration plant with combined cycle using only natural gas (and, therefore not burning or gasifying sugar cane bagasse) presented the smallest cost of electricity and steam generation. (author)

  18. Radiographic and tomographic evaluation of total hybrid hip replacement in dogs; Avaliacao radiografica e tomografica de caes submetidosa artroplastia coxofemoral total hibrida

    Energy Technology Data Exchange (ETDEWEB)

    Minto, B.W., E-mail: brunowminto@gmail.com [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Jaboticabal, SP (Brazil); Brandao, C.V.S.; Pereira, G.J.C.; Babicsak, V.R.; Vulcano, L.C.; Rossetto, V.J.V. [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Botucatu, SP (Brazil)

    2016-11-15

    The total hip arthroplasty is the most effective surgical technique for the treatment of severe canine hip dysplasia. Currently, the radiographic examination is the most common method used to assess this procedure in dogs, but has some limitations. CT scan by computed tomography instead enables the acquisition of images without overlap, thereby determining the positioning of prosthetic components with greater accuracy. This research aimed to evaluate by radiography and CT scan examinations the use of a hybrid modular total hip prosthesis developed and made in Brazil, applied experimentally in healthy dogs. Six skeletally mature dogs, which previously underwent surgery on the left hip joint were used. The dogs underwent CT scan at 360 days and three years after surgery. All animals showed good positioning of prosthetic components, and proper joint reduction. In the CT scan, however, it was possible to detect irregular fill areas in some animals. In addition, CT scan allowed the detection and monitoring of areas of bone resorption around the acetabular component. Therefore, the CT scan was useful in the evaluation of prosthetic joints, with the advantage of optimum sharpness of the images and allowing for the possibility of quantifying peri-prosthetic changes and measure joint, fundamental relations for late postoperative follow-up. (author)

  19. Evaluation of Trichogramma spp. for the control of Trichoplusia ni;Avaliacao de Trichogramma spp. para o controle de Trichoplusia ni

    Energy Technology Data Exchange (ETDEWEB)

    Milanez, Andre Malacarne, E-mail: andremalak@hotmail.co [Universidade Federal Rural de Pernambuco (UFRPE), Recife, PE (Brazil). Dept. de Agronomia e Entomologia; Pratissoli, Dirceu; Polanczyk, Ricardo Antonio; Tufik, Camila Borges Antonio, E-mail: pratissoli@cca.ufes.b, E-mail: ricardo@cca.ufes.b, E-mail: camila_btufik@hotmail.co [Universidade Federal do Espirito Santo (UFES), Alegre, ES (Brazil). Dept. de Producao Vegetal; Bueno, Adeney de Freitas, E-mail: adeney@pq.cnpq.b [EMBRAPA Soja, Londrina, PR (Brazil)

    2009-10-15

    The objective of this study was to evaluate the biological characteristics of the parasitoids Trichogramma acacioi, T. atopovirilia, T. marandobai, T. demoraesi, T. exiguum (two lines), and T. pretiosum (six lines), reared on eggs of Trichoplusia ni. The experiment was carried out in a completely randomized design, with 15 replicates. The biological characteristics evaluated were: parasitism, viability, sexual ratio and number of individuals per egg. The parasitism percentage varied between 7.66 and 53%, with highest value observed for Trichogramma pretiosum Tspd line, and the lowest for the T. pretiosum Trecife line. There was no significant difference for the viability, which remained higher than 85%. The sex ratio varied from 0.75 to 1, and Tspd line showed the lowest value. The number of individuals per egg varied between 2.39 for T. marandobai (Tm1 line) and 1.34 for T. exiguum (Te1 line). T. pretiosum (Tspd line) was the species with the best performance in laboratory with the highest values observed in parasitism and in viability. (author)

  20. Evaluation of technological alternative for low emission gasoline in PETROBRAS; Avaliacao de alternativas tecnologicas para gasolina de baixa emissao na PETROPBRAS

    Energy Technology Data Exchange (ETDEWEB)

    Gilbert, William Richard [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Gerencia de Tecnologia de Catalisadores de FCC - TFCC

    2004-07-01

    More than 30% of the total NO and CO emitted to the atmosphere and up to 20% of the CO{sub 2} are produced by automobiles. New smart fuel injection systems and the three-way catalytic converter in the automobile tail pipes have dramatically reduced NO and CO emissions, but have also required a profound change in gasoline specifications, particularly in the case of sulfur content. In Brazil, the refining of Campos basin heavy crude oils with a high concentration of nitrogen and the gasoline production strongly dependent of the FCC process, have introduced additional challenges. In this work, classic solutions such as FCC feed hydrotreatment, cracked naphta post-treatment, and the use of FCC gasoline sulfur reduction catalyst additives applied to the PETROBRAS scenario will be discussed. Changes to the FCC process to produce future fuels with lower aromaticity and lower emissions in new HCCI motors, which have hybrid characteristics between Diesel and Otto power-trains will also be discussed. (author)

  1. Evaluation of operational management in the oil terminals using human factor indicator; Avaliacao da gestao operacional em terminais com o uso do indicador de fator humano

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, George L.D. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Lima, Gilson Brito Alves [Universidade Federal Fluminense, Niteroi, RJ (Brazil). LATEC. Mestrado Profissional em Sistemas de Gestao

    2005-07-01

    This research has as objective to analyze the continuous improvement in a management system at TRANSPETRO in Madre de Deus Terminal (BA), environment and occupational health, particularly in the reduction of the accident levels. We consider relevant in this research the effective implementation of the human factor that includes the boarding of the work system relating them it three points: individual activities, organizational processes of work and activities, emphasizing the management of these resources and the communication between them. The case study it was make in a company of logistic of fuels. The methodology was lead through bibliographical research and applied closed questionnaire (adaptation's baseline API 770 - Manager's Guide to Reducing Human Errors Improving - Improving in the Process Industries) in 2003 and 2005 with the manager, coordinators, supervisors, operators and others technician. Were analyzed results of the company in management security and occupational health, such as: pointers of the tax of frequency of accidents with and without removal, volume of leaked product and results of internal and external audits. We conclude that the importance of the human factor in the Safety Management that propitiated significant progress in the organization during the development of the research. (author)

  2. Synthesis and evaluation of bone cement with different concentrations of brushite; Sintese e avaliacao de cimento osseo com diferentes concentracoes de brushita

    Energy Technology Data Exchange (ETDEWEB)

    Morua, O.C.; Cardoso, M.J.B.; Farias, K.A.S.; Barbero, M.A.R.; Carrodeguas, R.G.; Fook, M.V.L., E-mail: cumberbatch.otto@gmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Dept. de Ciencias e Engenharia de Materiais; Laboratorio de Desenvolvimento e Avaliacao de Biomateriais (CERTBIO/UFCG), PB (Brazil); Instituto de Ceramica y Vidrio (CSIC), Madrid (Spain); AzureBio SL, Tres Cantos, Madrid (Spain)

    2017-10-01

    The objective of this study was to chemically synthesize brushite bone cement in different compositions and to evaluate the microstructural formation, crystalline phases present and the influence of the compositions and amount of water on the mechanical property of compression resistance. Characterized by X-ray diffraction, Raman spectroscopy, scanning electron microscopy and mechanical properties. The XRD results confirmed the presence of the brushite and wollastonite phases. In the SEM it was verified the presence of particle agglomerates of each phase and a reduction of the particle sizes. In mechanical properties, it was observed that the amount of water influenced both the porosity and the compressive strength of the compositions. It was concluded that the synthesized brushite bone cement presented the expected crystalline phases and morphology, both the compositions and the amount of water influenced the mechanical properties of the developed cement. (author)

  3. Phytochemical study and evaluation of anti-inflammatory activity of Aeschynomene fluminensis Vell. (Fabaceae); Estudo fitoquimico e avaliacao da atividade anti-inflamatoria de Aeschynomene fluminensis Vell. (Fabaceae)

    Energy Technology Data Exchange (ETDEWEB)

    Ignoato, Marlene Capelin; Fabrao, Rodrigo Monteiro; Schuquel, Ivania Teresinha Albrecht; Botelho, Marcos Felipe Pinatto; Santin, Silvana Maria de Oliveira [Universidade Estadual de Maringa (UEM) PR (Brazil). Dept. de Quimica; Arruda, Laura Licia Milani de; Bersani-Amado, Ciomar Aparecida [Universidade Estadual de Maringa (UEM) PR (Brazil). Dept. de Farmacologia e Terapeutica; Souza, Maria Conceicao de, E-mail: smoliveira@uem.br [Universidade Estadual de Maringa (UEM) PR (Brazil). Dept. de Biologia

    2012-07-01

    Phytochemical investigation of Aeschynomene fluminensis leaves and branches led to isolation of the flavonoid glycosides kaempferol 3,7-di-O-{alpha}-L-rhamnopyranoside, kaempferol 7-O-{alpha}-L-rhamnopyranoside, kaempferol 3-O-apiofuranosil-7-O- rhamnopyranoside, quercetin 3-O-{alpha}-L-rhamnopyranoside, quercetin 3-O-arabinofuranoside, 8-{beta}-D-glucopyranosyl 4',5,7-trihydroxyflavanone, the isoflavonoid 4',7-di-hydroxy-isoflavone, the dimer epicatechin-(2{beta} ->7, 4{beta} ->8)- epicatechin, the polyol 3-O-methyl-chiro-inositol and two steroids in sitosterol and stigmasterol mixture. These compounds were identified by NMR {sup 1}H and {sup 13}C and compared with literature data. Anti-inflammatory activity of the crude methanolic extract and its fractions was evaluated (author)

  4. Evaluation of radon measuring technique using passive detector activated carbon; Avaliacao da tecnica de medicao do radonio utilizando detector passivo com carvao ativado

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Paulo Roberto Rocha; Lessa, Edmilson de Lima; Oliveira, Evaldo Paulo de, E-mail: epoliveira@aluno.ird.gov.br [Instituto de Radioprotecao e Dosimetria, (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Radioprotecao Ambiental e Ocupacional

    2014-07-01

    This study aims to evaluate the efficiency of measuring the radioactive gas Radon ({sup 222} Rn) with passive detector activated carbon. Alpha Guard, exposure chamber, air sampler, default font Radio, calibrator flow, flow adjuster, ducts drivers: For this, various equipment to make the measurement system as were used. An assembly of such equipment, with specific sequence was used allowing for more efficient exposure of passive detectors Radon gas. Twenty samples were heated to remove moisture and then stored in desiccator until the experiment were made. The exhibition was held passive dosimeters being removed from the chamber, and one hour after, subjected to analysis by gamma spectrometry in germanium (HPGe) for an hour. Subsequently, other measurements were made at scheduled times and sequential for one hour. The results were presented in report form and spectra, measures and graphs generated by Alpha Guard were also extracted. Finally we calculated the efficiency of the passive meter activated carbon. (author)

  5. Evaluation of quality control of radiopharmaceuticals in Nuclear Medicine service; Avaliacao do controle de qualidade de radiofarmacos em servico de medicina nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Tavares, Jamille A. Lopes; Lira, Renata F. de, E-mail: jam_alt@hotmail.com, E-mail: renatafariasdelira@hotmail.com [Universidade Federal de Pernambuco (UFPE), Recife (Brazil); Santos, Marcus Aurelio P. dos, E-mail: masantos@cnen.gov.br [Centro Regional de Ciencias Nucleares do Nordeste (CRCN-NE/CNEN-PE), Recife, PE (Brazil)

    2014-07-01

    Radiopharmaceuticals are a type of pharmaceutical preparation associated with radionuclides with purpose of diagnosis and therapy. Nuclear Medicine Services (NMS) should perform quality control of radiopharmaceuticals according to the recommendations of the manufacturer and scientific evidences accepted by the National Agency Sanitary Surveillance ( Brazilian ANVISA). This study evaluated the quality of the main radiopharmaceuticals in a NMS of the state of Pernambuco in relation to pH and radiochemical purity. The results showed that 96.8% of the radiopharmaceuticals showed radiochemical purity and all pH values were within the range recommended by the American pharmacopoeia. The study found that the quality control when inserted into the NMS, provides important data that allows exclusion of radiopharmaceuticals with low radiochemistry purity, favoring a reliable diagnosis and ensuring good radiation protection practices and biosecurity for patient and occupationally exposed individuals.

  6. Evaluation of the degree of dispersion of organoclay on nanocomposites with PP/EPDM; Avaliacao do grau de dispersao de argilas organofilicas em nanocompositos de PP/EPDM

    Energy Technology Data Exchange (ETDEWEB)

    Braga, F.C.F.; Oliveira, M.G., E-mail: fernanda.braga@int.gov.b [Instituto Nacional de Tecnologia (DPCM/INT), Rio de Janeiro, RJ (Brazil). Div. de Processamento e Caracterizacao de Materiais; Furtado, C.R.G. [Universidade do Estado do Rio de Janeiro (UERJ), Rio de Janeiro, RJ (Brazil)

    2010-07-01

    Nanocomposites of thermoplastic elastomer (TPE) composed by PP/EPDM 1/1 blend and organoclay were obtained by the melt intercalation in an internal chamber mix. Initially, a masterbatch of maleinized polypropylene (PP-MA) and clay modified with alkyl ammonium salt in the ratio 3:1 was prepared, and then, added to TPE matrix to obtain loads of 2,5; 5 and 7 wt% of clay in the nanocomposite. The dispersion degree of clay in TPE matrix was evaluated by X-ray diffraction and parallel plate rheometry. The intercalation/exfoliate degree or the degree of dispersion varied with clay content, as observed by X-ray diffraction. This behavior was confirmed by the profile of the curves of elastic modulus versus frequency, which presented different slopes in the region of low frequency, due to the presence of clay and PP-MA. (author)

  7. Sintering evaluation of spinel MA nanostructured obtained via synthesis of combustion in solution; Avaliacao da sinterizacao de espinelio MA nanoestruturado obtido via combustao em solucao

    Energy Technology Data Exchange (ETDEWEB)

    Vitor, P.A.M.; Braganca, S.R.; Bergmann, C.P., E-mail: pedroaugusto89@hotmail.com [Universidade Federal do Rio Grande do Sul (LACER/UFRGS), Porto Alegre, RS (Brazil). Laboratorio de Materiais Ceramicos

    2016-07-01

    Specimens were shaped from powders of spinel MA (MgAl2O4) obtained via synthesis combustion in solution (SCS) from the trio chemical precursor aluminum nitrate, magnesium nitrate and sucrose in water, and then sintered at different temperatures between 1350 and 1650 ° C. Were evaluated the physical properties (density, porosity, water absorption and linear shrinkage), mechanical (flexural 4 points), and the microstructures (SEM) as a function of sintering temperature. The densification increased with growing the value of the sintering temperature, wherein the temperature to 1650 ° C had the highest flexural strength and higher elastic modulus: 51.33 (± 6.83) and 26.16 MPa (± 5.06) GPa respectively. The study confirmed the microstructure of the densification of the particles, confirming the purity and nature of nanometric powders obtained via the SCS. (author)

  8. Evaluation of bioactivity in vitro of endodontic calcium aluminate cement; Avaliacao da bioatividade in vitro de cimento endodontico a base de aluminato de calcio

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, I.R.; Andrade, T.L.; Santos, G.L., E-mail: ivonero@univap.br [Universidade do Vale do Paraiba (UNIVAP), Sao Jose dos Campos, SP (Brazil); Pandolfelli, V.C. [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil)

    2011-07-01

    Bioactivity is referred to as the capacity of a material to develop a stable bond with living tissue via the deposition of hydroxyapatite. Materials which exhibit this property can be used to repair diseased or damaged bone tissue and can be designed to remain in situ indefinitely. An indication of bioactivity can be obtained by the formation of a hydroxyapatite layer on the surface of a substrate in simulated body fluids (SBF) in vitro. Therefore, set samples of calcium aluminate endodontic cement were maintained in contact with SBF solutions (Kokubo and Rigo) and their surfaces were later evaluated by means of SEM, EDX and DRX. Measurements of pH and ionic conductivity were also carried out for SBF solutions in contact with set samples of endodontic cement. The ideal conditions of precipitation were obtained in SBF Rigo been observed a surface layer with spherical morphology characteristic of stoichiometric hydroxyapatite.(author)

  9. The use of MATLAB-SIMULINK for evaluation of thermal building behavior; O uso do MATLAB-SIMULINK para avaliacao do comportamento termico de ambientes

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, Nathan; Oliveira, Gustavo H.C.; Araujo, Humberto X. de [Pontificia Universidade Catolica do Parana, Curitiba, PR (Brazil). Lab. de Sistemas Termicos]|[Pontificia Universidade Catolica do Parana, Curitiba, PR (Brazil). Lab. de Automacao e Sistemas]. E-mail: nmendes@ccet.pucpr.br; oliv@ ccet.pucpr.br; araujo@ ccet.pucpr.br

    2000-07-01

    We describe a mathematical model applied to both building thermal analysis and control systems design. We use a lumped approach to model the room air temperature and a multi-layer model for the building envelope. The capacitance model allows to study the transient analysis of room air temperature when it is submitted to sinusoidal variation of external air temperature, representing a case study for the city of Curitiba-PR, Brazil. To evaluate the building performance with thermal parameters, we use MATLAB/SIMULINK. In the results section, we show the influences of thermal capacitance on the building air temperature and energy consumption and the advantages of using MATLAB/SIMULINK in building thermal and energy analysis as well. (author)

  10. Evaluation of nano emulsion containing asphaltenes dispersant additive in dehydration of oil; Avaliacao de nanoemulsoes contendo aditivo dispersante de asfaltenos na desidratacao de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Priscila F. de; Rodrigues, Jessica S.; Mansur, Claudia R.E. [Universidade Federal do Rio de Janeiro/ Instituto de Macromoleculas/ Laboratorio de Macromoleculas e Coloides na Industria de Petroleo, Rio de Janeiro, RJ (Brazil)], e-mail: prisfrias@hotmail.com

    2011-07-01

    Due to the problem of the formation of emulsions type water-oil during oil production, new alternatives of the breakdown of these emulsions have been proposed over the years. Several polymers have been used to destabilize these emulsions and among them are those based on polyphenylene ether. The aim of this study was to develop nanoemulsions type oil / water, where an asphaltenes dispersant additive was dissolved in dispersed phase in order to evaluate them as a new alternative in the breakdown of oil emulsions. The nanoemulsions were prepared in the presence of surfactant based on polyoxide using a high pressure homogenizer (HPH). We obtained stable nanoemulsions for more than 30 days in the presence or absence of additive. These nanoemulsions were effective in water /oil phase separation, and the nanoemulsion containing the dispersant additive provided a faster separation of these phases. (author)

  11. Microstructural evaluation of a varistor block utilized in high voltage surge arresters; Avaliacao microestrutural de um bloco varistor utilizado em para-raios de alta tensao

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, J.M. de; Dias, R.; Furtado, J.G. de M., E-mail: jma_ime@yahoo.com.b [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil); Assuncao, F.C.R. [Pontificia Univ. Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil)

    2010-07-01

    Varistor is a semiconductor ceramic device characterized to have a high non-linear electrical resistance, it is used as active element of surge arresters with purpose of protecting of electro-electronics systems. Its properties are directly dependents of chemical composition and microstructural characteristics, such as grain size, porosity, twins and phases distribution. This work has the objective to characterize microstructurally a commercial varistor block of ZnO used in high voltage surge arrest and from this characterization to infer aspects about of its electrical macroscopic performance. DRX and SEM-EDS were used for microstructural analysis. The microstructural evaluation allows pointing the critical points of microstructure and, suggest relevant aspects to the improvement of commercial varistor microstructure, optimizing the electrothermal behavior of the device. (author)

  12. Stresses and residual stresses optical measurements systems evaluation; Avaliacao de sistemas opticos de medicao de tensoes e tensoes residuais em dutos

    Energy Technology Data Exchange (ETDEWEB)

    Peixoto Filho, Flavio Tito; Goncalves Junior, Armando Albertazzi [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Lab. de Metrologia e Automatizacao (LABMETRO)

    2004-07-01

    There is always a constant concern about the pipelines' integrity. An important control parameter is the level of total mechanical stresses acting over the pipeline. However, the loading and residual stresses acting on a pipeline are not measured in the field as much as necessary. Technical difficulties and the high cost of the nowadays techniques and the hostile measurement conditions are the main reason for that. An alternative method has been developed at the Universidade Federal de Santa Catarina (UFSC) since 1992. A new optical measurement device is used to measure strains, mechanical stresses and residual stresses acting over the structure. A metrological and functional evaluation of this system is the main focus of this paper. (author)

  13. Evaluation of glycerol derivative as emulsifier for oil based drilling fluids; Avaliacao de derivados de glicerina como emulsificante para fluidos de perfuracao de base oleo

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Susan A. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Escola de Quimica; Cavalcanti, Milena Y.; Rodrigues Junior, Jorge; Lachter, Elizabeth R.; Nascimento, Regina Sandra V. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Inst. de Quimica

    2008-07-01

    In view of the growing search for new applications for the surplus glycerine of biodiesel production, the use of a glycerine derivative as emulsifier in oil based muds is proposed in this work. Glycerine monooleate was synthesized through esterification reaction, and characterized by NMR{sup 13}C. Its applicability as emulsifier was verified through electric stability tests performed on inverted phase drilling fluids. The obtained results were compared with two formulations containing different emulsifiers (sorbitol monooleate and trimethylolpropane monooleate). It was also evaluated the rheological properties of the formulated fluids through standard tests. It was verified that the fluid that contained the glycerine derivative showed considerably better electric stability results than the other systems. It also presented rheological properties similar to the ones shown by the system that contained the commercial emulsifier (sorbitol monooleate). Thus, it was found that glycerine monooleate is a potential substitute to the currently emulsifiers (author)

  14. Evaluation of the capacity of heavy metal adsorption in exfoliated vermiculite; Avaliacao da capacidade de adsorcao de metal pesado em vermiculitas esfoliadas

    Energy Technology Data Exchange (ETDEWEB)

    Lima, J.F.; Silva, P.S.; Hanken, R.B.L. [Universidade Federal de Campina Grande (UAEMa/UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais; Raposo, C.M.O., E-mail: raposo@dmg.ufcg.edu.b [Universidade Federal de Campina Grande (UAMG/UFCG), Bodocongo, PB (Brazil). Unidade Academica de Mineracao e Geologia

    2009-07-01

    Many groups from modern society have seen with attention the issues of pollutants, generally present in nature, those same that have caused irreversible damages to the environment. The Vermiculite, a phyllosilicate, with t-o-t structure, have high interlamelar charge, has been studied as cationic exchanger, whose application when exfoliated, are increased. This work has the objective of evaluate the absorption capacity of chromium (III), in different concentrations, in high, slim and medium concentrations of exfoliated vermiculites. The results obtained from the characterization by spectroscopy in infrared and by diffraction of x-ray from prepared solids showed important variations in the quantity of adsorbed metal in order the size of the concentrated particles. (author)

  15. Performance evaluation of an automatic positioning system for photovoltaic panels; Avaliacao de desempenho de um sistema de posicionamento automatico para paineis fotovoltaicos

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Alceu Ferreira; Cagnon, Jose Angelo [Universidade Estadual Paulista (FEB/UNESP), Bauru, SP (Brazil). Fac. de Engenharia], Emails: alceu@feb.unesp.br, jacagnon@feb.unesp.br

    2009-07-01

    The need of using electric energy in localities not attended by the utilities has motivated the development of this research, whose main approach was photovoltaic systems and the search for better performance of these systems with the solar panels positioning toward the sun. This work presents the performance evaluation of an automatic positioning system for photovoltaic panels taking in account the increase in generation of electric energy and its costs of implantation. It was designed a simplified electromechanical device, which is able to support and to move a photovoltaic panel along the day and along the year, keeping its surface aimed to the sun rays, without using sensors and with optimization of movements, due the adjustment of panel's inclination take place only once a day. The obtained results indicated that the proposal is viable, showing a compatible cost compared to the increase in the generation of electricity. (author)

  16. Chemical constituents and evaluation of antibacterial activity of Macroptilium lathyroides (L.) Urb. (Fabaceae); Constituintes quimicos e avaliacao da atividade antibacteriana de Macroptilium lathyroides (L.) Urb. (Fabaceae)

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Leoncio M. de; Gois, Roberto W. da S.; Lemos, Telma L. G.; Arriaga, Angela M. C.; Andrade-Neto, Manoel [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Departamento de Quimica Organica; Santiago, Gilvandete M.P., E-mail: gil@ufc.br [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Departamento de Farmacia; Braz-Filho, Raimundo [Universidade Estadual do Norte Fluminense (UENF), Campos dos Goytacazes, RJ (Brazil). Centro de Ciencias e Tecnologias; Costa, Jose G.M. da; Rodrigues, Fabiola F.G. [Universidade Regional do Cariri, Crato, CE (Brazil). Departamento de Quimica Biologica

    2013-11-01

    The chemical investigation of the stems and branches of Macroptilium lathyroides led to the isolation of a mixture of {beta}-sitosterol and stigmasterol. The extracts from the roots allowed the isolation of lasiodiplodin, a mixture of stigmast-4-en-6{beta}-ol-3-one and stigmast-4,22-dien-6{beta}-ol-3-one, de-O-methyllasiodiplodin, genistein and lupinalbin A. The structures of the isolated compounds were assigned on the basis of their NMR data, including comparison of their spectral data with values described in the literature. The antibacterial activity of crude extracts from stems, branches and roots was evaluated. This is the first report involving the chemical investigation of this species. (author)

  17. Biodegradation evaluation of recycled polyethylene doped with Moringa oleifera oil; Avaliacao da biodegradacao de filmes de polietileno reciclado dopados com oleo de Moringa oleifera

    Energy Technology Data Exchange (ETDEWEB)

    Bicalho, Luciana A.; Novack, Katia M.; Melo, Tania M.S., E-mail: knovack@iceb.ufop.br [Dept. de Quimica (DEQUI) - Universidade Federal de Ouro Preto (UFOP), Ouro Preto, MG (Brazil)

    2011-07-01

    Chemical modifications and use of additives are some of the mainly ways to obtain polymer materials with especial properties. Vegetable oils incorporated to polymers preserve their structure while make possible a reduction of degradation rate. This work proposed the use of polyethylene, one of the most common polymer commodities, because of its low cost and wide application. In this project it was verified the possibility of making polymer materials with properties of a natural product through the incorporation of Moringa oleifera oil to recycled low density polyethylene (LDPEr) in different proportions. The films were buried for different times and their degradation was evaluated.) Samples were characterized by DSC, TGA and XRD. It was observed that samples doped with Moringa oil showed lower degradation time. (author)

  18. Evaluation of pulp and mortar to pack bitumen radioactive waste; Avaliacao de pastas e argamassas para o embalado de rejeitos radioativos betuminizados

    Energy Technology Data Exchange (ETDEWEB)

    Gregorio, Marina da S.; Vieira, Vanessa M.; Tello, Cledola C.O., E-mail: msg@cdtn.br, E-mail: vanessamotavieira@gmail.com, E-mail: tellocc@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2013-07-01

    According to international experience, for the deposition of cement in surface repository, is necessary the use of cement mortar pastes to immobilize the product. Determining the most efficient folder or for the packed mortar, as well as its ideal formulation, is the goal of this study. To do various experiments with samples of cement paste and mortar, with presence of fluxing and / or clay were performed. Viscosity, density, setting time and compressive strength were evaluated. This study will be presented only the results found in testing of compressive strength to be an essential parameter in the transport, storage and disposal of the product. From the results found will be selected the best formulations for use in packed bitumen tailings from the National Radioactive Waste Repository.

  19. Evaluation of ethanol aged PVDF: diffusion, crystallinity and dynamic mechanical thermal properties; Avaliacao do PVDF envelhecido em etanol combustivel: difusao, cristalinidade e propriedades termicas dinamico-mecanicas

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Agmar J.J.; Costa, Marysilvia F., E-mail: agmar@metalmat.ufrj.br [Coordenacao dos Programas de Pos-Graduacao em Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil)

    2015-07-01

    This work discuss firstly the effect of the ethanol fuel absorption by PVDF at 60°C through mass variation tests. A Fickian character was observed for the ethanol absorption kinetics of the aged PVDF at 60°C. In the second step, the dynamic mechanical thermal properties (E’, E’, E” and tan δ) of the PVDF were evaluated through dynamic mechanical thermal analysis (DMTA). The chemical structure of the materials was analyzed by X-ray diffraction analysis (XRD), and significant changes in the degree of crystallinity were verified after the aging. However, DMTA results showed a reduction in the storage modulus (E') of the aged PVDF, which was associated to diffusion of ethanol and swelling of the PVDF, which generated a prevailing plasticizing effect and led to reduction of its structural stiffness. (author)

  20. Exergy and thermoeconomic evaluation of hydrogen production from natural gas; Avaliacao exergetica e termo-economica da producao de hidrogenio a partir do gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Cruz, Flavio Eduardo da [PROMON Engenharia Ltda., Sao Paulo, SP (Brazil); Oliveira Junior, Silvio de [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica

    2008-07-01

    Some specific processes are required to obtain pure hydrogen and the most usual one is the natural gas reforming, where natural gas reacts with superheated steam producing H{sub 2}, CO, CO{sub 2} and H{sub 2}O. This paper presents exergy and thermoeconomic analysis of a complete hydrogen production unit of a petroleum refinery. The hydrogen production unit analysed in this paper has to supply 550,000 Nm{sup 3} of hydrogen per day to purify diesel oil. Based on a synthesis plant of the hydrogen production unit, the exergy efficiency of each component and of the overall plant are calculated. The hydrogen production cost is determined by means of a thermoeconomic analysis in which the equality cost partition method is employed, including capital and operational costs, in order to determine the production cost of hydrogen and other products of the plant.(author)

  1. Evaluation of gels obtained from acetylation of chitosan in heterogeneous medium; Avaliacao de geis obtidos a partir da acetilacao da quitosana em meio heterogeneo

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Rosangela Balaban; Silva, Dayse Luzia Pinheiro da; Costa, Marta [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Quimica]. E-mail: balaban@digi.com.br; Raffin, Fernanda Nervo [Universidade Federal do Rio Grande do Norte (UFRGN), Natal, RN (Brazil). Centro de Ciencias da Saude. Dept. de Quimica, Tecnologia Farmaceutica e de Alimentos; Ruiz, Naira Machado da Silva [Centro de Pesquisa Leopoldo A. Miguez de Mello (CENPES), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Chitosan was acetylated during 2, 5 and 10 h and physical gels were obtained at different polymer concentrations in N,N-dimethylacetamide containing 5% of LiCl. Acetylation was confirmed by infrared spectroscopy and {sup 13}C NMR, and degrees of acetylation in the range of 0.82-0.91 were determined by NMR. The O-acetylation degree (0.12-0.15) was exclusively determined by a volumetric method. Rheological studies showed that the storage modulus values were smaller for the more acetylated samples and increased with the temperature and the polymer concentration. All the gels presented storage modulus superior to loss modulus, evidencing more elastic than viscous characteristics. The results obtained in this work suggest a gelation process based on a balance between O and N-acetylation and intermolecular bonds. (author)

  2. Evaluation of environmental impacts in the mining of solid fossil fuels; Avaliacao de impactos ambientais na mineracao de combustiveis fosseis solidos

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Gilda Carneiro

    1989-07-01

    This study evaluates the environmental problems caused by the mining works of coal, peat and oil schists; also it evaluates the kind of treatment used by the mining companies against water, air and ground pollution, as well as the necessary control according to the mine activities and the affected environment. the studied areas are situated at brasilian states of Santa Catarina (Criciuma, Urussanga and Sideropolis), Rio Grande do Sul (Charqueada, Bage, Cachoeira do Sul, Butia and Arroio dos Ratos), Parana (Figueira and Sao Mateus do Sul), and Sao Paulo (Iguape and Sao Jose dos Campos). This study was done through a direct inquiry, by sending questionnaire to fifteen coal mining companies, three of peat ones and one of oil schists one. besides it was done a compilation of federal and state laws concerning to the environment and on the rights and duties of the mining companies. The information brought up in this way were compiled into a data bank, which allowed and sample surveys of environmental condition in the different industries and further it enabled a comparison between the real facts and the bibliography suggestions about adequate monitoring of the air, waters and ground, during mining activities. this analysis showed that the environment problems, created by the three former kind of mining works, are under control through projects of environment restoring and monitoring in phase of implantation and that these projects are restricted to that less expensive and easier to construct (holding back in pools or reservoirs, pouring in pits and aspersion). It was not notices a significant monitoring of parameters considered to be critical to the environment (metals, cyanides, sulphide and general bacteria). Almost all the companies have not yet exact data about the efficiency of each kind of environmental treatment because it is new ones and are just in follow-up and consequently they have not yet parameters to change the adequate the steps of the treatment, because

  3. Evaluation of commercial and sulfated ZrO{sub 2} aiming application catalysis; Avaliacao de ZrO{sub 2} comercial e sulfatada visando aplicacao em catalise

    Energy Technology Data Exchange (ETDEWEB)

    Silva, F.N.; Dantas, J.; Costa, A.C.F.M., E-mail: nilson.s@hotmail.com [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Pos-Graduacao em Engenharia de Materiais; Pallone, E.M.J.A. [Universidade de Sao Paulo (USP), Pirassununga, SP (Brazil). Departamento de Ciencias Basicas; Dutra, R.C.L. [Instituto de Aeronautica e Espaco (AQI/IAE), Sao Jose dos Campos, SP (Brazil). Divisao de Quimica

    2014-07-01

    This study evaluates the performance of commercial and sulfated ZrO{sub 2} for future application in catalysis. Commercial ZrO{sub 2} was provided by the company Saint-Gobain Zirpro. The sulfation occurred with SO{sub 4}{sup -2} ion content of 30% compared to the mass of ZrO{sub 2}. The samples were characterized by XRD, FTIR, EDX and GD. The results revealed the formation of a monoclinic phase for the commercial sample, and a monoclinic major phase with tetragonal traces for the sulfated sample. The commercial ZrO{sub 2} showed a narrow, bimodal and asymmetric agglomerates distribution, while the sulfated sample showed a narrow, tetramodal and asymmetric agglomerates distribution. The presence of traces of the tetragonal phase in the SO{sub 4}{sup -2}/ZrO{sub 2} XRD, and the presence of SO{sub 3} in the EDX were good indicators for future use in catalysis to provide ester. (author)

  4. Evaluation of a wood chipping system for eucalyptus tops for energy; Avaliacao de um sistema de cavaqueamento de ponteiras de eucalipto para aproveitamento energetico

    Energy Technology Data Exchange (ETDEWEB)

    Canto, Juliana Lorensi do [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Machado, Carlos Cardoso; Souza, Amaury Paulo de; Sant' Anna, Cleverson de Mello [Departamento de Engenharia Florestal da Universidade Federal de Vicosa, UFV, MG (Brazil)], E-mails: machado@ufv.br, amaury@ufv.br, cleverson@ufv.br; Seixas, Fernando [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Escola Superior de Agricultura Luiz de Queiroz, ESALQ], E-mail: fseixas@esalq.usp.br

    2011-11-15

    The objective of this study was to evaluate the performance and to estimate costs of a wood chipping system for tree tops, which are considered residuals from wood harvesting, to be used for energy. The study was developed in a forest industry in the Para State, located in the north region of Brazil. The system was comprised by one wood chipper, two forwarders and one front loader. Data collection was based on time study, fuel consumption and chips load weighting. System average productivity was 17.51 tonnes per effective hour. Machine utilization rate was 51.9% due to many delays, mainly for repair and maintenance of the chipper. Chips transportation was considered to be the critical point of the system, due to some lack of trucks available for blowing chips. The system can produce between 94 and 162 times more energy than the energy consumed. System cost per effective hour was R$ 376.56, which means R$ 21.51/tonne of chips or R$ 2.70/G J. (author)

  5. Magnetic resonance imaging of sella turcica: evaluation of patients with galactorrhea, amenorrhea and hyperprolactinemia; Ressonancia magnetica da sela turca: avaliacao de pacientes com galactorreia, amenorreia e hiperprolactinemia

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Alair Augusto Sarmet M.D. dos [Hospital Universitario Antonio Pedro, Niteroi, RJ (Brazil). Dept. de Radiologia; Moreira, Denise Madeira [Universidade Federal, Rio de Janeiro, RJ (Brazil). Faculdade de Medicina. Dept. de Radiologia; Andreiuolo, Pedro Angelo [Beneficencia Portuguesa de Niteroi, RJ (Brazil). Servico de Radiologia Santa Cruz Scan

    1999-08-01

    We have selected 135 cases of patients who have done magnetic resonance imaging of sella region, carried out from September, 1991 to August, 1996, who had galactorrhea (G), amenorrhea(A), and hyperprolactinemia (H), isolated or in association. The patients were divided in seven groups, according to the presence of these symptoms and signs. All examinations were made in a private clinic in the city of Rio de Janeiro, Brazil. Correlating these patients with the results of the magnetic resonance images, we found 57 micro adenomas, 31 normal examinations, 22 macro adenomas, 11 pituitary hyperplasias, 7 empty sella and 7 cases included in other aspects. The micro adenoma predominated in groups 1 (GAH), 2 (GH), 3 (HA) and 5 (H), that is, in all groups whose patients had hyperprolactinemia. In macro adenomas, a bright signal on T 1-weighted images indicates pituitary apoplexy with intratumoral hemorrhage. All in all, the magnetic resonance imaging is excellent method to be used in the evaluation of patients with changes in the hypothalamic-pituitary axis. (author)

  6. Evaluation of the repeatability of dosimetric parameters of a linear accelerator beam; Avaliacao da repetibilidade de parametros dosimetricos do feixe de um acelerador linear

    Energy Technology Data Exchange (ETDEWEB)

    Morelli, Humberto A.S.; Oliveira, Harley F. de; Silva, Maelson do N.; Pavoni, Juliana F., E-mail: h.morelli@hotmail.com [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Medicina. Servico de Radioterapia

    2016-07-01

    This study aims to evaluate the repeatability of symmetry and flatness of the photon beam of 6 MV linear accelerator Oncor Impression, Siemens, from the Radiotherapy Department of the Hospital das Clinicas da Faculdade de Medicina de Ribeirao Preto - USP. In total they were collected 102 measures, weekly, through two-dimensional detector of ionization chambers, Matrixx Evolution, IBA Dosimetry, connected to a computer with software OmniProI'mrt. The isocenter of the linear accelerator was placed in the center of the sensitive volume of the detector with solid water plates above and below these. Data were collected with 100 UM, with field size 10 x 10 cm². The flatness and symmetry values were calculated by the software used. The first measurement of this work was used as reference, the others were compared with it, taking into account the values of permissible variation for these parameters. The minimum, maximum and average value were analyzed. The literature indicates that the flatness and symmetry values should not vary by more than 2 and 3%, respectively. The results of this work show that the values of these parameters for the linear accelerator study are within the permissible variations in protocols and are therefore able to appropriate clinical use. (author)

  7. Interstitial pulmonary alterations in visceral leishmaniasis: evaluation with high-resolution computed tomography; Alteracoes pulmonares intersticiais na leishmaniose visceral: avaliacao pela tomografia computadorizada de alta resolucao

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Norma Selma Santos; Cerri, Giovanni Guido [Sao Paulo Univ., SP (Brazil). Faculdade de Medicina. Dept. de Radiologia

    1999-08-01

    Visceral leishmaniasis, also called kala-azar, is a disease caused by a protozoan, the Leishmania donovani chagasi, that comprises reticuloendothelial system with involvement of the liver, spleen and bone marrow. It is endemic in some areas of northeastern Brazil and other countries of Latin America and Africa. The pathogenesis is related to the immunologic system of patients that present with the inability to activate the phagocytosis of the macrophages. As occurs in the liver and kidneys, the lungs are also involved with interstitial abnormalities caused by Leishmania that are not dependent upon the presence of the parasite. The histopathologic changes described are the involvement of inter alveolar septal in three different phases, irregularly and diffusely throughout the whole pulmonary parenchyma. This work analyzed high-resolution computed tomography (HRCT) of the thorax in 17 patients with visceral leishmaniasis in order to detect and characterize the abnormalities described in the anatomo pathologic findings reported in the literature. The HRCT is being used to evaluate chronic interstitial lung disease in a good correlation with histologic findings. The most common findings detected by HRCT were the reticular opacities that include peribronchovascular interstitial thickening and interlobular septal thickening an ground-glass opacity. The HRCT suggests that similar changes to that found in alveolar structures may occur in the secondary pulmonary lobule and that the involvement in the parenchymal interstitium represents the findings reported by pathological studies in visceral leishmaniasis. (author)

  8. Method for evaluating natural gas demand scenarios (Demangas Project); Metodologia para avaliacao de cenarios de demanda pelo gas natural (Projeto Demangas)

    Energy Technology Data Exchange (ETDEWEB)

    Lindau, Luis Antonio [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Lab. de Sistemas de Transportes; Santos, Gilberto T. dos; Silva, Silvio C. da; Ribeiro, Jose Luis D.; Fogliatto, Flavio S. [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Lab. de Otimizacao de Produtos e Processos

    2004-07-01

    This paper presents the methodology developed for the evaluation of the existing and potential market for natural gas in the industrial, automotive, residential and commercial sectors of Rio Grande do Sul. The methodology is based upon a marketing research framework and consists of the definition of the problem; application of qualitative, quantitative and stated-preference enquiries; review of the state-of-the-art and state-of-the-practice; and, also, interviews with specialists. The methodology is consolidated in four software that enable the simulation of different demand scenarios of natural gas up to the year 2010. The development of this methodology comprised the participation of more than 1,000 potential users of natural gas and allowed the state company in charge of distributing natural gas to: structure the problem of forecasting the consumption of natural gas within a new context of competition in the energy industry; help the formulation of the strategic plan of the company with regard to investment strategies and incrementing the number of clients; and propose marketing efforts to promote the adoption of natural gas as an alternative energy source. (author)

  9. Radiometer evaluation of X-rays equipment in the region of Aracatuba, Sao Paulo, Brazil;Avaliacao radiometrica de raios-X na regiao de Aracatuba, Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Marco A.R. [UNESP, Botucatu, SP (Brazil). Faculdade de Medicina; Kanezawa, Jorge S. [Centro de Ensino e Tecnologia de Aracatuba (CETEA), SP (Brazil)

    2009-07-01

    This paper presents the basic concepts of radiation protection to guide the health care professionals who use equipment emitting ionizing radiation on the correct handling of the beams of radiation. Radiometric evaluations were conducted in 1665 in X-ray equipment, installed in dental surgeries and clinics, hospitals and radiology services, during the years 1996 to 2003 in the region of Aracatuba. Tests of radiometry are presented as a technical report where the parameters are quantified physical and radiological verifying its compliance with the established by legislation. The distribution of reports by type of unit shows that the vast majority of equipment is of periapical dental x-rays (72%), 25% of equipment is medical equipment for radiology and 3% is dental equipment panoramic model (orthodontic documentation). Among the physical parameters analyzed, the length of the browser was showing more variance compared to the required by law, this fact may also contribute to gaps in the rate of the radiation dose and the size of field in the skin of the patient, the that can easily be resolved simply to replace the piece at the outlet of the head. During the completion of visits to services, it also noted a gap in the training of professionals who operate this equipment emitting radiation, warning of the need for specific training in the area. (author)

  10. Evaluation of the efficiency of injection of polyacrylamide in different reservoir-rock samples; Avaliacao da eficiencia de injecao de poliacrilamida em diferentes amostras de rocha-reservatorio

    Energy Technology Data Exchange (ETDEWEB)

    Marcelino, Cleuton P.; Valentim, Adriano C.M.; Medeiros, Ana Catarina R. de; Girao, Joaquim H.S.; Barcia, Rosangela B. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2004-07-01

    Water soluble polymers have been used extensively in the petroleum recovery, due to their ability in increasing the viscosity of the injection water and to reduce water/oil mobility ratio and the water relative permeability in the reservoir. This reduction acts favorably as a secondary effect, and it reestablishes part of the pressure in the reservoir after the flow of the polymer, causing a correction of the injection profile in the wells through the restructuring of the resident fluids in the porous media. Nevertheless, some parameters influence the improve of this mechanism, such as petrophysics properties, chemical composition of the rock, adsorption, resistance factor and the residual resistance factor. Many paper in the area of polymers applied to the enhanced petroleum recovery indicate a high efficiency in the injection of different partially hydrolysed polyacrylamides, in different concentrations, or even in different injection conditions, as: temperature, flow, among others. In this work it was evaluated the behavior and efficiency of partially hydrolysed polyacrylamide flooding on outcrop cores from Botucatu, Rio Bonito, Clashach and Assu, using core flow tests and computer simulations. (author)

  11. Evaluation of homogeneity and dose conformity in IMRT planning in prostate radiotherapy; Avaliacao da homogeneidade e conformidade de dose em planejamentos de IMRT de prostata em radioterapia

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Juliane S.; Leidens, Matheus; Estacio, Daniela R., E-mail: juliane.lopes@pucrs.br [Hospital Sao Lucas (PUC-RS), Porto Alegre, RS (Brazil). Servico de Radioterapia; Razera, Ricardo A.Z.; Streck, Elaine E.; Silva, Ana M.M. da [Pontificia Universidade Catolica do Rio Grande do Sul (PUC-RS), Porto Alegre, RS (Brazil). Faculdade de Fisica

    2015-12-15

    The goal of this study was to evaluate the dose distribution homogeneity and conformity of radiation therapy plans of prostate cancer using IMRT. Data from 34 treatment plans of Hospital Sao Lucas of PUCRS, where those plans were executed, were retrospectively analyzed. All of them were done with 6MV X-rays from a linear accelerator CLINAC IX, and the prescription doses varied between 60 and 74 Gy. Analyses showing the homogeneity and conformity indices for the dose distribution of those plans were made. During these analyses, some comparisons with the traditional radiation therapy planning technic, the 3D-CRT, were discussed. The results showed that there is no correlation between the prescribed dose and the homogeneity and conformity indices, indicating that IMRT works very well even for higher doses. Furthermore, a comparison between the results obtained and the recommendations of ICRU 83 was carried out. It has also been observed that the indices were really close to the ideal values. 82.4% of the cases showed a difference below 5% of the ideal value for the index of conformity, and 88.2% showed a difference below 10% for the homogeneity index. Concluding, it is possible to confirm the quality of the analyzed radiation therapy plans of prostate cancer using IMRT. (author)

  12. Evaluation of testosterone serum levels in testicular interstitial fluid under thyroxine influence; Avaliacao da testosterona no fluido intersticial testicular sob influencia da tiroxina

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Isvania Maria S. da; Pereira, Simey de L.S.; Souza, Grace Mary L.; Carvalho, Elaine F.M.B.; Catanho, Maria Teresa J. de A. [Pernambuco Univ., Recife, PE (Brazil). Dept. de Biofisica e Radiobiologia; Silveira, Maria de Fatima G. da [Pernambuco Univ., Recife, PE (Brazil). Dept. de Anatomia; Lima Filho, Guilherme L. [Universidade de Pernambuco (UPE), Nazare da Mata, PE (Brazil). Faculdade de Formacao de Professores

    2000-07-01

    The thyroid hormones possibly exert a reciprocal action between testicular steroids and Sertoli's cells during the premature period. This work aims to evaluate thyroxine effect on testosterone serum levels and in the testicular interstitial fluid (TIF) in rats. Wistar males rats, 22 days old, 80g of body weight, were induced to hyperthyroidism with thyroxine (20{mu}g/kg) in periods of 5, 10, 15 and 20 consecutive days. After the treatment the animals were weighed and sacrificed for blood and testis collection. From the blood serum and from the TIF drained from the testis were performed testes in order to obtain testosterone attached to {sup 125} I with a specific activity of 36,86 MBq/ig. The results have shown a testosterone significant lineal increase in both - serum and TIF - in the group treated with thyroxine as a time function. In the control group, testosterone levels remained low in both serum and TIF dosages. As a result, we were able to verify that the testosterone levels could be modified by thyroxine in serum and TIF. And so, it could affect luteinizing hormone (LH) and follicle-stimulating hormone (FSH) levels in hypophysis. (author)

  13. A model for economic evaluation of the use of Adsorbed Natural Gas (ANG); Modelo de avaliacao economica do uso do Gas Natural Adsorvido (GNA)

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Diana C.S.; Cavalcante Junior, Celio L.; Torres, A. Eurico B.; Oliveira Junior, Jose A.; Medeiros, Vanildo M. de [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil); Campos, Flavio B.; Moura, Newton R. de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Gerencia de Gas e Energia; Campos, Michel F. [PETROBRAS, Rio de Janeiro, RJ (Brazil). Gerencia de Tecnologia de Gas e Energia; Alexandre, Francisco de Assis Souza

    2004-07-01

    Natural gas is currently transported by two main ways: through pipelines and stored in reservoirs, under compressed (CNG) or liquefied (LNG) forms. Adsorbed natural gas (ANG) is a third alternative to vessel storage, which has been intensively reported in the scientific and technical literature. Working pressures are considerably lower for ANG (3,5 MPa as compared to 25 MPa for CNG), which results in lower costs with vessel construction and compression and safer handling. The project ADSPOR, sponsored by PETROBRAS and part of the R and D portfolio of RedeGasEnergia, aims to assess the technical and economical feasibility of storing and transporting natural gas confined in carbon adsorbents. The objectives of this project are the production of high-capacity active carbons, the collection of adsorption data for NG storage and the economic evaluation of ANG. The present work presents a model for cost estimation of the ANG business, which comprises from the compression into ANG vessels until the distribution to the final costumer, taking into account several shipping modes. The variables involved in the model were: compression costs, equipment and materials technical data, costs with product handling and shipping costs for motor ways, railways and inland waterways. These variables were linked so as to generate a cost matrix that may be used to assess investment and calculate the final cost for GNA transport. The model may be used to carry out parameter sensitivity analysis, for decision-making and management purposes. (author)

  14. High performance liquid chromatography (HPLC) evaluation of carotenoids in irradiated guavas; Avaliacao por cromatografia liquida de alta eficiencia (CLAE) de carotenoides em goiabas irradiadas

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Keila S. Cople; Vital, Helio C. [Centro Tecnologico do Exercito (CTEx), Rio de Janeiro, RJ (Brazil). Secao de Defesa Nuclear]. E-mail: keilacople@ig.com.br; Lima, Antonio L. Santos; Pereira, Maria Helena G. [Centro Tecnologico do Exercito (CTEx), Rio de Janeiro, RJ (Brazil). Secao de Quimica]. E-mail: stolima@ipd.eb.br; Godoy, Ronoel L. Oliveira; Fonseca, Marcos J.O. [Embrapa Agroindustria de Alimentos, Rio de Janeiro, RJ (Brazil)]. E-mail: ronoel@ctaa.embrapa.br

    2005-07-01

    The use of ionizing gamma irradiation has shown very effective as an auxiliary technology for the decrease of post-harvest waste, grains disinfestation, pathogenic microorganisms control, increase in shelf life for meats, fruits, vegetables and bulbs and tubercles sprouts inhibition, maintaining nutritional quality. The carotenoids are pigments widely found in fruits and vegetables and are beneficial to human being health. This work was undergone using the irradiator with cesium source at the Army Technological Center, Brazil, with maximum dose rate of 2 kGy per hour. The objective is to evaluate the low gamma radiation doses (0.5, 1.0 and 1.5 kGy) influence in the total carotenoid and content lycopene in guavas CV Pal uma, with excellent weight classification. The total carotenoid content was extracted from the guava with acetone and moved to petroleum ether and determined by spectrophotometer at 450 nm. The determination of lycopene was accomplished by HPLC. The results showed that, in spite of lycopene loss with irradiation, the best dose was 0.5 kGy. (author)

  15. Electric energy deficit marginal cost: historic, evaluation and proposition of a new method; Custo marginal do deficit de energia eletrica: historico, avaliacao e proposta de uma nova metodologia

    Energy Technology Data Exchange (ETDEWEB)

    Loureiro, Paulo Gerson Cayres

    2009-05-15

    The optimization model actually used to the energy operation planning of the National Interconnected System - NIS has as objective function the minimization of expected total cost operation. To achieve this goal the model provides optimal allocation of hydrothermal resources during the study horizon, employing aggregated subsystems. The deficit marginal cost is a parameter which is explicitly informed to the model, and does a part in the operation total cost calculation being a predominant factor in the service conditions evaluation of national electric energy market, affecting the energy costs and the risk of deficit on NIS. In this work is realized an integral study about the electric energy deficit marginal cost, starting with a historical review, followed by a actualization of your actual value and a propose of a new method for the calculation of deficit marginal cost value. The studies shows the impact of the values found over service conditions to the electric energy market in the energy operation planning, focusing on some usual indicators adopted in studies of the electrical sector. (author)

  16. Evaluation of the crude oil viscosity variation in function of the demulsifiers addition; Avaliacao da variacao da viscosidade de oleo cru em funcao da adicao de desemulsificante

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Jansen M.; Lucas, Elisabete F. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Macromoleculas]. E-mail: elucas@ima.ufrj.br; Neves, Guilherme B.M. [COMAB Especialidades Quimicas Ltda., Rio de Janeiro, RJ (Brazil)]. E-mail: tecnico@comabrio.com

    2003-07-01

    One way of improving well production is the addition of demulsifier already in the gas lift. This is due to the apparent viscosity of water-in-oil emulsions being higher than apparent viscosity of crude oil, which in turn is higher than the apparent viscosity of an water-in-oil dual phase admixture and is also higher than the apparent viscosity of an oil-in-water emulsion. However, there are some situations where, in order to obtain separate flows of oil and water phases, demulsifier should be added in specific amounts in order to promote the desired phase separation. In heavy oils water and oil phase separation may be hard to obtain, however, the right demulsifier amount may imply in a considerable decrease in petroleum viscosity even without the appearance of two phases, making the flow easier. This work has evaluated the viscosity of a heavy crude having API degree 14 and BSW 52%, as a function of the addition of different amounts of DEMTROL BR 67, manufactured by Dow Quimica/Comab, Brazil, as demulsifier. (author)

  17. Evaluation of renal allografts using {sup 99m} Tc mononuclear leukocytes; Avaliacao de transplantes renais utilizando-se {sup 99m} Tc-leucocitos mononucleares

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Sergio Augusto Lopes de; Martins, Flavia Paiva Proenca; Carvalho, Antonio Carlos Pires; Gutfilen, Bianca [Universidade Federal, Rio de Janeiro, RJ (Brazil). Faculdade de Medicina. Dept. de Radiologia]. E-mail: sergioalsouza@ufrj.br; Goncalves, Renato Torres; Pontes, Daniela Salomao [Hospital Universitario Clementino Fraga Filho, Rio de Janeiro, RJ (Brazil). Servico de Nefrologia; Fonseca, Lea Mirian Barbosa da [Universidade Federal, Rio de Janeiro, RJ (Brazil). Faculdade de Medicina. Dept. de Medicina Nuclear

    2004-02-01

    Renal allograft acute rejection must be promptly diagnosed since its reversibility is related to the readiness in which treatment is initiated. The aim of this study was: to establish a quantitative method to evaluate kidney rejection and acute tubular necrosis (Attn); to assess the potential role of {sup 99m} Tc-mononuclear leukocytes scintigraphy in the diagnosis of renal rejection and differential diagnosis of Attn. One hundred and sixty studies were performed in 80 renal transplant patients at the first and fifth day after transplantation. Autologous cells were used for labeling. Images were obtained at 30 minutes, 3 hours and 24 hours after intravenous administration of 444 MBq (12 mCi) of labeled cells. There was abnormal labeled cells uptake in 27 of 31 cases of rejection and in 6 of 8 cases of Attn. The results of each patient were compared with clinical findings. Doppler scanning detected 18 of 31 cases of rejection. Rejection diagnosis sensitivity and specificity rates using scintigraphy were 87.1 per cent and 100 per cent, respectively, and 58.1 per cent and 100 per cent, respectively using ultrasound. Renal biopsy was performed in eight patients which demonstrated seven cases of rejection and one case of ATN. These results suggest that {sup 99m} Tc-mononuclear leukocytes imaging may be useful in the early diagnosis of rejection and in the differential diagnosis of ATN. (author)

  18. Hydrates removal during the exploration evaluation of the 3-SES-149A well; Remocao de hidrato na avaliacao exploratoria do poco 3-SES-149A

    Energy Technology Data Exchange (ETDEWEB)

    Barros Filho, Armando F.; Franco, Marcus L. de A. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Gomes, Luiz A.Q.M. [Schlumberger, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The 3-SES-149A well, at a water depth of 1164 meters, is part of the SEAL-100 block located offshore of the State of Sergipe. The objective of the intervention was to evaluate the 3674-3682 meters interval of the Riachuelo Formation. Bottom hole gauges and real time data transmission to the surface were deployed for this test, during which the target interval produced gas and condensate, without any evidence of formation of hydrate at the surface. After the test, while pulling out the electrical cable with the Link Running Tool, it got stuck close to the subsea well-test tree at a depth of 1257 meters. The formation of hydrate not only kept the cable from moving up, but also rendered impossible the reverse circulation in the column and consequently pulling out the test string. Removing the hydrate would allow releasing the logging cable, thus enabling fluid circulation in the string and its safe retrieval. The goal was achieved via the injection of solvent through the subsea well-test tree, drilling fluid circulation through the annulus above the BOP, and fluid circulation on the top of the hydrate plug through Coiled Tubing. The greatest challenge was running the Coiled Tubing in the string with the electrical cable inside. (author)

  19. In vivo and in vitro evaluation of dota-lanreotide radiolabelled with gallium-67; Avaliacao in vivo e in vitro do dota-lanreotideo radiomarcado com galio-67

    Energy Technology Data Exchange (ETDEWEB)

    Aldegheri, Eliane Bernardes

    2005-07-01

    One of the refinements of modern Nuclear Medicine is the capacity of providing dynamic and kinetics images of the administered radiopharmaceutical, reproducing its transport mechanism, action sites, receptor binding and excretion route. With the continues technological advances new radiopharmaceuticals have been developed in order to express higher specificity and with higher characters of affinity between receptor/complex. One radiopharmaceutical is formed by a reagent or bio molecule that has in its structure a radioisotope, that has the objectives of carrying it to the organs of affinity or to benign or malign tumoral process. Somatostatin inhibits the growing and proliferation of several tumoral cells. Somatostatin analogs bind to somatostatic receptors that are expressed in different kind of neoplasia DOTA-LANREOTIDE (DOTALAN) is an octapeptide analog to somatostatin. The interest of labeling the bio conjugate with gallium-67 in Nuclear Medicine comes from its physical, chemical and biological properties. Besides its gamma radiation, useful in the diagnosis of inflammation and infection foci, {sup 67}Ga emits Auger electrons (0.1 - 8 keV) and conversion electrons (80 - 90 keV), making it attractive to internal radiotherapy if the vectors used to lead the radionuclide to the tumoral cell are internalized. The objective of this work was to develop a methodology of labelling DOTA-LANREOTIDE with {sup 67}Ga, optimizing the labelling variables and its quality control. The novelty aspect was the comparison between labeling with national and imported {sup 67}Ga, in its original and purified forms. The purification of {sup 67}Ga was essential to reach yields higher than 90%. The radiolabelled bio conjugate peptides must be free of metallic contaminants that could compete in the labeling process. The following procedure was established after studying the labeling parameters: mass of peptide of 10 {mu}g (6nmol), pH5, final reaction volume of 170 {mu}L of the labelled

  20. Economic evaluation of organic deposition inhibition treatment: case study; Avaliacao economica de tratamentos de inibicao de deposicao organica: estudo de casos

    Energy Technology Data Exchange (ETDEWEB)

    Lechuga, Fernanda Curty; Seidl, Peter Rudolf; Guimaraes, Maria Jose de Oliveira [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Lucas, Elizabete Fernandes [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Macromoleculas

    2008-07-01

    During the production process the temperature and pressure decrease along the well, that generate an increase in viscosity, changes in the composition of the oil and chemical changes in the balance of oil. These changes in the balance may lead to precipitation and deposition of organic components of heavy oil. These occurrences cause serious economic consequences. To solve problems related to organic deposition, it is proposed some actions to prevent the formation of these deposits. Chemical additives interfere in precipitation of paraffins and aggregation of asphaltenes, increasing stability. This paper aims to examine, in economic terms, treatments prevention in different wells by the mechanism of inhibition of organic deposition by the action of chemical additives. The methodology applied for the economic analysis was the return on investment (ROI - Return-on-investments) that could estimate when there was an economic gain in problems of organic deposition treated with chemical additives. The results showed that if these wells use prevention methods it could get a return of more than $ 100.00 per dollar invested in treatment, which would be beneficial, since these treatments increase the production of oil and reduce the idle time in wells. (author)

  1. Synthesis and evaluation of phytotoxic activity of {alpha}-Santonin derivatives; Sintese e avaliacao da atividade fitotoxica de derivados da {alpha}-Santonina

    Energy Technology Data Exchange (ETDEWEB)

    Alvarenga, Elson S.; Barbosa, Luiz C.A.; Saliba, William A.; Arantes, Francisco F.P.; Demuner, Antonio J. [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Quimica]. E-mail: elson@ufv.br; Silva, Antonio A. [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Fitotecnia

    2009-07-01

    Mixtures of {alpha}-Santonin and various solvents were irradiated by either high or low pressure mercury lamps. The photochemical reactions afforded lumisantonin (11) (76% in acetonitrile), (3 S,3a S,9{beta}S)-3,6,6-trimethyl-3,3a,4,5-tetrahydronafto[1,2-b]furan-2,7({eta}6,9{beta}{eta}) dione (12) (100% in acetonitrile), 10{alpha}-acetoxy-3-oxo-1,7{alpha}H{eta},6,11{alpha}a{eta}-guaia-4-en-6,12-oli= de (8) (26% in acetic acid), 10{alpha}-hydroxy-3-oxo-1,7{alpha}a{eta},6,11{alpha}{eta}-guaia-4-en-6,12-olid= e (10) (32%) and (E)-3-((3 S,3a S,7{alpha}S)-3-methyl-2-oxo-6-(propan-2-ylidene)hexahydrobenzofuran- 7 - (7{alpha}{eta})-ylidene)propanoic acid (9) (44%) (in water/ acetic acid 1:1, v/v). Lactone 12 was also prepared by irradiation of lumisantonin in diethyl ether. Lactones 8 and 10 were converted, respectively, into the 10 {alpha}-acetoxy-3{alpha}-hydroxy-1,7{alpha}H,6,11{alpha}H-guaia-4-en-6,12-olid= e (13) (87%) and 3a,10a-dihydroxy-1,7{alpha}H,6,11{alpha}H-guaia-4-en-6,12-olide (14) (75%) by sodium borohydride reduction. The effects of the compounds on the development of radicle of Sorghum bicolor and Cucumis sativus were evaluated. (author)

  2. Evaluation of quality control tools for patients submitted to IMRT; Avaliacao das ferramentas de controle da qualidade para pacientes submetidos ao IMRT

    Energy Technology Data Exchange (ETDEWEB)

    Lavor, Milton; Rodrigues, Laura N.; Silva, Marco A., E-mail: miltonlavor@gmail.com [Universidade de Sao Paulo (HCFMRP/USP), Sao Paulo, SP (Brazil). Hospital das Clinicas. Servico de Radioterapia

    2013-04-15

    Intensity modulated radiation therapy (IMRT) is currently being implemented in a rapidly growing number of centers in Brazil. As consequence many institutions are now facing the problem of performing a comprehensive quality control program before and during the implementation of IMRT in the clinical practice. This paper proposes a methodology for quality control and presents the results and evaluations of the data obtained from the proposed methodology. Ionization chamber and two-dimensional array detector were performed in IMRT treatment planning in order to assess the absolute value of the total dose of all fields. The relative total dose distribution of all fields was measured with a radiochromic film and a two-dimensional array in a phantom. A comparison between measured and calculated dose distributions was performed using the gamma-index method, assessing the percentage of points that meet the criteria of ±3% dose difference and ±3mm distance to agreement. As a result and review of 113 tested IMRT beams using ionization chamber and 81 using two-dimensional array, the proposal was to take an action level of about ±5% compared to the treatment planning systems and measurements, for the verification of the dose in a single point at the low gradient dose region. Analysis of the two-dimensional array measurements showed that the gamma value was <1 for 97.7% of the data and for the film the gamma value was <1 for 96.6% of the data. This work can establish action levels required for quality control program proposed and implemented in the Department of Radiotherapy - Hospital das Clinicas in Sao Paulo that allows an accurate delivery of dose in 'sliding-window' IMRT with micro multi leaf collimator. (author)

  3. Technological evaluation of fuel cells using natural gas for distributed power generation; Avaliacao tecnologica da utilizacao de gas natural em celulas a combustivel para geracao distribuida de energia

    Energy Technology Data Exchange (ETDEWEB)

    Brandao, Mauricio O. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE). Programa de Engenharia Mecanica; Giannini, Marcio P.; Arouca, Mauricio C. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE). Programa de Planejamento Energetico

    2004-07-01

    The search for sustainable and more rational means of power generation motivates the scientific crew to search for more efficient and cleaner systems. Oil dependence becomes from the kind of development that the humanity had and cannot be dismissed. The question is how to use this source in a more intelligent way. Fuel Cells are electrochemical devices that convert into electric energy the chemical energy from oxi-reduction reactions between a fuel and an oxidant. The current fuel used in a Fuel Cell is hydrogen and oxygen is the oxidant. The great advantage of this device is its efficiency, higher than the one achieved with internal combustion engines. Also Fuel Cells are not limited by Carnot's efficiency. This paper is about the implementation of a distributed generation system using Fuel Cells. Technical aspects are approached together with economical and environmental needs. The already existence of Gas pipelines and the grown production of Natural Gas presented by Brazil turns it into a good market for the implementation of this energy source. The evaluation of this paper shows that is technically possible to use NG in Fuel Cells, mostly in South and Southeast regions, applying the distributed generation of energy concept. The most interesting in a strategic manner is that Brazil already have an indication that it's capable of developing this technology, opening a new market tuning with world's new technological developments. Many research centers develop this technology, not only from the cell composition itself, but also manufacturing techniques. (author)

  4. Evaluation of the normal thoracic and abdominal aorta diameters by computerized tomography; Avaliacao dos diametros normais da aorta toracica e abdominal pela tomografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Lucarelli, Claudio Luiz

    1995-07-01

    The study was undertaken to evaluate, through computerized tomography, the diameters of the normal thoracic and abdominal aorta, as well as they are connected to gender, age and body surface area; and the ratio between measurements obtained at the ascending and descending limbs of the thoracic aorta, and between the abdominal aortic diameters. For that reason, we measured the widest anteroposterior diameters of the thoracic aortas at the levels of the arch, the root, the pulmonary artery, and the thoracic-abdominal transition, as well as the level of the emergence of the superior mesenteric artery, of the renal hila and just cephalad to the bifurcation of the abdominal aortas of 350 patients without cardiovascular diseases who had undergone computerized tomography of the thorax and/or abdomen for any other reasons. Observation and statistic analyses led us to conclude that: 1) both the thoracic and abdominal aortic diameters are reduced from their proximal to their distal portions; 2) the body surface influences the size of the aorta, although only extreme variations alter the vessel's caliber; 3) vessel diameter was observed to gradually increase with age; 4) men were found to have larger diameters than age matched women; 5) the ratio between the ascending and descending aortic diameters varies according to gender and age; 6) the relations between abdominal aortic diameters measured at the level of renal hila and cephalad to the bifurcation are independent from gender and age. But the relation between those measured at the level of the superior mesenteric artery and cephalad to the bifurcation are linked to gender, but not to age. (author)

  5. Evaluation of the normal thoracic and abdominal aorta diameters by computerized tomography; Avaliacao dos diametros normais da aorta toracica e abdominal pela tomografia computadorizada

    Energy Technology Data Exchange (ETDEWEB)

    Lucarelli, Claudio Luiz

    1995-07-01

    The study was undertaken to evaluate, through computerized tomography, the diameters of the normal thoracic and abdominal aorta, as well as they are connected to gender, age and body surface area; and the ratio between measurements obtained at the ascending and descending limbs of the thoracic aorta, and between the abdominal aortic diameters. For that reason, we measured the widest anteroposterior diameters of the thoracic aortas at the levels of the arch, the root, the pulmonary artery, and the thoracic-abdominal transition, as well as the level of the emergence of the superior mesenteric artery, of the renal hila and just cephalad to the bifurcation of the abdominal aortas of 350 patients without cardiovascular diseases who had undergone computerized tomography of the thorax and/or abdomen for any other reasons. Observation and statistic analyses led us to conclude that: 1) both the thoracic and abdominal aortic diameters are reduced from their proximal to their distal portions; 2) the body surface influences the size of the aorta, although only extreme variations alter the vessel's caliber; 3) vessel diameter was observed to gradually increase with age; 4) men were found to have larger diameters than age matched women; 5) the ratio between the ascending and descending aortic diameters varies according to gender and age; 6) the relations between abdominal aortic diameters measured at the level of renal hila and cephalad to the bifurcation are independent from gender and age. But the relation between those measured at the level of the superior mesenteric artery and cephalad to the bifurcation are linked to gender, but not to age. (author)

  6. Chemometric techniques on evaluation of the flavor of irradiated orange juice concentrate; Tecnicas quimiometricas na avaliacao do sabor de aroma do suco de laranja concentrado e irradiado

    Energy Technology Data Exchange (ETDEWEB)

    Spoto, Marta Helena Fillet

    1994-12-31

    The effects of storage temperature and time on can orange juice concentrated were studied for samples irradiated at 2.5, 5.0 and 7.5 kGy doses from a gamma-ray source as well as for untreated samples. All samples were stored at 0{sup 0} C, 5{sup 0} C and 25{sup 0} C for periods of 1, 30, 60 and 90 days. The concentrated orange juice was subjected to sensorial evaluations and gas chromatographic analysis. The free profile technique was applied using eight trained panel applying the Quantitative Descriptive Analyses, using a 10 cm unstructured category scale for each attribute. Samples stored for more than one day showed a diminution in the orange attribute rating and correspondent increases in ratings for the bitterness, medicinal and cooked attributes. Storage at 0{sup 0} C and 5{sup 0} C showed smaller effects on the sweetness ratings as well as on the oily, acidic and medicinal flavor characteristics. In most cases increased radiation levels were accompanied by lower intensity of orange attribute values and higher intensity of bitter, medicinal and cooked attributes. Forty three chemical compounds were characterized. Mircene, octanal, {delta}-3-carene, limonene, citronelal, and neral were highly correlated and statistically significant correlation coefficients. All these components showed low, but 95% confidence significant level correlations with the orange attribute. On the other hand the correlated group of hexanal, octanol, oxidation products, terpinene-4-ol, cis-carveol, nerol, carvona, geraniol, perilyl alcohol and cariophilene substances can be associated the bitter, medicinal and cooked attributes of the irradiated orange juice concentrate. (author). 83 refs., 7 figs., 12 tabs.

  7. Evaluation of mechanical properties of nanocrystalline Ti-Mo-Fe-Sn alloys system; Avaliacao de propriedades mecanicas de ligas nanocristalinas do sistema Ti-Mo-Fe-Sn

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, M.O.A; Vidilli, A.L.; Afonso, C.R.M., E-mail: andre.vidilli@gmail.com [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil)

    2014-07-01

    The Ti-6Al-4V, widely used in biomaterials, exhibits elastic modulus (E) of approximately 110GPa, which is significantly higher than the one of human bone (E = 10 to 30 GPa). In this project, a process of rapid solidification was utilized in 4 different alloys of Ti-Mo-Fe-Sn, in order to produce ultrafine nanocrystalline eutectic alloys, which present high strength (1800-2500 MPa), low elastic modulus (50-110 GPa) and good corrosion resistance. The alloys Ti{sub 62}Fe{sub 30}Mo{sub 8}, Ti{sub 56}Fe{sub 30}Mo{sub 8}Sn{sub 6}, Ti{sub 63}Fe{sub 23}Mo{sub 8}Sn{sub 6}, Ti{sub 60}Fe{sub 23}Mo{sub 8}Sn{sub 9} show Vickers microhardness de, respectively, 745 (1mm), 733 (1mm), 609 (1mm) e 651(1mm) HV. The characterization was performed using scanning electron microscopy (SEM) and X- ray diffraction (XRD). The results indicated the presence of a β-Ti (bcc) matrix and the intermetallic TiFe and Ti{sub 3}Sn phases, and the microstructure were formed by dendrites, and eutectic constituents, which were present in the compositions Ti{sub 62}Fe{sub 30}Mo{sub 8}, Ti{sub 56}Fe{sub 30}Mo{sub 8}Sn{sub 6}, Ti{sub 63}Fe{sub 23}Mo{sub 8}Sn{sub 6}, Ti{sub 60}Fe{sub 23}Mo{sub 8}Sn{sub 9}. (author)

  8. Renewability emergy index calculation in the evaluation of the sustainability of a national economy; Calculo do indice de renovabillidade emergetica na avaliacao da sustentabilidade de uma economia nacional

    Energy Technology Data Exchange (ETDEWEB)

    Siche Jara, Raul Benito [Universidad Nacional de Trujillo, La Libertad (Peru). Fac. de Ciencias Agropecuarias. Escuela de Ingenieria Agroindustrial], e-mail: Siche.J.R@gmail.com; Ortega Rodriguez, Enrique [Universidade Estadual de Campinas (DEA/FEA/UNICAMP), SP (Brazil). Lab. de Engenharia Ecologica e Informatica Aplicada], e-mail: ortega@fea.unicamp.br

    2006-07-01

    In this study, the emergy methodology was used to analyze the sustainability of the Peruvian economic system. The resources (natural and not natural) and importations had been accounting in units of solar emergy using data of the Peruvian economy for the year 2004. Emergy is an energy measure based in the contribution of the resources and its influence, defined as the energy of a type required producing a flow or storage of another type. The focus of this study is the calculation of the emergy index call 'renewability' (REN), considered as a general measure of the ecological sustainability. In a long period, only systems or processes with high REN are sustainable. This index is calculated by the accounting of the resources renewed used in the economy in emergy units (2.17E+23 seJ) and divided by emergy total that enters to the economic system (6.93E+23 seJ), resulting a REN of 0.31. The renewable resources that use Peru almost represent 20% of the total of renewable resources available in the system. The great amount of renewable resources that Peru can potentially use was calculated in 11.44E+23 seJ, meaning that the system can be more sustainable if the economy is based on increasing the use of renewable resources and to diminish the use of non-renewable resources and imported resources. These data show that Peru has a relatively sustainable economy that can improve or get worse, depending of its politics in the use of resources. (author)

  9. Pipeline integrity evaluation: 10 years experience at Campos basin; Avaliacao de integridade de dutos submarinos de transferencia: 10 anos de atividades na Bacia de Campos

    Energy Technology Data Exchange (ETDEWEB)

    Bueno, Sergio Ibaje Oliveira; Franzoi, Aldo Renato [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2005-07-01

    PETROBRAS E and P department (up-stream segment) had assigned first contract for pipeline inspection using smart pigs in 1995. Up to this time only TRANSPETRO (down-stream segment) had an experience with those inspections mainly focused on first generation tools. On this contract, it was first time required high resolution tools, which had bigger defect detection capability and sizing accuracy as advantages but with higher cost. It was regarded necessary due to high costs involved on a virtual sub sea survey or repair. The investment was regarded fair as there is no way to establish correlation digs as well as normally done after on shore pipelines surveys. Actually the first internal inspection was carried out in 1997. From this period it has been realized the enormous importance on verifying all platforms installations and all procedures involving cleaning runs. We have taken many lessons from these inspections. Commissioning using all kinds of cleaning pigs (some was invented) that could be specially contracted on scaling removing jobs; diesel batch to make easy US pigs inspection, cleaning steps that should be gradual to allow receiving of debris without disturbing platforms process efficiency; special tools designed in-house to meet some specific installations requirements as limited pigability; were some issues that demanded efforts on this period. PETROBRAS/E and P through its Campos Basin Production Unit has been strongly involved on looking for solutions to keep its sub sea pipeline net integrity; a strategic asset that will guarantee the Brazilian development on oil and gas production. (author)

  10. Evaluation of the morphological alteration of the root surface radiated with a diode laser; Avaliacao da alteracao morfologica da superficie cimentaria irradiada com laser de diodo

    Energy Technology Data Exchange (ETDEWEB)

    Gulin, Mauricio

    2003-07-01

    The diode laser has been studied for periodontal therapy, as much for removal of calculus as for microbial reduction of periodontal pockets, as well as the visible analgesic effects and biomodulation capacity. For this reason the purpose of this study was to evaluate the morphological alteration of the root surface after radiation with the diode laser, 808 nm through analysis by scanning electron microscopy (SEM). Besides this, to verify the temperature variations caused during the radiation, a thermometer put into the dentinal wall of the root canal was used. In all, 18 teeth were used, 15 of which for the SEM study, and the other 3 were used to temperature variation analysis. The 25 samples were scraped on the root surface and planed with manual instruments. The other 5 were not subjected to any type of treatment. This, 6 groups of 5 samples each were formed. Control Group C whose samples had not received any treatment; Control Group C 1 was only scraped and polished conventionally with Hu-Friedy Gracey curettes 5 and 6; the other samples groups L1, L2, L3, L4 were radiated by diode laser using parameters of power 1,0 W; 1,2 W; 1,4 W; and 1,6 W respectively, 2 times for 10 seconds with 20 seconds intervals between each radiation in continuous mode. The results with relation to the increase of temperature in the interior of the root canal demonstrated that there was an increase of more than 5 degree Celsius. The results of the scanning electron microscope analysis of Control Group C demonstrated great irregularity and ridges on the root surface, with the presence of a dentine layer. Control Group C1 presented a similar aspect to Group L 1's, smoother and more homogeneous surface. Groups L2, L3, and L4 presented scratches alternating with smoother areas showing that fiber contacted the surface of the sample. The results reconfirmed the necessity of further studies using diode laser, with a beam of light emitted in an interrupted mode to improve the control of the

  11. Evaluation of the life cycle of integrated production of ethanol and biodiesel; Avaliacao do ciclo de vida da producao integrada de etanol e biodiesel

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Simone Pereira de [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)], email: sp.souza@yahoo.com.br; Pacca; Sergio Almeida [Universidade de Sao Paulo (USP), SP (Brazil). Escola de Artes, Ciencias e Humanidades], email: spacca@usp.br

    2010-07-01

    Sugarcane and palm are amongst the crops with the highest yields, which can reach 6 to 7.5 thousand liters of ethanol per hectare year and 4 to 6 metric tons of oil per hectare year, respectively. A joint production of biofuels from these crops is an interesting alternative for life cycle assessment improvement through fossil fuel and greenhouse gas emissions reduction, besides energy efficiency gains. The objective of this work is comparing the Brazilian production system sugarcane ethanol with an integrated system proposal where the ethanol and palm biodiesel are produced together. This comparative study is based on a life cycle approach using the ISO 14.044/2006 and appropriate indicators. Production systems in Cerrado, Cerradao and grassland ecosystem were considered. The energy balance, carbon balance and land use change were evaluated. The integrated system includes a 100% substitution of biodiesel by diesel, which is used in life cycle agriculture stages. Distinct fractions of sugarcane used for sugar production were assessed. When all sugarcane is sent to sugar production, ethanol is produced by molasses. The data were collected by direct observation method by questionnaire and secondary sources. Three sugarcane mills situated in Sao Paulo state and a palm mill located in Para state were surveyed. Results showed a 164% increase in energy balance for the joint production system in comparison to the traditional system. Besides this, the joint production system demonstrated a 24% GHG emission reduction. For ethanol production by molasses, the energy balance was up to 59% and 162% higher in scenarios 1 and 2, respectively, which differ each other through of the boiler that was utilized. For GHG emission, the reduction can reach 91%. The land use change identify an average ecosystem carbon payback time for Cerrado, Cerradao and Degraded Grassland of 5, 10, and -5 years, respectively. In conclusion, the joint production system of sugarcane ethanol and palm

  12. Evaluation of the morphological alteration of the root surface radiated with a diode laser; Avaliacao da alteracao morfologica da superficie cimentaria irradiada com laser de diodo

    Energy Technology Data Exchange (ETDEWEB)

    Gulin, Mauricio

    2003-07-01

    The diode laser has been studied for periodontal therapy, as much for removal of calculus as for microbial reduction of periodontal pockets, as well as the visible analgesic effects and biomodulation capacity. For this reason the purpose of this study was to evaluate the morphological alteration of the root surface after radiation with the diode laser, 808 nm through analysis by scanning electron microscopy (SEM). Besides this, to verify the temperature variations caused during the radiation, a thermometer put into the dentinal wall of the root canal was used. In all, 18 teeth were used, 15 of which for the SEM study, and the other 3 were used to temperature variation analysis. The 25 samples were scraped on the root surface and planed with manual instruments. The other 5 were not subjected to any type of treatment. This, 6 groups of 5 samples each were formed. Control Group C whose samples had not received any treatment; Control Group C 1 was only scraped and polished conventionally with Hu-Friedy Gracey curettes 5 and 6; the other samples groups L1, L2, L3, L4 were radiated by diode laser using parameters of power 1,0 W; 1,2 W; 1,4 W; and 1,6 W respectively, 2 times for 10 seconds with 20 seconds intervals between each radiation in continuous mode. The results with relation to the increase of temperature in the interior of the root canal demonstrated that there was an increase of more than 5 degree Celsius. The results of the scanning electron microscope analysis of Control Group C demonstrated great irregularity and ridges on the root surface, with the presence of a dentine layer. Control Group C1 presented a similar aspect to Group L 1's, smoother and more homogeneous surface. Groups L2, L3, and L4 presented scratches alternating with smoother areas showing that fiber contacted the surface of the sample. The results reconfirmed the necessity of further studies using diode laser, with a beam of light emitted in an interrupted mode to improve the control of

  13. Properties of altered soils by alkaline solution: contribution in the performance evaluation of repositories; Propriedades de solos alterados por solucao alcalina: contribuicao na avaliacao de desempenho de repositorios

    Energy Technology Data Exchange (ETDEWEB)

    Calabria, Jaqueline Alves de Almeida

    2015-07-01

    very low for all evaluated samples (less than 20% after 10 days of equilibrium), being the best performance one, the nitosoil sample whose K{sub d} values varied from 11.78 to 63.05 mL.g{sup -1}. In a subsequent step, the clay soil, was submitted to the alkaline solution interaction, in order to investigate possible alterations on the sorption properties and hydraulic conductivity of this soil. Using the sorption parameters, obtained from data fitted isotherms, the retardation factor, R, was estimated for the samples before and after the interaction. It was demonstrated that the alkaline alteration promotes damages to sorption properties of Cs, once the R became significantly smaller (about 1000 times) after the interaction. The hydraulic conductivity in turn increased slightly (3,91x10{sup -8} cm.s{sup -1} to 5,08 x 10{sup -8} cm.s{sup -1}). It was concluded that these changes were due, mainly, to the dissolution of minerals present in the clay soil (kaolinite and quartz), associated with the incorporation of K and Ca from the alkaline solution, resulting, probably, in the formation of hydrated calcium silicate phases. Additionally, the effects of alkaline solution on the properties of a commercial bentonite were studied. Contrary to the clay soil, it was observed a gain in the sorption characteristics, with K{sub d} (Cs) increasing from 760.05 mL.g{sup -1}to 1311.80 mL.g{sup -1}and Q{sub max} from 36.32 mg.g{sup -1}to 52.13 mg.g{sup -1}, with the corresponding increase in the retardation coefficient, R. The dissolution of the clay minerals from the initial sample and the incorporation of Mg, K e Ca coming from the alkaline solution, generating smectite of different kinds, were considered as the main mineralogical changes responsible for the modifications in sorption parameters. The different behavior between the two evaluated samples, soil and bentonite, confirms that the nature and extension of changes observed, when mineral samples interact with alkaline solution

  14. Chemical treatment and biomimetic coating evaluating in zirconia-alumina ceramics; Avaliacao de tratamentos quimicos e recobrimento biomimetico em ceramicas de alumina-zirconia

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, Amanda Abati

    2007-07-01

    Ceramic materials, as alumina and zirconia have been explored along the years as biomaterials application. The bio inert nature has been stimulating the development of new alternatives, as chemical treatments to improve the biological application of these ceramics. The biomimetic process of bio inert ceramics for coating apatite is based on soaking the implant in a simulated body fluid, SBF, with ion concentrations nearly equal to those of human blood plasma. The bioactivity of the material is related with the formation of a layer constituted of hydroxyapatite low crystalline, similar to the biological apatite. The biocompatibility associated to the structural properties of the alumina and zirconia has been stimulating the clinical use of these materials, mainly in areas of larger mechanical requests, places not recommended for bioactive hydroxyapatite, for instance. In this work samples of alumina, zirconia doped with Yttria (3% mol) and composites of alumina and zirconia doped with Yttria (3% mol) were prepared by co-precipitation method, calcinate, sintered, chemically treated with solutions of acid phosphoric and sodium hydroxide and them immersed in 1.0 M and 1.5 M SBF. The calcinate powders were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), gas adsorption (BET) and laser diffraction. The XRD results indicate that the samples are low crystalline. It was observed for BET that the samples present high specific surface area. The results of laser diffraction and SEM showed that the powders are agglomerates. The sintered samples were analyzed by XRD, SEM and X-ray fluorescence (XRF). The phases quantified by Rietveld method were: cubic, tetragonal and monoclinic of the zirconia, besides the phase alpha of the alumina. The chemical treatment with phosphoric acid didn't present a tendency of larger apatite formation in relation to the samples no chemically treated. The treatment with sodium hydroxide provoked accentuated transformation

  15. Evaluation of mobility potential of {sup 90}Sr in Brazilian soils; Avaliacao do potencial de mobilidade do {sup 90}Sr em solos brasileiros

    Energy Technology Data Exchange (ETDEWEB)

    Viana, Aline Gonzalez

    2007-07-01

    In this document, the transfer mechanisms of {sup 90}Sr were studied in soil-plant systems from Brazil, integrating field and laboratory experiments. Some soil classes, with different physical and chemical properties, relevant to Brazil were selected. The soil classes included in this study were Oxisol, Alfisol and Nitisol. These soils were artificially contaminated with {sup 90}Sr for crop cultivation in lysimeters located at the experimental area of the Instituto de Radioprotecao e Dosimetria. The selected crops chosen to the root uptake studies were: corn (Zea mays, L.), cabbage (Brassica oleracea) and radish (Raphanus sativus L.). These cultures were chosen because they have varying absorption rates due to differences in the physiologic structures analyzed: grain, leaf and root. This study identified Nitisol, which contains clay of high activity, as having smaller transfer factor for all crops and these values were in the same order of magnitude as temperate climate values reported in the specialized literature: FT{sub corn}: 5,78E-3 (n=2); FT{sub radish}: 1,78 E0 (n=2); FT {sub cabbage}: 9,16E-1 (n=2). All other soils presented higher TF values, ranging from 1,93E0 to 4,06 E + 01 for radish (n=8), from 9,99 E-2 to 8,80 E0 for cabbage (n=16) and from 9,94 E-3 to 1,60 E-2 for corn (n=14). It was verified that the TF values for corn presented a significant linear correlation with the following properties of the soils: exchangeable Ca and Mg, Cation Exchange Capacity and Organic matter content (p=99,9%), corroborating the behavior described in the related literature. The TF values for cabbage presented significant correlation with exchangeable Ca and pH (p=99,9%), while no correlation between TF and soil properties where observed for radish. The results of sequential extraction evidenced the great {sup 90}Sr availability for transfer in the soil-plant system; nevertheless, physiological processes occurring in such unfertile soils (low CEC, low pH and low OM and

  16. Process business risk: a methodology for assessing and mitigating the financial impact of process plant accidents; Avaliacao de risco ao negocio devido a acidentes de processo em plantas industriais

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, Ana Cristina C.; Bardy, Mariana B. [Det Norske Veritas (Brazil)

    2008-07-01

    Traditional risk management has focused on effects on people, particularly when using Quantitative Risk Assessment (QRA). A much broader approach is being adopted nowadays, with companies beginning to consider potential accidental losses in their decision making process. This paper describes a study where business risks from major accident hazards were assessed for a large petrochemical plant. The results are presented as F-Cost curves, which are similar to traditional F-N curves, but represent cumulative frequencies of events versus their cost, instead of fatalities. A different variety of costs can be evaluated as property damage, business interruption, inventory loss, environmental loss, clean-up costs, legal costs, fatality and injury costs, amongst others. As final objective of the study insurance values can be adjusted as well as decisions on reducing risk can be made based on the actual benefit, considering the reduction of losses and the amount to be spent on mitigating major risks. Also, values for civil liability insurance can be reviewed, based on the hazards that can result in fatalities and injuries, as well as property losses, for third parties. This paper presents the results of a study which involved the evaluation of the company's civil liability. The key driver was to consider a more accurate value for the company insurance policy, considering the different losses that major accident can lead on for a community and industries located nearby a petrochemical plant. The results of the analysis are presented as F-Cost curves and we describe the risk-based decision making process and criteria adopted by the company to set the maximum loss value to be insured for civil liability. In conclusion, this paper presents results from a real life example of the application of the quantitative evaluation of business risks, illustrating that a financial or business risk approach can help management in day-to-day decisions when considering possible effects of

  17. Exergy Evaluation of Desalination Processes

    Directory of Open Access Journals (Sweden)

    Veera Gnaneswar Gude

    2018-06-01

    Full Text Available Desalination of sea or brackish water sources to provide clean water supplies has now become a feasible option around the world. Escalating global populations have caused the surge of desalination applications. Desalination processes are energy intensive which results in a significant energy portfolio and associated environmental pollution for many communities. Both electrical and heat energy required for desalination processes have been reduced significantly over the recent years. However, the energy demands are still high and are expected to grow sharply with increasing population. Desalination technologies utilize various forms of energy to produce freshwater. While the process efficiency can be reported by the first law of thermodynamic analysis, this is not a true measure of the process performance as it does not account for all losses of energy. Accordingly, the second law of thermodynamics has been more useful to evaluate the performance of desalination systems. The second law of thermodynamics (exergy analysis accounts for the available forms of energy in the process streams and energy sources with a reference environment and identifies the major losses of exergy destruction. This aids in developing efficient desalination processes by eliminating the hidden losses. This paper elaborates on exergy analysis of desalination processes to evaluate the thermodynamic efficiency of major components and process streams and identifies suitable operating conditions to minimize exergy destruction. Well-established MSF, MED, MED-TVC, RO, solar distillation, and membrane distillation technologies were discussed with case studies to illustrate the exergy performances.

  18. 15 CFR 286.7 - Evaluation process.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Evaluation process. 286.7 Section 286... VOLUNTARY CONFORMITY ASSESSMENT SYSTEM EVALUATION (NVCASE) PROGRAM § 286.7 Evaluation process. (a) Each applicant requesting to be evaluated under NVCASE is expected to initiate the process and assume designated...

  19. 76 FR 30696 - Technology Evaluation Process

    Science.gov (United States)

    2011-05-26

    ...-NOA-0039] Technology Evaluation Process AGENCY: Office of Energy Efficiency and Renewable Energy... (DOE) seeks comments and information related to a commercial buildings technology evaluation process... evaluation efforts. The goal of creating this standard process is to evaluate energy-saving technologies in a...

  20. Evaluation of toxicity to the biological treatment and removal of recalcitrant organic compounds from oil refineries wastewaters; Avaliacao da toxicidade ao tratamento biologico e remocao de compostos organicos recalcitrantes existentes em efluentes de refinarias de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Barros Junior, Laerte M.; Macedo, Gorete R.; Bezerra, Marcio S.; Pereira, Franklin M.S. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Engenharia Quimica; Schmidell, Willibaldo [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil)

    2004-07-01

    Oil industry waste water usually contains recalcitrant chemical compounds, like phenol, benzene, toluene, xylene, naphthalene and acenaphthene. The respirometry, determination of respiration rate of an active biomass, is an adequate methodology for quantification of aerobic activity biological. This study aims evaluate the inhibition effect of phenol in the oxidation capacity of an industrial sludge. This work also intends to study the phenol removal through biological and photochemical-biological processes. The respirometry was carried out with synthetic solution, using sludge from an oil processing industry. The phenol degradation experiments were carried out in an activated sludge unit and in a photochemical reactor. This work suggests the potential of photochemical-biological treatment use, in relation to the biological process with a no-acclimated sludge, in the removal of refractory organic compounds from oil industry wastewaters. The characterization of biomass using the respirometry methodology showed which is a useful tool in evaluation of phenol toxicity to biological treatment. (author)

  1. 76 FR 37344 - Technology Evaluation Process

    Science.gov (United States)

    2011-06-27

    ...-NOA-0039] Technology Evaluation Process AGENCY: Office of Energy Efficiency and Renewable Energy... seeks comments and information related to a commercial buildings technology evaluation process. DOE is seeking to create a process for evaluating emerging and underutilized energy efficient technologies for...

  2. Issues evaluation process at Rocky Flats Plant

    International Nuclear Information System (INIS)

    Smith, L.C.

    1992-01-01

    This report describes the issues evaluation process for Rocky Flats Plant as established in July 1990. The issues evaluation process was initiated February 27, 1990 with a Charter and Process Overview for short-term implementation. The purpose of the process was to determine the projects required for completion before the Phased Resumption of Plutonium Operations. To determine which projects were required, the issues evaluation process and emphasized risk mitigation, based on a ranking system. The purpose of this report is to document the early design of the issues evaluation process to record the methodologies used that continue as the basis for the ongoing Issues Management Program at Rocky Flats Plant

  3. Social environmental and economic evaluation diagnosis through application of MADSA (Social and Environmental Evaluation Matrix) customization; Diagnostico de desempenho socioambiental e economico por meio da customizacao da MADSA (Matriz para Avaliacao de Desempenho Socioambiental)

    Energy Technology Data Exchange (ETDEWEB)

    Ziliotto, Marco Aurelio B.; Villa, Alessandra T.; Padilha, Simone L. Vieira; Canaverde, Patricia Margue [Instituto ECOPLAN, General Carneiro, PR (Brazil); Sanqueta, Carlos Roberto [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil)

    2004-07-01

    The present paper reports a social, environment and economic diagnosis in an oil and energy organization, in the enlargement of its plant. Attending to some previous requirements made by this company, the diagnosis was accomplished making use of an innovative evaluation tool called MADSA{sup R} (Social and Environmental Evaluation Matrix). Through the customization of this tool, it was possible to evaluate, systematically, the performance of the engaged companies hired by the organization to implement its enterprise, based on proposed actions in QSMS - Quality, Safety, Environment and Health. The performance evaluation was supported by the employees', the organization, its clients' and the local community perception. MADSA{sup R} methodology made it possible to measure the accomplished gain through proposed actions. The development of a performance indicator allowed the comparison between achieved results and accomplished investments. It was concluded that MADSA{sup R} provided subsidies to elaborate an action plan to improve the organization achievements, since it was able to represent the strategy of the organization, to guide and standardize actions, to identify and quantify points to be made better of. (author)

  4. Evaluation of work routines in PET/CT service with and individual tool in real time; Avaliacao das rotinas de trabalho em servico de PET/CT com ferramenta de monitoracao individual em tempo real

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Maryana N.; Oliveira, Fernanda R. de; Fischer, Andreia C.F.S.; Bacelar, Alexandre [Servico de Fisica Medica e Radioprotecao, Hospital de Clinicas de Porto Alegre, RS (Brazil)

    2016-07-01

    This study used a direct monitoring system (RemoteDose) that presents the individual dose and dose rate measurements, plotted instantly, as a tool to evaluate work routines of Individuals Occupationally Exposed (IOE) of a PET/CT Service. With this evaluation was possible to identify the critical tasks performed by each work team (Pharmaceutical/Nursing/Radiology Technician team) for subsequent optimization of patient care processes. It was also possible to assess whether these tasks are properly distributed among this teams. The RemoteDose system proved to be able to assist the optimization of radiation protection of a PET/CT Service, proving to be an important ally of the Radiation Protection Supervisor in this process, since it allows the display of real-time monitoring. (author)

  5. Evaluating Knowledge of Business Processes

    Directory of Open Access Journals (Sweden)

    Andra TURDASAN

    2016-01-01

    Full Text Available Any organization relies on processes/procedures in order to organize the operations. Those processes can be explicit (e.g. textual descriptions of workflow steps or graphical descriptions or implicit (e.g. employees have learned by experience the steps needed to ‘get things done’. A widely acknowledged fact is that processes change due to internal and/or external factors. How can managers make sure the employees know the last version of the process? The current practice is to test employees by multiple-choice questions. This paper proposes a novel knowledge-testing approach based on graphical and interactive questions. To validate our approach, we set up a single-factor controlled experiment with novices and experts in a faculty admission process. The results show that our approach has better results in terms of correct answers.

  6. Evaluation of the modified nanoclay effect on the vulcanization of SBR through rheometric curve and DSC;Avaliacao do efeito de nanoargila modificada na vulcanizacao de SBR atraves da curva reometrica e DSC

    Energy Technology Data Exchange (ETDEWEB)

    Forte, Maria Madalena C.; Brito, Karin J.S., E-mail: mmcforte@ufrgs.b [Universidade Federal do Rio Grande do Sul (PPGEM/UFRGS), Porto Alegre, RS (Brazil). Programa de Pos-Graduacao em Engenharia Mecanica; Gheller Junior, Jordao [SENAI, Sao Leopoldo, RS (Brazil). Centro Tecnologico de Polimeros

    2009-07-01

    Rubber nanocomposites with nanoclays organically modified by quaternary ammonium salts may have the curing features modified significantly, since the salts may act on the rubber cure system. The aim of this work is to evaluate the influences of an organically modified montmorillonite (OMMT) on the curing reaction of an SBR (styrene butadiene rubber) with sulfur. The SBR/OMMT nanocomposites were prepared by co-coagulating SBR latex and Cloisite{sup R} 20A aqueous suspension at different nanoclay concentrations. The OMMT effect on the sulfur curing reaction was evaluated by the rheometric curve using a rheometer type RPA (Rubber Process Analyzer) and the heat of vulcanization (DELTAH{sub v}) using Differential Scanning Calorimetry (DSC). The evaluation of the clay nanolayers dispersion in the SBR matrix was accomplished by x-ray diffraction (XRD) analysis. (author)

  7. Offshore degasser vessel capacity versus performance qualitative evaluation for waste water treatment; Avaliacao qualitativa da capacidade versus desempenho de vaso degaseificador em plataformas offshore visando tratamento de agua produzida para descarte

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Marcel V.; Pereira Junior, Oswaldo de A. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Silva, Daniel B.V.F. [Engineering Simulation and Scientific Software (ESSS), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Present work shows a qualitative evaluation of an offshore degasser vessel aiming the improvement of the water processing plant capacity. For such computational fluid dynamics (CFD) allowed the analysis of the flow pattern inside the vessel for different operational flow rates and internal geometries. This vessel is responsible for the process of water final polishing to be disposed into the sea. Original capacity of the vessel is 13.308 m{sup 3}/d, but after some changes in the outlet section, the processing capacity increased to 24.000 m{sup 3}/d, without changing its separation efficiency. However, as newer production predictions state that the new processing capacity should be increased to 26.000 m{sup 3}/d, there is some uncertainty on how would be this vessel behaviour, given the new operational condition. CFD analysis will be used to evaluate the flow characteristics inside the vessel (residence time distribution), therefore providing information on the separation performance for each one of the specified conditions and internal modifications. (author)

  8. Dry Process Fuel Performance Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Myung Seung; Song, K. C.; Moon, J. S. and others

    2005-04-15

    The objective of the project is to establish the performance evaluation system of DUPIC fuel during the Phase II R and D. In order to fulfil this objectives, irradiation test of DUPIC fuel was carried out in HANARO using the non-instrumented and SPND-instrumented rig. Also, the analysis on the in-reactor behavior analysis of DUPIC fuel, out-pile test using simulated DUPIC fuel as well as performance and integrity assessment in a commercial reactor were performed during this Phase. The R and D results of the Phase II are summarized as follows : - Performance evaluation of DUPIC fuel via irradiation test in HANARO - Post irradiation examination of irradiated fuel and performance analysis - Development of DUPIC fuel performance code (modified ELESTRES) considering material properties of DUPIC fuel - Irradiation behavior and integrity assessment under the design power envelope of DUPIC fuel - Foundamental technology development of thermal/mechanical performance evaluation using ANSYS (FEM package)

  9. Dry Process Fuel Performance Evaluation

    International Nuclear Information System (INIS)

    Yang, Myung Seung; Song, K. C.; Moon, J. S. and others

    2005-04-01

    The objective of the project is to establish the performance evaluation system of DUPIC fuel during the Phase II R and D. In order to fulfil this objectives, irradiation test of DUPIC fuel was carried out in HANARO using the non-instrumented and SPND-instrumented rig. Also, the analysis on the in-reactor behavior analysis of DUPIC fuel, out-pile test using simulated DUPIC fuel as well as performance and integrity assessment in a commercial reactor were performed during this Phase. The R and D results of the Phase II are summarized as follows : - Performance evaluation of DUPIC fuel via irradiation test in HANARO - Post irradiation examination of irradiated fuel and performance analysis - Development of DUPIC fuel performance code (modified ELESTRES) considering material properties of DUPIC fuel - Irradiation behavior and integrity assessment under the design power envelope of DUPIC fuel - Foundamental technology development of thermal/mechanical performance evaluation using ANSYS (FEM package)

  10. Evaluation and processing of covariance data

    International Nuclear Information System (INIS)

    Wagner, M.

    1993-01-01

    These proceedings of a specialists'meeting on evaluation and processing of covariance data is divided into 4 parts bearing on: part 1- Needs for evaluated covariance data (2 Papers), part 2- generation of covariance data (15 Papers), part 3- Processing of covariance files (2 Papers), part 4-Experience in the use of evaluated covariance data (2 Papers)

  11. 7 CFR 4284.512 - Evaluation process.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Evaluation process. 4284.512 Section 4284.512 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND....512 Evaluation process. (a) Applications will be evaluated by qualified reviewers appointed by the...

  12. 7 CFR 4284.912 - Evaluation process.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Evaluation process. 4284.912 Section 4284.912 Agriculture Regulations of the Department of Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND... Evaluation process. (a) Applications will be evaluated by agricultural economists or other technical experts...

  13. Evaluation of rheological behavior and sensory properties of ready to eat salad dressings submitted to irradiation; Avaliacao do comportamento reologico e das propriedades sensoriais de molhos comerciais para salada tratados por irradiacao

    Energy Technology Data Exchange (ETDEWEB)

    Gallo, Juliana Maria Altavista Sagretti

    2013-08-01

    This study evaluated the rheological behavior of 11 salad dressings ready to eat, processed by gamma irradiation, at doses: 3 kGy and 5 kGy. This assessment was made by rheograms traced by measurements of viscosity and shear stress by shear rate. Mathematical parameters obtained from these measures also contributed to the conclusion of the behavior exhibited and for choosing the best mathematical model applicable to them. The measurements were performed on a Brookfield viscometer Model LVDV - III. The Neslab thermal bath was used to maintain ambient temperature during the whole analysis. This study protocol was done in two stages. In step 1, the evaluation was performed soon after the samples have been irradiated when these were close to their dates of manufacture. In phase 2 the samples were reassessed after a period of storage, near the expiration date of their validity. Simultaneously pH measurement was performed to evaluate their stability in the face of treatment and sensory analyzes of two salad dressings were studied, in order to verify the acceptance of these when submitted to irradiation. The shear-thinning behavior was confirmed for all dressings through the mathematical model, the power law, that best model apply to this, in both phases. The irradiation at the absorbed doses studied did not influence this behavior. The results of sensory evaluation indicated good acceptance of irradiated sauces for the tasters. (author)

  14. Balanced evaluation of energy systems: development of an integration model between use and energy generation; Avaliacao balanceada de sistemas energeticos: desenvolvimento de um modelo de integracao entre uso e geracao de energia

    Energy Technology Data Exchange (ETDEWEB)

    Marins, Karin Regina de Castro [Universidade do Estado de Sao Paulo, SP (Brazil). Faculdade de Arquitetura e Urbanismo]. E-mail: kmarins@gmail.com

    2006-07-01

    The present theme treats of urban and environment planning through an integrated approach. Developed as master of science dissertation, the project included the development of a balanced evaluation of energy systems, having in mind the efficient, potentialize initiatives of both sides. In the system of 'Energy use' strategies for energy efficiency in residential and commercial buildings from urban, architecture solutions were included. In {sup e}nergy generation{sup ,} urban centralized systems and distributed generation systems were included. Electricity, environmental heating and refrigeration were considered, excepting peaks in the daily consumption. The model involve quantitative evaluation modules and graphical interfaces, giving support to development of project and decision making processes, demonstrating the advantages of the integrated approach.

  15. Dose evaluation due to the effluent liberation by medical installations at city of Rio de Janeiro, Brazil; Avaliacao de doses devido a liberacao de efluentes por instalacoes medicas na cidade do Rio de Janeiro

    Energy Technology Data Exchange (ETDEWEB)

    Shu, Jane; Rochedo, Elaine R.R., E-mail: jshu@cnen.gov.b, E-mail: erochedo@cnen.gov.b [Comissao Nacional de Energia Nuclear (CODIN/CNEN), Rio de Janeiro, RJ (Brazil). Coordenacao de Instalacoes Nucleares; Heilbron, Paulo F.L., E-mail: paulo@cnen.gov.b [Comissao Nacional de Energia Nuclear (COREJ/CNEN), Rio de Janeiro, RJ (Brazil). Coordenacao de Rejeitos; Crispim, Verginia R., E-mail: verginia@con.ufrj.b [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear

    2011-10-26

    This paper, the city of Rio de Janeiro was taken as a case study. It was processed deterministic and probabilistic simulations vor evaluation of the dose in two exposure sceneries, one of them referring to public members exposure and the other relative to exposure of sewage sanitary treatment plant workers. The results showed that at present the doses for inhabitants of the city and operators of treatment station are lower to dose limit established for the public, the approach presently in use in Brazil is not sufficient to accomplish whit international requirements and the regulation should be revised to be adopted specific values for each radionuclide

  16. Evaluation of doses from radiodiagnostic procedures performed in veterinary medicine and assessing of the doses of secondary radiation in the medical staff and animal owners; Avaliacao das doses resultantes de procedimentos radiodiagnosticos realizados em medicina veterinaria e avaliacao das doses secundarias de radiacao espalhada no corpo clinico e nos proprietarios dos animais

    Energy Technology Data Exchange (ETDEWEB)

    Veneziani, Glauco Rogerio

    2012-07-01

    The primary goal in veterinary radiography is to produce radiographs of diagnostic quality on the first attempt. This goal serves three purposes: (1) to decrease radiation exposure to the patient and veterinary personnel; (2) to decrease the cost of the study for the client; and (3) to produce diagnostic data for rapid interpretation and treatment of the patient. This work aimed to determine the doses in dogs submitted to chest and abdomen X rays using the technique of thermoluminescence (TL) dosimetry. The radiation doses were assessed using thermoluminescent dosimeters of calcium sulphate doped with dysprosium (CaSO{sub 4}:Dy) and lithium fluoride doped with magnesium and titanium (LiF:Mg,Ti). The obtained results indicate that is extremely important the assessment of radiation doses involved in veterinary diagnostic radiology procedures, to evaluate the delivered doses to the animals, to be used as a parameter in the individual monitoring of pet's owners, who assist the animal positioning, and to protect occupationally exposed workers at the Veterinary Radiology Clinics. (author)

  17. Evaluation of the effects resulting from the application of magnetic fields on the properties of crude oils and paraffins; Avaliacao da influencia da aplicacao de campos magneticos sobre as propriedades de petroleo e parafinas

    Energy Technology Data Exchange (ETDEWEB)

    Vieira, Lenise Couto; Rocha, Nelson de Oliveira; Dittz, Carlos Henrique da Silva [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Setor de Tecnologia de Processamento e Transporte

    2000-03-01

    In petroleum industry the phenomenon of build-up of organic deposits, basically of paraffinic nature, into surface equipment, flow lines and columns has been one of the greatest problems concerning the production and transfer of crude oils, leading to significant and increasing losses in production. The approach through the application of magnetic field is a novel technique, neither explained nor exploited altogether, not one that turns out to be a simple preventive solution for the problem requiring low investment and showing expressive benefits, provided its effectiveness is confirmed. The main results of laboratory test where the effects of application of magnetic fields on the properties of two crude oil types, one mixture of paraffins and two reference solution were evaluated are presented herein, and this paper also approaches the influence of process variables (Magnetization temperature, exposure time and magnetic field density) on the efficiency of this process of treatment. (author)

  18. Technical evaluation of biomass gasification technology integrated with combined cycle using bagasse as fuel; Avaliacao tecnica da tecnologia de gaseificacao de biomassa integrada a ciclos combinados utilizando bagaco como combustivel

    Energy Technology Data Exchange (ETDEWEB)

    Ortiz, Pablo Silva; Venturini, Osvaldo Jose; Lora, Electo Silva [Universidade Federal de Itajuba (NEST/UNIFEI), MG (Brazil). Nucleo de Excelencia em Geracao Termeletrica e Distribuida], email: pablo.silvaortiz@gmail.com; Campo, Andres Perez [Universidade Automona de Bucaramanga (UNAB) (Colombia). Fac. de Engenharia Fisico- Mecanica, Engenharia em Energia

    2010-07-01

    Biomass Integrated Gasification Combined Cycle (BIGCC) was identified as an advanced technology with potential to be competitive for electricity generation. The BIGCC technology uses biomass and the sub products of some industrial sectors processing, like sugar cane, as feedstock. The current Brazilian energy matrix is mainly based on renewable generation sources, making it important to assess these gasification technologies in the production of sugar, ethanol and electricity. In this work, a technical evaluation of the technologies incorporated in BIGCC power plants is done: the gasification process and the combined cycle power plant. On the other hand, the generated costs of these systems are analyzed, and the potential for implementation in Brazil plants from sugar cane bagasse is studied, in which a 10% increase in efficiency is obtained. (author)

  19. Microstructural evaluation of a low carbon steel submitted to boriding treatment pre and post GTAW welding; Avaliacao microestrutural de um aco de baixo carbono submetido ao tratamento de boretacao pre e pos-soldagem GTAW

    Energy Technology Data Exchange (ETDEWEB)

    Pollnow, Edilson Nunes; Osorio, Alice Goncalves, E-mail: edilson.pollnow@hotmail.com, E-mail: osorio.alice@gmail.com [Universidade Federal de Pelotas (CDTec/UFPel), Pelotas, RS (Brazil). Centro de Desenvolvimento Tecnologico; Araujo, Douglas Bezerra de, E-mail: dbaraujo@ufu.br [Universidade Federal de Uberlandia (FEMEC/UFU), Uberlandia, MG (Brazil). Faculdade de Engenharia Mecanica; Passos, Thais Andrezza dos; Souza, Daniel, E-mail: thais.andrezza.passos@gmail.com, E-mail: danielsouza@furg.br [Universidade Federal do Rio Grande (EE/FURG), Rio Grande, RS (Brazil). Escola de Engenharia

    2017-04-15

    Studies on surface engineering area are given great importance due to the improvement that surface modifications provide to materials. With a global market that has the need to provide parts and equipment with extended service life and low cost, to support stringent requests and thus maintain its high performance, surface treatments may bring what was impossible into reality. Among the surface treatments that have received attention recently, we have the thermochemical process of boriding. The boriding process consists of saturate the surface of steels and metal alloys with boron. This saturation provides an increase in the surface properties not inherent to the base metal, such as hardness, resistance to abrasion and corrosion. Although the properties of boriding steels have already been studied, the effects that the boriding process perform on the steel during or after the welding processes are not known. Hence, it is the purpose of this study to evaluate the microstructure of a low carbon steel treated with boriding before and after GTAW welding. The results indicated poor metallurgical weldability of low carbon steel with boride layer, with the presence of solidification cracks. Nonetheless, the steel welded previous to boring treatment presented a more ductile nucleus, with harder surface. Although the values of hardness within the nucleus of the steel had dropped drastically at the welded zone after the boring, the surface of this steel showed higher values of hardness due to the boriding layer. This fact should be considered when applications where wear resistance is needed. (author)

  20. Evaluation of the Acquisition Audit Process

    National Research Council Canada - National Science Library

    Smolenyak, Barbara

    1997-01-01

    The objectives were to evaluate the efficiency and effectiveness of the acquisition audit process, determine whether reductions can be achieved by improvements in prioritizing audits, and determine...

  1. Evaluation of Geo-processes

    DEFF Research Database (Denmark)

    Singh, Ashok

    2013-01-01

    and salinity counteracts this effect. Changes of rock properties observed comprise an increase in porosity, permeability, water binding capacity, rock wettability and a slight decrease in residual gas saturation. The recent stress field was determined by direct measurement of the effective primary principal...... strata, calculated from the obtained effective primary stresses, are expected to be modified with a pilot injection into the reservoir. Methods and numerical tools were developed, which are dedicated to the numerical characterisation of the nearly depleted gas reservoir as well as to the simulation...... of the processes during CO2 injection and migration storage. The only practical option for predicting the long-term behaviour of CO2 in reservoirs is numerical analysis, supported by the understanding gained from the relatively short-term laboratory and field-scale experiments. Corresponding to the real site...

  2. Feasibility evaluation of using spent FCC catalyst for metals treatment from industrial waste; Avaliacao do potencial de recuperacao de niquel de catalisadores equilibrados (E-CAT) atraves da tecnica de remediacao eletrocinetica

    Energy Technology Data Exchange (ETDEWEB)

    Baptista, Adalberto; Ponte, Haroldo de Araujo [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil)

    2004-07-01

    The purpose of this work is to describe the feasibility evaluation using FCC catalyst for treatment from industrial wastes increasing the life time of the spent catalysts and reducing the environmental impact. Evaluated the reutilization of catalyst in process recovery of nickel adsorbed. The technique used was the Electrokinetic Remediation. This technique is based in application of a direct current of low intensity or low potential between the electrodes located in soil. The pollutants are mobilized how loaded species or particles. It used a electrokinetic reactor with approximated volume of 1200 cm{sup 3}, where the residue is placed. In your extremity are adapted two cameras of acrylic, being one anodic, with steel inox 304 electrode, and other cathodic, with lead electrode. In anodic camera, it was injected, with aid a bomb, a solution of sulfuric acid, which work as electrolyte, to a flow rate of 20 ml/h. Was evaluated the desorption of Nickel in the equilibrium catalyst submitting a variation of the conditions of the concentration and potential. (author)

  3. Acoustoelastic evaluation of an OCTG pipe welded casing type API 5CT N80Q; Avaliacao acustoelastica de tubo OCTG do tipo casing API 5CT N80Q com solda

    Energy Technology Data Exchange (ETDEWEB)

    Fonseca, Manoel A.C.; Bittencourt, Marcelo S.Q. [nstituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Payao Filho, Joao C [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil)

    2012-07-01

    This paper presents an acoustoelastic evaluation of an OCTG API 5CT N80Q casing pipe welded by the ERW/HFIW process, which is used in oil and gas exploration and exploitation. The ultrasonic technique of acoustic birefringence was employed to evaluate the acoustoelastic behavior of the T-380 CSN steel plate used to manufacture the pipe under study, and the acoustoelastic behavior of the pipe itself before subjected to the heat treatment of quench tempering and after subjected to hot straightening. It was observed a reduction in the level of anisotropy after these two manufacturing steps, what shows the efficacy of the heat treatment of quench tempering and hot straightening. After the hot straightening step, a test specimen was extracted from the pipe containing at its center the circumferential area of inspection under evaluation, which was subjected to a milling cutting operation along the weld. The opening of specimen after cutting indicated that the residual circumferential stress in the pipe was tensile. A comparison between the acoustoelastic states of the pipe after the hot straightening and the cutting operations indicated a 63% reduction in the level of anisotropy after the latter operation. (author)

  4. Development of a model for strategic evaluation of the global performance of the Brazilian Nuclear Energy Commission; Desenvolvimento de um modelo para avaliacao estrategica do desempenho global da Comissao Nacional de Energia Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Staude, Fabio

    2003-07-01

    A conscious, effective course of action, now essential to several areas and organizations, has become a must in the public administration. In this sense, modem managerial practices may contribute significantly for governmental organism to take up an attitude shifted to results in the society, without losing its eminently public function. In order to measure the social impact of the activities of the State as a whole, institutions must use mechanisms that allow self-evaluations of their performance, so as to verify the return obtained as a result of their efforts. However, most institutions do not have structured tools for such evaluation. The present study proposes to the Comissao Nacional de Energia Nuclear a model to measure its global performance, offering a proposed architecture for the measurement system in accordance with the results of the planning process of the Institution. The methodology presented also comprises the definition of cause-and-effect critical models between the strategic objectives of the organization and its respective factors critic ai for success, as well as related performance indicators. This work also includes the breakdown of the measurement system for the macro processes of the organization, optimizing resource sharing and the flow of information, avoiding redundant efforts and bringing forth further advantages aiming at creating a organizational 'unit'. Within this context, the developed model may offer substantial help for the improvement of the maturity of the organization in goal-oriented management, considering that the proposed global performance measurement follows a planned structure, with a systemic approach of the organization, allowing that the process be carried out in a way that is transparent and objective. (author)

  5. Development of a model for strategic evaluation of the global performance of the Brazilian Nuclear Energy Commission; Desenvolvimento de um modelo para avaliacao estrategica do desempenho global da Comissao Nacional de Energia Nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Staude, Fabio

    2003-07-01

    A conscious, effective course of action, now essential to several areas and organizations, has become a must in the public administration. In this sense, modem managerial practices may contribute significantly for governmental organism to take up an attitude shifted to results in the society, without losing its eminently public function. In order to measure the social impact of the activities of the State as a whole, institutions must use mechanisms that allow self-evaluations of their performance, so as to verify the return obtained as a result of their efforts. However, most institutions do not have structured tools for such evaluation. The present study proposes to the Comissao Nacional de Energia Nuclear a model to measure its global performance, offering a proposed architecture for the measurement system in accordance with the results of the planning process of the Institution. The methodology presented also comprises the definition of cause-and-effect critical models between the strategic objectives of the organization and its respective factors critic ai for success, as well as related performance indicators. This work also includes the breakdown of the measurement system for the macro processes of the organization, optimizing resource sharing and the flow of information, avoiding redundant efforts and bringing forth further advantages aiming at creating a organizational 'unit'. Within this context, the developed model may offer substantial help for the improvement of the maturity of the organization in goal-oriented management, considering that the proposed global performance measurement follows a planned structure, with a systemic approach of the organization, allowing that the process be carried out in a way that is transparent and objective. (author)

  6. TEXACO GASIFICATION PROCESS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the evaluation of the Texaco Gasification Process (TGP) conducted under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The Texaco Gasification Process was developed by Texaco Inc. The TGP is a comm...

  7. Evaluation of potential of adsorption of U, Th, Pb, Zn and Ni by coconut fibers; Avaliacao do potencial de adsorcao de U, Th, Pb, Zn e Ni pelas fibras de coco

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Raquel Almeida

    2009-07-01

    The residual biomass from agricultural activities has been evaluated as biosorbent for metals and organic composts from aqueous solutions, because of its adsorptive properties, low cost, abundance and to be a renewable resource. In this work, the efficiency of coir pith as biosorbent for the removal of U, Th, Pb, Zn e Ni ions from the aqueous solutions is presented. The coir pith is a by-product of the harvest of the coconut, a renewable natural source. The study was conducted by batch method. The influence of pH from 1 to 8, the dosage of the coir pith and the equilibrium time were studied. The adsorption of metal ions increased with the increase of pH and the dose. The Langmuir and Freundlich models were applied to describe the adsorption equilibrium isotherm. The kinetic process was studied using the pseudo-first order and pseudo-second order models. The Gibbs free energy was calculated. In the concentration range of 100 mg.L{sup -1} - 500 mg.L{sup -1}, the adsorption process was described better by the Langmuir equation for Pb{sup 2+} and Zn{sup 2+} ions and the Freundlich equation for UO{sub 2} 2{sup +}, Th{sup 4+} and Ni{sup 2+} ions, and represented by the pseudo-second order model. The biosorption process for removal of metal ions from the solutions was considered spontaneous. The results were promising, showing perspectives of application of coir pith as biosorbent of U, Th, Pb, Zn and Ni ions in wastewater treatment processes. (author)

  8. Evaluation of physical and mechanical and gaseous emissions in reuse waste in the development of a ceramic products; Avaliacao das propriedades fisica e mecanica e de emissoes gasosas no reaproveitamento de residuos no desenvolvimento de um produto ceramico

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, R.A.; Martins, B.E.D.B.S.; Couto, V.M.P.; Campos, J.C.; Guimaraes, C.S.; Almeida, V.C., E-mail: valeria@eq.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Centro de Tecnologia. Escola de Quimica

    2011-07-01

    The search for alternative environmentally less aggressive disposal of solid waste has been the path taken to reverse the negative scenario established by the improper disposal of these materials. The aim of this study was to evaluate the recycling of the waste: sludge from water treatment and WTP, glass beads, obtained from the blasting chamber, aiming to develop a ceramic material. Compositions were prepared with different percentages of waste. The ceramic bodies were sintered at 900 deg C, 1000 deg C and 1100 deg C being tested for water absorption and bending failure stress, and characterized by X-ray diffraction We performed the analysis of greenhouse gases released during the burning process. Preliminary results indicate that the ceramic material produced did not show a gain of resistance expected by the introduction of micro glass beads, and that we must observe the legal limits for air emissions coming from burning.(author)

  9. Resistance evaluation expanded perlite the leaching acid: variation of parameters concentration, time and leaching agent; Avaliacao da resistencia da perlita expandida a lixiviacao acida: variacao dos parametros concentracao, tempo e agente lixiviante

    Energy Technology Data Exchange (ETDEWEB)

    Almeida, J.M.F. de; Damasceno Junior, E.; Oliveira, E.S.; Fernandes, N.S., E-mail: janielequimicaufrn@gmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Instituto de Quimica. Laboratorio de Quimica Analitica e Meio Ambiente

    2016-07-01

    The expanded perlite is an amorphous aluminosilicate which presents in its composition about 75.0% silicon oxide (SiO2), also having other species in the composition as oxides of some metals. Silicas and silicates have been used in the environmental field, in relevant anti-corrosive activity. In this context, materials that exposes too many highly acidic media, require preservation against this type of wear, as this type of damage causes a great financial loss, thereby requiring low-cost, abundant materials, non-toxic and easy to purchase as some silica coating. The study evaluated the perlite expanded resistance against an acid leaching process. With undeniability the use of strong acids and different working conditions were not able to remove the oxides present on the expanded perlite sample, thus demonstrating the high strength of the expanded perlite against acid attacks. (author)

  10. Evaluation of computational model for supervision and control of greenhouses in order to reduce the consumption of electrical energy; Avaliacao de modelo computacional para supervisao e controle de casas de vegetacao visando a reducao do consumo de energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Laranjeira, Evandro Gomes; Rossi, Luis Antonio [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola

    2006-07-01

    Since a long time protected culture is a well-known technology and the increasing of biological knowledge and the new technologies development resulted in a great emphasis on climatic control. Nowadays there are several equipment in the market able to control the temperature, relative humidity, ventilation, solar radiation and artificial illumination as well. Difficulties are related to the manipulation of all these elements in an adequate way to reach the optimum climate conditions with a minimum resource and input expenses. In this project it was realized an climatic manager algorithm software evaluation using Fuzzy logic and climate models based on 'thermal loading calculation', psychrometry, managing the most common equipment available in the market with a minimum human intervention in the process. This Project has been made in two distinct structures and sorted technological levels. (author)

  11. Evaluation of Models of the Reading Process.

    Science.gov (United States)

    Balajthy, Ernest

    A variety of reading process models have been proposed and evaluated in reading research. Traditional approaches to model evaluation specify the workings of a system in a simplified fashion to enable organized, systematic study of the system's components. Following are several statistical methods of model evaluation: (1) empirical research on…

  12. Evaluation and development of direct burning natural gas industrial equipment in the food sector; Avaliacao e desenvolvimento de equipamentos industriais de queima direta de gas natural no setor de alimentos

    Energy Technology Data Exchange (ETDEWEB)

    Schwob, Marcelo; Morales, Maria Elizabeth; Henriques, Mauricio; Guimaraes, Marcio; Tapia, Roberto; Rodrigues, Joaquim; Faccion, Alexandre [Instituto Nacional de Tecnologia (INT), Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The aim of this study, focused in the food sector, is evaluate and develop technologies used in equipment of direct burning natural gas, as ovens and driers of common use in the toasting coffee, noodles and biscuits industries. We have developed an archetype of oven for baking, seeking to incorporate new technological concepts but showing operational conditions of great attractiveness for the users of this kind of equipment. Above all, aiming the optimization of the technologies to improve the energy efficiency, to reduce costs and to increase the operational security. Thus, a survey of the thermal equipment in the mentioned industrial sector was made, followed of an evaluation of the technical possibilities of its incorporation in that sector, adaptations and the modifications of engineering projects, identifying the possibilities of productivity increase, improvement of quality and greater competitiveness, as well as the reduction of atmospheric emissions. So, It has been proposed solutions as the decentralized use of the thermal energy, recovery of heat of exhaustion gases, optimization of the thermal insulation, reduction of thermal inertia and the automatization of the control of the combustion in ovens and/or driers of the mentioned sectors. The main results of this study are: the possibility of reduction of, 32 to 37% in the consumption of thermal energy in the ovens of biscuit production, of 12 to 15% in the toasting of coffee and 20 to 30% in the processes of noodles production. Saving of around 25% would be expected in the small bearing ovens for baking. (author)

  13. Synthesis of polyisoprene and its evaluation as reducer of flow loss temperature of paraffinic drilling fluid; Sintese de poliisopreno e sua avaliacao como redutor da temperatura de perda de fluidez de fluido de perfuracao parafinico

    Energy Technology Data Exchange (ETDEWEB)

    Palermo, Luiz Carlos; Pires, Renata V.; Sant' Anna, Monica; Cardoso, Jaciene J.F.; Lucas, Elizabete F. [Universidade Federal do Rio de Janeiro/ Instituto de Macromoleculas/ Laboratorio de Macromoleculas e Coloides na Industria de Petroleo, Rio de Janeiro, RJ (Brazil)], e-mail: luizpalermo@ima.ufrj.br

    2011-07-01

    N-paraffin fluids are widely used in drilling oil wells. However, under low temperature, such as those found in deep water, they lose their ability to flow due to solidification of paraffins. In order to keep the fluid flowing, isoparaffins are added to fluids. Nevertheless, the safety of the process is affected, due to its low flash point, especially during the storage in platforms offshore. This paper aims to obtain polymeric additives that can reduce the flow loss temperature of the n-paraffin fluid, replacing the isoparaffin, without affecting its rheological properties. So, oligomers/polymers based on isoprene were synthesized and the rheological behavior of the products and their mixtures with n-paraffin, as a function of decreasing temperature, was evaluated. Products from chemical degradation of natural rubber (NR) were also evaluated. The results showed that samples presenting relatively low molar mass, about 5,000 g/mol, exhibited good performance. When obtaining product by polymerization, a chain transfer agent must be used. (author)

  14. Disinfection of effluent of wastewater treated using solar energy (SODIS): evaluation of a solar concentrator device; Desinfeccao de efluentes com tratamento terciario utilizando energia solar (SODIS): avaliacao do uso do dispositivo para concentracao dos raios solares

    Energy Technology Data Exchange (ETDEWEB)

    Paterniani, Jose Euclides Stipp; Silva, Marcelo Jacomini Moreira da [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Faculdade de Engenharia Mecanica. Saneamento e Ambiente]. E-mail: pater@agr.unicamp.br

    2005-01-15

    Besides being an available natural resource, the solar energy is very applicable in places with few recourses and low money resources, because there aren't either the need of chemical products neither a huge cost (commercial materials can be reused). To make this job we re-used PET bottles half painted black with the variables: 1, 2, 4 and 6 hours of heat exposition and we also used a concentrator of rays of sunshine. The affluent control parameters were turbidity, apparent color, temperature, total coliforms and E. coli. These last three were evaluated before and after the disinfection process (effluent parameters). To assess the bacteria reactivation we kept the water in bottles for 24 hours, pretending a very common situation in Brazilian rural houses. We conclude that the use of the concentrator of rays of sunshine can reduce the heat exposition from 6 to 4 hours, without harm the SODIS efficiency. Using the concentrator of rays of sunshine for 6 hours we can obtain, besides SODIS, the process of solar pasteurization (SOPAS), which stops the re-growth of bacteria with a 70 deg C water temperature. We also observed that when the sky is cloudy the incidence of solar radiation and, therefore, the SODIS efficiency decrease, even if the water temperature is higher during the disinfection. Although, this factor doesn't mean a significant influence statistically. (author)

  15. Evaluation of radio-induced DNA damage and their repair in human lymphocytes by comet assay or single cell gel electrophoresis; Avaliacao do dano radioinduzido no DNA e reparo em linfocitos humanos pelo metodo do cometa (single cell gel electrophoresis)

    Energy Technology Data Exchange (ETDEWEB)

    Nascimento, Patricia A. do; Suzuki, Miriam F.; Okazaki, Kayo [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    1997-12-01

    The comet assay, also called single cell gel electrophoresis technique, permits to evaluate quantitatively DNA breakage induced by chemical and physical agents at the level of the single cell. The present paper refers to the construction of dose-response curves to DNA damage and repair studies in human peripheral lymphocytes, utilizing the comet assay for the radiosensitivity analysis. So, the blood samples were obtained from healthy donors (40-50 year old), irradiated in a {sup 60} Co source (GAMMACEL 220) with doses of 0.17, 0.25, 0.57, 1.10, 2.12 and 4.22 Gy (0.59 Gy/min.) and processed 1 and 24 hours after the exposition. Results obtained showed a increase in the total lenght of comet (DNA migration) as a function of radiation dose in samples processed 1 and 24 hours after the treatment. The DNA lesion in irradiated lymphocytes with 4.22 Gy (means value of 101.4 {mu}m) were 3.4 times higher than in the untreated lymphocytes (mean value of 30 {mu}m) instead of 24 hours after the irradiation were 1.5 times higher (mean value of 46.3 {mu}m). This reduction on DNA repair occurred in these cells. It was also possible visualized the presence of subpopulations of the cells with different sensitivity and repair capacity to ionizing radiation in these donors. (author). 8 refs., 3 figs.

  16. Radiation effects evaluation for electrons sheaf in packages resistance in a Lasioderma serricorne, Plodia interpunctella and Sitophilus zeamais; Avaliacao dos efeitos da radiacao por feixe de eletrons na resistencia de embalagens a Lasioderma serricorne, Plodia interpunctella e Sitophilus zeamais

    Energy Technology Data Exchange (ETDEWEB)

    Alves, Juliana Nazare

    2011-07-01

    The plagues of stored products consist of a man problem, depreciating products and causing economical damages. Among these curses we have Lasioderma serricorne (F. 1792), Sitophilus zeamais (M. 1855) and Plodia interpunctella (H. 1813) known by infesting stored products as: grains, brans, flours, coffee, tobacco, dried fruits and spices. These curses perforate and penetrate the packages, ovipositing over the substratum. In this context the package plays a fundamental part, preventing the contact and curses' proliferation in the packed product. So, to protect the packed product and to prolong its shelf life, the package should have good mechanical resistance to tension and perforation, good sealing, good barrier properties and should not transfer odors nor strange flavors to the packed product. The ionizing radiation can cause structural changes in polymer packages, these changes are caused by the scission processes and reticulation of the polymers chains. These are concurrent processes and the predominance of one over the other depends on the chemical structure of the polymer, the irradiation conditions and specific factors of the material that will absorb the energy. This work had the objective to evaluate the changes in mechanical properties of package structures used to store granola, cereal bar and pasta, as well as its resistance to perforation by L. serricorne, P. interpunctella and S. zeamais, when submitted to electrons sheaf radiation. In this methodology were used five structures of commercially utilized packages to store granola, cereal bar and pasta composed by (Polypropylene bi-oriented metallic/Polypropylene bi-oriented coextruded - BOPPmet/BOPP 50 {mu}m), (Polypropylene bi-oriented/Polypropylene - BOPP/PP 50 {mu}m), Poli (ethylene terephthalate) metallic/Polypropylene bi-oriented coextruded - PETmet/BOPP 32 {mu}m), Poli (ethylene terephthalate) /Polypropylene - PET/PP1 72 {mu}m), Poli (ethylene terephthalate)/Polypropylene - PET/PP2 32 {mu

  17. Coal liquefaction process streams characterization and evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Robbins, G.A.; Brandes, S.D.; Winschel, R.A.; Burke, F.P.

    1992-03-01

    CONSOL R D is conducting a three-year program to characterize process and product streams from direct coal liquefaction process development projects. The program objectives are two-fold: (1) to obtain and provide appropriate samples of coal liquids for the evaluation of analytical methodology, and (2) to support ongoing DOE-sponsored coal liquefaction process development efforts. The two broad objectives have considerable overlap and together serve to provide a bridge between process development and analytical chemistry.

  18. Evaluation of effect of surface treatment on corrosion resistance of Nd-Fe-B magnets; Avaliacao do efeito de tratamentos superficiais na resistencia a corrosao de magnetos de Nd-Fe-B

    Energy Technology Data Exchange (ETDEWEB)

    Martins, Emerson Alves

    2009-07-01

    Nd-Fe-B magnets produced by powder metallurgy are highly susceptible to corrosion due to their complex microstructure and intrinsic porosity due to their fabrication process. Moreover, these magnets have excellent magnetic properties and find many applications. In the nuclear area, permanent magnets based on rare earth transition-iron-boron (Ne-Fe-B) are used in the manufacture of magnetic media (magnetic levitation) for ultra-centrifuges used for isotopic enrichment of uranium employed in nuclear reactors. In dentistry these types of magnets are used to fix total and partial prostheses on implants; in orthodontics to correct dental malocclusion and make moves; in buco-maxillo-facial surgery for setting facial prostheses of large defects of the face. In electronic equipment, they are used in scales, locks, electric motors and particularly in the manufacturing of hard drives of computers. The objective of this study is to evaluate the corrosion resistance of the magnet tested and surface treatments that could replace chromating that generates toxic residues and present high cost of processing waste with treatments that are environmentally friendly. The evaluation of the corrosion resistance was carried out through the analysis potentiodynamic polarization curves, electrochemical impedance spectroscopy, monitoring of corrosion potential as a function of test time and scanning electron microscopy to try to correlate the magnet microstructure with its corrosion resistance. The results show that these magnets are highly susceptible to corrosion that occurs preferentially in the Nd-rich phase, located in the boundaries of the magnetic matrix phase ({psi}). Treatment with silane, cerium, sam, Cr 6{sup +}, tricationic phosphate followed by bath of chromium trioxide and in NaH{sup 2}PO{sup 4} solution for 24 hours followed by bath of zinc sulphate did not improve the corrosion resistance of the magnet. Among the treatments used, immersion in NaH{sup 2}PO{sup 4} solution for

  19. Energetic evaluation of low potential biomass gasifier coupled with a burner of the produced gas for generation of heat; Avaliacao energetica de um gaseificador de biomassa de baixa potencia, associado a um combustor do gas produzido, para geracao de calor

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Samuel [Universidade de Brasilia (FAV/UNB), DF (Brazil). Fac. de Agronomia e Medicina Veterinaria], email: samuelmartin@unb.nr; Silva, Jadir Nogueira [Universidade Federal de Vicosa (UFV), MG (Brazil). Dept. de Engenharia Agricola; Machado, Cassio Silva; Zanatta, Fabio Luis; Galvarro, Svetlana F.S. [Universidade Federal de Vicosa (UFV), MG (Brazil)

    2011-07-01

    In the search of alternatives for sustainable socio-economic development, this study had the objective of evaluating the energetic performance of a concurrent flow biomass gasifier associated with a burner for the gas produced which was of low potential for air heating using a renewable energy source (substituting non-renewable). In this system 4 tests were performed using eucalyptus chips (tests 1 and 2) and logs (tests 3 and 4) as fuel, for the two fan motor frequencies of 60 and 50 hertz. Temperature in the combustion chamber was monitored, along with fuel consumption and other variables. In the tests, the average exhaust air temperature was maintained between 92.7 and 100.4 deg C, and the reduction in the motor frequency from 60 to 50 Hz caused an increase in the duration of the tests. The system presented the best energetic performance when utilizing a frequency of 60 Hz for both fuel types. However, the results of energy efficiency varied very little when comparing tests performed at the same fan frequency. Thus, the gasification process was little affected by variation in the physical characteristics of the tested fuels, and it was recommended that the equipment operate with a frequency of 60 Hz. (author)

  20. Rhodium (II) cycle alkanecarboxylate: synthesis, spectroscopic and thermo analytic studies and evaluation of the antitumor potential; Cicloalcanocarboxilatos de rodio(II). Sintese, estudos espectroscopicos, termoanaliticos e avaliacao do potencial antitumor

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Aparecido Ribeiro de

    1995-07-01

    Four new rhodium(II) carboxylates (cyclopropane, cyclobutane, cyclopentane, and cyclohexanecarboxylate), and other already known rhodium (II) carboxylates (acetate, propionate, butyrate, metoxyacetate, dichloroacetate, and trifluoroacetate), have been prepared for study in this work. The compounds were characterized by elementary and thermogravimetric analysis, magnetic susceptibility, and electronic, Raman, and infrared spectroscopy. The reaction of Rh CL{sub 3}.aq with the sodium carboxylates was studied aiming to improve the understanding of the redox process involved. Spectroscopy studies (Raman and electronic) were made to examine the transition involved in the Rh-Rh and Rh-O bonds. The results have shown a direct relation between the force of the carboxylic acid and the Rh-O force, but show a inverse relation with the Rh-Rh bond force. Thermal analysis studies were undertaken and the obtained date show a resemblance of the TG/DTG curves with that found in literature. In the other hand, the DSC curves show a different results: in open crucible, the peaks associated with the cage breakdown are exothermic and, in closed crucible this peaks are endothermic. The thermodecomposition products were analyzed. The evolved gases were identified by GC?MS and {sup 1}H and {sup 13} C NMR spectra. The residues were analyzed by X-ray diffraction. Antitumor activity of rhodium cyclopropanecarboxylate was evaluated in vitro (cell cultures K562 and Ehrlich) and in vivo (Balb-c mice with ascite Ehrlich tumor), indicating an increased life span (87.5%) of the treated animals. (author)

  1. The tools for evaluating logistics processes

    Directory of Open Access Journals (Sweden)

    Michał Adamczak

    2013-12-01

    Full Text Available Background: The growing importance of business process approach and dynamic management is triggered by market expectations for lead time reductions and the pressure for cost cuts. An efficient process management requires measurement and assessment skills. This article is intended to present the tools used in evaluating processes and the way in which they work together under simulated conditions. Methods: The project's Authors believe that a process can be assessed by measuring its attributes: cost, time and quality. An assessment tool has been developed for each of those attributes. For costs - it could be activity based costing, for time - value stream mapping; for quality - statistical process control. Each tool allows for evaluating one of the attributes, any element in the process hierarchy. The methods presented in the paper have been supplemented with process modelling and simulation. Results: In order to show how process assessment tools are combined with process simulation the Authors show a sample process in three versions (serial, parallel and mixed. A variant simulation (using iGrafx software allows for determining the values of attributes in the entire process based on the data set for its components (activities. In the example under investigation the process variant has no impact on its quality. Process cost and time are affected. Conclusions: The tools for identifying attribute values, in combination with process modelling and simulation, can prove very beneficial when applied in business practice. In the first place they allow for evaluating a process based on the value of the attributes pertaining to its particular activities, which, on the other hand, raises the possibility of process configuration at the design stage. The solution presented in the paper can be developed further with a view to process standardization and best variant recommendation.  

  2. Dyes removal of textile wastewater onto surfactant modified zeolite from coal ash and evaluation of the toxic effects; Remocao de corantes de efluente textil por zeolita de cinzas de carvao modificada por surfactante e avaliacao dos efeitos toxicos

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Patricia Cunico

    2015-07-01

    Zeolites synthesized from fly and bottom ashes and modified with hexadecyltrimethylammonium (HDTMA) were used as adsorbent to remove dyes - Solophenyl Navy (SN) and Solophenyl Turquoise (ST) and their hydrolysed forms Solophenyl Navy Hydrolysed (SNH) and Solophenyl Turquoise Hydrolysed (STH), from simulated textile wastewater. The HDTMA-modified fly zeolite (ZMF) and HDTMA-modified bottom zeolite (ZMB) were characterized by different techniques, as X-ray fluorescence spectrometry, X-ray diffraction and scanning electron microscopy, etc. The ZMF and ZMB presented negative charge probably due to the formation of a partial bilayer of HDTMA on exchangeable active sites on the external surface of unmodified zeolite. Initial dye concentration, contact time and equilibrium adsorption were evaluated. The adsorption kinetic for SN, ST, SNH and STH onto the zeolites followed the pseudo second-order model. The equilibrium time was 20 min for SN and ST and 30 min for SNH and STH, respectively. Langmuir, Freundlich and Temkin models were applied to describe the adsorption isotherms. Adsorption of the dyes were best described by the Langmuir model, with exception to SN/ZPM, SNH/ZPM and SNH/ZLM systems that followed Freundlich model. The maximum adsorption capacities were 3,64; 3,57; 2,91 e 4,93 for SN, ST, SNH e STH by ZLM, respectively and 0,235; 0,492; 1,26 e 1,86 by ZPM, in this order. The best performance for hydrolyzed dyes has been attributed to reduction of the size of dyes molecules during the hydrolysis process. Acute toxicity of the dyes to a different organism were evaluated by different test-organisms. Waterflea, Ceriodaphnia dubia showed EC50 value of 1,25; 54,5; 0,78 and 2,56 mgL{sup -1} for SN, ST, SNH and STH, respectively. The plant Lemna minor showed EC50 values of 18,9; 69,4; 10,9 and 70,9 mgL{sup -1} for SN, ST, SNH and STH, respectively. Midges larvae of Chironomus tepperi showed EC50 values of 119 and 440 mgL{sup -1} for SN and ST, respectively. Regarding

  3. Evaluation and processing of nuclear data

    International Nuclear Information System (INIS)

    Pearlstein, S.

    1981-01-01

    The role a nuclear data evaluator plays in obtaining evaluated nuclear data, needed for applications, from measured nuclear data is surveyed. Specific evaluation objectives, problems, and procedures are discussed. The use of nuclear systematics to complement nuclear experiment and theory is described. Using the Evaluated Nuclear Data File (ENDF) as an example the formatting, checking, and processing of nuclear data is discussed as well as the testing of evaluated nuclear data in the calculation of integral benchmark experiments. Other important topics such as the Probability Table Method and interrelation between differential and integral data are also discussed. (author)

  4. Evaluation and processing of nuclear data

    International Nuclear Information System (INIS)

    Pearlstein, S.

    1980-01-01

    The role a nuclear data evaluator plays in obtaining evaluated nuclear data, needed for applications, from measured nuclear data is surveyed. Specific evaluation objectives, problems, and procedures are discussed. The use of nuclear systematics to complement nuclear experiment and theory is described. With the Evaluated Nuclear Data File (ENDF) as an example, the formatting, checking, and processing of nuclear data are discussed as well as the testing of evaluated nuclear data in the calculation of integral benchmark experiments. Other important topics such as the Probability Table Method and interrelation between differential and integral data are also discussed. 25 figures

  5. National Security Technology Incubator Evaluation Process

    Energy Technology Data Exchange (ETDEWEB)

    None, None

    2007-12-31

    This report describes the process by which the National Security Technology Incubator (NSTI) will be evaluated. The technology incubator is being developed as part of the National Security Preparedness Project (NSPP), funded by a Department of Energy (DOE)/National Nuclear Security Administration (NNSA) grant. This report includes a brief description of the components, steps, and measures of the proposed evaluation process. The purpose of the NSPP is to promote national security technologies through business incubation, technology demonstration and validation, and workforce development. The NSTI will focus on serving businesses with national security technology applications by nurturing them through critical stages of early development. An effective evaluation process of the NSTI is an important step as it can provide qualitative and quantitative information on incubator performance over a given period. The vision of the NSTI is to be a successful incubator of technologies and private enterprise that assist the NNSA in meeting new challenges in national safety and security. The mission of the NSTI is to identify, incubate, and accelerate technologies with national security applications at various stages of development by providing hands-on mentoring and business assistance to small businesses and emerging or growing companies. To achieve success for both incubator businesses and the NSTI program, an evaluation process is essential to effectively measure results and implement corrective processes in the incubation design if needed. The evaluation process design will collect and analyze qualitative and quantitative data through performance evaluation system.

  6. A Process for the Evaluation of Training.

    Science.gov (United States)

    Civil Service Commission, Washington, DC. Training Leadership Div.

    The process of evaluating the training of federal civil service employees is summarized in three phases: (1) the focus--establishing the scope and objectives of the evaluation effort, (2) the plan--developing a blueprint for conducting the project, and (3) the implementation--obtaining necessary data, interpreting them, and providing conclusions…

  7. Using Analytic Hierarchy Process in Textbook Evaluation

    Science.gov (United States)

    Kato, Shigeo

    2014-01-01

    This study demonstrates the application of the analytic hierarchy process (AHP) in English language teaching materials evaluation, focusing in particular on its potential for systematically integrating different components of evaluation criteria in a variety of teaching contexts. AHP is a measurement procedure wherein pairwise comparisons are made…

  8. Self-Assessment in the Evaluation Process.

    Science.gov (United States)

    Koehler, Michael

    1990-01-01

    Describes a four-step process to involve teachers in self-evaluation that results in performance ownership. When supervisors incorporate teacher self-assessments into classroom observation reports, teachers are more willing to engage in follow-up professional growth activities and perceive supervisors as helpers in the process. (MLH)

  9. Conceptual modelling of human resource evaluation process

    Directory of Open Access Journals (Sweden)

    Negoiţă Doina Olivia

    2017-01-01

    Full Text Available Taking into account the highly diverse tasks which employees have to fulfil due to complex requirements of nowadays consumers, the human resource within an enterprise has become a strategic element for developing and exploiting products which meet the market expectations. Therefore, organizations encounter difficulties when approaching the human resource evaluation process. Hence, the aim of the current paper is to design a conceptual model of the aforementioned process, which allows the enterprises to develop a specific methodology. In order to design the conceptual model, Business Process Modelling instruments were employed - Adonis Community Edition Business Process Management Toolkit using the ADONIS BPMS Notation. The conceptual model was developed based on an in-depth secondary research regarding the human resource evaluation process. The proposed conceptual model represents a generic workflow (sequential and/ or simultaneously activities, which can be extended considering the enterprise’s needs regarding their requirements when conducting a human resource evaluation process. Enterprises can benefit from using software instruments for business process modelling as they enable process analysis and evaluation (predefined / specific queries and also model optimization (simulations.

  10. Nanocomposite biofilms obtained from Whitemouth croaker (Micropogonias furnieri) protein isolate and Montmorillonite: evaluation of the physical, mechanical and barrier properties; Biofilmes nanocompositos obtidos de isolado proteico de corvina (Micropogonias furnieri) e Montmorilonita: avaliacao das propriedades fisicas, meanicas e de barreira

    Energy Technology Data Exchange (ETDEWEB)

    Cortez-Vega, William Renzo, E-mail: williamvega@ufgd.edu.br [Universidade Federal da Grande Dourados (UFGD), MS (Brazil). Fac. de Engenharia; Bagatini, Daniela Cardozo; Souza, Juliana Tais Andreghetto de; Prentice, Carlos, E-mail: danielabagatini@hotmail.com, E-mail: ju.andreghetto@hotmail.com, E-mail: dqmprent@furg.b [Universidade Federal do Rio Grande (FURG), RS (Brazil). Escola de Quimica e Alimentos

    2013-06-15

    The objective of this study was to evaluate the properties of nanocomposite biofilms based on Whitemouth croaker (Micropogonias furnieri) protein isolate with organophilic clays. Initially the croaker protein isolate (CPI) was obtained using the pH shifting process from by-products of croaker industrialization. A Box and Behnken experimental design was used to develop the films, with three levels of CPI (2, 3.5 and 5 g.100 g{sup -1} solution), montmorillonite MMT clay (0.3, 0.5 and 0.7 g.100 g{sup -1} solution) and glycerol (25, 30 and 35 g.100g{sup -1} CPI). The polymeric films were produced by the 'casting technique'. The tensile strength values ranged from 7.2 to 10.7 MPa and the elongation values from 39.6 to 45.8 %. The water vapor permeability (WVP) values ranged from 3.2 to 5.5 (g.mm.m{sup -2}.d{sup -1}) and the CPI had an average protein content of 97.87 % protein (d. b.). It was concluded that the nanocomposite films produced from CPI with MMT were promising from the standpoint of their mechanical properties, visual appearance and easy handling, as well as for their low water vapor permeability and low water solubility. With respect to their mechanical properties, the concentrations of CPI and MMT were the main factors influencing the development of the nanocomposite films. The results obtained from the experimental design indicated that 3.5 g of CPI.100 g{sup -1}solution, 0.5 g of MMT.100 g{sup -1} solution and 30 g of glycerol.100 g{sup -1} CPI would be the ideal parameters for the development of nanocomposite films by 'casting'. (author)

  11. Evaluation of the temperature rise in pulp chamber during class V preparation with Er:YAG laser; Avaliacao da temperatura na camara pulpar durante preparo classe V com laser de Erbio:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Picinini, Leonardo Santos

    2001-07-01

    One of the major concerns regarding laser irradiation in the dentistry field is the overheating in dental tissue, specially pulpal tissue. A temperature raise over 5.5 deg C is considered to be harmful to its vitality. The current study evaluated the temperature increase in the pulp chamber, during class V preparation, performed with the laser Er:YAG in 36 bovine incisive extracted teeth. The samples were eroded on the outer side of the vestibular wall to obtain the dentinal thickness of 2.0 mm (group I), 1.0 mm (group II) and 0.5 mm (group III). Thermocouples were fixed to the inner part of the vestibular wall using thermal paste, through the palatine opening of the samples. Class V cavities were prepared in the vestibular side only in 1 mm{sup 2} thick dentins. Irradiation parameters used were: 500 mJ/10 Hz, 850 mJ/10 Hz and 1 000 mJ/10 Hz for all the groups. The results were processed by a microcomputer. This study showed that the temperature increased into the pulpal cavity reached around 3 deg C for the groups I (2,0 mm thick dentine) and II (1.0 mm thick dentine). In the group III (0.5 mm thick) temperature was around 5.5 deg C. Thus, the parameters used for cavity preparation, using Er:YAG laser, were safe in relation to the temperature raise for dentinal thickness of 1,0 and 2,0 mm; in 0.5 mm thick dentins, temperature increase reached 5.5 deg C and an appropriate correction in the laser parameters was necessary. (author)

  12. Nanocomposite biofilms obtained from Whitemouth croaker (Micropogonias furnieri) protein isolate and Montmorillonite: evaluation of the physical, mechanical and barrier properties; Biofilmes nanocompositos obtidos de isolado proteico de corvina (Micropogonias furnieri) e Montmorilonita: avaliacao das propriedades fisicas, meanicas e de barreira

    Energy Technology Data Exchange (ETDEWEB)

    Cortez-Vega, William Renzo, E-mail: williamvega@ufgd.edu.br [Universidade Federal da Grande Dourados (UFGD), MS (Brazil). Fac. de Engenharia; Bagatini, Daniela Cardozo; Souza, Juliana Tais Andreghetto de; Prentice, Carlos [Universidade Federal do Rio Grande (FURG), RS (Brazil). Escola de Quimica e Alimentos

    2013-06-15

    The objective of this study was to evaluate the properties of nanocomposite biofilms based on Whitemouth croaker (Micropogonias furnieri) protein isolate with organophilic clays. Initially the croaker protein isolate (CPI) was obtained using the pH shifting process from by-products of croaker industrialization. A Box and Behnken experimental design was used to develop the films, with three levels of CPI (2, 3.5 and 5 g.100 g{sup -1} solution), montmorillonite MMT clay (0.3, 0.5 and 0.7 g.100 g{sup -1} solution) and glycerol (25, 30 and 35 g.100g{sup -1} CPI). The polymeric films were produced by the 'casting technique'. The tensile strength values ranged from 7.2 to 10.7 MPa and the elongation values from 39.6 to 45.8 %. The water vapor permeability (WVP) values ranged from 3.2 to 5.5 (g.mm.m{sup -2}.d{sup -1}) and the CPI had an average protein content of 97.87 % protein (d. b.). It was concluded that the nanocomposite films produced from CPI with MMT were promising from the standpoint of their mechanical properties, visual appearance and easy handling, as well as for their low water vapor permeability and low water solubility. With respect to their mechanical properties, the concentrations of CPI and MMT were the main factors influencing the development of the nanocomposite films. The results obtained from the experimental design indicated that 3.5 g of CPI.100 g{sup -1}solution, 0.5 g of MMT.100 g{sup -1} solution and 30 g of glycerol.100 g{sup -1} CPI would be the ideal parameters for the development of nanocomposite films by 'casting'. (author)

  13. Evaluation procedure for radioactive waste treatment processes

    International Nuclear Information System (INIS)

    Whitty, W.J.

    1979-11-01

    An aspect of the Los Alamos Scientific Laboratory's nuclear waste management R and D programs has been to develop an evaluation procedure for radioactive waste treatment processes. This report describes the process evaluation method. Process worth is expressed as a numerical index called the Figure-of-Merit (FOM), which is computed using a hierarchial, linear, additive, scoring model with constant criteria weights and nonlinear value functions. A numerical example is used to demonstrate the procedure and to point out some of its strengths and weaknesses. Potential modifications and extensions are discussed, and an extensive reference list is included

  14. Evaluation of nonaqueous processes for nuclear materials

    International Nuclear Information System (INIS)

    Musgrave, B.C.; Grens, J.Z.; Knighton, J.B.; Coops, M.S.

    1983-12-01

    A working group was assigned the task of evaluating the status of nonaqueous processes for nuclear materials and the prospects for successful deployment of these technologies in the future. In the initial evaluation, the study was narrowed to the pyrochemical/pyrometallurgical processes closely related to the processes used for purification of plutonium and its conversion to metal. The status of the chemistry and process hardware were reviewed and the development needs in both chemistry and process equipment technology were evaluated. Finally, the requirements were established for successful deployment of this technology. The status of the technology was evaluated along three lines: (1) first the current applications were examined for completeness, (2) an attempt was made to construct closed-cycle flow sheets for several proposed applications, (3) and finally the status of technical development and future development needs for general applications were reviewed. By using these three evaluations, three different perspectives were constructed that together present a clear picture of how complete the technical development of these processes are

  15. Improving the Process of Student Evaluation

    Directory of Open Access Journals (Sweden)

    Gabriela Neacşu

    2013-12-01

    Full Text Available In this paper we analyzed the process of student evaluation from “Spiru Haret” University. The process under consideration occurs according to a specific Procedure – Process of student evaluation from the Manual of Quality Assurance Procedures, “Spiru Haret” University, Edition 1, 2012. The goal of this procedure, mentioned in the Manual, is to present the student evaluation procedure by using the Blackboard educational platform and other evaluation techniques of quality learning, based on materials developed by teachers of “Spiru Haret” University, as well as corresponding responsibilities, in order to increase the learning process quality and the exigency degree in the examination process, as well as students’ satisfaction measured by accumulated competences. We appreciate that the purpose of this procedure is first and foremost to ensure transparency and objectivity in exam passing decision. After identifying the weaknesses with the “cause - effect” chart, we have sought to improve student evaluation process using PDCA (Plan-Do-Check-Act method, resulting in the design of a new assessment flowchart.

  16. Evaluation of '9{sup 9}Mo presence in eluates of {sup 99}mTc used in nuclear medicine; Avaliacao da presenca de {sup 99}Mo em eluatos de {sup 99m}Tc utilizados em medicina nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Bianca da Silva

    2010-07-01

    Tc-99m is used for diagnostic imaging in nuclear medicine through SPECT technique. It is obtained by the elution of {sup 99}Mo/{sup 99m}Tc generators. During the elution process {sup 99}Mo can be extracted becoming a radionuclidic impurity. One of the quality parameters of the eluate is the radionuclidic purity, MBT (molybdenum break through), defined as the ratio between {sup 99}Mo and {sup 99m}Tc activities in the eluate. The North-American and European pharmacopoeias restrict the {sup 99}Mo content, respectively, in 0.015 e 0.1% and, according to the International Atomic Energy Agency (IAEA), the activity ratio at the moment of administration of the radiopharmaceutical to the patient, should not exceed 0.015%. In Brazil, the control of such parameter is not obliged in official regulations. Thus, the objective of this work is to evaluate the occurrence of {sup 99}Mo in {sup 99m}Tc eluates. It was initially optimized a methodology to determine the activity of {sup 99}Mo in eluate samples. Efficiency curves were obtained for a NaI (Tl) 8'' x 4'' scintillation detector installed at the In Vivo Monitoring Laboratory (LABMIV-IRD). The methodology has been validated through the measurement of a {sup 99}Mo standard liquid source calibrated at the National Metrology Laboratory for Ionizing Radiation (LNMRI-IRD). The samples analyzed in this work were gently supplied by 5 Nuclear Medicine Clinics located in the city of Rio de Janeiro. The activities of {sup 99}mTc and {sup 99}Mo in those samples have been measured respectively at the clinics and at the LABMIV. By applying a standardized methodology, the ration between the activities were calculated. The results show that 147 out of 174 samples presented {sup 99}Mo activities above the minimum detectable activity of the technique. On the other hand, only 2 out of 147 samples surpassed the MBT limit suggested by the IAEA and have been detected in samples eluted from generators of 750 mCi. In one of the

  17. Study radiolabeling of urea-based PSMA inhibitor with 68-Galliu: Comparative evaluation of automated and not automated methods; Estudo de radiomarcacao com Galio-68 do inibidor de PSMA baseado em ureia: avaliacao comparativa de metodo automatizado e nao automatizado

    Energy Technology Data Exchange (ETDEWEB)

    Alcarde, Lais Fernanda

    2016-07-01

    The methods for clinical diagnosis of prostate cancer include rectal examination and the dosage of the prostatic specific antigen (PSA). However, the PSA level is elevated in about 20 to 30% of cases related to benign pathologies, resulting in false positives and leading patients to unnecessary biopsies. The prostate specific membrane antigen (PSMA), in contrast, is over expressed in prostate cancer and founded at low levels in healthy organs. As a result, it stimulated the development of small molecule inhibitors of PSMA, which carry imaging agents to the tumor and are not affected by their microvasculature. Recent studies suggest that the HBED-CC chelator intrinsically contributes to the binding of the PSMA inhibitor peptide based on urea (Glu-urea-Lys) to the pharmacophore group. This work describes the optimization of radiolabeling conditions of PSMA-HBED-CC with {sup 68}Ga, using automated system (synthesis module) and no automated method, seeking to establish an appropriate condition to prepare this new radiopharmaceutical, with emphasis on the labeling yield and radiochemical purity of the product. It also aimed to evaluate the stability of the radiolabeled peptide in transport conditions and study the biological distribution of the radiopharmaceutical in healthy mice. The study of radiolabeling parameters enabled to define a non-automated method which resulted in high radiochemical purity (> 95 %) without the need for purification of the labeled peptide. The automated method has been adapted, using a module of synthesis and software already available at IPEN, and also resulted in high synthetic yield (≥ 90%) specially when compared with those described in the literature, with the associated benefit of greater control of the production process in compliance with Good Manufacturing Practices. The study of radiolabeling parameters afforded the PSMA-HBED-CC-{sup 68}Ga with higher specific activity than observed in published clinical studies (≥ 140,0 GBq

  18. Evaluation of solubility in simulated lung fluid of metals present in the sludge from a metallurgical industry to produce metallic zinc; Avaliacao da solubilidade em liquido pulmonar simulado dos metais presentes no rejeito gerado por uma industria metalurgica de zinco

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Rosilda Maria Gomes de

    2012-07-01

    The objective of this study was to determine the solubility parameters (rapid and slow dissolution rates, rapid and slow dissolution fractions) metal particles present in a pile of sludge accumulated under exposure to weathering from the Cia Mercantil Inga, located at the Ilha da Madeira, Sepetiba Bay, Rio de Janeiro. Plant samples collected in the neighboring of the pile and bioindicators placed in the region and collected after some months indicated that the inhabitants of Ilha da Madeira have been exposed to trace elements such zinc, cadmium, mercury and lead, produced during the processing of zinc minerals (hemimorphite - Zn{sub 4}(OH){sub 2}Si{sub 2}O{sub 7}.H{sub 2}O, and willemite - Zn{sub 2}SiO{sub 4}). A static dissolution test in vitro was used to determine the solubility parameters using a simulated lung fluid (SLF), on a time basis ranging from 10 min to 1 year. The metal concentrations in the sludge samples and in the SLF were determined using Particle Induced X-rays Emission (PIXE). In conclusion, this study confirms the harmful effects on the neighboring population of the airborne particles containing these metals that came from the sludge. The solubility parameters obtained for Zn, Cd, Cr, Ni and Mn present in the rapid dissolution fraction in SLF were 0.945; 0.473; 0.226; 0.300 and 0.497, respectively, and the corresponding times for half life of dissolution of the rapid fraction were f{sub r} = 2.082 days; f{sub r} = 0.09 days; f{sub r} = 0.37 days; f{sub r} = 0.332 days ad f{sub r} = 0.99 days; for the slow dissolution fraction times were f{sub r} = 146.95 days; f{sub r} = 63 days; f{sub r} = 86.64 days; f{sub r} = 79.66 days and f{sub r} = 59.84 days. These values indicate that these metals present a moderate absorption level in SLF, and may be classified as M type, according to the International Commission on Radiological Protection (ICRP). The use of solubility parameters allowed a better description of the kinetic behaviour of the sludge in

  19. Marginal microleakage evaluation in class V composite restorations of deciduous teeth prepared conventionally and using Er:YAG laser; Avaliacao da microinfiltracao marginal em cavidades classe V de dentes deciduos preparados com laser Er:YAG e alta rotacao

    Energy Technology Data Exchange (ETDEWEB)

    Pulga, Neusa Vieira Galvao

    2001-07-01

    The evaluation of marginal microleakage in class V restorations of deciduous teeth prepared using Er:laser and comparison to the ones observed when conventionally prepared, using two photopolimerizable materials, composite resin and glass ionomer cement, was the subject of this study. Twenty eight complete deciduous teeth were divided into four groups Group 1 (G1) prepared with high speed drill + composite resin; Group 2 (G2) prepared with high speed drill + glass ionomer cement; Group 3 (G3) prepared using Er:YAG laser (2.94 {mu}m), 300 mJ, 3 Hz, handpiece 2051, energy density 86 mJ/cm{sup 2} + composite resin; Group 4 (G4) prepared using Er:YAG laser (2.94 {mu}m), 300 mJ, 3 Hz, handpiece 2051, energy density 86 J / cm{sup 2} + glass ionomer cement. After the preparation and restoration the specimens where stored at 37 deg C for 24 hours, thermally stressed, immersed in 50% aqueous solution of silver nitrate for 24 hours while kept in the dark. The specimens were rinsed in water, soaked in photodeveloping solution and exposed to fluorescent light for 6 hours. After this process the samples were sectioned and observed by stereomicroscopy. For comparison the groups were divided into occlusive and cervical microleakage. The results were analysed under the Kruskal-Wallis test. For the occlusive microleakage the statistical significance was 5% among the groups and the average comparison showed higher microleakage for G1 (M=35.1) than for G2 (M=24.0) as well as compared to G3 (M=22.3). The other groups did not present statistical differences among them. For the cervical microleakage the Kruskal-Wallis test did not present any statistical difference. Comparing the occlusive and cervical microleakage data, for every group, using the Wilcoxon test, no statistical differences were observed. Concluding, this study showed the Er:YAG laser to be effective for class V restorations and to result in a smaller microleakage degree using the composite resin. These results indicate

  20. Study on team evaluation. Team process model for team evaluation

    International Nuclear Information System (INIS)

    Sasou Kunihide; Ebisu, Mitsuhiro; Hirose, Ayako

    2004-01-01

    Several studies have been done to evaluate or improve team performance in nuclear and aviation industries. Crew resource management is the typical example. In addition, team evaluation recently gathers interests in other teams of lawyers, medical staff, accountants, psychiatrics, executive, etc. However, the most evaluation methods focus on the results of team behavior that can be observed through training or actual business situations. What is expected team is not only resolving problems but also training younger members being destined to lead the next generation. Therefore, the authors set the final goal of this study establishing a series of methods to evaluate and improve teams inclusively such as decision making, motivation, staffing, etc. As the first step, this study develops team process model describing viewpoints for the evaluation. The team process is defined as some kinds of power that activate or inactivate competency of individuals that is the components of team's competency. To find the team process, the authors discussed the merits of team behavior with the experienced training instructors and shift supervisors of nuclear/thermal power plants. The discussion finds four team merits and many components to realize those team merits. Classifying those components into eight groups of team processes such as 'Orientation', 'Decision Making', 'Power and Responsibility', 'Workload Management', 'Professional Trust', 'Motivation', 'Training' and 'staffing', the authors propose Team Process Model with two to four sub processes in each team process. In the future, the authors will develop methods to evaluate some of the team processes for nuclear/thermal power plant operation teams. (author)

  1. Combined discrete nebulization and microextraction process for molybdenum determination by flame atomic absorption spectrometry (FAAS); Avaliacao da combinacao da nebulizacao discreta e processos de microextracao aplicados a determinacao de molibdenio por espectrometria de absorcao atomica com chama (FAAS)

    Energy Technology Data Exchange (ETDEWEB)

    Oviedo, Jenny A.; Jesus, Amanda M.D. de; Fialho, Lucimar L.; Pereira-Filho, Edenir R., E-mail: erpf@ufscar.br [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Departamento de Quimica

    2014-04-15

    Simple and sensitive procedures for the extraction/preconcentration of molybdenum based on vortex-assisted solidified floating organic drop microextraction (VA-SFODME) and cloud point combined with flame absorption atomic spectrometry (FAAS) and discrete nebulization were developed. The influence of the discrete nebulization on the sensitivity of the molybdenum preconcentration processes was studied. An injection volume of 200 μ resulted in a lower relative standard deviation with both preconcentration procedures. Enrichment factors of 31 and 67 and limits of detection of 25 and 5 μ L{sup -1} were obtained for cloud point and VA-SFODME, respectively. The developed procedures were applied to the determination of Mo in mineral water and multivitamin samples. (author)

  2. Early Phase Process Evaluation: Industrial Practices

    Directory of Open Access Journals (Sweden)

    Zulfan Adi Putra

    2016-09-01

    Full Text Available Process route evaluation is a part of research and development (R&D works in an industrial chemical project life cycle. In this early phase, good process evaluation, including process synthesis and designs, provide guidance’s on the R&D project. The paper aimed to collect practical methods used in this early phase process route evaluation from author’s 10 years of industrial experiences.  The collected methods range from forward-backward process synthesis, functional process design, use of cost estimation, and applications of Monte Carlo simulation. Led by a good project management (e.g. via a stage-gate approach use of these methods have shown beneficial results. Some important results are strong arguments on whether or not the project will continue, as well as relevant technical and economic issues identified during this early phase process synthesis and design. Later on, these issues become guidance’s to the follow-up project, if it is continued.

  3. Development of a methodology for the evaluation of energy efficiency of central irrigation pivots; Desenvolvimento de uma metodologia para a avaliacao da eficiencia energetica de pivos centrais de irrigacao

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Aureo Cezar de [Centro Federal de Educacao Tecnologica de Petrolina (CEFET-Pet), PE (Brazil); Guimaraes Junior, Sebastiao Camargo; Camacho, Jose Roberto; Salerno, Carlos Henrique [Universidade Federal de Uberlandia (NERFAE/UFU), MG (Brazil). Fac. de Engenharia Eletrica. Nucleo de Eletricidade Rural e Fontes Alternativas de Energia

    2006-07-01

    It will be presented in this work a methodology for the evaluation of the energy efficiency of irrigation center systems by central pivot. Integrating water efficiency application with the energy associated to the sprinklers, adduction pipeline, pivot arm and pump systems, the proposed indexes make possible to evaluate the energy income of each component of the irrigation system, contributing for the increase of the global efficiency of the irrigated agriculture. (author)

  4. Student evaluations of the portfolio process.

    Science.gov (United States)

    Murphy, John E; Airey, Tatum C; Bisso, Andrea M; Slack, Marion K

    2011-09-10

    To evaluate pharmacy students' perceived benefits of the portfolio process and to gather suggestions for improving the process. A questionnaire was designed and administered to 250 first-, second-, and third-year pharmacy students at the University of Arizona College of Pharmacy. Although the objectives of the portfolio process were for students to understand the expected outcomes, understand the impact of extracurricular activities on attaining competencies, identify what should be learned, identify their strengths and weaknesses, and modify their approach to learning, overall students perceived the portfolio process as having less than moderate benefit. First-year students wanted more examples of portfolios while second- and third-year students suggested that more time with their advisor would be beneficial. The portfolio process will continue to be refined and efforts made to improve students' perceptions of the process as it is intended to develop the self-assessments skills they will need to improve their knowledge and professional skills throughout their pharmacy careers.

  5. Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas; Sistema de avaliacao de desempenho em radioprotecao das industrias convencionais brasileiras nas areas de medidores nucleares e radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Joyra Amaral dos

    1999-08-01

    This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

  6. Model for qualitative evaluation of risk in ducts through the fuzzy logic in conformity with the methodology of IBR; Modelo para avaliacao qualitativa do risco em oleodutos atraves da logica fuzzy segundo a metodologia da IBR

    Energy Technology Data Exchange (ETDEWEB)

    Mishina, Koje Daniel Vasconcelos [Centro Federal de Educacao Tecnologica da Bahia (CEFET-BA), Salvador, BA (Brazil); Silva, Jose Felicio da; Silva, Joao Bosco de Aquino [Universidade Federal da Paraiba (UFPb), Joao Pessoa, PB (Brazil)

    2006-07-01

    This work considers a system for qualitative evaluation of the terrestrial risk in pipelines, based in the methodology of the Inspection Based on Risk and the Fuzzy Logic. For this one developed a matrix of risk associated with the oil transport and its derivatives, that define the type of tracking and the regularity of inspection with Pig Instrumented in function of the level of risk found in the stretch in study. This matrix of risk considers the probabilities and the consequences associates to the damage for corrosion. The evaluation of the considered system was based on the consistency of the found levels of risk, in relation to that it would be found in the practical one. The gotten results had demonstrated that the use of the methodology of the IBR and the Fuzzy Logic can be used jointly as one sufficiently efficient alternative technique in the evaluation of risk in corroded pipe-lines. (author)

  7. Evaluation of image quality versus doses in service of mammography of Belo Horizonte, MG, BR; Avaliacao da qualidade da imagem versus doses em servicos de mamografia de Belo Horizonte

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, M.; Nogueira, M.S.; Guedes, E. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Seguranca Nuclear; Andrade, M.C. [Superintendencia Estadual de Vigilancia Sanitaria, Belo Horizonte, MG (Brazil); Peixoto, J.E. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Faculdade de Medicina. Radiologia; Silva, V.L.S.; Borges, J.C. [Vigilancia Sanitaria da Secretaria Municipal de Saude de Belo horizonte (VISA/PBH), MG (Brazil)

    2004-07-01

    Cancer is the second cause of death for Brazilian women and breast cancer is the most common neoplasm amongst women. Mammography is an essential tool for diagnosis and early detection of this disease. In order to be effective, the mammography must be of good quality. This study sought to evaluate the radiation protection and quality of 37 services out a total of 82 mammography facilities existing in the city of Belo Horizonte, Brazil. Two instruments were used: a proposed evaluation protocol of the Health Surveillance -VISA and a protocol for evaluation of image quality. Of the 37 services who completed the study, none was achieved 100% conformity in image quality. The results of radiation protection requirements according to the VISA protocol bore close relation to final image quality, a central issue for early cancer detection (p>0.05)

  8. Evaluation of the Nuclear Medicine facilities in Minas Gerais state: quality control program of equipment; Avaliacao dos servicos de Medicina Nuclear do estado de Minas Gerais: programa de controle de qualidade dos equipamentos

    Energy Technology Data Exchange (ETDEWEB)

    Kubo, Tadeu Takao Almodovar; Biancardi, Rodrigo; Rocha, Adriana Marcia Guimaraes; Ferreira, Denia Romao; Silva, Franciele Aquiles Anjos; Assuncao, Jonathan Buenos Aires; Alves, Ederson Henrique; Almeida, Ana Flavia Batista; Alves, Nathalia Fernandes; Xavier, Faber Henrique Zacarias; Gontijo, Rodrigo Modesto Gadelha; Mamede, Marcelo, E-mail: mamede.mm@gmail.com [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN), Belo Horizonte, MG (Brazil); Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento Anatomia e Imagem

    2017-11-01

    With the reformulation of the CNEN-NN-3.05 standard in December 2013, Brazil's Nuclear Medicine (NMS) services have to perform a greater number of quality controls for SPECT and PET equipment. However, little is known about the reality of the quality control programs of these services regarding the application of the new standard. Thus, in this context, the objective of the present study was to evaluate the quality control program of MNSs in the state of Minas Gerais. All NMSs in the state of Minas Gerais were invited to participate in the project. Of these, 34.48% (20 facilities) agreed to participate in the project, 50.00% (29 facilities) did not respond to the invitation and 15.52%(9 facilities) declined their participation. Thus, as of November 2015, 20 SPECT and 2 PET/CT equipment were evaluated for the performance of the quality control tests recommended by the new CNEN standard. The phantoms required for the evaluation came from the Laboratory of Dosimetry and Quality Control of UFMG. Even with the deadlines set by CNEN for the implementation of the quality control program in the NMSs, more than 50% of the evaluated services did not implement the quality controls, and the absence of specific phantoms is the main reason for the failure. Among the problems found in the installations, the most critical were: collimators with no conditions of use in the clinical routine, linearity problems of the evaluated image and values of image uniformity superior to the limits of acceptance. Problems in the uniformity and linearity of the image found directly impacted the performance of other tests, such as spatial resolution, SPECT performance, among others. In a general way, the NMSs in the state of Minas Gerais evaluated with the present study are in clinical feasible conditions. (author)

  9. AGRIFIS - simulator prospecting scenarios and evaluation of projects for production of seeds, in nature oil and castor oil biodiesel; AGRIFIS - simulador de prospeccao de cenarios e avaliacao de projetos de producao de sementes, oleo in natura e biodiesel de mamona

    Energy Technology Data Exchange (ETDEWEB)

    Polizel, L.H.; Tahan, C.M.V.; Pelegrini, M. A.; Soares, B.F. [Universidade de Sao Paulo (ENERQ/USP), SP (Brazil). Centro de Estudos em Regulacao e Qualidade de Energia], Email: cmvtahan@pea.usp.br; Takeno, H.K. [Companhia Energetica de Petrolina (CEP), PE (Brazil); Silva, O.C. da; Monteiro, B.; Velazquez, S.M.S.G. [Universidade de Sao Paulo (CENBIO/USP), SP (Brazil). Centro Nacional de Referencia em Biomassa; Drumond, M.A.; Anjos, J.B. dos [EMBRAPA Semi-Arido - Empresa Brasileira de Pesquisa Agropecuaria (EMBRAPA), Petrolina, PE (Brazil)

    2006-07-01

    This paper presents a model conceived for scenario prospection and project evaluation of small scale castor bean farming, oil extraction and bio diesel production (transesterification) integrated chain. To evaluate the performance of each project the model adopts financial, social and environmental index such as NPV, IRR, SPB, DPB, production costs, family income, number of settled families and employment. The model was implemented in a computational environment, allowing its use as a decision support tool for investments on the castor bean production chain; it calculates the cash flow of the entire project and of each family, including earnings, debts, taxes, interest and amortization. (author)

  10. Evaluation of the social and economical impacts related to the large scale production of bioethanol in Brazil; Avaliacao dos impactos socioeconomicos relacionados a producao em larga escala do bioetanol no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2009-10-15

    The social and economical impacts related to the large scale bio ethanol production have been evaluated considering the replacement of 10% of gasoline equivalent consumption in the world forecasting for the year 2025, evaluating the impacts not only in the sectors directly involved (bio ethanol and sugar cane production), but also taking into account the effects on all production chain of the economy (direct, indirect and induced effects). For this analysis, an income-product model was developed allowing to simulate production gains during the agricultural phase, and to combine different technologies for the production of bio ethanol, for quantification the impacts of the forwarding the second generation technology.

  11. Synthesis of dimeric aryl{beta}-D-galactopyranosides for the evaluation of their interaction with the Erythrina cristagalli lectin; Sintese de {beta}-D-galactopiranosideos de arila dimericos para avaliacao de sua interacao com a lectina de Erythrina cristagalli

    Energy Technology Data Exchange (ETDEWEB)

    Figueiredo, Rute Cunha; Meyer, Nadia Burkowski; Prado, Maria Auxiliadora Fontes; Alves, Ricardo Jose [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Faculdade de Farmacia. Dept. de Produtos Farmaceuticos], e-mail: ricardodylan@farmacia.ufmg.br; Rojo, Javier [Consejo Superior de Investigaciones Cientificas (CSIC), Sevilla (Spain). Inst. de Investigaciones Quimicas. Grupo de Carbohidratos

    2009-07-01

    The synthesis of two new D-galactose-based dimers having a 1,4-butanediamine spacer is reported aiming at the evaluation of their interaction with the Erythrina cristagalli lectin. The title compounds were prepared in four and five steps from 2,3,4,6-tetra-O-acetyl-{beta}-D-galactopyranoside bromide, in 20 % and 15 % overall yield, respectively, using the Doebner modification of the Koenavenagel reaction as the key sep. The lectin-carbohydrate interaction could be evaluated for only one dimer, due to solubility problems. A twofold enhancement of affinity was observed, compared to the corresponding monovalent ligand. (author)

  12. Evaluation of anti-peptidoglycan aptamers labeled with Technetium-99m for in vivo bacterial infection identification; Avaliacao de aptameros anti-peptidoglicano marcados com Tecnecio-99m para identificacao in vivo de infecoes bacterianas

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Ieda Mendes

    2017-07-01

    Aptamers are oligonucleotides that display high affinity and specificity for their molecular targets and are emerging as promising molecules for radiopharmaceuticals development. In a previous work, we selected two aptamers for peptidoglycan (the main constituent of bacterial cell walls) termed Antibac1 and Antibac2. In the present study, the characterization of these aptamers was completed, and the dissociation coefficients (K{sub d}) were determined. The aptamers were further labeled with {sup 99m}Tc and evaluated for bacterial infection diagnosis by scintigraphy. The K{sub d} obtained for Antibac1 was of 0.415 ± 0.047 μM and for Antibac2 of 1.261 ± 0.280 μM. The direct labeling method with {sup 99m}Tc allowed radiolabel yields higher than 90% and the radiolabel stability in saline, plasma and cysteine excess indicated that the process was suitable for labeling of both aptamers. The {sup 99m}Tc-aptamers are prone to bind to plasma proteins: 39.5% ± 2.9% (1 h) and 43.6% ± 1.2% (3 h) for {sup 99m}Tc-Antibac1; 37.6% ± 2.0% (1 h) and 40.9% ± 0% (3 h) for {sup 99m}Tc-Antibac2. The blood clearance half-life for {sup 99m}Tc-Antibac1 was of 41.26 min and for the {sup 99m}Tc-Antibac2 of 31.58 min. The {sup 99m}Tc-Antibac1 in the group infected with S. aureus presented a target/non-target ratio of 2.81 ± 0.67, significantly higher than verified for the {sup 99m}Tc-library (control): 1.52 ± 0.07. In the model with C. albicans infection the target/non-target ratio for {sup 99m}Tc-Antibac1 was 1.46 ± 0.11, similar that obtained for the {sup 99m}Tc-library in the same model: 1.52 ± 0.05. The {sup 99m}Tc-Antibac2 in the group infected with S. aureus showed a target/non-target ratio of 2.61 ± 0.66, statistically higher than achieved for the {sup 99m}Tc-library in the same infection model: 1.52 ± 0.07. In the group infected with C. albicans this ratio for {sup 99m}Tc-Antibac2 was 1.75 ± 0.19, it was significantly higher than verified for the {sup 99m}Tc-library: 1

  13. Evaluation of the environmental equivalent dose rate using area monitors for neutrons in clinical linear accelerators; Avaliacao da taxa de equivalente de dose ambiente utilizando monitores de area para neutrons em aceleradores lineares clinicos

    Energy Technology Data Exchange (ETDEWEB)

    Salgado, Ana Paula; Pereira, Walsan Wagner; Patrao, Karla C. de Souza; Fonseca, Evaldo S. da, E-mail: asalgado@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Batista, Delano V.S. [Instituto Nacional do Cancer (INCa), Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The Neutron Laboratory of the Radioprotection and Dosimetry Institute - IRD/CNEN, Rio de Janeiro, Brazil, initiated studies on the process of calibration of neutron area monitors and the results of the measurements performed at radiotherapy treatment rooms, containing clinical accelerators

  14. Construction of indicators for evaluation of the results of projects under energetic and socio-environmental approach; Construcao de indice para a avaliacao de resultados de projetos sob enfoque energetico e socio-ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Berni, Mauro Donizeti; Leite, Alvaro A.F. [Universidade Estadual de Campinas (NIPE/UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico], e-mail: mauro_berni@yahoo.com.br; Bacellar, Andre Melo; Soares, Luciana R [Agencia Nacional de Energia Eletrica (ANEEL), Brasilia, DF (Brazil); Pego, Bolivar [Instituto de Pesquisa Economica Aplicada (IPEA), Sao Paulo, SP (Brazil)

    2008-07-01

    The establishment and the effective use of sustainability index incorporating variables such as energy, social and environmental, as subsidy to the socket of decision, it has globally been growing. This tool had increased his use, starting from the Conference of the United Nations on Environment and Development (Rio 92) decisions emphasizing the sustainable development. This work, proposes and it demonstrates the validation of a new methodology for evaluation of the results of projects of Research and Development (R and D), for the energy sector and environmental impacts of the implementation of the referred projects. The methodology contemplates the establishment of the Index IRA and the criteria for evaluation of the results of the projects of R and D, under the energy and social and environmental aspects. (author)

  15. Evaluation of the potentiality of the use of high-carbon microsilica as a pozzolanic material; Avaliacao da potencialidade da utilizacao de microssilica de alto teor de carbono como material pozolanico

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, R.L.S.; Pederneiras, C.M.; Costa, T.C.S.; Silva, C.H.R.B., E-mail: ruan_landolfo@hotmail.com [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil); Anjos, M.A.S. [Instituto Federal da Paraiba (IFPB), PB (Brazil); Nobrega, A.K. [Universidade Federal Rural do Semi-Arido (UFERSA), Mossoro, RN (Brazil)

    2016-07-01

    Supplementary Cementitious Materials reduce the production of clinker, which minimizes the environmental impact of cement production and the generation of industrial waste, also improve mechanical behavior and durability. Thus, this article aims to evaluate the potential use of microsilica with high content of carbon as pozzolanic material, based on the requirements of ISO 12653 (ABNT, 2015). The techniques of X-ray fluorescence (XRF), X-ray diffraction (XRD) and compressive strength of mortar of lime and cement (at 7 and 28 days, respectively) were used to evaluate the pozzolanic of the microsilica as a mineral addition. The results indicated that the microsilica has a high amorphous silicon dioxide percentage structure. In the DRX could be possible to analyze the formation of CSH, justifying the good results of mechanical strength, especially with cement. Thus, the mineral admixture used in this research can be considered as a pozzolanic material. (author)

  16. Evaluation of skin entry kerma in radiological examinations at the Hospital de Clinicas, Parana, Brazil; Avaliacao de kerma de entrada na pele em exames radiologicos no Hospital de Clinicas do Parana, Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Porto, Lorena E.; Schelin, Hugo R.; Santos, Amanda C. dos; Bunick, Ana Paula; Paschuk, Sergei; Denyak, Valeriy [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Tilly Junior, Joao G. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Hospital de Clinicas; Khoury, Helen J., E-mail: khoury@ufpe.b [Universidade Federal de Pernambuco (UFPE/DEN), Recife, PE (Brazil). Dept. de Energia Nuclear

    2011-10-26

    This paper evaluates the skin entry dose of pediatric and adults patients when submitted to radiological examinations at the Hospital de Clinicas do Parana, Brazil, as part integrate of the data assessment of International Atomic Energy Agency (IAEA) for Latin America. It was performed measurements of dose for evaluation of skin entry kerma in pediatric patients in thorax AP/PA examinations, adults of thorax in AP/PA, cranio caudal mammography and median lateral and patients of computerized tomography in examination of head, thorax and abdomen. The obtained data demonstrate the necessity of verification of diagnostic analysis standards. The great value amplitudes demonstrate the incompatibility of examination executions with those recommended by the literature. The dose values presented partially inside the range recommended and the other over the expected for the due examination when compared with the literature

  17. Evaluation of oil and grease removal by adsorptive polymeric resins in semi-industrial scale: influence of temperature; Avaliacao da remocao de oleos e graxas por resinas polimericas adsorventes em escala semi-industrial: influencia da temperatura

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Luis F.S. de; Silva, Carla M.F. da; Queiros, Yure G.C.; Lucas, Elizabete F. [Universidade Federal do Rio de Janeiro, Instituto de Macromoleculas, Laboratorio de Macromoleculas e Coloides na Industria de Petroleo, Rio de Janeiro, RJ (Brazil)], e-mail: elucas@ima.ufrj.br

    2011-07-01

    The aim of this study was to evaluate the performance of polymeric resins packed in a fixed bed eluted in semi-industrial scale for oil and greases removal disposed in synthetic oily water in different temperature conditions. For this work, columns packed with vinyl and acryl polymer-base were tested and their efficiency of oil removal was evaluated by fluorimetry technique in two different temperatures: 25 and 60 deg C, in a flow rate condition of 200 mL/min. The experimental results were very good: the removal efficiencies were above 98% in both cases. At 60 deg C, the system keep the efficiency for a longer time: no significant loss in the efficiency was observed after eluting 1,000 times of the column bed volume at 25 deg C and 2,000, at 60 deg C. This result characterizes a great potential of application in the industry. (author)

  18. Hyperbranched polyester: single route synthesis, characterization and evaluation as impact modifier of an epoxy resin; Poliester hiperramificado: sintese por uma rota simples, caracterizacao e avaliacao como modificador de impacto de uma resina epoxi

    Energy Technology Data Exchange (ETDEWEB)

    Miranda, B.H.S.; Sousa, A.R., E-mail: rangel@deii.cefetmg.br [Centro Federal de Educacao Tecnologica de Minas Gerais (DEMAT/CEFET-MG), Belo Horizonte (Brazil). Departamento de Engenharia de Materiais; Alves, A.P.P.; Silva, G.G. [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte (Brazil). Departamento de Quimica. Lab. de Materiais Polimericos Multicomponentes

    2015-07-01

    Two hyperbranched polyesters were obtained using glycerol and adipic acid as monomers, they were characterized through nuclear magnetic resonance ({sup 13}C NMR) to branching degree determination, size exclusion chromatography to molar mass obtention and thermogravimetric analysis (TGA) to evaluate the thermal stability. The polyesters synthesized were added to epoxy resin, at 10% by weight, to evaluate the implication on mechanical properties, impact and stress strain, and thermal (glassy transition temperature - Tg). We observed that rising the synthesis time from 6 to 15,5 hours the degree of branching, molar mass and thermal stability of the polyester increased. The addition of hyperbranched polyesters did not change the mechanical properties of epoxy resin significantly, but the Tg was reduced. (author)

  19. Evaluation of IMRT plans for prostate treatment using energies of 6 MV and 15 MV; Avaliacao de planejamentos de IMRT para tratamento de prostata utilizando energias de 6 MV e 15 MV

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, Lucas Francisco C.; Silva, Murilo C. da; Silveira, Paula J.; Flosi, Adriana A.; Boccaletti, Karina W., E-mail: mcollete@gmail.com [A. C. Camargo Cancer Center, Sao Paulo, SP (Brazil). Servico de Radioterapia

    2013-08-15

    This study aims to evaluate and compare radiotherapy plans with intensity-modulated radiation therapy (IMRT) for prostate cancer treatments optimized for photon energies of 6 MV and 15 MV. We retrospectively evaluated 29 patients with prostate cancer, planned with IMRT technique with prescribed dose of 78 Gy. The initial plan was done for the two photon energies, keeping the same optimization parameters and comparing maximum, minimum and modal PTV doses, conformity and homogeneity indexes, dose gradients, isodoses volumes of 30, 40, 50, 60, and 70 Gy, and the total number of monitor units. It was found that the plans are equivalent regarding higher isodose volumes, conformity and homogeneity indexes, maximum, minimum and modal PTV doses. However, for 6 MV plans there was a considerable increase in both number of monitor units and volume lower isodose volumes, especially the 30 Gy. (author)

  20. Active film of poly(vinyl chloride)/silver: synthesis, characterization and evaluation as antimicrobial active packaging; Filme ativo de poli(cloreto de vinila)/prata: sintese, caracterizacao e avaliacao como embalagem ativa antimicrobiana

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Lilian R.; Rangel, Ellen T.; Machado, Fabricio, E-mail: lilianrodribraga@gmail.com [Universidade de Brasilia (UnB), Brasilia, DF, (Brazil)

    2015-07-01

    The antimicrobial films based on poly(vinyl chloride) (PVC) mediated silver (1, 2, 4 and 8 wt%) were evaluated as antimicrobial active packaging using the casting method. The structure of the active films was characterized by SEM, EDX-XRF, XRD, FTIR and TG. FTIR spectra confirmed the PVC-Ag interaction due to the presence of new bands at 1745 cm{sup -1} and 1165 cm{sup -1} bands, which are absent in the PVC control. The FRX-EDX spectrum confirmed the presence of silver ions in all the films. TG and SEM results showed that the increased concentration of silver provided an improved thermal stability and presence of pores in the active films, respectively. Antimicrobial activity was evaluated by disk diffusion method for Bacillus subtilis, Fusarium solani and Apergillus niger, which proved the efficiency of the films active. (author)

  1. Qualitative evaluation of environmental radiological impact in a phosphate associated uranium conventional mine: Santa Quiteria Project, CE, Brazil; Avaliacao qualitativa do impacto radiologico ambiental em uma mineracao convencional de fosfato com uranio associado: o Projeto Santa Quiteria

    Energy Technology Data Exchange (ETDEWEB)

    Reis, Rocio G. dos; Santo, Aline Sa E., E-mail: rocio@ird.gov.br, E-mail: alinesah@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2013-07-01

    The aim of this study is to identify and evaluate qualitatively the main potential sources of mineral and installation terms of Santa Quiteria, CE, Brazil, evaluating their possible impacts on the environment. The key terms sources in the production of phosphoric acid are usually: the dig of the mines, tailings dams and phospho plaster stack. Thus, this work intends to inform the academic community about this issue, as well as the population in general and also, acting proactively in order to warn about the possible environmental impacts, so that actions to compensate, minimize or avoid these radiological impacts on the environment, can be included in the planning of the industrial mineral project of Santa Quiteria (author)

  2. Evaluation of the maximum energy achieved through generation of hydro and wind power in the Northeast subsystem; Avaliacao da maxima energia assegurada atraves de geracao hidro-eolica no subsistema do Nordeste

    Energy Technology Data Exchange (ETDEWEB)

    Campos, Pedro T.; Teixeira, Marcos A.; Kissel, Johannes [Gesellschaft Fuer Technische Zusammenarbeit (GTZ) (Germany)

    2010-07-01

    In the current context to encourage sustainable development, wind energy plays an important role in the spread of renewable energy sources. In this paper, the possibilities and difficulties of wind power integration in large-scale are evaluated, specifically in the northeastern region of Brazil. From the seasonal complementarity with the water source, scenarios are set out where the maximum participation of only these two sources in the energy supply of the region is sought. Aiming to evaluate the possibilities of a completely sustainable regional energy supply, the northeast subsystem is isolated, excluding, in principle, imports and exports. Therefore, the energy storage capacity of reservoirs in the region is used as a key factor, combined with the seasonal availability of data sources and the annual energy consumption of the region. (author)

  3. Preliminary evaluation of the utilization of biopiles technology to the bioremediation of the soil of Guamare/RN (Brazil); Avaliacao preliminar da aplicacao da tecnologia de biopilhas para a biorremediacao do solo de Guamare/RN (Brasil)

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Edmilson P.; Macedo, Gorete R.; Duarte, Marcia M.L. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Engenharia Quimica; Costa, Alex S.S. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2004-07-01

    The aim of this work was to evaluate the use of biopiles to the bioremediation of the soil of Stabilization Station of Guamare-RN-Brazil. The evaluation was performed by the characterization of the soil, tests of biodegradation in laboratory scale and by the use of a complete 2{sup 3} factorial design with triplicate at the central point. The input variables were: Nitrogen concentration; diesel-oil concentration; and inoculum concentration. The response variable was the percentage gravimetric loss of organic matter. Statistical analyses of the main factors and their interactions on the response variable were performed using contour curves and Pareto obtained from the software STATISTICA for Windows, Release 5.5. The results showed that biopiles technology can be used to remediate eventual contaminated areas in that region. (author)

  4. Synthesis and evaluation of copolymer based on cardanol and styrene on the stability of asphaltenes; Sintese e avaliacao de copolimero a base de cardanol e estireno sobre a estabilidade dos asfaltenos

    Energy Technology Data Exchange (ETDEWEB)

    Loureiro, Tatiana S.; Spinelli, Luciana S., E-mail: tatianaloureiro@ima.ufrj.br [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Instituto de Macromoleculas

    2015-07-01

    The destabilization of asphaltenes in crude oil mainly happens due to variations in pressure, temperature and oil composition, causing significant losses. Polymers containing specific groups can be used as asphaltenes stabilizers and thus, avoid your precipitation, or as asphaltenes flocculants to assist the removal of suspended particles in a particular oil. The monitoring of asphaltenes precipitation is usually evaluated by tests with variation in stability of asphaltenes in function of adding a flocculant solvent. In this work, it was evaluated the influence of a synthesized copolymer based on cardanol and styrene on the stability of asphaltenes. The stability of asphaltenes was monitored by precipitation tests induced by a flocculant agent (n-heptane), using an ultraviolet-visible (UV-Vis) spectrometer. The structural characterization of copolymer was performed by FTIR and {sup 1}H NMR. The results showed that copolymer can act as asphaltene flocculant. (author)

  5. Chemical composition and evaluation of allelopathic potentials of Adiantum tetraphyllum Humb.and Bonpl. Ex. Willd (Pteridaceae); Constituintes quimicos e avaliacao do potencial alelopatico de Adiantum tetraphyllum Humb. and Bonpl. Ex. Willd (Pteridaceae)

    Energy Technology Data Exchange (ETDEWEB)

    Melos, Jorge L.R. [Colegio Militar de Campo Grande, MS (Brazil). Secao de Ensino ' C' ; Silva, Luciana B.; Peres, Marize T. L. P.; Mapeli, Ana M.; Faccenda, Odival; Anjos, Hatino H.; Torres, Thais G.; Tiviroli, Soraia C.; Batista, Ana L.; Almeida, Felipe G. N.; Flauzino, Natasha S.; Tibana, Leticia A.; Hess, Sonia C. [Universidade Federal de Mato Grosso do Sul, Campo Grande, MS(Brazil). Dept. de Hidraulica e Transportes; Honda, Neli K. [Universidade Federal de Mato Grosso do Sul, Campo Grande, MS (Brazil). Dept. de Quimica]. E-mail: schess@nin.ufms.br

    2007-03-15

    Chemical studies of green leaves of A. tetraphyllum afforded {beta}-sitosterol, a mixture containing the ethyl esters of long chain carboxylic acids, 30-normethyl-lupan-20-one, hopan-22-ol, phytol, phyten-3(20)-1,2-diol, quercetin and quercetin-3-O-{beta}-D-glucoside. The structures of the compounds were elucidated by spectroscopic and GC analysis. The allelopathic potentials of the crude ethanolic extract and fractions were evaluated against Lactuca sativa (letuce) and Allium cepa (onion) seeds. (author)

  6. Use of the 3DVH Software as a complementary method of IMRT pretreatment evaluation; Utilizacao do Software 3DVH como metodo complementar de avaliacao de pre-tratamento de IMRT

    Energy Technology Data Exchange (ETDEWEB)

    Lyra, Jesse G.P.; Bruning, Fabio F.; Funchal, Melissa; Toledo, Hugo V.; Bornatto, Pricila; Fernandes, Tatiane C.O., E-mail: jesse_lyra@hotmail.com [Hospital Erasto Gaertner / Liga Paranaense de Combate ao Cancer (LPCC), Departamento de Radioterapia, Curitiba, PR (Brazil)

    2013-04-15

    The aim of this study is to compare the method of treatment planning evaluation for IMRT using the gamma index to the method of the 3DVH Software. The 3DVH Software was used with the MapCheck2 detector 2D array under a 6MV x-ray beam of linear accelerator equipped with 120 leafs MLC. Nine treatment plans of prostate patients chose randomly and fully anonimatize were performed in the Eclipse planning system, using the AAA calculation algorithm in IMRT sliding window technique. These plans were approved and treated according to the gamma analysis criteria of the institution. The comparisons were made in absolute dose and normalized at maximum dose for each field and then with the 3DVH Software the Dmax, Dmean, D15%, D25%, D35% and D50% parameters for the bladder and rectum, Dmean for the bulb, Dmax for the femur and D95% for the PTV were evaluated. In the planar analysis by field, the plans studied had a minimum of 97.5% approval. The PTV-related differences have relative variation from 1.3 to 2.2%, that is, greater coverage than expected for this structure. For the organs at risk, the relative differences observed were between -5.3 to 25.8%, which could result in a non-approved plan if these variations are close to the clinical tolerances of the OAR. The results show that even a plan compatible with greater than or equal to 95% of the points, the gamma analysis does not give enough information if this plan can or cannot be approved for treatment and that there is a need for more detailed verification of the plan which considers not only the planar evaluation, but also the evaluation of the DVH measured, and the 3DVH Software proved be adequate for this analysis. (author)

  7. Evaluation of ambient radiation levels in positron emission tomography/computed tomography in microPET/CT laboratory; Avaliacao dos niveis de radiacao ambiental no laboratorio de tomografia por emissao de positrons acoplada a tomografia computadorizada, microPET/CT

    Energy Technology Data Exchange (ETDEWEB)

    Sarmento, Daniele Martins

    2016-11-01

    Micro PET/CT scanner is an essential tool generally used for small animal molecular imaging. Fluorine-18-labeled fluorodeoxyglucose is the most widely used radioisotope in this technique. The present study aimed to evaluate the radiation levels in a micro PET/CT research laboratory of the Radiopharmacy Center at IPEN-CNEN / SP, in order to accomplish both national standards and international recommendations. The radioprotection team has classified the laboratory as supervised area; even this laboratory does not require the adoption of specific measures for protection and safety, should be done regular re-evaluation of the conditions of occupational exposures. Workplace monitoring and individual control assessment were carried out to ensure the radiological protection of all workers directly involved in handling the scanner. Initially, there was conducted a radiometric survey, as well as measurements of the external radiation level in the workplace and its surroundings. To achieve this goal, there were placed nine thermoluminescent dosimeters of CaSO{sub 4}:Dy in preselected locations. Monthly evaluations of the occupationally exposed individuals were carried out through the use of TL dosimeters, ported in the workers' chest. Moreover, whole body measurements were performed every six months. The study period was about two-years which started in April 2014. All tests to evaluate micro PET/CT performance were based on the standard protocol of the equipment in accordance with the standard developed by the Animal PET Standard Task Force. Present study's results demonstrated that the ambient radiation levels (ambient and effective estimated radiation dose), as well as the effective shielding equipment are both adequate. This study emphasizes that it is essential to strictly follow the principles of radioprotection in workplace, whenever researches involve radioactive unsealed sources. (author)

  8. An evaluation approach for alarm processing improvement

    International Nuclear Information System (INIS)

    Kim, Jung-Taek; Lee, Dong-Young; Hwang, In-Koo; Park, Jae-Chang

    1997-01-01

    In light of the need to improve MMIS of NPPs, the advanced I and C research team of KAERI has embarked on developing an Alarm and Diagnosis-Integrated Operator Support System, called ADIOS, to filter or suppress unnecessary or nuisance alarms and diagnose abnormality of the plant process. ADIOS has been built in an object-oriented AI environment of G-2 expert system software tool, as presented in a companion paper. ADIOS then is evaluated according to the plan in three steps; (1) preliminary tests to refine the knowledge base and inference structure of ADIOS in such a dynamic environment, and also to evaluate the appropriateness of alarm-processing algorithms; (2) to ensure correctness, consistency, and completeness in the knowledge base using COKEP (Checker Of Knowledge base using Extended Petri net); and (3) the cognitive performance evaluation using the Simulation Analyzer with a Cognitive Operator Model (SACOM) in the KAERI's Integrated Test Facility (ITF). (author). 5 figs, 1 tab

  9. Evaluation of porous vitreous carbon or silicon implants by radiology in rat's skull; Avaliacao radiologica de implantes de carbono vitreo poroso ou silicone em cranio de ratos

    Energy Technology Data Exchange (ETDEWEB)

    Vaccari-Mazzetti, Marcelo Paulo; Kobata, Celio Toshiro [Lusiada University of Santos, SP (Brazil). Hospital Defeitos da Face. Dept. of Surgery]. E-mail: mmgvaccari@ig.com.br; Fabiani, Paulo [Lusiada University of Santos, SP (Brazil). Dept. of Radiology; Martins, Dulce Maria Fonseca Soares [Universidade Federal de Sao Paulo (UNIFESP/EPM), SP (Brazil). Dept. of Surgery. Div. of Plastic Surgery; Gomes, Paulo de Oliveira [Universidade Federal de Sao Paulo (UNIFESP/EPM), SP (Brazil). Dept. of Surgery. Div. of Operatory Technique and Experimental Surgery; Martins, Jose Luiz [Universidade Federal de Sao Paulo (UNIFESP/EPM), SP (Brazil). Dept. of Surgery. Div. of Pediatric Surgery

    2008-07-01

    Purpose: Evaluate by CT the use of porous vitreous carbon (PVC) and silicon (S) implants as the replacement bone in the craniofacial skeleton of rats. Methods: 40 rats divided in: Group A (n=20) PVC submitted to the implant of a fragment in skull. After the euthanasia, the animals were divided into two subgroups: A I: 10 animals, studied in the 7th postoperative day (P.O) and AII: 10 animals, studied in the 28th P.O. In group B, S, 20 rats were submitted to S implant in the skull. All other steps were identical to group A, with designation of subgroups BI and BII. CT with beams in axial cuts of 1 mm thickness to obtain 3-D information It was used Hounsfield scale for evaluate the radio density of the implant. They were used non parametric tests to analyze the results. Results: The 7th PO boss remained in the two groups, but for 28th PO, observed reduction in the volume of the implant in Group A, not observed in group B. CT studies noticed different radio densities around all of S prostheses (pseudo capsule), that do not appeared in CPV implants. The S has remained unchanged in the CT, but the CPV has had a modification in its radio density (p{<=}0,05), in all implants. Conclusion: In CT evaluation the implants of CPV have greater deformation that the S, which makes them not suitable for replacement of membranous bone in the rat skull. (author)

  10. Evaluation of capital investment in thermoelectric generation projects in the Brazilian electric sector using the real options theory; Avaliacao de investimento de capital em projetos de geracao termoeletrica no setor eletrico brasileiro usando teoria das opcoes reais

    Energy Technology Data Exchange (ETDEWEB)

    Castro, Alessandro de Lima

    2000-04-01

    In the Brazilian Electric System about 92% of the generated electricity is of hydraulic origin. Today the system is operating practically in the limit of your capacity. Solutions of short time to make possible the expansion of the offer of electricity generation go by the installation of cycle combining thermal using natural gas as fuel. In this dissertation, it was used the real options theory to evaluate generation assets in the Brazilian electricity sector. In Brazil, central operator dispatches a flexible thermal when the electricity spot price is larger than the operation costs. The operation decision is like an European call, where underlying asset is the electricity and the strike price is the operation cost. The value of the capacity is the sum of all decisions to operate the thermal unit, in the remaining life of unit. It was used Monte Carlo Simulation and Dynamic Programming to evaluate this model. The problem is divided in two parts. In the first part, the base case is fixed and evaluated and the expected NPV and project risk are calculated in function of contract level. In the second part, many sensibilities are done in relation to base case. At the end, the value of flexibility is calculated for each contract level. (author)

  11. Electricity cogeneration evaluation from cane bagasse in gasifier systems/gas turbine; Avaliacao da cogeracao de eletricidade a partir de bagaco de cana em sistemas de gaseificador/turbina a gas

    Energy Technology Data Exchange (ETDEWEB)

    Coelho, Suani Teixeira

    1992-07-01

    Before the beginning of PROALCOOL in 1975, the first effective program in the world using biomass in large scale as an automotive fuel, sugar/alcohol industries already used sugar cane bagasse - a by-product of sugar/alcohol production - to generate energy for sugar production. Currently, besides the fact that they are self-sufficient in thermal/electrical energy, sugar/alcohol industries produce small electricity excess which is exported to local utilities. Gasifier/gas turbine systems are more advanced technologies which are being developed and shall be commercialized in eight to ten years approximately, presenting much higher efficiency, at low cost and inducing more exportable electricity. In this study, possibilities of gasifier/gas turbine systems are evaluated and projections of bagasse based electricity production are presented, until year 2010, for Sao Paulo state and Brazil. Generation costs of gasified bagasse based electricity are calculated: they shall be lower than electricity cost from fossil origin. Influence of electricity sale on the reduction of alcohol production cost are also evaluated for several opportunity costs of bagasse. Environmental and social impacts are analyzed, including evaluation of the cost of avoided carbon, related to the substitution of fossil fuel by sugar cane bagasse in thermoelectric power plants. (author)

  12. Clinicoradiologic evaluation of styloid process calcification

    International Nuclear Information System (INIS)

    Bagga, Mun Bhawni; Kumar, C. Anand; Yeluri, Garima

    2012-01-01

    This study was performed to investigate the prevalence, morphology, and calcification pattern of the elongated styloid process in the Mathura population and its relation to gender, age, and mandibular movements. The study analyzed digital panoramic radiographs of 2,706 adults. The elongated styloid process was classified with the radiographic appearance based on the morphology and calcification pattern. The limits of mandibular protrusion were evaluated for each subject. The data were analyzed by using a Student's t-test and chi-squared test with significance set at p=0.05. Bilateral elongation having an 'elongated' type styloid process with a 'partially mineralized' pattern was the most frequent type of styloid process. No correlation was found between styloid process type and calcification pattern on the one hand and gender on the other, although elongated styloid was more prevalent in older and male populations (p 0.05). Dentists should recognize the existence of morphological variation in elongated styloid process or Eagle syndrome apparent on panoramic radiographs. We found higher prevalence of elongated styloid process in the population of the Mathura region when compared with other Indian populations. The calcification of the styloid process was more common in the older age group with no correlation to gender, mandibular movement and site. 'Type I' with a 'partially calcified' styloid process was observed more frequently in the population studied.

  13. Materials evaluation for a transuranic processing facility

    International Nuclear Information System (INIS)

    Barker, S.A.; Schwenk, E.B.; Divine, J.R.

    1990-11-01

    The Westinghouse Hanford Company, with the assistance of the Pacific Northwest Laboratory, is developing a transuranium extraction process for preheating double-shell tank wastes at the Hanford Site to reduce the volume of transuranic waste being sent to a repository. The bench- scale transuranium extraction process development is reaching a stage where a pilot plant design has begun for the construction of a facility in the existing B Plant. Because of the potential corrosivity of neutralized cladding removal waste process streams, existing embedded piping alloys in B Plant are being evaluated and ''new'' alloys are being selected for the full-scale plant screening corrosion tests. Once the waste is acidified with HNO 3 , some of the process streams that are high in F - and low in Al and zr can produce corrosion rates exceeding 30,000 mil/yr in austenitic alloys. Initial results results are reported concerning the applicability of existing plant materials to withstand expected process solutions and conditions to help determine the feasibility of locating the plant at the selected facility. In addition, process changes are presented that should make the process solutions less corrosive to the existing materials. Experimental work confirms that Hastelloy B is unsatisfactory for the expected process solutions; type 304L, 347 and 309S stainless steels are satisfactory for service at room temperature and 60 degrees C, if process stream complexing is performed. Inconel 625 was satisfactory for all solutions. 17 refs., 5 figs., 8 tabs

  14. Evaluation of the nanoparticle treatment effect on the development of nanocomposite resin epoxy/kaolinite;Avaliacao do efeito do tratamento da nanoparticula no desenvolvimento de nanocomposito resina epoxi/caulinita

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Tharsia C.C.; Mendonca, Rannier M., E-mail: tharsia@gmail.co [Universidade Federal do Rio Grande do Norte (PPGCEM/UFRN), Natal (Brazil). Programa de Pos-Graduacao em Ciencia e Engenharia de Materiais; Ito, Edson N; Melo, Jose D.D.; Paskocimas, Carlos A., E-mail: ito@ufrnet.b [Universidade Federal do Rio Grande do Norte (DEMat/UFRN), Natal (Brazil). Dept. de Engenharia de Materiais

    2009-07-01

    The nanocomposites formed from polymer matrices and mineral clays have been studied since the decade of 60s when Blumstein demonstrated the intercalation the polymer molecules between lamellae of montmorillonite. The application of the kaolinite in nanocomposite polymeric is rare, however the kaolinite is expandable and it is possible to do the process of the superficial functionalization. The present work demonstrates that after leaching process of the kaolinite through a chemical treatment with hydrogen peroxide combined with acid solutions the kaolinite inside presents a surface activated with good resulted of dispersion of a polymers matrix by a mechanical agitation, in high-energy mill. The samples had been characterized by x-ray diffraction, thermogravimetry (TGA) and transmission electron microscopy (TEM). The results showed the potential of using the functionalized kaolinite as an agent of reinforcement in polymer nanocomposites. (author)

  15. Evaluation of the influence of water and oil derivatives absorption on PVC pipes; Avaliacao da influencia da absorcao de agua e de derivados de petroleo em tubulacoes de PVC

    Energy Technology Data Exchange (ETDEWEB)

    Carpio, D.C.F. del; D' Almeida, J.R.M., E-mail: dalmeida@puc-rio.b [Pontificia Univ. Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil). Dept. de Engenharia de Materiais

    2010-07-01

    PVC is the only polymer of large consume that is not totally obtained from petroleum, since it contains 57% of chlorine. As chlorine containing materials are resistant to bacteria rich environments, such as buried pipes, PVC is being used for fluid transportation, principally water, but it can also be considered as an alternative material for the transportation of other fluids. This work analyzes the aging behavior of PVC exposed to water, ethanol and diesel oil, using TGA, DSC, FT-IR and DR-X techniques. The results showed that the chemical structure of PVC is not affected by exposure to water and ethanol. For these fluids a dipolar interaction could be occurring, increasing at the beginning of the absorption process, the polymer thermal stability. The diesel oil caused plasticization, with reduction of the Tg since the beginning of the aging process. (author)

  16. Evaluation of toxicity and removal of color in textile effluent treated with electron beam; Avaliacao da toxicidade e remocao da cor de um efluente textil tratado com feixe de eletrons

    Energy Technology Data Exchange (ETDEWEB)

    Morais, Aline Viana de

    2015-07-01

    The textile industry is among the main activities Brazil, being relevant in number of jobs, quantity and diversity of products and mainly by the volume of water used in industrial processes and effluent generation. These effluents are complex mixtures which are characterized by the presence of dyes, surfactants, metal sequestering agents, salts and other potentially toxic chemicals for the aquatic biota. Considering the lack of adequate waste management to these treatments, new technologies are essential in highlighting the advanced oxidation processes such as ionizing radiation electron beam. This study includes the preparation of a standard textile effluent chemical laboratory and its treatment by electron beam from electron accelerator in order to reduce the toxicity and intense staining resulting from Cl. Blue 222 dye. The treatment caused a reduction in toxicity to exposed organisms with 34.55% efficiency for the Daphnia similis micro crustacean and 47.83% for Brachionus plicatilis rotifer at a dose of 2.5 kGy. The Vibrio fischeri bacteria obtained better results after treatment with a dose of 5 kGy showing 57.29% efficiency. Color reduction was greater than 90% at a dose of 2.5 kGy. This experiment has also carried out some preliminary tests on the sensitivity of the D. similis and V. fischeri organisms to exposure of some of the products used in this bleaching and dyeing and two water reuse simulations in new textile processing after the treating the effluent with electron beam. (author)

  17. Clinical and morphologic evaluation of Er:YAG laser action at the front of cervical dentinal hypersensitivity; Avaliacao clinica e morfologica da acao do laser de Er:YAG frente a hipersensibilidade dentinaria cervical

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Dalva Maria

    2001-07-01

    This work was achieved in vivo and in vitro to evaluate the efficiency of Er:YAG laser in the cervical dentinal hypersensitivity treatment (HSDC). The Clinical study was achieved in patients with HSDC. The treatment was realized in five sessions: the first for selection, the second for exams (clinic and X-Ray) and trying to remove the etiologic factors that could cause the HSDC. The third and fourth sessions were subjected to the radiation with that protocol: 60 mJ energy ,2 Hz frequency, 6 mm out of focus, under air cooling, 20 seconds each application which the same was repeated four times with one minute breaks, which scanning movements and without using anaesthetics. The fifth was evaluation. The patients were evaluated and registered in a subject scale of pain 0 to 3, in the beginning and end of each session of irradiation, and one month after the last session. The results showed that for the irradiated group occurs significant differences in the beginning of each session and between. For the control group did not occur significant differences in the beginning and after each session, but did show a difference between the sessions. As the control group as the irradiated group, had reduction of sensibility between the session. For the morphologic study nine teeth were selected, 7 molars and 2 pre-molars from operative dentistry discipline. Half of the surface was irradiated with Er:YAG laser, the same protocol used in vivo, and the other half was used as a control without receiving any laser irradiation. Subsequently, specimens were prepared for SEM examinations. The results showed that laser treated surfaces showed a reduction of dentine tubular diameter with partial or total closure of the dentine tubules. For the control group, it was observed bigger amounts smear layer and open dentine tubular. The results obtained indicated that the Er:YAG laser can contribute to the HSDC treatment. (author)

  18. Strategic environmental evaluation of natural gas - SEA/NG: a management tool for development of a environmental conservation policy; Avaliacao ambiental estrategica para o gas natural - AAE/GN: instrumento de gestao do desenvolvimento para uma politica de conservacao ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Comar, Vito; Turdera, Mirko Valenzuela; Silva, Paulo Souza; Benedetti Filho, Edemar; Santiago, Etenaldo Felipe; Costa, Fabio Edir dos Santos [Universidade Estadual do Mato Grosso do Sul (UEMS), Campo Grande, MS (Brazil). Centro de Analise e Monitoramento Ambiental do Gas Natural (GASLAB); Moretti, Edvaldo; Oliveira, Jorge Eremites de; Sciamarelli, Alan; Freitas Filho, Jose Daniel de; Vieira, Maria Helena Pereira [Universidade Estadual do Mato Grosso do Sul (UEMS), Campo Grande, MS (Brazil); Soares, Afranio Jose Soriano [UNESP, Rio Claro, SP (Brazil); Oliveira, Henrique de; Comunello, Eder [EMBRAPA, Dourados, MS (Brazil). Centro de Pesquisas Agropecuaria do Oeste (CPAO); Freire, Luiz G.M. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The methodology for a Strategic Environmental Evaluation of Natural Gas - SEA/NG incorporates within the analysis of the project the socio-cultural, economic, energetic and environmental implications of the transformations, due to the adoption of natural gas, in the area of influence of gas pipelines and gas-powered thermo-electric plants. It was based on the case study of a gas pipeline planned to reach the city of Dourados from Campo Grande, capital of the Brazilian State of Mato Grosso do Sul, which implied the construction of a thermoelectric plant in Dourados. The SEA/NG: 1. Defines the best alternative track for gas pipelines; 2. Proposes location alternatives for gas-powered thermo-electric plants; 3. Evaluates the cumulative and synergic effects of human activities in the socio-environmental aspects; 4. Studies the dynamics of regional development; 4. Supports urban planning decisions in cities housing gas-powered thermo-electric plants; 5. Proposes a System of Analysis and Environmental Monitoring for Natural Gas. Qualitative-quantitative matrixes were used to evaluate the cumulative and synergic effects of the adoption of natural gas within the regional energy matrix, determine the best alternative track for the gas pipeline proposed from Campo Grande to Dourados, and to identify the best location for a gas-powered thermo-electric plant. The matrixes integrated the areas of geology, hydrology, ecology and socio-economics issues both in the phases of construction and operation of the pipeline. Diagrams and interactive conceptual models were also used to synthesize the principal components involved in the choice of the best gas pipeline alternative track. This project received financial grants from PETROBRAS, MSGAS, TBG and FINEP. (author)

  19. Evaluation of multiple scan average dose (MSAD) levels in computerized tomography in Minas Gerais state, Brazil; Avaliacao dos niveis de dose media em cortes multiplos (MSAD) em tomografia computadorizada no estado de Minas Gerais

    Energy Technology Data Exchange (ETDEWEB)

    Alonso, Thessa C., E-mail: alonso@cdtn.br [Centro de Desenvolvimento de Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Vieira, Leandro de A.; Barbosa, Nayra V.; Oliveira, Jeyselaine R. de; Cesar, Adriana C.Z. [Secretaria de Vigilancia Sanitaria de Minas Gerais, Belo Horizonte, MG (Brazil); Silva, Teogenes A. da [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Departamento de Engenharia Nuclear. Programa de Ciencias e Tecnicas Nucleares

    2014-07-01

    Computed Tomography (CT) grows every year and is a diagnostic method that has revolutionized radiology with advances in procedures for obtaining image. However, the indiscriminate use of this method generates relatively high doses in patients. The diagnostic reference levels (DRLs) is a practical tool to promote the evaluation of existing protocols. The optimization and the periodic review of the protocols are important to balance the risk of radiation. The present study aims to conduct a survey of levels of MSAD of Minas Gerais following the procedures recommended by current Brazilian law. (author)

  20. Evaluation of the protection behaviour of reinforcement steel against corrosion induced by chlorides in reinforced mortar specimens; Avaliacao do comportamento frente a corrosao pelo ataque de cloreto de argamassa armada apos varios tratamentos protetores

    Energy Technology Data Exchange (ETDEWEB)

    Crivelaro, Marcos

    2002-07-01

    In this work various treatments for protecting reinforcing steels against corrosion induced by chlorides have been evaluated. Additives to mortars and surface treatments given to reinforcing steels were evaluated as corrosion protection measures. In the preliminary tests the corrosion resistance of a CA 50 steel treated by immersion in nearly 50 different solutions, was determined. The solutions were prepared with tannins (from various sources) and/or benzotriazole, and during immersion, a surface film formed on the steel. The corrosion resistance of the coated steels was evaluated in a saturated Ca(OH){sub 2} solution with 5% (wt) NaCl. Preliminary tests were also carried out with mortars reinforced with uncoated steel to which tannin or lignin was added. Two organic coatings, a monocomponent and a bicomponent type, formulated specially for this investigation, with both tannin and benzotriazole, were also tested in the preliminary tests to select the coating with better corrosion protection property. The bicomponent type (epoxy coating) showed better performance than the monocomponent type coating, and the former was therefore chosen to investigate the corrosion performance on CA 50 steel inside mortar specimens. From the preliminary tests, two solutions with tannin from two sources, Black Wattle (Acacia mearnsii) and Brazilian tea (Ilex paraguariensis St. Hill), to which benzotriazole and phosphoric acid were added, were chosen. Mortar specimens reinforced with CA50 steel treated by immersion in these two solutions were prepared. Also, epoxy coated CA50 steel was tested as reinforcement inside mortar specimens. Mortars reinforced with uncoated CA50 steel were also prepared and corrosion tested for comparison. The effect of tannin and lignin as separate additives to the mortar on the corrosion resistance of uncoated steel was also studied. The reinforced mortar specimens were tested with various cycles of immersion for 2 days in 3.5% (wt) NaCl followed by with air

  1. Evaluation of radiochemistry purity and p H of radiopharmaceuticals in nuclear medicine services at Pernambuco, Brazil; Avaliacao da pureza radioquimica e pH de radiofarmacos em servicos de medicina nuclear de Pernambuco, Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Wellington; Lima, Fabiana Farias de, E-mail: falima@cnen.gov.b [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil); Santos, Poliane A.L.; Lima, Fernando Roberto de Andrade; Lima, Fabiana Farias de, E-mail: fflima@cnen.gov.b [Centro Regional de Ciencias Nucleares (CRCN-NE/CNEN-PE), Recife, PE (Brazil)

    2011-07-01

    Radiopharmaceuticals are cellular or molecular structures that have a radionuclide in its composition and they are used for diagnosing or treating diseases. The evaluation of the radiochemical purity of radiopharmaceuticals is essential to produce images with artifacts free, as well as avoid unnecessary absorbed dose to the patient. Since they are administered in humans is important and necessary that they undergo rigorous quality control. Due to this fact, the norm in ANVISA RDC 38/2008 declaring the mandatory completion of a minimum of tests in routine nuclear medicine services before human administration. (author)

  2. Proficiency tests for evaluation of the {sup 99}Tc{sup m} measurements in the nuclear medicine; Aplicacao de teste de proficiencia para avaliacao da medicao de {sup 99}Tc{sup m} na medicina nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Iwahara, Akira; Tauhata, Luiz; Oliveira, Antonio Eduardo de, E-mail: iwahara@ird.gov.b, E-mail: tauhata@ird.gov.b, E-mail: aedu@ird.gov.b [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Nicoli, Ieda Gomes, E-mail: ieda@ird.gov.b [Comissao Nacional de Energia Nuclear (CNEN/DF), Brasilia, DF (Brazil). Escritorio de Brasilia; Alabarse, Frederico Gil; Xavier, Ana Maria, E-mail: falabarse@ird.gov.b, E-mail: axavier@ird.gov.b [Comissao Nacional de Energia Nuclear (ESPOA/CNEN-RS), Porto Alegre, RS (Brazil). Escritorio de Porto Alegre

    2009-07-01

    This work performs the performance evaluation of 55 Brazilian nuclear medicine services in activity measurement of radiopharmaceutical containing {sup 99}Tc{sup m}. Proficiency tests based on the acceptance criteria of the Regulation ISO/IEC Guide 43-1 and on the accuracy of the brazilian Regulation CNEN-NN-3.05 were applied in 63 results of activity measurements in radionuclide calibrators used by those services. The performance services has shown that the criteria of the ISO/IEC 43-1, nevertheless to be more restrictive, presents results very consistent with the accuracy criteria requested by the Brazilian regulation

  3. The refractometry use in the evaluation of type 'C' gasoline non-conformities; Uso da refratometria na avaliacao de nao conformidades da gasolina tipo 'C'

    Energy Technology Data Exchange (ETDEWEB)

    Santos, K.M.; Andrade, J.M.; Severiano, M.L.; Medeiros, M.A.O.; Fernandes, N.S.; Fernandes, V.J. [Rio Grande do Norte Univ., Natal, RN (Brazil)]. E-mail: klecia.morais@bol.com.br

    2003-07-01

    The need of the creation of practical and efficient methods that can monitor the quality of the automotive fuels it is an important factor, because they should evaluate the physical-chemical properties of the fuels to guarantee your conformity. To determine these parameters of conformity, several regulars analyses are done in the gasoline type 'C', as the distillation and content of ethyl alcohol (AEAC). However, the present work has as objective uses the refractometry in the forecast of irregularities in the gasoline trying to establish a faster and efficient analysis method. (author)

  4. Evaluation of the price volatility of short-term in Brazil and its relation with the thermal generation; Avaliacao da volatilidade do preco de curto prazo no Brasil e sua relacao com a geracao termica

    Energy Technology Data Exchange (ETDEWEB)

    Heideier, R.B.; Prado, F.A.A.; Saidel, M.A.; Ueocka, M.Z. [Universidade de Sao Paulo (EPUSP), SP (Brazil). Escola Politecnica. Dept. de Energia e Automacao Eletricas], E-mails: fernando@sinerconsult.com.br, saidel@pea.usp.br, marcos.ueocka@poli.usp.br

    2009-07-01

    This article evaluate the intensity of volatility of the electric power prices in the short term market in selected countries. It were analyzed historical series of monthly prices of major energy markets worldwide, with assessment of the energy matrix of each region. The study, by analysis of data entry program for optimizing the operation of the SIN (NEWAVE and DECOM), concludes that the price volatility in short-term in Brazil is marked by the large variation of thermal power available, especially the lack of natural gas.

  5. Evaluation gamma radiation in composite sisal fiber- polyurethane derived of castor oil by bending test; Avaliacao da influencia da radiacao gama em compositos de fibra de sisal - poliuretano derivado de oleo de mamona atraves de ensaios de flexao

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Felipe H. de; Geraldo, Ricardo R.; Vasco, Marina C.; Azevedo, Elaine, E-mail: helunica@yahoo.com.br [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Claro Neto, Salvador [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Instituto de Quimica

    2015-07-01

    Materials used for making furniture and accessories or positioning in X -ray examination rooms should not exhale volatile organic compounds and are resistant to ionizing radiation. One solution is the use of vegetable fiber and polyurethane composites of vegetable origin, since they are biodegradable, derived from renewable raw materials and have no volatile organic compounds. The main difficulty in developing this material is fiber adhesion with the polymer. The objective of this study is to evaluate the mechanical properties of composite sisal fiber composite, without further treatment, and polyurethane derived from castor oil, with a dose of 25 kGy gamma radiation, subjected to 3 points bending tests. (author)

  6. Evaluation exposure to the ionizing radiation of workers during the operation of first Brazilian uranium mine; Avaliacao da exposicao de trabalhadores a radiacao ionizante durante a operacao da primeira mina de uranio do Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Wagner de S.; Oliveira, Sergio Q. de; Py Junior, Delcy de A.; Dantas, Marcelino V.A.; Silva, Ana Claudia A.; Garcia Filho, Oswaldo, E-mail: wspereira@inb.gov.b, E-mail: sergioquinet@inb.gov.b, E-mail: delcy@inb.gov.b, E-mail: marcelino@inb.gov.b, E-mail: anasilva@inb.gov.b, E-mail: ogarcia@inb.gov.b [Industrias Nucleares do Brasil (UTM/INB), Pocos de Caldas, MG (Brazil). Unidade de Tratamento de Minerios. Servico de Radioprotecao

    2011-10-26

    The production of uranium in Brazil initiated, in industrial scale, in the year of 1982, in the Miner-Industrial Complex at Pocos de Caldas, Minas Gerais, Brazil. This paper analysed the data of 13410 individual historic of dose, registered along the years of work, bay the radioprotection service of installation. Descriptive statistics and frequency histograms based on dose historic, and the annual distribution doses and the accumulated doses were evaluated during the functioning period of the CIPC, and his adequacy to the in force legislation at the time of it operation

  7. Evaluation of the efficiency of silicone polyether additives as foam inhibitor in crude oil; Avaliacao da eficiencia de aditivos a base de silicone polieter como inibidores de espuma em petroleo

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This work evaluates the chemical and physico-chemical properties of commercial anti-foam products based on silicone polyethers along with their efficiency in inhibiting foaming. The commercial surfactants were characterized by nuclear magnetic resonance (NMR) spectroscopy, size exclusion chromatography (SEC), determination of solubility in different solvents and measurement of the surface and interfacial tensions. A method to test the formation of foam in oil was used to mimic the operating conditions in gas-oil separators. The results show that the most polar additive was the most efficient in breaking up the foam. (author)

  8. Preliminary evaluation of the protocol scintigraphy of neuroendocrine tumor with metaiodobenzylguanidine (mIBG) labeled with {sup 123}I; Avaliacao preliminar do protocolo de cintilografia de tumores neuroendocrinos com meta-iodobenzilguanidina (mIBG) marcado com {sup 123}I

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Danillo M. [Hospital de Urgencia de Sergipe Gov. Joao Alves Filho, Aracaju, SE (Brazil); Mendes, Janaina Dutra Silvestre, E-mail: danillo_90@hotmail.com [Instituto Nacional de Cancer Jose Alencar Gomes da Silva, Rio de Janeiro, RJ (Brazil). Setor de Medicina Nuclear

    2014-04-15

    Neuroendocrine tumors have a property of capturing metaiodobenzylguanidine (mIBG) and because of this is possible to perform scintigraphy for diagnosis marking this molecule with {sup 123}I. However, {sup 123}I has some particularities, such as the release of X-ray low energy, which complicates the measurement of activity by activity meter, moreover emits a significant intensity of high energy gamma radiation, damaging the image quality. The acquisition protocol scintigraphy of neuroendocrine tumor was evaluated and the necessary recommendations for its optimization will be studied to ensure image quality with the least possible expense to the patient. (author)

  9. Experimental evaluation of the performance and emissions of diesel engines using blends of crude castor oil and diesel; Avaliacao experimental do desempenho e emissoes de motores diesel usando misturas de oleo de mamona e oleo diesel

    Energy Technology Data Exchange (ETDEWEB)

    Pimentel, Valeria Said de Barros; Pereira, Pedro Paulo [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. de Engenharia Mecanica; Belchior, Carlos Rodrigues Pereira [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Dept. de Engenharia Oceanica

    2004-07-01

    This work refers to the experimental evaluation of diesel generators operating with blend of crude castor oil and diesel. Performance and emissions tests were accomplished in a diesel engine of direct injection. Because of the high viscosity of the blend a device was installed on the engine in order to lower the blend viscosity. A comprehensive analysis of the results obtained in these tests indicates the possibility of use of the blend of castor oil and diesel as fuel for diesel-generators, with modifications introduced in the engines. (author)

  10. Evaluation of X ray radiation doses in pediatric examinations of cranial computerized tomography based on optimization studies; Avaliacao das doses de radiacao X em exames pediatricos de tomografia computadorizada de cranio com base em estudos de otimizacao

    Energy Technology Data Exchange (ETDEWEB)

    Daros, Kellen Adriana Curci

    2005-07-01

    This paper identifies the technical conditions for CT examination which offers lowest absorbed dose and to attend the manufacturer recommendations as far the spatial resolution is concerned. The paper evaluates the absorbed dose during cranial CT in up to 6 years children satisfying the technical condition recommended by the manufacturer and routine clinical conditions. The paper also established a quantitative relationship among the absorbed dose and its distribution in the cranial regions of pediatric patients up to 6 years old in a way to estimate the doses subject to optimized conditions

  11. Evaluation of control strategies in forming processes

    Directory of Open Access Journals (Sweden)

    Calmano Stefan

    2015-01-01

    Full Text Available Products of forming processes are subject to quality fluctuations due to uncertainty in semi-finished part properties as well as process conditions and environment. An approach to cope with these uncertainties is the implementation of a closed-loop control taking into account the actual product properties measured by sensors or estimated by a mathematical process model. Both methods of uncertainty control trade off with a financial effort. In case of sensor integration the effort is the cost of the sensor including signal processing as well as the design and manufacturing effort for integration. In case of an estimation model the effort is mainly determined by the time and knowledge needed to derive the model, identify the parameters and implement the model into the PLC. The risk of mismatch between model and reality as well as the risk of wrong parameter identification can be assumed as additional uncertainty (model uncertainty. This paper evaluates controlled and additional uncertainty by taking into account process boundary conditions like the degree of fluctuations in semi-finished part properties. The proposed evaluation is demonstrated by the analysis of exemplary processes.

  12. Preliminary evaluation of alternative waste form solidification processes. Volume II. Evaluation of the processes

    International Nuclear Information System (INIS)

    1980-08-01

    This Volume II presents engineering feasibility evaluations of the eleven processes for solidification of nuclear high-level liquid wastes (HHLW) described in Volume I of this report. Each evaluation was based in a systematic assessment of the process in respect to six principal evaluation criteria: complexity of process; state of development; safety; process requirements; development work required; and facility requirements. The principal criteria were further subdivided into a total of 22 subcriteria, each of which was assigned a weight. Each process was then assigned a figure of merit, on a scale of 1 to 10, for each of the subcriteria. A total rating was obtained for each process by summing the products of the subcriteria ratings and the subcriteria weights. The evaluations were based on the process descriptions presented in Volume I of this report, supplemented by information obtained from the literature, including publications by the originators of the various processes. Waste form properties were, in general, not evaluated. This document describes the approach which was taken, the developent and application of the rating criteria and subcriteria, and the evaluation results. A series of appendices set forth summary descriptions of the processes and the ratings, together with the complete numerical ratings assigned; two appendices present further technical details on the rating process

  13. Preoperative evaluation of cytologically indeterminate thyroid nodules with {sup 18}F-FDG PET; Avaliacao pre-operatoria com PET-{sup 18}F-FDG de nodulos de tireoide com citologia indeterminada

    Energy Technology Data Exchange (ETDEWEB)

    Sebastianes, Fernando M.; Zanoni, Patricia H.; Tomimori, Eduardo K.; Camargo, Rosalinda Y. A. de; Pereira, Maria Adelaide A. [Universidade de Sao Paulo (HCFMUSP), SP (Brazil). Faculdade de Medicina. Hospital das Clinicas. Div. de Endocrinologia]. E-mail: fernandosebastianes@gmail.com; Cerci, Juliano J.; Soares Junior, Jose; Meneghetti, Jose Claudio [Universidade de Sao Paulo (USP), SP (Brazil). Hospital das Clinicas. Div. de Medicina Nuclear

    2008-10-15

    The aim of this article is to discuss the role of {sup 18}F-FDG Positron Emission Tomography (PET) in the preoperative evaluation of patients with cytologically indeterminate thyroid nodules. All studies with patients with thyroid cancer were selected to the calculation of sensitivity. Only studies aiming to evaluate patients with thyroid nodules whose cytological result was indeterminate were selected to establish the specificity. The finding of focal {sup 18}F-FDG uptake at PET was associated with the presence of thyroid malignancy in most of the studies. The sensitivity of the exam to the detection of thyroid malignancy was extremely high, but the specificity varied from 0 to 66%. In our experience, the specificity was 39%. In conclusion, the studies suggest that {sup 18}F-FDG PET can reduce the number of unnecessary thyroidectomies performed in patients with cytologically indeterminate thyroid nodules. However, the relatively high percentage of false positive results, the high costs, the low availability of this exam in developing countries and the low clinical experience still restrict the use of {sup 18}F-FDG PET when recommended with this aim. (author)

  14. Evaluation of different X ray equipment and incubators for pediatric radiographic images implementation;Avaliacao de diferentes equipamentos de raios-X e incubadoras para implementacao de imagens radiograficas pediatricas

    Energy Technology Data Exchange (ETDEWEB)

    Carbi, E.D.O.; Souza, R.T.F.; Pina, D.R. [UNESP, Botucatu, SP (Brazil). Faculdade de Medicina. Dept. de Doencas Tropicais e Diagnostico por Imagem

    2009-07-01

    The children frequent/y are exposed to the ionizing radiation and other emotional and physical risks in the attempts repeated to get radiographic images of quality. This study it has as objective to evaluate X ray beam about quality and intensity at three different equipment with single-phase generator of voltage and the absorption factors to 5 different incubators and 3 different cradles in the neonatal UTI of the Clinics Hospital on the Medicine College in Botucatu. The methodology consisted of carrying through measured of half Layer Value and Radiation output for the different X ray equipment with voltage with in between 45 and 100 kVp, applied at the X ray tube. The measures of the absorption factors had been carried through varying the thicknesses of attenuating material (phantom) for the different voltage value with in between 50 and 100kVp. The results had shown the same energy effective for the different X ray equipment and the same absorption factors for the different incubators and evaluated cradles, taking into account, the same thickness of attenuating material and same voltage. (author)

  15. Market evaluation and investment planning in natural gas industry in Brazil: development of the net distribution pipeline; Avaliacao de mercado e planejamento de investimentos na industria de gas natural no Brasil: perspectivas de crescimento da malha de gasodutos de distribuicao

    Energy Technology Data Exchange (ETDEWEB)

    Avila, Pedro L.; Pamplona, Edson O. [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

    2008-07-01

    This paper proposes to develop a real options model to decision-making investments in flexible technologies. As a result, finding a closed-form solution, derived from the partial differential equation of the value of flexibility provided by alternative fuels. However, you can present and analysis the results of a practical application using the method to solve real options problems known as binomial model. Initially presents a brief explanation on the method of discounted cash flow, its failures and changes to the real options analysis. In the sequence chart an overview of the natural gas industry on Brazil, emphasizing the need for consistent investments evaluations in the sector. The next section shows the proposed development of mathematical model for assessing the flexibility to choose, obtained by the exchange of fuel for transport of gas pipeline distribution of natural gas. The model takes as the case scenario where the flexible pipeline can carry both natural gas and hydrogen, and the evaluation of the option of exchanging input gives more value to the investment opportunity, and consider the optimum conditions where the option to be exercised. Keywords: Decision Making, Real Options; Natural Gas, Flexible Technology. (author)

  16. Evaluation of the of thermal shock resistance of a castable containing andalusite aggregates by thermal shock cycles; Avaliacao da resistencia ao dano por choque termico por ciclagem de um concreto refratario contendo agregados de andaluzita

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, G.C.R.; Santos, E.M.B.; Ribeiro, S., E-mail: girribeiro@yahoo.com.br [Universidade de Sao Paulo (DEMAR/EEL/USP), Lorena, SP (Brazil). Escola de Engenharia de. Departamento de Engenharia de Materiais; Resende, W.S. [Industrias Brasileiras de Artigos Refratarios (IBAR), Lorena, SP (Brazil); Rodrigues, J.A. [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil)

    2011-07-01

    The thermal shock resistance of refractory materials is one of the most important characteristics that determine their performance in many applications, since abrupt and drastic differences in temperature can damage them. Resistance to thermal shock damage can be evaluated based on thermal cycles, i.e., successive heating and cooling cycles followed by an analysis of the drop in Young's modulus occurring in each cycle. The aim of this study was to evaluate the resistance to thermal shock damage in a commercial refractory concrete with andalusite aggregate. Concrete samples that were sintered at 1000 deg C and 1450 deg C for 5 hours to predict and were subjected to 30 thermal shock cycles, soaking in the furnace for 20 minutes at a temperature of 1000 deg C, and subsequent cooling in circulating water at 25 deg C. The results showed a decrease in Young's modulus and rupture around 72% for samples sintered at 1000 ° C, and 82% in sintered at 1450 ° C. The refractory sintered at 1450 deg C would show lower thermal shock resistance than the refractory sintered at 1000 deg C. (author)

  17. Evaluation of some oral postradiotherapy sequelae in patients treated for head and neck tumors; Avaliacao de algumas sequelas bucais pos-radioterapia em pacientes tratados de neoplasias de cabeca e pescoco

    Energy Technology Data Exchange (ETDEWEB)

    Rubira, Cassia Maria Fischer; Devides, Nadia Juliana; Ubeda, Liliane Torsani; Lauris, Jose Roberto; Rubira-Bullen, Izabel Regina Fischer; Damante, Jose Humberto [University of Sao Paulo, Bauru, SP (Brazil). School of Dentistry. Stomatology Dept.; Bortolucci Junior, Antonio Geraldo [Amaral Carvalho Hospital, Jau, SP (Brazil)]. E-mail: damante@fob.usp.br

    2007-07-01

    The aim of this study was to evaluate the oral sequelae of radiotherapy in patients treated between 1999 and 2003 for head and neck tumors. One-hundred patients (24 women, 76 men) ranging in age from 30 to 83 years (mean 59.2 years) were examined. Time since radiotherapy ranged from 1 to 72 months (mean 28 months). The total mean radiation dose received by the patients was 5,955 cGy. The evaluation protocol included anamnesis, intraoral and extraoral examination, measurement of stimulated salivary flow and salivary pH. Symptoms reported by the patients included dry mouth (68%), dysphagia (38%), and dysgeusia (30%). In 64% of the patients, the mean stimulated salivary flow rate was less than 0.7 ml/min. The mean salivary pH was 6.97 ({+-} 0.714). Stimulated salivary flow increased with increasing postradiotherapy time (p < 0.05). The prevalence of mucositis was associated with higher radiation doses (p < 0.05), and the prevalence of atrophic candidiasis was related to a longer post-treatment period (p < 0.05). Two cases of recurrence of the primary tumor were detected during the study. The main effect of radiotherapy in the head and neck region was a reduction of the salivary flow rate, even though our study demonstrated that there was a modest late improvement of the salivary flow. (author)

  18. In vitro evaluation of the chemical and morphological changes of the enamel surface using different bleaching techniques; Avaliacao in vitro das alteracoes quimica e morfologica da superficie do esmalte utilizando diferentes tecnicas de clareamento dental

    Energy Technology Data Exchange (ETDEWEB)

    Mattos, Alessandra de Siervi

    2003-07-01

    'In vitro' evaluation through MEV and EDS of the morphological and chemical changes, respectively, of the bovine enamel, submitted to different bleaching techniques. For the MEV evaluation eighteen apical thirds were pigmented and divided into two parts. One half of each sample was the control and the other half was bleached according to the protocol of each test group (n= 6). Group I - home bleaching with a 10% carbamide peroxide; group II bleaching with 35% hydrogen peroxide and LED; group III - bleaching with 35% hydrogen peroxide with diode laser bleaching. The same procedure was done with the eighteen samples which were analyzed through EDS and which had their buccal surface grinded and polished before the bleaching procedure in order to obtain more precise values of the fraction of calcium and phosphorus. The results showed no morphological changes among the analyzed control halves and the bleached halves. There was not a statistical significant difference about Ca and P values, among the control halves and the bleached halves regarding the chemical components (p< 0,05). (author)

  19. Evaluation of fracture toughness in dental ceramics using indentation and SEVNB (Single Edge V-Notched Beam)-method; Avaliacao da tenacidade a fratura de ceramicas dentarias atraves do metodo de entalhe - SEVNB (Single Edge V-Notched Beam)

    Energy Technology Data Exchange (ETDEWEB)

    Santos, L.A.; Santos, C.; Souza, R.C.; Ribeiro, S. [Universidade de Sao Paulo (DEMAR/EEL/USP), Lorena, SP (Brazil). Escola de Engenharia de Lorena. Dept. de Engenharia de Materiais. Polo Urbo-Industrial; Strecker, K. [Universidade Federal de Sao Joao del-Rei (DME/UFSJ), MG (Brazil). Dept. de Materiais Eletricos; Oberacker, R. [Karlsruhe Univ. (Germany)

    2009-07-01

    In this work, the fracture toughness of different ceramics based on Al{sub 2}O{sub 3} and ZrO{sub 2} were evaluated using, comparatively two methods, Vickers indentation and SEVNB (Single Edge V-Notched Beam) method. Al{sub 2}O{sub 3}, ZrO{sub 2}(3%Y{sub 2}O{sub 3}) micro-particled and ZrO{sub 2}(3%Y{sub 2}O{sub 3}) nanometric, ZrO{sub 2}-Al{sub 2}O{sub 3} and Al{sub 2}O{sub 3}-ZrO{sub 2} composites were sintered at different temperatures. Samples were characterized by relative density, X-ray diffraction, SEM, and mechanical evaluation by hardness, bending strength and fracture toughness obtained by ickers indentation and SEVNB-method. The results were presented comparing the densification and microstructural results. Furthermore, the advantages and limitations of each method were discussed. (author)

  20. Evaluation of operational and energetic performances of combine harvesters in soybean (Glycine max (L.) Merril) crop; Avaliacao dos desempenhos operacional e energetico de colhedoras na cultura de soja (Clycine max (L) Merril)

    Energy Technology Data Exchange (ETDEWEB)

    Mazetto, Flavio Rielli [UNESP, Botucatu, SP (Brazil). Faculdade de Ciencias Agronomicas. Curso de Pos-Graduacao em Energia na Agricultura; Lancas, Kleber Pereira [UNESP, Botucatu, SP (Brazil). Faculdade de Ciencias Agronomicas. Dept. de Engenharia Rural

    2009-07-01

    The objective of the present study consisted of evaluating three soybean combine harvesters, the first one with 7.62 m width header, 176.4 kW engine power and 7,200 L grain tank size, the second one with 7.01 m width header, 161.7 kW engine power and 6,700 L grain tank size and the third one with 6.71 m width header, 165.4 kW engine power and 6,000 L grain tank size with its respective mechanisms actuators, to identify the most efficient system in rationalization energy demand and operational performance. The combine harvest test was done at Igreja Velha farm, Tibagi/Parana State and the data analysis were done at FCA-UNESP, Campus de Botucatu/SP (Sao Paulo State University - Botucatu). The fuel consumption evaluation was made through the use of fluxometer in normal combine operation conditions and for the operational performance was determined all the running machine times. The combine with wider grain header, higher grain tank capacity, bigger engine power, rotary separator in the separation system and self-leveling sieves showed greater operational performance and less fuel consumption than the others combines tested. (author)

  1. Dosimetric evaluation of spectrophotometric response of alanine gel solution for gamma, photons, electrons and thermal neutrons radiations; Avaliacao dosimetrica da resposta espectrofotometrica da solucao gel de alanina para radiacao gama, de fotons, de eletrons e de neutrons termicos

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Cleber Feijo

    2009-07-01

    Alanine Gel Dosimeter is a new gel material developed at IPEN that presents significant improvement on Alanine system developed by Costa. The DL-Alanine (C{sub 3}H{sub 7}NO{sub 2}) is an amino acid tissue equivalent that improves the production of ferric ions in the solution. This work aims to analyse the main dosimetric characteristics this new gel material for future application to measure dose distribution. The performance of Alanine gel solution was evaluated to gamma, photons, electrons and thermal neutrons radiations using the spectrophotometry technique. According to the obtained results for the different studied radiation types, the reproducibility intra-batches and inter-batches is better than 4% and 5%, respectively. The dose response presents a linear behavior in the studied dose range. The response dependence as a function of dose rate and incident energy is better 2% and 3%, respectively. The lower detectable dose is 0.1 Gy. The obtained results indicate that the Alanine gel dosimeter presents good performance and can be useful as an alternative dosimeter in the radiotherapy area, using MRI technique for tridimensional dose distribution evaluation. (author)

  2. Magnetic resonance imaging in the evaluation of standard radiotherapy field borders in patients with uterine cervix cancer;Ressonancia magnetica para avaliacao dos limites dos campos classicos de radioterapia em pacientes portadoras de neoplasia maligna de colo uterino

    Energy Technology Data Exchange (ETDEWEB)

    Freire, Geison Moreira; Dias, Rodrigo Souza; Giordani, Adelmo Jose; Segreto, Helena Regina Comodo; Segreto, Roberto Araujo, E-mail: segreto.dmed@epm.b [Universidade Federal de Sao Paulo (UNIFESP-EPM), SP (Brazil). Unit of Radioterapy; Ribalta, Julisa Chamorro Lascasas [Universidade Federal de Sao Paulo (UNIFESP-EPM), SP (Brazil). Dept. de Gynecology

    2010-05-15

    Objective: to evaluate, by means of magnetic resonance imaging, the standardized field borders in radiotherapy for malignant neoplasm of uterine cervix, and to determine the role of this method in the reduction of possible planning errors related to the conventional technique. Materials and methods: magnetic resonance imaging studies for planning of treatment of 51 patients with uterine cervix cancer were retrospectively analyzed. The parameters assessed were the anterior and posterior field borders on sagittal section. Results: The anterior field border was inappropriate in 20 (39.2%) patients and geographic miss was observed in 37.3% of cases in the posterior border. The inappropriateness of both field borders did not correlate with clinical parameters such as patients' age, tumor staging, histological type and degree. Conclusion: the evaluation of standardized field borders with the use of magnetic resonance imaging has demonstrated high indices of inappropriateness of the lateral field borders, as well as the relevant role of magnetic resonance imaging in the radiotherapy planning for patients with uterine cervix cancer with a view to reduce the occurrence of geographic miss of the target volume. (author)

  3. In vitro evaluation of the chemical and morphological changes of the enamel surface using different bleaching techniques; Avaliacao in vitro das alteracoes quimica e morfologica da superficie do esmalte utilizando diferentes tecnicas de clareamento dental

    Energy Technology Data Exchange (ETDEWEB)

    Mattos, Alessandra de Siervi

    2003-07-01

    'In vitro' evaluation through MEV and EDS of the morphological and chemical changes, respectively, of the bovine enamel, submitted to different bleaching techniques. For the MEV evaluation eighteen apical thirds were pigmented and divided into two parts. One half of each sample was the control and the other half was bleached according to the protocol of each test group (n= 6). Group I - home bleaching with a 10% carbamide peroxide; group II bleaching with 35% hydrogen peroxide and LED; group III - bleaching with 35% hydrogen peroxide with diode laser bleaching. The same procedure was done with the eighteen samples which were analyzed through EDS and which had their buccal surface grinded and polished before the bleaching procedure in order to obtain more precise values of the fraction of calcium and phosphorus. The results showed no morphological changes among the analyzed control halves and the bleached halves. There was not a statistical significant difference about Ca and P values, among the control halves and the bleached halves regarding the chemical components (p< 0,05). (author)

  4. The implementation and evaluation of physical protection system of the IEA-R1 reactor; Implementacao e avaliacao do sistema de protecao fisica do reator IEA-R1

    Energy Technology Data Exchange (ETDEWEB)

    Vaz, Antonio Carlos Alves

    2016-11-01

    The September 11, 2001 terrorist attacks in New York, the accident at the Fukushima nuclear power plant on March 2011 and the recent attacks in Paris on November 2015 are examples of events that justify the efforts of the International Agency of Energy Atomic - IAEA to improve security at nuclear facility. The Brazilian government has been collaborating with this project and investing resources to improve the Physical Protection System - PPS of the nuclear research reactor system, technically is associated with the elements of detection, delay and response. The PPS is an integrated system of people, equipment and procedures used to protect nuclear facilities and radioactive sources against threat, theft or sabotage. The PPS works to avoid, to mitigate or to minimize the consequences caused by these actions. This study evaluates the PPS of the reactor, identifying the vulnerabilities and suggesting ways to improve the system effectiveness. The analyses were based on the methodology developed by Sandia National Laboratories´ security experts in Albuquerque - USA, allowing the system evaluation through hypothetical and probabilistic analyzes; identifying threats, determining the targets and analyzing the possible adversaries paths. From the methodology adopted was obtained the value around 40% for PE indicator, which shows the need to improve the system to minimizing the vulnerabilities. (author)

  5. Development of methodology for evaluation of {sup 99m}Tc and {sup 131}I incorporated activities during lactation; Desenvolvimento de metodologia para avaliacao da atividade de {sup 99m}Tc e {sup 131}I em lactantes

    Energy Technology Data Exchange (ETDEWEB)

    Santos, L. [Universidade Federal do Rio de Janeiro (IF/UFRJ), RJ (Brazil). Inst. de Fisica; Dantas, A.L.A.; Mesquita, S.A. [Universidade Federal do Rio de Janeiro (IF/UFRJ), RJ (Brazil). Inst. de Fisica; Oliveira, S.M.V., E-mail: adantas@ird.gov.br, E-mail: silvia@ird.gov.br [Universidade Federal do Rio de Janeiro (IF/UFRJ), RJ (Brazil). Inst. de Fisica; Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Dosimetria

    2012-07-01

    Internal contamination of babies may occur for milk ingestion or inhalation of mothers occupationally exposed to ionizing radiation with possible incorporation or mothers submitted to medical exposures during lactation. Radionuclide concentrations in the mother's milk may cause organ absorbed doses in the babies proportionally to the breast volumes. Milk analysis allow to determine activities ingested by the babies by determining the peak of mother's milk considering the decrease of the activity rate and the milk activities drunk at different time intervals. The work had the aim to develop simulators and methodology to evaluate {sup 99m}Tc and {sup 131}I in lactation, in the following steps: to prepare standard solution of contaminated milk separately with {sup 99m}Tc and {sup 131}I; to build four breast simulators (600 g and 800 g) and respective calibration for two geometries (breast and whole-body) in the Whole-Body Counter Unit in Instituto de Radioprotecao e Dosimetria. The results demonstrated the system efficiency to determine {sup 99m}Tc and {sup 131}I activities in breasts during the lactation period. The methodology for positioning in the 'breast geometry' seemed to be more efficient than the 'whole-body geometry' for different breast volumes. The experiment allows achieving better evaluation of internal dosimetry of mothers and their young children. (author)

  6. Evaluation of radiological protection and dose of skin entrance in paediatric dentistry examinations; Avaliacao da protecao radiologica e da dose de entrada na pele em exames de odontologia pediatrica

    Energy Technology Data Exchange (ETDEWEB)

    Khoury, Helen Jamil [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear; Vasconcelos, Flavia Maria Nassar de [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil); Silveira, Marcia Maria Fonseca da [Universidade de Pernambuco (UPE), Recife, PE (Brazil). Fac. de Odontologia; Couto, Geraldo Bosco Lindoso [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Fac. de Odontopediatria; Brasileiro, Izabela Vanderley

    2005-07-01

    In this work the radiological protection conditions and dose at the entrance of pediatric patients undergoing dental intraoral radiographs were evaluated. The study was conducted in two clinics of the dentistry course at the Federal University of Pernambuco, Recife, PB, Brazil, equipped with conventional X-ray apparatus, with 60 and 70 kV. 254 exams of 113 patients between the ages of 3 to 12 years were evaluated. The skin entrance dose was estimated using TLD-100 thermoluminescent dosemeters. During the examination were also recorded information regarding the time of exposure, radiographic technique used, use of thyroid protectors and lead apron, angle and distance of the cone Locator to the patient's skin. The results showed that the input skin doses ranged from 0.3 mGy to 10mGy. The lead apron was used in 71% of exams while the thyroid shield was only used in 58% of the exams. The exposure times ranged from 0,5s to 1,5s. From the results it can be concluded that the radiological procedures are not optimized and that in some cases the patient dose is high.

  7. Evaluation of the partial volume effect in the activity quantification in PET/CT images; Avaliacao do efeito de volume parcial na quantificacao de atividade em imagens de PET/CT

    Energy Technology Data Exchange (ETDEWEB)

    Krempser, Alexandre R., E-mail: krempser@peb.ufrj.br [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil). Instituto Alberto Luiz Coimbra. Programa de Engenharia Biomedica; Oliveira, Silvia M. Velasques de [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Almeida, Sergio A. de [Hospital Samaritano, Rio de Janeiro, RJ (Brazil). Centro de Imagens PET/CT

    2012-08-15

    The aim of this work was to evaluate the influence of partial volume effect (PVE) in the quantification of activity in images of a PET-CT scanner and its ability to identify lesions. Recovery coefficients were calculated using a phantom containing 12 cylinders with diameters between 4 and 30 mm and a National Electrical Manufactures Association scattering phantom, both fillable with known concentrations of {sup 18}F. The images were acquired for acquisition time of 3 and 5 minutes, and cylinder to background ratio of n=8:1 and n=4:1. The recovery coefficients were calculated between 0.01 and 0.91 depending on the diameter. Significant variations were not found in function of image acquisition parameters. Errors in the activity quantification above 70% were found for cylinders with diameters smaller than 10 mm. The cylinders with diameters smaller than 8 mm were not identified in the images. The phantoms were adequate for PVE evaluation in the PET/CT images. The PVE had the greatest impact on the cylinders with diameters of 6 and 4 mm. It's necessary to use partial volume correction techniques in the images in order to increase the quantitative accuracy of the studied equipment. (author)

  8. Evaluation of area monitor response for neutrons in radiation field generated by a 15 MV clinic accelerator; Avaliacao da resposta dos monitores de area para neutrons em campo de radiacao gerado por um acelerador clinico de 15 MV

    Energy Technology Data Exchange (ETDEWEB)

    Salgado, Ana Paula

    2011-07-01

    The clinical importance and usage of linear accelerators in cancer treatment increased significantly in the last years. Coupled with this growth came the concern about the use of accelerators with energies over to 10 MeV which produce therapeutic beam contaminated with neutrons generated when high-energy photons interact with high-atomic-number materials such as tungsten and lead present in the accelerator itself. At these facilities, measurements of the ambient dose equivalent for neutrons present difficulties owing to the existence of a mixed radiation field and possible electromagnetic interference near the accelerator. The Neutron Laboratory of the IRD - Brazilian Institute for Radioprotection and Dosimetry, aiming to evaluate the survey meters performance at these facilities, initiated studies of instrumentation response in the presence of different neutron spectra. Neutrons sources with average energies ranging from 0.55 to 4.2 MeV, four different survey meters and one ionization chamber to obtain the ratio between the dose due to neutrons and gamma radiation were used in this work. The evaluation of these measurements, performed in a 15 MV linear accelerator room is presented. This work presents results that demonstrate the complexity and care needed to make neutrons measurements in radiotherapy treatment rooms containing high energy clinical accelerators. (author)

  9. Recovery of the external anticorrosion protection systems of onshore pipelines - evaluation methods and practical results; Recuperacao de sistemas de protecao anticorrosiva externa de dutos terrestres - metodos de avaliacao e resultados praticos

    Energy Technology Data Exchange (ETDEWEB)

    Castinheiras, Wilson; Koebsch, Andre; Silva, Flavio A. da [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2003-07-01

    The rehabilitation of an old pipeline means to increase its lifetime, making it safety to operate in the necessaries conditions to transport the product. The pipe steel wall evaluation, related to it thickness reduction, due to, basically, internal and external corrosion, is fundamental to guide its rehabilitation. The techniques used to this evaluation are 'pig' and specials field survey. These last surveys are realized over the soil surface (digs is not necessary to access the pipeline or the pipeline operation is not necessary to stop) and objective to verify the pipeline coating and Cathodic Protection System conditions. Due to the actual authors experience, this paper will only treat of the Rehabilitation of the External Anti corrosive Protection System (coating and cathodic protection) of onshore pipelines. This paper present the techniques current attenuation, ON-OFF pipe-to-soil potential close interval survey and DCVG and same practical results obtained with the application of these techniques on the Sergipe/Bahia gas pipeline. (author)

  10. Mathematical models evaluation of the calculation of the spread in the rolling of ellipsoidal and diamond profiles; Avaliacao de modelos matematicos para calculo do alargamento na laminacao dos perfis oval e losango

    Energy Technology Data Exchange (ETDEWEB)

    Schaeffer, Lirio; Guedes, Luiz F.M. [Rio Grande do Sul Univ., Porto Alegre, RS (Brazil). Programa de Pos-graduacao em Engenharia Metalurgica e dos Materiais

    1987-12-31

    In this work, general considerations are initially performed about the spread and the main factors which influence it in the rolling process.It was established a prior analysis of the models in the case of oval and diamond profiles rolling. Afterwards, three mathematical models to calculate the spread are presented. It was notes that for some mathematical models, because their expressions are presented for the rectangular sections rolling, it was necessary to use auxiliary methods, which are also shown in this work. 14 refs., 5 figs., 5 tabs.

  11. Process perspective on image quality evaluation

    Science.gov (United States)

    Leisti, Tuomas; Halonen, Raisa; Kokkonen, Anna; Weckman, Hanna; Mettänen, Marja; Lensu, Lasse; Ritala, Risto; Oittinen, Pirkko; Nyman, Göte

    2008-01-01

    The psychological complexity of multivariate image quality evaluation makes it difficult to develop general image quality metrics. Quality evaluation includes several mental processes and ignoring these processes and the use of a few test images can lead to biased results. By using a qualitative/quantitative (Interpretation Based Quality, IBQ) methodology, we examined the process of pair-wise comparison in a setting, where the quality of the images printed by laser printer on different paper grades was evaluated. Test image consisted of a picture of a table covered with several objects. Three other images were also used, photographs of a woman, cityscape and countryside. In addition to the pair-wise comparisons, observers (N=10) were interviewed about the subjective quality attributes they used in making their quality decisions. An examination of the individual pair-wise comparisons revealed serious inconsistencies in observers' evaluations on the test image content, but not on other contexts. The qualitative analysis showed that this inconsistency was due to the observers' focus of attention. The lack of easily recognizable context in the test image may have contributed to this inconsistency. To obtain reliable knowledge of the effect of image context or attention on subjective image quality, a qualitative methodology is needed.

  12. Evaluation of the permeability of microporous membranes polyamide 6 / clay bentonite for water-oil separation; Avaliacao da permeabilidade de membranas microporosas de poliamida 6/argila bentonitica para separacao agua-oleo

    Energy Technology Data Exchange (ETDEWEB)

    Medeiros, P.S.S.; Medeiros, K.M.; Araujo, E.M.; Lira, H.L., E-mail: keilamm@ig.com.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil). Unidade Academica de Engenharia de Materiais

    2014-07-01

    The petroleum refining industries have faced major problems in relation to the treatment of their effluents before disposal into the environment. Among the conventional technologies treatment of these effluents, the process of oil-water separation by means of membranes has been extensively used, for having enormous potentiality. Therefore, in this study, hybrid membranes of polyamide 6/ bentonite clay were produced by the technique of phase inversion and by precipitation of the solution from the nanocomposites obtained by melt intercalation. The clay was organically modified with the quaternary ammonium salt (Cetremide®). The nanocomposites were obtained from (PA6) with untreated (AST) and treated clay (ACT), which were subsequently characterized by X-ray diffraction (XRD). Already membranes were characterized by XRD, scanning electron microscopy (SEM) and flow measurements. From the XRD results, it was observed an exfoliated and/or partially exfoliated structure for the nanocomposites and for the membranes. From SEM images it was observed that the presence of AST and ACT clays in the polymeric matrix caused changes in membrane morphology and pore formation. The flow with distilled water in the membranes showed a decrease initially and then followed by stability. All membranes tested in the process of separating emulsions of oil in water, particularly those of nanocomposites obtained a significant reduction of oil concentration in the permeate, thus showing that these membranes have a great potential to be applied to the water-oil separation. (author)

  13. Evaluation of alternatives for reducing the consumption of natural gas fuel at city-gates of Brazilian transport systems; Avaliacao das alternativas de reducao do consumo de gas natural combustivel nos pontos de entrega dos sistemas de transporte brasileiros

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Almir B [Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (ANP), Rio de Janeiro, RJ (Brazil); Augusto, Cristiane R; Seidl, Peter R [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Goncalves, Raquel G [UNISUAM - Centro Universitario Augusto Motta, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This work aims to identify actions that can be implemented to increase the energy efficiency of processes involved in the value chain of natural gas, specifically in the process of heating in existing city-gates of transporting natural gas Brazilians plants. The goal is increase supply of gas in Brazil. The main function of city-gates is to deliver the natural gas in contract terms (flow, pressure, temperature and quality). The main issue related to the consumption of natural gas fuel in city-gates is related to the operation (set-up and control) of natural gas combustion, in other words, depends on how the heating system is adjusted dynamically to burn, efficiently, the exact amount of gas required by this system, depending on temperature, pressure, temperature, quality and flow of natural gas at the 'city-gates'. The main objective of this work is to present a study on alternatives at design, set-up and control of natural gas city-gates (transport) in Brazil, aiming to increase the energy efficiency of this facility, and thus contributing to the growth in supply of natural gas available to the market. (author)

  14. Evaluation of alternatives for reducing the consumption of natural gas fuel at city-gates of Brazilian transport systems; Avaliacao das alternativas de reducao do consumo de gas natural combustivel nos pontos de entrega dos sistemas de transporte brasileiros

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Almir B. [Agencia Nacional do Petroleo, Gas Natural e Biocombustiveis (ANP), Rio de Janeiro, RJ (Brazil); Augusto, Cristiane R.; Seidl, Peter R. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Goncalves, Raquel G. [UNISUAM - Centro Universitario Augusto Motta, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This work aims to identify actions that can be implemented to increase the energy efficiency of processes involved in the value chain of natural gas, specifically in the process of heating in existing city-gates of transporting natural gas Brazilians plants. The goal is increase supply of gas in Brazil. The main function of city-gates is to deliver the natural gas in contract terms (flow, pressure, temperature and quality). The main issue related to the consumption of natural gas fuel in city-gates is related to the operation (set-up and control) of natural gas combustion, in other words, depends on how the heating system is adjusted dynamically to burn, efficiently, the exact amount of gas required by this system, depending on temperature, pressure, temperature, quality and flow of natural gas at the 'city-gates'. The main objective of this work is to present a study on alternatives at design, set-up and control of natural gas city-gates (transport) in Brazil, aiming to increase the energy efficiency of this facility, and thus contributing to the growth in supply of natural gas available to the market. (author)

  15. Prospective evaluation of biorefinery routes in Brazil, from sugar cane bagasse as a basic feedstock; Avaliacao prospectiva das rotas de biorefinaria no Brasil, a partir do bagaco de cana-de-acucar como materia-prima basica

    Energy Technology Data Exchange (ETDEWEB)

    Ely, Romulo Neves

    2009-12-15

    Bio refineries have been identified either as an alternative to oil refineries or as a supplement. This work seeks to understand these plants applied to the Brazilian case, which has in the alcohol-sugar sector a large number of lignocellulose material (sugar-cane bagasse) produced in large scale as a residue of the process of sugar and alcohol production. In this case, technological routes that are able to use this product as a basic feedstock for the industrial process will be described. Therefore, a model based on a set of economical and technological variables is applied to the routes. In this model, different profiles of bio refinery plants are described and compared with different hypothetical regions, which are characterized by a combination of both access to different amounts of raw material and different types of consumers. Overall, this work describes a model of both location and competition of the main bio refinery technological routes in Brazil that have the sugar-cane bagasse as the basic raw material. (author)

  16. Morphofunctional evaluation of human skin preserved in glycerol and exposed to gamma radiation: a study in athymic mice; Avaliacao morfofuncional de pele humana conservada em glicerol e submetida a radiacao gama: estudo em camundongos atimicos

    Energy Technology Data Exchange (ETDEWEB)

    Bringel, Fabiana de Andrade

    2011-07-01

    Extensive skin lesions expose the body to damaging agents, which makes spontaneous regeneration difficult and, in many cases, leads patient to death. In such cases, if there are no donating areas for autograft, allografts can be used. In this type of graft, tissue is processed in tissue banks, where it can be subjected to radiosterilization. According to in vitro studies, gamma radiation, in doses higher than 25 kGy, induces alterations in skin preserved in glycerol at 85%, reducing the tensile strength of irradiated tissue. Clinical observation also suggests faster integration of such graft with the receptors tissue. In order to assess if the alterations observed in vitro, would compromise in vivo use, transplants of human tissue, irradiated or not, were performed in Nude mice. The skin of the mice was subjected to macroscopic analysis, optical coherence tomography imaging, histological and biomechanical assays. It was possible to conclude that grafts irradiated with 25 kGy promoted greater initial contraction, without alteration of the final dimensions of the repair area, also displaying a faster closing of the wound. Moreover, the use of irradiated grafts (25 and 50 kGy) enabled the formation of a more organized healing process without significant effects on biomechanical properties. (author)

  17. Evaluation of occupational exposure to chemicals in research and development laboratories in the petrochemical industry; Avaliacao da exposicao ocupacional a substancias quimicas em laboratorios de pesquisa e desenvolvimento na area petroquimica

    Energy Technology Data Exchange (ETDEWEB)

    Rebelo, Paulo Antonio de Paiva [Seguranca, Meio Ambiente, Eficiencia Energetica e Saude (SMES). Gerencia de Saude (Brazil)], e-mail: prebelo@petrobras.com.br; Coeli, Medina [Unidade de Negocio de Exploracao e Producao do Rio de Janeiro (UN-RIO). Gerencia de Seguranca(Brazil)], e-mail: leo.medina@petrobras.com.br; Rosa, Henrique Vicente Della; Nascimento, Elizabeth de Souza [Universidade de Sao Paulo (USP). Faculdade de Ciencias Farmaceuticas (Brazil)], e-mails: hdellarosa@toxikon.com, esnasci@usp.br

    2009-04-15

    A sectional study was conducted on workers in 137 laboratories, 30 pilot units and support areas of a research center in order to evaluate the level of occupational exposure based on environmental measurements from the 2004's workplace environmental protection program with the aim of assessing the risk of health injury arising from occupational exposure to chemical agents. The recognition task was developed using interviews and secondary data from safety programs covering health and environmental risks of all procedures, facilities / equipment and activities. 2,738 cases of exposure were identified, involving exposure to 484 chemicals (with 246 agents and 238 chemicals mixtures), ranging in purity and concentration, found in 243 jobs. The target population comprised 1,563 workers exposed to chemical agents, subdivided into 168 different Homogeneous Group of Expose with an average of 4.55 employees per group. In each workplace were identified, on average, 4.91 HGE and, on average, 3.73 chemicals. Regarding the 2,738 cases of chemical agents versus activity, in 14% of the cases (382 cases) there was daily exposure, in 82.1% (2,249 cases) the frequency of use varied from two to three times a week and in the remaining 3.9% (107 cases) the use was sporadic, about once a week or less. Nine of the ten most frequently used substances were hydrocarbons. 977 samples (485 samples of chemicals and 492 samples of benzene) were measured. Out of the total number of measurements taken, 91.9% of the evaluations corresponding to 92.5% of workers who work with chemicals, presented environmental measurement results below the action level, demonstrating, therefore, exposure to low concentrations.Chemical were found in most areas of work and accounts for 81% of occupational exposure in the evaluated laboratories. There is evidence of presence of one given substance in various locations, as well as of a great diversity of frequently used chemicals, since in every workplace 3

  18. Image quality and volume computed tomography air kerma index (C{sub vol}) evaluation in Recife; Avaliacao da qualidade de imagem e do indice volumetrico de Kerma ar em tomografia computadorizada (C{sub vol}) em Recife

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Marcos Ely Almeida

    2008-07-01

    The Computed Tomography (CT) is an important diagnostic imaging method, widely used. However, in spite of all the advantages and technologic advances within the CT scanners, the tomographic procedures result in high absorbed doses to patients. The main objective of this work was to perform a dosimetric study of CT scanners located at Recife and to evaluate the image quality on CT examinations in these equipment. The volume CT air kerma index (C{sub VOL}) and air kerma length product (P{sub KL,CT}) were estimated. These values were calculated using normalized weighted air kerma indexes in CT standard dosimetry phantoms ({sub n}C{sub W}), supplied by ImPACT group for several CT scanners, and the scan parameters of routine head, routine chest and hi-resolution chest CT exams performed at 20 institutions. The irradiation parameters of 15 adult patients for each CT procedure were registered at six participating centres, at which the phantom from the American College of Radiology (ACR) CT accreditation protocol was used for the image quality measurements. For routine head exams, the C{sub VOL} values varied between 12 and 58 mGy (at the posterior fossa) and 15 to 58 mGy (at the cerebrum) and the P{sub KL,CT}, from 150 to 750 mGy{center_dot}cm. The C{sub VOL} values for routine chest procedures varied from 3 to 26 mGy and the P{sub KL,CT}, between 120 and 460 mGy{center_dot}cm. In relation to Hi-resolution chest exams, C{sub VOL} values were from 1.0 to 2.7 mGy and the P{sub KL,CT} values varied between 24 and 67 mGy{center_dot}cm. The image quality evaluations results showed that almost all scanners presented at least one inadequacy. One of the equipment presented faults at 70% of the tests. With regard to the image noise, only two scanners presented acceptable results. From these results, it is possible to conclude that the volume CT air kerma index values are lower than the European reference levels. However, the image quality of these CT scanners does not attend the

  19. Does supplier evaluation impact process improvement?

    Directory of Open Access Journals (Sweden)

    Shiva Prasad h c

    2016-09-01

    Full Text Available Purpose: The research explores and examines factors for supplier evaluation and its impact on process improvement particularly aiming on a steel pipe manufacturing firm in Gujarat, India. Design/Methodology/approach: The conceptual research framework was developed and hypotheses were stated considering the analysis of literature and discussions with the managers and engineers of a steel pipe manufacturing company in Gujarat, India. Data was collected using in-depth interview. The questionnaire primarily involves the perception of evaluation of supplier. Factors influencing supplier evaluation and its influence on process improvement is also examined in this study. The model testing and validation was done using partial least square method. Outcomes signified that the factors that influence evaluation of the supplier are quality, cost, delivery and supplier relationship management. Findings: The study depicted that quality and cost factors for supplier evaluation are insignificant. The delivery and supplier relationship management have significant influence on evaluation of the supplier. The research also depicted that supplier evaluation has significant influence on process improvement. Research limitations/implications: The study has been made specifically for ABC steel pipe manufacturing industry in Gujarat, India and may not be appropriate to the other industries or any parts of the world. There is a possibility of response bias as the conclusions of this research was interpreted on survey responses taken from the employees of case study company, so it is suggested that future research can overcome this problem by employing various methodologies in addition to surveys like carrying out focus group and in-depth interviews, brainstorming sessions with the experts etc. Originality/value: Many researchers have considered quality, cost and delivery as the factors for evaluating the suppliers. But for a company it is quintessential to have good

  20. Calculation of the uncertainty of H{sub P} (10) evaluation for a thermoluminescent dosimetry system; Calculo da incerteza da avaliacao do H{sub P} (10) para um sistema de dosimetria termoluminescente

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, M.S.; Silva, E.R.; Mauricio, C.L.P., E-mail: max.das.ferreira@gmail.com [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)

    2016-07-01

    Full interpretation of dose assessment only can be performed when the uncertainty of the measurement is known. The aim of this study is to calculate the uncertainty of the TL dosimetry system of the LDF/IRD for evaluation of H{sub P} (10) for photons. It has been done by experimental measurements, extraction of information from documents and calculation of uncertainties based on ISO GUM. Energy and angular dependence is the most important source to the combined u{sub c}(y) and expanded (U) uncertainty. For 10 mSv, it was obtained u{sub c}(y) = 1,99 mSv and U = 3,98 mSv for 95% of coverage interval. (author)

  1. Effects of JPEG data compression on magnetic resonance imaging evaluation of small vessels ischemic lesions of the brain; Efeitos da compressao de dados JPEG na avaliacao de lesoes vasculares cerebrais isquemicas de pequenos vasos em ressonancia magnetica

    Energy Technology Data Exchange (ETDEWEB)

    Kuriki, Paulo Eduardo de Aguiar; Abdala, Nitamar; Nogueira, Roberto Gomes; Carrete Junior, Henrique; Szejnfeld, Jacob [Universidade Federal de Sao Paulo (UNIFESP/EPM), SP (Brazil). Dept. de Diagnostico por Imagem]. E-mail: paulokuriki@gmail.com

    2006-01-15

    Objective: to establish the maximum achievable JPEG compression ratio without affecting quantitative and qualitative magnetic resonance imaging analysis of ischemic lesion in small vessels of the brain. Material and method: fifteen DICOM images were converted to JPEG with a compression ratio of 1:10 to 1:60 and were assessed together with the original images by three neuro radiologists. The number, morphology and signal intensity of the lesions were analyzed. Results: lesions were properly identified up to a 1:30 ratio. More lesions were identified with a 1:10 ratio then in the original images. Morphology and edges were properly evaluated up toa 1:40 ratio. Compression did not affect signal. Conclusion: small lesions were identified ( < 2 mm ) and in all compression ratios the JPEG algorithm generated image noise that misled observers to identify more lesions in JPEG images then in DICOM images, thus generating false-positive results.(author)

  2. Micellar copolymerization of poly(acrylamide-g-propylene oxide): rheological evaluation and solution characterization; Copolimerizacao micelar de poli(acrilamida-g-oxido de propileno): avaliacao reologica e caracterizacao de suas solucoes

    Energy Technology Data Exchange (ETDEWEB)

    Sadicoff, Bianca L.; Brandao, Edimir M.; Lucas, Elizabete F. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Inst. de Macromoleculas]. E-mail: elucas@ima.ufrj.br; Amorim, Marcia C.V. [Universidade Estadual, Rio de Janeiro, RJ (Brazil). Inst. de Quimica

    2001-06-01

    Graft copolymers of polyacrylamide and poly(propylene oxide) were synthesized by a micellar copolymerization technique. The rheological properties of the copolymers solutions were evaluated and compared with literature data for solutions of the same copolymers, synthesized by solution polymerization. The effect of hydrophobe content, salt addition and surfactant addition on the rheological properties were also investigated. Increasing hydrophobe content resulted in higher solution viscosities in the semi-dilute regime. Upon addition of salts, the hydrophobic groups associated to minimize their exposure to water. In the semi-dilute region, higher contents of surfactant added resulted in lower reduced viscosities of the polymer solutions. The copolymers were qualitatively characterized by infra-red spectrometry. (author)

  3. Evaluation of radiation protection parameters in dental radiography in the State of Rio de Janeiro, Brazil; Avaliacao de parametros de radioprotecao em radiologia odontologica no Estado do Rio de Janeiro

    Energy Technology Data Exchange (ETDEWEB)

    Dovales, Ana Cristina M; Oliveira, Sergio L. Girao de; Cucco, Antonio Carlos S; Bezerra, Marcos Antonio; Mota, Helvecio C [Instituto de Radioprotecao e Dosimetria (IRD), Rio de Janeiro, RJ (Brazil). Dept. de Fisica Medica

    2001-07-01

    This paper presents the results obtained in a program for the postal evaluation of radiation protection parameters in dental radiography in the state of Rio de Janeiro. The postal kit contains a radiographic film and two pairs of thermoluminescent dosimeters separated by a 3 mm aluminium filter and is accompanied by a questionnaire about equipment characteristics and exposition parameters. The analysis of 2596 equipment in the last three years showed that near half of the examinations produces doses higher than the diagnostic reference level established by the health authorities for this kind of examination. Field diameter is within the acceptable range in 73,5% of the tests and total filtration is higher than 1,5 mm Al equivalent in 86,64% of the cases. Comparing with earlier results this analysis suggests that radiation protection conditions in dental radiography are improving in the state of Rio de Janeiro. (author)

  4. Evaluation of radiotherapy and chemotherapy treatment in patients of oral squamous cell carcinoma; Avaliacao dos resultados dos tratamentos radioterapico e quimioterapico em pacientes portadores de carcinoma espinocelular na cavidade bucal

    Energy Technology Data Exchange (ETDEWEB)

    Sannomiya, Eduardo Kazuo [Universidade de Santo Amaro (UNISA), SP (Brazil). Faculdade de Odontologia. Dept. de Diagnostico e Cirurgia; Medici Filho, Edmundo; Moraes, Luiz Cesar de; Castilho, Julio Cezar de Melo [UNESP, Sao Jose dos Campos, SP (Brazil). Faculdade de Odontologia. Dept. de Cirurgia, Periodontia e Radiologia; Furukawa, Souhei [Osaka Univ. (Japan). Faculdade de Odontologia. Dept. de Radiologia e Radioterapia Buco-Maxilo-Facial

    2003-12-01

    We evaluated the effectiveness of radiotherapy combined with chemotherapy in patients with oral squamous cell carcinoma. Therefore, 1042 cases where reviewed in School Dentistry - Osaka Univ. Seven hundred and fifteen were male and three hundred and twenty-seven were female. Ora cancer was affected more male than female patients, with mean age of 582 years old. The tongue was the most common anatomic localization of oral cancer. In tongue, the use of external radiotherapy y combined with brachytherapy and brachytherapy isolated presented better results than chemotherapy combined with external radiotherapy. In buccal mucosa, there was not differences in the treatment's results using external radiotherapy and combined chemotherapy and external radiotherapy. In tongue's floor and upper and jaw gingiva the combined treatment with chemotherapy and external radiotherapy presented better results than isolated external radiotherapy. (author)

  5. Thermal hydraulic evaluation for an experimental facility to investigate pressurized thermal shock (PTS) in CDTN/CNEN; Avaliacao termo-hidraulica da montagem experimental de choque termico pressurizado do CDTN/CNEN

    Energy Technology Data Exchange (ETDEWEB)

    Palmieri, Elcio T.; Navarro, Moyses A.; Aronne, Ivam D.; Terra, Jose L. [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil)

    2002-07-01

    The goal of the work presented in this paper is to provide necessary thermal hydraulics information to the design of an experimental installation to investigate the Pressurized Thermal Shock (PTS) to be implemented at Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN). The envisaged installation has a test section that represents, in a small scale, a pressure vessel of a nuclear reactor. This test section will be heated and then exposed to a PTS in order to evaluate the appearance and development of cracks. To verify the behavior of the temperatures of the pressure vessel after a sudden flood through the annulus, calculations were made using the RELAP5/MOD 3.2.2 gamma code. Different outer radiuses were studied for the annular region. The results showed that the smaller annulus spacing (20 mm) anticipates the wetting of the surface and produces a higher cooling of the external surface, which stays completely wet for a longer time. (author)

  6. Evaluation of the mineralogical characterization of several smectite clay deposits of the state of Paraiba, Brazil using statistical analysis of variance; Avaliacao da caracterizacao mineralogica de diversos depositos de argilas esmectiticas do estado da Paraiba utilizando analise estatistica de variancia

    Energy Technology Data Exchange (ETDEWEB)

    Gama, A.J.A.; Menezes, R.R.; Neves, G.A.; Brito, A.L.F. de, E-mail: agama@reitoria.ufcg.edu.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil)

    2015-07-01

    Currently over 80% of industrialized bentonite clay produced in Brazil in sodium form for use in various industrial applications come from the deposits in Boa Vista - PB. Recently they were discovered new bentonite deposits situated in the municipalities of Cubati - PB, Drawn Stone - PB, Sossego - PB, and last in olive groves - PB, requiring systematic studies to develop all its industrial potential. Therefore, this study aimed to evaluate chemical characterization several deposits of smectite clays from various regions of the state of Paraíba through the analysis of statistical variance. Chemical analysis form determined by fluorescence x-ray (EDX). Then analyzes were carried out of variance statistics and Tukey test using the statistical soft MINITAB® 17.0. The results showed that the chemical composition of bentonite clay of new deposits showed different amounts of silica, aluminum, magnesium and calcium in relation clays in Boa Vista, and clays imported. (author)

  7. Application of support vector machines in the evaluation of reliability generation and transmission systems; Aplicacao de maquinas de vetores suporte na avaliacao da confiabilidade de sistemas de geracao e transmissao

    Energy Technology Data Exchange (ETDEWEB)

    Dutra, Wellington Damascena; Resende, Leonidas Chaves de [Universidade Federal de Sao Joao Del-Rei (UFSJ), MG (Brazil); Manso, Luiz Antonio da Fonseca; Silva, Armando Martins Leite da [Universidade Federal de Itajuba (UNIFEI), MG (Brazil)

    2010-07-01

    This paper presents a methodology for assessing the reliability indices for composite generation and transmission systems based on Support Vector Machines (SVM). The importance of SVMs is its high generalization ability. The SVMs are used to classify data into two distinct classes. These can be named positive and negative. Thus, the basic idea is to classify the system states into success or failure. For this, a pre-classification of states is achieved by performing the proposed SVM-based neural network, where the sampled states during the beginning of the non-sequential Monte Carlo simulation (MCS) are considered as input data for training and validation sets. By adopting this procedure, a large number of states are classified by a simple evaluation of the network, providing significant reductions in computational costs. The proposed methodology is applied to the IEEE Reliability Test System and to the IEEE Modified Reliability Test System. (author)

  8. Evaluation of NORM concentration in water treatment of Pocos de Caldas municipality, MG, Brazil: preliminary results; Avaliacao da presenca de NORM no tratamento de agua do municipio de Pocos de Caldas: resultados preliminares

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Adriano Mota; Villegas, Raul A.S.; Fukuma, Henrique Takuji, E-mail: htfukuma@cnen.gov.br, E-mail: adrianomotaferreira@gmail.com [Comissao Nacional de Energia Nuclear (CNEN), Rio de Janeiro, RJ (Brazil)

    2014-07-01

    NORM is the acronym used to refer to naturally occurring radioactive materials. Besides being objects of study and monitoring such materials can be used as raw material or as by-products or waste of industrial activities. Oil and gas, mining and water treatment are examples of facilities that can handle NORM. In such cases, their concentration at significant levels from the perspective of environmental and occupational radiation protection may occur. This study aims to evaluate the presence of the natural radioactive {sup 238}U and {sup 232}Th series in the treatment of city water elements Pocos de Caldas - MG (water, materials and waste). The study can serve as an indication of the necessity of a more detailed review in the locally and in the country on this radiological issue. (author)

  9. Evaluation of polymeric materials packed in fixed bed column for oil water remediation; Avaliacao de materiais polimericos empacotados em colunas de leito fixo para a remediacao de aguas oleosas

    Energy Technology Data Exchange (ETDEWEB)

    Queiros, Yure G.C.; Barros, Cintia Chagas; Oliveira, Roberta S.; Marques, Luiz R.S.; Cunha, Luciana; Lucas, Elizabete F. [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Inst. de Macromoleculas Eloisa Mano], e-mail: yuregomes@ima.ufrj.br, e-mail: elucas@ima.ufrj.br

    2007-07-01

    Polymeric resins are being tried as an alternative material for treating oily waters from the petroleum industry, which have already been treated by conventional methods. The objective of this work has been to evaluate the purification degree of synthetic oily waters when treated in fixed bed columns packed with polymeric resins made up of hydrophilic and lipophilic moieties. The analysis used for characterizing the total grease and oil content (TOG) was fluorimetry. Starting oily waters of average TOG 50 ppm were prepared. Data obtained from eluted waters did not outweigh 10% of the TOG values of starting solutions in some blends of resins with a pretty good mechanical stability under the increase of pressure. Organoclay material showed a good retention performance, but has presented a mechanical instability too, compromising its use for larger amounts of wastewater. (author)

  10. Evaluation of the use of waste of soybeans (Glycine max (L.)) combined with wood waste in making briquet; Avaliacao da utilizacao de residuo de soja (Glycine max (L.)) combinado com residuo de madeira de confeccao de briquetes

    Energy Technology Data Exchange (ETDEWEB)

    Travessini, Rosana; Schutz, Fabiana Costa de Araujo; Anami, Marcelo Hidemassa; Scherpinski, Neusa Idick [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil)], Emails: rosana_travessini@yahoo.com.br, fabianaschutz@gmail.com, mhanami@gmail.com, neusascherpinski@gmail.com

    2010-07-01

    The agricultural industry produces a large amount of which use biomass is an alternative energy economically viable through the compression portion of ligno-cellulose as raw material to replace the wood with an equivalent product, by briquetting. This study aimed to evaluate the technical feasibility of manufacturing fuel briquettes made from soybean residues combined with waste wood. The making of briquettes was performed in the laboratory of Electromechanics of UTFPR campus Medianeira PR. For this analysis, we assessed the content of moisture, ash, fixed carbon content of porosity and higher calorific value. From the results we can conclude that the manufacture of briquettes from lignocellulosic raw materials is an extremely viable energy flashlight for the region of the Bacia do Rio Parana III. (author)

  11. Evaluation of CFD numerical models for the study of the flow of water from the RMB pool; Avaliacao de modelos numericos de CFD para o estudo do escoamento de agua da piscina do RMB

    Energy Technology Data Exchange (ETDEWEB)

    Palmieri, Bruno Leonhardt; Santos, Andre Augusto Campagnole dos; Rezende, Hugo Cesar, E-mail: blp@cdtn.br, E-mail: aacs@cdtn.br, E-mail: hcr@cdtn.br [Centro de Desenvolvimento de Tecnologia Nuclear (CDTN/CNEM-MG), Belo Horizonte, MG (Brazil); Schweizer, Fernando Lage Araujo, E-mail: flas@cdtn.br [Universidade Federal de Minas Gerais (DEN/UFMG), Belo Horizonte, MG (Brazil). Dept. de Energia Nuclear

    2013-07-01

    In this work two numerical models were developed for the study of the flow in the pool of the Brazilian Multipurpose Reactor-RMB using two computer codes: FLUENT and CFX. The codes presents big differences that may affect the results and performance of the simulation. An example is the mesh, which can be fully composed of regular hexahedral and present local refinement in FLUENT, due to the implementation of the solution focused on the element, which is not possible in CFX, which takes a node-centric solution. The temperature profiles were evaluated over the time of simulation. The research and the defining of an appropriate and optimized numerical model will be of fundamental importance for the RMB hot water layer project.

  12. The application of scenarios techniques for evaluation of portfolio investments in E and P projects; A aplicacao das tecnicas de cenarios na avaliacao de carteira de investimentos em projetos de E e P

    Energy Technology Data Exchange (ETDEWEB)

    Torres, Arnaldo L.M.; Rocha, Fabio M.; Rodrigues, Joao R.L.; Farias Filho, Jose Rodrigues de; Campagnac, Luiz A.P. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Nucleo de Competitividade, Estrategia e Organizacoes (LABCEO)

    2008-07-01

    Managements in the organizations deal daily with decision making, today the market competitiveness requires rationality and efficiency. In the project portfolio management a lot of questions emerge to the management, such as: The projects chosen are really the best projects? They are suitable for the reality of the company? The evaluation criteria are appropriate? The methodology employed is adequate? The application of resources is optimized? There is a real commitment from all levels of the organizational structure? In this context, the objective of this work is to describe a model that try to be more applied to the reality, taking into consideration conceptual and motivational aspects related to the implementation of project management involving high investment with restrictions on resources, and still provide a tool to support decision . (author)

  13. Evaluation of technological properties of alumina refractory systems-zirconia and zirconia-silica-alumina; Avaliacao das propriedades tecnologicas de refratarios dos sistemas alumina-zirconia e alumina-zirconia-silica

    Energy Technology Data Exchange (ETDEWEB)

    Marinho, A.R.O.; Carvalho, T.U.S.; Fagury Neto, E.; Rabelo, A.A., E-mail: adriano@unifesspa.edu.br [Universidade Federal do Sul e Sudeste do Para (UFSSPA), Maraba, PA (Brazil)

    2014-07-01

    Alumina-zirconia refractories are noted for being products of excellent cost-effective, however, zirconia may limit its use due to decreasing resistance to thermal shock. This study aims to evaluate these refractories with the addition of microsilica, which can greatly improve their properties. Were used the following starting materials: calcined alumina, zirconia (stabilized and monoclinic) in amounts of 2%, 4% and 6% by weight, plus microsilica (5%w.). The powders were milled together with binder and lubricant for conformation bodies by uniaxial pressing. The samples were dried, calcined and sintered at 1400 °C/2h were characterized using the methods of Archimedes, and scanning electron microscopy (SEM), chemical analysis using energy dispersive X-ray (EDS), and mechanical flexural strength tests at room temperature. Formulations with the presence of microsilica showed satisfactory results and optimized properties. (author)

  14. Evaluation of performance of AISI 444 steel for application in distillation towers; Avaliacao do desempenho do aco AISI 444 para aplicacao como 'lining' em torres de destilacao

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, R.F.; Miranda, H.C. de; Farias, J.P. [Universidade Federal do Ceara (DEMM/UFC), Fortaleza, CE (Brazil). Dept. de Engenharia Metalurgica e de Materiais. Lab. de Caracterizacao de Materiais], e-mail: rf.guimaraes@yahoo.com.br

    2008-07-01

    In this work, the behavior of the AISI 444 ferritic stainless steel submitted to thermal fatigue test and their corrosion resistance in heavy crude oil was evaluated. The AWS E309MoL-16 and E316L-17 weld metal was employed as filler metal. Plates of the AISI 444 were welded on ASTM A-516 Gr. 60 plates and submitted to fatigue thermal cycle. Samples were extracted from plates welded and heat treated immersed in heavy crude oil at 300 deg C. Optical microscopy (OM), scanning electron microscopy (SEM) and energy dispersive of X-ray analysis (EDX) were used to characterize the microstructure and the corroded surface. The results show that the AISI 444 stainless steels did not present cracks after the thermal fatigue cycle and the heat treated immerse in heavy crude oil. The electrode AWS E309MoL-16 show better corrosion resistance than the AWS E316L-17. (author)

  15. Evaluation as a catalyst in ferrispinel NiFe{sub 2}O{sub 4} esterification and transesterification; Avaliacao do ferroespinelio NiFe{sub 2}O{sub 4} como catalisador em reacao de esterificacao e transesterificacao

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Kleberson Ricardo de Oliveira; Dantas, Joelda; Costa, Ana Cristina Figueiredo de Melo; Silva, Adriano Sant' Ana, E-mail: klebersonric@usp.br [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Kiminami, Ruth Herta Goldschmidt Aliaga [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil). Departamento de Engenharia de Materiais

    2014-07-01

    The advancement of nanoscience and nanotechnology, magnetic nanoparticles ferrispinels type, have found numerous applications in biochemistry, molecular biology, biomedicine, diagnosis and heterogeneous catalysis for biodiesel production. Therefore, we propose to synthesize ferrispinel NiFe{sub 2}O{sub 4} and evaluate its performance as a catalyst for esterification and transesterification of the methyl soybean oil. The sample was obtained through combustion reaction with production of 10 g / batch and characterized by XRD, SEM and BET. The catalytic reaction was conducted in high-pressure reactor at 180 °C for 1 hour, with a molar ratio of oil:ethanol 1:12 with 2% catalyst. The results showed the formation of ferrispinel phase, morphology composed of aggregates in the form of irregular blocks formed by pre sintered particles and low interparticle porosity. As a catalyst, the conversion values presented ferrispinel 52% and 4% in the esterification and transesterification, respectively, indicating that promising material for use in biodiesel production. (author)

  16. Synthesis and characterization of poly(methyl methacrylate-co-vinyl acetate) and its evaluation as filtrate reducer; Sintese e caracterizacao de poli(metacrilato de metila-co-acetato de vinila) e sua avaliacao como redutor de filtrado

    Energy Technology Data Exchange (ETDEWEB)

    Nunes, Rita de Cassia P.; Pires, Renata V.; Segtovich, Iuri V.; Lucas, Elizabete F. [Universidade Federal do Rio de Janeiro, Instituto de Macromoleculas, Laboratorio de Macromoleculas e Coloides na Industria de Petroleo, (UFRJ), RJ (Brazil)], e-mail: repires@ima.ufrj.br

    2011-07-01

    The drilling of petroleum well is extremely important and requires the use of suitable drilling fluids in order to ensure an efficient operation without causing rock damage. Specific polymers have been used in controlling infiltration during drilling, ensuring the operation success. In this work, spherical microparticles of poly(methyl methacrylate-co-vinyl acetate) (PMMA-VAc), prepared by suspension polymerization, were evaluated in terms of their performance in controlling filtrate loss of aqueous fluids. A filter press test with ceramic disc, simulating the rock, was used. The performance of the synthesized materials was compared to that of commercial polymers. It was observed that the performance of the material is directly associated to the relation between particle size and pore size of rock specimen. Furthermore, when the particle size is suitable, the rubbery characteristic of the material produces a more efficient filter cake, for filtrate control. (author)

  17. Evaluation of the reuse of glass and ceramic blocks in the development of a ceramic products; Avaliacao do reaproveitamento de blocos ceramicos e de vidro no desenvolvimento de um produto ceramico

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, R.A.; Silva, L.A.; Martins, B.E.D.B.S.; Felippe, C.E.C.; Almeida, V.C., E-mail: valeria@eq.ufrj.b [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica

    2010-07-01

    The ceramic industry has enormous potential to absorb wastes. The main objective of this study was to evaluate the feasibility of reusing leftovers ceramic blocks, from construction and, with shards of glass in the development of a ceramic product. The ceramic pieces were prepared with different compositions of glass by the method of pressing conformation and heating at 1000 and 1100 deg C. The conformed pieces were tested for linear shrinkage, water absorption, porosity, and tensile strength. The techniques for characterization were X-ray fluorescence, X-ray diffraction and scanning electron microscopy, the results show that the ceramic material produced has a high flexural strength and low values of water absorption. (author)

  18. Evaluating factorial kriging for seismic attributes filtering: a geostatistical filter applied to reservoir characterization; Avaliacao da krigagem fatorial na filtragem de atributos sismicos: um filtro geoestatistico aplicado a caracterizacao de reservatorios

    Energy Technology Data Exchange (ETDEWEB)

    Mundim, Evaldo Cesario

    1999-02-01

    In this dissertation the Factorial Kriging analysis for the filtering of seismic attributes applied to reservoir characterization is considered. Factorial Kriging works in the spatial, domain in a similar way to the Spectral Analysis in the frequency domain. The incorporation of filtered attributes via External Drift Kriging and Collocated Cokriging in the estimate of reservoir characterization is discussed. Its relevance for the reservoir porous volume calculation is also evaluated based on comparative analysis of the volume risk curves derived from stochastic conditional simulations with collocated variable and stochastic conditional simulations with collocated variable and stochastic conditional simulations with external drift. results prove Factorial Kriging as an efficient technique for the filtering of seismic attributes images, of which geologic features are enhanced. The attribute filtering improves the correlation between the attributes and the well data and the estimates of the reservoir properties. The differences between the estimates obtained by External Drift Kriging and Collocated Cokriging are also reduced. (author)

  19. Evaluation of gamma irradiation effects on carotenoids, ascorbic acid and sugar contents of buriti fruit (Mauritia flexuosa L.); Avaliacao dos efeitos da radiacao gama nos teores de carotenoides, acido ascorbico e acucares do fruto Buriti do Brejo (Mauritia flexuosa L.)

    Energy Technology Data Exchange (ETDEWEB)

    Lima, Antonio Luis dos Santos [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Engenharia Quimica, Quimica Organica e de Produtos Naturais], e-mail: santoslima@ime.eb.br; Lima, Keila dos Santos Cople; Silva, Jaqueline Michele [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Engenharia Nuclear. Irradiacao de Alimentos], e-mail: keila@ime.eb.br, e-mail: jaquelinefisica@bol.com.br; Coelho, Maysa Joppert [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Engenharia Nuclear. Engenharia Ambiental], e-mail: maysa@ime.eb.br; Godoy, Ronoel Luiz de Oliveira [EMBRAPA Agroindustria de Alimentos, Rio de Janeiro, RJ (Brazil). Lab. de Cromatografia Liquida, Quimica Organica e de Produtos Naturais], e-mail: ronoel@ctaa.embrapa.br; Pacheco, Sidney [EMBRAPA Agroindustria de Alimentos, Rio de Janeiro, RJ (Brazil). Lab. de Cromatografia Liquida, Ciencia e Tecnologia de Alimentos], e-mail: sidney@ctaa.embrapa.br

    2009-07-01

    Buriti (Mauritia flexuosa L.), a typical fruit from the Northeast and Center-West Amazon of Brazil, is used in many regional dishes. It is considered an excellent source of carotenoids that are A vitamin precursors, showing a majority of beta-carotene. It also presents ascorbic acid and sugar contents. Many studies have indicated that the lack of A vitamin is the main cause of night blindness and xerophthalmia. Also, ascorbic acid deficiency may cause scorbutic disease. The use of food irradiation is growing and represents an economic benefit to agriculture through the reduction of post-harvesting losses while maintaining food nutritional quality. In this study, buriti in natura was treated with gamma irradiation with doses of 0.5 kGy and 1.0 kGy. The objective was to evaluate the irradiation effects on total carotenoids, ascorbic acid and sugars concentrations of buriti. The fruit was evaluated through the total carotenoids analysis, by spectrophotometry, and the carotenoids (alpha and beta-carotene and lutein), ascorbic acid and sugars were determined by high performance liquid chromatography (HPLC). The results showed that buriti is an excellent source of total carotenoids (44600 {mu}g/100 g). The irradiation of buriti with the dose of 0.5 kGy did not significantly change carotenoids and sugars contents. However, there was a reduction of ascorbic acid concentration with an increase of the dose, which may have been caused by irradiation or by intrinsic and extrinsic factors that alter ascorbic acid stability in food, converting ascorbic to dehydroascorbic acid, while keeping the C vitamin active form. (author)

  20. Evaluation of the potential of additives as corrosion inhibitors of CA-50 carbon steel used as reinforcement in concretes; Avaliacao da potencialidade de aditivos como inibidores de corrosao do aco carbono CA-50 usado como armadura de estruturas de concreto

    Energy Technology Data Exchange (ETDEWEB)

    Mennucci, Marina Martins

    2006-07-01

    In this work, various compounds were tested to evaluate their potential capability for their use as corrosion inhibitors of carbon steel reinforcement in concretes. The additives tested were sodium benzoate, polyethylene glycol, hexamethylenetetramine, benzotriazole and yttrium carbonate. Initially, exploratory tests were carried out to select the ones to be used as corrosion inhibitors, based on the inhibit ion efficiency determined from electrochemical tests, specifically polarization tests and electrochemical impedance spectroscopy. These tests were carried out in a solution composed of 0.01 N sodium hydroxide (NaOH) and 0.05 N potassium hydroxide (KOH) to simulate the composition of the solution inside the pores in concretes. The additive that presented the most promising potential to be used as corrosion inhibitor was benzotriazole (BTA). After the elimination of some compounds and selection of the additive with higher corrosion inhibit ion efficiency in the test medium, the effect of its concentration on the corrosion inhibition efficiency was evaluated. Sodium nitrite solutions with the same concentrations as those solutions with BTA were tested for comparison reasons. Sodium nitrite is a well established corrosion inhibitor for carbon steel reinforcement in concretes but it has been related to toxic effects. The BTA was associated to higher corrosion inhibition efficiencies than that of sodium nitrite in similar concentrations. A blackish adherent film was formed on the steel surface exposed to BTA solutions during long periods of immersion in the alkaline medium. The results suggest that BTA is a potential candidate for substitution of nitrites as corrosion inhibitor of reinforcements in concrete. (author)

  1. Evaluation of the Analytical Anisotropic Algorithm (AAA) in dose calculation for fields with non-uniform fluences considering heterogeneity correction; Avaliacao do Algoritmo Analitico Anisotropico (AAA) no calculo de dose para campos com fluencia nao uniforme considerando correcao de heterogeneidade

    Energy Technology Data Exchange (ETDEWEB)

    Bornatto, P.; Funchal, M.; Bruning, F.; Toledo, H.; Lyra, J.; Fernandes, T.; Toledo, F.; Marciao, C., E-mail: pricila_bornatto@yahoo.com.br [Hospital Erasto Gaertner (LPCC), Curitiba, PR (Brazil). Departamento de Radioterapia

    2014-08-15

    The purpose of this study is to evaluate the calculation of dose distribution AAA (Varian Medical Systems) for fields with non-uniform fluences considering heterogeneity correction. Five different phantoms were used with different density materials. These phantoms were scanned in the CT BrightSpeed (©GE Healthcare) upon the array of detectors MAPCHECK2 TM (Sun Nuclear Corporation) and irradiated in a linear accelerator 600 CD (Varian Medical Systems) 6MV and rate dose 400MU/min with isocentric setup. The fluences used were exported from IMRT plans, calculated by ECLIPSE™ planning system (Varian Medical Systems), and a 10x10 cm{sup 2} field to assess the heterogeneity correction for uniform fluence. The measured dose distribution was compared to the calculated by Gamma analysis with approval criteria of 3% / 3 mm and 10% threshold. The evaluation was performed using the software SNCPatient (Sun Nuclear Corporation) and considering absolute dose normalized at maximum. The phantoms best performers were those with low density materials, with an average of 99.2% approval. Already phantoms with plates of higher density material presented various fluences below 95% of the points approved. The average value reached 94.3%. It was observed a dependency between fluency and approved percentage points, whereas for the same fluency, 100% of the points have been approved in all phantoms. The approval criteria for IMRT plans recommended in most centers is 3% / 3mm with at least 95% of points approved, it can be concluded that, under these conditions, the IMRT plans with heterogeneity correction can be performed , however the quality control must be careful because the difficulty of the system to accurately predict the dose distribution in certain situations. (author)

  2. Evaluation of internal occupational exposure of workers from nuclear medicine services by aerosol analysis containing {sup 131}I; Avaliacao da exposicao interna de trabalhadores em servicos de medicina nuclear atraves da analise de aerossois contendo {sup 131}I

    Energy Technology Data Exchange (ETDEWEB)

    Carneiro, Luana Gomes; Sampaio, Camilla da Silva; Dantas, Ana Leticia Almeida; Lucena, Eder Augusto; Santos, Maristela Souza; Dantas, Bernardo Maranhao, E-mail: carneiro@ird.gov.br [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ),Rio de Janeiro, RJ (Brazil); Paula, Gustavo Affonso de [Escola SESC de Ensino Medio, Rio de Janeiro, RJ (Brazil)

    2014-07-01

    This study evaluated the risk of internal occupational exposure associated with the incorporation of {sup 131}I via inhalation, in Nuclear Medicine Services, using aerosol analysis techniques. Occupationally Exposed Individuals (IOE) involved in handling this radionuclide are subject to chronic exposure, which can lead to an increase in the committed effective dose. Results obtained in preliminary studies indicate the occurrence of incorporation of {sup 131}I by workers involved in handling solutions for radioiodine therapy procedures. The evaluation was carried out in radiopharmacy lab (nuclear medicine service) of a public hospital located in the city of Rio de Janeiro. After confirmed the presence of the radioisotope, by a qualitative assessment, it was determined an experimental arrangement for sample collection and were detected and quantitated the presence of steam {sup 131}I during routine work. The average concentration of activity obtained in this study was 3 Bq / m{sup 3}. This value is below of Derived Concentration in Air (DCA) of 8.4 x 10{sup 3} Bq of {sup 131}I / m{sup 3} corresponding to a committed effective dose of 1.76 x 10{sup -4} mSv. These results demonstrate that the studied area is safe in terms of internal exposure of workers. However, the presence of {sup 131}I should be periodically reevaluated, since this type of exposure contributes to the increase of the individual effective doses. Based on the data obtained improvements were suggested in the exhaust system and the use of good work practices in order to optimize the exposures.

  3. Evaluation of the in vivo performance of composite aluminum/calcium phosphate (CAPs) as bone reconstruction material; Avaliacao in vivo do desempenho de compositos de alumina/fosfato de calcio (CaPs) como material de reconstrucao ossea

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, P.M.; Lima, M.G.; Costa, A.C. [Universidade Federal de Campina Grande (UFCG), PB (Brazil); Pallone, E.M. [Universidade de Sao Paulo (FZEA/USP), Pirassununga, SP (Brazil). Faculdade de Zootecnia e Engenharia de Alimentos; Kiminami, R.H. [Universidade Federal de Sao Carlos (UFSCar), SP (Brazil)

    2016-07-01

    This study aims to evaluate the in vivo performance of composite aluminum/calcium phosphate (CAPs) as bone reconstruction material. To this end, mass CAPs relative to the total weight of Al2O3 prepared Al{sub 2}O{sub 3}/CAPs using percentage of 0, 10, 20 and 30% composites. The composites characterized were by X-ray diffraction, scanning electron microscopy with scanning. After implanted in rabbit tibia randomly divided were into two groups, each with nine rabbits, according to the euthanasia period (30 days after surgery). After euthanasia was performed radiographic and histological evaluation of the grafted areas. The results confirm that the compounds Al{sub 2}O{sub 3}/CAPs presented major phase of alumina and the second phase calcium pyrophosphate. Increasing the concentration of CAPs on alumina promoted with a reduction in density and increase in porosity, as well as an increase in grain size and heterogeneity in the microstructure. Upon radiographic examination of the tibiae of the nine (9) rabbits score was observed with grade 3, or similar radiopacity presented by the remaining cortical bone. It shown was that the tibiae of rabbits with the implant showed the presence of foreign material (composite), well delimited with bone formation and bone proliferation around the implants. At the point where the composite in 30 days' time of sacrifice, there was no observable sign of infection was established, since there were observed no cellular infiltration, no rejection of the implant, concluding that the biocompatible composite was studied. (author)

  4. Evaluation of the contamination risk by {sup 241}AM from lightning rods disposed at uncontrolled garbage dump; Avaliacao da contaminacao provocada por para-raios radioativos de americio-241 descartados em lixoes

    Energy Technology Data Exchange (ETDEWEB)

    Marumo, Julio Takehiro

    2006-07-01

    Radioactive lightning rods were manufactured in Brazil until 1989, when the licenses for using radioactive sources in these products were lifted by the national nuclear authority. Since then, radioactive devices have been replaced by Franklin type one and collected as radioactive waste. However, only 23 percent of the estimated total number of installed rods was delivered to Brazilian Nuclear Commission (Comissao Nacional de Energia Nuclear - CNEN). This situation is of concern as there is a possibility of the rods being discarded as domestic waste, considering that in Brazil, 63.6 percent of the municipal solid waste is disposed at uncontrolled garbage dump, according to Instituto Brasileiro de Geografia e Estatistica (IBGE) in 2000. In addition, americium, the most common employed radionuclide, is classified as a high toxicity element, when ingested or inhaled. In the present study, it was performed migration experiments of Am-241 by lysimeter system in order to evaluate the risk of contamination caused by radioactive lightning rods disposed as a common solid waste. Sources removed from lightning rods were placed inside lysimeters filled with organic waste, collected at the restaurant of Instituto de Pesquisas Energeticas e Nucleares, IPEN-CNEN/SP, and the generated leachate was periodically analyzed to determine its characteristics such as pH, redox potential, solid content and concentration of the radioactive material. Microbial growth was also evaluated by counting the number of colony forming units. The equivalent dose to members of the public has been calculated considering the ingestion of drinking water, the most probable mode of exposure. The final result was about 145 times below the effective dose limit of 1 mSv.year-1 for members of the public, established by the International Commission on Radiological Protection (ICRP), demonstrating that the risk caused by lightning rods disposed at uncontrolled garbage dump is low. (author)

  5. Apical microinfiltration evaluation of radicular channels irradiated with Er:YAG laser in vitro; Avaliacao da microinfiltracao apical de condutos radiculares irradiados in vitro com laser de Er:YAG

    Energy Technology Data Exchange (ETDEWEB)

    Sebrao, Catia Cilene Nass

    2003-07-01

    It was evaluated, in vitro, the adaptation of the filling material (Sealer 2S{sup R}) to the root channels dentine walls treated using the endodontic technique and prepared with the Er:YAG laser, by the technique of infiltration of methylene blue dye. Using scanning electronic microscopy, the morphologic alteration of the root channel dentine was observed for one sample per studied group. Also, an evaluation of the temperature increase in the external surface of the root during the irradiations was performed for two samples per group. For each group of samples, with eleven roots each, two sub-groups had been considered: the dry, irradiated after completely dry with absorbent cones of paper, and the humid, where a cone of absorbent paper was applied for two seconds in the root canal, leaving them lightly humidified. Considering the used energies for the irradiations, the groups are: G1, control (without irradiation), G2-dry (100 mJ-10 Hz), G2-humid (100 mJ-10 Hz), G3-dry (140 mJ-6 Hz), G3-humid (140 mJ-6 Hz), G4-dry (180 mJ-6 Hz), and G4-humid (180 mJ-6 Hz). The results had shown that apical microinfiltration did not exhibit significant difference among groups. The highest increase in temperature was observed for the dry groups, with the maximum variation of temperature of 6.5 deg C. Under the scanning electronic microscopy analysis, the humid groups had presented cleaner surfaces than the dry groups. The G4-humid group presented extensive regions of fusion and resolidification of the dentine. (author)

  6. In vitro evaluation of ionizing radiation effects in bone tissue by FTIR spectroscopy and dynamic mechanical analysis; Avaliacao in vitro dos efeitos da radiacao ionizante em tecido osseo bovino por espectroscoia ATR-FTIR e analise dinamica-mecanica

    Energy Technology Data Exchange (ETDEWEB)

    Veloso, Marcelo Noronha

    2013-07-01

    Ionizing radiation from gamma radiation sources or X-ray generators is frequently used in Medical Science, such as radiodiagnostic exams, radiotherapy, and sterilization of haloenxerts. Ionizing radiation is capable of breaking polypeptidic chains and causing the release of free radicals by radiolysis.of water. It interacts also with organic material at the molecular level, and it may change its mechanical properties. In the specific case of bone tissue, studies report that ionizing radiation induces changes in collagen molecules and reduces the density of intermolecular crosslinks. The aim of this study was to verify the changes promoted by different doses of ionizing radiation in bone tissue using Fourier Transform Infrared Spectroscopy (FTIR) and dynamic mechanical analysis (DMA). Samples of bovine bone were irradiated using Cobalt-60 with five different doses: 0.01 kGy, 0.1 kGy, 1 kGy, 15 kGy and 75 kGy. To study the effects of ionizing irradiation on the chemical structure of the bone, the sub-bands of amide I, the crystallinity index and relation of organic and inorganic materials, were studied. The mechanical changes were evaluated using the elastic modulus and the damping value. To verify whether the chemical changes and the mechanical characteristics of the bone were correlated, the relation between the analysis made with spectroscopic data and the mechanical analysis data was studied. It was possible to evaluate the effects of different doses of ionizing radiation in bone tissue. With ATR-FTIR spectroscopy, it was possible to observe changes in the organic components and in the hydroxyapatite crystals organization. Changes were also observed in the elastic modulus and in the damping value. High correlation with statistical significance was observed among (amide III + collagen)/{sub v1,v3}, PO{sub 4}{sup 3-} and the delta tangent, and among 1/FHWM and the elastic modulus. (author)

  7. Characterization and evaluation of employment of nanostructured spinel MA on oxidation resistance of graffiti; Caracterizacao e avaliacao do emprego de espinelio MA nanoestruturado na resistencia a oxidacao de grafites

    Energy Technology Data Exchange (ETDEWEB)

    Vitor, P.A.M.; Guaglianoni, W.C.; Braganca, S.R.; Bergmann, C.P., E-mail: pedroaugusto89@hotmail.com [Universidade Federal do Rio Grande do Sul (LACER/UFRS), Porto Alegre, RS (Brazil). Laboratorio de Materiais Ceramicos

    2016-07-01

    This study aimed to investigate the obtaining of nanostructured powders of spinel MA (MgAl2O4) via synthesis of combustion in solution (SCS), and the influence of its incorporation in oxidation resistance in natural graphites. The crystalline phase only was obtained after a heat treatment at 900 ° C of the powder as-synthesized. The powders were characterized by differential thermal analysis (DTA) and thermogravimetric (ATG) and crystallographic analysis by X-ray diffraction (XRD) and Raman spectroscopy. The results, using thermogravimetric dynamic and isothermal analysis showed a relationship between embedded content of spinel (as-synthesized and calcined) and the raising of the temperature to start the oxidation process (onset temperature) of the samples. The rate of oxidation is reduced at temperatures from 700 ° C, retarding the oxidation of graphite with increasing level of spinel, but this effect ceases at temperatures above 1000 ° C. (author)

  8. Response pattern's of immunoglobulins evaluation in different lineages of mice infected with T. cruzi; Avaliacao do padrao de resposta de imunoglobulinas em diferentes linhagens de camundongos frente a infeccao por T.cruzi

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Andreia dos Santos

    2006-07-01

    The present work has employed different mice lineages (A/J, C57BL/6, B6AF1, BXA1 and BXA2) that were challenged with different doses of T. cruzi. The objective was to evaluate the pattern of immunoglobulins response presented by resistant and susceptible mice to T. cruzi as well as the lineages developed from the matting between them. So that evaluation was done by using lineages serums' sample, analyzed by ELISA's method. In agreement with the results observed all the lineages presented higher response to IgG2a and IgG2b, if compared with the titles to IgG1. IgG1 immunoglobulins involve a type Th2 pattern response which expressed allergic immunological responses, while IgG2 involves a pattern response Th1 that expresses cellular immunological response. The different lineages used in this research also presented different immunological response pattern by the infection with T. cruzi. Mice of the lineage C57BL/6 are resistant to the infection, while the animals of the lineage A/J are susceptible. The animals of the lineage B6AF1 are more resistant to the infection than their original parental C57BL/6. The immunological response developed by hybrid mice present traces of both susceptible and resistant parental A/J and C57BL/6, respectively. The animals of the lineage BXA1 can be considered resistant to the infection, but they don't present the same control as that presented by those of the lineages B6AF1 and C57BL/6. The animals of the lineage BXA2 can be considered susceptible to the infection, but they can control it for a long period, surviving like this, longer than the animals of the lineage A/J. In addition it was observed that the IgG2b immunoglobulins are very important to the resistance of mice to T. cruzi infection. (author)

  9. Evaluation of the shield calculation adequacy of radiotherapy rooms through Monte Carlo Method and experimental measures; Avaliacao da adequacao do calculo de blindagens de salas de radioterapia atraves do metodo de Monte Carlos e medidas experimentais

    Energy Technology Data Exchange (ETDEWEB)

    Meireles, Ramiro Conceicao

    2016-07-01

    The shielding calculation methodology for radiotherapy services adopted in Brazil and in several countries is that described in publication 151 of the National Council on Radiation Protection and Measurements (NCRP 151). This methodology however, markedly employs several approaches that can impact both in the construction cost and in the radiological safety of the facility. Although this methodology is currently well established by the high level of use, some parameters employed in the calculation methodology did not undergo to a detailed assessment to evaluate the impact of the various approaches considered. In this work the MCNP5 Monte Carlo code was used with the purpose of evaluating the above mentioned approaches. TVLs values were obtained for photons in conventional concrete (2.35g / cm{sup 3}), considering the energies of 6, 10 and 25 MeV, respectively, first considering an isotropic radiation source impinging perpendicular to the barriers, and subsequently a lead head shielding emitting a shaped beam, in the format of a pyramid trunk. Primary barriers safety margins, taking in account the head shielding emitting photon beam pyramid-shaped in the energies of 6, 10, 15 and 18 MeV were assessed. A study was conducted considering the attenuation provided by the patient's body in the energies of 6,10, 15 and 18 MeV, leading to new attenuation factors. Experimental measurements were performed in a real radiotherapy room, in order to map the leakage radiation emitted by the accelerator head shielding and the results obtained were employed in the Monte Carlo simulation, as well as to validate the entire study. The study results indicate that the TVLs values provided by (NCRP, 2005) show discrepancies in comparison with the values obtained by simulation and that there may be some barriers that are calculated with insufficient thickness. Furthermore, the simulation results show that the additional safety margins considered when calculating the width of the

  10. Evaluation of the radiologic potential due to the nuclear submarine visits to the Rio de Janeiro port; Avaliacao do impacto radiologico potencial relativo a visita de submarinos nucleares ao Porto do Rio de Janeiro

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Jose Francisco

    2004-07-01

    Brazil is signatory of international protocols related to the visit of nuclear-powered vessels, aircraft carriers and submarines to Brazilian ports. The submarines, during their stay in Brazilian ports, inform that there is no release of radioactive material to the environment. However, the possibility of occurrence of accidents with environmental releases from PWR reactors is real. Between 1993 and 2003, 13 nuclear submarines visited Brazilian ports. This work aimed to evaluate the potential impact due to the visits of nuclear-powered ships and submarines to the port of the city of Rio de Janeiro, in relation to releases of radioactive materials to the environment, considering both routine releases and accidental situations. The models selected to perform the assessments took into account the scenarios to be simulated. Simple, but conservative methodologies were used for the evaluation of routine releases. For accidental releases, the dynamics of the materials dispersion into the environment were considered. The present study was mainly focalized on the initial phase of an accident. The doses for the crew of the Brazilian navy ships, for IRD teams performing environmental monitoring, and for the population around the Guanabara Bay, close to the points of anchorage, were assessed. The results indicated that, in normal operational conditions, no significant radiological impact due to the visit of nuclear submarines to the port of the city of Rio de Janeiro is expected, even considering the occurrence of small routine radionuclide releases. The analysis of accidental releases, however, indicated that the submarines should be located at a minimum distance of 2,5 km from inhabited areas in the coast of the Guanabara Bay. The need for environmental control and training of the teams involved in the attendance of the submarines, during the period of their visit, was also considered. The need for revising the procedures for the preoperational surveys to be performed at the

  11. Response pattern's of immunoglobulins evaluation in different lineages of mice infected with T. cruzi; Avaliacao do padrao de resposta de imunoglobulinas em diferentes linhagens de camundongos frente a infeccao por T.cruzi

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Andreia dos Santos

    2006-07-01

    The present work has employed different mice lineages (A/J, C57BL/6, B6AF1, BXA1 and BXA2) that were challenged with different doses of T. cruzi. The objective was to evaluate the pattern of immunoglobulins response presented by resistant and susceptible mice to T. cruzi as well as the lineages developed from the matting between them. So that evaluation was done by using lineages serums' sample, analyzed by ELISA's method. In agreement with the results observed all the lineages presented higher response to IgG2a and IgG2b, if compared with the titles to IgG1. IgG1 immunoglobulins involve a type Th2 pattern response which expressed allergic immunological responses, while IgG2 involves a pattern response Th1 that expresses cellular immunological response. The different lineages used in this research also presented different immunological response pattern by the infection with T. cruzi. Mice of the lineage C57BL/6 are resistant to the infection, while the animals of the lineage A/J are susceptible. The animals of the lineage B6AF1 are more resistant to the infection than their original parental C57BL/6. The immunological response developed by hybrid mice present traces of both susceptible and resistant parental A/J and C57BL/6, respectively. The animals of the lineage BXA1 can be considered resistant to the infection, but they don't present the same control as that presented by those of the lineages B6AF1 and C57BL/6. The animals of the lineage BXA2 can be considered susceptible to the infection, but they can control it for a long period, surviving like this, longer than the animals of the lineage A/J. In addition it was observed that the IgG2b immunoglobulins are very important to the resistance of mice to T. cruzi infection. (author)

  12. Clinicoradiologic evaluation of styloid process calcification

    Energy Technology Data Exchange (ETDEWEB)

    Bagga, Mun Bhawni [Dept. of Oral Medicine Diagnosis and Radiology, M.N. D.A.V. Dental College and Hospital, Solan (Korea, Republic of); Kumar, C. Anand; Yeluri, Garima [Dept. of Oral Medicine Diagnosis and Radiology, KD Dental College and Hospital, Mathura (Korea, Republic of)

    2012-09-15

    This study was performed to investigate the prevalence, morphology, and calcification pattern of the elongated styloid process in the Mathura population and its relation to gender, age, and mandibular movements. The study analyzed digital panoramic radiographs of 2,706 adults. The elongated styloid process was classified with the radiographic appearance based on the morphology and calcification pattern. The limits of mandibular protrusion were evaluated for each subject. The data were analyzed by using a Student's t-test and chi-squared test with significance set at p=0.05. Bilateral elongation having an 'elongated' type styloid process with a 'partially mineralized' pattern was the most frequent type of styloid process. No correlation was found between styloid process type and calcification pattern on the one hand and gender on the other, although elongated styloid was more prevalent in older and male populations (p<0.05). Further styloid process elongation showed no effect on mandibular protrusive movement (p>0.05). Dentists should recognize the existence of morphological variation in elongated styloid process or Eagle syndrome apparent on panoramic radiographs. We found higher prevalence of elongated styloid process in the population of the Mathura region when compared with other Indian populations. The calcification of the styloid process was more common in the older age group with no correlation to gender, mandibular movement and site. 'Type I' with a 'partially calcified' styloid process was observed more frequently in the population studied.

  13. Evaluation of the efficiency of a plug-flow digester to produce biogas from swine waste water; Avaliacao da eficiencia de um biodigestor tubular na producao de biogas a partir de aguas residuarias de suinocultura

    Energy Technology Data Exchange (ETDEWEB)

    Feiden, Armin [Universidade Estadual do Oeste do Parana (UNIOESTE), Marechal Candido Rondon, PR (Brazil). Centro de Ciencias Agrarias; Reichl, Johann [Escola de Energia Biolsolar, Quatro Pontes, PR (Brazil); Schwab, Jair; Schwab, Vera [Colegio Estadual Entre Rios do Oeste, PR (Brazil)

    2004-07-01

    The performance of a plug-flow digester, type Reichl, was evaluated with and without mixing. The digester, treating swine wastewater, had a capacity of 800 m{sup 3} and were operated at a loading rate of 0,931 kg and 0,634 kg of total solids and volatile solids per day, respectively. With mixing, the daily average biogas production was 289,50 m{sup 3} day{sup -1}, the specific volume production of 0,362 m{sup 3} biogas m{sup -3} reactor day{sup -1} and a specific biogas production of 0,389 m{sup 3} and 0,571 m{sup 3} biogas kg{sup -1} total solids and volatile solids added, respectively. Without mixing, was observed a reduction of 17,69% on the daily average biogas production, to only 238,30 m{sup 3} day{sup -1}. It correspond to a specific volume production of 0,298 m{sup 3} biogas m{sup -3} reactor day{sup -1} and a specific biogas production of 0,320 m{sup 3} and 0,470 m{sup 3} biogas kg{sup -1} total solids and volatile solids added, respectively. With mixing, a reduction of 68,67% total solids was achieved, compared to 52,11% without mixing. Considering volatile solids, it was achieved 80,16% with mixing, compared to 58,77% without mixing. (author)

  14. The use of dynamic computation systems in the evaluation of the damages caused by oil spill; O uso de sistemas computacionais dinamicos na avaliacao dos danos causados por derrames de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Barbosa, Luiz H.C.; Laurino, Luiz S.; Muelbert, Jose H. [Fundacao Universidade Federal do Rio Grande (FURG), RS (Brazil)

    2004-07-01

    Estuarine areas are zones of great environmental risk characterized as great sensitivity to oil and oil products spills. Traditionally, Geographic Information Systems (GIS) are used to evaluate these possible impacts. However, for some groups of organisms, like plankton, the spatial limitations of GIS become inadequate because their distributions exhibits temporal variability and are associated with dynamic environmental factors. Having this in mind, the development of a specific tool is necessary to supply this need. For the development of this tool, data of fish larvae and eggs (ichthyoplankton) from the Lagoa dos Patos Estuary (RS) were chosen as an initial group for the development of a Plankton Diagnostic System (SIDIPLA). These groups have an accentuated sensitivity to oil spills. This impact could directly affect the environment quality and indirectly the local fishing resource. SIDIPLA is elaborated from data reports covering every estuarine area and graphs are generated containing abundance of the species of fish larvae and eggs from the geographical position, season, temperature and salinity; selected by the user from an Internet page (http://corvina.lei.furg.br/sidipla). Several simulations demonstrated the strength of the system and its easy use. Furthermore this tool can be implemented in different places of the Brazilian coast and different groups of organisms. (author)

  15. Project and evaluation of a 2000 meter offshore horizontal well production extra-heavy oil; Projeto e avaliacao de um poco offshore com 2000 m de trecho horizontal produtor de oleo extra-pesado

    Energy Technology Data Exchange (ETDEWEB)

    Ueta, Eduardo M.; Kato, Edson T.; Tinoco, Francisco L.; Vieira, Paulo M.F. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2004-07-01

    The project was proposed to acquire reservoir data, for the development of the Member (Mb) Siri in the concession of Badejo in Campos Basin, having extra-heavy oil, through long and large bore horizontal well. The main objectives were: to obtain the petrophysical properties through continuous coring of the oil and water zones; water sampling for the characterization; to verify the effective length of the horizontal well through production logging; to obtain the reservoir productivity and permeability through formation test; to obtain the oil PVT properties through monophasic sampling and to know the lateral variability of the accumulation. New technologies were used as geochemical geosteering, diversionary acidification and chemical tracer production logging. The well test analysis showed permeability and productivity values better than as expected and making possible the development of pilot project in order to evaluate the aquifer behavior, the long term well productivity and performance of the elevation and behavior of the extra-heavy oil offloading for subsequent development of the reservoir. (author)

  16. Radiometric evaluation of graves of victims of the accident with Cesium 137 in Goiania, GO, Brazil: 25 years after; Avaliacao radiometrica das sepulturas das vitimas do acidente com o Cesio 137 em Goiania: 25 anos apos

    Energy Technology Data Exchange (ETDEWEB)

    Lage, Leonardo B.; Correa, Rosangela da S.; Santos, Eliane E. dos, E-mail: leonardobl@cnen.gov.br, E-mail: rcorrea@cnen.gov.br, E-mail: esantos@cnen.gov.br [Centro Regional de Ciencias Nucleares do Centro-Oeste (CRCN-CO/CNEN-GO), Abadia de Goias, GO (Brazil); Freitas-Junior, Ruffo, E-mail: uffojr@terra.com.br [Universidade Federal de Goias (UFG), Goiania, GO (Brazil). Faculdade de Medicina. Programa de Mastologia

    2013-07-01

    Twenty-five years after the radiation accident in Goiania, this study aims to evaluate the radiological situation in the area demarcated by the graves of the victims of the accident with cesium-137. Radiometric survey was carried out on the surface that encompasses the four graves and vicinity, from a pre-established mesh. Dose rate measurements were carried out, using the IdentFINDER equipment, positioned at 1 m height from the ground. The values of dose rates at the points measured ranged from 0.03 to 0.07 μSv/h. This variation of dose rate is less than those obtained in the local graveyard and are in the range of background radiation observed in Goiania. Considering the results obtained 25 years after the accident, it was concluded that engineering barriers adopted at that time are effective, stating the place absolutely safe from a radiological point of view, both for the individual from the public as to the environment.

  17. Evaluation of the biogas potential using in the equipment utilized in milk production systems; Avaliacao do potencial do emprego do biogas nos equipamentos utilizados em sistemas de producao de leite

    Energy Technology Data Exchange (ETDEWEB)

    Hardoim, Paulo Cesar; Goncalves, Adriano Dicesar M.A. [Lavras Univ. Federal, MG (Brazil). Dept. de Engenharia

    2000-07-01

    The technology of the anaerobic digestion has been checked as one of the most efficient in the treatment of the dejection of bovine, however, the employment of the biogas as source of energy for the operation of the equipment still finds limitations of technological order. The present work evaluated, the great potential of the treatment anaerobic of the residues of bovine destined the production of milk as source energy renewably , inside of a concept of maintainable development and production rationalization without aggression to the Middle-Atmosphere. It also verified that technology is adapted as conservation strategy and efficient energy use. The employment of the anaerobic digestion in the treatment of the dejection is possible and desirable, once it contributes to preservation of the environment, it makes possible the modern confinement systems and it reduces the production cost. The residues of milk cows produced, can be used as resources of supplies, so much of energy as of fertilizer. In a confinement of 100 cows, a biodigester can produce a volume of 118 m{sup 3} of biogas. Volume this enough one to work a generating group of 15 kVa and this to assist with electric energy the demand of the milk installation and bomb of water. The total demand of biogas can working with these equipment is esteemed in 85,3m{sup 3} of biogas, what can be supplied with rest by the biodigester. (author)

  18. Evaluation of energy efficiency of climatization system in dairy cattle free-stall; Avaliacao da eficiencia energetica de sistemas de climatizacao em galpoes tipo 'free-stall' para confinamento de bovinos leiteiros

    Energy Technology Data Exchange (ETDEWEB)

    Perissinoto, Mauricio [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil). Dept. de Engenharia Rural. Setor de Construcoes Rurais], Email: mperissi@esalqusp.br; Moura, Daniella Jorge de; Lima, Karla Andrea Oliveira de; Mendes, Angelica Signor [Universidade Estadual de Campinas (FEAGRI/UNICAMP), SP (Brazil). Fac. de Engenharia Agricola; Matarazzo, Soraia Vanessa

    2006-07-01

    The objective of this research was the evaluation of the economical efficiency, in relation to water and energy expenses, of two different evaporative cooling systems, misting and sprinkler, associated with forced ventilation. The study was carried out in a commercial dairy cattle farm located in a small city of Sao Paulo State. The experimental period was twenty-eight consecutive days of November 2003. For the economical analysis of each system of climatization the cost with electrical energy and water expended in each system was considered and also the feeding consumption. The sprinkling cooling system presented a greater consumption of water and energy than the misting system. Even those treatments promoting similar feed intake (the difference was 3.0 kg DM.animal{sup -1}.month{sup -1}), the sprinkling system associated to forced ventilation led to an increase (18.0 liters.animal{sup -1}.month{sup -1}) of 3% in milk production. As consequence, it was observed an increase of 5,8% in total month profit in relation to misting system. (author)

  19. Evaluation of the conditions and practices of radiological protection technicians in radiology, according to Ordinance 453; Avaliacao das condicoes e das praticas de protecao radiologica dos tecnicos em radiologia, segundo a portaria 453

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Rogerio Ferreira da

    2013-10-01

    Professionals in radiology suffer whole body exposure to low doses for long periods . The system of radiological protection should keep exposures below recommended thresholds, thus avoiding the stochastic effects that can be triggered with any dose level value, and there is not a threshold for induction of the same. Therefore it is important to use personal dosimeter for monitoring doses and protective equipment. The increase in procedures using ionizing radiation in recent years has been noted with concern, since many companies are not complying with the standards of protection. This is because some procedures may be performed without the need of surgery, which presents a greater risk to the patient. Furthermore, Brazilians are being exposed to radiation without necessity. The reasons range from radiological equipment miscalibrated to poorly trained staff. Thus we evaluate the conditions and practices of radiation protection technicians in radiology according to Ordinance 453 in Goiania, GO, Brazil. Through a descriptive survey with a quantitative approach, we used the technique of gathering information based on a questionnaire. From this survey, we identified the procedures used by radiation protection professionals and concluded that there are failures in the procedures for protecting patients and accompanying and in the training of the professionals. (author)

  20. Evaluation of a diesel engine running with stationary mixtures of soybean oil and reused oil diesel; Avaliacao de um motor diesel estacionario funcionando com misturas de oleo de soja reutilizado e oleo diesel

    Energy Technology Data Exchange (ETDEWEB)

    Maronhas, Maite E.S.; Fernandes, Haroldo C.; Siqueira, Wagner C.; Figueiredo, Augusto C. [Universidade Federal de Vicosa (UFV), MG (Brazil)], Emails: maronhas@gmail.com, haroldo@ufv.br, augusto.figueiredo@ufv.br

    2009-07-01

    The tests were conducted at the Laboratory of Agricultural Mechanization Department of Agricultural Engineering, Federal University of Vicosa using a stationary diesel engine Yanmar brand NS{sub B} 75, with nominal power of 5.8 kw at 2400 rpm, direct injection, and water cooled. This work aimed to examine the reuse of soybean oil to drive the engine stationary. Were used as fuel five mixtures of diesel oil (DO) and soybean oil (OS) re-used in the kitchen of the restaurant of the university in the proportions of 0-100%, 25-75%, 50-50%, 75-25 % and 100-0% respectively. The power and torque of the engine is higher for the mixture showed a 75% OD and 25% OS and 25% lower for DO and 75% OS. The lowest hourly consumption was with a mixture of 25% and 75% OD and OS was 15% lower than for the pure diesel. The values found justifying the use of mixtures of diesel and soybean oil reused, but the technical aspects, especially regarding the wear of the engine, must be evaluated to indicate the use after a long period of engine operation. (author)

  1. Evaluation of low intensity laser effects in the thyroid glands region of male mice; Avaliacao dos efeitos do laser em baixa intensidade na regiao da glandula tireoide de camundongos

    Energy Technology Data Exchange (ETDEWEB)

    Azevedo, Luciane Hiramatsu

    2002-07-01

    Recent studies have demonstrated that the infra-red laser can cause alterations in thyroid glands. Their normal activity must be preserved, as they produce the thyroidal hormones triiodothyronine (T{sub 3}) and thyroxine (T{sub 4}), that stimulate the oxidative metabolism, essential to maintain a healthy organism. The increase or diminution of these hormones results in alteration of the mitochondria's activity, that determines the secondary effects in the metabolism. The purpose of this study was to evaluate if there was any alteration of the thyroidal hormones plasma levels under irradiation from infra-red laser, with energy density of 4J/cm{sup 2}, in the region of thyroid glands of male mice. It was concluded that there was an hormonal level alteration statistically significant between the first day of irradiation and seven days after the last application. Histological studies showed that there was no morphological changes in histological sections of thyroid glands. The optical absorption spectroscopy of mice's serum presented a peak at approximately 280 nm, attributed to tyrosine (this is the amino acid compounding these hormones). (author)

  2. Evaluation of epileptogenic focus in temporal lobe: correlation between ictal brain SPECT, magnetic resonance imaging and magnetic resonance spectroscopy; Avaliacao de foco epileptogenico do lobo temporal: correlacao entre SPECT ictal, ressonancia magnetica e ressonancia magnetica com espectroscopia de protons

    Energy Technology Data Exchange (ETDEWEB)

    Diegues, Maria Elena Martins [Hospital Universitario Clementino Fraga Filho, Rio de Janeiro, RJ (Brazil). Servico de Medicina Nuclear]. E-mail: emartyns@terra.com.br; Pellini, Marcos Pinto; Alves-Leon, Soniza Vieira [Universidade Federal, Rio de Janeiro, RJ (Brazil). Faculdade de Medicina; Domingues, Romeu Cortes [Clinica de Diagnostico por Imagem (CDPI), Rio de Janeiro, RJ (Brazil)

    2004-02-01

    The purpose of this study was to determine the degree of concordance between radiological and radioisotopic methods and, if positive, to evaluate the usefulness of ictal SPECT in the localization of the epileptogenic focus. Ictal brain SPECT, magnetic resonance imaging (MRI) and magnetic resonance spectroscopy (MRS) were performed on six patients with refractory temporal lobe epilepsy. Ictal SPECT was performed after withdrawal of the anti-epileptogenic drugs during video-EEG monitoring, using {sup 99m}Tc-ECD, administered to patients at the time of the ictus. MRI was performed in T1, T2 and FLAIR sequences and MRS was obtained using the PRESS technique, with a single voxel positioned in both hippocampi. The statistical analysis included the determination of the values of Kappa (k), standard error (se) and significance level (p) for the lateralization of the ictal focus. The analysis of all findings was based on EEG localization of the ictal discharge, seizure duration (109-280 s; 152 s average) and time of radiotracer injection (30-262 s; 96 s average). We obtained correlated data in four patients (67 per cent) and values of k = 0.67, se = 0.38, and p 0.041. We concluded that there is a concordance between ictal SPECT, MRI and MRS data and the usefulness of the radioisotopic procedure is related to a non diagnostic EEG and when there is a discordant or misleading diagnosis after a comparative analysis of EEG and MRS. (author)

  3. Evaluation of the susceptibility to corrosion by pites of supermartensitic stainless steel with different superficial finishing; Avaliacao da susceptibilidade a corrosao por pites do aco inoxidavel supermartensitico com diferentes acabamentos superficiais

    Energy Technology Data Exchange (ETDEWEB)

    Freitas, Mario Jose Bueno de Souza

    2015-07-01

    The objective of this study is to evaluate the susceptibility by pitting corrosion in a supermartensitic stainless steel (13%Cr) with different surface finishes, in an environment that simulates the conditions found in the range of the Brazilian marine subsoil before the dense layer of salt - the so-called pre-salt. In this study were conducted electrochemical tests of potentiodynamic anodic polarization and electrochemical impedance spectroscopy (EIS) in environment containing 35, 50 and 190 g/L of NaCl and dissolved oxygen concentrations <10, 100 and 500ppb. Were also used the techniques of Moessbauer spectroscopy and EDS (Energy Dispersive Spectrometry) coupled to a scanning electron microscope (SEM) for microstructural characterization of 13%Cr steel. It was observed by the electrochemical tests, the increase in the concentration of chloride ions in solution makes the studied steel more susceptible to localized corrosion. It was also observed that the material showed less susceptibility to pitting corrosion when its surface was less rough. (author)

  4. Evaluation of eco toxicity, biocide effectiveness and corrosiveness of fluid for pipelines hydro testing; Avaliacao da ecotoxicidade, eficiencia biocida e da corrosividade de fluidos para teste hidroestatico de dutos

    Energy Technology Data Exchange (ETDEWEB)

    Andrade, Cynthia A.; Veiga, Leticia F.; Penna, Monica O.; Souza, Leonardo S. [PETROBRAS, Rio de Janeiro, RJ (Brazil); Nascimento, Juliana R.; Oliveira, Fabio F.; Amigo, Alexandre A.; Chaves, Claudia [Fundacao Gorceix, Ouro Preto, MG (Brazil)

    2005-07-01

    Before the installation of subsea pipelines for draining the oil and gas production, the line need to be submitted to hydrostatic tests. In these, the lines are flooded with sea water and chemicals and pressurized to check the leakage occurrence. By the end of the test, the fluid needs to be discharged in-situ. Based on the environmental restrictions, this study began, and the three most important aspects in relation to the environmental risks had been evaluated: the toxicity, the biocide efficiency and the fluids' corrosiveness. By the partial results, it was observed that the fluids which had presented the best results in all studied aspects were the ones that contained the biocide THPS, combined with U.V. and a quaternary salt. In relation to the corrosion, it could be established that the studied fluids do not present impacts in internal corrosion, since during the test, the pipes are totally flooded with the fluid, remaining stamped and all the internal air having been removed. An important aspect is: even with concentrations below of the recommended ones for biocides, in order to guarantee lower environmental risks, by making use of alternative techniques (U.V.) and efficient biocide products, it is also possible to reach success in terms of biocide's efficiency. A regular monitoring procedure of the fulfilling fluid's quality is essential. (author)

  5. Evaluation of occupational radiation dose in nuclear medicine: radiopharmaceutical administration to scintiscanning exams of myocardial perfusion; Avaliacao da dose de radiacao ocupacional em medicina nuclear: administracao de radiofarmacos em exames de cintilografria de perfusao miocardica

    Energy Technology Data Exchange (ETDEWEB)

    Komatsu, Cassio V., E-mail: cassiok@yahoo.com [Medicina Nuclear do Triangulo (MNT), Uberlandia, MG (Brazil); Michelin, Charlie A.; Jakubiak, Rosangela R., E-mail: charlie@utfpr.edu.br, E-mail: requi@utfpr.edu.br [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Lemes, Alyne O.; Silva, Juliana L.M., E-mail: alyne275@gmail.com, E-mail: jujumontesdocinho@gmail.com [Faculdade do Trabalho (FATRA), Uberlandia, MG (Brazil)

    2013-11-01

    In nuclear medicine, workers directly involved in exams are constantly exposed to ionizing radiation. The procedure for administration of the radiopharmaceutical to the patient is one of the most critical times of exposure. In tests of myocardial perfusion scintigraphy (MPS) administration of radiopharmaceutical repeats the steps of rest and cardiac stress. In this study, we used a Geiger -Mueller detector for measuring occupational radiation doses for during the administration of technetium- {sup 99m}- sestamibi in MPS tests. In the evaluation, discriminated the stages of examination and related professional experience time to doses measures at home. It were followed 110 procedures at home (55 conducted by professionals with over 5 years experience and 55 conducted by professionals with less than 1 year of experience) and 55 effort procedures. The results showed that the rest of the procedure time and dose are related to the experience of the worker. More experienced workers were faster (mean: 43 {+-} 16 vs 67 {+-} 25 seconds / procedure), and therefore received lower doses (mean 0.57 {+-} 0.16 versus 0.80 {+-} 0.24 {mu}Sv / procedure), both with statistical significance (p <0.001). In step effort, there were procedures lasting longer (mean: 19 {+-} 2 minutes / procedure), which resulted in higher doses (mean 3.0 {+-} 0.6 {mu}Sv / procedure)

  6. Dosimetric evaluation of a combination of brachytherapy applicators for uterine cervix cancer with involvement of the distal vagina; Avaliacao dosimetrica de uma combinacao de aplicadores para braquiterapia de tumores do colo uterino com acometimento da porcao distal da vagina

    Energy Technology Data Exchange (ETDEWEB)

    Guimaraes, Roger Guilherme Rodrigues [Real e Benemerita Sociedade Portuguesa de Beneficencia, Sao Paulo, SP (Brazil). Servico de Radioterapia Estereotactica; Carvalho, Heloisa de Andrade; Stuart, Silvia Radwanski; Rubo, Rodrigo Augusto [Universidade de Sao Paulo (USP), SP (Brazil). Hospital das Clinicas. Servico de Radioterapia], e-mail: handrade@hcnet.usp.br; Seraide, Rodrigo Migotto [Centro de Oncologia Campinas, SP (Brazil)

    2009-07-15

    Objective: To evaluate an alternative brachytherapy technique for uterine cervix cancer involving the distal vagina, without increasing the risk of toxicity. Materials And Methods: Theoretical study comparing three different high-dose rate intracavitary brachytherapy applicators: intrauterine tandem and vaginal cylinder (TC); tandem/ring applicator combined with vaginal cylinder (TR+C); and a virtual applicator combining both the tandem/ring and vaginal cylinder in a single device (TRC). Prescribed doses were 7 Gy at point A, and 5 Gy on the surface or at a 5 mm depth of the vaginal mucosa. Doses delivered to the rectum, bladder and sigmoid colon were kept below the tolerance limits. Volumes covered by the isodoses, respectively, 50% (V50), 100% (V100), 150% (V150) and 200% (V200) were compared. Results: Both the combined TR+C and TRC presented a better dose distribution as compared with the TC applicator. The TR+C dose distribution was similar to the TRC dose, with V150 and V200 being about 50% higher for TR+C (within the cylinder). Conclusion: Combined TR+C in a two-time single application may represent an alternative therapy technique for patients affected by uterine cervix cancer involving the distal vagina. (author)

  7. Performance evaluation of a direct injection engine using different blends of soybeans methyl biodiesel; Avaliacao do desempenho de um motor de injecao direta utlizando diferentes misturas de biodiesel metilico de soja

    Energy Technology Data Exchange (ETDEWEB)

    Nietiedt, G.H.; Schlosser, J.F.; Uhry, D.; Casali, A.L.; Ribas, R.L. [Universidade Federal de Santa Maria (UFSM), RS (Brazil)], email: gustavoheller@hotmail.com

    2011-07-01

    The diesel fuel is used widely in the country and the world. However, growing environmental awareness leads to a larger demand for renewable energy resources. The pioneering in the use of ethanol makes Brazil also consolidate itself in the use of the biodiesel in larger scales, in replacement or as a blend with mineral diesel. Thus, this work aimed to evaluate the use of soybeans methyl biodiesel blends and diesel in an ignition compression engine with fuel direct injection. The tests were performed on a dynamometer bench, using the blends B10, B20 and B100 in comparison to the commercial diesel (B5). The engine performance was analyzed by tractor power take off (PTO) for each fuel, and the best results obtained for the power and the specific fuel consumption, respectively, were: B5 (44,62 kW; 234,87 g/kW.h{sup -1}); B10 (44,73 kW; 233,78 g/kW.h{sup -1}); B20 (44,40 kW; 236,20 g/kW.h{sup -1}) e B100 (43,40 kW; 263,63 g/kW.h{sup -1}). The best performance happened on the use of B5 and B10 fuel, without significant differences between these blends. The B100 fuel showed significant differences compared to the other fuels. (author)

  8. Mapping of isoexposure curves for evaluation of equivalent environmental doses for radiodiagnostic mobile equipment; Mapeamento de curvas de isoexposicao para avaliacao de equivalente de dose ambiente para equipamentos moveis de radiodiagnostico

    Energy Technology Data Exchange (ETDEWEB)

    Bacelar, Alexandre, E-mail: abacelar@hcpa.ufrgs.b [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Hospital de Clinicas. Setor de Fisica Medica e Radioprotecao; Andrade, Jose Rodrigo Mendes, E-mail: jose.andrade@santacasa.tche.b [Irmandade da Santa Casa de Misericordia de Porto Alegre, RS (Brazil). Servico de Atencao a Saude e Qualidade de Vida; Fischer, Andreia Caroline Fischer da Silveira; Accurso, Andre; Hoff, Gabriela, E-mail: andreia.silveira.001@acad.pucrs.b, E-mail: andre.accurso@acad.pucrs.b [Pontificia Univ. Catolica do Rio Grande do Sul (PUC/RS), Porto Alegre, RS (Brazil). Grupo de Experimentacao e Simulacao Computacional em Fisica Medica

    2011-10-26

    This paper generates iso exposure curves in areas where the mobile radiodiagnostic equipment are used for evaluation of iso kerma map and the environment equivalent dose (H{sup *}(d)). It was used a Shimadzu mobile equipment and two Siemens, with non anthropomorphic scatter. The exposure was measured in a mesh of 4.20 x 4.20 square meter in steps of 30 cm, at half height from the scatterer. The calculation of H{sup *}(d) were estimated for a worker present in all the procedures in a period of 11 months, being considered 3.55 m As/examination and 44.5 procedures/month (adult UTI) and 3.16 m As/examination and 20.1 procedure/month (pediatric UTI), and 3.16 m As/examination and 20.1 procedure/month (pediatric UTI). It was observed that there exist points where the H{sup *}(d) was over the limit established for the free area inside the radius of 30 cm from the central beam of radiation in the case of pediatric UTI and 60 cm for adult UTI. The points localized 2.1 m from the center presented values lower than 25% of those limit

  9. Evaluation of the dose absorbed by the thyroid of patients undergoing treatment of Graves disease;Avaliacao da dose absorvida pela tireoide de pacientes submetidos ao tratamento da doenca de Graves

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Tiago L.; Filho, Joao A. [Universidade Catolica de Pernambuco (UNICAP), Recife, PE (Brazil). Dept. de Fisica; Silva, Jose M.F. da [Universidade Federal de Pernambuco (DEN/UFPE), Recife, PE (Brazil). Dept. de Energia Nuclear

    2009-07-01

    The radioiodine is used as complementary treatment of thyroid cancer and as first choice for the treatment of Graves' disease, being efficient, safe and easy administration, but without there is a protocol defined. This work was evaluated the thyroid absorbed dose from its mass and maximum uptake of I-131 obtained in the examination of diagnostic radiology of radiotherapeutic patients undergoing treatment of Graves' disease. Based on the results, it is observed that the thyroid absorbed dose, as much in terms of mass as the maximum uptake of I-131 for different values of administered activity, varies significantly. The analysis of these parameters is an excellent indicator for the pre-define quantity of radionuclide that is administered to the patient in terms of the radiation dose required to achieve an efficient therapeutic treatment. Moreover, it was observed that the thyroid absorbed dose depends on the degree of pathology of the disease, its mass and of the maximum uptake of I-131. (author)

  10. Methodology to evaluate the energy associated to the industrial solid wastes: application in a metropolitan region of Campinas, Sao Paulo state, Brazil; Metodologia para avaliacao da energia associada ao residuo solido industrial: aplicacao a regiao metropolitada de Campinas

    Energy Technology Data Exchange (ETDEWEB)

    Batista, Tereza Rosana Orrico [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Curso de Pos-graduacao em Planejamento de Sistemas Energeticos; Teixeira, Egle Novaes [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Fac. de Engenharia Civil, Arquitetura e Urbanismo; Silva, Ennio Peres da [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico. Lab. de Hidrogenio

    2004-07-01

    The aim of this work is to the application of a methodology to evaluate the energy associated to the industrial solid wastes in the metropolitan region of Campinas. The methodological route proposed is: the characterization of the research area and the production/management of the industrial solid wastes; the energetic classification and the qualitative/quantitative research of the energy associated to the industrial solid wastes; and, the valuation of the applicability of the energetic utilization mechanisms proposed to the region. This methodology when applied at the Campinas metropolitan region proved to be valid and it resulted in a synthetically presentation of the social and environmental reality of the industrial sector and the destination of the wastes, as well as it indicated the potentialities related to the energetic utilization of the industrial solid waste in the region. With the obtained results it was shown the importance of the the production and the destination of the industrial solid wastes in the Campinas metropolitan region , and the meaning, in terms of electric potency, of the values of the energy associated to the wastes with a known factor of energetic conversion shown in the researched sample. (author)

  11. Evaluation of human dental loss caused by carbamide peroxide bleacher compared with phosphoric acid conditioning - radioactive method; Avaliacao da perda dental humana com o uso do clareador peroxido de carbamida comparado ao condicionamento com acido fosforico - metodo radiometrico

    Energy Technology Data Exchange (ETDEWEB)

    Adachi, Eduardo Makoto; Yousseff, Michel Nicolau [Sao Paulo Univ., SP (Brazil). Faculdade de Odontologia. Dept. de Dentistica; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Lab. de Analise por Ativacao Neutronica

    2002-07-01

    The radiometric method was applied to the evaluation of dental loss caused by carbamide peroxide when it is applied on the surface layers of enamel and dentin tissues. Also the dental loss caused by the etching with 37% phosphoric acid procedure used in aesthetic restoration was assessed for comparison with those results obtained. The tooth samples irradiated with a P standard in a thermal neutron flux of the nuclear reactor were placed in contact with 10% carbamide peroxide or with 37% phosphoric acid solution. The radioactivity of {sup 32} P transferred from the radioactive teeth to the bleaching gel or to etching acid was measured using a Geiger Muller detector to calculate the mass of P removed in this treatment and losses were calculated after obtaining their P concentrations. Results obtained indicated that enamel and dentin exposed to carbamide peroxide bleaching agent lose phosphorus. The extent of enamel loss was smaller than that obtained for dentin. In the case of acid etching, there was no difference between the results obtained for enamel and dentin loss. Also the dentin loss obtained after a treatment of 30 applications of 10% carbamide peroxide was the same magnitude of that one application of 37% phosphoric acid. (author)

  12. Hanford phosphate precipitation filtration process evaluation

    International Nuclear Information System (INIS)

    Walker, B.W.; McCabe, D.J.

    1997-01-01

    The purpose of this filter study was to evaluate cross-flow filtration as effective solid-liquid separation technology for treating Hanford wastes, outline operating conditions for equipment, examine the expected filter flow rates, and determine proper cleaning. A proposed Hanford waste pre-treatment process uses sodium hydroxide at high temperature to remove aluminum from sludge. This process also dissolves phosphates. Upon cooling to 40 degrees centigrade the phosphates form a Na7(PO4)2F9H2O precipitate which must be removed prior to further treatment. Filter studies were conducted with a phosphate slurry simulant to evaluate whether 0.5 micron cross-flow sintered metal Mott filters can separate the phosphate precipitate from the wash solutions. The simulant was recirculated through the filters at room temperature and filtration performance data was collected

  13. Evaluation of the physico-chemical properties of nanocomposites of low density linear polyethylene and organophilic montmorillonite obtained by fusion; Avaliacao das propriedades fisico-quimicas de nanocompositos de polietileno linear de baixa densidade e montmorilonita organofilica obtidos por fusao

    Energy Technology Data Exchange (ETDEWEB)

    Arndt, Aline; Sandrin, Bianca M.; Pezzin, A.P.T., E-mail: anapezzin@yahoo.com.br [Universidade da Regiao de Joinville (UNIVILLE), SC (Brazil); Meier, Marcia M. [Universidade do Estado de Santa Catarina (UESC), Joinville, SC (Brazil). Departamento de Quimica; Balzer, Palova S. [Centro Universitario Unisociesc, Joinville, SC (Brazil). Departamento de Engenharia Mecanica; Tavares, Maria I.B. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil). Laboratorio de Solucoes em Ralaxometria

    2016-07-01

    In this project they were produced and characterized nanocomposite organoclay applied to linear low density polyethylene in order to improve their physicochemical properties. Samples were produced by means of extrusion and injection process, varying proportions of nanoclay (2; 2.5; 3.0 and 3.5%) in LLDPE. Samples nanocomposites were characterized by TGA, DSC and Flammability test (UL-94). The TGA analysis showed that adding nanoclay increased thermal stability, especially for LLDPE / OMMT2,0 sample increased thermal stability at 4.4%. By DSC it was found that samples with nanoclay incorporation did not affect the Tm of LLDPE, though the increase of nanoclay raised the degree of crystallinity of the samples 52.7% in LLDPE / 2.5 OMMT sample. The flammability results show that the sample LLDPE / OMMT 2.0 showed a decrease of 37.77% in the flame propagation velocity. The NMR showed that the samples up LLDPE / 2.5 OM has an exfoliated nanocomposite formation. (author)

  14. Evaluation of irradiated essential oils to control of Sitophilus zeamais Mots. (Coleoptera: Curculionidae) and Blatella germanica (L.) (Dictyopera: Blattellidae); Avaliacao de produtos naturais irradiados para o controle de Sitophilus zeamais Mots. (Coleoptera: Curculionidae) e Blatella germanica (L.) (Dictyopera: Blattellidae)

    Energy Technology Data Exchange (ETDEWEB)

    Potenza, Marcos Roberto

    2004-07-01

    This work aimed to evaluate the effect of irradiated essential oils of Eucalyptus citriodora, Eucalyptus globulus, Pinus sp., Azadirachta indica, Cymbopogon nardus, Cupressus sempervirens, Cymbopogons citratus and Juniperus communis and aqueous, hexanic and ethanolic irradiated extracts of Solanum paniculatum, Dahlia pinnata, Lycopersicon esculentum, Nephrolepis pectinata, Ruta graveolens, Ficus elastica, Lavandula angustifolia, Rhododendron simsii, Agave angustifolia, Ocimum basilicum, Allamanda cathartica, Dieffenbachia brasiliensis, Pennisetum purpureum, Annona squamosa, Coffea arabica and Hibiscus rosa-sinensis, in order to identify new substances to integrated pest management (IPM) and to observe possible effects of gamma radiation about extracts and essential oils efficiency such as increase, reduction, activation and inactivation of the same to the pest control. It evaluated the effect of contact on Sitophilus zeamais and by ingestion in Blattella germanica. To irradiation was used an experimental irradiator of Cobalt-60, type Gammacell 220. The essential oils were submitted increasing doses of gamma radiation: 2.5; 5.0; 7.5 and 10.0 kGy. The bioassay with B. germanica demonstrated efficiency between 22.0 e 30.0% and between 30.0 and 42.0%, respectively, to irradiated essential oils of E. citriodora and E. globulus and they demonstrated too repellency to the nymphs. The gamma radiation used promoted changes in essential oils of E. citriodora e E. globulus that they began to show efficiency on B. germanica nymphs besides a significant reduction of repellency. Essential oils of Pinus sp., A. indica, C. sempervirens and J. communis did not display efficiency. The essential oils of C. nardus, and C. citratus had low efficiency. The gamma radiation increased the efficiency of ethanolic extract of D. Pinnata with dose of 7.5 kGy, showing 48.0% of efficiency on B. germanica nymphs. The gamma radiation showed adverse effect on the aqueous extract of R. Graveolens

  15. Evaluation of irradiated essential oils to control of Sitophilus zeamais Mots. (Coleoptera: Curculionidae) and Blatella germanica (L.) (Dictyopera: Blattellidae); Avaliacao de produtos naturais irradiados para o controle de Sitophilus zeamais Mots. (Coleoptera: Curculionidae) e Blatella germanica (L.) (Dictyopera: Blattellidae)

    Energy Technology Data Exchange (ETDEWEB)

    Potenza, Marcos Roberto

    2004-07-01

    This work aimed to evaluate the effect of irradiated essential oils of Eucalyptus citriodora, Eucalyptus globulus, Pinus sp., Azadirachta indica, Cymbopogon nardus, Cupressus sempervirens, Cymbopogons citratus and Juniperus communis and aqueous, hexanic and ethanolic irradiated extracts of Solanum paniculatum, Dahlia pinnata, Lycopersicon esculentum, Nephrolepis pectinata, Ruta graveolens, Ficus elastica, Lavandula angustifolia, Rhododendron simsii, Agave angustifolia, Ocimum basilicum, Allamanda cathartica, Dieffenbachia brasiliensis, Pennisetum purpureum, Annona squamosa, Coffea arabica and Hibiscus rosa-sinensis, in order to identify new substances to integrated pest management (IPM) and to observe possible effects of gamma radiation about extracts and essential oils efficiency such as increase, reduction, activation and inactivation of the same to the pest control. It evaluated the effect of contact on Sitophilus zeamais and by ingestion in Blattella germanica. To irradiation was used an experimental irradiator of Cobalt-60, type Gammacell 220. The essential oils were submitted increasing doses of gamma radiation: 2.5; 5.0; 7.5 and 10.0 kGy. The bioassay with B. germanica demonstrated efficiency between 22.0 e 30.0% and between 30.0 and 42.0%, respectively, to irradiated essential oils of E. citriodora and E. globulus and they demonstrated too repellency to the nymphs. The gamma radiation used promoted changes in essential oils of E. citriodora e E. globulus that they began to show efficiency on B. germanica nymphs besides a significant reduction of repellency. Essential oils of Pinus sp., A. indica, C. sempervirens and J. communis did not display efficiency. The essential oils of C. nardus, and C. citratus had low efficiency. The gamma radiation increased the efficiency of ethanolic extract of D. Pinnata with dose of 7.5 kGy, showing 48.0% of efficiency on B. germanica nymphs. The gamma radiation showed adverse effect on the aqueous extract of R. Graveolens

  16. Evaluation of the potential application of 2-acetylpyridine N4- phenyl thiosemicarbazones derivatives for cancer therapy and diagnosis; Avaliacao da potencial aplicacao de derivados de 2-acetilpiridina N-4 fenil tiossemicarbazonas em terapia e diagnostico oncologico

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Marcella Araugio

    2013-08-01

    Despite the wide range of antineoplastic agents available, resistance of some types of cancer and toxicity to normal cells have been identified as the main causes of treatment failure and death. The lack of early and precise diagnosis is also responsible for reducing survival of cancer patients. In this context, the development of substances with low toxicity and therapeutic potential and/or diagnosis purpose, is the major tool in an attempt to increase the survival of patients and assure the safety and efficacy of treatment. Thiosemicarbazones (TSC) are a class of synthetic compounds that have several biological activities, including antitumor. Although several studies have shown the great potential of TSC as therapeutic and / or diagnostic agents, different chemical modifications performed on this class of molecules indicate new possibilities for applications and still require further studies. The objective of this study was to evaluate the potential applicability of 2-acetylpyridine N-4-phenyl thiosemicarbazones derivatives for cancer therapy and diagnosis. The results showed that all 13 TSC tested were cytotoxic to breast and glioblastoma tumor cell lines, presenting higher in vitro antitumor activity than etoposide, an antineoplastic and inhibitor of topoisomerase II frequently used for cancer therapy. The TSC that have halogen or nitro on ortho position showed higher antitumor activity in vitro than their isomers with halogen or nitro on meta or para position of the phenyl group. H2Ac4oFPh and H2Ac4oClPh compounds showed the highest antitumor activity among all tested compounds, with IC{sub 50} in nanomolar order. These TSC induced cell death by apoptosis and oxidative stress was responsible, at least in part, for this type of cell death. The 5 mg.kg{sup -1} H2Ac4oFPh dose, administered s.c., for 4 consecutive days, did not induce important toxicity; however, the same treatment protocol was not effective for tumor growth reduction in an animal model of brain

  17. Study of crotoxin mechanism of action to mammary carcinomas and evaluation of its potential as a radiopharmaceutical; Estudo do mecanismo de acao da crotoxina em tumores mamarios e avaliacao do seu potenctial radiofarmaceutico

    Energy Technology Data Exchange (ETDEWEB)

    Silveira, Marina Bicalho

    2010-07-01

    Crotoxin, the main component of Crotalus durissus terrificus snake venom, has been studied since 1938. It is a natural polypeptidic complex with pharmacological potential because of its antitumoral properties which has attracted great interest for diagnosis and therapy of oncological diseases. However, Crotoxin mechanism of action and sites of specific interaction on tumor cells are still misunderstood. Breast cancer is the second most frequent type in the world and the most common cancer in women. About 30 to 60% of mammary tumors overexpress epidermal growth factor receptor (EGFR), a transmembrane protein related to cell proliferation. Since literature has reported that Crotoxin antitumoral effect is more potent on cells with EGFR overexpression the objectives of this work were to evaluate Crotoxin cytotoxic effects on mammary tumor cells human breast carcinoma (MCF-7) and Ehrlich tumor cells (murine ascitics carcinoma), and to investigate the specific molecular interaction of Crotoxin on Ehrlich tumor cells. Initially, Crotoxin was radiolabelled with iodine-125 ({sup 125}I-Crotoxin) and iodine-131 ({sup 131}I-Crotoxin). Saturation and competition assay were carried out to characterize Crotoxin in vitro interaction; Crotoxin biodistribution studies and singlephoton emission computed tomography (SPECT) of mice bearing Ehrlich tumor have been evaluated to describe in vivo interaction. Our results showed that Crotoxin presented cytotoxic effect against Ehrlich with DL{sub 50} in vitro (concentration of compound which is lethal for 50% of cells) of about one micromolar, but did not present significant effect against MCF-7. Morphological alterations characteristic of apoptosis suggests programmed cell death. {sup 125}I-Crotoxin interaction with Ehrlich tumor cells was saturable with approximately 70% specificity, and presented K{sub d}=24.98 nmol/L and B{sub max}=16,570 sites/cell for low affinity binding sites and K{sub d}=0.06 nmol/L and B{sub max}=210 sites

  18. Evaluation of natural radioactivity in some granitic rocks in the state of Parana, Brazil and its use in civil construction; Avaliacao da radioatividade natural em algumas rochas graniticas do estado do Parana e sua utilizacao na construcao civil

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Ademar de Oliveira

    2013-07-01

    Primordial, or terrestrial natural radionuclides, are found in different amounts in the environment. In dwellings, an important dose increment is due to building materials, which contribute for both the external gamma dose from the radionuclides of the {sup 238}U, {sup 235}U and {sup 232}Th series and the natural {sup 40}K and the internal dose, due mainly to {sup 222}Rn inhalation. Once granitic rocks are widely used both as construction materials or structural flooring, those rocks can become an important dose source, depending on the content of concentrations of radioactivity, and the construction application. In this work, a database for granitic rocks of the crystalline shield of Parana (mainly in the Metropolitan Region of Curitiba, RMC), used in civil construction, was generated, evaluating in terms of radiological protection the external and internal dose increments, caused by the use of these materials. Also, possible correlations between the {sup 226}Ra activity concentration, the {sup 222}Rn exhalation rate, density, porosity and chemical composition (oxide content) in these samples had been studied. The external dose was assessed by gamma-ray spectrometry with High-Purity Germanium detectors, where the activity concentration of the radionuclides {sup 232}Th, {sup 226}Ra and {sup 40}K are the parameters used in dosimetric models (Dosimetric Indexes), which established limits in accordance with the form, amount and application of material of construction. For the calculation of the annual effective external dose it was assumed a room model with dimensions of 4 m x 5 m x 2:8 m and all walls internally covered with 2 cm thickness of granite and an annual exposure time of 7000 h as suggested by the European Commission of Radiological Protection for internal superficial coating materials. The internal exposure was assessed from the radon concentration in the air of the room model, simulated from the superficial exhalation rate of {sup 222}Rn. The exhalation

  19. Niobium (V) doped bioceramics: evaluation of the hydrothermal route modified with citric acid and urea to obtain modified hydroxyapatite; Bioceramicas aditivadas com niobio (V): avaliacao da rota hidrotermica modificada com acido citrico e ureia para obtencao de hidroxiapatitas modificadas

    Energy Technology Data Exchange (ETDEWEB)

    Simomukay, E.; Souza, E.C.F. de; Antunes, S.R.M.; Borges, C.P.F.; Michel, M.D.; Antunes, A.C. [Universidade Estadual de Ponta Grossa (UEPG), Ponta Grossa, PR (Brazil)

    2016-01-15

    Synthetic hydroxyapatite (Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2}; HA) has become a widely used ceramic material for bone reconstruction due to its biocompatibility with the bone tissue. This biocompatibility as well as other physical and chemical properties of the hydroxyapatite can be modified by the addition of different ions to its structure. Niobium (V) ion has not been commonly used in the hydroxyapatite synthesis. The objective of this study was to evaluate the use of hydrothermal route in the niobium (V) doped hydroxyapatite synthesis. The route used the niobium ammonium oxalate (NH{sub 4}H{sub 2}[NbO(C{sub 2}O{sub 4}){sub 3}].3H{sub 2}O) complex as a niobium (V) ion precursor. The addition of citric acid and urea in the hydrothermal route is used for the control of synthesis pH and precipitation rate. Pure sample and sample added with 5.3 ppm of niobium (V) ion were prepared. The coexistence of other phases besides the hydroxyapatite was not observed in any of the samples through the use of X-ray diffraction and infrared spectroscopy (FTIR) techniques. The FTIR technique revealed the presence of hydroxyapatite characteristic functional groups. The scanning electron microscopy analysis showed the formation of agglomerates composed of round particles, confirmed by the transmission electron microscopy technique. The X-ray fluorescence spectroscopic analysis detected the presence of niobium in the doped sample. The results showed that niobium (V) doped hydroxyapatite can be synthesized by means of hydrothermal route, which may be considered as huge potential for future application in bioceramics. (author)

  20. Preliminary analysis of doses to evaluate the image quality in radiographic examinations in veterinary radiology;Analise preliminar das doses para avaliacao da qualidade da imagem em exames radiograficos na radiologia veterinaria

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Ana Carolina B.C.F.; Dias, Mayara T.P.; Santos, Andrea C. [Universidade de Sao Paulo (USP), SP (Brazil). Faculdade de Medicina Veterinaria e Zootecnia; Melo, Camila S.; Furquim, Tania A.C. [Universidade de Sao Paulo (IEE/USP), SP (Brazil). Inst. de Eletrotecnica e Energia

    2009-07-01

    This work has as objective to promote the analysis of the radiological doses and quality of the image of the technical letter used for the accomplishment of thorax and coxal radiographic examination of animals of canine and feline species. The study was accomplished in the service of Diagnosis for Image in Veterinarian Hospital of Veterinary Medicine and Zootecnia College of University of Sao Paulo, in two conventional equipment. Initially, physical features of the animals and the technique used were collected for each one of the 188 radiographic examinations of thorax and 52 examinations of coxal. The animals were placed in different groups, according to their body weight. For each group, the averages for each feature were calculated: thickness of the radiographed region, tension, electric current, time of exhibition, current product electric-time, size of the used film, presence or absence of bucky and feature of focus (narrow or thick). On the basis of the averages of group M (of lesser weights that 5kg for cats and between 10,1kg and 20kg for dogs), was executed a physical analysis of the current technical letter, using the equipment: ionization chamber (to determinate the value of kerma in air), simulator objects (representative of the thickness of the animal) and three dispositive standards of test that evaluate space resolution, resolution in low contrast and contrast-detail. The obtained images were analyzed and compared for a physicist and a radiologist medical veterinary. The results had shown that the examinations supply dose considered high for techniques used mainly for coxal. The equipment A, although to supply higher doses, presents the better images for the majority of the projections. However, the study indicates that there are not exactly reference levels, but these examinations must pass for improvement of quality of image (author)

  1. Evaluation of the ionizing radiation effects in microbiology, physical and chemical and sensory aspects of ice cream; Avaliacao dos efeitos da radiacao ionizante nos aspectos microbiologicos, fisico-quimicos e sensoriais de sorvetes

    Energy Technology Data Exchange (ETDEWEB)

    Rogovschi, Vladimir Dias

    2015-06-01

    The ice cream is defined as an emulsion of fats and proteins or a mixture of water and sugar, other ingredients may be added provided since they do not affect the product. It is considered a food of high nutritional value, providing lipids, carbohydrates, protein, calcium, phosphorus, and other minerals and vitamins (A, B1, B2, B6, C, D, E and K), and it is considered one of the most important products and higher interest to the dairy industry due to great demand by the consumers. The diseases related to food consumption are considered one of the most significant problems. Several outbreaks related to microbiological contamination of ice cream have been reported in recent decades in Asia, Europe and America. It is believed that the ice cream, as a frozen food, presents no risk to the population health. However, it is considered an excellent environment for the growth of microorganisms due to its composition, pH close to neutrality and long storage period. The aim of this study was to evaluate the microbiological, sensory and physicochemical aspects of ice cream. The ice cream samples were irradiated with gamma rays (60Co) with the doses of LOkGy, 2.0kGy, 3.0kGy and 4.0kGy. The samples intended for the inoculation of Staphylococcus aureus (ATCC 6538), Escherichia coli (ATCC 11229) and Salmonella abaetetuba (ATCC 35640) have been irradiated with doses of 1.0, 2.0 and 3.0kGy. It can be concluded that the dose of 3.0kGy was adequate to reduce most of the studied microorganisms to undetected levels. The use of gamma radiation affected the texture and the parameters of the colorimetric analyses of the ice cream. The results of the sensorial analyses showed that the better accepted dose was 3.0kGy. (author)

  2. Development of a control system for evaluation of renewable power plants in the water pumping; Desenvolvimento de um sistema de controle para avaliacao de fontes de energias renovaveis no bombeamento de agua

    Energy Technology Data Exchange (ETDEWEB)

    Presenco, Jose Fernando [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Pos-graduacao em Agronomia; Seraphim, Odivaldo Jose [Universidade Estadual Paulista (FCA/UNESP), Botucatu, SP (Brazil). Fac. de Ciencias Agronomicas. Dept. de Engenharia Rural

    2010-07-01

    The use of alternative energy systems in the current days is an urgent necessity due to the problems that the planet is facing as the heating and loss of ozone layer. The scarcity of conventional energy is another problem that must be solved for the future of humanity. It must be considered that the people are inhabiting places moved away not always with available energy. The application of technologies as automation and control can help us to solve this problem. Therefore, this work aimed at apply an equipment of industrial usage, the Programmable Logical Controller, PLC, in alternative energies systems, as eolic generation and photovoltaic generation used for water pumping, aiming the automatic control and the efficiency in the places where it has simultaneous availability of these sources, based in criterion of priority that previously established itself between them. It was made a hydraulic and energetic evaluation of the energy system, eolic and photovoltaic, used in the automatic control system of pumping, in the place of accomplishment of the experiment, according to previously established physical conditions. The results have shown that the control system using the PLC is practicable and has trustworthiness. The program developed can be adapted for the use with several power plants in a specific application place. The photovoltaic system of pumping, using a polycrystalline of 70 Watts connected to a pump Shurflo 8000, showed to be efficient with significant flows in almost all the months. The eolic system of pumping, using an eolic generator of 400 Watts assembled in place of experiment, did not demonstrate energetic capacity for use in this specific type of application. (author)

  3. Evaluation of the response of thermoluminescent detectors in clinical beams dosimetry using different phantoms; Avaliacao da resposta de detectores termoluminescentes na dosimetria de feixes clinicos utilizando diferentes objetos simuladores

    Energy Technology Data Exchange (ETDEWEB)

    Matsushima, Luciana Cardoso

    2010-07-01

    Radiotherapy is one of the three principal treatment modalities used in the treatment of malignant diseases such as cancer, the other two are chemotherapy and radiosurgery. In contrast to other medical specialties that rely mainly on the clinical knowledge and experience of medical specialists, radiotherapy, with its use of ionizing radiation in treatment of cancer, relies heavily on modern technology and the collaborative efforts of several professionals whose coordinated team approach greatly influences the outcome of the treatment. In the area of clinical dosimetry, an efficient and accurate calibration of the radiation beam ensures knowledge of the radiation dose delivered to the patient, allowing thus the success of radiotherapy. This study aims to compare the thermoluminescent response of calcium sulfate doped with dysprosium (CaSO{sub 4}:Dy) dosimeters produced by IPEN (6 mm in diameter and 0,8 mm tick) with the response of lithium fluoride (3,15 x 3,15 x 0,9 mm{sup 3}) doped with magnesium and titanium (LiF:Mg,Ti) in dosimetry of clinical photons (6 and 15 MV) and electrons beams (6 and 9 MeV) using solid water (RMI-457), water and PMMA phantoms. Initially, the dose-response curves were obtained for irradiation in cobalt-60 gamma radiation source in air (PMMA plates) and under electronic equilibrium conditions and for clinical electrons and photons beams at depth of maximum dose. The sensitivities of the thermoluminescent dosimeters were also evaluated and the values of their reproducibilities and intrinsic efficiency were determined for the response to different types of phantoms and radiation energy. The obtained results indicate that the main advantage of CaSO{sub 4}:Dy dosimeters is the enhanced sensitivity to radiation doses measured for {sup 60}Co, photons and electrons beams, thus representing a viable alternative for application in dosimetry in the radiotherapy area. (author)

  4. Evaluation of {sup 222}Rn concentration of the internal and external environments of residences at Monte Alegre municipality, Para, Brazil; Avaliacao da concentracao do {sup 222}Rn nos ambientes internos e externos de residencias do municipio de Monte Alegre, PA

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Vicente de Paula

    1999-07-01

    The human being is constantly exposed to the natural radioactivity in the environment where he lives. This radioactivity comes mainly from materials present in the terrestrial crust that possess in their constitution chemical elements belonging to the radioactive families of uranium and thorium. The use of such materials for the construction of houses constitutes an important exposure form to the natural radiation, above all to the radioactive gas {sup 222}Rn, that it is exhaled from them. The Brazilian soil is composed, among other, of minerals that contain appreciable concentrations of these elements. The inhabitants of Monte Alegre town in Para, located at 2 deg 00' 24,9 'S ; 54 deg 04 ' 13,5 {sup W}, used in the construction of their houses stones obtained from an area 20 km distant of Monte Alegre, denominated Ingles de Souza, located at 01 deg 56' 4 0,1 S; 54 deg 12 149,7 W, where a small residential village, denominated National Agricultural Colony of Para (CANP), is located. The objective of this work was to evaluate the indoor concentration of {sup 222}Rn in the residences of Monte Alegre and CANP. Determinations of the {sup 238}U and {sup 226}Ra concentrations, measurements of the radon flux in samples of stones and soils of the two regions, as well as measurements to the gamma dose close of the soil and inside the residences, were also carried out. The average results of the radon concentration in the air of the investigated residences did not exceed the limits of 200 Bq. m{sup 3} (action level) and 600 Bq. m{sup 3} (intervention level) recommended by the International Commission on Radiological Protection (ICRP). The concentrations of natural radionuclides and the radon flux determined at the village showed values 17 times higher than those found at the urban area of Monte Alegre, while the average indoor gamma dose rate in the village residences was 0.86 mSv/a. (author)

  5. Sustainability evaluation of nanotechnology processing and production

    OpenAIRE

    Teresa M. Mata; Nídia de Sá Caetano; António A. Martins

    2015-01-01

    This article discusses the current situation and challenges posed by nanotechnology from a sustainability point of view. It presents an objective methodology to evaluate the sustainability of nanotechnology products, based on a life cycle thinking approach, a framework particularly suited to assess all current and future relevant economic, societal and environmental impacts products and processes. It is grounded on a hierarchical definition of indicators, starting from 3D indicators that take...

  6. Deep learning evaluation using deep linguistic processing

    OpenAIRE

    Kuhnle, Alexander; Copestake, Ann

    2017-01-01

    We discuss problems with the standard approaches to evaluation for tasks like visual question answering, and argue that artificial data can be used to address these as a complement to current practice. We demonstrate that with the help of existing 'deep' linguistic processing technology we are able to create challenging abstract datasets, which enable us to investigate the language understanding abilities of multimodal deep learning models in detail, as compared to a single performance value ...

  7. Effects of gamma radiation of Cobalt-60 on arabica and conillon seeds coffea: physic-chemistry evaluation; Efeitos da radiacao gama do Cobalto-60 em sementes de cafe arabica e conillon: avaliacao fisico-quimica

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Marcus Henriques da

    2012-07-01

    Brazil is the largest producer and exporter of coffee in the world. The coffee bean is one of the main products of the Brazilian trade balance. Two species of coffee are the most economically important: the Coffea arabica L. and Coffea canephora Pierre is the largest representative of the Coffea canephora Pierre is the coffea conillon. Food irradiation is an area of research that aims to increase the shelf life of foods and controlling pests. This study aimed to verify the physicochemical variables of Arabica coffee and conillon were affected when exposed to doses of gamma radiation from cobalt-60. The samples were provided by Polo in Coffee Quality Technology, Federal University of Lavras - UFLA. The coffee samples were subjected to irradiation doses: 0 (control), 5 kGy and 10 kGy, a multipurpose irradiator of IPEN - Research Institute of Nuclear Energy and the University of São Paulo, at a rate of 7.5 kGy / hour. For irradiation the samples were vacuum-packed in appropriate packaging aluminised. After the process of irradiation the samples were stored at a temperature of 15 ± 1 deg C and relative humidity of 17 ± 1%. The following analyzes were performed: levels of total sugars, glucose, sucrose, caffeine, humidity, pH, total acidity, electrical conductivity and fibers. Analyses were performed 1, 30, 60 and 90 days after irradiation, and the results were submitted to analysis of variance and means were compared by Tukey test at 5%. It was observed that the analysis results of the samples irradiated with 5 kGy and 10 kGy showed values similar to the control. It was concluded that irradiation did not induce deleterious effects on arabica coffee seeds and conillon irradiated with 5 kGy and 10 kGy to 90 days after irradiation. (author)

  8. Thermal processes evaluation for RWMC wastes

    International Nuclear Information System (INIS)

    1991-01-01

    The objective of this activity was to provide a white paper that identifies, collects information, and presents a preliminary evaluation of ''core'' thermal technologies that could be applied to RWMC stored and buried mixed waste. This paper presents the results of the following activities: General thermal technology identification, collection of technical and cost information on each technology, identification of thermal technologies applicable to RWMC waste, evaluation of each technology as applied to RWMC waste in seven process attributes, scoring each technology on a one to five scale (five highest) in each process attribute. Reaching conclusions about the superiority of one technology over others is not advised based on this preliminary study alone. However, the highly rated technologies (i.e., overall score of 2.9 or better) are worthy of a more detailed evaluation. The next step should be a more detailed evaluation of the technologies that includes onsite visits with operational facilities, preconceptual treatment facility design analysis, and visits with developers for emerging technologies. 2 figs., 6 tabs

  9. Evaluation of standard and use tendency of image diagnosis exams in Brazil with emphasis in pediatric computerized tomography; Avaliacao do padrao e tendencia de uso de exames de diagnostico por imagem no Brasil com enfase em tomografia computadorizada pediatrica

    Energy Technology Data Exchange (ETDEWEB)

    Dovales, Ana Cristina Murta

    2016-07-01

    There is little information on developing countries about the use of diagnostic imaging procedures and the doses associated with radiological examinations. This study assessed the pattern and trend of diagnostic imaging usage in outpatients of the Brazilian Unified Health System (SUS) by modality and examined body part. Emphasis was given to computed tomography (CT) scans for which the analysis was extended to the private health care sector and included the evaluation of age at examination distribution, and dose estimation for children and young adults. Information on the use of diagnostic imaging procedures among SUS outpatients was obtained from the Outpatient Information System (SIA) of the Department of Information Technology of SUS (DATASUS). Data on the use of CT in the private health care sector were extracted from the Radiological Information Systems (RIS) of 25 private radiology services in 8 Brazilian cities. Effective doses and absorbed doses on organs of interest were estimated individually for 4,497 patients younger than 20 years of age using CT scan technical parameters and Monte Carlo simulations of radiation transport. Between 2002 and 2012 it was observed that conventional radiology was the most frequent modality of diagnostic imaging in SUS outpatients, but more sophisticated modalities, such as CT and magnetic resonance imaging, had the highest growth rates over the study period. The most frequent CT scan in SUS outpatients between 2001 and 2011 was the head/neck exam, but abdomen/pelvis examinations were the ones that grew the most. Patients up to 20 years of age made approximately 13% and 9% of the CT examinations between 2008 and 2014 in the public and private health care systems, respectively. About one-third of the private-sector patients had more than one CT scan in this period. There was great variation in doses, even for the same type of procedure in patients of the same age group. The highest mean effective dose was 13.5 mSv estimated

  10. Performance evaluation of small scale internal combustion engine with mixtures for diesel oil-palm oil; Avaliacao do desempenho do motor de combustao interna de pequeno porte com misturas oleo diesel - oleo de dende

    Energy Technology Data Exchange (ETDEWEB)

    Seye, Omar; Souza, Rubem Cesar Rodrigues [Universidade Federal do Amazonas (CDEAM/UFAM), Manaus, AM (Brazil). Centro de Desenvolvimento Energetico Amazonico], Emails: Seye62omar@yahoo.com, rcsouza@internext.com.br

    2006-07-01

    This work aims at the performance evaluation of the Cummins 4B -3.9, an internal combustion engine of maximum power 75 hp (56.6 kW) for small scale power generation, burning different mixtures of diesel fuel and palm oil. The palm oil in nature is mixed manually, what unfortunately will influence the engine performance as it hinders the combustion. The test protocol will include the biodiesel, later on. The emissions were assessed for several proportions of mixture diesel/palm oil covering the strip from 0 to 20% and the results were compared to the engine performance when it operates with diesel only. The motor is coupled to a dynamometer, whose operation consists of the acceleration and deceleration of water in order to simulate the effect of a load being applied to the motor. The system is controlled by the software LT commander that allows the start up and the shutdown of the engine from the screen of the computer that also monitors the following parameters as speed of rotation of the motor (RPM), applied torque (N-m), potency (hp), temperature of the lubricating oil, temperature of the water in the entrance and exit of the motor, and temperature of the environment (deg C), pressures of the lubricating oil and of opening of the injector (mBar). While a flow meter coupled to the piping measures the consumption of fuel, the gas analyzer ECHO Line 6000 it monitors the concentration and temperature of carbon monoxide (CO) (ppm), nitric oxide (NO) (ppm), nitrogen dioxide (NO{sub 2}), (ppm), sulfur dioxide (SO{sub 2}) (ppm) and Oxygen (O{sub 2}) (%) in the exhaust gases. This equipment also determines the combustion parameters as excess of air and the efficiency. The technical results present the efficiency variation, the pressure of the fuel, monoxide carbon, NOx emissions, Oxygen content in the exhaust gases, for the different mixture proportions. Furthermore, the results of economic viability show generation cost values of US$ 135,66/MWh for the motor operating

  11. Evaluation of the {sup 14}C-prochloraz residue levels in irradiated mangoes (Mangifera indica) and apples (Malus domestica).; Avaliacao dos niveis de residuos de {sup 14}C-prochloraz em mangas (Mangigera indica) irradiadas e em macas (Malus domestica)

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Maria Aparecida

    1998-07-01

    The Brazilian crops mangoes and apples has expanding in the last years. However, tropical fruits crops are susceptible to infection that harms the crop yield. The control of these diseases is made through fungicides such as prochloraz which possesses protecting eradicating action by controlling anthracnose in mangoes and scabies in apples. Agrochemicals are of great importance in the agriculture considering the of relationship cost/benefit. However they may cause a series of problems in the ecosystem, being the levels of agrochemicals residues in fruits one of these factors. The aim of this work was to evaluate the prochloraz levels in mangoes treated in both stages of pre and post harvest, and in apples treated in the pre harvest. In the treatment of the mangoes, the interaction, fungicide with the gamma radiation with dose of 1,0 kGy, was used to induce prochloraz degradation. Treated post harvest mangoes were stored, at 12 deg C during 21 days. The results showed that the prochloraz did not present reduction in the residual levels of the mangoes after 21 day storage, that is the safe period established by the Brazilian legislation on agrochemicals, in treated mangoes. The refrigerated storage (12 deg C) and the gamma radiation also did not contribute to the degradation of the fungicide in mangoes. In average the concentration of the fungicide prochloraz in the peels (bar X = 1,64 mug/g) was higher than in the mangoes pulp (bar x = 0,06 mug/g), which allows the consumption of this fruit, since the peel is always discarded. The degradation product, formed in peels of mangoes in fruits treated in the pre and post harvest was the metabolite BIS 44596; for mangoes treated in the pre-post harvest the metabolite formed was the BIS 445186. Both metabolites were found in very low levels, confirming that occurs degradation of the fungicide in mangoes. In apples treated with the prochloraz, reduction of 500/0 in the levels. (author)

  12. Evaluation of {sup 222}Rn concentration of the internal and external environments of residences at Monte Alegre municipality, Para, Brazil; Avaliacao da concentracao do {sup 222}Rn nos ambientes internos e externos de residencias do municipio de Monte Alegre, PA

    Energy Technology Data Exchange (ETDEWEB)

    Melo, Vicente de Paula

    1999-07-01

    The human being is constantly exposed to the natural radioactivity in the environment where he lives. This radioactivity comes mainly from materials present in the terrestrial crust that possess in their constitution chemical elements belonging to the radioactive families of uranium and thorium. The use of such materials for the construction of houses constitutes an important exposure form to the natural radiation, above all to the radioactive gas {sup 222}Rn, that it is exhaled from them. The Brazilian soil is composed, among other, of minerals that contain appreciable concentrations of these elements. The inhabitants of Monte Alegre town in Para, located at 2 deg 00' 24,9 'S ; 54 deg 04 ' 13,5 {sup W}, used in the construction of their houses stones obtained from an area 20 km distant of Monte Alegre, denominated Ingles de Souza, located at 01 deg 56' 4 0,1 S; 54 deg 12 149,7 W, where a small residential village, denominated National Agricultural Colony of Para (CANP), is located. The objective of this work was to evaluate the indoor concentration of {sup 222}Rn in the residences of Monte Alegre and CANP. Determinations of the {sup 238}U and {sup 226}Ra concentrations, measurements of the radon flux in samples of stones and soils of the two regions, as well as measurements to the gamma dose close of the soil and inside the residences, were also carried out. The average results of the radon concentration in the air of the investigated residences did not exceed the limits of 200 Bq. m{sup 3} (action level) and 600 Bq. m{sup 3} (intervention level) recommended by the International Commission on Radiological Protection (ICRP). The concentrations of natural radionuclides and the radon flux determined at the village showed values 17 times higher than those found at the urban area of Monte Alegre, while the average indoor gamma dose rate in the village residences was 0.86 mSv/a. (author)

  13. Radiation exposure evaluation of the professional working interventionist procedures in a hemodynamics service; Avaliacao da exposicao a radiacao dos profissionais que executam procedimentos intervencionistas em um servico de hemodinamica

    Energy Technology Data Exchange (ETDEWEB)

    Da Silva, Leonardo Peres

    2004-07-01

    An evaluation of the dose distribution received by all the workers involved on coronary angioplasty, arteriography, coronary angiography and mitral valvuloplasty procedures has been made in this work. For the measurements, LiF:Mg, Ti TLD(TLD 100) was used, located in seven different points on the worker's body: hands, knees, neck, forehead and thorax, inside and outside lead apron.) The measurements have been done for each hemo dynamical procedure, and the TLD calibrated in personal dose equivalent (H{sub p}(d)) operational quantity for 0,07 mm, 3 mm and 10 mm depth. Nurses and auxiliary doctors did not receive expressive dose values, indicating that the adopted radioprotection procedures seem to be appropriate and sufficient for them. However, the same is not true for the doctors direct in charge of the procedure. The results show the importance of the use of thyroid protections in these cases. This work discusses the main factors that cause occupational dose increase. From all interventionist hemo dynamical procedures analyzed, the dose values received by the doctors on coronary angioplasty procedures and coronary angiography were higher than the ones found on arteriography and mitral valvuloplasty. The higher dose values has been found for coronary angiography procedures in X-ray tools, that work with fluoroscopy on continuous mode and have been executed with brachial way, even in the eyes, hands, knees and thyroid, with or without shield. Multiplying these high dose values, measured in one procedure by the mean number of annual procedures made at the studied hospital by each doctor, the individual dose annual limits can be surpassed. Based on these estimations, some optimizations suggestions have been made and one discussion about the need of additional monitoring points is presented. Different algorithms have been used in order to estimate the effective dose, including a new proposal. The obtained results using the actual Radiodiagnostic Brazilian

  14. Radiation exposure evaluation of the professional working interventionist procedures in a hemodynamics service; Avaliacao da exposicao a radiacao dos profissionais que executam procedimentos intervencionistas em um servico de hemodinamica

    Energy Technology Data Exchange (ETDEWEB)

    Da Silva, Leonardo Peres

    2004-07-01

    An evaluation of the dose distribution received by all the workers involved on coronary angioplasty, arteriography, coronary angiography and mitral valvuloplasty procedures has been made in this work. For the measurements, LiF:Mg, Ti TLD(TLD 100) was used, located in seven different points on the worker's body: hands, knees, neck, forehead and thorax, inside and outside lead apron.) The measurements have been done for each hemo dynamical procedure, and the TLD calibrated in personal dose equivalent (H{sub p}(d)) operational quantity for 0,07 mm, 3 mm and 10 mm depth. Nurses and auxiliary doctors did not receive expressive dose values, indicating that the adopted radioprotection procedures seem to be appropriate and sufficient for them. However, the same is not true for the doctors direct in charge of the procedure. The results show the importance of the use of thyroid protections in these cases. This work discusses the main factors that cause occupational dose increase. From all interventionist hemo dynamical procedures analyzed, the dose values received by the doctors on coronary angioplasty procedures and coronary angiography were higher than the ones found on arteriography and mitral valvuloplasty. The higher dose values has been found for coronary angiography procedures in X-ray tools, that work with fluoroscopy on continuous mode and have been executed with brachial way, even in the eyes, hands, knees and thyroid, with or without shield. Multiplying these high dose values, measured in one procedure by the mean number of annual procedures made at the studied hospital by each doctor, the individual dose annual limits can be surpassed. Based on these estimations, some optimizations suggestions have been made and one discussion about the need of additional monitoring points is presented. Different algorithms have been used in order to estimate the effective dose, including a new proposal. The obtained results using the actual Radiodiagnostic Brazilian regulation

  15. Inorganic composition determination and evaluation of the biological activity of Peperomia pellucida in the Aspergillus flavus growth; Estudo da composicao inorganica e avaliacao da atividade biologica de Peperomia pellucida no crescimento de Aspergillus flavus

    Energy Technology Data Exchange (ETDEWEB)

    Sussa, Fabio Vitorio

    2011-07-01

    In recent decades, there has been a great advancement in research in developing drugs from plants. Nevertheless, little significant care exists in the literature about the stable concentration of elements, as well as the activity concentration of '2{sup 38}U and {sup 232}Th decay products in plants used for this purpose in Brazil. The presence of stable elements and radionuclides in plants constitutes the pathway for their migration to humans, via uptake of tea or remedies made with medicinal herbs. Peperomia pellucida, whose popular name is 'erva de jabuti', is a plant known by its medicinal usages, such as healing and analgesic properties plus antibacterial and antifungal activities against food fungi. In this study, the elemental composition of Peperomia pellucida and surrounding soil samples collected in the Botanical Garden in Rio de Janeiro was determined; the elemental concentration in the alcoholic extract and infusion processes of dry plants was also determined. The elemental concentration of As, Ba, Br, Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Lu, Na, Nd, Rb, Sb, Sc, Sm, Ta, Tb, Th, U, Yb and Zn was determined in the leaves, aerial parts, including leaves, stems and roots of Peperomia pellucida, in their extracts obtained by maceration and infusions and in the surrounding soil by the Instrumental Neutron Activation Analysis (INAA). The analytical methodology used to determine the elements Cd, Hg and Pb was the Atomic Absorption Spectrometry (AAS); the activities of {sup 226}Ra, {sup 228}Ra and {sup 210}Pb were carried out by gross alpha and beta counting, after radiochemical separation. The quality of the obtained results was assured by the analyses of the certified reference materials IAEA-336 Lichen, IAEA-Soil-7, IAEA-326 Radionuclides in soil, NIST 1515 Apple Leaves and NIST 1542 Peach Leaves. The relative standard deviations and the relative errors obtained in these analyses indicated good precision and accuracy of the results. The essential

  16. Processing multilevel secure test and evaluation information

    Science.gov (United States)

    Hurlburt, George; Hildreth, Bradley; Acevedo, Teresa

    1994-07-01

    The Test and Evaluation Community Network (TECNET) is building a Multilevel Secure (MLS) system. This system features simultaneous access to classified and unclassified information and easy access through widely available communications channels. It provides the necessary separation of classification levels, assured through the use of trusted system design techniques, security assessments and evaluations. This system enables cleared T&E users to view and manipulate classified and unclassified information resources either using a single terminal interface or multiple windows in a graphical user interface. TECNET is in direct partnership with the National Security Agency (NSA) to develop and field the MLS TECNET capability in the near term. The centerpiece of this partnership is a state-of-the-art Concurrent Systems Security Engineering (CSSE) process. In developing the MLS TECNET capability, TECNET and NSA are providing members, with various expertise and diverse backgrounds, to participate in the CSSE process. The CSSE process is founded on the concepts of both Systems Engineering and Concurrent Engineering. Systems Engineering is an interdisciplinary approach to evolve and verify an integrated and life cycle balanced set of system product and process solutions that satisfy customer needs (ASD/ENS-MIL STD 499B 1992). Concurrent Engineering is design and development using the simultaneous, applied talents of a diverse group of people with the appropriate skills. Harnessing diverse talents to support CSSE requires active participation by team members in an environment that both respects and encourages diversity.

  17. Evaluating Process Effectiveness to Reduce Risk

    Science.gov (United States)

    Shepherd, Christena C.

    2017-01-01

    security; loss of confidence in government; failure of publicly funded projects; damage to the environment; ethics violations, and the list goes on; with local, national and even international consequences. The Plan-Do-Check-Act process, also known as the "process approach" can be used at any time to establish and standardize a process, and it can also be used to check periodically for "process creep" (i.e., informal, unauthorized changes that have occurred over time), any necessary updates and improvements. While ISO 9001 compliance is not mandated for all government agencies, if interpreted correctly, it can be useful in establishing a framework and implementing effective management systems and processes.4 Another method that can be used to evaluate effectiveness is the scorecard definitions in Mallory's Process Management Standard5 as a basis for evaluating work on the process level on effective, and continuously improved and improving processes. With processes on the lower end of the scale, agencies are vulnerable to a great many risks, with employees and managers making up many of the rules as they go, leading to the above listed negative results. Without clear guidance for nominal operations, off-nominal situations can, and do, increase the likelihood of chaos. In an increasingly technical environment, with inter-agency communication and collaboration becoming the norm, agencies need to come to grips with the fact that processes can become rapidly outdated, and that the technical community should take on an increased role in the maturation of the agency's processes. Industry has long known that effective processes are also efficient, and process improvement methods such as Kaizen, Lean, Six Sigma, 5S, and mistake proofing lead to increased productivity, improved quality, and decreased cost. Again, government agencies have different concerns, but inefficiencies and mistakes can have dire and wide reaching consequences for the public that they serve. While no one goes

  18. Radiologic evaluation of facial injury; Avaliacao radiologica dos traumatismos faciais

    Energy Technology Data Exchange (ETDEWEB)

    Souza, Ricardo Pires de; Volpato, Richard [Complexo Hospitalar Heliopolis, Sao Paulo, SP (Brazil). Servico de Diagnostico por Imagem]. E-mail: richard_volpato@uol.com.br; Nascimento, Lia Paula [Complexo Hospitalar Heliopolis, Sao Paulo, SP (Brazil)

    2003-03-01

    A detailed radiological investigation of the maxillofacial injuries is essential to achieve good treatment results. The images should identify every lesion and guide the treatment, thus improving esthetic and functional results. With the aim of simplifying the diagnostic task, the face may be seen as a five regions structure that may suffer a regional fracture or combined fractures involving the adjacent regions. These regions represent areas of focus for pre surgical planning and are as follows: nasal, orbital, zygomatic, maxillary, and mandibular. In order to understand the injury mechanisms and their consequences it is useful to know the supporting buttresses, which are divided in five sagittal planes, three horizontal planes and two coronal planes. We reviewed the cases of patients with facial trauma treated at Complexo Hospitalar Heliopolis, Sao Paulo, Brazil. A review of the relevant issues concerning radiological investigation of these injuries is presented. This study allowed standardization and ordering of the radiological investigation in patients with facial trauma. (author)

  19. Evaluating Translational Research: A Process Marker Model

    Science.gov (United States)

    Trochim, William; Kane, Cathleen; Graham, Mark J.; Pincus, Harold A.

    2011-01-01

    Abstract Objective: We examine the concept of translational research from the perspective of evaluators charged with assessing translational efforts. One of the major tasks for evaluators involved in translational research is to help assess efforts that aim to reduce the time it takes to move research to practice and health impacts. Another is to assess efforts that are intended to increase the rate and volume of translation. Methods: We offer an alternative to the dominant contemporary tendency to define translational research in terms of a series of discrete “phases.”Results: We contend that this phased approach has been confusing and that it is insufficient as a basis for evaluation. Instead, we argue for the identification of key operational and measurable markers along a generalized process pathway from research to practice. Conclusions: This model provides a foundation for the evaluation of interventions designed to improve translational research and the integration of these findings into a field of translational studies. Clin Trans Sci 2011; Volume 4: 153–162 PMID:21707944

  20. Minimally processed vegetable salads: microbial quality evaluation.

    Science.gov (United States)

    Fröder, Hans; Martins, Cecília Geraldes; De Souza, Katia Leani Oliveira; Landgraf, Mariza; Franco, Bernadette D G M; Destro, Maria Teresa

    2007-05-01

    The increasing demand for fresh fruits and vegetables and for convenience foods is causing an expansion of the market share for minimally processed vegetables. Among the more common pathogenic microorganisms that can be transmitted to humans by these products are Listeria monocytogenes, Escherichia coli O157:H7, and Salmonella. The aim of this study was to evaluate the microbial quality of a selection of minimally processed vegetables. A total of 181 samples of minimally processed leafy salads were collected from retailers in the city of Sao Paulo, Brazil. Counts of total coliforms, fecal coliforms, Enterobacteriaceae, psychrotrophic microorganisms, and Salmonella were conducted for 133 samples. L. monocytogenes was assessed in 181 samples using the BAX System and by plating the enrichment broth onto Palcam and Oxford agars. Suspected Listeria colonies were submitted to classical biochemical tests. Populations of psychrotrophic microorganisms >10(6) CFU/g were found in 51% of the 133 samples, and Enterobacteriaceae populations between 10(5) and 106 CFU/g were found in 42% of the samples. Fecal coliform concentrations higher than 10(2) CFU/g (Brazilian standard) were found in 97 (73%) of the samples, and Salmonella was detected in 4 (3%) of the samples. Two of the Salmonella-positive samples had minimally processed vegetables had poor microbiological quality, and these products could be a vehicle for pathogens such as Salmonella and L. monocytogenes.

  1. Super Efficient Refrigerator Program (SERP) evaluation. Volume 1: Process evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Sandahl, L.J.; Ledbetter, M.R.; Chin, R.I.; Lewis, K.S.; Norling, J.M.

    1996-01-01

    The Pacific Northwest National Laboratory (PNNL) conducted this study for the US Department of Energy (DOE) as part of the Super Efficient Refrigerator Program (SERP) Evaluation. This report documents the SERP formation and implementation process, and identifies preliminary program administration and implementation issues. The findings are based primarily on interviews with those familiar with the program, such as utilities, appliance manufacturers, and SERP administrators. These interviews occurred primarily between March and April 1995, when SERP was in the early stages of program implementation. A forthcoming report will estimate the preliminary impacts of SERP within the industry and marketplace. Both studies were funded by DOE at the request of SERP Inc., which sought a third-party evaluation of its program.

  2. The evaluation process of short training sessions in organizations

    NARCIS (Netherlands)

    Overschie, M.G.F.; Lukosch, H.K.; De Vries, P.

    This paper presents a critical reflection of the evaluation of learning processes in organizations. Based on learning and evaluation theories and concepts we discuss qualitative and quantitative evaluation processes, and its relationship to short training sessions to foster sustainable development.

  3. Process improvement : the creation and evaluation of process alternatives

    NARCIS (Netherlands)

    Netjes, M.

    2010-01-01

    Companies continuously strive to improve their processes to increase productivity and delivered quality against lower costs. With Business Process Redesign (BPR) projects such improvement goals can be achieved. BPR involves the restructuring of business processes, stimulated by the application of

  4. Evaluation of Grape Pomace Composting Process

    Directory of Open Access Journals (Sweden)

    Patrik Burg

    2014-01-01

    Full Text Available The paper deals with the problems of composting of grape pomace in strip compost piles. The three variants of compost piles formed from grape pomace and vegetables waste, wood chips and mature in varying proportions were tested. Turning of piles was performed using windrow turner PKS 2.8, in which the achieved performance was monitored. On the performance of windrow turner has a significant influence also cross section or width and height of turning piles and the bulk density of ingredients including their moisture. In evaluating, attention has been paid to assessment of selected parameters (temperature, moisture content of the composting process. From the viewpoint of temperature course, the highest temperature reached at the piles in Var. I (64.1 °C and Var. II (55.3 °C. Moisture of compost piles in the individual variants did not differ significantly and ranged between 25–35%.

  5. Process to identify and evaluate restoration options

    International Nuclear Information System (INIS)

    Strand, J.; Senner, S.; Weiner, A.; Rabinowitch, S.; Brodersen, M.; Rice, K.; Klinge, K.; MacMullin, S.; Yender, R.; Thompson, R.

    1993-01-01

    The restoration planning process has yielded a number of possible alternatives for restoring resources and services injured by the Exxon Valdez oil spill. They were developed by resource managers, scientists, and the public, taking into consideration the results of damage assessment and restoration studies and information from the scientific literature. The alternatives thus far identified include no action natural recovery, management of human uses, manipulation of resources, habitat protection and acquisition, acquisition of equivalent resources, and combinations of the above. Each alternative consists of a different mix of resource- or service-specific restoration options. To decide whether it was appropriate to spend restoration funds on a particular resource or service, first criteria had to be developed that evaluated available evidence for consequential injury and the adequacy and rate of natural recovery. Then, recognizing the range of effective restoration options, a second set of criteria was applied to determine which restoration options were the most beneficial. These criteria included technical feasibility, potential to improve the rate or degree of recovery, the relationship of expected costs to benefits, cost effectiveness, and the potential to restore the ecosystem as a whole. The restoration options considered to be most beneficial will be grouped together in several or more of the above alternatives and presented in a draft restoration plan. They will be further evaluated in a companion draft environmental impact statement

  6. Econometric Methodology of Monopolization Process Evaluation

    Directory of Open Access Journals (Sweden)

    Dmitrijs Skoruks

    2014-06-01

    Full Text Available The research “Econometric Methodology of Monopolization Process Evaluation” gives a perspective description of monopolization process’ nature, occurrence source, development procedure and internal conjuncture specifics, as well as providing an example of modern econometrical method application within a unified framework of market competition analysis for the purpose of conducting a quantitative competition evaluation on an industry level for practical use in both private and public sectors. The main question of the aforementioned research is the definition and quantitative analysis of monopolization effects in modern day globalized markets, while con- structing an empirical model of the econometric analysis, based on the use of in- ternational historical experience of monopoly formations standings, with the goal of introducing a further development scheme for the use of both econometrical and statistical instruments in line with the forecasting and business research need of enterprises and regulatory functions of the public sector. The current research uses a vast variety of monopolization evaluation ratios and their econometrical updates on companies that are involved in the study procedure in order to detect and scallar measure their market monopolizing potential, based on the implemented acquired market positions, turnover shares and competition policies.

  7. Quality evaluation of processed clay soil samples.

    Science.gov (United States)

    Steiner-Asiedu, Matilda; Harrison, Obed Akwaa; Vuvor, Frederick; Tano-Debrah, Kwaku

    2016-01-01

    This study assessed the microbial quality of clay samples sold on two of the major Ghanaian markets. The study was a cross-sectional assessing the evaluation of processed clay and effects it has on the nutrition of the consumers in the political capital town of Ghana. The items for the examination was processed clay soil samples. Staphylococcus spp and fecal coliforms including Klebsiella, Escherichia, and Shigella and Enterobacterspp were isolated from the clay samples. Samples from the Kaneshie market in Accra recorded the highest total viable counts 6.5 Log cfu/g and Staphylococcal count 5.8 Log cfu/g. For fecal coliforms, Madina market samples had the highest count 6.5 Log cfu/g and also recorded the highest levels of yeast and mould. For Koforidua, total viable count was highest in the samples from the Zongo market 6.3 Log cfu/g. Central market samples had the highest count of fecal coliforms 4.6 Log cfu/g and yeasts and moulds 6.5 Log cfu/g. "Small" market recorded the highest staphylococcal count 6.2 Log cfu/g. The water activity of the clay samples were low, and ranged between 0.65±0.01 and 0.66±0.00 for samples collected from Koforidua and Accra respectively. The clay samples were found to contain Klebsiella spp. Escherichia, Enterobacter, Shigella spp. staphylococcus spp., yeast and mould. These have health implications when consumed.

  8. Probabilistic evaluation of process model matching techniques

    NARCIS (Netherlands)

    Kuss, Elena; Leopold, Henrik; van der Aa, Han; Stuckenschmidt, Heiner; Reijers, Hajo A.

    2016-01-01

    Process model matching refers to the automatic identification of corresponding activities between two process models. It represents the basis for many advanced process model analysis techniques such as the identification of similar process parts or process model search. A central problem is how to

  9. SEAM PUCKERING EVALUATION METHOD FOR SEWING PROCESS

    Directory of Open Access Journals (Sweden)

    BRAD Raluca

    2014-07-01

    Full Text Available The paper presents an automated method for the assessment and classification of puckering defects detected during the preproduction control stage of the sewing machine or product inspection. In this respect, we have presented the possible causes and remedies of the wrinkle nonconformities. Subjective factors related to the control environment and operators during the seams evaluation can be reduced using an automated system whose operation is based on image processing. Our implementation involves spectral image analysis using Fourier transform and an unsupervised neural network, the Kohonen Map, employed to classify material specimens, the input images, into five discrete degrees of quality, from grade 5 (best to grade 1 (the worst. The puckering features presented in the learning and test images have been pre-classified using the seam puckering quality standard. The network training stage will consist in presenting five input vectors (derived from the down-sampled arrays, representing the puckering grades. The puckering classification consists in providing an input vector derived from the image supposed to be classified. A scalar product between the input values vectors and the weighted training images is computed. The result will be assigned to one of the five classes of which the input image belongs. Using the Kohonen network the puckering defects were correctly classified in proportion of 71.42%.

  10. Genetic process mining : an experimental evaluation

    NARCIS (Netherlands)

    Alves De Medeiros, A.K.; Weijters, A.J.M.M.; Aalst, van der W.M.P.

    2007-01-01

    One of the aims of process mining is to retrieve a process model from an event log. The discovered models can be used as objective starting points during the deployment of process-aware information systems (Dumas et al., eds., Process-Aware Information Systems: Bridging People and Software Through

  11. Contractor evaluations in the contractor selection process.

    Science.gov (United States)

    2014-04-01

    The current contractor evaluation system in use within the Kentucky Transportation Cabinet is based on the contractor evaluation system developed as part of SPR 212-00 "Quality Based Prequalification of Contractors." This system relies on average per...

  12. Preliminary economic evaluation of the Alkox process

    International Nuclear Information System (INIS)

    Silva, L.J.; Lilga, M.A.; Camaioni, D.M.; Snowden, L.J.

    1991-09-01

    A new chemical process has been invented at Battelle Pacific Northwest Laboratories for converting alkanes to alcohols. This new chemistry has been named the ''Alkox Process.'' Pacific Northwest Laboratory prepared a preliminary economic analysis for converting cyclohexane to cyclohexanol, which may be one of the most attractive applications of the Alkox process. A process flow scheme and a material balance were prepared to support rough equipment sizing and costing. The results from the economic analysis are presented in the non-proprietary section of this report. The process details, including the flow diagram and material balance, are contained in separate section of this report that is proprietary to Battelle. 7 refs., 4 tabs

  13. Evaluation of the separation by pyrochemical processes

    International Nuclear Information System (INIS)

    2004-01-01

    This report takes stock on the studies conducted by the CEA since the years 90 in the domain of the pyrochemical process, applied to the nuclear fuels reprocessing. After a presentation of the transmutation targets and fuels, the document presents the pyrochemical processes concepts and studies. In this part the author details the process developed foreign, the studies realized at the CEA, the fuel reprocessing of the molten salts reactors and the ionic liquids at ambient temperature. (A.L.B.)

  14. Model visualization for evaluation of biocatalytic processes

    DEFF Research Database (Denmark)

    Law, HEM; Lewis, DJ; McRobbie, I

    2008-01-01

    Biocatalysis offers great potential as an additional, and in some cases as an alternative, synthetic tool for organic chemists, especially as a route to introduce chirality. However, the implementation of scalable biocatalytic processes nearly always requires the introduction of process and/or bi......,S-EDDS), a biodegradable chelant, and is characterised by the use of model visualization using `windows of operation"....

  15. ASME Evaluation on Grid Mobile E-Commerce Process

    OpenAIRE

    Dan Chang; Wei Liao

    2012-01-01

    With the development of E-commerce, more scholars have paid attention to research on Mobile E-commerce and mostly focus on the optimization and evaluation of existing process. This paper researches the evaluation of Mobile E-commerce process with a method called ASME. Based on combing and analyzing current mobile business process and utilizing the grid management theory, mobile business process based on grid are constructed. Firstly, the existing process, namely Non-grid Mobile E-commerce, an...

  16. Evaluation of pretreatment processes for supercritical water oxidation

    International Nuclear Information System (INIS)

    Barnes, C.M.

    1994-01-01

    This report evaluates processes to chemically treat US Department of Energy wastes to remove organic halogens, phosphorus, and sulfur. Chemical equilibrium calculations, process simulations, and responses from developers and licensors form the basis for comparisons. Gas-phase catalytic hydrogenation processes, strong base and base catalyzed processes, high pressure hydrolysis, and other emerging or commercial dehalogenation processes (both liquid and mixed phase) were considered. Cost estimates for full-scale processes and demonstration testing are given. Based on the evaluation, testing of a hydrogenation process and a strong base process are recommended

  17. Evaluation of pretreatment processes for supercritical water oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Barnes, C.M.

    1994-01-01

    This report evaluates processes to chemically treat US Department of Energy wastes to remove organic halogens, phosphorus, and sulfur. Chemical equilibrium calculations, process simulations, and responses from developers and licensors form the basis for comparisons. Gas-phase catalytic hydrogenation processes, strong base and base catalyzed processes, high pressure hydrolysis, and other emerging or commercial dehalogenation processes (both liquid and mixed phase) were considered. Cost estimates for full-scale processes and demonstration testing are given. Based on the evaluation, testing of a hydrogenation process and a strong base process are recommended.

  18. Administrator Evaluation--Planning and Process.

    Science.gov (United States)

    Sweeney, Jim

    1981-01-01

    Discusses five tasks basic to effective administrator evaluation: development of district philosophy; identification of activities crucial to school success; determination of operational procedures; utilization of forms and records which reflect district philosophy; and examination of the components of the system during a trial period. (JD)

  19. Evaluating Students' Beliefs in Problem Solving Process: A Case Study

    Science.gov (United States)

    Ozturk, Tugba; Guven, Bulent

    2016-01-01

    Problem solving is not simply a process that ends when an answer is found; it is a scientific process that evolves from understanding the problem to evaluating the solution. This process is affected by several factors. Among these, one of the most substantial is belief. The purpose of this study was to evaluate the beliefs of high school students…

  20. Evaluation of thermostable enzymes for bioethanol processing

    DEFF Research Database (Denmark)

    Skovgaard, Pernille Anastasia

    of fermentable sugars (glucose) as cellulose is tightly linked to hemicellulose and lignin. Lignocellulose is disrupted during pretreatment, but to degrade cellulose to single sugars, lignocellulolytic enzymes such as cellulases and hemicellulases are needed. Lignocellulolytic enzymes are costly...... for the ioethanol production, but the expenses can be reduced by using thermostable enzymes, which are known for their increased stability and inhibitor olerance. However, the advantage of using thermostable enzymes has not been studied thoroughly and more knowledge is needed for development of bioethanol processes....... Enzymes are added to the bioethanol process after pretreatment. For an efficient sugar and ethanol yield, the solids content of biomass is normally increased, which results in highly viscous slurries that are difficult to mix. Therefore, the first enzymatic challenge is to ensure rapid reduction...

  1. Seismic re-evaluation process in Medzamor-2 NPP

    International Nuclear Information System (INIS)

    Zadoyan, P.

    2000-01-01

    Seismic re-evaluation process for Medzamor-2 NPP describes the following topics: program implementation status; re-evaluation program structure; regulatory procedure and review plan; current tasks and practice; and regulatory assessment and research programs

  2. Process evaluation of a worksite social and physical environmental intervention

    NARCIS (Netherlands)

    Coffeng, J.K.; Hendriksen, I.J.M.; Mechelen, W. van; Boot, C.R.L.

    2013-01-01

    OBJECTIVE:: To evaluate the process of implementation of a social and physical environmental intervention and to explore differences regarding this process between both interventions. METHODS:: Context, recruitment, dose delivered, fidelity, reach, dose received, satisfaction, and implementation

  3. Communication processes, public administration and performance evaluation

    Directory of Open Access Journals (Sweden)

    Arta Musaraj

    2011-01-01

    In order to shed further light for our readers, we analyze by emphasizing the significant differences between the civil law and common law system on one side and the legal families that are part of the same legal system, either “Civil” or “Common,” on the other side. The Europeanization of law refers to the communization of the law by EU institutions and to a process that aims at creating a common Europe legal system. In the end, either in medium or long term, the Europeanization is contributing to the so-called non-mandatory or soft harmonization of private law. It is in the best interest of the EU to seek adequate judicial instruments to accommodate the massive numbers of laws deriving from different Civil Law and the Common law systems.

  4. Supplier Evaluation Process by Pairwise Comparisons

    Directory of Open Access Journals (Sweden)

    Arkadiusz Kawa

    2015-01-01

    Full Text Available We propose to assess suppliers by using consistency-driven pairwise comparisons for tangible and intangible criteria. The tangible criteria are simpler to compare (e.g., the price of a service is lower than that of another service with identical characteristics. Intangible criteria are more difficult to assess. The proposed model combines assessments of both types of criteria. The main contribution of this paper is the presentation of an extension framework for the selection of suppliers in a procurement process. The final weights are computed from relative pairwise comparisons. For the needs of the paper, surveys were conducted among Polish managers dealing with cooperation with suppliers in their enterprises. The Polish practice and restricted bidding are discussed, too.

  5. EVALUATION OF PRODUCT DEVELOPMENT PROCESS USING EMVS

    Directory of Open Access Journals (Sweden)

    Iara Tonissi Moroni Cutovoi

    2014-12-01

    Full Text Available This paper evaluates a PDP model application in an auto parts company, leader in its segment. From the application of lean thinking in the supply chain and the EMVS performance analysis methodology for PDP, a check list is created to avoid waste in project management. In this paper, we show that EMVS can be positively impacted through active management of knowledge within a project. This paper suggests that the value-enabling portion of a project manager's role requires aligning knowledge across these three key domains regarding PDP Gates (Phases at company manufacturers of auto parts, Lean Thinking and Value Stream, and methodology for managing projects through performance-term rates and costs. The results show that the methodology has positive aspects, but its implementation takes time and has repercussions throughout the supply chain. Further this research try to explain the types of wastes and view of new products' development is enhanced and associates a manufacturing strategy focus on EMVS performance analysis and lean thinking, PDP and value stream mapping  showing the important of contribution this tools at reduction of waste.

  6. EVALUATION OF ALTERNATIVE STRONIUM AND TRANSURANIC SEPARATION PROCESSES

    Energy Technology Data Exchange (ETDEWEB)

    SMALLEY CS

    2011-04-25

    In order to meet contract requirements on the concentrations of strontium-90 and transuranic isotopes in the immobilized low-activity waste, strontium-90 and transuranics must be removed from the supernate of tanks 241-AN-102 and 241-AN-107. The process currently proposed for this application is an in-tank precipitation process using strontium nitrate and sodium permanganate. Development work on the process has not proceeded since 2005. The purpose of the evaluation is to identify whether any promising alternative processes have been developed since this issue was last examined, evaluate the alternatives and the baseline process, and recommend which process should be carried forward.

  7. Process Evaluation in Corrections-Based Substance Abuse Treatment.

    Science.gov (United States)

    Wolk, James L.; Hartmann, David J.

    1996-01-01

    Argues that process evaluation is needed to validate prison-based substance abuse treatment effectiveness. Five groups--inmates, treatment staff, prison staff, prison administration, and the parole board--should be a part of this process evaluation. Discusses these five groups relative to three stages of development of substance abuse treatment in…

  8. Demand-side management process evaluations - the management perspective

    International Nuclear Information System (INIS)

    Perrault, G.A.; Barrett, L.B.

    1993-01-01

    A demand-side management (DSM) process evaluation is a qualitative, expert assessment of how a utility marketing program is being conducted. It reviews the efficiency and effectiveness in which a utility plans, manages, executes, and monitors the delivery of DSM programs to its marketplace. Process evaluations,which includes load impact, customer satisfaction and cost-effectiveness analysis, are becoming an increasingly significant component. The process evaluation focus is on the program planning and delivery process as opposed to the energy impacts resulting from the specific measures or products of the program. Because of this process-oriented focus, such evaluations can identify important opportunities for improving the cost-effectiveness of a program without significantly changing product lines. The evaluation may identify administrative or delivery process improvements. In addition, the evaluation may identify ways of improving the degree to which the customer is satisfied with the program or the utility. Since process evaluations are usually conducted as part of a utility's mandated DSM measurement and evaluation plan, they tend to focus mainly on the stated needs of the regulator as opposed to company management. This can be a problem. Although the regulatory perspective is important, in an increasingly competitive business environment, utilities must not overlook management's business and operational needs for specific information regarding DSM program planning, control, execution, and evaluation. This paper discusses some of the conflicts that exist between the regulator's and management's needs for DSM program evaluation results and presents some approaches for assuring that both needs are met. It is organized to first discuss the scope of a process evaluation, then the evaluation issues, the management concerns, and finally reporting of results

  9. The Role of Evaluation in the School Improvement Process

    Science.gov (United States)

    Lindahl, Ronald A.; Beach, Robert H.

    2013-01-01

    Although evaluation serves many purposes in education, there is virtually unanimous agreement that evaluation is a critical component of all school improvement processes. Hamilton et al. (2003) asserted that "assessment and evaluation should be built into reform programs from the outset" (p. 26). Kimball, Lander, and Thorn (2010)…

  10. Evaluation and Modification of Processes for Bioethanol Separation and Production

    Directory of Open Access Journals (Sweden)

    Johnner P Sitompul

    2012-04-01

    Full Text Available This paper concerns on process evaluation and modification for bioethanol separation and production by applying pinch technology. Further, the paper is also focused on obtaining a most energy-efficient process among several processes. Three basic process configurations of bioethanol separation and production were selected for this study. The three separations and production systems are Othmer process, Barbet process and a separation process that operates under vacuum condition. Basically, each process is combination of Danish Distilleries process with a separation system yielding 95% (v/v bioethanol. The production capacity of the plant is estimated about 4 x 107 litre of bioethanol 95% (v/v per year. The result of the studies shows that the most energy efficient process among the three processes evaluated is the Othmer process, followed by the Barbet process and the process involving vacuum operation. The evaluation also shows that further energy saving can be carried for Barbet and Othmer process configuration when Tmin = 10oC for heat exchange possible.

  11. Methodology of evaluation of value created in the productive processes

    OpenAIRE

    M.T. Roszak

    2008-01-01

    Purpose: Of this paper was to present the methodology of analysis of the productive processes with applicationof value analysis and multi-criterion-analysis which allow to evaluate the technology and organization of theproductive processes.Design/methodology/approach: Presented in the paper methodology of evaluation of the productive processesis based on analysis of activities in the productive processes and their characteristics with reference to createdvalue in the productive chain.Findings...

  12. Integrating Usability Evaluations into the Software Development Process

    DEFF Research Database (Denmark)

    Lizano, Fulvio

    as relevant and strategic human–computer interaction (HCI) activities in the software development process, there are obstacles that limit the complete, effective and efficient integration of this kind of testing into the software development process. Two main obstacles are the cost of usability evaluations...... and the software developers' resistance to accepting users’ opinions regarding the lack of usability in their software systems. The ‘cost obstacle’ refers to the constraint of conducting usability evaluations in the software process due to the significant amount of resources required by this type of testing. Some......This thesis addresses the integration of usability evaluations into the software development process. The integration here is contextualized in terms of how to include usability evaluation as an activity in the software development lifecycle. Even though usability evaluations are considered...

  13. Evaluation of Control Parameters for the Activated Sludge Process

    Science.gov (United States)

    Stall, T. Ray; Sherrard, Josephy H.

    1978-01-01

    An evaluation of the use of the parameters currently being used to design and operate the activated sludge process is presented. The advantages and disadvantages for the use of each parameter are discussed. (MR)

  14. Landscape, Process and Power: Re-evaluating Traditional Environmental Knowledge

    Directory of Open Access Journals (Sweden)

    Colleen Marie O'Brien

    2010-09-01

    Full Text Available Review of Landscape, Process and Power: Re-evaluating Traditional Environmental Knowledge. Serena Heckler, ed. 2009. Berghahn Books, New York. Pp. 304, 21 illustrations, bibliography, index. $95.00 (hardback. ISBN 978-1-84545-549-1

  15. Process Evaluation of a Workers' Health Surveillance Program for Meat Processing Workers

    NARCIS (Netherlands)

    van Holland, Berry J; Brouwer, Sandra; de Boer, Michiel R; Reneman, Michiel F; Soer, Remko

    2017-01-01

    Objective To evaluate the implementation process of a workers' health surveillance (WHS) program in a Dutch meat processing company. Methods Workers from five plants were eligible to participate in the WHS program. The program consisted of four evaluative components and an intervention component.

  16. Process Evaluation of a Workers' Health Surveillance Program for Meat Processing Workers

    NARCIS (Netherlands)

    van Holland, Berry; Brouwer, Sandra; de Boer, Michiel R; Reneman, Michiel F; Soer, Remko

    Objective To evaluate the implementation process of a workers' health surveillance (WHS) program in a Dutch meat processing company. Methods Workers from five plants were eligible to participate in the WHS program. The program consisted of four evaluative components and an intervention component.

  17. Effect of electroremediation application in the structure and contaminants of spent catalytics: Evaluation using NMR, EPR, DRX and XRF; Efeito da aplicacao da eletrorremediacao na estrutura e nos contaminantes de catalisador desativado: avaliacao por tecnicas de RMN, RPE, DRX e FRX

    Energy Technology Data Exchange (ETDEWEB)

    Leonel, R.F.; Valt, R.B.G.; Godoi, L.; Ponte, M.J.J.S.; Ponte, H.A. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil). Centro Politecnico

    2015-07-01

    The electrokinetic remediation process, through the application of electric potential and different electrolytes, aimed at mobilizing and removing contaminant metals in spent catalytic cracking catalysts. In this study, FCC spent catalysts were studied after the remediation process with three different electrolytes (solutions of sodium citrate, sulfuric acid or citric acid). The techniques of XRD, XRF, NMR and EPR were used in order to evaluate the changes. The results indicated that the electrokinetic remediation tends to reorganize the internal structure of the catalyst, recovering part of the crystallinity and removing a percentage of the contaminants. (author)

  18. Students’ views on the block evaluation process: A descriptive analysis

    Directory of Open Access Journals (Sweden)

    Ntefeleng E. Pakkies

    2016-03-01

    Full Text Available Background: Higher education institutions have executed policies and practices intended to determine and promote good teaching. Students’ evaluation of the teaching and learning process is seen as one measure of evaluating quality and effectiveness of instruction and courses. Policies and procedures guiding this process are discernible in universities, but it isoften not the case for nursing colleges. Objective: To analyse and describe the views of nursing students on block evaluation, and how feedback obtained from this process was managed.Method: A quantitative descriptive study was conducted amongst nursing students (n = 177 in their second to fourth year of training from one nursing college in KwaZulu-Natal. A questionnaire was administered by the researcher and data were analysed using the Statistical Package of Social Sciences Version 19.0. Results: The response rate was 145 (81.9%. The participants perceived the aim of block evaluation as improving the quality of teaching and enhancing their experiences as students.They questioned the significance of their input as stakeholders given that they had never been consulted about the development or review of the evaluation tool, or the administration process; and they often did not receive feedback from the evaluation they participated in. Conclusion: The college management should develop a clear organisational structure with supporting policies and operational guidelines for administering the evaluation process. The administration, implementation procedures, reporting of results and follow-up mechanisms should be made transparent and communicated to all concerned. Reports and actions related to these evaluations should provide feedback into relevant courses or programmes. Keywords: Student evaluation of teaching; perceptions; undergraduate nursing students; evaluation process

  19. An evaluation eMergetics of Itacoatiara's city in the central Amazon, their plywood, and cultivated plain of basin of Madeira's river; Uma avaliacao eMergetica da cidade de Itacoatiara na Amazonia Central, sua industria de compensado e laminado e a varzea da bacia do rio Madeira

    Energy Technology Data Exchange (ETDEWEB)

    Comar, Vito

    1994-12-01

    The plywood production system of Itacoatiara's industry and the wooden extraction impact of cultivated plain of basin of Madeira's river are presented. The incorporated energy flows - eMergy are evaluated by the models mathematical simulation, which applies to specific indices derivation aiming at the comparison with other similar processes. Itacoatiara's city was going analyzed regarding the industry load energetics and of others urban components.

  20. An evaluation eMergetics of Itacoatiara's city in the central Amazon, their plywood, and cultivated plain of basin of Madeira's river; Uma avaliacao eMergetica da cidade de Itacoatiara na Amazonia Central, sua industria de compensado e laminado e a varzea da bacia do rio Madeira

    Energy Technology Data Exchange (ETDEWEB)

    Comar, Vito

    1994-12-01

    The plywood production system of Itacoatiara's industry and the wooden extraction impact of cultivated plain of basin of Madeira's river are presented. The incorporated energy flows - eMergy are evaluated by the models mathematical simulation, which applies to specific indices derivation aiming at the comparison with other similar processes. Itacoatiara's city was going analyzed regarding the industry load energetics and of others urban components.

  1. Expert evaluation in NPP safety important systems licensing process

    International Nuclear Information System (INIS)

    Mikhail, A Yastrebenetsky; Vasilchenko, V.N.

    2001-01-01

    Expert evaluation of nuclear power plant safety important systems modernization is an integral part of these systems licensing process. The paper contains some aspects of this evaluation which are based on Ukrainian experience of VVER-1000 and VVER-440 modernization. (authors)

  2. Statistical Process Control in the Practice of Program Evaluation.

    Science.gov (United States)

    Posavac, Emil J.

    1995-01-01

    A technique developed to monitor the quality of manufactured products, statistical process control (SPC), incorporates several features that may prove attractive to evaluators. This paper reviews the history of SPC, suggests how the approach can enrich program evaluation, and illustrates its use in a hospital-based example. (SLD)

  3. Expert evaluation in NPP safety important systems licensing process

    Energy Technology Data Exchange (ETDEWEB)

    Mikhail, A Yastrebenetsky; Vasilchenko, V.N. [Ukrainian State Scientific Technical Center of Nuclear and Radiation Safety (Ukraine)

    2001-07-01

    Expert evaluation of nuclear power plant safety important systems modernization is an integral part of these systems licensing process. The paper contains some aspects of this evaluation which are based on Ukrainian experience of VVER-1000 and VVER-440 modernization. (authors)

  4. Evaluation of ultrasound inspection of steel H K-40 tubes used in oil processing plant furnaces; Avaliacao da inspecao ultra-sonica de tubos de aco HK-40 usado em fornos de plantas de processamento de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Staszczak, Eduardo Jose; Rebello, Joao Marcos Alcoforado; Riguera, Glaucio [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Lab. de Ensaios Nao-Destrutivos; Martins, Marcus Vinicius M.; Carneval, Ricardo de Oliveira [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

    2003-06-01

    The ultra-sound inspection is usually an alternative to the techniques used for the inspection of tubes of steel H K-40. Even so up to now it was not very analyzed it remains so much to real potentiality of the technique in what it refers to the minimum size of discontinuities for its detection with relationship to the characterization of the size of discontinuities and the respective ultra-sound signal. This work besides reviewing fundamental aspects of the problems of inspection of these tubes tries to relate the form of the ultra-sound signal with the size of the found discontinuities. (author)

  5. A Process For Performance Evaluation Of Real-Time Systems

    Directory of Open Access Journals (Sweden)

    Andrew J. Kornecki

    2003-12-01

    Full Text Available Real-time developers and engineers must not only meet the system functional requirements, but also the stringent timing requirements. One of the critical decisions leading to meeting these timing requirements is the selection of an operating system under which the software will be developed and run. Although there is ample documentation on real-time systems performance and evaluation, little can be found that combines such information into an efficient process for use by developers. As the software industry moves towards clearly defined processes, creation of appropriate guidelines describing a process for performance evaluation of real-time system would greatly benefit real-time developers. This technology transition research focuses on developing such a process. PROPERT (PROcess for Performance Evaluation of Real Time systems - the process described in this paper - is based upon established techniques for evaluating real-time systems. It organizes already existing real-time performance criteria and assessment techniques in a manner consistent with a well-formed process, based on the Personal Software Process concepts.

  6. The Judicial Process as a Form of Program Evaluation.