WorldWideScience

Sample records for evaluating research productivity

  1. Using Social Network Analysis to Evaluate Research Productivity and Collaborations

    Science.gov (United States)

    Royal, Kenneth D.; Akers, Kathryn S.; Lybarger, Melanie A.; Zakrajsek, Todd D.

    2014-01-01

    Research productivity and collaborations are essential aspects of advancing academia. Publishing is a critical mechanism in higher education to allow faculty members to share new information in all disciplinary fields. Due to its importance, scholarly work is often heavily considered for promotion, tenure, compensation, and other merit decisions.…

  2. IAEA coordinated research program on the evaluation of solidified high-level radioactive waste products

    International Nuclear Information System (INIS)

    Grover, J.R.; Schneider, K.J.

    1979-01-01

    A coordinated research program on the evaluation of solidified high-level radioactive waste products has been active with the IAEA since 1976. The program's objectives are to integrate research and to provide a data bank on an international basis in this subject area. Results and considerations to date are presented

  3. Measurement, calculation and evaluation of photon production data. Final report of a coordinated research project

    International Nuclear Information System (INIS)

    Oblozinsky, P.; Dietrich, F.S.; Mengoni, A.

    1999-12-01

    The report summarizes results of the Coordinated Research Project (CRP) devoted to photon preduction in neutron-induced reactions. The report presents 25 original contributions that reflect accomplishments achieved in measurement, calculation and evaluation of photon production under the project in 1994-1997. Major results are highlighted and a list of the CRP publications is given. (author)

  4. Lights, Camera, Action: Advancing Learning, Research, and Program Evaluation through Video Production in Educational Leadership Preparation

    Science.gov (United States)

    Friend, Jennifer; Militello, Matthew

    2015-01-01

    This article analyzes specific uses of digital video production in the field of educational leadership preparation, advancing a three-part framework that includes the use of video in (a) teaching and learning, (b) research methods, and (c) program evaluation and service to the profession. The first category within the framework examines videos…

  5. The Climate Impacts Research Consortium: Lessons Learned from the Evaluation of Co-production projects

    Science.gov (United States)

    Sokolovska, I.; Andrepont, J. A.; Lach, D.

    2017-12-01

    The Pacific Northwest Climate Impacts Research Consortium (CIRC) is a climate-science-to-climate-action team funded by the National Oceanic and Atmospheric Administration (NOAA), member of NOAA's Regional Integrated Sciences and Assessments (RISA) program. The internal evaluation of the last 6 years of CIRC's work focused on the co-production of knowledge process. The evaluation was based on CIRC's Reflection and Logic model and used a mixed methods design. During regular monthly meetings in 2014/15, all CIRC PIs reflected on the co-production process and presented their evaluation of the projects they worked on. Additionally, we conducted semi-structured interviews with CIRC participants, purposefully targeting key informants. The Climate Impacts Research Consortium teams also administered surveys to assess participants' experiences of the coproduction process as they were engaging in it. Identifying and cultivating an informant from the local stakeholder group with deep, accessible roots within the target community can lead to better coproduction results than having to build those relationships from naught. Across projects, most participants agreed that the project increased their understanding of their area's hazards and by the end of the project most participants were confident the project would produce useful results for themselves. Finally, most participants intended to share what they had learned from this experience with their colleagues and we found that co-production built capacities necessary for communities to incorporate climate change in discussions even after the end of CIRC's participation. During the projects, the involvement of non-traditional participants along with experts was critical to success and a lot of work and preparation needs to be put into the planning of any co-production meeting to overcome various barriers to communication and build trust.

  6. Quantitative and Qualitative Evaluation of Iranian Researchers' Scientific Production in Dentistry Subfields.

    Science.gov (United States)

    Yaminfirooz, Mousa; Motallebnejad, Mina; Gholinia, Hemmat; Esbakian, Somayeh

    2015-10-01

    As in other fields of medicine, scientific production in the field of dentistry has significant placement. This study aimed at quantitatively and qualitatively evaluating Iranian researchers' scientific output in the field of dentistry and determining their contribution in each of dentistry subfields and branches. This research was a scientometric study that applied quantitative and qualitative indices of Web of Science (WoS). Research population consisted of927indexed documents published under the name of Iran in the time span of 1993-2012 which were extracted from WoS on 10 March 2013. The Mann-Whitney test and Pearson correlation coefficient were used to data analyses in SPSS 19. 777 (83. 73%) of indexed items of all scientific output in WoS were scientific articles. The highest growth rate of scientific productionwith90% belonged to endodontic sub field. The correlation coefficient test showed that there was a significant positive relationship between the number of documents and their publication age (P scientific production in various subfields of dentistry were very different. It needs to reinforce the infrastructure for more balanced scientific production in the field and its related subfields.

  7. Clinical evaluation of marketed orthodontic products: are researchers behind the times? A meta-epidemiological study

    Directory of Open Access Journals (Sweden)

    Jadbinder Seehra

    2017-05-01

    Full Text Available Abstract Background The role of marketing and industry in the treatment decisions of orthodontists has received increasing attention in recent years with clinical research typically undertaken subsequent to established use of these devices and often failing to confirm the promise of manufacturers’ claims. This meta-epidemiological study was undertaken to assess the proportion of clinical trials in orthodontics evaluating commercially marketed products and to evaluate the direction of the results of these studies. Methods Electronic searching was undertaken to identify randomized controlled trials (RCTs published over a 5-year period (1 January 2012 to 31 December 2016. Data obtained included the type of marketed intervention, direction of effect and declaration of both industry sponsorship and conflict of interest. Results Eighty-four RCTs published in 23 scientific journals were included with the highest percentage in the American Journal of Dentofacial Orthopedics (AJO-DO (23.8%, followed by the European Journal of Orthodontics (EJO (14.3%, Journal of Orthodontics (JO (10.7% and Angle Orthodontist (AO (10.7%. Overall, 45% (38/84 of clinical trials assessed involved analysis of marketed products after their introduction. Interventions to improve oral health or circumvent the risk of iatrogenic damage, such as white spot lesions, were most commonly assessed (15.8%, with the relative merits of non-surgical adjuncts (14.1% and other orthodontic auxiliaries (13.1% also frequently evaluated. In 44% of RCTs, a positive effect of the marketed intervention was not reported. Industry sponsorship of the research was declared in 9.5% RCTs. No significant associations between the direction of the effect and both declaration of industry sponsorship (p = 0.56 and conflict of interest (p = 0.96 were detected. Moreover, for marketed and non-marketed products, no significant associations for both declaration of industry sponsorship (p = 0.44 and

  8. Evaluating Lignite-Derived Products (LDPs) for Agriculture - Does Research Inform Practice?

    Science.gov (United States)

    Patti, Antonio; Rose, Michael; Little, Karen; Jackson, Roy; Cavagnaro, Timothy

    2014-05-01

    Lignite-derived products (LDPs), including humic acids and organo-mineral soil conditioners, are being marketed in many parts of the world. They are promoted as plant growth stimulants, additives that improve plant nutrient uptake as well as providing humic materials to improve soil structure and combat soil degradation. There are mixed views regarding the efficacy of these products and there is a lack of scientific studies that verify the efficacy of these products in the field. Anecdotally, agricultural producers become repeat users of the products when they see economic benefits, such as increases in crop yields, while others abandon repeat use when no benefits were seen. In this paper, we present results from a literature meta-analysis1 and a number of field studies that examine the potential for LDPs to improve soil fertility and plant growth. Our findings suggest that complex interactions between LDPs, soil types, environmental conditions and plant species mean that a 'one-size fits all' product or solution is unlikely; and that changes to soil characteristics brought about by LDPs are more apparent over longer time periods than a single cropping season. Most of these studies have not been undertaken in full field trial conditions, where the crop has been grown to harvest. Limited studies in small plots or glass-house conditions often report early benefits. It is not known if these benefits persist. Moreover, the actual composition of these additives may vary significantly and is rarely specified in full. In a study of our own, a small plot experiment evaluated the effect of a single application of a commercial potassium humate product from Victorian lignite on ryegrass and lucerne grown in a sandy, nutrient deficient, low organic matter soil. Treatment resulted in increased shoot growth (up to 33%) of ryegrass during the pasture establishment phase. Root growth was also improved with a 47% increase at 0-10 cm depth and 122% increase at 10-30 cm depth

  9. Evaluating the Productivity of VA, NIH, and AHRQ Health Services Research Career Development Awardees.

    Science.gov (United States)

    Finney, John W; Amundson, Erin O; Bi, Xiaoyu; Cucciare, Michael A; Eisen, Seth A; Finlay, Andrea K; Halvorson, Max A; Hayashi, Ko; Owens, Douglas K; Maisel, Natalya C; Timko, Christine; Weitlauf, Julie C; Cronkite, Ruth C

    2016-04-01

    To evaluate the academic advancement and productivity of Department of Veterans Affairs Health Services Research and Development (HSR&D) Career Development Award (CDA) program recipients, National Institutes of Health (NIH) K awardees in health services research (HSR), and Agency for Healthcare Research and Quality (AHRQ) K awardees. In all, 219 HSR&D CDA recipients from fiscal year (FY) 1991 through FY2010; 154 NIH K01, K08, and K23 awardees FY1991-FY2010; and 69 AHRQ K01 and K08 awardees FY2000-FY2010 were included. Most data were obtained from curricula vitae. Academic advancement, publications, grants, recognition, and mentoring were compared after adjusting for years since award, and personal characteristics, training, and productivity prior to the award. No significant differences emerged in covariate-adjusted tenure-track academic rank, number of grants as primary investigator (PI), major journal articles as first/sole author, Hirsch h-index scores, likelihood of a journal editorship position or membership in a major granting review panel, or mentoring postgraduate researchers between the HSR&D CDA and NIH K awardees from FY1991-FY2010, or among the three groups of awardees from FY2000 or later. Among those who reported grant funding levels, HSR&D CDAs from FY1991-2010 had been PI on more grants of $100,000 than NIH K awardees. HSR&D CDAs had a higher mean number of major journal articles than NIH K awardees from FY1991-2010. Findings show that all three HSR career development programs are successfully selecting and mentoring awardees, ensuring additional HSR capacity to improve the quality and delivery of high-value care.

  10. Some Observations on the Relationships Between Research Productivity and Student Evaluations of Courses and Teaching.

    Science.gov (United States)

    Stallings, William A.; Singhal, Sushila

    "Does the good researcher tend to be a good teacher, and vice versa?" University administrators contend that teaching and research are equally important, though students claim that researchers neglect teaching and professors claim that only their research efforts are rewarded. In this study, course and instructor evaluations were defined…

  11. Building research capacity and productivity among advanced practice nurses: an evaluation of the Community of Practice model.

    Science.gov (United States)

    Gullick, Janice G; West, Sandra H

    2016-03-01

    The aim of this study was to evaluate Wenger's Community of Practice as a framework for building research capacity and productivity. While research productivity is an expected domain in influential models of advanced nursing practice, internationally it remains largely unmet. Establishment of nursing research capacity precedes productivity and consequently, there is a strong imperative to identify successful capacity-building models for nursing-focussed research in busy clinical environments. Prospective, longitudinal, qualitative descriptive design was used in this study. Bruyn's participant observation framed evaluation of a Community of Practice comprising 25 advanced practice nurses. Data from focus groups, education evaluations, blog/email transcripts and field observations, collected between 2007 and 2014, were analysed using a qualitative descriptive method. The Community of Practice model invited differing levels of participation, allowed for evolution of the research community and created a rhythm of research-related interactions and enduring research relationships. Participants described the value of research for their patients and families and the significance of the developing research culture in providing richness to their practice and visibility of their work to multidisciplinary colleagues. Extensive examples of research dissemination and enrolment in doctoral programmes further confirmed this value. A Community of Practice framework is a powerful model enabling research capacity and productivity evidenced by publication. In developing a solid foundation for a nursing research culture, it should be recognized that research skills, confidence and growth develop over an extended period of time and success depends on skilled coordination and leadership. © 2015 John Wiley & Sons Ltd.

  12. Research on the performance evaluation of agricultural products supply chain integrated operation

    Science.gov (United States)

    Jiang, Jiake; Wang, Xifu; Liu, Yang

    2017-04-01

    The agricultural product supply chain integrated operation can ensure the quality and efficiency of agricultural products, and achieve the optimal goal of low cost and high service. This paper establishes a performance evaluation index system of agricultural products supply chain integration operation based on the development status of agricultural products and SCOR, BSC and KPI model. And then, we constructing rough set theory and BP neural network comprehensive evaluation model with the aid of Rosetta and MATLAB tools and the case study is about the development of agricultural products integrated supply chain in Jing-Jin-Ji region. And finally, we obtain the corresponding performance results, and give some improvement measures and management recommendations to the managers.

  13. Research evaluation

    DEFF Research Database (Denmark)

    Pedersen, David Budtz

    2014-01-01

    decisions that have marked the period since the first edition was researched and published. In addition, to help make ESTE more global and interdisciplinary in scope and reach, the second edition will engage consultants from ethics centers around the world, and will feature the revised title Ethics, Science...

  14. A numerically research on energy loss evaluation in a centrifugal pump system based on local entropy production method

    Directory of Open Access Journals (Sweden)

    Hou Hucan

    2017-01-01

    Full Text Available Inspired by wide application of the second law of thermodynamics to flow and heat transfer devices, local entropy production analysis method was creatively introduced into energy assessment system of centrifugal water pump. Based on Reynolds stress turbulent model and energy equation model, the steady numerical simulation of the whole flow passage of one IS centrifugal pump was carried out. The local entropy production terms were calculated by user defined functions, mainly including wall entropy production, turbulent entropy production, and viscous entropy production. The numerical results indicated that the irreversible energy loss calculated by the local entropy production method agreed well with that calculated by the traditional method but with some deviations which were probably caused by high rotatability and high curvature of impeller and volute. The wall entropy production and turbulent entropy production took up large part of the whole entropy production about 48.61% and 47.91%, respectively, which indicated that wall friction and turbulent fluctuation were the major factors in affecting irreversible energy loss. Meanwhile, the entropy production rate distribution was discussed and compared with turbulent kinetic energy dissipation rate distribution, it showed that turbulent entropy production rate increased sharply at the near wall regions and both distributed more uniformly. The blade region in leading edge near suction side, trailing edge and volute tongue were the main regions to generate irreversible exergy loss. This research broadens a completely new view in evaluating energy loss and further optimizes pump using entropy production minimization.

  15. Animal Production Research Advances

    African Journals Online (AJOL)

    Animal Production Research Advances is a peer-review journal established expressly to promote the production of all animal species utilized as food. The journal has an international scope and is intended for professionals in animal production and related sciences. We solicit contributions from animal production and ...

  16. An Evaluation of h-Index as a Measure of Research Productivity Among Canadian Academic Plastic Surgeons.

    Science.gov (United States)

    Hu, Jiayi; Gholami, Arian; Stone, Nicholas; Bartoszko, Justyna; Thoma, Achilleas

    2018-02-01

    Evaluation of research productivity among plastic surgeons can be complex. The Hirsch index (h-index) was recently introduced to evaluate both the quality and quantity of one's research activity. It has been proposed to be valuable in assessing promotions and grant funding within academic medicine, including plastic surgery. Our objective is to evaluate research productivity among Canadian academic plastic surgeons using the h-index. A list of Canadian academic plastic surgeons was obtained from websites of academic training programs. The h-index was retrieved using the Scopus database. Relevant demographic and academic factors were collected and their effects on the h-index were analyzed using the t test and Wilcoxon Mann-Whitney U test. Nominal and categorical variables were analyzed using χ 2 test and 1-way analysis of variance. Univariate and multivariate models were built a priori. All P values were 2 sided, and P h-index of 7.6. Over 80% of the surgeons were male. Both univariable and multivariable analysis showed that graduate degree ( P h-index. Limitations of the study include that the Scopus database and the websites of training programs were not always up-to-date. The h-index is a novel tool for evaluating research productivity in academic medicine, and this study shows that the h-index can also serve as a useful metric for measuring research productivity in the Canadian plastic surgery community. Plastic surgeons would be wise to familiarize themselves with the h-index concept and should consider using it as an adjunct to existing metrics such as total publication number.

  17. Summary report of the second research co-ordination meeting on measurement, calculation and evaluation of photon production data

    International Nuclear Information System (INIS)

    Oblozinsky, P.

    1996-12-01

    The present report contains the summary of the Second Research Co-ordination Meeting on ''Measurement, Calculation and Evaluation of Photon Production Data'', held in Vienna, Austria, from 21 to 24 May 1996. Summarized are conclusions and recommendations of the meeting together with a detailed list of actions and deadlines, including procedures to prepare the final document of the project. Attached is the agenda of the meeting, list of participants and extended abstracts of their presentations. (author). Refs, figs, tabs

  18. Summary report of the third research co-ordination meeting on measurement, calculation and evaluation of photon production data

    International Nuclear Information System (INIS)

    Oblozinsky, P.

    1998-01-01

    The present report contains the account of the last meeting of the Co-ordinated Research Project on ''Measurement, Calculation and Evaluation of Photon Production Data''. In addition to the summary of the meeting, the overall results achieved under the project in 1994-1997 are summarized, including the list of publications. The status of work on the Final Report of the project is also given. (author)

  19. Research Note--Should Consumers Use the Halo to Form Product Evaluations?

    OpenAIRE

    Peter Boatwright; Ajay Kalra; Wei Zhang

    2008-01-01

    In purchase situations where attribute information is either missing or difficult to judge, a well-known heuristic that consumers use to form evaluations is the halo effect. The psychology literature has widely considered the halo a reflection of consumers' inability to discriminate between different attributes and have therefore labeled it the "halo error" or the "logical error." The objective of this paper is to offer a rationale for the halo effect. We use a decision-theory framework to sh...

  20. Leading research in FY 1995. Research of product evaluation and advanced measurements - Part 1 (product evaluation); 1995 nendo sendo kenkyu. Seihin hyoka kodo keisoku bunseki gijutsu ni kansuru chosa kenkyu - 1 (seihin hyoka)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-03-01

    Product evaluation has been investigated from a viewpoint of compatibility with human life by considering human being as the subject of life. This report describes the investigation results. Product evaluation is defined as evaluating products on a consumer-oriented viewpoint and informing consumers of the evaluation results. According to a questionnaire survey with regard to daily living products, products in the low degree of satisfaction in their usage were electric tooth brush, video camera, electric rice jar, vacuum cleaner, and electric iron. Contents of dissatisfaction with these products were classified by aspect, i.e., human aspect regarding human body/recognition, life aspect regarding functions of products and how to use them, and sensitivity aspect such as appearance of products. Thus, points at issue were clarified. As regards the human aspect, incompatibility between the size/form of products and human body/posture, and recognition psychological incompatibility such as difficulty in understanding function or operation of products were pointed out. Establishment of a method for measuring and evaluating the human`s body functions and the compatibility with products, and necessity of the acquisition of human`s body characteristic data and the consolidation positions are also described. 4 refs., 42 figs., 30 tabs.

  1. Research Productivity and Academics' Conceptions of Research

    Science.gov (United States)

    Brew, Angela; Boud, David; Namgung, Sang Un; Lucas, Lisa; Crawford, Karin

    2016-01-01

    This paper asks the question: do people with different levels of research productivity and identification as a researcher think of research differently? It discusses a study that differentiated levels of research productivity among English and Australian academics working in research-intensive environments in three broad discipline areas: science,…

  2. Farmers Participatory Research in the Evaluation of Maize Crop Residues for Improved Dairy Cattle Production in Eastern Kenya

    International Nuclear Information System (INIS)

    Kiruiro, E.M.; Kariuki, I.W.; Kang'ara, J.; Ouma, O.

    1999-01-01

    Informal and formal surveys, and participatory rural appraisal conducted within the coffee land-use system of Embu District in Eastern Kenya identified feed shortage as a major constraint to increased dairy production on small holder farms. To address this constraint, a two-year (1996-1998) on-farm research project involving 20 farms in Manyatta division, Embu District was initiated with broad objectives of developing components technologies that would use maize crop residues. This was due to the recognition of the fact that the greatest potential for improving field availability would be in the exploitation of crop residues, especially those derived from maize, the main staple crop in the region. Based on these reality appropriate technologies that would offer viable offers for the use of crop residues were identified and discussed during workshops and meetings with farmers. Component technologies considered included drying of maize leaves after defoliation and post-harvest storage methods for dry maize stover. this paper discussed the results of the participatory research in context of farmers' involvement in the technology development, testing, evaluation and promotion. The study demonstrated that involving farmers in all stages of the research process, enhanced their interest and participation in the testing and subsequent adoption of appropriate technologies

  3. Software product family evaluation

    NARCIS (Netherlands)

    van der Linden, F; Bosch, J; Kamsties, E; Kansala, K; Krzanik, L; Obbink, H; VanDerLinden, F

    2004-01-01

    This paper proposes a 4-dimensional software product family engineering evaluation model. The 4 dimensions relate to the software engineering concerns of business, architecture, organisation and process. The evaluation model is meant to be used within organisations to determine the status of their

  4. SHDAS Production Seismometer Evaluation.

    Energy Technology Data Exchange (ETDEWEB)

    Slad, George William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Merchant, Bion J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-11-01

    The Seismo - Hydroacoustic Data Acquisition System (SHDAS) is undergoing evaluation in preparation for its engineering, development, and deployment by the U.S Navy as an ocean bottom seismic monitoring system. At the current stage of development, the production seismometers are being evaluated to confirm their performance prior to packaging and assembly for deployment. The testing of the seismometers is being conducted at the Pinon Flats Observatory (PFO) , supervised by Sandia National Laboratories, U.S Navy, and RP Kromer Consulting. SNL will conduct evaluation of the collected seismometer data and comment on the performance of the seismometers.

  5. SHDAS Production Digitizer Evaluation.

    Energy Technology Data Exchange (ETDEWEB)

    Merchant, Bion J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-07-01

    The Seismo-Hydroacoustic Data Acquisition System (SHDAS) is undergoing evaluation in preparation for its engineering, development, and deployment by the U.S Navy as an ocean bottom seismic monitoring system. At the current stage of development, the production digitizers are being evaluated to confirm their performance prior to packaging and assembly for deployment. The testing of the digitizers is being conducted at Delta Group Electronics, the digitizer fabricator, in San Diego, California, performed by Sandia National Laboratories with the assistance of Leidos and Delta Group Electronics.

  6. Animal Production Research Advances: Submissions

    African Journals Online (AJOL)

    Where this is not possible, authors should submit two copies of original article not yet published anywhere and accompanied with a 3.5” diskette containing the article labeled appropriately in MS Word version to: Editor–in–Chief, Animal Production Research Advances Tropical Animal Health and Production Research Lab

  7. Research Productivity of Sports Medicine Fellowship Faculty

    OpenAIRE

    Cvetanovich, Gregory L.; Saltzman, Bryan M.; Chalmers, Peter N.; Frank, Rachel M.; Cole, Brian J.; Bach, Bernard R.

    2016-01-01

    Background: Research productivity is considered an important factor in academic advancement in sports medicine. No study to date has evaluated academic productivity and correlates of academic rank for sports medicine fellowship faculty. Purpose: To describe the academic productivity of American Orthopaedic Society for Sports Medicine (AOSSM) fellowship program faculty and to determine the association between academic productivity, fellowship characteristics, and academic rank. Study Design: D...

  8. Flood Fighting Products Research Facility

    Data.gov (United States)

    Federal Laboratory Consortium — A wave research basin at the ERDC Coastal and Hydraulics Laboratory has been modified specifically for testing of temporary, barrier-type, flood fighting products....

  9. Norwegian climate research. An evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-06-15

    [English] In early 2011, the Norwegian Research Council (RCN) appointed a committee to review Norwegian climate research. The aim of the evaluation was to provide a critical review of Norwegian climate research in an international perspective and to recommend measures to enhance the quality, efficiency and relevance of future climate research. The Evaluation Committee met three times: in August and December 2011, and March 2012. RCN sent an invitation to 140 research organisations to participate by delivering background information on their climate research. Based on the initial response, 48 research units were invited to submit self-assessments and 37 research units responded. These were invited to hearings during the second meeting of the Evaluation Committee in December. In our judgement, a great majority of the most active research units are covered by this evaluation report. It should be emphasised that the evaluation concerned the Norwegian landscape of climate research rather than individual scientists or research units. Bibliometric analyses and social network analyses provided additional information. We are aware of problems in making comparisons across disciplinary publishing traditions, especially with regard to the differences between the natural and social sciences and the humanities. The Evaluation Committee also reviewed a number of governmental and RCN policy documents and conducted interviews with the chairs of the NORKLIMA Programme Steering Board and the Norwegian IPY Committee, as well as with staff members of RCN. Additional information was received from hearings organised by RCN with the science communities and various stakeholders in January 2012. For the purpose of this evaluation, climate research was divided into three broad thematic areas: 1. The climate system and climate change: research on climate variability and change in order to improve our capability of understanding climate and of projecting climate change for different time

  10. Scaling Research Results: Design and Evaluation | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Design and evaluation The project will provide helpful guidance to IDRC management and ... scaling and programming for scalable research Offer the monograph in multiple forms, ... Asian outlook: New growth dependent on new productivity.

  11. Time management strategies for research productivity.

    Science.gov (United States)

    Chase, Jo-Ana D; Topp, Robert; Smith, Carol E; Cohen, Marlene Z; Fahrenwald, Nancy; Zerwic, Julie J; Benefield, Lazelle E; Anderson, Cindy M; Conn, Vicki S

    2013-02-01

    Researchers function in a complex environment and carry multiple role responsibilities. This environment is prone to various distractions that can derail productivity and decrease efficiency. Effective time management allows researchers to maintain focus on their work, contributing to research productivity. Thus, improving time management skills is essential to developing and sustaining a successful program of research. This article presents time management strategies addressing behaviors surrounding time assessment, planning, and monitoring. Herein, the Western Journal of Nursing Research editorial board recommends strategies to enhance time management, including setting realistic goals, prioritizing, and optimizing planning. Involving a team, problem-solving barriers, and early management of potential distractions can facilitate maintaining focus on a research program. Continually evaluating the effectiveness of time management strategies allows researchers to identify areas of improvement and recognize progress.

  12. Improvement of measurements, theoretical computations and evaluations of neutron induced helium production cross sections. Summary report on the third and final research co-ordination meeting

    International Nuclear Information System (INIS)

    Pashchenko, A.B.

    1996-09-01

    The present report contains the Summary of the Third and Final IAEA Research Co-ordination Meeting (RCM) on ''Improvement of Measurements, Theoretical Computations and Evaluations of Neutron Induced Helium Production Cross Sections'' which was hosted by the Tohoku University and held in Sendai, Japan, from 25 to 29 September 1995. This RCM was organized by the IAEA Nuclear Data Section (NDS), with the co-operation and assistance of local organizers from Tohoku University. Summarized are the proceedings and results of the meeting. The List of Participants and meeting Agenda are included. (author)

  13. Radioisotopes In Animal Production Research

    International Nuclear Information System (INIS)

    Eduvie, L.O.

    1994-05-01

    Animal productivity may be measured among others, in terms of two important physiological processes of reproduction and growth each of which involves a number of integrated disciplines. Both physiological processes are controlled by interactions of genotype and environment. Reproduction essentially involves complex physiological processes controlled by secretions of endocrine glands known as hormones. On the other hand growth is determined largely by availabilty of essential nutrients. In order to achieve good reproductive and growth rates adequate and constant nutrition for livestock include pasture, cereals, tubers and their by-products as well as industrial by-products. While reproduction is essential to provide the required number and replacement of livestock, growth guarantees availability of meat. Another aspect of livestock production is disease control. An animal needs a good health to adequately express its genetic make up and utilize available nutrition. Research in animal production is aimed at improving all aspects of productivity of livestock which include reproduction, growth, milk production, egg production, good semen etc. of livestock. In order to achieve this an understanding of the biochemical and physiological processes occurring in the animal itself, and in the feedstuff fed to the animal as well as the aetiology and control of diseases affecting the animal among other factors, is desirable. A number of methods of investigation have evolved with time. These include colorimetry, spectrophotometry, chromatography, microscopy and raidoisotopic tracer methods. While most of these methods are cumbersome and use equipment with low precision, radioisotopic tracer methods utilize equipment with relatively high precision

  14. Scientometrics, International Special Indexes, scientific productivity evaluation

    Directory of Open Access Journals (Sweden)

    Abdolreza Noroozi Chakoli

    2014-12-01

    Full Text Available This research aims at identifying and validating of indicators used to evaluate research productivity of Iranian researchers. In order to achieve this aim survey and documentary methods are used. Research society consists of a 80 person sample and members of this sample were selected among top researchers of country during recent years (1389-1390 from 4 subject areas of humanities, medical sciences, technology and engineering and basic sciences. Instrument for collecting data is a questionnaire including 47 items focusing on indicators used to evaluate research productivity of researchers. The Cronbach’s coefficient alpha was applied to confirm it’s variability and coefficient equal to 96% was obtained. In order to confirm its validity, formal validity method was used. Responding to questions and testing research hypotheses was conducted at two levels of descriptive and inferential statistics. At the descriptive statistics level, standard deviation, average and frequency and at the inferential statistic’s level, variance analysis, least significant difference and Friedman tests were used. Results of research show that for researchers of humanities, the indicators related to book have high importance while for researchers of basic and medical sciences, indicators related to article have more importance and from point of view of technology and engineering researchers, indicators related to innovations and research plans in comparison to other indicators are more credit at evaluating research productivity of researchers.

  15. The Impact of Animal Rights on the Use of Animals for Biomedical Research, Product Testing and Evaluation.

    Science.gov (United States)

    Baier, Stephen W.

    1993-01-01

    Clarifies the issues of animal rights as they effect animal use in research and education through an examination of the current use of animals, a historical look at animal use, and a consideration of the philosophical underpinnings of the animal rights and pro-use viewpoints. (PR)

  16. Yellow-cedar in vitro clonal production and evaluation of propagules for reforestation. FRDA research memo No. 211

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    Technical note describing a project that was part of an ongoing effort to develop micropropagation techniques on an operation scale and to investigate their possible use in producing genetically improved stock for planting. The project developed a commercially viable process that uses organogenic micropropagation to produce yellow-cedar stock for operational reforestation; evaluated the techniques for developing genetically improved clones; and established demonstration plots of mircopropagules.

  17. Multicriteria Evaluation of Product Quality

    OpenAIRE

    Pabedinskaitė, Arnoldina; Vitkauskas, Romualdas

    2009-01-01

    Product quality assessment is a complex task. The aim of this paper is to analyse the concepts of quality, different quality management models and their interaction with knowledge management models and the presented criteria system for assessing product quality. Moreover, multicriteria methods and their applicability to assessment of the product quality are analysed. On the basis of group of the product quality criteria and using the multicriteria evaluation methods, the quality of the produc...

  18. Impact of research investment on scientific productivity of junior researchers.

    Science.gov (United States)

    Farrokhyar, Forough; Bianco, Daniela; Dao, Dyda; Ghert, Michelle; Andruszkiewicz, Nicole; Sussman, Jonathan; Ginsberg, Jeffrey S

    2016-12-01

    There is a demand for providing evidence on the effectiveness of research investments on the promotion of novice researchers' scientific productivity and production of research with new initiatives and innovations. We used a mixed method approach to evaluate the funding effect of the New Investigator Fund (NIF) by comparing scientific productivity between award recipients and non-recipients. We reviewed NIF grant applications submitted from 2004 to 2013. Scientific productivity was assessed by confirming the publication of the NIF-submitted application. Online databases were searched, independently and in duplicate, to locate the publications. Applicants' perceptions and experiences were collected through a short survey and categorized into specified themes. Multivariable logistic regression was performed. Odds ratios (OR) with 95 % confidence intervals (CI) are reported. Of 296 applicants, 163 (55 %) were awarded. Gender, affiliation, and field of expertise did not affect funding decisions. More physicians with graduate education (32.0 %) and applicants with a doctorate degree (21.5 %) were awarded than applicants without postgraduate education (9.8 %). Basic science research (28.8 %), randomized controlled trials (24.5 %), and feasibility/pilot trials (13.3 %) were awarded more than observational designs (p   scientific productivity and professional growth of novice investigators and production of research with new initiatives and innovations. Further efforts are recommended to enhance the support of small grant funding programs.

  19. Citation analysis in research evaluation

    CERN Document Server

    Moed, Henk F

    2005-01-01

    This book is written for members of the scholarly research community, and for persons involved in research evaluation and research policy. More specifically, it is directed towards the following four main groups of readers: - All scientists and scholars who have been or will be subjected to a quantitative assessment of research performance using citation analysis. - Research policy makers and managers who wish to become conversant with the basic features of citation analysis, and about its potentialities and limitations. - Members of peer review committees and other evaluators, who consider th

  20. Research evaluation support services in biomedical libraries.

    Science.gov (United States)

    Gutzman, Karen Elizabeth; Bales, Michael E; Belter, Christopher W; Chambers, Thane; Chan, Liza; Holmes, Kristi L; Lu, Ya-Ling; Palmer, Lisa A; Reznik-Zellen, Rebecca C; Sarli, Cathy C; Suiter, Amy M; Wheeler, Terrie R

    2018-01-01

    The paper provides a review of current practices related to evaluation support services reported by seven biomedical and research libraries. A group of seven libraries from the United States and Canada described their experiences with establishing evaluation support services at their libraries. A questionnaire was distributed among the libraries to elicit information as to program development, service and staffing models, campus partnerships, training, products such as tools and reports, and resources used for evaluation support services. The libraries also reported interesting projects, lessons learned, and future plans. The seven libraries profiled in this paper report a variety of service models in providing evaluation support services to meet the needs of campus stakeholders. The service models range from research center cores, partnerships with research groups, and library programs with staff dedicated to evaluation support services. A variety of products and services were described such as an automated tool to develop rank-based metrics, consultation on appropriate metrics to use for evaluation, customized publication and citation reports, resource guides, classes and training, and others. Implementing these services has allowed the libraries to expand their roles on campus and to contribute more directly to the research missions of their institutions. Libraries can leverage a variety of evaluation support services as an opportunity to successfully meet an array of challenges confronting the biomedical research community, including robust efforts to report and demonstrate tangible and meaningful outcomes of biomedical research and clinical care. These services represent a transformative direction that can be emulated by other biomedical and research libraries.

  1. Research on the teaching evaluation reform of agricultural eco-environmental protection specialties under the background of deep integration of production and education

    Science.gov (United States)

    Ma, Guosheng

    2018-02-01

    With the implementation of the personnel training mode of deep integration between production and education, the original evaluation method cannot adapt to the goal of personnel training, so that the traditional teaching evaluation methods need to be reformed urgently. This paper studies and analyzes the four main problems in the teaching evaluation of agricultural eco-environmental protection specialties, and puts forward three measures to reform the teaching evaluation methods: establishing diversified evaluation indexes, establishing diversified evaluation subjects, and establishing diversified evaluation feedback mechanisms.

  2. Research on hydrogen production system

    International Nuclear Information System (INIS)

    Nakagiri, Toshio

    2002-07-01

    Hydrogen is closely watched for environmental issues in recent years. In this research, hydrogen production systems and production techniques are widely investigated, and selected some hydrogen production process which have high validity for FBR system. Conclusions of the investigation are shown below. (1) Water-electrolysis processes and steam reform processes at low temperatures are already realized in other fields, so they well be easily adopted for FBR system. FBR system has no advantage when compared with other systems, because water-electrolysis processes can be adopted for other electricity generation system. On the other hand, FBR system has an advantage when steam reforming processes at low temperatures will be adopted, because steam reforming processes at 550-600degC can't be adopted for LWR. (2) Thermochemical processes will be able to adopted for FBR when process temperature will be lowered and material problems solved, because their efficiencies are expected high. Radiolysis processes which use ray (for example, gamma rya) emitted in reactor can be generate hydrogen easily, so they will be able to be adopted for FBR if splitting efficiency will be higher. Further investigation and R and D to realize these processes are considered necessary. (author)

  3. Evaluation of Research in Engineering Science in Norway

    DEFF Research Database (Denmark)

    Van Brussel, Hendrik Van Brussel; Lindberg, Bengt; Cederwall, Klas

    This report presents the conclusions of Panel 1: Construction engineering, Production and Operation. The Research Council of Norway (NFR) appointed three expert panels to evaluate Research in Engineering Science in Norway .......This report presents the conclusions of Panel 1: Construction engineering, Production and Operation. The Research Council of Norway (NFR) appointed three expert panels to evaluate Research in Engineering Science in Norway ....

  4. Heat transfer characteristics evaluation of heat exchangers of mock-up test facility with full-scale reaction tube for HTTR hydrogen production system (Contract research)

    International Nuclear Information System (INIS)

    Shimizu, Akira; Ohashi, Hirofumi; Kato, Michio; Hayashi, Koji; Aita, Hideki; Nishihara, Tetsuo; Inaba, Yoshitomo; Takada, Shoji; Morisaki, Norihiro; Sakaki, Akihiro; Maeda, Yukimasa; Sato, Hiroyuki; Inagaki, Yoshiyuki; Hanawa, Hiromi; Fujisaki, Katsuo; Yonekawa, Hideo

    2005-06-01

    Connection of hydrogen production system by steam reforming of methane to the High Temperature Engineering Test Reactor (HTTR) of the Japan Atomic Energy Research Institute (JAERI) has been surveyed until now. Mock-up test facility of this steam reforming system with full-scale reaction tube was constructed in FY 2001 and hydrogen of 120 Nm 3 /h was successfully produced in overall performance test. Totally 7 times operational tests were performed from March 2002 to December 2004. A lot of operational test data on heat exchanges were obtained in these tests. In this report specifications and structures of steam reformer, steam superheater, steam generator, condenser, helium gas cooler, feed gas heater and feed gas superheater were described. Heat transfer correlation equations for inside and outside tube were chosen from references. Spreadsheet programs were newly made to evaluate heat transfer characteristics from measured test data such as inlet and outlet temperature pressure and flow-rate. Overall heat-transfer coefficients obtained from the experimental data were compared and evaluated with the calculated values with heat transfer correlation equation. As a result, actual measurement values of all heat exchangers gave close agreement with the calculated values with correlation equations. Thermal efficiencies of the heat exchangers were adequate as they were well accorded with design value. (author)

  5. Norwegian climate research. An evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    From the executive summary; Based on our evaluation, we make six major recommendations and provide suggestions for how these might be implemented. 1. Establish a clear and coherent national strategy for climate research and its funding. 2. The Research Council of Norway should develop a new integrated long-term climate research programme. 3. Build on strengths and develop capacities in areas where Norway currently lacks sufficient scientific expertise. 4. Ensure societal relevance as well as inter- and transdisciplinarity in research. 5. Emphasise collaboration and cooperation as a basis for successful climate research. 6. Prioritise outreach and stakeholder interaction.(Author)

  6. Research Planning and Evaluation Project

    International Nuclear Information System (INIS)

    Song, Seunghyun; Kim, Doyang; Ryu, Byunghoon; Lim, Chaeyoung; Song, Leeyoung; Lee, Youngchul; Han, Changsun; Kim, Hackchoon

    2011-12-01

    - To activate R and D through a systematic and impartial evaluation by using information on efficient distribution of research resource, setting project priorities, and measuring achievement against goals produced after research on planning and evaluation system for the government-funded project for KAERI was conducted. - Nuclear R and D project is the representative national R and D project which has been implemented in Korea. For the sustainable development of nuclear energy which supplies about 40% of total electricity generation and the enhancement of it innovative ability in the future, a systematic and efficient strategy in the planning stage is required

  7. Nondestructive quality evaluation technology of agricultural products

    International Nuclear Information System (INIS)

    Noh, Sang Ha

    1997-01-01

    Quality evaluation of agricultural products has been interested to many researchers for many years and as the result, several nondestructive techniques and so many papers have been reported for quality evaluation of agricultural products. These nondestructive techniques are based on the detection of mechanical, optical, electrical, electro-magnetical, dielectric and vibrational properties of agricultural products that are well correlated with certain quality factors of the products such as color, shape, firmness, sugar content, external or internal defects, moisture content, etc. The sophistication of nondestructive methods has evolved rapidly with modem technologies. In this paper an emphasis was put on reviewing some of those papers and techniques which could be led to on-line measurement for practical use.

  8. Research evaluation and organizational learning

    DEFF Research Database (Denmark)

    Hansson, Finn

    The paper will address the role of the recent implementation of systems of research evaluation in universities. The role of classic quality control system, the peer review, is to produce the most trustworthy knowledge and at the same time function as a learning system in a peer-to-peer learning p...

  9. A Causal Model of Faculty Research Productivity.

    Science.gov (United States)

    Bean, John P.

    A causal model of faculty research productivity was developed through a survey of the literature. Models of organizational behavior, organizational effectiveness, and motivation were synthesized into a causal model of productivity. Two general types of variables were assumed to affect individual research productivity: institutional variables and…

  10. Production and Distribution Research Center

    Science.gov (United States)

    1986-05-01

    Steel, Coca Cola , Standard Oil of Ohio, and Martin Marietta have been involved in joint research with members of the Center. The number of Faculty...permitted the establishment of the Center and supports its continuing development. The Center has also received research sponsorship from the Joint...published relating to results developed within the PDRC under Offce of Naval Research sponsorship . These reports are listed in Appendix A. Many of these

  11. Product evaluation phase 1 report

    International Nuclear Information System (INIS)

    Kearsey, H.A.; Cumming, I.W.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of irradiated nuclear fuel at BNFL Sellafield. The waste occurs as the product of the process to remove carbon-14 from the THORP dissolver off-gas using a caustic scrubber. The carbon dioxide released during fuel dissolution is ultimately fixed as barium carbonate. Headings are: introduction (origin of waste, current stocks and future arisings); waste characterisation; initial evaluation of potential matrices for encapsulation of waste in form suitable for disposal; waste simulation. (U.K.)

  12. AN EVALUATION OF VALIDITY OF THE SECOND TOYOTA’S MANAGEMENT PRINCIPLE FACTORS WITH THE USE OF THE BOST RESEARCH IN A CHOSEN PRODUCTION COMPANY

    Directory of Open Access Journals (Sweden)

    Stanisław BORKOWSKI

    2014-04-01

    Full Text Available The paper presents the assumptions and method of significance evaluation of the second Toyota’s management principle in the production process of chosen company manufacturing flexible packaging for the food industry. Opinions about examined topic were obtained from the company's production workers with the use of innovative BOST questionnaire survey. An analysis of responses using basic statistical parameters, Pareto‐Lorenz diagram and ABC method, correlation coefficients were conducted and the results of using different graphical forms were presented. As the results of the analysis it was identified the series of validity of factors of the second Toyota’s management principle, which is in the examined company as follows: continuous system of disclousuring problems (CP > stop production when it detects a problem of quality (PE > the use of visual control (SW > standard tasks, processes, documents (SZ > the use only reliable technology (ST > delagate authority down (EU.

  13. Evaluation of Nuclear Hydrogen Production System

    International Nuclear Information System (INIS)

    Park, Won Seok; Park, C. K.; Park, J. K. and others

    2006-04-01

    The major objective of this work is tow-fold: one is to develop a methodology to determine the best VHTR types for the nuclear hydrogen demonstration project and the other is to evaluate the various hydrogen production methods in terms of the technical feasibility and the effectiveness for the optimization of the nuclear hydrogen system. Both top-tier requirements and design requirements have been defined for the nuclear hydrogen system. For the determination of the VHTR type, a comparative study on the reference reactors, PBR and PBR, was conducted. Based on the analytic hierarchy process (AHP) method, a systematic methodology has been developed to compare the two VHTR types. Another scheme to determine the minimum reactor power was developed as well. Regarding the hydrogen production methods, comparison indices were defined and they were applied to the IS (Iodine-Sulfur) scheme, Westinghouse process, and the, high-temperature electrolysis method. For the HTE, IS, and MMI cycle, the thermal efficiency of hydrogen production were systematically evaluated. For the IS cycle, an overall process was identified and the functionality of some key components was identified. The economy of the nuclear hydrogen was evaluated, relative to various primary energy including natural gas coal, grid-electricity, and renewable. For the international collaborations, two joint research centers were established: NH-JRC between Korea and China and NH-JDC between Korea and US. Currently, several joint researches are underway through the research centers

  14. Beyond Research Productivity: Matching Productivity Measures to Institutional Mission

    Directory of Open Access Journals (Sweden)

    Patricia Bartholomew

    2016-11-01

    Full Text Available Aim/Purpose: The aim of this paper is to develop a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate departmental productivity that fills the gap in methodological bench-marking tools for overall faculty productivity. Background:\tA disproportionate number of departmental and faculty productivity indices in higher education rely solely on research. Productivity in other areas of faculty workload areas, like teaching and institutional and community service, are either measured separately or ignored all together – even when those activities are institutionally mandated. This does a disservice to those who work in those institutions and skews incentives. Methodology: This paper utilizes a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate depart-mental productivity in five disparate departments (English, Biology, Mathematics, Sociology, and Computer Science common to two universities with differing missions (teaching and service. Findings: The results reveal the bias inherent in relying solely on research as a proxy for overall productivity in institutions that have differing missions. Recommendations for Practitioners: Utilizing better metrics informs higher education administrators, promotes better decision-making, and allows incentives to re-align with desired outcomes. Recommendation for Researchers: This paper recommends combing all aspects of faculty workload into a single benchmark index to better measure departmental productivity. Future Research: Further research into improving this simple index is warranted and would include how to account for quality and other facets of productivity.

  15. Animal Production Research Advances: Editorial Policies

    African Journals Online (AJOL)

    Focus and Scope. Animal production research advances is a peer-review journal established expressly to promote the production of all animal species utilized as food. The journal has an international scope and is intended for professionals in animal production and related sciences. We solicit contributions from animal ...

  16. Evaluation report on research and development of a subsea petroleum production system; Kaitei sekiyu seisan system no kenkyu kaihatsu ni kansuru hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-03-01

    In order to assure stable supply of oil and natural gas resources, and achieve enhancement in ocean development technologies in general, development has been made on the subsea petroleum production system (SBPPS), which is effective in ocean floor petroleum production from oil fields at great depths (300 m or deeper), and can be applicable to continental shelves and continental slopes around Japan. The SBPPS consists of four sub-systems of shafts, pipelines, manifolds, and riser and oil storage, whose basic development targets were established for the total system. The system was given a conceptual design for the total system, and the above four sub-systems were designed according to the conceptual design. The experimenting devices of each system were fabricated on a trial basis while fundamental studies are being made on component technologies, and experiments were performed to verify basic functions of the sub-systems. Developments were made on such operation technologies as the system operation technology, production control technology, safety control technology, and maintenance and repair technology required to operate the SBPPS. On-shore and general off-shore experiments were carried out to verify the functions of the experimenting devices of each system, the comprehensive functions and the operation technology. Comprehensive evaluation was given on the above achievements from the technical, economic and social viewpoints. (NEDO)

  17. Research Mentorship Program (RMP to Enhance the Research Productivity in a Psychiatric Hospital: First Report

    Directory of Open Access Journals (Sweden)

    Zhila Afshar

    2011-12-01

    Full Text Available Background: Despite rapid movement in student research in recent years, there is still little evidence that shows the impact of students' activities on research productivity. In this RMP (Research Mentorship Program, we have tried to create a link between medical students with little experience and the professors in the field of medicine. This research was led by a group of medical students who are highly experienced in research. The aim of this study has been to evaluate the impact of the RMP on research productivity.Methods: The Research Mentorship Program began in July 2009 and the program continued for 6 months. After that initial period, the results were evaluated following another 18 months. Some of the interventions included: introducing the RMP to the students; student meetings of the RMP; meetings with the professors; designing a psychiatric history and mental status examination checklist; and research workshops.Results: In eleven semi years, the research productivity scores were evaluated, including eight semi years before interventions and 3 semi years after it. The results show a significant increase in the research productivity score after the RMP in comparison to the research productivity score before it (P-value=0.047. The mean RPS before the RMP was 16.56±7.30 and the score changed to 28.16±7.94 after the RMP.Conclusions: This study shows that with suitable interventions the student researcher’s have the potential to increase research productivity.

  18. Evaluation of the Relative Citation Ratio, a New National Institutes of Health-Supported Bibliometric Measure of Research Productivity, among Academic Radiation Oncologists.

    Science.gov (United States)

    Rock, Calvin B; Prabhu, Arpan V; Fuller, C David; Thomas, Charles R; Holliday, Emma B

    2018-03-01

    Publication metrics are useful in evaluating academic faculty for awarding grants, recruitment, and promotion. A new metric, the relative citation ratio (RCR), was recently released by the National Institutes of Health (NIH); however, no benchmark data yet exist. We sought to create benchmark data for physician faculty in academic radiation oncology (RO) and analyze correlations associated with increased academic productivity. Citation database searches were performed for all US radiation oncologists affiliated with academic RO programs. Gender, NIH funding, career duration, academic rank, RCR, and weighted RCR were collected for each faculty. RCR and weighted RCR were calculated and compared between each subgroup of interest. RCR percentiles were also created for reference. A total of 1,299 RO physician faculty members from 75 institutions were included in the analysis. Overall, RO physician were very productive and influential with a mean RCR of 1.57 ± 1.53 SD and median RCR (interquartile range) of 1.32 (0.87-1.94). Academic rank, career duration, and NIH funding were associated with increased mean RCR and weighted RCR. Male gender and having a PhD were associated with an increased weighted RCR but not an increased mean RCR. Current academic radiation oncologists have a high mean RCR value relative to the benchmark NIH RCR value of 1. All subgroups analyzed had an RCR value above 1 with professor or chair and previous NIH funding having the highest RCR and weighted RCR values overall. These data may be useful for self-evaluation of ROs as well as evaluation of faculty by institutional and departmental leaders. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  19. Marketing research of organic agricultural products' customers

    Directory of Open Access Journals (Sweden)

    Salai Suzana

    2002-01-01

    Full Text Available The aim of customers' marketing research is to acquire information about the way domestic customers behave towards organic agricultural products. This research focuses the overview of conditions and factors influencing customer behavior in nutrition processes in the EM and in Yugoslavia. The acquired information about changes and directions directly affect the possibilities of getting involved into supply processes as well as the 'transmission' of some directions in customer behavior. Anticipations based, on marketing research deal with changes on customers' level, in consumption, products and other competitors. The results of a part of problems concerning customer behavior in nutrition processes follow below, with an emphasis on organic agricultural products.

  20. Research and development for ethylbenzene production

    Energy Technology Data Exchange (ETDEWEB)

    Xue, Mingwei; Sun, Hongmin; Shen, Zhenhao; Zhang, Bin; Yang, Weimin [SINOPEC Shanghai Research Institute of Petrochemical Technology (China); Huan, Mingyao

    2013-11-01

    Ethylbenzene (EB) is important raw material for the production of styrene. Now, EB is mainly produced by the alkylation of benzene with ethylene catalyzed by zeolite in vapour phase or liquid phase. Shanghai Research Institute of Petrochemical Technology (SRIPT) began to research the catalysts for the production of ethylbenezene in 1993. With near 20 years work, three series of catalysts for the alkylation of benzene with pure ethylene, dilute ethylene and ethanol are in commerical in China. This paper mainly introduced the research and development of SRIPT for the EB production. (orig.)

  1. Transitions in Sustainable Product Design Research

    DEFF Research Database (Denmark)

    Boks, Casper; McAloone, Tim C.

    2009-01-01

    By the early 1990s, sustainable product innovation (or ecodesign, or Design for environment) had gained sufficient critical mass in academic research to be identified as a distinct research area. In the past 15 years, stimulated by a growing environmental concern and awareness in the media...... of transitions; this is illustrated by discussing characteristic aspects of each transition, which together provide a historic account of how academic research into sustainable product innovation had matured. In conclusion, a number of possible future transitions or extensions of the research area are discussed......., this research area has expanded considerably; from a bunch of opportunistic eco-pathfinders trying to make products better recyclable into acknowledged scientific research regarding technology transfer and commercialisation. This paper proposes that this maturing process took place through a number...

  2. Evaluation report on research and development of an ultra high performance laser applied composite production system. Achievement report; Chokoseino laser oyo fukugo seisan system no kenkyu kaihatsu ni kansuru hyoka hokokusho. Seika hokokuhen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-08-01

    Research, development, and evaluation were made on a composite production system applicable to manufacture products of a large number of types in small quantities. In the research and development of a total system, verification works were carried out by studying basic designs, operation of the composite production system, and experiment plant operation. Research and development on cutting and processing technologies included studies on composite cutting mechanisms, general purpose fitting technologies, control systems, and drive systems. In the research and development of laser applied technologies, studies were performed on large output laser oscillators, the control thereof, and laser processing technologies. In the research and development of automatic diagnosis technologies, studies were executed on failure diagnosis, accuracy compensation, automatic inspection, and accuracy diagnostic technologies. In the research and development of design and control technologies, studies were carried out on automatic designing, process designing, and process controlling technologies. In the study of operation of the Tsukuba experiment plant, discussions were given on configuration of the experiment plant, laser processing mechanism, composite assembly mechanism, production inspection mechanism, and system operation. Furthermore, design studies were also carried out on practically usable systems. (NEDO)

  3. Evaluating Research Excellence : Main Debates

    International Development Research Centre (IDRC) Digital Library (Canada)

    Corey Piccioni

    The International Development Research Centre (IDRC), through its ... forms of research impact: changes in access to research; changes in the extent to which re- ... The London School of Economics (LSE), through their Impact of Social ...

  4. Fish product quality evaluation based on temperature monitoring in ...

    African Journals Online (AJOL)

    As one kind of perishable food, fish product is at risk of suffering various damages during cold chain and temperature is the most important factor to affect the product quality. This research work on frozen tilapia fillet was aimed at evaluating the fish product quality and predict shelf-life through monitoring temperature change ...

  5. Farming Systems Involving Fruit Crops Production And Research In ...

    African Journals Online (AJOL)

    Research interventions to expand the scope of the farmers have shown that greater efficiency of land utilization is exhibited. New areas of research for the evaluation, as well as suggests consideration for intercropping with fruit trees are suggested. The current challenges to fruit production were also identified, while the ...

  6. Wood products research in the USA

    Science.gov (United States)

    Theodore Wegner

    2010-01-01

    Forest biomass conversion to biofuels and other value-added co-products; hyper-performance advanced composites custom tailored to end use requirements; advanced high performance wood-based structures; and nanomaterials and nano-enable high performance products from wood represent important research and development investment areas for the successful transformation of...

  7. Process-Product Research: A Cornerstone in Educational Effectiveness Research

    Science.gov (United States)

    Creemers, Bert; Kyriakides, Leonidas

    2015-01-01

    This article links the contribution of process-product studies in developing the theoretical framework of educational effectiveness by pointing out the importance of teacher behavior in the classroom. The role that Jere Brophy played in this evolving research is described within the various phases of teacher effectiveness research. Process-product…

  8. Biomass production and basic research on photosynthesis

    International Nuclear Information System (INIS)

    Broda, E.

    1979-01-01

    This document is a report of the conference: research and development work in Austria, organized by Austrian ministry of science and research, the ASSA and the OMV-stock company in 1979, which took place in Vienna. The text is about the different possible forms of solar energy utilization. Broda analyses in detail the utilization and production of biomass. (nowak)

  9. Research Productivity: Some Paths Less Travelled

    Science.gov (United States)

    Martin, Brian

    2009-01-01

    Conventional approaches for fostering research productivity, such as recruitment and incentives, do relatively little to develop latent capacities in researchers. Six promising unorthodox approaches are the promotion of regular writing, tools for creativity, good luck, happiness, good health and crowd wisdom. These options challenge conventional…

  10. Research to Action: an evaluation.

    Science.gov (United States)

    Murphy, Gail Tomblin; Alder, Rob; MacKenzie, Adrian; Cook, Amanda; Maddalena, Victor

    2012-03-01

    The evaluation of the Research to Action project was conducted using an Outcome Mapping (OM) methodology (Earl et al. 2001) with a mixed-methods, repeat survey (before/after) study design. This design uses concurrent measurement of process and outcome indicators at baseline and follow-up. The RTA project proved effective at improving work environments and thereby promoting the retention and recruitment of nurses. Nurses involved in the RTA initiatives had a higher perception of leadership and support in their units, improved job satisfaction, increased empowerment and occupational commitment, and a greater intention to stay on the job.The pilot projects were most successful when there were clearly stated objectives, buy-in from nurses, support from the steering committee and management, and adequate communication among stakeholders. Committed coordination and leadership, both locally and nationally, were central to success.Considerable evidence has documented the challenges facing Canada's nursing human resources and their workplaces, such as high levels of turnover, excessive use of overtime and persistent shortages. There is a growing imperative to translate this research into action, and much of the available evidence presents viable policy alternatives for consideration. For example, a recent national synthesis report (Maddalena and Crupi 2008) recommended that, in consultation with stakeholders, processes should be put in place to share knowledge and best practices in nursing management, practice, staffing models and innovations in workplace health and well-being.Nurses across the country report a desire to be more involved in decisions affecting them and their patients (Wortsman and Janowitz 2006). A recent study on the shortage of registered nurses in Canada (Tomblin Murphy et al. 2009) highlighted the need for collaboration among governments, employers, unions and other stakeholders to improve working conditions for nurses. Another report notes the

  11. Evaluating the production of Ganoderma mushroom on corn cobs

    African Journals Online (AJOL)

    SAM

    2014-05-28

    May 28, 2014 ... Full Length Research Paper. Evaluating the production ... Key words: Ganoderma, corn cobs, substrate, mushrooms, sawdust, basidiocarp. INTRODUCTION .... those which have high lignin and low cellulose. This is because ...

  12. Applying environmental product design to biomedical products research.

    Science.gov (United States)

    Messelbeck, J; Sutherland, L

    2000-12-01

    The principal themes for the Biomedical Research and the Environment Conference Committee on Environmental Economics in Biomedical Research include the following: healthcare delivery companies and biomedical research organizations, both nonprofit and for-profit, need to improve their environmental performance; suppliers of healthcare products will be called upon to support this need; and improving the environmental profile of healthcare products begins in research and development (R&D). The committee report begins with requirements from regulatory authorities (e.g., U.S. Environmental Protection Agency [EPA], the U.S. Food and Drug Administration), and the healthcare delivery sector). The 1998 American Hospital Association and EPA Memorandum of Understanding to reduce solid waste and mercury from healthcare facilities is emblematic of these requirements. The dominant message from the requirements discussion is to ensure that R&D organizations do not ignore customer, environmental, and regulatory requirements in the early stages of product development. Several representatives from healthcare products manufacturers presented their companies' approaches to meeting these requirements. They reported on efforts to ensure that their R&D processes are sensitive to the environmental consequences from manufacturing, distributing, using, and disposing of healthcare products. These reports describe representatives' awareness of requirements and the unique approaches their R&D organizations have taken to meet these requirements. All representatives reported that their R&D organizations have embraced environmental product design because it avoids the potential of returning products to R&D to improve the environmental profile. Additionally, several reports detailed cost savings, sustainability benefits, and improvements in environmental manufacturing or redesign, and increased customer satisfaction. Many companies in healthcare delivery are working to improve environmental

  13. Validation of Land Cover Products Using Reliability Evaluation Methods

    Directory of Open Access Journals (Sweden)

    Wenzhong Shi

    2015-06-01

    Full Text Available Validation of land cover products is a fundamental task prior to data applications. Current validation schemes and methods are, however, suited only for assessing classification accuracy and disregard the reliability of land cover products. The reliability evaluation of land cover products should be undertaken to provide reliable land cover information. In addition, the lack of high-quality reference data often constrains validation and affects the reliability results of land cover products. This study proposes a validation schema to evaluate the reliability of land cover products, including two methods, namely, result reliability evaluation and process reliability evaluation. Result reliability evaluation computes the reliability of land cover products using seven reliability indicators. Process reliability evaluation analyzes the reliability propagation in the data production process to obtain the reliability of land cover products. Fuzzy fault tree analysis is introduced and improved in the reliability analysis of a data production process. Research results show that the proposed reliability evaluation scheme is reasonable and can be applied to validate land cover products. Through the analysis of the seven indicators of result reliability evaluation, more information on land cover can be obtained for strategic decision-making and planning, compared with traditional accuracy assessment methods. Process reliability evaluation without the need for reference data can facilitate the validation and reflect the change trends of reliabilities to some extent.

  14. Product evaluation phase 1 report

    International Nuclear Information System (INIS)

    Kearsey, H.A.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of irradiated nuclear fuel at BNFL Sellafield. HEPA filters are used on all THORP ventilation streams to prevent egress of active and potentially active particulate matter from the plant. Headings are: general information (origin and future arisings); characteristics of the waste stream; initial evaluation of encapsulation options - evaluation of potential matrices for encapsulation of waste in form suitable for disposal; waste simulation (U.K.)

  15. Product evaluation phase I report

    International Nuclear Information System (INIS)

    Kearsey, H.A.; Cumming, I.W.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of irradiated nuclear fuel at BNFL Sellafield. Headings are: introduction (origin of wastes -the THORP dissolver liquor is clarified by centrifugation before passing to the solvent extraction plant; current stocks and future arisings); characteristics of the waste stream; (colloids in the form of cake); initial evaluation of encapsulation options -evaluation of potential matrices for solidification of waste in form suitable for disposal; waste simulation. (U.K.)

  16. Product evaluation phase 1 report

    International Nuclear Information System (INIS)

    Kearsey, H.A.; Page, R.J.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of irradiated nuclear fuel at BNFL Sellafield. The graphite waste arises from the reprocessing of CAGR fuel assemblies. Headings are: introduction (origin of waste; future arisings); waste characterisation; initial evaluation of encapsulation options - evaluation of potential matrices for encapsulation of waste in form suitable for disposal; waste simulation; relevance to other phase II studies. (UK)

  17. Research Award: Policy and Evaluation

    International Development Research Centre (IDRC) Digital Library (Canada)

    Office 2004 Test Drive User

    holders to pursue their research goals and work in one of IDRC's dynamic program or division ... strategic scanning and analysis, advances the relationship between IDRC and the federal ... Strong communication and interpersonal skills; and.

  18. Product evaluation phase 1 report

    International Nuclear Information System (INIS)

    Kearsey, H.A.; Page, R.J.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of irradiated nuclear fuel at BNFL Sellafield. The waste arises from the reprocessing of CAGR fuel assemblies, which consist of fuel pins held inside a graphite sleeve by means of stainless steel support grids and braces. Headings are: introduction (origin of waste and future arisings); waste characterisation; initial evaluation of encapsulation options - evaluation of potential matrices for encapsulation of waste in form suitable for disposal; waste simulation; relevance of other phase II studies. (U.K.)

  19. Quality and Research Evaluation in Organizations

    DEFF Research Database (Denmark)

    Hansson, Finn

    A central issue in science policy today is the changing role and function ofresearch evaluation. How is quality selected, has local organizational traditionsand managerial practices influence on the research evaluation? Who isperceived as peers or evaluators by the researchers and by managers...

  20. Product evaluation phase 1 report

    International Nuclear Information System (INIS)

    Fairhall, G.A.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of irradiated nuclear fuel at BNFL Sellafield. Headings are: introduction (origin of waste; current stocks and future arisings); characterisation of sludges; initial evaluation of potential matrices (for solidification of waste in form suitable for disposal); waste simulation. (U.K.)

  1. User Experience Evaluation Methods in Product Development (UXEM'09)

    Science.gov (United States)

    Roto, Virpi; Väänänen-Vainio-Mattila, Kaisa; Law, Effie; Vermeeren, Arnold

    High quality user experience (UX) has become a central competitive factor of product development in mature consumer markets [1]. Although the term UX originated from industry and is a widely used term also in academia, the tools for managing UX in product development are still inadequate. A prerequisite for designing delightful UX in an industrial setting is to understand both the requirements tied to the pragmatic level of functionality and interaction and the requirements pertaining to the hedonic level of personal human needs, which motivate product use [2]. Understanding these requirements helps managers set UX targets for product development. The next phase in a good user-centered design process is to iteratively design and evaluate prototypes [3]. Evaluation is critical for systematically improving UX. In many approaches to UX, evaluation basically needs to be postponed until the product is fully or at least almost fully functional. However, in an industrial setting, it is very expensive to find the UX failures only at this phase of product development. Thus, product development managers and developers have a strong need to conduct UX evaluation as early as possible, well before all the parts affecting the holistic experience are available. Different types of products require evaluation on different granularity and maturity levels of a prototype. For example, due to its multi-user characteristic, a community service or an enterprise resource planning system requires a broader scope of UX evaluation than a microwave oven or a word processor that is meant for a single user at a time. Before systematic UX evaluation can be taken into practice, practical, lightweight UX evaluation methods suitable for different types of products and different phases of product readiness are needed. A considerable amount of UX research is still about the conceptual frameworks and models for user experience [4]. Besides, applying existing usability evaluation methods (UEMs) without

  2. Measuring the productivity of university research reactors

    International Nuclear Information System (INIS)

    Voth, M.H.

    1989-01-01

    University Research Reactors (URRs) on 33 campuses in the United States provide valuable contributions to academic instruction and research programs. In most cases, there are no alternative diagnostic techniques to supplant the need for a reactor and associated facilities. Since URRs constitute a major financial commitment, it is important that they be operated in a productive manner. Productivity may be defined as the sum of new knowledge generated, existing knowledge transferred to others, and analytical services provided to assist in the generation of new knowledge; another definition of productivity is this sum expressed as a function of the cost incurred. In either case, a consistent measurement is difficult and more qualitative than quantitative. A uniform reporting system has been proposed that defines simplified categories through which meaningful comparisons can be performed

  3. Product evaluation phase 1 report

    International Nuclear Information System (INIS)

    Kearsey, H.A.; Cumming, I.W.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of irradiated nuclear fuel at BNFL Sellafield. The waste arises during the storage, in multi-element bottles (MEB), and removed of LWR fuel elements in Sellafield feed ponds, in the form of crud and filter-aid. Headings are: introduction (origin of waste; current stocks and future arisings); waste characterisation; initial evaluation of potential matrices for encapsulation of waste in form suitable for disposal; waste simulation. (U.K.)

  4. Product evaluation phase 1 report

    International Nuclear Information System (INIS)

    Fairhall, G.A.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of magnox-clad fuel at BNFL Sellafield. The magnox swarf, with its associated debris, retrieved from previous operations has corroded to a sludge. Headings are: introduction (origin, current stocks and future arisings); waste characterisation; initial evaluation of potential matrices for solidification of waste in form suitable for disposal; waste simulation. (U.K.)

  5. Evaluating societal relevance of research

    NARCIS (Netherlands)

    Wilbertz, Johannes

    2013-01-01

    Scientific research is performed to elucidate how the world around us is functioning. One dimension of the acquired knowledge is that it can be used to develop various sectors of society such as industry, education, governmental practices, the health system or social cohesion. A main characteristic

  6. HOW TO EVALUATE SCIENTIFIC PRODUCTION

    OpenAIRE

    Antunes, Alberto Azoubel

    2015-01-01

    Objective: To conduct a critical analysis of the two main bibliometric indexes used by science: the impact factor and the H index. Method: Research was conducted on PubMed using the keywords: impact factor, Bibliometrics and H index. Results: The citations of articles tend to follow a curve in which the articles published in a given year increase sharply to a peak occurring between two and six years after its publication. From this peak citations decline over time. Conclusion: The analysis...

  7. Development of a research evaluation protocol for NSD research portfolios

    International Nuclear Information System (INIS)

    Gould, J.

    1999-01-01

    This report is concerned with developing and describing a research evaluation protocol for use by the Nuclear Safety Directorate (NSD), in evaluating their various programmes of research; or aspects of those programmes. The Health and Safety Executive (HSE) has been involved with research evaluation for some considerable time and NSD, as part of HSE, wishes to develop a protocol which, while it meets their needs, is also fully compatible with other HSE approaches. It is intended that the methodology developed by this project will be used for evaluation of the Probabilistic Safety Assessment Portfolio (as a separate project). The usefulness of the methodology will be reviewed in the light of this experience

  8. Visual soil evaluation - future research requirements

    Science.gov (United States)

    Emmet-Booth, Jeremy; Forristal, Dermot; Fenton, Owen; Ball, Bruce; Holden, Nick

    2017-04-01

    A review of Visual Soil Evaluation (VSE) techniques (Emmet-Booth et al., 2016) highlighted their established utility for soil quality assessment, though some limitations were identified; (1) The examination of aggregate size, visible intra-porosity and shape forms a key assessment criterion in almost all methods, thus limiting evaluation to structural form. The addition of criteria that holistically examine structure may be desirable. For example, structural stability can be indicated using dispersion tests or examining soil surface crusting, while the assessment of soil colour may indirectly indicate soil organic matter content, a contributor to stability. Organic matter assessment may also indicate structural resilience, along with rooting, earthworm numbers or shrinkage cracking. (2) Soil texture may influence results or impeded method deployment. Modification of procedures to account for extreme texture variation is desirable. For example, evidence of compaction in sandy or single grain soils greatly differs to that in clayey soils. Some procedures incorporate separate classification systems or adjust deployment based on texture. (3) Research into impacts of soil moisture content on VSE evaluation criteria is required. Criteria such as rupture resistance and shape may be affected by moisture content. It is generally recommended that methods are deployed on moist soils and quantification of influences of moisture variation on results is necessary. (4) Robust sampling strategies for method deployment are required. Dealing with spatial variation differs between methods, but where methods can be deployed over large areas, clear instruction on sampling is required. Additionally, as emphasis has been placed on the agricultural production of soil, so the ability of VSE for exploring structural quality in terms of carbon storage, water purification and biodiversity support also requires research. References Emmet-Booth, J.P., Forristal. P.D., Fenton, O., Ball, B

  9. 77 FR 26583 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Cooperative...

    Science.gov (United States)

    2012-05-04

    ... Production Act of 1993--Cooperative Research Group on Evaluation of Distributed Leak Detection Systems... Institute-- Cooperative Research Group on Evaluation of Distributed Leak Detection Systems--Performance... detection systems for offshore pipelines. Laboratory testing of distributed temperature and distributed...

  10. Evaluating an artifact in design science research

    CSIR Research Space (South Africa)

    Herselman, M

    2015-09-01

    Full Text Available In this paper, we describe the iterative evaluation of an artifact developed through the application of Design Science Research (DSR) methodology in a resource constrained environment. In the DSR process the aspect of evaluation is often done...

  11. Product evaluation phase 1 report

    International Nuclear Information System (INIS)

    Kearsey, H.A.; Hornby, J.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of irradiated nuclear fuel at BNFL Sellafield. The waste arises from the reprocessing of uranium from overseas PWR type reactors and is the solid dissolver waste remaining after the fuel has been extracted. Headings are: general introduction (origin, current stocks and future arisings); characteristics of the waste stream; alternative matrices - evaluation of potential matrices for encapsulation of waste in form suitable for disposal; waste simulation; relevance of other phase II studies. (U.K.)

  12. Product evaluation phase 1 report

    International Nuclear Information System (INIS)

    Kearsey, H.A.; Hornby, J.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of irradiated nuclear fuel at BNFL Sellafield. The waste arises from the reprocessing of uranium from overseas BWR type reactors and is the solid dissolver waste remaining after the fuel has been extracted. Headings are: general introduction (origin, current stocks and future arisings); characteristics of the waste stream; alternative matrices - evaluation of potential matrices for encapsulation of waste in form suitable for disposal; waste simulation; relevance of other phase II studies. (U.K.)

  13. Product evaluation phase 1 report

    International Nuclear Information System (INIS)

    Fairhall, G.A.

    1984-01-01

    This report concerns the intermediate-level radioactive waste arisings from the reprocessing of irradiated nuclear fuel at BNFL Sellafield. The site ion exchange effluent plant will remove Cs and Sr from active liquid effluents using Mud Hills clinoptilolite. Approximately 40 to 50 m 3 of spent ion exchanger will be generated each year together with 7.5 m 3 of filter sand. Headings are: introduction; characterisation; initial evaluation of potential matrices for encapsulation of waste in form suitable for disposal; waste simulation. (U.K.)

  14. Teaching and Evaluating Research Skills

    OpenAIRE

    von Eije, Johan; Jaklofsky, Tanja

    2015-01-01

    We present a method to analyze the relation between faculty wide intended learning and concomitant achieved learning outcomes empirically. The method is applied to the Master of Science in Business Administration (MSc BA) program of the Faculty of Economics and Business (FEB) of the University of Groningen. Intended learning is measured from the students’ exposure to seven research aspects taught according to course specific learning goals. The achieved learning outcomes are derived from the ...

  15. Can legal research benefit from evaluation studies?

    Directory of Open Access Journals (Sweden)

    Frans L. Leeuw

    2011-01-01

    Full Text Available The article describes what evaluation studies have to offer to legal research. Several cases and types of evaluations are presented, in relation to legal or semi-legal questions. Also, a short overview of the contemporary history of evaluation studies is presented. Finally, it will address the question of how to ensure that in legal research and in legal training attention is paid to theories, designs and methods of evaluation studies.

  16. VIIRS Product Evaluation at the Ocean PEATE

    Science.gov (United States)

    Patt, Frederick S.; Feldman, Gene C.

    2010-01-01

    The National Polar-orbiting Operational Environmental Satellite System (NPOESS) Preparatory Project (NPP) mission will support the continuation of climate records generated from NASA missions. The NASA Science Data Segment (SDS) relies upon discipline-specific centers of expertise to evaluate the NPP data products for suitability as climate data records, The Ocean Product Evaluation and Analysis Tool Element (PEATE) will build upon Well established NASA capabilities within the Ocean Color program in order to evaluate the NPP Visible and Infrared Imager/Radiometer Suite (VIIRS) Ocean Color and Chlorophyll data products. The specific evaluation methods will support not only the evaluation of product quality but also the sources of differences with existing data records.

  17. Solar Thermochemical Hydrogen Production Research (STCH)

    Energy Technology Data Exchange (ETDEWEB)

    Perret, Robert [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2011-05-01

    Eight cycles in a coordinated set of projects for Solar Thermochemical Cycles for Hydrogen production (STCH) were self-evaluated for the DOE-EERE Fuel Cell Technologies Program at a Working Group Meeting on October 8 and 9, 2008. This document reports the initial selection process for development investment in STCH projects, the evaluation process meant to reduce the number of projects as a means to focus resources on development of a few most-likely-to-succeed efforts, the obstacles encountered in project inventory reduction and the outcomes of the evaluation process. Summary technical status of the projects under evaluation is reported and recommendations identified to improve future project planning and selection activities.

  18. Production, consumption and research on solar energy

    DEFF Research Database (Denmark)

    Sanz-Casado, Elias; Lascurain-Sánchez, Maria Luisa; Serrano-Lopez, Antonio Eleazar

    2014-01-01

    An analysis of scientific publications on solar energy was conducted to determine whether public interest in the subject is mirrored by more intense research in the area. To this end, the research published by Spain and Germany, the two EU countries with the highest installed photovoltaic capacity......, was analyzed based on Web of Science data. The results show that: solar output has risen substantially; solar research has a greater impact (measured in terms of citations) than publications on other renewables such as wind power; scientific production on solar energy is high in Germany and Spain, which...... intense. The main conclusion is the divergence in Germany and Spain between solar energy demand/output growth, being exponential, and the growth of research papers on the subject, which is linear...

  19. Profile and scientific production of CNPq researchers in cardiology.

    Science.gov (United States)

    Oliveira, Eduardo Araujo de; Ribeiro, Antonio Luiz Pinho; Quirino, Isabel Gomes; Oliveira, Maria Christina Lopes; Martelli, Daniella Reis; Lima, Leonardo Santos; Colosimo, Enrico Antonio; Lopes, Thais Junqueira; Silva, Ana Cristina Simões; Martelli, Hercílio

    2011-09-01

    Systematic assessments of the scientific production can optimize resource allocation and increase research productivity in Brazil. The aim of this study was to evaluate the profile and scientific production of researchers in the field of Cardiology who have fellowship in Medicine provided by the Conselho Nacional de Desenvolvimento Científico e Tecnológico. The curriculum Lattes of 33 researchers with active fellowships from 2006 to 2008 were included in the analysis. The variables of interest were: gender, affiliation, tutoring of undergraduate, masters and PhD students, and scientific production and its impact. : There was predominance of males (72.7%) and of fellowship level 2 (56.4%). Three states of the Federation were responsible for 94% of the researchers: SP (28; 71.8%), RS (4; 10.3%), e RJ (3; 9.1%). Four institutions are responsible for about 82% of researchers: USP (13; 39.4%), UNESP (5; 15.2%), UFRGS (4; 12.1%) e UNIFESP (3; 9.1%). During all academic careers, the researchers published 2.958 journal articles, with a mean of 89 articles per researcher. Of total, 55% and 75% were indexed at Web of Science and Scopus databases, respectively. The researchers received a total of 19648 citations at the database Web of Science, with a median of 330 citations per researcher (IQ = 198-706). The average number of citations per article was 13.5 citations (SD = 11.6). Our study has shown that researchers in the field of cardiology have a relevant scientific production. The knowledge of the profile of researchers in the field of Cardiology will probably enable effective strategies to qualitatively improve the scientific output of Brazilian researchers.

  20. FY 2000 report on the research cooperation project - Research cooperation in developmental support for oil producing countries. Production of catalyst and development of the evaluation technology in Kuwait; 2000 nendo san'yukoku kaihatsu shien kenkyu kyoryoku jigyo seika hokokusho. Kuuweto ni okeru shokubai seizo oyobi hyoka gijutsu no kaihatsu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-09-01

    For the purpose of strengthening the economic infrastructure of Kuwait and also strengthening the relation between Japan and Kuwait by bringing up the catalyst production industry in Kuwait as one of the key industries, the research cooperation was made with Kuwait Catalyst Co. (KCC). In this research cooperation project, the following were conducted: survey of the catalyst production environment in Kuwait, survey of the actual condition of oil factories in Kuwait and the Middle East, trial production of the catalyst to meet the needs of Kuwait, evaluation of the catalyst suitable for oil factories in Kuwait and the Middle East and evaluation of the application conditions, development of technology for production/evaluation/application of the catalyst to meet the needs of Kuwait, etc. As to the trial catalyst production at KCC, the trial products for heavy oil desulfurization and light oil desulfurization stood comparison with the catalysts produced in Japan. KCC started trial operation in fall 2000, and the commercial production is smoothly continuing. In September 2001, the catalyst for heavy oil desulfurizer of KNPC, user, was delivered. The delivery to other users was also planned to be made. (NEDO)

  1. Research and Evaluation in Medical Education

    Science.gov (United States)

    Ferris, Helena A.; Collins, Mary E.

    2015-01-01

    The landscape of medical education is continuously evolving, as are the needs of the learner. The appropriate use of research and evaluation is key when assessing the need for change and instituting one's innovative endeavours. This paper demonstrates how research seeks to generate new knowledge, whereas evaluation uses information acquired from…

  2. The IAEA co-ordinated research programme on improvement of measurements, theoretical computations and evaluations of neutron induced helium production cross sections. Status report. Prepared at the final CRP meeting in Sendai, Japan 25-29 September 1995

    International Nuclear Information System (INIS)

    Pashchenko, A.B.

    1996-12-01

    The present report describes the results of the IAEA Co-ordinated Research Programme (CRP) on ''Improvements of Measurements, Theoretical Computation and Evaluations of Neutron Induced Helium Production Cross Sections''. Summarized is the progress achieved under the CRP in the following areas: measurements of α-production cross sections for structural materials, theoretical computations at (nα) cross sections; measurements of activation cross sections; and improvement of experimental methods for (n,α) investigations. The status report gives also short summaries on the work of each laboratory which contributed to the results of the CRP. Attached is the list of program members and participants of CRP meetings. (author). Refs, 2 figs, 1 tab

  3. Collaboration networks and research productivity at IPEN

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Carlos Anisio; Barroso, Antonio Carlos de Oliveira, E-mail: monteiro@ipen.br, E-mail: barroso@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2015-07-01

    In this article, we investigate the IPEN's scientific collaboration network. Based on publications registered in IPEN's technical and scientific database was extracted a set of authors that developed technical and scientific work on the 2001 to 2010 period, using coauthorship to define the relationship between authors. From the data collected, we used degree centrality indicator in conjunction with two approaches to assess the relationship between collaboration and productivity: normal count, where for each publication that the author appears is added one for the author’s productivity indicator, and fractional count which is added a fractional value according to the total number of publication's authors. We concluded that collaboration for the development of a technical and scientific work has a positive correlation with the researchers productivity, that is, the greater the collaboration greater the productivity. We presented, also, a statistical summary to reveal the total number of publications and the number of IPEN's authors by publication, the average number of IPEN's authors per publication and the average number of publications by IPEN's author, the number of IPEN's authors that not published with no other author of the IPEN and, finally, the number of active and inactive (ex. retirees) researchers of the IPEN, as well as, the number of authors who do not have employment contract with the IPEN. (author)

  4. Collaboration networks and research productivity at IPEN

    International Nuclear Information System (INIS)

    Monteiro, Carlos Anisio; Barroso, Antonio Carlos de Oliveira

    2015-01-01

    In this article, we investigate the IPEN's scientific collaboration network. Based on publications registered in IPEN's technical and scientific database was extracted a set of authors that developed technical and scientific work on the 2001 to 2010 period, using coauthorship to define the relationship between authors. From the data collected, we used degree centrality indicator in conjunction with two approaches to assess the relationship between collaboration and productivity: normal count, where for each publication that the author appears is added one for the author’s productivity indicator, and fractional count which is added a fractional value according to the total number of publication's authors. We concluded that collaboration for the development of a technical and scientific work has a positive correlation with the researchers productivity, that is, the greater the collaboration greater the productivity. We presented, also, a statistical summary to reveal the total number of publications and the number of IPEN's authors by publication, the average number of IPEN's authors per publication and the average number of publications by IPEN's author, the number of IPEN's authors that not published with no other author of the IPEN and, finally, the number of active and inactive (ex. retirees) researchers of the IPEN, as well as, the number of authors who do not have employment contract with the IPEN. (author)

  5. Expected energy production evaluation for photovoltaic systems

    DEFF Research Database (Denmark)

    Ding, Yi; Østergaard, Jacob; Peng, Wang

    2011-01-01

    A photovoltaic (PV) system consists of many solar panels, which are connected in series, parallel or a combination of both. Energy production for the PV system with various configurations is different. In this paper, a methodology is developed to evaluate and analyze the expected energy production...

  6. Scenario evaluation of open pond microalgae production

    NARCIS (Netherlands)

    Slegers, P.M.; Lösing, M.B.; Wijffels, R.H.; Straten, van G.; Boxtel, van A.J.B.

    2013-01-01

    To evaluate microalgae production in large scale open ponds under different climatologic conditions, a model-based framework is used to study the effect of light conditions, water temperature and reactor design on trends in algae productivity. Scenario analyses have been done for two algae species

  7. Science dynamics and research production indicators, indexes, statistical laws and mathematical models

    CERN Document Server

    Vitanov, Nikolay K

    2016-01-01

    This book deals with methods to evaluate scientific productivity. In the book statistical methods, deterministic and stochastic models and numerous indexes are discussed that will help the reader to understand the nonlinear science dynamics and to be able to develop or construct systems for appropriate evaluation of research productivity and management of research groups and organizations. The dynamics of science structures and systems is complex, and the evaluation of research productivity requires a combination of qualitative and quantitative methods and measures. The book has three parts. The first part is devoted to mathematical models describing the importance of science for economic growth and systems for the evaluation of research organizations of different size. The second part contains descriptions and discussions of numerous indexes for the evaluation of the productivity of researchers and groups of researchers of different size (up to the comparison of research productivities of research communiti...

  8. A Holistic Approach to Evaluating Research

    International Development Research Centre (IDRC) Digital Library (Canada)

    production are demonstrating that the traditional view that science ... the two are entangled. .... Produces multi-, inter- or transdisciplinary research, sometimes across disparate fields. ..... provocative, color coding (“traffic lights”) may serve as a.

  9. Content validity--establishing and reporting the evidence in newly developed patient-reported outcomes (PRO) instruments for medical product evaluation: ISPOR PRO good research practices task force report: part 1--eliciting concepts for a new PRO instrument.

    Science.gov (United States)

    Patrick, Donald L; Burke, Laurie B; Gwaltney, Chad J; Leidy, Nancy Kline; Martin, Mona L; Molsen, Elizabeth; Ring, Lena

    2011-12-01

    The importance of content validity in developing patient reported outcomes (PRO) instruments is stressed by both the US Food and Drug Administration and the European Medicines Agency. Content validity is the extent to which an instrument measures the important aspects of concepts that developers or users purport it to assess. A PRO instrument measures the concepts most significant and relevant to a patient's condition and its treatment. For PRO instruments, items and domains as reflected in the scores of an instrument should be important to the target population and comprehensive with respect to patient concerns. Documentation of target population input in item generation, as well as evaluation of patient understanding through cognitive interviewing, can provide the evidence for content validity. Developing content for, and assessing respondent understanding of, newly developed PRO instruments for medical product evaluation will be discussed in this two-part ISPOR PRO Good Research Practices Task Force Report. Topics include the methods for generating items, documenting item development, coding of qualitative data from item generation, cognitive interviewing, and tracking item development through the various stages of research and preparing this tracking for submission to regulatory agencies. Part 1 covers elicitation of key concepts using qualitative focus groups and/or interviews to inform content and structure of a new PRO instrument. Part 2 covers the instrument development process, the assessment of patient understanding of the draft instrument using cognitive interviews and steps for instrument revision. The two parts are meant to be read together. They are intended to offer suggestions for good practices in planning, executing, and documenting qualitative studies that are used to support the content validity of PRO instruments to be used in medical product evaluation. Copyright © 2011 International Society for Pharmacoeconomics and Outcomes Research (ISPOR

  10. Innovative technology transfer of nondestructive evaluation research

    Science.gov (United States)

    Brian Brashaw; Robert J. Ross; Xiping Wang

    2008-01-01

    Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

  11. Commentary: Writing and evaluating qualitative research reports

    Science.gov (United States)

    An overview of qualitative methods is provided, particularly for reviewers and authors who may be less familiar with qualitative research. A question and answer format is used to address considerations for writing and evaluating qualitative research. When producing qualitative research, individuals ...

  12. Research evaluation support services in biomedical libraries

    Directory of Open Access Journals (Sweden)

    Karen Elizabeth Gutzman

    2018-01-01

    Conclusions: Libraries can leverage a variety of evaluation support services as an opportunity to successfully meet an array of challenges confronting the biomedical research community, including robust efforts to report and demonstrate tangible and meaningful outcomes of biomedical research and clinical care. These services represent a transformative direction that can be emulated by other biomedical and research libraries.

  13. Productivity costs in economic evaluations: past, present, future.

    Science.gov (United States)

    Krol, Marieke; Brouwer, Werner; Rutten, Frans

    2013-07-01

    Productivity costs occur when the productivity of individuals is affected by illness, treatment, disability or premature death. The objective of this paper was to review past and current developments related to the inclusion, identification, measurement and valuation of productivity costs in economic evaluations. The main debates in the theory and practice of economic evaluations of health technologies described in this review have centred on the questions of whether and how to include productivity costs, especially productivity costs related to paid work. The past few decades have seen important progress in this area. There are important sources of productivity costs other than absenteeism (e.g. presenteeism and multiplier effects in co-workers), but their exact influence on costs remains unclear. Different measurement instruments have been developed over the years, but which instrument provides the most accurate estimates has not been established. Several valuation approaches have been proposed. While empirical research suggests that productivity costs are best included in the cost side of the cost-effectiveness ratio, the jury is still out regarding whether the human capital approach or the friction cost approach is the most appropriate valuation method to do so. Despite the progress and the substantial amount of scientific research, a consensus has not been reached on either the inclusion of productivity costs in economic evaluations or the methods used to produce productivity cost estimates. Such a lack of consensus has likely contributed to ignoring productivity costs in actual economic evaluations and is reflected in variations in national health economic guidelines. Further research is needed to lessen the controversy regarding the estimation of health-related productivity costs. More standardization would increase the comparability and credibility of economic evaluations taking a societal perspective.

  14. An evaluation of rural health care research.

    Science.gov (United States)

    Kane, R; Dean, M; Solomon, M

    1979-05-01

    Reviews the state of the art of rural health research and evaluation in the U.S. with particular emphasis on the questions of access, health personnel, and financing. The current state of knowledge both in the published and unpublished literature in each area is summarized and a series of unresolved issues is proposed. A strategy for further research to include the various types of rural health care programs is described. Major findings suggest that, although rural populations do have somewhat less access to care than do urban populations, our ability to quantify precisely the extent and importance of this discrepancy is underdeveloped. Despite a substantial investment in a variety of rural health care programs there is inadequate information as to their effectiveness. Programs designed to increase the supply of health personnel to rural areas have met with mixed success. Sites staffed by National Health Service Corps personnel show consistently lower productivity than do sites under other sponsorship. Nonphysician personnel (physician assistants and nurse practitioners) offer a promising source of primary care for rural areas: recent legislation that reimburses such care should increase their utilization. A persistent problem is the expectation (often a mandate) incorporated into many rural health care demonstration efforts that the programs become financially self-sufficient in a finite period of time. Self-sufficiency is a function of utilization, productivity, and the ability to recover charges for services. In many instances stringent enforcement of the self-sufficiency requirement may mean those who need services most will be least likely to receive them.

  15. Evaluating the "Evaluative State": Implications for Research in Higher Education.

    Science.gov (United States)

    Dill, David D.

    1998-01-01

    Examines the "evaluative state" that is, public management-based evaluation systems--in the context of experiences in the United Kingdom and New Zealand, and suggests that further research is needed to examine problems in the evaluative state itself, in how market competition impacts upon it, and how academic oligarchies influence the…

  16. [Evaluation of arguments in research reports].

    Science.gov (United States)

    Botes, A

    1999-06-01

    Some authors on research methodology are of opinion that research reports are based on the logic of reasoning and that such reports communicate with the reader by presenting logical, coherent arguments (Böhme, 1975:206; Mouton, 1996:69). This view implies that researchers draw specific conclusions and that such conclusions are justified by way of reasoning (Doppelt, 1998:105; Giere, 1984:26; Harre, 1965:11; Leherer & Wagner, 1983 & Pitt, 1988:7). The structure of a research report thus consists mainly of conclusions and reasons for such conclusions (Booth, Colomb & Williams, 1995:97). From this it appears that justification by means of reasoning is a standard procedure in research and research reports. Despite the fact that the logic of research is based on reasoning, that the justification of research findings by way of reasoning appears to be standard procedure and that the structure of a research report comprises arguments, the evaluation or assessment of research, as described in most textbooks on research methodology (Burns & Grove, 1993:647; Creswell, 1994:193; LoBiondo-Wood & Haber, 1994:441/481) does not focus on the arguments of research. The evaluation criteria for research reports which are set in these textbooks are related to the way in which the research process is carried out and focus on the measures for internal, external, theoretical, measurement and inferential validity. This means that criteria for the evaluation of research are comprehensive and they should be very specific in respect of each type of research (for example quantitative or qualitative). When the evaluation of research reports is focused on arguments and logic, there could probably be one set of universal standards against which all types of human science research reports can be assessed. Such a universal set of standards could possibly simplify the evaluation of research reports in the human sciences since they can be used to assess all the critical aspects of research reports

  17. A New Tool for Identifying Research Standards and Evaluating Research Performance

    Science.gov (United States)

    Bacon, Donald R.; Paul, Pallab; Stewart, Kim A.; Mukhopadhyay, Kausiki

    2012-01-01

    Much has been written about the evaluation of faculty research productivity in promotion and tenure decisions, including many articles that seek to determine the rank of various marketing journals. Yet how faculty evaluators combine journal quality, quantity, and author contribution to form judgments of a scholar's performance is unclear. A…

  18. Evaluation of factors important to enhance productivity

    Directory of Open Access Journals (Sweden)

    Sanjay Kumar

    2016-12-01

    Full Text Available Productivity as a measure for output is important to industry and academia. In this research, factors to enhance productivity have been identified from the literature by reviewing various international and national sources to explore this evergreen field of research that is “productivity,” which has always been an increasingly interesting area of research for researchers over decades or perhaps over centuries. In total, 15 number of factors have been identified to enhance productivity. Analytic hierarchy process approach has been appropriately chosen to rank these factors because of its simplicity and effectiveness. The tool has been used by taking perception of experts from the Indian manufacturing industry. Positive attitude and involvement of management, proactive employees, and good working conditions have been ranked as top three factors as per the experts’ opinion. The ranking of factors to enhance productivity, categorization of the factors into four perspectives, and hierarchy of perspective and action plan as a final outcome of the paper may help academia and operations managers toward effective management of “operations and production activities of firms/supply chains.”

  19. Center for Drug Evaluation and Research

    Data.gov (United States)

    Federal Laboratory Consortium — The Center for Drug Evaluation and Research(CDER) performs an essential public health task by making sure that safe and effective drugs are available to improve the...

  20. Research Award: Policy and Evaluation | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-09-07

    Sep 7, 2016 ... IDRC is one of the world's leaders in generating new knowledge to meet ... research skills and gain a fresh perspective on crucial development issues. ... What is cutting-edge practice for evaluating the building of leaders?

  1. Bibliometrics and research evaluation uses and abuses

    CERN Document Server

    Gingras, Yves

    2016-01-01

    The research evaluation market is booming. "Ranking," "metrics," "h-index," and "impact factors" are reigning buzzwords. Government and research administrators want to evaluate everything -- teachers, professors, training programs, universities -- using quantitative indicators. Among the tools used to measure "research excellence," bibliometrics -- aggregate data on publications and citations -- has become dominant. Bibliometrics is hailed as an "objective" measure of research quality, a quantitative measure more useful than "subjective" and intuitive evaluation methods such as peer review that have been used since scientific papers were first published in the seventeenth century. In this book, Yves Gingras offers a spirited argument against an unquestioning reliance on bibliometrics as an indicator of research quality. Gingras shows that bibliometric rankings have no real scientific validity, rarely measuring what they pretend to. Although the study of publication and citation patterns, at the proper scales...

  2. Evaluation of isotope utilizations in consumer products

    International Nuclear Information System (INIS)

    Sato, Otomaru

    1980-01-01

    Consumer products are generally divided into three groups, according to the state of radioactive material or radiation used. First, there are those intentionally added with radioactive materials, such as self-luminous paints and ionization type smoke detectors, utilizing the ionization and excitation by radiation. Second, there are those utilizing natural radioactive materials like glaze. Third, there are those materials containing intrinsically natural radioactive materials. In the first group, the safety evaluation of self-luminous watches and clocks and the risk-benefit evaluation of ionization type smoke detectors are described, and the approval standards for the consumer products and the R/B evaluation method are explained. There are variety of consumer products utilizing radiation, by the exposure dose caused by them is extremely insignificant, far lower than that due to natural radiation. (J.P.N.)

  3. Vegetable soybean: seed composition and production research

    Directory of Open Access Journals (Sweden)

    Qiuying Zhang

    2017-10-01

    Full Text Available Vegetable soybean (edamame [Glycine max (L. Merr.] is a low input, high nutritional value, short crop cycle and soil-enriching profitable crop. It offers quick economic return and provides health benefits to the consumers. The market demand for edamame has begun to flourish and expand dramatically in recent decades due to increased awareness of nutritional properties, and the change in life styles towards healthier food. This article highlighted the importance of edamame as a nutraceutical and functional food-grade produce, summarised the research advances in seed composition and their roles, cultivar selection and crop establishment, planting date and fertilisation, weed management and harvesting. Current production problem of extensive labor at harvest and future research challenges in improving crop establishment, developing cultivars competitive to weed and resistant to pest insects/diseases, assessing biological activities of edamame elemental and phytochemical properties on cancer cell inhibition, and developing organic production system were also proposed with aims of enhancing farm profitability and expanding opportunities for extensive use of edamame.

  4. EVALUATION OF PRODUCT DEVELOPMENT PROCESS USING EMVS

    Directory of Open Access Journals (Sweden)

    Iara Tonissi Moroni Cutovoi

    2014-12-01

    Full Text Available This paper evaluates a PDP model application in an auto parts company, leader in its segment. From the application of lean thinking in the supply chain and the EMVS performance analysis methodology for PDP, a check list is created to avoid waste in project management. In this paper, we show that EMVS can be positively impacted through active management of knowledge within a project. This paper suggests that the value-enabling portion of a project manager's role requires aligning knowledge across these three key domains regarding PDP Gates (Phases at company manufacturers of auto parts, Lean Thinking and Value Stream, and methodology for managing projects through performance-term rates and costs. The results show that the methodology has positive aspects, but its implementation takes time and has repercussions throughout the supply chain. Further this research try to explain the types of wastes and view of new products' development is enhanced and associates a manufacturing strategy focus on EMVS performance analysis and lean thinking, PDP and value stream mapping  showing the important of contribution this tools at reduction of waste.

  5. Sustainability evaluation of nanotechnology processing and production

    OpenAIRE

    Teresa M. Mata; Nídia de Sá Caetano; António A. Martins

    2015-01-01

    This article discusses the current situation and challenges posed by nanotechnology from a sustainability point of view. It presents an objective methodology to evaluate the sustainability of nanotechnology products, based on a life cycle thinking approach, a framework particularly suited to assess all current and future relevant economic, societal and environmental impacts products and processes. It is grounded on a hierarchical definition of indicators, starting from 3D indicators that take...

  6. Childhood Obesity Research Demonstration (CORD): Evaluation plan

    Science.gov (United States)

    The Childhood Obesity Research Demonstration (CORD) project evaluation will determine the extent to which the CORD model of linking primary care (PC) interventions to public health (PH) interventions in multiple community sectors affects BMI and behavior in children (2 to 12 years). The evaluation c...

  7. Research Quality Plus (RQ+) A Holistic Approach to Evaluating Research

    Energy Technology Data Exchange (ETDEWEB)

    McLean, R.K.D.; Feinstein, O.N.

    2016-07-01

    The International Development Research Centre (IDRC) strives to fund excellence in research - defining excellence as, {sup m}ethodologically sound, evidence-based, and scientifically robust{sup .} But how is the concept of excellence identified and evaluated across the diverse range of research the IDRC supports? The Research Quality Plus (RQ+) Assessment Framework was developed in order to address these complex issues. It provides a systems-informed approach to defining and evaluating the quality of research, and its positioning for use and impact. It allows tailoring to context, values, mandate and purpose, and can support planning, management and learning processes at any stage in the lifetime of a research project, program or grants portfolio. This paper presents: 1) the rationale for RQ+ creation, 2) the RQ+ Assessment Framework, and how it can be adapted and used, 3) our early experiences applying it in a series of extenal evaluations of research quality. The paper is presented by an RQ+ designer and an external user. (Author)

  8. Rapeseed research and production in China

    Directory of Open Access Journals (Sweden)

    Qiong Hu

    2017-04-01

    Full Text Available Rapeseed (Brassica napus L. is the largest oilseed crop in China and accounts for about 20% of world production. For the last 10 years, the production, planting area, and yield of rapeseed have been stable, with improvement of seed quality and especially seed oil content. China is among the leading countries in rapeseed genomic research internationally, having jointly with other countries accomplished the whole genome sequencing of rapeseed and its two parental species, Brassica oleracea and Brassica rapa. Progress on functional genomics including the identification of QTL governing important agronomic traits such as yield, seed oil content, fertility regulation, disease and insect resistance, abiotic stress, nutrition use efficiency, and pod shattering resistance has been achieved. As a consequence, molecular markers have been developed and used in breeding programs. During 2005–2014, 215 rapeseed varieties were registered nationally, including 210 winter- and 5 spring-type varieties. Mechanization across the whole process of rapeseed production was investigated and operating instructions for all relevant techniques were published. Modern techniques for rapeseed field management such as high-density planting, controlled-release fertilizer, and biocontrol of disease and pests combined with precision tools such as drones have been developed and are being adopted in China. With the application of advanced breeding and production technologies, in the near future, the oil yield and quality of rapeseed varieties will be greatly increased, and more varieties with desirable traits, especially early maturation, high yield, high resistance to biotic and abiotic stress, and suitability for mechanized harvesting will be developed. Application of modern technologies on the mechanized management of rapeseed will greatly increase grower profit.

  9. Evaluating factors that influence egg production at Konsoni Poultry Company

    OpenAIRE

    Muje Gjonbalaj; Arben Musliu; Myrvete Badivuku-Pantina; Ilir Zenalaj

    2009-01-01

    The main focus of this research is to evaluate the factors thought to influence the monthly egg production of Konsoni Poultry Company. The linear regression employing different variables of interest is used to predict the future monthly egg production of the largest poultry farm in Kosovo. The general purpose of multiple regressions (the term was first used by Pearson, 1908) is to learn more about the relationship between egg price, local competitors and egg imports as independent or predicto...

  10. Farmer evaluation of dried banana based products | Pekke | African ...

    African Journals Online (AJOL)

    A farmer participatory evaluation of dried banana based products was conducted in various districts of Uganda. Bananas were dried using a tunnel solar dryer developed by Post Harvest Handling and Storage project (PHHS) of Kawanda Post-harvest Programme and improved by the National Banana Research ...

  11. Assessment on Peri-Urban Dairy Production System and Evaluation ...

    African Journals Online (AJOL)

    Assessment on Peri-Urban Dairy Production System and Evaluation of Quality of Cows' Raw Milk: A Case of Shambu, Fincha and Kombolcha Towns of Horro Guduru Wollega Zone, Ethiopia. ... Science, Technology and Arts Research Journal ... Keywords: Bacterial load Ethiopia Horro Guduru Peri-Urban Dairying Raw milk ...

  12. Evaluating PHA productivity of bioengineered Rhodosprillum rubrum.

    Directory of Open Access Journals (Sweden)

    Huanan Jin

    Full Text Available This study explored the potential of using Rhodosprillum rubrum as the biological vehicle to convert chemically simple carbon precursors to a value-added bio-based product, the biopolymer PHA. R. rubrum strains were bioengineered to overexpress individually or in various combinations, six PHA biosynthetic genes (phaC1, phaA, phaB, phaC2, phaC3, and phaJ, and the resulting nine over-expressing strains were evaluated to assess the effect on PHA content, and the effect on growth. These experiments were designed to genetically evaluate: 1 the role of each apparently redundant PHA polymerase in determining PHA productivity; 2 identify the key gene(s within the pha biosynthetic operon that determines PHA productivity; and 3 the role of phaJ to support PHA productivity. The result of overexpressing each PHA polymerase-encoding gene indicates that phaC1 and phaC2 are significant contributors to PHA productivity, whereas phaC3 has little effect. Similarly, over-expressing individually or in combination the three PHA biosynthesis genes located in the pha operon indicates that phaB is the key determinant of PHA productivity. Finally, analogous experiments indicate that phaJ does not contribute significantly to PHA productivity. These bioengineering strains achieved PHA productivity of up to 30% of dry biomass, which is approximately 2.5-fold higher than the non-engineered control strain, indicating the feasibility of using this approach to produce value added bio-based products.

  13. Fission-product burnup chain model for research reactor application

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jung Do; Gil, Choong Sup; Lee, Jong Tai [Korea Atomic Energy Research Inst., Daeduk (Republic of Korea)

    1990-12-01

    A new fission-product burnup chain model was developed for use in research reactor analysis capable of predicting the burnup-dependent reactivity with high precision over a wide range of burnup. The new model consists of 63 nuclides treated explicitly and one fissile-independent pseudo-element. The effective absorption cross sections for the preudo-element and the preudo-element yield of actinide nuclides were evaluated in the this report. The model is capable of predicting the high burnup behavior of low-enriched uranium-fueled research reactors.(Author).

  14. A Social Systems Approach to Evaluation Research.

    Science.gov (United States)

    Olien, C. N.; And Others

    An information-control systems model for evaluation of adult education programs is offered and illustrated. The model is based upon identifying principal subsystems, such as source, channel and audience, which are involved in initiation, production, delivery and reception of educational messages. These subsystems are seen as separate but…

  15. Evaluating Translational Research: A Process Marker Model

    Science.gov (United States)

    Trochim, William; Kane, Cathleen; Graham, Mark J.; Pincus, Harold A.

    2011-01-01

    Abstract Objective: We examine the concept of translational research from the perspective of evaluators charged with assessing translational efforts. One of the major tasks for evaluators involved in translational research is to help assess efforts that aim to reduce the time it takes to move research to practice and health impacts. Another is to assess efforts that are intended to increase the rate and volume of translation. Methods: We offer an alternative to the dominant contemporary tendency to define translational research in terms of a series of discrete “phases.”Results: We contend that this phased approach has been confusing and that it is insufficient as a basis for evaluation. Instead, we argue for the identification of key operational and measurable markers along a generalized process pathway from research to practice. Conclusions: This model provides a foundation for the evaluation of interventions designed to improve translational research and the integration of these findings into a field of translational studies. Clin Trans Sci 2011; Volume 4: 153–162 PMID:21707944

  16. Methodology for evaluation of industrial CHP production

    International Nuclear Information System (INIS)

    Pavlovic, Nenad V.; Studovic, Milovan

    2000-01-01

    At the end of the century industry switched from exclusive power consumer into power consumer-producer which is one of the players on the deregulated power market. Consequently, goals of industrial plant optimization have to be changed, making new challenges that industrial management has to be faced with. In the paper is reviewed own methodology for evaluation of industrial power production on deregulated power market. The methodology recognizes economic efficiency of industrial CHP facilities as a main criterion for evaluation. Energy and ecological efficiency are used as additional criteria, in which implicit could be found social goals. Also, methodology recognizes key and limit factors for CHP production in industry. It could be successful applied, by use of available commercial software for energy simulation in CHP plants and economic evaluation. (Authors)

  17. 7 CFR 932.45 - Production research and marketing research and development projects.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Production research and marketing research and....45 Production research and marketing research and development projects. (a) The following activities... Secretary, establish or provide for the establishment of production research, and marketing research and...

  18. 7 CFR 915.45 - Production research, marketing research and development.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Production research, marketing research and... Production research, marketing research and development. The committee may, with the approval of the Secretary, establish or provide for the establishment of production research, marketing research and...

  19. Regional Research Networking: A Stimulus to Research Collaboration and Research Productivity.

    Science.gov (United States)

    McElmurry, Beverly J.; Minckley, Barbara B.

    1986-01-01

    Models for collegial networking as a means of increasing the participants' scholarly productivity are presented. A Midwestern historical methodology research interest group is described as an example of the long-term benefits of forming networks of scholars. (MSE)

  20. Functional Capacity Evaluation Research : Report from the Third International Functional Capacity Evaluation Research Meeting

    NARCIS (Netherlands)

    James, C. L.; Reneman, M. F.; Gross, D. P.

    Introduction Functional capacity evaluations are an important component of many occupational rehabilitation programs and can play a role in facilitating reintegration to work thus improving health and disability outcomes. The field of functional capacity evaluation (FCE) research has continued to

  1. Evaluating the hydrological consistency of evaporation products

    KAUST Repository

    Lopez Valencia, Oliver Miguel; Houborg, Rasmus; McCabe, Matthew

    2017-01-01

    Advances in space-based observations have provided the capacity to develop regional- to global-scale estimates of evaporation, offering insights into this key component of the hydrological cycle. However, the evaluation of large-scale evaporation retrievals is not a straightforward task. While a number of studies have intercompared a range of these evaporation products by examining the variance amongst them, or by comparison of pixel-scale retrievals against ground-based observations, there is a need to explore more appropriate techniques to comprehensively evaluate remote-sensing-based estimates. One possible approach is to establish the level of product agreement between related hydrological components: for instance, how well do evaporation patterns and response match with precipitation or water storage changes? To assess the suitability of this "consistency"-based approach for evaluating evaporation products, we focused our investigation on four globally distributed basins in arid and semi-arid environments, comprising the Colorado River basin, Niger River basin, Aral Sea basin, and Lake Eyre basin. In an effort to assess retrieval quality, three satellite-based global evaporation products based on different methodologies and input data, including CSIRO-PML, the MODIS Global Evapotranspiration product (MOD16), and Global Land Evaporation: the Amsterdam Methodology (GLEAM), were evaluated against rainfall data from the Global Precipitation Climatology Project (GPCP) along with Gravity Recovery and Climate Experiment (GRACE) water storage anomalies. To ensure a fair comparison, we evaluated consistency using a degree correlation approach after transforming both evaporation and precipitation data into spherical harmonics. Overall we found no persistent hydrological consistency in these dryland environments. Indeed, the degree correlation showed oscillating values between periods of low and high water storage changes, with a phase difference of about 2–3 months

  2. Evaluating the hydrological consistency of evaporation products

    KAUST Repository

    Lopez Valencia, Oliver Miguel

    2017-01-18

    Advances in space-based observations have provided the capacity to develop regional- to global-scale estimates of evaporation, offering insights into this key component of the hydrological cycle. However, the evaluation of large-scale evaporation retrievals is not a straightforward task. While a number of studies have intercompared a range of these evaporation products by examining the variance amongst them, or by comparison of pixel-scale retrievals against ground-based observations, there is a need to explore more appropriate techniques to comprehensively evaluate remote-sensing-based estimates. One possible approach is to establish the level of product agreement between related hydrological components: for instance, how well do evaporation patterns and response match with precipitation or water storage changes? To assess the suitability of this "consistency"-based approach for evaluating evaporation products, we focused our investigation on four globally distributed basins in arid and semi-arid environments, comprising the Colorado River basin, Niger River basin, Aral Sea basin, and Lake Eyre basin. In an effort to assess retrieval quality, three satellite-based global evaporation products based on different methodologies and input data, including CSIRO-PML, the MODIS Global Evapotranspiration product (MOD16), and Global Land Evaporation: the Amsterdam Methodology (GLEAM), were evaluated against rainfall data from the Global Precipitation Climatology Project (GPCP) along with Gravity Recovery and Climate Experiment (GRACE) water storage anomalies. To ensure a fair comparison, we evaluated consistency using a degree correlation approach after transforming both evaporation and precipitation data into spherical harmonics. Overall we found no persistent hydrological consistency in these dryland environments. Indeed, the degree correlation showed oscillating values between periods of low and high water storage changes, with a phase difference of about 2–3 months

  3. Commentary: Writing and Evaluating Qualitative Research Reports

    Science.gov (United States)

    Thompson, Deborah; Aroian, Karen J.; McQuaid, Elizabeth L.; Deatrick, Janet A.

    2016-01-01

    Objective To provide an overview of qualitative methods, particularly for reviewers and authors who may be less familiar with qualitative research. Methods A question and answer format is used to address considerations for writing and evaluating qualitative research. Results and Conclusions When producing qualitative research, individuals are encouraged to address the qualitative research considerations raised and to explicitly identify the systematic strategies used to ensure rigor in study design and methods, analysis, and presentation of findings. Increasing capacity for review and publication of qualitative research within pediatric psychology will advance the field’s ability to gain a better understanding of the specific needs of pediatric populations, tailor interventions more effectively, and promote optimal health. PMID:27118271

  4. Commentary: Writing and Evaluating Qualitative Research Reports.

    Science.gov (United States)

    Wu, Yelena P; Thompson, Deborah; Aroian, Karen J; McQuaid, Elizabeth L; Deatrick, Janet A

    2016-06-01

    To provide an overview of qualitative methods, particularly for reviewers and authors who may be less familiar with qualitative research. A question and answer format is used to address considerations for writing and evaluating qualitative research. When producing qualitative research, individuals are encouraged to address the qualitative research considerations raised and to explicitly identify the systematic strategies used to ensure rigor in study design and methods, analysis, and presentation of findings. Increasing capacity for review and publication of qualitative research within pediatric psychology will advance the field's ability to gain a better understanding of the specific needs of pediatric populations, tailor interventions more effectively, and promote optimal health. © The Author 2016. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  5. Practical Assessment, Research and Evaluation, 2001.

    Science.gov (United States)

    Rudner, Lawrence M., Ed.; Schafer, William D., Ed.

    2001-01-01

    This document consists of articles 23 through 26 published in the electronic journal "Practical Assessment, Research & Evaluation" in 2001: (23) "Effects of Removing the Time Limit on First and Second Language Intelligence Test Performance" (Jennifer Mullane and Stuart J. McKelvie); (24) "Consequences of (Mis)use of the Texas Assessment of…

  6. Evaluating factors that influence egg production at Konsoni Poultry Company

    Directory of Open Access Journals (Sweden)

    Muje Gjonbalaj

    2009-05-01

    Full Text Available The main focus of this research is to evaluate the factors thought to influence the monthly egg production of Konsoni Poultry Company. The linear regression employing different variables of interest is used to predict the future monthly egg production of the largest poultry farm in Kosovo. The general purpose of multiple regressions (the term was first used by Pearson, 1908 is to learn more about the relationship between egg price, local competitors and egg imports as independent or predictor variables (xi and dependent or criterion variable, egg production (y. Y = B0 + B1*X1 + B2*X2 + …Bn*XnThe results of the research come from the observed fluctuations in egg production at Konsoni Poultry Company during the period of 24 months. Many factors that effect egg production are poorly understood from managers of Konsoni Poultry Company. This study examines the statistical results and identifies the relationships between depended and independent variables. The study shows that there is a strong relationships between depend variably (y and independent variables (xi. and low correlations among independent variables The adjusted R2 of the multiple linear regression model is 0.48 which tells us that 48% of variation in egg production are explained by evaluated variables.Konsoni Poultry Company covers 20% of the market share for eggs in Kosovo. In general, multiple regression is used to answer the general question what is the best predictor of Konsoni egg production.

  7. Research into real-option evaluation method

    International Nuclear Information System (INIS)

    Shiba, Tsuyoshi; Wakamatsu, Hitoshi

    2002-03-01

    As an evaluational method for valuation of a corporation, an investment project, a research and development, or the evaluation technique of an enterprise strategy, a real option analysis attracts attention instead of conventional Discount Cash Flow method. The reason is that it can divert the technique for the option valuation in financial engineering to the decision-making process performed according to change in investment environment. Related references, the analysis tools, the application examples, etc. were investigated about the decision-making technique using real option analysis, and this investigation considered the application method to decision-making of the research and development at Japan Nuclear Cycle Development Institute. Consequently, since the feature is in real option analysis being the evaluation technique on condition of that business conditions and business itself also change, the real option analysis fits for evaluation of a research and development that business conditions were opaque and it turns out that the businesses are highly flexible. Moreover, it turns out that it fits also for evaluation of a capital concentration type investment issue like power plants. (author)

  8. The Impacts of Country-of-origin, Product Involvement, and Product Familiarity on Product Evaluation

    OpenAIRE

    Nugroho, Sahid Susilo; Rostiani, Rokhima; Gitosudarmo, Indriyo

    2014-01-01

    One of the most interesting phenomena in global business is the existence of a product’scountry-of-origin (COO). COO as an informational cue has been proven to affect consumer’spurchasing decisions in terms of their perception towards the product’s attributes as well astheir overall evaluation of the product. The objective of this study is to investigate the impacts ofcountry-of-origin on product evaluation in the Indonesian market by considering consumers’product familiarity and consumers’ p...

  9. Evaluation of the energy efficiency of alternative processes and technology chains (BEAT). Research for the production of tomorrow. Focus: Simulation and evaluation. Final report for the research project; Bewertung der Energieeffizienz alternativer Prozesse und Technologieketten (BEAT). Forschung fuer die Produktion von morgen. Schwerpunkt: Simulation und Bewertung. Abschlussbericht fuer das Verbundprojekt

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-07-01

    Satisfying the needs of people in a globalized world requires a sustainable development. The production of goods is a key role in the development of this sustainable development. The sustainable development of manufacturing companies requires the implementation of new lifecycle assessment methods for manufacturing processes and manufacturing technology chains. This final report under consideration describes the development of a methodology for the evaluation and assessment of technology chains using the production of a gear wheel and an injector.

  10. Amersham research products 1985/86

    International Nuclear Information System (INIS)

    1985-01-01

    The publication contains data on this technology in general, on quality assurance in analysis and applications, on special synthesis and tritium labelling services and on radioactivity measurements. Included are a product list of radionuclides, an alphabetical product list with product specifications and structural formulas and a list of RIA kits and control sera for clinical diagnoses. (DG) [de

  11. Research in Organic Animals and Livestock Production

    DEFF Research Database (Denmark)

    Vaarst, Mette

    2009-01-01

    developed in Western Europe and USA, where they are primarily niche products for consumers who give priority to environmental and animal welfare concerns. In these countries organic livestock production offers the option of establishing a niche product that can be sold at a higher price, e.g. as for milk...

  12. Medical isotope production: A new research initiative for the Annular Core Research Reactor

    International Nuclear Information System (INIS)

    Coats, R.L.; Parma, E.J.

    1993-01-01

    An investigation has been performed to evaluate the capabilities of the Annular Core Research Reactor and its supporting Hot Cell Facility for the production of 99 Mo and its separation from the fission product stream. Various target irradiation locations for a variety of core configurations were investigated, including the central cavity, fuel and reflector locations, and special target configurations outside the active fuel region. Monte Carlo techniques, in particular MCNP using ENDF B-V cross sections, were employed for the evaluation. The results indicate that the reactor, as currently configured, and with its supporting Hot Cell Facility, would be capable in meeting the current US demand if called upon. Modest modifications, such as increasing the capacity of the external heat exchangers, would permit significantly higher continuous power operation and even greater 99 Mo production ensuring adequate capacity for future years

  13. AGRICULTURAL ENTERPRISES PRODUCTION EVALUATION AND DEVELOPMENT IN UKRAINE

    Directory of Open Access Journals (Sweden)

    Serhiy Us

    2016-11-01

    Full Text Available The purpose of the article is to analyze correlation between production volume (V, labour factor (L and capital factor (K with further production volume forecasting of researched agricultural enterprises in Ukraine as well as their competitiveness in the European market. Methodology. The survey based on statistical data of State statistics service in Ukraine, Poland and accounting data of investigated enterprises during 2004-2013 years. Production volume and capital amount taken in monetary terms, labour factor is calculated in monetary terms using the average wage and the number of employees. Treatment of major production factors according to classical economic theory is generalized. Correlation of V, L and K factors are calculated using method of the least squares in production function evaluation. Production volume of enterprises A and B are forecasted with further evaluation of its reliability in the econometric program EViews 7. Results of the survey showed the dominant role of L factor over the K factor especially after world economic crisis 2008 in investigated agricultural enterprises of Ukraine. According to high determination coefficient, the influence of both factors on production volume is 85% for enterprise A and 95% for enterprise B. Production forecast shows the increase of its volume till 2020 in both enterprises with high probability according to forecast credibility indicator MAPE. Practical implications. Application of the results, in particular the ratio of production factors and forecast of production volume, will allow more effective use of production resources and better planning of production process taking into account market conditions. Value/originality. Production activity estimation and output forecast of investigated agricultural enterprises were used for competitiveness analysis of agricultural enterprises in Ukraine and Poland, which is important for European integration process of domestic economy.

  14. Research methodological issues in evaluating herbal interventions

    Directory of Open Access Journals (Sweden)

    Dipika Bansal

    2010-02-01

    Full Text Available Dipika Bansal, Debasish Hota, Amitava ChakrabartiPostgraduate Institute of Medical Education and Research, Chandigarh, IndiaAbstract: Randomized controlled trials provide the best evidence, and is seen as the gold standard for allopathic research. Herbal therapies are not an integral part of conventional care although they are still used by patients in their health care management. These medicines need to be subjected to rigorous research to establish their effectiveness and safety. Clearly defined treatments are required and should be recorded in a manner that enables other suitably trained researchers to reproduce them reliably. Quality control of herbal products is also a prerequisite of credible clinical trials. Methodological strategies for investigating the herbal interventions and the issues regarding appropriate patient selection, randomization and blinding, placebo effects and choice of comparator, occupational standardization and the selection of appropriate study endpoints to prove efficacy are being discussed. This paper will review research options and propose some suggestions for future research design.Keywords: CAM research, herbal therapies, methodology, clinical trial

  15. Women Academics and Research Productivity: An International Comparison

    Science.gov (United States)

    Aiston, Sarah Jane; Jung, Jisun

    2015-01-01

    In the prestige economy of higher education, research productivity is highly prized. Previous research indicates, however, a gender gap with respect to research output. This gap is often explained by reference to familial status and responsibilities. In this article, we examine the research productivity gender gap from an international perspective…

  16. Research evaluation and competition for academic positions in occupational medicine.

    Science.gov (United States)

    Franco, Giuliano

    2013-01-01

    Citation analysis is widely used to evaluate the performance of individual researchers, journals, and universities. Its outcome plays a crucial role in the decision-making process of ranking applicants for an academic position. A number of indicators, including the h-index reflecting both scientific productivity and its relevance in medical fields, are available through the Web of Knowledge( sm ) and Scopus®. In the field of occupational medicine, the adoption of the h-index in assessing the value of core journals shows some advantages compared with traditional bibliometrics and may encourage researchers to submit their papers. Although evaluation of the overall individual performance for academic positions should assess several aspects, scientific performance is usually based on citation analysis indicators. Younger researchers should be aware of the new approach based on transparent threshold rules for career promotion and need to understand the new evaluation systems based on metrics.

  17. Case study of information product for strategy research, planning research, and policy research

    International Nuclear Information System (INIS)

    Yuan Yujun; Zou Lin; Liu Qun; Wang Yongping

    2010-01-01

    Soft science research is significant and can directly support the decision-making and development. The strategy research, planning research, and policy research each play an important role in soft science research. As the National Strategy of Informatization being implemented and advanced, some progress are made and some special information tools are produced in the process of strengthening the development research with information technologies. At first, the article introduced some cases of information products application, such as the domestic and overseas information products for energy strategy research and planning research and policy research, the governmental management information system for planning and investment, examination and approval and permission system for the planning of the land for construction, China agriculture decision support system and so on, and also gave a brief analysis on the theories and methods, main functions and application status. And then, with a analysis on the features of the works of development planning of China National Nuclear Corporation (CNNC) development, this article gave some suggestions on how to strengthen the development of information system for the development planning of the CNNC. (authors)

  18. Determinants of Research Productivity in Spanish Academia

    Science.gov (United States)

    Albert, Cecilia; Davia, María A.; Legazpe, Nuria

    2016-01-01

    This article aims to widen the empirical evidence about the determinants of Spanish academics' publication productivity across fields of study. We use the Spanish Survey on Human Resources in Science and Technology addressed to Spanish resident PhDs employed in Spanish universities as academics. Productivity is measured as the total number of…

  19. EOS Data Products Latency and Reprocessing Evaluation

    Science.gov (United States)

    Ramapriyan, H. K.; Wanchoo, L.

    2012-12-01

    NASA's Earth Observing System (EOS) Data and Information System (EOSDIS) program has been processing, archiving, and distributing EOS data since the launch of Terra platform in 1999. The EOSDIS Distributed Active Archive Centers (DAACs) and Science-Investigator-led Processing Systems (SIPSs) are generating over 5000 unique products with a daily average volume of 1.7 Petabytes. Initially EOSDIS had requirements to make process data products within 24 hours of receiving all inputs needed for generating them. Thus, generally, the latency would be slightly over 24 and 48 hours after satellite data acquisition, respectively, for Level 1 and Level 2 products. Due to budgetary constraints these requirements were relaxed, with the requirement being to avoid a growing backlog of unprocessed data. However, the data providers have been generating these products in as timely a manner as possible. The reduction in costs of computing hardware has helped considerably. It is of interest to analyze the actual latencies achieved over the past several years in processing and inserting the data products into the EOSDIS archives for the users to support various scientific studies such as land processes, oceanography, hydrology, atmospheric science, cryospheric science, etc. The instrument science teams have continuously evaluated the data products since the launches of EOS satellites and improved the science algorithms to provide high quality products. Data providers have periodically reprocessed the previously acquired data with these improved algorithms. The reprocessing campaigns run for an extended time period in parallel with forward processing, since all data starting from the beginning of the mission need to be reprocessed. Each reprocessing activity involves more data than the previous reprocessing. The historical record of the reprocessing times would be of interest to future missions, especially those involving large volumes of data and/or computational loads due to

  20. Evaluation of melanin production by Sporothrix luriei

    Directory of Open Access Journals (Sweden)

    Ingrid Ludmilla Rodrigues Cruz

    Full Text Available There is a paucity of studies on the cell biology of Sporothrix luriei, the less common of the pathogenic Sporothrix species worldwide. The production of DHN-melanin, eumelanin, and pyomelanin were evaluated on the mycelial and yeast forms of the S. luriei ATCC 18616 strain. The mycelial form of this species produced only pyomelanin, which protected the fungus against environmental stressors such as ultraviolet light, heat, and cold. The yeast form was unable to produce any of the tested melanin types. The lack of melanin in the parasitic form of S. luriei may be an explanation for its low frequency in human infections.

  1. Evaluation of melanin production by Sporothrix luriei.

    Science.gov (United States)

    Cruz, Ingrid Ludmilla Rodrigues; Figueiredo-Carvalho, Maria Helena Galdino; Zancopé-Oliveira, Rosely Maria; Almeida-Paes, Rodrigo

    2018-01-01

    There is a paucity of studies on the cell biology of Sporothrix luriei, the less common of the pathogenic Sporothrix species worldwide. The production of DHN-melanin, eumelanin, and pyomelanin were evaluated on the mycelial and yeast forms of the S. luriei ATCC 18616 strain. The mycelial form of this species produced only pyomelanin, which protected the fungus against environmental stressors such as ultraviolet light, heat, and cold. The yeast form was unable to produce any of the tested melanin types. The lack of melanin in the parasitic form of S. luriei may be an explanation for its low frequency in human infections.

  2. Analytical evaluation of fission product sensitivities

    International Nuclear Information System (INIS)

    Sola, A.

    1977-01-01

    Evaluating the concentration of a fission product produced in a reactor requires the knowledge of a fairly large number of variables. Sensitivity studies were made to ascertain the important variables. Analytical formulae were developed sufficiently simple to allow numerical computations. Some simplified formulas are also given and they are applied to the following isotopes: 80 Se, 82 Se, 81 Br, 82 Br, 82 Kr, 83 Kr, 84 Kr, 85 Kr, 86 Kr. Their sensitivities to capture cross sections, fission yields, ratios of activation cross sections, half-lives (during and after irradiation), branching ratios, as well as to the neutron flux and to the time are considered

  3. Evaluation of pig production practices, constraints and opportunities for improvement in smallholder production systems in Kenya.

    Science.gov (United States)

    Mbuthia, Jackson Mwenda; Rewe, Thomas Odiwuor; Kahi, Alexander Kigunzu

    2015-02-01

    This study evaluated pig production practices by smallholder farmers in two distinct production systems geared towards addressing their constraints and prospects for improvement. The production systems evaluated were semi-intensive and extensive and differed in remoteness, market access, resource availability and pig production intensity. Data were collected using structured questionnaires where a total of 102 pig farmers were interviewed. Qualitative and quantitative research methods were employed to define the socioeconomic characteristics of the production systems, understanding the different roles that pigs play, marketing systems and constraints to production. In both systems, regular cash income and insurance against emergencies were ranked as the main reasons for rearing pigs. Marketing of pigs was mainly driven by the type of production operation. Finances, feeds and housing were identified as the major constraints to production. The study provides important parameters and identifies constraints important for consideration in design of sustainable production improvement strategies. Feeding challenges can be improved through understanding the composition and proper utilization of local feed resources. Provision of adequate housing would improve the stocking rates and control mating.

  4. Flour production from shrimp by-products and sensory evaluation of flour-based products

    Directory of Open Access Journals (Sweden)

    Thiago Mendes Fernandes

    2013-08-01

    Full Text Available The objective of this work was to evaluate the production of flour using by-products (cephalothorax obtained from the shrimp (Litopenaeus vannamei industry, and to perform a sensory analysis of shrimp flour-based products. Physicochemical and microbiological analyses on fresh cephalothorax and on manufactured flour were performed, as well as the determination of cholesterol content of this flour, and the sensorial evaluation of soup and pastry made with this flour. By the microbiological analyses, no pathogenic microorganism was detected in the samples. Physicochemical analyses of flour showed high levels of protein (50.05% and minerals (20.97%. Shrimp cephalothorax flour showed high levels of cholesterol. The sensory evaluation indicated a good acceptance of the products, with satisfactory acceptability index (81% for soup, and 83% for pastry, which indicates that shrimp cephalothorax in the form of flour has a potential for developing new products.

  5. Measurement, calculation and evaluation of photon production cross-sections

    International Nuclear Information System (INIS)

    Kocherov, N.P.

    1990-03-01

    The IAEA Specialists' Meeting on Measurement, Calculation and Evaluation of Photon Production Cross-Sections was held in Smolenice, Czechoslovakia, 5-7 February 1990. The meeting was hosted by the Institute of Physics of the Electro-Physical Research Centre, Slovak Academy of Sciences, Bratislava. This report contains the conclusions and recommendations of this meeting. The papers which the participants have presented at the meeting will be published as an INDC Report. (author)

  6. North American long-term soil productivity research program

    Science.gov (United States)

    Allan E. Tiarks; Robert F. Powers; Jerry F. Ragus; Deborah S. Page-Dumroese; Felix Ponder; Douglas M. Stone

    1997-01-01

    The National Long-term Soil Productivity research program was chartered to address National Forest Management Act concerns over possible losses n soil productivity on national forest lands. The program supports validation of soil quality monitoring standards and process-level productivity research. Summarized results are supplied to forests as collected. National...

  7. Engaging evaluation research: Reflecting on the process of sexual assault/domestic violence protocol evaluation research

    Directory of Open Access Journals (Sweden)

    Mavis Morton

    2014-06-01

    Full Text Available In keeping within the theme of CU Expo 2013, ‘Engaging Shared Worlds’, this case study examines and reflects on a complex community-university partnership which developed to conceptualise, design, conduct and communicate evaluation research on one community’s sexual assault and domestic violence protocol. As community-university partners coming together for the first time, we reflect on the purpose of our engagement, the characteristics and principles which define our partnership and our potential to teach graduate students how to undertake community-engaged scholarship. Keywords: Community-engaged research, evaluation research, complex community-university partnerships, scholarship of engagement, practice research

  8. ARM Climate Research Facility Quarterly Value-Added Product Report

    Energy Technology Data Exchange (ETDEWEB)

    Sivaraman, C. [DOE ARM Climate Research Facility, Washington, DC (United States)

    2016-10-01

    The purpose of this report is to provide a concise status update for Value-Added Products (VAPs) implemented by the Atmospheric Radiation Measurement (ARM) Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun; (2) progress on existing VAPs; (3) future VAPs that have been recently approved; (4) other work that leads to a VAP; (5) top requested VAPs from the ARM Data Archive; and (6) a summary of VAP and data releases to production and evaluation. New information is highlighted in blue text. New information about processed data by the developer is highlighted in red text. The upcoming milestones and dates are highlighted in green.

  9. Recent technology products from Space Human Factors research

    Science.gov (United States)

    Jenkins, James P.

    1991-01-01

    The goals of the NASA Space Human Factors program and the research carried out concerning human factors are discussed with emphasis given to the development of human performance models, data, and tools. The major products from this program are described, which include the Laser Anthropometric Mapping System; a model of the human body for evaluating the kinematics and dynamics of human motion and strength in microgravity environment; an operational experience data base for verifying and validating the data repository of manned space flights; the Operational Experience Database Taxonomy; and a human-computer interaction laboratory whose products are the display softaware and requirements and the guideline documents and standards for applications on human-computer interaction. Special attention is given to the 'Convoltron', a prototype version of a signal processor for synthesizing the head-related transfer functions.

  10. Making online products more tangible : the effect of product presentation formats on product evaluations

    NARCIS (Netherlands)

    Verhagen, Tibert; Vonkeman, Charlotte; van Dolen, Willemijn

    2016-01-01

    Although several studies have looked at the effects of online product presentations on consumer decision making, no study thus far has considered a potential key factor in online product evaluations: tangibility. The present study aims at filling this gap by developing and testing a model that

  11. Nondestructive methods for quality evaluation of livestock products.

    Science.gov (United States)

    Narsaiah, K; Jha, Shyam N

    2012-06-01

    The muscles derived from livestock are highly perishable. Rapid and nondestructive methods are essential for quality assurance of such products. Potential nondestructive methods, which can supplement or replace many of traditional time consuming destructive methods, include colour and computer image analysis, NIR spectroscopy, NMRI, electronic nose, ultrasound, X-ray imaging and biosensors. These methods are briefly described and the research work involving them for products derived from livestock is reviewed. These methods will be helpful in rapid screening of large number of samples, monitoring distribution networks, quick product recall and enhance traceability in the value chain of livestock products. With new developments in the areas of basic science related to these methods, colour, image processing, NIR spectroscopy, biosensors and ultrasonic analysis are expected to be widespread and cost effective for large scale meat quality evaluation in near future.

  12. Product Design: Research Trends and an Agenda for the Future

    NARCIS (Netherlands)

    Di Benedetto, A.C.

    2012-01-01

    Academic research in product design is growing in popular- ity, and new challenging research questions are emerging. This article explores several of these product design research issues. We first explore the role of design as a driver of innovation and as a strategic resource to senior managers for

  13. An Analysis of Female Research Productivity in Nigerian Universities

    Science.gov (United States)

    Ogbogu, Christiana O.

    2009-01-01

    This study examines the research output of female staff and the factors that affect their research productivity in the Nigerian university system. The study was carried out with a view to promoting strategies that will enhance productivity and increase the research output of female staff in Nigerian universities. The study adopted a survey…

  14. Research on evaluation techniques for immersive multimedia

    Science.gov (United States)

    Hashim, Aslinda M.; Romli, Fakaruddin Fahmi; Zainal Osman, Zosipha

    2013-03-01

    Nowadays Immersive Multimedia covers most usage in tremendous ways, such as healthcare/surgery, military, architecture, art, entertainment, education, business, media, sport, rehabilitation/treatment and training areas. Moreover, the significant of Immersive Multimedia to directly meet the end-users, clients and customers needs for a diversity of feature and purpose is the assembly of multiple elements that drive effective Immersive Multimedia system design, so evaluation techniques is crucial for Immersive Multimedia environments. A brief general idea of virtual environment (VE) context and `realism' concept that formulate the Immersive Multimedia environments is then provided. This is followed by a concise summary of the elements of VE assessment technique that is applied in Immersive Multimedia system design, which outlines the classification space for Immersive Multimedia environments evaluation techniques and gives an overview of the types of results reported. A particular focus is placed on the implications of the Immersive Multimedia environments evaluation techniques in relation to the elements of VE assessment technique, which is the primary purpose of producing this research. The paper will then conclude with an extensive overview of the recommendations emanating from the research.

  15. Worldwide research productivity on tramadol: a bibliometric analysis.

    Science.gov (United States)

    Sweileh, Waleed M; Shraim, Naser Y; Zyoud, Sa'ed H; Al-Jabi, Samah W

    2016-01-01

    Pain management and safe use of analgesics is an important medical issue. Tramadol is an old analgesic with controversial properties. Evaluation of worldwide scientific output on tramadol has not been explored. Therefore, the main objective of this study was to give a bibliometric overview of global research productivity on tramadol. SciVerse Scopus was used to retrieve and quantitatively and qualitatively analyze worldwide publications on tramadol. A total of 2059 original and review research articles on tramadol were retrieved from Scopus. Forty-six documents (2.23 %) were published in Anesthesia and Analgesia Journal whereas 30 (1.46 %) were published in Arzneimittel Forschung Drug Research Journal. Retrieved tramadol documents were published from 71 countries and appeared in 160 peer reviewed journals. Although the United States of America (259; 12.86 %) had the largest contribution to tramadol publications; the contribution by other countries like Turkey (232; 11.27) India (189; 8.09 %) and Germany (176; 8.56 % was not far away from that of USA. The most productive institution was Grunenthal, Germany (47; 2.28 %) followed by Tehran University of Medical Sciences, Iran (29; 1.41 %), and, Ortho-McNeil Pharmaceutical Incorporated, USA (25; 1.21 %). Of the 2059 documents, there were 370 documents about dependence. The leading institution in documents pertaining to tramadol dependence was Grunenthal GmbH (18; 4.86 %) followed by Ortho-McNeil Pharmaceutical Incorporated (17; 4.59 %). The current study showed that there is an obvious interest in tramadol research. More efforts are needed to clarify the abuse potential and safety profile of tramadol to help in determining the legal status of tramadol. Collaboration among pharmaceutical industry, clinical researchers and academic institutions can improve research quantity and quality on tramadol.

  16. Fenestration System Performance Research, Testing, and Evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Jim Benney

    2009-11-30

    The US DOE was and is instrumental to NFRC's beginning and its continued success. The 2005 to 2009 funding enables NFRC to continue expanding and create new, improved ratings procedures. Research funded by the US DOE enables increased fenestration energy rating accuracy. International harmonization efforts supported by the US DOE allow the US to be the global leader in fenestration energy ratings. Many other governments are working with the NFRC to share its experience and knowledge toward development of their own national fenestration rating process similar to the NFRC's. The broad and diverse membership composition of NFRC allows anyone with a fenestration interest to come forward with an idea or improvement to the entire fenestration community for consideration. The NFRC looks forward to the next several years of growth while remaining the nation's resource for fair, accurate, and credible fenestration product energy ratings. NFRC continues to improve its rating system by considering new research, methodologies, and expanding to include new fenestration products. Currently, NFRC is working towards attachment energy ratings. Attachments are blinds, shades, awnings, and overhangs. Attachments may enable a building to achieve significant energy savings. An NFRC rating will enable fair competition, a basis for code references, and a new ENERGY STAR product category. NFRC also is developing rating methods to consider non specular glazing such as fritted glass. Commercial applications frequently use fritted glazing, but no rating method exists. NFRC is testing new software that may enable this new rating and contribute further to energy conservation. Around the world, many nations are seeking new energy conservation methods and NFRC is poised to harmonize its rating system assisting these nations to better manage and conserve energy in buildings by using NFRC rated and labeled fenestration products. As this report has shown, much more work needs to be

  17. Faculty research productivity and organizational structure in schools of nursing.

    Science.gov (United States)

    Kohlenberg, E M

    1992-01-01

    The purpose of this study was to identify the relationship between faculty research productivity and organizational structure in schools of nursing. The need for nursing research has been widely recognized by members of the nursing profession, yet comparatively few engage in conducting research. Although contextual variables have been investigated that facilitate or inhibit nursing research, the relationship between organizational structure and nursing research productivity has not been examined. This problem was examined within the context of the Entrepreneurial Theory of Formal Organizations. A survey methodology was used for data collection. Data on individual faculty research productivity and organizational structure in the school of nursing were obtained through the use of a questionnaire. A random sample of 300 faculty teaching in 60 master's and doctoral nursing schools in the United States was used. The instruments for data collection were Wakefield-Fisher's Adapted Scholarly Productivity Index and Hall's Organizational Inventory. The data were analyzed using Pearson Product-Moment Correlation Coefficients and multiple correlation/regression techniques. The overall relationship between faculty research productivity and organizational structure in schools of nursing was not significant at the .002 level of confidence. Although statistically significant relationships were not identified, scholarly research productivity and its subscale prepublication and research activities tended to vary positively with procedural specifications in a highly bureaucratic organizational structure. Further research may focus on identification of structural variables that support highly productive nurse researchers.

  18. Report on evaluation of research and development of combined production systems aided by superhighly functional laser. Evaluation; Chokoseino laser oyo fukugo seisan system no kenkyu kaihatsu ni kansuru hyoka hokokusho. Hyokahen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-08-01

    Described herein are combined production systems, capable of flexibly, quickly producing diversified types of machine members in small quantities in an integrated manner from raw stock processing to assembling/inspection. Development of the related techniques, including those for development of lasers of high output, has been implemented in an integrated manner for development of optical members, processing techniques and so on. The techniques developed by this project are expected to be applicable to various industrial purposes, because of their high synergistic effects. There was no oscillator of high output, when the project was started. This project has reduced device size and cost and improved their reliability, greatly contributing to expanded use of lasers. The solid-state lasers have been developed, not only for growing large-size crystals but also for transmission of light. The automation guidelines for assembling and inspection steps, which heavily depended on manual works, have been drawn. The machining functions have been improved by incorporating the processing techniques aided by lasers of high or medium output. One of the major problems involved in the conventional system is very time-consuming works required for establishing the software for the computer by which it is aided for operation. This problem has been solved by providing the modular structure machines developed by this project with flexibility of machining machine. (NEDO)

  19. Wood bioenergy and soil productivity research

    Science.gov (United States)

    D. Andrew Scott; Deborah S. Page-Dumroese

    2016-01-01

    Timber harvesting can cause both short- and long-term changes in forest ecosystem functions, and scientists from USDA Forest Service (USDA FS) have been studying these processes for many years. Biomass and bioenergy markets alter the amount, type, and frequency at which material is harvested, which in turn has similar yet specific impacts on sustainable productivity....

  20. Visual soil evaluation and soil compaction research

    DEFF Research Database (Denmark)

    M.L. Guimarães, Rachel; Keller, Thomas; Munkholm, Lars Juhl

    2017-01-01

    Following on from discussions that took place during the 19th International Conference of the International Soil Tillage Research Organization (ISTRO) in Montevideo, Uruguay, in 2012, the ISTRO working groups “Visual Soil Examination and Evaluation” (VSEE) and “Subsoil Compaction” decided...... to organize a joint workshop. The present special issue is an outcome from the workshop on “Soil structural quality of tropical soils: Visual evaluation methods and soil compaction prevention strategies” that was held 26–29 May 2014 in Maringá, Paraná, Brazil. There has been a long-lasting interest in Visual...... Soil Evaluation (VSE). An ISTRO working group was established more than 30 years ago with the objectives to exchange knowledge and experiences on field methods of visual-tactile soil assessment and to foster international cooperation on new or refined methods. The three previous meeting of the group...

  1. Interdisciplinary researches for potential developments of drugs and natural products

    Directory of Open Access Journals (Sweden)

    Arunrat Chaveerach

    2017-04-01

    Full Text Available Developments of drugs or natural products from plants are possibly made, simple to use and lower cost than modern drugs. The development processes can be started with studying local wisdom and literature reviews to choose the plants which have long been used in diverse areas, such as foods, traditional medicine, fragrances and seasonings. Then those data will be associated with scientific researches, namely plant collection and identification, phytochemical screening by gas chromatography-mass spectrometry, pharmacological study/review for their functions, and finally safety and efficiency tests in human. For safety testing, in vitro cell toxicity by cell viability assessment and in vitro testing of DNA breaks by the comet assay in human peripheral blood mononuclear cells can be performed. When active chemicals and functions containing plants were chosen with safety and efficacy for human uses, then, the potential medicinal natural products will be produced. Based on these procedures, the producing cost will be cheaper and the products can be evaluated for their clinical properties. Thus, the best and lowest-priced medicines and natural products can be distributed worldwide.

  2. Interdisciplinary researches for potential developments of drugs and natural products

    Institute of Scientific and Technical Information of China (English)

    Arunrat Chaveerach; Runglawan Sudmoon; Tawatchai Tanee

    2017-01-01

    Developments of drugs or natural products from plants are possibly made,simple to use and lower cost than modern drugs.The development processes can be started with studying local wisdom and literature reviews to choose the plants which have long been used in diverse areas,such as foods,traditional medicine,fragrances and seasonings.Then those data will be associated with scientific researches,namely plant collection and identification,phytochemical screening by gas chromatography-mass spectrometry,pharmacological study/review for their functions,and finally safety and efficiency tests in human.For safety testing,in vitro cell toxicity by cell viability assessment and in vitro testing of DNA breaks by the comet assay in human peripheral blood mononuclear cells can be performed.When active chemicals and functions containing plants were chosen with safety and efficacy for human uses,then,the potential medicinal natural products will be produced.Based on these procedures,the producing cost will be cheaper and the products can be evaluated for their clinical properties.Thus,the best and lowest-priced medicines and natural products can be distributed worldwide.

  3. How Do Trend Researchers Conduct Research? The Production of Knowledge in a Controversial Field

    Directory of Open Access Journals (Sweden)

    Michaela Pfadenhauer

    2004-05-01

    Full Text Available The planned research project described in this article focuses on the methods of trend research—not only in a narrow literal sense of techniques of data collection and data evaluation but also in a broader understanding of the logic of knowledge production in this controversial field. Initially trend research can be appointed between market research on the one hand and futurology on the other hand. Criticism regarding trend research as well as its innovative potential is also mentioned. Following the recent studies, trend research is conceived as application-oriented research in a broad sense. As far as the methodology is concerned, the proposed study promises to be an empirically-founded contribution by integrating analysis from sources such as explorative and focused conversations, observations and expert interviews. The study uses the example of trend research and asks the question how research is actually "done" and if it is application oriented or not. URN: urn:nbn:de:0114-fqs0402366

  4. Automatic map generalisation from research to production

    Science.gov (United States)

    Nyberg, Rose; Johansson, Mikael; Zhang, Yang

    2018-05-01

    The manual work of map generalisation is known to be a complex and time consuming task. With the development of technology and societies, the demands for more flexible map products with higher quality are growing. The Swedish mapping, cadastral and land registration authority Lantmäteriet has manual production lines for databases in five different scales, 1 : 10 000 (SE10), 1 : 50 000 (SE50), 1 : 100 000 (SE100), 1 : 250 000 (SE250) and 1 : 1 million (SE1M). To streamline this work, Lantmäteriet started a project to automatically generalise geographic information. Planned timespan for the project is 2015-2022. Below the project background together with the methods for the automatic generalisation are described. The paper is completed with a description of results and conclusions.

  5. Productivity Research and Development Planning Workshop.

    Science.gov (United States)

    1986-03-01

    mission. These ideas must come from everyone in all echelons of the Comand. The MAC quality of worklife efforts consist of quality circles, labor-manage...that would not have been captured by the measure as initially formulated by the PIG. The balance of the plan and recommenda- tions made by the PMWG...people are doing things. We have the suggestion program, the quality of worklife program, and the Tech Mod program. All of these programs are productivity

  6. Sources of Research Ideas Among Productive Scholars. Implications for Administrators

    Science.gov (United States)

    Glueck, William F.; Jauch, Lawrence R.

    1975-01-01

    Administrators wishing to stimulate research productivity should try to lure the most creative researchers but should also put emphasis on libraries and information retrieval services, and funds to attend professional meetings. (Editor)

  7. Electrocatalysis research for fuel cells and hydrogen production

    CSIR Research Space (South Africa)

    Mathe, MK

    2012-01-01

    Full Text Available The CSIR undertakes research in the Electrocatalysis of fuel cells and for hydrogen production. The Hydrogen South Africa (HySA) strategy supports research on electrocatalysts due to their importance to the national beneficiation strategy. The work...

  8. Social Context in Usability Evaluations: Concepts, Processes and Products

    DEFF Research Database (Denmark)

    Jensen, Janne Jul

    social context is considered important, only little research has been done to identify how it influences usability evaluations. In this thesis I explore how social context affects the process and product of a usability evaluation and explain the findings in terms of the theory of behaviour settings...... leader) and non-operatives (members, spectators, neutrals and potentials) from the theory of behaviour settings to usability evaluations generates an understanding and create an awareness of the level of power possessed by each of the participants in the social context. 2. On the operative level...... and a field experiment. Findings from these activities are presented in five published paper contributions. I furthermore introduce the theory of behaviour settings as a tool to help characterise the key concepts of social context which, together with an understanding of usability evaluations, provide...

  9. Evaluating research impact: the development of a ‘RESEARCH for IMPACT’ TOOL

    Directory of Open Access Journals (Sweden)

    Komla Tsey

    2016-08-01

    Full Text Available Introduction: This paper describes the development of a ‘Research for Impact’ Tool against a background of concerns about the over-researching of Aboriginal and Torres Strait Islander people’s issues without demonstrable benefits.Material and Methods: A combination of literature reviews, workshops with researchers and reflections by project team members and partners using participatory snowball techniques.Results: Assessing research impact is difficult, akin to so-called ‘wicked problem’, but not impossible. Heuristic and collaborative approach to research that takes in the expectations of research users, those being researched and the funders of research offers a pragmatic solution to evaluating research impact. The proposed ‘Research for Impact’ Tool is based on the understanding that the value of research is to create evidence and/or products to support smarter decisions so as to improve the human condition.Research is of limited value unless the evidence produced is used to inform smarter decisions. A practical way of approaching research impact is therefore to start with the decisions confronting decision makers whether they are government policymakers, professional practitioners or households and the extent to which the research supports smarter decisions and the knock-on consequences of such smart decisions. Embedded at each step in the impact planning, monitoring and evaluation process is the need for Indigenous leadership and participation, capacity enhancement and collaborative partnerships and participatory learning by doing approaches across partners.Discussion: The tool is designed in the context of Indigenous research but the basic idea that the way to assess research impact is to start upfront by defining the users’ of research and their information needs, the decisions confronting them and the extent to which research informs smarter decisions is equally applicable to research in other settings, both applied and

  10. The effective management of medical isotope production in research reactors

    International Nuclear Information System (INIS)

    Drummond, D.T.

    1993-01-01

    During the 50-yr history of the use of radioisotopes for medical applications, research reactors have played a pivotal role in the production of many if not most of the key products. The marriage between research reactors and production operations is subject to significant challenges on two fronts. The medical applications of the radioisotope products impose some unique constraints and requirements on the production process. In addition, the mandates and priorities of a research reactor are not always congruent with the demands of a production environment. This paper briefly reviews the historical development of medical isotope production, identifies the unique challenges facing this endeavor, and discusses the management of the relationship between the isotope producer and the research reactor operator. Finally, the key elements of a successful relationship are identified

  11. CATTLE PRODUCTIVE PERFORMANCE EVALUATION CONFINED SUBMITTED IMMUNOCASTRATION

    Directory of Open Access Journals (Sweden)

    J. M. Maluf

    2016-09-01

    Full Text Available In order to evaluate the performance and carcass characteristics of cattle cross breeds ½ Aberdeen Angus x ½Nelore and Nelore confined submitted to immunocastration 218 male animals were used, feedlot, averaging 342 kg, divided into three experimental groups, T1: 117 steers ½ Angus x ½ Nelore no castrated (ANC, T2: 51 Nelore steers uncastrated (NNC and T3: 50 Nellore steers immunocastrated (NIC. The experiment lasted 144 days of confinement. The selection of animals for group formation was according to the individual weight, breed, sex condition and age. For immunocastration it wasused Bopriva® vaccine. The rating was finished according to the parameter used by the meatpacking industry ranging from 1 to 5. The experimental design was completely randomized in three groups. For the analyzes the variables studied statistics were submitted to analysis of variance (ANOVA and Tukey test both at the 5% level of significance. The results showed differences (p <0.01 at various features of productive performance and carcass between treatments. For slaughter weight, the ANC animals were higher (with 582.1 kg to Nelore, regardless of sexual condition, and the NNC were in turn heavier than the NIC, 527.4 and 503.7 respectively. Finally, it observed that the use of immunocastration in Nellore animals provided a decrease in productive performance of confined animals, but provided better finish carcass similar to crossbred (ANC.

  12. Animal Production Research Advances: Advanced Search

    African Journals Online (AJOL)

    Search tips: Search terms are case-insensitive; Common words are ignored; By default only articles containing all terms in the query are returned (i.e., AND is implied); Combine multiple words with OR to find articles containing either term; e.g., education OR research; Use parentheses to create more complex queries; e.g., ...

  13. Plant Products Research Journal: Advanced Search

    African Journals Online (AJOL)

    Search tips: Search terms are case-insensitive; Common words are ignored; By default only articles containing all terms in the query are returned (i.e., AND is implied); Combine multiple words with OR to find articles containing either term; e.g., education OR research; Use parentheses to create more complex queries; e.g., ...

  14. Using market research for product line development.

    Science.gov (United States)

    Bowie, B H; Kivney, N

    1993-08-01

    A marketing research study determined patient needs and wants in order to tailor services within a family maternity care unit. In addition, an educational program, implemented in an effort to change the behavior of the caregivers in the clinical area, is described.

  15. 7 CFR 917.39 - Production research, market research and development.

    Science.gov (United States)

    2010-01-01

    ... establish or provide for the establishment of production research, marketing research, and development... 7 Agriculture 8 2010-01-01 2010-01-01 false Production research, market research and development...) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF...

  16. 7 CFR 925.45 - Production research and market research and development.

    Science.gov (United States)

    2010-01-01

    ... Secretary, may establish or provide for the establishment of production research, marketing research and... 7 Agriculture 8 2010-01-01 2010-01-01 false Production research and market research and...) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF...

  17. Health services research evaluation principles. Broadening a general framework for evaluating health information technology.

    Science.gov (United States)

    Sockolow, P S; Crawford, P R; Lehmann, H P

    2012-01-01

    Our forthcoming national experiment in increased health information technology (HIT) adoption funded by the American Recovery and Reinvestment Act of 2009 will require a comprehensive approach to evaluating HIT. The quality of evaluation studies of HIT to date reveals a need for broader evaluation frameworks that limits the generalizability of findings and the depth of lessons learned. Develop an informatics evaluation framework for health information technology (HIT) integrating components of health services research (HSR) evaluation and informatics evaluation to address identified shortcomings in available HIT evaluation frameworks. A systematic literature review updated and expanded the exhaustive review by Ammenwerth and deKeizer (AdK). From retained studies, criteria were elicited and organized into classes within a framework. The resulting Health Information Technology Research-based Evaluation Framework (HITREF) was used to guide clinician satisfaction survey construction, multi-dimensional analysis of data, and interpretation of findings in an evaluation of a vanguard community health care EHR. The updated review identified 128 electronic health record (EHR) evaluation studies and seven evaluation criteria not in AdK: EHR Selection/Development/Training; Patient Privacy Concerns; Unintended Consequences/ Benefits; Functionality; Patient Satisfaction with EHR; Barriers/Facilitators to Adoption; and Patient Satisfaction with Care. HITREF was used productively and was a complete evaluation framework which included all themes that emerged. We can recommend to future EHR evaluators that they consider adding a complete, research-based HIT evaluation framework, such as HITREF, to their evaluation tools suite to monitor HIT challenges as the federal government strives to increase HIT adoption.

  18. 47 CFR 7.7 - Product design, development, and evaluation.

    Science.gov (United States)

    2010-10-01

    ...: (1) Where market research is undertaken, including individuals with disabilities in target populations of such research; (2) Where product design, testing, pilot demonstrations, and product trials are... access solutions through testing with individuals with disabilities or with appropriate disability...

  19. Research in biomass production and utilization: Systems simulation and analysis

    Science.gov (United States)

    Bennett, Albert Stewart

    of a mobile juice harvester is not economically viable due to low sugar recovery. The addition of front-end stalk processing/pressing equipment into existing ethanol facilities was found to be economically viable when combined with the plants' use of residuals as a natural gas fuel replacement. Because of high loss of fermentable carbohydrates during ensilage, storage of sweet sorghum in bunkers was not found to be economically viable. The fourth section looks at double cropping winter triticale with late-planted summer corn and compares these scenarios to traditional single cropped corn. Double cropping systems show particular promise for co-production of grain and biomass feedstocks and potentially can allow for greater utilization of grain crop residues. However, additional costs and risks associated with producing two crops instead of one could make biomass-double crops less attractive for producers despite productivity advantages. Detailed evaluation and comparisons show double cropped triticale-corn to be at a significant economic disadvantage relative to single crop corn. The cost benefits associated with using less equipment combined with availability of risk mitigating crop insurance and government subsidies will likely limit farmer interest and clearly indicate that traditional single-crop corn will provide greater financial returns to management. To evaluate the various sweet sorghum, single crop corn and double cropped triticale-corn production scenarios, a detailed but generic model was developed. The primary goal of this generic approach was to develop a modeling foundation that can be rapidly adapted, by an experienced user, to describe new and existing biomass and crop production scenarios that may be of interest to researchers. The foundation model allows input of management practices, crop production characteristics and utilizes standardized machinery performance and cost information, including farm-owned machinery and implements, and machinery and

  20. Research on Digital Product Modeling Key Technologies of Digital Manufacturing

    Institute of Scientific and Technical Information of China (English)

    DING Guoping; ZHOU Zude; HU Yefa; ZHAO Liang

    2006-01-01

    With the globalization and diversification of the market and the rapid development of Information Technology (IT) and Artificial Intelligence (AI), the digital revolution of manufacturing is coming. One of the key technologies in digital manufacturing is product digital modeling. This paper firstly analyzes the information and features of the product digital model during each stage in the product whole lifecycle, then researches on the three critical technologies of digital modeling in digital manufacturing-product modeling, standard for the exchange of product model data and digital product data management. And the potential signification of the product digital model during the process of digital manufacturing is concluded-product digital model integrates primary features of each stage during the product whole lifecycle based on graphic features, applies STEP as data exchange mechanism, and establishes PDM system to manage the large amount, complicated and dynamic product data to implement the product digital model data exchange, sharing and integration.

  1. Marketing research: Pathway to optimal market oriented products ...

    African Journals Online (AJOL)

    This paper examines the role of marketing research as pathway to developing optimal market oriented products. The objectives of this paper among others are to (i) Establish whether the use of marketing research has effect on new product adoption process by consumers (ii) Find out if there is any relationship between the ...

  2. Identifying and Researching Market Opportunities for New High Technology Products.

    Science.gov (United States)

    Dunstan, Peter

    Using a product called the synchro-pulse welder as a case study example, this paper discusses the activities of CSIRO (Commonwealth Scientific and Industrial Research Organisation) in identifying and marketing new high-technology products. A general discussion of CSIRO's market research plans includes two goals to be attained within the next 5…

  3. Actinide Foil Production for MPACT Research

    Energy Technology Data Exchange (ETDEWEB)

    Beller, Denis

    2012-10-30

    Sensitive fast-neutron detectors are required for use in lead slowing down spectrometry (LSDS), an active interrogation technique for used nuclear fuel assay for Materials Protection, Accounting, and Controls Technologies (MPACT). During the past several years UNLV sponsored a research project at RPI to investigate LSDS; began development of fission chamber detectors for use in LSDS experiments in collaboration with INL, LANL, and Oregon State U.; and participated in a LSDS experiment at LANL. In the LSDS technique, research has demonstrated that these fission chamber detectors must be sensitive to fission energy neutrons but insensitive to thermal-energy neutrons. Because most systems are highly sensitive to large thermal neutron populations due to the well-known large thermal cross section of 235U, even a miniscule amount of this isotope in a fission chamber will overwhelm the small population of higher-energy neutrons. Thus, fast-fission chamber detectors must be fabricated with highly depleted uranium (DU) or ultra-pure thorium (Th), which is about half as efficient as DU. Previous research conducted at RPI demonstrated that the required purity of DU for assay of used nuclear fuel using LSDS is less than 4 ppm 235U, material that until recently was not available in the U.S. In 2009 the PI purchased 3 grams of ultra-depleted uranium (uDU, 99.99998% 238U with just 0.2 ± 0.1 ppm 235U) from VNIIEF in Sarov, Russia. We received the material in the form of U3O8 powder in August of 2009, and verified its purity and depletion in a FY10 MPACT collaboration project. In addition, chemical processing for use in FC R&D was initiated, fission chamber detectors and a scanning alpha-particle spectrometer were developed, and foils were used in a preliminary LSDS experiment at a LANL/LANSCE in Sept. of 2010. The as-received U3O8 powder must be chemically processed to convert it to another chemical form while maintaining its purity, which then must be used to electro-deposit U

  4. Factors affecting research productivity of production and operations management groups: An empirical study

    OpenAIRE

    George C. Hadjinicola; Andreas C. Soteriou

    2006-01-01

    This paper identifies factors that promote research productivity of production and operations management (POM) groups of researchers in US business schools. In this study, research productivity of a POM group is defined as the number of articles published per POM professor in a specific period of time. The paper also examines factors that affect research quality, as measured by the number of articles published per POM professor in journals, which have been recognized in the POM literature as ...

  5. Peat production. Review of research projects; Turvetuotanto. Tutkimusalueen katsaus

    Energy Technology Data Exchange (ETDEWEB)

    Leinonen, A. [VTT Energy, Jyvaeskylae (Finland)

    1997-12-01

    The development target in the research area of peat production is to improve the competitiveness of peat by reducing production costs by 20 % (by FIM 5 - 6/MWh) from the level of the year 1992 and to reduce environmental impacts. The most important research objects by which the target in peat production technology will be achieved are drawing and preparation technology, drying technology, mechanical technology, method technology, integration of wood harvesting and peat production, and the application of the results of the OPTIMITURVE Research Programme in practice. (orig.)

  6. Dialogues between audience research and production

    DEFF Research Database (Denmark)

    Redvall, Eva Novrup

    2017-01-01

    This article offers a historical analysis of the audience testing of television drama from The Danish Broadcasting Corporation (DR) by the in-house DR Media Research Department from the mid-1990s until 2016. The article investigates how the methods for testing have changed from more traditional...... focus groups and surveys to include biometric methods (e.g. skin conductance) to measure audience arousal. While audience testing is often primarily viewed as a quality measurement tool for executives, the article argues that testing can also be a dialogue-based tool offering creative practitioners...

  7. Spelling the Domain of Sustainable Product Innovation Research

    DEFF Research Database (Denmark)

    Boks, Casper; McAloone, Tim C.

    2009-01-01

    on research methodologies used (case study research, explorative research, descriptive or prescriptive research), case studies analysed, and theories used (such as innovation theory, institutional theory, organisational learning, entrepreneurship, technology management, or design theory). A recent survey......- and user thinking, product stewardship, environmental management of industrial systems, integrated product policies, environmental technology transfer, sustainable consumption and corporate social responsibility. A related question is to determine how scientific research on the PhD level has been......, including learning from historical developments, towards future research strategies and their industrial application....

  8. Faculty Research Productivity and Organizational Structure in Schools of Nursing.

    Science.gov (United States)

    Kohlenberg, Eileen Mieras

    1992-01-01

    A sample of 128 of 221 nursing faculty completed a scholarly productivity index and organizational inventory, which did not yield significant relationships between productivity and organizational structure. Productivity and prepublication research activities varied positively with procedural specifications in a highly bureaucratic organizational…

  9. RESEARCH ON CARBON PRODUCTS FROM COAL USING AN EXTRACTIVE PROCESS

    Energy Technology Data Exchange (ETDEWEB)

    Peter G. Stansberry; Alfred H. Stiller; John W. Zondlo; Chong Chen; Brian Bland; David Fenton

    2002-03-31

    This report presents the results of a one-year effort directed at the exploration of the use of coal as a feedstock for a variety of industrially-relevant carbon products. The work was basically divided into three focus areas. The first area dealt with the acquisition of laboratory equipment to aid in the analysis and characterization of both the raw coal and the coal-derived feedstocks. Improvements were also made on the coal-extraction pilot plant which will now allow larger quantities of feedstock to be produced. Mass and energy balances were also performed on the pilot plant in an attempt to evaluate the scale-up potential of the process. The second focus area dealt with exploring hydrogenation conditions specifically aimed at testing several less-expensive candidate hydrogen-donor solvents. Through a process of filtration and vacuum distillation, viable pitch products were produced and evaluated. Moreover, a recycle solvent was also isolated so that the overall solvent balance in the system could be maintained. The effect of variables such as gas pressure and gas atmosphere were evaluated. The pitch product was analyzed and showed low ash content, reasonable yield, good coking value and a coke with anisotropic optical texture. A unique plot of coke yield vs. pitch softening point was discovered to be independent of reaction conditions or hydrogen-donor solvent. The third area of research centered on the investigation of alternate extraction solvents and processing conditions for the solvent extraction step. A wide variety of solvents, co-solvents and enhancement additives were tested with varying degrees of success. For the extraction of raw coal, the efficacy of the alternate solvents when compared to the benchmark solvent, N-methyl pyrrolidone, was not good. However when the same coal was partially hydrogenated prior to solvent extraction, all solvents showed excellent results even for extractions performed at room temperature. Standard analyses of the

  10. Barrier performance researches for the safety evaluation

    International Nuclear Information System (INIS)

    Niibori, Yuichi

    2004-01-01

    So far, many researches were conducted to propose a scientific evidence (a safety case) for the realization of geological disposal in Japan. In order to regulate the geological disposal system of radioactive wastes, on the other hand, we need also a holistic approach to integrate various data related for the performance evaluations of the engineered barrier system and the natural barrier system. However, the scientific bases are not sufficient to establish the safety regulation for such a natural system. For example, we often apply the specific probability density function (PDF) to the uncertainty of barrier system due to the essential heterogeneity. However, the applicability is not clear in the regulation point of view. A viewpoint to understand such an applicability of PDFs has been presented. (author)

  11. Procurement management in scientific research and production project

    International Nuclear Information System (INIS)

    Wan Yi

    2008-01-01

    To meet the requirement of development trend of scientific research and production, it is necessary to incorporate the modern procurement management theory in the whole procurement process for the items used in scientific research and production.This paper provided some suggestions to improve the procurement management by introducing the experiences in the application of the modern procurement management methods in the procurement of parts production. (author)

  12. Products of research and development in NDT

    International Nuclear Information System (INIS)

    Hoeller, P.; Schmitz, V.

    1983-01-01

    The Nondestructive Ultrasonic Testing and Evaluation is directed to describe flaws microstructure, structure residual stress, reliability or quality insurance. An overview is given on the scientific background, interpretation capability based upon mathematic-numerical models, new design of equipments and demonstrated at components containing relevant flaws. Emphasis is laid upon SNR-improvement in the UT of austenitic weldings. Examples are shown using the backscattering technique with linear polarized shear waves. Stress measurements are performed with electromagnetic ultrasonic probes (EMAT). The surface inspection with magnetic imaging of the eddy current field or the multi-frequency eddy current methods are described. The possibilities of detection, classification and reconstruction of flaws are demonstrated in the time- and frequency domain with the satellite pulse echo technique, focal probes and the synthetic aperture methods like ALOK, Phased Array, Holography and SAFT. (orig.)

  13. A bibliometric analysis of scientific production in mesothelioma research.

    Science.gov (United States)

    Ugolini, Donatella; Neri, Monica; Casilli, Cristina; Ceppi, Marcello; Canessa, Pier Aldo; Ivaldi, Giovanni Paolo; Paganuzzi, Michela; Bonassi, Stefano

    2010-11-01

    This study aims at comparing scientific production in malignant mesothelioma (MM) among countries and evaluating publication trends and impact factor (IF). The PubMed database was searched with a strategy combining keywords listed in the Medical Subject Headings and free-text search. Publications numbers and IF were evaluated both as absolute values and after standardization by population and gross domestic product (GDP). 5240 citations were retrieved from the biennium 1951-1952 (n = 22) to 2005-2006 (n = 535). The 177% increase of MM publications from 1987 to 2006 exceeded by large the corresponding value of total cancer literature (123.5%). In these two decades, 2559 articles with IF were published: 46.4% came from the European Union (EU) (the UK, Italy and France ranking at the top), and 36.2% from the US. The highest mean IF was reported for the US (3.346), followed by Australia (3.318), and EU (2.415, with the UK, Belgium and the Netherlands first). Finland, Sweden and Australia had the best ratio between IF (sum) and resident population or GDP. The number of publications correlated with GDP (p = 0.001) and national MM mortality rates (p = 0.002). An association was found between a country commitment to MM research and the burden of disease (p = 0.04). Asbestos, survival, prognosis, occupational exposure, differential diagnosis, and immunohistochemistry were the most commonly used keywords. This report represents the first effort to explore the geographical and temporal distribution of MM research and its determinants. This is an essential step in understanding science priorities and developing disease control policies. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  14. Disability Evaluation Systems Analysis and Research Annual Report 2015

    Science.gov (United States)

    2016-03-21

    Army and Air Force had higher percentages of reserve component disability evaluations, likely due to the inclusion of National Guard service members...Annual Report 2015 Disability Evaluation Systems Analysis and Research Prepared by Accession Medical Standards Analysis and Research Activity...Preventive Medicine Branch Walter Reed Army Institute of Research Silver Spring, Maryland Disability Evaluation Systems Analysis and Research

  15. Disability Evaluation System Analysis and Research Annual Report 2015

    Science.gov (United States)

    2016-03-11

    Inclusion of laboratory and diagnostic information on the medical condition or injury that precipitated the disability evaluation in each service’s...Annual Report 2015 Disability Evaluation Systems Analysis and Research Prepared by Accession Medical Standards Analysis and Research Activity...Preventive Medicine Branch Walter Reed Army Institute of Research Silver Spring, Maryland Disability Evaluation Systems Analysis and Research

  16. VAO Tools Enhance CANDELS Research Productivity

    Science.gov (United States)

    Greene, Gretchen; Donley, J.; Rodney, S.; LAZIO, J.; Koekemoer, A. M.; Busko, I.; Hanisch, R. J.; VAO Team; CANDELS Team

    2013-01-01

    The formation of galaxies and their co-evolution with black holes through cosmic time are prominent areas in current extragalactic astronomy. New methods in science research are building upon collaborations between scientists and archive data centers which span large volumes of multi-wavelength and heterogeneous data. A successful example of this form of teamwork is demonstrated by the CANDELS (Cosmic Assembly Near-infrared Deep Extragalactic Legacy Survey) and the Virtual Astronomical Observatory (VAO) collaboration. The CANDELS project archive data provider services are registered and discoverable in the VAO through an innovative web based Data Discovery Tool, providing a drill down capability and cross-referencing with other co-spatially located astronomical catalogs, images and spectra. The CANDELS team is working together with the VAO to define new methods for analyzing Spectral Energy Distributions of galaxies containing active galactic nuclei, and helping to evolve advanced catalog matching methods for exploring images of variable depths, wavelengths and resolution. Through the publication of VOEvents, the CANDELS project is publishing data streams for newly discovered supernovae that are bright enough to be followed from the ground.

  17. New Product Development and Business Strategy of Research and Development

    International Nuclear Information System (INIS)

    Lee, Sun Cheol

    1998-05-01

    The contents of this book are new product development strategy of the top business, commercialization and new product development, development case analysis and framework of new product development, investigation strategy for idea of new product development, case analysis of research as development and goal of new product development, case analysis and planning and management for new product development, innovative item development and technical management against confusion, the map for determination procedure of development, strategy of market and goods and development strategy cases in leading company.

  18. The Journal of Stored-Products Research: The living history of stored product protection

    Science.gov (United States)

    This year, the Journal of Stored Products Research (JSPR) completes 52 years of history with publications of research papers. With approx. one hundred articles annually, the JSPR is an important scientific forum for stored product researchers throughout the globe. The aims and scope of JSPR are focu...

  19. Making Online Products More Tangible: The Effect of Product Presentation Formats on Product Evaluations.

    Science.gov (United States)

    Verhagen, Tibert; Vonkeman, Charlotte; van Dolen, Willemijn

    2016-07-01

    Although several studies have looked at the effects of online product presentations on consumer decision making, no study thus far has considered a potential key factor in online product evaluations: tangibility. The present study aims at filling this gap by developing and testing a model that relates different online product presentation formats to the three-dimensional concept of product tangibility. We test how the three tangibility dimensions influence perceived diagnosticity and, eventually, online purchase intentions. A between-subjects lab experiment (n = 366) was used to test the hypothesized effects of three common online product presentation formats (pictures vs. 360 spin rotation vs. virtual mirror). The results showed that out of these formats, virtual mirrors were superior in providing a sense of product tangibility, followed by the 360-spin rotation format and static pictures. Furthermore, in terms of predictive validity, two of the three tangibility dimensions significantly increased perceived diagnosticity, which, in turn, positively and strongly affected purchase intentions. Overall, our results add to previous works studying the relationships between online product presentation formats and consumer decision making. Also, they hold value for online practitioners by highlighting the potential benefits of applying technologically advanced product presentation formats such as the virtual mirror.

  20. Market research companies and new product development tools

    NARCIS (Netherlands)

    Nijssen, E.J.; Frambach, R.T.

    1998-01-01

    This research investigates (1) the share of new product development (NPD) research services in market research (MR) companies’ turnover, (2) MR companies’ awareness and use of NPD tools and the modifications made to these NPD tools, and (3) MR company managers’ perceptions of the influence of client

  1. Market research companies and new product development tools

    NARCIS (Netherlands)

    Nijssen, Edwin J.; Frambach, Ruud T.

    1998-01-01

    This research investigates (1) the share of new product development (NPD) research services in market research (MR) companies' turnover, (2) MR companies' awareness and use of NPD tools and the modifications made to these NPD tools, and (3) MR company managers' perceptions of the influence of client

  2. Properly Evaluating load-following products

    Energy Technology Data Exchange (ETDEWEB)

    Cavicchi, Joseph; Lemon, Andrew

    2009-01-15

    The authors briefly survey the jurisdictions where load-following products have been successfully used, examine the characteristics of the load-following products, and explain the shortcomings and inaccurate conclusions of previous analyses. A more thorough analysis reveals that the load-following products fulfill the public policy objectives for which they have been designed and do not adversely impact wholesale electricity markets.

  3. Considerations for higher efficiency and productivity in research activities.

    Science.gov (United States)

    Forero, Diego A; Moore, Jason H

    2016-01-01

    There are several factors that are known to affect research productivity; some of them imply the need for large financial investments and others are related to work styles. There are some articles that provide suggestions for early career scientists (PhD students and postdocs) but few publications are oriented to professors about scientific leadership. As academic mentoring might be useful at all levels of experience, in this note we suggest several key considerations for higher efficiency and productivity in academic and research activities. More research is needed into the main work style features that differentiate highly productive scientists and research groups, as some of them could be innate and others could be transferable. As funding agencies, universities and research centers invest large amounts of money in order to have a better scientific productivity, a deeper understanding of these factors will be of high academic and societal impact.

  4. Evaluation of Environmental Quality Productive Ecosystem Guayas (Ecuador).

    Science.gov (United States)

    Pozo, Wilson; Pardo, Francisco; Sanfeliu, Teófilo; Carrera, Gloria; Jordan, Manuel; Bech, Jaume; Roca, Núria

    2015-04-01

    Natural resources are deteriorating very rapidly in the Gulf of Guayaquil and the area of influence in the Guayas Basin due to human activity. Specific problems are generated by the mismanagement of the aquaculture industry affecting the traditional agricultural sectors: rice, banana, sugarcane, cocoa, coffee, and soya also studied, and by human and industrial settlements. The development of industrial activities such as aquaculture (shrimp building for shrimp farming in ponds) and agriculture, have increasingly contributed to the generation of waste, degrading and potentially toxic elements in high concentrations, which can have adverse effects on organisms in the ecosystems, in the health of the population and damage the ecological and environmental balance. The productive Guayas ecosystem, consists of three interrelated ecosystems, the Gulf of Guayaquil, the Guayas River estuary and the Guayas Basin buffer. The objective of this study was to evaluate the environmental quality of the productive Guayas ecosystem (Ecuador), through operational and specific objectives: 1) Draw up the transition coastal zone in the Gulf of Guayaquil, 2) Set temporal spatial variability of soil salinity in wetlands rice, Lower Guayas Basin, 3) evaluate the heavy metals in wetland rice in the Lower Basin of Guayas. The physical and chemical parameters of the soils have been studied. These are indicators of environmental quality. The multivariate statistical method showed the relations of similarities and dissimilarities between variables and parameter studies as stable. Moreover, the boundaries of coastal transition areas, temporal spatial variability of soil salinity and heavy metals in rice cultivation in the Lower Basin of Guayas were researched. The sequential studies included and discussed represent a broad framework of fundamental issues that has been valued as a basic component of the productive Guayas ecosystem. They are determinants of the environmental quality of the Guayas

  5. Radioisotope production experience at the Cintichem 5-MW research reactor

    International Nuclear Information System (INIS)

    McGovern, J.J.

    1993-01-01

    The Cintichem radiochemical production facility was constructed in the late 1950s and became operational in October of 1961. The facility was originally designed and constructed by Union Carbide Corporation for research and development of nuclear technology with the ultimate objective of exploiting it commercially. Research projects were conducted in the fields of direct energy conversion for the production of electric power and chemical synthesis, neutron spectrometry, nuclear fuel cycle development, and radiochemical production. Radiochemical production for medical applications was the only development project that was successfully commercialized

  6. Country-of-origin effects on consumer product evaluations

    NARCIS (Netherlands)

    Verlegh, Peeter W J

    2001-01-01

    This thesis aims to gain a better understanding of the influence of the country-of-origin of products on consumers' product evaluation. A literature study and meta-analysis reveal a multitude of ways in which country-of-origin can influence product evaluations. The country-of-origin has a

  7. Evaluation of NIPER thermal EOR research, state-of-the-art and research needs

    Energy Technology Data Exchange (ETDEWEB)

    Sarathi, P.S.; Olsen, D.K.; Mahmood, S.M.; Ramzel, E.B.

    1993-06-01

    The Thermal Oil Production Research Group at NIPER has conducted research on behalf of the US Department of Energy on thermal methods of oil production (steam and for 1 year, in situ combustion) since 1983. Research projects performed by this group have attempted to adapt to the needs and direction of the DOE`s oil research program and that of industry. This report summarizes the research that has been conducted, analyses the contributions of the research, describes how the technology was transferred to potential users, analyzes current trends in thermal research and thermal oil production, and makes suggestions for future research where NIPER could contribute to advances in thermal oil production.

  8. Status of anesthesiology resident research education in the United States: structured education programs increase resident research productivity.

    Science.gov (United States)

    Ahmad, Shireen; De Oliveira, Gildasio S; McCarthy, Robert J

    2013-01-01

    The enhancement of resident research education has been proposed to increase the number of academic anesthesiologists with the skills and knowledge to conduct meaningful research. Program directors (PDs) of the U.S. anesthesiology residency programs were surveyed to evaluate the status of research education during residency training and to test the hypothesis that structured programs result in greater resident research productivity based on resident publications. Survey responses were solicited from 131 anesthesiology residency PDs. Seventy-four percent of PDs responded to the survey. Questions evaluated department demographic information, the extent of faculty research activity, research resources and research funding in the department, the characteristics of resident research education and resident research productivity, departmental support for resident research, and perceived barriers to resident research education. Thirty-two percent of programs had a structured resident research education program. Structured programs were more likely to be curriculum based, require resident participation in a research project, and provide specific training in presentation and writing skills. Productivity expectations were similar between structured and nonstructured programs. Forty percent of structured programs had > 20% of trainees with a publication in the last 2 years compared with 14% of departments with unstructured programs (difference, 26%; 99% confidence interval [CI], 8%-51%; P = 0.01). The percentage of programs that had research rotations for ≥2 months was not different between the structured and the nonstructured programs. A research rotation of >2 months did not increase the percentage of residents who had published an article within the last 2 months compared with a research rotation of 20% of residents with a publication in the last 2 years compared with 36% in programs with >20% of faculty involvement (difference, 21%; 99% CI, -4% to 46%; P = 0.03). Our

  9. Bioenergy Research Programme. Yearbook 1994. Production of wood fuels

    International Nuclear Information System (INIS)

    Alakangas, E.

    1995-01-01

    BIOENERGIA Research Programme is one of energy technology programmes of the Finnish Ministry of Trade and Industry (in 1995 TEKES, Technology Development Center). The aim of Bioenergy Research Programme is to increase the use of economically profitable and environmentally sound bioenergy by improving the competitiveness of present peat and wood fuels. Research and development projects will also develop new economically competitive biofuels and new equipment and methods for production, handling and using of biofuels. The funding for 1994 was nearly 50 million FIM and projects numbered 60. The main goal of the production of wood fuels research area is to develop new production methods in order to decrease the production costs to the level of imported fuels. The total potential of the wood fuel use should be at least 1.0 million toe/a (5.5 million m 3 ). There were 27 projects in 1994 for research on wood fuel production. This part of the yearbook 1994 presents the main results of these projects. The wood reserves do not limit the obtainability of the target. Research and development work has, however, directed to development of equipment and research on wood fuels production chains. Many devices, designed for both separate and integrated production of wood fuels became ready or were becoming ready for prototyping, to be used for production tests. Results of the biomass harvesting and properties research were obtained for utilization in 1994. According to the results it is possible to obtain the desired targets both in integrated and separated production of wood fuels. (author)

  10. Ergonomic evaluation of workload by milk production - a bibliometric analysis.

    Science.gov (United States)

    de Oliveira, Claudilaine Caldas; Pereira Moro, Antônio Renato; Ulbricht, Leandra; Belinelli, Marjorie; de Souza, Gilberto F M; Gabriel, Michele; Zattar, Izabel Cristina

    2017-09-21

    The purpose of this study was to select in a structured manner the relevant articles with scientific recognition, and simultaneously identify the characteristics of these publications that may scientifically enrich the theme in a portfolio of papers. The theme involves ergonomics in milk production as a criterion for evaluating and improving organizational performance in the milking sector. The study used ProKnow-C as a theoretical instrument for intervention. The main results show: i) a bibliographic portfolio of 18 items aligned with the view adopted by researchers which served as a theoretical framework for this research; ii) The article entitled "Wrist positions and movements as possible risk factors during machine milking", by Marianne Stål, Gert-Åke Hansson and Ulrich Moritz in 1999 and published in the Journal of Applied Ergonomics presented the highest scientific recognition, iii) the authors highlighted in the bibliographic portfolio or in its references researching the subject are Gert-Åke Hansson, Marianne Stål and Stefan Pinzke, and iv) the International Journal of Industrial Ergonomics shows the highest number of scientific articles in the bibliographic portfolio. The studies selected using the methodology indicate research in ergonomics focused on the production of milk in rural areas, specifically in the milking sector, are generally related to the health and safety of the workers.

  11. The research of the production function of an industrial enterprise

    Directory of Open Access Journals (Sweden)

    Rezepin Alexandr

    2017-01-01

    Full Text Available The article deals with the use of a production function model for the description of production process and the solution of practical problems, such as choice of technological method of production, rational and effective use of invested funds. Analysis of the production process is carried out by the example of Urals Stampings Plant. The analysis consists of two parts. In the first part with the use of regression analysis the production function is evaluated and the elasticity of revenue is calculated on the cost for main types of resources. In the second part of the analysis with the help of artificial neural networks constructing authors investigate the significance of influence the dynamics in the number of production factors and productivity on the physical volume of the issue. In conclusion, the authors provide recommendations for the implementation to increase the level of productivity of the investment strategy for the Urals Stampings Plant.

  12. Plant natural products research in tuberculosis drug discovery and ...

    African Journals Online (AJOL)

    Plant natural products research in tuberculosis drug discovery and development: A situation report ... African Journal of Biotechnology ... tuberculosis (XDR-TB), call for the development of new anti-tuberculosis drugs to combat this disease.

  13. Intrinsic antecedents of academic research productivity of a large ...

    African Journals Online (AJOL)

    Kirstam

    1South Africa faces a host of challenges in its pursuit of research productivity ( ... doctorates in South African higher education institutions, are examples of these ..... A specific tension exists in academic contexts: the tension between teaching.

  14. Customized products and cloud service information system development research

    Directory of Open Access Journals (Sweden)

    Hung Chien-Wen

    2017-01-01

    Full Text Available This study presents a cloud service customized product information system to enable businesses to provide customized product marketing on the Internet to meet consumer demand for customized products. The cloud service of the information system development strategic framework proposed in this study contains three elements: (1 e-commerce services, (2 promotion type modules, and (3 cloud services customized promotional products. In this study, a mining cloud information system to detect customer behavior is proposed. The association rules from relational database design are utilized to mine consumer behavior to generate cross-selling proposals for customer products and marketing for a retailing mall in Taiwan. The study is composed of several parts, as follows. A market segment and application of association rules in data exploration techniques (Association Rule Mining and sequence-like exploration (Sequential Pattern Mining, efficient analysis of customers, consumer behavior, identification of candidates for promotional products, and using cloud service delivery and evaluation of targets to evaluate candidates for promotional products for production. However, in addition to cloud service customized promotional products, the quantity of promotional products sales varies for different customers. We strive to achieve increased customer loyalty and profits through the use of active cloud service customized promotional products.

  15. Ground-breaking virtual research in product development

    DEFF Research Database (Denmark)

    Søndergaard, Helle Alsted; Jespersen, Kristina Risom; Buck, Nuka

    2008-01-01

    MAPP also focuses on virtual reality. In the research project RIPS - the Role of Information Processing in NPD Strategy - a simulation of a product development process was used as a data collection instrument.......MAPP also focuses on virtual reality. In the research project RIPS - the Role of Information Processing in NPD Strategy - a simulation of a product development process was used as a data collection instrument....

  16. Research governance and scientific knowledge production in The Gambia

    OpenAIRE

    Frederick U. Ozor

    2014-01-01

    Public research institutions and scientists are principal actors in the production and transfer of scientific knowledge, technologies and innovations for application in industry as well for social and economic development. Based on the relevance of science and technology actors, the aim of this study was to identify and explain factors in research governance that influence scientific knowledge production and to contribute to empirical discussions on the impact levels of different governance m...

  17. Research Governance and the Role of Evaluation: A Comparative Study

    Science.gov (United States)

    Molas-Gallart, Jordi

    2012-01-01

    Through a comparative study of the United Kingdom and Spain, this article addresses the effect of different research governance structures on the functioning and uses of research evaluation. It distinguishes three main evaluation uses: distributive, improvement, and controlling. Research evaluation in the United Kingdom plays important…

  18. Faculty Research Productivity: Why Do Some of Our Colleagues Publish More than Others?

    Science.gov (United States)

    Hesli, Vicki L.; Lee, Jae Mook

    2011-01-01

    The justification for studying faculty research productivity is that it affects individual advancement and reputation within academe, as well as departmental and institutional prestige (Creamer 1998, iii). Publication records are an important factor in faculty performance evaluations, research grant awards, and promotion and salary decisions. The…

  19. Approved Drug Products with Therapuetic Equivalence Evaluations (Orange Book)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The publication Approved Drug Products with Therapeutic Equivalence Evaluations (the List, commonly known as the Orange Book) identifies drug products approved on...

  20. Evaluation of methane production features and kinetics of ...

    African Journals Online (AJOL)

    zino

    2015-06-03

    Jun 3, 2015 ... as agricultural fertilizer. In recent years, the conversion of ... few studies investigated the biogas production rate. In the ... evaluate biogas production rate using obtained .... The parameters obtained in the optimization process.

  1. Evaluating Community College Personnel: A Research Report.

    Science.gov (United States)

    Deegan, William L.; And Others

    A statewide survey was conducted of local evaluation policies, procedures, and problems of implementing evaluation programs on the campuses of California community colleges. The following areas were studied: (1) the process of development of the evaluation program; (2) procedures utilized in the first year of implementing Senate Bill 696…

  2. Economic Analysis Of Rabbit Production: On Farm Research ...

    African Journals Online (AJOL)

    The technical data derived from this indicate that technical data are more efficient and dependable in determining production outcomes on the filed relative to survey data. As a result of this, on-farm research was thus suggested as a way by which correct information on cost, returns and profitability of agricultural production ...

  3. Faculty Research Productivity in Hong Kong across Academic Discipline

    Science.gov (United States)

    Jung, Jisun

    2012-01-01

    This study examines the research productivity of Hong Kong academics. Specifically, it explores the individual and institutional factors that contribute to their productivity while also comparing determinants across academic disciplines. We have conducted OLS regression analysis using the international survey data from "The Changing Academics…

  4. Fission product source term research at Oak Ridge National Laboratory

    International Nuclear Information System (INIS)

    Malinauskas, A.P.

    1985-01-01

    The purpose of this work is to describe some of the research being performed at ORNL in support of the effort to describe, as realistically as possible, fission product source terms for nuclear reactor accidents. In order to make this presentation manageable, only those studies directly concerned with fission product behavior, as opposed to thermal hydraulics, accident sequence progression, etc., will be discussed

  5. Report on evaluation of research and development of combined production systems aided by superhigh-functional lasers. Abstract; Chokoseino laser oyo fukugo seisan system no kenkyu kaihatsu ni kansuru hyoka hokokusho. Gaiyohen

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1985-04-01

    This research and development project is aimed at development of combined production systems, which can flexibly, quickly process metallic stock materials in an integrated manner, with the objectives to promote rationalization and manpower saving for producing diversified types of machine parts in small quantities. Application of laser techniques to metal processing area is another objective of this project. The techniques to be developed by this project include those for system designing/controlling to integrate/combine the steps of processing and cutting stock materials, assembling the parts, and heat treatment and examination of the assemblies; for diversified types of cutting/processing by the mechanisms in which exchangeable constituent elements are assembled; for diversified types of processing shaped stock materials by the mechanisms in which molds and rolls are integrated; for diversified types of automatic assembling and transfer; for applying lasers to cutting, welding, heat treatment and measurement; for precision compensation and failure prediction by automatically diagnosing working conditions throughout the system; and for designs and production management for efficient production. The test plant has started general trial operation. (NEDO)

  6. Research award: Policy and Evaluation | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2018-01-14

    Jan 14, 2018 ... We offer a number of research awards providing a unique ... What frameworks and methodologies present opportunities for ... How are governments and organizations identifying and addressing critical research gaps in ...

  7. Research award: Policy and Evaluation | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    We offer a number of research awards providing a unique opportunity to ... What frameworks and methodologies present opportunities for strengthening the ... and organizations identifying and addressing critical research gaps in relation to the ...

  8. Research and Evaluation in the Public Schools.

    Science.gov (United States)

    Laney, Mary D.

    1982-01-01

    The article examines reasons for the lack of research being conducted by speech-language pathologists and audiologists in the public schools and points out advantages of that setting as a research site. (Author)

  9. Neural correlates of time versus money in product evaluation

    Directory of Open Access Journals (Sweden)

    Sebastian eLehmann

    2012-10-01

    Full Text Available The common saying time is money reflects the widespread belief in many people’s everyday life that time is valuable like money. Psychologically and neurophysiologically, however, these concepts seem to be quite different. This research replicates prior behavioral investigations by showing that merely mentioning time (compared to merely mentioning money leads participants to evaluate a product more positively. Beyond this finding, the present functional magnetic resonance imaging (fMRI experiment provides novel insight into the neurophysiological underpinnings of this behavioral effect by showing that more positive product evaluations in the time primes (compared to money primes are preceded by increased activation in the insula. Our data, therefore, support the idea of a time mindset that is different from a money mindset. Studies on the functional neuroanatomy of the insula have implicated this brain area in distinct but related psychological phenomena such as urging, addiction, loss aversion, and love. These functions imply greater personal connection between the consumer and a target subject or object and, thus, help explain why time-primed consumers rate products more positively.

  10. Methodology of evaluation of value created in the productive processes

    OpenAIRE

    M.T. Roszak

    2008-01-01

    Purpose: Of this paper was to present the methodology of analysis of the productive processes with applicationof value analysis and multi-criterion-analysis which allow to evaluate the technology and organization of theproductive processes.Design/methodology/approach: Presented in the paper methodology of evaluation of the productive processesis based on analysis of activities in the productive processes and their characteristics with reference to createdvalue in the productive chain.Findings...

  11. Sensory Evaluation of the Selected Coffee Products Using Fuzzy Approach

    OpenAIRE

    M.A. Lazim; M. Suriani

    2009-01-01

    Knowing consumers' preferences and perceptions of the sensory evaluation of drink products are very significant to manufacturers and retailers alike. With no appropriate sensory analysis, there is a high risk of market disappointment. This paper aims to rank the selected coffee products and also to determine the best of quality attribute through sensory evaluation using fuzzy decision making model. Three products of coffee drinks were used for sensory evaluation. Data wer...

  12. Gender disparities in research productivity among 9952 academic physicians.

    Science.gov (United States)

    Eloy, Jean Anderson; Svider, Peter F; Cherla, Deepa V; Diaz, Lucia; Kovalerchik, Olga; Mauro, Kevin M; Baredes, Soly; Chandrasekhar, Sujana S

    2013-08-01

    The number of women in medicine has increased considerably over the past 3 decades, and they now comprise approximately half of medical school matriculants. We examine whether gender disparities in research productivity are present throughout various specialties and compare these findings to those previously described among otolaryngologists. Bibliometric analysis. Research productivity, measured by the h-index, was calculated for 9,952 academic physicians representing 34 medical specialties. Additionally, trends in how rate of research productivity changed throughout different career stages were compared. Women were underrepresented at the level of professor and in positions of departmental leadership relative to their representation among assistant and associate professors. Male faculty had statistically higher research productivity both overall (H = 10.3 ± 0.14 vs. 5.6 ± 0.14) and at all academic ranks. For the overall sample, men and women appeared to have equivalent rates of research productivity. In internal medicine, men had higher early-career productivity, while female faculty had productivity equaling and even surpassing that of their male colleagues beyond 20 to 25 years. Men and women had equivalent productivity in surgical specialties throughout their careers, and similar rates in pediatrics until 25 to 30 years. Female academic physicians have decreased research productivity relative to men, which may be one factor contributing to their underrepresentation at the level of professor and departmental leader relative to their proportions in junior academic ranks. Potential explanations may include fewer woman physicians in the age groups during which higher academic ranks are attained, greater family responsibilities, and greater involvement in clinical service and educational contributions. © 2013 The American Laryngological, Rhinological and Otological Society, Inc.

  13. Tasting the Smell: scent Experts' and Laymen's Evaluation of Product (In)congruity

    OpenAIRE

    Adams, Carmen; Doucé, Lieve; Janssens, Wim; Vanrie, Jan; Petermans, Ann

    2013-01-01

    This research studies the effect of scent expertise on product and taste evaluations in the presence of an ambient scent (in)congruent with the products. In order to gain insight into this effect, we also examine the relationship of scent expertise with odour identification and odour awareness. An experiment with 93 participants revealed that (novice) scent experts evaluated the product incongruent with the ambient scent more negatively than laymen, supporting our assumption that (novice) sce...

  14. Evaluation of the physicians‘ of n hospital opinion on clinical trials of medicinal products

    OpenAIRE

    Videikaitė, Lina

    2014-01-01

    Aim of the research. To evaluate the physicians‘ of N Hospital opinion on clinical trials of medicinal products. Objectives. To evaluate the factors affecting physicians' motivation to perform clinical trials of medicinal products as well as those that prevent the physicians getting involved in the trials. To assess physicians' attitude towards clinical trials of medicinal products. To compare the opinions of physicians who have and have’nt participated in clinical trials. Methods of...

  15. Risk identification and evaluation of customer collaboration in product development

    Directory of Open Access Journals (Sweden)

    Xuefeng Zhang

    2015-05-01

    Full Text Available Purpose: The purpose of this paper is to identify risk factors that caused by customer collaboration in new product development systematically, and propose an approach to judge which risk factors are critical and catch substantial attention. Design/methodology/approach: This study identifies risk factors according to the results of case studies of enterprises in china. On this basis, an improved rough number approach is put forward to evaluate the importance of risk factors. Findings: Firstly, classify risk factors into three aspects. Then, present a risk factor set, which include thirty-seven risk factors. At last, determine which risk factors are critical by using an improved rough number approach. Originality/value: Considering there are few researches studying comprehensive risk factors of customer collaboration and assessing them, this paper explores a risk factor set of customer collaboration in product development stage, and proposes a novel approach, which can help to solve the problem of subjective, vague and lack of prior information of evaluation, to evaluate risk factors.

  16. Predictors of Teacher Educators' Research Productivity

    Science.gov (United States)

    Nasser-Abu Alhija, Fadia M.; Majdob, Arin

    2017-01-01

    This study examined the relationship between teacher educators' research productivity (RP) and their background and professional characteristics, attitudes, motives, obstacles and time devoted to research. The sample included 161 teacher educators from four teacher education colleges in Israel. The findings indicate the significance of five…

  17. Research Productivity and Its Policy Implications in Higher Education Institutions

    Science.gov (United States)

    Quimbo, Maria Ana T.; Sulabo, Evangeline C.

    2014-01-01

    Responding to the Commission on Higher Education's development plan of enhancing research culture among higher education institutions, this study was conducted to analyze the research productivity of selected higher education institutions. It covered five state universities in the Philippines where a total of 377 randomly selected faculty members…

  18. Researches on nuclear criticality safety evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Okuno, Hiroshi; Suyama, Kenya; Nomura, Yasushi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    2003-10-01

    For criticality safety evaluation of burnup fuel, the general-purpose burnup calculation code, SWAT, was revised, and its precision was confirmed through comparison with other results from OECD/NEA's burnup credit benchmarks. Effect by replacing the evaluated nuclear data from JENDL-3.2 to ENDF/B-VI and JEF-2.2 was also studied. Correction factors were derived for conservative evaluation of nuclide concentrations obtained with the simplified burnup code ORIGEN2.1. The critical masses of curium were calculated and evaluated for nuclear criticality safety management of minor actinides. (author)

  19. Researches on nuclear criticality safety evaluation

    International Nuclear Information System (INIS)

    Okuno, Hiroshi; Suyama, Kenya; Nomura, Yasushi

    2003-01-01

    For criticality safety evaluation of burnup fuel, the general-purpose burnup calculation code, SWAT, was revised, and its precision was confirmed through comparison with other results from OECD/NEA's burnup credit benchmarks. Effect by replacing the evaluated nuclear data from JENDL-3.2 to ENDF/B-VI and JEF-2.2 was also studied. Correction factors were derived for conservative evaluation of nuclide concentrations obtained with the simplified burnup code ORIGEN2.1. The critical masses of curium were calculated and evaluated for nuclear criticality safety management of minor actinides. (author)

  20. Center for Biologics Evaluation and Research (CBER)

    Data.gov (United States)

    Federal Laboratory Consortium — CBER is the Center within FDA that regulates biological products for human use under applicable federal laws, including the Public Health Service Act and the Federal...

  1. Evaluating automatically annotated treebanks for linguistic research

    NARCIS (Netherlands)

    Bloem, J.; Bański, P.; Kupietz, M.; Lüngen, H.; Witt, A.; Barbaresi, A.; Biber, H.; Breiteneder, E.; Clematide, S.

    2016-01-01

    This study discusses evaluation methods for linguists to use when employing an automatically annotated treebank as a source of linguistic evidence. While treebanks are usually evaluated with a general measure over all the data, linguistic studies often focus on a particular construction or a group

  2. Evaluating Access. Research Brief. Edition 9

    Science.gov (United States)

    Sutton Trust, 2015

    2015-01-01

    This report reviews national and international research on widening participation and access programmes to find out which methods are most likely to help disadvantaged pupils get into higher education. Analysis of existing research in the United States and United Kingdom suggests that summer schools, tutoring, and mentoring are among five methods…

  3. Evaluation in Design-Oriented Research

    NARCIS (Netherlands)

    Verschuren, P.J.M.; Hartog, R.J.M.

    2005-01-01

    Design has been recognized for a long time both as art and as science. In the sixties of the previous century design-oriented research began to draw the attention of scientific researchers and methodologists, not only in technical engineering but also in the social sciences. However, a rather

  4. Intention to Purchase Products under Volume Discount Scheme: A Conceptual Model and Research Propositions

    Directory of Open Access Journals (Sweden)

    Mohammad Iranmanesh

    2014-12-01

    Full Text Available Many standard brands sell products under the volume discount scheme (VDS as more and more consumers are fond of purchasing products under this scheme. Despite volume discount being commonly practiced, there is a dearth of research, both conceptual and empirical, focusing on purchase characteristics factors and consumer internal evaluation concerning the purchase of products under VDS. To attempt to fill this void, this article develops a conceptual model on VDS with the intention of delineating the influence of the purchase characteristics factors on the consumer intention to purchase products under VDS and provides an explanation of their effects through consumer internal evaluation. Finally, the authors discuss the managerial implications of their research and offer guidelines for future empirical research.

  5. Factors affecting research productivity of production and operations management groups: An empirical study

    Directory of Open Access Journals (Sweden)

    2006-01-01

    Full Text Available This paper identifies factors that promote research productivity of production and operations management (POM groups of researchers in US business schools. In this study, research productivity of a POM group is defined as the number of articles published per POM professor in a specific period of time. The paper also examines factors that affect research quality, as measured by the number of articles published per POM professor in journals, which have been recognized in the POM literature as an elite set. The results show that three factors increase both the research productivity and the quality of the articles published by professors of a POM group. These factors are (a the presence of a POM research center, (b funding received from external sources for research purposes, and (c better library facilities. Doctoral students do assist in improving research quality and productivity, but they are not the driving force. These results have important implications for establishing policy guidelines for business schools. For example, real-world problems are funded by external sources and have a higher probability of publication. Furthermore, schools could place more emphasis on external funding, as most engineering schools do, since groups receiving external funding are more productive in terms of research.

  6. University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

    Energy Technology Data Exchange (ETDEWEB)

    Pendse, Hemant P.

    2010-11-23

    This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

  7. Consumer evaluations of products from developing countries

    NARCIS (Netherlands)

    Verlegh, P.W.J.

    2002-01-01

    Consumers use country of origin as a signal or proxy for product quality. Consumers have little confidence in the ability of less developed countries to produce high quality goods. On the other hand emotionally attachment to a country or associations of "exoticness" or "authenticity" can lead to a

  8. Biological evaluation of nanosilver incorporated cellulose pulp for hygiene products

    Energy Technology Data Exchange (ETDEWEB)

    Kavitha Sankar, P.C.; Ramakrishnan, Reshmi; Rosemary, M.J., E-mail: rosemarymj@lifecarehll.com

    2016-04-01

    Cellulose pulp has a visible market share in personal hygiene products such as sanitary napkins and baby diapers. However it offers good surface for growth of microorganisms. Huge amount of research is going on in developing hygiene products that do not initiate microbial growth. The objective of the present work is to produce antibacterial cellulose pulp by depositing silver nanopowder on the cellulose fiber. The silver nanoparticles used were of less than 100 nm in size and were characterised using transmission electron microscopy and X-ray powder diffraction studies. Antibacterial activity of the functionalized cellulose pulp was proved by JIS L 1902 method. The in-vitro cytotoxicity, in-vivo vaginal irritation and intracutaneous reactivity studies were done with silver nanopowder incorporated cellulose pulp for introducing a new value added product to the market. Cytotoxicity evaluation suggested that the silver nanoparticle incorporated cellulose pulp is non-cytotoxic. No irritation and skin sensitization were identified in animals tested with specific extracts prepared from the test material in the in-vivo experiments. The results indicated that the silver nanopowder incorporated cellulose pulp meets the requirements of the standard practices recommended for evaluating the biological reactivity and has good biocompatibility, hence can be classified as a safe hygiene product. - Highlights: • Different amounts of silver nanoparticles (0.2 g–0.4 g/napkin) were added to cellulose pulp. • The silver nanoparticle incorporated cellulose pulp was proved to be antibacterial by JIS L 1902 method. • The minimum concentration of silver required for antibacterial activity with no cytotoxicity has been found out. • In-vivo vaginal irritation and intracutaneous reactivity studies confirmed the biocompatibility of the material.

  9. Biological evaluation of nanosilver incorporated cellulose pulp for hygiene products

    International Nuclear Information System (INIS)

    Kavitha Sankar, P.C.; Ramakrishnan, Reshmi; Rosemary, M.J.

    2016-01-01

    Cellulose pulp has a visible market share in personal hygiene products such as sanitary napkins and baby diapers. However it offers good surface for growth of microorganisms. Huge amount of research is going on in developing hygiene products that do not initiate microbial growth. The objective of the present work is to produce antibacterial cellulose pulp by depositing silver nanopowder on the cellulose fiber. The silver nanoparticles used were of less than 100 nm in size and were characterised using transmission electron microscopy and X-ray powder diffraction studies. Antibacterial activity of the functionalized cellulose pulp was proved by JIS L 1902 method. The in-vitro cytotoxicity, in-vivo vaginal irritation and intracutaneous reactivity studies were done with silver nanopowder incorporated cellulose pulp for introducing a new value added product to the market. Cytotoxicity evaluation suggested that the silver nanoparticle incorporated cellulose pulp is non-cytotoxic. No irritation and skin sensitization were identified in animals tested with specific extracts prepared from the test material in the in-vivo experiments. The results indicated that the silver nanopowder incorporated cellulose pulp meets the requirements of the standard practices recommended for evaluating the biological reactivity and has good biocompatibility, hence can be classified as a safe hygiene product. - Highlights: • Different amounts of silver nanoparticles (0.2 g–0.4 g/napkin) were added to cellulose pulp. • The silver nanoparticle incorporated cellulose pulp was proved to be antibacterial by JIS L 1902 method. • The minimum concentration of silver required for antibacterial activity with no cytotoxicity has been found out. • In-vivo vaginal irritation and intracutaneous reactivity studies confirmed the biocompatibility of the material.

  10. Product Development and Commercialization of Diagnostic or Life Science Products for Scientists and Researchers.

    Science.gov (United States)

    Alonso, Meghan M

    2017-01-01

    Commercializing a diagnostic or life science product often encompasses different goals than that of research and grant funding. There are several necessary steps, and a strategy needs to be well defined in order to be successful. Product development requires input from and between various groups within a company and, for academia, outside entities. The product development stakeholder groups/entities are research, marketing, development, regulatory, manufacturing, clinical, safety/efficacy, and quality. After initial research and development, much of the work in product development can be outsourced or jointly created using public-private partnerships. This chapter serves as an overview of the product development process and provides a guide to best define a product strategy.

  11. Designing, Teaching, and Evaluating Two Complementary Mixed Methods Research Courses

    Science.gov (United States)

    Christ, Thomas W.

    2009-01-01

    Teaching mixed methods research is difficult. This longitudinal explanatory study examined how two classes were designed, taught, and evaluated. Curriculum, Research, and Teaching (EDCS-606) and Mixed Methods Research (EDCS-780) used a research proposal generation process to highlight the importance of the purpose, research question and…

  12. Rethinking evaluation | IDRC - International Development Research ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2010-10-06

    Oct 6, 2010 ... But in a rapidly changing world, how should evaluation methods ... panel discussion at Carleton University hosted by the International ... Public Service Commission, also reflected on the changes triggered by globalization.

  13. Evaluation | IDRC - International Development Research Centre

    International Development Research Centre (IDRC) Digital Library (Canada)

    This evidence can improve an ongoing project, strengthen the planning of new ... The decision to evaluate is strategic, and based on issues such as risk, ... to ensure donor organizations meet their accountability and learning needs too.

  14. Nursing Doctorates in Brazil: research formation and theses production.

    Science.gov (United States)

    Scochi, Carmen Gracinda Silvan; Gelbcke, Francine Lima; Ferreira, Márcia de Assunção; Lima, Maria Alice Dias da Silva; Padilha, Katia Grillo; Padovani, Nátali Artal; Munari, Denize Bouttelet

    2015-01-01

    to analyze the formation of nursing doctorates in Brazil, from theses production, disciplines and other strategies focusing on research offered by courses. a descriptive and analytical study of the performance of 18 doctoral courses in nursing, running from 1982 to 2010, and defended their theses between 2010-2012. 502 theses were defended in this period, most linked to the online research process of health and nursing care. There are gaps in the knowledge of theoretical and philosophical foundations of care, nursing history and ethics. There are also weaknesses in the methodological design of the theses, with a predominance of descriptive and/or exploratory studies. This was consistent with international standards set with regards to the proposition of research of disciplines and complementary strategies in forming the doctorate. despite the efforts and advances in research formation, it is essential to expand to more robust research designs with a greater impact on production knowledge that is incorporated into practice.

  15. FEDS : A Framework for Evaluation in Design Science Research

    DEFF Research Database (Denmark)

    Venable, John; Pries-Heje, Jan; Baskerville, Richard

    2015-01-01

    Evaluation of design artefacts and design theories is a key activity in Design Science Research (DSR), as it provides feedback for further development and (if done correctly) assures the rigour of the research. However, the extant DSR literature provides insufficient guidance on evaluation...... to enable Design Science Researchers to effectively design and incorporate evaluation activities into a DSR project that can achieve DSR goals and objectives. To address this research gap, this research paper develops, explicates, and provides evidence for the utility of a Framework for Evaluation in Design...... Science (FEDS) together with a process to guide design science researchers in developing a strategy for evaluating the artefacts they develop within a DSR project. A FEDS strategy considers why, when, how, and what to evaluate. FEDS includes a two-dimensional characterisation of DSR evaluation episodes...

  16. Behavioral Response Research Evaluation Workshop (BRREW)

    Science.gov (United States)

    2015-09-30

    Len Thomas & Catriona Harris Centre for Research into Ecological and Environmental Modelling (CREEM) University of St Andrews St Andrews , UK...Specifically Dr. Hans Slabbekoorn (University of Leiden), Professor Vincent Janik (University of St Andrews ) and Professor Douglas Wartzok (Florida

  17. Characteristics of a productive research environment: literature review.

    Science.gov (United States)

    Bland, C J; Ruffin, M T

    1992-06-01

    What environmental factors stimulate and maintain research productivity? To answer this question, the authors conducted an extensive review of articles and books on research productivity published from the mid-1960s through 1990. This review revealed that a consistent set of 12 characteristics was found in research-conducive environments: (1) clear goals that serve a coordinating function, (2) research emphasis, (3) distinctive culture, (4) positive group climate, (5) assertive participative governance, (6) decentralized organization, (7) frequent communication, (8) accessible resources, particularly human, (9) sufficient size, age, and diversity of the research group, (10) appropriate rewards, (11) concentration on recruitment and selection, and (12) leadership with research expertise and skill in both initiating appropriate organizational structure and using participatory management practices. Some of these characteristics are not surprising, although some findings were unexpected, such as that participative governance correlated consistently with research productivity. The differential impact of each of these 12 characteristics is unclear. It is clear, however, that the leader has a disproportionate impact through his or her influence on all of the other characteristics. Yet, an overarching feature of these characteristics is their interdependency. These factors do not operate in research groups as isolated characteristics. Rather, they are like fine threads of a whole fabric: individual, yet when interwoven, providing a strong, supportive, and stimulating backdrop for the researcher. The authors conclude that while at a distance the productive research enterprise looks like a highly robust entity, upon closer inspection it is revealed to be a delicate structure highly dependent on the existence and effective working of numerous individual, organizational, and leadership characteristics.

  18. Health Research Governance: Introduction of a New Web-based Research Evaluation Model in Iran: One-decade Experience

    Science.gov (United States)

    MALEKZADEH, Reza; AKHONDZADEH, Shahin; EBADIFAR, Asghar; BARADARAN EFTEKHARI, Monir; OWLIA, Parviz; GHANEI, Mostafa; FALAHAT, Katayoun; HABIBI, Elham; SOBHANI, Zahra; DJALALINIA, Shirin; PAYKARI, Niloofar; MOJARRAB, Shahnaz; ELTEMASI, Masoumeh; LAALI, Reza

    2016-01-01

    Background: Governance is one of the main functions of Health Research System (HRS) that consist of four essential elements such as setting up evaluation system. The goal of this study was to introduce a new web based research evaluation model in Iran. Methods: Based on main elements of governance, research indicators have been clarified and with cooperation of technical team, appropriate software was designed. Three main steps in this study consist of developing of mission-oriented program, creating enabling environment and set up Iran Research Medical Portal as a center for research evaluation. Results: Fifty-two universities of medical sciences in three types have been participated. After training the evaluation focal points in all of medical universities, access to data entry and uploading all of documents were provided. Regarding to mission – based program, the contribution of medical universities in knowledge production was 60% for type one, 31% for type two and 9% for type three. The research priorities based on Essential National Health Research (ENHR) approach and mosaic model were gathered from universities of medical sciences and aggregated to nine main areas as national health research priorities. Ethical committees were established in all of medical universities. Conclusion: Web based research evaluation model is a comprehensive and integrated system for data collection in research. This system is appropriate tool to national health research ranking. PMID:27957437

  19. An evaluation framework for business process management products

    NARCIS (Netherlands)

    Koster, Stefan R.; Iacob, Maria Eugenia; Ferreira Pires, Luis; Rinderle-Ma, Stefanie; Sadiq, Shazia; Leymann, Frank

    2010-01-01

    The number of BPM products available has increased substantially in the last years, so that choosing among these products became a difficult task for potential BPM users. This paper defines a framework for evaluating BPM products, and discusses how this framework has been applied in the development

  20. Packaging Evaluation Approach to Improve Cosmetic Product Safety

    OpenAIRE

    Benedetta Briasco; Priscilla Capra; Arianna Cecilia Cozzi; Barbara Mannucci; Paola Perugini

    2016-01-01

    In the Regulation 1223/2009, evaluation of packaging has become mandatory to assure cosmetic product safety. In fact, the safety assessment of a cosmetic product can be successfully carried out only if the hazard deriving from the use of the designed packaging for the specific product is correctly evaluated. Despite the law requirement, there is too little information about the chemical-physical characteristics of finished packaging and the possible interactions between formulation and packag...

  1. Research productivity in select psychology journals, 1986-2008.

    Science.gov (United States)

    Mahoney, Kevin T; Buboltz, Walter C; Calvert, Barbara; Hoffmann, Rebecca

    2010-01-01

    Examination of research productivity has a long history in psychology. Journals across psychology have periodically published research-productivity studies. An analysis of institutional research productivity was conducted for 17 journals published by the American Psychological Association for the years 1986-2008. This analysis implemented two methodologies: one a replication and extension of G. S. Howard, D. A. Cole, and S. E. Maxwell's (1987) method, the other a new method designed to give credit to psychology departments rather than only overall institutions. A system of proportional credit assured all articles with multiple institutions received credit. Results show that for the 23-year period, the University of Illinois at Urbana-Champaign was ranked 1st, followed by the University of California, Los Angeles, and the University of Michigan, Ann Arbor. Overall, results showed both consistency and change across all journals examined. The authors explore the implications of these findings in the context of the current academic environment.

  2. Product evaluation based in the association between intuition and tasks.

    Science.gov (United States)

    Almeida e Silva, Caio Márcio; Okimoto, Maria Lúcia L R; Albertazzi, Deise; Calixto, Cyntia; Costa, Humberto

    2012-01-01

    This paper explores the importance of researching the intuitiveness in the product use. It approaches the intuitiveness influence for users that already had a visual experience of the product. Finally, it is suggested the use of a table that relates the tasks performed while using a product, the features for an intuitive use and the performance metric "task success".

  3. Spatial support of knowledge production in higher education: Research paper

    OpenAIRE

    van Sprang, H; Groen, BH; van der Voordt, Theo

    2013-01-01

    This paper explores the impact of the physical and social dimensions of the work environment on satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using interviews and logbook analysis, and web-based survey (N = 188). Optimally facilitating knowledge production requires both space for concentration (to support internalisation of knowledge) and spa...

  4. The evaluation of research by scientometric indicators

    CERN Document Server

    Vinkler, Peter

    2010-01-01

    Aimed at academics, academic managers and administrators, professionals in scientometrics, information scientists and science policy makers at all levels. This book reviews the principles, methods and indicators of scientometric evaluation of information processes in science and assessment of the publication activity of individuals, teams, institutes and countries. It provides scientists, science officers, librarians and students with basic and advanced knowledge on evaluative scientometrics. Especially great stress is laid on the methods applicable in practice and on the clarification of quantitative aspects of impact of scientific publications measured by citation indicators.

  5. Research Results Transfer towards the Productive Sector via Research Collaboration in Four Colombian Public Universities

    Directory of Open Access Journals (Sweden)

    Maria Eugenia Morales Rubiano

    2015-12-01

    Full Text Available This article shows the determining factors in the research results transfer towards the productive sector via research collaboration in four Colombian public universities. Thirty heads of units in the aforementioned universities were interviewed, which served to determine eleven cases of study and conduct interviews with thirty-five participants ranging from researchers, participant in formation and business people, in each case, it was found that especially in the last decade universities have turned to creating capacities for research collaboration as well as an openness in participants to create links that not only go in favor of enriching the productive sector but also in strengthening formation and research processes. It was concluded that there is a recent growing interest in the different actors in strengthening the bonds between the universities and the productive sector, though there may be some difficulties in the process of research collaboration due to the lack of an appropriate regulatory framework.

  6. Research and Application of Knowledge Resources Network for Product Innovation

    Directory of Open Access Journals (Sweden)

    Chuan Li

    2015-01-01

    Full Text Available In order to enhance the capabilities of knowledge service in product innovation design service platform, a method of acquiring knowledge resources supporting for product innovation from the Internet and providing knowledge active push is proposed. Through knowledge modeling for product innovation based on ontology, the integrated architecture of knowledge resources network is put forward. The technology for the acquisition of network knowledge resources based on focused crawler and web services is studied. Knowledge active push is provided for users by user behavior analysis and knowledge evaluation in order to improve users’ enthusiasm for participation in platform. Finally, an application example is illustrated to prove the effectiveness of the method.

  7. Research and application of knowledge resources network for product innovation.

    Science.gov (United States)

    Li, Chuan; Li, Wen-qiang; Li, Yan; Na, Hui-zhen; Shi, Qian

    2015-01-01

    In order to enhance the capabilities of knowledge service in product innovation design service platform, a method of acquiring knowledge resources supporting for product innovation from the Internet and providing knowledge active push is proposed. Through knowledge modeling for product innovation based on ontology, the integrated architecture of knowledge resources network is put forward. The technology for the acquisition of network knowledge resources based on focused crawler and web services is studied. Knowledge active push is provided for users by user behavior analysis and knowledge evaluation in order to improve users' enthusiasm for participation in platform. Finally, an application example is illustrated to prove the effectiveness of the method.

  8. Postgraduate education and research in Brazil: regulation and reconfiguration processes of academic work formation and production

    Directory of Open Access Journals (Sweden)

    João Ferreira de Oliveira

    2015-07-01

    Full Text Available This text analyses some of the processes of formation and production regulation and reconfiguration of the scholarly work in Brazil. Initially we examine the context and meaning of knowledge production in times of flexible accumulation, as well as the current landscape of Postgraduate education in the country. We seek to understand how public policies in the area, particularly the actions of evaluation and promotion, and the new modus operandi of the Postgraduate study and research organization have been reconfiguring the work production of teaching and students within the programs, especially in education. Above all, we seek to highlight the role of promotion and evaluation agencies, increasingly committed to a vision of expansion that drives the production of knowledge associated with demands of economic-productivity, rather than a consistent formative project that would result in a significant advancement in the production and dissemination of knowledge in the different areas.

  9. Improving product development practice: An action-research based approach

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    In studies of new product development it has often been concluded that to a large extent new product suc-cess is tunder the influence of companies and long lists of direct norma-tive guide-lines have been formulated. Nevertheless descriptive studi that deve-lopment practice is still far from...... the widely published normative advice. While there may be several reasons for discrepancies between research results and prac-tice this paper focuses on problems of implementation of the identified success factors. Within the research area of NPD-management there has been numerous surveys as well as case...

  10. Public relations metrics: research and evaluation

    NARCIS (Netherlands)

    van Ruler, B.; Tkalac Verčič, A.; Verčič, D.

    2008-01-01

    Responding to the increasing need in academia and the public relations profession, this volume presents the current state of knowledge in public relations measurement and evaluation. The book brings together ideas and methods that can be used throughout the world, and scholars and practitioners from

  11. Action Research in User-Centered Product Development

    DEFF Research Database (Denmark)

    Brandt, Eva

    2004-01-01

    Technological development and increased international competition have imposed a significant burden on the product development function of many companies. The growing complexity of products demands a larger product development team with people having various competencies. Simultaneously...... the importance of good quality, usability and customisation of products is growing, and many companies want to involve customers and users directly in the development work. Both the complexity and quality demand new ways of working that support collaboration between people with various competencies, interests...... and responsibilities both inside and outside the company. This paper reports experiences from using action research to introduce new user-centred work practices in two commercial product development projects. The interventions varied. In the first project it was found rewarding to engage customers and users...

  12. International Conference on Production Research (ICPR) Americas Region

    CERN Document Server

    Velasco, Nubia

    2012-01-01

    The book presents several highly selected cases in emerging countries where the production-logistics systems have been optimized or improved with the support of mathematical models. The book contains a selection of papers from the 5th International Conference on Production Research (ICPR) Americas 2010 held on July 21-23 in Bogotá, Colombia. The main topic of the conference was “Technologies in Logistics and Manufacturing for Small and Medium Enterprises” which is perfectly aligned with the realities of emerging countries. The book presents methodologies and case studies related to a wide variety of production/logistics systems such as diary production, auto parts, steel and iron production, and financial services. It is focused but not limited to Small/Medium Enterprises.

  13. Livestock Production - Future Directions and Priority Research Areas

    Energy Technology Data Exchange (ETDEWEB)

    Robinson, P.H., E-mail: phrobinson@ucdavis.edu [Department of Animal Science, University of California, Davis, CA (United States)

    2014-07-15

    While specific issues facing ruminant production differ in detail between developed and developing countries, the general constraints and challenges suggest that common research interests will continue to exist. The need to increase outputs of ruminant meat and milk products differ sharply between the developed and developing world, although a need to increase animal productivity is evident in both, albeit primarily to increase product output in the developing world but to decrease environmental impacts of food producing ruminants in the developed world. The largest single limitation to increasing productivity of ruminants in the low digestibility of the structural carbohydrates which comprise a large proportion of their diets. Research on actions of secondary compounds in ruminal metabolism is required to avoid their negative effects and harvest the benefits of their positive effects. Domesticated ruminants have historically provided a substantial portion of the world's supplies. However if that is to continue, ways must be found to increase digestibility of their primary feedstocks, increase the 'healthfulness' of their products to humans, and decrease the environmental impact of their production systems.

  14. Livestock Production - Future Directions and Priority Research Areas

    International Nuclear Information System (INIS)

    Robinson, P.H.

    2014-01-01

    While specific issues facing ruminant production differ in detail between developed and developing countries, the general constraints and challenges suggest that common research interests will continue to exist. The need to increase outputs of ruminant meat and milk products differ sharply between the developed and developing world, although a need to increase animal productivity is evident in both, albeit primarily to increase product output in the developing world but to decrease environmental impacts of food producing ruminants in the developed world. The largest single limitation to increasing productivity of ruminants in the low digestibility of the structural carbohydrates which comprise a large proportion of their diets. Research on actions of secondary compounds in ruminal metabolism is required to avoid their negative effects and harvest the benefits of their positive effects. Domesticated ruminants have historically provided a substantial portion of the world's supplies. However if that is to continue, ways must be found to increase digestibility of their primary feedstocks, increase the 'healthfulness' of their products to humans, and decrease the environmental impact of their production systems

  15. Evaluating Performance: Strategic Alignment and Productivity

    OpenAIRE

    Armando Cuesta Santos

    2012-01-01

    Actually is reported as a world problem to enterprise label the rupture or inexistence of the connections between the strategy, human resource management and the organizational management indicators. In the Cuban enterprise practice this is manifest too. Surpass this rupture on the technical and organizer plan, is the principal objective of this research. In this paper is argument one methodological process that begins with the definition of labour competency to consider into post profiles, t...

  16. Trends in nursing ethics research: Mapping the literature production.

    Science.gov (United States)

    Blažun Vošner, Helena; Železnik, Danica; Kokol, Peter; Vošner, Janez; Završnik, Jernej

    2017-12-01

    There have been a number of debates in the field of nursing ethics. Researchers have focused on various aspects of nursing ethics, such as professional ethics, professional, nursing and ethical values. Within this research, a variety of literature reviews have been conducted, but to the best of our knowledge, bibliometric mapping has not yet been used. This article aims to analyse the production of literature within nursing ethics research. In order to examine publishing patterns, we focused on publishing dynamics, prolific research entities and the most-cited articles. We additionally visualised the content of the literature using a novel mixed-method approach, combining bibliometric analysis and mapping with thematic analysis. Ethical considerations: In our study, ethical review was not required. A total of 1416 information sources were found in the Scopus database. Overall, literature production has increased; however, in recent years, the quantity of published material has begun to decrease. The most prolific countries are the United States, the United Kingdom and Canada, and the most prolific source titles are Nursing Ethics, Journal of Advanced Nursing and Nursing Times. Lately, research in the field of nursing ethics has been focused more on life care (providing for the basic needs of older residents), moral distress and community nursing. The dynamics of research literature production showed an exponential rise in the number of published information sources - a rise which started in the period between 1974 and 1998. Since that period, the trend has stabilised, which might indicate that nursing ethics research is starting a transition to a mature phase. The innovative use of bibliometric analysis and mapping, together with thematic analysis, is a useful tool for analysis of research production in the field of nursing ethics. The results presented can be an excellent starting point for literature reviews and more exhaustive data, information and knowledge

  17. Establishing a 'track record': research productivity and nursing academe.

    Science.gov (United States)

    Emden, C

    1998-01-01

    Many nursing academics in Australia are finding to their dismay that an outstanding teaching career and exemplary professional contribution to their field--and a PhD--are not enough to achieve promotion within their university, or secure a new academic post. One must also possess a proven or established 'track record' in research and publication. The operational funding arrangements for Australian universities rely in part on the research productivity of their academic staff members. This places special expectation upon the way academics conduct their scholarly work. Nursing academics are under particular pressure: as relative newcomers to the university scene, most find themselves considered as early career researchers with weak track records. This paper reviews relevant research and draws upon personal experience in the area of research development, to highlight how nursing academics may most strategically establish a research and publication record with a view to career advancement.

  18. 78 FR 13097 - Electric Power Research Institute; Seismic Evaluation Guidance

    Science.gov (United States)

    2013-02-26

    ... NUCLEAR REGULATORY COMMISSION [NRC-2013-0038] Electric Power Research Institute; Seismic... Electric Power Research Institute (EPRI)-1025287, ``Seismic Evaluation Guidance: Screening, Prioritization... guidance and clarification of an acceptable approach to assist nuclear power reactor licensees when...

  19. FHWA research and technology evaluation program summary report spring 2016

    Science.gov (United States)

    2016-08-01

    This report summarizes the 16 evaluations being conducted by the Volpe National Transportation Systems Center on behalf of FHWAs Research and Technology Program. The FHWA R&T Program furthers the Turner-Fairbank Highway Research Centers goal of...

  20. Evaluation of electrical energy production patterns

    International Nuclear Information System (INIS)

    Conti, F.; Graziani, G.; Zanantoni, C.

    1975-06-01

    The main features and typical applications of the code TOTEM, developed by the CCR under request of DG XVII are described. The code is used to evaluate the physical and economical consequences of electrical power station installation policies. The input data are: the time-dependent electrical energy demand and its load duration curve, the physical and economical characteristics of the power stations, and the splitting of the energy between the various types of stations, apart from the energy produced by a plutonium burner and plutonium producer, which is calculated by the code. The output includes; costs, fuel consumption, separative work requirements

  1. Evaluating Performance: Strategic Alignment and Productivity

    Directory of Open Access Journals (Sweden)

    Armando Cuesta Santos

    2012-10-01

    Full Text Available Actually is reported as a world problem to enterprise label the rupture or inexistence of the connections between the strategy, human resource management and the organizational management indicators. In the Cuban enterprise practice this is manifest too. Surpass this rupture on the technical and organizer plan, is the principal objective of this research. In this paper is argument one methodological process that begins with the definition of labour competency to consider into post profiles, that conduced to surpass the actual rupture or opposition (versus, or not alignment or not integration, between the performance individual appraisal and the performance organizational strategic appraisal.

  2. Performance evaluation on aquatic product cold-chain logistics

    Directory of Open Access Journals (Sweden)

    Wenbing Wu

    2015-11-01

    Full Text Available Purpose: The requirements for high quality and diversification aquatic products are increasing with the improvement of Chinese living standard. However, the distribution between place of production and place of consumption are uneven, which results in large cold-chain logistics demand for aquatic products. At present, the low-level development of cold chain logistics has a bad impact on the circulation of aquatic products in China. So it is very urgent to develop cold-chain logistics in China. Design/methodology/approach: In order to do this, we apply performance evaluation, a well-known management tool, to study Chinese aquatic product cold-chain logistics. In this paper we first propose SISP(Subjects, Indexes, Standards, and Phases of performance evaluation model and ACSSN model(Aquatic product, Customer, Supply Chain, Society, and Node enterprises of supply chain for aquatic products cold-chain logistics performance evaluation. Then an ANP-Fuzzy method is proposed to evaluate the operational performance of Shandong Oriental Ocean Sci-Tech Co., Ltd. Furthermore, a system dynamic model is built to simulate the impact of temperature on the profits in aquatic products cold-chain sales section. Findings: We find out within a reasonable temperature range, lower temperature brings higher profit level. Also, performance improvement methods are proposed and the simulation of performance evaluation system is developed. Practical implications: Our findings can help to improve the level of aquatic product cold-chain logistics in China. Originality/value: The paper proposes the SISP (Subjects, Indexes, Standards, and Phases of performance evaluation model and ACSSN model (Aquatic product, Customer, Supply Chain, Society, and Node enterprises of supply chain for aquatic products cold-chain logistics performance evaluation.

  3. A Comprehensive Framework for Evaluation in Design Science Research

    DEFF Research Database (Denmark)

    Pries-Heje, Jan; Baskerville, Richard; Venable, John

    2012-01-01

    Evaluation is a central and essential activity in conducting rigorous Design Science Research (DSR), yet there is surprisingly little guidance about designing the DSR evaluation activity beyond suggesting possible methods that could be used for evaluation. This paper extends the notable exception...... of the existing framework of Pries-Heje et al [11] to address this problem. The paper proposes an extended DSR evaluation framework together with a DSR evaluation design method that can guide DSR researchers in choosing an appropriate strategy for evaluation of the design artifacts and design theories that form...... the output from DSR. The extended DSR evaluation framework asks the DSR researcher to consider (as input to the choice of the DSR evaluation strategy) contextual factors of goals, conditions, and constraints on the DSR evaluation, e.g. the type and level of desired rigor, the type of artifact, the need...

  4. Spatial support of knowledge production in higher education : Research paper

    NARCIS (Netherlands)

    van Sprang, H; Groen, BH; van der Voordt, Theo

    2013-01-01

    This paper explores the impact of the physical and social dimensions of the work environment on satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using

  5. Current research in Spain on walnut for wood production

    Science.gov (United States)

    Neus Alet& #224; Neus NO-VALUE

    2004-01-01

    The Department of Mediterranean Trees at the Institut de Recerca i Tecnologia Agroalimentaries (IRTA) in Spain initiated a research program in 1993 to examine the variability among walnut species for wood production and to establish orchards with improved selections. The main objective of the programme is to obtain superior Persian walnut (Juglans regia...

  6. Influence of gender, academic disciplines on research productivity of ...

    African Journals Online (AJOL)

    This study investigated research productivity of lecturers in two universities in South-west Nigeria. The study employed the descriptive survey method and administered 193 copies of the questionnaire to lecturers in the two universities. Out of these, 161 were retrieved but only 154 were properly filled and used for the ...

  7. Research Productivity of ]unior Academic Staff at a Tertiary Medical ...

    African Journals Online (AJOL)

    Research Productivity of ]unior Academic Staff at a Tertiary Medical College in South West, Nigeria. OA Lesi, OO Orenuga, A Roberts, OO Abudu. Abstract. No Abstract. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL TEXT · AJOL African Journals Online. HOW TO USE AJOL.

  8. Short history of natural product research in the CSIR

    CSIR Research Space (South Africa)

    Walwyn, D

    2006-02-01

    Full Text Available Natural product research has been a major component of the CSIR's bioscience activities for its entire history, and particularly in the 1960s and 1970s. This type of work is also strongly aligned with one of the objectives of the CSIR, namely...

  9. Research Productivity and Social Capital in Australian Higher Education

    Science.gov (United States)

    Salaran, Mohammad

    2010-01-01

    This study investigates the role of social capital in raising research productivity in academic institutions. Social capital as a strategic resource embedded in social relationships can be utilised towards decreasing pressures from external environmental conditions, such as the global financial crisis. A survey was sent to academic staff in five…

  10. Research Productivity by Career Stage among Korean Academics

    Science.gov (United States)

    Jung, Jisun

    2014-01-01

    This study explores Korean academics' changes in research productivity by career stage. Career stage in this study is defined as a specific cohort based on one's length of job experience, with those in the same stage sharing similar interests, values, needs, and tasks; it is categorized into fledglings, maturing academics, established academics,…

  11. Evaluation assessment of Rail Freight Transportation Research and Development Program

    Energy Technology Data Exchange (ETDEWEB)

    1983-02-01

    This report presents an evaluation assessment of the Canadian Rail Freight Transportation Research and Development (R and D) Program. The assessment was to assist in preparing for an evaluation of the Program and to stimulate a better understanding of the broader issues and problems of evaluating R and D programs. In general, the objectives of the program are aimed at improving rail freight productivity, capacity, safety, cost, and the domestic and foreign competitive position of railway suppliers. This is to be acccomplished by stimulating a stronger industry commitment to R and D and inducing investment in new technology through joint federal-industry funding and participation in rail freight R and D projects. In view of the low funding levels of the Program, it is unlikely that it will have a significant direct impact upon these ultimate objectives. Impacts will likely only be achieved through the Program's ability to stimulate increased industrial R and D and investment in new technology. A model of the Program developed in the report shows that the critical linkages between the activities and objectives of the Program are the leadership or advocacy functions performed by the Program's managers and of the results of projects supported under the Program; and the processes of program planning and project selection. An assessment of the Program's structure indicates that there are no significant issues that would make the evaluation of the Program or its major components inadvisable. Twelve potential evaluation questions and the basic approaches required to address each of them are presented in the report. 5 figs., 10 tabs.

  12. Otolaryngology Residency Program Research Resources and Scholarly Productivity.

    Science.gov (United States)

    Villwock, Jennifer A; Hamill, Chelsea S; Nicholas, Brian D; Ryan, Jesse T

    2017-06-01

    Objective To delineate research resources available to otolaryngology residents and their impact on scholarly productivity. Study Design Survey of current otolaryngology program directors. Setting Otolaryngology residency programs. Subjects and Methods An anonymous web-based survey was sent to 98 allopathic otolaryngology training program directors. Fisher exact tests and nonparametric correlations were used to determine statistically significant differences among various strata of programs. Results Thirty-nine percent (n = 38) of queried programs responded. Fourteen (37%) programs had 11 to 15 full-time, academic faculty associated with the residency program. Twenty (53%) programs have a dedicated research coordinator. Basic science lab space and financial resources for statistical work were present at 22 programs (58%). Funding is uniformly provided for presentation of research at conferences; a minority of programs (13%) only funded podium presentations. Twenty-four (63%) have resident research requirements beyond the Accreditation Council for Graduate Medical Education (ACGME) mandate of preparing a "manuscript suitable for publication" prior to graduation. Twenty-five (67%) programs have residents with 2 to 3 active research projects at any given time. None of the investigated resources were significantly associated with increased scholarly output. There was no uniformity to research curricula. Conclusions Otolaryngology residency programs value research, evidenced by financial support provided and requirements beyond the ACGME minimum. Additional resources were not statistically related to an increase in resident research productivity, although they may contribute positively to the overall research experience during training. Potential future areas to examine include research curricula best practices, how to develop meaningful mentorship and resource allocation that inspires continued research interest, and intellectual stimulation.

  13. Consumers’ Knowledge about Product’s Country-of-Origin and Its Impact upon Sensorical Product Evaluation

    OpenAIRE

    Tina Vukasovic

    2015-01-01

    The aim of the research was to determine consumer perceptions of food products regarding the knowledge about the product’s origin and the potential impact on the sensorical evaluation of other product properties. The research results represent a deeper investigation of the impact of origin on consumer perceptions. An integrated approach to the research of impacts of product origin was chosen in order to form interlinks between knowledge about product origin and its other sen...

  14. Nondestructive testing and evaluation of wood : a worldwide research update

    Science.gov (United States)

    Brian K. Brashaw; Voichita Bucur; Ferenc Divos; Raquel Goncalves; Jianxiong Lu; Roger Meder; Roy F. Pellerin; Simon Potter; Robert J Ross; Xiping Wang; Yafang. Yin

    2009-01-01

    The international forest products research community is responding to these driving forces by conducting NDT/NDE research to provide the technologies needed to address these challenges. This article presents a sample of the on-going NDT/NDE research efforts being conducted in several areas of the world.

  15. Building and Evaluating Research Capacity in Healthcare Systems

    International Development Research Centre (IDRC) Digital Library (Canada)

    Dan Allman's work focuses on the social and structural production of risk and ... Ian Janssen's population-based research programme examines the role that physical inactivity .... United Nations Educational Scientific and Cultural Organization ...... research equipment and office space in which to accommodate researchers.

  16. Evaluating the Impact of a New Product on the Sales of other Products

    OpenAIRE

    Julian Andreev Vasilev

    2014-01-01

    The purpose of this article is to evaluate the impact of a new product on the sales of other products. Launching a new product may lead to increase or decrease of sales in the products of the same group. Customers may continue buying standard products or they may be oriented to new products. New products may cause internal competition. Statistical methods are applied. Time series analysis is used. Transactional database of a confectionary factory is the main source of data. The time series an...

  17. Research on the stability evaluation of slope

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2013-08-15

    In order to create the guideline corresponding to a new regulatory standard, such as criteria in the ground-slope stability evaluation method, we have conducted an analysis and discussion of the shaking table test results using a large slope model. As a result, it was found that in that phase of the vertical motion and the horizontal motion affects the amplification characteristics of the ground motion, need to be considered in assessing the safety of the slope and the influence of the phase difference amplification or local. We also conduct a study on countermeasure construction slope by shaking table test, the effect of the countermeasure construction of pile and anchors deterrence could be confirmed. Focusing on the new method can reproduce the behavior of large deformation and discontinuity, with respect to the advancement of slope analysis, we identify issues on the maintenance and code applicability of each analysis method. (author)

  18. The economic scientific research, a production neo-factor

    Directory of Open Access Journals (Sweden)

    Elena Ciucur

    2007-12-01

    Full Text Available The scientific research represents a modern production neo-factor that implies two groups of coordinates: preparation and scientific research. The scientific research represents a complex of elements that confer a new orientation of high performance and is materialized in resources and new availabilities brought in active shape by the contribution of the creators and by the attraction in a specific way in the economic circuit. It is the creator of new ideas, lifting the performance and understanding to the highest international standards of competitive economic efficiency. In the present, the role of the scientific research stands before some new challenges generated by the stage of society. It.s propose a unitary, coherent scientific research and educational system, created in corresponding proportions, based on the type, level and utility of the system, by the state, the economic-social environment and the citizen himself.

  19. Promoting and evaluating scientific rigour in qualitative research.

    Science.gov (United States)

    Baillie, Lesley

    2015-07-15

    This article explores perspectives on qualitative research and the variety of views concerning rigour in the research process. Evaluating and ensuring the quality of research are essential considerations for practitioners who are appraising evidence to inform their practice or research. Several criteria and principles for evaluating quality in qualitative research are presented, recognising that their application in practice is influenced by the qualitative methodology used. The article examines a range of techniques that a qualitative researcher can use to promote rigour and apply it to practice.

  20. [Example of product development by industry and research solidarity].

    Science.gov (United States)

    Seki, Masayoshi

    2014-01-01

    When the industrial firms develop the product, the research result from research institutions is used or to reflect the ideas from users on the developed product would be significant in order to improve the product. To state the software product which developed jointly as an example to describe the adopted development technique and its result, and to consider the modality of the industry solidarity seen from the company side and joint development. The software development methods have the merit and demerit and necessary to choose the optimal development technique by the system which develops. We have been jointly developed the dose distribution browsing software. As the software development method, we adopted the prototype model. In order to display the dose distribution information, it is necessary to load four objects which are CT-Image, Structure Set, RT-Plan, and RT-Dose, are displayed in a composite manner. The prototype model which is the development technique was adopted by this joint development was optimal especially to develop the dose distribution browsing software. In a prototype model, since the detail design was created based on the program source code after the program was finally completed, there was merit on the period shortening of document written and consist in design and implementation. This software eventually opened to the public as an open source. Based on this developed prototype software, the release version of the dose distribution browsing software was developed. Developing this type of novelty software, it normally takes two to three years, but since the joint development was adopted, it shortens the development period to one year. Shortening the development period was able to hold down to the minimum development cost for a company and thus, this will be reflected to the product price. The specialists make requests on the product from user's point of view are important, but increase in specialists as professionals for product

  1. Fission product yield evaluation for the USA evaluated nuclear data files

    International Nuclear Information System (INIS)

    Rider, B.F.; England, T.R.

    1994-01-01

    An evaluated set of fission product yields for use in calculation of decay heat curves with improved accuracy has been prepared. These evaluated yields are based on all known experimental data through 1992. Unmeasured fission product yields are calculated from charge distribution, pairing effects, and isomeric state models developed at Los Alamos National Laboratory. The current evaluation has been distributed as the ENDF/B-VI fission product yield data set

  2. Evaluation of a Research Mentorship Program in Community Care

    Science.gov (United States)

    Ploeg, Jenny; de Witt, Lorna; Hutchison, Brian; Hayward, Lynda; Grayson, Kim

    2008-01-01

    This article describes the results of a qualitative case study evaluating a research mentorship program in community care settings in Ontario, Canada. The purpose of the program was to build evaluation and research capacity among staff of community care agencies through a mentorship program. Data were collected through in-depth, semi-structured…

  3. Evaluation of microsilica admixture for production of high strength concrete.

    Science.gov (United States)

    1990-08-01

    This study consisted of a laboratory evaluation of the effect of microsilica on the physical properties of both plastic and hardened portland cement concrete. Microsilica (silica fume) is a by-product of the industrial manufacture of ferro silicon an...

  4. Evaluation of the productive performance characteristics of red ...

    African Journals Online (AJOL)

    Evaluation of the productive performance characteristics of red tilapia ( Oreochromis sp.) injected with shark DNA into skeletal muscles and maintained diets containing different levels of probiotic and amino yeast.

  5. Some products from CLRI under clinical use and evaluation

    Indian Academy of Sciences (India)

    First page Back Continue Last page Overview Graphics. Some products from CLRI under clinical use and evaluation. As burn dressing materials. As wound healing support system. In dentistry: in treatment of gingivial recession. In ophthalmology: as lens support system.

  6. Evaluation of Biodiesel Production, Engine Performance, and Emissions

    Science.gov (United States)

    Gürü, Metin; Keskïn, Ali

    2016-08-01

    Nowadays, to decrease environmental pollution and dependence on fossil-based fuels, research on alternative renewable energy sources has been increasing. One such renewable energy source is biodiesel, which is used as an alternative fuel for diesel engines. Biodiesel is renewable, nontoxic, biodegradable, and environmentally friendly. Biodiesel is domestically produced from vegetable oil (edible or nonedible), animal fat, and used cooking oils. In the biodiesel production process, oil or fat undergoes transesterification reaction through use of simple alcohols such as methanol, ethanol, propanol, butanol, etc. Use of methanol is most feasible because of its low cost, and physical and chemical advantages. Acid catalysis, alkali catalysis, and enzyme catalysis are usually used to improve the reaction rate and yield. Glycerol is a byproduct of the reaction and can be used as an industrial raw material. In this study, biodiesel production methods (direct use, pyrolysis, microemulsion, transesterification, supercritical processes, ultrasound- assisted, and microwave-assisted) and types of catalyst (homogeneous, heterogeneous, and enzyme) have been evaluated and compared. In addition, the effects of biodiesel and its blends on diesel engine performance and exhaust emissions are described and reviewed.

  7. Chosen aspects of evaluation of productive processes on the example of productive chains of gear

    OpenAIRE

    M. Roszak

    2005-01-01

    Purpose: The purpose of the study was to present an original approach to evaluation of the real productive chains, including its utilization as a benchmarking method.Design/methodology/approach: In the paper an analysis of value in the productive chains with account of activities based costs was used. The evaluation of the effectivity was made by econometric coefficients.Findings: The paper presents obtained particular results of the analysis of value in the productive chains indicating effec...

  8. Research governance and scientific knowledge production in The Gambia

    Directory of Open Access Journals (Sweden)

    Frederick U. Ozor

    2014-09-01

    Full Text Available Public research institutions and scientists are principal actors in the production and transfer of scientific knowledge, technologies and innovations for application in industry as well for social and economic development. Based on the relevance of science and technology actors, the aim of this study was to identify and explain factors in research governance that influence scientific knowledge production and to contribute to empirical discussions on the impact levels of different governance models and structures. These discussions appear limited and mixed in the literature, although still are ongoing. No previous study has examined the possible contribution of the scientific committee model of research governance to scientific performance at the individual level of the scientist. In this context, this study contributes to these discussions, firstly, by suggesting that scientific committee structures with significant research steering autonomy could contribute not only directly to scientific output but also indirectly through moderating effects on research practices. Secondly, it is argued that autonomous scientific committee structures tend to play a better steering role than do management-centric models and structures of research governance.

  9. An Optimization Study on Syngas Production and Economic Evaluation

    Directory of Open Access Journals (Sweden)

    Qasim Faraz

    2016-01-01

    Full Text Available Syngas production in Gas-to-liquid (GTL process is focused in past by several researchers to increase the production with minimal capital and operating costs. In this study, syngas production process is simulated and optimized to increase its production and the economic analysis is studied for the proposed optimized process. Aspen HYSYS v8.4 is used for all process simulation work in this article. A new configuration is rigorously simulated while using auto-thermal reforming. Results exhibit a tremendous rise in production of syngas.

  10. Improving product development practice: An action-research based approach

    DEFF Research Database (Denmark)

    Harmsen, Hanne

    In studies of new product development it has often been concluded that to a large extent new product suc-cess is tunder the influence of companies and long lists of direct norma-tive guide-lines have been formulated. Nevertheless descriptive studi that deve-lopment practice is still far from...... studies both purely descriptive and studies identifying success and failure factors, but almost no studies of how companies actually undertake improve-ments, which problems they encounter,, and how/whether they overcome these problems. Action research is proposed as a suitable method for studying...

  11. Profession based research through Action research. Framing knowledge production in an interdisciplinary perspective

    DEFF Research Database (Denmark)

    Tofteng, Ditte Maria Børglum; Bladt, Mette; Husted, Mia

    to work on tendencies to privilege some types of knowledge above others when it comes to knowledge production and research processes. The participatory worldview mandates action researchers to consider participants as a collaborative resource and agents of cyclical transformation who bring to the table...... practical knowledge and experience about situations while the recurring pattern of reflection, analysis and action contributes to the constant evolution and redefinition of the original goal. Methodology, Methods, Research Instruments or Sources Used This paper is a theoretical reflection on actions...... will be an reflection on action research and participatory research processes as an asvwer to developing a vocational research practice that goes beyond quantitative an qualitative methodologies and into to research as an research and development process. References Bladt, M. (2012): Frirum og værksteder I Duus m...

  12. Production and evaluation of (multimodal) answers to medical questions

    NARCIS (Netherlands)

    van Hooijdonk, C.M.J.; Krahmer, E.; Maes, A.; Theune, Mariet; Bosma, W.E.; Maes, A.; Ainsworth, S.

    This paper describes two experiments carried out to investigate the production and evaluation of multimodal answer presentations in the context of a medical question answering system. In a production experiment participants had to produce answers to different types of questions. The results show

  13. In vitro evaluation of commercial probiotic products used for marine ...

    African Journals Online (AJOL)

    In vitro evaluation of commercial probiotic products used for marine shrimp cultivation in Thailand. ... Journal Home > Vol 10, No 22 (2011) > ... labels as regards the number and types of microorganisms and acceptability of the number of probiotic microorganisms at 10,sup>6 colony forming unit (CFU)/g in the products.

  14. Country-of-origin effects on consumer product evaluations

    NARCIS (Netherlands)

    Verlegh, P.W.J.

    2001-01-01

    This thesis intends to provide a better understanding of the influence of country of origin on consumers' product evaluations. The first chapter explains why consumers attach importance to the country of origin of products. Next to "made in …" labels, there are various ways in which

  15. Resource Evaluation and Site Selection for Microalgae Production in India

    Energy Technology Data Exchange (ETDEWEB)

    Milbrandt, A.; Jarvis, E.

    2010-09-01

    The study evaluates climate conditions, availability of CO2 and other nutrients, water resources, and land characteristics to identify areas in India suitable for algae production. The purpose is to provide an understanding of the resource potential in India for algae biofuels production and to assist policymakers, investors, and industry developers in their future strategic decisions.

  16. Product evaluation of in situ vitrification engineering, Test 4

    International Nuclear Information System (INIS)

    Loehr, C.A.; Weidner, J.R.; Bates, S.O.

    1991-09-01

    This report is one of several that evaluates the In Situ Vitrification (ISV) Engineering-Scale Test 4 (ES-4). This document describes the chemical and physical composition, microstructure, and leaching characteristics of ES-4 product samples; these data provide insight into the expected performance of a vitrified product in an ISV buried waste application similar to that studied in ES-4

  17. EXPERIMENTAL RESEARCH REGARDING LEATHER APPLICATIONS IN PRODUCT DESIGN

    Directory of Open Access Journals (Sweden)

    PRALEA Jeni

    2015-05-01

    Full Text Available This paper presents the role and importance of experimental research in design activity. The designer, as a researcher and a project manager, proposes to establish a relationship between functional-aesthetic-constructive-technological-economic,based on the aesthetic possibilities of the materials used for the experiments. With the aim to identify areas for the application of leather waste resulted from the production process, the paper presents experiments conducted with this material in combination with wood, by using different techniques that lead to different aesthetic effects. Identifying the areas to use and creating products from leather and/or wood waste, is based on the properties of these materials. Leather, the subject of these experiments, has the advantage that it can be used on both sides. Tactile differences of the two sides of this material has both aesthetical and functional advantages, which makes it suitable for applications on products that meet the requirements of "design for all". With differentiated tactile characteristics, in combination with other materials, for these experiments wood, easily "read touch" products can be generated to help people with certain disabilities. Thus, experiments presented in this paper allows the establishment of aesthetic schemes applicable to products that are friendly both with the environment (based on the reuse of wood and leather waste and with the users (can be used as applications, accessories and concepts of products for people with certain disabilities. The designer’s choices or decisions can be based on the results of this experiment. The experiment enables the designer to develop creative, innovative and environmentally friendly products.

  18. Product meaning, affective use evaluation, and transfer : a preliminary study

    OpenAIRE

    Helfenstein, Sacha

    2005-01-01

    The first part of this investigation explored the multidimensional nature of product meaning, referring to the variety of connotations and functions a consumer associates with a particular product category. The subsequent experiment examined the moderation effects of product meaning and other attributes of the user on (a) the affective evaluation of an obstructed use interaction, and (b) the transfer of emotion between devices presented as being either of the same or a different brand. Althou...

  19. Analysis and Evaluation of Cooking Parameters for Sweet Bakery Products

    OpenAIRE

    Giuseppe Vignali; Andrea Volpi

    2013-01-01

    Cooking process is essential for the preparation of sweet bakery products, such as Panettone, a typical Italian seasonal dessert. This study is aimed at evaluating the features of the finished product leaving the oven chamber using the Design of Experiments technique. Four features of the product like “water activity”, “humidity”, “pH” and “sensorial judge” have been explained as functions of independent variables: recipe of the dough, affecting the dough strength and cooking process paramete...

  20. Outlining an analytical framework for mapping research evaluation landscapes

    Energy Technology Data Exchange (ETDEWEB)

    Åström, F.

    2016-07-01

    This paper suggests an infrastructure perspective, as suggested by Star and Bowker (2006), as an analytical framework for studying the research evaluation landscape. An infrastructure is suggested to be understood, not as a concrete technology, but as a system of contextual factors including ‘Actors/Stakeholders’, ‘Technical systems’, and ‘Evaluation practices’. How the framework can be operationationalized is exemplified by examples from previous and ongoing research, as well as by identify gaps in current research. (Author)

  1. Research on psychological evaluation method for nuclear power plant operators

    International Nuclear Information System (INIS)

    Fang Xiang; He Xuhong; Zhao Bingquan

    2007-01-01

    The qualitative and quantitative psychology evaluation methods to the nuclear power plant operators were analyzed and discussed in the paper. The comparison analysis to the scope and result of application was carried out between method of outline figure fitted and method of fuzzy synthetic evaluation. The research results can be referenced to the evaluation of nuclear power plant operators. (authors)

  2. Research and production of knowledge in Social Work

    Directory of Open Access Journals (Sweden)

    Aldaíza Sposati

    2007-05-01

    Full Text Available This article concerns research paths in the field of Social Work. It begins with the polemic concerning the potential and ability of Social Work as a social practice to produce knowledge. It revives the debate concerning the "war of the sciences" between physicists and mathematicians with social analysts, in which the later do not recognize the scientific dimension of research in the social realm. It analyzes the growth of scientific production in Social Work through dissertations and theses in the Graduate Social Work Program. To do so it comments on the analyses of Iamamoto, Silva and Silva and Carvalho and indicates the need to establish a research policy, orient the epistemic community in Social Work and organize a network of researchers centers.

  3. New approaches to the economic evaluation of fusion research

    International Nuclear Information System (INIS)

    Hazelrigg, G.A.; Lietzke, K.R.

    1978-01-01

    The economic evaluation of fusion research to date has focussed on the benefits of essentially unlimited energy for future generations. In this paper it is shown that energy research in general, and fusion research in particular, also provides benefits in the short term, benefitting us today as well as future generations. Short-term benefits are the result of two distinct aspects of fusion research. First, fusion research provides information for decision making on both the continuing fusion research efforts and on other energy research programs. Second, fusion research provides an expectation of a future energy source thereby promoting accelerated consumption of existing fossil fuels today. Both short-term benefits can be quantitatively evaluated and both are quite substantial. Together, these short-term benefits form the primary economic rationale for fusion research

  4. Hydrogen production from water: Recent advances in photosynthesis research

    Energy Technology Data Exchange (ETDEWEB)

    Greenbaum, E.; Lee, J.W. [Oak Ridge National Lab., TN (United States). Chemical Technology Div.

    1997-12-31

    The great potential of hydrogen production by microalgal water splitting is predicated on quantitative measurement of the algae`s hydrogen-producing capability, which is based on the following: (1) the photosynthetic unit size of hydrogen production; (2) the turnover time of photosynthetic hydrogen production; (3) thermodynamic efficiencies of conversion of light energy into the Gibbs free energy of molecular hydrogen; (4) photosynthetic hydrogen production from sea water using marine algae; (5) the potential for research advances using modern methods of molecular biology and genetic engineering to maximize hydrogen production. ORNL has shown that sustained simultaneous photoevolution of molecular hydrogen and oxygen can be performed with mutants of the green alga Chlamydomonas reinhardtii that lack a detectable level of the Photosystem I light reaction. This result is surprising in view of the standard two-light reaction model of photosynthesis and has interesting scientific and technological implications. This ORNL discovery also has potentially important implications for maximum thermodynamic conversion efficiency of light energy into chemical energy by green plant photosynthesis. Hydrogen production performed by a single light reaction, as opposed to two, implies a doubling of the theoretically maximum thermodynamic conversion efficiency from {approx}10% to {approx}20%.

  5. Research of CITP-II tritium production irradiation device design

    International Nuclear Information System (INIS)

    Zhang Zhihua; Deng Yongjun; Mi Xiangmiao; Li Rundong; Liu Zhiyong

    2012-01-01

    As the core component of CITP-II, the online tritium production irradiation device is the pivotal equipment in the research on tritium production and release of tritium breeders. The design of CITP-II online tritium production irradiation device creatively makes replacing the breeders online come true; as tritium production capacity, the self-shielding factor of device, and neutron flux were studied. The influence of different load models and load thicknesses of breeders to tritium production capacity was calculated. The hydrodynamics parameters of device in solid-gas phase were computed. Thermal parameters, such as the heat power of breeders, hotspot, temperature grads distributions, utmost temperature, uneven factors, were analyzed. Creatively designed nonlinear electric heater equalized breeders' even heat power. The influence laws of the components, pressure of gap gas and carrier gas to the balance temperature were got. And the key thermal parameters were ascertained. The key thermal parameters and the changing laws were got and provide the basis for structural optimization and safety analysis. They can also be referenced for the study of breeders' tritium production and release. (authors)

  6. EVALUE : a computer program for evaluating investments in forest products industries

    Science.gov (United States)

    Peter J. Ince; Philip H. Steele

    1980-01-01

    EVALUE, a FORTRAN program, was developed to provide a framework for cash flow analysis of investment opportunities. EVALUE was designed to assist researchers in evaluating investment feasibility of new technology or new manufacturing processes. This report serves as user documentation for the EVALUE program. EVALUE is briefly described and notes on preparation of a...

  7. Situated Research Design and Methodological Choices in Formative Program Evaluation

    Science.gov (United States)

    Supovitz, Jonathan

    2013-01-01

    Design-based implementation research offers the opportunity to rethink the relationships between intervention, research, and situation to better attune research and evaluation to the program development process. Using a heuristic called the intervention development curve, I describe the rough trajectory that programs typically follow as they…

  8. New evaluation tool now available to assess research quality | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    2016-04-25

    Apr 25, 2016 ... New evaluation tool now available to assess research quality ... Ratings on a scale defined by rubrics, to indicate the level at which a project ... Report: The value-for-money discourse: risks and opportunities for research for development ... Copyright · Open access policy · Privacy policy · Research ethics ...

  9. Usability Evaluation of a Research Repository and Collaboration Web Site

    Science.gov (United States)

    Zhang, Tao; Maron, Deborah J.; Charles, Christopher C.

    2013-01-01

    This article reports results from an empirical usability evaluation of Human-Animal Bond Research Initiative Central as part of the effort to develop an open access research repository and collaboration platform for human-animal bond researchers. By repurposing and altering key features of the original HUBzero system, Human-Animal Bond Research…

  10. Research Evaluation and the Assessment of Public Value

    Science.gov (United States)

    Molas-Gallart, Jordi

    2015-01-01

    Funding organisations are increasingly asking academics to show evidence of the economic and social value generated by their research. These requests have often been associated with the emergence of a so-called "new social contract for research" and are related to the implementation of new research evaluation systems. Although the…

  11. Evaluation of research projects Perspectives for applied research in food and agriculture

    DEFF Research Database (Denmark)

    Pedersen, S.M.; Boesen, M.V.; Baker, D.

    2011-01-01

    In this study, the task of evaluating research projects’ relevance and scientific quality is addressed, and a pilot study is executed for five Danish food and agricultural research programmes. Literature reviewed emphasises the importance of context, of consistency and transparency and of the cost...... of evaluation. Moreover, the purpose of research evaluation is thoroughly examined. The method developed and implemented addresses each of these concerns, particularly by employing simple measures and by complementing quantitative analysis with qualitative exercises featuring structured stakeholder interviews...

  12. Scientific production of Vice Chancellors for Research in Peruvian universities with a medical school.

    Science.gov (United States)

    Herrera-Añazco, Percy; Valenzuela-Rodríguez, Germán; Pacheco-Mendoza, Josmel; Málaga, Germán

    2017-10-19

    To determine the scientific production of Research Vice-chancellors at Peruvian universities that have medical schools, as well as their academic degrees as an indirect way to evaluate their suitability for the position they hold. We searched all Peruvian universities that register medical schools. Of these, the scientific production of the universities registered in SCOPUS was identified in September of the 2016. The scientific production of the vice chancellors of investigation of these faculties of medicine was determined through the search of its scientific publications registered in SCOPUS and those reported in the National Registry of Researchers in Science and Technology. Academic degrees were obtained from the database of the National Superintendence of Higher University Education. The sample included 28 research vice chancellors. Only 4/28 had any publications. The average number of articles published by the vice chancellors of research was 1.71, the number of citations 23.1 on average and the H index 0.64. Besides, 22 Vice-chancellors of research had the degree of doctor, four had the degree of bachelor and two the degree of master. The scientific production of research vice chancellors is poor. The required academic grade requirement for the position is not met in all cases. It is likely that, having no research experience, his leadership in directing a university's research policies may be questioned.

  13. Current utilization of research reactor on radioisotopes production in China

    Energy Technology Data Exchange (ETDEWEB)

    Liu Yishu [Nuclear Power Institute of China, Chengdu (China)

    2000-10-01

    The main technical parameters of the four research reactors and their current utilization status in radioisotope manufacture and labeling compounds preparation are described. The radioisotopes, such as Co-60 sealed source, Ir-192 sealed source, {gamma}-knife source, I-131, I-125, Sm-153, P-32 series products, In-113m generator, Tc-99m gel generator, Re-188 gel generator, C-14, Ba-131, Sr-89, {sup 90}Y, etc., and their labeling compounds prepared from the reactor produced radionuclides, such as I-131-MIBG, I-131-Hippure, I-131-capsul, Sm-153-EDTMP, Re-186-HEDP, Re-186-HA, C-14-urea, and radioimmunoassay kits etc. are presented as well. Future development plan of radioisotopes and labeling compounds in China is also given. Simultaneously, the possibility and methods of bilateral or multilateral co-operation in utilization of research reactor, personnel and technology exchange of radioisotope production and labeling compounds is also discussed. (author)

  14. Current utilization of research reactor on radioisotopes production in China

    International Nuclear Information System (INIS)

    Liu Yishu

    2000-01-01

    The main technical parameters of the four research reactors and their current utilization status in radioisotope manufacture and labeling compounds preparation are described. The radioisotopes, such as Co-60 sealed source, Ir-192 sealed source, γ-knife source, I-131, I-125, Sm-153, P-32 series products, In-113m generator, Tc-99m gel generator, Re-188 gel generator, C-14, Ba-131, Sr-89, 90 Y, etc., and their labeling compounds prepared from the reactor produced radionuclides, such as I-131-MIBG, I-131-Hippure, I-131-capsul, Sm-153-EDTMP, Re-186-HEDP, Re-186-HA, C-14-urea, and radioimmunoassay kits etc. are presented as well. Future development plan of radioisotopes and labeling compounds in China is also given. Simultaneously, the possibility and methods of bilateral or multilateral co-operation in utilization of research reactor, personnel and technology exchange of radioisotope production and labeling compounds is also discussed. (author)

  15. Evaluation of relational database products for the VAX

    International Nuclear Information System (INIS)

    Kannan, K.L.

    1985-11-01

    Four commercially available database products for the VAX/VMS operating system were evaluated for relative performance and ease of use. The products were DATATRIEVE, INGRES, Rdb, and S1032. Performance was measured in terms of elapsed time, CPU time, direct I/O counts, buffered I/O counts, and page faults. East of use is more subjective and has not been quantified here; however, discussion and tables of features as well as query syntax are included. This report describes the environment in which these products were evaluated and the characteristics of the databases used. All comparisons must be interpreted in the context of this setting

  16. Evaluation of relational database products for the VAX

    Energy Technology Data Exchange (ETDEWEB)

    Kannan, K.L.

    1985-11-01

    Four commercially available database products for the VAX/VMS operating system were evaluated for relative performance and ease of use. The products were DATATRIEVE, INGRES, Rdb, and S1032. Performance was measured in terms of elapsed time, CPU time, direct I/O counts, buffered I/O counts, and page faults. East of use is more subjective and has not been quantified here; however, discussion and tables of features as well as query syntax are included. This report describes the environment in which these products were evaluated and the characteristics of the databases used. All comparisons must be interpreted in the context of this setting.

  17. Nuclear data for the production of therapeutic radionuclides. Summary report of third research coordination meeting

    International Nuclear Information System (INIS)

    Sublet, J.-Ch.; Capote Noy, R.

    2006-08-01

    A summary is given of the Third Research Coordination Meeting on Nuclear Data for the Production of Therapeutic Radionuclides. The new library of evaluated cross-section will cover reactor and accelerator production of therapeutic radionuclides to appropriate specific activities and purity, along with the relevant decay data. A few new reactions were added at this meeting. Technical discussions and the resulting work plan to conclude the data evaluation activities are summarized for every reaction path. Timescales and agreed actions to deliver the database and Technical Report are also given. (author)

  18. Biocatalyzed processes for production of commodity chemicals: Assessment of future research advances for N-butanol production

    Science.gov (United States)

    Ingham, J. D.

    1984-01-01

    This report is a summary of assessments by Chem Systems Inc. and a further evaluation of the impacts of research advances on energy efficiency and the potential for future industrial production of acetone-butanol-ethanol (ABE) solvents and other products by biocatalyzed processes. Brief discussions of each of the assessments made by CSI, followed by estimates of minimum projected energy consumption and costs for production of solvents by ABE biocatalyzed processes are included. These assessments and further advances discussed in this report show that substantial decreases in energy consumption and costs are possible on the basis of specific research advances; therefore, it appears that a biocatalyzed process for ABE can be developed that will be competitive with conventional petrochemical processes for production of n-butanol and acetone. (In this work, the ABE process was selected and utilized only as an example for methodology development; other possible bioprocesses for production of commodity chemicals are not intended to be excluded.) It has been estimated that process energy consumption can be decreased by 50%, with a corresponding cost reduction of 15-30% (in comparison with a conventional petrochemical process) by increasing microorganism tolerance to n-butanol and efficient recovery of product solvents from the vapor phase.

  19. ARM Climate Research Facility Quarterly Value-Added Product Report

    Energy Technology Data Exchange (ETDEWEB)

    Sivaraman, Chitra

    2014-01-14

    The purpose of this report is to provide a concise status update for value-added products (VAP) implemented by the Atmospheric Radiation Measurement Climate Research Facility. The report is divided into the following sections: (1) new VAPs for which development has begun, (2) progress on existing VAPs, (3) future VAPs that have been recently approved, (4) other work that leads to a VAP, and (5) top requested VAPs from the archive.

  20. Research of beekeeping products using as radioprotectors for plants

    Directory of Open Access Journals (Sweden)

    I. О. Oginova

    2006-12-01

    Full Text Available Research conducted on a winter wheat, which was cultivated in a 30-km area in the year ofChernobylaccident, allowed to ascertain that complex use of sodium humate and beekeeping products is ineffective for diminishing the negative irradiation influence on the early growth processes of plants. Only the simultaneous use of humic preparations and anodic extraction of propolis has permanent positive effect.

  1. Irradiated fuel by-product separation research in Canada

    International Nuclear Information System (INIS)

    Burston, M.

    1984-01-01

    Although no decision has been made to reprocess irradiated CANDU fuel, by-product separation research has recently been initiated in Canada because of its potential importance to Canadian research programs in advanced fuel cycles (especially U/Pu cycle development in the near term) and nuclear waste management. In addition, separated by-products could have a significant commercial potential. Demonstrated applications include: heat sources, gamma radiation sources, light sources, new materials for productions of other useful isotopes, etc. For illustrative purposes the calculated market value of by-products currently stored in irradiated CANDU fuel is approximately $210/kgU. Ontario Hydro has initiated a program to study the application of new separation technolgies, such as laser-based techniques and the plasma ion cyclotron resonance separation technique, to either augment and/or supplant the chemical extraction methods. The main goal is to develop new, more economical extraction methods in order to increase the magnitude of the advantages resulting from this approach to reprocessing. (author)

  2. A PRODUCTIVITY EVALUATION MODEL BASED ON INPUT AND OUTPUT ORIENTATIONS

    Directory of Open Access Journals (Sweden)

    C.O. Anyaeche

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Many productivity models evaluate either the input or the output performances using standalone techniques. This sometimes gives divergent views of the same system’s results. The work reported in this article, which simultaneously evaluated productivity from both orientations, was applied on real life data. The results showed losses in productivity (–2% and price recovery (–8% for the outputs; the inputs showed productivity gain (145% but price recovery loss (–63%. These imply losses in product performances but a productivity gain in inputs. The loss in the price recovery of inputs indicates a problem in the pricing policy. This model is applicable in product diversification.

    AFRIKAANSE OPSOMMING: Die meeste produktiwiteitsmodelle evalueer of die inset- of die uitsetverrigting deur gebruik te maak van geïsoleerde tegnieke. Dit lei soms tot uiteenlopende perspektiewe van dieselfde sisteem se verrigting. Hierdie artikel evalueer verrigting uit beide perspektiewe en gebruik ware data. Die resultate toon ‘n afname in produktiwiteit (-2% en prysherwinning (-8% vir die uitsette. Die insette toon ‘n toename in produktiwiteit (145%, maar ‘n afname in prysherwinning (-63%. Dit impliseer ‘n afname in produkverrigting, maar ‘n produktiwiteitstoename in insette. Die afname in die prysherwinning van insette dui op ‘n problem in die prysvasstellingbeleid. Hierdie model is geskik vir produkdiversifikasie.

  3. African Primary Care Research: Performing a programme evaluation

    OpenAIRE

    Dudley, Lilian

    2014-01-01

    Abstract This article is part of a series on Primary Care Research in the African context and focuses on programme evaluation. Different types of programme evaluation are outlined: developmental, process, outcome and impact. Eight steps to follow in designing your programme evaluation are then described in some detail: engage stakeholders; establish what is known; describe the programme; define the evaluation and select a study design; define the indicators; plan and manage data collection an...

  4. INTEGRAL CRITERIA FOR EVALUATION OF SCIENTIFIC AND TECHNICAL RESEARCH

    Directory of Open Access Journals (Sweden)

    Stanislav Nazarevich

    2015-09-01

    Full Text Available In the paper, we develop approaches to the estimation of production enterprises based on the criteria of classification of products, goods and services to innovative products. Developed their qualitative scale for interpreting the results of the evaluation, blind spots, which were not included in the intervals, are compensated by the use of fuzzy sets. In the presented method uses integral criterion based on fuzzy accessory products specific form. The obtained numerical values of the integral criterion reflect the adequacy of the technical characteristics to determine the form of new products, as well as identifying the characteristics of the gap to peers and benchmarks. The technique is applicable to the assessment processes of innovation and competitiveness of new and current products, as well as in dealing with the definition of the innovative features of the new products.

  5. 36 CFR 1193.23 - Product design, development, and evaluation.

    Science.gov (United States)

    2010-07-01

    ... following factors, as the manufacturer deems appropriate: (1) Where market research is undertaken, including individuals with disabilities in target populations of such research; (2) Where product design, testing, pilot... to validate any unproven access solutions through testing with individuals with disabilities or with...

  6. 47 CFR 6.7 - Product design, development, and evaluation.

    Science.gov (United States)

    2010-10-01

    ... factors, as the manufacturer deems appropriate: (1) Where market research is undertaken, including individuals with disabilities in target populations of such research; (2) Where product design, testing, pilot... to validate any unproven access solutions through testing with individuals with disabilities or with...

  7. Profile and scientific production of CNPq researchers in Nephrology and Urology.

    Science.gov (United States)

    Oliveira, Eduardo A; Pécoits-Filho, Roberto; Quirino, Isabel G; Oliveira, Maria Christina; Martelli, Daniela Reis; Lima, Leonardo S; Martelli, Hercílio

    2011-03-01

    This study aimed at evaluating the profile and scientific production of researchers in Nephrology and Urology, receiving grants in the area of Clinical Medicine from the Brazilian National Research Council. The standardized online curriculum vitae (Curriculum Lattes) of 39 researchers in Medicine receiving grants in the 2006-2008 triennium were included in the analysis. The variables analyzed were: gender, affiliation, time from completion of the PhD program, scientific production, and supervision of undergraduate students, and master's and PhD programs. Males (74.4%) and category 2 grants (56.4%) predominated. The following three Brazilian states are responsible for 90% of the researchers: São Paulo (28; 71.8%); Rio Grande do Sul (4; 10.3%); and Minas Gerais (3; 7.7%). Four institutions are responsible for 70% of the researchers: UNIFESP (14; 36%); USP (8; 20.5%); UFMG (3, 7.7%); and UNICAMP (3; 7.7%). Considering the academic career, the assessed researchers published 3,195 articles in medical journals, with a median of 75 articles per researcher (QI = 52-100). The researchers received a total of 25,923 citations at the database Web of Science®, with a median of 452 citations per researcher (QI = 161-927). The average number of citations per article was 13.8 citations (SD = 11.6). The Southeastern region of Brazil concentrates researchers in Nephrology and Urology. Our study has shown an increase in the scientific production of most researchers in the last five years. By knowing the profile of researchers in Nephrology and Urology, more effective strategies to encourage the scientific production and the demand for resources to finance research projects can be defined.

  8. Utilization of the Dalat Research Reactor for Radioisotope Production, Neutron Activation Analysis, Research and Training

    International Nuclear Information System (INIS)

    Nguyen Nhi Dien; Duong Van Dong; Cao Dong Vu; Nguyen Xuan Hai

    2013-01-01

    The Dalat Nuclear Research Reactor (DNRR) is a 500 kW pool type reactor loaded with a mixed core of HEU (36% enrichment) and LEU (19.75% enrichment) fuel assemblies. The reactor is used as a neutron source for the purposes of radioisotopes production, neutron activation analysis, basic and applied research and training. The reactor is operated mainly in continuous runs of 108 hours for cycles of 3–4 weeks for the above mentioned purposes. The current status of safety, operation and utilization of the reactor is given and some aspects for improvement of commercial products and services of the DNRR are also discussed in this paper. (author)

  9. Improvement of animal production through research using radioisotopes and radiation

    International Nuclear Information System (INIS)

    1976-01-01

    High birth rates coupled with greater longevity continue to increase the.world's population, especially in the less developed countries. The prevention of undernutrition and ultimately starvation will only be averted by increased food production and more efficient use of that food. At the same time people who have largely subsisted upon plant food diets and whose standards of living are rising, want to increase the use of animal products in order to upgrade their diets. To provide this high quality food animal scientists must find ways of increasing the supply especially in the less developed countries. Since most of the available pasture lands are presently being fully utilized or overgrazed, improved efficiency of the present herds and use of agroindustrial wastes are the only methods left to increase production significantly. The use of radioisotopes and radiation in research are making major contributions to the understanding of the processes necessary to achieve better animal production. In order to provide a forum for exchange of information in this field, the FAO/IAEA Joint Division of Atomic Energy in Food and Agriculture organized an international symposium, held in Vienna, from 2?6 February, on the use of nuclear techniques in animal production. Among the topics discussed at the symposium were: Soil-plant-animal relations regarding minerals, Trace elements in animal nutrition, Calcium, phosphorus and magnesium metabolism, Protein (nitrogen) metabolism - ruminants Protein (nitrogen) metabolism - non-ruminants Nuclear techniques in the control of parasitic infections Animal endocrinology with special emphasis on radioimmunoassays

  10. Improvement of animal production through research using radioisotopes and radiation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1976-07-01

    High birth rates coupled with greater longevity continue to increase the.world's population, especially in the less developed countries. The prevention of undernutrition and ultimately starvation will only be averted by increased food production and more efficient use of that food. At the same time people who have largely subsisted upon plant food diets and whose standards of living are rising, want to increase the use of animal products in order to upgrade their diets. To provide this high quality food animal scientists must find ways of increasing the supply especially in the less developed countries. Since most of the available pasture lands are presently being fully utilized or overgrazed, improved efficiency of the present herds and use of agroindustrial wastes are the only methods left to increase production significantly. The use of radioisotopes and radiation in research are making major contributions to the understanding of the processes necessary to achieve better animal production. In order to provide a forum for exchange of information in this field, the FAO/IAEA Joint Division of Atomic Energy in Food and Agriculture organized an international symposium, held in Vienna, from 2?6 February, on the use of nuclear techniques in animal production. Among the topics discussed at the symposium were: Soil-plant-animal relations regarding minerals, Trace elements in animal nutrition, Calcium, phosphorus and magnesium metabolism, Protein (nitrogen) metabolism - ruminants Protein (nitrogen) metabolism - non-ruminants Nuclear techniques in the control of parasitic infections Animal endocrinology with special emphasis on radioimmunoassays.

  11. Contribution of health researches in national knowledge production: A scientometrics study on 15-year research products of Iran

    Directory of Open Access Journals (Sweden)

    Shirin Djalalinia

    2017-01-01

    Full Text Available Background: Researchers, practitioners, and policymakers call for updated valid evidence to monitor, prevent, and control of alarming trends of health problems. To respond to these needs, health researches provide the vast multidisciplinary scientific fields. We quantify the national trends of health research outputs and its contribution in total science products. Methods: We systematically searched Scopus database with the most coverage in health and biomedicine discipline as the only sources for multidisciplinary citation reports, for all total and health-related publications, from 2000 to 2014. These scientometrics analyses covered the trends of main index of scientific products, citations, and collaborative papers. We also provided information on top institutions, journals, and collaborative research centers in the fields of health researches. Results: In Iran, over a 15-year period, 237,056 scientific papers have been published, of which 81,867 (34.53% were assigned to health-related fields. Pearson's Chi-square test showed significant time trends between published papers and their citations. Tehran University of Medical Sciences was responsible for 21.87% of knowledge productions share. The second and the third ranks with 11.15% and 7.28% belonged to Azad University and Shahid Beheshti University of Medical Sciences, respectively. In total fields, Iran had the most collaborative papers with the USA (4.17%, the UK (2.41%, and Canada (0.02%. In health-related papers, similar patterns of collaboration followed by 4.75%, 2.77%, and 1.93% of papers. Conclusions: Despite the ascending trends in health research outputs, more efforts required for the promotion of collaborative outputs that cause synergy of resources and the use of practical results. These analyses also could be useful for better planning and management of planning and conducting studies in these fields.

  12. Research and development of HTTR hydrogen production systems

    International Nuclear Information System (INIS)

    Shiozawa, Shusaku; Ogawa, Masuro; Inagaki, Yoshiyuki; Onuki, Kaoru; Takeda, Tetsuaki; Nishihara, Tetsuo; Hayashi, Koji; Kubo, Shinji; Inaba, Yoshitomo; Ohashi, Hirofumi

    2002-01-01

    The Japan Atomic Energy Research Institute (JAERI) has constructed the High Temperature Engineering Test Reactor (HTTR) with a thermal output of 30MW and a reactor out let coolant temper at ure of 950 .deg. C. There search and development (R and D) program on nuclear production of hydrogen was started on January in 1997 as a study consigned by Ministry of Education, Culture, Sports, Science and Technology. A hydrogen production system connected to the HTTR is being designed to be able to produce hydrogen of about 4000m 3 /h by steam reforming of natural gas, using a nuclear heat of 10MW supplied by the HTTR hydrogen production system. In order to confirm controllability, safety and performance of key components in the HTTR hydrogen production system, the facility for the out-of-pile test was constructed on the scale of approximately 1/30 of the HTTR hydrogen production system. In parallel to the out-of-pile test, the following tests as essential problem, a corrosion test of a reforming tube, a permeation test of hydrogen isotopes through heat exchanger and reforming tubes, and an integrity test of a high-temperature isolation valve are carried out to obtain detailed data for safety review and development of analytical codes. Other basis studies on the hydrogen production technology of thermochemical water splitting called an iodine sulfur (IS) process, has been carried out for more effective and various uses of nuclear heat. This paper describes the present status and a future plan on the R and D of the HTTR hydrogen production systems in JAERI

  13. Research on Livable Community Evaluation Based on GIS

    Science.gov (United States)

    Yin, Zhangcai; Wu, Yang; Jin, Zhanghaonan; Zhang, Xu

    2018-01-01

    Community is the basic unit of the city. Research on livable community could provide a bottom-up research path for the realization of livable city. Livability is the total factor affecting the quality of community life. In this paper, livable community evaluation indexes are evaluated based on GIS and fuzzy comprehensive evaluation method. Then the sum-index and sub-index of community livability are both calculated. And community livable evaluation index system is constructed based on the platform of GIS. This study provides theoretical support for the construction and management of livable communities, so as to guide the development and optimization of city.

  14. Research reactor production of radioisotopes for medical use

    International Nuclear Information System (INIS)

    Mani, R.S.

    1985-01-01

    More than 70% of all radioisotopes applied in medical diagnosis and research are currently produced in research reactors. Research reactors are also an important source of certain radioisotopes, such as 60 Co, 90 Y, 137 Cs and 198 Au, which are employed in teletherapy and brachytherapy. For regular medical applications, mainly 29 radionuclides produced in research reactors are used. These are now produced on an 'industrial scale' by many leading commercial manufacturers in industrialized countries as well as by national atomic energy establishments in developing countries. Five main neutron-induced reactions have been employed for the regular production of these radionuclides, namely: (n,γ), (n,p), (n,α), (n,γ) followed by decay, and (n, fission). In addition, the Szilard-Chalmers process has been used in low- and medium-flux research reactors to enrich the specific activity of a few radionuclides (mainly 51 Cr) produced by the (n,γ) reaction. Extensive work done over the last three decades has resulted in the development of reliable and economic large-scale production methods for most of these radioisotopes and in the establishment of rigorous specifications and purity criteria for their manifold applications in medicine. A useful spectrum of other radionuclides with suitable half-lives and low to medium toxicity can be produced in research reactors, with the requisite purity and specific activity and at a reasonable cost, to be used as tracers. Thanks to the systematic work done in recent years by many radiopharmaceutical scientists, the radionuclides of several elements, such as arsenic, selenium, rhenium, ruthenium, palladium, cadmium, tellurium, antimony, platinum, lead and the rare earth elements, which until recently were considered 'exotic' in the biomedical field, are now gaining attention. (author)

  15. EVALUATION OF MANUFACTURING AND AGRICULTURAL PRODUCTION BY THE END OF THE FINANCIAL PERIOD

    Directory of Open Access Journals (Sweden)

    Mincho Minev

    2016-06-01

    Full Text Available This article is dedicated on the matter of evaluation of manufacturing and agricultural production after the initial appraisal. Accounting standards and regulations, concerning the reappraisal of production, are discussed with emphasis on the key and most disputable requirements. The most commonly met difficulties in the process of reappraisal of production are pointed out. A research is done over the leading manufacturing and agricultural entities in Bulgaria. The point of the research is to study the degree on witch entities met the requirements and regulations of accounting standards when they reevaluate their production by the end of the year. The results of the research are shown and analyzed. Conclusions are made along with some recommendations in order to improve the quality of reappraisal of manufacturing and agricultural production.

  16. Functional Capacity Evaluation Research: Report from the Third International Functional Capacity Evaluation Research Meeting.

    Science.gov (United States)

    Edelaar, M J A; Gross, D P; James, C L; Reneman, M F

    2018-03-01

    Purpose Based on the success of the first two conferences the Third International FCE Research Conference was held in The Netherlands on September 29, 2016. The aim was to provide ongoing opportunity to share and recent FCE research and discuss its implications. Methods Invitations and call for abstracts were sent to previous attendees, researchers, practicing FCE clinicians and professionals. Fifteen abstracts were selected for presentation. The FCE research conference contained two keynote lectures. Results 54 participants from 12 countries attended the conference where 15 research projects and 2 keynote lectures were presented. The conference provided an opportunity to present and discuss recent FCE research, and provided a forum for discourse related to FCE use. Conference presentations covered aspects of practical issues in administration and interpretation; protocol reliability and validity; consideration of specific injury populations; and a focused discussion on proposed inclusion of work physiology principles in FCE testing with the Heart Rate Reserve Method. Details of this Third International FCE Research Conference are available from http://repro.rcnheliomare.nl/FCE.pdf . Conclusions Researchers, clinicians, and other professionals in the FCE area have a common desire to further improve the content and quality of FCE research and to collaborate to further develop research across systems, cultures and countries. A fourth, 2-day, International FCE research conference will be held in Valens, Switzerland in August or September 2018. A 'FCE research Society' will be developed.

  17. Bioenergy research programme. Yearbook 1996. Production of wood fuels; Bioenergian tutkimusohjelma. Vuosikirja 1996. Puupolttoaineiden tuotantotekniikka

    Energy Technology Data Exchange (ETDEWEB)

    Nikku, P [ed.

    1997-12-01

    The aim of the programme is to increase the use of economically profitable and environmentally sound bioenergy by improving the competitiveness of present peat and wood fuels. Research and development projects will also develop new economically competitive biofuels, new equipment and methods for production, handling and utilisation of biofuels. The total funding for 1996 was 27.3 million FIM and the number of projects 63. The number of projects concerning wood fuels production was 36. The main goals of the research are to develop new production methods for wood fuels in order to decrease the production costs to the level of imported fuels (100 km distance). The second goal is to decrease the small scale production costs by 20 % as compared with the 1992 technology level. Also, new harvesting technology and new work methods will be developed for forest owners and small-entrepreneurs in the course of the programme. Results of the projects carried out in 1996 in this programme are presented in this publication. The integrated harvesting methods, which supply both raw material to wood products industry and wood fuel for energy production, have been chosen the main research areas because they seem to be most promising. Most of the projects are focused in the wood fuel production from first thinnings and from final fellings. The projects broadly covered the research area focusing from material flows, productivity studies, basic wood properties to several case studies. The follow up project of Evaluation-drum chipper was completed with good fuel quality and productivity results. Also the large Forest Energy Project of Central Finland was completed. The project was a significant technology transfer and information dissemination project. (orig.)

  18. Worldwide research productivity of paracetamol (acetaminophen) poisoning: a bibliometric analysis (2003-2012).

    Science.gov (United States)

    Zyoud, S H; Al-Jabi, S W; Sweileh, W M

    2015-01-01

    There is a lack of data concerning the evaluation of scientific research productivity in paracetamol poisoning from the world. The purposes of this study were to analyse the worldwide research output related to paracetamol poisoning and to examine the authorship pattern and the citations retrieved from the Scopus database for over a decade. Data were searched for documents with specific words regarding paracetamol poisoning as 'keywords' in the title or/and abstract. Scientific output was evaluated based on a methodology developed and used in other bibliometric studies. Research productivity was adjusted to the national population and nominal gross domestic product (GDP) per capita. There were 1721 publications that met the criteria during study period from the world. All retrieved documents were published from 72 countries. The largest number of articles related to paracetamol poisoning was from the United States (US; 30.39%), followed by India (10.75%) and the United Kingdom (UK; 9.36%). The total number of citations at the time of data analysis was 21,109, with an average of 12.3 citations per each documents and median (interquartile range) of 4 (1-14). The h-index of the retrieved documents was 57. After adjusting for economy and population power, India (124.2), Nigeria (18.6) and the US (10.5) had the highest research productivity. Countries with large economies, such as the UK, Australia, Japan, China and France, tended to rank relatively low after adjustment for GDP over the entire study period. Our study demonstrates evidence that research productivity related to paracetamol poisoning has increased rapidly during the recent years. The US obviously dominated in research productivity. However, certain smaller country such as Nigeria has high scientific output relative to their population size and GDP. A highly noticeable increase in the contributions of Asia-Pacific and Middle East regions to scientific literature related to paracetamol poisoning was also

  19. Radiation research contracts: Distribution of fission products in the biosphere

    International Nuclear Information System (INIS)

    Schoenfeld, T.

    1959-01-01

    According to its Statute the IAEA has to fulfil a dual function - to help individual countries in solving their specific problems and to undertake tasks in the common interest of all its Member States. With this latter aim in mind the Agency has placed a number of research contracts with national research institutes. One of them deals with the distribution of fission products in the biosphere. The Agency has contributed to this work by putting at the institutes' disposal scientists from its own staff apparatus and financial aid. Protection against ionizing radiation given off in nuclear transformations is one of the foremost safety problems in all atomic energy operations. While every effort is being made to prevent reactors, processing plants and all other installations from releasing radioactive materials into the biosphere - air, water and earth - under any foreseeable conditions, small amounts of it are actually released into man's living space. Undoubtedly, this will continue to be so, at least for the time being. For example, low activity liquid wastes from some chemical processing plants are decontaminated in special processes, but traces of fission products remain in the liquids finally discharged on the ground or to nearby waterways. In some installations low and medium activity liquid wastes are even released on the ground or into swamps without prior decontamination. It is also to be expected that in accidents larger amounts of fission products may occasionally be released. (author)

  20. Gas research programme in Sweden 1994-1996. Evaluation report

    Energy Technology Data Exchange (ETDEWEB)

    Hustad, J E [Norwegian Univ. of Science and Technology, Trondheim (Norway); Jahkola, A [Helsinki Univ. of Technology (Finland); Norhammar, U [STOSEB (Sweden)

    1997-05-01

    This evaluation report is written by an international committee at the request of the Swedish National Board for Industrial and Technical Development (NUTEK). The committee was invited to look into the quality of a research programme funded jointly by Svenskt Gastekniskt Center SGC (Swedish Gas Technical Centre) and NUTEK. Criteria`s considered in the evaluation have in short been as follows: scientific value of the projects and of the results obtained; merits of the methods; capability of research groups and adequacy of resources; quality of research in the view of problem oriented applied research; necessity of future financial support. Although the projects are the main elements to be evaluated, the evaluators have paid attention to structural and other problems wherever such a need has been seen.

  1. Methods, measures and indicators for evaluating benefits of transportation research

    CSIR Research Space (South Africa)

    Du Plessis, Louw

    2016-04-01

    Full Text Available The purpose of this article is to provide updated information by identifying and discussing methods, measures and indicators for evaluating benefits appropriate for transportation-related research facilities/programmes. The information has been...

  2. Methodology for evaluation of railroad technology research projects

    Science.gov (United States)

    1981-04-01

    This Project memorandum presents a methodology for evaluating railroad research projects. The methodology includes consideration of industry and societal benefits, with special attention given to technical risks, implementation considerations, and po...

  3. Evaluation of the Treatment of Diabetic Retinopathy A Research Project

    Science.gov (United States)

    Kupfer, Carl

    1973-01-01

    Evaluated is the treatment of diabetic retinopathy (blindness due to ruptured vessels of the retina as a side effect of diabetes), and described is a research project comparing two types of photocoagulation treatment. (DB)

  4. Measures to Evaluate the Effects of DBS on Speech Production

    Science.gov (United States)

    Weismer, Gary; Yunusova, Yana; Bunton, Kate

    2011-01-01

    The purpose of this paper is to review and evaluate measures of speech production that could be used to document effects of Deep Brain Stimulation (DBS) on speech performance, especially in persons with Parkinson disease (PD). A small set of evaluative criteria for these measures is presented first, followed by consideration of several speech physiology and speech acoustic measures that have been studied frequently and reported on in the literature on normal speech production, and speech production affected by neuromotor disorders (dysarthria). Each measure is reviewed and evaluated against the evaluative criteria. Embedded within this review and evaluation is a presentation of new data relating speech motions to speech intelligibility measures in speakers with PD, amyotrophic lateral sclerosis (ALS), and control speakers (CS). These data are used to support the conclusion that at the present time the slope of second formant transitions (F2 slope), an acoustic measure, is well suited to make inferences to speech motion and to predict speech intelligibility. The use of other measures should not be ruled out, however, and we encourage further development of evaluative criteria for speech measures designed to probe the effects of DBS or any treatment with potential effects on speech production and communication skills. PMID:24932066

  5. Evaluating the Impact of a New Product on the Sales of other Products

    Directory of Open Access Journals (Sweden)

    Julian Andreev Vasilev

    2014-12-01

    Full Text Available The purpose of this article is to evaluate the impact of a new product on the sales of other products. Launching a new product may lead to increase or decrease of sales in the products of the same group. Customers may continue buying standard products or they may be oriented to new products. New products may cause internal competition. Statistical methods are applied. Time series analysis is used. Transactional database of a confectionary factory is the main source of data. The time series analysis is carried in two datasets – quantities of sales of three products on a daily basis and on a monthly basis. The main methods used are time series analysis and regression analysis. The three time series (corresponding to the three products are separated into two parts – before and after launching the new product. It is proved that the new product does not affect the sales of the two other products. The new product is well accepted and its sales increase together with the sales of the two other products.

  6. Techno-economic simulation data based deterministic and stochastic for product engineering research and development BATAN

    International Nuclear Information System (INIS)

    Petrus Zacharias; Abdul Jami

    2010-01-01

    Researches conducted by Batan's researchers have resulted in a number competences that can be used to produce goods and services, which will be applied to industrial sector. However, there are difficulties how to convey and utilize the R and D products into industrial sector. Evaluation results show that each research result should be completed with techno-economy analysis to obtain the feasibility of a product for industry. Further analysis on multy-product concept, in which one business can produce many main products, will be done. For this purpose, a software package simulating techno-economy I economic feasibility which uses deterministic and stochastic data (Monte Carlo method) was been carried out for multi-product including side product. The programming language used in Visual Basic Studio Net 2003 and SQL as data base processing software. This software applied sensitivity test to identify which investment criteria is sensitive for the prospective businesses. Performance test (trial test) has been conducted and the results are in line with the design requirement, such as investment feasibility and sensitivity displayed deterministically and stochastically. These result can be interpreted very well to support business decision. Validation has been performed using Microsoft Excel (for single product). The result of the trial test and validation show that this package is suitable for demands and is ready for use. (author)

  7. "Legal highs" on the net-Evaluation of UK-based Websites, products and product information.

    Science.gov (United States)

    Schmidt, Martin M; Sharma, Akhilesh; Schifano, Fabrizio; Feinmann, Charlotte

    2011-03-20

    A vast array of substances are marketed as "legal highs" in the UK. These products are mainly marketed online and are packaged and produced to mimic illicit drugs. Little is known about the full range of products available at present and no studies have evaluated the product information provided to consumers. AIMS & HYPOTHESIS: To describe the available legal high products marketed by UK-based Internet retailers and evaluate the product information provided to consumers. Websites were identified using the terms "buy legal highs+UK" and two search engines. The first 100 hits and a random sample of 5% of the remaining results were screened. Websites based in the UK were included and all products were entered on a database. Information on product name, list price, claimed effects, side effects, contraindications and interactions was extracted. A descriptive analysis was conducted using SPSS v14. 115 Websites met the inclusion criteria but due to duplicate listings this was reduced to 39 unique Websites. 1308 products were found and evaluated. The average product price was 9.69 British pounds. Products took the form of pills (46.6%), smoking material (29.7%) and single plant material/extract (18.1%). Most products claimed to be stimulants (41.7%), sedatives (32.3%), or hallucinogens (12.9%). 40.1% of products failed to list ingredients, 91.9% failed to list side effects, 81.9% failed to list contraindications and 86.3% failed to list drug interactions. Top 5 products (with active ingredients in brackets) by frequency were Salvia divinorum (Salivinorin A), Kratom (Mitragynine), Hawaiian Baby Woodrose Seeds (Lysergic Acid Amide), Fly Agaric (Ibotenic Acid, Muscimol) and Genie (JWH018, CP47497). Products marketed as "legal highs" are easily available from UK-based Internet retailers and are reasonably affordable. Safety information provided to consumers is poor. Uninformed users risk serious adverse effects. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  8. Faculty Rank System, Research Motivation, and Faculty Research Productivity: Measure Refinement and Theory Testing.

    Science.gov (United States)

    Tien, Flora F.; Blackburn, Robert T.

    1996-01-01

    A study explored the relationship between the traditional system of college faculty rank and faculty research productivity from the perspectives of behavioral reinforcement theory and selection function. Six hypotheses were generated and tested, using data from a 1989 national faculty survey. Results failed to support completely either the…

  9. Web indicators for research evaluation a practical guide

    CERN Document Server

    Thelwall, Michael

    2017-01-01

    In recent years there has been an increasing demand for research evaluation within universities and other research-based organisations. In parallel, there has been an increasing recognition that traditional citation-based indicators are not able to reflect the societal impacts of research and are slow to appear. This has led to the creation of new indicators for different types of research impact as well as timelier indicators, mainly derived from the Web. These indicators have been called altmetrics, webometrics or just web metrics. This book describes and evaluates a range of web indicators for aspects of societal or scholarly impact, discusses the theory and practice of using and evaluating web indicators for research assessment and outlines practical strategies for obtaining many web indicators. In addition to describing impact indicators for traditional scholarly outputs, such as journal articles and monographs, it also covers indicators for videos, datasets, software and other non-standard scholarly out...

  10. Evaluation of tile layer productivity in construction project

    Science.gov (United States)

    Aziz, Hamidi Abdul; Hassan, Siti Hafizan; Rosly, Noorsyalili; Ul-Saufie, Ahmad Zia

    2017-10-01

    Construction is a key sector of the national economy for countries all over the world. Until today, construction industries are still facing lots of problems concerning the low productivity, poor safety and insufficient quality. Labour productivity is one of the factors that will give impact to the quality of projects. This study is focusing on evaluating the tile layer productivity in the area of Seberang Perai, Penang. The objective of this study is to determine the relationship of age and experience of tile layers with their productivity and to evaluate the effect of nationality to tile layers productivity. Interview and site observation of tile layers has been conducted to obtain the data of age, experience and nationality of tile layers. Site observation is made to obtain the number of tiles installed for every tile layer for the duration of 1 hour, and the data were analysed by using Statistical Package for Social Science (IBM SPSS Statistic 23) software. As a result, there is a moderate linear relationship between age and experience of tile layers with their productivity. The age of 30 and the experience of 4 years give the highest productivity. It also can be concluded that the tile layers from Indonesia tend to have higher productivity compared to tile layers from Myanmar.

  11. Improving the production of applied health research findings: insights from a qualitative study of operational research.

    Science.gov (United States)

    Crowe, Sonya; Turner, Simon; Utley, Martin; Fulop, Naomi J

    2017-09-08

    Knowledge produced through applied health research is often of a form not readily accessible to or actionable by policymakers and practitioners, which hinders its implementation. Our aim was to identify research activities that can support the production of knowledge tailored to inform policy and practice. To do this, we studied an operational research approach to improving the production of applied health research findings. A 2-year qualitative study was conducted of the operational research contribution to a multidisciplinary applied health research project that was successful in rapidly informing national policy. Semi-structured interviews (n = 20) were conducted with all members of the project's research team and advisory group (patient and health professional representatives and academics). These were augmented by participant (> 150 h) and non-participant (> 15 h) observations focusing on the process and experience of attempting to support knowledge production. Data were analysed thematically using QSR NVivo software. Operational research performed a knowledge mediation role shaped by a problem-focused approach and an intent to perform those tasks necessary to producing readily implementable knowledge but outwith the remit of other disciplinary strands of the project. Three characteristics of the role were found to support this: engaging and incorporating different perspectives to improve services by capturing a range of health professional and patient views alongside quantitative and qualitative research evidence; rendering data meaningful by creating and presenting evidence in forms that are accessible to and engage different audiences, enabling them to make sense of it for practical use; and maintaining perceived objectivity and rigour by establishing credibility, perceived neutrality and confidence in the robustness of the research in order to unite diverse professionals in thinking creatively about system-wide service improvement. Our study

  12. Profile and scientific production of Brazilian National Council of Technological and Scientific Development researchers in Pediatrics

    Directory of Open Access Journals (Sweden)

    Maria Christina L. Oliveira

    2013-09-01

    Full Text Available OBJECTIVE: To evaluate the profile and the scientific production of researchers in Pediatrics with scholarship from the National Counsel of Technological and Scientific Development. METHODS: The Lattes curricula of 34 researchers in Pediatrics with active scholarships, from 2006 to 2008 were included in the analysis. The variables of interest were: gender, affiliation, time since PHD, tutoring of undergraduate students, mentorship of masters and doctors, scientific production and the papers' impact. RESULTS: In a total of 411 researchers in Medicine, 34 (8% belonged to Pediatrics. Males (77% and scholars in the category 2 of productivity (62% prevailed. Three states of Brazil were responsible for approximately 90% of the researchers: São Paulo (53%, Minas Gerais (21%, and Rio Grande do Sul (15%. During their academic career, the Pediatrics researchers have published 3,122 articles with a median of 89 articles per researcher (interquartile range - IQ=51-119. Of the total, 40 and 59% articles were indexed in the Web of Science and Scopus databases, respectively. The Pediatrics researchers have published papers in 599 journals with a median impact factor of 2.35 (IQ=1.37-3.73 for the 323 indexed journals. CONCLUSIONS: The Pediatrics researchers have a relevant scientific output from the quantity point of the view, but there is a need to improve quality.

  13. Profile and scientific production of Brazilian National Council of Technological and Scientific Development researchers in Pediatrics.

    Science.gov (United States)

    Oliveira, Maria Christina L; Martelli, Daniella Reis B; Pinheiro, Sergio Veloso; Miranda, Debora Marques; Quirino, Isabel Gomes; Leite, Barbara Gusmão L; Colosimo, Enrico Antonio; e Silva, Ana Cristina S; Martelli-Júnior, Hercílio; Oliveira, Eduardo Araujo

    2013-09-01

    To evaluate the profile and the scientific production of researchers in Pediatrics with scholarship from the National Counsel of Technological and Scientific Development. The Lattes curricula of 34 researchers in Pediatrics with active scholarships, from 2006 to 2008 were included in the analysis. The variables of interest were: gender, affiliation, time since PHD, tutoring of undergraduate students, mentorship of masters and doctors, scientific production and the papers' impact. In a total of 411 researchers in Medicine, 34 (8%) belonged to Pediatrics. Males (77%) and scholars in the category 2 of productivity (62%) prevailed. Three states of Brazil were responsible for approximately 90% of the researchers: São Paulo (53%), Minas Gerais (21%), and Rio Grande do Sul (15%). During their academic career, the Pediatrics researchers have published 3,122 articles with a median of 89 articles per researcher (interquartile range - IQ=51-119). Of the total, 40 and 59% articles were indexed in the Web of Science and Scopus databases, respectively. The Pediatrics researchers have published papers in 599 journals with a median impact factor of 2.35 (IQ=1.37-3.73) for the 323 indexed journals. The Pediatrics researchers have a relevant scientific output from the quantity point of the view, but there is a need to improve quality.

  14. Economic evaluation of private power production under uncertainties

    Energy Technology Data Exchange (ETDEWEB)

    Weiguo Xing; Wu, F.F. [University of Hong Kong (China). Centre for Electrical Energy Systems

    2003-02-01

    Private power production is becoming an increasingly important source of electricity generation. In developing countries, build-operate-transfer (BOT) arrangement has emerged as a dominant form of private investment. Pricing private power production at its avoided cost is the breakeven point for the utility in economic evaluation, and uncertainties must be taken into account. In this paper, an approach of calculating the breakeven cost to the utility of a BOT power plant whose contract lasts for 10-25 years is proposed. The proposed approach requires the computation of production costs from long-term generation expansion planning (GEP) under future uncertainties. To facilitate the inclusion of constraints introduced by BOT plants in GEP and uncertainties, a genetic algorithm method is utilized in GEP. The breakeven cost is a useful measure in the economic evaluation of BOT power plants. An example is presented to illustrate the economic evaluation of BOT plants using the concept of breakeven cost.(author)

  15. Mental representation changes the evaluation of green product benefits

    Science.gov (United States)

    Goldsmith, Kelly; Newman, George E.; Dhar, Ravi

    2016-09-01

    Although campaigns designed to promote pro-environmental behaviours increasingly highlight self-interest, recent research suggests that such appeals may not always be effective. For example, individuals are more likely to check their tyre pressure when prompted with self-transcendent (that is, benefits to the environment) versus economic motives; and, self-transcendent appeals are more likely to promote recycling behaviours than self-interested appeals. The present experiments identify an important psychological factor that helps to explain when highlighting economic benefits will be more or less effective in encouraging pro-environmental behaviours. Specifically, we demonstrate that highlighting economic benefits (for example, the money a consumer can save) reduces consumer interest in sustainable products when individuals are in more abstract mindsets compared with when the evaluation is more immediate (that is, their mindset is more concrete). Further, we provide evidence that this shift in interest is driven by the lack of `fit' between abstract thinking and economic motivations, in the context of pro-environmental behaviour.

  16. Toward an agenda for evaluation of qualitative research.

    Science.gov (United States)

    Stige, Brynjulf; Malterud, Kirsti; Midtgarden, Torjus

    2009-10-01

    Evaluation is essential for research quality and development, but the diversity of traditions that characterize qualitative research suggests that general checklists or shared criteria for evaluation are problematic. We propose an approach to research evaluation that encourages reflexive dialogue through use of an evaluation agenda. In proposing an evaluation agenda we shift attention from rule-based judgment to reflexive dialogue. Unlike criteria, an agenda may embrace pluralism, and does not request consensus on ontological, epistemological, and methodological issues, only consensus on what themes warrant discussion. We suggest an evaluation agenda-EPICURE-with two dimensions communicated through use of two acronyms.The first, EPIC, refers to the challenge of producing rich and substantive accounts based on engagement, processing, interpretation, and (self-)critique. The second-CURE-refers to the challenge of dealing with preconditions and consequences of research, with a focus on (social) critique, usefulness, relevance, and ethics. The seven items of the composite agenda EPICURE are presented and exemplified. Features and implications of the agenda approach to research evaluation are then discussed.

  17. From university research to commercial product (Conference Presentation)

    Science.gov (United States)

    Mathuis, Philip

    2016-03-01

    Ovizio Imaging Systems, a quantitative microscopic imaging spin-off of the Université Libre de Bruxelles, Belgium, was founded in the beginning of 2010 by Philip Mathuis, Serge Jooris, Prof. Frank Dubois and Dr. Catherine Yourassowky. The company has launched a range of specialized microscopy instruments for quantitative imaging mainly focused on the bioprocessing and diagnostics fields within the life sciences market. During my talk I will present the story of how an idea, emerged from the research labs of the University made it to a manufactured and sold product. The talk will look at many aspects of entrepreneurship and setting up a company, finding the funding for the project, attracting people, industrialization and product design and commercialization. It will also be focused on choices one has to make during the start-up phase and methodologies that can be applied in many different settings.

  18. Rainfall Product Evaluation for the TRMM Ground Validation Program

    Science.gov (United States)

    Amitai, E.; Wolff, D. B.; Robinson, M.; Silberstein, D. S.; Marks, D. A.; Kulie, M. S.; Fisher, B.; Einaudi, Franco (Technical Monitor)

    2000-01-01

    Evaluation of the Tropical Rainfall Measuring Mission (TRMM) satellite observations is conducted through a comprehensive Ground Validation (GV) Program. Standardized instantaneous and monthly rainfall products are routinely generated using quality-controlled ground based radar data from four primary GV sites. As part of the TRMM GV program, effort is being made to evaluate these GV products and to determine the uncertainties of the rainfall estimates. The evaluation effort is based on comparison to rain gauge data. The variance between the gauge measurement and the true averaged rain amount within the radar pixel is a limiting factor in the evaluation process. While monthly estimates are relatively simple to evaluate, the evaluation of the instantaneous products are much more of a challenge. Scattegrams of point comparisons between radar and rain gauges are extremely noisy for several reasons (e.g. sample volume discrepancies, timing and navigation mismatches, variability of Z(sub e)-R relationships), and therefore useless for evaluating the estimates. Several alternative methods, such as the analysis of the distribution of rain volume by rain rate as derived from gauge intensities and from reflectivities above the gauge network will be presented. Alternative procedures to increase the accuracy of the estimates and to reduce their uncertainties also will be discussed.

  19. Report on evaluation of research and development of production of olefins from heavy oil as the stock material; 'Jushitsuyu wo genryo to suru olefin no seizoho' no kenkyu kaihatsu ni kansuru hyoka hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1982-08-01

    This project is aimed at stable supply of the stocks for the petrochemical industry to cope with the keenly felt depletion of oil resources in the long run and price hikes, and promotion of effective utilization of high-sulfur heavy oil fractions difficult to desulfurize, thereby promoting prevention of pollution. The techniques have been developed to economically produce high-value products, e.g., olefins and aromatic hydrocarbons, by thermally cracking abundant stocks, e.g., vacuum residue. A 120 t/d fluidized bed pilot plant with coke as the heat medium was constructed to develop various techniques, e.g., those for controlling coking, decoking, quenching cracking products, and controlling coke particles as the heat medium, to realize stable, continuous operation for extended periods of at least 1,000 hours. The techniques have been also developed for effective utilization of heavy oils as by-products containing sulfur at high concentrations. Economic viability of the process is considered to be on a level with that associated with naphtha cracking at present, when an intermediate base vacuum residue is used as the stock material. It will be sufficiently competitive with naphtha cracking with all types of heavy oils as the stock materials, including intermediate base vacuum residue, in an intermediate term. (NEDO)

  20. Evaluation of Odor-Reducing Commercial Products for Animal Waste

    OpenAIRE

    Shukla, Shuchi S.

    1997-01-01

    Six odor-reducing commercial products were tested for their efficacy in reducing odors from dairy and swine wastes. A sensory panel method was utilized for odor evaluations, in which the panel played an important part. Comparisons between products were made for agitated and unagitated conditions and effect of storage time (three weeks in which experiments were performed). Cotton pieces tied to the mouth of the sample jars were useful in absorbing the odors. Odor-treated jars were observed and...

  1. Research productivity and gender disparities: a look at academic plastic surgery.

    Science.gov (United States)

    Paik, Angie M; Mady, Leila J; Villanueva, Nathaniel L; Goljo, Erden; Svider, Peter F; Ciminello, Frank; Eloy, Jean Anderson

    2014-01-01

    The h-index has utility in examining the contributions of faculty members by quantifying both the amount and the quality of research output and as such is a metric in approximating academic productivity. The objectives of this study were (1) to evaluate the relationship between h-index and academic rank in plastic surgery and (2) to describe the current gender representation in academic plastic surgery to assess whether there are any gender disparities in academic productivity. The h-index was used to evaluate the research contributions of plastic surgeons from academic departments in the United States. There were 426 (84%) men and 79 (16%) women in our sample. Those in higher academic ranks had higher h-index scores (p productivity between men and women in assistant and associate professor positions (6.4 vs 5.1, respectively; p = 0.04). The h-index is able to objectively and reliably quantify academic productivity in plastic surgery. We found that h-indices increased with higher academic rank, and men had overall higher scores than their female colleagues. Adoption of this metric as an adjunct to other objective and subjective measures by promotions committees may provide a more reliable measure of research relevance and academic productivity in academic plastic surgery. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  2. Research Issues in Evaluating Learning Pattern Development in Higher Education

    Science.gov (United States)

    Richardson, John T. E.

    2013-01-01

    This article concludes the special issue of "Studies in Educational Evaluation" concerned with "Evaluating learning pattern development in higher education" by discussing research issues that have emerged from the previous contributions. The article considers in turn: stability versus variability in learning patterns; old versus new analytic…

  3. Research approaches to the analysis of «man-production» relations

    Directory of Open Access Journals (Sweden)

    Liliya A. Otstavnova

    2014-01-01

    Full Text Available Objective to identify and describe research approaches used in the analysis of the relationship between humans and production. Methods in this work we have applied the methods of grouping describing and historical and logical method. Results basing on the characteristics of the main approaches used in the analysis of laquomanproductionraquo relations and taking into account the focus of the research it was established that the application of institutional systematic quantitative regulatory legislative structural functional and integrated approaches allows to pay equal attention to both production and man. Organic humanistic reproductive and situational approaches focus primarily on the man while economic procedural structural and marketing approaches focus on production. The distribution of each approach to a particular group is justified. Scientific novelty the author presents a classification of research approaches to the analysis of the laquomanproductionraquo relations system consisting of two subsystems. Each approach is given a detailed characteristic of both man and production that allows to evaluate the possibility of using these approaches and increasing the efficiency of this system research. Research approaches to the analysis of laquomanproductionraquo relations Practical value is manifested in the ability to optimize the use of research approaches to the analysis of the laquomanproductionraquo relations system to identify problems and ways to address them.

  4. Enhancing Environmental Communication and Products Through Qualitative Research

    Science.gov (United States)

    DeLorme, D.; Hagen, S. C.

    2014-12-01

    This presentation discusses two ongoing interdisciplinary case studies that are using qualitative research to design and enhance environmental communication and science products for outreach and decision making purposes. Both cases demonstrate the viability and practical value of qualitative social science methodology, specifically focus group interviews, to better understand the viewpoints of target audiences, improve deliverables, and support project goals. The first case is a NOAA-funded project to conduct process-based modeling to project impact from climate change in general and sea level rise in particular to the natural and built environment. The project spans the Mississippi, Alabama, and Florida Panhandle coasts with concentration on the three National Estuarine Research Reserves. As part of the broader project, four annual focus groups were conducted with a purposive sample of coastal resource managers to capture their perspectives and suggestions to better meet their informational and operational needs. The second case is a Florida Sea Grant-funded project that is developing, implementing, and testing a cohesive outreach campaign to promote voluntary careful and responsible recreational boating to help protect sensitive marine life and habitats (especially seagrasses and oyster reefs) in the Mosquito Lagoon. Six focus groups were conducted with a purposive sample of the target audience of boaters to gain insights, feedback, and ideas on the direction of the campaign and design of the messages and products. The campaign materials created include a branded website, Facebook page, mobile app, information packets, brochures, pledge forms, and promotional items. A comparison of these two case studies will be provided and will explain how the qualitative findings were/are being implemented to tailor and refine the respective communication strategies and techniques including the emerging outreach products. The resulting outcomes are messages and tools that are

  5. Research and development in production of special coke types

    Energy Technology Data Exchange (ETDEWEB)

    Nefedov, P.Ya.; Unterberger, O.G.; Strakhov, V.M. (Vostochnyi Nauchno-Issledovatel' skii Uglekhimicheskii Institut (USSR))

    1991-03-01

    Discusses methods for increasing quality of foundry coke and quality of special coke types used in non-ferrous metallurgy. Types of coal from various coal basins for production of foundry coke, types of petroleum and coal-derived additives improving caking and coking properties of the standard coal mixtures and effects of partial coal charge briquetting are discussed. Three types of partial coal charge briquetting are comparatively evaluated: continuous coking of the briquetted mixtures of weakly caking lean coal types, anthracites and coking coal mixed with thermosoftening binders; continuous coking of identical mixtures briquetted with non-thermosoftening binders; coking coke dust mixed with thermoreactive binders and briquetted at 200-300 C. Coking conditions, the final coking temperature, binder consumption rates, dimensions of coal briquets, ash content, sulfur content and coke mechanical properties (compression strength and wear) are comparatively evaluated.

  6. Global unbalance in seaweed production, research effort and biotechnology markets.

    Science.gov (United States)

    Mazarrasa, Inés; Olsen, Ylva S; Mayol, Eva; Marbà, Núria; Duarte, Carlos M

    2014-01-01

    Exploitation of the world's oceans is rapidly growing as evidenced by a booming patent market of marine products including seaweed, a resource that is easily accessible without sophisticated bioprospecting technology and that has a high level of domestication globally. The investment in research effort on seaweed aquaculture has recently been identified to be the main force for the development of a biotechnology market of seaweed-derived products and is a more important driver than the capacity of seaweed production. Here, we examined seaweed patent registrations between 1980 and 2009 to assess the growth rate of seaweed biotechnology, its geographic distribution and the types of applications patented. We compare this growth with scientific investment in seaweed aquaculture and with the market of seaweed production. We found that both the seaweed patenting market and the rate of scientific publications are rapidly growing (11% and 16.8% per year respectively) since 1990. The patent market is highly geographically skewed (95% of all registrations belonging to ten countries and the top two holding 65% of the total) compared to the distribution of scientific output among countries (60% of all scientific publications belonging to ten countries and the top two countries holding a 21%), but more homogeneously distributed than the production market (with a 99.8% belonging to the top ten countries, and a 71% to the top two). Food industry was the dominant application for both the patent registrations (37.7%) and the scientific publications (21%) followed in both cases by agriculture and aquaculture applications. This result is consistent with the seaweed taxa most represented. Kelp, which was the target taxa for 47% of the patent registrations, is a traditional ingredient in Asian food and Gracilaria and Ulva, which were the focus of 15% and 13% of the scientific publications respectively, that are also used in more sophisticated applications such as cosmetics, chemical

  7. Disability Evaluation System Analysis and Research Annual Report 2017

    Science.gov (United States)

    2017-11-20

    females, other race, enlisted and active duty service members for all services and time periods. • Rates increase as age increases in the Army. For the...Annual Report 2017 Disability Evaluation Systems Analysis and Research Prepared by Accession Medical Standards Analysis and Research Activity ...50 History of hospitalization among active duty service

  8. Requirements for an evaluation infrastructure for reliable pervasive healthcare research

    DEFF Research Database (Denmark)

    Wagner, Stefan Rahr; Toftegaard, Thomas Skjødeberg; Bertelsen, Olav W.

    2012-01-01

    The need for a non-intrusive evaluation infrastructure platform to support research on reliable pervasive healthcare in the unsupervised setting is analyzed and challenges and possibilities are identified. A list of requirements is presented and a solution is suggested that would allow researchers...

  9. Relationships of Research and Teaching: Implications for Faculty Evaluation

    Science.gov (United States)

    Jauch, Lawrence R.

    1976-01-01

    Research involving 23 hard science disciplines at a midwestern university indicates that research and teaching are complementary but that time allocation tradeoffs are necessary between the two functions. Administratively, evaluations tend to influence the direction faculty choose to follow. (Author/LBH)

  10. A Preliminary Rubric Design to Evaluate Mixed Methods Research

    Science.gov (United States)

    Burrows, Timothy J.

    2013-01-01

    With the increase in frequency of the use of mixed methods, both in research publications and in externally funded grants there are increasing calls for a set of standards to assess the quality of mixed methods research. The purpose of this mixed methods study was to conduct a multi-phase analysis to create a preliminary rubric to evaluate mixed…

  11. Safety evaluation of the Dalat research reactor operation

    International Nuclear Information System (INIS)

    Long, V.H.; Lam, P.V.; An, T.K.

    1989-01-01

    After an introduction presenting the essential characteristics of the Dalat Nuclear Research Reactor, the document presents i) The safety assurance condition of the reactor, ii) Its safety behaviour after 5 years of operation, iii) Safety research being realized on the reactor. Following is questionnaire of safety evaluation and a list of attachments, which concern the reactor

  12. Evaluating Pollination Deficits in Pumpkin Production in New York

    OpenAIRE

    Petersen, J. D.; Huseth, A. S.; Nault, B. A.

    2017-01-01

    Potential decreases in crop yield from reductions in bee-mediated pollination services threaten food production demands of a growing population. Many fruit and vegetable growers supplement their fields with bee colonies during crop bloom. The extent to which crop production requires supplementary pollination services beyond those provided by wild bees is not well documented. Pumpkin, Cucurbita pepo L., requires bee-mediated pollination for fruit development. Previous research identified the c...

  13. The life-cycle research productivity of mathematicians and scientists.

    Science.gov (United States)

    Diamond, A M

    1986-07-01

    Declining research productivity with age is implied by economic models of life-cycle human capital investment but is denied by some recent empirical studies. The purpose of the present study is to provide new evidence on whether a scientist's output generally declines with advancing age. A longitudinal data set has been compiled for scientists and mathematicians at six major departments, including data on age, salaries, annual citations (stock of human capital), citations to current output (flow of human capital), and quantity of current output measured both in number of articles and in number of pages. Analysis of the data indicates that salaries peak from the early to mid-60s, whereas annual citations appear to peak from age 39 to 89 for different departments with a mean age of 59 for the 6 departments. The quantity and quality of current research output appear to decline continuously with age.

  14. EVALUATION OF NUTRITIVE VALUE AND IN VITRO METHANE PRODUCTION OF FEEDSTUFFS FROM AGRICULTURAL AND FOOD INDUSTRY BY-PRODUCTS

    Directory of Open Access Journals (Sweden)

    B. Santoso

    2014-10-01

    Full Text Available The aim of this research was to evaluate the nutrient degradability, in vitro methane (CH4 production ofseveral agricultural and food industry by-products in relation to their chemical composition. Twenty-onesamples of 7 feedstuffs from agricultural and food industry by-products consisted of corn straw, potatostraw, rice straw, cocoa pod, sago waste, rice bran, soybean curd residue were evaluated by an in vitro gasproduction and nutrient degradability. The feedstuffs varied greatly in their crude protein (CP, neutraldetergent fiber (NDF and non-fiber carbohydrate (NFC contents. Crude protein ranged from 1.5 to 21.8%,NDF from 31.6 to 71.1% and NFC from 1.5 to 50.8%. Among the seven feedstuffs, soybean curd residuehad the highest CP content, on the other hand it had the lowest NDF content. Dry matter (DM and organicmatter (OM degradability were highest (P<0.01 in soybean curd residue among the feedstuffs. The CH4production was significantly higher (P<0.01 in rice straw, cocoa pod and corn straw as compared to sagowaste. There was a strong positive correlation (r = 0.60; P<0.01 between NDF concentration and CH4production. However, the total gas productions was negatively correlated (r = -0.75; P<0.01 with NDFcontent. The CH4 production of feedstuff is influenced by NDF content.

  15. SCIENTOMETRY AND EVALUATION OF THE RESULTS OF ECONOMIC SCIENTIFIC RESEARCH

    Directory of Open Access Journals (Sweden)

    Ana-Lucia RISTEA

    2017-04-01

    Full Text Available Starting from the necessity of a continuous and demanding evaluation, capable of linking the results obtained with the human, material and financial resources, allocated and periodically setting the position of the national research relative to the world level, the evaluation of the relevance of the publications must be carried out from the positions and requirements of new disciplines: Scientometry. Scientometry is intended to help substantiate the evaluation of research activity and decision-making on its development, the science policy as a whole.

  16. The Policy Use of Environmental Indicators - Learning from Evaluation Research

    DEFF Research Database (Denmark)

    Gudmundsson, H.

    2003-01-01

    indicators and monitoring systems are increasingly used, but what does the use of indicators mean for policymaking? The article exploits indicator theory and the evaluation research literature to develop an analytical framework so as to study the policy uses of indicators. The paper then provides...... system and partly to the lack of accountability mechanisms. The article concludes that the analytical framework and the concepts derived from evaluation research are useful starting points, but that further research should extend the analysis to other policy contexts (national or local) and broaden...

  17. On multiplying methods in the field of research evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Derrick, G.; Molas-Gallart, J.; De Rijcke, S.; Meijer, I.; Van der Weijden, I.; Wouters, P.

    2016-07-01

    This special session forms part of a larger program aimed at the multiplication and integration of methodological approaches in the research evaluation and innovation policy field. The session builds on previous initiatives by Gemma Derrick and colleagues at CWTS, INGENIO, the Rathenau Instituut and SPRU, exploring the advantages of qualitative methodological tools at the STI/ENID conference in Lugano, and an international workshop in London in October 2015. The program is highly topical: the research evaluation field is currently reconsidering its methodological foundations in light of new research questions arising from policy initiatives regarding a) the move toward open science; b) a reconceptualization of research excellence to include societal relevance; c) diversification of academic careers, and d) the search for indicators showcasing responsible research behavior and innovation. This new special session at STI2016 will advance and broaden the scope of previous initiatives by building bridges between cutting edge research involving quantitative, qualitative, and mixed methodological research designs. Bringing together leading experts and promising researchers with distinctive methodological skill-sets, the session will demonstrate the advantages of cross-fertilization between ‘core’ and ‘peripheral’ methodological approaches for the research evaluation and science indicators field. (Author)

  18. Mid-term evaluation of ten National Research schools

    DEFF Research Database (Denmark)

    Gustafsson, Göran; Dahl, Hanne Marlene; Gustafsson, Christina

    the scheme was launched, the Research Council has issued three calls for proposals and allocated grants to a total of 22 national research schools. Five were started up in 2009, ten in 2013 and seven in 2015. A Nordic scientific programme committee was appointed in 2013, with responsibility for assessing...... grant applications, monitoring the progress of the FORSKERSKOLER scheme and serving as the evaluation panel for the mid-term evaluation in 2013 and in 2016/2017. The task of the evaluation panel has been to: 1) evaluate the quality of and progress achieved by the ten research schools which were awarded...... funding in 2012 and launched in 2013; and 2) to provide recommendations as to whether funding should be continued to cover the full eight-year period or terminated after five years. Continued funding is recommended for all ten schools to cover the full eight-year period, according to the proposed budget...

  19. Suitability Evaluation for Products Generation from Multisource Remote Sensing Data

    Directory of Open Access Journals (Sweden)

    Jining Yan

    2016-12-01

    Full Text Available With the arrival of the big data era in Earth observation, the remote sensing communities have accumulated a large amount of invaluable and irreplaceable data for global monitoring. These massive remote sensing data have enabled large-area and long-term series Earth observation, and have, in particular, made standard, automated product generation more popular. However, there is more than one type of data selection for producing a certain remote sensing product; no single remote sensor can cover such a large area at one time. Therefore, we should automatically select the best data source from redundant multisource remote sensing data, or select substitute data if data is lacking, during the generation of remote sensing products. However, the current data selection strategy mainly adopts the empirical model, and has a lack of theoretical support and quantitative analysis. Hence, comprehensively considering the spectral characteristics of ground objects and spectra differences of each remote sensor, by means of spectrum simulation and correlation analysis, we propose a suitability evaluation model for product generation. The model will enable us to obtain the Production Suitability Index (PSI of each remote sensing data. In order to validate the proposed model, two typical value-added information products, NDVI and NDWI, and two similar or complementary remote sensors, Landsat-OLI and HJ1A-CCD1, were chosen, and the verification experiments were performed. Through qualitative and quantitative analysis, the experimental results were consistent with our model calculation results, and strongly proved the validity of the suitability evaluation model. The proposed production suitability evaluation model could assist with standard, automated, serialized product generation. It will play an important role in one-station, value-added information services during the big data era of Earth observation.

  20. Commercial Aspect of Research Reactor Fuel Element Production

    International Nuclear Information System (INIS)

    Susanto, B.G; Suripto, A

    1998-01-01

    Several aspects affecting the commercialization of the Research Reactor Fuel Element Production Installation (RR FEPI) under a BUMN (state-owned company)have been studied. The break event point (BEP) value based on total production cost used is greatly depending upon the unit selling price of the fuel element. At a selling price of USD 43,500/fuel element, the results of analysis shows that the BEP will be reached at 51% of minimum available capacity. At a selling price of US$ 43.500/fuel element the total income (after tax) for 7 years ahead is US $ 4.620.191,- The net present value in this study has a positive value is equal to US $ 2.827.527,- the internal rate of return will be 18% which is higher than normal the bank interest rare (in US dollar) at this time. It is concluded therefore that the nuclear research reactor fuel element produced by state-owned company BUMN has a good prospect to be sold commercially

  1. Product-related research: how research can contribute to successful life-cycle management.

    Science.gov (United States)

    Sandner, Peter; Ziegelbauer, Karl

    2008-05-01

    Declining productivity with decreasing new molecular entity output combined with increased R&D spending is one of the key challenges for the entire pharmaceutical industry. In order to offset decreasing new molecular entity output, life-cycle management activities for established drugs become more and more important to maintain or even expand clinical indication and market opportunities. Life-cycle management covers a whole range of activities from strategic pricing to a next generation product launch. In this communication, we review how research organizations can contribute to successful life-cycle management strategies using phosphodiesterase 5 inhibitors as an example.

  2. Pay attention to the enterprise competitive intelligence analysis research promotion enterprise scientific research production and product development

    International Nuclear Information System (INIS)

    Yang Yan

    2014-01-01

    This article covers the competitive intelligence content and five characteristics, and on the American Competitive intelligence Outstanding Company's place situation, shows fully the competitive intelligence constructs the core competitive power regarding the enterprise to have the significant function, Its contribution has already hold the pivotal status in the world famous enterprise. It is an important cornerstone for enterprises which construct the core competitive power. Along with the enterprise competition environment rapid change, the competitive intelligence importance suddenly to reveal day by day. Just like the world richest family Microsoft Corporation president Bill. Gates asserted that, How to collect, How to analysis, how to manage and how to use information, lt will decide the enterprise victory and loss. And unified the enterprise scientific research production the special details, take 'To develop the SF_6 New Product' to introduce as the example how did the enterprise competition intelligence, as well as how did the information development and using in it. (author)

  3. Secondary analysis of a marketing research database reveals patterns in dairy product purchases over time.

    Science.gov (United States)

    Van Wave, Timothy W; Decker, Michael

    2003-04-01

    Development of a method using marketing research data to assess food purchase behavior and consequent nutrient availability for purposes of nutrition surveillance, evaluation of intervention effects, and epidemiologic studies of diet-health relationships. Data collected on household food purchases accrued over a 13-week period were selected by using Universal Product Code numbers and household characteristics from a marketing research database. Universal Product Code numbers for 39,408 dairy product purchases were linked to a standard reference for food composition to estimate the nutrient content of foods purchased over time. Two thousand one hundred sixty-one households located in Victoria, Texas, and surrounding communities who were active members of a frequent shopper program. Demographic characteristics of sample households and the nutrient content of their dairy product purchases were analyzed using frequency distribution, cross tabulation, analysis of variance, and t test procedures. A method for using marketing research data was successfully used to estimate household purchases of specific foods and their nutrient content from a marketing database containing hundreds of thousands of records. Distribution of dairy product purchases and their concomitant nutrients between Hispanic and non-Hispanic households were significant (P<.01, P<.001, respectively) and sustained over time. Purchase records from large, nationally representative panels of shoppers, such as those maintained by major market research companies, might be used to accomplish detailed longitudinal epidemiologic studies or surveillance of national food- and nutrient-purchasing patterns within and between countries and segments of their respective populations.

  4. Sea Surface Temperature Products and Research Associated with GHRSST

    Science.gov (United States)

    Kaiser-Weiss, Andrea K.; Minnett, Peter J.; Kaplan, Alexey; Wick, Gary A.; Castro, Sandra; Llewellyn-Jones, David; Merchant, Chris; LeBorgne, Pierre; Beggs, Helen; Donlon, Craig J.

    2012-03-01

    GHRSST serves its user community through the specification of operational Sea Surface Temperature (SST) products (Level 2, Level 3 and Level 4) based on international consensus. Providers of SST data from individual satellites create and deliver GHRSST-compliant near-real time products to a global GHRSST data assembly centre and a long-term stewardship facility. The GHRSST-compliant data include error estimates and supporting data for interpretation. Groups organised within GHRSST perform research on issues relevant to applying SST for air-sea exchange, for instance the Diurnal Variability Working Group (DVWG) analyses the evolution of the skin temperature. Other GHRSST groups concentrate on improving the SST estimate (Estimation and Retrievals Working Group EARWiG) and on improving the error characterization, (Satellite SST Validation Group, ST-VAL) and on improving the methods for SST analysis (Inter-Comparison Technical Advisory Group, IC-TAG). In this presentation we cover the data products and the scientific activities associated with GHRSST which might be relevant for investigating ocean-atmosphere interactions.

  5. The performance effects of combining rationality and intuition in making early new product idea evaluation decisions

    NARCIS (Netherlands)

    Eling, K.; Langerak, F.; Griffin, A.

    New product idea evaluation decisions made by individual development team members during their idea generation activities allow for and may also benefit from the use of both rational and intuitive approaches to decision-making. Unfortunately, empirical research on whether at all and, if yes, in

  6. The production and transmission of covariance in the evaluation processing of fission yield data

    International Nuclear Information System (INIS)

    Liu Tingjin

    2001-01-01

    The production and transmission of correlation in the evaluation processing of fission yield data, including average with weight, ratio and sum consistence adjusting, are researched. The variation of the averaged and adjusted yields and/or rations with the correlation coefficient of the input data are investigated. The results obtained are reasonable in physics

  7. CONSUMER EVALUATIONS OF BEAUTIFICATION PRODUCTS: EFFECTS OF EXTRINSIC CUES

    Directory of Open Access Journals (Sweden)

    Md. Humayun Kabir Chowdhury

    2006-01-01

    Full Text Available This study investigates the influence of extrinsic cues, i.e. brand image, perceived price, perceived quality, and perceived country of origin on consumers' evaluative judgments for beautification products. Multi-item measures were used for data collection. Resultsrevealed that three extrinsic cues: brand image, perceived quality, and perceived country of origin have positive and significant influence on consumers' brand evaluation of beautification brands. Only perceived price has shown no such influence on consumers' brand evaluation. Finally, unanswered questions and future researchdirections are presented.

  8. A Science Products Inventory for Citizen-Science Planning and Evaluation.

    Science.gov (United States)

    Wiggins, Andrea; Bonney, Rick; LeBuhn, Gretchen; Parrish, Julia K; Weltzin, Jake F

    2018-06-01

    Citizen science involves a range of practices involving public participation in scientific knowledge production, but outcomes evaluation is complicated by the diversity of the goals and forms of citizen science. Publications and citations are not adequate metrics to describe citizen-science productivity. We address this gap by contributing a science products inventory (SPI) tool, iteratively developed through an expert panel and case studies, intended to support general-purpose planning and evaluation of citizen-science projects with respect to science productivity. The SPI includes a collection of items for tracking the production of science outputs and data practices, which are described and illustrated with examples. Several opportunities for further development of the initial inventory are highlighted, as well as potential for using the inventory as a tool to guide project management, funding, and research on citizen science.

  9. A science products inventory for citizen-science planning and evaluation

    Science.gov (United States)

    Wiggins, Andrea; Bonney, Rick; LeBuhn, Gretchen; Parrish, Julia K.; Weltzin, Jake F.

    2018-01-01

    Citizen science involves a range of practices involving public participation in scientific knowledge production, but outcomes evaluation is complicated by the diversity of the goals and forms of citizen science. Publications and citations are not adequate metrics to describe citizen-science productivity. We address this gap by contributing a science products inventory (SPI) tool, iteratively developed through an expert panel and case studies, intended to support general-purpose planning and evaluation of citizen-science projects with respect to science productivity. The SPI includes a collection of items for tracking the production of science outputs and data practices, which are described and illustrated with examples. Several opportunities for further development of the initial inventory are highlighted, as well as potential for using the inventory as a tool to guide project management, funding, and research on citizen science.

  10. A Science Products Inventory for Citizen-Science Planning and Evaluation

    Science.gov (United States)

    Wiggins, Andrea; Bonney, Rick; LeBuhn, Gretchen; Parrish, Julia K; Weltzin, Jake F

    2018-01-01

    Abstract Citizen science involves a range of practices involving public participation in scientific knowledge production, but outcomes evaluation is complicated by the diversity of the goals and forms of citizen science. Publications and citations are not adequate metrics to describe citizen-science productivity. We address this gap by contributing a science products inventory (SPI) tool, iteratively developed through an expert panel and case studies, intended to support general-purpose planning and evaluation of citizen-science projects with respect to science productivity. The SPI includes a collection of items for tracking the production of science outputs and data practices, which are described and illustrated with examples. Several opportunities for further development of the initial inventory are highlighted, as well as potential for using the inventory as a tool to guide project management, funding, and research on citizen science. PMID:29867254

  11. Evaluating Terra MODIS Satellite Sensor Data Products for Maize ...

    African Journals Online (AJOL)

    Evaluating Terra MODIS Satellite Sensor Data Products for Maize Yield Estimation in South Africa. C Frost, N Thiebaut, T Newby. Abstract. The Free State Province of the Republic of South Africa contains some of the most important maize-producing areas in South Africa. For this reason this province has also been selected ...

  12. 21 CFR 106.30 - Finished product evaluation.

    Science.gov (United States)

    2010-04-01

    ... degradation; and (ii) All nutrients not previously analyzed for by the manufacturers, unless each in-process... specified in § 106.20(b). No analyses are needed for linoleic acid, vitamin D, vitamin K, choline, inositol... maintenance of nutrient content throughout the shelf life of the product. (c) The manufacturer shall evaluate...

  13. Performance, Carcass Evaluation And Economics Of Production Of ...

    African Journals Online (AJOL)

    An eight-weeks feeding trial involving 162,8-week old goldline cockerel birds was carried out in a completely randomized design to evaluate the performance, carcass characteristics and economics of production of cockerels fed whole cassava plant meal (WCPM). Diet 1 was maize based and served as the control, diet 2 ...

  14. Evaluation of four apicultural products for hive colonization by honey ...

    African Journals Online (AJOL)

    Four apicultural products (honey, bee wax, slum gum and propolis) were evaluated for their potentials to attract the African honey bee (Apis mellifera adansonii) colony into artificial hives and their effect on infestation by apicultural insect pests. Ten grammes each of propolis, bee wax and slum gum and 10 ml of honey were ...

  15. Evaluation of transitional and modern hives for honey production in ...

    African Journals Online (AJOL)

    The study was conducted in Adami Tulu and Arsi Negelle districts from September 2009 to June 2012 to evaluate productivity performance of transitional and modern box bee hives. Based on farmers' capacity, one modern box hive and one transitional hive made from locally available materials were used at each of the ...

  16. Evaluation of biogas production rate and biochemical changes in ...

    African Journals Online (AJOL)

    The rate of biogas generation and biochemical changes in pig dung used in a simple mobile biogas digester designed and constructed at the Department of Environmental Technology, Federal University of Technology Owerri, Nigeria were evaluated. Measurable gas production started 4 days after feeding the digester with ...

  17. Evaluation of the acute toxicity of refined petroleum products against ...

    African Journals Online (AJOL)

    Static and static-renewal evaluation of the acute toxicity of three refined petroleum products — petrol, kerosene and diesel — against two freshwater animals, the mollusc Pila ovata and the fish Poecilia reticulata, was conducted in the laboratory. Petrol, kerosene and diesel were found to be moderately toxic to the test ...

  18. Production and quality evaluation of probiotic soy milk | Onyibe ...

    African Journals Online (AJOL)

    Soy milk is produced from a protein rich legume with high nutritional value. Adding probiotic agent(s) to soy milk increases its health value. In this study, soy milk and probiotic soy milk samples were produced, their qualities evaluated and shelf life at different temperatures of storage monitored. Products were of good taste ...

  19. Evaluation of cashmere production of the meat producing Boer goat

    CSIR Research Space (South Africa)

    Roux, JA

    2008-11-01

    Full Text Available South Africa does not produce cashmere commercially and presently there is no local cashmere industry. The Boer goat is well known for its meat production and is an established farming enterprise in South Africa. The aim of this study is to evaluate...

  20. An Exploratory Product Evaluation of the Manchester Motor Skills Programme

    Science.gov (United States)

    Lodal, Katherine; Bond, Caroline

    2017-01-01

    This study is an exploratory product evaluation of the Manchester Motor Skills Programme (MMSP). A mixed methodology was used to explore intended, unintended, positive and negative outcomes for four Key Stage 2 (KS2) children with motor skills difficulties who participated in the MMSP. The children's motor skills, social skills and self-esteem…

  1. In vitro comparative evaluation of co-trimoxazole tablet products ...

    African Journals Online (AJOL)

    Bacterial resistance to trimethoprim-sulphamethoxazole is a rapidly increasing problem and is exacerbated by use of substandard products. In this work, it is aimed to evaluate the physical properties and the dissolution profiles of trimethoprim-sulphamethoxazole tablets which were obtained from drug retail outlets in Addis ...

  2. Image processing system performance prediction and product quality evaluation

    Science.gov (United States)

    Stein, E. K.; Hammill, H. B. (Principal Investigator)

    1976-01-01

    The author has identified the following significant results. A new technique for image processing system performance prediction and product quality evaluation was developed. It was entirely objective, quantitative, and general, and should prove useful in system design and quality control. The technique and its application to determination of quality control procedures for the Earth Resources Technology Satellite NASA Data Processing Facility are described.

  3. Methods to evaluate fish freshness in research and industry

    DEFF Research Database (Denmark)

    Olafsdottir, G.; Martinsdóttir, E.; Oehlenschläger, J.

    1997-01-01

    Current work in a European concerted action project 'Evaluation of Fish Freshness' (AIR3 CT94-2283) focuses on harmonizing research activities in the area of fish freshness evaluation in leading fish laboratories in Europe (see Box 1). The overall aim of the concerted action project is to validat...... measurements with respect to fish freshness evaluation. In this article, the different subgroups have summarized changes that occur in fish and methods to evaluate fish freshness as a first step towards the definition of criteria for fish freshness...

  4. Evaluating the role of the diagnostic research radiographer

    International Nuclear Information System (INIS)

    Reid, Karen; Edwards, Hazel

    2011-01-01

    The NHS has an increasingly strong focus on evidence-based medicine to underpin policy making and the development of a culture of evaluation and learning. Good quality research is the foundation for this ethos. Numbers of research projects and clinical trials involving imaging are increasing and therefore more radiographers are contributing to these studies but perhaps on some occasions they may be unaware. This paper describes the benefits of having a dedicated research radiographer within a radiology department to organise and monitor studies. We explain the procedures of the research process, the knowledge and skills that such a radiographer requires and the value of coordination and governance in developing a culture of research in a radiology department. We make suggestions to overcome perceived barriers to engaging with research and discuss the advantages and limitations of the role. Others who are considering appointing a dedicated research radiographer may find our experience helpful.

  5. Evaluation of the productive development of Melipona scutellaris beehives

    Directory of Open Access Journals (Sweden)

    Elisângela de Lima Alves

    2008-03-01

    Full Text Available Stingless beekeeping has drawn the general attention of beekeepers because of the easy management and the quality of products. Nevertheless, little is known about their production and biology. The present study evaluated the development of Melipona scutellaris hives, considering the production parameters in a beekeeping environment. The growth parameter of hives is food storage. In the case of M. scutellaris, storage is made inside beeswax pots. Therefore, beeswax pots in the hives were classified and counted as nectar pots, pollen pots, open pots, closed pots and empty pots. Hive dimensions were also taken and evaluated. The results indicated that hives show different amounts of pots that vary as a function of the number of individuals in the hive. It was confirmed that the availability of food resources determines the utilization of food storage, i.e., if there is resource limitation and foraging is compromised, bees utilize the food that is stored inside the pots.

  6. Economic evaluation of coalbed methane production in China

    International Nuclear Information System (INIS)

    Luo Dongkun; Dai Youjin

    2009-01-01

    Roaring natural gas demand, energy security and environment protection concerns coupled with stringent emission reduction requirement have made China's abundant coalbed methane (CBM) resource an increasingly valuable energy source. However, not all of China's CBM resource is economic to develop under current technological condition and economic situation. In order to locate the CBM resource with economic viability to develop in China, economic evaluation of CBM production is conducted by applying net present value (NPV) method. The results indicate that more than half of CBM resource in China is economic to develop. It shows that CBM price, production rate and operating costs are the three major factors with most impact on the economic viability of the CBM development in target areas in China. The result also demonstrates that the economic limit production is roughly 1200 cubic meters per day. These economic evaluation results provide important information for both CBM companies and China government.

  7. Evaluating Faculty Work: Expectations and Standards of Faculty Performance in Research Universities

    Science.gov (United States)

    Hardre, Patricia; Cox, Michelle

    2009-01-01

    Expectations and the way they are communicated can influence employees' motivation and performance. Previous research has demonstrated individual effects of workplace climate and individual differences on faculty productivity. The present study focused on the characteristics of institutional performance standards, evaluation processes and…

  8. Tables of RCN-2 fission-product cross section evaluation

    International Nuclear Information System (INIS)

    Gruppelaar, H.

    1979-05-01

    This report (continuation of ECN-13 and ECN-33) describes the third part of the RCN-2 evaluation of neutron cross sections for fission product nuclides in KEDAK format. It contains evaluated data for nine nuclides, i.e. 142 Nd, 143 Nd, 144 Nd, 145 Nd, 146 Nd, 147 Nd, 148 Nd, 150 Nd and 147 Pm. Most emphasis has been given to the evaluation of the radiative capture cross section, in order to provide a data base for adjustment calculations using results of integral measurements. Short evaluation reports are given for this cross section. The evaluated capture cross sections are compared with recent experimental differential and integral data. Graphs are given of the capture cross sections at neutron energies above 1 keV, in which also adjusted point cross sections, based upon integral STEK and CFRMF data have been plotted. Moreover, the results are compared with those of the well-known ENDF/B-IV evaluation for fission product nucleides. Finally, evaluation summaries are given, which include tables of other important neutron cross sections, such as the total, elastic scattering and inelastic scattering cross sections

  9. Evaluating the federal role in financing health-related research.

    Science.gov (United States)

    Garber, A M; Romer, P M

    1996-11-12

    This paper considers the appropriate role for government in the support of scientific and technological progress in health care; the information the federal government needs to make well-informed decisions about its role; and the ways that federal policy toward research and development should respond to scientific advances, technology trends, and changes in the political and social environment. The principal justification for government support of research rests upon economic characteristics that lead private markets to provide inappropriate levels of research support or to supply inappropriate quantities of the products that result from research. The federal government has two basic tools for dealing with these problems: direct subsidies for research and strengthened property rights that can increase the revenues that companies receive for the products that result from research. In the coming years, the delivery system for health care will continue to undergo dramatic changes, new research opportunities will emerge at a rapid pace, and the pressure to limit discretionary federal spending will intensify. These forces make it increasingly important to improve the measurement of the costs and benefits of research and to recognize the tradeoffs among alternative policies for promoting innovation in health care.

  10. Evaluation of seed production of scots pine ( Pinus sylvestris L ...

    African Journals Online (AJOL)

    This research was carried out to investigate seed production in a 13 years-old scots pine (Pinus sylvestris L.) clonal seed orchard, including 30 clones. Eight of cone and seed traits as number of fertile and infertile scales, cone volume, cone number, filled and empty seed number, seed efficiency and 1000 seed weight were ...

  11. Evaluation of the efficiency of alternative enzyme production technologies

    Energy Technology Data Exchange (ETDEWEB)

    Albaek, M.O.

    2012-03-15

    Enzymes are used in an increasing number of industries. The application of enzymes is extending into the production of lignocellulosic ethanol in processes that economically can compete with fossil fuels. Since lignocellulosic ethanol is based on renewable resources it will have a positive impact on for example the emission of green house gasses. Cellulases and hemi-cellulases are used for enzymatic hydrolysis of pretreated lignocellulosic biomass, and fermentable sugars are released upon the enzymatic process. Even though many years of research has decreased the amount of enzyme needed in the process, the cost of enzymes is still considered a bottleneck in the economic feasibility of lignocellulose utilization. The purpose of this project was to investigate and compare different technologies for production of these enzymes. The filamentous fungus Trichoderma reesei is currently used for industrial production of cellulases and hemi-cellulases. The aim of the thesis was to use modeling tools to identify alternative technologies that have higher energy or raw material efficiency than the current technology. The enzyme production by T. reesei was conducted as an aerobic fed-batch fermentation. The process was carried out in pilot scale stirred tank reactors and based on a range of different process conditions, a process model was constructed which satisfactory described the course of fermentation. The process was governed by the rate limiting mass transfer of oxygen from the gas to the liquid phase. During fermentation, filamentous growth of the fungus lead to increased viscosity which hindered mass transfer. These mechanisms were described by a viscosity model based on the biomass concentration of the fermentation broth and a mass transfer correlation that incorporated a viscosity term. An analysis of the uncertainty and sensitivity of the model indicated the biological parameters to be responsible for most of the model uncertainty. A number of alternative

  12. Evaluation of fission product neutron cross sections for JENDL

    International Nuclear Information System (INIS)

    1984-01-01

    The recent activities on the evaluation of fission product (FP) neutron cross sections for JENDL (Japanese Evaluated Nuclear Data Library) are presented briefly. The integral test of JENDL-1 FP cross section file was performed using the CFRMF sample activation data and the STEK sample reactivity data, and the ratio of experiment to calculation was nearly constant for all the samples in the STEK measurement. Therefore, a tentative analysis was performed by applying the correction to the calculated scattering reactivity component. Better agreement with the experiment was obtained after applying this correction in most cases. The evaluation work on the JENDL-2 FP neutron cross sections is now in progress. The improvement of the data evaluation is presented in an itemized form. The JENDL-2 FP file will contain the evaluated data for 100 nuclides from Kr to Tb. The improvement and the future scope of the integral test for JENDL-2 FP data are summarized. (Asami, T.)

  13. [Analysis of scientific production and bibliometric impact of a group of Spanish clinical researchers].

    Science.gov (United States)

    Miró, O; Burbano Santos, P; Trilla, A; Casademont, J; Fernandez Pérez, C; Martín-Sánchez, Fj

    2016-01-01

    To study the behaviour of several indicators of scientific production and repercussion in a group of Spanish clinical researchers and to evaluate their possible utility for interpreting individual or collective scientific pathways. We performed a unicentric, ecological pilot study involving a group of physicians with consolidated research experience. From the Science Citation Index Expanded (SCI-Expanded) database, we obtained the number of publications of each author (indicator of production) and the number of citations, impact factor and h index (indicators of repercussion). These indicators were calculated individually for each of the years of research experience and we assessed the relationship between the experience of the researcher and the value of the indicator achieved, the relationship between these indicators themselves, and their temporal evolution, both individually and for the entire group. We analysed 35 researchers with a research experience of 28.4 (9.6) years. The h index showed the lowest coefficient of variance. The relationship between the indicators and research experience was significant, albeit modest (R2 between 0.15-0.22). The 4 indicators showed good correlations. The temporal evolution of the indicators, both individual and collective, adjusted better to a second grade polynomial than a linear function: individually, all the authors obtained R2>0.90 in all the indicators; together the best adjustment was produced with the h index (R2=0.61). Based on the indicator used, substantial variations may be produced in the researchers' ranking. A model of the temporal evolution of the indicators of production and repercussion can be described in a relatively homogeneous sample of researchers and the h index seems to demonstrate certain advantages compared to the remaining indicators. This type of analysis could become a predictive tool of performance to be achieved not only for a particular researcher, but also for a homogeneous group of resear-chers

  14. Immobilisation of MTR waste in cement (product evaluation). Annual report March 1985

    International Nuclear Information System (INIS)

    Howard, C.G.; Smith, D.L.G.; Williams, J.R.A.

    1986-01-01

    This report describes work performed at Winfrith under the UKAEA's research and development programme on radioactive waste management. The work carried out during April 1984 to March 1985 on the evaluation of laboratory and 200 dm 3 scale products of cemented MTR waste was sponsored by the Department of the Environment as part of radioactive waste management research programme. The results will be used in the formulation of Government policy but at this stage they do not necessarily represent Government policy. (author)

  15. Product Meaning, Affective Use Evaluation, and Transfer: A Preliminary Study

    Directory of Open Access Journals (Sweden)

    Sacha Helfenstein

    2005-01-01

    Full Text Available The first part of this investigation explored the multidimensional nature of product meaning, referring to the variety of connotations and functions a consumer associates with a particular product category. The subsequent experiment examined the moderation effects of product meaning and other attributes of the user on (a the affective evaluation of an obstructed use interaction, and (b the transfer of emotion between devices presented as being either of the same or a different brand. Although the failure experience essentially caused frustration, this reaction varied substantially among consumers depending on product meaning, age, and gender. The results also showed that the emotion dimensions of pleasure, arousal, and dominance were affected in distinct ways, and that, in addition to the consumer variables, transfer was mainly dependent on the brand relation. Nevertheless, user frustration did not cause general brand aversion, indicating that poor designs do not unconditionally threaten the customer relationship.

  16. Evaluation of medical isotope production with the accelerator production of tritium (APT) facility

    International Nuclear Information System (INIS)

    Benjamin, R.W.; Frey, G.D.; McLean, D.C., Jr; Spicer, K.M.; Davis, S.E.; Baron, S.; Frysinger, J.R.; Blanpied, G.; Adcock, D.

    1997-01-01

    The accelerator production of tritium (APT) facility, with its high beam current and high beam energy, would be an ideal supplier of radioisotopes for medical research, imaging, and therapy. By-product radioisotopes will be produced in the APT window and target cooling systems and in the tungsten target through spallation, neutron, and proton interactions. High intensity proton fluxes are potentially available at three different energies for the production of proton- rich radioisotopes. Isotope production targets can be inserted into the blanket for production of neutron-rich isotopes. Currently, the major production sources of radioisotopes are either aging or abroad, or both. The use of radionuclides in nuclear medicine is growing and changing, both in terms of the number of nuclear medicine procedures being performed and in the rapidly expanding range of procedures and radioisotopes used. A large and varied demand is forecast, and the APT would be an ideal facility to satisfy that demand

  17. Strategies towards Evaluation beyond Scientific Impact. Pathways not only for Agricultural Research

    Directory of Open Access Journals (Sweden)

    Birge M. Wolf

    2013-12-01

    Full Text Available Various research fields, like organic agricultural research, are dedicated to solving real-world problems and contributing to sustainable development. Therefore, systems research and the application of interdisciplinary and transdisciplinary approaches are increasingly endorsed. However, research performance depends not only on self-conception, but also on framework conditions of the scientific system, which are not always of benefit to such research fields. Recently, science and its framework conditions have been under increasing scrutiny as regards their ability to serve societal benefit. This provides opportunities for (organic agricultural research to engage in the development of a research system that will serve its needs. This article focuses on possible strategies for facilitating a balanced research evaluation that recognises scientific quality as well as societal relevance and applicability. These strategies are (a to strengthen the general support for evaluation beyond scientific impact, and (b to provide accessible data for such evaluations. Synergies of interest are found between open access movements and research communities focusing on global challenges and sustainability. As both are committed to increasing the societal benefit of science, they may support evaluation criteria such as knowledge production and dissemination tailored to societal needs, and the use of open access. Additional synergies exist between all those who scrutinise current research evaluation systems for their ability to serve scientific quality, which is also a precondition for societal benefit. Here, digital communication technologies provide opportunities to increase effectiveness, transparency, fairness and plurality in the dissemination of scientific results, quality assurance and reputation. Furthermore, funders may support transdisciplinary approaches and open access and improve data availability for evaluation beyond scientific impact. If they begin to

  18. Evaluation of the state water-resources research institutes

    Science.gov (United States)

    Ertel, M.O.

    1988-01-01

    Water resources research institutes, as authorized by the Water Resources Research Act of 1984 (Public Law 98-242), are located in each state and in the District of Columbia, Guam, Puerto Rico , and the Virgin Islands. Public Law 98-242 mandated an onsite evaluation of each of these institutes to determine whether ' . . .the quality and relevance of its water resources research and its effectiveness as an institution for planning, conducting, and arranging for research warrant its continued support in the national interest. ' The results of these evaluations, which were conducted between September 1985 and June 1987, are summarized. The evaluation teams found that all 54 institutes are meeting the basic objectives of the authorizing legislation in that they: (1) use the grant funds to support research that addresses water problems of state and regional concern; (2) provide opportunities for training of water scientists through student involvement on research projects; and (3) promote the application of research results through preparation of technical reports and contributions to the technical literature. The differences among institutes relate primarily to degrees of effectiveness, and most often are determined by the financial, political, and geographical contexts in which the institutes function and by the quality of their leadership. (Lantz-PTT)

  19. Multi-criteria and econometric evaluation of dairy products

    Directory of Open Access Journals (Sweden)

    Karmen Pažek

    2014-05-01

    Full Text Available This study examined the multi-criteria assessment of four dairy products: “Pomursko mlejko” (Pomurje milk, “Lejko mleko” (light milk, “Fyto mleko” (Fyto milk and “Posneto mleko v prahu” (dried milk. The research was executed by using a multi-criteria methodology, DEX, which was complemented by an econometric analysis for light milk to estimate the trends in production and consumption before analyzed dairy products were implemented on the market. DEXi computer program results indicated that all analyzed milk products were ‘above average’. The econometric model was applied to examine changes in the demand for low-fat milk (light milk. Empirical results showed significant consumer re¬sponse to the increase in the prices of low-fat milk demonstrating income elasticity (1,15 unit.

  20. Research on effective botanical production technology. Method established for the qualitative evaluation of hydroponically cultivated teat; Shokubutsu seisan gijutsu no koritsuka kenkyu. Suiko saibaicha no hinshitsu hyokaho no kakuritsu

    Energy Technology Data Exchange (ETDEWEB)

    Ota, T; Harada, K [Hokkaido Electric Power Co. Inc., Sapporo (Japan)

    1995-06-14

    In case of cultivation on the ground, the tea is produced about five years after the transplantation. In case of hydroponic cultivation, however, it can start in about two years. Against difficulties due to the high temperature in summer, the cool summer climate of Hokkaido is good for putting the hydroponic cultivation to practical use. As the tea is a nonessential grocery item, its quality is regarded as very important, and determined by its theanine and other free amino acid content. Therefore, a new measurement method by high-speed liquid chromatography was studied to establish the method of quantitatively analyzing the free amino acid. By applying this method established, the hydroponically cultivated tea was qualitatively evaluated through classifying it and measuring its free amino acid content at each of its foliage heights. The main free amino acid contained was known to be theanine, glutamine, arginine, threonine and alamine. The theanine accounted for about 70% of all the free amino acid, and with a decrease in foliage height, its content fell. 15 refs., 20 figs., 2 tabs.

  1. Sensory evaluation of pralines containing different honey products.

    Science.gov (United States)

    Popov-Raljić, Jovanka V; Laličić-Petronijević, Jovanka G; Georgijev, Aneta S; Popov, Vladimir S; Mladenović, Mića A

    2010-01-01

    In this study, pralines manufactured by hand were evaluated sensorially. These pralines were obtained from dark chocolate containing 60% cocoa components, filled with Apis mellifera carnica Poll drone larvae, blossom honey and a blossom honey/pollen mixture from the protected region of Stara Planina-Eastern Serbia (a specific botanical region). The objectives of this study were investigations related to the use of sensory analysis for quality assessment of new functional products with potential benefits for human health, in particular of desserts based on dark chocolate pralines filled with different bee products characterized by a specific botanical and geographic origin, as well as of their storage properties and expected shelf life. Sensory quality (appearance, texture, odor and taste were evaluated by a group of experienced panelists immediately after the production (day 0), and then after 30, 90 and 180 days of storage under ambient conditions (temperature 18-20 °C). The results were statistically analyzed by the two-factorial analysis of variance (MANOVA) and with the LSD-test. It is possible to conclude that the storage time and composition of dark chocolate pralines containing different honey-bee products have statistically highly significant (p < 0.01) influence on the sensorially evaluated properties of pralines.

  2. Sensory Evaluation of Pralines Containing Different Honey Products

    Directory of Open Access Journals (Sweden)

    Mića A. Mladenović

    2010-08-01

    Full Text Available In this study, pralines manufactured by hand were evaluated sensorially. These pralines were obtained from dark chocolate containing 60% cocoa components, filled with Apis mellifera carnica Poll drone larvae, blossom honey and a blossom honey/pollen mixture from the protected region of Stara Planina-Eastern Serbia (a specific botanical region. The objectives of this study were investigations related to the use of sensory analysis for quality assessment of new functional products with potential benefits for human health, in particular of desserts based on dark chocolate pralines filled with different bee products characterized by a specific botanical and geographic origin, as well as of their storage properties and expected shelf life. Sensory quality (appearance, texture, odor and taste were evaluated by a group of experienced panelists immediately after the production (day 0, and then after 30, 90 and 180 days of storage under ambient conditions (temperature 18–20 ºC. The results were statistically analyzed by the two-factorial analysis of variance (MANOVA and with the LSD-test. It is possible to conclude that the storage time and composition of dark chocolate pralines containing different honey-bee products have statistically highly significant (p < 0.01 influence on the sensorially evaluated properties of pralines.

  3. Evaluation and Modification of Processes for Bioethanol Separation and Production

    Directory of Open Access Journals (Sweden)

    Johnner P Sitompul

    2012-04-01

    Full Text Available This paper concerns on process evaluation and modification for bioethanol separation and production by applying pinch technology. Further, the paper is also focused on obtaining a most energy-efficient process among several processes. Three basic process configurations of bioethanol separation and production were selected for this study. The three separations and production systems are Othmer process, Barbet process and a separation process that operates under vacuum condition. Basically, each process is combination of Danish Distilleries process with a separation system yielding 95% (v/v bioethanol. The production capacity of the plant is estimated about 4 x 107 litre of bioethanol 95% (v/v per year. The result of the studies shows that the most energy efficient process among the three processes evaluated is the Othmer process, followed by the Barbet process and the process involving vacuum operation. The evaluation also shows that further energy saving can be carried for Barbet and Othmer process configuration when Tmin = 10oC for heat exchange possible.

  4. Comprehensive Evaluation of Algal Biofuel Production: Experimental and Target Results

    Directory of Open Access Journals (Sweden)

    Colin M. Beal

    2012-06-01

    Full Text Available Worldwide, algal biofuel research and development efforts have focused on increasing the competitiveness of algal biofuels by increasing the energy and financial return on investments, reducing water intensity and resource requirements, and increasing algal productivity. In this study, analyses are presented in each of these areas—costs, resource needs, and productivity—for two cases: (1 an Experimental Case, using mostly measured data for a lab-scale system, and (2 a theorized Highly Productive Case that represents an optimized commercial-scale production system, albeit one that relies on full-price water, nutrients, and carbon dioxide. For both cases, the analysis described herein concludes that the energy and financial return on investments are less than 1, the water intensity is greater than that for conventional fuels, and the amounts of required resources at a meaningful scale of production amount to significant fractions of current consumption (e.g., nitrogen. The analysis and presentation of results highlight critical areas for advancement and innovation that must occur for sustainable and profitable algal biofuel production can occur at a scale that yields significant petroleum displacement. To this end, targets for energy consumption, production cost, water consumption, and nutrient consumption are presented that would promote sustainable algal biofuel production. Furthermore, this work demonstrates a procedure and method by which subsequent advances in technology and biotechnology can be framed to track progress.

  5. Brand Personality: Production Routes and National Research Agenda

    Directory of Open Access Journals (Sweden)

    Fernanda Bueno Cardoso Scussel

    2016-09-01

    Full Text Available This paper proposes a conceptual framework about brand personality, drawing a scenario of studies on the construct through a review that covers synthesis of the state of the art and a bibliometric study, produced in brazilian journals in business administration and psychology, from 2001 to 2015, in order to highlight the production in the new millennium. It is a qualitative research through systematic and bibliometric review, in which 64 national journals were analyzed, resulting in eight articles on brand personality, categorized according to demographic, institutional and methodological criteria. As a main conclusion, there is the incipient in nationwide surveys, the need for theoretical and empirical development of the construct, measure validation and relational studies. The aim is thus to contribute to the theoretical development in studies of brands and present reflections and guidelines, building a useful starting point for conducting further investigations.

  6. Evaluation of the RATU2 and RETU research programs

    International Nuclear Information System (INIS)

    Faidy, C.; Hayns, M.R.

    1998-05-01

    The report is an evaluation of the Finnish RATU2 (Structural Integrity of Nuclear Power Plants) and RETU (Reactor Safety) programs. The first generation of nuclear safety research programs were started in 1988-1990. Mid-term reviews were carried out and published in 1992. Many of the recommendations from those reviews have been implemented and they are referred to in this evaluation report

  7. TRIGA International - History of Training Research Isotope production General Atomics

    International Nuclear Information System (INIS)

    2008-01-01

    TRIGA conceived at GA in 1956 by a distinguished group of scientists including Edward Teller and Freeman Dyson. First TRIGA reactor Mk-1 was commissioned on 3 may 1958 at G.A. Characteristic feature of TRIGA reactors is inherent safety: Sitting can be confinement or conventional building. TRIGA reactors are the most prevalent in the world: 67 reactors in 24 countries. Steady state powers up to 14 MWt, pulsing up to 22,000 MWt. To enlarge the scope of its manufactured products, CERCA engaged in a Joint Venture with General Atomics, and in July 1995 a new Company was founded: TRIGA INTERNATIONAL SAS (50% GA, 50% CERCA; Head Office: Paris (France); Sales offices: GA San Diego (Ca, USA) and CERCA Lyon (France); Manufacturing plant: CERCA Romans. General Atomics ID: founded in 1955 at San Diego, California, by General Dynamics; status: Privately held corporation; owners: Neal and Linden Blue; business: High technology research, design, manufacturing, and production for industry and Government in the U.S. and overseas; locations: U.S., Germany, Japan, Australia, Thailand, Morocco; employees: 5,000. TRIGA's ID: CERCA is a subsidiary of AREVA, born in November 05, 1957. Activities: fuel manufacture for research reactor, equipment and components for high-energy physics, radioactive sources and reference sources; plants locations: Romans and Pierrelatte (France); total strength: 180. Since the last five years TRIGA has manufactured and delivered more than 800 fuel elements with a door to door service. TRIGA International has the experience to manufacture all types of TRIGA fuel: standard fuel elements, instrumented fuel elements, fuel followed control rods, geometry: 37.3 mm (1.47 in.), 35.8 mm (1.4 in), 13 mm (0.5 in), chemical Composition: U w% 8.5, 12, 20, 30 and 45 w/o, erbium and no erbium. TRIGA International is on INL's approved vendor list (ISO 9000/NQA) and is ready to meet any TRIGA fuel needs either in the US or worldwide

  8. Profiles of Information Consumption and Production of CIEMAT Researches within the Period 2005-2007

    International Nuclear Information System (INIS)

    Sanz, C.

    2010-01-01

    Given the importance of scientific and technological evaluation in the current international scene, the goal is to show CIEMAT researchers' profiles on information consumption and production through different biblio metric indicators, mainly quantitative. Taking further steps based on this data, margins of coincidence on both patterns will be carefully checked not only from a group perspective but also on an individual scale, in the most widely used scientific journals. This analysis shall reveal the information needs of researchers for the future design of documentary strategies. (Author) 21 refs.

  9. General scheme of research reactor mainly for production of fission 99Mo

    International Nuclear Information System (INIS)

    Shen Feng; Liu Xingmin; Wu Xiaochun; Sun Zheng; Guo Chunqiu; Yi Dayong

    2012-01-01

    On the basis of the analysis for current circumstance and development tendency of research reactor mainly for 99 Mo production in the world, the design idea of this sort of research reactor was proposed. By the optimization and basic design, the general design parameters of the reactor were analyzed and testified. The evaluation of output activities of 99 Mo and the analysis of economics were conducted on the basically assumption. It is argued that the economics of this reactor is improved dramatically while the safety is ensured by the analysis. (authors)

  10. Radioisotope Production Plan and Strategy of Kijang Research Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Kye Hong; Lee, Jun Sig [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-05-15

    This reactor will be located at Kijang, Busan, Korea and be dedicated to produce mainly medical radioisotopes. Tc-99m is very important isotope for diagnosis and more than 80% of radiation diagnostic procedures in nuclear medicine depend on this isotope. There were, however, several times of insecure production of Mo-99 due to the shutdown of major production reactors worldwide. OECD/NEA is leading member countries to resolve the shortage of this isotope and trying to secure the international market of Mo-99. The radioisotope plan and strategy of Kijang Research Reactor (KJRR) should be carefully established to fit not only the domestic but also international demand on Mo-99. The implementation strategy of 6 principles of HLG-MR should be established that is appropriate to national environments. Ministry of Science, ICT and Future Planning and Ministry of Health and welfare should cooperate well to organize the national radioisotope supply structure, to set up the reasonable and competitive pricing of radioisotopes, and to cope with the international supply strategy.

  11. Evaluation of strategic research programs: The case of Danish environmental research 1993-2002

    DEFF Research Database (Denmark)

    Ingwersen, Peter Emil Rerup; Larsen, Birger

    2007-01-01

    The article reports on the mid-term and final scientometric evaluations of the Danish Strategic Environmental Research Program (SMP), which consisted of 13 virtual research centers from 1993 to 1997, nine of which are studied bibliometrically here. Citations are measured from 1993 to 2002. Central...

  12. Evaluation and monitoring of the satisfaction of meat and meat products consumers

    Directory of Open Access Journals (Sweden)

    Corina Constanta Rușeț

    2014-05-01

    Full Text Available The managers have to be focused on clients and satisfy their needs, so that the products meet their expectations. The evaluation and monitoring the consumers satisfaction is very important because it is a managerial instrument which offers the possibility to understand and satisfy the needs of the existing consumers. In this study we used the questionnaire as research method and after analyzing and processing the data we noticed the consumers preferences related to the meat and meat products consumption, the frequency of consumption and the places from where the consumers procure their meat and meat products.

  13. Critical Research for Cost-Effective Photoelectrochemical Production of Hydrogen

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Liwei [Midwest Optoelectronics, LLC, Toledo, OH (United States); Deng, Xunming [Univ. of Toledo, OH (United States); Abken, Anka [Midwest Optoelectronics, LLC, Toledo, OH (United States); Cao, Xinmin [Midwest Optoelectronics, LLC, Toledo, OH (United States); Du, Wenhui [Midwest Optoelectronics, LLC, Toledo, OH (United States); Vijh, Aarohi [Xunlight Corporation, Toledo, OH (United States); Ingler, William [Univ. of Toledo, OH (United States); Chen, Changyong [Univ. of Toledo, OH (United States); Fan, Qihua [Univ. of Toledo, OH (United States); Collins, Robert [Univ. of Toledo, OH (United States); Compaan, Alvin [Univ. of Toledo, OH (United States); Yan, Yanfa [Univ. of Toledo, OH (United States); Giolando, Dean [Univ. of Toledo, OH (United States); Turner, John [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-10-29

    The objective of this project is to develop critical technologies required for cost-effective production of hydrogen from sunlight and water using a-Si triple junction solar cell based photo-electrodes. In this project, Midwest Optoelectronics, LLC (MWOE) and its collaborating organizations utilize triple junction a-Si thin film solar cells as the core element to fabricate photoelectrochemical (PEC) cells. Triple junction a-Si/a-SiGe/a-SiGe solar cell is an ideal material for making cost-effective PEC system which uses sun light to split water and generate hydrogen. It has the following key features: 1) It has an open circuit voltage (Voc ) of ~ 2.3V and has an operating voltage around 1.6V. This is ideal for water splitting. There is no need to add a bias voltage or to inter-connect more than one solar cell. 2) It is made by depositing a-Si/a-SiGe/aSi-Ge thin films on a conducting stainless steel substrate which can serve as an electrode. When we immerse the triple junction solar cells in an electrolyte and illuminate it under sunlight, the voltage is large enough to split the water, generating oxygen at the Si solar cell side (for SS/n-i-p/sunlight structure) and hydrogen at the back, which is stainless steel side. There is no need to use a counter electrode or to make any wire connection. 3) It is being produced in large rolls of 3ft wide and up to 5000 ft long stainless steel web in a 25MW roll-to-roll production machine. Therefore it can be produced at a very low cost. After several years of research with many different kinds of material, we have developed promising transparent, conducting and corrosion resistant (TCCR) coating material; we carried out extensive research on oxygen and hydrogen generation catalysts, developed methods to make PEC electrode from production-grade a-Si solar cells; we have designed and tested various PEC module cases and carried out extensive outdoor testing; we were able to obtain a solar to hydrogen conversion efficiency (STH

  14. Scientific Production of Research Fellows at the Zagreb University School of Medicine, Croatia

    Science.gov (United States)

    Polašek, Ozren; Kolčić, Ivana; Buneta, Zoran; Čikeš, Nada; Pećina, Marko

    2006-01-01

    Aim To evaluate scientific production among research fellows employed at the Zagreb University School of Medicine and identify factors associated with their scientific output. Method We conducted a survey among research fellows and their mentors during June 2005. The main outcome measure was publication success, defined for each fellow as publishing at least 0.5 articles per employment year in journals indexed in the Current Contents bibliographic database. Bivariate methods and binary logistic regression were used in data analysis. Results A total of 117 fellows (response rate 95%) and 83 mentors (100%) were surveyed. The highest scientific production was recorded among research fellows employed in public health departments (median 3.0 articles, interquartile range 4.0), compared with those from pre-clinical (median 0.0, interquartile range 2.0) and clinical departments (median 1.0, interquartile range 2.0) (Kruskal-Wallis, P = 0.003). A total of 36 (29%) research fellows published at least 0.5 articles per employment year and were considered successful. Three variables were associated with fellows’ publication success: mentor’s scientific production (odds ratio [OR], 3.14; 95% confidence interval [CI], 1.31-7.53), positive mentor’s assessment (OR, 3.15; 95% CI, 1.10-9.05), and fellows’ undergraduate publication in journals indexed in the Current Contents bibliographic database (OR, 4.05; 95% CI, 1.07-15.34). Conclusion Undergraduate publication could be used as one of the main criteria in selecting research fellows. One of the crucial factors in a fellow’s scientific production and career advancement is mentor’s input, which is why research fellows would benefit most from working with scientifically productive mentors. PMID:17042070

  15. Soft Robotics Commercialization: Jamming Grippers from Research to Product

    Science.gov (United States)

    Cheng, Nadia; Fakhouri, Sami; Culley, Bill

    2016-01-01

    Abstract Recent work in the growing field of soft robotics has demonstrated a number of very promising technologies. However, to make a significant impact in real-world applications, these new technologies must first transition out of the laboratory through successful commercialization. Commercialization is perhaps the most critical future milestone facing the field of soft robotics today, and this process will reveal whether the apparent impact we now perceive has been appropriately estimated. Since 2012, Empire Robotics has been one of the first companies to attempt to reach this milestone through our efforts to commercialize jamming-based robotic gripper technology in a product called VERSABALL®. However, in spring 2016 we are closing our doors, having not been able to develop a sustainable business around this technology. This article presents some of the key takeaways from the technical side of the commercialization process and lessons learned that may be valuable to others. We hope that sharing this information will provide a frame of reference for technology commercialization that can help others motivate research directions and maximize research impact. PMID:28078197

  16. Evaluation of microbial content of some soybean milk products ...

    African Journals Online (AJOL)

    Evaluating the microbiological content of soybean milk, highly consumed by the public is the aim of this research work. Ten samples of soybean milk, locally prepared by different manufacturers were used for the study. The microbial load and identity of the microorganisms present were determined using standard ...

  17. Thermodynamic evaluation of biomass-to-biofuels production systems

    International Nuclear Information System (INIS)

    Piekarczyk, Wodzisław; Czarnowska, Lucyna; Ptasiński, Krzysztof; Stanek, Wojciech

    2013-01-01

    Biomass is a renewable feedstock for producing modern energy carriers. However, the usage of biomass is accompanied by possible drawbacks, mainly due to limitation of land and water, and competition with food production. In this paper, the analysis concerns so-called second generation biofuels, like Fischer–Tropsch fuels or Substitute Natural Gas which are produced either from wood or from waste biomass. For these biofuels the most promising conversion case is the one which involves production of syngas from biomass gasification, followed by synthesis of biofuels. The thermodynamic efficiency of biofuels production is analyzed and compared using both the direct exergy analysis and the thermo-ecological cost. This analysis leads to the detection of exergy losses in various elements which forms the starting point to the improvement of conversion efficiency. The efficiency of biomass conversion to biofuels is also evaluated for the whole production chain, including biomass cultivation, transportation and conversion. The global effects of natural resources management are investigated using the thermo-ecological cost. The energy carriers' utilities such as electricity and heat are externally generated either from fossil fuels or from renewable biomass. In the former case the production of biofuels not always can be considered as a renewable energy source whereas in the latter case the production of biofuels leads always to the reduction of depletion of non-renewable resources

  18. Comprehensive evaluation method in application of nuclear DCS product design

    International Nuclear Information System (INIS)

    Wang Weixin; Zhao Zhemin; Shi Yingbin

    2014-01-01

    In order to select the best design proposal in short time, the TOPSIS comprehensive evaluation method in the nuclear power plant DCS product design was introduced. It can intuitively show the different design proposals good or not good by data and shorten the time of the design proposal optimization. The design proposal selected by this method will be more reasonable and has good comprehensive performance indexes. The TOPSIS comprehensive evaluation method achieves good result in one of the nuclear power plant DCS cabinet design proposal optimization. (authors)

  19. SKB's program for societal research 2004-2011. An evaluation

    International Nuclear Information System (INIS)

    Soederberg, Olof

    2012-04-01

    This evaluation of the program of societal research that SKB conducted the years 2004-2011 has been performed on behalf of Swedish Nuclear Fuel and Waste Management Company (SKB). The review has focused on answers to a series of questions as follows: General questions - Why was a program started? - What was SKB's purpose with the program? - Does the result mean that the objective has been achieved? - Has the program had effects (positive or negative) that were not anticipated when the purpose was formulated? - Strengths and weaknesses of the program? Questions about the implementation - How did announcement and selection procedures work? - Which forms were used for reporting results from the research projects? Questions about the continued investment in societal research - Are there such needs? - In that case, is it in SKB's interest to contribute financially to such research? - What forms might be appropriate if SKB sees interest to contribute financially to such research?

  20. CLINICAL AND PHYSIOLOGICAL EVALUATION OF SPECIALIZED FOOD PRODUCT FOR PREGNANT WOMEN

    Directory of Open Access Journals (Sweden)

    I. V. Salimova

    2012-01-01

    Full Text Available We have evaluated specialized product «Celia Mama» for pregnant women nutrition. 15 women on 31–32 week of pregnancy took part in the study. The duration of the product intake was 6,5 ± 1,5 wk. Tolerability was evaluated according to a personal attitude towards it and impartial clinical parameters such as — skin and mucosa condition, presence of allergy, presence or worsening of gastrointestinal dysfunction (heartburn, flatulence, stomach ache, stools (amount, consistency, digestibility, pathological inclusions, colour, smell. It has been shown that this product possesses adequate organoleptic qualities and is well tolerated by pregnant women. This product has passed hygienic expertise in our Scientific Research Centre and judging upon results of our study we can conclude that it can be used as a food supplement for pregnant women..

  1. A Theoretical and Methodological Evaluation of Leadership Research.

    Science.gov (United States)

    Lashbrook, Velma J.; Lashbrook, William B.

    This paper isolates some of the strengths and weaknesses of leadership research by evaluating it from both a theoretical and methodological perspective. The seven theories or approaches examined are: great man, trait, situational, style, functional, social influence, and interaction positions. General theoretical, conceptual, and measurement…

  2. Exploring Action Research as an Approach to Interactive (Participatory) Evaluation

    Science.gov (United States)

    Chaudary, Imran Anjum; Imran, Shahida

    2012-01-01

    This investigation seeks to understand "action research" as an approach to "interactive form of evaluation". The first half of the investigation illuminates the approach with the help of the selective body of literature and the second half draws attention to its application in the field with the help of an authentic evaluation…

  3. Rules of Thumb from the Literature on Research and Evaluation.

    Science.gov (United States)

    Lai, Morris K.

    Practical advice on frequently asked questions dealing with research and evaluation methodology is presented as rules of thumb, with citations to the author's sources. A statement in the literature is considered a rule of thumb if it meets one of the following criteria: (1) it is specifically called a rule of thumb; (2) it contains numbers in…

  4. Childhood Obesity Research Demonstration project: Cross-site evaluation method

    Science.gov (United States)

    The Childhood Obesity Research Demonstration (CORD) project links public health and primary care interventions in three projects described in detail in accompanying articles in this issue of Childhood Obesity. This article describes a comprehensive evaluation plan to determine the extent to which th...

  5. Research Note Nutritional evaluation of Ficus thonningii Blume ...

    African Journals Online (AJOL)

    Research Note Nutritional evaluation of Ficus thonningii Blume leaves as ruminant livestock feed in the Ahferom district of Tigray, Ethiopia. ... Data on foliar nitrogen (N), phosphorus (P), potassium (K), dry matter (DM), crude protein (CP), digestible crude protein (DCP), ether extract (EE), crude fibre (CF), ash content and ...

  6. Results of a Research Evaluating Quality of Computer Science Education

    Science.gov (United States)

    Záhorec, Ján; Hašková, Alena; Munk, Michal

    2012-01-01

    The paper presents the results of an international research on a comparative assessment of the current status of computer science education at the secondary level (ISCED 3A) in Slovakia, the Czech Republic, and Belgium. Evaluation was carried out based on 14 specific factors gauging the students' point of view. The authors present qualitative…

  7. Acoustic evaluation of standing trees : recent research development

    Science.gov (United States)

    Xiping Wang; Robert J. Ross; Peter Carter

    2005-01-01

    This paper presents some research results from recent trial studies on measuring acoustic velocities on standing trees of five softwood species. The relationships between tree velocities measured by time of flight method and log velocities measured by resonance method were evaluated. Theoretical and empirical models were developed for adjusting observed tree velocity...

  8. Joint panel on occupational and environmental research for uranium production

    International Nuclear Information System (INIS)

    Hamel, P.; Zahary, G.

    1978-01-01

    The objectives of the panel are the following: to produce an annual inventory of relevant research being conducted by the supporting members; to exchange information on projected and completed research; to identify research needs and to stimulate research activity

  9. Nuclear data for production of therapeutic radionuclides. Summary report of second research coordination meeting

    International Nuclear Information System (INIS)

    Sublet, J.-Ch.; Capote Noy, R.

    2004-11-01

    A summary is given of the Second Research Coordination Meeting on Nuclear Data for Production of Therapeutic Radionuclides. The new library of evaluated cross section will cover the reactor and/or accelerator production of therapeutic radionuclides to appropriate specific activities and purity along with the relevant decay data. There are a significant number of radioisotopes in use or being proposed for therapeutic applications. As a consequence of the work undertaken during the course of this CRP, the resulting completeness and accuracy of the nuclear data for the production of these nuclides to appropriate specific activities and purity along with the re-definition of their decay data should be adequate for safe and efficient medical applications. The radioisotopes to be considered in the CRP were divided into two categories: Established Radioisotopes (therapeutic radioisotopes that have established clinical uses) and Emerging Radioisotopes (less-commonly used but potentially interesting radioisotopes for which medical applications have been demonstrated). Experimental data compilations and selection and preliminary evaluations for each of the reactions were extensively discussed during the meeting. The recommendations for both established and emerging radionuclides, and validation/testing of the cross section library are summarized. Technical discussions and the resulting work plan of the Coordinated Research Programme are summarized for every reaction path to be evaluated, along with actions and deadlines. Participants' contributions to the RCM are also attached. (author)

  10. Evaluation of Neutron Induced Reactions for 32 Fission Products

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeong Il

    2007-02-15

    Neutron cross sections for 32 fission products were evaluated in the neutron-incident energy range from 10{sup -5} eV to 20 MeV. The list of fission products consists of the priority materials for several applications, extended to cover complete isotopic chains for three elements. The full list includes 8 individual isotopes, {sup 95}Mo, {sup 101}Ru, {sup 103}Rh, {sup 105}Pd, {sup 109}Ag, {sup 131}Xe, {sup 133}Cs, {sup 141}Pr, and 24 isotopes in complete isotopic chains for Nd (8), Sm (9) and Dy (7). Our evaluation methodology covers both the low energy region and the fast neutron region.In the low energy region, our evaluations are based on the latest data published in the Atlas of Neutron Resonances. This resource was used to infer both the thermal values and the resolved resonance parameters that were validated against the capture resonance integrals. In the unresolved resonance region we performed the additional evaluation by using the averages of the resolved resonances and adjusting them to the experimental data.In the fast neutron region our evaluations are based on the nuclear reaction model code EMPIRE-2.19 validated against the experimental data. EMPIRE is the modular system of codes consisting of many nuclear reaction models, including the spherical and deformed Optical Model, Hauser-Feshbach theory with the width fluctuation correction and complete gamma-ray emission cascade, DWBA, Multi-step Direct and Multi-step Compound models, and several versions of the phenomenological preequilibrium models. The code is equipped with a power full GUI, allowing an easy access to support libraries such as RIPL and CSISRS, the graphical package, as well the utility codes for formatting and checking. In general, in our calculations we used the Reference Input Parameter Library, RIPL, for the initial set model parameters. These parameters were properly adjusted to reproduce the available experimental data taken from the CSISRS library. Our evaluations cover cross

  11. Evaluation of Neutron Induced Reactions for 32 Fission Products

    International Nuclear Information System (INIS)

    Kim, Hyeong Il

    2007-02-01

    Neutron cross sections for 32 fission products were evaluated in the neutron-incident energy range from 10 -5 eV to 20 MeV. The list of fission products consists of the priority materials for several applications, extended to cover complete isotopic chains for three elements. The full list includes 8 individual isotopes, 95 Mo, 101 Ru, 103 Rh, 105 Pd, 109 Ag, 131 Xe, 133 Cs, 141 Pr, and 24 isotopes in complete isotopic chains for Nd (8), Sm (9) and Dy (7). Our evaluation methodology covers both the low energy region and the fast neutron region.In the low energy region, our evaluations are based on the latest data published in the Atlas of Neutron Resonances. This resource was used to infer both the thermal values and the resolved resonance parameters that were validated against the capture resonance integrals. In the unresolved resonance region we performed the additional evaluation by using the averages of the resolved resonances and adjusting them to the experimental data.In the fast neutron region our evaluations are based on the nuclear reaction model code EMPIRE-2.19 validated against the experimental data. EMPIRE is the modular system of codes consisting of many nuclear reaction models, including the spherical and deformed Optical Model, Hauser-Feshbach theory with the width fluctuation correction and complete gamma-ray emission cascade, DWBA, Multi-step Direct and Multi-step Compound models, and several versions of the phenomenological preequilibrium models. The code is equipped with a power full GUI, allowing an easy access to support libraries such as RIPL and CSISRS, the graphical package, as well the utility codes for formatting and checking. In general, in our calculations we used the Reference Input Parameter Library, RIPL, for the initial set model parameters. These parameters were properly adjusted to reproduce the available experimental data taken from the CSISRS library. Our evaluations cover cross sections for almost all reaction channels

  12. Citation ranking versus peer evaluation of senior faculty research performance

    DEFF Research Database (Denmark)

    Meho, Lokman I.; Sonnenwald, Diane H.

    2000-01-01

    The purpose of this study is to analyze the relationship between citation ranking and peer evaluation in assessing senior faculty research performance. Other studies typically derive their peer evaluation data directly from referees, often in the form of ranking. This study uses two additional...... indicator of research performance of senior faculty members? Citation data, book reviews, and peer ranking were compiled and examined for faculty members specializing in Kurdish studies. Analysis shows that normalized citation ranking and citation content analysis data yield identical ranking results....... Analysis also shows that normalized citation ranking and citation content analysis, book reviews, and peer ranking perform similarly (i.e., are highly correlated) for high-ranked and low-ranked senior scholars. Additional evaluation methods and measures that take into account the context and content...

  13. Emotions in consumer research : An application to novel food products

    NARCIS (Netherlands)

    Laros, F.J.M.

    2006-01-01

    During the last decades the general public has been confronted with a continuous stream of radically new food products as well as technologies that can be used to improve food production and food products. It is rather difficult, however, to convince consumers to accept these new products. For

  14. ITRF2014 Evaluation with ILRS Data and Products

    Science.gov (United States)

    Pavlis, E. C.; Luceri, V.; Kuzmicz-Cieslak, M.; König, D.; Bianco, G.

    2015-12-01

    The development and release of the new realization of the International Terrestrial Reference Frame—ITRF2014 requires elaborate testing to ensure the quality of the final product. The evaluation effort ensures that the ITRF is of the indicated quality by its error estimates and the combination has not compromised the contributing techniques' input. The International Laser Ranging Service (ILRS) contributes unique information that only Satellite Laser Ranging—SLR is sensitive to: the definition of the origin, and in equal parts with VLBI, the scale of the model. The ILRS analysts adopted a revision of the internal standards and procedures in developing our contribution to ITRF2014 from our eight Analysis Centers. Anticipating the release of ITRF2014 we worked on designing and executing tests using data and products unique to ILRS. In addition to the data contributed to ITRF2014, ILRS has several other targets, in lower and higher orbits, the SLR tracking data of which are used as independent data for the evaluation process. Since SLR data are primarily sensitive to the origin and scale definition of the TRF model, these model attributes are the best to be validated using SLR data. LAGEOS and ETALON data collected outside the span of data used in ITRF2014 can also evaluate the quality of the estimated velocity vectors. The use of independent SLR data evaluates the model throughout the period that such data are available. SLR data from low altitude missions can validate the performance of the model from the late '70s all the way to present (using e.g. STARLETTE and LARES data). This presentation will give an overview of the new model's evaluation using exclusively ILRS tracking data and other ILRS products.

  15. The influence of the image of a product's region of origin on product evaluation

    NARCIS (Netherlands)

    Ittersum, van K.; Candel, M.J.J.M.; Meulenberg, M.T.G.

    2003-01-01

    In the marketing literature, the influence of a place-of-origin indication on the evaluation of products has been studied with little consideration for the image of the place of origin as a separate construct. Although effects of a place-of-origin indication have been found, it is still unclear what

  16. Assessing consumer responses to potential reduced-exposure tobacco products: a review of tobacco industry and independent research methods.

    Science.gov (United States)

    Rees, Vaughan W; Kreslake, Jennifer M; Cummings, K Michael; O'Connor, Richard J; Hatsukami, Dorothy K; Parascandola, Mark; Shields, Peter G; Connolly, Gregory N

    2009-12-01

    Internal tobacco industry documents and the mainstream literature are reviewed to identify methods and measures for evaluating tobacco consumer response. The review aims to outline areas in which established methods exist, identify gaps in current methods for assessing consumer response, and consider how these methods might be applied to evaluate potentially reduced exposure tobacco products and new products. Internal industry research reviewed included published articles, manuscript drafts, presentations, protocols, and instruments relating to consumer response measures were identified and analyzed. Peer-reviewed research was identified using PubMed and Scopus. Industry research on consumer response focuses on product development and marketing. To develop and refine new products, the tobacco industry has developed notable strategies for assessing consumers' sensory and subjective responses to product design characteristics. Independent research is often conducted to gauge the likelihood of future product adoption by measuring consumers' risk perceptions, responses to product, and product acceptability. A model that conceptualizes consumer response as comprising the separate, but interacting, domains of product perceptions and response to product is outlined. Industry and independent research supports the dual domain model and provides a wide range of methods for assessment of the construct components of consumer response. Further research is needed to validate consumer response constructs, determine the relationship between consumer response and tobacco user behavior, and improve reliability of consumer response measures. Scientifically rigorous consumer response assessment methods will provide a needed empirical basis for future regulation of potentially reduced-exposure tobacco products and new products, to counteract tobacco industry influence on consumers, and enhance the public health.

  17. Health systems research training enhances workplace research skills: a qualitative evaluation.

    Science.gov (United States)

    Adams, Jolene; Schaffer, Angela; Lewin, Simon; Zwarenstein, Merrick; van der Walt, Hester

    2003-01-01

    In-service education is a widely used means of enhancing the skills of health service providers, for example, in undertaking research. However, the transfer of skills acquired during an education course to the workplace is seldom evaluated. The objectives of this study were to assess learner, teacher, and health service manager perceptions of the usefulness, in the work setting, of skills taught on a health systems research education course in South Africa and to assess the extent to which the course stimulated awareness and development of health systems research in the work setting. The education course was evaluated using a qualitative approach. Respondents were selected for interview using purposive sampling. Interviews were conducted with 39 respondents, including all of the major stakeholders. The interviews lasted between 20 and 60 minutes and were conducted either face to face or over the telephone. Thematic analysis was applied to the data, and key themes were identified. The course demystified health systems research and stimulated interest in reading and applying research findings. The course also changed participants' attitudes to routine data collection and was reported to have facilitated the application of informal research or problem-solving methods to everyday work situations. However, inadequate support within the workplace was a significant obstacle to applying the skills learned. A 2-week intensive, experiential course in health systems research methods can provide a mechanism for introducing basic research skills to a wide range of learners. Qualitative evaluation is a useful approach for assessing the impacts of education courses.

  18. Allied health research positions: a qualitative evaluation of their impact.

    Science.gov (United States)

    Wenke, Rachel J; Ward, Elizabeth C; Hickman, Ingrid; Hulcombe, Julie; Phillips, Rachel; Mickan, Sharon

    2017-02-06

    Research positions embedded within healthcare settings have been identified as an enabler to allied health professional (AHP) research capacity; however, there is currently limited research formally evaluating their impact. In 2008, a Health Practitioner industrial agreement funded a research capacity building initiative within Queensland Health, Australia, which included 15 new allied health research positions. The present project used a qualitative and realist approach to explore the impact of these research positions, as well as the mechanisms which facilitated or hindered their success within their respective organisations. Forty-four AHP employees from six governmental health services in Queensland, Australia, participated in the study. Individual interviews were undertaken, with individuals in research positions (n = 8) and their reporting line managers (n = 8). Four stakeholder focus groups were also conducted with clinicians, team leaders and professional heads who had engaged with the research positions. Nine key outcomes of the research positions were identified across individual, team/service and organisational/community levels. These outcomes included clinician skill development, increased research activity, clinical and service changes, increased research outputs and collaborations, enhanced research and workplace culture, improved profile of allied health, development of research infrastructure, and professional development of individuals in the research positions. Different mechanisms that influenced these outcomes were identified. These mechanisms were grouped by those related to the (1) research position itself, (2) organisational factors and (3) implementation factors. The present findings highlight the potential value of the research positions for individuals, teams and clinical services across different governmental healthcare services, and demonstrate the impact of the roles on building the internal and external profile of allied health

  19. Product Evaluation Task Force Phase Two report for CAGR graphite

    International Nuclear Information System (INIS)

    Francis, A.J.; Davies, A.

    1991-01-01

    It has been proposed that all Intermediate Level Wastes arising at Sellafield should be encapsulated prior to ultimate disposal. The Product Evaluation Task Force (PETF) was set up to investigate possible encapsulants and to produce an adequate data base to justify the preferred matrices. This report details the work carried out under Phase 2 of the Product Evaluation Task Force programme, on CAGR graphite. Three possible types of encapsulants for CAGR graphites:-Inorganic cements, Polymer cements and Polymers are evaluated using the Kepner Tregoe decision analysis technique. This technique provides a methodology for scoring and ranking alternative options and evaluating any risks associated with an option. The analysis shows that for all four stages of waste management operations ie Storage, Transport, handling and emplacement, Disposal and Process, cement matrices are considerably superior to other potential matrices. A matrix, consisting of three parts Blast Furnace Slag (BFS) to one part Ordinary Portland Cement (OPC) is recommended as the preferred matrix for Phase 3 studies on CAGR graphite. (author)

  20. An Evaluation of a Fission Product Inventory for CANDU Fuels

    International Nuclear Information System (INIS)

    Jung, Jong Yeob; Park, Joo Hwan

    2007-01-01

    Fission products are released by two processes when a single channel accident occurs. One is a 'prompt release' and the other is a 'delayed release'. Prompt release assumes that the gap inventory of the fuel elements is released by a fuel element failure at the time of an accident. Delayed release assumes that the inventories within the grain or at the grain boundary are released after a accident due to a diffusion through grains, an oxidation of the fuel and an interaction between the fuel and the Zircaloy sheath. Therefore, the calculation of a fission product inventory and its distribution in a fuel during a normal operating is the starting point for the assessment of a fission product release for single channel accidents. In this report, the fission product inventories and their distributions within s fuel under a normal operating condition are evaluated for three types of CANDU fuels such as the 37 element fuel, CANFLEX-NU and CANFLEX-RU fuel bundles in the 'limiting channel'. To accomplish the above mentioned purposes, the basic power histories for each type of CANDU fuel were produced and the fission product inventories were calculated by using the ELESTRES code