Space suit bioenergetics: framework and analysis of unsuited and suited activity.

Science.gov (United States)

Carr, Christopher E; Newman, Dava J

2007-11-01

Metabolic costs limit the duration and intensity of extravehicular activity (EVA), an essential component of future human missions to the Moon and Mars. Energetics Framework: We present a framework for comparison of energetics data across and between studies. This framework, applied to locomotion, differentiates between muscle efficiency and energy recovery, two concepts often confused in the literature. The human run-walk transition in Earth gravity occurs at the point for which energy recovery is approximately the same for walking and running, suggesting a possible role for recovery in gait transitions. Muscular Energetics: Muscle physiology limits the overall efficiency by which chemical energy is converted through metabolism to useful work. Unsuited Locomotion: Walking and running use different methods of energy storage and release. These differences contribute to the relative changes in the metabolic cost of walking and running as gravity is varied, with the metabolic cost of locomoting at a given velocity changing in proportion to gravity for running and less than in proportion for walking. Space Suits: Major factors affecting the energetic cost of suited movement include suit pressurization, gravity, velocity, surface slope, and space suit configuration. Apollo lunar surface EVA traverse metabolic rates, while unexpectedly low, were higher than other activity categories. The Lunar Roving Vehicle facilitated even lower metabolic rates, thus longer duration EVAs. Muscles and tendons act like springs during running; similarly, longitudinal pressure forces in gas pressure space suits allow spring-like storage and release of energy when suits are self-supporting.

Radiation Protection Studies of International Space Station Extravehicular Activity Space Suits

Science.gov (United States)

Cucinotta, Francis A. (Editor); Shavers, Mark R. (Editor); Saganti, Premkumar B. (Editor); Miller, Jack (Editor)

2003-01-01

This publication describes recent investigations that evaluate radiation shielding characteristics of NASA's and the Russian Space Agency's space suits. The introduction describes the suits and presents goals of several experiments performed with them. The first chapter provides background information about the dynamic radiation environment experienced at ISS and summarized radiation health and protection requirements for activities in low Earth orbit. Supporting studies report the development and application of a computer model of the EMU space suit and the difficulty of shielding EVA crewmembers from high-energy reentrant electrons, a previously unevaluated component of the space radiation environment. Chapters 2 through 6 describe experiments that evaluate the space suits' radiation shielding characteristics. Chapter 7 describes a study of the potential radiological health impact on EVA crewmembers of two virtually unexamined environmental sources of high-energy electrons-reentrant trapped electrons and atmospheric albedo or "splash" electrons. The radiological consequences of those sources have not been evaluated previously and, under closer scrutiny. A detailed computational model of the shielding distribution provided by components of the NASA astronauts' EMU is being developed for exposure evaluation studies. The model is introduced in Chapters 8 and 9 and used in Chapter 10 to investigate how trapped particle anisotropy impacts female organ doses during EVA. Chapter 11 presents a review of issues related to estimating skin cancer risk form space radiation. The final chapter contains conclusions about the protective qualities of the suit brought to light form these studies, as well as recommendations for future operational radiation protection.

Evaluation of an Anthropometric Human Body Model for Simulated EVA Task Assessment

Science.gov (United States)

Etter, Brad

1996-01-01

One of the more mission-critical tasks performed in space is extravehicular activity (EVA) which requires the astronaut to be external to the station or spacecraft, and subsequently at risk from the many threats posed by space. These threats include, but are not limited to: no significant atmosphere, harmful electromagnetic radiation, micrometeoroids, and space debris. To protect the astronaut from this environment, a special EVA suit is worn which is designed to maintain a sustainable atmosphere (at 1/3 atmosphere) and provide protection against the hazards of space. While the EVA suit serves these functions well, it does impose limitations on the astronaut as a consequence of the safety it provides. Since the astronaut is in a virtual vacuum, any atmospheric pressure inside the suit serves to pressurize the suit and restricts mobility of flexible joints (such as fabric). Although some of the EVA suit joints are fixed, rotary-style joints, most of the mobility is achieved by the simple flexibility of the fabric. There are multiple layers of fabric, each of which serves a special purpose in the safety of the astronaut. These multiple layers add to the restriction of motion the astronaut experiences in the space environment. Ground-based testing is implemented to evaluate the capability of EVA-suited astronauts to perform the various tasks in space. In addition to the restriction of motion imposed by the EVA suit, most EVA activity is performed in a micro-gravity (weight less) environment. To simulate weightlessness EVA-suited testing is performed in a neutral buoyancy simulator (NBS). The NBS is composed of a large container of water (pool) in which a weightless environment can be simulated. A subject is normally buoyant in the pressurized suit; however he/she can be made neutrally buoyant with the addition of weights. In addition, most objects the astronaut must interface with in the NBS sink in water and flotation must be added to render them "weightless". The

A Human Machine Interface for EVA

Science.gov (United States)

Hartmann, L.

EVA astronauts work in a challenging environment that includes high rate of muscle fatigue, haptic and proprioception impairment, lack of dexterity and interaction with robotic equipment. Currently they are heavily dependent on support from on-board crew and ground station staff for information and robotics operation. They are limited to the operation of simple controls on the suit exterior and external robot controls that are difficult to operate because of the heavy gloves that are part of the EVA suit. A wearable human machine interface (HMI) inside the suit provides a powerful alternative for robot teleoperation, procedure checklist access, generic equipment operation via virtual control panels and general information retrieval and presentation. The HMI proposed here includes speech input and output, a simple 6 degree of freedom (dof) pointing device and a heads up display (HUD). The essential characteristic of this interface is that it offers an alternative to the standard keyboard and mouse interface of a desktop computer. The astronaut's speech is used as input to command mode changes, execute arbitrary computer commands and generate text. The HMI can respond with speech also in order to confirm selections, provide status and feedback and present text output. A candidate 6 dof pointing device is Measurand's Shapetape, a flexible "tape" substrate to which is attached an optic fiber with embedded sensors. Measurement of the modulation of the light passing through the fiber can be used to compute the shape of the tape and, in particular, the position and orientation of the end of the Shapetape. It can be used to provide any kind of 3d geometric information including robot teleoperation control. The HUD can overlay graphical information onto the astronaut's visual field including robot joint torques, end effector configuration, procedure checklists and virtual control panels. With suitable tracking information about the position and orientation of the EVA suit

EVA Human Health and Performance Benchmarking Study Overview and Development of a Microgravity Protocol

Science.gov (United States)

Norcross, Jason; Jarvis, Sarah; Bekdash, Omar; Cupples, Scott; Abercromby, Andrew

2017-01-01

The primary objective of this study is to develop a protocol to reliably characterize human health and performance metrics for individuals working inside various EVA suits under realistic spaceflight conditions. Expected results and methodologies developed during this study will provide the baseline benchmarking data and protocols with which future EVA suits and suit configurations (e.g., varied pressure, mass, center of gravity [CG]) and different test subject populations (e.g., deconditioned crewmembers) may be reliably assessed and compared. Results may also be used, in conjunction with subsequent testing, to inform fitness-for-duty standards, as well as design requirements and operations concepts for future EVA suits and other exploration systems.

Crosscutting Development- EVA Tools and Geology Sample Acquisition

Science.gov (United States)

2011-01-01

Exploration to all destinations has at one time or another involved the acquisition and return of samples and context data. Gathered at the summit of the highest mountain, the floor of the deepest sea, or the ice of a polar surface, samples and their value (both scientific and symbolic) have been a mainstay of Earthly exploration. In manned spaceflight exploration, the gathering of samples and their contextual information has continued. With the extension of collecting activities to spaceflight destinations comes the need for geology tools and equipment uniquely designed for use by suited crew members in radically different environments from conventional field geology. Beginning with the first Apollo Lunar Surface Extravehicular Activity (EVA), EVA Geology Tools were successfully used to enable the exploration and scientific sample gathering objectives of the lunar crew members. These early designs were a step in the evolution of Field Geology equipment, and the evolution continues today. Contemporary efforts seek to build upon and extend the knowledge gained in not only the Apollo program but a wealth of terrestrial field geology methods and hardware that have continued to evolve since the last lunar surface EVA. This paper is presented with intentional focus on documenting the continuing evolution and growing body of knowledge for both engineering and science team members seeking to further the development of EVA Geology. Recent engineering development and field testing efforts of EVA Geology equipment for surface EVA applications are presented, including the 2010 Desert Research and Technology Studies (Desert RATs) field trial. An executive summary of findings will also be presented, detailing efforts recommended for exotic sample acquisition and pre-return curation development regardless of planetary or microgravity destination.

Simplified Abrasion Test Methodology for Candidate EVA Glove Lay-Ups

Science.gov (United States)

Rabel, Emily; Aitchison, Lindsay

2015-01-01

During the Apollo Program, space suit outer-layer fabrics were badly abraded after performing just a few extravehicular activities (EVAs). For example, the Apollo 12 commander reported abrasive wear on the boots that penetrated the outer-layer fabric into the thermal protection layers after less than 8 hrs of surface operations. Current plans for the exploration planetary space suits require the space suits to support hundreds of hours of EVA on a lunar or Martian surface, creating a challenge for space suit designers to utilize materials advances made over the last 40 years and improve on the space suit fabrics used in the Apollo Program. Over the past 25 years the NASA Johnson Space Center Crew and Thermal Systems Division has focused on tumble testing as means of simulating wear on the outer layer of the space suit fabric. Most recently, in 2009, testing was performed on 4 different candidate outer layers to gather baseline data for future use in design of planetary space suit outer layers. In support of the High Performance EVA Glove Element of the Next Generation Life Support Project, testing a new configuration was recently attempted in which require 10% of the fabric per replicate of that need in 2009. The smaller fabric samples allowed for reduced per sample cost and flexibility to test small samples from manufacturers without the overhead to have a production run completed. Data collected from this iteration was compared to that taken in 2009 to validate the new test method. In addition the method also evaluated the fabrics and fabric layups used in a prototype thermal micrometeoroid garment (TMG) developed for EVA gloves under the NASA High Performance EVA Glove Project. This paper provides a review of previous abrasion studies on space suit fabrics, details methodologies used for abrasion testing in this particular study, results of the validation study, and results of the TMG testing.

Collaborative Human Engineering Work in Space Exploration Extravehicular Activities (EVA)

Science.gov (United States)

DeSantis, Lena; Whitmore, Mihriban

2007-01-01

A viewgraph presentation on extravehicular activities in space exploration in collaboration with other NASA centers, industries, and universities is shown. The topics include: 1) Concept of Operations for Future EVA activities; 2) Desert Research and Technology Studies (RATS); 3) Advanced EVA Walkback Test; 4) Walkback Subjective Results; 5) Integrated Suit Test 1; 6) Portable Life Support Subsystem (PLSS); 7) Flex PLSS Design Process; and 8) EVA Information System; 9)

Creating a Lunar EVA Work Envelope

Science.gov (United States)

Griffin, Brand N.; Howard, Robert; Rajulu, Sudhakar; Smitherman, David

2009-01-01

A work envelope has been defined for weightless Extravehicular Activity (EVA) based on the Space Shuttle Extravehicular Mobility Unit (EMU), but there is no equivalent for planetary operations. The weightless work envelope is essential for planning all EVA tasks because it determines the location of removable parts, making sure they are within reach and visibility of the suited crew member. In addition, using the envelope positions the structural hard points for foot restraints that allow placing both hands on the job and provides a load path for reacting forces. EVA operations are always constrained by time. Tasks are carefully planned to ensure the crew has enough breathing oxygen, cooling water, and battery power. Planning first involves computers using a virtual work envelope to model tasks, next suited crew members in a simulated environment refine the tasks. For weightless operations, this process is well developed, but planetary EVA is different and no work envelope has been defined. The primary difference between weightless and planetary work envelopes is gravity. It influences anthropometry, horizontal and vertical mobility, and reaction load paths and introduces effort into doing "overhead" work. Additionally, the use of spacesuits other than the EMU, and their impacts on range of motion, must be taken into account. This paper presents the analysis leading to a concept for a planetary EVA work envelope with emphasis on lunar operations. There is some urgency in creating this concept because NASA has begun building and testing development hardware for the lunar surface, including rovers, habitats and cargo off-loading equipment. Just as with microgravity operations, a lunar EVA work envelope is needed to guide designers in the formative stages of the program with the objective of avoiding difficult and costly rework.

Biosensors for EVA: Muscle Oxygen and pH During Walking, Running and Simulated Reduced Gravity

Science.gov (United States)

Lee, S. M. C.; Ellerby, G.; Scott, P.; Stroud, L.; Norcross, J.; Pesholov, B.; Zou, F.; Gernhardt, M.; Soller, B.

2009-01-01

During lunar excursions in the EVA suit, real-time measurement of metabolic rate is required to manage consumables and guide activities to ensure safe return to the base. Metabolic rate, or oxygen consumption (VO2), is normally measured from pulmonary parameters but cannot be determined with standard techniques in the oxygen-rich environment of a spacesuit. Our group developed novel near infrared spectroscopic (NIRS) methods to calculate muscle oxygen saturation (SmO2), hematocrit, and pH, and we recently demonstrated that we can use our NIRS sensor to measure VO2 on the leg during cycling. Our NSBRI-funded project is looking to extend this methodology to examine activities which more appropriately represent EVA activities, such as walking and running and to better understand factors that determine the metabolic cost of exercise in both normal and lunar gravity. Our 4 year project specifically addresses risk: ExMC 4.18: Lack of adequate biomedical monitoring capability for Constellation EVA Suits and EPSP risk: Risk of compromised EVA performance and crew health due to inadequate EVA suit systems.

Suited versus unsuited analog astronaut performance using the Aouda.X space suit simulator: the DELTA experiment of MARS2013.

Science.gov (United States)

Soucek, Alexander; Ostkamp, Lutz; Paternesi, Roberta

2015-04-01

Space suit simulators are used for extravehicular activities (EVAs) during Mars analog missions. Flight planning and EVA productivity require accurate time estimates of activities to be performed with such simulators, such as experiment execution or traverse walking. We present a benchmarking methodology for the Aouda.X space suit simulator of the Austrian Space Forum. By measuring and comparing the times needed to perform a set of 10 test activities with and without Aouda.X, an average time delay was derived in the form of a multiplicative factor. This statistical value (a second-over-second time ratio) is 1.30 and shows that operations in Aouda.X take on average a third longer than the same operations without the suit. We also show that activities predominantly requiring fine motor skills are associated with larger time delays (between 1.17 and 1.59) than those requiring short-distance locomotion or short-term muscle strain (between 1.10 and 1.16). The results of the DELTA experiment performed during the MARS2013 field mission increase analog mission planning reliability and thus EVA efficiency and productivity when using Aouda.X.

Instrumented Suit Hard Upper Torso (HUT) for Ergonomic Assessment

Data.gov (United States)

National Aeronautics and Space Administration — It is well known that the EVA suit (EMU) has the potential to cause crew injury and decreased performance. Engineering data on the suit interaction of the human...

Development of a Fan for Future Space Suit Applications

Science.gov (United States)

Paul. Heather L.; Converse, David; Dionne, Steven; Moser, Jeff

2010-01-01

NASA's next generation space suit system will place new demands on the fan used to circulate breathing gas through the ventilation loop of the portable life support system. Long duration missions with frequent extravehicular activities (EVAs), the requirement for significant increases in reliability and durability, and a mission profile that imposes strict limits on weight, volume and power create the basis for a set of requirements that demand more performance than is available from existing fan designs. This paper describes the development of a new fan to meet these needs. A centrifugal fan was designed with a normal operating speed of approximately 39,400 rpm to meet the ventilation flow requirements while also meeting the aggressive minimal packaging, weight and power requirements. The prototype fan also operates at 56,000 rpm to satisfy a second operating condition associated with a single fan providing ventilation flow to two spacesuits connected in series. This fan incorporates a novel nonmetallic "can" to keep the oxygen flow separate from the motor electronics, thus eliminating ignition potential. The nonmetallic can enables a small package size and low power consumption. To keep cost and schedule within project bounds a commercial motor controller was used. The fan design has been detailed and implemented using materials and approaches selected to address anticipated mission needs. Test data is presented to show how this fan performs relative to anticipated ventilation requirements for the EVA portable life support system. Additionally, data is presented to show tolerance to anticipated environmental factors such as acoustics, shock, and vibration. Recommendations for forward work to progress the technology readiness level and prepare the fan for the next EVA space suit system are also discussed.

The European space suit, a design for productivity and crew safety

Science.gov (United States)

Skoog, A. Ingemar; Berthier, S.; Ollivier, Y.

In order to fulfil the two major mission objectives, i.e. support planned and unplanned external servicing of the COLUMBUS FFL and support the HERMES vehicle for safety critical operations and emergencies, the European Space Suit System baseline configuration incorporates a number of design features, which shall enhance the productivity and the crew safety of EVA astronauts. The work in EVA is today - and will be for several years - a manual work. Consequently, to improve productivity, the first challenge is to design a suit enclosure which minimizes movement restrictions and crew fatigue. It is covered by the "ergonomic" aspect of the suit design. Furthermore, it is also necessary to help the EVA crewmember in his work, by giving him the right information at the right time. Many solutions exist in this field of Man-Machine Interface, from a very simple system, based on cuff check lists, up to advanced systems, including Head-Up Displays. The design concept for improved productivity encompasses following features: • easy donning/doffing thru rear entry, • suit ergonomy optimisation, • display of operational information in alpha-numerical and graphical from, and • voice processing for operations and safety critical information. Concerning crew safety the major design features are: • a lower R-factor for emergency EVA operations thru incressed suit pressure, • zero prebreath conditions for normal operations, • visual and voice processing of all safety critical functions, and • an autonomous life support system to permit unrestricted operations around HERMES and the CFFL. The paper analyses crew safety and productivity criteria and describes how these features are being built into the design of the European Space Suit System.

Coupled Human-Space Suit Mobility Studies

Data.gov (United States)

National Aeronautics and Space Administration — Current EVA mobility studies only allow for comparisons of how the suit moves when actuated by a human and how the human moves when unsuited. There are now new...

EVA Physiology, Systems and Performance [EPSP] Project

Science.gov (United States)

Gernhardt, Michael L.

2010-01-01

This viewgraph presentation gives a general overview of the biomedical and technological challenges of Extravehicular Activity (EVA). The topics covered include: 1) Prebreathe Protocols; 2) Lunar Suit Testing and Development; and 3) Lunar Electric Rover and Exploration Operations Concepts.

Recommendations concerning models and parameters best suited to breeder reactor environmental radiological assessments

International Nuclear Information System (INIS)

Miller, C.W.; Baes, C.F. III; Dunning, D.E. Jr.

1980-05-01

Recommendations are presented concerning the models and parameters best suited for assessing the impact of radionuclide releases to the environment by breeder reactor facilities. These recommendations are based on the model and parameter evaluations performed during this project to date. Seven different areas are covered in separate sections

High Performance EVA Glove Collaboration: Glove Injury Data Mining Effort

Science.gov (United States)

Reid, C. R.; Benosn, E.; England, S.; Norcross, J. R.; McFarland, S. M.; Rajulu, S.

2014-01-01

Human hands play a significant role during extravehicular activity (EVA) missions and Neutral Buoyancy Lab (NBL) training events, as they are needed for translating and performing tasks in the weightless environment. It is because of this high frequency usage that hand- and arm-related injuries and discomfort are known to occur during training in the NBL and while conducting EVAs. Hand-related injuries and discomforts have been occurring to crewmembers since the days of Apollo. While there have been numerous engineering changes to the glove design, hand-related issues still persist. The primary objectives of this study are therefore to: 1) document all known EVA glove-related injuries and the circumstances of these incidents, 2) determine likely risk factors, and 3) recommend ergonomic mitigations or design strategies that can be implemented in the current and future glove designs. METHODS: The investigator team conducted an initial set of literature reviews, data mining of Lifetime Surveillance of Astronaut Health (LSAH) databases, and data distribution analyses to understand the ergonomic issues related to glove-related injuries and discomforts. The investigation focused on the injuries and discomforts of U.S. crewmembers who had worn pressurized suits and experienced glove-related incidents during the 1980 to 2010 time frame, either during training or on-orbit EVA. In addition to data mining of the LSAH database, the other objective of the study was to find complimentary sources of information such as training experience, EVA experience, suit-related sizing data, and hand-arm anthropometric data to be tied to the injury data from LSAH. RESULTS: Past studies indicated that the hand was the most frequently injured part of the body during both EVA and NBL training. This study effort thus focused primarily on crew training data in the NBL between 2002 and 2010. Of the 87 recorded training incidents, 19 occurred to women and 68 to men. While crew ages ranged from

Integrated Suit Test 1 - A Study to Evaluate Effects of Suit Weight, Pressure, and Kinematics on Human Performance during Lunar Ambulation

Science.gov (United States)

Gernhardt, Michael L.; Norcross, Jason; Vos, Jessica R.

2008-01-01

In an effort to design the next generation Lunar suit, NASA has initiated a series of tests aimed at understanding the human physiological and biomechanical affects of space suits under a variety of conditions. The first of these tests was the EVA Walkback Test (ICES 2007-01-3133). NASA-JSC assembled a multi-disciplinary team to conduct the second test of the series, titled Integrated Suit Test 1 (IST-1), from March 6 through July 24, 2007. Similar to the Walkback Test, this study was performed with the Mark III (MKIII) EVA Technology Demonstrator suit, a treadmill, and the Partial Gravity Simulator in the Space Vehicle Mock-Up Facility at Johnson Space Center. The data collected for IST-1 included metabolic rates, ground reaction forces, biomechanics, and subjective workload and controllability feedback on both suited and unsuited (shirt-sleeve) astronaut subjects. For IST-1 the center of gravity was controlled to a nearly perfect position while the weight, pressure and biomechanics (waist locked vs. unlocked) were varied individually to evaluate the effects of each on the ability to perform level (0 degree incline) ambulation in simulated Lunar gravity. The detailed test methodology and preliminary key findings of IST-1 are summarized in this report.

Fuel Oxidizer Reaction Products (FORP) Contamination of Service Module (SM) and Release of N-nitrosodimethylamine(NDMA)in a Humid Environment from Crew EVA Suits Contaminated with FORP

Science.gov (United States)

Schmidl, William; Mikatarian, Ron; Lam, Chiu-Wing; West, Bil; Buchanan, Vanessa; Dee, Louis; Baker, David; Koontz, Steve

2004-01-01

The Service Module (SM) is an element of the Russian Segment of the International Space Station (ISS). One of the functions of the SM is to provide attitude control for the ISS using thrusters when the U.S. Control Moment Gyros (CMG's) must be desaturated. Prior to an Extravehicular Activity (EVA) on the Russian Segment, the Docking Compartment (DC1) is depressurized, as it is used as an airlock. When the DC1 is depressurized, the CMG's margin of momentum is insufficient and the SM attitude control thrusters need to fire to desaturate the CMG's. SM roll thruster firings induce contamination onto adjacent surfaces with Fuel Oxidizer Reaction Products (FORP). FORP is composed of both volatile and non-volatile components. One of the components of FORP is the potent carcinogen N-nitrosdimethylamine (NDMA). Since the EVA crewmembers often enter the area surrounding the thrusters for tasks on the aft end of the SM and when translating to other areas of the Russian Segment, the presence of FORP is a concern. This paper will discuss FORP contamination of the SM surfaces, the release of NDMA in a humid environment from crew EVA suits, if they happen to be contaminated with FORP, and the toxicological risk associated with the NDMA release.

Exploration Space Suit Architecture and Destination Environmental-Based Technology Development

Science.gov (United States)

Hill, Terry R.; McFarland, Shane M.; Korona, F. Adam

2013-01-01

This paper continues forward where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars left off in the development of a space suit architecture that is modular in design and could be reconfigured prior to launch or during any given mission depending on the tasks or destination. This space suit system architecture and technologies required based on human exploration (EVA) destinations will be discussed, and how these systems should evolve to meet the future exploration EVA needs of the US human space flight program. A series of exercises and analyses provided a strong indication that the Constellation Program space suit architecture, with its maximum reuse of technology and functionality across a range of mission profiles and destinations, is postured to provide a viable solution for future space exploration missions. The destination environmental analysis demonstrates that the modular architecture approach could provide the lowest mass and mission cost for the protection of the crew, given any human mission outside of low-Earth orbit. Additionally, some of the high-level trades presented here provide a review of the environmental and nonenvironmental design drivers that will become increasingly important as humans venture farther from Earth. The presentation of destination environmental data demonstrates a logical clustering of destination design environments that allows a focused approach to technology prioritization, development, and design that will maximize the return on investment, largely independent of any particular design reference mission.

Cosmonaut Sergei Krikalev receives assistance from suit technician

Science.gov (United States)

1994-01-01

Sergei Krikalev, alternative mission specialist for STS-63, gets help from Dawn Mays, a Boeing suit technician. The cosmonaut was about to participate in a training session at JSC's Weightless Environment Training Facility (WETF). Wearing the training version of the extravehicular mobility unit (EMU) space suit, weighted to allow neutral buoyancy in the 25 feet deep WETF pool, Krikalev minutes later was underwater simulating a contingency spacewalk, or extravehicular activity (EVA).

Electrostatic Discharge Issues in International Space Station Program EVAs

Science.gov (United States)

Bacon, John B.

2009-01-01

EVA activity in the ISS program encounters several dangerous ESD conditions. The ISS program has been aggressive for many years to find ways to mitigate or to eliminate the associated risks. Investments have included: (1) Major mods to EVA tools, suit connectors & analytical tools (2) Floating Potential Measurement Unit (3) Plasma Contactor Units (4) Certification of new ISS flight attitudes (5) Teraflops of computation (6) Thousands of hours of work by scores of specialists (7) Monthly management attention at the highest program levels. The risks are now mitigated to a level that is orders of magnitude safer than prior operations

MRI-guided stereotactic neurosurgical procedures in a diagnostic MRI suite: Background and safe practice recommendations.

Science.gov (United States)

Larson, Paul S; Willie, Jon T; Vadivelu, Sudhakar; Azmi-Ghadimi, Hooman; Nichols, Amy; Fauerbach, Loretta Litz; Johnson, Helen Boehm; Graham, Denise

2017-07-01

The development of navigation technology facilitating MRI-guided stereotactic neurosurgery has enabled neurosurgeons to perform a variety of procedures ranging from deep brain stimulation to laser ablation entirely within an intraoperative or diagnostic MRI suite while having real-time visualization of brain anatomy. Prior to this technology, some of these procedures required multisite workflow patterns that presented significant risk to the patient during transport. For those facilities with access to this technology, safe practice guidelines exist only for procedures performed within an intraoperative MRI. There are currently no safe practice guidelines or parameters available for facilities looking to integrate this technology into practice in conventional MRI suites. Performing neurosurgical procedures in a diagnostic MRI suite does require precautionary measures. The relative novelty of technology and workflows for direct MRI-guided procedures requires consideration of safe practice recommendations, including those pertaining to infection control and magnet safety issues. This article proposes a framework of safe practice recommendations designed for assessing readiness and optimization of MRI-guided neurosurgical interventions in the diagnostic MRI suite in an effort to mitigate patient risk. The framework is based on existing clinical evidence, recommendations, and guidelines related to infection control and prevention, health care-associated infections, and magnet safety, as well as the clinical and practical experience of neurosurgeons utilizing this technology. © 2017 American Society for Healthcare Risk Management of the American Hospital Association.

A method of evaluating efficiency during space-suited work in a neutral buoyancy environment

Science.gov (United States)

Greenisen, Michael C.; West, Phillip; Newton, Frederick K.; Gilbert, John H.; Squires, William G.

1991-01-01

The purpose was to investigate efficiency as related to the work transmission and the metabolic cost of various extravehicular activity (EVA) tasks during simulated microgravity (whole body water immersion) using three space suits. Two new prototype space station suits, AX-5 and MKIII, are pressurized at 57.2 kPa and were tested concurrently with the operationally used 29.6 kPa shuttle suit. Four male astronauts were asked to perform a fatigue trial on four upper extremity exercises during which metabolic rate and work output were measured and efficiency was calculated in each suit. The activities were selected to simulate actual EVA tasks. The test article was an underwater dynamometry system to which the astronauts were secured by foot restraints. All metabolic data was acquired, calculated, and stored using a computerized indirect calorimetry system connected to the suit ventilation/gas supply control console. During the efficiency testing, steady state metabolic rate could be evaluated as well as work transmitted to the dynamometer. Mechanical efficiency could then be calculated for each astronaut in each suit performing each movement.

Evidence Report: Risk of Injury and Compromised Performance due to EVA Operations

Science.gov (United States)

Chappell, Steven P.; Norcross, Jason R.; Abercromby, Andrew F. J.; Bekdash, Omar S.; Benson, Elizabeth A.; Jarvis, Sarah L.; Conkin, Johnny; Gernhardt, Michael L.; House, Nancy; Jadwick, Jennifer;

Effective Teamwork: The EVA NBL Experience

Science.gov (United States)

Crocker, Lori

2007-01-01

This viewgraph presentation reviews the experience of improving the operation of the ExtraVehiclar Activity (EVA) Neutral Buoyancy Laboratory as a team of NASA employees and contractors. It reviews specific recommendations to use in turning a struggling organization around as a NASA/contractor team

Ultraviolet Testing of Space Suit Materials for Mars

Science.gov (United States)

Larson, Kristine; Fries, Marc

2017-01-01

Human missions to Mars may require radical changes in the approach to extra-vehicular (EVA) suit design. A major challenge is the balance of building a suit robust enough to complete multiple EVAs under intense ultraviolet (UV) light exposure without losing mechanical strength or compromising the suit's mobility. To study how the materials degrade on Mars in-situ, the Jet Propulsion Laboratory (JPL) invited the Advanced Space Suit team at NASA's Johnson Space Center (JSC) to place space suit materials on the Scanning Habitable Environments with Raman & Luminescence for Organics and Chemicals (SHERLOC) instrument's calibration target of the Mars 2020 rover. In order to select materials for the rover and understand the effects from Mars equivalent UV exposure, JSC conducted ground testing on both current and new space suit materials when exposed to 2500 hours of Mars mission equivalent UV. To complete this testing, JSC partnered with NASA's Marshall Space Flight Center to utilize their UV vacuum chambers. Materials tested were Orthofabric, polycarbonate, Teflon, Dacron, Vectran, spectra, bladder, nGimat coated Teflon, and nGimat coated Orthofabric. All samples were measured for mass, tensile strength, and chemical composition before and after radiation. Mass loss was insignificant (less than 0.5%) among the materials. Most materials loss tensile strength after radiation and became more brittle with a loss of elongation. Changes in chemical composition were seen in all radiated materials through Spectral Analysis. Results from this testing helped select the materials that will fly on the Mars 2020 rover. In addition, JSC can use this data to create a correlation to the chemical changes after radiation-which is what the rover will send back while on Mars-to the mechanical changes, such as tensile strength.

EVA Wiki - Transforming Knowledge Management for EVA Flight Controllers and Instructors

Science.gov (United States)

Johnston, Stephanie S.; Alpert, Brian K.; Montalvo, Edwin James; Welsh, Lawrence Daren; Wray, Scott; Mavridis, Costa

2016-01-01

The EVA Wiki was recently implemented as the primary knowledge database to retain critical knowledge and skills in the EVA Operations group at NASA's Johnson Space Center by ensuring that information is recorded in a common, easy to search repository. Prior to the EVA Wiki, information required for EVA flight controllers and instructors was scattered across different sources, including multiple file share directories, SharePoint, individual computers, and paper archives. Many documents were outdated, and data was often difficult to find and distribute. In 2011, a team recognized that these knowledge management problems could be solved by creating an EVA Wiki using MediaWiki, a free and open-source software developed by the Wikimedia Foundation. The EVA Wiki developed into an EVA-specific Wikipedia on an internal NASA server. While the technical implementation of the wiki had many challenges, one of the biggest hurdles came from a cultural shift. Like many enterprise organizations, the EVA Operations group was accustomed to hierarchical data structures and individually-owned documents. Instead of sorting files into various folders, the wiki searches content. Rather than having a single document owner, the wiki harmonized the efforts of many contributors and established an automated revision controlled system. As the group adapted to the wiki, the usefulness of this single portal for information became apparent. It transformed into a useful data mining tool for EVA flight controllers and instructors, as well as hundreds of others that support EVA. Program managers, engineers, astronauts, flight directors, and flight controllers in differing disciplines now have an easier-to-use, searchable system to find EVA data. This paper presents the benefits the EVA Wiki has brought to NASA's EVA community, as well as the cultural challenges it had to overcome.

EVA Wiki - Transforming Knowledge Management for EVA Flight Controllers and Instructors

Science.gov (United States)

Johnston, Stephanie

2016-01-01

The EVA (Extravehicular Activity) Wiki was recently implemented as the primary knowledge database to retain critical knowledge and skills in the EVA Operations group at NASA's Johnson Space Center by ensuring that information is recorded in a common, searchable repository. Prior to the EVA Wiki, information required for EVA flight controllers and instructors was scattered across different sources, including multiple file share directories, SharePoint, individual computers, and paper archives. Many documents were outdated, and data was often difficult to find and distribute. In 2011, a team recognized that these knowledge management problems could be solved by creating an EVA Wiki using MediaWiki, a free and open-source software developed by the Wikimedia Foundation. The EVA Wiki developed into an EVA-specific Wikipedia on an internal NASA server. While the technical implementation of the wiki had many challenges, the one of the biggest hurdles came from a cultural shift. Like many enterprise organizations, the EVA Operations group was accustomed to hierarchical data structures and individually-owned documents. Instead of sorting files into various folders, the wiki searches content. Rather than having a single document owner, the wiki harmonized the efforts of many contributors and established an automated revision control system. As the group adapted to the wiki, the usefulness of this single portal for information became apparent. It transformed into a useful data mining tool for EVA flight controllers and instructors, and also for hundreds of other NASA and contract employees. Program managers, engineers, astronauts, flight directors, and flight controllers in differing disciplines now have an easier-to-use, searchable system to find EVA data. This paper presents the benefits the EVA Wiki has brought to NASA's EVA community, as well as the cultural challenges it had to overcome.

ChEVAS: Combining Suprarenal EVAS with Chimney Technique

Energy Technology Data Exchange (ETDEWEB)

Torella, Francesco, E-mail: f.torella@liverpool.ac.uk [Royal Liverpool University Hospital, Liverpool Vascular & Endovascular Service (United Kingdom); Chan, Tze Y., E-mail: tze.chan@rlbuht.nhs.uk; Shaikh, Usman, E-mail: usman.shaikh@rlbuht.nhs.uk [Royal Liverpool University Hospital, Department of Radiology (United Kingdom); England, Andrew, E-mail: a.england@salford.ac.uk [University of Salford, Department of Radiography (United Kingdom); Fisher, Robert K., E-mail: robert.fisher@rlbuht.nhs.uk [Royal Liverpool University Hospital, Liverpool Vascular & Endovascular Service (United Kingdom); McWilliams, Richard G., E-mail: richard.mcwilliams@rlbuht.nhs.uk [Royal Liverpool University Hospital, Department of Radiology (United Kingdom)

2015-10-15

Endovascular sealing with the Nellix{sup ®} endoprosthesis (EVAS) is a new technique to treat infrarenal abdominal aortic aneurysms. We describe the use of endovascular sealing in conjunction with chimney stents for the renal arteries (chEVAS) in two patients, one with a refractory type Ia endoleak and an expanding aneurysm, and one with a large juxtarenal aneurysm unsuitable for fenestrated endovascular repair (EVAR). Both aneurysms were successfully excluded. Our report confirms the utility of chEVAS in challenging cases, where suprarenal seal is necessary. We suggest that, due to lack of knowledge on its durability, chEVAS should only been considered when more conventional treatment modalities (open repair and fenestrated EVAR) are deemed difficult or unfeasible.

Simulation of Martian EVA at the Mars Society Arctic Research Station

Science.gov (United States)

Pletser, V.; Zubrin, R.; Quinn, K.

The Mars Society has established a Mars Arctic Research Station (M.A.R.S.) on Devon Island, North of Canada, in the middle of the Haughton crater formed by the impact of a large meteorite several million years ago. The site was selected for its similarities with the surface of the Mars planet. During the Summer 2001, the MARS Flashline Research Station supported an extended international simulation campaign of human Mars exploration operations. Six rotations of six person crews spent up to ten days each at the MARS Flashline Research Station. International crews, of mixed gender and professional qualifications, conducted various tasks as a Martian crew would do and performed scientific experiments in several fields (Geophysics, Biology, Psychology). One of the goals of this simulation campaign was to assess the operational and technical feasibility of sustaining a crew in an autonomous habitat, conducting a field scientific research program. Operations were conducted as they would be during a Martian mission, including Extra-Vehicular Activities (EVA) with specially designed unpressurized suits. The second rotation crew conducted seven simulated EVAs for a total of 17 hours, including motorized EVAs with All Terrain Vehicles, to perform field scientific experiments in Biology and Geophysics. Some EVAs were highly successful. For some others, several problems were encountered related to hardware technical failures and to bad weather conditions. The paper will present the experiment programme conducted at the Mars Flashline Research Station, the problems encountered and the lessons learned from an EVA operational point of view. Suggestions to improve foreseen Martian EVA operations will be discussed.

Development of an EVA systems cost model. Volume 3: EVA systems cost model

Science.gov (United States)

1975-01-01

The EVA systems cost model presented is based on proposed EVA equipment for the space shuttle program. General information on EVA crewman requirements in a weightless environment and an EVA capabilities overview are provided.

Compression under a mechanical counter pressure space suit glove

Science.gov (United States)

Waldie, James M A.; Tanaka, Kunihiko; Tourbier, Dietmar; Webb, Paul; Jarvis, Christine W.; Hargens, Alan R.

2002-01-01

Background: Current gas-pressurized space suits are bulky stiff shells severely limiting astronaut function and capability. A mechanical counter pressure (MCP) space suit in the form of a tight elastic garment could dramatically improve extravehicular activity (EVA) dexterity, but also be advantageous in safety, cost, mass and volume. The purpose of this study was to verify that a prototype MCP glove exerts the design compression of 200 mmHg, a pressure similar to the current NASA EVA suit. Methods: Seven male subjects donned a pressure measurement array and MCP glove on the right hand, which was placed into a partial vacuum chamber. Average compression was recorded on the palm, the bottom of the middle finger, the top of the middle finger and the dorsum of the hand at pressures of 760 (ambient), 660 and 580 mmHg. The vacuum chamber was used to simulate the pressure difference between the low breathing pressure of the current NASA space suits (approximately 200 mmHg) and an unprotected hand in space. Results: At ambient conditions, the MCP glove compressed the dorsum of the hand at 203.5 +/- 22.7 mmHg, the bottom of the middle finger at 179.4 +/- 16.0 mmHg, and the top of the middle finger at 183.8 +/- 22.6 mmHg. The palm compression was significantly lower (59.6 +/- 18.8 mmHg, pglove compression with the chamber pressure reductions. Conclusions: The MCP glove compressed the dorsum of the hand and middle finger at the design pressure.

Exploration Space Suit Architecture: Destination Environmental-Based Technology Development

Science.gov (United States)

Hill, Terry R.

2010-01-01

This paper picks up where EVA Space Suit Architecture: Low Earth Orbit Vs. Moon Vs. Mars (Hill, Johnson, IEEEAC paper #1209) left off in the development of a space suit architecture that is modular in design and interfaces and could be reconfigured to meet the mission or during any given mission depending on the tasks or destination. This paper will walk though the continued development of a space suit system architecture, and how it should evolve to meeting the future exploration EVA needs of the United States space program. In looking forward to future US space exploration and determining how the work performed to date in the CxP and how this would map to a future space suit architecture with maximum re-use of technology and functionality, a series of thought exercises and analysis have provided a strong indication that the CxP space suit architecture is well postured to provide a viable solution for future exploration missions. Through the destination environmental analysis that is presented in this paper, the modular architecture approach provides the lowest mass, lowest mission cost for the protection of the crew given any human mission outside of low Earth orbit. Some of the studies presented here provide a look and validation of the non-environmental design drivers that will become every-increasingly important the further away from Earth humans venture and the longer they are away. Additionally, the analysis demonstrates a logical clustering of design environments that allows a very focused approach to technology prioritization, development and design that will maximize the return on investment independent of any particular program and provide architecture and design solutions for space suit systems in time or ahead of being required for any particular manned flight program in the future. The new approach to space suit design and interface definition the discussion will show how the architecture is very adaptable to programmatic and funding changes with

Augmented robotic device for EVA hand manoeuvres

Science.gov (United States)

Matheson, Eloise; Brooker, Graham

2012-12-01

During extravehicular activities (EVAs), pressurised space suits can lead to difficulties in performing hand manoeuvres and fatigue. This is often the cause of EVAs being terminated early, or taking longer to complete. Assistive robotic gloves can be used to augment the natural motion of a human hand, meaning work can be carried out more efficiently with less stress to the astronaut. Lightweight and low profile solutions must be found in order for the assistive robotic glove to be easily integrated with a space suit pressure garment. Pneumatic muscle actuators combined with force sensors are one such solution. These actuators are extremely light, yet can output high forces using pressurised gases as the actuation drive. Their movement is omnidirectional, so when combined with a flexible exoskeleton that itself provides a degree of freedom of movement, individual fingers can be controlled during flexion and extension. This setup allows actuators and other hardware to be stored remotely on the user's body, resulting in the least possible mass being supported by the hand. Two prototype gloves have been developed at the University of Sydney; prototype I using a fibreglass exoskeleton to provide flexion force, and prototype II using torsion springs to achieve the same result. The gloves have been designed to increase the ease of human movements, rather than to add unnatural ability to the hand. A state space control algorithm has been developed to ensure that human initiated movements are recognised, and calibration methods have been implemented to accommodate the different characteristics of each wearer's hands. For this calibration technique, it was necessary to take into account the natural tremors of the human hand which may have otherwise initiated unexpected control signals. Prototype I was able to actuate the user's hand in 1 degree of freedom (DOF) from full flexion to partial extension, and prototype II actuated a user's finger in 2 DOF with forces achieved

Initial Work Toward a Robotically Assisted EVA Glove

Science.gov (United States)

Rogers, J.; Peters, B.; McBryan, E.; Laske, E.

2016-01-01

The Space Suit RoboGlove is a device designed to provide additional grasp strength or endurance for an EVA crew member since gloved hand performance is a fraction of what the unencumbered human hand can achieve. There have been past efforts to approach this problem by employing novel materials and construction techniques to the glove design, as well as integrating powered assistance devices. This application of the NASA/GM RoboGlove technology uses a unique approach to integrate the robotic actuators and sensors into a Phase VI EVA glove. This design provides grasp augmentation to the glove user while active, but can also function as a normal glove when disabled. Care was taken to avoid adding excessive bulk to the glove or affecting tactility by choosing low-profile sensors and extrinsically locating the actuators. Conduits are used to guide robotic tendons from linear actuators, across the wrist, and to the fingers. The second generation of the SSRG includes updated electronics, sensors, and actuators to improve performance. The following discusses the electromechanical design, softgoods integration, and control system of the SSRG. It also presents test results from the first integration of a powered mobility element onto a space suit, the NASA Mark III. Early results show that sensor integration did not impact tactile feedback in the glove and the actuators show potential for reduction in grasp fatigue over time.

Nonventing Thermal and Humidity Control for EVA Suits, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Future manned space exploration missions will require space suits with capabilities beyond the current state of the art. Portable Life Support Systems for these...

Suited Contingency Ops Food - 2

Science.gov (United States)

Glass, J. W.; Leong, M. L.; Douglas, G. L.

2014-01-01

The contingency scenario for an emergency cabin depressurization event may require crewmembers to subsist in a pressurized suit for up to 144 hours. This scenario requires the capability for safe nutrition delivery through a helmet feed port against a 4 psi pressure differential to enable crewmembers to maintain strength and cognition to perform critical tasks. Two nutritional delivery prototypes were developed and analyzed for compatibility with the helmet feed port interface and for operational effectiveness against the pressure differential. The bag-in-bag (BiB) prototype, designed to equalize the suit pressure with the beverage pouch and enable a crewmember to drink normally, delivered water successfully to three different subjects in suits pressurized to 4 psi. The Boa restrainer pouch, designed to provide mechanical leverage to overcome the pressure differential, did not operate sufficiently. Guidelines were developed and compiled for contingency beverages that provide macro-nutritional requirements, a minimum one-year shelf life, and compatibility with the delivery hardware. Evaluation results and food product parameters have the potential to be used to improve future prototype designs and develop complete nutritional beverages for contingency events. These feeding capabilities would have additional use on extended surface mission EVAs, where the current in-suit drinking device may be insufficient.

Active Solid State Dosimetry for Lunar EVA

Science.gov (United States)

Wrbanek, John D.; Fralick, Gustave C.; Wrbanek, Susan Y.; Chen, Liang-Yu.

2006-01-01

The primary threat to astronauts from space radiation is high-energy charged particles, such as electrons, protons, alpha and heavier particles, originating from galactic cosmic radiation (GCR), solar particle events (SPEs) and trapped radiation belts in Earth orbit. There is also the added threat of secondary neutrons generated as the space radiation interacts with atmosphere, soil and structural materials.[1] For Lunar exploration missions, the habitats and transfer vehicles are expected to provide shielding from standard background radiation. Unfortunately, the Lunar Extravehicular Activity (EVA) suit is not expected to afford such shielding. Astronauts need to be aware of potentially hazardous conditions in their immediate area on EVA before a health and hardware risk arises. These conditions would include fluctuations of the local radiation field due to changes in the space radiation field and unknown variations in the local surface composition. Should undue exposure occur, knowledge of the dynamic intensity conditions during the exposure will allow more precise diagnostic assessment of the potential health risk to the exposed individual.[2

Studies Relating to EVA

Science.gov (United States)

1997-01-01

In this session, Session JA1, the discussion focuses on the following topics: The Staged Decompression to the Hypobaric Atmosphere as a Prophylactic Measure Against Decompression Sickness During Repetitive EVA; A New Preoxygenation Procedure for Extravehicular Activity (EVA); Metabolic Assessments During Extra-Vehicular Activity; Evaluation of Safety of Hypobaric Decompressions and EVA From Positions of Probabilistic Theory; Fatty Acid Composition of Plasma Lipids and Erythrocyte Membranes During Simulation of Extravehicular Activity; Biomedical Studies Relating to Decompression Stress with Simulated EVA, Overview; The Joint Angle and Muscle Signature (JAMS) System - Current Uses and Future Applications; and Experimental Investigation of Cooperative Human-Robotic Roles in an EVA Work Site.

Characterization of dynamic thermal control schemes and heat transfer pathways for incorporating variable emissivity electrochromic materials into a space suit heat rejection system

Science.gov (United States)

Massina, Christopher James

The feasibility of conducting long duration human spaceflight missions is largely dependent on the provision of consumables such as oxygen, water, and food. In addition to meeting crew metabolic needs, water sublimation has long served as the primary heat rejection mechanism in space suits during extravehicular activity (EVA). During a single eight hour EVA, approximately 3.6 kg (8 lbm) of water is lost from the current suit. Reducing the amount of expended water during EVA is a long standing goal of space suit life support systems designers; but to date, no alternate thermal control mechanism has demonstrated the ability to completely eliminate the loss. One proposed concept is to convert the majority of a space suit's surface area into a radiator such that the local environment can be used as a radiative thermal sink for rejecting heat without mass loss. Due to natural variations in both internal (metabolic) loads and external (environmental) sink temperatures, radiative transport must be actively modulated in order to maintain an acceptable thermal balance. Here, variable emissivity electrochromic devices are examined as the primary mechanism for enabling variable heat rejection. This dissertation focuses on theoretical and empirical evaluations performed to determine the feasibility of using a full suit, variable emissivity radiator architecture for space suit thermal control. Operational envelopes are described that show where a given environment and/or metabolic load combination may or may not be supported by the evaluated thermal architecture. Key integration considerations and guidelines include determining allowable thermal environments, defining skin-to-radiator heat transfer properties, and evaluating required electrochromic performance properties. Analysis also considered the impacts of dynamic environmental changes and the architecture's extensibility to EVA on the Martian surface. At the conclusion of this work, the full suit, variable emissivity

Effect of EVA on thermal stability, flammability, mechanical properties of HDPE/EVA/Mg(OH)2 composites

Science.gov (United States)

Cao, R.; Deng, Z. L.; Ma, Y. H.; Chen, X. L.

2017-06-01

In this work, ethylene vinyl acetate (EVA) is introduced to improve the properties of high-density polyethylene (HDPE)/magnesium hydroxide (MH) composites. The thermal stability, flame retardancy and mechanical properties of HDPE/EVA/MH composites are investigated and discussed. With increasing content of EVA, the limiting oxygen index (LOI) of the composites increases. The thermal stability analysis shows that the initial decomposition temperature begins at a low temperature; however, the residues of the composites at 600°C increase when HDPE is replaced by small amounts of EVA. The early degradation absorbs heat, dilute oxygen and residue. During this process, it protects the matrix inside. Compared with the HDPE/MH and EVA/MH composites, the ternary HDPE/EVA/MH composites exhibit better flame retardancy by increasing the LOI values, and reducing the heat release rate (HRR) and total heat release (THR). With increasing content of EVA, the mechanical properties can also be improved, which is attributed to the good affinity between EVA and MH particles.

NASA Research Announcement Phase 2 Final Report for the Development of a Power Assisted Space Suit Glove

Science.gov (United States)

Lingo, Robert; Cadogan, Dave; Sanner, Rob; Sorenson, Beth

1997-01-01

The main goal of this program was to develop an unobtrusive power-assisted EVA glove metacarpalphalangeal (MCP) joint that could provide the crew member with as close to nude body performance as possible, and to demonstrate the technology feasibility of power assisted space suit components in general. The MCP joint was selected due to its being representative of other space suit joints, such as the shoulder, hip and carpometacarpal joint, that would also greatly benefit from this technology. In order to meet this objective, a development team of highly skilled and experienced personnel was assembled. The team consisted of two main entities. The first was comprised of ILC's experienced EVA space suit glove designers, who had the responsibility of designing and fabricating a low torque MCP joint which would be compatible with power assisted technology. The second part of the team consisted of space robotics experts from the University of Maryland's Space Systems Laboratory. This team took on the responsibility of designing and building the robotics aspects of the power-assist system. Both parties addressed final system integration responsibilities.

Space Suit Simulator (S3) for Partial Gravity EVA Experimentation and Training, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Pressurized space suits impose high joint torques on the wearer, reducing mobility for upper and lower body motions. Using actual space suits in training or...

Ventilation Transport Trade Study for Future Space Suit Life Support Systems

Science.gov (United States)

Kempf, Robert; Vogel, Matthew; Paul, Heather L.

2008-01-01

A new and advanced portable life support system (PLSS) for space suit surface exploration will require a durable, compact, and energy efficient system to transport the ventilation stream through the space suit. Current space suits used by NASA circulate the ventilation stream via a ball-bearing supported centrifugal fan. As NASA enters the design phase for the next generation PLSS, it is necessary to evaluate available technologies to determine what improvements can be made in mass, volume, power, and reliability for a ventilation transport system. Several air movement devices already designed for commercial, military, and space applications are optimized in these areas and could be adapted for EVA use. This paper summarizes the efforts to identify and compare the latest fan and bearing technologies to determine candidates for the next generation PLSS.

EVA Skills Training

Science.gov (United States)

Parazynski, Scott

2012-01-01

Dr. Parazynski and a colleague from Extravehicular Activity (EVA), Robotics, & Crew Systems Operations (DX) worked closely to build the EVA Skills Training Program, and for the first time, defined the gold standards of EVA performance, allowing crewmembers to increase their performance significantly. As part of the program, individuals had the opportunity to learn at their own rate, taking additional water time as required, to achieve that level of performance. This focus on training to one's strengths and weaknesses to bolster them enabled the Crew Office and DX to field a much larger group of spacewalkers for the daunting "wall of EVA" required for the building and maintenance of the ISS. Parazynski also stressed the need for designers to understand the capabilities and the limitations of a human in a spacesuit, as well as opportunities to improve future generations of space. He shared lessons learned (how the Crew Office engaged in these endeavors) and illustrated the need to work as a team to develop these complex systems.

Modeling and dynamic simulation of astronaut's upper limb motions considering counter torques generated by the space suit.

Science.gov (United States)

Li, Jingwen; Ye, Qing; Ding, Li; Liao, Qianfang

2017-07-01

Extravehicular activity (EVA) is an inevitable task for astronauts to maintain proper functions of both the spacecraft and the space station. Both experimental research in a microgravity simulator (e.g. neutral buoyancy tank, zero-g aircraft or a drop tower/tube) and mathematical modeling were used to study EVA to provide guidance for the training on Earth and task design in space. Modeling has become more and more promising because of its efficiency. Based on the task analysis, almost 90% of EVA activity is accomplished through upper limb motions. Therefore, focusing on upper limb models of the body and space suit is valuable to this effort. In previous modeling studies, some multi-rigid-body systems were developed to simplify the human musculoskeletal system, and the space suit was mostly considered as a part of the astronaut body. With the aim to improve the reality of the models, we developed an astronauts' upper limb model, including a torque model and a muscle-force model, with the counter torques from the space suit being considered as a boundary condition. Inverse kinematics and the Maggi-Kane's method was applied to calculate the joint angles, joint torques and muscle force given that the terminal trajectory of upper limb motion was known. Also, we validated the muscle-force model using electromyogram (EMG) data collected in a validation experiment. Muscle force calculated from our model presented a similar trend with the EMG data, supporting the effectiveness and feasibility of the muscle-force model we established, and also, partially validating the joint model in kinematics aspect.

Evaluation of safety of hypobaric decompressions and EVA from positions of probabilistic theory

Science.gov (United States)

Nikolaev, V. P.

Formation and subsequent evolution of gas bubbles in blood and tissues of subjects exposed to decompression are casual processes in their nature. Such character of bubbling processes in a body predetermines probabilistic character of decompression sickness (DCS) incidence in divers, aviators and astronauts. Our original probabilistic theory of decompression safety is based on stochastic models of these processes and on the concept of critical volume of a free gas phase in body tissues. From positions of this theory, the probability of DCS incidence during single-stage decompressions and during hypobaric decompressions under EVA in particular, is defined by the distribution of possible values of nucleation efficiency in "pain" tissues and by its critical significance depended on the parameters of a concrete decompression. In the present study the following is shown: 1) the dimensionless index of critical nucleation efficiency for "pain" body tissues is a more adequate index of decompression stress in comparison with Tissue Ratio, TR; 2) a priory the decompression under EVA performed according to the Russian protocol is more safe than decompression under EVA performed in accordance with the U.S. protocol; 3) the Russian space suit operated at a higher pressure and having a higher "rigidity" induces a stronger inhibition of mechanisms of cavitation and gas bubbles formation in tissues of a subject located in it, and by that provides a more considerable reduction of the DCS risk during real EVA performance.

Carbon Dioxide Control System for a Mars Space Suit Life Support System

Science.gov (United States)

Alptekin, Gokhan; Jayaraman, Ambalavanan; Copeland, Robert; Parker, Amanda; Paul, Heather L.

2011-01-01

Carbon dioxide (CO2) control during Extravehicular Activities (EVAs) on Mars will be challenging. Lithium hydroxide (LiOH) canisters have impractical logistics penalties, and regenerable metal oxide (MetOx) canisters weigh too much. Cycling bed systems and permeable membranes that are regenerable in space vacuum cannot vent on Mars due to the high partial pressure of CO2 in the atmosphere. Although sweep gas regeneration is under investigation, the feasibility, logistics penalties, and failure modes associated with this technique have not been fully determined. TDA Research, Inc. is developing a durable, high-capacity regenerable adsorbent that can remove CO2 from the space suit ventilation loop. The system design allows sorbent regeneration at or above 6 torr, eliminating the potential for Martian atmosphere to leak into the regeneration bed and into the ventilation loop. Regeneration during EVA minimizes the amount of consumables to be brought from Earth and makes the mission more affordable, while providing great operational flexibility during EVA. The feasibility of the concept has been demonstrated in a series of bench-scale experiments and a preliminary system analysis. This paper presents the latest results from these sorbent and system development efforts.

Advanced Sensor Platform to Evaluate Manloads For Exploration Suit Architectures

Science.gov (United States)

McFarland, Shane; Pierce, Gregory

2016-01-01

Space suit manloads are defined as the outer bounds of force that the human occupant of a suit is able to exert onto the suit during motion. They are defined on a suit-component basis as a unit of maximum force that the suit component in question must withstand without failure. Existing legacy manloads requirements are specific to the suit architecture of the EMU and were developed in an iterative fashion; however, future exploration needs dictate a new suit architecture with bearings, load paths, and entry capability not previously used in any flight suit. No capability currently exists to easily evaluate manloads imparted by a suited occupant, which would be required to develop requirements for a flight-rated design. However, sensor technology has now progressed to the point where an easily-deployable, repeatable and flexible manloads measuring technique could be developed leveraging recent advances in sensor technology. INNOVATION: This development positively impacts schedule, cost and safety risk associated with new suit exploration architectures. For a final flight design, a comprehensive and accurate man loads requirements set must be communicated to the contractor; failing that, a suit design which does not meet necessary manloads limits is prone to failure during testing or worse, during an EVA, which could cause catastrophic failure of the pressure garment posing risk to the crew. This work facilitates a viable means of developing manloads requirements using a range of human sizes & strengths. OUTCOME / RESULTS: Performed sensor market research. Highlighted three viable options (primary, secondary, and flexible packaging option). Designed/fabricated custom bracket to evaluate primary option on a single suit axial. Manned suited manload testing completed and general approach verified.

Conversion of IVA Human Computer Model to EVA Use and Evaluation and Comparison of the Result to Existing EVA Models

Science.gov (United States)

Hamilton, George S.; Williams, Jermaine C.

1998-01-01

This paper describes the methods, rationale, and comparative results of the conversion of an intravehicular (IVA) 3D human computer model (HCM) to extravehicular (EVA) use and compares the converted model to an existing model on another computer platform. The task of accurately modeling a spacesuited human figure in software is daunting: the suit restricts the human's joint range of motion (ROM) and does not have joints collocated with human joints. The modeling of the variety of materials needed to construct a space suit (e. g. metal bearings, rigid fiberglass torso, flexible cloth limbs and rubber coated gloves) attached to a human figure is currently out of reach of desktop computer hardware and software. Therefore a simplified approach was taken. The HCM's body parts were enlarged and the joint ROM was restricted to match the existing spacesuit model. This basic approach could be used to model other restrictive environments in industry such as chemical or fire protective clothing. In summary, the approach provides a moderate fidelity, usable tool which will run on current notebook computers.

Interaction of Space Suits with Windblown Soil: Preliminary Mars Wind Tunnel Results

Science.gov (United States)

Marshall, J.; Bratton, C.; Kosmo, J.; Trevino, R.

1999-09-01

Experiments in the Mars Wind Tunnel at NASA Ames Research Center show that under Mars conditions, spacesuit materials are highly susceptible to dust contamination when exposed to windblown soil. This effect was suspected from knowledge of the interaction of electrostatically adhesive dust with solid surfaces in general. However, it is important to evaluate the respective roles of materials, meteorological and radiation effects, and the character of the soil. The tunnel permits evaluation of dust contamination and sand abrasion of space suits by simulating both pressure and wind conditions on Mars. The long-term function of space suits on Mars will be primarily threatened by dust contamination. Lunar EVA activities caused heavy contamination of space suits, but the problem was never seriously manifest because of the brief utilization of the suits, and the suits were never reused. Electrostatically adhering dust grains have various detrimental effects: (1) penetration and subsequent wear of suit fabrics, (2) viewing obscuration through visors and scratching/pitting of visor surfaces, (3) penetration, wear, and subsequent seizing-up of mechanical suit joints, (4) changes in albedo and therefore of radiation properties of external heat-exchanger systems, (5) changes in electrical conductivity of suit surfaces which may affect tribocharging of suits and create spurious discharge effects detrimental to suit electronics/radio systems. Additional information is contained in the original.

Extravehicular Activity Fact Sheet: An EVA Chronology

Data.gov (United States)

National Aeronautics and Space Administration — Walking to Olympus: An EVA Chronology chronicles the 154 EVAs conducted from March 1965 to April 1997. It is intended to make clear the crucial role played by EVA in...

Extravehicular Activity (EVA) Technology Development Status and Forecast

Science.gov (United States)

Chullen, Cinda; Westheimer, David T.

2010-01-01

Beginning in Fiscal Year (FY) 2011, Extravehicular activity (EVA) technology development became a technology foundational domain under a new program Enabling Technology Development and Demonstration. The goal of the EVA technology effort is to further develop technologies that will be used to demonstrate a robust EVA system that has application for a variety of future missions including microgravity and surface EVA. Overall the objectives will be reduce system mass, reduce consumables and maintenance, increase EVA hardware robustness and life, increase crew member efficiency and autonomy, and enable rapid vehicle egress and ingress. Over the past several years, NASA realized a tremendous increase in EVA system development as part of the Exploration Technology Development Program and the Constellation Program. The evident demand for efficient and reliable EVA technologies, particularly regenerable technologies was apparent under these former programs and will continue to be needed as future mission opportunities arise. The technological need for EVA in space has been realized over the last several decades by the Gemini, Apollo, Skylab, Space Shuttle, and the International Space Station (ISS) programs. EVAs were critical to the success of these programs. Now with the ISS extension to 2028 in conjunction with a current forecasted need of at least eight EVAs per year, the EVA technology life and limited availability of the EMUs will become a critical issue eventually. The current Extravehicular Mobility Unit (EMU) has vastly served EVA demands by performing critical operations to assemble the ISS and provide repairs of satellites such as the Hubble Space Telescope. However, as the life of ISS and the vision for future mission opportunities are realized, a new EVA systems capability could be an option for the future mission applications building off of the technology development over the last several years. Besides ISS, potential mission applications include EVAs for

High Performance EVA Glove Collaboration: Glove Injury Data Mining Effort

Science.gov (United States)

Reid, C. R.; Benson, E.; England, S.; Charvat, J.; Norcross, J. R.; McFarland, S. M.; Rajulu, S.

2015-01-01

Human hands play a significant role during Extravehicular Activity (EVA) missions and Neutral Buoyancy Lab (NBL) training events, as they are needed for translating and performing tasks in the weightless environment. Because of this high frequency usage, hand and arm related injuries are known to occur during EVA and EVA training in the NBL. The primary objectives of this investigation were to: 1) document all known EVA glove related injuries and circumstances of these incidents, 2) determine likely risk factors, and 3) recommend interventions where possible that could be implemented in the current and future glove designs. METHODS: The investigation focused on the discomforts and injuries of U.S. crewmembers who had worn the pressurized Extravehicular Mobility Unit (EMU) spacesuit and experienced 4000 Series or Phase VI glove related incidents during 1981 to 2010 for either EVA ground training or in-orbit flight. We conducted an observational retrospective case-control investigation using 1) a literature review of known injuries, 2) data mining of crew injury, glove sizing, and hand anthropometry databases, 3) descriptive statistical analyses, and finally 4) statistical risk correlation and predictor analyses to better understand injury prevalence and potential causation. Specific predictor statistical analyses included use of principal component analyses (PCA), multiple logistic regression, and survival analyses (Cox proportional hazards regression). Results of these analyses were computed risk variables in the forms of odds ratios (likelihood of an injury occurring given the magnitude of a risk variable) and hazard ratios (likelihood of time to injury occurrence). Due to the exploratory nature of this investigation, we selected predictor variables significant at p=0.15. RESULTS: Through 2010, there have been a total of 330 NASA crewmembers, from which 96 crewmembers performed 322 EVAs during 1981-2010, resulting in 50 crewmembers being injured inflight and 44

An investigation on radiation crosslinked foam of LDPE/EVA blends

International Nuclear Information System (INIS)

Siqin Dalai; Chen Wenxiu

1995-01-01

LDPE/EVA blend, irradiated by γ-ray then expansed by heat as a foam material, the EVA content in LDPE/EVA blend was benefited to form gelation. The gel fraction on irradiated LDPE/EVA blend increased with the increasing of its EVA content in a given dose. The gel fraction values of LDPE/EVA blend with 30% EVA content were higher than those of other blends in a same given dose, its gel fraction value was 1.7 times as those values of LDPE without EVA. The gel fractions on LDPE/EVA blend were increased with dose in oxygen, in air and in nitrogen, the formation of gel was limited by oxygen. The oxidation products on foam of LDPE/EVA blend were observed in nitrogen, in air and in oxygen by FTIR spectra. The LDPE/EVA blend system has no protection effect from oxidation comparison with the LDPE system without EVA which has less oxidation product than those without EVA in a same given gel fraction. The gel fraction on foam of LDPE/EVA blend around 25-35%, dose 25 ± 5kGy, irradiated by γ-ray in air or in nitrogen, with higher expansion ratio (19), smaller cell diameter (0.175mm), lower apparent density (0.042g/cm 3 ), higher tensile strength (0.40MPa) and longer elongation at break (290-360%) on foam of LDPE/EVA blend were selected. It was opitimum condition for application in this systems. The relations among gel fraction on LDPE/EVA blend, expansion ratio, apparent density, average cell diameter and mechanical properties of foamed sheet were discussed. (author)

Eva ja Adele: "Kus oleme meie, seal on muuseum" / Eva & Adele ; intervjueerinud Tanel Veenre

Index Scriptorium Estoniae

Eva & Adele, kunstnikepaar

2009-01-01

Berliini kunstnikepaari Eva & Adele näitus "Stereoefekt" Tallinna Kunstihoones 28. maini, kuraator Harry Liivrand. Kunstnikud räägivad koostööst meediaga, sooküsimusest, julgusest teha kunstis midagi uut, oma otsusest elada elu Eva ja Adelena, inimeste julgusest teha valikuid, inimlikkusest, üksindusest, oma maalidest, kollaažidest ja videotest, missioonitundest

Miniature EVA Software Defined Radio

Science.gov (United States)

Pozhidaev, Aleksey

2012-01-01

As NASA embarks upon developing the Next-Generation Extra Vehicular Activity (EVA) Radio for deep space exploration, the demands on EVA battery life will substantially increase. The number of modes and frequency bands required will continue to grow in order to enable efficient and complex multi-mode operations including communications, navigation, and tracking applications. Whether conducting astronaut excursions, communicating to soldiers, or first responders responding to emergency hazards, NASA has developed an innovative, affordable, miniaturized, power-efficient software defined radio that offers unprecedented power-efficient flexibility. This lightweight, programmable, S-band, multi-service, frequency- agile EVA software defined radio (SDR) supports data, telemetry, voice, and both standard and high-definition video. Features include a modular design, an easily scalable architecture, and the EVA SDR allows for both stationary and mobile battery powered handheld operations. Currently, the radio is equipped with an S-band RF section. However, its scalable architecture can accommodate multiple RF sections simultaneously to cover multiple frequency bands. The EVA SDR also supports multiple network protocols. It currently implements a Hybrid Mesh Network based on the 802.11s open standard protocol. The radio targets RF channel data rates up to 20 Mbps and can be equipped with a real-time operating system (RTOS) that can be switched off for power-aware applications. The EVA SDR's modular design permits implementation of the same hardware at all Network Nodes concept. This approach assures the portability of the same software into any radio in the system. It also brings several benefits to the entire system including reducing system maintenance, system complexity, and development cost.

Applications of EVA guidelines and design criteria. Volume 3: EVA systems cost model formating

Science.gov (United States)

Brown, N. E.

1973-01-01

The development of a model for estimating the impact of manned EVA costs on future payloads is discussed. Basic information on the EV crewman requirements, equipment, physical and operational characteristics, and vehicle interfaces is provided. The cost model is being designed to allow system designers to quantify the impact of EVA on vehicle and payload systems.

EVA/TiO2 nanocomposite: Study of the properties thermal and crystallinity of the EVA/TiO2 nanocomposite

International Nuclear Information System (INIS)

Valentim, Ana C.S.; Tavares, Maria I.B.; Silva, Emerson O. da

2011-01-01

The effect of titanium dioxide nanoparticles on the thermal properties and crystallinity of the ethylene vinyl acetate (EVA) copolymer containing 28% vinyl acetate were investigated. The EVA/TiO 2 nanocomposite films with TiO 2 contents of 0,10-1% relative to the total mass of EVA, were prepared via solution. The prepared films were characterized using TG, and XRD methods. (author)

Synthesis of EVA/MWNT nanocomposites by radiation induced crosslinking

International Nuclear Information System (INIS)

Dubey, K.A.; Bhardwaj, Y.K.; Chaudhari, C.V.; Sabharwal, S.

2008-01-01

Full text: EVA is widely used as an insulating material for high voltage cables and in the footwear and toy industries due to its high flexibility and chemical inertness. The nano-composites of EVA with MWNT are of the special interest because incorporation of suitable amount of MWNT in EVA matrix is expected to significantly enhance EVA's thermal and mechanical properties, and open a new domain of applications. The modification of EVA by using high-energy radiation and with particulate filler has been widely practiced; however, there is not much information available on the radiation processing of EVA nanocomposites. To understand the effect of radiation and of MWNT addition on the physico-mechanical characteristics of EVA, different compositions of ethylene vinyl acetate (EVA)/multiple walled carbon nanotube (MWNT) nanocomposites were prepared by mixing in Brabender and subjected to different doses of gamma radiation. The efficiency of radiation vulcanization was analyzed by gel-content, Charlesby-Pinner parameter and crosslinking density measurements. Gamma radiation induced crosslinking was found to increase with MWNT fraction in EVA/MWNT nanocomposites (P o /q o range: 1.15-0.98). These results ruled out the possibility of a significant neutralization of single ionization spurs by MWNT addition. The polymer-filler interaction parameter determined from Kraus plot indicated good interaction between EVA and MWNTs. Storage modulus changed from 7 x 10 7 Pa to 1.8 x 10 8 Pa with incorporation of 5% (wt/wt) MWNT while density increased from 0.78 g/cc to 0.80 g/cc

MULTIFUNCTIONAL, SELF-HEALING HYBRIDSIL MATERIALS FOR EVA SPACE SUIT PRESSURE GARMENT SYSTEMS, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — A Phase II SBIR transition of NanoSonic's high flex HybridSil space suit bladder and glove materials will provide a pivotal funding bridge toward Phase III...

Design Considerations for a Crewed Mars Ascent Vehicle

Science.gov (United States)

Rucker, Michelle A.

2015-01-01

Exploration architecture studies identified the Mars Ascent Vehicle (MAV) as one of the largest "gear ratio" items in a crewed Mars mission. Because every kilogram of mass ascended from the Martian surface requires seven kilograms or more of ascent propellant, it is desirable for the MAV to be as small and lightweight as possible. Analysis identified four key factors that drive MAV sizing: 1) Number of crew: more crew members require more equipment-and a larger cabin diameter to hold that equipment-with direct implications to structural, thermal, propulsion, and power subsystem mass. 2) Which suit is worn during ascent: Extravehicular Activity (EVA) type suits are physically larger and heavier than Intravehicular Activity (IVA) type suits and because they are less flexible, EVA suits require more elbow-room to maneuver in and out of. An empty EVA suit takes up about as much cabin volume as a crew member. 3) How much time crew spends in the MAV: less than about 12 hours and the MAV can be considered a "taxi" with few provisions for crew comfort. However, if the crew spends more than 12 consecutive hours in the MAV, it begins to look like a Habitat requiring more crew comfort items. 4) How crew get into/out of the MAV: ingress/egress method drives structural mass (for example, EVA hatch vs. pressurized tunnel vs. suit port) as well as consumables mass for lost cabin atmosphere, and has profound impacts on surface element architecture. To minimize MAV cabin mass, the following is recommended: Limit MAV usage to 24 consecutive hours or less; discard EVA suits on the surface and ascend wearing IVA suits; Limit MAV functionality to ascent only, rather than dual-use ascent/habitat functions; and ingress/egress the MAV via a detachable tunnel to another pressurized surface asset.

Hydrogeology of the Olševa massif (Slovenia

Directory of Open Access Journals (Sweden)

Jure Krivic

2002-12-01

Full Text Available Olševa consists of highly pervious carbonates, forming a relatively big fractured and karstified aquifer. Due to its high-altitude mountainous nature, the aquifer is unpolluted and therefore has to be regarded as a potential source of drinking water for the future.The Olševa aquifer is tectonically divided into three parts. Groundwater from the two smaller aquifers, covering areas of 1,9 and 0,8 km2, located in eastern part of Ol{eva massif, flows toward Northeast into Meža river basin. In spite of several transversal faults, the rest of Olševa massif forms a relatively uniform aquifer that is conveying groundwater in westerly direction towards Rjavica valley. Rjavica valley in Austria represents the discharge area of a majority of groundwater from the main Ol{eva aquifer.

Space Suit Portable Life Support System (PLSS) 2.0 Unmanned Vacuum Environment Testing

Science.gov (United States)

Watts, Carly; Vogel, Matthew

2016-01-01

For the first time in more than 30 years, an advanced space suit Portable Life Support System (PLSS) design was operated inside a vacuum chamber representative of the flight operating environment. The test article, PLSS 2.0, was the second system-level integrated prototype of the advanced PLSS design, following the PLSS 1.0 Breadboard that was developed and tested throughout 2011. Whereas PLSS 1.0 included five technology development components with the balance the system simulated using commercial-off-the-shelf items, PLSS 2.0 featured first generation or later prototypes for all components less instrumentation, tubing and fittings. Developed throughout 2012, PLSS 2.0 was the first attempt to package the system into a flight-like representative volume. PLSS 2.0 testing included an extensive functional evaluation known as Pre-Installation Acceptance (PIA) testing, Human-in-the-Loop testing in which the PLSS 2.0 prototype was integrated via umbilicals to a manned prototype space suit for 19 two-hour simulated EVAs, and unmanned vacuum environment testing. Unmanned vacuum environment testing took place from 1/9/15-7/9/15 with PLSS 2.0 located inside a vacuum chamber. Test sequences included performance mapping of several components, carbon dioxide removal evaluations at simulated intravehicular activity (IVA) conditions, a regulator pressure schedule assessment, and culminated with 25 simulated extravehicular activities (EVAs). During the unmanned vacuum environment test series, PLSS 2.0 accumulated 378 hours of integrated testing including 291 hours of operation in a vacuum environment and 199 hours of simulated EVA time. The PLSS prototype performed nominally throughout the test series, with two notable exceptions including a pump failure and a Spacesuit Water Membrane Evaporator (SWME) leak, for which post-test failure investigations were performed. In addition to generating an extensive database of PLSS 2.0 performance data, achievements included requirements and

EVA: continuous automatic evaluation of protein structure prediction servers.

Science.gov (United States)

Eyrich, V A; Martí-Renom, M A; Przybylski, D; Madhusudhan, M S; Fiser, A; Pazos, F; Valencia, A; Sali, A; Rost, B

2001-12-01

Evaluation of protein structure prediction methods is difficult and time-consuming. Here, we describe EVA, a web server for assessing protein structure prediction methods, in an automated, continuous and large-scale fashion. Currently, EVA evaluates the performance of a variety of prediction methods available through the internet. Every week, the sequences of the latest experimentally determined protein structures are sent to prediction servers, results are collected, performance is evaluated, and a summary is published on the web. EVA has so far collected data for more than 3000 protein chains. These results may provide valuable insight to both developers and users of prediction methods. http://cubic.bioc.columbia.edu/eva. eva@cubic.bioc.columbia.edu

EVA1A inhibits GBM cell proliferation by inducing autophagy and apoptosis

Energy Technology Data Exchange (ETDEWEB)

Shen, Xue; Kan, Shifeng; Liu, Zhen [Department of Cell Biology, School of Basic Medical Sciences, Peking University Health Science Center, Beijing 100191 (China); Lu, Guang [Department of Cell Biology, School of Basic Medical Sciences, Peking University Health Science Center, Beijing 100191 (China); Department of Physiology, Yong Loo Lin School of Medicine, National University of Singapore, Singapore 117597 (Singapore); Zhang, Xiaoyan [Department of Cell Biology, School of Basic Medical Sciences, Peking University Health Science Center, Beijing 100191 (China); Chen, Yingyu [Department of Immunology, School of Basic Medical Sciences, Peking University Health Science Center, Beijing 100191 (China); Peking University Center for Human Disease Genomics, Beijing 100191 (China); Bai, Yun, E-mail: baiyun@bjmu.edu.cn [Department of Cell Biology, School of Basic Medical Sciences, Peking University Health Science Center, Beijing 100191 (China)

2017-03-01

Eva-1 homolog A (EVA1A) is a novel lysosome and endoplasmic reticulum-associated protein involved in autophagy and apoptosis. In this study, we constructed a recombinant adenovirus 5-EVA1A vector (Ad5-EVA1A) to overexpress EVA1A in glioblastoma (GBM) cell lines and evaluated its anti-tumor activities in vitro and in vivo. We found that overexpression of EVA1A in three GBM cell lines (U251, U87 and SHG44) resulted in a suppression of tumor cell growth via activation of autophagy and induction of cell apoptosis in a dose- and time-dependent manner. EVA1A-mediated autophagy was associated with inactivation of the mTOR/RPS6KB1 signaling pathway. Furthermore in vivo, overexpression of EVA1A successfully inhibited tumor growth in NOD/SCID mice. Our data suggest that EVA1A-induced autophagy and apoptosis play a role in suppressing the development of GBM and their up-regulation may be an effective method for treating this form of cancer. - Highlights: • Overexpression of EVA1A suppresses GBM cell growth. • EVA1A induces autophagy through the mTOR/RPS6KB1 pathway. • EVA1A induces GBM cell apoptosis. • EVA1A inhibits the development of GBM in vivo.

Ettevõtte tegevuse hindamine : EVA meetod / Kristo Reinsalu

Index Scriptorium Estoniae

Reinsalu, Kristo

2001-01-01

Järgneb: Raamatupidamisuudised, nr. 7, 2001, lk. 19-25. Ilmunud ka: Buhgalterskije Novosti, nr. 6, 2001, lk. 17-22; nr. 7, 2001, lk. 15-18; nr. 8, 2001, lk. 21-24. Majandusliku lisandväärtuse meetodist EVA - Economic Value Added - leidmisest ja standardimisest. Tabelid ja diagrammid: Hansapanga Grupi EVA septembris 2000; korrelatsioon turuväärtusega; tegevustulemused: mittefinantsiline lähenemine; preemia määramine; EVA ja Benchmarking

Caracterização de resíduos de copolímeros de etileno-acetato de vinila - EVA Characterization of ethylene-vinyl acetate copolymer (EVA residues

Directory of Open Access Journals (Sweden)

Ademir J. Zattera

2005-03-01

Full Text Available O poli[(etileno-co-(acetato de vinila] (EVA possui grande aplicação na indústria calçadista, sendo utilizado na confecção de placas expandidas para posterior corte de palmilhas e entressolas. Estudos realizados na região sul do Brasil mostraram que os resíduos gerados pela indústria calçadista foram superiores a 200 toneladas/mês em 2001, sendo o maior volume oriundo de recortes de placas expandidas. Por isso, o objetivo deste trabalho foi o de caracterizar resíduos de EVA de chapas expandidas, visando à reciclagem mecânica desse material. Análises em MEV demonstraram que o resíduo de EVA apresenta uma morfologia microcelular que é destruída após o processo de moagem. O resíduo de EVA moído apresenta duas fases, uma reticulada (matriz e uma não-reticulada (dispersa. O resíduo de EVA apresentou teor de gel de aproximadamente 75% em massa, cerca de 20% em massa de acetato de vinila (VAc, fora processado a partir de EVA com aproximadamente 28% de VAc e possui teor de carga inorgânica de 20% em massa, segundo análises em TGA. O EVA resíduo apresentou maiores valores de módulo elástico e de dureza, e menores valores de elongação na ruptura e de resistência ao impacto Izod. O custo energético da moagem do resíduo de EVA foi calculado como sendo inferior a 5% do valor do EVA virgem.Poly[(ethylene-co-(vinyl acetate] (EVA has large application in the shoes industries, especially as expanded sheets, in order to produce insoles and innersoles. Studies carried out in the south region of Brazil in 2001 have demonstrated that the residues generated by shoes industries were higher than 200 ton/month, the major part of which is composed by EVA expanded sheets. With this in mind, the objective of this work was to characterize the residues of expanded EVA and also to analyze the milling cost in order to make the recycling possible. The EVA residues presented originally a microcellular structure, which was destroyed after milling

Intra-EVA Space-to-Ground Interactions when Conducting Scientific Fieldwork Under Simulated Mars Mission Constraints

Science.gov (United States)

Beaton, Kara H.; Chappell, Steven P.; Abercromby, Andrew F. J.; Lim, Darlene S. S.

2018-01-01

with the MSC via voice and text messaging. They also provided scientific instrument data, still imagery, video streams from chest-mounted cameras, GPS location tracking information. The MSC monitored and reviewed incoming data from the field across delay and provided recommendations for pre-sampling and sampling tasks based on their collective expertise. The scientists used dynamic priority ranking lists, referred to as dynamic leaderboards, to track and rank candidate samples relative to one another and against the science objectives for the current EVA and the overall mission. Updates to the dynamic leaderboards throughout the EVA were relayed regularly to the IV crewmembers. The use of these leaderboards enabled the crew to track the dynamic nature of the MSC recommendations and helped minimize crew idle time (defined as time spent waiting for input from Earth during which no other productive tasks are being performed). EVA timelines were strategically designed to enable continuous (delayed) feedback from an Earth-based Science Team while simultaneously minimizing crew idle time. Such timelines are operationally advantageous, reducing transport costs by eliminating the need for crews to return to the same locations on multiple EVAs while still providing opportunities for recommendations from science experts on Earth, and scientifically advantageous by minimizing the potential for cross-contamination across sites. This paper will highlight the space-to-ground interaction results from the three BASALT field deployments, including planned versus actual EVA timeline data, ground assimilation times (defined as the amount of time available to the MSC to provide input to the crew), and idle time. Furthermore, we describe how these results vary under the different communication latency and bandwidth conditions. Together, these data will provide a basis for guiding and prioritizing capability development for future human exploration missions.

Wearing a training version of the Extravehicular Mobility Unit (EMU) space suit, astronaut Mario

Science.gov (United States)

1995-01-01

STS-77 TRAINING VIEW --- Wearing a training version of the Extravehicular Mobility Unit (EMU) space suit, astronaut Mario Runco, mission specialist, prepares to participate in an underwater rehearsal of a contingency Extravehicular Activity (EVA). This type of training routinely takes place in the 25-feet deep pool of the Johnson Space Centers (JSC) Weightless Environment Training Center (WET-F). The training prepares at least two crew members on each flight for procedures to follow outside the spacecraft in event of failure of remote methods to perform various chores.

EVA Glove Research Team

Science.gov (United States)

Strauss, Alvin M.; Peterson, Steven W.; Main, John A.; Dickenson, Rueben D.; Shields, Bobby L.; Lorenz, Christine H.

1992-01-01

The goal of the basic research portion of the extravehicular activity (EVA) glove research program is to gain a greater understanding of the kinematics of the hand, the characteristics of the pressurized EVA glove, and the interaction of the two. Examination of the literature showed that there existed no acceptable, non-invasive method of obtaining accurate biomechanical data on the hand. For this reason a project was initiated to develop magnetic resonance imaging as a tool for biomechanical data acquisition and visualization. Literature reviews also revealed a lack of practical modeling methods for fabric structures, so a basic science research program was also initiated in this area.

Carbon Dioxide Control System for a Mars Space Suit Life Support System

Science.gov (United States)

Alptekin, Gokhan; Jayaraman, Ambalavanan; Copeland, Robert; Parker, amanda; Paul, Heather L.

2010-01-01

Carbon dioxide (CO2) control during Extravehicular Activities (EVAs) on Mars will be challenging. Lithium hydroxide (LiOH) canisters have impractical logistics penalties, and regenerable metal oxide (MetOx) canisters weigh too much. Cycling bed systems and permeable membranes that are regenerable in space vacuum cannot vent on Mars due to the high partial pressure of CO2 in the atmosphere. Although sweep gas regeneration is under investigation, the feasibility, logistics penalties, and failure modes associated with this technique have not been fully determined. TDA Research, Inc. is developing a durable, high-capacity regenerable adsorbent that can remove CO2 from the space suit ventilation loop. The system design allows sorbent regeneration at or above 6 torr, eliminating the potential for Martian atmosphere to leak into the regeneration bed and into the ventilation loop. Regeneration during EVA eliminates the consumable requirement related to the use of LiOH canisters and the mission duration limitations imposed by MetOx system. The concept minimizes the amount of consumable to be brought from Earth and makes the mission more affordable, while providing great operational flexibility during EVA. The feasibility of the concept has been demonstrated in a series of bench-scale experiments and a preliminary system analysis. Results indicate that sorbent regeneration can be accomplished by applying a 14 C temperature swing, while regenerating at 13 torr (well above the Martian atmospheric pressure), withstanding over 1,000 adsorption/regeneration cycles. This paper presents the latest results from these sorbent and system development efforts.

Astronaut Ronald Evans photographed during transearth coast EVA

Science.gov (United States)

1972-01-01

Astronaut Ronald E. Evans is photographed performing extravehicular activity (EVA) during the Apollo 17 spacecraft's transearth coast. During his EVA Command Module pilot Evans retrieved film cassettes from the Lunar Sounder, Mapping Camera, and Panoramic Camera. The total time for the transearth EVA was one hour seven minutes 19 seconds, starting at ground elapsed time of 257:25 (2:28 p.m.) amd ending at ground elapsed time of 258:42 (3:35 p.m.) on Sunday, December 17, 1972.

A versão de Eva: perspectiva, narrativa e interpretação em A vida de Adão e Eva

Directory of Open Access Journals (Sweden)

Cesar Motta Rios

2009-10-01

Full Text Available Neste artigo, estudo o discurso de Eva em A vida de Adão e Eva, em sua versão grega. Em um primeiro momento, introduzo o tema da mudança de perspectiva a partir de uma obra contemporânea, Vita Brevis de Jostein Gaarder. Em seguida, apresento brevemente o texto com o qual trabalho. Então, abordo o discurso de Eva, observando a maneira como este se insere na narrativa mais ampla. Reflito também sobre como a mudança de perspectiva instaurada no recontar de Eva possibilita uma narrativa na qual contar e interpretar se mesclam, à maneira dos midrashim agádicos.

Injury Risk Assessment of Extravehicular Mobility Unit (EMU) Phase VI and Series 4000 Gloves During Extravehicular Activity (EVA) Hand Manipulation Tasks

Science.gov (United States)

Kilby, Melissa

2015-01-01

Functional Extravehicular Mobility Units (EMUs) with high precision gloves are essential for the success of Extravehicular Activity (EVA). Previous research done at NASA has shown that total strength capabilities and performance are reduced when wearing a pressurized EMU. The goal of this project was to characterize the human-space suit glove interaction and assess the risk of injury during common EVA hand manipulation tasks, including pushing, pinching and gripping objects. A custom third generation sensor garment was designed to incorporate a combination of sensors, including force sensitive resistors, strain gauge sensors, and shear force sensors. The combination of sensors was used to measure the forces acting on the finger nails, finger pads, finger tips, as well as the knuckle joints. In addition to measuring the forces, data was collected on the temperature, humidity, skin conductance, and blood perfusion of the hands. Testing compared both the Phase VI and Series 4000 glove against an ungloved condition. The ungloved test was performed wearing the sensor garment only. The project outcomes identified critical landmarks that experienced higher workloads and are more likely to suffer injuries. These critical landmarks varied as a function of space suit glove and task performed. The results showed that less forces were acting on the hands while wearing the Phase VI glove as compared to wearing the Series 4000 glove. Based on our findings, the engineering division can utilize these methods for optimizing the current space suit glove and designing next generation gloves to prevent injuries and optimize hand mobility and comfort.

EVA1A/TMEM166 Regulates Embryonic Neurogenesis by Autophagy

Directory of Open Access Journals (Sweden)

Mengtao Li

2016-03-01

Full Text Available Self-renewal and differentiation of neural stem cells is essential for embryonic neurogenesis, which is associated with cell autophagy. However, the mechanism by which autophagy regulates neurogenesis remains undefined. Here, we show that Eva1a/Tmem166, an autophagy-related gene, regulates neural stem cell self-renewal and differentiation. Eva1a depletion impaired the generation of newborn neurons, both in vivo and in vitro. Conversely, overexpression of EVA1A enhanced newborn neuron generation and maturation. Moreover, Eva1a depletion activated the PIK3CA-AKT axis, leading to the activation of the mammalian target of rapamycin and the subsequent inhibition of autophagy. Furthermore, addition of methylpyruvate to the culture during neural stem cell differentiation rescued the defective embryonic neurogenesis induced by Eva1a depletion, suggesting that energy availability is a significant factor in embryonic neurogenesis. Collectively, these data demonstrated that EVA1A regulates embryonic neurogenesis by modulating autophagy. Our results have potential implications for understanding the pathogenesis of neurodevelopmental disorders caused by autophagy dysregulation.

Crew Systems for Asteroid Exploration: Concepts for Lightweight & Low Volume EVA Systems

Science.gov (United States)

Mueller, Rob; Calle, Carlos; Mantovani, James

2013-01-01

This RFI response is targeting Area 5. Crew Systems for Asteroid Exploration: concepts for lightweight and low volume robotic and extra-vehicular activity (EVA) systems, such as space suits, tools, translation aids, stowage containers, and other equipment. The NASA KSC Surface Systems Office, Granular Mechanics and Regolith Operations (GMRO) Lab and the Electrostatics & Surface Physics Lab (ESPL) are dedicated to developing technologies for operating in regolith environments on target body surfaces. We have identified two technologies in our current portfolio that are highly relevant and useful for crews that will visit a re-directed asteroid in Cis-Lunar Space. Both technologies are at a high TRL of 5/6 and could be rapidly implemented in time for an ARM mission in this decade.

EVA: Evryscopes for the Arctic and Antarctic

Science.gov (United States)

Richichi, A.; Law, N.; Tasuya, O.; Fors, O.; Dennihy, E.; Carlberg, R.; Tuthill, P.; Ashley, M.; Soonthornthum, B.

2017-06-01

We are planning to build Evryscopes for the Arctic and Antarctic (EVA), which will enable the first ultra-wide-field, high-cadence sky survey to be conducted from both Poles. The system is based on the successful Evryscope concept, already installed and operating since 2015 at Cerro Tololo in Chile with the following characteristics: robotic operation, 8,000 square degrees simultaneous sky coverage, 2-minute cadence, milli-mag level photometric accuracy, pipelined data processing for real-time analysis and full data storage for off-line analysis. The initial location proposed for EVA is the PEARL station on Ellesmere island; later also an antarctic location shall be selected. The science goals enabled by this unique combination of almost full-sky coverage and high temporal cadence are numerous, and include among others ground-breaking forays in the fields of exoplanets, stellar variability, asteroseismology, supernovae and other transient events. The EVA polar locations will enable uninterrupted observations lasting in principle over weeks and months. EVA will be fully robotic. We discuss the EVA science drivers and expected results, and present the logistics and the outline of the project which is expected to have first light in the winter of 2018. The cost envelope can be kept very competitive thanks to R&D already employed for the CTIO Evryscope, to our experience with both Arctic and Antarctic locations, and to the use of off-the-shelf components.

Eva Wohlgemuth / Eva Wohlgemuth ; interv. Tilman Baumgärtel

Index Scriptorium Estoniae

Wohlgemuth, Eva

2006-01-01

1997. a. tehtud intervjuu austria kontseptuaalse kunstniku Eva Wohlgemuthiga (sünd. 1955), kes koos Kathy Rae Huffmaniga dokumenteeris võrgus reisipäevikuna (Interneti projekt "Siberian Deal") sõidu läbi Siberi. Ka projektist "Face Settings". E. Wohlgemuth on loonud varem "Location Sculpture Systems'i" (koos Andreas Baumanniga) ja "Moving Plates Systems'i" ning dokumenteerinud tööd veebisaidil

Reconfigurable Ultra-Low Power Miniaturized EVA Radio, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — EVA radio is an important integral part of lunar missions and beyond. To minimize power consumption and mass of an EVA radio, innovative solutions are needed for the...

European Vegetation Archive (EVA): an integrated database of European vegetation plots

DEFF Research Database (Denmark)

Chytrý, M; Hennekens, S M; Jiménez-Alfaro, B

2015-01-01

vegetation- plot databases on a single software platform. Data storage in EVA does not affect on-going independent development of the contributing databases, which remain the property of the data contributors. EVA uses a prototype of the database management software TURBOVEG 3 developed for joint management......The European Vegetation Archive (EVA) is a centralized database of European vegetation plots developed by the IAVS Working Group European Vegetation Survey. It has been in development since 2012 and first made available for use in research projects in 2014. It stores copies of national and regional...... data source for large-scale analyses of European vegetation diversity both for fundamental research and nature conservation applications. Updated information on EVA is available online at http://euroveg.org/eva-database....

Development of an EVA systems cost model. Volume 2: Shuttle orbiter crew and equipment translation concepts and EVA workstation concept development and integration

Science.gov (United States)

1975-01-01

EVA crewman/equipment translational concepts are developed for a shuttle orbiter payload application. Also considered are EVA workstation systems to meet orbiter and payload requirements for integration of workstations into candidate orbiter payload worksites.

STS-92 Pilot Pam Melroy suits up for launch

Science.gov (United States)

2000-01-01

In the Operations and Checkout Building, STS-92 Pilot Pamela Ann Melroy smiles during suit check before heading out to the Astrovan for the ride to Launch Pad 39A. During the 11-day mission to the International Space Station, four extravehicular activities (EVAs), or spacewalks, are planned for construction. The payload includes the Integrated Truss Structure Z-1 and the third Pressurized Mating Adapter. The Z-1 truss is the first of 10 that will become the backbone of the Space Station, eventually stretching the length of a football field. PMA-3 will provide a Shuttle docking port for solar array installation on the sixth Station flight and Lab installation on the seventh Station flight. Launch is scheduled for 7:17 p.m. EDT. Landing is expected Oct. 22 at 2:10 p.m. EDT.

A Novel Recombinant Enterovirus Type EV-A89 with Low Epidemic Strength in Xinjiang, China.

Science.gov (United States)

Fan, Qin; Zhang, Yong; Hu, Lan; Sun, Qiang; Cui, Hui; Yan, Dongmei; Sikandaner, Huerxidan; Tang, Haishu; Wang, Dongyan; Zhu, Zhen; Zhu, Shuangli; Xu, Wenbo

2015-12-21

Enterovirus A89 (EV-A89) is a novel member of the EV-A species. To date, only one full-length genome sequence (the prototype strain) has been published. Here, we report the molecular identification and genomic characterization of a Chinese EV-A89 strain, KSYPH-TRMH22F/XJ/CHN/2011, isolated in 2011 from a contact of an acute flaccid paralysis (AFP) patient during AFP case surveillance in Xinjiang China. This was the first report of EV-A89 in China. The VP1 coding sequence of this strain demonstrated 93.2% nucleotide and 99.3% amino acid identity with the EV-A89 prototype strain. In the P2 and P3 regions, the Chinese EV-A89 strain demonstrated markedly higher identity than the prototype strains of EV-A76, EV-A90, and EV-A91, indicating that one or more recombination events between EV-A89 and these EV-A types might have occurred. Long-term evolution of these EV types originated from the same ancestor provides the spatial and temporal circumstances for recombination to occur. An antibody sero-prevalence survey against EV-A89 in two Xinjiang prefectures demonstrated low positive rates and low titres of EV-A89 neutralization antibody, suggesting limited range of transmission and exposure to the population. This study provides a solid foundation for further studies on the biological and pathogenic properties of EV-A89.

CETA truck and EVA restraint system

Science.gov (United States)

Beals, David C.; Merson, Wayne R.

1991-01-01

The Crew Equipment Translation Aid (CETA) experiment is an extravehicular activity (EVA) Space Transportation System (STS) based flight experiment which will explore various modes of transporting astronauts and light equipment for Space Station Freedom (SSF). The basic elements of CETA are: (1) two 25 foot long sections of monorail, which will be EVA assembled in the STS cargo bay to become a single 50 ft. rail called the track; (2) a wheeled baseplate called the truck which rolls along the track and can accept three cart concepts; and (3) the three carts which are designated manual, electric, and mechanical. The three carts serve as the astronaut restraint and locomotive interfaces with the track. The manual cart is powered by the astronaut grasping the track's handrail and pulling himself along. The electric cart is operated by an astronaut turning a generator which powers the electric motor and drives the cart. The mechanical cart is driven by a Bendix type transmission and is similar in concept to a man-propelled railroad cart. During launch and landing, the truck is attached to the deployable track by means of EVA removable restraint bolts and held in position by a system of retractable shims. These shims are positioned on the exterior of the rail for launch and landing and rotate out of the way for the duration of the experiment. The shims are held in position by strips of Velcro nap, which rub against the sides of the shim and exert a tailored force. The amount of force required to rotate the shims was a major EVA concern, along with operational repeatability and extreme temperature effects. The restraint system was tested in a thermal-vac and vibration environment and was shown to meet all of the initial design requirements. Using design inputs from the astronauts who will perform the EVA, CETA evolved through an iterative design process and represented a cooperative effort.

EVA: laparoscopic instrument tracking based on Endoscopic Video Analysis for psychomotor skills assessment.

Science.gov (United States)

Oropesa, Ignacio; Sánchez-González, Patricia; Chmarra, Magdalena K; Lamata, Pablo; Fernández, Alvaro; Sánchez-Margallo, Juan A; Jansen, Frank Willem; Dankelman, Jenny; Sánchez-Margallo, Francisco M; Gómez, Enrique J

2013-03-01

The EVA (Endoscopic Video Analysis) tracking system is a new system for extracting motions of laparoscopic instruments based on nonobtrusive video tracking. The feasibility of using EVA in laparoscopic settings has been tested in a box trainer setup. EVA makes use of an algorithm that employs information of the laparoscopic instrument's shaft edges in the image, the instrument's insertion point, and the camera's optical center to track the three-dimensional position of the instrument tip. A validation study of EVA comprised a comparison of the measurements achieved with EVA and the TrEndo tracking system. To this end, 42 participants (16 novices, 22 residents, and 4 experts) were asked to perform a peg transfer task in a box trainer. Ten motion-based metrics were used to assess their performance. Construct validation of the EVA has been obtained for seven motion-based metrics. Concurrent validation revealed that there is a strong correlation between the results obtained by EVA and the TrEndo for metrics, such as path length (ρ = 0.97), average speed (ρ = 0.94), or economy of volume (ρ = 0.85), proving the viability of EVA. EVA has been successfully validated in a box trainer setup, showing the potential of endoscopic video analysis to assess laparoscopic psychomotor skills. The results encourage further implementation of video tracking in training setups and image-guided surgery.

Phase separation and orientation in EVA/polycarbonate

International Nuclear Information System (INIS)

Martins-Franchetti, S.M.; Nunes, S.P.

1988-01-01

Blends of the polycarbonate of bisphenol-A-(PC) with poly(ethylene-co-vinylacetate) (EVA) were prepared by solution casting in different solvents and various proportions. Their behaviours was examined by diferential scanning calorimetry (DSC), X-ray diffraction and u.v. spectrophotometry. The results obtained show that PC and EVA form partially miscible blends. In some cases, birefringence was observed by optical microscopy indicating the occurrence of polymer orientation in the neighbourhood of the interfaces. (author) [pt

Evidence Report: Risk of Hypobaric Hypoxia from the Exploration Atmosphere

Science.gov (United States)

Norcross, Jason R.; Conkin, Johnny; Wessel, James H., III; Norsk, Peter; Law, Jennifer; Arias, Diana; Goodwin, Tom; Crucian, Brian; Whitmire, Alexandra; Bloomberg, Jacob;

Thermal processing of EVA encapsulants and effects of formulation additives

Energy Technology Data Exchange (ETDEWEB)

Pern, F.J.; Glick, S.H. [National Renewable Energy Lab., Golden, CO (United States)

1996-05-01

The authors investigated the in-situ processing temperatures and effects of various formulation additives on the formation of ultraviolet (UV) excitable chromophores, in the thermal lamination and curing of ethylene-vinyl acetate (EVA) encapsulants. A programmable, microprocessor-controlled, double-bag vacuum laminator was used to study two commercial as formulated EVA films, A9918P and 15295P, and solution-cast films of Elvaxrm (EVX) impregnated with various curing agents and antioxidants. The results show that the actual measured temperatures of EVA lagged significantly behind the programmed profiles for the heating elements and were affected by the total thermal mass loaded inside the laminator chamber. The antioxidant Naugard P{trademark}, used in the two commercial EVA formulations, greatly enhances the formation of UV-excitable, short chromophores upon curing, whereas other tested antioxidants show little effect. A new curing agent chosen specifically for the EVA formulation modification produces little or no effect on chromophore formation, no bubbling problems in the glass/EVX/glass laminates, and a gel content of {approximately}80% when cured at programmed 155{degrees}C for 4 min. Also demonstrated is the greater discoloring effect with higher concentrations of curing-generated chromophores.

New Lithium-ion Polymer Battery for the Extravehicular Mobility Unit Suit

Science.gov (United States)

Jeevarajan, J. A.; Darcy, E. C.

2004-01-01

The Extravehicular Mobility Unit (EMU) suit currently has a silver-zinc battery that is 20.5 V and 45 Ah capacity. The EMU's portable life support system (PLSS) will draw power from the battery during the entire period of an EVA. Due to the disadvantages of using the silver-zinc battery in terms of cost and performance, a new high energy density battery is being developed for future use, The new battery (Lithium-ion battery or LIB) will consist of Li-ion polymer cells that will provide power to the EMU suit. The battery design consists of five 8 Ah cells in parallel to form a single module of 40 Ah and five such modules will be placed in series to give a 20.5 V, 40 Ah battery. Charging will be accomplished on the Shuttle or Station using the new LIB charger or the existing ALPS (Air Lock Power Supply) charger. The LIB delivers a maximum of 3.8 A on the average, for seven continuous hours, at voltages ranging from 20.5 V to 16.0 V and it should be capable of supporting transient pulses during start up and once every hour to support PLSS fan and pump operation. Figure 1 shows the placement of the battery in the backpack area of the EMU suit. The battery and cells will undergo testing under different conditions to understand its performance and safety characteristics.

European Vegetation Archive (EVA)

NARCIS (Netherlands)

Chytrý, Milan; Hennekens, S.M.; Jiménez-Alfaro, Borja; Schaminée, J.H.J.; Haveman, Rense; Janssen, J.A.M.

2016-01-01

The European Vegetation Archive (EVA) is a centralized database of European vegetation plots developed by the IAVS Working Group European Vegetation Survey. It has been in development since 2012 and first made available for use in research projects in 2014. It stores copies of national and

Radiation Effects on Mechanical Properties of LDPE/EVA blend

International Nuclear Information System (INIS)

Lee, Chung; Kim, Ki Yup; Im, Don Sun; Ryu, Boo Hyung

2005-01-01

Restricted properties and a limited use of homopolymers alone, have given rise to an exploration of composites, copolymers, blends, etc. Copolymers such as poly(ethylene-co-vinyl acetate) (EVA), poly(ethylene-co-butyl acrylate), poly(ethylene-co-ethyl acrylate) (EEA) have wide usages in different industry. Among the numerous ethylene copolymers, due to its wide range of properties depending on its vinyl acetate content, EVA has become one of the most useful copolymers in the electrical industry as a cable insulator, and in many other industries as a hot melt adhesive, a coating, etc. Several works looked at the influence of gamma rays on polymers. Zhang et al have blended EVA with PE because crosslinked PE has a low flexibility for use as a cable insulation. It was reported that the blend showed have a better elongation, flexibility and heat aging effect than PE, but its hardness and softening point were lower. In this study, the radiation degradation of LDPE/EVA blends as a function of the vinyl acetate contents was investigated by using TGA, gelation and elongation

Spectroscopic, scanning laser OBIC, and I-V/QE characterizations of browned EVA solar cells

Energy Technology Data Exchange (ETDEWEB)

Pern, F.J. [National Renewable Energy Lab., Golden, CO (United States); Eisgruber, I.L. [Materials Research Group, Inc., Wheat Ridge, CO (United States); Micheels, R.H. [Polestar Technologies, Inc., Needham Hts, MA (United States)

1996-05-01

The effects of ethylene-vinyl acetate (EVA) discoloration due to accelerated field or laboratory exposure on the encapsulated silicon (Si) solar cells or EVA/glass laminates were characterized quantitatively by using non-invasive, non-destructive ultraviolet-visible (UV-vis) spectrophotometry, spectrocolorimetry, spectrofluorometry, scanning laser OBIC (optical beam induced current) spectroscopy, and current-voltage (I-V) and quantum efficiency (QE) measurements. The results show that the yellowness index (YI) measured directly over the AR-coated solar cells under the glass superstrate increased from the range of -80 to -90 to the range of -20 to 15 as the EVA changed from clear to brown. The ratio of two fluorescence emission peak areas generally increased from 1.45 to 5.69 as browning increased, but dropped to 4.21 on a darker EVA. For a solar cell with brown EVA in the central region, small-area grating QE measurements and scanning laser OBIC analysis between the brown and clear EVA regions showed that the quantum efficiency loss at 633 nm was 42%-48% of the loss at 488 nm, due to a reduced decrease of transmittance in browned EVA at the longer wavelengths. The portion of the solar cell under the browned EVA showed a decrease of {approximately}36% in efficiency, as compared to the cell efficiency under clear EVA. Transmittance loss at 633 nm was 38% of the loss at 488 nm for a light yellow-brown EVA/glass laminate that showed a small increase of 10 in the yellowness index.

Preparation and Characterization of HDPE/EVA Flat Sheet Membranes by Thermally Induced Phase Separation Method

Directory of Open Access Journals (Sweden)

Zahra Shoeyb

2015-06-01

Full Text Available The adjustment of material composition in fabrication of modified polymeric membrane has been considered the most efficient and easiest method. For this purpose blended membranes of high density polyethylene (HDPE–ethylene vinyl acetate (EVA were prepared by thermally induced phase separation method. The impact of EVA in the presence of diluent on the crystalization temperature was assessed using differential scanning calorimetry (DSC. The obtained results showed that EVA has no significant effect on the crystalization temperature of HDPE. The absorption frequencies at 1248 and 1749 cm-1, respectively, due to C-O and C=O streching vibrations of EVA functional groups, confirmed the existence of EVA in HDPE membrane. The pure water permeability of HDPE/EVA blend was measured and compared with that of neat HDPE membrane. The results showed that an EVA content up to 2.5 wt% raised water permeability considerably and the leafy structure of the membranes contracted and the pure water permeation dropped with higher EVA content. The results of porosity measurement and scanning electronic microscopic (SEM analysis also confirmed these findings. Contact angel measurements and atomic force microscopy (AFM examinations and static absorption of collagen protein on the membrane surfaces revealed that EVA content up to 5 wt% lowered the hydrophobicity of the membrane. By EVA content above 10 wt%, due to the structural alteration on the membrane surface, the contact angel and the collagen absorption on the surface of membrane increased. The measurement of tensile strength showed that with increasing EVA content the mechanical properties of the membranes improved due to interactions of polar groups in EVA.

Analisis Economic Value Added (EVA) dalam Menilai Kinerja Keuangan Perusahaan pada PT. Unilever Indonesia, Tbk.

OpenAIRE

Zulfauzi

2011-01-01

The purpose of this research is to know the financial performance of PT. Unilever Indonesia, Tbk which is measured by Economic Value Added (EVA). Variable which is needed to compute The EVA are Net Profit After Tax (NOPAT), Cost of Capital (CoC), and Economic Value Added (EVA). EVA concept is different with another financial performance instruments. Because in computing EVA, Cost of Capital is included. That’s why accounting profitable company doesn’t mean it has positive EV...

NASA Research Announcement Phase 1 Report and Phase 2 Proposal for the Development of a Power Assisted Space Suit Glove Assembly

Science.gov (United States)

Cadogan, Dave; Lingo, Bob

1996-01-01

In July of 1996, ILC Dover was awarded Phase 1 of a contract for NASA to develop a prototype Power Assisted Space Suit glove to enhance the performance of astronauts during Extra-Vehicular Activity (EVA). This report summarizes the work performed to date on Phase 1, and details the work to be conducted on Phase 2 of the program. Phase 1 of the program consisted of research and review of related technical sources, concept brainstorming, baseline design development, modeling and analysis, component mock-up testing, and test data analysis. ILC worked in conjunction with the University of Maryland's Space Systems Laboratory (SSL) to develop the power assisted glove. Phase 2 activities will focus on the design maturation and the manufacture of a working prototype system. The prototype will be tested and evaluated in conjunction with existing space suit glove technology to determine the performance enhancement anticipated with the implementation of the power assisted joint technology in space suit gloves.

Compiling a Comprehensive EVA Training Dataset for NASA Astronauts

Science.gov (United States)

Laughlin, M. S.; Murry, J. D.; Lee, L. R.; Wear, M. L.; Van Baalen, M.

2016-01-01

Training for a spacewalk or extravehicular activity (EVA) is considered hazardous duty for NASA astronauts. This activity places astronauts at risk for decompression sickness as well as various musculoskeletal disorders from working in the spacesuit. As a result, the operational and research communities over the years have requested access to EVA training data to supplement their studies.

Bagatellid : Maailm / Nele-Eva Steinfeld

Index Scriptorium Estoniae

Steinfeld, Nele-Eva

2009-01-01

Muusikasõnumeid maailmast: Arvo Pärdi Neljanda sümfoonia maailma esiettekanne Los Angeleses. Felix Mendelssohni 200. sünniaastapäeva eel avastati helilooja kadunud teoseid. Esa-Pekka Salonen lahkub Los Angelese Filharmoonikute juurest

TEJAS - TELEROBOTICS/EVA JOINT ANALYSIS SYSTEM VERSION 1.0

Science.gov (United States)

Drews, M. L.

1994-01-01

The primary objective of space telerobotics as a research discipline is the augmentation and/or support of extravehicular activity (EVA) with telerobotic activity; this allows increased emplacement of on-orbit assets while providing for their "in situ" management. Development of the requisite telerobot work system requires a well-understood correspondence between EVA and telerobotics that to date has been only partially established. The Telerobotics/EVA Joint Analysis Systems (TEJAS) hypermedia information system uses object-oriented programming to bridge the gap between crew-EVA and telerobotics activities. TEJAS Version 1.0 contains twenty HyperCard stacks that use a visual, customizable interface of icon buttons, pop-up menus, and relational commands to store, link, and standardize related information about the primitives, technologies, tasks, assumptions, and open issues involved in space telerobot or crew EVA tasks. These stacks are meant to be interactive and can be used with any database system running on a Macintosh, including spreadsheets, relational databases, word-processed documents, and hypermedia utilities. The software provides a means for managing volumes of data and for communicating complex ideas, relationships, and processes inherent to task planning. The stack system contains 3MB of data and utilities to aid referencing, discussion, communication, and analysis within the EVA and telerobotics communities. The six baseline analysis stacks (EVATasks, EVAAssume, EVAIssues, TeleTasks, TeleAssume, and TeleIssues) work interactively to manage and relate basic information which you enter about the crew-EVA and telerobot tasks you wish to analyze in depth. Analysis stacks draw on information in the Reference stacks as part of a rapid point-and-click utility for building scripts of specific task primitives or for any EVA or telerobotics task. Any or all of these stacks can be completely incorporated within other hypermedia applications, or they can be

The Potential of Wearable Sensor Technology for EVA Glove Ergonomic Evaluation

Science.gov (United States)

Reid, Christopher R.; McFarland, Shane; Norcross, Jason R.; Rajulu, Sudhakar

2014-01-01

Injuries to the hands are common among astronauts who train for extravehicular activity (EVA). Many of these injuries refer to the gloves worn during EVA as the root cause. While pressurized, the bladder and outer material of these gloves restrict movement and create pressure points while performing tasks, sometimes resulting in pain, muscle fatigue, abrasions, and occasionally a more severe injury, onycholysis (fingernail delamination). The most common injury causes are glove contact (pressure point/rubbing), ill-fitting gloves, and/or performing EVA tasks in pressurized gloves. A brief review of the Lifetime Surveillance of Astronaut Health's injury database reveals over 57% of the total injuries to the upper extremities during EVA training occurred either to the metacarpophalangeal (MCP) joint, fingernail, or the fingertip. Twenty-five of these injuries resulted in a diagnosis of onycholysis

Acoustic Behavior of Subfloor Lightweight Mortars Containing Micronized Poly (Ethylene Vinyl Acetate) (EVA).

Science.gov (United States)

Brancher, Luiza R; Nunes, Maria Fernanda de O; Grisa, Ana Maria C; Pagnussat, Daniel T; Zeni, Mára

2016-01-15

This paper aims to contribute to acoustical comfort in buildings by presenting a study about the polymer waste micronized poly (ethylene vinyl acetate) (EVA) to be used in mortars for impact sound insulation in subfloor systems. The evaluation method included physical, mechanical and morphological properties of the mortar developed with three distinct thicknesses designs (3, 5, and 7 cm) with replacement percentage of the natural aggregate by 10%, 25%, and 50% EVA. Microscopy analysis showed the surface deposition of cement on EVA, with preservation of polymer porosity. The compressive creep test estimated long-term deformation, where the 10% EVA sample with a 7 cm thick mortar showed the lowest percentage deformation of its height. The impact noise test was performed with 50% EVA samples, reaching an impact sound insulation of 23 dB when the uncovered slab was compared with the 7 cm thick subfloor mortar. Polymer waste addition decreased the mortar compressive strength, and EVA displayed characteristics of an influential material to intensify other features of the composite.

Acoustic Behavior of Subfloor Lightweight Mortars Containing Micronized Poly (Ethylene Vinyl Acetate (EVA

Directory of Open Access Journals (Sweden)

Luiza R. Brancher

2016-01-01

Full Text Available This paper aims to contribute to acoustical comfort in buildings by presenting a study about the polymer waste micronized poly (ethylene vinyl acetate (EVA to be used in mortars for impact sound insulation in subfloor systems. The evaluation method included physical, mechanical and morphological properties of the mortar developed with three distinct thicknesses designs (3, 5, and 7 cm with replacement percentage of the natural aggregate by 10%, 25%, and 50% EVA. Microscopy analysis showed the surface deposition of cement on EVA, with preservation of polymer porosity. The compressive creep test estimated long-term deformation, where the 10% EVA sample with a 7 cm thick mortar showed the lowest percentage deformation of its height. The impact noise test was performed with 50% EVA samples, reaching an impact sound insulation of 23 dB when the uncovered slab was compared with the 7 cm thick subfloor mortar. Polymer waste addition decreased the mortar compressive strength, and EVA displayed characteristics of an influential material to intensify other features of the composite.

Innovative EVA Glove Exoskeleton, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Dexterous performance degradation resulting from donning an extra-vehicular activity (EVA) glove limits the capability of astronauts to perform certain tasks in...

A imagem de Eva : o governo peronista

OpenAIRE

Souza, Renata A. Melki de

2016-01-01

Esta dissertação tem como objetivo a análise da imagem de Eva Perón, entre de 1939 a 1955 e utiliza como fontes de pesquisa a imprensa, brasileira e argentina, e a biografia “A Razão de minha Vida”, publicada em 1951, em Buenos Aires. Outro fim desta pesquisa é questionar qual foi o papel de Eva no regime peronista, qual o foco e o olhar quando se fala da primeira-dama argentina e quais os direcionamentos que levaram a imprensa a ter esta posição, além de mostrar como a Argenti...

Bagatellid : Maailm / Nele-Eva Steinfeld

Index Scriptorium Estoniae

Steinfeld, Nele-Eva

2010-01-01

Muusikasõnumeid maailmast: Paavo Järvi lahkub Cincinnati sümfooniaorkestri peadirigendi ametist. Läti metsosopran Elina Garanca pälvis tunnustust. Seiji Ozawa lahkub kontserdielust kuueks kuuks. Fryderyk Chopini 200nda sünniaastapäeva tähistamisest

Underwater EVA training in the WETF with astronaut Robert L. Stewart

Science.gov (United States)

1983-01-01

Underwater extravehicular activity (EVA) training in the weightless environment training facility (WETF) with astronaut Robert L. Stewart. Stewart is simulating a planned EVA using the mobile foot restraint device and a one-G version of the Canadian-built remote manipulator system.

A evasão no ensino superior brasileiro Higher education institutions' evasion

Directory of Open Access Journals (Sweden)

Roberto Leal Lobo e Silva Filho

2007-12-01

Full Text Available Neste trabalho a evasão nas instituições de educação superior no Brasil é estudada com base em dados oficiais, em que se incluem análises regionais dos índices da evasão anual média e da evasão por tipo de instituição. Verifica-se uma correlação negativa entre os índices de evasão e a demanda por curso. Com vistas a possibilitar comparações, são apresentados dados internacionais que indicam que a evasão no Brasil não difere muito das médias internacionais.In this work, evasion in institutions of higher education is studied, based on official data, including regional analyses of annual mean evasion rates and evasion rates by type of institution. It was verified that there is a negative correlation between evasion rates an demand for undergraduate courses. Comparisons with international data are presented, pointing out that the evasion rates in Brazil do not differ a lot from those of other countries.

Vabariigi presidendi iseseisvuspäeva kõne / Toomas Hendrik Ilves

Index Scriptorium Estoniae

Ilves, Toomas Hendrik, 1953-

2011-01-01

Presidendi kõne Eesti Vabariigi 93. aastapäeva pidulikul kontserdil Estonias 24. veebruaril 2011. aastal. Vt. ka juhtkiri lk. 2: Isetehtud Eesti. Õhtulehes kommenteerivad Rainer Kattel, Olev Remsu, Agu Uudelepp ja Vitali Belobrovtsev. Õhtulehes vt. ka juhtkiri: Vaikne ja rahulik Põhjamaa? Äripäevas vt. ka juhtkiri lk. 2: Rohkem enesekindlust, rohkem eneseusaldust!

Použití ukazatele EVA v konkrétním podniku

Directory of Open Access Journals (Sweden)

Lenka Zemánková

2013-11-01

Full Text Available Purpose of the article: This article is an illustrative case study describing usage of EVA indicator in chosen specific company. Key part of the article deals with application of EVA indicator in company. It consists of procedure how to adjust accounting data into required form and determine weight costs of capital. Then there is calculation of EVA indicator and other indicators based on it. Last part is comparison of results. Methodology/methods: The basic method is case study. Its aim is to demonstrate good understanding or causation explanation of particular example. It takes into account the overall context of the problem. Scientific aim: The objective of the article is to come near to theoretical economic procedures and highlight the problematic areas within the practical application of EVA indicator in the business. Next aim is to emphasize the importance of EVA indicator. Findings: This article illustrates some problematic issues that companies may face while calculating EVA indicator. Czech accounting standards do not correspond with international accounting standard methodology known as IFRS for compiling statements. First difficult area was conversion of assets into net operating assets NOA. Then operating profit is modified in respect of so-called unusual costs and revenues. The next issue in calculation of EVA indicator is stating average weight costs on capital. The last area of problems is the time flow of leasing contracts, value of liabilities arising from them and assessing the lifetime of leased property. Conclusions: The article empirically examined the effectiveness of EVA indicator with regard to its relation to the accounting performance indicators. It was proved that although the company reported financial health within the frame of financial analysis, it gave owners only slightly increasing economic value added. The article points out the need of usege of EVA indicator in corporate practice.

Uso de EVA Modificado com Grupos Mercaptana na Compatibilização de Misturas NBR/EPDM The Use of Mercapto-Modified EVA as Compatibilizing Agent for NBR/EPDM Blends

Directory of Open Access Journals (Sweden)

Marcia G. Oliveira

2002-10-01

Full Text Available Copolímeros de etileno - acetato de vinila com diferentes teores de acetato de vinila - foram funcionalizados com grupos mercaptana e utilizados como agentes compatibilizantes reativos em misturas envolvendo borracha nitrílica e copolímeros de etileno-propileno-dieno (EPDM. Foi investigada a influência das características estruturais dos copolímeros funcionalizados no processo de vulcanização, propriedades mecânicas e dinâmico-mecânicas bem como resistência ao envelhecimento. A adição de pequena porção desses copolímeros resultou em tempos de cura menores. Copolímeros funcionalizados, obtidos a partir da transesterificação de EVA com ácido mercaptoacético (EVASH, apresentaram desempenho melhor como compatibilizante do que aquele obtido a partir da esterificação de EVA hidrolisado com o mesmo ácido (EVALSH. As misturas compatibilizadas com o primeiro sistema apresentaram melhores propriedades mecânicas além de uma morfologia mais refinada e uniforme. A presença dos grupos mercaptana nesses agentes compatibilizantes resultou em uma melhora na resistência ao envelhecimento das misturas.Ethylene-vinyl acetate (EVA copolymers with different amounts of vinyl acetate have been functionalized with mercapto groups and these reactive compounds were used as compatibilizing agent for nitrile rubber (NBR/ ethylene-propylene-diene rubber (EPDM blends. The effects from the structural properties of mercapto-modified EVA compounds on the vulcanizing characteristics, mechanical properties, aging resistance and dynamic-mechanical properties were investigated. The addition of low amounts of mercapto-modified EVA resulted in a decrease of curing time. The functionalized copolymer obtained through transesterification reaction between mercaptoacetic acid and EVA (EVASH presented better compatibilizing action than that obtained from esterification of hydrolyzed EVA and mercaptoacetic acid (EVALSH. Blends compatibilized with the former

Bond-girl Eva Green: "Daniel ei ole sugugi halb" / Eva Green ; ref. Viktoria Ladõnskaja

Index Scriptorium Estoniae

Green, Eva

2006-01-01

Ajakirjanikud vaatasid Londonis uut Bondi-filmi "007 : Casino Royale" ja kohtusid pressikonverentsil peaosatäitjatega. Prantsusmaal elav rootsi-alžeeria päritolu näitlejanna Eva Green räägib oma rollist ja koostööst Bondi-kehastaja Daniel Craigiga

Mechanical behavior of recycled lightweight concrete using EVA waste and CDW under moderate temperature

Directory of Open Access Journals (Sweden)

E. Q. R. Santiago

Full Text Available Many benefits can be achieved by using recycled waste as raw material for construction. Some of them are the reduction of the total cost of the construction, the reduction of the consumption of energy and the decrease in the use of natural materials. The construction sector can also incorporate the waste of the other industries, like the waste of the shoes industry, the Ethylene Vinyl Acetate (EVA. EVA aggregate is obtained by cutting off the waste of EVA expanded sheets used to produce insoles and innersoles of the shoes. In this work two types of recycled aggregate were used - construction and demolition waste (CDW and EVA. The aim of this work was to study the influence of the use of these recycled aggregates, as replacement of the natural coarse aggregate, on mechanical behavior of recycled concrete. The experimental program was developed with two w/c ratio: 0.49 and 0.82. Four mixtures with produced with different aggregates substitution rates (0, 50%EVA, 50%CDW and 25%EVA-25%CDW, by volume. Compressive tests were carried out to evaluable the influence of recycled aggregate on strength, elastic modulus and Poisson coefficient. In addition, it was evaluated the effect of the moderate temperatures (50, 70 and 100º C on stress-strain behavior of concretes studied. The results demonstrated that is possible to use the EVA waste and RCD to produces lightweight concrete. The influence of temperature was more significant only on elastic modulus of the recycled concrete with 50%EVA.

Astronaut Dale Gardner holds up for sale sign after EVA

Science.gov (United States)

1984-01-01

Astronaut Dale A. Gardner, having just completed the major portion of his second extravehicular activity (EVA) period in three days, holds up a 'for sale' sign. Astronaut Joseph P. ALlen IV, who also participated in the two EVA's, is reflected in Gardner's helmet visor. A portion of each of two recovered satellites is in the lower right corner, with Westar nearer Discovery's aft.

Role of EVA viscoelastic properties in the protective performance of a sport shoe: computational studies.

Science.gov (United States)

Even-Tzur, Nurit; Weisz, Ety; Hirsch-Falk, Yifat; Gefen, Amit

2006-01-01

Modern sport shoes are designed to attenuate mechanical stress waves, mainly through deformation of the viscoelastic midsole which is typically made of ethylene vinyl acetate (EVA) foam. Shock absorption is obtained by flow of air through interconnected air cells in the EVA during shoe deformation under body-weight. However, when the shoe is overused and air cells collapse or thickness of the EVA is reduced, shock absorption capacity may be affected, and this may contribute to running injuries. Using lumped system and finite element models, we studied heel pad stresses and strains during heel-strike in running, considering the viscoelastic constitutive behavior of both the heel pad and EVA midsole. In particular, we simulated wear cases of the EVA, manifested in the modeling by reduced foam thickness, increased elastic stiffness, and shorter stress relaxation with respect to new shoe conditions. Simulations showed that heel pad stresses and strains were sensitive to viscous damping of the EVA. Wear of the EVA consistently increased heel pad stresses, and reduced EVA thickness was the most influential factor, e.g., for a 50% reduction in thickness, peak heel pad stress increased by 19%. We conclude that modeling of the heel-shoe interaction should consider the viscoelastic properties of the tissue and shoe components, and the age of the studied shoe.

Utilization of ISS to Develop and Test Operational Concepts and Hardware for Low-Gravity Terrestrial EVA

Science.gov (United States)

Gast, Matthew A.

2010-01-01

NASA has considerable experience in two areas of Extravehicular Activities (EVA). The first can be defined as microgravity, orbital EVAs. This consists of everything done in low Earth orbit (LEO), from the early, proof of concept EVAs conducted during the Gemini program of the 1960s, to the complex International Space Station (ISS) assembly tasks of the first decade of the 21st century. The second area of expertise is comprised of those EVAs conducted on the lunar surface, under a gravitational force one-sixth that of Earth. This EVA expertise encapsulates two extremes - microgravity and Earthlike gravitation - but is insufficient as humans expand their exploration purview, most notably with respect to spacewalks conducted on very low-gravity bodies, such as near- Earth objects (NEO) and the moons of Mars. The operational and technical challenges of this category of EVA have yet to be significantly examined, and as such, only a small number of operational concepts have been proposed thus far. To ensure mission success, however, EVA techniques must be developed and vetted to allow the selection of operational concepts that can be utilized across an assortment of destinations whose physical characteristics vary. This paper examines the utilization of ISS-based EVAs to test operational concepts and hardware in preparation for a low-gravity terrestrial EVA. While the ISS cannot mimic some of the fundamental challenges of a low-gravity terrestrial EVA - such as rotation rate and surface composition - it may be the most effective test bed available.

Next Generation Life Support: High Performance EVA Glove

Science.gov (United States)

Walsh, Sarah K.

2015-01-01

The objectives of the High Performance EVA Glove task are to develop advanced EVA gloves for future human space exploration missions and generate corresponding standards by which progress may be quantitatively assessed. New technologies and manufacturing techniques will be incorporated into the new gloves to address finger and hand mobility, injury reduction and durability in nonpristine environments. Three prototypes will be developed, each focusing on different technological advances. A robotic assist glove will integrate a powered grasping system into the current EVA glove design to reduce astronaut hand fatigue and hand injuries. A mechanical counter pressure (MCP) glove will be developed to further explore the potential of MCP technology and assess its capability for countering the effects of vacuum or low pressure environments on the body by using compression fabrics or materials to apply the necessary pressure. A gas pressurized glove, incorporating new technologies, will be the most flight-like of the three prototypes. Advancements include the development and integration of aerogel insulation, damage sensing components, dust-repellant coatings, and dust tolerant bearings.

Analysis of the mechanical properties and characterization by solid state 13 C NMR of recycled EVA copolymer/silica composites

International Nuclear Information System (INIS)

Stael, Giovanni Chaves; Rocha, Marisa Cristina Guimaraes

2005-01-01

The incorporation of micrometer sized silica particles on poly (ethylene-co-vinyl acetate) - EVA - residues from the footwear industry was evaluated. The effects of the processing parameters - temperature and mixing ratio - on the mechanical behavior of molded plates of neat recycled EVA and EVA/silica composites were also investigated. The mechanical properties measured by the tensile test, the fractographic analysis by scanning electron microscopy (SEM), and the 13 C Nuclear Magnetic Resonance (NMR) showed a reduced EVA to silica compatibility. Therefore, incorporation of untreated silica to recycled EVA copolymer produced a slight decrease on the mechanical performance of EVA/silica composites in respect to neat EVA copolymer. The NMR analysis also shows that the crosslinking process on recycled EVA may be occurring at the carbonyl group. (author)

EV-A71 vaccine licensure: a first step for multivalent enterovirus vaccine to control HFMD and other severe diseases.

Science.gov (United States)

Mao, Qunying; Wang, Yiping; Bian, Lianlian; Xu, Miao; Liang, Zhenglun

2016-07-20

Enteroviruses (EVs) are the most common viral agents in humans. Although most infections are mild or asymptomatic, there is a wide spectrum of clinical manifestations that may be caused by EV infections with varying degrees of severity. Among these viruses, EV-A71 and coxsackievirus (CV) CV-A16 from group A EVs attract the most attention because they are responsible for hand, foot and mouth disease (HFMD). Other EV-A viruses such as CV-A6 and CV-A10 were also reported to cause HFMD outbreaks in several countries or regions. Group B EVs such as CV-B3, CV-B5 and echovirus 30 were reported to be the main pathogens responsible for myocarditis and encephalitis epidemics and were also detected in HFMD patients. Vaccines are the best tools to control infectious diseases. In December 2015, China's Food and Drug Administration approved two inactivated EV-A71 vaccines for preventing severe HFMD.The CV-A16 vaccine and the EV-A71-CV-A16 bivalent vaccine showed substantial efficacy against HFMD in pre-clinical animal models. Previously, research on EV-B group vaccines was mainly focused on CV-B3 vaccine development. Because the HFMD pathogen spectrum has changed, and the threat from EV-B virus-associated severe diseases has gradually increased, it is necessary to develop multivalent HFMD vaccines. This study summarizes the clinical symptoms of diseases caused by EVs, such as HFMD, myocarditis and encephalitis, and the related EV vaccine development progress. In conclusion, developing multivalent EV vaccines should be strongly recommended to prevent HFMD, myocarditis, encephalitis and other severe diseases.

Melting and crystallization behavior of partially miscible high density polyethylene/ethylene vinyl acetate copolymer (HDPE/EVA) blends

Energy Technology Data Exchange (ETDEWEB)

Chen, Yang; Zou, Huawei, E-mail: hwzou@163.com; Liang, Mei, E-mail: liangmeiww@163.com; Cao, Ya

2014-06-01

Highlights: • HDPE/EVA blends undergo phase separation, making it an interesting topic to investigate the relationships between miscibility and crystallization. • Influences from blending on the crystallization kinetics were successfully evaluated by Friedman's and Khanna's method. • X-ray diffraction studies revealed that blending with EVA the unit length of the unit cell of the HDPE increases. • Thermal fractionation method was successfully used to characterize the co-crystallization in HDPE/EVA blends. - Abstract: Crystallization studies on HDPE/EVA blends and the individual components were performed with differential scanning calorimetry (DSC) technique and wide angle X-ray scattering (WAXS). Influences of blending on the crystallization kinetics of each component in HDPE/EVA mixture were evaluated by Friedman's activation energy and Khanna's crystallization rate coefficient (CRC). The addition of more HDPE into the EVA matrix causes more heterogeneous nucleation while the addition of EVA would hinder the nucleation of HDPE at the beginning of cooling process. Inter-molecular interaction in the melt facilitated the crystallization of both EVA and HDPE components. X-ray diffraction studies revealed that HDPE and EVA have orthorhombic unit cell. Blending with EVA did not affect the crystalline structure of HDPE. In addition, a little shift of (1 1 0), (2 0 0) and (0 2 0) crystalline peaks toward lower 2θ values of samples indicating a little increase of unit cell parameters of the orthorhombic unit cell of polyethylene. Thermal fractionation results showed that co-crystallization took place in the HDPE/EVA blend. All those results indicated that the polymer pair we choose was partially miscible.

Analysis of the mechanical properties and characterization by solid state 13C NMR of recycled EVA copolymer/silica composites

Directory of Open Access Journals (Sweden)

Giovanni Chaves Stael

2005-09-01

Full Text Available The incorporation of micrometer sized silica particles on poly (ethylene-co-vinyl acetate - EVA - residues from the footwear industry was evaluated. The effects of the processing parameters - temperature and mixing ratio - on the mechanical behavior of molded plates of neat recycled EVA and EVA/silica composites were also investigated. The mechanical properties measured by the tensile test, the fractographic analysis by scanning electron microscopy (SEM, and the 13C Nuclear Magnetic Resonance (NMR showed a reduced EVA to silica compatibility. Therefore, incorporation of untreated silica to recycled EVA copolymer produced a slight decrease on the mechanical performance of EVA/silica composites in respect to neat EVA copolymer. The NMR analysis also shows that the crosslinking process on recycled EVA may be occurring at the carbonyl group.

EVA Swab Tool to Support Planetary Protection and Astrobiology Evaluations

Science.gov (United States)

Rucker, Michelle A.; Hood, Drew; Walker, Mary; Venkateswaran, Kasthuri J.; Schuerger, Andrew C.

2018-01-01

various pressure environments. To further minimize cost, the design team acquired extensive ground test experience in a relevant flight environment by piggy-backing onto suited crew training runs. These training runs allowed the project to validate tool interfaces with pressurized EVA gloves and collect user feedback on the tool design and function, as well as characterize baseline microbial data for different types of spacesuits. In general, test subjects found the EVA Swab Kit relatively straightforward to operate, but identified a number of design improvements that will be incorporated into the final design. Although originally intended to help characterize human forward contaminants, this tool has other potential applications, such as for collecting and preserving space-exposed materials to support astrobiology experiments.

The Effects of Extravehicular Activity (EVA) Glove Pressure on Hand Strength

Science.gov (United States)

Mesloh, Miranda; England, Scott; Benson, Elizabeth; Thompson, Shelby; Rajulu, Sudhakar

2010-01-01

The purpose of this study was to characterize hand strength, while wearing a Phase VI Extravehicular Activity (EVA) glove in an Extravehicular Mobility Unit (EMU) suit. Three types of data were collected: hand grip, lateral pinch, and pulp-2 pinch, wider three different conditions: bare-handed, gloved with no Thermal Micrometeoroid Garment (TMG), and glove with TMG. In addition, during the gloved conditions, subjects were tested when unpressurized and pressurized (43 psi). As a percentage of bare-hand strength, the TMG condition showed reduction in grip strength to 55% unpressurized and 46% pressurized. Without the TMG, grip strength increased to 66% unpressurized and 58% pressurized of bare-hand strength. For lateral pinch strength, the reduction in strength was the same for both pressure conditions and with and without the TMG, about 8.5% of bare-hand Pulp-2 pinch strength with no TMG showed an increase to 122% unpressurized and 115% pressurized of bare-hand strength. While wearing the TMG, pulp-2 pinch strength was 115% of bare-hand strength for both pressure conditions.

Software Defined Multiband EVA Radio, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The objective of this research is to propose a reliable, lightweight, programmable, multi-band, multi-mode, miniaturized frequency-agile EVA software defined radio...

High Pressure EVA Glove (HPEG), Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Final Frontier Design's (FFD) High Pressure EVA Glove (HPEG) is a game changing technology enabling future exploration class space missions. The high operating...

Valitsuse 100 päeva üllatused / Kadri Jakobson, Piret Reiljan

Index Scriptorium Estoniae

Jakobson, Kadri, 1970-

2007-01-01

Ilmunud ka: Delovõje Vedomosti 18. juuli lk. 2. Aprillirahutuste ohjamine on toonud valitsusele toetuse, aktsiisi- ja hinnatõus aga ennustavad majandusraskusi. Tabel: Valitsuskoalitsiooni lubadused, teod ja peaministri kommentaarid. Vt. samas: Silmapaistvamad 100 päeva ministrid; Valitsuse 100 päeva positiivsed otsused. Vt. samas: Andrus Saar: valitsuse otsused on pannud käima inflatsiooniralli

Software Defined Multiband EVA Radio, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The objective of Phase 2 is to build a reliable, lightweight, programmable, multi-mode, miniaturized EVA Software Defined Radio (SDR) that supports data telemetry,...

Reconfigurable Power-Aware EVA Radio, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Advanced Extra Vehicular Activity (EVA) radio system is a pivotal technology for the successful support of the International Space Station beyond 2020 and future...

Eva Luna: Writing as History

Directory of Open Access Journals (Sweden)

Lynne Diamond-Nigh

1995-01-01

Full Text Available The Bildungsroman of Eva Luna's development as a writer reflects—in a somewhat fragmented manner—important developments in Latin American literary history. Her personal quest was paralleled by an aesthetic quest, manifested in the trying on and taking off of various genres, literary movements and myths characteristic of Latin America; she even goes so far as to allude explicitly to specific authors and their individual works. Although some of these are simply lightheartedly parodied, others are reworked and reinterpreted in the light of the feminist enterprise of the past twenty-five years. Eva Luna transgresses fundamentally by having an intellectually strong, sexual, nurturing, very feminine protagonist, setting up an initial rupture with the dichotomy so clearly demarcated by Octavio Paz between "the mother and the whore." Four primary categories suggest themselves: myth and the mythic consciousness; magical realism; Boom writers; and then a miscellaneous grouping that subsumes a host of other significant literatures and literary themes: the picaresque, the neo-romantic, novels of the dictators, the ever-present conflict between civilization and barbarism, and testimonial literature.

ANALISIS PENGARUH ECONOMIC VALUE ADDED (EVA DAN RASIO KEUANGAN TERHADAP RETURN SAHAM SYARIAH

Directory of Open Access Journals (Sweden)

Lilik Sri Hariani

2010-02-01

Full Text Available This research investigated the simultaneous impact and partial impact of financial ratios (ROA, ROE, EPS and Economic Value-Added (EVA on stock return. One of the four independent variables, that is EVA, are new concepts for measuring financial performance. Explanatory method was used in this research, and the sample was collected using purposive sampling method from Jakarta Islamic Index listed in Bursa Efek Indonesia (BEI, Indonesia Stock Exchange for the period 2005 - 2007. Multiple linear regression was used for the analysis in this research.The result of the analysis shows that all independent variables, that is Return on Assets (ROA, Return on Equity (ROE, Earnings per Share (EPS and EVA have both simultaneous and partial impact on the dependent variable, that is stock return. An interesting finding is that the regression coefficients are different among the variables. ROE and EPS were found to have positive and significant impact on dependent variable while EVA and ROA were found to have negative and significant impact on dependent variable. A positive value for ROE means that the ROE variable can be taken as a measure for a company’s effectivity in utilizing equity in the effort to gain profit. While EPS was found to have the most dominant impact on stock price. The higher the EPS, the greater management’s success in gaining profit for the shareholder or investors. ROA was found to have negative and significant. A finding of this research which is contrary to previous research is that economic value added (EVA was found to have negative and significant impact on stock price. However this finding can be explained as follows: first, the average debt in the companies in the sample is greater than the value of their equity so that EVA will increase due to the reduction in WACC. The increase in EVA is accompanied by a reduction in stock return. Second, positive EVA is not accompanied by any increase of stock performance in the market; and

“PERFORMANCE TREND” AND “PERFORMANCE CURRENT” RATINGS BY ECONOMIC VALUE ADDED (EVA

Directory of Open Access Journals (Sweden)

ALEXANDRU BOGEANU

2013-08-01

Full Text Available The Economic Value Added (EVA is an index of “durable development.” It was proposed by the Stern-Stewart Office and represents the true economic profit of companies. A company reports economic profit only if thereported accounting profit is higher than the opportunity cost of equity. The authors of the EVA model (Stern-Stewart have also proposed the ways of restating the financial statements to get a “fair image” of the results, thuseliminating the “accounting distortions.”Based on the performance indexes calculated based on EVA and second-generation indexes relating toEVA, we calculated two types of rating: Rating Performance Current and Rating Performance Trend. The rating iscalculated by means of the percentiles technique and the results are split into 22 rating classes.The used database is Russell 3000.

Analysis of the mechanical properties and characterization by solid state {sup 13} C NMR of recycled EVA copolymer/silica composites

Energy Technology Data Exchange (ETDEWEB)

Stael, Giovanni Chaves [Observatorio Nacional, Rio de Janeiro, RJ (Brazil)]. E-mail: stael@on.br; Rocha, Marisa Cristina Guimaraes [Universidade do Estado do Rio de Janeiro, Nova Friburgo, RJ (Brazil). Instituto Politecnico; Menezes, Sonia Maria Cabral de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas. Quimica; D' Almeida, Jose Roberto Morais; Ruiz, Naira Machado da Silva [Pontificia Universidade Catolica do Rio de Janeiro, RJ (Brazil)

2005-07-15

The incorporation of micrometer sized silica particles on poly (ethylene-co-vinyl acetate) - EVA - residues from the footwear industry was evaluated. The effects of the processing parameters - temperature and mixing ratio - on the mechanical behavior of molded plates of neat recycled EVA and EVA/silica composites were also investigated. The mechanical properties measured by the tensile test, the fractographic analysis by scanning electron microscopy (SEM), and the {sup 13} C Nuclear Magnetic Resonance (NMR) showed a reduced EVA to silica compatibility. Therefore, incorporation of untreated silica to recycled EVA copolymer produced a slight decrease on the mechanical performance of EVA/silica composites in respect to neat EVA copolymer. The NMR analysis also shows that the crosslinking process on recycled EVA may be occurring at the carbonyl group. (author)

SUIT

DEFF Research Database (Denmark)

Algreen-Ussing, Gregers; Wedebrunn, Ola

2003-01-01

Leaflet om project SUIT udgivet af European Commission. Tryksagen forklarer i korte ord resultatet af projektet SUIT. Kulturværdier i Miljøspørgsmål. Vurdering af projekter og indvirkning på miljø....

Shape Memory Bio-Suit, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Spacesuit systems for planetary EVAs must maximize human productivity and provide the astronaut with the capability to perform useful work tasks. Mide plans to work...

Dynamics, control and sensor issues pertinent to robotic hands for the EVA retriever system

Science.gov (United States)

Mclauchlan, Robert A.

1987-01-01

Basic dynamics, sensor, control, and related artificial intelligence issues pertinent to smart robotic hands for the Extra Vehicular Activity (EVA) Retriever system are summarized and discussed. These smart hands are to be used as end effectors on arms attached to manned maneuvering units (MMU). The Retriever robotic systems comprised of MMU, arm and smart hands, are being developed to aid crewmen in the performance of routine EVA tasks including tool and object retrieval. The ultimate goal is to enhance the effectiveness of EVA crewmen.

Compósitos à base de gesso com resíduos de EVA e vermiculita Gypsum-based composites with EVA waste and vermiculite

Directory of Open Access Journals (Sweden)

Marilia P. de Oliveira

2012-06-01

Full Text Available O gesso é um dos materiais de construção mais antigos de que se tem conhecimento. Algumas de suas propriedades lhes conferem vantagens, tais como resistência ao fogo e isolamentos térmico e acústico. Objetivou-se, com este trabalho, avaliar as propriedades físico-mecânicas de compósitos à base de gesso com a incorporação de resíduos da indústria de calçados, o etileno acetato de vinila (EVA e a vermiculita. O desenvolvimento desses compósitos tem como propósito a produção de elementos de revestimento para proteção térmica de alvenarias. Para determinar a influência dos teores de resíduo de EVA e vermiculita e da relação água/gesso nas propriedades massa específica aparente e nas resistências a flexão e a compressão, foram incorporados cinco diferentes percentuais desses materiais, combinados com três relações água/gesso. Os resultados foram analisados por meio da estatística multivariável e indicaram que a massa específica aparente de ambos os compósitos e a resistência à flexão do compósito com vermiculita, mostraram maior dependência da relação água/gesso; por sua vez, o percentual de agregado apresentou maior influência na resistência à flexão do compósito com EVA e na resistência a compressão de ambos os compósitos.Gypsum is one of the oldest known building materials. Some of its properties confer advantages such as fire resistance, thermal and acoustic insulation. This work aims to study the physical and mechanical properties of gypsum-based composite with the incorporation of residues from the footwear industry ethylene vinyl acetate (EVA and vermiculite. The aim to develop these composites is to produce components for thermal protection of masonry. To determine the influence of different residue levels of EVA and vermiculite, and the water/plaster ratio on the bulk density, flexural and compressive strength, five different percentages of these materials were incorporated combined with

¿Es el EVA, realmente, un indicador del valor económico agregado? ¿Es el EVA, realmente, un indicador del valor económico agregado?

Directory of Open Access Journals (Sweden)

Hernán Herrera Echeverry

2006-12-01

Full Text Available In this article we analyze the relevance of EVA (Economic Value Added as a tool for measuring value added, as well as its usefulness as an indicator in choosing investment projects.  First, we show five ways of calculating EVA, providing examples of each case. Second, we show MVA (Market Value Added and NPV (Net Present Value to be equivalent as criteria used to evaluate investment projects.  This is done with both the limited term and the perpetual cases, as well as for projects with partial and total recovery of the investment.We present a thorough analysis, showing the possibilities and limitations of EVA as a value added measure.  We also introduce three measurements of residual income, CVA (Cash Value Added, Cash Flow Return on Investment (CFROI and Economic Profit (EP, which complement EVA in the value measurement process. Finally, we introduce an example that explicitly shows the equivalence between CVA’s present value, MVA and NPV.En este artículo se hace un análisis sobre la validez del EVA (Economic ValueAdded como una medida del valor generado, y de su utilidad para la evaluaciónde proyectos de inversión. Primero se muestran varias formas de calcular el EVA,haciendo ejercicios ilustrativos en cada caso, posteriormente se establece laequivalencia entre el MVA (Market Value Added y el VPN (valor presente netocomo criterios para la evaluación de proyectos de inversión finitos y perpetuos conrecuperación parcial y total de la inversión.Se realiza un examen crítico mostrando las limitaciones y posibilidades del EVAcomo medida de valor económico agregado, y se plantea la utilidad de indicadoresde ingreso residual para complementar al EVA como criterios de medición de valor,tales son el CVA (Cash Value Added, TRFC (tasa de retorno del flujo de caja yUtilidad Económica (UE. Finalmente, se hace un ejemplo en donde se explicitacómo el valor presente del CVA coincide con el MVA y el VPN.

Tectonic contact beetwen Paleozoic and Triassic rocks south of Podolševa (Slovenia

Directory of Open Access Journals (Sweden)

Bogomir Celarc

2002-12-01

Full Text Available Tectonic contact between Paleozoic and Triassic rocks south of Podolševa, which passes prominent cliffs over the left bank of Savinja river (Klemenča peč, Jamnikova peč, Golerjeva peč, Strevčeva peč and Huda peč, is on the basis of the new mapping a steep fault, dipping to the north. In the last phase, the fault was dextral strike – slip active, before was probably reverse, and can represent accompanying structure of Periadriatic lineament. It was under transpresive tectonic regime and complies with model of positive flower structure.We named it Podol{evski prelom (Podol{eva fault.

Spaceborne construction and operations planning - Decision rules for selecting EVA, telerobot, and combined work-systems

Science.gov (United States)

Smith, Jeffrey H.

1992-01-01

An approach is presented for selecting an appropriate work-system for performing construction and operations tasks by humans and telerobots. The decision to use extravehicular activity (EVA) performed by astronauts, extravehicular robotics (EVR), or a combination of EVA and EVR is determined by the ratio of the marginal costs of EVA, EVR, and IVA. The approach proposed here is useful for examining cost trade-offs between tasks and performing trade studies of task improvement techniques (human or telerobotic).

EVA reactive blending with Si–H terminated polysiloxane by carbonyl hydrosilylation reaction: From compatibilised blends to crosslinking networks

International Nuclear Information System (INIS)

Bonnet, J.; Bounor-Legaré, V.; Alcouffe, P.; Cassagnau, P.

2012-01-01

A new and original method based on carbonyl hydrosilylation was developed to prepare ethylene-vinyl acetate (EVA)/polysiloxane polymer blends. This focused on the addition of hydrogenosilane groups (SiH) from polysiloxane to the carbonyl groups of EVA. The influence of the nature of the polysiloxane on blend properties was investigated by rheology and scanning electron microscopy. Mixing of a low viscosity polysiloxane with a high viscosity EVA matrix produced a two-phase morphology. The occurrence of the hydrosilylation reaction at the EVA/polysiloxane interface promoted a homogenisation of the blend depending on the molar ratio SiH/vinyl acetate groups, [SiH]/[VA], and the viscosity ratio of the blend. Two distinct behaviours were observed. The formation of a crosslinked network under shear was obtained for a low viscosity ratio between polysiloxane and EVA (λ polysiloxane/EVA = 4.0 × 10 −6 ) with a high concentration of SiH groups ([SiH]/[VA] = 0.5), while the formation of a compatibilised blend was observed for high molar mass polysiloxanes (Mn > 15,000 g mol −1 ) with a low concentration of SiH ([SiH]/[VA] −3 ). -- Highlights: ► Carbonyl hydrosilylation reaction was found to enhance EVA/polysiloxane immiscible blends. ► EVA crosslinking was obtained with a low molar mass polysiloxane. ► EVA compatibilisation was obtained with a high molar mass polysiloxane. ► Shear rate was found to improve the hydrosilylation reaction at the interface. ► A two-phase morphology of the blends was observed after reaction with fine polysiloxane nodules.

Z-2 Suit Support Stand and MKIII Suit Center of Gravity Test

Science.gov (United States)

Nguyen, Tuan Q.

2014-01-01

NASA's next generation spacesuits are the Z-Series suits, made for a range of possible exploration missions in the near future. The prototype Z-1 suit has been developed and assembled to incorporate new technologies that has never been utilized before in the Apollo suits and the Extravehicular Mobility Unit (EMU). NASA engineers tested the Z-1 suit extensively in order to developed design requirements for the new Z-2 suit. At the end of 2014, NASA will be receiving the new Z-2 suit to perform more testing and to further develop the new technologies of the suit. In order to do so, a suit support stand will be designed and fabricated to support the Z-2 suit during maintenance, sizing, and structural leakage testing. The Z-2 Suit Support Stand (Z2SSS) will be utilized for these purposes in the early testing stages of the Z-2 suit.

Comparison Of Human Modelling Tools For Efficiency Of Prediction Of EVA Tasks

Science.gov (United States)

Dischinger, H. Charles, Jr.; Loughead, Tomas E.

1998-01-01

Construction of the International Space Station (ISS) will require extensive extravehicular activity (EVA, spacewalks), and estimates of the actual time needed continue to rise. As recently as September, 1996, the amount of time to be spent in EVA was believed to be about 400 hours, excluding spacewalks on the Russian segment. This estimate has recently risen to over 1100 hours, and it could go higher before assembly begins in the summer of 1998. These activities are extremely expensive and hazardous, so any design tools which help assure mission success and improve the efficiency of the astronaut in task completion can pay off in reduced design and EVA costs and increased astronaut safety. The tasks which astronauts can accomplish in EVA are limited by spacesuit mobility. They are therefore relatively simple, from an ergonomic standpoint, requiring gross movements rather than time motor skills. The actual tasks include driving bolts, mating and demating electric and fluid connectors, and actuating levers; the important characteristics to be considered in design improvement include the ability of the astronaut to see and reach the item to be manipulated and the clearance required to accomplish the manipulation. This makes the tasks amenable to simulation in a Computer-Assisted Design (CAD) environment. For EVA, the spacesuited astronaut must have his or her feet attached on a work platform called a foot restraint to obtain a purchase against which work forces may be actuated. An important component of the design is therefore the proper placement of foot restraints.

Improved crystallinity and dynamic mechanical properties of reclaimed waste tire rubber/EVA blends under the influence of electron beam irradiation

Science.gov (United States)

Ramarad, Suganti; Ratnam, Chantara T.; Khalid, Mohammad; Chuah, Abdullah Luqman; Hanson, Svenja

2017-01-01

Dependence on automobiles has led to a huge amount of waste tires produced annually around the globe. In this study, the feasibility of recycling these waste tires by blending reclaimed waste tire rubber (RTR) with poly(ethylene-co-vinyl acetate) (EVA) and electron beam irradiation was studied. The RTR/EVA blends containing 100-0 wt% of RTR were prepared in the internal mixer followed by electron beam (EB) irradiation with doses ranging from 50 to 200 kGy. The processing torques, calorimetric and dynamic mechanical properties of the blends were studied. Blends were found to have lower processing torque indicating easier processability of RTR/EVA blends compared to EVA. RTR domains were found to be dispersed in EVA matrix, whereas, irradiation improved the dispersion of RTR into smaller domains in EVA matrix. Results showed the addition of EVA improves the efficiency of irradiation induced crosslink formation and dynamic mechanical properties of the blends at the expense of the calorimetric properties. Storage and loss modulus of 50 wt% RTR blend was higher than RTR and EVA, suggesting partial miscibility of the blend. Whereas, electron beam irradiation improved the calorimetric properties and dynamic mechanical properties of the blends through redistribution of RTR in smaller domain sizes within EVA.

All about Eve. Eva Hesse and the Post-Minimalist Romantic Irony

Directory of Open Access Journals (Sweden)

Szymański, Wojciech

2014-03-01

Full Text Available The article employs the category of Romantic irony for an interpretation of Eva Hesse's work. It takes as its starting point one of Arthur Danto's texts, where the American philosopher makes a positive re-evaluation of the artist's work, and reads it as a largely humorous combination of two – seemingly incongruent – traditions of American art of the 20thcentury: Abstract Expressionism and Minimalism. Features that Danto finds humorous, the author of the present article considers exemplary of Romantic irony, an approach that he finds in Eva Hesse's oeuvre. In the second part of the article, two competing interpretations of Eva Hesse's work are presented: Robert Pincus-Witten's and Lucy R. Lippard's. However, with the use of the notion of Romantic irony their standpoints can be reconciled, with a simultaneous indication of a previously dismissed, yet crucial, ironic aspect of the work of the American artist.

Extravehicular Activity and Planetary Protection

Science.gov (United States)

Buffington, J. A.; Mary, N. A.

2015-01-01

The first human mission to Mars will be the farthest distance that humans have traveled from Earth and the first human boots on Martian soil in the Exploration EVA Suit. The primary functions of the Exploration EVA Suit are to provide a habitable, anthropometric, pressurized environment for up to eight hours that allows crewmembers to perform autonomous and robotically assisted extravehicular exploration, science/research, construction, servicing, and repair operations on the exterior of the vehicle, in hazardous external conditions of the Mars local environment. The Exploration EVA Suit has the capability to structurally interface with exploration vehicles via next generation ingress/egress systems. Operational concepts and requirements are dependent on the mission profile, surface assets, and the Mars environment. This paper will discuss the effects and dependencies of the EVA system design with the local Mars environment and Planetary Protection. Of the three study areas listed for the workshop, EVA identifies most strongly with technology and operations for contamination control.

Vabariigi aastapäeva tähistamisest Hamiltonis

Index Scriptorium Estoniae

2009-01-01

EV 91. aastapäeva tähistas Hamiltoni Eesti Võitlejate Ühing, Hamiltoni Eesti Pensionäride Klubi; Hamiltoni eesti organisatsioonid korraldasid aktuse, mille peakõneleja oli Eesti Sihtkapital Kanadas esinaine Lia Hess

Context-aware recommender system based on ontology for recommending tourist destinations at Bandung

Science.gov (United States)

Rizaldy Hafid Arigi, L.; Abdurahman Baizal, Z. K.; Herdiani, Anisa

2018-03-01

Recommender System is software that is able to provide personalized recommendation suits users’ needs. Recommender System has been widely implemented in various domains, including tourism. One approach that can be done for more personalized recommendations is the use of contextual information. This paper proposes a context aware recommender based ontology system in the tourism domain. The system is capable of recommending tourist destinations by using user preferences of the categories of tourism and contextual information such as user locations, weather around tourist destinations and close time of destination. Based on the evaluation, the system has accuracy of of 0.94 (item recommendation precision evaluated by expert) and 0.58 (implicitly from system-end user interaction). Based on the evaluation of user satisfaction, the system provides a satisfaction level of more than 0.7 (scale 0 to 1) for speed factors for providing liked recommendations (PE), informative description of recommendations (INF) and user trust (TR).

High-Pressure Oxygen Generation for Outpost EVA Study

Science.gov (United States)

Jeng, Frank F.; Conger, Bruce; Ewert, Michael K.; Anderson, Molly S.

2009-01-01

The amount of oxygen consumption for crew extravehicular activity (EVA) in future lunar exploration missions will be significant. Eight technologies to provide high pressure EVA O2 were investigated. They are: high pressure O2 storage, liquid oxygen (LOX) storage followed by vaporization, scavenging LOX from Lander followed by vaporization, LOX delivery followed by sorption compression, water electrolysis followed by compression, stand-alone high pressure water electrolyzer, Environmental Control and Life Support System (ECLSS) and Power Elements sharing a high pressure water electrolyzer, and ECLSS and In-Situ Resource Utilization (ISRU) Elements sharing a high pressure electrolyzer. A trade analysis was conducted comparing launch mass and equivalent system mass (ESM) of the eight technologies in open and closed ECLSS architectures. Technologies considered appropriate for the two architectures were selected and suggested for development.

THE APPLICATION OF THE METHOD ENVIRONMENTAL VALUE AT RISK (EVaR IN ENVIRONMENTAL ECONOMY

Directory of Open Access Journals (Sweden)

Gabriela Cornelia I. PICIU

2014-04-01

Full Text Available Taking into account the fact that the methodology Value at Risk or the method VaR, which is omnipresent in investment banking and which has lately become a standard in the procedure of evaluating risks for any category of economic activities, we shall use a technique that is compatible with the VaR-market, called Environmental Value at Risk or EvaR. While the VaR- market uses a level of trust of 95%, the EvaR uses a set of levels up to 99,999%. Thus, we shall try to analyze the variables of the method EVaR, and the way in which this model can be applied as a risk of the lack (rarity of petroleum. This risk is not only analyzed as a unique risk of growing the prices, but also as an uncertainty risk on volatile markets, in which the price and the volatility are the main variables used by the function EVaR.

Commercial Spacewalking: Designing an EVA Qualification Program for Space Tourism

Science.gov (United States)

Gast, Matthew A.

2010-01-01

In the near future, accessibility to space will be opened to anyone with the means and the desire to experience the weightlessness of microgravity, and to look out upon both the curvature of the Earth and the blackness of space, from the protected, shirt-sleeved environment of a commercial spacecraft. Initial forays will be short-duration, suborbital flights, but the experience and expertise of half a century of spaceflight will soon produce commercial vehicles capable of achieving low Earth orbit. Even with the commercial space industry still in its infancy, and manned orbital flight a number of years away, there is little doubt that there will one day be a feasible and viable market for those courageous enough to venture outside the vehicle and into the void, wearing nothing but a spacesuit, armed with nothing but preflight training. What that Extravehicular Activity (EVA) preflight training entails, however, is something that has yet to be defined. A number of significant factors will influence the composition of a commercial EVA training program, but a fundamental question remains: 'what minimum training guidelines must be met to ensure a safe and successful commercial spacewalk?' Utilizing the experience gained through the development of NASA's Skills program - designed to qualify NASA and International Partner astronauts for EVA aboard the International Space Station - this paper identifies the attributes and training objectives essential to the safe conduct of an EVA, and attempts to conceptually design a comprehensive training methodology meant to represent an acceptable qualification standard.

Changes in the EV-A71 Genome through Recombination and Spontaneous Mutations: Impact on Virulence

Directory of Open Access Journals (Sweden)

Madiiha Bibi Mandary

2018-06-01

Full Text Available Enterovirus 71 (EV-A71 is a major etiological agent of hand, foot and mouth disease (HFMD that mainly affects young children less than five years old. The onset of severe HFMD is due to neurological complications bringing about acute flaccid paralysis and pulmonary oedema. In this review, we address how genetic events such as recombination and spontaneous mutations could change the genomic organization of EV-A71, leading to an impact on viral virulence. An understanding of the recombination mechanism of the poliovirus and non-polio enteroviruses will provide further evidence of the emergence of novel strains responsible for fatal HFMD outbreaks. We aim to see if the virulence of EV-A71 is contributed solely by the presence of fatal strains or is due to the co-operation of quasispecies within a viral population. The phenomenon of quasispecies within the poliovirus is discussed to reflect viral fitness, virulence and its implications for EV-A71. Ultimately, this review gives an insight into the evolution patterns of EV-A71 by looking into its recombination history and how spontaneous mutations would affect its virulence.

Synergistic effects of EB irradiation and heat on EVA electrical insulators

International Nuclear Information System (INIS)

Jipa, S.; Zaharescu, T.; Marcuta, M.; Setnescu, R.; Gorghiu, L.M.; Dumitrescu, C.

2005-01-01

Radiation/thermal degradation is discussed as a successful endurance check. EVA samples were subjected to electron beam irradiation at 12, 30, 60 and 90kGy. Heat treatment was performed in air at 120 o C for 72h and 120h. Chemiluminescence (CL) investigations on EVA specimens were carried out at 200, 210 and 220 o C. Several kinetic parameters such as oxidation induction time (t i ), half-oxidation time (t 1/2 ), maximum oxidation rate (v ox max ), maximum time of thermal oxidation (t max ) and other chemiluminescence features were obtained from the time dependencies of the CL intensity. While the ageing factors of processed EVA samples reveal a constant value for two testing temperatures (200 and 210 o C), the co-operative factors that describe a combined (synergistic) degradation present higher than unity values, either for the oxidation rates or for the maximum CL intensity measured for all irradiation doses. They increase linearly with dose

Synergistic effects of EB irradiation and heat on EVA electrical insulators

Energy Technology Data Exchange (ETDEWEB)

Jipa, S [' Valachia' University of Ta-hat rgoviste, Faculty of Sciences, 1 Carol I Av., Targoviste (Romania); Advanced Research Institute for Electrical Engineering, 313 Splaiul Unirii, Bucharest 030138 (Romania); Zaharescu, T [Advanced Research Institute for Electrical Engineering, 313 Splaiul Unirii, Bucharest 030138 (Romania); Marcuta, M [ICPE ELECTROSTATICA, 313 Splaiul Unirii, Bucharest 030138 (Romania); Setnescu, R [' Valachia' University of Ta-hat rgoviste, Faculty of Sciences, 1 Carol I Av., Targoviste (Romania); Gorghiu, L M [' Valachia' University of Targoviste, Faculty of Sciences, 1 Carol I Av., Ta-hat rgoviste (Romania); Dumitrescu, C [' Valachia' University of Targoviste, Faculty of Sciences, 1 Carol I Av., Targoviste (Romania)

2005-07-01

Radiation/thermal degradation is discussed as a successful endurance check. EVA samples were subjected to electron beam irradiation at 12, 30, 60 and 90kGy. Heat treatment was performed in air at 120{sup o}C for 72h and 120h. Chemiluminescence (CL) investigations on EVA specimens were carried out at 200, 210 and 220{sup o}C. Several kinetic parameters such as oxidation induction time (t{sub i}), half-oxidation time (t{sub 1/2}), maximum oxidation rate (v{sub ox}{sup max}), maximum time of thermal oxidation (t{sub max}) and other chemiluminescence features were obtained from the time dependencies of the CL intensity. While the ageing factors of processed EVA samples reveal a constant value for two testing temperatures (200 and 210{sup o}C), the co-operative factors that describe a combined (synergistic) degradation present higher than unity values, either for the oxidation rates or for the maximum CL intensity measured for all irradiation doses. They increase linearly with dose.

Kodundust tuleks õpetada teisiti / Tiina Päeva

Index Scriptorium Estoniae

Päeva, Tiina

2001-01-01

Tiina Päeva 2000. a. läbi viidud uurimistööst "Eesti noorte kodumajanduslikud oskused ja teadmised - nende tähtsus, allikad ning seotus kodumajanduse õpetamisega", milles huvitas autorit, kuidas suhtuvad Eesti noored poistele kodunduse õpetamisse ning mida Eesti noored kodumajandusest kui õppeainest arvavad

Insight into a Pedagogical Sketchbook. Life and work of Eva Eyquem

OpenAIRE

Richter, Sabine

2016-01-01

Die vorliegende Arbeit dokumentiert und kontextualisiert das Werk der französischen Kunstpädagogin und ehemaligen Itten-Schülerin Eva Eyquem, geb. Plaut (1915-2009). Es ist meine Absicht, ihr Werk für Forschung und Lehre zugänglich zu machen und für einen kunstpädagogischen Diskurs zu öffnen, der sich mit Positionen in der Nachfolge der Bauhaus-Pädagogik befasst. Meine Arbeit ist in zwei Teile gegliedert. Sie umfasst eine Monografie zu Eva Eyquem, sowie eine fachwissenschaftliche Reflexion, i...

SELENE - Self-Forming Extensible Lunar EVA Network, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The Lunar EVA network will exhibit a wide range of connectivity levels due to the challenging communications environment and mission dynamics. Disruption-Tolerant...

EVA Development and Verification Testing at NASA's Neutral Buoyancy Laboratory

Science.gov (United States)

Jairala, Juniper C.; Durkin, Robert; Marak, Ralph J.; Sipila, Stepahnie A.; Ney, Zane A.; Parazynski, Scott E.; Thomason, Arthur H.

2012-01-01

As an early step in the preparation for future Extravehicular Activities (EVAs), astronauts perform neutral buoyancy testing to develop and verify EVA hardware and operations. Neutral buoyancy demonstrations at NASA Johnson Space Center's Sonny Carter Training Facility to date have primarily evaluated assembly and maintenance tasks associated with several elements of the International Space Station (ISS). With the retirement of the Shuttle, completion of ISS assembly, and introduction of commercial players for human transportation to space, evaluations at the Neutral Buoyancy Laboratory (NBL) will take on a new focus. Test objectives are selected for their criticality, lack of previous testing, or design changes that justify retesting. Assembly tasks investigated are performed using procedures developed by the flight hardware providers and the Mission Operations Directorate (MOD). Orbital Replacement Unit (ORU) maintenance tasks are performed using a more systematic set of procedures, EVA Concept of Operations for the International Space Station (JSC-33408), also developed by the MOD. This paper describes the requirements and process for performing a neutral buoyancy test, including typical hardware and support equipment requirements, personnel and administrative resource requirements, examples of ISS systems and operations that are evaluated, and typical operational objectives that are evaluated.

Efeito da compatibilização da mistura NBR/EVA sobre sua morfologia de fase co-contínua Effect of the compatibilization of NBR/EVA blends on co-continuous morphology

Directory of Open Access Journals (Sweden)

Bluma G. Soares

2003-01-01

Full Text Available O objetivo deste trabalho foi investigar a influência do poli (etileno-co-acetato de vinila funcionalizado com grupos mercaptana (EVALSH nas propriedades reológicas, morfológicas e dinamico-mecânicas de misturas envolvendo borracha nitrílica (NBR e copolímero de etileno - acetato de vinila (EVA. Experiências envolvendo extração seletiva da fase NBR associadas à análise de microscopia eletrônica de varredura indicaram que estruturas do tipo co-contínuas são formadas em uma faixa de composição de 30 a 60 % em massa de EVA. A adição de EVALSH não afetou esta faixa de co-continuidade, porém deslocou o limiar de percolação para menores teores de EVA. Este comportamento foi mais pronunciado em misturas ricas em NBR. A faixa de co-continuidade também foi evidenciada a partir de análise dinamico-mecânica. Dados reológicos revelaram também que a adição de EVALSH aumentou a viscosidade do sistema para misturas ricas em NBR.The influence of ethylene-vinyl acetate copolymer functionalized with mercapto groups (EVALSH on rheological, morphological and dynamic mechanical properties of nitrilic rubber (NBR/ ethylene - vinyl acetate copolymer (EVA blends has been investigated. Selective extraction experiments of NBR phase and scanning electron micrography suggest that co-continuous morphologies were formed in a range of blend compositions from 30 to 60 wt% of EVA. The addition of EVALSH did not affect the co-continuous range but shifted the percolation threshold of NBR-richer blends towards lower amount of EVA. The co-continuous range was also evidenced by dynamic mechanical analysis. Rheological data also revealed that the presence of EVALSH increased the viscosity of the blends containing higher amounts of NBR.

Investigation of test methods, material properties, and processes for solar cell encapsulants. Fourteenth quarterly progress report, August 12, 1978-November 12, 1979. [EVA, EPDM, aliphatic urethane, PVC plastisol, and butyl acrylate

Energy Technology Data Exchange (ETDEWEB)

Willis, P. B.; Baum, B.; Schnitzer, H. S.

1979-12-01

Springborn Laboratories is engaged in a study of evaluating potentially useful encapsulating materials for Task 3 of the Low-Cost Silicon Solar Array project (LSA) funded by DOE. The goal of this program is to identify, evaluate, and recommend encapsulant materials and processes for the production of cost-effective, long-life solar cell modules. This report presents the results of a cost analysis of candidate potting compounds for long life solar module encapsulation. Additionally, the two major encapsulation processes, sheet lamination and liquid casting, are costed on the basis of a large scale production facility. Potting compounds studied include EVA, sheet, clear; EVA, sheet, pigmented; EPDM, sheet, clear; Aliphatic urethane, syrup; PVC Plastisol; Butyl acrylate, syrup; and Butyl acrylate, sheet.

Easy Volcanic Aerosol (EVA v1.0: an idealized forcing generator for climate simulations

Directory of Open Access Journals (Sweden)

M. Toohey

2016-11-01

Full Text Available Stratospheric sulfate aerosols from volcanic eruptions have a significant impact on the Earth's climate. To include the effects of volcanic eruptions in climate model simulations, the Easy Volcanic Aerosol (EVA forcing generator provides stratospheric aerosol optical properties as a function of time, latitude, height, and wavelength for a given input list of volcanic eruption attributes. EVA is based on a parameterized three-box model of stratospheric transport and simple scaling relationships used to derive mid-visible (550 nm aerosol optical depth and aerosol effective radius from stratospheric sulfate mass. Precalculated look-up tables computed from Mie theory are used to produce wavelength-dependent aerosol extinction, single scattering albedo, and scattering asymmetry factor values. The structural form of EVA and the tuning of its parameters are chosen to produce best agreement with the satellite-based reconstruction of stratospheric aerosol properties following the 1991 Pinatubo eruption, and with prior millennial-timescale forcing reconstructions, including the 1815 eruption of Tambora. EVA can be used to produce volcanic forcing for climate models which is based on recent observations and physical understanding but internally self-consistent over any timescale of choice. In addition, EVA is constructed so as to allow for easy modification of different aspects of aerosol properties, in order to be used in model experiments to help advance understanding of what aspects of the volcanic aerosol are important for the climate system.

KIK pidas sünnipäeva / Endrik Tõnsberg

Index Scriptorium Estoniae

Tõnsberg, Endrik

2005-01-01

11. mail 2005. a. andsid Keskkonnainvesteeringute Keskuse viienda sünnipäeva puhul ajakirjanikele pressikonverentsi KIK-i nõukogu esimees, keskkonnaminister Villu Reiljan, KIK-i juhataja Kalev Aun ja programmijuht Heiko Põdersalu

Astronaut Dale Gardner rehearses during EVA practice

Science.gov (United States)

1984-01-01

Astronaut Dale A. Gardner, 51-A mission specialist, rehearses control of manned maneuvering unit (MMU) during a practice for an extravehicular activity (EVA). Gardner is in the Shuttle mockup and integration laboratory at JSC. Gardner handles a stinger device to make initial contact with one of the two satellites they will be working with.

Influence of association of "EVA-NBR" on indirect tensile strength of modified bituminous concrete

Science.gov (United States)

Chinoun, M.; Soudani, K.; Haddadi, S.

2016-04-01

The aim of this work is to contribute to the improvement of the mechanical properties of bituminous concrete by modification of bituminous concrete. In this study, we present the results of the indirect tensile strength "ITS" of modified bituminous concrete by the combination of two modifiers, one is a plastomer EVA (Ethylene Vinyl Acetate) and the other is a industrial waste from the shoe soles grinding NBR (Nitrile Butadiene Rubber) as crumb rubber. To modify the bitumen a wet process was used. The results show that the modification of bitumen by EVA-NBR combination increases their resistance to the indirect traction "ITS" compared to the bituminous concrete control. The mixture of 5% [50% EVA+ 50% NBR] is given the best result among the other associations.

Lightweight concrete blocks with EVA recycled aggregate: a contribution to the thermal efficiency of building external walls

Directory of Open Access Journals (Sweden)

De Melo, A. B.

2013-12-01

Full Text Available The regions with lots of shoe production suffer environmental impacts from waste generation during manufacturing of insoles and outsoles. Research conducted in Brazil has demonstrated the technical feasibility to recycle these wastes, especially Ethylene Vinyl Acetate (EVA, as lightweight aggregate, in the production of non-structural cement blocks. This article presents an evaluation of thermal performance with measurements of temperature variation in mini walls (1 m2 built with different materials, including various kinds of EVA block and ceramic bricks. Tests have shown efficient thermal performance for masonry blocks with EVA. These results and supplementary estimates contribute to add value to the EVA block, considering that there are good expectations that the component, with the new geometry proposed, can contribute to the energy efficiency of buildings, highlighting its suitability to most Brazilian bioclimatic regions.Las regiones con una gran producción de calzado sufren impactos ambientales derivados de la generación de residuos durante la producción de plantillas y suelas. Investigaciones realizadas en Brasil han demostrado la viabilidad técnica para el reciclaje de estos residuos, especialmente el Etileno Vinil Acetato (EVA, como agregado ligero en la fabricación de bloques de hormigón no estructurales. Este trabajo presenta una evaluación del rendimiento térmico, con mediciones de la variación de la temperatura en pequeñas paredes (1 m2 construidas con diversos materiales, incluyendo algunos tipos de bloques EVA y ladrillos de cerámica. Las pruebas demostraron actuaciones térmicas eficientes para las muestras con bloques EVA. Estos resultados y cálculos adicionales contribuyen con un aporte de valor añadido al bloque EVA, considerando que existen buenas expectativas del componente, con una nueva propuesta de geometría, pudiendo contribuir a la eficiencia energética de edificios, especialmente por su adecuación a la

An Integrated Extravehicular Activity Research Plan

Science.gov (United States)

Abercromby, Andrew F. J.; Ross, Amy J.; Cupples, J. Scott

2016-01-01

Multiple organizations within NASA and outside of NASA fund and participate in research related to extravehicular activity (EVA). In October 2015, representatives of the EVA Office, the Crew and Thermal Systems Division (CTSD), and the Human Research Program (HRP) at NASA Johnson Space Center agreed on a formal framework to improve multi-year coordination and collaboration in EVA research. At the core of the framework is an Integrated EVA Research Plan and a process by which it will be annually reviewed and updated. The over-arching objective of the collaborative framework is to conduct multi-disciplinary cost-effective research that will enable humans to perform EVAs safely, effectively, comfortably, and efficiently, as needed to enable and enhance human space exploration missions. Research activities must be defined, prioritized, planned and executed to comprehensively address the right questions, avoid duplication, leverage other complementary activities where possible, and ultimately provide actionable evidence-based results in time to inform subsequent tests, developments and/or research activities. Representation of all appropriate stakeholders in the definition, prioritization, planning and execution of research activities is essential to accomplishing the over-arching objective. A formal review of the Integrated EVA Research Plan will be conducted annually. External peer review of all HRP EVA research activities including compilation and review of published literature in the EVA Evidence Book is already performed annually. Coordination with stakeholders outside of the EVA Office, CTSD, and HRP is already in effect on a study-by-study basis; closer coordination on multi-year planning with other EVA stakeholders including academia is being actively pursued. Details of the current Integrated EVA Research Plan are presented including description of ongoing and planned research activities in the areas of: Benchmarking; Anthropometry and Suit Fit; Sensors; Human-Suit

Reconfigurable EVA Radio with Built-In Navigation Capability, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Intelligent Automation, Inc. and its sub-contractor, Purdue University, propose to develop a power-efficient miniaturized reconfigurable EVA radio system with...

INTEGRATING ABC AND EVA TO EVALUATE INVESTMENT DECISIONS

Directory of Open Access Journals (Sweden)

N. Chiadamrong

2017-12-01

Full Text Available The significance of investment is transparent in the world of competitive business. Traditional costing systems in which their emphasizes are for short term savings rather than long term benefits have shown some lacking in providing accurate and reliable cost data for the investment decisions. Activity-based Costing (ABC, which is developed to satisfy some of the weaknesses of the traditional costing systems, can provide valuable insights into the operating processes and come up with more accurate cost data. In this paper, ABC is used to provide significant information for investment decisions. Although, the ABC method provides accurate operating product costs, it does not identify which products are economic valued added creators and so contribute to companies’ wealth. This drawback can be overcome by applying Economic Value Added (EVA. The adoption of ABC and EVA can represent a considerable change in the managerial thinking and to corporate strategies and business performance.

EVA 1 - ADAM 1

International Nuclear Information System (INIS)

Decken, C.B. von der; Fedders, H.; Hoehlein, B.

1980-01-01

The supplying of industry and households with heat is a central problem in our economy. The crisis background of oil supply renders a long-term secured heat supply with nuclear power plants a discussible alternative. The district heating in the form of hot water, which is heated in power plants and supplied to the consumer via district heating pipeline networks, however, is limited due to the unavoidable heat losses. To bridge long distances between the heat source and consumer and to maintain the heat at a high temperature level, there are distinct advantages in using the EVA-ADAM principle of long-distance energy transport. (orig.) [de

Examination of a Standardized Test for Evaluating the Degree of Cure of EVA Encapsulation (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Miller, D.; Wohlgemuth, J.; Gu, X.; Haldeman, S.; Hidalgo, M.; Malguth, E.; Reid, C.; Shioda, T.; Schulze, S.; Wang, Z.

2013-11-01

The curing of cross-linkable encapsulation is a critical consideration for photovoltaic (PV) modules manufactured using a lamination process. Concerns related to ethylene-co-vinyl acetate (EVA) include the quality (e.g., expiration and uniformity) of the films or completion (duration) of the cross-linking of the EVA within a laminator. Because these issues are important to both EVA and module manufacturers, an international standard has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the degree of cure for EVA encapsulation. The present draft of the standard calls for the use of differential scanning calorimetry (DSC) as the rapid, enabling secondary (test) method. Both the residual enthalpy- and melt/freeze-DSC methods are identified. The DSC methods are calibrated against the gel content test, the primary (reference) method. Aspects of other established methods, including indentation and rotor cure metering, were considered by the group. Key details of the test procedure will be described.

Examination of a Standardized Test for Evaluating the Degree of Cure of EVA Encapsulation: Preprint

Energy Technology Data Exchange (ETDEWEB)

Miller, D. C.; Gu, X.; Haldenman, S.; Hidalgo, M.; Malguth, E.; Reid, C. G.; Shioda, T.; Schulze, S. H.; Wang, Z. Y.; Wohlgemuth, J. H.

2013-11-01

The curing of cross-linkable encapsulation is a critical consideration for photovoltaic (PV) modules manufactured using a lamination process. Concerns related to ethylene-co-vinyl acetate (EVA) include the quality (e.g., expiration and uniformity) of the films or completion (duration) of the cross-linking of the EVA within a laminator. Because these issues are important to both EVA and module manufacturers, an international standard has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the degree of cure for EVA encapsulation. The present draft of the standard calls for the use of differential scanning calorimetry (DSC) as the rapid, enabling secondary (test) method. Both the residual enthalpy- and melt/freeze-DSC methods are identified. The DSC methods are calibrated against the gel content test, the primary (reference) method. Aspects of other established methods, including indentation and rotor cure metering, were considered by the group. Key details of the test procedure will be described.

Soomemeelsed / Eva Klemets ja Juhan Ulfsak ; intervjueerinud Rednar Annus

Index Scriptorium Estoniae

Koldits, Eva, 1977-

2009-01-01

Kristian Smedsi lavastusest "Mental Finland", milles osalevad üheteistkümne rahvuse esindajad, sealhulgas eesti näitlejad Juhan Ulfsak ja Eva Klemets. Koostööst Kristian Smedsi trupiga. Eesti ja soome teatrimaastiku erinevusest ja sarnasusest

FY13 High Performance EVA Glove (HPEG) Collaboration: Glove Injury Data Mining Effort - Training Data Overview

Science.gov (United States)

Reid, Christopher; Benson, Elizabeth; England, Scott; Charvat, Jacqueline; Norcross, Jason; McFarland, Shane; Rajulu, Sudhakar

2014-01-01

From the time hand-intensive tasks were first created for EVAs, discomforts and injuries have been noted.. There have been numerous versions of EVA gloves for US crew over the past 50 years, yet pain and injuries persist. The investigation team was tasked with assisting in a glove injury assessment for the High Performance EVA Glove (HPEG) project.center dot To aid in this assessment, the team was asked to complete the following objectives: - First, to develop the best current understanding of what glove-related injuries have occurred to date, and when possible, identify the specific mechanisms that caused those injuries - Second, to create a standardized method for comparison of glove injury potential from one glove to another. center dot The overall goal of the gloved hand injury assessment is to utilize ergonomics in understanding how these glove injuries are occurring, and to propose mitigations to current designs or design changes in the next generation of EVA gloves.

Irradiation crosslinking and halogen-free flame retardation of EVA using hydrotalcite and red phosphorus

Energy Technology Data Exchange (ETDEWEB)

Jiao Chuanmei [State Key Lab of Fire Science, University of Science and Technology of China, Anhui 230026 (China); Wang Zhengzhou [State Key Lab of Fire Science, University of Science and Technology of China, Anhui 230026 (China)]. E-mail: zwang@ustc.edu.cn; Chen Xilei [State Key Lab of Fire Science, University of Science and Technology of China, Anhui 230026 (China); Yu Benyi [State Key Lab of Fire Science, University of Science and Technology of China, Anhui 230026 (China); Hu Yuan [State Key Lab of Fire Science, University of Science and Technology of China, Anhui 230026 (China)

2006-05-15

Halogen-free flame retarded ethylene vinyl acetate copolymer (EVA) composites using Mg-Al-CO{sub 3} hydrotalcite (MALDH) and microcapsulated red phosphorus (MRP) have been prepared in a melt process. The flame retardation of the composites has been studied by the limited oxygen index (LOI) and UL-94 methods, and the thermal decomposition by the thermogravimetric analysis (TGA). The changes of their properties of the composites before and after the Gamma irradiation are compared. The synergistic effect in the flame retardation between MALDH and MRP in EVA has been found. The EVA/MALDH/MRP composites after the irradiation crosslinking result in a great increase in the Vicat softening point. The LOI value, the mechanical properties and thermal stability are also improved for the composites irradiated by a suitable irradiation dose.

Irradiation crosslinking and halogen-free flame retardation of EVA using hydrotalcite and red phosphorus

International Nuclear Information System (INIS)

Jiao Chuanmei; Wang Zhengzhou; Chen Xilei; Yu Benyi; Hu Yuan

2006-01-01

Halogen-free flame retarded ethylene vinyl acetate copolymer (EVA) composites using Mg-Al-CO 3 hydrotalcite (MALDH) and microcapsulated red phosphorus (MRP) have been prepared in a melt process. The flame retardation of the composites has been studied by the limited oxygen index (LOI) and UL-94 methods, and the thermal decomposition by the thermogravimetric analysis (TGA). The changes of their properties of the composites before and after the Gamma irradiation are compared. The synergistic effect in the flame retardation between MALDH and MRP in EVA has been found. The EVA/MALDH/MRP composites after the irradiation crosslinking result in a great increase in the Vicat softening point. The LOI value, the mechanical properties and thermal stability are also improved for the composites irradiated by a suitable irradiation dose

A comparative study of EVA with and without thermal history for different lamination process parameters

Energy Technology Data Exchange (ETDEWEB)

Drabczyk, Kazimierz, E-mail: kazimierz.drabczyk@wp.pl [Institute of Metallurgy and Materials Science, 25 Reymonta St., 30-059 Krakow (Poland); Panek, Piotr [Institute of Metallurgy and Materials Science, 25 Reymonta St., 30-059 Krakow (Poland)

2012-09-01

In more than 80% of the worldwide photovoltaic (PV) modules, mostly very fragile and 200 {mu}m thick, crystalline silicon solar cells are encapsulated into ethylene-vinyl acetate (EVA) foils, which bond the module components together, provide physical protection, electrical insulation and a barrier for moisture ingress. The understanding of what can happen with EVA during its transport, storage and lamination process is necessary to optimize the quality of the PV module for its long exposure to outdoor weather conditions. Achieving a proper cross-link density of over 70%, it is essential to overcome the cold flow of EVA and to make the module durable. In this work, the feasibility of the use of differential scanning calorimetry (DSC) compared with the solvent extraction (SE) method by toluene were evaluated in order to provide structural information on the EVA curing kinetics and the cross-link density. DSC tests were performed on a DTA DuPont1600 tester. The temperature range for the test was from -50 Degree-Sign C to 200 Degree-Sign C, with the heating rate of 10 Degree-Sign C/min, and the endothermic and exothermic peaks were evaluated. Toluene solvent extractions were performed on the same set of samples that were analyzed by DSC. The measured cross-link density shows a direct dependence on the pre-lamination conditions of EVA, which is in good agreement with the data obtained with the DSC method.

A comparative study of EVA with and without thermal history for different lamination process parameters

International Nuclear Information System (INIS)

Drabczyk, Kazimierz; Panek, Piotr

2012-01-01

In more than 80% of the worldwide photovoltaic (PV) modules, mostly very fragile and 200 μm thick, crystalline silicon solar cells are encapsulated into ethylene-vinyl acetate (EVA) foils, which bond the module components together, provide physical protection, electrical insulation and a barrier for moisture ingress. The understanding of what can happen with EVA during its transport, storage and lamination process is necessary to optimize the quality of the PV module for its long exposure to outdoor weather conditions. Achieving a proper cross-link density of over 70%, it is essential to overcome the cold flow of EVA and to make the module durable. In this work, the feasibility of the use of differential scanning calorimetry (DSC) compared with the solvent extraction (SE) method by toluene were evaluated in order to provide structural information on the EVA curing kinetics and the cross-link density. DSC tests were performed on a DTA DuPont1600 tester. The temperature range for the test was from −50 °C to 200 °C, with the heating rate of 10 °C/min, and the endothermic and exothermic peaks were evaluated. Toluene solvent extractions were performed on the same set of samples that were analyzed by DSC. The measured cross-link density shows a direct dependence on the pre-lamination conditions of EVA, which is in good agreement with the data obtained with the DSC method.

ETV tähistab tantsupäeva kolme filmiga

Index Scriptorium Estoniae

2006-01-01

Rahvusvahelise tantsupäeva puhul 29. apr. on Eesti Televisiooni kavas kolm tantsuprogrammi - Uwe Scholzi tantsulavastus "Suur Missa", tantsufilm "Teine" (filmi režissöör René Vilbre) ja kolmas film on Inglismaal valminud Lloyd Newsoni "Elu hind"

Validation suite for MCNP

International Nuclear Information System (INIS)

Mosteller, Russell D.

2002-01-01

Two validation suites, one for criticality and another for radiation shielding, have been defined and tested for the MCNP Monte Carlo code. All of the cases in the validation suites are based on experiments so that calculated and measured results can be compared in a meaningful way. The cases in the validation suites are described, and results from those cases are discussed. For several years, the distribution package for the MCNP Monte Carlo code1 has included an installation test suite to verify that MCNP has been installed correctly. However, the cases in that suite have been constructed primarily to test options within the code and to execute quickly. Consequently, they do not produce well-converged answers, and many of them are physically unrealistic. To remedy these deficiencies, sets of validation suites are being defined and tested for specific types of applications. All of the cases in the validation suites are based on benchmark experiments. Consequently, the results from the measurements are reliable and quantifiable, and calculated results can be compared with them in a meaningful way. Currently, validation suites exist for criticality and radiation-shielding applications.

Results and Lessons Learned from Performance Testing of Humans in Spacesuits in Simulated Reduced Gravity

Science.gov (United States)

Chappell, Steven P.; Norcross, Jason R.; Gernhardt, Michael L.

2009-01-01

NASA's Constellation Program has plans to return to the Moon within the next 10 years. Although reaching the Moon during the Apollo Program was a remarkable human engineering achievement, fewer than 20 extravehicular activities (EVAs) were performed. Current projections indicate that the next lunar exploration program will require thousands of EVAs, which will require spacesuits that are better optimized for human performance. Limited mobility and dexterity, and the position of the center of gravity (CG) are a few of many features of the Apollo suit that required significant crew compensation to accomplish the objectives. Development of a new EVA suit system will ideally result in performance close to or better than that in shirtsleeves at 1 G, i.e., in "a suit that is a pleasure to work in, one that you would want to go out and explore in on your day off." Unlike the Shuttle program, in which only a fraction of the crew perform EVA, the Constellation program will require that all crewmembers be able to perform EVA. As a result, suits must be built to accommodate and optimize performance for a larger range of crew anthropometry, strength, and endurance. To address these concerns, NASA has begun a series of tests to better understand the factors affecting human performance and how to utilize various lunar gravity simulation environments available for testing.

Development of lightweight concrete subfloor with ethylene vinyl acetate (EVA) aggregates waste to reduce impact sound in flooring system

OpenAIRE

Pacheco, Fernanda; Krumenauer, Marcelo; Reis de Medeiros, Daniel; Oliveira, Maria Fernanda; Fonseca Tutikian, Bernardo

2017-01-01

Abstract Comfort and habitability are requirements for housing quality, affected by underfloor system. Thus, this study aims to design lightweight concrete slabs underfloor with the use of ethylene vinyl acetate (EVA) aggregates, with two grain sizes of conventional aggregates replaced with EVA. The experimental counted on four unit mixes, varying the ratio between EVA coarse and fine aggregates and natural aggregates. The underfloor plates were molded with thickness of 3, 5 and 7 centimeters...

Maturing Pump Technology for EVA Applications in a Collaborative Environment

Science.gov (United States)

Hodgson, Edward; Dionne, Steven; Gervais, Edward; Anchondo, Ian

2012-01-01

The transition from low earth orbit Extravehicular Activity (EVA) for construction and maintenance activities to planetary surface EVA on asteroids, moons, and, ultimately, Mars demands a new spacesuit system. NASA's development of that system has resulted in dramatically different pumping requirements from those in the current spacesuit system. Hamilton Sundstrand, Cascon, and NASA are collaborating to develop and mature a pump that will reliably meet those new requirements in space environments and within the design constraints imposed by spacesuit system integration. That collaboration, which began in the NASA purchase of a pump prototype for test evaluation, is now entering a new phase of development. A second generation pump reflecting the lessons learned in NASA's testing of the original prototype will be developed under Hamilton Sundstrand internal research funding and ultimately tested in an integrated Advanced Portable Life Support System (APLSS) in NASA laboratories at the Johnson Space Center. This partnership is providing benefit to both industry and NASA by supplying a custom component for EVA integrated testing at no cost to the government while providing test data for industry that would otherwise be difficult or impossible to duplicate in industry laboratories. This paper discusses the evolving collaborative process, component requirements and design development based on early NASA test experience, component stand alone test results, and near term plans for integrated testing at JSCs.

Eesti vanim raamatukogu tähistab 450. aastapäeva

Index Scriptorium Estoniae

2002-01-01

Oleviste raamatukogu, mille varad on EAR baltikaosakonnas. Aastapäeva puhul avati näitus "Tallinna Oleviste raamatukogu 450" 3. aprillil 2002 Tallinna Raekoja keldrisaalis, samuti esitletakse kogumikku "Bibliotheca Revaliensis ad. D. Olai"

Kõne EV aastapäeva aktusel / Karl Altau

Index Scriptorium Estoniae

Altau, Karl Stephen, 1959-

2006-01-01

Läti kirikus peetud Eesti Vabariigi aastapäeva aktusel rääkis Karl Altau Ühendatud Balti Ameerika Komitee nimel kommunismi ohvrite mälestussamba ehitamise alustamisest Washingtoni kesklinna 2006. aastal, koostööst kõigi baltlaste vahel ja võimalusest annetada, üleskutsest toetada Valgevene rahvast teel demokraatiale

Meremaa võluriga päeva kallastele / Helle Leppik

Index Scriptorium Estoniae

Leppik, Helle

1999-01-01

29. apr. esietendub Ugalas "Meremaa võlur. Päeva kaldad", lavalugu Ursula K. Le Guini Meremaa-lugude alusel, lavastaja Andres Noormets, kunstnikud Silver Vahtre ja Airi Eras, peaosades Margus Vaher, Martin Algus, Aarne Soro, Leila Säälik, Gert Raudsepp, Silvia Sarrap

EVA measure and ability of the firm to create shareholder wealth

Directory of Open Access Journals (Sweden)

Gabriela Chmelíková

2007-01-01

Full Text Available This paper is devoted to the possibilities of Economic Value Added index usage in the conditions of Czech food-processing industry and is trying to provide independent empirical evidence on the indicator’s qualities. The EVA proponents attach to it a superiority compared to other common performance measures. The aim of this article is to investigate the relationship between Economic Value Added, traditional performance measures (ROA and ROE and ability of creation of shareholder wealth for food-processing firms in the Czech Republic. The way of intended comparison is not dissimilar to the main world studies, which are quoted in this paper. A critical point of the EVA’s application in the conditions of Czech economy is a lack of good quality information from capital market, which at the same time, serve as an exogenous criterion for assessing the quality of the examined measures in the mentioned studies. In the absence of quality capital market information, a criterion for assessing the information content of performance measures suitable for conditions of Czech economy is developed in this paper. This also shows how to circumvent the handicap of the available data.The intent of this article is fulfilled by providing a simple regression test of the hypothesis, that the EVA measure is more associated with improved shareholder wealth than traditional performance measures ROA and ROE. The results of regression analysis show higher quality information content of EVA indicator in the relationship to the ability of shareholder wealth creation than traditional performance measures. This fact supports the tested hypothesis as well as the conclusions of corporate finance theory, that from the theoretical point of view EVA is seen as a superior performance metric.

Astronaut Dale Gardner rehearses control of MMU during EVA practice

Science.gov (United States)

1984-01-01

Astronaut Dale A. Gardner, 51-A mission specialist, rehearses control of manned maneuvering unit (MMU) during a practice for an extravehicular activity (EVA). Gardner is in the Shuttle mockup and integration laboratory at JSC.

THE ECONOMIC VALUE ADDED (EVA - A MEASUREMENT INDICATOR OF THE VALUE CREATION WITHIN A COMPANY FROM THE ROMANIAN SEASIDE HOTEL INDUSTRY

Directory of Open Access Journals (Sweden)

RALUCA-ANDREEA TRANDAFIR

2015-03-01

Full Text Available The purpose of this research is to highlight the role of EVA – an indicator measuring the financial performance of a hotel company from the Romanian seaside. EVA is one of the most appreciated indicators in terms of achieving performance that involve all used resources; this indicator can be adopted for the decentralization of management decisions. In order to highlight the importance of the EVA assessment method, we performed a case study on a representative hotel company that gets positive financial results pursuant to conventional methods, aiming to outline the correlation between EVA and the traditional methods for performance assessment

Human Research Program Human Health Countermeasures Element Extravehicular Activity (EVA) Risk Standing Review Panel (SRP)

Science.gov (United States)

Norfleet, William; Harris, Bernard

2009-01-01

The Extravehicular Activity (EVA) Risk Standing Review Panel (SRP) was favorably impressed by the operational risk management approach taken by the Human Research Program (HRP) Integrated Research Plan (IRP) to address the stated life sciences issues. The life sciences community at the Johnson Space Center (JSC) seems to be focused on operational risk management. This approach is more likely to provide risk managers with the information they need at the time they need it. Concerning the information provided to the SRP by the EVA Physiology, Systems, and Performance Project (EPSP), it is obvious that a great deal of productive activity is under way. Evaluation of this information was hampered by the fact that it often was not organized in a fashion that reflects the "Gaps and Tasks" approach of the overall Human Health Countermeasures (HHC) effort, and that a substantial proportion of the briefing concerned subjects that, while interesting, are not part of the HHC Element (e.g., the pressurized rover presentation). Additionally, no information was provided on several of the tasks or how they related to work underway or already accomplished. This situation left the SRP having to guess at the efforts and relationship to other elements, and made it hard to easily map the EVA Project efforts currently underway, and the data collected thus far, to the gaps and tasks in the IRP. It seems that integration of the EPSP project into the HHC Element could be improved. Along these lines, we were concerned that our SRP was split off from the other participating SRPs at an early stage in the overall agenda for the meeting. In reality, the concerns of EPSP and other projects share much common ground. For example, the commonality of the concerns of the EVA and exercise physiology groups is obvious, both in terms of what reduced exercise capacity can do to EVA capability, and how the exercise performed during an EVA could contribute to an overall exercise countermeasure prescription.

Hubble Space Telescope EVA Power Ratchet Tool redesign

Science.gov (United States)

Richards, Paul W.; Park, Chan; Brown, Lee

The Power Ratchet Tool (PRT) is a self contained, power-driven, 3/8 inch drive ratchet wrench which will be used by astronauts during Extravehicular Activities (EVA). This battery-powered tool is controlled by a dedicated electonic controller. The PRT was flown during the Hubble Space Telescope (HST) Deployment Mission STS-31 to deploy the solar arrays if the automatic mechanisms failed. The PRT is currently intended for use during the first HST Servicing Mission STS-61 as a general purpose power tool. The PRT consists of three major components; the wrench, the controller, and the battery module. Fourteen discrete combinations of torque, turns, and speed may be programmed into the controller before the EVA. The crewmember selects the desired parameter profile by a switch mounted on the controller. The tool may also be used in the manual mode as a non-powered ratchet wrench. The power is provided by a silver-zinc battery module, which fits into the controller and is replaceable during an EVA. The original PRT did not meet the design specification of torque output and hours of operation. To increase efficiency and reliability the PRT underwent a redesign effort. The majority of this effort focused on the wrench. The original PRT drive train consisted of a low torque, high speed brushless DC motor, a face gear set, and a planocentric gear assembly. The total gear reduction was 300:1. The new PRT wrench consists of a low speed, high torque brushless DC motor, two planetary gear sets and a bevel gear set. The total gear reduction is now 75:1. A spline clutch has also been added to disengage the drive train in the manual mode. The design changes to the controller will consist of only those modifications necessary to accomodate the redesigned wrench.

Eesti piirivalve tähistas 85. aastapäeva

Index Scriptorium Estoniae

2007-01-01

President Toomas Hendrik Ilvese sõnavõtust Eesti kutselise piirivalve 85. aastapäeva tähistamise pidulikul kontsertaktusel 1. novembril 2007 Estonia kontserdisaalis. Ingl. k. ilmunud ka: Vaba Eesti Sõna 8. nov. 2007, lk. 12, pealk.: President Ilves thanked the Estonian border guards

PROPRIEDADES DE ARGAMASSAS COM EVA (ETHYLENE VINYL ACETATE EM SUBSTITUIÇÃO PARCIAL AO AGREGADO

Directory of Open Access Journals (Sweden)

Cleidson Carneiro Guimarães

2017-03-01

Full Text Available RESUMO: O setor da construção civil apresenta grande potencial para aproveitamento de vários tipos de resíduos industriais. A incorporação dos resíduos, principalmente nas argamassas e concretos, produtos com vasta aplicabilidade no setor, tem se mostrado como uma ótima alternativa na diversificação das matérias-primas e para a economia de recursos naturais. Esse trabalho avaliou as propriedades das argamassas, no estado fresco e endurecido, produzidas com substituição parcial da areia por resíduo de EVA (Ethylene Vinyl Acetate. Para isso, foram preparadas argamassas com teores de substituição do agregado 0% (referência, 5%, 10% e 15%, em massa. A relação água/cimento, para cada traço, foi determinada empiricamente e mantida constante para as argamassas com substituição. Os resultados apontam que as argamassas produzidas com agregado de EVA apresentam menor absorção de água e também um decréscimo da resistência mecânica. Desta forma, a produção de argamassas utilizando EVA em substituição ao agregado natural é viável, todavia é necessário avaliar os parâmetros mínimos de aplicação para cada finalidade. Dessa forma, o trabalho apresenta contribuição ao servir de suporte a gestores de empresas de argamassas ou gestores de obra a tomarem decisões acerca da inserção do resíduo de EVA na produção de argamassa. ABSTRACT: The construction sector has great potential for use of various types of industrial waste. The incorporation of waste, especially in mortar and concrete products with wide applicability in the industry, has proven to be a great alternative for diversification of raw materials and the economy of natural resources. This study evaluated the properties of mortars in fresh and hardened state, made with partial replacement of sand by waste EVA (Ethylene Vinyl Acetate. For this, mortars were prepared with substitution aggregate content 0%(reference, 5%, 10% and 15% by weight. The water

Main propulsion system design recommendations for an advanced Orbit Transfer Vehicle

Science.gov (United States)

Redd, L.

1985-01-01

Various main propulsion system configurations of an advanced OTV are evaluated with respect to the probability of nonindependent failures, i.e., engine failures that disable the entire main propulsion system. Analysis of the life-cycle cost (LCC) indicates that LCC is sensitive to the main propulsion system reliability, vehicle dry weight, and propellant cost; it is relatively insensitive to the number of missions/overhaul, failures per mission, and EVA and IVA cost. In conclusion, two or three engines are recommended in view of their highest reliability, minimum life-cycle cost, and fail operational/fail safe capability.

Consuming the daily recommended amounts of dairy products ...

African Journals Online (AJOL)

1 Dairy Management Inc., 10255 West Higgins Road, Suite 900, Rosemont, 60018, IL, USA. 2 Nutrition ... as consuming the recommended servings from each food group ...... database analyses for various food and beverage companies and.

TÜ tähistab rahvusülikooli aastapäeva

Index Scriptorium Estoniae

2010-01-01

Emakeelse ülikooli 91. aastapäeva tähistamisest. Aktusel promoveeriti 103 doktorit ja 5 audoktorit. Audoktoriks said: Jaan Einasto (Eesti), Vilmos Voigt (Ungari), Pekka Topias Männistö (Soome), William J. Mitsch (USA), Lars Oreland (Rootsi)

Instant Spring Tool Suite

CERN Document Server

Chiang, Geoff

2013-01-01

Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. A tutorial guide that walks you through how to use the features of Spring Tool Suite using well defined sections for the different parts of Spring.Instant Spring Tool Suite is for novice to intermediate Java developers looking to get a head-start in enterprise application development using Spring Tool Suite and the Spring framework. If you are looking for a guide for effective application development using Spring Tool Suite, then this book is for you.

29. V peeti Narva kunstigaleriis traditsioonilist kunstnikupäeva

Index Scriptorium Estoniae

2004-01-01

Salvador Dali 100. sünniaastapäevale pühendatud kunstnikupäeval eksponeerisid 53 Narva, Ivangorodi, Kohtla-Järve, Jõhvi ja Tallinna kunstnikku Dali loomingust inspireeritud töid. Päeva külaline: Tallinna Katariina gild eesotsas Kaire Taliga. Toimus teatri VB performance "Aastaajad. Mitgard"

The properties of neutron shielding and flame retardant of EVA polymer after modified by EB accelerator

Science.gov (United States)

Wang, Guo-hui; He, Man-li; Jiang, Dan-feng; He, Fan; Chang, Shu-quan; Dai, Yao-dong

2017-11-01

According to the requirements for neutron shielding and flame retardant properties of some nuclear devices, a new kind of polymer composite materials based on ethylene and vinyl acetate (EVA) polymer have been studied. EVA is the copolymer of ethylene and vinyl acetate, It can be used as materials for applications due to its flexibility, good processability, and low cost. Insulating EVA can be used for cable sheath, automotive sound damping and many other appication. Boron nitride (BN), zinc borate (ZB), magnesium hydroxide (MH) and EVA consisted the compounds with the properties of neutron shielding and flame retardant. With increasing of the contents of BN and ZB, the neutron shielding performance of materials increased up to 33.08%. With the increasing contents of MH and ZB as flame retardant, oxygen index of material have been improved. The elongation at break and tensile strength of material decreased with the increasing of filler powders. Sheet E was chosen and modified by electron beam accelerator in different doses. After modification by electron beam irradiation the sheets showed varying degrees of transformation in the OI, neutron shielding rate and mechanical properties.

High-resolution modelling of health impacts from air pollution using the integrated model system EVA

Science.gov (United States)

Brandt, Jørgen; Andersen, Mikael S.; Bønløkke, Jakob; Christensen, Jesper H.; Geels, Camilla; Hansen, Kaj M.; Jensen, Steen S.; Ketzel, Matthias; Plejdrup, Marlene S.; Sigsgaard, Torben; Silver, Jeremy D.

2014-05-01

A high-resolution assessment of health impacts from air pollution and related external cost has been conducted for Denmark using the integrated EVA model system. The EVA system has been further developed by implementing an air quality model with a 1 km x 1 km resolution covering the whole of Denmark. New developments of the integrated model system will be presented as well as results for health impacts and related external costs over several decades. Furthermore, the sensitivity of health impacts to model resolution will be studied. We have developed an integrated model system EVA (Economic Valuation of Air pollution), based on the impact-pathway chain, to assess the health impacts and health-related economic externalities of air pollution resulting from specific emission sources or sectors. The system is used to support policymaking with respect to emission control. In Brandt et al. (2013a; 2013b), the EVA system was used to assess the impacts in Europe and Denmark from the past, present and future total air pollution levels as well as the contribution from the major anthropogenic emission sectors. The EVA system was applied using the hemispheric chemistry-transport model, the Danish Eulerian Hemispheric Model (DEHM), with nesting capability for higher resolution over Europe (50 km x 50 km) and Northern Europe (16.7 km x 16.7 km). In this study an Urban Background Model (UBM) has been further developed to cover the whole of Denmark with a 1 km x 1 km resolution and the model has been implemented as a part of the integrated model system, EVA. The EVA system is based on the impact-pathway methodology. The site-specific emissions will result (via atmospheric transport and chemistry) in a concentration distribution, which together with detailed population data, are used to estimate the population-level exposure. Using exposure-response functions and economic valuations, the exposure is transformed into impacts on human health and related external costs. In this study

Simunas pühitseti uus vitraažaken / Eva Klaas

Index Scriptorium Estoniae

Klaas, Eva, 1977-

2009-01-01

Simunas tähistati 31. oktoobril Simuna kiriku ja kogu kihelkonna nimepäeva, pühitseti ka äsjavalminud vitraažaken, mille autor on Dolores Hoffmann, kelle kujundatud on ka sarja "Maailma loomine" kuuluvad teised vitraažid

Chemical and Biological Substances Decontamination Study for Mars Missions and Terrestrial Applications

Science.gov (United States)

Pottage, Thomas; Walker, James; Bennett, Allan; Vrublevskis, John; Hovland, Scott

could be employed singularly and in combination to decontaminate the habitat. From this review a trade off matrix was compiled scoring each technology on a determined set of parameters. The highest score indicated the most suitable technology. For missions up to 6 months surface cleaning using disinfectant wipes were recommended in combination with an air disinfection/filtration system. For missions greater than 6 months these techniques would be complemented by the addition of a gaseous decontamination system, which could be periodically used to reduce microbial load from inaccessible surfaces. WP3 reviewed the current technologies that could be used for the decontamination of the EVA suit, both external surfaces (after use on the Lunar and Martian surfaces) and internal surfaces. Trade off matrices were constructed to reflect the new parameters for these uses. Only physical decontamination of the exterior surface of the EVA suit is needed for Lunar mission, but for Martian missions this must be enhanced with a gaseous disinfection technology. The interior of the suit can be decontaminated using passive antimicrobial fabrics and active cleaning using disinfectant wipes. WP4 summarised the previous TNs, and included estimates of costs and timelines for the development, based on technology readiness levels, of technologies that need to be flight proven before use on a mission.

Executive compensation and the EVA and MVA performance of ...

African Journals Online (AJOL)

The media regularly report a growing incidence of non-alignment of executive pay and performance, and in some cases, no link between the two whatsoever. The advent of new measures of shareholder wealth such as economic value added (EVA) and market value added (MVA) have allowed some companies to link ...

Preparation, Characterization and Thermo-Chromic Properties of EVA/VO2 Laminate Films for Smart Window Applications and Energy Efficiency in Building

Directory of Open Access Journals (Sweden)

Onruthai Srirodpai

2017-01-01

Full Text Available Thermochromic films based on vanadium dioxide (VO2/ethylene vinyl acetate copolymer (EVA composite were developed. The monoclinic VO2 particles was firstly prepared via hydrothermal and calcination processes. The effects of hydrothermal time and tungsten doping agent on crystal structure and morphology of the calcined metal oxides were reported. After that, 1 wt % of the prepared VO2 powder was mixed with EVA compound, using two different mixing processes. It was found that mechanical properties of the EVA/VO2 films prepared by the melt process were superior to those of which prepared by the solution process. On the other hand, percentage visible light transmittance of the solution casted EVA/VO2 film was greater than that of the melt processed composite film. This was related to the different gel content of EVA rubber and state of dispersion and distribution of VO2 within the polymer matrix phase. Thermochromic behaviors and heat reflectance of the EVA/VO2 film were also verified. In overall, this study demonstrated that it was possible to develop a thermochromic film using the polymer composite approach. In this regard, the mixing condition was found to be one of the most important factors affecting morphology and thermo-mechanical properties of the films.

Head animapäeva soovivad Petja ja hunt / Tiit Tuumalu

Index Scriptorium Estoniae

Tuumalu, Tiit, 1971-

2008-01-01

Animaürituste sari "Animateek" tähistab täna rahvusvahelist animapäeva, näidates Suzie Templetoni animafilmi (32 min) Sergei Prokofjevi muusikateose alusel "Petja ja hunt" : Suurbritannia - Norra - Poola 2006. Filmi tutvustab üks selle juhtanimaatoreid Krzysztof Brzozowski

RAJA Performance Suite

Energy Technology Data Exchange (ETDEWEB)

2017-09-01

The RAJA Performance Suite is designed to evaluate performance of the RAJA performance portability library on a wide variety of important high performance computing (HPC) algorithmic lulmels. These kernels assess compiler optimizations and various parallel programming model backends accessible through RAJA, such as OpenMP, CUDA, etc. The Initial version of the suite contains 25 computational kernels, each of which appears in 6 variants: Baseline SequcntiaJ, RAJA SequentiaJ, Baseline OpenMP, RAJA OpenMP, Baseline CUDA, RAJA CUDA. All variants of each kernel perform essentially the same mathematical operations and the loop body code for each kernel is identical across all variants. There are a few kernels, such as those that contain reduction operations, that require CUDA-specific coding for their CUDA variants. ActuaJ computer instructions executed and how they run in parallel differs depending on the parallel programming model backend used and which optimizations are perfonned by the compiler used to build the Perfonnance Suite executable. The Suite will be used primarily by RAJA developers to perform regular assessments of RAJA performance across a range of hardware platforms and compilers as RAJA features are being developed. It will also be used by LLNL hardware and software vendor panners for new defining requirements for future computing platform procurements and acceptance testing. In particular, the RAJA Performance Suite will be used for compiler acceptance testing of the upcoming CORAUSierra machine {initial LLNL delivery expected in late-2017/early 2018) and the CORAL-2 procurement. The Suite will aJso be used to generate concise source code reproducers of compiler and runtime issues we uncover so that we may provide them to relevant vendors to be fixed.

Fatores anteriores ao ingresso como preditivos de evasão nos anos iniciais dos cursos superiores de tecnologia

OpenAIRE

Rafaela de Menezes Souza Brissac

2009-01-01

Resumo: A evasão de estudantes do ensino superior evidencia-se como fenômeno complexo, com conseqüências de ordem pessoal, institucional e social. Entre os estudos que buscam aprofundar o conhecimento sobre este fenômeno encontram-se os que se detém a pesquisar as causas e fatores associados à evasão de alunos neste nível de ensino. No que se refere às variáveis associadas à ocorrência da evasão, os estudos têm mostrado que é possível localizar fatores que são anteriores ao ingresso do estuda...

An innovative exercise method to simulate orbital EVA work - Applications to PLSS automatic controls

Science.gov (United States)

Lantz, Renee; Vykukal, H.; Webbon, Bruce

1987-01-01

An exercise method has been proposed which may satisfy the current need for a laboratory simulation representative of muscular, cardiovascular, respiratory, and thermoregulatory responses to work during orbital extravehicular activity (EVA). The simulation incorporates arm crank ergometry with a unique body support mechanism that allows all body position stabilization forces to be reacted at the feet. By instituting this exercise method in laboratory experimentation, an advanced portable life support system (PLSS) thermoregulatory control system can be designed to more accurately reflect the specific work requirements of orbital EVA.

Taju vormiv arhitektuur / Eva Castro, Holger Kehne ; interv. Inga Raukas

Index Scriptorium Estoniae

Castro, Eva

2002-01-01

Londoni arhitektuuribüroo Plasma Studio arhitektid Eva Castro (s. 1969 Argentiinas) ja Holger Kehne (s. 1970 Saksamaal) räägivad oma tööst ja arhitektuurist. Loetletud büroo tähtsamad arhitektuuriauhinnad ja projektid. Osalesid 5. Põhja- ja Baltimaade arhitektuuritriennaalil

Apparatus for storing protective suits

International Nuclear Information System (INIS)

Englemann, H.J.; Koller, J.; Schrader, H.R.; Schade, G.; Pedrerol, J.

1975-01-01

Arrangements are described for storing one or more protective suits when contaminated on the outside. In order to permit a person wearing a contaminated suit to leave a contaminated area safely, and without contaminating the environment, it has hitherto been the practice for the suit to be passed through a 'lock' and cleansed under decontaminating showers whilst still being worn. This procedure is time wasting and not always completely effective, and it may be necessary to provide a second suit for use whilst the first suit is being decontaminated. Repeated decontamination may also result in undue wear and tear. The arrangements described provide a 'lock' chamber in which a contaminated suit may be stowed away without its interior becoming contaminated, thus allowing repeated use by persons donning and shedding it. (U.K.)

Pharmacy settles suit.

Science.gov (United States)

1998-10-02

A suit was filed by an HIV-positive man against a pharmacy that inadvertently disclosed his HIV status to his ex-wife and children. His ex-wife tried to use the information in a custody battle for their two children. The suit against the pharmacy was settled, but the terms of the settlement remain confidential.

Estudo de misturas asfálticas com ligante modificado pelo polímero EVA para pavimentos urbanos de Manaus - AM Study of asphalt mixtures containing a binder modified with EVA polymer for use in urban pavements in Manaus

Directory of Open Access Journals (Sweden)

Daniela M. G. D'Antona

2011-01-01

Full Text Available A presente pesquisa buscou soluções com materiais alternativos visando à construção de pavimentos urbanos para Manaus (AM com maior vida útil e condizente com as suas condições de serviço, em particular, o seu desempenho mecânico frente às temperaturas regionais. Estudou-se o ligante regional, CAP 50/70, misturado com 4% do polímero EVA, e como partícipe em compósitos asfálticos. A incorporação do mencionado polímero teve como objetivo melhorar suas propriedades reológicas e, por conseguinte, o comportamento mecânico desse compósito - concreto asfáltico, empregado como revestimento nas vias urbanas da Capital do Estado do Amazonas. Os ligantes (virgem e modificado foram caracterizados conforme a especificação da ANP e a metodologia Superpave. As misturas asfálticas foram avaliadas pelo ensaio de fluência por compressão axial, com carregamento dinâmico à temperatura de 40 ºC. O material asfáltico modificado com EVA (AMP EVA demonstrou melhores propriedades reológicas ou equivalentes ao asfalto convencional (REMAN, ao longo de todos os ensaios de caracterização. As misturas alternativas compostas com o CAP modificado (SEVA obtiveram desempenho mecânico superior ao de misturas com cimento asfáltico habitualmente comercializado na região (SMAN.In this research we investigated alternative materials to build urban pavements in Manaus, seeking for pavements with longer lifetime for usage and suitable mechanical properties to withstand the local temperatures. The asphaltic mixtures contained a regional binder, namely CAP 50/70, mixed with 4% of EVA polymer. The incorporation of the latter polymer was aimed at improving the rheological properties of asphaltic concrete used in roads in the Amazonas' capital. The asphalt binders (original and modified were characterized in accordance with the ANP (National Petroleum Agency specification and the Superpave methodology. The asphalt mixtures had their mechanical properties

Heat shrinkage of electron beam modified EVA

International Nuclear Information System (INIS)

Datta, S.K.; Chaki, T.K.; Bhowmick, A.K.

1997-01-01

Heat shrinkage of electron beam modified ethylene vinyl acetate copolymer (EVA) has been investigated over a range of times, temperatures, stretching, irradiation doses and trimethylolpropane trimethacrylate (TMPTMA) levels. The irradiated (radiation dose 50 kGy and TMPTMA level 1%) and stretched (100% elongation) sample shrinks to a maximum level when kept at 453K temperature for 60 s. The heat shrinkage of samples irradiated with radiation doses of 20, 50, 100 and 150 kGy increases sharply with increasing stretching in the initial stage. Amnesia rating decreases with increasing radiation dose and TMPTMA level as well as gel content. The high radiation dose and TMPTMA level lower the heat shrinkage due to the chain scission. The effect of temperature at which extension is carried out on heat shrinkage is marginal. The irradiated (radiation dose 50 kGy and TMPTMA level 1%) EVA tubes of different dimensions expanded in a laboratory grade tube expander show similar behaviour at 453K and 60 s. The X-ray and DSC studies reveal that the crystallinity increases on stretching due to orientation of chains and it decreases to a considerable extent on heat shrinking. The theoretical and experimental values of heat shrinkage for tubes and rectangular strips are in good accord, when the radiation dose is 50 kGy and TMPTMA level 1%. (author)

Heat shrinkage of electron beam modified EVA

Energy Technology Data Exchange (ETDEWEB)

Datta, S.K.; Chaki, T.K.; Bhowmick, A.K. [Indian Institute of Technology, Kharagpur (India). Rubber Technology Center; Tikku, V.K.; Pradhan, N.K. [NICCO Corporation Ltd., (Cable Div.), Calcutta (India)

1997-10-01

Heat shrinkage of electron beam modified ethylene vinyl acetate copolymer (EVA) has been investigated over a range of times, temperatures, stretching, irradiation doses and trimethylolpropane trimethacrylate (TMPTMA) levels. The irradiated (radiation dose 50 kGy and TMPTMA level 1%) and stretched (100% elongation) sample shrinks to a maximum level when kept at 453K temperature for 60 s. The heat shrinkage of samples irradiated with radiation doses of 20, 50, 100 and 150 kGy increases sharply with increasing stretching in the initial stage. Amnesia rating decreases with increasing radiation dose and TMPTMA level as well as gel content. The high radiation dose and TMPTMA level lower the heat shrinkage due to the chain scission. The effect of temperature at which extension is carried out on heat shrinkage is marginal. The irradiated (radiation dose 50 kGy and TMPTMA level 1%) EVA tubes of different dimensions expanded in a laboratory grade tube expander show similar behaviour at 453K and 60 s. The X-ray and DSC studies reveal that the crystallinity increases on stretching due to orientation of chains and it decreases to a considerable extent on heat shrinking. The theoretical and experimental values of heat shrinkage for tubes and rectangular strips are in good accord, when the radiation dose is 50 kGy and TMPTMA level 1%. (author).

Astronauts Allen and Gemar during extravehicular activity (EVA) training in CCT

Science.gov (United States)

1994-01-01

Astronauts Charles D. (Sam) Gemar, and Andrew M. Allen participate in a training exercise at JSC's Crew Compartment Trainer (CCT), located in the Space Vehicle Mockup Facility. Gemar sits inside the airlock as Allen reviews procedures for EVA.

Minimizing liability risks under the ACMG recommendations for reporting incidental findings in clinical exome and genome sequencing

Science.gov (United States)

Evans, Barbara J.

2014-01-01

Recent recommendations by the American College of Medical Genetics and Genomics (ACMG) for reporting incidental findings present novel ethical and legal issues. This article expresses no views on the ethical aspects of these recommendations and focuses strictly on liability risks and how to minimize them. The recommendations place labs and clinicians in a new liability environment that exposes them to intentional tort lawsuits as well to traditional suits for negligence. Intentional tort suits are especially troubling because of their potential to inflict ruinous personal financial losses on individual clinicians and laboratory personnel. This article surveys this new liability landscape and describes analytical approaches for minimizing tort liabilities. To a considerable degree, liability risks can be controlled by structuring activities in ways that make future lawsuits nonviable before the suits ever arise. Proactive liability analysis is an effective tool for minimizing tort liabilities in connection with the testing and reporting activities that the ACMG recommends. PMID:24030435

Minimizing liability risks under the ACMG recommendations for reporting incidental findings in clinical exome and genome sequencing.

Science.gov (United States)

Evans, Barbara J

2013-12-01

Recent recommendations by the American College of Medical Genetics and Genomics (ACMG) for reporting incidental findings present novel ethical and legal issues. This article expresses no views on the ethical aspects of these recommendations and focuses strictly on liability risks and how to minimize them. The recommendations place labs and clinicians in a new liability environment that exposes them to intentional tort lawsuits as well to traditional suits for negligence. Intentional tort suits are especially troubling because of their potential to inflict ruinous personal financial losses on individual clinicians and laboratory personnel. This article surveys this new liability landscape and describes analytical approaches for minimizing tort liabilities. To a considerable degree, liability risks can be controlled by structuring activities in ways that make future lawsuits nonviable before the suits ever arise. Proactive liability analysis is an effective tool for minimizing tort liabilities in connection with the testing and reporting activities that the ACMG recommends.

Võidupüha-Jaanipäeva tähistamine Clevelandis / Hans Ruus

Index Scriptorium Estoniae

Ruus, Hans

2006-01-01

25. juunil Clevelandi Eesti Kultuuraias. Sellel aastal tähistas kultuuraed 40-ndat asutamise aastapäeva. Meenutati monumendi avamist, peakõnelejaks Toomas Tubalkain, mälestati sõjas hukkunud eestlasi

Mis on "Tänapäeva apokalüpsis"? / Kalmer Saar

Index Scriptorium Estoniae

Saar, Kalmer

2006-01-01

Francis Ford Coppola suurfilmi "Tänapäeva apokalüpsis" autoriversioon "Apocalypse Now Redux" (Ameerika Ühendriigid 2001/1979) lõpetab USA kultusfilmide festivali kinos "Sõprus". Lisa : Jaan Ruusi "Apocalypse Now Redux" selgitab autoriversiooni - director's cut - mõistet

IAS15 inflation adjustments and EVA: empirical evidence from a highly variable inflation regime

Directory of Open Access Journals (Sweden)

Pierre Erasmus

2011-08-01

Full Text Available Inflation can have a pronounced effect on the financial performance of a firm. This study makes inflation adjustments to a firm’s cost of sales, depreciation, level of gearing and assets in line with International Accounting Standard 15 (IAS15 in order to calculate an inflation-adjusted version of the economic value added (EVA measure. The study was conducted using data from South African industrial firms during a period characterised by highly variable inflation levels (1991-2005. The results indicate that during this period there were significant differences between the nominal and real values of the firms’ EVAs

Diagnostic criteria for enlarged vestibular aqueduct (EVA) on CT of the temporal bones. Borderline cases of EVA

International Nuclear Information System (INIS)

Matsumoto, Mariko; Hoshino, Tomoyuki; Kikura, Mikino; Kikawada, Keiko; Kikawada, Toru

2005-01-01

The objective of this study was to examine measurements of the vestibular aqueduct on axial CT figures and to examine the cases with borderline EVA. The width of the vestibular aqueduct was measured in two places, the midpoint of the duct and the external aperture in the posterior cranial fossa. Criteria was as follow: Enlargement; ≥1.5 mm at the midpoint, ≥2 mm at the aperture, Borderline; 1-1.4 mm at the midpoint, 1.5-1.9 mm at the aperture. Three hundred forty-five cases with CT scans of the temporal bones taken during July 2003 to June 2004 in the secondary ENT referral center. Those patients include sensorinearal, mixed or conductive deafness, vertigo, ear infections and other ear diseases. Enlarged vestibular aqueduct was found in 10 ears with sensorineural deafness (SD) and 2 ears without SD. Borderline measurements were found in 19 ears with SD and 33 ears without SD. The enlarged midpoint measurement was not seen in the cases without SD. More than 1.5 mm of the definition for the enlargement at the midpoint of the vestibular aqueduct seemed to be appropriate in the clinical situation. The measurement at the midpoint of the duct is more reliable than at the external aperture. The conductive component in EVA Syndrome with mixed hearing loss is present only at the lower frequencies (250, 500 Hz), not at the middle and higer frequencies. Long-term follow-up of hearing should be done in the borderline cases with check-up of PDS gene anomaly if necessary. (author)

Pengaruh Pengungkapan Intellectual Capital (IC dan Economic Value Added (EVA terhadap Harga Saham Perusahaan Manufaktur yang terdaftar di BEI

Directory of Open Access Journals (Sweden)

Achmad Fauzi

2015-07-01

Full Text Available This study aims at finding out if The Influence of Intellectual Capital (ICand Economic Value Added (EVA on Stock Price of Manufacturing Companies listed on the Indonesia Stock Exchange (BEI in 2012. The hypothesis of this study is : There is Influence of Intellectual Capital (IC and Economic Value Added (EVA on Stock Price of Manufacturing Company listed on the Indonesia Stock Exchange (BEI in 2012. The method used is the author of the survey method with a quantitative approach . This study population is the entire manufacturing companies listed on the Stock Exchange in 2012 his sampling technique is random sampling as many as 36 samples .. Correlation Coefficient significance test ( Test A of 0.512 , indicating that there is a middle relationship between IC and EVA on Stock Price. The results of the coefficient of determination ( R2 Test stated that R2 is 0.262 or 26.2% . This shows that the percentage contribution of the effect of independent variables ( IC and EVA on the dependent variable ( stock price of 26.2 % . Or variations of the independent variables used in the model ( IC and EVA are able to explain 26.2% of variation in the dependent variable ( stock price . While the remaining 73.8 % are influenced or explained by other variables not included in this research model .

Utilização de NBR modificada com grupos 2-oxazolina em misturas de NBR/EVA Utilization of 2-oxazoline modified NBR in NBR/EVA blends

Directory of Open Access Journals (Sweden)

Mauricio S. M. Almeida

2003-06-01

Full Text Available Misturas envolvendo borracha nitrílica e copolímeros de etileno-acetato de vinila na proporção 70:30 % em peso, foram preparadas na presença de borracha nitrílica funcionalizada com 2-oxazolina isoladamente ou combinada com EVA funcionalizado com grupos hidroxila, carboxila ou mercaptana. A reação entre os grupos funcionais foi verificada por análise de FTIR da fração insolúvel de amostras não vulcanizadas e pelo decréscimo nos valores de tan delta nos ensaios dinâmico-mecânicos. A utilização desses copolímeros funcionalizados não influenciou significativamente as propriedades mecânicas, provavelmente devido à proporção da mistura utilizada (rica em NBR o que facilita a localização da NBR funcionalizada no interior da fase elastomérica.Nitrile rubber/ethylene-vinyl acetate copolymer (NBR/EVA blends with ratio of 70/30 wt% were prepared in the presence of functionalized NBR with 2-oxazoline groups. This functionalized copolymer was employed alone or in combination with EVA copolymer functionalized with hydroxyl, carboxyl or mercaptan groups. The reaction between the functional groups was confirmed by FTIR analysis of the unvulcanized samples insoluble fraction, and by the decrease in the tan delta values. The mechanical properties were not substantially affected by the presence of these functionalized copolymers, probably due to the proportion of blend composition (with high amount of NBR, thus forcing the location of functionalized NBR inside the elastomer phase.

Analisis Determinasi Financial Performance Perusahaan Industri Manufaktur Makanan Dan Minuman Yang Go Public Suatu Pendekatan Metode Economic Value Added (EVA

Directory of Open Access Journals (Sweden)

Azhar Affandi

2011-04-01

Full Text Available The aim of this study is to obtain empirical evidence concerning the effect of Financial Performance Determinant (Capital Structure and Profit Margin on effectively Economic Value Added (EVA method at the food and beverage manufacture business sectors. The results of this study is expected to contribute for the development of financial management and strategic management. The study was carried out at the food and beverage manufacture business sectors registered in Bursa Efek Indonesia (BEI. The characteristic of this study is confirmatory research. The research method used is associative and explanatory, and to hypothesis testing of the research has used multiple regression. Sampling method is used purposive sampling with total sample are 15 corporate registered in Bursa Efek Indonesia during 2006-2007 period. While for data processing is used SPSS 14.0 for windows programs. The result of this study is: The first hypothesis testing founded theres the significant effect of capital structure on effectively Economic Value Added (EVA. The second hypothesis testing founded theres the significant effect of profit margin on effectively Economic Value Added (EVA. So, in the EVA predicting can used capital structure and profit margin indicators, because capital structure and profit margin both have a significant effect on effectively Economic Value Added (EVA.

ANALISIS PENGARUH EVA DAN MVA TERHADAP RETURN SAHAM PADA INDUSTRI PROPERTI DI BURSA EFEK INDONESIA PERIODE 2007-2012

Directory of Open Access Journals (Sweden)

Ryan Pahlawan

2015-04-01

Full Text Available Abstrak: Tujuan dari penelitian ini adalah untuk mengetahui dan menganalisis: (1 pengaruh Economic Value Added (EVA terhadap return saham (2 pengaruh Market Value Added (MVA terhadap return saham (3 pengaruh Economic Value Added (EVA dan Market Value Added (MVA terhadap return saham antara variabel kinerja keuangan industri properti di Bursa Efek Indonesia pada periode 2007-2012. Kegunaan teoritis adalah untuk memberikan kontribusi tentang pengetahuan manajemen keuangan, yang dapat digunakan sebagai acuan untuk penelitian berikutnya kinerja keuangan terutama tentang industri properti di Bursa Efek Indonesia. Kegunaan praktis adalah untuk mengetahui pengaruh tingkat Economic Value Added (EVA dan Market Value Added (MVA terhadap kinerja keuangan untuk kontribusi memberi kepada manajemen properti umum dalam mengelola variabel kinerja industri properti Bursa Efek Indonesia.Penelitian ini menggunakan data sekunder yang dikumpulkan dari data Bursa Efek Indonesia, dan Departemen Riset menurut sifat laporan keuangan pada periode 2007-2012. Sampel adalah 54 variabel dan dianalisis dengan regresi berganda metode statistik linier. Total nilai determinasi adalah 0,368, artinya ini adalah 36,8% informasi dalam data dapat dijelaskan oleh model dan 63,2% di bawah variabel lain dan error. Kesimpulan dari penelitian ini adalah: (1 Variabel Economic Value Added (EVA berpengaruh positif terhadap return saham; (2 Variabel Market Value Added (MVA memiliki pengaruh negatif terhadap Return Saham; Mengacu pada kesimpulan penelitian diatas maka disarankan adalah: (1 Dioptimalkan Economic Value Added (EVA untuk mencapai pendapatan dan keuntungan dari return saham (2 Mengelola Variabel Market Value Added (MVA pada kondisi baik untuk menjaga stabilitas keuangan dan mendapatkan dipercaya dari investor Bursa Efek Indonesia (3 Fokus ke Manajemen Risiko, Jasa, perusahaan Visi & Misi, dan Active keterampilan dan pengetahuan karyawan perusahaan yang lebih tinggi untuk

Architectures/Algorithms/Tools for Ultra-Low Power, Compact EVA Digital Radio, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The EVA digital radio imposes tight constraints on power consumption, latency, throughput, form factor, reconfigurability, single event upset and fault tolerance,...

STS-31 crew training: firefighting, food tasting, EVA prep and post

Science.gov (United States)

1990-03-01

The Space Shuttle crew is shown lighting a pond of gasoline and then performing firefighting tasks. The crew is also shown tasting food including lemonade, chicken casserole, and tortillas, and performing extravehicular activity (EVA) equipment checkouts in the CCT middeck and airlock.

Unique Capabilities of the Situational Awareness Sensor Suite for the ISS (SASSI) Mission Concept to Study the Equatorial Ionosphere

Science.gov (United States)

Habash Krause, L.; Gilchrist, B. E.; Minow, J. I.; Gallagher, D. L.; Hoegy, W. R.; Coffey, V. N.; Willis, E. M.

2014-12-01

We present an overview of a mission concept named Situational Awareness Sensor Suite for the ISS (SASSI) with a special focus here on low-latitude ionospheric plasma turbulence measurements relevant to equatorial spread-F. SASSI is a suite of sensors that improves Space Situational Awareness for the ISS local space environment, as well as unique ionospheric measurements and support active plasma experiments on the ISS. As such, the mission concept has both operational and basic research objectives. We will describe two compelling measurement techniques enabled by SASSI's unique mission architecture. That is, SASSI provides new abilities to 1) measure space plasma potentials in low Earth orbit over ~100 m relative to a common potential, and 2) to investigate multi-scale ionospheric plasma turbulence morphology simultaneously of both ~ 1 cm and ~ 10 m scale lengths. The first measurement technique will aid in the distinction of vertical drifts within equatorial plasma bubbles from the vertical motions of the bulk of the layer due to zonal electric fields. The second will aid in understanding ionospheric plasma turbulence cascading in scale sizes that affect over the horizon radar. During many years of ISS operation, we have conducted effective (but not perfect) human and robotic extravehicular activities within the space plasma environment surrounding the ISS structure. However, because of the complexity of the interaction between the ISS and the space environment, there remain important sources of unpredictable environmental situations that affect operations. Examples of affected systems include EVA safety, solar panel efficiency, and scientific instrument integrity. Models and heuristically-derived best practices are well-suited for routine operations, but when it comes to unusual or anomalous events or situations, there is no substitute for real-time monitoring. SASSI is being designed to deploy and operate a suite of low-cost, medium/high-TRL plasma sensors on

Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices

DEFF Research Database (Denmark)

Genina, Natalja; Hollander, Jenny; Jukarainen, Harri

2016-01-01

The main purpose of this work was to investigate the printability of different grades of ethylene vinyl acetate (EVA) copolymers as new feedstock material for fused-deposition modeling (FDM™)-based 3D printing technology in fabrication of custom-made T-shaped intrauterine systems (IUS......) and subcutaneous rods (SR). The goal was to select an EVA grade with optimal properties, namely vinyl acetate content, melting index, flexural modulus, for 3D printing of implantable prototypes with the drug incorporated within the entire matrix of the medical devices. Indomethacin was used as a model drug...... affected the drug release profiles from the filaments and printed prototype products: faster release from the prototypes over 30 days in the in vitro tests. To conclude, this study indicates that certain grades of EVA were applicable feedstock material for 3D printing to produce drug-loaded implantable...

Use of the Remote Access Virtual Environment Network (RAVEN) for coordinated IVA-EVA astronaut training and evaluation.

Science.gov (United States)

Cater, J P; Huffman, S D

1995-01-01

This paper presents a unique virtual reality training and assessment tool developed under a NASA grant, "Research in Human Factors Aspects of Enhanced Virtual Environments for Extravehicular Activity (EVA) Training and Simulation." The Remote Access Virtual Environment Network (RAVEN) was created to train and evaluate the verbal, mental and physical coordination required between the intravehicular (IVA) astronaut operating the Remote Manipulator System (RMS) arm and the EVA astronaut standing in foot restraints on the end of the RMS. The RAVEN system currently allows the EVA astronaut to approach the Hubble Space Telescope (HST) under control of the IVA astronaut and grasp, remove, and replace the Wide Field Planetary Camera drawer from its location in the HST. Two viewpoints, one stereoscopic and one monoscopic, were created all linked by Ethernet, that provided the two trainees with the appropriate training environments.

The importance of ROE for calculating EVA Equity: the case of Motor Jikov Strojírenská, a.s.

Directory of Open Access Journals (Sweden)

Mareček Jan

2017-01-01

Full Text Available A remarkable success depends on a variety of factors, one of which is the ability to motivate the employees, increasing motivation of managers, measuring business processes and measuring and observing values of the company. The tangible results are also shown by the indicator of return on equity (ROE. The article aims at reflecting the importance of ROE for the EVA Equity (economic value added for shareholders calculation of Motor Jikov Strojírenská, a.s. The data come from Albertina database. These are details of financial statements from 2000-2015. As a matter of fact, weighted average costs of capital, alternative cost value of equity capital and EVA Equity are calculated. Software Statistica and its sophisticated tool data mining - automated neural networks was used for finding a correlation between EVA Equity indicator and ROE. In addition, 10,000 neural networks were generated, five of which with the best results have been stored. The results show that EVA Equity is not dependent on the ROE rate.

Flame retardancy and thermal behavior of intumescent flame-retardant EVA composites with an efficient triazine-based charring agent

Science.gov (United States)

Xu, Bo; Ma, Wen; Wu, Xiao; Qian, Lijun; Jiang, Shan

2018-04-01

Intumescent flame retardant (IFR) EVA composites were prepared based on a hyperbranched triazine charring-foaming agent (HTCFA) and ammonium polyphosphate (APP). The synergistic effect of HTCFA and APP on the flame retardancy and thermal behavior of the composites were investigated through flammability tests, cone calorimeter measurements, thermogravimetric analysis (TGA) including evolved gas analysis (TG-IR) and residue analysis (Fourier transform infrared (FTIR), laser Raman spectroscopy (LRS), x-ray Photoelectron Spectroscopy (XPS) and scanning electron microscopy (SEM)). The flammability test results showed HTCFA/APP (1/3) system presented the best synergistic effect in flame-retardant EVA composites with the highest LOI value and UL-94 V-0 rating. As for cone calorimeter results, IFR changed the combustion behavior of EVA and resulted in remarkable decrease of flammability and smoke product. TGA results showed the synergistic effect between APP and HTCFA could strengthen the char-forming ability of composites. TG-IR results indicated the melt viscosities and gas release with increasing temperature were well-correlated for EVA/IFR composite. The residue analysis results from SEM, LRS, FT-IR and XPS revealed IFR promoted forming more compact graphitic char layer, connected by rich P–O–C and P–N structures.

Korp! Filiae Patriae 85. aastapäeva pidustused Los Angeleses / Lumme Erilt

Index Scriptorium Estoniae

Erilt, Lumme

2005-01-01

5. novembril 2005 tähistas Filiae Patriae Kalifornia koondis Los Angelese Eesti Majas piduliku õestuspeo ning ühise perekonnaõhtuga koos korp! Rotaliaga aastapäeva. Peeti kõnesid, oli tervitusi, muusikat, palju lilli

EVA – a non-linear Eulerian approach for assessment of health-cost externalities of air pollution

DEFF Research Database (Denmark)

Andersen, Mikael Skou; Frohn, Lise Marie; Nielsen, Jytte Seested

2006-01-01

of the emissions. External cost estimates based on the Eulerian approach, on the other hand, are in mutual conformity. The existence of non-linear dynamics and possible thresholds, both in the atmospheric modelling and in the dose-response functions for health effects, need further attention and should......Integrated models which are used to account for the external costs of air pollution have to a considerable extent ignored the non-linear dynamics of atmospheric science. In order to bridge the gap between economic analysis and environmental modelling an integrated model EVA, based on a Eulerian...... for the final external cost estimates of the Eulerian approach is explored. Uncertainties in the health costs estimates are endemic in particular for mortality, but in order to achieve a common baseline the approach recommended by the OECD has been employed for the valuation part. This approach implies the use...

Durable Suit Bladder with Improved Water Permeability for Pressure and Environment Suits

Science.gov (United States)

Bue, Grant C.; Kuznetz, Larry; Orndoff, Evelyne; Tang, Henry; Aitchison, Lindsay; Ross, Amy

2009-01-01

Water vapor permeability is shown to be useful in rejecting heat and managing moisture accumulation in launch-and-entry pressure suits. Currently this is accomplished through a porous Gortex layer in the Advanced Crew and Escape Suit (ACES) and in the baseline design of the Constellation Suit System Element (CSSE) Suit 1. Non-porous dense monolithic membranes (DMM) that are available offer potential improvements for water vapor permeability with reduced gas leak. Accordingly, three different pressure bladder materials were investigated for water vapor permeability and oxygen leak: ElasthaneTM 80A (thermoplastic polyether urethane) provided from stock polymer material and two custom thermoplastic polyether urethanes. Water vapor, carbon dioxide and oxygen permeability of the DMM's was measured in a 0.13 mm thick stand-alone layer, a 0.08 mm and 0.05 mm thick layer each bonded to two different nylon and polyester woven reinforcing materials. Additional water vapor permeability and mechanical compression measurements were made with the reinforced 0.05 mm thick layers, further bonded with a polyester wicking and overlaid with moistened polyester fleece thermal underwear .This simulated the pressure from a supine crew person. The 0.05 mm thick nylon reinforced sample with polyester wicking layer was further mechanically tested for wear and abrasion. Concepts for incorporating these materials in launch/entry and Extravehicular Activity pressure suits are presented.

Vibrotactile perception assessment for a haptic interface on an antigravity suit.

Science.gov (United States)

Ko, Sang Min; Lee, Kwangil; Kim, Daeho; Ji, Yong Gu

2017-01-01

Haptic technology is used in various fields to transmit information to the user with or without visual and auditory cues. This study aimed to provide preliminary data for use in developing a haptic interface for an antigravity (anti-G) suit. With the structural characteristics of the anti-G suit in mind, we determined five areas on the body (lower back, outer thighs, inner thighs, outer calves, and inner calves) on which to install ten bar-type eccentric rotating mass (ERM) motors as vibration actuators. To determine the design factors of the haptic anti-G suit, we conducted three experiments to find the absolute threshold, moderate intensity, and subjective assessments of vibrotactile stimuli. Twenty-six fighter pilots participated in the experiments, which were conducted in a fixed-based flight simulator. From the results of our study, we recommend 1) absolute thresholds of ∼11.98-15.84 Hz and 102.01-104.06 dB, 2) moderate intensities of 74.36 Hz and 126.98 dB for the lower back and 58.65 Hz and 122.37 dB for either side of the thighs and calves, and 3) subjective assessments of vibrotactile stimuli (displeasure, easy to perceive, and level of comfort). The results of this study will be useful for the design of a haptic anti-G suit. Copyright © 2016 Elsevier Ltd. All rights reserved.

Eesti Vabariigi 89. aastapäeva tähistamine

Index Scriptorium Estoniae

2007-01-01

Eesti iseseisvuspäeva tähistamisest Londonis. 20. veebruaril 2007 korraldas Eesti Vabariigi suursaatkond vastuvõtu Crown Plaza hotellis, kus ligi 300 külalist tervitas president Toomas Hendrik Ilves. 19. veebruaril 2007 külastas president Oxfordi, kus ta esines kõnega üliõpilastele. Lisatud foto, millel on kujutatud president Toomas Hendrik Ilves, kolonelleitnant Lauri Einre ja Eesti Vabariigi saadik Londonis dr. Margus Laidre

Negative Statements in Letters of Recommendation: From Defamation to Defense.

Science.gov (United States)

Clear, Delbert K.

1978-01-01

The law clearly provides protection for those who write negative recommendations; however, the standard tests for libel and slander that are used in tort suits where damages are sought for defamation of character are applicable. (Author/MLF)

Robonaut 2 - IVA Experiments On-Board ISS and Development Towards EVA Capability

Science.gov (United States)

Diftler, Myron; Hulse, Aaron; Badger, Julia; Thackston, Allison; Rogers, Jonathan

2014-01-01

Robonaut 2 (R2) has completed its fixed base activities on-board the ISS and is scheduled to receive its climbing legs in early 2014. In its continuing line of firsts, the R2 torso finished up its on-orbit activities on its stanchion with the manipulation of space blanket materials and performed multiple tasks under teleoperation control by IVA astronauts. The successful completion of these two IVA experiments is a key step in Robonaut's progression towards an EVA capability. Integration with the legs and climbing inside the ISS will provide another important part of the experience that R2 will need prior to performing tasks on the outside of ISS. In support of these on-orbit activities, R2 has been traversing across handrails in simulated zero-g environments and working with EVA tools and equipment on the ground to determine manipulation strategies for an EVA Robonaut. R2 made significant advances in robotic manipulation of deformable materials in space while working with its softgoods task panel. This panel features quarter turn latches that secure a space blanket to the task panel structure. The space blanket covers two cloth cubes that are attached with Velcro to the structure. R2 was able to open and close the latches, pull back the blanket, and remove the cube underneath. R2 simulated cleaning up an EVA worksite as well, by replacing the cube and reattaching the blanket. In order to interact with the softgoods panel, R2 has both autonomously and with a human in the loop identified and localized these deformable objects. Using stereo color cameras, R2 identified characteristic elements on the softgoods panel then extracted the location and orientation of the object in its field of view using stereo disparity and kinematic transforms. R2 used both vision processing and supervisory control to successfully accomplish this important task. Teleoperation is a key capability for Robonaut's effectiveness as an EVA system. To build proficiency, crewmembers have

Tähistame Helen Kelleri 130. sünniaastapäeva

Index Scriptorium Estoniae

Keskküla, Raissa

2010-01-01

Helen Kellerist ja tema sünniaastapäeva tähistamisest, samuti Eesti Pimekurtide Tugiliidu ettevõtmistest: koostöölepingust Eesti Kujurite Ühendusega, punktkirjas väljaantud raamatust "Õppimise ime", Hilton/Perkins programmi kaasabil Eesti pimekurtide ja nägemis-liitpuudega lastega töötavate õpetajate ning töötajate koolitamiset

"Nad olid nuhkinud meie pulmapäeva välja!" / Aigi Viira

Index Scriptorium Estoniae

Viira, Aigi

2004-01-01

Vanemuise teatri draamajuht andis näitlejatest abielupaarile Herta Elvistele ja Lembit Eelmäele peale L. Razumovskaja näidendi "Vladimiri väljak" 30. okt. etendust üle lilled ja õnnitlused 50. pulma-aastapäeva puhul

The influence of Ca-Mg-Al hydrotalcite synthesized from brine water on thermal and mechanical properties of HTlc-EVA composite

International Nuclear Information System (INIS)

Karina, Wiwiek; Heraldy, Eddy; Pramono, Edi; Heriyanto,; Astuti, Shanti

2016-01-01

Ca-Mg-Al hydrotalcite-like compound (Ca-Mg-Al HTlc) was prepared by co-precipitation method using brine water that is well known as the desalination process waste water. The structure of Ca-Mg-Al HTlc was determined by X-Ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) analysis. Ca-Mg-Al HTlc was studied as a non-halogenated filler in ethylene vinyl acetate (EVA) matrix. Composites with different filler concentrations were prepared to evaluate the influence of Ca-Mg-Al HTlc on thermal and mechanical properties of EVA.The presence of Ca-Mg-Al HTlc in the composite has been confirmed by FTIR analysis. Thermal properties of composites show significant reduction of degradation temperature as well as the loading of HTlc in EVA. However, the total enthalpies combustion of composites with 1% and 5% HTlc loadings higher compared to neat EVA. Further, mechanical properties were determined by tensile test. The result shows that tensile strength and elongation at break of composites decrease relatively by Ca-Mg-Al HTlc addition

The influence of Ca-Mg-Al hydrotalcite synthesized from brine water on thermal and mechanical properties of HTlc-EVA composite

Energy Technology Data Exchange (ETDEWEB)

Karina, Wiwiek, E-mail: wiekarina@gmail.com; Heraldy, Eddy, E-mail: eheraldy@gmail.com; Pramono, Edi; Heriyanto,; Astuti, Shanti [Department of Chemistry, Faculty of Mathematics and Natural Sciences, Sebelas Maret University Jl. Ir. Sutami 36A, Kentingan, Surakarta 57126 (Indonesia)

2016-02-08

Ca-Mg-Al hydrotalcite-like compound (Ca-Mg-Al HTlc) was prepared by co-precipitation method using brine water that is well known as the desalination process waste water. The structure of Ca-Mg-Al HTlc was determined by X-Ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) analysis. Ca-Mg-Al HTlc was studied as a non-halogenated filler in ethylene vinyl acetate (EVA) matrix. Composites with different filler concentrations were prepared to evaluate the influence of Ca-Mg-Al HTlc on thermal and mechanical properties of EVA.The presence of Ca-Mg-Al HTlc in the composite has been confirmed by FTIR analysis. Thermal properties of composites show significant reduction of degradation temperature as well as the loading of HTlc in EVA. However, the total enthalpies combustion of composites with 1% and 5% HTlc loadings higher compared to neat EVA. Further, mechanical properties were determined by tensile test. The result shows that tensile strength and elongation at break of composites decrease relatively by Ca-Mg-Al HTlc addition.

Development of Power Assisting Suit

Science.gov (United States)

Yamamoto, Keijiro; Ishii, Mineo; Hyodo, Kazuhito; Yoshimitsu, Toshihiro; Matsuo, Takashi

In order to realize a wearable power assisting suit for assisting a nurse to carry a patient in her arms, the power supply and control systems of the suit have to be miniaturized, and it has to be wireless and pipeline-less. The new wearable suit consists of shoulders, arms, back, waist and legs units to be fitted on the nurse's body. The arms, waist and legs have new pneumatic rotary actuators driven directly by micro air pumps supplied by portable Ni-Cd batteries. The muscle forces are sensed by a new muscle hardness sensor utilizing a sensing tip mounted on a force sensing film device. An embedded microcomputer is used for the calculations of control signals. The new wearable suit was applied practically to a human body and a series of movement experiments that weights in the arms were held and taken up and down was performed. Each unit of the suit could transmit assisting torque directly to each joint verifying its practicability.

Kunstnikuks pürgija vajab paari õigeaegset impulssi / Kaido Ole, Eva Unt

Index Scriptorium Estoniae

Ole, Kaido

2006-01-01

Antonia Claudio Carvalho meistriklass "Ava oma silmad/Open Your Eyes" 23.-27. I ja näitus 27. I-9. II Eesti Kunstiakadeemia galeriis. Meistriklassist vestlesid EKA maaliosakonna juhataja Kaido Ole ja maalieriala III kursuse üliõpilane Eva Unt

Impact of Mars sand on dust on the design of space suits and life support equipment: A technology assessment

Science.gov (United States)

Simonds, Charles H.

1991-01-01

Space suits and life support equipment will come in intimate contact with Martian soil as aerosols, wind blown particles and material thrown up by men and equipment on the Martian surface. For purposes of this discussion the soil is assumed to consist of a mixture of cominuted feldspar, pyroxene, olivine, quartz, titanomagnetite and other anhydrous and hydrous iron bearing oxides, clay minerals, scapolite and water soluble chlorides and sulfates. The soil may have photoactivated surfaces that acts as a strong oxidizer with behavior similar to hydrogen peroxide. The existing data about the Mars soil suggests that the dust and sand will require designs analogous to those uses on equipment exposed to salty air and blowing sand and dust. The major design challenges are in developing high performance radiators which can be cleaned after each EVA without degradation, designing seals that are readily cleaned and possibly in selecting materials which will not be degraded by any strong oxidants in the soil. The magnitude of the dust filtration challenge needs careful evaluation in terms of the trade off between fine-particle dust filters with low pressure drop that are either physically large and heavy, like filter baghouses require frequent replacement of filter elements, of low volume high pressure thus power consumption approaches, or washable filters. In the latter, filter elements are cleaned with water, as could the outsides of the space suits in the airlock.

Impact of Mars sand on dust on the design of space suits and life support equipment: A technology assessment

Science.gov (United States)

Simonds, Charles H.

1991-05-01

Space suits and life support equipment will come in intimate contact with Martian soil as aerosols, wind blown particles and material thrown up by men and equipment on the Martian surface. For purposes of this discussion the soil is assumed to consist of a mixture of cominuted feldspar, pyroxene, olivine, quartz, titanomagnetite and other anhydrous and hydrous iron bearing oxides, clay minerals, scapolite and water soluble chlorides and sulfates. The soil may have photoactivated surfaces that acts as a strong oxidizer with behavior similar to hydrogen peroxide. The existing data about the Mars soil suggests that the dust and sand will require designs analogous to those uses on equipment exposed to salty air and blowing sand and dust. The major design challenges are in developing high performance radiators which can be cleaned after each EVA without degradation, designing seals that are readily cleaned and possibly in selecting materials which will not be degraded by any strong oxidants in the soil. The magnitude of the dust filtration challenge needs careful evaluation in terms of the trade off between fine-particle dust filters with low pressure drop that are either physically large and heavy, like filter baghouses require frequent replacement of filter elements, of low volume high pressure thus power consumption approaches, or washable filters. In the latter, filter elements are cleaned with water, as could the outsides of the space suits in the airlock.

E VA Space Suit Power, Avionics, and Software Systems, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — NASA is interested in a reliable, robust, and low Size Weight and Power (SWAP) input device that will allow for EVA astronauts to navigate display menu systems. The...

Klíčové ukazatele výkonnosti (KPI) a jejich vazba na vrcholový ukazatel EVA

OpenAIRE

Hanzlík, Kamil

2008-01-01

This thesis is concerned with a discussion of advantages, disadvantages and potencial areas of usage of the Economic Value Added (EVA) as a measure of value based management. The coherency of EVA with key performance indicators as a tool of effective management is also analysed. Mentioned are also several alternative concepts. This thesis further analyses practical application of key performance indicators in mobile telecommunication company T-Mobile and evaluates the implemented concept of E...

Space Suit Joint Torque Testing

Science.gov (United States)

Valish, Dana J.

2011-01-01

In 2009 and early 2010, a test was performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design meets the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future space suits. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis and a variance in torque values for some of the tested joints was apparent. Potential variables that could have affected the data were identified and re-testing was conducted in an attempt to eliminate these variables. The results of the retest will be used to determine if further testing and modification is necessary before the method can be validated.

Taasleitud kadunud ja unustatud kino / Jonathan L. Owen ; tõlkinud Eva Näripea

Index Scriptorium Estoniae

Owen, Jonathan L.

2011-01-01

Arvustus: Via Transversa : Lost cinema of the former Eastern bloc. Eds. Eva Näripea, Andreas Trossek. Special issue of Koht ja paik/Place and location :Studies in environmental aesthetics and semiotics VII. Tallinn, 2008

Imposto de importação e evasão fiscal: uma investigação do caso brasileiro

Directory of Open Access Journals (Sweden)

Maria da Conceição Sampaio de Sousa

2008-03-01

Full Text Available Este trabalho mensura o impacto das alíquotas do imposto de importação sobre a evasão fiscal nas importações brasileiras oriundas dos Estados Unidos. Os resultados obtidos permitem concluir que as alíquotas tarifárias influenciam a evasão sob suas diferentes formas: subfaturamento e classificação incorreta de mercadorias. Estes resultados corroboram o modelo básico de evasão proposto por Allingham (1972 e se insere no debate sobre a relação entre a magnitude das alíquotas e o potencial para evasão. Nossos resultados mostram, ainda, a existência de não linearidades na relação entre alíquotas e evasão. Nos vários modelos testados, esse efeito cresce com a magnitude das tarifas, sugerindo que maiores alíquotas aumentam o custo de oportunidade da tributação e geram maiores incentivos para a sonegação. Por fim, com respeito à relação entre o nível de complexidade da estrutura tributária e a evasão, nosso trabalho sugere que uma maior diferenciação entre alíquotas, dificulta a administração tarifária e pode levar a evasão.In this paper we measure the effect of tax rates on tax evasion using data on the trade flow between Brazil and the United States. Our results show that increases in the tax rates lead to higher evasion on two different ways: under invoicing and mislabeling higher taxed products as lower ones. These results corroborate the theoretical predictions of the Allingham (1972 model and contribute to the recent debate on the influence of tax rates on evasion. We also point out to the existence of nonlinearities in the relationship between tax rates and evasion by showing that higher rates raise the opportunity costs of paying taxes and thus encourage evasion. Finally, our results suggest that relatively high rates and a complex set of rules, especially for customs taxes, result in large potential rewards for taxpayers willing to bribe to cut their own tax burden and/or speed up customs clearance of

Analysis by X-Ray images of EVA waste incorporated in Portland Cement

International Nuclear Information System (INIS)

Marques, M.A.; Antunes, M.L.P.; Montagnoli, R.M.; Mancini, S.D.

2012-01-01

The EVA is a copolymer used by Brazilian shoes industries. This material is cut for the manufacture of insoles. This operation generates about 18% of waste. The EVA waste can be reused in incorporation in Portland cement to construction without structural purposes. The aim of this work is to show X-rays images to assessment the space distribution of the wastes in the cement and to evaluate the use of this methodology. Cylindrical specimens were produced according to ABNT - NBR 5738 standards. The volume relation of sand and cement was 3:1, 10% and 30% of waste was incorporated in cement specimens. X-Rays images were obtained of cylindrical specimens in front projection. The images showed that the distribution of the waste is homogeneous, consistent with what was intended in this type of incorporation, which can provide uniformity in test results of compressive strength. (author)

Evaluating Suit Fit Using Performance Degradation

Science.gov (United States)

Margerum, Sarah E.; Cowley, Matthew; Harvill, Lauren; Benson, Elizabeth; Rajulu, Sudhakar

2011-01-01

The Mark III suit has multiple sizes of suit components (arm, leg, and gloves) as well as sizing inserts to tailor the fit of the suit to an individual. This study sought to determine a way to identify the point an ideal suit fit transforms into a bad fit and how to quantify this breakdown using mobility-based physical performance data. This study examined the changes in human physical performance via degradation of the elbow and wrist range of motion of the planetary suit prototype (Mark III) with respect to changes in sizing and as well as how to apply that knowledge to suit sizing options and improvements in suit fit. The methods implemented in this study focused on changes in elbow and wrist mobility due to incremental suit sizing modifications. This incremental sizing was within a range that included both optimum and poor fit. Suited range of motion data was collected using a motion analysis system for nine isolated and functional tasks encompassing the elbow and wrist joints. A total of four subjects were tested with motions involving both arms simultaneously as well as the right arm only. The results were then compared across sizing configurations. The results of this study indicate that range of motion may be used as a viable parameter to quantify at what stage suit sizing causes a detriment in performance; however the human performance decrement appeared to be based on the interaction of multiple joints along a limb, not a single joint angle. The study was able to identify a preliminary method to quantify the impact of size on performance and to develop a means to gauge tolerances around optimal size. More work is needed to improve the assessment of optimal fit and to compensate for multiple joint interactions.

'Seal, kus oleme meie, on muuseum!' ; Eva ja Adele Helsingis / interv. Heie Treier

Index Scriptorium Estoniae

1998-01-01

Elavad skulptuurid Saksamaalt Eva ja Adele etendasid moodsa kunsti muuseumi Kiasma avamisel performance'it 'Seal, kus oleme meie, on muuseum'. Intervjuu kunstnikega. Kunstnikepaarist, nende eesmärgist, millistes maades võetakse neid kergemini vastu, Kiasmast jm

Evidências empirícas sobre a relação entre EVA e Retorno Acionário nas empresas brasileiras - Empirical evidence on the relationship beween EVA and Stock Returns in brazilian firms

Directory of Open Access Journals (Sweden)

Otavio Ribeiro de Medeiros

2009-05-01

Full Text Available Este artigo fornece evidências empíricas sobre a relação entre Valor Econômico Adicionado (EVA e retornos acionários de empresas brasileiras. A relação entre essas variáveis têm sido motivo de controvérsia nos últimos anos, com alguns autores encontrando associações significativas entre elas, enquanto outros não encontrando nenhuma. A hipótese de que o EVA afeta os retornos acionários é testada através de regressão linear, utilizando-se modelos alternativos. A amostra é composta de empresas negociadas na mais importante bolsa de valores brasileira. Uma comparação entre os resultados deste estudo com os de estudos anteriores mostram que resultados significativos dependem da determinação das variáveis apropriadas (retornos acionários versus preços das ações, bem como da correta relação dinâmica entre a variável dependente e a independente. This paper provides empirical evidence on the relationship between Economic Value Added (EVA and stock returns in Brazilian firms. This relationship between these variables has been subject to controversy in recent years, with some authors finding significant associations between them while others find none. The hypothesis that EVA affects stock returns is tested through linear regression, using alternative models. The sample is comprised of companies that are traded on the most important Brazilian stock exchange. A comparison of the outcomes of our study with those of previous studies shows that significant results depend on determination of the appropriate variables (stock returns versus stock prices, as well as of the correct dynamic structure between the dependent and the explanatory variable.

Overview of Human Factors and Habitability at NASA

Science.gov (United States)

Connolly, Janis; Arch, M.; Kaiser, Mary

2009-01-01

This slide presentation reviews the ongoing work on human factors and habitability in the development of the Constellation Program. The focus of the work is on how equipment, spacecraft design, tools, procedures and nutrition be used to improve the health, safety and efficiency of the crewmembers. There are slides showing the components of the Constellation Program, and the conceptual designs of the Orion Crew module, the lunar lander, (i.e., Altair) the microgravity EVA suit, and the lunar surface EVA suit, the lunar rover, and the lunar surface system infrastructure.

Farewell Jean-Marie Good Luck Eva Welcome back Franz

CERN Multimedia

2001-01-01

At the farewell reception offered by the Director-General, Professor Luciano Maiani, on the occasion of Jean-Marie Dufour's retirement from CERN, three generations of CERN Legal Counsel met. From right to left: Jean-Marie Dufour, who retires on 30 November 2001, after 35 years of service. Eva-Maria Gröniger-Voss, who takes over from Jean-Marie Dufour on 1st December 2001. Ambassador Franz Schmid, CERN Legal Counsel from 1971 to 1974.

Tänapäeva muinasjutt : [lühijutud] / Kris, Moor, pseud.

Index Scriptorium Estoniae

Kris Moor, pseud.

2007-01-01

Sisu: Imagine an actor saying following ; algus ; korralikud tüdrukud ; Provokatsioon ; absoluutselt täiuslik ; sigaret ; best friends ; probleem ; Tere Kris ; kirjutis ; armastus ; Elluastuja ; oeh ; klishee ; happy neverending story ; tungid ja tungisaatused ; noh ; lohe ; the art of noise ; latentsus ; Lühikokkuvõte tänapäeva muinasjutust: (ilma ilukirjandusliku liialduseta)

Keskkonnamiljardär pidas sünnipäeva / Toivo Räägel

Index Scriptorium Estoniae

Räägel, Toivo, 1956-

2005-01-01

Viiendat sünnipäeva tähistanud Keskkonnainvesteeringute Keskus (KIK) on oma tegutsemisaja jooksul investeerinud keskkonda 1,4 miljardit krooni ning vahendanud ühtekuuluvusfondi ISPA raha 575 miljonit krooni eest. Lisa: KIKi rahastatud projektid Raplamaal

Human skin in vitro permeation of bentazon and isoproturon formulations with or without protective clothing suit.

Science.gov (United States)

Berthet, Aurélie; Hopf, Nancy B; Miles, Alexandra; Spring, Philipp; Charrière, Nicole; Garrigou, Alain; Baldi, Isabelle; Vernez, David

2014-01-01

Skin exposures to chemicals may lead, through percutaneous permeation, to a significant increase in systemic circulation. Skin is the primary route of entry during some occupational activities, especially in agriculture. To reduce skin exposures, the use of personal protective equipment (PPE) is recommended. PPE efficiency is characterized as the time until products permeate through material (lag time, Tlag). Both skin and PPE permeations are assessed using similar in vitro methods; the diffusion cell system. Flow-through diffusion cells were used in this study to assess the permeation of two herbicides, bentazon and isoproturon, as well as four related commercial formulations (Basagran(®), Basamais(®), Arelon(®) and Matara(®)). Permeation was measured through fresh excised human skin, protective clothing suits (suits) (Microchem(®) 3000, AgriSafe Pro(®), Proshield(®) and Microgard(®) 2000 Plus Green), and a combination of skin and suits. Both herbicides, tested by itself or as an active ingredient in formulations, permeated readily through human skin and tested suits (Tlag < 2 h). High permeation coefficients were obtained regardless of formulations or tested membranes, except for Microchem(®) 3000. Short Tlag, were observed even when skin was covered with suits, except for Microchem(®) 3000. Kp values tended to decrease when suits covered the skin (except when Arelon(®) was applied to skin covered with AgriSafe Pro and Microgard(®) 2000), suggesting that Tlag alone is insufficient in characterizing suits. To better estimate human skin permeations, in vitro experiments should not only use human skin but also consider the intended use of the suit, i.e., the active ingredient concentrations and type of formulations, which significantly affect skin permeation.

Study of montmorillonite nanoparticles and electron beam irradiation interaction of ethylene vinyl acetate (EVA)/de-vulcanized waste rubber thermoplastic composites

Science.gov (United States)

Bee, Soo-Tueen; Sin, Lee Tin; Hoe, Tie Teck; Ratnam, C. T.; Bee, Soo Ling; Rahmat, A. R.

2018-05-01

The purpose of this work was to investigate the effects of montmorillonite (MMT) loading level and electron beam irradiation on the physical-mechanical properties and thermal stability of ethylene vinyl acetate (EVA)- devulcanised waste rubber blends. The addition of MMT particles has significantly increased the d-spacing and interchain separation of deflection peak (0 0 2) of MMT particles. This indicates that MMT particles have effectively intercalated in polymer matrix of EVA-devulcanised waste rubber blends. Besides, the application of electron beam irradiation dosages <150 kGy could also significantly induce the effective intercalation effect of MMT particles in polymer matrix by introducing crosslinking networks. The increasing of electron beam irradiation dosages up to 250 kGy has gradually increased the gel content of all EVA-devulcanized rubber blends by inducing the formation of crosslinking networks in polymer matrix. Also, the tensile strength of all EVA-devulcanized waste rubber blends was gradually increased when irradiated up to 150 kGy. This is due to the occurrence of crosslinking networks by irradiation could significantly provide reinforcement effect to polymer matrix by effectively transferring the stress applied on polymer matrix throughout the whole polymer matrix.

Quebra de dormência de gemas de macieira cv. Eva tratadas com cianamida hidrogenada

Directory of Open Access Journals (Sweden)

CRUZ JÚNIOR ÁLVARO DE OLIVEIRA

2002-01-01

Full Text Available A maioria das cultivares de macieiras plantadas no Brasil apresentam deficiência e desuniformidade de brotação, devido à má distribuição e/ou baixo número de horas de frio abaixo de 7,2masculine C, constituindo-se num entrave à produtividade. Mesmo utilizando-se de cultivares de baixa exigência de frio invernal, como a cultivar Eva, tem-se verificado a necessidade de se fazer a quebra de dormência para uniformizar a brotação, compatibilizar o florescimento e antecipar e melhorar a produção em regiões com invernos amenos ou anos de baixo acúmulo de frio. Avaliou-se o efeito da aplicação de cianamida hidrogenada em três diferentes concentrações (0,5; 1,0 e 1,5 % associada ao óleo mineral (3% na brotação de gemas laterais e terminais de macieiras da cv. Eva, e a fenologia das cvs. Eva e Anabela. Concluiu-se que a concentração de cianamida hidrogenada influi na percentagem de gemas laterais e terminais brotadas, sendo a concentração de 1,5% de cianamida hidrogenada associada a 3% de óleo mineral a mais efetiva na quebra da dormência das gemas

Adobe Creative Suite 4 Bible

CERN Document Server

Padova, Ted

2009-01-01

As one of the few books to cover integration and workflow issues between Photoshop, Illustrator, InDesign, GoLive, Acrobat, and Version Cue, this comprehensive reference is the one book that Creative Suite users need; Two well-known and respected authors cover topics such as developing consistent color-managed workflows, moving files among the Creative Suite applications, preparing files for print or the Web, repurposing documents, and using the Creative Suite with Microsoft Office documents; More than 1,200 pages are packed with valuable advice and techniques for tackling common everyday issu

The MADD-3 LAMMER Kinase Interacts with a p38 MAP Kinase Pathway to Regulate the Display of the EVA-1 Guidance Receptor in Caenorhabditis elegans.

Directory of Open Access Journals (Sweden)

Serena A D'Souza

2016-04-01

Full Text Available The proper display of transmembrane receptors on the leading edge of migrating cells and cell extensions is essential for their response to guidance cues. We previously discovered that MADD-4, which is an ADAMTSL secreted by motor neurons in Caenorhabditis elegans, interacts with an UNC-40/EVA-1 co-receptor complex on muscles to attract plasma membrane extensions called muscle arms. In nematodes, the muscle arm termini harbor the post-synaptic elements of the neuromuscular junction. Through a forward genetic screen for mutants with disrupted muscle arm extension, we discovered that a LAMMER kinase, which we call MADD-3, is required for the proper display of the EVA-1 receptor on the muscle's plasma membrane. Without MADD-3, EVA-1 levels decrease concomitantly with a reduction of the late-endosomal marker RAB-7. Through a genetic suppressor screen, we found that the levels of EVA-1 and RAB-7 can be restored in madd-3 mutants by eliminating the function of a p38 MAP kinase pathway. We also found that EVA-1 and RAB-7 will accumulate in madd-3 mutants upon disrupting CUP-5, which is a mucolipin ortholog required for proper lysosome function. Together, our data suggests that the MADD-3 LAMMER kinase antagonizes the p38-mediated endosomal trafficking of EVA-1 to the lysosome. In this way, MADD-3 ensures that sufficient levels of EVA-1 are present to guide muscle arm extension towards the source of the MADD-4 guidance cue.

A Novel Approach to Highly Damage Tolerant and Abrasion Resistant EVA Gloves, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — As part of the spacesuit pressure garment, the EVA glove incorporates a silicone pad on the palm for protection of the bladder from cuts and punctures. Repeated...

The odontological identification of Eva Braun Hitler.

Science.gov (United States)

Keiser-Nielsen, S; Strøm, F

1983-01-01

On May 7th-9th, 1945, a team of Russian pathologists autopsied several bodies found in and near the Fuehrer Bunker in Berlin; among them, a female body (No. 13) was later identified as that of Eva Braun Hitler (EBH), mainly by means of a gold bridge from the lower right jaw. A postmortem photograph of this bridge also shows a separate gold filling. Data now available on the dental treatment of EBH have permitted the present authors to substantiate that this gold filling also came from the mouth of EBH. Further speculation about the fate of EBH would henceforth seem professionally unfounded.

Ei sinistele esmaspäevadele!!! / Piret Jamnes, Marju Unt, Mare Teichmann, Eva Palu

Index Scriptorium Estoniae

2010-01-01

Personaliotsingufirma Fontes partner ja konsultant Piret Jamnes, Estonian Euromanagement Institute'i direktor Marju Unt, kommunikatsioonibüroo JLS PR-konsultant Eva Palu ja TTÜ psühholoogiaprofessor Mare Teichmann ideedest, mis aitavad tööst rohkem rõõmu tunda

Fogging Control on LDPE/EVA Coextruded Films: Wettability Behavior and Its Correlation with Electric Performance

Directory of Open Access Journals (Sweden)

Miguel A. Waldo-Mendoza

2017-02-01

Full Text Available The transformation of fog at a non-visible water layer on a membrane of low-density polyethylene (LDPE and ethylene-vinyl acetate (EVA was evaluated. Nonionic surfactants of major demand in the polyolefin industry were studied. A kinetic study using a hot fog chamber showed that condensation is controlled by both the diffusion and permanency of the surfactant more than by the change of the surface energy developed by the wetting agents. The greatest permanency of the anti-fog effect of the LDPE/EVA surface was close to 3000 h. The contact angle results demonstrated the ability of the wetting agent to spread out to the surface. Complementarily, the migration of nonionic surfactants from the inside of the polymeric matrix to the surface was analyzed by Fourier transform infrared (FTIR microscopy. Additionally, electrical measurement on the anti-fogging membrane at alternating currents and at a sweep frequency was proposed to test the conductivity and wetting ability of nonionic surfactants. We proved that the amphiphilic molecules had the ability to increase the conductivity in the polyolefin membrane. A correlation between the bulk electrical conductivity and the permanency of the fogging control on the LDPE/EVA coextruded film was found.

Linn kui maastik / Eva Castro ; intervjueerinud Katrin Koov ; toimetanud Carl-Dag Lige

Index Scriptorium Estoniae

Castro, Eva

2011-01-01

Intervjuus Tallinna arhitektuuribiennaali ühe peaesineja Eva Castroga, kes on AB Groundlab arhitekt ja juhib Londoni Arhitektuuriühingu arhitektuurikoolis maastikuurbanismi magistriprogrammi, maastikuurbanismist ja selle õppekavast, Groundlabi projektide ja Londoni Arhitektuuriühingu arhitektuurikooli tudengite tööde näitusest Eesti Arhitektuurimuuseumis, visioonivõistlusest "Street 2020"

Improved airline-type supplied-air plastic suit

International Nuclear Information System (INIS)

Jolley, L. Jr.; Zippler, D.B.; Cofer, C.H.; Harper, J.A.

1978-06-01

Two piece supplied-air plastic suits are used extensively at the Savannah River Plant for personnel protection against inhalation of airborne plutonium and tritium. Worker comfort and noise level problems gave impetus to development of an improved suit and aid distribution system. The resulting plastic suit and development work are discussed. The plastic suit unit cost is less than $20, the hearing zone noise level is less than 75 dBA, protection factors exceed 10,000, and user comfort is approved. This suit is expected to meet performance requirements for unrestricted use

Z-1 Prototype Space Suit Testing Summary

Science.gov (United States)

Ross, Amy

2013-01-01

The Advanced Space Suit team of the NASA-Johnson Space Center performed a series of test with the Z-1 prototype space suit in 2012. This paper discusses, at a summary level, the tests performed and results from those tests. The purpose of the tests were two-fold: 1) characterize the suit performance so that the data could be used in the downselection of components for the Z-2 Space Suit and 2) develop interfaces with the suitport and exploration vehicles through pressurized suit evaluations. Tests performed included isolated and functional range of motion data capture, Z-1 waist and hip testing, joint torque testing, CO2 washout testing, fit checks and subject familiarizations, an exploration vehicle aft deck and suitport controls interface evaluation, delta pressure suitport tests including pressurized suit don and doff, and gross mobility and suitport ingress and egress demonstrations in reduced gravity. Lessons learned specific to the Z-1 prototype and to suit testing techniques will be presented.

Hybrid Enhanced Epidermal SpaceSuit Design Approaches

Science.gov (United States)

Jessup, Joseph M.

A Space suit that does not rely on gas pressurization is a multi-faceted problem that requires major stability controls to be incorporated during design and construction. The concept of Hybrid Epidermal Enhancement space suit integrates evolved human anthropomorphic and physiological adaptations into its functionality, using commercially available bio-medical technologies to address shortcomings of conventional gas pressure suits, and the impracticalities of MCP suits. The prototype HEE Space Suit explored integumentary homeostasis, thermal control and mobility using advanced bio-medical materials technology and construction concepts. The goal was a space suit that functions as an enhanced, multi-functional bio-mimic of the human epidermal layer that works in attunement with the wearer rather than as a separate system. In addressing human physiological requirements for design and construction of the HEE suit, testing regimes were devised and integrated into the prototype which was then subject to a series of detailed tests using both anatomical reproduction methods and human subject.

The relationship between sol fraction and radiation dose in radiation crosslinking of low-density polyethylene (LDPE)/ethylenevinylacetate copolymer (EVA) blend

International Nuclear Information System (INIS)

Zhang, W.X.; Liu, Y.T.; Sun, J.Z.

1990-01-01

In this paper, two different methods were used to prepare the blend of low-density polyethylene (LDPE) and ethylene vinyl acetate copolymer (EVA). One of them was mechanical blending, and the other was solution blending. The relationship between sol fraction and radiation dose of different weight ratio polymer blends has been studied. The method to calculate the β b value of polymer blend system (LDPE/EVA) has been established. (author)

Thermodynamical analysis of an ADAM/EVA-process for electricity generation

International Nuclear Information System (INIS)

Knoche, K.F.; Tsatsaronis, G.; Loehrer, F.

1982-01-01

In this article, the so-called ADAM/EVA-process for long-range heat transport is presented as an alternative method of electricity generation, as being interesting from the purely thermodynamic point of view. For various variants of this process, extensive mass and energy balances are calculated. With the help of exact energy balances, the irreversibilities of the individual parts of the plant are determined and evaluated by comparison. (orig.) [de

Apollo 16 lunar module 'Orion' photographed from distance during EVA

Science.gov (United States)

1972-01-01

The Apollo 16 Lunar Module 'Orion' is photographed from a distance by Astronaut Chares M. Duke Jr., lunar module pilot, aboard the moving Lunar Roving Vehicle. Astronauts Duke and John W. Young, commander, were returing from the third Apollo 16 extravehicular activity (EVA-2). The RCA color television camera mounted on the LRV is in the foreground. A portion of the LRV's high-gain antenna is at top left.

Effect of the High-Energy Electron Beam Irradiation on the Morphology and Mechanical Properties of PE/EVA Blends

International Nuclear Information System (INIS)

Razavi Aghjeh, M. K.

2006-01-01

The main objective of the present work was to study the effect of electron beam irradiation on the morphology and mechanical properties of PE/EVA blends. The melt compounding of the blends were carried out in an internal mixer. The small amount of the prepared blend samples were rapidly quenched in liquid nitrogen and the remained were compression molded into sheets. Sheets and quenched samples were then irradiated by a 10 MeV electron beam accelerator using different dose levels. The morphological studies for both, sheeted and quenched blends were performed on cryogenically fractured surfaces by using SEM technique. The mechanical properties of the sheeted samples were evaluated according to ASTM D638. The results of mechanical properties showed that, increasing in irradiation dose increases the tensile strength and decreases the elongation at break in all blend compositions. On the other hand, it was found that, for PE/EVA blends the extent of tensile strength increase, and elongation at break decrease, are more appreciable in compare to the neat PE and EVA. These results suggest that, the blend interface is more susceptible for irradiation induced crosslinking. This is because of more affinity of PE and EVA macroradicals to termination with together in compare to own macroradicals.The results of morphological studies showed that, irradiation can stabilize the blend morphology especially in co-continues regions, where the morphology is more unstable due to the heat coarsening

Functional assessment of allelic variants in the SLC26A4 gene involved in Pendred syndrome and nonsyndromic EVA

Science.gov (United States)

Pera, Alejandra; Dossena, Silvia; Rodighiero, Simona; Gandía, Marta; Bottà, Guido; Meyer, Giuliano; Moreno, Felipe; Nofziger, Charity; Hernández-Chico, Concepción; Paulmichl, Markus

2008-01-01

Pendred syndrome is an autosomal recessive disorder characterized by sensorineural hearing loss, with malformations of the inner ear, ranging from enlarged vestibular aqueduct (EVA) to Mondini malformation, and deficient iodide organification in the thyroid gland. Nonsyndromic EVA (ns-EVA) is a separate type of sensorineural hearing loss showing normal thyroid function. Both Pendred syndrome and ns-EVA seem to be linked to the malfunction of pendrin (SLC26A4), a membrane transporter able to exchange anions between the cytosol and extracellular fluid. In the past, the pathogenicity of SLC26A4 missense mutations were assumed if the mutations fulfilled two criteria: low incidence of the mutation in the control population and substitution of evolutionary conserved amino acids. Here we show that these criteria are insufficient to make meaningful predictions about the effect of these SLC26A4 variants on the pendrin-induced ion transport. Furthermore, we functionally characterized 10 missense mutations within the SLC26A4 ORF, and consistently found that on the protein level, an addition or omission of a proline or a charged amino acid in the SLC26A4 sequence is detrimental to its function. These types of changes may be adequate for predicting SLC26A4 functionality in the absence of direct functional tests. PMID:19017801

Influence of the association of the EVA and NBR on the characteristics of modified bitumen

Science.gov (United States)

Bensaada, A.; Soudani, K.; Haddadi, S.; Saoula, S.

2015-03-01

Durability and the performance of pavement depend mainly on the characteristics of materials which change over time like all other organic substances. They are subject to significant changes due to environmental conditions during the different phases of use. In the present work we investigated experimentally the influence of the association of ethyl vinyl acetate polymer (EVA) with an industrial waste, acrylonitrile-butadiene rubber (NBR) on the modification of bitumen AC 35-50 and its rheological behavior. The incorporation of NBR and EVA in the bitumen improved its intrinsic characteristics (softening point, penetration and ductility). In addition to improving the characteristics of bituminous binders that will affect the durability of bituminous structures, the environment will be preserved by the recycling of industrial waste.

Modified atmosphere efficiency in the quality maintenance of Eva apples

Directory of Open Access Journals (Sweden)

Camila Argenta Fante

2014-06-01

Full Text Available Modified atmosphere is a method of food preservation that provides increased lifetime, decreases deterioration losses, and facilitates marketing. The objective of this study was to evaluate the efficiency of different plastic films in modifying the atmosphere around Eva apples to assure quality maintenance during postharvest storage. The fruits were cleaned and separated into three treatment groups: polypropylene, low density polyethylene, and high density polyethylene packing with a total of 5 fruits per package for each evaluation period. A group of control apples was not submitted to atmospheric modification. After the treatment, all fruits were stored at 0.5±0.5°C (cold storage for up to 225 days. The analyses were performed at 45, 135, and 225 days after cold storage. Respiration, ethylene production, firmness, mass loss, total pectin, soluble pectin, soluble solids, total acidity, and epidermis background color of each treatment group were evaluated. The high density polyethylene film treatment did not show a decrease in ethylene production during storage and allowed the fruits to maintain a greater firmness and smaller percentage of mass loss during the study period. Moreover, the storage of the Eva apple cultivar under modified atmosphere allowed the preservation of quality for up to seven months.

Mari sangari päeva sõnum / Jaak Prozes ; interv. Livia Viitol

Index Scriptorium Estoniae

Prozes, Jaak, 1965-

2006-01-01

Fenno-Ugria Hõimukeskuse juhataja ja Eestimaa Rahvaste Ühenduse juht soome-ugri rahvaste olukorrast Venemaal ja rahvusseltside tegevusest Eestis. Aprilli lõpul tähistasid marid oma rahvuspüha - mari sangari päeva. Pärimuse põhjal langes maride rahvuskangelane Boltu̧ võitluses oma rahva vabaduse eest 26. aprillil 1556

A Cabin Air Separator for EVA Oxygen

Science.gov (United States)

Graf, John C.

2011-01-01

Presently, the Extra-Vehicular Activities (EVAs) conducted from the Quest Joint Airlock on the International Space Station use high pressure, high purity oxygen that is delivered to the Space Station by the Space Shuttle. When the Space Shuttle retires, a new method of delivering high pressure, high purity oxygen to the High Pressure Gas Tanks (HPGTs) is needed. One method is to use a cabin air separator to sweep oxygen from the cabin air, generate a low pressure/high purity oxygen stream, and compress the oxygen with a multistage mechanical compressor. A main advantage to this type of system is that the existing low pressure oxygen supply infrastructure can be used as the source of cabin oxygen. ISS has two water electrolysis systems that deliver low pressure oxygen to the cabin, as well as chlorate candles and compressed gas tanks on cargo vehicles. Each of these systems can feed low pressure oxygen into the cabin, and any low pressure oxygen source can be used as an on-board source of oxygen. Three different oxygen separator systems were evaluated, and a two stage Pressure Swing Adsorption system was selected for reasons of technical maturity. Two different compressor designs were subjected to long term testing, and the compressor with better life performance and more favorable oxygen safety characteristics was selected. These technologies have been used as the basis of a design for a flight system located in Equipment Lock, and taken to Preliminary Design Review level of maturity. This paper describes the Cabin Air Separator for EVA Oxygen (CASEO) concept, describes the separator and compressor technology trades, highlights key technology risks, and describes the flight hardware concept as presented at Preliminary Design Review (PDR)

Benefits of a Single-Person Spacecraft for Weightless Operations. [(Stop Walking and Start Flying)

Science.gov (United States)

Griffin, Brand N.

2012-01-01

Historically, less than 20 percent of crew time related to extravehicular activity (EVA) is spent on productive external work.1 A single-person spacecraft with 90 percent efficiency provides productive new capabilities for maintaining the International Space Station (ISS), exploring asteroids, and servicing telescopes or satellites. With suits, going outside to inspect, service or repair a spacecraft is time-consuming, requiring pre-breathe time, donning a fitted space suit, and pumping down an airlock. For ISS, this is between 12.5 and 16 hours for each EVA, not including translation and work-site set up. The work is physically demanding requiring a day of rest between EVAs and often results in suit-induced trauma with frequent injury to astronauts fingers2. For maximum mobility, suits use a low pressure, pure oxygen atmosphere. This represents a fire hazard and requires pre-breathing to reduce the risk of decompression sickness (bends). With virtually no gravity, humans exploring asteroids cannot use legs for walking. The Manned Maneuvering Unit offers a propulsive alternative however it is no longer in NASA s flight inventory. FlexCraft is a single person spacecraft operating at the same cabin atmosphere as its host so there is no risk of the bends and no pre-breathing. This allows rapid, any-time access to space for repeated short or long EVAs by different astronauts. Integrated propulsion eliminates hand-over-hand translation or having another crew member operate the robotic arm. The one-size-fits-all FlexCraft interior eliminates the suit part inventory and crew time required to fit all astronauts. With a shirtsleeve cockpit, conventional displays and controls are used and because the work is not strenuous no rest days are required. Furthermore, there is no need for hand tools because manipulators are equipped with force multiplying end-effectors that can deliver the precise torque for the job.

The BRITNeY Suite Animation Tool

DEFF Research Database (Denmark)

Westergaard, Michael; Lassen, Kristian Bisgaard

2006-01-01

This paper describes the BRITNeY suite, a tool which enables users to create visualizations of formal models. BRITNeY suite is integrated with CPN Tools, and we give an example of how to extend a simple stop-and-wait protocol with a visualization in the form of message sequence charts. We also sh...... examples of animations created during industrial projects to give an impression of what is possible with the BRITNeY suite....

Muusajüngrid pühitsesid Kreutzwaldi 200. sünnipäeva / Toomas Pill

Index Scriptorium Estoniae

Pill, Toomas

2004-01-01

13. dets. 2003 Sydneys toimunud tähtpäevaüritusel esines Toomas Pill referaadiga "Kalevipoja" retseptsioonist, loeti ette katkendeid Kreutzwaldi ja Koidula kirjavahetusest ning deklameeriti Heidi Aedma poolt valitud katkendeid "Kalevipojast"

Kunagi nii popp idabloki kadunud filmikunst / Eva Näripea, Andreas Trossek ; intervjueerinud Ave Randviir

Index Scriptorium Estoniae

Näripea, Eva

2009-01-01

2007. a. oktoobris toimunud konverentsi "Via Transversa : Lost Cinema of the Former Eastern Bloc" ettekannetel põhinevast kogumikust: Via Transversa : Lost Cinema of the Former Eastern Bloc / editors Eva Näripea, Andreas Trossek. Tallinn : Eesti Kunstiakadeemia, 2008. (Koht ja paik ; 7)

Enabling interoperability in Geoscience with GI-suite

Science.gov (United States)

Boldrini, Enrico; Papeschi, Fabrizio; Santoro, Mattia; Nativi, Stefano

2015-04-01

GI-suite is a brokering framework targeting interoperability of heterogeneous systems in the Geoscience domain. The framework is composed by different brokers each one focusing on a specific functionality: discovery, access and semantics (i.e. GI-cat, GI-axe, GI-sem). The brokering takes place between a set of heterogeneous publishing services and a set of heterogeneous consumer applications: the brokering target is represented by resources (e.g. coverages, features, or metadata information) required to seamlessly flow from the providers to the consumers. Different international and community standards are now supported by GI-suite, making possible the successful deployment of GI-suite in many international projects and initiatives (such as GEOSS, NSF BCube and several EU funded projects). As for the publisher side more than 40 standards and implementations are supported (e.g. Dublin Core, OAI-PMH, OGC W*S, Geonetwork, THREDDS Data Server, Hyrax Server, etc.). The support for each individual standard is provided by means of specific GI-suite components, called accessors. As for the consumer applications side more than 15 standards and implementations are supported (e.g. ESRI ArcGIS, Openlayers, OGC W*S, OAI-PMH clients, etc.). The support for each individual standard is provided by means of specific profiler components. The GI-suite can be used in different scenarios by different actors: - A data provider having a pre-existent data repository can deploy and configure GI-suite to broker it and making thus available its data resources through different protocols to many different users (e.g. for data discovery and/or data access) - A data consumer can use GI-suite to discover and/or access resources from a variety of publishing services that are already publishing data according to well-known standards. - A community can deploy and configure GI-suite to build a community (or project-specific) broker: GI-suite can broker a set of community related repositories and

25. juulil toimuvad kodukoha suurmehe Jakob Hurda 170. sünniaastapäeva pidustused

Index Scriptorium Estoniae

Vill, Sirje

2009-01-01

Jakob Hurda 170. sünniaastapäeva tähistatakse traditsioonilise kultuuriretkega Jakob Hurdaga seotud paikadesse, autasustatakse õpilaste uurimustööde võitjaid ja teemaüritusel "Jakob Hurt 170" Põlva Kultuuri- ja Huvikeskuses antakse üle laureaatidele Hurda-nimelised kultuuriauhinnad

The Use of Human Modeling of EVA Tasks as a Systems Engineering Tool

Science.gov (United States)

Dischinger, H. Charles, Jr.; Schmidt, Henry J.; Kross, Dennis A. (Technical Monitor)

2001-01-01

Computer-generated human models have been used in aerospace design for a decade. They have come to be highly reliable for worksite analysis of certain types of EVA tasks. In many design environments, this analysis comes after the structural design is largely complete. However, the use of these models as a development tool is gaining acceptance within organizations that practice good systems engineering processes. The design of the United States Propulsion Module for the International Space Station provides an example of this application. The Propulsion Module will provide augmentation to the propulsion capability supplied by the Russian Service Module Zvezda. It is a late addition to the set of modules provided by the United States to the ISS Program, and as a result, faces design challenges that result from the level of immaturity of its integration into the Station. Among these are heat dissipation and physical envelopes. Since the rest of the Station was designed to maximize the use of the cooling system, little margin is available for the addition of another module. The Propulsion Module will attach at the forward end of the Station, and will be between the Orbiter and the rest of ISS. Since cargo must be removed from the Payload Bay and transferred to Station by the Canadarm, there is a potential for protrusions from the module, such as thruster booms, to interfere with robotic operations. These and similar engineering issues must be addressed as part of the development. In the implementation of good system design, all design solutions should be analyzed for compatibility with all affected subsystems. Human modeling has been used in this project to provide rapid input to system trades of design concepts. For example, the placement of radiators and avionics components for optimization of heat dissipation had to be examined for feasibility of EVA translation paths and worksite development. Likewise, the location of and mechanism for the retraction of thruster

Eva Giberti: trayectoria institucional, científica y cívica

OpenAIRE

Giberti, Eva; Escardó, Vita; Invernizzi, Hernán; Maffia, Diana; Maldavsky, David

2006-01-01

Abstract: In spite of the diversity of perspectives approached by the authors, this text –which presents the institutional, scientific, and civic trajectory of Eva Giberti– highlights her landmarks and facets: her academic activity, her trajectory integrating different responsibilities, her clinical labor, her civic participation, her contributions in the mass media (where she was the pioneer in the spreading of psychoanalysis), and her publications (among them, the ones about the demystific...

The Baltic States and Moscow's 9 May Commemoration : Analysing Memory Politics in Europe / Eva-Clarita Onken

Index Scriptorium Estoniae

Onken, Eva-Clarita

2007-01-01

Mälu roll kaasaegse Euroopa poliitikas, selle mõju riikidevahelistele kahepoolsetele suhetele ja Euroopa Liidu poliitikale seoses 2005. aasta 9. mail Moskvas toimunud Teise maailmasõja 60. aastapäeva pidustustega

Community Arctio-Artemisetum vulgaris (Tx. 1942 Oberd. et al. 1967.: the Most Widespread Ruderal Community at Pančevački rit

Directory of Open Access Journals (Sweden)

Radmila Stanković-Kalezić

2009-01-01

Full Text Available A several-year investigation of distribution, phytocoenological differentiation, floristic composition and structure of the ruderal flora and vegetation, and relative anthropogenic influences was conducted in the area of Pančevački rit.The study focused on the ruderal community Arctio-Artemisetum vulgaris, the most widespread of 10 ruderal communities identified in a detailed phytocoenological analysis of the location of Pančevački rit.

ASDA - Advanced Suit Design Analyzer computer program

Science.gov (United States)

Bue, Grant C.; Conger, Bruce C.; Iovine, John V.; Chang, Chi-Min

1992-01-01

An ASDA model developed to evaluate the heat and mass transfer characteristics of advanced pressurized suit design concepts for low pressure or vacuum planetary applications is presented. The model is based on a generalized 3-layer suit that uses the Systems Integrated Numerical Differencing Analyzer '85 in conjunction with a 41-node FORTRAN routine. The latter simulates the transient heat transfer and respiratory processes of a human body in a suited environment. The user options for the suit encompass a liquid cooled garment, a removable jacket, a CO2/H2O permeable layer, and a phase change layer.

Hiina tänapäeva arhitektuur - karmiilmeline, aga põnev / Zhang Ke, Zhang Hong, Xiaodu Liu ; interv. Hanna Läkk ja Ene Läkk

Index Scriptorium Estoniae

Zhang Ke

2006-01-01

Intervjuu Hiina arhitektuuribüroo Standardarchitecture arhitektide Zhang Ke ja Zhang Hongiga ning arhitektuuribüroo Urbanus arhitekti Xiaodu Liuga Hollandis Hiina tänapäeva tutvustaval näitusel. Hiina arhitektide haridusest, oma arhitektuuribüroode töödest, tänapäeva hiina arhitektuurist, põhiprobleemidest

Morphing: A Novel Approach to Astronaut Suit Sizing

Science.gov (United States)

Margerum, Sarah; Clowers, Kurt; Rajulu, Sudhakar

2006-01-01

The fitting of a spacesuit to an astronaut is an iterative process consisting of two parts. The first uses anthropometric data to provide an approximation of the suit components that will fit the astronaut. The second part is the subjective fitting, where small adjustments are made based on the astronaut s preference. By providing a better approximation of the correct suit components, the entire fit process time can be reduced significantly. The goals of this project are twofold: (1) To evaluate the effectiveness of the existing sizing algorithm for the Mark III Hybrid suit and (2) to determine what additional components are needed in order to provide adequate sizing for the existing astronaut population. A single subject was scanned using a 3D whole-body scanner (VITUS 3D) in the Mark III suit in eight different poses and four subjects in minimal clothing were also scanned in similar poses. The 3D external body scans of the suit and the subject are overlaid and visually aligned in a customized MATLAB program. The suit components were contracted or expanded linearly along the subjects limbs to match the subjects segmental lengths. Two independent measures were obtained from the morphing program on four subjects and compared with the existing sizing information. Two of the four subjects were in correspondence with the sizing algorithm and morphing results. The morphing outcome for a third subject, incompatible with the suit, suggested that an additional arm element at least 6 inches smaller than the existing smallest suit component would need to be acquired. The morphing result of the fourth subject, deemed incompatible with the suit using the sizing algorithm, indicated a different suit configuration which would be compatible. This configuration matched with the existing suit fit check data.

Nende kõrgeaususte kirjad on avaldatud : [intervjuu] / Eva Aaver, Heli Laanekask ; üles kirjut. Juhani Püttsepp

Index Scriptorium Estoniae

Aaver, Eva, 1925-2008

1998-01-01

Riigi teaduspreemia humanitaarteaduste vallas said Eva Aaver, Heli Laanekask, Abel Nagelmaa ja Leo Anvelt (postuumselt) publikatsiooni 'Otto Wilhelm Masingu kirjad Johann Heinrich Rosenplänterile. 1814-1832'

Shift of Enterovirus species among children in Cameroon--identification of a new enterovirus, EV-A119.

Science.gov (United States)

Ayukekbong, James; Kabayiza, Jean-Claude; Lindh, Magnus; Nkuo-Akenji, Theresia; Tah, Ferdinand; Bergström, Tomas; Norder, Helene

2013-09-01

Infections caused by human enteroviruses (EVs) are often asymptomatic or mild, although they may cause more severe illnesses as meningitis and acute flaccid paralysis. EVs have globally posed a threat to children, and outbreaks of aseptic meningitis and hand, foot and mouth disease are frequently reported. To identify EV strains circulating among healthy children in a small community in Limbe, Cameroon two years apart. Species and EV types were obtained by partial 5'UTR-VP4 and VP1 sequencing of RNA from stool samples collected in October 2009 and September 2011 from 150 children in Cameroon. In all, 74 children (49%) were infected with 28 different types of EV. There were 29 (54%) infected children in 2009, and 45 (47%) in 2011. There was a significant difference between detected species of EV, with 15 (47%) children infected with EV-A in 2009, and 22 (71%) with EV-B in 2011 (p=0.0001). In 2009, one child was infected by a divergent EV, which was most similar to EV-A90. Based on the complete VP1 sequence, it was shown to be a new EV designated EV-A119. The current study shows a high heterogeneity of circulating EV types among children in Limbe, Cameroon, and a previously not described shift in predominating EV species. Copyright © 2013 Elsevier B.V. All rights reserved.

Effect of fibre treatments on tensile properties of ethylene vinyl acetate/natural rubber/mengkuang leaf fibre (EVA/NR/MLF) thermoplastic elastomer composites

Science.gov (United States)

Hashim, Faiezah; Ismail, Hanafi; Rusli, Arjulizan

2017-07-01

Nowadays, a great attention has been dedicated to natural fibers as reinforcement for polymer composites. Natural fibers, compared to glass fibers, exhibit better mechanical properties, such as stiffness, impact strength, flexibility and modulus. However, certain drawbacks, such as the incompatibility between fibers and polymer matrices, the tendency to form aggregates during processing and the poor resistance to moisture, reduce the use of these natural fibers as reinforcements in polymers. Several treatments and modifications are being used to improve the adhesion between fibre and matrix. In this work, the effect of bleaching treatments using hydrogen peroxide in the Mengkuang leaf fibre (MLF) was evaluated on tensile properties of Ethylene Vinyl Acetate (EVA)/Natural Rubber (NR)/MLF composites. Treated MLF were mixed with the EVA/NR blend in Haake internal mixer at 120 °C and rotor speed of 50 rpm for 10 minutes. Fibre morphology and the fibre/matrix interface ware further characterized by scanning electron microscopy (SEM). The tensile strength was increased by about 8% as compared to the composites with untreated fibers. The increased adhesion between fiber and matrix was also observed by SEM. Thus, EVA/NR/MLF composites reinforced with the treated fibres exhibited better tensile properties than untreated EVA/NR/MLF composites.

Analytical Tools for Space Suit Design

Science.gov (United States)

Aitchison, Lindsay

2011-01-01

As indicated by the implementation of multiple small project teams within the agency, NASA is adopting a lean approach to hardware development that emphasizes quick product realization and rapid response to shifting program and agency goals. Over the past two decades, space suit design has been evolutionary in approach with emphasis on building prototypes then testing with the largest practical range of subjects possible. The results of these efforts show continuous improvement but make scaled design and performance predictions almost impossible with limited budgets and little time. Thus, in an effort to start changing the way NASA approaches space suit design and analysis, the Advanced Space Suit group has initiated the development of an integrated design and analysis tool. It is a multi-year-if not decadal-development effort that, when fully implemented, is envisioned to generate analysis of any given space suit architecture or, conversely, predictions of ideal space suit architectures given specific mission parameters. The master tool will exchange information to and from a set of five sub-tool groups in order to generate the desired output. The basic functions of each sub-tool group, the initial relationships between the sub-tools, and a comparison to state of the art software and tools are discussed.

Kuidas tähistame TÜ 375. aastapäeva? / Varje Sootak

Index Scriptorium Estoniae

Sootak, Varje, 1946-

2007-01-01

TÜ 375. aastapäeva tähistamise ürituste seas ka kontserdid: 5. okt. Vanemuise kontserdimajas "Kuningas Gustavi gala" (esinevad ülikoori esinduskoorid koos Vanemuise Sümfooniaorkestriga ja Viljandi Kultuuriakadeemia kultuurikollektiivid, sh. muusikud), 6. okt. AthenasTRÜ ansamblid Rajacas, Rentaablus, Meedium ja Fix, 3. sept. Raekoja platsil uue kooliaasta alguse kontsert, 5. okt. üliõpilasmajas heategevuskontsert, sept. lõpus esitavad ülikoolide koorid Tallinnas ja Pärnus Carl Orffi lavakantaadi "Carmina BUrana"

Interoperative efficiency in minimally invasive surgery suites.

Science.gov (United States)

van Det, M J; Meijerink, W J H J; Hoff, C; Pierie, J P E N

2009-10-01

Performing minimally invasive surgery (MIS) in a conventional operating room (OR) requires additional specialized equipment otherwise stored outside the OR. Before the procedure, the OR team must collect, prepare, and connect the equipment, then take it away afterward. These extra tasks pose a thread to OR efficiency and may lengthen turnover times. The dedicated MIS suite has permanently installed laparoscopic equipment that is operational on demand. This study presents two experiments that quantify the superior efficiency of the MIS suite in the interoperative period. Preoperative setup and postoperative breakdown times in the conventional OR and the MIS suite in an experimental setting and in daily practice were analyzed. In the experimental setting, randomly chosen OR teams simulated the setup and breakdown for a standard laparoscopic cholecystectomy (LC) and a complex laparoscopic sigmoid resection (LS). In the clinical setting, the interoperative period for 66 LCs randomly assigned to the conventional OR or the MIS suite were analyzed. In the experimental setting, the setup and breakdown times were significantly shorter in the MIS suite. The difference between the two types of OR increased for the complex procedure: 2:41 min for the LC (p < 0.001) and 10:47 min for the LS (p < 0.001). In the clinical setting, the setup and breakdown times as a whole were not reduced in the MIS suite. Laparoscopic setup and breakdown times were significantly shorter in the MIS suite (mean difference, 5:39 min; p < 0.001). Efficiency during the interoperative period is significantly improved in the MIS suite. The OR nurses' tasks are relieved, which may reduce mental and physical workload and improve job satisfaction and patient safety. Due to simultaneous tasks of other disciplines, an overall turnover time reduction could not be achieved.

The Variable Vector Countermeasure Suit (V2Suit for Space Habitation and Exploration

Directory of Open Access Journals (Sweden)

Kevin R Duda

2015-04-01

Full Text Available The Variable Vector Countermeasure Suit (V2Suit for Space Habitation and Exploration is a novel system concept that provides a platform for integrating sensors and actuators with daily astronaut intravehicular activities to improve health and performance, while reducing the mass and volume of the physiologic adaptation countermeasure systems, as well as the required exercise time during long-duration space exploration missions. The V2Suit system leverages wearable kinematic monitoring technology and uses inertial measurement units (IMUs and control moment gyroscopes (CMGs within miniaturized modules placed on body segments to provide a viscous resistance during movements against a specified direction of down – initially as a countermeasure to the sensorimotor adaptation performance decrements that manifest themselves while living and working in microgravity and during gravitational transitions during long-duration spaceflight, including post-flight recovery and rehabilitation. Several aspects of the V2Suit system concept were explored and simulated prior to developing a brassboard prototype for technology demonstration. This included a system architecture for identifying the key components and their interconnects, initial identification of key human-system integration challenges, development of a simulation architecture for CMG selection and parameter sizing, and the detailed mechanical design and fabrication of a module. The brassboard prototype demonstrates closed-loop control from down initialization through CMG actuation, and provides a research platform for human performance evaluations to mitigate sensorimotor adaptation, as well as a tool for determining the performance requirements when used as a musculoskeletal deconditioning countermeasure. This type of countermeasure system also has Earth benefits, particularly in gait or movement stabilization and rehabilitation.

Innovative technology summary report: Sealed-seam sack suits

International Nuclear Information System (INIS)

1998-09-01

Sealed-seam sack suits are an improved/innovative safety and industrial hygiene technology designed to protect workers from dermal exposure to contamination. Most of these disposable, synthetic-fabric suits are more protective than cotton suits, and are also water-resistant and gas permeable. Some fabrics provide a filter to aerosols, which is important to protection against contamination, while allowing air to pass, increasing comfort level of workers. It is easier to detect body-moisture breakthrough with the disposable suits than with cotton, which is also important to protecting workers from contamination. These suits present a safe and cost-effective (6% to 17% less expensive than the baseline) alternative to traditional protective clothing. This report covers the period from October 1996 to August 1997. During that time, sealed-seam sack suits were demonstrated during daily activities under normal working conditions at the C Reactor and under environmentally controlled conditions at the Los Alamos National Laboratory (LANL)

The ZPIC educational code suite

Science.gov (United States)

Calado, R.; Pardal, M.; Ninhos, P.; Helm, A.; Mori, W. B.; Decyk, V. K.; Vieira, J.; Silva, L. O.; Fonseca, R. A.

2017-10-01

Particle-in-Cell (PIC) codes are used in almost all areas of plasma physics, such as fusion energy research, plasma accelerators, space physics, ion propulsion, and plasma processing, and many other areas. In this work, we present the ZPIC educational code suite, a new initiative to foster training in plasma physics using computer simulations. Leveraging on our expertise and experience from the development and use of the OSIRIS PIC code, we have developed a suite of 1D/2D fully relativistic electromagnetic PIC codes, as well as 1D electrostatic. These codes are self-contained and require only a standard laptop/desktop computer with a C compiler to be run. The output files are written in a new file format called ZDF that can be easily read using the supplied routines in a number of languages, such as Python, and IDL. The code suite also includes a number of example problems that can be used to illustrate several textbook and advanced plasma mechanisms, including instructions for parameter space exploration. We also invite contributions to this repository of test problems that will be made freely available to the community provided the input files comply with the format defined by the ZPIC team. The code suite is freely available and hosted on GitHub at https://github.com/zambzamb/zpic. Work partially supported by PICKSC.

Preparation and characterizations of HDPE-EVA alloy/OMT nanocomposites/paraffin compounds as a shape stabilized phase change thermal energy storage material

International Nuclear Information System (INIS)

Cai Yibing; Hu Yuan; Song Lei; Lu Hongdian; Chen Zuyao; Fan Weicheng

2006-01-01

A kind of shape stabilized phase change nanocomposites materials (PCNM) based on high density polyethylene (HDPE)/ethylene-vinyl acetate (EVA) alloy, organophilic montmorillonite (OMT), paraffin and intumescent flame retardant (IFR) are prepared using twin-screw extruder technique. The structures of the HDPE-EVA alloy/OMT nanocomposites are evidenced by the X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results show that an ordered intercalated nanomorphology of the HDPE-EVA alloy/OMT nanocomposites is formed. Then the structures of the shape stabilized PCNM are characterized by scanning electron microscopy (SEM). The HDPE-EVA alloy/OMT nanocomposites act as the supporting material and form the three-dimensional network structure. The paraffin acts as a phase change material and disperses in the three-dimensional network structure. Its latent heat is given by differential scanning calorimeter (DSC) method. The SEM and DSC results show that the additives of IFR have little effect on the network structure and the latent heat of shape stabilized PCNM, respectively. The thermal stability properties are characterized by thermogravimetric analysis (TGA). The TGA analysis results indicate that the flame retardant shape stabilized PCNM produce a larger amount of char residue at 800 deg. C than that of shape stabilized PCNM, although the onset of weight loss of the flame retardant shape stabilized PCNM occur at a lower temperature. The formed multicellular char residue contributes to the improvement of thermal stability performance. The probable combustion mechanisms are also discussed in this paper

[Antigravity suit used for neurosurgical operations in sitting position].

Science.gov (United States)

Szpiro-Zurkowska, A; Milczarek, Z; Marchel, A; Jagielski, J

1996-01-01

The aviator's antigravity suit (G-suit) was used for 40 operations on neurosurgical patients operated on in sitting position. The G-suit was filled with air to 0.2 atmosphere (20 kPa) pressure in 26 cases, and 0.3 atm. (30 kPa) in 14 cases. In all cases G-suit filling was followed by central venous pressure rise and mean arterial pressure rise. Venous air embolism was found in 5 (12.5%) patients. No other complications connected with the use of G-suit were observed.

Clay intercalation and influence on crystallinity of EVA-based clay nanocomposites

International Nuclear Information System (INIS)

Chaudhary, D.S.; Prasad, R.; Gupta, R.K.; Bhattacharya, S.N.

2005-01-01

Various polymer clay nanocomposites (PCNs) were prepared from ethylene vinyl acetate copolymer (EVA) with 9, 18 and 28% vinyl acetate (VA) content filled with different wt.% (2.5, 5 and 7.5) of a Montmorillonite-based organo-modified clay (Cloisite[reg] C15A and C30B). The PCNs were prepared using melt blending techniques. Morphological information regarding intercalation and exfoliation were determined by using wide-angle X-ray scattering (WAXS) and transmission electron microscopy (TEM). WAXS and TEM confirmed that increasing the VA content was necessary to achieve greater clay-polymer interaction as seen from the comparatively higher intercalation of clay platelets with 28% VA. The effect of addition of clay on the development and the modification of crystalline morphology in EVA matrix was also studied using WAXS and temperature-modulated differential scanning calorimetry (MDSC). Results are presented showing that the addition of clay platelets does not increase the matrix crystallinity but the morphology was significantly modified such that there was an increase in the 'rigid' amorphous phase. Mechanical properties were also evaluated against the respective morphological information for each specimen and there are indications that the level of clay-polymer interaction plays a significant role in such morphological modification, and in such a way that affects the final PCN mechanical properties which has wide and significant applications in the packaging industries

View of the Lunar Module 'Orion' and Lunar Roving Vehicle during first EVA

Science.gov (United States)

1972-01-01

A view of the Lunar Module (LM) 'Orion' and Lunar Roving Vehicle (LRV), as photographed by Astronaut Charles M. Duke Jr., lunar module pilot, during the first Apollo 16 extravehicular activity (EVA-1) at the Descates landing site. Astronaut John W. Young, commander, can be seen directly behind the LRV. The lunar surface feature in the left background is Stone Mountain.

Oracle SOA Suite 11g performance cookbook

CERN Document Server

Brasier, Matthew; Wright, Nicholas

2013-01-01

This is a Cookbook with interesting, hands-on recipes, giving detailed descriptions and lots of practical walkthroughs for boosting the performance of your Oracle SOA Suite.This book is for Oracle SOA Suite 11g administrators, developers, and architects who want to understand how they can maximise the performance of their SOA Suite infrastructure. The recipes contain easy to follow step-by-step instructions and include many helpful and practical tips. It is suitable for anyone with basic operating system and application server administration experience.

Pühapäeva hommik : [luuletused] / Wallace Stevens ; tõlk. Hasso Krull, Märt Väljataga

Index Scriptorium Estoniae

Stevens, Wallace

2008-01-01

Sisu: Pühapäeva hommik ; Peter Quince klahvide ees ; Mozart, 1935 ; Postkaart vulkaanist ; Moodsast luulest ; Paks punane mees loeb ette ; Seesmise armukese viimane üksikõne ; Ühe üksikasja kulg. Elu- ja loomeloolisi andmeid autori kohta lk. 531-532

Safety in the use of pressurized suits

International Nuclear Information System (INIS)

1984-01-01

This Code of Practice describes the procedures relating to the safe operation of Pressurized Suit Areas and their supporting services. It is directed at personnel responsible for the design and/or operation of Pressurized Suit Areas. (author)

Pidupäevaüritused olid Eestile ilus kingitus / Andris Tammela, Eno-Gerrit Link

Index Scriptorium Estoniae

Tammela, Andris

2008-01-01

Ülevaade EV 90. aastapäeva juubeliüritusest Pärnus. Vt. samas: Vabariigi juubel värvis Pärnu sinimustvalgeks; Head emotsioonid Eesti aastapäevalt: Are vallavanem Jaanus Männik, Euroopa Parlamendi liige Marianne Mikko, Pärnu linnavolikogu liikmed Valter Parve ja Raul Sarandi ja Pärnu maavanem Toomas Kivimägi

Eesti Draamateater tähistas maja 100. sünnipäeva / Tiiu Laks

Index Scriptorium Estoniae

Laks, Tiiu, 1984-

2010-01-01

18. septembril tähistati avatud uste päevaga Eesti Draamateater hoone 100. sünnipäeva. Õhtul sai teatrihoone fassaadilt vaadata Taavet Janseni, Taavi Varmi ja Andres Tenusaare videoinstallatsiooni. Esitleti raamatut "Eesti Draamateatri maja 100" (autorid Karin Hallas-Murula, Kristel Pappel, Haldja Jalajas). Avati Peeter Lauritsa fotonäitus "Pahempidi"

Suites of dwarfs around Nearby giant galaxies

International Nuclear Information System (INIS)

Karachentsev, Igor D.; Kaisina, Elena I.; Makarov, Dmitry I.

2014-01-01

The Updated Nearby Galaxy Catalog (UNGC) contains the most comprehensive summary of distances, radial velocities, and luminosities for 800 galaxies located within 11 Mpc from us. The high density of observables in the UNGC makes this sample indispensable for checking results of N-body simulations of cosmic structures on a ∼1 Mpc scale. The environment of each galaxy in the UNGC was characterized by a tidal index Θ 1 , depending on the separation and mass of the galaxy's main disturber (MD). We grouped UNGC galaxies with a common MD in suites, and ranked suite members according to their Θ 1 . All suite members with positive Θ 1 are assumed to be physical companions of the MD. About 58% of the sample are members of physical groups. The distribution of suites by the number of members, n, follows a relation N(n) ∼ n –2 . The 20 most populated suites contain 468 galaxies, i.e., 59% of the UNGC sample. The fraction of MDs among the brightest galaxies is almost 100% and drops to 50% at M B = –18 m . We discuss various properties of MDs, as well as galaxies belonging to their suites. The suite abundance practically does not depend on the morphological type, linear diameter, or hydrogen mass of the MD, the tightest correlation being with the MD dynamical mass. Dwarf galaxies around MDs exhibit well-known segregation effects: the population of the outskirts has later morphological types, richer H I contents, and higher rates of star formation activity. Nevertheless, there are some intriguing cases where dwarf spheroidal galaxies occur at the far periphery of the suites, as well as some late-type dwarfs residing close to MDs. Comparing simulation results with galaxy groups, most studies assume the Local Group is fairly typical. However, we recognize that the nearby groups significantly differ from each other and there is considerable variation in their properties. The suites of companions around the Milky Way and M31, consisting of the Local Group, do not

Space Suit Joint Torque Measurement Method Validation

Science.gov (United States)

Valish, Dana; Eversley, Karina

2012-01-01

In 2009 and early 2010, a test method was developed and performed to quantify the torque required to manipulate joints in several existing operational and prototype space suits. This was done in an effort to develop joint torque requirements appropriate for a new Constellation Program space suit system. The same test method was levied on the Constellation space suit contractors to verify that their suit design met the requirements. However, because the original test was set up and conducted by a single test operator there was some question as to whether this method was repeatable enough to be considered a standard verification method for Constellation or other future development programs. In order to validate the method itself, a representative subset of the previous test was repeated, using the same information that would be available to space suit contractors, but set up and conducted by someone not familiar with the previous test. The resultant data was compared using graphical and statistical analysis; the results indicated a significant variance in values reported for a subset of the re-tested joints. Potential variables that could have affected the data were identified and a third round of testing was conducted in an attempt to eliminate and/or quantify the effects of these variables. The results of the third test effort will be used to determine whether or not the proposed joint torque methodology can be applied to future space suit development contracts.

Sibelius. Karelia Suite, Op. 11 / Robert Layton

Index Scriptorium Estoniae

Layton, Robert

1996-01-01

Uuest heliplaadist "Sibelius. Karelia Suite, Op. 11. Luonnotar, Op. 70 a. Andante festivo. The Oceanides, Op. 73. King Christian II, Op. 27-Suite. Finlandia, Op. 26a. Gothenburg Symphony Orchester, Neeme Järvi" DG 447 760-2GH (72 minutes: DDD)

Kodutus Eestis - kas indiviidi või ühiskonna probleem? / Jüri Kõre, Riina Kiik, Eva Kõiv

Index Scriptorium Estoniae

Kõre, Jüri, 1953-

2005-01-01

Kodutuse ajaloolisest taustast ja põhjustest. Tartu linna kodutute hulgas 2003.-2004. a. tehtud uurimusest ning Eva Kõivu magistritööst "Kodutus Tartu linnas: Põhjused ja võimalikud lahendused". Diagrammid: Tartu koduta inimeste jaotus kodutuse kestuse järgi; Intervjueeritute sissetulekuallikad

Open architecture of smart sensor suites

Science.gov (United States)

Müller, Wilmuth; Kuwertz, Achim; Grönwall, Christina; Petersson, Henrik; Dekker, Rob; Reinert, Frank; Ditzel, Maarten

2017-10-01

Experiences from recent conflicts show the strong need for smart sensor suites comprising different multi-spectral imaging sensors as core elements as well as additional non-imaging sensors. Smart sensor suites should be part of a smart sensor network - a network of sensors, databases, evaluation stations and user terminals. Its goal is to optimize the use of various information sources for military operations such as situation assessment, intelligence, surveillance, reconnaissance, target recognition and tracking. Such a smart sensor network will enable commanders to achieve higher levels of situational awareness. Within the study at hand, an open system architecture was developed in order to increase the efficiency of sensor suites. The open system architecture for smart sensor suites, based on a system-of-systems approach, enables combining different sensors in multiple physical configurations, such as distributed sensors, co-located sensors combined in a single package, tower-mounted sensors, sensors integrated in a mobile platform, and trigger sensors. The architecture was derived from a set of system requirements and relevant scenarios. Its mode of operation is adaptable to a series of scenarios with respect to relevant objects of interest, activities to be observed, available transmission bandwidth, etc. The presented open architecture is designed in accordance with the NATO Architecture Framework (NAF). The architecture allows smart sensor suites to be part of a surveillance network, linked e.g. to a sensor planning system and a C4ISR center, and to be used in combination with future RPAS (Remotely Piloted Aircraft Systems) for supporting a more flexible dynamic configuration of RPAS payloads.

Correction factors for assessing immersion suits under harsh conditions.

Science.gov (United States)

Power, Jonathan; Tikuisis, Peter; Ré, António Simões; Barwood, Martin; Tipton, Michael

2016-03-01

Many immersion suit standards require testing of thermal protective properties in calm, circulating water while these suits are typically used in harsher environments where they often underperform. Yet it can be expensive and logistically challenging to test immersion suits in realistic conditions. The goal of this work was to develop a set of correction factors that would allow suits to be tested in calm water yet ensure they will offer sufficient protection in harsher conditions. Two immersion studies, one dry and the other with 500 mL of water within the suit, were conducted in wind and waves to measure the change in suit insulation. In both studies, wind and waves resulted in a significantly lower immersed insulation value compared to calm water. The minimum required thermal insulation for maintaining heat balance can be calculated for a given mean skin temperature, metabolic heat production, and water temperature. Combining the physiological limits of sustainable cold water immersion and actual suit insulation, correction factors can be deduced for harsh conditions compared to calm. The minimum in-situ suit insulation to maintain thermal balance is 1.553-0.0624·TW + 0.00018·TW(2) for a dry calm condition. Multiplicative correction factors to the above equation are 1.37, 1.25, and 1.72 for wind + waves, 500 mL suit wetness, and both combined, respectively. Calm water certification tests of suit insulation should meet or exceed the minimum in-situ requirements to maintain thermal balance, and correction factors should be applied for a more realistic determination of minimum insulation for harsh conditions. Crown Copyright © 2015. Published by Elsevier Ltd. All rights reserved.

Z-2 Prototype Space Suit Development

Science.gov (United States)

Ross, Amy; Rhodes, Richard; Graziosi, David; Jones, Bobby; Lee, Ryan; Haque, Bazle Z.; Gillespie, John W., Jr.

2014-01-01

NASA's Z-2 prototype space suit is the highest fidelity pressure garment from both hardware and systems design perspectives since the Space Shuttle Extravehicular Mobility Unit (EMU) was developed in the late 1970's. Upon completion the Z-2 will be tested in the 11 foot human-rated vacuum chamber and the Neutral Buoyancy Laboratory (NBL) at the NASA Johnson Space Center to assess the design and to determine applicability of the configuration to micro-, low- (asteroid), and planetary- (surface) gravity missions. This paper discusses the 'firsts' that the Z-2 represents. For example, the Z-2 sizes to the smallest suit scye bearing plane distance for at least the last 25 years and is being designed with the most intensive use of human models with the suit model.

[Optimal intravascular brachytherapy: safety and radiation protection, reliability and precision guaranteed by guidelines, recommendations and regulatory requirements].

Science.gov (United States)

Quast, Ulrich; Kaulich, Theodor W; Lorenz, Joachim

2002-02-01

The success of intravascular brachytherapy relies entirely on the interdisciplinary approach. Interventional cardiologists, radiation oncologists and medical physicists must form a team from day 1. All members of the team need special knowledge and regular training in the field of vascular radiation therapy. Optimization of intravascular brachytherapy requires the use of standardized methods of dose specification, recording and reporting. This also implies using standardized methods of source calibration in terms of absorbed dose to water and having methods for simple internal control of the dosimetric quantities of new or replaced sources. Guidance is offered by international recommendations (AAPM TG 60, DGMP Report 16, NCS and EVA GEC-ESTRO). LEGAL REQUIREMENTS FOR RADIATION PROTECTION--WHAT'S NEW?: In Europe, new legal requirements on radiation protection issues have to be fulfilled. For Germany, the revised "Strahlenschutzverordnung" has been released recently. Nearly all organizational and medical processes are affected. For intravascular brachytherapy, several changes of requirements have to be considered. However, to follow these requirements does not cause serious problems. DGMP REPORT 16: GUIDELINES FOR MEDICAL PHYSICAL ASPECTS OF INTRAVASCULAR BRACHYTHERAPY: Evaluation of clinical results by comparison of intravascular brachytherapy treatment parameters is possible only if the prescribed dose and the applied dose distribution are reported clearly, completely and uniformly. The DGMP guidelines thus recommend to prescribe the dose to water at the system related reference point PRef at 2 mm radial distance for intracoronary application (and at 5 mm for peripheral vessels). The mean dose at 1 mm tissue depth (respectively at 2 mm) should be reported in addition. To safely define the planning target volume from the injured length, safety margins of at least 5 mm (10 mm) have to be taken into account on both ends. Safety margins have also to be considered for

Cement blocks with EVA waste for extensive modular green roof: contribution of the components for thermal insulation

Directory of Open Access Journals (Sweden)

A. B. DE MELO

Full Text Available Abstract Green roofs can contribute in many ways to the quality of the environment, being known for reducing the heat transfer to the interior of the buildings. Amongst the available techniques for the execution of this type of covering, the use of light cement blocks which are compatible with the system of extensive modular green roofs is proposed. For the light cement blocks, produced with EVA aggregates (waste from the footwear industry, an additional contribution in the capacity of thermal insulation of the proposed green roof is expected. In the present article, the demonstration of such contribution is intended through measurements carried out in prototypes in hot and humid climates. After characterizing the capacity of thermal insulation of the proposed green roof, with different types of conventional covering as a reference, an additional contribution of the component used in this green roof was identified by making comparisons with measurements collected from another green roof, executed with cement blocks without the presence of the EVA aggregates. In the experiments, external and internal surface temperatures were measured in each of the prototypes' coverings, as well as the air temperatures in the internal and external environments. From the analysis of the data for a typical summer day, it was possible to prove that the proposed green roof presented the lowest temperature ranges, considering the internal air and surface temperatures. The presence of the EVA aggregates in the proposed blocks contributed to the decrease of the internal temperatures.

Determination of the linear coefficient of thermal expansion in polymer films at the nanoscale: influence of the composition of EVA copolymers and the molecular weight of PMMA.

Science.gov (United States)

González-Benito, J; Castillo, E; Cruz-Caldito, J F

2015-07-28

Nanothermal-expansion of poly(ethylene-co-vinylacetate), EVA, and poly(methyl methacrylate), PMMA, in the form of films was measured to finally obtain linear coefficients of thermal expansion, CTEs. The simple deflection of a cantilever in an atomic force microscope, AFM, was used to monitor thermal expansions at the nanoscale. The influences of: (a) the structure of EVA in terms of its composition (vinylacetate content) and (b) the size of PMMA chains in terms of the molecular weight were studied. To carry out this, several polymer samples were used, EVA copolymers with different weight percents of the vinylacetate comonomer (12, 18, 25 and 40%) and PMMA polymers with different weight average molecular weights (33.9, 64.8, 75.600 and 360.0 kg mol(-1)). The dependencies of the vinyl acetate weight fraction of EVA and the molecular weight of PMMA on their corresponding CTEs were analyzed to finally explain them using new, intuitive and very simple models based on the rule of mixtures. In the case of EVA copolymers a simple equation considering the weighted contributions of each comonomer was enough to estimate the final CTE above the glass transition temperature. On the other hand, when the molecular weight dependence is considered the free volume concept was used as novelty. The expansion of PMMA, at least at the nanoscale, was well and easily described by the sum of the weighted contributions of the occupied and free volumes, respectively.

Homogeneity characterization of ethylene-co-vinyl acetate copolymer (EVA) and hydrophobic silica nanocomposite by low field NMR

International Nuclear Information System (INIS)

Stael, Giovanni Chaves; Tavares, Maria I.B.

2005-01-01

This project proposes the characterization of a polymeric matrix composite material using nanometric scale hydrophobic silica as charge element, with the ethylene-vinyl acetate (EVA), by using the spin-lattice relaxation time measurement applying the low field NMR

Problem of Office Suite Training at the University

Directory of Open Access Journals (Sweden)

Natalia A. Nastashchuk

2013-01-01

Full Text Available Te paper considers the problem of office suite applications training, caused by a rapid change of their versions, variety of software developers and a rapid development of software and hardware platforms. The content of office suite applications training, based on the system of office suite notions, its basic functional and standards of information technologies development (OpenDocument Format Standard, ISO 26300-200Х is presented.

46 CFR 199.214 - Immersion suits and thermal protective aids.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Immersion suits and thermal protective aids. 199.214... Passenger Vessels § 199.214 Immersion suits and thermal protective aids. (a) Each passenger vessel must... an immersion suit. (c) The immersion suits and thermal protective aids required under paragraphs (a...

Physicochemical and enzimatic transformations of "eva" apples stored under modified atmosphere

Directory of Open Access Journals (Sweden)

Ariela Betsy Thomas

2014-08-01

Full Text Available The need for a permanent market supply of fresh fruit has generated great interest in postharvest techniques that can promote useful life and quality of the fruit. The aim of this study was to evaluate the efficiency of atmospheric modification using different polymeric films in maintaining postharvest quality and prolonging the shelf life of Eva (Mallus sp apples. For this, fruits from the city of Barbacena - MG, selected and sanitized were packed in plastic trays and wrapped in the corresponding films. The films used were: polypropylene - 20 µm, low-density polyethylene - 14 µm and high-density polyethylene - 7 µm. Another group of fruits (control was not submitted to a modified atmosphere. Subsequently, all the the packages were stored under refrigeration (0 ° C ± 0.5 for 210 days and the evaluations of the following variables were performed every 30 days of storage: hydrogen potential (pH, titratable acidity, soluble solids, weight loss, firmness, total pectin, soluble pectin, pectin methyl esterase and polygalacturonase. The work was conducted in a completely randomized design (4x8, with 4 treatments and 8 experimental times. Each treatment consisted of three replicates and each experimental unit consisted of six fruits. The results were submitted to variance analysis and means were compared by the Tukey test at 5% probability and regression analysis. The low density polyethylene (14 µm packaging provided the best conservation of the Eva cultivar apple textural characteristics.

PLEASE: The Python Low-energy Electron Analysis SuitE – Enabling Rapid Analysis of LEEM and LEED Data

Directory of Open Access Journals (Sweden)

Maxwell Grady

2018-02-01

Full Text Available PLEASE, the Python Low-energy Electron Analysis SuitE, provides an open source and cross-platform graphical user interface (GUI for rapid analysis and visualization of low energy electron microscopy (LEEM data sets. LEEM and the associated technique, selected area micro-spot low energy electron diffraction (μ-LEED, are powerful tools for analysis of the surface structure for many novel materials. Specifically, these tools are uniquely suited for the characterization of two-dimensional materials. PLEASE offers a user-friendly point-and-click method for extracting intensity-voltage curves from LEEM and LEED data sets. Analysis of these curves provides insight into the atomic structure of the target material surface with unparalleled resolution.

Human-Robot Teaming in a Multi-Agent Space Assembly Task

Science.gov (United States)

Rehnmark, Fredrik; Currie, Nancy; Ambrose, Robert O.; Culbert, Christopher

2004-01-01

NASA's Human Space Flight program depends heavily on spacewalks performed by pairs of suited human astronauts. These Extra-Vehicular Activities (EVAs) are severely restricted in both duration and scope by consumables and available manpower. An expanded multi-agent EVA team combining the information-gathering and problem-solving skills of humans with the survivability and physical capabilities of robots is proposed and illustrated by example. Such teams are useful for large-scale, complex missions requiring dispersed manipulation, locomotion and sensing capabilities. To study collaboration modalities within a multi-agent EVA team, a 1-g test is conducted with humans and robots working together in various supporting roles.

The causes of medical malpractice suits against radiologists in the United States.

Science.gov (United States)

Whang, Jeremy S; Baker, Stephen R; Patel, Ronak; Luk, Lyndon; Castro, Alejandro

2013-02-01

To determine the most frequent causes of malpractice suits as derived from credentialing data of 8401 radiologists. This study was approved by the Institutional Review Board of New Jersey Medical School. A total of 8401 radiologists in 47 states participating in the network of One-Call Medical, a broker for computed tomographic/magnetic resonance studies in workers' compensation cases, were required to provide their malpractice history as part of their credentialing application. Of these, 2624 (31%) radiologists had at least one claim in their career. In each enrollee's credentialing file, if there was a claim against the enrollee there was a narrative regarding each malpractice case from which, in most instances, a primary allegation could be discerned. Among the 4793 cases, an alleged cause could be derived from the narrative in 4043 (84%). Statistical analysis was performed with Stata 12 (2011; Stata, College Station, Tex) software. The most common general cause was error in diagnosis (14.83 claims per 1000 person-years [95% confidence interval {CI}: 14.19, 15.51]). In this category, breast cancer was the most frequently missed diagnosis (3.57 claims per 1000 person-years [95% CI: 3.26, 3.91]), followed by nonspinal fractures (2.49 claims per 1000 person-years [95% CI: 2.28, 2.72]), spinal fractures (1.32 claims per 1000 person-years [95% CI: 1.16, 1.49]), lung cancer (1.26 claims per 1000 person-years [95% CI: 1.11, 1.42]), and vascular disease (1.08 claims per 1000 person-years [95% CI: 0.93, 1.24]). The category next in frequency was procedural complications (1.76 claims per 1000 person-years [95% CI: 1.58, 1.96]), followed by inadequate communication with either patient (0.40 claim per 1000 person-years [95% CI: 0.32, 0.50]) or referrer (0.71 claim per 1000 person-years [95% CI: 0.60, 0.84]). Radiologists had only a peripheral role in 0.92 claim per 1000 person-years (95% CI: 0.77, 1.10). Failure to recommend additional testing was a rare cause (0.41 claim

Homogeneity characterization of ethylene-co-vinyl acetate copolymer (EVA) and hydrophobic silica nanocomposite by low field NMR; Caracterizacao da homogeneidade de nanocomposito do copolimero etileno acetato de vinila (EVA) e silica hidrofobica atraves de ressonancia magnetica nuclear de baixo campo

Energy Technology Data Exchange (ETDEWEB)

Stael, Giovanni Chaves [Observatorio Nacional, Rio de Janeiro, RJ (Brazil). Dept. de Geofisica (DGE); Tavares, Maria I.B. [Universidade Federal do Rio de Janeiro, RJ (Brazil). Inst. de Macromoleculas

2005-07-01

This project proposes the characterization of a polymeric matrix composite material using nanometric scale hydrophobic silica as charge element, with the ethylene-vinyl acetate (EVA), by using the spin-lattice relaxation time measurement applying the low field NMR.

A new device for the inflation of the antigravity suit.

Science.gov (United States)

Brodrick, P M

1986-02-01

The 'Schuco' orthopaedic tourniquet inflator can be simply converted into a suitable device for inflating an antigravity suit (G-suit). The antigravity suit may be used on neurosurgical patients undergoing procedures in the sitting position to help prevent hypotension and air embolism. The availability of this device may encourage the more widespread use of an antigravity suit in neuro-anaesthetic practice.

Low Power, Small Form Factor, High Performance EVA Radio Employing Micromachined Contour Mode Piezoelectric Resonators and Filters, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — In Phase I Harmonic Devices proposes to investigate the feasibility of a low-power, low-volume, lightweight, frequency agile, and fault tolerant EVA radio based on...

Transcatheter Embolisation of Proximal Type 1 Endoleaks Following Endovascular Aneurysm Sealing (EVAS) Using the Nellix Device: Technique and Outcomes

Energy Technology Data Exchange (ETDEWEB)

Ameli-Renani, S., E-mail: seyedameli@doctors.org.uk; Morgan, R. A., E-mail: Robert.morgan@stgeorges.nhs.uk [St George’s Hospital, Department of Radiology (United Kingdom)

2015-10-15

AimTo evaluate the technical success and mid-term outcomes following transcatheter embolisation of type 1a endoleak after Nellix endovascular aneurysm sealing (EVAS).Materials and MethodsSeven patients (5 men; mean age 83; range 79–90) underwent transcatheter embolisation between July 2013 and August 2014. The average time from EVAS to embolisation was 136 days (range 6–301) and from endoleak diagnosis to embolisation was 20 days (range 2–50). Embolisation was performed with coils and Onyx in six cases and Onyx only in one case. Technical success, imaging and clinical outcomes of embolisation were reviewed. Technical success was defined as elimination of the endoleak on completion angiography and first imaging follow-up. Clinical success was defined as unchanged or decreased aneurysm sac size on subsequent follow-up (average 8 months; range 103–471 days).ResultsAll cases were technically successful. One patient required a second endovascular procedure following Onyx reflux into the Nellix endograft and another patient required surgical closure of a brachial puncture site. All patients are endoleak free with stable sac size on the latest available follow-up imaging.ConclusionIf a type 1 endoleak occurs after EVAS, embolisation using Onyx with or without coils is feasible and effective with high technical success and freedom from endoleak recurrence at mid-term follow-up.

Transcatheter Embolisation of Proximal Type 1 Endoleaks Following Endovascular Aneurysm Sealing (EVAS) Using the Nellix Device: Technique and Outcomes

International Nuclear Information System (INIS)

Ameli-Renani, S.; Morgan, R. A.

2015-01-01

AimTo evaluate the technical success and mid-term outcomes following transcatheter embolisation of type 1a endoleak after Nellix endovascular aneurysm sealing (EVAS).Materials and MethodsSeven patients (5 men; mean age 83; range 79–90) underwent transcatheter embolisation between July 2013 and August 2014. The average time from EVAS to embolisation was 136 days (range 6–301) and from endoleak diagnosis to embolisation was 20 days (range 2–50). Embolisation was performed with coils and Onyx in six cases and Onyx only in one case. Technical success, imaging and clinical outcomes of embolisation were reviewed. Technical success was defined as elimination of the endoleak on completion angiography and first imaging follow-up. Clinical success was defined as unchanged or decreased aneurysm sac size on subsequent follow-up (average 8 months; range 103–471 days).ResultsAll cases were technically successful. One patient required a second endovascular procedure following Onyx reflux into the Nellix endograft and another patient required surgical closure of a brachial puncture site. All patients are endoleak free with stable sac size on the latest available follow-up imaging.ConclusionIf a type 1 endoleak occurs after EVAS, embolisation using Onyx with or without coils is feasible and effective with high technical success and freedom from endoleak recurrence at mid-term follow-up

Development on smart suit for dairy work assistance.

Science.gov (United States)

Nara, Hiroyuki; Kusaka, Takashi; Tanaka, Takayuki; Yamagishi, Takayuki; Ogura, Shotaroh

2013-01-01

Our purpose in this study is to achieve an independent life and a social involvement for the elderly using KEIROKA Technology(fatigue-reduction) which makes it possible to improve the quality of chores and occupations by removing excessive strain and tiredness. The authors have developed power assist suits named "smart suit". The authors have evaluated the effect that the purpose of dairy work assistance, to measure EMG of the worker, compared to the potential of the surface of the non-wearing and wearing "smart suit".

Las manifestaciones colectivas de duelo frente a la muerte de Eva Perón (Tucumán, 1952

Directory of Open Access Journals (Sweden)

Lucía Santos Lepera

2013-02-01

Full Text Available El objetivo del trabajo es analizar las manifestaciones colectivas de duelo que se desplegaron a partir de la muerte de Eva Perón el 26 de julio de 1952 en la provincia de Tucumán. En primer lugar, nos interesa analizar el rol que ocupó la institución eclesiástica en el programa de homenajes oficiales y, de este modo, dar cuenta de la multiplicación inédita de manifestaciones de fervor religioso visibles en ese contexto. En segundo lugar, nos proponemos avanzar en el análisis de las expresiones religiosas populares que rodearon la muerte de Eva Perón, las cuales conformaron una puesta en escena de la unión entre la Iglesia y el gobierno, y de la imbricación entre catolicismo y peronismo.

A evasão sob o olhar dos professores e alunos do curso de licenciatura em matemática do Campus Universitário de Sinop da Universidade do Estado de Mato Grosso – UNEMAT, em 2011/2

Directory of Open Access Journals (Sweden)

Luciana Mafalda Elias de Assis

2015-06-01

Full Text Available Este artigo apresenta os resultados de uma pesquisa sobre possíveis causas de evasão em um curso de licenciatura em Matemática de uma Universidade pública (UNEMAT. Alunos do curso e professores responderam questionários com perguntas relacionadas ao tema, além dos alunos evadidos do curso que ingressaram em 2011/2. A análise das respostas indica as possíveis causas da evasão e fornece alguns indicativos em como minimizar a evasão no curso. Palavras-chave: evasão; ensino superior; licenciatura em matemática; pesquisa qualitativa.

Immersion Suit Usage Within the RAAF

Science.gov (United States)

1992-01-01

IMMERSION SUIT USED UVIC QDIS HOLDINGS 202. in 12 Sizes, held by ALSS 492SQN REQUIREMENTS No comment USAGE POLICY REFERENCE DIRAF) AAP 7215.004-1 (P3C...held by ALSS 492SQN. REQUIREMENTS No comment ISACE POLICY REFERENCE DIIAF) AAP 7215.004-1 (P3C Flight Manual) RAAF Supplement No 92 USAGE POUICY UVIC...TYPE P3C REFERENCE Telecon FLTLT Toft I I SQNfRESO AVMED Dated 22 Mar 91 IMMERSION SUIT USED UVIC QDIS HOLDINGS No comment REQUIREMENTS No comment USAGE

Aasta betoonehitise žürii kommentaarid võistlustöödele ja võitjaile / Eva Kiisler, Maritta Koivisto, Angel Andla...[jt.] ; intervjueerinud Mari Sarv ; kommenteerinud Mart Riikoja

Index Scriptorium Estoniae

2009-01-01

Konkursile "Aasta Betoonehitis 2008" annavad hinnangu Eva Kiisler (ajakirja "Ehitaja" peatoimetaja), Maritta Koivisto (Soome ajakirja "Betoni" peatoimetaja"), Angel Andla (Eesti Ehitusettevõtjate Liit), Heiki Meos (Eesti Ehitusinseneride Liit), Siim Sultson ("Äripäeva" ehitusvaldkonna toimetaja), Toomas Laur (Eesti Betooniühing), Ike Volkov (Eesti Arhitektide Liidu esimees), Mauno Inkinen (Eesti Projektbüroode Liit), Enno Rebane (Eesti Ehitusmaterjalide Tootjate Liidu tegevdirektor). Mart Riikoja žürii tööst

Content-based Music Search and Recommendation System

Science.gov (United States)

Takegawa, Kazuki; Hijikata, Yoshinori; Nishida, Shogo

Recently, the turn volume of music data on the Internet has increased rapidly. This has increased the user's cost to find music data suiting their preference from such a large data set. We propose a content-based music search and recommendation system. This system has an interface for searching and finding music data and an interface for editing a user profile which is necessary for music recommendation. By exploiting the visualization of the feature space of music and the visualization of the user profile, the user can search music data and edit the user profile. Furthermore, by exploiting the infomation which can be acquired from each visualized object in a mutually complementary manner, we make it easier for the user to search music data and edit the user profile. Concretely, the system gives to the user an information obtained from the user profile when searching music data and an information obtained from the feature space of music when editing the user profile.

Processing of nanocomposites EVA/PVC/MMT in twin-screw extruder; Processamento de nanocompositos EVA/PVC/MMT em extrusora dupla rosca

Energy Technology Data Exchange (ETDEWEB)

Gehlen, A.; Barbutti Filho, W.R.; Francisquetti, E.L.; Andrade, M.Z.; Zattera, A.J., E-mail: ajzatter@ucs.b [Universidade de Caxias do Sul (UCS), RS (Brazil). Lab. de Polimeros

2010-07-01

Polymeric nanocomposites have some superior properties when compared to conventional polymer composites and is one of the most promising fields in the nanotechnology research. In a EVA (ethylene vinyl acetate) /PVC (poly vinyl chloride) matrix was incorporated different types of montmorillonite clays (an inorganic (Na{sup +}) and two organic modified (15A and 30B nanoclays). The mixtures were processed in a co-rotating twin-screw extruder at processing speeds of 200 and 400 rpm. Thermogravimetric analysis (TGA) shown that the inorganic and organic modified clays promoted a shift to higher temperatures in the degradation temperature., X-ray diffraction (XRD) and transmission electronic microscopy (TEM) shows a possible intercalation with the 15A clay, exfoliation with the 30B clay and formation of clusters in the Na{sup +} clay. For all clays studied, the increase in shear rate does not promote significant changes. (author)

IVA Ultrasonic and Eddy Current NDE for ISS

Data.gov (United States)

National Aeronautics and Space Administration — The project intends to develop a combined Ultrasonic and Eddy Current nondestructive evaluation (NDE) instrument for IVA use on ISS. A suite of IVA and EVA NDE...

Advanced Sensor Platform to Evaluate Manloads for Exploration Suit Architectures

Data.gov (United States)

National Aeronautics and Space Administration — Space suit manloads are defined as the outer bounds of force that the human occupant of a suit is able to exert onto the suit during motion. They are defined on a...

Alterations in MAST suit pressure with changes in ambient temperature.

Science.gov (United States)

Sanders, A B; Meislin, H W; Daub, E

1983-01-01

A study was undertaken to test the hypothesis that change in ambient air temperature has an effect on MAST suit pressure according to the ideal gas law. Two different MAST suits were tested on Resusci-Annie dummies. The MAST suits were applied in a cold room at 4.4 degrees C and warmed to 44 degrees C. Positive linear correlations were found in nine trials, but the two suits differed in their rate of increase in pressure. Three trials using humans were conducted showing increased pressure with temperature but at a lesser rate than with dummies. A correlation of 0.5 to 1.0 mm Hg increase in MAST suit pressure for each 1.0 degrees C increase in ambient temperature was found. Implications are discussed for the use of the MAST suit in environmental conditions where the temperature changes.

A evasão na educação superior para o curso de bacharelado em sistema de informação

Directory of Open Access Journals (Sweden)

Michelli Slhessarenko

2014-03-01

Full Text Available http://dx.doi.org/10.5007/1983-4535.2014v7n1p128 O artigo faz menção à evasão de alunos do curso de Bacharelado em Sistema de Informação de uma Instituição Federal de Educação em Santa Catarina entre os anos de 2010 e 2011. Objetivou-se identificar as causas contribuintes para a evasão de alunos do curso e propor uma estratégia de marketing em serviços para reduzir a evasão de alunos. A metodologia utilizada compreende um estudo de caso de natureza qualitativa, procedimento de pesquisa documental A técnica utilizada para coleta de dados foram o questionário e a entrevista estruturada aplicada aos alunos evadidos do curso e representantes administrativos da instituição. A análise dos dados obtidos apontam como principais causas de evasão: a mudança de interesse, opção de vida ou indecisão profissional, a didática não eficiente dos professores, expectativas não atendidas em relação ao curso, a carga horária semanal de trabalho, os aspectos inadequados das salas de aula ao ensino, a falta de orientação adequada por parte da coordenação do curso e as dificuldades de acompanhamento do curso. As estratégias de marketing devem preocupar-se com o bem estar do aluno, sua orientação e adequação ao curso, preparando professores e melhorando a didática de ensino.

Safety Precautions and Operating Procedures in an (A)BSL-4 Laboratory: 1. Biosafety Level 4 Suit Laboratory Suite Entry and Exit Procedures.

Science.gov (United States)

Janosko, Krisztina; Holbrook, Michael R; Adams, Ricky; Barr, Jason; Bollinger, Laura; Newton, Je T'aime; Ntiforo, Corrie; Coe, Linda; Wada, Jiro; Pusl, Daniela; Jahrling, Peter B; Kuhn, Jens H; Lackemeyer, Matthew G

2016-10-03

Biosafety level 4 (BSL-4) suit laboratories are specifically designed to study high-consequence pathogens for which neither infection prophylaxes nor treatment options exist. The hallmarks of these laboratories are: custom-designed airtight doors, dedicated supply and exhaust airflow systems, a negative-pressure environment, and mandatory use of positive-pressure ("space") suits. The risk for laboratory specialists working with highly pathogenic agents is minimized through rigorous training and adherence to stringent safety protocols and standard operating procedures. Researchers perform the majority of their work in BSL-2 laboratories and switch to BSL-4 suit laboratories when work with a high-consequence pathogen is required. Collaborators and scientists considering BSL-4 projects should be aware of the challenges associated with BSL-4 research both in terms of experimental technical limitations in BSL-4 laboratory space and the increased duration of such experiments. Tasks such as entering and exiting the BSL-4 suit laboratories are considerably more complex and time-consuming compared to BSL-2 and BSL-3 laboratories. The focus of this particular article is to address basic biosafety concerns and describe the entrance and exit procedures for the BSL-4 laboratory at the NIH/NIAID Integrated Research Facility at Fort Detrick. Such procedures include checking external systems that support the BSL-4 laboratory, and inspecting and donning positive-pressure suits, entering the laboratory, moving through air pressure-resistant doors, and connecting to air-supply hoses. We will also discuss moving within and exiting the BSL-4 suit laboratories, including using the chemical shower and removing and storing positive-pressure suits.

Entre Lilith y Eva: Björk canta E. E. Cummings

Directory of Open Access Journals (Sweden)

Jordi Mas López

2016-05-01

del poeta norteamericano en Sun In My Mouth y el resto de composiciones de Vespertine. Frente a la inequívoca exaltación del héroe solar de Cummings, Björk utiliza una mirada femenina que duda entre los referentes de Lilith, la mujer que encuentra su libertad fuera de la sociedad, y Eva, aquella cuya sumisión es socialmente productiva. El resultado es un discurso de gran valor artístico, pero sujeto, en lo ideológico, a las limitaciones que imponen los motivos de partida

Study on thermal properties and crystallization behavior of electron beam irradiated ethylene vinyl acetate (EVA)/waste tyre dust (WTD) blends in the presence of polyethylene graft maleic anhydride (PEgMAH)

Energy Technology Data Exchange (ETDEWEB)

Ramli, Syuhada; Ahmad, S. H. [School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan (Malaysia); Ratnam, C. T. [Radiation Processing Technology Division, Malaysian Nuclear Agency (Nuclear Malaysia), Bangi, 43000 Kajang (Malaysia); Athirah, Nurul [School of Materials and Mineral Resources, USM Engineering Campus (Malaysia)

2013-11-27

The aim of this article is to show the effects of the electron beam irradiation dose and presence of a compatibiliser on the thermal properties and crystallinity of EVA/WTD blends. The purpose of applying electron beam radiation with doses range 50 to 200 kGy and adding a compatibiliser was to enhance the compatibility of the studied blends and at the same time to investigate the possibility of using this technique in the process of recycling polymeric materials. As the compatibilisers, the polyethylene grafted maleic anhydride (PEgMAH) was utilized, they were added at the amounts of 1-5 phr respectively. The enhancement of thermal properties was accompanied by the following effects, discussed in this article: i) an irradiated EVA/WTD blend at 200kGy was found to improve the thermal properties of EVA, ii) the addition of PEgMAH in EVA/WTD blends and the subsequent irradiation allowed prevention of degradation mechanism. iii) the ΔH{sub f} and crystallinity percentage decrease at higher PEgMAH content.

Robot hands and extravehicular activity

Science.gov (United States)

Marcus, Beth

1987-01-01

Extravehicular activity (EVA) is crucial to the success of both current and future space operations. As space operations have evolved in complexity so has the demand placed on the EVA crewman. In addition, some NASA requirements for human capabilities at remote or hazardous sites were identified. One of the keys to performing useful EVA tasks is the ability to manipulate objects accurately, quickly and without early or excessive fatigue. The current suit employs a glove which enables the crewman to perform grasping tasks, use tools, turn switches, and perform other tasks for short periods of time. However, the glove's bulk and resistance to motion ultimately causes fatigue. Due to this limitation it may not be possible to meet the productivity requirements that will be placed on the EVA crewman of the future with the current or developmental Extravehicular Mobility Unit (EMU) hardware. In addition, this hardware will not meet the requirements for remote or hazardous operations. In an effort to develop ways for improving crew productivity, a contract was awarded to develop a prototype anthromorphic robotic hand (ARH) for use with an extravehicular space suit. The first step in this program was to perform a a design study which investigated the basic technology required for the development of an ARH to enhance crew performance and productivity. The design study phase of the contract and some additional development work is summarized.

Planetary Protection Considerations in EVA System Design

Science.gov (United States)

Eppler, Dean B.; Kosmo, Joseph J.

2011-01-01

very little expression of these anomalies. hardware from the human-occupied area may limit (although not likely eliminate) external materials in the human habitat. Definition of design-to requirements is critical to understanding technical feasibility and costs. The definition of Planetary Protection needs in relation to EVA mission and system element development cost impacts should be considered and interpreted in terms of Plausible Protection criteria. Since EVA operations will have the most direct physical interaction with the Martian surface, PP needs should be considered in the terms of mitigating hardware and operations impacts and costs.

Study of electron beam irradiation effects on morphologic properties of the PET/PP/PE/EVA polymeric blend

International Nuclear Information System (INIS)

Rossini, Edvaldo L.; Silva, Leonardo G. Andrade e; Wiebeck, Helio

2009-01-01

Amidst the pollutants, plastics and especially the 'PET bottles' packaging type, which comprise of poly(ethylene terephthalate) (PET), polypropylene (PP), polyethylene (PE) and poly[ethylene-co-(vinyl acetate)] (EVA) have been causing big damage to the environment. In this work, the polymeric blend PET/PP/PE/EVA was obtained by mechanical recycling 'PET bottles' after consumption, with the objective of finding a solution for this environmental problem. It was also studied the different ionizing radiation dose effects (25, 50, 75, 100, 150, 200, 300, 400 and 500 kGy) on the blend properties using an electron beam accelerator. The morphologic properties of the non-irradiated and irradiated polymeric blend were evaluated by the Light Microscopy (LM) and Scanning Electron Microscopy (SEM). The analysis of the results appeared to be a not mixing and compatible blend. The use of the ionizing radiation improved the homogeneity of the blend. These modifications have been randomized and irregular, depending directly on the dose of applied radiation. (author)

Assessment of health-cost externalities of air pollution at the national level using the EVA model system

Energy Technology Data Exchange (ETDEWEB)

Brandt, J.; Silver, J.D.; Frohn, L.M. (and others)

2011-07-15

Air pollution has significant negative impacts on human health and well-being, which entail substantial economic consequences. We have developed an integrated model system, EVA (External Valuation of Air pollution; Frohn et al., 2005; Andersen et al., 2007; Brandt et al., 2010), to assess health-related economic externalities of air pollution resulting from specific emission sources or sectors. The EVA system was initially developed to assess externalities from power production, but in this study it is extended to evaluate costs at the national level from all major emission sectors. In this study, we estimate the impacts and total externality costs from the main emission sectors in Denmark, representing the 10 major SNAP codes. Furthermore, we assess the impacts and externality costs of all emissions simultaneously from the whole of Europe as well as from international ship traffic in general, since this sector seems to be very important but is currently unregulated. (Author)

Study of electron beam irradiation effects on morphologic properties of the PET/PP/PE/EVA polymeric blend

Energy Technology Data Exchange (ETDEWEB)

Rossini, Edvaldo L.; Silva, Leonardo G. Andrade e, E-mail: lgasilva@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Wiebeck, Helio, E-mail: hwiebeck@usp.b [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica

2009-07-01

Amidst the pollutants, plastics and especially the 'PET bottles' packaging type, which comprise of poly(ethylene terephthalate) (PET), polypropylene (PP), polyethylene (PE) and poly[ethylene-co-(vinyl acetate)] (EVA) have been causing big damage to the environment. In this work, the polymeric blend PET/PP/PE/EVA was obtained by mechanical recycling 'PET bottles' after consumption, with the objective of finding a solution for this environmental problem. It was also studied the different ionizing radiation dose effects (25, 50, 75, 100, 150, 200, 300, 400 and 500 kGy) on the blend properties using an electron beam accelerator. The morphologic properties of the non-irradiated and irradiated polymeric blend were evaluated by the Light Microscopy (LM) and Scanning Electron Microscopy (SEM). The analysis of the results appeared to be a not mixing and compatible blend. The use of the ionizing radiation improved the homogeneity of the blend. These modifications have been randomized and irregular, depending directly on the dose of applied radiation. (author)

Planetary Suit Hip Bearing Model for Predicting Design vs. Performance

Science.gov (United States)

Cowley, Matthew S.; Margerum, Sarah; Harvil, Lauren; Rajulu, Sudhakar

2011-01-01

Designing a planetary suit is very complex and often requires difficult trade-offs between performance, cost, mass, and system complexity. In order to verifying that new suit designs meet requirements, full prototypes must eventually be built and tested with human subjects. Using computer models early in the design phase of new hardware development can be advantageous, allowing virtual prototyping to take place. Having easily modifiable models of the suit hard sections may reduce the time it takes to make changes to the hardware designs and then to understand their impact on suit and human performance. A virtual design environment gives designers the ability to think outside the box and exhaust design possibilities before building and testing physical prototypes with human subjects. Reductions in prototyping and testing may eventually reduce development costs. This study is an attempt to develop computer models of the hard components of the suit with known physical characteristics, supplemented with human subject performance data. Objectives: The primary objective was to develop an articulating solid model of the Mark III hip bearings to be used for evaluating suit design performance of the hip joint. Methods: Solid models of a planetary prototype (Mark III) suit s hip bearings and brief section were reverse-engineered from the prototype. The performance of the models was then compared by evaluating the mobility performance differences between the nominal hardware configuration and hardware modifications. This was accomplished by gathering data from specific suited tasks. Subjects performed maximum flexion and abduction tasks while in a nominal suit bearing configuration and in three off-nominal configurations. Performance data for the hip were recorded using state-of-the-art motion capture technology. Results: The results demonstrate that solid models of planetary suit hard segments for use as a performance design tool is feasible. From a general trend perspective

Modification of PE/PP Polymer Blend Nanocomposites with EPR and EVA Copolymers

Directory of Open Access Journals (Sweden)

Jelenčić, J.

2010-04-01

Full Text Available During the last decade, the use of polyolephinic polymers has been growing in a wide range of fields of applicability and the most widely used polymers are polyethylene and polypropylene. They can be processed separately to produce items with certain properties as well as in the form of blends, where special combinations of properties and price are intended. As it is known, polyethylene (PE and polypropylene (PP are incompatible and the weak interfacial bond strength between the phases directly linked to the blend morphology and results in poor mechanical properties. The properties of many polymer blends arise from the fine-scale structural arrangements or blend morphologies obtained during processing in addition to the proportion of each polymer type present. Compounding PE/PP blends with a single compatibilizer or their combination or some other additives as nanofiller, results in multi-component composites of great interest to research as they enable simultaneous improvement in the final properties of the blend. In addition, it is well known that the extrusion process has a significant effect on the dispersion of the filler in the blends. In this work, the mutual effect of the nanofiller silicium-dioxide (SiO2 and the compatibilizers ethylene-propylene copolymer (EPR and ethylene-vinyl acetate copolymer (EVA on the properties of blends based on polyethylene and polypropylene were studied. The morphology of the samples prepared with nanofiller and compatibilizers is much finer in comparison to the virgin blend. Better dispersion of nanofiller will result in better stability of the polymer blend and decrease in polymer flammability. The addition of the nanofiller and compatibilizers produced an increase in the elasticity especially for the samples prepared in the two-stage extrusion process where the nanofiller was first extruded with PE matrix and then with other polymers of the blends. SEM micrographs confirm finer morphology of samples

Satellite Ocean Heat Content Suite

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This collection contains an operational Satellite Ocean Heat Content Suite (SOHCS) product generated by NOAA National Environmental Satellite, Data, and Information...

Study of the suit inflation effect on crew safety during landing using a full-pressure IVA suit for new-generation reentry space vehicles

Science.gov (United States)

Wataru, Suzuki

Recently, manned space capsules have been recognized as beneficial and reasonable human space vehicles again. The Dragon capsule already achieved several significant successes. The Orion capsule is going to be sent to a high-apogee orbit without crews for experimental purposes in September 2014. For such human-rated space capsules, the study of acceleration impacts against the human body during splashdown is essential to ensure the safety of crews. Moreover, it is also known that wearing a full pressure rescue suit significantly increases safety of a crew, compared to wearing a partial pressure suit. This is mainly because it enables the use of a personal life support system independently in addition to that which installed in the space vehicle. However, it is unclear how the inflation of the full pressure suit due to pressurization affects the crew safety during splashdown, especially in the case of the new generation manned space vehicles. Therefore, the purpose of this work is to investigate the effect of the suit inflation on crew safety against acceleration impact during splashdown. For this objective, the displacements of the safety harness in relation with the suit, a human surrogate, and the crew seats during pressurizing the suit in order to determine if the safety and survivability of a crew can be improved by wearing a full pressure suit. For these tests, the DL/H-1 full pressure IVA suit, developed by Pablo de Leon and Gary L. Harris, will be used. These tests use image analysis techniques to determine the displacements. It is expected, as a result of these tests, that wearing a full pressure suit will help to mitigate the impacts and will increase the safety and survivability of a crew during landing since it works as a buffer to mitigate impact forces during splashdown. This work also proposes a future plan for sled test experiments using a sled facility such as the one in use by the Civil Aerospace Medical Institute (CAMI) for experimental validation

Results from Carbon Dioxide Washout Testing Using a Suited Manikin Test Apparatus with a Space Suit Ventilation Test Loop

Science.gov (United States)

Chullen, Cinda; Conger, Bruce; McMillin, Summer; Vonau, Walt; Kanne, Bryan; Korona, Adam; Swickrath, Mike

2016-01-01

NASA is developing an advanced portable life support system (PLSS) to meet the needs of a new NASA advanced space suit. The PLSS is one of the most critical aspects of the space suit providing the necessary oxygen, ventilation, and thermal protection for an astronaut performing a spacewalk. The ventilation subsystem in the PLSS must provide sufficient carbon dioxide (CO2) removal and ensure that the CO2 is washed away from the oronasal region of the astronaut. CO2 washout is a term used to describe the mechanism by which CO2 levels are controlled within the helmet to limit the concentration of CO2 inhaled by the astronaut. Accumulation of CO2 in the helmet or throughout the ventilation loop could cause the suited astronaut to experience hypercapnia (excessive carbon dioxide in the blood). A suited manikin test apparatus (SMTA) integrated with a space suit ventilation test loop was designed, developed, and assembled at NASA in order to experimentally validate adequate CO2 removal throughout the PLSS ventilation subsystem and to quantify CO2 washout performance under various conditions. The test results from this integrated system will be used to validate analytical models and augment human testing. This paper presents the system integration of the PLSS ventilation test loop with the SMTA including the newly developed regenerative Rapid Cycle Amine component used for CO2 removal and tidal breathing capability to emulate the human. The testing and analytical results of the integrated system are presented along with future work.

Eesti Vabariigi 90. aastapäeva tähistamise muljeid / Vello Helk

Index Scriptorium Estoniae

Helk, Vello, 1923-2014

2008-01-01

Eesti Vabariigi juubeliaasta tähistamisest, endiste riigijuhtide mälestuse austamisest. Käsitletud on ka president Toomas Hendrik Ilvese kõnesid kindral Johan Laidoneri mälestusloengul Viimsi mõisas 12. veebruaril 2008, Ajutise Valitsuse liikmete büstide näituse avamisel 14. veebruaril 2008 Eesti Pangas, Eesti Vabariigi väljakuulutamise monumendi avamisel Pärnus 23. veebruaril 2008 ja Eesti Vabariigi väljakuulutamise 90. aastapäeva pidulikul kontsertaktusel 24. veebruaril 2008. Ilmunud ka: Eesti Elu 15. aug. 2008, lk. 5; Eesti Päevaleht (Stockholm) 28. aug. 2008, lk. 3

Weightless environment simulation test; Mujuryo simulation shiken

Energy Technology Data Exchange (ETDEWEB)

Kobayashi, K.; Yamamoto, T.; Kato, F. [Kawasaki Heavy Industries, Ltd., Kobe (Japan)

1997-07-20

Kawasaki Heavy Industries, Ltd., delivered a Weightless Environment Test System (WETS) to National Space Development Agency of Japan in 1994. This system creates a weightless environment similar to that in space by balancing gravity and buoyancy in the water, and is constituted of a large water tank, facilities to supply air and cooling water to space suits worn in the water, etc. In this report, a weightless environment simulation test and the facilities to supply air and cooling water are described. In the weightless environment simulation test, the astronaut to undergo tests and training wears a space suit quite similar to the suit worn on the orbit, and performs EVA/IVA (extravehicular activities/intravehicular activities) around a JEM (Japanese Experimental Module) mockup installed in the water verifying JEM design specifications, preparing manuals for operations on the orbit, or receives basic space-related drill and training. An EVA weightless environment simulation test No. 3 was accomplished with success in January, 1997, when the supply of breathing water and cooling water to the space suit, etc., were carried out with safety and reliability. 2 refs., 8 figs., 2 tabs.

The BRITNeY Suite: A Platfor for Experiments

DEFF Research Database (Denmark)

Westergaard, Michael

2006-01-01

This paper describes a platform, the BRITNeY Suite, for experimenting with Coloured Petri nets. The BRITNeY Suite provides access to data-structures and a simulator for Coloured Petri nets via a powerful scripting language and plug-in-mechanism, thereby making it easy to perform customized...

EDL Sensor Suite, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Optical Air Data Systems (OADS) L.L.C. proposes a LIDAR based remote measurement sensor suite capable of satisfying a significant number of the desired sensing...

Architectural development of an advanced EVA Electronic System

Science.gov (United States)

Lavelle, Joseph

1992-01-01

An advanced electronic system for future EVA missions (including zero gravity, the lunar surface, and the surface of Mars) is under research and development within the Advanced Life Support Division at NASA Ames Research Center. As a first step in the development, an optimum system architecture has been derived from an analysis of the projected requirements for these missions. The open, modular architecture centers around a distributed multiprocessing concept where the major subsystems independently process their own I/O functions and communicate over a common bus. Supervision and coordination of the subsystems is handled by an embedded real-time operating system kernel employing multitasking software techniques. A discussion of how the architecture most efficiently meets the electronic system functional requirements, maximizes flexibility for future development and mission applications, and enhances the reliability and serviceability of the system in these remote, hostile environments is included.

Caracterização das propriedades reológicas e dinâmicas de composições de borracha natural com resíduo de EVA Characterization of rheological and dynamic properties of natural rubber compositions with waste EVA

Directory of Open Access Journals (Sweden)

Marcia G. Oliveira

2004-12-01

Full Text Available O resíduo de EVA oriundo das indústrias calçadistas é um material reticulado, que apresenta grande potencial de uso como carga em composições elastoméricas. Neste trabalho, foram avaliadas as propriedades reológicas e dinâmicas das composições de borracha natural (NR com resíduo de EVA (EVAR, determinadas com o auxílio do analisador de processamento de borracha (RPA. As composições não-vulcanizadas tiveram a sua viscosidade aumentada pela adição de teores crescentes de EVAR. Após a vulcanização essas composições apresentaram menor elasticidade que a NR pura, como evidenciado nas maiores taxas de relaxamento do módulo e nos maiores valores de tan delta. Este comportamento foi confirmado pelos resultados de tensão e alongamento na ruptura.The EVA waste (EVAR is a crosslinked material, which can be used as filler in rubber compositions. In this work, rheological and dynamic properties of natural rubber (NR compositions with EVAR were investigated before and after vulcanization with the help of a rubber processing analyzer (RPA. The filler content varied from 0 to 60 phr. The results showed that rheological properties of nonvulcanized compositions were clearly modified by the addition of EVAR, which contributed to an increase in viscosity. The modulus relaxation and the dynamic properties such as tan delta of vulcanized compositions were also affected, by the reduction of the elasticity of the compositions. The mechanical properties corroborated the behavior revealed by RPA analysis and indicated that EVAR acted as a non-reinforcing filler.

Variable Vector Countermeasure Suit for Space Habitation and Exploration

Data.gov (United States)

National Aeronautics and Space Administration — The "Variable Vector Countermeasure Suit (V2Suit) for Space Habitation and Exploration" is a visionary system concept that will revolutionize space missions by...

NetSuite OneWorld Implementation 2011 R2

CERN Document Server

Foydel, Thomas

2011-01-01

This book is a focused, step-by step tutorial that shows you how to successfully implement NetSuite OneWorld into your organization. It is written in an easy-to-read style, with a strong emphasis on real-world, practical examples with step-by-step explanations. The book focuses on NetSuite OneWorld 2011 R1. If you are an application administrator, business analyst, project team member or business process owner who wants to implement NetSuite OneWorld into your organization, then this book is for you. This book might also be useful if you are a business manager considering a new system for your

Prokofieff: Krieg und Frieden (Sinfonische Suite), Die Verlobung im Kloster (Sommernacht-Suite), Russische Overtüre. Philharmonia Orchestra, Neeme Järvi / G. W.

Index Scriptorium Estoniae

G. W.

1993-01-01

Uuest heliplaadist "Prokofieff: Krieg und Frieden (Sinfonische Suite), Die Verlobung im Kloster (Sommernacht-Suite), Russische Overtüre. Philharmonia Orchestra, Neeme Järvi. (AD: 1991). Chandos/Koch CD 9096

Recommendations for the Implementation of the LASSO Workflow

Energy Technology Data Exchange (ETDEWEB)

Gustafson, William I [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Vogelmann, Andrew M [Brookhaven National Lab. (BNL), Upton, NY (United States); Cheng, Xiaoping [National University of Defense Technology, China; Endo, Satoshi [Brookhaven National Lab. (BNL), Upton, NY (United States); Krishna, Bhargavi [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Li, Zhijin [California Inst. of Technology (CalTech), La Canada Flintridge, CA (United States). Jet Propulsion Lab.; University of California, Los Angeles; Toto, Tami [Brookhaven National Lab. (BNL), Upton, NY (United States); Xiao, Heng [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-11-15

The U. S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Research Fa-cility began a pilot project in May 2015 to design a routine, high-resolution modeling capability to complement ARM’s extensive suite of measurements. This modeling capability, envisioned in the ARM Decadal Vision (U.S. Department of Energy 2014), subsequently has been named the Large-Eddy Simu-lation (LES) ARM Symbiotic Simulation and Observation (LASSO) project, and it has an initial focus of shallow convection at the ARM Southern Great Plains (SGP) atmospheric observatory. This report documents the recommendations resulting from the pilot project to be considered by ARM for imple-mentation into routine operations. During the pilot phase, LASSO has evolved from the initial vision outlined in the pilot project white paper (Gustafson and Vogelmann 2015) to what is recommended in this report. Further details on the overall LASSO project are available at https://www.arm.gov/capabilities/modeling/lasso. Feedback regarding LASSO and the recommendations in this report can be directed to William Gustafson, the project principal investigator (PI), and Andrew Vogelmann, the co-principal investigator (Co-PI), via lasso@arm.gov.

Preparation of EVA/silica nano composites characterized with solid state nuclear magnetic resonance; Obtencao de nanocomposito de EVA/SILICA e caracterizacao por ressonancia magnetica nuclear no estado solido

Energy Technology Data Exchange (ETDEWEB)

Passos, Adriano A; Tavares, Maria I.B.; Neto, Roberto C.P.; Moreira, Leonardo A; Ferreira, Antonio G., E-mail: mibt@ima.ufrj.br [Centro de Tecnologia, Instituto de Macromoleculas Professora Eloisa Mano, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ (Brazil)

2011-07-01

Nano composites of poly(ethylene-co-vinyl acetate)/silica (SiO{sub 2}) with dimensions of ca. 40 nm were prepared via solution intercalation employing chloroform as a solvent. They were mainly characterized with nuclear magnetic resonance spectroscopy (NMR) employing carbon-13 (polymeric matrix), silicon-29 (nanoparticles) and through the determination of the proton spin-lattice relaxation time in the rotating frame (T{sub 1{rho}H}) (polymer matrix). From the NMR results it was inferred that up to 5% of silica in mass a well dispersed nano composite was obtained, owing to a strong interaction between silica and the EVA matrix. (author)

Influences of modified bacterial cellulose nanofibers (BCNs) on structural, thermophysical, optical, and barrier properties of poly ethylene-co-vinyl acetate (EVA) nanocomposite.

Science.gov (United States)

Ghadikolaei, Shila Shirdel; Omrani, Abdollah; Ehsani, Morteza

2018-04-14

The BCNs were chemically modified using acetic anhydride with the aim of improving its dispersion and interfacial adhesion. Acetylation of BCNs was confirmed by FT-IR spectroscopy. Morphology studies using TEM and SEM revealed that a reasonable dispersion of the modified BCNs in the EVA matrix was accomplished. The DSC data displayed a little shift in the T g to higher temperatures with the incorporation of both modified and unmodified BCNs. Increased thermal stability of the nanocomposites consisting acetylated BCNs was confirmed by TGA technique. DMA measurements highlighted that the storage modulus increased and the damping properties decreased for the nanocomposites with regard to the neat EVA. Copyright © 2018 Elsevier B.V. All rights reserved.

Valor Econômico Adicionado (E.V.A.: uma ferramenta para mensuração da real lucratividade de uma operação ou empreendimento

Directory of Open Access Journals (Sweden)

Rodney Wernke

2000-01-01

Full Text Available To follow the changes in the way to administer companies, the accountant must have sufficient knowledge related to the Economic Value Added (EVA. The power of to the Economic Value Added (EVA concept was originated fron the idea that one can not know if an operation is really creating value, taking in to account the opportunit costof all the utilized capital. In most company operations, there is no idea of what or how much the valueaggregated by these companis. KEYWORDS: Economic value added; Measurement

Surmahiirte tants; Pühapäeva hommik; Unistus venna külaskäigust; Kolm päeva voodipuhkust; Veepiir; Ei sugutunnuseid ega muid iseärasusi : [Luuletused] / Wallace Stevens ; inglise k. tlk. ja järelsõna: Andres Ehin

Index Scriptorium Estoniae

Stevens, Wallace

1996-01-01

Autorist lk. 212. Luuletuste 'Unistus venna külaskäigust', 'Kolm päeva voodipuhkust', 'Veepiir' ja 'Ei sugutunnuseid ega muid iseärasusi', mis on samuti ekslikult sealsamas W. Stevensile omistatud, autor on tegelikult Carlos Stewal. Vt. Ehin, Andres. Veavabandus // Looming. 1995. Nr. 5. Lk. 718

Recommendations of the EVA GEC ESTRO Working Group: prescribing, recording, and reporting in endovascular brachytherapy. Quality assurance, equipment, personnel and education

International Nuclear Information System (INIS)

Poetter, Richard; Limbergen, Erik van; Dries, Wim; Popowski, Youri; Coen, Veronique; Fellner, Claudia; Georg, Dietmar; Kirisits, Christian; Levendag, Peter; Marijnissen, Hans; Marsiglia, Hugo; Mazeron, Jean-Jaques; Pokrajac, Boris; Scalliet, Pierre; Tamburini, Vittorio

2001-01-01

Endovascular brachytherapy is a new, rapidly growing field of interest in radiotherapy for the prevention of neointimal hyperplasia after angioplasty in both coronary and peripheral arteries. Many physics aspects of these treatments have already been addressed in the report of the American Association of Physicists in Medicine task group on 'Intravascular brachytherapy', but up to now there are no generally accepted recommendations for recording and reporting radiation doses and volumes. The terminology to be used by all individuals involved in such treatments (radiation oncologists, physicists, and interventionalists) is not clearly defined. The Endovascular Groupe Europeen de Curietherapie/European Society for Therapeutic Radiology and Oncology Working Group in this document presents recommendations for a common language for general use in endovascular brachytherapy. This proposal addresses general terms and concepts for target and dose specification as well as detailed recommendations for dose prescription, recording and reporting in endovascular brachytherapy for both peripheral and coronary arteries. Additionally, quality assurance and radiation safety aspects are briefly addressed, as are aspects related to equipment, personnel, and training and education related to endovascular brachytherapy

Summary of Federal Aviation Administration Responses to National Transportation Safety Board Safety Recommendations.

Science.gov (United States)

1981-01-01

i It: Wo. r (A’I) upr,;cl. ’ Vih t_’o a . hc pre-.ntal, i c ould (1lay a pilot’s t ;f,L..ion to a suit.bl, ba-ckup approach in th- event of radar or...analysis and your recommendation. Since y) ,anigh.ne Bond Admin ist rator 2 Enclosures NATIONAL TRANSPORTATION SAFETY BOARD WASHINGTON, D.C. ISSUED: October

Muusikamaailm : "Musica Nova" Helsingis. Revueltase tähtpäeva-aasta. Pendereckile elutööauhind / Priit Kuusk

Index Scriptorium Estoniae

Kuusk, Priit, 1938-

2000-01-01

Helsingi uue muusika festivalist "Musica Nova" 3.-11. märtsini. Möödus sajand S. Revueltase sünnist, tähtpäeva üritustest USAs. MIDEMi muusikamess Cannes'is andis viiendat korda välja eriauhinna väljapaistvale kaasaja heliloojale ئ seekord K. Pendereckile

Building a biomedical ontology recommender web service

Directory of Open Access Journals (Sweden)

Jonquet Clement

2010-06-01

Full Text Available Abstract Background Researchers in biomedical informatics use ontologies and terminologies to annotate their data in order to facilitate data integration and translational discoveries. As the use of ontologies for annotation of biomedical datasets has risen, a common challenge is to identify ontologies that are best suited to annotating specific datasets. The number and variety of biomedical ontologies is large, and it is cumbersome for a researcher to figure out which ontology to use. Methods We present the Biomedical Ontology Recommender web service. The system uses textual metadata or a set of keywords describing a domain of interest and suggests appropriate ontologies for annotating or representing the data. The service makes a decision based on three criteria. The first one is coverage, or the ontologies that provide most terms covering the input text. The second is connectivity, or the ontologies that are most often mapped to by other ontologies. The final criterion is size, or the number of concepts in the ontologies. The service scores the ontologies as a function of scores of the annotations created using the National Center for Biomedical Ontology (NCBO Annotator web service. We used all the ontologies from the UMLS Metathesaurus and the NCBO BioPortal. Results We compare and contrast our Recommender by an exhaustive functional comparison to previously published efforts. We evaluate and discuss the results of several recommendation heuristics in the context of three real world use cases. The best recommendations heuristics, rated ‘very relevant’ by expert evaluators, are the ones based on coverage and connectivity criteria. The Recommender service (alpha version is available to the community and is embedded into BioPortal.

Morphology, Microstructure and Physico-Mechanical Properties of Pasargad Bitumen, Modified by Ethylene-Vinyl Acetate Copolymer (EVA and Nanoclay

Directory of Open Access Journals (Sweden)

Arezoo Ghaempour

2015-09-01

Full Text Available Due to the characteristics such as flexibility, adhesion, hydrophobicity and low price, bitumen is used in different construction and insulation industries. The major problem with the bitumen material is its restricted physico-mechanical properties, mainly high temperature rutting and low temperature cracking. The aim of this work was to modify bitumen, produced in Tabriz Pasargad Oil Company, and evaluation of its different properties to make it suitable for the weather conditions of North West of Iran. The physico-mechanical, morphological and rheological characteristics of EVA/Cloisite 15A modified bitumen were studied.Two different feeding instructions were used in the mixing of bitumen with modifiers.In the first method, EVA and Cloisite 15A nanoclay were simultaneously added into the molten bitumen and in the second method, EVA and Cloisite 15A were premixed in an internal mixer before adding the polymer/nanoclay nanocomposite into the molten bitumen. The results showed that addition of nanoclay and polymer into the bitumen, led increased softening point and a decrease in the penetration of base bitumen, in which the extent of changes, was higher for the samples prepared by masterbatch method. The rheological properties of the pre-mixed samples exhibited more improvement and these samples showed more elastic behavior. The results of optical microscopy showed that the pre-mixing of polymer and nanoclay led to a more uniform distribution of the swollen polymer phase at the base bitumen. These samples also showed higher morphology stability than those samples prepared in single step. These effects were related to the probable localization of nanoclay at the interface of the two phases.

Using EVA Method to Assess Achievement of BEJ Registered Retail Trade Company

Directory of Open Access Journals (Sweden)

Haryadi Sarjono

2009-03-01

Full Text Available This research aims to evaluate the the achievement in terms of the company finance, on whether it adds value or not to shareholders and investors in generating profit on top of used capital or normally mentioned as the method of EVA. This research was carried out against 10 retail trade companies that registered in BEJ during the finance year of 2005 by using the documentary or secondary data obtained from the Centre of the Pasar Modal Reference (PRPM in the Building of Bursa Efek Jakarta (BEJ. Evaluation results suggested 6 companies for future investment.

Inertial motion capture system for biomechanical analysis in pressure suits

Science.gov (United States)

Di Capua, Massimiliano

A non-invasive system has been developed at the University of Maryland Space System Laboratory with the goal of providing a new capability for quantifying the motion of the human inside a space suit. Based on an array of six microprocessors and eighteen microelectromechanical (MEMS) inertial measurement units (IMUs), the Body Pose Measurement System (BPMS) allows the monitoring of the kinematics of the suit occupant in an unobtrusive, self-contained, lightweight and compact fashion, without requiring any external equipment such as those necessary with modern optical motion capture systems. BPMS measures and stores the accelerations, angular rates and magnetic fields acting upon each IMU, which are mounted on the head, torso, and each segment of each limb. In order to convert the raw data into a more useful form, such as a set of body segment angles quantifying pose and motion, a series of geometrical models and a non-linear complimentary filter were implemented. The first portion of this works focuses on assessing system performance, which was measured by comparing the BPMS filtered data against rigid body angles measured through an external VICON optical motion capture system. This type of system is the industry standard, and is used here for independent measurement of body pose angles. By comparing the two sets of data, performance metrics such as BPMS system operational conditions, accuracy, and drift were evaluated and correlated against VICON data. After the system and models were verified and their capabilities and limitations assessed, a series of pressure suit evaluations were conducted. Three different pressure suits were used to identify the relationship between usable range of motion and internal suit pressure. In addition to addressing range of motion, a series of exploration tasks were also performed, recorded, and analysed in order to identify different motion patterns and trajectories as suit pressure is increased and overall suit mobility is reduced

Analysis of the mechanical resistance and porosity of a composite cement with EVA and reinforced with piacava fibers; Analise da resistencia mecanica e porosidade de um composito cimenticio leve com EVA e reforcado com fibras de piacava

Energy Technology Data Exchange (ETDEWEB)

Silva, R.M.; Dominguez, D.S.; Alvim, R.C.; Iglesias, S.M., E-mail: regilan@hotmail.com [Universidade Estadual de Santa Cruz (UESC), Ilheus, BA (Brazil)

2013-07-01

Nowadays, a lot of solid waste material is discarded into the environment. One of these residues is the EVA (Ethyl Vinyl Acetate) which has the footwear industry, as its main consumer. Studies are focused on the reusing of these materials, particularly in the civil construction, where is used as an aggregate in the production of light mortars. Due to the specific characteristics of lightweight concrete, is necessary to reinforce these materials. The palm Attalea Funifera Martius, known as piacava, may be an excellent alternative as a reinforcement element in light cement mixes. In this work, it's verified the mechanical strength of a composite lightweight cementitious with EVA and reinforced with Piacava fibers, also, the porosity of the new material was measured. To evaluate the mechanical properties of this new material was made mechanical tests and verified the importance of vegetal fibers as the material reinforcing. For the compound porosity evaluation, samples were studied using microcomputer tomography (μTC). With images processing techniques we identify and quantify the pores. The processing digital images through μTC showed up as a non-destructive method for efficient and acceptable results. (author)

Implementing AORN recommended practices for a safe environment of care, part II.

Science.gov (United States)

Kennedy, Lynne

2014-09-01

Construction in and around a working perioperative suite is a challenge beyond merely managing traffic patterns and maintaining the sterile field. The AORN "Recommended practices for a safe environment of care, part II" provides guidance on building design; movement of patients, personnel, supplies, and equipment; environmental controls; safety and security; and control of noise and distractions. Whether the OR suite evolves through construction, reconstruction, or remodeling, a multidisciplinary team of construction experts and health care professionals should create a functional plan and communicate at every stage of the project to maintain a safe environment and achieve a well-designed outcome. Emergency preparedness, a facility-wide security plan, and minimization of noise and distractions in the OR also help enhance the safety of the perioperative environment. Copyright © 2014 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Tallinna vanima reformatsioonijärgse raamatukogu Bibliotheca Revaliensis ad. D. Olai 450. aastapäeva tähistamiseks... / Sirje Lauring

Index Scriptorium Estoniae

Lauring Vaska, Sirje

1998-01-01

16 värvilise postkaardiga komplektist, mille EAR publitseeris Bibliotheca Revaliensis ad. D. Olai 450. aastapäeva tähistamiseks nimg oma raamatuharulduste tutvustamiseks. Postkaardikomplekti aluseks olevatest trükistest on raamatukogu baltikaosakond välja pannud näituse.

Design of Ontology-Based Sharing Mechanism for Web Services Recommendation Learning Environment

Science.gov (United States)

Chen, Hong-Ren

The number of digital learning websites is growing as a result of advances in computer technology and new techniques in web page creation. These sites contain a wide variety of information but may be a source of confusion to learners who fail to find the information they are seeking. This has led to the concept of recommendation services to help learners acquire information and learning resources that suit their requirements. Learning content like this cannot be reused by other digital learning websites. A successful recommendation service that satisfies a certain learner must cooperate with many other digital learning objects so that it can achieve the required relevance. The study proposes using the theory of knowledge construction in ontology to make the sharing and reuse of digital learning resources possible. The learning recommendation system is accompanied by the recommendation of appropriate teaching materials to help learners enhance their learning abilities. A variety of diverse learning components scattered across the Internet can be organized through an ontological process so that learners can use information by storing, sharing, and reusing it.

A Secure Communication Suite for Underwater Acoustic Sensor Networks

Directory of Open Access Journals (Sweden)

Angelica Lo Duca

2012-11-01

Full Text Available In this paper we describe a security suite for Underwater Acoustic Sensor Networks comprising both fixed and mobile nodes. The security suite is composed of a secure routing protocol and a set of cryptographic primitives aimed at protecting the confidentiality and the integrity of underwater communication while taking into account the unique characteristics and constraints of the acoustic channel. By means of experiments and simulations based on real data, we show that the suite is suitable for an underwater networking environment as it introduces limited, and sometimes negligible, communication and power consumption overhead.

Investigation of compression behavior of PE/EVA foam injection molded parts

Science.gov (United States)

Spina, Roberto

2017-10-01

The main objective of the presented work is to evaluate the compression behavior of a polymeric foam blend by using a robust framework for the testing sequence of foaming injection molded parts, with the aim of establishing a standard testing cycle for the evaluation of new matrix material. The research purpose is to assess parameters influencing compression behavior and give useful suggestions for the implementation of a finite element analysis. The polymeric blend consisted of a mixture of low density polyethylenes (LDPEs), a high-density polyethylene (HDPE), an ethylene-vinyl acetate (EVA) and an azodicarbonamide (ADC). The thermal, rheological and compression properties of the blend are fully described, as well as the injection molding process for two specimen types.

Eva Giberti: trayectoria institucional, científica y cívica

Directory of Open Access Journals (Sweden)

Eva Giberti

2006-01-01

Full Text Available Pese a la diversidad de perspectivas abordadas por los autores, este texto ¿que presenta la trayectoria institucional, científica y cívica de Eva Giberti¿ destaca sus hitos y facetas: su actividad académica, su trayectoria integrando diferentes responsabilidades, su labor como clínica, su participación cívica, sus aportes en los medios de comunicación (donde fue la pionera en la divulgación del psicoanálisis y sus publicaciones (entre ellas, las dedicadas a la desmitificación de lo que se supone una familia. Los autores coinciden en una combinación de gratitud, cariño y respeto hacia esta mujer.

Eva Giberti: trayectoria institucional, científica y cívica

Directory of Open Access Journals (Sweden)

Eva Giberti

2006-10-01

Full Text Available Pese a la diversidad de perspectivas abordadas por los autores, este texto –que presenta la trayectoria institucional, científica y cívica de Eva Giberti– destaca sus hitos y facetas: su actividad académica, su trayectoria integrando diferentes responsabilidades, su labor como clínica, su participación cívica, sus aportes en los medios de comunicación (donde fue la pionera en la divulgación del psicoanálisis y sus publicaciones (entre ellas, las dedicadas a la desmitificación de lo que se supone una familia. Los autores coinciden en una combinación de gratitud, cariño y respeto hacia esta mujer.

HPC Benchmark Suite NMx, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Intelligent Automation Inc., (IAI) and University of Central Florida (UCF) propose to develop a comprehensive numerical test suite for benchmarking current and...

Inherent work suit buoyancy distribution: effects on lifejacket self-righting performance.

Science.gov (United States)

Barwood, Martin J; Long, Geoffrey M; Lunt, Heather; Tipton, Michael J

2014-09-01

Accidental immersion in cold water is an occupational risk. Work suits and life jackets (LJ) should work effectively in combination to keep the airway clear of the water (freeboard) and enable self-righting. We hypothesized that inherent buoyancy, in the suit or LJ, would be beneficial for enabling freeboard, but its distribution may influence LJ self-righting. Six participants consented to complete nine immersions. Suits and LJ tested were: flotation suit (FLOAT; 85 N inherent buoyancy); oilskins 1 (OS-1) and 2 (OS-2), both with no inherent buoyancy; LJs (inherent buoyancy/buoyancy after inflation/total buoyancy), LJ-1 50/150/200 N, LJ-2 0/290/290 N, LJ-3 80/190/270 N. Once dressed, the subject entered an immersion pool where uninflated freeboard, self-righting performance, and inflated freeboard were measured. Data were compared using Friedman's test to the 0.05 alpha level. All suits and LJs enabled uninflated and inflated freeboard, but differences were seen between the suits and LJs. Self-righting was achieved on 43 of 54 occasions, irrespective of suit or LJ. On all occasions that self-righting was not achieved, this occurred in an LJ that included inherent buoyancy (11/54 occasions). Of these 11 failures, 8 occurred (73% of occasions) when the FLOAT suit was being worn. LJs that included inherent buoyancy, that are certified as effective on their own, worked less effectively from the perspective of self-righting in combination with a work suit that also included inherent buoyancy. Equipment that is approved for use in the workplace should be tested in combination to ensure adequate performance in an emergency scenario.

Obtenção de nanocompósito de EVA/sílica e caracterização por ressonância magnética nuclear no estado sólido Preparation of EVA/silica nanocomposites characterized with solid state nuclear magnetic resonance

Directory of Open Access Journals (Sweden)

Adriano A. Passos

2011-01-01

Full Text Available Nanocompósitos a base de poli(etileno-co-acetato de vinila (EVA e óxido de sílica (SiO2, com tamanho nanométrico da ordem de 40 nm, foram preparados via intercalação por solução, empregando clorofórmio como solvente. Os nanocompósitos foram caracterizados principalmente pela espectroscopia de ressonância magnética nuclear (RMN, empregando a análise dos núcleos de carbono-13 (matriz polimérica; silício-29 (nanopartícula e pela determinação do tempo de relaxação spin-rede do núcleo de hidrogênio no eixo rotatório (T1rH (matriz polimérica. Pelos dados de RMN foi observado que até cerca de 5% de sílica em massa obteve-se um nanocompósito polimérico com boa dispersão da sílica devido a uma forte interação entre a sílica e matriz de EVA.Nanocomposites of poly(ethylene-co-vinyl acetate/silica (SiO2 with dimensions of ca. 40 nm were prepared via solution intercalation employing chloroform as a solvent. They were mainly characterized with nuclear magnetic resonance spectroscopy (NMR employing carbon-13 (polymeric matrix, silicon-29 (nanoparticles and through the determination of the proton spin-lattice relaxation time in the rotating frame (T1rH (polymer matrix. From the NMR results it was inferred that up to 5% of silica in mass a well dispersed nanocomposite was obtained, owing to a strong interaction between silica and the EVA matrix.

Oracle E-Business Suite Financials R12 A Functionality Guide

CERN Document Server

Iyer, Mohan

2012-01-01

This is a step-by-step functional guide to get you started easily with Oracle EBS Financials. If you are an Oracle E-Business Suite Financial consultant or an administrator looking to get a quick review on the capabilities of Oracle E-Business Suite and improve the use of the systems functionality, then this is the best guide for you. This book assumes that you have a fundamental knowledge of EBS Suite.

Distill: a suite of web servers for the prediction of one-, two- and three-dimensional structural features of proteins

Directory of Open Access Journals (Sweden)

Walsh Ian

2006-09-01

Full Text Available Abstract Background We describe Distill, a suite of servers for the prediction of protein structural features: secondary structure; relative solvent accessibility; contact density; backbone structural motifs; residue contact maps at 6, 8 and 12 Angstrom; coarse protein topology. The servers are based on large-scale ensembles of recursive neural networks and trained on large, up-to-date, non-redundant subsets of the Protein Data Bank. Together with structural feature predictions, Distill includes a server for prediction of Cα traces for short proteins (up to 200 amino acids. Results The servers are state-of-the-art, with secondary structure predicted correctly for nearly 80% of residues (currently the top performance on EVA, 2-class solvent accessibility nearly 80% correct, and contact maps exceeding 50% precision on the top non-diagonal contacts. A preliminary implementation of the predictor of protein Cα traces featured among the top 20 Novel Fold predictors at the last CASP6 experiment as group Distill (ID 0348. The majority of the servers, including the Cα trace predictor, now take into account homology information from the PDB, when available, resulting in greatly improved reliability. Conclusion All predictions are freely available through a simple joint web interface and the results are returned by email. In a single submission the user can send protein sequences for a total of up to 32k residues to all or a selection of the servers. Distill is accessible at the address: http://distill.ucd.ie/distill/.

(ReConstrução Mítica de Eva Perón no Romance Santa Evita (1996 – Tomás Eloy Martínez

Directory of Open Access Journals (Sweden)

Josiane Valcarenghi Ribeiro Nantes

2017-06-01

Full Text Available Eva Perón é um nome significativo na história política da Argentina, sua influência surtiu, e continua surtindo efeito, no povo desse país até os dias atuais. “Evita” foi odiada/amada em níveis extremos, tanto que foi considerada uma santa, um mito para muitas pessoas. Tomás Eloy Martínez escreveu o romance – Santa Evita (1995 – em que narra como viveu a esposa de Juan Domingo Perón. Nesta obra encontra-se muitos elementos que dão indícios da (remitificação de Eva, por isso tenta-se aqui, explorar como se deu a (reconstrução mitológica de Eva Perón, personagem histórica no romance Santa Evita (1996 de Tomás Eloy Martínez, e ainda, expor quais foram os procedimentos adotados pelo autor que (reconstruíram esse mito. Utiliza-se, como base teórica, Linda Hutcheon (1991 e Fleck (2007 no conceito de metaficção historiográfica, Mircea Eliade (1991 e Martín Cezar Feijó (1984 no que cabe à análise do Mito. Esta breve pesquisa se dará a partir da análise bibliográfica e de forma comparativa entre a história e a escrita ficcional do romance Santa Evita (1996 de Tomás Eloy Martínez, discute-se os elementos utilizados e o caminho percorrido para a (reconstrução do mito Eva Perón na obra citada.

HPC Benchmark Suite NMx, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — In the phase II effort, Intelligent Automation Inc., (IAI) and University of Central Florida (UCF) propose to develop a comprehensive numerical test suite for...

The BTeV Software Tutorial Suite

International Nuclear Information System (INIS)

Kutschke, Robert K.

2004-01-01

The BTeV Collaboration is starting to develop its C++ based offline software suite, an integral part of which is a series of tutorials. These tutorials are targeted at a diverse audience, including new graduate students, experienced physicists with little or no C++ experience, those with just enough C++ to be dangerous, and experts who need only an overview of the available tools. The tutorials must both teach C++ in general and the BTeV specific tools in particular. Finally, they must teach physicists how to find and use the detailed documentation. This report will review the status of the BTeV experiment, give an overview of the plans for and the state of the software and will then describe the plans for the tutorial suite

The antigravity suit in neurosurgery. Cardiovascular responses in seated neurosurgical patients.

Science.gov (United States)

Brodrick, P M; Ingram, G S

1988-09-01

The haemodynamic responses associated with inflation of the antigravity suit (G suit, aviation type) to 8.0 kPa were studied in a series of 40 patients who underwent neurosurgical operations in the sitting position. The study showed statistically significant increases in systolic arterial pressure (p less than 0.005) and mean central venous pressure (p less than 0.001) with inflation of the suit. The systolic arterial and mean central venous pressures remained significantly elevated immediately before deflation of the suit at the end of the operation (p less than 0.001 and p less than 0.005 respectively). The addition of 0.8-1.0 kPa positive end expiratory pressure during suit inflation was also investigated. A further increase in central venous pressure occurred but this did not achieve statistical significance.

ESTUDIO cycEVA: CASOS Y CONTROLES PARA LA ESTIMACIÓN DE LA EFECTIVIDAD DE LA VACUNA ANTIGRIPAL EN ESPAÑA, 2008-2013

Directory of Open Access Journals (Sweden)

Silvia Jiménez-Jorge

2014-01-01

Full Text Available Fundamentos: Desde 2008-09 la efectividad de la vacuna (EV antigripal en España se estima con el estudio de casos y controles para la evaluación de la EV antigripal (cycEVA, componente español de la red europea (Influenza-Monitoring Vaccine Effectiveness (I-MOVE. El objetivo es describir la evolución del estudio cycEVA durante las cinco temporadas del período 2008/09– 2012/13. Métodos: Se analizaron los siguientes indicadores: 1 participación de los médicos/pediatras centinela (MP; 2 población y periodo de estudio, 3 calidad de los datos y 4 difusión de los resultados mediantes publicaciones. Se calculó el porcentaje anual de cambio constante de los indicadores analizándose su tendencia mediante el test de Cochran-Armitage. Resultados: El número de MP participantes aumentó de 164 en 2008-09 hasta 246 en ediciones posteriores. El porcentaje de médicos que reclutaron al menos un paciente experimentó un cambio anual significativo (PCA del 15,33%. El porcentaje de pacientes reclutados incluidos en el análisis aumen- tó del 77% en 2008-09 a más del 95% en las siguientes ediciones (PCA=5,91%. El porcentaje de casos y controles participantes en cycEVA sobre el total de pacientes que contribuyeron al estudio europeo I-MOVE osciló entre el 23% en la edición piloto y 30% en la temporada 2011-12. Los resultados finales se difundieron en revistas científicas con un factor de impacto situado en el cuartil 2 y en 2010-11 y 2011-12 se publicaron resultados preliminares en revistas con un factor de impacto situado en el cuartil 1 (97 citas. Conclusiones: La experiencia del estudio cycEVA se reflejó en una mejora en la oportunidad e impacto de sus resultados, cruciales para orientar las recomendaciones anuales de vacunación antigripal.

Los homenajes a Eva Perón como prácticas de memoria en tiempos de la Resistencia peronista (1955-1963

Directory of Open Access Journals (Sweden)

Anabella Evangelina Gorza

2016-04-01

Full Text Available El objetivo de este artículo apunta a visualizar los homenajes efectuados en memoria de Eva Perón como instancias de participación en la Resistencia peronista (1955-1963, a partir del análisis de fuentes periodísticas, informes de inteligencia y entrevistas. La observación de este tipo de prácticas nos ha permitido analizar cómo se realizó el proceso de construcción de memoria durante esta etapa y sus anclajes materiales, el carácter religioso que impregnó a dichas prácticas, y cómo la imagen de Eva Perón se constituyó en una instancia de legitimación para la participación política femenina, aunque fueron atributos conservadores los que habilitaron dicha participación.

EVA: Exome Variation Analyzer, an efficient and versatile tool for filtering strategies in medical genomics

Directory of Open Access Journals (Sweden)

Coutant Sophie

2012-09-01

Full Text Available Abstract Background Whole exome sequencing (WES has become the strategy of choice to identify a coding allelic variant for a rare human monogenic disorder. This approach is a revolution in medical genetics history, impacting both fundamental research, and diagnostic methods leading to personalized medicine. A plethora of efficient algorithms has been developed to ensure the variant discovery. They generally lead to ~20,000 variations that have to be narrow down to find the potential pathogenic allelic variant(s and the affected gene(s. For this purpose, commonly adopted procedures which implicate various filtering strategies have emerged: exclusion of common variations, type of the allelics variants, pathogenicity effect prediction, modes of inheritance and multiple individuals for exome comparison. To deal with the expansion of WES in medical genomics individual laboratories, new convivial and versatile software tools have to implement these filtering steps. Non-programmer biologists have to be autonomous combining themselves different filtering criteria and conduct a personal strategy depending on their assumptions and study design. Results We describe EVA (Exome Variation Analyzer, a user-friendly web-interfaced software dedicated to the filtering strategies for medical WES. Thanks to different modules, EVA (i integrates and stores annotated exome variation data as strictly confidential to the project owner, (ii allows to combine the main filters dealing with common variations, molecular types, inheritance mode and multiple samples, (iii offers the browsing of annotated data and filtered results in various interactive tables, graphical visualizations and statistical charts, (iv and finally offers export files and cross-links to external useful databases and softwares for further prioritization of the small subset of sorted candidate variations and genes. We report a demonstrative case study that allowed to identify a new candidate gene

The Power of Love: Rewriting the Romance in Isabel Allende's The House of the Spirits and Eva Luna

Directory of Open Access Journals (Sweden)

Frances Jane P. Abao

2000-12-01

Full Text Available Despite its ongoing popularity with women readers, romantic fiction has traditionally been regarded as an instrument of women's oppression, largely due to its reinforcement and even glorification of sexual stereotypes and bourgeois values. Latin American writer Isabel Allende's novels The House of the Spirits and Eva Luna both contain a number of the elements and conventions of romantic fiction, including distinct similarities to the two acknowledged foundations of this genre: Charlotte Brontë's Jane Eyre and Emily Brontë's Wuthering Heights.However, The House of the Spirits and Eva Luna can also be read as rewritings of the genre of romantic fiction. In these two texts, Isabel Allende appropriates and then reworks certain conventions of romantic fiction in order to portray her notion of "fulfilling egalitarian relationships" between men and women. Nevertheless, despite these feminist revisions, Allende's rewritten romances do retain the "wish-fulfillment" element-or ideal-of romantic fiction, its depiction of women's fantasy of feminine values being appreciated and validated within heterosexual romantic relationships in the real world.

PENGARUH MANAJEMEN ASET, MANAJEMEN LIABILITI, MANAJEMEN ASET LIABILITI TERHADAP ECONOMIC VALUE ADDED (EVA PADA PERBANKAN KONVENSIONAL YANG TERDAFTAR DI BURSA EFEK INDONESIA

Directory of Open Access Journals (Sweden)

H Hamidah

2013-08-01

Full Text Available Generally, company wants to optimize its profit. Properly manage the asset management, liability management and asset liability management can provide value added profits for the company. A sample of research consists of 18 banking companies listed at Indonesia Stock Exchange (IDX during the 2005-2009. This research investigate the relationship net loans/total earning assets (NLA, non performing loan (NPL, liabilities/total assets (LA, equity/total assets (EA, net interest margin (NIM, loan to deposite ratio (LDR on economic value added (EVA. The research use regression of panel data. The result show that net loans/total earning assets (NLA, liabilities/total assets (LA, equity/total assets (EA, net interest margin (NIM, loan to deposite ratio (LDR are have significant effect on economic value added (EVA but non performing loan (NPL.

Extending the GI Brokering Suite to Support New Interoperability Specifications

Science.gov (United States)

Boldrini, E.; Papeschi, F.; Santoro, M.; Nativi, S.

2014-12-01

The GI brokering suite provides the discovery, access, and semantic Brokers (i.e. GI-cat, GI-axe, GI-sem) that empower a Brokering framework for multi-disciplinary and multi-organizational interoperability. GI suite has been successfully deployed in the framework of several programmes and initiatives, such as European Union funded projects, NSF BCube, and the intergovernmental coordinated effort Global Earth Observation System of Systems (GEOSS). Each GI suite Broker facilitates interoperability for a particular functionality (i.e. discovery, access, semantic extension) among a set of brokered resources published by autonomous providers (e.g. data repositories, web services, semantic assets) and a set of heterogeneous consumers (e.g. client applications, portals, apps). A wide set of data models, encoding formats, and service protocols are already supported by the GI suite, such as the ones defined by international standardizing organizations like OGC and ISO (e.g. WxS, CSW, SWE, GML, netCDF) and by Community specifications (e.g. THREDDS, OpenSearch, OPeNDAP, ESRI APIs). Using GI suite, resources published by a particular Community or organization through their specific technology (e.g. OPeNDAP/netCDF) can be transparently discovered, accessed, and used by different Communities utilizing their preferred tools (e.g. a GIS visualizing WMS layers). Since Information Technology is a moving target, new standards and technologies continuously emerge and are adopted in the Earth Science context too. Therefore, GI Brokering suite was conceived to be flexible and accommodate new interoperability protocols and data models. For example, GI suite has recently added support to well-used specifications, introduced to implement Linked data, Semantic Web and precise community needs. Amongst the others, they included: DCAT: a RDF vocabulary designed to facilitate interoperability between Web data catalogs. CKAN: a data management system for data distribution, particularly used by

ANALYSIS OF DESIGN ELEMENTS IN SKI SUITS

Directory of Open Access Journals (Sweden)

Birsen Çileroğlu

2014-06-01

Full Text Available Popularity of Ski Sport in 19th century necessitated a new perspective on protective skiing clothing ag ainst the mountain climates and excessive cold. Winter clothing were the basis of ski attire during this period. By the beginning of 20th century lining cloth were used to minimize the wind effect. The difference between the men and women’s ski attire of the time consisted of a knee - length skirts worn over the golf trousers. Subsequent to the First World War, skiing suit models were influenced by the period uniforms and the producers reflected the fashion trends to the ski clothing. In conformance with th e prevailing trends, ski trousers were designed and produced for the women thus leading to reduction in gender differences. Increases in the ski tourism and holding of the first winter olympics in 1924 resulted in variations in ski attires, development of design characteristics, growth in user numbers, and enlargement of production capacities. Designers emphasized in their collections combined presence of elegance and practicality in the skiing attire. In 1930s, the ski suits influenced by pilots’ uniforms included characteristics permitting freedom of motion, and the design elements exhibited changes in terms of style, material and aerodynamics. In time, the ski attires showed varying design features distinguishing professionals from the amateurs. While protective functionality was primary consideration for the amateurs, for professionals the aerodynamic design was also a leading factor. Eventually, the increased differences in design characteristics were exhibited in ski suit collections, World reknown brands were formed, production and sales volumes showed significant rise. During 20th century the ski suits influenced by fashion trends to acquire unique styles reached a position of dominance to impact current fashion trends, and apart from sports attir es they became a style determinant in the clothing of cold climates. Ski suits

Exercise recommendations in patients with newly diagnosed fibromyalgia.

Science.gov (United States)

Wilson, Brad; Spencer, Horace; Kortebein, Patrick

2012-04-01

To evaluate exercise recommendations in patients newly diagnosed with fibromyalgia. A retrospective chart review. A public university rheumatology clinic. Patients newly diagnosed with fibromyalgia (N = 122). Frequency and type of exercise recommendations. The mean (standard deviation) age of these patients with fibromyalgia was 45 ± 12 years; 91% were women. Exercise was recommended as part of the documented treatment plan in 47% of these patients (57/122); only 3 patients had a documented contraindication for exercise. Aquatic exercise was most frequently recommended (56% [32/57]), followed by combined aquatic-aerobic exercise (26% [15/57]), and, infrequently, aerobic exercise only (5% [3/57]); only 7% of these patients (4/57) were referred for physical therapy. The primary method of communication was verbal discussion (94% [54/57]). Although there is well-documented evidence that exercise is beneficial for patients with fibromyalgia, we found that less than half of patients with newly diagnosed fibromyalgia in our study were provided recommendations to initiate an exercise program as part of their treatment plan. Further investigation of these findings are warranted, including evaluation of other university and community rheumatology practices as well as that of other physicians caring for patients with fibromyalgia. However, our findings indicate that there appears to be an opportunity to provide more specific and practical education regarding the implementation of an exercise regimen for patients with newly diagnosed fibromyalgia. Physiatrists may be particularly well suited to manage the exercise component of patients with fibromyalgia because of their specialized training in exercise prescription. Copyright © 2012 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.

Strauss: Der Rosenkavalier - Suite / Michael Kennedy

Index Scriptorium Estoniae

Kennedy, Michael

1990-01-01

Uuest heliplaadist "Strauss: Der Rosenkavalier - Suite, Salome-Dance of the seven veils, Capriccio-Prelude, Intermezzo, Morgen Mittag um elf! Felicity Lott, Scottish National Orchestra, Neeme Järvi" Chandos ABRD 1397. ABTD 1397. CHAN 8758

The Los Alamos suite of relativistic atomic physics codes

International Nuclear Information System (INIS)

Fontes, C J; Zhang, H L; Jr, J Abdallah; Clark, R E H; Kilcrease, D P; Colgan, J; Cunningham, R T; Hakel, P; Magee, N H; Sherrill, M E

2015-01-01

The Los Alamos suite of relativistic atomic physics codes is a robust, mature platform that has been used to model highly charged ions in a variety of ways. The suite includes capabilities for calculating data related to fundamental atomic structure, as well as the processes of photoexcitation, electron-impact excitation and ionization, photoionization and autoionization within a consistent framework. These data can be of a basic nature, such as cross sections and collision strengths, which are useful in making predictions that can be compared with experiments to test fundamental theories of highly charged ions, such as quantum electrodynamics. The suite can also be used to generate detailed models of energy levels and rate coefficients, and to apply them in the collisional-radiative modeling of plasmas over a wide range of conditions. Such modeling is useful, for example, in the interpretation of spectra generated by a variety of plasmas. In this work, we provide a brief overview of the capabilities within the Los Alamos relativistic suite along with some examples of its application to the modeling of highly charged ions. (paper)

Personalized Popular Blog Recommender Service for Mobile Applications

Science.gov (United States)

Tsai, Pei-Yun; Liu, Duen-Ren

Weblogs have emerged as a new communication and publication medium on the Internet for diffusing the latest useful information. Providing value-added mobile services such as blog articles is increasingly important to attract mobile users to mobile commerce. There are, however, a tremendous number of blog articles, and mobile users generally have difficulty in browsing weblogs. Accordingly, providing mobile users with blog articles that suit their interests is an important issue. Very little research, however, focuses on this issue. In this work, we propose a Customized Content Service on a mobile device (m-CCS) to filter and push blog articles to mobile users. The m-CCS can predict the latest popular blog topics by forecasting the trend of time-sensitive popularity of weblogs. Furthermore, to meet the diversified interest of mobile users, m-CCS further analyzes users’ browsing logs to derive their interests, which are then used to recommend their preferred popular blog topics and articles. The prototype system of m-CCS demonstrates that the system can effectively recommend mobile users desirable blog articles with respect to both popularity and personal interests.

Space Suit Performance: Methods for Changing the Quality of Quantitative Data

Science.gov (United States)

Cowley, Matthew; Benson, Elizabeth; Rajulu, Sudhakar

2014-01-01

NASA is currently designing a new space suit capable of working in deep space and on Mars. Designing a suit is very difficult and often requires trade-offs between performance, cost, mass, and system complexity. To verify that new suits will enable astronauts to perform to their maximum capacity, prototype suits must be built and tested with human subjects. However, engineers and flight surgeons often have difficulty understanding and applying traditional representations of human data without training. To overcome these challenges, NASA is developing modern simulation and analysis techniques that focus on 3D visualization. Early understanding of actual performance early on in the design cycle is extremely advantageous to increase performance capabilities, reduce the risk of injury, and reduce costs. The primary objective of this project was to test modern simulation and analysis techniques for evaluating the performance of a human operating in extra-vehicular space suits.

An improved air-supplied plastic suit for protection against tritium

International Nuclear Information System (INIS)

Wiernicki, C.

1987-01-01

A newly developed Saran/CPE plastic suit material is described which offers significantly better protection against HTO penetration and permeation than the 12-mil PVC currently used at SRP and most other DOE and commercial sites where tritium and HTO are exposure hazards. Tritium breakthrough time is an important parameter when evaluating the applicability of protective clothing; previously published tritium permeation tests did not measure this parameter. Future studies should quantify steady-state permeation rate and breakthrough time to more fully evaluate potential tritium protective clothing. Saran/CPE has successfully been fabricated into a plastic suit because, in addition to its superior tritium resistance, it has all the characteristics required to construct a rugged, dependable, and comfortable suit. The use of the Saran/CPE suit at SRP reactor and tritium production facilities should be a major contribution to the site As Low As Reasonably Achievable program. Both Saran/CPE have demonstrated excellent resistance to a wide range of chemical contaminants; therefore, this suit material may have applications in the general chemical industry and hazardous waste site cleanup operations. 4 refs., 3 figs., 1 tab

Philosophies Applied in the Selection of Space Suit Joint Range of Motion Requirements

Science.gov (United States)

Aitchison, Lindsway; Ross, Amy; Matty, Jennifer

2009-01-01

Space suits are the most important tool for astronauts working in harsh space and planetary environments; suits keep crewmembers alive and allow them to perform exploration, construction, and scientific tasks on a routine basis over a period of several months. The efficiency with which the tasks are performed is largely dictated by the mobility features of the space suit. For previous space suit development programs, the mobility requirements were written as pure functional mobility requirements that did not separate joint ranges of motion from the joint torques. The Constellation Space Suit Element has the goal to make more quantitative mobility requirements that focused on the individual components of mobility to enable future suit designers to build and test systems more effectively. This paper details the test planning and selection process for the Constellation space suit pressure garment range of motion requirements.

Processing of nanocomposites EVA/PVC/MMT in twin-screw extruder

International Nuclear Information System (INIS)

Gehlen, A.; Barbutti Filho, W.R.; Francisquetti, E.L.; Andrade, M.Z.; Zattera, A.J.

2010-01-01

Polymeric nanocomposites have some superior properties when compared to conventional polymer composites and is one of the most promising fields in the nanotechnology research. In a EVA (ethylene vinyl acetate) /PVC (poly vinyl chloride) matrix was incorporated different types of montmorillonite clays (an inorganic (Na + ) and two organic modified (15A and 30B nanoclays). The mixtures were processed in a co-rotating twin-screw extruder at processing speeds of 200 and 400 rpm. Thermogravimetric analysis (TGA) shown that the inorganic and organic modified clays promoted a shift to higher temperatures in the degradation temperature., X-ray diffraction (XRD) and transmission electronic microscopy (TEM) shows a possible intercalation with the 15A clay, exfoliation with the 30B clay and formation of clusters in the Na + clay. For all clays studied, the increase in shear rate does not promote significant changes. (author)

The Role of KREEP in the Production of Mg-Suite Magmas and Its Influence on the Extent of Mg-Suite Magmatism in the Lunar Crust

Science.gov (United States)

Elardo, S. M.; Shearer, C. K.; McCubbin, F. M.

2017-01-01

The lunar magnesian-suite, or Mg-suite, is a series of ancient plutonic rocks from the lunar crust. They have received a considerable amount of attention from lunar scientists since their discovery for three primary reasons: 1) their ages and geochemistry indicate they represent pristine magmatic samples that crystallized very soon after the formation of the Moon; 2) their ages often overlap with ages of the ferroan anorthosite (FAN) crust; and 3) planetary-scale processes are needed in formation models to account for their unique geochemical features. Taken as a whole, the Mg-suite samples, as magmatic cumulate rocks, approximate a fractional crystallization sequence in the low-pressure forsterite-anorthite-silica system, and thus these samples are generally thought to be derived from layered mafic intrusions which crystallized very slowly from magmas that intruded the anorthositic crust. However, no direct linkages have been established between different Mg-suite samples based either on field relationships or geochemistry.The model for the origin of the Mg-suite, which best fits the limited available data, is one where Mg-suite magmas form from melting of a hybrid cumulate package consisting of deep mantle dunite, crustal anorthosite, and KREEP (potassium-rare earth elements-phosphorus) at the base of the crust under the Procellarum KREEP Terrane (PKT). In this model, these three LMO (Lunar Magma Ocean) cumulate components are brought into close proximity by the cumulate overturn process. Deep mantle dunitic cumulates with an Mg number of approximately 90 rise to the base of the anorthositic crust due to their buoyancy relative to colder, more dense Fe- and Ti-rich cumulates. This hybridized source rock melts to form Mg-suite magmas, saturated in Mg-rich olivine and anorthitic plagioclase, that have a substantial KREEP component.

The Use of Nanomaterials to Achieve NASA's Exploration Program Power Goals

Science.gov (United States)

Jeevarajan, J.

2009-01-01

This slide presentation reviews the power requirements for the space exploration and the lunar surface mobility programs. It includes information about the specifications for high energy batteries and the power requirements for lunar rovers, lunar outposts, lunar ascent module, and the lunar EVA suit.

Corrections of the NIST Statistical Test Suite for Randomness

OpenAIRE

Kim, Song-Ju; Umeno, Ken; Hasegawa, Akio

2004-01-01

It is well known that the NIST statistical test suite was used for the evaluation of AES candidate algorithms. We have found that the test setting of Discrete Fourier Transform test and Lempel-Ziv test of this test suite are wrong. We give four corrections of mistakes in the test settings. This suggests that re-evaluation of the test results should be needed.

Advanced Reservoir Characterization and Development through High-Resolution 3C3D Seismic and Horizontal Drilling: Eva South Marrow Sand Unit, Texas County, Oklahoma

Energy Technology Data Exchange (ETDEWEB)

Wheeler,David M.; Miller, William A.; Wilson, Travis C.

2002-03-11

The Eva South Morrow Sand Unit is located in western Texas County, Oklahoma. The field produces from an upper Morrow sandstone, termed the Eva sandstone, deposited in a transgressive valley-fill sequence. The field is defined as a combination structural stratigraphic trap; the reservoir lies in a convex up -dip bend in the valley and is truncated on the west side by the Teepee Creek fault. Although the field has been a successful waterflood since 1993, reservoir heterogeneity and compartmentalization has impeded overall sweep efficiency. A 4.25 square mile high-resolution, three component three-dimensional (3C3D) seismic survey was acquired in order to improve reservoir characterization and pinpoint the optimal location of a new horizontal producing well, the ESU 13-H.

Reliability performance testing of totally encapsulating chemical protective suits

International Nuclear Information System (INIS)

Johnson, J.S.; Swearengen, P.M.

1991-01-01

The need to assure a high degree of reliability for totally encapsulating chemical protective (TECP) suits has been recognized by Lawrence Livermore National Laboratory's (LLNL) Hazards Control Department for some time. The following four tests were proposed as necessary to provide complete evaluation of TECP suit performance: 1. Quantitative leak test (ASTM draft), 2. Worst-case chemical exposure test (conceptual), 3. Pressure leak-rate test (complete, ASTM F1057-87), and 4. Chemical leak-rate test (ASTM draft). This paper reports on these tests which should be applied to measuring TECP suit performance in two stages: design qualification tests and field use tests. Test 1, 2, and 3 are used as design qualification tests, and tests 3 and 4 are used as field use tests

STS-49 ASEM activities illustrated with PLAID computer graphics

Science.gov (United States)

1992-01-01

STS-49 Endeavour, Orbiter Vehicle (OV) 105, Assembly of Station by Extravehicular Activity (EVA) Methods (ASEM) activities are illustrated with PLAID computer graphics. Two extravehicular mobility unit (EMU) suited crewmembers work on multipurpose experiment support structure (MPESS) (with legs attached) grappled by remote manipulator system (RMS) end effector and positioned in the over-the-nose location (above OV-105's crew compartment). This position has been designated as the assembly area for Space Station Freedom (SSF). This procedure will evaluate the ability to use the RMS to position MPESS carrier and EVA crewmembers forward and above the PLB.

Simulation and preparation of surface EVA in reduced gravity at the Marseilles Bay subsea analogue sites

Science.gov (United States)

Weiss, P.; Gardette, B.; Chirié, B.; Collina-Girard, J.; Delauze, H. G.

2012-12-01

Extravehicular activity (EVA) of astronauts during space missions is simulated nowadays underwater in neutral buoyancy facilities. Certain aspects of weightlessness can be reproduced underwater by adding buoyancy to a diver-astronaut, therefore exposing the subject to the difficulties of working without gravity. Such tests were done at the COMEX' test pool in Marseilles in the 1980s to train for a French-Russian mission to the MIR station, for the development of the European HERMES shuttle and the COLUMBUS laboratory. However, space agencies are currently studying missions to other destinations than the International Space Station in orbit, such as the return to the Moon, NEO (near-Earth objects) or Mars. All these objects expose different gravities: Moon has one sixth of Earth's gravity, Mars has a third of Earth's gravity and asteroids have virtually no surface gravity; the astronaut "floats" above the ground. The preparation of such missions calls for a new concept in neutral buoyancy training, not on man-made structures, but on natural terrain, underwater, to simulate EVA operations such as sampling, locomotion or even anchoring in low gravity. Underwater sites can be used not only to simulate the reduced gravity that astronauts will experience during their field trips, also human factors like stress are more realistically reproduced in such environment. The Bay of Marseille hosts several underwater sites that can be used to simulate various geologic morphologies, such as sink-holes which can be used to simulate astronaut descends into craters, caves where explorations of lava tubes can be trained or monolithic rock structures that can be used to test anchoring devices (e.g., near Earth objects). Marseilles with its aerospace and maritime/offshore heritage hosts the necessary logistics and expertise that is needed to perform such simulations underwater in a safe manner (training of astronaut-divers in local test pools, research vessels, subsea robots and

The Apollo Number: space suits, self-support, and the walk-run transition.

Directory of Open Access Journals (Sweden)

Christopher E Carr

Full Text Available BACKGROUND: How space suits affect the preferred walk-run transition is an open question with relevance to human biomechanics and planetary extravehicular activity. Walking and running energetics differ; in reduced gravity (<0.5 g, running, unlike on Earth, uses less energy per distance than walking. METHODOLOGY/PRINCIPAL FINDINGS: The walk-run transition (denoted * correlates with the Froude Number (Fr = v(2/gL, velocity v, gravitational acceleration g, leg length L. Human unsuited Fr* is relatively constant (approximately 0.5 with gravity but increases substantially with decreasing gravity below approximately 0.4 g, rising to 0.9 in 1/6 g; space suits appear to lower Fr*. Because of pressure forces, space suits partially (1 g or completely (lunar-g support their own weight. We define the Apollo Number (Ap = Fr/M as an expected invariant of locomotion under manipulations of M, the ratio of human-supported to total transported mass. We hypothesize that for lunar suited conditions Ap* but not Fr* will be near 0.9, because the Apollo Number captures the effect of space suit self-support. We used the Apollo Lunar Surface Journal and other sources to identify 38 gait events during lunar exploration for which we could determine gait type (walk/lope/run and calculate Ap. We estimated the binary transition between walk/lope (0 and run (1, yielding Fr* (0.36+/-0.11, mean+/-95% CI and Ap* (0.68+/-0.20. CONCLUSIONS/SIGNIFICANCE: The Apollo Number explains 60% of the difference between suited and unsuited Fr*, appears to capture in large part the effects of space suits on the walk-run transition, and provides several testable predictions for space suit locomotion and, of increasing relevance here on Earth, exoskeleton locomotion. The knowledge of how space suits affect gait transitions can be used to optimize space suits for use on the Moon and Mars.

Virtual reality simulation training in a high-fidelity procedure suite

DEFF Research Database (Denmark)

Lönn, Lars; Edmond, John J; Marco, Jean

2012-01-01

To assess the face and content validity of a novel, full physics, full procedural, virtual reality simulation housed in a hybrid procedure suite.......To assess the face and content validity of a novel, full physics, full procedural, virtual reality simulation housed in a hybrid procedure suite....

Corporation suit in administrative proceedings - BVerwG, NJW 1981, 362

International Nuclear Information System (INIS)

Skouris, W.

1982-01-01

The above mentioned decisions show that the repeated demand for an admission of the corporation suit has not had much impact on jurisdiction. Still the courts are examining whether the rights of corporations taking action against the executive measures are being infringed by them or not. They do not seem to be willing to admit the enforcement of members' rights or of public interests by means of a corporation suit except in those cases that are already embodied in the law. The latest statement of the administrative courts prove that the administrative procedural law (still) in force does not accept any general law on the conduct of a case on behalf of associations for the protection of their members' rights (egoistic corporation suit), nor does it acknowledge the legitimacy of corporations to see against objective illegalities in official decisions with the intention of reducing deficiencies in the execution (altruistic corporation suit). (orig.) [de

FRHAM-TEX trademark cool suit - OST reference No. 1854. Deactivation and decommissioning focus area

International Nuclear Information System (INIS)

1998-02-01

This paper describes a demonstration project for the FRHAM-TEX Cool Suit trademark manufactured by FRHAM Safety Products. It is a one-piece, disposable, breathable, waterproof coverall designed to permit moisture generated by the wearer to be transmitted outside the suit. The performance of this suit was compared to a Tyvek reg-sign suit as a baseline. The suit is proposed as safety ware for workers at decontamination and decommissioning projects

Analysis of the mechanical resistance and porosity of a composite cement with EVA and reinforced with piacava fibers

International Nuclear Information System (INIS)

Silva, R.M.; Dominguez, D.S.; Alvim, R.C.; Iglesias, S.M.

2013-01-01

Nowadays, a lot of solid waste material is discarded into the environment. One of these residues is the EVA (Ethyl Vinyl Acetate) which has the footwear industry, as its main consumer. Studies are focused on the reusing of these materials, particularly in the civil construction, where is used as an aggregate in the production of light mortars. Due to the specific characteristics of lightweight concrete, is necessary to reinforce these materials. The palm Attalea Funifera Martius, known as piacava, may be an excellent alternative as a reinforcement element in light cement mixes. In this work, it's verified the mechanical strength of a composite lightweight cementitious with EVA and reinforced with Piacava fibers, also, the porosity of the new material was measured. To evaluate the mechanical properties of this new material was made mechanical tests and verified the importance of vegetal fibers as the material reinforcing. For the compound porosity evaluation, samples were studied using microcomputer tomography (μTC). With images processing techniques we identify and quantify the pores. The processing digital images through μTC showed up as a non-destructive method for efficient and acceptable results. (author)

Galerkin CFD solvers for use in a multi-disciplinary suite for modeling advanced flight vehicles

Science.gov (United States)

Moffitt, Nicholas J.

application of the suite. The current models are accurate at low supersonic speed and reasonable for engineering approximation at hypersonic speeds. Improvements to extend the models fully into the hypersonic regime are given in the Recommendations section.

A Study of elasto ferrite based on ethyl vinyl acetate (EVA) and elastomer thermoplastic (ETP) and its mechanical, microstructure and magnetic characterizations

International Nuclear Information System (INIS)

Sudirman; Ridwan; Mujamilah; Budiman, Silviani; Eka Putri, Febriyanti

2002-01-01

In industrial application, the magnetic properties of the magnetic composites do not have to be too high In China. the omset of composite bascd on hcxafcrritc (US S 52 million) is higer than thc compositc based on NdFeB (US S 13.5 million The use of polymcr as binder in magnctic compositcs gives matcrials with cxccllcnt properties such as light, flexible and cheap Thc elasticity of the magnetic composites depends on the properties of the polymer matrix used in the materials. When hexafemtc powder is binded with an elastic polymer. elastoferrite is obtained In this study, hexaferrite SrO.6Fe 2 O 3 (SrM) and BaO.6Fe 2 O 3 (BaM) which was calsinated at 1200 o was used with EV A/ETP as binder These two materials were mixed in Labo Palstomill at 130 o C for 7 minutcs with rotation speed of 30 rpm The volume fraction of the hexafcmtc powder was varrlcd (30. 40 and 50%). The mixture was pressed to obtaIn sheets. The sheets were characterization to obtain: mechanical, magnetlcal and microstructure properties. The particle size and shape of SrM and BaM podwer were measured with SEM. The particle size of SrM and BaM are 1.6 um and I.2 um respectively The SrM shape is flaky and the BaM shape is nodular Mechanical properties of the composite based on EVA is better than that based on ETP At 30% volume faction. the tensile strength of EVA composite is 44.(,8 kg/cm 3 while the ETP composite is 19.72 kg/cm 3 The magnetic properties of both composites (EVA and ETP) were charactcrized. The result show that for EVA composites, the lowest energy value was 0.0400 MGOe (30% BaM volume fractIon) and the highest energy value was 0.21860 MGOe (50% SrM volume fraction). For ETP composites, the lowest energy value 0.0242 MGOe (30% SrM volume fractIon) and the hghest energy value was 02262 MGOe (40% BaM volume fraction)

Sistema E.V.A. 1.0

Directory of Open Access Journals (Sweden)

Díaz Córdova, D. M.

2003-01-01

Full Text Available Dentro del campo del crecimiento y desarrollo, el cálculo antropométrico, es una de las herramientas más utilizadas para encontrar indicadores válidos del estado general del crecimiento biológico de una población en su interacción con los diversos factores sociales. Frente al evidente proceso de pauperización por el que viene transcurriendo el país, la evaluación del estado nutricional de la población infantil, tanto en sus aspectos poblacionales como individuales, se hace necesaria y cotidiana. Presentamos aquí un software de escritorio que permite el cálculo y la graficación de las principales variables antropométricas. El E.V.A. 1.0 (Evaluación y Visualización Antropométrica brinda también la posibilidad de almacenar los datos, de incorporar tablas de comparación (por default el sistema trae las tablas de la SAP y del NCHS, y de exportar la información al programa EPINFO y a la mayoría de las aplicaciones estándar de escritorio (planillas de cálculo, procesadores de texto, etc.. La aplicación posee también una modalidad de sugerencias de diagnóstico, con referencias bibliográficas, que puede ser de ayuda, tanto para el profesional de A.P.S. como para el investigador.

Extreme-Environment Silicon-Carbide (SiC) Wireless Sensor Suite

Science.gov (United States)

Yang, Jie

2015-01-01

Phase II objectives: Develop an integrated silicon-carbide wireless sensor suite capable of in situ measurements of critical characteristics of NTP engine; Compose silicon-carbide wireless sensor suite of: Extreme-environment sensors center, Dedicated high-temperature (450 deg C) silicon-carbide electronics that provide power and signal conditioning capabilities as well as radio frequency modulation and wireless data transmission capabilities center, An onboard energy harvesting system as a power source.

Astronaut Neil Armstrong in Launch Complex 16 trailer during suiting up

Science.gov (United States)

1966-01-01

Astronaut Neil A. Armstrong, command pilot of the Gemini 8 space flight, sits in the Launch Complex 16 trailer during suiting up operations for the Gemini 8 mission. Suit technician Jim Garrepy assists.

Metabolic assessments during extra-vehicular activity

Science.gov (United States)

Osipov, Yu. Yu.; Spichkov, A. N.; Filipenkov, S. N.

Extra-vehicular activity (EVA) has a significant role during extended space flights. It demonstrates that humans can survive and perform useful work outside the Orbital Space Stations (OSS) while wearing protective space suits (SS). When the International Space Station 'Alpha'(ISSA) is fully operational, EVA assembly, installation, maintenance and repair operations will become an everyday repetitive work activity in space. It needs new ergonomic evaluation of the work/rest schedule for an increasing of the labor amount per EVA hour. The metabolism assessment is a helpful method to control the productivity of the EVA astronaut and to optimize the work/rest regime. Three following methods were used in Russia to estimate real-time metabolic rates during EVA: 1. Oxygen consumption, computed from the pressure drop in a high pressure bottle per unit time (with actual thermodynamic oxygen properties under high pressure and oxygen leakage taken into account). 2. Carbon dioxide production, computed from CO 2 concentration at the contaminant control cartridge and gas flow rate in the life support subsystem closed loop (nominal mode) or gas leakage in the SS open loop (emergency mode). 3. Heat removal, computed from the difference between the temperatures of coolant water or gas and its flow rate in a unit of time (with assumed humidity and wet oxygen state taken into account). Comparison of heat removal values with metabolic rates enables us to determine the thermal balance during an operative medical control of EVA at "Salyut-6", "Salyut-7" and "Mir" OSS. Complex analysis of metabolism, body temperature and heat rate supports a differential diagnosis between emotional and thermal components of stress during EVA. It gives a prognosis of human homeostasis during EVA. Available information has been acquired into an EVA data base which is an effective tool for ergonomical optimization.

Heat and mass transfer in air-fed pressurised suits

International Nuclear Information System (INIS)

Tesch, K.; Collins, M.W.; Karayiannis, T.G.; Atherton, M.A.; Edwards, P.

2009-01-01

Air-fed pressurised suits are used to protect workers against contamination and hazardous environments. The specific application here is the necessity for regular clean-up maintenance within the torus chamber of fusion reactors. The current design of suiting has been developed empirically. It is, therefore, very desirable to formulate a thermo-fluids model, which will be able to define optimum designs and operating parameters. Two factors indicate that the modelling should be as comprehensive as possible. Firstly, the overall thermo-fluids problem is three-dimensional and includes mass as well as heat transfer. The fluid field is complex, bounded on one side by the human body and on the other by what may be distensible, porous and multi-layer clothing. In this paper, we report firstly the modelling necessary for the additional mass and heat transport processes. This involves the use of Fick's and Fourier's laws and conjugate heat transfer. The results of an initial validation study are presented. Temperatures at the outlet of the suits were obtained experimentally and compared with those predicted by the overall CFD model. Realistic three-dimensional geometries were used for the suit and human body. Calculations were for turbulent flow with single- and two-component (species) models

A rapidly equilibrating, thin film, passive water sampler for organic contaminants; characterization and field testing

Energy Technology Data Exchange (ETDEWEB)

St George, Tiffany [Department of Marine Science, University of Connecticut, 1080 Shennecossett Road, Groton, CT 06340 (United States); Department of Science, United States Coast Guard Academy, 27 Mohegan Ave., New London, CT 06320 (United States); Vlahos, Penny, E-mail: penny.vlahos@uconn.ed [Department of Chemistry, University of Connecticut, 55 Eagleville Road, Storrs, CT 06269 (United States); Department of Marine Science, University of Connecticut, 1080 Shennecossett Road, Groton, CT 06340 (United States); Harner, Tom [Science and Technology Branch, Environment Canada, 4905 Dufferin Street, Toronto, Ontario M3H 5T4 (Canada); Helm, Paul [Environmental Monitoring and Reporting Branch, Ontario Ministry of the Environment, 125 Resources Rd, Toronto, Ontario M9P 3V6 (Canada); Wilford, Bryony [Science and Technology Branch, Environment Canada, 4905 Dufferin Street, Toronto, Ontario M3H 5T4 (Canada)

2011-02-15

Improving methods for assessing the spatial and temporal resolution of organic compound concentrations in marine environments is important to the sustainable management of our coastal systems. Here we evaluate the use of ethylene vinyl acetate (EVA) as a candidate polymer for thin-film passive sampling in waters of marine environments. Log K{sub EVA-W} partition coefficients correlate well (r{sup 2} = 0.87) with Log K{sub OW} values for selected pesticides and polychlorinated biphenyls (PCBs) where Log K{sub EVA-W} = 1.04 Log K{sub OW} + 0.22. EVA is a suitable polymer for passive sampling due to both its high affinity for organic compounds and its ease of coating at sub-micron film thicknesses on various substrates. Twelve-day field deployments were effective in detecting target compounds with good precision making EVA a potential multi-media fugacity meter. - Research highlights: Calibration and field testing of a thin-film passive sampler in marine systems. Ethylene vinyl acetate (EVA) is effective for a wide spectrum of organic compounds. EVA performs with high precision and reproducibility. EVA is effective in marine systems at environmentally relevant concentrations. EVA is recommended as a multi-media fugacity meter for environmental applications. - An ethylene vinyl acetate (EVA), thin-film passive sampler for the detection of organic compounds in marine environments is calibrated and field tested.

Adaptação, rendimento, evasão e vivências acadêmicas no ensino superior: revisão da literatura

Directory of Open Access Journals (Sweden)

Cristiane Maria Barra da Matta

Full Text Available Resumo O início da vida acadêmica é um período de grandes mudanças para o estudante, que muitas vezes é tratado de forma infantilizada no ensino médio e se depara com as responsabilidades e exigências da universidade. O presente trabalho teve como objetivo revisar artigos, publicados entre 2005 e 2015, referentes à adaptação universitária relacionada às vivências acadêmicas, rendimento e evasão, no curso de Engenharia. Para tanto, foram realizadas pesquisas nas seguintes bases de dados eletrônicos: Biblioteca Virtual de Saúde (BVS, Scielo Brasil e Portal de Periódicos Eletrônicos de Psicologia (PePSIC.Utilizaram-se os descritores: adaptação acadêmica, vivências acadêmicas, rendimento acadêmico, evasão e engenharia. Foram encontrados 55 artigos, porém somente 16 atenderam os critérios de inclusão. A maioria dos artigos empíricos relacionados (66,7% utiliza o instrumento Questionário de Vivências Acadêmicas (QVA ou Questionário de Vivências Acadêmicas - versão reduzida (QVA-r. Dois deles (13,3% utilizaram esse instrumento conjuntamente com o Inventário de Habilidades Sociais e outros três (20,0% com o Questionário de caracterização dos estudantes. Conclui-se que os relacionamentos interpessoais podem favorecer o rendimento acadêmico e adiar a evasão, assim como os serviços de apoio aos estudantes; e constatou-se a escassez do tema em questão nos cursos de engenharia.

STS-74 M.S. Jerry L. Ross suits up

Science.gov (United States)

1995-01-01

Spaceflight veteran Jerry L. Ross, Mission Specialist 2 on Shuttle Mission STS-74, is assisted by a suit technician as he finishes getting into his launch/entry suit in the Operations and Checkout Building. Ross and four fellow astronauts will depart shortly for Launch Pad 39A, where the Space Shuttle Atlantis awaits a second liftoff attempt during a seven-minute window scheduled to open at approximately 7:30 a.m. EST, Nov. 12.

Learning DHTMLX suite UI

CERN Document Server

Geske, Eli

2013-01-01

A fast-paced, example-based guide to learning DHTMLX.""Learning DHTMLX Suite UI"" is for web designers who have a basic knowledge of JavaScript and who are looking for powerful tools that will give them an extra edge in their own application development. This book is also useful for experienced developers who wish to get started with DHTMLX without going through the trouble of learning its quirks through trial and error. Readers are expected to have some knowledge of JavaScript, HTML, Document Object Model, and the ability to install a local web server.

Effect of swimming suit design on the energy demands of swimming.

Science.gov (United States)

Starling, R D; Costill, D L; Trappe, T A; Jozsi, A C; Trappe, S W; Goodpaster, B H

1995-07-01

Eight competitive male swimmers completed a standardized 365.8 m (400 yd) freestyle swimming trial at a fixed pace (approximately 90% of maximal effort) while wearing a torso swim suit (TOR) or a standard racing suit (STD). Oxygen uptake (VO2), blood lactate, heart rate (HR), and distance per stroke (DPS) measurements were obtained. In addition, a video-computer system was used to collect velocity data during a prone underwater glide following a maximal leg push-off from the side of the pool while wearing the TOR and STD suits. These data were used to calculate the total distance covered during the glides. VO2 (3.76 +/- 0.16 vs 3.92 +/- 0.18 l.min-1) and lactate (8.08 +/- 0.53 vs, 9.66 +/- 0.66 mM) were significantly (P 0.05) between the TOR (170.1 +/- 5.1 b.min-1) and STD (173.5 +/- 5.7 b.min-1) trials. DPS was significantly greater during the TOR (2.70 +/- 0.066 m.stroke-1) versus STD (2.58 +/- 0.054 m.stroke-1) trial. A significantly greater total distance was covered during the prone glide while wearing the TOR (2.05 +/- 0.067 m) compared to the STD (2.00 +/- 0.080 m) suit. These findings demonstrate that a specially designed torso suit reduces the energy demand of swimming compared to a standard racing suit which may be due to a reduction in body drag.

28 CFR 36.501 - Private suits.

Science.gov (United States)

2010-07-01

... ACCOMMODATIONS AND IN COMMERCIAL FACILITIES Enforcement § 36.501 Private suits. (a) General. Any person who is... order. Upon timely application, the court may, in its discretion, permit the Attorney General to... general public importance. Upon application by the complainant and in such circumstances as the court may...

Clementine sensor suite

Energy Technology Data Exchange (ETDEWEB)

Ledebuhr, A.G. [Lawrence Livermore National Lab., CA (United States)

1994-11-15

LLNL designed and built the suite of six miniaturized light-weight space-qualified sensors utilized in the Clementine mission. A major goal of the Clementine program was to demonstrate technologies originally developed for Ballistic Missile Defense Organization Programs. These sensors were modified to gather data from the moon. This overview presents each of these sensors and some preliminary on-orbit performance estimates. The basic subsystems of these sensors include optical baffles to reject off-axis stray light, light-weight ruggedized optical systems, filter wheel assemblies, radiation tolerant focal plane arrays, radiation hardened control and readout electronics and low mass and power mechanical cryogenic coolers for the infrared sensors. Descriptions of each sensor type are given along with design specifications, photographs and on-orbit data collected.

Results and Analysis from Space Suit Joint Torque Testing

Science.gov (United States)

Matty, Jennifer

2010-01-01

This joint mobility KC lecture included information from two papers, "A Method for and Issues Associated with the Determination of Space Suit Joint Requirements" and "Results and Analysis from Space Suit Joint Torque Testing," as presented for the International Conference on Environmental Systems in 2009 and 2010, respectively. The first paper discusses historical joint torque testing methodologies and approaches that were tested in 2008 and 2009. The second paper discusses the testing that was completed in 2009 and 2010.

A Test Suite for Safety-Critical Java using JML

DEFF Research Database (Denmark)

Ravn, Anders Peter; Søndergaard, Hans

2013-01-01

Development techniques are presented for a test suite for the draft specification of the Java profile for Safety-Critical Systems. Distinguishing features are: specification of conformance constraints in the Java Modeling Language, encoding of infrastructure concepts without implementation bias......, and corresponding specifications of implicitly stated behavioral and real-time properties. The test programs are auto-generated from the specification, while concrete values for test parameters are selected manually. The suite is open source and publicly accessible....

DEMON/ANGEL - A SUITE OF PROGRAMS TO CARRY OUT DENSITY MODIFICATION

NARCIS (Netherlands)

VELLIEUX, FMDAP; HUNT, JF; ROY, S; READ, RJ

1995-01-01

The DEMON/ANGEL suite of computer programs has been developed to carry out density modification by non-crystallographic symmetry-averaging, solvent-flattening and histogram-mapping techniques. This suite consists of programs that allow molecular envelopes to be defined and modified,

A Simultaneous Analytical Method for Duplex Identification of Porcine and Horse in the Meat Products by EvaGreen based Real-time PCR.

Science.gov (United States)

Sakalar, Ergün; Ergün, Seyma Özçirak; Akar, Emine

2015-01-01

A duplex real-time polymerase chain reaction (PCR) based assay for the detection of porcine and horse meat in sausages was designed by using EvaGreen fluorescent dye. Primers were selected from mitochondrial 12S rRNA and 16S rRNA genes which are powerful regions for identification of horse and porcine meat. DNA from reference samples and industrial products was successfully extracted using the GIDAGEN® Multi-Fast DNA Isolation Kit. Genomes were identified based on their specific melting peaks (Mp) which are 82.5℃ and 78℃ for horse and porcine, respectively. The assay used in this study allowed the detection of as little as 0.0001% level of horse meat and 0.001% level of porcine meat in the experimental admixtures. These findings indicate that EvaGreen based duplex real-time PCR is a potentially sensitive, reliable, rapid and accurate assay for the detection of meat species adulterated with porcine and horse meats.

DYNA3D/ParaDyn Regression Test Suite Inventory

Energy Technology Data Exchange (ETDEWEB)

Lin, Jerry I. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-09-01

The following table constitutes an initial assessment of feature coverage across the regression test suite used for DYNA3D and ParaDyn. It documents the regression test suite at the time of preliminary release 16.1 in September 2016. The columns of the table represent groupings of functionalities, e.g., material models. Each problem in the test suite is represented by a row in the table. All features exercised by the problem are denoted by a check mark (√) in the corresponding column. The definition of “feature” has not been subdivided to its smallest unit of user input, e.g., algorithmic parameters specific to a particular type of contact surface. This represents a judgment to provide code developers and users a reasonable impression of feature coverage without expanding the width of the table by several multiples. All regression testing is run in parallel, typically with eight processors, except problems involving features only available in serial mode. Many are strictly regression tests acting as a check that the codes continue to produce adequately repeatable results as development unfolds; compilers change and platforms are replaced. A subset of the tests represents true verification problems that have been checked against analytical or other benchmark solutions. Users are welcomed to submit documented problems for inclusion in the test suite, especially if they are heavily exercising, and dependent upon, features that are currently underrepresented.

International Space Station (ISS) Plasma Contactor Unit (PCU) Utilization Plan Assessment Update

Science.gov (United States)

Hernandez-Pellerano, Amri; Iannello, Christopher J.; Garrett, Henry B.; Ging, Andrew T.; Katz, Ira; Keith, R. Lloyd; Minow, Joseph I.; Willis, Emily M.; Schneider, Todd A.; Whittlesey, Edward J.;

Extending and Enhancing SAS (Static Analysis Suite)

CERN Document Server

Ho, David

2016-01-01

The Static Analysis Suite (SAS) is an open-source software package used to perform static analysis on C and C++ code, helping to ensure safety, readability and maintainability. In this Summer Student project, SAS was enhanced to improve ease of use and user customisation. A straightforward method of integrating static analysis into a project at compilation time was provided using the automated build tool CMake. The process of adding checkers to the suite was streamlined and simplied by developing an automatic code generator. To make SAS more suitable for continuous integration, a reporting mechanism summarising results was added. This suitability has been demonstrated by inclusion of SAS in the Future Circular Collider Software nightly build system. Scalability of the improved package was demonstrated by using the tool to analyse the ROOT code base.

Statistical Evaluation of Causal Factors Associated with Astronaut Shoulder Injury in Space Suits.

Science.gov (United States)

Anderson, Allison P; Newman, Dava J; Welsch, Roy E

2015-07-01

Shoulder injuries due to working inside the space suit are some of the most serious and debilitating injuries astronauts encounter. Space suit injuries occur primarily in the Neutral Buoyancy Laboratory (NBL) underwater training facility due to accumulated musculoskeletal stress. We quantitatively explored the underlying causal mechanisms of injury. Logistic regression was used to identify relevant space suit components, training environment variables, and anthropometric dimensions related to an increased propensity for space-suited injury. Two groups of subjects were analyzed: those whose reported shoulder incident is attributable to the NBL or working in the space suit, and those whose shoulder incidence began in active duty, meaning working in the suit could be a contributing factor. For both groups, percent of training performed in the space suit planar hard upper torso (HUT) was the most important predictor variable for injury. Frequency of training and recovery between training were also significant metrics. The most relevant anthropometric dimensions were bideltoid breadth, expanded chest depth, and shoulder circumference. Finally, record of previous injury was found to be a relevant predictor for subsequent injury. The first statistical model correctly identifies 39% of injured subjects, while the second model correctly identifies 68% of injured subjects. A review of the literature suggests this is the first work to quantitatively evaluate the hypothesized causal mechanisms of all space-suited shoulder injuries. Although limited in predictive capability, each of the identified variables can be monitored and modified operationally to reduce future impacts on an astronaut's health.

Analisis Perbandingan Kinerja Keuangan Sebelum Dan Sesudah Merger Dengan Menggunakan Metode Economic Value Added (Eva Dan Market Value Added (Mva Pada Pt Unilever Indonesia Tbk

Directory of Open Access Journals (Sweden)

Rakhmi Ayu Zulvina

2010-04-01

Full Text Available Merger is a decision to combine or merge two or more companies into one new company. One of the merged company in Indonesia is PT Unilever Indonesia Tbk with PT Knorr Indonesia in 2004. To identify and analyze it, EVA and MVA method is used, then the results of the calculations tested using normality test statistical tool kolmogorov smirnov, and carried out by means of differential test paired samples T-test.The increase of  EVA before and after the merger worth 125.30%. While the increase in MVA before and after the merger worth 227.33%. Increasing the value of MVA was more due to the company's market value, which is reflected in the share price and listed share, although not free from invested capital in the company

A Method for and Issues Associated with the Determination of Space Suit Joint Requirements

Science.gov (United States)

Matty, Jennifer E.; Aitchison, Lindsay

2009-01-01

In the design of a new space suit it is necessary to have requirements that define what mobility space suit joints should be capable of achieving in both a system and at the component level. NASA elected to divide mobility into its constituent parts-range of motion (ROM) and torque- in an effort to develop clean design requirements that limit subject performance bias and are easily verified. Unfortunately, the measurement of mobility can be difficult to obtain. Current technologies, such as the Vicon motion capture system, allow for the relatively easy benchmarking of range of motion (ROM) for a wide array of space suit systems. The ROM evaluations require subjects in the suit to accurately evaluate the ranges humans can achieve in the suit. However, when it comes to torque, there are significant challenges for both benchmarking current performance and writing requirements for future suits. This is reflected in the fact that torque definitions have been applied to very few types of space suits and with limited success in defining all the joints accurately. This paper discussed the advantages and disadvantages to historical joint torque evaluation methods, describes more recent efforts directed at benchmarking joint torques of prototype space suits, and provides an outline for how NASA intends to address joint torque in design requirements for the Constellation Space Suit System (CSSS).

Walking a mile in another's shoes: The impact of wearing an Age Suit.

Science.gov (United States)

Lavallière, Martin; D'Ambrosio, Lisa; Gennis, Angelina; Burstein, Arielle; Godfrey, Kathryn M; Waerstad, Hilde; Puleo, Rozanne M; Lauenroth, Andreas; Coughlin, Joseph F

2017-01-01

The "Age Suit" described in this article was developed to enable future designers, business leaders, and engineers to experience navigating the world as many older adults must. Tools such as this Age Suit offer the opportunity to "walk a mile" in another's shoes to develop empathy that can result in better design of spaces, goods, and services to meet the needs of a rapidly growing older population. This work first examined, through a series of clinical tests, whether younger adults' physical capacities were reduced in a direction consistent with aging by wearing a suit developed by the MIT AgeLab. An experiential learning task was then completed with the suit to understand its impact on completion of an instrumental activity of daily living. Results showed that younger adults wearing the suit experienced changes in task performance consistent with expected changes associated with aging. Participants' self-reports from the experiential learning task indicated that they were able to empathize with older adults regarding some issues they face while completing a grocery shopping task. Future research with the suit should involve a wider range of individuals from the population and examine what effect participants' levels of fitness have on the experience of wearing the suit.

STS-76 Payload Cmdr Ronald Sega suits up

Science.gov (United States)

1996-01-01

STS-76 Payload Commander Ronald M. Sega is donning his launch/entry suit in the Operations and Checkout Building with assistance from a suit technician. The third docking between the Russian Space Station Mir and the U.S. Space Shuttle marks the second trip into space for Sega, who recently served a five-month assignment in Russia as operations director for NASA activities there. Once suitup activities are completed the six-member STS-76 flight crew will depart for Launch Pad 39B, where the Space Shuttle Atlantis is undergoing final preparations for liftoff during an approximately seven-minute launch window opening around 3:13 a.m. EST, March 22.

What's New with MS Office Suites

Science.gov (United States)

Goldsborough, Reid

2012-01-01

If one buys a new PC, laptop, or netbook computer today, it probably comes preloaded with Microsoft Office 2010 Starter Edition. This is a significantly limited, advertising-laden version of Microsoft's suite of productivity programs, Microsoft Office. This continues the trend of PC makers providing ever more crippled versions of Microsoft's…

Antigravity Suits For Studies Of Weightlessness

Science.gov (United States)

Kravik, Stein E.; Greenleaf, John

1992-01-01

Report presents results of research on use of "antigravity" suit, one applying positive pressure to lower body to simulate some effects of microgravity. Research suggests lower-body positive pressure is alternative to bed rest or immersion in water in terrestrial studies of cardioregulatory, renal, electrolyte, and hormonal changes induced in humans by microgravity.

The CMSSW benchmarking suite: Using HEP code to measure CPU performance

International Nuclear Information System (INIS)

Benelli, G

2010-01-01

The demanding computing needs of the CMS experiment require thoughtful planning and management of its computing infrastructure. A key factor in this process is the use of realistic benchmarks when assessing the computing power of the different architectures available. In recent years a discrepancy has been observed between the CPU performance estimates given by the reference benchmark for HEP computing (SPECint) and actual performances of HEP code. Making use of the CPU performance tools from the CMSSW performance suite, comparative CPU performance studies have been carried out on several architectures. A benchmarking suite has been developed and integrated in the CMSSW framework, to allow computing centers and interested third parties to benchmark architectures directly with CMSSW. The CMSSW benchmarking suite can be used out of the box, to test and compare several machines in terms of CPU performance and report with the wanted level of detail the different benchmarking scores (e.g. by processing step) and results. In this talk we describe briefly the CMSSW software performance suite, and in detail the CMSSW benchmarking suite client/server design, the performance data analysis and the available CMSSW benchmark scores. The experience in the use of HEP code for benchmarking will be discussed and CMSSW benchmark results presented.

Sensor Technologies on Flexible Substrates

Science.gov (United States)

Koehne, Jessica

2016-01-01

NASA Ames has developed sensor technologies on flexible substrates integrated into textiles for personalized environment monitoring and human performance evaluation. Current technologies include chemical sensing for gas leak and event monitoring and biological sensors for human health and performance monitoring. Targeted integration include next generation EVA suits and flexible habitats.

The Effect of Nano Loading and Ultrasonic Compounding of EVA/LDPE/Nano-magnesium Hydroxide on Mechanical Properties and Distribution of Nano Particles

Science.gov (United States)

Azman, I. A.; Salleh, R. M.; Alauddin, S. M.; Shueb, M. I.

2018-05-01

Blends of Ethylene Vinyl Acetate (EVA) and Low-Density Polyethylene (LDPE) are promising composite which have good mechanical properties to environmental stress cracking. However, they lack fire resistant properties, which limits it usage in wire and cable industry. In order to improve flame retardancy ability, a range of nano-magnesium hydroxide (nano-MH) loading which is from 0 phr to maximum of 20 phr with ultrasonic extrusion 0-100 kHz frequencies have been introduced. Ultrasonic extrusion was used to improve the distribution of nano-MH. It was found that, 10 phr of nano loading with 100 kHz ultrasonic assisted has greater tensile strength compared to the nanocomposite without ultrasonication. Further increase of nano MH loading, will decrease the tensile properties. Better elongation at break was observed at10 phr nano-MH with the frequency of 50 kHz. The sample of 20 phr of nanoMH assisted with 50 kHz ultrasonic exhibits good flexural properties while 10 phr of nano-MH without the ultrasonic assisted demonstrates good in izod impact properties. From the evaluation of mechanical properties studied, it was found that 10 phr of nano-MH has shown the best performance among all the samples tested for EVA/LDPE/nano-MH composites. Transmission Electron Microscopy (TEM) has been conducted on 10 phr sample with different frequencies in order to observe the distribution of nano-MH particles. The sample with 100 kHz frequency shows more uniform dispersion of nano-MH in EVA/LDPE composites. This investigation indicates that the ultrasonic technology can enhance the mechanical properties studied as well as the dispersion of nano particles in the composite.

33 CFR 144.20-5 - Exposure suits.

Science.gov (United States)

2010-07-01

... light that is approved under 46 CFR 161.012. Each light must be securely attached to the front shoulder... lanyard coiled and stopped off. (f) No stowage container for exposure suits may be capable of being locked...

Characterization of Thermo-Physical Properties of EVA/ATH: Application to Gasification Experiments and Pyrolysis Modeling

Directory of Open Access Journals (Sweden)

Bertrand Girardin

2015-11-01

Full Text Available The pyrolysis of solid polymeric materials is a complex process that involves both chemical and physical phenomena such as phase transitions, chemical reactions, heat transfer, and mass transport of gaseous components. For modeling purposes, it is important to characterize and to quantify the properties driving those phenomena, especially in the case of flame-retarded materials. In this study, protocols have been developed to characterize the thermal conductivity and the heat capacity of an ethylene-vinyl acetate copolymer (EVA flame retarded with aluminum tri-hydroxide (ATH. These properties were measured for the various species identified across the decomposition of the material. Namely, the thermal conductivity was found to decrease as a function of temperature before decomposition whereas the ceramic residue obtained after the decomposition at the steady state exhibits a thermal conductivity as low as 0.2 W/m/K. The heat capacity of the material was also investigated using both isothermal modulated Differential Scanning Calorimetry (DSC and the standard method (ASTM E1269. It was shown that the final residue exhibits a similar behavior to alumina, which is consistent with the decomposition pathway of EVA/ATH. Besides, the two experimental approaches give similar results over the whole range of temperatures. Moreover, the optical properties before decomposition and the heat capacity of the decomposition gases were also analyzed. Those properties were then used as input data for a pyrolysis model in order to predict gasification experiments. Mass losses of gasification experiments were well predicted, thus validating the characterization of the thermo-physical properties of the material.

Characterization of Thermo-Physical Properties of EVA/ATH: Application to Gasification Experiments and Pyrolysis Modeling.

Science.gov (United States)

Girardin, Bertrand; Fontaine, Gaëlle; Duquesne, Sophie; Försth, Michael; Bourbigot, Serge

2015-11-20

The pyrolysis of solid polymeric materials is a complex process that involves both chemical and physical phenomena such as phase transitions, chemical reactions, heat transfer, and mass transport of gaseous components. For modeling purposes, it is important to characterize and to quantify the properties driving those phenomena, especially in the case of flame-retarded materials. In this study, protocols have been developed to characterize the thermal conductivity and the heat capacity of an ethylene-vinyl acetate copolymer (EVA) flame retarded with aluminum tri-hydroxide (ATH). These properties were measured for the various species identified across the decomposition of the material. Namely, the thermal conductivity was found to decrease as a function of temperature before decomposition whereas the ceramic residue obtained after the decomposition at the steady state exhibits a thermal conductivity as low as 0.2 W/m/K. The heat capacity of the material was also investigated using both isothermal modulated Differential Scanning Calorimetry (DSC) and the standard method (ASTM E1269). It was shown that the final residue exhibits a similar behavior to alumina, which is consistent with the decomposition pathway of EVA/ATH. Besides, the two experimental approaches give similar results over the whole range of temperatures. Moreover, the optical properties before decomposition and the heat capacity of the decomposition gases were also analyzed. Those properties were then used as input data for a pyrolysis model in order to predict gasification experiments. Mass losses of gasification experiments were well predicted, thus validating the characterization of the thermo-physical properties of the material.

EVA GREEN REAL-TIME PCR USED TO DETECT CELERY AS AN ALLERGEN IN FOOD

Directory of Open Access Journals (Sweden)

Ondrej Škultéty

2011-04-01

Full Text Available EvaGreen®  Real-Time PCR method has been used for celery(Apium graveolens allergen detection. A primer designed in mannitol dehydrogenase gene region has been used for specific celery identification in sample. The results show possibility to create calibration curve using artificially adulterated samples. The increasing variability between parallel calibration of celery samples has been observed from 0.1 % to 100%. Detection limit has been set to value 0.1% in celery representing 1000 ppm. Fluorescent signal has been presented even in samples with lower percentage addition of celery but these samples have been excluded according to unspecific melting curve.doi:10.5219/138

Proposed recommended procedure for the use of OAEs in hearing conservation: A Delphi exercise: Presentation

CSIR Research Space (South Africa)

Edwards, A

2013-10-01

Full Text Available 6 Methodology • well suited as a method for consensus-building • designed as a group communication process • aims to achieve a convergence of opinion on a specific real- world issue • Techniques used - Conference telephonic calls... Recommended Procedure Interpretation guidelines If 3-5dBSPL reduction in emission from previous test at any frequency counsel client and warn of deterioration. Review other results on similar exposed workers. If similar or greater deterioration...

Evaluation of Triathlon Suit Characteristics Relevant to Thermophysiology of an Athlete

Directory of Open Access Journals (Sweden)

Chris Watson

2018-02-01

Full Text Available The thermophysiological function of clothing influences athletic wellbeing and performance, particularly in outdoor endurance activities such as triathlon. However, there is very little existing research on the performance of triathlon suits relative to thermophysiological function of the wearer. This pilot study provides a benchmark for triathlon suit performance and insights into improving the suit design and material engineering. The study assessed the thermal and breathability attributes of 6 triathlon suits and concluded that while both of the attributes were similar overall, they varied in different body zones due to different design, construction and materials. Local thermal and evaporative performance were affected by fabric construction; double fabric layering in the stomach panel; the number, size, shape and material structure of rear pockets; cycle crotch pad size, shape and thickness; and panel design. The results of this study show the importance of garment design, construction and materials for the best thermal and evaporative resistance attributes of sportswear.

STS-82 Pilot Scott J. 'Doc' Horowitz Suit Up

Science.gov (United States)

1997-01-01

STS-82 Pilot Scott J. 'Doc' Horowitz puts on a glove of his launch and entry suit with assistance from a suit technician in the Operations and Checkout Building. This is Horowitz''';s second space flight. He and the six other crew members will depart shortly for Launch Pad 39A, where the Space Shuttle Discovery awaits liftoff on a 10-day mission to service the orbiting Hubble Space Telescope (HST). This will be the second HST servicing mission. Four back-to-back spacewalks are planned.

Surgical Space Suits Increase Particle and Microbiological Emission Rates in a Simulated Surgical Environment.

Science.gov (United States)

Vijaysegaran, Praveen; Knibbs, Luke D; Morawska, Lidia; Crawford, Ross W

2018-05-01

The role of space suits in the prevention of orthopedic prosthetic joint infection remains unclear. Recent evidence suggests that space suits may in fact contribute to increased infection rates, with bioaerosol emissions from space suits identified as a potential cause. This study aimed to compare the particle and microbiological emission rates (PER and MER) of space suits and standard surgical clothing. A comparison of emission rates between space suits and standard surgical clothing was performed in a simulated surgical environment during 5 separate experiments. Particle counts were analyzed with 2 separate particle counters capable of detecting particles between 0.1 and 20 μm. An Andersen impactor was used to sample bacteria, with culture counts performed at 24 and 48 hours. Four experiments consistently showed statistically significant increases in both PER and MER when space suits are used compared with standard surgical clothing. One experiment showed inconsistent results, with a trend toward increases in both PER and MER when space suits are used compared with standard surgical clothing. Space suits cause increased PER and MER compared with standard surgical clothing. This finding provides mechanistic evidence to support the increased prosthetic joint infection rates observed in clinical studies. Copyright © 2017 Elsevier Inc. All rights reserved.

33 CFR 150.518 - What are the inspection requirements for work vests and immersion suits?

Science.gov (United States)

2010-07-01

... requirements for work vests and immersion suits? 150.518 Section 150.518 Navigation and Navigable Waters COAST... vests and immersion suits? (a) All work vests and immersion suits must be inspected by the owner or... a work vest or immersion suit is inspected and is in serviceable condition, then it may remain in...

FusionCharts Beginner's Guide The Official Guide for FusionCharts Suite

CERN Document Server

Nadhani, Sanket; Bhattacharya, Shamasis

2012-01-01

The book is written as a practical, step-by-step guide to using FusionCharts Suite. The book not only teaches you the fundamentals and implementation of FusionCharts Suite, but also makes you the data visualization guru among your friends and colleagues by teaching how to select the right chart type and usability tips. Filled with examples, code samples and practical tips in a no-nonsense way, the book is a breeze to read.This book is both for beginners and advanced web developers who need to create interactive charts for their web applications. No previous knowledge of FusionCharts Suite is a

Imaginario femenino en el populismo argentino. Género y nación en La razón de mi vida, de Eva Perón

Directory of Open Access Journals (Sweden)

Susana Rosano

2014-06-01

Full Text Available En La razón de mi vida, Eva Perón ayuda a construir una imagen de sí misma profundamente atravesada por estrategias de representación melodramáticas. En contraste con la mayoría de las autobiografías femeninas o masculinas, no se trata aquí de un recuento introspectivo. Eva no relata su vida desde el comienzo, desde su infancia. No aprovecha la oportunidad para echar luz sobre las zonas oscuras de su biografía ni para aclarar ninguna de las acusaciones a las que sus reconocidos “supercríticos” la tenían acostumbrada. Se trata, por lo tanto, de una autobiografía sui generis, descentrada, híbrida: el relato de los años de lucha política junto a Perón. De esta manera, Eva se inscribe en el discurso político con una estrategia absolutamente inusual para el género. Su participación en la arena pública está registrada desde un desvío: su lucha es una historia de amor múltiple, con Perón y con “el pueblo”. El objetivo de este trabajo es analizar las tecnologías autobiográficas utilizadas en el texto en relación con los discursos de verdad e identidad femenina disponibles en la época en que fue escrito, la década del 50 en Argentina.

Prokofiev. "Romeo and Juliet" - Suites / Iran March

Index Scriptorium Estoniae

March, Iran

1991-01-01

Uuest heliplaadist "Prokofiev. "Romeo and Juliet" - Suites: N 1 Op. 64 bis a; N 2 Op. 64 ter b; N 3 Op. 101 c. Royal Scottish National Orchestra /Neeme Järvi" Chandos cassette ABTD 1536; CD CHAN 8940 (78 minutes) etc

Biosensors for EVA: Improved Instrumentation for Ground-based Studies

Science.gov (United States)

Soller, B.; Ellerby, G.; Zou, F.; Scott, P.; Jin, C.; Lee, S. M. C.; Coates, J.

2010-01-01

During lunar excursions in the EVA suit, real-time measurement of metabolic rate is required to manage consumables and guide activities to ensure safe return to the base. Metabolic rate, or oxygen consumption (VO2), is normally measured from pulmonary parameters but cannot be determined with standard techniques in the oxygen-rich environment of a spacesuit. Our group has developed novel near infrared spectroscopic (NIRS) methods to calculate muscle oxygen saturation (SmO 2), hematocrit, and pH, and we recently demonstrated that we can use our NIRS sensor to measure VO 2 on the leg during cycling. Our NSBRI project has 4 objectives: (1) increase the accuracy of the metabolic rate calculation through improved prediction of stroke volume; (2) investigate the relative contributions of calf and thigh oxygen consumption to metabolic rate calculation for walking and running; (3) demonstrate that the NIRS-based noninvasive metabolic rate methodology is sensitive enough to detect decrement in VO 2 in a space analog; and (4) improve instrumentation to allow testing within a spacesuit. Over the past year we have made progress on all four objectives, but the most significant progress was made in improving the instrumentation. The NIRS system currently in use at JSC is based on fiber optics technology. Optical fiber bundles are used to deliver light from a light source in the monitor to the patient, and light reflected back from the patient s muscle to the monitor for spectroscopic analysis. The fiber optic cables are large and fragile, and there is no way to get them in and out of the test spacesuit used for ground-based studies. With complimentary funding from the US Army, we undertook a complete redesign of the sensor and control electronics to build a novel system small enough to be used within the spacesuit and portable enough to be used by a combat medic. In the new system the filament lamp used in the fiber optic system was replaced with a novel broadband near infrared

A comparison of two Shuttle launch and entry suits - Reach envelope, isokinetic strength, and treadmill tests

Science.gov (United States)

Schafer, Lauren E.; Rajulu, Sudhakar L.; Klute, Glenn K.

1992-01-01

A quantification has been conducted of any existing differences between the performance, in operational conditions, of the Space Shuttle crew Launch Entry Suit (LES) and the new Advanced Crew Escape Suit (ACES). While LES is a partial-pressure suit, the ACES system which is being considered as a replacement for LES is a full-pressure suit. Three tests have been conducted with six subjects to ascertain the suits' reach envelope, strength, and treadmill performance. No significant operational differences were found between the two suit designs.

Quem está ficando para trás? Uma Década de Evasão nos Cursos Brasileiros de Graduação em Administração de Empresas e Ciências Contábeis

Directory of Open Access Journals (Sweden)

Jacqueline Veneroso Alves da Cunha

2015-01-01

Full Text Available A evasão em Instituições de Ensino Superior (IES públicas e privadas está associada com perdas sociais, acadêmicas e econômicas consideráveis. Essas perdas afetam toda a sociedade, já que os cidadãos pagam, direta ou indiretamente, pela sua própria educação e a dos seus familiares. O principal objetivo deste estudo foi analisar o comportamento de evasão dos estudantes matriculados nos cursos de graduação em Administração de Empresas e Ciências Contábeis em IES brasileiras entre 2001 e 2010. As taxas de evasão foram pesquisadas por tipo de IES e correlacionadas com o percentual de estudantes que concluíram os seus cursos dentro do prazo ideal. As hipóteses foram testadas com o teste ANOVA, e as variáveis foram submetidas à análise de correspondência simples e múltipla. As estatísticas descritivas mostraram níveis mais altos de evasão nos cursos de Administração de Empresas do que em Ciências Contábeis, porém em níveis gerais mais baixos quando comparados com a literatura. O índice de prazo ideal de conclusão do curso foi maior para Ciências Contábeis, embora não significativamente. Menos de um quarto dos estudantes concluíram os seus cursos dentro do período esperado de cinco anos. Em geral, as conclusões indicam que os cursos de Ciências Contábeis têm taxas menores de evasão nas universidades e nos centros universitários, enquanto os cursos de Administração de Empresas têm taxas maiores de evasão nas faculdades, escolas, institutos e centros de ensino tecnológico. Os resultados deste estudo não pretendem ser uma generalização, mas representam padrões observados dentro das classificações adotadas no estudo.

A Parametric Model of Shoulder Articulation for Virtual Assessment of Space Suit Fit

Science.gov (United States)

Kim, K. Han; Young, Karen S.; Bernal, Yaritza; Boppana, Abhishektha; Vu, Linh Q.; Benson, Elizabeth A.; Jarvis, Sarah; Rajulu, Sudhakar L.

2016-01-01

Suboptimal suit fit is a known risk factor for crewmember shoulder injury. Suit fit assessment is however prohibitively time consuming and cannot be generalized across wide variations of body shapes and poses. In this work, we have developed a new design tool based on the statistical analysis of body shape scans. This tool is aimed at predicting the skin deformation and shape variations for any body size and shoulder pose for a target population. This new process, when incorporated with CAD software, will enable virtual suit fit assessments, predictively quantifying the contact volume, and clearance between the suit and body surface at reduced time and cost.

Enhancements to the opera-3d suite

International Nuclear Information System (INIS)

Riley, C.P.

1997-01-01

The OPERA-3D suite of programs has been enhanced to include 2 additional 3 dimensional finite element based solvers, with complimentary features in the pre- and postprocessing. SOPRANO computes electromagnetic fields at high frequency including displacement current effects. It has 2 modules emdash a deterministic solution at a user defined frequency and an eigenvalue solution for modal analysis. It is suitable for designing microwave structures and cavities found in particle accelerators. SCALA computes electrostatic fields in the presence of space charge from charged particle beams. The user may define the emission characteristics of electrodes or plasma surfaces and compute the resultant space charge limited beams, including the presence of magnetic fields. Typical applications in particle accelerators are electron guns and ion sources. Other enhancements to the suite include additional capabilities in TOSCA and ELEKTRA, the static and dynamic solvers. copyright 1997 American Institute of Physics