EVA Physiology and Medical Considerations Working in the Suit

Science.gov (United States)

Parazynski, Scott

2012-01-01

This "EVA Physiology and Medical Considerations Working in the Suit" presentation covers several topics related to the medical implications and physiological effects of suited operations in space from the perspective of a physician with considerable first-hand Extravehicular Activity (EVA) experience. Key themes include EVA physiology working in a pressure suit in the vacuum of space, basic EVA life support and work support, Thermal Protection System (TPS) inspections and repairs, and discussions of the physical challenges of an EVA. Parazynski covers the common injuries and significant risks during EVAs, as well as physical training required to prepare for EVAs. He also shares overall suit physiological and medical knowledge with the next generation of Extravehicular Mobility Unit (EMU) system designers.

An investigation on radiation crosslinked foam of LDPE/EVA blends

International Nuclear Information System (INIS)

Siqin Dalai; Chen Wenxiu

1995-01-01

LDPE/EVA blend, irradiated by γ-ray then expansed by heat as a foam material, the EVA content in LDPE/EVA blend was benefited to form gelation. The gel fraction on irradiated LDPE/EVA blend increased with the increasing of its EVA content in a given dose. The gel fraction values of LDPE/EVA blend with 30% EVA content were higher than those of other blends in a same given dose, its gel fraction value was 1.7 times as those values of LDPE without EVA. The gel fractions on LDPE/EVA blend were increased with dose in oxygen, in air and in nitrogen, the formation of gel was limited by oxygen. The oxidation products on foam of LDPE/EVA blend were observed in nitrogen, in air and in oxygen by FTIR spectra. The LDPE/EVA blend system has no protection effect from oxidation comparison with the LDPE system without EVA which has less oxidation product than those without EVA in a same given gel fraction. The gel fraction on foam of LDPE/EVA blend around 25-35%, dose 25 ± 5kGy, irradiated by γ-ray in air or in nitrogen, with higher expansion ratio (19), smaller cell diameter (0.175mm), lower apparent density (0.042g/cm 3 ), higher tensile strength (0.40MPa) and longer elongation at break (290-360%) on foam of LDPE/EVA blend were selected. It was opitimum condition for application in this systems. The relations among gel fraction on LDPE/EVA blend, expansion ratio, apparent density, average cell diameter and mechanical properties of foamed sheet were discussed. (author)

Eva ja Adele: "Kus oleme meie, seal on muuseum" / Eva & Adele ; intervjueerinud Tanel Veenre

Index Scriptorium Estoniae

Eva & Adele, kunstnikepaar

2009-01-01

Berliini kunstnikepaari Eva & Adele näitus "Stereoefekt" Tallinna Kunstihoones 28. maini, kuraator Harry Liivrand. Kunstnikud räägivad koostööst meediaga, sooküsimusest, julgusest teha kunstis midagi uut, oma otsusest elada elu Eva ja Adelena, inimeste julgusest teha valikuid, inimlikkusest, üksindusest, oma maalidest, kollaažidest ja videotest, missioonitundest

Miniature EVA Software Defined Radio

Science.gov (United States)

Pozhidaev, Aleksey

2012-01-01

As NASA embarks upon developing the Next-Generation Extra Vehicular Activity (EVA) Radio for deep space exploration, the demands on EVA battery life will substantially increase. The number of modes and frequency bands required will continue to grow in order to enable efficient and complex multi-mode operations including communications, navigation, and tracking applications. Whether conducting astronaut excursions, communicating to soldiers, or first responders responding to emergency hazards, NASA has developed an innovative, affordable, miniaturized, power-efficient software defined radio that offers unprecedented power-efficient flexibility. This lightweight, programmable, S-band, multi-service, frequency- agile EVA software defined radio (SDR) supports data, telemetry, voice, and both standard and high-definition video. Features include a modular design, an easily scalable architecture, and the EVA SDR allows for both stationary and mobile battery powered handheld operations. Currently, the radio is equipped with an S-band RF section. However, its scalable architecture can accommodate multiple RF sections simultaneously to cover multiple frequency bands. The EVA SDR also supports multiple network protocols. It currently implements a Hybrid Mesh Network based on the 802.11s open standard protocol. The radio targets RF channel data rates up to 20 Mbps and can be equipped with a real-time operating system (RTOS) that can be switched off for power-aware applications. The EVA SDR's modular design permits implementation of the same hardware at all Network Nodes concept. This approach assures the portability of the same software into any radio in the system. It also brings several benefits to the entire system including reducing system maintenance, system complexity, and development cost.

Applications of EVA guidelines and design criteria. Volume 3: EVA systems cost model formating

Science.gov (United States)

Brown, N. E.

1973-01-01

The development of a model for estimating the impact of manned EVA costs on future payloads is discussed. Basic information on the EV crewman requirements, equipment, physical and operational characteristics, and vehicle interfaces is provided. The cost model is being designed to allow system designers to quantify the impact of EVA on vehicle and payload systems.

Comparison Of Human Modelling Tools For Efficiency Of Prediction Of EVA Tasks

Science.gov (United States)

Dischinger, H. Charles, Jr.; Loughead, Tomas E.

1998-01-01

Construction of the International Space Station (ISS) will require extensive extravehicular activity (EVA, spacewalks), and estimates of the actual time needed continue to rise. As recently as September, 1996, the amount of time to be spent in EVA was believed to be about 400 hours, excluding spacewalks on the Russian segment. This estimate has recently risen to over 1100 hours, and it could go higher before assembly begins in the summer of 1998. These activities are extremely expensive and hazardous, so any design tools which help assure mission success and improve the efficiency of the astronaut in task completion can pay off in reduced design and EVA costs and increased astronaut safety. The tasks which astronauts can accomplish in EVA are limited by spacesuit mobility. They are therefore relatively simple, from an ergonomic standpoint, requiring gross movements rather than time motor skills. The actual tasks include driving bolts, mating and demating electric and fluid connectors, and actuating levers; the important characteristics to be considered in design improvement include the ability of the astronaut to see and reach the item to be manipulated and the clearance required to accomplish the manipulation. This makes the tasks amenable to simulation in a Computer-Assisted Design (CAD) environment. For EVA, the spacesuited astronaut must have his or her feet attached on a work platform called a foot restraint to obtain a purchase against which work forces may be actuated. An important component of the design is therefore the proper placement of foot restraints.

Simulation of Martian EVA at the Mars Society Arctic Research Station

Science.gov (United States)

Pletser, V.; Zubrin, R.; Quinn, K.

The Mars Society has established a Mars Arctic Research Station (M.A.R.S.) on Devon Island, North of Canada, in the middle of the Haughton crater formed by the impact of a large meteorite several million years ago. The site was selected for its similarities with the surface of the Mars planet. During the Summer 2001, the MARS Flashline Research Station supported an extended international simulation campaign of human Mars exploration operations. Six rotations of six person crews spent up to ten days each at the MARS Flashline Research Station. International crews, of mixed gender and professional qualifications, conducted various tasks as a Martian crew would do and performed scientific experiments in several fields (Geophysics, Biology, Psychology). One of the goals of this simulation campaign was to assess the operational and technical feasibility of sustaining a crew in an autonomous habitat, conducting a field scientific research program. Operations were conducted as they would be during a Martian mission, including Extra-Vehicular Activities (EVA) with specially designed unpressurized suits. The second rotation crew conducted seven simulated EVAs for a total of 17 hours, including motorized EVAs with All Terrain Vehicles, to perform field scientific experiments in Biology and Geophysics. Some EVAs were highly successful. For some others, several problems were encountered related to hardware technical failures and to bad weather conditions. The paper will present the experiment programme conducted at the Mars Flashline Research Station, the problems encountered and the lessons learned from an EVA operational point of view. Suggestions to improve foreseen Martian EVA operations will be discussed.

Use MACES IVA Suit for EVA Mobility Evaluations

Science.gov (United States)

Watson, Richard D.

2014-01-01

The use of an Intra-Vehicular Activity (IVA) suit for a spacewalk or Extra-Vehicular Activity (EVA) was evaluated for mobility and usability in the Neutral Buoyancy Lab (NBL) environment. The Space Shuttle Advanced Crew Escape Suit (ACES) has been modified (MACES) to integrate with the Orion spacecraft. The first several missions of the Orion MPCV spacecraft will not have mass available to carry an EVA specific suit so any EVA required will have to be performed by the MACES. Since the MACES was not designed with EVA in mind, it was unknown what mobility the suit would be able to provide for an EVA or if a person could perform useful tasks for an extended time inside the pressurized suit. The suit was evaluated in multiple NBL runs by a variety of subjects including crewmembers with significant EVA experience. Various functional mobility tasks performed included: translation, body positioning, carrying tools, body stabilization, equipment handling, and use of tools. Hardware configurations included with and without TMG, suit with IVA gloves and suit with EVA gloves. Most tasks were completed on ISS mockups with existing EVA tools. Some limited tasks were completed with prototype tools on a simulated rocky surface. Major findings include: demonstration of the ability to weigh-out the suit, understanding the need to have subjects perform multiple runs prior to getting feedback, determination of critical sizing factors, and need for adjustment of suit work envelop. The early testing has demonstrated the feasibility of EVA's limited duration and limited scope. Further testing is required with more flight like tasking and constraints to validate these early results. If the suit is used for EVA, it will require mission specific modifications for umbilical management or PLSS integration, safety tether attachment, and tool interfaces. These evaluations are continuing through calendar year 2014.

EVA Health and Human Performance Benchmarking Study

Science.gov (United States)

Abercromby, A. F.; Norcross, J.; Jarvis, S. L.

2016-01-01

Multiple HRP Risks and Gaps require detailed characterization of human health and performance during exploration extravehicular activity (EVA) tasks; however, a rigorous and comprehensive methodology for characterizing and comparing the health and human performance implications of current and future EVA spacesuit designs does not exist. This study will identify and implement functional tasks and metrics, both objective and subjective, that are relevant to health and human performance, such as metabolic expenditure, suit fit, discomfort, suited postural stability, cognitive performance, and potentially biochemical responses for humans working inside different EVA suits doing functional tasks under the appropriate simulated reduced gravity environments. This study will provide health and human performance benchmark data for humans working in current EVA suits (EMU, Mark III, and Z2) as well as shirtsleeves using a standard set of tasks and metrics with quantified reliability. Results and methodologies developed during this test will provide benchmark data against which future EVA suits, and different suit configurations (eg, varied pressure, mass, CG) may be reliably compared in subsequent tests. Results will also inform fitness for duty standards as well as design requirements and operations concepts for future EVA suits and other exploration systems.

EVA/TiO2 nanocomposite: Study of the properties thermal and crystallinity of the EVA/TiO2 nanocomposite

International Nuclear Information System (INIS)

Valentim, Ana C.S.; Tavares, Maria I.B.; Silva, Emerson O. da

2011-01-01

The effect of titanium dioxide nanoparticles on the thermal properties and crystallinity of the ethylene vinyl acetate (EVA) copolymer containing 28% vinyl acetate were investigated. The EVA/TiO 2 nanocomposite films with TiO 2 contents of 0,10-1% relative to the total mass of EVA, were prepared via solution. The prepared films were characterized using TG, and XRD methods. (author)

Synthesis of EVA/MWNT nanocomposites by radiation induced crosslinking

International Nuclear Information System (INIS)

Dubey, K.A.; Bhardwaj, Y.K.; Chaudhari, C.V.; Sabharwal, S.

2008-01-01

Full text: EVA is widely used as an insulating material for high voltage cables and in the footwear and toy industries due to its high flexibility and chemical inertness. The nano-composites of EVA with MWNT are of the special interest because incorporation of suitable amount of MWNT in EVA matrix is expected to significantly enhance EVA's thermal and mechanical properties, and open a new domain of applications. The modification of EVA by using high-energy radiation and with particulate filler has been widely practiced; however, there is not much information available on the radiation processing of EVA nanocomposites. To understand the effect of radiation and of MWNT addition on the physico-mechanical characteristics of EVA, different compositions of ethylene vinyl acetate (EVA)/multiple walled carbon nanotube (MWNT) nanocomposites were prepared by mixing in Brabender and subjected to different doses of gamma radiation. The efficiency of radiation vulcanization was analyzed by gel-content, Charlesby-Pinner parameter and crosslinking density measurements. Gamma radiation induced crosslinking was found to increase with MWNT fraction in EVA/MWNT nanocomposites (P o /q o range: 1.15-0.98). These results ruled out the possibility of a significant neutralization of single ionization spurs by MWNT addition. The polymer-filler interaction parameter determined from Kraus plot indicated good interaction between EVA and MWNTs. Storage modulus changed from 7 x 10 7 Pa to 1.8 x 10 8 Pa with incorporation of 5% (wt/wt) MWNT while density increased from 0.78 g/cc to 0.80 g/cc

Advanced EVA Suit Camera System Development Project

Science.gov (United States)

Mock, Kyla

2016-01-01

The National Aeronautics and Space Administration (NASA) at the Johnson Space Center (JSC) is developing a new extra-vehicular activity (EVA) suit known as the Advanced EVA Z2 Suit. All of the improvements to the EVA Suit provide the opportunity to update the technology of the video imagery. My summer internship project involved improving the video streaming capabilities of the cameras that will be used on the Z2 Suit for data acquisition. To accomplish this, I familiarized myself with the architecture of the camera that is currently being tested to be able to make improvements on the design. Because there is a lot of benefit to saving space, power, and weight on the EVA suit, my job was to use Altium Design to start designing a much smaller and simplified interface board for the camera's microprocessor and external components. This involved checking datasheets of various components and checking signal connections to ensure that this architecture could be used for both the Z2 suit and potentially other future projects. The Orion spacecraft is a specific project that may benefit from this condensed camera interface design. The camera's physical placement on the suit also needed to be determined and tested so that image resolution can be maximized. Many of the options of the camera placement may be tested along with other future suit testing. There are multiple teams that work on different parts of the suit, so the camera's placement could directly affect their research or design. For this reason, a big part of my project was initiating contact with other branches and setting up multiple meetings to learn more about the pros and cons of the potential camera placements we are analyzing. Collaboration with the multiple teams working on the Advanced EVA Z2 Suit is absolutely necessary and these comparisons will be used as further progress is made for the overall suit design. This prototype will not be finished in time for the scheduled Z2 Suit testing, so my time was

Uso de EVA Modificado com Grupos Mercaptana na Compatibilização de Misturas NBR/EPDM The Use of Mercapto-Modified EVA as Compatibilizing Agent for NBR/EPDM Blends

Directory of Open Access Journals (Sweden)

Marcia G. Oliveira

2002-10-01

compound presented better mechanical performance and more refined morphologies. Finally, aging resistance was improved by the use of mercapto-modified EVA.

Hydrogeology of the Olševa massif (Slovenia

Directory of Open Access Journals (Sweden)

Jure Krivic

2002-12-01

Full Text Available Olševa consists of highly pervious carbonates, forming a relatively big fractured and karstified aquifer. Due to its high-altitude mountainous nature, the aquifer is unpolluted and therefore has to be regarded as a potential source of drinking water for the future.The Olševa aquifer is tectonically divided into three parts. Groundwater from the two smaller aquifers, covering areas of 1,9 and 0,8 km2, located in eastern part of Ol{eva massif, flows toward Northeast into Meža river basin. In spite of several transversal faults, the rest of Olševa massif forms a relatively uniform aquifer that is conveying groundwater in westerly direction towards Rjavica valley. Rjavica valley in Austria represents the discharge area of a majority of groundwater from the main Ol{eva aquifer.

EVA: continuous automatic evaluation of protein structure prediction servers.

Science.gov (United States)

Eyrich, V A; Martí-Renom, M A; Przybylski, D; Madhusudhan, M S; Fiser, A; Pazos, F; Valencia, A; Sali, A; Rost, B

2001-12-01

Evaluation of protein structure prediction methods is difficult and time-consuming. Here, we describe EVA, a web server for assessing protein structure prediction methods, in an automated, continuous and large-scale fashion. Currently, EVA evaluates the performance of a variety of prediction methods available through the internet. Every week, the sequences of the latest experimentally determined protein structures are sent to prediction servers, results are collected, performance is evaluated, and a summary is published on the web. EVA has so far collected data for more than 3000 protein chains. These results may provide valuable insight to both developers and users of prediction methods. http://cubic.bioc.columbia.edu/eva. eva@cubic.bioc.columbia.edu

Creating a Lunar EVA Work Envelope

Science.gov (United States)

Griffin, Brand N.; Howard, Robert; Rajulu, Sudhakar; Smitherman, David

2009-01-01

A work envelope has been defined for weightless Extravehicular Activity (EVA) based on the Space Shuttle Extravehicular Mobility Unit (EMU), but there is no equivalent for planetary operations. The weightless work envelope is essential for planning all EVA tasks because it determines the location of removable parts, making sure they are within reach and visibility of the suited crew member. In addition, using the envelope positions the structural hard points for foot restraints that allow placing both hands on the job and provides a load path for reacting forces. EVA operations are always constrained by time. Tasks are carefully planned to ensure the crew has enough breathing oxygen, cooling water, and battery power. Planning first involves computers using a virtual work envelope to model tasks, next suited crew members in a simulated environment refine the tasks. For weightless operations, this process is well developed, but planetary EVA is different and no work envelope has been defined. The primary difference between weightless and planetary work envelopes is gravity. It influences anthropometry, horizontal and vertical mobility, and reaction load paths and introduces effort into doing "overhead" work. Additionally, the use of spacesuits other than the EMU, and their impacts on range of motion, must be taken into account. This paper presents the analysis leading to a concept for a planetary EVA work envelope with emphasis on lunar operations. There is some urgency in creating this concept because NASA has begun building and testing development hardware for the lunar surface, including rovers, habitats and cargo off-loading equipment. Just as with microgravity operations, a lunar EVA work envelope is needed to guide designers in the formative stages of the program with the objective of avoiding difficult and costly rework.

EVA1A inhibits GBM cell proliferation by inducing autophagy and apoptosis

Energy Technology Data Exchange (ETDEWEB)

Shen, Xue; Kan, Shifeng; Liu, Zhen [Department of Cell Biology, School of Basic Medical Sciences, Peking University Health Science Center, Beijing 100191 (China); Lu, Guang [Department of Cell Biology, School of Basic Medical Sciences, Peking University Health Science Center, Beijing 100191 (China); Department of Physiology, Yong Loo Lin School of Medicine, National University of Singapore, Singapore 117597 (Singapore); Zhang, Xiaoyan [Department of Cell Biology, School of Basic Medical Sciences, Peking University Health Science Center, Beijing 100191 (China); Chen, Yingyu [Department of Immunology, School of Basic Medical Sciences, Peking University Health Science Center, Beijing 100191 (China); Peking University Center for Human Disease Genomics, Beijing 100191 (China); Bai, Yun, E-mail: baiyun@bjmu.edu.cn [Department of Cell Biology, School of Basic Medical Sciences, Peking University Health Science Center, Beijing 100191 (China)

2017-03-01

Eva-1 homolog A (EVA1A) is a novel lysosome and endoplasmic reticulum-associated protein involved in autophagy and apoptosis. In this study, we constructed a recombinant adenovirus 5-EVA1A vector (Ad5-EVA1A) to overexpress EVA1A in glioblastoma (GBM) cell lines and evaluated its anti-tumor activities in vitro and in vivo. We found that overexpression of EVA1A in three GBM cell lines (U251, U87 and SHG44) resulted in a suppression of tumor cell growth via activation of autophagy and induction of cell apoptosis in a dose- and time-dependent manner. EVA1A-mediated autophagy was associated with inactivation of the mTOR/RPS6KB1 signaling pathway. Furthermore in vivo, overexpression of EVA1A successfully inhibited tumor growth in NOD/SCID mice. Our data suggest that EVA1A-induced autophagy and apoptosis play a role in suppressing the development of GBM and their up-regulation may be an effective method for treating this form of cancer. - Highlights: • Overexpression of EVA1A suppresses GBM cell growth. • EVA1A induces autophagy through the mTOR/RPS6KB1 pathway. • EVA1A induces GBM cell apoptosis. • EVA1A inhibits the development of GBM in vivo.

Ettevõtte tegevuse hindamine : EVA meetod / Kristo Reinsalu

Index Scriptorium Estoniae

Reinsalu, Kristo

2001-01-01

Järgneb: Raamatupidamisuudised, nr. 7, 2001, lk. 19-25. Ilmunud ka: Buhgalterskije Novosti, nr. 6, 2001, lk. 17-22; nr. 7, 2001, lk. 15-18; nr. 8, 2001, lk. 21-24. Majandusliku lisandväärtuse meetodist EVA - Economic Value Added - leidmisest ja standardimisest. Tabelid ja diagrammid: Hansapanga Grupi EVA septembris 2000; korrelatsioon turuväärtusega; tegevustulemused: mittefinantsiline lähenemine; preemia määramine; EVA ja Benchmarking

Caracterização de resíduos de copolímeros de etileno-acetato de vinila - EVA Characterization of ethylene-vinyl acetate copolymer (EVA residues

Directory of Open Access Journals (Sweden)

Ademir J. Zattera

2005-03-01

Full Text Available O poli[(etileno-co-(acetato de vinila] (EVA possui grande aplicação na indústria calçadista, sendo utilizado na confecção de placas expandidas para posterior corte de palmilhas e entressolas. Estudos realizados na região sul do Brasil mostraram que os resíduos gerados pela indústria calçadista foram superiores a 200 toneladas/mês em 2001, sendo o maior volume oriundo de recortes de placas expandidas. Por isso, o objetivo deste trabalho foi o de caracterizar resíduos de EVA de chapas expandidas, visando à reciclagem mecânica desse material. Análises em MEV demonstraram que o resíduo de EVA apresenta uma morfologia microcelular que é destruída após o processo de moagem. O resíduo de EVA moído apresenta duas fases, uma reticulada (matriz e uma não-reticulada (dispersa. O resíduo de EVA apresentou teor de gel de aproximadamente 75% em massa, cerca de 20% em massa de acetato de vinila (VAc, fora processado a partir de EVA com aproximadamente 28% de VAc e possui teor de carga inorgânica de 20% em massa, segundo análises em TGA. O EVA resíduo apresentou maiores valores de módulo elástico e de dureza, e menores valores de elongação na ruptura e de resistência ao impacto Izod. O custo energético da moagem do resíduo de EVA foi calculado como sendo inferior a 5% do valor do EVA virgem.Poly[(ethylene-co-(vinyl acetate] (EVA has large application in the shoes industries, especially as expanded sheets, in order to produce insoles and innersoles. Studies carried out in the south region of Brazil in 2001 have demonstrated that the residues generated by shoes industries were higher than 200 ton/month, the major part of which is composed by EVA expanded sheets. With this in mind, the objective of this work was to characterize the residues of expanded EVA and also to analyze the milling cost in order to make the recycling possible. The EVA residues presented originally a microcellular structure, which was destroyed after milling

Influence of association of "EVA-NBR" on indirect tensile strength of modified bituminous concrete

Science.gov (United States)

Chinoun, M.; Soudani, K.; Haddadi, S.

2016-04-01

The aim of this work is to contribute to the improvement of the mechanical properties of bituminous concrete by modification of bituminous concrete. In this study, we present the results of the indirect tensile strength "ITS" of modified bituminous concrete by the combination of two modifiers, one is a plastomer EVA (Ethylene Vinyl Acetate) and the other is a industrial waste from the shoe soles grinding NBR (Nitrile Butadiene Rubber) as crumb rubber. To modify the bitumen a wet process was used. The results show that the modification of bitumen by EVA-NBR combination increases their resistance to the indirect traction "ITS" compared to the bituminous concrete control. The mixture of 5% [50% EVA+ 50% NBR] is given the best result among the other associations.

Evaluation of an Anthropometric Human Body Model for Simulated EVA Task Assessment

Science.gov (United States)

Etter, Brad

1996-01-01

the CAD tools. One such product is Jack which was developed by the University of Pennsylvania with funding from several government agencies, including NASA. While the primary purpose of Jack is to model human figures in a ground-based (gravity) environment, it can be utilized to evaluate EVA-suited activities as well. The effects of simulated gravity must be turned off by turning off "behaviors". Although Jack provides human figures for manipulation, the primary instrument to be evaluated for EVA mobility is the work envelope provided by the EVA suit. An EVA Jack suit model has been developed by NASA-JSC and was utilized in this study. This suit model provided a more restrictive motion environment as expected for an EVA suited subject. As part of this study, the anthropometric dimensions for a 50th percentile male were compared with basic anthropometric data and were found to be representative for the population group expected in the NASA flight program. The joints for the suit were created in a manner which provided consistent performance with EVA reach envelopes published in NASA standard #3000.

EVA Glove Research Team

Science.gov (United States)

Strauss, Alvin M.; Peterson, Steven W.; Main, John A.; Dickenson, Rueben D.; Shields, Bobby L.; Lorenz, Christine H.

1992-01-01

The goal of the basic research portion of the extravehicular activity (EVA) glove research program is to gain a greater understanding of the kinematics of the hand, the characteristics of the pressurized EVA glove, and the interaction of the two. Examination of the literature showed that there existed no acceptable, non-invasive method of obtaining accurate biomechanical data on the hand. For this reason a project was initiated to develop magnetic resonance imaging as a tool for biomechanical data acquisition and visualization. Literature reviews also revealed a lack of practical modeling methods for fabric structures, so a basic science research program was also initiated in this area.

Astronaut Ronald Evans photographed during transearth coast EVA

Science.gov (United States)

1972-01-01

Astronaut Ronald E. Evans is photographed performing extravehicular activity (EVA) during the Apollo 17 spacecraft's transearth coast. During his EVA Command Module pilot Evans retrieved film cassettes from the Lunar Sounder, Mapping Camera, and Panoramic Camera. The total time for the transearth EVA was one hour seven minutes 19 seconds, starting at ground elapsed time of 257:25 (2:28 p.m.) amd ending at ground elapsed time of 258:42 (3:35 p.m.) on Sunday, December 17, 1972.

A versão de Eva: perspectiva, narrativa e interpretação em A vida de Adão e Eva

Directory of Open Access Journals (Sweden)

Cesar Motta Rios

2009-10-01

Full Text Available Neste artigo, estudo o discurso de Eva em A vida de Adão e Eva, em sua versão grega. Em um primeiro momento, introduzo o tema da mudança de perspectiva a partir de uma obra contemporânea, Vita Brevis de Jostein Gaarder. Em seguida, apresento brevemente o texto com o qual trabalho. Então, abordo o discurso de Eva, observando a maneira como este se insere na narrativa mais ampla. Reflito também sobre como a mudança de perspectiva instaurada no recontar de Eva possibilita uma narrativa na qual contar e interpretar se mesclam, à maneira dos midrashim agádicos.

EVA reactive blending with Si–H terminated polysiloxane by carbonyl hydrosilylation reaction: From compatibilised blends to crosslinking networks

International Nuclear Information System (INIS)

Bonnet, J.; Bounor-Legaré, V.; Alcouffe, P.; Cassagnau, P.

2012-01-01

A new and original method based on carbonyl hydrosilylation was developed to prepare ethylene-vinyl acetate (EVA)/polysiloxane polymer blends. This focused on the addition of hydrogenosilane groups (SiH) from polysiloxane to the carbonyl groups of EVA. The influence of the nature of the polysiloxane on blend properties was investigated by rheology and scanning electron microscopy. Mixing of a low viscosity polysiloxane with a high viscosity EVA matrix produced a two-phase morphology. The occurrence of the hydrosilylation reaction at the EVA/polysiloxane interface promoted a homogenisation of the blend depending on the molar ratio SiH/vinyl acetate groups, [SiH]/[VA], and the viscosity ratio of the blend. Two distinct behaviours were observed. The formation of a crosslinked network under shear was obtained for a low viscosity ratio between polysiloxane and EVA (λ polysiloxane/EVA = 4.0 × 10 −6 ) with a high concentration of SiH groups ([SiH]/[VA] = 0.5), while the formation of a compatibilised blend was observed for high molar mass polysiloxanes (Mn > 15,000 g mol −1 ) with a low concentration of SiH ([SiH]/[VA] −3 ). -- Highlights: ► Carbonyl hydrosilylation reaction was found to enhance EVA/polysiloxane immiscible blends. ► EVA crosslinking was obtained with a low molar mass polysiloxane. ► EVA compatibilisation was obtained with a high molar mass polysiloxane. ► Shear rate was found to improve the hydrosilylation reaction at the interface. ► A two-phase morphology of the blends was observed after reaction with fine polysiloxane nodules.

Irradiation crosslinking and halogen-free flame retardation of EVA using hydrotalcite and red phosphorus

Energy Technology Data Exchange (ETDEWEB)

Jiao Chuanmei [State Key Lab of Fire Science, University of Science and Technology of China, Anhui 230026 (China); Wang Zhengzhou [State Key Lab of Fire Science, University of Science and Technology of China, Anhui 230026 (China)]. E-mail: zwang@ustc.edu.cn; Chen Xilei [State Key Lab of Fire Science, University of Science and Technology of China, Anhui 230026 (China); Yu Benyi [State Key Lab of Fire Science, University of Science and Technology of China, Anhui 230026 (China); Hu Yuan [State Key Lab of Fire Science, University of Science and Technology of China, Anhui 230026 (China)

2006-05-15

Halogen-free flame retarded ethylene vinyl acetate copolymer (EVA) composites using Mg-Al-CO{sub 3} hydrotalcite (MALDH) and microcapsulated red phosphorus (MRP) have been prepared in a melt process. The flame retardation of the composites has been studied by the limited oxygen index (LOI) and UL-94 methods, and the thermal decomposition by the thermogravimetric analysis (TGA). The changes of their properties of the composites before and after the Gamma irradiation are compared. The synergistic effect in the flame retardation between MALDH and MRP in EVA has been found. The EVA/MALDH/MRP composites after the irradiation crosslinking result in a great increase in the Vicat softening point. The LOI value, the mechanical properties and thermal stability are also improved for the composites irradiated by a suitable irradiation dose.

Irradiation crosslinking and halogen-free flame retardation of EVA using hydrotalcite and red phosphorus

International Nuclear Information System (INIS)

Jiao Chuanmei; Wang Zhengzhou; Chen Xilei; Yu Benyi; Hu Yuan

2006-01-01

Halogen-free flame retarded ethylene vinyl acetate copolymer (EVA) composites using Mg-Al-CO 3 hydrotalcite (MALDH) and microcapsulated red phosphorus (MRP) have been prepared in a melt process. The flame retardation of the composites has been studied by the limited oxygen index (LOI) and UL-94 methods, and the thermal decomposition by the thermogravimetric analysis (TGA). The changes of their properties of the composites before and after the Gamma irradiation are compared. The synergistic effect in the flame retardation between MALDH and MRP in EVA has been found. The EVA/MALDH/MRP composites after the irradiation crosslinking result in a great increase in the Vicat softening point. The LOI value, the mechanical properties and thermal stability are also improved for the composites irradiated by a suitable irradiation dose

EVA1A/TMEM166 Regulates Embryonic Neurogenesis by Autophagy

Directory of Open Access Journals (Sweden)

Mengtao Li

2016-03-01

Full Text Available Self-renewal and differentiation of neural stem cells is essential for embryonic neurogenesis, which is associated with cell autophagy. However, the mechanism by which autophagy regulates neurogenesis remains undefined. Here, we show that Eva1a/Tmem166, an autophagy-related gene, regulates neural stem cell self-renewal and differentiation. Eva1a depletion impaired the generation of newborn neurons, both in vivo and in vitro. Conversely, overexpression of EVA1A enhanced newborn neuron generation and maturation. Moreover, Eva1a depletion activated the PIK3CA-AKT axis, leading to the activation of the mammalian target of rapamycin and the subsequent inhibition of autophagy. Furthermore, addition of methylpyruvate to the culture during neural stem cell differentiation rescued the defective embryonic neurogenesis induced by Eva1a depletion, suggesting that energy availability is a significant factor in embryonic neurogenesis. Collectively, these data demonstrated that EVA1A regulates embryonic neurogenesis by modulating autophagy. Our results have potential implications for understanding the pathogenesis of neurodevelopmental disorders caused by autophagy dysregulation.

EVA: Evryscopes for the Arctic and Antarctic

Science.gov (United States)

Richichi, A.; Law, N.; Tasuya, O.; Fors, O.; Dennihy, E.; Carlberg, R.; Tuthill, P.; Ashley, M.; Soonthornthum, B.

2017-06-01

We are planning to build Evryscopes for the Arctic and Antarctic (EVA), which will enable the first ultra-wide-field, high-cadence sky survey to be conducted from both Poles. The system is based on the successful Evryscope concept, already installed and operating since 2015 at Cerro Tololo in Chile with the following characteristics: robotic operation, 8,000 square degrees simultaneous sky coverage, 2-minute cadence, milli-mag level photometric accuracy, pipelined data processing for real-time analysis and full data storage for off-line analysis. The initial location proposed for EVA is the PEARL station on Ellesmere island; later also an antarctic location shall be selected. The science goals enabled by this unique combination of almost full-sky coverage and high temporal cadence are numerous, and include among others ground-breaking forays in the fields of exoplanets, stellar variability, asteroseismology, supernovae and other transient events. The EVA polar locations will enable uninterrupted observations lasting in principle over weeks and months. EVA will be fully robotic. We discuss the EVA science drivers and expected results, and present the logistics and the outline of the project which is expected to have first light in the winter of 2018. The cost envelope can be kept very competitive thanks to R&D already employed for the CTIO Evryscope, to our experience with both Arctic and Antarctic locations, and to the use of off-the-shelf components.

Improvements and Revamping of In-Core Instrumentation Systems

International Nuclear Information System (INIS)

Garam, Eric De

1993-01-01

The results of the improvements done by Fumarate Tia in these domains are really satisfying and it is clear that the problems of leakage existing in the old units on the thermocouples sealing systems and on the seal table of the income instrumentation, cannot exist on the French Units or on the units equipped with Fumarate Tia equipment. At the same time, all the equipment which constitute the Income instrumentation have been improved with the aim of reliability and safety. The equipment used to perform maintenance activities has also been improved to both reduce doses and increase efficiency. The purpose of this paper is to describe the principal improvements and revamping of income instrumentation systems, and to summarize the principal lessons learned from our experience on all designs of PWR. Fumarate Tia, is permanently looking for improving the existing systems of instrumentation with the aim of reduction of the dosimetry during the maintenance services, improvement of the liability and lifetime of the equipment, and of course reduction of the duration of the outages in keeping always the same level of quality

Simplified Abrasion Test Methodology for Candidate EVA Glove Lay-Ups

Science.gov (United States)

Rabel, Emily; Aitchison, Lindsay

2015-01-01

During the Apollo Program, space suit outer-layer fabrics were badly abraded after performing just a few extravehicular activities (EVAs). For example, the Apollo 12 commander reported abrasive wear on the boots that penetrated the outer-layer fabric into the thermal protection layers after less than 8 hrs of surface operations. Current plans for the exploration planetary space suits require the space suits to support hundreds of hours of EVA on a lunar or Martian surface, creating a challenge for space suit designers to utilize materials advances made over the last 40 years and improve on the space suit fabrics used in the Apollo Program. Over the past 25 years the NASA Johnson Space Center Crew and Thermal Systems Division has focused on tumble testing as means of simulating wear on the outer layer of the space suit fabric. Most recently, in 2009, testing was performed on 4 different candidate outer layers to gather baseline data for future use in design of planetary space suit outer layers. In support of the High Performance EVA Glove Element of the Next Generation Life Support Project, testing a new configuration was recently attempted in which require 10% of the fabric per replicate of that need in 2009. The smaller fabric samples allowed for reduced per sample cost and flexibility to test small samples from manufacturers without the overhead to have a production run completed. Data collected from this iteration was compared to that taken in 2009 to validate the new test method. In addition the method also evaluated the fabrics and fabric layups used in a prototype thermal micrometeoroid garment (TMG) developed for EVA gloves under the NASA High Performance EVA Glove Project. This paper provides a review of previous abrasion studies on space suit fabrics, details methodologies used for abrasion testing in this particular study, results of the validation study, and results of the TMG testing.

Eva Wohlgemuth / Eva Wohlgemuth ; interv. Tilman Baumgärtel

Index Scriptorium Estoniae

Wohlgemuth, Eva

2006-01-01

1997. a. tehtud intervjuu austria kontseptuaalse kunstniku Eva Wohlgemuthiga (sünd. 1955), kes koos Kathy Rae Huffmaniga dokumenteeris võrgus reisipäevikuna (Interneti projekt "Siberian Deal") sõidu läbi Siberi. Ka projektist "Face Settings". E. Wohlgemuth on loonud varem "Location Sculpture Systems'i" (koos Andreas Baumanniga) ja "Moving Plates Systems'i" ning dokumenteerinud tööd veebisaidil

Reconfigurable Ultra-Low Power Miniaturized EVA Radio, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — EVA radio is an important integral part of lunar missions and beyond. To minimize power consumption and mass of an EVA radio, innovative solutions are needed for the...

European Vegetation Archive (EVA): an integrated database of European vegetation plots

DEFF Research Database (Denmark)

Chytrý, M; Hennekens, S M; Jiménez-Alfaro, B

2015-01-01

vegetation- plot databases on a single software platform. Data storage in EVA does not affect on-going independent development of the contributing databases, which remain the property of the data contributors. EVA uses a prototype of the database management software TURBOVEG 3 developed for joint management......The European Vegetation Archive (EVA) is a centralized database of European vegetation plots developed by the IAVS Working Group European Vegetation Survey. It has been in development since 2012 and first made available for use in research projects in 2014. It stores copies of national and regional...... data source for large-scale analyses of European vegetation diversity both for fundamental research and nature conservation applications. Updated information on EVA is available online at http://euroveg.org/eva-database....

Crosscutting Development- EVA Tools and Geology Sample Acquisition

Science.gov (United States)

2011-01-01

Exploration to all destinations has at one time or another involved the acquisition and return of samples and context data. Gathered at the summit of the highest mountain, the floor of the deepest sea, or the ice of a polar surface, samples and their value (both scientific and symbolic) have been a mainstay of Earthly exploration. In manned spaceflight exploration, the gathering of samples and their contextual information has continued. With the extension of collecting activities to spaceflight destinations comes the need for geology tools and equipment uniquely designed for use by suited crew members in radically different environments from conventional field geology. Beginning with the first Apollo Lunar Surface Extravehicular Activity (EVA), EVA Geology Tools were successfully used to enable the exploration and scientific sample gathering objectives of the lunar crew members. These early designs were a step in the evolution of Field Geology equipment, and the evolution continues today. Contemporary efforts seek to build upon and extend the knowledge gained in not only the Apollo program but a wealth of terrestrial field geology methods and hardware that have continued to evolve since the last lunar surface EVA. This paper is presented with intentional focus on documenting the continuing evolution and growing body of knowledge for both engineering and science team members seeking to further the development of EVA Geology. Recent engineering development and field testing efforts of EVA Geology equipment for surface EVA applications are presented, including the 2010 Desert Research and Technology Studies (Desert RATs) field trial. An executive summary of findings will also be presented, detailing efforts recommended for exotic sample acquisition and pre-return curation development regardless of planetary or microgravity destination.

Asteroid Redirect Crewed Mission Space Suit and EVA System Architecture Trade Study

Science.gov (United States)

Blanco, Raul A.; Bowie, Jonathan T.; Watson, Richard D.; Sipila, Stephanie A.

2014-01-01

The Asteroid Redirect Crewed Mission (ARCM) requires a Launch/Entry/Abort (LEA) suit capability and short duration Extra Vehicular Activity (EVA) capability for Orion. The EVAs will involve a two-person crew for approximately four hours. Currently, two EVAs are planned with one contingency EVA in reserve. Providing this EVA capability is very challenging due to system level constraints and a new and unknown environment. The goal of the EVA architecture for ARCM is one that builds upon previously developed technologies and lessons learned, and that accomplishes the ARCM mission while providing a stepping stone to future missions and destinations. The primary system level constraints are to 1) minimize system mass and volume and 2) minimize the interfacing impacts to the baseline Orion design. In order to minimize the interfacing impacts and to not perturb the baseline Orion schedule, the concept of adding "kits" to the baseline system is proposed. These kits consist of: an EVA kit (converts LEA suit to EVA suit), EVA Servicing and Recharge Kit (provides suit consumables), the EVA Tools, Translation Aids & Sample Container Kit (the tools and mobility aids to complete the tasks), the EVA Communications Kit (interface between the EVA radio and the MPCV), and the Cabin Repress Kit (represses the MPCV between EVAs). This paper will focus on the trade space, analysis, and testing regarding the space suit (pressure garment and life support system). Historical approaches and lessons learned from all past EVA operations were researched. Previous and current, successfully operated EVA hardware and high technology readiness level (TRL) hardware were evaluated, and a trade study was conducted for all possible pressure garment and life support options. Testing and analysis was conducted and a recommended EVA system architecture was proposed. Pressure garment options that were considered for this mission include the currently in-use ISS EVA Mobility Unit (EMU), all variations of

Development of an EVA systems cost model. Volume 2: Shuttle orbiter crew and equipment translation concepts and EVA workstation concept development and integration

Science.gov (United States)

1975-01-01

EVA crewman/equipment translational concepts are developed for a shuttle orbiter payload application. Also considered are EVA workstation systems to meet orbiter and payload requirements for integration of workstations into candidate orbiter payload worksites.

Collaborative Human Engineering Work in Space Exploration Extravehicular Activities (EVA)

Science.gov (United States)

DeSantis, Lena; Whitmore, Mihriban

2007-01-01

A viewgraph presentation on extravehicular activities in space exploration in collaboration with other NASA centers, industries, and universities is shown. The topics include: 1) Concept of Operations for Future EVA activities; 2) Desert Research and Technology Studies (RATS); 3) Advanced EVA Walkback Test; 4) Walkback Subjective Results; 5) Integrated Suit Test 1; 6) Portable Life Support Subsystem (PLSS); 7) Flex PLSS Design Process; and 8) EVA Information System; 9)

Instrument ampersand controls section (IA) improvements

International Nuclear Information System (INIS)

Kramer, C.; Paul, J.

1993-01-01

This portion of the panel session briefly delineates improvements in the Instrument and Controls (IA) Section over the past few years. These improvements are listed briefly in summary form. The status of publication of the IA Section of AG-1 is reviewed

A Novel Recombinant Enterovirus Type EV-A89 with Low Epidemic Strength in Xinjiang, China.

Science.gov (United States)

Fan, Qin; Zhang, Yong; Hu, Lan; Sun, Qiang; Cui, Hui; Yan, Dongmei; Sikandaner, Huerxidan; Tang, Haishu; Wang, Dongyan; Zhu, Zhen; Zhu, Shuangli; Xu, Wenbo

2015-12-21

Enterovirus A89 (EV-A89) is a novel member of the EV-A species. To date, only one full-length genome sequence (the prototype strain) has been published. Here, we report the molecular identification and genomic characterization of a Chinese EV-A89 strain, KSYPH-TRMH22F/XJ/CHN/2011, isolated in 2011 from a contact of an acute flaccid paralysis (AFP) patient during AFP case surveillance in Xinjiang China. This was the first report of EV-A89 in China. The VP1 coding sequence of this strain demonstrated 93.2% nucleotide and 99.3% amino acid identity with the EV-A89 prototype strain. In the P2 and P3 regions, the Chinese EV-A89 strain demonstrated markedly higher identity than the prototype strains of EV-A76, EV-A90, and EV-A91, indicating that one or more recombination events between EV-A89 and these EV-A types might have occurred. Long-term evolution of these EV types originated from the same ancestor provides the spatial and temporal circumstances for recombination to occur. An antibody sero-prevalence survey against EV-A89 in two Xinjiang prefectures demonstrated low positive rates and low titres of EV-A89 neutralization antibody, suggesting limited range of transmission and exposure to the population. This study provides a solid foundation for further studies on the biological and pathogenic properties of EV-A89.

CETA truck and EVA restraint system

Science.gov (United States)

Beals, David C.; Merson, Wayne R.

1991-01-01

The Crew Equipment Translation Aid (CETA) experiment is an extravehicular activity (EVA) Space Transportation System (STS) based flight experiment which will explore various modes of transporting astronauts and light equipment for Space Station Freedom (SSF). The basic elements of CETA are: (1) two 25 foot long sections of monorail, which will be EVA assembled in the STS cargo bay to become a single 50 ft. rail called the track; (2) a wheeled baseplate called the truck which rolls along the track and can accept three cart concepts; and (3) the three carts which are designated manual, electric, and mechanical. The three carts serve as the astronaut restraint and locomotive interfaces with the track. The manual cart is powered by the astronaut grasping the track's handrail and pulling himself along. The electric cart is operated by an astronaut turning a generator which powers the electric motor and drives the cart. The mechanical cart is driven by a Bendix type transmission and is similar in concept to a man-propelled railroad cart. During launch and landing, the truck is attached to the deployable track by means of EVA removable restraint bolts and held in position by a system of retractable shims. These shims are positioned on the exterior of the rail for launch and landing and rotate out of the way for the duration of the experiment. The shims are held in position by strips of Velcro nap, which rub against the sides of the shim and exert a tailored force. The amount of force required to rotate the shims was a major EVA concern, along with operational repeatability and extreme temperature effects. The restraint system was tested in a thermal-vac and vibration environment and was shown to meet all of the initial design requirements. Using design inputs from the astronauts who will perform the EVA, CETA evolved through an iterative design process and represented a cooperative effort.

Influence of the association of the EVA and NBR on the characteristics of modified bitumen

Science.gov (United States)

Bensaada, A.; Soudani, K.; Haddadi, S.; Saoula, S.

2015-03-01

Durability and the performance of pavement depend mainly on the characteristics of materials which change over time like all other organic substances. They are subject to significant changes due to environmental conditions during the different phases of use. In the present work we investigated experimentally the influence of the association of ethyl vinyl acetate polymer (EVA) with an industrial waste, acrylonitrile-butadiene rubber (NBR) on the modification of bitumen AC 35-50 and its rheological behavior. The incorporation of NBR and EVA in the bitumen improved its intrinsic characteristics (softening point, penetration and ductility). In addition to improving the characteristics of bituminous binders that will affect the durability of bituminous structures, the environment will be preserved by the recycling of industrial waste.

Phase separation and orientation in EVA/polycarbonate

International Nuclear Information System (INIS)

Martins-Franchetti, S.M.; Nunes, S.P.

1988-01-01

Blends of the polycarbonate of bisphenol-A-(PC) with poly(ethylene-co-vinylacetate) (EVA) were prepared by solution casting in different solvents and various proportions. Their behaviours was examined by diferential scanning calorimetry (DSC), X-ray diffraction and u.v. spectrophotometry. The results obtained show that PC and EVA form partially miscible blends. In some cases, birefringence was observed by optical microscopy indicating the occurrence of polymer orientation in the neighbourhood of the interfaces. (author) [pt

EVA Suit Microbial Leakage Investigation

Data.gov (United States)

National Aeronautics and Space Administration — The objective of this project is to collect microbial samples from various EVA suits to determine how much microbial contamination is typically released during...

The properties of neutron shielding and flame retardant of EVA polymer after modified by EB accelerator

Science.gov (United States)

Wang, Guo-hui; He, Man-li; Jiang, Dan-feng; He, Fan; Chang, Shu-quan; Dai, Yao-dong

2017-11-01

According to the requirements for neutron shielding and flame retardant properties of some nuclear devices, a new kind of polymer composite materials based on ethylene and vinyl acetate (EVA) polymer have been studied. EVA is the copolymer of ethylene and vinyl acetate, It can be used as materials for applications due to its flexibility, good processability, and low cost. Insulating EVA can be used for cable sheath, automotive sound damping and many other appication. Boron nitride (BN), zinc borate (ZB), magnesium hydroxide (MH) and EVA consisted the compounds with the properties of neutron shielding and flame retardant. With increasing of the contents of BN and ZB, the neutron shielding performance of materials increased up to 33.08%. With the increasing contents of MH and ZB as flame retardant, oxygen index of material have been improved. The elongation at break and tensile strength of material decreased with the increasing of filler powders. Sheet E was chosen and modified by electron beam accelerator in different doses. After modification by electron beam irradiation the sheets showed varying degrees of transformation in the OI, neutron shielding rate and mechanical properties.

Thermal processing of EVA encapsulants and effects of formulation additives

Energy Technology Data Exchange (ETDEWEB)

Pern, F.J.; Glick, S.H. [National Renewable Energy Lab., Golden, CO (United States)

1996-05-01

The authors investigated the in-situ processing temperatures and effects of various formulation additives on the formation of ultraviolet (UV) excitable chromophores, in the thermal lamination and curing of ethylene-vinyl acetate (EVA) encapsulants. A programmable, microprocessor-controlled, double-bag vacuum laminator was used to study two commercial as formulated EVA films, A9918P and 15295P, and solution-cast films of Elvaxrm (EVX) impregnated with various curing agents and antioxidants. The results show that the actual measured temperatures of EVA lagged significantly behind the programmed profiles for the heating elements and were affected by the total thermal mass loaded inside the laminator chamber. The antioxidant Naugard P{trademark}, used in the two commercial EVA formulations, greatly enhances the formation of UV-excitable, short chromophores upon curing, whereas other tested antioxidants show little effect. A new curing agent chosen specifically for the EVA formulation modification produces little or no effect on chromophore formation, no bubbling problems in the glass/EVX/glass laminates, and a gel content of {approximately}80% when cured at programmed 155{degrees}C for 4 min. Also demonstrated is the greater discoloring effect with higher concentrations of curing-generated chromophores.

An improved instrument setpoint control program

International Nuclear Information System (INIS)

Cash, J.S. Jr.; George, R.T.; Kincaid, S.C.

1991-01-01

Instrument setpoints have a definite and often significant impact on plant safety, reliability, and availability. Although typically overshadowed by plant design, modification, and physical change activities, instrument setpoints can alter plant status and system operating characteristics just as significantly. Recognizing the need for a formal program that provides configuration control of instrument setpoints, provides a readily accessible and clearly documented basis for instrument setpoints, and integrates and coordinates operations, engineering, and maintenance activities that influence the basis for instrument setpoints, Philadelphia Electric Company (PECo) is developing an Improved Instrument Setpoint Control Program (IISCP) that incorporates current industry guidance and practices and state-of-the-art information systems technology. The IISCP was designed around PECo's then existing business processes for setpoint control, determination, and maintenance. A task force representing the various constituencies from both plants and the engineering and services organizations were formed to identify objectives and design features for the IISCP. Utilizing industry standards and guidance, regulatory documents, the experiences and good practices obtained from other utilities, and PECo's nuclear group strategies, objectives, and goals, specific objectives were identified to enhance the business processes

European Vegetation Archive (EVA)

NARCIS (Netherlands)

Chytrý, Milan; Hennekens, S.M.; Jiménez-Alfaro, Borja; Schaminée, J.H.J.; Haveman, Rense; Janssen, J.A.M.

2016-01-01

The European Vegetation Archive (EVA) is a centralized database of European vegetation plots developed by the IAVS Working Group European Vegetation Survey. It has been in development since 2012 and first made available for use in research projects in 2014. It stores copies of national and

Radiation Effects on Mechanical Properties of LDPE/EVA blend

International Nuclear Information System (INIS)

Lee, Chung; Kim, Ki Yup; Im, Don Sun; Ryu, Boo Hyung

2005-01-01

Restricted properties and a limited use of homopolymers alone, have given rise to an exploration of composites, copolymers, blends, etc. Copolymers such as poly(ethylene-co-vinyl acetate) (EVA), poly(ethylene-co-butyl acrylate), poly(ethylene-co-ethyl acrylate) (EEA) have wide usages in different industry. Among the numerous ethylene copolymers, due to its wide range of properties depending on its vinyl acetate content, EVA has become one of the most useful copolymers in the electrical industry as a cable insulator, and in many other industries as a hot melt adhesive, a coating, etc. Several works looked at the influence of gamma rays on polymers. Zhang et al have blended EVA with PE because crosslinked PE has a low flexibility for use as a cable insulation. It was reported that the blend showed have a better elongation, flexibility and heat aging effect than PE, but its hardness and softening point were lower. In this study, the radiation degradation of LDPE/EVA blends as a function of the vinyl acetate contents was investigated by using TGA, gelation and elongation

Spectroscopic, scanning laser OBIC, and I-V/QE characterizations of browned EVA solar cells

Energy Technology Data Exchange (ETDEWEB)

Pern, F.J. [National Renewable Energy Lab., Golden, CO (United States); Eisgruber, I.L. [Materials Research Group, Inc., Wheat Ridge, CO (United States); Micheels, R.H. [Polestar Technologies, Inc., Needham Hts, MA (United States)

1996-05-01

The effects of ethylene-vinyl acetate (EVA) discoloration due to accelerated field or laboratory exposure on the encapsulated silicon (Si) solar cells or EVA/glass laminates were characterized quantitatively by using non-invasive, non-destructive ultraviolet-visible (UV-vis) spectrophotometry, spectrocolorimetry, spectrofluorometry, scanning laser OBIC (optical beam induced current) spectroscopy, and current-voltage (I-V) and quantum efficiency (QE) measurements. The results show that the yellowness index (YI) measured directly over the AR-coated solar cells under the glass superstrate increased from the range of -80 to -90 to the range of -20 to 15 as the EVA changed from clear to brown. The ratio of two fluorescence emission peak areas generally increased from 1.45 to 5.69 as browning increased, but dropped to 4.21 on a darker EVA. For a solar cell with brown EVA in the central region, small-area grating QE measurements and scanning laser OBIC analysis between the brown and clear EVA regions showed that the quantum efficiency loss at 633 nm was 42%-48% of the loss at 488 nm, due to a reduced decrease of transmittance in browned EVA at the longer wavelengths. The portion of the solar cell under the browned EVA showed a decrease of {approximately}36% in efficiency, as compared to the cell efficiency under clear EVA. Transmittance loss at 633 nm was 38% of the loss at 488 nm for a light yellow-brown EVA/glass laminate that showed a small increase of 10 in the yellowness index.

Compiling a Comprehensive EVA Training Dataset for NASA Astronauts

Science.gov (United States)

Laughlin, M. S.; Murry, J. D.; Lee, L. R.; Wear, M. L.; Van Baalen, M.

2016-01-01

Training for a spacewalk or extravehicular activity (EVA) is considered hazardous duty for NASA astronauts. This activity places astronauts at risk for decompression sickness as well as various musculoskeletal disorders from working in the spacesuit. As a result, the operational and research communities over the years have requested access to EVA training data to supplement their studies.

EVA measure and ability of the firm to create shareholder wealth

Directory of Open Access Journals (Sweden)

Gabriela Chmelíková

2007-01-01

Full Text Available This paper is devoted to the possibilities of Economic Value Added index usage in the conditions of Czech food-processing industry and is trying to provide independent empirical evidence on the indicator’s qualities. The EVA proponents attach to it a superiority compared to other common performance measures. The aim of this article is to investigate the relationship between Economic Value Added, traditional performance measures (ROA and ROE and ability of creation of shareholder wealth for food-processing firms in the Czech Republic. The way of intended comparison is not dissimilar to the main world studies, which are quoted in this paper. A critical point of the EVA’s application in the conditions of Czech economy is a lack of good quality information from capital market, which at the same time, serve as an exogenous criterion for assessing the quality of the examined measures in the mentioned studies. In the absence of quality capital market information, a criterion for assessing the information content of performance measures suitable for conditions of Czech economy is developed in this paper. This also shows how to circumvent the handicap of the available data.The intent of this article is fulfilled by providing a simple regression test of the hypothesis, that the EVA measure is more associated with improved shareholder wealth than traditional performance measures ROA and ROE. The results of regression analysis show higher quality information content of EVA indicator in the relationship to the ability of shareholder wealth creation than traditional performance measures. This fact supports the tested hypothesis as well as the conclusions of corporate finance theory, that from the theoretical point of view EVA is seen as a superior performance metric.

Bagatellid : Maailm / Nele-Eva Steinfeld

Index Scriptorium Estoniae

Steinfeld, Nele-Eva

2009-01-01

Muusikasõnumeid maailmast: Arvo Pärdi Neljanda sümfoonia maailma esiettekanne Los Angeleses. Felix Mendelssohni 200. sünniaastapäeva eel avastati helilooja kadunud teoseid. Esa-Pekka Salonen lahkub Los Angelese Filharmoonikute juurest

TEJAS - TELEROBOTICS/EVA JOINT ANALYSIS SYSTEM VERSION 1.0

Science.gov (United States)

Drews, M. L.

1994-01-01

The primary objective of space telerobotics as a research discipline is the augmentation and/or support of extravehicular activity (EVA) with telerobotic activity; this allows increased emplacement of on-orbit assets while providing for their "in situ" management. Development of the requisite telerobot work system requires a well-understood correspondence between EVA and telerobotics that to date has been only partially established. The Telerobotics/EVA Joint Analysis Systems (TEJAS) hypermedia information system uses object-oriented programming to bridge the gap between crew-EVA and telerobotics activities. TEJAS Version 1.0 contains twenty HyperCard stacks that use a visual, customizable interface of icon buttons, pop-up menus, and relational commands to store, link, and standardize related information about the primitives, technologies, tasks, assumptions, and open issues involved in space telerobot or crew EVA tasks. These stacks are meant to be interactive and can be used with any database system running on a Macintosh, including spreadsheets, relational databases, word-processed documents, and hypermedia utilities. The software provides a means for managing volumes of data and for communicating complex ideas, relationships, and processes inherent to task planning. The stack system contains 3MB of data and utilities to aid referencing, discussion, communication, and analysis within the EVA and telerobotics communities. The six baseline analysis stacks (EVATasks, EVAAssume, EVAIssues, TeleTasks, TeleAssume, and TeleIssues) work interactively to manage and relate basic information which you enter about the crew-EVA and telerobot tasks you wish to analyze in depth. Analysis stacks draw on information in the Reference stacks as part of a rapid point-and-click utility for building scripts of specific task primitives or for any EVA or telerobotics task. Any or all of these stacks can be completely incorporated within other hypermedia applications, or they can be

The Potential of Wearable Sensor Technology for EVA Glove Ergonomic Evaluation

Science.gov (United States)

Reid, Christopher R.; McFarland, Shane; Norcross, Jason R.; Rajulu, Sudhakar

2014-01-01

Injuries to the hands are common among astronauts who train for extravehicular activity (EVA). Many of these injuries refer to the gloves worn during EVA as the root cause. While pressurized, the bladder and outer material of these gloves restrict movement and create pressure points while performing tasks, sometimes resulting in pain, muscle fatigue, abrasions, and occasionally a more severe injury, onycholysis (fingernail delamination). The most common injury causes are glove contact (pressure point/rubbing), ill-fitting gloves, and/or performing EVA tasks in pressurized gloves. A brief review of the Lifetime Surveillance of Astronaut Health's injury database reveals over 57% of the total injuries to the upper extremities during EVA training occurred either to the metacarpophalangeal (MCP) joint, fingernail, or the fingertip. Twenty-five of these injuries resulted in a diagnosis of onycholysis

Acoustic Behavior of Subfloor Lightweight Mortars Containing Micronized Poly (Ethylene Vinyl Acetate) (EVA).

Science.gov (United States)

Brancher, Luiza R; Nunes, Maria Fernanda de O; Grisa, Ana Maria C; Pagnussat, Daniel T; Zeni, Mára

2016-01-15

This paper aims to contribute to acoustical comfort in buildings by presenting a study about the polymer waste micronized poly (ethylene vinyl acetate) (EVA) to be used in mortars for impact sound insulation in subfloor systems. The evaluation method included physical, mechanical and morphological properties of the mortar developed with three distinct thicknesses designs (3, 5, and 7 cm) with replacement percentage of the natural aggregate by 10%, 25%, and 50% EVA. Microscopy analysis showed the surface deposition of cement on EVA, with preservation of polymer porosity. The compressive creep test estimated long-term deformation, where the 10% EVA sample with a 7 cm thick mortar showed the lowest percentage deformation of its height. The impact noise test was performed with 50% EVA samples, reaching an impact sound insulation of 23 dB when the uncovered slab was compared with the 7 cm thick subfloor mortar. Polymer waste addition decreased the mortar compressive strength, and EVA displayed characteristics of an influential material to intensify other features of the composite.

Acoustic Behavior of Subfloor Lightweight Mortars Containing Micronized Poly (Ethylene Vinyl Acetate (EVA

Directory of Open Access Journals (Sweden)

Luiza R. Brancher

2016-01-01

Full Text Available This paper aims to contribute to acoustical comfort in buildings by presenting a study about the polymer waste micronized poly (ethylene vinyl acetate (EVA to be used in mortars for impact sound insulation in subfloor systems. The evaluation method included physical, mechanical and morphological properties of the mortar developed with three distinct thicknesses designs (3, 5, and 7 cm with replacement percentage of the natural aggregate by 10%, 25%, and 50% EVA. Microscopy analysis showed the surface deposition of cement on EVA, with preservation of polymer porosity. The compressive creep test estimated long-term deformation, where the 10% EVA sample with a 7 cm thick mortar showed the lowest percentage deformation of its height. The impact noise test was performed with 50% EVA samples, reaching an impact sound insulation of 23 dB when the uncovered slab was compared with the 7 cm thick subfloor mortar. Polymer waste addition decreased the mortar compressive strength, and EVA displayed characteristics of an influential material to intensify other features of the composite.

Human Research Program Human Health Countermeasures Element Extravehicular Activity (EVA) Risk Standing Review Panel (SRP)

Science.gov (United States)

Norfleet, William; Harris, Bernard

2009-01-01

The Extravehicular Activity (EVA) Risk Standing Review Panel (SRP) was favorably impressed by the operational risk management approach taken by the Human Research Program (HRP) Integrated Research Plan (IRP) to address the stated life sciences issues. The life sciences community at the Johnson Space Center (JSC) seems to be focused on operational risk management. This approach is more likely to provide risk managers with the information they need at the time they need it. Concerning the information provided to the SRP by the EVA Physiology, Systems, and Performance Project (EPSP), it is obvious that a great deal of productive activity is under way. Evaluation of this information was hampered by the fact that it often was not organized in a fashion that reflects the "Gaps and Tasks" approach of the overall Human Health Countermeasures (HHC) effort, and that a substantial proportion of the briefing concerned subjects that, while interesting, are not part of the HHC Element (e.g., the pressurized rover presentation). Additionally, no information was provided on several of the tasks or how they related to work underway or already accomplished. This situation left the SRP having to guess at the efforts and relationship to other elements, and made it hard to easily map the EVA Project efforts currently underway, and the data collected thus far, to the gaps and tasks in the IRP. It seems that integration of the EPSP project into the HHC Element could be improved. Along these lines, we were concerned that our SRP was split off from the other participating SRPs at an early stage in the overall agenda for the meeting. In reality, the concerns of EPSP and other projects share much common ground. For example, the commonality of the concerns of the EVA and exercise physiology groups is obvious, both in terms of what reduced exercise capacity can do to EVA capability, and how the exercise performed during an EVA could contribute to an overall exercise countermeasure prescription.

Innovative EVA Glove Exoskeleton, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Dexterous performance degradation resulting from donning an extra-vehicular activity (EVA) glove limits the capability of astronauts to perform certain tasks in...

A imagem de Eva : o governo peronista

OpenAIRE

Souza, Renata A. Melki de

2016-01-01

Esta dissertação tem como objetivo a análise da imagem de Eva Perón, entre de 1939 a 1955 e utiliza como fontes de pesquisa a imprensa, brasileira e argentina, e a biografia “A Razão de minha Vida”, publicada em 1951, em Buenos Aires. Outro fim desta pesquisa é questionar qual foi o papel de Eva no regime peronista, qual o foco e o olhar quando se fala da primeira-dama argentina e quais os direcionamentos que levaram a imprensa a ter esta posição, além de mostrar como a Argenti...

Bagatellid : Maailm / Nele-Eva Steinfeld

Index Scriptorium Estoniae

Steinfeld, Nele-Eva

2010-01-01

Muusikasõnumeid maailmast: Paavo Järvi lahkub Cincinnati sümfooniaorkestri peadirigendi ametist. Läti metsosopran Elina Garanca pälvis tunnustust. Seiji Ozawa lahkub kontserdielust kuueks kuuks. Fryderyk Chopini 200nda sünniaastapäeva tähistamisest

Underwater EVA training in the WETF with astronaut Robert L. Stewart

Science.gov (United States)

1983-01-01

Underwater extravehicular activity (EVA) training in the weightless environment training facility (WETF) with astronaut Robert L. Stewart. Stewart is simulating a planned EVA using the mobile foot restraint device and a one-G version of the Canadian-built remote manipulator system.

Energy saving certificates: an improved instrument

International Nuclear Information System (INIS)

2016-02-01

This report first presents Energy Saving Certificates as one of among other instruments aimed at reducing energy consumption, and indicates how the French consumer is concerned. The benefits of this instrument are outlined: low cost, autonomy, awareness-raising, quantitative assessment of achieved energy savings. Its objectives and results since its creation in 2006 are commented, and the report outlines that this type of instrument is spreading over Europe. The authors show that its efficiency has been improved along the years due to a periodic review of standardised operation sheets, a simplification of the declaration, and an optimization of related programmes. Besides, targets have been better identified. The report outlines that assessment and controls must however be strengthened in order to reduce financial risks and potential drifts. Answers to this report by the concerned minister and ADEME are provided

A evasão no ensino superior brasileiro Higher education institutions' evasion

Directory of Open Access Journals (Sweden)

Roberto Leal Lobo e Silva Filho

2007-12-01

Full Text Available Neste trabalho a evasão nas instituições de educação superior no Brasil é estudada com base em dados oficiais, em que se incluem análises regionais dos índices da evasão anual média e da evasão por tipo de instituição. Verifica-se uma correlação negativa entre os índices de evasão e a demanda por curso. Com vistas a possibilitar comparações, são apresentados dados internacionais que indicam que a evasão no Brasil não difere muito das médias internacionais.In this work, evasion in institutions of higher education is studied, based on official data, including regional analyses of annual mean evasion rates and evasion rates by type of institution. It was verified that there is a negative correlation between evasion rates an demand for undergraduate courses. Comparisons with international data are presented, pointing out that the evasion rates in Brazil do not differ a lot from those of other countries.

Vabariigi presidendi iseseisvuspäeva kõne / Toomas Hendrik Ilves

Index Scriptorium Estoniae

Ilves, Toomas Hendrik, 1953-

2011-01-01

Presidendi kõne Eesti Vabariigi 93. aastapäeva pidulikul kontserdil Estonias 24. veebruaril 2011. aastal. Vt. ka juhtkiri lk. 2: Isetehtud Eesti. Õhtulehes kommenteerivad Rainer Kattel, Olev Remsu, Agu Uudelepp ja Vitali Belobrovtsev. Õhtulehes vt. ka juhtkiri: Vaikne ja rahulik Põhjamaa? Äripäevas vt. ka juhtkiri lk. 2: Rohkem enesekindlust, rohkem eneseusaldust!

Použití ukazatele EVA v konkrétním podniku

Directory of Open Access Journals (Sweden)

Lenka Zemánková

2013-11-01

Full Text Available Purpose of the article: This article is an illustrative case study describing usage of EVA indicator in chosen specific company. Key part of the article deals with application of EVA indicator in company. It consists of procedure how to adjust accounting data into required form and determine weight costs of capital. Then there is calculation of EVA indicator and other indicators based on it. Last part is comparison of results. Methodology/methods: The basic method is case study. Its aim is to demonstrate good understanding or causation explanation of particular example. It takes into account the overall context of the problem. Scientific aim: The objective of the article is to come near to theoretical economic procedures and highlight the problematic areas within the practical application of EVA indicator in the business. Next aim is to emphasize the importance of EVA indicator. Findings: This article illustrates some problematic issues that companies may face while calculating EVA indicator. Czech accounting standards do not correspond with international accounting standard methodology known as IFRS for compiling statements. First difficult area was conversion of assets into net operating assets NOA. Then operating profit is modified in respect of so-called unusual costs and revenues. The next issue in calculation of EVA indicator is stating average weight costs on capital. The last area of problems is the time flow of leasing contracts, value of liabilities arising from them and assessing the lifetime of leased property. Conclusions: The article empirically examined the effectiveness of EVA indicator with regard to its relation to the accounting performance indicators. It was proved that although the company reported financial health within the frame of financial analysis, it gave owners only slightly increasing economic value added. The article points out the need of usege of EVA indicator in corporate practice.

Bond-girl Eva Green: "Daniel ei ole sugugi halb" / Eva Green ; ref. Viktoria Ladõnskaja

Index Scriptorium Estoniae

Green, Eva

2006-01-01

Ajakirjanikud vaatasid Londonis uut Bondi-filmi "007 : Casino Royale" ja kohtusid pressikonverentsil peaosatäitjatega. Prantsusmaal elav rootsi-alžeeria päritolu näitlejanna Eva Green räägib oma rollist ja koostööst Bondi-kehastaja Daniel Craigiga

Mechanical behavior of recycled lightweight concrete using EVA waste and CDW under moderate temperature

Directory of Open Access Journals (Sweden)

E. Q. R. Santiago

Full Text Available Many benefits can be achieved by using recycled waste as raw material for construction. Some of them are the reduction of the total cost of the construction, the reduction of the consumption of energy and the decrease in the use of natural materials. The construction sector can also incorporate the waste of the other industries, like the waste of the shoes industry, the Ethylene Vinyl Acetate (EVA. EVA aggregate is obtained by cutting off the waste of EVA expanded sheets used to produce insoles and innersoles of the shoes. In this work two types of recycled aggregate were used - construction and demolition waste (CDW and EVA. The aim of this work was to study the influence of the use of these recycled aggregates, as replacement of the natural coarse aggregate, on mechanical behavior of recycled concrete. The experimental program was developed with two w/c ratio: 0.49 and 0.82. Four mixtures with produced with different aggregates substitution rates (0, 50%EVA, 50%CDW and 25%EVA-25%CDW, by volume. Compressive tests were carried out to evaluable the influence of recycled aggregate on strength, elastic modulus and Poisson coefficient. In addition, it was evaluated the effect of the moderate temperatures (50, 70 and 100º C on stress-strain behavior of concretes studied. The results demonstrated that is possible to use the EVA waste and RCD to produces lightweight concrete. The influence of temperature was more significant only on elastic modulus of the recycled concrete with 50%EVA.

Astronaut Dale Gardner holds up for sale sign after EVA

Science.gov (United States)

1984-01-01

Astronaut Dale A. Gardner, having just completed the major portion of his second extravehicular activity (EVA) period in three days, holds up a 'for sale' sign. Astronaut Joseph P. ALlen IV, who also participated in the two EVA's, is reflected in Gardner's helmet visor. A portion of each of two recovered satellites is in the lower right corner, with Westar nearer Discovery's aft.

Role of EVA viscoelastic properties in the protective performance of a sport shoe: computational studies.

Science.gov (United States)

Even-Tzur, Nurit; Weisz, Ety; Hirsch-Falk, Yifat; Gefen, Amit

2006-01-01

Modern sport shoes are designed to attenuate mechanical stress waves, mainly through deformation of the viscoelastic midsole which is typically made of ethylene vinyl acetate (EVA) foam. Shock absorption is obtained by flow of air through interconnected air cells in the EVA during shoe deformation under body-weight. However, when the shoe is overused and air cells collapse or thickness of the EVA is reduced, shock absorption capacity may be affected, and this may contribute to running injuries. Using lumped system and finite element models, we studied heel pad stresses and strains during heel-strike in running, considering the viscoelastic constitutive behavior of both the heel pad and EVA midsole. In particular, we simulated wear cases of the EVA, manifested in the modeling by reduced foam thickness, increased elastic stiffness, and shorter stress relaxation with respect to new shoe conditions. Simulations showed that heel pad stresses and strains were sensitive to viscous damping of the EVA. Wear of the EVA consistently increased heel pad stresses, and reduced EVA thickness was the most influential factor, e.g., for a 50% reduction in thickness, peak heel pad stress increased by 19%. We conclude that modeling of the heel-shoe interaction should consider the viscoelastic properties of the tissue and shoe components, and the age of the studied shoe.

Utilization of ISS to Develop and Test Operational Concepts and Hardware for Low-Gravity Terrestrial EVA

Science.gov (United States)

Gast, Matthew A.

2010-01-01

NASA has considerable experience in two areas of Extravehicular Activities (EVA). The first can be defined as microgravity, orbital EVAs. This consists of everything done in low Earth orbit (LEO), from the early, proof of concept EVAs conducted during the Gemini program of the 1960s, to the complex International Space Station (ISS) assembly tasks of the first decade of the 21st century. The second area of expertise is comprised of those EVAs conducted on the lunar surface, under a gravitational force one-sixth that of Earth. This EVA expertise encapsulates two extremes - microgravity and Earthlike gravitation - but is insufficient as humans expand their exploration purview, most notably with respect to spacewalks conducted on very low-gravity bodies, such as near- Earth objects (NEO) and the moons of Mars. The operational and technical challenges of this category of EVA have yet to be significantly examined, and as such, only a small number of operational concepts have been proposed thus far. To ensure mission success, however, EVA techniques must be developed and vetted to allow the selection of operational concepts that can be utilized across an assortment of destinations whose physical characteristics vary. This paper examines the utilization of ISS-based EVAs to test operational concepts and hardware in preparation for a low-gravity terrestrial EVA. While the ISS cannot mimic some of the fundamental challenges of a low-gravity terrestrial EVA - such as rotation rate and surface composition - it may be the most effective test bed available.

Next Generation Life Support: High Performance EVA Glove

Science.gov (United States)

Walsh, Sarah K.

2015-01-01

The objectives of the High Performance EVA Glove task are to develop advanced EVA gloves for future human space exploration missions and generate corresponding standards by which progress may be quantitatively assessed. New technologies and manufacturing techniques will be incorporated into the new gloves to address finger and hand mobility, injury reduction and durability in nonpristine environments. Three prototypes will be developed, each focusing on different technological advances. A robotic assist glove will integrate a powered grasping system into the current EVA glove design to reduce astronaut hand fatigue and hand injuries. A mechanical counter pressure (MCP) glove will be developed to further explore the potential of MCP technology and assess its capability for countering the effects of vacuum or low pressure environments on the body by using compression fabrics or materials to apply the necessary pressure. A gas pressurized glove, incorporating new technologies, will be the most flight-like of the three prototypes. Advancements include the development and integration of aerogel insulation, damage sensing components, dust-repellant coatings, and dust tolerant bearings.

Analysis of the mechanical properties and characterization by solid state 13 C NMR of recycled EVA copolymer/silica composites

International Nuclear Information System (INIS)

Stael, Giovanni Chaves; Rocha, Marisa Cristina Guimaraes

2005-01-01

The incorporation of micrometer sized silica particles on poly (ethylene-co-vinyl acetate) - EVA - residues from the footwear industry was evaluated. The effects of the processing parameters - temperature and mixing ratio - on the mechanical behavior of molded plates of neat recycled EVA and EVA/silica composites were also investigated. The mechanical properties measured by the tensile test, the fractographic analysis by scanning electron microscopy (SEM), and the 13 C Nuclear Magnetic Resonance (NMR) showed a reduced EVA to silica compatibility. Therefore, incorporation of untreated silica to recycled EVA copolymer produced a slight decrease on the mechanical performance of EVA/silica composites in respect to neat EVA copolymer. The NMR analysis also shows that the crosslinking process on recycled EVA may be occurring at the carbonyl group. (author)

Initial Work Toward a Robotically Assisted EVA Glove

Science.gov (United States)

Rogers, J.; Peters, B.; McBryan, E.; Laske, E.

2016-01-01

The Space Suit RoboGlove is a device designed to provide additional grasp strength or endurance for an EVA crew member since gloved hand performance is a fraction of what the unencumbered human hand can achieve. There have been past efforts to approach this problem by employing novel materials and construction techniques to the glove design, as well as integrating powered assistance devices. This application of the NASA/GM RoboGlove technology uses a unique approach to integrate the robotic actuators and sensors into a Phase VI EVA glove. This design provides grasp augmentation to the glove user while active, but can also function as a normal glove when disabled. Care was taken to avoid adding excessive bulk to the glove or affecting tactility by choosing low-profile sensors and extrinsically locating the actuators. Conduits are used to guide robotic tendons from linear actuators, across the wrist, and to the fingers. The second generation of the SSRG includes updated electronics, sensors, and actuators to improve performance. The following discusses the electromechanical design, softgoods integration, and control system of the SSRG. It also presents test results from the first integration of a powered mobility element onto a space suit, the NASA Mark III. Early results show that sensor integration did not impact tactile feedback in the glove and the actuators show potential for reduction in grasp fatigue over time.

Melting and crystallization behavior of partially miscible high density polyethylene/ethylene vinyl acetate copolymer (HDPE/EVA) blends

Energy Technology Data Exchange (ETDEWEB)

Chen, Yang; Zou, Huawei, E-mail: hwzou@163.com; Liang, Mei, E-mail: liangmeiww@163.com; Cao, Ya

2014-06-01

Highlights: • HDPE/EVA blends undergo phase separation, making it an interesting topic to investigate the relationships between miscibility and crystallization. • Influences from blending on the crystallization kinetics were successfully evaluated by Friedman's and Khanna's method. • X-ray diffraction studies revealed that blending with EVA the unit length of the unit cell of the HDPE increases. • Thermal fractionation method was successfully used to characterize the co-crystallization in HDPE/EVA blends. - Abstract: Crystallization studies on HDPE/EVA blends and the individual components were performed with differential scanning calorimetry (DSC) technique and wide angle X-ray scattering (WAXS). Influences of blending on the crystallization kinetics of each component in HDPE/EVA mixture were evaluated by Friedman's activation energy and Khanna's crystallization rate coefficient (CRC). The addition of more HDPE into the EVA matrix causes more heterogeneous nucleation while the addition of EVA would hinder the nucleation of HDPE at the beginning of cooling process. Inter-molecular interaction in the melt facilitated the crystallization of both EVA and HDPE components. X-ray diffraction studies revealed that HDPE and EVA have orthorhombic unit cell. Blending with EVA did not affect the crystalline structure of HDPE. In addition, a little shift of (1 1 0), (2 0 0) and (0 2 0) crystalline peaks toward lower 2θ values of samples indicating a little increase of unit cell parameters of the orthorhombic unit cell of polyethylene. Thermal fractionation results showed that co-crystallization took place in the HDPE/EVA blend. All those results indicated that the polymer pair we choose was partially miscible.

Analysis of the mechanical properties and characterization by solid state 13C NMR of recycled EVA copolymer/silica composites

Directory of Open Access Journals (Sweden)

Giovanni Chaves Stael

2005-09-01

Full Text Available The incorporation of micrometer sized silica particles on poly (ethylene-co-vinyl acetate - EVA - residues from the footwear industry was evaluated. The effects of the processing parameters - temperature and mixing ratio - on the mechanical behavior of molded plates of neat recycled EVA and EVA/silica composites were also investigated. The mechanical properties measured by the tensile test, the fractographic analysis by scanning electron microscopy (SEM, and the 13C Nuclear Magnetic Resonance (NMR showed a reduced EVA to silica compatibility. Therefore, incorporation of untreated silica to recycled EVA copolymer produced a slight decrease on the mechanical performance of EVA/silica composites in respect to neat EVA copolymer. The NMR analysis also shows that the crosslinking process on recycled EVA may be occurring at the carbonyl group.

Software Defined Multiband EVA Radio, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The objective of this research is to propose a reliable, lightweight, programmable, multi-band, multi-mode, miniaturized frequency-agile EVA software defined radio...

High Pressure EVA Glove (HPEG), Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Final Frontier Design's (FFD) High Pressure EVA Glove (HPEG) is a game changing technology enabling future exploration class space missions. The high operating...

Valitsuse 100 päeva üllatused / Kadri Jakobson, Piret Reiljan

Index Scriptorium Estoniae

Jakobson, Kadri, 1970-

2007-01-01

Ilmunud ka: Delovõje Vedomosti 18. juuli lk. 2. Aprillirahutuste ohjamine on toonud valitsusele toetuse, aktsiisi- ja hinnatõus aga ennustavad majandusraskusi. Tabel: Valitsuskoalitsiooni lubadused, teod ja peaministri kommentaarid. Vt. samas: Silmapaistvamad 100 päeva ministrid; Valitsuse 100 päeva positiivsed otsused. Vt. samas: Andrus Saar: valitsuse otsused on pannud käima inflatsiooniralli

Software Defined Multiband EVA Radio, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The objective of Phase 2 is to build a reliable, lightweight, programmable, multi-mode, miniaturized EVA Software Defined Radio (SDR) that supports data telemetry,...

Reconfigurable Power-Aware EVA Radio, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Advanced Extra Vehicular Activity (EVA) radio system is a pivotal technology for the successful support of the International Space Station beyond 2020 and future...

The Power of Love: Rewriting the Romance in Isabel Allende's The House of the Spirits and Eva Luna

Directory of Open Access Journals (Sweden)

Frances Jane P. Abao

2000-12-01

Full Text Available Despite its ongoing popularity with women readers, romantic fiction has traditionally been regarded as an instrument of women's oppression, largely due to its reinforcement and even glorification of sexual stereotypes and bourgeois values. Latin American writer Isabel Allende's novels The House of the Spirits and Eva Luna both contain a number of the elements and conventions of romantic fiction, including distinct similarities to the two acknowledged foundations of this genre: Charlotte Brontë's Jane Eyre and Emily Brontë's Wuthering Heights.However, The House of the Spirits and Eva Luna can also be read as rewritings of the genre of romantic fiction. In these two texts, Isabel Allende appropriates and then reworks certain conventions of romantic fiction in order to portray her notion of "fulfilling egalitarian relationships" between men and women. Nevertheless, despite these feminist revisions, Allende's rewritten romances do retain the "wish-fulfillment" element-or ideal-of romantic fiction, its depiction of women's fantasy of feminine values being appreciated and validated within heterosexual romantic relationships in the real world.

Eva Luna: Writing as History

Directory of Open Access Journals (Sweden)

Lynne Diamond-Nigh

1995-01-01

Full Text Available The Bildungsroman of Eva Luna's development as a writer reflects—in a somewhat fragmented manner—important developments in Latin American literary history. Her personal quest was paralleled by an aesthetic quest, manifested in the trying on and taking off of various genres, literary movements and myths characteristic of Latin America; she even goes so far as to allude explicitly to specific authors and their individual works. Although some of these are simply lightheartedly parodied, others are reworked and reinterpreted in the light of the feminist enterprise of the past twenty-five years. Eva Luna transgresses fundamentally by having an intellectually strong, sexual, nurturing, very feminine protagonist, setting up an initial rupture with the dichotomy so clearly demarcated by Octavio Paz between "the mother and the whore." Four primary categories suggest themselves: myth and the mythic consciousness; magical realism; Boom writers; and then a miscellaneous grouping that subsumes a host of other significant literatures and literary themes: the picaresque, the neo-romantic, novels of the dictators, the ever-present conflict between civilization and barbarism, and testimonial literature.

High Performance EVA Glove Collaboration: Glove Injury Data Mining Effort

Science.gov (United States)

Reid, C. R.; Benson, E.; England, S.; Charvat, J.; Norcross, J. R.; McFarland, S. M.; Rajulu, S.

2015-01-01

Human hands play a significant role during Extravehicular Activity (EVA) missions and Neutral Buoyancy Lab (NBL) training events, as they are needed for translating and performing tasks in the weightless environment. Because of this high frequency usage, hand and arm related injuries are known to occur during EVA and EVA training in the NBL. The primary objectives of this investigation were to: 1) document all known EVA glove related injuries and circumstances of these incidents, 2) determine likely risk factors, and 3) recommend interventions where possible that could be implemented in the current and future glove designs. METHODS: The investigation focused on the discomforts and injuries of U.S. crewmembers who had worn the pressurized Extravehicular Mobility Unit (EMU) spacesuit and experienced 4000 Series or Phase VI glove related incidents during 1981 to 2010 for either EVA ground training or in-orbit flight. We conducted an observational retrospective case-control investigation using 1) a literature review of known injuries, 2) data mining of crew injury, glove sizing, and hand anthropometry databases, 3) descriptive statistical analyses, and finally 4) statistical risk correlation and predictor analyses to better understand injury prevalence and potential causation. Specific predictor statistical analyses included use of principal component analyses (PCA), multiple logistic regression, and survival analyses (Cox proportional hazards regression). Results of these analyses were computed risk variables in the forms of odds ratios (likelihood of an injury occurring given the magnitude of a risk variable) and hazard ratios (likelihood of time to injury occurrence). Due to the exploratory nature of this investigation, we selected predictor variables significant at p=0.15. RESULTS: Through 2010, there have been a total of 330 NASA crewmembers, from which 96 crewmembers performed 322 EVAs during 1981-2010, resulting in 50 crewmembers being injured inflight and 44

Estudo de misturas asfálticas com ligante modificado pelo polímero EVA para pavimentos urbanos de Manaus - AM Study of asphalt mixtures containing a binder modified with EVA polymer for use in urban pavements in Manaus

Directory of Open Access Journals (Sweden)

Daniela M. G. D'Antona

2011-01-01

Full Text Available A presente pesquisa buscou soluções com materiais alternativos visando à construção de pavimentos urbanos para Manaus (AM com maior vida útil e condizente com as suas condições de serviço, em particular, o seu desempenho mecânico frente às temperaturas regionais. Estudou-se o ligante regional, CAP 50/70, misturado com 4% do polímero EVA, e como partícipe em compósitos asfálticos. A incorporação do mencionado polímero teve como objetivo melhorar suas propriedades reológicas e, por conseguinte, o comportamento mecânico desse compósito - concreto asfáltico, empregado como revestimento nas vias urbanas da Capital do Estado do Amazonas. Os ligantes (virgem e modificado foram caracterizados conforme a especificação da ANP e a metodologia Superpave. As misturas asfálticas foram avaliadas pelo ensaio de fluência por compressão axial, com carregamento dinâmico à temperatura de 40 ºC. O material asfáltico modificado com EVA (AMP EVA demonstrou melhores propriedades reológicas ou equivalentes ao asfalto convencional (REMAN, ao longo de todos os ensaios de caracterização. As misturas alternativas compostas com o CAP modificado (SEVA obtiveram desempenho mecânico superior ao de misturas com cimento asfáltico habitualmente comercializado na região (SMAN.In this research we investigated alternative materials to build urban pavements in Manaus, seeking for pavements with longer lifetime for usage and suitable mechanical properties to withstand the local temperatures. The asphaltic mixtures contained a regional binder, namely CAP 50/70, mixed with 4% of EVA polymer. The incorporation of the latter polymer was aimed at improving the rheological properties of asphaltic concrete used in roads in the Amazonas' capital. The asphalt binders (original and modified were characterized in accordance with the ANP (National Petroleum Agency specification and the Superpave methodology. The asphalt mixtures had their mechanical properties

ANALISIS PENGARUH ECONOMIC VALUE ADDED (EVA DAN RASIO KEUANGAN TERHADAP RETURN SAHAM SYARIAH

Directory of Open Access Journals (Sweden)

Lilik Sri Hariani

2010-02-01

Full Text Available This research investigated the simultaneous impact and partial impact of financial ratios (ROA, ROE, EPS and Economic Value-Added (EVA on stock return. One of the four independent variables, that is EVA, are new concepts for measuring financial performance. Explanatory method was used in this research, and the sample was collected using purposive sampling method from Jakarta Islamic Index listed in Bursa Efek Indonesia (BEI, Indonesia Stock Exchange for the period 2005 - 2007. Multiple linear regression was used for the analysis in this research.The result of the analysis shows that all independent variables, that is Return on Assets (ROA, Return on Equity (ROE, Earnings per Share (EPS and EVA have both simultaneous and partial impact on the dependent variable, that is stock return. An interesting finding is that the regression coefficients are different among the variables. ROE and EPS were found to have positive and significant impact on dependent variable while EVA and ROA were found to have negative and significant impact on dependent variable. A positive value for ROE means that the ROE variable can be taken as a measure for a company’s effectivity in utilizing equity in the effort to gain profit. While EPS was found to have the most dominant impact on stock price. The higher the EPS, the greater management’s success in gaining profit for the shareholder or investors. ROA was found to have negative and significant. A finding of this research which is contrary to previous research is that economic value added (EVA was found to have negative and significant impact on stock price. However this finding can be explained as follows: first, the average debt in the companies in the sample is greater than the value of their equity so that EVA will increase due to the reduction in WACC. The increase in EVA is accompanied by a reduction in stock return. Second, positive EVA is not accompanied by any increase of stock performance in the market; and

“PERFORMANCE TREND” AND “PERFORMANCE CURRENT” RATINGS BY ECONOMIC VALUE ADDED (EVA

Directory of Open Access Journals (Sweden)

ALEXANDRU BOGEANU

2013-08-01

Full Text Available The Economic Value Added (EVA is an index of “durable development.” It was proposed by the Stern-Stewart Office and represents the true economic profit of companies. A company reports economic profit only if thereported accounting profit is higher than the opportunity cost of equity. The authors of the EVA model (Stern-Stewart have also proposed the ways of restating the financial statements to get a “fair image” of the results, thuseliminating the “accounting distortions.”Based on the performance indexes calculated based on EVA and second-generation indexes relating toEVA, we calculated two types of rating: Rating Performance Current and Rating Performance Trend. The rating iscalculated by means of the percentiles technique and the results are split into 22 rating classes.The used database is Russell 3000.

Analysis of the mechanical properties and characterization by solid state {sup 13} C NMR of recycled EVA copolymer/silica composites

Energy Technology Data Exchange (ETDEWEB)

Stael, Giovanni Chaves [Observatorio Nacional, Rio de Janeiro, RJ (Brazil)]. E-mail: stael@on.br; Rocha, Marisa Cristina Guimaraes [Universidade do Estado do Rio de Janeiro, Nova Friburgo, RJ (Brazil). Instituto Politecnico; Menezes, Sonia Maria Cabral de [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas. Quimica; D' Almeida, Jose Roberto Morais; Ruiz, Naira Machado da Silva [Pontificia Universidade Catolica do Rio de Janeiro, RJ (Brazil)

2005-07-15

The incorporation of micrometer sized silica particles on poly (ethylene-co-vinyl acetate) - EVA - residues from the footwear industry was evaluated. The effects of the processing parameters - temperature and mixing ratio - on the mechanical behavior of molded plates of neat recycled EVA and EVA/silica composites were also investigated. The mechanical properties measured by the tensile test, the fractographic analysis by scanning electron microscopy (SEM), and the {sup 13} C Nuclear Magnetic Resonance (NMR) showed a reduced EVA to silica compatibility. Therefore, incorporation of untreated silica to recycled EVA copolymer produced a slight decrease on the mechanical performance of EVA/silica composites in respect to neat EVA copolymer. The NMR analysis also shows that the crosslinking process on recycled EVA may be occurring at the carbonyl group. (author)

Lunar EVA Dosimetry: MIcroDosimeter iNstrument (MIDN) System Suitable for Space Flight

Data.gov (United States)

National Aeronautics and Space Administration — MIDN PROTOTYPE FLIGHT INSTRUMENT 1. Based on our experience with the MIDN development, we designed and developed an advanced version of the instrument. 2. A...

Intra-EVA Space-to-Ground Interactions when Conducting Scientific Fieldwork Under Simulated Mars Mission Constraints

Science.gov (United States)

Beaton, Kara H.; Chappell, Steven P.; Abercromby, Andrew F. J.; Lim, Darlene S. S.

2018-01-01

with the MSC via voice and text messaging. They also provided scientific instrument data, still imagery, video streams from chest-mounted cameras, GPS location tracking information. The MSC monitored and reviewed incoming data from the field across delay and provided recommendations for pre-sampling and sampling tasks based on their collective expertise. The scientists used dynamic priority ranking lists, referred to as dynamic leaderboards, to track and rank candidate samples relative to one another and against the science objectives for the current EVA and the overall mission. Updates to the dynamic leaderboards throughout the EVA were relayed regularly to the IV crewmembers. The use of these leaderboards enabled the crew to track the dynamic nature of the MSC recommendations and helped minimize crew idle time (defined as time spent waiting for input from Earth during which no other productive tasks are being performed). EVA timelines were strategically designed to enable continuous (delayed) feedback from an Earth-based Science Team while simultaneously minimizing crew idle time. Such timelines are operationally advantageous, reducing transport costs by eliminating the need for crews to return to the same locations on multiple EVAs while still providing opportunities for recommendations from science experts on Earth, and scientifically advantageous by minimizing the potential for cross-contamination across sites. This paper will highlight the space-to-ground interaction results from the three BASALT field deployments, including planned versus actual EVA timeline data, ground assimilation times (defined as the amount of time available to the MSC to provide input to the crew), and idle time. Furthermore, we describe how these results vary under the different communication latency and bandwidth conditions. Together, these data will provide a basis for guiding and prioritizing capability development for future human exploration missions.

Characterization of the Radiation Shielding Properties of US and Russian EVA Suits

International Nuclear Information System (INIS)

Benton, E.R.; Benton, E.V.; Frank, A.L.

2001-01-01

Reported herein are results from the Eril Research, Inc. (ERI) participation in the NASA Johnson Space Center sponsored study characterizing the radiation shielding properties of the two types of space suit that astronauts are wearing during the EVA on-orbit assembly of the International Space Station (ISS). Measurements using passive detectors were carried out to assess the shielding properties of the USEMU Suit and the Russian Orlan-M suit during irradiations of the suits and a tissue equivalent phantom to monoenergetic proton and electron beams at the Loma Linda University Medical Center (LLUMC). During irradiations of 6 MeV electrons and 60 MeV protons, absorbed dose as a function of depth was measured using TLDs exposed behind swatches of the two suit materials and inside the two EVA helmets. Considerable reduction in electron dose was measured behind all suit materials in exposures to 6MeV electrons. Slowing of the proton beam in the suit materials led to an increase in dose measured in exposures to 60 MeV protons. During 232 MeV proton irradiations, measurements were made with TLDs and CR-39 PNTDs at five organ locations inside a tissue equivalent phantom, exposed both with and without the two EVA suits. The EVA helmets produce a 13 to 27 percent reduction in total dose and a 0 to 25 percent reduction in dose equivalent when compared to measurements made in the phantom head alone. Differences in dose and dose equivalent between the suit and non-suit irradiations for the lower portions of the two EVA suits tended to be smaller. Proton-induced target fragmentation was found to be a significant source of increased dose equivalent, especially within the two EVA helmets, and average quality factor inside the EMU and Orlan-M helmets was 2 to 14 percent greater than that measured in the bare phantom head

Non-Venting Thermal and Humidity Control for EVA Suits

Science.gov (United States)

Izenson, Mike; Chen, Weibo; Bue, Grant

2011-01-01

Future EVA suits need processes and systems to control internal temperature and humidity without venting water to the environment. This paper describes an absorption-based cooling and dehumidification system as well as laboratory demonstrations of the key processes. There are two main components in the system: an evaporation cooling and dehumidification garment (ECDG) that removes both sensible heat and latent heat from the pressure garment, and an absorber radiator that absorbs moisture and rejects heat to space by thermal radiation. This paper discusses the overall design of both components, and presents recent data demonstrating their operation. We developed a design and fabrication approach to produce prototypical heat/water absorbing elements for the ECDG, and demonstrated by test that these elements could absorb heat and moisture at a high flux. Proof-of-concept tests showed that an ECDG prototype absorbs heat and moisture at a rate of 85 W/ft under conditions that simulate operation in an EVA suit. The heat absorption was primarily due to direct absorption of water vapor. It is possible to construct large, flexible, durable cooling patches that can be incorporated into a cooling garment with this system. The proof-of-concept test data was scaled to calculate area needed for full metabolic loads, thus showing that it is feasible to use this technology in an EVA suit. Full-scale, lightweight absorber/radiator modules have also been built and tested. They can reject heat at a flux of 33 W/ft while maintaining ECDG operation at conditions that will provide a cool and dry environment inside the EVA suit.

Applying improved instrumentation and computer control systems

International Nuclear Information System (INIS)

Bevilacqua, F.; Myers, J.E.

1977-01-01

In-core and out-of-core instrumentation systems for the Cherokee-I reactor are described. The reactor has 61m-core instrument assemblies. Continuous computer monitoring and processing of data from over 300 fixed detectors will be used to improve the manoeuvering of core power. The plant protection system is a standard package for the Combustion Engineering System 80, consisting of two independent systems, the reactor protection system and the engineering safety features activation system, both of which are designed to meet NRC, ANS and IEEE design criteria or standards. The plants protection system has its own computer which provides plant monitoring, alarming, logging and performance calculations. (U.K.)

Electrostatic Discharge Issues in International Space Station Program EVAs

Science.gov (United States)

Bacon, John B.

2009-01-01

EVA activity in the ISS program encounters several dangerous ESD conditions. The ISS program has been aggressive for many years to find ways to mitigate or to eliminate the associated risks. Investments have included: (1) Major mods to EVA tools, suit connectors & analytical tools (2) Floating Potential Measurement Unit (3) Plasma Contactor Units (4) Certification of new ISS flight attitudes (5) Teraflops of computation (6) Thousands of hours of work by scores of specialists (7) Monthly management attention at the highest program levels. The risks are now mitigated to a level that is orders of magnitude safer than prior operations

High-resolution modelling of health impacts from air pollution using the integrated model system EVA

Science.gov (United States)

Brandt, Jørgen; Andersen, Mikael S.; Bønløkke, Jakob; Christensen, Jesper H.; Geels, Camilla; Hansen, Kaj M.; Jensen, Steen S.; Ketzel, Matthias; Plejdrup, Marlene S.; Sigsgaard, Torben; Silver, Jeremy D.

2014-05-01

we have used a coupling of two chemistry transport models to calculate the air pollution concentration at different scales; the Danish Eulerian Hemispheric Model to calculate the air pollution levels with a resolution down to 5.6 km x 5.6 km and the Urban Background Model to further calculate the air pollution at 1 km x 1 km resolution using results from DEHM as boundary conditions. Both the emission data as well as the population density has been represented in the model system with the same high resolution. Previous health impact assessments related to air pollution have been made on a lower resolution. In this study, the integrated model system, EVA, has been used to estimate the health impacts and related external cost for Denmark over a 20 year period (1990-2010) at a 1 km x 1 km resolution. Furthermore, a sensitivity study of the health impact using coarse and fine resolutions in the model system has been carried out to evaluate the effect of improved description of the geographical population distribution with respect to location of local emissions. Brandt, J., J. D. Silver, J. H. Christensen, M. S. Andersen, J. Bønløkke, T. Sigsgaard, C. Geels, A. Gross, A. B. Hansen, K. M. Hansen, G. B. Hedegaard, E. Kaas and L. M. Frohn, 2013. Contribution from the ten major emission sectors in Europe to the Health-Cost Externalities of Air Pollution using the EVA Model System - an integrated modelling approach. Atmospheric Chemistry and Physics, Vol. 13, pp. 7725-7746, 2013. Brandt, J., J. D. Silver, J. H. Christensen, M. S. Andersen, J. Bønløkke, T. Sigsgaard, C. Geels, A. Gross, A. B. Hansen, K. M. Hansen, G. B. Hedegaard, E. Kaas and L. M. Frohn, 2013. Assessment of Past, Present and Future Health-Cost Externalities of Air Pollution in Europe and the contribution from international ship traffic using the EVA Model System. Atmospheric Chemistry and Physics. Vol. 13, pp. 7747-7764, 2013.

Dynamics, control and sensor issues pertinent to robotic hands for the EVA retriever system

Science.gov (United States)

Mclauchlan, Robert A.

1987-01-01

Basic dynamics, sensor, control, and related artificial intelligence issues pertinent to smart robotic hands for the Extra Vehicular Activity (EVA) Retriever system are summarized and discussed. These smart hands are to be used as end effectors on arms attached to manned maneuvering units (MMU). The Retriever robotic systems comprised of MMU, arm and smart hands, are being developed to aid crewmen in the performance of routine EVA tasks including tool and object retrieval. The ultimate goal is to enhance the effectiveness of EVA crewmen.

Compósitos à base de gesso com resíduos de EVA e vermiculita Gypsum-based composites with EVA waste and vermiculite

Directory of Open Access Journals (Sweden)

Marilia P. de Oliveira

2012-06-01

Full Text Available O gesso é um dos materiais de construção mais antigos de que se tem conhecimento. Algumas de suas propriedades lhes conferem vantagens, tais como resistência ao fogo e isolamentos térmico e acústico. Objetivou-se, com este trabalho, avaliar as propriedades físico-mecânicas de compósitos à base de gesso com a incorporação de resíduos da indústria de calçados, o etileno acetato de vinila (EVA e a vermiculita. O desenvolvimento desses compósitos tem como propósito a produção de elementos de revestimento para proteção térmica de alvenarias. Para determinar a influência dos teores de resíduo de EVA e vermiculita e da relação água/gesso nas propriedades massa específica aparente e nas resistências a flexão e a compressão, foram incorporados cinco diferentes percentuais desses materiais, combinados com três relações água/gesso. Os resultados foram analisados por meio da estatística multivariável e indicaram que a massa específica aparente de ambos os compósitos e a resistência à flexão do compósito com vermiculita, mostraram maior dependência da relação água/gesso; por sua vez, o percentual de agregado apresentou maior influência na resistência à flexão do compósito com EVA e na resistência a compressão de ambos os compósitos.Gypsum is one of the oldest known building materials. Some of its properties confer advantages such as fire resistance, thermal and acoustic insulation. This work aims to study the physical and mechanical properties of gypsum-based composite with the incorporation of residues from the footwear industry ethylene vinyl acetate (EVA and vermiculite. The aim to develop these composites is to produce components for thermal protection of masonry. To determine the influence of different residue levels of EVA and vermiculite, and the water/plaster ratio on the bulk density, flexural and compressive strength, five different percentages of these materials were incorporated combined with

¿Es el EVA, realmente, un indicador del valor económico agregado? ¿Es el EVA, realmente, un indicador del valor económico agregado?

Directory of Open Access Journals (Sweden)

Hernán Herrera Echeverry

2006-12-01

Full Text Available In this article we analyze the relevance of EVA (Economic Value Added as a tool for measuring value added, as well as its usefulness as an indicator in choosing investment projects.  First, we show five ways of calculating EVA, providing examples of each case. Second, we show MVA (Market Value Added and NPV (Net Present Value to be equivalent as criteria used to evaluate investment projects.  This is done with both the limited term and the perpetual cases, as well as for projects with partial and total recovery of the investment.We present a thorough analysis, showing the possibilities and limitations of EVA as a value added measure.  We also introduce three measurements of residual income, CVA (Cash Value Added, Cash Flow Return on Investment (CFROI and Economic Profit (EP, which complement EVA in the value measurement process. Finally, we introduce an example that explicitly shows the equivalence between CVA’s present value, MVA and NPV.En este artículo se hace un análisis sobre la validez del EVA (Economic ValueAdded como una medida del valor generado, y de su utilidad para la evaluaciónde proyectos de inversión. Primero se muestran varias formas de calcular el EVA,haciendo ejercicios ilustrativos en cada caso, posteriormente se establece laequivalencia entre el MVA (Market Value Added y el VPN (valor presente netocomo criterios para la evaluación de proyectos de inversión finitos y perpetuos conrecuperación parcial y total de la inversión.Se realiza un examen crítico mostrando las limitaciones y posibilidades del EVAcomo medida de valor económico agregado, y se plantea la utilidad de indicadoresde ingreso residual para complementar al EVA como criterios de medición de valor,tales son el CVA (Cash Value Added, TRFC (tasa de retorno del flujo de caja yUtilidad Económica (UE. Finalmente, se hace un ejemplo en donde se explicitacómo el valor presente del CVA coincide con el MVA y el VPN.

EVA Physiology, Systems and Performance [EPSP] Project

Science.gov (United States)

Gernhardt, Michael L.

2010-01-01

This viewgraph presentation gives a general overview of the biomedical and technological challenges of Extravehicular Activity (EVA). The topics covered include: 1) Prebreathe Protocols; 2) Lunar Suit Testing and Development; and 3) Lunar Electric Rover and Exploration Operations Concepts.

Tectonic contact beetwen Paleozoic and Triassic rocks south of Podolševa (Slovenia

Directory of Open Access Journals (Sweden)

Bogomir Celarc

2002-12-01

Full Text Available Tectonic contact between Paleozoic and Triassic rocks south of Podolševa, which passes prominent cliffs over the left bank of Savinja river (Klemenča peč, Jamnikova peč, Golerjeva peč, Strevčeva peč and Huda peč, is on the basis of the new mapping a steep fault, dipping to the north. In the last phase, the fault was dextral strike – slip active, before was probably reverse, and can represent accompanying structure of Periadriatic lineament. It was under transpresive tectonic regime and complies with model of positive flower structure.We named it Podol{evski prelom (Podol{eva fault.

Biosensors for EVA: Muscle Oxygen and pH During Walking, Running and Simulated Reduced Gravity

Science.gov (United States)

Lee, S. M. C.; Ellerby, G.; Scott, P.; Stroud, L.; Norcross, J.; Pesholov, B.; Zou, F.; Gernhardt, M.; Soller, B.

2009-01-01

During lunar excursions in the EVA suit, real-time measurement of metabolic rate is required to manage consumables and guide activities to ensure safe return to the base. Metabolic rate, or oxygen consumption (VO2), is normally measured from pulmonary parameters but cannot be determined with standard techniques in the oxygen-rich environment of a spacesuit. Our group developed novel near infrared spectroscopic (NIRS) methods to calculate muscle oxygen saturation (SmO2), hematocrit, and pH, and we recently demonstrated that we can use our NIRS sensor to measure VO2 on the leg during cycling. Our NSBRI-funded project is looking to extend this methodology to examine activities which more appropriately represent EVA activities, such as walking and running and to better understand factors that determine the metabolic cost of exercise in both normal and lunar gravity. Our 4 year project specifically addresses risk: ExMC 4.18: Lack of adequate biomedical monitoring capability for Constellation EVA Suits and EPSP risk: Risk of compromised EVA performance and crew health due to inadequate EVA suit systems.

Modified paraffin wax for improvement of histological analysis efficiency.

Science.gov (United States)

Lim, Jin Ik; Lim, Kook-Jin; Choi, Jin-Young; Lee, Yong-Keun

2010-08-01

Paraffin wax is usually used as an embedding medium for histological analysis of natural tissue. However, it is not easy to obtain enough numbers of satisfactory sectioned slices because of the difference in mechanical properties between the paraffin and embedded tissue. We describe a modified paraffin wax that can improve the histological analysis efficiency of natural tissue, composed of paraffin and ethylene vinyl acetate (EVA) resin (0, 3, 5, and 10 wt %). Softening temperature of the paraffin/EVA media was similar to that of paraffin (50-60 degrees C). The paraffin/EVA media dissolved completely in xylene after 30 min at 50 degrees C. Physical properties such as the amount of load under the same compressive displacement, elastic recovery, and crystal intensity increased with increased EVA content. EVA medium (5 wt %) was regarded as an optimal composition, based on the sectioning efficiency measured by the numbers of unimpaired sectioned slices, amount of load under the same compressive displacement, and elastic recovery test. Based on the staining test of sectioned slices embedded in a 5 wt % EVA medium by hematoxylin and eosin (H&E), Masson trichrome (MT), and other staining tests, it was concluded that the modified paraffin wax can improve the histological analysis efficiency with various natural tissues. (c) 2010 Wiley-Liss, Inc.

All about Eve. Eva Hesse and the Post-Minimalist Romantic Irony

Directory of Open Access Journals (Sweden)

Szymański, Wojciech

2014-03-01

Full Text Available The article employs the category of Romantic irony for an interpretation of Eva Hesse's work. It takes as its starting point one of Arthur Danto's texts, where the American philosopher makes a positive re-evaluation of the artist's work, and reads it as a largely humorous combination of two – seemingly incongruent – traditions of American art of the 20thcentury: Abstract Expressionism and Minimalism. Features that Danto finds humorous, the author of the present article considers exemplary of Romantic irony, an approach that he finds in Eva Hesse's oeuvre. In the second part of the article, two competing interpretations of Eva Hesse's work are presented: Robert Pincus-Witten's and Lucy R. Lippard's. However, with the use of the notion of Romantic irony their standpoints can be reconciled, with a simultaneous indication of a previously dismissed, yet crucial, ironic aspect of the work of the American artist.

Vabariigi aastapäeva tähistamisest Hamiltonis

Index Scriptorium Estoniae

2009-01-01

EV 91. aastapäeva tähistas Hamiltoni Eesti Võitlejate Ühing, Hamiltoni Eesti Pensionäride Klubi; Hamiltoni eesti organisatsioonid korraldasid aktuse, mille peakõneleja oli Eesti Sihtkapital Kanadas esinaine Lia Hess

High-Pressure Oxygen Generation for Outpost EVA Study

Science.gov (United States)

Jeng, Frank F.; Conger, Bruce; Ewert, Michael K.; Anderson, Molly S.

2009-01-01

The amount of oxygen consumption for crew extravehicular activity (EVA) in future lunar exploration missions will be significant. Eight technologies to provide high pressure EVA O2 were investigated. They are: high pressure O2 storage, liquid oxygen (LOX) storage followed by vaporization, scavenging LOX from Lander followed by vaporization, LOX delivery followed by sorption compression, water electrolysis followed by compression, stand-alone high pressure water electrolyzer, Environmental Control and Life Support System (ECLSS) and Power Elements sharing a high pressure water electrolyzer, and ECLSS and In-Situ Resource Utilization (ISRU) Elements sharing a high pressure electrolyzer. A trade analysis was conducted comparing launch mass and equivalent system mass (ESM) of the eight technologies in open and closed ECLSS architectures. Technologies considered appropriate for the two architectures were selected and suggested for development.

THE APPLICATION OF THE METHOD ENVIRONMENTAL VALUE AT RISK (EVaR IN ENVIRONMENTAL ECONOMY

Directory of Open Access Journals (Sweden)

Gabriela Cornelia I. PICIU

2014-04-01

Full Text Available Taking into account the fact that the methodology Value at Risk or the method VaR, which is omnipresent in investment banking and which has lately become a standard in the procedure of evaluating risks for any category of economic activities, we shall use a technique that is compatible with the VaR-market, called Environmental Value at Risk or EvaR. While the VaR- market uses a level of trust of 95%, the EvaR uses a set of levels up to 99,999%. Thus, we shall try to analyze the variables of the method EVaR, and the way in which this model can be applied as a risk of the lack (rarity of petroleum. This risk is not only analyzed as a unique risk of growing the prices, but also as an uncertainty risk on volatile markets, in which the price and the volatility are the main variables used by the function EVaR.

Commercial Spacewalking: Designing an EVA Qualification Program for Space Tourism

Science.gov (United States)

Gast, Matthew A.

2010-01-01

In the near future, accessibility to space will be opened to anyone with the means and the desire to experience the weightlessness of microgravity, and to look out upon both the curvature of the Earth and the blackness of space, from the protected, shirt-sleeved environment of a commercial spacecraft. Initial forays will be short-duration, suborbital flights, but the experience and expertise of half a century of spaceflight will soon produce commercial vehicles capable of achieving low Earth orbit. Even with the commercial space industry still in its infancy, and manned orbital flight a number of years away, there is little doubt that there will one day be a feasible and viable market for those courageous enough to venture outside the vehicle and into the void, wearing nothing but a spacesuit, armed with nothing but preflight training. What that Extravehicular Activity (EVA) preflight training entails, however, is something that has yet to be defined. A number of significant factors will influence the composition of a commercial EVA training program, but a fundamental question remains: 'what minimum training guidelines must be met to ensure a safe and successful commercial spacewalk?' Utilizing the experience gained through the development of NASA's Skills program - designed to qualify NASA and International Partner astronauts for EVA aboard the International Space Station - this paper identifies the attributes and training objectives essential to the safe conduct of an EVA, and attempts to conceptually design a comprehensive training methodology meant to represent an acceptable qualification standard.

Changes in the EV-A71 Genome through Recombination and Spontaneous Mutations: Impact on Virulence

Directory of Open Access Journals (Sweden)

Madiiha Bibi Mandary

2018-06-01

Full Text Available Enterovirus 71 (EV-A71 is a major etiological agent of hand, foot and mouth disease (HFMD that mainly affects young children less than five years old. The onset of severe HFMD is due to neurological complications bringing about acute flaccid paralysis and pulmonary oedema. In this review, we address how genetic events such as recombination and spontaneous mutations could change the genomic organization of EV-A71, leading to an impact on viral virulence. An understanding of the recombination mechanism of the poliovirus and non-polio enteroviruses will provide further evidence of the emergence of novel strains responsible for fatal HFMD outbreaks. We aim to see if the virulence of EV-A71 is contributed solely by the presence of fatal strains or is due to the co-operation of quasispecies within a viral population. The phenomenon of quasispecies within the poliovirus is discussed to reflect viral fitness, virulence and its implications for EV-A71. Ultimately, this review gives an insight into the evolution patterns of EV-A71 by looking into its recombination history and how spontaneous mutations would affect its virulence.

Synergistic effects of EB irradiation and heat on EVA electrical insulators

International Nuclear Information System (INIS)

Jipa, S.; Zaharescu, T.; Marcuta, M.; Setnescu, R.; Gorghiu, L.M.; Dumitrescu, C.

2005-01-01

Radiation/thermal degradation is discussed as a successful endurance check. EVA samples were subjected to electron beam irradiation at 12, 30, 60 and 90kGy. Heat treatment was performed in air at 120 o C for 72h and 120h. Chemiluminescence (CL) investigations on EVA specimens were carried out at 200, 210 and 220 o C. Several kinetic parameters such as oxidation induction time (t i ), half-oxidation time (t 1/2 ), maximum oxidation rate (v ox max ), maximum time of thermal oxidation (t max ) and other chemiluminescence features were obtained from the time dependencies of the CL intensity. While the ageing factors of processed EVA samples reveal a constant value for two testing temperatures (200 and 210 o C), the co-operative factors that describe a combined (synergistic) degradation present higher than unity values, either for the oxidation rates or for the maximum CL intensity measured for all irradiation doses. They increase linearly with dose

Synergistic effects of EB irradiation and heat on EVA electrical insulators

Energy Technology Data Exchange (ETDEWEB)

Jipa, S [' Valachia' University of Ta-hat rgoviste, Faculty of Sciences, 1 Carol I Av., Targoviste (Romania); Advanced Research Institute for Electrical Engineering, 313 Splaiul Unirii, Bucharest 030138 (Romania); Zaharescu, T [Advanced Research Institute for Electrical Engineering, 313 Splaiul Unirii, Bucharest 030138 (Romania); Marcuta, M [ICPE ELECTROSTATICA, 313 Splaiul Unirii, Bucharest 030138 (Romania); Setnescu, R [' Valachia' University of Ta-hat rgoviste, Faculty of Sciences, 1 Carol I Av., Targoviste (Romania); Gorghiu, L M [' Valachia' University of Targoviste, Faculty of Sciences, 1 Carol I Av., Ta-hat rgoviste (Romania); Dumitrescu, C [' Valachia' University of Targoviste, Faculty of Sciences, 1 Carol I Av., Targoviste (Romania)

2005-07-01

Radiation/thermal degradation is discussed as a successful endurance check. EVA samples were subjected to electron beam irradiation at 12, 30, 60 and 90kGy. Heat treatment was performed in air at 120{sup o}C for 72h and 120h. Chemiluminescence (CL) investigations on EVA specimens were carried out at 200, 210 and 220{sup o}C. Several kinetic parameters such as oxidation induction time (t{sub i}), half-oxidation time (t{sub 1/2}), maximum oxidation rate (v{sub ox}{sup max}), maximum time of thermal oxidation (t{sub max}) and other chemiluminescence features were obtained from the time dependencies of the CL intensity. While the ageing factors of processed EVA samples reveal a constant value for two testing temperatures (200 and 210{sup o}C), the co-operative factors that describe a combined (synergistic) degradation present higher than unity values, either for the oxidation rates or for the maximum CL intensity measured for all irradiation doses. They increase linearly with dose.

Effect of fibre treatments on tensile properties of ethylene vinyl acetate/natural rubber/mengkuang leaf fibre (EVA/NR/MLF) thermoplastic elastomer composites

Science.gov (United States)

Hashim, Faiezah; Ismail, Hanafi; Rusli, Arjulizan

2017-07-01

Nowadays, a great attention has been dedicated to natural fibers as reinforcement for polymer composites. Natural fibers, compared to glass fibers, exhibit better mechanical properties, such as stiffness, impact strength, flexibility and modulus. However, certain drawbacks, such as the incompatibility between fibers and polymer matrices, the tendency to form aggregates during processing and the poor resistance to moisture, reduce the use of these natural fibers as reinforcements in polymers. Several treatments and modifications are being used to improve the adhesion between fibre and matrix. In this work, the effect of bleaching treatments using hydrogen peroxide in the Mengkuang leaf fibre (MLF) was evaluated on tensile properties of Ethylene Vinyl Acetate (EVA)/Natural Rubber (NR)/MLF composites. Treated MLF were mixed with the EVA/NR blend in Haake internal mixer at 120 °C and rotor speed of 50 rpm for 10 minutes. Fibre morphology and the fibre/matrix interface ware further characterized by scanning electron microscopy (SEM). The tensile strength was increased by about 8% as compared to the composites with untreated fibers. The increased adhesion between fiber and matrix was also observed by SEM. Thus, EVA/NR/MLF composites reinforced with the treated fibres exhibited better tensile properties than untreated EVA/NR/MLF composites.

Kodundust tuleks õpetada teisiti / Tiina Päeva

Index Scriptorium Estoniae

Päeva, Tiina

2001-01-01

Tiina Päeva 2000. a. läbi viidud uurimistööst "Eesti noorte kodumajanduslikud oskused ja teadmised - nende tähtsus, allikad ning seotus kodumajanduse õpetamisega", milles huvitas autorit, kuidas suhtuvad Eesti noored poistele kodunduse õpetamisse ning mida Eesti noored kodumajandusest kui õppeainest arvavad

EVA Human Health and Performance Benchmarking Study Overview and Development of a Microgravity Protocol

Science.gov (United States)

Norcross, Jason; Jarvis, Sarah; Bekdash, Omar; Cupples, Scott; Abercromby, Andrew

2017-01-01

The primary objective of this study is to develop a protocol to reliably characterize human health and performance metrics for individuals working inside various EVA suits under realistic spaceflight conditions. Expected results and methodologies developed during this study will provide the baseline benchmarking data and protocols with which future EVA suits and suit configurations (e.g., varied pressure, mass, center of gravity [CG]) and different test subject populations (e.g., deconditioned crewmembers) may be reliably assessed and compared. Results may also be used, in conjunction with subsequent testing, to inform fitness-for-duty standards, as well as design requirements and operations concepts for future EVA suits and other exploration systems.

Insight into a Pedagogical Sketchbook. Life and work of Eva Eyquem

OpenAIRE

Richter, Sabine

2016-01-01

Die vorliegende Arbeit dokumentiert und kontextualisiert das Werk der französischen Kunstpädagogin und ehemaligen Itten-Schülerin Eva Eyquem, geb. Plaut (1915-2009). Es ist meine Absicht, ihr Werk für Forschung und Lehre zugänglich zu machen und für einen kunstpädagogischen Diskurs zu öffnen, der sich mit Positionen in der Nachfolge der Bauhaus-Pädagogik befasst. Meine Arbeit ist in zwei Teile gegliedert. Sie umfasst eine Monografie zu Eva Eyquem, sowie eine fachwissenschaftliche Reflexion, i...

SELENE - Self-Forming Extensible Lunar EVA Network, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The Lunar EVA network will exhibit a wide range of connectivity levels due to the challenging communications environment and mission dynamics. Disruption-Tolerant...

EVA Development and Verification Testing at NASA's Neutral Buoyancy Laboratory

Science.gov (United States)

Jairala, Juniper C.; Durkin, Robert; Marak, Ralph J.; Sipila, Stepahnie A.; Ney, Zane A.; Parazynski, Scott E.; Thomason, Arthur H.

2012-01-01

As an early step in the preparation for future Extravehicular Activities (EVAs), astronauts perform neutral buoyancy testing to develop and verify EVA hardware and operations. Neutral buoyancy demonstrations at NASA Johnson Space Center's Sonny Carter Training Facility to date have primarily evaluated assembly and maintenance tasks associated with several elements of the International Space Station (ISS). With the retirement of the Shuttle, completion of ISS assembly, and introduction of commercial players for human transportation to space, evaluations at the Neutral Buoyancy Laboratory (NBL) will take on a new focus. Test objectives are selected for their criticality, lack of previous testing, or design changes that justify retesting. Assembly tasks investigated are performed using procedures developed by the flight hardware providers and the Mission Operations Directorate (MOD). Orbital Replacement Unit (ORU) maintenance tasks are performed using a more systematic set of procedures, EVA Concept of Operations for the International Space Station (JSC-33408), also developed by the MOD. This paper describes the requirements and process for performing a neutral buoyancy test, including typical hardware and support equipment requirements, personnel and administrative resource requirements, examples of ISS systems and operations that are evaluated, and typical operational objectives that are evaluated.

Efeito da compatibilização da mistura NBR/EVA sobre sua morfologia de fase co-contínua Effect of the compatibilization of NBR/EVA blends on co-continuous morphology

Directory of Open Access Journals (Sweden)

Bluma G. Soares

2003-01-01

Full Text Available O objetivo deste trabalho foi investigar a influência do poli (etileno-co-acetato de vinila funcionalizado com grupos mercaptana (EVALSH nas propriedades reológicas, morfológicas e dinamico-mecânicas de misturas envolvendo borracha nitrílica (NBR e copolímero de etileno - acetato de vinila (EVA. Experiências envolvendo extração seletiva da fase NBR associadas à análise de microscopia eletrônica de varredura indicaram que estruturas do tipo co-contínuas são formadas em uma faixa de composição de 30 a 60 % em massa de EVA. A adição de EVALSH não afetou esta faixa de co-continuidade, porém deslocou o limiar de percolação para menores teores de EVA. Este comportamento foi mais pronunciado em misturas ricas em NBR. A faixa de co-continuidade também foi evidenciada a partir de análise dinamico-mecânica. Dados reológicos revelaram também que a adição de EVALSH aumentou a viscosidade do sistema para misturas ricas em NBR.The influence of ethylene-vinyl acetate copolymer functionalized with mercapto groups (EVALSH on rheological, morphological and dynamic mechanical properties of nitrilic rubber (NBR/ ethylene - vinyl acetate copolymer (EVA blends has been investigated. Selective extraction experiments of NBR phase and scanning electron micrography suggest that co-continuous morphologies were formed in a range of blend compositions from 30 to 60 wt% of EVA. The addition of EVALSH did not affect the co-continuous range but shifted the percolation threshold of NBR-richer blends towards lower amount of EVA. The co-continuous range was also evidenced by dynamic mechanical analysis. Rheological data also revealed that the presence of EVALSH increased the viscosity of the blends containing higher amounts of NBR.

Easy Volcanic Aerosol (EVA v1.0: an idealized forcing generator for climate simulations

Directory of Open Access Journals (Sweden)

M. Toohey

2016-11-01

Full Text Available Stratospheric sulfate aerosols from volcanic eruptions have a significant impact on the Earth's climate. To include the effects of volcanic eruptions in climate model simulations, the Easy Volcanic Aerosol (EVA forcing generator provides stratospheric aerosol optical properties as a function of time, latitude, height, and wavelength for a given input list of volcanic eruption attributes. EVA is based on a parameterized three-box model of stratospheric transport and simple scaling relationships used to derive mid-visible (550 nm aerosol optical depth and aerosol effective radius from stratospheric sulfate mass. Precalculated look-up tables computed from Mie theory are used to produce wavelength-dependent aerosol extinction, single scattering albedo, and scattering asymmetry factor values. The structural form of EVA and the tuning of its parameters are chosen to produce best agreement with the satellite-based reconstruction of stratospheric aerosol properties following the 1991 Pinatubo eruption, and with prior millennial-timescale forcing reconstructions, including the 1815 eruption of Tambora. EVA can be used to produce volcanic forcing for climate models which is based on recent observations and physical understanding but internally self-consistent over any timescale of choice. In addition, EVA is constructed so as to allow for easy modification of different aspects of aerosol properties, in order to be used in model experiments to help advance understanding of what aspects of the volcanic aerosol are important for the climate system.

KIK pidas sünnipäeva / Endrik Tõnsberg

Index Scriptorium Estoniae

Tõnsberg, Endrik

2005-01-01

11. mail 2005. a. andsid Keskkonnainvesteeringute Keskuse viienda sünnipäeva puhul ajakirjanikele pressikonverentsi KIK-i nõukogu esimees, keskkonnaminister Villu Reiljan, KIK-i juhataja Kalev Aun ja programmijuht Heiko Põdersalu

Astronaut Dale Gardner rehearses during EVA practice

Science.gov (United States)

1984-01-01

Astronaut Dale A. Gardner, 51-A mission specialist, rehearses control of manned maneuvering unit (MMU) during a practice for an extravehicular activity (EVA). Gardner is in the Shuttle mockup and integration laboratory at JSC. Gardner handles a stinger device to make initial contact with one of the two satellites they will be working with.

Active Solid State Dosimetry for Lunar EVA

Science.gov (United States)

Wrbanek, John D.; Fralick, Gustave C.; Wrbanek, Susan Y.; Chen, Liang-Yu.

2006-01-01

The primary threat to astronauts from space radiation is high-energy charged particles, such as electrons, protons, alpha and heavier particles, originating from galactic cosmic radiation (GCR), solar particle events (SPEs) and trapped radiation belts in Earth orbit. There is also the added threat of secondary neutrons generated as the space radiation interacts with atmosphere, soil and structural materials.[1] For Lunar exploration missions, the habitats and transfer vehicles are expected to provide shielding from standard background radiation. Unfortunately, the Lunar Extravehicular Activity (EVA) suit is not expected to afford such shielding. Astronauts need to be aware of potentially hazardous conditions in their immediate area on EVA before a health and hardware risk arises. These conditions would include fluctuations of the local radiation field due to changes in the space radiation field and unknown variations in the local surface composition. Should undue exposure occur, knowledge of the dynamic intensity conditions during the exposure will allow more precise diagnostic assessment of the potential health risk to the exposed individual.[2

Lightweight concrete blocks with EVA recycled aggregate: a contribution to the thermal efficiency of building external walls

Directory of Open Access Journals (Sweden)

De Melo, A. B.

2013-12-01

Full Text Available The regions with lots of shoe production suffer environmental impacts from waste generation during manufacturing of insoles and outsoles. Research conducted in Brazil has demonstrated the technical feasibility to recycle these wastes, especially Ethylene Vinyl Acetate (EVA, as lightweight aggregate, in the production of non-structural cement blocks. This article presents an evaluation of thermal performance with measurements of temperature variation in mini walls (1 m2 built with different materials, including various kinds of EVA block and ceramic bricks. Tests have shown efficient thermal performance for masonry blocks with EVA. These results and supplementary estimates contribute to add value to the EVA block, considering that there are good expectations that the component, with the new geometry proposed, can contribute to the energy efficiency of buildings, highlighting its suitability to most Brazilian bioclimatic regions.Las regiones con una gran producción de calzado sufren impactos ambientales derivados de la generación de residuos durante la producción de plantillas y suelas. Investigaciones realizadas en Brasil han demostrado la viabilidad técnica para el reciclaje de estos residuos, especialmente el Etileno Vinil Acetato (EVA, como agregado ligero en la fabricación de bloques de hormigón no estructurales. Este trabajo presenta una evaluación del rendimiento térmico, con mediciones de la variación de la temperatura en pequeñas paredes (1 m2 construidas con diversos materiales, incluyendo algunos tipos de bloques EVA y ladrillos de cerámica. Las pruebas demostraron actuaciones térmicas eficientes para las muestras con bloques EVA. Estos resultados y cálculos adicionales contribuyen con un aporte de valor añadido al bloque EVA, considerando que existen buenas expectativas del componente, con una nueva propuesta de geometría, pudiendo contribuir a la eficiencia energética de edificios, especialmente por su adecuación a la

Preparation and characterizations of HDPE-EVA alloy/OMT nanocomposites/paraffin compounds as a shape stabilized phase change thermal energy storage material

International Nuclear Information System (INIS)

Cai Yibing; Hu Yuan; Song Lei; Lu Hongdian; Chen Zuyao; Fan Weicheng

2006-01-01

A kind of shape stabilized phase change nanocomposites materials (PCNM) based on high density polyethylene (HDPE)/ethylene-vinyl acetate (EVA) alloy, organophilic montmorillonite (OMT), paraffin and intumescent flame retardant (IFR) are prepared using twin-screw extruder technique. The structures of the HDPE-EVA alloy/OMT nanocomposites are evidenced by the X-ray diffraction (XRD) and transmission electron microscopy (TEM). The results show that an ordered intercalated nanomorphology of the HDPE-EVA alloy/OMT nanocomposites is formed. Then the structures of the shape stabilized PCNM are characterized by scanning electron microscopy (SEM). The HDPE-EVA alloy/OMT nanocomposites act as the supporting material and form the three-dimensional network structure. The paraffin acts as a phase change material and disperses in the three-dimensional network structure. Its latent heat is given by differential scanning calorimeter (DSC) method. The SEM and DSC results show that the additives of IFR have little effect on the network structure and the latent heat of shape stabilized PCNM, respectively. The thermal stability properties are characterized by thermogravimetric analysis (TGA). The TGA analysis results indicate that the flame retardant shape stabilized PCNM produce a larger amount of char residue at 800 deg. C than that of shape stabilized PCNM, although the onset of weight loss of the flame retardant shape stabilized PCNM occur at a lower temperature. The formed multicellular char residue contributes to the improvement of thermal stability performance. The probable combustion mechanisms are also discussed in this paper

Reconfigurable EVA Radio with Built-In Navigation Capability, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Intelligent Automation, Inc. and its sub-contractor, Purdue University, propose to develop a power-efficient miniaturized reconfigurable EVA radio system with...

Influences of modified bacterial cellulose nanofibers (BCNs) on structural, thermophysical, optical, and barrier properties of poly ethylene-co-vinyl acetate (EVA) nanocomposite.

Science.gov (United States)

Ghadikolaei, Shila Shirdel; Omrani, Abdollah; Ehsani, Morteza

2018-04-14

The BCNs were chemically modified using acetic anhydride with the aim of improving its dispersion and interfacial adhesion. Acetylation of BCNs was confirmed by FT-IR spectroscopy. Morphology studies using TEM and SEM revealed that a reasonable dispersion of the modified BCNs in the EVA matrix was accomplished. The DSC data displayed a little shift in the T g to higher temperatures with the incorporation of both modified and unmodified BCNs. Increased thermal stability of the nanocomposites consisting acetylated BCNs was confirmed by TGA technique. DMA measurements highlighted that the storage modulus increased and the damping properties decreased for the nanocomposites with regard to the neat EVA. Copyright © 2018 Elsevier B.V. All rights reserved.

INTEGRATING ABC AND EVA TO EVALUATE INVESTMENT DECISIONS

Directory of Open Access Journals (Sweden)

N. Chiadamrong

2017-12-01

Full Text Available The significance of investment is transparent in the world of competitive business. Traditional costing systems in which their emphasizes are for short term savings rather than long term benefits have shown some lacking in providing accurate and reliable cost data for the investment decisions. Activity-based Costing (ABC, which is developed to satisfy some of the weaknesses of the traditional costing systems, can provide valuable insights into the operating processes and come up with more accurate cost data. In this paper, ABC is used to provide significant information for investment decisions. Although, the ABC method provides accurate operating product costs, it does not identify which products are economic valued added creators and so contribute to companies’ wealth. This drawback can be overcome by applying Economic Value Added (EVA. The adoption of ABC and EVA can represent a considerable change in the managerial thinking and to corporate strategies and business performance.

EVA 1 - ADAM 1

International Nuclear Information System (INIS)

Decken, C.B. von der; Fedders, H.; Hoehlein, B.

1980-01-01

The supplying of industry and households with heat is a central problem in our economy. The crisis background of oil supply renders a long-term secured heat supply with nuclear power plants a discussible alternative. The district heating in the form of hot water, which is heated in power plants and supplied to the consumer via district heating pipeline networks, however, is limited due to the unavoidable heat losses. To bridge long distances between the heat source and consumer and to maintain the heat at a high temperature level, there are distinct advantages in using the EVA-ADAM principle of long-distance energy transport. (orig.) [de

Examination of a Standardized Test for Evaluating the Degree of Cure of EVA Encapsulation (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Miller, D.; Wohlgemuth, J.; Gu, X.; Haldeman, S.; Hidalgo, M.; Malguth, E.; Reid, C.; Shioda, T.; Schulze, S.; Wang, Z.

2013-11-01

The curing of cross-linkable encapsulation is a critical consideration for photovoltaic (PV) modules manufactured using a lamination process. Concerns related to ethylene-co-vinyl acetate (EVA) include the quality (e.g., expiration and uniformity) of the films or completion (duration) of the cross-linking of the EVA within a laminator. Because these issues are important to both EVA and module manufacturers, an international standard has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the degree of cure for EVA encapsulation. The present draft of the standard calls for the use of differential scanning calorimetry (DSC) as the rapid, enabling secondary (test) method. Both the residual enthalpy- and melt/freeze-DSC methods are identified. The DSC methods are calibrated against the gel content test, the primary (reference) method. Aspects of other established methods, including indentation and rotor cure metering, were considered by the group. Key details of the test procedure will be described.

Examination of a Standardized Test for Evaluating the Degree of Cure of EVA Encapsulation: Preprint

Energy Technology Data Exchange (ETDEWEB)

Miller, D. C.; Gu, X.; Haldenman, S.; Hidalgo, M.; Malguth, E.; Reid, C. G.; Shioda, T.; Schulze, S. H.; Wang, Z. Y.; Wohlgemuth, J. H.

2013-11-01

The curing of cross-linkable encapsulation is a critical consideration for photovoltaic (PV) modules manufactured using a lamination process. Concerns related to ethylene-co-vinyl acetate (EVA) include the quality (e.g., expiration and uniformity) of the films or completion (duration) of the cross-linking of the EVA within a laminator. Because these issues are important to both EVA and module manufacturers, an international standard has recently been proposed by the Encapsulation Task-Group within the Working Group 2 (WG2) of the International Electrotechnical Commission (IEC) Technical Committee 82 (TC82) for the quantification of the degree of cure for EVA encapsulation. The present draft of the standard calls for the use of differential scanning calorimetry (DSC) as the rapid, enabling secondary (test) method. Both the residual enthalpy- and melt/freeze-DSC methods are identified. The DSC methods are calibrated against the gel content test, the primary (reference) method. Aspects of other established methods, including indentation and rotor cure metering, were considered by the group. Key details of the test procedure will be described.

Soomemeelsed / Eva Klemets ja Juhan Ulfsak ; intervjueerinud Rednar Annus

Index Scriptorium Estoniae

Koldits, Eva, 1977-

2009-01-01

Kristian Smedsi lavastusest "Mental Finland", milles osalevad üheteistkümne rahvuse esindajad, sealhulgas eesti näitlejad Juhan Ulfsak ja Eva Klemets. Koostööst Kristian Smedsi trupiga. Eesti ja soome teatrimaastiku erinevusest ja sarnasusest

FY13 High Performance EVA Glove (HPEG) Collaboration: Glove Injury Data Mining Effort - Training Data Overview

Science.gov (United States)

Reid, Christopher; Benson, Elizabeth; England, Scott; Charvat, Jacqueline; Norcross, Jason; McFarland, Shane; Rajulu, Sudhakar

2014-01-01

From the time hand-intensive tasks were first created for EVAs, discomforts and injuries have been noted.. There have been numerous versions of EVA gloves for US crew over the past 50 years, yet pain and injuries persist. The investigation team was tasked with assisting in a glove injury assessment for the High Performance EVA Glove (HPEG) project.center dot To aid in this assessment, the team was asked to complete the following objectives: - First, to develop the best current understanding of what glove-related injuries have occurred to date, and when possible, identify the specific mechanisms that caused those injuries - Second, to create a standardized method for comparison of glove injury potential from one glove to another. center dot The overall goal of the gloved hand injury assessment is to utilize ergonomics in understanding how these glove injuries are occurring, and to propose mitigations to current designs or design changes in the next generation of EVA gloves.

Study of electron beam irradiation effects on morphologic properties of the PET/PP/PE/EVA polymeric blend

International Nuclear Information System (INIS)

Rossini, Edvaldo L.; Silva, Leonardo G. Andrade e; Wiebeck, Helio

2009-01-01

Amidst the pollutants, plastics and especially the 'PET bottles' packaging type, which comprise of poly(ethylene terephthalate) (PET), polypropylene (PP), polyethylene (PE) and poly[ethylene-co-(vinyl acetate)] (EVA) have been causing big damage to the environment. In this work, the polymeric blend PET/PP/PE/EVA was obtained by mechanical recycling 'PET bottles' after consumption, with the objective of finding a solution for this environmental problem. It was also studied the different ionizing radiation dose effects (25, 50, 75, 100, 150, 200, 300, 400 and 500 kGy) on the blend properties using an electron beam accelerator. The morphologic properties of the non-irradiated and irradiated polymeric blend were evaluated by the Light Microscopy (LM) and Scanning Electron Microscopy (SEM). The analysis of the results appeared to be a not mixing and compatible blend. The use of the ionizing radiation improved the homogeneity of the blend. These modifications have been randomized and irregular, depending directly on the dose of applied radiation. (author)

Study of electron beam irradiation effects on morphologic properties of the PET/PP/PE/EVA polymeric blend

Energy Technology Data Exchange (ETDEWEB)

Rossini, Edvaldo L.; Silva, Leonardo G. Andrade e, E-mail: lgasilva@ipen.b [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Wiebeck, Helio, E-mail: hwiebeck@usp.b [Universidade de Sao Paulo (USP), SP (Brazil). Escola Politecnica

2009-07-01

Amidst the pollutants, plastics and especially the 'PET bottles' packaging type, which comprise of poly(ethylene terephthalate) (PET), polypropylene (PP), polyethylene (PE) and poly[ethylene-co-(vinyl acetate)] (EVA) have been causing big damage to the environment. In this work, the polymeric blend PET/PP/PE/EVA was obtained by mechanical recycling 'PET bottles' after consumption, with the objective of finding a solution for this environmental problem. It was also studied the different ionizing radiation dose effects (25, 50, 75, 100, 150, 200, 300, 400 and 500 kGy) on the blend properties using an electron beam accelerator. The morphologic properties of the non-irradiated and irradiated polymeric blend were evaluated by the Light Microscopy (LM) and Scanning Electron Microscopy (SEM). The analysis of the results appeared to be a not mixing and compatible blend. The use of the ionizing radiation improved the homogeneity of the blend. These modifications have been randomized and irregular, depending directly on the dose of applied radiation. (author)

A comparative study of EVA with and without thermal history for different lamination process parameters

Energy Technology Data Exchange (ETDEWEB)

Drabczyk, Kazimierz, E-mail: kazimierz.drabczyk@wp.pl [Institute of Metallurgy and Materials Science, 25 Reymonta St., 30-059 Krakow (Poland); Panek, Piotr [Institute of Metallurgy and Materials Science, 25 Reymonta St., 30-059 Krakow (Poland)

2012-09-01

In more than 80% of the worldwide photovoltaic (PV) modules, mostly very fragile and 200 {mu}m thick, crystalline silicon solar cells are encapsulated into ethylene-vinyl acetate (EVA) foils, which bond the module components together, provide physical protection, electrical insulation and a barrier for moisture ingress. The understanding of what can happen with EVA during its transport, storage and lamination process is necessary to optimize the quality of the PV module for its long exposure to outdoor weather conditions. Achieving a proper cross-link density of over 70%, it is essential to overcome the cold flow of EVA and to make the module durable. In this work, the feasibility of the use of differential scanning calorimetry (DSC) compared with the solvent extraction (SE) method by toluene were evaluated in order to provide structural information on the EVA curing kinetics and the cross-link density. DSC tests were performed on a DTA DuPont1600 tester. The temperature range for the test was from -50 Degree-Sign C to 200 Degree-Sign C, with the heating rate of 10 Degree-Sign C/min, and the endothermic and exothermic peaks were evaluated. Toluene solvent extractions were performed on the same set of samples that were analyzed by DSC. The measured cross-link density shows a direct dependence on the pre-lamination conditions of EVA, which is in good agreement with the data obtained with the DSC method.

A comparative study of EVA with and without thermal history for different lamination process parameters

International Nuclear Information System (INIS)

Drabczyk, Kazimierz; Panek, Piotr

2012-01-01

In more than 80% of the worldwide photovoltaic (PV) modules, mostly very fragile and 200 μm thick, crystalline silicon solar cells are encapsulated into ethylene-vinyl acetate (EVA) foils, which bond the module components together, provide physical protection, electrical insulation and a barrier for moisture ingress. The understanding of what can happen with EVA during its transport, storage and lamination process is necessary to optimize the quality of the PV module for its long exposure to outdoor weather conditions. Achieving a proper cross-link density of over 70%, it is essential to overcome the cold flow of EVA and to make the module durable. In this work, the feasibility of the use of differential scanning calorimetry (DSC) compared with the solvent extraction (SE) method by toluene were evaluated in order to provide structural information on the EVA curing kinetics and the cross-link density. DSC tests were performed on a DTA DuPont1600 tester. The temperature range for the test was from −50 °C to 200 °C, with the heating rate of 10 °C/min, and the endothermic and exothermic peaks were evaluated. Toluene solvent extractions were performed on the same set of samples that were analyzed by DSC. The measured cross-link density shows a direct dependence on the pre-lamination conditions of EVA, which is in good agreement with the data obtained with the DSC method.

Training With Curved Laparoscopic Instruments in Single-Port Setting Improves Performance Using Straight Instruments: A Prospective Randomized Simulation Study.

Science.gov (United States)

Lukovich, Peter; Sionov, Valery Ben; Kakucs, Timea

2016-01-01

Lately single-port surgery is becoming a widespread procedure, but it is more difficult than conventional laparoscopy owing to the lack of triangulation. Although, these operations are also possible with standard laparoscopic instruments, curved instruments are being developed. The aims of the study were to identify the effect of training on a box trainer in single-port setting on the quality of acquired skills, and transferred with the straight and curved instruments for the basic laparoscopic tasks, and highlight the importance of a special laparoscopic training curriculum. A prospective study on a box trainer in single-port setting was conducted using 2 groups. Each group performed 2 tasks on the box trainer in single-port setting. Group-S used conventional straight laparoscopic instruments, and Group-C used curved laparoscopic instruments. Learning curves were obtained by daily measurements recorded in 7-day sessions. On the last day, the 2 groups changed instruments between each other. 1st Department of Surgery, Semmelweis University of Medicine from Budapest, Hungary, a university teaching hospital. In all, 20 fifth-year medical students were randomized into 2 groups. None of them had any laparoscopic or endoscopic experience. Participation was voluntary. Although Group-S performed all tasks significantly faster than Group-C on the first day, the difference proved to be nonsignificant on the last day. All participants achieved significantly shorter task completion time on the last day than on the first day, regardless of the instrument they used. Group-S showed improvement of 63.5%, and Group-C 69.0% improvement by the end of the session. After swapping the instruments, Group-S reached significantly higher task completion time with curved instruments, whereas Group-C showed further progression of 8.9% with straight instruments. Training with curved instruments in a single-port setting allows for a better acquisition of skills in a shorter period. For this

Asteroid Redirect Crewed Mission Space Suit and EVA System Architecture Trade Study

Science.gov (United States)

Bowie, Jonathan; Buffington, Jesse; Hood, Drew; Kelly, Cody; Naids, Adam; Watson, Richard; Blanco, Raul; Sipila, Stephanie

2014-01-01

The Asteroid Redirect Crewed Mission (ARCM) requires a Launch/Entry/Abort (LEA) suit capability and short duration Extra Vehicular Activity (EVA) capability from the Orion spacecraft. For this mission, the pressure garment selected for both functions is the Modified Advanced Crew Escape Suit (MACES) with EVA enhancements and the life support option that was selected is the Exploration Portable Life Support System (PLSS) currently under development for Advanced Exploration Systems (AES). The proposed architecture meets the ARCM constraints, but much more work is required to determine the details of the suit upgrades, the integration with the PLSS, and the tools and equipment necessary to accomplish the mission. This work has continued over the last year to better define the operations and hardware maturation of these systems. EVA simulations were completed in the Neutral Buoyancy Lab (NBL) and interfacing options were prototyped and analyzed with testing planned for late 2014. This paper discusses the work done over the last year on the MACES enhancements, the use of tools while using the suit, and the integration of the PLSS with the MACES.

Modification of PE/PP Polymer Blend Nanocomposites with EPR and EVA Copolymers

Directory of Open Access Journals (Sweden)

Jelenčić, J.

2010-04-01

Full Text Available During the last decade, the use of polyolephinic polymers has been growing in a wide range of fields of applicability and the most widely used polymers are polyethylene and polypropylene. They can be processed separately to produce items with certain properties as well as in the form of blends, where special combinations of properties and price are intended. As it is known, polyethylene (PE and polypropylene (PP are incompatible and the weak interfacial bond strength between the phases directly linked to the blend morphology and results in poor mechanical properties. The properties of many polymer blends arise from the fine-scale structural arrangements or blend morphologies obtained during processing in addition to the proportion of each polymer type present. Compounding PE/PP blends with a single compatibilizer or their combination or some other additives as nanofiller, results in multi-component composites of great interest to research as they enable simultaneous improvement in the final properties of the blend. In addition, it is well known that the extrusion process has a significant effect on the dispersion of the filler in the blends. In this work, the mutual effect of the nanofiller silicium-dioxide (SiO2 and the compatibilizers ethylene-propylene copolymer (EPR and ethylene-vinyl acetate copolymer (EVA on the properties of blends based on polyethylene and polypropylene were studied. The morphology of the samples prepared with nanofiller and compatibilizers is much finer in comparison to the virgin blend. Better dispersion of nanofiller will result in better stability of the polymer blend and decrease in polymer flammability. The addition of the nanofiller and compatibilizers produced an increase in the elasticity especially for the samples prepared in the two-stage extrusion process where the nanofiller was first extruded with PE matrix and then with other polymers of the blends. SEM micrographs confirm finer morphology of samples

High Performance EVA Glove Collaboration: Glove Injury Data Mining Effort

Science.gov (United States)

Reid, C. R.; Benosn, E.; England, S.; Norcross, J. R.; McFarland, S. M.; Rajulu, S.

2014-01-01

Human hands play a significant role during extravehicular activity (EVA) missions and Neutral Buoyancy Lab (NBL) training events, as they are needed for translating and performing tasks in the weightless environment. It is because of this high frequency usage that hand- and arm-related injuries and discomfort are known to occur during training in the NBL and while conducting EVAs. Hand-related injuries and discomforts have been occurring to crewmembers since the days of Apollo. While there have been numerous engineering changes to the glove design, hand-related issues still persist. The primary objectives of this study are therefore to: 1) document all known EVA glove-related injuries and the circumstances of these incidents, 2) determine likely risk factors, and 3) recommend ergonomic mitigations or design strategies that can be implemented in the current and future glove designs. METHODS: The investigator team conducted an initial set of literature reviews, data mining of Lifetime Surveillance of Astronaut Health (LSAH) databases, and data distribution analyses to understand the ergonomic issues related to glove-related injuries and discomforts. The investigation focused on the injuries and discomforts of U.S. crewmembers who had worn pressurized suits and experienced glove-related incidents during the 1980 to 2010 time frame, either during training or on-orbit EVA. In addition to data mining of the LSAH database, the other objective of the study was to find complimentary sources of information such as training experience, EVA experience, suit-related sizing data, and hand-arm anthropometric data to be tied to the injury data from LSAH. RESULTS: Past studies indicated that the hand was the most frequently injured part of the body during both EVA and NBL training. This study effort thus focused primarily on crew training data in the NBL between 2002 and 2010. Of the 87 recorded training incidents, 19 occurred to women and 68 to men. While crew ages ranged from

ETV tähistab tantsupäeva kolme filmiga

Index Scriptorium Estoniae

2006-01-01

Rahvusvahelise tantsupäeva puhul 29. apr. on Eesti Televisiooni kavas kolm tantsuprogrammi - Uwe Scholzi tantsulavastus "Suur Missa", tantsufilm "Teine" (filmi režissöör René Vilbre) ja kolmas film on Inglismaal valminud Lloyd Newsoni "Elu hind"

Using new financial instruments for improving oil trade across Africa: opportunities and limits

International Nuclear Information System (INIS)

Rutten, L.

2001-01-01

This brief paper discusses the potential for using new financial instruments for two purposes: improving intra-African oil trade; and improving the management of the financial flows that come with oil imports and exports. Although different, there are two significant similarities between these two issues. Firstly, the new financial instruments that can be used share some characteristics, and are often arranged/provided by one and the same department in trading companies and banks; they are often used together. Second, in both cases, the key problem that these financial instruments are meant to solve is that of risk. In one case, counterparty risk, in the other, price risk. (au)

Study on thermal properties and crystallization behavior of electron beam irradiated ethylene vinyl acetate (EVA)/waste tyre dust (WTD) blends in the presence of polyethylene graft maleic anhydride (PEgMAH)

Energy Technology Data Exchange (ETDEWEB)

Ramli, Syuhada; Ahmad, S. H. [School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan (Malaysia); Ratnam, C. T. [Radiation Processing Technology Division, Malaysian Nuclear Agency (Nuclear Malaysia), Bangi, 43000 Kajang (Malaysia); Athirah, Nurul [School of Materials and Mineral Resources, USM Engineering Campus (Malaysia)

2013-11-27

The aim of this article is to show the effects of the electron beam irradiation dose and presence of a compatibiliser on the thermal properties and crystallinity of EVA/WTD blends. The purpose of applying electron beam radiation with doses range 50 to 200 kGy and adding a compatibiliser was to enhance the compatibility of the studied blends and at the same time to investigate the possibility of using this technique in the process of recycling polymeric materials. As the compatibilisers, the polyethylene grafted maleic anhydride (PEgMAH) was utilized, they were added at the amounts of 1-5 phr respectively. The enhancement of thermal properties was accompanied by the following effects, discussed in this article: i) an irradiated EVA/WTD blend at 200kGy was found to improve the thermal properties of EVA, ii) the addition of PEgMAH in EVA/WTD blends and the subsequent irradiation allowed prevention of degradation mechanism. iii) the ΔH{sub f} and crystallinity percentage decrease at higher PEgMAH content.

Development of lightweight concrete subfloor with ethylene vinyl acetate (EVA) aggregates waste to reduce impact sound in flooring system

OpenAIRE

Pacheco, Fernanda; Krumenauer, Marcelo; Reis de Medeiros, Daniel; Oliveira, Maria Fernanda; Fonseca Tutikian, Bernardo

2017-01-01

Abstract Comfort and habitability are requirements for housing quality, affected by underfloor system. Thus, this study aims to design lightweight concrete slabs underfloor with the use of ethylene vinyl acetate (EVA) aggregates, with two grain sizes of conventional aggregates replaced with EVA. The experimental counted on four unit mixes, varying the ratio between EVA coarse and fine aggregates and natural aggregates. The underfloor plates were molded with thickness of 3, 5 and 7 centimeters...

Maturing Pump Technology for EVA Applications in a Collaborative Environment

Science.gov (United States)

Hodgson, Edward; Dionne, Steven; Gervais, Edward; Anchondo, Ian

2012-01-01

The transition from low earth orbit Extravehicular Activity (EVA) for construction and maintenance activities to planetary surface EVA on asteroids, moons, and, ultimately, Mars demands a new spacesuit system. NASA's development of that system has resulted in dramatically different pumping requirements from those in the current spacesuit system. Hamilton Sundstrand, Cascon, and NASA are collaborating to develop and mature a pump that will reliably meet those new requirements in space environments and within the design constraints imposed by spacesuit system integration. That collaboration, which began in the NASA purchase of a pump prototype for test evaluation, is now entering a new phase of development. A second generation pump reflecting the lessons learned in NASA's testing of the original prototype will be developed under Hamilton Sundstrand internal research funding and ultimately tested in an integrated Advanced Portable Life Support System (APLSS) in NASA laboratories at the Johnson Space Center. This partnership is providing benefit to both industry and NASA by supplying a custom component for EVA integrated testing at no cost to the government while providing test data for industry that would otherwise be difficult or impossible to duplicate in industry laboratories. This paper discusses the evolving collaborative process, component requirements and design development based on early NASA test experience, component stand alone test results, and near term plans for integrated testing at JSCs.

Eesti vanim raamatukogu tähistab 450. aastapäeva

Index Scriptorium Estoniae

2002-01-01

Oleviste raamatukogu, mille varad on EAR baltikaosakonnas. Aastapäeva puhul avati näitus "Tallinna Oleviste raamatukogu 450" 3. aprillil 2002 Tallinna Raekoja keldrisaalis, samuti esitletakse kogumikku "Bibliotheca Revaliensis ad. D. Olai"

Kõne EV aastapäeva aktusel / Karl Altau

Index Scriptorium Estoniae

Altau, Karl Stephen, 1959-

2006-01-01

Läti kirikus peetud Eesti Vabariigi aastapäeva aktusel rääkis Karl Altau Ühendatud Balti Ameerika Komitee nimel kommunismi ohvrite mälestussamba ehitamise alustamisest Washingtoni kesklinna 2006. aastal, koostööst kõigi baltlaste vahel ja võimalusest annetada, üleskutsest toetada Valgevene rahvast teel demokraatiale

Meremaa võluriga päeva kallastele / Helle Leppik

Index Scriptorium Estoniae

Leppik, Helle

1999-01-01

29. apr. esietendub Ugalas "Meremaa võlur. Päeva kaldad", lavalugu Ursula K. Le Guini Meremaa-lugude alusel, lavastaja Andres Noormets, kunstnikud Silver Vahtre ja Airi Eras, peaosades Margus Vaher, Martin Algus, Aarne Soro, Leila Säälik, Gert Raudsepp, Silvia Sarrap

Astronaut Dale Gardner rehearses control of MMU during EVA practice

Science.gov (United States)

1984-01-01

Astronaut Dale A. Gardner, 51-A mission specialist, rehearses control of manned maneuvering unit (MMU) during a practice for an extravehicular activity (EVA). Gardner is in the Shuttle mockup and integration laboratory at JSC.

THE ECONOMIC VALUE ADDED (EVA - A MEASUREMENT INDICATOR OF THE VALUE CREATION WITHIN A COMPANY FROM THE ROMANIAN SEASIDE HOTEL INDUSTRY

Directory of Open Access Journals (Sweden)

RALUCA-ANDREEA TRANDAFIR

2015-03-01

Full Text Available The purpose of this research is to highlight the role of EVA – an indicator measuring the financial performance of a hotel company from the Romanian seaside. EVA is one of the most appreciated indicators in terms of achieving performance that involve all used resources; this indicator can be adopted for the decentralization of management decisions. In order to highlight the importance of the EVA assessment method, we performed a case study on a representative hotel company that gets positive financial results pursuant to conventional methods, aiming to outline the correlation between EVA and the traditional methods for performance assessment

Hubble Space Telescope EVA Power Ratchet Tool redesign

Science.gov (United States)

Richards, Paul W.; Park, Chan; Brown, Lee

The Power Ratchet Tool (PRT) is a self contained, power-driven, 3/8 inch drive ratchet wrench which will be used by astronauts during Extravehicular Activities (EVA). This battery-powered tool is controlled by a dedicated electonic controller. The PRT was flown during the Hubble Space Telescope (HST) Deployment Mission STS-31 to deploy the solar arrays if the automatic mechanisms failed. The PRT is currently intended for use during the first HST Servicing Mission STS-61 as a general purpose power tool. The PRT consists of three major components; the wrench, the controller, and the battery module. Fourteen discrete combinations of torque, turns, and speed may be programmed into the controller before the EVA. The crewmember selects the desired parameter profile by a switch mounted on the controller. The tool may also be used in the manual mode as a non-powered ratchet wrench. The power is provided by a silver-zinc battery module, which fits into the controller and is replaceable during an EVA. The original PRT did not meet the design specification of torque output and hours of operation. To increase efficiency and reliability the PRT underwent a redesign effort. The majority of this effort focused on the wrench. The original PRT drive train consisted of a low torque, high speed brushless DC motor, a face gear set, and a planocentric gear assembly. The total gear reduction was 300:1. The new PRT wrench consists of a low speed, high torque brushless DC motor, two planetary gear sets and a bevel gear set. The total gear reduction is now 75:1. A spline clutch has also been added to disengage the drive train in the manual mode. The design changes to the controller will consist of only those modifications necessary to accomodate the redesigned wrench.

Evaluation of safety of hypobaric decompressions and EVA from positions of probabilistic theory

Science.gov (United States)

Nikolaev, V. P.

Formation and subsequent evolution of gas bubbles in blood and tissues of subjects exposed to decompression are casual processes in their nature. Such character of bubbling processes in a body predetermines probabilistic character of decompression sickness (DCS) incidence in divers, aviators and astronauts. Our original probabilistic theory of decompression safety is based on stochastic models of these processes and on the concept of critical volume of a free gas phase in body tissues. From positions of this theory, the probability of DCS incidence during single-stage decompressions and during hypobaric decompressions under EVA in particular, is defined by the distribution of possible values of nucleation efficiency in "pain" tissues and by its critical significance depended on the parameters of a concrete decompression. In the present study the following is shown: 1) the dimensionless index of critical nucleation efficiency for "pain" body tissues is a more adequate index of decompression stress in comparison with Tissue Ratio, TR; 2) a priory the decompression under EVA performed according to the Russian protocol is more safe than decompression under EVA performed in accordance with the U.S. protocol; 3) the Russian space suit operated at a higher pressure and having a higher "rigidity" induces a stronger inhibition of mechanisms of cavitation and gas bubbles formation in tissues of a subject located in it, and by that provides a more considerable reduction of the DCS risk during real EVA performance.

Eesti piirivalve tähistas 85. aastapäeva

Index Scriptorium Estoniae

2007-01-01

President Toomas Hendrik Ilvese sõnavõtust Eesti kutselise piirivalve 85. aastapäeva tähistamise pidulikul kontsertaktusel 1. novembril 2007 Estonia kontserdisaalis. Ingl. k. ilmunud ka: Vaba Eesti Sõna 8. nov. 2007, lk. 12, pealk.: President Ilves thanked the Estonian border guards

Instrumentation and control improvements at Experimental Breeder Reactor II

International Nuclear Information System (INIS)

Christensen, L.J.; Planchon, H.P.

1993-01-01

The purpose of this paper is to describe instrumentation and control (I ampersand C) system improvements at Experimental Breeder Reactor 11 (EBR-11). The improvements are focused on three objectives; to keep the reactor and balance of plant (BOP) I ampersand C systems at a high level of reliability, to provide diagnostic systems that can provide accurate information needed for analysis of fuel performance, and to provide systems that will be prototypic of I ampersand C systems of the next generation of liquid metal reactor (LMR) plants

PROPRIEDADES DE ARGAMASSAS COM EVA (ETHYLENE VINYL ACETATE EM SUBSTITUIÇÃO PARCIAL AO AGREGADO

Directory of Open Access Journals (Sweden)

Cleidson Carneiro Guimarães

2017-03-01

Full Text Available RESUMO: O setor da construção civil apresenta grande potencial para aproveitamento de vários tipos de resíduos industriais. A incorporação dos resíduos, principalmente nas argamassas e concretos, produtos com vasta aplicabilidade no setor, tem se mostrado como uma ótima alternativa na diversificação das matérias-primas e para a economia de recursos naturais. Esse trabalho avaliou as propriedades das argamassas, no estado fresco e endurecido, produzidas com substituição parcial da areia por resíduo de EVA (Ethylene Vinyl Acetate. Para isso, foram preparadas argamassas com teores de substituição do agregado 0% (referência, 5%, 10% e 15%, em massa. A relação água/cimento, para cada traço, foi determinada empiricamente e mantida constante para as argamassas com substituição. Os resultados apontam que as argamassas produzidas com agregado de EVA apresentam menor absorção de água e também um decréscimo da resistência mecânica. Desta forma, a produção de argamassas utilizando EVA em substituição ao agregado natural é viável, todavia é necessário avaliar os parâmetros mínimos de aplicação para cada finalidade. Dessa forma, o trabalho apresenta contribuição ao servir de suporte a gestores de empresas de argamassas ou gestores de obra a tomarem decisões acerca da inserção do resíduo de EVA na produção de argamassa. ABSTRACT: The construction sector has great potential for use of various types of industrial waste. The incorporation of waste, especially in mortar and concrete products with wide applicability in the industry, has proven to be a great alternative for diversification of raw materials and the economy of natural resources. This study evaluated the properties of mortars in fresh and hardened state, made with partial replacement of sand by waste EVA (Ethylene Vinyl Acetate. For this, mortars were prepared with substitution aggregate content 0%(reference, 5%, 10% and 15% by weight. The water

Compact, Efficient, and Reliable Ventilation Fan for EVA Suits, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — Advanced EVA suits for space exploration will need a portable life support system (PLSS) that is compact, lightweight, highly reliable, and meets stringent...

TÜ tähistab rahvusülikooli aastapäeva

Index Scriptorium Estoniae

2010-01-01

Emakeelse ülikooli 91. aastapäeva tähistamisest. Aktusel promoveeriti 103 doktorit ja 5 audoktorit. Audoktoriks said: Jaan Einasto (Eesti), Vilmos Voigt (Ungari), Pekka Topias Männistö (Soome), William J. Mitsch (USA), Lars Oreland (Rootsi)

29. V peeti Narva kunstigaleriis traditsioonilist kunstnikupäeva

Index Scriptorium Estoniae

2004-01-01

Salvador Dali 100. sünniaastapäevale pühendatud kunstnikupäeval eksponeerisid 53 Narva, Ivangorodi, Kohtla-Järve, Jõhvi ja Tallinna kunstnikku Dali loomingust inspireeritud töid. Päeva külaline: Tallinna Katariina gild eesotsas Kaire Taliga. Toimus teatri VB performance "Aastaajad. Mitgard"

Simulation and preparation of surface EVA in reduced gravity at the Marseilles Bay subsea analogue sites

Science.gov (United States)

Weiss, P.; Gardette, B.; Chirié, B.; Collina-Girard, J.; Delauze, H. G.

2012-12-01

submarines). COMEX is currently preparing a space mission simulation in the Marseilles Bay (foreseen in June 2012), and the paper will give an overview of the different underwater analogue sites that are available to the scientific community for the simulation of surface EVA or the test of scientific instruments and devices.

Simunas pühitseti uus vitraažaken / Eva Klaas

Index Scriptorium Estoniae

Klaas, Eva, 1977-

2009-01-01

Simunas tähistati 31. oktoobril Simuna kiriku ja kogu kihelkonna nimepäeva, pühitseti ka äsjavalminud vitraažaken, mille autor on Dolores Hoffmann, kelle kujundatud on ka sarja "Maailma loomine" kuuluvad teised vitraažid

Compact, Efficient, and Reliable Ventilation Fan for EVA Suits, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — Advanced EVA suits for space exploration will need a portable life support system (PLSS) that is compact, lightweight, and highly reliable. A key component is a...

Executive compensation and the EVA and MVA performance of ...

African Journals Online (AJOL)

The media regularly report a growing incidence of non-alignment of executive pay and performance, and in some cases, no link between the two whatsoever. The advent of new measures of shareholder wealth such as economic value added (EVA) and market value added (MVA) have allowed some companies to link ...

Preparation, Characterization and Thermo-Chromic Properties of EVA/VO2 Laminate Films for Smart Window Applications and Energy Efficiency in Building

Directory of Open Access Journals (Sweden)

Onruthai Srirodpai

2017-01-01

Full Text Available Thermochromic films based on vanadium dioxide (VO2/ethylene vinyl acetate copolymer (EVA composite were developed. The monoclinic VO2 particles was firstly prepared via hydrothermal and calcination processes. The effects of hydrothermal time and tungsten doping agent on crystal structure and morphology of the calcined metal oxides were reported. After that, 1 wt % of the prepared VO2 powder was mixed with EVA compound, using two different mixing processes. It was found that mechanical properties of the EVA/VO2 films prepared by the melt process were superior to those of which prepared by the solution process. On the other hand, percentage visible light transmittance of the solution casted EVA/VO2 film was greater than that of the melt processed composite film. This was related to the different gel content of EVA rubber and state of dispersion and distribution of VO2 within the polymer matrix phase. Thermochromic behaviors and heat reflectance of the EVA/VO2 film were also verified. In overall, this study demonstrated that it was possible to develop a thermochromic film using the polymer composite approach. In this regard, the mixing condition was found to be one of the most important factors affecting morphology and thermo-mechanical properties of the films.

Advanced Reservoir Characterization and Development through High-Resolution 3C3D Seismic and Horizontal Drilling: Eva South Marrow Sand Unit, Texas County, Oklahoma

Energy Technology Data Exchange (ETDEWEB)

Wheeler,David M.; Miller, William A.; Wilson, Travis C.

2002-03-11

The Eva South Morrow Sand Unit is located in western Texas County, Oklahoma. The field produces from an upper Morrow sandstone, termed the Eva sandstone, deposited in a transgressive valley-fill sequence. The field is defined as a combination structural stratigraphic trap; the reservoir lies in a convex up -dip bend in the valley and is truncated on the west side by the Teepee Creek fault. Although the field has been a successful waterflood since 1993, reservoir heterogeneity and compartmentalization has impeded overall sweep efficiency. A 4.25 square mile high-resolution, three component three-dimensional (3C3D) seismic survey was acquired in order to improve reservoir characterization and pinpoint the optimal location of a new horizontal producing well, the ESU 13-H.

Head animapäeva soovivad Petja ja hunt / Tiit Tuumalu

Index Scriptorium Estoniae

Tuumalu, Tiit, 1971-

2008-01-01

Animaürituste sari "Animateek" tähistab täna rahvusvahelist animapäeva, näidates Suzie Templetoni animafilmi (32 min) Sergei Prokofjevi muusikateose alusel "Petja ja hunt" : Suurbritannia - Norra - Poola 2006. Filmi tutvustab üks selle juhtanimaatoreid Krzysztof Brzozowski

Fatores anteriores ao ingresso como preditivos de evasão nos anos iniciais dos cursos superiores de tecnologia

OpenAIRE

Rafaela de Menezes Souza Brissac

2009-01-01

Resumo: A evasão de estudantes do ensino superior evidencia-se como fenômeno complexo, com conseqüências de ordem pessoal, institucional e social. Entre os estudos que buscam aprofundar o conhecimento sobre este fenômeno encontram-se os que se detém a pesquisar as causas e fatores associados à evasão de alunos neste nível de ensino. No que se refere às variáveis associadas à ocorrência da evasão, os estudos têm mostrado que é possível localizar fatores que são anteriores ao ingresso do estuda...

An innovative exercise method to simulate orbital EVA work - Applications to PLSS automatic controls

Science.gov (United States)

Lantz, Renee; Vykukal, H.; Webbon, Bruce

1987-01-01

An exercise method has been proposed which may satisfy the current need for a laboratory simulation representative of muscular, cardiovascular, respiratory, and thermoregulatory responses to work during orbital extravehicular activity (EVA). The simulation incorporates arm crank ergometry with a unique body support mechanism that allows all body position stabilization forces to be reacted at the feet. By instituting this exercise method in laboratory experimentation, an advanced portable life support system (PLSS) thermoregulatory control system can be designed to more accurately reflect the specific work requirements of orbital EVA.

Adaptation of a nursing home culture change research instrument for frontline staff quality improvement use.

Science.gov (United States)

Hartmann, Christine W; Palmer, Jennifer A; Mills, Whitney L; Pimentel, Camilla B; Allen, Rebecca S; Wewiorski, Nancy J; Dillon, Kristen R; Snow, A Lynn

2017-08-01

Enhanced interpersonal relationships and meaningful resident engagement in daily life are central to nursing home cultural transformation, yet these critical components of person-centered care may be difficult for frontline staff to measure using traditional research instruments. To address the need for easy-to-use instruments to help nursing home staff members evaluate and improve person-centered care, the psychometric method of cognitive-based interviewing was used to adapt a structured observation instrument originally developed for researchers and nursing home surveyors. Twenty-eight staff members from 2 Veterans Health Administration (VHA) nursing homes participated in 1 of 3 rounds of cognitive-based interviews, using the instrument in real-life situations. Modifications to the original instrument were guided by a cognitive processing model of instrument refinement. Following 2 rounds of cognitive interviews, pretesting of the revised instrument, and another round of cognitive interviews, the resulting set of 3 short instruments mirrored the concepts of the original longer instrument but were significantly easier for frontline staff to understand and use. Final results indicated frontline staff found the revised instruments feasible to use and clinically relevant in measuring and improving the lived experience of a changing culture. This article provides a framework for developing or adapting other measurement tools for frontline culture change efforts in nursing homes, in addition to reporting on a practical set of instruments to measure aspects of person-centered care. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Taju vormiv arhitektuur / Eva Castro, Holger Kehne ; interv. Inga Raukas

Index Scriptorium Estoniae

Castro, Eva

2002-01-01

Londoni arhitektuuribüroo Plasma Studio arhitektid Eva Castro (s. 1969 Argentiinas) ja Holger Kehne (s. 1970 Saksamaal) räägivad oma tööst ja arhitektuurist. Loetletud büroo tähtsamad arhitektuuriauhinnad ja projektid. Osalesid 5. Põhja- ja Baltimaade arhitektuuritriennaalil

Effect of STS space suit on astronaut dominant upper limb EVA work performance

Science.gov (United States)

Greenisen, Michael C.

1987-01-01

The STS Space Suited and unsuited dominant upper limb performance was evaluated in order to quantify future EVA astronaut skeletal muscle upper limb performance expectations. Testing was performed with subjects standing in EVA STS foot restraints. Data was collected with a CYBEX Dynamometer enclosed in a waterproof container. Control data was taken in one g. During one g testing, weight of the Space Suit was relieved from the subject via an overhead crane with a special connection to the PLSS of the suit. Experimental data was acquired during simulated zero g, accomplished by neutral buoyancy in the Weightless Environment Training Facility. Unsuited subjects became neutrally buoyant via SCUBA BC vests. Actual zero g experimental data was collected during parabolic arc flights on board NASA's modified KC-135 aircraft. During all test conditions, subjects performed five EVA work tasks requiring dominant upper limb performance and ten individual joint articulation movements. Dynamometer velocities for each tested movement were 0 deg/sec, 30 or 60 deg/sec and 120 or 180 deg/sec, depending on the test, with three repetitions per test. Performance was measured in foot pounds of torque.

Design of improved detection instrumentation for the annulus gas system for wolsong 2

International Nuclear Information System (INIS)

Kim, Seog Nam; Koo, Jun Mo; Chang, Ik Ho; Jung, Ho Chang; Han, Sang Joon

1996-01-01

The improved and advanced Annulus Gas System (AGS) has been developed for Wolsong 2 to satisfy the requirements of the regulatory body. The Atomic Energy Control Board (AECB) required a shorter detection time following a small leak from a pressure tube and/or calandria tube. This paper describes licensing requirements, functional requirements and detail design description for the AGS. The Wolsong unit No. 1 AGS was designed to operate as a stagnant system normally requiring only pressure regulation and having provisions for purging. The improved AGS involves the adoption of gas recirculation in AGS, duplication of dew point indicators with additional instrumentation and sampling provisions to prompt operator action. The improved system operates in the recirculation mode with continuous dew point measurement for leak detection. An AGS with improved detection instrumentation is provided. 8 refs., 3 figs. (author)

Strategy for improving instrumentation and control in operating nuclear power plants

International Nuclear Information System (INIS)

Abad Bassols, L.; Nino Perote, R.

1996-01-01

There are three basic reasons why nuclear power plants need to systematically upgrade their instrumentation and control equipment: Obsolete instrumentation and lack spares Little capacity of flexibility for extension Possibility of attaining better systems integration and improving systems-operations interface This article shows how to approach these issues using the following strategies: Use of distributed control systems and PLCs for control, signalling, command, communications, etc, in both nuclear and conventional applications Upgrading of process instrumentation equipment, sensors, transmitters, etc Upgrading of alarm-signalling systems In each group of equipment items consideration should be given to: Aspects regarding manufacturers-suppliers Effects on design, adaptation and documentation of operating plants Effects on the training and handling skills of operation and maintenance staff Strategy for incorporating the new system into the Plant with minimum impact on operation (Author)

Heat shrinkage of electron beam modified EVA

International Nuclear Information System (INIS)

Datta, S.K.; Chaki, T.K.; Bhowmick, A.K.

1997-01-01

Heat shrinkage of electron beam modified ethylene vinyl acetate copolymer (EVA) has been investigated over a range of times, temperatures, stretching, irradiation doses and trimethylolpropane trimethacrylate (TMPTMA) levels. The irradiated (radiation dose 50 kGy and TMPTMA level 1%) and stretched (100% elongation) sample shrinks to a maximum level when kept at 453K temperature for 60 s. The heat shrinkage of samples irradiated with radiation doses of 20, 50, 100 and 150 kGy increases sharply with increasing stretching in the initial stage. Amnesia rating decreases with increasing radiation dose and TMPTMA level as well as gel content. The high radiation dose and TMPTMA level lower the heat shrinkage due to the chain scission. The effect of temperature at which extension is carried out on heat shrinkage is marginal. The irradiated (radiation dose 50 kGy and TMPTMA level 1%) EVA tubes of different dimensions expanded in a laboratory grade tube expander show similar behaviour at 453K and 60 s. The X-ray and DSC studies reveal that the crystallinity increases on stretching due to orientation of chains and it decreases to a considerable extent on heat shrinking. The theoretical and experimental values of heat shrinkage for tubes and rectangular strips are in good accord, when the radiation dose is 50 kGy and TMPTMA level 1%. (author)

Heat shrinkage of electron beam modified EVA

Energy Technology Data Exchange (ETDEWEB)

Datta, S.K.; Chaki, T.K.; Bhowmick, A.K. [Indian Institute of Technology, Kharagpur (India). Rubber Technology Center; Tikku, V.K.; Pradhan, N.K. [NICCO Corporation Ltd., (Cable Div.), Calcutta (India)

1997-10-01

Heat shrinkage of electron beam modified ethylene vinyl acetate copolymer (EVA) has been investigated over a range of times, temperatures, stretching, irradiation doses and trimethylolpropane trimethacrylate (TMPTMA) levels. The irradiated (radiation dose 50 kGy and TMPTMA level 1%) and stretched (100% elongation) sample shrinks to a maximum level when kept at 453K temperature for 60 s. The heat shrinkage of samples irradiated with radiation doses of 20, 50, 100 and 150 kGy increases sharply with increasing stretching in the initial stage. Amnesia rating decreases with increasing radiation dose and TMPTMA level as well as gel content. The high radiation dose and TMPTMA level lower the heat shrinkage due to the chain scission. The effect of temperature at which extension is carried out on heat shrinkage is marginal. The irradiated (radiation dose 50 kGy and TMPTMA level 1%) EVA tubes of different dimensions expanded in a laboratory grade tube expander show similar behaviour at 453K and 60 s. The X-ray and DSC studies reveal that the crystallinity increases on stretching due to orientation of chains and it decreases to a considerable extent on heat shrinking. The theoretical and experimental values of heat shrinkage for tubes and rectangular strips are in good accord, when the radiation dose is 50 kGy and TMPTMA level 1%. (author).

Policy Instruments to Improve Energy Performance of Existing Owner Occupied Dwellings

Directory of Open Access Journals (Sweden)

Lorraine Colette Murphy

2016-11-01

Full Text Available The aim of this thesis is to add knowledge to the role and impact of policy instruments in meeting energy performance ambition in the existing owner occupied housing stock. The focus was instruments available in the Netherlands in 2011 and 2012. These instruments represented the ‘on the ground’ efforts to meet climate change targets and many continue to do so today in the same or slightly altered forms. At international level there is a recognized need to keep global temperatures within the range of 1.5 - 2°C above pre-industrial levels (Carrington, 2016. At European level, the 2020 package contains a series of binding legislation to help the EU meet its more immediate climate and energy targets. 2020 targets include 20% reduction in greenhouse gas emission, 20% of EU energy obtained from renewable sources and 20% improvement in energy efficiency. 2020 targets for the Netherlands are a 20% reduction in greenhouse gas emissions and a 14% increase in energy generation from renewable sources (Vringer et al., 2014. A raft of policies has been produced over the last number of decades from international to local level to orientate action towards targets. At European level the Energy Performance of Buildings Directive (EPBD drives efforts at reducing energy among one of the biggest players, the building sector. By requiring a mandatory certificate at the point of sale and rent of buildings and making regulatory demands on existing buildings the EPBD upped the ante of what could be expected from the building sector, but especially the existing dwelling stock. National governments have already been tackling existing dwellings for decades propelled by the energy crisis and later by climate change policy. Information campaigns, subsidies, energy taxes, energy loans and tailored advice are among the instruments that have been available to homeowners to carry out works on their dwellings to reduce energy consumption. In recent years, the pace of efforts

Astronauts Allen and Gemar during extravehicular activity (EVA) training in CCT

Science.gov (United States)

1994-01-01

Astronauts Charles D. (Sam) Gemar, and Andrew M. Allen participate in a training exercise at JSC's Crew Compartment Trainer (CCT), located in the Space Vehicle Mockup Facility. Gemar sits inside the airlock as Allen reviews procedures for EVA.

EVA Swab Tool to Support Planetary Protection and Astrobiology Evaluations

Science.gov (United States)

Rucker, Michelle A.; Hood, Drew; Walker, Mary; Venkateswaran, Kasthuri J.; Schuerger, Andrew C.

2018-01-01

various pressure environments. To further minimize cost, the design team acquired extensive ground test experience in a relevant flight environment by piggy-backing onto suited crew training runs. These training runs allowed the project to validate tool interfaces with pressurized EVA gloves and collect user feedback on the tool design and function, as well as characterize baseline microbial data for different types of spacesuits. In general, test subjects found the EVA Swab Kit relatively straightforward to operate, but identified a number of design improvements that will be incorporated into the final design. Although originally intended to help characterize human forward contaminants, this tool has other potential applications, such as for collecting and preserving space-exposed materials to support astrobiology experiments.

Võidupüha-Jaanipäeva tähistamine Clevelandis / Hans Ruus

Index Scriptorium Estoniae

Ruus, Hans

2006-01-01

25. juunil Clevelandi Eesti Kultuuraias. Sellel aastal tähistas kultuuraed 40-ndat asutamise aastapäeva. Meenutati monumendi avamist, peakõnelejaks Toomas Tubalkain, mälestati sõjas hukkunud eestlasi

Mis on "Tänapäeva apokalüpsis"? / Kalmer Saar

Index Scriptorium Estoniae

Saar, Kalmer

2006-01-01

Francis Ford Coppola suurfilmi "Tänapäeva apokalüpsis" autoriversioon "Apocalypse Now Redux" (Ameerika Ühendriigid 2001/1979) lõpetab USA kultusfilmide festivali kinos "Sõprus". Lisa : Jaan Ruusi "Apocalypse Now Redux" selgitab autoriversiooni - director's cut - mõistet

IAS15 inflation adjustments and EVA: empirical evidence from a highly variable inflation regime

Directory of Open Access Journals (Sweden)

Pierre Erasmus

2011-08-01

Full Text Available Inflation can have a pronounced effect on the financial performance of a firm. This study makes inflation adjustments to a firm’s cost of sales, depreciation, level of gearing and assets in line with International Accounting Standard 15 (IAS15 in order to calculate an inflation-adjusted version of the economic value added (EVA measure. The study was conducted using data from South African industrial firms during a period characterised by highly variable inflation levels (1991-2005. The results indicate that during this period there were significant differences between the nominal and real values of the firms’ EVAs

Diagnostic criteria for enlarged vestibular aqueduct (EVA) on CT of the temporal bones. Borderline cases of EVA

International Nuclear Information System (INIS)

Matsumoto, Mariko; Hoshino, Tomoyuki; Kikura, Mikino; Kikawada, Keiko; Kikawada, Toru

2005-01-01

The objective of this study was to examine measurements of the vestibular aqueduct on axial CT figures and to examine the cases with borderline EVA. The width of the vestibular aqueduct was measured in two places, the midpoint of the duct and the external aperture in the posterior cranial fossa. Criteria was as follow: Enlargement; ≥1.5 mm at the midpoint, ≥2 mm at the aperture, Borderline; 1-1.4 mm at the midpoint, 1.5-1.9 mm at the aperture. Three hundred forty-five cases with CT scans of the temporal bones taken during July 2003 to June 2004 in the secondary ENT referral center. Those patients include sensorinearal, mixed or conductive deafness, vertigo, ear infections and other ear diseases. Enlarged vestibular aqueduct was found in 10 ears with sensorineural deafness (SD) and 2 ears without SD. Borderline measurements were found in 19 ears with SD and 33 ears without SD. The enlarged midpoint measurement was not seen in the cases without SD. More than 1.5 mm of the definition for the enlargement at the midpoint of the vestibular aqueduct seemed to be appropriate in the clinical situation. The measurement at the midpoint of the duct is more reliable than at the external aperture. The conductive component in EVA Syndrome with mixed hearing loss is present only at the lower frequencies (250, 500 Hz), not at the middle and higer frequencies. Long-term follow-up of hearing should be done in the borderline cases with check-up of PDS gene anomaly if necessary. (author)

The Effect of Nano Loading and Ultrasonic Compounding of EVA/LDPE/Nano-magnesium Hydroxide on Mechanical Properties and Distribution of Nano Particles

Science.gov (United States)

Azman, I. A.; Salleh, R. M.; Alauddin, S. M.; Shueb, M. I.

2018-05-01

Blends of Ethylene Vinyl Acetate (EVA) and Low-Density Polyethylene (LDPE) are promising composite which have good mechanical properties to environmental stress cracking. However, they lack fire resistant properties, which limits it usage in wire and cable industry. In order to improve flame retardancy ability, a range of nano-magnesium hydroxide (nano-MH) loading which is from 0 phr to maximum of 20 phr with ultrasonic extrusion 0-100 kHz frequencies have been introduced. Ultrasonic extrusion was used to improve the distribution of nano-MH. It was found that, 10 phr of nano loading with 100 kHz ultrasonic assisted has greater tensile strength compared to the nanocomposite without ultrasonication. Further increase of nano MH loading, will decrease the tensile properties. Better elongation at break was observed at10 phr nano-MH with the frequency of 50 kHz. The sample of 20 phr of nanoMH assisted with 50 kHz ultrasonic exhibits good flexural properties while 10 phr of nano-MH without the ultrasonic assisted demonstrates good in izod impact properties. From the evaluation of mechanical properties studied, it was found that 10 phr of nano-MH has shown the best performance among all the samples tested for EVA/LDPE/nano-MH composites. Transmission Electron Microscopy (TEM) has been conducted on 10 phr sample with different frequencies in order to observe the distribution of nano-MH particles. The sample with 100 kHz frequency shows more uniform dispersion of nano-MH in EVA/LDPE composites. This investigation indicates that the ultrasonic technology can enhance the mechanical properties studied as well as the dispersion of nano particles in the composite.

Pengaruh Pengungkapan Intellectual Capital (IC dan Economic Value Added (EVA terhadap Harga Saham Perusahaan Manufaktur yang terdaftar di BEI

Directory of Open Access Journals (Sweden)

Achmad Fauzi

2015-07-01

Full Text Available This study aims at finding out if The Influence of Intellectual Capital (ICand Economic Value Added (EVA on Stock Price of Manufacturing Companies listed on the Indonesia Stock Exchange (BEI in 2012. The hypothesis of this study is : There is Influence of Intellectual Capital (IC and Economic Value Added (EVA on Stock Price of Manufacturing Company listed on the Indonesia Stock Exchange (BEI in 2012. The method used is the author of the survey method with a quantitative approach . This study population is the entire manufacturing companies listed on the Stock Exchange in 2012 his sampling technique is random sampling as many as 36 samples .. Correlation Coefficient significance test ( Test A of 0.512 , indicating that there is a middle relationship between IC and EVA on Stock Price. The results of the coefficient of determination ( R2 Test stated that R2 is 0.262 or 26.2% . This shows that the percentage contribution of the effect of independent variables ( IC and EVA on the dependent variable ( stock price of 26.2 % . Or variations of the independent variables used in the model ( IC and EVA are able to explain 26.2% of variation in the dependent variable ( stock price . While the remaining 73.8 % are influenced or explained by other variables not included in this research model .

Utilização de NBR modificada com grupos 2-oxazolina em misturas de NBR/EVA Utilization of 2-oxazoline modified NBR in NBR/EVA blends

Directory of Open Access Journals (Sweden)

Mauricio S. M. Almeida

2003-06-01

Full Text Available Misturas envolvendo borracha nitrílica e copolímeros de etileno-acetato de vinila na proporção 70:30 % em peso, foram preparadas na presença de borracha nitrílica funcionalizada com 2-oxazolina isoladamente ou combinada com EVA funcionalizado com grupos hidroxila, carboxila ou mercaptana. A reação entre os grupos funcionais foi verificada por análise de FTIR da fração insolúvel de amostras não vulcanizadas e pelo decréscimo nos valores de tan delta nos ensaios dinâmico-mecânicos. A utilização desses copolímeros funcionalizados não influenciou significativamente as propriedades mecânicas, provavelmente devido à proporção da mistura utilizada (rica em NBR o que facilita a localização da NBR funcionalizada no interior da fase elastomérica.Nitrile rubber/ethylene-vinyl acetate copolymer (NBR/EVA blends with ratio of 70/30 wt% were prepared in the presence of functionalized NBR with 2-oxazoline groups. This functionalized copolymer was employed alone or in combination with EVA copolymer functionalized with hydroxyl, carboxyl or mercaptan groups. The reaction between the functional groups was confirmed by FTIR analysis of the unvulcanized samples insoluble fraction, and by the decrease in the tan delta values. The mechanical properties were not substantially affected by the presence of these functionalized copolymers, probably due to the proportion of blend composition (with high amount of NBR, thus forcing the location of functionalized NBR inside the elastomer phase.

Analisis Determinasi Financial Performance Perusahaan Industri Manufaktur Makanan Dan Minuman Yang Go Public Suatu Pendekatan Metode Economic Value Added (EVA

Directory of Open Access Journals (Sweden)

Azhar Affandi

2011-04-01

Full Text Available The aim of this study is to obtain empirical evidence concerning the effect of Financial Performance Determinant (Capital Structure and Profit Margin on effectively Economic Value Added (EVA method at the food and beverage manufacture business sectors. The results of this study is expected to contribute for the development of financial management and strategic management. The study was carried out at the food and beverage manufacture business sectors registered in Bursa Efek Indonesia (BEI. The characteristic of this study is confirmatory research. The research method used is associative and explanatory, and to hypothesis testing of the research has used multiple regression. Sampling method is used purposive sampling with total sample are 15 corporate registered in Bursa Efek Indonesia during 2006-2007 period. While for data processing is used SPSS 14.0 for windows programs. The result of this study is: The first hypothesis testing founded theres the significant effect of capital structure on effectively Economic Value Added (EVA. The second hypothesis testing founded theres the significant effect of profit margin on effectively Economic Value Added (EVA. So, in the EVA predicting can used capital structure and profit margin indicators, because capital structure and profit margin both have a significant effect on effectively Economic Value Added (EVA.

Closed-Loop, Non-Venting Thermal Control for Mars EVA Suits, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — NASA seeks new thermal control technology for EVA suits on Mars. The system must be closed-loop and non-venting, have negligible impact on the Martian environment,...

Improved Instrument for Detecting Water and Ice in Soil

Science.gov (United States)

Buehler, Martin; Chin, Keith; Keymeulen, Didler; McCann, Timothy; Seshadri, Suesh; Anderson, Robert

2009-01-01

An instrument measures electrical properties of relatively dry soils to determine their liquid water and/or ice contents. Designed as a prototype of instruments for measuring the liquid-water and ice contents of lunar and planetary soils, the apparatus could also be utilized for similar purposes in research and agriculture involving terrestrial desert soils and sands, and perhaps for measuring ice buildup on aircraft surfaces. This instrument is an improved version of the apparatus described in Measuring Low Concentrations of Liquid Water and Ice in Soil (NPO-41822), NASA Tech Briefs, Vol. 33, No. 2 (February 2009), page 22. The designs of both versions are based on the fact that the electrical behavior of a typical soil sample is well approximated by a network of resistors and capacitors in which resistances decrease and capacitances increase (and the magnitude and phase angle of impedance changes accordingly) with increasing water content. The previous version included an impedance spectrometer and a jar into which a sample of soil was placed. Four stainless-steel screws at the bottom of the jar were used as electrodes of a fourpoint impedance probe connected to the spectrometer. The present instrument does not include a sample jar and can be operated without acquiring or handling samples. Its impedance probe consists of a compact assembly of electrodes housed near the tip of a cylinder. The electrodes protrude slightly from the cylinder (see Figure 1). In preparation for measurements, the cylinder is simply pushed into the ground to bring the soil into contact with the electrodes.

ANALISIS PENGARUH EVA DAN MVA TERHADAP RETURN SAHAM PADA INDUSTRI PROPERTI DI BURSA EFEK INDONESIA PERIODE 2007-2012

Directory of Open Access Journals (Sweden)

Ryan Pahlawan

2015-04-01

Full Text Available Abstrak: Tujuan dari penelitian ini adalah untuk mengetahui dan menganalisis: (1 pengaruh Economic Value Added (EVA terhadap return saham (2 pengaruh Market Value Added (MVA terhadap return saham (3 pengaruh Economic Value Added (EVA dan Market Value Added (MVA terhadap return saham antara variabel kinerja keuangan industri properti di Bursa Efek Indonesia pada periode 2007-2012. Kegunaan teoritis adalah untuk memberikan kontribusi tentang pengetahuan manajemen keuangan, yang dapat digunakan sebagai acuan untuk penelitian berikutnya kinerja keuangan terutama tentang industri properti di Bursa Efek Indonesia. Kegunaan praktis adalah untuk mengetahui pengaruh tingkat Economic Value Added (EVA dan Market Value Added (MVA terhadap kinerja keuangan untuk kontribusi memberi kepada manajemen properti umum dalam mengelola variabel kinerja industri properti Bursa Efek Indonesia.Penelitian ini menggunakan data sekunder yang dikumpulkan dari data Bursa Efek Indonesia, dan Departemen Riset menurut sifat laporan keuangan pada periode 2007-2012. Sampel adalah 54 variabel dan dianalisis dengan regresi berganda metode statistik linier. Total nilai determinasi adalah 0,368, artinya ini adalah 36,8% informasi dalam data dapat dijelaskan oleh model dan 63,2% di bawah variabel lain dan error. Kesimpulan dari penelitian ini adalah: (1 Variabel Economic Value Added (EVA berpengaruh positif terhadap return saham; (2 Variabel Market Value Added (MVA memiliki pengaruh negatif terhadap Return Saham; Mengacu pada kesimpulan penelitian diatas maka disarankan adalah: (1 Dioptimalkan Economic Value Added (EVA untuk mencapai pendapatan dan keuntungan dari return saham (2 Mengelola Variabel Market Value Added (MVA pada kondisi baik untuk menjaga stabilitas keuangan dan mendapatkan dipercaya dari investor Bursa Efek Indonesia (3 Fokus ke Manajemen Risiko, Jasa, perusahaan Visi & Misi, dan Active keterampilan dan pengetahuan karyawan perusahaan yang lebih tinggi untuk

Architectures/Algorithms/Tools for Ultra-Low Power, Compact EVA Digital Radio, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — The EVA digital radio imposes tight constraints on power consumption, latency, throughput, form factor, reconfigurability, single event upset and fault tolerance,...

STS-31 crew training: firefighting, food tasting, EVA prep and post

Science.gov (United States)

1990-03-01

The Space Shuttle crew is shown lighting a pond of gasoline and then performing firefighting tasks. The crew is also shown tasting food including lemonade, chicken casserole, and tortillas, and performing extravehicular activity (EVA) equipment checkouts in the CCT middeck and airlock.

Augmented robotic device for EVA hand manoeuvres

Science.gov (United States)

Matheson, Eloise; Brooker, Graham

2012-12-01

During extravehicular activities (EVAs), pressurised space suits can lead to difficulties in performing hand manoeuvres and fatigue. This is often the cause of EVAs being terminated early, or taking longer to complete. Assistive robotic gloves can be used to augment the natural motion of a human hand, meaning work can be carried out more efficiently with less stress to the astronaut. Lightweight and low profile solutions must be found in order for the assistive robotic glove to be easily integrated with a space suit pressure garment. Pneumatic muscle actuators combined with force sensors are one such solution. These actuators are extremely light, yet can output high forces using pressurised gases as the actuation drive. Their movement is omnidirectional, so when combined with a flexible exoskeleton that itself provides a degree of freedom of movement, individual fingers can be controlled during flexion and extension. This setup allows actuators and other hardware to be stored remotely on the user's body, resulting in the least possible mass being supported by the hand. Two prototype gloves have been developed at the University of Sydney; prototype I using a fibreglass exoskeleton to provide flexion force, and prototype II using torsion springs to achieve the same result. The gloves have been designed to increase the ease of human movements, rather than to add unnatural ability to the hand. A state space control algorithm has been developed to ensure that human initiated movements are recognised, and calibration methods have been implemented to accommodate the different characteristics of each wearer's hands. For this calibration technique, it was necessary to take into account the natural tremors of the human hand which may have otherwise initiated unexpected control signals. Prototype I was able to actuate the user's hand in 1 degree of freedom (DOF) from full flexion to partial extension, and prototype II actuated a user's finger in 2 DOF with forces achieved

Ethylene vinyl acetate (EVA) as a new drug carrier for 3D printed medical drug delivery devices

DEFF Research Database (Denmark)

Genina, Natalja; Hollander, Jenny; Jukarainen, Harri

2016-01-01

The main purpose of this work was to investigate the printability of different grades of ethylene vinyl acetate (EVA) copolymers as new feedstock material for fused-deposition modeling (FDM™)-based 3D printing technology in fabrication of custom-made T-shaped intrauterine systems (IUS......) and subcutaneous rods (SR). The goal was to select an EVA grade with optimal properties, namely vinyl acetate content, melting index, flexural modulus, for 3D printing of implantable prototypes with the drug incorporated within the entire matrix of the medical devices. Indomethacin was used as a model drug...... affected the drug release profiles from the filaments and printed prototype products: faster release from the prototypes over 30 days in the in vitro tests. To conclude, this study indicates that certain grades of EVA were applicable feedstock material for 3D printing to produce drug-loaded implantable...

Use of the Remote Access Virtual Environment Network (RAVEN) for coordinated IVA-EVA astronaut training and evaluation.

Science.gov (United States)

Cater, J P; Huffman, S D

1995-01-01

This paper presents a unique virtual reality training and assessment tool developed under a NASA grant, "Research in Human Factors Aspects of Enhanced Virtual Environments for Extravehicular Activity (EVA) Training and Simulation." The Remote Access Virtual Environment Network (RAVEN) was created to train and evaluate the verbal, mental and physical coordination required between the intravehicular (IVA) astronaut operating the Remote Manipulator System (RMS) arm and the EVA astronaut standing in foot restraints on the end of the RMS. The RAVEN system currently allows the EVA astronaut to approach the Hubble Space Telescope (HST) under control of the IVA astronaut and grasp, remove, and replace the Wide Field Planetary Camera drawer from its location in the HST. Two viewpoints, one stereoscopic and one monoscopic, were created all linked by Ethernet, that provided the two trainees with the appropriate training environments.

The importance of ROE for calculating EVA Equity: the case of Motor Jikov Strojírenská, a.s.

Directory of Open Access Journals (Sweden)

Mareček Jan

2017-01-01

Full Text Available A remarkable success depends on a variety of factors, one of which is the ability to motivate the employees, increasing motivation of managers, measuring business processes and measuring and observing values of the company. The tangible results are also shown by the indicator of return on equity (ROE. The article aims at reflecting the importance of ROE for the EVA Equity (economic value added for shareholders calculation of Motor Jikov Strojírenská, a.s. The data come from Albertina database. These are details of financial statements from 2000-2015. As a matter of fact, weighted average costs of capital, alternative cost value of equity capital and EVA Equity are calculated. Software Statistica and its sophisticated tool data mining - automated neural networks was used for finding a correlation between EVA Equity indicator and ROE. In addition, 10,000 neural networks were generated, five of which with the best results have been stored. The results show that EVA Equity is not dependent on the ROE rate.

Flame retardancy and thermal behavior of intumescent flame-retardant EVA composites with an efficient triazine-based charring agent

Science.gov (United States)

Xu, Bo; Ma, Wen; Wu, Xiao; Qian, Lijun; Jiang, Shan

2018-04-01

Intumescent flame retardant (IFR) EVA composites were prepared based on a hyperbranched triazine charring-foaming agent (HTCFA) and ammonium polyphosphate (APP). The synergistic effect of HTCFA and APP on the flame retardancy and thermal behavior of the composites were investigated through flammability tests, cone calorimeter measurements, thermogravimetric analysis (TGA) including evolved gas analysis (TG-IR) and residue analysis (Fourier transform infrared (FTIR), laser Raman spectroscopy (LRS), x-ray Photoelectron Spectroscopy (XPS) and scanning electron microscopy (SEM)). The flammability test results showed HTCFA/APP (1/3) system presented the best synergistic effect in flame-retardant EVA composites with the highest LOI value and UL-94 V-0 rating. As for cone calorimeter results, IFR changed the combustion behavior of EVA and resulted in remarkable decrease of flammability and smoke product. TGA results showed the synergistic effect between APP and HTCFA could strengthen the char-forming ability of composites. TG-IR results indicated the melt viscosities and gas release with increasing temperature were well-correlated for EVA/IFR composite. The residue analysis results from SEM, LRS, FT-IR and XPS revealed IFR promoted forming more compact graphitic char layer, connected by rich P–O–C and P–N structures.

Korp! Filiae Patriae 85. aastapäeva pidustused Los Angeleses / Lumme Erilt

Index Scriptorium Estoniae

Erilt, Lumme

2005-01-01

5. novembril 2005 tähistas Filiae Patriae Kalifornia koondis Los Angelese Eesti Majas piduliku õestuspeo ning ühise perekonnaõhtuga koos korp! Rotaliaga aastapäeva. Peeti kõnesid, oli tervitusi, muusikat, palju lilli

Morphology, Microstructure and Physico-Mechanical Properties of Pasargad Bitumen, Modified by Ethylene-Vinyl Acetate Copolymer (EVA and Nanoclay

Directory of Open Access Journals (Sweden)

Arezoo Ghaempour

2015-09-01

Full Text Available Due to the characteristics such as flexibility, adhesion, hydrophobicity and low price, bitumen is used in different construction and insulation industries. The major problem with the bitumen material is its restricted physico-mechanical properties, mainly high temperature rutting and low temperature cracking. The aim of this work was to modify bitumen, produced in Tabriz Pasargad Oil Company, and evaluation of its different properties to make it suitable for the weather conditions of North West of Iran. The physico-mechanical, morphological and rheological characteristics of EVA/Cloisite 15A modified bitumen were studied.Two different feeding instructions were used in the mixing of bitumen with modifiers.In the first method, EVA and Cloisite 15A nanoclay were simultaneously added into the molten bitumen and in the second method, EVA and Cloisite 15A were premixed in an internal mixer before adding the polymer/nanoclay nanocomposite into the molten bitumen. The results showed that addition of nanoclay and polymer into the bitumen, led increased softening point and a decrease in the penetration of base bitumen, in which the extent of changes, was higher for the samples prepared by masterbatch method. The rheological properties of the pre-mixed samples exhibited more improvement and these samples showed more elastic behavior. The results of optical microscopy showed that the pre-mixing of polymer and nanoclay led to a more uniform distribution of the swollen polymer phase at the base bitumen. These samples also showed higher morphology stability than those samples prepared in single step. These effects were related to the probable localization of nanoclay at the interface of the two phases.

Eesti Vabariigi 89. aastapäeva tähistamine

Index Scriptorium Estoniae

2007-01-01

Eesti iseseisvuspäeva tähistamisest Londonis. 20. veebruaril 2007 korraldas Eesti Vabariigi suursaatkond vastuvõtu Crown Plaza hotellis, kus ligi 300 külalist tervitas president Toomas Hendrik Ilves. 19. veebruaril 2007 külastas president Oxfordi, kus ta esines kõnega üliõpilastele. Lisatud foto, millel on kujutatud president Toomas Hendrik Ilves, kolonelleitnant Lauri Einre ja Eesti Vabariigi saadik Londonis dr. Margus Laidre

Instrumentation and control of future sodium cooled fast reactors - Design improvements

International Nuclear Information System (INIS)

Madhusoodanan, K.; Sakthivel, M.; Chellapandi, P.

2013-06-01

India's fast reactor program started with the 40 MWt Fast Breeder Test Reactor. 500 MWe Prototype Fast Breeder Reactor (PFBR) is currently under construction at Kalpakkam. Safety of PFBR is enhanced by improved design features of I and C system. Since the design of Instrumentation and control (I and C) of PFBR, considerable improvements in terms of advancement in technology and indigenization has taken place. Further improvements in I and C is proposed for solving many of the difficulties faced during the design and construction phases of PFBR. Design improvements proposed are covered in this paper which will make the implementation and maintenance of I and C of future SFRs easier. (authors)

Robonaut 2 - IVA Experiments On-Board ISS and Development Towards EVA Capability

Science.gov (United States)

Diftler, Myron; Hulse, Aaron; Badger, Julia; Thackston, Allison; Rogers, Jonathan

2014-01-01

Robonaut 2 (R2) has completed its fixed base activities on-board the ISS and is scheduled to receive its climbing legs in early 2014. In its continuing line of firsts, the R2 torso finished up its on-orbit activities on its stanchion with the manipulation of space blanket materials and performed multiple tasks under teleoperation control by IVA astronauts. The successful completion of these two IVA experiments is a key step in Robonaut's progression towards an EVA capability. Integration with the legs and climbing inside the ISS will provide another important part of the experience that R2 will need prior to performing tasks on the outside of ISS. In support of these on-orbit activities, R2 has been traversing across handrails in simulated zero-g environments and working with EVA tools and equipment on the ground to determine manipulation strategies for an EVA Robonaut. R2 made significant advances in robotic manipulation of deformable materials in space while working with its softgoods task panel. This panel features quarter turn latches that secure a space blanket to the task panel structure. The space blanket covers two cloth cubes that are attached with Velcro to the structure. R2 was able to open and close the latches, pull back the blanket, and remove the cube underneath. R2 simulated cleaning up an EVA worksite as well, by replacing the cube and reattaching the blanket. In order to interact with the softgoods panel, R2 has both autonomously and with a human in the loop identified and localized these deformable objects. Using stereo color cameras, R2 identified characteristic elements on the softgoods panel then extracted the location and orientation of the object in its field of view using stereo disparity and kinematic transforms. R2 used both vision processing and supervisory control to successfully accomplish this important task. Teleoperation is a key capability for Robonaut's effectiveness as an EVA system. To build proficiency, crewmembers have

Tähistame Helen Kelleri 130. sünniaastapäeva

Index Scriptorium Estoniae

Keskküla, Raissa

2010-01-01

Helen Kellerist ja tema sünniaastapäeva tähistamisest, samuti Eesti Pimekurtide Tugiliidu ettevõtmistest: koostöölepingust Eesti Kujurite Ühendusega, punktkirjas väljaantud raamatust "Õppimise ime", Hilton/Perkins programmi kaasabil Eesti pimekurtide ja nägemis-liitpuudega lastega töötavate õpetajate ning töötajate koolitamiset

"Nad olid nuhkinud meie pulmapäeva välja!" / Aigi Viira

Index Scriptorium Estoniae

Viira, Aigi

2004-01-01

Vanemuise teatri draamajuht andis näitlejatest abielupaarile Herta Elvistele ja Lembit Eelmäele peale L. Razumovskaja näidendi "Vladimiri väljak" 30. okt. etendust üle lilled ja õnnitlused 50. pulma-aastapäeva puhul

The influence of Ca-Mg-Al hydrotalcite synthesized from brine water on thermal and mechanical properties of HTlc-EVA composite

International Nuclear Information System (INIS)

Karina, Wiwiek; Heraldy, Eddy; Pramono, Edi; Heriyanto,; Astuti, Shanti

2016-01-01

Ca-Mg-Al hydrotalcite-like compound (Ca-Mg-Al HTlc) was prepared by co-precipitation method using brine water that is well known as the desalination process waste water. The structure of Ca-Mg-Al HTlc was determined by X-Ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) analysis. Ca-Mg-Al HTlc was studied as a non-halogenated filler in ethylene vinyl acetate (EVA) matrix. Composites with different filler concentrations were prepared to evaluate the influence of Ca-Mg-Al HTlc on thermal and mechanical properties of EVA.The presence of Ca-Mg-Al HTlc in the composite has been confirmed by FTIR analysis. Thermal properties of composites show significant reduction of degradation temperature as well as the loading of HTlc in EVA. However, the total enthalpies combustion of composites with 1% and 5% HTlc loadings higher compared to neat EVA. Further, mechanical properties were determined by tensile test. The result shows that tensile strength and elongation at break of composites decrease relatively by Ca-Mg-Al HTlc addition

The influence of Ca-Mg-Al hydrotalcite synthesized from brine water on thermal and mechanical properties of HTlc-EVA composite

Energy Technology Data Exchange (ETDEWEB)

Karina, Wiwiek, E-mail: wiekarina@gmail.com; Heraldy, Eddy, E-mail: eheraldy@gmail.com; Pramono, Edi; Heriyanto,; Astuti, Shanti [Department of Chemistry, Faculty of Mathematics and Natural Sciences, Sebelas Maret University Jl. Ir. Sutami 36A, Kentingan, Surakarta 57126 (Indonesia)

2016-02-08

Ca-Mg-Al hydrotalcite-like compound (Ca-Mg-Al HTlc) was prepared by co-precipitation method using brine water that is well known as the desalination process waste water. The structure of Ca-Mg-Al HTlc was determined by X-Ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) analysis. Ca-Mg-Al HTlc was studied as a non-halogenated filler in ethylene vinyl acetate (EVA) matrix. Composites with different filler concentrations were prepared to evaluate the influence of Ca-Mg-Al HTlc on thermal and mechanical properties of EVA.The presence of Ca-Mg-Al HTlc in the composite has been confirmed by FTIR analysis. Thermal properties of composites show significant reduction of degradation temperature as well as the loading of HTlc in EVA. However, the total enthalpies combustion of composites with 1% and 5% HTlc loadings higher compared to neat EVA. Further, mechanical properties were determined by tensile test. The result shows that tensile strength and elongation at break of composites decrease relatively by Ca-Mg-Al HTlc addition.

Kunstnikuks pürgija vajab paari õigeaegset impulssi / Kaido Ole, Eva Unt

Index Scriptorium Estoniae

Ole, Kaido

2006-01-01

Antonia Claudio Carvalho meistriklass "Ava oma silmad/Open Your Eyes" 23.-27. I ja näitus 27. I-9. II Eesti Kunstiakadeemia galeriis. Meistriklassist vestlesid EKA maaliosakonna juhataja Kaido Ole ja maalieriala III kursuse üliõpilane Eva Unt

Evidence Report: Risk of Injury and Compromised Performance due to EVA Operations

Science.gov (United States)

Chappell, Steven P.; Norcross, Jason R.; Abercromby, Andrew F. J.; Bekdash, Omar S.; Benson, Elizabeth A.; Jarvis, Sarah L.; Conkin, Johnny; Gernhardt, Michael L.; House, Nancy; Jadwick, Jennifer;

Improvements in Speech Understanding With Wireless Binaural Broadband Digital Hearing Instruments in Adults With Sensorineural Hearing Loss

OpenAIRE

Kreisman, Brian M.; Mazevski, Annette G.; Schum, Donald J.; Sockalingam, Ravichandran

2010-01-01

This investigation examined whether speech intelligibility in noise can be improved using a new, binaural broadband hearing instrument system. Participants were 36 adults with symmetrical, sensorineural hearing loss (18 experienced hearing instrument users and 18 without prior experience). Participants were fit binaurally in a planned comparison, randomized crossover design study with binaural broadband hearing instruments and advanced digital hearing instruments. Following an adjustment peri...

Benchmarking as an Instrument for Improvement of Quality Management in Higher Education

Directory of Open Access Journals (Sweden)

Narimantas Kazimieras Paliulis

2015-06-01

Full Text Available Conditioned by globalisation and constant change, higher education institutions (HEIs are forced to pursue new instruments for quality assurance in higher education. States seem to pursue this aim by attempting to create an efficiently operating system of higher education that satisfies needs of diverse societal groups. Quality dimension is the most important element of efficient and effective higher education. From the perspective of a state, assessment and monitoring of quality are instruments for the management of processes of higher education. The article substantiates these statements using the evolution of the dimension of quality in the European and Lithuanian higher education in the course of the Bologna Process. The article also presents a benchmarking method and discusses its development and application tendencies in business organisations. Also, it looks at possibilities to apply this method in higher education. The main aim of this article is to explore benchmarking as an effective instrument for the improvement of performance quality in HEIs and complement the already implemented quality management systems. Another aim is to suggest this method to national agencies for quality assurance in higher education for monitoring and analysis of qualitative changes on the systematic level. The object of the article is the improvement of performance quality in HEIs. Benchmarking is proposed for the use in higher education on the institutional level as an instrument that complements presently introduced quality management systems in Lithuanian HEIs. This way, it will contribute to the formation of the culture of quality in higher education.

Klíčové ukazatele výkonnosti (KPI) a jejich vazba na vrcholový ukazatel EVA

OpenAIRE

Hanzlík, Kamil

2008-01-01

This thesis is concerned with a discussion of advantages, disadvantages and potencial areas of usage of the Economic Value Added (EVA) as a measure of value based management. The coherency of EVA with key performance indicators as a tool of effective management is also analysed. Mentioned are also several alternative concepts. This thesis further analyses practical application of key performance indicators in mobile telecommunication company T-Mobile and evaluates the implemented concept of E...

Increasing Laser Stability with Improved Electronic Instruments

Science.gov (United States)

Troxel, Daylin; Bennett, Aaron; Erickson, Christopher J.; Jones, Tyler; Durfee, Dallin S.

2010-03-01

We present several electronic instruments developed to implement an ultra-stable laser lock. These instruments include a high speed, low noise homodyne photo-detector; an ultrahigh stability, low noise current driver with high modulation bandwidth and digital control; a high-speed, low noise PID controller; a low-noise piezo driver; and a laser diode temperature controller. We will present the theory of operation for these instruments, design and construction techniques, and essential characteristics for each device.

Taasleitud kadunud ja unustatud kino / Jonathan L. Owen ; tõlkinud Eva Näripea

Index Scriptorium Estoniae

Owen, Jonathan L.

2011-01-01

Arvustus: Via Transversa : Lost cinema of the former Eastern bloc. Eds. Eva Näripea, Andreas Trossek. Special issue of Koht ja paik/Place and location :Studies in environmental aesthetics and semiotics VII. Tallinn, 2008

Flux Gain for Next-Generation Neutron-Scattering Instruments Resulting From Improved Supermirror Performance

International Nuclear Information System (INIS)

Rehm, C.

2001-01-01

Next-generation spallation neutron source facilities will offer instruments with unprecedented capabilities through simultaneous enhancement of source power and usage of advanced optical components. The Spallation Neutron Source (SNS), already under construction at Oak Ridge National Laboratory and scheduled to be completed by 2006, will provide greater than an order of magnitude more effective source flux than current state-of-the-art facilities, including the most advanced research reactors. An additional order of magnitude gain is expected through the use of new optical devices and instrumentation concepts. Many instrument designs require supermirror (SM) neutron guides with very high critical angles for total reflection. In this contribution, they discuss how the performance of modern neutron scattering instruments depends on the efficiency of these supermirrors. They outline ideas for enhancing the performance of the SM coatings, particularly for improving the reflectivity at the position of the critical wave vector transfer. A simulation program has been developed which allows different approaches for SM designs to be studied. Possible instrument performance gains are calculated for the example of the SNS reflectometer

Imposto de importação e evasão fiscal: uma investigação do caso brasileiro

Directory of Open Access Journals (Sweden)

Maria da Conceição Sampaio de Sousa

2008-03-01

Full Text Available Este trabalho mensura o impacto das alíquotas do imposto de importação sobre a evasão fiscal nas importações brasileiras oriundas dos Estados Unidos. Os resultados obtidos permitem concluir que as alíquotas tarifárias influenciam a evasão sob suas diferentes formas: subfaturamento e classificação incorreta de mercadorias. Estes resultados corroboram o modelo básico de evasão proposto por Allingham (1972 e se insere no debate sobre a relação entre a magnitude das alíquotas e o potencial para evasão. Nossos resultados mostram, ainda, a existência de não linearidades na relação entre alíquotas e evasão. Nos vários modelos testados, esse efeito cresce com a magnitude das tarifas, sugerindo que maiores alíquotas aumentam o custo de oportunidade da tributação e geram maiores incentivos para a sonegação. Por fim, com respeito à relação entre o nível de complexidade da estrutura tributária e a evasão, nosso trabalho sugere que uma maior diferenciação entre alíquotas, dificulta a administração tarifária e pode levar a evasão.In this paper we measure the effect of tax rates on tax evasion using data on the trade flow between Brazil and the United States. Our results show that increases in the tax rates lead to higher evasion on two different ways: under invoicing and mislabeling higher taxed products as lower ones. These results corroborate the theoretical predictions of the Allingham (1972 model and contribute to the recent debate on the influence of tax rates on evasion. We also point out to the existence of nonlinearities in the relationship between tax rates and evasion by showing that higher rates raise the opportunity costs of paying taxes and thus encourage evasion. Finally, our results suggest that relatively high rates and a complex set of rules, especially for customs taxes, result in large potential rewards for taxpayers willing to bribe to cut their own tax burden and/or speed up customs clearance of

Monitoring student attendance, participation, and performance improvement: an instrument and forms.

Science.gov (United States)

Kosta, Joanne

2012-01-01

When students receive consistent and fair feedback about their behavior, program liability decreases. To help students to have a clearer understanding of minimum program standards and the consequences of substandard performance, the author developed attendance and participation monitoring and performance improvement instruments. The author discusses the tools that address absenteeism, tardiness, unprofessional, and unsafe clinical behaviors among students.

Analysis by X-Ray images of EVA waste incorporated in Portland Cement

International Nuclear Information System (INIS)

Marques, M.A.; Antunes, M.L.P.; Montagnoli, R.M.; Mancini, S.D.

2012-01-01

The EVA is a copolymer used by Brazilian shoes industries. This material is cut for the manufacture of insoles. This operation generates about 18% of waste. The EVA waste can be reused in incorporation in Portland cement to construction without structural purposes. The aim of this work is to show X-rays images to assessment the space distribution of the wastes in the cement and to evaluate the use of this methodology. Cylindrical specimens were produced according to ABNT - NBR 5738 standards. The volume relation of sand and cement was 3:1, 10% and 30% of waste was incorporated in cement specimens. X-Rays images were obtained of cylindrical specimens in front projection. The images showed that the distribution of the waste is homogeneous, consistent with what was intended in this type of incorporation, which can provide uniformity in test results of compressive strength. (author)

Standardization and improvement of safety for radioisotope equipped instruments

International Nuclear Information System (INIS)

Sumi, Tetsuo

1980-01-01

The safety for radioisotope-equipped instruments is considered. The one is the safety for the source assembly. The radioisotopes employed for radioisotope-equipped instruments are sealed sources which are used in the state of being contained in the enclosures. Many of the enclosures are provided with shutter mechanism for the purpose of emitting radiation only during the period required. If the possible troubles that might lead to the accidents are sampled out of the results of field operation of radiation instruments, and the safety measures for source enclosures are considered in connection with these troubles, it is no exaggeration to say that the safety for source enclosures has been maintained by preventing the critical accidents by the management of users and the cooperation of manufactures though there were the chance for investigating the safety in the common field and the establishment of JIS Z 4614 standard. Another consideration is concerned with the measures to improve the safety. No accident in the past never guarantees no accident in the future. Accumulation of experience is most effective for those measures, and the more experiences the better. It may be most effective that the manufacturers disclose their experiences each other from the wide outlook overcoming the barrier of trade secret. Fortunately, such consciousness has risen since a few years ago, and the investigation group is doing the works in the Japan Radioisotope Association. On the other hand, the reasonable revision of the radiation injury prevention law is desired. (Wakatsuki, Y.)

'Seal, kus oleme meie, on muuseum!' ; Eva ja Adele Helsingis / interv. Heie Treier

Index Scriptorium Estoniae

1998-01-01

Elavad skulptuurid Saksamaalt Eva ja Adele etendasid moodsa kunsti muuseumi Kiasma avamisel performance'it 'Seal, kus oleme meie, on muuseum'. Intervjuu kunstnikega. Kunstnikepaarist, nende eesmärgist, millistes maades võetakse neid kergemini vastu, Kiasmast jm

Evidências empirícas sobre a relação entre EVA e Retorno Acionário nas empresas brasileiras - Empirical evidence on the relationship beween EVA and Stock Returns in brazilian firms

Directory of Open Access Journals (Sweden)

Otavio Ribeiro de Medeiros

2009-05-01

Full Text Available Este artigo fornece evidências empíricas sobre a relação entre Valor Econômico Adicionado (EVA e retornos acionários de empresas brasileiras. A relação entre essas variáveis têm sido motivo de controvérsia nos últimos anos, com alguns autores encontrando associações significativas entre elas, enquanto outros não encontrando nenhuma. A hipótese de que o EVA afeta os retornos acionários é testada através de regressão linear, utilizando-se modelos alternativos. A amostra é composta de empresas negociadas na mais importante bolsa de valores brasileira. Uma comparação entre os resultados deste estudo com os de estudos anteriores mostram que resultados significativos dependem da determinação das variáveis apropriadas (retornos acionários versus preços das ações, bem como da correta relação dinâmica entre a variável dependente e a independente. This paper provides empirical evidence on the relationship between Economic Value Added (EVA and stock returns in Brazilian firms. This relationship between these variables has been subject to controversy in recent years, with some authors finding significant associations between them while others find none. The hypothesis that EVA affects stock returns is tested through linear regression, using alternative models. The sample is comprised of companies that are traded on the most important Brazilian stock exchange. A comparison of the outcomes of our study with those of previous studies shows that significant results depend on determination of the appropriate variables (stock returns versus stock prices, as well as of the correct dynamic structure between the dependent and the explanatory variable.

Farewell Jean-Marie Good Luck Eva Welcome back Franz

CERN Multimedia

2001-01-01

At the farewell reception offered by the Director-General, Professor Luciano Maiani, on the occasion of Jean-Marie Dufour's retirement from CERN, three generations of CERN Legal Counsel met. From right to left: Jean-Marie Dufour, who retires on 30 November 2001, after 35 years of service. Eva-Maria Gröniger-Voss, who takes over from Jean-Marie Dufour on 1st December 2001. Ambassador Franz Schmid, CERN Legal Counsel from 1971 to 1974.

Tänapäeva muinasjutt : [lühijutud] / Kris, Moor, pseud.

Index Scriptorium Estoniae

Kris Moor, pseud.

2007-01-01

Sisu: Imagine an actor saying following ; algus ; korralikud tüdrukud ; Provokatsioon ; absoluutselt täiuslik ; sigaret ; best friends ; probleem ; Tere Kris ; kirjutis ; armastus ; Elluastuja ; oeh ; klishee ; happy neverending story ; tungid ja tungisaatused ; noh ; lohe ; the art of noise ; latentsus ; Lühikokkuvõte tänapäeva muinasjutust: (ilma ilukirjandusliku liialduseta)

Keskkonnamiljardär pidas sünnipäeva / Toivo Räägel

Index Scriptorium Estoniae

Räägel, Toivo, 1956-

2005-01-01

Viiendat sünnipäeva tähistanud Keskkonnainvesteeringute Keskus (KIK) on oma tegutsemisaja jooksul investeerinud keskkonda 1,4 miljardit krooni ning vahendanud ühtekuuluvusfondi ISPA raha 575 miljonit krooni eest. Lisa: KIKi rahastatud projektid Raplamaal

Study of montmorillonite nanoparticles and electron beam irradiation interaction of ethylene vinyl acetate (EVA)/de-vulcanized waste rubber thermoplastic composites

Science.gov (United States)

Bee, Soo-Tueen; Sin, Lee Tin; Hoe, Tie Teck; Ratnam, C. T.; Bee, Soo Ling; Rahmat, A. R.

2018-05-01

The purpose of this work was to investigate the effects of montmorillonite (MMT) loading level and electron beam irradiation on the physical-mechanical properties and thermal stability of ethylene vinyl acetate (EVA)- devulcanised waste rubber blends. The addition of MMT particles has significantly increased the d-spacing and interchain separation of deflection peak (0 0 2) of MMT particles. This indicates that MMT particles have effectively intercalated in polymer matrix of EVA-devulcanised waste rubber blends. Besides, the application of electron beam irradiation dosages <150 kGy could also significantly induce the effective intercalation effect of MMT particles in polymer matrix by introducing crosslinking networks. The increasing of electron beam irradiation dosages up to 250 kGy has gradually increased the gel content of all EVA-devulcanized rubber blends by inducing the formation of crosslinking networks in polymer matrix. Also, the tensile strength of all EVA-devulcanized waste rubber blends was gradually increased when irradiated up to 150 kGy. This is due to the occurrence of crosslinking networks by irradiation could significantly provide reinforcement effect to polymer matrix by effectively transferring the stress applied on polymer matrix throughout the whole polymer matrix.

Quebra de dormência de gemas de macieira cv. Eva tratadas com cianamida hidrogenada

Directory of Open Access Journals (Sweden)

CRUZ JÚNIOR ÁLVARO DE OLIVEIRA

2002-01-01

Full Text Available A maioria das cultivares de macieiras plantadas no Brasil apresentam deficiência e desuniformidade de brotação, devido à má distribuição e/ou baixo número de horas de frio abaixo de 7,2masculine C, constituindo-se num entrave à produtividade. Mesmo utilizando-se de cultivares de baixa exigência de frio invernal, como a cultivar Eva, tem-se verificado a necessidade de se fazer a quebra de dormência para uniformizar a brotação, compatibilizar o florescimento e antecipar e melhorar a produção em regiões com invernos amenos ou anos de baixo acúmulo de frio. Avaliou-se o efeito da aplicação de cianamida hidrogenada em três diferentes concentrações (0,5; 1,0 e 1,5 % associada ao óleo mineral (3% na brotação de gemas laterais e terminais de macieiras da cv. Eva, e a fenologia das cvs. Eva e Anabela. Concluiu-se que a concentração de cianamida hidrogenada influi na percentagem de gemas laterais e terminais brotadas, sendo a concentração de 1,5% de cianamida hidrogenada associada a 3% de óleo mineral a mais efetiva na quebra da dormência das gemas

The MADD-3 LAMMER Kinase Interacts with a p38 MAP Kinase Pathway to Regulate the Display of the EVA-1 Guidance Receptor in Caenorhabditis elegans.

Directory of Open Access Journals (Sweden)

Serena A D'Souza

2016-04-01

Full Text Available The proper display of transmembrane receptors on the leading edge of migrating cells and cell extensions is essential for their response to guidance cues. We previously discovered that MADD-4, which is an ADAMTSL secreted by motor neurons in Caenorhabditis elegans, interacts with an UNC-40/EVA-1 co-receptor complex on muscles to attract plasma membrane extensions called muscle arms. In nematodes, the muscle arm termini harbor the post-synaptic elements of the neuromuscular junction. Through a forward genetic screen for mutants with disrupted muscle arm extension, we discovered that a LAMMER kinase, which we call MADD-3, is required for the proper display of the EVA-1 receptor on the muscle's plasma membrane. Without MADD-3, EVA-1 levels decrease concomitantly with a reduction of the late-endosomal marker RAB-7. Through a genetic suppressor screen, we found that the levels of EVA-1 and RAB-7 can be restored in madd-3 mutants by eliminating the function of a p38 MAP kinase pathway. We also found that EVA-1 and RAB-7 will accumulate in madd-3 mutants upon disrupting CUP-5, which is a mucolipin ortholog required for proper lysosome function. Together, our data suggests that the MADD-3 LAMMER kinase antagonizes the p38-mediated endosomal trafficking of EVA-1 to the lysosome. In this way, MADD-3 ensures that sufficient levels of EVA-1 are present to guide muscle arm extension towards the source of the MADD-4 guidance cue.

A Novel Approach to Highly Damage Tolerant and Abrasion Resistant EVA Gloves, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — As part of the spacesuit pressure garment, the EVA glove incorporates a silicone pad on the palm for protection of the bladder from cuts and punctures. Repeated...

The odontological identification of Eva Braun Hitler.

Science.gov (United States)

Keiser-Nielsen, S; Strøm, F

1983-01-01

On May 7th-9th, 1945, a team of Russian pathologists autopsied several bodies found in and near the Fuehrer Bunker in Berlin; among them, a female body (No. 13) was later identified as that of Eva Braun Hitler (EBH), mainly by means of a gold bridge from the lower right jaw. A postmortem photograph of this bridge also shows a separate gold filling. Data now available on the dental treatment of EBH have permitted the present authors to substantiate that this gold filling also came from the mouth of EBH. Further speculation about the fate of EBH would henceforth seem professionally unfounded.

Ei sinistele esmaspäevadele!!! / Piret Jamnes, Marju Unt, Mare Teichmann, Eva Palu

Index Scriptorium Estoniae

2010-01-01

Personaliotsingufirma Fontes partner ja konsultant Piret Jamnes, Estonian Euromanagement Institute'i direktor Marju Unt, kommunikatsioonibüroo JLS PR-konsultant Eva Palu ja TTÜ psühholoogiaprofessor Mare Teichmann ideedest, mis aitavad tööst rohkem rõõmu tunda

Fogging Control on LDPE/EVA Coextruded Films: Wettability Behavior and Its Correlation with Electric Performance

Directory of Open Access Journals (Sweden)

Miguel A. Waldo-Mendoza

2017-02-01

Full Text Available The transformation of fog at a non-visible water layer on a membrane of low-density polyethylene (LDPE and ethylene-vinyl acetate (EVA was evaluated. Nonionic surfactants of major demand in the polyolefin industry were studied. A kinetic study using a hot fog chamber showed that condensation is controlled by both the diffusion and permanency of the surfactant more than by the change of the surface energy developed by the wetting agents. The greatest permanency of the anti-fog effect of the LDPE/EVA surface was close to 3000 h. The contact angle results demonstrated the ability of the wetting agent to spread out to the surface. Complementarily, the migration of nonionic surfactants from the inside of the polymeric matrix to the surface was analyzed by Fourier transform infrared (FTIR microscopy. Additionally, electrical measurement on the anti-fogging membrane at alternating currents and at a sweep frequency was proposed to test the conductivity and wetting ability of nonionic surfactants. We proved that the amphiphilic molecules had the ability to increase the conductivity in the polyolefin membrane. A correlation between the bulk electrical conductivity and the permanency of the fogging control on the LDPE/EVA coextruded film was found.

Linn kui maastik / Eva Castro ; intervjueerinud Katrin Koov ; toimetanud Carl-Dag Lige

Index Scriptorium Estoniae

Castro, Eva

2011-01-01

Intervjuus Tallinna arhitektuuribiennaali ühe peaesineja Eva Castroga, kes on AB Groundlab arhitekt ja juhib Londoni Arhitektuuriühingu arhitektuurikoolis maastikuurbanismi magistriprogrammi, maastikuurbanismist ja selle õppekavast, Groundlabi projektide ja Londoni Arhitektuuriühingu arhitektuurikooli tudengite tööde näitusest Eesti Arhitektuurimuuseumis, visioonivõistlusest "Street 2020"

The relationship between sol fraction and radiation dose in radiation crosslinking of low-density polyethylene (LDPE)/ethylenevinylacetate copolymer (EVA) blend

International Nuclear Information System (INIS)

Zhang, W.X.; Liu, Y.T.; Sun, J.Z.

1990-01-01

In this paper, two different methods were used to prepare the blend of low-density polyethylene (LDPE) and ethylene vinyl acetate copolymer (EVA). One of them was mechanical blending, and the other was solution blending. The relationship between sol fraction and radiation dose of different weight ratio polymer blends has been studied. The method to calculate the β b value of polymer blend system (LDPE/EVA) has been established. (author)

Improvements in speech understanding with wireless binaural broadband digital hearing instruments in adults with sensorineural hearing loss.

Science.gov (United States)

Kreisman, Brian M; Mazevski, Annette G; Schum, Donald J; Sockalingam, Ravichandran

2010-03-01

This investigation examined whether speech intelligibility in noise can be improved using a new, binaural broadband hearing instrument system. Participants were 36 adults with symmetrical, sensorineural hearing loss (18 experienced hearing instrument users and 18 without prior experience). Participants were fit binaurally in a planned comparison, randomized crossover design study with binaural broadband hearing instruments and advanced digital hearing instruments. Following an adjustment period with each device, participants underwent two speech-in-noise tests: the QuickSIN and the Hearing in Noise Test (HINT). Results suggested significantly better performance on the QuickSIN and the HINT measures with the binaural broadband hearing instruments, when compared with the advanced digital hearing instruments and unaided, across and within all noise conditions.

Thermodynamical analysis of an ADAM/EVA-process for electricity generation

International Nuclear Information System (INIS)

Knoche, K.F.; Tsatsaronis, G.; Loehrer, F.

1982-01-01

In this article, the so-called ADAM/EVA-process for long-range heat transport is presented as an alternative method of electricity generation, as being interesting from the purely thermodynamic point of view. For various variants of this process, extensive mass and energy balances are calculated. With the help of exact energy balances, the irreversibilities of the individual parts of the plant are determined and evaluated by comparison. (orig.) [de

Apollo 16 lunar module 'Orion' photographed from distance during EVA

Science.gov (United States)

1972-01-01

The Apollo 16 Lunar Module 'Orion' is photographed from a distance by Astronaut Chares M. Duke Jr., lunar module pilot, aboard the moving Lunar Roving Vehicle. Astronauts Duke and John W. Young, commander, were returing from the third Apollo 16 extravehicular activity (EVA-2). The RCA color television camera mounted on the LRV is in the foreground. A portion of the LRV's high-gain antenna is at top left.

Effect of the High-Energy Electron Beam Irradiation on the Morphology and Mechanical Properties of PE/EVA Blends

International Nuclear Information System (INIS)

Razavi Aghjeh, M. K.

2006-01-01

The main objective of the present work was to study the effect of electron beam irradiation on the morphology and mechanical properties of PE/EVA blends. The melt compounding of the blends were carried out in an internal mixer. The small amount of the prepared blend samples were rapidly quenched in liquid nitrogen and the remained were compression molded into sheets. Sheets and quenched samples were then irradiated by a 10 MeV electron beam accelerator using different dose levels. The morphological studies for both, sheeted and quenched blends were performed on cryogenically fractured surfaces by using SEM technique. The mechanical properties of the sheeted samples were evaluated according to ASTM D638. The results of mechanical properties showed that, increasing in irradiation dose increases the tensile strength and decreases the elongation at break in all blend compositions. On the other hand, it was found that, for PE/EVA blends the extent of tensile strength increase, and elongation at break decrease, are more appreciable in compare to the neat PE and EVA. These results suggest that, the blend interface is more susceptible for irradiation induced crosslinking. This is because of more affinity of PE and EVA macroradicals to termination with together in compare to own macroradicals.The results of morphological studies showed that, irradiation can stabilize the blend morphology especially in co-continues regions, where the morphology is more unstable due to the heat coarsening

Functional assessment of allelic variants in the SLC26A4 gene involved in Pendred syndrome and nonsyndromic EVA

Science.gov (United States)

Pera, Alejandra; Dossena, Silvia; Rodighiero, Simona; Gandía, Marta; Bottà, Guido; Meyer, Giuliano; Moreno, Felipe; Nofziger, Charity; Hernández-Chico, Concepción; Paulmichl, Markus

2008-01-01

Pendred syndrome is an autosomal recessive disorder characterized by sensorineural hearing loss, with malformations of the inner ear, ranging from enlarged vestibular aqueduct (EVA) to Mondini malformation, and deficient iodide organification in the thyroid gland. Nonsyndromic EVA (ns-EVA) is a separate type of sensorineural hearing loss showing normal thyroid function. Both Pendred syndrome and ns-EVA seem to be linked to the malfunction of pendrin (SLC26A4), a membrane transporter able to exchange anions between the cytosol and extracellular fluid. In the past, the pathogenicity of SLC26A4 missense mutations were assumed if the mutations fulfilled two criteria: low incidence of the mutation in the control population and substitution of evolutionary conserved amino acids. Here we show that these criteria are insufficient to make meaningful predictions about the effect of these SLC26A4 variants on the pendrin-induced ion transport. Furthermore, we functionally characterized 10 missense mutations within the SLC26A4 ORF, and consistently found that on the protein level, an addition or omission of a proline or a charged amino acid in the SLC26A4 sequence is detrimental to its function. These types of changes may be adequate for predicting SLC26A4 functionality in the absence of direct functional tests. PMID:19017801

Improving the accuracy of total quality management instruments.

Science.gov (United States)

Bechtel, G A; Wood, D

1996-03-01

Total quality management (TQM) instruments are essential tools in defining concepts identified in an Ishikawa or ¿cause-and-effect¿ diagram. Collecting meaningful and accurate data using TQM instruments is imperative if productivity and quality of care are to be enhanced. This article provides managers with techniques and guidelines that will enhance the reliability and validity of TQM instruments, thereby promoting organization efficiency and customer satisfaction.

Modified atmosphere efficiency in the quality maintenance of Eva apples

Directory of Open Access Journals (Sweden)

Camila Argenta Fante

2014-06-01

Full Text Available Modified atmosphere is a method of food preservation that provides increased lifetime, decreases deterioration losses, and facilitates marketing. The objective of this study was to evaluate the efficiency of different plastic films in modifying the atmosphere around Eva apples to assure quality maintenance during postharvest storage. The fruits were cleaned and separated into three treatment groups: polypropylene, low density polyethylene, and high density polyethylene packing with a total of 5 fruits per package for each evaluation period. A group of control apples was not submitted to atmospheric modification. After the treatment, all fruits were stored at 0.5±0.5°C (cold storage for up to 225 days. The analyses were performed at 45, 135, and 225 days after cold storage. Respiration, ethylene production, firmness, mass loss, total pectin, soluble pectin, soluble solids, total acidity, and epidermis background color of each treatment group were evaluated. The high density polyethylene film treatment did not show a decrease in ethylene production during storage and allowed the fruits to maintain a greater firmness and smaller percentage of mass loss during the study period. Moreover, the storage of the Eva apple cultivar under modified atmosphere allowed the preservation of quality for up to seven months.

Mari sangari päeva sõnum / Jaak Prozes ; interv. Livia Viitol

Index Scriptorium Estoniae

Prozes, Jaak, 1965-

2006-01-01

Fenno-Ugria Hõimukeskuse juhataja ja Eestimaa Rahvaste Ühenduse juht soome-ugri rahvaste olukorrast Venemaal ja rahvusseltside tegevusest Eestis. Aprilli lõpul tähistasid marid oma rahvuspüha - mari sangari päeva. Pärimuse põhjal langes maride rahvuskangelane Boltu̧ võitluses oma rahva vabaduse eest 26. aprillil 1556

A Cabin Air Separator for EVA Oxygen

Science.gov (United States)

Graf, John C.

2011-01-01

Presently, the Extra-Vehicular Activities (EVAs) conducted from the Quest Joint Airlock on the International Space Station use high pressure, high purity oxygen that is delivered to the Space Station by the Space Shuttle. When the Space Shuttle retires, a new method of delivering high pressure, high purity oxygen to the High Pressure Gas Tanks (HPGTs) is needed. One method is to use a cabin air separator to sweep oxygen from the cabin air, generate a low pressure/high purity oxygen stream, and compress the oxygen with a multistage mechanical compressor. A main advantage to this type of system is that the existing low pressure oxygen supply infrastructure can be used as the source of cabin oxygen. ISS has two water electrolysis systems that deliver low pressure oxygen to the cabin, as well as chlorate candles and compressed gas tanks on cargo vehicles. Each of these systems can feed low pressure oxygen into the cabin, and any low pressure oxygen source can be used as an on-board source of oxygen. Three different oxygen separator systems were evaluated, and a two stage Pressure Swing Adsorption system was selected for reasons of technical maturity. Two different compressor designs were subjected to long term testing, and the compressor with better life performance and more favorable oxygen safety characteristics was selected. These technologies have been used as the basis of a design for a flight system located in Equipment Lock, and taken to Preliminary Design Review level of maturity. This paper describes the Cabin Air Separator for EVA Oxygen (CASEO) concept, describes the separator and compressor technology trades, highlights key technology risks, and describes the flight hardware concept as presented at Preliminary Design Review (PDR)

Improved instrumentation for blood flow velocity measurements in the microcirculation of small animals

International Nuclear Information System (INIS)

Mesquita, Jayme Alves Jr. de; Bouskela, Eliete; Wajnberg, Eliane; Lopes de Melo, Pedro

2007-01-01

Microcirculation is the generic name of vessels with internal diameter less than 100 μm of the circulatory system, whose main functions are tissue nutrition and oxygen supply. In microcirculatory studies, it is important to know the amount of oxyhemoglobin present in the blood and how fast it is moving. The present work describes improvements introduced in a classical hardware-based instrument that has usually been used to monitor blood flow velocity in the microcirculation of small animals. It consists of a virtual instrument that can be easily incorporated into existing hardware-based systems, contributing to reduce operator related biases and allowing digital processing and storage. The design and calibration of the modified instrument are described as well as in vitro and in vivo results obtained with electrical models and small animals, respectively. Results obtained in in vivo studies showed that this new system is able to detect a small reduction in blood flow velocity comparing arteries and arterioles (p<0.002) and a further reduction in capillaries (p<0.0001). A significant increase in velocity comparing capillaries and venules (p<0.001) and venules and veins (p<0.001) was also observed. These results are in close agreement with biophysical principles. Moreover, the improvements introduced in the device allowed us to clearly observe changes in blood flow introduced by a pharmacological intervention, suggesting that the system has enough temporal resolution to track these microcirculatory events. These results were also in close conformity to physiology, confirming the high scientific potential of the modified system and indicating that this instrument can also be useful for pharmacological evaluations

Muusajüngrid pühitsesid Kreutzwaldi 200. sünnipäeva / Toomas Pill

Index Scriptorium Estoniae

Pill, Toomas

2004-01-01

13. dets. 2003 Sydneys toimunud tähtpäevaüritusel esines Toomas Pill referaadiga "Kalevipoja" retseptsioonist, loeti ette katkendeid Kreutzwaldi ja Koidula kirjavahetusest ning deklameeriti Heidi Aedma poolt valitud katkendeid "Kalevipojast"

Kunagi nii popp idabloki kadunud filmikunst / Eva Näripea, Andreas Trossek ; intervjueerinud Ave Randviir

Index Scriptorium Estoniae

Näripea, Eva

2009-01-01

2007. a. oktoobris toimunud konverentsi "Via Transversa : Lost Cinema of the Former Eastern Bloc" ettekannetel põhinevast kogumikust: Via Transversa : Lost Cinema of the Former Eastern Bloc / editors Eva Näripea, Andreas Trossek. Tallinn : Eesti Kunstiakadeemia, 2008. (Koht ja paik ; 7)

Developing and testing an instrument to measure the presence of conditions for successful implementation of quality improvement collaboratives.

Science.gov (United States)

Dückers, Michel L A; Wagner, Cordula; Groenewegen, Peter P

2008-08-11

In quality improvement collaboratives (QICs) teams of practitioners from different health care organizations are brought together to systematically improve an aspect of patient care. Teams take part in a series of meetings to learn about relevant best practices, quality methods and change ideas, and share experiences in making changes in their own local setting. The purpose of this study was to develop an instrument for measuring team organization, external change agent support and support from the team's home institution in a Dutch national improvement and dissemination programme for hospitals based on several QICs. The exploratory methodological design included two phases: a) content development and assessment, resulting in an instrument with 15 items, and b) field testing (N = 165). Internal consistency reliability was tested via Cronbach's alpha coefficient. Principal component analyses were used to identify underlying constructs. Tests of scaling assumptions according to the multi trait/multi-item matrix, were used to confirm the component structure. Three components were revealed, explaining 65% of the variability. The components were labelled 'organizational support', 'team organization' and 'external change agent support'. One item not meeting item-scale criteria was removed. This resulted in a 14 item instrument. Scale reliability ranged from 0.77 to 0.91. Internal item consistency and divergent validity were satisfactory. On the whole, the instrument appears to be a promising tool for assessing team organization and internal and external support during QIC implementation. The psychometric properties were good and warrant application of the instrument for the evaluation of the national programme and similar improvement programmes.

Developing and testing an instrument to measure the presence of conditions for successful implementation of quality improvement collaboratives

Directory of Open Access Journals (Sweden)

Wagner Cordula

2008-08-01

Full Text Available Abstract Background In quality improvement collaboratives (QICs teams of practitioners from different health care organizations are brought together to systematically improve an aspect of patient care. Teams take part in a series of meetings to learn about relevant best practices, quality methods and change ideas, and share experiences in making changes in their own local setting. The purpose of this study was to develop an instrument for measuring team organization, external change agent support and support from the team's home institution in a Dutch national improvement and dissemination programme for hospitals based on several QICs. Methods The exploratory methodological design included two phases: a content development and assessment, resulting in an instrument with 15 items, and b field testing (N = 165. Internal consistency reliability was tested via Cronbach's alpha coefficient. Principal component analyses were used to identify underlying constructs. Tests of scaling assumptions according to the multi trait/multi-item matrix, were used to confirm the component structure. Results Three components were revealed, explaining 65% of the variability. The components were labelled 'organizational support', 'team organization' and 'external change agent support'. One item not meeting item-scale criteria was removed. This resulted in a 14 item instrument. Scale reliability ranged from 0.77 to 0.91. Internal item consistency and divergent validity were satisfactory. Conclusion On the whole, the instrument appears to be a promising tool for assessing team organization and internal and external support during QIC implementation. The psychometric properties were good and warrant application of the instrument for the evaluation of the national programme and similar improvement programmes.

Use of Traditional and Novel Methods to Evaluate the Influence of an EVA Glove on Hand Performance

Science.gov (United States)

Benson, Elizabeth A.; England, Scott A.; Mesloh, Miranda; Thompson, Shelby; ajulu, Sudhakar

2010-01-01

The gloved hand is one of an astronaut s primary means of interacting with the environment, and any restrictions imposed by the glove can strongly affect performance during extravehicular activity (EVA). Glove restrictions have been the subject of study for decades, yet previous studies have generally been unsuccessful in quantifying glove mobility and tactility. Past studies have tended to focus on the dexterity, strength, and functional performance of the gloved hand; this provides only a circumspect analysis of the impact of each type of restriction on the glove s overall capability. The aim of this study was to develop novel capabilities to provide metrics for mobility and tactility that can be used to assess the performance of a glove in a way that could enable designers and engineers to improve their current designs. A series of evaluations were performed to compare unpressurized and pressurized (4.3 psi) gloved conditions with the ungloved condition. A second series of evaluations were performed with the Thermal Micrometeoroid Garment (TMG) removed. This series of tests provided interesting insight into how much of an effect the TMG has on gloved mobility - in some cases, the presence of the TMG restricted glove mobility as much as pressurization did. Previous hypotheses had assumed that the TMG would have a much lower impact on mobility, but these results suggest that an improvement in the design of the TMG could have a significant impact on glove performance. Tactility testing illustrated the effect of glove pressurization, provided insight into the design of hardware that interfaces with the glove, and highlighted areas of concern. The metrics developed in this study served to benchmark the Phase VI EVA glove and to develop requirements for the next-generation glove for the Constellation program.

25. juulil toimuvad kodukoha suurmehe Jakob Hurda 170. sünniaastapäeva pidustused

Index Scriptorium Estoniae

Vill, Sirje

2009-01-01

Jakob Hurda 170. sünniaastapäeva tähistatakse traditsioonilise kultuuriretkega Jakob Hurdaga seotud paikadesse, autasustatakse õpilaste uurimustööde võitjaid ja teemaüritusel "Jakob Hurt 170" Põlva Kultuuri- ja Huvikeskuses antakse üle laureaatidele Hurda-nimelised kultuuriauhinnad

The Use of Human Modeling of EVA Tasks as a Systems Engineering Tool

Science.gov (United States)

Dischinger, H. Charles, Jr.; Schmidt, Henry J.; Kross, Dennis A. (Technical Monitor)

2001-01-01

Computer-generated human models have been used in aerospace design for a decade. They have come to be highly reliable for worksite analysis of certain types of EVA tasks. In many design environments, this analysis comes after the structural design is largely complete. However, the use of these models as a development tool is gaining acceptance within organizations that practice good systems engineering processes. The design of the United States Propulsion Module for the International Space Station provides an example of this application. The Propulsion Module will provide augmentation to the propulsion capability supplied by the Russian Service Module Zvezda. It is a late addition to the set of modules provided by the United States to the ISS Program, and as a result, faces design challenges that result from the level of immaturity of its integration into the Station. Among these are heat dissipation and physical envelopes. Since the rest of the Station was designed to maximize the use of the cooling system, little margin is available for the addition of another module. The Propulsion Module will attach at the forward end of the Station, and will be between the Orbiter and the rest of ISS. Since cargo must be removed from the Payload Bay and transferred to Station by the Canadarm, there is a potential for protrusions from the module, such as thruster booms, to interfere with robotic operations. These and similar engineering issues must be addressed as part of the development. In the implementation of good system design, all design solutions should be analyzed for compatibility with all affected subsystems. Human modeling has been used in this project to provide rapid input to system trades of design concepts. For example, the placement of radiators and avionics components for optimization of heat dissipation had to be examined for feasibility of EVA translation paths and worksite development. Likewise, the location of and mechanism for the retraction of thruster

Eva Giberti: trayectoria institucional, científica y cívica

OpenAIRE

Giberti, Eva; Escardó, Vita; Invernizzi, Hernán; Maffia, Diana; Maldavsky, David

2006-01-01

Abstract: In spite of the diversity of perspectives approached by the authors, this text –which presents the institutional, scientific, and civic trajectory of Eva Giberti– highlights her landmarks and facets: her academic activity, her trajectory integrating different responsibilities, her clinical labor, her civic participation, her contributions in the mass media (where she was the pioneer in the spreading of psychoanalysis), and her publications (among them, the ones about the demystific...

The Baltic States and Moscow's 9 May Commemoration : Analysing Memory Politics in Europe / Eva-Clarita Onken

Index Scriptorium Estoniae

Onken, Eva-Clarita

2007-01-01

Mälu roll kaasaegse Euroopa poliitikas, selle mõju riikidevahelistele kahepoolsetele suhetele ja Euroopa Liidu poliitikale seoses 2005. aasta 9. mail Moskvas toimunud Teise maailmasõja 60. aastapäeva pidustustega

Community Arctio-Artemisetum vulgaris (Tx. 1942 Oberd. et al. 1967.: the Most Widespread Ruderal Community at Pančevački rit

Directory of Open Access Journals (Sweden)

Radmila Stanković-Kalezić

2009-01-01

Full Text Available A several-year investigation of distribution, phytocoenological differentiation, floristic composition and structure of the ruderal flora and vegetation, and relative anthropogenic influences was conducted in the area of Pančevački rit.The study focused on the ruderal community Arctio-Artemisetum vulgaris, the most widespread of 10 ruderal communities identified in a detailed phytocoenological analysis of the location of Pančevački rit.

Hiina tänapäeva arhitektuur - karmiilmeline, aga põnev / Zhang Ke, Zhang Hong, Xiaodu Liu ; interv. Hanna Läkk ja Ene Läkk

Index Scriptorium Estoniae

Zhang Ke

2006-01-01

Intervjuu Hiina arhitektuuribüroo Standardarchitecture arhitektide Zhang Ke ja Zhang Hongiga ning arhitektuuribüroo Urbanus arhitekti Xiaodu Liuga Hollandis Hiina tänapäeva tutvustaval näitusel. Hiina arhitektide haridusest, oma arhitektuuribüroode töödest, tänapäeva hiina arhitektuurist, põhiprobleemidest

STS-61B Astronaut Spring During EASE Extravehicular Activity (EVA)

Science.gov (United States)

1985-01-01

The crew assigned to the STS-61B mission included Bryan D. O'Conner, pilot; Brewster H. Shaw, commander; Charles D. Walker, payload specialist; mission specialists Jerry L. Ross, Mary L. Cleave, and Sherwood C. Spring; and Rodolpho Neri Vela, payload specialist. Launched aboard the Space Shuttle Atlantis November 28, 1985 at 7:29:00 pm (EST), the STS-61B mission's primary payload included three communications satellites: MORELOS-B (Mexico); AUSSAT-2 (Australia); and SATCOM KU-2 (RCA Americom). Two experiments were conducted to test assembling erectable structures in space: EASE (Experimental Assembly of Structures in Extravehicular Activity), and ACCESS (Assembly Concept for Construction of Erectable Space Structure). In a joint venture between NASA/Langley Research Center in Hampton, Virginia, and the Marshall Space Flight Center (MSFC), the EASE and ACCESS were developed and demonstrated at MSFC's Neutral Buoyancy Simulator (NBS). In this STS-61B onboard photo, astronaut Spring was working on the EASE during an Extravehicular Activity (EVA). The primary objective of this experiment was to test the structural assembly concepts for suitability as the framework for larger space structures and to identify ways to improve the productivity of space construction.

Nende kõrgeaususte kirjad on avaldatud : [intervjuu] / Eva Aaver, Heli Laanekask ; üles kirjut. Juhani Püttsepp

Index Scriptorium Estoniae

Aaver, Eva, 1925-2008

1998-01-01

Riigi teaduspreemia humanitaarteaduste vallas said Eva Aaver, Heli Laanekask, Abel Nagelmaa ja Leo Anvelt (postuumselt) publikatsiooni 'Otto Wilhelm Masingu kirjad Johann Heinrich Rosenplänterile. 1814-1832'

Shift of Enterovirus species among children in Cameroon--identification of a new enterovirus, EV-A119.

Science.gov (United States)

Ayukekbong, James; Kabayiza, Jean-Claude; Lindh, Magnus; Nkuo-Akenji, Theresia; Tah, Ferdinand; Bergström, Tomas; Norder, Helene

2013-09-01

Infections caused by human enteroviruses (EVs) are often asymptomatic or mild, although they may cause more severe illnesses as meningitis and acute flaccid paralysis. EVs have globally posed a threat to children, and outbreaks of aseptic meningitis and hand, foot and mouth disease are frequently reported. To identify EV strains circulating among healthy children in a small community in Limbe, Cameroon two years apart. Species and EV types were obtained by partial 5'UTR-VP4 and VP1 sequencing of RNA from stool samples collected in October 2009 and September 2011 from 150 children in Cameroon. In all, 74 children (49%) were infected with 28 different types of EV. There were 29 (54%) infected children in 2009, and 45 (47%) in 2011. There was a significant difference between detected species of EV, with 15 (47%) children infected with EV-A in 2009, and 22 (71%) with EV-B in 2011 (p=0.0001). In 2009, one child was infected by a divergent EV, which was most similar to EV-A90. Based on the complete VP1 sequence, it was shown to be a new EV designated EV-A119. The current study shows a high heterogeneity of circulating EV types among children in Limbe, Cameroon, and a previously not described shift in predominating EV species. Copyright © 2013 Elsevier B.V. All rights reserved.

Kuidas tähistame TÜ 375. aastapäeva? / Varje Sootak

Index Scriptorium Estoniae

Sootak, Varje, 1946-

2007-01-01

TÜ 375. aastapäeva tähistamise ürituste seas ka kontserdid: 5. okt. Vanemuise kontserdimajas "Kuningas Gustavi gala" (esinevad ülikoori esinduskoorid koos Vanemuise Sümfooniaorkestriga ja Viljandi Kultuuriakadeemia kultuurikollektiivid, sh. muusikud), 6. okt. AthenasTRÜ ansamblid Rajacas, Rentaablus, Meedium ja Fix, 3. sept. Raekoja platsil uue kooliaasta alguse kontsert, 5. okt. üliõpilasmajas heategevuskontsert, sept. lõpus esitavad ülikoolide koorid Tallinnas ja Pärnus Carl Orffi lavakantaadi "Carmina BUrana"

Microwave irradiation induced modifications on the interfaces in SAN/EVA/PVC and PVAc/BPA/PVP ternary polymer blends: Positron lifetime study

International Nuclear Information System (INIS)

Dinesh, Meghala; Chikkakuntappa, Ranganathaiah

2013-01-01

Ternary polymer blends of poly(styrene-co-acrylonitrile)/poly(ethylene-co-vinylacetate)/poly(vinyl chloride) (SAN/EVA/PVC) and poly(vinyl acetate)/bisphenol A/polyvinylpyrrolidone (PVAc/BPA/PVP) with different compositions have been prepared by solvent casting method and characterized by positron lifetime spectroscopy and differential scanning calorimetry DSC. Phase modifications have been induced by irradiating the blends with microwave radiation. These changes have been monitored by measuring the free-volume content in the blends. The results clearly show improved interactions between the constituent polymers of the blends upon microwave irradiation. However, the free-volume data and DSC measurements are found to be inadequate to reveal the changes at the interfaces and the interfaces determine the final properties of the blend. For this we have used hydrodynamic interaction (α ij ) approach developed by us to measure strength of hydrodynamic interaction at the interfaces. These results show that microwave irradiation stabilizes the interfaces if the blend contains strong polar groups. SAN/EVA/PVC blend shows an increased effective hydrodynamic interaction from −3.18 to −4.85 at composition 50/35/15 upon microwave irradiation and PVAc/BPA/PVP blend shows an increased effective hydrodynamic interaction from −3.81 to −7.57 at composition 20/50/30 after irradiation

Microwave irradiation induced modifications on the interfaces in SAN/EVA/PVC and PVAc/BPA/PVP ternary polymer blends: Positron lifetime study

Energy Technology Data Exchange (ETDEWEB)

Dinesh, Meghala; Chikkakuntappa, Ranganathaiah, E-mail: crang1@rediffmail.com

2013-09-01

Ternary polymer blends of poly(styrene-co-acrylonitrile)/poly(ethylene-co-vinylacetate)/poly(vinyl chloride) (SAN/EVA/PVC) and poly(vinyl acetate)/bisphenol A/polyvinylpyrrolidone (PVAc/BPA/PVP) with different compositions have been prepared by solvent casting method and characterized by positron lifetime spectroscopy and differential scanning calorimetry DSC. Phase modifications have been induced by irradiating the blends with microwave radiation. These changes have been monitored by measuring the free-volume content in the blends. The results clearly show improved interactions between the constituent polymers of the blends upon microwave irradiation. However, the free-volume data and DSC measurements are found to be inadequate to reveal the changes at the interfaces and the interfaces determine the final properties of the blend. For this we have used hydrodynamic interaction (α{sub ij}) approach developed by us to measure strength of hydrodynamic interaction at the interfaces. These results show that microwave irradiation stabilizes the interfaces if the blend contains strong polar groups. SAN/EVA/PVC blend shows an increased effective hydrodynamic interaction from −3.18 to −4.85 at composition 50/35/15 upon microwave irradiation and PVAc/BPA/PVP blend shows an increased effective hydrodynamic interaction from −3.81 to −7.57 at composition 20/50/30 after irradiation.

Improved mirror coatings for use in the Lyman Ultraviolet to enhance astronomical instrument capabilities

Science.gov (United States)

Quijada, Manuel A.; del Hoyo, Javier; Boris, David R.; Walton, Scott G.

2017-09-01

This paper will describe efforts at developing broadband mirror coatings with high performance that will extend from infrared wavelengths down to the Far-Ultraviolet (FUV) spectral region. These mirror coatings would be realized by passivating the surface of freshly made aluminum coatings with fluorine ions in order to form a thin AlF3 overcoat that will protect the aluminum from oxidation and, hence, realize the high-reflectance of this material down to its intrinsic cut-off wavelength of 90 nm. Improved reflective coatings for optics, particularly in the FUV region (90-120 nm), could yield dramatically more sensitive instruments and permit more instrument design freedom.

Mobile colposcopy in urban and underserved suburban areas in Baja California

Science.gov (United States)

Madiedo, Marta; Contreras, Sonia; Villalobos, Octavio; Kahn, Bruce S.; Safir, Amit; Levitz, David

2016-03-01

Cervical cancer is the leading cause of cancer death for women in low resource settings, often affecting the most economically disenfranchised segment of the population. The key challenge with cervical cancer is the lack of an effective screening program for many of the at-risk, difficult-to-reach women. Outreach programs that utilize mobile clinics to increase access to screening and care in Baja California have been developed. However, many barriers such as quality assurance, efficient referral remained a challenge in this region. Visualization-based co-tests together with cytology (Pap smears) as a primary screen have been proposed. Here, the mobile colposcope of the enhanced visual assessment (EVA) is used to capture an image immediately following a Pap smear. EVA images were reviewed by expert colposcopists. Initial or preliminary data from pilot services showed that Pap false positives and Pap false negatives maybe reduced by expert review of EVA images. This suggests that reviewing of EVA images may be instrumental in catching inaccurate Pap results, thereby improving care. Thus, there is a need to further explore the benefits of using EVA as additional information when conducting Pap smear screenings.

EV-A71 vaccine licensure: a first step for multivalent enterovirus vaccine to control HFMD and other severe diseases.

Science.gov (United States)

Mao, Qunying; Wang, Yiping; Bian, Lianlian; Xu, Miao; Liang, Zhenglun

2016-07-20

Enteroviruses (EVs) are the most common viral agents in humans. Although most infections are mild or asymptomatic, there is a wide spectrum of clinical manifestations that may be caused by EV infections with varying degrees of severity. Among these viruses, EV-A71 and coxsackievirus (CV) CV-A16 from group A EVs attract the most attention because they are responsible for hand, foot and mouth disease (HFMD). Other EV-A viruses such as CV-A6 and CV-A10 were also reported to cause HFMD outbreaks in several countries or regions. Group B EVs such as CV-B3, CV-B5 and echovirus 30 were reported to be the main pathogens responsible for myocarditis and encephalitis epidemics and were also detected in HFMD patients. Vaccines are the best tools to control infectious diseases. In December 2015, China's Food and Drug Administration approved two inactivated EV-A71 vaccines for preventing severe HFMD.The CV-A16 vaccine and the EV-A71-CV-A16 bivalent vaccine showed substantial efficacy against HFMD in pre-clinical animal models. Previously, research on EV-B group vaccines was mainly focused on CV-B3 vaccine development. Because the HFMD pathogen spectrum has changed, and the threat from EV-B virus-associated severe diseases has gradually increased, it is necessary to develop multivalent HFMD vaccines. This study summarizes the clinical symptoms of diseases caused by EVs, such as HFMD, myocarditis and encephalitis, and the related EV vaccine development progress. In conclusion, developing multivalent EV vaccines should be strongly recommended to prevent HFMD, myocarditis, encephalitis and other severe diseases.

USE OF THE INSTRUMENTS OF SALES IMPROVEMENT IN THE NEIGHBOURHOOD STORES

Directory of Open Access Journals (Sweden)

Sandra Mrvica MAĐARAC

2017-05-01

Full Text Available The retail market in the Republic of Croatia has considerably changed during several last years by entering of large European hypermarkets and by opening a great number of shopping centres. This particularly affected the business of small independent retailers that are due to price uncompetitiveness difficult to cope with competition from hypermarkets. Sales success depends itself on the success of marketing program of a company. Improving sales brings a whole range of benefits to both producers and consumers and consists of a set of different incentives that are mainly short-term, designed to encourage faster and greater purchasing of certain products or services. Through well thought entrepreneurial approach and the use of methods for improving sales, neighbourhood stores could contribute through their business strategy to their competitiveness. Gaining customer loyalty, creating a personal relationship with customers, rewarding of loyal customers, promoting new products, helping the buyer in purchasing are some of the ways of improving neighbourhood store sales. The paper presents research results to which extent neighborhood stores in Osijek-Baranya County use instruments of sales improvement in order to enhance their sales and relationship with customers.

Clay intercalation and influence on crystallinity of EVA-based clay nanocomposites

International Nuclear Information System (INIS)

Chaudhary, D.S.; Prasad, R.; Gupta, R.K.; Bhattacharya, S.N.

2005-01-01

Various polymer clay nanocomposites (PCNs) were prepared from ethylene vinyl acetate copolymer (EVA) with 9, 18 and 28% vinyl acetate (VA) content filled with different wt.% (2.5, 5 and 7.5) of a Montmorillonite-based organo-modified clay (Cloisite[reg] C15A and C30B). The PCNs were prepared using melt blending techniques. Morphological information regarding intercalation and exfoliation were determined by using wide-angle X-ray scattering (WAXS) and transmission electron microscopy (TEM). WAXS and TEM confirmed that increasing the VA content was necessary to achieve greater clay-polymer interaction as seen from the comparatively higher intercalation of clay platelets with 28% VA. The effect of addition of clay on the development and the modification of crystalline morphology in EVA matrix was also studied using WAXS and temperature-modulated differential scanning calorimetry (MDSC). Results are presented showing that the addition of clay platelets does not increase the matrix crystallinity but the morphology was significantly modified such that there was an increase in the 'rigid' amorphous phase. Mechanical properties were also evaluated against the respective morphological information for each specimen and there are indications that the level of clay-polymer interaction plays a significant role in such morphological modification, and in such a way that affects the final PCN mechanical properties which has wide and significant applications in the packaging industries

View of the Lunar Module 'Orion' and Lunar Roving Vehicle during first EVA

Science.gov (United States)

1972-01-01

A view of the Lunar Module (LM) 'Orion' and Lunar Roving Vehicle (LRV), as photographed by Astronaut Charles M. Duke Jr., lunar module pilot, during the first Apollo 16 extravehicular activity (EVA-1) at the Descates landing site. Astronaut John W. Young, commander, can be seen directly behind the LRV. The lunar surface feature in the left background is Stone Mountain.

Pühapäeva hommik : [luuletused] / Wallace Stevens ; tõlk. Hasso Krull, Märt Väljataga

Index Scriptorium Estoniae

Stevens, Wallace

2008-01-01

Sisu: Pühapäeva hommik ; Peter Quince klahvide ees ; Mozart, 1935 ; Postkaart vulkaanist ; Moodsast luulest ; Paks punane mees loeb ette ; Seesmise armukese viimane üksikõne ; Ühe üksikasja kulg. Elu- ja loomeloolisi andmeid autori kohta lk. 531-532

Lunar EVA Dosimetry: Microdosimeter-Dosimeter Instrument

Data.gov (United States)

National Aeronautics and Space Administration — The overall objective of this research project is to design, develop, and test an engineering model solid-state microdosimeter (SSMD) by December 2012 suitable for...

Pidupäevaüritused olid Eestile ilus kingitus / Andris Tammela, Eno-Gerrit Link

Index Scriptorium Estoniae

Tammela, Andris

2008-01-01

Ülevaade EV 90. aastapäeva juubeliüritusest Pärnus. Vt. samas: Vabariigi juubel värvis Pärnu sinimustvalgeks; Head emotsioonid Eesti aastapäevalt: Are vallavanem Jaanus Männik, Euroopa Parlamendi liige Marianne Mikko, Pärnu linnavolikogu liikmed Valter Parve ja Raul Sarandi ja Pärnu maavanem Toomas Kivimägi

Eesti Draamateater tähistas maja 100. sünnipäeva / Tiiu Laks

Index Scriptorium Estoniae

Laks, Tiiu, 1984-

2010-01-01

18. septembril tähistati avatud uste päevaga Eesti Draamateater hoone 100. sünnipäeva. Õhtul sai teatrihoone fassaadilt vaadata Taavet Janseni, Taavi Varmi ja Andres Tenusaare videoinstallatsiooni. Esitleti raamatut "Eesti Draamateatri maja 100" (autorid Karin Hallas-Murula, Kristel Pappel, Haldja Jalajas). Avati Peeter Lauritsa fotonäitus "Pahempidi"

Preparation of the PET/PP/PE/EVA polymeric blend from PET bottles and modification studies induced by ionizing radiation; Obtencao da blenda polimerica PET/PP/PE/EVA a partir de garrafas PET e estudo das modificacoes provocadas pela radiacao ionizante

Energy Technology Data Exchange (ETDEWEB)

Rossini, Edvaldo Luis

2005-07-01

The environmental pollution is one of the biggest problems nowadays. Amidst the pollutants, plastic and especially the packings type {sup P}ET bottles{sup ,} which comprise of poly(ethylene terephthalate) (PET), polypropylene (PP), polyethylene (PE) and poly[ethylene-co-(vinyl acetate)] (EVA) are causing big damage in the environment. In this work, the polymeric blend PET/PP/PE/EVA was obtained by a process of simplified mechanical recycling from 'PET bottles' after consumption, with the objective to find solution to this environmental problem. It was also studied the different ionizing radiation doses effects (25, 50, 75, 100, 150, 200, 300, 400 e 500 kGy) on the blend properties using an electron beam accelerator. The mechanical (tensile strength, impact and hardness), thermal (Vicat softening temperature, differential scanning calorimetry and termogravimetric) and microscopic (light microscopy and scanning electron microscopy) properties of the blend were studied. The analysis of the results showed to be a not mixing and compatible blend, with mechanical and thermal properties (which appeared to be similar to the properties of the component material used in the blend in separate) satisfactory, resulting in a resistant material and of low cost, being able to be used in the production of parts that do not demand specifications techniques. The use of the ionizing radiation improved some of the mechanical and thermal properties of the blend (these modifications had been random and irregular, depending directly on the dose of applied radiation and the type of property) making possible more specific applications for this material. (author)

Kodutus Eestis - kas indiviidi või ühiskonna probleem? / Jüri Kõre, Riina Kiik, Eva Kõiv

Index Scriptorium Estoniae

Kõre, Jüri, 1953-

2005-01-01

Kodutuse ajaloolisest taustast ja põhjustest. Tartu linna kodutute hulgas 2003.-2004. a. tehtud uurimusest ning Eva Kõivu magistritööst "Kodutus Tartu linnas: Põhjused ja võimalikud lahendused". Diagrammid: Tartu koduta inimeste jaotus kodutuse kestuse järgi; Intervjueeritute sissetulekuallikad

Instrumentation requirements for the ESF thermomechanical experiments

International Nuclear Information System (INIS)

Pott, J.; Brechtel, C.E.

1992-01-01

In situ thermomechanical experiments are planned as part of the Yucca Mountain Site Characterization Project that require instruments to measure stress and displacement at temperatures that exceed the typical specifications of existing geotechnical instruments. A high degree of instrument reliability will also be required to satisfy the objectives of the experiments, therefore a study was undertaken to identify areas where improvement in instrument performance was required. A preliminary list of instruments required for the experiments was developed, based on existing test planning and analysis. Projected temperature requirements were compared to specifications of existing instruments to identify instrumentation development needs. Different instrument technologies, not currently employed in geotechnical instrumentation, were reviewed to identify potential improvements of existing designs for the high temperature environment. Technologies with strong potentials to improve instrument performance with relatively high reliability include graphite fiber composite materials, fiber optics, and video imagery

Cement blocks with EVA waste for extensive modular green roof: contribution of the components for thermal insulation

Directory of Open Access Journals (Sweden)

A. B. DE MELO

Full Text Available Abstract Green roofs can contribute in many ways to the quality of the environment, being known for reducing the heat transfer to the interior of the buildings. Amongst the available techniques for the execution of this type of covering, the use of light cement blocks which are compatible with the system of extensive modular green roofs is proposed. For the light cement blocks, produced with EVA aggregates (waste from the footwear industry, an additional contribution in the capacity of thermal insulation of the proposed green roof is expected. In the present article, the demonstration of such contribution is intended through measurements carried out in prototypes in hot and humid climates. After characterizing the capacity of thermal insulation of the proposed green roof, with different types of conventional covering as a reference, an additional contribution of the component used in this green roof was identified by making comparisons with measurements collected from another green roof, executed with cement blocks without the presence of the EVA aggregates. In the experiments, external and internal surface temperatures were measured in each of the prototypes' coverings, as well as the air temperatures in the internal and external environments. From the analysis of the data for a typical summer day, it was possible to prove that the proposed green roof presented the lowest temperature ranges, considering the internal air and surface temperatures. The presence of the EVA aggregates in the proposed blocks contributed to the decrease of the internal temperatures.

Determination of the linear coefficient of thermal expansion in polymer films at the nanoscale: influence of the composition of EVA copolymers and the molecular weight of PMMA.

Science.gov (United States)

González-Benito, J; Castillo, E; Cruz-Caldito, J F

2015-07-28

Nanothermal-expansion of poly(ethylene-co-vinylacetate), EVA, and poly(methyl methacrylate), PMMA, in the form of films was measured to finally obtain linear coefficients of thermal expansion, CTEs. The simple deflection of a cantilever in an atomic force microscope, AFM, was used to monitor thermal expansions at the nanoscale. The influences of: (a) the structure of EVA in terms of its composition (vinylacetate content) and (b) the size of PMMA chains in terms of the molecular weight were studied. To carry out this, several polymer samples were used, EVA copolymers with different weight percents of the vinylacetate comonomer (12, 18, 25 and 40%) and PMMA polymers with different weight average molecular weights (33.9, 64.8, 75.600 and 360.0 kg mol(-1)). The dependencies of the vinyl acetate weight fraction of EVA and the molecular weight of PMMA on their corresponding CTEs were analyzed to finally explain them using new, intuitive and very simple models based on the rule of mixtures. In the case of EVA copolymers a simple equation considering the weighted contributions of each comonomer was enough to estimate the final CTE above the glass transition temperature. On the other hand, when the molecular weight dependence is considered the free volume concept was used as novelty. The expansion of PMMA, at least at the nanoscale, was well and easily described by the sum of the weighted contributions of the occupied and free volumes, respectively.

Homogeneity characterization of ethylene-co-vinyl acetate copolymer (EVA) and hydrophobic silica nanocomposite by low field NMR

International Nuclear Information System (INIS)

Stael, Giovanni Chaves; Tavares, Maria I.B.

2005-01-01

This project proposes the characterization of a polymeric matrix composite material using nanometric scale hydrophobic silica as charge element, with the ethylene-vinyl acetate (EVA), by using the spin-lattice relaxation time measurement applying the low field NMR

Physicochemical and enzimatic transformations of "eva" apples stored under modified atmosphere

Directory of Open Access Journals (Sweden)

Ariela Betsy Thomas

2014-08-01

Full Text Available The need for a permanent market supply of fresh fruit has generated great interest in postharvest techniques that can promote useful life and quality of the fruit. The aim of this study was to evaluate the efficiency of atmospheric modification using different polymeric films in maintaining postharvest quality and prolonging the shelf life of Eva (Mallus sp apples. For this, fruits from the city of Barbacena - MG, selected and sanitized were packed in plastic trays and wrapped in the corresponding films. The films used were: polypropylene - 20 µm, low-density polyethylene - 14 µm and high-density polyethylene - 7 µm. Another group of fruits (control was not submitted to a modified atmosphere. Subsequently, all the the packages were stored under refrigeration (0 ° C ± 0.5 for 210 days and the evaluations of the following variables were performed every 30 days of storage: hydrogen potential (pH, titratable acidity, soluble solids, weight loss, firmness, total pectin, soluble pectin, pectin methyl esterase and polygalacturonase. The work was conducted in a completely randomized design (4x8, with 4 treatments and 8 experimental times. Each treatment consisted of three replicates and each experimental unit consisted of six fruits. The results were submitted to variance analysis and means were compared by the Tukey test at 5% probability and regression analysis. The low density polyethylene (14 µm packaging provided the best conservation of the Eva cultivar apple textural characteristics.

Homogeneity characterization of ethylene-co-vinyl acetate copolymer (EVA) and hydrophobic silica nanocomposite by low field NMR; Caracterizacao da homogeneidade de nanocomposito do copolimero etileno acetato de vinila (EVA) e silica hidrofobica atraves de ressonancia magnetica nuclear de baixo campo

Energy Technology Data Exchange (ETDEWEB)

Stael, Giovanni Chaves [Observatorio Nacional, Rio de Janeiro, RJ (Brazil). Dept. de Geofisica (DGE); Tavares, Maria I.B. [Universidade Federal do Rio de Janeiro, RJ (Brazil). Inst. de Macromoleculas

2005-07-01

This project proposes the characterization of a polymeric matrix composite material using nanometric scale hydrophobic silica as charge element, with the ethylene-vinyl acetate (EVA), by using the spin-lattice relaxation time measurement applying the low field NMR.

Low Power, Small Form Factor, High Performance EVA Radio Employing Micromachined Contour Mode Piezoelectric Resonators and Filters, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — In Phase I Harmonic Devices proposes to investigate the feasibility of a low-power, low-volume, lightweight, frequency agile, and fault tolerant EVA radio based on...

Transcatheter Embolisation of Proximal Type 1 Endoleaks Following Endovascular Aneurysm Sealing (EVAS) Using the Nellix Device: Technique and Outcomes

Energy Technology Data Exchange (ETDEWEB)

Ameli-Renani, S., E-mail: seyedameli@doctors.org.uk; Morgan, R. A., E-mail: Robert.morgan@stgeorges.nhs.uk [St George’s Hospital, Department of Radiology (United Kingdom)

2015-10-15

AimTo evaluate the technical success and mid-term outcomes following transcatheter embolisation of type 1a endoleak after Nellix endovascular aneurysm sealing (EVAS).Materials and MethodsSeven patients (5 men; mean age 83; range 79–90) underwent transcatheter embolisation between July 2013 and August 2014. The average time from EVAS to embolisation was 136 days (range 6–301) and from endoleak diagnosis to embolisation was 20 days (range 2–50). Embolisation was performed with coils and Onyx in six cases and Onyx only in one case. Technical success, imaging and clinical outcomes of embolisation were reviewed. Technical success was defined as elimination of the endoleak on completion angiography and first imaging follow-up. Clinical success was defined as unchanged or decreased aneurysm sac size on subsequent follow-up (average 8 months; range 103–471 days).ResultsAll cases were technically successful. One patient required a second endovascular procedure following Onyx reflux into the Nellix endograft and another patient required surgical closure of a brachial puncture site. All patients are endoleak free with stable sac size on the latest available follow-up imaging.ConclusionIf a type 1 endoleak occurs after EVAS, embolisation using Onyx with or without coils is feasible and effective with high technical success and freedom from endoleak recurrence at mid-term follow-up.

Transcatheter Embolisation of Proximal Type 1 Endoleaks Following Endovascular Aneurysm Sealing (EVAS) Using the Nellix Device: Technique and Outcomes

International Nuclear Information System (INIS)

Ameli-Renani, S.; Morgan, R. A.

2015-01-01

AimTo evaluate the technical success and mid-term outcomes following transcatheter embolisation of type 1a endoleak after Nellix endovascular aneurysm sealing (EVAS).Materials and MethodsSeven patients (5 men; mean age 83; range 79–90) underwent transcatheter embolisation between July 2013 and August 2014. The average time from EVAS to embolisation was 136 days (range 6–301) and from endoleak diagnosis to embolisation was 20 days (range 2–50). Embolisation was performed with coils and Onyx in six cases and Onyx only in one case. Technical success, imaging and clinical outcomes of embolisation were reviewed. Technical success was defined as elimination of the endoleak on completion angiography and first imaging follow-up. Clinical success was defined as unchanged or decreased aneurysm sac size on subsequent follow-up (average 8 months; range 103–471 days).ResultsAll cases were technically successful. One patient required a second endovascular procedure following Onyx reflux into the Nellix endograft and another patient required surgical closure of a brachial puncture site. All patients are endoleak free with stable sac size on the latest available follow-up imaging.ConclusionIf a type 1 endoleak occurs after EVAS, embolisation using Onyx with or without coils is feasible and effective with high technical success and freedom from endoleak recurrence at mid-term follow-up

A glimpse from the inside of a space suit: What is it really like to train for an EVA?

Science.gov (United States)

Gast, Matthew A.; Moore, Sandra K.

2011-01-01

The beauty of the view from the office of a spacewalking astronaut gives the impression of simplicity, but few beyond the astronauts, and those who train them, know what it really takes to get there. Extravehicular Activity (EVA) training is an intense process that utilizes NASA's Neutral Buoyancy Laboratory (NBL) to develop a very specific skill set needed to safely construct and maintain the orbiting International Space Station. To qualify for flight assignments, astronauts must demonstrate the ability to work safely and efficiently in the physically demanding environment of the space suit, possess an acute ability to resolve unforeseen problems, and implement proper tool protocols to ensure no tools will be lost in space. Through the insights and the lessons learned by actual EVA astronauts and EVA instructors, this paper will take you on a journey through an astronaut's earliest experiences working in the space suit, termed the Extravehicular Mobility Unit (EMU), in the underwater training environment of the NBL. This work details an actual Suit Qualification NBL training event, outlines the numerous challenges the astronauts face throughout their initial training, and the various ways they adapt their own abilities to overcome them. The goal of this paper is to give everyone a small glimpse into what it is really like to work in a space suit.

Preparation of the PET/PP/PE/EVA polymeric blend from PET bottles and modification studies induced by ionizing radiation

International Nuclear Information System (INIS)

Rossini, Edvaldo Luis

2005-01-01

The environmental pollution is one of the biggest problems nowadays. Amidst the pollutants, plastic and especially the packings type P ET bottles , which comprise of poly(ethylene terephthalate) (PET), polypropylene (PP), polyethylene (PE) and poly[ethylene-co-(vinyl acetate)] (EVA) are causing big damage in the environment. In this work, the polymeric blend PET/PP/PE/EVA was obtained by a process of simplified mechanical recycling from 'PET bottles' after consumption, with the objective to find solution to this environmental problem. It was also studied the different ionizing radiation doses effects (25, 50, 75, 100, 150, 200, 300, 400 e 500 kGy) on the blend properties using an electron beam accelerator. The mechanical (tensile strength, impact and hardness), thermal (Vicat softening temperature, differential scanning calorimetry and termogravimetric) and microscopic (light microscopy and scanning electron microscopy) properties of the blend were studied. The analysis of the results showed to be a not mixing and compatible blend, with mechanical and thermal properties (which appeared to be similar to the properties of the component material used in the blend in separate) satisfactory, resulting in a resistant material and of low cost, being able to be used in the production of parts that do not demand specifications techniques. The use of the ionizing radiation improved some of the mechanical and thermal properties of the blend (these modifications had been random and irregular, depending directly on the dose of applied radiation and the type of property) making possible more specific applications for this material. (author)

Las manifestaciones colectivas de duelo frente a la muerte de Eva Perón (Tucumán, 1952

Directory of Open Access Journals (Sweden)

Lucía Santos Lepera

2013-02-01

Full Text Available El objetivo del trabajo es analizar las manifestaciones colectivas de duelo que se desplegaron a partir de la muerte de Eva Perón el 26 de julio de 1952 en la provincia de Tucumán. En primer lugar, nos interesa analizar el rol que ocupó la institución eclesiástica en el programa de homenajes oficiales y, de este modo, dar cuenta de la multiplicación inédita de manifestaciones de fervor religioso visibles en ese contexto. En segundo lugar, nos proponemos avanzar en el análisis de las expresiones religiosas populares que rodearon la muerte de Eva Perón, las cuales conformaron una puesta en escena de la unión entre la Iglesia y el gobierno, y de la imbricación entre catolicismo y peronismo.

A performance improvement program applied to the Perry Nuclear Power Plant instrumentation and control section

International Nuclear Information System (INIS)

Anderson, G.R.

1987-01-01

The management at Cleveland Electric Illuminating Company sought to avoid problems typically encountered in the start-up of new nuclear generating units. In response to early indications that such problems may have been developing at their Perry Nuclear Power Plant, several performance improvement initiatives were undertaken. One of these initiatives was a performance improvement evaluation (PIE) for the instrumentation and control (IandC) section at Perry. The IandC PIE, which used a method designed to be adaptable to other disciplines as well, had important results that are applicable to other nuclear power plants

MANAGEMENT INSTRUMENTS USED FOR THE IMPROVEMENT OF THE ENTERPRISE VALUE CHAIN IN ORDER TO INCREASE ITS COMPETITIVENESS

OpenAIRE

Jolanta Walas-Trêbacz

2015-01-01

The aim of the article is to present stages realized in the process of improvement of the enterprise value chain and the characteristics of basic instruments used for searching directions to improve the efficiency of the enterprise value chain in order to increase its competitiveness in the market. The conducted analysis of the literature has allowed to explain the concept of the value chain. Furthermore, in the elaboration the scope of actions undertaken in the methodology to improve value c...

A evasão sob o olhar dos professores e alunos do curso de licenciatura em matemática do Campus Universitário de Sinop da Universidade do Estado de Mato Grosso – UNEMAT, em 2011/2

Directory of Open Access Journals (Sweden)

Luciana Mafalda Elias de Assis

2015-06-01

Full Text Available Este artigo apresenta os resultados de uma pesquisa sobre possíveis causas de evasão em um curso de licenciatura em Matemática de uma Universidade pública (UNEMAT. Alunos do curso e professores responderam questionários com perguntas relacionadas ao tema, além dos alunos evadidos do curso que ingressaram em 2011/2. A análise das respostas indica as possíveis causas da evasão e fornece alguns indicativos em como minimizar a evasão no curso. Palavras-chave: evasão; ensino superior; licenciatura em matemática; pesquisa qualitativa.

Aasta betoonehitise žürii kommentaarid võistlustöödele ja võitjaile / Eva Kiisler, Maritta Koivisto, Angel Andla...[jt.] ; intervjueerinud Mari Sarv ; kommenteerinud Mart Riikoja

Index Scriptorium Estoniae

2009-01-01

Konkursile "Aasta Betoonehitis 2008" annavad hinnangu Eva Kiisler (ajakirja "Ehitaja" peatoimetaja), Maritta Koivisto (Soome ajakirja "Betoni" peatoimetaja"), Angel Andla (Eesti Ehitusettevõtjate Liit), Heiki Meos (Eesti Ehitusinseneride Liit), Siim Sultson ("Äripäeva" ehitusvaldkonna toimetaja), Toomas Laur (Eesti Betooniühing), Ike Volkov (Eesti Arhitektide Liidu esimees), Mauno Inkinen (Eesti Projektbüroode Liit), Enno Rebane (Eesti Ehitusmaterjalide Tootjate Liidu tegevdirektor). Mart Riikoja žürii tööst

Processing of nanocomposites EVA/PVC/MMT in twin-screw extruder; Processamento de nanocompositos EVA/PVC/MMT em extrusora dupla rosca

Energy Technology Data Exchange (ETDEWEB)

Gehlen, A.; Barbutti Filho, W.R.; Francisquetti, E.L.; Andrade, M.Z.; Zattera, A.J., E-mail: ajzatter@ucs.b [Universidade de Caxias do Sul (UCS), RS (Brazil). Lab. de Polimeros

2010-07-01

Polymeric nanocomposites have some superior properties when compared to conventional polymer composites and is one of the most promising fields in the nanotechnology research. In a EVA (ethylene vinyl acetate) /PVC (poly vinyl chloride) matrix was incorporated different types of montmorillonite clays (an inorganic (Na{sup +}) and two organic modified (15A and 30B nanoclays). The mixtures were processed in a co-rotating twin-screw extruder at processing speeds of 200 and 400 rpm. Thermogravimetric analysis (TGA) shown that the inorganic and organic modified clays promoted a shift to higher temperatures in the degradation temperature., X-ray diffraction (XRD) and transmission electronic microscopy (TEM) shows a possible intercalation with the 15A clay, exfoliation with the 30B clay and formation of clusters in the Na{sup +} clay. For all clays studied, the increase in shear rate does not promote significant changes. (author)

Improvements in the quality of co-ordination of nursing care following implementation of the Resident Assessment Instrument in Dutch nursing homes.

NARCIS (Netherlands)

Achterberg, W.P.; Holtkamp, C.C.M.; Kerkstra, A.; Pot, A.M.; Ooms, M.E.; Ribbe, M.W.

2001-01-01

Aim: To study the effect of implementation of the Resident Assessment Instrument (RAI) on the quality of co-ordination of nursing care in Dutch nursing homes. Background: The Resident Assessment Instrument (RAI) was designed to improve the quality of care and quality of life in nursing homes. Until

A evasão na educação superior para o curso de bacharelado em sistema de informação

Directory of Open Access Journals (Sweden)

Michelli Slhessarenko

2014-03-01

Full Text Available http://dx.doi.org/10.5007/1983-4535.2014v7n1p128 O artigo faz menção à evasão de alunos do curso de Bacharelado em Sistema de Informação de uma Instituição Federal de Educação em Santa Catarina entre os anos de 2010 e 2011. Objetivou-se identificar as causas contribuintes para a evasão de alunos do curso e propor uma estratégia de marketing em serviços para reduzir a evasão de alunos. A metodologia utilizada compreende um estudo de caso de natureza qualitativa, procedimento de pesquisa documental A técnica utilizada para coleta de dados foram o questionário e a entrevista estruturada aplicada aos alunos evadidos do curso e representantes administrativos da instituição. A análise dos dados obtidos apontam como principais causas de evasão: a mudança de interesse, opção de vida ou indecisão profissional, a didática não eficiente dos professores, expectativas não atendidas em relação ao curso, a carga horária semanal de trabalho, os aspectos inadequados das salas de aula ao ensino, a falta de orientação adequada por parte da coordenação do curso e as dificuldades de acompanhamento do curso. As estratégias de marketing devem preocupar-se com o bem estar do aluno, sua orientação e adequação ao curso, preparando professores e melhorando a didática de ensino.

Entre Lilith y Eva: Björk canta E. E. Cummings

Directory of Open Access Journals (Sweden)

Jordi Mas López

2016-05-01

del poeta norteamericano en Sun In My Mouth y el resto de composiciones de Vespertine. Frente a la inequívoca exaltación del héroe solar de Cummings, Björk utiliza una mirada femenina que duda entre los referentes de Lilith, la mujer que encuentra su libertad fuera de la sociedad, y Eva, aquella cuya sumisión es socialmente productiva. El resultado es un discurso de gran valor artístico, pero sujeto, en lo ideológico, a las limitaciones que imponen los motivos de partida

Voluntary agreements with white certificates for energy efficiency improvement as a hybrid policy instrument

International Nuclear Information System (INIS)

Oikonomou, V.; Patel, M.K.; Rietbergen, M.; Van der Gaast, W.

2009-01-01

In this paper we examine the implementation of a combined policy scheme that consists of a traditional instrument, the voluntary agreements (VAs), and an innovative one, the white certificates (WhC). The basic structure of this scheme is that energy suppliers who undertake an energy efficiency obligation under a white certificate scheme can make use of voluntary actions to enhance investments in innovative energy savings projects. Energy suppliers and other market parties can additionally or in parallel participate in voluntary agreements and set energy efficiency targets. For fulfilling their voluntary agreement target, these market parties can receive tax exemptions or receive white certificates that they can sell in the market. Transaction costs and baseline definition for demonstrating energy efficiency improvement deserve special attention. This policy can assist a country to enhance energy efficiency improvement while it stimulates innovation. Cost effectiveness can be higher than the case of stand-alone policy instruments, since more financing options are available for more expensive projects. Nevertheless, the added value of the scheme lies more in the implementation of innovative measures for enhanced energy efficiency. Furthermore, market parties can discover more business opportunities in energy efficiency and establish a green image; hence an integrated scheme should achieve higher political acceptability. (author)

Planetary Protection Considerations in EVA System Design

Science.gov (United States)

Eppler, Dean B.; Kosmo, Joseph J.

2011-01-01

very little expression of these anomalies. hardware from the human-occupied area may limit (although not likely eliminate) external materials in the human habitat. Definition of design-to requirements is critical to understanding technical feasibility and costs. The definition of Planetary Protection needs in relation to EVA mission and system element development cost impacts should be considered and interpreted in terms of Plausible Protection criteria. Since EVA operations will have the most direct physical interaction with the Martian surface, PP needs should be considered in the terms of mitigating hardware and operations impacts and costs.

Assessment of health-cost externalities of air pollution at the national level using the EVA model system

Energy Technology Data Exchange (ETDEWEB)

Brandt, J.; Silver, J.D.; Frohn, L.M. (and others)

2011-07-15

Air pollution has significant negative impacts on human health and well-being, which entail substantial economic consequences. We have developed an integrated model system, EVA (External Valuation of Air pollution; Frohn et al., 2005; Andersen et al., 2007; Brandt et al., 2010), to assess health-related economic externalities of air pollution resulting from specific emission sources or sectors. The EVA system was initially developed to assess externalities from power production, but in this study it is extended to evaluate costs at the national level from all major emission sectors. In this study, we estimate the impacts and total externality costs from the main emission sectors in Denmark, representing the 10 major SNAP codes. Furthermore, we assess the impacts and externality costs of all emissions simultaneously from the whole of Europe as well as from international ship traffic in general, since this sector seems to be very important but is currently unregulated. (Author)

Instrumentation Technologies for Improving an Irradiation Testing of Nuclear Fuels and Materials at the HANARO

International Nuclear Information System (INIS)

Kim, Bong Goo; Park, Sung Jae; Choo, Ki Nam

2011-01-01

Over 50 years of nuclear fuels and materials irradiation testing has led to many countries developing significant improvements in instrumentation to monitor physical parameters and to control the test conditions in Materials Test Reactors (MTRs) or research reactors. Recent effort to deploy new fuels and materials in existing and advanced reactors has increased the demand for well-instrumented irradiation tests. Specifically, demand has increased for tests with sensors capable of providing real-time measurement of key parameters, such as temperature, geometry changes, thermal conductivity, fission gas release, cracking, coating buildup, thermal and fast flux, etc. This review paper documents the current state of instrumentation technologies in MTRs in the world and summarizes on-going research efforts to deploy new sensors. There is increased interest to irradiate new materials and reactor fuels for advanced PWRs and the Gen-IV reactor systems, such as SFRs (Sodium-cooled Fast Reactors), VHTRs (Very-High-Temperature Reactors), SCWRs (Supercritical-Water-cooled Reactors) and GFRs (Gas-cooled Fast Reactor). This review documents the current state of instrumentation technologies in MTRs in the world, identifies challenges faced by previous testing methods and how these challenges were overcome. A wide range of sensors are available to measure key parameters of interest during fuels and materials irradiations in MTRs. Such sensors must be reliable, small size, highly accurate, and able to withstand harsh conditions. On-going development efforts are focusing on providing MTR users a wider range of parameter measurements with increased accuracy. In addition, development efforts are focusing on reducing the impact of sensor on measurements by reducing sensor size. This report includes not only status of instrumentation using research reactors in the world to irradiate nuclear fuels and materials but also future directions relating to instrumentation technologies for

Nuclear instrumentation evaluation and analysis

International Nuclear Information System (INIS)

Park, Suk Jun; Han, Sang Joon; Chung, Chong Eun; Han, Kwang Soo; Kim, Dong Hwa; Park, Byung Hae; Moon, Je Sun; Lee, Chel Kwon; Song, Ki Sang; Choi, Myung Jin; Kim, Seung Bok; Kim, Jung Bok

1986-12-01

This project provides the program for improving instrumentation reliability as well as developing a cost-effective preventive maintenance activity through evaluation and analysis of nuclear instrumentation concerning pilot plants, large-scale test facilities and various laboratories on KAERI site. In addition, it discusses the program for enhancing safe operations and improving facility availability through establishment of maintenance technology. (Author)

Eesti Vabariigi 90. aastapäeva tähistamise muljeid / Vello Helk

Index Scriptorium Estoniae

Helk, Vello, 1923-2014

2008-01-01

Eesti Vabariigi juubeliaasta tähistamisest, endiste riigijuhtide mälestuse austamisest. Käsitletud on ka president Toomas Hendrik Ilvese kõnesid kindral Johan Laidoneri mälestusloengul Viimsi mõisas 12. veebruaril 2008, Ajutise Valitsuse liikmete büstide näituse avamisel 14. veebruaril 2008 Eesti Pangas, Eesti Vabariigi väljakuulutamise monumendi avamisel Pärnus 23. veebruaril 2008 ja Eesti Vabariigi väljakuulutamise 90. aastapäeva pidulikul kontsertaktusel 24. veebruaril 2008. Ilmunud ka: Eesti Elu 15. aug. 2008, lk. 5; Eesti Päevaleht (Stockholm) 28. aug. 2008, lk. 3

Architectural development of an advanced EVA Electronic System

Science.gov (United States)

Lavelle, Joseph

1992-01-01

An advanced electronic system for future EVA missions (including zero gravity, the lunar surface, and the surface of Mars) is under research and development within the Advanced Life Support Division at NASA Ames Research Center. As a first step in the development, an optimum system architecture has been derived from an analysis of the projected requirements for these missions. The open, modular architecture centers around a distributed multiprocessing concept where the major subsystems independently process their own I/O functions and communicate over a common bus. Supervision and coordination of the subsystems is handled by an embedded real-time operating system kernel employing multitasking software techniques. A discussion of how the architecture most efficiently meets the electronic system functional requirements, maximizes flexibility for future development and mission applications, and enhances the reliability and serviceability of the system in these remote, hostile environments is included.

Caracterização das propriedades reológicas e dinâmicas de composições de borracha natural com resíduo de EVA Characterization of rheological and dynamic properties of natural rubber compositions with waste EVA

Directory of Open Access Journals (Sweden)

Marcia G. Oliveira

2004-12-01

Full Text Available O resíduo de EVA oriundo das indústrias calçadistas é um material reticulado, que apresenta grande potencial de uso como carga em composições elastoméricas. Neste trabalho, foram avaliadas as propriedades reológicas e dinâmicas das composições de borracha natural (NR com resíduo de EVA (EVAR, determinadas com o auxílio do analisador de processamento de borracha (RPA. As composições não-vulcanizadas tiveram a sua viscosidade aumentada pela adição de teores crescentes de EVAR. Após a vulcanização essas composições apresentaram menor elasticidade que a NR pura, como evidenciado nas maiores taxas de relaxamento do módulo e nos maiores valores de tan delta. Este comportamento foi confirmado pelos resultados de tensão e alongamento na ruptura.The EVA waste (EVAR is a crosslinked material, which can be used as filler in rubber compositions. In this work, rheological and dynamic properties of natural rubber (NR compositions with EVAR were investigated before and after vulcanization with the help of a rubber processing analyzer (RPA. The filler content varied from 0 to 60 phr. The results showed that rheological properties of nonvulcanized compositions were clearly modified by the addition of EVAR, which contributed to an increase in viscosity. The modulus relaxation and the dynamic properties such as tan delta of vulcanized compositions were also affected, by the reduction of the elasticity of the compositions. The mechanical properties corroborated the behavior revealed by RPA analysis and indicated that EVAR acted as a non-reinforcing filler.

Improved Digit Span in Children after a 6-Week Intervention of Playing a Musical Instrument: An Exploratory Randomized Controlled Trial

Directory of Open Access Journals (Sweden)

Xia Guo

2018-01-01

Full Text Available Previous studies have reported that music training not only improves children's musical skills, but also enhances their cognitive functions. However, there is a disagreement about what domain(s might be affected. Moreover, effects of short-term (instrumental training have not been examined, although more basic studies have suggested neuroplasticity within several weeks. Consequently, the present exploratory pilot study investigated the effect of a six-week instrumental practice program (i.e., playing the keyboard harmonica on children's cognitive functions using a randomized controlled trial. Forty children (aged 6–8 years were randomly assigned to either the experimental group (n = 20, which received a 6-week (12-session keyboard harmonica curriculum, or an untrained control group (n = 20. Different from traditional instrumental training, the curriculum did not use musical scores to emphasize creating association between sound (auditory modality and finger movement (somato-motor system. Cognitive measurements included verbal ability, processing speed, working memory, and inhibitory control, which were administered before and after the curriculum in both groups. After the 6-week training, only the experimental group showed a significant improvement in the Digit Span test (especially in the Digit Span Backward that measures working memory. However, no significant influences were found on the other cognitive tests. The result suggests that several weeks of instrumental music training may be beneficial to improving children's working memory. In addition, we used an inexpensive and portable keyboard harmonica; therefore, our instructional method is easy to apply in classrooms or other circumstances. If the method is applied to music lessons in schools or in the community, it may help improve children's working memory.

Preparation of EVA/silica nano composites characterized with solid state nuclear magnetic resonance; Obtencao de nanocomposito de EVA/SILICA e caracterizacao por ressonancia magnetica nuclear no estado solido

Energy Technology Data Exchange (ETDEWEB)

Passos, Adriano A; Tavares, Maria I.B.; Neto, Roberto C.P.; Moreira, Leonardo A; Ferreira, Antonio G., E-mail: mibt@ima.ufrj.br [Centro de Tecnologia, Instituto de Macromoleculas Professora Eloisa Mano, Universidade Federal do Rio de Janeiro, Rio de Janeiro, RJ (Brazil)

2011-07-01

Nano composites of poly(ethylene-co-vinyl acetate)/silica (SiO{sub 2}) with dimensions of ca. 40 nm were prepared via solution intercalation employing chloroform as a solvent. They were mainly characterized with nuclear magnetic resonance spectroscopy (NMR) employing carbon-13 (polymeric matrix), silicon-29 (nanoparticles) and through the determination of the proton spin-lattice relaxation time in the rotating frame (T{sub 1{rho}H}) (polymer matrix). From the NMR results it was inferred that up to 5% of silica in mass a well dispersed nano composite was obtained, owing to a strong interaction between silica and the EVA matrix. (author)

Valor Econômico Adicionado (E.V.A.: uma ferramenta para mensuração da real lucratividade de uma operação ou empreendimento

Directory of Open Access Journals (Sweden)

Rodney Wernke

2000-01-01

Full Text Available To follow the changes in the way to administer companies, the accountant must have sufficient knowledge related to the Economic Value Added (EVA. The power of to the Economic Value Added (EVA concept was originated fron the idea that one can not know if an operation is really creating value, taking in to account the opportunit costof all the utilized capital. In most company operations, there is no idea of what or how much the valueaggregated by these companis. KEYWORDS: Economic value added; Measurement

Surmahiirte tants; Pühapäeva hommik; Unistus venna külaskäigust; Kolm päeva voodipuhkust; Veepiir; Ei sugutunnuseid ega muid iseärasusi : [Luuletused] / Wallace Stevens ; inglise k. tlk. ja järelsõna: Andres Ehin

Index Scriptorium Estoniae

Stevens, Wallace

1996-01-01

Autorist lk. 212. Luuletuste 'Unistus venna külaskäigust', 'Kolm päeva voodipuhkust', 'Veepiir' ja 'Ei sugutunnuseid ega muid iseärasusi', mis on samuti ekslikult sealsamas W. Stevensile omistatud, autor on tegelikult Carlos Stewal. Vt. Ehin, Andres. Veavabandus // Looming. 1995. Nr. 5. Lk. 718

[Controlling instruments in radiology].

Science.gov (United States)

Maurer, M

2013-10-01

Due to the rising costs and competitive pressures radiological clinics and practices are now facing, controlling instruments are gaining importance in the optimization of structures and processes of the various diagnostic examinations and interventional procedures. It will be shown how the use of selected controlling instruments can secure and improve the performance of radiological facilities. A definition of the concept of controlling will be provided. It will be shown which controlling instruments can be applied in radiological departments and practices. As an example, two of the controlling instruments, material cost analysis and benchmarking, will be illustrated.

Muusikamaailm : "Musica Nova" Helsingis. Revueltase tähtpäeva-aasta. Pendereckile elutööauhind / Priit Kuusk

Index Scriptorium Estoniae

Kuusk, Priit, 1938-

2000-01-01

Helsingi uue muusika festivalist "Musica Nova" 3.-11. märtsini. Möödus sajand S. Revueltase sünnist, tähtpäeva üritustest USAs. MIDEMi muusikamess Cannes'is andis viiendat korda välja eriauhinna väljapaistvale kaasaja heliloojale ئ seekord K. Pendereckile

Using EVA Method to Assess Achievement of BEJ Registered Retail Trade Company

Directory of Open Access Journals (Sweden)

Haryadi Sarjono

2009-03-01

Full Text Available This research aims to evaluate the the achievement in terms of the company finance, on whether it adds value or not to shareholders and investors in generating profit on top of used capital or normally mentioned as the method of EVA. This research was carried out against 10 retail trade companies that registered in BEJ during the finance year of 2005 by using the documentary or secondary data obtained from the Centre of the Pasar Modal Reference (PRPM in the Building of Bursa Efek Jakarta (BEJ. Evaluation results suggested 6 companies for future investment.

Design of economic incentive instruments in nutrition policy

DEFF Research Database (Denmark)

Jensen, Jørgen Dejgård

2011-01-01

• Economic incentives are instruments to improve diets and reduce the fraction of people exposed to diet-related health risks • Proper targeting and design of economic incentive instruments is important, if such instruments should be efficient and feasible policy measures in the improvement...... of dietary behaviour in industrialised countries • From a cost-effectiveness perspective, there are considerable potential for optimizing the targeting and design of economic incentive instruments in nutritional policy...

Health physics instrumentation needs

International Nuclear Information System (INIS)

Selby, J.M.; Swinth, K.L.; Kenoyer, J.L.

1984-10-01

Deficiencies and desirable improvements can be identified in every technical area in which health physics instruments are employed. The needed improvements cover the full spectrum including long-term reliability, human factors, accuracy, ruggedness, ease of calibration, improved radiation response, and improved mixed field response. Some specific areas of deficiency noted along with needed improvements. 17 references

Instrumentation

International Nuclear Information System (INIS)

Muehllehner, G.; Colsher, J.G.

1982-01-01

This chapter reviews the parameters which are important to positron-imaging instruments. It summarizes the options which various groups have explored in designing tomographs and the methods which have been developed to overcome some of the limitations inherent in the technique as well as in present instruments. The chapter is not presented as a defense of positron imaging versus single-photon or other imaging modality, neither does it contain a description of various existing instruments, but rather stresses their common properties and problems. Design parameters which are considered are resolution, sampling requirements, sensitivity, methods of eliminating scattered radiation, random coincidences and attenuation. The implementation of these parameters is considered, with special reference to sampling, choice of detector material, detector ring diameter and shielding and variations in point spread function. Quantitation problems discussed are normalization, and attenuation and random corrections. Present developments mentioned are noise reduction through time-of-flight-assisted tomography and signal to noise improvements through high intrinsic resolution. Extensive bibliography. (U.K.)

Template-Directed Instrumentation Reduces Cost and Improves Efficiency for Total Knee Arthroplasty: An Economic Decision Analysis and Pilot Study.

Science.gov (United States)

McLawhorn, Alexander S; Carroll, Kaitlin M; Blevins, Jason L; DeNegre, Scott T; Mayman, David J; Jerabek, Seth A

2015-10-01

Template-directed instrumentation (TDI) for total knee arthroplasty (TKA) may streamline operating room (OR) workflow and reduce costs by preselecting implants and minimizing instrument tray burden. A decision model simulated the economics of TDI. Sensitivity analyses determined thresholds for model variables to ensure TDI success. A clinical pilot was reviewed. The accuracy of preoperative templates was validated, and 20 consecutive primary TKAs were performed using TDI. The model determined that preoperative component size estimation should be accurate to ±1 implant size for 50% of TKAs to implement TDI. The pilot showed that preoperative template accuracy exceeded 97%. There were statistically significant improvements in OR turnover time and in-room time for TDI compared to an historical cohort of TKAs. TDI reduces costs and improves OR efficiency. Copyright © 2015 Elsevier Inc. All rights reserved.

Analysis of the mechanical resistance and porosity of a composite cement with EVA and reinforced with piacava fibers; Analise da resistencia mecanica e porosidade de um composito cimenticio leve com EVA e reforcado com fibras de piacava

Energy Technology Data Exchange (ETDEWEB)

Silva, R.M.; Dominguez, D.S.; Alvim, R.C.; Iglesias, S.M., E-mail: regilan@hotmail.com [Universidade Estadual de Santa Cruz (UESC), Ilheus, BA (Brazil)

2013-07-01

Nowadays, a lot of solid waste material is discarded into the environment. One of these residues is the EVA (Ethyl Vinyl Acetate) which has the footwear industry, as its main consumer. Studies are focused on the reusing of these materials, particularly in the civil construction, where is used as an aggregate in the production of light mortars. Due to the specific characteristics of lightweight concrete, is necessary to reinforce these materials. The palm Attalea Funifera Martius, known as piacava, may be an excellent alternative as a reinforcement element in light cement mixes. In this work, it's verified the mechanical strength of a composite lightweight cementitious with EVA and reinforced with Piacava fibers, also, the porosity of the new material was measured. To evaluate the mechanical properties of this new material was made mechanical tests and verified the importance of vegetal fibers as the material reinforcing. For the compound porosity evaluation, samples were studied using microcomputer tomography (μTC). With images processing techniques we identify and quantify the pores. The processing digital images through μTC showed up as a non-destructive method for efficient and acceptable results. (author)

Tallinna vanima reformatsioonijärgse raamatukogu Bibliotheca Revaliensis ad. D. Olai 450. aastapäeva tähistamiseks... / Sirje Lauring

Index Scriptorium Estoniae

Lauring Vaska, Sirje

1998-01-01

16 värvilise postkaardiga komplektist, mille EAR publitseeris Bibliotheca Revaliensis ad. D. Olai 450. aastapäeva tähistamiseks nimg oma raamatuharulduste tutvustamiseks. Postkaardikomplekti aluseks olevatest trükistest on raamatukogu baltikaosakond välja pannud näituse.

Investigation of compression behavior of PE/EVA foam injection molded parts

Science.gov (United States)

Spina, Roberto

2017-10-01

The main objective of the presented work is to evaluate the compression behavior of a polymeric foam blend by using a robust framework for the testing sequence of foaming injection molded parts, with the aim of establishing a standard testing cycle for the evaluation of new matrix material. The research purpose is to assess parameters influencing compression behavior and give useful suggestions for the implementation of a finite element analysis. The polymeric blend consisted of a mixture of low density polyethylenes (LDPEs), a high-density polyethylene (HDPE), an ethylene-vinyl acetate (EVA) and an azodicarbonamide (ADC). The thermal, rheological and compression properties of the blend are fully described, as well as the injection molding process for two specimen types.

Eva Giberti: trayectoria institucional, científica y cívica

Directory of Open Access Journals (Sweden)

Eva Giberti

2006-01-01

Full Text Available Pese a la diversidad de perspectivas abordadas por los autores, este texto ¿que presenta la trayectoria institucional, científica y cívica de Eva Giberti¿ destaca sus hitos y facetas: su actividad académica, su trayectoria integrando diferentes responsabilidades, su labor como clínica, su participación cívica, sus aportes en los medios de comunicación (donde fue la pionera en la divulgación del psicoanálisis y sus publicaciones (entre ellas, las dedicadas a la desmitificación de lo que se supone una familia. Los autores coinciden en una combinación de gratitud, cariño y respeto hacia esta mujer.

Eva Giberti: trayectoria institucional, científica y cívica

Directory of Open Access Journals (Sweden)

Eva Giberti

2006-10-01

Full Text Available Pese a la diversidad de perspectivas abordadas por los autores, este texto –que presenta la trayectoria institucional, científica y cívica de Eva Giberti– destaca sus hitos y facetas: su actividad académica, su trayectoria integrando diferentes responsabilidades, su labor como clínica, su participación cívica, sus aportes en los medios de comunicación (donde fue la pionera en la divulgación del psicoanálisis y sus publicaciones (entre ellas, las dedicadas a la desmitificación de lo que se supone una familia. Los autores coinciden en una combinación de gratitud, cariño y respeto hacia esta mujer.

Obtenção de nanocompósito de EVA/sílica e caracterização por ressonância magnética nuclear no estado sólido Preparation of EVA/silica nanocomposites characterized with solid state nuclear magnetic resonance

Directory of Open Access Journals (Sweden)

Adriano A. Passos

2011-01-01

Full Text Available Nanocompósitos a base de poli(etileno-co-acetato de vinila (EVA e óxido de sílica (SiO2, com tamanho nanométrico da ordem de 40 nm, foram preparados via intercalação por solução, empregando clorofórmio como solvente. Os nanocompósitos foram caracterizados principalmente pela espectroscopia de ressonância magnética nuclear (RMN, empregando a análise dos núcleos de carbono-13 (matriz polimérica; silício-29 (nanopartícula e pela determinação do tempo de relaxação spin-rede do núcleo de hidrogênio no eixo rotatório (T1rH (matriz polimérica. Pelos dados de RMN foi observado que até cerca de 5% de sílica em massa obteve-se um nanocompósito polimérico com boa dispersão da sílica devido a uma forte interação entre a sílica e matriz de EVA.Nanocomposites of poly(ethylene-co-vinyl acetate/silica (SiO2 with dimensions of ca. 40 nm were prepared via solution intercalation employing chloroform as a solvent. They were mainly characterized with nuclear magnetic resonance spectroscopy (NMR employing carbon-13 (polymeric matrix, silicon-29 (nanoparticles and through the determination of the proton spin-lattice relaxation time in the rotating frame (T1rH (polymer matrix. From the NMR results it was inferred that up to 5% of silica in mass a well dispersed nanocomposite was obtained, owing to a strong interaction between silica and the EVA matrix.

Conversion of IVA Human Computer Model to EVA Use and Evaluation and Comparison of the Result to Existing EVA Models

Science.gov (United States)

Hamilton, George S.; Williams, Jermaine C.

1998-01-01

This paper describes the methods, rationale, and comparative results of the conversion of an intravehicular (IVA) 3D human computer model (HCM) to extravehicular (EVA) use and compares the converted model to an existing model on another computer platform. The task of accurately modeling a spacesuited human figure in software is daunting: the suit restricts the human's joint range of motion (ROM) and does not have joints collocated with human joints. The modeling of the variety of materials needed to construct a space suit (e. g. metal bearings, rigid fiberglass torso, flexible cloth limbs and rubber coated gloves) attached to a human figure is currently out of reach of desktop computer hardware and software. Therefore a simplified approach was taken. The HCM's body parts were enlarged and the joint ROM was restricted to match the existing spacesuit model. This basic approach could be used to model other restrictive environments in industry such as chemical or fire protective clothing. In summary, the approach provides a moderate fidelity, usable tool which will run on current notebook computers.

ACRF Instrumentation Status and Information September 2009

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2009-10-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status and Information April 2009

Energy Technology Data Exchange (ETDEWEB)

Voyles, JW

2009-05-07

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status and Information August 2009

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2009-09-09

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status and Information July 2009

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2009-08-13

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status and Information - June 2009

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2009-06-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status and Information May 2009

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2009-05-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

(ReConstrução Mítica de Eva Perón no Romance Santa Evita (1996 – Tomás Eloy Martínez

Directory of Open Access Journals (Sweden)

Josiane Valcarenghi Ribeiro Nantes

2017-06-01

Full Text Available Eva Perón é um nome significativo na história política da Argentina, sua influência surtiu, e continua surtindo efeito, no povo desse país até os dias atuais. “Evita” foi odiada/amada em níveis extremos, tanto que foi considerada uma santa, um mito para muitas pessoas. Tomás Eloy Martínez escreveu o romance – Santa Evita (1995 – em que narra como viveu a esposa de Juan Domingo Perón. Nesta obra encontra-se muitos elementos que dão indícios da (remitificação de Eva, por isso tenta-se aqui, explorar como se deu a (reconstrução mitológica de Eva Perón, personagem histórica no romance Santa Evita (1996 de Tomás Eloy Martínez, e ainda, expor quais foram os procedimentos adotados pelo autor que (reconstruíram esse mito. Utiliza-se, como base teórica, Linda Hutcheon (1991 e Fleck (2007 no conceito de metaficção historiográfica, Mircea Eliade (1991 e Martín Cezar Feijó (1984 no que cabe à análise do Mito. Esta breve pesquisa se dará a partir da análise bibliográfica e de forma comparativa entre a história e a escrita ficcional do romance Santa Evita (1996 de Tomás Eloy Martínez, discute-se os elementos utilizados e o caminho percorrido para a (reconstrução do mito Eva Perón na obra citada.

A Practice Indexes for Improving Facial Movements of Brass Instrument Players

Science.gov (United States)

Ito, Kyoko; Hirano, Takeshi; Noto, Kazufumi; Nishida, Shogo; Ohtsuki, Tatsuyuki

Two experimental studies have been conducted in order to propose practice indexes for the improvement of the embouchure of French horn players, two experimental studies have been conducted. In both studies, the same task was performed by advanced and amateur French horn players. The first study investigated the activity, while performing the above-mentioned task, of the 5 facial muscles (levator labii superioris, zygomaticus major, depressor anguli oris, depressor labii inferioris, and risorius muscles) on the right side of the face by surface electromyography, and the facial movement on the left side of the face by attaching two markers above each muscle and using two high-speed cameras simultaneously. The results of the study showed that it is possible for the four markers around the lower lip to practice indexes. The second study evaluated whether the above-mentioned markers are appropriate as practice indexes using a 3-D tracking system and questionnaires. The results showed that both the advanced and the amateur players assessed that the markers were suitable as practice indexes for improving the embouchure. This set of approaches could be useful for selecting practice indexes and developing scientific practice methods not only for the French horn but also for other instruments and other fields.

Instrumented Suit Hard Upper Torso (HUT) for Ergonomic Assessment

Data.gov (United States)

National Aeronautics and Space Administration — It is well known that the EVA suit (EMU) has the potential to cause crew injury and decreased performance. Engineering data on the suit interaction of the human...

ESTUDIO cycEVA: CASOS Y CONTROLES PARA LA ESTIMACIÓN DE LA EFECTIVIDAD DE LA VACUNA ANTIGRIPAL EN ESPAÑA, 2008-2013

Directory of Open Access Journals (Sweden)

Silvia Jiménez-Jorge

2014-01-01

Full Text Available Fundamentos: Desde 2008-09 la efectividad de la vacuna (EV antigripal en España se estima con el estudio de casos y controles para la evaluación de la EV antigripal (cycEVA, componente español de la red europea (Influenza-Monitoring Vaccine Effectiveness (I-MOVE. El objetivo es describir la evolución del estudio cycEVA durante las cinco temporadas del período 2008/09– 2012/13. Métodos: Se analizaron los siguientes indicadores: 1 participación de los médicos/pediatras centinela (MP; 2 población y periodo de estudio, 3 calidad de los datos y 4 difusión de los resultados mediantes publicaciones. Se calculó el porcentaje anual de cambio constante de los indicadores analizándose su tendencia mediante el test de Cochran-Armitage. Resultados: El número de MP participantes aumentó de 164 en 2008-09 hasta 246 en ediciones posteriores. El porcentaje de médicos que reclutaron al menos un paciente experimentó un cambio anual significativo (PCA del 15,33%. El porcentaje de pacientes reclutados incluidos en el análisis aumen- tó del 77% en 2008-09 a más del 95% en las siguientes ediciones (PCA=5,91%. El porcentaje de casos y controles participantes en cycEVA sobre el total de pacientes que contribuyeron al estudio europeo I-MOVE osciló entre el 23% en la edición piloto y 30% en la temporada 2011-12. Los resultados finales se difundieron en revistas científicas con un factor de impacto situado en el cuartil 2 y en 2010-11 y 2011-12 se publicaron resultados preliminares en revistas con un factor de impacto situado en el cuartil 1 (97 citas. Conclusiones: La experiencia del estudio cycEVA se reflejó en una mejora en la oportunidad e impacto de sus resultados, cruciales para orientar las recomendaciones anuales de vacunación antigripal.

Aspects of progress in neutron instrumentation

International Nuclear Information System (INIS)

Carlile, C.J.

1999-01-01

The capability of neutron instrumentation in coming years will depend upon many factors, the main ones being the neutron source the instrument is sited on, the quality of the instrument itself, the quality of the support provided and the protocol for instrument operation. All of these factors must be optimised and improved upon to ensure consistently high quality scientific exploitation of an instrument. Examples of progress in each of these fields are given and a subjective view of possible future trends are hazarded. (author)

Los homenajes a Eva Perón como prácticas de memoria en tiempos de la Resistencia peronista (1955-1963

Directory of Open Access Journals (Sweden)

Anabella Evangelina Gorza

2016-04-01

Full Text Available El objetivo de este artículo apunta a visualizar los homenajes efectuados en memoria de Eva Perón como instancias de participación en la Resistencia peronista (1955-1963, a partir del análisis de fuentes periodísticas, informes de inteligencia y entrevistas. La observación de este tipo de prácticas nos ha permitido analizar cómo se realizó el proceso de construcción de memoria durante esta etapa y sus anclajes materiales, el carácter religioso que impregnó a dichas prácticas, y cómo la imagen de Eva Perón se constituyó en una instancia de legitimación para la participación política femenina, aunque fueron atributos conservadores los que habilitaron dicha participación.

EVA: Exome Variation Analyzer, an efficient and versatile tool for filtering strategies in medical genomics

Directory of Open Access Journals (Sweden)

Coutant Sophie

2012-09-01

Full Text Available Abstract Background Whole exome sequencing (WES has become the strategy of choice to identify a coding allelic variant for a rare human monogenic disorder. This approach is a revolution in medical genetics history, impacting both fundamental research, and diagnostic methods leading to personalized medicine. A plethora of efficient algorithms has been developed to ensure the variant discovery. They generally lead to ~20,000 variations that have to be narrow down to find the potential pathogenic allelic variant(s and the affected gene(s. For this purpose, commonly adopted procedures which implicate various filtering strategies have emerged: exclusion of common variations, type of the allelics variants, pathogenicity effect prediction, modes of inheritance and multiple individuals for exome comparison. To deal with the expansion of WES in medical genomics individual laboratories, new convivial and versatile software tools have to implement these filtering steps. Non-programmer biologists have to be autonomous combining themselves different filtering criteria and conduct a personal strategy depending on their assumptions and study design. Results We describe EVA (Exome Variation Analyzer, a user-friendly web-interfaced software dedicated to the filtering strategies for medical WES. Thanks to different modules, EVA (i integrates and stores annotated exome variation data as strictly confidential to the project owner, (ii allows to combine the main filters dealing with common variations, molecular types, inheritance mode and multiple samples, (iii offers the browsing of annotated data and filtered results in various interactive tables, graphical visualizations and statistical charts, (iv and finally offers export files and cross-links to external useful databases and softwares for further prioritization of the small subset of sorted candidate variations and genes. We report a demonstrative case study that allowed to identify a new candidate gene

PENGARUH MANAJEMEN ASET, MANAJEMEN LIABILITI, MANAJEMEN ASET LIABILITI TERHADAP ECONOMIC VALUE ADDED (EVA PADA PERBANKAN KONVENSIONAL YANG TERDAFTAR DI BURSA EFEK INDONESIA

Directory of Open Access Journals (Sweden)

H Hamidah

2013-08-01

Full Text Available Generally, company wants to optimize its profit. Properly manage the asset management, liability management and asset liability management can provide value added profits for the company. A sample of research consists of 18 banking companies listed at Indonesia Stock Exchange (IDX during the 2005-2009. This research investigate the relationship net loans/total earning assets (NLA, non performing loan (NPL, liabilities/total assets (LA, equity/total assets (EA, net interest margin (NIM, loan to deposite ratio (LDR on economic value added (EVA. The research use regression of panel data. The result show that net loans/total earning assets (NLA, liabilities/total assets (LA, equity/total assets (EA, net interest margin (NIM, loan to deposite ratio (LDR are have significant effect on economic value added (EVA but non performing loan (NPL.

Photographic coronagraph, Skylab particulate experiment T025. [earth atmospheric pollution and Kohoutek Comet monitoring

Science.gov (United States)

Giovane, F.; Schuerman, D. W.; Greenberg, J. M.

1977-01-01

A photographic coronagraph, built to monitor Skylab's extravehicular contamination, is described. This versatile instrument was used to observe the earth's vertical aerosol distribution and Comet Kohoutek (1973f) near perihelion. Although originally designed for deployment from the solar airlock, the instrument was modified for EVA operation when the airlock was rendered unusable. The results of the observations made in four EVA's were almost completely ruined by the failure of a Skylab operational camera used with the coronagraph. Nevertheless, an aerosol layer at 48 km was discovered in the southern hemisphere from the few useful photographs.

Implementing Earned Value Management in the CxP EVA Systems Project Office

Science.gov (United States)

Sorge, Les L.

2009-01-01

Earned Value Management (EVM), like project management, is as much art as it is science to develop an implementation plan for a project. This presentation will cover issues that were overcome and the implementation strategy to deploy Earned Value Management (EVM) within the Constellation Program (CxP), EVA Systems Project Office (ESPO), as well as discuss additional hurdles that currently prevent the organization from optimizing EVM. Each organization and each project within an organization needs to mold an EVM implementation plan around existing processes and tools, while at the same time revising those existing processes and tools as necessary to make them compatible with EVM. The ESPO EVM implementation covers work breakdown structure, organizational breakdown structure, control account, work/planning package development; integrated master schedule development using an integrated master plan; incorporating reporting requirements for existing funding process such as Planning, Programming, Budgeting, and Execution (PPBE) and JSC Internal Task Agreements (ITA); and interfacing with other software tools such as the Systems Applications and Products (SAP) accounting system and the CxP wInsight EVM analysis tool. However, there are always areas for improvement and EVM is no exception. As EVM continues to mature within the NASA CxP, these areas will continue to be worked to resolution to provide the Program Managers, Project Managers, and Control Account Managers the best EVM data possible to make informed decisions.

An Intelligent Hand-Held Microsurgical Instrument for Improved Accuracy

National Research Council Canada - National Science Library

Ang, Wei

2001-01-01

This paper presents the development and initial experimental results of the first prototype of Micron, an active hand-held instrument to sense and compensate physiological tremor and other unwanted...

Improving Student Perceptions of Science through the Use of State-of-the-Art Instrumentation in General Chemistry Laboratory

Science.gov (United States)

Aurentz, David J.; Kerns, Stefanie L.; Shibley, Lisa R.

2011-01-01

Access to state-of-the-art instrumentation, namely nuclear magnetic resonance (NMR) spectroscopy, early in the college curriculum was provided to undergraduate students in an effort to improve student perceptions of science. Proton NMR spectroscopy was introduced as part of an aspirin synthesis in a guided-inquiry approach to spectral…

University Reactor Instrumentation Program

International Nuclear Information System (INIS)

Vernetson, W.G.

1992-11-01

Recognizing that the University Reactor Instrumentation Program was developed in response to widespread needs in the academic community for modernization and improvement of research and training reactors at institutions such as the University of Florida, the items proposed to be supported by this grant over its two year period have been selected as those most likely to reduce foreed outages, to meet regulatory concerns that had been expressed in recent years by Nuclear Regulatory Commission inspectors or to correct other facility problems and limitations. Department of Energy Grant Number DE-FG07-90ER129969 was provided to the University of Florida Training Reactor(UFTR) facility through the US Department of Energy's University Reactor Instrumentation Program. The original proposal submitted in February, 1990 requested support for UFTR facility instrumentation and equipment upgrades for seven items in the amount of $107,530 with $13,800 of this amount to be the subject of cost sharing by the University of Florida and $93,730 requested as support from the Department of Energy. A breakdown of the items requested and total cost for the proposed UFTR facility instrumentation and equipment improvements is presented

How 3D patient-specific instruments improve accuracy of pelvic bone tumour resection in a cadaveric study.

Science.gov (United States)

Sallent, A; Vicente, M; Reverté, M M; Lopez, A; Rodríguez-Baeza, A; Pérez-Domínguez, M; Velez, R

2017-10-01

To assess the accuracy of patient-specific instruments (PSIs) versus standard manual technique and the precision of computer-assisted planning and PSI-guided osteotomies in pelvic tumour resection. CT scans were obtained from five female cadaveric pelvises. Five osteotomies were designed using Mimics software: sacroiliac, biplanar supra-acetabular, two parallel iliopubic and ischial. For cases of the left hemipelvis, PSIs were designed to guide standard oscillating saw osteotomies and later manufactured using 3D printing. Osteotomies were performed using the standard manual technique in cases of the right hemipelvis. Post-resection CT scans were quantitatively analysed. Student's t -test and Mann-Whitney U test were used. Compared with the manual technique, PSI-guided osteotomies improved accuracy by a mean 9.6 mm (p 5 mm and 27% (n = 8) were > 10 mm. In the PSI cases, deviations were 10% (n = 3) and 0 % (n = 0), respectively. For angular deviation from pre-operative plans, we observed a mean improvement of 7.06° (p Cite this article : A. Sallent, M. Vicente, M. M. Reverté, A. Lopez, A. Rodríguez-Baeza, M. Pérez-Domínguez, R. Velez. How 3D patient-specific instruments improve accuracy of pelvic bone tumour resection in a cadaveric study. Bone Joint Res 2017;6:577-583. DOI: 10.1302/2046-3758.610.BJR-2017-0094.R1. © 2017 Sallent et al.

High-Resolution Modelling of Health Impacts from Air Pollution for Denmark using the Integrated Model System EVA

Science.gov (United States)

Brandt, Jørgen; Andersen, Mikael S.; Bønløkke, Jakob; Christensen, Jesper H.; Hansen, Kaj M.; Hertel, Ole; Im, Ulas; Jensen, Steen S.; Ketzel, Matthias; Nielsen, Ole-Kenneth; Plejdrup, Marlene S.; Sigsgaard, Torben; Geels, Camilla

2015-04-01

We have developed an integrated health impact assessment system EVA (Economic Valuation of Air pollution; Brandt et al., 2013a; 2013b), based on the impact-pathway chain, to assess the health impacts and health-related economic externalities of air pollution resulting from specific emission sources or sectors. The system is used to support policymaking with respect to emission control. The EVA system has previously been used to assess the health impacts based on results from a regional model DEHM (the Danish Eulerian Hemispheric Model; Brandt et al., 2012). In this study we have used a coupling of two chemistry transport models to calculate the air pollution concentration at different scales; the DEHM model to calculate the air pollution levels with a resolution down to 5.6 km x 5.6 km and the UBM model (Urban Background Model ; Berkowicz, 2000; Brandt et al., 2001) to further calculate the air pollution at 1 km x 1 km resolution for Denmark using results from DEHM as boundary conditions. Both the emission data based on the SPREAD model (Plejdrup and Gyldenkærne, 2011) as well as the population density has been represented in the model system with the same high resolution. The new developments of the integrated model system will be presented as well as results for health impacts and related external costs over the years 2006-2014 for Denmark. Furthermore, a sensitivity study of the health impact using coarse and fine resolutions in the model system has been carried out to evaluate the effect of improved description of the geographical population distribution with respect to location of local emissions. References Berkowicz, R., 2000. A Simple Model for Urban Background Pollution. Environmental Monitoring and Assessment, 65, 1/2, 259-267. Brandt, J., J. H. Christensen, L. M. Frohn, F. Palmgren, R. Berkowicz and Z. Zlatev, 2001: "Operational air pollution forecasts from European to local scale". Atmospheric Environment, Vol. 35, Sup. No. 1, pp. S91-S98, 2001 Brandt

Instrument care: everyone's responsibility

Directory of Open Access Journals (Sweden)

Renée du Toit

2011-12-01

Full Text Available Everyone working in an ophthalmic operating theatre must be competent in the care, handling, storage, and maintenance of instruments. This will help to improve surgical outcomes, maintain an economic and affordable service for patients, and provide a safe environment for the wellbeing of patients and staff.Including instrument care in theatre courses and in-service training is one way of ensuring staff competence.

RBMK nuclear reactors: Proposals for instrumentation and control improvements to enhanced safety and availability. IEC technical report of type 3. Working material

International Nuclear Information System (INIS)

1995-01-01

The present material presents a CD+V draft report ''RBMK nuclear reactors: Proposals for instrumentation and control improvements to enhance safety and availability'' prepared by the Joint IEC/IAEA team during 1993-1995. Experience has demonstrated the need to improve the safety instrumentation of the RBMK type reactors using well proven modern technology. The working group identified the upgrades and changes of the highest priority based on the evaluation of the RBMK systems and the events where the instrumentation was found to be inadequate for safe operation. The subjects discussed in this document were not selected on a systematic basis but were selected by the IEC and IAEA experts as considered to be appropriate to the activities of the IEC and for which technical experience was available. The items identified therefore do not reflect any ranking of the safety issues or any priority or impact on safety of any of the measures were they to be implemented. Many important safety issued and areas where physical measures are required to improve safety have been omitted and indeed not even acknowledged in this document. The recommendations presented in the document differ from those normally produced by the IEC in the form of standards as they are of a transitory nature and some have already been overtaken by the continuing process of improvements to plant safety. Figs and tabs

Processing of nanocomposites EVA/PVC/MMT in twin-screw extruder

International Nuclear Information System (INIS)

Gehlen, A.; Barbutti Filho, W.R.; Francisquetti, E.L.; Andrade, M.Z.; Zattera, A.J.

2010-01-01

Polymeric nanocomposites have some superior properties when compared to conventional polymer composites and is one of the most promising fields in the nanotechnology research. In a EVA (ethylene vinyl acetate) /PVC (poly vinyl chloride) matrix was incorporated different types of montmorillonite clays (an inorganic (Na + ) and two organic modified (15A and 30B nanoclays). The mixtures were processed in a co-rotating twin-screw extruder at processing speeds of 200 and 400 rpm. Thermogravimetric analysis (TGA) shown that the inorganic and organic modified clays promoted a shift to higher temperatures in the degradation temperature., X-ray diffraction (XRD) and transmission electronic microscopy (TEM) shows a possible intercalation with the 15A clay, exfoliation with the 30B clay and formation of clusters in the Na + clay. For all clays studied, the increase in shear rate does not promote significant changes. (author)

Power station instrumentation

International Nuclear Information System (INIS)

Jervis, M.W.

1993-01-01

Power stations are characterized by a wide variety of mechanical and electrical plant operating with structures, liquids and gases working at high pressures and temperatures and with large mass flows. The voltages and currents are also the highest that occur in most industries. In order to achieve maximum economy, the plant is operated with relatively small margins from conditions that can cause rapid plant damage, safety implications, and very high financial penalties. In common with other process industries, power stations depend heavily on control and instrumentation. These systems have become particularly significant, in the cost-conscious privatized environment, for providing the means to implement the automation implicit in maintaining safety standards, improving generation efficiency and reducing operating manpower costs. This book is for professional instrumentation engineers who need to known about their use in power stations and power station engineers requiring information about the principles and choice of instrumentation available. There are 8 chapters; chapter 4 on instrumentation for nuclear steam supply systems is indexed separately. (Author)

Comparison of instrumented anterior interbody fusion with instrumented circumferential lumbar fusion.

Science.gov (United States)

Madan, S S; Boeree, N R

2003-12-01

Posterior lumbar interbody fusion (PLIF) restores disc height, the load bearing ability of anterior ligaments and muscles, root canal dimensions, and spinal balance. It immobilizes the painful degenerate spinal segment and decompresses the nerve roots. Anterior lumbar interbody fusion (ALIF) does the same, but could have complications of graft extrusion, compression and instability contributing to pseudarthrosis in the absence of instrumentation. The purpose of this study was to assess and compare the outcome of instrumented circumferential fusion through a posterior approach [PLIF and posterolateral fusion (PLF)] with instrumented ALIF using the Hartshill horseshoe cage, for comparable degrees of internal disc disruption and clinical disability. It was designed as a prospective study, comparing the outcome of two methods of instrumented interbody fusion for internal disc disruption. Between April 1994 and June 1998, the senior author (N.R.B.) performed 39 instrumented ALIF procedures and 35 instrumented circumferential fusion with PLIF procedures. The second author, an independent assessor (S.M.), performed the entire review. Preoperative radiographic assessment included plain radiographs, magnetic resonance imaging (MRI) and provocative discography in all the patients. The outcome in the two groups was compared in terms of radiological improvement and clinical improvement, measured on the basis of improvement of back pain and work capacity. Preoperatively, patients were asked to fill out a questionnaire giving their demographic details, maximum walking distance and current employment status in order to establish the comparability of the two groups. Patient assessment was with the Oswestry Disability Index, quality of life questionnaire (subjective), pain drawing, visual analogue scale, disability benefit, compensation status, and psychological profile. The results of the study showed a satisfactory outcome (scorelife questionnaire) score of 71.8% (28 patients) in

Innovative instrumentation for VVERs based in non-invasive techniques

International Nuclear Information System (INIS)

Jeanneau, H.; Favennec, J.M.; Tournu, E.; Germain, J.L.

2000-01-01

Nuclear power plants such as VVERs can greatly benefit from innovative instrumentation to improve plant safety and efficiency. In recent years innovative instrumentation has been developed for PWRs with the aim of providing additional measurements of physical parameters on the primary and secondary circuits: the addition of new instrumentation is made possible by using non-invasive techniques such as ultrasonics and radiation detection. These innovations can be adapted for upgrading VVERs presently in operation and also in future VVERs. The following innovative instrumentation for the control, monitoring or testing at VVERs is described: 1. instrumentation for more accurate primary side direct measurements (for a better monitoring of the primary circuit); 2. instrumentation to monitor radioactivity leaks (for a safer plant); 3. instrumentation-related systems to improve the plant efficiency (for a cheaper kWh)

The Effectiveness of Singing or Playing a Wind Instrument in Improving Respiratory Function in Patients with Long-Term Neurological Conditions: A Systematic Review.

Science.gov (United States)

Ang, Kexin; Maddocks, Matthew; Xu, Huiying; Higginson, Irene J

2017-03-01

Many long-term neurological conditions adversely affect respiratory function. Singing and playing wind instruments are relatively inexpensive interventions with potential for improving respiratory function; however, synthesis of current evidence is needed to inform research and clinical use of music in respiratory care. To critically appraise, analyze, and synthesize published evidence on the effectiveness of singing or playing a wind instrument to improve respiratory function in people with long-term neurological conditions. Systematic review of published randomized controlled trials and observational studies examining singing or playing wind instruments to improve respiratory function in individuals with long-term neurological conditions. Articles meeting specified inclusion criteria were identified through a search of the Medline, Embase, PsycINFO, Cochrane Library, CINAHL, Web of Science, CAIRSS for Music, WHO International Clinical Trials Registry Platform Search Portal, and AMED databases as early as 1806 through March 2015. Information on study design, clinical populations, interventions, and outcome measures was extracted and summarized using an electronic standardized coding form. Methodological quality was assessed and summarized across studies descriptively. From screening 584 references, 68 full texts were reviewed and five studies included. These concerned 109 participants. The studies were deemed of low quality, due to evidence of bias, in part due to intervention complexity. No adverse effects were reported. Overall, there was a trend toward improved respiratory function, but only one study on Parkinson's disease had significant between-group differences. The positive trend in respiratory function in people with long-term neurological conditions following singing or wind instrument therapy is of interest, and warrants further investigation. © the American Music Therapy Association 2017. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

HTGR Measurements and Instrumentation Systems

International Nuclear Information System (INIS)

Ball, Sydney J.; Holcomb, David Eugene; Cetiner, Mustafa Sacit

2012-01-01

This report provides an integrated overview of measurements and instrumentation for near-term future high-temperature gas-cooled reactors (HTGRs). Instrumentation technology has undergone revolutionary improvements since the last HTGR was constructed in the United States. This report briefly describes the measurement and communications needs of HTGRs for normal operations, maintenance and inspection, fuel fabrication, and accident response. The report includes a description of modern communications technologies and also provides a potential instrumentation communications architecture designed for deployment at an HTGR. A principal focus for the report is describing new and emerging measurement technologies with high potential to improve operations, maintenance, and accident response for the next generation of HTGRs, known as modular HTGRs, which are designed with passive safety features. Special focus is devoted toward describing the failure modes of the measurement technologies and assessing the technology maturity.

Towards improved instrumentation for assessing river-groundwater interactions in a restored river corridor

Directory of Open Access Journals (Sweden)

P. Schneider

2011-08-01

Full Text Available River restoration projects have been launched over the last two decades to improve the ecological status and water quality of regulated rivers. As most restored rivers are not monitored at all, it is difficult to predict consequences of restoration projects or analyze why restorations fail or are successful. It is thus necessary to implement efficient field assessment strategies, for example by employing sensor networks that continuously measure physical parameters at high spatial and temporal resolution. This paper focuses on the design and implementation of an instrumentation strategy for monitoring changes in bank filtration, hydrological connectivity, groundwater travel time and quality due to river restoration. We specifically designed and instrumented a network of monitoring wells at the Thur River (NE Switzerland, which is partly restored and has been mainly channelized for more than 100 years. Our results show that bank filtration – especially in a restored section with alternating riverbed morphology – is variable in time and space. Consequently, our monitoring network has been adapted in response to that variability. Although not available at our test site, we consider long-term measurements – ideally initiated before and continued after restoration – as a fundamental step towards predicting consequences of river restoration for groundwater quality. As a result, process-based models could be adapted and evaluated using these types of high-resolution data sets.

Analysis of the mechanical resistance and porosity of a composite cement with EVA and reinforced with piacava fibers

International Nuclear Information System (INIS)

Silva, R.M.; Dominguez, D.S.; Alvim, R.C.; Iglesias, S.M.

2013-01-01

Nowadays, a lot of solid waste material is discarded into the environment. One of these residues is the EVA (Ethyl Vinyl Acetate) which has the footwear industry, as its main consumer. Studies are focused on the reusing of these materials, particularly in the civil construction, where is used as an aggregate in the production of light mortars. Due to the specific characteristics of lightweight concrete, is necessary to reinforce these materials. The palm Attalea Funifera Martius, known as piacava, may be an excellent alternative as a reinforcement element in light cement mixes. In this work, it's verified the mechanical strength of a composite lightweight cementitious with EVA and reinforced with Piacava fibers, also, the porosity of the new material was measured. To evaluate the mechanical properties of this new material was made mechanical tests and verified the importance of vegetal fibers as the material reinforcing. For the compound porosity evaluation, samples were studied using microcomputer tomography (μTC). With images processing techniques we identify and quantify the pores. The processing digital images through μTC showed up as a non-destructive method for efficient and acceptable results. (author)

New technology in nuclear power plant instrumentation and control

International Nuclear Information System (INIS)

Anon.

1985-01-01

The primary topic of this book is what can be done to improve nuclear power plant operation safety and the economic benefits that can be gained with the utilization of advance instrumentation and control technology. Other topics discussed are the industry's reluctance to accept new designs determining cost effective improvements, and difficulties in meeting regulatory standards with new technology control. The subjects will be useful when considering the area of instrumentation and control for enhancing plant operation and safety. Contents: Advanced Instrumention, Plant Control and Monitoring, Plant Diagnostics and Failure Detection, Human Factors Considerations in Instrumentation and Control, NRC and Industry Perspective on Advanced Instrumentation and Control

A Study of elasto ferrite based on ethyl vinyl acetate (EVA) and elastomer thermoplastic (ETP) and its mechanical, microstructure and magnetic characterizations

International Nuclear Information System (INIS)

Sudirman; Ridwan; Mujamilah; Budiman, Silviani; Eka Putri, Febriyanti

2002-01-01

In industrial application, the magnetic properties of the magnetic composites do not have to be too high In China. the omset of composite bascd on hcxafcrritc (US S 52 million) is higer than thc compositc based on NdFeB (US S 13.5 million The use of polymcr as binder in magnctic compositcs gives matcrials with cxccllcnt properties such as light, flexible and cheap Thc elasticity of the magnetic composites depends on the properties of the polymer matrix used in the materials. When hexafemtc powder is binded with an elastic polymer. elastoferrite is obtained In this study, hexaferrite SrO.6Fe 2 O 3 (SrM) and BaO.6Fe 2 O 3 (BaM) which was calsinated at 1200 o was used with EV A/ETP as binder These two materials were mixed in Labo Palstomill at 130 o C for 7 minutcs with rotation speed of 30 rpm The volume fraction of the hexafcmtc powder was varrlcd (30. 40 and 50%). The mixture was pressed to obtaIn sheets. The sheets were characterization to obtain: mechanical, magnetlcal and microstructure properties. The particle size and shape of SrM and BaM podwer were measured with SEM. The particle size of SrM and BaM are 1.6 um and I.2 um respectively The SrM shape is flaky and the BaM shape is nodular Mechanical properties of the composite based on EVA is better than that based on ETP At 30% volume faction. the tensile strength of EVA composite is 44.(,8 kg/cm 3 while the ETP composite is 19.72 kg/cm 3 The magnetic properties of both composites (EVA and ETP) were charactcrized. The result show that for EVA composites, the lowest energy value was 0.0400 MGOe (30% BaM volume fractIon) and the highest energy value was 0.21860 MGOe (50% SrM volume fraction). For ETP composites, the lowest energy value 0.0242 MGOe (30% SrM volume fractIon) and the hghest energy value was 02262 MGOe (40% BaM volume fraction)

Sistema E.V.A. 1.0

Directory of Open Access Journals (Sweden)

Díaz Córdova, D. M.

2003-01-01

Full Text Available Dentro del campo del crecimiento y desarrollo, el cálculo antropométrico, es una de las herramientas más utilizadas para encontrar indicadores válidos del estado general del crecimiento biológico de una población en su interacción con los diversos factores sociales. Frente al evidente proceso de pauperización por el que viene transcurriendo el país, la evaluación del estado nutricional de la población infantil, tanto en sus aspectos poblacionales como individuales, se hace necesaria y cotidiana. Presentamos aquí un software de escritorio que permite el cálculo y la graficación de las principales variables antropométricas. El E.V.A. 1.0 (Evaluación y Visualización Antropométrica brinda también la posibilidad de almacenar los datos, de incorporar tablas de comparación (por default el sistema trae las tablas de la SAP y del NCHS, y de exportar la información al programa EPINFO y a la mayoría de las aplicaciones estándar de escritorio (planillas de cálculo, procesadores de texto, etc.. La aplicación posee también una modalidad de sugerencias de diagnóstico, con referencias bibliográficas, que puede ser de ayuda, tanto para el profesional de A.P.S. como para el investigador.

In-pile instrumentation improvements for fuel irradiations in test reactor

International Nuclear Information System (INIS)

Blanc, J.Y.; Bernard, J.L.; Estrade, J.; Geoffroy, G.

1996-01-01

Knowledge of fuel limits and safety margins in normal and off-normal transients in nuclear power plants remains a constant preoccupation for electricity producers and fuel manufacturers. Accurate determination of such limits, through fuel irradiation testing in the OSIRIS reactor at Saclay is closely linked to the reliability of appropriate instrumentation techniques. Two paths are currently followed to obtain short experimental rods: segmented fuel coming directly from power plants, or re-fabrication of rods in hot cells with our FABRICE process. It can be associated with instrumentation such as fuel centerline thermocouple in annular pellets, pressure transducer or fission gas release measurement by gamma-spectrometry using helium sweeping, in analytic experiments. Our present development, to be implemented in 1993, is the the centerline instrumentation of a fuel column with solid pellets. Inserting the thermocouple requires a cold drilling machine, using CO 2 freezing of broken UO 2 (with liquid nitrogen). During the fuel rod irradiation itself, we try to lower the uncertainties associated to power determination, using thermal balance or neutronic calibration, or even gamma spectrometry. A description of the new test train designed for the ISABELLE water loop in OSIRIS is given, with special emphasis on instrumentation: a LVDT for measuring fuel rod elongation and eventual clad failure, and increased number and better localization of thermocouples and SPDN. The third part is devoted to the measurements by optical microdensitometry of neutron radiographs of the fuel pellet dish modification after irradiation. Dishes are generally disappearing through thermal and mechanical deformation of the pellet, and this can eventually be modelized to better understand pellet-cladding mechanical interaction. (author). 3 refs, 5 figs

Improved instrumentation for intensity-, wavelength-, temperature-, and magnetic field-resolved photoconductivity spectroscopy

International Nuclear Information System (INIS)

Cottingham, Patrick; Morey, Jennifer R.; Lemire, Amanda; Lemire, Penny; McQueen, Tyrel M.

2016-01-01

We report instrumentation for photovoltage and photocurrent spectroscopy over a larger continuous range of wavelengths, temperatures, and applied magnetic fields than other instruments described in the literature: 350 nm≤λ≤1700 nm, 1.8 K≤T≤300 K, and B≤9 T. This instrument uses a modulated monochromated incoherent light source with total power<30 μW in combination with an LED in order to probe selected regions of non-linear responses while maintaining low temperatures and avoiding thermal artifacts. The instrument may also be used to measure a related property, the photomagnetoresistance. We demonstrate the importance of normalizing measured responses for variations in light power and describe a rigorous process for performing these normalizations. We discuss several circuits suited to measuring different types of samples and provide analysis for converting measured values into physically relevant properties. Uniform approaches to measurement of these photoproperties are essential for reliable quantitative comparisons between emerging new materials with energy applications. - Highlights: • A novel instrument for measuring photoconductivity and photocurrents of materials and devices. • Continuous parameter space: 350 nm≤λ≤1700, 1.8 K≤T≤300 K, and B≤9 T. • Methodology for treating non-linear responses and variable lamp intensity. • Mathematical detail for extracting properties of materials from measured values is provided.

Performance of BATAN-SANS instrument

Energy Technology Data Exchange (ETDEWEB)

Ikram, Abarrul; Insani, Andon [National Nuclear Energy Agency, P and D Centre for Materials Science and Technology, Serpong (Indonesia)

2003-03-01

SANS data from some standard samples have been obtained using BATAN-SANS instrument in Serpong. The experiments were performed for various experimental set-ups that involve different detector positions and collimator lengths. This paper describes the BATAN-SANS instrument briefly as well as the data taken from those experiments and followed with discussion of the results concerning the performance and calibration of the instrument. The standard samples utilized in these experiments include porous silica, polystyrene-poly isoprene, silver behenate, poly ball and polystyrene-poly (ethylene-alt-propylene). Even though the results show that BATAN-SANS instrument is in good shape, but rooms for improvements are still widely open especially for the velocity selector and its control system. (author)

Towards a Diagnostic Instrument to Identify Improvement Opportunities for Quality Controlled Logistics in Agrifood Supply Chain Networks

Directory of Open Access Journals (Sweden)

Jack G.A.J. van der Vorst

2011-10-01

Full Text Available  Western-European consumers have become not only more demanding on product availability in retail outlets but also on other food attributes such as quality, integrity, and safety. When (redesigning food supply-chain networks, from a logistics point of view, one has to consider these demands next to traditional efficiency and responsiveness requirements. The concept ‘quality controlled logistics’ (QCL hypothesizes that if product quality in each step of the supply chain can be predicted in advance, goods flows can be controlled in a pro-active manner and better chain designs can be established resulting in higher product availability, constant quality, and less product losses. The paper discusses opportunities of using real-time product quality information for improvement of the design and management of ‘AgriFood Supply Chain Networks’, and presents a preliminary diagnostic instrument for assessment of ‘critical quality’ and ‘logistics control’ points in the supply chain network. Results of a tomato-chain case illustrate the added value of the QCL concept for identifying improvement opportunities in the supply chain as to increase both product availability and quality. Future research aims for the further development of the diagnostic instrument and the quantification of costs and benefits of QCL scenarios.

Adaptação, rendimento, evasão e vivências acadêmicas no ensino superior: revisão da literatura

Directory of Open Access Journals (Sweden)

Cristiane Maria Barra da Matta

Full Text Available Resumo O início da vida acadêmica é um período de grandes mudanças para o estudante, que muitas vezes é tratado de forma infantilizada no ensino médio e se depara com as responsabilidades e exigências da universidade. O presente trabalho teve como objetivo revisar artigos, publicados entre 2005 e 2015, referentes à adaptação universitária relacionada às vivências acadêmicas, rendimento e evasão, no curso de Engenharia. Para tanto, foram realizadas pesquisas nas seguintes bases de dados eletrônicos: Biblioteca Virtual de Saúde (BVS, Scielo Brasil e Portal de Periódicos Eletrônicos de Psicologia (PePSIC.Utilizaram-se os descritores: adaptação acadêmica, vivências acadêmicas, rendimento acadêmico, evasão e engenharia. Foram encontrados 55 artigos, porém somente 16 atenderam os critérios de inclusão. A maioria dos artigos empíricos relacionados (66,7% utiliza o instrumento Questionário de Vivências Acadêmicas (QVA ou Questionário de Vivências Acadêmicas - versão reduzida (QVA-r. Dois deles (13,3% utilizaram esse instrumento conjuntamente com o Inventário de Habilidades Sociais e outros três (20,0% com o Questionário de caracterização dos estudantes. Conclui-se que os relacionamentos interpessoais podem favorecer o rendimento acadêmico e adiar a evasão, assim como os serviços de apoio aos estudantes; e constatou-se a escassez do tema em questão nos cursos de engenharia.

Crew Systems for Asteroid Exploration: Concepts for Lightweight & Low Volume EVA Systems

Science.gov (United States)

Mueller, Rob; Calle, Carlos; Mantovani, James

2013-01-01

This RFI response is targeting Area 5. Crew Systems for Asteroid Exploration: concepts for lightweight and low volume robotic and extra-vehicular activity (EVA) systems, such as space suits, tools, translation aids, stowage containers, and other equipment. The NASA KSC Surface Systems Office, Granular Mechanics and Regolith Operations (GMRO) Lab and the Electrostatics & Surface Physics Lab (ESPL) are dedicated to developing technologies for operating in regolith environments on target body surfaces. We have identified two technologies in our current portfolio that are highly relevant and useful for crews that will visit a re-directed asteroid in Cis-Lunar Space. Both technologies are at a high TRL of 5/6 and could be rapidly implemented in time for an ARM mission in this decade.

Asteroid Redirect Crewed Mission Space Suit and EVA System Architecture Trade Study

Science.gov (United States)

Bowie, Jonathan T.; Blanco, Raul A.; Watson, Richard D.; Kelly, Cody; Buffington, Jesse; Sipila, Stephanie A.

2014-01-01

This paper discusses the Asteroid Redirect Crewed Mission (ARCM) space suit and Extravehicular Activity (EVA) architecture trade study and the current state of the work to mature the requirements and products to the mission concept review level. The mission requirements and the resulting concept of operations will be discussed. A historical context will be presented as to present the similarities and differences from previous NASA missions. That will set the stage for the trade study where all options for both pressure garment and life support were considered. The rationale for the architecture decisions will then be presented. Since the trade study did identity risks, the subsequent tests and analyses that mitigated the risks will be discussed. Lastly, the current state of the effort will be provided.

ACRF Instrumentation Status: New, Current, and Future January 2007

Energy Technology Data Exchange (ETDEWEB)

Liljegren, JC

2007-01-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future October 2006

Energy Technology Data Exchange (ETDEWEB)

JC Liljegren

2006-10-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future May 2007

Energy Technology Data Exchange (ETDEWEB)

JC Liljegren

2007-05-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future February 2007

Energy Technology Data Exchange (ETDEWEB)

JC Liljegren

2007-02-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development

ACRF Instrumentation Status: New, Current, and Future May 2007

Energy Technology Data Exchange (ETDEWEB)

JC Liljegren

2007-04-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future March 2007

Energy Technology Data Exchange (ETDEWEB)

JC Liljegren

2007-03-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - February 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-03-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - March 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-04-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

Recent improvements to the DIII-D neutral beam instrumentation and control system

International Nuclear Information System (INIS)

Kellman, D.H.; Hong, R.

1997-11-01

The DIII-D neutral beam (NB) instrumentation and control (I and C) system provides for operational control and synchronization of the eight DIII-D neutral beam injection systems, as well as for pertinent data acquisition and safety interlocking. Recently, improvements were made to the I and C system. With the replacement of the NB control computers, new signal interfacing was required to accommodate the elimination of physical operator panels, in favor of graphical user interface control pages on computer terminal screens. The program in the mode control (MC) programmable logic controller (PLC), which serves as a logic-processing interface between the NB control computers and system hardware, was modified to improve the availability of NB heating of DIII-D plasmas in the event that one or more individual beam systems suddenly become unavailable while preparing for a tokamak experimental shot sequences. An upgraded computer platform was adopted for the NB control system operator interface and new graphical user interface pages were developed to more efficiently display system status data. A failure mode of the armor tile infrared thermometers (pyrometers), which serve to terminate beam pulsing if beam shine-through overheats wall thermal shielding inside the DIII-D tokamak, was characterized such that impending failures can be detected and repairs effected to mitigate beam system down-time. The hardware that controls gas flow to the beamline neutralizer cells was upgraded to reduce susceptibility to electromagnetic interference (EMI), and interlocking was provided to terminate beam pulsing in the event of insufficient neutralizer gas flow. Motivation, implementation, and results of these improvements are presented

Lunar EVA Dosimetry: Microdosimeter-Dosimeter Instrument (PI Ziegler)

Data.gov (United States)

National Aeronautics and Space Administration — NOTE: Former PI Vincent Pisacane retired as of 9/30/2011; James Ziegler is new PI effective 10/1/2011 and project continues, per NSBRI. See Pisacane for FY2011 and...

EFFECTS OF ETHYLENE VINYL ACETATE CONTENT ON PHYSICAL AND MECHANICAL PROPERTIES OF WOOD-PLASTIC COMPOSITES

Directory of Open Access Journals (Sweden)

Dongfang Li,

2012-05-01

Full Text Available To investigate the effects of different ethylene vinyl acetate (EVA contents on the performance of wood plastic composites (WPCs made from poplar wood flour (PWF and high density polyethylene (HDPE, physical properties tests, mechanical properties tests, and scanning electron microscope (SEM tests were employed. The thermal stability and functional groups of PWF treated by EVA were evaluated by thermogravimetric analysis (TGA, differential thermal analysis (DTA, and Fourier transform infrared spectroscopy (FTIR, respectively. The results showed that the hardness, water uptake, and thickness swelling of the WPCs was reduced with increasing content of EVA. The MOR and tensile strength of the WPC treated by 15% EVA content were enhanced by 17.48% and 9.97%, respectively, compared with those of the WPC without EVA. TGA results showed that the thermal stability of PWF treated by EVA was improved. FTIR analysis indicated that PWF was reacted and coated with EVA. SEM results showed that gaps and voids hardly existed in the sections of the WPCs treated by EVA. This research suggests that the flexibility and mechanical properties of WPCs could be improved by adding EVA. The best condition of EVA content could be 15%.

[Student evaluation of anesthesiological teaching: steering instrument of a continuous improvement process].

Science.gov (United States)

Wittmann, M; Boehm, O; Thiessen, N; Hoeft, A; Knuefermann, P; Baumgarten, G

2012-07-01

The amendment to the higher education act ("Hochschulrahmengesetz") of 1998 postulates an evaluation of teaching for quality assurance. Hence, in the winter semester of 2004 the University Medical Center of Bonn introduced a semester questionnaire for students to evaluate the quality of teaching (EVALON). This evaluation is designed to be an objective benchmarking tool which is used for the distribution of university funds. It is also a steering instrument for direct improvement of teaching in clinical subjects. The aim of this study was to investigate, whether EVALON improved the quality of teaching between 2006 and 2010 and whether the department of anesthesiology improved its ranking in comparison with the other participating institutes. Data from the EVALON questionnaire from the years 2006-2010 were analyzed for improvements in the quality of teaching in anesthesiology. This study focused on three essential contents of the EVALON questionnaire (structural content and organizational procedure of lectures and seminars, course presentation), which were used for the generation of a ranking list of all participating medical institutes and departments. On the basis of these results, 12.5% of the funding was assigned for educational purposes. There was an average return rate of the questionnaires of 74.5%. A significant increase in the overall assessment score of 43.4% could be observed from 5.3 in the summer semester of 2006 to 7.6 in the winter semester of 2009/10. The evaluation score for the department of anesthesiology concerning structural content of seminars and lectures increased by 79% from 4.8 in 2006 to 8.6 in 2010. The quality of organizational procedure was evaluated with a score of 4.9 in 2006 and improved by 74% to 8.5 in 2010. The course presentation skills of the teachers as evaluated by EVALON improved by 61% from a score of 5.2 in 2006 to 8.4 in 2010. In comparison with all other participating medical institutes the department of anesthesiology

Instrument reliability for high-level nuclear-waste-repository applications

International Nuclear Information System (INIS)

Rogue, F.; Binnall, E.P.; Armantrout, G.A.

1983-01-01

Reliable instrumentation will be needed to evaluate the characteristics of proposed high-level nuclear-wasted-repository sites and to monitor the performance of selected sites during the operational period and into repository closure. A study has been done to assess the reliability of instruments used in Department of Energy (DOE) waste repository related experiments and in other similar geological applications. The study included experiences with geotechnical, hydrological, geochemical, environmental, and radiological instrumentation and associated data acquisition equipment. Though this paper includes some findings on the reliability of instruments in each of these categories, the emphasis is on experiences with geotechnical instrumentation in hostile repository-type environments. We review the failure modes, rates, and mechanisms, along with manufacturers modifications and design changes to enhance and improve instrument performance; and include recommendations on areas where further improvements are needed

A Simultaneous Analytical Method for Duplex Identification of Porcine and Horse in the Meat Products by EvaGreen based Real-time PCR.

Science.gov (United States)

Sakalar, Ergün; Ergün, Seyma Özçirak; Akar, Emine

2015-01-01

A duplex real-time polymerase chain reaction (PCR) based assay for the detection of porcine and horse meat in sausages was designed by using EvaGreen fluorescent dye. Primers were selected from mitochondrial 12S rRNA and 16S rRNA genes which are powerful regions for identification of horse and porcine meat. DNA from reference samples and industrial products was successfully extracted using the GIDAGEN® Multi-Fast DNA Isolation Kit. Genomes were identified based on their specific melting peaks (Mp) which are 82.5℃ and 78℃ for horse and porcine, respectively. The assay used in this study allowed the detection of as little as 0.0001% level of horse meat and 0.001% level of porcine meat in the experimental admixtures. These findings indicate that EvaGreen based duplex real-time PCR is a potentially sensitive, reliable, rapid and accurate assay for the detection of meat species adulterated with porcine and horse meats.

ARM Climate Research Facility Monthly Instrument Report August 2010

Energy Technology Data Exchange (ETDEWEB)

Voyles, JW

2010-09-28

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - April 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-05-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - December 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2009-01-15

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future February 2009

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2009-02-15

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - September 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-10-15

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - July 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-07-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - August 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-09-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - June 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-07-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - October 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-10-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ARM Climate Research Facility Monthly Instrument Report September 2010

Energy Technology Data Exchange (ETDEWEB)

Voyles, JW

2010-10-18

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future March 2009

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2009-03-15

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - May 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-05-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - January 2009

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2009-03-02

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ARM Climate Research Facility Monthly Instrument Report May 2010

Energy Technology Data Exchange (ETDEWEB)

Voyles, JW

2010-06-21

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - November 2008

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-12-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ARM Climate Research Facility Monthly Instrument Report June 2010

Energy Technology Data Exchange (ETDEWEB)

Voyles, JW

2010-07-13

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ARM Climate Research Facility Monthly Instrument Report July 2010

Energy Technology Data Exchange (ETDEWEB)

Voyles, JW

2010-08-18

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Fuel Oxidizer Reaction Products (FORP) Contamination of Service Module (SM) and Release of N-nitrosodimethylamine(NDMA)in a Humid Environment from Crew EVA Suits Contaminated with FORP

Science.gov (United States)

Schmidl, William; Mikatarian, Ron; Lam, Chiu-Wing; West, Bil; Buchanan, Vanessa; Dee, Louis; Baker, David; Koontz, Steve

2004-01-01

The Service Module (SM) is an element of the Russian Segment of the International Space Station (ISS). One of the functions of the SM is to provide attitude control for the ISS using thrusters when the U.S. Control Moment Gyros (CMG's) must be desaturated. Prior to an Extravehicular Activity (EVA) on the Russian Segment, the Docking Compartment (DC1) is depressurized, as it is used as an airlock. When the DC1 is depressurized, the CMG's margin of momentum is insufficient and the SM attitude control thrusters need to fire to desaturate the CMG's. SM roll thruster firings induce contamination onto adjacent surfaces with Fuel Oxidizer Reaction Products (FORP). FORP is composed of both volatile and non-volatile components. One of the components of FORP is the potent carcinogen N-nitrosdimethylamine (NDMA). Since the EVA crewmembers often enter the area surrounding the thrusters for tasks on the aft end of the SM and when translating to other areas of the Russian Segment, the presence of FORP is a concern. This paper will discuss FORP contamination of the SM surfaces, the release of NDMA in a humid environment from crew EVA suits, if they happen to be contaminated with FORP, and the toxicological risk associated with the NDMA release.

Analisis Perbandingan Kinerja Keuangan Sebelum Dan Sesudah Merger Dengan Menggunakan Metode Economic Value Added (Eva Dan Market Value Added (Mva Pada Pt Unilever Indonesia Tbk

Directory of Open Access Journals (Sweden)

Rakhmi Ayu Zulvina

2010-04-01

Full Text Available Merger is a decision to combine or merge two or more companies into one new company. One of the merged company in Indonesia is PT Unilever Indonesia Tbk with PT Knorr Indonesia in 2004. To identify and analyze it, EVA and MVA method is used, then the results of the calculations tested using normality test statistical tool kolmogorov smirnov, and carried out by means of differential test paired samples T-test.The increase of  EVA before and after the merger worth 125.30%. While the increase in MVA before and after the merger worth 227.33%. Increasing the value of MVA was more due to the company's market value, which is reflected in the share price and listed share, although not free from invested capital in the company

Instrumentalization of Eating Improves Weight Loss Maintenance in Obesity

Directory of Open Access Journals (Sweden)

Bodil Just Christensen

2017-12-01

Full Text Available Aim: The purpose of this study was to identify psychosocial determinants for maintaining weight loss. Methods: 42 obese individuals who achieved a 12% weight loss before entering a 52-week weight maintenance program were interviewed qualitatively. Psychosocial factors related to weight loss maintenance were identified in two contrasting groups: weight reducers and weight regainers. Groups were defined by health-relevant weight maintenance (additional weight loss > 3% at week 52, n = 9 versus weight gain > 3%, at week 52, n = 20. Results: Weight reducers reported structured meal patterns (p = 0.008, no comfort eating (p = 0.016 and less psychosocial stress (p = 0.04 compared to weight regainers. The ability to instrumentalize eating behavior emerged as an important factor (p = 0.007. Nutritional knowledge, motivation or exercise level did not differ between groups (p > 0.05. Conclusions: Successful weight loss maintenance was associated with an interplay between behavioral, affective and contextual changes. ‘Instrumentalization of eating behavior' seems to be an important element in long-term weight maintenance.

ACRF Instrumentation Status: New, Current, and Future July 2006

Energy Technology Data Exchange (ETDEWEB)

JC Liljegren

2006-07-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in blue text.

ACRF Instrumentation Status: New, Current, and Future September 2006

Energy Technology Data Exchange (ETDEWEB)

JC Liljegren

2006-09-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in blue text.

ACRF Instrumentation Status: New, Current, and Future August 2006

Energy Technology Data Exchange (ETDEWEB)

JC Liljegren

2006-08-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development. New information is highlighted in blue text.

Characterization of Thermo-Physical Properties of EVA/ATH: Application to Gasification Experiments and Pyrolysis Modeling

Directory of Open Access Journals (Sweden)

Bertrand Girardin

2015-11-01

Full Text Available The pyrolysis of solid polymeric materials is a complex process that involves both chemical and physical phenomena such as phase transitions, chemical reactions, heat transfer, and mass transport of gaseous components. For modeling purposes, it is important to characterize and to quantify the properties driving those phenomena, especially in the case of flame-retarded materials. In this study, protocols have been developed to characterize the thermal conductivity and the heat capacity of an ethylene-vinyl acetate copolymer (EVA flame retarded with aluminum tri-hydroxide (ATH. These properties were measured for the various species identified across the decomposition of the material. Namely, the thermal conductivity was found to decrease as a function of temperature before decomposition whereas the ceramic residue obtained after the decomposition at the steady state exhibits a thermal conductivity as low as 0.2 W/m/K. The heat capacity of the material was also investigated using both isothermal modulated Differential Scanning Calorimetry (DSC and the standard method (ASTM E1269. It was shown that the final residue exhibits a similar behavior to alumina, which is consistent with the decomposition pathway of EVA/ATH. Besides, the two experimental approaches give similar results over the whole range of temperatures. Moreover, the optical properties before decomposition and the heat capacity of the decomposition gases were also analyzed. Those properties were then used as input data for a pyrolysis model in order to predict gasification experiments. Mass losses of gasification experiments were well predicted, thus validating the characterization of the thermo-physical properties of the material.

Characterization of Thermo-Physical Properties of EVA/ATH: Application to Gasification Experiments and Pyrolysis Modeling.

Science.gov (United States)

Girardin, Bertrand; Fontaine, Gaëlle; Duquesne, Sophie; Försth, Michael; Bourbigot, Serge

2015-11-20

The pyrolysis of solid polymeric materials is a complex process that involves both chemical and physical phenomena such as phase transitions, chemical reactions, heat transfer, and mass transport of gaseous components. For modeling purposes, it is important to characterize and to quantify the properties driving those phenomena, especially in the case of flame-retarded materials. In this study, protocols have been developed to characterize the thermal conductivity and the heat capacity of an ethylene-vinyl acetate copolymer (EVA) flame retarded with aluminum tri-hydroxide (ATH). These properties were measured for the various species identified across the decomposition of the material. Namely, the thermal conductivity was found to decrease as a function of temperature before decomposition whereas the ceramic residue obtained after the decomposition at the steady state exhibits a thermal conductivity as low as 0.2 W/m/K. The heat capacity of the material was also investigated using both isothermal modulated Differential Scanning Calorimetry (DSC) and the standard method (ASTM E1269). It was shown that the final residue exhibits a similar behavior to alumina, which is consistent with the decomposition pathway of EVA/ATH. Besides, the two experimental approaches give similar results over the whole range of temperatures. Moreover, the optical properties before decomposition and the heat capacity of the decomposition gases were also analyzed. Those properties were then used as input data for a pyrolysis model in order to predict gasification experiments. Mass losses of gasification experiments were well predicted, thus validating the characterization of the thermo-physical properties of the material.

EVA GREEN REAL-TIME PCR USED TO DETECT CELERY AS AN ALLERGEN IN FOOD

Directory of Open Access Journals (Sweden)

Ondrej Škultéty

2011-04-01

Full Text Available EvaGreen®  Real-Time PCR method has been used for celery(Apium graveolens allergen detection. A primer designed in mannitol dehydrogenase gene region has been used for specific celery identification in sample. The results show possibility to create calibration curve using artificially adulterated samples. The increasing variability between parallel calibration of celery samples has been observed from 0.1 % to 100%. Detection limit has been set to value 0.1% in celery representing 1000 ppm. Fluorescent signal has been presented even in samples with lower percentage addition of celery but these samples have been excluded according to unspecific melting curve.doi:10.5219/138

New instruments for soil physics class: Improving the laboratory and field seminars

Science.gov (United States)

Klipa, Vladimir; Jankovec, Jakub; Snehota, Michal

2014-05-01

Teaching soil science and soil physics is an important part of the curriculum of many programs with focus on technical and natural sciences. Courses of soil science and namely soil physics have a long tradition at the faculty of Civil Engineering of the Czech Technical University in Prague. Students receive the theoretical foundations about soil classification, soil physics, soil chemistry and soil hydraulic characteristics in the course. In practical seminars students perform measurements of physical, hydraulic and chemical characteristics of soils, thus a comprehensive survey of soil is done in the given site. So far, students had the opportunity to use old, manually operated instrumentation. The project aims to improve the attractiveness of soil physics course and to extend the practical skills of students by introducing new tasks and by involving modern automated equipment. New instruments were purchased with the support of the Ministry of Education, Youth and Sports of the Czech Republic under the project FRVS No. 1162/2013 G1. Specifically, two tensiometers T8 with multi-functional handheld read-out unit (UMS, GmbH) and manual Mini Disk Infiltrometer (Decagon Devices, Inc.) were purchased and incorporated into the course. In addition, newly designed MultiDisk the automated mini disk Infiltrometer (CTU in Prague) and combined temperature and soil moisture TDT sensor TMS 2 (TOMST®, s.r.o.), were made freely available for soil physics classes and included into the courses. Online tutorials and instructional videos were developed. Detailed multimedia teaching materials were introduced so that students are able to work more independently. Students will practice operating the digital tensiometer T8 with integrated temperature sensor and manual Mini Disk Infiltrometer (diameter disk: 4.4 cm, suction range: 0.5 to 7.0 cm of suction) and MultiDisk the automated mini disk Infiltrometer (see Klipa et al., EGU2014-7230) and combined temperature and soil moisture TDT

On-line Monitoring of Instrumentation in Research Reactors

International Nuclear Information System (INIS)

2017-12-01

This publication is the result of a benchmarking effort undertaken under the IAEA coordinated research project on improved instrumentation and control (I&C) maintenance techniques for research reactors. It lays the foundation for implementation of on-line monitoring (OLM) techniques and establishment of the validity of those for improved maintenance practices in research reactors for a number of applications such as change to condition based calibration, performance monitoring of process instrumentation systems, detection of process anomalies and to distinguish between process problems/effects and instrumentation/sensor issues. The techniques and guidance embodied in this publication will serve the research reactor community in providing the technical foundation for implementation of OLM techniques. It is intended to be used by Member States to implement I&C maintenance and to improve performance of research reactors.

A toolbox for safety instrumented system evaluation based on improved continuous-time Markov chain

Science.gov (United States)

Wardana, Awang N. I.; Kurniady, Rahman; Pambudi, Galih; Purnama, Jaka; Suryopratomo, Kutut

2017-08-01

Safety instrumented system (SIS) is designed to restore a plant into a safe condition when pre-hazardous event is occur. It has a vital role especially in process industries. A SIS shall be meet with safety requirement specifications. To confirm it, SIS shall be evaluated. Typically, the evaluation is calculated by hand. This paper presents a toolbox for SIS evaluation. It is developed based on improved continuous-time Markov chain. The toolbox supports to detailed approach of evaluation. This paper also illustrates an industrial application of the toolbox to evaluate arch burner safety system of primary reformer. The results of the case study demonstrates that the toolbox can be used to evaluate industrial SIS in detail and to plan the maintenance strategy.

Current capabilities of transient two-phase flow instruments

International Nuclear Information System (INIS)

Solbrig, C.W.; Kondic, N.N.

1979-01-01

The measurement of two phase flow phenomena in transient conditions representative of a Loss-of-Coolant Accident requires the use of sophisticated instruments and the further development of other instruments. Measurements made in large size pipes are often flow regime dependent. The flow regimes encountered depend upon the system geometry, transient effects, heat transfer, etc. The geometries in which these measurements must be made, the instruments which are currently used, new instruments being developed, the facilities used to calibrate these instruments, and the improvements which must be made to measurement capabilities are described

A framework for assessing Health Economic Evaluation (HEE) quality appraisal instruments.

Science.gov (United States)

Langer, Astrid

2012-08-16

Health economic evaluations support the health care decision-making process by providing information on costs and consequences of health interventions. The quality of such studies is assessed by health economic evaluation (HEE) quality appraisal instruments. At present, there is no instrument for measuring and improving the quality of such HEE quality appraisal instruments. Therefore, the objectives of this study are to establish a framework for assessing the quality of HEE quality appraisal instruments to support and improve their quality, and to apply this framework to those HEE quality appraisal instruments which have been subject to more scrutiny than others, in order to test the framework and to demonstrate the shortcomings of existing HEE quality appraisal instruments. To develop the quality assessment framework for HEE quality appraisal instruments, the experiences of using appraisal tools for clinical guidelines are used. Based on a deductive iterative process, clinical guideline appraisal instruments identified through literature search are reviewed, consolidated, and adapted to produce the final quality assessment framework for HEE quality appraisal instruments. The final quality assessment framework for HEE quality appraisal instruments consists of 36 items organized within 7 dimensions, each of which captures a specific domain of quality. Applying the quality assessment framework to four existing HEE quality appraisal instruments, it is found that these four quality appraisal instruments are of variable quality. The framework described in this study should be regarded as a starting point for appraising the quality of HEE quality appraisal instruments. This framework can be used by HEE quality appraisal instrument producers to support and improve the quality and acceptance of existing and future HEE quality appraisal instruments. By applying this framework, users of HEE quality appraisal instruments can become aware of methodological deficiencies

Imaginario femenino en el populismo argentino. Género y nación en La razón de mi vida, de Eva Perón

Directory of Open Access Journals (Sweden)

Susana Rosano

2014-06-01

Full Text Available En La razón de mi vida, Eva Perón ayuda a construir una imagen de sí misma profundamente atravesada por estrategias de representación melodramáticas. En contraste con la mayoría de las autobiografías femeninas o masculinas, no se trata aquí de un recuento introspectivo. Eva no relata su vida desde el comienzo, desde su infancia. No aprovecha la oportunidad para echar luz sobre las zonas oscuras de su biografía ni para aclarar ninguna de las acusaciones a las que sus reconocidos “supercríticos” la tenían acostumbrada. Se trata, por lo tanto, de una autobiografía sui generis, descentrada, híbrida: el relato de los años de lucha política junto a Perón. De esta manera, Eva se inscribe en el discurso político con una estrategia absolutamente inusual para el género. Su participación en la arena pública está registrada desde un desvío: su lucha es una historia de amor múltiple, con Perón y con “el pueblo”. El objetivo de este trabajo es analizar las tecnologías autobiográficas utilizadas en el texto en relación con los discursos de verdad e identidad femenina disponibles en la época en que fue escrito, la década del 50 en Argentina.

ACRF Instrumentation Status: New, Current, and Future November-December 2006

Energy Technology Data Exchange (ETDEWEB)

JC Liljegren

2006-12-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Program Climate Research Facility instrumentation status. The report is divided into four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

Nuclear reactor instrumentation

International Nuclear Information System (INIS)

Duncombe, E.; McGonigal, G.

1976-01-01

Reference is made to the instrumentation of liquid metal cooled fast reactors. In order to ensure the safe operation of such reactors it is necessary to constantly monitor the coolant flowing through the fuel assemblies for temperature and rate of flow, requiring a large number of sensors. An improved and simplified arrangement is claimed in which the fuel assemblies feed a fraction of coolant to three instrument units arranged to sense the temperature and rate of flow of samples of coolant. Each instrument unit comprises a sleeve housing a sensing unit and has a number of inlet ducts arranged for receiving coolant from a fuel assembly together with a single outlet. The sensing unit has three thermocouple hot junctions connected in series, the hot junctions and inlet ducts being arranged in pairs. Electromagnetic windings around an inductive core are arranged to sense variation in flow of liquid metal by flux distortion. Fission product sensing means may also be provided. Full constructional details are given. (U.K.)

The balanced scorecard as a potential instrument for supporting planning and improvement in accounting education: Comparative survey findings

Directory of Open Access Journals (Sweden)

CJ Cronje

2004-04-01

Full Text Available This paper is firstly a comparison of the components of a potential balanced scorecard for accounting departments of universities in South Africa and Australia. Secondly, the various suggested measurement criteria of the balanced scorecard components are also compared. The findings of the research paper indicate no significant differences. The conclusion is that the balanced scorecard constitutes a potential instrument for supporting the planning and improvement of the accounting education environment.

Quem está ficando para trás? Uma Década de Evasão nos Cursos Brasileiros de Graduação em Administração de Empresas e Ciências Contábeis

Directory of Open Access Journals (Sweden)

Jacqueline Veneroso Alves da Cunha

2015-01-01

Full Text Available A evasão em Instituições de Ensino Superior (IES públicas e privadas está associada com perdas sociais, acadêmicas e econômicas consideráveis. Essas perdas afetam toda a sociedade, já que os cidadãos pagam, direta ou indiretamente, pela sua própria educação e a dos seus familiares. O principal objetivo deste estudo foi analisar o comportamento de evasão dos estudantes matriculados nos cursos de graduação em Administração de Empresas e Ciências Contábeis em IES brasileiras entre 2001 e 2010. As taxas de evasão foram pesquisadas por tipo de IES e correlacionadas com o percentual de estudantes que concluíram os seus cursos dentro do prazo ideal. As hipóteses foram testadas com o teste ANOVA, e as variáveis foram submetidas à análise de correspondência simples e múltipla. As estatísticas descritivas mostraram níveis mais altos de evasão nos cursos de Administração de Empresas do que em Ciências Contábeis, porém em níveis gerais mais baixos quando comparados com a literatura. O índice de prazo ideal de conclusão do curso foi maior para Ciências Contábeis, embora não significativamente. Menos de um quarto dos estudantes concluíram os seus cursos dentro do período esperado de cinco anos. Em geral, as conclusões indicam que os cursos de Ciências Contábeis têm taxas menores de evasão nas universidades e nos centros universitários, enquanto os cursos de Administração de Empresas têm taxas maiores de evasão nas faculdades, escolas, institutos e centros de ensino tecnológico. Os resultados deste estudo não pretendem ser uma generalização, mas representam padrões observados dentro das classificações adotadas no estudo.

Using Mixed-Modality Learning Strategies via e-Learning for Second Language Vocabulary Acquisition

Science.gov (United States)

Yang, Fang-Chuan Ou; Wu, Wen-Chi Vivian

2015-01-01

This study demonstrated an e-learning system, MyEVA, based on a mixed-modality vocabulary strategy in assisting learners of English as a second language (L2 learners) to improve their vocabulary. To explore the learning effectiveness of MyEVA, the study compared four vocabulary-learning techniques, MyEVA in preference mode, MyEVA in basic mode, an…

LOFT instrumented fuel design and operating experience

International Nuclear Information System (INIS)

Russell, M.L.

1979-01-01

A summary description of the Loss-of-Fluid Test (LOFT) system instrumented core construction details and operating experience through reactor startup and loss-of-coolant experiment (LOCE) operations performed to date are discussed. The discussion includes details of the test instrumentation attachment to the fuel assembly, the structural response of the fuel modules to the forces generated by a double-ended break of a pressurized water reactor (PWR) coolant pipe at the inlet to the reactor vessel, the durability of the LOFT fuel and test instrumentation, and the plans for incorporation of improved fuel assembly test instrumentation features in the LOFT core

ARM Climate Research Facility Instrumentation Status and Information October 2009

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2009-10-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ARM Climate Research Facility Instrumentation Status and Information April 2010

Energy Technology Data Exchange (ETDEWEB)

Voyles, JW

2010-05-15

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ARM Climate Research Facility Instrumentation Status and Information January 2010

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2010-02-28

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ARM Climate Research Facility Instrumentation Status and Information March 2010

Energy Technology Data Exchange (ETDEWEB)

Voyles, JW

2010-04-19

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ARM Climate Research Facility Instrumentation Status and Information February 2010

Energy Technology Data Exchange (ETDEWEB)

Voyles, JW

2010-03-25

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

ARM Climate Research Facility Instrumentation Status and Information December 2009

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2010-12-30

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following five sections: (1) new instrumentation in the process of being acquired and deployed, (2) field campaigns, (3) existing instrumentation and progress on improvements or upgrades, (4) proposed future instrumentation, and (5) Small Business Innovation Research instrument development.

Assessment of physical protection systems: EVA method

International Nuclear Information System (INIS)

Bernard, J.-L.; Lamotte, C.; Jorda, A.

2001-01-01

CEA's missions in various sectors of activity such as nuclear, defence, industrial contracts and the associated regulatory requirements, make it necessary to develop a strategy in the field of physical protection. In particular, firms having nuclear materials are subject to the July 25, 1980 law no.80-572 on the protection and control of nuclear materials. A holding permit delivered by the regulatory authority is conditioned to the protection by the operator of the nuclear materials used. In France it is the nuclear operator who must demonstrate, in the form of a security study, that potential aggressors would be neutralised before they could escape with the material. To meet these requirements, we have developed methods to assess the vulnerability of our facilities. The EVA method, the French acronym for 'Evaluation de la vulnerabilite des Acces' (access vulnerability system) allows dealing with internal and external threats involving brutal actions. In scenarios relating to external threat, the intruders get past the various barriers of our protection system, attempting to steal a large volume of material in one swoop and then escape. In the case of internal threat, the goal is the same. However, as the intruder usually has access to the material in the scope of his activities, the action begins at the level of the target. Our protection system is based on in-depth defense where the intruders are detected and then delayed in their advance towards their target to allow time for intervention forces to intercept them

Instrumentation development

International Nuclear Information System (INIS)

Anon.

1976-01-01

Areas being investigated for instrumentation improvement during low-level pollution monitoring include laser opto-acoustic spectroscopy, x-ray fluorescence spectroscopy, optical fluorescence spectroscopy, liquid crystal gas detectors, advanced forms of atomic absorption spectroscopy, electro-analytical chemistry, and mass spectroscopy. Emphasis is also directed toward development of physical methods, as opposed to conventional chemical analysis techniques for monitoring these trace amounts of pollution related to energy development and utilization

Uso de agregado leve de EVA em contrapiso argamassado para isolamento ao ruído de impacto em edificações residenciais

Directory of Open Access Journals (Sweden)

Bernardo Fonseca Tutikian

Full Text Available Resumo O copolímero etileno acetato de vinila (EVA é largamente utilizado na indústria calçadista. Entretanto, a geração de resíduos no processo de fabricação é bastante significativa. Com a implementação da norma de desempenho, NBR 15575, os projetos de construções habitacionais devem atender aos níveis de desempenho exigidos. Dentre os requisitos prescritos pela norma está a isolação ao ruído de impacto entre pisos, a qual pode ser otimizada com a utilização de materiais de baixa massa específica. Nesse contexto, este artigo visa desenvolver uma argamassa leve, a partir da incorporação de EVA proveniente da indústria calçadista, a ser utilizada como contrapiso para isolamento acústico. Para tanto, fez-se um estudo por meio de ensaios de resistência à compressão e à tração, bem como nível de pressão sonora de impacto padronizado ponderado, realizado em câmara normatizada. Foram desenvolvidos cinco traços, com proporções de 20%, 40%, 60%, 80% e 100% de substituição da agregado miúdo por EVA, além do contrapiso convencional. Foram moldadas placas de 1 m2 de contrapiso leve, e uma amostra representativa do tamanho da laje com 16 m2, as quais diferiram em 2 dB para o isolamento acústico. O traço com melhor desempenho proporcionou uma redução de 9 dB em relação ao contrapiso convencional, mostrando ser eficaz para utilização como isolante acústico.

How does Architecture Sound for Different Musical Instrument Performances?

DEFF Research Database (Denmark)

Saher, Konca; Rindel, Jens Holger

2006-01-01

This paper discusses how consideration of sound _in particular a specific musical instrument_ impacts the design of a room. Properly designed architectural acoustics is fundamental to improve the listening experience of an instrument in rooms in a conservatory. Six discrete instruments (violin, c...... different instruments and the choir experience that could fit into same category of room. For all calculations and the auralizations, a computational model is used: ODEON 7.0....

A novel intumescent flame retardant-functionalized graphene: Nanocomposite synthesis, characterization, and flammability properties

International Nuclear Information System (INIS)

Huang, Guobo; Chen, Suqing; Tang, Shouwan; Gao, Jianrong

2012-01-01

An intumescent flame retardant, poly(piperazine spirocyclic pentaerythritol bisphosphonate) (PPSPB), has been covalently grafted onto the surfaces of graphene oxide (GO) to obtain GO–PPSPB and according nanocomposites were prepared via solvent blending. The X-ray diffraction (XRD) and transmission electron microscopy (TEM) results show that the chemically reduced GO–PPSPB (CRG–PPSPB) can achieve better dispersion in the ethylene vinyl acetate copolymer (EVA) matrix and exfoliated EVA/CRG–PPSPB nanocomposites are formed. The results from thermogravimetric analysis (TGA) and cone calorimeter tests indicate that CRG–PPSPB improve thermal stability and reduce obviously the flammability (including peak heat release rate (PHRR), total heat release (THR), average mass loss rate (AMLR), etc.) of EVA. Compared with pure EVA resin, the PHRR of the EVA/CRG–PPSPB nanocomposites filled with 1 wt% CRG–PPSPB is reduced by about 56%. The SEM images show that a compact, dense and uniform intumescent char is formed for EVA/CRG–PPSPB nanocomposites after combustion. The functionalization of graphene by intumescent flame retardant PPSPB can improve both the dispersion of graphene sheets in the polymer matrix and flame retardancy of the nanocomposites. -- Highlights: ► Graphene oxide were modified with intumescent flame retardant PPSPB. ► EVA/CRG–PPSPB nanocomposites were prepared via solvent blending. ► CRG–PPSPB improved the flame retardancy of EVA nanocomposites.

INSTRUMENTAL PROVISION OF INDICATIVE MANAGEMENT FOOD INDUSTRY AND ITS IMPROVEMENT

Directory of Open Access Journals (Sweden)

N. V. Sirotkina

2013-01-01

Full Text Available The article is devoted to instruments of indicative management of industrial enterprises, which represent a means of making objective and operational administration solutions, theoretical research, as well as the implementation of management actions on the basis of the analytical and forecasting estimates management indicator.

Compósitos à base de gesso com resíduos de EVA e vermiculita

OpenAIRE

Oliveira,Marilia P. de; Barbosa,Normando P.; Torres,Sandro M.; Leal,Antonio F.; Silva,Cibelle G.

2012-01-01

O gesso é um dos materiais de construção mais antigos de que se tem conhecimento. Algumas de suas propriedades lhes conferem vantagens, tais como resistência ao fogo e isolamentos térmico e acústico. Objetivou-se, com este trabalho, avaliar as propriedades físico-mecânicas de compósitos à base de gesso com a incorporação de resíduos da indústria de calçados, o etileno acetato de vinila (EVA) e a vermiculita. O desenvolvimento desses compósitos tem como propósito a produção de elementos de rev...

Previous geological exploration of antimony ore occurrences Krčeva Reka (eastern Serbia in terms of the potentiality of the epithermal gold

Directory of Open Access Journals (Sweden)

Vukas Radoslav B.

2014-01-01

Full Text Available This paper presents the results of a previous geological exploration of antimony ore occurrences in the area Krčeva river. Data analysis of geological, geophysical, geochemical prospecting and appropriate methods of laboratory testing identified a series of similarities to epithermal gold mineralization Carline type and formed a preliminary model of its creation.

Development of quality control and instrumentation performance metrics for diffuse optical spectroscopic imaging instruments in the multi-center clinical environment

Science.gov (United States)

Keene, Samuel T.; Cerussi, Albert E.; Warren, Robert V.; Hill, Brian; Roblyer, Darren; Leproux, AnaÑ--s.; Durkin, Amanda F.; O'Sullivan, Thomas D.; Haghany, Hosain; Mantulin, William W.; Tromberg, Bruce J.

2013-03-01

Instrument equivalence and quality control are critical elements of multi-center clinical trials. We currently have five identical Diffuse Optical Spectroscopic Imaging (DOSI) instruments enrolled in the American College of Radiology Imaging Network (ACRIN, #6691) trial located at five academic clinical research sites in the US. The goal of the study is to predict the response of breast tumors to neoadjuvant chemotherapy in 60 patients. In order to reliably compare DOSI measurements across different instruments, operators and sites, we must be confident that the data quality is comparable. We require objective and reliable methods for identifying, correcting, and rejecting low quality data. To achieve this goal, we developed and tested an automated quality control algorithm that rejects data points below the instrument noise floor, improves tissue optical property recovery, and outputs a detailed data quality report. Using a new protocol for obtaining dark-noise data, we applied the algorithm to ACRIN patient data and successfully improved the quality of recovered physiological data in some cases.

Validation of the Long- and Short-Form of the Ethical Values Assessment (EVA): A Questionnaire Measuring the Three Ethics Approach to Moral Psychology

Science.gov (United States)

Padilla-Walker, Laura Maria; Jensen, Lene Arnett

2016-01-01

Moral psychology has been moving toward consideration of multiple kinds of moral concepts and values, such as the Ethics of Autonomy, Community, and Divinity. While these three ethics have commonly been measured qualitatively, the current study sought to validate the long and short forms of the Ethical Values Assessment (EVA), which is a…

Instrumentalization of eating improves weight loss maintenance in obesity

DEFF Research Database (Denmark)

Christensen, Bodil Just; Iepsen, Eva Pers Winning; Lundgren, Julie Rehné

2017-01-01

Aim: The purpose of this study was to identify psychosocial determinants for maintaining weight loss. Methods: 42 obese individuals who achieved a 12% weight loss before entering a 52-week weight maintenance program were interviewed qualitatively. Psychosocial factors related to weight loss...... weight loss maintenance was associated with an interplay between behavioral, affective and contextual changes. ‘Instrumentalization of eating behavior' seems to be an important element in long-term weight maintenance....

Review: Thomas Bierschenk and Eva Spies (eds, 50 Jahre Unabhängigkeit in Afrika: Kontinuitäten, Brüche, Perspektiven (2012

Directory of Open Access Journals (Sweden)

Geert Castryck

2015-01-01

Full Text Available Review of the edited volume: Thomas Bierschenk and Eva Spies (eds, 50 Jahre Unabhängigkeit in Afrika: Kontinuitäten, Brüche, Perspektiven, Cologne: Rüdiger Köppe Verlag, 2012, ISBN 9783896458292, 572 pages

Advanced optical instruments technology

Science.gov (United States)

Shao, Mike; Chrisp, Michael; Cheng, Li-Jen; Eng, Sverre; Glavich, Thomas; Goad, Larry; Jones, Bill; Kaarat, Philip; Nein, Max; Robinson, William

1992-08-01

The science objectives for proposed NASA missions for the next decades push the state of the art in sensitivity and spatial resolution over a wide range of wavelengths, including the x-ray to the submillimeter. While some of the proposed missions are larger and more sensitive versions of familiar concepts, such as the next generation space telescope, others use concepts, common on the Earth, but new to space, such as optical interferometry, in order to provide spatial resolutions impossible with other concepts. However, despite their architecture, the performance of all of the proposed missions depends critically on the back-end instruments that process the collected energy to produce scientifically interesting outputs. The Advanced Optical Instruments Technology panel was chartered with defining technology development plans that would best improve optical instrument performance for future astrophysics missions. At this workshop the optical instrument was defined as the set of optical components that reimage the light from the telescope onto the detectors to provide information about the spatial, spectral, and polarization properties of the light. This definition was used to distinguish the optical instrument technology issues from those associated with the telescope, which were covered by a separate panel. The panel identified several areas for optical component technology development: diffraction gratings; tunable filters; interferometric beam combiners; optical materials; and fiber optics. The panel also determined that stray light suppression instruments, such as coronagraphs and nulling interferometers, were in need of general development to support future astrophysics needs.

Adding delayed recall to the ADAS-cog improves measurement precision in mild Alzheimer's disease: Implications for predicting instrumental activities of daily living.

Science.gov (United States)

Lowe, Deborah A; Balsis, Steve; Benge, Jared F; Doody, Rachelle S

2015-12-01

As research increasingly focuses on preclinical stages of Alzheimer's disease (AD), instruments must be retooled to identify early cognitive markers of AD. A supplemental delayed recall subtest for the Alzheimer's Disease Assessment Scale-cognitive (ADAS-cog; Mohs, Rosen, & Davis, 1983; Rosen, Mohs, & Davis, 1984) is commonly implemented, but it is not known precisely where along the spectrum of cognitive dysfunction this subtest yields incremental information beyond what is gained from the standard ADAS-cog, or whether it can improve prediction of functional outcomes. An item response theory approach can analyze this in a psychometrically rigorous way. Seven hundred eighty-eight patients with AD or amnestic complaints or impairment completed a battery including the ADAS-cog and 2 activities of daily living measures. The delayed recall subtest slightly improved the ADAS-cog's measurement precision in the mild range of cognitive dysfunction and increased prediction of instrumental activities of daily living for individuals with subjective memory impairment. (c) 2015 APA, all rights reserved).

Hernández Socorro, María de los Reyes: Construcciones de Eva

Directory of Open Access Journals (Sweden)

José Javier Azanza López

2015-01-01

Full Text Available Resulta difícil resistirse a morder la apetitosa manzana que nos ofrece la inocente a la vez que seductora Eva (1914, Colección Montesdeoca García-Sáenz, Las Palmas de Gran Canaria del pintor tarraconense Julio Moisés y Fernández de Villasante, imagen icónica de la no menos tentadora propuesta concebida por María de los Reyes Hernández Socorro, catedrática de Historia del Arte de la Universidad de Las Palmas de Gran Canaria, que plantea las diversas interpretaciones de algo más de medio centenar de artistas (veinticinco creadoras femeninas y veintisiete creadores masculinos del ámbito canario sobre sus respectivas madres, en el marco cronológico comprendido entre 1846 y 2013.

ACRF Instrumentation Status: New, Current, and Future - November – December 2007

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2007-12-01

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

ACRF Instrumentation Status: New, Current, and Future - October – November 2007

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2007-11-30

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement (ARM) Climate Research Facility (ACRF) instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) SBIR instrument development.

How to improve a critical performance for an ExoMars 2020 Scientific Instrument (RLS). Raman Laser Spectrometer Signal to Noise Ratio (SNR) Optimization

Science.gov (United States)

Canora, C. P.; Moral, A. G.; Rull, F.; Maurice, S.; Hutchinson, I.; Ramos, G.; López-Reyes, G.; Belenguer, T.; Canchal, R.; Prieto, J. A. R.; Rodriguez, P.; Santamaria, P.; Berrocal, A.; Colombo, M.; Gallago, P.; Seoane, L.; Quintana, C.; Ibarmia, S.; Zafra, J.; Saiz, J.; Santiago, A.; Marin, A.; Gordillo, C.; Escribano, D.; Sanz-Palominoa, M.

2017-09-01

The Raman Laser Spectrometer (RLS) is one of the Pasteur Payload instruments, within the ESA's Aurora Exploration Programme, ExoMars mission. Raman spectroscopy is based on the analysis of spectral fingerprints due to the inelastic scattering of light when interacting with matter. RLS is composed by Units: SPU (Spectrometer Unit), iOH (Internal Optical Head), and ICEU (Instrument Control and Excitation Unit) and the harnesses (EH and OH). The iOH focuses the excitation laser on the samples and collects the Raman emission from the sample via SPU (CCD) and the video data (analog) is received, digitalizing it and transmiting it to the processor module (ICEU). The main sources of noise arise from the sample, the background, and the instrument (Laser, CCD, focuss, acquisition parameters, operation control). In this last case the sources are mainly perturbations from the optics, dark signal and readout noise. Also flicker noise arising from laser emission fluctuations can be considered as instrument noise. In order to evaluate the SNR of a Raman instrument in a practical manner it is useful to perform end-to-end measurements on given standards samples. These measurements have to be compared with radiometric simulations using Raman efficiency values from literature and taking into account the different instrumental contributions to the SNR. The RLS EQM instrument performances results and its functionalities have been demonstrated in accordance with the science expectations. The Instrument obtained SNR performances in the RLS EQM will be compared experimentally and via analysis, with the Instrument Radiometric Model tool. The characterization process for SNR optimization is still on going. The operational parameters and RLS algorithms (fluorescence removal and acquisition parameters estimation) will be improved in future models (EQM-2) until FM Model delivery.

EVA Glove Sensor Feasbility II Abstract

Science.gov (United States)

Melone, Kate

2014-01-01

The main objectives for the glove project include taking various measurements from human subjects during and after they perform different tasks in the glove box, acquiring data from these tests and determining the accuracy of these results, interpreting and analyzing this data, and using the data to better understand how hand injuries are caused during EVAs.1 Some of these measurements include force readings, temperature readings, and micro-circulatory blood flow.1 The three glove conditions tested were ungloved (a comfort glove was worn to house the sensors), Series 4000, and Phase VI. The general approach/procedure for the glove sensor feasibility project is as follows: 1. Prepare test subject for testing. This includes attaching numerous sensors (approximately 50) to the test subject, wiring, and weaving the sensors and wires in the glove which helps to keep everything together. This also includes recording baseline moisture data using the Vapometer and MoistSense. 2. Pressurizing the glove box. Once the glove box is pressurized to the desired pressure (4.3 psid), testing can begin. 3. Testing. The test subject will perform a series of tests, some of which include pinching a load cell, making a fist, pushing down on a force plate, and picking up metal pegs, rotating them 90 degrees, and placing them back in the peg board. 4. Post glove box testing data collection. After the data is collected from inside the glove box, the Vapometer and MoistSense device will be used to collect moisture data from the subject's hand. 5. Survey. At the conclusion of testing, he/she will complete a survey that asks questions pertaining to comfort/discomfort levels of the glove, glove sizing, as well as offering any additional feedback.

Flow karyotyping and flow instrumentation development. Final report

Energy Technology Data Exchange (ETDEWEB)

GEngh, G.J. van den

1997-11-01

The project had three major aims: improvement of technology for high-speed cell and chromosome sorting; the use of such instrumentation in genome analysis; applying the principles developed and the lessons learned to automated processes for the genome program. The work was a continuation of studies that were started at the Lawrence Livermore National Laboratory before the PI moved to the University of Washington. At Livermore, a high-speed sorter for the selection of human chromosomes was built. The instrument incorporated Livermore`s advanced sorter technology. The engineering focused on improving robustness and reliability so that the full potential of high-speed sorting would become available to the biological research laboratory. The new instrument, dubbed MoFlo for modular flow cytometer, proved to be a very practical and efficient tool during the chromosome isolation phase of the gene-library project. Its reliability and ease of operation exceeded that of the commercial instruments. The technology was licensed to two companies.

The role of the restructured Mobile Remote Service Base System (MBS) in support of Space Station maintenance and servicing

Science.gov (United States)

Darlington, T.; Krukewich, K.

1992-08-01

The critical parameters resulting from the restructuring of Space Station Freedom which necessitated the redesign of the Mobile Remote Service Base System (MBS) are described. These include optimization of robotic attachment locations for access to the Space Station truss-mounted orbital replacement units, transport of logistics carriers to the maintenance sites, minimization of EVA overhead associated with maintenance, self-maintenance of other mobile servicing system (MSS) elements on the MBS, and balancing of station EVA and extravehicular robotics in a complementary fashion to minimize maintenance overhead in general. Consideration is given to the configuration of the resulting MBS, which provides the program with maximum flexibility to utilize the assets of the MSS and optimizes end-to-end maintenance with regard to the use of station resources such as crew time and power. Maintenance and servicing scenarios which are instrumental to the reconfigured MBS as well as the results of improved maintenance capability are presented.

Neutron scattering instrumentation. A guide to future directions

International Nuclear Information System (INIS)

Crawford, R.K.

2001-01-01

Many of the neutron scattering instruments being designed or built now are the first generation of pulsed source instruments to provide nearly optimal scattering angle coverage with good spatial resolution in a single setting of the instrument while making full use of modern optics to maximize the useful flux on the sample. Spectacular gains have resulted from such optimization, but in most of these cases there is little room for further large improvements. However, other types of pulsed source instruments are currently less well optimized, and there is room for significant improvements in these types of pulsed source instruments. Several examples will illustrate these points. In the longer term, we can expect source strengths to continue to increase, but only slowly. However, we can expect new science and new ways of doing experiments to emerge. Many of these changes will be driven by enhancements in sample environment capabilities leading to more innovative sample conditions and to efficient parametric studies. Kinetic studies and parametric studies will take on much greater roles with the high data rates now available. Implications of these trends will be discussed. (author)

Estudo de misturas asfálticas com ligante modificado pelo polímero EVA para pavimentos urbanos de Manaus - AM Study of asphalt mixtures containing a binder modified with EVA polymer for use in urban pavements in Manaus

OpenAIRE

Daniela M. G. D'Antona; Consuelo A. Da Frota

2011-01-01

A presente pesquisa buscou soluções com materiais alternativos visando à construção de pavimentos urbanos para Manaus (AM) com maior vida útil e condizente com as suas condições de serviço, em particular, o seu desempenho mecânico frente às temperaturas regionais. Estudou-se o ligante regional, CAP 50/70, misturado com 4% do polímero EVA, e como partícipe em compósitos asfálticos. A incorporação do mencionado polímero teve como objetivo melhorar suas propriedades reológicas e, por conseguinte...

A New Automated Instrument Calibration Facility at the Savannah River Site

International Nuclear Information System (INIS)

Polz, E.; Rushton, R.O.; Wilkie, W.H.; Hancock, R.C.

1998-01-01

The Health Physics Instrument Calibration Facility at the Savannah River Site in Aiken, SC was expressly designed and built to calibrate portable radiation survey instruments. The facility incorporates recent advances in automation technology, building layout and construction, and computer software to improve the calibration process. Nine new calibration systems automate instrument calibration and data collection. The building is laid out so that instruments are moved from one area to another in a logical, efficient manner. New software and hardware integrate all functions such as shipping/receiving, work flow, calibration, testing, and report generation. Benefits include a streamlined and integrated program, improved efficiency, reduced errors, and better accuracy

The Effect of Femoral Cutting Guide Design Improvements for Patient-Specific Instruments

Directory of Open Access Journals (Sweden)

Oh-Ryong Kwon

2015-01-01

Full Text Available Although the application of patient-specific instruments (PSI for total knee arthroplasty (TKA increases the cost of the surgical procedure, PSI may reduce operative time and improve implant alignment, which could reduce the number of revision surgeries. We report our experience with TKA using PSI techniques in 120 patients from March to December 2014. PSI for TKA were created from data provided by computed tomography (CT scans or magnetic resonance imaging (MRI; which imaging technology is more reliable for the PSI technique remains unclear. In the first 20 patients, the accuracy of bone resection and PSI stability were compared between CT and MRI scans with presurgical results as a reference; MRI produced better results. In the second and third groups, each with 50 patients, the results of bone resection and stability were compared in MRI scans with respect to the quality of scanning due to motion artifacts and experienced know-how in PSI design, respectively. The optimized femoral cutting guide design for PSI showed the closest outcomes in bone resection and PSI stability with presurgical data. It is expected that this design could be a reasonable guideline in PSI.

Geração de riqueza em empresas vencedoras do PNQ: uma análise usando EVA

Directory of Open Access Journals (Sweden)

Heder Bassan

2016-03-01

Full Text Available Resumo Este artigo tem como objetivo analisar a geração de riqueza de empresas vencedoras do Prêmio Nacional da Qualidade (PNQ com uso do Valor Econômico Adicionado (EVA e comparar esse valor com o das demais empresas do mesmo setor da economia. A utilização do EVA como medida de desempenho é um diferencial deste trabalho em relação a outros estudos. Os dados foram coletados do banco de dados do sistema Economática, em sítios especializados em divulgação de demonstrações financeiras e nos sítios das empresas vencedoras do prêmio. O período de análise compreendeu os anos de 2000 a 2009. Foram utilizados testes paramétricos para validar as hipóteses de trabalho. Os resultados apontam para a existência de fortes indícios de que as empresas estudadas vencedoras do PNQ melhoraram o seu Valor Econômico Adicionado no período de pós-adoção do modelo do prêmio. Outro forte indício é que essas mesmas empresas possuem Valor Econômico Adicionado superior às demais do setor no período de pós-adoção do Modelo de Excelência em Gestão do PNQ. No entanto, isso não pode ser afirmado para o período de adoção do modelo do PNQ.

The quality of systematic reviews of health-related outcome measurement instruments.

Science.gov (United States)

Terwee, C B; Prinsen, C A C; Ricci Garotti, M G; Suman, A; de Vet, H C W; Mokkink, L B

2016-04-01

Systematic reviews of outcome measurement instruments are important tools for the selection of instruments for research and clinical practice. Our aim was to assess the quality of systematic reviews of health-related outcome measurement instruments and to determine whether the quality has improved since our previous study in 2007. A systematic literature search was performed in MEDLINE and EMBASE between July 1, 2013, and June 19, 2014. The quality of the reviews was rated using a study-specific checklist. A total of 102 reviews were included. In many reviews the search strategy was considered not comprehensive; in only 59 % of the reviews a search was performed in EMBASE and in about half of the reviews there was doubt about the comprehensiveness of the search terms used for type of measurement instruments and measurement properties. In 41 % of the reviews, compared to 30 % in our previous study, the methodological quality of the included studies was assessed. In 58 %, compared to 55 %, the quality of the included instruments was assessed. In 42 %, compared to 7 %, a data synthesis was performed in which the results from multiple studies on the same instrument were somehow combined. Despite a clear improvement in the quality of systematic reviews of outcome measurement instruments in comparison with our previous study in 2007, there is still room for improvement with regard to the search strategy, and especially the quality assessment of the included studies and the included instruments, and the data synthesis.

Mechanical properties of ProTaper Gold nickel-titanium rotary instruments.

Science.gov (United States)

Elnaghy, A M; Elsaka, S E

2016-11-01

To evaluate and compare the resistance to cyclic fatigue and torsional stress, flexibility and surface microhardness of ProTaper Gold (PTG; Dentsply, Tulsa Dental Specialties, Tulsa, OK, USA) system with ProTaper Universal (PTU; Dentsply Maillefer, Ballaigues, Switzerland). PTG and PTU instruments were rotated in simulated canals and the number of cycles to failure was recorded to assess their cyclic fatigue resistance. Torsional strength was measured using a torsiometer after fixing firmly the apical 3 mm of the instrument. A scanning electron microscope was used to characterize the topographic features of the fracture surfaces of the broken instruments. The instruments were tested for bending resistance using cantilever-bending test. Vickers microhardness was measured on the cross section of instruments with 300 g load and 15 s dwell time. Data were analysed statistically using independent t-tests. Statistical significance was set at P hand, PTU instruments were associated with higher resistance to torsional stress and microhardness than PTG instruments (P < 0.001). After torsional tests, the fractured cross-sectional surfaces revealed skewed dimples near the centre of the fracture surfaces and circular abrasion streaks. The PTG instrument had improved resistance to cyclic fatigue and flexibility compared with PTU. PTU instruments had improved resistance to torsional stress and microhardness compared with PTG. © 2015 International Endodontic Journal. Published by John Wiley & Sons Ltd.

A Pilot Model for the NASA Simplified Aid for EVA Rescue (SAFER) (Single-Axis Pitch Task)

Science.gov (United States)

Handley, Patrick Mark

This thesis defines, tests, and validates a descriptive pilot model for a single-axis pitch control task of the Simplified Aid for EVA Rescue (SAFER). SAFER is a small propulsive jetpack used by astronauts for self-rescue. Pilot model research supports development of improved self-rescue strategies and technologies through insights into pilot behavior.This thesis defines a multi-loop pilot model. The innermost loop controls the hand controller, the middle loop controls pitch rate, and the outer loop controls pitch angle. A human-in-the-loop simulation was conducted to gather data from a human pilot. Quantitative and qualitative metrics both indicate that the model is an acceptable fit to the human data. Fuel consumption was nearly identical; time to task completion matched very well. There is some evidence that the model responds faster to initial pitch rates than the human, artificially decreasing the model's time to task completion. This pilot model is descriptive, not predictive, of the human pilot. Insights are made into pilot behavior from this research. Symmetry implies that the human responds to positive and negative initial conditions with the same strategy. The human pilot appears indifferent to pitch angles within 0.5 deg, coasts at a constant pitch rate 1.09 deg/s, and has a reaction delay of 0.1 s.

Maintenance of nuclear medicine instruments in developing countries

International Nuclear Information System (INIS)

1976-01-01

This report reviews the current nature and severity of the problems related to nuclear medicine instruments in developing countries and gives the recommendations of the Advisory Group on the development of improved strategies to assure that the instruments are effectively maintained while in use. A compilation of data from the Register of Medical Radioisotope Units (IAEA-167) on medical radioisotope instrumentation installed in developing countries and some comments and suggestions contained in reports of Agency Technical Assistance Experts are also presented

Nonlinear internal friction, chaos, fractal and musical instruments

International Nuclear Information System (INIS)

Sun, Z.Q.; Lung, C.W.

1995-08-01

Nonlinear and structure sensitive internal friction phenomena in materials are used for characterizing musical instruments. It may be one of the most important factors influencing timbre of instruments. As a nonlinear dissipated system, chaos and fractals are fundamental peculiarities of sound spectra. It is shown that the concept of multi range fractals can be used to decompose the frequency spectra of melody. New approaches are suggested to improve the fabrication, property characterization and physical understanding of instruments. (author). 18 refs, 4 figs

Comparison between carbondioxide laser and cold instruments in treatment of vocal nodule

International Nuclear Information System (INIS)

Kundi, N.A.; Qayyum, A.; Ahmed, B.; Raza, M.

2013-01-01

Background: Vocal cord nodules are one of the most frequent disorders in both children and adults who use their voice excessively. Main symptom with which patient presents is hoarseness of voice. The treatment in early stages is voice therapy. Various methods are used for its treatment e.g. surgical removal with cold instruments and carbon dioxide laser ablation. Response to the treatment is measured by improvement in voice quality. Objective: To compare the results of Carbon dioxide laser and cold instruments in the treatment of vocal nodule. Study Design: Quasi-experimental study. Place and Duration of Study: This study was conducted at Otolaryngology Department Combined Military Hospital Rawalpindi. Patients and Methods: In this study 50 patients undergoing treatment of vocal cord nodule were included, 25 patients were treated by surgical removal with cold instruments and 25 patients were treated with carbon dioxide laser ablation. The main comparative outcomes were measured by patients' perception of voice quality (worse, same, improved) one week post operatively. Results: Improvement in voice quality with carbon dioxide laser was found to be clinically superior. Voice quality was significantly improved as compared to cold surgical instruments. Conclusion: Carbon dioxide laser causes early improvement in quality of voice as compared to cold instruments in the treatment of vocal nodules. (author)

The Development of a Physics Knowledge Enrichment Book “Optical Instrument Equipped with Augmented Reality” to Improve Students’ Learning Outcomes

Science.gov (United States)

Astra, I. M.; Saputra, F.

2018-05-01

This study aims to develop a physics knowledge enrichment book which is provided with augmented reality focusing on the proper optical instruments as the subject to improve students’ learning outcomes. This physics knowledge enrichment book entitled “Alat Optikyang dilengkapi dengan Augmented Reality” discusses some optical instruments seeing from its history, physics concepts, and types. This study used method Research and Development which is developed as Model Pengembangan Instruksional. In the previous study has been done feasibility test to the material and media experts with the percentage by each experts are 88,50% and 88,90%. In this study, we did the trial run of product use was carried out to a physics teacher and 25 students of SMAN 33 Jakarta. This trial run got the average percentage of 88.10% from the physics teacher while the result of the students was 82.80% and the gain normalized test result of 0.71 which meant the students’ learning outcomes had increased in cognitive domain with high interpretation. Based on the result of this study, the physics knowledge enrichment book entitled “Alat Optik yang dilengkapi dengan Augmented Reality” is a proper book in order to improve students’ learning outcomes in cognitive domain with high interpretation.

Practical implications of neutron survey instrument performance

International Nuclear Information System (INIS)

Tanner, R. J.; Bartlett, D. T.; Hager, I. G.; Jones, I. N.; Molinos, C.; Roberts, N. J.; Taylor, G. C.; Thomas, D. J.

2004-01-01

Improvements have been made to the Monte Carlo modelling used to calculate the response of the neutron survey instruments most commonly used in the UK, for neutron energies up to 20 MeV. The improved modelling of the devices includes the electronics and battery pack, allowing better calculations of both the energy and angle dependence of response. These data are used to calculate the response of the instruments in rotationally and fully isotropic, as well as unidirectional fields. Experimental measurements with radionuclide sources and monoenergetic neutron fields have been, and continue to be made, to test the calculated response characteristics. The enhancements to the calculations have involved simulation of the sensitivity of the response to variations in instrument manufacture, and will include the influence of the user and floor during measurements. The practical implications of the energy and angle dependence of response, variations in manufacture, and the influence of the user are assessed by folding the response characteristics with workplace energy and direction distributions. (authors)

The Prospects of Musical Instruments For People with Physical Disabilities

DEFF Research Database (Denmark)

Larsen, Jeppe Veirum; Overholt, Daniel; Moeslund, Thomas B.

2016-01-01

Many forms of enabling technologies exist today. While technologies aimed at enabling basic tasks in everyday life (locomotion, eating, etc.) are more common, musical instruments for people with disabilities can provide a chance for emotional enjoyment, as well as improve physical conditions thro...... instruments, music-supported therapy, and recent trends in the area. The overview is extrapolated to look at where the research is headed, providing insights for potential future work.......Many forms of enabling technologies exist today. While technologies aimed at enabling basic tasks in everyday life (locomotion, eating, etc.) are more common, musical instruments for people with disabilities can provide a chance for emotional enjoyment, as well as improve physical conditions...... through therapeutic use. The field of musical instruments for people with physical disabilities, however, is still an emerging area of research. In this article, we look at the current state of developments, including a survey of custom designed instruments, augmentations / modifications of existing...

Technical basis for instrumentation and control design improvements in WWER-440/230 nuclear power plants. A publication of the extrabudgetary programme on the safety of WWER and RBMK nuclear power plants

International Nuclear Information System (INIS)

1996-01-01

Instrumentation and control (I and C) has been recognized as an area which requires substantial improvements in WWER NNPs, particularly for model 230 plants. Under contract with the IAEA the Spanish company Empresarios Agrupados (EA) developed a basic document proposing a technical basis for improvements related to the following most significant aspects of I and C: criteria for safety classification; remote shutdown panel; I and C support to operation and control room design; instrumentation set point margins; accident monitoring instrumentation. This publication is derived from the original report of EA which was circulated by the IAEA for review by staff members and experts from various Member States. It was finally agreed upon at a Consultants' meeting convened by the IAEA in Vienna in May 1994 with the participation of experts from France, Germany and Spain. The guidance expressed in this report is based on the IAEA/NUSS standards, safety guides and practices, and on regulations in use in various Member States. It is proposed as a way of carrying out the necessary studies to improve safety by upgrading the vital part of instrumentation an control in WWER-440 model 230 nuclear power plants. 28 refs, 3 figs

The Effects of Extravehicular Activity (EVA) Glove Pressure on Hand Strength

Science.gov (United States)

Mesloh, Miranda; England, Scott; Benson, Elizabeth; Thompson, Shelby; Rajulu, Sudhakar

2010-01-01

The purpose of this study was to characterize hand strength, while wearing a Phase VI Extravehicular Activity (EVA) glove in an Extravehicular Mobility Unit (EMU) suit. Three types of data were collected: hand grip, lateral pinch, and pulp-2 pinch, wider three different conditions: bare-handed, gloved with no Thermal Micrometeoroid Garment (TMG), and glove with TMG. In addition, during the gloved conditions, subjects were tested when unpressurized and pressurized (43 psi). As a percentage of bare-hand strength, the TMG condition showed reduction in grip strength to 55% unpressurized and 46% pressurized. Without the TMG, grip strength increased to 66% unpressurized and 58% pressurized of bare-hand strength. For lateral pinch strength, the reduction in strength was the same for both pressure conditions and with and without the TMG, about 8.5% of bare-hand Pulp-2 pinch strength with no TMG showed an increase to 122% unpressurized and 115% pressurized of bare-hand strength. While wearing the TMG, pulp-2 pinch strength was 115% of bare-hand strength for both pressure conditions.

Entornos Personales de Aprendizaje: ¿final o futuro de los EVA?

Directory of Open Access Journals (Sweden)

Vicente Ampudia Rueda

2012-01-01

Full Text Available En la última década las universidades incorporaron el uso de Tecnologías de la Información y la Comunicación (tic en los procesos académicos, a partir de dinámicas y tecnologías diversas. A diferente ritmo, iniciaron procesos de alfabetización digital que reportan experiencias significativas; más allá de los altibajos y resistencias socioculturales, establecieron ejes de acción, conformaron campus virtuales y Entornos Virtuales de Aprendizaje (eva. Sin embargo, en la actualidad surge una nueva discusión cuestionando el papel de estas aplicaciones y su futuro ante la Web 3.0 y el uso masivo de redes sociales. La reflexión se centra en cómo producir contenidos, integrar comunidades virtuales, superar la incompatibilidad tecnológica y las desventajas de la administración centralizada en línea. Ante este panorama surgen los Entornos Personales de Aprendizaje (ple por sus siglas en inglés, Personal Learning Enviroment. Pretendemos analizar la pertinencia de esta perspectiva en la UAM-Xochimilco.

Investigation of test methods, material properties, and processes for solar cell encapsulants. Fourteenth quarterly progress report, August 12, 1978-November 12, 1979. [EVA, EPDM, aliphatic urethane, PVC plastisol, and butyl acrylate

Energy Technology Data Exchange (ETDEWEB)

Willis, P. B.; Baum, B.; Schnitzer, H. S.

1979-12-01

Springborn Laboratories is engaged in a study of evaluating potentially useful encapsulating materials for Task 3 of the Low-Cost Silicon Solar Array project (LSA) funded by DOE. The goal of this program is to identify, evaluate, and recommend encapsulant materials and processes for the production of cost-effective, long-life solar cell modules. This report presents the results of a cost analysis of candidate potting compounds for long life solar module encapsulation. Additionally, the two major encapsulation processes, sheet lamination and liquid casting, are costed on the basis of a large scale production facility. Potting compounds studied include EVA, sheet, clear; EVA, sheet, pigmented; EPDM, sheet, clear; Aliphatic urethane, syrup; PVC Plastisol; Butyl acrylate, syrup; and Butyl acrylate, sheet.

Mixed field dose equivalent measuring instruments

International Nuclear Information System (INIS)

Brackenbush, L.W.; McDonald, J.C.; Endres, G.W.R.; Quam, W.

1985-01-01

In the past, separate instruments have been used to monitor dose equivalent from neutrons and gamma rays. It has been demonstrated that it is now possible to measure simultaneously neutron and gamma dose with a single instrument, the tissue equivalent proportional counter (TEPC). With appropriate algorithms dose equivalent can also be determined from the TEPC. A simple ''pocket rem meter'' for measuring neutron dose equivalent has already been developed. Improved algorithms for determining dose equivalent for mixed fields are presented. (author)

Comparing Binaural Pre-processing Strategies I: Instrumental Evaluation.

Science.gov (United States)

Baumgärtel, Regina M; Krawczyk-Becker, Martin; Marquardt, Daniel; Völker, Christoph; Hu, Hongmei; Herzke, Tobias; Coleman, Graham; Adiloğlu, Kamil; Ernst, Stephan M A; Gerkmann, Timo; Doclo, Simon; Kollmeier, Birger; Hohmann, Volker; Dietz, Mathias

2015-12-30

In a collaborative research project, several monaural and binaural noise reduction algorithms have been comprehensively evaluated. In this article, eight selected noise reduction algorithms were assessed using instrumental measures, with a focus on the instrumental evaluation of speech intelligibility. Four distinct, reverberant scenarios were created to reflect everyday listening situations: a stationary speech-shaped noise, a multitalker babble noise, a single interfering talker, and a realistic cafeteria noise. Three instrumental measures were employed to assess predicted speech intelligibility and predicted sound quality: the intelligibility-weighted signal-to-noise ratio, the short-time objective intelligibility measure, and the perceptual evaluation of speech quality. The results show substantial improvements in predicted speech intelligibility as well as sound quality for the proposed algorithms. The evaluated coherence-based noise reduction algorithm was able to provide improvements in predicted audio signal quality. For the tested single-channel noise reduction algorithm, improvements in intelligibility-weighted signal-to-noise ratio were observed in all but the nonstationary cafeteria ambient noise scenario. Binaural minimum variance distortionless response beamforming algorithms performed particularly well in all noise scenarios. © The Author(s) 2015.

Studying the Mars atmosphere using a SOIR Instrument

Science.gov (United States)

Drummond, R.; Vandaele, A.; Daerden, F.; Neefs, E.; Mahieux, A.; Wilquet, V.; Montmessin, F.; Bertaux, J.; McConnell, J. C.; Kaminski, J. W.

2009-05-01

SOIR (Solar Occultation InfraRed spectrometer) is currently part of the SPICAV/SOIR instrument on board the Venus Express orbiter (VEX). SOIR, an Echelle infrared spectrometer using an acousto-optic tunable filter (AOTF) for the order selection, is probing the atmosphere by solar occultation, operating between 2.2 and 4.3 μm, with a resolution of 0.15 cm-1. This spectral range is suitable for the detection of several key components of planetary atmospheres, including H2O and its isotopologue HDO, CH4 and other trace species. The SOIR instrument was designed to have a minimum of moving parts, to be light and compact in order to fit on top of the SPICAV instrument. The AOTF allows a narrow range of wavelengths to pass, according to the radio frequency applied to the TeO2 crystal; this selects the order. The advantage of the AOTF is that different orders can be observed quickly and easily during one occultation. To obtain a compact optical scheme, a Littrow configuration was implemented in which the usual collimating and imaging lenses are merged into a single off-axis parabolic mirror. The light is diffracted on the echelle grating, where orders overlap and addition occurs, and finally is recorded by the detector. The detector is 320x256 pixels and is cooled to 88K during an occultation measurement, to maximise the signal to noise ratio. SOIR on VEX has been in orbit around Venus since April 2006, allowing us to characterise the instrument and study its performance. These data have allowed the engineering team to devise several instrumental improvements. The next step in further improving the readiness for Martian atmospheric studies comes in close collaboration with the Mars Atmospheric Modelling group at BIRA-IASB. A General Circulation Model is used to simulate the Martian atmosphere. Currently work is underway with SPICAM data to verify the GCM inputs and outputs. Later the GCM output will be used as feedback for instrumental design of both an improved version

Inspector-instrument interface in portable NDA instrumentation

International Nuclear Information System (INIS)

Halbig, J.K.; Klosterbuer, S.F.

1981-01-01

Recent electronics technology advances make it possible to design sophisticated instruments in small packages for convenient field implementation. An inspector-instrument interface design that allows communication of procedures, responses, and results between the instrument and user is presented. This capability has been incorporated into new spent-fuel instrumentation and a battery-powered multichannel analyzer

Inspector-instrument interface in portable NDA instrumentation

International Nuclear Information System (INIS)

Halbig, J.K.; Klosterbuer, S.F.

1981-01-01

Recent electronics technology advances make it possible to design sophisticated instruments in small packages for convenient field implementation. This report describes an inspector-instrument interface design which allows communication of procedures, responses, and results between the instrument and user. The interface has been incorporated into new spent-fuel instrumentation and a battery-powered multichannel analyzer

IVA Ultrasonic and Eddy Current NDE for ISS

Data.gov (United States)

National Aeronautics and Space Administration — The project intends to develop a combined Ultrasonic and Eddy Current nondestructive evaluation (NDE) instrument for IVA use on ISS. A suite of IVA and EVA NDE...

The selection of embedded computer using in the nuclear physics instruments

International Nuclear Information System (INIS)

Zhang Jianchuan; Nan Gangyang; Wang Yanyu; Su Hong

2010-01-01

It introduces the requirement for embedded PC and the benefits of using it in the experimental nuclear physics instrument developing and improving project. A cording to the specific requirements in the project of improving laboratory instruments. several kinds of embedded computer are compared and specifically tested. Thus, a x86 architecture embedded computer, which have ultra-low-power consumption and a small in size, is selected to be the main component of the controller using in the nuclear physics instrument, and this will be used in the high-speed data acquisition and electronic control system. (authors)

Improved Astronomical Instrumentation for the Far Ultra-Violet

Science.gov (United States)

Witt, Emily M.; Fleming, Brian; Egan, Arika; Tyler, Rachel; Wiley, James

2018-06-01

Recent technological advances have opened up new instrument capabilities in the ultraviolet. Of particular interest are advanced deposition processes that have made lithium fluoride (LiF) based mirrors more accessible, achieving greater than 80% broadband reflectivity down into the Lyman UV (100 nm). Traditional MgF2 protected aluminum mirrors cut off at 115 nm, missing crucial tracers of warm gas and molecules. The hygroscopic sensitivity of LiF, which adds mission risk and cost, has also been mitigated with a thin capping layer of a more durable substance, making LiF mirrors accessible without onerous environmental procedures. These advances open up a new paradigm in UV astronomy by enabling multi-reflection systems in the Lyman UV. We present recent progress in the testing of eLiF-based optics, and then discuss the potential scientific avenues this opens up in UV astronomy.

[Development of an evaluation instrument for service quality in nursing homes].

Science.gov (United States)

Lee, Jia; Ji, Eun Sun

2011-08-01

The purposes of this study were to identify the factors influencing service quality in nursing homes, and to develop an evaluation instrument for service quality. A three-phase process was employed for the study. 1) The important factors to evaluate the service quality in nursing homes were identified through a literature review, panel discussion and focus group interview, 2) the evaluation instrument was developed, and 3) validity and reliability of the study instrument were tested by factor analysis, Pearson correlation coefficient, Cronbach's α and Cohen's Kappa. Factor analysis showed that the factors influencing service quality in nursing homes were healthcare, diet/assistance, therapy, environment and staff. To improve objectivity of the instrument, quantitative as well as qualitative evaluation approaches were adopted. The study instrument was developed with 30 items and showed acceptable construct validity. The criterion-related validity was a Pearson correlation coefficient of .85 in 151 care facilities. The internal consistency was Cronbach's α=.95. The instrument has acceptable validity and a high degree of reliability. Staff in nursing homes can continuously improve and manage their services using the results of the evaluation instrument.

STS-87 Mission Specialists Scott and Doi with EVA coordinator Laws participate in the CEIT for their

Science.gov (United States)

1997-01-01

Participating in the Crew Equipment Integration Test (CEIT) at Kennedy Space Center are STS-87 crew members, assisted by Glenda Laws, extravehicular activity (EVA) coordinator, Johnson Space Center, at left. Next to Laws is Mission Specialist Takao Doi, Ph.D., of the National Space Development Agency of Japan, who is looking on as Mission Specialist Winston Scott gets a hands-on look at some of the equipment. The STS-87 mission will be the fourth United States Microgravity Payload and flight of the Spartan-201 deployable satellite. During the mission, scheduled for a Nov. 19 liftoff from KSC, Dr. Doi and Scott will both perform spacewalks.

CAMAC-controlled calibration system for nuclear reactor instruments

International Nuclear Information System (INIS)

McDowell, W.P.; Cornella, R.J.

1977-01-01

The hardware and the software which have been developed to implement a nuclear instrument calibration system for the Argonne National Laboratory ZPR-VI and ZPR-IX reactor complex are described. The system is implemented using an SEL-840 computer with its associated CAMAC crates and a hardware interface to generate input parameters and measure the required outputs on the instrument under test. Both linear and logarithmic instruments can be calibrated by the system and output parameters can be measured at various automatically selected values of ac line voltage. A complete report on each instrument is printed as a result of the calibration and out-of-tolerance readings are flagged. Operator interface is provided by a CAMAC-controlled Hazeltine terminal. The terminal display leads the operator through the complete calibration procedure. This computer-controlled system is a significant improvement over previously used methods of calibrating nuclear instruments since it reduces reactor downtime and allows rapid detection of long-term changes in instrument calibration

Atmospheric Radiation Measurement Climate Research Facility (ACRF Instrumentation Status: New, Current, and Future)

Energy Technology Data Exchange (ETDEWEB)

JW Voyles

2008-01-30

The purpose of this report is to provide a concise but comprehensive overview of Atmospheric Radiation Measurement Climate Research Facility instrumentation status. The report is divided into the following four sections: (1) new instrumentation in the process of being acquired and deployed, (2) existing instrumentation and progress on improvements or upgrades, (3) proposed future instrumentation, and (4) Small Business Innovation Research instrument development.

Cyclic Fatigue of Different Nickel-Titanium Rotary Instruments: A Comparative Study

OpenAIRE

Testarelli, L.; Grande, N.M; Plotino, G; Lendini, M; Pongione, G; Paolis, G. De; Rizzo, F; Milana, V; Gambarini, G

2009-01-01

Since the introduction of nickel-titanium alloy to endodontics, there have been many changes in instrument design, but no significant improvements in the raw material properties, or enhancements in the manufacturing process. Recently, a new method to produce nickel-titanium rotary (NTR) instruments has been developed, in an attempt to obtain instruments that are more flexible and resistant to fatigue. NTR instruments produced using the process of twisting (TF, SybronEndo, Orange, CA) were com...

Monte Carlo simulations of neutron-scattering instruments using McStas

DEFF Research Database (Denmark)

Nielsen, K.; Lefmann, K.

2000-01-01

Monte Carlo simulations have become an essential tool for improving the performance of neutron-scattering instruments, since the level of sophistication in the design of instruments is defeating purely analytical methods. The program McStas, being developed at Rise National Laboratory, includes...

A qualitative evaluation of policy instruments used to improve energy performance of existing private dwellings in the Netherlands

International Nuclear Information System (INIS)

Murphy, Lorraine; Meijer, Frits; Visscher, Henk

2012-01-01

Climate change policies in the Netherlands recognise the importance of existing dwellings. Efforts to gain these energy savings are led at national level by policy instruments such as the Energy Performance Certificate, covenants, economic and information tools. These instruments reflect a policy style described as consensus based and incentivising. However, this approach has been subject to criticism with suggestions that alternatives are required. As a first step towards conceptualising alternatives previous evaluations and stakeholder interviews are used to assess instruments. Elements from the theory based evaluation method combined with concepts from policy instrument and energy policy literature form an evaluation framework. Results demonstrate weak impact of some key instruments. Underlying theories associated with instruments are often lost during implementation or remain unsubstantiated. Policy instrument and energy policy concepts are evident but are far from pervasive. Results show that current instruments are poorly equipped to forge a long-term energy saving strategy for existing dwellings. It is further demonstrated that complexity with existing dwellings is not only limited to frequently cited barriers but to the intricacies of designing and operating a well-orchestrated instrument mix. - Highlights: ► Instruments are evaluated using the theory based method and normative concepts. ► Lack of monitoring and evaluation data affects impact assessment. ► Impact and normative concepts are reflected in part in individual instruments. ► A coherent strategy that demonstrates impact and reflects concepts is absent. ► Results form a first step from which to conceptualise alternatives.

HPS instrument calibration laboratory accreditation program

Energy Technology Data Exchange (ETDEWEB)

Masse, F.X; Eisenhower, E.H.; Swinth, K.L.

1993-12-31

The purpose of this paper is to provide an accurate overview of the development and structure of the program established by the Health Physics Society (HPS) for accrediting instrument calibration laboratories relative to their ability to accurately calibrate portable health physics instrumentation. The purpose of the program is to provide radiation protection professionals more meaningful direct and indirect access to the National Institute of Standards and Technology (NIST) national standards, thus introducing a means for improving the uniformity, accuracy, and quality of ionizing radiation field measurements. The process is designed to recognize and document the continuing capability of each accredited laboratory to accurately perform instrument calibration. There is no intent to monitor the laboratory to the extent that each calibration can be guaranteed by the program; this responsibility rests solely with the accredited laboratory.

Hommikuti peab sul olema suurim soov teatrisse tulla ja tööpäeva lõpus peab sul olema suurim soov koju minna / Rein Neimar ; intervjueerinud Triin Sinissaar

Index Scriptorium Estoniae

Neimar, Rein

2011-01-01

Intervjuu Tallinna Linnateatri asedirektori Rein Neimariga, kes tähistas 24. märtsil oma 60. sünnipäeva. Leningradi õppima minekust, teatritööst kui kollektiivsest tööst, teatriimest, sellest, mida teater on talle andnud jm.

Instrumentation

International Nuclear Information System (INIS)

Prieur, G.; Nadi, M.; Hedjiedj, A.; Weber, S.

1995-01-01

This second chapter on instrumentation gives little general consideration on history and classification of instrumentation, and two specific states of the art. The first one concerns NMR (block diagram of instrumentation chain with details on the magnets, gradients, probes, reception unit). The first one concerns precision instrumentation (optical fiber gyro-meter and scanning electron microscope), and its data processing tools (programmability, VXI standard and its history). The chapter ends with future trends on smart sensors and Field Emission Displays. (D.L.). Refs., figs

Applying neural networks to optimize instrumentation performance

Energy Technology Data Exchange (ETDEWEB)

Start, S.E.; Peters, G.G.

1995-06-01

Well calibrated instrumentation is essential in providing meaningful information about the status of a plant. Signals from plant instrumentation frequently have inherent non-linearities, may be affected by environmental conditions and can therefore cause calibration difficulties for the people who maintain them. Two neural network approaches are described in this paper for improving the accuracy of a non-linear, temperature sensitive level probe ised in Expermental Breeder Reactor II (EBR-II) that was difficult to calibrate.

Applying neural networks to optimize instrumentation performance

International Nuclear Information System (INIS)

Start, S.E.; Peters, G.G.

1995-01-01

Well calibrated instrumentation is essential in providing meaningful information about the status of a plant. Signals from plant instrumentation frequently have inherent non-linearities, may be affected by environmental conditions and can therefore cause calibration difficulties for the people who maintain them. Two neural network approaches are described in this paper for improving the accuracy of a non-linear, temperature sensitive level probe ised in Expermental Breeder Reactor II (EBR-II) that was difficult to calibrate