AZ91C magnesium alloy modified by Cd

DEFF Research Database (Denmark)

Shabadi, R.; Ambat, Rajan; Dwarakadasa, E.S.

2014-01-01

In the present work, the effect of Cd on the microstructure, mechanical properties and general corrosion behaviour of AZ91C alloys was investigated. Addition of Cd was found not to be efficient in modifying/refining the microstructure or β-phase. A morphology change in β-phase from fine continuous...... precipitates to discontinuous β-phase upon the addition of Cd was observed. A marginal increment in mechanical properties was observed. General corrosion behaviour was followed with weight loss measurements, potentiostatic polarisation studies and surface studies in 3.5% sodium chloride solution and 3.......5% sodium chloride with 2% potassium dichromate solution. Cd addition deteriorated the corrosion behaviour of AZ91C. This behaviour was attributed to the formation of chunks of β-phase upon the addition of Cd. AZ91C with refined β-phase distribution, performed rather better in the NaCl solutions....

Production and purification of a soluble hydrogenase from Ralstonia eutropha H16 for potential hydrogen fuel cell applications.

Science.gov (United States)

Jugder, Bat-Erdene; Lebhar, Helene; Aguey-Zinsou, Kondo-Francois; Marquis, Christopher P

2016-01-01

The soluble hydrogenase (SH) from Ralstonia eutropha H16 is a promising candidate enzyme for H2-based biofuel application as it favours H2 oxidation and is relatively oxygen-tolerant. In this report, bioprocess development studies undertaken to produce and purify an active SH are described, based on the methods previously reported [1], [2], [3], [4]. Our modifications are: •Upstream method optimizations were undertaken on heterotrophic growth media and cell lysis involving ultrasonication.•Two anion exchangers (Q Sepharose and RESOURCE Q) and size exclusion chromatographic (Superdex 200) matrices were successfully employed for purification of a hexameric SH from R. eutropha.•The H2 oxidizing activity of the SH was demonstrated spectrophotometrically in solution and also immobilized on an EPG electrode using cyclic voltammetry.

PHA Productivity and Yield of Ralstonia eutropha When Intermittently or Continuously Fed a Mixture of Short Chain Fatty Acids

Directory of Open Access Journals (Sweden)

Panchali Chakraborty

2012-01-01

Full Text Available The research described in this present study was part of a larger effort focused on developing a dual substrate, dual fermentation process to produce Polyhydroxyalkanoate (PHA. The focus of this study was developing and optimizing a strategy for feeding a mixture of SCFAs (simulated ARF and maximizing PHA production in a cost-effective way. Three different feeding strategies were examined in this study. The substrate evaluated in this study for the growth phase of R. eutropha was condensed corn solubles, a low-value byproduct of the dry-mill, corn ethanol industry. The culture was grown to high cell densities in nitrogen-supplemented condensed corn solubles media in 5 L bioreactors. The overall growth rate of R. eutropha was 0.2 h−1. The 20 mL ARF feeding every 3 h from 48 to 109 h strategy gave the best results in terms of PHA production. PHA productivity (0.0697 g L−1 h−1, PHA concentration (8.37 g L−1, and PHA content (39.52% were the highest when ARF was fed every 3 h for 61 h. This study proved that condensed corn solubles can be potentially used as a growth medium to boost PHA production by R. eutropha thus reducing the overall cost of biopolymer production.

PHA Productivity and Yield of Ralstonia eutropha When Intermittently or Continuously Fed a Mixture of Short Chain Fatty Acids

Science.gov (United States)

Chakraborty, Panchali; Muthukumarappan, Kasiviswanathan; Gibbons, William R.

2012-01-01

The research described in this present study was part of a larger effort focused on developing a dual substrate, dual fermentation process to produce Polyhydroxyalkanoate (PHA). The focus of this study was developing and optimizing a strategy for feeding a mixture of SCFAs (simulated ARF) and maximizing PHA production in a cost-effective way. Three different feeding strategies were examined in this study. The substrate evaluated in this study for the growth phase of R. eutropha was condensed corn solubles, a low-value byproduct of the dry-mill, corn ethanol industry. The culture was grown to high cell densities in nitrogen-supplemented condensed corn solubles media in 5 L bioreactors. The overall growth rate of R. eutropha was 0.2 h−1. The 20 mL ARF feeding every 3 h from 48 to 109 h strategy gave the best results in terms of PHA production. PHA productivity (0.0697 g L−1 h−1), PHA concentration (8.37 g L−1), and PHA content (39.52%) were the highest when ARF was fed every 3 h for 61 h. This study proved that condensed corn solubles can be potentially used as a growth medium to boost PHA production by R. eutropha thus reducing the overall cost of biopolymer production. PMID:23118512

PRODUCCIÓN DE POLI-β -HIDROXIBUTIRATO (PHB β POR Ralstonia eutropha ATCC 17697

Directory of Open Access Journals (Sweden)

Barbosa Marcela

2005-06-01

Full Text Available Ralstonia eutropha es la bacteria más utilizada en la producción de poli-β-hidroxibutirato (PHB por su capacidad de acumular polímero hasta en un 80% de su peso seco. En el presente trabajo se realizaron fermentaciones por lote alimentado en dos etapas a escala 3 litros usando tres concentraciones de fructosa (5, 10 y 15 g/l. En la primera etapa, manteniendo constante la relación carbono-nitrógeno en 6.85 g C/g N, se buscó obtener una alta concentración celular; en la segunda etapa las células obtenidas se limitaron en la fuente de nitrógeno para permitir la acumulación del biopolímero. La mejor concentración para producir el material es 5 g/l en la cual se obtuvo un porcentaje de acumulación del 66.2%, una velocidad de crecimiento específico inicial de 0.5171 h-1 y una productividad de 0.1245 g PHB/ l h.

Genome-wide sequencing and an open reading frame analysis of dichlorodiphenyltrichloroethane (DDT) susceptible (91-C) and resistant (91-R) Drosophila melanogaster laboratory populations

Science.gov (United States)

The Drosophila melanogaster 91-R and 91-C strains are of common origin, however, 91-R has been intensely selected for dichlorodiphenyltrichloroethane (DDT) resistance over six decades while 91-C has been maintained as the non-selected control strain. These fly strains represent a unique genetic res...

26 CFR 1.381(c)(9)-1 - Amortization of bond discount or premium.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 4 2010-04-01 2010-04-01 false Amortization of bond discount or premium. 1.381(c)(9)-1 Section 1.381(c)(9)-1 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Insolvency Reorganizations § 1.381(c)(9)-1 Amortization of...

Impact of Ralstonia eutropha's poly(3-Hydroxybutyrate) (PHB) Depolymerases and Phasins on PHB storage in recombinant Escherichia coli.

Science.gov (United States)

Eggers, Jessica; Steinbüchel, Alexander

2014-12-01

The model organism for polyhydroxybutyrate (PHB) biosynthesis, Ralstonia eutropha H16, possesses multiple isoenzymes of granules coating phasins as well as of PHB depolymerases, which degrade accumulated PHB under conditions of carbon limitation. In this study, recombinant Escherichia coli BL21(DE3) strains were used to study the impact of selected PHB depolymerases of R. eutropha H16 on the growth behavior and on the amount of accumulated PHB in the absence or presence of phasins. For this purpose, 20 recombinant E. coli BL21(DE3) strains were constructed, which harbored a plasmid carrying the phaCAB operon from R. eutropha H16 to ensure PHB synthesis and a second plasmid carrying different combinations of the genes encoding a phasin and a PHB depolymerase from R. eutropha H16. It is shown in this study that the growth behavior of the respective recombinant E. coli strains was barely affected by the overexpression of the phasin and PHB depolymerase genes. However, the impact on the PHB contents was significantly greater. The strains expressing the genes of the PHB depolymerases PhaZ1, PhaZ2, PhaZ3, and PhaZ7 showed 35% to 94% lower PHB contents after 30 h of cultivation than the control strain. The strain harboring phaZ7 reached by far the lowest content of accumulated PHB (only 2.0% [wt/wt] PHB of cell dry weight). Furthermore, coexpression of phasins in addition to the PHB depolymerases influenced the amount of PHB stored in cells of the respective strains. It was shown that the phasins PhaP1, PhaP2, and PhaP4 are not substitutable without an impact on the amount of stored PHB. In particular, the phasins PhaP2 and PhaP4 seemed to limit the degradation of PHB by the PHB depolymerases PhaZ2, PhaZ3, and PhaZ7, whereas almost no influence of the different phasins was observed if phaZ1 was coexpressed. This study represents an extensive analysis of the impact of PHB depolymerases and phasins on PHB accumulation and provides a deeper insight into the complex interplay

Rapid selection of glucose-utilizing variants of the polyhydroxyalkanoate producer Ralstonia eutropha H16 by incubation with high substrate levels.

Science.gov (United States)

Franz, A; Rehner, R; Kienle, A; Grammel, H

2012-01-01

The application of Ralstonia eutropha H16 for producing polyhydroxyalkanoates as bioplastics is limited by the incapability of the bacterium to utilize glucose as a growth substrate. This study aims in characterizing glucose-utilizing strains that arose after incubation with high glucose levels, in comparison with previously published mutants, generated either by mutagenesis or by metabolic engineering. Cultivations on solid and liquid media showed that the application of high substrate concentrations rapidly induced a glucose-positive phenotype. The time span until the onset of growth and the frequency of glucose-utilizing colonies were correlated to the initial glucose concentration. All mutants exhibited elevated activities of glucose-6-phosphate dehydrogenase. The glucose-positive phenotype was abolished after deleting genes for the N-acetylglucosamine phosphotransferase system. A procedure is provided for selecting glucose-utilizing R. eutropha H16 in an unprecedented short time period and without any mutagenic treatment. An altered N-acetylglucosamine phosphotransferase system appears to be a common motif in all glucose-utilizing mutants examined so far. The correlation of the applied glucose concentration and the appearance of glucose-utilizing mutants poses questions about the randomness or the specificity of adaptive mutations in general. Furthermore, glucose-adapted strains of R. eutropha H16 could be useful for the production of bioplastics. © 2011 The Authors. Letters in Applied Microbiology ©2011 The Society for Applied Microbiology.

Engineering Ralstonia eutropha for Production of Isobutanol (IBT) Motor Fuel from Carbon Dioxide, Hydrogen, and Oxygen Project Final Report

Energy Technology Data Exchange (ETDEWEB)

Sinskey, Anthony J. [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Worden, Robert Mark [Michigan State Univ., East Lansing, MI (United States); Brigham, Christopher [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Lu, Jingnan [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Quimby, John Westlake [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Gai, Claudia [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Speth, Daan [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Elliott, Sean [Boston Univ., MA (United States); Fei, John Qiang [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Bernardi, Amanda [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Li, Sophia [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Grunwald, Stephan [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Grousseau, Estelle [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Maiti, Soumen [Michigan State Univ., East Lansing, MI (United States); Liu, Chole [Michigan State Univ., East Lansing, MI (United States)

2013-12-16

This research project is a collaboration between the Sinskey laboratory at MIT and the Worden laboratory at Michigan State University. The goal of the project is to produce Isobutanol (IBT), a branched-chain alcohol that can serve as a drop-in transportation fuel, through the engineered microbial biosynthesis of Carbon Dioxide, Hydrogen, and Oxygen using a novel bioreactor. This final technical report presents the findings of both the biological engineering work at MIT that extended the native branched-chain amino acid pathway of the wild type Ralstonia eutropha H16 to perform this biosynthesis, as well as the unique design, modeling, and construction of a bioreactor for incompatible gasses at Michigan State that enabled the operational testing of the complete system. This 105 page technical report summarizing the three years of research includes 72 figures and 11 tables of findings. Ralstonia eutropha (also known as Cupriavidus necator) is a Gram-negative, facultatively chemolithoautotrophic bacteria. It has been the principle organism used for the study of polyhydroxybutyrate (PHB) polymer biosynthesis. The wild-type Ralstonia eutropha H16 produces PHB as an intracellular carbon storage material while under nutrient stress in the presence of excess carbon. Under this stress, it can accumulate approximately 80 % of its cell dry weight (CDW) as this intracellular polymer. With the restoration of the required nutrients, the cells are then able to catabolize this polymer. If extracted from the cell, this PHB polymer can be processed into biodegradable and biocompatible plastics, however for this research, it is the efficient metabolic pathway channeling the captured carbon that is of interest. R. eutropha is further unique in that it contains two carbon-fixation Calvin–Benson–Bassham cycle operons, two oxygen-tolerant hydrogenases, and several formate dehydrogenases. It has also been much studied for its ability in the presence of oxygen, to fix carbon dioxide

Whole-Genome Microarray and Gene Deletion Studies Reveal Regulation of the Polyhydroxyalkanoate Production Cycle by the Stringent Response in Ralstonia eutropha H16

Energy Technology Data Exchange (ETDEWEB)

Brigham, CJ; Speth, DR; Rha, C; Sinskey, AJ

2012-10-22

Poly(3-hydroxybutyrate) (PHB) production and mobilization in Ralstonia eutropha are well studied, but in only a few instances has PHB production been explored in relation to other cellular processes. We examined the global gene expression of wild-type R. eutropha throughout the PHB cycle: growth on fructose, PHB production using fructose following ammonium depletion, and PHB utilization in the absence of exogenous carbon after ammonium was resupplied. Our results confirm or lend support to previously reported results regarding the expression of PHB-related genes and enzymes. Additionally, genes for many different cellular processes, such as DNA replication, cell division, and translation, are selectively repressed during PHB production. In contrast, the expression levels of genes under the control of the alternative sigma factor sigma(54) increase sharply during PHB production and are repressed again during PHB utilization. Global gene regulation during PHB production is strongly reminiscent of the gene expression pattern observed during the stringent response in other species. Furthermore, a ppGpp synthase deletion mutant did not show an accumulation of PHB, and the chemical induction of the stringent response with DL-norvaline caused an increased accumulation of PHB in the presence of ammonium. These results indicate that the stringent response is required for PHB accumulation in R. eutropha, helping to elucidate a thus-far-unknown physiological basis for this process.

Degradation of formaldehyde at high concentrations by phenol-adapted Ralstonia eutropha closely related to pink-pigmented facultative methylotrophs.

Science.gov (United States)

Habibi, Alireza; Vahabzadeh, Farzaneh

2013-01-01

The ability of the phenol-adapted Ralstonia eutropha to utilize formaldehyde (FD) as the sole source of carbon and energy was studied. Adaptation to FD was accomplished by substituting FD for glucose in a stepwise manner. The bacterium in the liquid test culture could tolerate concentrations of FD up to 900 mg L(-1). Degradation of FD was complete in 528 h at 30°C with shaking at 150 rpm (r = 1.67 mg L(-1) h(-1)), q = 0.035 g(FD) g(cell) (-1) h(-1). Substrate inhibition kinetics (Haldane and Luong equations) are used to describe the experimental data. At non-inhibitory concentrations of FD, the Monod equation was used. According to the Luong model, the values of the maximum specific growth rate (μ(max)), half-saturation coefficient (k(S)), the maximum allowable formaldehyde concentration (S(m)), and the shape factor (n) were 0.117 h(-1), 47.6 mg L(-1), 900 mg L(-1), and 2.2, respectively. The growth response of the test bacterium to consecutive FD feedings was examined, and the FD-adapted R. eutropha cells were able to degrade 1000 mg L(-1) FD in 150 h through 4 cycles of FD feeds. During FD degradation, formic acid metabolite was formed. Assimilation of FD, methanol, formic acid, and oxalate by the test bacterium was accompanied by the formation of a pink pigment. The carotenoid nature of the cellular pigment has been confirmed and the test bacterium appeared to be closely related to pink-pigmented facultative methylotrophs (PPFM). The extent of harm to soil exposed to biotreated wastewaters containing FD may be moderated due to the association between methylotrophic/oxalotrophic bacteria and plants.

Biosynthesis and thermal properties of PHBV produced from levulinic acid by Ralstonia eutropha.

Directory of Open Access Journals (Sweden)

Yuanpeng Wang

Full Text Available Levulinic acid (LA can be cost-effectively produced from a vast array of renewable carbohydrate-containing biomaterials. LA could facilitate the commercialization of the polymer poly(hydroxybutyrate-co-hydroxyvalerate (PHBV and PHBV-based products as carbon substrates. Therefore, this paper focused on the production of PHBV by Ralstonia eutropha with LA for hydroxyvalerate (HV production, which plays an important role in enhancing the thermal properties of PHBV. Accordingly, the HV content of PHBV varied from 0-40.9% at different concentrations of LA. Stimulation of cell growth and PHBV accumulation were observed when 2-6 g L(-1 LA was supplied to the culture. The optimal nitrogen sources were determined to be 0.5 g L(-1 ammonium chloride and 2 g L(-1 casein peptone. It was determined that the optimal pH for cell growth and PHBV accumulation was 7.0. When the cultivation was performed in large scale (2 L fermenter with a low DO concentration of 30% and a pH of 7.0, a high maximum dry cell weight of 15.53 g L(-1 with a PHBV concentration of 12.61 g L(-1 (53.9% HV, up to 81.2% of the dry cell weight, was obtained. The melting point of PHBV found to be decreased as the fraction of HV present in the polymer increased, which resulted in an improvement in the ductility and flexibility of the polymer. The results of this study will improve the understanding of the PHBV accumulation and production by R. eutropha and will be valuable for the industrial production of biosynthesized polymers.

Identification of a multifunctional protein, PhaM, that determines number, surface to volume ratio, subcellular localization and distribution to daughter cells of poly(3-hydroxybutyrate), PHB, granules in Ralstonia eutropha H16.

Science.gov (United States)

Pfeiffer, Daniel; Wahl, Andreas; Jendrossek, Dieter

2011-11-01

A two-hybrid approach was applied to screen for proteins with the ability to interact with PHB synthase (PhaC1) of Ralstonia eutropha. The H16_A0141 gene (phaM) was identified in the majority of positive clones. PhaM (26.6 kDa) strongly interacted with PhaC1 and with phasin PhaP5 but not with PhaP1 or other PHB granule-associated proteins. A ΔphaM mutant accumulated only one or two large PHB granules instead of three to six medium-sized PHB granules of the wild type, and distribution of granules to daughter cells was disordered. All three phenotypes (number, size and distribution of PHB granules) were reversed by reintroduction of phaM. Purified PhaM revealed DNA-binding properties in gel mobility shift experiments. Expression of a fusion of the yellow fluorescent protein (eYfp) with PhaM resulted in formation of many small fluorescent granules that were bound to the nucleoid region. Remarkably, an eYfp-PhaP5 fusion localized at the cell poles in a PHB-negative background and overexpression of eYfp-PhaP5 in the wild type conferred binding of PHB granules to the cell poles. In conclusion, subcellular localization of PHB granules in R. eutropha depends on a concerted expression of at least three PHB granule-associated proteins, namely PhaM, PhaP5 and PHB synthase PhaC1. © 2011 Blackwell Publishing Ltd.

76 FR 68243 - Social Security Rulings, SSR 91-1c and SSR 66-18c; Rescission of Social Security Rulings (SSR) 66...

Science.gov (United States)

2011-11-03

..., Social Security Online, at http://www.socialsecurity.gov . SUPPLEMENTARY INFORMATION: SSRs make available... SOCIAL SECURITY ADMINISTRATION [Docket No. SSA-2011-0068] Social Security Rulings, SSR 91-1c and SSR 66-18c; Rescission of Social Security Rulings (SSR) 66-18c and SSR 91-1c AGENCY: Social Security...

Selective Sweep Analysis in the Genomes of the 91-R and 91-C Drosophila melanogaster Strains Reveals Few of the ‘Usual Suspects’ in Dichlorodiphenyltrichloroethane (DDT) Resistance

Science.gov (United States)

Steele, Laura D.; Coates, Brad; Valero, M. Carmen; Sun, Weilin; Seong, Keon Mook; Muir, William M.; Clark, John M.; Pittendrigh, Barry R.

2015-01-01

Adaptation of insect phenotypes for survival after exposure to xenobiotics can result from selection at multiple loci with additive genetic effects. To the authors’ knowledge, no selective sweep analysis has been performed to identify such loci in highly dichlorodiphenyltrichloroethane (DDT) resistant insects. Here we compared a highly DDT resistant phenotype in the Drosophila melanogaster (Drosophila) 91-R strain to the DDT susceptible 91-C strain, both of common origin. Whole genome re-sequencing data from pools of individuals was generated separately for 91-R and 91-C, and mapped to the reference Drosophila genome assembly (v. 5.72). Thirteen major and three minor effect chromosome intervals with reduced nucleotide diversity (π) were identified only in the 91-R population. Estimates of Tajima's D (D) showed corresponding evidence of directional selection in these same genome regions of 91-R, however, no similar reductions in π or D estimates were detected in 91-C. An overabundance of non-synonymous proteins coding to synonymous changes were identified in putative open reading frames associated with 91-R. Except for NinaC and Cyp4g1, none of the identified genes were the ‘usual suspects’ previously observed to be associated with DDT resistance. Additionally, up-regulated ATP-binding cassette transporters have been previously associated with DDT resistance; however, here we identified a structurally altered MDR49 candidate resistance gene. The remaining fourteen genes have not previously been shown to be associated with DDT resistance. These results suggest hitherto unknown mechanisms of DDT resistance, most of which have been overlooked in previous transcriptional studies, with some genes having orthologs in mammals. PMID:25826265

[Recombinant OspC identification and antigenicity detection from Borrelia burgdorferi PD91 in China].

Science.gov (United States)

Chen, Jian; Wan, Kang-Lin

2003-10-01

To recombine OspC gene from Borrelia burgdorferi PD91 of China and expressed it in E. coli for early diagnosis of Lyme disease. The OspC gene was amplified from the genome of Borrelia burgdorferi PD91 strain by polymerase chain reaction and recombined with plasmid PET-11D. The recombinant plasmid PET-11D-OspC was identified with PCR, restriction endonuclease analysis and sequencing. The antigenicity was verified with Western Blot. OspC gene was cloned correctly into vector PET-11D. The resultant sequence was definitely different from the published sequence. The recombinant OspC seemed to have had strong antigenicity. The findings laid basis for the studies on early diagnosis of Lyme disease.

Cloning, expression, purification, crystallization and X-ray crystallographic analysis of β-ketothiolase B from Ralstonia eutropha H16.

Science.gov (United States)

Kim, Eun-Jung; Son, Hyeoncheol Francis; Chang, Jeong Ho; Kim, Kyung-Jin

2014-03-01

Polyhydroxyalkanoates are linear polyesters that are produced by bacterial fermentation and are used as biodegradable bioplastics. β-Ketothiolase B (BktB) from Ralstonia eutropha (ReBktB) is a key enzyme for the production of various types of copolymers by catalyzing the condensation reactions of acetyl-CoA with propionyl-CoA and butyryl-CoA. The ReBktB protein was crystallized using the hanging-drop vapour-diffusion method in the presence of 25% polyethylene glycol 3350, 0.1 M bis-tris pH 6.5, 0.2 M lithium sulfate at 295 K. X-ray diffraction data were collected to a maximum resolution of 2.3 Å on a synchrotron beamline. The crystal belonged to space group C2221, with unit-cell parameters a = 106.95, b = 107.24, c = 144.14 Å. With two molecules per asymmetric unit, the crystal volume per unit protein weight (VM) is 2.54 Å(3) Da(-1), which corresponds to a solvent content of approximately 51.5%. The structure was solved by the molecular-replacement method and refinement of the structure is in progress.

Characterization of poly-3-hydroxybutyrate (PHB) produced from Ralstonia eutropha using an alkali-pretreated biomass feedstock.

Science.gov (United States)

Saratale, Ganesh D; Oh, Min-Kyu

2015-09-01

Alkaline pretreatment using NaOH, KOH, or NaOCl has been applied to various types of waste biomass to enhance enzymatic digestibility. Pretreatment (2% NaOH, 121 °C, 30 min) of rice paddy straw (PS) resulted in a maximum yield of 703 mg of reducing sugar per gram of PS with 84.19% hydrolysis yield after a two-step enzymatic hydrolysis process. Ralstonia eutropha ATCC 17699 was tested for its ability to synthesize poly-3-hydroxybutyrate (PHB) using PS hydrolysates as its sole carbon source. It is noteworthy that dry cell weight, polyhydroxyalkanoate (PHA) accumulation and PHB yield with the use of laboratory-grade sugars were similar to those achieved with PS-derived sugars. Under optimized conditions, we observed maximal PHA accumulation (75.45%) and PHB production (11.42 g/L) within 48 h of fermentation. After PHB recovery, the physicochemical properties of PHB were determined by various analytical techniques, showed the results were consistent with the characteristics of a standard polymer of PHB. Thus, the PS hydrolysate proved to be an excellent cheap carbon substrate for PHB production. Copyright © 2015 Elsevier B.V. All rights reserved.

Interfacial microstructure and mechanical properties of Cf/AZ91D composites with TiO2 and PyC fiber coatings.

Science.gov (United States)

Li, Shaolin; Qi, Lehua; Zhang, Ting; Ju, Luyan; Li, Hejun

2017-10-01

In spite of the effectiveness of the fiber coatings on interface modification of carbon fiber reinforced magnesium matrix composites, the cost and exclusive equipment for the coatings preparation are usually ignored during research work. In this paper, pyrolytic carbon (PyC) and TiO 2 were coated on carbon fiber surface to study the effects of fiber coatings on interfacial microstructure and mechanical properties of carbon fiber reinforced AZ91D composites (C f /AZ91D composites). It was indicated that both the two coatings could modify the interface and improve the mechanical properties of the composites. The ultimate tensile strength of the TiO 2 -C f /AZ91D and the PyC-C f /AZ91D composite were 333MPa and 400MPa, which were improved by 41.7% and 70.2% respectively, compared with the untreated-C f /AZ91D composite. The microstructure observation revealed that the strengthening of the composites relied on fiber integrity and moderate interfacial bonding. MgO nano-particles were generated at the interface due to the reaction of TiO 2 with Mg in the TiO 2 -C f /AZ91D composite. The volume expansion resulting from the reaction let to disordered intergranular films and crystal defects at the interface. The fibers were protected and the interfacial reaction was restrained by PyC coating in the PyC-C f /AZ91D composite. The principle to select the coating of fiber was proposed by comparing the effectiveness and cost of the coatings. Copyright © 2017 Elsevier Ltd. All rights reserved.

Influence of endogenous plasmids on phenotypes of Pantoea vagans strain C9-1 associated with epiphytic fitness

Science.gov (United States)

Pantoea vagans strain C9-1 is an effective biological control agent for fire blight of pear and apple. C9-1 carries three circular plasmids: pPag1 (168 kb), pPag2 (166 kb), and pPag3 (530 kb). Of these, pPag3, a member of the large Pantoea plasmid family, was proposed to contribute to epiphytic fitn...

Microstructural evolution of ASTM P91 after 100,000 hours exposure at 550 C and 600 C

Energy Technology Data Exchange (ETDEWEB)

Cipolla, L.; Venditti, D.; Di Gianfrancesco, A. [Centro Sviluppo Materiali SpA, Rome (Italy); Caminada, S. [TenarisDalmine, Dalmine (Italy); Danielsen, H.K. [Technical Univ. of Denmark, Lyngby (Denmark)

2010-07-01

ASTM A335 P91 samples were investigated after creep testing at 550 C and 600 C for over 10{sup 5} h. X-Ray Diffraction, Scanning and Transmission Electron Microscopy were adopted to assess the microstructural evolution of the material in terms of precipitation changes during high temperature exposure. Mean equivalent diameters and average chemical compositions of MX and M{sub 23}C{sub 6} precipitates and Laves phases were assessed through the analysis of a large number of particles. Their growth and coarsening kinetics were determined at 600 C on many samples with increasing exposure times up to 100,000 hours. Also the presence of modified Z-phase, Cr(V, Nb)N, was investigated. The high microstructural stability of Grade 91 is related to the presence of fine and distributed MX carbonitrides, always present even after very long term temperature exposure. The mean size of MX carbonitrides remains almost constant and stays below 45 nm after 10{sup 5} h at 600 C. Although MX particles exhibit a Cr enrichment with increasing ageing times, indicating that they are absorbing Cr atoms from the surrounding matrix, their transformation into Z-phase is still at a very preliminary stage: only a few hybrid MX/Z particles and a few Z-phase precipitates were identified in the most aged sample after 10{sup 5} at 600 C. Coarsening of M{sub 23}C{sub 6} occurs during thermal exposure, but their average equivalent diameter, initially of 140 nm in the as-treated material, remains below 200 nm after 10{sup 5} h at 600 C. Laves particles form at grain boundaries after a relatively short time and soon become the largest precipitates. (orig.)

Crystal structure and biochemical characterization of beta-keto thiolase B from polyhydroxyalkanoate-producing bacterium Ralstonia eutropha H16

Energy Technology Data Exchange (ETDEWEB)

Kim, Eun-Jung; Son, Hyeoncheol Francis [Structural and Molecular Biology Laboratory, School of Life Sciences and Biotechnology, Kyungpook National University, Daehak-ro 80, Buk-ku, Daegu 702-701 (Korea, Republic of); Kim, Sangwoo [Structural and Molecular Biology Laboratory, School of Life Sciences and Biotechnology, Kyungpook National University, Daehak-ro 80, Buk-ku, Daegu 702-701 (Korea, Republic of); School of Nono-Bioscience and Chemical Engineering, Ulsan National Institute of Science and Technology (UNIST), Ulsan 689-798 (Korea, Republic of); Ahn, Jae-Woo [Structural and Molecular Biology Laboratory, School of Life Sciences and Biotechnology, Kyungpook National University, Daehak-ro 80, Buk-ku, Daegu 702-701 (Korea, Republic of); Kim, Kyung-Jin, E-mail: kkim@knu.ac.kr [Structural and Molecular Biology Laboratory, School of Life Sciences and Biotechnology, Kyungpook National University, Daehak-ro 80, Buk-ku, Daegu 702-701 (Korea, Republic of)

2014-02-14

Highlights: • We determined a crystal structure of β-keto thiolase from Ralstonia eutropha H16 (ReBktB). • Distinct substrate binding mode ReBktB was elucidated. • Enzymatic kinetic parameters of ReBktB were revealed. - Abstract: ReBktB is a β-keto thiolase from Ralstonia eutropha H16 that catalyzes condensation reactions between acetyl-CoA with acyl-CoA molecules that contains different numbers of carbon atoms, such as acetyl-CoA, propionyl-CoA, and butyryl-CoA, to produce valuable bioproducts, such as polyhydroxybutyrate, polyhydroxybutyrate-hydroxyvalerate, and hexanoate. We solved a crystal structure of ReBktB at 2.3 Å, and the overall structure has a similar fold to that of type II biosynthetic thiolases, such as PhbA from Zoogloea ramigera (ZrPhbA). The superposition of this structure with that of ZrPhbA complexed with CoA revealed the residues that comprise the catalytic and substrate binding sites of ReBktB. The catalytic site of ReBktB contains three conserved residues, Cys90, His350, and Cys380, which may function as a covalent nucleophile, a general base, and second nucleophile, respectively. For substrate binding, ReBktB stabilized the ADP moiety of CoA in a distinct way compared to ZrPhbA with His219, Arg221, and Asp228 residues, whereas the stabilization of β-mercaptoethyamine and pantothenic acid moieties of CoA was quite similar between these two enzymes. Kinetic study of ReBktB revealed that K{sub m}, V{sub max}, and K{sub cat} values of 11.58 μM, 1.5 μmol/min, and 102.18 s{sup −1}, respectively, and the catalytic and substrate binding sites of ReBktB were further confirmed by site-directed mutagenesis experiments.

Role of manganese on the grain refining efficiency of AZ91D magnesium alloy refined by Al4C3

International Nuclear Information System (INIS)

Liu Shengfa; Zhang Yuan; Han Hui

2010-01-01

A novel Mg-50% Al 4 C 3 (hereafter in wt.%) master alloy has been developed by powder in situ synthesis process, the role of manganese on the grain refining efficiency of AZ91D magnesium alloy refined by this master alloy has been investigated. X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDS) results show the existence of Al 4 C 3 particles in this master alloy. After addition of 0.6% Al 4 C 3 or combined addition of 0.6% Al 4 C 3 and 0.27% Mn, the average grain size of AZ91D decreased dramatically from 360 μm to 210 μm, and from 360 μm to130 μm, respectively. However, no further refinement of grain size was achieved with additional amount of Mn exceeding 0.27% for AZ91D alloy refined by 0.6% Al 4 C 3 in the present investigation. Al-C-O-Mn-Fe-rich intermetallic particles with an Al-C-O-rich coating film, often observed in the central region of magnesium grains of the AZ91D alloy treated by the combination of Al 4 C 3 and Mn, are proposed to be the potent nucleating substrates for primary α-Mg.

Localization of poly(3-hydroxybutyrate) (PHB) granule-associated proteins during PHB granule formation and identification of two new phasins, PhaP6 and PhaP7, in Ralstonia eutropha H16.

Science.gov (United States)

Pfeiffer, Daniel; Jendrossek, Dieter

2012-11-01

Poly(3-hydroxybutyrate) (PHB) granules are covered by a surface layer consisting of mainly phasins and other PHB granule-associated proteins (PGAPs). Phasins are small amphiphilic proteins that determine the number and size of accumulated PHB granules. Five phasin proteins (PhaP1 to PhaP5) are known for Ralstonia eutropha. In this study, we identified three additional potential phasin genes (H16_B1988, H16_B2296, and H16_B2326) by inspection of the R. eutropha genome for sequences with "phasin 2 motifs." To determine whether the corresponding proteins represent true PGAPs, fusions with eYFP (enhanced yellow fluorescent protein) were constructed. Similar fusions of eYFP with PhaP1 to PhaP5 as well as fusions with PHB synthase (PhaC1), an inactive PhaC1 variant (PhaC1-C319A), and PhaC2 were also made. All fusions were investigated in wild-type and PHB-negative backgrounds. Colocalization with PHB granules was found for all PhaC variants and for PhaP1 to PhaP5. Additionally, eYFP fusions with H16_B1988 and H16_B2326 colocalized with PHB. Fusions of H16_B2296 with eYFP, however, did not colocalize with PHB granules but did colocalize with the nucleoid region. Notably, all fusions (except H16_B2296) were soluble in a ΔphaC1 strain. These data confirm that H16_B1988 and H16_B2326 but not H16_B2296 encode true PGAPs, for which we propose the designation PhaP6 (H16_B1988) and PhaP7 (H16_B2326). When localization of phasins was investigated at different stages of PHB accumulation, fusions of PhaP6 and PhaP7 were soluble in the first 3 h under PHB-permissive conditions, although PHB granules appeared after 10 min. At later time points, the fusions colocalized with PHB. Remarkably, PHB granules of strains expressing eYFP fusions with PhaP5, PhaP6, or PhaP7 localized predominantly near the cell poles or in the area of future septum formation. This phenomenon was not observed for the other PGAPs (PhaP1 to PhaP4, PhaC1, PhaC1-C319A, and PhaC2) and indicated that some phasins

Catalytic Properties of the Isolated Diaphorase Fragment of the NAD+-Reducing [NiFe]-Hydrogenase from Ralstonia eutropha

Science.gov (United States)

Lauterbach, Lars; Idris, Zulkifli; Vincent, Kylie A.; Lenz, Oliver

2011-01-01

The NAD+-reducing soluble hydrogenase (SH) from Ralstonia eutropha H16 catalyzes the H2-driven reduction of NAD+, as well as reverse electron transfer from NADH to H+, in the presence of O2. It comprises six subunits, HoxHYFUI2, and incorporates a [NiFe] H+/H2 cycling catalytic centre, two non-covalently bound flavin mononucleotide (FMN) groups and an iron-sulfur cluster relay for electron transfer. This study provides the first characterization of the diaphorase sub-complex made up of HoxF and HoxU. Sequence comparisons with the closely related peripheral subunits of Complex I in combination with UV/Vis spectroscopy and the quantification of the metal and FMN content revealed that HoxFU accommodates a [2Fe2S] cluster, FMN and a series of [4Fe4S] clusters. Protein film electrochemistry (PFE) experiments show clear electrocatalytic activity for both NAD+ reduction and NADH oxidation with minimal overpotential relative to the potential of the NAD+/NADH couple. Michaelis-Menten constants of 56 µM and 197 µM were determined for NADH and NAD+, respectively. Catalysis in both directions is product inhibited with K I values of around 0.2 mM. In PFE experiments, the electrocatalytic current was unaffected by O2, however in aerobic solution assays, a moderate superoxide production rate of 54 nmol per mg of protein was observed, meaning that the formation of reactive oxygen species (ROS) observed for the native SH can be attributed mainly to HoxFU. The results are discussed in terms of their implications for aerobic functioning of the SH and possible control mechanism for the direction of catalysis. PMID:22016788

Dihydrolipoamide Dehydrogenases of Advenella mimigardefordensis and Ralstonia eutropha Catalyze Cleavage of 3,3′-Dithiodipropionic Acid into 3-Mercaptopropionic Acid ▿ †

Science.gov (United States)

Wübbeler, Jan Hendrik; Raberg, Matthias; Brandt, Ulrike; Steinbüchel, Alexander

2010-01-01

The catabolism of the disulfide 3,3′-dithiodipropionic acid (DTDP) is initiated by the reduction of its disulfide bond. Three independent Tn5::mob-induced mutants of Advenella mimigardefordensis strain DPN7T were isolated that had lost the ability to utilize DTDP as the sole source of carbon and energy and that harbored the transposon insertions in three different sites of the same dihydrolipoamide dehydrogenase gene encoding the E3 subunit of the pyruvate dehydrogenase multi-enzyme complex of this bacterium (LpdAAm). LpdAAm was analyzed in silico and compared to homologous proteins, thereby revealing high similarities to the orthologue in Ralstonia eutropha H16 (PdhLRe). Both bacteria are able to cleave DTDP into two molecules of 3-mercaptopropionic acid (3MP). A. mimigardefordensis DPN7T converted 3MP to 3-sulfinopropionic acid, whereas R. eutropha H16 showed no growth with DTDP as the sole carbon source but was instead capable of synthesizing heteropolythioesters using the resulting cleavage product 3MP. Subsequently, the genes lpdAAm and pdhLRe were cloned, heterologously expressed in Escherichia coli applying the pET23a expression system, purified, and assayed by monitoring the oxidation of NADH. The physiological substrate lipoamide was reduced to dihydrolipoamide with specific activities of 1,833 mkat/kg of protein (LpdAAm) or 1,667 mkat/kg of protein (PdhLRe). Reduction of DTDP was also unequivocally detected with the purified enzymes, although the specific enzyme activities were much lower: 0.7 and 0.5 mkat/kg protein, respectively. PMID:20833784

14 CFR 91.517 - Passenger information.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Passenger information. 91.517 Section 91... Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.517 Passenger information. (a) Except as... belts and when smoking is prohibited. (c) If passenger information signs are installed, no passenger or...

Spectroscopic observations of the supernova remnant candidates 3 C 400.2 and S91

International Nuclear Information System (INIS)

Sabbadin, F.; D'Odorico, S.

1976-01-01

Spectra of 3 C 400.2 and S 91 have been used to measure the emission line rations Hα/N II region, Hα/ SII region and 6,717/6,731 of S II region in the two nebulae. By comparing the measured ratios with the mean values observed in supernova remnants, in planetary nebulae und in glactic H II regions, it is possible to conclude that the two nebulae are the result of supernova explosions. For S 91, previously catalogued as an H II region, we derive a linear diameter of 34 pc and a distance of 0.7 kpc using a relation between the diameter of supernova remnants and the average Hα/ N II region intensity ratio in their optical filaments. (orig.) [de

Dicty_cDB: Contig-U11322-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available 0 CP001389_3336( CP001389 |pid:none) Rhizobium sp. NGR234, complete ... 39 0.50 AB471639_28( AB471639 |pid:none) Desulfotignum baltic...um genomic DN... 39 0.50 CP000092_304( CP000092 |pid:none) Ralstonia eutropha JMP13

Clinical implication of long noncoding RNA 91H expression profile in osteosarcoma patients

Directory of Open Access Journals (Sweden)

Xia WK

2016-07-01

Full Text Available Wen-Kai Xia,1 Qing-Feng Lin,2 Dong Shen,2 Zhi-Li Liu,2 Jun Su,2 Wei-Dong Mao2 1Department of Nephrology, 2Department of Oncology, The Affiliated Jiangyin Hospital, School of Medicine, Southeast University, Jiangyin, Jiangsu, People’s Republic of China Abstract: Long noncoding RNAs have been documented as having widespread roles in carcinogenesis and cancer progression. However, roles of long noncoding RNAs in osteosarcoma remain unclear. This study is to investigate the clinical relevance and biological functions of long noncoding RNA 91H in osteosarcoma. Herein, we confirmed that 91H expression was notably increased in osteosarcoma patients and cell lines compared to healthy controls and normal human bone cell lines. High expression of 91H was significantly correlated with advanced clinical stage, chemotherapy after surgery, and tumor size >5 cm. Furthermore, 91H was an independent prognostic factor for overall survival in osteosarcoma patients after treatments. Additionally, the knockdown of 91H expression inhibited osteosarcoma cells’ proliferation and promoted their apoptosis in vitro. In summary, these findings indicate that 91H may be a novel biomarker for risk prognostication and also provide a clue to the molecular etiology of osteosarcoma. Keywords: long noncoding RNA, 91H, osteosarcoma, survival

9 CFR 91.3 - General export requirements.

Science.gov (United States)

2010-01-01

... finds such tests are not necessary to prevent the exportation of diseased animals from the United States. (c) Testing. All samples for tests required by §§ 91.5 through 91.13 for exportation of animals under... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false General export requirements. 91.3...

Long-term strength and allowable stresses of grade 10Kh9MFB and X10CrMoVNb9-1 (T91/P91) chromium heat-resistant steels

Science.gov (United States)

Skorobogatykh, V. N.; Danyushevskiy, I. A.; Schenkova, I. A.; Prudnikov, D. A.

2015-04-01

Currently, grade X10CrMoVNb9-1 (T91, P91) and 10Kh9MFB (10Kh9MFB-Sh) chromium steels are widely applied in equipment manufacturing for thermal power plants in Russia and abroad. Compilation and comparison of tensile, impact, and long-term strength tests results accumulated for many years of investigations of foreign grade X10CrMoVNb9-1, T91, P91, and domestic grade 10Kh9MFB (10Kh9MFB-Sh) steels is carried out. The property identity of metals investigated is established. High strength and plastic properties of steels, from which pipes and other products are made, for operation under creep conditions are confirmed. Design characteristics of long-term strength on the basis of tests with more than one million of hour-samples are determined ( and at temperatures of 500-650°C). The table of recommended allowable stresses for grade 10Kh9MFB, 10Kh9MFB-SH, X10CrMoVNb9-1, T91, and P91 steels is developed. The long-time properties of pipe welded joints of grade 10Kh9MFB+10Kh9MFB, 10Kh9MFB-Sh+10Kh9MFB-Sh, X10CrMoVNb9-1+X10CrMoVNb9-1, P91+P91, T91+T91, 10Kh9MFB (10Kh9MFB-Sh)+X10CrMoVNb9-1(T/P91) steels is researched. The welded joint reduction factor is experimentally determined.

[Comparative characteristics of the amino acid composition of the protein fractions of the hydrogen bacteria Hydrogenomonas eutropha in meat and wheat].

Science.gov (United States)

Barashkov, V A; Trubachev, I N; Gitel'zon, I I

1976-01-01

An attempt was made to compare the biological value of the biological mass of the hydrogen bacteria Tydrogenomas eutropha, of meat and wheat on the ground of the fractional and amino acids composition of their proteins. Substantial differences in the distribution of proteins and amino acids in all of the three objects examined were revealed. It is shown that more than one half of the entire protein contained in the biological mass of the hydrogen bacteria is made up of poorly soluble structural proteins difficultly amenable to the action of digestive enzymes. It is this fraction where the bulk of essential amino acids is concentrated. The data obtained imply that the biological value of the biological mass of hydrogen bacteria is higher than in wheat, but lower than in meat.

Preparation and corrosion resistance of electroless Ni-P/SiC functionally gradient coatings on AZ91D magnesium alloy

Science.gov (United States)

Wang, Hui-Long; Liu, Ling-Yun; Dou, Yong; Zhang, Wen-Zhu; Jiang, Wen-Feng

2013-12-01

In this paper, the protective electroless Ni-P/SiC gradient coatings on AZ91D magnesium alloy substrate were successfully prepared. The prepared Ni-P/SiC gradient coatings were characterized for its microstructure, morphology, microhardness and adhesion to the substrate. The deposition reaction kinetics was investigated and an empirical rate equation for electroless Ni-P/SiC plating on AZ91D magnesium alloy was developed. The anticorrosion properties of the Ni-P/SiC gradient coatings in 3.5 wt.% NaCl solution were evaluated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) studies. The potentiodynamic polarization measurements revealed that the SiC concentration in the bath and heat treatment can influence the corrosion protection performance of electroless deposited Ni-P/SiC gradient coatings. EIS studies indicated that higher charge transfer resistance and slightly lower capacitance values were obtained for Ni-P/SiC gradient coatings compared to Ni-P coatings. The corrosion resistance of the Ni-P/SiC gradient coatings increases initially and decreases afterwards with the sustained increasing of immersion time in the aggressive medium. The electroless Ni-P/SiC gradient coatings can afford better corrosion protection for magnesium alloy substrate compared with Ni-P coatings.

Comparative proteome analysis reveals four novel polyhydroxybutyrate (PHB) granule-associated proteins in Ralstonia eutropha H16.

Science.gov (United States)

Sznajder, Anna; Pfeiffer, Daniel; Jendrossek, Dieter

2015-03-01

Identification of proteins that were present in a polyhydroxybutyrate (PHB) granule fraction isolated from Ralstonia eutropha but absent in the soluble, membrane, and membrane-associated fractions revealed the presence of only 12 polypeptides with PHB-specific locations plus 4 previously known PHB-associated proteins with multiple locations. None of the previously postulated PHB depolymerase isoenzymes (PhaZa2 to PhaZa5, PhaZd1, and PhaZd2) and none of the two known 3-hydroxybutyrate oligomer hydrolases (PhaZb and PhaZc) were significantly present in isolated PHB granules. Four polypeptides were found that had not yet been identified in PHB granules. Three of the novel proteins are putative α/β-hydrolases, and two of those (A0671 and B1632) have a PHB synthase/depolymerase signature. The third novel protein (A0225) is a patatin-like phospholipase, a type of enzyme that has not been described for PHB granules of any PHB-accumulating species. No function has been ascribed to the fourth protein (A2001), but its encoding gene forms an operon with phaB2 (acetoacetyl-coenzyme A [CoA] reductase) and phaC2 (PHB synthase), and this is in line with a putative function in PHB metabolism. The localization of the four new proteins at the PHB granule surface was confirmed in vivo by fluorescence microscopy of constructed fusion proteins with enhanced yellow fluorescent protein (eYFP). Deletion of A0671 and B1632 had a minor but detectable effect on the PHB mobilization ability in the stationary growth phase of nutrient broth (NB)-gluconate cells, confirming the functional involvement of both proteins in PHB metabolism. Copyright © 2015, American Society for Microbiology. All Rights Reserved.

Al-TiC in situ composite coating fabricated by low power pulsed laser cladding on AZ91D magnesium alloy

Science.gov (United States)

Yang, Liuqing; Li, Zhiyong; Zhang, Yingqiao; Wei, Shouzheng; Liu, Fuqiang

2018-03-01

Al + (Ti + B4C) composite coating was cladded on AZ91D magnesium alloy by a low power pulsed Nd-YAG laser. The Ti+B4C mixed powder is with the ratio of Ti: B4C = 5:1, which was then mixed with Al powder by weight fraction of 10%, 15% and 20%, respectively. Scanning electron microscopy, energy dispersive spectrometer and X-ray diffraction were used to study the microstructure, chemical composition and phase composition of the coating. Results showed that the coating had satisfied metallurgical bonding with the magnesium substrate. Al3Mg2, Al12Mg17, Al3Ti and TiC were formed by in-situ reaction. The coatings have micro-hardness of 348HV, which is about 5-6 times higher than that of AZ91D. The wear resistance and corrosion resistance of the coatings are enhanced with the addition of the mixed powder.

Effect of heat treatment and number of passes on the microstructure and mechanical properties of friction stir processed AZ91C magnesium alloy

Energy Technology Data Exchange (ETDEWEB)

Dadashpour, M.; Yeşildal, R. [University of Ataturk, Erzurum (Turkmenistan); Mostafapour, A.; Rezazade, V. [University of Tabriz, Tabriz (Iran, Islamic Republic of)

2016-02-15

In this paper, the effect of heat treatment and number of passes on microstructure and mechanical properties of friction stir processed AZ91C magnesium alloy samples were investigated. From six samples of as-cast AZ91C magnesium alloy, three plates were pre-heated at temperature of 375°C for 3 hours, and then were treated at temperature of 415°C for 18 hours and finally were cooled down in air. Three plates were relinquished without heat treatment. 8 mm thick as-cast AZ91C magnesium alloy plates were friction stir processed at constant traverse speed of 40 mm/min and tool rotation speed of 1250 rpm. After process, microstructural characterization of samples was analyzed using optical microscopy and tensile and Vickers hardness tests were performed. It was found that heat treated samples had finer grains, higher hardness, improved tensile strength and elongation relative to non-heat treated ones. As the number of passes increased, higher UTS and TE were achieved due to finer grains and more dissolution of β phase (Mg17Al12). The micro-hardness characteristics and tensile improvement of the friction stir processed samples depend significantly on grain size, removal of voids and porosities and dissolution of β phase in the stir zone.

29 CFR 1915.91 - Housekeeping.

Science.gov (United States)

2010-07-01

... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR SHIPYARD EMPLOYMENT General Working Conditions § 1915.91... present a hazard to employees. (c) Slippery conditions on walkways or working surfaces shall be eliminated...

Microstructure and Aging Behavior of Nonflammable AZ91D Mg Alloy

OpenAIRE

Seok Hong Min; Tae Kwon Ha

2014-01-01

Phase equilibria of AZ91D Mg alloys for nonflammable use, containing Ca and Y, were carried out by using FactSage® and FTLite database, which revealed that solid solution treatment could be performed at temperatures from 400 to 450oC. Solid solution treatment of AZ91D Mg alloy without Ca and Y was successfully conducted at 420oC and supersaturated microstructure with all beta phase resolved into matrix was obtained. In the case of AZ91D Mg alloy with some Ca and Y; howeve...

40 CFR 91.603 - Applicability of part 91, subpart F.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Applicability of part 91, subpart F. 91.603 Section 91.603 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... best of (Company Name) knowledge, true and accurate. I am aware of the penalties associated with...

Effect of ferrocene-substituted porphyrin RL-91 on Candida albicans biofilm formation.

Science.gov (United States)

Lippert, Rainer; Vojnovic, Sandra; Mitrovic, Aleksandra; Jux, Norbert; Ivanović-Burmazović, Ivana; Vasiljevic, Branka; Stankovic, Nada

2014-08-01

Ferrocene-substituted porphyrin RL-91 exhibits antifungal activity against opportune human pathogen Candida albicans. RL-91 efficiently inhibits growth of both planktonic C. albicans cells and cells within biofilms without photoactivation. The minimal inhibitory concentration for plankton form (PMIC) was established to be 100 μg/mL and the same concentration killed 80% of sessile cells in the mature biofilm (SMIC80). Furthermore PMIC of RL-91 efficiently prevents C. albicans biofilm formation. RL-91 is cytotoxic for human fibroblasts in vitro in concentration of 10 μg/mL, however it does not cause hemolysis in concentrations of up to 50 μg/mL. These findings open possibility for application of RL-91 as an antifungal agent for external antibiofilm treatment of medical devices as well as a scaffold for further development of porphyrin based systemic antifungals. Copyright © 2014 Elsevier Ltd. All rights reserved.

G protein-coupled receptor 91 signaling in diabetic retinopathy and hypoxic retinal diseases.

Science.gov (United States)

Hu, Jianyan; Li, Tingting; Du, Xinhua; Wu, Qiang; Le, Yun-Zheng

2017-10-01

G protein-coupled receptor 91 (GPR91) is a succinate-specific receptor and activation of GPR91 could initiate a complex signal transduction cascade and upregulate inflammatory and pro-angiogenic cytokines. In the retina, GPR91 is predominately expressed in ganglion cells, a major cellular entity involved in the pathogenesis of diabetic retinopathy (DR) and other hypoxic retinal diseases. During the development of DR and retinopathy of prematurity (ROP), chronic hypoxia causes an increase in the levels of local succinate. Succinate-mediated GPR91 activation upregulates vascular endothelial growth factor (VEGF) through ERK1/2-C/EBP β (c-Fos) and/or ERK1/2-COX-2/PGE2 signaling pathways, which in turn, leads to the breakdown of blood-retina barriers in these disorders. In this review, we will have a brief introduction of GPR91 and its biological functions and a more detailed discussion about the role and mechanisms of GPR91 in DR and ROP. A better understanding of GPR91 regulation may be of great significance in identifying new biomarkers and drug targets for the prediction and treatment of DR, ROP, and hypoxic retinal diseases. Copyright © 2017 Elsevier Ltd. All rights reserved.

Finite element modelling of the creep deformation of T91 steel weldments at 600 C

Energy Technology Data Exchange (ETDEWEB)

Bhadrui, A.K. [Indira Gandhi Centre for Atomic Research, Kalpakkam (India); Gaudig, W. [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt; Theofel, H. [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt; Maile, K. [Stuttgart Univ. (Germany). Staatliche Materialpruefungsanstalt

1996-05-01

Finite element modelling of the creep deformation of T91 steel weldments, welded using the manual metal arc (MMA) and submerged arc (SA) welding processes, was carried out to predict creep curves for both of the weldments under different stresses and compared with the experimental data. The stress and strain redistribution across the length of the transverse-weld specimens has also been predicted. Data of creep tests at 600 C at stresses between 90-130 MPa for the base metal, the MMA and SA weld metals, and the simulated heat-affected zone were used to determine Garofalo`s equation for creep strain. Finite element meshes for both of the weldments were constructed after calculating the HAZ locations using Rosenthal`s heat flow equation. (orig.)

Prognostic implications of plasma fibrinogen and serum C- reactive ...

African Journals Online (AJOL)

reactive protein levels in non-small cell lung cancer resection and ... Abstract. Purpose: To investigate the prognostic implications of plasma fibrinogen and serum C-reactive protein ... The possibility of complete resection and associated findings are reported. Results: ... operable using pre-operative chemotherapy and/or ...

40 CFR 91.329 - Catalyst thermal stress test.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Catalyst thermal stress test. 91.329....329 Catalyst thermal stress test. (a) Oven characteristics. The oven used for termally stressing the test catalyst must be capable of maintaining a temperature of 500 ±5 °C and 1000 ±10 °C. (b) Evaluation...

40 CFR 91.115 - Certification procedure-determining engine power and engine families.

Science.gov (United States)

2010-07-01

... engine power and engine families. 91.115 Section 91.115 Protection of Environment ENVIRONMENTAL... engine power and engine families. (a) Engine power must be calculated using SAE J1228. This procedure has... engine families as specified by paragraph (c) of this section, comprised of engines expected to have...

Metabolic engineering of Saccharomyces cerevisiae for the production of n-butanol

Energy Technology Data Exchange (ETDEWEB)

Steen, EricJ.; Chan, Rossana; Prasad, Nilu; Myers, Samuel; Petzold, Christopher; Redding, Alyssa; Ouellet, Mario; Keasling, JayD.

2008-11-25

BackgroundIncreasing energy costs and environmental concerns have motivated engineering microbes for the production of ?second generation? biofuels that have better properties than ethanol.Results& ConclusionsSaccharomyces cerevisiae was engineered with an n-butanol biosynthetic pathway, in which isozymes from a number of different organisms (S. cerevisiae, Escherichia coli, Clostridium beijerinckii, and Ralstonia eutropha) were substituted for the Clostridial enzymes and their effect on n-butanol production was compared. By choosing the appropriate isozymes, we were able to improve production of n-butanol ten-fold to 2.5 mg/L. The most productive strains harbored the C. beijerinckii 3-hydroxybutyryl-CoA dehydrogenase, which uses NADH as a co-factor, rather than the R. eutropha isozyme, which uses NADPH, and the acetoacetyl-CoA transferase from S. cerevisiae or E. coli rather than that from R. eutropha. Surprisingly, expression of the genes encoding the butyryl-CoA dehydrogenase from C. beijerinckii (bcd and etfAB) did not improve butanol production significantly as previously reported in E. coli. Using metabolite analysis, we were able to determine which steps in the n-butanol biosynthetic pathway were the most problematic and ripe for future improvement.

40 CFR 265.91 - Ground-water monitoring system.

Science.gov (United States)

2010-07-01

... this paragraph. (b) Separate monitoring systems for each waste management component of a facility are... which circumscribes the several waste management components. (c) All monitoring wells must be cased in a... Section 265.91 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID WASTES...

Recommendations for joint fatigue coefficients for welded P91 junctions at 550 °C

Energy Technology Data Exchange (ETDEWEB)

Matheron, P., E-mail: philippe.matheron@cea.fr; Aiello, G.; Ancelet, O.; Forest, L.

2016-04-15

Modified 9Cr1Mo steels are potential candidates as structural materials of GEN-IV nuclear reactors. Since the design of structural components is influenced by the presence of the welds, their mechanical properties are also included in the design codes. In the European code RCC-MRx, a weld is considered as a homogeneous (base metal) component with a margin coefficient, called weld coefficient. Currently no values of joint fatigue coefficients for P91 junctions are given in RCC-MRx. After a recall of the weld design rules contained in the code, this work presents the experimental activities carried out to characterize the fatigue behaviour of TIG welded P91 junctions at high temperatures. Finite elements calculations were performed on the basis of the characterization of the base and weld metal. The results of the tests validate the numerical results. Values of the weld joint fatigue coefficients for P91 are proposed for possible inclusion in RCC-MRx.

Alpha-heavy-ion angular correlations from /sup 28/Si + /sup 12/C. [84 to 91. 5 MeV

Energy Technology Data Exchange (ETDEWEB)

Ost, R; Cole, A J [Institut des Sciences Nucleaires, 38 - Grenoble (France); Clover, M R; Fulton, B R; Sikora, B [Rochester Univ., NY (USA). Nuclear Structure Research Lab.

1980-06-01

Alpha particles have been measured in coincidence with heavy recoil nuclei from the /sup 28/Si + /sup 12/C reaction. At Esub(lab) = 87 MeV angular correlations for alphas between 15/sup 0/ and 55/sup 0/ and heavy ions at angles -9/sup 0/, -12/sup 0/ and -15/sup 0/ have been taken. An excitation function of coincidence events with THETAsub(..cap alpha..) = 30/sup 0/ and THETAsub(HI) = -12/sup 0/ has been measured for 84 MeV < Esub(lab) < 91.5 MeV. The results are well described by a statistical-model calculation for compound nucleus decay. No evidence is found for additional processes.

Formation and mechanism of nanocrystalline AZ91 powders during HDDR processing

Energy Technology Data Exchange (ETDEWEB)

Liu, Yafen; Fan, Jianfeng, E-mail: fanjianfeng@tyut.edu.cn; Zhang, Hua; Zhang, Qiang; Gao, Jing; Dong, Hongbiao, E-mail: hd38@leicester.ac.uk; Xu, Bingshe

2017-03-15

Grain sizes of AZ91 alloy powders were markedly refined to about 15 nm from 100 to 160 μm by an optimized hydrogenation-disproportionation-desorption-recombination (HDDR) process. The effect of temperature, hydrogen pressure and processing time on phase and microstructure evolution of AZ91 alloy powders during HDDR process was investigated systematically by X-ray diffraction, optical microscopy, scanning electron microscopy and transmission electron microscopy, respectively. The optimal HDDR process for preparing nanocrystalline Mg alloy powders is hydriding at temperature of 350 °C under 4 MPa hydrogen pressure for 12 h and dehydriding at 350 °C for 3 h in vacuum. A modified unreacted core model was introduced to describe the mechanism of grain refinement of during HDDR process. - Highlights: • Grain size of the AZ91 alloy powders was significantly refined from 100 μm to 15 nm. • The optimal HDDR technology for nano Mg alloy powders is obtained. • A modified unreacted core model of grain refinement mechanism was proposed.

Formation of alumina-aluminide coatings on ferritic-martensitic T91 steel

Directory of Open Access Journals (Sweden)

Choudhary R.K.

2014-01-01

Full Text Available In this work, alumina-aluminide coatings were formed on ferritic-martensitic T91 steel substrate. First, coatings of aluminum were deposited electrochemically on T91 steel in a room temperature AlCl3-1-ethyl-3-methyl imidazolium chloride ionic liquid, then the obtained coating was subjected to a two stage heat treatment procedure consisting of prolonged heat treatment of the sample in vacuum at 300 ○C followed by oxidative heat treatment in air at 650 ○C for 16 hours. X-ray diffraction measurement of the oxidatively heat treated samples indicated formation of Fe-Al and Cr-Al intermetallics and presence of amorphous alumina. Energy dispersive X-ray spectroscopy measurement confirmed 50 wt- % O in the oxidized coating. Microscratch adhesion test conducted on alumina-aluminide coating formed on T91 steel substrate showed no major adhesive detachment up to 20 N loads. However, adhesive failure was observed at a few discrete points on the coating along the scratch track.

A Novel Heme Pocket Hemoglobin Variant Associated with Normal Hematology: Hb Zara or α91(FG3)Leu→Ile (α2) (HBA2: c.274C > A).

Science.gov (United States)

Trova, Sandro; Mereu, Paolo; Decandia, Luca; Cocco, Elena; Masala, Bruno; Manca, Laura; Pirastru, Monica

2015-08-13

We report a new hemoglobin (Hb) variant on the HBA2 gene, Hb Zara [α91(FG3)Leu→Ile (α2); HBA2: c.274C > A], which was found in a Caucasian man from Croatia. It was observed by routine cation exchange chromatography as an abnormal 21.8% fraction overlapping Hb A 2 , and associated with normal hematology. It was slightly unstable by the standard isopropanol precipitation test. DNA analysis revealed the CTT > ATT mutation at codon 91 on an α2 gene of a normal α-globin gene arrangement. This new variant represents the sixth described mutation at codon α91 and fourth on the α2 locus. As a result of the slight instability due to the significant role of the α91 residue in the α1β2 contact, the level of the Hb Zara variant was lower than levels observed for several stable variants codified by the α2 locus.

91 - 96 Ojo C-reactive protein

African Journals Online (AJOL)

DR. AMIN

Small, P.M., Shafer, R.W. and Hopewell, P.C. (2003). Exogenous re-infection with multidrug resistant. Mycobacterium tuberculosis in patients with advanced HIV infection. Journal of Clinical. Infection. 328:1137-1144. Sobero, R. (2006). Tuberculosis control in Bolivia, Chile,. Colombia and Peru: why does incidence vary so.

7 CFR 91.3 - Authority.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Authority. 91.3 Section 91.3 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections... AND GENERAL INFORMATION Administration § 91.3 Authority. The Deputy Administrator is charged with the...

Creep behavior and evolution of microstructure of modified Grade 91 welded joint after short term exposure at 500 deg C

International Nuclear Information System (INIS)

Vivier, F.

2009-03-01

With the increase in worldwide energy demand, the nuclear industry is a way of producing electricity on a large scale and to answer to this need. For the design of a new generation of fission nuclear reactors and among six chosen fission reactor systems, France develops in particularly the Very High Temperature Reactor (VHTR) concept. This implies the use of materials that are more and more resistant to high temperature for long-term exposure. AREVA focuses on materials already used in fossil-fuel power plant, so that the mechanical behaviour of Grade 91 (Fe 9 Cr 1 MoNbV) has to be investigated. This ferritic-martensitic steel is considered to be a potential candidate for welded components. Such structures are combined with welded joints, which have to be studied. Three industrial partners (AREVA, CEA, EDF) have launched a study with the Centre des Materiaux in order to investigate the creep of welded joint of Grade 91. The aim of this work is to complete the available database about the mechanical behaviour of Grade 91, base metal and welded joint, during creep tests performed at 500 C up to 4500 h exposure. Thermal aging tests, tensile tests, and creep tests were performed at 450 C and 500 C using both base metal and cross-weld samples. Several geometries of cross-weld creep specimens were tested. The microstructure has not remarkably changed after tests concerning both nature and size of precipitates, and the characteristic size of the matrix sub-structure. The creep damage is not developed in the ruptured specimens after creep tests. Only little damage by cavity nucleation and growth was found in the creep specimens. Creep fracture at 500 C takes places by viscoplastic flow, contrary to tests performed at 625 C where the creep-induced damage governs the creep rupture at least for long-term lifetime. From creep curves of base metal and cross-weld specimens, a phenomenological model is proposed. The flow rule is a Norton power law with a stress exponent of 19 in

24 CFR 91.430 - Monitoring.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Monitoring. 91.430 Section 91.430 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development... Plan § 91.430 Monitoring. The consolidated plan must describe the standards and procedures that the...

24 CFR 91.230 - Monitoring.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Monitoring. 91.230 Section 91.230 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development... Consolidated Plan § 91.230 Monitoring. The plan must describe the standards and procedures that the...

24 CFR 91.330 - Monitoring.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Monitoring. 91.330 Section 91.330 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development... Consolidated Plan § 91.330 Monitoring. The consolidated plan must describe the standards and procedures that...

40 CFR 91.1305 - Banking.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Banking. 91.1305 Section 91.1305 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES In-Use Credit Program for New Marine Engines § 91.1305 Banking...

Microstructural characterization of second phases in X10CrMoVNb9-1 and 12CrMoWCuVNb steels after long steam exposure time at 550 C

International Nuclear Information System (INIS)

Rodak, Kinga; Hernas, Adam; Vodarek, Vlastimil

2015-01-01

Microstructural changes in high alloy (9-12% Cr) creep resistant martensitic X10CrMoVNb9-1 and 12CrMoW . CuVNb steels after 100 000 h of steam exposure at 550 C have been studied using scanning transmission electron microscopy. Precipitates were identified using electron diffraction patterns and energy dispersive X-ray spectroscopy analysis. After long time exposure, a significant coarsening of M 23 C 6 carbides, and intensive precipitation of the coarse Laves phase were observed. Moreover, in the 12CrMoW . CuVNb steel, a low amount of the modified Z-phase particles was detected. The microstructures of the X10Cr . MoVNb9-1 and 12CrMoWCuVNb steels after 100 000 h of exposure differ in several aspects.

Microstructural characterization of second phases in X10CrMoVNb9-1 and 12CrMoWCuVNb steels after long steam exposure time at 550 C

Energy Technology Data Exchange (ETDEWEB)

Rodak, Kinga; Hernas, Adam [Silesian Univ. of Technology, Inst. of Materials Science, Katowice (Poland); Vodarek, Vlastimil [VSB-Technical Univ. of Ostrava (Czech Republic)

2015-07-15

Microstructural changes in high alloy (9-12% Cr) creep resistant martensitic X10CrMoVNb9-1 and 12CrMoW . CuVNb steels after 100 000 h of steam exposure at 550 C have been studied using scanning transmission electron microscopy. Precipitates were identified using electron diffraction patterns and energy dispersive X-ray spectroscopy analysis. After long time exposure, a significant coarsening of M{sub 23}C{sub 6} carbides, and intensive precipitation of the coarse Laves phase were observed. Moreover, in the 12CrMoW . CuVNb steel, a low amount of the modified Z-phase particles was detected. The microstructures of the X10Cr . MoVNb9-1 and 12CrMoWCuVNb steels after 100 000 h of exposure differ in several aspects.

40 CFR 61.91 - Definitions.

Science.gov (United States)

2010-07-01

... included. The method for calculating effective dose equivalent and the definition of reference man are... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Definitions. 61.91 Section 61.91... Other Than Radon From Department of Energy Facilities § 61.91 Definitions. As used in this subpart, all...

9 CFR 381.91 - Contamination.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Contamination. 381.91 Section 381.91... § 381.91 Contamination. (a) Carcasses of poultry contaminated by volatile oils, paints, poisons, gases... station away from the main processing line, by any method that will remove the contamination, such as...

40 CFR 91.205 - Banking.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Banking. 91.205 Section 91.205... EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Averaging, Banking, and Trading Provisions § 91.205 Banking. (a... banking. (i) For outboard engines in model year (MY) 1997, a manufacturer may bank positive emission...

Interaction Research on the Antiviral Molecule Dufulin Targeting on Southern Rice Black Streaked Dwarf Virus P9-1 Nonstructural Protein

Directory of Open Access Journals (Sweden)

Zhenchao Wang

2015-03-01

Full Text Available ern rice black streaked dwarf virus (SRBSDV causes severe harm to rice production. Unfortunately, studies on effective antiviral drugs against SRBSDV and interaction mechanism of antiviral molecule targeting on SRBSDV have not been reported. This study found dufulin (DFL, an ideal anti-SRBSDV molecule, and investigated the interactions of DFL targeting on the nonstructural protein P9-1. The biological sequence information and bonding characterization of DFL to four kinds of P9-1 protein were described with fluorescence titration (FT and microscale thermophoresis (MST assays. The sequence analysis indicated that P9-1 had highly-conserved C- and N-terminal amino acid residues and a hypervariable region that differed from 131 aa to 160 aa. Consequently, wild-type (WT-His-P9-1, 23 C-terminal residues truncated (TR-ΔC23-His-P9-1, 6 N-terminal residues truncated (TR-ΔN6-His-P9-1, and Ser138 site-directed (MU-138-His-P9-1 mutant proteins were expressed. The FT and MST assay results indicated that DFL bounded to WT-His-P9-1 with micromole affinity and the 23 C-terminal amino acids were the potential targeting site. This system, which combines a complete sequence analysis, mutant protein expression, and binding action evaluating system, could further advance the understanding of the interaction abilities between antiviral drugs and their targets.

40 CFR 91.206 - Trading.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Trading. 91.206 Section 91.206... EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Averaging, Banking, and Trading Provisions § 91.206 Trading. (a... manufacturers in trading. These credits must be used in the same averaging set as generated. (b) Credits for...

40 CFR 91.1306 - Trading.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Trading. 91.1306 Section 91.1306... EMISSIONS FROM MARINE SPARK-IGNITION ENGINES In-Use Credit Program for New Marine Engines § 91.1306 Trading... engine manufacturers through trading. (b) In-use credits for trading can be obtained from credits banked...

31 CFR 91.10 - Photographs.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Photographs. 91.10 Section 91.10 Money and Finance: Treasury Regulations Relating to Money and Finance REGULATIONS GOVERNING CONDUCT IN OR ON THE BUREAU OF THE MINT BUILDINGS AND GROUNDS § 91.10 Photographs. The taking of photographs on...

Internal friction studies on dynamic strain aging in P91 ferritic steel

International Nuclear Information System (INIS)

Zhou, Hongwei; Fang, Junfei; Chen, Yan; Yang, Lei; Zhang, Hui; Lu, Yun; He, Yizhu

2016-01-01

The temperature of dynamic strain aging (DSA) regime in P91 steel is between 523 K and 773 K. The activation energy (Q) for onset of DSA is 73 kJ/mol, while that for finale of DSA is 202 kJ/mol. Two main Internal friction (IF) speaks were observed, Snoek and SKK with the activation energy of 67.9 kJ/mol and 121 kJ/mol, respectively. IF shows that activation energy of 73 kJ/mol is equal to that of C atom body diffusion in α-Fe, and 202 kJ/mol is equal to binding energy between C atoms and moving dislocations. These results confirm that the mechanism of DSA can be explained by the diffusion of C atoms and pinning between C and moving dislocation. These investigations indicate that DSA in P91 steel is resulted from C atom diffusion, instead of Cr or Mo atoms.

31 CFR 91.1 - Authority.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Authority. 91.1 Section 91.1 Money... THE BUREAU OF THE MINT BUILDINGS AND GROUNDS § 91.1 Authority. The regulations in this part governing....S. Bullion Depository, West Point, New York; are promulgated pursuant to the authority vested in the...

45 CFR 91.43 - Mediation.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 1 2010-10-01 2010-10-01 false Mediation. 91.43 Section 91.43 Public Welfare... Enforcement Procedures § 91.43 Mediation. (a) HHS will promptly refer to a mediation agency designated by the... mediation process to the extent necessary to reach an agreement or make an informed judgment that an...

31 CFR 91.7 - Gambling.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Gambling. 91.7 Section 91.7 Money and... BUREAU OF THE MINT BUILDINGS AND GROUNDS § 91.7 Gambling. (a) Participating in games for money or other property, the operation of gambling devices, the conduct of a lottery or pool, the selling or purchasing of...

Effect of M{sub 3}C on the precipitation behavior of M{sub 23}C{sub 6} phase during early stage of tempering in T91 ferritic steel

Energy Technology Data Exchange (ETDEWEB)

Liu, Chenxi; Liu, Yongchang; Zhang, Dantian; Ning, Baoqun; Yan, Zesheng [School of Material Science and Engineering, Tianjin Key Laboratory of Advanced Jointing Technology, Tianjin University, Tianjin (China)

2011-12-15

Tempered martensitic structure is the service condition of T91 ferritic steel after adopting the austenitizing followed by tempering. Needle-like M{sub 3}C particles are precipitated during air cooling after austenization, while the precipitation of M{sub 3}C is suppressed during the water cooling. The effect of existence of M{sub 3}C on the precipitation behaviors of M{sub 23}C{sub 6} during the early stage of tempering, as nucleation site, number density and size distribution, was investigated by means of TEM observation. The TEM results indicate that, upon the same tempering time, the size of M{sub 23}C{sub 6} is smaller and its number density is higher in the sample pre-existing M{sub 3}C than in the sample without M{sub 3}C. This can be explained that existence of M{sub 3}C results in more M{sub 23}C{sub 6} precipitates forming inside of grain, where a relatively low self-diffusion coefficient of alloy element leads to M{sub 23}C{sub 6} hardly coarsening. However, with the prolongation of tempering time, this effect becomes weaken. Microhardness results indicate that the existence of M{sub 3}C phase results in the increase of hardness after tempering due to the precipitation of finer and denser M{sub 23}C{sub 6} particles. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Cometabolic degradation of ethyl mercaptan by phenol-utilizing Ralstonia eutropha in suspended growth and gas-recycling trickle-bed reactor.

Science.gov (United States)

Sedighi, Mahsa; Zamir, Seyed Morteza; Vahabzadeh, Farzaneh

2016-01-01

The degradability of ethyl mercaptan (EM), by phenol-utilizing cells of Ralstonia eutropha, in both suspended and immobilized culture systems, was investigated in the present study. Free-cells experiments conducted at EM concentrations ranging from 1.25 to 14.42 mg/l, showed almost complete removal of EM at concentrations below 10.08 mg/l, which is much higher than the maximum biodegradable EM concentration obtained in experiments that did not utilize phenol as the primary substrate, i.e. 2.5 mg/l. The first-order kinetic rate constant (kSKS) for EM biodegradation by the phenol-utilizing cells (1.7 l/g biomass/h) was about 10 times higher than by cells without phenol utilization. Immobilized-cells experiments performed in a gas recycling trickle-bed reactor packed with kissiris particles at EM concentrations ranging from 1.6 to 36.9 mg/l, showed complete removal at all tested concentrations in a much shorter time, compared with free cells. The first-order kinetic rate constant (rmaxKs) for EM utilization was 0.04 l/h for the immobilized system compared to 0.06 for the suspended-growth culture, due to external mass transfer diffusion. Diffusion limitation was decreased by increasing the recycling-liquid flow rate from 25 to 65 ml/min. The removed EM was almost completely mineralized according to TOC and sulfate measurements. Shut down and starvation experiments revealed that the reactor could effectively handle the starving conditions and was reliable for full-scale application. Copyright © 2015 Elsevier Ltd. All rights reserved.

9 CFR 91.6 - Goats.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Goats. 91.6 Section 91.6 Animals and... EXPORTATION Diagnostic Tests, Treatments § 91.6 Goats. (a) In order to be eligible for export, goats shall be...) Tuberculosis. All goats over 1 month of age shall be negative to a caudal intradermal tuberculin test using 0.1...

Fatigue characteristics of sand-cast AZ91D magnesium alloy

Directory of Open Access Journals (Sweden)

Zhenming Li

2017-03-01

Full Text Available The fatigue characteristics of the AZ91D-T6 alloy samples taken from engine blocks have been investigated at 20 °C and elevated temperature (150 °C. The fatigue strength and cyclic stress amplitude of the alloy significantly decrease with the increase of the test temperature, although cyclic hardening occurs continuously until failure for both temperatures. With the increase of the temperature, the decreased fatigue life of the alloy tested at the same stress amplitude is mainly attributed to the decreased matrix strength and the increased hysteresis energies. Fatigue failure of the engine blocks made of AZ91D-T6 alloy is mainly controlled by casting defects. For the defect-free specimens, the crack initiation behavior is determined by the single-slip (20 °C and by environment-assisted cyclic slip (150 °C during fatigue, respectively. The low-cycle fatigue lives of the alloy can be predicted using the Coffin-Manson relation and Basquin laws, the three-parameter equation and the energy-based concepts, while the high-cycle fatigue lives of the alloy fitted well with the developed long crack life model and MSF life models.

14 CFR 33.91 - Engine system and component tests.

Science.gov (United States)

2010-01-01

... AIRWORTHINESS STANDARDS: AIRCRAFT ENGINES Block Tests; Turbine Aircraft Engines § 33.91 Engine system and..., reliability, and durability. (c) Each unpressurized hydraulic fluid tank may not fail or leak when subjected... hydraulic fluid tank must meet the requirements of § 33.64. (d) For an engine type certificated for use in...

Experimental study of 99Tcm-HL91 and 99Tcm-MIBI in mice bearing Lewis lung cancer

International Nuclear Information System (INIS)

Han Chunqi; Li Yaming; Ren Yangang; Yi Lijie

2000-01-01

Objective: To evaluate the ability of detecting lung cancer by 99 Tc m -HL91 and 99 Tc m -MIBI in mice bearing Lewis lung cancer. Methods: Four model mice underwent whole body planar imaging at 2 h, 4 h after injection of 99 Tc m -MIBI; four mice underwent whole body planar imaging at 2 h and 4 h after injection of 99 Tc m -HL91, and the mice of the 99 Tc m -HL91 group were then killed, the tumor, blood and organs were removed, weighted and the radioactivity was measured. ROIs were drawn around the tumor, head and chest in whole body planar images, and radioactivity ratios of tumor to head (T/H), chest (T/C) and contralateral limbs (T/L) were calculated. Results: No significant tumor radioactivity in 2 h and 4 h images of 99 Tc m -MIBI mice (T/C: 0.20 +- 0.08 and 0.14 +- 0.07) was found; increased tumor radioactivity was identified in images of 99 Tc m -HL91 mice (T/C: 3.25 +- 1.25 and 2.44 +- 1.07), and there was significant difference (t = 4.8 - 7.5, P 99 Tc m -HL91 in tumor tissue of mice is higher and clearance rate is slower. 99 Tc m -HL91 is a valuable tumor imaging agent for clinical diagnosis for the cancer

Construction of heterologous gene expression cassettes for the development of recombinant Clostridium beijerinckii.

Science.gov (United States)

Oh, Young Hoon; Eom, Gyeong Tae; Kang, Kyoung Hee; Joo, Jeong Chan; Jang, Young-Ah; Choi, Jae Woo; Song, Bong Keun; Lee, Seung Hwan; Park, Si Jae

2016-04-01

Gene-expression cassettes for the construction of recombinant Clostridium beijerinckii were developed as potential tools for metabolic engineering of C. beijerinckii. Gene expression cassettes containing ColE1 origin and pAMB origin along with the erythromycin resistance gene were constructed, in which promoters from Escherichia coli, Lactococcus lactis, Ralstonia eutropha, C. acetobutylicum, and C. beijerinckii are examined as potential promoters in C. beijerinckii. Zymogram analysis of the cell extracts and comparison of lipase activities of the recombinant C. beijerinckii strains expressing Pseudomonas fluorescens tliA gene suggested that the tliA gene was functionally expressed by all the examined promoters with different expression level. Also, recombinant C. beijerinckii expressing C. beijerinckii secondary alcohol dehydrogenase by the constructed expression cassettes successfully produced 2-propanol from glucose. The best promoter for TliA expression was the R. eutropha phaP promoter while that for 2-propanol production was the putative C. beijerinckii pta promoter. Gene expression cassettes developed in this study may be useful tools for the construction of recombinant C. beijerinckii strains as host strains for the valuable chemicals and fuels from renewable resources.

Assessment of long-term creep strength of grade 91 steel

Energy Technology Data Exchange (ETDEWEB)

Kimura, Kazuhiro; Sawada, Kota; Kushima, Hideaki [National Inst. for Materials Science, Tsukuba, Ibaraki (Japan)

2010-07-01

In 2004 and 2005 long-term creep rupture strength of ASME Grade 91 type steels of plate, pipe, forging and tube materials was evaluated in Japan by means of region splitting analysis method in consideration of 50% of 0.2% offset yield stress. According to the evaluated 100,000h creep rupture strength of 94MPa for plate, pipe and forging steels and 92MPa for tube steel at 600 C, allowable tensile stress of the steels regulated in the Interpretation for the Technical Standard for Thermal Power Plant was slightly reduced. New creep rupture data of the steels obtained in the long-term indicate further reduction of long-term creep rupture strength. Not only creep rupture strength, but also creep deformation property of the ASME Grade 91 steel was investigated and need of reevaluation of long-term creep strength of Grade 91 steel was indicated. A refinement of region splitting analysis method for creep rupture like prediction was discussed. (orig.)

Trends '91: A compendium of data on global change---highlights

International Nuclear Information System (INIS)

Boden, T.A.; Sepanski, R.J.; Stoss, F.W.

1992-03-01

The Carbon Dioxide Information Analysis Center (CDIAC) at Oak Ridge National Laboratory (ORNL) has been prompted to produce the series Trends, a concise inventory of data in response to heightened concern about global environmental issues, in particular climate changes induced by the greenhouse effect. This report contains extracts from Trends '91 to illustrate the content, style, and presentation of data contained in the full 700-page report. This report includes a listing of the investigators contributing data for Trends '91. In addition, it contains the abstract, foreword, and acknowledgments, as well as the introduction and a sample data record from each of the reports's five chapters. The chapters are ''Atmospheric CO 2 ,'' ''Atmospheric CH 4 ,'' ''Other Trace Gases,'' ''CO 2 Emissions,'' and ''Temperature.'' Appendix A provides information about CDIAC and its activities related to global environmental issues. Appendix B lists the contents of the full report. An order form for obtaining a free copy of Trends '91 is found in Appendix C

Mechanical properties of a 316L/T91 weld joint tested in lead-bismuth liquid

International Nuclear Information System (INIS)

Serre, Ingrid; Vogt, Jean-Bernard

2009-01-01

The mechanical strength of T91/316L weld joint assembled by electron beam process is investigated in air and in a liquid lead bismuth bath at 300 and 380 o C using the small punch test. It is shown that the mechanical response in air of the weld joint is similar to that of the T91 base material. The plastic deformation is mainly concentrated in the T91 part of the weld joint which promotes cracking in this material. Testing in liquid lead bismuth bath results in a reduction in ductility and the formation of brittle cracks. The T91/weld interface is found to be rather resistant as it cracks late in the test and after a large crack propagated in the T91 steel.

1 CFR 9.1 - Publication required.

Science.gov (United States)

2010-01-01

... 1 General Provisions 1 2010-01-01 2010-01-01 false Publication required. 9.1 Section 9.1 General Provisions ADMINISTRATIVE COMMITTEE OF THE FEDERAL REGISTER SPECIAL EDITIONS OF THE FEDERAL REGISTER THE UNITED STATES GOVERNMENT MANUAL § 9.1 Publication required. The Director of the Federal Register shall...

14 CFR 91.1107 - Recurrent training.

Science.gov (United States)

2010-01-01

..., as appropriate, including low-altitude windshear training and training on operating during ground... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Recurrent training. 91.1107 Section 91.1107... Management § 91.1107 Recurrent training. (a) Each program manager must ensure that each crewmember receives...

24 CFR 91.415 - Strategic plan.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Strategic plan. 91.415 Section 91... CONSOLIDATED SUBMISSIONS FOR COMMUNITY PLANNING AND DEVELOPMENT PROGRAMS Consortia; Contents of Consolidated Plan § 91.415 Strategic plan. Strategies and priority needs must be described in the consolidated plan...

28 CFR 2.91 - Supervision responsibility.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Supervision responsibility. 2.91 Section 2.91 Judicial Administration DEPARTMENT OF JUSTICE PAROLE, RELEASE, SUPERVISION AND RECOMMITMENT OF PRISONERS, YOUTH OFFENDERS, AND JUVENILE DELINQUENTS District of Columbia Code: Prisoners and Parolees § 2.91 Supervision responsibility. (a) Pursuan...

9 CFR 3.91 - Terminal facilities.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Terminal facilities. 3.91 Section 3.91... Primates 2 Transportation Standards § 3.91 Terminal facilities. (a) Placement. Any persons subject to the... with inanimate cargo or with other animals in animal holding areas of terminal facilities. Nonhuman...

14 CFR 141.91 - Satellite bases.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Satellite bases. 141.91 Section 141.91... OTHER CERTIFICATED AGENCIES PILOT SCHOOLS Operating Rules § 141.91 Satellite bases. The holder of a... assistant chief instructor is designated for each satellite base, and that assistant chief instructor is...

12 CFR 545.91 - Home office.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Home office. 545.91 Section 545.91 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY FEDERAL SAVINGS ASSOCIATIONS-OPERATIONS § 545.91 Home office. (a) All operations of a Federal savings association (“you”) are subject to...

9 CFR 91.26 - Concrete flooring.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Concrete flooring. 91.26 Section 91.26... LIVESTOCK FOR EXPORTATION Inspection of Vessels and Accommodations § 91.26 Concrete flooring. (a) Pens aboard an ocean vessel shall have a 3 inch concrete pavement, proportioned and mixed to give 2000 psi...

49 CFR 325.91 - Exhaust systems.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Exhaust systems. 325.91 Section 325.91... EMISSION STANDARDS Exhaust Systems and Tires § 325.91 Exhaust systems. Link to an amendment published at 75 FR 57193, Sept. 20, 2010. A motor vehicle does not conform to the visual exhaust system inspection...

10 CFR 76.91 - Emergency planning.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Emergency planning. 76.91 Section 76.91 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) CERTIFICATION OF GASEOUS DIFFUSION PLANTS Safety § 76.91 Emergency planning... Emergency Planning and Community Right-to-Know Act of 1986, Title III, Public Law 99-499, or other State or...

Dicty_cDB: Contig-U12496-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available E8.r CHORI-242 Sus scrofa genomic clone C... 44 9.1 1 ( FD687842 ) CBHY1281.fwd CBHY Mycosphaerella fijiensi...s MfEST5... 44 9.1 1 ( FD687633 ) CBHY1157.rev CBHY Mycosphaerella fijiensis MfEST5... 44 9.1 1 ( FD687295 )... CBHX6118.fwd CBHX Mycosphaerella fijiensis MfEST4... 44 9.1 1 ( FD682112 ) CBHX1...985.rev CBHX Mycosphaerella fijiensis MfEST4... 44 9.1 1 ( FD677743 ) CBHW1795.rev CBHW Mycosphaerella fijie...nsis MfEST4... 44 9.1 1 ( FD666344 ) CBHT1283.rev CBHT Mycosphaerella fijiensis MfEST3... 44 9.1 1 >( AC1155

Creep and Creep Crack Growth Behaviors for SMAW Weldments of Gr. 91 Steel

International Nuclear Information System (INIS)

Kim, Woo Gon; Yin, Song Nan; Park, Ji Yeon; Hong, Sung Deok; Kim, Yong Wan; Park, Jae Young

2010-01-01

High Cr ferritic resistance steels with tempered martensite microstructures posses enhanced creep strength at the elevated temperatures. Those steels as represented by a modified 9Cr-1Mo steel (ASME Grade 91, hereafter Gr.91) are regarded as main structural materials of sodium-cooled fast reactors (SFR) and reactor pressure vessel materials of very high temperature reactors (VHTR). The SFR and VHTR systems are designed during long-term duration reaching 60 years at elevated temperatures and often subjected to non-uniform stress and temperature distribution during service. These conditions may generate localized creep damage and propagate the cracks and ultimately may cause a fracture. A significant portion of its life is spent in crack propagation. Therefore, a creep crack growth rate (CCGR) due to creep damage should be assessed for both the base metal (BM) and welded metal (WM). Enough CCGR data for them should be provided for assessing their structural integrities. However, their CCGR data for the Gr. 91 steels is still insufficient. In this study, the CCGR for the BM and the WM of the Gr. 91 steel was comparatively investigated. A series of the CCG tests were conducted under different applied loads for the BM and the WM at 600 .deg. C. The CCGR was characterized in terms of the C parameter, and their CCG behavior were compared, respectively

Effect of welding thermal cycles on the structure and properties of simulated heat-affected zone areas in X10CrMoVNb9-1 (T91) steel at a state after 100,000 h of operation

Energy Technology Data Exchange (ETDEWEB)

Łomozik, Mirosław, E-mail: miroslaw.lomozik@is.gliwice.pl [Instytut Spawalnictwa, Testing of Materials Weldability and Welded Constructions Department, 44-100 Gliwice, Bł. Czesława 16-18 (Poland); Hernas, Adam, E-mail: adam.hernas@polsl.pl [Silesian University of Technology, Faculty of Materials Engineering and Metallurgy, 40-019 Katowice, Krasińskiego 8 str. (Poland); Zeman, Marian L., E-mail: marian.zeman@is.gliwice.pl [Instytut Spawalnictwa, Testing of Materials Weldability and Welded Constructions Department, 44-100 Gliwice, Bł. Czesława 16-18 (Poland)

2015-06-18

The article presents results of structural tests (light, scanning electron and scanning transmission electron microscopy) of X10CrMoVNb9-1 (T91) creep-resisting steel after approximately 100,000 h of operation. It was ascertained that the parent metal of T91 steel is characterized by the microstructure of tempered martensite with M{sub 23}C{sub 6} carbide precipitates and few dispersive precipitates of MX-type niobium and vanadium carbonitrides. The most inconvenient change in T91 steel precipitate morphology due to long-term operation is the appearance of the Laves Fe{sub 2}Mo phase which along with M{sub 23}C{sub 6} carbide particles forms elongated blocks and conglomerates on grain boundaries. The article also presents results of tests related to the effect of simulated welding thermal cycles on selected properties of X10CrMoVNb9-1 (T91) grade steel at a state after approximately 100,000 h of operation. The tests involved the determination of the chemical composition of the steel tested as well as impact tests, hardness measurements and microscopic metallographic examination (based on light microscopy) of simulated heat-affected zone (HAZ) areas for a cooling time (t{sub 8/5}) restricted within a range between 3 s and 120 s, with and without heat treatment. The tests revealed that, among other results, hardness values of simulated HAZ areas in X10CrMoVNb9-1 (T91) steel do not guarantee cold crack safety of the steel at the state without additional heat treatment. It was also observed that simulated welding thermal cycles of cooling times t{sub 8/5}=3, 12, 60 and 120 s do not significantly affect the toughness and hardness of simulated HAZ areas of the steel tested.

Selective sweep analysis in the genomes of the 91-R and 91-C Drosophila melanogaster strains reveals few of the ‘usual suspects’ in Dichlorodiphenyltrichloroethane (DDT) resistance

Science.gov (United States)

Adaptation of insect phenotypes for survival after exposure to xenobiotics can result from selection at multiple loci with additive genetic effects. A high level dichlorodiphenyltrichloroethane (DDT) resistance phenotype in the Drosophila melanogaster strain 91-R has resulted due to continuous labo...

Formation of a dinitrosyl iron complex by NorA, a nitric oxide-binding di-iron protein from Ralstonia eutropha H16.

Science.gov (United States)

Strube, Katja; de Vries, Simon; Cramm, Rainer

2007-07-13

In Ralstonia eutropha H16, two genes, norA and norB, form a dicistronic operon that is controlled by the NO-responsive transcriptional regulator NorR. NorB has been identified as a membrane-bound NO reductase, but the physiological function of NorA is unknown. We found that, in a NorA deletion mutant, the promoter activity of the norAB operon was increased 3-fold, indicating that NorA attenuates activation of NorR. NorA shows limited sequence similarity to the oxygen carrier hemerythrin, which contains a di-iron center. Indeed, optical and EPR spectroscopy of purified NorA revealed the presence of a di-iron center, which binds oxygen in a similar way as hemerythrin. Diferrous NorA binds two molecules of NO maximally. Unexpectedly, binding of NO to the diferrous NorA required an external reductant. Two different NorA-NO species could be resolved. A minor species (up to 20%) showed an S = (1/2) EPR signal with g( perpendicular) = 2.041, and g( parallel) = 2.018, typical of a paramagnetic dinitrosyl iron complex. The major species was EPR-silent, showing characteristic signals at 420 nm and 750 nm in the optical spectrum. This species is proposed to represent a novel dinitrosyl iron complex of the form Fe(2+)-[NO](2)(2-), i.e. NO is bound as NO(-). The NO binding capacity of NorA in conjunction with its high cytoplasmic concentration (20 mum) suggests that NorA regulates transcription by lowering the free cytoplasmic concentration of NO.

Microstructure and mechanical analysis of W/P91 steel HIP-joint with Ti interlayer

Energy Technology Data Exchange (ETDEWEB)

Wang, Ji-chao [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Science Island Branch of Graduate School, University of Science & Technology of China, Hefei, 230031 (China); Wang, Wanjing, E-mail: wjwang@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Sun, Zhaoxuan; Wang, Xingli; Wei, Ran [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Science Island Branch of Graduate School, University of Science & Technology of China, Hefei, 230031 (China); Xie, Chunyi; Li, Qiang [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Luo, Guang-nan [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Science Island Branch of Graduate School, University of Science & Technology of China, Hefei, 230031 (China); Hefei Center for Physical Science and Technology, Hefei, 230022 (China); Hefei Science Center of Chinese Academy of Sciences, Hefei, 230027 (China)

2016-11-15

Highlights: • W and P91 steel can be joined successfully using the Hot Isostatic Pressing (HIP) method with Ti interlayer. • The experiment was conducted at 760 °C below the P91 steel austenitizing temperature with the pressure 150 MPa for 4 h. • The residual stress concentration is responsible for the fracture of HIP joints under low joining temperature. • Low temperature can reduce the reaction products and improve the mechanical properties of W/Ti/P91 steel joints. - Abstract: W and P91 steel were joined by using the Hot Isostatic Pressing method with Ti interlayer, and the experiments were conducted at 760 °C. The mechanical property, bonding quality and interface microstructure were tested by the Torsion test, Non-Destructive Test, Scanning Electron Microscope and Nano-indentation test. The minimum shear strength of joints was 225 MPa and the failure occurred at the W/Ti interfaces. Metallographic analysis revealed good bonding quality across bonding lines. Almost no reaction products were found in the diffusion region and the Nano-indentation test demonstrated that the solid solution strengthening was caused by inter-diffusion in the diffusion zone. The effect of low joining temperature on reducing reaction products and improving mechanical properties of W/Ti/Steel diffusion bonding were investigated in this paper.

Microstructure and mechanical analysis of W/P91 steel HIP-joint with Ti interlayer

International Nuclear Information System (INIS)

Wang, Ji-chao; Wang, Wanjing; Sun, Zhaoxuan; Wang, Xingli; Wei, Ran; Xie, Chunyi; Li, Qiang; Luo, Guang-nan

2016-01-01

Highlights: • W and P91 steel can be joined successfully using the Hot Isostatic Pressing (HIP) method with Ti interlayer. • The experiment was conducted at 760 °C below the P91 steel austenitizing temperature with the pressure 150 MPa for 4 h. • The residual stress concentration is responsible for the fracture of HIP joints under low joining temperature. • Low temperature can reduce the reaction products and improve the mechanical properties of W/Ti/P91 steel joints. - Abstract: W and P91 steel were joined by using the Hot Isostatic Pressing method with Ti interlayer, and the experiments were conducted at 760 °C. The mechanical property, bonding quality and interface microstructure were tested by the Torsion test, Non-Destructive Test, Scanning Electron Microscope and Nano-indentation test. The minimum shear strength of joints was 225 MPa and the failure occurred at the W/Ti interfaces. Metallographic analysis revealed good bonding quality across bonding lines. Almost no reaction products were found in the diffusion region and the Nano-indentation test demonstrated that the solid solution strengthening was caused by inter-diffusion in the diffusion zone. The effect of low joining temperature on reducing reaction products and improving mechanical properties of W/Ti/Steel diffusion bonding were investigated in this paper.

31 CFR 91.6 - Nuisances.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Nuisances. 91.6 Section 91.6 Money and Finance: Treasury Regulations Relating to Money and Finance REGULATIONS GOVERNING CONDUCT IN OR ON... language, unwarranted loitering, unauthorized assembly, the creation of any hazard to persons or things...

21 CFR 1316.91 - Definitions.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Definitions. 1316.91 Section 1316.91 Food and Drugs DRUG ENFORCEMENT ADMINISTRATION, DEPARTMENT OF JUSTICE ADMINISTRATIVE FUNCTIONS, PRACTICES, AND..., isomers, or salts of its isomers. (3) The possession of a narcotic, a depressant, a stimulant, a...

9 CFR 91.9 - Swine.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Swine. 91.9 Section 91.9 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS INSPECTION AND HANDLING OF LIVESTOCK FOR...

9 CFR 91.8 - Sheep.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Sheep. 91.8 Section 91.8 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS INSPECTION AND HANDLING OF LIVESTOCK FOR...

7 CFR 1000.91-1000.92 - [Reserved

Science.gov (United States)

2010-01-01

... 7 Agriculture 9 2010-01-01 2009-01-01 true [Reserved] 1000.91-1000.92 Section 1000.91-1000.92 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Miscellaneous Provisions §§ 1000.91-1000.92 [Reserved] ...

Treatment of arsenic contaminated water in a batch reactor by using Ralstonia eutropha MTCC 2487 and granular activated carbon

International Nuclear Information System (INIS)

Mondal, P.; Majumder, C.B.; Mohanty, B.

2008-01-01

This paper presents the observations on the bio-removal of arsenic from contaminated water by using Ralstonia eutropha MTCC 2487 and activated carbon in a batch reactor. The effects of agitation time, pH, type of granular activated carbon (GAC) and initial arsenic concentration (As o ) on the % removal of arsenic have been discussed. Under the experimental conditions, optimum removal was obtained at the pH of 6-7 with agitation time of 100 h. The % removal of As(T) increased initially with the increase in As o and after attaining the maximum removal (∼86%) at the As o value of around 15 ppm, it started to decrease. Simultaneous adsorption bioaccumulation (SABA) was observed, when fresh GAC was used as supporting media for bacterial immobilization. In case of SABA, the % removal of As(III) was almost similar (only ∼1% more) to the additive values of individual removal of As(III) obtained by only adsorption and only bio-adsorption. However, for As(V) the % removal was less (∼8%) than the additive value of the individual % removals obtained by only adsorption and bio-adsorption. Percentage removal of Fe, Mn, Cu and Zn were 65.17%, 72.76%, 98.6% and 99.31%, respectively. Maximum regeneration (∼99.4%) of the used bio-adsorbent was achieved by the treatment with 5NH 2 SO 4 followed by 1N NaOH and 30% H 2 O 2 in HNO 3 . The fitness of the isotherms to predict the specific uptake for bio-adsorption/accumulation process has been found to decrease in the following order: Temkin isotherm > Langmuir isotherm > Freundlich isotherm. For the adsorption process with fresh GAC the corresponding order is Freundlich isotherm > Langmuir isotherm > Temkin isotherm for As(V) and As(T). However, for As(III) it was Langmuir > Temkin > Freundlich

24 CFR 91.5 - Definitions.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Definitions. 91.5 Section 91.5 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development... disability at the time of his or her death. Poverty level family. Family with an income below the poverty...

49 CFR 229.91 - Motors and generators.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Motors and generators. 229.91 Section 229.91 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION....91 Motors and generators. A motor or a generator may not have any of the following conditions: (a) Be...

7 CFR 301.91-2 - Regulated articles.

Science.gov (United States)

2010-01-01

... 7 Agriculture 5 2010-01-01 2010-01-01 false Regulated articles. 301.91-2 Section 301.91-2... Regulations § 301.91-2 Regulated articles. The following are regulated articles: (a) Logs, pulpwood, branches...) Any other product, article, or means of conveyance, of any character whatsoever, not covered by...

46 CFR 91.25-25 - Hull equipment.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Hull equipment. 91.25-25 Section 91.25-25 Shipping COAST... CERTIFICATION Inspection for Certification § 91.25-25 Hull equipment. (a) At each inspection for certification and periodic inspection, the inspectors shall conduct the following tests and inspections of hull...

25 CFR 91.9 - Inheritance of improvements.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Inheritance of improvements. 91.9 Section 91.9 Indians..., OSAGE RESERVATION, OKLAHOMA § 91.9 Inheritance of improvements. (a) Upon the death of the owner of... of the county courts, State of Oklahoma, and shall be subject to inheritance or bequest in accordance...

46 CFR 91.25-38 - Pollution prevention.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Pollution prevention. 91.25-38 Section 91.25-38 Shipping... CERTIFICATION Inspection for Certification § 91.25-38 Pollution prevention. At each inspection for certification... design and equipment requirements for pollution prevention in 33 CFR part 155, subpart B. [CGD 71-161R...

Weldability investigation steel P 91 by weld thermal cycle simulation

Directory of Open Access Journals (Sweden)

M. Dunđer

2015-07-01

Full Text Available This paper elaborates results of hardness and impact energy of thermal cycle simulated specimens of high-alloy steel P 91 and their dependence on cooling time from 800 to 500 °C. Results were obtained by measuring hardness HV 1 and by experimental testing of Charpy notched specimens. Metallographic analysis of samples was performed on scanning electronic microscope.

14 CFR 91.17 - Alcohol or drugs.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Alcohol or drugs. 91.17 Section 91.17... AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES General § 91.17 Alcohol or drugs. (a... consumption of any alcoholic beverage; (2) While under the influence of alcohol; (3) While using any drug that...

40 CFR 91.410 - Engine test cycle.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine test cycle. 91.410 Section 91...) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test Procedures § 91.410 Engine test cycle. (a) The 5-mode cycle specified in Table 2 in appendix A to this subpart shall be followed...

31 CFR 91.4 - Preservation of property.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Preservation of property. 91.4 Section 91.4 Money and Finance: Treasury Regulations Relating to Money and Finance REGULATIONS GOVERNING CONDUCT IN OR ON THE BUREAU OF THE MINT BUILDINGS AND GROUNDS § 91.4 Preservation of property. It shall be...

14 CFR 91.709 - Operations to Cuba.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Operations to Cuba. 91.709 Section 91.709... Board Such Aircraft § 91.709 Operations to Cuba. No person may operate a civil aircraft from the United States to Cuba unless— (a) Departure is from an international airport of entry designated in § 6.13 of...

PRODUCCIÓN DE POLIHIDROXIALCANOATOS (PHAs A PARTIR DE Ralstonia eutropha EN UN MEDIO CON HARINA DE YUCA COMO FUENTE DE CARBONO

Directory of Open Access Journals (Sweden)

ELIZABETH ROJAS FERNÁNDEZ

Full Text Available Los polihidroxialcanoatos (PHAs son poliésteres intracelulares sintetizados por diferentes especies bacterianas, las cuales los acumulan como gránulos cuando se encuentran en condiciones limitantes de nutrientes esenciales para su crecimiento como el oxígeno, nitrógeno y carbono, son biodegradables y, dependiendo de su composición química y estructural, pueden ser empleados en aplicaciones semejantes a los polímeros [1].En la actualidad, este tipo de biopolímeros presentan un mayor costo comparado con los derivados del petróleo, pero el uso de fuentes renovables y el aprovechamiento de subproductos agroindustriales para la generación de nuevos productos es una alternativa ecológica de importancia mundial. En la presente investigación se estudió la producción de polihidroxialcanoatos (PHA mediante fermentación bacteriana de glucosa, obtenida a partir de harina de yuca HMC1 empleando Ralstonia eutropha en un medio con cinco relaciones carbono/nitrógeno(12:1, 16:1, 20:1, 24:1, 28:1. Se obtuvo como resultado, que la relación carbono/nitrógeno de 20 es la que más favorece la acumulación intracelular de biopolímero, con la cual se alcanza una producción de 0,62 g/L de PHA. El PHA sintetizado se caracterizó por medio de calorimetría diferencial de barrido (DSC, Análisis Termogravimetrico (TGA, Espectroscopía de Infrarrojo con Transformada de Fourier (IR-FT y Microscopía electrónica de Barrido (SEM, concluyendo que el biopolímero obtenido fue polihidroxibutirato (PHB.

Diffusion Bonding and Post-Weld Heat Treatment of Extruded AZ91 Magnesium Alloys

Directory of Open Access Journals (Sweden)

Fei LIN

2015-11-01

Full Text Available The grain size of as-extruded AZ91 magnesium alloys was refined to 12.31 μm from 21.41 μm by recrystallization annealing. The vacuum diffusion welding of as-annealed AZ91 magnesium alloys was researched. The results showed that the maximum shear strength of joints reached 64.70 MPa in the situation of 10 MPa bonding pressure, 18 Pa vacuum degree, 470 °C bonding temperature and 90 min bonding time; both bonding temperature and time are the main influence factors on as-extruded AZ91 magnesium alloys diffusion welding. Then the diffusion welded specimens were annealed, and the shear strength of joints was further improved to 76.93 MPa.DOI: http://dx.doi.org/10.5755/j01.ms.21.4.9699

28 CFR 91.53 - Other guidance.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Other guidance. 91.53 Section 91.53 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) GRANTS FOR CORRECTIONAL FACILITIES Environmental... Justice has also published NEPA procedures that incorporate the CEQ regulations at 28 CFR part 61...

28 CFR 91.60 - Grantee's responsibilities.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Grantee's responsibilities. 91.60 Section 91.60 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) GRANTS FOR CORRECTIONAL FACILITIES...'s responsibilities. Specific duties. As part of its role in the NEPA process, the grantee agency...

Investigation of steam oxidation behaviour of TP347H FG Part 2: Exposure at 91 bar

DEFF Research Database (Denmark)

Jianmin, J; Montgomery, Melanie; Larsen, OH

2005-01-01

Tube specimens of TP347FG were exposed in a test superheater loop in a biomass plant in Denmark. The specimens were exposed to surface metal temperatures in the range of 455-568C, steam pressure of 91 bar and exposure duration of 3500 and 8700 hours. The oxide thickness and morphology was investi......Tube specimens of TP347FG were exposed in a test superheater loop in a biomass plant in Denmark. The specimens were exposed to surface metal temperatures in the range of 455-568C, steam pressure of 91 bar and exposure duration of 3500 and 8700 hours. The oxide thickness and morphology...

Fatigue Resistance of GX12CrMoVNbN9-1 Cast Steel after Ageing Process

Directory of Open Access Journals (Sweden)

Stanisław MROZIŃSKI

2014-12-01

Full Text Available In the present paper, low cycle fatigue behaviour of GX12CrMoVNbN9-1 (GP91 cast steel is presented. Fatigue tests were performed under isothermal conditions at room temperature and at 550 and 600oC, on five levels of total strain amplitude value ɛac = 0.25÷0.60%. The cast steel subject to investigation was in the as-received condition (after heat treatment and after 8000 hours of ageing at the temperature of 600oC. Performed research has shown an insignificant influence of the ageing process on mechanical properties of GP91 cast steel, determined with the static test of tension. Analysis of the performed tests has proved that GP91 cast steel in the as-received condition and after ageing process was characterized by strong cyclic softening without a clear period of stabilization of the hysteresis loop parameters. The fatigue lifetime curves at each temperature were obtained based on Basquin and Coffin – Manson equations. The process of ageing of GP91 cast steel contributed to a decrease in its fatigue life Nf from a few to a few dozen percent, and the level of fatigue life was dependent on the value of strain amplitude ɛac. It has also been stated that the fatigue life Nf of GP91 cast steel is determined by its plastic properties, and the degree of changes in fatigue life Nf was dependent not only on the temperature of testing, but also on the value of strain amplitude ɛac. DOI: http://dx.doi.org/10.5755/j01.ms.20.4.6077

28 CFR 91.59 - OJP's responsibilities.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false OJP's responsibilities. 91.59 Section 91.59 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) GRANTS FOR CORRECTIONAL FACILITIES... be required. (b) Specific duties. As part of its role in the NEPA process, OJP shall: (1) Issue...

14 CFR 91.1015 - Management specifications.

Science.gov (United States)

2010-01-01

... complete and separate set of its management specifications at its principal base of operations, or at a... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Management specifications. 91.1015 Section... Operations Program Management § 91.1015 Management specifications. (a) Each person conducting operations...

9 CFR 91.7 - Captive cervids.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Captive cervids. 91.7 Section 91.7 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS INSPECTION AND HANDLING OF...

50 CFR 18.91 - Director's decision.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Director's decision. 18.91 Section 18.91...) TAKING, POSSESSION, TRANSPORTATION, SALE, PURCHASE, BARTER, EXPORTATION, AND IMPORTATION OF WILDLIFE AND... decision. (a) Upon receipt of the recommended decision and transcript and after the thirty-day period for...

24 CFR 91.220 - Action plan.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Action plan. 91.220 Section 91.220 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development..., evaluate and reduce lead-based paint hazards, reduce the number of poverty-level families, develop...

24 CFR 91.320 - Action plan.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Action plan. 91.320 Section 91.320 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development...), evaluate and reduce lead-based paint hazards, reduce the number of poverty level families, develop...

31 CFR 91.3 - Recording presence.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Recording presence. 91.3 Section 91.3 Money and Finance: Treasury Regulations Relating to Money and Finance REGULATIONS GOVERNING CONDUCT IN... exists, and at such other times as may be necessary for the orderly conduct of the Government's business...

9 CFR 91.20 - General construction.

Science.gov (United States)

2010-01-01

... of construction materials such as wood, metal plate, or pipe may be used for stalls, crates, or pens... accessible to animals. A combination of wood and steel pipe or other steel profile construction may be... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false General construction. 91.20 Section 91...

Characterization of films formed by the aluminizing of T91 steel

Science.gov (United States)

Sanabria Cala, J. A.; Conde Rodríguez, G. R.; Y Peña Ballesteros, D.; Laverde Cataño, D.; Quintero Rangel, L. S.

2017-12-01

The aluminizing of a T91 martensitic ferritic steel was carried out by a novel modification to the traditional technique of packed cementation, with the objective of producing a diffusion coating of aluminum in a shorter time and operating cost, from a technique that allows the reuse of powder packaging and which the coating of metal parts with complex shapes can be secured. As an aluminum source, commercial foil is used to wrap the piece to be coated, while the powder packaging contains aluminum oxide Al2O3 and an activating salt, ammonium chloride NH4Cl. During the deposition process of the coating, the NH4Cl is decomposed by reacting with foil, and thus, aluminum halides can be transferred to the metallic substrate, which deposit aluminum on the T91 steel surface while Al2O3 can be recycled for subsequent processes. The results of the diffractograms and micrographs indicated the strong influence of temperature, exposure time and ammonium chloride concentration in the formation and growth evolution of a stable coating of iron-aluminum and iron-aluminum-nickel on the T91 steel surface, which was effectively deposited at a temperature of 700°C and an exposure period of 9 hours. The coating formed on the T91 steel surface could play a protective role towards the material by acting as a physical barrier between the alloy and other corrosive species in high temperature operated systems.

Lack of Association between Hepatitis C Virus core Gene Variation 70/91aa and Insulin Resistance.

Science.gov (United States)

Scalioni, Letícia de Paula; da Silva, Allan Peres; Miguel, Juliana Custódio; Espírito Santo, Márcia Paschoal do; Marques, Vanessa Alves; Brandão-Mello, Carlos Eduardo; Villela-Nogueira, Cristiane Alves; Lewis-Ximenez, Lia Laura; Lampe, Elisabeth; Villar, Livia Melo

2017-07-21

The role of hepatitis C virus (HCV) in insulin resistance (IR) is not fully understood. The aim of this study was to determine the impact of amino acid (aa) substitutions in the core region of HCV according to IR and to identify clinical and laboratory associations. Ninety-two treatment-naive HCV patients were recruited to determine laboratory data and blood cell count. IR was determined using Homeostasis Model Assessment (HOMA) index where IR was defined as HOMA ≥2. HCV RNA load and genotype were determined by Abbott Real time HCV. HCV core region was determined by direct nucleotide sequencing. Bivariate analysis was conducted using HOMA IR ≥2 as a dependent factor. IR prevalence was 43.5% ( n = 40), vitamin D sufficiency was found in 76.1% ( n = 70) and 72.8% ( n = 67) had advanced liver fibrosis. In the bivariate analyses, elevated values of γGT ( p = 0.024) and fibrosis staging ( p = 0.004) were associated with IR, but IR was not related to core mutations. The presence of glutamine in position 70 was associated with low vitamin D concentration ( p = 0.005). In the multivariate analysis, no variable was independently associated with HOMA-IR. In conclusion, lack of association between IR and HCV core mutations in positions 70 and 91 suggests that genetic variability of this region has little impact on IR.

14 CFR 91.139 - Emergency air traffic rules.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Emergency air traffic rules. 91.139 Section 91.139 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Flight Rules General § 91.139 Emergency air traffic rules. (a) This...

Creep rupture behavior of welded Grade 91 steel

Energy Technology Data Exchange (ETDEWEB)

Shrestha, Triratna [Department of Chemical and Materials Engineering, University of Idaho, Moscow, ID 83844 (United States); Basirat, Mehdi [Department of Mechanical Engineering, University of Idaho, Moscow, ID 83844 (United States); Alsagabi, Sultan; Sittiho, Anumat [Department of Chemical and Materials Engineering, University of Idaho, Moscow, ID 83844 (United States); Charit, Indrajit, E-mail: icharit@uidaho.edu [Department of Chemical and Materials Engineering, University of Idaho, Moscow, ID 83844 (United States); Potirniche, Gabriel P. [Department of Mechanical Engineering, University of Idaho, Moscow, ID 83844 (United States)

2016-07-04

Creep rupture behavior of fusion welded Grade 91 steel was studied in the temperature range of 600 – 700 °C and at stresses of 50–200 MPa. The creep data were analyzed in terms of the Monkman-Grant relation and Larson-Miller parameter. The creep damage tolerance factor was used to identify the origin of creep damage. The creep damage was identified as the void growth in combination with microstructural degradation. The fracture surface morphology of the ruptured specimens was studied by scanning electron microscopy and deformed microstructure examined by transmission electron microscopy, to further elucidate the rupture mechanisms.

AUMENTO EN LA RESISTENCIA A LA CORROSIÓN DE UN ACERO T91 ALUMINIZADO

Directory of Open Access Journals (Sweden)

LUZ S. QUINTERO

2011-01-01

Full Text Available El acero ferrítico T91 ha sido ampliamente utilizado en plantas de generación de energía eléctrica, calderas y plantas nucleares. Sin embargo, su resistencia a la oxidación se ve gravemente afectada a temperaturas superiores a los 600ºC. En esta investigación se empleó la técnica de cementación empacada para aluminizar un acero T91 y se encontraron las condiciones óptimas para la formación de un recubrimiento libre de porosidad y con espesor uniforme (300 micras. Se evaluó la capa de óxido formada luego de una exposición a 800ºC en atmósfera de aire. La caracterización del recubrimiento y de la capa de óxido (Al2O3 se llevó a cabo empleando un microscopio electrónico de barrido (SEM, Espectroscopia de Rayos X (EDX y mapping. Se comprobó una buena resistencia a la oxidación del acero T91 aluminizado, debido a la formación de una fina capa continua de óxido de aluminio de aproximadamente 6 micras de espesor luego de una exposición de 7 días.

14 CFR 91.861 - Base level.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Base level. 91.861 Section 91.861... level. (a) U.S. Operators. The base level of a U.S. operator is equal to the number of owned or leased... to paragraphs (a) (1) and (2). (1) The base level of a U.S. operator shall be increased by a number...

Splice form variant and amino acid changes in MDR49 confers DDT resistance in transgenic Drosophila.

Science.gov (United States)

Seong, Keon Mook; Sun, Weilin; Clark, John M; Pittendrigh, Barry R

2016-03-22

The ATP-binding cassette (ABC) transporters represent a superfamily of proteins that have important physiological roles in both prokaryotes and eukaryotes. In insects, ABC transporters have previously been implicated in insecticide resistance. The 91-R strain of Drosophila melanogaster has been intensely selected with DDT over six decades. A recent selective sweeps analysis of 91-R implicated the potential role of MDR49, an ABC transporter, in DDT resistance, however, to date the details of how MDR49 may play a role in resistance have not been elucidated. In this study, we investigated the impact of structural changes and an alternative splicing event in MDR49 on DDT-resistance in 91-R, as compared to the DDT susceptible strain 91-C. We observed three amino acid differences in MDR49 when 91-R was compared with 91-C, and only one isoform (MDR49B) was implicated in DDT resistance. A transgenic Drosophila strain containing the 91-R-MDR49B isoform had a significantly higher LD50 value as compared to the 91-C-MDR49B isoform at the early time points (6 h to 12 h) during DDT exposure. Our data support the hypothesis that the MDR49B isoform, with three amino acid mutations, plays a role in the early aspects of DDT resistance in 91-R.

Effect of Heat Treatment on Microstructure and Hardness of Grade 91 Steel

Directory of Open Access Journals (Sweden)

Triratna Shrestha

2015-01-01

Full Text Available Grade 91 steel (modified 9Cr-1Mo steel is considered a prospective material for the Next Generation Nuclear Power Plant for application in reactor pressure vessels at temperatures of up to 650 °C. In this study, heat treatment of Grade 91 steel was performed by normalizing and tempering the steel at various temperatures for different periods of time. Optical microscopy, scanning and transmission electron microscopy in conjunction with microhardness profiles and calorimetric plots were used to understand the microstructural evolution including precipitate structures and were correlated with mechanical behavior of the steel. Thermo-Calc™ calculations were used to support the experimental work. Furthermore, carbon isopleth and temperature dependencies of the volume fraction of different precipitates were constructed.

14 CFR 91.1081 - Crewmember training requirements.

Science.gov (United States)

2010-01-01

... particular assignment of the crewmember: (1) Basic indoctrination ground training for newly hired crewmembers... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Crewmember training requirements. 91.1081... Operations Program Management § 91.1081 Crewmember training requirements. (a) Each program manager must...

FUNCTIONAL IMPLICATIONS OF THE CLOCK 3111T/C SINGLE-NUCLEOTIDE POLYMORPHISM

Directory of Open Access Journals (Sweden)

Angela Renee Ozburn

2016-04-01

Full Text Available Circadian rhythm disruptions are prominently associated with Bipolar Disorder (BD. Circadian rhythms are regulated by the molecular clock, a family of proteins that function together in a transcriptional-translational feedback loop. The CLOCK protein is a key transcription factor of this feedback loop, and previous studies have found that manipulations of the Clock gene are sufficient to produce manic-like behavior in mice (Roybal et al., 2007. The Clock 3111T/C single-nucleotide polymorphism (SNP; rs1801260 is a genetic variation of the human Clock gene that is significantly associated with increased frequency of manic episodes in BD patients (Benedetti et al., 2003. The 3111T/C SNP is located in the 3’ untranslated region of the Clock gene. In this study, we sought to examine the functional implications of the human Clock 3111T/C SNP by transfecting a mammalian cell line (mouse embryonic fibroblasts isolated from Clock -/- knockout mice with pcDNA plasmids containing the human Clock gene with either the T or C SNP at position 3111. We then measured circadian gene expression over a 24 hour time period. We found that the Clock3111C SNP resulted in higher mRNA levels than the Clock 3111T SNP. Further, we found that Per2, a transcriptional target of CLOCK, was also more highly expressed with Clock 3111C expression, indicating the 3’UTR SNP affects the expression, function and stability of Clock mRNA.

14 CFR 91.529 - Flight engineer requirements.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Flight engineer requirements. 91.529...-Powered Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.529 Flight engineer... flight engineer certificate: (1) An airplane for which a type certificate was issued before January 2...

40 CFR 91.316 - Hydrocarbon analyzer calibration.

Science.gov (United States)

2010-07-01

....316 Section 91.316 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS... operating adjustment using the appropriate fuel (see § 91.312) and purified synthetic air or zero-grade... problem. (4) Introduce the 5 percent and 10 percent oxygen interference check gases. (5) Recheck the zero...

15 CFR 700.91 - Records and reports.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Records and reports. 700.91 Section 700.91 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS...

40 CFR 91.318 - Oxides of nitrogen analyzer calibration.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Oxides of nitrogen analyzer calibration. 91.318 Section 91.318 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Provisions § 91.318 Oxides of nitrogen analyzer calibration. (a) Calibrate the chemiluminescent oxides of...

40 CFR 91.1008 - National security exemption.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false National security exemption. 91.1008... Engines § 91.1008 National security exemption. (a)(1) Any marine SI engine, otherwise subject to this part... for purposes of national security. No request for exemption is necessary. (2) Manufacturers may...

40 CFR 91.106 - Certificate of conformity.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Certificate of conformity. 91.106... Provisions § 91.106 Certificate of conformity. (a) Every manufacturer of a new marine SI engine produced... obtain a certificate of conformity covering each engine family. The certificate of conformity must be...

The preparation and biological characterization of a new HL91-derivative for hypoxic imaging on stroke mice

Energy Technology Data Exchange (ETDEWEB)

Hsia, C.-C. [Department of Biomedical Imaging and Radiological Sciences, National Yang-Ming University, Taiwan (China); Institute of Nuclear Energy Research, Taiwan (China); Huang, F.-L.; Lin, C.-H.; Shen, L.-H. [Institute of Nuclear Energy Research, Taiwan (China); Wang, H.-E., E-mail: hewang@ym.edu.t [Department of Biomedical Imaging and Radiological Sciences, National Yang-Ming University, Taiwan (China)

2010-09-15

Aim: {sup 99m}Tc-HL91 (Prognox, GE-Healthcare) was the first nonnitro-aryl-based radiotracer for evaluating hypoxic fraction in neoplasm, stroke and myocardium infarction regions. However, the high hydrophilicity of {sup 99m}Tc-HL91 might hamper its penetration into cells. In this study, we prepared a new ligand 4,4,11,11-tetramethyl- 5,10-diazatetradecane- 3,12-dionedioxime (HL91-ET) with higher lipophilicity but structurally similar compared with that of HL91. The chemical and biological characterizations of {sup 99m}Tc-HL91-ET as a scintigraphic probe for hypoxia were performed with a stroke-bearing mouse model. Materials and Methods: HL91-ET was synthesized and formulated with stannous chloride and buffer to afford kits. After mixing with {sup 99m}Tc-pertechnetate, {sup 99m}Tc-HL91-ET can be prepared in high yield and high radiochemical purity (both >96%). The partition coefficient of {sup 99m}Tc-HL91-ET was determined in n-octanol/PBS system. Cellular uptake assays under normoxic and hypoxic conditions were performed in an oxygen-controlled CO{sub 2} incubator. Brain stroke in the mouse model was induced by the electrocautery of the middle cerebral artery. After intravenous injection of {sup 99m}Tc-HL91-ET into the Balb/c mouse suffering brain stroke, small-animal SPECT images were acquired at designated time points and autoradiography of the brain slides was conducted. Parallel studies of {sup 99m}Tc-HL91 were also conducted at the same conditions for comparison. Results: The higher partition coefficient of {sup 99m}Tc-HL91-ET (0.294{+-}0.007) indicated higher lipophlicity compared with that of {sup 99m}Tc-HL91 (0.089{+-}0.005). The {sup 99m}Tc-HL91-ET preparation was stable at ambient temperature for 24 h. Cellular uptake assay showed that {sup 99m}Tc-HL91-ET was less selectively retained in hypoxic cells than {sup 99m}Tc-HL91. The target-to-normal brain ratios derived from the autoradiograms of the brains of stroke mice were 1.31{+-}0.02 and 17

The preparation and biological characterization of a new HL91-derivative for hypoxic imaging on stroke mice

International Nuclear Information System (INIS)

Hsia, C.-C.; Huang, F.-L.; Lin, C.-H.; Shen, L.-H.; Wang, H.-E.

2010-01-01

Aim: 99m Tc-HL91 (Prognox, GE-Healthcare) was the first nonnitro-aryl-based radiotracer for evaluating hypoxic fraction in neoplasm, stroke and myocardium infarction regions. However, the high hydrophilicity of 99m Tc-HL91 might hamper its penetration into cells. In this study, we prepared a new ligand 4,4,11,11-tetramethyl- 5,10-diazatetradecane- 3,12-dionedioxime (HL91-ET) with higher lipophilicity but structurally similar compared with that of HL91. The chemical and biological characterizations of 99m Tc-HL91-ET as a scintigraphic probe for hypoxia were performed with a stroke-bearing mouse model. Materials and Methods: HL91-ET was synthesized and formulated with stannous chloride and buffer to afford kits. After mixing with 99m Tc-pertechnetate, 99m Tc-HL91-ET can be prepared in high yield and high radiochemical purity (both >96%). The partition coefficient of 99m Tc-HL91-ET was determined in n-octanol/PBS system. Cellular uptake assays under normoxic and hypoxic conditions were performed in an oxygen-controlled CO 2 incubator. Brain stroke in the mouse model was induced by the electrocautery of the middle cerebral artery. After intravenous injection of 99m Tc-HL91-ET into the Balb/c mouse suffering brain stroke, small-animal SPECT images were acquired at designated time points and autoradiography of the brain slides was conducted. Parallel studies of 99m Tc-HL91 were also conducted at the same conditions for comparison. Results: The higher partition coefficient of 99m Tc-HL91-ET (0.294±0.007) indicated higher lipophlicity compared with that of 99m Tc-HL91 (0.089±0.005). The 99m Tc-HL91-ET preparation was stable at ambient temperature for 24 h. Cellular uptake assay showed that 99m Tc-HL91-ET was less selectively retained in hypoxic cells than 99m Tc-HL91. The target-to-normal brain ratios derived from the autoradiograms of the brains of stroke mice were 1.31±0.02 and 17.47±0.10 (n=3), respectively, at 2 h post injection of 99m Tc-HL91-ET and 99m Tc-HL91

Proceedings of oceans '91

International Nuclear Information System (INIS)

Anon.

1991-01-01

This volume contains the proceedings of the Oceans '91 Conference. Topics addressed include: ocean energy conversion, marine communications and navigation, ocean wave energy conversion, environmental modeling, global climate change, ocean minerals technology, oil spill technology, and submersible vehicles

7 CFR 91.18 - Financial interest of a scientist.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Financial interest of a scientist. 91.18 Section 91.18 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards... SERVICES AND GENERAL INFORMATION Laboratory Service § 91.18 Financial interest of a scientist. No scientist...

40 CFR 91.309 - Engine intake air temperature measurement.

Science.gov (United States)

2010-07-01

... measurement. 91.309 Section 91.309 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Provisions § 91.309 Engine intake air temperature measurement. (a) Engine intake air temperature measurement must be made within 100 cm of the air-intake of the engine. The measurement location must be either in...

Experimental study of hypoxia-imaging agent 99mTc-HL91 in mice bearing glioblastoma G422

International Nuclear Information System (INIS)

Zhou Ying; Qu Wanying; Yao Zhiming; Chen Fang; Zhu Ming; Zhu Lin

1999-01-01

Objective: To evaluate the ability of detecting cerebral tumor by 99m Tc-HL91 in mice bearing glioblastoma G422. Methods: Six model mice underwent static whole body planar imagings at once and at 1,2,3,4,6,7,8 h postinjection of 99m Tc-HL91. Three mice each were killed at 4 h and 8 h, respectively. the tumor, blood and organs were removed, weighted and the radioactivity was measured. ROIs were drawn around tumor, head, contralateral axilla and chest in whole body planar images, and the radioactivity ratios of tumor to head (T/H), contralateral axilla (T/A) and chest (T/C) were calculated. Results: Increased tumor activity was identified in static whole body planar images since 1 h postinjection. At 2h postinjection, T/H, T/A and T/C were 2.93 +- 0.51, 4.86 +- 0.79 and 2.00 +- 0.35 respectively, which were significantly higher than those at once and at 1h postinjection (P 99m Tc-HL91 in tumor tissue of mice bearing glioblastoma G422 is increased and clearance rate is decreased. 99m Tc-HL91 imaging is suitable for glioblastoma at 2 h postinjection. It is appropriate to image tumors in head, neck, thorax, bone and soft tissues, but not in abdominal area

Dicty_cDB: Contig-U06875-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available . 44 3.6 1 ( DW405755 ) EST000176 Trichophyton rubrum cDNA library Tricho... 44 3.6 1 ( AU269367 ) Dictyostelium discoideum vegetati...5aa06.g2 hhd Oryza coarctata genomic clone ... 46 0.91 1 ( EV115075 ) 0120387 Brassica napus Root library Brassic...ES Homo sapiens cDNA 5', mRNA ... 46 0.91 1 ( CF872366 ) tric002xo14.b11 T.reesei mycelial culture...4 3.6 1 ( ES282448 ) PQ037G01.XT7 non-sporulating culture of P. brassi... 44 3.6 1 ( EL772758 ) Plate_11b_G10 Hibernati...ng 13-lined squirrel brain... 44 3.6 1 ( EC618786 ) S_F11_a1_093.ab1 Rabbit heart cDNA library Or

Effects of filter materials on microstructure and mechanical properties of AZ91

Directory of Open Access Journals (Sweden)

Wu Guohua

2010-11-01

Full Text Available The present investigation studied the effects of different kinds of ceramic foam filters (CFF incorporating gas bubbling on the microstructure and mechanical properties of virgin AZ91 alloys, and the reactions between filters and Mg melt during filtration. The results show that the purification process of CFF incorporating gas bubbling process can obviously improve the Rm and A of AZ91 alloy, especially the A. Amongst the selected four kinds of CFF, the MgO filter is the most suitable for filtrating Mg melt, and the filtration effective sequence of four kinds of filtrating materials is as follows: MgO>Al2O3>ZrO2>SiC. With MgO filter incorporating gas bubbling treatment under Ar flow rate of 2 L/min and temperature of 730 °C, the ultimate tensile strength Rm and elongation A can be improved greatly from 175.3 MPa and 2.74% to 195.4 MPa and 4.54%, respectively. No inclusions are found on the fracture surface of the sample filtrated by MgO ceramic foam filter, and the fracture mode is quasi-cleavage crack.

The effect of Ca and RE elements on the precipitation kinetics of Mg17Al12 phase during artificial aging of magnesium alloy AZ91

International Nuclear Information System (INIS)

Amir Esgandari, B.; Mehrjoo, H.; Nami, B.; Miresmaeili, S.M.

2011-01-01

Highlights: → Ca and RE elements decrease the precipitation rate during aging of AZ91 alloy. → Precipitation kinetics and mechanism during aging of the alloys were studied. → Effect of Ca and RE on creep properties of age hardened AZ91 alloy was studied. - Abstract: The effect of simultaneous alloying with Ca and rare earth (RE) elements on the age hardening kinetics of AZ91 was studied through the fitting of the Johnson-Mehl-Avrami (JMA) equation. The results showed that the addition of both Ca and RE elements not only suppress discontinuous precipitation of the Mg 17 Al 12 phase during the age hardening process, but also decrease the alloy hardness. Fitting the JMA equation to the experimental data indicated that the phase transformation during age hardening of an alloy variant containing both Ca and RE (at 170 deg. C and 190 deg. C) and standard AZ91 (at 170 deg. C) takes place by the nucleation of precipitates on dislocations. In contrast, the precipitation during age hardening of AZ91 at 190 deg. C occurs via nucleation at grain boundaries. Although it was observed that the creep strength of age hardened specimens are lower than that of the as cast specimens, but age hardening treatment has lower deleterious influence on the creep resistance of the alloy containing Ca and RE in comparison with conventional AZ91. This may be ascribed to the decreased precipitation rate resulting from the addition of both Ca and RE elements.

Genetic recombination of the hepatitis C virus: clinical implications.

Science.gov (United States)

Morel, V; Fournier, C; François, C; Brochot, E; Helle, F; Duverlie, G; Castelain, S

2011-02-01

Genetic recombination is a well-known feature of RNA viruses that plays a significant role in their evolution. Although recombination is well documented for Flaviviridae family viruses, the first natural recombinant strain of hepatitis C virus (HCV) was identified as recently as 2002. Since then, a few other natural inter-genotypic, intra-genotypic and intra-subtype recombinant HCV strains have been described. However, the frequency of recombination may have been underestimated because not all known HCV recombinants are screened for in routine practice. Furthermore, the choice of treatment regimen and its predictive outcome remain problematic as the therapeutic strategy for HCV infection is genotype dependent. HCV recombination also raises many questions concerning its mechanisms and effects on the epidemiological and physiopathological features of the virus. This review provides an update on recombinant HCV strains, the process that gives rise to recombinants and clinical implications of recombination. © 2010 Blackwell Publishing Ltd.

Poly(3-Hydroxybutyrate) Synthesis Genes in Azotobacter sp. Strain FA8

OpenAIRE

Pettinari, M. Julia; Vázquez, Gustavo J.; Silberschmidt, Daniel; Rehm, Bernd; Steinbüchel, Alexander; Méndez, Beatriz S.

2001-01-01

Genes responsible for the synthesis of poly(3-hydroxybutyrate) (PHB) in Azotobacter sp. FA8 were cloned and analyzed. A PHB polymerase gene (phbC) was found downstream from genes coding for β-ketothiolase (phbA) and acetoacetyl-coenzyme A reductase (phbB). A PHB synthase mutant was obtained by gene inactivation and used for genetic studies. The phbC gene from this strain was introduced into Ralstonia eutropha PHB-4 (phbC-negative mutant), and the recombinant accumulated PHB when either glucos...

25 CFR 91.11 - Domestic animals in village reserves.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Domestic animals in village reserves. 91.11 Section 91.11... VILLAGES, OSAGE RESERVATION, OKLAHOMA § 91.11 Domestic animals in village reserves. (a) No livestock shall... owner of the animal, if known, by certified mail or by posting in the village square. The notice shall...

27 CFR 4.91 - List of approved prime names.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 1 2010-04-01 2010-04-01 false List of approved prime names. 4.91 Section 4.91 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS LABELING AND ADVERTISING OF WINE American Grape Variety Names § 4.91 List...

31 CFR 50.91 - Notice to Congress.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Notice to Congress. 50.91 Section 50... PROGRAM Cap on Annual Liability § 50.91 Notice to Congress. Pursuant to section 103(e)(3) of the Act, the Secretary shall provide an initial notice to Congress within 15 days of the certification of an act of...

7 CFR 29.91 - How to obtain an appeal.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false How to obtain an appeal. 29.91 Section 29.91... REGULATIONS TOBACCO INSPECTION Regulations Appeal § 29.91 How to obtain an appeal. An appeal shall be made in writing and filed with the Division or the office of inspection for the type of tobacco involved. Such...

Mechanical behavior and fracture characterization of the T91 martensitic steel in liquid sodium environment

International Nuclear Information System (INIS)

Hamdane, Ouadie

2012-01-01

The T91 martensitic steel is designed to constitute structural material of future sodium fast reactors of fourth generation, where it will be subjected to stresses in presence of liquid sodium. This study presents a qualitative and quantitative estimate of the sensitivity of T91 steel towards the phenomenon of liquid metal embrittlement. The effect of liquid sodium on T91 steel was studied and quantified according to the temperature and the cross head rate displacement, by using a set-up of Small Punch Test, three and four bending test, developed in laboratory. Mechanical tests in sodium environment are carried out inside a Plexiglas cell, conceived and developed at the laboratory. The atmosphere inside this cell is severely purified and controlled, in order to avoid on the one hand an explosive reaction of sodium with moisture, or an ignition with oxygen, and on the other hand to minimize the presence of impurities in liquid sodium used. The presence of sodium accelerates T91 steel fracture at low temperature, without modifying its ductile character. The T91 pre-immersion in sodium makes it possible to dissolve the protective layer of chromium oxide, and to obtain an intimate contact with the molten metal. However, pre-immersion generates a surface defects which cause a partial embrittlement by sodium. The hardening of T91 steel by heat treatment with a tempering temperature of 550 C (T91-TR550) causes a total embrittlement of steel in presence of sodium, with and without pre-immersion. The rupture of the T91-TR550 steel takes then place by intergranular de-cohesion, corresponding to the crack initiation phase, followed by laths de-cohesion, corresponding to the phase of propagation of these cracks. The mechanism suggested in this study is based on the intergranular penetration of sodium, supported by the presence of segregated impurities such phosphorus, and by the plastic deformation [fr

Activation of PKA in cell requires higher concentration of cAMP than in vitro: implications for compartmentalization of cAMP signalling.

Science.gov (United States)

Koschinski, Andreas; Zaccolo, Manuela

2017-10-26

cAMP is a ubiquitous second messenger responsible for the cellular effects of multiple hormones and neurotransmitters via activation of its main effector, protein kinase A (PKA). Multiple studies have shown that the basal concentration of cAMP in several cell types is about 1 μM. This value is well above the reported concentration of cAMP required to half-maximally activate PKA, which measures in the 100-300 nM range. Several hypotheses have been suggested to explain this apparent discrepancy including inaccurate measurements of intracellular free cAMP, inaccurate measurement of the apparent activation constant of PKA or shielding of PKA from bulk cytosolic cAMP via localization of the enzyme to microdomains with lower basal cAMP concentration. However, direct experimental evidence in support of any of these models is limited and a firm conclusion is missing. In this study we use multiple FRET-based reporters for the detection of cAMP and PKA activity in intact cells and we establish that the sensitivity of PKA to cAMP is almost twenty times lower when measured in cell than when measured in vitro. Our findings have important implications for the understanding of compartmentalized cAMP signalling.

Alloy Design of Martensitic 9Cr-Boron Steel for A-USC Boiler at 650 °C — Beyond Grades 91, 92 and 122

Science.gov (United States)

Abe, Fujio; Tabuchi, M.; Tsukamoto, S.

Boundary hardening is shown to be the most important strengthening mechanism in creep of tempered martensitic 9% Cr steel base metal and welded joints at 650 °C. The enrichment of soluble boron near prior austenite grain boundaries (PAGBs) by the GB segregation is essential for the reduction of coarsening rate of M23C6 carbides near PAGBs, enhancing the boundary and sub-boundary hardening near PAGBs, and also for the change in α/γ transformation behavior in heat-affected-zone (HAZ) of welded joints during heating of welding, producing the same microstructure in HAZ as in the base metal. Excess addition of nitrogen to the 9Cr-boron steel promotes the formation of boron nitrides during normalizing heat treatment, which consumes most of soluble boron and degrades the creep strength. A NIMS 9Cr steel (MARBN; Martensitic 9Cr steel strengthened by boron and MX nitrides) with 120-150 ppm boron and 60-90 ppm nitrogen, where no boron nitride forms during normalizing heat treatment, exhibits not only much higher creep strength of base metal than Grades 91, 92 and 122 but also substantially no degradation in creep strength due to Type IV fracture in HAZ of welded joints at 650°C. The protective Cr2O3-rich scale forms on the surface of 9Cr steel by pre-oxidation treatment in Ar gas, which significantly improves the oxidation resistance in steam at 650°C.

Aumento en la resistencia a la corrosión de un acero t91 aluminizado

OpenAIRE

QUINTERO, LUZ S.; LAVERDE, DIONISIO; ESCALANTE, HUMBERTO

2011-01-01

El acero ferrítico T91 ha sido ampliamente utilizado en plantas de generación de energía eléctrica, calderas y plantas nucleares. Sin embargo, su resistencia a la oxidación se ve gravemente afectada a temperaturas superiores a los 600ºC. En esta investigación se empleó la técnica de cementación empacada para aluminizar un acero T91 y se encontraron las condiciones óptimas para la formación de un recubrimiento libre de porosidad y con espesor uniforme (300 micras). Se evaluó la capa de óxido f...

49 CFR 383.91 - Commercial motor vehicle groups.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Commercial motor vehicle groups. 383.91 Section 383.91 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL MOTOR CARRIER SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS COMMERCIAL...

7 CFR 91.24 - Reports of test results.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Reports of test results. 91.24 Section 91.24 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE (CONTINUED) COMMODITY LABORATORY TESTING PROGRAMS...

Study on fluidity of squeeze cast AZ91D magnesium alloy with different wall thicknesses

Directory of Open Access Journals (Sweden)

Chen Yun

2014-03-01

Full Text Available Rectangular cross-section specimens with different section thicknesses were prepared to study the influences of pouring temperature, mould temperature and squeeze velocity on the fluidity of squeeze cast AZ91D magnesium alloy by means of orthogonal test design method. The results show that pouring temperature, mould temperature and squeeze velocity can significantly affect the fluidity of magnesium alloy specimens with wall thickness no more than 4 mm, and the pouring temperature is the most influential factor on the fluidity of specimens with wall thickness of 1, 2 and 3 mm, while mould temperature is the one for specimens with wall thickness of 4 mm. Increasing pouring temperature between 700 °C and 750 °C is beneficial to the fluidity of AZ91D magnesium alloy, and increasing mould temperature significantly enhances the filling ability of thick (3 and 4 mm section castings. The fluidity of squeeze cast magnesium alloy increases with the increase of wall thickness. It is not recommended to produce magnesium alloy casting with wall thickness of smaller than 3 mm by squeeze cast process due to the poor fluidity. The software DPS was used to generate the regression model, and linear regression equations of the fluidity of squeeze cast AZ91D with different wall thicknesses are obtained using the test results.

40 CFR 91.1002 - Definitions.

Science.gov (United States)

2010-07-01

... business for product development, production method assessment, or market promotion purposes. Testing exemption means an exemption which may be granted under § 91.1104(b) for the purpose of research...

Reliability assessment of creep rupture life for Gr. 91 steel

International Nuclear Information System (INIS)

Kim, Woo-Gon; Park, Jae-Young; Kim, Seon-Jin; Jang, Jinsung

2013-01-01

Highlights: • Statistical analysis of a number of creep rupture data based on Z parameter. • Determination of the constant C in LM parameter and long-term creep life prediction. • Generation of random variables for Z s and Z cr by Monte-Carlo simulation in a SCRI model. • Examples for design application were reasonably drawn from the viewpoints of reliability. - Abstract: This paper presents reliability assessment of the long-term creep life of Gr. 91 steel, which is a major structural material for high temperature structural components of Generation-IV reactor systems. A number of creep rupture data for Gr. 91 steel were collected through literature surveys, and the long-term creep life was predicted by Larson–Miller parameter. A “Z parameter” method was used to describe the magnitude of the deviation of the creep rupture data to a master curve. A “Service Condition-creep Rupture property Interference (SCRI) model” based on the Z parameter was used to simultaneously consider the scattering of the creep rupture data of materials and the fluctuations of service conditions in reliability assessment. A statistical analysis of the creep rupture data was conducted by the Z parameter. To carry out the SCRI model, a number of random variables for Z s describing service conditions and Z cr describing the dispersion of the creep rupture data were generated using a Monte-Carlo simulation technique. As examples for application, the creep rupture life under a certain service conditions of Gr. 91 steel was reasonably drawn from the viewpoints of reliability

14 CFR 91.119 - Minimum safe altitudes: General.

Science.gov (United States)

2010-01-01

... than 500 feet to any person, vessel, vehicle, or structure. (d) Helicopters. Helicopters may be... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Minimum safe altitudes: General. 91.119 Section 91.119 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION...

28 CFR 91.67 - State Environmental Policy Acts.

Science.gov (United States)

2010-07-01

... Section 91.67 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) GRANTS FOR CORRECTIONAL FACILITIES Environmental Impact Review Procedures for VOI/TIS Grant Program Other State and Federal Law Requirements § 91... that any state, local, or tribal environmental impact review requirements similar to the Federal NEPA...

A Novel Apoptosis Correlated Molecule: Expression and Characterization of Protein Latcripin-1 from Lentinula edodes C_91–3

Directory of Open Access Journals (Sweden)

Min Huang

2012-05-01

Full Text Available An apoptosis correlated molecule—protein Latcripin-1 of Lentinula edodes C_91-3—was expressed and characterized in Pichia pastoris GS115. The total RNA was obtained from Lentinula edodes C_91–3. According to the transcriptome, the full-length gene of Latcripin-1 was isolated with 3'-Full Rapid Amplification of cDNA Ends (RACE and 5'-Full RACE methods. The full-length gene was inserted into the secretory expression vector pPIC9K. The protein Latcripin-1 was expressed in Pichia pastoris GS115 and analyzed by Sodium Dodecylsulfonate Polyacrylate Gel Electrophoresis (SDS-PAGE and Western blot. The Western blot showed that the protein was expressed successfully. The biological function of protein Latcripin-1 on A549 cells was studied with flow cytometry and the 3-(4,5-Dimethylthiazol-2-yl-2,5-Diphenyl-tetrazolium Bromide (MTT method. The toxic effect of protein Latcripin-1 was detected with the MTT method by co-culturing the characterized protein with chick embryo fibroblasts. The MTT assay results showed that there was a great difference between protein Latcripin-1 groups and the control group (p < 0.05. There was no toxic effect of the characterized protein on chick embryo fibroblasts. The flow cytometry showed that there was a significant difference between the protein groups of interest and the control group according to apoptosis function (p < 0.05. At the same time, cell ultrastructure observed by transmission electron microscopy supported the results of flow cytometry. The work demonstrates that protein Latcripin-1 can induce apoptosis of human lung cancer cells A549 and brings new insights into and advantages to finding anti-tumor proteins.

High Temperature Oxidation Behavior of T91 Steel in Dry and Humid Condition

Directory of Open Access Journals (Sweden)

Yonghao Leong

2016-09-01

Full Text Available High temperature oxidation behavior of T91 ferritic/martensitic steel was examined over the temperature range of 500 to 700°C in dry and humid environments.  The weight gain result revealed that oxidation occurs at all range of temperatures and its rate is accelerated by increasing the temperature. The weight gain of the oxidized steel at 700°C in steam condition was six times bigger than the dry oxidation.. SEM/EDX of the cross-sectional image showed that under dry condition, a protective and steady growth of the chromium oxide (Cr2O3 layer was formed on the steel with the thickness of 2.39±0.34 µm. Meanwhile for the humid environment, it is found that the iron oxide layer, which consists of the hematite (Fe2O3 and magnetite (Fe3O4 was formed as the outer scale, and spinnel as inner scale. This result indicated that the oxidation behavior of T91 steel was affected by its oxidation environment. The existence of water vapor in steam condition may prevent the formation of chromium oxide as protective layer.

'LDL-C' = LDL-C + Lp(a)-C: implications of achieved ultra-low LDL-C levels in the proprotein convertase subtilisin/kexin type 9 era of potent LDL-C lowering.

Science.gov (United States)

Yeang, Calvin; Witztum, Joseph L; Tsimikas, Sotirios

2015-06-01

The measurement that is termed 'LDL-cholesterol' (LDL-C) includes the cholesterol content of lipoprotein(a) [Lp(a)-C], which can contribute approximately 30-45% to measured LDL-C levels as a percentage of its mass. We review the implications of achieved very low LDL-C levels in patients treated with potent LDL-C-lowering agents in the context of varying Lp(a) levels. Combination therapy with statins, ezetimibe, and proprotein convertase subtilisin/kexin type 9 (PCSK9) inhibitors can lower LDL-C to unprecedentedly low levels. Recent PCSK9 trials have shown that routine achievement of mean LDL-C less than 50 mg/dl is feasible, along with the modest reductions in Lp(a). Many patients will achieve LDL-C less than 25 mg/dl with concomitantly elevated Lp(a) levels that contribute substantially to the measured 'LDL-C'. Therefore, it is possible that some of these patients may have little to no circulating LDL-C. As the new era of ultralow LDL-C levels ensues, it is imperative to understand the contribution of Lp(a)-C to measured LDL-C and the consequences of achieving ultralow or potentially absent LDL-C in the setting of elevated Lp(a) levels and possibly free apo(a). We review this concept and suggest avenues of research, including analyses of existing datasets in current clinical trials and new research studies, to understand its pathophysiological and clinical significance.

Coastal flood implications of 1.5°C, 2°C and 2.5°C global mean temperature stabilization targets for small island nations

Science.gov (United States)

Rasmussen, D.; Buchanan, M. K.; Kopp, R. E.; Oppenheimer, M.

2017-12-01

Sea-level rise (SLR) is magnifying the frequency and severity of flooding in coastal regions. The rate and amount of global-mean SLR is a function of the trajectory of the global mean surface temperature (GMST). Therefore, temperature stabilization targets (e.g., 1.5°C or 2°C, as from the Paris Agreement) have important implications for regulating coastal flood risk. Quantifying the differences in the impact from SLR between these and other GMST stabilization targets is necessary for assessing the benefits and harms of mitigation goals. Low-lying small island nations are particularly vulnerable to inundation and coastal flooding from SLR because building protective and resilient infrastructure may not be physically or economically feasible. For small island nations, keeping GMST below a specified threshold may be the only option for maintaining habitability. Here, we assess differences in the return levels of coastal floods for small island nations between 1.5°C, 2.0°C, and 2.5°C GMST stabilization. We employ probabilistic, localized SLR projections and long-term hourly tide gauge records to construct estimates of local flood risk. We then estimate the number of small island nations' inhabitants at risk for permanent inundation under different GMST stabilization targets.

40 CFR 91.123 - Denial, revocation of certificate of conformity.

Science.gov (United States)

2010-07-01

... conformity. 91.123 Section 91.123 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Certification Provisions § 91.123 Denial, revocation of certificate of conformity. (a) If, after review of the... conformity if the Administrator finds any one of the following infractions to be substantial: (1) The engine...

27 CFR 24.91 - Conveyance of untaxpaid wine or spirits.

Science.gov (United States)

2010-04-01

... wine or spirits. 24.91 Section 24.91 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY LIQUORS WINE Administrative and Miscellaneous Provisions Conveyance of Wine Or Spirits on Wine Premises § 24.91 Conveyance of untaxpaid wine or spirits. Untaxpaid...

Toxicity of inhaled 91YCl3 in beagle dogs. VII

International Nuclear Information System (INIS)

Muggenburg, B.A.; Benjamin, S.A.; Boecker, B.B.; McClellan, R.O.

1974-01-01

Studies on the metabolism, dosimetry, and effects of inhaled 91 YCl 3 in Beagle dogs are being continued to provide information that will aid in assessing the biological consequences of nuclear accidents in which 91 Y or other radionuclides that produce a similar radiation dose pattern may be released. Forty-two dogs with 91 Y initial body burdens from 64 to 1300 μCi/kg body weight were placed in four groups with mean lung burdens of 310, 180, 75, and 40 μCi/kg body weight. These dogs and 12 control dogs are being maintained for lifetime observation. An additional group of four dogs with a mean initial 91 Y body burden of 180 μCi/kg body weight were placed in a sacrifice study. Eleven dogs within the highest activity level groups died or were euthanized at 12 to 33 days after inhalation of 91 Y with changes related to severe bone marrow damage and associated paycytopenia. Two dogs died approximately one year after 91 Y inhalation with convulsive seizures that were presumed to be unrelated to the 91 Y exposure. Four 91 Y-exposed dogs died or were euthanized due to neoplasms 2000 to 2560 days after exposure. Two dogs had squamous cell carcinomas involving the maxillary and nasal regions, one a bronchiolo-alveolar carcinoma of the lung and another, a mast cell sarcoma. One control dog died of empyema. Serial observations are continuing on all surviving dogs. (U.S.)

Toxicity of inhaled 91YCl3 in beagle dogs. X

International Nuclear Information System (INIS)

Muggenburg, B.A.; Benjamin, S.A.; Boecker, B.B.; McClellan, R.O.

1976-01-01

Studies on the metabolism, dosimetry, and effects of inhaled 91 YCl 3 in Beagle dogs are being continued to provide information that will aid in assessing the biological consequences of nuclear accidents in which 91 Y or other radionuclides that produce a similar radiation dose pattern may be released. Forty-two dogs with 91 Y initial body burdens from 64 to 1300 μCi/kg body weight were placed in four groups with mean lung burdens of 310, 180, 75 and 40 μCi/kg body weight. These dogs and 12 control dogs are being maintained for lifetime observation. An additional group of four dogs with a mean initial 91 Y body burden of 180 μCi/kg body weight were placed in a sacrifice study. Eleven dogs within the highest activity level groups died or were euthanized at 12 to 33 days after inhalation of 91 Y with changes related to severe bone marrow damage and associated pancytopenia. Two dogs died approximately 1 yr after 91 Y inhalation with convulsive seizures that were presumed to be unrelated to the 91 Y exposure. Five 91 Y-exposed dogs died or were euthanized due to neoplasms 2000 to 3341 days after exposure. Three dogs had nasal squamous cell carcinomas, one had a bronchioloalveolar carcinoma and another, a mast cell sarcoma. One dog died of renal failure 2660 days after exposure and one control dog died of empyema. Serial observations are continuing on all surviving dogs

22 CFR 40.91 - Certain aliens previously removed.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Certain aliens previously removed. 40.91... IMMIGRANTS UNDER THE IMMIGRATION AND NATIONALITY ACT, AS AMENDED Aliens Previously Removed § 40.91 Certain aliens previously removed. (a) 5-year bar. An alien who has been found inadmissible, whether as a result...

50 CFR 20.91 - Commercial use of feathers.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 6 2010-10-01 2010-10-01 false Commercial use of feathers. 20.91 Section 20.91 Wildlife and Fisheries UNITED STATES FISH AND WILDLIFE SERVICE, DEPARTMENT OF THE INTERIOR.... Any person may possess, purchase, sell, barter, or transport for the making of fishing flies, bed...

46 CFR 91.60-15 - Cargo Ship Safety Radio Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo Ship Safety Radio Certificate. 91.60-15 Section 91... VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 91.60-15 Cargo Ship Safety Radio Certificate. Every vessel equipped with a radio installation on...

NUKEM. Annual report 1990/91

International Nuclear Information System (INIS)

1992-01-01

The tasks and activities of this enterprise of the German nuclear industry are reviewed. The financial statement for 1990/91 comprises a large number of financial data (balance steet, profit- and loss account, etc). (UA) [de

14 CFR 91.155 - Basic VFR weather minimums.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Basic VFR weather minimums. 91.155 Section...) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Flight Rules Visual Flight Rules § 91.155 Basic VFR weather minimums. (a) Except as provided in paragraph (b) of this section and...

40 CFR 91.409 - Engine dynamometer test run.

Science.gov (United States)

2010-07-01

... at rated speed and maximum power for 25 to 30 minutes; (iv) Option. For four-stroke engines, where... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine dynamometer test run. 91.409... (CONTINUED) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES Gaseous Exhaust Test Procedures § 91.409...

Daresbury 1990/91

International Nuclear Information System (INIS)

1991-01-01

This report highlights some of the diverse range of work engaged in at the Daresbury Laboratory of the United Kingdom Science and Engineering Research Council in 1990/91. It contains brief descriptions of the Laboratory's facilities and research programmes. These fall into three main areas; theory, computational science and computing; lower temperature nuclear physics using the Nuclear Structure Facility; and the development and application of the synchrotron radiation source. Separate appendices to the report cover these areas in greater detail. (UK)

29 CFR 1917.91 - Eye and face protection.

Science.gov (United States)

2010-07-01

... 29 Labor 7 2010-07-01 2010-07-01 false Eye and face protection. 1917.91 Section 1917.91 Labor... with any of the following consensus standards: (A) ANSI Z87.1-2003, “American National Standard... accordance with one of the above consensus standards will be deemed to be in compliance with the requirements...

Influence of heat treatment on the machinability and corrosion behavior of AZ91 Mg alloy

Directory of Open Access Journals (Sweden)

Swetha Chowdary V

2018-03-01

Full Text Available In the present study, AZ91 Mg alloy was heat treated at 410 °C for 6, 12 and 24 h to investigate the influence of heat treatment on machinability and corrosion behavior. The effect of soaking time on the amount and distribution of Mg17Al12 (β – phase was analyzed under the optical microscope. Microhardness measurements demonstrated the increased hardness with increased heat treatment soaking time, which can be attributed to the solid solution strengthening. The influence of super saturated α-grains on reducing the cutting force (Fz with respect to increased cutting speed was observed as prominent. The corrosion behavior of the heat treated specimens was studied by conducting electrochemical tests. Surprisingly, corrosion rate of heat treated samples was observed as increased compared with the base material. From the results, it is evident that the machinability of AZ91 Mg alloy can be improved by producing super saturated α-grains through heat treatment but at the cost of losing corrosion resistance. Keywords: AZ91 Mg alloy, Solid solution, Turning, Corrosion, Machinability

50 CFR 216.91 - Dolphin-safe labeling standards.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 7 2010-10-01 2010-10-01 false Dolphin-safe labeling standards. 216.91... MAMMALS Dolphin Safe Tuna Labeling § 216.91 Dolphin-safe labeling standards. (a) It is a violation of... include on the label of those products the term “dolphin-safe” or any other term or symbol that claims or...

31 CFR 91.11 - Dogs and other animals.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Dogs and other animals. 91.11 Section... CONDUCT IN OR ON THE BUREAU OF THE MINT BUILDINGS AND GROUNDS § 91.11 Dogs and other animals. Dogs and other animals, except seeing-eye dogs, shall not be brought upon the property for other than official...

31 CFR 91.14 - Penalties and other law.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Penalties and other law. 91.14... CONDUCT IN OR ON THE BUREAU OF THE MINT BUILDINGS AND GROUNDS § 91.14 Penalties and other law. Whoever...). Nothing contained in the regulations in this part shall be construed to abrogate any other Federal laws or...

Effect of a 91 day long stay in weightlessness on the International Space Station on mouse skin physiology

Data.gov (United States)

National Aeronautics and Space Administration — Comparitive gene expression in skin between mice maintained in microgravity (0g) and normogravity (1g) environment. Six male C57Bl/J10 mice were housed for 91 days...

Investigating liquid-metal embrittlement of T91 steel by fracture toughness tests

Energy Technology Data Exchange (ETDEWEB)

Ersoy, Feyzan, E-mail: fersoy@sckcen.be [SCK-CEN (Belgian Nuclear Research Centre), Boeretang 200, B-2400, Mol (Belgium); Department of Materials Science and Engineering, Ghent University (UGent), Technologiepark 903, B-9052, Ghent (Belgium); Gavrilov, Serguei [SCK-CEN (Belgian Nuclear Research Centre), Boeretang 200, B-2400, Mol (Belgium); Verbeken, Kim [Department of Materials Science and Engineering, Ghent University (UGent), Technologiepark 903, B-9052, Ghent (Belgium)

2016-04-15

Heavy liquid metals such as lead bismuth eutectic (LBE) are chosen as the coolant to innovative Generation IV (Gen IV) reactors where ferritic/martensitic T91 steel is a candidate material for high temperature applications. It is known that LBE has a degrading effect on the mechanical properties of this steel. This degrading effect, which is known as liquid metal embrittlement (LME), has been screened by several tests such as tensile and small punch tests, and was most severe in the temperature range from 300 °C to 425 °C. To meet the design needs, mechanical properties such as fracture toughness should be addressed by corresponding tests. For this reason liquid-metal embrittlement of T91 steel was investigated by fracture toughness tests at 350 °C. Tests were conducted in Ar-5%H{sub 2} and LBE under the same experimental conditions Tests in Ar-5%H{sub 2} were used as reference. The basic procedure in the ASTM E 1820 standard was followed to perform tests and the normalization data reduction (NDR) method was used for the analysis. Comparison of the tests demonstrated that the elastic–plastic fracture toughness (J{sub 1C}) of the material was reduced by a factor in LBE and the fracture mode changed from ductile to quasi-cleavage. It was also shown that the pre-cracking environment played an important role in observing LME of the material since it impacts the contact conditions between LBE and steel at the crack tip. It was demonstrated that when specimens were pre-cracked in air and tested in LBE, wetting of the crack surface by LBE could not be achieved. When specimens were pre-cracked in LBE though, they showed a significant reduction in fracture toughness.

The frequency of A91V in the perforin gene and the effect of tumor necrosis factor-α promoter polymorphism on acquired hemophagocytic lymphohistiocytosis

Directory of Open Access Journals (Sweden)

Hamza Okur

2011-06-01

Full Text Available Objective: Numerous acquired etiological factors, such as infections, malignancies, and collagen tissue disorders, are involved in the development of acquired hemophagocytic lymphohistiocytosis (AHLH. Not everyone with the same etiological factors developments AHLH, which suggests the role of additional genetic or environmental predisposing factors that remain to be identified. Materials and Methods: Perforin gene A91V missense transition (C>T change at position 272 in exon 2 of the perforin gene and TNF-α gene promoter-1031 T>C nucleotide substitution are 2 candidate genetic predisposing factors due to their potential to alter inflammatory responses. In the present study these changes were investigated in healthy controls and AHLH patients.Results: A91V transition was observed in 7 of the 159 (4.4% controls. Among the 44 AHLH patients, 5 (11.3% were heterozygous and the difference in the frequency of A91V transition, although striking (odds ratio: 2.8, was not statistically significant (p=0.09. All A91V-positive patients had infection. TNF-α-1031 T>C polymorphism was examined in 164 healthy controls and 40 AHLH patients, and the CC risk-elevating genotype was noted in 7 (4.3% of the controls and 1 (2.5% of the AHLH patients. The frequency of C and T alleles was 22.5% (n=18 and 77.5% (n=62 among the AHLH patients, and 22% (n=72 and 78% (n=259 among the controls, respectively. There wasn’t a statistically significant difference between the groups in terms of allele frequencies (p>0.05.Conclusion: The present results indicate that compared to controls, A91V mutation was 2.8-fold more prevalent (according to the odds ratio in the AHLH patients. A91V mutation is not uncommon in the general population and increases the risk of AHLH in patients with an underlying condition, especially those with an underlying infection.

Statistical summary 1990-91

International Nuclear Information System (INIS)

1991-01-01

The information contained in this statistical summary leaflet summarizes in bar charts or pie charts Nuclear Electric's performance in 1990-91 in the areas of finance, plant and plant operations, safety, commercial operations and manpower. It is intended that the information will provide a basis for comparison in future years. The leaflet also includes a summary of Nuclear Electric's environmental policy statement. (UK)

Toxicity of inhaled 91YCl3 in beagle dogs. XI

International Nuclear Information System (INIS)

Muggenburg, B.A.; Rebar, A.H.; Benjamin, S.A.; Boecker, B.B.; Jones, R.K.; McClellan, R.O.; Pickrell, J.A.

1977-01-01

Studies on the metabolism, dosimetry and effects of inhaled 91 YCl 3 in Beagle dogs are being continued to provide information that will aid in assessing the biological consequences of nuclear accidents in which 91 Y or other radionuclides that produce a similar radiation dose pattern may be released. Forty-two dogs with 91 Y initial body burdens from 64 to 1300 μCi/kg body weight were placed in four groups with mean lung burdens of 310, 180, 75 and 40 μCi/kg body weight. These dogs and 12 control dogs are being maintained for lifetime observation. An additional group of four dogs with a mean initial 91 Y body burden of 180 μCi/kg body weight were placed in a sacrifice study. Twenty-one of the exposed dogs have died and two of the control dogs have died. Eleven dogs within the highest activity level groups died or were euthanized at 12 to 33 days after inhalation of 91 Y with changes related to severe bone marrow damage and associated pancytopenia. Two dogs died approximately one year after 91 Y inhalation with convulsive seizures that were presumed to be unrelated to the 91 Y exposure. Seven 91 Y-exposed dogs died or were euthanized due to neoplasms 2000 to 3341 days after exposure. Three dogs had nasal squamous cell carcinomas, one had a bronchioloalveolar carcinoma, one, a mast cell sarcoma, one a mammary adenocarcinoma and one with a malignant lymphoma. One dog died of renal failure 2660 days after exposure, one control dog died of empyema and another control dog died with a mammary adenocarcinoma. Serial observations are continuing on all surviving dogs

{sup 91}Nb(p,γ) or there and back again

Energy Technology Data Exchange (ETDEWEB)

Thomas, Benedikt; Glorius, Jan; Reich, Markus; Reifarth, Rene; Sonnabend, Kerstin [Goethe University Frankfurt a.M. (Germany); Blazhev, Andrey; Zell, Karl-Oscar [University of Cologne (Germany); Dressler, Rugard; Schumann, Dorothea [Paul-Scherrer Institute, Villigen (Switzerland); Giesen, Ulrich [Physikalisch-Technische Bundesanstalt, Braunschweig (Germany); Kritcka, Milan [Charles University, Prague (Czech Republic)

2016-07-01

The cross section of the reaction {sup 91}Nb(p,γ){sup 92}Mo is of special interest to answer questions about the production of the most abundant p nucleus {sup 92}Mo. With {sup 91}Nb being a radioactive nucleus the measurement of this reaction in standard kinematics is a big challenge. To produce a sufficient number of {sup 91}Nb isotopes an enriched {sup 92}Mo target was activated by protons at E{sub p} = 19 MeV. Afterwards the produced {sup 91}Nb isotopes are separated chemically and applied onto a tungsten backing. This leads to approximately 10{sup 16} {sup 91}Nb isotopes. The high proton current delivered by the HF-linear-accelerator FRANZ currently built at Goethe University Frankfurt, Germany, enables the execution of measurement with such limited amount of target material. The goal of our investigation is the determination of the cross section of the {sup 91}Nb(p,γ){sup 92}Mo reaction at 2 MeV proton energy and thereby in the astrophysical relevant energy region. We present the current status and the next steps towards the measurement of this cross section.

Implications of RDoC for the research and practice of psychotherapy.

Science.gov (United States)

Hershenberg, Rachel; Goldfried, Marvin R

2015-03-01

The field of psychotherapy is at an important juncture. Recent changes in the field include (a) the skeptical reception of the fifth edition of the Diagnostic and Statistical Manual and (b) NIMH's prioritization of an alternative classification system to guide translational and intervention research. Moreover, (c) the field continues to be held accountable to governmental agencies and third-party payers to demonstrate its empirical basis. Thus, psychological research as it relates to the practice of psychotherapy is at a crossroads. In this article, we provide a brief overview of several generations of psychotherapy outcome research, including the consequences that followed in the 1980s as psychotherapy research moved toward randomized controlled trials for clinical disorders. We delineate the inherent strengths and limitations of this movement and address how the NIMH has recently responded with the Research Domain Criteria (RDoC). We then address philosophical and practical implications of the emphasis on a neuroscientific conceptualization of psychological problems. Finally, we discuss opportunities for a next generation of convergent science that incorporates, rather than replaces, psychosocial variables across stages of translational research and treatment development. Copyright © 2014. Published by Elsevier Ltd.

14 CFR 91.1003 - Management contract between owner and program manager.

Science.gov (United States)

2010-01-01

... program manager. 91.1003 Section 91.1003 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... RULES Fractional Ownership Operations § 91.1003 Management contract between owner and program manager. Each owner must have a contract with the program manager that— (a) Requires the program manager to...

40 CFR 91.511 - Suspension and revocation of certificates of conformity.

Science.gov (United States)

2010-07-01

... certificates of conformity. 91.511 Section 91.511 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Production Line Testing Program § 91.511 Suspension and revocation of certificates of conformity. (a) The certificate of conformity is automatically suspended with respect to any engine failing pursuant to paragraph...

Phases Evolution of an ASTM 335 steel under continuous cooling P91

International Nuclear Information System (INIS)

Carrizo, D.A; Danon, C.A; Ramos, C.P

2012-01-01

This paper studies the influence of the cooling rate on phase transformations and the resulting microstructure in continuous cooling cycles for an ASTM A335 P91 steel, under fixed austenization conditions. The CCT (Continuous Cooling Transformation) diagram of this material is reported in the literature, so the main phase fields are known. The final structure of the samples depends on the austenitic grain size and the cooling rate. The studied samples were austenized at 1050 o C for 30 minutes and then cooled at different rates between 50 o C/h and 300 o C/h. The identification and characterization of the phases was carried out by using Scanning Electron Microscopy, X-ray Diffraction and Moessbauer Spectroscopy. From the results so obtained, additions to the CCT diagram of the material are proposed, providing new information to it

22 CFR 226.91 - Marking.

Science.gov (United States)

2010-04-01

... Relations AGENCY FOR INTERNATIONAL DEVELOPMENT ADMINISTRATION OF ASSISTANCE AWARDS TO U.S. NON-GOVERNMENTAL ORGANIZATIONS Miscellaneous § 226.91 Marking. (a) USAID policy is that all programs, projects, activities... support of the American people through the United States Agency for International Development (USAID). The...

Effect of ECAP on microstructure and mechanical properties of cast AZ91 magnesium alloy

International Nuclear Information System (INIS)

Chung, C W; Gao, W; Ding, R G; Chiu, Y L

2010-01-01

An as-cast AZ91 magnesium alloy was processed by Equal Channel Angular Pressing (ECAP) at 320 0 C. The microstructure and mechanical properties were studied. It has been found that ECAP refines both the grains and precipitates, thus modifies the strength and ductility of the processed alloy. After the first pass of ECAP, the yield stress improves significantly from 71 MPa to 140 MPa.

Australian Mining's product register 1990-91

Energy Technology Data Exchange (ETDEWEB)

1990-01-01

The Australian Minings' Product Register 1990-91 contains an industry review, resource assessment, mineral industry statistics, directory of exploration and mining companies, buyers guide and directory of consultants.

Electrochemical corrosion behavior of AZ91D alloy in ethylene glycol

International Nuclear Information System (INIS)

Fekry, A.M.; Fatayerji, M.Z.

2009-01-01

The effect of concentration on the corrosion behavior of Mg-based alloy AZ91D was investigated in ethylene glycol-water solutions using electrochemical techniques i.e. potentiodynamic polarization, electrochemical impedance measurements (EIS) and surface examination via scanning electron microscope (SEM) technique. This can provide a basis for developing new coolants for magnesium alloy engine blocks. Corrosion behavior of AZ91D alloy by coolant is important in the automotive industry. It was found that the corrosion rate of AZ91D alloy decreased with increasing concentration of ethylene glycol. For AZ91D alloy in chloride >0.05 M or fluoride 0.05 M for fluoride containing ethylene glycol solution, some inhibition effect has been observed. The corrosion of AZ91D alloy in the blank can be effectively inhibited by addition of 0.05 mM paracetamol that reacts with AZ91D alloy and forms a protective film on the surface at this concentration as confirmed by surface examination.

7 CFR 91.102 - Form of official identification symbols.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Form of official identification symbols. 91.102... LABORATORY TESTING PROGRAMS SERVICES AND GENERAL INFORMATION Designation of Approved Symbols for Identification of Commodities Officially Tested By AMS § 91.102 Form of official identification symbols. Two...

10 CFR 51.91 - Final environmental impact statement-contents.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Final environmental impact statement-contents. 51.91... Implementing Section 102(2) Final Environmental Impact Statements-General Requirements § 51.91 Final environmental impact statement—contents. (a)(1) The final environmental impact statement will include responses...

40 CFR 91.406 - Engine parameters to be measured and recorded.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine parameters to be measured and recorded. 91.406 Section 91.406 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... Procedures § 91.406 Engine parameters to be measured and recorded. Measure or calculate, then record, the...

40 CFR 91.122 - Amending the application and certificate of conformity.

Science.gov (United States)

2010-07-01

... certificate of conformity. 91.122 Section 91.122 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Standards and Certification Provisions § 91.122 Amending the application and certificate of conformity. (a... to a certificate of conformity or changes are to be made to a product line covered by a certificate...

9 CFR 91.15 - Inspection of animals for export.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Inspection of animals for export. 91.15 Section 91.15 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS...

9 CFR 91.16 - Certification of animals for export.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 1 2010-01-01 2010-01-01 false Certification of animals for export. 91.16 Section 91.16 Animals and Animal Products ANIMAL AND PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE EXPORTATION AND IMPORTATION OF ANIMALS (INCLUDING POULTRY) AND ANIMAL PRODUCTS...

Comparative action spectra for pyrimidine dimer formation in Cloudman S91 mouse melanoma and EMT6 mouse mammary carcinoma cells

Energy Technology Data Exchange (ETDEWEB)

Hill, H Z [New Jersey, Medical School, Newark (USA); Setlow, R B [Brookhaven National Lab., Upton, NY (USA)

1982-05-01

Pyrimidine dimer formation in melanotic mouse melanoma cells, Cloudman S91H-, and in mouse mammary carcinoma cells, EMT6, was compared as a function of wavelength by irradiating equal numbers of cells from the two cell lines simultaneously. More dimers were formed in EMT6 than in S91H- by light of wavelengths less than 289nm, while light of higher wavelengths caused equivalent dimer formation, as measured by the Micrococcus luteus UV-endonuclease assay. The cells of S91H- are lightly melanotic, yet shielding at lower wavelengths is considerable. It is speculated that melanin pigmentation arose by selection during an evolutionary period when UV-C light reaching the earth's surface was significantly greater than it is today.

27 CFR 53.91 - Charges to be included in sale price.

Science.gov (United States)

2010-04-01

... or display of the article, for sales promotion programs, or otherwise. With respect to the rules... sale price. 53.91 Section 53.91 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND... AMMUNITION Special Provisions Applicable to Manufacturers Taxes § 53.91 Charges to be included in sale price...

FY17 Status Report on the Initial Development of a Constitutive Model for Grade 91 Steel

Energy Technology Data Exchange (ETDEWEB)

Messner, M. C. [Argonne National Lab. (ANL), Argonne, IL (United States); Phan, V. -T. [Argonne National Lab. (ANL), Argonne, IL (United States); Sham, T. -L. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-07-01

Grade 91 is a candidate structural material for high temperature advanced reactor applications. Existing ASME Section III, Subsection HB, Subpart B simplified design rules based on elastic analysis are setup as conservative screening tools with the intent to supplement these screening rules with full inelastic analysis when required. The Code provides general guidelines for suitable inelastic models but does not provide constitutive model implementations. This report describes the development of an inelastic constitutive model for Gr. 91 steel aimed at fulfilling the ASME Code requirements and being included into a new Section III Code appendix, HBB-Z. A large database of over 300 experiments on Gr. 91 was collected and converted to a standard XML form. Five families of Gr. 91 material models were identified in the literature. Of these five, two are potentially suitable for use in the ASME code. These two models were implemented and evaluated against the experimental database. Both models have deficiencies so the report develops a framework for developing and calibrating an improved model. This required creating a new modeling method for representing changes in material rate sensitivity across the full ASME allowable temperature range for Gr. 91 structural components: room temperature to 650° C. On top of this framework for rate sensitivity the report describes calibrating a model for work hardening and softening in the material using genetic algorithm optimization. Future work will focus on improving this trial model by including tension/compression asymmetry observed in experiments and necessary to capture material ratcheting under zero mean stress and by improving the optimization and analysis framework.

99MTC-HL91 spect image versus 18F-FDG PET for detection of head and neck carcinoma

International Nuclear Information System (INIS)

Chu, L.S.; Liu, R.S.; Chou, K.L.; Yang, B.H.; Liao, S.Q.; Yeh, S.H.

2004-01-01

Objective: Tumor hypoxia is a major complication of oncologic cell switch for chemotherapy(C/T) and / or radiotherapy(R/T). Such lesions detected by selective modem conventional examination remains difficult. 99mTc-HL91 is a potential agent for imaging hypoxic tissue in vivo. This study aimed to assess efficacy of 99mTc- HL91 in imaging of head and neck cancer and compared the result with 18F-fluorodeoxyglucose(FDG)PET. Methods: Sixteen pts with head and neck cancers (7 hypopharyngeal cancers, 4 laryngeal cancers, 5 tongue base cancers) were enrolled in this study. Primary tumors and suspicious local,regional metastases were diagnosed by clinical examination, CT/MRI , and biopsy. After intravenous injection of 740 MBq of 99mTc-HL91, whole body planar scan and regional SPECT at 2hr postinjection were performed. Tumor lesion -to- normal background(T/N) ratios with 3x3 pixels of background ROI were also measured. The reference range of T/N ratio greater 3.0 defined +, close to 2.4 defined +/- and less than 1.5 defined as -. The FDG images with dedicated PET system was performed at 4hr after completion of 99mTc-HL91 study. The visualized tumors uptake with ratio of standardized uptake value (SUV) greater than 2.5 defined as +.. less than 2.5 defined -. Results: In 7 hypopharyngeal cancers, there are 2FDG+/HL91+, 3FDG+/HL91-, 2FDG+/HL91+/-, In 4 laryngeal cancers, there are 3FDG+/HL91-, 1FDG+/HL91 +/-. In 5 tongue base cancers, there are 5FDG+/HL91-.(Table 1). The T/N ratios of all head and neck cancers in primary tumor and regional lymph nodes were ranged from l.3/1.5 and 1.1/1.2 respectively. The frequency of FDG + in hypopharyngeal cancers is 1.0,in laryngeal cancers is 1.0 and in tongue base cancers is 1.0. The frequency of HL91+/+/- in hypopharyngeal cancers is 0..58,in laryngeal cancers is 0.25.and in tongue base cancers is 0. The overall detection rate of head and neck cancer by FDG+ in this study is 100% and overall detection rate of local-regional hypoxia, by

14 CFR 91.321 - Carriage of candidates in elections.

Science.gov (United States)

2010-01-01

... carrier or commercial operator; (2) You carry the candidate, agent, or person traveling on behalf of a... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Carriage of candidates in elections. 91.321 Section 91.321 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION...

25 CFR 91.13 - Health, sanitation, and sewerage disposal.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Health, sanitation, and sewerage disposal. 91.13 Section... INDIAN VILLAGES, OSAGE RESERVATION, OKLAHOMA § 91.13 Health, sanitation, and sewerage disposal. Health, sanitation, and sewerage disposal problems within the village reserves shall be subject to and controlled by...

24 CFR 91.225 - Certifications.

Science.gov (United States)

2010-04-01

... provided family violence prevention or treatment services under any project assisted under the ESG program, including protection against the release of the address or location of any family violence shelter project... be included in the annual submission to HUD. (See definition of “certification” in § 91.5.) (1...

Microstructure and properties of the heat-resistant chromium steel P91; Gefuege und Eigenschaften des warmfesten Chromstahls P91

Energy Technology Data Exchange (ETDEWEB)

Kohlar, Stefanie

2017-07-01

The heat-resistant chromium steel X10CrMoVNb9-1 specified as P91 is based on its good properties at high temperatures and high mechanical Stresses as a potential material for use as reactor pressure vessel material in fourth generation nuclear reactors. Subject of this work was the characterization of the microstructure and mechanical properties of this material. For this purpose it was metallographically examined and technically important characteristic values were determined. Different etching methods and imaging techniques were used, with the method of oxalic acid etching newly applied to this material providing meaningful results. Tensile tests, hardness tests and notched bar impact tests provided mechanical-technological characteristics. The fracture mechanical behavior was determined by means of fracture mechanics tests on bending and compact tensile tests. The main focus was on the investigation of the applicability of the evaluation methods described in standards ASTM 1921 and ASTM 1820 for low alloy steels. The investigations showed that the P91 is expected to have a homogeneous martensitic structure consisting of annealed martensite with embedded carbides and carbonitrides. The location and size of the found carbides could be represented by the process of oxalic acid etching newly applied to this material. The mechanical-technological tests showed a good strength and toughness behavior typical for tempered steel. The application of the linear-elastic fracture mechanics and the yielding fracture mechanics made it possible to determine a reference temperature according to ASTM 1921-08a, but also showed that the evaluation methods and geometries described for this high-alloy steel in ASTM 1820-08 do not lead to valid material characteristics. In order to determine the suitability of this material for nuclear applications, the irradiation and creep behavior of the P91 should be characterized more precisely in further investigations. [German] Der als P91

Responding to a cVDPV1 outbreak in Ukraine: Implications, challenges and opportunities.

Science.gov (United States)

Khetsuriani, Nino; Perehinets, Ihor; Nitzan, Dorit; Popovic, Dragoslav; Moran, Thomas; Allahverdiyeva, Vusala; Huseynov, Shahin; Gavrilin, Eugene; Slobodianyk, Liudmyla; Izhyk, Olha; Sukhodolska, Anna; Hegazi, Sahar; Bulavinova, Katerina; Platov, Sergei; O'Connor, Patrick

2017-08-24

The European Region, certified polio-free in 2002, remains at risk of wild poliovirus reintroduction and emergence of circulating vaccine-derived polioviruses (cVDPV) until global polio eradication is achieved, as demonstrated by the cVDPV1 outbreak in Ukraine in 2015. We reviewed epidemiologic, clinical and virology data on cVDPV cases, surveillance and immunization coverage data, and reports of outbreak-related surveys, country missions, and expert group meetings. In Ukraine, 3-dose polio vaccine coverage declined from 91% in 2008 to 15% by mid-2015. In summer, 2015, two unrelated children from Zakarpattya province were paralyzed by a highly divergent cVDPV1. The isolates were 20 and 26 nucleotide divergent from prototype Sabin strain (with 18 identical mutations) consistent with their common origin and ∼2-year evolution. Outbreak response recommendations developed with international partner support included conducting three nationwide supplementary immunization activities (SIAs) with tOPV, strengthening surveillance and implementing communication interventions. SIAs were conducted during October 2015-February 2016 (officially reported coverage, round 1-64.4%, round 2-71.7%, and round 3-80.7%). Substantial challenges to outbreak response included lack of high-level support, resistance to OPV use, low perceived risk of polio, widespread vaccine hesitancy, anti-vaccine media environment, economic crisis and military conflict. Communication activities improved caregiver awareness of polio and confidence in vaccination. Surveillance was enhanced but did not consistently meet applicable performance standards. Post-outbreak assessments concluded that cVDPV1 transmission in Ukraine has likely stopped following the response, but significant gaps in population immunity and surveillance remained. Chronic under-vaccination in Ukraine resulted in the accumulation of children susceptible to polioviruses and created favorable conditions for VDPV1 emergence and circulation

Sealing of PEO Coated AZ91 Magnesium Alloy Using La-Based Solutions

Directory of Open Access Journals (Sweden)

Luca Pezzato

2017-01-01

Full Text Available In this work, solutions containing lanthanum salts were used for a post-treatment of sealing to increase the corrosion resistance of PEO coated AZ91 alloy. PEO coatings were produced on samples of AZ91 magnesium alloy using an alkaline solution containing sodium hydroxide, sodium phosphates, and sodium silicates. The sealing treatment was performed in a solution containing 12 g/L of La(NO33 at pH 4 at different temperatures and for different treatment times. Potentiodynamic polarization test, an EIS test, showed that the sealing treatment with solution containing lanthanum nitrate caused a remarkable increase in the corrosion resistance. The corrosion behavior was correlated with the surface morphology and elemental composition evaluated with scanning electron microscope (SEM, X-ray diffraction (XRD, and X-ray photoelectron spectroscopy (XPS. In particular, the sealing treatment at 50°C for 30 min resulted in being the most promising to increase the corrosion properties of PEO treated samples because of the formation of a homogeneous sealing layer, mainly composed of La(OH3.

25 CFR 91.7 - Permits to occupy land for dwelling purposes.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Permits to occupy land for dwelling purposes. 91.7... INDIAN VILLAGES, OSAGE RESERVATION, OKLAHOMA § 91.7 Permits to occupy land for dwelling purposes. The issuance of permits for the use of land for dwelling purposes within any village reserve described in § 91...

25 CFR 91.12 - Business enterprises and public buildings.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Business enterprises and public buildings. 91.12 Section... INDIAN VILLAGES, OSAGE RESERVATION, OKLAHOMA § 91.12 Business enterprises and public buildings. No... buildings shall be erected on lands within the boundaries of a village reserve except on tracts described in...

Metabolic versatility and antibacterial metabolite biosynthesis are distinguishing genomic features of the fire blight antagonist Pantoea vagans C9-1.

Directory of Open Access Journals (Sweden)

Theo H M Smits

Full Text Available BACKGROUND: Pantoea vagans is a commercialized biological control agent used against the pome fruit bacterial disease fire blight, caused by Erwinia amylovora. Compared to other biocontrol agents, relatively little is currently known regarding Pantoea genetics. Better understanding of antagonist mechanisms of action and ecological fitness is critical to improving efficacy. PRINCIPAL FINDINGS: Genome analysis indicated two major factors Contribute to biocontrol activity: competition for limiting substrates and antibacterial metabolite production. Pathways for utilization of a broad diversity of sugars and acquisition of iron were identified. Metabolism of sorbitol by P. vagans C9-1 may be a major metabolic feature in biocontrol of fire blight. Biosynthetic genes for the antibacterial peptide pantocin A were found on a chromosomal 28-kb genomic island, and for dapdiamide E on the plasmid pPag2. There was no evidence of potential virulence factors that could enable an animal or phytopathogenic lifestyle and no indication of any genetic-based biosafety risk in the antagonist. CONCLUSIONS: Identifying key determinants contributing to disease suppression allows the development of procedures to follow their expression in planta and the genome sequence contributes to rationale risk assessment regarding the use of the biocontrol strain in agricultural systems.

Radiation protection research and training programme 1990-91 Catalogue of contracts

International Nuclear Information System (INIS)

1991-01-01

This catalogue contains summaries of contacts included in the 1990-91 radiation protection research and training programme, which is divided into three sectors: (a) human exposure to radiation and radioactivity: (i) measurement of radiation dose and its interpretation, (ii) transfer and behaviour of radionuclides in the environment; (b) consequences of radiation exposure to man; their assessment, prevention and treatment: (i) stochastic effects of radiation, (ii) non-stochastic effects of radiation, (iii) radiation effects on the developing organism; (c) risks and management of radiation exposure: (i) assessment of human exposure and risks, (ii) optimization and management of radiation protection

10 CFR 455.91 - Eligibility.

Science.gov (United States)

2010-01-01

... Marketing § 455.91 Eligibility. To be eligible to receive financial assistance for technical assistance, program assistance, and marketing, a State must: (a) Have in place a State Plan approved by DOE which... assistance, and marketing, pursuant to § 455.20(j)(1); (b) Have established a program consistent with this...

Microstructure evolution of ASTM 335 P91 steel, subjected to continuous cooling

International Nuclear Information System (INIS)

Carrizo, D.A; Danon, C.A; Ramos, C.P

2012-01-01

This paper studies the influence of the cooling rate on an isothermal phase transformations in ASTM A335 P91 steel, by the analysis of the resulting microstructure after several continuous cooling cycles under fixed austenization conditions. The CCT (Continuous Cooling Transformation) diagram of this material has already been reported in the literature, so the main phase fields are known, and they depend on the austenitic grain size and the cooling rate. Five samples were tested in a dilatometer, they were austenized and then cooled at different rates between 50 o C/h and 300 o C/h. The identification and characterization of the resulting phases was carried out by using Scanning Electron Microscopy, X-ray Diffraction and Mossbauer Spectroscopy. The obtained results allowed to add information about the presence of retained austenite and (Fe,Cr) 3 C - type carbides to the CCT diagram of the material (author)

Toxicity of inhaled 91YCl3 in Beagle dogs. XII

International Nuclear Information System (INIS)

Muggenburg, B.A.; Rebar, A.H.; Boecker, B.B.; Jones, R.K.; McClellan, R.O.; Pickrell, J.A.

1978-01-01

Studies on the metabolism, dosimetry and effects of inhaled 91 YCl 3 in Beagle dogs are being continued to provide information that will aid in assessing the biological consequences of nuclear accidents in which 91 Y or other radionuclides that produce a similar radiation dose pattern may be released. Forty-two dogs with 91 Y initial body burdens from 64 to 1300 μCi/kg body weight was placed in four groups with mean lung burdens of 310, 180, 75 and 40 μCi/kg body weight. These dogs and 12 control dogs are being maintained for lifetime observation. An additional group of four dogs with a mean initial 91 Y body burden of 180 μCi/kg body weight was placed in a sacrifice study. Twenty-six of the exposed dogs and four of the control dogs have died. Eleven dogs within the highest activity level groups died or were euthanized at 12 to 33 days after inhalation of 91 Y with changes related to severe bone marrow damage and associated pancytopenia. Two dogs died approximately one year after 91 Y inhalation with convulsive seizures that were presumed to be unrelated to the 91 Y exposure. Nine 91 Y-exposed dogs died or were euthanized due to neoplasms 2012 to 4115 days after exposure. Three dogs had nasal squamous cell carcinomas, one had a bronchioloalveolar carcinoma, one a mast cell sarcoma, one a mammary adenocarcinoma, one a malignant lymphoma, one a melanosarcoma in the mouth and one heart base tumor. Two dogs died of renal failure 2663 and 4086 days after exposure. One dog died with autoimmune hemolytic anemia 3888 days after exposure and one died with congestive heart failure 4042 days after inhalation exposure. One control dog died of empyema, another control dog died with a mammary adenocarcinoma, one died with congestive heart failure and one with malabsorption syndrome. Serial observations are continuing on all surviving dogs

14 CFR 91.1507 - Fuel tank system inspection program.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Fuel tank system inspection program. 91... Airworthiness and Safety Improvements § 91.1507 Fuel tank system inspection program. (a) Except as provided in... fuel tank is installed under a field approval, before June 16, 2008, the operator must submit to the...

Effect of welding on creep damage evolution in P91B steel

Energy Technology Data Exchange (ETDEWEB)

Baral, J., E-mail: jayshree2k4@gmail.com [Metallurgical and Materials Engineering, Indian Institute of Kharagpur, WB 721302 (India); Swaminathan, J. [CSIR–National Metallurgical Laboratory, Jamshedpur 831007 (India); Chakrabarti, D.; Ghosh, R.N. [Metallurgical and Materials Engineering, Indian Institute of Kharagpur, WB 721302 (India)

2017-07-15

Study of creep behavior of base metal (without weld) and welded specimens of P91B steel over a range of temperatures (600–650 °C) and stresses (50–180 MPa) showed similar values of minimum creep-rates for both specimens at higher stress regime (>100 MPa) whilst, significantly higher creep rates in the case of welded specimens at lower stress regime. Considering that welded specimen is comprised of two distinct structural regimes, i.e. weld affected zone and base metal, a method has been proposed for estimating the material parameters describing creep behavior of those regimes. Stress–strain distribution across welded specimen predicted from finite element analysis based on material parameters revealed preferential accumulation of stress and creep strain at the interface between weld zone and base metal. This is in-line with the experimental finding that creep rupture preferentially occurs at inter-critical heat affected zone in welded specimens owing to ferrite-martensite structure with coarse Cr{sub 23}C{sub 6} particles. - Highlights: •Comparison of creep properties of welded and virgin specimens of P91B steel. •At lower stresses (<100 MPa) welded samples show higher minimum creep-rate. •Creep rupture at inter-critical heat affected zone (IC-HAZ) in welded specimens. •FEA showing accumulation of creep strain in weld/base metal interface. •Precipitate free soft ferrite matrix accumulates strain and weakens IC-HAZ.

Linkage of the Nit1C gene cluster to bacterial cyanide assimilation as a nitrogen source.

Science.gov (United States)

Jones, Lauren B; Ghosh, Pallab; Lee, Jung-Hyun; Chou, Chia-Ni; Kunz, Daniel A

2018-05-21

A genetic linkage between a conserved gene cluster (Nit1C) and the ability of bacteria to utilize cyanide as the sole nitrogen source was demonstrated for nine different bacterial species. These included three strains whose cyanide nutritional ability has formerly been documented (Pseudomonas fluorescens Pf11764, Pseudomonas putida BCN3 and Klebsiella pneumoniae BCN33), and six not previously known to have this ability [Burkholderia (Paraburkholderia) xenovorans LB400, Paraburkholderia phymatum STM815, Paraburkholderia phytofirmans PsJN, Cupriavidus (Ralstonia) eutropha H16, Gluconoacetobacter diazotrophicus PA1 5 and Methylobacterium extorquens AM1]. For all bacteria, growth on or exposure to cyanide led to the induction of the canonical nitrilase (NitC) linked to the gene cluster, and in the case of Pf11764 in particular, transcript levels of cluster genes (nitBCDEFGH) were raised, and a nitC knock-out mutant failed to grow. Further studies demonstrated that the highly conserved nitB gene product was also significantly elevated. Collectively, these findings provide strong evidence for a genetic linkage between Nit1C and bacterial growth on cyanide, supporting use of the term cyanotrophy in describing what may represent a new nutritional paradigm in microbiology. A broader search of Nit1C genes in presently available genomes revealed its presence in 270 different bacteria, all contained within the domain Bacteria, including Gram-positive Firmicutes and Actinobacteria, and Gram-negative Proteobacteria and Cyanobacteria. Absence of the cluster in the Archaea is congruent with events that may have led to the inception of Nit1C occurring coincidentally with the first appearance of cyanogenic species on Earth, dating back 400-500 million years.

AFSC/REFM: Amendment 91 Chinook Salmon Economic Data Report Dataset

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Annual series of economic data collected for years 2012 and forward for the Amendment 91 (A91) Chinook Salmon Economic Data Report (EDR). Reporting is required of...

SO(9,1) invariant matrix formulation of a supermembrane

International Nuclear Information System (INIS)

Fujikawa, K.; Okuyama, K.

1998-01-01

An SO(9,1) invariant formulation of an 11-dimensional supermembrane is presented by combining an SO(10,1) invariant treatment of reparametrization symmetry with an SO(9,1) invariant θ R = 0 gauge of κ-symmetry. The Lagrangian thus defined consists of polynomials in dynamical variables (up to quartic terms in X μ and up to the eighth power in θ), and reparametrization BRST symmetry is manifest. The area preserving diffeomorphism is consistently incorporated and the area preserving gauge symmetry is made explicit. The SO(9,1) invariant theory contains terms which cannot be induced by a naive dimensional reduction of higher-dimensional supersymmetric Yang-Mills theory. The SO(9,1) invariant Hamiltonian and the generator of area preserving diffeomorphism together with the supercharge are matrix regularized by applying the standard procedure. As an application of the present formulation, we evaluate the possible central charges in superalgebra both in the path integral and in the canonical (Dirac) formalism, and we find only the two-form charge [ X μ , X ν ]. (orig.)

32 CFR Appendix C to Part 623 - Agreement for Loan of US Army Materiel (DA Form 4881-R)

Science.gov (United States)

2010-07-01

... 32 National Defense 3 2010-07-01 2010-07-01 true Agreement for Loan of US Army Materiel (DA Form 4881-R) C Appendix C to Part 623 National Defense Department of Defense (Continued) DEPARTMENT OF THE... Loan of US Army Materiel (DA Form 4881-R) EC24OC91.013 EC24OC91.014 EC24OC91.015 EC24OC91.016 EC24OC91...

Electrochemical corrosion behavior of AZ91D alloy in ethylene glycol

Energy Technology Data Exchange (ETDEWEB)

Fekry, A.M. [Chemistry Department, Faculty of Science, Cairo University, Giza 12613 (Egypt)], E-mail: hham4@hotmail.com; Fatayerji, M.Z. [Chemistry Department, Faculty of Science, Cairo University, Giza 12613 (Egypt)

2009-11-01

The effect of concentration on the corrosion behavior of Mg-based alloy AZ91D was investigated in ethylene glycol-water solutions using electrochemical techniques i.e. potentiodynamic polarization, electrochemical impedance measurements (EIS) and surface examination via scanning electron microscope (SEM) technique. This can provide a basis for developing new coolants for magnesium alloy engine blocks. Corrosion behavior of AZ91D alloy by coolant is important in the automotive industry. It was found that the corrosion rate of AZ91D alloy decreased with increasing concentration of ethylene glycol. For AZ91D alloy in chloride >0.05 M or fluoride <0.05 M containing 30% ethylene glycol solution, they are more corrosive than the blank (30% ethylene glycol-70% water). However, at concentrations <0.05 for chloride or >0.05 M for fluoride containing ethylene glycol solution, some inhibition effect has been observed. The corrosion of AZ91D alloy in the blank can be effectively inhibited by addition of 0.05 mM paracetamol that reacts with AZ91D alloy and forms a protective film on the surface at this concentration as confirmed by surface examination.

27 CFR 6.91 - Samples.

Science.gov (United States)

2010-04-01

... TREASURY LIQUORS âTIED-HOUSEâ Exceptions § 6.91 Samples. The act by an industry member of furnishing or giving a sample of distilled spirits, wine, or malt beverages to a retailer who has not purchased the brand from that industry member within the last 12 months does not constitute a means to induce within...

Influence of microstructural development during annealing at 780oC on creep resistance of ferritic-martensitic T91 (9%Cr-1%Mo-V-Nb) steel

International Nuclear Information System (INIS)

De Cicco, H; Zavaleta Gutierrez, N; Marrero, J; Luppo, M.I; Danon, C.A

2006-01-01

Due to its good properties of creep resistance, toughness and rust resistance, martensitic-ferritic 9%Cr-1%Mo steels are widely used for the production of heating plant components, boilers, heat exchangers, piping and tubing, etc. The effectiveness in steels of MX carbonitrides such as (Nb,V) (C,N) on improving creep resistance at high temperatures is well known. Controlling the behavior of the MX phases to precipitation, during annealing, is essential for obtaining a stable microstructure that can resist high temperatures. This study investigates the relationship between creep resistance and the microstructural changes that occur at different annealing times at a temperature of 780 o C -used industrially during the production and post-welding- in T91 steel. Creep trials were carried out at 600 o C and 190 MPa, and the samples were characterized using optic microscopy (OM), inductively coupled plasma-atomic emission spectrometry (ICP-AES) and transmission electron microscopy (TEM), the latter including a facility for energy dispersive spectroscopy (EDS). Based on its morphological characteristics, the MX precipitates are classified into three types, types I, II and III. Tempering time at 780 o C has been found to be one of the factors that determines which MX is dominant in the annealed steel. The presence of type MX-III, formed by the secondary precipitation of a VN particle adhering to a NbX, commonly called 'wing', seems to favor creep resistance in these steels. This type of of precipitate, then, fills an effective role in the anchoring of dislocations during creep (cw)

14 CFR 91.1089 - Qualifications: Check pilots (aircraft) and check pilots (simulator).

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Qualifications: Check pilots (aircraft) and check pilots (simulator). 91.1089 Section 91.1089 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION... RULES Fractional Ownership Operations Program Management § 91.1089 Qualifications: Check pilots...

China's energy system transformation towards the 2 °C goal: Implications of different effort-sharing principles

International Nuclear Information System (INIS)

Xunzhang, Pan; Wenying, Chen; Clarke, Leon E.; Lining, Wang; Guannan, Liu

2017-01-01

In coping with climate change, China's CO_2 mitigation targets should keep in step with the achievement of the long-term goal of holding temperature increase to well below 2 °C above pre-industrial levels by the end of this century (this is referred to as the 2 °C goal). Many previous papers have highlighted the implications of different effort-sharing principles and schemes in determining national contributions to global mitigations. In this paper, China's energy transformation towards the 2 °C goal until 2100 is examined in an integrated-assessment model in light of different effort-sharing principles to understand how the application of such schemes may alter China's energy system transformation on a pathway to this long-term goal. Across scenarios, China's non-fossil energy will account for 50–70% and 85% of primary energy consumption in 2050 and 2100, respectively in the scenarios in this study. Fossil energy with carbon capture and storage technologies and non-fossil energy will dominate power generation in China over the long run. Coal will be phased out in end-use sectors and electricity use will expand regardless of the effort-sharing principles. The sensitivity analysis of long-term steady-state levels implies that the ultimate level that emissions could reach will have great influences on the energy system transformation in China. - Highlights: • China's energy transformation towards the 2 °C goal until 2100 are examined in a bottom-up model. • The implications of effort-sharing principles on China's mitigations beyond 2030 are analyzed. • The achievement of China's INDC is incorporated in the discussion. • The sensitivity analysis of long-term emissions levels is discussed. • Non-fossil energy would account for 50–70% and 85% of primary energy consumption in 2050 and 2100.

Stabilization of global temperature at 1.5°C and 2.0°C: implications for coastal areas.

Science.gov (United States)

Nicholls, Robert J; Brown, Sally; Goodwin, Philip; Wahl, Thomas; Lowe, Jason; Solan, Martin; Godbold, Jasmin A; Haigh, Ivan D; Lincke, Daniel; Hinkel, Jochen; Wolff, Claudia; Merkens, Jan-Ludolf

2018-05-13

The effectiveness of stringent climate stabilization scenarios for coastal areas in terms of reduction of impacts/adaptation needs and wider policy implications has received little attention. Here we use the Warming Acidification and Sea Level Projector Earth systems model to calculate large ensembles of global sea-level rise (SLR) and ocean pH projections to 2300 for 1.5°C and 2.0°C stabilization scenarios, and a reference unmitigated RCP8.5 scenario. The potential consequences of these projections are then considered for global coastal flooding, small islands, deltas, coastal cities and coastal ecology. Under both stabilization scenarios, global mean ocean pH (and temperature) stabilize within a century. This implies significant ecosystem impacts are avoided, but detailed quantification is lacking, reflecting scientific uncertainty. By contrast, SLR is only slowed and continues to 2300 (and beyond). Hence, while coastal impacts due to SLR are reduced significantly by climate stabilization, especially after 2100, potential impacts continue to grow for centuries. SLR in 2300 under both stabilization scenarios exceeds unmitigated SLR in 2100. Therefore, adaptation remains essential in densely populated and economically important coastal areas under climate stabilization. Given the multiple adaptation steps that this will require, an adaptation pathways approach has merits for coastal areas.This article is part of the theme issue 'The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'. © 2018 The Authors.

Stabilization of global temperature at 1.5°C and 2.0°C: implications for coastal areas

Science.gov (United States)

Nicholls, Robert J.; Brown, Sally; Goodwin, Philip; Wahl, Thomas; Lowe, Jason; Solan, Martin; Godbold, Jasmin A.; Haigh, Ivan D.; Lincke, Daniel; Hinkel, Jochen; Wolff, Claudia; Merkens, Jan-Ludolf

2018-05-01

The effectiveness of stringent climate stabilization scenarios for coastal areas in terms of reduction of impacts/adaptation needs and wider policy implications has received little attention. Here we use the Warming Acidification and Sea Level Projector Earth systems model to calculate large ensembles of global sea-level rise (SLR) and ocean pH projections to 2300 for 1.5°C and 2.0°C stabilization scenarios, and a reference unmitigated RCP8.5 scenario. The potential consequences of these projections are then considered for global coastal flooding, small islands, deltas, coastal cities and coastal ecology. Under both stabilization scenarios, global mean ocean pH (and temperature) stabilize within a century. This implies significant ecosystem impacts are avoided, but detailed quantification is lacking, reflecting scientific uncertainty. By contrast, SLR is only slowed and continues to 2300 (and beyond). Hence, while coastal impacts due to SLR are reduced significantly by climate stabilization, especially after 2100, potential impacts continue to grow for centuries. SLR in 2300 under both stabilization scenarios exceeds unmitigated SLR in 2100. Therefore, adaptation remains essential in densely populated and economically important coastal areas under climate stabilization. Given the multiple adaptation steps that this will require, an adaptation pathways approach has merits for coastal areas. This article is part of the theme issue `The Paris Agreement: understanding the physical and social challenges for a warming world of 1.5°C above pre-industrial levels'.

Corrosion fatigue behaviors of two biomedical Mg alloys - AZ91D and WE43 - In simulated body fluid.

Science.gov (United States)

Gu, X N; Zhou, W R; Zheng, Y F; Cheng, Y; Wei, S C; Zhong, S P; Xi, T F; Chen, L J

2010-12-01

Magnesium alloys have been recently developed as biodegradable implant materials, yet there has been no study concerning their corrosion fatigue properties under cyclic loading. In this study the die-cast AZ91D (A for aluminum 9%, Z for zinc 1% and D for a fourth phase) and extruded WE43 (W for yttrium 4%, E for rare earth mischmetal 3%) alloys were chosen to evaluate their fatigue and corrosion fatigue behaviors in simulated body fluid (SBF). The die-cast AZ91D alloy indicated a fatigue limit of 50MPa at 10⁷ cycles in air compared to 20MPa at 10⁶ cycles tested in SBF at 37°C. A fatigue limit of 110MPa at 10⁷ cycles in air was observed for extruded WE43 alloy compared to 40MPa at 10⁷ cycles tested in SBF at 37°C. The fatigue cracks initiated from the micropores when tested in air and from corrosion pits when tested in SBF, respectively. The overload zone of the extruded WE43 alloy exhibited a ductile fracture mode with deep dimples, in comparison to a brittle fracture mode for the die-cast AZ91D. The corrosion rate of the two experimental alloys increased under cyclic loading compared to that in the static immersion test. Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

7 CFR 955.91 - Additional parties.

Science.gov (United States)

2010-01-01

... Marketing Agreement § 955.91 Additional parties. After the effective date thereof, any handler may become a... Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing Agreements... then be effective as to such new contracting party. ...

Dicty_cDB: SHF674 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available ne UCRCS08-28E10-J20-1-4.g, mRNA sequence. 46 0.96 1 CX072512 |CX072512.1 UCRCS08_28E10_b Parent Washington ...2513.1 UCRCS08_28E10_g Parent Washington Navel Orange Callus cDNA Library UCRCS08-2 Citrus sinensis cDNA clo...e RP86-222L20, WORKING DRAFT SEQUENCE, 2 ordered pieces. 38 0.91 3 CX072513 |CX07

RNAi validation of resistance genes and their interactions in the highly DDT-resistant 91-R strain of Drosophila melanogaster.

Science.gov (United States)

Gellatly, Kyle J; Yoon, Kyong Sup; Doherty, Jeffery J; Sun, Weilin; Pittendrigh, Barry R; Clark, J Marshall

2015-06-01

4,4'-dichlorodiphenyltrichloroethane (DDT) has been re-recommended by the World Health Organization for malaria mosquito control. Previous DDT use has resulted in resistance, and with continued use resistance will increase in terms of level and extent. Drosophila melanogaster is a model dipteran that has many available genetic tools, numerous studies done on insecticide resistance mechanisms, and is related to malaria mosquitoes allowing for extrapolation. The 91-R strain of D. melanogaster is highly resistant to DDT (>1500-fold), however, there is no mechanistic scheme that accounts for this level of resistance. Recently, reduced penetration, increased detoxification, and direct excretion have been identified as resistance mechanisms in the 91-R strain. Their interactions, however, remain unclear. Use of UAS-RNAi transgenic lines of D. melanogaster allowed for the targeted knockdown of genes putatively involved in DDT resistance and has validated the role of several cuticular proteins (Cyp4g1 and Lcp1), cytochrome P450 monooxygenases (Cyp6g1 and Cyp12d1), and ATP binding cassette transporters (Mdr50, Mdr65, and Mrp1) involved in DDT resistance. Further, increased sensitivity to DDT in the 91-R strain after intra-abdominal dsRNA injection for Mdr50, Mdr65, and Mrp1 was determined by a DDT contact bioassay, directly implicating these genes in DDT efflux and resistance. Copyright © 2015 Elsevier Inc. All rights reserved.

Low temperature friction stir welding of P91 steel

Directory of Open Access Journals (Sweden)

Prasad Rao Kalvala

2016-08-01

Full Text Available Bead-on-plate friction stir welds were made on P91 alloy with low and high rotational speeds (100 and 1000 RPM to study their effects on weld microstructural changes and impression creep behavior. Temperatures experienced by the stir zone were recorded at the weld tool tip. Different zones of welds were characterized for their microstructural changes, hardness and creep behavior (by impression creep tests. The results were compared with submerged arc fusion weld. Studies revealed that the stir zone temperature with 100 RPM was well below Ac1 temperature of P91 steel while it was above Ac3 with 1000 RPM. The results suggest that the microstructural degradation in P91 welds can be controlled by low temperature friction stir welding technique.

African mining '91

International Nuclear Information System (INIS)

1991-01-01

The second 'African Mining' conference was held in June 1991, and followed the first event held in May 1987. That full four-year period was characterized by substantial changes in the political and economic climate of many countries in both hemispheres. The results of many of these changing facets of our industry are described in the papers in African Mining'91. Many of the papers deal with advances in technology, which is the main reason for the meeting. There are 37 papers under the headings general, mining, metallurgy and geology and exploration. Most papers are concerned with gold, copper and mineral mining. One paper concerning uranium mining operations in Namibia is indexed separately. (author)

Or CAD 9.1

International Nuclear Information System (INIS)

Lee, Seung Mu

2000-02-01

This book gives descriptions of Or CAD 9.1 with before drawing plan such as gaining Or CAD Demo CD, capture tools, making new design file, drawing structure, and setting design template, Drawings like making new drawing, finding parts, drawing lines, connecting line among the pages, and connecting parts using drawing structure, unstable multivibrator circle such as management of design file, power and ground connection, utility, beginning layout, single drawing, flat drawing, latch circuit, making a library, making a footprint, smart route and flash window.

Evaluation of the creep cavitation behavior in Grade 91 steels

International Nuclear Information System (INIS)

Siefert, J.A.; Parker, J.D.

2016-01-01

Even in properly processed Grade 91 steel, the long term performance and creep rupture strength of base metal is below that predicted from a simple extrapolation of short term data. One of the mechanisms responsible for this reduction in strength is the development of creep voids. Importantly, nucleation, growth and inter linkage of voids under long term creep conditions also results in a significant loss of creep ductility. Thus, elongations to rupture of around 5% in 100,000 h are now considered normal for creep tests on many tempered martensitic steels. Similarly, creep damage development in the heat affected zones of welds results in low ductility cracking at times below the minimum expected life of base metal. In all cases, the relatively brittle behavior is directly a consequence of creep void development. Indeed, the results of component root cause analysis have shown that crack development in Grade 91 steel in-service components is also a result of the formation of creep voids. The present paper examines background on the nucleation and development of creep voids in 9%Cr type martensitic steels, presents information regarding methods which allow proper characterization of the creep voids and discusses factors affecting creep fracture behavior in tempered martensitic steels. It is apparent that the maximum zone of cavitation observed in Grade 91 steel welds occurred in a region in the heat affected zone which is ∼750 μm in width. This region corresponds to the band where the peak temperature during welding is in the range of ∼1150–920 °C.The cavity density in this band was over about 700 voids/mm"2 at an estimated creep life fraction of ∼99%. - Highlights: • The present paper examines background on the nucleation and development of creep voids in 9%Cr type martensitic steels. • Information regarding methods which allow proper characterization of the creep voids is also presented. • Factors affecting creep fracture behavior in tempered

46 CFR 91.40-1 - Definitions relating to hull examinations.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Definitions relating to hull examinations. 91.40-1... VESSELS INSPECTION AND CERTIFICATION Drydocking § 91.40-1 Definitions relating to hull examinations. As...-hull fittings. (b) Internal structural examination means an examination of the vessel while afloat or...

46 CFR 91.60-5 - Cargo Ship Safety Construction Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo Ship Safety Construction Certificate. 91.60-5... VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 91.60-5 Cargo Ship Safety Construction Certificate. (a) All vessels on an international voyage...

40 CFR 91.4 - Acronyms and abbreviations.

Science.gov (United States)

2010-07-01

....—United States Code VOC—Volatile organic compounds ZROD—zirconium dioxide sensor ...) CONTROL OF EMISSIONS FROM MARINE SPARK-IGNITION ENGINES General § 91.4 Acronyms and abbreviations. The...

City centres in the internet age : Exploring the implications of b2c e-commerce for retailing at city centres in the Netherlands

NARCIS (Netherlands)

Weltevreden, J.W.J.

2006-01-01

The rapid development of Internet use and b2c e-commerce led to many speculations about the impacts of ICT on society. In the Netherlands, there is a growing concern about the implications of b2c e-commerce for city centre retailing. Therefore, this dissertation has empirically investigated the

Growth, survival, and peptidolytic activity of Lactobacillus plantarum I91 in a hard-cheese model.

Science.gov (United States)

Bergamini, C V; Peralta, G H; Milesi, M M; Hynes, E R

2013-09-01

In this work, we studied the growth, survival, and peptidolytic activity of Lactobacillus plantarum I91 in a hard-cheese model consisting of a sterile extract of Reggianito cheese. To assess the influence of the primary starter and initial proteolysis level on these parameters, we prepared the extracts with cheeses that were produced using 2 different starter strains of Lactobacillus helveticus 138 or 209 (Lh138 or Lh209) at 3 ripening times: 3, 90, and 180 d. The experimental extracts were inoculated with Lb. plantarum I91; the control extracts were not inoculated and the blank extracts were heat-treated to inactivate enzymes and were not inoculated. All extracts were incubated at 34°C for 21 d, and then the pH, microbiological counts, and proteolysis profiles were determined. The basal proteolysis profiles in the extracts of young cheeses made with either strain tested were similar, but many differences between the proteolysis profiles of the extracts of the Lh138 and Lh209 cheeses were found when riper cheeses were used. The pH values in the blank and control extracts did not change, and no microbial growth was detected. In contrast, the pH value in experimental extracts decreased, and this decrease was more pronounced in extracts obtained from either of the young cheeses and from the Lh209 cheese at any stage of ripening. Lactobacillus plantarum I91 grew up to 8 log during the first days of incubation in all of the extracts, but then the number of viable cells decreased, the extent of which depended on the starter strain and the age of the cheese used for the extract. The decrease in the counts of Lb. plantarum I91 was observed mainly in the extracts in which the pH had diminished the most. In addition, the extracts that best supported the viability of Lb. plantarum I91 during incubation had the highest free amino acids content. The effect of Lb. plantarum I91 on the proteolysis profile of the extracts was marginal. Significant changes in the content of free

Metabolism of 7-ethoxycoumarin, flavanone and steroids by cytochrome P450 2C9 variants.

Science.gov (United States)

Uno, Tomohide; Nakano, Ryosuke; Kanamaru, Kengo; Takenaka, Shinji; Uno, Yuichi; Imaishi, Hiromasa

2017-11-01

CYP2C9 is a human microsomal cytochrome P450c (CYP). Much of the variation in CYP2C9 levels and activity can be attributed to polymorphisms of this gene. Wild-type CYP2C9 and mutants were coexpressed with NADPH-cytochrome P450 reductase in Escherichia coli. The hydroxylase activities toward 7-ethoxycoumarin, flavanone and steroids were examined. Six CYP2C9 variants showed Soret peaks (450 nm) typical of P450 in reduced CO-difference spectra. CYP2C9.38 had the highest 7-ethoxycoumarin de-ethylase activity. All the CYP2C9 variants showed lower flavanone 6-hydroxylation activities than CYP2C9.1 (the wild-type). CYP2C9.38 showed higher activities in testosterone 6β-hydroxylation, progesterone 6β-/16α-hydroxylation, estrone 11α-hydroxylation and estradiol 6α-hydroxylation than CYP2C9.1. CYP2C9.40 showed higher testosterone 17-oxidase activity than CYP2C9.1; CYP2C9.8 showed higher estrone 16α-hydroxylase activity and CYP2C9.12 showed higher estrone 11α-hydroxylase activity. CYP2C9.9 and CYP2C9.10 showed similar activities to CYP2C9.1. These results indicate that the substrate specificity of CYP2C9.9 and CYP2C9.10 was not changed, but CYP2C9.8, CYP2C9.12 and CYP2C9.40 showed different substrate specificity toward steroids compared with CYP2C9.1; and especially CYP2C9.38 displayed diverse substrate specificities towards 7-ethoxycoumarin and steroids. Copyright © 2017 John Wiley & Sons, Ltd.

46 CFR 91.60-10 - Cargo Ship Safety Equipment Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Cargo Ship Safety Equipment Certificate. 91.60-10... VESSELS INSPECTION AND CERTIFICATION Certificates Under International Convention for Safety of Life at Sea, 1974 § 91.60-10 Cargo Ship Safety Equipment Certificate. (a) All vessels on an international voyage are...

Performance of different metrics proposed to CIE TC 1-91

NARCIS (Netherlands)

Bhusal, P.; Dangol, R.

2017-01-01

The main aim of the article is to find out the performance of different metrics proposed to CIE TC 1-91. Currently, six different indexes have been proposed to CIE TC 1-91: Colour Quality Scale (CQS), Feeling of Contrast Index (FCI), Memory colour rendering index (MCRI), Preference of skin (PS),

Influence of C3H8O3 in the electrolyte on characteristics and corrosion resistance of the microarc oxidation coatings formed on AZ91D magnesium alloy surface

International Nuclear Information System (INIS)

Wu Di; Liu Xiangdong; Lu Kai; Zhang Yaping; Wang Huan

2009-01-01

Ceramic coatings were fabricated on AZ91D Mg-alloy substrate by microarc oxidation in Na 2 SiO 3 -NaOH-Na 2 EDTA electrolytes with and without C 3 H 8 O 3 addition. The effects of different concentrations of C 3 H 8 O 3 contained in the electrolyte on coatings thickness were investigated. The surface morphologies, RMS roughness, phase compositions and corrosion resistance property of the ceramic coatings were analyzed by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and electrochemical corrosion test respectively. It is found that the addition of C 3 H 8 O 3 into silicate electrolyte leads to increase of the unit-area adsorptive capacity of the negative ions at anode-electrolyte interface and thus improves the compactness and corrosion resistance of the MAO coating. The coating thickness decreases gradually with the increase of concentrations of C 3 H 8 O 3 in the electrolyte. The oxide coating formed in base electrolyte containing 4 mL/L C 3 H 8 O 3 exhibits the best surface appearance, the lowest surface RMS roughness (174 nm) and highest corrosion resistance. In addition, both ceramic coatings treated in base electrolyte with and without C 3 H 8 O 3 are mainly composed of periclase MgO and forsterite Mg 2 SiO 4 phase, but no diffraction peak of Mg phase is found in the patterns.

Dicty_cDB: Contig-U11844-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available 2 ( DV237992 ) A2FLE69TO Aedes aegypti full length cDNA library,... 32 9.1 2 ( DV284078 ) NAAG584TF Aedes aegypti - Fat Bodie...s Normalized (... 32 9.2 2 ( DV273445 ) NAAFZ58TR Aedes aegypti - Fat Bodie

Effect of rare-earth elements and quenching wheel speed on the structure, mechanical and thermal properties of rapidly solidified AZ91 Mg melt-spun ribbons

Energy Technology Data Exchange (ETDEWEB)

Ekrami, A. [Iran University of Industries & Mines, Faculty of Engineering & High-Technology (Iran, Islamic Republic of); Shahri, F., E-mail: fshahri@irost.ir [Iranian Research Organization for Science & Technology, Department of Advanced Materials & Renewable Energy (Iran, Islamic Republic of); Mirak, A. [Iran University of Industries & Mines, Faculty of Engineering & High-Technology (Iran, Islamic Republic of)

2017-01-27

In this work, an attempt is made to study the effects of rare-earth elements as an additive (2 wt% of Ce base misch-metal) and various quenching wheel speeds (10–40 m/s) on the microstructure, thermal and mechanical properties of rapidly solidified AZ91 alloy prepared by single roller melt-spinning process. In this respect, all of the samples were studied using various techniques such as x-ray diffraction (XRD), transmission electron microscopy (TEM), field emission scanning electron microscopy (FESEM), differential scanning calorimetry (DSC) and mechanical properties such as microhardness and tensile tests. The finding bore witness to proposed hypothesis in this study illustrating due to high affinity between Al and RE by adding 2 wt% rare-earth elements in the AZ91alloy, thermally stable Al{sub x}RE{sub y} intermetallic compounds are precipitated and the formation of β-Mg{sub 17}Al{sub 12} phases is reduced. DSC results revealed that by adding RE to AZ91 alloy, AlRE phases got stable up to 500 °C, while for the AZ91 sample, β-Mg{sub 17}Al{sub 12} phase was formed at temperature about 180 °C and then with increasing of temperature dissolved at 410 °C in the α-Mg matrix. Further it has been observed that the higher was the quenching wheel speed, the smaller was the grain size which in turn gives rise to a higher tensile properties (from 406 MPa for quenching wheel speed of 10 m/s to 510 MPa for 40 m/s) for the MM-added alloys. Tensile strength of 386 MPa was obtained for the AZ91 pure alloy which is prepared at wheel speed of 40 m/sec.

Improving the corrosion resistance of AZ91D magnesium alloy through reinforcement with titanium carbides and borides

OpenAIRE

Gobara, Mohamed; Shamekh, Mohamed; Akid, Robert

2015-01-01

A composite consisting of magnesium matrix reinforced with a network of TiC–Ti2AlC–TiB2 particulates has been fabricated using a practical in-situ reactive infiltration technique. The microstructural and phase composition of the magnesium matrix composite (R-Mg) was investigated using SEM/EDS and XRD. The analyses revealed the complete formation of TiC, Ti2AlC and TiB2 particles in the magnesium matrix. Comparative compression tests of R-Mg and AZ91D alloy showed that the reinforcing particle...

An experimental study of 99Tcm-HL91 in detection of myocardial viability

International Nuclear Information System (INIS)

Xu Tao; Liu Baoping; Meng Yubao; Sun Bingqi; Niu Guangjun; Han Xingmin; Yuan Qiao

2005-01-01

Objective: To investigate whether 99 Tc m -4,9-diaza-3,3,10,10-tetramethyldodecan-2,11-dione dioxime (HL91) can be used to distinguish ischemic myocardium segments from infarction segments. Methods: Twenty-five acute myocardial infarction patients (≤6 weeks) and 5 old myocardial infarction patients (> 6 weeks) were included in the study. All the study patients underwent 99 Tc m -HL91 and 99 Tc m -methoxyisobutylisonitrile (MIBI) imaging intervented and unintervented with nitroglycerin, and the myocardium segments were divided into three groups according to 99 Tc m -MIBI imaging results: normal, ischemic, and infarction myocardium segments. The difference of the radial counts of 99 Tc m -HL91 in three groups were analyzed after the imaging with 99 Tc m -HL91. Results: 1) In acute myocardial infarction patients, the accumulation rates of 99 Tc m -HL91 was 95% in normal segment group, 157% in ischemic group, 93% in infarction group. The accumulation rates of 99 Tc m -HL91 in the ischemic group was higher than that in the normal group and infarction group. 2)In old myocardial infarction patients, the accumulation rates of 99 Tc m -HL91 were of no difference among the normal, ischemic, and infarction groups. Conclusion: 99 Tc m -HL91 is a potential marker for detecting the ischemic myocardial tissue. (authors)

Influence of cerium on passivity behavior of wrought AZ91 alloy

International Nuclear Information System (INIS)

Wang Henan; Li Ying; Wang Fuhui

2008-01-01

In this paper, more focus had been put on the passivity behavior of wrought AZ91 alloy with 1.5 mass% Ce. The passive current density of wrought AZ91 alloy increased with addition of Ce and the passive film became unstable. Structures and compositions of the passive films formed on wrought AZ91 alloy without and with Ce in 0.01 M NaOH aqueous solution were analyzed by potentiostatic polarization, potentiostatic-galvanostatic (P-G) transient technique and X-ray photoelectron spectroscopy (XPS). The results showed that Ce only accumulated in the inner layer of passive film in the form of CeO 2 . Further analysis revealed that there were two main effects of Ce on the passive process of wrought AZ91 alloy: first, the existence of CeO 2 in inner layer of passive film made mass transport through the passive film follow tangent hyperbolic (T) impedance instead of Warburg impedance (W); second, donor concentration (N d ) of the passive film increased by a factor 10 when 1.5 mass% Ce existed in wrought AZ91 alloy, which led to the higher passivity current density

Preliminary applied study of assessment ischemic/viable myocardium by 99Tcm-HL91

International Nuclear Information System (INIS)

Liu Gang; Wu Hua

2004-01-01

Objective: To investigate the representation of 99 Tc m -HL91 in the ischemic myocardium, evaluate the diagnosis value of 99 Tc m -HL91 on hypoxic but viable myocardium. Methods: Six patients with cardiac infarction all underwent 99 Tc m -MIBI SPECT and 99 Tc m -HL91 SPECT. Average radioactivity of ischemic area and normal area were respectively obtained by ROI (2 x 2 pixels) on heart minor axis of images, And the radioactivity ratios of target (ischemic area)-to-non target(normal area)were calculated. Results: In image of 99 Tc m -HL91 SPECT, two patients who's radioactivity coloboma of 99 Tc m -MIBI image could be filled with 99 Tc m -HL91, four patients were not caught sight of obvious filling up. Conclusion 99 Tc m -HL91 can be selectively uptaken by ischemic and hypoxic but viable myocardium. it combination of 99 Tc m -MIBI SPECT may be good for accurate diagnosis and differentiation of viable myocardium. (authors)

Correlation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys

International Nuclear Information System (INIS)

Feliu, S.; Pardo, A.; Merino, M.C.; Coy, A.E.; Viejo, F.; Arrabal, R.

2009-01-01

X-ray photoelectron spectroscopy (XPS) was used in order to investigate the correlation between the surface chemistry and the atmospheric corrosion of AZ31, AZ80 and AZ91D magnesium alloys exposed to 98% relative humidity at 50 deg. C. Commercially pure magnesium, used as the reference material, revealed MgO, Mg(OH) 2 and tracers of magnesium carbonate in the air-formed film. For the AZ80 and AZ91D alloys, the amount of magnesium carbonate formed on the surface reached similar values to those of MgO and Mg(OH) 2 . A linear relation between the amount of magnesium carbonate formed on the surface and the subsequent corrosion behaviour in the humid environment was found. The AZ80 alloy revealed the highest amount of magnesium carbonate in the air-formed film and the highest atmospheric corrosion resistance, even higher than the AZ91D alloy, indicating that aluminium distribution in the alloy microstructure influenced the amount of magnesium carbonate formed.

49 CFR 37.91 - Wheelchair locations and food service on intercity rail trains.

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false Wheelchair locations and food service on intercity rail trains. 37.91 Section 37.91 Transportation Office of the Secretary of Transportation TRANSPORTATION SERVICES FOR INDIVIDUALS WITH DISABILITIES (ADA) Acquisition of Accessible Vehicles By Public Entities § 37.91 Wheelchair locations and food...

Effect of mechanical vibrations on the wear behavior of AZ91 Mg alloy

Science.gov (United States)

Chaturvedi, V.; Pandel, U.; Sharma, A.

2018-02-01

AZ91 Mg alloy is the most promising alloy used for structural applications. The vibration induced methods are effective and economic viable in term of mechanical properties. Sliding wear tests were performed on AZ91 Mg alloy using a pin-on- disc configuration. Wear rates were measured at 5 N and 10N at a sliding velocity of 1m/s for varied frequency within the range of 5- 25Hz and a constant amplitude of 2mm. Microstructures of worn surfaces and wear debris were characterized by field emission scanning electron microscopy (FESEM). It is observed that wear resistance of vibrated AZ91 alloy at 15Hz frequency ad 2mm amplitude was superior than cast AZ91 Mg alloy. Finer grain size and equiaxed grain shape both are important parameters for better wear resistance in vibrated AZ91 Mg alloys. FESEM analysis revealed that wear is considerably affected due to frictional heat generated by the relative motion between AZ91 Mg alloy and EN31 steel surface. No single mechanism was responsible for material loss.

40 CFR 179.91 - Burden of going forward; burden of persuasion.

Science.gov (United States)

2010-07-01

... persuasion. 179.91 Section 179.91 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED...; burden of persuasion. (a) The party whose request for an evidentiary hearing was granted has the burden... FFDCA has the burden of persuasion in the hearing on that issue, whether the proceeding concerns the...

14 CFR Appendix E to Part 91 - Airplane Flight Recorder Specifications

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Airplane Flight Recorder Specifications E Appendix E to Part 91 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT OF TRANSPORTATION... Appendix E to Part 91—Airplane Flight Recorder Specifications Parameters Range Installed system 1 minimum...

Dicty_cDB: Contig-U16031-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available iella... 54 4e-09 2 ( EX122338 ) BR106168 mature green leaf cDNA library KHLM Bra...a napus Root library Brassica napu... 50 7e-08 3 ( DV185277 ) CT047_B04_CT047_3700_91.ab1 C. tentans tissue cul... 3 ( EH423460 ) OL6023R Brassica oleracea var. alboglabra leaf cD... 54 3e-09 3 ( EX128986 ) BR112816 ovule and silique cDNA library..... 44 6e-07 3 ( EC773501 ) EST 9997 Guarana fruits cDNA library Paullinia cu... 58 6e-07 3 ( EV830362 ) TTSA...visiae chromosome IV reading frame ORF YDR025w. 52 1e-09 3 ( EX054146 ) BR038790 floral buds cDNA library

Report and accounts 1990-91

International Nuclear Information System (INIS)

1991-01-01

Corporate information from Nuclear Electric is provided in this report and accounts 1990-91, the first full year of Nuclear Electric's operation. The Chairman's report is presented first then there is a review of the year. This overviews financial performance, production, health and safety, commercial aspects, finance, construction (of Sizewell-B station), environmental and corporate affairs. A statistical summary - also available separately and indexed separately - is included. The Directors' report, financial statements and detailed accounts complete this report. (UK)

Toxicity of inhaled 91YCl3 in Beagle dogs. XVII

International Nuclear Information System (INIS)

Hahn, F.F.; Muggenburg, B.A.; Boecker, B.B.; Jones, R.K.; McClellan, R.O.; Pickrell, J.A.

1983-01-01

The metabolism, dosimetry, and biological effects of inhaled 91 YCl 3 in Beagle dogs are being studied. Forty-two dogs with initial 91 Y body burdens from 14 to 1300 μCi/kg body weight and 12 control dogs were observed during their life spans. Four additional dogs with a mean initial body burden of 180 μCi 91 Y/kg body weight were placed in a sacrifice study. All 46 of the exposed dogs and all 12 of the control dogs have died. Dogs with the highest initial body burdens died with bone marrow damage and pancytopenia. Three dogs died with nasal cavity carcinomas, three died with pulmonary carcinomas, and one died with hepatic hemangiosarcoma. These cancers all appeared to be related to radiation injury. Control dogs died of miscellaneous neoplastic and chronic diseases

Generation of poly-β-hydroxybutyrate from acetate in higher plants: Detection of acetoacetyl CoA reductase- and PHB synthase- activities in rice.

Science.gov (United States)

Tsuda, Hirohisa; Shiraki, Mari; Inoue, Eri; Saito, Terumi

2016-08-20

It has been reported that Poly-β-hydroxybutyrate (PHB) is generated from acetate in the rice root. However, no information is available about the biosynthetic pathway of PHB from acetate in plant cells. In the bacterium Ralstonia eutropha H16 (R. eutropha), PHB is synthesized from acetyl CoA by the consecutive reaction of three enzymes: β-ketothiolase (EC: 2.3.1.9), acetoacetyl CoA reductase (EC: 1.1.1.36) and PHB synthase (EC: 2.3.1.-). Thus, in this study, we examined whether the above three enzymatic activities were also detected in rice seedlings. The results clearly showed that the activities of the above three enzymes were all detected in rice. In particular, the PHB synthase activity was detected specifically in the sonicated particulate fractions (2000g 10min precipitate (ppt) and the 8000g 30min ppt) of rice roots and leaves. In addition to these enzyme activities, several new experimental results were obtained on PHB synthesis in higher plants: (a) (14)C-PHB generated from 2-(14)C-acetate was mainly localized in the 2000g 10min ppt and the 8000g 30min ppt of rice root. (b) Addition of acetate (0.1-10mM) to culture medium of rice seedlings did not increase the content of PHB in the rice root or leaf. (c) In addition to C3 plants, PHB was generated from acetate in a C4 plant (corn) and in a CAM plant (Bryophyllum pinnatum). d) Washing with ethylenediaminetetraacetic acid (EDTA) strongly suggested that the PHB synthesized from acetate was of plant origin and was not bacterial contamination. Copyright © 2016 Elsevier GmbH. All rights reserved.

Preliminary clinical study of 99Tcm-HL91 imaging in bone metastasis

International Nuclear Information System (INIS)

Liu Baoping; Mao Ronghu; Han Xingmin

2008-01-01

Objective: 99 Tc m -4, 9-diaza-3, 3, 10, 10-tetramethyldodecan-2, 11-dione dioxime (HL91), a new type of hypoxic agents, accumulates in tumor hypoxic tissue specifically. The aim of this study was to evaluate the value of 99 Tc m -HL91 imaging in the diagnosis of bone metastasis. Methods: Nine- teen cases with bone metastasis (without any treatment) and 8 cases with benign lesions underwent SPECT imaging at 4 h after injection of 740 MBq of 99 Tc m -HL91 along with 99 Tc m -methylene diphosphonic acid (MDP) imaging. Regions of interest (ROIs) were drawn in tumor tissue and contralateral normal tissue respectively, and the radioactivity ratios of tumor-to-normal (T/N) were calculated. The t-test was used for data analysis with SPSS 11.0. Results: There were visible uptake of 99 Tc m -HL91 in 79 out of 85 focuses in 19 patients of bone metastasis; however, there was no obvious uptake of 99 Tc m -HL91 in 12 focuses of 8 patients of benign lesions. Significant difference existed between the T/N values of malignant (1.877 ± 0.288) and benign lesions [(0.735 ± 0.236); t=13.065, P 0.05). Conclusion: The results indicated that 99 Tc m -HL91 was useful in diagnosing the malignant and benign bone lesions. (authors)

Isolated Poly(3-Hydroxybutyrate) (PHB) Granules Are Complex Bacterial Organelles Catalyzing Formation of PHB from Acetyl Coenzyme A (CoA) and Degradation of PHB to Acetyl-CoA▿

OpenAIRE

Uchino, Keiichi; Saito, Terumi; Gebauer, Birgit; Jendrossek, Dieter

2007-01-01

Poly(3-hydroxybutyrate) (PHB) granules isolated in native form (nPHB granules) from Ralstonia eutropha catalyzed formation of PHB from 14C-labeled acetyl coenzyme A (CoA) in the presence of NADPH and concomitantly released CoA, revealing that PHB biosynthetic proteins (acetoacetyl-CoA thiolase, acetoacetyl-CoA reductase, and PHB synthase) are present and active in isolated nPHB granules in vitro. nPHB granules also catalyzed thiolytic cleavage of PHB in the presence of added CoA, resulting in...

Evaluation of microstructural effects on the corrosion behaviour of AZ91D magnesium alloy

DEFF Research Database (Denmark)

Ambat, Rajan; Aung, Naing Naing; Zhou, W.

2000-01-01

The effect of microconstituents on the corrosion and electrochemical behaviour of AZ91D alloy prepared by die-casting and ingot casting route has been investigated in 3.5% NaCl solution at pH 7.25. The experimental techniques used include constant immersion technique, in-situ corrosion monitoring....... The corrosion products for ingot consisted of Mg(OH)(2) with small amounts beta phase, magnesium-aluminum oxide and MgH2 while for die-cast, the product showed a highly amorphous structure. (C) 2000 Elsevier Science Ltd. All rights reserved....

Creep behavior and evolution of microstructure of modified Grade 91 welded joint after short term exposure at 500 deg C; Fluage a 500 deg C d'un joint soude d'un acier 9Cr-1Mo modifie. Evolution de la microstructure et comportement mecanique

Energy Technology Data Exchange (ETDEWEB)

Vivier, F.

2009-03-15

With the increase in worldwide energy demand, the nuclear industry is a way of producing electricity on a large scale and to answer to this need. For the design of a new generation of fission nuclear reactors and among six chosen fission reactor systems, France develops in particularly the Very High Temperature Reactor (VHTR) concept. This implies the use of materials that are more and more resistant to high temperature for long-term exposure. AREVA focuses on materials already used in fossil-fuel power plant, so that the mechanical behaviour of Grade 91 (Fe{sub 9}Cr{sub 1}MoNbV) has to be investigated. This ferritic-martensitic steel is considered to be a potential candidate for welded components. Such structures are combined with welded joints, which have to be studied. Three industrial partners (AREVA, CEA, EDF) have launched a study with the Centre des Materiaux in order to investigate the creep of welded joint of Grade 91. The aim of this work is to complete the available database about the mechanical behaviour of Grade 91, base metal and welded joint, during creep tests performed at 500 C up to 4500 h exposure. Thermal aging tests, tensile tests, and creep tests were performed at 450 C and 500 C using both base metal and cross-weld samples. Several geometries of cross-weld creep specimens were tested. The microstructure has not remarkably changed after tests concerning both nature and size of precipitates, and the characteristic size of the matrix sub-structure. The creep damage is not developed in the ruptured specimens after creep tests. Only little damage by cavity nucleation and growth was found in the creep specimens. Creep fracture at 500 C takes places by viscoplastic flow, contrary to tests performed at 625 C where the creep-induced damage governs the creep rupture at least for long-term lifetime. From creep curves of base metal and cross-weld specimens, a phenomenological model is proposed. The flow rule is a Norton power law with a stress exponent

Cosmochemical implications of CONSERT permittivity characterization of 67P/C-G

Science.gov (United States)

Levasseur-Regourd, A.; Hérique, Alain; Kofman, Wlodek; Beck, Pierre; Bonal, Lydie; Buttarazzi, Ilaria; Heggy, Essam; Lasue, Jeremie; Quirico, Eric; Zine, Sonia

2016-10-01

Unique information about the internal structure of the nucleus of comet 67P/C-G was provided by the CONSERT bistatic radar on-board Rosetta and Philae [1]. Analysis of the propagation of its signal throughout the small lobe indicated that the real part of the permittivity at 90 MHz is of (1.27±0.05). The first interpretation of this value using dielectric properties of mixtures of dust and ices (H2O, CO2), led to the conclusion that the comet porosity ranges between 75-85%. In addition, the dust/ice ratio was found to range between 0.4-2.6 and the permittivity of dust (including 30% of porosity) was determined to be lower than 2.9.The dust permittivity estimate is now reduced by taking into account the updated values of nucleus density and of dust/ice ratio, in order of providing further insights into the nature of the constituents of comet 67P/C-G [2]. We adopt a systematic approach: i) determination of the dust permittivity as a function of the ice (I) to dust (D) and vacuum (V) volume fraction; ii) comparison with the permittivity of meteoritic, mineral and organic materials from literature and laboratory measurements; iii) test of several composition models of the nucleus, corresponding to cosmochemical end members of 67P/C-G. For each of these models the location in the ternary I/D/V diagram is calculated based on available dielectric measurements, and confronted to the locus of 67P/C-G. The number of compliant models is small and the cosmochemical implications of each are discussed [2]. An important fraction of carbonaceous material is required in the dust in order to match CONSERT permittivity observations, establishing that comets represent a massive carbon reservoir.Support from Centre National d'Études Spatiales (CNES, France) for this work, based on observations with CONSERT on board Rosetta, is acknowledged. The CONSERT instrument was designed, built and operated by IPAG, LATMOS and MPS and was financially supported by CNES, CNRS, UJF/UGA, DLR and MPS

14 CFR 91.1411 - Continuous airworthiness maintenance program use by fractional ownership program manager.

Science.gov (United States)

2010-01-01

... program use by fractional ownership program manager. 91.1411 Section 91.1411 Aeronautics and Space FEDERAL... airworthiness maintenance program use by fractional ownership program manager. Fractional ownership program... through 91.1443. Any program manager who elects to maintain the program aircraft using a continuous...

Stereoselective bioaccumulation of chiral PCB 91 in earthworm and its metabolomic and lipidomic responses.

Science.gov (United States)

He, Zeying; Wang, Yuehua; Zhang, Yanwei; Cheng, Haiyan; Liu, Xiaowei

2018-07-01

Stereoselective bioaccumulation, elimination, metabolomic and lipidomic responses of earthworm Eisenia fetida exposed to chiral polychlorinated biphenyl (PCB) 91 in an earthworm-soil system were investigated. Preferential bioaccumulation of (-)-PCB 91 and elimination of (+)-PCB 91 were observed following 50 and 500 μg/kg dwt exposures. Enantiomer fraction (EF) values decreased over time during the uptake and elimination periods. Metabolomics and lipidomics techniques based on ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS) revealed significant changes in 108 metabolites after earthworms exposure to (+)-, (-)-, and (±)-PCB 91, compared to control groups. Forty two of these metabolites were identified as amino acids, nucleosides, fatty acids, dicarboxylic acids, vitamins or others. Lysophospholipids including six lysophosphatidylcholines (LPC), six lysophosphatidylethanolamine (LPE), eight lysophosphatidylinositol (LPI) and five lysophosphatidylserine (LPS) were also differentially expressed between exposure and control groups. Alterations in the levels of metabolites and lipids indicated stereoselective effects of chiral PCB 91 on earthworm amino acid, energy, and nucleotide metabolism, neurodevelopment and gene expression. Overall, the effects of (+)-PCB 91 were more pronounced than that of (-)- and (±)-PCB 91. Copyright © 2018 Elsevier Ltd. All rights reserved.

File list: InP.Bld.20.AllAg.M0-91 [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Bld.20.AllAg.M0-91 hg19 Input control Blood M0-91 SRX262147,SRX262153,SRX262150...,SRX262144 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.Bld.20.AllAg.M0-91.bed ...

File list: InP.Bld.10.AllAg.M0-91 [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Bld.10.AllAg.M0-91 hg19 Input control Blood M0-91 SRX262150,SRX262147,SRX262153...,SRX262144 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.Bld.10.AllAg.M0-91.bed ...

File list: InP.Bld.05.AllAg.M0-91 [Chip-atlas[Archive

Lifescience Database Archive (English)

Full Text Available InP.Bld.05.AllAg.M0-91 hg19 Input control Blood M0-91 SRX262150,SRX262153,SRX262144...,SRX262147 http://dbarchive.biosciencedbc.jp/kyushu-u/hg19/assembled/InP.Bld.05.AllAg.M0-91.bed ...

Study mechanism of growth and spallation of oxide scales formed after T91 steel oxidation in water vapor at 550 C

International Nuclear Information System (INIS)

Demizieux, Marie-Christine

2015-01-01

In the framework of the development of Generation IV reactors and specifically in the new Sodium Fast Reactor (SFR) project, Fe-9Cr ferritic-martensitic steels are candidates as structural materials for steam generators. Indeed, Fe-9Cr steels are already widely used in high temperature steam environments - like boilers and steam turbines- for their combination of creep strength and high thermal properties. Many studies have been focused on Fe-9Cr steels oxidation behavior between 550 C-700 C.Depending on the oxidizing environment, formation of a triplex (Fe-Cr spinel/magnetite/hematite) or duplex (Fe-Cr spinel/magnetite) oxide scales are reported.. Besides, for long time exposure in steam, the exfoliation of oxide scales can cause serious problems such as tube obstruction and steam turbine erosion. Consequently, this work has been dedicated to study, on the one hand the oxidation kinetics of T91 steel in water vapor environments, and on the other hand, the mechanisms leading to the spallation of the oxide scale. Oxidation tests have been carried out at 550 C in pure water vapor and in Ar/D_2O/H_2 environments with different hydrogen contents. Based on an analytical resolution, a quantitative modeling has shown that the 'available space model' proposed in the literature for duplex oxide scale formation well reproduces both scales growth kinetics and spinel oxide stoichiometry. Then, oxidized samples have been precisely characterized and it turns out that buckling then spalling of the oxide scale is always located in the magnetite layer. Voids observed in the magnetite layer are major initiation sites of de-cohesion of the outer oxide scale. A mechanism of formation of these voids has been proposed, in accordance with the mechanism of duplex scale formation. The derived model based on the assumption that vacancies accumulate where the iron vacancies flux divergence is maximal gives a good estimation of the location of pores inside the magnetite layer. Then, in order

Constitutive modelling of sandvik 1RK91

NARCIS (Netherlands)

Datta, K.; Datta, K.; Hommes, M.; Post, J.; Geijselaers, Hubertus J.M.; Huetink, Han; Beyer, J.; Onate, E; Owen, D.R.J

2003-01-01

A physically based constitutive equation is being developed for the maraging stainless steel Sandvik 1RK91. The steel is used to make precision parts. These parts are formed through multistage forming operations and heat treatments from cold rolled and annealed sheets. The specific alloy is designed

Corrosion properties and corrosion evolution of as-cast AZ91 alloy with rare earth yttrium

International Nuclear Information System (INIS)

Luo, T.J.; Yang, Y.S.

2011-01-01

Highlights: → Minor addition of Y will increase the corrosion resistance of AZ91 alloy, and 0.3 wt.% Y is the optimum addition. → A film composed of Mg(OH) 2 , MgCO 3 , Al(OH) 3 and Al 2 O 3 is formed on the surface of AZ91 alloy with rare earth Y free. → The film of AZ91 alloy with 0.3 wt.% Y is mainly composed of Mg(OH) 2 and MgCO 3 without any Al(OH) 3 and Al 2 O 3 . → The relative quantity of MgCO 3 in the surface film of AZ91 + 0.3 wt.% Y is bigger than that of AZ91 alloy with Y free. → Y 2 O 3 phase is found in the surface film of alloy III, which benefits to stabilize the surface film. -- Abstract: The corrosion resistance property and the corrosion evolution of as-cast AZ91 alloy with rare earth Y addition are investigated by using immersion tests, electrochemical impedance spectroscopy (EIS), and X-ray photoelectron spectroscopy (XPS). The results show that the proper amount of Y in the alloys can improve the corrosion resistance of AZ91 alloys effectively. With the increment of Y, the corrosion rate of the modified AZ91 alloys by Y addition was markedly less than that of AZ91 alloy. The corrosion rate of AZ91 alloy with 0.3 wt.% Y was the slightest, but further addition of Y content over 0.3 wt.% make the corrosion heavier. The XPS analysis suggests that the compound film of AZ91 alloy with 0.3 wt.% Y is mainly composed of Mg(OH) 2 and MgCO 3 without any Al(OH) 3 and Al 2 O 3 , in addition, Y 2 O 3 phase is found in the compound film of AZ91 alloy with 0.3 wt.% Y, which benefits to stabilize the surface film.

City centres in the internet age : Exploring the implications of b2c e-commerce for retailing at city centres in the Netherlands

NARCIS (Netherlands)

Weltevreden, J.W.J.

2006-01-01

The rapid development of Internet use and b2c e-commerce led to many speculations about the impacts of ICT on society. In the Netherlands, there is a growing concern about the implications of b2c e-commerce for city centre retailing. Therefore, this dissertation has empirically investigated the

An experimental study on cerebral ischemic penumbra imaging with 99Tcm-HL91

International Nuclear Information System (INIS)

Zhu Cansheng; Jiang Ningyi

2002-01-01

Objective: To investigate the biodistribution of 99 Tc m -4,9-diaza-3,3,10,10-tetramethyl dodecan-2,11-dione dioxime (HL91) in rat model of middle cerebral artery occlusion (MCAO). Methods: Thirty-one MCAO rats were established. Fourteen rats were used to study the biodistribution of 99 Tc m -HL91 and 15 rats were used to study the distribution of 99 Tc m -HL91 in the brain of MCAO model rats. Autoradiographic study of brain was also done in 16 MCAO model rats. Results: The liver and kidney retention were higher than that in other tissues. At 1 h after injection, small intestine retention was also high. But radioactivity in normal brain was low. Retention in target site was higher than that in non-target site. Difference between subgroups of operation and that of pseudo operation was significant (P 99 Tc m -HL91 at the target-ischemic area was shown in the autoradiograph. By using computer-enhanced image analysis, difference between target site and non-target site in the same autoradiograph and the differences between operation subgroups and that of pseudo-subgroups were all significant via Dunnett t-test and One-Way ANOVA. Conclusions: 99 Tc m -HL91 can be avidly taken up by ischemic penumbra and target/non-target ratio is high. 99 Tc m -HL91 is a potential agent for hypoxic tissue imaging, and 99 Tc m -HL91 SPECT is a promising modality in detecting the ischemic penumbra

Application of 99Tcm-HL-91 in the hypoxia study of malignant lymphoma

International Nuclear Information System (INIS)

Li Li; Han Peizhen; Yan Yujun; Wang Yueying; Wang Junqi; Li Meijia

2002-01-01

Objective: 99 Tc m -HL91 is a putative hypoxic tracer probing hypoxia in solid tumors. This study was aimed at investigating the property of the spontaneous IRM-2-ML malignant lymphoma in homozygotic IRM-2 mice, and at testing the applicability of 99 Tc m -HL91 to the imaging of hypoxia in tumors. Methods: Biodistribution of 99 Tc m -HL91 after intravenously injection into normal and tumor-bearing IRM-2 mice was studied by determining blood and tissue levels of radioactivity from 20 to 360 min after injection. Nicotinamide was used to reduce the extent of hypoxia in the tumors. Planar SPECT imaging on normal and tumor-bearing IRM-2 mice was also performed. Results: Tumor load did not significantly influence the retention of 99 Tc m -HL91 in normal organs. 99 Tc m -HL91 was metabolized mainly via the liver and kidney, and was cleared fast from the blood. The tumor-to-blood ratio and tumor-to-muscle ratio continued to increase until 360 min (2.63 +- 0.25 and 3.37 +- 0.22 at 120 min, 3.51 +- 0.17 and 6.44 +- 0.29 at 360 min, respectively). The retention of 99 Tc m -HL91 in the tumor was reduced in mice by treatment with nicotinamide. Planar SPECT imaging showed that tumor could be observed clearly. Conclusion: These results confirm that IRM-2-ML malignant lymphoma possesses the common property of solid tumors,and also indicate that 99 Tc m -HL91 could be used to detect tumor hypoxia

Fatal case of hemolytic-uremic syndrome in an adult due to a rare serogroup O91 Entero hemorrhagic Escherichia coli associated with a Clostridium difficile infection. More than meets the eye

Directory of Open Access Journals (Sweden)

Thomas Guillard

2015-08-01

Full Text Available Hemolytic-uremic syndrome due to enterohemorrhagic Escherichia coli, belonging to serogroup O91 has rarely been described. We report here a case of post-diarrheal HUS due to EHEC O91 in an elderly patient for whom diagnosis was delayed given a previously diagnosed C. difficile infection. This case highlights the usefulness of Shiga-toxin detection.

Corrosion resistance of titanium ion implanted AZ91 magnesium alloy

International Nuclear Information System (INIS)

Liu Chenglong; Xin Yunchang; Tian Xiubo; Zhao, J.; Chu, Paul K.

2007-01-01

Degradable metal alloys constitute a new class of materials for load-bearing biomedical implants. Owing to their good mechanical properties and biocompatibility, magnesium alloys are promising in degradable prosthetic implants. The objective of this study is to improve the corrosion behavior of surgical AZ91 magnesium alloy by titanium ion implantation. The surface characteristics of the ion implanted layer in the magnesium alloys are examined. The authors' results disclose that an intermixed layer is produced and the surface oxidized films are mainly composed of titanium oxide with a lesser amount of magnesium oxide. X-ray photoelectron spectroscopy reveals that the oxide has three layers. The outer layer which is 10 nm thick is mainly composed of MgO and TiO 2 with some Mg(OH) 2 . The middle layer that is 50 nm thick comprises predominantly TiO 2 and MgO with minor contributions from MgAl 2 O 4 and TiO. The third layer from the surface is rich in metallic Mg, Ti, Al, and Ti 3 Al. The effects of Ti ion implantation on the corrosion resistance and electrochemical behavior of the magnesium alloys are investigated in simulated body fluids at 37±1 deg. C using electrochemical impedance spectroscopy and open circuit potential techniques. Compared to the unimplanted AZ91 alloy, titanium ion implantation significantly shifts the open circuit potential (OCP) to a more positive potential and improves the corrosion resistance at OCP. This phenomenon can be ascribed to the more compact surface oxide film, enhanced reoxidation on the implanted surface, as well as the increased β-Mg 12 Al 17 phase

Corrosion behaviour of laser surface melted magnesium alloy AZ91D

International Nuclear Information System (INIS)

Taltavull, C.; Torres, B.; Lopez, A.J.; Rodrigo, P.; Otero, E.; Atrens, A.; Rams, J.

2014-01-01

A high power diode laser (HPDL) was used to produce laser surface melting (LSM) treatments on the surface of the Mg alloy AZ91D. Different treatments with different microstructures were produced by varying the laser-beam power and laser-scanning speed. Corrosion evaluation, using hydrogen evolution and electrochemical measurements, led to a relationship between microstructure and corrosion. Most corrosion rates for LSM treated specimens were within the scatter of the as-received AZ91D, whereas some treatments gave higher corrosion rates and some of the samples had corrosion rates lower than the average of the corrosion rate for AZ91D. There were differences in corroded surface morphology. Nevertheless laser treatments introduced surface discontinuities, which masked the effect of the microstructure. Removing these surface defects decreased the corrosion rate for the laser-treated samples. - Highlights: • Corrosion behavior of AZ91D Mg alloys is intimately related with its microstructure. • Laser surface melting treatments allows surface modification of the microstructure. • Different laser parameters can achieve different microstructures. • Controlling laser parameters can produce different corrosion rates and morphologies. • Increase of surface roughness due to laser treatment is relevant to the corrosion rate

To be or not to be a poly(3-hydroxybutyrate) (PHB) depolymerase: PhaZd1 (PhaZ6) and PhaZd2 (PhaZ7) of Ralstonia eutropha, highly active PHB depolymerases with no detectable role in mobilization of accumulated PHB.

Science.gov (United States)

Sznajder, Anna; Jendrossek, Dieter

2014-08-01

The putative physiological functions of two related intracellular poly(3-hydroxybutyrate) (PHB) depolymerases, PhaZd1 and PhaZd2, of Ralstonia eutropha H16 were investigated. Purified PhaZd1 and PhaZd2 were active with native PHB granules in vitro. Partial removal of the proteinaceous surface layer of native PHB granules by trypsin treatment or the use of PHB granules isolated from ΔphaP1 or ΔphaP1-phaP5 mutant strains resulted in increased specific PHB depolymerase activity, especially for PhaZd2. Constitutive expression of PhaZd1 or PhaZd2 reduced or even prevented the accumulation of PHB under PHB-permissive conditions in vivo. Expression of translational fusions of enhanced yellow fluorescent protein (EYFP) with PhaZd1 and PhaZd2 in which the active-site serines (S190 and Ser193) were replaced with alanine resulted in the colocalization of only PhaZd1 fusions with PHB granules. C-terminal fusions of inactive PhaZd2(S193A) with EYFP revealed the presence of spindle-like structures, and no colocalization with PHB granules was observed. Chromosomal deletion of phaZd1, phaZd2, or both depolymerase genes had no significant effect on PHB accumulation and mobilization during growth in nutrient broth (NB) or NB-gluconate medium. Moreover, neither proteome analysis of purified native PHB granules nor lacZ fusion studies gave any indication that PhaZd1 or PhaZd2 was detectably present in the PHB granule fraction or expressed at all during growth on NB-gluconate medium. In conclusion, PhaZd1 and PhaZd2 are two PHB depolymerases with a high capacity to degrade PHB when artificially expressed but are apparently not involved in PHB mobilization in the wild type. The true in vivo functions of PhaZd1 and PhaZd2 remain obscure. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

Toxicity of inhaled 91YCl3 in Beagle dogs. XVIII

International Nuclear Information System (INIS)

Hahn, F.F.; Muggenburg, B.A.; Boecker, B.B.; Jones, R.K.; McClellan, R.O.; Pickrell, J.A.

1984-01-01

The metabolism, dosimetry, and biological effects of inhaled 91 YCl 3 were studied in Beagle dogs. Forty-two dogs with initial 91 Y body burdens from 14 to 1300 μCi/kg (0.52-48 MBq/kg) body weight and 12 control dogs were observed during their life spans. Four additional dogs with a mean initial body burden of 180 μCi 91 Y/kg (6.7 MBq/kg) body weight were placed in a sacrifice study. All 46 of the exposed dogs and all 12 of the control dogs have died. Dogs with the highest initial body burdens died with bone marrow damage and pancytopenia. Of the dogs dying of late-occurring effects, three died with nasal cavity carcinomas, three died with pulmonary carcinomas, and one died with hepatic hemangiosarcoma. These cancers all appeared to be related to radiation injury. Control dogs died of miscellaneous neoplastic and chronic diseases. 1 reference, 1 figure, 3 tables

Ethane's 12C/13C Ratio in Titan: Implications for Methane Replenishment

Science.gov (United States)

Jennings, Donald E.; Nixon, C. A.; Romani, P. N.; Bjoraker, G. L.; Sada, P. V.; Lunsford, A. W.; Boyle, R. J.; Hesman, B. E.; McCabe, G. H.

2009-01-01

As the .main destination of carbon in the destruction of methane in the atmosphere of Titan, ethane provides information about the carbon isotopic composition of the reservoir from which methane is replenished. If the amount of methane entering the atmosphere is presently equal to the amount converted to ethane, the 12C/13C ratio in ethane should be close to the ratio in the reservoir. We have measured the 12C/13C ratio in ethane both with Cassini CIRS(exp 1) and from the ground and find that it is very close to the telluric standard and outer planet values (89), consistent with a primordial origin for the methane reservoir. The lower 12C/13C ratio measured for methane by Huygens GCMS (82.3) can be explained if the conversion of CH4 to CH3 (and C2H6) favors 12C over 13C with a carbon kinetic isotope effect of 1.08. The time required for the atmospheric methane to reach equilibrium, i.e., for replenishment to equal destruction, is approximately 5 methane atmospheric lifetimes.

Microstructure evolution and mechanical properties of nano-SiCp/AZ91 composite processed by extrusion and equal channel angular pressing (ECAP)

Energy Technology Data Exchange (ETDEWEB)

Qiao, X.G.; Ying, T. [School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001 (China); Zheng, M.Y., E-mail: zhenghe@hit.edu.cn [School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001 (China); Wei, E.D.; Wu, K.; Hu, X.S. [School of Materials Science and Engineering, Harbin Institute of Technology, Harbin 150001 (China); Gan, W.M.; Brokmeier, H.G. [Institute of Materials Research, Helmholtz-Centre Geesthacht, D-21502 Geesthacht (Germany); Golovin, I.S. [Department of Physical Metallurgy of Non-Ferrous Metals, National University of Science and Technology “MISiS”, Leninsky ave. 4, 119049 Moscow (Russian Federation)

2016-11-15

Nano-SiCp/AZ91 magnesium matrix composite was fabricated by stir casting. The as-cast ingots were extruded at 350 °C, then processed by equal channel angular pressing (ECAP) at various temperatures (250 °C, 300 °C and 350 °C). Grains are significantly refined after the extrusion and the ECAP. A basal fibre texture was detected by neutron diffraction after the extrusion, which inclines about 45° to the extrusion direction (ED) after the ECAP. Nano-scaled SiC particles agglomerate in the as-cast composite. After the extrusion, the agglomeration tends to form continuous or discontinuous strips along the extrusion direction. By application of the ECAP, the agglomerated SiC particles are partly dispersed and the strips formed during the extrusion tend to be thinner and broken with the increasing pass number. The yield tensile strength (YTS) and the ultimate tensile strength (UTS) of the composite are dramatically increased after the extrusion. ECAP for one pass at various temperatures further increases the strength, however, the YTS decreases with the increasing ECAP temperature and the pass number. The Orowan equations predict the maximum YTS of the composite may be up to 400 MPa providing SiC particles are homogenously distributed in the matrix. - Highlights: •Nano-scaled SiC particles were successfully added into AZ91 by stirring casting. •Agglomeration of nano-particles were improved by extrusion and ECAP. •Yield strength of the composite is 328 MPa after one pass of ECAP. •Further ECAP process with optimized parameters may fully disperse nano-particles. •Yield strength is predicted to up to 400 MPa when particles are fully dispersed.

AFRREV, 9(1), S/NO 36, JANUARY, 2015

African Journals Online (AJOL)

EMILIA

An International Multidisciplinary Journal, Ethiopia. Vol. 9(1), Serial No ... The methodology used in the study is content analysis method. The literature ... Introduction. A budget is a financial/and or quantitative statement prepared and approved.

40 CFR 91.408 - Pre-test procedures.

Science.gov (United States)

2010-07-01

....408 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED... accordance with § 91.117. (b) Engine pre-test preparation. (1) Drain and charge the fuel tank(s) with the..., including the sample probe, using mode 1 from Table 2 in appendix A of this subpart. The emission sampling...

14 CFR 125.91 - Airplane requirements: General.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Airplane requirements: General. 125.91... AND OPERATIONS: AIRPLANES HAVING A SEATING CAPACITY OF 20 OR MORE PASSENGERS OR A MAXIMUM PAYLOAD CAPACITY OF 6,000 POUNDS OR MORE; AND RULES GOVERNING PERSONS ON BOARD SUCH AIRCRAFT Airplane Requirements...

Study of microstress state of P91 steel using complementary mechanical Barkhausen, magnetoacoustic emission, and X-ray diffraction techniques

Energy Technology Data Exchange (ETDEWEB)

Augustyniak, Bolesław, E-mail: bolek@mif.pg.gda.pl; Piotrowski, Leszek; Maciakowski, Paweł; Chmielewski, Marek [Faculty of Applied Physics and Mathematics, Gdansk University of Technology, 80-233 Gdansk (Poland); Lech-Grega, Marzena; Żelechowski, Janusz [The Institute of Non-Ferrous Metals, 32-050 Skawina (Poland)

2014-05-07

The paper deals with assessment of microstress state of martensite P91 steel using three complementary techniques: mechanical Barkhausen emission, magnetoacoustic emission (MAE), and X-ray diffraction (XRD) profile analysis. Magnetic coercivity Hc and microstructure were investigated with inductive magnetometry and magnetic force microscopy (MFM), respectively. Internal stress level of P91 steel was modified by heat treatment. Steel samples were austenitized, quenched, and then tempered at three temperatures (720 °C, 750 °C, and 780 °C) during increasing time (from 15 min up to 240 min). The microstrain level ε{sub i} was evaluated using Williamson–Hall method. It was revealed that during tempering microstrain systematically decreases from ε{sub i} = 2.5 × 10{sup −3} for as quenched state down to ε{sub i} = 0.3 × 10{sup −3} for well tempered samples. Both mechanical hardness (Vicker's HV) and magnetic hardness (coercivity) decrease almost linearly with decreasing microstrain while the MAE and MBE intensities strongly increase. Tempering leads to evident shift of the MeBN intensity maximum recorded for the first load towards lower applied strain values and to increase of MAE intensity. This indicates that the microstress state deduced by magnetic techniques is correlated with microstrains evaluated with XRD technique.

Annual report 1990/91 for the Hamburg air monitoring network

International Nuclear Information System (INIS)

Goemer, D.; Hache, W.; Matzen, D.; Reich, T.

1992-01-01

In addition to measured results form the stationary air monitoring network from 1990 (detailed report) and 1991 (brief version), the annual report 1990/91 presents results form special measuring programs of the dynmao car area and from measurements made on the street dating from 1990/91. After a detailed presentation of the meteorological frame conditions in 1990, distinguishing by a relatively good air exchange, a detailed discussion of the air load during this period and a brief survey about the air quality in 1991 follows. (orig.) [de

Microstructural evolution and tensile mechanical properties of thixoformed AZ91D magnesium alloy with the addition of yttrium

International Nuclear Information System (INIS)

Zhao Zude; Chen Qiang; Kang Feng; Shu Dayu

2009-01-01

The microstructure evolution of AZ91D magnesium alloy in the semi-solid state has been proposed or reported in previous literature. However, no detailed investigation has been conducted regarding the relationship between the microstructure and tensile mechanical properties of the thixoformed AZ91D magnesium alloy. In this paper, the microstructure of AZ91D alloy with the addition of yttrium was produced by the semi-solid thermal transformation (SSTT) route and the strain-induced melt activation (SIMA) route, respectively. Isothermal holding experiments investigated grain coarsening and the degree of spheroidization as a function of holding time in the semi-solid state. The SSTT route and the SIMA route were used to obtain the semi-solid feedstock for thixoforming. The results show that solid particles of the SSTT alloy are spheroidized to some extent but the previous irregular shape is still obvious in some of them. While the SIMA alloy exhibits ideal, fine microstructure, in which completely spheroidized solid particles contain little entrapped liquid. The microstructure of the SSTT alloy is less spheroidized compared with the SIMA alloy under the similar isothermal holding condition. As the holding time increases, the mean solid particle size of the SSTT alloy decreases initially, then increases, while the mean solid particle size of the SIMA alloy increases monotonously at 560 deg. C. Compared with the SSTT alloy, the SIMA alloy obtains finer grains under the similar isothermal holding condition. The mechanical properties of the thixoformed AZ91D alloy with the addition of yttrium produced by the SIMA route are better than those of the thixoformed alloy produced by the SSTT route. The ultimate tensile strength, yield strength and elongation for the thixoformed alloy produced by the SIMA route are 303.1 MPa, 147.6 MPa and 13.27%, respectively. The tensile properties for the AZ91D alloy with the addition of yttrium thixoformed from starting material produced by

14 CFR 91.21 - Portable electronic devices.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Portable electronic devices. 91.21 Section... electronic devices. (a) Except as provided in paragraph (b) of this section, no person may operate, nor may any operator or pilot in command of an aircraft allow the operation of, any portable electronic device...

Light-induced translocation of RGS9-1 and Gβ5L in mouse rod photoreceptors.

Directory of Open Access Journals (Sweden)

Mei Tian

Full Text Available The transducin GTPase-accelerating protein complex, which determines the photoresponse duration of photoreceptors, is composed of RGS9-1, Gβ5L and R9AP. Here we report that RGS9-1 and Gβ5L change their distribution in rods during light/dark adaptation. Upon prolonged dark adaptation, RGS9-1 and Gβ5L are primarily located in rod inner segments. But very dim-light exposure quickly translocates them to the outer segments. In contrast, their anchor protein R9AP remains in the outer segment at all times. In the dark, Gβ5L's interaction with R9AP decreases significantly and RGS9-1 is phosphorylated at S(475 to a significant degree. Dim light exposure leads to quick de-phosphorylation of RGS9-1. Furthermore, after prolonged dark adaptation, RGS9-1 and transducin Gα are located in different cellular compartments. These results suggest a previously unappreciated mechanism by which prolonged dark adaptation leads to increased light sensitivity in rods by dissociating RGS9-1 from R9AP and redistributing it to rod inner segments.

Understanding and Predicting Effect of Sodium Exposure on Microstructure of Grade 91 Steel

Energy Technology Data Exchange (ETDEWEB)

Li, Meimei [Argonne National Lab. (ANL), Argonne, IL (United States); Natesan, K. [Argonne National Lab. (ANL), Argonne, IL (United States); Chen, Wei-Ying [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-08-01

This report provides an update on the understanding of the effect of sodium exposures on microstructure and tensile properties of Grade 91 (G91) steel in support of the design and operation of G91 components in sodium-cooled fast reactors (SFRs). The report is a Level 3 deliverable in FY17 (M3AT-17AN1602018), under the Work Package AT-17AN160201, “SFR Materials Testing” performed by the Argonne National Laboratory (ANL), as part of the Advanced Reactor Technologies Program.

Observations of Λc+ semileptonic decay

International Nuclear Information System (INIS)

Albrecht, H.; Ehrlichmann, H.; Hamacher, T.; Krueger, A.; Nau, A.; Nippe, A.; Reidenbach, M.; Schaefer, M.; Schroeder, H.; Schulz, H.D.; Sefkow, F.; Wurth, R.; Appuhn, R.D.; Hast, C.; Herrera, G.; Kolanoski, H.; Lange, A.; Lindner, A.; Mankel, R.; Schieber, M.; Siegmund, T.; Spaan, B.; Thurn, H.; Toepfer, D.; Walther, A.; Wegener, D.; Britton, D.I.; Charlesworth, C.E.K.; Edwards, K.W.; Kapitza, H.; Krieger, P.; Kutschke, R.; MacFarlane, D.B.; Orr, R.S.; Patel, P.M.; Prentice, J.D.; Seidel, S.C.; Tsipolitis, G.; Tzamariudaki, K.; Van de Water, R.G.; Yoon, T.S.; Ressing, D.; Schael, S.; Schubert, K.R.; Strahl, K.; Waldi, R.; Weseler, S.; Childers, R.; Darden, C.W.

1991-06-01

Direct observations of the semileptonic decay of Λ c + in the decay channels Λ c + →Λe + Χ and Λ c + →Λμ + Χ have been made using the ARGUS detector at the DORIS II e + e - storage ring. The cross section times branching ratio were found to be, σ(e + e - →Λ c + Χ).BR(Λ c + →Λe + Χ)=4.20±1.28±0.71 pb and σ(e + e - →Λ c + Χ).BR(Λ c + →Λμ + Χ)=3.91±2.02±0.90 pb. (orig.)

14 CFR 91.503 - Flying equipment and operating information.

Science.gov (United States)

2010-01-01

... Turbine-Powered Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.503 Flying equipment...) Emergency operation of fuel, hydraulic, electrical, and mechanical systems. (2) Emergency operation of...

FY17 Status Report on the Micromechanical Finite Element Modeling of Creep Fracture of Grade 91 Steel

Energy Technology Data Exchange (ETDEWEB)

Messner, M. C. [Argonne National Lab. (ANL), Argonne, IL (United States); Truster, T. J. [Univ. of Tennessee, Knoxville, TN (United States); Cochran, K. B. [DR& C Inc.; Parks, D. M. [DR& C Inc.; Sham, T. -L. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-09-01

Advanced reactors designed to operate at higher temperatures than current light water reactors require structural materials with high creep strength and creep-fatigue resistance to achieve long design lives. Grade 91 is a ferritic/martensitic steel designed for long creep life at elevated temperatures. It has been selected as a candidate material for sodium fast reactor intermediate heat exchangers and other advanced reactor structural components. This report focuses on the creep deformation and rupture life of Grade 91 steel. The time required to complete an experiment limits the availability of long-life creep data for Grade 91 and other structural materials. Design methods often extrapolate the available shorter-term experimental data to longer design lives. However, extrapolation methods tacitly assume the underlying material mechanisms causing creep for long-life/low-stress conditions are the same as the mechanisms controlling creep in the short-life/high-stress experiments. A change in mechanism for long-term creep could cause design methods based on extrapolation to be non-conservative. The goal for physically-based microstructural models is to accurately predict material response in experimentally-inaccessible regions of design space. An accurate physically-based model for creep represents all the material mechanisms that contribute to creep deformation and damage and predicts the relative influence of each mechanism, which changes with loading conditions. Ideally, the individual mechanism models adhere to the material physics and not an empirical calibration to experimental data and so the model remains predictive for a wider range of loading conditions. This report describes such a physically-based microstructural model for Grade 91 at 600° C. The model explicitly represents competing dislocation and diffusional mechanisms in both the grain bulk and grain boundaries. The model accurately recovers the available experimental creep curves at higher stresses

Brittle fracture of T91 steel in liquid lead–bismuth eutectic alloy

Energy Technology Data Exchange (ETDEWEB)

Ye, Changqing, E-mail: Changqing.ye@ed.univ-lille1.fr; Vogt, Jean-Bernard, E-mail: jean-bernard.vogt@univ-lille1.fr; Proriol-Serre, Ingrid, E-mail: ingrid.proriol-serre@univ-lille1.fr

2014-12-15

Highlights: • Tempering temperature is important for LBE embrittlement occurrence. • Brittle behaviour in LBE evidenced by small punch test and fatigue test. • Brittle behaviour in low oxygen LBE observed for low loading rate. - Abstract: The mechanical behaviour of the T91 martensitic steel has been studied in liquid lead–bismuth eutectic (LBE) and in inert atmosphere. Several conditions were considered to point out the most sensitive embrittling factors. Smooth and notched specimens were employed for respectively monotonic and cyclic loadings. The present investigation showed that T91 appeared in general as a ductile material, and became brittle in the considered conditions only if at least tests were performed in LBE. It turns out that the loading rate appeared as a critical parameter for the occurrence of liquid metal embrittlement of T91 in LBE. For the standard heat treatment condition, loading monotonically the T91 very slowly instead of rapidly in LBE resulted in brittle fracture. Also, under cyclic loading, the crack propagated in a brittle manner in LBE.

Dissolved Organic Carbon 14C in Southern Nevada Groundwater and Implications for Groundwater Travel Times

Energy Technology Data Exchange (ETDEWEB)

Hershey, Ronald L. [Nevada University, Reno, NV (United States). Desert Research Institute; Fereday, Wyall [Nevada University, Reno, NV (United States). Desert Research Institute; Thomas, James M [Nevada University, Reno, NV (United States). Desert Research Institute

2016-08-01

. Although DOC concentration decreases from recharge-area to downgradient groundwater, the organic compounds are similar, indicating that DOC ¹⁴C is unaffected by other processes such as microbial degradation. A small amount of organic carbon was leached from crushed volcanic and carbonate aquifer outcrop rock in rock-leaching experiments. The leached DOC was high in ¹⁴C (75 pmc carbonate rocks, 91 pmc volcanic) suggesting that the leached DOC likely came from microbes in the rock samples. The small amount of DOC and high ¹⁴C indicates that the amount of old organic carbon in these rocks is low so there should be minimal impact on groundwater DOC ¹⁴C ages. Based on the results from this study, DOC ¹⁴C ages do not require additional corrections. Several correction models were applied to DIC ¹⁴C ages to correct for water-rock reactions along two carbonate and two volcanic flow paths and the corresponding travel times were compare to DOC ¹⁴C travel times. The DOC ¹⁴C travel times were hundreds to thousands of years shorter than uncorrected and corrected DIC ¹⁴C travel times except for the upper section of one carbonate flow path. DOC ¹⁴C travel times ranged from 400 to 5,400 years as compared to DIC ¹⁴C that ranged from modern to 20,900 years. The DIC ¹⁴C ages are greatly influenced by carbonate mineral and gas reactions and other processes such as matrix diffusion, isotope exchange, or adsorption, which are not always adequately accounted for in DIC ¹⁴C groundwater age correction models.

C-Reactive Protein Levels in the Brugada Syndrome

Directory of Open Access Journals (Sweden)

Aimé Bonny

2011-01-01

Full Text Available Background. Inflammation in the Brugada syndrome (BrS and its clinical implication have been little studied. Aims. To assess the level of inflammation in BrS patients. Methods. All studied BrS patients underwent blood samples drawn for C-reactive protein (CRP levels at admission, prior to any invasive intervention. Patients with a previous ICD placement were controlled to exclude those with a recent (<14 days shock. We divided subjects into symptomatic (syncope or aborted sudden death and asymptomatic groups. In a multivariable analysis, we adjusted for significant variables (age, CRP ≥ 2 mg/L. Results. Fifty-four subjects were studied (mean age 45 ± 13 years, 49 (91% male. Twenty (37% were symptomatic. Baseline characteristics were similar in both groups. Mean CRP level was 1,4 ± 0,9 mg/L in asymptomatic and 2,4 ± 1,4 mg/L in symptomatic groups (P = .003. In the multivariate model, CRP concentrations ≥ 2 mg/L remained an independent marker for being symptomatic (P = .018; 95% CI: 1.3 to 19.3. Conclusion. Inflammation seems to be more active in symptomatic BrS. C-reactive protein concentrations ≥ 2 mg/L might be associated with the previous symptoms in BrS. The value of inflammation as a risk factor of arrhythmic events in BrS needs to be studied.

Effect of rare earth elements on high cycle fatigue behavior of AZ91 alloy

International Nuclear Information System (INIS)

Mokhtarishirazabad, M.; Boutorabi, S.M.A.; Azadi, M.; Nikravan, M.

2013-01-01

This article investigates effects of adding rare earth elements (RE) into a magnesium–aluminum–zinc alloy (the AZ91 alloy) on its high cycle fatigue (HCF) behavior. For this purpose, AZ91 and AZ91+1% RE (AZE911) alloys were gravity casted in a metallic die. RE elements were added to the AZ91 alloy in the form of mischmetals. Microscopic evaluations with the scanning electron microscopy (SEM) and mechanical tests include tensile, hardness and HCF behaviors, were performed on prepared samples. Rotary bending fatigue tests were carried out at a stress ratio (R) of −1 and a frequency of 125 Hz, at the room temperature, in the air. The microscopic investigation demonstrates that the addition of 1% RE elements leads to the formation of Al 11 RE 3 intermetallic particles which is associated to the reduction of β-(Mg 17 Al 12 ) phases. Results of mechanical experiments suggest a negligible effect of adding 1% RE elements on mechanical properties of the AZ91 alloy. Curves of stress-life (S–N) shows an increase in the fatigue strength at 10 5 cycles, from 100±10 MPa to 135±10 MPa, when RE elements were added to the AZ91 alloy

Effect of rare earth elements on high cycle fatigue behavior of AZ91 alloy

Energy Technology Data Exchange (ETDEWEB)

Mokhtarishirazabad, M., E-mail: mehdi-mokhtari@hotmail.com [School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Boutorabi, S.M.A. [School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Tehran (Iran, Islamic Republic of); Azadi, M.; Nikravan, M. [Irankhodro Powertrain Company (IPCO), Tehran (Iran, Islamic Republic of)

2013-12-10

This article investigates effects of adding rare earth elements (RE) into a magnesium–aluminum–zinc alloy (the AZ91 alloy) on its high cycle fatigue (HCF) behavior. For this purpose, AZ91 and AZ91+1% RE (AZE911) alloys were gravity casted in a metallic die. RE elements were added to the AZ91 alloy in the form of mischmetals. Microscopic evaluations with the scanning electron microscopy (SEM) and mechanical tests include tensile, hardness and HCF behaviors, were performed on prepared samples. Rotary bending fatigue tests were carried out at a stress ratio (R) of −1 and a frequency of 125 Hz, at the room temperature, in the air. The microscopic investigation demonstrates that the addition of 1% RE elements leads to the formation of Al{sub 11}RE{sub 3} intermetallic particles which is associated to the reduction of β-(Mg{sub 17}Al{sub 12}) phases. Results of mechanical experiments suggest a negligible effect of adding 1% RE elements on mechanical properties of the AZ91 alloy. Curves of stress-life (S–N) shows an increase in the fatigue strength at 10{sup 5} cycles, from 100±10 MPa to 135±10 MPa, when RE elements were added to the AZ91 alloy.

32 CFR Appendix C to Part 45 - DD Form 215

Science.gov (United States)

2010-07-01

... 32 National Defense 1 2010-07-01 2010-07-01 false DD Form 215 C Appendix C to Part 45 National... CERTIFICATE OF RELEASE OR DISCHARGE FROM ACTIVE DUTY (DD FORM 214/5 SERIES) Pt. 45, App. C Appendix C to Part 45—DD Form 215 EC21OC91.050 ...

STRING v9.1

DEFF Research Database (Denmark)

Franceschini, A.; Simonovic, M.; Roth, A.

2013-01-01

for certain model organisms and functional systems. Currently, protein interactions and associations are annotated at various levels of detail in online resources, ranging from raw data repositories to highly formalized pathway databases. For many applications, a global view of all the available interaction...... data is desirable, including lower-quality data and/or computational predictions. The STRING database (http://string-db.org/) aims to provide such a global perspective for as many organisms as feasible. Known and predicted associations are scored and integrated, resulting in comprehensive protein...... networks covering >1100 organisms. Here, we describe the update to version 9.1 of STRING, introducing several improvements: (i) we extend the automated mining of scientific texts for interaction information, to now also include full-text articles; (ii) we entirely re-designed the algorithm for transferring...

48 CFR 1426.7102 - Minority Business Development Agency (MBDA-91) Plan and Reports.

Science.gov (United States)

2010-10-01

... Reports 1426.7102 Minority Business Development Agency (MBDA-91) Plan and Reports. ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Minority Business Development Agency (MBDA-91) Plan and Reports. 1426.7102 Section 1426.7102 Federal Acquisition Regulations...

An odor-specific threshold deficit implicates abnormal cAMP signaling in youths at clinical risk for psychosis.

Science.gov (United States)

Kamath, Vidyulata; Moberg, Paul J; Calkins, Monica E; Borgmann-Winter, Karin; Conroy, Catherine G; Gur, Raquel E; Kohler, Christian G; Turetsky, Bruce I

2012-07-01

While olfactory deficits have been reported in schizophrenia and youths at-risk for psychosis, few studies have linked these deficits to current pathophysiological models of the illness. There is evidence that disrupted cyclic adenosine 3',5'-monophosphate (cAMP) signaling may contribute to schizophrenia pathology. As cAMP mediates olfactory signal transduction, the degree to which this disruption could manifest in olfactory impairment was ascertained. Odor-detection thresholds to two odorants that differ in the degree to which they activate intracellular cAMP were assessed in clinical risk and low-risk participants. Birhinal assessments of odor-detection threshold sensitivity to lyral and citralva were acquired in youths experiencing prodromal symptoms (n=17) and controls at low risk for developing psychosis (n=15). Citralva and lyral are odorants that differ in cAMP activation; citralva is a strong cAMP activator and lyral is a weak cAMP activator. The overall group-by-odor interaction was statistically significant. At-risk youths showed significantly reduced odor detection thresholds for lyral, but showed intact detection thresholds for citralva. This odor-specific threshold deficit was uncorrelated with deficits in odor identification or discrimination, which were also present. ROC curve analysis revealed that olfactory performance correctly classified at-risk and low-risk youths with greater than 97% accuracy. This study extends prior findings of an odor-specific hyposmia implicating cAMP-mediated signal transduction in schizophrenia and unaffected first-degree relatives to include youths at clinical risk for developing the disorder. These results suggest that dysregulation of cAMP signaling may be present during the psychosis prodrome. Copyright © 2012 Elsevier B.V. All rights reserved.

14 CFR 91.527 - Operating in icing conditions.

Science.gov (United States)

2010-01-01

... Aviation Regulation No. 23, or those for transport category airplane type certification, no pilot may fly... for transport category airplane type certification, no pilot may fly an airplane into known or...-Powered Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.527 Operating in icing...

The devil we know: the implications of bill C-38 for assisted human reproduction in Canada.

Science.gov (United States)

Cattapan, Alana; Cohen, Sara R

2013-07-01

In June 2012, the Canadian House of Commons passed the so-called omnibus budget bill, making several important changes to the governance of assisted reproduction in Canada. The bill (Bill C-38) was widely criticized for its unwieldy size and rapid passage through Parliament, preventing adequate parliamentary debate and public scrutiny. Given the substantive nature of the amendments to the Assisted Human Reproduction Act made by Bill C-38, and the lack of relevant discussion about these changes both before and following its passage, this commentary is intended to identify how Bill C-38 may alter the governance of reproductive technologies in Canada. In this commentary, we address some of the more significant changes made by Bill C-38 to the regulation of reproductive medicine in Canada. We identify the benefits and challenges of closing Assisted Human Reproduction Canada, noting that doing so eliminates a much-needed forum for stakeholder consultation in this field. Further, we explore the implications of moving the regulation of donor semen from the Food and Drugs Act to the Assisted Human Reproduction Act; these include increased liability for physicians, and opportunities to expand the existing regulations to account for the needs of lesbian, gay, bisexual, trans, and queer Canadians using donor gametes and recent advances in reproductive technologies. Overall, we argue that although the implementation of a policy framework in this field remains highly dependent on yet-to-be written regulations, the changes to the Assisted Human Reproduction Act enabled by Bill C-38 may significantly alter how Canadians interact with reproductive technologies.

14 CFR 91.1013 - Operational control briefing and acknowledgment.

Science.gov (United States)

2010-01-01

... Ownership Operations Operational Control § 91.1013 Operational control briefing and acknowledgment. (a) Upon...) Liability risk in the event of a flight-related occurrence that causes personal injury or property damage...

New and revised 14C dates for Hawaiian surface lava flows: Paleomagnetic and geomagnetic implications

Science.gov (United States)

Pressline, N.; Trusdell, F.A.; Gubbins, David

2009-01-01

Radiocarbon dates have been obtained for 30 charcoal samples corresponding to 27 surface lava flows from the Mauna Loa and Kilauea volcanoes on the Island of Hawaii. The submitted charcoal was a mixture of fresh and archived material. Preparation and analysis was undertaken at the NERC Radiocarbon Laboratory in Glasgow, Scotland, and the associated SUERC Accelerator Mass Spectrometry facility. The resulting dates range from 390 years B.P. to 12,910 years B.P. with corresponding error bars an order of magnitude smaller than previously obtained using the gas-counting method. The new and revised 14C data set can aid hazard and risk assessment on the island. The data presented here also have implications for geomagnetic modelling, which at present is limited by large dating errors. Copyright 2009 by the American Geophysical Union.

7 CFR 91.44 - Charges on overdue accounts and issuance of delinquency notices.

Science.gov (United States)

2010-01-01

... delinquency notices. 91.44 Section 91.44 Agriculture Regulations of the Department of Agriculture (Continued... Charges on overdue accounts and issuance of delinquency notices. (a) Accounts are considered overdue if... laboratory service will not be performed for any applicant with a notice of delinquency. (d) Applicants with...

Crack Growth Rate Properties of Gr.91 Steel for a Defect Assessment of a Component in a Sodium-cooled Fast Reactor

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyeong-Yeon; Kim, Woo-Gon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-05-15

In this study, the crack growth models were derived from a number of crack growth tests for Gr.91 steel specimens under fatigue loading and creep loading at elevated temperature. The test data from the experiments of fatigue crack growth (FCG) and creep crack growth (CCG) were obtained, and the test data were compared with those of the RCC-MRx to investigate conservatism of the crack growth models in RCC-MRx. It was shown that the FCG rate model of RCC-MRx was conservative while the CCG model was non-conservative for Gr.91 steel when compared with present test data. The FCG rate tests were conducted with round bar type single edge crack tension specimens, and standard C(T) specimens with a 12.7mm thickness. The FCG test results were compared with those of the FCG rate models of RCC-MRx that are based on 25.4mm thick C(T) specimens. It was shown that the FCG rate model of RCC-MRx was conservative when compared to the present test data. The CCG rate models were derived from the test data for standard C(T) specimens with 12.7mm thickness. The data were compared with those of the RCC-MRx that are based on 25.4mm thick C(T) specimens. Conservatism of the crack growth models in 2012 edition of the RCC-MRx code was reviewed with the present CCG test data.

Fatigue life of the casting-magnesium alloy AZ91

International Nuclear Information System (INIS)

Eisenmeier, G.; Mughrabi, H.; Holzwarth, B.; Hoeppel, H.W.; Ding, H.Z.

2000-01-01

The cyclic deformation behaviour of the die-casting magnesium alloy AZ91 was investigated at constant total strain amplitudes between 1.4 x 10 -3 and 2 x 10 -2 at room temperature (20 C) and at 130 C. At low total strain amplitudes, a weak cyclic softening at the beginning of the fatigue tests is followed by cyclic hardening, whereas at high total strain amplitudes a strong cyclic hardening occurs throughout. The fatigue lives at 130 C are slightly longer at high strain amplitudes but shorter at low strain amplitudes than at room temperature. The fatigue life data for both temperatures can be described well by the laws of Manson-Coffin and Basquin. The microstructural investigations performed show the strong influence of several microstructural features on the initiation and propagation of fatigue cracks. In order to understand the fatigue crack propagation behaviour, fatigue tests were interrupted at certain numbers of cycles in order to make replicas of the surface of the samples. It could be verified that crack propagation occurs mainly by the coalescence of smaller cracks. Furthermore, unloading tests, performed within a closed cycle, were carried out in order to capture the changes of stiffness (compliance) during a closed cycle with the aim to ascertain the damage evolution occurring during the fatigue tests and to determine the stresses at which the cracks open and close. Finally, two-step fatigue tests were carried out with the objective to quantify deviations from the linear damage rule (LDR) of Palmgren and Miner. The results obtained in this study will be used to formulate a microstructurally based life-prediction concept for single-step as well as for two-step fatigue loading. (orig.)

Bm91 is an envelope component of ODV but is dispensable for the propagation of Bombyx mori nucleopolyhedrovirus.

Science.gov (United States)

Tang, Qi; Li, Guohui; Yao, Qin; Chen, Liang; Lv, Peng; Lian, Chaoqun; Chen, Keping

2013-05-01

Orf91 (Bm91) of Bombyx mori nucleopolyhedrovirus (BmNPV) is a highly conserved gene that encodes a predicted 105-amino-acid protein, but its function remains unknown. In the current study, 5'-RACE revealed that the transcription initiation site of Bm91 was - 12 nucleotides upstream of the start codon ATG, transcription of Bm91 was detected from 12 to 96 h postinfection (p.i.) and Bm91 protein was detected from 24 to 96 h p.i. in BmNPV-infected BmN cells. Furthermore, Western blot analysis revealed that Bm91 was in occlusion-derived virus (ODV) but not in budded virus (BV). To investigate the role of Bm91 in baculovirus life cycle, a Bm91-knockout virus was constructed by bacmid recombination in E. coli. Fluorescence and light microscopy showed that the production of BV and occlusion bodies (OBs) in Bm91-deficient-virus-infected BmN cells were similar to those in wild-type-virus-infected ones. Bioassay results showed that genetic deletion of Bm91 did not significantly affect BmNPV infectivity, but extended the median lethal time (LT50). Taken together, these results indicate that Bm91 is not essential for viral propagation in vitro, but absence of the gene may affect the virulence of ODVs in silkworm larvae. Copyright © 2013 Elsevier Inc. All rights reserved.

Corrosion and mechanical performance of AZ91 exposed to simulated inflammatory conditions.

Science.gov (United States)

Brooks, Emily K; Der, Stephanie; Ehrensberger, Mark T

2016-03-01

Magnesium (Mg) and its alloys, including Mg-9%Al-1%Zn (AZ91), are biodegradable metals with potential use as temporary orthopedic implants. Invasive orthopedic procedures can provoke an inflammatory response that produces hydrogen peroxide (H2O2) and an acidic environment near the implant. This study assessed the influence of inflammation on both the corrosion and mechanical properties of AZ91. The AZ91 samples in the inflammatory protocol were immersed for three days in a complex biologically relevant electrolyte (AMEM culture media) that contained serum proteins (FBS), 150 mM of H2O2, and was titrated to a pH of 5. The control protocol immersed AZ91 samples in the same biologically relevant electrolyte (AMEM & FBS) but without H2O2 and the acid titration. After 3 days all samples were switched into fresh AMEM & FBS for an additional 3-day immersion. During the initial immersion, inflammatory protocol samples showed increased corrosion rate determined by mass loss testing, increased Mg and Al ion released to solution, and a completely corroded surface morphology as compared to the control protocol. Although corrosion in both protocols slowed once the test electrolyte solution was replaced at 3 days, the samples originally exposed to the simulated inflammatory conditions continued to display enhanced corrosion rates as compared to the control protocol. These lingering effects may indicate the initial inflammatory corrosion processes modified components of the surface oxide and corrosion film or initiated aggressive localized processes that subsequently left the interface more vulnerable to continued enhanced corrosion. The electrochemical properties of the interfaces were also evaluated by EIS, which found that the corrosion characteristics of the AZ91 samples were potentially influenced by the role of intermediate adsorption layer processes. The increased corrosion observed for the inflammatory protocol did not affect the flexural mechanical properties of the AZ91

Damage characterization of an ASTM A 213 grade 91 tube after 116.000 h of service in a reforming plant

International Nuclear Information System (INIS)

Tonti, Andrea; Lega, Daniela; Antonini, Alessandra; Romitelli, Manuela; Alvino, Antonello

2015-01-01

ASTM A213 T91 steel is used in power plants and petrochemical industry, for long-term service components. The improved mechanical properties of grade 91 are strictly related to its specific microstructure: a tempered martensite matrix with fine precipitates embedded in. Despite low alloy heat resistant ferritic steels, that have a well known operational experience, T91 service performances are still faintly consolidated, because this material has serviced only in a limited number of plants, since the eighties. Most of the available data were obtained by laboratory tests on relatively short term creep strength and corrosion properties. The investigations reported in this paper represent an important opportunity to describe and better evaluate the damage evolution of the grade T91 steel after more than 100000 h of exposure in severe conditions (580 °C, 18–26 bar, combustion environment). Our results suggest that the steel suffered by different damage forms, which appear on definite portions of the tube cross section. The main degradation forms observed, in fact, into the tube bulk are both the martensite recovery and the microstructural evolution. This latter promoted mostly Laves phase precipitation and coarsening. On the other hand, both the outer and the inner wall side, suffered mainly by severe oxidation/carburization. Especially on the outer surface, the massive carbide precipitation has caused an evident loss of ductility so that the mechanical properties of the tube appear appreciably reduced. - Highlights: • ASTM A213 T91 steel is used in petrochemical industry, for long-term service components. • The investigations reported an evaluation of the damage evolution of the grade T91 steel. • Our results suggest that the steel suffered both the martensite recovery and the microstructural evolution. • The outer and the inner wall side, suffered mainly by severe oxidation/carburization. • Carbide precipitation caused loss of ductility so that the

Up-regulation of 91H promotes tumor metastasis and predicts poor prognosis for patients with colorectal cancer.

Directory of Open Access Journals (Sweden)

Qiwen Deng

Full Text Available Long noncoding RNAs (lncRNAs play widespread roles in gene regulation and cellular processes. However, the functional roles of lncRNAs in colorectal cancer (CRC are not yet well elucidated. The aim of the present study was to measure the levels of lncRNA 91H expression in CRC and evaluate its clinical significance and biological roles in the development and progression of CRC.91H expression and copy number variation (CNV were measured in 72 CRC tumor tissues and adjacent normal tissues by real-time PCR. The biological roles of 91H were evaluated by MTT, scratch wound assay, migration and invasion assays, and flow cytometry.91H was significantly overexpressed in cancerous tissue and CRC cell lines compared with adjacent normal tissue and a normal human intestinal epithelial cell line. Moreover, 91H overexpression was closely associated with distant metastasis and poor prognosis in patients with CRC, except for CNV of 91H. Multivariate analysis indicated that 91H expression was an independent prognostic indicator, as well as distant metastasis. Our in vitro data indicated that knockdown of 91H inhibited the proliferation, migration, and invasiveness of CRC cells.91H played an important role in the molecular etiology of CRC and might be regarded as a novel prognosis indicator in patients with CRC.

Structural implications of the C-terminal tail in the catalytic and stability properties of manganese peroxidases from ligninolytic fungi

Energy Technology Data Exchange (ETDEWEB)

Fernández-Fueyo, Elena [CSIC, Ramiro de Maeztu 9, 28040 Madrid (Spain); Acebes, Sandra [Barcelona Supercomputing Center, Jordi Girona 29, 08034 Barcelona (Spain); Ruiz-Dueñas, Francisco J.; Martínez, María Jesús; Romero, Antonio; Medrano, Francisco Javier, E-mail: fjmedrano@cib.csic.es [CSIC, Ramiro de Maeztu 9, 28040 Madrid (Spain); Guallar, Victor, E-mail: fjmedrano@cib.csic.es [Barcelona Supercomputing Center, Jordi Girona 29, 08034 Barcelona (Spain); ICREA, Passeig Lluís Companys 23, 08010 Barcelona (Spain); Martínez, Angel T., E-mail: fjmedrano@cib.csic.es [CSIC, Ramiro de Maeztu 9, 28040 Madrid (Spain)

2014-12-01

The variable C-terminal tail of manganese peroxidases, a group of enzymes involved in lignin degradation, is implicated in their catalytic and stability properties, as shown by new crystal structures, molecular-simulation and directed-mutagenesis data. Based on this structural–functional evaluation, short and long/extralong manganese peroxidase subfamilies have been accepted; the latter are characterized by exceptional stability, while it is shown for the first time that the former are able to oxidize other substrates at the same site where manganese(II) is oxidized. The genome of Ceriporiopsis subvermispora includes 13 manganese peroxidase (MnP) genes representative of the three subfamilies described in ligninolytic fungi, which share an Mn{sup 2+}-oxidation site and have varying lengths of the C-terminal tail. Short, long and extralong MnPs were heterologously expressed and biochemically characterized, and the first structure of an extralong MnP was solved. Its C-terminal tail surrounds the haem-propionate access channel, contributing to Mn{sup 2+} oxidation by the internal propionate, but prevents the oxidation of 2, 2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS), which is only oxidized by short MnPs and by shortened-tail variants from site-directed mutagenesis. The tail, which is anchored by numerous contacts, not only affects the catalytic properties of long/extralong MnPs but is also associated with their high acidic stability. Cd{sup 2+} binds at the Mn{sup 2+}-oxidation site and competitively inhibits oxidation of both Mn{sup 2+} and ABTS. Moreover, mutations blocking the haem-propionate channel prevent substrate oxidation. This agrees with molecular simulations that position ABTS at an electron-transfer distance from the haem propionates of an in silico shortened-tail form, while it cannot reach this position in the extralong MnP crystal structure. Only small differences exist between the long and the extralong MnPs, which do not justify their

Improving the corrosion resistance of AZ91D magnesium alloy through reinforcement with titanium carbides and borides

Directory of Open Access Journals (Sweden)

Mohamed Gobara

2015-06-01

Full Text Available A composite consisting of magnesium matrix reinforced with a network of TiC–Ti2AlC–TiB2 particulates has been fabricated using a practical in-situ reactive infiltration technique. The microstructural and phase composition of the magnesium matrix composite (R-Mg was investigated using SEM/EDS and XRD. The analyses revealed the complete formation of TiC, Ti2AlC and TiB2 particles in the magnesium matrix. Comparative compression tests of R-Mg and AZ91D alloy showed that the reinforcing particles improve the mechanical properties of Mg alloy. EIS and potentiodynamic polarization results indicated that the reinforcing particles significantly improve the corrosion resistance of the reinforced alloy in 3.5% NaCl solution.

CYCLIC FATIGUE RESISTANCE OF AZ91 MAGNESIUM ALLOY

Directory of Open Access Journals (Sweden)

Aneta Němcová

2009-11-01

Full Text Available The paper deals with determination of principal mechanical properties and the investigation of fatigue behaviour of AZ91 magnesium alloy. The experimental material was made by squeeze casting technique and heat treated to obtain T4 state (solution annealing, when hard, brittle Mg17Al12 intermetallic phase is dissolved. The basic mechanical properties (Young’s modulus, ultimate tensile strength, yield strength, elongation to fracture and reduction of area were determined by static tensile test. Furthermore, fatigue parameters were investigated. The S-N curve on the basis of smooth test bars tested under symmetrical push-pull loading at room temperature was evaluated. The measured data were subsequently used for fitting with suitable regression functions (Kohout & Věchet and Stromeyer for determination of the fatigue parameters. Fatigue limit sigma-c of the studied alloy for 108 cycles is approaching 50 MPa. In addition, the fracture surfaces were observed by scanning electron microscopy. The failure analysis proved that the striations were observed in fatigue crack propagation area and in the area of static fracture was observed the transgranular ductile fracture. The structure of the studied alloy in the basic state and after heat treatment was observed by light and scanning electron microscopy.

Influence of LBE long term exposure and simultaneous fast neutron irradiation on the mechanical properties of T91 and 316L

Energy Technology Data Exchange (ETDEWEB)

Stergar, E., E-mail: estergar@sckcen.be [SCK-CEN, Belgian Nuclear Research Centre, Boeretang 200, 2400 Mol (Belgium); Eremin, S.G. [RIAR, Research Institute of Atomic Reactors, Dimitrovgrad (Russian Federation); Gavrilov, S.; Lambrecht, M. [SCK-CEN, Belgian Nuclear Research Centre, Boeretang 200, 2400 Mol (Belgium); Makarov, O.; Iakovlev, V. [RIAR, Research Institute of Atomic Reactors, Dimitrovgrad (Russian Federation)

2016-05-15

The LEXUR–II–LBE irradiation campaign was conducted from 2011 to 2012 and was aimed to investigate the combined influence of irradiation and LBE environment. In this irradiation campaign tensile test samples, pressurized tubes and corrosion samples were irradiated in LBE filled capsules. To separate the effect of exposure to LBE and neutron irradiation a parallel furnace experiment where the samples were exposed to LBE at the irradiation temperature for the corresponding time was conducted. Here we report results of the first extracted capsule which was irradiated about 6 months and dismantled after a cooling phase to decrease activity. The results of SSRT tests for irradiated T91 show that the exposure to LBE at 350 °C for a long time leads to the appearance of liquid metal embrittlement without any pre-treatment which is usually necessary to promote LME. Irradiation increases the effect of LME on the ductility of T91. In contrast to the findings for T91 the gained results also show that tensile tests on irradiated austenitic stainless steel 316L show no influence of LBE environment on the tensile properties.

The spatial distribution of C3 and C4 grasses in North America through the next century

Science.gov (United States)

Cotton, J. M.; Mosier, T. M.; Cerling, T. E.; Ehleringer, J. R.; Hoppe, K. A.; Still, C. J.

2014-12-01

C4 grasses currently cover ~18% of the earth's surface and are economically important as food sources, but their distributions are likely to change with future climate changes. As a result of the opposing impacts of atmospheric CO2 and temperature on C3 and C4 physiology, future changes to the productivity and distributions of these grasses have remained unclear. We have used past and present tooth enamel, collagen, and bone carbon isotope ratios (δ13C) of Bison and Mammoth grazers to record the δ13C values of their diet, and the abundance of C3 and C4 vegetation in these habitats. Thus, the δ13C values of bison and mammoth tissues serve as a proxy for vegetation composition across North America through time. We combine these isotope data with ensemble CMIP5 climate model outputs, eight different climatic and fire predictor variables and advanced statistical techniques to model the spatial distribution of C3 and C4 grasses up through the year 2100 for two different emissions scenarios. Using the Random Forest algorithm, our model explains 91% of the spatial and temporal isotopic variability in bison and mammoth tissues and infers that mean summer temperature is the strongest predictor of all climate variables. For the emission scenario RCP4.5, in which atmospheric CO2 levels are predicted to rise to ~540 ppm by 2100, we find decreases in the abundance of C4 grasses of up to 30% in the south-central Great Plains and the Florida peninsula, and increases of up to 50% in the northern Great Plains. For the RCP8.5 scenario, in which atmospheric CO2 levels are expected to rise to ~930 ppm by 2100, our model predicts minor decreases in the abundance of C4 grasses in Texas and Oklahoma, but increases of 30-50% over the majority of the Great Plains. The overall effect of these changes is a homogenization of the Great Plains ecoregion in terms of grassland type distributions, and the loss of the highest abundance of C4 ecosystems of the panhandles of Texas, Oklahoma and

FY17 Status Report on Testing Supporting the Inclusion of Grade 91 Steel as an Acceptable Material for Application of the EPP Methodology

Energy Technology Data Exchange (ETDEWEB)

Messner, Mark C. [Argonne National Lab. (ANL), Argonne, IL (United States); Sham, Sam [Argonne National Lab. (ANL), Argonne, IL (United States); Wang, Yanli [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2017-08-01

This report summarizes the experiments performed in FY17 on Gr. 91 steels. The testing of Gr. 91 has technical significance because, currently, it is the only approved material for Class A construction that is strongly cyclic softening. Specific FY17 testing includes the following activities for Gr. 91 steel. First, two types of key feature testing have been initiated, including two-bar thermal ratcheting and Simplified Model Testing (SMT). The goal is to qualify the Elastic – Perfectly Plastic (EPP) design methodologies and to support incorporation of these rules for Gr. 91 into the ASME Division 5 Code. The preliminary SMT test results show that Gr. 91 is most damaging when tested with compression hold mode under the SMT creep fatigue testing condition. Two-bar thermal ratcheting test results at a temperature range between 350 to 650o C were compared with the EPP strain limits code case evaluation, and the results show that the EPP strain limits code case is conservative. The material information obtained from these key feature tests can also be used to verify its material model. Second, to provide experimental data in support of the viscoplastic material model development at Argonne National Laboratory, selective tests were performed to evaluate the effect of cyclic softening on strain rate sensitivity and creep rates. The results show the prior cyclic loading history decreases the strain rate sensitivity and increases creep rates. In addition, isothermal cyclic stress-strain curves were generated at six different temperatures, and a nonisothermal thermomechanical testing was also performed to provide data to calibrate the viscoplastic material model.

Spontaneous autoimmunity in 129 and C57BL/6 mice-implications for autoimmunity described in gene-targeted mice.

Directory of Open Access Journals (Sweden)

Anne E Bygrave

2004-08-01

Full Text Available Systemic lupus erythematosus (SLE is a multisystem autoimmune disorder in which complex genetic factors play an important role. Several strains of gene-targeted mice have been reported to develop SLE, implicating the null genes in the causation of disease. However, hybrid strains between 129 and C57BL/6 mice, widely used in the generation of gene-targeted mice, develop spontaneous autoimmunity. Furthermore, the genetic background markedly influences the autoimmune phenotype of SLE in gene-targeted mice. This suggests an important role in the expression of autoimmunity of as-yet-uncharacterised background genes originating from these parental mouse strains. Using genome-wide linkage analysis, we identified several susceptibility loci, derived from 129 and C57BL/6 mice, mapped in the lupus-prone hybrid (129 x C57BL/6 model. By creating a C57BL/6 congenic strain carrying a 129-derived Chromosome 1 segment, we found that this 129 interval was sufficient to mediate the loss of tolerance to nuclear antigens, which had previously been attributed to a disrupted gene. These results demonstrate important epistatic modifiers of autoimmunity in 129 and C57BL/6 mouse strains, widely used in gene targeting. These background gene influences may account for some, or even all, of the autoimmune traits described in some gene-targeted models of SLE.

Prostaglandin E2 stimulates normal bronchial epithelial cell growth through induction of c-Jun and PDK1, a kinase implicated in oncogenesis.

Science.gov (United States)

Fan, Yu; Wang, Ye; Wang, Ke

2015-12-18

Cyclooxygenase-2-derived prostaglandin E2 (PGE2), a bioactive eicosanoid, has been implicated in many biological processes including reproduction, inflammation and tumor growth. We previously showed that PGE2 stimulated lung cancer cell growth and progression through PGE2 receptor EP2/EP4-mediated kinase signaling pathways. However, the role of PGE2 in controlling lung airway epithelial cell phenotype remains unknown. We evaluated the effects of c-Jun and 3-phosphoinositede dependent protein kinase-1 (PDK1) in mediating epithelial cell hyperplasia induced by PGE2. The bronchial epithelial cell lines BEAS-2B and HBEc14-KT were cultured and then treated with PGE2. PDK1 small interfering RNA (siRNA) and a PDK1 inhibitor, an antagonist of the PGE2 receptor subtype EP4 and EP4 siRNA, c-Jun siRNA, and overexpressions of c-Jun and PDK1 have been used to evaluate the effects on cell proliferation. We demonstrated that PGE2 increased normal bronchial epithelial cell proliferation through induction of PDK1, an ankyrin repeat-containing Ser/Thr kinase implicated in the induction of apoptosis and the suppression of tumor growth. PDK1 siRNA and a PDK1 inhibitor blocked the effects of PGE2 on normal cell growth. The PGE2-induced PDK1 expression was blocked by an antagonist of the PGE2 receptor subtype EP4 and by EP4 siRNA. In addition, we showed that induction of PDK1 by PGE2 was associated with induction of the transcription factor, c-Jun protein. Silencing of c-Jun using siRNA and point mutations of c-Jun sites in the PDK1 gene promoter resulted in blockade of PDK1 expression and promoter activity induced by PGE2. In contrast, overexpression of c-Jun induced PDK1 gene promoter activity and expression followed increased cell proliferation. PGE2 increases normal bronchial epithelial cell proliferation through increased PDK1 gene expression that is dependent on EP4 and induction of c-Jun. Therewith, our data suggest a new role of c-Jun and PDK1 in mediating epithelial cell

Intermittency at 91 GeV in the reaction e+e- → hadrons

International Nuclear Information System (INIS)

Raab, V.

1992-07-01

This thesis deals with events of the kind e + e - → hadrons at an c. m. energy of about 91.25 GeV. By means of factorial moments thereby the processes are analyzed on parton and on hadron level as well as the fragmentation, i.e. the transition from partons into hadrons. The analysis method is studied on perturbing influences by the shape of inclusive distributions, cuts, and choice of the coordinate system. It is then extended by many-dimensional procedures and a variable transformation. The importance of the Dalitz decay in many-dimensional analyses is shown. The studies deal intensively with the processes on the parton level. Two different procedures lead to the agreeing result that a many-stage cascade of quarks and gluons leads to the main contributions of the fractal structures. (orig.) [de

A Comparative Electrochemical Study of AZ31 and AZ91 Magnesium Alloy

Directory of Open Access Journals (Sweden)

S. A. Salman

2010-01-01

Full Text Available A comparative study has been carried out on AZ31 and AZ91 magnesium alloys in order to understand the electrochemical behavior in both alkaline and chloride containing solutions. The open circuit potential (OCP was examined in 1 M NaOH and 3.5 mass % NaCl solutions. AZ31 magnesium alloy shows several potential drops throughout the immersion in 1 M NaOH solution, though AZ91 does not show this phenomenon. The specimens were anodized at a constant potential of 3 V for 30 minutes at 298 K in 1 M NaOH solution. The anticorrosion behavior of the anodized specimens was better than those of nonanodized specimens. The anodized AZ91 has better corrosion resistance compared to nonanodized specimen and anodized AZ31 magnesium alloy.

40 CFR 91.306 - Dynamometer torque cell calibration.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Dynamometer torque cell calibration... Provisions § 91.306 Dynamometer torque cell calibration. (a)(1) Any lever arm used to convert a weight or a force through a distance into a torque must be used in a horizontal position for horizontal shaft...

14 CFR 91.13 - Careless or reckless operation.

Science.gov (United States)

2010-01-01

... (CONTINUED) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES General § 91.13... operate an aircraft in a careless or reckless manner so as to endanger the life or property of another. (b...), in a careless or reckless manner so as to endanger the life or property of another. ...

18 CFR 3a.91 - Data index system.

Science.gov (United States)

2010-04-01

... 18 Conservation of Power and Water Resources 1 2010-04-01 2010-04-01 false Data index system. 3a..., DEPARTMENT OF ENERGY GENERAL RULES NATIONAL SECURITY INFORMATION Data Index System § 3a.91 Data index system. A data index system shall be established for Top Secret, Secret, and Confidential information in...

Toxicity of inhaled 91YCl3 in beagle dogs

International Nuclear Information System (INIS)

Hahn, F.F.; Muggenburg, B.A.; Boecker, B.B.; Jones, R.K.; McClellan, R.O.; Pickrell, J.A.

1980-01-01

The metabolism, dosimetry and effects of inhaled 91 YCl 3 in beagle dogs are being studied. Forty-two dogs with 91 Y initial body burdens from 14 to 1300 μCi/kg body weight and 12 control dogs are being maintained for lifetime observation. Four additional dogs with a mean initial body burden of 180 μCi/kg body weight were placed in a sacrifice study. Thirty-six of the exposed dogs and 7 of the control dogs have died. Dogs with the highest activity levels died with bone marrow damage and pancytopenia. Three dogs died with nasal cavity carcinomas and three with pulmonary carcinomas and one with hepatic hemangiosarcoma that all appear related to radiation injury. Control dogs died of miscellaneous neoplastic and chronic diseases. Observations are continuing on 10 surviving exposed dogs and six surviving unexposed dogs

About some corrosion mechanisms of AZ91D magnesium alloy

International Nuclear Information System (INIS)

Ballerini, Gaia; Bardi, Ugo; Bignucolo, Roberto; Ceraolo, Giuseppe

2005-01-01

The present work is dedicated to a study of the corrosion resistance of AZ91D (91% Mg) alloy in wet environments. Three industrial alloys obtained by die-casting or sand casting were subjected to salt spray corrosion tests (ASTM-B117 standard) and immersion tests. Weight loss kinetic curves were measured. Surface analysis was performed by X-ray photoelectron diffraction (XPS). After corrosion the sand cast alloy presents a surface mainly enriched in hydroxides and carbonates while the die-cast alloy presents a surface enriched also in mixed Mg-Al oxides. The quantitative analysis of the rate Mg/Al shows an enrichment in aluminium for the die-cast alloys in comparison to the sand cast alloy

7 CFR Appendix C to Part 226 - Child Nutrition (CN) Labeling Program

Science.gov (United States)

2010-01-01

...). EC17SE91.009 (c) The CN label statement includes the following: (1) The product identification number... 7 Agriculture 4 2010-01-01 2010-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to.... C Appendix C to Part 226—Child Nutrition (CN) Labeling Program 1. The Child Nutrition (CN) Labeling...

Hanford Single-Shell Tank Leak Causes and Locations - 241-C Farm

Energy Technology Data Exchange (ETDEWEB)

Girardot, Crystal L.; Harlow, Donald G.

2013-07-30

This document identifies 241-C Tank Farm (C Farm) leak causes and locations for the 100 series leaking tanks (241-C-101 and 241-C-105) identified in RPP-RPT-33418, Rev. 2, Hanford C-Farm Leak Inventory Assessments Report. This document satisfies the C Farm portion of the target (T04) in the Hanford Federal Facility Agreement and Consent Order milestone M-045-91F.

Evolution of the microstructure and hardness of a rapidly solidified/melt-spun AZ91 alloy upon aging at different temperatures

International Nuclear Information System (INIS)

Wang Baishu; Liu Yongbing; An Jian; Li Rongguang; Su Zhenguo; Su Guihua; Lu You; Cao Zhanyi

2009-01-01

The effect of aging at different temperatures on a rapidly solidified/melt-spun AZ91 alloy has been investigated in depth. The microstructures of as-spun and aged ribbons with a thickness of approximately 60 μm were characterized using X-ray diffraction, transmission electron microscopy and laser optical microscopy; microhardness measurements were also conducted. It was found that the commercial AZ91 alloy undergoes a cellular/dendritic transition during melt-spinning at a speed of 34 m/s. A strengthening effect due to aging was observed: a maximum hardness of 110 HV/0.05 and an age-hardenability of 50% were obtained when the ribbon was aged at 200 deg. C for 20 min. The β-Mg 17 Al 12 phase exhibits net and dispersion types of distribution during precipitation. The dispersion of precipitates in dendritic grains or cells is the main source of strengthening

Autoradiographic imaging of cerebral ischemia using hypoxic marker: Tc-99m-HL91 in animal models

International Nuclear Information System (INIS)

Jiang, N.Y.; Zhu, C.S.; Hu, X.K.

2002-01-01

Objective: To explore the possibility of Tc-99m-HL91 imaging in detecting the ischemic penumbra during acute stoke. Methods: 16 Sprague-Dawley (SD) rats were divided into operation group (n=12) and pseudo-operation group (n=4) randomly. In operation group, 12 middle cerebral artery occlusion animal (MCAO) models were established by electrocautery. 4 rats in pseudo-operation group were treated as a control without occlusion. All animals were injected Tc-99m-HL91 intravenously 2 hours after occlusion. Animals were killed at different time after injection and brains were removed rapidly from the skull to do the autoradiographic study. Result: The ischemic territory accumulated more Tc-99m-HL91 than the opposite site in the autoradiogram at 1 hour after injection. The ischemic cerebral tissue can be visualized clearly. At 2, 4 hours after injection, the difference of accumulation of Tc-99m-HL91 in target and non-target site became more obvious. By using computer-enhanced imaging analysis, the optical density (OD) ratio differences between each subgroup of operation group and pseudo-operation group were all significant. Conclusion : Tc-99m-HL91 can be avidly taken up by ischemic penumbra. Tc-99m-HL91 is a potential agent for imaging hypoxic tissue, and Tc-99m-HL91 SPECT may be a promising imaging method in detecting the ischemic penumbra

Autoradiographic imaging of cerebral ischaemia using hypoxic marker: 99mTc-HL91 in animal models

International Nuclear Information System (INIS)

Ningyi, J.; Cansheng, Z.; Xiaoke, H.

2002-01-01

Objective: To explore the possibility of 99mTc-HL91 imaging in detecting the ischemic penumbra during acute stoke. Methods 16 Sprague-Dawley (SD) rats were divided into operation group (n=12) and pseudo-operation group (n=4) randomly. In operation group, 12 middle cerebral artery occlusion animal (MCAO) models were established by electrocautery. 4 rats in pseudo-operation group were treated as a control without occlusion. All animals were injected 99mTc-HL91 intravenously 2 hours after occlusion. Animals were killed at different time after injection and brains were removed rapidly from the skull to do the autoradiographic study. Result The ischemic territory accumulated more 99mTc-HL91 than the opposite site in the autoradiogram at 1 hour after injection. The ischemic cerebral tissue can be visualized clearly. At 2, 4 hours after injection, the difference of accumulation of 99mTc-HL91 in target and non-target site became more obvious. By using computer-enhanced imaging analysis, the optical density (OD) ratio differences between each subgroup of operation group and pseudo-operation group were all significant. Conclusion 99mTc-HL91 can be avidly taken up by ischemic penumbra. 99mTc-HL91 is a potential agent for imaging hypoxic tissue, and 99mTc-HL91 SPECT may be a promising imaging method in detecting the ischemic penumbra

High Temperature Behavior of Cr3C2-NiCr Coatings in the Actual Coal-Fired Boiler Environment

Science.gov (United States)

Bhatia, Rakesh; Sidhu, Hazoor Singh; Sidhu, Buta Singh

2015-03-01

Erosion-corrosion is a serious problem observed in steam-powered electricity generation plants, and industrial waste incinerators. In the present study, four compositions of Cr3C2-(Ni-20Cr) alloy coating powder were deposited by high-velocity oxy-fuel spray technique on T-91 boiler tube steel. The cyclic studies were performed in a coal-fired boiler at 1123 K ± 10 K (850 °C ± 10 °C). X-ray diffraction, scanning electron microscopy/energy dispersive X-ray analysis and elemental mapping analysis techniques were used to analyze the corrosion products. All the coatings deposited on T-91 boiler tube steel imparted hot corrosion resistance. The 65 pctCr3C2 -35 pct (Ni-20Cr)-coated T-91 steel sample performed better than all other coated samples in the given environment.

Parameters promoting liquid metal embrittlement of the T91 steel in lead-bismuth eutectic alloy

International Nuclear Information System (INIS)

Proriol Serre, I.; Ye, C.; Vogt, J.B.

2015-01-01

The use of liquid lead-bismuth eutectic (LBE) as a spallation target and a coolant in accelerator-driven systems raises the question of the reliability of structural materials, such as T91 martensitic steel in terms of liquid metal assisted damage and corrosion. In this study, the mechanical behaviour of the T91 martensitic steel was examined in liquid lead-bismuth eutectic (LBE) and in inert atmosphere. Several conditions showed the most sensitive embrittlement factor. The Small Punch Test technique was employed using smooth specimens. In this standard heat treatment, T91 appeared in general as a ductile material, and became brittle in the considered conditions if the test was performed in LBE. It turns out that the loading rate appeared as a critical parameter for the occurrence of liquid metal embrittlement (LME) of the T91 steel in LBE. Loading the T91 very slowly instead of rapidly in oxygen saturated LBE resulted in brittle fracture. Furthermore, low-oxygen content in LBE and an increase in temperature promote LME. (authors)

Coupled C, N and P controls on photosynthesis, primary production and decomposition across a land use intensification gradient and implications for land atmosphere C exchange

Science.gov (United States)

Reinsch, Sabine; Glanville, Helen; Smart, Simon; Jones, Davey; Mercado, Lina; Blanes-Alberola, Mamen; Cosby, Jack; Emmett, Bridget

2016-04-01

The coupling of C, N and P cycles has rarely been studied through the air- land-water continuum. This is essential if we are to enhance land-atmosphere models to account for N and P limitations. It is also important for developing integrated catchment management solutions to deliver improved water quality combined with a wide range of other ecosystem functions and services. We present results from a project which is part of the interdisciplinary pan-UK NERC Macronutrient Cycles Programme (macronutrient-cycles.ouce.ox.ac.uk/). Our aim is to quantify how coupled C, N & P cycles change across a land use intensification gradient from arable to grass, woodland and bog ecosystems and identify the implications for land-atmosphere C exchange. We focus on three key processes; photosynthesis, annual net primary productivity and decomposition and explore their consequences for biodiversity. Other aspects of the project track delivery to, and transformations within, the freshwater and coastal systems. When we explore relationships between C, N and P, results indicate all habitat types fall on a single land use intensification gradient. Stoichiometry suggests plant productivity is primarily N limited. P limitation occurs rarely but at all levels of intensification. Soil priming shows our soils are primarily C limited and, surprisingly, soil acidity provides one of the most powerful single predictors of processes and ecosystem services perhaps as it is a good integrator of many soil properties. Incorporating this knowledge into the UK land-atmosphere model JULES will improve aNPP projections. These are then being used as inputs into a plant species model called MULTIMOVE to enable future scenarios of climate change, land use and air pollution on habitat suitability for > 1400 plant species to be explored. The enhanced Jules model will ensure both N and P limitations on C fluxes from above and below-ground are incorporated into future UK scenario applications.

Creep Rupture of the Simulated HAZ of T92 Steel Compared to that of a T91 Steel.

Science.gov (United States)

Peng, Yu-Quan; Chen, Tai-Cheng; Chung, Tien-Jung; Jeng, Sheng-Long; Huang, Rong-Tan; Tsay, Leu-Wen

2017-02-08

The increased thermal efficiency of fossil power plants calls for the development of advanced creep-resistant alloy steels like T92. In this study, microstructures found in the heat-affected zone (HAZ) of a T92 steel weld were simulated to evaluate their creep-rupture-life at elevated temperatures. An infrared heating system was used to heat the samples to 860 °C (around A C1 ), 900 °C (slightly below A C3 ), and 940 °C (moderately above A C3 ) for one minute, before cooling to room temperature. The simulated specimens were then subjected to a conventional post-weld heat treatment (PWHT) at 750 °C for two hours, where both the 900 °C and 940 °C simulated specimens had fine grain sizes. In the as-treated condition, the 900 °C simulated specimen consisted of fine lath martensite, ferrite subgrains, and undissolved carbides, while residual carbides and fresh martensite were found in the 940 °C simulated specimen. The results of short-term creep tests indicated that the creep resistance of the 900 °C and 940 °C simulated specimens was poorer than that of the 860 °C simulated specimens and the base metal. Moreover, simulated T92 steel samples had higher creep strength than the T91 counterpart specimens.

Behavior of ferritic/martensitic steels after n-irradiation at 200 and 300 deg. C

International Nuclear Information System (INIS)

Matijasevic, M.; Lucon, E.; Almazouzi, A.

2008-01-01

High chromium ferritic/martensitic (F/M) steels are considered as the most promising structural materials for accelerator driven systems (ADS). One drawback that needs to be quantified is the significant hardening and embrittlement caused by neutron irradiation at low temperatures with production of spallation elements. In this paper irradiation effects on the mechanical properties of F/M steels have been studied and comparisons are provided between two ferritic/martensitic steels, namely T91 and EUROFER97. Both materials have been irradiated in the BR2 reactor of SCK-CEN/Mol at 300 deg. C up to doses ranging from 0.06 to 1.5 dpa. Tensile tests results obtained between -160 deg. C and 300 deg. C clearly show irradiation hardening (increase of yield and ultimate tensile strengths), as well as reduction of uniform and total elongation. Irradiation effects for EUROFER97 starting from 0.6 dpa are more pronounced compared to T91, showing a significant decrease in work hardening. The results are compared to our latest data that were obtained within a previous program (SPIRE), where T91 had also been irradiated in BR2 at 200 deg. C (up to 2.6 dpa), and tested between -170 deg. C and 300 deg. C. Irradiation effects at lower irradiation temperatures are more significant

Behavior of ferritic/martensitic steels after n-irradiation at 200 and 300 °C

Science.gov (United States)

Matijasevic, M.; Lucon, E.; Almazouzi, A.

2008-06-01

High chromium ferritic/martensitic (F/M) steels are considered as the most promising structural materials for accelerator driven systems (ADS). One drawback that needs to be quantified is the significant hardening and embrittlement caused by neutron irradiation at low temperatures with production of spallation elements. In this paper irradiation effects on the mechanical properties of F/M steels have been studied and comparisons are provided between two ferritic/martensitic steels, namely T91 and EUROFER97. Both materials have been irradiated in the BR2 reactor of SCK-CEN/Mol at 300 °C up to doses ranging from 0.06 to 1.5 dpa. Tensile tests results obtained between -160 °C and 300 °C clearly show irradiation hardening (increase of yield and ultimate tensile strengths), as well as reduction of uniform and total elongation. Irradiation effects for EUROFER97 starting from 0.6 dpa are more pronounced compared to T91, showing a significant decrease in work hardening. The results are compared to our latest data that were obtained within a previous program (SPIRE), where T91 had also been irradiated in BR2 at 200 °C (up to 2.6 dpa), and tested between -170 °C and 300 °C. Irradiation effects at lower irradiation temperatures are more significant.

The effect of SiC particle size on the properties of Cu–SiC composites

International Nuclear Information System (INIS)

Celebi Efe, G.; Zeytin, S.; Bindal, C.

2012-01-01

Graphical abstract: The relative densities of Cu–SiC composites sintered at 700 °C for 2 h are ranged from 97.3% to 91.8% for SiC with 1 μm particle size and 97.5% to 95.2% for SiC with 5 μm particle size, microhardness of composites ranged from 143 to 167 HV for SiC having 1 μm particle size and 156–182 HVN for SiC having 5 μm particle size and the electrical conductivity of composites changed between 85.9% IACS and 55.7% IACS for SiC with 1 μm particle size, 87.9% IACS and 65.2%IACS for SiC with 5 μm particle size. It was found that electrical conductivity of composites containing SiC with 5 μm particle size is better than that of Cu–SiC composites containing SiC with particle size of 1 μm. Highlights: ► In this research, the effect of SiC particle size on some properties of Cu–SiC composites were investigated. ► The mechanical properties were improved. ► The electrical properties were obtained at desirable level. -- Abstract: SiC particulate-reinforced copper composites were prepared by powder metallurgy (PM) method and conventional atmospheric sintering. Scanning electron microscope (SEM), X-ray diffraction (XRD) techniques were used to characterize the sintered composites. The effect of SiC content and particle size on the relative density, hardness and electrical conductivity of composites were investigated. The relative densities of Cu–SiC composites sintered at 700 °C for 2 h are ranged from 97.3% to 91.8% for SiC with 1 μm particle size and from 97.5% to 95.2% for SiC with 5 μm particle size. Microhardness of composites ranged from 143 to 167 HV for SiC having 1 μm particle size and from 156 to 182 HV for SiC having 5 μm particle size. The electrical conductivity of composites changed between 85.9% IACS and 55.7% IACS for SiC with 1 μm particle size, between 87.9% IACS and 65.2% IACS for SiC with 5 μm particle size.

10 CFR 140.91 - Appendix A-Form of nuclear energy liability policy for facilities.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Appendix A-Form of nuclear energy liability policy for facilities. 140.91 Section 140.91 Energy NUCLEAR REGULATORY COMMISSION (CONTINUED) FINANCIAL PROTECTION... other matter not within the Commission's statutory jurisdiction under the Atomic Energy Act. Nuclear...

Annual report 1990-91

International Nuclear Information System (INIS)

1991-01-01

The annual report of the Department of Atomic Energy (DAE), India, for the fiscal year 1990-91 describes: (1) the research and development work carried out by DAE's various research establishments and by fully funded research institutes, (2) performance of nuclear power stations, nuclear fuel complex, fuel reprocessing plants and heavy water plants, (3) exploration work for atomic minerals, (5) regulatory and safety functions, (6) performance of public sector undertakings, namely Indian Rare Earths Ltd., Electronics Corporation of India Ltd., and (6) other activities like international relations, emergency planning, financial assistance to research projects, etc. During the year, 6182 MUs electricity was generated, Unit-1 of Narora Atomic Power Station commenced commercial operation, Hazira Heavy Water Plant was commissioned, Sewage Hygienisation Research Irradiator at Baroda and Heavy Rare Earths Oxide Plant at Udyogmandal were also commissioned, promising geologic deposits of uranium were found at Domiasat (Meghalaya), and PURNIMA-III attained criticality. (M.G.B.)

C-Reactive Protein Impairs Dendritic Cell Development, Maturation, and Function: Implications for Peripheral Tolerance

Directory of Open Access Journals (Sweden)

Rachel V. Jimenez

2018-03-01

Full Text Available C-reactive protein (CRP is the prototypical acute phase reactant, increasing in blood concentration rapidly and several-fold in response to inflammation. Recent evidence indicates that CRP has an important physiological role even at low, baseline levels, or in the absence of overt inflammation. For example, we have shown that human CRP inhibits the progression of experimental autoimmune encephalomyelitis (EAE in CRP transgenic mice by shifting CD4+ T cells away from the TH1 and toward the TH2 subset. Notably, this action required the inhibitory Fcγ receptor IIB (FcγRIIB, but did not require high levels of human CRP. Herein, we sought to determine if CRP’s influence in EAE might be explained by CRP acting on dendritic cells (DC; antigen presenting cells known to express FcγRIIB. We found that CRP (50 µg/ml reduced the yield of CD11c+ bone marrow-derived DCs (BMDCs and CRP (≥5 μg/ml prevented their full expression of major histocompatibility complex class II and the co-stimulatory molecules CD86 and CD40. CRP also decreased the ability of BMDCs to stimulate antigen-driven proliferation of T cells in vitro. Importantly, if the BMDCs were genetically deficient in mouse FcγRIIB then (i the ability of CRP to alter BMDC surface phenotype and impair T cell proliferation was ablated and (ii CD11c-driven expression of a human FCGR2B transgene rescued the CRP effect. Lastly, the protective influence of CRP in EAE was fully restored in mice with CD11c-driven human FcγRIIB expression. These findings add to the growing evidence that CRP has important biological effects even in the absence of an acute phase response, i.e., CRP acts as a tonic suppressor of the adaptive immune system. The ability of CRP to suppress development, maturation, and function of DCs implicates CRP in the maintenance of peripheral T cell tolerance.

17 CFR 140.91 - Delegation of authority to the Director of the Division of Trading and Markets.

Science.gov (United States)

2010-04-01

... Director of the Division of Trading and Markets. 140.91 Section 140.91 Commodity and Securities Exchanges COMMODITY FUTURES TRADING COMMISSION ORGANIZATION, FUNCTIONS, AND PROCEDURES OF THE COMMISSION Functions § 140.91 Delegation of authority to the Director of the Division of Trading and Markets. (a) The...

Autoradiographic imaging of cerebral ischemia using hypoxic marker: 99mTc-HL91 in animal models

International Nuclear Information System (INIS)

Zhu Cansheng; Jiang Ningyi; Hu Xiaoke

2001-01-01

Objective: To explore the possibility of 99m Tc-HL91 imaging in detecting the ischemic penumbra during acute stoke. Methods; 16 Sprague-Dawley (SD) rats were divided into operation group (n=12) and pseudo-operation group (n=4) randomly. In operation group, 12 middle cerebral artery occlusion animal (MCAO) models were established by electrocautery. 4 rats in pseudo-operation group were treated as a control without occlusion. All animals were injected 99m Tc-HL91 intravenously 2 hours after occlusion. Animals were killed at different time after injection and brains were removed rapidly from the skull to do the autoradiographic study. Results: The ischemic territory accumulated more 99m Tc-HL91 than the opposite site in the autoradiogram at 1 hour after injection. The ischemic cerebral tissue can be visualized clearly. At 2, 4 hours after injection, the difference of accumulation of 99m Tc-HL91 in target and non-target site became more obvious. By using computer-enhanced imaging analysis, the optical density (OD) ratio differences between each subgroup of operation group and pseudo-operation group were all significant. The OD ratios (T/N) were 1.2691±0.0189, 1.3542±0.0119, 2.1201±0.0616, 2.5369±0.1214 respectively at 1, 2, 4 hours after 99m Tc-HL91 injection. Conclusion: 99m Tc-HL91 can be avidly taken up by ischemic penumbra. 99m Tc-HL91 is a potential agent for imaging hypoxic tissue, and 99m Tc-HL91 SPECT may be a promising imaging method in detecting the ischemic penumbra

28 CFR 91.63 - Preparing an Environmental Impact Statement

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Preparing an Environmental Impact... CORRECTIONAL FACILITIES Environmental Impact Review Procedures for VOI/TIS Grant Program Environmental Review Procedures § 91.63 Preparing an Environmental Impact Statement (a) Initial determination. OJP will determine...

Líneas de pobreza subjetiva en el cálculo del potencial de calidad de vida (QLP en España. Aplicación a partir de la EPF de 1990-91

Directory of Open Access Journals (Sweden)

Rafael Pinilla Pallejà

2004-01-01

Full Text Available El Potencial de Calidad de Vida (Quality Life Potential, QLP, presentado en Pinilla y Goerlich (2004, es una propuesta innovadora de medida de bienestar social que combina las rentas estimadas por encima de la línea de pobreza con esperanzas de vida a la edad actual a partir de una función de calidad de vida. Para calcular el QLP necesitamos elegir una línea de pobreza. La mejor elección sería probablemente una línea de pobreza subjetiva (SPL pero eso no siempre es posible. El objetivo de este trabajo es valorar la relevancia de la línea de pobreza elegida para estimar el QLP. Se calculará el QLP a partir de la línea subjetiva de pobreza y a partir de una línea de pobreza relativa convencional para los datos de la Encuesta de Presupuestos Familiares (EPF de 1990-91. Además, compararemos el QLP estimado con las medidas convencionales de rentas como la renta per cápita. En general los indicadores de pobreza son bastante diferentes dependiendo del método elegido, pero el QLP presenta sólo pequeñas diferencias. Al menos para los datos de España en 1990-91 los QLP que se obtienen con ambas líneas de pobreza son similares. Se necesita más investigación para comprobar si esta semejanza se mantiene válida a lo largo del tiempo.

Rdiation protection. Progress report 1990-91

International Nuclear Information System (INIS)

1993-01-01

The progress report of the 1990-91 radiation protection programme outlines the research work carried out during the whole contractual period under all contracts between the Commission of the European Communities and research groups in the Member States. More than 400 scientists collaborated on this program. Objectives and results of more than 130 projects are reported. They are grouped into three sectors: human exposure to radiation and radioactivity; consequences of radiation exposure to man, their assessment, prevention and treatment; risks and management of radiation protection. 134 reports were abstracted and indexed individually for the INIS database. (R.P.)

Performance of different metrics proposed to CIE TC 1-91

Directory of Open Access Journals (Sweden)

Pramod Bhusal

2017-12-01

Full Text Available The main aim of the article is to find out the performance of different metrics proposed to CIE TC 1-91. Currently, six different indexes have been proposed to CIE TC 1-91: Colour Quality Scale (CQS, Feeling of Contrast Index (FCI, Memory colour rendering index (MCRI, Preference of skin (PS, Relative gamut area index (RGAI and Illuminating Engineering society Method for evaluating light source colour rendition (IES TM-30. The evaluation and analysis are based on previously conducted experiment in lighting booth. The analysis showed the area based metric FCI was good subjective preference indicator. The subjective preference was measured in terms of naturalness of objects, colourfulness of colour checker chart, and the visual appearance of the lit scene in the booth.

28 CFR 91.57 - Actions that normally require the preparation of an environmental impact statement.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Actions that normally require the preparation of an environmental impact statement. 91.57 Section 91.57 Judicial Administration DEPARTMENT OF... process. Environmental Review Procedures ...

Performance of different colour quality metrics proposed to CIE TC 1-91

OpenAIRE

Bhusal, Pramod; Dangol, Rajendra

2017-01-01

The main aim of the article is to find out the performance of different metrics proposed to CIE TC 1-91. Currently, six different indexes have been proposed to CIE TC 1-91: Colour Quality Scale (CQS), Feeling of Contrast Index (FCI), Memory colour rendering index (MCRI), Preference of skin (PS), Relative gamut area index (RGAI) and Illuminating Engineering society Method for evaluating light source colour rendition (IES TM-30). The evaluation and analysis are based on previously conducted exp...

7 CFR Appendix C to Part 225 - Child Nutrition (CN) Labeling Program

Science.gov (United States)

2010-01-01

...). EC17SE91.006 (c) The CN label statement includes the following: (1) The product identification number... 7 Agriculture 4 2010-01-01 2010-01-01 false Child Nutrition (CN) Labeling Program C Appendix C to... Appendix C to Part 225—Child Nutrition (CN) Labeling Program 1. The Child Nutrition (CN) Labeling Program...

Microstructure and Nano-Hardness of 10 MeV Cl-Ion Irradiated T91 Steel

International Nuclear Information System (INIS)

Hu Jing; Wang Xianping; Gao Yunxia; Zhuang Zhong; Zhang Tao; Fang Qianfeng; Liu Changsong

2015-01-01

Hardening and elemental segregation of T91 martenstic steel irradiated by 10 MeV Cl ions to doses from 0.06 dpa to 0.83 dpa were investigated with the nanoindentation technique and transmission electron microscopy (TEM). The results demonstrated that the irradiation hardening was closely related with irradiation dose. By increasing the dose, the hardness increased rapidly at first from the initial value of 3.15 GPa before irradiation, and then tended to saturate at a value of 3.58 GPa at the highest dose of 0.83 dpa. Combined with TEM observation, the mechanism of hardening was preliminary attributed to the formation of M(Fe,Cr) 2 3C 6 carbides induced by the high energy Cl-ion irradiation. (paper)

Surface Brillouin scattering measurement of the elastic constants of single crystal InAs0.91Sb0.09

International Nuclear Information System (INIS)

Kotane, L M; Comins, J D; Every, A G; Botha, J R

2011-01-01

Surface Brillouin scattering of light has been used to measure the angular dependence of the Rayleigh surface acoustic wave (SAW), pseudo surface acoustic wave (PSAW) and longitudinal lateral wave (LLW) speeds in a (100)-oriented single crystal of the ternary semiconductor alloy InAs 0.91 Sb 0.09 . The wave speed measurements have been used to determine the room temperature values of the elastic constants C 11 , C 12 and C 44 of the alloy. A simple and robust fitting procedure has been implemented for recovering the elastic constants, in which the merit function is constructed from explicit secular functions that determine the surface and lateral wave speeds in the [001] and [011] crystallographic directions. In the fitting, relatively larger weighting factors have been assigned to the SAW and PSAW data because of the greater precision with which the surface modes can be measured as compared with the lateral wave.

14 CFR 91.1017 - Amending program manager's management specifications.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Amending program manager's management... Ownership Operations Program Management § 91.1017 Amending program manager's management specifications. (a... specifications; or (2) The program manager applies for the amendment of any management specifications, and the...

Radiation-induced segregation and phase stability in ferritic-martensitic alloy T 91

Energy Technology Data Exchange (ETDEWEB)

Wharry, Janelle P.; Jiao Zhijie; Shankar, Vani [University of Michigan, 2355 Bonisteel Blvd, Ann Arbor, MI 48109-2104 (United States); Busby, Jeremy T. [Oak Ridge National Laboratory, 1 Bethel Valley Rd, Oak Ridge, TN 37831 (United States); Was, Gary S., E-mail: gsw@umich.edu [University of Michigan, 2355 Bonisteel Blvd, Ann Arbor, MI 48109-2104 (United States)

2011-10-01

Radiation-induced segregation in ferritic-martensitic alloy T 91 was studied to understand the behavior of solutes as a function of dose and temperature. Irradiations were conducted using 2 MeV protons to doses of 1, 3, 7 and 10 dpa at 400 deg. C. Radiation-induced segregation at prior austenite grain boundaries was measured, and various features of the irradiated microstructure were characterized, including grain boundary carbide coverage, the dislocation microstructure, radiation-induced precipitation and irradiation hardening. Results showed that Cr, Ni and Si segregate to prior austenite grain boundaries at low dose, but segregation ceases and redistribution occurs above 3 dpa. Grain boundary carbide coverage mirrors radiation-induced segregation. Irradiation induces formation of Ni-Si-Mn and Cu-rich precipitates that account for the majority of irradiation hardening. Radiation-induced segregation behavior is likely linked to the evolution of the precipitate and dislocation microstructures.

Genetic Algorithmic Optimization of PHB Production by a Mixed Culture in an Optimally Dispersed Fed-batch Bioreactor

Directory of Open Access Journals (Sweden)

Pratap R. Patnaik

2009-10-01

Full Text Available Poly-β-hydroxybutyrate (PHB is an energy-storage polymer whose properties are similar to those of chemical polymers such as polyethylene and polypropylene. Moreover, PHB is biodegradable, absorbed by human tissues and less energy-consuming than synthetic polymers. Although Ralstonia eutropha is widely used to synthesize PHB, it is inefficient in utilizing glucose and similar sugars. Therefore a co-culture of R. eutropha and Lactobacillus delbrueckii is preferred since the latter can convert glucose to lactate, which R. eutropha can metabolize easily. Tohyama et al. [24] maximized PHB production in a well-mixed fed-batch bioreactor with glucose and (NH42SO4 as the primary substrates. Since production-scale bioreactors often deviate from ideal laboratory-scale reactors, a large bioreactor was simulated by means of a dispersion model with the kinetics determined by Tohyama et al. [24] and dispersion set at an optimum Peclet number of 20 [32]. The time-dependent feed rates of the two substrates were determined through a genetic algorithm (GA to maximize PHB production. This bioreactor produced 22.2% more PHB per liter and 12.8% more cell mass than achieved by Tohyama et al. [24]. These results, and similar observations with other fermentations, indicate the feasibility of enhancing the efficiency of large nonideal bioreactors through GA optimizations.

Heat Transfer Analysis of Localized Heat-Treatment for Grade 91 Steel

Science.gov (United States)

Walker, Jacob D.

Many of the projects utilizing Grade 91 steel are large in scale, therefore it is necessary to assemble on site. The assembly of the major pieces requires welding in the assembly; this drastically changes the superior mechanical properties of Grade 91 steel that it was specifically developed for. Therefore, because of the adverse effects of welding on the mechanical properties of Grade 91, it is necessary to do a localized post weld heat treatment. As with most metallic materials grade 91 steel requires a very specific heat treatment process. This process includes a specific temperature and duration at that temperature to achieve the heat treatment desired. Extensive research has been done to determine the proper temperatures and duration to provide the proper microstructure for the superior mechanical properties that are inherent to Grade 91 steel. The welded sections are typically large structures that require local heat treatments and cannot be placed in an oven. The locations of these structures vary from indoors in a controlled environment to outdoors with unpredictable environments. These environments can be controlled somewhat, however in large part the surrounding conditions are unchangeable. Therefore, there is a need to develop methods to accurately apply the surrounding conditions and geometries to a theoretical model in order to provide the proper requirements for the local heat treatment procedure. Within this requirement is the requirement to define unknowns used in the heat transfer equations so that accurate models can be produced and accurate results predicted. This study investigates experimentally and numerically the heat transfer and temperature fields of Grade 91 piping in a local heat treatment. The objective of this thesis research is to determine all of the needed heat transfer coefficients. The appropriate heat transfer coefficients are determined through the inverse heat conduction method utilizing a ceramic heat blanket. This will be done

Aqueous samples from B-Plant, Tank 9-1

International Nuclear Information System (INIS)

Bell, K.E.

1995-01-01

This document is the final report for the B-Plant Tank 9-1 sampling and analysis program. This report is divided into three parts: first, a narrative about the history, sampling effort, quality control, sample tracking/laboratory identification, and a summary of the analysis; second, sampling and custody data; and lastly, a set of compiled data from the laboratory analysis

The 91Zr(d,t)90Zr reaction

International Nuclear Information System (INIS)

Gomes, L.C.

1975-01-01

Sixteen levels populated in the 91 Zr(d,t) 90 Zr pick-up reaction were studied with 16 MeV deuterons. Distorted waves Born approximation calculations were compared to the data, and yielded spectroscopic factors and l values. Particle-hole states in 90 Zr were observed. Some significant errors were found in Zr(d,t) reactions Q values recently compiled [pt

Microstructure and corrosion behavior of electrodeposited nano-crystalline nickel coating on AZ91 Mg alloy

Energy Technology Data Exchange (ETDEWEB)

Zarebidaki, Arman, E-mail: arman.zare@iauyazd.ac.ir; Mahmoudikohani, Hassan, E-mail: hassanmahmoudi.k@gmail.com; Aboutalebi, Mohammad-Reza

2014-12-05

Highlights: • Activation, zincating, and Cu electrodeposition were used as pretreatment processes for electrodeposition of nickel coatings. • Nano-crystalline nickel coatings were successfully electrodeposited onto the AZ91 Mg alloys. • Effect of nickel electrodeposited coating on the corrosion resistance of AZ91 Mg alloy has been studied. - Abstract: In order to enhance the corrosion resistance, nickel coating was electrodeposited onto AZ91 Mg alloy. Activation, zincating, and Cu electrodeposition used as pretreatment processes for better adhesion and corrosion performance of the nickel over layer. The corrosion properties of the AZ91 Mg alloy, nickel electroplated AZ91 Mg alloy, and pure nickel was assessed via polarization and electrochemical impedance spectroscopy (EIS) methods in 3.5 wt% NaCl solution. Moreover, the structure of the coating was investigated by means of X-ray diffraction, whereas specimen’s morphology and elemental composition were analyzed using scanning electron microscope (SEM) equipped with energy dispersive spectrometer (EDS). Measurements revealed that the coating has a nano-crystalline structure with the grain size of 95 nm. Corrosion results showed superior corrosion resistance for the coated AZ91 Mg alloy as the corrosion current density decreased from 2.5 × 10{sup −4} A cm{sup −2}, for the uncoated sample, to 1.5 × 10{sup −5} A cm{sup −2}, for coated specimen and the corrosion potential increased from −1.55 V to −0.98 V (vs. Ag/AgCl) at the same condition.

Hypoxia-induced alteration of tracer accumulation in cultured cancer cells and xenografts in mice: implications for pre-therapeutic prediction of treatment outcomes with 99mTc-sestamibi, 201Tl chloride and 99mTc-HL91

International Nuclear Information System (INIS)

Kinuya, Seigo; Yokoyama, Kunihiko; Li, Xiao-Feng; Bai, Jingming; Michigishi, Takatoshi; Tonami, Norihisa; Watanabe, Naoto; Shuke, Noriyuki; Takayama, Teruhiko; Bunko, Hisashi

2002-01-01

Weak visualization of tumours in pre-therapeutic scintigrams with technetium-99m sestamibi (MIBI) is likely a predictive sign of unfavourable tumour response to radiotherapy and chemotherapy. However, factors relating to this scintigraphic finding are not well understood. The presence of hypoxic tumour cells is one of the major reasons for therapeutic failure; consequently, we attempted to determine whether oxygenation status affects 99m Tc-MIBI accumulation in tumour cells. LS180 human colon cancer and T24 human bladder cancer cells were incubated in air or N 2 gas at 37 C. Cellular uptake of 99m Tc-MIBI was subsequently determined at 15, 60 and 120 min. Uptake of thallium-201 chloride was also assessed. Uptake of 99m Tc-HL91 was assessed as a hypoxic marker. Accumulation of the tracers in LS180 xenografts was observed in mice treated with 5 mg/kg hydralazine and compared with that in untreated mice. pO 2 in the medium and tumours was measured with O 2 microelectrodes. N 2 gas flow gradually reduced pO 2 in the cell suspension to 1-2 mmHg in 60 min. Cellular uptake of 99m Tc-MIBI in LS180 cells decreased by approximately 30% in N 2 gas in comparison to that in air throughout the study. Hypoxia had a more prominent influence on 201 Tl uptake, which displayed a reduction of approximately 60% in N 2 gas at 120 min, than on 99m Tc-MIBI uptake. On the other hand, N 2 gas induced an increase of 170% in 99m Tc-HL91 uptake at 120 min, indicating the hypoxic condition of cells. The results of in vitro assays employing the T24 cell line were similar to those obtained with the LS180 cell line. Hydralazine treatment markedly reduced 99m Tc-MIBI and 201 Tl accumulation in LS180 xenografts; moreover, intratumoural pO 2 decreased from 14.5±6.6 mmHg to 7.6±6.2 mmHg. 99m Tc-HL91 accumulation in xenografts was markedly increased by hydralazine. In conclusion, hypoxia reduced accumulation of 99m Tc-MIBI and 201 Tl in tumour cells. Accordingly, hypoxia may be an important factor in

Creep Rupture of the Simulated HAZ of T92 Steel Compared to that of a T91 Steel

Directory of Open Access Journals (Sweden)

Yu-Quan Peng

2017-02-01

Full Text Available The increased thermal efficiency of fossil power plants calls for the development of advanced creep-resistant alloy steels like T92. In this study, microstructures found in the heat-affected zone (HAZ of a T92 steel weld were simulated to evaluate their creep-rupture-life at elevated temperatures. An infrared heating system was used to heat the samples to 860 °C (around AC1, 900 °C (slightly below AC3, and 940 °C (moderately above AC3 for one minute, before cooling to room temperature. The simulated specimens were then subjected to a conventional post-weld heat treatment (PWHT at 750 °C for two hours, where both the 900 °C and 940 °C simulated specimens had fine grain sizes. In the as-treated condition, the 900 °C simulated specimen consisted of fine lath martensite, ferrite subgrains, and undissolved carbides, while residual carbides and fresh martensite were found in the 940 °C simulated specimen. The results of short-term creep tests indicated that the creep resistance of the 900 °C and 940 °C simulated specimens was poorer than that of the 860 °C simulated specimens and the base metal. Moreover, simulated T92 steel samples had higher creep strength than the T91 counterpart specimens.

Elevated Temperature Corrosion Studies of AlCrN and TiAlN Coatings by PAPVD on T91 Boiler Steel

Science.gov (United States)

Goyal, Lucky; Chawla, Vikas; Hundal, Jasbir Singh

2017-11-01

The present investigation discusses the hot corrosion behavior of AlCrN and TiAlN nano-coatings on T91 boiler steel by PAPVD process subjected to molten salt of Na2SO4-60%V2O5 at 900 °C for 50 cycles. Surface and cross-sectional studies were performed by AFM, SEM/EDS and XRD techniques to understand the corrosion kinetics and mechanism. T91 bare boiler steel as well as TiAlN-coated specimen has shown higher internal oxidation as well as weight gain. The better corrosion resistance of AlCrN-coated specimen has been observed by virtue of higher availability of Cr and Al in the oxide scale as well as adherent and dense coating. The betterment of AlCrN coating can be attributed to low internal oxidation as well as movement of Cr and Al toward oxide scale to form protective corrosion barriers.

40 CFR 91.113 - Requirement of certification-emission control information label and engine identification number.

Science.gov (United States)

2010-07-01

... control information label and engine identification number. 91.113 Section 91.113 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) CONTROL OF EMISSIONS FROM... certification—emission control information label and engine identification number. (a) The engine manufacturer...

Extreme sea level implications of 1.5 °C, 2.0 °C, and 2.5 °C temperature stabilization targets in the 21st and 22nd centuries

Science.gov (United States)

Rasmussen, D. J.; Bittermann, Klaus; Buchanan, Maya K.; Kulp, Scott; Strauss, Benjamin H.; Kopp, Robert E.; Oppenheimer, Michael

2018-03-01

Sea-level rise (SLR) is magnifying the frequency and severity of extreme sea levels (ESLs) that can cause coastal flooding. The rate and amount of global mean sea-level (GMSL) rise is a function of the trajectory of global mean surface temperature (GMST). Therefore, temperature stabilization targets (e.g. 1.5 °C and 2.0 °C of warming above pre-industrial levels, as from the Paris Agreement) have important implications for coastal flood risk. Here, we assess, in a global network of tide gauges, the differences in the expected frequencies of ESLs between scenarios that stabilize GMST warming at 1.5 °C, 2.0 °C, and 2.5 °C above pre-industrial levels. We employ probabilistic, localized SLR projections and long-term hourly tide gauge records to estimate the expected frequencies of historical and future ESLs for the 21st and 22nd centuries. By 2100, under 1.5 °C, 2.0 °C, and 2.5 °C GMST stabilization, the median GMSL is projected to rise 48 cm (90% probability of 28-82 cm), 56 cm (28-96 cm), and 58 cm (37-93 cm), respectively. As an independent comparison, a semi-empirical sea level model calibrated to temperature and GMSL over the past two millennia estimates median GMSL rise within 7-8 cm of these projections. By 2150, relative to the 2.0 °C scenario and based on median sea level projections, GMST stabilization of 1.5 °C spares the inundation of lands currently home to about 5 million people, including 60 000 individuals currently residing in Small Island Developing States. We quantify projected changes to the expected frequency of historical 10-, 100-, and 500-year ESL events using frequency amplification factors that incorporate uncertainty in both local SLR and historical return periods of ESLs. By 2150, relative to a 2.0 °C scenario, the reduction in the frequency amplification of the historical 100 year ESL event arising from a 1.5 °C GMST stabilization is greatest in the eastern United States, with ESL event

Small punch tensile/fracture test data and 3D specimen surface data on Grade 91 ferritic/martensitic steel from cryogenic to room temperature.

Science.gov (United States)

Bruchhausen, Matthias; Lapetite, Jean-Marc; Ripplinger, Stefan; Austin, Tim

2016-12-01

Raw data from small punch tensile/fracture tests at two displacement rates in the temperature range from -196 °C to room temperature on Grade 91 ferritic/martensitic steel are presented. A number of specimens were analyzed after testing by means of X-ray computed tomography (CT). Based on the CT volume data detailed 3D surface maps of the specimens were established. All data are open access and available from Online Data Information Network (ODIN)https://odin.jrc.ec.europa.eu. The data presented in the current work has been analyzed in the research article "On the determination of the ductile to brittle transition temperature from small punch tests on Grade 91 ferritic-martensitic steel" (M. Bruchhausen, S. Holmström, J.-M. Lapetite, S. Ripplinger, 2015) [1].

Microstructure-based assessment of creep rupture behaviour of cast-forged P91 steel

Energy Technology Data Exchange (ETDEWEB)

Pandey, Chandan, E-mail: chandanpy.1989@gmail.com [Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Uttrakhand 247667 (India); Mahapatra, M.M. [School of Mechanical Sciences, Indian Institute of Technology Bhubaneswar, Odisha 751013 (India); Kumar, Pradeep; Vidyrathy, R.S. [Department of Mechanical and Industrial Engineering, Indian Institute of Technology Roorkee, Uttrakhand 247667 (India); Srivastava, A. [Senior Engineer, HEEP Section, BHEL Haridwar (India)

2017-05-17

The work presented in this study was performed with the intent to characterize the microstructure evolution for short term creep exposure of cast-forged P91 steel. The short-term creep test was performed at temperature range of 620–650 °C and stresses ranging from 120 to 200 MPa. To characterize the sample after creep exposure, field emission scanning electron microscopy (FESEM) with energy dispersive X-ray spectroscopy (EDS), optical microscope and micro-hardness testing were utilized. Creep tests were performed on round creep specimens. For low temperature service condition, longer creep life was obtained. The fracture surface of creep ruptured specimen were characterized by using the FESEM. The transgranular fracture mode was noticed in all the tests condition. The creep rupture life was found to be decreased with increase in applied stress. The maximum rupture life was measured about to be 3329.28 h for the sample exposed at 620 °C for 120 MPa. A negligible microstructural change was measured in gripping area compared to the gauge area (necking area) of crept sample. The laves phase formation was also noticed along the grain boundaries for creep exposure life of 3329.28 h.

Microstructure-based assessment of creep rupture behaviour of cast-forged P91 steel

International Nuclear Information System (INIS)

Pandey, Chandan; Mahapatra, M.M.; Kumar, Pradeep; Vidyrathy, R.S.; Srivastava, A.

2017-01-01

The work presented in this study was performed with the intent to characterize the microstructure evolution for short term creep exposure of cast-forged P91 steel. The short-term creep test was performed at temperature range of 620–650 °C and stresses ranging from 120 to 200 MPa. To characterize the sample after creep exposure, field emission scanning electron microscopy (FESEM) with energy dispersive X-ray spectroscopy (EDS), optical microscope and micro-hardness testing were utilized. Creep tests were performed on round creep specimens. For low temperature service condition, longer creep life was obtained. The fracture surface of creep ruptured specimen were characterized by using the FESEM. The transgranular fracture mode was noticed in all the tests condition. The creep rupture life was found to be decreased with increase in applied stress. The maximum rupture life was measured about to be 3329.28 h for the sample exposed at 620 °C for 120 MPa. A negligible microstructural change was measured in gripping area compared to the gauge area (necking area) of crept sample. The laves phase formation was also noticed along the grain boundaries for creep exposure life of 3329.28 h.

No. 2 heating oil/propane program. Final report, 1990/91

Energy Technology Data Exchange (ETDEWEB)

McBrien, J.

1991-06-01

During the 1990/91 heating season, the Massachusetts Division of Energy Resources (DOER) participated in a joint data collection program between several state energy offices and the federal Department of Energy`s (DOE) Energy Information Administration (EIA). The purpose of the program was to collect and monitor retail and wholesale heating oil and propane prices and inventories from October 1990 through March 1991. This final report begins with an overview of the unique events which had an impact on the reporting period. Next, the report summarizes the results from the residential heating oil and propane price surveys conducted by DOER over the 1990/91 heating season. The report also incorporates the wholesale heating oil and propane prices and inventories collected by the EIA and distributed to the states.

40 CFR 91.427 - Catalyst thermal stress resistance evaluation.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Catalyst thermal stress resistance... Procedures § 91.427 Catalyst thermal stress resistance evaluation. (a)(1) The purpose of the evaluation procedure specified in this section is to determine the effect of thermal stress on catalyst conversion...

40 CFR 91.310 - Engine intake air humidity measurement.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Engine intake air humidity measurement... Provisions § 91.310 Engine intake air humidity measurement. This section refers to engines which are supplied... air, the ambient testcell humidity measurement may be used. (a) Humidity conditioned air supply. Air...

Gold glyconanoparticles coupled to listeriolysin O 91-99 peptide serve as adjuvant therapy against melanoma.

Science.gov (United States)

Calderon-Gonzalez, R; Terán-Navarro, H; García, I; Marradi, M; Salcines-Cuevas, D; Yañez-Diaz, S; Solis-Angulo, A; Frande-Cabanes, E; Fariñas, M C; Garcia-Castaño, A; Gomez-Roman, J; Penades, S; Rivera, F; Freire, J; Álvarez-Domínguez, C

2017-08-03

Dendritic cell-based (DC-based) vaccines are promising immunotherapies for cancer. However, several factors, such as the lack of efficient targeted delivery and the sources and types of DCs, have limited the efficacy of DCs and their clinical potential. We propose an alternative nanotechnology-based vaccine platform with antibacterial prophylactic abilities that uses gold glyconanoparticles coupled to listeriolysin O 91-99 peptide (GNP-LLO 91-99 ), which acts as a novel adjuvant for cancer therapy. GNP-LLO 91-99 , when used to vaccinate mice, exhibited dual antitumour activities, namely, the inhibition of tumour migration and growth and adjuvant activity for recruiting and activating DCs, including those from melanoma patients. GNP-LLO 91-99 nanoparticles caused tumour apoptosis and induced antigen- and melanoma-specific cytotoxic Th1 responses (P ≤ 0.5). We propose this adjuvant nanotherapy for preventing the progression of the first stages of melanoma.

A DFT study of thermodynamic properties of C36 and C14 Fe2Zr Laves phases

Science.gov (United States)

Ali, Kawsar; Ghosh, P. S.; Arya, A. K.

2018-04-01

Fe-Zr alloys are promising materials for metallic waste immobilization in nuclear industry. C36 and C14 Fe2Zr Laves phases are frequently observed in Fe-Zr alloys that can host radionuclides. The phonon dispersions of C36 and C14 Fe2Zr Laves phases shows that both intermetallics are dynamically stable. The Helmholtz free energy, vibrational entropy, internal energy and specific heat at constant volume has been calculated. The zero point energies of C36 and C14 phases are 9.23 and 9.91 kJ/mole, respectively. The vibrational free energy becomes negative at 250 K and 270 K. The high temperature specific heat at constant volume of both intermetallics is 74 J/K/mole.

Detection of Infectious Bronchitis Virus (4/91 type in Broiler Chickens in Chahrmahal-va-bakhtiyari Province

Directory of Open Access Journals (Sweden)

M Gholami-Ahangaran

2012-08-01

Full Text Available Infectious bronchitis (IB disease is a viral contagious respiratory disease. The causing agent of this disease has several serotypes. In this study, 4/91 type of Infectious bronchitis (IB was identified. For this, tracheal samples were taken from 18 broiler chickens flocks having respiratory signs suspected to IB disease with one percent mortality in day. After RNA extraction from tissue samples in one step RT-PCR reaction, a fragment of S1 gene was amplified by common primers for all IB viruses. Then RT-PCR product was amplified for identification of 4/91(793/B type by type specific primers in Nested-PCR. Results showed, 11 out 18 flocks (61.1% were infected to IB that 45.45% of IB infected flocks were infected to 4/91 type. Therefore it seems 4/91 type of IB has role in forming and complexing of respiratory signs in broiler chickens suffering to respiratory syndrome in Chahrmahal-va-bakhtiyari province and it is necessary to give a suitable controlling strategy for prevention of 4/91 infection.

Corrosion Behavior and Oxide Film Formation of T91 Steel under Different Water Chemistry Operation Conditions

Energy Technology Data Exchange (ETDEWEB)

Zhang, D. Q.; Shi, C.; Li, J.; Gao, L. X. [Shanghai University of Electric Power, Shanghai (China); Lee, K. Y. [Dalian University of Technology, Dalian (China)

2017-02-15

The corrosion behavior of a ferritic/martensitic steel T91 exposed to an aqueous solution containing chloride and sulfate ions is investigated depending on the stimulated all-volatile treatment (AVT) and under oxygenated treatment (OT) conditions. The corrosion of T91 steel under OT condition is severe, while the corrosion under AVT condition is not. The co-existence of chloride and sulfate ions has antagonistic effect on the corrosion of T91 steel in both AVT and OT conditions. Unlike to corrosion resistance in the aqueous solution, OT pretreatment provides T91 steel lower oxidation-resistance than VAT pretreatment. From scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) and X-ray diffraction (XRD) analysis, the lower corrosion resistance in the aqueous solution by VAT conditions possibly is due to the formation of pits. In addition, the lower oxidation resistance of T91 steel pretreated by OT conditions is explained as follows: the cracks formed during the immersion under OT conditions accelerated peeling-off rate of the oxide film.

40 CFR 91.416 - Intake air flow measurement specifications.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Intake air flow measurement... Procedures § 91.416 Intake air flow measurement specifications. (a) If used, the engine intake air flow measurement method used must have a range large enough to accurately measure the air flow over the engine...

Radioactive decay of sup(91m)Nb

International Nuclear Information System (INIS)

Lakshminarayana, V.; Venkataratnam, S.; Rao, B.V.T.; Narasimham, K.L.

1987-01-01

The radioactive decay of sup(91m)Nb, produced by the reaction 89 Y(α, 2n), is studied using Ge(Li), HPGe and Si(Li) detectors. The K-conversion coefficient, αsub(K), of the 104.5 keV transition is determined accurately, for the first time, from the Nb Ksub(α) x-ray and 104.5 keV gamma-ray intensities. The experimental value of αsub(K) thus determined is 115(5), in agreement with the value expected for an M4 transition. (author)

A roadmap for tailoring the strength and ductility of ferritic/martensitic T91 steel via thermo-mechanical treatment

International Nuclear Information System (INIS)

Song, M.; Sun, C.; Fan, Z.; Chen, Y.; Zhu, R.; Yu, K.Y.; Hartwig, K.T.; Wang, H.; Zhang, X.

2016-01-01

Ferritic/martensitic (F/M) steels with high strength and excellent ductility are important candidate materials for the life extension of the current nuclear reactors and the design of next generation nuclear reactors. Recent studies show that equal channel angular extrusion (ECAE) was able to improve mechanical strength of ferritic T91 steels moderately. Here, we examine several strategies to further enhance the mechanical strength of T91 while maintaining its ductility. Certain thermo-mechanical treatment (TMT) processes enabled by combinations of ECAE, water quench, and tempering may lead to “ductile martensite” with exceptionally high strength in T91 steel. The evolution of microstructures and mechanical properties of T91 steel were investigated in detail, and transition carbides were identified in water quenched T91 steel. This study provides guidelines for tailoring the microstructure and mechanical properties of T91 steel via ECAE enabled TMT for an improved combination of strength and ductility.

The study of a Mg-rich epoxy primer for protection of AZ91D magnesium alloy

Energy Technology Data Exchange (ETDEWEB)

Lu Xiangyu [School of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029 (China); Zuo Yu, E-mail: zuoy@mail.buct.edu.c [School of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029 (China); Zhao Xuhui; Tang Yuming; Feng Xingguo [School of Materials Science and Engineering, Beijing University of Chemical Technology, Beijing 100029 (China)

2011-01-15

Research highlights: {yields} A Mg-rich epoxy primer was prepared by adding pure magnesium particles in epoxy coating. Cross scratch testing results showed that in 3% NaCl solution the Mg-rich primer showed better protection for AZ91D magnesium alloy than the same epoxy primer without Mg addition. {yields} The open circuit potential of AZ91D alloy in NaCl solution decreased after coated with Mg-rich coating, suggesting that cathodic protection effect of the Mg-rich coating on AZ91D alloy was present. {yields} EIS studies showed that during the immersion tests of AZ91D alloy with Mg-rich coating the magnesium particles in coating dissolved with the charge-transfer resistance R{sub ct} at the magnesium particle/coating interface decreased and the double-layer capacitance Q{sub dl} increased. While the coating resistance remained stable for a long time and corrosion of the AZ91D alloy substrate was obviously delayed. - Abstract: A Mg-rich epoxy primer was prepared by adding pure magnesium particles to an epoxy coating. The coating properties were studied with electrochemical impedance spectroscopy (EIS), scanning electronic microscopy (SEM) and X-ray diffraction (XRD). The Mg-rich primer showed better protection for AZ91D magnesium alloy than the same epoxy primer without Mg addition. The open circuit potential measurements showed cathodic protection effect of the Mg-rich primer on AZ91D alloy. Cross scratch testing showed that the Mg-rich primer provided better protection for the substrate than original epoxy coating. The precipitation of Mg(OH){sub 2} in the coating also provided some degree of barrier protection.

The study of a Mg-rich epoxy primer for protection of AZ91D magnesium alloy

International Nuclear Information System (INIS)

Lu Xiangyu; Zuo Yu; Zhao Xuhui; Tang Yuming; Feng Xingguo

2011-01-01

Research highlights: → A Mg-rich epoxy primer was prepared by adding pure magnesium particles in epoxy coating. Cross scratch testing results showed that in 3% NaCl solution the Mg-rich primer showed better protection for AZ91D magnesium alloy than the same epoxy primer without Mg addition. → The open circuit potential of AZ91D alloy in NaCl solution decreased after coated with Mg-rich coating, suggesting that cathodic protection effect of the Mg-rich coating on AZ91D alloy was present. → EIS studies showed that during the immersion tests of AZ91D alloy with Mg-rich coating the magnesium particles in coating dissolved with the charge-transfer resistance R ct at the magnesium particle/coating interface decreased and the double-layer capacitance Q dl increased. While the coating resistance remained stable for a long time and corrosion of the AZ91D alloy substrate was obviously delayed. - Abstract: A Mg-rich epoxy primer was prepared by adding pure magnesium particles to an epoxy coating. The coating properties were studied with electrochemical impedance spectroscopy (EIS), scanning electronic microscopy (SEM) and X-ray diffraction (XRD). The Mg-rich primer showed better protection for AZ91D magnesium alloy than the same epoxy primer without Mg addition. The open circuit potential measurements showed cathodic protection effect of the Mg-rich primer on AZ91D alloy. Cross scratch testing showed that the Mg-rich primer provided better protection for the substrate than original epoxy coating. The precipitation of Mg(OH) 2 in the coating also provided some degree of barrier protection.

C-12/C-13 Ratio in Ethane on Titan and Implications for Methane's Replenishment

Science.gov (United States)

Jennings, Donald E.; Romani, Paul N.; Bjoraker, Gordon L.; Sada, Pedro V.; Nixon, Conor A.; Lunsford, Allen W.; Boyle, Robert J.; Hesman, Brigette E.; McCabe, George H.

2009-01-01

The C-12/C-13 abundance ratio in ethane in the atmosphere of Titan has been measured at 822 cm(sup -1) from high spectral resolution ground-based observations. The value 89(8), coincides with the telluric standard and also agrees with the ratio seen in the outer planets. It is almost identical to the result for ethane on Titan found by the composite infrared spectrometer (CIRS) on Cassini. The C-12/C-13 ratio for ethane is higher than the ratio measured in atmospheric methane by Cassini/Huygens GCMS, 82.3(l), representing an enrichment of C-12 in the ethane that might be explained by a kinetic isotope effect of approximately 1.1 in the formation of methyl radicals. If methane is being continuously resupplied to balance photochemical destruction, then we expect the isotopic composition in the ethane product to equilibrate at close to the same C-12/C-13 ratio as that in the supply. The telluric value of the ratio in ethane then implies that the methane reservoir is primordial.

Measuring Dilution and Wear for Laser Cladding of Stellite 6 Produced on a P91 Steel Substrate using Two Different Heat Inputs

Directory of Open Access Journals (Sweden)

Kusmoko Alain

2016-01-01

Full Text Available Stellite 6 was deposited by laser cladding on a P91 substrate with energy inputs of 1 kW (P91-1 and 1.8 kW (P91–1.8. The chemical compositions, microstructures and surface roughnesses of these coatings were characterized by atomic absorption spectroscopy, scanning electron microscopy and atomic force microscopy. The microhardness of the coatings was measured and the wear mechanism of the coatings was evaluated using a pin-on-plate (reciprocating wear testing machine. The results showed less cracking and pore development for Stellite 6 coatings applied to the P91 steel substrate with the lower heat input (P91–1. Further, the Stellite coating for P91-1 was significantly harder than that obtained for P91–1.8. The wear test results indicated that the weight loss for P91–1 was much lower than for P91–1.8. The surface topography data indicated that the surface roughness for P91-1 was much lower than for P91–1.8. The measurements of dilution and carbon content showed that P91–1 has lower dilution and higher concentration of carbon than P91–1.8. It is concluded that the lower hardness of the coating for P91–1.8, together with the softer underlying substrate structure, markedly reduced the wear resistance of the Stellite 6 coating and the lower hardness of the coating for P91-1.8 was due to higher level of dilution and lower concentration of carbon.

TEM Characterization of Helium Bubbles in T91 and MNHS Steels Implanted with 200 keV He Ions at Different Temperatures

International Nuclear Information System (INIS)

Wang Ji; Gao Xing; Wang Zhi-Guang; Wei Kong-Fang; Yao Cun-Feng; Cui Ming-Huan; Sun Jian-Rong; Li Bing-Sheng; Pang Li-Long; Zhu Ya-Bin; Luo Peng; Chang Hai-Long; Zhang Hong-Peng; Zhu Hui-Ping; Wang Dong; Du Yang-Yang; Xie Er-Qing

2015-01-01

Modified novel high silicon steel (MNHS, a newly developed reduced-activation martensitic alloy) and commercial alloy T91 are implanted with 200 keV He"2"+ ions to a dose of 5 × 10"2"0 ions/m"2 at 300, 450 and 550°C. Transmission electron microscopy (TEM) is used to characterize the size and morphology of He bubbles. With the increase of the implantation temperature, TEM observations indicate that bubbles increase in size and the proportion of ‘brick shaped’ cuboid bubbles increases while the proportion of polyhedral bubbles decreases in both the steel samples. For the samples implanted at the same temperature, the average size of He bubbles in MNHS is smaller than that in T91. This might be due to the abundance of boundaries and precipitates in MNHS, which provide additional sites for the trapping of He atoms, thus reduce the susceptibility of MNHS to He embrittlement. (paper)

Understanding the application of OSC policy 9.1 during a takeover transaction

International Nuclear Information System (INIS)

Hayduk, M.F.; Rasmuson, M.A.

1998-01-01

Legal aspects of ownership of publicly traded companies in Canada are explored, with particular emphasis on transactions involving 'related parties'. In this context, Policy 9.1 of the Ontario Securities Commission is examined. The policy seeks to enhance minority shareholder protection by providing for independent valuation, majority of minority approval, enhanced disclosure and review of substantial transactions by independent directors. This paper focuses on four types of transactions governed by Policy 9.1, i.e. insider bids, issuer bids, going private transactions, related party transactions and the recent proposed rule reformulation proposed by the Ontario Securities Commission (OSC)

Radioactive decay of sup(91m)Nb

Energy Technology Data Exchange (ETDEWEB)

Lakshminarayana, V.; Venkataratnam, S.; Rao, B.V.T.; Narasimham, K.L.; Chintalapudi, S.N.

1987-08-01

The radioactive decay of sup(91m)Nb, produced by the reaction /sup 89/Y(..cap alpha.., 2n), is studied using Ge(Li), HPGe and Si(Li) detectors. The K-conversion coefficient, ..cap alpha..sub(K), of the 104.5 keV transition is determined accurately, for the first time, from the Nb Ksub(..cap alpha..) x-ray and 104.5 keV gamma-ray intensities. The experimental value of ..cap alpha..sub(K) thus determined is 115(5), in agreement with the value expected for an M4 transition.

Exploration of the viscosity temperature dependences and microstructure of magnesium-based commercial alloy AZ91D with small additions of calcium

International Nuclear Information System (INIS)

Abaturov, I S; Popel, P S; Brodova, I G; Astafiev, V V; Li Peijie

2008-01-01

The technique of rotating oscillation damping of a crucible filled in with the melt under investigation was used for measurement of viscosity of the Mg-based AZ91D commercial alloy with various additions of calcium. The viscosity was measured in liquid state in temperature interval from 600 up to 840 deg. C. The comparative metallographic investigation of the structure of samples with calcium content of 0.0, 0.4, 0.6 and 0.8 wt.% which were crystallized just after re-melting at the temperature of 640 deg. C and after heating in liquid state up to 850 deg. C were made. It was shown that the thermal treatment of samples in liquid state is accompanied by considerable changes in the cast structure that forms after the crystallization of the samples

Increased Retinal Expression of the Pro-Angiogenic Receptor GPR91 via BMP6 in a Mouse Model of Juvenile Hemochromatosis.

Science.gov (United States)

Arjunan, Pachiappan; Gnanaprakasam, Jaya P; Ananth, Sudha; Romej, Michelle A; Rajalakshmi, Veeranan-Karmegam; Prasad, Puttur D; Martin, Pamela M; Gurusamy, Mariappan; Thangaraju, Muthusamy; Bhutia, Yangzom D; Ganapathy, Vadivel

2016-04-01

Hemochromatosis, an iron-overload disease, occurs as adult and juvenile types. Mutations in hemojuvelin (HJV), an iron-regulatory protein and a bone morphogenetic protein (BMP) coreceptor, underlie most of the juvenile type. Hjv(-/-) mice accumulate excess iron in retina and exhibit aberrant vascularization and angiomas. A succinate receptor, GPR91, is pro-angiogenic in retina. We hypothesized that Hjv(-/-) retinas have increased BMP signaling and increased GPR91 expression as the basis of angiomas. Expression of GPR91 was examined by qPCR, immunofluorescence, and Western blot in wild-type and Hjv(-/-) mouse retinas and pRPE cells. Influence of excess iron and BMP6 on GPR91 expression was investigated in ARPE-19 cells, and wild-type and Hjv(-/-) pRPE cells. Succinate was used to activate GPR91 and determine the effects of GPR91 signaling on VEGF expression. Signaling of BMP6 was studied by the expression of Smad1/5/8 and pSmad4, and the BMP-target gene Id1. The interaction of pSmad4 with GPR91 promoter was studied by ChIP. Expression of GPR91 was higher in Hjv(-/-) retinas and RPE than in wild-type counterparts. Unexpectedly, BMP signaling was increased, not decreased, in Hjv(-/-) retinas and RPE. Bone morphogenetic protein 6 induced GPR91 in RPE, suggesting that increased BMP signaling in Hjv(-/-) retinas was likely responsible for GPR91 upregulation. Exposure of RPE to excess iron and succinate as well as BMP6 and succinate increased VEGF expression. Bone morphogenetic protein 6 promoted the interaction of pSmad4 with GPR91 promoter in RPE. G-protein-coupled receptor 91 is a BMP6 target and Hjv deletion enhances BMP signaling in retina, thus underscoring a role for excess iron and hemochromatosis in abnormal retinal vascularization.

Annual report and accounts 1990/91

International Nuclear Information System (INIS)

1991-01-01

In this Annual Report for 1990/91, British Nuclear Fuels Limited (BNFL) considers the year's results financially and in terms of scientific innovation. BNFL produces nuclear fuel for all United Kingdom (UK) power stations and is thus, indirectly responsible for the 20% of electricity generated by nuclear power. Since the privatization of the electricity generating industry in the United Kingdom, nuclear power has had an unresolved financial and commercial status. BNFL has still not considered negotiations with their two UK customers, Nuclear Electric and Scottish Nuclear so accounts presented include assumptions about fixed price contracts. Public relations has become a major issue for BNFL and the work of the Sellafield Visitors Centre is described in detail. (UK)

7 CFR 160.91 - Meaning of words “pine” and “pine tree.”

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Meaning of words âpineâ and âpine tree.â 160.91... REGULATIONS AND STANDARDS FOR NAVAL STORES Labeling, Advertising and Packing § 160.91 Meaning of words “pine” and “pine tree.” The words “pine” or “pine tree,” when used to designate the source of spirits of...

7 CFR Appendix C to Part 220 - Child Nutrition (CN) Labeling Program

Science.gov (United States)

2010-01-01

... product label that contains a CN label statement and CN logo as defined in paragraph 3 (b) and (c) below... statement” as defined in paragraph 3(c). EC17SE91.003 (c) The “CN label statement” includes the following... alternate product toward the meat/meat alternate, bread/bread alternate, and/or vegetable/fruit component of...

Use of hypoxia imaging agent 99mTc-HL91 in rat cerebral ischemia models

International Nuclear Information System (INIS)

Zhou Ying; Qu Wanying; Li Meng; Chen Fang; Yao Zhiming; Zhu Ming; Zhu Lin

1999-01-01

Objective: To explore the possibility of diagnosis for cerebrovascular disease by a novel synthetic hypoxia agent 99m Tc-HL91 used in rat cerebral ischemia models. Methods: Pharmacological experiments of 99m Tc-HL91 were carried out including common properties, radiochemical purity, stability in vitro, anomalous toxicity test and biodistribution in mice. Fifteen cerebral ischemic rat models were established and received 99m Tc-HL91 scintigraphy. Results: 1) HL91 kits were labelled with 99m Tc easily and showed high radiochemical purity and stability. 2) Rapid clearance in blood, heart and lungs and high activity in liver, kidneys and intestines were observed. Relatively low uptake in brain was identified. 3) The radioactivity in ischemic brain tissue increased significantly at 4h postinjection in both rat images and isolated brain images. 4) The radioactivity ratios of lesion to normal brain tissue by drawing ROIs in isolated brain planar images were 0.98 +- 0.06, 0.99 +- 0.05, 1.29 +- 0.03, 1.56 +- 0.14 and 1.66 +- 0.06 at 1,2,4,8 and 12 h postinjection, respectively. There were significant differences among all groups except for 1 h and 2 h, 8 h and 12 h postinjection (P 99m Tc-HL91 in the hypoxic, ischemic brain tissue have been proved. It is appropriate to perform imaging at 4 h postinjection

Rubella Deaf-Blind Child: Implications of Psychological Assessment. Proceedings.

Science.gov (United States)

Rouin, Carole

Presented are proceedings of a conference involving authorities in testing and evaluating the blind, deaf, and deaf-blind. In a paper titled "Psychological Implications of Assessing the Deaf", C. Goetzinger discusses references used in audiology, anatomy and physiology of the ear, degrees of hearing impairment, and implications of the various…

Toxicity of inhaled 91YCl3 in Beagle dogs. XV

International Nuclear Information System (INIS)

Hahn, F.F.; Muggenburg, B.A.; Boecker, B.B.; Jones, R.K.; Kusewitt, D.F.; McClellan, R.O.; Pickrell, J.A.

1981-01-01

The metabolism, dosimetry and biological effects of inhaled 91 YCl 3 in Beagle dogs are being studied. Forty-two dogs with initial 91 Y body burdens from 14 to 1300 μCi per kilogram body weight and 12 control dogs are being maintained for lifetime observation. Four additional dogs with a mean initial body burden of 180 μCi per kilogram body weight were placed in a sacrifice study. Forty-three of the exposed dogs and 11 of the control dogs have died. Dogs with the highest initial body burdens died with bone marrow damage and pancytopenia. Three dogs died with nasal cavity carcinomas, three dogs died with pulmonary carcinomas and one dog died with hepatic hemangiosarcoma; these cancers all appeared to be related to radiation injury. Control dogs died of miscellaneous neoplastic and chronic diseases. Observations are continuing on three surviving exposed dogs and one surviving unexposed dog

Utilization, at hot temperature, of an ion exchange resin column. Application to the separation of {sup 91}Y - {sup 147}Pm; Utilisation, a chaud, dune colonne de resine echangeuse d'ions. Application a la separation {sup 91} Y - {sup 147} Pm

Energy Technology Data Exchange (ETDEWEB)

Bloch, G; Cohen, P [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1955-07-01

The fission products with long period can be separate by fractional elution, to ambient temperature, on column of an ion exchange resin. The separation of the couple {sup 91}Y + {sup 147}Pm being particularly long, we tried to improve it while using a heated column. For this study, we specified the effect of the temperature on the factor of separation: {alpha}, ratio between the Kd partition coefficients of {sup 147}Pm and {sup 91}Y: {alpha}= Kd ({sup 147}Pm) / Kd ({sup 91}Y). (M.B.) [French] Les produits de fission a periode longue peuvent etre separes par elution fractionnee, a temperature ambiante, sur colonne de resine echangeuse d'ions. La separation du couple {sup 91}Y + {sup 147}Pm etant particulerement longue, nous avons cherche a l'ameliorer en utilisant une colonne chauffee. A l'occasion de cette etude, nous avons ete amenes a preciser l'effet de la temperature sur le facteur de separation: {alpha}, rapport entre les coefficients de partage Kd de {sup 147}Pm et {sup 91}Y: {alpha} = Kd({sup 147}Pm) / Kd({sup 91}Y). (M.B.)

Dicty_cDB: Contig-U05238-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available ase subunit I (... 34 0.91 3 ( EF104618 ) Agrodiaetus dagmara voucher VL04A001 cytochrome o... 34 0.91 3 ( A...askhabadicus voucher VL03F5... 34 0.91 3 ( AY954006 ) Agrodiaetus rjabovi ssp. NP

Radiation response of alloy T91 at damage levels up to 1000 peak dpa

Energy Technology Data Exchange (ETDEWEB)

Gigax, J. G.; Chen, T.; Kim, Hyosim; Wang, J.; Price, L. M.; Aydogan, E.; Maloy, S. A.; Schreiber, D. K.; Toloczko, M. B.; Garner, F. A.; Shao, Lin

2016-12-01

Ferritic/martensitic alloys are required for advanced reactor components to survive 500e600 neutroninduced dpa. Ion-induced void swelling of ferritic/martensitic alloy T91 in the quenched and tempered condition has been studied using a defocused, non-rastered 3.5 MeV Fe-ion beam at 475 C to produce damage levels up to 1000 peak displacements per atom (dpa). The high peak damage level of 1000 dpa is required to reach 500e600 dpa level due to injected interstitial suppression of void nucleation in the peak dpa region, requiring data extraction closer to the surface at lower dpa levels. At a relatively low peak damage level of 250 dpa, voids began to develop, appearing first in the near-surface region. With increasing ion fluence, swelling was observed deeper in the specimen, but remained completely suppressed in the back half of the ion range, even at 1000 peak dpa. The local differences in dpa rate in the front half of the ion range induce an “internal temperature shift” that strongly influences the onset of swelling, with shorter transient regimes resulting from lower dpa rates, in agreement not only with observations in neutron irradiation studies but also in various ion irradiations. Swelling was accompanied by radiation-induced precipitation of Cu-rich and Si, Ni, Mn-rich phases were observed by atom probe tomography, indicating concurrent microchemical evolution was in progress. In comparison to other ferritic/martensitic alloys during ion irradiation, T91 exhibits good swelling resistance with a swelling incubation period of about 400 local dpa.

Zr-92(d,p)Zr-93 and Zr-92(d,t)Zr-91

Science.gov (United States)

Baron, N.; Fink, C. L.; Christensen, P. R.; Nickels, J.; Torsteinsen, T.

1972-01-01

The structures of Zr-93 and Zr-91 were studied by the stripping reaction Zr-92(d,p)Zr-93 and the pick-up reaction Zr-92(d,t)Zr-91 using 13 MeV incident deuterons. The reaction product particles were detected by counter telescope. Typical spectra from the reactions were analyzed by a nonlinear least squares peak fitting program which included a background search. Spin and parity assignments to observed excited levels were made by comparing experimental angular distributions with distorted wave Born approximation calculations.

7 CFR Appendix C to Part 210 - Child Nutrition Labeling Program

Science.gov (United States)

2010-01-01

... defined in paragraph 3 (b) and (c) below. (b) The “CN logo” (as shown below) is a distinct border which is used around the edges of a “CN label statement” as defined in paragraph 3(c). EC17SE91.000 (c) The “CN... contribution of a specific portion of a meat/meat alternate product toward the meat/meat alternate, bread/bread...

40 CFR 91.906 - Responsibility under other legal provisions preserved.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Responsibility under other legal... Defect Reporting Requirements, Voluntary Emission Recall Program § 91.906 Responsibility under other legal provisions preserved. The filing of any report under the provisions of this subpart will not...

Effect of Nd on the corrosion behaviour of AM50 and AZ91D magnesium alloys in 3.5 wt.% NaCl solution

Energy Technology Data Exchange (ETDEWEB)

Arrabal, R., E-mail: raularrabal@quim.ucm.es [Departamento de Ciencia de Materiales, Facultad de Ciencias Quimicas, Universidad Complutense, 28040 Madrid (Spain); Pardo, A.; Merino, M.C.; Mohedano, M.; Casajus, P. [Departamento de Ciencia de Materiales, Facultad de Ciencias Quimicas, Universidad Complutense, 28040 Madrid (Spain); Paucar, K. [Gabinete de Corrosion, Facultad de Ingenieria Quimica y Textil, Universidad Nacional de Ingenieria, Cod. Postal 25, Lima (Peru); Garces, G. [Centro Nacional de Investigaciones Metalurgicas CSIC, Avda. Gregorio del Amo 8, 28040 Madrid (Spain)

2012-02-15

Highlights: Black-Right-Pointing-Pointer Nd addition modified the microstructure of AM50 and AZ91D magnesium alloys. Black-Right-Pointing-Pointer Volume of {beta}-Mg{sub 17}Al{sub 12} phase was reduced and Al{sub 2}Nd/Al-Mn-Nd particles were formed. Black-Right-Pointing-Pointer Nd-containing intermetallics revealed lower potential than Al-Mn inclusions. Black-Right-Pointing-Pointer 0.7-0.8 wt.% Nd reduced the corrosion rate of AM50 and AZ91D alloys by 90%. - Abstract: The corrosion performance of AM50 and AZ91D alloys containing up to 1.5 wt.% Nd was investigated by electrochemical and gravimetric measurements in 3.5 wt.% NaCl at 22 Degree-Sign C. The alloys were characterized by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD) and surface potential maps. In Nd-containing alloys, formation of Al{sub 2}Nd and Al-Mn-Nd intermetallic compounds reduced the volume fraction and modified the morphology of the {beta}-Mg{sub 17}Al{sub 12} phase. The addition of Nd improved the corrosion resistance of the alloys due to increased passivity of the surface film and suppression of micro-galvanic couples.

CDC91L1 (PIG-U) is a newly discovered oncogene in human bladder cancer.

NARCIS (Netherlands)

Guo, Z.; Linn, J.F.; Wu, G.; Anzick, S.L.; Eisenberger, C.F.; Halachmi, S.; Cohen, Y.; Fomenkov, A.; Hoque, M.O.; Okami, K.; Steiner, G.; Engles, J.M.; Osada, M.; Moon, C.; Ratovitski, E.; Trent, J.M.; Meltzer, P.S.; Westra, W.H.; Kiemeney, L.A.L.M.; Schoenberg, M.P.; Sidransky, D.; Trink, B.

2004-01-01

Genomic amplification at 20q11-13 is a common event in human cancers. We isolated a germline translocation breakpoint at 20q11 from a bladder cancer patient. We identified CDC91L1, the gene encoding CDC91L1 (also called phosphatidylinositol glycan class U (PIG-U), a transamidase complex unit in the

The Atom in a Molecule: Implications for Molecular Structure and Properties

Science.gov (United States)

2016-05-23

Briefing Charts 3. DATES COVERED (From - To) 01 February 2016 – 23 May 2016 4. TITLE AND SUBTITLE The atom in a molecule: Implications for molecular...For presentation at American Physical Society - Division of Atomic , Molecular, and Optical Physics (May 2016) PA Case Number: #16075; Clearance Date...10 Energy (eV) R C--H (au) R C--H(au) The Atom in a Molecule: Implications for Molecular Structures and Properties P. W. Langhoff, Chemistry

21 CFR 1301.91 - Employee responsibility to report drug diversion.

Science.gov (United States)

2010-04-01

... REGISTRATION OF MANUFACTURERS, DISTRIBUTORS, AND DISPENSERS OF CONTROLLED SUBSTANCES Employee Screening-Non-Practitioners § 1301.91 Employee responsibility to report drug diversion. Reports of drug diversion by fellow... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Employee responsibility to report drug diversion...

Equation of State of Fe3C and Implications for the Carbon Content of Earth's Core

Science.gov (United States)

Davis, A.; Brauser, N.; Thompson, E. C.; Chidester, B.; Greenberg, E.; Prakapenka, V. B.; Campbell, A.

2017-12-01

Carbon is a common component in protoplanetary cores, as represented by iron meteorites. Therefore, along with silicon, oxygen, and other light elements, it is likely to be an alloying component with iron in Earth's core. Previous studies of the densities of iron carbides have not reached the combined pressure and temperature conditions relevant to Earth's core. To better understand the geophysical implications of carbon addition to Earth's core, we report P-V-T measurements of Fe3C to pressures and temperatures exceeding 110 GPa and 2500 K, using synchrotron X-ray diffraction in a laser heated diamond anvil cell. Fitting these measurements to an equation of state and assuming 1.5% density change upon melting and a 4000 K core-mantle boundary temperature, we report a value of 6 wt% carbon necessary to match the PREM density in the outer core. This value should be considered an upper bound due to the likely presence of other light elements.

14 CFR 91.1055 - Pilot operating limitations and pairing requirement.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Pilot operating limitations and pairing... Ownership Operations Program Management § 91.1055 Pilot operating limitations and pairing requirement. (a... aircraft being flown, and the pilot in command is not an appropriately qualified check pilot, the pilot in...

14 CFR 91.1047 - Drug and alcohol misuse education program.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Drug and alcohol misuse education program... Ownership Operations Program Management § 91.1047 Drug and alcohol misuse education program. (a) Each... instructor, or aircraft maintenance duties with drug and alcohol misuse education. (b) No program manager may...

45 CFR 91.18 - Age distinctions contained in HHS regulations.

Science.gov (United States)

2010-10-01

....18 Section 91.18 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION... distinctions contained in a rule or regulation issued by HHS shall be presumed to be necessary to the achievement of a statutory objective of the program or activity to which the rule or regulation applies...

Dicty_cDB: Contig-U06595-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available ilus oremlandii OhILAs, ... 32 9.1 FJ563415_1( FJ563415 |pid:none) Rodriguezia arevaloi voucher Willi... 32 ...TCC ... 32 9.1 (Q8T305) RecName: Full=Paramyosin; &AJ439882_1( AJ439882 |pid:none) 32 9.1 FJ563162_1( FJ563162 |pid:none) Rodriguez

Dicty_cDB: Contig-U04551-1 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available Methods for generating databases and databases fo... 42 9.1 1 ( DD019107 ) METHODS FOR GENERATING DATABAS...ES AND FOR IDENTIFY... 42 9.1 1 ( DD019106 ) METHODS FOR GENERATING DATABASES AND F...0417 ) METHODS FOR GENERATING DATABASES AND FOR IDENTIFY... 42 9.1 1 ( BD350416 ) METHODS FOR GENERATING DATABASE

Effectiveness of Ti-micro alloying in relation to cooling rate on corrosion of AZ91 Mg alloy

International Nuclear Information System (INIS)

Candan, S.; Celik, M.; Candan, E.

2016-01-01

In this study, micro Ti-alloyed AZ91 Mg alloys (AZ91 + 0.5wt.%Ti) have been investigated in order to clarify effectiveness of micro alloying and/or cooling rate on their corrosion properties. Molten alloys were solidified under various cooling rates by using four stage step mold. The microstructural investigations were carried out by using scanning electron microscopy (SEM). Corrosion behaviors of the alloys were evaluated by means of immersion and electrochemical polarization tests in 3.5% NaCl solution. Results showed that the Mg 17 Al 12 (β) intermetallic phase in the microstructure of AZ91 Mg alloy formed as a net-like structure. The Ti addition has reduced the distribution and continuity of β intermetallic phase and its morphology has emerged as fully divorced eutectic. Compared to AZ91 alloy, the effect of the cooling rate in Ti-added alloy on the grain size was less pronounced. When AZ91 and its Ti-added alloys were compared under the same cooling conditions, the Ti addition showed notably high corrosion resistance. Electrochemical test results showed that while I corr values of AZ91 decrease with the increase in the cooling rate, the effect of the cooling rate on I corr values was much lower in the Ti-added alloy. The corrosion resistance of AZ91 Mg alloy was sensitive towards the cooling rates while Ti-added alloy was not affected much from the cooling conditions. - Highlights: • Effect the cooling rate on grain size was less pronounced in the Ti-added alloy. • The morphology of the β phase transformed into fully divorced eutectics. • Ti addition exhibited significantly higher corrosion resistance. • Ti micro alloying is more effective than faster cooling of the alloy on corrosion.

A biodegradable AZ91 magnesium alloy coated with a thin nanostructured hydroxyapatite for improving the corrosion resistance

Energy Technology Data Exchange (ETDEWEB)

Mukhametkaliyev, T.M.; Surmeneva, M.A. [National Research Tomsk Polytechnic University, 634050, Lenin Avenue 43, Tomsk (Russian Federation); Vladescu, A. [National Research Tomsk Polytechnic University, 634050, Lenin Avenue 43, Tomsk (Russian Federation); National Institute for Optoelectronics, 409 Atomistilor St., RO77125 Magurele (Romania); Cotrut, C.M. [National Research Tomsk Polytechnic University, 634050, Lenin Avenue 43, Tomsk (Russian Federation); Politehnica University of Bucharest, 313 Spl. Independentei, Bucharest (Romania); Braic, M.; Dinu, M. [National Institute for Optoelectronics, 409 Atomistilor St., RO77125 Magurele (Romania); Vranceanu, M.D. [Politehnica University of Bucharest, 313 Spl. Independentei, Bucharest (Romania); Pana, I. [National Institute for Optoelectronics, 409 Atomistilor St., RO77125 Magurele (Romania); Faculty of Physics, Bucharest University, 405 Atomistilor St., RO77125 Magurele (Romania); Mueller, M. [Fraunhofer Institute for Interfacial Engineering and Biotechnology IGB, 70569 Stuttgart (Germany); Surmenev, R.A., E-mail: rsurmenev@gmail.com [National Research Tomsk Polytechnic University, 634050, Lenin Avenue 43, Tomsk (Russian Federation)

2017-06-01

The main aim of this study was to investigate the properties of an AZ91 alloy coated with nanostructured hydroxyapatite (HA) prepared by radio frequency (RF) magnetron sputtering. The bioactivity and biomineralization of the AZ91 magnesium alloy coated with HA were investigated in simulated body fluid (SBF) via an in vitro test. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) analyses were performed. The samples were immersed in SBF to study the ability of the surface to promote the formation of an apatite layer as well as corrosion resistance and mass change of the HA-coated AZ91 alloy. Electrochemical tests were performed to estimate the corrosion behaviour of HA-coated and uncoated samples. The results revealed the capability of the HA coating to significantly improve the corrosion resistance of the uncoated AZ91 alloy. - Highlights: • The nanostructured HA layer allows to control the degradation rate of the AZ91 alloy. • The HA coating significantly reduces the corrosion current density. • The HA coating significantly improves the polarization resistance in vitro. • The RF magnetron deposited HA coating promotes calcium-phosphate precipitation in SBF.

A biodegradable AZ91 magnesium alloy coated with a thin nanostructured hydroxyapatite for improving the corrosion resistance

International Nuclear Information System (INIS)

Mukhametkaliyev, T.M.; Surmeneva, M.A.; Vladescu, A.; Cotrut, C.M.; Braic, M.; Dinu, M.; Vranceanu, M.D.; Pana, I.; Mueller, M.; Surmenev, R.A.

2017-01-01

The main aim of this study was to investigate the properties of an AZ91 alloy coated with nanostructured hydroxyapatite (HA) prepared by radio frequency (RF) magnetron sputtering. The bioactivity and biomineralization of the AZ91 magnesium alloy coated with HA were investigated in simulated body fluid (SBF) via an in vitro test. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) analyses were performed. The samples were immersed in SBF to study the ability of the surface to promote the formation of an apatite layer as well as corrosion resistance and mass change of the HA-coated AZ91 alloy. Electrochemical tests were performed to estimate the corrosion behaviour of HA-coated and uncoated samples. The results revealed the capability of the HA coating to significantly improve the corrosion resistance of the uncoated AZ91 alloy. - Highlights: • The nanostructured HA layer allows to control the degradation rate of the AZ91 alloy. • The HA coating significantly reduces the corrosion current density. • The HA coating significantly improves the polarization resistance in vitro. • The RF magnetron deposited HA coating promotes calcium-phosphate precipitation in SBF.

14 CFR 91.138 - Temporary flight restrictions in national disaster areas in the State of Hawaii.

Science.gov (United States)

2010-01-01

... disaster areas in the State of Hawaii. 91.138 Section 91.138 Aeronautics and Space FEDERAL AVIATION... areas in the State of Hawaii. (a) When the Administrator has determined, pursuant to a request and justification provided by the Governor of the State of Hawaii, or the Governor's designee, that an inhabited...

Ion-irradiation-induced microstructural modifications in ferritic/martensitic steel T91

Energy Technology Data Exchange (ETDEWEB)

Liu, Xiang; Miao, Yinbin; Li, Meimei; Kirk, Marquis A.; Maloy, Stuart A.; Stubbins, James F.

2017-07-01

In this paper, in situ transmission electron microscopy investigations were carried out to study the microstructural evolution of ferritic/martensitic steel T91 under 1 MeV Krypton ion irradiation up to 4.2 x 10(15) ions/cm(2) at 573 K, 673 K, and 773 K. At 573 K, grown-in defects are strongly modified by black dot loops, and dislocation networks together with black-dot loops were observed after irradiation. At 673 K and 773 K, grown-in defects are only partially modified by dislocation loops; isolated loops and dislocation segments were commonly found after irradiation. Post irradiation examination indicates that at 4.2 x 1015 ions/cm(2), about 51% of the loops were a(0)/2 < 111 > type for the 673 K irradiation, and the dominant loop type was a(0)< 100 > for the 773 K irradiation. Finally, a dispersed barrier hardening model was employed to estimate the change in yield strength, and the calculated ion data were found to follow the similar trend as the existing neutron data with an offset of 100-150 MPa. (C) 2017 Elsevier B.V. All rights reserved.

Midlatitude atmospheric circulation responses under 1.5 and 2.0 °C warming and implications for regional impacts

Science.gov (United States)

Li, Camille; Michel, Clio; Seland Graff, Lise; Bethke, Ingo; Zappa, Giuseppe; Bracegirdle, Thomas J.; Fischer, Erich; Harvey, Ben J.; Iversen, Trond; King, Martin P.; Krishnan, Harinarayan; Lierhammer, Ludwig; Mitchell, Daniel; Scinocca, John; Shiogama, Hideo; Stone, Dáithí A.; Wettstein, Justin J.

2018-04-01

This study investigates the global response of the midlatitude atmospheric circulation to 1.5 and 2.0 °C of warming using the HAPPI (Half a degree Additional warming, Prognosis and Projected Impacts) ensemble, with a focus on the winter season. Characterising and understanding this response is critical for accurately assessing the near-term regional impacts of climate change and the benefits of limiting warming to 1.5 °C above pre-industrial levels, as advocated by the Paris Agreement of the United Nations Framework Convention on Climate Change (UNFCCC). The HAPPI experimental design allows an assessment of uncertainty in the circulation response due to model dependence and internal variability. Internal variability is found to dominate the multi-model mean response of the jet streams, storm tracks, and stationary waves across most of the midlatitudes; larger signals in these features are mostly consistent with those seen in more strongly forced warming scenarios. Signals that emerge in the 1.5 °C experiment are a weakening of storm activity over North America, an inland shift of the North American stationary ridge, an equatorward shift of the North Pacific jet exit, and an equatorward intensification of the South Pacific jet. Signals that emerge under an additional 0.5 °C of warming include a poleward shift of the North Atlantic jet exit, an eastward extension of the North Atlantic storm track, and an intensification on the flanks of the Southern Hemisphere storm track. Case studies explore the implications of these circulation responses for precipitation impacts in the Mediterranean, in western Europe, and on the North American west coast, paying particular attention to possible outcomes at the tails of the response distributions. For example, the projected weakening of the Mediterranean storm track emerges in the 2 °C warmer world, with exceptionally dry decades becoming 5 times more likely.

IPCC Reasons for Concern Regarding Climate Change Risks: Implications for 1.5 and 2 C Targets

Science.gov (United States)

O'Neill, B. C.; Oppenheimer, M.

2016-12-01

The Reasons for Concern (RFC) framework communicates scientific understanding about risks in relation to varying levels of climate change. The framework, which has been a cornerstone of the Intergovernmental Panel on Climate Change (IPCC) assessments since the Third Assessment Report, aggregates global risks into five categories as a function of global mean temperature change (GMT). The RFC framework was developed to inform discussions relevant to implementation of Article 2 of the UN Framework Convention on Climate Change (UNFCCC). Article 2 presents the Convention's long-term objective of avoiding "dangerous anthropogenic interference with the climate system." The RFC framework and the associated "Burning Embers" diagram illustrating authors' risk judgments have since been widely discussed and used to inform policy decisions. For example, they informed a recent dialog between Parties to the UNFCCC and experts on the adequacy of the long-term goal of avoiding a warming of 2°C relative to pre-industrial, contributing to a strengthening of that goal in the recent Paris Agreement. We draw on a new review and update of the RFC's conceptual basis and the risk judgments made in the most recent IPCC report to discuss their implications for risks associated with GMT targets of 1.5 C and 2 C adopted in the Paris Agreement. In general, the RFCs imply that continued high emissions of greenhouse gases (GHGs) would lead to high or very high risk of severe, widespread, and in some cases irreversible climate change impacts within this century. At 2°C above preindustrial, High risks are based on increasing risks to Arctic and coral reef systems, as well as increasing species extinction risks that undermine ecosystems (RFC 1), and projected increasing magnitude and likelihood of extreme weather events (RFC 2). Moderate-to-High risks are based on projections of increasing risks to crop production and water resources (RFC 3), and to the risks associated with ice sheet

AC impedance spectroscopy study of the corrosion behavior of an AZ91 magnesium alloy in 0.1 M sodium sulfate solution

International Nuclear Information System (INIS)

Chen, Jian; Wang, Jianqiu; Han, Enhou; Dong, Junhua; Ke, Wei

2007-01-01

The corrosion behavior of an AZ91 magnesium alloy in 0.1 M sodium sulfate solution at the corrosion potential (E corr ) was investigated using electrochemical impedance spectroscopy (EIS), environmental scanning electron microscopy (ESEM), energy dispersive X-ray spectroscopy (EDS), and X-ray photoelectron spectroscopy (XPS). The results showed that when the immersion time was less than 18th, general corrosion occurred on the surface and the main corrosion products were hydroxides and sulfates. The film coverage effect was the main mechanism for the corrosion process of AZ91 alloy. At this stage, the matrix had a better corrosion resistance. With the increasing immersion time, pitting occurred on the surface. At this stage, the corrosion process was controlled by three surface state variables: the area fraction θ 1 of the region controlled by the formation of Mg(OH) 2 , the area fraction θ 2 of the region controlled by the precipitation of MgAl 2 (SO 4 ) 4 .2H 2 O, and the metastable Mg + concentration C m

Radiation response of alloy T91 at damage levels up to 1000 peak dpa

Energy Technology Data Exchange (ETDEWEB)

Gigax, J.G., E-mail: gigaxj@tamu.edu [Department of Nuclear Engineering, Texas A& M University, College Station, TX 77840 (United States); Chen, T.; Kim, Hyosim [Department of Nuclear Engineering, Texas A& M University, College Station, TX 77840 (United States); Wang, J. [Department of Nuclear Engineering, Texas A& M University, College Station, TX 77840 (United States); Pacific Northwest National Lab, Richland, WA 99354 (United States); Price, L.M. [Department of Nuclear Engineering, Texas A& M University, College Station, TX 77840 (United States); Aydogan, E. [Department of Nuclear Engineering, Texas A& M University, College Station, TX 77840 (United States); Los Alamos National Lab, Los Alamos, NM 87545 (United States); Maloy, S.A. [Los Alamos National Lab, Los Alamos, NM 87545 (United States); Schreiber, D.K.; Toloczko, M.B. [Pacific Northwest National Lab, Richland, WA 99354 (United States); Garner, F.A. [Department of Nuclear Engineering, Texas A& M University, College Station, TX 77840 (United States); Radiation Effects Consulting, Richland, WA 99354 (United States); Shao, Lin [Department of Nuclear Engineering, Texas A& M University, College Station, TX 77840 (United States)

2016-12-15

Ferritic/martensitic alloys are required for advanced reactor components to survive 500–600 neutron-induced dpa. Ion-induced void swelling of ferritic/martensitic alloy T91 in the quenched and tempered condition has been studied using a defocused, non-rastered 3.5 MeV Fe-ion beam at 475 °C to produce damage levels up to 1000 peak displacements per atom (dpa). The high peak damage level of 1000 dpa is required to reach 500–600 dpa level due to injected interstitial suppression of void nucleation in the peak dpa region, requiring data extraction closer to the surface at lower dpa levels. At a relatively low peak damage level of 250 dpa, voids began to develop, appearing first in the near-surface region. With increasing ion fluence, swelling was observed deeper in the specimen, but remained completely suppressed in the back half of the ion range, even at 1000 peak dpa. The local differences in dpa rate in the front half of the ion range induce an “internal temperature shift” that strongly influences the onset of swelling, with shorter transient regimes resulting from lower dpa rates, in agreement not only with observations in neutron irradiation studies but also in various ion irradiations. Swelling was accompanied by radiation-induced precipitation of Cu-rich and Si, Ni, Mn-rich phases were observed by atom probe tomography, indicating concurrent microchemical evolution was in progress. In comparison to other ferritic/martensitic alloys during ion irradiation, T91 exhibits good swelling resistance with a swelling incubation period of about 400 local dpa.

Surface Brillouin scattering measurement of the elastic constants of single crystal InAs{sub 0.91}Sb{sub 0.09}

Energy Technology Data Exchange (ETDEWEB)

Kotane, L M; Comins, J D; Every, A G [Materials Physics Research Institute, School of Physics, University of the Witwatersrand, Johannesburg, Wits 2050 (South Africa); Botha, J R, E-mail: Lesias.Kotane@wits.ac.z [Department of Physics, Nelson Mandela Metropolitan University, Port Elizabeth (South Africa)

2011-01-01

Surface Brillouin scattering of light has been used to measure the angular dependence of the Rayleigh surface acoustic wave (SAW), pseudo surface acoustic wave (PSAW) and longitudinal lateral wave (LLW) speeds in a (100)-oriented single crystal of the ternary semiconductor alloy InAs{sub 0.91}Sb{sub 0.09}. The wave speed measurements have been used to determine the room temperature values of the elastic constants C{sub 11}, C{sub 12} and C{sub 44} of the alloy. A simple and robust fitting procedure has been implemented for recovering the elastic constants, in which the merit function is constructed from explicit secular functions that determine the surface and lateral wave speeds in the [001] and [011] crystallographic directions. In the fitting, relatively larger weighting factors have been assigned to the SAW and PSAW data because of the greater precision with which the surface modes can be measured as compared with the lateral wave.

The effect of PVD coatings on the corrosion behaviour of AZ91 magnesium alloy

International Nuclear Information System (INIS)

Altun, Hikmet; Sen, Sadri

2006-01-01

In this study, multilayered AlN (AlN + AlN + AlN) and AlN + TiN were coated on AZ91 magnesium alloy using physical vapour deposition (PVD) technique of DC magnetron sputtering, and the influence of the coatings on the corrosion behaviour of the AZ91 alloy was examined. A PVD system for coating processes, a potentiostat for electrochemical corrosion tests, X-ray difractometer for compositional analysis of the coatings, and scanning electron microscopy for surface examinations were used. It was determined that PVD coatings deposited on AZ91 magnesium alloy increased the corrosion resistance of the alloy, and AlN + AlN + AlN coating increased the corrosion resistance much more than AlN + TiN coating. However, it was observed that, in the coating layers, small structural defects e.g., pores, pinholes, cracks that could arise from the coating process or substrate and get the ability of protection from corrosion worsened were present

Material properties of Grade 91 steel at elevated temperature and their comparison with a design code

Energy Technology Data Exchange (ETDEWEB)

Lee, Hyeong Yeon; Kim, Woo Gon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Lee, Han Sang; Kim, Yun Jae [Korea Univ., Seoul (Korea, Republic of)

2013-10-15

In this study, the material properties of tensile strength, creep properties, and creep crack growth model for Gr.91 steel at elevated temperature were obtained from material tests at KAERI, and the test data were compared with those of the French elevated temperature design code, RCC-MRx. The conservatism of the material properties in the French design code is highlighted. Mod.9Cr-1Mo (ASME Grade 91; Gr.91) steel is widely adopted as candidate material for Generation IV nuclear systems as well as for advanced thermal plants. In a Gen IV sodium-cooled fast reactor of the PGSFR (Prototype Gen IV Sodium-cooled Fast Reactor) being developed by KAERI (Korea Atomic Energy Research Institute), Gr.91 steel is selected as the material for the steam generator, secondary piping, and decay heat exchangers. However, as this material has a relatively shorter history of usage in an actual plant than austenitic stainless steel, there are still many issues to be addressed including the long-term creep rupture life extrapolation and ratcheting behavior with cyclic softening characteristics.

A biodegradable AZ91 magnesium alloy coated with a thin nanostructured hydroxyapatite for improving the corrosion resistance.

Science.gov (United States)

Mukhametkaliyev, T M; Surmeneva, M A; Vladescu, A; Cotrut, C M; Braic, M; Dinu, M; Vranceanu, M D; Pana, I; Mueller, M; Surmenev, R A

2017-06-01

The main aim of this study was to investigate the properties of an AZ91 alloy coated with nanostructured hydroxyapatite (HA) prepared by radio frequency (RF) magnetron sputtering. The bioactivity and biomineralization of the AZ91 magnesium alloy coated with HA were investigated in simulated body fluid (SBF) via an in vitro test. Scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, and X-ray diffraction (XRD) analyses were performed. The samples were immersed in SBF to study the ability of the surface to promote the formation of an apatite layer as well as corrosion resistance and mass change of the HA-coated AZ91 alloy. Electrochemical tests were performed to estimate the corrosion behaviour of HA-coated and uncoated samples. The results revealed the capability of the HA coating to significantly improve the corrosion resistance of the uncoated AZ91 alloy. Copyright © 2017 Elsevier B.V. All rights reserved.

Effect of Rare Earth on Corrosion Products and Impedance Behavior of AZ91 Magnesium Alloy Under Dry-wet Cycles

Directory of Open Access Journals (Sweden)

ZHAO Xi

2017-04-01

Full Text Available The effect of mischmetal of lanthanum and cerium on the composition and structure of the corrosion products on the surface of AZ91 Mg alloy in deicing salt solution under dry-wet cycles was investigated by scanning electron microscopy (SEM, X-ray diffraction (XRD and energy dispersive spectrometer (EDS. The results show that the corrosion products of AZ91 Mg alloy without mischmetal addition (La,Ce are mainly composed of Mg(OH2, MgO, CaCO3 and Mg6Al2CO3(OH16·4H2O; and (La,CeAlO3 can be found in the products of AZ91 with mischmetal addition, meanwhile dense layer occurs in the corrosion products. Electrochemical impedance spectroscopy (EIS measurements show that the charge transfer resistance of AZ91 alloy with mischmetal addition tested in the same dry-wet cycles is much higher than that of AZ91 alloy, the addition of mischmetal helps to reduce the dispersing effect of impedance spectroscopy, indicating that the corrosion resistance of AZ91 Mg alloy and the stability of corrosion product films can be improved by mischmetal of La and Ce.

modelling of directed evolution: Implications for experimental design and stepwise evolution

OpenAIRE

Wedge , David C.; Rowe , William; Kell , Douglas B.; Knowles , Joshua

2009-01-01

In silico modelling of directed evolution: Implications for experimental design and stepwise evolution correspondence: Corresponding author. Tel.: +441613065145. (Wedge, David C.) (Wedge, David C.) Manchester Interdisciplinary Biocentre, University of Manchester - 131 Princess Street--> , Manchester--> , M1 7ND--> - UNITED KINGDOM (Wedge, David C.) UNITED KINGDOM (Wedge, David C.) Man...

Fecundity of walleyes in western Lake Erie, 1966 and 1990-91

Science.gov (United States)

Muth, Kenneth M.; Ickes, Brian S.

1993-01-01

Ovaries were collected from walleyes (Stizostedion vitreum vitreum) in western Lake Erie just prior to spawning in 1990 and 1991 to determine current fecundity. Results were compared with fecundity determined in 1966 prior to stock rehabilitation when walleye abundance was lower and fish size at age was greater. Fecundity estimates determined from 121 fish aged 3-10 ranged from 53,000 to 426,000 eggs per female. Increases in egg production correlated with increases in length and weight, and weight accounting for most of the variability. In 1990-91 the mean egg production of the dominant age groups of spawners (ages 4 to 8) was approximately 25% lower than fishes of similar age in 1966. The mean egg diameter in 1990-91 (1.63 mm) was not related to the size or age of the fish and was not significantly smaller than the egg diameter in 1966 (1.72 mm).

The pedagogical implications of information and communication ...

African Journals Online (AJOL)

The pedagogical implications of information and communication technology on adult education: a case study of the osun state colleges of ... Finally, the department should give individual students access to the use of 1C1 equipment.

Influence of Sulfate-Reducing Bacteria on the Corrosion Residual Strength of an AZ91D Magnesium Alloy

Science.gov (United States)

Zhu, Xianyong; Liu, Yaohui; Wang, Qiang; Liu, Jiaan

2014-01-01

In this paper, the corrosion residual strength of the AZ91D magnesium alloy in the presence of sulfate-reducing bacteria is studied. In the experiments, the chemical composition of corrosion film was analyzed by a scanning electron microscope with energy dispersive X-ray spectroscopy. In addition, a series of instruments, such as scanning electronic microscope, pH-meter and an AG-10TA materials test machine, were applied to test and record the morphology of the corrosion product, fracture texture and mechanical properties of the AZ91D magnesium alloy. The experiments show that the sulfate-reducing bacteria (SRB) play an important role in the corrosion process of the AZ91D magnesium alloy. Pitting corrosion was enhanced by sulfate-reducing bacteria. Corrosion pits are important defects that could lead to a significant stress concentration in the tensile process. As a result, sulfate-reducing bacteria influence the corrosion residual strength of the AZ91D magnesium alloy by accelerating pitting corrosion. PMID:28788236

Influence of heat treatment on microstructure and properties of GX12CrMoVNbN9-1 cast steel

Directory of Open Access Journals (Sweden)

G. Golański

2010-07-01

Full Text Available The paper presents results of research on the influence of multistage heat treatment on microstructure and properties of high-chromiummartensitic GX12CrMoVNbN9 – 1 (GP91 steel. The material under investigation were samples taken out from a test coupon. Heattreatment of GP91 cast steel was performed at the parameters of temperature and time typical of treatment for multi-ton steel casts. The research has proved that in the as-received condition (as-cast state GP91 cast steel was characterized by a coarse grain, martensitic microstructure which provided the required standard mechanical properties. The heat treatment of GP91 cast steel contributed to obtainment of a fine grain microstructure of high tempered martensite with numerous precipitations of carbides of diverse size. The GP91 cast steel structure received through heat treatment made it possible to obtain high plastic properties, particularly impact strength, maintaining strength properties on the level of the required minimum.

Laser and Plasma Technology Division : annual report (1990-91)

International Nuclear Information System (INIS)

1991-01-01

A brief account of the research and development (R and D) activities carried out by Laser and Plasma Technology Division, Bhabha Atomic Research Centre, Bombay during the period 1990-91 is presented. The R and D activities are reported under the headings: 1) Laser Activities, 2) Thermal Plasma Activities, and 3) Electron Beam Activities. List of publications including journal articles, papers published in symposia, conferences etc. is given at the end. (original). figs

45 CFR 91.13 - Exceptions to the rules against age discrimination: Normal operation or statutory objective of...

Science.gov (United States)

2010-10-01

... objective of any program or activity. A recipient is permitted to take an action, otherwise prohibited by...: Normal operation or statutory objective of any program or activity. 91.13 Section 91.13 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION NONDISCRIMINATION ON THE BASIS OF AGE IN...

Dicty_cDB: AFI409 [Dicty_cDB

Lifescience Database Archive (English)

Full Text Available BC077988 |pid:none) Xenopus laevis achalasia, adrenoco... 103 2e-20 AK088247_1( AK088247 |pid:none) Mus musc...ulus 2 days neonate thymus... 95 5e-18 BC067671_1( BC067671 |pid:none) Danio rerio achalasia, adrenocorti......1 7e-17 AK222509_1( AK222509 |pid:none) Homo sapiens mRNA for achalasia, a... 91 7e-17 (Q9NRG9) RecName: Ful...20826 fis, cl... 91 1e-16 BC120418_1( BC120418 |pid:none) Bos taurus achalasia, adrenocortic... 91 1e-16 BT0

14 CFR 91.1097 - Pilot and flight attendant crewmember training programs.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Pilot and flight attendant crewmember... RULES Fractional Ownership Operations Program Management § 91.1097 Pilot and flight attendant crewmember training programs. (a) Each program manager must establish and maintain an approved pilot training program...

22 CFR 91.3 - Assistance to Customs and Tariff Commission representatives.

Science.gov (United States)

2010-04-01

... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Assistance to Customs and Tariff Commission... CONTROLS § 91.3 Assistance to Customs and Tariff Commission representatives. Consular officers shall render all proper assistance to Customs and Tariff Commission representatives abroad to aid them in the...

The Effects of Rare Earth Pr and Heat Treatment on the Wear Properties of AZ91 Alloy

Directory of Open Access Journals (Sweden)

Ning Li

2018-06-01

Full Text Available This paper investigated the influences of Pr addition and heat treatment (T6 on the dry sliding wear behavior of AZ91 alloy. The wear rates and friction coefficients were measured by using a pin-on-disc tribometer under loads of 30, 60 and 90 N at dry sliding speeds of 100 rpm, over a sliding time of 15 min. The worn surfaces were examined using a scanning electron microscope and was analyzed with an energy dispersive spectrometer. The experimental results revealed that AZ91-1.0%Pr magnesium alloy exhibited lower wear rate and friction coefficient than the other investigated alloys. As the applied load increased, the wear rate and friction coefficient increased. Compared with the as-cast AZ91-1.0%Pr magnesium alloy, the hardness and wear resistance of the alloy after solution treatment were reduced, and through the subsequent aging, the hardness and wear resistance of the alloy were improved and the hardness was 101.1 HB (compared to as-cast AZ91 magnesium alloy, it increased by 45%. The AZ91-1.0%Pr with T6 magnesium alloy exhibited best wear resistance. Abrasion was dominant at load of 30 N, delamination was dominant at load of 60 N and plastic deformation was dominant at load of 90 N. Oxidation was observed at all loads.

Microstructure investigation and first-principle analysis of die-cast AZ91 alloy with calcium addition

International Nuclear Information System (INIS)

Lin, L.; Wang, F.; Yang, L.; Chen, L.J.; Liu, Z.; Wang, Y.M.

2011-01-01

Highlights: → Die-cast AZ91 with Ca addition was investigated experimentally and theoretically. → Precipitation sequence was confirmed with increasing Ca addition. → Phase stability difference was verified by first-principle calculation. → Valence configurations were associated with alloying effects of Al, Mg and Ca. - Abstract: In order to get improved mechanical properties of die-cast AZ91 alloy under elevated temperatures, Ca element was added as a cost-effective alloying constituent. It appeared that minor Ca addition less than 0.5 wt% would result in no apparent change in microstructure, but the tensile strength at elevated temperatures was improved considerably. When increasing Ca addition to more than 1.0 wt%, Al 2 Ca phase will precipitate during solidification, no Mg 2 Ca phase was discovered. Homogeneous microstructure and high temperature stability in tensile strength of die-cast AZ91 alloy with Ca addition was mainly attributed to the precipitation of Al 2 Ca phase, which considerably refined the bulky β-Mg 17 Al 12 phase distributed originally at the grain boundaries of die-cast AZ91 alloy with no Ca addition. The priority of Al 2 Ca phase compared to Mg 2 Ca phase in precipitation sequence was verified by first-principle calculation of their cohesive energy and formation enthalpy, and can also be associated with more bounding electrons between Al and Ca atoms.

The proton pump inhibitor, omeprazole, but not lansoprazole or pantoprazole, is a metabolism-dependent inhibitor of CYP2C19: implications for coadministration with clopidogrel.

Science.gov (United States)

Ogilvie, Brian W; Yerino, Phyllis; Kazmi, Faraz; Buckley, David B; Rostami-Hodjegan, Amin; Paris, Brandy L; Toren, Paul; Parkinson, Andrew

2011-11-01

As a direct-acting inhibitor of CYP2C19 in vitro, lansoprazole is more potent than omeprazole and other proton pump inhibitors (PPIs), but lansoprazole does not cause clinically significant inhibition of CYP2C19 whereas omeprazole does. To investigate this apparent paradox, we evaluated omeprazole, esomeprazole, R-omeprazole, lansoprazole, and pantoprazole for their ability to function as direct-acting and metabolism-dependent inhibitors (MDIs) of CYP2C19 in pooled human liver microsomes (HLM) as well as in cryopreserved hepatocytes and recombinant CYP2C19. In HLM, all PPIs were found to be direct-acting inhibitors of CYP2C19 with IC(50) values varying from 1.2 μM [lansoprazole; maximum plasma concentration (C(max)) = 2.2 μM] to 93 μM (pantoprazole; C(max) = 6.5 μM). In addition, we identified omeprazole, esomeprazole, R-omeprazole, and omeprazole sulfone as MDIs of CYP2C19 (they caused IC(50) shifts after a 30-min preincubation with NADPH-fortified HLM of 4.2-, 10-, 2.5-, and 3.2-fold, respectively), whereas lansoprazole and pantoprazole were not MDIs (IC(50) shifts lansoprazole, or pantoprazole, as irreversible (or quasi-irreversible) MDIs of CYP2C19. These results have important implications for the mechanism of the clinical interaction reported between omeprazole and clopidogrel, as well as other CYP2C19 substrates.

Oral administration of Bifidobacterium bifidum G9-1 alleviates rotavirus gastroenteritis through regulation of intestinal homeostasis by inducing mucosal protective factors.

Science.gov (United States)

Kawahara, Tomohiro; Makizaki, Yutaka; Oikawa, Yosuke; Tanaka, Yoshiki; Maeda, Ayako; Shimakawa, Masaki; Komoto, Satoshi; Moriguchi, Kyoko; Ohno, Hiroshi; Taniguchi, Koki

2017-01-01

Human rotavirus (RV) infection is a leading cause of dehydrating diarrhea in infants and young children worldwide. Since therapeutic approaches to RV gastroenteritis are limited to alleviation of dehydration with oral rehydration solutions, more direct approaches to palliate symptoms of RV gastroenteritis are required. Treatments with probiotics have been increasingly recognized as alternative safe and low cost treatments for moderate infectious diarrhea. In this study, Bifidobacterium bifidum G9-1 (BBG9-1), which has been used as an intestinal drug for several decades, was shown to have a remarkable protective effect against RV gastroenteritis in a suckling mice model. As well as prophylactic oral administration of BBG9-1 from 2 days before RV infection, therapeutic oral administration of BBG9-1 from 1 day after RV infection significantly alleviated RV-induced diarrhea. Therapeutic administration of BBG9-1 reduced various types of damage in the small intestine, such as epithelial vacuolization and villous shortening, and significantly diminished the infectious RV titer in mixtures of cecal contents and feces. It was also shown that therapeutic administration of BBG9-1 significantly increased the number of acidic mucin-positive goblet cells and the gene expression of mucosal protective factors including MUC2, MUC3, MUC4, TGFβ1 and TFF3 in the small intestine. This led to alleviation of low gut permeability shown as decreased gene expression levels of occludin, claudin-1 and villin-1 after RV infection. Furthermore, in the small intestine, therapeutic administration of BBG9-1 significantly palliated the decreased gene expression of SGLT-1, which plays an important role in water absorption. In the large intestine, administered BBG9-1 was shown to replicate to assimilate undigested nutrients, resulting in normalization of the abnormally high osmotic pressure. These results suggested that water malabsorption caused by RV infection was alleviated in mice administered

Oral administration of Bifidobacterium bifidum G9-1 alleviates rotavirus gastroenteritis through regulation of intestinal homeostasis by inducing mucosal protective factors.

Directory of Open Access Journals (Sweden)

Tomohiro Kawahara

Full Text Available Human rotavirus (RV infection is a leading cause of dehydrating diarrhea in infants and young children worldwide. Since therapeutic approaches to RV gastroenteritis are limited to alleviation of dehydration with oral rehydration solutions, more direct approaches to palliate symptoms of RV gastroenteritis are required. Treatments with probiotics have been increasingly recognized as alternative safe and low cost treatments for moderate infectious diarrhea. In this study, Bifidobacterium bifidum G9-1 (BBG9-1, which has been used as an intestinal drug for several decades, was shown to have a remarkable protective effect against RV gastroenteritis in a suckling mice model. As well as prophylactic oral administration of BBG9-1 from 2 days before RV infection, therapeutic oral administration of BBG9-1 from 1 day after RV infection significantly alleviated RV-induced diarrhea. Therapeutic administration of BBG9-1 reduced various types of damage in the small intestine, such as epithelial vacuolization and villous shortening, and significantly diminished the infectious RV titer in mixtures of cecal contents and feces. It was also shown that therapeutic administration of BBG9-1 significantly increased the number of acidic mucin-positive goblet cells and the gene expression of mucosal protective factors including MUC2, MUC3, MUC4, TGFβ1 and TFF3 in the small intestine. This led to alleviation of low gut permeability shown as decreased gene expression levels of occludin, claudin-1 and villin-1 after RV infection. Furthermore, in the small intestine, therapeutic administration of BBG9-1 significantly palliated the decreased gene expression of SGLT-1, which plays an important role in water absorption. In the large intestine, administered BBG9-1 was shown to replicate to assimilate undigested nutrients, resulting in normalization of the abnormally high osmotic pressure. These results suggested that water malabsorption caused by RV infection was alleviated in

Phylogeny of fungal hemoglobins and expression analysis of the Aspergillus oryzae flavohemoglobin gene fhbA during hyphal growth

NARCIS (Netherlands)

Biesebeke, R. te; Levasseur, A.; Boussier, A.; Record, E.; Hondel, C.A.M.J.J. van den; Punt, P.J.

2010-01-01

The fhbA genes encoding putative flavohemoglobins (FHb) from Aspergillus niger and Aspergillus oryzae were isolated. Comparison of the deduced amino acid sequence of the A. niger fhbA gene and other putative filamentous fungal FHb-encoding genes to that of Ralstonia eutropha shows an overall

Corrosion mechanism of T91 steel by Pb-Bi eutectic used as spallation target: importance for accelerator driven system; Mecanisme de corrosion de l'acier T91 par l'eutectique Pb-Bi utilise comme materiau de cible de spallation: importance pour les reacteurs hybrides

Energy Technology Data Exchange (ETDEWEB)

Martinelli, L

2005-10-15

The aim of this work has been to determine the oxidation mechanism of the martensitic steel T91 in the Pb-Bi liquid eutectic alloy, saturated in oxygen, at 470 C, in order to develop a long-term predictive model of the oxidation kinetics of the steel. This work enters in the framework of the lifetime studies of the spallation module demonstrator: MEGAPIE for the researches on hybrid reactors. An experimental characterization of the oxide layers has been carried out as well as the oxidation kinetics of the T91 steel. An oxidation mechanism has been elaborated from these experimental results and then simulated. The oxide layer formed at the T91 surface presents a duplex structure constituted by a magnetite external layer and a spinel Fe-Cr internal layer. A growth mechanism of the oxide layers has been proposed: the growth of the magnetite layer seems to be limited by the iron diffusion in the lattice of the duplex oxide layer. In parallel, an auto-regulation mechanism seems to govern the growth of the Fe-Cr spinel layer. This mechanism includes a non-limiting step of the oxygen diffusion in the oxide layer (by liquid way in the nano-channels of lead), as well as a limiting step of iron diffusion in the lattice of the oxide layer. In considering the proposed oxidation mechanisms, a simulation of the growth of the two oxide layers is carried out and compared to the long-time oxidation growth kinetics. The good agreement between the experimental results allows, finally, to strengthen the proposition of a long-term growth kinetic oxidation mechanism of the oxide layers. (O.M.)

Anisotropy in thermal conductivity of graphite flakes–SiC_p/matrix composites: Implications in heat sinking design for thermal management applications

International Nuclear Information System (INIS)

Molina, J.M.; Louis, E.

2015-01-01

Within the frame of heat dissipation for electronics, a very interesting family of anisotropic composite materials, fabricated by liquid infiltration of a matrix into preforms of oriented graphite flakes and SiC particles, has been recently proposed. Aiming to investigate the implications of the inherent anisotropy of these composites on their thermal conductivity, and hence on their potential applications, materials with matrices of Al–12 wt.% Si alloy and epoxy polymer have been fabricated. Samples have been cut at a variable angle with respect to the flakes plane and thermal conductivity has been measured by means of two standard techniques, namely, steady state technique and laser flash method. Experimental results are presented and discussed in terms of current models, from which important technological implications for heat sinking design can be derived. - Highlights: • Anisotropy in thermal conductivity of graphite flakes-based composites is evaluated. • Samples are cut in a direction forming a variable angle with the oriented flakes. • For angles 0° and 90°, thermal conductivity does not depend on sample geometry. • For intermediate angles, thermal conductivity strongly depends on sample geometry. • “Thin” samples must be thicker than 600 μm, “thick” samples must be encapsulated.

A comparative study on the compatibility of liquid lead–gold eutectic and liquid lead–bismuth eutectic with T91 and SS 316LN steels

International Nuclear Information System (INIS)

Dai, Y.; Gao, W.; Zhang, T.; Platacis, E.; Heinitz, S.; Thomsen, K.

2012-01-01

Liquid lead–gold eutectic (LGE) is considered as a potential target material for high power spallation sources. In the present work, the corrosion effects of LGE on T91 and SS 316LN steels have been investigated in comparison with that of liquid lead–bismuth eutectic (LBE) under the same testing conditions. Two tests were conducted at 400 °C for 1800 h and at 450 °C for 1300 h, in which specimens of the two steels were exposed to 1 m/s flowing LGE and LBE. Surface inspections showed that the specimens underwent a mixed corrosion mode of dissolution and oxidation. The results obtained from the SS 316LN specimens are very interesting. Firstly, EDX (electron energy dispersion X-ray spectrometry) analyses revealed that Ni, Cr and Mn have a higher dissolution rate in LGE than in LBE. Secondly, it was observed that LBE attacked strongly on grain-boundaries (GBs) and twin-boundaries (TBs), while LGE did not preferentially attack GBs and TBs. Further, the diffusion or penetration paths of LBE look straight, while those of LGE look like a complex network. In the attacked regions the chemical composition of the steel did not change much in the LBE case, but changed greatly in the LGE case. The T91 specimens exhibited considerably weaker corrosion effects under the present testing conditions.

Correlative change of corrosion behavior with the microstructure of AZ91 Mg alloy modified with Y additions

International Nuclear Information System (INIS)

Jia, Ruiling; Zhang, Ming; Zhang, Lina; Zhang, Wei; Guo, Feng

2015-01-01

Highlights: • The effect of Y addition into the AZ91 Mg alloys was investigated. • Initial stage of corrosion was studied by in-situ 3D digital microscopy observation. • The potential difference was investigated by Kelvin probe force microscopy. • The effect of Y addition on the corrosion mechanisms of AZ91 alloy was studied. - Abstract: Microstructure characterization of the AZ91 magnesium alloys with or without rare earth element yttrium (Y) has been revealed by SEM, EDS and EPMA. Some Y-rich phases can be found in the magnesium alloys with Y additions. The fraction of β-Mg 17 Al 12 phase obvious decreases and turns into granular distribution with the increase of Y addition instead of original wet distribution along grain boundaries. The results of the potentiodynamic polarization tests show that the corrosion resistance of AZ91 alloy is improved with appropriate Y additions. But an in-situ observation of 3D digital microscopy for the initial stage of corrosion of the magnesium alloy with 0.9%Y addition shows that Y-rich phases act as cathodic effect and the α phases in the vicinity of them acting as anode are corroded. So the additions of Y have a beneficial effect that can depress the overall corrosion of AZ91 alloy, whereas its harmful effect is related to Y-rich phases because they present the highest Volta potential difference from the adjacent matrix and they can drive galvanic corrosion

Correlative change of corrosion behavior with the microstructure of AZ91 Mg alloy modified with Y additions

Energy Technology Data Exchange (ETDEWEB)

Jia, Ruiling, E-mail: jrl014014@163.com [College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia 010051 (China); Zhang, Ming; Zhang, Lina [College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia 010051 (China); Zhang, Wei [Laboratory for Corrosion and Protection, Institute of Metal Research, Chinese Academy of Sciences, 62 Wencui Road, Shenyang 110016 (China); Guo, Feng [College of Materials Science and Engineering, Inner Mongolia University of Technology, Hohhot, Inner Mongolia 010051 (China)

2015-06-15

Highlights: • The effect of Y addition into the AZ91 Mg alloys was investigated. • Initial stage of corrosion was studied by in-situ 3D digital microscopy observation. • The potential difference was investigated by Kelvin probe force microscopy. • The effect of Y addition on the corrosion mechanisms of AZ91 alloy was studied. - Abstract: Microstructure characterization of the AZ91 magnesium alloys with or without rare earth element yttrium (Y) has been revealed by SEM, EDS and EPMA. Some Y-rich phases can be found in the magnesium alloys with Y additions. The fraction of β-Mg{sub 17}Al{sub 12} phase obvious decreases and turns into granular distribution with the increase of Y addition instead of original wet distribution along grain boundaries. The results of the potentiodynamic polarization tests show that the corrosion resistance of AZ91 alloy is improved with appropriate Y additions. But an in-situ observation of 3D digital microscopy for the initial stage of corrosion of the magnesium alloy with 0.9%Y addition shows that Y-rich phases act as cathodic effect and the α phases in the vicinity of them acting as anode are corroded. So the additions of Y have a beneficial effect that can depress the overall corrosion of AZ91 alloy, whereas its harmful effect is related to Y-rich phases because they present the highest Volta potential difference from the adjacent matrix and they can drive galvanic corrosion.

Studies of 99mTc-BnAO (HL-91): a non-nitroaromatic compound for hypoxic cell detection