WorldWideScience

Sample records for europium carbides

  1. Fluorescent Europium Chelate Stain

    Science.gov (United States)

    Scaff, W. L.; Dyer, D. L.; Mori, K.

    1969-01-01

    The europium chelate of 4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione (thenoyl-trifluoroacetone; TTA) is firmly bound to microorganisms. It fluoresces brightly at 613 nm with activation at 340 nm. Cells may be stained with 10−3m chelate in 50% ethyl alcohol, followed by washing with 50% ethyl alcohol. Equal or better stains are produced with 10−3m aqueous europium salt, water wash, and 10−2m aqueous TTA. A noncomplexing buffer should be used to maintain the pH at 6.5 to 6.8. Images PMID:4181107

  2. Europium-155 in Debris from Nuclear Weapons

    DEFF Research Database (Denmark)

    Aarkrog, Asker; Lippert, Jørgen Emil

    1967-01-01

    The lithium-drifted germanium detector enables determination of europium-155 on a routine basis in environmental samples contaminated with debris from nuclear weapons. From measurements of europium-155, cesium-144, and strontium-90 in air filters collected between 1961 and 1966, the yield...... of europium-155 from weapons was estimated at 1400 atoms per 10$^{6}$ fissions, which is close to the yield of europium-155 from fast fission of uranium-238....

  3. The electrochemical synthesis of europium boride

    Directory of Open Access Journals (Sweden)

    Bukatova G.A.

    2003-01-01

    Full Text Available The electroreduction of boron, europium and the electrochemical synthesis of europium boride have been investigated in NaCl-KCl-NaF(10 wt. % melt on silver and molybdenum electrodes. The parameters of boron reduction in the chloride-fluoride melt have been obtained and the character of its joint deposition with europium has been studied.

  4. The electrochemical synthesis of europium boride

    OpenAIRE

    Bukatova G.A.; Kuznetsov S.A.; Gaune-Escard M.

    2003-01-01

    The electroreduction of boron, europium and the electrochemical synthesis of europium boride have been investigated in NaCl-KCl-NaF(10 wt. %) melt on silver and molybdenum electrodes. The parameters of boron reduction in the chloride-fluoride melt have been obtained and the character of its joint deposition with europium has been studied.

  5. Liposome Biodistribution via Europium Complexes.

    Science.gov (United States)

    Mignet, Nathalie; Scherman, Daniel

    2017-01-01

    The drug delivery field needs tools to follow vector biodistribution. Radioactive tracers and conventional fluorophores are widely used. We propose here to use europium complexes. Use of pulsed light source time-resolved fluorimetry takes into account the fluorescence decay time of the lanthanide chelates to gain sensitivity in biological media. The method was developed to follow liposome biodistribution. Octadecyl-DTPA.Eu compound has been prepared and incorporated into liposomes without alteration of its fluorescence signal. The method has been validated by comparison with fluorophore-labeled liposomes. The way to proceed to use this method for liposomes or other vectors is detailed.

  6. Resonance ionization scheme development for europium

    CERN Document Server

    Chrysalidis, K; Fedosseev, V N; Marsh, B A; Naubereit, P; Rothe, S; Seiffert, C; Kron, T; Wendt, K

    2017-01-01

    Odd-parity autoionizing states of europium have been investigated by resonance ionization spectroscopy via two-step, two-resonance excitations. The aim of this work was to establish ionization schemes specifically suited for europium ion beam production using the ISOLDE Resonance Ionization Laser Ion Source (RILIS). 13 new RILIS-compatible ionization schemes are proposed. The scheme development was the first application of the Photo Ionization Spectroscopy Apparatus (PISA) which has recently been integrated into the RILIS setup.

  7. Resonance ionization scheme development for europium

    Energy Technology Data Exchange (ETDEWEB)

    Chrysalidis, K., E-mail: katerina.chrysalidis@cern.ch; Goodacre, T. Day; Fedosseev, V. N.; Marsh, B. A. [CERN (Switzerland); Naubereit, P. [Johannes Gutenberg-Universität, Institiut für Physik (Germany); Rothe, S.; Seiffert, C. [CERN (Switzerland); Kron, T.; Wendt, K. [Johannes Gutenberg-Universität, Institiut für Physik (Germany)

    2017-11-15

    Odd-parity autoionizing states of europium have been investigated by resonance ionization spectroscopy via two-step, two-resonance excitations. The aim of this work was to establish ionization schemes specifically suited for europium ion beam production using the ISOLDE Resonance Ionization Laser Ion Source (RILIS). 13 new RILIS-compatible ionization schemes are proposed. The scheme development was the first application of the Photo Ionization Spectroscopy Apparatus (PISA) which has recently been integrated into the RILIS setup.

  8. Electronic state of europium atoms on surface of oxidized tungsten

    CERN Document Server

    Davydov, S Y

    2001-01-01

    The energy scheme of the europium atoms adsorption system on the tungsten surface, coated with the oxygen monolayer, is considered. The evaluations of the europium adatoms charged state on the oxidized tungsten surface are performed. It is established, that europium, adsorbed at the oxidized tungsten surface, is a positive ion with the charge close to the unit. The zonal scheme of the Eu-O/W adsorption system for the europium low and high concentrations is proposed

  9. Europium anomaly in plagioclase feldspar - Experimental results and semiquantitative model.

    Science.gov (United States)

    Weill, D. F.; Drake, M. J.

    1973-01-01

    The partition of europium between plagioclase feldspar and magmatic liquid is considered in terms of the distribution coefficients for divalent and trivalent europium. A model equation is derived giving the europium anomaly in plagioclase as a function of temperature and oxygen fugacity. The model explains europium anomalies in plagioclase synthesized under controlled laboratory conditions as well as the variations of the anomaly observed in natural terrestrial and extraterrestrial igneous rocks.

  10. Fermi Surface and Antiferromagnetism in Europium Metal

    DEFF Research Database (Denmark)

    Andersen, O. Krogh; Loucks, T. L.

    1968-01-01

    We have calculated the Fermi surface of europium in order to find those features which determine the wave vector of the helical moment arrangement below the Néel point. We find that there are two pieces of Fermi surface: an electron surface at the symmetry point H, which has the shape of rounded...... of the nearly cubical part of the hole surface at P, and we also discuss the effects of the electron surface at H. Since it is likely that barium and europium have similar Fermi surfaces, we have presented several extremal areas and the corresponding de Haas-van Alphen frequencies in the hope that experimental...

  11. Organophosphate Nerve Agent Detection with Europium Complexes

    Directory of Open Access Journals (Sweden)

    Jake R. Schwierking

    2004-01-01

    Full Text Available We explore the detection of paraoxon, a model compound for nonvolatile organophosphate nerve agents such as VX. The detection utilizes europium complexes with 1,10 phenanthroline and thenoyltrifluoroacetone as sensitizing ligands. Both europium luminescence quenching and luminescence enhancement modalities are involved in the detection, which is simple, rapid, and sensitive. It is adaptable as well to the more volatile fluorophosphate nerve agents. It involves nothing more than visual luminescence observation under sample illumination by an ordinary hand-held ultraviolet lamp.

  12. Europium enabled luminescent nanoparticles for biomedical applications

    Energy Technology Data Exchange (ETDEWEB)

    Syamchand, S.S., E-mail: syamchand.ss@gmail.com; Sony, G., E-mail: emailtosony@gmail.com

    2015-09-15

    Lanthanide based nanoparticles are receiving great attention ought to their excellent luminescent and magnetic properties and find challenging biomedical applications. Among the luminescent lanthanide NPs, europium based NPs (Eu-NPs) are better candidates for immunoassay and imaging applications. The Eu-NPs have an edge over quantum dots (QDs) by means of their stable luminescence, long fluorescence lifetime, sharp emission peaks with narrow band width, lack of blinking and biocompatibility. This review surveys the synthesis and properties of a variety of Eu-NPs consolidated from different research articles, for their applications in medicine and biology. The exquisite luminescent properties of Eu-NPs are explored for developing biomedical applications such as immunoassay and bioimaging including multimodal imaging. The biomedical applications of Eu-NPs are mostly diagnostic in nature and mainly focus on various key analytes present in biological systems. The luminescent properties of europium enabled NPs are influenced by a number of factors such as the site symmetry, the metal nanoparticles, metal ions, quantum dots, surfactants, morphology of Eu-NPs, crystal defect, phenomena like antenna effect and physical parameters like temperature. Through this review we explore and assimilate all the factors which affect the luminescence in Eu-NPs and coil a new thread of parameters that control the luminescence in Eu-NPs, which would provide further insight in developing Eu-based nanoprobes for future biomedical prospects. - Highlights: • The review describes 14 major factors that influence the luminescence properties of europium enabled luminescent nanoparticles (Eu-NPs). • Surveys different types of europium containing nanoparticles that have been reported for their biomedical applications. • Eu-NPs are conveniently divided into four different categories, based on the type of the substrates involved. The four categories are (1) virgin Eu-substrate based NPs; (2

  13. The Europium Oxybarometer: Power and Pitfalls

    Science.gov (United States)

    McKay, G.

    2004-01-01

    One of the most important characteristics of a planet is the oxidation state of its mantle, as reflected in primitive basalts. Petrologists have devised several methods to estimate the oxygen fugacity under which basalts crystallized. One method that has been the subject of recent interest involves the depth of the Eu anomaly in first-crystallizing minerals. A discussion detailing the experimental calibration of the Europium oxybarometer and the application of this device to Angrites and Martian basaltic meteorites are presented. The strengths and weaknesses of the instrument are also included.

  14. Europium Effect on the Electron Transport in Graphene Ribbons

    Energy Technology Data Exchange (ETDEWEB)

    Bobadilla, Alfredo D.; Ocola, Leonidas E.; Sumant, Anirudha V.; Kaminski, Michael; Kumar, Narendra; Seminario, Jorge M.

    2015-10-01

    We report in this complementary theoretical-experimental work the effect of gating on the election transport of grapheme ribbons when exposed to very low concentration of europium in an aqueous solution. We find a direct correlation between the level of concentration of europium ions in the solvent and the change in electron transport in graphene, observing a change of up to 3 orders of magnitude at the lowest level of concentration tested (0.1 mM), suggesting a possibility that graphene ribbons can be used for detecting very low concentrations of europium in liquid solutions.

  15. Paramagnetic Europium Salen Complex and Sickle-Cell Anemia

    Science.gov (United States)

    Wynter, Clive I.; Ryan, D. H.; May, Leopold; Oliver, F. W.; Brown, Eugene; Hoffman, Eugene J.; Bernstein, David

    2005-04-01

    A new europium salen complex, Eu(salen)2NH4, was synthesized, and its composition was confirmed by chemical analysis and infrared spectroscopy. Further characterization was carried out by 151 Eu Mössbauer spectroscopy and magnetic susceptibility measurements. Mössbauer spectroscopic measurements were made at varying temperatures between 9 K and room temperature and a value of Debye temperature of 133 ±5 K was computed. Both Mössbauer and magnetic susceptibility measurements confirmed the paramagnetic behavior of this complex and the trivalent state of the europium ion. In view of the fact that the "odd" paramagnetic molecule NO has been shown to reverse sickling of red blood cells in sickle cell anemia, the interaction between the paramagnetic europium salen complex and sickle cells was examined after incubation with this europium complex and shown to have similar effects.

  16. Europium polyoxometalates encapsulated in silica nanoparticles - characterization and photoluminescence studies

    Energy Technology Data Exchange (ETDEWEB)

    Neves, Cristina S.; Granadeiro, Carlos M.; Cunha-Silva, Luis; Eaton, Peter; Balula, Salete S.; Pereira, Eulalia [REQUIMTE/Departamento de Quimica e Bioquimica, Faculdade de Ciencias, Universidade do Porto (Portugal); Ananias, Duarte [CICECO, Departamento de Quimica, Universidade de Aveiro (Portugal); Gago, Sandra [REQUIMTE, Departamento de Quimica, Faculdade de Ciencias e Tecnologia, Universidade Nova de Lisboa, Monte de Caparica (Portugal); Feio, Gabriel [CENIMAT/I3N, Departamento de Ciencia dos Materiais, Faculdade de Ciencias e Tecnologia, Universidade Nova de Lisboa, Monte de Caparica (Portugal); Carvalho, Patricia A. [ICEMS/Departamento de Bioengenharia, Instituto Superior Tecnico, Lisboa (Portugal)

    2013-06-15

    The incorporation of europium polyoxometalates into silica nanoparticles can lead to a biocompatible nanomaterial with luminescent properties suitable for applications in biosensors, biological probes, and imaging. Keggin-type europium polyoxometalates Eu(PW{sub 11}){sub x} (x = 1 and 2) with different europium coordination environments were prepared by using simple methodologies and no expensive reactants. These luminescent compounds were then encapsulated into silica nanoparticles for the first time through the water-in-oil microemulsion methodology with a nonionic surfactant. The europium polyoxometalates and the nanoparticles were characterized by using several techniques [FTIR, FT-Raman, {sup 31}P magic angle spinning (MAS) NMR, and TEM/energy-dispersive X-ray spectroscopy (TEM-EDS), AFM, dynamic light scattering (DLS), and inductively coupled plasma MS (ICP-MS) analysis]. The stability of the material and the integrity of the europium compounds incorporated were also examined. Furthermore, the photoluminescence properties of the Eu(PW{sub 11}){sub x} rate at SiO{sub 2} nanomaterials were evaluated and compared with those of the free europium polyoxometalates. The silica surface of the most stable nanoparticles was successfully functionalized with appropriate organosilanes to enable the covalent binding of oligonucleotides. (Copyright copyright 2013 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  17. Spectral Properties of a bis-Azospiropyran Complexed with Europium

    Science.gov (United States)

    Nourmohammadian, F.; Ghahari, M.; Gholami, M. Davoudzadeh

    2015-09-01

    The complexation of recently synthesized symmetrical bifunctional bis-azospiropyran photochromic dye with europium nitrate and its effect on UV-vis absorption and fluorescent emission was studied. Upon addition of Eu 3+ to colorless spiropyran, a yellow merocyanine europium complex was obtained with an absorption band at 410 nm. Negatively charged phenolic oxygenin zwitterionic ring-open form provides an effective metal binding site for Eu 3+ . Meanwhile, the inherent fluorescence emission of the photochromic dye at 380 nm is switched off due to the Eu 3+ - induced drive of spiro-mero equilibrium to form mero form. The stoichiometry of dye-europium complexation was evaluated by fluorescence emission and UV-vis absorption spectroscopy and a 8:1 ratio was obtained in both cases. The binding constant (K) value of the dye-europium complex was 3 × 106 M -1 . In conclusion, the current molecular switch is a useful sensitive dual measuring tool for solutions containing europium or europium-like elements by evaluation of visible absorption or fluorescent emission spectroscopy.

  18. Metal plasmon enhanced europium complex luminescence

    Energy Technology Data Exchange (ETDEWEB)

    Liu Feng [Department of Chemistry, Queen' s University, 90 Bader Lane, Kingston, Ontario, K7L 3N6 (Canada); Aldea, Gabriela [Department of Chemistry, Queen' s University, 90 Bader Lane, Kingston, Ontario, K7L 3N6 (Canada); Petru Poni Institute of Macromolecular Chemistry Iasi, Aleea Grigore Ghica Voda 41A, 700487 Iasi (Romania); Nunzi, Jean-Michel, E-mail: nunzijm@queensu.c [Department of Chemistry, Queen' s University, 90 Bader Lane, Kingston, Ontario, K7L 3N6 (Canada)

    2010-01-15

    The plasmon enhanced luminescence of a rare-earth complex Tris(6, 6, 7, 7, 8, 8, 8-heptafluoro-2, 2-dimethyl-3, 5-octanedionato) europium (Eu(fod){sub 3}) was investigated. A polyvinyl alcohol (PVA) thin film was successfully adopted as a spacer to separate the Eu complex from the silver island film (SIF), and five-fold enhancement of the radiative decay rate of the Eu complex on SIF was demonstrated based on the luminescence intensity and lifetime measurement. Investigation of the distance dependent luminescence indicates that 7 nm is an optimal distance for SIF enhanced Eu luminescence. Plasmon enhanced rare-earth luminescence based on an organic film spacer would find potential applications in plasmon enhanced organic light emitting diode (OLED) devices.

  19. Novel fluorescent probe for low density lipoprotein, based on the enhancement of Europium emission band

    OpenAIRE

    Courrol, Lilia Coronato; Monteiro, A.M.; SILVA, F.R.O.; L. Gomes; VIEIRA, N.D.; Gidlund, Magnus; Figueiredo Neto, A.M.

    2007-01-01

    We report here the observation of the enhancement of Europium-tetracycline complex emission in Low Density Lipoprotein (LDL) solutions. Europium emission band of tetracycline solution containing Europium (III) chloride hexahydrate was tested to obtain effective enhancement in the presence of native LDL and oxidized LDL. Europium emission lifetime in the presence of lipoproteins was measured, resulting in a simple method to measure the lipoproteins quantity in an aqueous solution at physiologi...

  20. Microstructural Study of Titanium Carbide Coating on Cemented Carbide

    DEFF Research Database (Denmark)

    Vuorinen, S.; Horsewell, Andy

    1982-01-01

    Titanium carbide coating layers on cemented carbide substrates have been investigated by transmission electron microscopy. Microstructural variations within the typically 5µm thick chemical vapour deposited TiC coatings were found to vary with deposit thickness such that a layer structure could...

  1. Europium ion as a probe for binding sites to carrageenans

    Energy Technology Data Exchange (ETDEWEB)

    Ramos, Ana P.; Goncalves, Rogeria R.; Serra, Osvaldo A. [Departamento de Quimica, Faculdade de Filosofia, Ciencias e Letras de Ribeirao Preto, Universidade de Sao Paulo, Ribeirao Preto, Sao Paulo 14040-901 (Brazil); Zaniquelli, Maria Elisabete D. [Departamento de Quimica, Faculdade de Filosofia, Ciencias e Letras de Ribeirao Preto, Universidade de Sao Paulo, Ribeirao Preto, Sao Paulo 14040-901 (Brazil)], E-mail: medzaniquelli@ffclrp.usp.br; Wong, Kenneth [Laboratorio de Fisico-Quimica, Centro de Pesquisas de Paulinia, Rhodia Brasil, Paulinia, Sao Paulo (Brazil)

    2007-12-15

    Carrageenans, sulfated polysaccharides extracted from red algae, present a coil-helix transition and helix aggregation dependence on the type and concentration of counterions. In this study, we focus attention on a mixed valence counterion system: Eu{sup 3+}/Na{sup +} or K{sup +} with different gel-forming carrageenans: kappa, iota, and kappa-2. Results of stationary and time-dependent luminescence showed to be a suitable tool to probe ion binding to both the negatively charged sulfate group and the hydroxyl groups present in the biopolymer. For lower europium ion concentrations, a single longer decay emission lifetime was detected, which was attributed to the binding of europium ion to the carrageenan sulfate groups. An additional decay ascribed to europium binding to hydroxyl groups was observed above a threshold concentration, and this decay was dependent on the carrageenan charge density. Symmetry of the europium ion microenvironment was estimated by the ratio between the intensities of its emission bands, which has been shown to depend on the concentration of europium ions and on the specificity of the monovalent counterion bound to the carrageenan.

  2. ENTIRELY AQUEOUS SOLUTION-GEL ROUTE FOR THE PREPARATION OF ZIRCONIUM CARBIDE, HAFNIUM CARBIDE AND THEIR TERNARY CARBIDE POWDERS

    Directory of Open Access Journals (Sweden)

    Zhang Changrui

    2016-07-01

    Full Text Available An entirely aqueous solution-gel route has been developed for the synthesis of zirconium carbide, hafnium carbide and their ternary carbide powders. Zirconium oxychloride (ZrOCl₂.8H₂O, malic acid (MA and ethylene glycol (EG were dissolved in water to form the aqueous zirconium carbide precursor. Afterwards, this aqueous precursor was gelled and transformed into zirconium carbide at a relatively low temperature (1200 °C for achieving an intimate mixing of the intermediate products. Hafnium and the ternary carbide powders were also synthesized via the same aqueous route. All the zirconium, hafnium and ternary carbide powders exhibited a particle size of ∼100 nm.

  3. First-Principles Investigations on Europium Monoxide

    KAUST Repository

    Wang, Hao

    2011-05-01

    Europium monoxide is both an insulator and a Heisenberg ferromagnet (Tc=69 K). In the present thesis, the author has investigated the electronic structure of different types of EuO by density functional theory. The on-site Coulomb interaction of the localized Eu 4f and 5d electrons, which is wrongly treated in the standard generalized gradient approximation method, is found to be crucial to obtain the correct insulating ground state as observed in experiments. Our results show that the ferromagnetism is stable under pressure, both hydrostatic and uniaxial. For both types of pressure an insulator-metal transition is demonstrated. Moreover, the experimentally observed insulator-metal transition in oxygen deficient and gadolinium-doped EuO is reproduced in our calculations for impurity concentrations of 6.25% and 25%. Furthermore, a 10- layer EuO thin film is theoretically predicted to be an insulator with a narrow band gap of around 0.08 eV, while the Si/EuO interface shows metallic properties with the Si and O 2p as well as Eu 5d bands crossing the Fermi level.

  4. Chloride, bromide and iodide scintillators with europium

    Science.gov (United States)

    Zhuravleva, Mariya; Yang, Kan

    2016-09-27

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  5. Electrochemical extraction of europium from molten fluoride media

    Energy Technology Data Exchange (ETDEWEB)

    Gibilaro, M. [Universite de Toulouse, INPT, UPS, Laboratoire de Genie Chimique, Departement Procedes Electrochimiques, F-31062 Toulouse cedex 09 (France); CNRS, Laboratoire de Genie Chimique, F-31062 Toulouse cedex 09 (France); Massot, L., E-mail: massot@chimie.ups-tlse.f [Universite de Toulouse, INPT, UPS, Laboratoire de Genie Chimique, Departement Procedes Electrochimiques, F-31062 Toulouse cedex 09 (France); CNRS, Laboratoire de Genie Chimique, F-31062 Toulouse cedex 09 (France); Chamelot, P.; Cassayre, L.; Taxil, P. [Universite de Toulouse, INPT, UPS, Laboratoire de Genie Chimique, Departement Procedes Electrochimiques, F-31062 Toulouse cedex 09 (France); CNRS, Laboratoire de Genie Chimique, F-31062 Toulouse cedex 09 (France)

    2009-12-15

    This work concerns the extraction of europium from molten fluoride media. Two electrochemical ways have been examined: (i) the use of a reactive cathode made of copper and (ii) the co-deposition with aluminium on inert electrode, leading to the formation of europium-copper and europium-aluminium alloys, respectively, as identified by SEM-EDS analysis. Cyclic voltammetry and square wave voltammetry were used to identify the reduction pathway and to characterise the step of Cu-Eu and Al-Eu alloys formation. Then, electrochemical extractions using the two methodologies have been performed with extraction efficiency around 92% for copper electrode and 99.7% for co-reduction with aluminium ions.

  6. Solubilization of europium fulvate in aqueous solutions containing complexing agents

    Energy Technology Data Exchange (ETDEWEB)

    Legin, E.K.; Trifonov, Yu.I.; Khokhlov, M.L. [Khlopin Radium Inst., St. Petersburg (Russian Federation)] [and others

    1995-07-01

    The europium fulvate complex is synthesized and characterized by spectroscopic and chemical methods. By an example of this complex, it is demonstrated that metal complexes of humic substances are solubilized in the presence of complexing anions such as OAc{sup {minus}}, C{sub 2}O{sup 2{minus}}{sub 4}, and EDTA{sup 2{minus}}. The solubilization is studied by the optical and radioactive tracer methods. The solubilization of europium fulvate increases parallel to the complexing power of anions. In the solid fulvate europium is bonded stronger than in the ethylenediaminetetraacetate complex. The solubilization is considered as a potential source for decomposition of the {open_quotes}absorbing soil complex,{close_quotes} resulting in mobile forms of a metal and humic component in soils and soil waters.

  7. Excess europium content in Precambrian sedimentary rocks and continental evolution

    Science.gov (United States)

    Jakes, P.; Taylor, S. R.

    1974-01-01

    It is proposed that the europium excess in Precambrian sedimentary rocks, relative to those of younger age, is derived from volcanic rocks of ancient island arcs, which were the source materials for the sediments. Precambrian sedimentary rocks and present-day volcanic rocks of island arcs have similar REE patterns, total REE abundances, and excess Eu, relative to the North American shale composite. The present upper crustal REE pattern, as exemplified by that of sediments, is depleted in Eu, relative to chondrites. This depletion is considered to be a consequence of development of a granodioritic upper crust by partial melting in the lower crust, which selectively retains europium.

  8. Silicon Carbide Electronic Devices

    Science.gov (United States)

    Neudeck, P. G.

    2001-01-01

    The status of emerging silicon carbide (SiC) widebandgap semiconductor electronics technology is briefly surveyed. SiC-based electronic devices and circuits are being developed for use in high-temperature, high-power, and/or high-radiation conditions under which conventional semiconductors cannot function. Projected performance benefits of SiC electronics are briefly illustrated for several applications. However, most of these operational benefits of SiC have yet to be realized in actual systems, primarily owing to the fact that the growth techniques of SiC crystals are relatively immature and device fabrication technologies are not yet sufficiently developed to the degree required for widespread, reliable commercial use. Key crystal growth and device fabrication issues that limit the performance and capability of high-temperature and/or high-power SiC electronics are identified. The electrical and material quality differences between emerging SiC and mature silicon electronics technology are highlighted.

  9. Graphene Nanoplatelet Reinforced Tantalum Carbide

    Science.gov (United States)

    2015-08-27

    et. al. Ultrahigh-pressure consolidation and deformation of tantalum carbide at ambient and high temperatures. Acta Materialia 61-11 (2013) 4001-4009...matrix to reinfor- cement . Al–5BNNT exhibits high deformability as it undergoes 75% thickness reduction in a single pass of cold rolling without...4009Ultrahigh-pressure consolidation and deformation of tantalum carbide at ambient and high temperatures Debrupa Lahiri a, Virendra Singh b, Giovani

  10. Murine High Specificity/Sensitivity Competitive Europium Insulin Autoantibody Assay

    Science.gov (United States)

    Babaya, Naru; Liu, Edwin; Miao, DongMei; Li, Marcella; Yu, Liping

    2009-01-01

    Abstract Background Most insulin autoantibody assays for both human and animal models are in a radioassay format utilizing 125I-insulin, but despite the radioassay format international workshops have documented difficulty in standardization between laboratories. There is thus a need for simpler assay formats that do not utilize radioactivity, yet retain the high specificity and sensitivity of radioassays. Methods To establish an easier enzyme-linked immunosorbent assay (ELISA) for insulin autoantibodies of non-obese diabetic (NOD) mice, we used an ELISA format, competition with unlabeled insulin, europium-avidin, and time-resolved fluorescence detection (competitive europium insulin autoantibody assay). Results The competitive europium assay of insulin autoantibodies when applied to sera from NOD mice had high sensitivity and specificity (92% sensitivity, 100% specificity) compared to our standard insulin autoantibody radioassay (72% sensitivity, 100% specificity) in analyzing blind workshop sera. It is noteworthy that though the assay has extremely high sensitivity for murine insulin autoantibodies and utilizes human insulin as target autoantigen, human sera with high levels of insulin autoantibodies are not detected. Conclusions Our results clearly indicate that low levels of insulin autoantibodies can be detected in an ELISA-like format. Combining a europium-based ELISA with competition with fluid-phase autoantigen can be applicable to many autoantigens to achieve high specificity and sensitivity in an ELISA format. PMID:19344197

  11. Tridentate benzimidazole-pyridine-tetrazolates as sensitizers of europium luminescence.

    Science.gov (United States)

    Shavaleev, Nail M; Eliseeva, Svetlana V; Scopelliti, Rosario; Bünzli, Jean-Claude G

    2014-05-19

    We report on new anionic tridentate benzimidazole-pyridine-tetrazolate ligands that form neutral 3:1 complexes with trivalent lanthanides. The ligands are UV-absorbing chromophores that sensitize the red luminescence of europium with energy-transfer efficiency of 74-100%. The lifetime and quantum yield of the sensitized europium luminescence increase from 0.5 ms and 12-13% for the as-prepared solids to 2.8 ms and 41% for dichloromethane solution. From analysis of the data, the as-prepared solids can be described as aqua-complexes [Ln(κ(3)-ligand)2(κ(1)-ligand)(H2O)x] where the coordinated water molecules are responsible for the strong quenching of the europium luminescence. In solution, the coordinated water molecules are replaced by the nitrogen atoms of the κ(1)-ligand to give anhydrous complexes [Ln(κ(3)-ligand)3] that exhibit efficient europium luminescence. X-ray structures of the anhydrous complexes confirm that the lanthanide ion (La(III), Eu(III)) is nine-coordinate in a distorted tricapped trigonal prismatic environment and that coordination of the lanthanide ion by tetrazolate is weaker than by carboxylate.

  12. Europium 2-benzofuranoate: Synthesis and use for bioimaging

    Science.gov (United States)

    Utochnikova, V. V.; Koshelev, D. S.; Medvedko, A. V.; Kalyakina, A. S.; Bushmarinov, I. S.; Grishko, A. Yu; Schepers, U.; Bräse, S.; Vatsadze, S. Z.

    2017-12-01

    Europium 2-benzofuranoate Eu(BFC)3(H2O)3 was successfully used for bioimaging in cellulo due to the combination of high solubility and high luminescence intensity in solution. It was possible due to the purposeful variation of the aromatic core of carboxylate anion.

  13. Silicon Carbide Growth

    Science.gov (United States)

    2005-01-01

    Andrew Trunek has focused on supporting the Sic team through the growth of Sic crystals, making observations and conducting research that meets the collective needs and requirements of the team while fulfilling program commitments. Cancellation of the Ultra Efficient Engine Technology (UEET) program has had a significant negative impact on resources and research goals. This report highlights advancements and achievements made with this cooperative agreement over the past year. NASA Glenn Research Center (GRC) continues to make advances in silicon carbide (SiC) research during the past year. Step free surfaces were used as substrates for the deposition of GaN epilayers that yielded very low dislocation densities. Defect free 3C- SiC was successfully nucleated on step free mesas and test diodes were fabricated. Web growth techniques were used to increase the usable surface area of dislocation free SiC by approximately equal to 40%. The greatest advancement has been attained on stepped surfaces of SiC. A metrology standard was developed using high temperature etching techniques titled "Nanometer Step Height Standard". This development culminated in being recognized for a 2004 R&D100 award and the process to produce the steps received a NASA Space Act award.

  14. SEPARATION OF EUROPIUM FROM OTHER LANTHANIDE RAE EARTHS BY SOLVENT EXTRACTION

    Science.gov (United States)

    Peppard, D.F.; Horwitz, E.P.; Mason, G.W.

    1963-02-12

    This patent deals with a process of separating europium from other lanthanides present in aqueous hydrochloric or sulfuric acid solutions. The europium is selectively reduced to the divalent state with a divalent chromium salt formed in situ from chromium(III) salt plus zinc amalgam. The other trivalent lanthanides are then extracted away from the divalent europium with a nitrogen-flushed phosphoric acid ester or a phosphonic acid ester. (AEC)

  15. Distribution, elimination, and renal effects of single oral doses of europium in rats.

    Science.gov (United States)

    Ohnishi, Keiko; Usuda, Kan; Nakayama, Shin; Sugiura, Yumiko; Kitamura, Yasuhiro; Kurita, Akihiro; Tsuda, Yuko; Kimura, Motoshi; Kono, Koichi

    2011-11-01

    Single doses of europium (III) chloride hexahydrate were orally administered to several groups of rats. Cumulative urine samples were taken at 0-24 h, and blood samples were drawn after 24-h administration. The europium concentration was determined in these samples by inductively coupled plasma atomic emission spectroscopy. The volume, creatinine, ß-2-microglobulin, and N-acetyl-ß-D-glucosaminidase were measured in the urine samples to evaluate possible europium-induced renal effects. The blood samples showed low europium distribution, with an average of 77.5 μg/L for all groups. Although the urinary concentration and excretion showed dose-dependent increases, the percentage of europium excreted showed a dose-dependent decrease, with an average of 0.31% in all groups. The administration of europium resulted in a significant decrease of creatinine and a significant increase of urinary volume, N-acetyl-ß-D-glucosaminidase, and ß-2-microglobulin. Rare earth elements, including europium, are believed to form colloidal conjugates that deposit in the reticuloendothelial system and glomeruli. This specific reaction may contribute to low europium bioavailability and renal function disturbances. Despite low bioavailability, the high performance of the analytical method for determination of europium makes the blood and urine sampling suitable tools for monitoring of exposure to this element. The results presented in this study will be of great importance in future studies on the health impacts of rare earth elements.

  16. Silicon carbide as platform for energy applications

    DEFF Research Database (Denmark)

    Syväjärvi, Mikael; Jokubavicius, Valdas; Sun, Jianwu

    Silicon carbide is emerging as a novel material for a range of energy and environmental technologies. Previously, silicon carbide was considered as a material mainly for transistor applications. We have initiated the use of silicon carbide material towards optoelectronics in general lighting and ...

  17. [Synthesis and luminescence properties of reactive ternary europium complexes].

    Science.gov (United States)

    Guo, Dong-cai; Shu, Wan-gen; Zhang, Wei; Liu, You-nian; Zhou, Yue

    2004-09-01

    In this paper, five new reactive ternary europium complexes were synthesized with the first ligand of 1,10-phenanthroline and the reactive second ligands of maleic anhydride, acrylonitrile, undecenoic acid, oleic acid and linoleic acid, and also characterized by means of elemental analysis, EDTA titrimetric method, FTIR spectra and UV spectra. The fluorescence spectra show that the five new ternary complexes have much higher luminescence intensity than their corresponding binary complexes, and the synergy ability sequence of the five reactive ligands is as follows: linoleic acid > oleic acid > acrylonitrile > maleic anhydride > undecenoic acid. At the same time, the reactive ternary europium complexes coordinated with the reactive ligands, which can be copolymerized with other monomers, will provide a new way for the synthesis of bonding-type rare earth polymer functional materials with excellent luminescence properties.

  18. Solvent extraction of europium(III) to a fluorine-free ionic liquid phase with a diglycolamic acid extractant

    OpenAIRE

    Rout, Alok; Souza, Ernesto Rezende; Binnemans, Koen

    2014-01-01

    Europium(III) was extracted by bis(2-ethylhexyl)diglycolamic acid (DEHDGA) dissolved in the non-fluorinated ionic liquid tetraoctylammonium dodecyl sulphate, [N8888][DS]. The extraction behaviour of europium(III) was investigated as a function of various parameters: pH, extractant concentration, concentration of the europium(III) ion in the aqueous feed and concentration of the salting-out agent. A comparison was made with extraction of europium(III) by the acidic extractants bis(2-ethylhexyl...

  19. Silver lead borate glasses doped with europium ions for phosphors ...

    Indian Academy of Sciences (India)

    2017-07-25

    Jul 25, 2017 ... Abstract. Europium (Eu3+) doped silver lead borate glasses with the composition of xEu2O3−(1 − x)Ag2. O−29PbO−70B2O3 (x = 0, 0.1, 0.2, 0.3, 0.4 and 0.5 mol%) have been successfully prepared by conventional melt quenching method. Thermal, structural and luminescence properties have been studied ...

  20. Silver lead borate glasses doped with europium ions for phosphors ...

    Indian Academy of Sciences (India)

    Europium (Eu 3 + ) doped silver lead borate glasses with the composition of x Eu 2 O 3 −( 1 − x )Ag 2 O−29PbO−70B 2 O 3 ( x = 0 , 0.1, 0.2, 0.3, 0.4 and 0.5 mol%) have been successfully prepared by conventional meltquenching method. Thermal, structural and luminescence properties have been studied using ...

  1. Synthesis and luminescence properties for europium oxide nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Mo Zunli, E-mail: mozl@163.com [Key Laboratory of Eco-Environment-Related Polymer Materials, Ministry of Education of China, Key Laboratory of Polymer Materials of Gansu Province, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070 (China) and State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi' an 710072 (China); Deng Zhepeng; Guo Ruibin [Key Laboratory of Eco-Environment-Related Polymer Materials, Ministry of Education of China, Key Laboratory of Polymer Materials of Gansu Province, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070 (China); Fu Qiangang [State Key Laboratory of Solidification Processing, Northwestern Polytechnical University, Xi' an 710072 (China); Feng Chao; Liu Pengwei; Sun Yu [Key Laboratory of Eco-Environment-Related Polymer Materials, Ministry of Education of China, Key Laboratory of Polymer Materials of Gansu Province, College of Chemistry and Chemical Engineering, Northwest Normal University, Lanzhou 730070 (China)

    2012-01-25

    Highlights: Black-Right-Pointing-Pointer A novel high temperature sensitive fluorescent CNTs/Eu{sub 2}O{sub 3} nanocomposite was fabricated. Black-Right-Pointing-Pointer The nanocomposite showed strong fluorescent emission peaks at around 540 and 580 nm after calcined beyond 620 Degree-Sign C for 4 h. Black-Right-Pointing-Pointer The ultrahigh fluorescence intensity of the nanocomposites resulted from a synergetic effect of CNTs and europium oxide. Black-Right-Pointing-Pointer We also discovered that CNTs had an effect of fluorescence quenching. - Abstract: A novel high temperature sensitive fluorescent nanocomposite has been successfully synthesized by an economic hydrothermal method using carbon nanotubes (CNTs), europium oxide, and sodium dodecyl benzene sulfonate (SDBS). To our great interest, the nanocomposites show high temperature sensitivity after calcinations at various temperatures, suggesting a synergetic effect of CNTs and europium oxide which leads to ultrahigh fluorescence intensity of europium oxide nanotubes. When the novel high temperature sensitive fluorescent nanocomposites were calcined beyond 620 Degree-Sign C for 4 h, the obtained nanocomposites have a strong emission peak at around 540 and 580 nm, due to the {sup 5}D{sub 0} {yields} {sup 7}F{sub j} (j = 0, 1) forced electric dipole transition of Eu{sup 3+} ions. In turn, the emission spectra showed a slight blue shift. The intensity of this photoluminescence (PL) band is remarkably temperature-dependent and promotes strongly beyond 620 Degree-Sign C. This novel feature is attributed to the thermally activated carrier transfer process from nanocrystals and charged intrinsic defects states to Eu{sup 3+} energy levels. The novel high temperature sensitive fluorescent nanocomposite has potential applications in high temperature warning materials, sensors and field emission displays. It is also interesting to discover that CNTs have the effect of fluorescence quenching.

  2. Optical and magnetization studies on europium based iron pnictides

    Energy Technology Data Exchange (ETDEWEB)

    Zapf, Sina Maria Ute

    2015-07-01

    The investigations carried out in the framework of this thesis mainly concentrate on europium based iron pnictides. These are a peculiar member of the 122 family as they develop at low temperatures (∝20K) an additional magnetic order of the local rare earth moments. Therefore, europium based iron pnictides provide a unique platform to study the interplay of structural, magnetic and electronic effects in high-temperature superconductors. For this challenging purpose, we have employed SQUID magnetometry and Fourier-transform infrared spectroscopy on EuFe{sub 2}(As{sub 1-x}P{sub x}){sub 2} single crystals. By systematic studies of the in- and out-of-plane magnetic properties of a series of single crystals, we derived the complex magnetic phase diagram of europium based iron pnictides, which contains an A-type antiferromagnetic and a re-entrant spin glass phase. Furthermore, we have investigated the magneto-optical properties of EuFe{sub 2}As{sub 2}, revealing a much more complex magnetic detwinning process than expected. These studies demonstrate a remarkable interdependence between magnetic, electronic and structural effects that might be very important to understand the unconventional superconductivity in these fascinating materials.

  3. Use of europium ions for SAD phasing of lysozyme at the Cu Kα wavelength

    OpenAIRE

    Vijayakumar, Balakrishnan; Velmurugan, Devadasan

    2012-01-01

    Europium(III) ions bound to the surface of hen egg-white lysozyme were found to exhibit good anomalous signal facilitating SAD phasing using laboratory-source data and automated model building. The europium ion-binding sites were observed up to the 15σ level.

  4. Enhancement in red emission at room temperature from europium doped ZnO nanowires by 1,10 phenanthroline-europium interface induced resonant excitations

    Directory of Open Access Journals (Sweden)

    Soumen Dhara

    2017-02-01

    Full Text Available We show that europium doped ZnO nanowires after surface modification with organic ligand, 1,10 phenanthroline (phen leads to strong red emission at 613 nm which is a characteristic emission from the atomic levels of Eu3+. Surface modification with phen leads to formation of phenanthroline-europium interface on the surface of the nanowires due to attachment of Eu3+ ions. After an optimized surface modification with phen, intensity of both the UV emission (band edge and red emission improved by two orders of magnitude at room temperature. We observed multiple energy transfer pathways to the energy levels of Eu3+ ions through the phenanthroline-europium interface, which found to be very effective to the significant enhancement of emission from the dopant Eu3+. This study shows a new insight in to the energy transfer process from phen to the europium doped ZnO system.

  5. Pathology of silicon carbide pneumoconiosis.

    Science.gov (United States)

    Massé, S; Bégin, R; Cantin, A

    1988-03-01

    Silicon carbide is a widely used synthetic abrasive manufactured by heating silica and coke in electric furnaces at 2400 degrees C. Until recently it had been considered a relatively inert dust in humans and animals. However, several roentgenologic surveys had revealed lesions similar to low-grade silicosis. A recent epidemiological study has revealed a 35% incidence of pulmonary problems. Tissues from three such workers were available for light microscopy. A mixed pneumoconiosis was found, and lesions can be summarized as follows: (a) abundance of intraalveolar macrophages associated with a mixture of inhaled particles including carbon, silicon, pleomorphic crystals, silicon carbide, and ferruginous bodies showing a thin black central core; (b) nodular fibrosis, generally profuse, containing silica and ferruginous bodies and associated with large amount of carbon pigment; (c) interstitial fibrosis, less prominent than the nodular form; (d) carcinoma in two cases. We believe this pneumoconiosis is sufficiently characteristic to be recognized as a distinct entity. The Stanton hypothesis on fiber properties and carcinogenesis could be applied to silicon carbide dust. At present, it appears that the occupational hazard is limited to the manufacturing process and powdered product used in some industries.

  6. Dual doped graphene oxide for electrochemical sensing of europium ion

    Science.gov (United States)

    Kumar, Sunil; Patra, Santanu; Madhuri, Rashmi; Sharma, Prashant K.

    2017-05-01

    This present work represents a single step hydrothermal method for the preparation of N, and N, S dual doped graphene oxide (GO). First time, a comparative electrochemical study between single dope and dual doped GO was carried out using potassium ferrocyanide as an electro-active probe molecule and found that the dual doped GO has the highest electrocatalytic activity than single doped, due to the presence of two heteroatoms as a doping material. Afterwards, the dual doped GO was successfully applied for the electrochemical detection of a rare earth element i.e. europium, with LOD value of 5.92 μg L-1.

  7. Crystal growth of nanoscaled europium selenide having characteristic crystal shapes

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Atsushi; Adachi, Taka-aki [Graduate School of Materials Science, Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma, Nara 630-0192 (Japan); Hasegawa, Yasuchika, E-mail: hasegawa@ms.naist.j [Graduate School of Materials Science, Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma, Nara 630-0192 (Japan); Kawai, Tsuyoshi [Graduate School of Materials Science, Nara Institute of Science and Technology, 8916-5 Takayama, Ikoma, Nara 630-0192 (Japan)

    2009-12-04

    Tetrapod-shaped EuSe nanocrystals were prepared through the thermal reduction of europium chloride an organic selenide complex, n-hexadecylamine, and two additives oleic acid and oleylamine. The obtained EuSe nanoparticles were characterized by X-ray diffraction (XRD). The crystal grain size from the XRD spectrum was estimated to be 50 nm. In contrast, observation of the transmission electron microscope (TEM) gave larger sized EuSe (average size: 200 nm). Anisotropic crystal-growth of EuSe nanocrystals was achieved by addition of a small amount of oleic acid in the crystal growth process.

  8. Silicon carbide fibers and articles including same

    Science.gov (United States)

    Garnier, John E; Griffith, George W

    2015-01-27

    Methods of producing silicon carbide fibers. The method comprises reacting a continuous carbon fiber material and a silicon-containing gas in a reaction chamber at a temperature ranging from approximately 1500.degree. C. to approximately 2000.degree. C. A partial pressure of oxygen in the reaction chamber is maintained at less than approximately 1.01.times.10.sup.2 Pascal to produce continuous alpha silicon carbide fibers. Continuous alpha silicon carbide fibers and articles formed from the continuous alpha silicon carbide fibers are also disclosed.

  9. Methods for producing silicon carbide fibers

    Science.gov (United States)

    Garnier, John E.; Griffith, George W.

    2016-03-01

    Methods of producing silicon carbide fibers. The method comprises reacting a continuous carbon fiber material and a silicon-containing gas in a reaction chamber at a temperature ranging from approximately 1500.degree. C. to approximately 2000.degree. C. A partial pressure of oxygen in the reaction chamber is maintained at less than approximately 1.01.times.10.sup.2 Pascal to produce continuous alpha silicon carbide fibers. Continuous alpha silicon carbide fibers and articles formed from the continuous alpha silicon carbide fibers are also disclosed.

  10. Photoprotective properties of the fluorescent europium complex in UV-irradiated skin.

    Science.gov (United States)

    Vogt, O; Lademann, J; Rancan, F; Meinke, M C; Schanzer, S; Stockfleth, E; Sterry, W; Lange-Asschenfeldt, B

    2013-01-01

    In this study, we compared the UV-protective abilities of the europium complex compared to titanium dioxide, which represents the most common physical filter for ultraviolet light in the broad-band spectral range. The UV absorption and light transformative capacities of the europium complex were evaluated using a spectrometer with a double-integrating sphere showing that the europium complex does not only absorb and reflect UV light, but transforms it into red and infrared light. It was found that the europium complex binds to the surface of Jurkat cells in vitro. Cells incubated with the europium complex showed a significantly higher viability after UVA and UVB irradiation as compared to untreated cells and cells incubated with titanium dioxide pointing out its photoprotective properties. The europium complex and titanium dioxide show similar penetration capacities into the stratum corneum as tested in human and porcine skin using tape stripping analysis. The europium complex has proved to be an efficient UV filter with a low cyto- and phototoxic profile and therefore represents a potential candidate for use in sunscreen formulations. Copyright © 2013 S. Karger AG, Basel.

  11. Low-voltage cathodoluminescence of europium-activated yttrium orthovanadate

    Energy Technology Data Exchange (ETDEWEB)

    Phillips, M.L.F.

    1995-03-01

    Emissive flat panel display systems operating in full color demand higher performance at low voltages (ca. 501000 V) from cathodoluminescent (CL) phosphors than cathode ray tubes require. Hydrothermal synthesis has been suggested as a route to phosphors with improved efficiencies, lower voltage thresholds, and increased saturation power. This hypothesis was tested in europium-doped yttrium orthovanadate (YVO{sub 4}:Eu), an efficient, red emitting CL phosphor. The CL efficiency of YVO{sub 4}:Eu crystallized from aqueous solution at 200{degrees}C is relatively low until it is annealed. The distribution of particle sizes in the low-temperature phosphor is similar to that in material made via a solid-state route, but crystallites remain much smaller (ca. 400 {Angstrom}) until they are annealed. These observations, along with the anomalously strong dependence of CL intensity on europium concentration, support a model in which efficiency principally depends on crystallite size. CL efficiency of both solid state and hydrothermal YVO{sub 4}:Eu increases with voltage at constant power. Surface-bound electrons are likely the dominant influence on efficiency at voltages near threshold. Saturation power is independent of synthetic route. It is apparent that the CL properties of hydrothermally synthesized YVO{sub 4}:Eu are essentially the same as those of YVO{sub 4}:Eu produced via conventional, high-temperature routes.

  12. In Vivo Toxicity Studies of Europium Hydroxide Nanorods in Mice

    Science.gov (United States)

    Patra, Chitta Ranjan; Abdel Moneim, Soha S.; Wang, Enfeng; Dutta, Shamit; Patra, Sujata; Eshed, Michal; Mukherjee, Priyabrata; Gedanken, Aharon; Shah, Vijay H; Mukhopadhyay, Debabrata

    2009-01-01

    Lanthanide nanoparticles and nanorods have been widely used for diagnostic and therapeutic applications in biomedical nanotechnology due to their fluorescence properties and pro-angiogenic to endothelial cells, respectively. Recently, we have demonstrated that europium (III) hydroxide [EuIII(OH)3] nanorods, synthesized by the microwave technique and characterized by several physico-chemical techniques, can be used as pro-angiogenic agents which introduce future therapeutic treatment strategies for severe ischemic heart/limb disease, and peripheral ischemic disease. The toxicity of these inorganic nanorods to endothelial cells was supported by several in vitro assays. To determine the in vivo toxicity, these nanorods were administered to mice through intraperitoneal injection (IP) everyday over a period of seven days in a dose dependent (1.25 to 125 mgKg−1day−1) and time dependent manner (8–60 days). Bio-distribution of europium elements in different organs was analyzed by inductively coupled plasma mass spectrometry (ICPMS). Short-term (S-T) and long-term (L-T) toxicity studies (mice sacrificed on day 8 and 60 for S-T and L-T, respectively) show normal blood hematology and serum clinical chemistry with the exception of a slight elevation of liver enzymes. Histological examination of nanorod treated vital organs (liver, kidney, spleen and lungs) showed no or only mild histological changes that indicate mild toxicity at the higher dose of nanorods. PMID:19616569

  13. Temperature dependences in electron-stimulated desorption of neutral europium

    CERN Document Server

    Ageev, V N; Madey, T E

    2003-01-01

    The electron-stimulated desorption (ESD) yield for neutral europium (Eu) atoms from Eu layers adsorbed on oxygen-covered tungsten surfaces has been measured as a function of electron energy, europium coverage and degree of oxidation of tungsten, with an emphasis on effects of substrate temperature. The measurements have been carried out using a time-of-flight method and surface ionization detector. We expand on an earlier report, and compare ESD of multivalent Eu with ESD of monovalent alkali atoms, studied previously. The Eu atom ESD is a complicated function of Eu coverage, electron energy and substrate temperature. In the coverage range 0.05-0.35 monolayer (ML), overlapping resonant-like Eu atom yield peaks are observed at electron energies E sub e of 36 and 41 eV that might be associated with Eu or W shallow core level excitations. Additional resonant-like peaks are seen at E sub e of 54 and 84 eV that are associated with W 5p and 5s level excitations. The Eu atom yield peaks at 36 and 41 eV are seen only...

  14. The Oxidation State of Europium in Halide Glasses

    Science.gov (United States)

    Weber, J.K.R.; Vu, M.; Paßlick, C.; Schweizer, S.; Brown, D.E.; Johnson, C.E.; Johnson, J.A.

    2012-01-01

    The luminescent properties of divalent europium ions can be exploited to produce storage phosphors for x-ray imaging applications. The relatively high cost and limited availability of divalent europium halides makes it desirable to synthesize them from the readily available trivalent salts. In this work, samples of pure EuCl3 and fluoride glass melts doped with EuCl3 were processed at 700-800 °C in an inert atmosphere furnace. The Eu oxidation state in the resulting materials was determined using fluorescence and Mössbauer spectroscopy. Heat treatment of pure EuCl3 for 10 minutes at 710 °C resulted in a material comprising approximately equal amounts of Eu2+ and Eu3+. Glasses made using mixtures of EuCl2 and EuCl3 in the starting material contained both oxidation states. This paper describes the sample preparation and analysis and discusses the results in the context of chemical equilibria in the melts. PMID:22101252

  15. Innovative triboluminescence study of multivitamin doped europium tetrakis

    Energy Technology Data Exchange (ETDEWEB)

    Fontenot, R.S. [Alabama A and M University, Department of Physics, Chemistry, and Mathematics, P.O. Box 1268, Normal, Alabama 35762 (United States); University of Louisiana at Lafayette, Department of Physics, P.O. Box 44210, Lafayette, LA 70504 (United States); Bhat, K.N.; Aggarwal, M.D. [Alabama A and M University, Department of Physics, Chemistry, and Mathematics, P.O. Box 1268, Normal, Alabama 35762 (United States); Hollerman, W.A. [University of Louisiana at Lafayette, Department of Physics, P.O. Box 44210, Lafayette, LA 70504 (United States)

    2012-05-15

    As the Space Shuttle program ends, NASA is developing the next generation of space vehicles. These new concept designs will require new and innovative structural health monitoring capabilities. One way to solve this problem is with smart impact sensors that use triboluminescent materials. In 2011, the authors reported an 82% increase in the triboluminescence yield of europium dibenzoylmethide triethylammonium (EuD{sub 4}TEA) by changing the starting material. It has been shown that introduction of dopants tends to enhance the triboluminescent light yield. Here we report the successful synthesis of a multivitamin doped europium tetrakis which appears to be spherical in shape. Inductively Coupled Plasma - Optical Emission Spectroscopy analysis showed the presence of 3.6% calcium, 0.62% magnesium, 0.1% iron, 0.01% copper and manganese. This new product has no shift in the triboluminescent or photoluminescent emission peaks, but only a change in the intensity. In addition, the doped EuD{sub 4}TEA powder statistically emits more triboluminescence while having the same decay time. (copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  16. Hydroxide catalysis bonding of silicon carbide

    NARCIS (Netherlands)

    Veggel, A.A. van; Ende, D.A. van den; Bogenstahl, J.; Rowan, S.; Cunningham, W.; Gubbels, G.H.M.; Nijmeijer, H.

    2008-01-01

    For bonding silicon carbide optics, which require extreme stability, hydroxide catalysis bonding is considered [Rowan, S., Hough, J. and Elliffe, E., Silicon carbide bonding. UK Patent 040 7953.9, 2004. Please contact Mr. D. Whiteford for further information: D.Whiteford@admin.gla.ac.uk]. This

  17. Photoactive thin films of polycaprolactam doped with europium (III) complex using phenylalanine as ligand

    Energy Technology Data Exchange (ETDEWEB)

    Santos Garcia, Irene Teresinha, E-mail: irene@iq.ufrgs.br [Departamento de Fisico-Quimica, Instituto de Quimica, Universidade Federal do Rio Grande do Sul, Av. Bento Goncalves 9500, Bairro Agronomia, CEP 91501-970, Porto Alegre, RS (Brazil); Velleda Ribeiro, Patricia; Silva Correa, Diogo; Neto da Cunha, Igor Michel; Lenin Villarreal Carreno, Neftali [Instituto de Quimica e Geociencias, Universidade Federal de Pelotas, Campus Capao do Leao, s/n. CEP 96010-900, Pelotas, RS (Brazil); Ceretta Moreira, Eduardo [PPGEE, Universidade Federal do Pampa, Campus Bage, Bage- RS (Brazil); Severo Rodembusch, Fabiano [Departamento de Quimica Organica, Instituto de Quimica, Universidade Federal do Rio Grande do Sul, Av. Bento Goncalves 9500, Bairro Agronomia, CEP 91501-970, Porto Alegre, RS (Brazil)

    2011-12-01

    A photoactive complex based on europium(III) using the amino acid phenylalanine as ligand was prepared and characterized. The obtained europium(III)/phenylalanine complex presents an effective energy transfer from ligands to the rare earth center. The observed photoluminescent behavior for europium(III)/phenylalanine complex was similar to the well known europium(III)/ acetyl-{beta}-acetonate hydrate. New photoactive polyamide thin films were prepared using polycaprolactam as host of these complexes. The structural characterizations of the films were studied through Rutherford backscattering (RBS), Fourier transform infrared (FTIR) and Raman spectroscopies. The polyamide films doped with the amino acid and acetyl-{beta}-acetonate rare earth complexes maintain the original photoluminescent behavior, narrow emission bands corresponding to transitions {sup 5}D{sub 0} {yields} {sup 7}F{sub 0-4}, which indicates that this polymer is an excellent host to these complexes.

  18. Synthesis and luminescence properties of salicylaldehyde isonicotinoyl hydrazone derivatives and their europium complexes.

    Science.gov (United States)

    Shan, Wenfei; Liu, Fen; Liu, Jiang; Chen, Yanwen; Yang, Zehui; Guo, Dongcai

    2015-09-01

    Four novel salicylaldehyde isonicotinoyl hydrazone derivatives and their corresponding europium ion complexes were synthesized and characterized, while the luminescence properties and the fluorescence quantum yields of the target complexes were investigated. The results indicated that the ligands favored energy transfers to the emitting energy level of europium ion, and four target europium complexes showed the characteristic luminescence of central europium ion. Besides the luminescence intensity of the complex with methoxy group, which possessed the highest fluorescence quantum yield (0.522), was stronger than that of other complexes. Furthermore, the electrochemical properties of the target complexes were further investigated by cyclic voltammetry, the results indicated that the highest occupied molecular orbital (HOMO), lowest unoccupied molecular orbital (LUMO) energy levels and the oxidation potential of the complexes with electron donating group increased, however, that of the complexes with accepting electron group decreased. Copyright © 2015 Elsevier Inc. All rights reserved.

  19. [Synthesis and luminescence properties of ternary complexes of europium with aromatic carboxylic acid and acrylonitrile].

    Science.gov (United States)

    Guo, Dong-cai; Yi, Li-ming; Shu, Wan-gen; Zhang, Zhen-zhen; Zeng, Zhao-rong; Zhang, Xi-qian

    2006-11-01

    Five ternary complexes were synthesized from europium with aromatic carboxylic acid (p-methylbenzoic acid, methoxybenzoic acid, m-chlorobenzoic acid and benzoic acid, p-hydroxylbenzoic acid) and acrylonitrile, and characterized by means of elemental analysis, thermal analysis, FTIR spectra and UV spectra. The fluorescence spectra show that five ternary complexes have good luminescence properties, and the sequence of the ability of the aromatic carboxylic acids to transfer light energy to europium ion is as follows: p-methylbenzoic acid>benzoic acid>m-chlorobenzoic acid>p-hydroxylbenzoic acid>methoxybenzoic acid. Meanwhile, the ternary europium complexes containing a reactive ligand acrylonitrile will possibly have a potential application to the fabrication of bonding-type europium polymer luminescent materials.

  20. Optical characterization of europium-doped indium hydroxide nanocubes obtained by Microwave-Assisted Hydrothermal method

    OpenAIRE

    Motta, Fabiana Villela da; Marques,Ana Paula de Azevedo; Araújo,Vinícius Dantas de; Tavares, Mara Tatiane De Souza; Delmonte,Mauricio Roberto Bomio; Paskocimas, Carlos Alberto; Li, Máximo Siu; Nascimento, Rubens Maribondo do; Longo, Elson [UNESP

    2014-01-01

    Crystalline europium-doped indium hydroxide (In(OH)3:Eu) nanostructures were prepared by rapid and efficient Microwave-Assisted Hydrothermal (MAH) method. Nanostructures were obtained at low temperature. FE-SEM images confirm that these samples are composed of 3D nanostructures. XRD, optical diffuse reflectance and photoluminescence (PL) measurements were used to characterize the products. Emission spectra of europium-doped indium hydroxide (IH:xEu) samples under excitation (350.7 nm) present...

  1. Structural and optical properties of europium doped zirconia single crystals fibers grown by laser floating zone

    OpenAIRE

    Soares, M.R.N.; Nico, C.; Peres, M.; Ferreira, N.; Fernandes, A.J.S.; Monteiro, T.; COSTA, F.M.

    2011-01-01

    Yttria stabilized zirconia single crystal fibers doped with europium ions were developed envisaging optical applications. The laser floating zone technique was used in order to grow millimetric high quality single crystal fibers. The as-grown fibers are completely transparent and inclusion free, exhibiting a cubic structure. Under ultraviolet (UV) excitation, a broad emission band appears at 551 nm. The europium doped fibers are translucent with a tetragonal structure and exhibit an intense r...

  2. A non-aqueous reduction process for purifying ¹⁵³Gd produced in natural europium targets.

    Science.gov (United States)

    Johnsen, Amanda M; Soderquist, Chuck Z; McNamara, Bruce K; Fisher, Darrell R

    2013-12-01

    Gadolinium-153 is a low-energy gamma-emitter used in nuclear medicine imaging quality assurance. Produced in nuclear reactors using natural Eu₂O₃ targets, ¹⁵³Gd is radiochemically separated from europium isotopes by europium reduction. However, conventional aqueous europium reduction produces hydrogen gas, a flammability hazard in radiological hot cells. We altered the traditional reduction method, using methanol as the process solvent to nearly eliminate hydrogen gas production. This new, non-aqueous reduction process demonstrates greater than 98% europium removal and gadolinium yields of 90%. © 2013 Elsevier Ltd. All rights reserved.

  3. Intercalated europium metal in epitaxial graphene on SiC

    Science.gov (United States)

    Anderson, Nathaniel A.; Hupalo, Myron; Keavney, David; Tringides, Michael C.; Vaknin, David

    2017-10-01

    X-ray magnetic circular dichroism (XMCD) reveals the magnetic properties of intercalated europium metal under graphene on SiC(0001). The intercalation of Eu nanoclusters (average size 2.5 nm) between graphene and SiC substate are formed by deposition of Eu on epitaxially grown graphene that is subsequently annealed at various temperatures while keeping the integrity of the graphene layer. Using sum-rules analysis of the XMCD of Eu M4 ,5 edges at T =15 K, our samples show paramagnetic-like behavior with distinct anomaly at T ≈90 K, which may be related to the Nèel transition, TN=91 K, of bulk metal Eu. We find no evidence of ferromagnetism due to EuO or antiferromagnetism due to Eu2O3 , indicating that the graphene layer protects the intercalated metallic Eu against oxidation over months of exposure to atmospheric environment.

  4. Uranium Carbide Powder Ignition Studies

    Energy Technology Data Exchange (ETDEWEB)

    Berthinier, C.; Coullomb, S.; Rado, C.; Le Guyadec, F. [CEA, DEN, DTEC, SDTC, LEME, F-30207 Bagnols-sur-Ceze (France); Chatillon, C.; Blanquet, E.; Boichot, R. [SIMAP, Sciences et Ingenierie des Materiaux et Procedes, INPG-CNRS-UJF ENSEEG, BP 75, 38402 St Martin-d' Heres (France)

    2009-06-15

    Mixed (U, Pu) carbide, constituted by means of 80% of uranium monocarbide (UC), is considered as a possible fuel material for future gas fast reactors or sodium fast reactor. However, UC undergoes a strong exothermic reaction with air and fine powders of UC are pyrophoric. Thus, it is necessary to understand this high reactivity in order to determine safe handling conditions for the production and reprocessing of carbide fuels. UC powder was obtained by arc melting and milling. The reactivity of uranium carbide was studied in oxidizing atmosphere and different experimental devices were used to determine ignition temperatures. The phases formed at the various observed stages of the oxidation process were determined by post-mortem X ray diffraction analysis. Studies were first performed using small quantities of UC powder (around 50 mg) in Differential Thermal Analysis / Thermogravimetric Analysis (DTA/TGA) and Differential Scanning Calorimetry (DSC). Experiments were realized using different parameters, such as heating rate and gas flow rate and composition, to determine their influence on pyro-phoricity. Results obtained with small quantities (tens of milligrams) revealed that UC powder is highly reactive in air in the range 200- 250 deg. C. Studies were also performed in the 'Pyro' test facility multi-function furnace allowing CCD camera recording, during heating and ignition, through view-ports. Lower ignition temperatures, around 100 deg. C, were obtained using around 1 g UC powder samples. Results are discussed and analysed with theory of burning curve ignition and numerical simulations. Simulations aim to understand the influence of the different parameters on pyro-phoricity. Small scale simulations (on a spherical grain) confirm the influence of UC grains size, heat rate and gas composition on powder ignition temperature with small quantities. The issue is now to understand the influence of grain pile form factor and volume on the pyro-phoricity of

  5. Thermal Expansion of Hafnium Carbide

    Science.gov (United States)

    Grisaffe, Salvatore J.

    1960-01-01

    Since hafnium carbide (HfC) has a melting point of 7029 deg. F, it may have many high-temperature applications. A literature search uncovered very little information about the properties of HfC, and so a program was initiated at the Lewis Research Center to determine some of the physical properties of this material. This note presents the results of the thermal expansion investigation. The thermal-expansion measurements were made with a Gaertner dilatation interferometer calibrated to an accuracy of +/- 1 deg. F. This device indicates expansion by the movement of fringes produced by the cancellation and reinforcement of fixed wave-length light rays which are reflected from the surfaces of two parallel quartz glass disks. The test specimens which separate these disks are three small cones, each approximately 0.20 in. high.

  6. 40 CFR 721.9511 - Silicic acid (H6SiO2O7), magnesium, strontium salt(1:1:2), dysprosium and europium-doped.

    Science.gov (United States)

    2010-07-01

    ..., strontium salt(1:1:2), dysprosium and europium-doped. 721.9511 Section 721.9511 Protection of Environment...), magnesium, strontium salt(1:1:2), dysprosium and europium-doped. (a) Chemical substance and significant new..., strontium salt(1:1:2), dysprosium and europium-doped. (PMN P-98-848; CAS No.181828-07-9) is subject to...

  7. Fluorescent lifetime imaging microscopy using Europium complexes improves atherosclerotic plaques discrimination.

    Science.gov (United States)

    Sicchieri, Letícia Bonfante; de Andrade Natal, Rodrigo; Courrol, Lilia Coronato

    2016-10-01

    The objective of this study is to characterize arterial tissue with and without atherosclerosis by fluorescence lifetime imaging microscopy (FLIM) using Europium Chlortetracycline complex (EuCTc) as fluorescent marker. For this study, twelve rabbits were randomly divided into a control group (CG) and an experimental group (EG), where they were fed a normal and hypercholesterolemic diet, respectively, and were treated for 60 days. Cryosections of the aortic arch specimens were cut in a vertical plane, mounted on glass slides, and stained with Europium (Eu), Chlortetracycline (CTc), Europium Chlortetracycline (EuCTc), and Europium Chlortetracycline Magnesium (EuCTcMg) solutions. FLIM images were obtained with excitation at 405 nm. The average autofluorescence lifetime within plaque depositions was ~1.36 ns. Reduced plaque autofluorescence lifetimes of 0.23 and 0.31 ns were observed on incubation with EuCTc and EuCTcMg respectively. It was observed a quenching of collagen, cholesterol and TG emission spectra increasing EuCTc concentration. The drastic reduction in fluorescence lifetimes is due to a resonant energy transfer between collagen, triglycerides, cholesterol and europium complexes, quenching fluorescence.

  8. Visible-light sensitized luminescent europium(III)-β-diketonate complexes: bioprobes for cellular imaging.

    Science.gov (United States)

    Reddy, M L P; Divya, V; Pavithran, Rani

    2013-11-21

    Visible-light sensitized luminescent europium(III) molecular materials are of considerable importance because their outstanding photophysical properties make them well suited as labels in fluorescence-based bioassays and low-voltage driven pure red-emitters in optoelectronic technology. One challenge in this field is development of visible-light sensitizing ligands that can form highly emissive europium(III) complexes with sufficient stability and aqueous solubility for practical applications. Indeed, some of the recent reports have demonstrated that the excitation-window can be shifted to longer-wavelengths in europium(III)-β-diketonate complexes by appropriate molecular engineering and suitably expanded π-conjugation in the complex molecules. In this review, attention is focused on the latest innovations in the syntheses and photophysical properties of visible-light sensitized europium(III)-β-diketonate complexes and their application as bioprobes for cellular imaging. Furthermore, luminescent nanomaterials derived from long-wavelength sensitized europium(III)-β-diketonate complexes and their application in life sciences are also highlighted.

  9. The electronic properties of mixed valence hydrated europium chloride thin film.

    Science.gov (United States)

    Silly, M G; Charra, F; Lux, F; Lemercier, G; Sirotti, F

    2015-07-28

    We investigate the electronic properties of a model mixed-valence hydrated chloride europium salt by means of high resolution photoemission spectroscopy (HRPES) and resonant photoemission spectroscopy (RESPES) at the Eu 3d → 4f and 4d → 4f transitions. From the HRPES spectra, we have determined that the two europium oxidation states are homogeneously distributed in the bulk and that the hydrated salt film is exempt from surface mixed valence transition. From the RESPES spectra, the well separated resonant contributions characteristic of divalent and trivalent europium species (4f(6) and 4f(7) final states, respectively) are accurately extracted and quantitatively determined from the resonant features measured at the two edges. The partial absorption yield spectra, obtained by integrating the photoemission intensity in the valence-band region, can be well reproduced by atomic multiplet calculation at the M(4,5) (3d-4f) absorption edge and by an asymmetric Fano-like shape profile at the N(4,5) (4d-4f) absorption edge. The ratio of Eu(2+) and Eu(3+) species measured at the two absorption edges matches with the composition of the mixed valence europium salt as determined chemically. We have demonstrated that the observed spectroscopic features of the mixed valence salt are attributed to the mixed-valence ground state rather than surface valence transition. HRPES and RESPES spectra provide reference spectra for the study of europium salts and their derivatives.

  10. Europium-doped calcium titanate: Optical and structural evaluations

    Energy Technology Data Exchange (ETDEWEB)

    Mazzo, Tatiana Martelli; Pinatti, Ivo Mateus [INCTMN, LIEC, Departamento de Química, Universidade Federal de São Carlos, P.O. Box 676, 13565-905 São Carlos, SP (Brazil); Macario, Leilane Roberta [INCTMN, LIEC, Instituto de Química, Universidade Estadual Paulista, P.O. Box 355, 14800-900 Araraquara, SP (Brazil); Avansi, Waldir [Centro de Ciências Exatas e de Tecnologia, Departamento de Física, Universidade Federal de São Carlos, Jardim Guanabara, 13565-905 São Carlos, SP (Brazil); Moreira, Mario Lucio [Instituto de Física e Matemática, Universidade Federal de Pelotas, P.O. Box 354, Campus do Capão do Leão, 96001-970 Pelotas, RS (Brazil); Rosa, Ieda Lucia Viana, E-mail: ilvrosa@ufscar.br [INCTMN, LIEC, Departamento de Química, Universidade Federal de São Carlos, P.O. Box 676, 13565-905 São Carlos, SP (Brazil); Mastelaro, Valmor Roberto [Instituto de Física de São Carlos, Departamento de Física e Ciência dos Materiais, Universidade de São Paulo, P.O. Box 369, Av Trabalhador São Carlense 400, 13560-970 São Carlos, SP (Brazil); Varela, José Arana; Longo, Elson [INCTMN, LIEC, Instituto de Química, Universidade Estadual Paulista, P.O. Box 355, 14800-900 Araraquara, SP (Brazil)

    2014-02-05

    Highlights: • CaTiO{sub 3}:Eu{sup 3+} were obtained using low temperatures and very short reactional times. • The Eu{sup 3+} changes the local order–disorder of the [TiO{sub 6}] and [CaO{sub 12}] clusters. • Lifetime decay curves reveal two sites of symmetry of the Eu{sup 3+} in the CT matrix. • CaTiO{sub 3}:Eu{sup 3+} exhibit the strongest luminescent intensity and pure red color. -- Abstract: Pure Calcium Titanate (CT-pure) and Europium doped Calcium Titanate Ca{sub 1−x}Eu{sub x}TiO{sub 3} (x = 0.5%, 1.0% and 2.0% molar ratio of Eu{sup 3+} ions) powders were synthesized by hydrothermal microwave method (HTMW) at 140 °C for 8 min. The HTMW method appears to be an efficient method to prepare the luminescence materials using low temperatures and very short reactional times. In addition it is possible to determine specific correlations imposed by TiCl{sub 4} replacement by titanium isopropoxide [Ti(OC{sub 3}H{sub 7}){sub 4}] changing the reaction character and resulting in two different options of europium doping CT syntesis. To evaluate the influence of the structural order–disorder among the reactions and different properties of these materials, the following techniques were used for characterization. XANES spectroscopy that revealed that the introduction of Eu{sup 3+} ions into the CT lattice induces to significant changes in the local order–disorder around both, [TiO{sub 6}] and [CaO{sub 12}], complex clusters. PL spectra show Eu{sup 3+} emission lines ascribed to the Eu{sup 3+} transitions from {sup 5}D{sub 0} excited states to {sup 7}F{sub J} (J = 0, 1–4) fundamental states in CT:Eu{sup 3+} powders excited at 350 and 394 nm.

  11. RBS and RNRA studies on sorption of europium by apatite

    Energy Technology Data Exchange (ETDEWEB)

    Ohnuki, Toshihiko; Kozai, Naofumi; Isobe, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Murakami, Takashi; Yamamoto, Shunya; Aoki, Yasushi; Naramoto, Hiroshi

    1997-03-01

    The sorption mechanism of europium, alternative of trivalent TRU has been studied based on the depth profiles of elements obtained by Rutherford Backscattering Spectroscopy (RBS) and Resonant Nuclear Reaction Analysis (RNRA). The positive peak for Eu and the negative peak for Ca were observed in the subtracted RBS spectra of the apatites on which Eu was sorbed from that of the fresh apatite. This indicates that Eu was sorbed on apatite, while a fraction of Ca was released from apatite. The peak height for Eu in the RBS spectrum of the apatite obtained at 75degC was higher than that of the apatite at 40degC. The depth profile of hydrogen of the apatite on which Eu was sorbed was similar to that of the fresh apatite. The concentration of Eu in the solution decreased with increasing temperature. On the contrary, the concentration of Ca increased with increasing temperature. Thus, it is concluded that a fraction of Eu is exchanged for Ca in the structure of apatite. (author)

  12. Spectrofluorimetric determination of heparin using doxycycline-europium probe

    Energy Technology Data Exchange (ETDEWEB)

    Li Jing [Department of Chemistry, Shandong Normal University, Jinan 250014 (China); Liu Jinkai [Department of Chemistry, Shandong Normal University, Jinan 250014 (China); Zhu Xiaojing [Department of Chemistry, Shandong Normal University, Jinan 250014 (China); Peng Qian [Department of Chemistry, Shandong Normal University, Jinan 250014 (China); Jiang Chongqiu [Department of Chemistry, Shandong Normal University, Jinan 250014 (China)]. E-mail: jiangchongqiu@sdnu.edu.cn

    2005-06-15

    A new spectrofluorimetric method was developed for the determination of the trace amount of heparin (Hep). Using doxycycline (DC)-europium ion (Eu{sup 3+}) as a fluorescent probe, in the buffer solution of pH=8.9, Hep can remarkably enhance the fluorescence intensity of the DC-Eu{sup 3+} complex at {lambda}=612 nm and the enhanced fluorescence intensity of Eu{sup 3+} ion is in proportion to the concentration of Hep. Optimum conditions for the determination of Hep were also investigated. The linear range and detection limit for the determination of Hep are 0.04-0.8 {mu}g/mL and 19.7 ng/mL, respectively. This method is simple, practical, and relatively free of interference from coexisting substances and can be successfully applied to assess Hep in biological samples. By the Rosenthal graphic method, the association constant and binding numbers of Hep with the probe are 6.60x10{sup 4} L/mol and 33.9. Moreover, the enhancement mechanism of the fluorescence intensity in the DC-Eu{sup 3+} system and the DC-Eu{sup 3+}-Hep-CTMAB system have been also discussed.

  13. Extraction of americium and europium by CMPO-substituted adamantylcalixarenes

    Energy Technology Data Exchange (ETDEWEB)

    Babain, V.A.; Alyapyshev, M.Yu.; Karavan, M.D. [V.G. Khlopin Radium Inst., St. Petersburg (Russian Federation); Boehmer, V.; Wang, L. [Johannes Guttenberg Univ., Mainz (Germany); Shokova, E.A.; Motornaya, A.E.; Vatsouro, I.M.; Kovalev, V.V. [M. V. Lomonosov Moscow State Univ., Moscow (Russian Federation)

    2005-07-01

    Eight p-adamantylcalix[4]arene derivatives, bearing four CMPO-like functions [-(CH{sub 2}){sub n}-NH-C(O)-CH{sub 2-}P(O)Ph{sub 2}] at the wide (4a,b, n = 0, 1) or narrow (5a-c and 6a-c, n = 2-4) rims were synthesized for the first time. Studies of the extraction of americium(III) and europium(III) from 3 M HNO{sub 3} solutions to organic phases (dichloromethane, m-nitro-trifluoromethylbenzene) showed: (i) The extraction ability for all the adamantylcalixarene ligands is much better than for their monomeric analogues -N-(1-adamantyl)-, N-(1-adamantylmethyl)- and N,N-(dibutyl)carbamoylmethyldiphenylphosphine oxides 7a, 7b, 8; (ii) The extraction percentage increases strongly with increasing length of the spacer for all types of ligands 4-6, and best extraction results were found for 4b (n = 1) and 5c (n = 4); (iii) The separation coefficient D{sub Am}/D{sub Eu} for the investigated compounds did not exceed 2, which is close to the narrow rim CMPO calixarenes, studied earlier; (iv) Variation of the spacer length between CMPO groups attached to the 1,3- and 2,4-positions of the calixarene platform in 6 did not lead to appreciably improved extractants, neither with respect to the extraction abilities (D) nor to the selectivities (D{sub Am}/D{sub Eu}). (orig.)

  14. Preparation of europium-labelled DNA probes and their properties.

    Science.gov (United States)

    Hurskainen, P; Dahlén, P; Ylikoski, J; Kwiatkowski, M; Siitari, H; Lövgren, T

    1991-01-01

    A chemical method for labelling DNA with a europium chelate is presented. First, primary aliphatic amino groups are introduced onto DNA in a transamination reaction. The transamination reaction is altered by adjusting temperature and duration of the reaction. Subsequently, the modified DNA is reacted with an isothiocyanate derivative of a Eu chelate. The optimum amount of Eu chelates on a DNA probe is 4-8% of total nucleotides. There is a decrease of 0.7 degrees C in the melting temperature of DNA for each incorporated Eu chelate on 100 bases. Hybridization efficiency is lowered by the introduction of Eu chelates but this effect can be partly overcome by using high DNA probe concentrations. The detection limit of the Eu-labelled probe is 0.15 attomoles of target DNA in a mixed-phase hybridization assay on microtitration wells. In addition to high sensitivity the Eu-labelled probes offer convenience in use and results which are quantitative and easy to interpret. PMID:1826948

  15. Chloride, bromide and iodide scintillators with europium doping

    Science.gov (United States)

    Zhuravleva, Mariya; Yang, Kan

    2014-08-26

    A halide scintillator material is disclosed where the halide may comprise chloride, bromide or iodide. The material is single-crystalline and has a composition of the general formula ABX.sub.3 where A is an alkali, B is an alkali earth and X is a halide which general composition was investigated. In particular, crystals of the formula ACa.sub.1-yEu.sub.yI.sub.3 where A=K, Rb and Cs were formed as well as crystals of the formula CsA.sub.1-yEu.sub.yX.sub.3 (where A=Ca, Sr, Ba, or a combination thereof and X=Cl, Br or I or a combination thereof) with divalent Europium doping where 0.ltoreq.y.ltoreq.1, and more particularly Eu doping has been studied at one to ten mol %. The disclosed scintillator materials are suitable for making scintillation detectors used in applications such as medical imaging and homeland security.

  16. Spectrofluorimetric determination of lecithin using a tetracycline-europium probe

    Energy Technology Data Exchange (ETDEWEB)

    Wang Ting [Department of Chemistry, Shandong Normal University, Jinan, Shandong 250014 (China); Jiang Chongqiu [Department of Chemistry, Shandong Normal University, Jinan, Shandong 250014 (China)]. E-mail: jiangchongqiu@sdnu.edu.cn

    2006-03-02

    Trace amount of lecithin (PC) was determined in the buffer solution of pH 5.7, using tetracycline (TC)-europium ion (Eu{sup 3+}) as a fluorescent probe. PC can remarkably enhance the fluorescence intensity of the TC-Eu{sup 3+} complex at {lambda} = 612 nm and the enhanced fluorescence intensity of Eu{sup 3+} is in proportion to the concentration of PC. Optimum conditions for the determination of PC were also investigated. The linear range and detection limit for the determination of PC are 4.0 x 10{sup -7} to 1.4 x 10{sup -5} mol/L and 3.9 x 10{sup -8} mol/L. This method is simple, practical and relatively free of interference from coexisting substances and can be successfully applied to assess PC in serum samples. Moreover, the enhancement mechanism of the fluorescence intensity in the TC-Eu{sup 3+} system, the TC-Eu{sup 3+}-PC system, and the TC-Eu{sup 3+}-PC-sodium dodecyl benzene sulfonate (SDS) system is also discussed.

  17. Artifacts in the determination of the binding of americium and europium to an aquatic fulvic acid

    Energy Technology Data Exchange (ETDEWEB)

    Lead, J.R.; Hamilton-Taylor, J.; Kelly, M. [Institute of Environmental and Biological Sciences, Lancaster University, Lancaster (United Kingdom)

    1995-11-23

    The binding of europium and americium by an aquatic fulvic acid was investigated using an equilibrium ion exchange technique (Schubert`s method). The results for europium were consistent with literature data. Americium gave anomalous results for both the D{sub o} values (partition coefficient of the metal between the resin and solution phases in the absence of the fulvic acid) and D values (partition coefficient of the metal between the resin and solution phases in the presence of the fulvic acid). The values for americium were unexpectedly low and, in the case of D values, only slightly pH dependent. The cause of the discrepancy was found to be the partial dissolution of the resin or the loss of small colloidal material from the resin. The effects on the europium results were minimal due to the use of lower resin weights and higher metal concentrations

  18. Synthesis and luminescence properties of 2-(benzylcarbamoyl)phenyl derivatives and their europium complexes.

    Science.gov (United States)

    Guo, Dongcai; He, Wei; Liu, Bang; Gou, Lining; Li, Ruixia

    2013-01-01

    Six novel 2-(benzylcarbamoyl)phenyl derivatives were synthesized and characterized by (1) H-NMR, mass spectrometry, infrared spectra and elemental analysis. Their europium complexes were prepared and characterized by elemental analysis, EDTA titrimetric analysis, IR and UV spectra as well as molar conductivity measurements. The luminescence properties of these complexes were investigated and results show that 2-(benzylcarbamoyl)phenyl derivatives possess high selectivity and good coordination with the europium ion. Complex Eu-2-(benzylcarbamoyl)phenyl-2-phenylacetate showed green luminescence that was emitted by the ligand of 2-(benzylcarbamoyl)phenyl-2-phenylacetate, while other complexes showed the characteristic red luminescence of europium ion and also possessed high luminescence intensity. Copyright © 2012 John Wiley & Sons, Ltd.

  19. Induction of Circularly Polarized Luminescence from Europium by Amino Acid Based Ionic Liquids.

    Science.gov (United States)

    Zercher, Ben; Hopkins, Todd A

    2016-11-07

    Materials that emit circularly polarized light have application in several important industries. Because they show large optical activity and emit sharp visible light transitions, europium complexes are often exploited in applications that require circularly polarized luminescence (CPL). Chiral and coordinating ionic liquids based on prolinate, valinate, and aspartate anions are used to induce CPL from a simple achiral europium triflate salt. The sign of the induced CPL is dependent on the handedness (l vs d) of the amino acid anion. Comparison of the CPL spectra in ionic liquid with proline and valine vs aspartate shows that the number of carboxylate groups in the amino acid anion influences the europium coordination environment. DFT calculations predict a chiral eight-coordinate Eu(Pro)4- structure in the prolinate ionic liquid and a chiral seven- or eight-coordinate Eu(Asp)33- structure in the aspartate ionic liquid.

  20. Comparative analysis of conjugated alkynyl chromophore-triazacyclononane ligands for sensitized emission of europium and terbium.

    Science.gov (United States)

    Soulié, Marine; Latzko, Frédéric; Bourrier, Emmanuel; Placide, Virginie; Butler, Stephen J; Pal, Robert; Walton, James W; Baldeck, Patrice L; Le Guennic, Boris; Andraud, Chantal; Zwier, Jurriaan M; Lamarque, Laurent; Parker, David; Maury, Olivier

    2014-07-07

    A series of europium and terbium complexes based on a functionalized triazacyclononane carboxylate or phosphinate macrocyclic ligand is described. The influence of the anionic group, that is, carboxylate, methylphosphinate, or phenylphosphinate, on the photophysical properties was studied and rationalized on the basis of DFT calculated structures. The nature, number, and position of electron-donating or electron-withdrawing aryl substituents were varied systematically within the same phenylethynyl scaffold in order to optimize the brightness of the corresponding europium complexes and investigate their two-photon absorption properties. Finally, the europium complexes were examined in cell-imaging applications, and selected terbium complexes were studied as potential oxygen sensors. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Magnetic and structural properties of yellow europium oxide compound and Eu(OH){sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Dongwook, E-mail: dongwookleedl324@gmail.com [Cavendish Laboratory, University of Cambridge, J. J Thomson Av., Cambridge CB3 0HE (United Kingdom); Seo, Jiwon, E-mail: jiwonseo@yonsei.ac.kr [Department of Physics and IPAP, Yonsei University, Seoul 120-749 (Korea, Republic of); Valladares, Luis de los Santos [Cavendish Laboratory, University of Cambridge, J. J Thomson Av., Cambridge CB3 0HE (United Kingdom); Avalos Quispe, O. [Laboratorio de Cerámicos y Nanomateriales, Facultad de Ciencias Físicas, Universidad Nacional Mayor de San Marcos, Ap. Postal 14-0149, Lima, Perú (Peru); Barnes, Crispin H.W. [Cavendish Laboratory, University of Cambridge, J. J Thomson Av., Cambridge CB3 0HE (United Kingdom)

    2015-08-15

    A new material based on a yellow europium oxide compound was prepared from europium oxide in a high vacuum environment. The structural and magnetic properties of the material were investigated. Owing to the absence of a crystal structure, the material exhibited a disordered magnetic behavior. In a reaction with deionized (DI) water without applied heat, the compound assumed a white color as soon as the DI water reached the powder, and the structure became polycrystalline Eu(OH){sub 3}. The magnetic properties, such as the thermal hysteresis, disappeared after the reaction with DI water, and the magnetic susceptibility of the yellow oxide compound weakened. The magnetic properties of Eu(OH){sub 3} were also examined. Although Eu{sup 3+} is present in Eu(OH){sub 3}, a high magnetic moment due to the crystal field effect was observed. - Graphical abstract: (top left) Optical image of the yellow europium oxide compound. (top right) Optical image of the product of DI water and yellow europium oxide. (bottom) Magnetization curves as a function of temperature measured in various magnetic field. - Highlights: • We prepared a new material based on a yellow europium oxide compound from europium oxide. • We characterized the magnetic properties of the material which exhibits a disordered magnetic behavior such as thermal hysteresis. • The compound turned white (Eu(OH){sub 3}) as soon as the DI water reached the powder. • The thermal hysteresis disappeared after the reaction with DI water and the magnetic susceptibility of the yellow oxide compound weakened.

  2. Europium stearate additives delay oxidation of UHMWPE for orthopaedic applications: a pilot study.

    Science.gov (United States)

    Gallardo, Luis A; Carpentieri, Ilenia; Laurent, Michel P; Costa, Luigi; Wimmer, Markus A

    2011-08-01

    Ultrahigh-molecular-weight polyethylene (UHMWPE) is used as an articulating surface in prosthetic devices. Its failure under various mechanisms after oxidation is of utmost concern. Free radicals formed during the sterilization process using high-energy irradiation result in oxidation. Europium, an element of the lanthanide family, has a unique electron configuration with an unusual lack of preference for directional bonding and notable bonding to oxygen. Because of this, it currently is used in studies for stabilization of polymers such as polyvinyl chloride. We asked whether europium stearate could enhance the oxidation resistance after irradiation in nitrogen of UHMWPE. Conventional nonirradiated and gamma-irradiated in nitrogen UHMWPE were compared with polyethylene doped with 375 ppm and 3750 ppm europium(III) stearate under the same treatment conditions. Chemical characterization was performed by Fourier transform infrared (FTIR) microspectroscopy using 200-μm thin films. The oxidation of doped samples with time was compared with that of conventional samples using accelerated oven aging. The types of oxidation products were identified by FTIR and quantified per material and treatment condition as indications of the oxidation level and mechanism. The generation rate of hydroperoxides and ketones was decelerated proportionally with concentration of europium stearates. The oxidative mechanism appeared similar to that of conventional polyethylene with the same types of measurable end products as ketones and hydroperoxides. Yet, the rate of generation of the latter appeared to be slowed down by the action of europium stearate. Europium stearate mixed in UHMWPE decelerated the oxidation reactions triggered by gamma irradiation in nitrogen, seemingly without major alteration of the oxidation mechanism.

  3. Temperature dependent luminescence of a europium complex incorporated in poly(methyl methacrylate).

    Science.gov (United States)

    Liang, Hao; Xie, Fang; Ren, Xiaojun; Chen, Yifa; Chen, Biao; Guo, Fuquan

    2013-12-01

    An europium β-diketonate complex with a dipyrazolyltriazine derivative ligand, Eu(TTA)3DPBT, has been incorporated into poly(methyl methacryate) (PMMA). The influence of temperature on its luminescence properties has been investigated. The fluorescence emission spectra and luminescence lifetimes showed temperature sensitivity. The analysis of the relative intensity ratio (R) of (5)D0 → (7)F2 to (5)D0 → (7)F1 transition and Judd-Ofelt experimental intensity parameters Ω2 indicated that the local structure and asymmetry in the vicinity of europium ions show no obvious change when the temperature is increased. Copyright © 2013 Elsevier B.V. All rights reserved.

  4. Carbides composite surface layers produced by (PTA)

    Energy Technology Data Exchange (ETDEWEB)

    Tajoure, Meloud, E-mail: Tajoore2000@yahoo.com [MechanicalEng.,HIHM,Gharian (Libya); Tajouri, Ali, E-mail: Tajouri-am@yahoo.com, E-mail: dr.mokhtarphd@yahoo.com; Abuzriba, Mokhtar, E-mail: Tajouri-am@yahoo.com, E-mail: dr.mokhtarphd@yahoo.com [Materials and Metallurgical Eng., UOT, Tripoli (Libya); Akreem, Mosbah, E-mail: makreem@yahoo.com [Industrial Research Centre,Tripoli (Libya)

    2013-12-16

    The plasma transferred arc technique was applied to deposit a composite layer of nickel base with tungsten carbide in powder form on to surface of low alloy steel 18G2A type according to polish standard. Results showed that, plasma transferred arc hard facing process was successfully conducted by using Deloro alloy 22 plus tungsten carbide powders. Maximum hardness of 1489 HV and minimum dilution of 8.4 % were achieved by using an arc current of 60 A. However, when the current was further increased to 120 A and the dilution increases with current increase while the hardness decreases. Microstructure of the nickel base deposit with tungsten carbide features uniform distribution of reinforcement particles with regular grain shape half - dissolved in the matrix.

  5. Silicon Carbide Etching Using Chlorine Trifluoride Gas

    Science.gov (United States)

    Habuka, Hitoshi; Oda, Satoko; Fukai, Yasushi; Fukae, Katsuya; Takeuchi, Takashi; Aihara, Masahiko

    2005-03-01

    The etch rate, chemical reactions and etched surface of β-silicon carbide are studied in detail using chlorine trifluoride gas. The etch rate is greater than 10 μm min-1 at 723 K with a flow rate of 0.1 \\ell min-1 at atmospheric pressure in a horizontal reactor. The maximum etch rate at a substrate temperature of 773 K is 40 μm min-1 with a flow rate of 0.25 \\ell min-1. The step-like pattern that initially exists on the β-silicon carbide surface tends to be smoothed; the root-mean-square surface roughness decreases from its initial value of 5 μm to 1 μm within 15 min; this minimum value is maintained for more than 15 min. Therefore, chlorine trifluoride gas is considered to have a large etch rate for β-silicon carbide associated with making a rough surface smooth.

  6. Silicon carbide microsystems for harsh environments

    CERN Document Server

    Wijesundara, Muthu B J

    2011-01-01

    Silicon Carbide Microsystems for Harsh Environments reviews state-of-the-art Silicon Carbide (SiC) technologies that, when combined, create microsystems capable of surviving in harsh environments, technological readiness of the system components, key issues when integrating these components into systems, and other hurdles in harsh environment operation. The authors use the SiC technology platform suite the model platform for developing harsh environment microsystems and then detail the current status of the specific individual technologies (electronics, MEMS, packaging). Additionally, methods

  7. Study of the europium behavior in aqueous media; Estudio sobre el comportamiento del europio en medios acuosos

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez R, E.; Jimenez R, M.; Solache R, M.; Martinez M, V. [Instituto Nacional de Investigaciones Nucleares, Departamento de Quimica, A.P. 18-1027, C.P. 11801 Mexico D.F. (Mexico)

    2000-07-01

    Europium as waste can produce a pollution problem in water that is in contact with it, what would has a heavy environmental impacts, because of the possibilities of diffusion of these wastes from their place of confinement or storage until the geo and biosphere. The solution of such problem requires of a lot of knowledge over the behavior of several chemical elements such as europium in aqueous solutions. In this work it was used a low ion force (0.02 M). The data set will allow extrapolate the hydrolytic behavior of europium in too much minors ion force media, such as the ground waters, including in ion force zero.

  8. Thermodynamic and structural description of europium complexation in 1-octanol - H{sub 2}O solutions

    Energy Technology Data Exchange (ETDEWEB)

    Vu, T.H.; Charbonnel, M.C.; Boubals, N.; Couston, L. [CEA Marcoule, DEN/DRCP/SCPS/LCAM, BP 17171, 30207 Bagnols-sur-Ceze (France); Arnaud, F. [Laboratoire de Chimie Physique, IPHC, 25 rue Becquerel, 67087 Strasbourg (France)

    2008-07-01

    Polydentate N-bearing ligands such as bis-triazinyl-pyridines (BTPs) are interesting extractants for actinide(III)/lanthanide(III) separation. A description of europium complexation in 1-octanol solutions was undertaken to enhance the knowledge of the extraction mechanisms. The first solvation shell for europium(III) nitrate, chloride, and perchlorate with different amounts of water was determined by Time-Resolved Laser-Induced Fluorescence (TRLIF) spectroscopy. Europium nitrate complexation by iPr-BTP was then studied by TRLIF and micro-calorimetry; similar stability constants related to the formation of Eu(BTP){sub 2}{sup 3+} and Eu(BTP){sub 3}{sup 3+} were obtained by both techniques (log({beta}{sub 2}) = 9.0 {+-} 0.3 and log({beta}{sub 3}) = 13.8 {+-} 0.2). The presence of water in the octanol diluent has an influence on solvation of europium and also on the [Eu(BTP){sub 2}{sup 3+}] / [Eu(BTP){sub 3}{sup 3+}] ratio. (authors)

  9. A novel biocompatible europium ligand for sensitive time-gated immunodetection.

    Science.gov (United States)

    Sayyadi, Nima; Connally, Russell E; Try, Andrew

    2016-01-21

    We describe the synthesis of a novel hydrophilic derivative of a tetradentate β-diketone europium ligand that was used to prepare an immunoconjugate probe against Giardia lamblia cysts. We used a Gated Autosynchronous Luminescence Detector (GALD) to obtain high quality delayed luminescence images of cells 30-fold faster than ever previously reported.

  10. Europium-doped barium halide scintillators for x-ray and ?-ray detections

    NARCIS (Netherlands)

    Selling, J.; Birowosuto, M.D.; Dorenbos, P.; Schweizer, S.

    2007-01-01

    Single crystals of undoped or europium-doped barium chloride, bromide, and iodide were investigated under x-ray and ?-ray excitations. The Eu2+-related x-ray excited luminescence found in the Eu-doped barium halides occurs at 402, 404, and 425?nm for the chloride, bromide, and iodide, respectively.

  11. A europium luminescence assay of lactate and citrate in biological fluids†

    Science.gov (United States)

    Pal, Robert; Costello, Leslie C.

    2013-01-01

    Ratiometric methods of analysis have been developed for the selective determination of lactate or citrate in microlitre samples of human serum, urine or prostate fluids following comparison of anion binding affinities for a family of nine luminescent europium(III) complexes. PMID:19343236

  12. Molecular interactions of Leucoagaricus naucinus with uranium(VI) and europium(III)

    Energy Technology Data Exchange (ETDEWEB)

    Wollenberg, Anne; Raff, Johannes [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Biogeochemistry; Guenther, A. [Helmholtz Institute Freiberg for Resource Technology, Freiberg (Germany)

    2017-06-01

    With regard to a molecular understanding of the interaction of fungal mycelium with radionuclides and its possible application for precautionary radiation protection and bio-remediation, the binding mechanism of the radionuclide uranium and the metal europium, as surrogate for trivalent actinides, where investigated with different starting conditions by the living fungal cells of Leucoagaricus naucinus.

  13. Europium doped In(Zn)P/ZnS colloidal quantum dots

    NARCIS (Netherlands)

    Thuy, Ung Thi Dieu; Maurice, Axel; Liem, Nguyen Quang; Reiss, Peter

    2013-01-01

    Chemically synthesised In(Zn)P alloy nanocrystals are doped with Eu(3+) ions using europium oleate as a molecular precursor and are subsequently covered with a ZnS shell. The presence of zinc in the synthesis of the InP core nanocrystals leads to the formation of an In(Zn)P alloy structure, making

  14. NO fluorescence sensing by europium tetracyclines complexes in the presence of H2O2.

    Science.gov (United States)

    Simões, Eliana F C; Leitão, João M M; Esteves da Silva, Joaquim C G

    2013-07-01

    The effect on the fluorescence of the europium:tetracycline (Eu:Tc), europium:oxytetracycline (Eu:OxyTc) and europium:chlortetracycline (Eu:ClTc) complexes in approximately 2:1 ratio of nitric oxide (NO), peroxynitrite (ONOO(-)), hydrogen peroxide (H2O2) and superoxide (O2 (·-)) was assessed at three ROS/RNS concentrations levels, 30 °C and pH 6.00, 7.00 and 8.00. Except for the NO, an enhancement of fluorescence intensity was observed at pH 7.00 for all the europium tetracyclines complexes-the high enhancement was observed for H2O2. The quenching of the fluorescence of the Tc complexes, without and with the presence of other ROS/RNS species, provoked by NO constituted the bases for an analytical strategy for NO detection. The quantification capability was evaluated in a NO donor and in a standard solution. Good quantification results were obtained with the Eu:Tc (3:1) and Eu:OxyTc (4:1) complexes in the presence of H2O2 200 μM with a detection limit of about 3 μM (Eu:OxyTc).

  15. Long-term tagging of elvers, Anguilla anguilla, with radioactive europium

    DEFF Research Database (Denmark)

    Hansen, Heinz Johs. Max; Fattah, A. T. A.

    1986-01-01

    -life of added europium of 1.6 .+-. 0.5 years. Thirteen hundred 155Eu-labelled elvers (50 Bq per eel), each weighing on average 0.21 g, were set out near Oskarshamn on the east coast of Sweden in June 1982. Three of these were caught nearby in May 1985 and one was caught in August 1985. They weighed...

  16. ULTRAVIOLET TRANSITIONS IN EUROPIUM STUDIED WITH A FREQUENCY-DOUBLED CW RING DYE-LASER

    NARCIS (Netherlands)

    Eliel, E.R.; Hogervorst, W.; van Leeuwen, K.A.H.; Post, B.H.

    1981-01-01

    High resolution laser spectroscopy has been applied to the study of three ultraviolet transitions in Europium at λ = 294.8, 295.1 and 295.8 nm. The tunable narrowband UV has been generated by intracavity frequency doubling in a cw ring dye laser using a temperate tuned, Brewster angled ADA crystal.

  17. Optical and Morphological Characterization of Sonochemically Assisted Europium Doped Copper (I) Oxide Nanostructures

    Science.gov (United States)

    Cosico, J. A. M.; Ruales, P. K.; Marquez, M. C.

    2017-06-01

    In the age where application of nanotechnology in our society has proven to be eminent, different routes of synthesizing nanoparticles have emerged. In this study nanoparticles of cuprous oxide (Cu2O) doped with different amounts of europium was prepared by using solution precursor route approach with the aid of ultrasonic sound. Copper sulphate and europium (III) nitrate pentahydrate was used as source for copper ions and europium ions respectively. X-ray diffraction (XRD) and Fourier Transform Infrared spectroscopy (FTIR) were used to elucidate the cubic crystal structure and organic impurities present on Cu2Onanoparticles. UV-Vis spectroscopy was used to determine the absorption spectrum of the nanoparticles in the wavelength range of 400nm to 700nm. The bandgap of the undoped and doped Cu2O were found to fall between 2.1eV - 2.3eV. Scanning Electron Microscopy (SEM) coupled with energy dispersive x-ray was used to observe the dendritic and rodlike morphology and the presence of europium in the synthesized Cu2O nanoparticles. The observed effect on the absorbance of Cu2O upon adding Eu and a facile way of synthesizing Cu2O nanoparticles could bring a positive impact on the production of functional devices for optoelectronic and energy applications.

  18. Sol–gel processing of carbidic glasses

    Indian Academy of Sciences (India)

    Unknown

    Abstract. Carbon incorporation into the silicate network results in the formation of rigid carbidic glasses with improved physical, mechanical and thermal properties. This generated great interest in the development of these heteroatom structured materials through different processing routes. In the present studies, sol–gel.

  19. Sol–gel processing of carbidic glasses

    Indian Academy of Sciences (India)

    Carbon incorporation into the silicate network results in the formation of rigid carbidic glasses with improved physical, mechanical and thermal properties. This generated great interest in the development of these heteroatom structured materials through different processing routes. In the present studies, sol–gel processing ...

  20. Producing Silicon Carbide/Silicon Nitride Fibers

    Science.gov (United States)

    1986-01-01

    Manufacturing process makes CxSiyNz fibers. Precursor fibers spun from extruding machine charged with polycarbosilazane resin. When pyrolyzed, resin converted to cross-linked mixture of silicon carbide and silicon nitride, still in fiber form. CxSiyNz fibers promising substitutes for carbon fibers in high-strength, low-weight composites where high electrical conductivity unwanted.

  1. Casimir forces from conductive silicon carbide surfaces

    NARCIS (Netherlands)

    Sedighi Ghozotkhar, Mehdi; Svetovoy, V. B.; Broer, W. H.; Palasantzas, G.

    2014-01-01

    Samples of conductive silicon carbide (SiC), which is a promising material due to its excellent properties for devices operating in severe environments, were characterized with the atomic force microscope for roughness, and the optical properties were measured with ellipsometry in a wide range of

  2. Silicon Carbide Power Devices and Integrated Circuits

    Science.gov (United States)

    Lauenstein, Jean-Marie; Casey, Megan; Samsel, Isaak; LaBel, Ken; Chen, Yuan; Ikpe, Stanley; Wilcox, Ted; Phan, Anthony; Kim, Hak; Topper, Alyson

    2017-01-01

    An overview of the NASA NEPP Program Silicon Carbide Power Device subtask is given, including the current task roadmap, partnerships, and future plans. Included are the Agency-wide efforts to promote development of single-event effect hardened SiC power devices for space applications.

  3. Visible light emission from porous silicon carbide

    DEFF Research Database (Denmark)

    Ou, Haiyan; Lu, Weifang

    2017-01-01

    Light-emitting silicon carbide is emerging as an environment-friendly wavelength converter in the application of light-emitting diode based white light source for two main reasons. Firstly, SiC has very good thermal conductivity and therefore a good substrate for GaN growth in addition to the small...

  4. Mechanical characteristics of microwave sintered silicon carbide

    Indian Academy of Sciences (India)

    In firing of products by conventionally sintered process, SiC grain gets oxidized producing SiO2 (∼ 32 wt%) and deteriorates the quality of the product substantially. Partially sintered silicon carbide by such a method is a useful material for a varieties of applications ranging from kiln furniture to membrane material.

  5. Ligand sphere conversions in terminal carbide complexes

    DEFF Research Database (Denmark)

    Morsing, Thorbjørn Juul; Reinholdt, Anders; Sauer, Stephan P. A.

    2016-01-01

    Metathesis is introduced as a preparative route to terminal carbide complexes. The chloride ligands of the terminal carbide complex [RuC(Cl)2(PCy3)2] (RuC) can be exchanged, paving the way for a systematic variation of the ligand sphere. A series of substituted complexes, including the first...... demonstrates that details of the coordination geometry affect the carbide chemical shift equally as much as variations in the nature of the auxiliary ligands. Furthermore, the kinetics of formation of the sqaure pyramidal dicyano complex, trans-[RuC(CN)2(PCy3)2], from RuC has been examined and the reaction...... found to be quite sluggish and of first order in both RuC and cyanide with a rate constant of k = 0.0104(6) M–1 s–1. Further reaction with cyanide leads to loss of the carbide ligand and formation of trans-[Ru(CN)4(PCy3)2]2–, which was isolated and structurally characterized as its PPh4+ salt....

  6. Pyrotechnic Smoke Compositions Containing Boron Carbide

    Science.gov (United States)

    2012-06-10

    approach the performance of the AN-M8 HC composition (Al/ZnO/C2Cl6). 15. SUBJECT TERMS smoke, pyrotechnic, boron carbide 16. SECURITY CLASSIFICATION ...reduction of phosphate. This hypothesis was confirmed in an unexpected and alarming way, when the strong fishy- garlic odor of phosphorus and phosphines

  7. Occurrence of photoluminescence and onion like structures decorating graphene oxide with europium using sodium dodecyl sulfate surfactant

    Science.gov (United States)

    Cedeño, V. J.; Rangel, R.; Cervantes, J. L.; Lara, J.; Alvarado, J. J.; Galván, D. H.

    2017-07-01

    Graphene oxide decoration with europium was carried out using SDS (sodium dodecyl sulfate) as the surfactant. The reaction was performed in a microwave oven and subsequently underwent thermal treatment under hydrogen flow. The results found in the present work demonstrate that through the use of SDS surfactant aggregates of hemi-cylindrical and onion-like structures could be obtained; which propitiate an enhanced synergistic photoluminescence located at the red wavelength. On the other hand, after thermal treatment the aggregates disappear providing a good dispersion of europium, however a decrease in the photoluminescence signal is observed. The graphene oxide decorated with europium was characterized by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), Fourier infrared transform spectroscopy (FTIR), RAMAN spectroscopy, x-ray photoelectron spectroscopy (XPS) and transmission electron microscopy (TEM) techniques, showing the characteristic features of graphene oxide and europium.

  8. Synthesis, characterization, and properties of reduced europium molybdates and tungstates

    Energy Technology Data Exchange (ETDEWEB)

    Abeysinghe, Dileka [Department of Chemistry and Biochemistry, University of South Carolina, Columbia, SC 29208 (United States); Gerke, Birgit [Institut für Anorganische und Analytische Chemie, Universität Münster , Corrensstrasse 30, Münster D-48149 (Germany); Morrison, Gregory; Hsieh, Chun H.; Smith, Mark D. [Department of Chemistry and Biochemistry, University of South Carolina, Columbia, SC 29208 (United States); Pöttgen, Rainer [Institut für Anorganische und Analytische Chemie, Universität Münster , Corrensstrasse 30, Münster D-48149 (Germany); Makris, Thomas M. [Department of Chemistry and Biochemistry, University of South Carolina, Columbia, SC 29208 (United States); Loye, Hans-Conrad zur, E-mail: zurloye@mailbox.sc.edu [Department of Chemistry and Biochemistry, University of South Carolina, Columbia, SC 29208 (United States)

    2015-09-15

    Single crystals of K{sub 0.094}Eu{sub 0.906}MoO{sub 4}, K{sub 0.097}Eu{sub 0.903}WO{sub 4}, EuWO{sub 4}, and EuMoO{sub 4} were grown from molten chloride fluxes contained in vacuum-sealed fused silica and structurally characterized via single crystal X-ray diffraction. The in situ reduction of Eu{sup 3+} to Eu{sup 2+} was carried out using Mo, W, and Zn as metal reducing agents. All four compounds crystallize in the tetragonal space group of I4{sub 1}/a and adopt the scheelite (CaWO{sub 4}) structure type. The magnetic susceptibility of the reported compounds shows paramagnetic behavior down to 2 K. {sup 151}Eu Mössbauer spectroscopy was used to analyze the relative Eu{sup 2+} and Eu{sup 3+} content of the samples. All the compounds were further characterized by EPR, and UV-vis spectroscopy. - Graphical abstract: TOC Caption Two new reduced europium containing quaternary oxides, K{sub 0.094}Eu{sub 0.906}MoO{sub 4} and K{sub 0.097}Eu{sub 0.903}WO{sub 4}, and two previously reported ternary reduced oxides, EuWO{sub 4} and EuMoO{sub 4}, were synthesized via an in situ reduction of Eu{sup 3+} to Eu{sup 2+} under flux method using Mo, W, and Zn as metal reducing agents. {sup 151}Eu Mössbauer spectroscopy was used to analyze the relative Eu{sup 2+} and Eu{sup 3+} content of the samples. - Highlights: • K{sub 0.094}Eu{sub 0.906}MoO{sub 4}, K{sub 0.097}Eu{sub 0.903}WO{sub 4}, EuWO{sub 4}, and EuMoO{sub 4} have been synthesized and characterized. • The in situ reduction of Eu{sup 3+} to Eu{sup 2+} was carried out using Mo, W, and Zn as metal reducing agents. • Magnetic susceptibility data were collected. • {sup 151}Eu Mössbauer spectroscopy was used to analyze Eu{sup 2+} and Eu{sup 3+} content.

  9. A highly sensitive and selective fluorescent sensor for detection of Al(3+) using a europium(III) quinolinecarboxylate.

    Science.gov (United States)

    Xu, Wentao; Zhou, Youfu; Huang, Decai; Su, Mingyi; Wang, Kun; Hong, Maochun

    2014-07-07

    Eu2PQC6 has been developed to detect Al(3+) by monitoring the quenching of the europium-based emission, with the lowest detection limit of ∼32 pM and the quantitative detection range to 150 μM. Eu2PQC6 is the first ever example that the europium(III) complex serves as an Al(3+) fluorescent sensor based on "competition-displacement" mode.

  10. Processing development of 4 tantalum carbide-hafnium carbide and related carbides and borides for extreme environments

    Science.gov (United States)

    Gaballa, Osama Gaballa Bahig

    Carbides, nitrides, and borides ceramics are of interest for many applications because of their high melting temperatures and good mechanical properties. Wear-resistant coatings are among the most important applications for these materials. Materials with high wear resistance and high melting temperatures have the potential to produce coatings that resist degradation when subjected to high temperatures and high contact stresses. Among the carbides, Al4SiC4 is a low density (3.03 g/cm3), high melting temperature (>2000°C) compound, characterized by superior oxidation resistance, and high compressive strength. These desirable properties motivated this investigation to (1) obtain high-density Al4SiC4 at lower sintering temperatures by hot pressing, and (2) to enhance its mechanical properties by adding WC and TiC to the Al4SiC4. Also among the carbides, tantalum carbide and hafnium carbide have outstanding hardness; high melting points (3880°C and 3890°C respectively); good resistance to chemical attack, thermal shock, and oxidation; and excellent electronic conductivity. Tantalum hafnium carbide (Ta4HfC 5) is a 4-to-1 ratio of TaC to HfC with an extremely high melting point of 4215 K (3942°C), which is the highest melting point of all currently known compounds. Due to the properties of these carbides, they are considered candidates for extremely high-temperature applications such as rocket nozzles and scramjet components, where the operating temperatures can exceed 3000°C. Sintering bulk components comprised of these carbides is difficult, since sintering typically occurs above 50% of the melting point. Thus, Ta4 HfC5 is difficult to sinter in conventional furnaces or hot presses; furnaces designed for very high temperatures are expensive to purchase and operate. Our research attempted to sinter Ta4HfC5 in a hot press at relatively low temperature by reducing powder particle size and optimizing the powder-handling atmosphere, milling conditions, sintering

  11. The effect of two additional Eu3+ lumophors in two novel trinuclear europium complexes on their photoluminescent properties.

    Science.gov (United States)

    Yang, Chaolong; Xu, Jing; Ma, Jianying; Zhu, Dongyu; Zhang, Yunfei; Liang, Liyan; Lu, Mangeng

    2013-02-01

    Two novel trinuclear europium complexes based on trisphen(1,3,5-tris{4-((1,10-phenanthroline-[5,6-d]imidazol-2yl)phenoxy)methyl}-2,4,6-trimethyl-benzene) as a second ligand were designed, synthesized, and characterized by FT-IR, (1)H NMR, UV-visible, photoluminescence (PL) spectroscopy, elemental analysis (EA) and ESI-MS. The geometries of these two trinuclear europium complexes were predicted using the Sparkle/PM3 model and suggested a chemical environment of very low symmetry around the lanthanide ions (C(1)), which is in agreement with the luminescent spectra. CV analysis demonstrated that the trinuclear complexes possessed excellent electro-injection abilities. The effects of two additional Eu(3+) lumophors in these trinuclear europium complexes on their photoluminescent properties were investigated in detail. The results indicated that these trinuclear europium complexes exhibited highly luminescent quantum efficiencies and experimental intensity parameters in the solid state. Especially, due to the contribution of the two additional Eu(3+) lumophors in the trinuclear europium complexes, the quantum efficiency of the trinuclear complex Eu(3)(TTA)(9)trisphen was higher (ca. 34%) than the mononuclear europium complex Eu(TTA)(3)imidazophen.

  12. Tribological Characteristics of Tungsten Carbide Reinforced Arc Sprayed Coatings using Different Carbide Grain Size Fractions

    Directory of Open Access Journals (Sweden)

    W. Tillmann

    2017-06-01

    Full Text Available Tungsten carbide reinforced coatings play an important role in the field of surface engineering to protect stressed surfaces against wear. For thermally sprayed coatings, it is already shown that the tribological properties get mainly determined by the carbide grain size fraction. Within the scope of this study, the tribological characteristics of iron based WC-W2C reinforced arc sprayed coatings deposited using cored wires consisting of different carbide grain size fractions were examined. Microstructural characteristics of the produced coatings were scrutinized using electron microscopy and x-ray diffraction analyses. Ball-on-disk test as well as Taber Abraser and dry sand rubber wheel test were employed to analyze both the dry sliding and the abrasive wear behavior. It was shown that a reduced carbide grain size fraction as filling leads to an enhanced wear resistance against sliding. In terms of the Taber Abraser test, it is also demonstrated that a fine carbide grain size fraction results in an improved wear resistant against abrasion. As opposed to that, a poorer wear resistance was found within the dry sand rubber wheel tests. The findings show that the operating mechanisms for both abrasion tests affect the stressed surface in a different way, leading either to microcutting or microploughing.

  13. Carbide and boride laser modification of steels

    Science.gov (United States)

    Major, Boguslaw; Ebner, Reinhold

    1997-10-01

    Microstructure modification by laser remelting or laser alloying was studied on carbon Ck45 and high speed steels. Laser remelting of Ck45 by overlapping laser tracks led to a great refinement of martensitic structure, especially in the heat affected zone of subsequent laser track. High speed steel (HSS) M2 after laser remelting showed, beside the tetragonal martensite, the diffraction lines of cubic carbides of the M6C and M12C types. Laser alloying of M2 HSS using vanadium carbide (VC) additions caused increasing of eutectic in the interdendritic space, which was accompanied with reduction of the M6C and rising of the MC. M2 HSS laser alloyed with molybdenum carbide (Mo2C) showed formation of the M6C for the hipereutectic compositions while at the highest concentrations of molybdenum, primary dendrites of the M2C and stabilized ferrite were stated. High additions of borides: CrB or VB2; developed formation of the primary borides of blocky type containing a high amount of W, Cr or W, V, respectively. Laser alloying of Ck45 by means of: CrB, VB2 and B4C showed: in the case of CrB an eutectic (alpha) '/M3(C,B)/M2B as well as primary precipitates of the M2B phase for hipereutectic compositions; by adding VB2, the M3B2 and M2B phases were identified experimentally for hipereutectic concentrations; for alloying using B4C, the cellular dendritic structure together with primary borides of the (tau) -M23(C,B)6 phase were stated for hipereutectic compositions. The phase diagrams of M2 HSS + (VC or Mo2C) as well as Ck45 + B4C systems were calculated to predict changes of the constitutions due to laser alloying. Comparison of the solidification structures established experimentally with the calculated phase diagrams revealed a good correlation for the carbides, especially.

  14. Manufacturing technology for contacts to silicon carbide

    Directory of Open Access Journals (Sweden)

    Kudryk Ya.Ya.

    2013-02-01

    Full Text Available The authors classified the results of investigations of resistivity of ohmic contacts to silicon carbide made without any semiconductor surface modification. A set of contacts with better parameters were analysed. From the results of this analysis, some recommendations were made concerning optimal contact-forming layers for p- and n-SiC types of 4H, 6H, 3C, 15R, 21R polytypes.

  15. Low blow Charpy impact of silicon carbides

    Science.gov (United States)

    Abe, H.; Chandan, H. C.; Bradt, R. C.

    1978-01-01

    The room-temperature impact resistance of several commercial silicon carbides was examined using an instrumented pendulum-type machine and Charpy-type specimens. Energy balance compliance methods and fracture toughness approaches, both applicable to other ceramics, were used for analysis. The results illustrate the importance of separating the machine and the specimen energy contributions and confirm the equivalence of KIc and KId. The material's impact energy was simply the specimen's stored elastic strain energy at fracture.

  16. Stereology of carbide phase in modified hypereutectic chromium cast iron

    Directory of Open Access Journals (Sweden)

    J. Suchoń

    2010-04-01

    Full Text Available In paper are presented results of studies of carbide phase stereology modified hypereutectic wear resistance chromium cast iron which contains carbon about 3,5% and chromium about 25%. Three substances were applied to the modification: boron carbide (B4C, ferroniobium (FeNb and mixture of ferroniobium and rare-earth (RE. The measurements of geometrical features of carbides were conducted on microsection taken from castings wich were cooled with various velocities.

  17. Influence of biofilms on migration of uranium, americium and europium in the environment; Einfluss von Biofilmen auf das Migrationsverhalten von Uran, Americium und Europium in der Umwelt

    Energy Technology Data Exchange (ETDEWEB)

    Baumann, Nils; Zirnstein, Isabel; Arnold, Thuro

    2015-07-01

    The report on the influence of biofilms on migration of uranium, americium and europium in the environment deals with the contamination problems of uranium mines such as SDAG WISMUT in Saxonia and Thuringia. In mine waters microorganisms form a complex microbiological biocoenosis in spite of low pH values and high heavy metal concentrations including high uranium concentrations. The analyses used microbiological methods like confocal laser scanning microscopy and molecular-biological techniques. The interactions of microorganism with fluorescent radioactive heavy metal ions were performed with TRLFS (time resolved laser-induced fluorescence spectroscopy).

  18. Silicon Carbide Corrugated Mirrors for Space Telescopes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Trex Enterprises Corporation (Trex) proposes technology development to manufacture monolithic, lightweight silicon carbide corrugated mirrors (SCCM) suitable for...

  19. Carbides in Nodular Cast Iron with Cr and Mo

    Directory of Open Access Journals (Sweden)

    S. Pietrowski

    2007-07-01

    Full Text Available In these paper results of elements microsegregation in carbidic nodular cast iron have been presented. A cooling rate in the centre of the cross-section and on the surface of casting and change of moulding sand temperature during casting crystallization and its self-cooling have been investigated. TDA curves have been registered. The linear distribution of elements concentration in an eutectic grain, primary and secondary carbides have been made. It was found, that there are two kinds of carbides: Cr and Mo enriched. A probable composition of primary and secondary carbides have been presented.

  20. Characterization of silicon-silicon carbide ceramic derived from carbon-carbon silicon carbide composites

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, Vijay K. [Indian Institute of Technology, Varanasi (India). Dept. of Mechanical Engineering; Krenkel, Walter [Univ. of Bayreuth (Germany). Dept. of Ceramic Materials Engineering

    2013-04-15

    The main objective of the present work is to process porous silicon - silicon carbide (Si - SiC) ceramic by the oxidation of carboncarbon silicon carbide (C/C - SiC) composites. Phase studies are performed on the oxidized porous composite to examine the changes due to the high temperature oxidation. Further, various characterization techniques are performed on Si- SiC ceramics in order to study the material's microstructure. The effects of various parameters such as fiber alignment (twill weave and short/chopped fiber) and phenolic resin type (resol and novolak) are characterized.

  1. Incorporation of europium III complex into nanoparticles and films obtained by the Sol-Gel methodology

    Directory of Open Access Journals (Sweden)

    Faley Jean de Sousa

    2010-03-01

    Full Text Available The sol-gel process is very effective for the preparation of new materials with potential applications in optics, sensors, catalyst supports, coatings, and specialty inorganic polymers that can be used as hosts for the accommodation of organic molecules. The low temperature employed in the process is the main advantage of this methodology. In this work, the europium (III complex with 1,10-phenantroline was prepared, and this luminescent complex was incorporated into silica nanoparticles and films by the sol-gel process. The nanoparticles were obtained by the modified Stöber methodology. The films were obtained by the dip-coating technique, at different deposition rates and numbers of layers. The nanoparticles and films were characterized by photoluminescence, thermal analysis, and Raman and infrared spectroscopies. Characterization revealed that the europium (III complex was not affected upon incorporation into the nanoparticles and films, opening a new field for the application of these materials.

  2. A Simple and Sensitive Method to Quantify Biodegradable Nanoparticle Biodistribution using Europium Chelates.

    Science.gov (United States)

    Crawford, Lindsey; Higgins, Jaclyn; Putnam, David

    2015-09-08

    The biodistribution of biodegradable nanoparticles can be difficult to quantify. We report a method using time resolved fluorescence (TRF) from a lanthanide chelate to minimize background autofluorescence and maximize the signal to noise ratio to detect biodegradable nanoparticle distribution in mice. Specifically, antenna chelates containing europium were entrapped within nanoparticles composed of polylactic acid-polyethylene glycol diblock copolymers. Tissue accumulation of nanoparticles following intravenous injection was quantified in mice. The TRF of the nanoparticles was found to diminish as a second order function in the presence of serum and tissue compositions interfered with the europium signal. Both phenomena were corrected by linearization of the signal function and calculation of tissue-specific interference, respectively. Overall, the method is simple and robust with a detection limit five times greater than standard fluorescent probes.

  3. A Comprehensive Strategy to Boost the Quantum Yield of Luminescence of Europium Complexes

    Science.gov (United States)

    Lima, Nathalia B. D.; Gonçalves, Simone M. C.; Júnior, Severino A.; Simas, Alfredo M.

    2013-01-01

    Lanthanide luminescence has many important applications in anion sensing, protein recognition, nanosized phosphorescent devices, optoelectronic devices, immunoassays, etc. Luminescent europium complexes, in particular, act as light conversion molecular devices by absorbing ultraviolet (UV) light and by emitting light in the red visible spectral region. The quantum yield of luminescence is defined as the ratio of the number of photons emitted over the number of UV photons absorbed. The higher the quantum yield of luminescence, the higher the sensitivity of the application. Here we advance a conjecture that allows the design of europium complexes with higher values of quantum yields by simply increasing the diversity of good ligands coordinated to the lanthanide ion. Indeed, for the studied cases, the percent boost obtained on the quantum yield proved to be strong: of up to 81%, accompanied by faster radiative rate constants, since the emission becomes less forbidden. PMID:23928866

  4. Assembly of europium organic framework–gold nanoparticle composite thin films on silicon substrate

    Energy Technology Data Exchange (ETDEWEB)

    Deep, Akash, E-mail: dr.akashdeep@gmail.com [Central Scientific Instruments Organisation (CSIR-CSIO), Sector 30 C, Chandigarh 160030 (India); Academy of Scientific and Innovative Research, CSIR-CSIO, Sector 30 C, Chandigarh 160030 (India); Kaur, Rajnish [Central Scientific Instruments Organisation (CSIR-CSIO), Sector 30 C, Chandigarh 160030 (India); Academy of Scientific and Innovative Research, CSIR-CSIO, Sector 30 C, Chandigarh 160030 (India); Kumar, Parveen [Central Scientific Instruments Organisation (CSIR-CSIO), Sector 30 C, Chandigarh 160030 (India); Kumar, Pawan; Paul, A.K. [Central Scientific Instruments Organisation (CSIR-CSIO), Sector 30 C, Chandigarh 160030 (India); Academy of Scientific and Innovative Research, CSIR-CSIO, Sector 30 C, Chandigarh 160030 (India)

    2014-08-28

    Metal organic frameworks are a sub-class of coordination polymers and rapidly generating huge research interests in several technological areas. One of the emerging areas of their potential applications is the photovoltaics. The present study proposes the assembly of europium organic framework–gold nanoparticle nanocomposite thin film on silicon substrate. Microscopic, X-ray diffraction, surface area measurement and thermal studies have indicated the formation of the desired thin film. Spectral studies have been used to highlight their solid state optical property. Current–voltage studies have established semiconducting property of the above thin films. - Highlights: • Thin film of europium organic framework/gold nanoparticles is prepared on silicon. • Fairly homogeneous films with a roughness factor of 5–10 nm are obtained. • Above thin films offer solid-state photoluminescence and semiconducting properties.

  5. Synthesis and optical features of an europium organic-inorganic silicate hybrid

    Energy Technology Data Exchange (ETDEWEB)

    Franville, A.C.; Zambon, D.; Mahiou, R.; Chou, S.; Cousseins, J.C. [Universite Blaise Pascal, Aubiere (France). Lab. des Materiaux Inorganiques; Troin, Y. [Laboratoire de Chimie des Heterocycles et des Glucides, EA 987, Universite Blaise-Pascal and ENSCCF, F-63177 Aubiere Cedex (France)

    1998-07-24

    A europium organic-inorganic silicate hybrid was synthesized by grafting a coordinative group (dipicolinic acid) to a silicate network precursor (3-aminopropyltriethoxysilane) via a covalent bonding. Sol-gel process and complexation were performed using different experimental conditions. The hybrid materials, in particular the Eu{sup 3+} coordination mode, were characterized by infrared and luminescence spectroscopies. Morphology of the materials and TG analysis showed that grafted silica enhanced thermal and mechanical resistances of the organic part. (orig.) 7 refs.

  6. Development of a microchip Europium nanoparticle immunoassay for sensitive point-of-care HIV detection.

    Science.gov (United States)

    Liu, Jikun; Du, Bingchen; Zhang, Panhe; Haleyurgirisetty, Mohan; Zhao, Jiangqin; Ragupathy, Viswanath; Lee, Sherwin; DeVoe, Don L; Hewlett, Indira K

    2014-11-15

    Rapid, sensitive and specific diagnostic assays play an indispensable role in determination of HIV infection stages and evaluation of efficacy of antiretroviral therapy. Recently, our laboratory developed a sensitive Europium nanoparticle-based microtiter-plate immunoassay capable of detecting target analytes at subpicogram per milliliter levels without the use of catalytic enzymes and signal amplification processes. Encouraged by its sensitivity and simplicity, we continued to miniaturize this assay to a microchip platform for the purpose of converting the benchtop assay technique to a point-of-care test. It was found that detection capability of the microchip platform could be readily improved using Europium nanoparticle probes. We were able to routinely detect 5 pg/mL (4.6 attomoles) of HIV-1 p24 antigen at a signal-to-blank ratio of 1.5, a sensitivity level reasonably close to that of microtiter-plate Europium nanoparticle assay. Meanwhile, use of the microchip platform effectively reduced sample/reagent consumption 4.5 fold and shortened total assay time 2 fold in comparison with microtiter plate assays. Complex matrix substance in plasma negatively affected the microchip assays and the effects could be minimized by diluting the samples before loading. With further improvements in sensitivity, reproducibility, usability, assay process simplification, and incorporation of portable time-resolved fluorescence reader, Europium nanoparticle immunoassay technology could be adapted to meet the challenges of point-of-care diagnosis of HIV or other health-threatening pathogens at bedside or in resource-limited settings. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Green Luminescence of Divalent Europium in the Hydride Chloride EuHCl

    NARCIS (Netherlands)

    Kunkel, Nathalie; Rudolph, Daniel; Meijerink, A; Rommel, Stefan; Weihrich, Richard; Kohlmann, Holger; Schleid, Thomas

    Luminescence properties of divalent europium in the mixed-anion hydride chloride EuHCl were studied for the first time. Olive-green single crystals of EuHCl (PbFCl-type structure: tetragonal, P4/nmm, a = 406.58(3) pm, c = 693.12(5) pm, c/a = 1.705, Z = 2) resulted from the reaction of elemental

  8. Ferromagnetic semiconductor-metal transition in heterostructures of electron doped europium monoxide

    Energy Technology Data Exchange (ETDEWEB)

    Stollenwerk, Tobias

    2013-09-15

    In the present work, we develop and solve a self-consistent theory for the description of the simultaneous ferromagnetic semiconductor-metal transition in electron doped Europium monoxide. We investigate two different types of electron doping, Gadolinium impurities and Oxygen vacancies. Besides the conduction band occupation, we can identify low lying spin fluctuations on magnetic impurities as the driving force behind the doping induced enhancement of the Curie temperature. Moreover, we predict the signatures of these magnetic impurities in the spectra of scanning tunneling microscope experiments. By extending the theory to allow for inhomogeneities in one spatial direction, we are able to investigate thin films and heterostructures of Gadolinium doped Europium monoxide. Here, we are able to reproduce the experimentally observed decrease of the Curie temperature with the film thickness. This behavior is attributed to missing coupling partners of the localized 4f moments as well as to an electron depletion at the surface which leads to a reduction of the number of itinerant electrons. By investigating the influence of a metallic substrate onto the phase transition in Gadolinium doped Europium monoxide, we find that the Curie temperature can be increased up to 20%. However, as we show, the underlying mechanism of metal-interface induced charge carrier accumulation is inextricably connected to a suppression of the semiconductor-metal transition.

  9. Redox electrochemistry of europium fluoride complexes in an equimolar NaCl-KCl melt

    Energy Technology Data Exchange (ETDEWEB)

    Kuznetsov, S.A., E-mail: kuznet@chemy.kolasc.net.ru [Institute of Chemistry, Kola Science Centre RAS, 26 Akademgorodok., 184209 Apatity, Murmansk region (Russian Federation); Gaune-Escard, M. [Ecole Polytechnique, Mecanique Energetique, Technopole de Chateau Gombert, 5 rue Enrico Fermi, 13453 Marseille Cedex 13 (France)

    2011-07-15

    The electrochemical behavior of europium fluoride complexes was studied by different electrochemical methods at a glassy carbon electrode in the temperature range 973-1100 K in the NaCl-KCl melt. The diffusion coefficients of Eu(III) and Eu(II) were determined by linear sweep voltammetry. The standard rate constants of charge transfer for the Eu(III)/Eu(II) redox couple were found on the base cyclic voltammetry, impedance spectroscopy and chronoamperometry data. The formal standard redox potentials E{sub Eu(III)/Eu(II)}{sup *} were obtained by linear sweep and cyclic voltammetry. The electrochemical behavior of europium fluoride and europium chloride complexes in NaCl-KCl melt was compared and discussed in connection with the strength and stability of these complexes. It was shown that the formation of stronger fluoride complexes reduced values of diffusion coefficients, standard rate constants for charge transfer of the Eu(III)/Eu(II) redox couple and shifted the formal standard redox potentials to the more electronegative values.

  10. Lateral flow immunoassay using europium chelate-loaded silica nanoparticles as labels.

    Science.gov (United States)

    Xia, Xiaohu; Xu, Ye; Zhao, Xilin; Li, Qingge

    2009-01-01

    Despite their ease of use, lateral flow immunoassays (LFIAs) often suffer from poor quantitative discrimination and low analytical sensitivity. We explored the use of a novel class of europium chelate-loaded silica nanoparticles as labels to overcome these limitations. Antibodies were covalently conjugated onto europium chelate-loaded silica nanoparticles with dextran as a linker. The resulting conjugates were used as labels in LFIA for detection of hepatitis B surface antigen (HBsAg). We performed quantification with a digital camera and Adobe Photoshop software. We also used 286 clinical samples to compare the proposed method with a quantitative ELISA. A detection limit of 0.03 microg/L was achieved, which was 100 times lower than the colloidal gold-based LFIAs and lower than ELISA. A precise quantitative dose-response curve was obtained, and the linear measurement range was 0.05-3.13 microg/L, within which the CVs were 2.3%-10.4%. Regression analysis of LFIA on ELISA results gave: log (LFIA) = -0.14 log (ELISA) + 1.03 microg/L with r = 0.99 for the quantification of HBsAg in 35 positive serum samples. Complete agreement was observed for the qualitative comparison of 286 clinical samples assayed with LFIA and ELISA. Europium chelate-loaded silica nanoparticle labels have great potential to improve LFIAs, making them useful not only for simple screening applications but also for more sensitive and quantitative immunoassays.

  11. Luminescent solutions and films of new europium complexes with chelating ligands

    Science.gov (United States)

    Kharcheva, Anastasia V.; Ivanov, Alexey V.; Borisova, Nataliya E.; Kaminskaya, Tatiana P.; Patsaeva, Svetlana V.; Popov, Vladimir V.; Yuzhakov, Viktor I.

    2015-03-01

    The development of new complexes of rare earth elements (REE) with chelating organic ligands opens up the possibility of purposeful alteration in the composition and structure of the complexes, and therefore tuning their optical properties. New ligands possessing two pyridine rings in their structure were synthesized to improve coordination properties and photophysical characteristics of REE compounds. Complexes of trivalent europium with novel chelating ligands were investigated using luminescence and absorption spectroscopy, as well as atomic force microscopy. Luminescence properties of new compounds were studied both for solutions and films deposited on the solid support. All complexes exhibit the characteristic red luminescence of Eu (III) ion with the absolute lumenescence quantum yield in polar acetonitrile solution varying from 0.21 to 1.45 % and emission lifetime ranged from 0.1 to 1 ms. Excitation spectra of Eu coordination complexes correspond with absorption bands of chelating ligand. The energy levels of the triplet state of the new ligands were determined from the phosphorescence at 77 K of the corresponding Gd (III) complexes. The morphology of films of europium complexes with different substituents in the organic ligands was investigated by atomic force microscopy (AFM). It strongly depends both on the type of substituent in the organic ligand, and the rotation speed of the spin-coater. New europium complexes with chelating ligands containing additional pyridine fragments represent outstanding candidates for phosphors with improved luminescence properties.

  12. Use of europium ions for SAD phasing of lysozyme at the Cu Kα wavelength.

    Science.gov (United States)

    Vijayakumar, Balakrishnan; Velmurugan, Devadasan

    2013-01-01

    Europium is shown to be a good anomalous scatterer in SAD phasing for solving the structure of biological macromolecules. The large value of the anomalous contribution of europium, f'' = 11.17 e(-), at the Cu Kα wavelength is an advantage in de novo phasing and automated model building. Tetragonal crystals of hen egg-white lysozyme (HEWL) incorporating europium(III) chloride (50 mM) were obtained which diffracted to a resolution of 2.3 Å at a wavelength of 1.54 Å (Cu Kα). The master data set (360° frames) was split and analyzed for anomalous signal-to-noise ratio, multiplicity, completeness, SAD phasing and automated building. The structure solution and model building of the split data sets were carried out using phenix.autosol and phenix.autobuild. The contributions of the Eu ions to SAD phasing using in-house data collection are discussed. This study revealed successful lysozyme phasing by SAD using laboratory-source data involving Eu ions, which are mainly coordinated by the side chains of Asn46, Asp52 and Asp101 together with some water molecules.

  13. Hydrothermal treatment for preparation of europium-lanthanum phosphates and exploration of their fluorescence properties

    Directory of Open Access Journals (Sweden)

    Hiroaki Onoda

    2014-04-01

    Full Text Available Europium-substituted lanthanum phosphates (Eu; 5 mol% were prepared from lanthanum nitrate, europium nitrate, and sodium polyphosphate solutions by a hydrothermal process at 120 and 160 °C up to 8 h. The obtained phosphates were studied using XRD, IR spectroscopy, TG–DTA, and SEM. UV–vis absorbance and reflectance, as well as fluorescence, were estimated as functional properties of these phosphate materials. We found that samples prepared without hydrothermal treatment were amorphous (as indicated by their XRD patterns, whereas those prepared by a hydrothermal treatment contained peaks corresponding to lanthanum orthophosphate, indicating that the hydrothermal process caused the polyphosphate(s to decompose into orthophosphate(s. The TG–DTA curves of the samples prepared by a hydrothermal treatment were different from those of the samples prepared without hydrothermal treatment. All samples reported herein had no specified shape despite using prolonged hydrothermal treatment times. Although the samples prepared without hydrothermal treatment showed only weak fluorescence peaks, those prepared by a hydrothermal treatment showed strong peaks at 556, 590, 615, and 690 nm. These peaks corresponded to transitions from 5D0 to 7F0, 7F1, 7F2, and 7F4, respectively. Collectively, these results indicate that the hydrothermal treatment is a useful method of obtaining europium-substituted lanthanum phosphates with fluorescence properties.

  14. Fabrication of coated graphite electrode for the selective determination of europium (III) ions.

    Science.gov (United States)

    Upadhyay, Anjali; Singh, Ashok Kumar; Bandi, Koteswara Rao; Jain, A K

    2013-10-15

    Preliminary complexation study showed that two ligands (ionophores) (2-((2-phenyl-2-(pyridin-2-yl)hydazono)methyl)pyridine) [L1], (2-((2-phenyl-2-(pyridin-2-yl)hydazono) methyl)phenol) [L2] can act as europium selective electrode. Europium selective coated graphite electrodes (CGE) were prepared by using ligands [L1] and [L2] and their potentiometric characteristics were determined. Membranes having different compositions of poly(vinylchloride) (PVC), the different plasticizers, anionic additives and ionophores were coated onto the graphite surface. The potential response measurements showed that the best performance was exhibited by the proposed CGE. This electrode had the widest working concentration range, Nernstian slope and fast response times of 10s. The selectivity studies showed that this electrode have higher selectivity towards Eu(3+) over a large number of cations. Furthermore, the electrode generated constant potentials in the pH range 2.7-9.0. This electrode can be used to quantify europium in soil, binary mixtures and also used as an indicator electrode in the potentiometric titration of Eu(3+) with EDTA. The proposed electrode was also successfully applied to the determination of fluoride ions in real samples. © 2013 Elsevier B.V. All rights reserved.

  15. Fluorescent Sulfur-Tagged Europium(III) Coordination Polymers for Monitoring Reactive Oxygen Species.

    Science.gov (United States)

    Wang, Huai-Song; Bao, Wen-Jing; Ren, Shi-Bin; Chen, Ming; Wang, Kang; Xia, Xing-Hua

    2015-07-07

    Oxidative stress caused by reactive oxygen species (ROS) is harmful to biological systems and implicated in various diseases. A variety of selective fluorescent probes have been developed for detecting ROS to uncover their biological functions. Generally, the preparation of the fluorescent probes usually undergoes multiple synthetic steps, and the successful fluorescent sensing usually relies on trial-and-error tests. Herein we present a simple way to prepare fluorescent ROS probes that can be used both in biological and environmental systems. The fluorescent europium(III) coordination polymers (CPs) are prepared by simply mixing the precursors [2,2'-thiodiacetic acid and Eu(NO3)3·6H2O] in ethanol. Interestingly, with the increase of reaction temperature, the product undergoes a morphological transformation from microcrystal to nanoparticle while the structure and fluorescent properties retain. The fluorescence of the sulfur-tagged europium(III) CPs can be selectively quenched by ROS, and thus, sensitive and selective monitoring of ROS in aerosols by the microcrystals and in live cells by the nanoparticles has been achieved. The results reveal that the sulfur-tagged europium(III) CPs provide a novel sensor for imaging ROS in biological and environmental systems.

  16. Facile Synthesis, Characterization, and Cytotoxic Activity of Europium-Doped Nanohydroxyapatite

    Science.gov (United States)

    Niño-Martínez, Nereyda; Patiño-Marín, Nuria

    2016-01-01

    The objective of this study was to synthetize europium-doped nanohydroxyapatite using a simple aqueous precipitation method and, thereafter, characterize and impregnate selected samples with 5-fluorouracil in order to explore the properties and the releasing capacity of this material. The nanohydroxyapatite was doped with 3, 5, 10, and 20 wt% of europium. The obtained samples were characterized after they were dried at 80°C and hydrothermal treated at 120°C by 2 hours. The samples were analyzed by transmission electron microscopy, X-ray diffraction analysis, Fourier transform infrared spectroscopy, and photoluminescence. Also, impregnation and release of 5-fluorouracil were assessed in PBS. The toxicity effects of all samples were studied using viability assays on human fibroblasts cells (HGF-1) in vitro. The sizes of the crystallites were about 10–70 nm with irregular morphology and present the phase corresponding to the JCPDS card 9–0432 for hydroxyapatite. The results of the toxicity experiments indicated that doped and undoped powders are biocompatible with fibroblasts cells. Hydroxyapatite samples doped with 5% of europium and loaded with 5-fluorouracil release almost 7 mg/L of the drug after 60 minutes in PBS and decrease the viability of HeLa cells after 24 hours. PMID:27965525

  17. Direct Electrochemical Preparation of Cobalt, Tungsten, and Tungsten Carbide from Cemented Carbide Scrap

    Science.gov (United States)

    Xiao, Xiangjun; Xi, Xiaoli; Nie, Zuoren; Zhang, Liwen; Ma, Liwen

    2017-02-01

    A novel process of preparing cobalt, tungsten, and tungsten carbide powders from cemented carbide scrap by molten salt electrolysis has been investigated in this paper. In this experiment, WC-6Co and NaCl-KCl salt were used as sacrificial anode and electrolyte, respectively. The dissolution potential of cobalt and WC was determined by linear sweep voltammetry to be 0 and 0.6 V ( vs Ag/AgCl), respectively. Furthermore, the electrochemical behavior of cobalt and tungsten ions was investigated by a variety of electrochemical techniques. Results of cyclic voltammetry (CV) and square-wave voltammetry show that the cobalt and tungsten ions existed as Co2+ and W2+ on melts, respectively. The effect of applied voltage, electrolysis current, and electrolysis times on the composition of the product was studied. Results showed that pure cobalt powder can be obtained when the electrolysis potential is lower than 0.6 V or during low current and short times. Double-cathode and two-stage electrolysis was utilized for the preparation of cobalt, tungsten carbide, and tungsten powders. Additionally, X-ray diffraction results confirm that the product collected at cathodes 1 and 2 is pure Co and WC, respectively. Pure tungsten powder was obtained after electrolysis of the second part. Scanning electron microscope results show that the diameters of tungsten, tungsten carbide, and cobalt powder are smaller than 100, 200, and 200 nm, respectively.

  18. Characterization of Nanometric-Sized Carbides Formed During Tempering of Carbide-Steel Cermets

    Directory of Open Access Journals (Sweden)

    Matus K.

    2016-06-01

    Full Text Available The aim of this article of this paper is to present issues related to characterization of nanometric-sized carbides, nitrides and/or carbonitrides formed during tempering of carbide-steel cermets. Closer examination of those materials is important because of hardness growth of carbide-steel cermet after tempering. The results obtained during research show that the upswing of hardness is significantly higher than for high-speed steels. Another interesting fact is the displacement of secondary hardness effect observed for this material to a higher tempering temperature range. Determined influence of the atmosphere in the sintering process on precipitations formed during tempering of carbide-steel cermets. So far examination of carbidesteel cermet produced by powder injection moulding was carried out mainly in the scanning electron microscope. A proper description of nanosized particles is both important and difficult as achievements of nanoscience and nanotechnology confirm the significant influence of nanocrystalline particles on material properties even if its mass fraction is undetectable by standard methods. The following research studies have been carried out using transmission electron microscopy, mainly selected area electron diffraction and energy dispersive spectroscopy. The obtained results and computer simulations comparison were made.

  19. Development of tungsten carbide-cobalt coatings

    Science.gov (United States)

    Fitzsimmons, Mark

    1999-09-01

    The discovery of WC, and the development of cemented carbides (WC-Co and WC-TiC-Co) have spawned advancements in higher speed machining of steel. The development of chemically vapor deposited (CVD) coatings has allowed even greater speeds to be realized. The production of titanium components, well known for their high specific strength, low density, corrosion resistance, and elevated temperature properties, would greatly benefit from a similar development allowing high speed machining processes. Currently, no known tool material exists that can effectively machine titanium at high speeds due to insufficient high temperature strength and/or chemical resistance. To address this problem an investigation into the development of a composite tool material combining toughness, high temperature strength and chemical resistance was pursued. Cemented carbide (WC-Co) is currently the most chemically resistant and commercially used tool material for machining Ti. The concept of applying a WC-Co coating on a high temperature deformation resistant substrate material was investigated. Two approaches, namely (i) laminated and (ii) co-deposited coatings, were chosen to chemically vapor deposit WC-Co. Thermodynamic and kinetic calculations were performed to aid in the development of CVD processes for deposition of WC and Co. The systems investigated were WF6-CH4-H2 and WCl6-CH4-H 2 for WC deposition and CoCl2-H2 for Co deposition. In the case of laminated structures the goal was to deposit nanometer scale alternating layers of WC and Co. However, development of a laminated structure led to the discovery that porosity always occurred in the Co layers at the WC/Co interface. Mass balance calculations, SEM, EDS, XRD, and metallographic analyses aided in determining that the porosity was due to the Kirkendall effect. It was observed that the diffusion of Co was enhanced by higher concentrations of soluble C in the Co layers. Effective diffusion barriers, such as TiC, were found to help

  20. Real-time in situ monitoring via europium emission of the photo-release of antitumor cisplatin from a Eu-Pt complex.

    Science.gov (United States)

    Li, Hongguang; Lan, Rongfeng; Chan, Chi-Fai; Jiang, Lijun; Dai, Lixiong; Kwong, Daniel W J; Lam, Michael Hon-Wah; Wong, Ka-Leung

    2015-09-25

    A water-soluble light-responsive antitumor agent, PtEuL, based on a cisplatin-linked europium-cyclen complex has been synthesized and evaluated for controlled cisplatin release by linear/two-photon excitation in vitro with concomitant turn-on and long-lived europium emission as a responsive traceable signal.

  1. Stress in tungsten carbide-diamond like carbon multilayer coatings

    NARCIS (Netherlands)

    Pujada, B.R.; Tichelaar, F.D.; Janssen, G.C.A.M.

    2007-01-01

    Tungsten carbide-diamond like carbon (WC-DLC) multilayer coatings have been prepared by sputter deposition from a tungsten-carbide target and periodic switching on and off of the reactive acetylene gas flow. The stress in the resulting WC-DLC multilayers has been studied by substrate curvature.

  2. Production of boron carbide powder by carbothermal synthesis of ...

    Indian Academy of Sciences (India)

    TECS

    structure with 12-atom icosahedral clusters which are linked by direct covalent bonds and through three-atom interico- sahedral chains. Boron carbide has single phase ... in nuclear industry due to its high neutron absorption co- efficient (Sinha et al 2002). Boron carbide can be prepared by reaction of elemental boron and ...

  3. Production of nano structured silicon carbide by high energy ball ...

    African Journals Online (AJOL)

    The size, shape and texture of the fresh as well as nano structured Silicon carbide powder were studied using Scanning Electron Microscopy (SEM). The fresh Silicon carbide powder particles were mostly angular in shape. The shape of the 50h milled particles is irregular and the surface morphology is rough.

  4. SEM investigation of minor constituents of carbide materials ...

    Indian Academy of Sciences (India)

    Shungite is a black, precambrian poorly crystalline minera- loid composed mainly of a natural mixture of amorphous carbon and silicate minerals, mainly quartz, .... Microchemical analysis of carbide composite material prepared from a mixture of carbidized shungite and alumina. Pointa. Elemental composition (EDS data)b ...

  5. Stochastic Distribution of Wear of Carbide Tools during Machining ...

    African Journals Online (AJOL)

    The increasing awareness of wear of carbide tools during machining operation has created doubts about the ability of this tool material to withstand stress and strain induced by the machining process. Manufacturers are beginning to question their dependence on carbide tools, seeing that they no longer meet their expected ...

  6. Size dependence of nanoscale wear of silicon carbide

    Science.gov (United States)

    Chaiyapat Tangpatjaroen; David Grierson; Steve Shannon; Joseph E. Jakes; Izabela Szlufarska

    2017-01-01

    Nanoscale, single-asperity wear of single-crystal silicon carbide (sc- SiC) and nanocrystalline silicon carbide (nc-SiC) is investigated using single-crystal diamond nanoindenter tips and nanocrystalline diamond atomic force microscopy (AFM) tips under dry conditions, and the wear behavior is compared to that of single-crystal silicon with both thin and thick native...

  7. White light emission from engineered silicon carbide

    DEFF Research Database (Denmark)

    Ou, Haiyan

    Silicon carbide (SiC) is a wide indirect bandgap semiconductor. The light emission efficiency is low in nature. But this material has very unique physical properties like good thermal conductivity, high break down field etc in addition to its abundance. Therefore it is interesting to engineer its...... is demonstrated. After optimizing the passivation conditions, strong blue-green emission from porous SiC is demonstrated as well. When combining the yellow emission from co-doped SiC and blue-green from porous SiC, a high color rendering index white light source is achieved....

  8. Silicon carbide nanowires: synthesis and cathodoluminescence

    Energy Technology Data Exchange (ETDEWEB)

    Huczko, Andrzej; Dabrowska, Agnieszka [Department of Chemistry, Warsaw University (Poland); Savchyn, Volodymyr; Karbovnyk, Ivan [Department of Electronics, Ivan Franko National University of Lviv (Ukraine); Popov, Anatoli I. [Institut Laue-Langevin, Grenoble (France); Institute of Solid State Physics, University of Latvia, Riga (Latvia)

    2009-12-15

    Silicon carbide nanowires have been synthesized via a combustion synthesis route. Structural studies showed that obtained SiC nanowires belong dominantly to 3C polytype with zincblend structure. Cathodoluminescence spectra from these nanostructures within the temperature range of 77..300 K, show obvious differences with respect to the bulk materials. The exciton band of the bulk 3C-SiC is significantly damped and the prevailing line is found to be at 1.99 eV (77 K), proving the key role of defect centers in optical properties of the investigated nanomaterial. Purified SiC nanowires. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  9. Europium doping induced symmetry deviation and its impact on the second harmonic generation of doped ZnO nanowires

    Science.gov (United States)

    Dhara, Soumen; Imakita, Kenji; Mizuhata, Minoru; Fujii, Minoru

    2014-06-01

    In this work, we investigated the effects of europium doping on the second harmonic generation (SHG) of ZnO nanowires (NWs). A non-monotonic enhancement in the SHG is observed with the increase of the europium concentration. Maximum SHG is observed from the 1 at.% europium doped ZnO NWs with an enhancement factor of 4.5. To understand the underlying mechanism, the effective second order non-linear coefficient (deff) is calculated from the theoretical fitting with consideration of the absorption effect. Microstructural characterization reveals the structural deformation of the ZnO NWs caused by europium doping. We estimated the deviation in the crystal site symmetry around the Eu3+ ions (defined as the asymmetric factor) from photoluminescence measurement and it is found to be strongly correlated with the calculated deff value. A strong linear dependence between the magnitudes of deff and the asymmetric factor suggests that deviation in the local site symmetry of the ZnO crystal by europium doping could be the most probable origin of the observed large second order non-linearity.

  10. Supported molybdenum carbide for higher alcohol synthesis from syngas

    DEFF Research Database (Denmark)

    Wu, Qiongxiao; Christensen, Jakob Munkholt; Chiarello, Gian Luca

    2013-01-01

    carbide, while the selectivity to methanol follows the opposite trend. The effect of Mo2C loading on the alcohol selectivity at a fixed K/Mo molar ratio of 0.14 could be related to the amount of K2CO3 actually on the active Mo2C phase and the size, structure and composition of the supported carbide......Molybdenum carbide supported on active carbon, carbon nanotubes, and titanium dioxide, and promoted by K2CO3, has been prepared and tested for methanol and higher alcohol synthesis from syngas. At optimal conditions, the activity and selectivity to alcohols (methanol and higher alcohols) over...... supported molybdenum carbide are significantly higher compared to the bulk carbide. The CO conversion reaches a maximum, when about 20wt% Mo2C is loaded on active carbon. The selectivity to higher alcohols increases with increasing Mo2C loading on active carbon and reaches a maximum over bulk molybdenum...

  11. Improved silicon carbide for advanced heat engines

    Science.gov (United States)

    Whalen, Thomas J.

    1987-01-01

    This is the second annual technical report entitled, Improved Silicon Carbide for Advanced Heat Engines, and includes work performed during the period February 16, 1986 to February 15, 1987. The program is conducted for NASA under contract NAS3-24384. The objective is the development of high strength, high reliability silicon carbide parts with complex shapes suitable for use in advanced heat engines. The fabrication methods used are to be adaptable for mass production of such parts on an economically sound basis. Injection molding is the forming method selected. This objective is to be accomplished in a two-phase program: (1) to achieve a 20 percent improvement in strength and a 100 percent increase in Weibull modulus of the baseline material; and (2) to produce a complex shaped part, a gas turbine rotor, for example, with the improved mechanical properties attained in the first phase. Eight tasks are included in the first phase covering the characterization of the properties of a baseline material, the improvement of those properties and the fabrication of complex shaped parts. Activities during the first contract year concentrated on two of these areas: fabrication and characterization of the baseline material (Task 1) and improvement of material and processes (Task 7). Activities during the second contract year included an MOR bar matrix study to improve mechanical properties (Task 2), materials and process improvements (Task 7), and a Ford-funded task to mold a turbocharger rotor with an improved material (Task 8).

  12. Ultrasmall Carbide Nanospheres - Formation and Electronic Properties

    Science.gov (United States)

    Reinke, Petra; Monazami, Ehsan; McClimon, John

    2015-03-01

    Metallic nanoparticles are highly coveted but are subject to rapid Ostwald ripening even at moderate temperatures limiting study of their properties. Ultrasmall transition metal carbide ``nanospheres'' are synthesized by a solid-state reaction between fullerene as carbon scaffold, and a W surface. This produces nanospheres with a narrow size distribution below 2.5 nm diameter. The nanosphere shape is defined by the scaffold and densely packed arrays can be achieved. The metal-fullerene reaction is temperature driven and progresses through an intermediate semiconducting phase until the fully metallic nanospheres are created at about 350 C. The reaction sequence is observed with STM, and STS maps yield the local density of states. The reaction presumably progresses by stepwise introduction of W-atoms in the carbon scaffold. The results of high resolution STM/STS in combination with DFT calculations are used to unravel the reaction mechanism. We will discuss the transfer of this specific reaction mechanism to other transition metal carbides. The nanospheres are an excellent testbed for the physics and chemistry of highly curved surfaces.

  13. Charge growth, dispersion in europium manganite (EuMnO{sub 3-{delta}}) ceramics revealed using opto-impedance probe

    Energy Technology Data Exchange (ETDEWEB)

    Radhakrishnan, S. [Central Electrochemical Research Institute, Karaikudi-630006, T.N. (India); Jagannathan, R., E-mail: jags57_99@yahoo.com [Central Electrochemical Research Institute, Karaikudi-630006, T.N. (India)

    2011-05-19

    Highlights: > In this study, using opto-, magneto-opto impedance techniques, experimental proof for charge growth in europium manganite (EuMnO{sub 3}) near the region of its Neel temperature is presented. > This study gives data related to dielectric properties of europium manganite. > This study may open-up new avenues for investigating the dielectric characteristics of many electronic-ceramics. - Abstract: In this preliminary report, we present the impedance characteristics of poly-crystalline europium manganite, a promising colossal magneto resistance (CMR) system investigated under optical ({approx}5 eV) and magnetic (0.1 T) perturbations yielding some clues on the charge build-up and dispersion processes. This may possibly be resulting from switching between ferromagnetic and anti-ferromagnetic phases through a charge transfer transition mediated process centering Mn{sup 3+/4+} 3d spins thereby meriting a more detailed study correlating with magnetic measurements.

  14. Rapid and accurate tumor-target bio-imaging through specific in vivo biosynthesis of a fluorescent europium complex.

    Science.gov (United States)

    Ye, Jing; Wang, Jianling; Li, Qiwei; Dong, Xiawei; Ge, Wei; Chen, Yun; Jiang, Xuerui; Liu, Hongde; Jiang, Hui; Wang, Xuemei

    2016-04-01

    A new and facile method for rapidly and accurately achieving tumor targeting fluorescent images has been explored using a specifically biosynthesized europium (Eu) complex in vivo and in vitro. It demonstrated that a fluorescent Eu complex could be bio-synthesized through a spontaneous molecular process in cancerous cells and tumors, but not prepared in normal cells and tissues. In addition, the proteomics analyses show that some biological pathways of metabolism, especially for NADPH production and glutamine metabolism, are remarkably affected during the relevant biosynthesis process, where molecular precursors of europium ions are reduced to fluorescent europium complexes inside cancerous cells or tumor tissues. These results proved that the specific self-biosynthesis of a fluorescent Eu complex by cancer cells or tumor tissues can provide a new strategy for accurate diagnosis and treatment strategies in the early stages of cancers and thus is beneficial for realizing precise surgical intervention based on the relevant cheap and readily available agents.

  15. Polystyrene latex particles containing europium complexes prepared by miniemulsion polymerization using bovine serum albumin as a surfactant for biochemical diagnosis.

    Science.gov (United States)

    Aikawa, Tatsuo; Mizuno, Akihiro; Kohri, Michinari; Taniguchi, Tatsuo; Kishikawa, Keiki; Nakahira, Takayuki

    2016-09-01

    Luminescent particles have been attracting significant attention because they can be used in biochemical applications, such as detecting and imaging biomolecules. In this study, luminescent polystyrene latex particles were prepared through miniemulsion polymerization of styrene with dissolved europium complexes in the presence of bovine serum albumin (BSA) and poly(ethylene glycol) monomethoxy methacrylate as surfactants. The solubility of the europium complex in styrene has a strong effect on the yield of the particle. Europium tris(2-thenoyl trifluoroacetonate) di(tri-n-octyl phosphine oxide), which has a high solubility in styrene, was sufficiently incorporated into the polystyrene particles compared to europium tris(2-thenoyl trifluoroacetonate), which has a low solubility in styrene. The luminescence property of the europium complex could remain intact even after its incorporation through the miniemulsion polymerization. In the aqueous dispersion, the resulting particles could emit strong luminescence, which is a characteristic of the europium complex. The antibody fragments were covalently attached to BSA-covered particles after a reaction with a bifunctional linker, N-(6-maleimidocaproyloxy)succinimide. The time-resolved fluoroimmunoassay technique showed that 3.3pg/mL of human α-fetoproteins (AFP) can be detected by using the resulting luminescent particles. An immunochromatographic assay using the resulting particles was also performed as a convenient method to qualitatively detect biomolecules. The detection limit of AFP measured by the immunochromatographic assay was determined to be 2000pg/mL. These results revealed that the luminescent particles obtained in this study can be utilized for the highly sensitive detection of biomolecules and in vitro biochemical diagnosis. Copyright © 2016 Elsevier B.V. All rights reserved.

  16. Development of a new family of cemented carbides for geothermal drilling. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Rowcliff, D.J.

    1983-10-01

    The contractor fabricated samples of cemented carbides based on tantalum carbide and niobium carbide with cobalt and nickel binders. These materials were evaluated for use as rock-bit inserts in geothermal drilling. Carbon content in the niobium carbide (NbC/sub x/) and the tantalum carbide (TaC/sub x/) was varied (x is 0.83 to 1.0) and the effect of these changes on the carbides' mechanical properties was examined. Hardness, toughness, and abrasive wear resistance of the new materials were measured and compared to properties of tungsten carbide grades used in rock-bit inserts.

  17. Computational Studies of Physical Properties of Boron Carbide

    Energy Technology Data Exchange (ETDEWEB)

    Lizhi Ouyang

    2011-09-30

    The overall goal is to provide valuable insight in to the mechanisms and processes that could lead to better engineering the widely used boron carbide which could play an important role in current plight towards greener energy. Carbon distribution in boron carbide, which has been difficult to retrieve from experimental methods, is critical to our understanding of its structure-properties relation. For modeling disorders in boron carbide, we implemented a first principles method based on supercell approach within our G(P,T) package. The supercell approach was applied to boron carbide to determine its carbon distribution. Our results reveal that carbon prefers to occupy the end sites of the 3-atom chain in boron carbide and further carbon atoms will distribute mainly on the equatorial sites with a small percentage on the 3-atom chains and the apex sites. Supercell approach was also applied to study mechanical properties of boron carbide under uniaxial load. We found that uniaxial load can lead to amorphization. Other physical properties of boron carbide were calculated using the G(P,T) package.

  18. Highly specific ''sensing'' of tryptophan by a luminescent europium(III) complex

    Energy Technology Data Exchange (ETDEWEB)

    Stubenrauch, Jan A.; Mevissen, Christian; Schulte, Marie F.; Bochenek, Steffen; Albrecht, Markus [RWTH Univ. Aachen (Germany). Inst. fuer Organische Chemie; Subramanian, Palani S. [Central Salt and Marine Chemicals, Research Institute (CSRI), Gujarat (India)

    2016-07-01

    The europium(III) complex 1-Cl{sub 3} (S,S-2,2{sup '}-(((1,10-phenanthroline-2,9-diyl)bis(methanylylidene))bis (azanylyliden e))bis(3-methylbutanamide)europiumtrichloride) undergoes, only in the presence of the amino acid tryptophan, a change of emission at 615 nm. In the presence of few equivalents of tryptophan, emission of the europium complex is enhanced while it disappears upon addition of large amounts. This behavior can be assigned to displacement of the sensitizing phenanthroline ligand of 1-Cl{sub 2} x Trp in the latter case.

  19. Electron-induced desorption of europium atoms from oxidized tungsten surface: concentration dependence of low-energy peak

    CERN Document Server

    Davydov, S Y

    2002-01-01

    One discusses nature of electron induced desorption of Eu sup 0 europium atoms under E sub e irradiating electron low-energies (approx 30 eV) and peculiarities of yield dependence of Eu sup 0 atoms on their concentration at oxidized tungsten surface. Primary act of vacancy origination in europium adatom inner 5p-shell turned to be the determining stage. Evaluations have shown that just the first of two possible scenarios of ionization (electron intra-atomic to Eu adatom external quasi-level or realise of knocked out electron into vacuum) leads to Eu sup 0 desorption. One determined concentration threshold for yield of Eu sup 0 atoms

  20. Precipitation behavior of carbides in high-carbon martensitic stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Qin-tian; Li, Jing; Shi, Cheng-bin; Yu, Wen-tao; Shi, Chang-min [University of Science and Technology, Beijing (China). State Key Laboratory of Advanced Metallurgy; Li, Ji-hui [Yang Jiang Shi Ba Zi Group Co., Ltd, Guangdong (China)

    2017-01-15

    A fundamental study on the precipitation behavior of carbides was carried out. Thermo-calc software, scanning electron microscopy, electron probe microanalysis, transmission electron microscopy, X-ray diffractometry and high-temperature confocal laser scanning microscopy were used to study the precipitation and transformation behaviors of carbides. Carbide precipitation was of a specific order. Primary carbides (M7C3) tended to be generated from liquid steel when the solid fraction reached 84 mol.%. Secondary carbides (M7C3) precipitated from austenite and can hardly transformed into M23C6 carbides with decreasing temperature in air. Primary carbides hardly changed once they were generated, whereas secondary carbides were sensitive to heat treatment and thermal deformation. Carbide precipitation had a certain effect on steel-matrix phase transitions. The segregation ability of carbon in liquid steel was 4.6 times greater that of chromium. A new method for controlling primary carbides is proposed.

  1. A silicon carbide array for electrocorticography and peripheral nerve recording

    Science.gov (United States)

    Diaz-Botia, C. A.; Luna, L. E.; Neely, R. M.; Chamanzar, M.; Carraro, C.; Carmena, J. M.; Sabes, P. N.; Maboudian, R.; Maharbiz, M. M.

    2017-10-01

    Objective. Current neural probes have a limited device lifetime of a few years. Their common failure mode is the degradation of insulating films and/or the delamination of the conductor-insulator interfaces. We sought to develop a technology that does not suffer from such limitations and would be suitable for chronic applications with very long device lifetimes. Approach. We developed a fabrication method that integrates polycrystalline conductive silicon carbide with insulating silicon carbide. The technology employs amorphous silicon carbide as the insulator and conductive silicon carbide at the recording sites, resulting in a seamless transition between doped and amorphous regions of the same material, eliminating heterogeneous interfaces prone to delamination. Silicon carbide has outstanding chemical stability, is biocompatible, is an excellent molecular barrier and is compatible with standard microfabrication processes. Main results. We have fabricated silicon carbide electrode arrays using our novel fabrication method. We conducted in vivo experiments in which electrocorticography recordings from the primary visual cortex of a rat were obtained and were of similar quality to those of polymer based electrocorticography arrays. The silicon carbide electrode arrays were also used as a cuff electrode wrapped around the sciatic nerve of a rat to record the nerve response to electrical stimulation. Finally, we demonstrated the outstanding long term stability of our insulating silicon carbide films through accelerated aging tests. Significance. Clinical translation in neural engineering has been slowed in part due to the poor long term performance of current probes. Silicon carbide devices are a promising technology that may accelerate this transition by enabling truly chronic applications.

  2. Carbide inclusions in delta-phase plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Baros, T. (Thomas); Davis, C. C. (Charles C.); Hawkins, H. T. (Heather T.); Ruggiero, M. J. (Matthew J.); Valentine, S. J. (Scott J.); Storey, B. G. (Bradford G.); Roybal, L. (Lawrence)

    2004-01-01

    Inclusions in plutonium alloys are common and depend on the processing parameters and age of the material. Plutonium-bearing compounds frequently observed as inclusions include: hydrides, nitrides, oxides, and carbides. Optical metallography and electron probe microanalysis (EPMA) were used to characterize plutonium carbide (PuC) inclusions in delta-phase plutonium. The structural complexities of plutonium combined with its radioactivity, pyrophoric nature, and toxicity create a unique challenge to revealing and interpreting its microstructures. Samples of delta-phase Pu-239 were used in this study. Note that the delta phase is stabilized to room temperature by the addition of {approx}1 wt% gallium. After samples are cut, mounted in epoxy, ground, and polished, they are then electropolished at 40 V in an etchant of 10 vol.% nitric acid and 90 vol.% dimethylformamide and electroetched at 6 V in the same etchant. Optical micrographs were collected using an inverted metallograph equipped with a digital camera. Back-scattered electron images and elemental maps of the plutonium, carbon, and gallium content were collected using an EPMA equipped with wavelength dispersive spectrometers. After reviewing our data and consulting work done by Cramer and Bergin it was determined that the inclusions were acicular plutonium carbides and were formed during the casting process at the time the material was manufactured. It is believed that these inclusions would affect the high strain-rate properties. The response of plutonium alloys during implosion is critical to the performance and reliability of a nuclear weapon. We plan to further investigate these inclusions to gather information about orientation, composition, structure, and concentration. An x-ray diffractometer with a 10 {micro}m beam diameter will be used to gather information on the orientation and structure of individual inclusions. A field-emission scanning electron microscope (SEM) with a WDS will be used at low

  3. Optical properties of europium(III) {beta}-diketonate/polymer-doped systems using supercritical carbon dioxide

    Energy Technology Data Exchange (ETDEWEB)

    Gerasimova, V.I., E-mail: vis@srd.sinp.msu.ru [Skobel' tsyn Research Institute of Nuclear Physics, Moscow State University, Leninskie Gory 1-2, GSP-1, 119991 Moscow (Russian Federation); Antoshkov, A.A.; Zavorotny, Yu.S.; Rybaltovskii, A.O. [Skobel' tsyn Research Institute of Nuclear Physics, Moscow State University, Leninskie Gory 1-2, GSP-1, 119991 Moscow (Russian Federation); Lemenovskii, D.A., E-mail: dali@org.chem.msu.ru [Chemistry Department, Moscow State University, Leninskie Gory 1-3, GSP-1, 119991 Moscow (Russian Federation)

    2013-02-15

    The optical properties of fluoropolymers and polypropylene doped with europium(III) {beta}-diketonates Eu(L){sub 3}{center_dot}2H{sub 2}O and Eu(L){sub 3}phen (L: fod=6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedionato, bta=4,4,4-trifluoro-1-phenyl-1,3-butanedione, tta=4,4,4-trifluoro-1-(2-thienyl)-1,3-butanedione, and phen=1,10-phenanthroline) using supercritical carbon dioxide were investigated by absorption and emission spectra. A comparative analysis of the PL decay times of Eu{sup 3+} ions in the initial europium (III) {beta}-diketonates and impregnated fluoropolymers was carried out. The supercritical fluid (SCF) impregnation of polymer samples with europium(III) {beta}-diketonates containing 1,10-phenanthroline was found to be obstructed differently depending on the type of ligand in the entire investigated impregnation temperature range (T{sub SCF}=50-90 Degree-Sign S). It is shown that from the variety of Eu(L){sub 3}phen only Eu(fod){sub 3}phen can be introduced into the polymer matrix by this method. - Highlights: Black-Right-Pointing-Pointer The optical properties of polymers doped with Eu{sup 3+} {beta}-diketonates using SC CO{sub 2} were investigated. Black-Right-Pointing-Pointer A comparative analysis of the PL decay times in the initial Eu{sup 3+} {beta}-diketonates and doped polymers was carried out. Black-Right-Pointing-Pointer The SC CO{sub 2} impregnation of polymers with Eu{sup 3+} {beta}-diketonates containing 1,10-phenanthroline was found to be obstructed.

  4. Reverse lyotropic liquid crystals from europium nitrate and P123 with enhanced luminescence efficiency.

    Science.gov (United States)

    Yi, Sijing; Li, Qintang; Liu, Hongguo; Chen, Xiao

    2014-10-02

    Fabrication of lyotropic aggregates containing the lanthanide ions is becoming a preferable way to prepare novel functional materials. Here, the lyotropic liquid crystals (LLCs) of reverse hexagonal, reverse bicontinuous cubic, and lamellar phases have been constructed in sequence directly from the mixtures of Eu(NO3)3·6H2O and Pluronic P123 amphiphilc block copolymer with increasing the salt proportion. Their phase types and structural characteristics were analyzed using polarized optical microscopy (POM) and small-angle X-ray scattering (SAXS) measurements. The driving forces of reverse LLC phase formation were investigated using Fourier-transformed infrared spectroscopy (FTIR) and rheological measurements. The hydrated europium salt was found to act not only as a solvent here, but also as the bridge to form hydrogen bonding between coordinated water molecules and PEO blocks, which played a key role in the reverse LLCs formation. Compared to those in aqueous solutions and solid state, the enhanced luminescence quantum yields and prolonged excited state lifetimes were observed in two europium containing reverse mesophases. The luminescence quenching effect of lanthanide ions was efficiently suppressed, probably due to the substitution of coordinated water molecules by oxyethyl groups of P123 and ordered phase structures of LLCs, where the coordinated europium ions were confined and isolated by PEO blocks. The optimum luminescence performance was then found to exist in the reverse hexagonal phase. The obtained results on such lanthanide-induced reverse LLCs should be referable for designing new luminescent soft materials construction to expand their application fields.

  5. How Do Radionuclides Accumulate in Marine Organisms? A Case Study of Europium with Aplysina cavernicola.

    Science.gov (United States)

    Maloubier, Melody; Shuh, David K; Minasian, Stefan G; Pacold, Joseph I; Solari, Pier-Lorenzo; Michel, Hervé; Oberhaensli, François R; Bottein, Yasmine; Monfort, Marguerite; Moulin, Christophe; Den Auwer, Christophe

    2016-10-04

    In the ocean, complex interactions between natural and anthropogenic radionuclides, seawater, and diverse marine biota provide a unique window through which to examine ecosystem and trophic transfer mechanisms in cases of accidental dissemination. The nature of interaction between radionuclides, the marine environment, and marine species is therefore essential for better understanding transfer mechanisms from the hydrosphere to the biosphere. Although data pertaining to the rate of global transfer are often available, little is known regarding the mechanism of environmental transport and uptake of heavy radionuclides by marine species. Among marine species, sponges are immobile active filter feeders and have been identified as hyperaccumulators of several heavy metals. We have selected the Mediterranean sponge Aplysina cavernicola as a model species for this study. Actinide elements are not the only source of radioactive release in cases of civilian nuclear events; however, their physicochemical transfer mechanisms to marine species remain largely unknown. We have targeted europium(III) as a representative of the trivalent actinides such as americium or curium. To unravel biological uptake mechanisms of europium in A. cavernicola, we have combined radiometric (γ) measurements with spectroscopic (time-resolved laser-induced fluorescence spectroscopy, TRLIFS, and X-ray absorption near-edge structure, XANES) and imaging (transmission electron microscopy, TEM, and scanning transmission X-ray microscopy, STXM) techniques. We have observed that the colloids of NaEu(CO3)2·nH2O formed in seawater are taken up by A. cavernicola with no evidence that lethal dose has been reached in our working conditions. Spectroscopic results suggest that there is no change of speciation during uptake. Finally, TEM and STXM images recorded at different locations across a sponge cross section, together with differential cell separation, indicate the presence of europium particles (around

  6. Hugoniot equation of state and dynamic strength of boron carbide

    Energy Technology Data Exchange (ETDEWEB)

    Grady, Dennis E. [Applied Research Associates, Southwest Division, 4300 San Mateo Blvd NE, A-220, Albuquerque, New Mexico 87110-129 (United States)

    2015-04-28

    Boron carbide ceramics have been particularly problematic in attempts to develop adequate constitutive model descriptions for purposes of analysis of dynamic response in the shock and impact environment. Dynamic strength properties of boron carbide ceramic differ uniquely from comparable ceramics. Furthermore, boron carbide is suspected, but not definitely shown, to undergoing polymorphic phase transformation under shock compression. In the present paper, shock-wave compression measurements conducted over the past 40 years are assessed for the purpose of achieving improved understanding of the dynamic equation of state and strength of boron carbide. In particular, attention is focused on the often ignored Los Alamos National Laboratory (LANL) Hugoniot measurements performed on porous sintered boron carbide ceramic. The LANL data are shown to exhibit two compression anomalies on the shock Hugoniot within the range of 20–60 GPa that may relate to crystallographic structure transitions. More recent molecular dynamics simulations on the compressibility of the boron carbide crystal lattice reveal compression transitions that bear similarities to the LANL Hugoniot results. The same Hugoniot data are complemented with dynamic isentropic compression data for boron carbide extracted from Hugoniot measurements on boron carbide and copper granular mixtures. Other Hugoniot measurements, however, performed on near-full-density boron carbide ceramic differ markedly from the LANL Hugoniot data. These later data exhibit markedly less compressibility and tend not to show comparable anomalies in compressibility. Alternative Hugoniot anomalies, however, are exhibited by the near-full-density data. Experimental uncertainty, Hugoniot strength, and phase transformation physics are all possible explanations for the observed discrepancies. It is reasoned that experimental uncertainty and Hugoniot strength are not likely explanations for the observed differences. The notable

  7. The all boron carbide diode neutron detector: Comparison with theory

    Energy Technology Data Exchange (ETDEWEB)

    Caruso, A.N. [Department of Physics and Astronomy, Behlen Laboratory of Physics, University of Nebraska, P.O. Box 880111, Lincoln, NE 68588-0111 (United States); Nebraska Center for Materials and Nanoscience, 116 Brace Laboratory, University of Nebraska, P.O. Box 880111, Lincoln, NE 68588-0111 (United States); College of Engineering, N245 Walter Scott Engineering Center, 17th Vine Street, University of Nebraska-Lincoln, Lincoln, NE 68588-0511 (United States); Center for Nanoscale Science and Engineering, North Dakota State University, Fargo, ND 58102 (United States); Dowben, P.A. [Department of Physics and Astronomy, Behlen Laboratory of Physics, University of Nebraska, P.O. Box 880111, Lincoln, NE 68588-0111 (United States) and Nebraska Center for Materials and Nanoscience, 116 Brace Laboratory, University of Nebraska, P.O. Box 880111, Lincoln, NE 68588-0111 (United States)]. E-mail: pdowben@unl.edu; Balkir, S. [Nebraska Center for Materials and Nanoscience, 116 Brace Laboratory, University of Nebraska, P.O. Box 880111, Lincoln, NE 68588-0111 (United States); Department of Electrical Engineering, College of Engineering, 237N Walter Scott Engineering Center, 17th Vine Street, University of Nebraska-Lincoln, Lincoln, NE 68588-0511 (United States); Schemm, Nathan [Nebraska Center for Materials and Nanoscience, 116 Brace Laboratory, University of Nebraska, P.O. Box 880111, Lincoln, NE 68588-0111 (United States); Department of Electrical Engineering, College of Engineering, 237N Walter Scott Engineering Center, 17th Vine Street, University of Nebraska-Lincoln, Lincoln, NE 68588-0511 (United States)] (and others)

    2006-11-25

    A boron carbide diode detector, fabricated from two different polytypes of semiconducting boron carbide, will detect neutrons in reasonable agreement with theory. Small deviations from the model calculations occur due to the detection efficiencies of the {sup 10}B capture products Li plus {alpha} sum signal differing somewhat from expectation in the thin diodes. The performance of the all boron carbide neutron detector does depart from the behavior of devices where a boron rich neutron capture layer is distinct from the diode charge collection region (i.e. a conversion layer solid state detector), as is expected.

  8. Separation of Nuclear Fuel Surrogates from Silicon Carbide Inert Matrix

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Ronald Baney

    2008-12-15

    The objective of this project has been to identify a process for separating transuranic species from silicon carbide (SiC). Silicon carbide has become one of the prime candidates for the matrix in inert matrix fuels, (IMF) being designed to reduce plutonium inventories and the long half-lives actinides through transmutation since complete reaction is not practical it become necessary to separate the non-transmuted materials from the silicon carbide matrix for ultimate reprocessing. This work reports a method for that required process.l

  9. Trace electrochemical analysis of Europium, Ytterbium, and Cerium at their joint presence in solution

    Directory of Open Access Journals (Sweden)

    Rema Matakova

    2012-03-01

    Full Text Available In the course of several decades at the department of analytical chemistry and chemistry of rare elements there were studied the electrode processes with participation of rare-earth metals (REM in accordance with the long awaiting problem of the development of rare-metal and rare-earth branch of non-ferrous metallurgy of Kazakhstan. With the aim of express and highly sensitive analytical control of raw materials and final product of rare-earth industry there were developed the methods of inversion-voltamperometric determination of low concentrations of europium, ytterbium and cerium under the conditions of their individual and combined presence in the solution.

  10. Synergistic extraction of europium and americium into nitrobenzene by using hydrogen dicarbollylcobaltate and dodecaethylene glycol.

    Science.gov (United States)

    Makrlík, Emanuel; Vaňura, Petr; Selucký, Pavel

    2013-01-01

    Extraction of microamounts of europium and americium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H+B-) in the presence of dodecaethylene glycol (DDEG, L) has been investigated. The equilibrium data have been explained assuming that the species HL+, H2L2+, ML3+ and MH-1L2+ (M3+ = Eu3+, Am3+; L = DDEG) are extracted into the organic phase. The values of extraction and stability constants of the complex species in nitrobenzene saturated with water have been determined. It was found that in this nitrobenzene medium, the stability constant of the EuL3+ complex is comparable with that of AmL3+.

  11. Red/blue electroluminescence from europium-doped organic light emitting diodes

    Science.gov (United States)

    Hagen, Joshua A.; Li, Wayne X.; Grote, James G.; Steckl, Andrew J.

    2006-02-01

    Red/Blue emitting organic light emitting diodes (OLED) devices have been obtained using a Europium-doped organic emitting layer (NPB:Eu). The Eu-doped OLEDs emit in 2 color ranges: a broad blue (~420-500nm) band due to NPB emission and a narrow red peak at 620nm due to Eu emission. The red/blue devices achieve a brightness ~13x more intense than a similarly structured green (Alq 3) emitting OLED. These NPB:Eu emitting structures also reach a maximum efficiency of 0.2 cd/A at brightnesses above 100 cd/m2.

  12. Test of zircon materials for sorption of europium; Pruebas de materiales circoniferos para sorcion de europio

    Energy Technology Data Exchange (ETDEWEB)

    Ordonez R, E.; Fernandez V, S.M.; Garcia R, G. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2003-07-01

    In previous works it has already been made notice that some phosphates have the property of sipping radioactive metals in solution, what takes advantage to fabricate reactive barriers that are placed in the repositories of nuclear wastes. In our laboratory it has been obtained to the zirconium silicate (ZrSiO{sub 4}) and the alpha zirconium hydrogen phosphate (Zr(HPO{sub 4}) 2H{sub 2}0) starting from sea sand in an easy and economic way. With the interest of knowing if these compounds can be used in contention barriers the evaluation of their surface properties it is made and of europium sorption. (Author)

  13. Sol-Gel Synthesis, X-Ray Diffraction Studies, and Electric Conductivity of Sodium Europium Silicate

    Directory of Open Access Journals (Sweden)

    Ekaterina V. Borisova

    2013-01-01

    Full Text Available Sodium europium silicate, NaEu9(SiO46O2, with apatite structure has been obtained and studied using X-ray diffraction and SEM. It has been shown that sodium sublimation does not take place upon synthesis by the sol-gel method. Rietveld refinement has revealed that sodium atoms are ordered and occupy the 4f position. O(4 atoms not related to silicate ions are placed at the centers of Eu(2 triangles. DC and AC electric conductivity and activation energy have been determined for the compound studied.

  14. New Class of Bright and Highly Stable Chiral Cyclen Europium Complexes for Circularly Polarized Luminescence Applications.

    Science.gov (United States)

    Dai, Lixiong; Lo, Wai-Sum; Coates, Ian D; Pal, Robert; Law, Ga-Lai

    2016-09-06

    High glum values of +0.30 (ΔJ = 1, 591 nm, in DMSO) and -0.23 (ΔJ = 1, 589 nm, in H2O) were recorded in our series of newly designed macrocyclic europium(III) complexes. A sterically locking approach involving a bidentate chromophore is adopted to control the formation of one stereoisomer, giving rise to extreme rigidity, high stability, and high emission intensity. The combination of a chiral substituent on a macrocyclic chelate for lanthanide ions opens up new perspectives for the further development of circulary polarized luminescent chiral tags in optical and bioapplications.

  15. A microemulsion preparation of nanoparticles of europium in silica with luminescence enhancement using silver

    Science.gov (United States)

    Ma, Zhi Ya; Dosev, Dosi; Kennedy, Ian M

    2010-01-01

    A facile one-pot microemulsion method has been developed for the synthesis of spherical silver core–silica shell (Ag@SiO2) nanoparticles with europium chelates doped in the shell through a silane agent. The method is significantly more straightforward than other extant methods. Measurements of the luminescent emissions from the Ag@SiO2 nanoparticles, in comparison with control silica nanoparticles without silver cores, showed that the presence of the silver cores can increase the fluorescence intensity approximately 24-fold and decrease the luminescence lifetime. This enhancement offers a potential increase in overall particle detectability with increased fluorophore photostability. PMID:19417456

  16. Metal Controlled Diastereoselective Self-assembly and Circularly Polarized Luminescence of a Chiral Heptanuclear Europium Wheel

    Science.gov (United States)

    Bozoklu, Gülay; Gateau, Christelle; Imbert, Daniel; Pécaut, Jacques; Robeyns, Koen; Filinchuk, Yaroslav; Memon, Farah; Muller, Gilles

    2012-01-01

    The chiral dissymmetric tetradentate ligand SPhbipox (6’-(4-phenyloxazolin-2-yl)-2,2’-bipyridine-6-carboxylic acid) leads to the diastereoselective assembly of a homochiral Eu(III) triangle and of a highly emissive (QY=27%) heptanuclear wheel which is the largest example of chiral luminescent complex of Eu(III) reported to date. We show that the nuclearity of the assembly is controlled by the solvent and the europium cation. All the compounds show large circularly polarized luminescence with an activity which varies with the nature of the assembly (highest for the homochiral trimer). PMID:22548280

  17. A europium(III)-based PARACEST agent for sensing singlet oxygen by MRI

    Science.gov (United States)

    Song, Bo; Wu, Yunkou; Yu, Mengxiao; Zhao, Piyu; Zhou, Cheng; Kiefer, Garry E.

    2013-01-01

    A europium (III) DOTA-tetraamide complex was designed as a MRI sensor of singlet oxygen (1O2). The water soluble, thermodynamically stable complex reacts rapidly with 1O2 to form an endoperoxide derivative that results in an ∼3 ppm shift in the position of the Eu(III)-bound water chemical exchange saturation transfer (CEST) peak. The potential of using this probe to detect accumulation of the endoperoxide derivative in biological media by ratiometric CEST imaging was demonstrated. PMID:23575743

  18. Stable field emission from nanoporous silicon carbide

    Science.gov (United States)

    Kang, Myung-Gyu; Lezec, Henri J.; Sharifi, Fred

    2013-02-01

    We report on a new type of stable field emitter capable of electron emission at levels comparable to thermal sources. Such an emitter potentially enables significant advances in several important technologies which currently use thermal electron sources. These include communications through microwave electronics, and more notably imaging for medicine and security where new modalities of detection may arise due to variable-geometry x-ray sources. Stable emission of 6 A cm-2 is demonstrated in a macroscopic array, and lifetime measurements indicate these new emitters are sufficiently robust to be considered for realistic implementation. The emitter is a monolithic structure, and is made in a room-temperature process. It is fabricated from a silicon carbide wafer, which is formed into a highly porous structure resembling an aerogel, and further patterned into an array. The emission properties may be tuned both through control of the nanoscale morphology and the macroscopic shape of the emitter array.

  19. Silicon carbide devices for radiation hard applications

    Energy Technology Data Exchange (ETDEWEB)

    McMullin, P.G.; Barrett, D.L.; Hopkins, R.H.; Spitznagel, J.A. (Westinghouse Sciences and Technology Center, 1310 Beulah Road, Pittsburgh, Pennsylvania 15235 (United States)); Powell, J.A. (NASA Lewis Research Center, 21000 Brookpark Road, Cleveland Ohio 44135 (United States)); Thome, F.V. (Sandia National Laboratory, Albuquerque, New Mexico 87123 (United States))

    1993-01-15

    Silicon carbide has long been recognized as a favorable material for applications at high temperatures and in radiation environments, but device development has been hindered by lack of adequate substrates. This paper reviews the current Westinghouse material development effort aimed at the growth of high quality 6H boules and describes 6H SiC devices fabricated on Westinghouse substrates. MESFET and MOSFET transistors were made in a microwave power design layout. The MESFET and MOSFET transistors were subjected to a total gamma irradiation of 1 megaGray (100 megarad) and exhibited threshold voltage shifts of about 0.4 and 1.2 Volts respectively with little change in bulk material parameters.

  20. Silicon carbide devices for radiation hard applications

    Science.gov (United States)

    McMullin, Paul G.; Barrett, Donovan L.; Hopkins, Richard H.; Spitznagel, John A.; Powell, J. Anthony; Thome, Frank V.

    1993-01-01

    Silicon carbide has long been recognized as a favorable material for applications at high temperatures and in radiation environments, but device development has been hindered by lack of adequate substrates. This paper reviews the current Westinghouse material development effort aimed at the growth of high quality 6H boules and describes 6H SiC devices fabricated on Westinghouse substrates. MESFET and MOSFET transistors were made in a microwave power design layout. The MESFET and MOSFET transistors were subjected to a total gamma irradiation of 1 megaGray (100 megarad) and exhibited threshold voltage shifts of about 0.4 and 1.2 Volts respectively with little change in bulk material parameters.

  1. Neutron irradiation induced amorphization of silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Snead, L.L.; Hay, J.C. [Oak Ridge National Lab., TN (United States)

    1998-09-01

    This paper provides the first known observation of silicon carbide fully amorphized under neutron irradiation. Both high purity single crystal hcp and high purity, highly faulted (cubic) chemically vapor deposited (CVD) SiC were irradiated at approximately 60 C to a total fast neutron fluence of 2.6 {times} 10{sup 25} n/m{sup 2}. Amorphization was seen in both materials, as evidenced by TEM, electron diffraction, and x-ray diffraction techniques. Physical properties for the amorphized single crystal material are reported including large changes in density ({minus}10.8%), elastic modulus as measured using a nanoindentation technique ({minus}45%), hardness as measured by nanoindentation ({minus}45%), and standard Vickers hardness ({minus}24%). Similar property changes are observed for the critical temperature for amorphization at this neutron dose and flux, above which amorphization is not possible, is estimated to be greater than 130 C.

  2. Arsenic carbide monolayer: First principles prediction

    Science.gov (United States)

    Naseri, Mosayeb

    2017-11-01

    Using the first principles calculation, a new pentagonal indirect band gap semiconductor namely arsenic carbide monolayer (As2C) is predicted. The calculated cohesive energy of -5.69 eV/atom the thermodynamic stability of the predicted monolayer. Furthermore, the kinetic stability of the monolayer is examined by phonon dispersion calculation, where the absence of imaginary modes and high value of maximum phonon frequency confirms the high dynamic stability of the proposed monolayer. Investigating in the electronic properties of the As2C monolayer indicates that it is a semiconductor with an indirect band gap of 1.62 eV. Analyzing the optical properties of the As2C monolayer imply that the monolayer has high UV light absorption, however, it has an almost zero absorption in visible region of electromagnetic spectra. The specific electronic and optical properties imply that As2C monolayer may be used in new generation of nano-optoelectronic technology design.

  3. Silicon Carbide Nanotube Oxidation at High Temperatures

    Science.gov (United States)

    Ahlborg, Nadia; Zhu, Dongming

    2012-01-01

    Silicon Carbide Nanotubes (SiCNTs) have high mechanical strength and also have many potential functional applications. In this study, SiCNTs were investigated for use in strengthening high temperature silicate and oxide materials for high performance ceramic nanocomposites and environmental barrier coating bond coats. The high · temperature oxidation behavior of the nanotubes was of particular interest. The SiCNTs were synthesized by a direct reactive conversion process of multiwall carbon nanotubes and silicon at high temperature. Thermogravimetric analysis (TGA) was used to study the oxidation kinetics of SiCNTs at temperatures ranging from 800degC to1300degC. The specific oxidation mechanisms were also investigated.

  4. Helium behaviour in implanted boron carbide

    Directory of Open Access Journals (Sweden)

    Motte Vianney

    2015-01-01

    Full Text Available When boron carbide is used as a neutron absorber in nuclear power plants, large quantities of helium are produced. To simulate the gas behaviour, helium implantations were carried out in boron carbide. The samples were then annealed up to 1500 °C in order to observe the influence of temperature and duration of annealing. The determination of the helium diffusion coefficient was carried out using the 3He(d,p4He nuclear reaction (NRA method. From the evolution of the width of implanted 3He helium profiles (fluence 1 × 1015/cm2, 3 MeV corresponding to a maximum helium concentration of about 1020/cm3 as a function of annealing temperatures, an Arrhenius diagram was plotted and an apparent diffusion coefficient was deduced (Ea = 0.52 ± 0.11 eV/atom. The dynamic of helium clusters was observed by transmission electron microscopy (TEM of samples implanted with 1.5 × 1016/cm2, 2.8 to 3 MeV 4He ions, leading to an implanted slab about 1 μm wide with a maximum helium concentration of about 1021/cm3. After annealing at 900 °C and 1100 °C, small (5–20 nm flat oriented bubbles appeared in the grain, then at the grain boundaries. At 1500 °C, due to long-range diffusion, intra-granular bubbles were no longer observed; helium segregates at the grain boundaries, either as bubbles or inducing grain boundaries opening.

  5. Oxidation behaviour of boron carbide powder

    Energy Technology Data Exchange (ETDEWEB)

    Li, Y.Q. [College of Materials Science and Engineering, Nanjing University of Technology, New Model Road 5, Nanjing, Jiangsu 210009 (China)]. E-mail: Li.Yuanqiang@nims.go.jp; Qiu, T. [College of Materials Science and Engineering, Nanjing University of Technology, New Model Road 5, Nanjing, Jiangsu 210009 (China)

    2007-01-25

    Isothermal oxidation behaviour of powdered boron carbide (B{sub 4}C) with the fine (1.52 {mu}m), medium (22.5 {mu}m) and coarse (59.6 {mu}m) particle size has been studied in air ranging from 500 to 800 deg. C. The oxidation rate strongly depends on the particle size of boron carbide and temperature. The smaller particle size the higher oxidation rate of B{sub 4}C powder due to its larger surface area. When B{sub 4}C powder is oxidized in air, a B{sub 2}O{sub 3} glass film is formed on the surface of B{sub 4}C grain which retards the further oxidation reaction. The oxidation kinetics is approximately fitted to the diffusion-controlled rate law which can be described by the Jander's equation. The apparent activation energy for the fine-, medium- and coarse-B{sub 4}C powders is 209.4 {+-} 11.4, 212.7 {+-} 35.8 and 219.2 {+-} 45.3 kJ mol{sup -1}, respectively, slightly varying with the impurity content of B{sub 4}C powders. The type of rate law suggests that the diffusion of oxygen through the oxide layer is the rate-limiting step in the oxidation reactions. In addition, the change in the oxidation process at higher oxidation fraction might associate with the B{sub 2}O{sub 3} volatilization at higher temperatures.

  6. Novel Manufacturing Process for Unique Mixed Carbide Refractory Composites Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This STTR Phase I project will establish the feasibility of an innovative manufacturing process to fabricate a range of unique hafnium/silicon based carbide...

  7. Stereological Analysis of Carbides in Hypoeutectic Chromium Cast Iron

    Directory of Open Access Journals (Sweden)

    Gromczyk M.

    2015-06-01

    Full Text Available The results of research on stereological parameters of carbides in modified hypoeutectic chromium cast iron were shown in the paper. The effect of distance the casting heat centre of casting to the carbide phase morphology was examined. The samples for metallographic examination were taken from various locations of the model casting prepared in a special tester. This model casting was designed to simulate the solidification of heavy castings. Using the proposed methodology the relation of the distance from the model mould and the size, perimeter, length, width and the shape factor of carbides was examined. During the analysis, the values of stereological parameters of carbides changed on various sections of the model casting.

  8. Exploring a novel approach to fabricate vanadium carbide ...

    Indian Academy of Sciences (India)

    -shell structure; composite materials; mesoporous material; solid-state reaction. ... A novel approach to the fabrication of vanadium carbide encapsulated into carbon nanotube (VC@C) core-shell structured composite by thermal treatment with ...

  9. Process for preparing fine-grain metal carbide powder

    Science.gov (United States)

    Kennedy, C.R.; Jeffers, F.P.

    Fine-grain metal carbide powder suitable for use in the fabrication of heat resistant products is prepared by coating bituminous pitch on SiO/sub 2/ or Ta/sub 2/O/sub 5/ particles, heating the coated particles to convert the bituminous pitch to coke, and then heating the particles to a higher temperature to convert the particles to a carbide by reaction of said coke therewith.

  10. Stability of MC Carbide Particles Size in Creep Resisting Steels

    Directory of Open Access Journals (Sweden)

    Vodopivec, F.

    2006-01-01

    Full Text Available Theoretical analysis of the dependence microstructure creep rate. Discussion on the effects of carbide particles size and their distribution on the base of accelerated creep tests on a steel X20CrMoV121 tempered at 800 °C. Analysis of the stability of carbide particles size in terms of free energy of formation of the compound. Explanation of the different effect of VC and NbC particles on accelerated creep rate.

  11. Bainite obtaining in cast iron with carbides castings

    Directory of Open Access Journals (Sweden)

    S. Pietrowski

    2010-01-01

    Full Text Available In these paper the possibility of upper and lower bainite obtaining in cast iron with carbides castings are presented. Conditions, when in cast iron with carbides castings during continuous free air cooling austenite transformation to upper bainite or its mixture with lower bainte proceeds, have been given. A mechanism of this transformation has been given, Si, Ni, Mn and Mo distribution in the eutectic cell has been tested and hardness of tested castings has been determined.

  12. Microwave Sintering and Its Application on Cemented Carbides

    OpenAIRE

    Rumman Md Raihanuzzaman; Lee Chang Chuan; Zonghan Xie; Reza Ghomashchi

    2015-01-01

    Cemented carbides, owing to their excellent mechanical properties, have been of immense interest in the field of hard materials for the past few decades. A number of processing techniques have been developed to obtain high quality carbide tools, with a wide range of grain size depending on the application and requirements. Microwave sintering is one of the heating processes, which has been used to prepare a wide range of materials including ceramics. A deep understanding ...

  13. Neutron and Charged-Particle Induced Cross Sections for Radiochemistry in the Region of Samarium, Europium, and Gadolinium

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, R D; Kelley, K; Dietrich, F S; Bauer, R; Mustafa, M

    2004-11-30

    We have developed a set of modeled nuclear reaction cross sections for use in radiochemical diagnostics. Systematics for the input parameters required by the Hauser-Feshbach statistical model were developed and used to calculate neutron and proton induced nuclear reaction cross sections in the mass region of samarium, europium and gadolinium (62 {le} Z {le} 64, 82 {le} N {le} 96).

  14. Colloidal europium nanoparticles via a solvated metal atom dispersion approach and their surface enhanced Raman scattering studies.

    Science.gov (United States)

    Urumese, Ancila; Jenjeti, Ramesh Naidu; Sampath, S; Jagirdar, Balaji R

    2016-08-15

    Chemistry of lanthanide metals in their zerovalent state at the nanoscale remains unexplored due to the high chemical reactivity and difficulty in synthesizing nanoparticles by conventional reduction methods. In the present study, europium(0) nanoparticles, the most reactive of all the rare earth metals have been synthesized by solvated metal atom dispersion (SMAD) method using hexadecyl amine as the capping agent. The as-prepared europium nanoparticles show surface Plasmon resonance (SPR) band in the visible region of the electromagnetic spectrum. This lead to the investigation of its surface enhanced Raman scattering (SERS) using visible light excitation source. The SERS activity of europium nanoparticles has been followed using 4-aminothiophenol and biologically important molecules such as hemoglobin and Cyt-c as the analytes. This is the first example of lanthanide metal nanoparticles as SERS substrate which can possibly be extended to other rare-earth metals. Since hemoglobin absorbs in the visible region, the use of visible light excitation source leads to surface enhanced resonance Raman spectroscopy (SERRS). The interaction of biomolecules with Eu(0) has been followed using FT-IR and UV-visible spectroscopy techniques. The results indicate that there is no major irreversible change in the structure of biomolecules upon interaction with europium nanoparticles. Copyright © 2016 Elsevier Inc. All rights reserved.

  15. Rapid screening of oxytetracycline residue in catfish muscle by dispersive liquid-liquid microextraction and europium-sensitized luminescence

    Science.gov (United States)

    Oxytetracycline (OTC) residue in catfish muscle was screened by dispersive liquid-liquid microextraction (DLLME) and europium-sensitized luminescence (ESL). After extraction in EDTA, HCl, and acetonitrile, cleanup was carried out by DLLME, and ESL was measured at microgram = 385 nm and wavelength = ...

  16. Luminescence variations in europium-doped silicon-substituted hydroxyapatite nanobiophosphor via three different methods

    Energy Technology Data Exchange (ETDEWEB)

    Thang, Cao Xuan; Pham, Vuong-Hung, E-mail: vuong.phamhung@hust.edu.vn

    2015-07-15

    Highlights: • Europium doped silicon-substituted hydroxyapatite was synthesized by wet chemical synthesis method. • Morphology of nanoparticles depended on the synthesized method. • Photoluminescence intensity of the sample increases with the increasing of Si substitutions, Eu dopants and thermal annealing. - Abstract: This paper reports the first attempt for the synthesis of europium-doped Si-substituted hydroxyapatite (HA) nanostructure to achieve strong and stable luminescence of nanobiophosphor, particularly, by addition of different Eu dopants, Si substitutions, and application of optimum annealing temperatures of up to 1000 °C. The nanobiophosphor was synthesized by the coprecipitation, microwave, and hydrothermal methods. The nanoparticles demonstrated a nanowire to a spindle-like morphology, which was dependent on the method of synthesis. The photoluminescence (PL) intensity of the sample increases with the increase in Si substitutions and Eu dopants. The luminescent nanoparticles also showed the typical luminescence of Eu{sup 3+} centered at 610 nm, which was more efficient for the annealed Eu-doped Si-HA nanoparticles than for the as-synthesized nanoparticles. Among the different synthesis methods, the hydrothermal method reveals the best light emission represented by high PL intensity and narrow PL spectra. These results suggest the potential application of Eu-doped Si-HA in stable and biocompatible nanophosphors for light emission and nanomedicine.

  17. Resonance ionization spectroscopy of Europium The first application of the PISA at ISOLDE-RILIS

    CERN Document Server

    AUTHOR|(CDS)2099873; Marsh, Bruce Alan

    The following work has been carried out at the radioactive ion beam facility ISOLDE at CERN. A compact atomic beam unit named PISA (Photo Ionization Spectroscopy Apparatus) has been implemented as a recent addition to the laboratory of the Resonance Ionization Laser Ion Source (RILIS). The scope of this thesis work was to demonstrate different applications of the PISA, using the existing and highly developed laser setup of the RILIS installation. In a demonstration of the suitability of PISA for ionization scheme development, a new ionization scheme for Europium has been developed. This resulted in the observation of several new autoionizing states and Rydberg series. Through the analysis of the observed Rydberg resonances a refined value of $45734.33(3)(3)$ cm$^{-1}$ for the ionization potential of the europium atom has been determined. In addition this thesis reports on the feasibility of the use of the PISA as a RILIS performance monitoring device during laser ion source operations. Finally the present wor...

  18. Structural and electrical properties of the europium-doped indium zinc oxide thin film transistors

    Energy Technology Data Exchange (ETDEWEB)

    Ting, Chu-Chi, E-mail: ccting@ccu.edu.tw [Graduate Institute of Opto-Mechatronics Engineering, National Chung Cheng University, 168 University Rd., Min-Hsiung, Chia-Yi, Taiwan, ROC (China); Advanced Institute for Manufacturing with High-Tech Innovations, National Chung Cheng University, 168 University Rd., Min-Hsiung, Chia-Yi, Taiwan, ROC (China); Li, Wei-Yang; Wang, Ching-Hua; Yong, Hua-En [Graduate Institute of Opto-Mechatronics Engineering, National Chung Cheng University, 168 University Rd., Min-Hsiung, Chia-Yi, Taiwan, ROC (China)

    2014-07-01

    The EuInZnO (EIZO) thin film transistor (TFT) devices were fabricated by the sol–gel spin-coating technique. The EIZO TFT operates in the n-channel depletion mode and exhibits a well-defined pinch-off and saturation region. Because europium ion possesses lower electronegativity (1.2) and standard electrode potential (− 1.991 V), it can act as the carrier suppressor to reduce the carrier concentrations of the IZO (In:Zn = 1:1) thin film. Eu{sup 3+} (13 mol%)-doped IZO TFT possesses the optimum performance, and its field-effect mobility in the saturated regime, threshold voltage, on–off ratio, and S-factor are 1.23 cm{sup 2}/Vs, 3.28 V, 1.07 × 10{sup 6}, and 2.28 V/decade, respectively. - Highlights: • Europium ions can act as the carrier suppressor in the InZnO system. • The EuInZnO forms an n-channel material for the thin film transistor (TFT) device. • The optimum performance of the EuInZnO TFT is the sample with 13 mol% Eu{sup 3+} doping.

  19. Europium phosphomolybdate and osmium metallopolymer multi-functional LbL films: redox and electrocatalytic properties.

    Science.gov (United States)

    Fernandes, Diana M; Vos, Johannes G; Freire, Cristina

    2014-04-15

    Hybrid multilayer films composed by osmium metallopolymer [Os(bpy)2(PVP)10Cl]Cl (Os-poly) and europium phosphomolybdate, K₁₁[Eu(III)(PMo₁₁O₃₉)₂] (Eu(PMo11)2), were prepared using the electrostatic layer-by-layer (LbL) self-assembly method. The film build-up, monitored by electronic spectroscopy, showed a regular stepwise growth indicating a strong interaction between layers. The XPS measurements corroborated the successful fabrication of the hybrid films with the Os-poly/Eu(PMo11)2 composition. SEM images revealed a completely covered surface with a highly roughened texture. Electrochemical characterisation of films by cyclic voltammetry revealed three Mo-based reduction processes (Mo(VI)→Mo(V)) in the potential range between -0.4 and 0.1 V and one Os reduction process (Os(III)→Os(II)) at ≈0.270 V. The cyclic voltammograms of two electroactive probes, [Fe(CN)₆](3-/4-) and [Ru(NH₃)₆](3+/2+) on {Os-poly/Eu(PMo11)2}n modified electrodes revealed redox mediation between film and the probes. Furthermore, the {Os-poly/Eu(PMo11)2}n multilayer films also showed excellent Mo-based electrocatalytic activity towards reduction of nitrite and iodate, confirming the multi-functional properties of the hybrid europium phosphomolybdate - osmium metallopolymer LbL films. Copyright © 2014 Elsevier Inc. All rights reserved.

  20. Theoretical spectroscopic study of the conjugate microcystin-LR-europium cryptate

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Julio G.; Dutra, Jose Diogo L.; Costa Junior, Nivan B. da; Freire, Ricardo O., E-mail: rfreire@ufs.br [Universidade Federal de Sergipe (UFS), Sao Cristovao, SE (Brazil). Departamento de Quimica; Alves Junior, Severino; Sa, Gilberto F. de [Universidade Federal de Pernambuco (UFPE), Recife, PE (Brazil). Departamento de Quimica Fundamental

    2013-02-15

    In this work, theoretical tools were used to study spectroscopic properties of the conjugate microcystin-LR-europium cryptate. The Sparkle/AM1 model was applied to predict the geometry of the system and the INDO/S-CIS model was used to calculate the excited state energies. Based on the Judd-Ofelt theory, the intensity parameters were predicted and a theoretical model based on the theory of the 4f-4f transitions was applied to calculate energy transfer and backtransfer rates, radiative and non-radiative decay rates, quantum efficiency and quantum yield. A detailed study of the luminescent properties of the conjugate Microcystin-LR-europium cryptate was carried out. The results show that the theoretical quantum yield of luminescence of 23% is in good agreement with the experimental value published. This fact suggests that this theoretical protocol can be used to design new systems in order to improve their luminescence properties. The results suggest that this luminescent system may be a good conjugate for using in assay ELISA for detection by luminescence of the Microcystin-LR in water. (author)

  1. pH-controlled delivery of luminescent europium coated nanoparticles into platelets

    Science.gov (United States)

    Davies, Amy; Lewis, David J.; Watson, Stephen P.; Thomas, Steven G.; Pikramenou, Zoe

    2012-01-01

    Water soluble, luminescent gold nanoparticles are delivered into human platelets via a rapid, pH-controlled mechanism using a pH low insertion peptide, pHLIP. The approach introduces cocoating of gold nanoparticles with a europium luminescent complex, EuL and the pHLIP peptide to give pHLIP•EuL•Au. The 13-nm diameter gold nanoparticles act as a scaffold for the attachment of both the luminescent probe and the peptide to target delivery. Their size allows delivery of approximately 640 lanthanide probes per nanoparticle to be internalized in human platelets, which are not susceptible to transfection or microinjection. The internalization of pHLIP•EuL•Au in platelets, which takes just minutes, was studied with a variety of imaging modalities including luminescence, confocal reflection, and transmission electron microscopy. The results show that pHLIP•EuL•Au only enters the platelets in low pH conditions, pH 6.5, mediated by the pHLIP translocation across the membrane, and not at pH 7.4. Luminescence microscopy images of the treated platelets show clearly the red luminescence signal from the europium probe and confocal reflection microscopy confirms the presence of the gold particles. Furthermore, transmission electron microscopy gives a detailed insight of the internalization and spatial localization of the gold nanoparticles in the platelets. Thus, we demonstrate the potential of the design to translocate multimodal nanoparticle probes into cells in a pH dependent manner. PMID:22308346

  2. Analysis of metal surfaces coated with europium-doped titanium dioxide by laser induced breakdown spectroscopy.

    Science.gov (United States)

    Głogocka, Daria; Noculak, Agnieszka; Pucińska, Joanna; Jopek, Wojciech; Podbielska, Halina; Langner, Marek; Przybyło, Magdalena

    2015-01-01

    The surface passivation with titanium sol-gel coatings is a frequently used technique to control the adsorption of selected biological macromolecules and to reduce the exposure of the bulk material to biological matter. Due to the increasing number of new coating-preparation methods and new gel compositions with various types of additives, the quality and homogeneity determination of the surface covering is a critical factor affecting performance of any implanted material. While coating thickness is easy to determine, the homogeneity of the surface distribution of coating materials requires more elaborate methodologies. In the paper, the laser induced breakdown spectroscopy (LIBS) based method, capable to quantitate the homogeneity and uniformity of the europium in titanium dioxide sol-gel coatings on stainless steel surfaces prepared with two different procedures: spin-coating and dip-coating, is presented. The emission intensity of titanium has been used to determine the coating thickness whereas the relative values of europium and titanium emission intensities provide data on the coating homogeneity. The obtained results show that the spin-coating technique provides better surface coverage with titanium dioxide. However, when the surface coating compositions were compared the dip-coating technique was more reliable.

  3. Europium(III) Macrocyclic Complexes with Alcohol Pendant Groups as Chemical Exchange Saturation Transfer Agents

    Science.gov (United States)

    Woods, Mark; Woessner, Donald E.; Zhao, Piyu; Pasha, Azhar; Yang, Meng-Yin; Huang, Ching-Hui; Vasalitiy, Olga; Morrow, Janet R.; Sherry, A. Dean

    2009-01-01

    Paramagnetic lanthanide(III) complexes that contain hyperfine-shifted exchangeable protons offer considerable advantages over diamagnetic molecules as chemical exchange saturation transfer (CEST) agents for MRI. As part of a program to investigate avenues to improve the sensitivity of such agents, the CEST characteristics of europium(III) macrocyclic complexes having appended hydroxyethyl groups were investigated. The CEST spectrum of the asymmetrical complex, EuCNPHC3+, shows five distinct peaks for each magnetically nonequivalent exchangeable proton in the molecule. The CEST spectra of this complex were fitted to NMR Bloch theory to yield exchange rates between each of six exchanging proton pools (five on the agent plus bulk water). Exchange between the Eu3+-bound hydroxyl protons and bulk water protons was slow in dry acetonitrile but accelerated incrementally upon stepwise addition of water. In pure water, exchange was too fast to observe a CEST effect. The utility of this class of europium(III) complex for CEST imaging applications is ultimately limited by the small chemical shifts induced by the hydroxyl-appended ligands of this type and the resulting small Δω values for the exchangeable hydroxyl protons. PMID:16881645

  4. Red light emission from europium doped zinc sodium bismuth borate glasses

    Science.gov (United States)

    Hegde, Vinod; Viswanath, C. S. Dwaraka; Upadhyaya, Vyasa; Mahato, K. K.; Kamath, Sudha D.

    2017-12-01

    Zinc sodium bismuth borate (ZNBB) glasses doped with different concentrations of europium were prepared by conventional melt quenching method and characterized through the measurements of density, refractive index, X-ray diffraction (XRD), Fourier Transform Infrared (FTIR) spectra, optical absorption, luminescence and radiative lifetimes. FTIR spectra showed seven characteristic peaks of bismuth and borate functional groups in the range of 400-1600 cm-1. The optical band gap and bonding parameters have been calculated from absorption spectra. Photoluminescence spectra recorded in the visible region with 394 nm excitation are used to calculate the Judd-Ofelt (JO) intensity parameters (Ω2 and Ω4). The JO intensity parameters have been used to calculate the radiative parameters such as branching ratio (β), stimulated emission cross-section (σse), transition probability (A) for the fluorescent level of 5D0→7F2. Decay rates through single exponential are used to calculate the lifetime (τm) of the meta-stable state 5D0 of (Eu3+ ion) these glasses. The radiative parameters measured for all these glasses show 0.7 mol% europium doped zinc sodium bismuth borate glass 5D0→7F2 transition has the potential for red laser applications. The quality of the colour emitted by the present glasses are estimated quantitatively by CIE chromaticity coordinates, which confirms the suitability of these glasses as a red emitting material for field emission technologies and LEDs.

  5. Samarium-153 EDTMP for metastatic bone pain palliation: the impact of europium impurities.

    Science.gov (United States)

    Kalef-Ezra, J A; Valakis, S T; Pallada, S

    2015-02-01

    To evaluate the impact on the radiation protection policies of the radiocontaminants in Samarium-153 ethylenediamine tetramethylene phosphonate ((153)Sm-EDTMP). The internal contamination of patients treated with (153)Sm-EDMTP for palliation of painful disseminated multiple bone metastases due to long-lived impurities was assessed by direct measurements. These measurements were coupled with dose-rate measurements close to their bodies and spectroscopic analysis of the residual activity in post-treatment radiopharmaceutical vials. Whole-body counting carried out in six patients showed a 30-81-kBq europium -152 plus europium-154 contamination. The 0.85 mean (152)Eu- to -(154)Eu activity ratio obtained by direct counting was similar to that assessed by analysis of post-treatment residual activities in twelve radiopharmaceutical vials following radiopharmaceutical injection. The long-lived radiocontaminants in the patient's bodies and the treatment wastes require modifications of the applicable radiation protection policies. Copyright © 2014 Associazione Italiana di Fisica Medica. Published by Elsevier Ltd. All rights reserved.

  6. Induced Europium Circularly Polarized Luminescence Monitors Reversible Drug Binding to Native α1 -Acid Glycoprotein.

    Science.gov (United States)

    Jennings, Laura; Waters, Ryan S; Pal, Robert; Parker, David

    2017-02-03

    Alpha-1-acid glycoprotein (α1 -AGP) is an important blood plasma glycoprotein. Following an acute-phase reaction such as stress, inflammation, burn, or infection, the bloodstream concentration of α1 -AGP can increase up to 400 % of its normal concentration. A wide range of drugs is known to bind α1 -AGP. Increased binding of pharmacologically active compounds to α1 -AGP moderates their clinical effect by decreasing the amount of unbound drug in the bloodstream. This has important clinical ramifications for such applications as the duration of anesthesia and in determining dosage for drug therapy. In this study, the competitive binding to α1 -AGP of a dynamically racemic europium(III) complex with seven pharmacologically active drugs absorbing in the range λ 250-290 nm was monitored by following changes in europium total emission and in induced circularly polarized luminescence (CPL). Binding affinities corresponding to Kd values in the range 0.5-100 μm were measured, in good agreement with published data. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Europium-doped amorphous calcium phosphate porous nanospheres: preparation and application as luminescent drug carriers

    Directory of Open Access Journals (Sweden)

    Zhang Kui-Hua

    2011-01-01

    Full Text Available Abstract Calcium phosphate is the most important inorganic constituent of biological tissues, and synthetic calcium phosphate has been widely used as biomaterials. In this study, a facile method has been developed for the fabrication of amorphous calcium phosphate (ACP/polylactide-block-monomethoxy(polyethyleneglycol hybrid nanoparticles and ACP porous nanospheres. Europium-doping is performed to enable photoluminescence (PL function of ACP porous nanospheres. A high specific surface area of the europium-doped ACP (Eu3+:ACP porous nanospheres is achieved (126.7 m2/g. PL properties of Eu3+:ACP porous nanospheres are investigated, and the most intense peak at 612 nm is observed at 5 mol% Eu3+ doping. In vitro cytotoxicity experiments indicate that the as-prepared Eu3+:ACP porous nanospheres are biocompatible. In vitro drug release experiments indicate that the ibuprofen-loaded Eu3+:ACP porous nanospheres show a slow and sustained drug release in simulated body fluid. We have found that the cumulative amount of released drug has a linear relationship with the natural logarithm of release time (ln(t. The Eu3+:ACP porous nanospheres are bioactive, and can transform to hydroxyapatite during drug release. The PL properties of drug-loaded nanocarriers before and after drug release are also investigated.

  8. Development and Evaluation of Mixed Uranium-Refractory Carbide/Refractory Carbide Cer-Cer Fuels Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this proposal a new carbide-based fuel is introduced with outstanding potential to eliminate the loss of uranium, minimizes the loss of uranium, and retains...

  9. Carbides and possible hydrogen irreversible trapping sites in ultrahigh strength round steel.

    Science.gov (United States)

    Cheng, X Y; Li, H; Cheng, X B

    2017-12-01

    The carbides in ultrahigh strength round steel have been investigated by using laser-assisted atom probe tomography (APT) and high resolution transmission electron microscopy (HRTEM) in this paper. Two kinds of carbides are found and one is iron carbide M6C, where carbide formation elements Cr, Mn and Mo replace partial Fe, while the other is niobium carbide MC, where M includes V and Mo besides Nb. These two carbides, due to their different evaporation field, have various densities in reconstructed image of APT. After correction, the hydrogen content within these two carbides illustrates that M6C cannot trap hydrogen, while MC can. The different behaviors in trapping hydrogen between these two carbides may result from elements Fe or Cr in M6C carbide having weaker affinity for hydrogen than Nb and V have in MC. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. "Rigid" Luminescent Soft Materials: Europium-Containing Lyotropic Liquid Crystals Based on Polyoxyethylene Phytosterols and Ionic Liquids.

    Science.gov (United States)

    Yi, Sijing; Wang, Jiao; Feng, Zhenyu; Chen, Xiao

    2017-10-05

    Soft materials of europium β-diketonate complexes constructed in lyotropic liquid crystals (LLCs) mediated by ionic liquids (ILs) are impressive for their excellent luminescence performance and stability. For the aim to further improve their mechanical processability and luminescent tunablility, the polyoxyethylene phytosterols (BPS-n) were introduced here as structure directing agents to prepare relatively "rigid" lamellar luminescent LLCs in 1-butyl-3-methyl-imidazolium hexafluorophosphate by doping europium β-diketonate complexes with different imidazolium counterions. As a result of the solvophobic sterol ring structure of BPS-n, the more effective isolation and confinement effects of europium complexes could be achieved. The longest fluorescence lifetime and the highest quantum efficiency reported so far for europium containing lyotropic organized soft materials were thus obtained. Changing the molecular structures of BPS-n with different oxyethylene chains or doped complexes with imidazolium counterions of different alkyl chain lengths, the spacings of lamellar LLC matrixes and position of dispersed complexes became tunable. The measured luminescent and rheological properties for such composite LLCs showed a dependence on the rigidity and isolation capability afforded by sterol molecules. It was also found that the increase of counterion alkyl chain length would weaken the LLC matrix's confinement and isolation effects and therefore exhibit the deteriorated luminescence performance. The enhanced luminescence efficiency and stability of doped BPS-n LLCs reflected the excellent segregation of europium complexes from each other and therefore the reduced self-quenching process. The obtained results here present the designability of LLC matrixes and their great potential to promote achieving the luminescence tunability of soft materials.

  11. Preparation and photoluminescence of some europium (III) ternary complexes with β-diketone and nitrogen heterocyclic ligands

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dunjia, E-mail: dunjiawang@163.com; Pi, Yan; Zheng, Chunyang; Fan, Ling; Hu, Yanjun; Wei, Xianhong

    2013-10-15

    Highlights: •Preparation of europium (III) ternary complexes with β-diketone and nitrogen heterocyclic ligands. •Photoluminescence behavior of europium (III) ternary complexes. •Analysis of the Judd–Ofelt intensity parameters (Ω{sub t}), the lifetime (τ) and the luminescent quantum yield (η). -- Abstract: Preparation and photoluminescence behavior of four new europium (III) ternary complexes with β-diketones (1-(6-methoxy-naphthalen-2-yl)-3-phenyl-propane-1,3-dione (MNPPD) and 1-(4-tert-butyl-phenyl)-3-(6-methoxy-naphthalen-2-yl)-propane-1,3-dione (BPMPD)) and 2,2-dipyridine (Bipy) or 1,10-phenanthroline (Phen) were reported, in the solid state. Complexes Eu(MPPD){sub 3}·Bipy, Eu(BMPD){sub 3}·Bipy, Eu(MPPD){sub 3}·Phen and Eu(BMPD){sub 3}·Phen were characterized by elemental analysis, FT-IR, {sup 1}H NMR, UV–vis absorption. The emission spectra show narrow emission bands that arise from the {sup 5}D{sub 0} → {sup 7}F{sub J} (J = 0–4) transitions of the europium ion. Based on the emission spectra and luminescence decay curves in solid state, the intensity parameters (Ω{sub t}), lifetime (τ) and emission quantum efficiency (η) were determined. The Ω{sub 2} values indicate that the Eu(III) ion in these complexes is in a highly polarizable chemical environment. Complexes Eu(MPPD){sub 3}·Bipy and Eu(MPPD){sub 3}·Phen showed a longer lifetime (τ) and a higher luminescence quantum efficiency (η), which indicated that the energy transfer to the europium ion from MNPPD ligand is more efficient than that from BPMPD ligand.

  12. Understanding the Irradiation Behavior of Zirconium Carbide

    Energy Technology Data Exchange (ETDEWEB)

    Motta, Arthur [Pennsylvania State Univ., University Park, PA (United States); Sridharan, Kumar [Univ. of Wisconsin, Madison, WI (United States); Morgan, Dane [Univ. of Wisconsin, Madison, WI (United States); Szlufarska, Izabela [Univ. of Wisconsin, Madison, WI (United States)

    2013-10-11

    Zirconium carbide (ZrC) is being considered for utilization in high-temperature gas-cooled reactor fuels in deep-burn TRISO fuel. Zirconium carbide possesses a cubic B1-type crystal structure with a high melting point, exceptional hardness, and good thermal and electrical conductivities. The use of ZrC as part of the TRISO fuel requires a thorough understanding of its irradiation response. However, the radiation effects on ZrC are still poorly understood. The majority of the existing research is focused on the radiation damage phenomena at higher temperatures (>450{degree}C) where many fundamental aspects of defect production and kinetics cannot be easily distinguished. Little is known about basic defect formation, clustering, and evolution of ZrC under irradiation, although some atomistic simulation and phenomenological studies have been performed. Such detailed information is needed to construct a model describing the microstructural evolution in fast-neutron irradiated materials that will be of great technological importance for the development of ZrC-based fuel. The goal of the proposed project is to gain fundamental understanding of the radiation-induced defect formation in zirconium carbide and irradiation response by using a combination of state-of-the-art experimental methods and atomistic modeling. This project will combine (1) in situ ion irradiation at a specialized facility at a national laboratory, (2) controlled temperature proton irradiation on bulk samples, and (3) atomistic modeling to gain a fundamental understanding of defect formation in ZrC. The proposed project will cover the irradiation temperatures from cryogenic temperature to as high as 800{degree}C, and dose ranges from 0.1 to 100 dpa. The examination of this wide range of temperatures and doses allows us to obtain an experimental data set that can be effectively used to exercise and benchmark the computer calculations of defect properties. Combining the examination of radiation

  13. Neutron irradiation induced amorphization of silicon carbide

    Science.gov (United States)

    Snead, L. L.; Hay, J. C.

    1999-07-01

    This paper provides the properties of bulk stoichiometric silicon carbide which has been amorphized under neutron irradiation. Both high purity single crystal hcp and high purity, highly faulted (cubic) chemically vapor deposited (CVD) SiC were irradiated at approximately 60°C to a total fast neutron fluence of 2.6 × 10 25 n/m 2. Amorphization was seen in both materials as evidenced by TEM, electron diffraction and X-ray diffraction techniques. Physical properties for the amorphized single crystal material are reported including large changes in density (-10.8%), elastic modulus as measured using a nanoindentation technique (-45%), hardness as measured by nanoindentation (-45%), and standard Vickers hardness (-24%). Similar property changes are observed for the amorphized CVD SiC. Using measured thermal conductivity data for the CVD SiC sample, the critical temperature for amorphization at this neutron dose and flux, above which amorphization is not possible, is estimated to be greater than ˜125°C.

  14. Feasibility study of fluxless brazing cemented carbides to steel

    Science.gov (United States)

    Tillmann, W.; Sievers, N.

    2017-03-01

    One of the most important brazing processes is the joints between cemented carbides and steel for the tool industry such as in rotary drill hammers or saw blades. Even though this technique has already been used for several decades, defects in the joint can still occur and lead to quality loss. Mostly, the joining process is facilitated by induction heating and the use of a flux to enhance the wetting of the filler alloy on the surface of the steel and cemented carbide in an ambient atmosphere. However, although the use of flux enables successful joining, it also generates voids within the joint, which reduces the strength of the connection while the chemicals within the flux are toxic and polluting. In this feasibility study, a fluxless brazing process is used to examine the joint between cemented carbides and steel for the first time. For this, ultrasound is applied during induction heating to enable the wetting between the liquid filler metal and the surfaces of the cemented carbide and steel. The ultrasound generates cavitations within the liquid filler metal, which remove the oxides from the surface. Several filler metals such as a silver based alloy Ag449, pure Zn, and an AlSi-alloy were used to reduce the brazing temperature and to lower the thermal residual stresses within the joint. As a result, every filler metal successfully wetted both materials and led to a dense connection. The ultrasound has to be applied carefully to prevent a damage of the cemented carbide. In this regard, it was observed that single grains of the cemented carbide broke out and remained in the joint. This positive result of brazing cemented carbides to steel without a flux but using ultrasound, allows future studies to focus on the shear strength of these joints as well as the behavior of the thermally induced residual stresses.

  15. Luminescent method of determination of composition of europium and terbium complexes in solution by change of intensity ratio of luminescence bands

    Energy Technology Data Exchange (ETDEWEB)

    Bel' tyukova, S.V.; Nazarenko, N.A.; Poluehktov, N.S.

    1982-03-01

    The complexes of europium and terbium with phenanthroline, ethylenediaminetetraacetate, nitrilotriacetate, some acids-phenol derivatives and ..beta..-diketones series have been used as an example to demonstrate that the value of the ratio of intensities on the two bands of europium(terbium) luminescence spectra - the one corresponding to the hypersensitive'' transition and the other, to the magnetic dipole one - can be used for determination of the complexes composition in solutions.

  16. Syntheses and electroluminescent properties of two europium ternary complexes Eu(DBM){sub 3}(PBO) and Eu(DBM){sub 3}(PBT)

    Energy Technology Data Exchange (ETDEWEB)

    Guan Min [State Key Laboratory of Rare Earth Materials Chemistry and Applications, Peking University, Beijing 100871 (China); Gao Lihua [Department of Chemistry, Beijing Normal University, Beijing 100875 (China); Wang Shanshan [State Key Laboratory of Rare Earth Materials Chemistry and Applications, Peking University, Beijing 100871 (China); Huang Chunhui [State Key Laboratory of Rare Earth Materials Chemistry and Applications, Peking University, Beijing 100871 (China)], E-mail: chhuang@pku.edu.cn; Wang Kezhi [Department of Chemistry, Beijing Normal University, Beijing 100875 (China)

    2007-12-15

    Two europium complexes, Eu(DBM){sub 3}(PBO) and Eu(DBM){sub 3}(PBT) (DBM=dibenzoylmethanato, PBO=2-(2-pyridyl)benzoxazole, PBT=2-(2-pyridyl)benzothiazole), were prepared and used as emitting materials in organic electroluminescent (EL) devices. The devices with the structures ITO/TPD/Eu(DBM){sub 3}(PBO) (or Eu(DBM){sub 3}(PBT)/BCP/Alq{sub 3}/Mg:Ag/Ag emit red light originating from the europium complexes.

  17. Reactions of water and C1 molecules on carbide and metal-modified carbide surfaces.

    Science.gov (United States)

    Wan, Weiming; Tackett, Brian M; Chen, Jingguang G

    2017-04-03

    The formation of carbides can significantly modify the physical and chemical properties of the parent metals. In the current review, we summarize the general trends in the reactions of water and C1 molecules over transition metal carbide (TMC) and metal-modified TMC surfaces and thin films. Although the primary focus of the current review is on the theoretical and experimental studies of reactions of C1 molecules (CO, CO2, CH3OH, etc.), the reactions of water will also be reviewed because water plays an important role in many of the C1 transformation reactions. This review is organized by discussing separately thermal reactions and electrochemical reactions, which provides insights into the application of TMCs in heterogeneous catalysis and electrocatalysis, respectively. In thermal reactions, we discuss the thermal decomposition of water and methanol, as well as the reactions of CO and CO2 over TMC surfaces. In electrochemical reactions, we summarize recent studies in the hydrogen evolution reaction, electrooxidation of methanol and CO, and electroreduction of CO2. Finally, future research opportunities and challenges associated with using TMCs as catalysts and electrocatalysts are also discussed.

  18. Stability constants of europium complexes with a nitrogen heterocycle substituted methane-1,1-diphosphonic acid

    Energy Technology Data Exchange (ETDEWEB)

    Jensen, M.P.; Rickert, P.G.; Schmidt, M.A.; Nash, K.L.

    1996-06-01

    Even in moderately acidic solutions ([H{sup +}] > 0.01 M), N-piperidinomethane-1,1-diphosphonic acid (H{sub 4}PMDPA) is a strong complexant of trivalent lanthanide ions that shows enhanced complex solubility over previously studied 1,1-diphosphonic acids. The protonation constants of PMDPA in 2.0 M H/NaClO{sub 4} were determined by potentiometric and NMR titrations, and the stability constants for formation of complexes with Eu{sup 3+} were determined by solvent extraction. Difference in protonation equilibria induced by addition of the nitrogen heterocycle results in an increase in the complexation strength of PMDPA. In solutions containing 0.1 M H{sup +} and ligand concentrations greater than 0.02 M, PMDPA is the most effective 1,1-diphosphonic acid for europium complexation studied thus far.

  19. Sorption of Europium in zirconium silicate; Sorcion de Europio en silicato de circonio

    Energy Technology Data Exchange (ETDEWEB)

    Garcia R, G. [ININ, Carretera Mexico-Toluca Km. 36.5, 52045 Estado de Mexico (Mexico)

    2004-07-01

    Some minerals have the property of sipping radioactive metals in solution, that it takes advantage to manufacture contention barriers that are placed in the repositories of nuclear wastes. The more recent investigations are focused in the development of new technologies guided to the sorption of alpha emissors on minerals which avoid their dispersion in the environment. In an effort to contribute to the understanding of this type of properties, some studies of sorption of Europium III are presented like homologous of the americium, on the surface of zirconium silicate (ZrSiO{sub 4}). In this work the results of sorption experiences are presented as well as the interpretation of the phenomena of the formation of species in the surface of the zirconium silicate. (Author)

  20. First principles description of the insulator-metal transition in europium monoxide

    KAUST Repository

    Wang, Hao

    2012-02-01

    Europium monoxide, EuO, is a ferromagnetic insulator. Its electronic structure under pressure and doping is investigated by means of density functional theory. We employ spin polarized electronic structure calculations including onsite electron-electron interaction for the localized Eu 4f and 5d electrons. Our results show that under pressure the ferromagnetism is stable, both for hydrostatic and uniaxial pressure, while the compound undergoes an insulator-metal transition. The insulator-metal transition in O deficient and Gd doped EuO is reproduced for an impurity concentration of 6.25%. A 10 monolayer thick EuO(1 0 0) thin film is predicted to be an insulator with a narrow band gap of 0.08 eV. © 2011 Elsevier B.V. All rights reserved.

  1. Development of europium doped BaSO4 TL OSL dual phosphor for radiation dosimetry applications

    Science.gov (United States)

    Patle, Anita; Patil, R. R.; Kulkarni, M. S.; Bhatt, B. C.; Moharil, S. V.

    2015-08-01

    This paper presents the results on the preparation and characterization of Europium-doped Barium sulfate (BaSO4: Eu) TL /OSL dual phosphor. The OSL sensitivity was found to be 11% of the commercially available Al2O3: C, using area integration method. The sample also shows good TL sensitivity and the dosimetric peak appears around 190°C with a shoulder at 282°C. After OSL readout, No change in the TL glow curve is observed. Since the observed TL peaks are not responsible for the observed OSL, good OSL as well as TL sensitivity and low fading will make this phosphor suitable for applications in radiation dosimetry using OSL as well as TL.

  2. Chemiluminescence determination of tetracyclines using Fenton system in the presence europium(III) ions

    Energy Technology Data Exchange (ETDEWEB)

    Kaczmarek, Malgorzata [Department of Rare Earths, Faculty of Chemistry, Adam Mickiewicz University, Grunwaldzka 6, 60 - 780 Poznan (Poland); Lis, Stefan, E-mail: blis@amu.edu.pl [Department of Rare Earths, Faculty of Chemistry, Adam Mickiewicz University, Grunwaldzka 6, 60 - 780 Poznan (Poland)

    2009-04-20

    A new simple chemiluminescent method for the determination of chlortetracycline (Chlor-TC), oxytetracycline (Oxy-TC) and doxycycline (Doxy-TC) is described. This method is based on the europium(III) emission as a result of the energy transfer process from the excited product of the tetracyclines oxidation to the uncomplexed Eu(III). Under the optimum conditions, calibration graphs were obtained for 4 x 10{sup -7} to 2 x 10{sup -5} mol L{sup -1} of Chlor-TC; 2 x 10{sup -7} to 2 x 10{sup -5} mol L{sup -1} of Oxy-TC and 1 x 10{sup -7} to 3 x 10{sup -5} mol L{sup -1} of Doxy-TC. The method was successfully applied to the determination of these drugs in pharmaceutical and veterinary formulation and honey.

  3. Europium-doped aluminum oxide phosphors as indicators for frontal polymerization dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Carranza, Arturo; Gewin, Mariah; Pojman, John A., E-mail: japojman@lsu.edu [Department of Chemistry, Louisiana State University, Baton Rouge, Louisiana 70803-1804 (United States)

    2014-06-15

    In this study, we present an inexpensive and practical method that allows the monitoring and visualization of front polymerization, propagation, and dynamics. Commercially available europium-doped aluminum oxide powders were combined with video imaging to visualize free-radical propagating polymer fronts. In order to demonstrate the applicability of this method, frontal copolymerization reactions of propoxylated glycerin triacrylate (EB53), pentaerythritol triacrylate (PETA), and pentaerythritol tetra-acrylate (PETEA) with 1,1-Bis(tert-butylperoxy)-3,3,5-trimethylcyclohexane (Luperox 231®) as an initiator were studied and compared to the results obtained by IR imaging. Systems exhibiting higher filler loading, higher EB53 content, and less acrylated monomers showed a marked decrease in front velocity, while those with more acrylated monomers and higher crosslinking density showed a marked increase in front velocity. Finally, in order to show the potential of the imaging technique, we studied fronts propagating in planar and spherical geometries.

  4. Europium-doped aluminum oxide phosphors as indicators for frontal polymerization dynamics.

    Science.gov (United States)

    Carranza, Arturo; Gewin, Mariah; Pojman, John A

    2014-06-01

    In this study, we present an inexpensive and practical method that allows the monitoring and visualization of front polymerization, propagation, and dynamics. Commercially available europium-doped aluminum oxide powders were combined with video imaging to visualize free-radical propagating polymer fronts. In order to demonstrate the applicability of this method, frontal copolymerization reactions of propoxylated glycerin triacrylate (EB53), pentaerythritol triacrylate (PETA), and pentaerythritol tetra-acrylate (PETEA) with 1,1-Bis(tert-butylperoxy)-3,3,5-trimethylcyclohexane (Luperox 231®) as an initiator were studied and compared to the results obtained by IR imaging. Systems exhibiting higher filler loading, higher EB53 content, and less acrylated monomers showed a marked decrease in front velocity, while those with more acrylated monomers and higher crosslinking density showed a marked increase in front velocity. Finally, in order to show the potential of the imaging technique, we studied fronts propagating in planar and spherical geometries.

  5. Electrochemiluminescence Study of Europium (III Complex with Coumarin3-Carboxylic Acid

    Directory of Open Access Journals (Sweden)

    Stefan Lis

    2008-01-01

    Full Text Available The europium (III complex of coumarin-3-carboxylic acid (C3CA has been prepared and characterized on the basis of elemental analysis, IR, and emission (photoluminescence and electrochemiluminescence spectroscopy. The synthesised complex having a formula Eu(C3CA2(NO3(H2O2 was photophysically characterized in solution and in the solid state. Electrochemiluminescence, ECL, of the system containing the Eu(III/C3CA complex was studied using an oxide-covered aluminium electrode. The goal of these studies was to show the possibility of the use of electrochemical excitation of the Eu(III ion in aqueous solution for emission generation. The generated ECL emission was very weak, and therefore its measurements and spectral analysis were carried out with the use of cut-off filters method. The studies proved a predominate role of the ligand-to-metal energy transfer (LMET in the generated ECL.

  6. Europium incorporated in silica matrix obtained by sol-gel: luminescent materials

    Directory of Open Access Journals (Sweden)

    Nassar Eduardo José

    2003-01-01

    Full Text Available In this work we report some aspects of the chemistry involved in the preparation of modified silicon oxide by the sol-gel process. Europium III compounds were used as luminescent probe. An organic-inorganic hybrid was obtained by hydrolysis of tetraethylorthosilicate (TEOS and 3-aminopropyltriethoxysilane (APTS. The Eu III compounds were added in different ways. In the first, silica was prepared in the presence of Eu III, and in the second, Eu III was added on the silica surface. These materials were studied by luminescence, infrared spectroscopy and termogravimetric analysis. The results obtained for the hybrid material show different behavior for Eu III emission, which could be excited by the antenna effect and the influence of the surrounding in the luminescence quenching. The thermogravimetric data present different mass loss in samples to range temperature 50 - 150 °C. Thermogravimetric and infrared spectra showed that inorganic polymers incorporated the organic part.

  7. Europium as an inhibitor of Amyloid-β(1-42) induced membrane permeation.

    Science.gov (United States)

    Williams, Thomas L; Urbanc, Brigita; Marshall, Karen E; Vadukul, Devkee M; Jenkins, A Toby A; Serpell, Louise C

    2015-10-24

    Soluble Amyloid-beta (Aβ) oligomers are a source of cytotoxicity in Alzheimer's disease (AD). The toxicity of Aβ oligomers may arise from their ability to interact with and disrupt cellular membranes mediated by GM1 ganglioside receptors within these membranes. Therefore, inhibition of Aβ-membrane interactions could provide a means of preventing the toxicity associated with Aβ. Here, using Surface Plasmon field-enhanced Fluorescence Spectroscopy, we determine that the lanthanide, Europium III chloride (Eu(3+)), strongly binds to GM1 ganglioside-containing membranes and prevents the interaction with Aβ42 leading to a loss of the peptides ability to cause membrane permeation. Here we discuss the molecular mechanism by which Eu(3+) inhibits Aβ42-membrane interactions and this may lead to protection of membrane integrity against Aβ42 induced toxicity. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  8. Radiation effects on beta /10.6/ of pure and europium doped KCl

    Science.gov (United States)

    Grimes, H. H.; Maisel, J. E.; Hartford, R. H.

    1975-01-01

    Changes in the optical absorption coefficient as the result of X-ray and electron bombardment of pure monocrystalline and polycrystalline KCl and of divalent europium doped polycrystalline KCl were determined. A constant heat flow calorimetric method was used to measure the optical absorption coefficients. Both 300 kV X-ray irradiation and 2 MeV electron irradiation produced increases in the optical absorption coefficient at room temperature. X-ray irradiation produced more significant changes in pure monocrystalline KCl than equivalent amounts of electron irradiation. Electron irradiation of pure and Eu-doped polycrystalline KCl produced increases in the absorption by as much as a factor of 20 over untreated material. Bleaching of the electron-irradiated doped KCl with 649 millimicron light produced a further increase.

  9. Excitation functions for the formation of longer lived isotopes by deuteron irradiation of Europium

    Energy Technology Data Exchange (ETDEWEB)

    Takács, S., E-mail: stakacs@atomki.hu [Institute for Nuclear Research, Hungarian Academy of Sciences, 4026 Debrecen (Hungary); Tárkányi, F. [Institute for Nuclear Research, Hungarian Academy of Sciences, 4026 Debrecen (Hungary); Hermanne, A.; Adam-Rebeles, R. [Cyclotron Laboratory, Vrije Universiteit Brussel, Brussels 1090 (Belgium); Takács, M.P. [Institute for Nuclear Research, Hungarian Academy of Sciences, 4026 Debrecen (Hungary); Institute of Physics, University of Debrecen, 4026 Debrecen (Hungary)

    2013-09-01

    Excitation functions for nuclear reactions induced on natural europium targets by energetic deuterons were studied up to 50 MeV. A standard stacked foil technique was used for irradiation and high resolution gamma spectrometry was applied for activity assessment. Direct or cumulative cross sections for reaction products with half-life longer than 2 h were determined. Reactions leading to the formation of the radionuclides {sup 147,149,151,153}Gd, {sup 147,148,149,150m,150g,152m,152g,154g}Eu, {sup 153}Sm and {sup 150}Pm were studied. In most cases no earlier data were available in the literature. The new experimental results were compared with values tabulated in the on-line TENDL2011 library.

  10. Quadrupole splitting and Eu partial lattice dynamics in europium orthophosphate EuPO {sub 4}

    Energy Technology Data Exchange (ETDEWEB)

    Klobes, B., E-mail: b.klobes@fz-juelich.de [JARA-FIT - Forschungszentrum Jülich GmbH, Jülich Centre for Neutron Science JCNS and Peter Grünberg Institute PGI (Germany); Arinicheva, Y., E-mail: y.arinicheva@fz-juelich.de; Neumeier, S., E-mail: s.neumeier@fz-juelich.de [Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK-6) Nuclear Waste Management and Reactor Safety (Germany); Simon, R. E., E-mail: r.simon@fz-juelich.de; Jafari, A., E-mail: a.jafari@fz-juelich.de [JARA-FIT - Forschungszentrum Jülich GmbH, Jülich Centre for Neutron Science JCNS and Peter Grünberg Institute PGI (Germany); Bosbach, D., E-mail: d.bosbach@fz-juelich.de [Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research (IEK-6) Nuclear Waste Management and Reactor Safety (Germany); Hermann, R. P., E-mail: hermannrp@ornl.gov [JARA-FIT - Forschungszentrum Jülich GmbH, Jülich Centre for Neutron Science JCNS and Peter Grünberg Institute PGI (Germany)

    2016-12-15

    Hyperfine interactions in europium orthophosphate EuPO{sub 4} were investigated using {sup 151}Eu Mössbauer spectroscopy from 6 to 300 K. The value of the quadrupole splitting and the asymmetry parameter were refined and further substantiated by nuclear forward scattering data obtained at room temperature. The temperature dependence of the relative absorption was modeled with an Eu specific Debye temperature of 221(1) K. Eu partial lattice dynamics were probed by means of nuclear inelastic scattering and the mean force constant, the Lamb-Mössbauer factor, the internal energy, the vibrational entropy, the average phonon group velocity were calculated using the extracted density of phonon states. In general, Eu specific vibrations are characterized by rather small phonon energies and contribute strongly to the total entropy of the system. Although there is no classical Debye like behavior at low vibrational energies, the average phonon group velocity can be reasonably approximated using a linear fit.

  11. Photoluminescent polymer electrolyte based on agar and containing europium picrate for electrochemical devices

    Energy Technology Data Exchange (ETDEWEB)

    Lima, E. [Centro de Quimica, Universidade do Minho, Gualtar, 4710-057 Braga (Portugal); Raphael, E.; Sentanin, F. [IQSC, Universidade de Sao Paulo, 13566-590 Sao Carlos, SP (Brazil); Rodrigues, L.C. [Centro de Quimica, Universidade do Minho, Gualtar, 4710-057 Braga (Portugal); Ferreira, R.A.S.; Carlos, L.D. [Departamento de Fisica, CICECO, Universidade de Aveiro, 3810-193 Aveiro (Portugal); Silva, M.M., E-mail: nini@quimica.uminho.pt [Centro de Quimica, Universidade do Minho, Gualtar, 4710-057 Braga (Portugal); Pawlicka, A. [IQSC, Universidade de Sao Paulo, 13566-590 Sao Carlos, SP (Brazil)

    2012-04-15

    Highlights: Black-Right-Pointing-Pointer We prepared ionic conducting membranes for the specific requirements of the device. Black-Right-Pointing-Pointer Luminescent reporter groups, with many applications in biotechnology. Black-Right-Pointing-Pointer Thermal and electrochemical stability of electrolytes is adequate for application. - Abstract: Dispersion of photoluminescent rare earth metal complexes in polymer matrices is of great interest due to the possibility of avoiding the saturation of the photoluminescent signal. The possibility of using a natural ionic conducting polymer matrix was investigated in this study. Samples of agar-based electrolytes containing europium picrate were prepared and characterized by physical and chemical analyses. The FTIR spectra indicated strong interaction of agar O-H and 3,6-anhydro-galactose C-O groups with glycerol and europium picrate. The DSC analyses revealed no glass transition temperature of the samples in the -60 to 250 Degree-Sign C range. From the thermogravimetry (TG), a thermal stability of the samples of up to 180 Degree-Sign C was stated. The membranes were subjected to ionic conductivity measurement, which provided the values of 2.6 Multiplication-Sign 10{sup -6} S/cm for the samples with acetic acid and 1.6 Multiplication-Sign 10{sup -5} S/cm for the samples without acetic acid. Moreover, the temperature-dependent ionic conductivity measurements revealed both Arrhenius and VTF models of the conductivity depending on the sample. Surface visualization through scanning electron microscopy (SEM) demonstrated good uniformity. The samples were also applied in small electrochromic devices and showed good electrochemical stability. The present work confirmed that these materials may perform as satisfactory multifunctional component layers in the field of electrochemical devices.

  12. Spectroscopic investigation on europium doped heavy metal borate glasses for red luminescent application

    Energy Technology Data Exchange (ETDEWEB)

    Hegde, Vinod; Wagh, Akshatha; Kamath, Sudha D. [Manipal University, Department of Physics, Manipal Institute of Technology, Manipal (India); Hegde, Hemanth [Manipal University, Department of Chemistry, Manipal Institute of Technology, Manipal (India); Vishwanath, C.S.D. [Sri Venkateswara University, Department of Physics, Tirupati (India)

    2017-05-15

    The present study explores a new borate family glasses based on 10ZnO-5Na{sub 2}O-10Bi{sub 2}O{sub 3}-(75 - x) B{sub 2}O{sub 3}-xEu{sub 2}O{sub 3} (x = 0, 0.1, 0.5, 1, 1.5, 2, 3 mol%) composition, synthesized by rapid melt quench technique. Prepared glasses were subjected to the density and refractive index measurements and their values were used to calculate other physical properties of the glass matrix as a function of Eu{sup 3+} concentration. XRD confirmed amorphous nature of the glasses. FTIR spectra in the absorption mode were recorded in the 400-4000 cm{sup -1} region to identify different functional groups in the glass matrix. Deconvoluted FTIR spectra showed increase in BO{sub 4} units with rise in europium content which confirmed the 'network strengthener' role of europium ions by creating bridging oxygens (BOs). Optical properties were investigated for their luminescence behavior through various spectroscopic techniques such as UV-Vis-NIR absorption, excitation, emission, decay profiles, and color measurements at room temperature. Lasing properties of the glasses like total radiative life time, branching ratio, emission cross section, and optical gain were obtained from the calculated Judd-Ofelt (Ω{sub 2},Ω{sub 4}) intensity parameters. From the measured values of emission, cross sections, branching ratios, life times, strong photoluminescence features, and CIE chromaticity coordinates, 0.5 mol% of Eu{sup 3+} ions doped ZnNaBiB glasses showed optimum performance and are potential candidate for red light generation at 613 nm. (orig.)

  13. Europium nanoparticle-based high performing immunoassay for the screening of treponemal antibodies.

    Directory of Open Access Journals (Sweden)

    Sheikh M Talha

    Full Text Available Treponema pallidum subspecies pallidum (Tp is the causative agent of syphilis which mainly spreads through sexual contact, blood transfusion and perinatal route. In order to curtail the spread of the infection and to clinically manage the disease, timely, accurate and reliable diagnosis is very important. We have developed an immunoassay for the detection of treponemal antibodies in human serum or plasma samples. In vivo biotinylated and non-biotinylated versions of the recombinant antigen were designed by the fusion of three Tp-specific antigens namely Tp15, Tp17 and Tp47. These fusion antigens were expressed in E. coli and purified using single-step metal affinity chromatography. Biotinylated fusion antigen immobilized on streptavidin coated plate was used to capture the treponemal antibodies and the non-biotinylated antigen coated on europium nanoparticles was used as tracer. Assays with two different incubation times of 10 min and 1 h were developed, and following the incubation the europium fluorescence was measured using time-resolved fluorometry. The developed time-resolved fluorometric (TRF immunoassays were evaluated with in-house and commercial serum/plasma sample panels. For well-established treponemal antibodies positive or negative samples, the sensitivity of TRF immunoassay with 10 min incubation time was 97.4%, and of TRF immunoassay with 1 h incubation time was 98.7%, and the specificities of both the TRF immunoassays were 99.2%. For the samples with discordant results with the reference assays, both the TRF immunoassays showed better specificity than the Enzygnost syphilis enzyme immunoassay as a screening test. The two different incubation times did not have any significant effect on the signal to cutoff (S/Co ratios obtained with the two immunoassays (p=0.06. Our results indicate that the developed immunoassay with a short incubation time of 10 min has the potential to be used in clinical laboratories and in blood

  14. Visible-light-excited and europium-emissive nanoparticles for highly-luminescent bioimaging in vivo.

    Science.gov (United States)

    Wu, Yongquan; Shi, Mei; Zhao, Lingzhi; Feng, Wei; Li, Fuyou; Huang, Chunhui

    2014-07-01

    Europium(III)-based material showing special milliseconds photoluminescence lifetime has been considered as an ideal time-gated luminescence probe for bioimaging, but is still limited in application in luminescent small-animal bioimaging in vivo. Here, a water-soluble, stable, highly-luminescent nanosystem, Ir-Eu-MSN (MSN = mesoporous silica nanoparticles, Ir-Eu = [Ir(dfppy)2(pic-OH)]3Eu·2H2O, dfppy = 2-(2,4-difluorophenyl)pyridine, pic-OH = 3-hydroxy-2-carboxypyridine), was developed by an in situ coordination reaction to form an insoluble dinuclear iridium(III) complex-sensitized-europium(III) emissive complex within mesoporous silica nanoparticles (MSNs) which had high loading efficiency. Compared with the usual approach of physical adsorption, this in-situ reaction strategy provided 20-fold the loading efficiency (43.2%) of the insoluble Ir-Eu complex in MSNs. These nanoparticles in solid state showed bright red luminescence with high quantum yield of 55.2%, and the excitation window extended up to 470 nm. These Ir-Eu-MSN nanoparticles were used for luminescence imaging in living cells under excitation at 458 nm with confocal microscopy, which was confirmed by flow cytometry. Furthermore, the Ir-Eu-MSN nanoparticles were successfully applied into high-contrast luminescent lymphatic imaging in vivo under low power density excitation of 5 mW cm(-2). This synthetic method provides a universal strategy of combining hydrophobic complexes with hydrophilic MSNs for in vivo bioimaging. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Europium Nanoparticle-Based High Performing Immunoassay for the Screening of Treponemal Antibodies

    Science.gov (United States)

    Talha, Sheikh M.; Hytönen, Jukka; Westhorpe, Adam; Kumar, Sushil; Khanna, Navin; Pettersson, Kim

    2013-01-01

    Treponema pallidum subspecies pallidum (Tp) is the causative agent of syphilis which mainly spreads through sexual contact, blood transfusion and perinatal route. In order to curtail the spread of the infection and to clinically manage the disease, timely, accurate and reliable diagnosis is very important. We have developed an immunoassay for the detection of treponemal antibodies in human serum or plasma samples. In vivo biotinylated and non-biotinylated versions of the recombinant antigen were designed by the fusion of three Tp-specific antigens namely Tp15, Tp17 and Tp47. These fusion antigens were expressed in E. coli and purified using single-step metal affinity chromatography. Biotinylated fusion antigen immobilized on streptavidin coated plate was used to capture the treponemal antibodies and the non-biotinylated antigen coated on europium nanoparticles was used as tracer. Assays with two different incubation times of 10 min and 1 h were developed, and following the incubation the europium fluorescence was measured using time-resolved fluorometry. The developed time-resolved fluorometric (TRF) immunoassays were evaluated with in-house and commercial serum/plasma sample panels. For well-established treponemal antibodies positive or negative samples, the sensitivity of TRF immunoassay with 10 min incubation time was 97.4%, and of TRF immunoassay with 1 h incubation time was 98.7%, and the specificities of both the TRF immunoassays were 99.2%. For the samples with discordant results with the reference assays, both the TRF immunoassays showed better specificity than the Enzygnost syphilis enzyme immunoassay as a screening test. The two different incubation times did not have any significant effect on the signal to cutoff (S/Co) ratios obtained with the two immunoassays (p = 0.06). Our results indicate that the developed immunoassay with a short incubation time of 10 min has the potential to be used in clinical laboratories and in blood-bank settings as a

  16. Semiconducting polymer encapsulated mesoporous silica particles with conjugated Europium complexes: toward enhanced luminescence under aqueous conditions.

    Science.gov (United States)

    Zhang, Jixi; Prabhakar, Neeraj; Näreoja, Tuomas; Rosenholm, Jessica M

    2014-01-01

    Immobilization of lanthanide organic complexes in meso-organized hybrid materials for luminescence applications have attracted immense interest due to the possibility of controlled segregation at the nanoscopic level for novel optical properties. Aimed at enhancing the luminescence intensity and stability of the hybrid materials in aqueous media, we developed polyvinylpyrrolidone (PVP) stabilized, semiconducting polymer (poly(9-vinylcarbazole), PVK) encapsulated mesoporous silica hybrid particles grafted with Europium(III) complexes. Monosilylated β-diketonate ligands (1-(2-naphthoyl)-3,3,3-trifluoroacetonate, NTA) were first co-condensed in the mesoporous silica particles as pendent groups for bridging and anchoring the lanthanide complexes, resulting in particles with an mean diameter of ∼ 450 nm and a bimodal pore size distribution centered at 3.5 and 5.3 nm. PVK was encapsulated on the resulted particles by a solvent-induced surface precipitation process, in order to seal the mesopores and protect Europium ions from luminescence quenching by producing a hydrophobic environment. The obtained polymer encapsulated MSN-EuLC@PVK-PVP particles exhibit significantly higher intrinsic quantum yield (Φ(Ln) = 39%) and longer lifetime (τ(obs) = 0.51 ms), as compared with those without polymer encapsulation. Most importantly, a high luminescence stability was realized when MSN-EuLC@PVK-PVP particles were dispersed in various aqueous media, showing no noticeable quenching effect. The beneficial features and positive attributes of both mesoporous silica and semiconducting polymers as lanthanide-complex host were merged in a single hybrid carrier, opening up the possibility of using these hybrid luminescent materials under complex aqueous conditions such as biological/physiological environments.

  17. Surface-imprinted nanofilaments for europium-amplified luminescent detection of fluoroquinolone antibiotics.

    Science.gov (United States)

    Zdunek, Jolanta; Benito-Peña, Elena; Linares, Ana; Falcimaigne-Cordin, Aude; Orellana, Guillermo; Haupt, Karsten; Moreno-Bondi, María C

    2013-07-29

    The development and characterization of novel, molecularly imprinted polymer nanofilament-based optical sensors for the analysis of enrofloxacin, an antibiotic widely used for human and veterinary applications, is reported. The polymers were prepared by nanomolding in porous alumina by using enrofloxacin as the template. The antibiotic was covalently immobilized on to the pore walls of the alumina by using different spacers, and the prepolymerization mixture was cast in the pores and the polymer synthesized anchored onto a glass support through UV polymerization. Various parameters affecting polymer selectivity were evaluated to achieve optimal recognition, namely, the spacer arm length and the binding solvent. The results of morphological characterization, binding kinetics, and selectivity of the optimized polymer material for ENR and its derivatives are reported. For sensing purposes, the nanofilaments were incubated in solutions of the target molecule in acetonitrile/HEPES buffer (100 mM, pH 7.5, 50:50, v/v) for 20 min followed by incubation in a 10 mM solution of europium(III) ions to generate a europium(III)-enrofloxacin complex on the polymer surface. The detection event was based on the luminescence of the rare-earth ion (λexc=340 nm; λem=612 nm) that results from energy transfer from the antibiotic excited state to the metal-ion emitting excited state. The limit of detection of the enrofloxacin antibiotic was found to be 0.58 μM. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Faster Synthesis of Beta-Diketonate Ternary Europium Complexes: Elapsed Times & Reaction Yields.

    Science.gov (United States)

    Lima, Nathalia B D; Silva, Anderson I S; Gerson, P C; Gonçalves, Simone M C; Simas, Alfredo M

    2015-01-01

    β-diketonates are customary bidentate ligands in highly luminescent ternary europium complexes, such as Eu(β-diketonate)3(L)2, where L stands for a nonionic ligand. Usually, the syntheses of these complexes start by adding, to an europium salt such as EuCl3(H2O)6, three equivalents of β-diketonate ligands to form the complexes Eu(β-diketonate)3(H2O)2. The nonionic ligands are subsequently added to form the target complexes Eu(β-diketonate)3(L)2. However, the Eu(β-diketonate)3(H2O)2 intermediates are frequently both difficult and slow to purify by recrystallization, a step which usually takes a long time, varying from days to several weeks, depending on the chosen β-diketonate. In this article, we advance a novel synthetic technique which does not use Eu(β-diketonate)3(H2O)2 as an intermediate. Instead, we start by adding 4 equivalents of a monodentate nonionic ligand L straight to EuCl3(H2O)6 to form a new intermediate: EuCl3(L)4(H2O)n, with n being either 3 or 4. The advantage is that these intermediates can now be easily, quickly, and efficiently purified. The β-diketonates are then carefully added to this intermediate to form the target complexes Eu(β-diketonate)3(L)2. For the cases studied, the 20-day average elapsed time reduced to 10 days for the faster synthesis, together with an improvement in the overall yield from 42% to 69%.

  19. Modified magnetic and optical properties of manganese nanoparticles incorporated europium doped magnesium borotellurite glass

    Energy Technology Data Exchange (ETDEWEB)

    Aziz, Siti Maisarah; Sahar, M.R., E-mail: mrahim057@gmail.com; Ghoshal, S.K.

    2017-02-01

    This paper reports the modified optical and magnetic properties of europium (Eu{sup 3+}) ions doped and Manganese nanoparticles (NPs) embedded Magnesium Borotellurite glass synthesized via melt quenching method. The influence of varying Mn NPs concentrations on the magnetic, absorption and emission properties of such glass samples are determined. Stables, transparent and amorphous glasses are obtained. The observed modification of the electronic polarizability is interpreted in terms of the generation of non-bridging oxygen (NBO) and bridging oxygen (BO) in the amorphous network. TEM images manifested the growth of Mn NPs with average diameter 11±1 nm. High-resolution TEM reveals that the lattice spacing of manganese nanoparticles is 0.308 nm at (112) plane. The emission spectra revealed four prominent peaks centered at 587 nm, 610 nm, 651 nm and 700 nm assigned to the transition from {sup 5}D{sub 0} →{sup 7}F{sub J} (J=1, 2, 3, 4) states of Eu{sup 3+} ion. A significant drop in the luminescence intensity due to the incorporation of Mn NPs is ascribed to the enhanced energy transfer from the Eu{sup 3+} ion to NPs. Prepared glass systems exhibited paramagnetic behavior. - Highlights: • The europium doped magnesium borotellurite glasses embedded Mn NPs prepared using the conventional melt-quenching method. • The TEM result reveals the size of Mn NPs while its planar spacing has been determined by HRTEM. • The luminescence properties of TeO{sub 2}–B{sub 2}O{sub 3}–MgO–Eu{sub 2}O{sub 3}–Mn{sub 3}O{sub 4} glasses have been investigated as effect of Mn NPs content. • The magnetization measurement of glass sample is carried out using vibrating sample magnetometer (VSM)

  20. Red polymer light-emitting devices based on an oxadiazole-functionalized europium(III) complex

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yu, E-mail: liuyu03b@126.com [Department of Chemistry, Key Lab of Environment-Friendly Chemistry and Application in the Ministry of Education, Xiangtan University, Xiangtan 411105 (China); Wang, Yafei [Department of Chemistry, Key Lab of Environment-Friendly Chemistry and Application in the Ministry of Education, Xiangtan University, Xiangtan 411105 (China); Li, Chun [Institute of Polymer Optoelectronic Materials and Devices, South China University of Technology, Guangzhou 510640 (China); Huang, Ying; Dang, Dongfeng; Zhu, Meixiang [Department of Chemistry, Key Lab of Environment-Friendly Chemistry and Application in the Ministry of Education, Xiangtan University, Xiangtan 411105 (China); Zhu, Weiguo, E-mail: zhuwg18@126.com [Department of Chemistry, Key Lab of Environment-Friendly Chemistry and Application in the Ministry of Education, Xiangtan University, Xiangtan 411105 (China); Cao, Yong, E-mail: yongcao@scut.edu.cn [Institute of Polymer Optoelectronic Materials and Devices, South China University of Technology, Guangzhou 510640 (China)

    2014-02-14

    A novel tris(dibenzoylmethanato)[5-(2-(4-tert-butylbenzenyl)-5-benzenyl-1,3, 4-oxadiazole-4′)-1,10-phenanthroline]europium(III) [Eu(DBM){sub 3}(BuOXD-Phen)] containing an electron-transporting oxadiazole-functionalized phenanthroline ligand was synthesized and characterized. Its UV–vis absorption and photoluminescence (PL), as well as the electroluminescence (EL) in polymer light-emitting devices (PLEDs) were investigated. The double-layer PLEDs with a configuration of ITO/PEDOT:PSS (50 nm)/PVK (40 nm)/PFO:PBD (30%):Eu(DBM){sub 3}(BuOXD-Phen) (1–8 wt %) (80 nm)/Ba (4 nm)/Al (150 nm) were fabricated. Saturated red Eu{sup 3+} ion emission, based on the {sup 5}D{sub 0} → {sup 7}F{sub 2} transition, is centered at a wavelength of 614 nm with a full width at half maximum (FWHM) of 10 nm. The highest external quantum efficiency (QE{sub ext}) of 1.26% at current density of 1.65 mA cm{sup −2}, with a maximum brightness of 568 cd m{sup −2} at 137.8 mA cm{sup −2} was achieved from the device at 1 wt % dopant concentration. - Highlights: • An oxadiazole-functionalized europium(III) complex of Eu(DBM){sub 3}(BuOXD-Phen) was presented. • The optophysical properties of Eu(DBM){sub 3}(BuOXD-Phen) were investigated. • Saturated red emission was observed in the PLEDs. • An external quantum efficiency of 1.26% was obtained in these devices.

  1. Heat-Resistance of the Powder Cobalt Alloys Reinforced by Niobium or Titanium Carbide

    OpenAIRE

    Cherepova, T.S.; Dmitrieva, G.P.; V.K. Nosenko

    2016-01-01

    The characteristics of heat-resistance of powder cobalt alloys at 1100 °C were investigated. These alloys were developed for the protection of workers banding shelves GTE blades from wear. The alloys were prepared by hot pressing powders of cobalt, chromium, aluminum, iron and niobium or titanium carbides. The values of heat resistance alloys containing carbides between 30 and 70% (vol.) depend on the type made of carbide alloys: alloys with titanium carbide superior in heat-resistant alloy o...

  2. Dilatometry Analysis of Dissolution of Cr-Rich Carbides in Martensitic Stainless Steels

    Science.gov (United States)

    Huang, Qiuliang; Volkova, Olena; Biermann, Horst; Mola, Javad

    2017-12-01

    The dissolution of Cr-rich carbides formed in the martensitic constituent of a 13 pct Cr stainless steel was studied by dilatometry and correlative electron channeling contrast examinations. The dissolution of carbides subsequent to the martensite reversion to austenite was associated with a net volume expansion which in turn increased the dilatometry-based apparent coefficient of thermal expansion (CTEa) during continuous heating. The effects of carbides fraction and size on the CTEa variations during carbides dissolution are discussed.

  3. Elastic and piezoresistive properties of nickel carbides from first principles

    Science.gov (United States)

    Kelling, Jeffrey; Zahn, Peter; Schuster, Jörg; Gemming, Sibylle

    2017-01-01

    The nickel-carbon system has received increased attention over the past years due to the relevance of nickel as a catalyst for carbon nanotube and graphene growth, where nickel carbide intermediates may be involved or carbide interface layers form in the end. Nickel-carbon composite thin films comprising Ni3C are especially interesting in mechanical sensing applications. Due to the metastability of nickel carbides, formation conditions and the coupling between mechanical and electrical properties are not yet well understood. Using first-principles electronic structure methods, we calculated the elastic properties of Ni3C ,Ni2C , and NiC , as well as changes in electronic properties under mechanical strain. We observe that the electronic density of states around the Fermi level does not change under the considered strains of up to 1%, which correspond to stresses up to 3 GPa . Relative changes in conductivity of Ni3C range up to maximum values of about 10%.

  4. Structure-Property Relationship in Metal Carbides and Bimetallic Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Jingguan [University of Delaware

    2014-03-04

    The primary objective of our DOE/BES sponsored research is to use carbide and bimetallic catalysts as model systems to demonstrate the feasibility of tuning the catalytic activity, selectivity and stability. Our efforts involve three parallel approaches, with the aim at studying single crystal model surfaces and bridging the “materials gap” and “pressure gap” between fundamental surface science studies and real world catalysis. The utilization of the three parallel approaches has led to the discovery of many intriguing catalytic properties of carbide and bimetallic surfaces and catalysts. During the past funding period we have utilized these combined research approaches to explore the possibility of predicting and verifying bimetallic and carbide combinations with enhanced catalytic activity, selectivity and stability.

  5. Analysis of carbides and inclusions in high speed tool steels

    DEFF Research Database (Denmark)

    Therkildsen, K.T.; Dahl, K.V.

    2002-01-01

    The fracture surfaces of fatigued specimens were investigated using scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDS). The aim was to quantify the distribution of cracked carbides and non-metallic inclusions on the fracturesurfaces as well as on polished cross...... sections. The specimens were made of Böhler P/M steel grade 390s and 690s in both micro-clean and conventional grades. The results show that the content of non-metallic inclusions are higher in the conventionalgrades than in the microclean grades, but there were found to be no link between non-metallic...... inclusions and the crack initiation. Surprisingly, no differences were found between the carbide size distributions of the micro-clean and conventional grades.Also, the distribution of the fractured carbides was found to be the same regardless of steel type, manufacturing method or location on the specimen....

  6. Ordering of carbon atoms in boron carbide structure

    Energy Technology Data Exchange (ETDEWEB)

    Ponomarev, V. I., E-mail: i2212@yandex.ru; Kovalev, I. D.; Konovalikhin, S. V.; Vershinnikov, V. I. [Russian Academy of Sciences, Institute of Structural Macrokinetics and Materials Science (Russian Federation)

    2013-05-15

    Boron carbide crystals have been obtained in the entire compositional range according to the phase diagram by self-propagating high-temperature synthesis (SHS). Based on the results of X-ray diffraction investigations, the samples were characterized by the unit-cell metric and reflection half-width in the entire range of carbon concentrations. A significant spread in the boron carbide unit-cell parameters for the same carbon content is found in the data in the literature; this spread contradicts the structural concepts for covalent compounds. The SHS samples have not revealed any significant spread in the unit-cell parameters. Structural analysis suggests that the spread of parameters in the literary data is related to the unique process of ordering of carbon atoms in the boron carbide structure.

  7. Sintering of nano crystalline α silicon carbide by doping with boron ...

    Indian Academy of Sciences (India)

    Unknown

    Abstract. Sinterable nano silicon carbide powders of mean particle size (37 nm) were prepared by attrition milling and chemical processing of an acheson type alpha silicon carbide having mean particle size of 0⋅39 µm. (390 nm). Pressureless sintering of these powders was achieved by addition of boron carbide of 0⋅5 wt ...

  8. Sintering of nano crystalline α silicon carbide by doping with boron ...

    Indian Academy of Sciences (India)

    Sinterable nano silicon carbide powders of mean particle size (37 nm) were prepared by attrition milling and chemical processing of an acheson type alpha silicon carbide having mean particle size of 0.39 m (390 nm). Pressureless sintering of these powders was achieved by addition of boron carbide of 0.5 wt% together ...

  9. Formation of Silicon Carbide in the Silicomanganese Process

    OpenAIRE

    Davidsen, Jens Erik

    2011-01-01

    As the silicon content in a silicomanganese alloy increase, silicon carbide becomes the stable carbon phase. Little work is published on the formation of silicon carbide in the SiMn process. This thesis examines the formation of SiC through the reaction between slag, metal and coke. The goal of the thesis has been to determine where and how SiC is formed in the silicomanganese process. Focus has been given to formation through liquid-solid reactions.The investigation was carried out by heatin...

  10. Fluorescent silicon carbide materials for white LEDs and photovoltaics

    DEFF Research Database (Denmark)

    Syväjärvi, Mikael; Ou, Haiyan; Wellmann, Peter

    the luminescence appears in the visible region which is used to produce a white LED with pure white light without need of phosphors [2]. The cubic silicon carbide polytype is challenging to master, and we have explored the growth of this crystal structure. It has a lower bandgap, and by a similar doping concept...... in cubic silicon carbide. The impurity photovoltaic effect could lead to devices with efficiencies comparable to those of tandem systems, and could open a new road for very-high-efficiency solar cells. Such high performance can be reached only if the host material has a large energy gap, like cubic silicon...

  11. Nanofibre growth from cobalt carbide produced by mechanosynthesis

    Energy Technology Data Exchange (ETDEWEB)

    Diaz Barriga-Arceo, L [Instituto Mexicano del Petroleo, Programa de Ingenieria Molecular, Eje Central Lazaro Cardenas 152, Colonia San Bartolo Atepehuacan, Mexico DF, 07730 (Mexico); Orozco, E [Instituto de Fisica UNAM, Apartado Postal 20-364 CP 01000, DF (Mexico); Garibay-Febles, V [Instituto Mexicano del Petroleo, Programa de Ingenieria Molecular, Eje Central Lazaro Cardenas 152, Colonia San Bartolo Atepehuacan, Mexico DF, 07730 (Mexico); Bucio-Galindo, L [Instituto de Fisica UNAM, Apartado Postal 20-364 CP 01000, DF (Mexico); Mendoza Leon, H [FM-UPALM, IPN, Apartado Postal 75-395 CP 07300, DF (Mexico); Castillo-Ocampo, P [UAM-Iztapalapa, Apartado Postal 55-334 CP 09340, DF (Mexico); Montoya, A [Instituto Mexicano del Petroleo, Programa de Ingenieria Molecular, Eje Central Lazaro Cardenas 152, Colonia San Bartolo Atepehuacan, Mexico DF, 07730 (Mexico)

    2004-06-09

    Mechanical alloying was used to prepare cobalt carbide. Microstructural characterization of samples was performed by x-ray diffraction, differential scanning calorimetry and transmission electron microscopy methods. In order to produce carbon nanotubes, the cobalt carbide was precipitated after heating at 800 and 1000 deg. C for 10 min. Nanofibres of about 10-50 nm in diameter, 0.04-0.1 {mu}m in length and 20-200 nm in diameter and 0.6-1.2 {mu}m in length were obtained after heating at 800 and 1000 deg. C, respectively, by means of this process.

  12. Ultrathin fiber poly-3-hydroxybutyrate, modified by silicon carbide nanoparticles

    Science.gov (United States)

    Olkhov, A. A.; Krutikova, A. A.; Goldshtrakh, M. A.; Staroverova, O. V.; Iordanskii, A. L.; Ischenko, A. A.

    2016-11-01

    The article presents the results of studies the composite fibrous material based on poly-3-hydroxybutyrate (PHB) and nano-size silicon carbide obtained by the electrospinning method. Size distribution of the silicon carbide nanoparticles in the fiber was estimated by X-ray diffraction technique. It is shown that immobilization of the SiC nanoparticles to the PHB fibers contributes to obtaining essentially smaller diameter of fibers, high physical-mechanical characteristics and increasing resistance to degradation in comparison with the fibers of PHB.

  13. Electron paramagnetic resonance and photoluminescence investigation of europium local structure in oxyfluoride glass ceramics containing SrF2 nanocrystals

    Science.gov (United States)

    Antuzevics, A.; Kemere, M.; Krieke, G.; Ignatans, R.

    2017-10-01

    Different compositions of europium doped aluminosilicate oxyfluoride glass ceramics prepared in air atmosphere have been studied by electron paramagnetic resonance (EPR) and optical spectroscopy methods. X-ray diffraction (XRD) and transmission electron microscopy (TEM) measurements show presence of homogenously distributed SrF2 nanocrystals after the heat treatment of the precursor glass. Efficient Eu3+ incorporation in the high symmetry environment of glass ceramics is observed from the photoluminescence spectra. EPR spectra indicate Eu3+ → Eu2+ reduction upon precipitation of crystalline phases in the glass matrix. For composition abundant with Eu2+ in the glassy state such behaviour is not detected. Local structure around europium ions is discussed based on differences in chemical compositions.

  14. Bright, highly water-soluble triazacyclononane europium complexes to detect ligand binding with time-resolved FRET microscopy.

    Science.gov (United States)

    Delbianco, Martina; Sadovnikova, Victoria; Bourrier, Emmanuel; Mathis, Gérard; Lamarque, Laurent; Zwier, Jurriaan M; Parker, David

    2014-09-26

    Luminescent europium complexes are used in a broad range of applications as a result of their particular emissive properties. The synthesis and application of bright, highly water-soluble, and negatively charged sulfonic- or carboxylic acid derivatives of para-substituted aryl-alkynyl triazacyclononane complexes are described. Introduction of the charged solubilizing moieties suppresses cellular uptake or adsorption to living cells making them applicable for labeling and performing assays on membrane receptors. These europium complexes are applied to monitor fluorescent ligand binding on cell-surface proteins with time-resolved Förster resonance energy transfer (TR-FRET) assays in plate-based format and using TR-FRET microscopy. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Optical and spectral studies on pure and europium doped olgite type Na(Sr,Ba)PO4 ceramics.

    Science.gov (United States)

    Jawaher, K Rackesh; Jagannathan, R; Das, S Jerome; Krishnan, S

    2015-04-05

    Europium ion doped olgite type Na(Sr,Ba)PO4 ceramics, a new generation of light emitting bulb, was prepared by a high temperature solid-state reaction method. The synthesized materials were subjected to various characterizations such as X-ray powder diffraction, Scanning electron microscopy and FT-IR spectra measurements. The EPR spectrum of the sample exhibits a well-resolved hyperfine structure of 151Eu2+ and 153Eu2+ isotopes and the g value has been calculated. Fluorescence spectra revealed that europium ions were present in divalent as well as in the trivalent oxidation states. The critical distance for energy transfer between Eu2+ and Eu2+ ion is calculated as 20Å, which is in good agreement with that of experimental data. The FTIR analysis reveals all the vibrations of PO4(3-) ions. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. A highly sensitive europium nanoparticle-based immunoassay for detection of influenza A/B virus antigen in clinical specimens.

    Science.gov (United States)

    Zhang, Panhe; Vemula, Sai Vikram; Zhao, Jiangqin; Du, Bingchen; Mohan, Haleyurgirisetty; Liu, Jikun; El Mubarak, Haja Sittana; Landry, Marie L; Hewlett, Indira

    2014-12-01

    We report the development of a novel europium nanoparticle-based immunoassay (ENIA) for rapid detection of influenza A and influenza B viruses. The ENIA demonstrated sensitivities of 90.7% (147/162) for influenza A viruses and 81.80% (9/11) for influenza B viruses compared to those for an in-house reverse transcription (RT)-PCR assay in testing of influenza-positive clinical samples. Copyright © 2014, American Society for Microbiology. All Rights Reserved.

  17. Semiconducting polymer dots doped with europium complexes showing ultranarrow emission and long luminescence lifetime for time-gated cellular imaging.

    Science.gov (United States)

    Sun, Wei; Yu, Jiangbo; Deng, Ruiping; Rong, Yu; Fujimoto, Bryant; Wu, Changfeng; Zhang, Hongjie; Chiu, Daniel T

    2013-10-18

    Bright dots: Semiconducting polymer dots (Pdots) doped with europium complexes possess line-like fluorescence emission, high quantum yield, and long fluorescence lifetime. The Pdots successfully labeled receptors on cells. The long fluorescence lifetime of the Pdots was used to distinguish them from other red fluorescence emitting nanoparticles, and improve the signal-to-noise ratio for time-gated cellular imaging. PVK=poly(9-vinylcarbazole). Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Translocation and biokinetic behavior of nanoscaled europium oxide particles within 5 days following an acute inhalation in rats.

    Science.gov (United States)

    Creutzenberg, Otto; Kock, Heiko; Schaudien, Dirk

    2016-03-01

    Nanoscaled europium oxide (Eu2O3) particles were inhaled by rats after acute exposure and the potential translocation of particles followed by chemical analysis and transmission electron microscopy (TEM) was investigated. An aqueous dispersion (phosphate buffer/bovine serum albumin) of a commercially available Eu2O3 particle fraction consisting partially of nanoscaled particles was aerosolized with pressurized air. After rapid evaporation, rats inhaled the dry aerosol for 6 h in a single exposure resulting in an alveolar calculated dose of approximately 39.5 μg Eu2O3. Using chemical analysis, 36.8 μg Eu2O3 was detected 1 h after lung inhalation. The amount declined slightly to 34.5 μg after 1 day and 35.0 μg after 5 days. The liver showed an increase of Eu2O3 from 32.3 ng 1 h up to 294 ng 5 days after inhalation. Additionally, lung-associated lymph nodes, thymus, kidneys, heart and testis exhibited an increase of europium over the period investigated. In the blood, the highest amount of europium was found 1 h after treatment whereas feces, urine and mesenteric lymph nodes revealed the highest amount 1 day after treatment. Using TEM analysis, particles could be detected only in lungs, and in the liver, no particles were detectable. In conclusion, the translocation of Eu2O3 within 5 days following inhalation could be determined very precisely by chemical analysis. A translocation of Eu2O3 particulate matter to liver was not detectable by TEM analysis; thus, the overproportional level of 0.8% of the lung load observed in the liver after 5 days suggests a filtering effect of dissolved europium with accumulation. Copyright © 2015 John Wiley & Sons, Ltd.

  19. A Highly Sensitive Europium Nanoparticle-Based Immunoassay for Detection of Influenza A/B Virus Antigen in Clinical Specimens

    Science.gov (United States)

    Zhang, Panhe; Zhao, Jiangqin; Du, Bingchen; Mohan, Haleyurgirisetty; Liu, Jikun; El Mubarak, Haja Sittana; Landry, Marie L.

    2014-01-01

    We report the development of a novel europium nanoparticle-based immunoassay (ENIA) for rapid detection of influenza A and influenza B viruses. The ENIA demonstrated sensitivities of 90.7% (147/162) for influenza A viruses and 81.80% (9/11) for influenza B viruses compared to those for an in-house reverse transcription (RT)-PCR assay in testing of influenza-positive clinical samples. PMID:25297327

  20. Nature of the concentration thresholds of europium atom yield from the oxidized tungsten surface under electron stimulated desorption

    CERN Document Server

    Davydov, S Y

    2002-01-01

    The nature of the electron-stimulated desorption (ESD) of the europium atoms by the E sub e irradiating electrons energies, equal to 50 and 80 eV, as well as peculiarities of the Eu atoms yield dependence on their concentration on the oxidized tungsten surface are discussed. It is shown, that the ESD originates by the electron transition from the interval 5p- or 5s shell of the tungsten surface atom onto the oxygen external unfilled 2p-level

  1. Tungsten carbide encapsulated in nitrogen-doped carbon with iron/cobalt carbides electrocatalyst for oxygen reduction reaction

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jie; Chen, Jinwei, E-mail: jwchen@scu.edu.cn; Jiang, Yiwu; Zhou, Feilong; Wang, Gang; Wang, Ruilin, E-mail: rl.wang@scu.edu.cn

    2016-12-15

    Graphical abstract: A hybrid catalyst was prepared via a quite green and simple method to achieve an one-pot synthesis of the N-doping carbon, tungsten carbides, and iron/cobalt carbides. It exhibited comparable electrocatalytic activity, higher durability and ability to methanol tolerance compared with commercial Pt/C to ORR. - Highlights: • A novel type of hybrid Fe/Co/WC@NC catalysts have been successfully synthesized. • The hybrid catalyst also exhibited better durability and methanol tolerance. • Multiple effective active sites of Fe{sub 3}C, Co{sub 3}C, WC, and NC help to improve catalytic performance. - Abstract: This work presents a type of hybrid catalyst prepared through an environmental and simple method, combining a pyrolysis of transition metal precursors, a nitrogen-containing material, and a tungsten source to achieve a one-pot synthesis of N-doping carbon, tungsten carbides, and iron/cobalt carbides (Fe/Co/WC@NC). The obtained Fe/Co/WC@NC consists of uniform Fe{sub 3}C and Co{sub 3}C nanoparticles encapsulated in graphitized carbon with surface nitrogen doping, closely wrapped around a plate-like tungsten carbide (WC) that functions as an efficient oxygen reduction reaction (ORR) catalyst. The introduction of WC is found to promote the ORR activity of Fe/Co-based carbide electrocatalysts, which is attributed to the synergistic catalysts of WC, Fe{sub 3}C, and Co{sub 3}C. Results suggest that the composite exhibits comparable electrocatalytic activity, higher durability, and ability for methanol tolerance compared with commercial Pt/C for ORR in alkaline electrolyte. These advantages make Fe/Co/WC@NC a promising ORR electrocatalyst and a cost-effective alternative to Pt/C for practical application as fuel cell.

  2. Ultrasmall Superparamagnetic Iron Oxide Nanoparticles with Europium(III) DO3A as a Bimodal Imaging Probe.

    Science.gov (United States)

    Carron, Sophie; Bloemen, Maarten; Vander Elst, Luce; Laurent, Sophie; Verbiest, Thierry; Parac-Vogt, Tatjana N

    2016-03-18

    A new prototype consisting of ultrasmall superparamagnetic iron oxide (USPIO) nanoparticles decorated with europium(III) ions encapsulated in a DO3A organic scaffold was designed as a platform for further development of bimodal contrast agents for MRI and optical imaging. The USPIO nanoparticles act as negative MRI contrast agents, whereas the europium(III) ion is a luminophore that is suitable for use in optical imaging detection. The functionalized USPIO nanoparticles were characterized by TEM, DLS, XRD, FTIR, and TXRF analysis, and a full investigation of the relaxometric and optical properties was conducted. The typical luminescence emission of europium(III) was observed and the main red emission wavelength was found at 614 nm. The relaxometric study of these ultrasmall nanoparticles showed r2 values of 114.8 mM(-1) Fes(-1) at 60 MHz, which is nearly double the r2 relaxivity of Sinerem(®). © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. A lysosome targetable luminescent bioprobe based on a europium β-diketonate complex for cellular imaging applications.

    Science.gov (United States)

    George, T M; Krishna, Mahesh S; Reddy, M L P

    2016-11-22

    Herein, we report a novel lysosome targetable luminescent bioprobe derived from a europium coordination compound, namely Eu(pfphOCH3IN)3(DDXPO) 4 [where HpfphOCH3IN = 4,4,5,5,5-pentafluoro-3-hydroxy-1-(1-(4-methoxyphenyl)-1H-indol-3-yl)pent-2-en-1-one and DDXPO = 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene oxide]. Notably, the newly designed europium complex exhibits significant quantum yield (Φoverall = 25 ± 3%) and 5D0 excited state lifetime (τ = 398 ± 3 μs) values under physiological pH (7.2) conditions when excited at 405 nm. Hence the developed europium complex has been evaluated for live cell imaging applications using mouse pre-adipocyte cell lines (3T3L1). Colocalization studies of the designed bio-probe with commercial Lysosome-GFP in 3T3L1 cells demonstrated the specific localization of the probe in the lysosome with a high colocalization coefficient (A = 0.83). Most importantly, the developed bioprobe exhibits good cell permeability, photostability and non-cytotoxicity.

  4. Mössbauer spectroscopy of europium-doped fluorochlorozirconate glasses and glass ceramics: optimization of storage phosphors in computed radiography.

    Science.gov (United States)

    Pfau, C; Paßlick, C; Gray, S K; Johnson, J A; Johnson, C E; Schweizer, S

    2013-05-22

    Eu(2+)-doped fluorochlorozirconate (FCZ) glasses and glass ceramics, which are being developed for medical and photovoltaic applications, have been analysed by Mössbauer spectroscopy. The oxidation state and chemical environment of the europium ions, which are important for the performance of these materials, were investigated. Routes for maximizing the divalent europium content were also investigated. By using EuCl2 instead of EuF2 in the starting material a fraction of about 90% of the europium was maintained in the Eu(2+) state as opposed to about 70% when using EuF2. The glass ceramics produced by subsequent thermal processing contain BaCl2 nanocrystals in which Eu(2+) is incorporated, as shown by the narrower linewidth in the Mössbauer spectrum. Debye temperatures of 147 K and 186 K for Eu(2+) and Eu(3+), respectively, were determined from temperature dependent Mössbauer measurements. The f-factors were used to obtain the Eu(2+)/Eu(3+) ratio from the area ratio of the corresponding absorption lines.

  5. Hydrogen evolution activity and electrochemical stability of selected transition metal carbides in concentrated phosphoric acid

    DEFF Research Database (Denmark)

    Tomás García, Antonio Luis; Jensen, Jens Oluf; Bjerrum, Niels J.

    2014-01-01

    Alternative catalysts based on carbides of Group 5 (niobium and tantalum) and 6 (chromium, molybdenum and tungsten) metals were prepared as films on the metallic substrates. The electrochemical activities of these carbide electrodes towards the hydrogen evolution reaction (HER) in concentrated...... phosphoric acid were investigated in a temperature range from 80 to 170°C. A significant dependence of the activities on temperature was observed for all five carbide samples. Through the entire temperature range Group 6 metal carbides showed higher activity than that of the Group 5 metal carbides...

  6. Growth stress in tungsten carbide-diamond-like carbon coatings

    NARCIS (Netherlands)

    Pujada, B.R.; Tichelaar, F.D.; Arnoldbik, W.M.; Sloof, W.G.; Janssen, G.C.A.M.

    2009-01-01

    Growth stress in tungsten carbide-diamond-like carbon coatings, sputter deposited in a reactive argon/acetylene plasma, has been studied as a function of the acetylene partial pressure. Stress and microstructure have been investigated by wafer curvature and transmission electron microscopy (TEM)

  7. Highly permeable and mechanically robust silicon carbide hollow fiber membranes

    NARCIS (Netherlands)

    de Wit, Patrick; Kappert, Emiel; Lohaus, T.; Wessling, Matthias; Nijmeijer, Arian; Benes, Nieck Edwin

    2015-01-01

    Silicon carbide (SiC) membranes have shown large potential for applications in water treatment. Being able to make these membranes in a hollow fiber geometry allows for higher surface-to-volume ratios. In this study, we present a thermal treatment procedure that is tuned to produce porous silicon

  8. stabilization of ikpayongo laterite with cement and calcium carbide ...

    African Journals Online (AJOL)

    PROF EKWUEME

    Laterite obtained from Ikpayongo was stabilized with 2-10 % cement and 2-10 % Calcium Carbide waste, for use as pavement material. Atterberg's limits test, California bearing ratio (CBR) and unconfined compressive strength (UCS) tests were conducted on the natural laterite and the treated soil specimens. The plasticity ...

  9. Erratum to: Synthesis and investigation of silicon carbide nanowires ...

    Indian Academy of Sciences (India)

    Bull. Mater. Sci., Vol. 39, No. 4, August 2016, p. 961. c Indian Academy of Sciences. DOI 10.1007/s12034-016-1267-y. Erratum to: Synthesis and investigation of silicon carbide nanowires by. HFCVD method. S H MORTAZAVI. ∗. , M GHORANNEVISS, M DADASHBABA and R ALIPOUR. Plasma Physics Research Center, ...

  10. Influence of nanometric silicon carbide on phenolic resin composites ...

    Indian Academy of Sciences (India)

    Department of Polymer Science & Rubber Technology,. Cochin University of Science and Technology. [32] Perez J M, Echeverria J M, Oliet M, Alonso M V and. Rodriguez F 2007 BioResources 2 270. [33] Janz S 2006 Amorphous silicon carbide for photovoltaic applications (Masters Thesis). Fakultät für Physik Universität.

  11. Effect of tempering after cryogenic treatment of tungsten carbide ...

    Indian Academy of Sciences (India)

    #Department of Industrial and Production Engineering, National Institute of Technology, Jalandhar 144 001, India. MS received 10 ... Tungsten carbide is the most commonly used cutting tool material in the industry and the tech- nique can also be ..... in the WC-Co inserts and was present in the form of clusters of particles ...

  12. Erratum to: Synthesis and investigation of silicon carbide nanowires ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 4. Erratum to: Synthesis and investigation of silicon carbide nanowires by HFCVD method. S H MORTAZAVI M GHORANNEVISS M DADASHBABA R ALIPOUR. Volume 39 Issue 4 August 2016 pp 961-961 ...

  13. On Measurement and Interpretation of Toughness Behaviour of Carbide Tools

    NARCIS (Netherlands)

    Kals, H.J.J.

    1981-01-01

    The actual significance of any definition of toughness behaviour of carbide tools depends on the existence of an interrelation between the quality as defined and the occurrence of chipping and premature failure in cutting. While at present there is no adequate analysis available and the existing

  14. Synthesis and investigation of silicon carbide nanowires by HFCVD ...

    Indian Academy of Sciences (India)

    Home; Journals; Bulletin of Materials Science; Volume 39; Issue 4. Synthesis and investigation of silicon carbide nanowires by HFCVD ... Also Mountains Map Premium (64-bit version)software is used to investigate morphological features of samples. In this context, the analysis of the motifs, depth histograms, statistical ...

  15. Indentation fatigue in silicon nitride, alumina and silicon carbide ...

    Indian Academy of Sciences (India)

    Repeated indentation fatigue (RIF) experiments conducted on the same spot of different structural ceramics viz. a hot pressed silicon nitride (HPSN), sintered alumina of two different grain sizes viz. 1 m and 25 m, and a sintered silicon carbide (SSiC) are reported. The RIF experiments were conducted using a Vicker's ...

  16. Stabilization of Ikpayongo laterite with cement and calcium carbide ...

    African Journals Online (AJOL)

    Laterite obtained from Ikpayongo was stabilized with 2-10 % cement and 2-10 % Calcium Carbide waste, for use as pavement material. Atterberg's limits test, California bearing ratio (CBR) and unconfined compressive strength (UCS) tests were conducted on the natural laterite and the treated soil specimens. The plasticity ...

  17. RICE-HUSK ASH-CARBIDE-WASTE STABILIZATION OF ...

    African Journals Online (AJOL)

    This paper present results of the laboratory evaluation of the characteristics of carbide waste and rice husk ash stabilized reclaimed asphalt pavement waste with a view to determine its suitability for use as flexible pavement material. The mixtures were subjected to British Standard heavy compactive effort to determine the ...

  18. Carbide-fluoride-silver self-lubricating composite

    Science.gov (United States)

    Sliney, Harold E. (Inventor)

    1987-01-01

    A self-lubricating, friction and wear reducing composite material is described for use over a wide temperature spectrum from cryogenic temperature to about 900 C in a chemically reactive environment comprising silver, barium fluoride/calcium fluoride eutectic, and metal bonded chromium carbide.

  19. Carbide/fluoride/silver self-lubricating composite

    Science.gov (United States)

    Sliney, Harold E. (Inventor)

    1988-01-01

    A self-lubricating, friction and wear reducing composite material for use over a wide temperature spectrum from cryogenic temperature to about 900.degree. C. in a chemically reactive environment comprising silver, barium fluoride/calcium fluoride eutectic, and metal bonded chromium carbide.

  20. SEM investigation of minor constituents of carbide materials ...

    Indian Academy of Sciences (India)

    It is revealed that the noble metals phases occur as separate microsized grains, most of which have been indicated as Au–Ag–Hg amalgam and rarely as Pt-rich compounds. The obtained data can be mainly used to advance technologies for manufacturing carbide-based composite materials from natural carbonaceous ...

  1. Sintering of nano crystalline o silicon carbide doping with

    Indian Academy of Sciences (India)

    Sinterable silicon carbide powders were prepared by attrition milling and chemical processing of an acheson type -SiC. Pressureless sintering of these powders was achieved by addition of aluminium nitride together with carbon. Nearly 99% sintered density was obtained. The mechanism of sintering was studied by ...

  2. Protective infrared antireflection coating based on sputtered germanium carbide

    Science.gov (United States)

    Gibson, Des; Waddell, Ewan; Placido, Frank

    2011-09-01

    This paper describes optical, durablility and environmental performance of a germanium carbide based durable antireflection coating. The coating has been demonstrated on germanium and zinc selenide infra-red material however is applicable to other materials such as zinc sulphide. The material is deposited using a novel reactive closed field magnetron sputtering technique, offering significant advantages over conventional evaporation processes for germanium carbide such as plasma enhanced chemical vapour deposition. The sputtering process is "cold", making it suitable for use on a wide range of substrates. Moreover, the drum format provide more efficient loading for high throughput production. The use of the closed field and unbalanced magnetrons creates a magnetic confinement that extends the electron mean free path leading to high ion current densities. The combination of high current densities with ion energies in the range ~30eV creates optimum thin film growth conditions. As a result the films are dense, spectrally stable, supersmooth and low stress. Films incorporate low hydrogen content resulting in minimal C-H absorption bands within critical infra-red passbands such as 3 to 5um and 8 to 12um. Tuning of germanium carbide (Ge(1-x)Cx) film refractive index from pure germanium (refractive index 4) to pure germanium carbide (refractive index 1.8) will be demonstrated. Use of film grading to achieve single and dual band anti-reflection performance will be shown. Environmental and durability levels are shown to be suitable for use in harsh external environments.

  3. Silicon Carbide and Magnetorresistive Technologies for Solid State Power Controllers

    Directory of Open Access Journals (Sweden)

    Garrigós A.

    2017-01-01

    Full Text Available The aim of this paper is to make an introduction, review and preliminary investigation tasks of the application of Silicon Carbide (SiC power semiconductors and magnetoresistive (MR current sensors for Solid State Power Controllers (SSPCs and controlled switches, especially for high temperature environment and/or high voltage applications.

  4. Influence of nanometric silicon carbide on phenolic resin composites ...

    Indian Academy of Sciences (India)

    ... tribological performance, improving their strength, stiffness and abrasive properties. The best results were obtained for 1 wt% nSiC, proving that this value is the optimum nanometric silicon carbide content. The results indicate that these materials could be effectively used to obtain ablative or carbon–carbon composites in ...

  5. Effect of tempering after cryogenic treatment of tungsten carbide ...

    Indian Academy of Sciences (India)

    Cryogenic treatment is a recent advancement in the field of machining to improve the properties of cutting tool materials. Tungsten carbide is the most commonly used cutting tool material in the industry and the technique can also be extended to it. Although the importance of tempering after cryogenic treatment has been ...

  6. PECVD silicon carbide surface micromachining technology and selected MEMS applications

    NARCIS (Netherlands)

    Rajaraman, V.; Pakula, L.S.; Yang, H.; French, P.J.; Sarro, P.M.

    2011-01-01

    Attractive material properties of plasma enhanced chemical vapour deposited (PECVD) silicon carbide (SiC) when combined with CMOS-compatible low thermal budget processing provides an ideal technology platform for developing various microelectromechanical systems (MEMS) devices and merging them with

  7. Development of Bulk Nanocrystalline Cemented Tungsten Carbide for Industrial Applicaitons

    Energy Technology Data Exchange (ETDEWEB)

    Z. Zak Fang, H. Y. Sohn

    2009-03-10

    This report contains detailed information of the research program entitled "Development of Bulk Nanocrystalline Cemented Tungsten Carbide Materials for Industrial Applications". The report include the processes that were developed for producing nanosized WC/Co composite powders, and an ultrahigh pressure rapid hot consolidation process for sintering of nanosized powders. The mechanical properties of consolidated materials using the nanosized powders are also reported.

  8. Synthesis of carbon fibre-reinforced, silicon carbide composites by ...

    Indian Academy of Sciences (India)

    pyrolysis (PIP), liquid silicon infiltration (LSI), sol–gel, reaction hot-pressing, have been used for ... resin matrix and is then infiltrated with molten silicon (Krenkel 2001); but the presence of free silicon may act as a ... and (iv) finally carbothermal reduction of oxides to carbides/borides at 1873 and 1973 K for 3 h as shown by ...

  9. Heat-Resistance of the Powder Cobalt Alloys Reinforced by Niobium or Titanium Carbide

    Directory of Open Access Journals (Sweden)

    Cherepova, T.S.

    2016-01-01

    Full Text Available The characteristics of heat-resistance of powder cobalt alloys at 1100 °C were investigated. These alloys were developed for the protection of workers banding shelves GTE blades from wear. The alloys were prepared by hot pressing powders of cobalt, chromium, aluminum, iron and niobium or titanium carbides. The values of heat resistance alloys containing carbides between 30 and 70% (vol. depend on the type made of carbide alloys: alloys with titanium carbide superior in heat-resistant alloy of niobium carbide. The most significant factor affecting on the heat-resistant alloys, is porosity: with its increase the parameters decline regardless of the type and content of carbide. The optimum composition of powder heat resisting alloys of titanium carbide with a melting point above 1300 °C were determined for use in the aircraft engine.

  10. Formation mechanism of spheroidal carbide in ultra-low carbon ductile cast iron

    Directory of Open Access Journals (Sweden)

    Bin-guo Fu

    2016-09-01

    Full Text Available The formation mechanism of the spheroidal carbide in the ultra-low carbon ductile cast iron fabricated by the metal mold casting technique was systematically investigated. The results demonstrated that the spheroidal carbide belonged to eutectic carbide and crystallized in the isolated eutectic liquid phase area. The formation process of the spheroidal carbide was related to the contact and the intersection between the primary dendrite and the secondary dendrite of austenite. The oxides of magnesium, rare earths and other elements can act as heterogeneous nucleation sites for the spheroidal carbide. It was also found that the amount of the spheroidal carbide would increase with an increase in carbon content. The cooling rate has an important influence on the spheroidal carbide under the same chemical composition condition.

  11. Synthesis, Characterization, and Enhanced Magnetic Properties of Iron Carbide Nanomaterials

    Science.gov (United States)

    Williams, Brent M.

    Permanent magnets are classified as hard magnetic materials with the main purpose of generating flux for applications such as electric motors, turbines, and hard drives. High coercivity, magnetic remanence, and saturation values with high stability are some of the requirements for permanent magnets. Rare-earth magnets including neodymium and samarium based magnets are known to have superior magnetic properties due to their high magnetocrystalline anisotropy. However, due to the price of rare-earth materials development of alternate permanent magnets composed of inexpensive materials is an ongoing process. Previously cobalt carbide (CoxC) have shown promise as a potential rare-earth free magnet alternative with magnetic properties comparable to that of hexaferrite materials. Unfortunately, CoxC magnets have a low magnetic saturation (50 emu g-1) which drastically lowers its energy product. Alternatively, iron carbide has a rather high bulk magnetization value of 140 emu g-1 and is composed of naturally abundant materials. The sole issue of iron carbide is that it is considered an intermediate magnet with properties between those of a hard and a soft magnetic material. The main focus of this work is the enhancement of the hard magnetic properties of iron carbide through size effect, shape anisotropy, magnetocrystalline anisotropy and exchange anisotropy. First a wet synthesis method was developed which utilized hexadecyltrimethylammonium chloride to control particle size, shape, and crystal structure to manipulate the magnetic properties of iron carbide. With this method a semi-hard 50 nm orthorhombic Fe3C phase and a magnetically soft single crystal hexagonal Fe7C3 structure with texture-induced magnetic properties were developed. The properties for both materials were further enhanced through formation of exchange bias Fe3C/CoO nanoaggregates and spring exchange coupling of the ferromagnetically hard and soft phases of Fe7C3/SrFe 12O19. A 33% increase in coercivity

  12. Coarsening of carbides during different heat treatment conditions

    Energy Technology Data Exchange (ETDEWEB)

    Miao, Kai, E-mail: miaok21@126.com; He, Yanlin, E-mail: ylhe@staff.shu.edu.cn; Zhu, Naqiong; Wang, Jingjing; Lu, Xiaogang; Li, Lin

    2015-02-15

    Highlights: • Coarsening of M{sub 7}C{sub 3} and V{sub 4}C{sub 3} carbides was quantitatively described in detail. • Cooling mode is a key factor to the simulation for the coarsening of carbides. • Coarsening of above spherical carbides can be calculated by Ostwald ripening model. • The interfacial energy between the γ matrix with M{sub 7}C{sub 3} and V{sub 4}C{sub 3} carbides are 0.7 J/m{sup 2}. - Abstract: Coarsening of carbides in 1# Fe-5.96Cr-0.35C (wt.%) alloy and 2# Fe-0.5V-0.53C (wt.%) alloy during different heat treatment conditions was investigated by carbon replica, high-resolution transmission electron microscopy (HRTEM) , X-ray diffraction (XRD) and SEM techniques. The equilibrium phases at 850 °C constitute of austenitic matrix (γ) + M{sub 7}C{sub 3} and austenite matrix (γ) + V{sub 4}C{sub 3} for 1# and 2# alloy respectively. Morphology of M{sub 7}C{sub 3} and V{sub 4}C{sub 3} carbides was mainly determined by cooling mode due to the different nucleation sites and growth mechanisms. Under directly aging condition, most carbides nucleate in the grain boundaries and grow into rod-shaped or flake-shaped particles by discontinuous growth mechanism. These particles turn out to be excluded during coarsening simulation using Oswald ripening model to give a more reasonable result. In addition, interfacial energy between M{sub 7}C{sub 3}/γ and V{sub 4}C{sub 3}/γ for the coarsening of M{sub 7}C{sub 3} and V{sub 4}C{sub 3} during aging at 850 °C is evaluated by fitting experimental data using thermodynamic and kinetic calculations. The interfacial energy is determined to be 0.7 J/m{sup 2} for the coarsening of M{sub 7}C{sub 3} and V{sub 4}C{sub 3} in austenitic matrix.

  13. Fast and Selective Preconcentration of Europium from Wastewater and Coal Soil by Graphene Oxide/Silane@Fe3O4 Dendritic Nanostructure.

    Science.gov (United States)

    Patra, Santanu; Roy, Ekta; Madhuri, Rashmi; Sharma, Prashant K

    2015-05-19

    In this study, nanocomposite of graphene oxide and silane modified magnetic nanoparticles (silane@Fe3O4) were synthesized in a form of dendritic structure. For this, silane@Fe3O4 nanoparticle gets sandwiched between two layers of graphene oxide by chemical synthesis route. The synthesized dendritic structure was used as a monomer for synthesis of europium ion imprinted polymer. The synthesis of imprinted polymer was contemplated onto the surface of the vinyl group modified silica fiber by activated generated free radical atom-transfer radical polymerization, that is, AGET-ATRP technique. The synthesized dendritic monomer was characterized by XRD, FT-IR, VSM, FE-SEM, and TEM analyses. The imprinted polymer modified silica fiber was first validated in the aqueous and blood samples for successful extraction and detection of europium ion with limit of detection = 0.050 pg mL(-1) (signal/noise = 3). The imprinted polymer modified silica fiber was also used for preconcentration and separation of europium metal ion from various soil samples of coal mine areas. However, the same silica fiber was also used for wastewater treatment and shows 100% performance for europium removal. The findings herein suggested that dendritic nanocomposite could be potentially used as a highly effective material for the enrichment and preconcentration of europium or other trivalent lanthanides/actinides in nuclear waste management.

  14. Development of europium doped core-shell silica cobalt ferrite functionalized nanoparticles for magnetic resonance imaging.

    Science.gov (United States)

    Kevadiya, Bhavesh D; Bade, Aditya N; Woldstad, Christopher; Edagwa, Benson J; McMillan, JoEllyn M; Sajja, Balasrinivasa R; Boska, Michael D; Gendelman, Howard E

    2017-02-01

    The size, shape and chemical composition of europium (Eu3+) cobalt ferrite (CFEu) nanoparticles were optimized for use as a "multimodal imaging nanoprobe" for combined fluorescence and magnetic resonance bioimaging. Doping Eu3+ ions into a CF structure imparts unique bioimaging and magnetic properties to the nanostructure that can be used for real-time screening of targeted nanoformulations for tissue biodistribution assessment. The CFEu nanoparticles (size ∼7.2nm) were prepared by solvothermal techniques and encapsulated into poloxamer 407-coated mesoporous silica (Si-P407) to form superparamagnetic monodisperse Si-CFEu nanoparticles with a size of ∼140nm. Folic acid (FA) nanoparticle decoration (FA-Si-CFEu, size ∼140nm) facilitated monocyte-derived macrophage (MDM) targeting. FA-Si-CFEu MDM uptake and retention was higher than seen with Si-CFEu nanoparticles. The transverse relaxivity of both Si-CFEu and FA-Si-CFEu particles were r2=433.42mM-1s-1 and r2=419.52mM-1s-1 (in saline) and r2=736.57mM-1s-1 and r2=814.41mM-1s-1 (in MDM), respectively. The results were greater than a log order-of-magnitude than what was observed at replicate iron concentrations for ultrasmall superparamagnetic iron oxide (USPIO) particles (r2=31.15mM-1s-1 in saline) and paralleled data sets obtained for T2 magnetic resonance imaging. We now provide a developmental opportunity to employ these novel particles for theranostic drug distribution and efficacy evaluations. A novel europium (Eu3+) doped cobalt ferrite (Si-CFEu) nanoparticle was produced for use as a bioimaging probe. Its notable multifunctional, fluorescence and imaging properties, allows rapid screening of future drug biodistribution. Decoration of the Si-CFEu particles with folic acid increased its sensitivity and specificity for magnetic resonance imaging over a more conventional ultrasmall superparamagnetic iron oxide particles. The future use of these particles in theranostic tests will serve as a platform for

  15. Tuning Eu{sup 3+} emission in europium sesquioxide films by changing the crystalline phase

    Energy Technology Data Exchange (ETDEWEB)

    Mariscal, A., E-mail: antonio.mariscal@csic.es [Laser Processing Group, Instituto de Óptica, CSIC, C/ Serrano 121, 28006 Madrid (Spain); Quesada, A. [Ceramics for Smart Systems Group, Instituto de Cerámica y Vidrio, C/ Kelsen 5, 28049 Madrid (Spain); Camps, I. [Laser Processing Group, Instituto de Óptica, CSIC, C/ Serrano 121, 28006 Madrid (Spain); Palomares, F.J. [Instituto de Ciencia de Materiales de Madrid, C/ Sor Juana Inés de la Cruz 3, 28049 Madrid (Spain); Fernández, J.F. [Ceramics for Smart Systems Group, Instituto de Cerámica y Vidrio, C/ Kelsen 5, 28049 Madrid (Spain); Serna, R. [Laser Processing Group, Instituto de Óptica, CSIC, C/ Serrano 121, 28006 Madrid (Spain)

    2016-06-30

    Highlights: • PLD production of high quality europium sesquioxide (Eu{sub 2}O{sub 3}) films. • The deposition of Al{sub 2}O{sub 3} capping and/or buffer layers modifies the crystallization for Eu{sub 2}O{sub 3} films upon annealing. • The formation of cubic or monoclinic phases can be favored. • Eu{sup 3+} emission tuning is achieved as a consequence of crystal field effects. - Abstract: We report the growth of europium sesquioxide (Eu{sub 2}O{sub 3}) thin films by pulsed laser deposition (PLD) in vacuum at room temperature from a pure Eu{sub 2}O{sub 3} ceramic bulk target. The films were deposited in different configurations formed by adding capping and/or buffer layers of amorphous aluminum oxide (a-Al{sub 2}O{sub 3}). The optical properties, refractive index and extinction coefficient of the as deposited Eu{sub 2}O{sub 3} layers were obtained. X-ray photoelectron spectroscopy (XPS) measurements were done to assess its chemical composition. Post-deposition annealing was performed at 500 °C and 850 °C in air in order to achieve the formation of crystalline films and to accomplish photoluminescence emission. According to the analysis of X-ray diffraction (XRD) spectra, cubic and monoclinic phases were formed. It is found that the relative amount of the phases is related to the different film configurations, showing that the control over the crystallization phase can be realized by adequately designing the structures. All the films showed photoluminescence emission peaks (under excitation at 355 nm) that are attributed to the intra 4f-transitions of Eu{sup 3+} ions. The emission spectral shape depends on the crystalline phase of the Eu{sub 2}O{sub 3} layer. Specifically, changes in the hypersensitive {sup 5}D{sub 0} → {sup 7}F{sub 2} emission confirm the strong influence of the crystal field effect on the Eu{sup 3+} energy levels.

  16. Selective-area laser deposition (SALD) Joining of silicon carbide with silicon carbide filler

    Science.gov (United States)

    Harrison, Shay Llewellyn

    Selective Area Laser Deposition (SALD) is a gas-phase, solid freeform fabrication (SFF) process that utilizes a laser-driven, pyrolytic gas reaction to form a desired solid product. This solid product only forms in the heated zone of the laser beam and thus can be selectively deposited by control of the laser position. SALD Joining employs the SALD method to accomplish 'welding' of ceramic structures together. The solid reaction product serves as a filler material to bond the two parts. The challenges involved with ceramic joining center around the lack of a liquid phase, little plastic deformation and diffusivity and poor surface wetting for many ceramic materials. Due to these properties, traditional metal welding procedures cannot be applied to ceramics. Most alternative ceramic welding techniques use some form of a metal addition to overcome these material limitations. However, the metal possesses a lower ultimate use temperature than the ceramic substrate and therefore it decreases the temperature range over which the joined part can be safely used. SALD Joining enjoys several advantages over these ceramic welding procedures. The solid filler material chemistry can be tailored to match the type of ceramic substrate and therefore fabricate monolithic joints. The SALD filler material bonds directly to the substrate and the joined structure is made in a one step process, without any post-processing. The research documented in this dissertation focused on SALD Joining of silicon carbide structures with silicon carbide filler material. A historical progression of gas-phase SFF research and a literature review of the most prominent ceramic joining techniques are provided. A variety of SiC substrates were examined, as were various conditions of gas precursor pressures and mixtures, laser beam scan speed and joint configuration. The SALD material was characterized for composition and structure by x-ray diffraction, transmission electron microscopy and nuclear magnetic

  17. STATUS OF HIGH FLUX ISOTOPE REACTOR IRRADIATION OF SILICON CARBIDE/SILICON CARBIDE JOINTS

    Energy Technology Data Exchange (ETDEWEB)

    Katoh, Yutai [ORNL; Koyanagi, Takaaki [ORNL; Kiggans, Jim [ORNL; Cetiner, Nesrin [ORNL; McDuffee, Joel [ORNL

    2014-09-01

    Development of silicon carbide (SiC) joints that retain adequate structural and functional properties in the anticipated service conditions is a critical milestone toward establishment of advanced SiC composite technology for the accident-tolerant light water reactor (LWR) fuels and core structures. Neutron irradiation is among the most critical factors that define the harsh service condition of LWR fuel during the normal operation. The overarching goal of the present joining and irradiation studies is to establish technologies for joining SiC-based materials for use as the LWR fuel cladding. The purpose of this work is to fabricate SiC joint specimens, characterize those joints in an unirradiated condition, and prepare rabbit capsules for neutron irradiation study on the fabricated specimens in the High Flux Isotope Reactor (HFIR). Torsional shear test specimens of chemically vapor-deposited SiC were prepared by seven different joining methods either at Oak Ridge National Laboratory or by industrial partners. The joint test specimens were characterized for shear strength and microstructures in an unirradiated condition. Rabbit irradiation capsules were designed and fabricated for neutron irradiation of these joint specimens at an LWR-relevant temperature. These rabbit capsules, already started irradiation in HFIR, are scheduled to complete irradiation to an LWR-relevant dose level in early 2015.

  18. Precipitation and Evolution Behavior of Carbide During Heat Treatments of GCr15 Bearing Steel

    Directory of Open Access Journals (Sweden)

    MA Chao

    2017-06-01

    Full Text Available The evolution behavior of carbides in GCr15 bearing steels after spheroidization annealing, austenitization quenching and low temperature tempering was investigated by the method of quantitative metallography. Numerical simulations on the dissolution kinetics of carbide size and composition during austenitization were performed by ThermoCalc software. The results indicate that the carbide particles formed after spheroidization annealing have a multimodal distribution whilst their size distribution changes to have a single peak after austenitization and tempering, and Cr content increases slightly after austenitization; the carbide particles appear to have larger size with higher Cr content; C rich austenite is formed during austenitization through solid solution by carbides after spheroidization annealing, and then high carbon martensite is formed after quenching and results in the high hardness; Cr atoms can partition from austenite to carbide during the dissolution of carbide, lead to the increasing Cr content of rest carbide particles; the numerical simulations indicate that the carbide particles with the diameter of 200nm cannot completely be dissolved during austenitization even if its Cr content is close to the nominal Cr content of steel, and the undissolved ones may affect the precipitation of carbides during the subsequent tempering.

  19. Highly efficient precipitation of phosphoproteins using trivalent europium, terbium, and erbium ions

    Energy Technology Data Exchange (ETDEWEB)

    Guezel, Yueksel; Rainer, Matthias; Mirza, Munazza Raza; Bonn, Guenther K. [Leopold-Franzens University, Institute of Analytical Chemistry and Radiochemistry, Innsbruck (Austria)

    2012-05-15

    This study describes a highly efficient method for the selective precipitation of phosphoproteins by trivalent europium, terbium, and erbium metal ions. These metal cations belong to the group of lanthanides and are known to be hard acceptors with an overwhelming preference for oxygen-containing anions such as phosphates to which they form very tight ionic bonds. The method could be successfully applied to specifically precipitate phosphoproteins from complex samples including milk and egg white by forming solid metal-protein complexes. Owing to the low solubility product of the investigated lanthanide salts, the produced metal-protein complexes showed high stability. The protein pellets were extensively washed to remove nonphosphorylated proteins and contaminants. For the analysis of proteins the pellets were first dissolved in 30 % formic acid and subjected to matrix-assisted laser desorption/ionization-time of flight (MALDI-TOF) MS. For peptide mass-fingerprint analysis the precipitated phosphoproteins were enzymatically digested using microwave-assisted digestion. The method was found to be highly specific for the isolation and purification of phosphoproteins. Protein quantification was performed by colorimetric detection of total precipitated phosphoproteins and revealed more than 95 % protein recovery for each lanthanide salt. (orig.)

  20. Effects of europium polyoxometalate encapsulated in silica nanoparticles (nanocarriers) in soil invertebrates

    Science.gov (United States)

    Bicho, Rita C.; Soares, Amadeu M. V. M.; Nogueira, Helena I. S.; Amorim, Mónica J. B.

    2016-12-01

    Polyoxometalates (POMs) are metal oxo clusters that have been investigated for several applications in material sciences, catalysis, and biomedicine; these gained increasing interest in the field of nanotechnology as nanocarriers for drug delivery. Associated to the increasing applications, there is the need for information regarding the effects on the environment of these compounds, which is completely absent in the literature. In the present study, the effects of europium polyoxometalates encapsulated into silica nanoparticles (Eu-POM/SiO2 NPs) were assessed on the soil representative Enchytraeus crypticus. The individual materials were also assessed (Eu-POMs and SiO2 NPs). Toxicity was evaluated in various test media with increasing complexity: water, soil/water extracts, and soil. Toxicity was only observed for Eu-POM/SiO2 NPs and in the presence of soil components. Despite the fact that effects were observed for concentrations higher than current predicted environmental concentration (PEC), attention should be given to the growing use of these compounds. The present study shows the importance of assessing the effects in soil media, also compared to water. Moreover, results of "no effect" are critically needed and often unpublished. The present study can contribute to the improvement of the OECD guidelines for safety of manufactured nanomaterials on environmental toxicity in the soil compartment providing an improved test alternative.

  1. Spectral Interferences Manganese (Mn) - Europium (Eu) Lines in X-Ray Fluorescence Spectrometry Spectrum

    Science.gov (United States)

    Tanc, Beril; Kaya, Mustafa; Gumus, Lokman; Kumral, Mustafa

    2016-04-01

    X-ray fluorescence (XRF) spectrometry is widely used for quantitative and semi quantitative analysis of many major, minor and trace elements in geological samples. Some advantages of the XRF method are; non-destructive sample preparation, applicability for powder, solid, paste and liquid samples and simple spectrum that are independent from chemical state. On the other hand, there are some disadvantages of the XRF methods such as poor sensitivity for low atomic number elements, matrix effect (physical matrix effects, such as fine versus course grain materials, may impact XRF performance) and interference effect (the spectral lines of elements may overlap distorting results for one or more elements). Especially, spectral interferences are very significant factors for accurate results. In this study, semi-quantitative analyzed manganese (II) oxide (MnO, 99.99%) was examined. Samples were pelleted and analyzed with XRF spectrometry (Bruker S8 Tiger). Unexpected peaks were obtained at the side of the major Mn peaks. Although sample does not contain Eu element, in results 0,3% Eu2O3 was observed. These result can occur high concentration of MnO and proximity of Mn and Eu lines. It can be eliminated by using correction equation or Mn concentration can confirm with other methods (such as Atomic absorption spectroscopy). Keywords: Spectral Interferences; Manganese (Mn); Europium (Eu); X-Ray Fluorescence Spectrometry Spectrum.

  2. Performance of fluorescent europium(III) nanoparticles and colloidal gold reporters in lateral flow bioaffinity assay.

    Science.gov (United States)

    Juntunen, Etvi; Myyryläinen, Tiina; Salminen, Teppo; Soukka, Tero; Pettersson, Kim

    2012-09-01

    Lateral flow (LF) immunoassays (i.e., immunochromatographic assays) have traditionally been applied to analytes that do not require very high analytical sensitivity or quantitative results. The selection of potential analytes is often limited by the performance characteristics of the assay technology. Analytes with more demanding sensitivity requirements call for reporter systems enabling high analytical sensitivity. In this study, we systematically compared the performance of fluorescent europium(III) [Eu(III)] chelate dyed polystyrene nanoparticles and colloidal gold particles in lateral flow assays. The effect of time-resolved measurement mode was also studied. Because binder molecules used in immunoassays might not behave similarly when conjugated to different reporter particles, two model assays were constructed to provide reliable technical comparison of the two reporter systems. The comparative experiment demonstrated that the fluorescent nanoparticles yielded 7- and 300-fold better sensitivity compared with colloidal gold in the two test systems, respectively. Although the two reporter particles may induce variable effects using individual binders, overall the high specific activity of Eu(III) nanoparticles has superior potential over colloidal gold particles for the development of robust high-sensitivity bioaffinity assays. Copyright © 2012 Elsevier Inc. All rights reserved.

  3. Carbon nanotube-loaded Nafion film electrochemical sensor for metal ions: europium.

    Science.gov (United States)

    Wang, Tingting; Zhao, Daoli; Guo, Xuefei; Correa, Jaime; Riehl, Bill L; Heineman, William R

    2014-05-06

    A Nafion film loaded with novel catalyst-free multiwalled carbon nanotubes (MWCNTs) was used to modify a glassy carbon (GC) electrode to detect trace concentrations of metal ions, with europium ion (Eu(3+)) as a model. The interaction between the sidewalls of MWCNTs and the hydrophobic backbone of Nafion allows the MWCNTs to be dispersed in Nafion, which was then coated as a thin film on the GC electrode surface. The electrochemical response to Eu(3+) was found to be ∼10 times improved by MWCNT concentrations between 0.5 and 2 mg/mL, which effectively expanded the electrode surface into the Nafion film and thereby reduced the diffusion distance of Eu(3+) to the electrode surface. At low MWCNT concentrations of 0.25 and 0.5 mg/mL, no significant improvement in signal was obtained compared with Nafion alone. Scanning electron microscopy and electrochemical impedance spectroscopy were used to characterize the structure of the MWCNT-Nafion film, followed by electrochemical characterization with Eu(3+) via cyclic voltammetry and preconcentration voltammetry. Under the optimized conditions, a linear range of 1-100 nM with a calculated detection limit of 0.37 nM (signal/noise = 3) was obtained for determination of Eu(3+) by Osteryoung square-wave voltammetry after a preconcentration time of 480 s.

  4. Effects of europium polyoxometalate encapsulated in silica nanoparticles (nanocarriers) in soil invertebrates

    Energy Technology Data Exchange (ETDEWEB)

    Bicho, Rita C., E-mail: ritabicho@ua.pt; Soares, Amadeu M.V.M. [Universidade de Aveiro, Departamento de Biologia & CESAM (Portugal); Nogueira, Helena I.S. [Universidade de Aveiro, Departamento de Química & CICECO (Portugal); Amorim, Mónica J.B. [Universidade de Aveiro, Departamento de Biologia & CESAM (Portugal)

    2016-12-15

    Polyoxometalates (POMs) are metal oxo clusters that have been investigated for several applications in material sciences, catalysis, and biomedicine; these gained increasing interest in the field of nanotechnology as nanocarriers for drug delivery. Associated to the increasing applications, there is the need for information regarding the effects on the environment of these compounds, which is completely absent in the literature. In the present study, the effects of europium polyoxometalates encapsulated into silica nanoparticles (Eu-POM/SiO{sub 2} NPs) were assessed on the soil representative Enchytraeus crypticus. The individual materials were also assessed (Eu-POMs and SiO{sub 2} NPs). Toxicity was evaluated in various test media with increasing complexity: water, soil/water extracts, and soil. Toxicity was only observed for Eu-POM/SiO{sub 2} NPs and in the presence of soil components. Despite the fact that effects were observed for concentrations higher than current predicted environmental concentration (PEC), attention should be given to the growing use of these compounds. The present study shows the importance of assessing the effects in soil media, also compared to water. Moreover, results of “no effect” are critically needed and often unpublished. The present study can contribute to the improvement of the OECD guidelines for safety of manufactured nanomaterials on environmental toxicity in the soil compartment providing an improved test alternative.

  5. EUROPIUM ION INFLUENCE ON THE FORMATION OF Ag-NANOPARTICLES IN FLUORINE PHOSPHATE GLASSES

    Directory of Open Access Journals (Sweden)

    R. O. Pysh'ev

    2015-05-01

    Full Text Available The paper deals with research of formation characteristics of silver nanoparticles in fluorophosphate glasses 0.25 Na2O - 0.5 P2O5 - 0.10 Ga2O3 - 0.075 AlF3 - 0.025 NaF - 0.05 ZnF2 doped with EuF3 (0.8 and 4 wt.% and without them. The synthesis was carried out in closed glassy carbon crucibles in argon atmosphere. Nanoparticles were formed after a low temperature process of Ag+ → Na+ ion-exchange (320 °C and subsequent heat treatment. It was shown that in the initial glasses doped with EuF3, rare earth ions exist in two valence forms (Eu2+ and Eu3+ in dynamic equilibrium and the concentration of Eu2+ increases proportionally to the total concentration of fluoride. It was shown that sizes of molecular clusters or metal nanoparticles depend on the concentration of europium fluoride and duration of ion exchange. The metallic Ag-nanoparticles sizes were defined for different times of heat treatment and ion exchange. The possibility of the stimulating growth of nanoparticles through the introduction of additional EuF3 in the glass was proved. The possibility of obtaining nanoparticles without the heat treatment in glasses with a high concentration of EuF3 was shown. Chemical mechanism for the formation of Ag-nanoparticles during the ion exchange was suggested.

  6. Nanoparticles in the zirconia-europium niobate system via hydrothermal route.

    Science.gov (United States)

    Hirano, Masanori; Dozono, Hayato

    2013-10-01

    The effect of the composition on the hydrothermal formation, structure, and properties of nanocrystalline luminescent materials in the zirconia (ZrO2)-europium niobate 1/4(Eu3NbO7) system was investigated. In the composition range 40 particles with crystallite size 6.0-7.6 nm that were hydrothermally formed from the precursor solutions of NbCl5, ZrOCI2, and EuCl3 under weakly basic conditions at 240 degrees C showed cubic structure. The lattice parameter when estimated as a single cubic phase linearly decreased as the concentration of ZrO2 increased. The presence of zirconia component effectively promoted the formation of nanocrystals containing the niobate, Eu3NbO7 under hydrothermal condition. The nanocrystalline particles could be excited by ultraviolet light 395 nm (f-f transition) and emitted orange (590 nm) and red light (610 nm) corresponding to 5D0 --> 7F1 and 5D0 --> 7F2 transitions of Eu3+, respectively. The intensity of the electric dipole transition (5D0 --> 7F2) that was expressed in values relative to the magnetic dipole transition (5D0 --> 7F1) increased with increased heat-treatment temperature in the range from 950 to 1200 degrees C.

  7. Photoluminescence of monocrystalline and stain-etched porous silicon doped with high temperature annealed europium

    Energy Technology Data Exchange (ETDEWEB)

    Guerrero-Lemus, R; Montesdeoca-Santana, A; Gonzalez-Diaz, B; Diaz-Herrera, B; Hernandez-Rodriguez, C; Jimenez-Rodriguez, E [Departamento de Fisica Basica, Universidad de La Laguna (ULL), Avenida AstrofIsico Francisco Sanchez, 2. 38206 La Laguna, Tenerife (Spain); Velazquez, J J, E-mail: rglemus@ull.es [Departamento de Fisica Fundamental y Experimental, Electronica y Sistemas, Universidad de La Laguna (ULL), Avenida Astrofisico Francisco Sanchez, 2. 38206 La Laguna, Tenerife (Spain)

    2011-08-24

    In this work, for the first time, the photoluminescent emission and excitation spectra of non-textured layers and stain-etched porous silicon layers (PSLs) doped with high temperature annealed europium (Eu) are evaluated. The PSLs are evaluated as a host for rare earth ions and as an antireflection coating. The applied doping process, which consists in a simple impregnation method followed by a high-temperature annealing step, is compatible with the standard processes in the fabrication of solar cells. The results show down-shifting processes with a maximum photoluminescent intensity at 615 nm, related to the transition {sup 5}D{sub 0} {yields} {sup 7}F{sub 2}. Different initial concentrations of Eu(NO{sub 3}){sub 3} are evaluated to study the influence of the rare earth concentration on the photoluminescent intensity. The chemical composition and the morphology of Eu-doped PSLs are examined by means of x-ray dispersion spectroscopy, Fourier-transform infrared spectroscopy and scanning electron microscopy. These Eu-doped layers are considered to be applied as energy converters in silicon-based third generation solar cells.

  8. Europium (III) and Uranium (VI) complexation by natural organic matter (NOM): Effect of source.

    Science.gov (United States)

    Kautenburger, Ralf; Sander, Jonas M; Hein, Christina

    2017-03-01

    For the safe long-term storage of high-level radioactive waste (HLW), detailed information about geo-chemical behavior of radioactive and toxic metal ions under environmental conditions is important. Natural organic matter (NOM) can play a crucial role in the immobilization or mobilization of these metal ions due to its complexation and colloid formation tendency. In this study, the complexation of europium (as chemical homologue of trivalent actinides such as americium) and uranium (as main component of HLW) by ten humic acids (HA) from different sources and Suwannee NOM river extract has been analyzed. Capillary electrophoresis in combination with inductively coupled plasma mass spectrometry has been used for the evaluation of complex stability constants log β. In order to determine the complex stability constants a conservative single site model was used in this study. In dependence of their source and thus of NOM structure the log β values for the analyzed humic acids are in the range of 6.1-7.0 for Eu(III) and 5.2-6.4 for U(VI) (UO 2 2+ ), respectively. In contrast to the results for HA the used Suwannee river NOM reveals log β values in the range of nearly two orders of magnitude lower (4.6 for Eu 3+ and 4.5 for UO 2 2+ ) under the geochemical conditions applied in this study. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Europium incorporated into titanium oxide by the sol-gel method

    Directory of Open Access Journals (Sweden)

    Lucas Alonso Rocha

    2005-09-01

    Full Text Available In this work titanium sol was prepared from tetraethylorthotitanate (TEOT in ethanol, stabilized with beta-diketonate 2,4 pentanedione in molar ratio 1:1 homogenized by magnetic stirring, europium ion was add as structural probe. The xerogels were heat treated at 500, 750 and 1000 °C and the characterization was realized by x-ray diffraction (XRD, transmission electron microscopy (TEM, thermogravimetric analysis (TGA/DSC and photoluminescence (PL. The excitation spectra of Eu (III ion present maximum in 394 nm correspondent to 5L6 level and emission spectra present bands characteristic transitions arising from the 5 D0 -> 7F J (J = 0, 1, 2, 3, 4 manifolds to samples treat at 500 and 750 °C. The Eu (III emission disappear, when heated at 1000 °C, probably due to phase transition anatase to rutile and migrations of ions to the external surface that was proved by x-ray diffraction, transmission electronic microscopy and the thermogravimetric analyses of xerogels.

  10. Luminescence studies on the europium doped strontium metasilicate phosphor prepared by solid state reaction method

    Directory of Open Access Journals (Sweden)

    Ishwar Prasad Sahu

    2017-03-01

    Full Text Available Europium doped strontium meta-silicate (namely SrSiO3:Eu3+ phosphor was prepared by a high temperature solid state reaction method. The sintered SrSiO3:Eu3+ phosphor possesses a monoclinic structure by the XRD. Energy dispersive X-ray spectrum (EDS confirms the presence of elements in the desired sample. Thermoluminescence (TL kinetic parameters such as activation energy (E, order of kinetics (b, and frequency factor (s were calculated by the peak shape method. The orange–red emission was shown to originate from the 5D0–7FJ (J = 0, 1, 2, 3, 4 transitions of Eu3+ ions as the sample was excited at 396 nm. The SrSiO3:Eu3+ phosphor with almost pure orange-red color purity (99.62% shows the quantum efficiency of 10.2% (excited by 396 nm, which is higher than those of commercial red phosphors Y2O3:Eu3+ and Y2O2S:Eu3+ with quantum efficiencies of 9.6% (excited by 394 nm and 4.2% (excited by 395 nm, respectively. Mechanoluminescence (ML intensity of the SrSiO3:Eu3+ phosphor was also found to increase linearly with increasing the impact velocity of the moving piston, suggesting that the discussed phosphor can be used as a stress sensor.

  11. Europium Luminescence Used for Logic Gate and Ions Sensing with Enoxacin As the Antenna.

    Science.gov (United States)

    Lu, Lixia; Chen, Chuanxia; Zhao, Dan; Sun, Jian; Yang, Xiurong

    2016-01-19

    Luminescent lanthanide ion complexes have received increasing attention because of their unique optical properties. Herein, we discovered that the luminescence of europium(III) (Eu(3+)) could be regulated by Ag(+) and SCN(-) in seconds with enoxacin (ENX) as the antenna. Under given conditions, only the simultaneous introduction of Ag(+) and SCN(-) could remarkably enhance the luminescence intensity of Eu(3+)-ENX complexes. This phenomenon has been exploited to design an "AND" logic gate and specific luminescence turn-on assays for sensitively sensing Ag(+) and SCN(-) for the first time. Furthermore, the addition of S(2-) resulted in efficient luminescence quenching of the Eu(3+)/ENX/Ag(+)/SCN(-) system due to the strong affinity between Ag(+) and S(2-). Thus, a new luminescent sensing platform for S(2-) was established, which exhibited excellent selectivity and high sensitivity. S(2-) could be detected within the concentration range of 100 nM to 12.5 μM with a detection limit of 60 nM. Such sensing system features simplicity, rapidity, and flexibility. Moreover, this proposed Eu(3+)-based luminescent assay could be successfully applied in the real environmental water sample analysis.

  12. Radiation effects on beta 10.6 of pure and europium doped KCl

    Science.gov (United States)

    Grimes, H. H.; Maisel, J. E.; Hartford, R. H.

    1975-01-01

    Changes in the optical absorption coefficient as a result of X-ray and electron bombardment of pure KCl (monocrystalline and polycrystalline), and divalent europium doped polycrystalline KCl were determined. The optical absorption coefficients were measured by a constant heat flow calorimetric method. Both 300 KV X-irradiation and 2 MeV electron irradiation produced significant increases in beta 10.6, measured at room temperature. The X-irradiation of pure moncrystalline KCl increased beta 10.6 by 0.005/cm for a 113 MR dose. For an equivalent dose, 2 MeV electrons were found less efficient in changing beta 10.6. However, electron irradiation of pure and Eu-doped polycrystalline KCl produced marked increases in adsorption. Beta increased to over 0.25/cm in Eu-doped material for a 30 x 10 to the 14th power electrons/sq cm dose, a factor of 20 increase over unirradiated material. Moreover, bleaching the electron irradiated doped KCl with 649 m light produced and additional factor of 1.5 increase. These findings will be discussed in light of known defect-center properties in KCl.

  13. Accelerating the clearance of mutant huntingtin protein aggregates through autophagy induction by europium hydroxide nanorods.

    Science.gov (United States)

    Wei, Peng-Fei; Zhang, Li; Nethi, Susheel Kumar; Barui, Ayan Kumar; Lin, Jun; Zhou, Wei; Shen, Yi; Man, Na; Zhang, Yun-Jiao; Xu, Jing; Patra, Chitta Ranjan; Wen, Long-Ping

    2014-01-01

    Autophagy is one of the well-known pathways to accelerate the clearance of protein aggregates, which contributes to the therapy of neurodegenerative diseases. Although there are numerous reports that demonstrate the induction of autophagy with small molecules including rapamycin, trehalose and lithium, however, there are few reports mentioning the clearance of aggregate-prone proteins through autophagy induction by nanoparticles. In the present article, we have demonstrated that europium hydroxide [Eu(III)(OH)3] nanorods can reduce huntingtin protein aggregation (EGFP-tagged huntingtin protein with 74 polyQ repeats), responsible for neurodegenerative diseases. Again, we have found that these nanorods induce authentic autophagy flux in different cell lines (Neuro 2a, PC12 and HeLa cells) through the expression of higher levels of characteristic autophagy marker protein LC3-II and degradation of selective autophagy substrate/cargo receptor p62/SQSTM1. Furthermore, depression of protein aggregation clearance through the autophagy blockade has also been observed by using specific inhibitors (wortmannin and chloroquine), indicating that autophagy is involved in the degradation of huntingtin protein aggregation. Since [Eu(III)(OH)3] nanorods can enhance the degradation of huntingtin protein aggregation via autophagy induction, we strongly believe that these nanorods would be useful for the development of therapeutic treatment strategies for various neurodegenerative diseases in near future using nanomedicine approach. Copyright © 2013 Elsevier Ltd. All rights reserved.

  14. High-resolution Thermal Micro-imaging Using Europium Chelate Luminescent Coatings.

    Science.gov (United States)

    Benseman, Timothy M; Hao, Yang; Vlasko-Vlasov, Vitalii K; Welp, Ulrich; Koshelev, Alexei E; Kwok, Wai-Kwong; Divan, Ralu; Keiser, Courtney; Watanabe, Chiharu; Kadowaki, Kazuo

    2017-04-16

    Micro-electronic devices often undergo significant self-heating when biased to their typical operating conditions. This paper describes a convenient optical micro-imaging technique which can be used to map and quantify such behavior. Europium thenoyltrifluoroacetonate (EuTFC) has a 612 nm luminescence line whose activation efficiency drops strongly with increasing temperature, due to T-dependent interactions between the Eu3+ ion and the organic chelating compound. This material may be readily coated on to a sample surface by thermal sublimation in vacuum. When the coating is excited with ultraviolet light (337 nm) an optical micro-image of the 612 nm luminescent response can be converted directly into a map of the sample surface temperature. This technique offers spatial resolution limited only by the microscope optics (about 1 micron) and time resolution limited by the speed of the camera employed. It offers the additional advantages of only requiring comparatively simple and non-specialized equipment, and giving a quantitative probe of sample temperature.

  15. In vivo synthesis of europium selenide nanoparticles and related cytotoxicity evaluation of human cells.

    Science.gov (United States)

    Kim, Eun Bee; Seo, Ji Min; Kim, Gi Wook; Lee, Sang Yup; Park, Tae Jung

    2016-12-01

    Nanotechnology strives to combine new materials for development of noble nanoparticles. As the nanoparticles exhibit unique optical, electronic, and magnetic properties depending on their composition, developing safe, cost-effective and environmentally friendly technologies for the synthesis have become an important issue. In this study, in vivo synthesis of europium selenide (EuSe) nanoparticles was performed using recombinant Escherichia coli cells expressing heavy-metal binding proteins, phytochelatin synthase and metallothionein. The formation of EuSe nanoparticles was confirmed by using UV-vis spectroscopy, spectrofluorometry, X-ray diffraction, energy dispersive X-ray and transmission electron microscopy. The synthesized EuSe nanoparticles exhibited high fluorescence intensities as well as strong magnetic properties. Furthermore, anti-cancer effect of EuSe nanoparticles against cancer cell lines was investigated. This strategy for the biogenic synthesis of nanoparticles has a great potential as bioimaging tools and drug carrying agents in biomedical fields due to its simplicity and nontoxicity. Copyright © 2016 Elsevier Inc. All rights reserved.

  16. Circularly Polarized Luminescence in Enantiopure Europium and Terbium Complexes with Modular, All-Oxygen Donor Ligands

    Science.gov (United States)

    Seitz, Michael; Do, King; Ingram, Andrew J.; Moore, Evan G.; Muller, Gilles; Raymond, Kenneth N.

    2009-01-01

    Abstract: Circulaly polarized luminescence from terbium(III) complexed and excited by chiral antenna ligands gives strong emission The modular synthesis of three new octadentate, enantiopure ligands are reported - one with the bidentate chelating unit 2-hydroxyisophthalamide (IAM) and two with 1-hydroxy-2-pyridinone (1,2-HOPO) units. A new design principle is introduced for the chiral, non-racemic hexamines which constitute the central backbones for the presented class of ligands. The terbium(III) complex of the IAM ligand, as well as the europium(III) complexes of the 1,2-HOPO ligands are synthesized and characterized by various techniques (NMR, UV, CD, luminescence spectroscopy). All species exhibit excellent stability and moderate to high luminescence efficiency (quantum yields ΦEu = 0.05–0.08 and ΦTb = 0.30–0.57) in aqueous solution at physiological pH. Special focus is put onto the properties of the complexes in regard to circularly polarized luminescence (CPL). The maximum luminescence dissymmetry factors (glum) in aqueous solution are high with |glum|max = 0.08 – 0.40. Together with the very favorable general properties (good stability, high quantum yields, long lifetimes), the presented lanthanide complexes can be considered as good candidates for analytical probes based on CPL in biologically relevant environments. PMID:19639983

  17. Complexation and molecular modeling studies of europium(III)-gallic acid-amino acid complexes.

    Science.gov (United States)

    Taha, Mohamed; Khan, Imran; Coutinho, João A P

    2016-04-01

    With many metal-based drugs extensively used today in the treatment of cancer, attention has focused on the development of new coordination compounds with antitumor activity with europium(III) complexes recently introduced as novel anticancer drugs. The aim of this work is to design new Eu(III) complexes with gallic acid, an antioxida'nt phenolic compound. Gallic acid was chosen because it shows anticancer activity without harming health cells. As antioxidant, it helps to protect human cells against oxidative damage that implicated in DNA damage, cancer, and accelerated cell aging. In this work, the formation of binary and ternary complexes of Eu(III) with gallic acid, primary ligand, and amino acids alanine, leucine, isoleucine, and tryptophan was studied by glass electrode potentiometry in aqueous solution containing 0.1M NaNO3 at (298.2 ± 0.1) K. Their overall stability constants were evaluated and the concentration distributions of the complex species in solution were calculated. The protonation constants of gallic acid and amino acids were also determined at our experimental conditions and compared with those predicted by using conductor-like screening model for realistic solvation (COSMO-RS) model. The geometries of Eu(III)-gallic acid complexes were characterized by the density functional theory (DFT). The spectroscopic UV-visible and photoluminescence measurements are carried out to confirm the formation of Eu(III)-gallic acid complexes in aqueous solutions. Copyright © 2016 Elsevier Inc. All rights reserved.

  18. Luminescent single-walled carbon nanotube-sensitized europium nanoprobes for cellular imaging

    Science.gov (United States)

    Avti, Pramod K; Sitharaman, Balaji

    2012-01-01

    Lanthanoid-based optical probes with excitation wavelengths in the ultra-violet (UV) range (300–325 nm) have been widely developed as imaging probes. Efficient cellular imaging requires that lanthanoid optical probes be excited at visible wavelengths, to avoid UV damage to cells. The efficacy of europium-catalyzed single-walled carbon nanotubes (Eu-SWCNTs), as visible nanoprobes for cellular imaging, is reported in this study. Confocal fluorescence microscopy images of breast cancer cells (SK-BR-3 and MCF-7) and normal cells (NIH 3T3), treated with Eu-SWCNT at 0.2 μg/mL concentration, showed bright red luminescence after excitation at 365 nm and 458 nm wavelengths. Cell viability analysis showed no cytotoxic effects after the incubation of cells with Eu-SWCNTs at this concentration. Eu-SWCNT uptake is via the endocytosis mechanism. Labeling efficiency, defined as the percentage of incubated cells that uptake Eu-SWCNT, was 95%–100% for all cell types. The average cellular uptake concentration was 6.68 ng Eu per cell. Intracellular localization was further corroborated by transmission electron microscopy and Raman microscopy. The results indicate that Eu-SWCNT shows potential as a novel cellular imaging probe, wherein SWCNT sensitizes Eu3+ ions to allow excitation at visible wavelengths, and stable time-resolved red emission. The ability to functionalize biomolecules on the exterior surface of Eu-SWCNT makes it an excellent candidate for targeted cellular imaging. PMID:22619533

  19. Europium(III) DOTA-derivatives having ketone donor pendant arms display dramatically slower water exchange

    Science.gov (United States)

    Green, Kayla N.; Viswanathan, Subha; Rojas-Quijano, Federico A.; Kovacs, Zoltan; Sherry, A. Dean

    2011-01-01

    A series of new 1,4,7,10-tetraazacyclododecane-derivatives having a combination of amide and ketone donor groups as side-arms were prepared and their complexes with europium(III) studied in detail by high resolution NMR spectroscopy. The chemical shift of the Eu3+-bound water resonance, the chemical exchange saturation transfer (CEST) characteristics of the complexes, and the bound water residence lifetimes (τm) were found to vary dramatically with the chemical structure of the side-arms. Substitution of ketone oxygen donor atoms for amide oxygen donor atoms resulted in an increase in residence water lifetimes (τm) and a decrease in chemical shift of the Eu3+-bound water molecule (Δω). These experimental results along with density functional theory (DFT) calculations demonstrate that introduction of weakly donating oxygen atoms in these complexes results in a much weaker ligand field, more positive charge on the Eu3+ ion and an increased water residence lifetime as expected for a dissociative mechanism. These results provide new insights into the design of paramagnetic CEST agents with even slower water exchange kinetics that will make them more efficient for in vivo imaging applications. PMID:21306137

  20. Urinary monitoring of exposure to yttrium, scandium, and europium in male Wistar rats.

    Science.gov (United States)

    Kitamura, Yasuhiro; Usuda, Kan; Shimizu, Hiroyasu; Fujimoto, Keiichi; Kono, Rei; Fujita, Aiko; Kono, Koichi

    2012-12-01

    On the assumption that rare earth elements (REEs) are nontoxic, they are being utilized as replacements of toxic heavy metals in novel technological applications. However, REEs are not entirely innocuous, and their impact on health is still uncertain. In the past decade, our laboratory has studied the urinary excretion of REEs in male Wistar rats given chlorides of europium, scandium, and yttrium solutions by one-shot intraperitoneal injection or oral dose. The present paper describes three experiments for the suitability and appropriateness of a method to use urine for biological monitoring of exposure to these REEs. The concentrations of REEs were determined in cumulative urine samples taken at 0-24 h by inductively coupled plasma atomic emission spectroscopy, showing that the urinary excretion of REEs is <2 %. Rare earth elements form colloidal conjugates in the bloodstream, which make high REEs accumulation in the reticuloendothelial system and glomeruli and low urinary excretion. The high sensitivity of inductively coupled plasma-argon emission spectrometry analytical methods, with detection limits of <2 μg/L, makes urine a comprehensive assessment tool that reflects REE exposure. The analytical method and animal experimental model described in this study will be of great importance and encourage further discussion for future studies.

  1. Europium Luminescence: Electronic Densities and Superdelocalizabilities for a Unique Adjustment of Theoretical Intensity Parameters

    Science.gov (United States)

    Dutra, José Diogo L.; Lima, Nathalia B. D.; Freire, Ricardo O.; Simas, Alfredo M.

    2015-09-01

    We advance the concept that the charge factors of the simple overlap model and the polarizabilities of Judd-Ofelt theory for the luminescence of europium complexes can be effectively and uniquely modeled by perturbation theory on the semiempirical electronic wave function of the complex. With only three adjustable constants, we introduce expressions that relate: (i) the charge factors to electronic densities, and (ii) the polarizabilities to superdelocalizabilities that we derived specifically for this purpose. The three constants are then adjusted iteratively until the calculated intensity parameters, corresponding to the 5D0→7F2 and 5D0→7F4 transitions, converge to the experimentally determined ones. This adjustment yields a single unique set of only three constants per complex and semiempirical model used. From these constants, we then define a binary outcome acceptance attribute for the adjustment, and show that when the adjustment is acceptable, the predicted geometry is, in average, closer to the experimental one. An important consequence is that the terms of the intensity parameters related to dynamic coupling and electric dipole mechanisms will be unique. Hence, the important energy transfer rates will also be unique, leading to a single predicted intensity parameter for the 5D0→7F6 transition.

  2. Structural and spectroscopic analyses of europium doped yttrium oxyfluoride powders prepared by combustion synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Rakov, Nikifor [PG-Ciência dos Materiais, Universidade Federal do Vale do São Francisco, 48902-300 Juazeiro, BA (Brazil); Guimarães, R. B.; Maciel, Glauco S. [Instituto de Física, Universidade Federal Fluminense, 24210-346 Niterói, RJ (Brazil); Lozano B, W. [Departamento de Física, Universidade Federal de Pernambuco, 50670-901 Recife, PE (Brazil)

    2013-07-28

    A facile widely spread technique employed to produce low-cost high-yield oxide powders, combustion synthesis, was used to prepare yttrium oxyfluoride crystalline ceramic powders. The structure of the powders was analyzed by X-ray powder diffraction and Rietveld refinement. Samples heat treated at 700 °C had a predominance of vernier orthorhombic Y{sub 6}O{sub 5}F{sub 8} phase, while samples heat treated at 800 °C crystallized in stoichiometric rhombohedral YOF phase. The samples were doped with luminescent europium trivalent ions (Eu{sup 3+}) in different concentrations (1–15 wt.%) and Judd-Ofelt theory was used to probe the distortion from the inversion symmetry of the local crystal field and the degree of covalency between the rare-earth ion and the surrounding ligands. The luminescence lifetime was measured and the luminescence quantum efficiency (LQE) was estimated. We observed that Eu{sup 3+}:Y{sub 6}O{sub 5}F{sub 8} samples presented higher LQE in spite of the larger local crystal field anisotropy found for Eu{sup 3+}:YOF samples.

  3. Development and Processing of Nickel Aluminide-Carbide Alloys

    Science.gov (United States)

    Newport, Timothy Scott

    1996-01-01

    With the upper temperature limit of the Ni-based superalloys attained, a new class of materials is required. Intermetallics appear as likely candidates because of their attractive physical properties. With a relatively low density, high thermal conductivity, excellent oxidation resistance, high melting point, and simple crystal structure, nickel aluminide (NiAl) appears to be a potential candidate. However, NiAl is limited in structural applications due to its low room temperature fracture toughness and poor elevated temperature strength. One approach to improving these properties has been through the application of eutectic composites. Researchers have shown that containerless directional solidification of NiAl-based eutectic alloys can provide improvement in both the creep strength and fracture toughness. Although these systems have shown improvements in the mechanical properties, the presence of refractory metals increases the density significantly in some alloys. Lower density systems, such as the carbides, nitrides, and borides, may provide NiAl-based eutectic structure. With little or no information available on these systems, experimental investigation is required. The objective of this research was to locate and develop NiAl-carbide eutectic alloys. Exploratory arc-melts were performed in NiAl-refractory metal-C systems. Refractory metal systems investigated included Co, Cr, Fe, Hf, Mo, Nb, Ta, Ti, W, and Zr. Systems containing carbides with excellent stability (i.e.,HfC, NbC, TaC, TiC, and ZrC) produced large blocky cubic carbides in an NiAl matrix. The carbides appeared to have formed in the liquid state and were randomly distributed throughout the polycrystalline NiAl. The Co, Cr, Fe, Mo, and W systems contained NiAl dendrites with a two-phase interdendritic microconstituent present. Of these systems, the NiAl-Mo-C system had the most promising microstructure for in-situ composites. Three processing techniques were used to evaluate the NiAl-Mo-C system

  4. Novel fabrication of silicon carbide based ceramics for nuclear applications

    Science.gov (United States)

    Singh, Abhishek Kumar

    Advances in nuclear reactor technology and the use of gas-cooled fast reactors require the development of new materials that can operate at the higher temperatures expected in these systems. These materials include refractory alloys based on Nb, Zr, Ta, Mo, W, and Re; ceramics and composites such as SiC--SiCf; carbon--carbon composites; and advanced coatings. Besides the ability to handle higher expected temperatures, effective heat transfer between reactor components is necessary for improved efficiency. Improving thermal conductivity of the fuel can lower the center-line temperature and, thereby, enhance power production capabilities and reduce the risk of premature fuel pellet failure. Crystalline silicon carbide has superior characteristics as a structural material from the viewpoint of its thermal and mechanical properties, thermal shock resistance, chemical stability, and low radioactivation. Therefore, there have been many efforts to develop SiC based composites in various forms for use in advanced energy systems. In recent years, with the development of high yield preceramic precursors, the polymer infiltration and pyrolysis (PIP) method has aroused interest for the fabrication of ceramic based materials, for various applications ranging from disc brakes to nuclear reactor fuels. The pyrolysis of preceramic polymers allow new types of ceramic materials to be processed at relatively low temperatures. The raw materials are element-organic polymers whose composition and architecture can be tailored and varied. The primary focus of this study is to use a pyrolysis based process to fabricate a host of novel silicon carbide-metal carbide or oxide composites, and to synthesize new materials based on mixed-metal silicocarbides that cannot be processed using conventional techniques. Allylhydridopolycarbosilane (AHPCS), which is an organometal polymer, was used as the precursor for silicon carbide. Inert gas pyrolysis of AHPCS produces near-stoichiometric amorphous

  5. SILICON CARBIDE CERAMICS FOR COMPACT HEAT EXCHANGERS

    Energy Technology Data Exchange (ETDEWEB)

    DR. DENNIS NAGLE; DR. DAJIE ZHANG

    2009-03-26

    Silicon carbide (SiC) materials are prime candidates for high temperature heat exchangers for next generation nuclear reactors due to their refractory nature and high thermal conductivity at elevated temperatures. This research has focused on demonstrating the potential of liquid silicon infiltration (LSI) for making SiC to achieve this goal. The major advantage of this method over other ceramic processing techniques is the enhanced capability of making high dense, high purity SiC materials in complex net shapes. For successful formation of net shape SiC using LSI techniques, the carbon preform reactivity and pore structure must be controlled to allow the complete infiltration of the porous carbon structure which allows complete conversion of the carbon to SiC. We have established a procedure for achieving desirable carbon properties by using carbon precursors consisting of two readily available high purity organic materials, crystalline cellulose and phenolic resin. Phenolic resin yields a glassy carbon with low chemical reactivity and porosity while the cellulose carbon is highly reactive and porous. By adjusting the ratio of these two materials in the precursor mixtures, the properties of the carbons produced can be controlled. We have identified the most favorable carbon precursor composition to be a cellulose resin mass ratio of 6:4 for LSI formation of SiC. The optimum reaction conditions are a temperature of 1800 C, a pressure of 0.5 Torr of argon, and a time of 120 minutes. The fully dense net shape SiC material produced has a density of 2.96 g cm{sup -3} (about 92% of pure SiC) and a SiC volume fraction of over 0.82. Kinetics of the LSI SiC formation process was studied by optical microscopy and quantitative digital image analysis. This study identified six reaction stages and provided important understanding of the process. Although the thermal conductivity of pure SiC at elevated temperatures is very high, thermal conductivities of most commercial Si

  6. Synthesis, photophysics, electrochemistry, thermal stability and electroluminescent performances of a new europium complex with bis(β-diketone) ligand containing carbazole group.

    Science.gov (United States)

    Liu, Jian; Liang, Quan-Bin; Wu, Hong-Bin

    2017-05-01

    We synthesized a new europium complex [Eu(ecbpd)3 (Phen)] with bis(β-diketone) ligand containing a carbazole group, in which ecbpd and Phen are dehydro-3,3'-(9-ethyl-9H-carbazole-3,6-diyl)bis(1-phenylpropane-1,3-dione) and 1,10-phenanthroline, respectively. Its UV/vis and photoluminescent spectra, quantum yield, luminescence lifetime, electrochemistry, thermal stability and electroluminescent performances were studied. This europium complex showed low efficiency luminescence, which is probably due to the mismatching energy levels of its ligand and Eu3+ , as well as the double Eu3+ core resonance. Copyright © 2016 John Wiley & Sons, Ltd.

  7. Determination of thorium in plutonium-thorium oxides and carbides

    Energy Technology Data Exchange (ETDEWEB)

    Walker, L.F.; Temer, D.J.

    1979-10-01

    Thorium is determined in (PuTh)C and (PuTh)O/sub 2/ by complexometric titration with ethylenediaminetetraacetic acid (EDTA) following separation on anion-exchange resin. Carbides are first oxidized by ignition in air at about 800/sup 0/C. Oxide or oxidized carbide samples are dissolved in acids by the sealed-reflux technique or by heating in beakers. The plutonium is selectively sorbed from the 12M hydrochloric acid solution of the fuel on a Bio-Rad AG1-X2 anion-exchange resin column, and the eluted thorium is titrated with EDTA using xylenol orange as the indicator. The average recovery of thorium in 20 samples is 99.98% with a relative standard deviation of 0.07%.

  8. PREPARATION OF TANTALUM CARBIDE FROM AN ORGANOMETALLIC PRECURSOR

    Directory of Open Access Journals (Sweden)

    SOUZA C. P.

    1999-01-01

    Full Text Available In this work we have synthesized an organometallic oxalic precursor from tantalum oxide. This oxide was solubilized by heating with potassium hydrogen sulfate. In order to precipitate Ta2O5.nH2O, the fused mass obtained was dissolved in a sulfuric acid solution and neutralized with ammonia. The hydrated tantalum oxide precipitated was dissolved in an equimolar solution of oxalic acid/ammonium oxalate. The synthesis and the characterization of the tantalum oxalic precursor are described. Pyrolysis of the complex in a mixture of hydrogen and methane at atmospheric pressure was studied. The gas-solid reaction made it possible to obtain tantalum carbide, TaC, in the powder form at 1000oC. The natural sintering of TaC powder in an inert atmosphere at 1400°C during 10 hours, under inert atmosphere made it possible to densify the carbide to 96% of the theoretical value.

  9. Linear electro-optic effect in cubic silicon carbide

    Science.gov (United States)

    Tang, Xiao; Irvine, Kenneth G.; Zhang, Dongping; Spencer, Michael G.

    1991-01-01

    The first observation is reported of the electrooptic effect of cubic silicon carbide (beta-SiC) grown by a low-pressure chemical vapor deposition reactor using the hydrogen, silane, and propane gas system. At a wavelength of 633 nm, the value of the electrooptic coefficient r41 in beta-SiC is determined to be 2.7 +/- 0.5 x 10 (exp-12) m/V, which is 1.7 times larger than that in gallium arsenide measured at 10.6 microns. Also, a half-wave voltage of 6.4 kV for beta-SiC is obtained. Because of this favorable value of electrooptic coefficient, it is believed that silicon carbide may be a promising candidate in electrooptic applications for high optical intensity in the visible region.

  10. Scalable Quantum Photonics with Single Color Centers in Silicon Carbide.

    Science.gov (United States)

    Radulaski, Marina; Widmann, Matthias; Niethammer, Matthias; Zhang, Jingyuan Linda; Lee, Sang-Yun; Rendler, Torsten; Lagoudakis, Konstantinos G; Son, Nguyen Tien; Janzén, Erik; Ohshima, Takeshi; Wrachtrup, Jörg; Vučković, Jelena

    2017-03-08

    Silicon carbide is a promising platform for single photon sources, quantum bits (qubits), and nanoscale sensors based on individual color centers. Toward this goal, we develop a scalable array of nanopillars incorporating single silicon vacancy centers in 4H-SiC, readily available for efficient interfacing with free-space objective and lensed-fibers. A commercially obtained substrate is irradiated with 2 MeV electron beams to create vacancies. Subsequent lithographic process forms 800 nm tall nanopillars with 400-1400 nm diameters. We obtain high collection efficiency of up to 22 kcounts/s optical saturation rates from a single silicon vacancy center while preserving the single photon emission and the optically induced electron-spin polarization properties. Our study demonstrates silicon carbide as a readily available platform for scalable quantum photonics architecture relying on single photon sources and qubits.

  11. Functionalization and cellular uptake of boron carbide nanoparticles

    DEFF Research Database (Denmark)

    Mortensen, M. W.; Björkdahl, O.; Sørensen, P. G.

    2006-01-01

    In this paper we present surface modification strategies of boron carbide nanoparticles, which allow for bioconjugation of the transacting transcriptional activator (TAT) peptide and fluorescent dyes. Coated nanoparticles can be translocated into murine EL4 thymoma cells and B16 F10 malignant...... melanoma cells in amounts as high as 0.3 wt. % and 1 wt. %, respectively. Neutron irradiation of a test system consisting of untreated B16 cells mixed with B16 cells loaded with boron carbide nanoparticles were found to inhibit the proliferative capacity of untreated cells, showing that cells loaded...... with boron-containing nanoparticles can hinder the growth of neighboring cells upon neutron irradiation. This could provide the first step toward a T cell-guided boron neutron capture therapy....

  12. Scalable Quantum Photonics with Single Color Centers in Silicon Carbide

    Science.gov (United States)

    Radulaski, Marina; Widmann, Matthias; Niethammer, Matthias; Zhang, Jingyuan Linda; Lee, Sang-Yun; Rendler, Torsten; Lagoudakis, Konstantinos G.; Son, Nguyen Tien; Janzén, Erik; Ohshima, Takeshi; Wrachtrup, Jörg; Vučković, Jelena

    2017-03-01

    Silicon carbide is a promising platform for single photon sources, quantum bits (qubits) and nanoscale sensors based on individual color centers. Towards this goal, we develop a scalable array of nanopillars incorporating single silicon vacancy centers in 4H-SiC, readily available for efficient interfacing with free-space objective and lensed-fibers. A commercially obtained substrate is irradiated with 2 MeV electron beams to create vacancies. Subsequent lithographic process forms 800 nm tall nanopillars with 400-1,400 nm diameters. We obtain high collection efficiency, up to 22 kcounts/s optical saturation rates from a single silicon vacancy center, while preserving the single photon emission and the optically induced electron-spin polarization properties. Our study demonstrates silicon carbide as a readily available platform for scalable quantum photonics architecture relying on single photon sources and qubits.

  13. Alternative catalytic materials: carbides, nitrides, phosphides and amorphous boron alloys.

    Science.gov (United States)

    Alexander, Anne-Marie; Hargreaves, Justin S J

    2010-11-01

    Catalysts generated by the addition of carbon, nitrogen or phosphorus to transition metals have interesting properties and potential applications. The addition of carbon, nitrogen or phosphorus can lead to substantial modification of the catalytic efficacy of the parent metal and some carbides and nitrides are claimed to be comparable to noble metals in their behaviour. Amorphous boron transition metal alloys are also a class of interesting catalyst, although their structures and phase composition are more difficult to define. In this critical review, the preparation of these catalysts is described and brief details of their application given. To date, attention has largely centred upon the application of these materials as alternatives for existing catalysts. However, novel approaches towards their utilisation can be envisaged. For example, the extent to which it is possible to utilise the "activated" carbon and nitrogen species within the host lattices of carbides and nitrides, respectively, as a reactant remains largely unexplored (195 references).

  14. Anodic etching of p-type cubic silicon carbide

    Science.gov (United States)

    Harris, G. L.; Fekade, K.; Wongchotigul, K.

    1992-01-01

    p-Type cubic silicon carbide was anodically etched using an electrolyte of HF:HCl:H2O. The etching depth was determined versus time with a fixed current density of 96.4 mA/sq cm. It was found that the etching was very smooth and very uniform. An etch rate of 22.7 nm/s was obtained in a 1:1:50 HF:HCl:H2O electrolyte.

  15. Silicon Carbide as a Material for Biomedical Microsystems

    OpenAIRE

    Zorman, Ch.,

    2009-01-01

    ISBN: 978-2-35500-009-6; Silicon Carbide (SiC) is emerging as an enabling material for biomedical microsystems due to its uniquecombination of electrical, mechanical and chemical properties combined with its compatibility with Simicromachining techniques. This paper presents an overview of the latest advancements in this areaincluding on-going research to develop SiC for biosensing, bio-microdevice packaging, bio-filtering,biomedical imaging and other related biomedical applications.

  16. Method of making carbide/fluoride/silver composites

    Science.gov (United States)

    Sliney, Harold E. (Inventor); Dellacorte, Christopher (Inventor)

    1991-01-01

    A composition containing 30 to 70 percent chromium carbide, 5 to 20 percent soft noble metal, 5 to 20 percent metal fluorides, and 20 to 60 percent metal binder is used in a powdered metallurgy process for the production of self-lubricating components, such as bearings. The use of the material allows the self-lubricating bearing to maintain its low friction properties over an extended range of operating temperatures.

  17. Progress in Studies on Carbon and Silicon Carbide Nanocomposite Materials

    Directory of Open Access Journals (Sweden)

    Peng Xiao

    2010-01-01

    Full Text Available Silicon carbide nanofiber and carbon nanotubes are introduced. The structure and application of nanotubers (nanofibers in carbon/carbon composites are emphatically presented. Due to the unique structure of nanotubers (nanofibers, they can modify the microstructure of pyrocarbon and induce the deposition of pyrocarbon with high text in carbon/carbon composites. So the carbon/carbon composites modified by CNT/CNF have more excellent properties.

  18. Catalytic Conversion of Syngas into Higher Alcohols over Carbide Catalysts

    DEFF Research Database (Denmark)

    Christensen, Jakob Munkholt; Duchstein, Linus Daniel Leonhard; Wagner, Jakob Birkedal

    2012-01-01

    This work investigates the use of the bulk carbides Mo2C, WC, and NbC as catalysts for the conversion of syngas into higher alcohols. K2CO3/WC produces mainly CH3OH and CH4 with a low activity. NbC has a very low activity in CO hydrogenation. K2CO3/Mo2C produces mixed alcohols with a reasonable...

  19. Epitaxial Growth of Silicon Carbide by Chemical Vapor Deposition

    Science.gov (United States)

    Bhat, Ishwara B.

    The properties of silicon carbide materials are first reviewed, with special emphasis on properties related to power device applications. Epitaxial growth methods for SiC are then discussed with emphasis on recent results for epitaxial growth by the hot-wall chemical vapor deposition method. The growth mechanism for maintaining the polytype, namely step-controlled epitaxy, is discussed. Also described is the selective epitaxial growth carried out on SiC at the author's laboratory, including some unpublished work.

  20. Production of boron carbide powder by carbothermal synthesis of ...

    Indian Academy of Sciences (India)

    Boron carbide (B4C) powder has been produced by carbothermal reduction of boric acid–citric acid gel. Initially a gel of boric acid–citric acid is prepared in an oven at 100°C. This gel is pyrolyzed in a high temperature furnace over a temperature range of 1000–1800°C. The reaction initiation temperature range for B4C ...

  1. Phonon spectrum, mechanical and thermophysical properties of thorium carbide

    Energy Technology Data Exchange (ETDEWEB)

    Pérez Daroca, D., E-mail: pdaroca@tandar.cnea.gov.ar [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica (Argentina); Consejo Nacional de Investigaciones Cientı´ficas y Técnicas (Argentina); Jaroszewicz, S. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica (Argentina); Instituto de Tecnología Jorge A. Sabato, UNSAM-CNEA (Argentina); Llois, A.M. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica (Argentina); Consejo Nacional de Investigaciones Cientı´ficas y Técnicas (Argentina); Mosca, H.O. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica (Argentina); Instituto de Tecnología Jorge A. Sabato, UNSAM-CNEA (Argentina)

    2013-06-15

    In this work, we study, by means of density functional perturbation theory and the pseudopotential method, mechanical and thermophysical properties of thorium carbide. These properties are derived from the lattice dynamics in the quasi-harmonic approximation. The phonon spectrum of ThC presented in this article, to the best authors’ knowledge, have not been studied, neither experimentally, nor theoretically. We compare mechanical properties, volume thermal expansion and molar specific capacities with previous results and find a very good agreement.

  2. Adhesion of CVD coatings on new cemeted carbides

    OpenAIRE

    Bojestig, Eric

    2016-01-01

    Steel turning inserts cemented carbides have a binder phase consisting of cobalt (Co). However, in recent years a study from the United States National Toxicity Program (NTP) found that cobalt powder is carcinogenic upon inhalation. The European Union's REACH have therefore also classified cobalt powder as carcinogenic upon inhalation. The worldwide search to find a replacement has therefore lately intensified. It is important that the alternative binder phase has no negative effects on the p...

  3. Microstructural studies of carbides in MAR-M247 nickel-based superalloy

    Science.gov (United States)

    Szczotok, A.; Rodak, K.

    2012-05-01

    Carbides play an important role in the strengthening of microstructures of nickel-based superalloys. Grain boundary carbides prevent or retard grain-boundary sliding and make the grain boundary stronger. Carbides can also tie up certain elements that would otherwise promote phase instability during service. Various types of carbides are possible in the microstructure of nickel-based superalloys, depending on the superalloy composition and processing. In this paper, scanning electron and scanning transmission electron microscopy studies of carbides occurring in the microstructure of polycrystalline MAR-M247 nickel-based superalloy were carried out. In the present work, MC and M23C6 carbides in the MAR-M247 microstructure were examined.

  4. Effect of Cement Replacement with Carbide Waste on the Strength of Stabilized Clay Subgrade

    Directory of Open Access Journals (Sweden)

    Muntohar A.S.

    2016-03-01

    Full Text Available Cement is commonly used for soil stabilization and many other ground improvement techniques. Cement is believed to be very good to improve the compressive and split-tensile strength of clay subgrades. In some application cement could be partly or fully replaced with carbide waste. This research is to study the effectiveness of the cement replacement and to find the maximum carbide waste content to be allowed for a clay subgrade. The quantities of cement replaced with the carbide waste were 30, 50, 70, 90, and 100% by its mass. The results show that replacing the cement with carbide waste decreased both the compressive and split tensile strength. Replacing cement content with carbide waste reduced its ability for stabilization. The carbide waste content should be less than 70% of the cement to provide a sufficient stabilizing effect on a clay subgrade.

  5. Europium (III) PVC membrane sensor based on N-pyridine-2-carboxamido-8-aminoquinoline as a sensing material

    Energy Technology Data Exchange (ETDEWEB)

    Zamani, Hassan Ali, E-mail: haszamani@yahoo.com [Department of Applied Chemistry, Quchan branch, Islamic Azad University, Quchan (Iran, Islamic Republic of); Kamjoo, Rahman [Department of Applied Chemistry, Quchan branch, Islamic Azad University, Quchan (Iran, Islamic Republic of); Mohammadhosseini, Majid [Department of Chemistry, Faculty of Basic Sciences, Shahrood Branch, Islamic Azad University, Shahrood (Iran, Islamic Republic of); Zaferoni, Mojdeh; Rafati, Zynab [Department of Applied Chemistry, Quchan branch, Islamic Azad University, Quchan (Iran, Islamic Republic of); Ganjali, Mohammad Reza [Center of Excellence in Electrochemistry, Faculty of Chemistry, University of Tehran, Tehran (Iran, Islamic Republic of); Endocrinology and Metabolism Research Center, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Faridbod, Farnoush [Endocrinology and Metabolism Research Center, Tehran University of Medical Sciences, Tehran (Iran, Islamic Republic of); Meghdadi, Soraia [Department of Chemistry, Isfahan University of Technology, Isfahan 84156-83111 (Iran, Islamic Republic of)

    2012-04-01

    Conductometric study in acetonitrile solution shows the selectivity of PCQ toward europium ion. Therefore, a new europium PVC membrane electrode was prepared based on N-pyridine-2-carboxamido-8-aminoquinoline (PCQ) as an ion carrier. The electrode has a wide concentration range from 1.0 Multiplication-Sign 10{sup -2} and 1.0 Multiplication-Sign 10{sup -6} mol L{sup -1}, Nernstian slope of 19.8 {+-} 0.3 mV per decade and a detection limit of 6.4 Multiplication-Sign 10{sup -7} mol L{sup -1}. The potentiometric response is pH independent in the range of 2.4-7.4. The proposed sensor has a relatively fast response time less than 10 s and it can be used for at least 2 months without any considerable divergence in its potentials. The proposed electrode revealed good selectivity toward europium ion in comparison with variety of other metal ions. The practical utility of the electrodes has been demonstrated by their use as indicator electrodes in the potentiometric titration of Eu{sup 3+} ions with EDTA and for determination of Eu{sup 3+} ion concentration in mixtures of two and three different ions. - Highlights: Black-Right-Pointing-Pointer A new ion carrier is introduced to preparation of a selective sensor for Eu{sup 3+} ions. Black-Right-Pointing-Pointer This technique is very simple and it's not necessary to use sophisticated equipment. Black-Right-Pointing-Pointer The novelty of this work is the high affinity of the ionophore toward the Eu{sup 3+} ions. Black-Right-Pointing-Pointer The sensor is superior to the formerly reported Eu{sup 3+} sensors in terms of selectivity.

  6. A novel tridentate bis(phosphinic acid)phosphine oxide based europium(III)-selective Nafion membrane luminescent sensor.

    Science.gov (United States)

    Sainz-Gonzalo, F J; Popovici, C; Casimiro, M; Raya-Barón, A; López-Ortiz, F; Fernández, I; Fernández-Sánchez, J F; Fernández-Gutiérrez, A

    2013-10-21

    A new europium(III) membrane luminescent sensor based on a new tridentate bis(phosphinic acid)phosphine oxide (3) system has been developed. The synthesis of this new ligand is described and its full characterization by NMR, IR and elemental analyses is provided. The luminescent complex formed between europium(III) chloride and ligand 3 was evaluated in solution, observing that its spectroscopic and chemical characteristics are excellent for measuring in polymer inclusion membranes. Included in a Nafion membrane, all the parameters (ligand and ionic additives) that can affect the sensitivity and selectivity of the sensing membrane as well as the instrumental conditions were carefully optimized. The best luminescence signal (λexc = 229.06 nm and λem = 616.02 nm) was exhibited by the sensing film having a Nafion : ligand composition of 262.3 : 0.6 mg mL(-1). The membrane sensor showed a short response time (t95 = 5.0 ± 0.2 min) and an optimum working pH of 5.0 (25 mM acetate buffer solution). The membrane sensor manifested a good selectivity toward europium(III) ions with respect to other trivalent metals (iron, chromium and aluminium) and lanthanide(III) ions (lanthanum, samarium, terbium and ytterbium), although a small positive interference of terbium(III) ions was observed. It provided a linear range from 1.9 × 10(-8) to 5.0 × 10(-6) M with a very low detection limit (5.8 × 10(-9) M) and sensitivity (8.57 × 10(-7) a.u. per M). The applicability of this sensing film has been demonstrated by analyzing different kinds of spiked water samples obtaining recovery percentages of 95-97%.

  7. Frictional Performance Assessment of Cemented Carbide Surfaces Textured by Laser

    Science.gov (United States)

    Fang, S.; Llanes, L.; Klein, S.; Gachot, C.; Rosenkranz, A.; Bähre, D.; Mücklich, F.

    2017-10-01

    Cemented carbides are advanced engineering materials often used in industry for manufacturing cutting tools or supporting parts in tribological system. In order to improve service life, special attention has been paid to change surface conditions by means of different methods, since surface modification can be beneficial to reduce the friction between the contact surfaces as well as to avoid unintended damage. Laser surface texturing is one of the newly developed surface modification methods. It has been successfully introduced to fabricate some basic patterns on cemented carbide surfaces. In this work, Direct Laser Interference Patterning Technique (DLIP) is implemented to produce special line-like patterns on a cobalt (Co) and nickel (Ni) based cemented tungsten carbide grade. It is proven that the laser-produced patterns have high geometrical precision and quality stability. Furthermore, tribology testing using a nano-tribometer unit shows that friction is reduced by the line-like patterns, as compared to the polished one, under both lubricated and dry testing regimes, and the reduction is more pronounced in the latter case.

  8. Nanoscale fullerene compression of an yttrium carbide cluster.

    Science.gov (United States)

    Zhang, Jianyuan; Fuhrer, Tim; Fu, Wujun; Ge, Jiechao; Bearden, Daniel W; Dallas, Jerry; Duchamp, James; Walker, Kenneth; Champion, Hunter; Azurmendi, Hugo; Harich, Kim; Dorn, Harry C

    2012-05-23

    The nanoscale parameters of metal clusters and lattices have a crucial influence on the macroscopic properties of materials. Herein, we provide a detailed study on the size and shape of isolated yttrium carbide clusters in different fullerene cages. A family of diyttrium endohedral metallofullerenes with the general formula of Y(2)C(2n) (n = 40-59) are reported. The high field (13)C nuclear magnetic resonance (NMR) and density functional theory (DFT) methods are employed to examine this yttrium carbide cluster in certain family members, Y(2)C(2)@D(5)(450)-C(100), Y(2)C(2)@D(3)(85)-C(92), Y(2)C(2)@C(84), Y(2)C(2)@C(3v)(8)-C(82), and Y(2)C(2)@C(s)(6)-C(82). The results of this study suggest that decreasing the size of a fullerene cage with the same (Y(2)C(2))(4+) cluster results in nanoscale fullerene compression (NFC) from a nearly linear stretched geometry to a constrained "butterfly" structure. The (13)C NMR chemical shift and scalar (1)J(YC) coupling parameters provide a very sensitive measure of this NFC effect for the (Y(2)C(2))(4+) cluster. The crystal structural parameters of a previously reported metal carbide, Y(2)C(3) are directly compared to the (Y(2)C(2))(4+) cluster in the current metallofullerene study.

  9. Carbide-Derived Carbon Films for Integrated Electrochemical Energy Storage

    Science.gov (United States)

    Heon, Min

    Active RFID tags, which can communicate over tens or even hundreds of meters, MEMS devices of several microns in size, which are designed for the medical and pharmaceutical purposes, and sensors working in wireless monitoring systems, require microscale power sources that are able to provide enough energy and to satisfy the peak power demands in those applications. Supercapacitors have not been an attractive candidate for micro-scale energy storage, since most nanoporous carbon electrode materials are not compatible with micro-fabrication techniques and have failed to meet the requirements of high volumetric energy density and small form factor for power supplies for integrated circuits or microelectronic devices or sensors. However, supercapacitors can provide high power density, because of fast charging/discharging, which can enable self-sustaining micro-modules when combined with energy-harvesting devices, such as solar cell, piezoelectric or thermoelectric micro-generators. In this study, carbide-derived carbon (CDC) films were synthesized via vacuum decomposition of carbide substrates and gas etching of sputtered carbide thin films. This approach allowed manufacturing of porous carbon films on SiC and silicon substrates. CDC films were studied for micro-supercapacitor electrodes, and showed good double layer capacitance. Since the gas etching technique is compatible with conventional micro-device fabrication processes, it can be implemented to manufacture integrated on-chip supercapacitors on silicon wafers.

  10. Palladium-defect complexes in diamond and silicon carbide

    Energy Technology Data Exchange (ETDEWEB)

    Abiona, A. A., E-mail: adurafimihan.abiona@gmail.com; Kemp, W.; Timmers, H. [University of New South Wales, Canberra, School of Physical, Environmental and Mathematical Sciences (Australia); Bharuth-Ram, K. [Durban University of Technology, Physics Department (South Africa)

    2015-04-15

    Time Differential Perturbed Angular Correlations (TDPAC) studies, supported by Density Functional Theory (DFT) modelling, have shown that palladium atoms in silicon and germanium pair with vacancies. Building on these results, here we present DFT predictions and some tentative TDPAC results on palladium-defect complexes and site locations of palladium impurities in diamond and silicon carbide. For both diamond and silicon carbide, the DFT calculations predict that a split-vacancy V-PdBI-V complex is favoured, with the palladium atom on a bond-centred interstitial site having a nearest-neighbour semi-vacancy on either side. Consistent with experimental results, this configuration is also assigned to palladium complexes in silicon and germanium. For silicon carbide, the DFT modelling predicts furthermore that a palladium atom in replacing a carbon atom moves to a bond-centred interstitial site and pairs with a silicon vacancy to form a complex that is more stable than that of a palladium atom which replaces a silicon atom and then moves to a bond-centred interstitial site pairings with a carbon vacancy. These two competing alternatives differ by 8.94 eV. The favourable pairing with a silicon vacancy is also supported independently by TRIM Monte Carlo calculations, which predict that more silicon vacancies than carbon vacancies are created during heavy ion. implantation.

  11. Synthesis of a Mo/Nb mixed carbide

    Energy Technology Data Exchange (ETDEWEB)

    Teixeira da Silva, V.L. [NUCAT/PEQ/COPPE/Universidade Federal do Rio de Janeiro, Caixa Postal 68502, Rio de Janeiro, RJ-21945-970 (Brazil)]|[Environmental Catalysis and Materials Laboratory, Department of Chemical Engineering, Virginia Polytechnic Institute State University, Blacksburg, Virginia 24061 (United States); Schmal, M. [NUCAT/PEQ/COPPE/Universidade Federal do Rio de Janeiro, Caixa Postal 68502, Rio de Janeiro, RJ-21945-970 (Brazil); Schwartz, V.; Oyama, S.T. [Environmental Catalysis and Materials Laboratory, Department of Chemical Engineering, Virginia Polytechnic Institute State University, Blacksburg, Virginia 24061 (United States)

    1998-07-01

    Molybdenum and niobium carbides ({beta}{endash}Mo{sub 2}C, NbC), as well as mixed carbides of molybdenum and niobium, were synthesized by the temperature-programmed carburization method (TPC) using a 20 vol.thinsp{percent} CH{sub 4}/H{sub 2} gas mixture. The starting materials were MoO{sub 3}, B-Nb{sub 2}O{sub 5}, and physical mixtures of B-Nb{sub 2}O{sub 5}/MoO{sub 3} with Nb/(Nb+Mo) atomic ratios varying from 0.2 to 0.8, respectively. Results from catalytic and temperature-programmed oxidation (TPO) measurements indicate that during the carburization of the Nb{sub 2}O{sub 5}/MoO{sub 3} physical mixture with Nb/(Nb+Mo)=0.8 there is, besides {beta}{endash}Mo{sub 2}C and NbC formation, the appearance of a carbidic phase not detectable by x-ray diffraction (XRD). This phase appears to be highly active and selective for the dibenzothiophene hydrodesulfurization (HDS) reaction. {copyright} {ital 1998 Materials Research Society.}

  12. A Responsive Europium(III) Chelate that Provides a Direct Readout of pH by MRI

    Science.gov (United States)

    Wu, Yunkou; Soesbe, Todd C.; Kiefer, Garry E.; Zhao, Piyu; Sherry, A. Dean

    2010-01-01

    A europium(III) DO3A-tris(amide) complex is reported for imaging pH by MRI using ratiometric CEST principles. Deprotonation of a single phenolic proton between pH 6 and 7.6 results in an ~5 ppm shift in the water exchange CEST peak that is easily detected by MRI. Collection of two CEST images at two slightly different activation frequencies provides a direct readout of solution pH without the need of a concentration marker. PMID:20853833

  13. Review on Sintering Process of WC-Co Cemented Carbide in Metal Injection Molding Technology

    Science.gov (United States)

    Prathabrao, M.; Amin, Sri Yulis M.; Ibrahim, M. H. I.

    2017-01-01

    The objective of this paper is to give an overview on sintering process of WC-Co cemented carbides in metal injection molding technology. Metal injection molding is an advanced and promising technology in producing cemented nanostructured carbides. Cemented tungsten carbide (WC-Co) hard metal is known for its high hardness and wear resistance in various applications. Moreover, areas include fine grained materials, alternative binders, and alternative sintering techniques has been discussed in this paper.

  14. Chitosan: a green carbon source for the synthesis of graphitic nanocarbon, tungsten carbide and graphitic nanocarbon/tungsten carbide composites

    Energy Technology Data Exchange (ETDEWEB)

    Wang Baoli; Tian Chuigui; Wang Lei; Wang Ruihong; Fu Honggang, E-mail: fuhg@vip.sina.com [Key Laboratory of Functional Inorganic Material Chemistry, Ministry of Education, Heilongjiang University, Harbin 150080 (China)

    2010-01-15

    In this paper, a simple approach was proposed to fabricate graphitic carbon nanocapsules, tungsten carbide and tungsten carbides/graphitic carbon composites by using chitosan, a green and renewable biopolymer, as a carbon source. The route includes, first, fabrication of the precursors that consist of chitosan coordinated with a certain metal ion (or metal complex anion) followed by carbonizing the precursors under N{sub 2} atmosphere. The composition of the final products could be regulated by changing the type and ratio of the metal source (cations or complex anions) combined with the chitosan in the precursors. The experimental results showed that uniform carbon nanocapsules could be obtained when Ni{sup 2+} was introducing in the precursors, while incorporating [PW{sub 12}O{sub 40}]{sup 3-} (PW{sub 12}) with chitosan led to the formation of WC nanoparticles. As the Ni{sup 2+} and PW{sub 12} are simultaneously coordinated with chitosan, the composites of tungsten carbide/graphitic carbon were successfully produced. Transmission electron microscopy (TEM) analysis revealed that the graphitic carbon nanocapsules are about 45 nm in diameter; uniform WC nanoparticles with a average size of 40 nm are observed. Moreover, the particle size of WC in the tungsten carbide/graphitic carbon composite is about 10 nm, which is smaller than that of the pure WC particles. Furthermore, the performance of the sample-loaded Pt nanoparticles for methanol electro-oxidation was studied in detail. The results indicated that the samples could act as good carriers for Pt in the methanol electro-oxidation reaction with high effectivity and improved stability.

  15. Active carbon supported molybdenum carbides for higher alcohols synthesis from syngas

    DEFF Research Database (Denmark)

    Wu, Qiongxiao; Chiarello, Gian Luca; Christensen, Jakob Munkholt

    This work provides an investigation of the high pressure CO hydrogenation to higher alcohols on K2CO3 promoted active carbon supported molybdenum carbide. Both activity and selectivity to alcohols over supported molybdenum carbides increased significantly compared to bulk carbides in literatures....... The optimal loadings of both molybdenum carbide and the K2CO3 promoter on active carbon have been investigated. The catalysts were characterized using BET surface area measurements, transmission electron microscopy and X-ray diffraction. Additionally, in-situ X-ray diffraction and in-situ X-ray absorption...

  16. Photoluminescence and Raman spectroscopy characterization of boron- and nitrogen-doped 6H silicon carbide

    DEFF Research Database (Denmark)

    Ou, Yiyu; Jokubavicius, Valdas; Liu, Chuan

    2011-01-01

    Boron - and nitrogen-doped 6H silicon carbide epilayers grown on low off-axis 6H silicon carbide substrates have been characterized by photoluminescence and Raman spectroscopy. Combined with secondary ion mass spectrometry results, preferable doping type and optimized concentration could be propo......Boron - and nitrogen-doped 6H silicon carbide epilayers grown on low off-axis 6H silicon carbide substrates have been characterized by photoluminescence and Raman spectroscopy. Combined with secondary ion mass spectrometry results, preferable doping type and optimized concentration could...

  17. Thermal Analysis of Tantalum Carbide-Hafnium Carbide Solid Solutions from Room Temperature to 1400 °C

    Directory of Open Access Journals (Sweden)

    Cheng Zhang

    2017-07-01

    Full Text Available The thermogravimetric analysis on TaC, HfC, and their solid solutions has been carried out in air up to 1400 °C. Three solid solution compositions have been chosen: 80TaC-20 vol % HfC (T80H20, 50TaC-50 vol % HfC (T50H50, and 20TaC-80 vol % HfC (T20H80, in addition to pure TaC and HfC. Solid solutions exhibit better oxidation resistance than the pure carbides. The onset of oxidation is delayed in solid solutions from 750 °C for pure TaC, to 940 °C for the T50H50 sample. Moreover, T50H50 samples display the highest resistance to oxidation with the retention of the initial carbides. The oxide scale formed on the T50H50 sample displays mechanical integrity to prevent the oxidation of the underlying carbide solid solution. The improved oxidation resistance of the solid solution is attributed to the reaction between Ta2O5 and HfC, which stabilizes the volume changes induced by the formation of Ta2O5 and diminishes the generation of gaseous products. Also, the formation of solid solutions disturbs the atomic arrangement inside the lattice, which delays the reaction between Ta and O. Both of these mechanisms lead to the improved oxidation resistances of TaC-HfC solid solutions.

  18. Spectroscopic properties and luminescence behaviour of europium doped lithium borate glasses

    Energy Technology Data Exchange (ETDEWEB)

    Anjaiah, J., E-mail: anjaiah.juluru@gmail.com [Department of Physics, The University of Dodoma, Tanzania, East Africa (Tanzania, United Republic of); Department of Physics, Geethanjali College of Engineering and Technology, Keesara, RR Dist., Hyderabad 501 301 (India); Laxmikanth, C. [Department of Physics, The University of Dodoma, Tanzania, East Africa (Tanzania, United Republic of); Veeraiah, N. [Department of Physics, Acharya Nagarjuna University, Nagarjuna Nagar, Guntur 522 510, AP. (India)

    2014-12-01

    Li{sub 2}O–MO–B{sub 2}O{sub 3} (MO=ZnO, CaO and CdO) glasses doped with europium are prepared by using the melt quenching technique to study their absorption and luminescence properties to understand their lasing potentialities. The XRD pattern of the glasses confirmed the amorphous nature and the IR spectra reveal the presence of BO{sub 3} and BO{sub 4} units in the glass network. Judd–Ofelt intensity parameters Ω{sub λ} (λ=2, 4, 6) are evaluated from the intensities of various absorption bands of optical absorption spectra. The J–O parameters have been used to calculate transition probabilities (A), lifetime (τ{sub R}), branching ratios (β{sub R}) and stimulated emission cross-section (σ{sub P}) for the {sup 5}D{sub 0}→{sup 7}F{sub J} (J=1–4) transitions of the Eu{sup 3+} ions. The decay from the {sup 5}D{sub 0} level of Eu{sup 3+} ions in these glasses has been measured and analysed. Branching ratios and stimulated emission cross-sections measured for all these glasses show that the {sup 5}D{sub 0}→{sup 7}F{sub 1} transition under investigation has the potential for laser applications. The high stimulated emission cross-section and branching ratios from the present glasses suggests their potential for infra red lasers. The study of the thermoluminescence is also carried out and the data suggests that the CdBEu glass is suitable for thermoluminescence emission output among the three Eu{sup 3+} doped glasses.

  19. Size-dependent cytotoxicity of europium doped NaYF{sub 4} nanoparticles in endothelial cells

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Shizhu; Zhang, Cuimiao; Jia, Guang; Duan, Jianlei; Wang, Shuxiang, E-mail: wsx@hbu.edu.cn; Zhang, Jinchao, E-mail: jczhang6970@163.com

    2014-10-01

    Lanthanide-doped sodium yttrium fluoride (NaYF{sub 4}) nanoparticles exhibit novel optical properties which make them be widely used in various fields. The extensive applications increase the chance of human exposure to these nanoparticles and thus raise deep concerns regarding their riskiness. In the present study, we have synthesized europium doped NaYF{sub 4} (NaYF{sub 4}:Eu{sup 3+}) nanoparticles with three diameters and used endothelial cells (ECs) as a cell model to explore the potential toxic effect. The cell viability, cytomembrane integrity, cellular uptake, intracellular localization, intracellular reactive oxygen species (ROS), mitochondrial membrane potential (MMP), apoptosis detection, caspase-3 activity and expression of inflammatory gene were studied. The results indicated that these nanoparticles could be uptaken into ECs and decrease the cell viability, induce the intracellular lactate dehydrogenase (LDH) release, increase the ROS level, and decrease the cell MMP in a size-dependent manner. Besides that, the cells were suffered to apoptosis with the caspase-3 activation, and the inflammation specific gene expressions (ICAM1 and VCAM1) were also increased. Our results suggest that the damage pathway may be related to the ROS generation and mitochondrial damage. The results provide novel evidence to elucidate their toxicity mechanisms and may be helpful for more rational applications of these compounds in the future. - Highlights: • NaYF{sub 4}:Eu{sup 3+} nanoparticles with three diameters have been synthesized. • NaYF{sub 4}:Eu{sup 3+} nanoparticles could be uptaken by endothelial cells (ECs). • NaYF{sub 4}:Eu{sup 3+} nanoparticles show a significant cytotoxicity on ECs. • The size of NaYF{sub 4}:Eu{sup 3+} nanoparticles may be important to their toxicology effect.

  20. Two-dimensional high spatial-resolution dosimeter using europium doped potassium chloride: a feasibility study

    Science.gov (United States)

    Li, H. Harold; Driewer, Joseph P.; Han, Zhaohui; Low, Daniel A.; Yang, Deshan; Xiao, Zhiyan

    2014-01-01

    Recent research has shown that KCl:Eu2+ has great potential for use in megavoltage radiation therapy dosimetry because this material exhibits excellent storage performance and is reusable due to strong radiation hardness. This work reports the authors’ attempts to fabricate 2D KCl:Eu2+ storage phosphor films (SPFs) using both a physical vapor deposition (PVD) method and a tape casting method. X ray diffraction analysis showed that a 10 µm thick PVD sample was composed of highly crystalline KCl. No additional phases were observed, suggesting that the europium activator had completed been incorporated into the KCl matrix. Photostimulated luminescence and photoluminescence spectra suggested that F (Cl-) centers were the electron storage centers post×ray irradiation and that Eu2+ cations acted as luminescence centers in the photostimulation process. The 150-µm thick casted KCl:Eu2+ SPF showed sub-millimeter spatial resolution. Monte Carlo simulations further demonstrated that the admixture of 20% KCl:Eu2+ and 80% low Z polymer binder exhibited almost no energy dependence in a 6 MV beam. KCl:Eu2+ pellet samples showed a large dynamic range from 0.01 cGy to 60 Gy dose-to-water, and saturated at approximately 500 Gy as a result of KCl’s intrinsic high radiation hardness. Taken together, this work provides strong evidence that KCl:Eu2+ based SPF with associated readout apparatus could result in a novel electronic film system that has all the desirable features associated with classic radiographic film and, importantly, water equivalence and the capability of permanent identification of each detector. PMID:24651448

  1. A Novel Europium Chelate Coated Nanosphere for Time-Resolved Fluorescence Immunoassay

    Science.gov (United States)

    Shen, Yifeng; Xu, Shaohan; He, Donghua

    2015-01-01

    A novel europium ligand 2, 2’, 2’’, 2’’’-(4, 7-diphenyl-1, 10-phenanthroline-2, 9-diyl) bis (methylene) bis (azanetriyl) tetra acetic acid (BC-EDTA) was synthesized and characterized. It shows an emission spectrum peak at 610 nm when it is excited at 360 nm, with a large Stock shift (250 nm). It is covalently coated on the surface of a bare silica nanosphere containi free amino groups, using 1-ethyl-3-(3-dimethylaminopropyl) carbodiimide hydrochloride and N-Hydroxysuccinimide. We also observed an interesting phenomenon that when BC-EDTA is labeled with a silica nanosphere, the chelate shows different excitation spectrum peaks of about 295 nm. We speculate that the carboxyl has a significant influence on its excitation spectrum. The BC-EDTA/Eu3+coated nanosphere could be used as a fluorescent probe for time-resolved fluorescence immunoassay. We labeled the antibody with the fluorescent nanosphere to develop a nanosphere based hepatitis B surface antigen as a time-resolved fluorescence immunoassay reagent, which is very easy to operate and eliminates potential contamination of Eu3+ contained in the environment. The analytical and functional sensitivities are 0.0037 μg/L and 0.08 μg/L (S/N≥2.0) respectively. The detection range is 0.08-166.67 μg/L, which is much wider than that of ELISA (0.2-5μg/L). It is comparable to the commercial dissociation-enhanced lanthanide fluoro-immunoassay system (DELFIA) reagents (0.2-145μg/L). We propose that it can fulfill clinical applications. PMID:26056826

  2. A Novel Europium Chelate Coated Nanosphere for Time-Resolved Fluorescence Immunoassay.

    Directory of Open Access Journals (Sweden)

    Yifeng Shen

    Full Text Available A novel europium ligand 2,2',2'',2'''-(4,7-diphenyl-1,10-phenanthroline-2,9-diyl bis (methylene bis (azanetriyl tetra acetic acid (BC-EDTA was synthesized and characterized. It shows an emission spectrum peak at 610 nm when it is excited at 360 nm, with a large Stock shift (250 nm. It is covalently coated on the surface of a bare silica nanosphere containi free amino groups, using 1-ethyl-3-(3-dimethylaminopropyl carbodiimide hydrochloride and N-Hydroxysuccinimide. We also observed an interesting phenomenon that when BC-EDTA is labeled with a silica nanosphere, the chelate shows different excitation spectrum peaks of about 295 nm. We speculate that the carboxyl has a significant influence on its excitation spectrum. The BC-EDTA/Eu3+coated nanosphere could be used as a fluorescent probe for time-resolved fluorescence immunoassay. We labeled the antibody with the fluorescent nanosphere to develop a nanosphere based hepatitis B surface antigen as a time-resolved fluorescence immunoassay reagent, which is very easy to operate and eliminates potential contamination of Eu3+ contained in the environment. The analytical and functional sensitivities are 0.0037 μg/L and 0.08 μg/L (S/N≥2.0 respectively. The detection range is 0.08-166.67 μg/L, which is much wider than that of ELISA (0.2-5 μg/L. It is comparable to the commercial dissociation-enhanced lanthanide fluoro-immunoassay system (DELFIA reagents (0.2-145 μg/L. We propose that it can fulfill clinical applications.

  3. TOF SIMS analysis and generation of white photoluminescence from strontium silicate codoped with europium and terbium

    Energy Technology Data Exchange (ETDEWEB)

    Tshabalala, Modiehi A.; Swart, Hendrik C.; Ntwaeaborwa, Odireleng M., E-mail: ntwaeab@ufs.ac.za [Department of Physics, University of the Free State, P.O Box 339, Bloemfontein 9300 South Africa (South Africa)

    2014-03-15

    White light emitting terbium (Tb{sup 3+}) and europium (Eu{sup 3+}) codoped strontium silicate (Sr{sub 2}SiO{sub 4}) phosphors were prepared by a solid state reaction process. The structure, particle morphology, chemical composition, ion distribution, photoluminescence (PL), and decay characteristics of the phosphors were analyzed by x-ray diffraction (XRD), scanning electron microscopy (SEM), time-of-flight secondary ion mass spectrometry (TOF-SIMS), and PL spectroscopy, respectively. The XRD data showed that our Sr{sub 2}SiO{sub 4} composed of two phases, namely, β-Sr{sub 2}SiO{sub 4} and α′-Sr{sub 2}SiO{sub 4}, and the α′-Sr{sub 2}SiO{sub 4} phase was more prominent than the β-Sr{sub 2}SiO{sub 4} phase. The SEM micrographs showed that the particles were agglomerated together and they did not have definite shapes. All ions (i.e., negative and positive) present in our materials were identified by TOF-SIMS. In addition, the chemical imaging performed with the TOF-SIMS demonstrated how the individual ions including the dopants (Eu{sup 3+} and Tb{sup 3+}) were distributed in the host lattice. White photoluminescence was observed when the Sr{sub 2}SiO{sub 4}:Tb{sup 3+}, Eu{sup 3+} phosphor was excited at 239 nm using a monochromatized xenon lamp as the excitation source. The phosphor exhibited fast decay lifetimes implying that it is not a good candidate for long afterglow applications.

  4. Thermoluminescence of europium-doped zinc oxide exposed to beta particle irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Iriqui R, J. L.; Cruz V, C. [Universidad de Sonora, Departamento de Investigacion en Polimeros y Materiales, Apdo. Postal 130, 83000 Hermosillo, Sonora (Mexico); Bernal, R. [Universidad de Sonora, Departamento de Investigacion en Fisica, Apdo. Postal 5-088, 83000 Hermosillo, Sonora (Mexico); Castano, V. M., E-mail: jorgeiriqui@gimmunison.com [UNAM, Instituto de Fisica, Centro de Fisica Aplicada y Tecnologia Avanzada, Apdo. Postal 1-1010, 76000 Queretaro, Qro. (Mexico)

    2015-10-15

    Full text: Zn O is a promising material for a range of optoelectronics applications, due to its direct wide band gap (E{sub g} ∼3.3 eV at 300 K) and large exciton binding energy (60 MeV). Its applications include UV light emitters, varistors, surface acoustic wave devices, piezoelectric transducers, and chemical and gas sensing. Rare-earth activation of phosphors has long been seen as an effective process since coupling energy into the rare-earth-ion site, either by ionization, charge exchange or a resonance energy process, results in light production. It is reported that Europium modifies the response thermoluminescence (Tl) for pure zinc oxide, when is irradiated with X-ray, created a peak at 365 degrees C. In this work, Zn O:Eu phosphors were synthesized by a chemical method. Some samples were exposed to beta particle irradiation for doses ranging from 1 up to 100 Gy. Tl response as a function of dose is linear throughout the studied dose range. The glow curve exhibits three maxima, centered at 176, 279 and 340 degrees C. The reusability studies obtained after ten repeated cycles of annealing irradiation readout for the Zn O:Eu shows that the variation in the Tl response is ten percent and tends to stabilization. The results indicate that these new Zn O:Eu phosphors are promising detectors and dosimeters for beta radiation. The structural and morphological characterization was carried out by X-ray diffraction and scanning electron microscopy, respectively. (Author)

  5. Study on fragmentation and dissolution behavior of carbide in a hot-rolled hypereutectic high chromium cast iron

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Fei; Jiang, Yehua, E-mail: jiangyehua@kmust.edu.cn; Xiao, Han; Tan, Jun

    2015-01-05

    Highlights: • The method to prepare Carbon steel/High chromium iron is totally new. • High chromium iron can achieve small plastic deformation during hot rolling process. • Carbides in high chromium irons are crushed, refined obviously and becoming isolated, which is benefit to improve the impact toughness. • The carbide fragmentation and dissolution behavior of the hot-rolled HCCI were analyzed. - Abstract: A sandwich-structured composite containing a hypereutectic high chromium cast iron (HCCI) and low carbon steel (LCS) claddings was newly fabricated by centrifugal casting, then the blank was hot-rolled into composite plate. The carbide fragmentation and dissolution behavior of the hot-rolled HCCI were analyzed. During hot rolling, significant refinement of carbides was discovered in hot-rolled HCCI specimens. The carbides were broken and partly dissolved into the austenite matrix. The results show that carbides are firstly dissolved under the action of stress. There are grooves appeared at the boundaries of the carbides. The grooves reduce the cross section of the carbide. When the cross section of the carbide reaches to the required minimum critical cross section, the carbide breaks through the tensile force. After break, carbides continue to dissolve since more interfaces between the matrix and carbides are generated. The secondary carbides precipitated due to the dissolution are index as fcc and stacking faults parallel to the {1 1 1} are observed.

  6. Exposure to fibres, crystalline silica, silicon carbide and sulphur dioxide in the norwegian silicon carbide industry.

    Science.gov (United States)

    Føreland, S; Bye, E; Bakke, B; Eduard, W

    2008-07-01

    The aim of this study was to assess personal exposure to fibres, crystalline silica, silicon carbide (SiC) and sulphur dioxide in the Norwegian SiC industry. Approximately 720 fibre samples, 720 respirable dust samples and 1400 total dust samples were collected from randomly chosen workers from the furnace, processing and maintenance departments in all three Norwegian SiC plants. The respirable dust samples were analysed for quartz, cristobalite and non-fibrous SiC content. Approximately 240 sulphur dioxide samples were collected from workers in the furnace department. The sorting operators from all plants, control room and cleaning operators in Plant A and charger, charger/mix and payloader operators in Plant C had a geometric mean (GM) of fibre exposure above the Norwegian occupational exposure limit (OEL) (0.1 fibre cm(-3)). The cleaner operators in Plant A had the highest GM exposure to respirable quartz (20 mug m(-3)). The charger/mix operators in Plant C had the highest GM exposure to respirable cristobalite (38 mug m(-3)) and the refinery crusher operators in Plant A had the highest GM exposure to non-fibrous SiC (0.65 mg m(-3)). Exposure to the crystalline silica and non-fibrous SiC was generally low and between 0.4 and 2.1% of the measurements exceeded the OELs. The cleaner operators in Plant A had the highest GM exposure to respirable dust (1.3 mg m(-3)) and total dust (21 mg m(-3)). GM exposures for respirable dust above the Norwegian SiC industry-specific OEL of 0.5 mg m(-3) were also found for refinery crusher operators in all plants and mix, charger, charger/mix and sorting operators in Plant C. Only 4% of the total dust measurements exceeded the OEL for nuisance dust of (10 mg m(-3)). Exposure to sulphur dioxide was generally low. However, peaks in the range of 10-100 p.p.m. were observed for control room and crane operators in Plants A and B and for charger and charger/mix operators in Plant C. Workers in the SiC industry are exposed to a mixture of

  7. Synthesis and characterization of barium titanate, doped with europium and neodymium; Sintese e caracterizacao de titanato de bario, dopados com europio e neodimio

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Fernanda L.C.; Cabral, Alciney M.; Silva, Ademir O.; Oliveiro, Joao B.L., E-mail: nanda_louise@yahoo.com.br [Universidade Federal do Rio Grande do Norte (UFRN), Natal (Brazil). Instituto de Quimica

    2013-07-01

    This work aims at synthesize and characterize mixed oxides in Barium Titanium matrix in doping with Neodymium and Europium analyzing thermogravimetric curves, characteristic bands at infrared region of the polymer complex, which are intermediates to mixed oxides, and identify the formation thereof, and the crystallinity using XRD analysis.

  8. Stability constants of the Europium complexes with the chloride ions; Constantes de estabilidad de los complejos del europio con los iones cloruro

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez R, M.; Solache R, M.; Rojas H, A. [Instituto Nacional de Investigaciones Nucleares, Departamento de Quimica, A.P. 18-1027, C.P. 11801 Mexico D.F. (Mexico)

    2000-07-01

    The stability constants of lanthanides complexes with chloride ions which were determined at the same ionic force but in different media, are significantly different. It does not exist a systematic study over these stability constants. The purpose of this work is to determine the stability constants of the europium complexes with chloride ions at 303 K, by the solvents extraction method. (Author)

  9. LA-ICP-MS Allows Quantitative Microscopy of Europium-Doped Iron Oxide Nanoparticles and is a Possible Alternative to Ambiguous Prussian Blue Iron Staining.

    Science.gov (United States)

    Scharlach, Constantin; Müller, Larissa; Wagner, Susanne; Kobayashi, Yuske; Kratz, Harald; Ebert, Monika; Jakubowski, Norbert; Schellenberger, Eyk

    2016-05-01

    The development of iron oxide nanoparticles for biomedical applications requires accurate histological evaluation. Prussian blue iron staining is widely used but may be unspecific when tissues contain substantial endogenous iron. Here we tested whether microscopy by laser ablation coupled to inductively coupled plasma mass spectrometry (LA-ICP-MS) is sensitive enough to analyze accumulation of very small iron oxide particles (VSOP) doped with europium in tissue sections. For synthesis of VSOP, a fraction of Fe3+ (5 wt%) was replaced by Eu3+, resulting in particles with 0.66 mol% europium relative to iron (Eu-VSOP) but with otherwise similar properties as VSOP. Eu-VSOP or VSOP was intravenously injected into ApoE-/- mice on Western cholesterol diet and accumulated in atherosclerotic plaques of these animals. Prussian blue staining was positive for ApoE-/- mice with particle injection but also for controls. LA-ICP-MS microscopy resulted in sensitive and specific detection of the europium of Eu-VSOP in liver and atherosclerotic plaques. Furthermore, calibration with Eu-VSOP allowed calculation of iron and particle concentrations in tissue sections. The combination of europium-doped iron oxide particles and LA-ICP-MS microscopy provides a new tool for specific and quantitative analysis of particle distribution at the tissue level and allows correlation with other elements such as endogenous iron.

  10. Novel Time-Resolved Fluorescence Europium Nanoparticle Immunoassay for Detection of Human Immunodeficiency Virus-1 Group O Viruses Using Microplate and Microchip Platforms.

    Science.gov (United States)

    Haleyur Giri Setty, Mohan Kumar; Liu, Jikun; Mahtani, Prerna; Zhang, Panhe; Du, Bingchen; Ragupathy, Viswanath; Devadas, Krishnakumar; Hewlett, Indira K

    2016-06-01

    Accurate detection and quantification of HIV-1 group O viruses have been challenging for currently available HIV assays. We have developed a novel time-resolved fluorescence (TRF) europium nanoparticle immunoassay for HIV-1 group O detection using a conventional microplate enzyme-linked immunosorbent assay (ELISA) and a microchip platform. We screened several antibodies for optimal reactivity with several HIV-1 group O strains and identified antibodies that can detect all the strains of HIV-1 group O that were available for testing. The antibodies were used to develop a conventional ELISA format assay and an in-house developed europium nanoparticle-based assay for sensitivity. The method was evaluated on both microwell plate and microchip platforms. We identified two specific and sensitive antibodies among the six we screened. The antibodies, C65691 and ANT-152, were able to quantify 15 and detect all 17 group O viruses, respectively, as they were broadly cross-reactive with all HIV-1 group O strains and yielded better signals compared with other antibodies. We have developed a sensitive assay that reflects the actual viral load in group O samples by using an appropriate combination of p24 antibodies that enhance group O detection and a highly sensitive TRF-based europium nanoparticle for detection. The combination of ANT-152 and C65690M in the ratio 3:1 was able to give significantly higher signals in our europium-based assay compared with using any single antibody.

  11. Lanthanide-to-lanthanide energy-transfer processes operating in discrete polynuclear complexes: can trivalent europium be used as a local structural probe?

    Science.gov (United States)

    Zaïm, Amir; Eliseeva, Svetlana V; Guénée, Laure; Nozary, Homayoun; Petoud, Stéphane; Piguet, Claude

    2014-09-15

    This work, based on the synthesis and analysis of chemical compounds, describes a kinetic approach for identifying intramolecular intermetallic energy-transfer processes operating in discrete polynuclear lanthanide complexes, with a special emphasis on europium-containing entities. When all coordination sites are identical in a (supra)molecular complex, only heterometallic communications are experimentally accessible and a Tb → Eu energy transfer could be evidenced in [TbEu(L5)(hfac)6] (hfac = hexafluoroacetylacetonate), in which the intermetallic separation amounts to 12.6 Å. In the presence of different coordination sites, as found in the trinuclear complex [Eu3(L2)(hfac)9], homometallic communication can be induced by selective laser excitation and monitored with the help of high-resolution emission spectroscopy. The narrow and non-degenerated character of the Eu((5)D0 ↔ (7)F0) transition excludes significant spectral overlap between donor and acceptor europium cations. Intramolecular energy-transfer processes in discrete polynuclear europium complexes are therefore limited to short distances, in agreement with the Fermi golden rule and with the kinetic data collected for [Eu3(L2)(hfac)9] in the solid state and in solution. Consequently, trivalent europium can be considered as a valuable local structural probe in discrete polynuclear complexes displaying intermetallic separation in the sub-nanometric domain, a useful property for probing lanthanido-polymers. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Optical isomers of N,N′-bis(1-phenylethyl)-2,6-pyridinedicarboxamide coordinated to europium(III) ions as reliable circularly polarized luminescence calibration standards†

    Science.gov (United States)

    Bonsall, Steven D.; Houcheime, Mona; Straus, Daniel A.; Muller, Gilles

    2009-01-01

    The synthesis of two optical isomers of N,N′-bis(1-phenylethyl)-2,6-pyridinedicarboxamide and the constant circularly polarized luminescence (CPL) activity of their acetonitrile trivalent europium complex solutions over a long period of time open new perspectives for performing accurate routine CPL calibration tests at low cost. PMID:17728891

  13. Photoluminescence behavior of europium (III) complexes containing 1-(4-tert-butylphenyl)-3-(2-naphthyl)-propane-1,3-dione ligand.

    Science.gov (United States)

    Wang, Dunjia; Zheng, Chunyang; Fan, Ling; Hu, Yanjun; Zheng, Jing

    2014-01-03

    Three novel europium complexes with 1-(4-tert-butylphenyl)-3-(2-naphthyl)-propane-1,3-dione (TNPD) and 2,2-dipyridine (Bipy) or 1,10-phenan-throline (Phen) were synthesized and confirmed by FT-IR, (1)H NMR, UV-vis absorption and elemental analysis. Photoluminescence behavior of complexes Eu(TNPD)3, Eu(TNPD)3·Bipy and Eu(TNPD)3·Phen were investigated in detail. Their emission spectra exhibited the characteristic emission bands that arise from the (5)D0→(7)FJ (J=0-4) transitions of the europium ion in solid state. Meanwhile, the results of their lifetime decay curves indicated that only one chemical environment existed around the europium ion. The intrinsic luminescence quantum efficiency (η) and the experimental intensity parameters (Ωt) of europium complexes were determined according to the emission spectra and luminescence decay curves in solid state. The complex Eu(TNPD)3·Phen showed much longer lifetime (τ) and higher luminescence quantum efficiency (η) than complexes Eu(TNPD)3 and Eu(TNPD)3·Bipy. Copyright © 2013 Elsevier B.V. All rights reserved.

  14. Synthesis, crystal structure and photophysical properties of europium(III) and terbium(III) complexes with pyridine-2,6-dicarboxamide

    NARCIS (Netherlands)

    Tanase, S.; Gallego, P.M.; Gelder, R. de; Fu, W.T.

    2007-01-01

    The reactions of pyridine-2,6-dicarboxamide with europium(III) and terbium(III) triflates led to the formation of mononuclear complexes of formula [Ln(pcam)(3)](CF3SO3)(3) (Ln = Eu 1, Tb 2; pcam stands for pyridine-2,6-dicarboxamide). From single-crystal X-ray diffraction analysis, the complexes

  15. Structural investigation and photoluminescent properties of gadolinium(III), europium(III) and terbium(III) 3-mercaptopropionate complexes.

    Science.gov (United States)

    Souza, E R; Mazali, I O; Sigoli, F A

    2014-01-01

    This work reports on the synthesis, crystallographic determination and spectroscopic characterization of gadolinium(III), terbium(III) and europium(III) 3-mercaptopropionate complexes, aqua-tris(3-mercaptopropionate)lanthanide(III)--[Ln(mpa)3(H2O)]. The Judd-Ofelt intensity parameters were experimentally determined from emission spectrum of the [Eu(mpa)3(H2O)]complex and they were also calculated from crystallographic data. The complexes are coordination polymers, where the units of each complex are linked together by carboxylate groups leading to an unidimensional and parallel chains that by chemical interactions form a tridimensional framework. The emission spectrum profile of the [Eu(mpa)3(H2O)] complex is discussed based on point symmetry of the europium(III) ion, that explains the bands splitting observed in its emission spectrum. Photoluminescent analysis of the [Gd(mpa)3(H2O)] complex show no efficient ligand excitation but an intense charge transfer band. The excitation spectra of the [Eu(mpa)3(H2O)] and [Tb(mpa)3(H2O)] complexes do not show evidence of energy transfer from the ligand to the excited levels of these trivalent ions. Therefore the emission bands are originated only by direct f-f intraconfigurational excitation of the lantanide(III) ions.

  16. Simple preparation of fluorescent composite films based on cerium and europium doped LaF3 nanoparticles

    Science.gov (United States)

    Secco, Henrique de L.; Ferreira, Fabio F.; Péres, Laura O.

    2018-03-01

    The combination of materials to form hybrids with unique properties, different from those of the isolated components, is a strategy used to prepare functional materials with improved properties aiming to allow their application in specific fields. The doping of lanthanum fluoride with other rare earth elements is used to obtain luminescent particles, which may be useful to the manufacturing of electronic devices' displays and biological markers, for instance. The application of the powder of nanoparticles has limitations in some fields; to overcome this, the powder may be incorporated in a suitable polymeric matrix. In this work, lanthanum fluoride nanoparticles, undoped and doped with cerium and europium, were synthesized through the co-precipitation method in aqueous solution. Aiming the formation of solid state films, composites of nanoparticles in an elastomeric matrix, the nitrile rubber (NBR), were prepared. The flexibility and the transparency of the matrix in the regions of interest are advantages for the application of the luminescent composites. The composites were applied as films using the casting and the spin coating techniques and luminescent materials were obtained in the samples doped with europium and cerium. Scanning electron microscopy images showed an adequate dispersion of the particles in the matrix in both film formation techniques. Aggregates of the particles were detected in the samples which may affect the uniformity of the emission of the composites.

  17. A microwave-assisted solution combustion synthesis to produce europium-doped calcium phosphate nanowhiskers for bioimaging applications.

    Science.gov (United States)

    Wagner, Darcy E; Eisenmann, Kathryn M; Nestor-Kalinoski, Andrea L; Bhaduri, Sarit B

    2013-09-01

    Biocompatible nanoparticles possessing fluorescent properties offer attractive possibilities for multifunctional bioimaging and/or drug and gene delivery applications. Many of the limitations with current imaging systems center on the properties of the optical probes in relation to equipment technical capabilities. Here we introduce a novel high aspect ratio and highly crystalline europium-doped calcium phosphate nanowhisker produced using a simple microwave-assisted solution combustion synthesis method for use as a multifunctional bioimaging probe. X-ray diffraction confirmed the material phase as europium-doped hydroxyapatite. Fluorescence emission and excitation spectra and their corresponding peaks were identified using spectrofluorimetry and validated with fluorescence, confocal and multiphoton microscopy. The nanowhiskers were found to exhibit red and far red wavelength fluorescence under ultraviolet excitation with an optimal peak emission of 696 nm achieved with a 350 nm excitation. Relatively narrow emission bands were observed, which may permit their use in multicolor imaging applications. Confocal and multiphoton microscopy confirmed that the nanoparticles provide sufficient intensity to be utilized in imaging applications. Copyright © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  18. Europium nanoparticle-based simple to perform dry-reagent immunoassay for the detection of hepatitis B surface antigen.

    Science.gov (United States)

    Talha, Sheikh M; Salminen, Teppo; Juntunen, Etvi; Spangar, Anni; Gurramkonda, Chandrasekhar; Vuorinen, Tytti; Khanna, Navin; Pettersson, Kim

    2016-03-01

    Hepatitis B infection, caused by hepatitis B virus (HBV), presents a huge global health burden. Serological diagnosis of HBV mainly relies on the detection of hepatitis B surface antigen (HBsAg). Although there are high sensitivity commercial HBsAg enzyme immunoassays (EIAs) available, many low-resource laboratories lacking trained technicians continue to use rapid point-of-care assays with low sensitivities for HBsAg detection, due to their simplicity to operate. We developed a time-resolved fluorometric dry-reagent HBsAg immunoassay which meets the detection limit of high sensitivity EIAs but is simple to operate. To develop the assay, anti-HBsAg monoclonal antibody coated on europium nanoparticles was dried atop of biotinylated anti-HBsAg polyclonal antibody immobilized on streptavidin-coated microtiter wells. To test a sample in dry-reagent assay, serum sample and assay buffer were added to the wells, incubated, washed and europium signals were measured. The assay showed a detection limit of 0.25 ng/ml using HBsAg spiked in serum sample. When evaluated with 24 HBV positive and 37 negative serum samples, assay showed 100% sensitivity and specificity. Assay wells are stable for at least 26 weeks when stored at 4°C, and can tolerate elevated temperatures of up to 35°C for two weeks. The developed assay has high potential to be used in low-resource laboratories. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Bright mono-aqua europium complexes based on triazacyclononane that bind anions reversibly and permeate cells efficiently.

    Science.gov (United States)

    Butler, Stephen J; McMahon, Brian K; Pal, Robert; Parker, David; Walton, James W

    2013-07-15

    A series of five europium(III) complexes has been prepared from heptadentate N5O2 ligands that possess a brightness of more than 10 mM(-1) cm(-1) in water, following excitation over the range λ=330-355 nm. Binding of several oxy anions has been assessed by emission spectral titrimetric analysis, with the binding of simple carboxylates, lactate and citrate involving a common ligation mode following displacement of the coordinated water. Selectivity for bicarbonate allows the rapid determination of this anion in human serum, with K(d)=37 mM (295 K). The complexes are internalised quickly into mammalian cells and exhibit a mitochondrial localisation at early time points, migrating after a few hours to reveal a predominant lysosomal distribution. Herein, we report the synthesis and complexation behaviour of strongly emissive europium (III) complexes that bind oxy-anions in aqueous media with an affinity and selectivity profile that is distinctively different from previously studied systems. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Highly luminescent charge-neutral europium(iii) and terbium(iii) complexes with tridentate nitrogen ligands.

    Science.gov (United States)

    Senthil Kumar, Kuppusamy; Schäfer, Bernhard; Lebedkin, Sergei; Karmazin, Lydia; Kappes, Manfred M; Ruben, Mario

    2015-09-21

    We report on the synthesis of tridentate-nitrogen pyrazole-pyridine-tetrazole (L(1)H) and pyrazole-pyridine-triazole (L(2)H) ligands and their complexation with lanthanides (Ln = Gd(iii), Eu(iii) and Tb(iii)) resulting in stable, charge-neutral complexes Ln(L(1))3 and Ln(L(2))3, respectively. X-ray crystallographic analysis of the complexes with L(1) ligands revealed tricapped trigonal coordination geometry around the lanthanide ions. All complexes show bright photoluminescence (PL) in the solid state, indicating efficient sensitization of the lanthanide emission via the triplet states of the ligands. In particular, the terbium complexes show high PL quantum yields of 65 and 59% for L(1) and L(2), respectively. Lower PL efficiencies of the europium complexes (7.5 and 9%, respectively) are attributed to large energy gaps between the triplet states of the ligands and accepting levels of Eu(iii). The triplet state energy can be reduced by introducing an electron withdrawing (EW) group at the 4 position of the pyridine ring. Such substitution of L(1)H with a carboxylic ester (COOMe) EW group leads to a europium complex with increased PL quantum yield of 31%. A comparatively efficient PL of the complexes dissolved in ethanol indicates that the lanthanide ions are shielded against nonradiative deactivation via solvent molecules.

  1. Highly Sensitive Luminescence Assessment of Bile Acid Using a Balofloxacin-Europium(III) Probe in Micellar Medium

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Huan; Zhao, Fang; Si, Hailin; Zhang, Shuaishuai; Wang, Chunchun; Qi, Peirong [Shihezi Univ., Shihezi (China)

    2012-12-15

    A novel and simple method of luminescence enhancement effect for the determination of trace amounts of bile acid was proposed. The procedure was based on the luminescence intensity of the balofloxacin-europium(III) complex that could be strongly enhanced by bile acid in the presence of sodium dodecyl benzene sulfonate (SDBS). Under the optimum conditions, the enhanced luminescence intensity of the system exhibited a good linear relationship with the bile acid concentration in the range 5.0 Χ 10{sup -9} - 7.0 Χ 10{sup -7} mol L{sup -1} with a detection limit of 1.3 Χ 10{sup -9} mol L.1 (3σ). The relative standard deviation (RSD) was 1.7% (n = 11) for 5.0 Χ 10{sup -8} mol L{sup -1} bile acid. The applicability of the method to the determination of bile acid was demonstrated by investigating the effect of potential interferences and by analyzing human serum and urine samples. The possible enhancement mechanism of luminescence intensity in balofloxacin-europium(III)-bile acid-SDBS system was also discussed briefly.

  2. Investigation of the influence of silver and tin on the luminescence of trivalent europium ions in glass

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez, J.A. [Department of Chemistry, University of Puerto Rico, Mayagueez, PR 00681 (United States); Lysenko, S. [Department of Physics, University of Puerto Rico, Mayagueez, PR 00681 (Puerto Rico); Liu, H., E-mail: hliu@uprm.ed [Department of Physics, University of Puerto Rico, Mayagueez, PR 00681 (Puerto Rico); Fachini, E.; Cabrera, C.R. [Center for Nanoscale Materials, University of Puerto Rico, Rio Piedras, PR 00931 (Puerto Rico)

    2010-01-15

    Europium-doped aluminophosphate glasses prepared by the melt-quenching technique have been studied by photoluminescence (PL) and X-ray photoelectron spectroscopy (XPS). The effects of silver and tin doping, and of further thermal processing on Eu{sup 3+} ions luminescence have been assessed. For the glass system containing only europium, Eu{sup 3+} PL observed under UV excitation is suggested to occur through energy transfer from the excited glass host. After silver and tin doping, an enhanced UV excited Eu{sup 3+} PL has been indicated to occur essentially due to radiative energy transfer from isolated Ag{sup +} ions and/or two fold-coordinated Sn centers. Since thermal processing of the material leads to a quenching effect on Eu{sup 3+} PL and Ag nanoparticles (NPs) formation due to reduction of silver ions by tin, XPS was employed in order to investigate the possibility for Eu{sup 3+}->Eu{sup 2+} reduction during HT as a potential source of the PL decrease. The data points towards Ag NPs as main responsible for the observed weakening of Eu{sup 3+} PL.

  3. Behaviour of europium (III) and its hydroxo and carbonate complexes in a solvent extraction system with HDBM in 2 M NaCl at 303 K

    Energy Technology Data Exchange (ETDEWEB)

    Jimenez-Reyes, M. [Inst. Nacional de Investigaciones Nucleares, Dept. de Quimica, Mexico, D. F. (Mexico); Univ. Autonoma Metropolitana-Iztapalapa, Area de Electroquimica, Mexico, D. F. (Mexico); Solache-Rios, M. [Inst. Nacional de Investigaciones Nucleares, Dept. de Quimica, Mexico, D. F. (Mexico); Rojas-Hernandez, A. [Univ. Autonoma Metropolitana-Iztapalapa, Area de Electroquimica, Mexico, D. F. (Mexico)

    1999-07-01

    The behaviour of europium in the solvent extraction system Eu{sup 3+}-water-2 M NaCl-HDBM-benzene was studied, taking into account the pC{sub H} and the carbonate ion concentration in the solutions. The stability constants for the hydrolysis and carbonate complexes of europium were determined at 303 K in the same medium by pH titration followed by a computational refinement. The obtained data were: log {beta}{sub Eu,H} = -8.29 {+-} 0.02, log {beta}{sub Eu,2H} = -16.37 {+-} 0.02, log {beta}{sub Eu,3H} = -24.54 {+-} 0.11, log {beta}{sub Eu,4H} = -34.91 {+-} 0.26, log {beta}{sub CO{sub 2}{sup 2-},H} = 9.30 {+-} 0.05, log {beta}{sub Eu,CO{sub 3}{sup 2-}} = 5.96 {+-} 0.03, log {beta}{sub Eu,CO{sub 3}{sup 2-},H} = -1.24 {+-} 0.05 and log {beta}{sub Eu,CO{sub 3}{sup 2-},2H} = -11.39 {+-} 0.11. Log K{sub W} was -13.78 {+-} 0.06. The behaviour of europium in this solvent extraction system was simulated, taking into account the hydrolysis and carbonate complexes plus the formation of Eu(DBM){sub 3}(OH){sup 1-} and Eu(DBM){sub 3}(CO{sub 3}){sup 2-} in the aqueous phase. The only europium species considered in the organic phase was Eu(DBM){sub 3}. The first hydrolysis constant of europium was also determined by using this solvent extraction system under the same conditions. A good conformity was found with the results obtained by both techniques. (orig.)

  4. Bis(acridine-9-carboxylate)-nitro-europium(III) dihydrate complex a new apoptotic agent through Flk-1 down regulation, caspase-3 activation and oligonucleosomes DNA fragmentation.

    Science.gov (United States)

    Azab, Hassan A; Hussein, Belal H M; El-Azab, Mona F; Gomaa, Mohamed; El-Falouji, Abdullah I

    2013-01-01

    New bis(acridine-9-carboxylate)-nitro-europium(III) dihydrate complex was synthesized and characterized. In vivo anti-angiogenic activities of bis(acridine-9-carboxylate)-nitro-europium(III) dihydrate complex against Ehrlich ascites carcinoma (EAC) cells are described. The newly synthesized complex resulted in inhibition of proliferation of EAC cells and ascites formation. The anti-tumor effect was found to be through anti-angiogenic activity as evident by the reduction of microvessel density in EAC solid tumors. The anti-angiogenic effect is mediated through down-regulation of VEGF receptor type-2 (Flk-1). The complex was also found to significantly increase the level of caspase-3 in laboratory animals compared to the acridine ligand and to the control group. This was also consistent with the DNA fragmentation detected by capillary electrophoresis that proved the apoptotic effect of the new complex. Our complex exhibited anti-angiogenic and apoptotic activity in vivo, a thing that makes it a potential effective chemotherapeutic agent. The interaction of calf thymus DNA (ct-DNA) with bis(acridine-9-carboxylate)-nitro-europium(III) dihydrate complex has been investigated using fluorescence technique. A competitive experiment of the europium(III)-acridine complex with ethidium bromide (EB) to bind DNA revealed that interaction between the europium(III)-acridine and DNA was via intercalation. The interaction of the synthesized complex with tyrosine kinases was also studied using molecular docking simulation to further substantiate its mode of action. Copyright © 2012 Elsevier Ltd. All rights reserved.

  5. Monolayer Iron Carbide Films on Au(111) as a Fischer–Tropsch Model Catalyst

    DEFF Research Database (Denmark)

    Mannie, Gilbère; Lammich, Lutz; Li, Yong-Wang

    2014-01-01

    Using scanning tunneling microscopy (STM), we characterize the atomic-scale details of ultrathin films of iron carbide (FexCy) on Au(111) synthesized as a potential model system for the active iron carbide phase in iron Fischer–Tropsch synthesis (FTS) catalysts. The experiments show that room...

  6. Microstructural evaluation of the NbC-20Ni cemented carbides during sintering

    Energy Technology Data Exchange (ETDEWEB)

    Rodrigues, D. [BRATS Sintered Filters and Metallic Powders, Cajamar, SP (Brazil); Cannizza, E. [EHT Cannizza Consultoria Em Engenharia Ltda, Sao Paulo, SP (Brazil)

    2016-07-01

    Full text: Fine carbides in a metallic matrix (binder) form the microstructure of the cemented carbides. Grain size and binder content are the main variables to adjust hardness and toughness. These products are produced by Powder Metallurgy, and traditional route involves mixing carbides with binder by high energy milling, pressing and sintering. During sintering, a liquid phase promotes densification, and a final relative density higher than 99% is expected. Sintering is carried out at high temperatures, and dissolution of the carbides changes the chemical composition of the binder. To control grain growth of the main carbide, which reduces hardness, small quantities of secondary carbides are used. These additives limit dissolution and precipitation of the main carbides reducing the final grain size. This paper focused the structural and chemical evolution during sintering using NbC-20Ni cermets. Mixtures of very fine NbC carbides and carbonyl Ni powders were produce by intense milling. These mixtures were pressed using uniaxial pressures from 50 to 200MPa. Shrinkage was evaluated using dilatometric measurements under an atmosphere of dynamic argon. Samples were also sintered under vacuum in high temperature industrial furnace. The sintered samples were characterized in terms of density hardness, toughness and microstructure. DRX was the main tool used to evaluate the structural evolution of the binder. In situ chemical analysis helped to understand the dissolution mechanisms. (author)

  7. Plasma-Chemical Synthesis of Nanosized Powders-Nitrides, Carbides, Oxides, Carbon Nanotubes and Fullerenes

    Science.gov (United States)

    Katerina, Zaharieva; Gheorghi, Vissokov; Janis, Grabis; Slavcho, Rakovsky

    2012-11-01

    In this article the plasma-chemical synthesis of nanosized powders (nitrides, carbides, oxides, carbon nanotubes and fullerenes) is reviewed. Nanosized powders - nitrides, carbides, oxides, carbon nanotubes and fullerenes have been successfully produced using different techniques, technological apparatuses and conditions for their plasma-chemical synthesis.

  8. Natural precursor based hydrothermal synthesis of sodium carbide for reactor applications

    Science.gov (United States)

    Swapna, M. S.; Saritha Devi, H. V.; Sebastian, Riya; Ambadas, G.; Sankararaman, S.

    2017-12-01

    Carbides are a class of materials with high mechanical strength and refractory nature which finds a wide range of applications in industries and nuclear reactors. The existing synthesis methods of all types of carbides have problems in terms of use of toxic chemical precursors, high-cost, etc. Sodium carbide (Na2C2) which is an alkali metal carbide is the least explored one and also that there is no report of low-cost and low-temperature synthesis of sodium carbide using the eco-friendly, easily available natural precursors. In the present work, we report a simple low-cost, non-toxic hydrothermal synthesis of refractory sodium carbide using the natural precursor—Pandanus. The formation of sodium carbide along with boron carbide is evidenced by the structural and morphological characterizations. The sample thus synthesized is subjected to field emission scanning electron microscopy (FESEM), x-ray powder diffraction (XRD), ultraviolet (UV)—visible spectroscopy, Fourier transform infrared spectroscopy (FTIR), Raman, and photoluminescent (PL) spectroscopic techniques.

  9. Properties and characterization of multilayers of carbides and diamond-like carbon

    NARCIS (Netherlands)

    Strondl, C.; Kolk, G.J. van der; Hurkmans, T.; Fleischer, W.; Trinh, T.; Marcolino Carvalho, Nuno; Hosson, J.Th.M. de

    Metal containing diamond-like carbon (Me-DLC) coatings are widely applied in industrial applications. Normally, the coatings are produced with small inclusions of carbide forming elements like the 3d, 4d or 5d metals, or Si or B. The small carbide islands have sizes of approximately 2-20 nm. The

  10. Microstructures and Wear Performance of PTAW Deposited Ni-Based Coatings with Spherical Tungsten Carbide

    Directory of Open Access Journals (Sweden)

    Dewei Deng

    2015-10-01

    Full Text Available The Ni-based coatings with different content of spherical tungsten carbide were deposited by plasma transfer arc welding (PTAW method on 304 austenitic stainless steel sheets in this study. The microstructure and wear property of spherical tungsten carbide particle reinforced composite coatings were investigated by means of optical microscope, scanning electron microscope (SEM, X-ray diffraction (XRD, electron probe microanalysis (EPMA and sliding wear test. It is shown that the fraction of spherical tungsten carbides has an important influence on microstructure of Ni-based overlay. The Ni40 overlay consists of γ-Ni dendrites with interdendritic Ni-based eutectics, borides and carbides improving the wear resistance. In the case of composite coatings with different content of tungsten carbide, many new phases are observed, such as Ni2W4C and NiW. In addition, there are a large number of irregular structures in composite coatings, such as acicular structure and irregular stripe organization. The results of sliding wear test indicate that the mass loss of coatings is influenced by the content of tungsten carbide. The mass loss decreases with the increase of tungsten carbide fraction. At high load, the abrasive resistance of composite coating with 60 wt. % tungsten carbide is improved about 50-fold compared to that of Ni40 overlay.

  11. Stereological parameters of carbides on section of casting made from modified chromium cast iron

    Directory of Open Access Journals (Sweden)

    A. Studnicki

    2011-07-01

    Full Text Available The analysis of stereological parameters of carbides on the section of the model castingmade from modified (the mixture FeNb+FeV+RE wear resistance chromium cast iron was introduced in the article. The jump change of some stereological parameters of carbides in certain distance from the surface of the casting was observed.

  12. Development of a Robust Tri-Carbide Fueled Reactor for Multimegawatt Space Power and Propulsion Applications

    Energy Technology Data Exchange (ETDEWEB)

    Samim Anghaie; Travis W. Knight; Johann Plancher; Reza Gouw

    2004-08-11

    An innovative reactor core design based on advanced, mixed carbide fuels was analyzed for nuclear space power applications. Solid solution, mixed carbide fuels such as (U,Zr,Nb)c and (U,Zr, Ta)C offer great promise as an advanced high temperature fuel for space power reactors.

  13. Synthesis of nanoparticles of vanadium carbide in the ferrite of nodular cast iron

    CERN Document Server

    Fras, E; Guzik, E; Lopez, H

    2005-01-01

    The synthesis method of nanoparticles of vanadium carbide in nodular cast iron is presented. After introduction of this method, the nanoparticles with 10-70 nm of diameter was obtained in the ferrite. The diffraction investigations confirmed that these particles are vanadium carbides of type V/sub 3/C/sub 4/.

  14. Calcium carbide (CaC2): Effect on fruit set and yield of mango ...

    African Journals Online (AJOL)

    Calcium carbide (CaC2): Effect on fruit set and yield of mango ( Mangifera indica L.) cv. ... photosynthetic rate, final fruit drop, yield per plant, fruit weight, fruit volume, pulp weight, peel weight, juice weight and fruit skin color were significantly affected by the calcium carbide treatment while number of new flushes per branch, ...

  15. Synthesis of functional acetylene derivatives from calcium carbide.

    Science.gov (United States)

    Lin, Zhewang; Yu, Dingyi; Sum, Yin Ngai; Zhang, Yugen

    2012-04-01

    AHA Erlebnis: CaC(2), used to produce acetylene until several decades ago, is re-emerging as a cheap, sustainable resource synthesized from coal and lignocellulosic biomass. We report efficient catalytic protocols for the synthesis of functional acetylene derivatives from CaC(2) through aldehyde, alkyne, and amine (AAA) as well as alkyne, haloalkane, and amine (AHA) couplings, and in addition demonstrate its use in click and Sonogashira chemistry, showing that calcium carbide is a sustainable and cost-efficient carbon source. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Method of fabricating silicon carbide coatings on graphite surfaces

    Science.gov (United States)

    Varacalle, D.J. Jr.; Herman, H.; Burchell, T.D.

    1994-07-26

    The vacuum plasma spray process produces well-bonded, dense, stress-free coatings for a variety of materials on a wide range of substrates. The process is used in many industries to provide for the excellent wear, corrosion resistance, and high temperature behavior of the fabricated coatings. In this application, silicon metal is deposited on graphite. This invention discloses the optimum processing parameters for as-sprayed coating qualities. The method also discloses the effect of thermal cycling on silicon samples in an inert helium atmosphere at about 1,600 C which transforms the coating to silicon carbide. 3 figs.

  17. Temperature Induced Voltage Offset Drifts in Silicon Carbide Pressure Sensors

    Science.gov (United States)

    Okojie, Robert S.; Lukco, Dorothy; Nguyen, Vu; Savrun, Ender

    2012-01-01

    We report the reduction of transient drifts in the zero pressure offset voltage in silicon carbide (SiC) pressure sensors when operating at 600 C. The previously observed maximum drift of +/- 10 mV of the reference offset voltage at 600 C was reduced to within +/- 5 mV. The offset voltage drifts and bridge resistance changes over time at test temperature are explained in terms of the microstructure and phase changes occurring within the contact metallization, as analyzed by Auger electron spectroscopy and field emission scanning electron microscopy. The results have helped to identify the upper temperature reliable operational limit of this particular metallization scheme to be 605 C.

  18. Surface coating metrology of carbides of cutting tools

    Science.gov (United States)

    Parfenov, V. D.; Basova, G. D.

    2017-10-01

    The coatings were studied by their main sign of the micrometric thickness by means of coating destruction and electron microscopical study of cleavage surfaces. Shock stress ruptures of heated carbides of cutting tools were performed. The discovery of the coating technology and creation of the coating structure for nonuniform and nonequilibrium conditions of the cutting process were dealt with. Multifracture microdestruction of nitride coatings, caused by complex external influences, was analysed to reveal the mechanism of interaction of elementary failures. Positive results were obtained in the form of improving the strength and wear resistance of the product, crack resistance increasing.

  19. Improvement of contact resistances on plasma-exposed silicon carbide

    Science.gov (United States)

    Cheung, R.; Hay, J.; van der Drift, E.; Gao, W.

    2000-11-01

    We demonstrate improvements in the specific contact resistance of unannealed ohmic contacts by at least one order of magnitude on undoped 6H-SiC (silicon carbide, SiC). The improved contacts with a specific resistance of 0.3 Ω cm 2 have been fabricated on SiC surfaces exposed to an argon plasma at -80 V for 2.5 min. Under these plasma conditions, the top monolayers of the plasma-exposed SiC surface is silicon rich as revealed by X-ray photoelectron spectroscopy, and the surface roughness is decreased by a factor of 2 from atomic force microscopy analysis.

  20. Growth of Vanadium Carbide by Halide-Activated Pack Diffusion

    DEFF Research Database (Denmark)

    Fernandes, Frederico Augusto Pires; Christiansen, Thomas Lundin; Dahl, Kristian Vinter

    The present work investigates growth of vanadium carbide (VC) layers by the pack diffusion method on a Vanadis 6 tool steel. The VC layers were produced by pack diffusion at 1000°C for 1, 4 and 16 hours. The VC layers were characterized with optical and electron microscopy, Vickers hardness tests...... and X-ray diffraction. Homogeneous VC mono-phase layers with Vickers hardness of more than 2400 HV were obtained. Hardening and tempering of the vanadized Vanadis 6 steel did not affect the VC layers....

  1. High-Temperature Electronic Materials: Silicon Carbide and Diamond

    Science.gov (United States)

    Willander, Magnus; Friesel, Milan; Wahab, Qamar-Ul; Straumal, Boris

    The physical and chemical properties of wide-band-gap semiconductors make these materials an ideal choice for device fabrication for applications in many different areas, e.g. light emitters, high-temperature and high-power electronics, high-power microwave devices, micro-electromechanical system (MEM) technology, and substrates for semiconductor preparation. These semiconductors have been recognized for several decades as being suitable for these applications, but until recently the low material quality has not allowed the fabrication of high-quality devices. In this chapter, we review the wide-band-gap semiconductors, silicon carbide and diamond.

  2. Characterization of plastic and boron carbide additive manufactured neutron collimators

    Science.gov (United States)

    Stone, M. B.; Siddel, D. H.; Elliott, A. M.; Anderson, D.; Abernathy, D. L.

    2017-12-01

    Additive manufacturing techniques allow for the production of materials with complicated geometries with reduced costs and production time over traditional methods. We have applied this technique to the production of neutron collimators for use in thermal and cold neutron scattering instrumentation directly out of boron carbide. We discuss the design and generation of these collimators. We also provide measurements at neutron scattering beamlines which serve to characterize the performance of these collimators. Additive manufacturing of parts using neutron absorbing material may also find applications in radiography and neutron moderation.

  3. ɛ-Iron carbide as a low-temperature Fischer-Tropsch synthesis catalyst

    Science.gov (United States)

    Xu, Ke; Sun, Bo; Lin, Jun; Wen, Wen; Pei, Yan; Yan, Shirun; Qiao, Minghua; Zhang, Xiaoxin; Zong, Baoning

    2014-12-01

    ɛ-Iron carbide has been predicted to be promising for low-temperature Fischer-Tropsch synthesis (LTFTS) targeting liquid fuel production. However, directional carbidation of metallic iron to ɛ-iron carbide is challenging due to kinetic hindrance. Here we show how rapidly quenched skeletal iron featuring nanocrystalline dimensions, low coordination number and an expanded lattice may solve this problem. We find that the carbidation of rapidly quenched skeletal iron occurs readily in situ during LTFTS at 423-473 K, giving an ɛ-iron carbide-dominant catalyst that exhibits superior activity to literature iron and cobalt catalysts, and comparable to more expensive noble ruthenium catalyst, coupled with high selectivity to liquid fuels and robustness without the aid of electronic or structural promoters. This finding may permit the development of an advanced energy-efficient and clean fuel-oriented FTS process on the basis of a cost-effective iron catalyst.

  4. ε-Iron carbide as a low-temperature Fischer-Tropsch synthesis catalyst.

    Science.gov (United States)

    Xu, Ke; Sun, Bo; Lin, Jun; Wen, Wen; Pei, Yan; Yan, Shirun; Qiao, Minghua; Zhang, Xiaoxin; Zong, Baoning

    2014-12-12

    ε-Iron carbide has been predicted to be promising for low-temperature Fischer-Tropsch synthesis (LTFTS) targeting liquid fuel production. However, directional carbidation of metallic iron to ε-iron carbide is challenging due to kinetic hindrance. Here we show how rapidly quenched skeletal iron featuring nanocrystalline dimensions, low coordination number and an expanded lattice may solve this problem. We find that the carbidation of rapidly quenched skeletal iron occurs readily in situ during LTFTS at 423-473 K, giving an ε-iron carbide-dominant catalyst that exhibits superior activity to literature iron and cobalt catalysts, and comparable to more expensive noble ruthenium catalyst, coupled with high selectivity to liquid fuels and robustness without the aid of electronic or structural promoters. This finding may permit the development of an advanced energy-efficient and clean fuel-oriented FTS process on the basis of a cost-effective iron catalyst.

  5. ROLE OF GRAIN BOUNDARY CARBIDES IN CRACKING BEHAVIOR OF Ni BASE ALLOYS

    Directory of Open Access Journals (Sweden)

    SEONG SIK HWANG

    2013-02-01

    Full Text Available The primary water stress corrosion cracking (PWSCC of Alloy 600 in a PWR has been reported in the control rod drive mechanism (CRDM, pressurizer instrumentation, and the pressurizer heater sleeves. Recently, two cases of boric acid precipitation that indicated leaking of the primary cooling water were reported on the bottom head surface of steam generators (SG in Korea. The PWSCC resistance of Ni base alloys which have intergranular carbides is higher than those which have intragranular carbides. Conversely, in oxidized acidic solutions like sodium sulfate or sodium tetrathionate solutions, the Ni base alloys with a lot of carbides at the grain boundaries and shows less stress corrosion cracking (SCC resistance. The role of grain boundary carbides in SCC behavior of Ni base alloys was evaluated and effect of intergranular carbides on the SCC susceptibility were reviewed from the literature.

  6. Method of testing carbide inserts for premature fracture by face milling of cylindrical workpieces

    Science.gov (United States)

    Kitagawa, R.; Akasawa, T.; Okusa, K.

    1984-12-01

    Methods are proposed for face milling solid cylindrical workpieces or half-cut and hollow cylindrical workpieces prepared from rectangular blocks by continuously changing both or either of the angles of engagement and disengagement. Carbide inserts are tested for premature fracture before the onset of steady wear using these face-milling methods. The premature fracture indicates the insufficient toughness of carbides to perform a given machining job. As carbides of higher wear resistance have lower shock resistance in general, they must be tested for premature fracture due to the lack of toughness to select suitable carbides for specific cutting applications. The test results obtained under the present study show that the premature fracture of carbides, whose toughness was classified by static toughness tests, can be evaluated dynamically and easily by the proposed face-milling methods.

  7. Europium(III) reduction and speciation within a Wells-Dawson heteropolytungstate.

    Science.gov (United States)

    Jing, Jing; Burton-Pye, Benjamin P; Francesconi, Lynn C; Antonio, Mark R

    2008-08-04

    The redox speciation of Eu(III) in the 1:1 stoichiometric complex with the alpha-1 isomer of the Wells-Dawson anion, [alpha-1-P 2W 17O 61] (10-), was studied by electrochemical techniques (cyclic voltammetry and bulk electrolysis), in situ XAFS (X-ray absorption fine structure) spectroelectrochemistry, NMR spectroscopy ( (31)P), and optical luminescence. Solutions of K 7[(H 2O) 4Eu(alpha-1-P 2W 17O 61)] in a 0.2 M Li 2SO 4 aqueous electrolyte (pH 3.0) show a pronounced concentration dependence to the voltammetric response. The fully oxidized anion and its reduced forms were probed by Eu L 3-edge XANES (X-ray absorption near edge structure) measurements in simultaneous combination with controlled potential electrolysis, demonstrating that Eu(III) in the original complex is reduced to Eu(II) in conjunction with the reduction of polyoxometalate (POM) ligand. After exhaustive reduction, the heteropoly blue species with Eu(II) is unstable with respect to cluster isomerization, fragmentation, and recombination to form three other Eu-POMs as well as the parent Wells-Dawson anion, alpha-[P 2W 18O 62] (6-). EXAFS data obtained for the reduced, metastable Eu(II)-POM before the onset of Eu(II) autoxidation provides an average Eu-O bond length of 2.55(4) A, which is 0.17 A longer than that for the oxidized anion, and consistent with the 0.184 A difference between the Eu(II) and Eu(III) ionic radii. The reduction of Eu(III) is unusual among POM complexes with Lindqvist and alpha-2 isomers of Wells-Dawson anions, that is, [Eu(W 5O 18) 2] (9-) and [Eu(alpha-2-As 2W 17O 61) 2] (17-), but not to the Preyssler complex anion, [EuP 5W 30O 110] (12-), and fundamental studies of materials based on coupling Eu and POM redox properties are still needed to address new avenues of research in europium hydrometallurgy, separations, and catalysis sciences.

  8. Structural, optical and electrical properties of europium picrate tetraethylene glycol complex as emissive material for OLED

    Energy Technology Data Exchange (ETDEWEB)

    Kusrini, Eny, E-mail: ekusrini@che.ui.ac.id [Department of Chemical Engineering, Faculty of Engineering, Universitas Indonesia, 16424 Depok (Indonesia); Saleh, Muhammad I.; Adnan, Rohana [School of Chemical Sciences, Universiti Sains Malaysia, 11800 Penang (Malaysia); Yulizar, Yoki [Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Indonesia, 16424 Depok (Indonesia); Sha Shiong, Ng; Fun, H.K. [School of Physics, Universiti Sains Malaysia, 11800 Penang (Malaysia); Adhha Abdullah, M.A.; Mamat, Mazidah [Department of Chemical Sciences, Faculty of Science and Technology, Universiti Malaysia Terengganu, 21030 Kuala Terengganu, Terengganu Darul Iman (Malaysia); Za' aba, N.K.; Abd. Majid, W.H. [Solid State Research Laboratory, Department of Physics, Universiti Malaya, 50603 Kuala Lumpur (Malaysia)

    2012-01-15

    A new europium complex [Eu(Pic){sub 2}(H{sub 2}O)(EO4)](Pic).0.75H{sub 2}O was synthesized and used as the emission material for the single layer device structure of ITO/EO4-Eu-Pic/Al, using a spin-coating technique. Study on the optical properties of the [Eu(Pic){sub 2}(H{sub 2}O)(EO4)](Pic).0.75H{sub 2}O complex where EO4=tetraethylene glycol and Pic=picrate anion, had to be undertaken before being applicable to the study of an organic light emitting diode (OLED). The electrical property of an OLED using current-voltage (I-V) measurement was also studied. In complex, the Eu(III) ion was coordinated with the EO4 ligand as a pentadentate mode, one water molecule, and with two Pic anions as bidentate and monodentate modes, forming a nine-coordination number. The photoluminescence (PL) spectra of the crystalline complex in the solid state and its thin film showed a hypersensitive peak at 613.5-614.9 nm that assigned to the {sup 5}D{sub 0}{yields}{sup 7}F{sub 2} transition. A narrow band emission from the thin film EO4-Eu-Pic was obtained. The typical semiconductor I-V curve of device ITO/EO4-Eu-Pic/Al showed the threshold and turn on voltages at 1.08 and 4.6 V, respectively. The energy transfer process from the ligand to the Eu(III) ion was discussed by investigating the excitation and PL characteristics. Effect of the picrate anion on the device performance was also studied. - Highlights: > The [Eu(Pic){sub 2}(H{sub 2}O)(EO4)](Pic).0.75(H{sub 2}O) is crystallized in triclinic with space group P-1. > The complex is applied as a emissive center in single layer device structure of ITO/EO4-Eu-Pic/Al. > The complex displays a red luminescence in both the crystalline complex and its thin film state. > The low turn on voltage of the device (4.6 V), indicating that this material is suitable for OLED. > The roughness and morphology of the thin film affects luminance and electrical properties of OLED.

  9. Low-temperature synthesis of silicon carbide powder using shungite

    Energy Technology Data Exchange (ETDEWEB)

    Gubernat, A.; Pichor, W.; Lach, R.; Zientara, D.; Sitarz, M.; Springwald, M.

    2017-07-01

    The paper presents the results of investigation the novel and simple method of synthesis of silicon carbide. As raw material for synthesis was used shungite, natural mineral rich in carbon and silica. The synthesis of SiC is possible in relatively low temperature in range 1500–1600°C. It is worth emphasising that compared to the most popular method of SiC synthesis (Acheson method where the temperature of synthesis is about 2500°C) the proposed method is much more effective. The basic properties of products obtained from different form of shungite and in wide range of synthesis temperature were investigated. The process of silicon carbide formation was proposed and discussed. In the case of synthesis SiC from powder of raw materials the product is also in powder form and not requires any additional process (crushing, milling, etc.). Obtained products are pure and after grain classification may be used as abrasive and polishing powders. (Author)

  10. Low-temperature synthesis of silicon carbide powder using shungite

    Directory of Open Access Journals (Sweden)

    Agnieszka Gubernat

    2017-01-01

    Full Text Available The paper presents the results of investigation the novel and simple method of synthesis of silicon carbide. As raw material for synthesis was used shungite, natural mineral rich in carbon and silica. The synthesis of SiC is possible in relatively low temperature in range 1500–1600 °C. It is worth emphasising that compared to the most popular method of SiC synthesis (Acheson method where the temperature of synthesis is about 2500 °C the proposed method is much more effective. The basic properties of products obtained from different form of shungite and in wide range of synthesis temperature were investigated. The process of silicon carbide formation was proposed and discussed. In the case of synthesis SiC from powder of raw materials the product is also in powder form and not requires any additional process (crushing, milling, etc.. Obtained products are pure and after grain classification may be used as abrasive and polishing powders.

  11. A highly luminescent octanuclear gold(i) carbide cluster.

    Science.gov (United States)

    Feuerstein, Thomas J; Poß, Marieke; Seifert, Tim P; Bestgen, Sebastian; Feldmann, Claus; Roesky, Peter W

    2017-08-08

    The ligand [{Me3SiC[triple bond, length as m-dash]CC(NDipp)2}Li(thf)3] (Dipp = 2,6-diisopropylphenyl) was used for salt metathesis reactions with [AuCl(tht)] (tht = tetrahydrothiophene) to obtain the dinuclear alkyne functionalized bisamidinate [{Me3SiC[triple bond, length as m-dash]CC(NDipp)2}2Au2]. This compound serves as a building block for the polynuclear carbide bridged gold(i) amidinate complex [Au8{μ3-(η1:η2-C[triple bond, length as m-dash]C)}2(Me3SiC[triple bond, length as m-dash]CC(NDipp)2)4(tht)2], which is the first gold(i) complex with a μ3-η1:η2 carbide coordination. Both gold(i) compounds show distinct aurophilic interactions and are remarkably stable at ambient conditions. Photophysical investigations revealed intense luminescence with notable high quantum yields both in the solid state and in solution.

  12. The Local Physical Structure of Amorphous Boron Carbide Thin Films

    Science.gov (United States)

    Paquette, M. M.; Li, Wenjing; Driver, M. S.; Oyler, N. A.; Caruso, A. N.

    2011-03-01

    Thin-film amorphous hydrogenated boron carbide (a-B5 C:Hx) and technical boron carbide (B4 C:Cy) are important materials in next-generation solid-state neutron detectors and refractory electronics. Optimizing the electrical carrier transport and electronic structure of these films for the stated applications has been severely hindered by: (1) their lack of long-range periodicity; (2) the ability of boron-rich solids to form complex polyhedra; and, (3) the possibility that carbon atoms incorporate into the polyhedral structures in an intraicosahedral fashion or that they bridge polyhedral structures in an intericosahedral fashion. The use of traditional spectroscopies that are sensitive to local coordination environment have been inadequate in the determination of the local physical structure because of either poor resolution or very low interaction cross sections. However, magic spinning angle (MAS) solid-state nuclear magnetic resonance (SSNMR), does have the signal-to-noise and rigor to extract the local physical coordination structure of these materials, despite the challenges associated with deltahedra-based structures. This poster will describe the progress and challenges in structure determination through a comparison of unknown samples to known calibration standards using MAS techniques, in the context of furthering the general understanding of the electronic structure of a-B5 C:Hx and B4 C:Cy thin films.

  13. High Input Voltage, Silicon Carbide Power Processing Unit Performance Demonstration

    Science.gov (United States)

    Bozak, Karin E.; Pinero, Luis R.; Scheidegger, Robert J.; Aulisio, Michael V.; Gonzalez, Marcelo C.; Birchenough, Arthur G.

    2015-01-01

    A silicon carbide brassboard power processing unit has been developed by the NASA Glenn Research Center in Cleveland, Ohio. The power processing unit operates from two sources: a nominal 300 Volt high voltage input bus and a nominal 28 Volt low voltage input bus. The design of the power processing unit includes four low voltage, low power auxiliary supplies, and two parallel 7.5 kilowatt (kW) discharge power supplies that are capable of providing up to 15 kilowatts of total power at 300 to 500 Volts (V) to the thruster. Additionally, the unit contains a housekeeping supply, high voltage input filter, low voltage input filter, and master control board, such that the complete brassboard unit is capable of operating a 12.5 kilowatt Hall effect thruster. The performance of the unit was characterized under both ambient and thermal vacuum test conditions, and the results demonstrate exceptional performance with full power efficiencies exceeding 97%. The unit was also tested with a 12.5kW Hall effect thruster to verify compatibility and output filter specifications. With space-qualified silicon carbide or similar high voltage, high efficiency power devices, this would provide a design solution to address the need for high power electric propulsion systems.

  14. High Input Voltage, Silicon Carbide Power Processing Unit Performance Demonstration

    Science.gov (United States)

    Bozak, Karin E.; Pinero, Luis R.; Scheidegger, Robert J.; Aulisio, Michael V.; Gonzalez, Marcelo C.; Birchenough, Arthur G.

    2015-01-01

    A silicon carbide brassboard power processing unit has been developed by the NASA Glenn Research Center in Cleveland, Ohio. The power processing unit operates from two sources - a nominal 300-Volt high voltage input bus and a nominal 28-Volt low voltage input bus. The design of the power processing unit includes four low voltage, low power supplies that provide power to the thruster auxiliary supplies, and two parallel 7.5 kilowatt power supplies that are capable of providing up to 15 kilowatts of total power at 300-Volts to 500-Volts to the thruster discharge supply. Additionally, the unit contains a housekeeping supply, high voltage input filter, low voltage input filter, and master control board, such that the complete brassboard unit is capable of operating a 12.5 kilowatt Hall Effect Thruster. The performance of unit was characterized under both ambient and thermal vacuum test conditions, and the results demonstrate the exceptional performance with full power efficiencies exceeding 97. With a space-qualified silicon carbide or similar high voltage, high efficiency power device, this design could evolve into a flight design for future missions that require high power electric propulsion systems.

  15. Microstructure and mechanical properties of proton irradiated zirconium carbide

    Energy Technology Data Exchange (ETDEWEB)

    Yang Yong [Department of Engineering Physics, University of Wisconsin-Madison, Madison, WI 53706 (United States)], E-mail: yyang@cae.wisc.edu; Dickerson, Clayton A.; Swoboda, Hannah [Material Science Program, University of Wisconsin-Madison, Madison, WI 53706 (United States); Miller, Brandon; Allen, Todd R. [Department of Engineering Physics, University of Wisconsin-Madison, Madison, WI 53706 (United States)

    2008-09-01

    Zirconium carbide is a candidate ceramic being considered for metal-carbide-base composite-type fuels, as well as for an alternative coating material for TRISO particle fuels. Ensuring adequate mechanical properties and dimensional stability in response to radiation is a key part in developing a practical ZrC-base fuel. The existing available radiation response data for ZrC is limited and insufficient. In the present study, ZrC was irradiated with a 2.6 MeV proton beam at 800 deg. C to doses of 0.7 and 1.5 dpa. Following radiation, the radiation induced damage microstructure is comprised of a high density of nanometer-sized Frank loops, but no irradiation induced amorphization, voids, or precipitates were observed. A slight lattice expansion was found in the irradiated ZrC, in good agreement with the reported results from neutron irradiation. The changes in microhardness and fracture toughness properties induced in the irradiated samples were measured using indentation techniques. The hardness and the fracture toughness both increase with increasing radiation dose.

  16. High capacitance of coarse-grained carbide derived carbon electrodes

    Science.gov (United States)

    Dyatkin, Boris; Gogotsi, Oleksiy; Malinovskiy, Bohdan; Zozulya, Yuliya; Simon, Patrice; Gogotsi, Yury

    2016-02-01

    We report exceptional electrochemical properties of supercapacitor electrodes composed of large, granular carbide-derived carbon (CDC) particles. Using a titanium carbide (TiC) precursor, we synthesized 70-250 μm sized particles with high surface area and a narrow pore size distribution. Electrochemical cycling of these coarse-grained powders defied conventional wisdom that a small particle size is strictly required for supercapacitor electrodes and allowed high charge storage densities, rapid transport, and good rate handling ability. The material showcased capacitance above 100 F g-1 at sweep rates as high as 250 mV s-1 in organic electrolyte. 250-1000 micron thick dense CDC films with up to 80 mg cm-2 loading showed superior areal capacitances. The material significantly outperformed its activated carbon counterpart in organic electrolytes and ionic liquids. Furthermore, large internal/external surface ratio of coarse-grained carbons allowed the resulting electrodes to maintain high electrochemical stability up to 3.1 V in ionic liquid electrolyte. In addition to presenting novel insights into the electrosorption process, these coarse-grained carbons offer a pathway to low-cost, high-performance implementation of supercapacitors in automotive and grid-storage applications.

  17. Carbide-based fuel system for undersea vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Burke, A. Alan; Carreiro, Louis G.; Greene, Eric S. [Naval Undersea Warfare Center, Division Newport (NUWCDIVNPT), 1176 Howell Street, Building 1302/2, Newport, RI 02841 (United States)

    2008-01-21

    In underwater applications such as unmanned undersea vehicle (UUV) propulsion, mass and volume constraints often dictate system energy density and specific energy, which are targeted to exceed 300 Wh L{sup -1} and 300 Wh kg{sup -1}, respectively, in order to compete with state-of-the-art battery technologies. To address this need, a novel carbide-based fuel system (CFS) intended for use with a solid oxide fuel cell (SOFC) is under development that is capable of achieving these energy metrics as well as sequestering carbon dioxide. The proposed CFS uses calcium carbide and calcium hydride that react with water to generate acetylene and hydrogen as the fuel and calcium hydroxide as a carbon dioxide scrubber. The acetylene is hydrogenated to ethane and then reformed to syngas (carbon monoxide and hydrogen) before being utilized by the SOFC. Carbon dioxide effluent from the SOFC is reacted with the calcium hydroxide to produce a storable solid, calcium carbonate, thus eliminating gas evolution from the UUV. A system configuration is proposed and discussion follows concerning energy storage metrics, operational parameters and preliminary safety analysis. (author)

  18. Detonation Synthesis of Alpha-Variant Silicon Carbide

    Science.gov (United States)

    Langenderfer, Martin; Johnson, Catherine; Fahrenholtz, William; Mochalin, Vadym

    2017-06-01

    A recent research study has been undertaken to develop facilities for conducting detonation synthesis of nanomaterials. This process involves a familiar technique that has been utilized for the industrial synthesis of nanodiamonds. Developments through this study have allowed for experimentation with the concept of modifying explosive compositions to induce synthesis of new nanomaterials. Initial experimentation has been conducted with the end goal being synthesis of alpha variant silicon carbide (α-SiC) in the nano-scale. The α-SiC that can be produced through detonation synthesis methods is critical to the ceramics industry because of a number of unique properties of the material. Conventional synthesis of α-SiC results in formation of crystals greater than 100 nm in diameter, outside nano-scale. It has been theorized that the high temperature and pressure of an explosive detonation can be used for the formation of α-SiC in the sub 100 nm range. This paper will discuss in detail the process development for detonation nanomaterial synthesis facilities, optimization of explosive charge parameters to maximize nanomaterial yield, and introduction of silicon to the detonation reaction environment to achieve first synthesis of nano-sized alpha variant silicon carbide.

  19. Boron doping of silicon rich carbides: Electrical properties

    Energy Technology Data Exchange (ETDEWEB)

    Summonte, C., E-mail: caterina.summonte@cnr.it [Consiglio Nazionale delle Ricerche – Istituto per la Microelettronica e i Microsistemi, Bologna (Italy); Canino, M.; Allegrezza, M.; Bellettato, M.; Desalvo, A. [Consiglio Nazionale delle Ricerche – Istituto per la Microelettronica e i Microsistemi, Bologna (Italy); Shukla, R. [Consiglio Nazionale delle Ricerche – Istituto per la Microelettronica e i Microsistemi, Bologna (Italy); Centre of Non-Conventional Energy Resources, University of Rajasthan, Jaipur (India); Jain, I.P. [Centre of Non-Conventional Energy Resources, University of Rajasthan, Jaipur (India); Crupi, I. [Consiglio Nazionale delle Ricerche – Istituto per la Microelettronica e i Microsistemi, Catania (Italy); Milita, S.; Ortolani, L. [Consiglio Nazionale delle Ricerche – Istituto per la Microelettronica e i Microsistemi, Bologna (Italy); López-Conesa, L.; Estradé, S.; Peiró, F.; Garrido, B. [MIND – UB, Electronics Department, University of Barcelona, Barcelona (Spain)

    2013-05-15

    Boron doped multilayers based on silicon carbide/silicon rich carbide, aimed at the formation of silicon nanodots for photovoltaic applications, are studied. X-ray diffraction confirms the formation of crystallized Si and 3C-SiC nanodomains. Fourier Transform Infrared spectroscopy indicates the occurrence of remarkable interdiffusion between adjacent layers. However, the investigated material retains memory of the initial dopant distribution. Electrical measurements suggest the presence of an unintentional dopant impurity in the intrinsic SiC matrix. The overall volume concentration of nanodots is determined by optical simulation and is shown not to contribute to lateral conduction. Remarkable higher room temperature dark conductivity is obtained in the multilayer that includes a boron doped well, rather than boron doped barrier, indicating efficient doping in the former case. Room temperature lateral dark conductivity up to 10{sup −3} S/cm is measured on the multilayer with boron doped barrier and well. The result compares favorably with silicon dioxide and makes SiC encouraging for application in photovoltaic devices.

  20. Transformation-toughening in cemented carbides: Part II. Thermomechanical treatments

    Science.gov (United States)

    Viswanadham, R. K.; Lindquist, P. G.

    1987-12-01

    WC-(Fe, Ni, C) cemented carbides can be successfully transformation-toughened by careful control of binder composition and taking into consideration the effect of thermal residual stress on the transformation characteristics of the binder. An additional degree of control on the metastability of the binder phase can be achieved via thermomechanical treatments. These treatments consist of transforming an austenitic binder to martensite by cooling in liquid nitrogen followed by a suitable high temperature heat treatment to reaustenitize it. The in situ deformation of the binder caused by the large shape and volume changes that accompany its transformation to martensite thus provides the mechanical component of the thermomechanical treatment. Subsequent heat treatments not only reaustenitize the binder but also modify its susceptibility to undergo stress-induced transformation. It is shown that the hardness/fracture toughness behavior of WC-(Fe, Ni, C) cemented carbides can be significantly improved by the application of such treatments. A qualitative explanation for the enhancements in fracture toughness provided by thermomechanical treatments is offered based on a careful examination of the changes in phase constitution of the binder that occur during these treatments.

  1. Ion beam figuring of CVD silicon carbide mirrors

    Science.gov (United States)

    Gailly, P.; Collette, J.-P.; Fleury Frenette, K.; Jamar, C.

    2017-11-01

    Optical and structural elements made of silicon carbide are increasingly found in space instruments. Chemical vapor deposited silicon carbide (CVD-SiC) is used as a reflective coating on SiC optics in reason of its good behavior under polishing. The advantage of applying ion beam figuring (IBF) to CVD-SiC over other surface figure-improving techniques is discussed herein. The results of an IBF sequence performed at the Centre Spatial de Liège on a 100 mm CVD-SiC mirror are reported. The process allowed to reduce the mirror surface errors from 243 nm to 13 nm rms . Beside the surface figure, roughness is another critical feature to consider in order to preserve the optical quality of CVD-SiC . Thus, experiments focusing on the evolution of roughness were performed in various ion beam etching conditions. The roughness of samples etched at different depths down to 3 ≠m was determined with an optical profilometer. These measurements emphasize the importance of selecting the right combination of gas and beam energy to keep roughness at a low level. Kaufman-type ion sources are generally used to perform IBF but the performance of an end-Hall ion source in figuring CVD-SiC mirrors was also evaluated in this study. In order to do so, ion beam etching profiles obtained with the end-Hall source on CVD-SiC were measured and used as a basis for IBF simulations.

  2. Synthesis of Luminescent Ink from Europium-Doped Y2O3 Dispersed in Polyvinyl Alcohol Solution

    Directory of Open Access Journals (Sweden)

    Astuti

    2009-01-01

    Full Text Available Luminescent ink from europium-doped Y2O3 ( Y2O3:Eu has been synthesized by two steps method: first, synthesis of luminescent powder of Y2O3:Eu by simple heating of metallic nitrates in a polymer solution and second, dispersing the powder in a polyvinyl alcohol (PVA solution. The stability of the ink (luminescent colloid was strongly affected by mixing process of the powder and the solution. Mixing process must be performed for a long time (about 8 hours at above room temperature to product stable colloids. We observed that mixing at 30–40∘C resulted in a stable and highly dispersed colloid. The writing test was performed on a white paper to show the potential use of the colloid for making security codes.

  3. Induced europium CPL for the selective signalling of phosphorylated amino-acids and O-phosphorylated hexapeptides.

    Science.gov (United States)

    Neil, Emily R; Fox, Mark A; Pal, Robert; Parker, David

    2016-05-17

    Two bright, europium(iii) complexes based on an achiral heptadentate triazacyclononane ligand bearing two strongly absorbing chromophores have been evaluated for the selective emission and CPL signalling of various chiral O-phosphono-anions. Binding of O-phosphono-Ser and Thr gives rise to a strong induced CPL signature and a favoured Δ complex configuration is adopted. A similarly large induced CPL signal arises when [Eu·](2+) binds to lysophosphatidic acid (LPA), where the strong binding (log K 5.25 (295 K)) in methanol allowed its detection over the range 5 to 40 μM. Strong and chemoselective binding to the phosphorylated amino-acid residues was also observed with a set of four structurally related hexapeptides: in one case, the sign of the gem value in the ΔJ = 1 transition allowed differentiation between the binding to O-P-Ser and O-P-Tyr residues.

  4. Magnetic composites based on metallic nickel and molybdenum carbide: A potential material for pollutants removal

    Energy Technology Data Exchange (ETDEWEB)

    Mambrini, Raquel V.; Fonseca, Thales L. [Departamento de Quimica, Universidade Federal de Minas Gerais, Belo Horizonte, MG 31270-901 (Brazil); Dias, Anderson [Departamento de Quimica, Universidade Federal de Ouro Preto, Ouro Preto, MG 35400-000 (Brazil); Oliveira, Luiz C.A.; Araujo, Maria Helena [Departamento de Quimica, Universidade Federal de Minas Gerais, Belo Horizonte, MG 31270-901 (Brazil); Moura, Flavia C.C., E-mail: flaviamoura@ufmg.br [Departamento de Quimica, Universidade Federal de Minas Gerais, Belo Horizonte, MG 31270-901 (Brazil)

    2012-11-30

    Highlights: Black-Right-Pointing-Pointer New magnetic molybdenum carbide composites can be prepared by CVD from ethanol. Black-Right-Pointing-Pointer Magnetic molybdenum carbide shows promising results for pollutants removal. Black-Right-Pointing-Pointer The carbide composites can be easily recovered magnetically and reused. - Abstract: New magnetic composites based on metallic nickel and molybdenum carbide, Ni/Mo{sub 2}C, have been produced via catalytic chemical vapor deposition from ethanol. Scanning electron microscopy, thermal analysis, Raman spectroscopy and X-ray diffraction studies suggest that the CVD process occurs in a single step. This process involves the reduction of NiMo oxides at different temperatures (700, 800 and 900 Degree-Sign C) with catalytic deposition of carbon from ethanol producing molybdenum carbide on Ni surface. In the absence of molybdenum the formation of Ni/C was observed. The magnetic molybdenum carbide was successfully used as pollutants removal by adsorption of sulfur and nitrogen compounds from liquid fuels and model dyes such as methylene blue and indigo carmine. The dibenzothiofene adsorption process over Ni/Mo{sub 2}C reached approximately 20 mg g{sup -1}, notably higher than other materials described in the literature and also removed almost all methylene blue dye. The great advantage of these carbide composites is that they may be easily recovered magnetically and reused.

  5. XPS, AES and friction studies of single-crystal silicon carbide

    Science.gov (United States)

    Miyoshi, K.; Buckley, D. H.

    1982-01-01

    The surface chemistry and friction behavior of a single crystal silicon carbide surface parallel to the 0001 plane in sliding contact with iron at various temperatures to 1500 C in a vacuum of 3 x 10 nPa are investigated using X-ray photoelectron and Auger electron spectroscopy. Results show that graphite and carbide-type carbon are seen primarily on the silicon carbide surface in addition to silicon at temperatures to 800 C by both types of spectroscopy. The coefficients of friction for iron sliding against a silicon carbide surface parallel to the 0001 plane surface are found to be high at temperatures up to 800 C, with the silicon and carbide-type carbon at maximum intensity in the X-ray photoelectron spectroscopy at 800 C. The concentration of the graphite increases rapidly on the surface as the temperature is increased above 800 C, while the concentrations of the carbide-type carbon and silicon decrease rapidly and this presence of graphite is accompanied by a significant decrease in friction. Preheating the surfaces to 1500 C also gives dramatically lower coefficients of friction when reheating in the sliding temperature range of from room temperature to 1200 C, with this reduction in friction due to the graphite layer on the silicon carbide surface.

  6. A new europium(III)-β-diketonate complex based on diphenylethyne as red phosphors applied in LED

    Energy Technology Data Exchange (ETDEWEB)

    Shao, Guang, E-mail: shaog@mail.sysu.edu.cn [School of Chemistry and Chemical Engineering, Sun Yat-sen University, Guangzhou 510275 (China); Zhang, Na; Lin, Duan [School of Chemistry and Chemical Engineering, Sun Yat-sen University, Guangzhou 510275 (China); Feng, Kenjun [Department of Chemical Engineering, Hui-Zhou University, Huizhou 516007 (China); Cao, Rihui, E-mail: caorihui@mail.sysu.edu.cn [School of Chemistry and Chemical Engineering, Sun Yat-sen University, Guangzhou 510275 (China); Gong, Menglian [School of Chemistry and Chemical Engineering, Sun Yat-sen University, Guangzhou 510275 (China)

    2013-06-15

    A new europium(III) ternary complex based on a fluorinated β-diketonate ligand and 1,10-phenanthroline as an ancillary ligand has been prepared and evaluated as a candidate for light-emitting diode (LED). The complex exhibits a high decomposition temperature (316 °C). Photophysical properties such as FT-IR spectra, UV–vis absorption spectra, excitation and emission spectra, luminescence decay curve and quantum yield were investigated. The excitation band is well matched with the characteristic emission of 395 nm-emitting InGaN chips. The complex exhibits an efficient energy transfer pathway from the ligands to the central Eu{sup 3+} ion via a ligand-sensitized luminescence process. An intense red-emitting LED was fabricated by coating the complex onto a 395 nm-emitting InGaN chip, and its Commission International de I'Eclairage (CIE) chromaticity coordinate (x=0.6389, y=0.3255) is close to the National Television Standard Committee (NTSC) standard value for red color. Meanwhile, the energy transfer from the InGaN chip to the complex is very efficient. All the findings demonstrate the potential application of the Eu(III) complex as red-emitting phosphors for UV-based white LEDs. -- Highlights: ► A new europium(III)-β-diketonate complex was synthesized and characterized. ► Thermal stability and photophysical properties were investigated in detail. ► PL mechanism was proposed to involve a ligand-sensitized luminescence process. ► An intense red-emitting LED was fabricated by using the complex. ► CIE chromaticity coordinate is close to NTSC standard value for red color.

  7. Mitochondria Targetable Time-Gated Luminescence Probe for Singlet Oxygen Based on a β-Diketonate-Europium Complex.

    Science.gov (United States)

    Sun, Jingyan; Song, Bo; Ye, Zhiqiang; Yuan, Jingli

    2015-12-21

    Singlet oxygen ((1)O2) plays a key role in the photodynamic therapy (PDT) technique of neoplastic diseases. In this work, by using a 9,10-dimethyl-2-anthryl-containing β-diketone, 1,1,1,2,2-pentafluoro-5-(9',10'-dimethyl-2'-anthryl)-3,5-pentanedione (Hpfdap), as a (1)O2-recognition ligand, a novel β-diketonate-europium(III) complex that can act as a luminescence probe for (1)O2, [Eu(pfdap)3(tpy)] (tpy = 2,2',2″-terpyridine), has been designed and synthesized for the time-gated luminescence detection of (1)O2 in living cells. The complex is weakly luminescent due to the quenching effect of 9,10-dimethyl-2-anthryl groups. After reaction with (1)O2, accompanied by the formation of endoperoxides of 9,10-dimethyl-2-anthryl groups, the luminescence quenching disappears, so that the long-lived luminescence of the europium(III) complex is switched on. The complex showed highly selective luminescence response to (1)O2 with a remarkable luminescence enhancement. Combined with the time-gated luminescence imaging technique, the complex was successfully used as a luminescent probe for the monitoring of the time-dependent generation of (1)O2 in 5-aminolevulinic acid (a PDT drug) loaded HepG2 cells during the photodynamic process. In addition, by coloading the complex and a mitochondrial indicator, Mito-Tracker Green, into HepG2 cells, the specific localization of [Eu(pfdap)3(tpy)] molecules in mitochondria of HepG2 cells was demonstrated by confocal fluorescence imaging measurements.

  8. Fabrication and characterization of carbon and boron carbide nanostructured materials

    Science.gov (United States)

    Reynaud, Sara

    Carbon is present in nature in a variety of allotropes and chemical compounds. Due to reduced dimensionality, nanostructured carbon materials, i.e. single walled carbon nanotubes (SWNTs), are characterized by unique physical and chemical properties. There is a potential for SWNTs use as biological probes and assists for tunable tissue growth in biomedical applications. However, the presumed cytotoxicity of SWNTs requires investigation of the risks of their incorporation into living systems. Boron is not found in nature in elementary form. Boron based materials are chemically complex and exist in various polymorphic forms, i.e. boron carbide (BC). Because BC is a lightweight material with exceptional mechanical and elastic properties, it is the ideal candidate for armor and ballistic applications. However, practical use of BC as armor material is limited because of its anomalous glass-like behaviour at high velocity impacts, which has been linked to stress-induced structural instability in one of BC polymorphs, B12(CCC). Theoretical calculations suggest that formation of B12(CCC) in BC could be suppressed by silicon doping. In the first part of this thesis, biocompatibility of SWNTs is investigated. It is shown that under normal cell implantation conditions, the electrical conductivity of the SWNTs decreases due to an increase in structural disorder. This research suggests that SWNTs can be functionalized by protein and biological cells reducing the risk of cytotoxicity. In the second part of this thesis, boron carbide nanostructured materials are synthesized and investigated. Radio frequency sputtering deposition technique is employed for fabrication of BC (Si free) and BC:Si thin films. Variation of plasma conditions and temperature are found to affect chemical composition, adhesion to the substrate and morphology of the films. It is shown that BC films are predominantly amorphous and a small addition of Si largely improves their mechanical properties. In addition

  9. Rapid Fabrication of Carbide Matrix/Carbon Fiber Composites

    Science.gov (United States)

    Williams, Brian E.; Bernander, Robert E.

    2007-01-01

    Composites of zirconium carbide matrix material reinforced with carbon fibers can be fabricated relatively rapidly in a process that includes a melt infiltration step. Heretofore, these and other ceramic matrix composites have been made in a chemical vapor infiltration (CVI) process that takes months. The finished products of the CVI process are highly porous and cannot withstand temperatures above 3,000 F (approx.1,600 C). In contrast, the melt-infiltration-based process takes only a few days, and the composite products are more nearly fully dense and have withstood temperatures as high as 4,350 F (approx.2,400 C) in a highly oxidizing thrust chamber environment. Moreover, because the melt- infiltration-based process takes much less time, the finished products are expected to cost much less. Fabrication begins with the preparation of a carbon fiber preform that, typically, is of the size and shape of a part to be fabricated. By use of low-temperature ultraviolet-enhanced chemical vapor deposition, the carbon fibers in the preform are coated with one or more interfacial material(s), which could include oxides. The interfacial material helps to protect the fibers against chemical attack during the remainder of the fabrication process and against oxidation during subsequent use; it also enables slippage between the fibers and the matrix material, thereby helping to deflect cracks and distribute loads. Once the fibers have been coated with the interfacial material, the fiber preform is further infiltrated with a controlled amount of additional carbon, which serves as a reactant for the formation of the carbide matrix material. The next step is melt infiltration. The preform is exposed to molten zirconium, which wicks into the preform, drawn by capillary action. The molten metal fills most of the interstices of the preform and reacts with the added carbon to form the zirconium carbide matrix material. The zirconium does not react with the underlying fibers because they

  10. Characterization of silicon carbide and diamond detectors for neutron applications

    Science.gov (United States)

    Hodgson, M.; Lohstroh, A.; Sellin, P.; Thomas, D.

    2017-10-01

    The presence of carbon atoms in silicon carbide and diamond makes these materials ideal candidates for direct fast neutron detectors. Furthermore the low atomic number, strong covalent bonds, high displacement energies, wide bandgap and low intrinsic carrier concentrations make these semiconductor detectors potentially suitable for applications where rugged, high-temperature, low-gamma-sensitivity detectors are required, such as active interrogation, electronic personal neutron dosimetry and harsh environment detectors. A thorough direct performance comparison of the detection capabilities of semi-insulating silicon carbide (SiC-SI), single crystal diamond (D-SC), polycrystalline diamond (D-PC) and a self-biased epitaxial silicon carbide (SiC-EP) detector has been conducted and benchmarked against a commercial silicon PIN (Si-PIN) diode, in a wide range of alpha (Am-241), beta (Sr/Y-90), ionizing photon (65 keV to 1332 keV) and neutron radiation fields (including 1.2 MeV to 16.5 MeV mono-energetic neutrons, as well as neutrons from AmBe and Cf-252 sources). All detectors were shown to be able to directly detect and distinguish both the different radiation types and energies by using a simple energy threshold discrimination method. The SiC devices demonstrated the best neutron energy discrimination ratio (E\\max (n=5 MeV)/E\\max (n=1 MeV)  ≈5), whereas a superior neutron/photon cross-sensitivity ratio was observed in the D-PC detector (E\\max (AmBe)/E\\max (Co-60)  ≈16). Further work also demonstrated that the cross-sensitivity ratios can be improved through use of a simple proton-recoil conversion layer. Stability issues were also observed in the D-SC, D-PC and SiC-SI detectors while under irradiation, namely a change of energy peak position and/or count rate with time (often referred to as the polarization effect). This phenomenon within the detectors was non-debilitating over the time period tested (> 5 h) and, as such, stable operation was

  11. Handbook of refractory carbides and nitrides properties, characteristics, processing and applications

    CERN Document Server

    Pierson, Hugh O

    1996-01-01

    Refractory carbides and nitrides are useful materials with numerous industrial applications and a promising future, in addition to being materials of great interest to the scientific community. Although most of their applications are recent, the refractory carbides and nitrides have been known for over one hundred years. The industrial importance of the refractory carbides and nitrides is growing rapidly, not only in the traditional and well-established applications based on the strength and refractory nature of these materials such as cutting tools and abrasives, but also in new and promising fields such as electronics and optoelectronics.

  12. Synthesis and characterization of transition metal carbides and their catalytic applications

    Science.gov (United States)

    Wan, Cheng

    Transition metal (both monometallic and bimetallic) carbides have been synthesized by an amine-metal oxide composite (AMOC) method. The composite reduces the diffusion distances among each element and allows the formation of carbides to take place as low as 610°C, which is significantly lower than traditional carbide synthesis methods (above 1500°C). Additionally, amines act not only as carbon sources and reducing agents, but also morphological templates which helps to make uniform transition metal carbide (TMC) nanocrystals with various shapes. Beyond morphology control, AMOC method can also help to synthesize multiple phases of monometallic carbides, which includes four phases of molybdenum carbides (alpha-MoC1-x, beta-Mo2C, eta-MoC, and gamma-MoC), two phases of tungsten carbides (W2C and WC), and three phases of chromium carbides (Cr3C2-x, Cr7C3, and Cr3C2). Molybdenum carbide has been proposed as a possible alternative to platinum for catalyzing the hydrogen evolution reaction (HER). Previous studies were limited to only one phase, which is beta-Mo2C with an Fe 2N structure. Here, four molybdenum carbide materials including gamma-MoC with a WC type structure which was stabilized for the first time as a phase pure nanomaterial. Moreover, a wide range of magnetic iron-doped molybdenum carbide (Mo2-xFexC) nanomaterials were also synthesized, which exhibits a better HER activity to non-doped beta-Mo2C. A group of (CrxFe1-x)7C3 (0.2nanomaterials via AMOC method, which demonstrate excellent catalytic activities for both oxygen evolution reaction (OER) and oxygen reduction reaction (ORR). Other carbides/nitrides made from AMOCs include WN1-x, Fe3C, Fe3-xN, Fe3Mo3C, N 2Mo3C, Ni3Mo3C, Ni6Mo 6C, and Mo0.5W0.5C.

  13. Synthesis and characterization of metal carbides nanoparticles produced by electrical explosion of wires.

    Science.gov (United States)

    Ilyin, Alexander P; Nazarenko, Olga B; Tikhonov, Dmitriy V

    2012-10-01

    Tungsten, titanium, tantalum, aluminum carbides nanoparticles were produced by electrical explosion of wires. The explosions were carried out in gaseous mixtures of argon and acetylene at different ratios, argon and propane, and in liquids such as benzene, toluene, decane. The effects of the synthesis conditions on the size and phase composition of metal carbide nanoparticles were investigated. The thermal activity of the prepared powders was studied by the method of differential thermal analysis at the heating in air. Thermodynamic analysis of carbides formation during the process of electrical explosion has been made. The output of the chemical compounds depends on their thermal stability: the more thermally stable they are, the higher their output.

  14. Effect of boron carbide on primary crystallization of chromium cast iron

    Directory of Open Access Journals (Sweden)

    A. Studnicki

    2008-04-01

    Full Text Available In the paper results of the influence of boron carbide (B4C as inoculant of abrasion-resisting chromium cast iron (about 2,8% carbon and 18% chromium on primary crystallization researches are presented. Boron carbide dispersion was introduced at the bottom of pouring ladle before tap of liquid cast iron. In this investigations were used three different quantities of inoculant in amounts 0,1%; 0,2% and 0,3% with relation to bath weight. It has been demonstrated that such small additions of boron carbide change primary crystallization parameters, particularly temperature characteristic of process, their time and kinetics.

  15. Steel-bonded carbides for high reliability wear parts in aerospace

    Energy Technology Data Exchange (ETDEWEB)

    Mandalis, P.; Tarkan, S.E.; Kumar Mal, M.

    1975-01-01

    Properties and uses of Ferro-Tic cemented carbides are discussed. It is noted that owing to the unique combination of desirable mechanical properties, high strength, ability to resist corrosion by some of the most aggressive chemical environments, good oxidation resistance, wear resistance, and favorable strength-to-weight ratio, the steel-bonded carbides are increasingly being used for many severe-environment applications in the aerospace industries, but there is still a great untapped potential. Material engineers and designers are urged to consider steel/alloy bonded machinable and hardenable carbides for their more difficult wear applications. (JRD)

  16. Excitation energy transfer in europium chelate with doxycycline in the presence of a second ligand in micellar solutions of nonionic surfactants

    Science.gov (United States)

    Smirnova, T. D.; Shtykov, S. N.; Kochubei, V. I.; Khryachkova, E. S.

    2011-01-01

    The complexation of Eu3+ with doxycycline (DC) antibiotic in the presence of several second ligands and surfactant micelles of different types is studied by the spectrophotometric and luminescence methods. It is found that the efficiency of excitation energy transfer in Eu3+-DC chelate depends on the nature of the second ligand and surfactant micelles. Using thenoyltrifluoroacetone (TTA) as an example, it is shown that the second ligand additionally sensitizes the europium fluorescence, and the possibility of intermediate sensitization of DC and then of europium is shown by the example of 1,10-phenanthroline. In all cases, the excitation energy transfer efficiency was increased due to the so-called antenna effect. The decay kinetics of the sensitized fluorescence of the binary and mixed-ligand chelates in aqueous and micellar solutions of nonionic surfactants is studied and the relative quantum yields and lifetimes of fluorescence are determined.

  17. A Smart Europium-Ruthenium Complex as Anticancer Prodrug: Controllable Drug Release and Real-Time Monitoring under Different Light Excitations.

    Science.gov (United States)

    Li, Hongguang; Xie, Chen; Lan, Rongfeng; Zha, Shuai; Chan, Chi-Fai; Wong, Wing-Yan; Ho, Ka-Lok; Chan, Brandon Dow; Luo, Yuxia; Zhang, Jing-Xiang; Law, Ga-Lai; Tai, William C S; Bünzli, Jean-Claude G; Wong, Ka-Leung

    2017-11-09

    A unique, dual-function, photoactivatable anticancer prodrug, RuEuL, has been tailored that features a ruthenium(II) complex linked to a cyclen-europium chelate via a π-conjugated bridge. Under irradiation at 488 nm, the dark-inactive prodrug undergoes photodissociation, releasing the DNA-damaging ruthenium species. Under evaluation-window irradiation (λirr = one-photon 350 nm or two-photon 700 nm), the drug delivery process can be quantitatively monitored in real-time because of the long-lived red europium emission. Linear relationships between released drug concentration and ESI-MS or luminescence responses are established. Finally, the efficiency of the new prodrug is demonstrated both in vitro RuEuL anticancer prodrug over some existing ones and open the way for decisive improvements in multipurpose prodrugs.

  18. Method of producing novel silicon carbide articles. [Patent application

    Science.gov (United States)

    Milewski, J.V.

    1982-06-18

    A method of producing articles comprising reaction-bonded silicon carbide (SiC) and graphite (and/or carbon) is given. The process converts the graphite (and/or carbon) in situ to SiC, thus providing the capability of economically obtaining articles made up wholly or partially of SiC having any size and shape in which graphite (and/or carbon) can be found or made. When the produced articles are made of an inner graphite (and/or carbon) substrate to which SiC is reaction bonded, these articles distinguish SiC-coated graphite articles found in the prior art by the feature of a strong bond having a gradual (as opposed to a sharply defined) interface which extends over a distance of mils. A method for forming SiC whisker-reinforced ceramic matrices is also given. The whisker-reinforced articles comprise SiC whiskers which substantially retain their structural integrity.

  19. ELABORATION OF AN EPOXY COATING REINFORCED WITH ZIRCONIUM CARBIDE NANOSTRUCTURES

    Directory of Open Access Journals (Sweden)

    Lucia G. Díaz-Barriga

    2013-12-01

    Full Text Available This work shows the preparation of a transparent epoxy coating reinforced with 200 PPM of zirconium carbide nanostructures. The nanostructures of ZrC were prepared by mechanosynthesis. The additive characteristics analyzed by X-ray diffraction (XRD and scanning electron microscopy (SEM were presented. Epoxy coating adhesion on a steel plate was analyzed using MEB. Thermogravimetric analysis (TGA was performed to the reinforced paints between 20-700 °C. The reinforced enamel was compared with an enamel without nanostructures. There is not vaporization of reinforced enamel at a 95 y 100 °C with ZrC particles size of 10 µm y 120 nm respectively. The final enamel degradation is slower when there is a 14% by weight of the residue and 426 °C with 120nm diameter particles.

  20. Microstructural optimization of solid-state sintered silicon carbide

    Science.gov (United States)

    Vargas-Gonzalez, Lionel R.

    Silicon carbide armor, manufactured through solid-state sintering, liquid-phase sintering, and hot-pressing, is being used by the United States Armed Forces for personal and vehicle protection. There is a lack of consensus, however, on which process results in the best-performing ballistic armor. Previous studies have shown that hot-pressed ceramics processed with secondary oxide and/or rare earth oxides, which exhibit high fracture toughness, perform well in handling and under ballistic impact. This high toughness is due to the intergranular nature of the fracture, creating a tortuous path for cracks and facilitating crack deflection and bridging. However, it has also been shown that higher-hardness sintered SiC materials might perform similarly or better to hot-pressed armor, in spite of the large fracture toughness deficit, if the microstructure (density, grain size, purity) of these materials are improved. In this work, the development of theoretically-dense, clean grain boundary, high hardness solid-state sintered silicon carbide (SiC) armor was pursued. Boron carbide and graphite (added as phenolic resin to ensure the carbon is finely dispersed throughout the microstructure) were used as the sintering aids. SiC batches between 0.25--4.00 wt.% carbon were mixed and spray dried. Cylindrical pellets were pressed at 13.7 MPa, cold-isostatically pressed (CIP) at 344 MPa, sintered under varying sintering soaking temperatures and heating rates, and varying post hot-isostatic pressing (HIP) parameters. Carbon additive amounts between 2.0--2.5 wt.% (based on the resin source), a 0.36 wt.% B4C addition, and a 2050°C sintering soak yielded parts with high sintering densities (˜95.5--96.5%) and a fine, equiaxed microstructure (d50 = 2.525 mum). A slow ramp rate (10°C/min) prevented any occurrence of abnormal grain growth. Post-HIPing at 1900°C removed the remaining closed porosity to yield a theoretically-dense part (3.175 g/cm3, according to rule of mixtures). These

  1. Linear integrated optics in 3C silicon carbide.

    Science.gov (United States)

    Martini, Francesco; Politi, Alberto

    2017-05-15

    The development of new photonic materials that combine diverse optical capabilities is needed to boost the integration of different quantum and classical components within the same chip. Amongst all candidates, the superior optical properties of cubic silicon carbide (3C SiC) could be merged with its crystalline point defects, enabling single photon generation, manipulation and light-matter interaction on a single device. The development of photonics devices in SiC has been limited by the presence of the silicon substrate, over which thin crystalline films are heteroepitaxially grown. By employing a novel approach in the material fabrication, we demonstrate grating couplers with coupling efficiency reaching -6 dB, sub-µm waveguides and high intrinsic quality factor (up to 24,000) ring resonators. These components are the basis for linear optical networks and essential for developing a wide range of photonics component for non-linear and quantum optics.

  2. Body of Knowledge for Silicon Carbide Power Electronics

    Science.gov (United States)

    Boomer, Kristen; Lauenstein, Jean-Marie; Hammoud, Ahmad

    2016-01-01

    Wide band gap semiconductors, such as silicon carbide (SiC), have emerged as very promising materials for future electronic components due to the tremendous advantages they offer in terms of power capability, extreme temperature tolerance, and high frequency operation. This report documents some issues pertaining to SiC technology and its application in the area of power electronics, in particular those geared for space missions. It also serves as a body of knowledge (BOK) in reference to the development and status of this technology obtained via literature and industry survey as well as providing a listing of the major manufacturers and their capabilities. Finally, issues relevant to the reliability of SiC-based electronic parts are addressed and limitations affecting the full utilization of this technology are identified.

  3. Mode Grüneisen parameters of boron carbide

    Science.gov (United States)

    Werheit, Helmut; Manghnani, Murli H.; Kuhlmann, Udo; Hushur, Anwar; Shalamberidze, Sulkhan

    2017-10-01

    IR- and Raman-active phonons of boron carbide and the mode Grüneisen parameters γ related are studied concerning their dependence on chemical composition, temperatures between 30 and 800 K and pressures up to ∼70 GPa. Most bulk phonons yield γ between +1.5 and - 1.5: those related to icosahedra yield γ = 0.8(3). Surface phonons are distinguished by considerably higher γ. Negative γ of chain bending modes supports the assumption that the chain center buckles out under pressure. Some striking specific mode Grüneisen parameters are explained. Pressure-dependent bond lengths suggest the reversible high-pressure phase transition to be second order.

  4. Hydrothermal corrosion of silicon carbide joints without radiation

    Science.gov (United States)

    Koyanagi, Takaaki; Katoh, Yutai; Terrani, Kurt A.; Kim, Young-Jin; Kiggans, James O.; Hinoki, Tatsuya

    2016-12-01

    Hydrothermal corrosion of four types of the silicon carbide (SiC) to SiC plate joints were investigated under pressurized water reactor and boiling water reactor relevant chemical conditions without irradiation. The joints were formed by metal diffusion bonding using molybdenum or titanium interlayer, reaction sintering using Ti-Si-C system, and SiC nanopowder sintering. Most of the joints withstood the corrosion tests for five weeks. The recession of the SiC substrates was limited. Based on the recession of the bonding layers, it was concluded that all the joints except for the molybdenum diffusion bond are promising under the reducing environments without radiation. The SiC nanopowder sintered joint was the most corrosion tolerant under the oxidizing environment among the four joints.

  5. New method for synthesis of metal carbides, nitrides and carbonitrides

    Energy Technology Data Exchange (ETDEWEB)

    Koc, R.; Folmer, J.S.; Kodambaka, S.K. [Southern Illinois Univ., Carbondale, IL (United States)] [and others

    1997-04-01

    The purpose of this work is to develop a novel synthesis method using a carbothermic reduction reaction of carbon coated precursors for producing high purity, submicron, non-agglomerated powders of metal carbide, metal nitride and metal boride systems. The authors also want to demonstrate the advantages of the process and provide information on the applicability of the process for synthesizing related advanced ceramic powders (e.g. SiC, WC, TiN, TiB{sub 2}, Si{sub 3}N{sub 4}). During the FY96 of the project, steps are taken to investigate the reaction mechanisms and phase evolution during the formation of TiC from carbon coated titania precursors and to produce submicron TiC powders with desired stoichiometries. Depending on the carbon content in the coated titania precursor, TiC powder was produced with different stoichiometries (different amount of oxygen and free carbon).

  6. Spin-photon entanglement interfaces in silicon carbide defect centers

    Science.gov (United States)

    Economou, Sophia E.; Dev, Pratibha

    2016-12-01

    Optically active spins in solid-state systems can be engineered to emit photons that are entangled with the spin in the solid. This allows for applications such as quantum communications, quantum key distribution, and distributed quantum computing. Recently, there has been a strong interest in silicon carbide defects, as they emit very close to the telecommunication wavelength, making them excellent candidates for long range quantum communications. In this work we develop explicit schemes for spin-photon entanglement in several SiC defects: the silicon monovacancy, the silicon divacancy, and the NV center in SiC. Distinct approaches are given for (i) single-photon and spin entanglement and (ii) the generation of long strings of entangled photons. The latter are known as cluster states and comprise a resource for measurement-based quantum information processing.

  7. Superconductivity in heavily boron-doped silicon carbide

    Directory of Open Access Journals (Sweden)

    Markus Kriener, Takahiro Muranaka, Junya Kato, Zhi-An Ren, Jun Akimitsu and Yoshiteru Maeno

    2008-01-01

    Full Text Available The discoveries of superconductivity in heavily boron-doped diamond in 2004 and silicon in 2006 have renewed the interest in the superconducting state of semiconductors. Charge-carrier doping of wide-gap semiconductors leads to a metallic phase from which upon further doping superconductivity can emerge. Recently, we discovered superconductivity in a closely related system: heavily boron-doped silicon carbide. The sample used for that study consisted of cubic and hexagonal SiC phase fractions and hence this led to the question which of them participated in the superconductivity. Here we studied a hexagonal SiC sample, free from cubic SiC phase by means of x-ray diffraction, resistivity, and ac susceptibility.

  8. Dissimilar Brazed Joints Between Steel and Tungsten Carbide

    Science.gov (United States)

    Voiculescu, I.; Geanta, V.; Binchiciu, H.; Iovanas, D.; Stefanoiu, R.

    2017-06-01

    Brazing is a joining process used to obtain heterogeneous assemblies between different materials, such as steels, irons, non-ferrous metals, ceramics etc. Some application, like asphalt cutters, require quick solutions to obtain dissimilar joints at acceptable costs, given the very short period of operation of these parts. This paper presents some results obtained during the brazing of dissimilar joints between steel and tungsten carbide by using different types of Ag-Cu system filler materials alloyed with P and Sn. The brazing techniques used were oxygen-gas flame and induction joining. The brazing behaviour was analysed in cross sections by optical and electron microscopy. The metallographic analysis enhanced the adhesion features and the length of penetration in the joining gap. The melting range of the filler materials was measured using thermal analysis.

  9. First-principles study of point defects in thorium carbide

    Energy Technology Data Exchange (ETDEWEB)

    Pérez Daroca, D., E-mail: pdaroca@tandar.cnea.gov.ar [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica, Av. General Paz 1499, (1650) San Martin, Buenos Aires (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas, (1033) Buenos Aires (Argentina); Jaroszewicz, S. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica, Av. General Paz 1499, (1650) San Martin, Buenos Aires (Argentina); Instituto de Tecnología Jorge A. Sabato, UNSAM-CNEA, Av. General Paz 1499, (1650) San Martin, Buenos Aires (Argentina); Llois, A.M. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica, Av. General Paz 1499, (1650) San Martin, Buenos Aires (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas, (1033) Buenos Aires (Argentina); Mosca, H.O. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica, Av. General Paz 1499, (1650) San Martin, Buenos Aires (Argentina); Instituto de Tecnología Jorge A. Sabato, UNSAM-CNEA, Av. General Paz 1499, (1650) San Martin, Buenos Aires (Argentina)

    2014-11-15

    Thorium-based materials are currently being investigated in relation with their potential utilization in Generation-IV reactors as nuclear fuels. One of the most important issues to be studied is their behavior under irradiation. A first approach to this goal is the study of point defects. By means of first-principles calculations within the framework of density functional theory, we study the stability and formation energies of vacancies, interstitials and Frenkel pairs in thorium carbide. We find that C isolated vacancies are the most likely defects, while C interstitials are energetically favored as compared to Th ones. These kind of results for ThC, to the best authors’ knowledge, have not been obtained previously, neither experimentally, nor theoretically. For this reason, we compare with results on other compounds with the same NaCl-type structure.

  10. Diffusion in thorium carbide: A first-principles study

    Energy Technology Data Exchange (ETDEWEB)

    Pérez Daroca, D., E-mail: pdaroca@tandar.cnea.gov.ar [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica, Av. General Paz 1499, 1650, San Martín, Buenos Aires (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas, 1025, Buenos Aires (Argentina); Llois, A.M. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica, Av. General Paz 1499, 1650, San Martín, Buenos Aires (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas, 1025, Buenos Aires (Argentina); Mosca, H.O. [Gerencia de Investigación y Aplicaciones, Comisión Nacional de Energía Atómica, Av. General Paz 1499, 1650, San Martín, Buenos Aires (Argentina); Instituto de Tecnología Jorge A. Sabato, UNSAM–CNEA, Av. General Paz 1499, 1650, San Martín, Buenos Aires (Argentina)

    2015-12-15

    The prediction of the behavior of Th compounds under irradiation is an important issue for the upcoming Generation-IV nuclear reactors. The study of self-diffusion and hetero-diffusion is a central key to fulfill this goal. As a first approach, we obtained, by means of first-principles methods, migration and activation energies of Th and C atoms self-diffusion and diffusion of He atoms in ThC. We also calculate diffusion coefficients as a function of temperature. - Highlights: • Diffusion in thorium carbide by means of first-principles calculations is studied. • The most favorable migration event is a C atom moving through a C-vacancy aided path. • Calculated C atoms diffusion coefficients agree very well with the experimental data. • For He, the energetically most favorable migration path is through Th-vacancies.

  11. Silicon carbide: a versatile material for biosensor applications.

    Science.gov (United States)

    Oliveros, Alexandra; Guiseppi-Elie, Anthony; Saddow, Stephen E

    2013-04-01

    Silicon carbide (SiC) has been around for more than 100 years as an industrial material and has found wide and varied applications because of its unique electrical and thermal properties. In recent years there has been increased attention to SiC as a viable material for biomedical applications. Of particular interest in this review is its potential for application as a biotransducer in biosensors. Among these applications are those where SiC is used as a substrate material, taking advantage of its surface chemical, tribological and electrical properties. In addition, its potential for integration as system on a chip and those applications where SiC is used as an active material make it a suitable substrate for micro-device fabrication. This review highlights the critical properties of SiC for application as a biosensor and reviews recent work reported on using SiC as an active or passive material in biotransducers and biosensors.

  12. Chapter 19: Catalysis by Metal Carbides and Nitrides

    Energy Technology Data Exchange (ETDEWEB)

    Schaidle, Joshua A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Nash, Connor P [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Yung, Matthew M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chen, Yuan [Pacific Northwest National Laboratory; Carl, Sarah [University of Michigan; Thompson, Levi [University of Michigan

    2017-08-09

    Early transition metal carbides and nitrides (ETMCNs), materials in which carbon or nitrogen occupies interstitial sites within a parent metal lattice, possess unique physical and chemical properties that motivate their use as catalysts. Specifically, these materials possess multiple types of catalytic sites, including metallic, acidic, and basic sites, and as such, exhibit reactivities that differ from their parent metals. Moreover, their surfaces are dynamic under reaction conditions. This chapter reviews recent (since 2010) experimental and computational investigations into the catalytic properties of ETMCN materials for applications including biomass conversion, syngas and CO2 upgrading, petroleum and natural gas refining, and electrocatalytic energy conversion, energy storage, and chemicals production, and attempts to link catalyst performance to active site identity/surface structure in order to elucidate the present level of understanding of structure-function relationships for these materials. The chapter concludes with a perspective on leveraging the unique properties of these materials to design and develop improved catalysts through a dedicated, multidisciplinary effort.

  13. High surface area silicon carbide-coated carbon aerogel

    Science.gov (United States)

    Worsley, Marcus A; Kuntz, Joshua D; Baumann, Theodore F; Satcher, Jr, Joe H

    2014-01-14

    A metal oxide-carbon composite includes a carbon aerogel with an oxide overcoat. The metal oxide-carbon composite is made by providing a carbon aerogel, immersing the carbon aerogel in a metal oxide sol under a vacuum, raising the carbon aerogel with the metal oxide sol to atmospheric pressure, curing the carbon aerogel with the metal oxide sol at room temperature, and drying the carbon aerogel with the metal oxide sol to produce the metal oxide-carbon composite. The step of providing a carbon aerogel can provide an activated carbon aerogel or provide a carbon aerogel with carbon nanotubes that make the carbon aerogel mechanically robust. Carbon aerogels can be coated with sol-gel silica and the silica can be converted to silicone carbide, improved the thermal stability of the carbon aerogel.

  14. Deposition of tantalum carbide coatings on graphite by laser interactions

    Science.gov (United States)

    Veligdan, James; Branch, D.; Vanier, P. E.; Barietta, R. E.

    1994-01-01

    Graphite surfaces can be hardened and protected from erosion by hydrogen at high temperatures by refractory metal carbide coatings, which are usually prepared by chemical vapor deposition (CVD) or chemical vapor reaction (CVR) methods. These techniques rely on heating the substrate to a temperature where a volatile metal halide decomposes and reacts with either a hydrocarbon gas or with carbon from the substrate. For CVR techniques, deposition temperatures must be in excess of 2000 C in order to achieve favorable deposition kinetics. In an effort to lower the bulk substrate deposition temperature, the use of laser interactions with both the substrate and the metal halide deposition gas has been employed. Initial testing involved the use of a CO2 laser to heat the surface of a graphite substrate and a KrF excimer laser to accomplish a photodecomposition of TaCl5 gas near the substrate. The results of preliminary experiments using these techniques are described.

  15. Cryogenic Treatment of Carbide-free Bainite Steel After Carburizing

    Directory of Open Access Journals (Sweden)

    SUN Shi-qing

    2017-05-01

    Full Text Available The cryogenic treatment (CT process of carbide-free bainite steel after carburizing was optimized by the method combining thermal magnetic analysis, microhardness analysis and direct reading spectrometric analysis. The results show that cryogenic treatment temperature of the hardened layer should be lower than 134K by measuring thermal magnetic curve of the sample after carburizing at 1193K and air cooling (AC. After cryogenic treatment at 123K and tempering (T at 463K, retained austenite content of the hardened layer is about 12.2% (mass fraction. The near surface layer of carburized steel is hardened dramatically through the cryogenic treatment, and the hardness of near surface layer reaches about 810HV1.0 after low temperature tempering. The distribution of hardness gradient of carburized steel tends to be reasonable.

  16. Methods and systems for utilizing carbide lime or slag

    Energy Technology Data Exchange (ETDEWEB)

    Devenney, Martin; Fernandez, Miguel; Chen, Irvin; Calas, Guillaume; Weiss, Michael Joseph; Tester, Chantel Cabrera

    2018-02-27

    Provided herein are methods comprising a) treating a slag solid or carbide lime suspension with an ammonium salt in water to produce an aqueous solution comprising calcium salt, ammonium salt, and solids; b) contacting the aqueous solution with carbon dioxide from an industrial process under one or more precipitation conditions to produce a precipitation material comprising calcium carbonate and a supernatant aqueous solution wherein the precipitation material and the supernatant aqueous solution comprise residual ammonium salt; and c) removing and optionally recovering ammonia and/or ammonium salt using one or more steps of (i) recovering a gas exhaust stream comprising ammonia during the treating and/or the contacting step; (ii) recovering the residual ammonium salt from the supernatant aqueous solution; and (iii) removing and optionally recovering the residual ammonium salt from the precipitation material.

  17. Directional amorphization of boron carbide subjected to laser shock compression

    Science.gov (United States)

    Zhao, Shiteng; Kad, Bimal; Remington, Bruce A.; LaSalvia, Jerry C.; Wehrenberg, Christopher E.; Behler, Kristopher D.; Meyers, Marc A.

    2016-10-01

    Solid-state shock-wave propagation is strongly nonequilibrium in nature and hence rate dependent. Using high-power pulsed-laser-driven shock compression, unprecedented high strain rates can be achieved; here we report the directional amorphization in boron carbide polycrystals. At a shock pressure of 45˜50 GPa, multiple planar faults, slightly deviated from maximum shear direction, occur a few hundred nanometers below the shock surface. High-resolution transmission electron microscopy reveals that these planar faults are precursors of directional amorphization. It is proposed that the shear stresses cause the amorphization and that pressure assists the process by ensuring the integrity of the specimen. Thermal energy conversion calculations including heat transfer suggest that amorphization is a solid-state process. Such a phenomenon has significant effect on the ballistic performance of B4C.

  18. Nanoporous Carbide-Derived Carbon Material-Based Linear Actuators

    Directory of Open Access Journals (Sweden)

    Janno Torop

    2009-12-01

    Full Text Available Devices using electroactive polymer-supported carbon material can be exploited as alternatives to conventional electromechanical actuators in applications where electromechanical actuators have some serious deficiencies. One of the numerous examples is precise microactuators. In this paper, we show for first time the dilatometric effect in nanocomposite material actuators containing carbide-derived carbon (CDC and polytetrafluoroetylene polymer (PTFE. Transducers based on high surface area carbide-derived carbon electrode materials are suitable for short range displacement applications, because of the proportional actuation response to the charge inserted, and high Coulombic efficiency due to the EDL capacitance. The material is capable of developing stresses in the range of tens of N cm-2. The area of an actuator can be dozens of cm2, which means that forces above 100 N are achievable. The actuation mechanism is based on the interactions between the high-surface carbon and the ions of the electrolyte. Electrochemical evaluations of the four different actuators with linear (longitudinal action response are described. The actuator electrodes were made from two types of nanoporous TiC-derived carbons with surface area (SA of 1150 m2 g-1 and 1470 m2 g-1, respectively. Two kinds of electrolytes were used in actuators: 1.0 M tetraethylammonium tetrafluoroborate (TEABF4 solution in propylene carbonate and pure ionic liquid 1-ethyl-3-methylimidazolium trifluoromethanesulfonate (EMITf. It was found that CDC based actuators exhibit a linear movement of about 1% in the voltage range of 0.8 V to 3.0 V at DC. The actuators with EMITf electrolyte had about 70% larger movement compared to the specimen with TEABF4 electrolyte.

  19. Structural and optical analysis on europium doped AZrO{sub 3} (A=Ba, Ca, Sr) phosphor for display devices application

    Energy Technology Data Exchange (ETDEWEB)

    Dubey, Vikas, E-mail: jsvikasdubey@gmail.com [Department of Physics, Bhilai Institute of Technology Raipur, 493661 (India); Tiwari, Neha [Department of Physics, Govt. Model Science College, Jabalpur (India)

    2016-05-06

    Behavior displayed by europium doped AZrO{sub 3} phosphor which was synthesized by solid state reaction method. For synthesis of BaZrO{sub 3}, SrZrO{sub 3} and CaZrO{sub 3} phosphor with fixed concentration of europium ion was calcination at 1000°C and sintered at 1300°C following intermediate grinding. Synthesized sample was characterized by X-ray diffraction analysis and crystallite sized was calculated by Scherer’s formula. From PL spectra of prepared phosphors shows intense emission centred at 612nm (red emission) with high intensity for SrZrO{sub 3}:Eu{sup 3+}. For europium doped BaZrO{sub 3} and CaZrO{sub 3} (613nm) phosphor shows less intense PL spectra as compared to SrZrO{sub 3}:Eu{sup 3+}. The strong emission peak of AZrO{sub 3}:Eu{sup 3+} phosphor is due to forced electric dipole transition of {sup 5}D{sub 0} to {sup 7}F{sub 2} centered at 612 and 613nm. It is characteristic red emission for europium ion. The excitation spectra of AZrO{sub 3}:Eu{sup 3+} phosphor mainly consists of the charge transfer and (CTB) of Eu{sup 3+} located in 200–350 nm centred at 254nm. The present phosphors can act as single host for red light emission in display devices. The CIE coordinates were calculated by Spectrophotometric method using the spectral energy distribution of the AZrO{sub 3}:Eu{sup 3+} sample.

  20. Metal-organic framework luminescence in the yellow gap by codoping of the homoleptic imidazolate ∞(3)[Ba(Im)2] with divalent europium.

    Science.gov (United States)

    Rybak, Jens-Christoph; Hailmann, Michael; Matthes, Philipp R; Zurawski, Alexander; Nitsch, Jörn; Steffen, Andreas; Heck, Joachim G; Feldmann, Claus; Götzendörfer, Stefan; Meinhardt, Jürgen; Sextl, Gerhard; Kohlmann, Holger; Sedlmaier, Stefan J; Schnick, Wolfgang; Müller-Buschbaum, Klaus

    2013-05-08

    The rare case of a metal-triggered broad-band yellow emitter among inorganic-organic hybrid materials was achieved by in situ codoping of the novel imidazolate metal-organic framework ∞(3)[Ba(Im)2] with divalent europium. The emission maximum of this dense framework is in the center of the yellow gap of primary light-emitting diode phosphors. Up to 20% Eu2+ can be added to replace Ba2+ as connectivity centers without causing observable phase segregation. High-resolution energy-dispersive X-ray spectroscopy showed that incorporation of even 30% Eu2+ is possible on an atomic level, with 2-10% Eu2+ giving the peak quantum efficiency (QE = 0.32). The yellow emission can be triggered by two processes: direct excitation of Eu2+ and an antenna effect of the imidazolate linkers. The emission is fully europium-centered, involving 5d → 4f transitions, and depends on the imidazolate surroundings of the metal ions. The framework can be obtained by a solvent-free in situ approach starting from barium metal, europium metal, and a melt of imidazole in a redox reaction. Better homogeneity for the distribution of the luminescence centers was achieved by utilizing the hydrides BaH2 and EuH2 instead of the metals.

  1. α-Titanium phosphate intercalated with propylamine: An alternative pathway for efficient europium(III uptake into layered tetravalent metal phosphates

    Directory of Open Access Journals (Sweden)

    Jorge García-Glez

    2017-09-01

    Full Text Available α-Ti(HPO42·H2O (α-TiP and its propylamine intercalation product, Ti(HPO42·2C3H7NH2·H2O (α-TiPPr, have been synthesized and characterized. Later, their sorption capacity for europium(III was investigated, and this purpose was accomplished by treating α-TiP and α-TiPPr with europium(III nitrate solutions at different concentrations until the equilibrium is reached. All samples were characterized, among others, by powder X-ray diffraction (PXRD, scanning and transmission electron microscopies (SEM, TEM, STEM-EDX, SAED, thermogravimetric analysis (TGA, and photoluminescence (PL measurements. The results show that the Eu3+ uptake is limited to surface when α-TiP is used as sorbent. Nevertheless, the Eu-retention is considerably enhanced with α-TiPPr as a consequence of an ion-exchange process into the interlayer space of the layered titanium phosphate (involving propylammonium cations, C3H7NH3+, and hexahydrate europium(III species, [Eu(H2O6]3+, and the crystal structure of a hypothetical final product, α-[Eu(H2O6]2/3Ti(PO42·[(H2O6]1/3, has been proposed by using DFT calculations.

  2. Influence of Heat Treatment on Content of the Carbide Phases in the Microstructure of High-Speed Steel

    Directory of Open Access Journals (Sweden)

    Jaworski J.

    2017-09-01

    Full Text Available This article presents the results of investigations of the effect of heat treatment temperature on the content of the carbide phase of HS3-1-2 and HS6-5-2 low-alloy high-speed steel. Analysis of the phase composition of carbides is carried out using the diffraction method. It is determined that with increasing austenitising temperature, the intensification of dissolution of M6C carbide increases. As a result, an increase in the grain size of the austenite and the amount of retained austenite causes a significant reduction in the hardness of hardened steel HS3-1-2 to be observed. The results of diffraction investigations showed that M7C3 carbides containing mainly Cr and Fe carbides and M6C carbides containing mainly Mo and W carbides are dissolved during austenitisation. During austenitisation of HS3-1-2 steel, the silicon is transferred from the matrix to carbides, thus replacing carbide-forming elements. An increase in a degree of tempering leads to intensification of carbide separation and this process reduce the grindability of tested steels.

  3. Structural Evolution of Molybdenum Carbides in Hot Aqueous Environments and Impact on Low-Temperature Hydroprocessing of Acetic Acid

    Directory of Open Access Journals (Sweden)

    Jae-Soon Choi

    2015-03-01

    Full Text Available We investigated the structural evolution of molybdenum carbides subjected to hot aqueous environments and their catalytic performance in low-temperature hydroprocessing of acetic acid. While bulk structures of Mo carbides were maintained after aging in hot liquid water, a portion of carbidic Mo sites were converted to oxidic sites. Water aging also induced changes to the non-carbidic carbon deposited during carbide synthesis and increased surface roughness, which in turn affected carbide pore volume and surface area. The extent of these structural changes was sensitive to the initial carbide structure and was lower under actual hydroprocessing conditions indicating the possibility of further improving the hydrothermal stability of Mo carbides by optimizing catalyst structure and operating conditions. Mo carbides were active in acetic acid conversion in the presence of liquid water, their activity being comparable to that of Ru/C. The results suggest that effective and inexpensive bio-oil hydroprocessing catalysts could be designed based on Mo carbides, although a more detailed understanding of the structure-performance relationships is needed, especially in upgrading of more complex reaction mixtures or real bio-oils.

  4. Silicon Carbide (SiC) Power Processing Unit (PPU) for Hall Effect Thrusters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this SBIR project, APEI, Inc. is proposing to develop a high efficiency, rad-hard 3.8 kW silicon carbide (SiC) Power Processing Unit (PPU) for Hall Effect...

  5. The Affordable Pre-Finishing of Silicon Carbide for Optical Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Creare proposes to develop a novel, laser-assisted, pre-finishing process for chemical vapor deposition (CVD) coated silicon-carbide ceramics. Our innovation will...

  6. CHARACTERIZATION OF PRECIPITATES IN CUBIC SILICON CARBIDE IMPLANTED WITH 25Mg+ IONS

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Weilin; Spurgeon, Steven R.; Liu, Jia; Edwards, Danny J.; Schreiber, Daniel K.; Henager, Charles H.; Kurtz, Richard J.; Wang, Yongqiang

    2016-09-26

    The aim of this study is to characterize precipitates in Mg+ ion implanted and high-temperature annealed cubic silicon carbide using scanning transmission electron microscopy, electron energy loss spectroscopy and atom probe tomography.

  7. Combustion synthesis of nano-sized tungsten carbide powder and effects of sodium halides

    Science.gov (United States)

    Won, H. I.; Nersisyan, H. H.; Won, C. W.

    2010-02-01

    The synthesis of nano-size tungsten carbide powder has been investigated with a WO3 + Mg + C + carbonate system using alkali halides. The effects of different types of alkali halides on combustion temperature and tungsten carbide formation were discussed. Sodium fluoride had a notable effect on the particle size of the product and the degree of transformation from the initial mixture. A small amount of ammonium carbonate activated the carburization of tungsten carbide by the gas phase carbon transportation. X-ray diffraction data and particle analysis showed that the final product synthesized from a WO3-Mg-C-(NH4)2CO3-NaF system contains pure-phase tungsten carbide with a particle size of 50-100 nm.

  8. MUTUAL SOLUBILITY ОF CARBIDES WITHIN MULTICOMPONENT DIFFUSIVE COATINGS ОN HARD ALLOYS

    Directory of Open Access Journals (Sweden)

    A. A. Shmatov

    2008-01-01

    Full Text Available An optimization of powder mixtures has been performed with respect to wear resistance of  diffusive carbide coatings on hard alloy Т15К6 (79% WC, 15% TiC and 6% Co for four three-component systems, viz. Cr–Ti–V, Cr–V–Mo, Cr–Ti–Mo and Cr–V–Nb,. The «composition-properties» diagrams have been plotted using the obtained mathematical models. Optimum three-component diffusive saturation of a hard alloy using carbide-forming elements permits to increase its service life by the factor of 2.2–3.1 as compared with one-component saturation. This significant improvement of wear resistance of three-component diffusive carbide coatings is due to formation of heterogeneous microstructure containing complex alloyed carbides of IV-VI-group metals with 2–30% mutually soluble one- or two- saturating elements. 

  9. Ultra-Lightweight, High Efficiency Silicon-Carbide (SIC) Based Power Electronic Converters Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In Phase I of this project, APEI, Inc. proved the feasibility of creating ultra-lightweight power converters (utilizing now emerging silicon carbide [SiC] power...

  10. The effects of stoichiometry on the mechanical properties of icosahedral boron carbide under loading.

    Science.gov (United States)

    Taylor, DeCarlos E; McCauley, James W; Wright, T W

    2012-12-19

    The effects of stoichiometry on the atomic structure and the related mechanical properties of boron carbide (B(4)C) have been studied using density functional theory and quantum molecular dynamics simulations. Computational cells of boron carbide containing up to 960 atoms and spanning compositions ranging from 6.7% to 26.7% carbon were used to determine the effects of stoichiometry on the atomic structure, elastic properties, and stress-strain response as a function of hydrostatic, uniaxial, and shear loading paths. It was found that different stoichiometries, as well as variable atomic arrangements within a fixed stoichiometry, can have a significant impact on the yield stress of boron carbide when compressed uniaxially (by as much as 70% in some cases); the significantly reduced strength of boron carbide under shear loading is also demonstrated.

  11. Novel Silicon Carbide Deep Ultraviolet Detectors: Device Modeling, Characterization, Design and Prototyping Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Silicon Carbide deep UV detectors can achieve large gains, high signal-to-noise ratios and solar-blind operation, with added benefits of smaller sizes, lower...

  12. Silicon-Carbide Power MOSFET Performance in High Efficiency Boost Power Processing Unit for Extreme Environments

    Science.gov (United States)

    Ikpe, Stanley A.; Lauenstein, Jean-Marie; Carr, Gregory A.; Hunter, Don; Ludwig, Lawrence L.; Wood, William; Del Castillo, Linda Y.; Fitzpatrick, Fred; Chen, Yuan

    2016-01-01

    Silicon-Carbide device technology has generated much interest in recent years. With superior thermal performance, power ratings and potential switching frequencies over its Silicon counterpart, Silicon-Carbide offers a greater possibility for high powered switching applications in extreme environment. In particular, Silicon-Carbide Metal-Oxide- Semiconductor Field-Effect Transistors' (MOSFETs) maturing process technology has produced a plethora of commercially available power dense, low on-state resistance devices capable of switching at high frequencies. A novel hard-switched power processing unit (PPU) is implemented utilizing Silicon-Carbide power devices. Accelerated life data is captured and assessed in conjunction with a damage accumulation model of gate oxide and drain-source junction lifetime to evaluate potential system performance at high temperature environments.

  13. Single-Event Effects in Silicon and Silicon Carbide Power Devices

    Science.gov (United States)

    Lauenstein, Jean-Marie; Casey, Megan C.; LaBel, Kenneth A.; Topper, Alyson D.; Wilcox, Edward P.; Kim, Hak; Phan, Anthony M.

    2014-01-01

    NASA Electronics Parts and Packaging program-funded activities over the past year on single-event effects in silicon and silicon carbide power devices are presented, with focus on SiC device failure signatures.

  14. Low-Cost, Silicon Carbide Replication Technique for LWIR Mirror Fabrication Project

    Data.gov (United States)

    National Aeronautics and Space Administration — SSG proposes an innovative optical manufacturing approach that will enable the low-cost fabrication of lightweighted, Long Wave Infrared (LWIR) Silicon Carbide (SiC)...

  15. Silicon Carbide Lightweight Optics With Hybrid Skins for Large Cryo Telescopes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Optical Physics Company (OPC) has developed new silicon carbide (SiC) foam-based optics with hybrid skins that are composite, athermal and lightweight (FOCAL) that...

  16. Silicon Carbide Lightweight Optics With Hybrid Skins for Large Cryo Telescopes Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Optical Physics Company (OPC) proposes to manufacture new silicon carbide (SiC) foam-based optics that are composite, athermal and lightweight (FOCAL) that provide...

  17. Silicon carbide-based hydrogen gas sensors for high-temperature applications

    National Research Council Canada - National Science Library

    Kim, Seongjeen; Choi, Jehoon; Jung, Minsoo; Joo, Sungjae; Kim, Sangchoel

    2013-01-01

    .... In this work, a thin tantalum oxide (Ta2O5) layer was exploited with the purpose of sensitivity improvement, because tantalum oxide has good stability at high temperature with high permeability for hydrogen gas. Silicon carbide (SiC...

  18. Tailoring the graphene/silicon carbide interface for monolithic wafer-scale electronics

    National Research Council Canada - National Science Library

    Hertel, S; Waldmann, D; Jobst, J; Albert, A; Albrecht, M; Reshanov, S; Schöner, A; Krieger, M; Weber, H B

    2012-01-01

    .... Here in the search for a comprehensive concept for wafer-scale graphene electronics, we present a monolithic transistor that uses the entire material system epitaxial graphene on silicon carbide (0001...

  19. TRANSFORMATIONS IN NANO-DIAMONDS WITH FORMATION OF NANO-POROUS SILICON CARBIDE AT HIGH PRESSURE

    Directory of Open Access Journals (Sweden)

    V. N. Kovalevsky

    2010-01-01

    Full Text Available The paper contains investigations on regularities of diamond - silicon carbide composite structure formation at impact-wave excitation. It has been determined that while squeezing a porous blank containing Si (SiC nano-diamond by explosive detonation products some processes are taking place such as diamond nano-particles consolidation, reverse diamond transition into graphite, fragments formation from silicon carbide. A method for obtaining high-porous composites with the presence of ultra-disperse diamond particles has been developed. Material with three-dimensional high-porous silicon-carbide structure has been received due to nano-diamond graphitation at impact wave transmission and plastic deformation. The paper reveals nano-diamonds inverse transformation into graphite and its subsequent interaction with the silicon accompanied by formation of silicon-carbide fragments with dimensions of up to 100 nm.

  20. The First JFET-based Silicon Carbide Active Pixel Sensor UV Imager Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Solar-blind ultraviolet (UV) imaging is critically important in the fields of space astronomy, national defense, and bio-chemistry. United Silicon Carbide, Inc....

  1. The First JFET-Based Silicon Carbide Active Pixel Sensor UV Imager Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Solar-blind ultraviolet (UV) imaging is needed in the fields of astronomy, national defense, and bio-chemistry. United Silicon Carbide, Inc. proposes to develop a...

  2. High-temperature plastic flow behaviour in the binder of WC-Co cemented carbides

    Science.gov (United States)

    Lee, In-Chul

    1996-04-01

    Co-rich solid solution alloys regarded as the composition of binder phasesat elevated temperatures in WC-Co cemented carbides were fabricated and the high-temperature deformation behaviour of the alloys was investigated. The logarithmic relationship between flow stress and strain rate is expressed by a single straight line with the slope of 0.15 at a constant temperature in all strain rate range examined, unlike in cemented carbides showing the sigmoidal behaviour. The solid solution hardening due to the addition of Cr3C2 and VC is negligible in the Co-9WC-lCr3C2-0.5VC alloy and the mutual relation in flow stress is different between the cemented carbides and their binder phases in region I. The plastic flow in region I in WC-Co cemented carbides cannot be explained by the flow stress or flow behaviour in the binder phase.

  3. Preparation of tantalum carbide films by reaction of electrolytic carbon coating with the tantalum substrate

    OpenAIRE

    Massot, Laurent; Chamelot, Pierre; Taxil, Pierre

    2006-01-01

    This article demonstrates that coatings of tantalum carbide can be obtained by electrodeposition of carbon in molten fluorides on a tantalum substrate as an alternative to the CVD process. The structural characteristics of the carbon deposited by the electrolytic route lead to a high reactivity of this element towards a tantalum cathode to produce tantalum carbide. Mutual reactivity was shown to be enhanced if tantalum plate is replaced by an electrodeposited layer of tantalum, where th...

  4. A Study On The Metal Carbide Composite Diffusion Bonding For Mechanical Seal

    OpenAIRE

    Kim D.-K.; Shon I.-J.; Song J.; Ryu W.-J.; Shin H.-Ch.; Kwon E.-Y.; Shin H; Kang S.-J.

    2015-01-01

    Mechanical Seal use highly efficient alternative water having a great quantity of an aqueous solution and has an advantage no corrosion brine. Metal Carbide composites have been investigated as potential materials for high temperature structural applications and for application in the processing industry. The existing Mechanical seal material is a highly expensive carbide alloy, and it is difficult to take a price advantage. Therefore the study of replacing body area with inexpensive steel ma...

  5. An expeditious synthesis of early transition metal carbide nanoparticles on graphitic carbons.

    Science.gov (United States)

    Ressnig, Debora; Moldovan, Simona; Ersen, Ovidiu; Beaunier, Patricia; Portehault, David; Sanchez, Clément; Carenco, Sophie

    2016-08-07

    An expeditious synthesis of metal carbide nanoparticles onto various carbon supports is demonstrated. The procedure is versatile and readily yields TiC, VC, Mo2C and W2C nanoparticles on different types of carbons. The reaction is initiated at room temperature and proceeds within seconds. This novel synthetic route paves the way for a large variety of metal carbide-carbon nanocomposites that may be implemented in emerging nanotechnology fields.

  6. Synthesis of high active catalytic systems based on double molybdenum carbides

    OpenAIRE

    Dolmatov Vladimir; Kuznetsov Sergey; Rebrov Evgeny; Schouten Jacob Cornelis

    2015-01-01

    A new two-stage synthesis of double molybdenum and nickel carbides and high active and stable catalytic coatings of nickelpromoter molybdenum carbide in molten salts is developed. The first stage includes the formation of molybdenum–nickel alloys by an electrolytic method and currentless transfer in chloride melts. The second stage consists in the carbonization of the alloys in chloride-carbonate melt under various synthesis conditions. The stabilities of the nickel-promoter catalyti...

  7. The influence of chosen modifiers on stereological parameters of carbides of chromium cast iron

    Directory of Open Access Journals (Sweden)

    A. Studnicki

    2011-07-01

    Full Text Available The results of investigations of stereological carbides in the modified wear resistance chromium cast iron resistant were introduced in the article. There were following elements: boron, niobium, vanadium, cerium and lanthanum (RE, nitrogen in the composition of modifiers. The influence of used modifiers on such stereological parameters of carbides as: size, perimeter, shape coefficient and volume fraction was showed in tables and on diagrams.

  8. Tungsten carbide promoted Pd and Pd-Co electrocatalysts for formic acid electrooxidation

    Science.gov (United States)

    Yin, Min; Li, Qingfeng; Jensen, Jens Oluf; Huang, Yunjie; Cleemann, Lars N.; Bjerrum, Niels J.; Xing, Wei

    2012-12-01

    Tungsten carbide (WC) promoted palladium (Pd) and palladium-cobalt (Pd-Co) nanocatalysts are prepared and characterized for formic acid electrooxidation. The WC as the dopant to carbon supports is found to enhance the CO tolerance and promote the activity of the Pd-based catalysts for formic acid oxidation. Alloying of Pd with Co further improves the electrocatalytic activity and stability of the WC supported catalysts, attributable to a synergistic effect of the carbide support and PdCo alloy nanoparticles.

  9. Process to produce silicon carbide fibers using a controlled concentration of boron oxide vapor

    Science.gov (United States)

    Barnard, Thomas Duncan (Inventor); Lipowitz, Jonathan (Inventor); Nguyen, Kimmai Thi (Inventor)

    2001-01-01

    A process for producing polycrystalline silicon carbide by heating an amorphous ceramic fiber that contains silicon and carbon in an environment containing boron oxide vapor. The boron oxide vapor is produced in situ by the reaction of a boron containing material such as boron carbide and an oxidizing agent such as carbon dioxide, and the amount of boron oxide vapor can be controlled by varying the amount and rate of addition of the oxidizing agent.

  10. Abrasive Wear Resistance of Overlay Composite Alloy with Addition of Carbide Powders

    OpenAIRE

    Tadao, ARAKI; Minoru, NISHIDA; Akio, HIROSE; Kouji, YANO; HIroshi, FUJITA; Faculty of Eng., Ehime University; Faculty of Eng., Ehime University; Faculty of Eng., Osaka University; Kawasaki Steel Co., Ltd.; Tokuden Co., Ltd.

    1993-01-01

    The overall objective of this project is to provide data showing how carbide powder in addition to base alloy powder can be used effectively to increase hardness of overlay alloy and resistance to abrasive wear. An experimental study was performed to examine combinations of base alloy powders and reinforcing powders. The base alloy powders considered were stainless steel, Ni-base alloy, Co-base alloy and high speed steel powder, while reinforcing powders considered were metal-carbide and cera...

  11. Meteoritic silicon carbide and its stellar sources - Implications for galactic chemical evolution

    Science.gov (United States)

    Ming, Tang; Anders, Edward; Hoppe, Peter; Zinner, Ernst

    1989-01-01

    Interstellar silicon carbide grains in meteorites provide a novel means for studying the carbon-star population of about 5 x 10 to the 9th years ago. Their C-12/C-13 ratios differ greatly from the solar value but resemble those of present-day csrbon stars, implying little change in the galactic C-13 inventory. Isotope data on nitrogen and silicon suggest that the silicon carbide grains come mainly from red giants, with small contributions from novae.

  12. Grinding-induced metallurgical alterations in the binder phase of WC-Co cemented carbides

    OpenAIRE

    Yang, Jing; Roa Rovira, Joan Josep; Schwind, Martin; Odén, M.; Johansonn Joesaar, M. P.; Llanes Pitarch, Luis Miguel

    2017-01-01

    The metallic binder phase dictates the toughening behavior of WC-Co cemented carbides (hardmetals), even though it occupies a relative small fraction of the composite. Studies on deformation and phase transformation of the binder constituent are scarce. Grinding represents a key manufacturing step in machining of hardmetal tools, and is well-recognized to induce surface integrity alterations. In this work, metallurgical alterations of the binder phase in ground WC-Co cemented carbides have be...

  13. Digital image analysis to quantify carbide networks in ultrahigh carbon steels

    Energy Technology Data Exchange (ETDEWEB)

    Hecht, Matthew D.; Webler, Bryan A.; Picard, Yoosuf N., E-mail: ypicard@cmu.edu

    2016-07-15

    A method has been developed and demonstrated to quantify the degree of carbide network connectivity in ultrahigh carbon steels through digital image processing and analysis of experimental micrographs. It was shown that the network connectivity and carbon content can be correlated to toughness for various ultrahigh carbon steel specimens. The image analysis approach first involved segmenting the carbide network and pearlite matrix into binary contrast representations via a grayscale intensity thresholding operation. Next, the carbide network pixels were skeletonized and parceled into braches and nodes, allowing the determination of a connectivity index for the carbide network. Intermediate image processing steps to remove noise and fill voids in the network are also detailed. The connectivity indexes of scanning electron micrographs were consistent in both secondary and backscattered electron imaging modes, as well as across two different (50 × and 100 ×) magnifications. Results from ultrahigh carbon steels reported here along with other results from the literature generally showed lower connectivity indexes correlated with higher Charpy impact energy (toughness). A deviation from this trend was observed at higher connectivity indexes, consistent with a percolation threshold for crack propagation across the carbide network. - Highlights: • A method for carbide network analysis in steels is proposed and demonstrated. • ImageJ method extracts a network connectivity index from micrographs. • Connectivity index consistent in different imaging conditions and magnifications. • Impact energy may plateau when a critical network connectivity is exceeded.

  14. Low Cost Fabrication of Silicon Carbide Based Ceramics and Fiber Reinforced Composites

    Science.gov (United States)

    Singh, M.; Levine, S. R.

    1995-01-01

    A low cost processing technique called reaction forming for the fabrication of near-net and complex shaped components of silicon carbide based ceramics and composites is presented. This process consists of the production of a microporous carbon preform and subsequent infiltration with liquid silicon or silicon-refractory metal alloys. The microporous preforms are made by the pyrolysis of a polymerized resin mixture with very good control of pore volume and pore size thereby yielding materials with tailorable microstructure and composition. Mechanical properties (elastic modulus, flexural strength, and fracture toughness) of reaction-formed silicon carbide ceramics are presented. This processing approach is suitable for various kinds of reinforcements such as whiskers, particulates, fibers (tows, weaves, and filaments), and 3-D architectures. This approach has also been used to fabricate continuous silicon carbide fiber reinforced ceramic composites (CFCC's) with silicon carbide based matrices. Strong and tough composites with tailorable matrix microstructure and composition have been obtained. Microstructure and thermomechanical properties of a silicon carbide (SCS-6) fiber reinforced reaction-formed silicon carbide matrix composites are discussed.

  15. Characterization of Transition Metal Carbide Layers Synthesized by Thermo-reactive Diffusion Processes

    DEFF Research Database (Denmark)

    Laursen, Mads Brink; Fernandes, Frederico Augusto Pires; Christiansen, Thomas Lundin

    2015-01-01

    be transformed into a layer much richer in Cr7C3 and poorer in Cr23C6 by a subsequent heat treatment. The produced chromium-, vanadium- and titanium carbide layers have hardness values of 2116±37HV, 3022±119HV and 3951±66HV respectively, and subsequent hardening and tempering of treated materials can be done......Hard wear resistant surface layers of transition metal carbides can be produced by thermo-reactive diffusion processes where interstitial elements from a steel substrate together with external sources of transition metals (Ti, V, Cr etc.) form hard carbide and/or nitride layers at the steel surface....... In this study halide-activated pack cementation techniques were used on tool steel Vanadis 6 and martensitic stainless steel AISI 420 in order to produce hard layers of titanium carbide (TiC), vanadium carbide (V8C7) and chromium carbides (Cr23C6 and Cr7C3). Surface layers were characterized by scanning...

  16. Precipitation Behavior of Carbides in H13 Hot Work Die Steel and Its Strengthening during Tempering

    Directory of Open Access Journals (Sweden)

    Angang Ning

    2017-02-01

    Full Text Available The properties of carbides, such as morphology, size, and type, in H13 hot work die steel were studied with optical microscopy, transmission electron microscopy, electron diffraction, and energy dispersive X-ray analysis; their size distribution and quantity after tempering, at different positions within the ingot, were analyzed using Image-Pro Plus software. Thermodynamic calculations were also performed for these carbides. The microstructures near the ingot surface were homogeneous and had slender martensite laths. Two kinds of carbide precipitates have been detected in H13: (1 MC and M6C, generally smaller than 200 nm; and (2 M23C6, usually larger than 200 nm. MC and M6C play the key role in precipitation hardening. These are the most frequent carbides precipitating at the halfway point from the center of the ingot, and the least frequent at the surface. From the center of the ingot to its surface, the size and volume fraction of the carbides decrease, and the toughness improves, while the contribution of the carbides to the yield strength increases.

  17. Transformation of carbide phases during tempering a low-alloyed Cr-Mo-V-steel

    Energy Technology Data Exchange (ETDEWEB)

    Janovec, J.; Vyrostkova, A.; Stefan, B.; Gueth, A.

    1989-03-01

    The influence of a tempering treatment (550 to 750/sup 0/C/1 to 100 h) on the precipitation of carbides was studied in a low-alloyed Cr-Mo-V-steel using analytical electron microscopy (STEM/EDXS) and electron diffraction techniques (ED). The morphology, crystallography and chemistry of each of the various types of carbides examined, has been established. Four types of carbide phases were detected in the microstructure: M/sub 3/C, M/sub 7/C/sub 3/, M/sub 23/C/sub 6/ and MC. With increasing Larsen-Miller-parameter chromium is enriched in M/sub 3/C particles. This process is limited by the chemical composition of the M/sub 7/C/sub 3/ carbide formed by 'in-situ' transformation M/sub 3/C->M/sub 7/C/sub 3/. The composition of the M/sub 7/C/sub 3/ carbide is almost constant for different tempering conditions. The V/Mo ratio in the MC particles depends on the Larsen-Miller-parameter. From the observations a diagram of the existence of carbide phases was derived for the experimental steel. (orig.).

  18. Electron tunneling transport across heterojunctions between europium sulfide and indium arsenide

    Science.gov (United States)

    Kallaher, Raymond L.

    This dissertation presents research done on utilizing the ferromagnetic semiconductor europium sulfide (EuS) to inject spin polarized electrons into the non-magnetic semiconductor indium arsenide (InAs). There is great interest in expanding the functionality of modern day electronic circuits by creating devices that depend not only on the flow of charge in the device, but also on the transport of spin through the device. Within this mindset, there is a concerted effort to establish an efficient means of injecting and detecting spin polarized electrons in a two dimensional electron system (2DES) as the first step in developing a spin based field effect transistor. Thus, the research presented in this thesis has focused on the feasibility of using EuS, in direct electrical contact with InAs, as a spin injecting electrode into an InAs 2DES. Doped EuS is a concentrated ferromagnetic semiconductor, whose conduction band undergoes a giant Zeeman splitting when the material becomes ferromagnetic. The concomitant difference in energy between the spin-up and spin-down energy bands makes the itinerant electrons in EuS highly spin polarized. Thus, in principle, EuS is a good candidate to be used as an injector of spin polarized electrons into non-magnetic materials. In addition, the ability to adjust the conductivity of EuS by varying the doping level in the material makes EuS particularly suited for injecting spins into non-magnetic semiconductors and 2DES. For this research, thin films of EuS have been grown via e-beam evaporation of EuS powder. This growth technique produces EuS films that are sulfur deficient; these sulfur vacancies act as intrinsic electron donors and the resulting EuS films behave like heavily doped ferromagnetic semiconductors. The growth parameters and deposition procedures were varied and optimized in order to fabricate films that have minimal crystalline defects. Various properties and characteristics of these EuS films were measured and compared to

  19. Highly dispersed molybdenum carbide as non-noble electrocatalyst for PEM fuel cells: Performance for CO electrooxidation

    Energy Technology Data Exchange (ETDEWEB)

    Guil-Lopez, R.; Martinez-Huerta, M.V.; Pena, M.A.; Fierro, J.L.G. [Instituto de Catalisis y Petroleoquimica (CSIC), Marie Curie 2, Cantoblanco, E-28049 Madrid (Spain); Guillen-Villafuerte, O.; Pastor, E. [Departamento de Quimica Fisica, Universidad de La Laguna, Astrofisico Francisco Sanchez s/n, E-38071 La Laguna, Tenerife (Spain)

    2010-08-15

    CO electrooxidation on nanocrystalline molybdenum carbide has been studied through CO stripping measurements using cyclic voltammetry. The active molybdenum carbide was obtained from the carbothermic reduction of really very small molybdenum oxide particles supported on Vulcan XC-72 carbon black (CB). In order to obtain highly dispersed molybdenum carbide particles, low molybdenum loading and control of the carbothermic reduction conditions of CB-supported molybdenum oxide were employed to avoid Mo sintering during the carburization process. This work provides experimental evidence on the CO electrooxidation capability of the Mo carbide phase, which to the best of our knowledge is reported for the first time. The small particle size of carbide electrocatalyst exhibited better performance for CO electrooxidation than the commercial bulk molybdenum carbide sample. (author)

  20. Synthesis of silicon carbide fibers from polycarbosilane by electrospinning method

    Science.gov (United States)

    Yue, Yuan

    Silicon carbide (SiC) is widely used in many fields due to its unique properties. Bulk SiC normally has a flexural strength of 500 -- 550 MPa, a Vickers hardness of ~27 GPa, a Young's modulus of 380 -- 430 GPa, and a thermal conductivity of approximately 120 W/mK. SiC fibers are of great interest since they are the good candidates for reinforcing ceramic matrix composites (CMCs) because of the weavability and high temperature strength of about two to three GPa at about 1000 °C. Silicon carbide fibers have been synthesized from polycarbosilane (PCS) with ~25 μm diameter using the melt-spinning method, followed by the curing and pyrolysis. In order to fabricate SiC fibers with small diameters, electrospinning method has been studied. The electrospinning technique is notable in that the fiber diameters can be controlled over a scale of nanometers to micrometers by controlling the processing parameters. However, there have only been limited studies of synthesis of silicon carbide fibers from polycarbosilane by electrospinning method. Moreover, there is no previous report for tensile strength testing of SiC fibers synthesized by electrospinning. The main objectives of this thesis are to study these problems. In this study, SiC fibers were obtained from polycarbosilane solutions using electrospinning method. In these solutions, dimethylformamide (DMF) and xylene were used as the solvents. The spinnability of the solutions was studied at different polycarbosilane concentrations, as were the ratios between DMF and xylene. The influence of electrospinning parameters such as voltage, flow rate and volume ratio of solvent on fiber diameter were studied. It was found that a minimal DMF content was ii required for the solutions to be spinnable for each PCS concentration. However, DMF content could not exceed 40% of the solvent volume, otherwise PCS could not be dissolved. The fiber diameters increased with increasing flow rate, and slightly decreased with increasing applied