WorldWideScience

Sample records for european large-area iso

  1. The European Large Area ISO Survey

    DEFF Research Database (Denmark)

    Oliver, S.; Rowan-Robinson, M.; Alexander, D.M.

    2000-01-01

    We describe the European Large Area ISO Survey (ELAIS). ELAIS was the largest single Open Time project conducted by ISO, mapping an area of 12 deg(2) at 15 mu m with ISOCAM and at 90 mu m with ISOPHOT. Secondary surveys in other ISO bands were undertaken by the ELAIS team within the fields...

  2. The European large area ISO survey - III. 90-mu m extragalactic source counts

    DEFF Research Database (Denmark)

    Efstathiou, A.; Oliver, S.; Rowan-Robinson, M.

    2000-01-01

    We present results and source counts at 90 mum extracted from the preliminary analysis of the European Large Area ISO Survey (ELAIS). The survey covered about 12 deg(2) of the sky in four main areas and was carried out with the ISOPHOT instrument onboard the Infrared Space Observatory (ISO...

  3. The European Large Area ISO Survey - IV. The preliminary 90-mu m luminosity function

    DEFF Research Database (Denmark)

    Serjeant, S.; Efstathiou, A.; Oliver, S.

    2001-01-01

    We present the luminosity function of 90-mum-selected galaxies from the European Large Area ISO Survey (ELAIS), extending to z = 0.3. Their luminosities are in the range 10(9)

  4. The European Large-Area ISO Survey (ELAIS): the final band-merged catalogue

    DEFF Research Database (Denmark)

    Rowan-Robinson, M.; Lari, C.; Perez-Fournon, I.

    2004-01-01

    per cent of 15-mum galaxies with known z), many with Arp220-like SEDs. 10 per cent of the 15-mum sources are genuine optically blank fields to r' = 24: these must have very high infrared-to-optical ratios and probably have z > 0.6, so are high-luminosity dusty starbursts or Type 2 AGN. Nine...... between z = 0 and 1. There is also a surprisingly large population of luminous (L-ir > 11.5), cool (cirrus-type SEDs) galaxies, with L-ir L-opt > 0, implying A(V) > 1....... (AGN) dust torus models. Spectroscopic redshifts are tabulated, where available. For the N1 and N2 areas, the Isaac Newton Telescope ugriz Wide Field Survey permits photometric redshifts to be estimated for galaxies and quasars. These agree well with the spectroscopic redshifts, within the uncertainty...

  5. Application of ISO 9000 Standards to Education and Training. Interpretation and Guidelines in a European Perspective. CEDEFOP Document.

    Science.gov (United States)

    Van den Berghe, Wouter

    This report brings together European experience on the interpretation and implementation of ISO 9000 in education and training (ET) environments. Chapter 1 discusses the importance of quality concepts in ET and summarizes key concepts of total quality management (TQM) and its relevance for ET. Chapter 2 introduces the ISO 9000 standards. It…

  6. Large area LED package

    Science.gov (United States)

    Goullon, L.; Jordan, R.; Braun, T.; Bauer, J.; Becker, F.; Hutter, M.; Schneider-Ramelow, M.; Lang, K.-D.

    2015-03-01

    Solid state lighting using LED-dies is a rapidly growing market. LED-dies with the needed increasing luminous flux per chip area produce a lot of heat. Therefore an appropriate thermal management is required for general lighting with LEDdies. One way to avoid overheating and shorter lifetime is the use of many small LED-dies on a large area heat sink (down to 70 μm edge length), so that heat can spread into a large area while at the same time light also appears on a larger area. The handling with such small LED-dies is very difficult because they are too small to be picked with common equipment. Therefore a new concept called collective transfer bonding using a temporary carrier chip was developed. A further benefit of this new technology is the high precision assembly as well as the plane parallel assembly of the LED-dies which is necessary for wire bonding. It has been shown that hundred functional LED-dies were transferred and soldered at the same time. After the assembly a cost effective established PCB-technology was applied to produce a large-area light source consisting of many small LED-dies and electrically connected on a PCB-substrate. The top contacts of the LED-dies were realized by laminating an adhesive copper sheet followed by LDI structuring as known from PCB-via-technology. This assembly can be completed by adding converting and light forming optical elements. In summary two technologies based on standard SMD and PCB technology have been developed for panel level LED packaging up to 610x 457 mm2 area size.

  7. Proceedings of the 4. European Workshop on Occupational Exposure Management at NPPs (ISOE '04)

    Energy Technology Data Exchange (ETDEWEB)

    D' Ascenzo, Lucie [ISOE ETC - CEPN, BP 48, 92263 Fontenay-aux-Roses Cedex (France)

    2004-07-01

    The European ISOE Technical Centre co-organised with the International Atomic Energy Agency, the Fourth European ISOE Workshop on Occupational Exposure at Nuclear Power Plants in March 2004, at Lyon, France. 190 participants from 26 countries, European (all countries from western and central Europe with nuclear power plants), American (Canada and United States) and Asian (China, Japan, Korea) attended the meeting with a good balance between utilities, regulatory bodies and contractors. The IAEA supported participants from Central and Eastern European countries as well as from Eastern Asia. The workshop allowed 35 oral presentations and 28 posters presentations to be provided. A very informative exhibition was held by vendors and allowed participants to know more about their products during the coffee-breaks. All participants were split into small groups devoted to 10 pre-selected themes. Each group met twice and reached recommendations. Three papers were awarded during the workshop: - 'ALARA versus reactor safety concern - a practical case' by S. Hennigor and B. Oegren; - 'Recent international developments on contamination limits on packages' by J. Hesse and B. Lorenz; - 'Advantages of combining gamma scanning techniques and 3D dose simulation in dose optimisation problems; by F. Vermeersch. Five main recommendations were agreed on by the participants: 1. There is a need for harmonizing regulations in order to maintain a high status of radiological protection at an international level in a deregulated context; 2. The regulatory bodies should also harmonize the contents of training, particularly in the context of workforce ageing; 3. The international organisations and regulatory bodies should take the lead to harmonize at the international level a dose passport for itinerant workers; 4. Radiological protection indicators should be selected to help in optimising doses, provide indication for continuous improvement, estimate the effectiveness

  8. Flexible scope for ISO 15189 accreditation: a guidance prepared by the European Federation of Clinical Chemistry and Laboratory Medicine (EFLM) Working Group Accreditation and ISO/CEN standards (WG-A/ISO).

    Science.gov (United States)

    Thelen, Marc H M; Vanstapel, Florent J L A; Kroupis, Christos; Vukasovic, Ines; Boursier, Guilaime; Barrett, Edward; Bernabeu Andreu, Francisco; Brguljan, Pika Meško; Brugnoni, Duilio; Lohmander, Maria; Sprongl, Ludek; Vodnik, Tatjana; Ghita, Irina; Vaubourdolle, Michel; Huisman, Willem

    2015-07-01

    The recent revision of ISO15189 has further strengthened its position as the standard for accreditation for medical laboratories. Both for laboratories and their customers it is important that the scope of such accreditation is clear. Therefore the European co-operation for accreditation (EA) demands that the national bodies responsible for accreditation describe the scope of every laboratory accreditation in a way that leaves no room for doubt about the range of competence of the particular laboratories. According to EA recommendations scopes may be fixed, mentioning every single test that is part of the accreditation, or flexible, mentioning all combinations of medical field, examination type and materials for which the laboratory is competent. Up to now national accreditation bodies perpetuate use of fixed scopes, partly by inertia, partly out of fear that a too flexible scope may lead to over-valuation of the competence of laboratories, most countries only use fixed scopes. The EA however promotes use of flexible scopes, since this allows for more readily innovation, which contributes to quality in laboratory medicine. In this position paper, the Working Group Accreditation and ISO/CEN Standards belonging to the Quality and Regulation Committee of the EFLM recommends using an approach that has led to successful introduction of the flexible scope for ISO15189 accreditation as intended in EA-4/17 in The Netherlands. The approach is risk-based, discipline and competence-based, and focuses on defining a uniform terminology transferable across the borders of scientific disciplines, laboratories and countries.

  9. Design of a lighting system with high-power LEDs, large area electronics, and light management structure in the LUMENTILE European project

    Science.gov (United States)

    Carraro, L.; Simonetta, M.; Benetti, G.; Tramonte, A.; Capelli, G.; Benedetti, M.; Randone, E. M.; Ylisaukko-oja, A.; Keränen, K.; Facchinetti, T.; Giuliani, G.

    2017-02-01

    LUMENTILE (LUMinous ElectroNic TILE) is a project funded by the European Commission with the goal of developing a luminous tile with novel functionalities, capable of changing its color and interact with the user. Applications include interior/exterior tile for walls and floors covering, high-efficiency luminaries, and advertising under the form of giant video screens. High overall electrical efficiency of the tile is mandatory, as several millions of square meters are foreseen to be installed each year. Demand is for high uniformity of the illumination of the top tile surface, and for high optical extraction efficiency. These features are achieved by smart light management, using a new approach based on light guiding slab and spatially selective light extraction obtained using both diffusion and/or reflection from the top and bottom interfaces of the optical layer. Planar and edge configurations for the RGB LEDs are considered and compared. A square shape with side length from 20cm to 60cm is considered for the tiles. The electronic circuit layout must optimize the electrical efficiency, and be compatible with low-cost roll-to-roll production on flexible substrates. LED heat management is tackled by using dedicated solutions that allow operation in thermally harsh environment. An approach based on OLEDs has also been considered, still needing improvement on emitted power and ruggedness.

  10. Large-area aircraft scanner

    Science.gov (United States)

    Iddings, Frank A.

    A program to determine the feasibility of present state-of-the-art NDI technology to produce a large-area scanner and to identify commercial equipment available to construct the desired system is presented. Work performed to attain these objectives is described, along with suggested modifications to the existing commercial equipment in order to meet the design criteria as closely as possible. Techniques that show the most promise at present are: D-sight, shearography, and pulse IR thermography (PIRT). D-sight is argued to be inadequate alone, but may well help form a system in conjunction with another technique. Shearography requires additional development in the area of stress application along with interpretation and overall application. PIRT is argued to be satisfactory as a large-area scanner system, at least for thin composite and metal panels.

  11. Progress on large area GEMs

    Science.gov (United States)

    Duarte Pinto, S.; Villa, M.; Alfonsi, M.; Brock, I.; Croci, G.; David, E.; de Oliveira, R.; Ropelewski, L.; van Stenis, M.

    2009-12-01

    In 2008, a triple GEM detector prototype with an area of ~ 2000 cm2 has been constructed, based on foils of 66 × 66 cm. GEMs of such dimensions had not been made before, and innovations to the existing technology were introduced to build this detector. This paper discusses these innovations and presents further work on large area GEM development. A single-mask technique overcomes the cumbersome practice of alignment of two masks, which limits the achievable lateral size. The holes obtained with this technique are conical, and have a so-called rim, a small insulating clearance around the hole in the substrate. Further refinements of this technique allow greater control over the shape of holes and the size of rims. Also, an improvement in homogeneity over large areas is expected. Simulation studies have been done to examine the effect of hole shape on the behavior of GEMs. Such studies can help understanding how to use new enhancements of the technique to optimize performance. Many potential applications for large area GEMs foresee large production volumes. Production issues have been studied, and single-mask GEMs turn out to be much more suitable for large scale production than standard GEMs.

  12. Large area and flexible electronics

    CERN Document Server

    Caironi, Mario

    2015-01-01

    From materials to applications, this ready reference covers the entire value chain from fundamentals via processing right up to devices, presenting different approaches to large-area electronics, thus enabling readers to compare materials, properties and performance.Divided into two parts, the first focuses on the materials used for the electronic functionality, covering organic and inorganic semiconductors, including vacuum and solution-processed metal-oxide semiconductors, nanomembranes and nanocrystals, as well as conductors and insulators. The second part reviews the devices and applicatio

  13. Progress on large area GEMs

    CERN Document Server

    Pinto, Serge Duarte; Alfonsi, Matteo; Brock, Ian; Croci, Gabriele; David, Eric; De Oliveira, Rui; Ropelewski, Leszek; van Stenis, Miranda

    2009-01-01

    In 2008, a triple GEM detector prototype with an area of ~2000 cm2 has been constructed, based on foils of 66*66 cm. GEMs of such dimensions had not been made before, and innovations to the existing technology were introduced to build this detector. This paper discusses these innovations and presents further work on large area GEM development. A single-mask technique overcomes the cumbersome practice of alignment of two masks, which limits the achievable lateral size. The holes obtained with this technique are conical, and have a so-called rim, a small insulating clearance around the hole in the substrate. Further refinements of this technique allow greater control over the shape of holes and the size of rims. Also, an improvement in homogeneity over large areas is expected. Simulation studies have been done to examine the effect of hole shape on the behavior of GEMs. Such studies can help understanding how to use new enhancements of the technique to optimize performance. Many potential applications for large...

  14. Combining ISO/IEC 17025:2005 and European Commission Decision 2002/657 audit requirements: a practical way forward.

    Science.gov (United States)

    Kay, Jack F

    2012-08-01

    Laboratories involved in the analyses of veterinary drug residues are under increasing pressure to demonstrate that they produce meaningful and reliable data. Quality assurance and quality control systems are implemented in laboratories to provide evidence of this and these are subject to external assessment to ensure that they are effective. Audits to ISO/IEC 17025:2005, an internationally accepted standard, and subsequent accreditation provide laboratories and their customers with a degree of assurance that the laboratories are operating in control and the data they report can be relied on. However, national or regional authorities may place additional requirements on laboratories to ensure quality data are reported. For example, in the European Union, all official control laboratories involved in veterinary drug residue analyses must also meet the requirements of European Commission Decision 2002/657/EC which sets performance criteria for analytical methods used in this area and these are subject to additional audits by national or regional authorities. All audits place considerable time and resource demands on laboratories and this paper discusses the burden audits place on laboratories and describes a UK initiative to combine these audits to the benefit of both the regulatory authority and the laboratory. © 2012 John Wiley & Sons, Ltd.

  15. [The "Hersbruck Model". Application and integration of the DIN EN ISO 9001 quality norms with criteria of the European Foundation for Quality Management in a clinic].

    Science.gov (United States)

    Fritze, B; Amon, U

    1999-11-01

    The german health system has dramatically changed and still continues to do so. Modified aspects concerning economy, customer orientation, competition, quality assurance and quality management seem to be increasingly important. Appropriate response to this challenge demands a relevant adjustment of a quality "philosophy" within a hospital. The "Hersbruck Model" has proven to be a suitable approach: on the basis of a quality management system--established and certified according to DIN EN ISO 9001--it implements all components of the model of the European Foundation for Quality Management. The modern quality tools as Total Quality Management and continuous quality improvement allow a permanent increase of customer/patient satisfaction.

  16. Large area etching for porous semiconductors

    Energy Technology Data Exchange (ETDEWEB)

    Carstensen, J.; Christophersen, M.; Loelkes, S.; Ossei-Wusu, E.; Bahr, J.; Langa, S.; Popkirov, G.; Foell, H. [Faculty of Engineering, Christian-Albrechts-University of Kiel, 24143 Kiel (Germany)

    2005-06-01

    While electrochemical etching of small samples in the 1 cm region is relatively easy, this is not true for large areas, i.e. standard wafer sizes up to 300 mm. The paper outlines the specific demands and difficulties in some detail, discusses large area etching strategies and systems, in particular for very deep macropores, and presents and discusses various results from the large area etching system of the authors. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  17. Stretchable, large-area organic electronics.

    Science.gov (United States)

    Sekitani, Tsuyoshi; Someya, Takao

    2010-05-25

    Stretchability will significantly expand the application scope of electronics, particularly large-area electronics-displays, sensors, and actuators. If arbitrary surfaces and movable parts could be covered with stretchable electronics, which is impossible with conventional electronics, new classes of applications are expected to emerge. A large hurdle is manufacturing electrical wiring with high conductivity, high stretchability, and large-area compatibility. This Review describes stretchable, large-area electronics based on organic field-effect transistors for applications to sensors and displays. First, novel net-shaped organic transistors are employed to realize stretchable, large-area sensor networks that detect distributions of pressure and temperature simultaneously. The whole system is functional even when it is stretched by 25%. In order to further improve stretchability, printable elastic conductors are developed by dispersing single-walled carbon nanotubes (SWNTs) as dopants uniformly in rubbers. Further, we describe integration of printable elastic conductors with organic transistors to construct a rubber-like stretchable active matrix for large-area sensor and display applications. Finally, we will discuss the future prospects of stretchable, large-area electronics with delineating a picture of the next-generation human/machine interfaces from the aspect of materials science and electronic engineering.

  18. Usefulness of EC4 essential criteria for quality systems of medical laboratories as guideline to the ISO 15189 and ISO 17025 documents. European Community Confederation of Clinical Chemistry (EC4) Working Group on Harmonisation of Quality Systems and Accreditation.

    Science.gov (United States)

    Jansen, R T; Kenny, D; Blaton, V; Burnett, D; Huisman, W; Plebani, M; Queraltó, J M; Zérah, S; van Lieshout, J

    2000-10-01

    Many medical laboratories have made a start with the introduction of quality management systems. However, it is still not clear against which standards such systems should be measured. The existing ISO and CEN standards do not cover essential aspects of medical laboratories. The publication of the EC4 Essential Criteria has stimulated the development of the ISO/Draft International Standard 15189. This standard seems adequate for our type of laboratories. However, it is not easy to read. The EC4 Essential Criteria could well serve as a guide, covering additional aspects, e.g. on total quality management and budget management as required in the EFQM model, that are not (yet) included in the ISO standard. In the present article the EC4 Essential Criteria are cross-referenced with two new international ISO standards, ISO/FDIS 15189 and ISO/FDIS 17025, the latter being the successor of ISO guide 25 and EN 45000. Both new ISO documents are in compliance with the new ISO 9000:2000 standard.

  19. Stability of large-area molecular junctions

    NARCIS (Netherlands)

    Akkerman, Hylke B.; Kronemeijer, Auke J.; Harkema, Jan; van Hal, Paul A.; Smits, Edsger C. P.; de Leeuw, Dago M.; Blom, Paul W. M.

    The stability of molecular junctions is crucial for any application of molecular electronics. Degradation of molecular junctions when exposed to ambient conditions is regularly observed. In this report the stability of large-area molecular junctions under ambient conditions for more than two years

  20. Quantitative Mapping of Large Area Graphene Conductance

    DEFF Research Database (Denmark)

    Buron, Jonas Christian Due; Petersen, Dirch Hjorth; Bøggild, Peter

    2012-01-01

    We present quantitative mapping of large area graphene conductance by terahertz time-domain spectroscopy and micro four point probe. We observe a clear correlation between the techniques and identify the observed systematic differences to be directly related to imperfections of the graphene sheet...

  1. Chemical Vapour Deposition of Large Area Graphene

    DEFF Research Database (Denmark)

    Larsen, Martin Benjamin Barbour Spanget

    Chemical Vapor Deposition (CVD) is a viable technique for fabrication of large areas of graphene. CVD fabrication is the most prominent and common way of fabricating graphene in industry. In this thesis I have attempted to optimize a growth recipe and catalyst layer for CVD fabrication of uniform......, single layer, and high carrier mobility large area graphene. The main goals of this work are; (1) explore the graphene growth mechanics in a low pressure cold-wall CVD system on a copper substrate, and (2) optimize the process of growing high quality graphene in terms of carrier mobility, and crystal...... structure. Optimization of a process for graphene growth on commercially available copper foil is limited by the number of aluminium oxide particles on the surface of the catalyst. By replacing the copper foil with a thin deposited copper film on a SiO2/Si or c-plane sapphire wafer the particles can...

  2. Progress on large area GEMs (VCI 2010)

    CERN Document Server

    Villa, Marco; Alfonsi, Matteo; Brock, Ian; Croci, Gabriele; David, Eric; de Oliveira, Rui; Ropelewski, Leszek; Taureg, Hans; van Stenis, Miranda

    2011-01-01

    The Gas Electron Multiplier (GEM) manufacturing technique has recently evolved to allow the production of large area GEMs. A novel approach based on single mask photolithography eliminates the mask alignment issue, which limits the dimensions in the traditional double mask process. Moreover, a splicing technique overcomes the limited width of the raw material. Stretching and handling issues in large area GEMs have also been addressed. Using the new improvements it was possible to build a prototype triple-GEM detector of ~ 2000 cm2 active area, aimed at an application for the TOTEM T1 upgrade. Further refinements of the single mask technique give great control over the shape of the GEM holes and the size of the rims, which can be tuned as needed. In this framework, simulation studies can help to understand the GEM behavior depending on the hole shape.

  3. Large Area Graphene Synthesis and its Applications

    Science.gov (United States)

    2013-12-10

    solar cell , and energy storage (by Prof. Yun, University of Pittsburgh). Results: For integration into scalable devices, Thermal Chemical Vapor...The strategy and mechanism described here open the way for a significantly improved oxidative cleaning of transferred graphene sheets, which may...NBIT Final Report for AOARD Grant FA2386-10-1-4066 “Large area graphene synthesis and its applications” December 10, 2013 Name of Principal

  4. ISO 14001

    DEFF Research Database (Denmark)

    Jørgensen, Tine Herreborg

    2004-01-01

    The aim of this paper is to discuss a number of issues related to ISO 14001, the international standard for environmental management systems (EMS). The standard is a process standard that leaves room for interpretation at company level as well as among lead auditors from certifying bodies....... The paper questions whether the interpretation of the standard is uniform both at national and international levels. The paper also suggests changes of ISO 14001 in order to formulate more clear demands of environmental improvements, to include demand for publication of an environmental report...... and to include product focus more clearly. Secondly the paper briefly presents a cases study of four companies in the automotive industry in South Africa, related to the discussions of ISO 14001 and compliance with environmental regulation....

  5. Supernova Remnants with Fermi Large Area Telescope

    Directory of Open Access Journals (Sweden)

    Caragiulo M.

    2017-01-01

    Full Text Available The Large Area Telescope (LAT, on-board the Fermi satellite, proved to be, after 8 years of data taking, an excellent instrument to detect and observe Supernova Remnants (SNRs in a range of energies running from few hundred MeV up to few hundred GeV. It provides essential information on physical processes that occur at the source, involving both accelerated leptons and hadrons, in order to understand the mechanisms responsible for the primary Cosmic Ray (CR acceleration. We show the latest results in the observation of Galactic SNRs by Fermi-LAT.

  6. The Washington Large Area Time Coincidence Array

    Science.gov (United States)

    Gran, R.; Berns, H.G.; Buchli, M.; Burnett, T.H.; Edmon, P.; Gran, R.; Haff, T.; Lemagie; Muhs, E.; Wheel, G.; Wilkes, R.J.

    2003-07-01

    WALTA (WAshington Large-area Time-coincidence Array) aims to study ultra-high energy (> 1018 eV) cosmic rays (UHECR) by placing detector elements in Seattle area secondary scho ols, and linking their data acquisition systems to the University of Washington via a computer network. The goal of WALTA is to have teachers and students become active participants in forefront scientific project, while building a long term partnership between the scho ols and the university-based physics research community. Considerable progress has been made in recruiting and training teachers and equipping scho ol sites since the last ICRC, including development of a low-cost data acquisition card in collab oration with Fermilab and the University of Nebraska.

  7. Timing Characteristics of Large Area Picosecond Photodetectors

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Bernhard W.; Elagin, Andrey L.; Frisch, H.; Obaid, Razib; Oberla, E; Vostrikov, Alexander; Wagner, Robert G.; Wang, Jingbo; Wetstein, Matthew J.; Northrop, R

    2015-09-21

    The LAPPD Collaboration was formed to develop ultralast large-area imaging photodetectors based on new methods for fabricating microchannel plates (MCPs). In this paper we characterize the time response using a pulsed, sub picosecond laser. We observe single photoelectron time resolutions of a 20 cm x 20 cm MCP consistently below 70 ps, spatial resolutions of roughly 500 pm, and median gains higher than 10(7). The RMS measured at one particular point on an LAPPD detector is 58 ps, with in of 47 ps. The differential time resolution between the signal reaching the two ends of the delay line anode is measured to be 5.1 ps for large signals, with an asymptotic limit falling below 2 ps as noise-over-signal approaches zero.

  8. Energy Management Systems: from EN 16001 to ISO 50001

    OpenAIRE

    DUGLIO, Stefano

    2011-01-01

    In July 2009, The European Standard EN 16001 on the Energy Management Systems was issued. However, different authors have pointed out certain differences between the European Standard EN 16001 and ISO 50001. The article presents the main differences between the old EN 16001 Standard and the new ISO 50001. It also provides important information on the adoption of ISO 50001 at world level.

  9. Large-area plasma processing system

    Energy Technology Data Exchange (ETDEWEB)

    Fernsler, R.F.; Manheimer, W.M.; Meger, R.A.; Murphy, D.P.; Leonhardt, D.; Pechacek, R.E.; Walton, S.G.; Lampe, M.

    1999-07-01

    The Naval Research Laboratory has developed a new type of plasma processing reactor called the Large-Area Plasma Processing System (LAPPS). This device uses a magnetically confined, sheet electron beam to produce planar plasmas with densities up to 5x10{sup 12} cm{sup {minus}3}, area {approximately}1 m{sup 2}, and thickness {approximately} 1 cm. Other LAPPS attributes include high uniformity; operation over a wide range of gas type and pressure; independent control of the ionization rate; efficient production of ions and free radicals; low metastable density; modest gas heating; a low and partially adjustable electron temperature; and independent bias control. Disadvantages of LAPPS include: the need for an energetic electron beam (a few keV and 10's mA/cm{sup 2}); the need for a longitudinal magnetic field ({approximately} 200 G) to confine the beam; cross-field restrictions on the plasma flow, beam-plasma instabilities; and energy losses to the beam dump. This talk will present the theory underlying LAPPS, while the experimental results and future plans will be presented elsewhere.

  10. Performance of large area Micro Pixel Chamber

    CERN Document Server

    Nagayoshi, T; Miuchi, K; Ochi, A; Orito, R; Takada, A; Tanimori, T; Ueno, M

    2003-01-01

    A novel gaseous two-dimensional imaging detector "Micro Pixel Chamber (micro-PIC)" has been developed. This detector is based on double sided printed circuit board (PCB). We have developed large area (10cm x 10cm) micro-PICs with 65536 pixel anodes of 400um pitch on a 100um thick insulating substrate. Achieved energy resolution was 30% (FWHM) at 5.9keV, and a gas gain of 7000 was obtained with argon ethane (8:2) gas mixture. This gain is high enough to detect minimum ionizing particles with such a small electrode pitch. Although several discharges occurred during 65 hours continuous operation, the detectors have kept stable operation with high gain. The micro-PIC is a useful detector for many applications e.g. X-ray, gamma ray, and charged particle imaging. The micro electrode structure allows us to measure directions of primary electrons due to incident X-rays or gamma rays, which provide a strong method for X-ray polarimetry and gamma-ray imaging.

  11. Wind Data Analysis and Wind Flow Simulation Over Large Areas

    Directory of Open Access Journals (Sweden)

    Terziev Angel

    2014-03-01

    Full Text Available Increasing the share of renewable energy sources is one of the core policies of the European Union. This is because of the fact that this energy is essential in reducing the greenhouse gas emissions and securing energy supplies. Currently, the share of wind energy from all renewable energy sources is relatively low. The choice of location for a certain wind farm installation strongly depends on the wind potential. Therefore the accurate assessment of wind potential is extremely important. In the present paper an analysis is made on the impact of significant possible parameters on the determination of wind energy potential for relatively large areas. In the analysis the type of measurements (short- and long-term on-site measurements, the type of instrumentation and the terrain roughness factor are considered. The study on the impact of turbulence on the wind flow distribution over complex terrain is presented, and it is based on the real on-site data collected by the meteorological tall towers installed in the northern part of Bulgaria. By means of CFD based software a wind map is developed for relatively large areas. Different turbulent models in numerical calculations were tested and recommendations for the usage of the specific models in flows modeling over complex terrains are presented. The role of each parameter in wind map development is made. Different approaches for determination of wind energy potential based on the preliminary developed wind map are presented.

  12. Hyperspectral Imagery for Large Area Survey of Organophosphate Pesticides

    Science.gov (United States)

    2015-03-26

    HYPERSPECTRAL IMAGERY FOR LARGE AREA SURVEY OF ORGANOPHOSPHATE PESTICIDES THESIS MARCH 2015...States. AFIT-ENV-MS-15-M-203 HYPERSPECTRAL IMAGERY FOR LARGE AREA SURVEY OF ORGANOPHOSPHATE PESTICIDES THESIS Presented to the Faculty...HYPERSPECTRAL IMAGERY FOR LARGE AREA SURVEY OF ORGANOPHOSPHATE PESTICIDES Daniel R. Baseley, BSE Captain, USAF Committee Membership

  13. Large area resist-free soft lithographic patterning of graphene

    NARCIS (Netherlands)

    George, A.; Mathew, S.; van Gastel, Raoul; Nijland, Maarten; Gopinadhan, K.; Brinks, Peter; Venkatesan, T.; ten Elshof, Johan E.

    2013-01-01

    Large area low-cost patterning is a challenging problem in graphene research. A resist-free, single-step, large area and cost effective soft lithographic patterning strategy is presented for graphene. The technique is applicable on any arbitrary substrate that needs to be covered with a graphene

  14. A Cross-Country Empirical Study Towards the Impact of Following ISO Management System Standards on Euro-Area Economic Confidence

    OpenAIRE

    Armeanu, Stefan Daniel; Vintila, Georgeta; Gherghina, Stefan Cristian

    2017-01-01

    This study aims to examine the impact of following ISO management system standards on economic sentiment indicator (ESI) as proxy of economic agents’ general view concerning economic activity, for 21 European Union member states over 2005-2014. The empirical research comprises ISO standards with reference to management systems towards quality (ISO 9001, ISO 13485, ISO 16949), food safety (ISO 22000), environment (ISO 14001), and information security (ISO 27001). Panel data fixed effects regre...

  15. Large area modules based on low band gap polymers

    DEFF Research Database (Denmark)

    Bundgaard, Eva; Krebs, Frederik C

    2010-01-01

    The use of three low band gap polymers in large area roll-to-roll coated modules is demonstrated. The polymers were prepared by a Stille cross coupling polymerization and all had a band gap around 1.6 eV. The polymers were first tested in small area organic photovoltaic devices which showed...... efficiencies from 0.4 to 2 %. Then large area roll-to-roll coated modules were processed and these showed efficiencies up to 0.6 %. It is clear that further study is necessary before this type of polymer is competitive with P3HT in large area modules....

  16. Theoretical Overview of the Large Area Plasma Processing System (LAPPS)

    National Research Council Canada - National Science Library

    Manheimer, Wallace M

    2000-01-01

    A large area plasma processing system (LAPPS) is under development at NRL. In LAPPS, the plasma is generated by a sheet electron beam with voltages and current densities of the order of kilovolts and tens of milliamps per sq cm...

  17. Large-area single-mode photonic bandgap vcsels

    DEFF Research Database (Denmark)

    Birkedal, Dan; Gregersen, N.; Bischoff, S.

    2003-01-01

    We demonstrate that the photonic bandgap effect can be used to control the modes of large area vertical cavity surface emitting lasers. We obtain more than 20 dB side mode suppression ratios in a 10-micron area device....

  18. ISO27001 / ISO27002 a pocket guide

    CERN Document Server

    Calder, Alan

    2013-01-01

    Information is one of your organisation's most important resources. Keeping it secure is therefore vital to your business. This handy pocket guide is an essential overview of two key information security standards that cover the formal requirements (ISO27001:2013) for creating an Information Security Management System (ISMS), and the best-practice recommendations (ISO27002:2013) for those responsible for initiating, implementing or maintaining it.

  19. Mapping the electrical properties of large-area graphene

    DEFF Research Database (Denmark)

    Bøggild, Peter; Mackenzie, David; Whelan, Patrick Rebsdorf

    2017-01-01

    , and a high measurement effort per device. In this topical review, we provide a comprehensive overview of the issues that need to be addressed by any large-area characterisation method for electrical key performance indicators, with emphasis on electrical uniformity and on how this can be used to provide......The significant progress in terms of fabricating large-area graphene films for transparent electrodes, barriers, electronics, telecommunication and other applications has not yet been accompanied by efficient methods for characterizing the electrical properties of large-area graphene. While...... in the early prototyping as well as research and development phases, electrical test devices created by conventional lithography have provided adequate insights, this approach is becoming increasingly problematic due to complications such as irreversible damage to the original graphene film, contamination...

  20. Large-area OLED lightings and their applications

    Science.gov (United States)

    Park, J. W.; Shin, D. C.; Park, S. H.

    2011-03-01

    In this paper, we review the key issues related to the fabrication of large-area organic light-emitting devices (OLEDs) for lighting applications. We discuss the origin of a short-circuit problem, luminance non-uniformity, hot spot, efficiency reduction (power loss), and heat generation and present the way of suppressing them. We also introduce three different application areas of large-area OLED lighting panels. They can be integrated with a solar cell for power recycling or inorganic LEDs for emotional lightings. The feasibility of using OLEDs for the application of visible-light communications is also reviewed.

  1. Large-area metallic photonic lattices for military applications.

    Energy Technology Data Exchange (ETDEWEB)

    Luk, Ting Shan

    2007-11-01

    In this project we developed photonic crystal modeling capability and fabrication technology that is scaleable to large area. An intelligent optimization code was developed to find the optimal structure for the desired spectral response. In terms of fabrication, an exhaustive survey of fabrication techniques that would meet the large area requirement was reduced to Deep X-ray Lithography (DXRL) and nano-imprint. Using DXRL, we fabricated a gold logpile photonic crystal in the <100> plane. For the nano-imprint technique, we fabricated a cubic array of gold squares. These two examples also represent two classes of metallic photonic crystal topologies, the connected network and cermet arrangement.

  2. Large area high-speed metrology SPM system

    Science.gov (United States)

    Klapetek, P.; Valtr, M.; Picco, L.; Payton, O. D.; Martinek, J.; Yacoot, A.; Miles, M.

    2015-02-01

    We present a large area high-speed measuring system capable of rapidly generating nanometre resolution scanning probe microscopy data over mm2 regions. The system combines a slow moving but accurate large area XYZ scanner with a very fast but less accurate small area XY scanner. This arrangement enables very large areas to be scanned by stitching together the small, rapidly acquired, images from the fast XY scanner while simultaneously moving the slow XYZ scanner across the region of interest. In order to successfully merge the image sequences together two software approaches for calibrating the data from the fast scanner are described. The first utilizes the low uncertainty interferometric sensors of the XYZ scanner while the second implements a genetic algorithm with multiple parameter fitting during the data merging step of the image stitching process. The basic uncertainty components related to these high-speed measurements are also discussed. Both techniques are shown to successfully enable high-resolution, large area images to be generated at least an order of magnitude faster than with a conventional atomic force microscope.

  3. Inkjet technology for large-area OPV applications

    NARCIS (Netherlands)

    Ren, M.; Sweelssen, J.; Andriessen, H.A.J.M.

    2011-01-01

    The roll-to-roll manufacturing process is believed to significantly reduce the cost-price of large area organic photovoltaic systems. Therefore, we build up knowledge base concerning the influence of process conditions on the performance of polymer solar cells. Inkjet printing has been a major

  4. The Technical Communicator and ISO 9000.

    Science.gov (United States)

    Weiss, Edmond H.

    1993-01-01

    Describes the complexities of ISO 9000, a set of generic quality standards to which any commercial firm wishing to do business with a member firm of the European Economic Community will have to comply. Describes opportunities for professional technical communicators in providing the required product documentation. (SR)

  5. Large-area smart glass and integrated photovoltaics

    Energy Technology Data Exchange (ETDEWEB)

    Lampert, C.M. [Star Science, 8730 Water Road, Cotati, CA 94931-4252 (United States)

    2003-04-01

    Several companies throughout the world are developing dynamic glazing and large-area flat panel displays. University and National Laboratory groups are researching new materials and processes to improve these products. The concept of a switchable glazing for building and vehicle application is very attractive. Conventional glazing only offers fixed transmittance and control of energy passing through it. Given the wide range of illumination conditions and glare, a dynamic glazing with adjustable transmittance offers the best solution. Photovoltaics can be integrated as power sources for smart windows. In this way a switchable window could be a completely stand alone smart system. A new range of large-area flat panel display including light-weight and flexible displays are being developed. These displays can be used for banner advertising, dynamic pricing in stores, electronic paper, and electronic books, to name only a few applications. This study covers selected switching technologies including electrochromism, suspended particles, and encapsulated liquid crystals.

  6. Nondestructive large-area composite testing using shearography

    Science.gov (United States)

    Krupka, Rene; Burggraf, Hubert; Rathjen, Dirk

    1999-09-01

    A shearographic measurement system, named ILIAS, is presented which allows the non-contact large area defect detection and structural analysis of composites and other lightweight structures (e.g. in the field of aerospace) with respect to faulty materials and structural defects. Of main interest are defects which are situated below the surface and are not detectable using visual inspection. The use of pulsed illumination additionally allows the vibrational analysis and detection of constructive weak points. In contrast to conventional methods such as ultrasonic, X-ray or eddy current, the ILIAS system allows a fast and large area survey inspection in industrial environments. Applications are presented for composite structures and materials of aircrafts.

  7. Person Attribute Search For Large-Area Video Surveillance

    OpenAIRE

    Thornton, Jason; Butler, Daniel; Baran-Gale, Jeanette; Chan, Michael; Zwahlen, Heather

    2012-01-01

    This article appeared in Homeland Security Affairs (May 2012), supplement 5, article 1 "This paper describes novel video analytics technology which allows an operator to search through large volumes of surveillance video data to find persons that match a particular attribute profile. Since the proposed technique is geared for surveillance of large areas, this profile consists of attributes that are observable at a distance (including clothing information, hair color, gender, etc.) rather t...

  8. Mapping the electrical properties of large-area graphene

    Science.gov (United States)

    Bøggild, Peter; Mackenzie, David M. A.; Whelan, Patrick R.; Petersen, Dirch H.; Due Buron, Jonas; Zurutuza, Amaia; Gallop, John; Hao, Ling; Jepsen, Peter U.

    2017-12-01

    The significant progress in terms of fabricating large-area graphene films for transparent electrodes, barriers, electronics, telecommunication and other applications has not yet been accompanied by efficient methods for characterizing the electrical properties of large-area graphene. While in the early prototyping as well as research and development phases, electrical test devices created by conventional lithography have provided adequate insights, this approach is becoming increasingly problematic due to complications such as irreversible damage to the original graphene film, contamination, and a high measurement effort per device. In this topical review, we provide a comprehensive overview of the issues that need to be addressed by any large-area characterisation method for electrical key performance indicators, with emphasis on electrical uniformity and on how this can be used to provide a more accurate analysis of the graphene film. We review and compare three different, but complementary approaches that rely either on fixed contacts (dry laser lithography), movable contacts (micro four point probes) and non-contact (terahertz time-domain spectroscopy) between the probe and the graphene film, all of which have been optimized for maximal throughput and accuracy, and minimal damage to the graphene film. Of these three, the main emphasis is on THz time-domain spectroscopy, which is non-destructive, highly accurate and allows both conductivity, carrier density and carrier mobility to be mapped across arbitrarily large areas at rates that by far exceed any other known method. We also detail how the THz conductivity spectra give insights on the scattering mechanisms, and through that, the microstructure of graphene films subject to different growth and transfer processes. The perspectives for upscaling to realistic production environments are discussed.

  9. ATTRIBUTION AND CHARACTERISATION OF SCLEROPHYLL FORESTED LANDSCAPES OVER LARGE AREAS

    OpenAIRE

    S. Jones; S. Jones; M. Soto-Berelov; M. Soto-Berelov; L. Suarez; L. Suarez; P. Wilkes; P. Wilkes; W. Woodgate; W. Woodgate; A. Haywood; A. Haywood; A. Haywood

    2016-01-01

    This paper presents a methodology for the attribution and characterisation of Sclerophyll forested landscapes over large areas. First we define a set of woody vegetation data primitives (e.g. canopy cover, leaf area index (LAI), bole density, canopy height), which are then scaled-up using multiple remote sensing data sources to characterise and extract landscape woody vegetation features. The advantage of this approach is that vegetation landscape features can be described from composites of ...

  10. High Energy Astrophysics with the Fermi Large Area Telescope

    Science.gov (United States)

    Hays, Elizabeth

    2009-01-01

    This slide presentation reviews some of the findings of the Large Area Telescope (LAT) aboard the Fermi Observatory. It includes information about the LAT, and the Gamma-Ray Burst Monitor (GBM), detection of the quiet sun and the moon in gamma rays, Pulsars observed by the observatory, Globular Star Clusters, Active Galactic Nucleus, and Gamma-Ray Bursts, with specific information about GRB 080916C.

  11. Gravure printing of graphene for large-area flexible electronics.

    Science.gov (United States)

    Secor, Ethan B; Lim, Sooman; Zhang, Heng; Frisbie, C Daniel; Francis, Lorraine F; Hersam, Mark C

    2014-07-09

    Gravure printing of graphene is demonstrated for the rapid production of conductive patterns on flexible substrates. Development of suitable inks and printing parameters enables the fabrication of patterns with a resolution down to 30 μm. A mild annealing step yields conductive lines with high reliability and uniformity, providing an efficient method for the integration of graphene into large-area printed and flexible electronics. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Semiconductor-based, large-area, flexible, electronic devices

    Science.gov (United States)

    Goyal, Amit [Knoxville, TN

    2011-03-15

    Novel articles and methods to fabricate the same resulting in flexible, large-area, triaxially textured, single-crystal or single-crystal-like, semiconductor-based, electronic devices are disclosed. Potential applications of resulting articles are in areas of photovoltaic devices, flat-panel displays, thermophotovoltaic devices, ferroelectric devices, light emitting diode devices, computer hard disc drive devices, magnetoresistance based devices, photoluminescence based devices, non-volatile memory devices, dielectric devices, thermoelectric devices and quantum dot laser devices.

  13. Advanced Large Area Plastic Scintillator Project (ALPS): Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, David V.; Reeder, Paul L.; Todd, Lindsay C.; Warren, Glen A.; McCormick, Kathleen R.; Stephens, Daniel L.; Geelhood, Bruce D.; Alzheimer, James M.; Crowell, Shannon L.; Sliger, William A.

    2008-02-05

    The advanced Large-Area Plastic Scintillator (ALPS) Project at Pacific Northwest National Laboratory investigated possible technological avenues for substantially advancing the state-of-the-art in gamma-ray detection via large-area plastic scintillators. The three predominant themes of these investigations comprised the following: * Maximizing light collection efficiency from a single large-area sheet of plastic scintillator, and optimizing hardware event trigger definition to retain detection efficiency while exploiting the power of coincidence to suppress single-PMT "dark current" background; * Utilizing anti-Compton vetoing and supplementary spectral information from a co-located secondary, or "Back" detector, to both (1) minimize Compton background in the low-energy portion of the "Front" scintillator's pulse-height spectrum, and (2) sharpen the statistical accuracy of the front detector's low-energy response prediction as impelmented in suitable energy-windowing algorithms; and * Investigating alternative materials to enhance the intrinsic gamma-ray detection efficiency of plastic-based sensors.

  14. Fabrication of large area flexible nanoplasmonic templates with flow coating

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Qian; Devetter, Brent M.; Roosendaal, Timothy; LaBerge, Max; Bernacki, Bruce E.; Alvine, Kyle J.

    2017-07-01

    We describe the development of a custom-built two-axis flow coater for the deposition of polymeric nanosphere monolayers used in the fabrication of large area nanoplasmonic films. The technique described here has the capability of depositing large areas (up to 7” x 10”) of self-assembled monolayers of polymeric nanospheres onto polyethylene terephthalate (PET) films. Here, three sets of film consisting of different diameter (ranging from 100 to 300 nm) polymeric nanospheres were used to demonstrate the capabilities of this instrument. To improve the surface wettability of the PET substrates during wet-deposition we enhanced the wettability by using a forced air blown-arc plasma treatment system. Both the local microstructure, as confirmed by scanning electron microscopy, describing monolayer and multilayer coverage, and the overall macroscopic uniformity of the resultant nanostructured film were optimized by controlling the relative stage to blade speed and nanosphere concentration. As this is a scalable technique, large area films such as the ones described here, have a variety of crucial emerging applications in areas such as energy, catalysis, and chemical sensing.

  15. Development of High Performance Industrial TCO Glass for Very Large Area a-Si:H PV Modules

    NARCIS (Netherlands)

    Vetter, M.; Andreu, J.; Borrajo, J.P.; Martin, A.; Rodriguez, J.A.; Agustsson, O.; Schotsaert, J.; Bittkau, K.; Carius, R.; Gordijn, A.; Hoffmann, A.; Macedo, I.M.; Rath, J.K.|info:eu-repo/dai/nl/304830585; Schropp, R.E.I.|info:eu-repo/dai/nl/072502584; Antony, A.; Bertomeu, J.; Kail, F.

    2011-01-01

    The European project HELATHIS, executed by the five project partners signing this article, is dedicated to the improvement of the efficiency of very large area (5.7m2) silicon thin film photovoltaic (PV) modules. Optical confinement has been identified by the project partners as a major source for

  16. Pilot Production of Large Area Microchannel Plates and Picosecond Photodetectors

    Science.gov (United States)

    Minot, M.; Adams, B.; Abiles, M.; Bond, J.; Craven, C.; Cremer, T.; Foley, M.; Lyashenko, A.; Popecki, M.; Stochaj, M.; Worstell, W.; Elam, J.; Mane, A.; Siegmund, O.; Ertley, C.

    2016-09-01

    Pilot production performance is reported for large area atomic layer deposition (ALD) coated microchannel plates (ALD-GCA-MCPs) and for Large Area Picosecond Photodetectors (LAPPD™) which incorporate them. "Hollowcore" glass capillary array (GCA) substrates are coated with ALD resistive and emissive layers to form the ALDGCA- MCPs, an approach that facilitates independent selection of glass substrates that are mechanically stronger and that have lower levels of radioactive alkali elements compared to conventional MCP lead glass, reducing background noise[1,2,3,4]. ALD-GCA-MCPs have competitive gain ( 104 each or 107 for a chevron pair ), enhanced lifetime and gain stability (7 C cm-2 of charge extraction), reduced background levels (0.028 events cm-2 sec-1) and low gamma-ray detection efficiency. They can be fabricated in large area (20cm X 20 cm) planar and curved formats suitable for use in high radiation environment applications, including astronomy, space instrumentation, and remote night time sensing. The LAPPD™ photodetector incorporates these ALD-GCA-MCPs in an all-glass hermetic package with top and bottom plates and sidewalls made of borosilicate float glass. Signals are generated by a bi-alkali Na2KSb photocathode, amplified with a stacked chevron pair of ALD-GCA-MCPs. Signals are collected on RF strip-line anodes integrated into to the bottom plates which exit the detector via pin-free hermetic seals under the side walls [5]. Tests show that LAPPDTMs have electron gains greater than 107, submillimeter spatial resolution for large (multiphoton) pulses and several mm for single photons, time resolution less than 50 picoseconds for single photons, predicted resolution less than 5 picoseconds for large pulses, high stability versus charge extraction[6], and good uniformity for applications including astrophysics, neutron detection, high energy physics Cherenkov light detection, and quantum-optical photon-correlation experiments.

  17. Large area, surface discharge pumped, vacuum ultraviolet light source

    Science.gov (United States)

    Sze, Robert C.; Quigley, Gerard P.

    1996-01-01

    Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source. A contamination-free VUV light source having a 225 cm.sup.2 emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm.sup.2 at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing.

  18. Large Area Field of View for Fast Temporal Resolution Astronomy

    Science.gov (United States)

    Covarrubias, Ricardo A.

    2018-01-01

    Scientific CMOS (sCMOS) technology is especially relevant for high temporal resolution astronomy combining high resolution, large field of view with very fast frame rates, without sacrificing ultra-low noise performance. Solar Astronomy, Near Earth Object detections, Space Debris Tracking, Transient Observations or Wavefront Sensing are among the many applications this technology can be utilized. Andor Technology is currently developing the next-generation, very large area sCMOS camera with an extremely low noise, rapid frame rates, high resolution and wide dynamic range.

  19. Fermi Large Area Telescope Bright Gamma-ray Source List

    Energy Technology Data Exchange (ETDEWEB)

    Abdo, Aous A.; /Naval Research Lab, Wash., D.C.; Ackermann, M.; /KIPAC, Menlo Park /SLAC; Ajello, M.; /KIPAC, Menlo Park /SLAC; Atwood, W.B.; /UC, Santa Cruz; Axelsson, M.; /Stockholm U., OKC /Stockholm U.; Baldini, L.; /INFN, Pisa; Ballet, J.; /DAPNIA, Saclay; Band, D.L.; /NASA, Goddard /NASA, Goddard; Barbiellini, Guido; /INFN, Trieste /Trieste U.; Bastieri, Denis; /INFN, Padua /Padua U.; Bechtol, K.; /KIPAC, Menlo Park /SLAC; Bellazzini, R.; /INFN, Pisa; Berenji, B.; /KIPAC, Menlo Park /SLAC; Bignami, G.F.; /Pavia U.; Bloom, Elliott D.; /KIPAC, Menlo Park /SLAC; Bonamente, E.; /INFN, Perugia /Perugia U.; Borgland, A.W.; /KIPAC, Menlo Park /SLAC; Bregeon, J.; /INFN, Pisa; Brigida, M.; /Bari U. /INFN, Bari; Bruel, P.; /Ecole Polytechnique; Burnett, Thompson H.; /Washington U., Seattle /Bari U. /INFN, Bari /KIPAC, Menlo Park /SLAC /IASF, Milan /IASF, Milan /DAPNIA, Saclay /ASDC, Frascati /INFN, Perugia /Perugia U. /KIPAC, Menlo Park /SLAC /George Mason U. /Naval Research Lab, Wash., D.C. /NASA, Goddard /KIPAC, Menlo Park /SLAC /INFN, Perugia /Perugia U. /KIPAC, Menlo Park /SLAC /Montpellier U. /Sonoma State U. /Stockholm U., OKC /Royal Inst. Tech., Stockholm /Stockholm U. /KIPAC, Menlo Park /SLAC /ASDC, Frascati /NASA, Goddard /Maryland U. /Naval Research Lab, Wash., D.C. /INFN, Trieste /Pavia U. /Bari U. /INFN, Bari /KIPAC, Menlo Park /SLAC /UC, Santa Cruz /KIPAC, Menlo Park /SLAC /KIPAC, Menlo Park /SLAC /KIPAC, Menlo Park /SLAC /Montpellier U. /Bari U. /INFN, Bari /Ecole Polytechnique /NASA, Goddard; /more authors..

    2009-05-15

    Following its launch in 2008 June, the Fermi Gamma-ray Space Telescope (Fermi) began a sky survey in August. The Large Area Telescope (LAT) on Fermi in three months produced a deeper and better resolved map of the {gamma}-ray sky than any previous space mission. We present here initial results for energies above 100 MeV for the 205 most significant (statistical significance greater than {approx}10{sigma}) {gamma}-ray sources in these data. These are the best characterized and best localized point-like (i.e., spatially unresolved) {gamma}-ray sources in the early mission data.

  20. Method of manufacturing a large-area segmented photovoltaic module

    Science.gov (United States)

    Lenox, Carl

    2013-11-05

    One embodiment of the invention relates to a segmented photovoltaic (PV) module which is manufactured from laminate segments. The segmented PV module includes rectangular-shaped laminate segments formed from rectangular-shaped PV laminates and further includes non-rectangular-shaped laminate segments formed from rectangular-shaped and approximately-triangular-shaped PV laminates. The laminate segments are mechanically joined and electrically interconnected to form the segmented module. Another embodiment relates to a method of manufacturing a large-area segmented photovoltaic module from laminate segments of various shapes. Other embodiments relate to processes for providing a photovoltaic array for installation at a site. Other embodiments and features are also disclosed.

  1. The MSFC large-area imaging multistep proportional counter

    Science.gov (United States)

    Ramsey, B. D.; Weisskopf, M. C.; Joy, M. K.

    1989-01-01

    A large-area multistep imaging proportional counter that is being currently developed at the Marshall Space Flight Center is described. The device, known as a multistep fluorescence gated detector, consists of a multiwire proportional counter (MWPC) with a preamplification region. The MWCP features superior spatial resolution with a very high degree of background rejection. It is ideally suited for use in X-ray astronomy in 20-100 keV energy range. The paper includes the MWPC schematic and a list of instrument specifications.

  2. Flexible large area ferroelectret sensors for location sensitive touchpads

    Science.gov (United States)

    Buchberger, Gerda; Schwödiauer, Reinhard; Bauer, Siegfried

    2008-03-01

    Cellular polypropylene ferroelectrets are flexible transducer materials with dominant longitudinal piezoelectricity. They can be used for transient pressure sensing applications, due to the low cost of the sensor material. The authors show that ferroelectrets allow for the production of keyboards and touch pads with a customizable layout. Large area resistive electrodes on the ferroelectret with electronics at the edges avoid the preparation of complex sensor matrices. A touch pad of 10×10cm2 area was tested by applying a force of 1.7N on an area with a diameter of 5mm in a grid matrix with 23×23 elements.

  3. Large-area, laterally-grown epitaxial semiconductor layers

    Science.gov (United States)

    Han, Jung; Song, Jie; Chen, Danti

    2017-07-18

    Structures and methods for confined lateral-guided growth of a large-area semiconductor layer on an insulating layer are described. The semiconductor layer may be formed by heteroepitaxial growth from a selective growth area in a vertically-confined, lateral-growth guiding structure. Lateral-growth guiding structures may be formed in arrays over a region of a substrate, so as to cover a majority of the substrate region with laterally-grown epitaxial semiconductor tiles. Quality regions of low-defect, stress-free GaN may be grown on silicon.

  4. Application issues for large-area electrochromic windows incommercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eleanor S.; DiBartolomeo, D.L.

    2000-05-01

    Projections of performance from small-area devices to large-area windows and enterprise marketing have created high expectations for electrochromic glazings. As a result, this paper seeks to precipitate an objective dialog between material scientists and building-application scientists to determine whether actual large-area electrochromic devices will result in significant performance benefits and what material improvements are needed, if any, to make electrochromics more practical for commercial building applications. Few in-situ tests have been conducted with large-area electrochromic windows applied in buildings. This study presents monitored results from a full-scale field test of large-area electrochromic windows to illustrate how this technology will perform in commercial buildings. The visible transmittance (Tv) of the installed electrochromic ranged from 0.11 to 0.38. The data are limited to the winter period for a south-east-facing window. The effect of actual device performance on lighting energy use, direct sun control, discomfort glare, and interior illumination is discussed. No mechanical system loads were monitored. These data demonstrate the use of electrochromics in a moderate climate and focus on the most restrictive visual task: computer use in offices. Through this small demonstration, we were able to determine that electrochromic windows can indeed provide unmitigated transparent views and a level of dynamic illumination control never before seen in architectural glazing materials. Daily lighting energy use was 6-24 percent less compared to the 11 percent-glazing, with improved interior brightness levels. Daily lighting energy use was 3 percent less to 13 percent more compared to the 38 percent-glazing, with improved window brightness control. The electrochromic window may not be able to fulfill both energy-efficiency and visual comfort objectives when low winter direct sun is present, particularly for computer tasks using cathode-ray tube (CRT

  5. Ferroelectric Properties of Large Area Evaporated Vinylidene Fluoride Thin Films

    Science.gov (United States)

    Foreman, Keith; Poddar, Shashi; Workman, Adam; Callori, Sara; Ducharme, Stephen; Adenwalla, Shireen

    Organic electronics provide advantages in price, processing, and functionality. Poly(vinylidene fluoride) (PVDF) is a popular organic ferroelectric used a in wide variety of applications. The VDF oligomer features a higher surface charge density than PVDF and its copolymers and oligomer thin films can be deposited in vacuum, allowing for deposition on a metallic thin film without breaking vacuum. Despite these advantages, there has been little work towards employing the VDF oligomer in devices. Here, we report on stable and tunable ferroelectric behavior of large area VDF oligomer thin films and the interface with Co thin films. Pyroelectric measurements are used to identify the operating temperature of VDF oligomer-based devices and probe the stability of the ferroelectric polarization states over long periods of time. Using capacitance-voltage, current-voltage, and x-ray diffraction measurements, the remanent polarization and crystalline phase are reported, and the effects of annealing are clarified. X-ray photoelectron spectroscopy is used to characterize the VDF/Co interface. Finally, piezoresponse force microscopy is used to demonstrate large area ferroelectric domain writing VDF oligomer thin films. This work sets the stage for VDF oligomer based organic electronics. Supported by NSF ECCS-1101256 and MRSEC DMR-1420645.

  6. Characterization and Calibration of Large Area Resistive Strip Micromegas Detectors

    CERN Document Server

    Losel, Philipp Jonathan; The ATLAS collaboration

    2015-01-01

    Resisitve strip Micromegas detectors behave discharge tolerant. They have been tested extensively as smaller detectors of about 10 x 10 cm$^2$ in size and they work reliably at high rates of 100\\,kHz/cm$^2$ and above. Tracking resolutions well below 100\\,$\\mu$m have been observed for 100 GeV muons and pions. Micromegas detectors are meanwhile proposed as large area muon precision trackers of 2-3\\,m$^2$ in size. To investigate possible differences between small and large detectors, a 1\\,m$^2$ detector with 2048 resistive strips at a pitch of 450 $\\mu$m was studied in the LMU Cosmic Ray Facility (CRF) using two 4 $\\times$ 2.2 m$^2$ large Monitored Drift Tube (MDT) chambers for cosmic muon reference tracking. Segmentation of the resistive strip anode plane in 57.6\\,mm x 95\\,mm large areas has been realized by the readout of 128 strips with one APV25 chip each and by 11 95\\,mm broad trigger scintillators placed along the readout strips.\\\\ This allows for mapping of homogenity in pulse height and efficiency, deter...

  7. Characterization and Calibration of Large Area Resistive Strip Micromegas Detectors

    CERN Document Server

    AUTHOR|(INSPIRE)INSPIRE-00389527; The ATLAS collaboration

    2016-01-01

    Resistive strip Micromegas detectors are discharge tolerant. They have been tested extensively as small detectors of about 10 x 10 cm$^2$ in size and they work reliably at high rates of 100 kHz/cm$^2$ and above. Tracking resolution well below 100 $\\mu$m has been observed for 100 GeV muons and pions. Micromegas detectors are meanwhile proposed as large area muon precision trackers of 2-3 m$^2$ in size. To investigate possible differences between small and large detectors, a 1 m$^2$ detector with 2048 resistive strips at a pitch of 450 $\\mu$m was studied in the LMU Cosmic Ray Measurement Facility (CRMF) using two 4 $\\times$ 2.2 m$^2$ large Monitored Drift Tube (MDT) chambers for cosmic muon reference tracking. A segmentation of the resistive strip anode plane in 57.6 mm x 93 mm large areas has been realized by the readout of 128 strips with one APV25 chip each and by eleven 93 mm broad trigger scintillators placed along the readout strips. This allows for mapping of homogeneity in pulse height and efficiency, d...

  8. Large area nanoimprint by substrate conformal imprint lithography (SCIL)

    Science.gov (United States)

    Verschuuren, Marc A.; Megens, Mischa; Ni, Yongfeng; van Sprang, Hans; Polman, Albert

    2017-06-01

    Releasing the potential of advanced material properties by controlled structuring materials on sub-100-nm length scales for applications such as integrated circuits, nano-photonics, (bio-)sensors, lasers, optical security, etc. requires new technology to fabricate nano-patterns on large areas (from cm2 to 200 mm up to display sizes) in a cost-effective manner. Conventional high-end optical lithography such as stepper/scanners is highly capital intensive and not flexible towards substrate types. Nanoimprint has had the potential for over 20 years to bring a cost-effective, flexible method for large area nano-patterning. Over the last 3-4 years, nanoimprint has made great progress towards volume production. The main accelerator has been the switch from rigid- to wafer-scale soft stamps and tool improvements for step and repeat patterning. In this paper, we discuss substrate conformal imprint lithography (SCIL), which combines nanometer resolution, low patterns distortion, and overlay alignment, traditionally reserved for rigid stamps, with the flexibility and robustness of soft stamps. This was made possible by a combination of a new soft stamp material, an inorganic resist, combined with an innovative imprint method. Finally, a volume production solution will be presented, which can pattern up to 60 wafers per hour.

  9. [Meek technique skin graft for treating exceptionally large area burns].

    Science.gov (United States)

    Xu, Qinglian; Cai, Chen; Yu, Youxin; Tang, Yizhong; Hu, Delin; Liu, Sheng; Qi, Weiwei; Shi, Jie

    2010-06-01

    To investigate the clinical effect of Meek technique skin graft in treating exceptionally large area burns. The clinical data were retrospectively analysed from 10 cases of exceptionally large area burns treated with Meek technique skin graft from April 2009 to February 2010 (Meek group), and were compared with those from 10 cases of exceptionally large area burns treated with the particle skin with large sheet of skin allograft transplantation from January 2002 to December 2006 (particle skin group). In Meek group, there were 8 males and 2 females with an average age of 34.5 years (range, 5-55 years), including 6 cases of flame burns, 2 cases of hot liquid burns, 1 case of electrical burn, and 1 case of high-temperature dust burn. The burn area was 82.6% +/- 3.1% of total body surface area (TBSA). The most were deep II degree to III degree burns. The time from burn to hospitalization was (3.5 +/- 1.3) hours. In particle skin group, there were 8 males and 2 females with an average age of 36.8 years (range, 18-62 years), including 5 cases of flame burns, 2 cases of hot liquid burns, and 3 cases of gunpowder explosion injury. The burn area was 84.1% +/- 7.4% of TBSA. The most were deep II degree to III degree burns. The time from burn to hospitalization was (4.9 +/- 2.2) hours. There was no significant difference in general data between 2 groups (P > 0.05). The skin graft survival rate, the time of skin fusion, the systemic wound healing time, and the treatment cost of 1% of burn area were 91.23% +/- 5.61%, (11.14 +/- 2.12) days, (38.89 +/- 10.36) days, and (5113.28 +/- 552.44) yuan in Meek group, respectively; and were 78.65% +/- 12.29%, (18.37 +/- 4.63) days, (48.73 +/- 16.92) days, and (7386.36 +/- 867.64) yuan in particle skin group; showing significant differences between 2 groups (P burns with the advantages of high survival rate of skin graft, short time of skin fusion, and low treatment cost of 1% of burn area.

  10. Large-area photogrammetry based testing of wind turbine blades

    Science.gov (United States)

    Poozesh, Peyman; Baqersad, Javad; Niezrecki, Christopher; Avitabile, Peter; Harvey, Eric; Yarala, Rahul

    2017-03-01

    An optically based sensing system that can measure the displacement and strain over essentially the entire area of a utility-scale blade leads to a measurement system that can significantly reduce the time and cost associated with traditional instrumentation. This paper evaluates the performance of conventional three dimensional digital image correlation (3D DIC) and three dimensional point tracking (3DPT) approaches over the surface of wind turbine blades and proposes a multi-camera measurement system using dynamic spatial data stitching. The potential advantages for the proposed approach include: (1) full-field measurement distributed over a very large area, (2) the elimination of time-consuming wiring and expensive sensors, and (3) the need for large-channel data acquisition systems. There are several challenges associated with extending the capability of a standard 3D DIC system to measure entire surface of utility scale blades to extract distributed strain, deflection, and modal parameters. This paper only tries to address some of the difficulties including: (1) assessing the accuracy of the 3D DIC system to measure full-field distributed strain and displacement over the large area, (2) understanding the geometrical constraints associated with a wind turbine testing facility (e.g. lighting, working distance, and speckle pattern size), (3) evaluating the performance of the dynamic stitching method to combine two different fields of view by extracting modal parameters from aligned point clouds, and (4) determining the feasibility of employing an output-only system identification to estimate modal parameters of a utility scale wind turbine blade from optically measured data. Within the current work, the results of an optical measurement (one stereo-vision system) performed on a large area over a 50-m utility-scale blade subjected to quasi-static and cyclic loading are presented. The blade certification and testing is typically performed using International

  11. Non-linear behaviour of large-area avalanche photodiodes

    CERN Document Server

    Fernandes, L M P; Monteiro, C M B; Santos, J M; Morgado, R E

    2002-01-01

    The characterisation of photodiodes used as photosensors requires a determination of the number of electron-hole pairs produced by scintillation light. One method involves comparing signals produced by X-ray absorptions occurring directly in the avalanche photodiode with the light signals. When the light is derived from light-emitting diodes in the 400-600 nm range, significant non-linear behaviour is reported. In the present work, we extend the study of the linear behaviour to large-area avalanche photodiodes, of Advanced Photonix, used as photosensors of the vacuum ultraviolet (VUV) scintillation light produced by argon (128 nm) and xenon (173 nm). We observed greater non-linearities in the avalanche photodiodes for the VUV scintillation light than reported previously for visible light, but considerably less than the non-linearities observed in other commercially available avalanche photodiodes.

  12. Large area single crystalline graphene growth on copper foil

    Science.gov (United States)

    Jung, Jaehyuck; Phan, Hoang Danh; Changgu, Lee; Graphene Engineering Lab Team

    Graphene synthesis methods using chemical vapor deposition (CVD) have been developed dramatically in these years but still it is challenging to make large size single crystal grains which have similar properties with pristine graphene. Here we report a pita-pocket method of growing large area single crystalline graphene on copper foil. We made holes on top of the closed copper pocket to provide stable gas flow inside of pocket, and copper domains with (111) crystal orientation, which gives an advantage for hexagonal graphene crystal growth, were formed continuously during synthesis. Liquid crystal analysis and electron backscatter diffraction (EBSD) were used to observe the copper crystallographic orientation. Also we compared with a traditional pocket method and an opened flat copper foil method. Graphene from the other methods had poly-crystalinity with different orientation in contrast to graphene from the hole-pocket method.

  13. Optical Distortion Evaluation in Large Area Windows using Interferometry

    Science.gov (United States)

    Youngquist, Robert C.; Skow, Miles; Nurge, Mark A.

    2015-01-01

    It is important that imagery seen through large area windows, such as those used on space vehicles, not be substantially distorted. Many approaches are described in the literature for measuring the distortion of an optical window, but most suffer from either poor resolution or processing difficulties. In this paper a new definition of distortion is presented, allowing accurate measurement using an optical interferometer. This new definition is shown to be equivalent to the definitions provided by the military and the standards organizations. In order to determine the advantages and disadvantages of this new approach the distortion of an acrylic window is measured using three different methods; image comparison, Moiré interferometry, and phase-shifting interferometry.

  14. Hysteresis in rf-driven large-area josephson junctions

    DEFF Research Database (Denmark)

    Olsen, O. H.; Samuelsen, Mogens Rugholm

    1986-01-01

    We have studied the effect of an applied rf signal on the radiation emitted from a large-area Josephson junction by means of a model based on the sine-Gordon equation. The rms value of the voltage of the emitted signal has been calculated and a hysteresis loop found. An analysis shows that the hy...... such as threshold value and level of the branch are predicted analytically....... that the hysteresis is due to the nonlinearity in the system, i.e., the dynamics of the lower branch can be described by a solution to the linearized system while the upper branch is described by a breather mode. These solutions are frequency locked to the driving signal. Various characteristics of the loop...

  15. Fermi Large Area Space Telescope Offline Software Maintenance Madness

    Science.gov (United States)

    Kelly, H.

    2011-07-01

    The Fermi Observatory, including the Large Area Telescope (LAT), was launched June 11, 2008. The LAT's offline software includes a detailed C++ Monte Carlo simulation built around Geant4 and the Gaudi framework, event by event reconstruction with ROOT output for use within the collaboration, and science tools utilizing FITS which are ultimately distributed to the user community. Within the LAT team, we support Redhat Linux, Windows, and are moving toward Mac OS. We support the use of Visual Studio as a development environment, while we use one build tool for our automated builds across all operating systems. We continue to rely upon nineteen external libraries including: ROOT, Gaudi, Swig, and Xerces. There have been a number of lessons learned, with undoubtedly more to come. This paper will focus on our experiences with our external libraries, maintenance of a large scale offline software project, and support of our developer and user communities.

  16. Large area MEMS based ultrasound device for cancer detection

    Energy Technology Data Exchange (ETDEWEB)

    Wodnicki, Robert, E-mail: wodnicki@research.ge.com [GE Global Research, 1 Research Circle, Niskayuna, NY 12309 (United States); Thomenius, Kai [GE Global Research, 1 Research Circle, Niskayuna, NY 12309 (United States); Ming Hooi, Fong; Sinha, Sumedha P.; Carson, Paul L. [Radiology and Biomedical Engineering, University of Michigan, Ann Arbor, MI 48109 (United States); Lin Dersong; Zhuang Xuefeng; Khuri-Yakub, Pierre [Department of Electrical Engineering, Stanford University, Stanford, CA 94309 (United States); Woychik, Charles [GE Global Research, 1 Research Circle, Niskayuna, NY 12309 (United States)

    2011-08-21

    We present image results obtained using a prototype ultrasound array that demonstrates the fundamental architecture for a large area MEMS based ultrasound device for detection of breast cancer. The prototype array consists of a tiling of capacitive Micromachined Ultrasound Transducers (cMUTs) that have been flip-chip attached to a rigid organic substrate. The pitch on the cMUT elements is 185 {mu}m and the operating frequency is nominally 9 MHz. The spatial resolution of the new probe is comparable to those of production PZT probes; however the sensitivity is reduced by conditions that should be correctable. Simulated opposed-view image registration and Speed of Sound volume reconstruction results for ultrasound in the mammographic geometry are also presented.

  17. Coating and Patterning Functional Materials for Large Area Electrofluidic Arrays

    Directory of Open Access Journals (Sweden)

    Hao Wu

    2016-08-01

    Full Text Available Industrialization of electrofluidic devices requires both high performance coating laminates and efficient material utilization on large area substrates. Here we show that screen printing can be effectively used to provide homogeneous pin-hole free patterned amorphous fluoropolymer dielectric layers to provide both the insulating and fluidic reversibility required for devices. Subsequently, we over-coat photoresist using slit coating on this normally extremely hydrophobic layer. In this way, we are able to pattern the photoresist by conventional lithography to provide the chemical contrast required for liquids dosing by self-assembly and highly-reversible electrofluidic switching. Materials, interfacial chemistry, and processing all contribute to the provision of the required engineered substrate properties. Coating homogeneity as characterized by metrology and device performance data are used to validate the methodology, which is well-suited for transfer to high volume production in existing LCD cell-making facilities.

  18. Complex protein nanopatterns over large areas via colloidal lithography

    DEFF Research Database (Denmark)

    Kristensen, Stine H; Pedersen, Gitte Albinus; Ogaki, Ryosuke

    2013-01-01

    The patterning of biomolecules at the nanoscale provides a powerful method to investigate cellular adhesion processes. A novel method for patterning is presented that is based on colloidal monolayer templating combined with multiple and angled deposition steps. Patterns of gold and SiO2 layers...... matrix proteins (vitronectin) or cellular ligands (the extracellular domain of E-cadherin) in the nanopatterns, whereas the selective poly(l-lysine)–poly(ethylene glycol) functionalization of the SiO2 matrix renders it protein repellent. Cell studies, as a proof of principle, demonstrate the potential...... are used to generate complex protein nanopatterns over large areas. Simple circular patches or more complex ring structures are produced in addition to hierarchical patterns of smaller patches. The gold regions are modified through alkanethiol chemistry, which enables the preparation of extracellular...

  19. Spatially explicit shallow landslide susceptibility mapping over large areas

    Science.gov (United States)

    Bellugi, Dino; Dietrich, William E.; Stock, Jonathan D.; McKean, Jim; Kazian, Brian; Hargrove, Paul

    2011-01-01

    Recent advances in downscaling climate model precipitation predictions now yield spatially explicit patterns of rainfall that could be used to estimate shallow landslide susceptibility over large areas. In California, the United States Geological Survey is exploring community emergency response to the possible effects of a very large simulated storm event and to do so it has generated downscaled precipitation maps for the storm. To predict the corresponding pattern of shallow landslide susceptibility across the state, we have used the model Shalstab (a coupled steady state runoff and infinite slope stability model) which susceptibility spatially explicit estimates of relative potential instability. Such slope stability models that include the effects of subsurface runoff on potentially destabilizing pore pressure evolution require water routing and hence the definition of upslope drainage area to each potential cell. To calculate drainage area efficiently over a large area we developed a parallel framework to scale-up Shalstab and specifically introduce a new efficient parallel drainage area algorithm which produces seamless results. The single seamless shallow landslide susceptibility map for all of California was accomplished in a short run time, and indicates that much larger areas can be efficiently modelled. As landslide maps generally over predict the extent of instability for any given storm. Local empirical data on the fraction of predicted unstable cells that failed for observed rainfall intensity can be used to specify the likely extent of hazard for a given storm. This suggests that campaigns to collect local precipitation data and detailed shallow landslide location maps after major storms could be used to calibrate models and improve their use in hazard assessment for individual storms.

  20. Building ISOC Status Displays for the Large AreaTelescope aboard the Gamma Ray Large Area Space Telescope (GLAST) Observatory

    Energy Technology Data Exchange (ETDEWEB)

    Ketchum, Christina; /SLAC

    2006-09-01

    In September 2007 the Gamma Ray Large Area Space Telescope (GLAST) is scheduled to launch aboard a Delta II rocket in order to put two high-energy gamma-ray detectors, the Large Area Telescope (LAT) and the GLAST Burst Monitor (GBM) into low earth orbit. The Instrument Science Operations Center (ISOC) at SLAC is responsible for the LAT operations for the duration of the mission, and will therefore build an operations center including a monitoring station at SLAC to inform operations staff and visitors of the status of the LAT instrument and GLAST. This monitoring station is to include sky maps showing the location of GLAST in its orbit as well as the LAT's projected field of view on the sky containing known gamma-ray sources. The display also requires a world map showing the locations of GLAST and three Tracking and Data Relay Satellites (TDRS) relative to the ground, their trail lines, and ''footprint'' circles indicating the range of communications for each satellite. The final display will also include a space view showing the orbiting and pointing information of GLAST and the TDRS satellites. In order to build the displays the astronomy programs Xephem, DS9, SatTrack, and STK were employed to model the position of GLAST and pointing information of the LAT instrument, and the programming utilities Python and Cron were used in Unix to obtain updated information from database and load them into the programs at regular intervals. Through these methods the indicated displays were created and combined to produce a monitoring display for the LAT and GLAST.

  1. Methods for Finding Legacy Wells in Large Areas

    Energy Technology Data Exchange (ETDEWEB)

    Hammack, Richard [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Veloski, Garret [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Hodges, D. Greg [Fugro Airborne Surveys, Mississauga, ON (Canada); White, Jr., Charles E. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States)

    2016-06-16

    More than 10 million wells have been drilled during 150 years of oil and gas production in the United States. When abandoned, many wells were not adequately sealed and now provide a potential conduit for the vertical movement of liquids and gases. Today, groundwater aquifers can be contaminated by surface pollutants flowing down wells or by deep, saline water diffusing upwards. Likewise, natural gas, carbon dioxide (CO2), or radon can travel upwards via these wells to endanger structures or human health on the surface. Recently, the need to find and plug wells has become critical with the advent of carbon dioxide injection into geologic formations for enhanced oil recovery (EOR) or carbon storage. The potential for natural gas or brine leakage through existing wells has also been raised as a concern in regions where shale resources are hydraulically fractured for hydrocarbon recovery. In this study, the National Energy Technology Laboratory (NETL) updated existing, effective well finding techniques to be able to survey large areas quickly using helicopter or ground-vehicle-mounted magnetometers, combined with mobile methane detection. For this study, magnetic data were collected using airborne and ground vehicles equipped with two boom-mounted magnetometers, or on foot using a hand-held magnetometer with a single sensor. Data processing techniques were employed to accentuate well-casing-type magnetic signatures. To locate wells with no magnetic signature (wells where the steel well casing had been removed), the team monitored for anomalous concentrations of methane, which could indicate migration of volatile compounds from deeper sedimentary strata along a well or fracture pathway. Methane measurements were obtained using the ALPIS DIfferential Absorption Lidar (DIAL) sensor for helicopter surveys and the Apogee leak detection system (LDS) for ground surveys. These methods were evaluated at a 100-year-old oilfield in Wyoming, where a helicopter magnetic

  2. Methods for Finding Legacy Wells in Large Areas

    Energy Technology Data Exchange (ETDEWEB)

    Hammack, Richard W. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Veloski, Garret A. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Hodges, D. Greg [Fugro Airborne Surveys, Mississauga, ON (Canada); White, Jr., Curt M. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States)

    2016-06-16

    United States. When abandoned, many wells were not adequately sealed and now provide a potential conduit for the vertical movement of liquids and gases. Today, groundwater aquifers can be contaminated by surface pollutants flowing down wells or by deep, saline water diffusing upwards. Likewise, natural gas, carbon dioxide (CO2), or radon can travel upwards via these wells to endanger structures or human health on the surface. Recently, the need to find and plug wells has become critical with the advent of carbon dioxide injection into geologic formations for enhanced oil recovery (EOR) or carbon storage. The potential for natural gas or brine leakage through existing wells has also been raised as a concern in regions where shale resources are hydraulically fractured for hydrocarbon recovery. In this study, the National Energy Technology Laboratory (NETL) updated existing, effective well finding techniques to be able to survey large areas quickly using helicopter or ground-vehicle-mounted magnetometers, combined with mobile methane detection. For this study, magnetic data were collected using airborne and ground vehicles equipped with two boom-mounted magnetometers, or on foot using a hand-held magnetometer with a single sensor. Data processing techniques were employed to accentuate well-casing-type magnetic signatures. To locate wells with no magnetic signature (wells where the steel well casing had been removed), the team monitored for anomalous concentrations of methane, which could indicate migration of volatile compounds from deeper sedimentary strata along a well or fracture pathway. Methane measurements were obtained using the ALPIS DIfferential Absorption Lidar (DIAL) sensor for helicopter surveys and the Apogee leak detection system (LDS) for ground surveys. These methods were evaluated at a 100-year-old oilfield in Wyoming, where a helicopter magnetic survey accurately located 93% of visible wells. In addition, 20% of the wells found by the survey were

  3. A Prototype Large Area Detector Module for Muon Scattering Tomography

    Energy Technology Data Exchange (ETDEWEB)

    Steer, C.A.; Boakes, J.; Burns, J.; Snow, S.; Stapleton, M.; Thompson, L.F.; Quillin, S. [AWE Aldermaston, Reading, Berkshire, RG7 4PR (United Kingdom)

    2015-07-01

    Abstract-Shielded special nuclear materials (SNM) are of concern as some fissile isotopes have low gamma and neutron emission rates. These materials are also easily shielded to the point where their passive emissions are comparable to background. Consequently, shielded SNM is very challenging for passive radiation detection portals which scan cargo containers. One potential solution for this is to utilise the natural cosmic ray muon background and examine how these muons scatter from materials inside the container volume, terms; the muon scattering tomography (MST) technique measures the three-dimensional localised scattering at all points within a cargo container, providing a degree of material discrimination. There is the additional benefit that the MST signal increases with the presence of more high density shielding materials, in contrast to passive radiation detection. Simulations and calculations suggest that the effectiveness of the technique is sensitive to the tracking accuracy amongst other parameters, motivating the need to develop practical detector systems that are capable of tracking cosmic ray muons. To this end, we have constructed and tested a 2 m by 2 m demonstration module based on gaseous drift chambers and triggered by a large area scintillator-based detector, which is readout by wavelength shifting fibres. We discuss its design, construction, characterisation and operational challenges. (authors)

  4. FERMI LARGE AREA TELESCOPE OBSERVATION OF SUPERNOVA REMNANT S147

    Energy Technology Data Exchange (ETDEWEB)

    Katsuta, J.; Uchiyama, Y.; Tanaka, T.; Tajima, H.; Bechtol, K.; Funk, S.; Lande, J. [W. W. Hansen Experimental Physics Laboratory, Kavli Institute for Particle Astrophysics and Cosmology, Department of Physics and SLAC National Accelerator Laboratory, Stanford University, Stanford, CA 94305 (United States); Ballet, J. [Laboratoire AIM, CEA-IRFU/CNRS/Universite Paris Diderot, Service d' Astrophysique, CEA Saclay, 91191 Gif sur Yvette (France); Hanabata, Y. [Department of Physical Sciences, Hiroshima University, Higashi-Hiroshima, Hiroshima 739-8526 (Japan); Lemoine-Goumard, M. [Universite Bordeaux 1, CNRS/IN2p3, Centre d' Etudes Nucleaires de Bordeaux Gradignan, 33175 Gradignan (France); Takahashi, T., E-mail: katsuta@slac.stanford.edu, E-mail: uchiyama@slac.stanford.edu [Institute of Space and Astronautical Science, Japanese Aerospace Exploration Agency, 3-1-1 Yoshinodai, Chuo-ku, Sagamihara, Kanagawa 252-5210 (Japan)

    2012-06-20

    We present an analysis of gamma-ray data obtained with the Large Area Telescope on board the Fermi Gamma-ray Space Telescope in the region around supernova remnant (SNR) S147 (G180.0-1.7). A spatially extended gamma-ray source detected in an energy range of 0.2-10 GeV is found to coincide with SNR S147. We confirm its spatial extension at >5{sigma} confidence level. The gamma-ray flux is (3.8 {+-} 0.6) Multiplication-Sign 10{sup -8} photons cm{sup -2} s{sup -1}, corresponding to a luminosity of 1.3 Multiplication-Sign 10{sup 34} (d/1.3 kpc){sup 2} erg s{sup -1} in this energy range. The gamma-ray emission exhibits a possible spatial correlation with the prominent H{alpha} filaments of SNR S147. There is no indication that the gamma-ray emission comes from the associated pulsar PSR J0538+2817. The gamma-ray spectrum integrated over the remnant is likely dominated by the decay of neutral {pi} mesons produced through the proton-proton collisions in the filaments. The reacceleration of the pre-existing cosmic rays and subsequent adiabatic compression in the filaments is sufficient to provide the energy density required of high-energy protons.

  5. Background simulations for the Large Area Detector onboard LOFT

    DEFF Research Database (Denmark)

    Campana, Riccardo; Feroci, Marco; Ettore, Del Monte

    2013-01-01

    and magnetic fields around compact objects and in supranuclear density conditions. Having an effective area of similar to 10 m(2) at 8 keV, LOFT will be able to measure with high sensitivity very fast variability in the X-ray fluxes and spectra. A good knowledge of the in-orbit background environment...... is essential to assess the scientific performance of the mission and optimize the design of its main instrument, the Large Area Detector (LAD). In this paper the results of an extensive Geant-4 simulation of the instrumentwillbe discussed, showing the main contributions to the background and the design...... solutions for its reduction and control. Our results show that the current LOFT/LAD design is expected to meet its scientific requirement of a background rate equivalent to 10 mCrab in 2aEuro'30 keV, achieving about 5 mCrab in the most important 2-10 keV energy band. Moreover, simulations show...

  6. Ultraflexible, large-area, physiological temperature sensors for multipoint measurements.

    Science.gov (United States)

    Yokota, Tomoyuki; Inoue, Yusuke; Terakawa, Yuki; Reeder, Jonathan; Kaltenbrunner, Martin; Ware, Taylor; Yang, Kejia; Mabuchi, Kunihiko; Murakawa, Tomohiro; Sekino, Masaki; Voit, Walter; Sekitani, Tsuyoshi; Someya, Takao

    2015-11-24

    We report a fabrication method for flexible and printable thermal sensors based on composites of semicrystalline acrylate polymers and graphite with a high sensitivity of 20 mK and a high-speed response time of less than 100 ms. These devices exhibit large resistance changes near body temperature under physiological conditions with high repeatability (1,800 times). Device performance is largely unaffected by bending to radii below 700 µm, which allows for conformal application to the surface of living tissue. The sensing temperature can be tuned between 25 °C and 50 °C, which covers all relevant physiological temperatures. Furthermore, we demonstrate flexible active-matrix thermal sensors which can resolve spatial temperature gradients over a large area. With this flexible ultrasensitive temperature sensor we succeeded in the in vivo measurement of cyclic temperatures changes of 0.1 °C in a rat lung during breathing, without interference from constant tissue motion. This result conclusively shows that the lung of a warm-blooded animal maintains surprising temperature stability despite the large difference between core temperature and inhaled air temperature.

  7. Large area forest inventory using Landsat ETM+: A geostatistical approach

    Science.gov (United States)

    Meng, Qingmin; Cieszewski, Chris; Madden, Marguerite

    Large area forest inventory is important for understanding and managing forest resources and ecosystems. Remote sensing, the Global Positioning System (GPS), and geographic information systems (GIS) provide new opportunities for forest inventory. This paper develops a new systematic geostatistical approach for predicting forest parameters, using integrated Landsat 7 Enhanced Thematic Mapper Plus (ETM+) images, GPS, and GIS. Forest parameters, such as basal area, height, health conditions, biomass, or carbon, can be incorporated as a response variable, and the geostatistical approach can be used to predict parameter values for uninventoried points. Using basal area as the response and Landsat ETM+ images of pine stands in Georgia as auxiliary data, this approach includes univariate kriging (ordinary kriging and universal kriging) and multivariable kriging (co-kriging and regression kriging). The combination of bands 4, 3, and 2, as well as the combination of bands 5, 4, and 3, normalized difference vegetation index (NDVI), and principal components (PCs) were used in this study with co-kriging and regression kriging. Validation based on 200 randomly sampling points withheld field inventory was computed to evaluate the kriging performance and demonstrated that band combination 543 performed better than band combination 432, NDVI, and PCs. Regression kriging resulted in the smallest errors and the highest R-squared indicating the best geostatistical method for spatial predictions of pine basal area.

  8. Large area metalenses: design, characterization, and mass manufacturing

    Science.gov (United States)

    She, Alan; Zhang, Shuyan; Shian, Samuel; Clarke, David R.; Capasso, Federico

    2018-01-01

    Optical components, such as lenses, have traditionally been made in the bulk form by shaping glass or other transparent materials. Recent advances in metasurfaces provide a new basis for recasting optical components into thin, planar elements, having similar or better performance using arrays of subwavelength-spaced optical phase-shifters. The technology required to mass produce them dates back to the mid-1990s, when the feature sizes of semiconductor manufacturing became considerably denser than the wavelength of light, advancing in stride with Moore's law. This provides the possibility of unifying two industries: semiconductor manufacturing and lens-making, whereby the same technology used to make computer chips is used to make optical components, such as lenses, based on metasurfaces. Using a scalable metasurface layout compression algorithm that exponentially reduces design file sizes (by 3 orders of magnitude for a centimeter diameter lens) and stepper photolithography, we show the design and fabrication of metasurface lenses (metalenses) with extremely large areas, up to centimeters in diameter and beyond. Using a single two-centimeter diameter near-infrared metalens less than a micron thick fabricated in this way, we experimentally implement the ideal thin lens equation, while demonstrating high-quality imaging and diffraction-limited focusing.

  9. Searches for Dark Matter with the Fermi Large Area Telescope

    CERN Multimedia

    CERN. Geneva

    2016-01-01

    The nature of dark matter is a longstanding enigma of physics; it may consist of particles beyond the Standard Model that are still elusive to experiments. Among indirect search techniques, which look for stable products from the annihilation or decay of dark matter particles, or from axions coupling to high-energy photons, observations of the gamma-ray sky have come to prominence over the last few years, because of the excellent sensitivity and full-sky coverage of the Large Area Telescope (LAT) on the Fermi Gamma-ray Space Telescope mission. The LAT energy range from 20 MeV to above 300 GeV is particularly well suited for searching for products of the interactions of dark matter particles. In this talk I will describe targets studied for evidence of dark matter with the LAT, and review the status of searches performed with up to six years of LAT data. I will also discuss the factors that determine the sensitivities of these searches, including the magnitudes of the signals and the relevant backgrounds, c...

  10. Control: the effects of ISO

    NARCIS (Netherlands)

    Laura Ilzarbe; PhD Everard van Kemenade; Maria-Jezus Alvarez

    2007-01-01

    De effecten van ISO-certificering zoals gerapporteerd in wetenschappelijk onderzoek. Met speciale aandacht voor de resultaten in het onderwijs. ISO 9000:2000 doet het nadrukkelijk beter dan haar vorige versies.

  11. ATTRIBUTION AND CHARACTERISATION OF SCLEROPHYLL FORESTED LANDSCAPES OVER LARGE AREAS

    Directory of Open Access Journals (Sweden)

    S. Jones

    2016-06-01

    Full Text Available This paper presents a methodology for the attribution and characterisation of Sclerophyll forested landscapes over large areas. First we define a set of woody vegetation data primitives (e.g. canopy cover, leaf area index (LAI, bole density, canopy height, which are then scaled-up using multiple remote sensing data sources to characterise and extract landscape woody vegetation features. The advantage of this approach is that vegetation landscape features can be described from composites of these data primitives. The proposed data primitives act as building blocks for the re-creation of past woody characterisation schemes as well as allowing for re-compilation to support present and future policy and management and decision making needs. Three main research sites were attributed; representative of different sclerophyll woody vegetated systems (Box Iron-bark forest; Mountain Ash forest; Mixed Species foothills forest. High resolution hyperspectral and full waveform LiDAR data was acquired over the three research sites. At the same time, land management agencies (Victorian Department of Environment, Land Water and Planning and researchers (RMIT, CRC for Spatial Information and CSIRO conducted fieldwork to collect structural and functional measurements of vegetation, using traditional forest mensuration transects and plots, terrestrial lidar scanning and high temporal resolution in-situ autonomous laser (VegNet scanners. Results are presented of: 1 inter-comparisons of LAI estimations made using ground based hemispherical photography, LAI 2200 PCA, CI-110 and terrestrial and airborne laser scanners; 2 canopy height and vertical canopy complexity derived from airborne LiDAR validated using ground observations; and, 3 time-series characterisation of land cover features. 1. Accuracy targets for remotely sensed LAI products to match within ground based estimates are ± 0.5 LAI or a 20% maximum (CEOS/GCOS with new aspirational targets of 5%. In this

  12. Attribution and Characterisation of Sclerophyll Forested Landscapes Over Large Areas

    Science.gov (United States)

    Jones, Simon; Soto-Berelov, Mariela; Suarez, Lola; Wilkes, Phil; Woodgate, Will; Haywood, Andrew

    2016-06-01

    This paper presents a methodology for the attribution and characterisation of Sclerophyll forested landscapes over large areas. First we define a set of woody vegetation data primitives (e.g. canopy cover, leaf area index (LAI), bole density, canopy height), which are then scaled-up using multiple remote sensing data sources to characterise and extract landscape woody vegetation features. The advantage of this approach is that vegetation landscape features can be described from composites of these data primitives. The proposed data primitives act as building blocks for the re-creation of past woody characterisation schemes as well as allowing for re-compilation to support present and future policy and management and decision making needs. Three main research sites were attributed; representative of different sclerophyll woody vegetated systems (Box Iron-bark forest; Mountain Ash forest; Mixed Species foothills forest). High resolution hyperspectral and full waveform LiDAR data was acquired over the three research sites. At the same time, land management agencies (Victorian Department of Environment, Land Water and Planning) and researchers (RMIT, CRC for Spatial Information and CSIRO) conducted fieldwork to collect structural and functional measurements of vegetation, using traditional forest mensuration transects and plots, terrestrial lidar scanning and high temporal resolution in-situ autonomous laser (VegNet) scanners. Results are presented of: 1) inter-comparisons of LAI estimations made using ground based hemispherical photography, LAI 2200 PCA, CI-110 and terrestrial and airborne laser scanners; 2) canopy height and vertical canopy complexity derived from airborne LiDAR validated using ground observations; and, 3) time-series characterisation of land cover features. 1. Accuracy targets for remotely sensed LAI products to match within ground based estimates are ± 0.5 LAI or a 20% maximum (CEOS/GCOS) with new aspirational targets of 5%). In this research we

  13. Large-area field emission diode for semiconductor annealing

    Science.gov (United States)

    Luches, A.; Nassisi, V.; Perrone, A.; Perrone, M. R.

    1981-03-01

    We report the characteristics of a low energy electron beam generator used for annealing of materials of interest as electron devices and photovoltaic cells. The high voltage pulser is a two-stage Marx circuit which supplies 10-50 kV pulses. A Blumlein line gives the pulses an almost square shape and a length of 50 ns. This short pulse is applied to a field emission diode. Various kinds of cathodes are used. They deliver electron pulses of up to 20 kA. Tungsten needles are used for small-area beams and blade arrays or graphite cathodes for large-area beams. Consequently, the beam diameter can vary from 2 to 120 mm with a good beam homogeneity. The anode is movable to vary the vacuum diode impedance and consequently the current-voltage characteristic of the electron beam. Energy densities varying from 0.1 to 100 J/cm 2 are obtained on the anode. The anode can be formed by a semiconductor monocrystalline wafer. We used crystalline silicon wafers covered by a thin (≈100 nm) layer of vacuum deposited near-noble and refractory metals. Under electron beam bombardment with discharge energy densities ranging from 0.4 to 10 J/cm 2, silicide formation is evident over all the annealed anodes. Metastable compounds are formed because of the fast heating and cooling rates. Silicon monocrystalline wafers, doped with 10 14-10 15 ions/cm 2 of B or P ions exhibit a complete recovery of their crystalline structure after a single discharge.

  14. Llamas: Large-area microphone arrays and sensing systems

    Science.gov (United States)

    Sanz-Robinson, Josue

    Large-area electronics (LAE) provides a platform to build sensing systems, based on distributing large numbers of densely spaced sensors over a physically-expansive space. Due to their flexible, "wallpaper-like" form factor, these systems can be seamlessly deployed in everyday spaces. They go beyond just supplying sensor readings, but rather they aim to transform the wealth of data from these sensors into actionable inferences about our physical environment. This requires vertically integrated systems that span the entirety of the signal processing chain, including transducers and devices, circuits, and signal processing algorithms. To this end we develop hybrid LAE / CMOS systems, which exploit the complementary strengths of LAE, enabling spatially distributed sensors, and CMOS ICs, providing computational capacity for signal processing. To explore the development of hybrid sensing systems, based on vertical integration across the signal processing chain, we focus on two main drivers: (1) thin-film diodes, and (2) microphone arrays for blind source separation: 1) Thin-film diodes are a key building block for many applications, such as RFID tags or power transfer over non-contact inductive links, which require rectifiers for AC-to-DC conversion. We developed hybrid amorphous / nanocrystalline silicon diodes, which are fabricated at low temperatures (circuit level we developed localized a-Si TFT amplifiers, and a custom CMOS IC, for system control, sensor readout and digitization. On a signal processing level we developed an algorithm for blind source separation in a real, reverberant room, based on beamforming and binary masking. It requires no knowledge about the location of the speakers or microphones. Instead, it uses cluster analysis techniques to determine the time delays for beamforming; thus, adapting to the unique acoustic environment of the room.

  15. LEAP - A Large Area GRB Polarimeter for the ISS

    Science.gov (United States)

    McConnell, Mark L.; Baring, Matthew G.; Bloser, Peter F.; Briggs, Michael Stephen; Connaughton, Valerie; Dwyer, Joseph; Gaskin, Jessica; Grove, J. Eric; Gunji, Shuichi; Hartmann, Dieter; Hayashida, Kiyoshi; Hill, Joanne E.; Kippen, R. Marc; Kishimoto, Shunji; Kishimoto, Yuji; Krizmanic, John F.; Lundman, Christoffer; Mattingly, David; McBreen, Sheila; Meegan, Charles A.; Mihara, Tatehiro; Nakamori, Takeshi; Pearce, Mark; Phlips, Bernard; Preece, Robert D.; Produit, Nicolas; Ryan, James M.; Ryde, Felix; Sakamoto, Takanori; Strickman, Mark Samuel; Sturner, Steven J.; Takahashi, Hiromitsu; Toma, Kenji; Vestrand, W. Thomas; Wilson-Hodge, Colleen A.; yatsu, Yoichi; Yonetoku, Daisuke; Zhang, Bing

    2017-08-01

    The LargE Area burst Polarimeter (LEAP) is a mission concept for a wide FOV Compton scatter polarimeter instrument that would be mounted as an external payload on the International Space Station (ISS) in 2022. It has recently been proposed as an astrophysics Mission of Opportunity (MoO), with the primary objective of measuring polarization of the prompt emission of Gamma Ray Bursts (GRBs). It will achieve its science objectives with a simple mission design that features a single instrument based entirely on well-established, flight-proven scintillator-photomultiplier tube (PMT) technologies. LEAP will provide GRB polarization measurements from 30-500 keV and GRB spectroscopy from 5 keV up to 5 MeV, and will self-sufficiently provide the source localization that is required for analysis of the polarization data. The instrument consists of 9 independent polarimeter modules and associated electronics. Each module is a 12 x 12 array of independent plastic and CsI(Tl) scintillator elements, each with individual PMT readout, to identify and measure Compton scatter events. It will provide coverage of GRB spectra over a range that includes most values of Ep. With a total geometric scintillator area of 5000 cm2, LEAP will provide a total effective area for polarization (double scatter) events of ~500 cm2. LEAP will trigger on >200 GRBs within its FOV during a two-year mission. At least 120 GRBs will have sufficient counts to enable localization with an error of 50%, as suggested by published results, LEAP will provide definitive polarization measurements on ~100 GRBs. These data will allow LEAP to differentiate between the intrinsic and geometric classes of GRB models and further distinguish between two geometric models at the 95% confidence level. Detailed time-resolved and/or energy-resolved studies will be conducted for the brightest GRBs.

  16. Large-area settlement pattern recognition from Landsat-8 data

    Science.gov (United States)

    Wieland, Marc; Pittore, Massimiliano

    2016-09-01

    The study presents an image processing and analysis pipeline that combines object-based image analysis with a Support Vector Machine to derive a multi-layered settlement product from Landsat-8 data over large areas. 43 image scenes are processed over large parts of Central Asia (Southern Kazakhstan, Kyrgyzstan, Tajikistan and Eastern Uzbekistan). The main tasks tackled by this work include built-up area identification, settlement type classification and urban structure types pattern recognition. Besides commonly used accuracy assessments of the resulting map products, thorough performance evaluations are carried out under varying conditions to tune algorithm parameters and assess their applicability for the given tasks. As part of this, several research questions are being addressed. In particular the influence of the improved spatial and spectral resolution of Landsat-8 on the SVM performance to identify built-up areas and urban structure types are evaluated. Also the influence of an extended feature space including digital elevation model features is tested for mountainous regions. Moreover, the spatial distribution of classification uncertainties is analyzed and compared to the heterogeneity of the building stock within the computational unit of the segments. The study concludes that the information content of Landsat-8 images is sufficient for the tested classification tasks and even detailed urban structures could be extracted with satisfying accuracy. Freely available ancillary settlement point location data could further improve the built-up area classification. Digital elevation features and pan-sharpening could, however, not significantly improve the classification results. The study highlights the importance of dynamically tuned classifier parameters, and underlines the use of Shannon entropy computed from the soft answers of the SVM as a valid measure of the spatial distribution of classification uncertainties.

  17. Fermi Large Area Telescope Observations of Misaligned Active Galactic Nuclei

    Science.gov (United States)

    Abdo, A. A.; Ackermann, M.; Ajello, M.; Baldini, L.; Ballet, J.; Barbiellini, G.; Bastieri, D.; Bechtol, K.; Bellazzini, R.; Berenji, B.; Blandford, R. D.; Bloom, E. D.; Bonamente, E.; Borgland, A. W.; Bouvier, A.; Brandt, T. J.; Bregeon, J.; Brez, A.; Brigida, M.; Bruel, P.; Buehler, R.; Burnett, T. H.; Buson, S.; Caliandro, G. A.; Cameron, R. A.; Cannon, A.; Caraveo, P. A.; Carrigan, S.; Casandjian, J. M.; Cavazzuti, E.; Cecchi, C.; Çelik, Ö.; Celotti, A.; Charles, E.; Chekhtman, A.; Chen, A. W.; Cheung, C. C.; Chiang, J.; Ciprini, S.; Claus, R.; Cohen-Tanugi, J.; Colafrancesco, S.; Conrad, J.; Davis, D. S.; Dermer, C. D.; de Angelis, A.; de Palma, F.; Silva, E. do Couto e.; Drell, P. S.; Dubois, R.; Favuzzi, C.; Fegan, S. J.; Ferrara, E. C.; Fortin, P.; Frailis, M.; Fukazawa, Y.; Fusco, P.; Gargano, F.; Gasparrini, D.; Gehrels, N.; Germani, S.; Giglietto, N.; Giommi, P.; Giordano, F.; Giroletti, M.; Glanzman, T.; Godfrey, G.; Grandi, P.; Grenier, I. A.; Grove, J. E.; Guillemot, L.; Guiriec, S.; Hadasch, D.; Hayashida, M.; Hays, E.; Horan, D.; Hughes, R. E.; Jackson, M. S.; Jóhannesson, G.; Johnson, A. S.; Johnson, W. N.; Kamae, T.; Katagiri, H.; Kataoka, J.; Knödlseder, J.; Kuss, M.; Lande, J.; Latronico, L.; Lee, S.-H.; Lemoine-Goumard, M.; Llena Garde, M.; Longo, F.; Loparco, F.; Lott, B.; Lovellette, M. N.; Lubrano, P.; Madejski, G. M.; Makeev, A.; Malaguti, G.; Mazziotta, M. N.; McConville, W.; McEnery, J. E.; Michelson, P. F.; Migliori, G.; Mitthumsiri, W.; Mizuno, T.; Monte, C.; Monzani, M. E.; Morselli, A.; Moskalenko, I. V.; Murgia, S.; Naumann-Godo, M.; Nestoras, I.; Nolan, P. L.; Norris, J. P.; Nuss, E.; Ohsugi, T.; Okumura, A.; Omodei, N.; Orlando, E.; Ormes, J. F.; Paneque, D.; Panetta, J. H.; Parent, D.; Pelassa, V.; Pepe, M.; Persic, M.; Pesce-Rollins, M.; Piron, F.; Porter, T. A.; Rainò, S.; Rando, R.; Razzano, M.; Razzaque, S.; Reimer, A.; Reimer, O.; Reyes, L. C.; Roth, M.; Sadrozinski, H. F.-W.; Sanchez, D.; Sander, A.; Scargle, J. D.; Sgrò, C.; Siskind, E. J.; Smith, P. D.; Spandre, G.; Spinelli, P.; Stawarz, Ł.; Stecker, F. W.; Strickman, M. S.; Suson, D. J.; Takahashi, H.; Tanaka, T.; Thayer, J. B.; Thayer, J. G.; Thompson, D. J.; Tibaldo, L.; Torres, D. F.; Torresi, E.; Tosti, G.; Tramacere, A.; Uchiyama, Y.; Usher, T. L.; Vandenbroucke, J.; Vasileiou, V.; Vilchez, N.; Villata, M.; Vitale, V.; Waite, A. P.; Wang, P.; Winer, B. L.; Wood, K. S.; Yang, Z.; Ylinen, T.; Ziegler, M.

    2010-09-01

    Analysis is presented for 15 months of data taken with the Large Area Telescope (LAT) on the Fermi Gamma-ray Space Telescope for 11 non-blazar active galactic nuclei (AGNs), including seven FRI radio galaxies and four FRII radio sources consisting of two FRII radio galaxies and two steep spectrum radio quasars. The broad line FRI radio galaxy 3C 120 is reported here as a γ-ray source for the first time. The analysis is based on directional associations of LAT sources with radio sources in the 3CR, 3CRR, and MS4 (collectively referred to as 3C-MS) catalogs. Seven of the eleven LAT sources associated with 3C-MS radio sources have spectral indices larger than 2.3 and, except for the FRI radio galaxy NGC 1275 that shows possible spectral curvature, are well described by a power law. No evidence for time variability is found for any sources other than NGC 1275. The γ-ray luminosities of FRI radio galaxies are significantly smaller than those of the BL Lac objects detected by the LAT, whereas the γ-ray luminosities of the FRII sources are quite similar to those of FSRQs, which could reflect different beaming factors for the γ-ray emission. A core dominance (CD) study of the 3CRR sample indicates that sources closer to the jet axis are preferentially detected with the Fermi LAT, insofar as the γ-ray-detected misaligned AGNs have larger CD at a given average radio flux. The results are discussed in view of the AGN unification scenario.

  18. Accreditation - ISO/IEC 17025

    Science.gov (United States)

    Kaus, Rüdiger

    This chapter gives the background on the accreditation of testing and calibration laboratories according to ISO/IEC 17025 and sets out the requirements of this international standard. ISO 15189 describes similar requirements especially tailored for medical laboratories. Because of these similarities ISO 15189 is not separately mentioned throughout this lecture.

  19. Exploring Milkyway Halo Substructures with Large-Area Sky Surveys

    Energy Technology Data Exchange (ETDEWEB)

    Li, Ting [Texas A & M Univ., College Station, TX (United States)

    2016-01-01

    Over the last two decades, our understanding of the Milky Way has been improved thanks to large data sets arising from large-area digital sky surveys. The stellar halo is now known to be inhabited by a variety of spatial and kinematic stellar substructures, including stellar streams and stellar clouds, all of which are predicted by hierarchical Lambda Cold Dark Matter models of galaxy formation. In this dissertation, we first present the analysis of spectroscopic observations of individual stars from the two candidate structures discovered using an M-giant catalog from the Two Micron All-Sky Survey. The follow-up observations show that one of the candidates is a genuine structure which might be associated with the Galactic Anticenter Stellar Structure, while the other one is a false detection due to the systematic photometric errors in the survey or dust extinction in low Galactic latitudes. We then presented the discovery of an excess of main sequence turn-off stars in the direction of the constellations of Eridanus and Phoenix from the first-year data of the Dark Energy Survey (DES) – a five-year, 5,000 deg2 optical imaging survey in the Southern Hemisphere. The Eridanus-Phoenix (EriPhe) overdensity is centered around l ~ 285° and b ~ -60° and the Poisson significance of the detection is at least 9σ. The EriPhe overdensity has a cloud-like morphology and the extent is at least ~ 4 kpc by ~ 3 kpc in projection, with a heliocentric distance of about d ~ 16 kpc. The EriPhe overdensity is morphologically similar to the previously-discovered Virgo overdensity and Hercules-Aquila cloud. These three overdensities lie along a polar plane separated by ~ 120° and may share a common origin. In addition to the scientific discoveries, we also present the work to improve the photometric calibration in DES using auxiliary calibration systems, since the photometric errors can cause false detection in first the halo substructure. We present a detailed description of the two

  20. ISO CD 14492

    DEFF Research Database (Denmark)

    Martins, Bo; Kossentini, F.; Arps, R.

    1998-01-01

    This Recommendation | International Standard, informally called JBIG2, defines a coding method for bilevel images, that is, images consisting of a single rectangular bit plane, with each pixel taking on one of just two possible colors. Itis being drafted by the Joint Bi-level Image Experts Group ...... (JBIG), a "Collaborative team" that reports both to ISO/IEC JTC1/SC29/WG1 and to ITU-T/SG8....

  1. U-value measurements on ISO round Robin window

    DEFF Research Database (Denmark)

    Duer, Karsten

    1997-01-01

    9 laboratories in 6 european and 2 north american countries have participated in a round robin U-value test of a standard facade window. The objective of the round robin test was to verify that the ISO/CEN proposals for U-value measurement standard is robust.......9 laboratories in 6 european and 2 north american countries have participated in a round robin U-value test of a standard facade window. The objective of the round robin test was to verify that the ISO/CEN proposals for U-value measurement standard is robust....

  2. A Cross-Country Empirical Study Towards the Impact of Following ISO Management System Standards on Euro-Area Economic Confidence

    Directory of Open Access Journals (Sweden)

    Ştefan Daniel Armeanu

    2017-02-01

    Full Text Available This study aims to examine the impact of following ISO management system standards on economic sentiment indicator (ESI as proxy of economic agents’ general view concerning economic activity, for 21 European Union member states over 2005-2014. The empirical research comprises ISO standards with reference to management systems towards quality (ISO 9001, ISO 13485, ISO 16949, food safety (ISO 22000, environment (ISO 14001, and information security (ISO 27001. Panel data fixed effects regression models provide support for a positive impact of the quality management systems related to automotive industry, as well as information security management systems, on the ESI. Further, dynamic panel data approach by way of two-step system generalized method of moments emphasizes a positive influence of quality management systems standard for the medical device industry on Euro-area economic confidence, but a negative effect of food safety management systems. Also, ISO 9001, ISO 22000, and ISO 14001 Granger cause ESI.

  3. DETERMINATION OF AIR EXCHANGE IN PUBLIC BUILDING PREMISES HAVING LARGE AREA OF TRANSLUCENT STRUCTURES

    Directory of Open Access Journals (Sweden)

    L. V. Borukhava

    2017-01-01

    Full Text Available The paper considers reasons of internal air parameter mismatch in warm season of the year for public building premises having large area of translucent structures. The main reason of uncomfortable air environment is an underestimated value of air supply volume due to air exchange calculation according to multiplicity factor or air exchange rate per one person which are determinative values only for cold period and transient conditions. In other words multiplicity factor and air exchange rate do not take into account equipment abundance in modern offices and heat input of the office equipment is rather significant value. The paper contains an analysis and comparison of the existing air exchange rates for the Republic of Belarus, Russian Federation, European countries and USA. Calculation of heat input and air exchange for public building premises during warm season of the year for assimilation of evident heat excess has been made at various orientations of curtain walls. The paper provides structure of heat input into premises. The required rate of air supply volume per one person has been determined on the basis of air exchange and it has been compared with the existing air exchange rate. The required rate averagely exceeds the standard one by 12-fold. But this does not mean that there is necessity to increase the rate in such a way because it entails an increase in capital and operational costs. In this connection the paper reviews variants for improvement of micro-climate in the building premises with large area of translucent structures: automatic regulation of heat transfer in heating appliances during cold period of the year; usage of air conditioning and increase in temperature difference of input and output air during warm period.

  4. Design of a backlighting structure for very large-area luminaries

    Science.gov (United States)

    Carraro, L.; Mäyrä, A.; Simonetta, M.; Benetti, G.; Tramonte, A.; Benedetti, M.; Randone, E. M.; Ylisaukko-Oja, A.; Keränen, K.; Facchinetti, T.; Giuliani, G.

    2017-02-01

    A novel approach for RGB semiconductor LED-based backlighting system is developed to satisfy the requirements of the Project LUMENTILE funded by the European Commission, whose scope is to develop a luminous electronic tile that is foreseen to be manufactured in millions of square meters each year. This unconventionally large-area surface of uniform, high-brightness illumination requires a specific optical design to keep a low production cost, while maintaining high optical extraction efficiency and a reduced thickness of the structure, as imposed by architectural design constraints. The proposed solution is based on a light-guiding layer to be illuminated by LEDs in edge configuration, or in a planar arrangement. The light guiding slab is finished with a reflective top interface and a diffusive or reflective bottom interface/layer. Patterning is used for both the top interface (punctual removal of reflection and generation of a light scattering centers) and for the bottom layer (using dark/bright printed pattern). Computer-based optimization algorithms based on ray-tracing are used to find optimal solutions in terms of uniformity of illumination of the top surface and overall light extraction efficiency. Through a closed-loop optimization process, that assesses the illumination uniformity of the top surface, the algorithm generates the desired optimized top and bottom patterns, depending on the number of LED sources used, their geometry, and the thickness of the guiding layer. Specific low-cost technologies to realize the patterning are discussed, with the goal of keeping the production cost of these very large-area luminaries below the value of 100$/sqm.

  5. ISO 21500 AND PMBOK COMPARISON

    OpenAIRE

    Dotsenko A.V.

    2013-01-01

    On 31st December 2012, the Project Management Institute (PMI) published the 5th edition of the Project Management Body of Knowledge (PMBoK) Guide. A few months earlier, the International Organization for Standardization (ISO) published a new standard, ISO 21500:2012, Guidance on Project Management. The two releases of the PMBoK Guide and ISO 21500 standard are very close. Detailed review of the differences and similarities between them are compiled.

  6. ISO 9000 Quality Management System

    Science.gov (United States)

    Hadjicostas, Evsevios

    The ISO 9000 series describes a quality management system applicable to any organization. In this chapter we present the requirements of the standard in a way that is as close as possible to the needs of analytical laboratories. The sequence of the requirements follows that in the ISO 9001:2008 standard. In addition, the guidelines for performance improvement set out in the ISO 9004 are reviewed. Both standards should be used as a reference as well as the basis for further elaboration.

  7. ISO 50001 Energy Management Standard

    Energy Technology Data Exchange (ETDEWEB)

    None

    2013-08-12

    This powerful standard from the International Organization for Standardization (ISO) provides an internationally recognized framework for organizations to voluntarily implement an energy management system.

  8. ISO 19152 : 2012, Land Administration Domain Model published by ISO

    NARCIS (Netherlands)

    Van Oosterom, P.; Lemmen, C.; Uitermark, H.

    2013-01-01

    This paper describes the last developments of the Land Administration Domain Model (LADM). The Final Draft International Standard, ISO FDIS 19152, unanimously passed on 1 November 2012 the final vote towards becoming an International Standard (IS). After technical editing by ISO secretariat in

  9. ISO 9000 and the total quality management models

    OpenAIRE

    Pacios Lozano, Ana Reyes

    1997-01-01

    Establishes the most outstanding differences between the ISO 9000 norms and total quality management as forms or manners of managing quality used in some information services. Compares two models of total quality: European Foundation far Quality Management and Malcolm Baldrige Awards.

  10. Quality Assurance through ISO 9000.

    Science.gov (United States)

    Zuckerman, Amy

    2000-01-01

    Created in 1987 by the International Organization for Standardization, in Geneva, Switzerland, ISO 9000 is attempting to develop a world standard to help companies and other institutions measure and monitor their quality-control efforts. This article describes four school districts' successful efforts to secure ISO 9000 certification. (MLH)

  11. ISO 9000: The Librarian's Role.

    Science.gov (United States)

    Dobson, Chris; Ernst, Carolyn

    1999-01-01

    Describes the special library's role in implementing ISO 9000 (i.e., a series of international quality-assurance standards developed by the International Organization of Standards). Topics discussed include document and data control, keeping the standards current, documentation of procedures, the ISO 9000 audit, and benefits for the library. (MES)

  12. ISO 9001 certification for hospitals in Bulgaria: does it help service?

    Science.gov (United States)

    Stoimenova, Assena; Stoilova, Ani; Petrova, Guenka

    2014-03-04

    The aim of our study is to review the published literature on establishment and implementation of ISO 9001 QMS in European hospitals, to study the availability of International Organization for Standardization (ISO) quality management systems (QMS) in Bulgarian hospitals and to outline the main advantages of ISO implementation in the hospitals in Bulgaria. The information on availability of ISO QMS in the hospitals in Bulgaria was gathered via Bulgarian certification register, the registries of various quality associations, websites of hospitals and certification companies presented in Bulgaria. A total number of 312 hospitals in Bulgaria were screened for the availability of QMS certified against the ISO 9001 requirements. The experience of European hospitals that implemented QMS is positive and the used approaches to improve the processes and the demonstrated effects from ISO implementation are analysed by the researchers. Unlike other European Union member states, the establishment of quality management systems in Bulgaria is not compulsory. However, our study revealed that 14.42% of the hospitals in Bulgaria have implemented and have certified quality systems against the requirements of ISO 9001. Our study confirmed that a quality management system using the ISO 9001 standard is useful for the hospitals as it can help to increase the operational efficiencies, to reduce errors, improve patient safety and produce a more preventive approach instead of a reactive environment.

  13. 2π proportional counting chamber for large-area-coated β sources

    Indian Academy of Sciences (India)

    Keywords. Surface contamination; windowless proportional counter; beta counting chamber; large area coated sources. Abstract. Detection system for measuring absolute emission rate from large-area-coated β sources has been indigenously developed. The system consists of a multiwire-based proportional counter with ...

  14. Effects of uncertainty in model predictions of individual tree volume on large area volume estimates

    Science.gov (United States)

    Ronald E. McRoberts; James A. Westfall

    2014-01-01

    Forest inventory estimates of tree volume for large areas are typically calculated by adding model predictions of volumes for individual trees. However, the uncertainty in the model predictions is generally ignored with the result that the precision of the large area volume estimates is overestimated. The primary study objective was to estimate the effects of model...

  15. ISO 9001 quality management systems

    CERN Document Server

    Natarajan, Dhanasekharan

    2017-01-01

    This book explains the requirements of ISO 9001 for establishing quality management system (QMS) for an organization. The requirements are illustrated with examples from industries for understanding the requirements and preparing the documents of QMS with high clarity. Methods of integrating ISO 9001 requirements with enterprise resource planning (ERP) software are presented. The software integrated approach enables process owners to focus on their core tasks of achieving the planned outputs of processes and the software generates quality records automatically.

  16. ISO 9001 benefits and pitfalls: the path to successful certification.

    Science.gov (United States)

    Krause, M S

    1996-09-01

    The lifeblood of a business is developing and commercializing new products with minimum cost and time and maximum quality. Implementation of a quality management system is often used to achieve these goals, and the ISO 9001 standard for a business quality system is rapidly becoming the model of choice. The existence of an ISO-compliant system is a key to meeting the forthcoming regulatory requirements in the European Union and the US Food and Drug Administrations's proposed good management practices. DuPont has demonstrated leadership in the achievement of ISO registration. I describe the path to these successful registrations along with key lessons from the experience. Elements of success are management commitment, adequate resources, education, communication, total organizational involvement, and auditing of system performance. For the system to flourish and provide benefits to the users, sufficient time must be allocated for the organization to change.

  17. Integrated management system: The integration of ISO 9001, ISO 14001, OHSAS 18001 and ISO 31000

    Science.gov (United States)

    Muzaimi, Hafizzudin; Chew, Boon Cheong; Hamid, Syaiful Rizal

    2017-03-01

    The implementation of integrated management system (IMS) for better quality management has become a preference for many organizations. This can be seen as many organizations used the combination of quality ISO 9001, an environment ISO 14001 and occupational health and safety management system OHSAS 18001 as a core for the IMS that largely implemented. Besides, the linked between quality management with risk management system need to be identified as the management system that enhance the effectiveness of IMS. Therefore, the risk management system ISO 31000 also presented as a part of integration. In nowadays competitive environment, the increasing pressure and needs from customer or stakeholders make it compulsory for the organization to propose the new system and standards. This paper presents and discusses about the benefit of integration, the management system components that can be converged and the implementation approach. A series of interview was conducted through in-depth interviews with 8 experts in this field, while data collected were analyzed qualitatively. The results consist of 16 factors of IMS implementation that have been identified and the use of PDCA approach for an effective implementation of IMS. As a conclusion, the paper proposes the integration of four management systems (ISO 9001, ISO 14001, OHSAS 18001 and ISO 31000) and on how the IMS can be used to structure the process of management for quality management towards sustainability practices in the organization.

  18. Large area substrate for surface enhanced Raman spectroscopy (SERS) using glass-drawing technique

    Science.gov (United States)

    Ivanov, Ilia N; Simpson, John T

    2012-06-26

    A method of making a large area substrate comprises drawing a plurality of tubes to form a plurality of drawn tubes, and cutting the plurality of drawn tubes into cut drawn tubes. Each cut drawn tube has a first end and a second end along the longitudinal direction of the respective cut drawn tube. The cut drawn tubes collectively have a predetermined periodicity. The method of making a large area substrate also comprises forming a metal layer on the first ends of the cut drawn tubes to provide a large area substrate.

  19. Tinjauan Kritis terhadap Implementasi Iso 9000

    OpenAIRE

    Nursya’bani Purnama

    2009-01-01

    ISO 9000 telah diterima secara luas sebagai acuan sistem manajemen kualitas dan penjaminan kualitas. Perusahaan-perusahaan yang memperoleh sertifikasi ISO dari tahun ke ke tahun mengalami pertumbu¬han yang pesat. Dengan implementasi dan memperoleh sertifikasi ISO 9000, banyak perusahaan di dunia mem¬peroleh peningkatan kinerja. Meskipun demikian, implementasi ISO 9000 juga dihadapkan pada sejumlah ham¬batan. Implementasi ISO 9000 seringkali dikaitkan dengan Total Quality Management (TQM). Ban...

  20. Tinjauan Kritis Terhadap Implementasi Iso 9000

    OpenAIRE

    Purnama, Nursya’bani

    2005-01-01

    ISO 9000 telah diterima secara luas sebagai acuan sistem manajemen kualitas dan penjaminan kualitas. Perusahaan-Perusahaan yang memperoleh sertifikasi ISO dari tahun ke ke tahun mengalami pertumbu¬han yang pesat. Dengan implementasi dan memperoleh sertifikasi ISO 9000, banyak Perusahaan di dunia mem¬peroleh peningkatan kinerja. Meskipun demikian, implementasi ISO 9000 juga dihadapkan pada sejumlah ham¬batan. Implementasi ISO 9000 seringkali dikaitkan dengan Total Quality Management (TQM). Ban...

  1. Energy management systems in the practice. ISO 50001. A guideline for companies and institutions; Energiemanagementsysteme in der Praxis. ISO 50001. Leitfaden fuer Unternehmen und Organisationen

    Energy Technology Data Exchange (ETDEWEB)

    Kohlenborn, Walter; Kabisch, Sibylle; Klein, Johanna; Richter, Ina; Schuermann, Silas

    2012-06-15

    The guideline under consideration is an updated version of the guideline to the regulation EN 16001 and amended to ISO 50001. This contribution supports institutes in the implementation of an energy management system according to ISO 50001. The differences and commonalities to the European environment management system EMAS as well as to the regulation ISO 14001 are described. EMAS certified companies fulfil regularly all conditions of an energy management system. A practised energy management system is an excellent platform for the implementation of EMAS.

  2. ISO 15189 Accreditation: Navigation Between Quality Management and Patient Safety

    Directory of Open Access Journals (Sweden)

    Plebani Mario

    2017-09-01

    Full Text Available Accreditation is a valuable resource for clinical laboratories and the development of an International Standard for their accreditation represented a milestone on the path towards improved quality and safety in laboratory medicine. The recent revision of the International Standard, ISO 15189, has further strengthened its value not only for improving the quality system of a clinical laboratory but also for better answering the request for competence, focus on customers’ needs and ultimate value of laboratory services. Although in some countries more general standards such as ISO 9001 for quality systems or ISO 17025 for testing laboratories are still used, there is increasing recognition of the value of ISO 15189 as the most appropriate and useful standard for the accreditation of medical laboratories. In fact, only this International Standard recognizes the importance of all steps of the total testing process, namely extra-analytical phases, the need to focus on technical competence in addition to quality systems, and the focus on customers’ needs. However, the number of accredited laboratories largely varies between European countries and also major differences affect the approaches to accreditation promoted by the national bodies. In particular, some national accreditation bodies perpetuate the use of fixed scopes, while the European co-operation for accreditation (EA and the European Federation of Laboratory Medicine (EFLM Working Group promote the use of flexible scopes. Major issues in clinical laboratory accreditation are the verification of examination procedures for imprecision, trueness and diagnostic accuracy and for estimating measurement uncertainty. In addition, quality indicators (QIs are a fundamental requirement of the ISO 15189 International Standard.

  3. [ISO 15189 medical laboratory accreditation].

    Science.gov (United States)

    Aoyagi, Tsutomu

    2004-10-01

    This International Standard, based upon ISO/IEC 17025 and ISO 9001, provides requirements for competence and quality that are particular to medical laboratories. While this International Standard is intended for use throughout the currently recognized disciplines of medical laboratory services, those working in other services and disciplines will also find it useful and appropriate. In addition, bodies engaged in the recognition of the competence of medical laboratories will be able to use this International Standard as the basis for their activities. The Japan Accreditation Board for Conformity Assessment (AB) and the Japanese Committee for Clinical Laboratory Standards (CCLS) are jointly developing the program of accreditation of medical laboratories. ISO 15189 requirements consist of two parts, one is management requirements and the other is technical requirements. The former includes the requirements of all parts of ISO 9001, moreover it includes the requirement of conformity assessment body, for example, impartiality and independence from any other party. The latter includes the requirements of laboratory competence (e.g. personnel, facility, instrument, and examination methods), moreover it requires that laboratories shall participate proficiency testing(s) and laboratories' examination results shall have traceability of measurements and implement uncertainty of measurement. Implementation of ISO 15189 will result in a significant improvement in medical laboratories management system and their technical competence. The accreditation of medical laboratory will improve medical laboratory service and be useful for patients.

  4. A new herbarium-based method for reconstructing the phenology of plant species across large areas

    National Research Council Canada - National Science Library

    Lavoie, Claude; Lachance, Daniel

    2006-01-01

    ... associated with sampling locations. In this study, we propose a new herbarium-based method for reconstructing the flowering dates of plant species that have been collected across large areas. Coltsfoot...

  5. Large-Area, UV-Optimized, Back-Illuminated Silicon Photomultiplier Arrays Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Large-area (3m2), UV-sensitive focal plane arrays are needed for observation of air showers from ultra-high energy cosmic rays (JEM-EUSO) as well as for...

  6. Characterisation of large area THGEMs and experimental measurement of the Townsend coefficients for CF4

    Science.gov (United States)

    Burns, J.; Crane, T.; Ezeribe, A. C.; Grove, C. L.; Lynch, W.; Scarff, A.; Spooner, N. J. C.; Steer, C.

    2017-10-01

    Whilst the performance of small THGEMs is well known, here we consider the challenges in scaling these up to large area charge readouts. We first verify the expected gain of larger THGEMs by reporting experimental Townsend coefficients for a 10 cm diameter THGEM in low-pressure CF4. Large area 50 cm by 50 cm THGEMs were sourced from a commercial PCB supplier and geometrical imperfections were observed which we quantified using an optical camera setup. The large area THGEMs were experimentally characterised at Boulby Underground Laboratory through a series of gain calibrations and alpha spectrum measurements. ANSYS, Magboltz and Garfield++ simulations of the design of a TPC based on the large area THGEMs are presented. We also consider their implications for directional dark matter research and potential applications within nuclear security.

  7. Graphene-based large area dye-sensitized solar cell modules

    Science.gov (United States)

    Casaluci, Simone; Gemmi, Mauro; Pellegrini, Vittorio; di Carlo, Aldo; Bonaccorso, Francesco

    2016-02-01

    We demonstrate spray coating of graphene ink as a viable method for large-area fabrication of graphene-based dye-sensitized solar cell (DSSC) modules. A graphene-based ink produced by liquid phase exfoliation of graphite is spray coated onto a transparent conductive oxide substrate to realize a large area (>90 cm2) semi-transparent (transmittance 44%) counter-electrode (CE) replacing platinum, the standard CE material. The graphene-based CE is successfully integrated in a large-area (43.2 cm2 active area) DSSC module achieving a power conversion efficiency of 3.5%. The approach demonstrated here paves the way to all-printed, flexible, and transparent graphene-based large-area and cost-effective photovoltaic devices on arbitrary substrates.

  8. Large Area Active Brazing of Multi-tile Ceramic-Metal Structures

    Science.gov (United States)

    2012-05-01

    Large Area Active Brazing of Multi-tile Ceramic-Metal Structures by Kevin J. Doherty ARL-RP-366 May 2012 A...reprint from the Proceedings From the 5th International Brazing and Soldering Conference, Las Vegas, NV, 22–25 April 2012...Army Research Laboratory Aberdeen Proving Ground, MD 21005-5069 ARL-RP-366 May 2012 Large Area Active Brazing of Multi-tile

  9. Highly Flexible and High-Performance Complementary Inverters of Large-Area Transition Metal Dichalcogenide Monolayers

    KAUST Repository

    Pu, Jiang

    2016-03-23

    Complementary inverters constructed from large-area monolayers of WSe2 and MoS2 achieve excellent logic swings and yield an extremely high gain, large total noise margin, low power consumption, and good switching speed. Moreover, the WSe2 complementary-like inverters built on plastic substrates exhibit high mechanical stability. The results provide a path toward large-area flexible electronics. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  10. Production of the Large-area Plastic Scintillator for Beta-ray Detection using Epoxy Resin

    Energy Technology Data Exchange (ETDEWEB)

    Nam, Jong Soo; Choi, Yong Seok; Hong, Sang Bum; Seo, Bum Kyung; Moon, Jei Kwon; Choi, Jong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    In this study, we prepared a plastic scintillator whose manufacturing process is simple and can be freely shaped. A thin plate of the plastic scintillator was manufactured using epoxy resin as a polymer. The plastic scintillator was made by mixing epoxy resin and organic scintillators under various conditions. The optimal mixture ratio to prepare the plastic scintillator was derived from the above results. Using the derived results, we made the large-area plastic scintillator which can quickly measure the contamination site and evaluated characteristics of the large-area plastic scintillator in the laboratory. A thin plate of a plastic scintillator with a simple preparation process can be freely shaped using epoxy resin and organic scintillators such as PPO and POPOP. PPO emits scintillation of light in the ultraviolet range, and POPOP is a wave shifter for moving the wavelength responsible for the PMT. The mixture ratio of PPO and POPOP was determined using their emission spectra. The optimal weight percentage of PPO and POPOP in an organic scintillator was determined to be 0.2 wt%:0.01 wt%. Based on the above results, the large-area plastic scintillator of the window size of a typical pancake-type αβ surface contamination counter was prepared. We want to evaluate the characteristics of the large-area plastic scintillator. However, there were the difficulties in evaluating characteristics of the large-area plastic scintillator. The cross-sectional area of the large-area plastic scintillator is significantly different to PMT.

  11. ISO 14001: time for improvements?

    DEFF Research Database (Denmark)

    Jørgensen, Tine Herreborg

    2007-01-01

    The aim of this paper is to discuss a number of issues related to ISO 14001:2004, the international standard for Environmental Management Systems (EMS) with the purpose of improving the next edition in order to recognise and reflect new recognitions in approaches to pollution prevention. A case...... study is presented and shows lack of life cycle thinking in product development. This paper suggests changes of ISO 14001:2004 in order to include a more product-oriented approach and a stronger focus on stakeholders. It also suggests to formulate clearer demands for targets and environmental...

  12. Environmental Management System ISO 14001

    CERN Document Server

    Haider, Syed

    2010-01-01

    This is a must-have tool for any company in the process of adopting and incorporating the ISO 14001:2004 requirements, this book and accompanying CD-ROM provides the latest updates and amendments and translates the ISO language into actionable strategy. Offering administrative solutions to managers of all sorts, it includes practical examples of policies with objectives, targets, and action plans applicable to any process related industry or an ordinary organization. With template formats and hands-on flow charts to describe step-by-step system development, documentation, and implementation ph

  13. Information security risk management for ISO27001/ISO27002

    CERN Document Server

    Calder, A; Watkins, S

    2010-01-01

    Drawing on international best practice, including ISO/IEC 27005, NIST SP800-30 and BS7799-3, the book explains in practical detail how to carry out an information security risk assessment. It covers key topics, such as risk scales, threats and vulnerabilities, selection of controls, and roles and responsibilities, and includes advice on choosing risk assessment software.

  14. Food service compliance with ISO 14001 and ISO 22000

    Directory of Open Access Journals (Sweden)

    Laura Lyra Santos

    2012-06-01

    Full Text Available OBJECTIVE: The objective of this study was to assess food service environmental and food safety management systems according to two checklists based on ABNT ISO 22000 and 14001. METHODS: This exploratory and descriptive study investigated a-la-carte food services of the Federal District, Brazil. Two checklists were developed to investigate ISO 14001 and 22000 compliance. A total of 37 food services were selected from the list of the Brazilian Association of Bars and Restaurants by simple random sampling. Checklist results were analyzed according to ANVISA resolution nº 275/2002. RESULTS: Only five food services employed dietitians to supervise meal production. These establishments achieved the highest ISO compliance. However, no establishment had more than 50% ISO 14001 or 22000 compliance. Restaurants showed little concern for the environment and disobeyed waste disposal laws by not separating recyclables from non-recyclables. CONCLUSION: The study food services do not have safe meal production systems, evidenced by non-conformity with the reference standards. Additionally, they do not attempt to reduce the environmental impact of their wastes. Food services supervised by dietitians are better prepared to produce safe foods.

  15. ISO TS/15216; an international standard method for the detection and quantification of norovirus in high risk foodstuffs

    DEFF Research Database (Denmark)

    Lowther, James; Schultz, Anna Charlotte

    of standardised methods, however in March 2013 the International Standards Organisation (ISO) and European Committee for Standardization (CEN) published a joint technical specification for detection and quantification of viruses including norovirus GI and GII in foods using real-time RT-PCR (ISO/TS 15216...

  16. Ny versjon av standarden ISO 15489

    OpenAIRE

    Herbjørn Andresen

    2016-01-01

    Standarden NS-ISO 15489-1:2016 er gjeldende norsk standard fra 1. juli 2016. Dette er andre versjon av ISO 15489, den første versjonen fra 2001 er ikke lenger gyldig. 2001-utgaven av ISO 15489 besto av to deler. Del 2, SN-ISO/TR 15489-2:2001 er trukket, slik at den nye ISO 15489 kun består av del 1. ISO 15489 var den første internasjonale Records Management-standarden, og har en funksjon som overordnet referansestandard for en voksende portefølje av senere standarder på tilgrensende områder. ...

  17. The use of International Standards Organization ISO 9000 quality assurance standards in place of military standards

    Science.gov (United States)

    Beckerdite, Stanley M.

    1992-06-01

    The implementation of quality standards within the European Community by the creation of International Quality Standards 9000 is another step toward development of a global marketplace. It is in the interests of DoD to support this trend in order to help maintain the defense industrial base. The first part of this study performs a comparison of DoD quality standards to the ISO 9000 Standards. The second part of the study consists of a survey of U.S. firms that have become ISO 9000 registered. This survey is intended to provide an assessment of the current movement within the defense industrial base toward adoption of ISO 9000 Standards. The survey also attempts to identify potential implementation issues relating to adoption of ISO 9000 Standards in place of military standards. It is concluded that DoD should implement ISO 9000 and that the impact of this implementation will be favorable.

  18. Evaluation of ISO EN 13606 as a result of its implementation in XML.

    Science.gov (United States)

    Austin, Tony; Sun, Shanghua; Hassan, Taher; Kalra, Dipak

    2013-12-01

    The five parts of the ISO EN 13606 standard define a means by which health-care records can be exchanged between computer systems. Starting within the European standardisation process, it has now become internationally ratified in ISO. However, ISO standards do not require that a reference implementation be provided, and in order for ISO EN 13606 to deliver the expected benefits, it must be provided not as a document, but as an operational system that is not vendor specific. This article describes the evolution of an Extensible Markup Language (XML) Schema through three iterations, each of which emphasised one particular approach to delivering an executable equivalent to the printed standard. Developing these operational versions and incorporating feedback from users of these demonstrated where implementation compromises were needed and exposed defects in the standard. These are discussed herein. They may require a future technical revision to ISO EN 13606 to resolve the issues identified.

  19. Our Application of ISO 9000.

    Science.gov (United States)

    Hammond, Jane

    2000-01-01

    Since a large, underfunded urban Colorado district initiated ISO 9000 reforms, administrators and staff have reviewed 14 central-office departments' processes to improve efficiency and enhance student outcomes. Jefferson County has saved $900,000 annually on purchasing processes, developed a quality curriculum-development process, and improved…

  20. Comparison of ISO standards for device performance; 20072 and 27427: a critical appraisal.

    Science.gov (United States)

    Nerbrink, Ola; Mitchell, Jolyon P

    2012-08-01

    Two separate international standards, ISO 20072:2009 and ISO 27427:2010, have recently been published that relate to the development and performance testing of oral inhaled products (OIPs). The scope of ISO 20072 encompasses all OIP forms except nebulizing systems, whereas ISO 27427 was developed specifically for this class of OIP. Compliance with these standards will likely be necessary for manufacturers seeking approval to market inhaler devices in the European Union (EU). Their adoption in the United States may take a considerable time, but the FDA has expressed support in general terms for the ISO process. Key aspects of both standards that are very different in style and content are identified and discussed from the perspective of a potential user. In the approach adopted by ISO 20072, a formalized risk assessment is undertaken as a key part of design verification, in order to develop the Device Functionality Profile (DFP) of the device. The DFP is subsequently verified by the System Verification Test (SVT), in which pharmacopeial test methods are used to evaluate in vitro performance of the device with a chosen drug product in a statistically robust manner. On the other hand, ISO 27427 adopts a more prescriptive approach that involves performance verification of the finished nebulizing system using 1% w/v salbutamol as the test formulation. Although ISO 27427 is currently undergoing revision, at present it is unclear whether the changes that are made will significantly alter its fundamentally different approach to device performance verification. A strong case can be made for a single OIP-wide ISO standard, based on the principles developed in ISO 20072 and that makes use of the well-understood and validated in vitro test procedures that are available or will shortly be available in the case of nebulizing systems, in the United States and European pharmacopeias.

  1. Combining large area fluorescence with multiphoton microscopy for improved detection of oral epithelial neoplasia (Conference Presentation)

    Science.gov (United States)

    Pal, Rahul; Yang, Jinping; Qiu, Suimin; McCammon, Susan; Resto, Vicente; Vargas, Gracie

    2016-03-01

    Volumetric Multiphoton Autofluorescence Microscopy (MPAM) and Second Harmonic Generation Microscopy (SHGM) show promise for revealing indicators of neoplasia representing the complex microstructural organization of mucosa, potentially providing high specificity for detection of neoplasia, but is limited by small imaging area. Large area fluorescence methods on the other hand show high sensitivity appropriate for screening but are hampered by low specificity. In this study, we apply MPAM-SHGM following guidance from large area fluorescence, by either autofluorescence or a targeted metabolic fluorophore, as a potentially clinically viable approach for detection of oral neoplasia. Sites of high neoplastic potentially were identified by large area red/green autofluorescence or by a fluorescently labelled deoxy-glucose analog, 2-deoxy-2-[(7-nitro-2,1,3-benzoxadiazol-4-yl)amino]-D-glucose (2-NBDG) to highlight areas of high glucose uptake across the buccal pouch of a hamster model for OSCC. Follow-up MPAM-SHGM was conducted on regions of interests (ROIs) to assess whether microscopy would reveal microscopic features associated with neoplasia to confirm or exclude large area fluorescence findings. Parameters for analysis included cytologic metrics, 3D epithelial connective tissue interface metrics (MPAM-SHGM) and intensity of fluorescence (widefield). Imaged sites were biopsied and processed for histology and graded by a pathologist. A small sample of human ex vivo tissues were also imaged. A generalized linear model combining image metrics from large area fluorescence and volumetric MPAM-SHGM indicated the ability to delineate normal and inflammation from neoplasia.

  2. Synthesis of Large Area Graphene for High Performance in Flexible Optoelectronic Devices

    Science.gov (United States)

    Polat, Emre O.; Balci, Osman; Kakenov, Nurbek; Uzlu, Hasan Burkay; Kocabas, Coskun; Dahiya, Ravinder

    2015-11-01

    This work demonstrates an attractive low-cost route to obtain large area and high-quality graphene films by using the ultra-smooth copper foils which are typically used as the negative electrodes in lithium-ion batteries. We first compared the electronic transport properties of our new graphene film with the one synthesized by using commonly used standard copper foils in chemical vapor deposition (CVD). We observed a stark improvement in the electrical performance of the transistors realized on our graphene films. To study the optical properties on large area, we transferred CVD based graphene to transparent flexible substrates using hot lamination method and performed large area optical scanning. We demonstrate the promise of our high quality graphene films for large areas with ~400 cm2 flexible optical modulators. We obtained a profound light modulation over a broad spectrum by using the fabricated large area transparent graphene supercapacitors and we compared the performance of our devices with the one based on graphene from standard copper. We propose that the copper foils used in the lithium-ion batteries could be used to obtain high-quality graphene at much lower-cost, with the improved performance of electrical transport and optical properties in the devices made from them.

  3. Recent development of the Multi-Grid detector for large area neutron scattering instruments

    Energy Technology Data Exchange (ETDEWEB)

    Guerard, Bruno [ILL-ESS-LiU collaboration, CRISP project, Institut Laue Langevin - ILL, Grenoble (France)

    2015-07-01

    Most of the Neutron Scattering facilities are committed in a continuous program of modernization of their instruments, requiring large area and high performance thermal neutron detectors. Beside scintillators detectors, {sup 3}He detectors, like linear PSDs (Position Sensitive Detectors) and MWPCs (Multi-Wires Proportional Chambers), are the most current techniques nowadays. Time Of Flight instruments are using {sup 3}He PSDs mounted side by side to cover tens of m{sup 2}. As a result of the so-called '{sup 3}He shortage crisis{sup ,} the volume of 3He which is needed to build one of these instruments is not accessible anymore. The development of alternative techniques requiring no 3He, has been given high priority to secure the future of neutron scattering instrumentation. This is particularly important in the context where the future ESS (European Spallation Source) will start its operation in 2019-2020. Improved scintillators represent one of the alternative techniques. Another one is the Multi-Grid introduced at the ILL in 2009. A Multi-Grid detector is composed of several independent modules of typically 0.8 m x 3 m sensitive area, mounted side by side in air or in a vacuum TOF chamber. One module is composed of segmented boron-lined proportional counters mounted in a gas vessel; the counters, of square section, are assembled with Aluminium grids electrically insulated and stacked together. This design provides two advantages: First, magnetron sputtering techniques can be used to coat B{sub 4}C films on planar substrates, and second, the neutron position along the anode wires can be measured by reading out individually the grid signals with fast shaping amplifiers followed by comparators. Unlike charge division localisation in linear PSDs, the individual readout of the grids allows operating the Multi-Grid at a low amplification gain, hence this detector is tolerant to mechanical defects and its production accessible to laboratories equipped with standard

  4. Progress report on the management of the NEA ISOE system

    Energy Technology Data Exchange (ETDEWEB)

    Lazo, E. [OECD Nuclear Energy Agency, Issy-les-Moulineaux (France)

    1995-03-01

    The Information System on Occupational Exposure (ISOE) was launched by the Organization for Economic Cooperation and Development (OECD), Nuclear Energy Agency (NEA) on 1 January, 1992, to facilitate the communication of dosimetric and ALARA implementation data among nuclear utilities around the world. After two years of operation the System has become a mature interactive network for transfer of data and experience. Currently, 37 utilities from 12 countries, representing 289 power plants, and 12 national regulatory authorities participate in ISOE. Agreements for cooperation also exist between the NEA and the Commission of the European Communities (CEC), and the Paris Center of the WOrld Association of Nuclear Operators (WANO-PC). In addition, the International Atomic Energy Agency (IAEA) is acting as a co-sponsor of ISOE for the participation of non-NEA member countries. Three Regional Technical Centres, Europe, Asia, and Non-NEA member countries, serve to administer the system. The ISOE Network is comprised of three data bases and a communications network at several levels. The three ISOE data bases include the following types of information: NEA1 - annual plant dosimetric information; NEA2 - plant operational characteristics for dose and dose rate reduction; and NEA3 - job specific ALARA practices and experiences. The ISOE communications network has matured greatly during 1992 and 1993. In addition to having access to the above mentioned data bases, participants may now solicit information on new subjects, through the Technical Centres, from all other participants on a real-time basis. Information Sheets on these studies are produced for distribution to all participants. In addition, Topical Reports on areas of interest are produced, and Topical Meetings are held annually.

  5. Productivity and efficiency of economic activity of the Lower Silesia's large area farms in comparison with other large area farms in Poland

    Directory of Open Access Journals (Sweden)

    Stanisław Minta

    2009-01-01

    Full Text Available The paper shows economical and financial situation of the agricultural companies which have most of the grounds in lease. Analysed objects were settled on Lower Silesia (the province in the south – west Poland. The main part of the results of research was about productivity and efficiency of economic resources in these objects. The research was made in years 2000-2002. The results of research in analyzed Lower Silesia’s companies were compared with the best Polish large area farms in order of law and organisation forms: leased farms, private farms and partnerships of Polish public agency AWRSP.

  6. Application Security in the ISO27001 Environment

    CERN Document Server

    Vinod, Vasudevan; Firosh, Ummer

    2008-01-01

    Application Security in the ISO27001 Environment demonstrates how to secure software applications within a best practice ISO/IEC 27001 environment and supports implementation of the PCI DSS Payment Application Security Standard.

  7. A new large area scintillator screen for X-ray imaging

    Science.gov (United States)

    Nagarkar, V. V.; Miller, S. R.; Tipnis, S. V.; Lempicki, A.; Brecher, C.; Lingertat, H.

    2004-01-01

    We report on the development of a new, large area, powdered scintillator screen based on Lu 2O 3(Eu). As reported earlier, the transparent ceramic form of this material has a very high density of 9.4 g/cm 3, a high light output comparable to that of CsI(Tl), and emits in a narrow spectral band centered at about 610 nm. Research into fabrication of this ceramic scintillator in a large area format is currently underway, however the process is not yet practical for large scale production. Here we have explored fabrication of large area screens using precursor powders from which the ceramics are fabricated. To date we have produced up to 16 × 16 cm 2 area screens with thickness in the range of 18 mg/cm 2. This paper outlines the screen fabrication technique and presents its imaging performance in comparison with a commercial Gd 2O 2S:Tb (GOS) screen.

  8. Chemical hole doping into large-area transition metal dichalcogenide monolayers using boron-based oxidant

    Science.gov (United States)

    Matsuoka, Hirofumi; Kanahashi, Kaito; Tanaka, Naoki; Shoji, Yoshiaki; Li, Lain-Jong; Pu, Jiang; Ito, Hiroshi; Ohta, Hiromichi; Fukushima, Takanori; Takenobu, Taishi

    2018-02-01

    Hole carrier doping into single-crystalline transition metal dichalcogenide (TMDC) films can be achieved with various chemical reagents. However, large-area polycrystalline TMDC monolayers produced by a chemical vapor deposition (CVD) growth method have yet to be chemically doped. Here, we report that a salt of a two-coordinate boron cation, Mes2B+ (Mes: 2,4,6-trimethylphenyl group), with a chemically stable tetrakis(pentafluorophenyl)borate anion, [(C6F5)4B]‑, can serve as an efficient hole-doping reagent for large-area CVD-grown tungsten diselenide (WSe2) films. Upon doping, the sheet resistance of large-area polycrystalline WSe2 monolayers decreased from 90 GΩ/sq to 3.2 kΩ/sq.

  9. Solution Coating of Superior Large-Area Flexible Perovskite Thin Films with Controlled Crystal Packing

    KAUST Repository

    Li, Jianbo

    2017-05-08

    Solution coating of organohalide lead perovskites offers great potential for achieving low-cost manufacturing of large-area flexible optoelectronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of crystal packing. Herein, this study reports using solution shearing to confine crystal nucleation and growth in large-area printed MAPbI3 thin films. Near single-crystalline perovskite microarrays are demonstrated with a high degree of controlled macroscopic alignment and crystal orientation, which exhibit significant improvements in optical and optoelectronic properties comparing with their random counterparts, spherulitic, and nanograined films. In particular, photodetectors based on the confined films showing intense anisotropy in charge transport are fabricated, and the device exhibits significantly improved performance in all aspects by one more orders of magnitude relative to their random counterparts. It is anticipated that perovskite films with controlled crystal packing may find applications in high-performance, large-area printed optoelectronics, and solar cells.

  10. Quantum efficiency measurement system for large area CsI photodetectors

    CERN Document Server

    Cusanno, F; Colilli, S; Crateri, R; Fratoni, R; Frullani, S; Garibaldi, F; Giuliani, F; Gricia, M; Lucentini, M; Mostarda, A; Santavenere, F; Veneroni, P; Breuer, H; Iodice, M; Urciuoli, G M; De Cataldo, G; De Leo, R; Lagamba, L; Braem, André

    2003-01-01

    A proximity focusing freon/CsI RICH detector has been built for kaon physics at Thomas Jefferson National Accelerator Facility (TJNAF or Jefferson Lab), Hall A. The Cherenkov photons are detected by a UV photosensitive CsI film which has been obtained by vacuum evaporation. A dedicated evaporation facility for large area photocathodes has been built for this task. A measuring system has been built to allow the evaluation of the absolute quantum efficiency (QE) just after the evaporation. The evaporation facility is described here, as well as the quantum efficiency measurement device. Results of the QE on-line measurements, for the first time on large area photocathodes, are reported.

  11. Large area inkjet printing for organic solar cells and OLEDs using non-halogenated ink formulations

    NARCIS (Netherlands)

    Eggenhuisen, T.M.; Coenen, M.J.J.; Staats, T.W.L.; Gorter, H.; Sweelssen, J.; Groen, P.

    2013-01-01

    Transferring lab-scale processes of organic electronics to large area roll-to-roll production requires the use of up-scalable deposition techniques. Furthermore, industrial production demands the omission of halogenated and other harmful solvents. Here we discuss the solution processing of organic

  12. Utility of LiDAR for large area forest inventory applications

    Science.gov (United States)

    Nicholas S. Skowronski; Andrew J. Lister

    2012-01-01

    Multi-resource inventory data are used in conjunction with Light Detection and Ranging (LiDAR) data from the Pennsylvania Department of Natural Resource's PAMAP Program to assess the utility of extensive LiDAR acquisitions for large area forest assessments. Background, justification, and initial study designs are presented. The proposed study will involve three...

  13. Beam Test of Gamma-ray Large Area Space Telescope Components

    Energy Technology Data Exchange (ETDEWEB)

    Bloom, Elliott D

    1999-05-27

    A beam test of GLAST (Gamma-ray Large Area Space Telescope) components was performed at the Stanford Linear Accelerator Center in October, 1997. These beam test components were simple versions of the planned light hardware. Results on the performance of the tracker, calorimeter, and anticoincidence charged particle veto are presented.

  14. A Brief Technical History of the Large-Area Picosecond Photodetector (LAPPD) Collaboration

    Energy Technology Data Exchange (ETDEWEB)

    Adams, B.W.; et al.

    2016-03-06

    The Large Area Picosecond PhotoDetector (LAPPD) Collaboration was formed in 2009 to develop large-area photodetectors capable of time resolutions measured in pico-seconds, with accompanying sub-millimeter spatial resolution. During the next three and one-half years the Collaboration developed the LAPPD design of 20 x 20 cm modules with gains greater than $10^7$ and non-uniformity less than $15\\%$, time resolution less than 50 psec for single photons and spatial resolution of 700~microns in both lateral dimensions. We describe the R\\&D performed to develop large-area micro-channel plate glass substrates, resistive and secondary-emitting coatings, large-area bialkali photocathodes, and RF-capable hermetic packaging. In addition, the Collaboration developed the necessary electronics for large systems capable of precise timing, built up from a custom low-power 15-GigaSample/sec waveform sampling 6-channel integrated circuit and supported by a two-level modular data acquisition system based on Field-Programmable Gate Arrays for local control, data-sparcification, and triggering. We discuss the formation, organization, and technical successes and short-comings of the Collaboration. The Collaboration ended in December 2012 with a transition from R\\&D to commercialization.

  15. Large area two-dimensional silicon photonic crystals for infrared light fabricated with laser interference lithography

    NARCIS (Netherlands)

    Prodan, L.G.; Euser, T.G.; van Wolferen, Hendricus A.G.M.; Bostan, C.G.; de Ridder, R.M.; Beigang, R.; Boller, Klaus J.; Kuipers, L.

    We report on the production of large-area 2D photonic crystals from high-index material with laser interference lithography (LIL). A new image reversal photoresist is used in combination with an anti-reflection coating to suppress undesired reflections. The photonic crystals possess a cubic pattern

  16. Ultra-low thermal conductivities in large-area Si-Ge nanomeshes for thermoelectric applications.

    Science.gov (United States)

    Perez-Taborda, Jaime Andres; Muñoz Rojo, Miguel; Maiz, Jon; Neophytou, Neophytos; Martin-Gonzalez, Marisol

    2016-09-21

    In this work, we measure the thermal and thermoelectric properties of large-area Si0.8Ge0.2 nano-meshed films fabricated by DC sputtering of Si0.8Ge0.2 on highly ordered porous alumina matrices. The Si0.8Ge0.2 film replicated the porous alumina structure resulting in nano-meshed films. Very good control of the nanomesh geometrical features (pore diameter, pitch, neck) was achieved through the alumina template, with pore diameters ranging from 294 ± 5nm down to 31 ± 4 nm. The method we developed is able to provide large areas of nano-meshes in a simple and reproducible way, being easily scalable for industrial applications. Most importantly, the thermal conductivity of the films was reduced as the diameter of the porous became smaller to values that varied from κ = 1.54 ± 0.27 W K(-1)m(-1), down to the ultra-low κ = 0.55 ± 0.10 W K(-1)m(-1) value. The latter is well below the amorphous limit, while the Seebeck coefficient and electrical conductivity of the material were retained. These properties, together with our large area fabrication approach, can provide an important route towards achieving high conversion efficiency, large area, and high scalable thermoelectric materials.

  17. Large area/high rate sputtering of materials for electro-chromic devices

    Energy Technology Data Exchange (ETDEWEB)

    Howson, R.P. [Loughborough Univ. of Technology (United Kingdom). Dept. of Physics

    1990-12-31

    The preparation of any large area system is going to require a deposition system for the thin film elements of the device which not only have the properties required but also can be made in the large areas, and for the low cost, that will be needed for any device which is to have any large-scale applicability. Techniques for the large-scale production of multi-layer optical filters for use in windows for buildings and cars have appeared over the last few years, and it has been demonstrated that planner magnetron sputtering can give the large area uniformity, low cost and high rate required for such a system. Part of this process includes the reactive deposition of an oxide. The properties of this oxide are not critical, but research is proceeding into the techniques that need to be used to manufacture oxides with much better control of their properties while maintaining the advantages of large area availability and low cost. It is the intention of this contribution to consider this process--d.c. reactive planar magnetron sputtering--and assess the likely use of it to prepare electro-chromic devices for large-scale applications.

  18. Results from the beam test of the engineering model of the GLAST large area telescope

    Energy Technology Data Exchange (ETDEWEB)

    Couto e Silva, E. do E-mail: eduardo@slac.stanford.edu; Anthony, P.; Arnold, R.; Arrighi, H.; Bloom, E.; Baughman, B.; Bogart, J.; Bosted, P.; Bumala, B.; Chekhtman, A.; Cotton, N.; Crider, A.; Dobbs-Dixon, I.; Djannati-Atai, A.; Dubois, R.; Engovatov, D.; Espigat, P.; Evans, J.L.; Fieguth, T.; Flath, D.; Frigaard, M.; Giebels, B.; Gillespie, S.; Godfrey, G.; Grove, J.E.; Handa, T.; Hansl-Kozanecka, T.; Hernando, J.; Hicks, M.; Hirayama, M.; Johnson, W.N.; Johnson, R.; Kamae, T.; Kroeger, W.; Lauben, D.; Lin, Y.C.; Lindner, T.; Michelson, P.; Moiseev, A.; Nikolaou, M.; Nolan, P.; Odian, A.; Ohsugi, T.; Ormes, J.; Paliaga, G.; Parkinson, P. Saz; Phlips, B.; Ritz, S.; Rock, S.; Russel, J.J.; Sadrozinski, H.; Schalk, T.; Silvis, J.; Szalata, Z.; Terrier, R.; Thompson, D.J.; Tournear, D.M.; Waite, A.P.; Wallace, J.; Williams, S.; Williamson, R.; Winker, G

    2001-11-21

    This paper describes the results of a beam test using the Engineering Model of the GLAST Large Area Telescope, which was installed in a beam of positrons, hadrons and tagged photons at SLAC. The performance of the four subsystems, Anti Coincidence Detector, Silicon Tracker, Calorimeter and Data Acquisition will be described.

  19. Results from the Beam Test of the Engineering Model of the GLAST Large Area Telescope

    Energy Technology Data Exchange (ETDEWEB)

    do Couto e Silva, Eduardo

    2000-11-03

    This paper describes the results of a beam test using the Engineering Model of the GLAST Large Area Telescope, which was installed in a beam of positrons, hadrons and tagged photons at SLAC. The performance of the four subsystems, Anti Coincidence Detector, Silicon Tracker, Calorimeter and Data Acquisition will be described.

  20. The Second Fermi Large Area Telescope Catalog of Gamma-Ray Pulsars

    NARCIS (Netherlands)

    Abdo, A.A.; et al., [Unknown; Hessels, J.

    2013-01-01

    This catalog summarizes 117 high-confidence ≥0.1 GeV gamma-ray pulsar detections using three years of data acquired by the Large Area Telescope (LAT) on the Fermi satellite. Half are neutron stars discovered using LAT data through periodicity searches in gamma-ray and radio data around LAT

  1. Nanotechnological Advances in Catalytic Thin Films for Green Large-Area Surfaces

    Directory of Open Access Journals (Sweden)

    Suzan Biran Ay

    2015-01-01

    Full Text Available Large-area catalytic thin films offer great potential for green technology applications in order to save energy, combat pollution, and reduce global warming. These films, either embedded with nanoparticles, shaped with nanostructuring techniques, hybridized with other systems, or functionalized with bionanotechnological methods, can include many different surface properties including photocatalytic, antifouling, abrasion resistant and mechanically resistive, self-cleaning, antibacterial, hydrophobic, and oleophobic features. Thus, surface functionalization with such advanced structuring methods is of significance to increase the performance and wide usage of large-area thin film coatings specifically for environmental remediation. In this review, we focus on methods to increase the efficiency of catalytic reactions in thin film and hence improve the performance in relevant applications while eliminating high cost with the purpose of widespread usage. However, we also include the most recent hybrid architectures, which have potential to make a transformational change in surface applications as soon as high quality and large area production techniques are available. Hence, we present and discuss research studies regarding both organic and inorganic methods that are used to structure thin films that have potential for large-area and eco-friendly coatings.

  2. Large-area Fabry-Perot modulator based on electro-optic polymers

    DEFF Research Database (Denmark)

    Benter, Nils; Bertram, Ralph Peter; Soergel, Elisabeth

    2006-01-01

    We present a large-area electro-optic Fabry-Perot modulator utilizing a photoaddressable bis-azo polymer placed between two dielectric mirrors with an open aperture of 2 cm. A modulation efficientcy of 1% at an effective modulation voltage of 20 V for a wavelength of 1.55 mymeter is demonstrated...

  3. Transverse charge transport through DNA oligomers in large-area molecular junctions

    NARCIS (Netherlands)

    Katsouras, I.; Piliego, C.; Blom, P.W.M.; Leeuw, D.M. de

    2013-01-01

    We investigate the nature of charge transport in deoxyribonucleic acid (DNA) using self-assembled layers of DNA in large-area molecular junctions. A protocol was developed that yields dense monolayers where the DNA molecules are not standing upright, but are lying flat on the substrate. As a result

  4. Single-grain Silicon Technology for Large Area X-ray Imaging

    NARCIS (Netherlands)

    Arslan, A.

    2015-01-01

    Digital flat panel X-ray imagers are currently using a-Si and poly-Si thin-film-transistors (TFTs). a-Si TFT permits the use of large area substrates, however, due to the amorphous nature, the carrier mobility is very low (<1 cm2/Vs). Poly-Si TFT improves the mobility (~150 cm2/Vs) but due to random

  5. Ny versjon av standarden ISO 15489

    Directory of Open Access Journals (Sweden)

    Herbjørn Andresen

    2016-09-01

    Full Text Available Standarden NS-ISO 15489-1:2016 er gjeldende norsk standard fra 1. juli 2016. Dette er andre versjon av ISO 15489, den første versjonen fra 2001 er ikke lenger gyldig. 2001-utgaven av ISO 15489 besto av to deler. Del 2, SN-ISO/TR 15489-2:2001 er trukket, slik at den nye ISO 15489 kun består av del 1. ISO 15489 var den første internasjonale Records Management-standarden, og har en funksjon som overordnet referansestandard for en voksende portefølje av senere standarder på tilgrensende områder. Denne artikkelen gjennomgår endringene i hovedtrekk, både i standarden ISO 15489 som sådan og i noen av de standardene som bygger videre på den.

  6. Large-area WSe2 electric double layer transistors on a plastic substrate

    KAUST Repository

    Funahashi, Kazuma

    2015-04-27

    Due to the requirements for large-area, uniform films, currently transition metal dichalcogenides (TMDC) cannot be used in flexible transistor industrial applications. In this study, we first transferred chemically grown large-area WSe2 monolayer films from the as-grown sapphire substrates to the flexible plastic substrates. We also fabricated electric double layer transistors using the WSe2 films on the plastic substrates. These transistors exhibited ambipolar operation and an ON/OFF current ratio of ∼104, demonstrating chemically grown WSe2 transistors on plastic substrates for the first time. This achievement can be an important first step for the next-generation TMDC based flexible devices. © 2015 The Japan Society of Applied Physics.

  7. Techno-economic assessment of novel vanadium redox flow batteries with large-area cells

    Science.gov (United States)

    Minke, Christine; Kunz, Ulrich; Turek, Thomas

    2017-09-01

    The vanadium redox flow battery (VRFB) is a promising electrochemical storage system for stationary megawatt-class applications. The currently limited cell area determined by the bipolar plate (BPP) could be enlarged significantly with a novel extruded large-area plate. For the first time a techno-economic assessment of VRFB in a power range of 1 MW-20 MW and energy capacities of up to 160 MWh is presented on the basis of the production cost model of large-area BPP. The economic model is based on the configuration of a 250 kW stack and the overall system including stacks, power electronics, electrolyte and auxiliaries. Final results include a simple function for the calculation of system costs within the above described scope. In addition, the impact of cost reduction potentials for key components (membrane, electrode, BPP, vanadium electrolyte) on stack and system costs is quantified and validated.

  8. Large-area epitaxial growth of MoSe2 via an incandescent molybdenum source

    Science.gov (United States)

    Kit Cheng, Man; Liang, Jing; Lai, Ying Hoi; Pang, Liang Xi; Liu, Yi; Shen, Jun Ying; Hou, Jian Qiang; He, Qing Lin; Chao Xu, Bo; Shu Chen, Jun; Wang, Gan; Liu, Chang; Lortz, Rolf; Keong Sou, Iam

    2017-11-01

    We have developed an incandescent Mo source to fabricate large-area single-crystalline MoSe2 thin films. The as-grown MoSe2 thin films were characterized using transmission electron microscopy, energy dispersive x-ray spectroscopy, atomic force microscopy, Raman spectroscopy, photoluminescence (PL), reflection high energy electron diffraction (RHEED) and angular resolved photoemission spectroscopy (ARPES). A new Raman characteristic peak at 1591 cm-1 was identified. Results from Raman spectroscopy, PL, RHEED and ARPES studies consistently reveal that large-area single crystalline mono-layer of MoSe2 could be achieved by this technique. This technique enjoys several advantages over conventional approaches and could be extended to the growth of other two-dimensional layered materials containing a low-vapor-pressure element.

  9. Calibration of atomic trajectories in a large-area dual-atom-interferometer gyroscope

    Science.gov (United States)

    Yao, Zhan-Wei; Lu, Si-Bin; Li, Run-Bing; Luo, Jun; Wang, Jin; Zhan, Ming-Sheng

    2018-01-01

    We propose and demonstrate a method for calibrating atomic trajectories in a large-area dual-atom-interferometer gyroscope. The atom trajectories are monitored by modulating and delaying the Raman transition, and they are precisely calibrated by controlling the laser orientation and the bias magnetic field. To improve the immunity to the gravity effect and the common phase noise, the symmetry and the overlap of two large-area atomic interference loops are optimized by calibrating the atomic trajectories and by aligning the Raman-laser orientations. The dual-atom-interferometer gyroscope is applied in the measurement of the Earth's rotation. The sensitivity is 1.2 ×10-6 rad s -1 Hz-1/2, and the long-term stability is 6.2 ×10-8 rad/s at 2000 s.

  10. Large-Area and High-Throughput PDMS Microfluidic Chip Fabrication Assisted by Vacuum Airbag Laminator

    Directory of Open Access Journals (Sweden)

    Shuting Xie

    2017-07-01

    Full Text Available One of the key fabrication steps of large-area microfluidic devices is the flexible-to-hard sheet alignment and pre-bonding. In this work, the vacuum airbag laminator (VAL which is commonly used for liquid crystal display (LCD production has been applied for large-area microfluidic device fabrication. A straightforward, efficient, and low-cost method has been achieved for 400 × 500 mm2 microfluidic device fabrication. VAL provides the advantages of precise alignment and lamination without bubbles. Thermal treatment has been applied to achieve strong PDMS–glass and PDMS–PDMS bonding with maximum breakup pressure of 739 kPa, which is comparable to interference-assisted thermal bonding method. The fabricated 152 × 152 mm2 microfluidic chip has been successfully applied for droplet generation and splitting.

  11. Large-area ultrathin films of reduced graphene oxide as a transparent and flexible electronic material.

    Science.gov (United States)

    Eda, Goki; Fanchini, Giovanni; Chhowalla, Manish

    2008-05-01

    The integration of novel materials such as single-walled carbon nanotubes and nanowires into devices has been challenging, but developments in transfer printing and solution-based methods now allow these materials to be incorporated into large-area electronics. Similar efforts are now being devoted to making the integration of graphene into devices technologically feasible. Here, we report a solution-based method that allows uniform and controllable deposition of reduced graphene oxide thin films with thicknesses ranging from a single monolayer to several layers over large areas. The opto-electronic properties can thus be tuned over several orders of magnitude, making them potentially useful for flexible and transparent semiconductors or semi-metals. The thinnest films exhibit graphene-like ambipolar transistor characteristics, whereas thicker films behave as graphite-like semi-metals. Collectively, our deposition method could represent a route for translating the interesting fundamental properties of graphene into technologically viable devices.

  12. The North American Large-Area Time-Coincidence Array (NALTA) Project

    Science.gov (United States)

    Kotlicki, A.; McDonald, W. J.; Pinfold, J. L.; Walden, P.; Waltham, C.; Yen, S.

    The Canada-Wide Network of Large Area Cosmic Ray Time Coincidence Array Telescopes (CANLACT) collaboration is the Canadian part of the North American LargeArea Time Coincidence Array (NALTA) project (NALTA website). Starting as ALTA (Alberta LTA) at the University of Alberta in 1996, the collaboration now includes seven Canadian institutions. The idea is to build a very large, if somewhat sparse, cosmic ray air-shower array using semi-autonomous detector modules placed in high schools, linked by the internet and GPS timing. It will provide the opportunity to search for time-correlated cosmic ray events over 100's or 1000's of km. This article gives an overview of the project from the technical and educational points of view, and we report the results of a long-baseline test of modules in Edmonton and Vancouver.

  13. High Sensitivity Terahertz Detection through Large-Area Plasmonic Nano-Antenna Arrays

    Science.gov (United States)

    Yardimci, Nezih Tolga; Jarrahi, Mona

    2017-01-01

    Plasmonic photoconductive antennas have great promise for increasing responsivity and detection sensitivity of conventional photoconductive detectors in time-domain terahertz imaging and spectroscopy systems. However, operation bandwidth of previously demonstrated plasmonic photoconductive antennas has been limited by bandwidth constraints of their antennas and photoconductor parasitics. Here, we present a powerful technique for realizing broadband terahertz detectors through large-area plasmonic photoconductive nano-antenna arrays. A key novelty that makes the presented terahertz detector superior to the state-of-the art is a specific large-area device geometry that offers a strong interaction between the incident terahertz beam and optical pump at the nanoscale, while maintaining a broad operation bandwidth. The large device active area allows robust operation against optical and terahertz beam misalignments. We demonstrate broadband terahertz detection with signal-to-noise ratio levels as high as 107 dB. PMID:28205615

  14. Uniformity of large-area bilayer graphene grown by chemical vapor deposition

    Science.gov (United States)

    Sheng, Yuewen; Rong, Youmin; He, Zhengyu; Fan, Ye; Warner, Jamie H.

    2015-10-01

    Graphene grown by chemical vapor deposition (CVD) on copper foils is a viable method for large area films for transparent conducting electrode (TCE) applications. We examine the spatial uniformity of large area films on the centimeter scale when transferred onto both Si substrates with 300 nm oxide and flexible transparent polyethylene terephthalate substrates. A difference in the quality of graphene, as measured by the sheet resistance and transparency, is found for the areas at the edges of large sheets that depends on the supporting boat used for the CVD growth. Bilayer graphene is grown with uniform properties on the centimeter scale when a flat support is used for CVD growth. The flat support provides consistent delivery of precursor to the copper catalyst for graphene growth. These results provide important insights into the upscaling of CVD methods for growing high quality graphene and its transfer onto flexible substrates for potential applications as a TCE.

  15. Very Large Area/Volume Microwave ECR Plasma and Ion Source

    Science.gov (United States)

    Foster, John E. (Inventor); Patterson, Michael J. (Inventor)

    2009-01-01

    The present invention is an apparatus and method for producing very large area and large volume plasmas. The invention utilizes electron cyclotron resonances in conjunction with permanent magnets to produce dense, uniform plasmas for long life ion thruster applications or for plasma processing applications such as etching, deposition, ion milling and ion implantation. The large area source is at least five times larger than the 12-inch wafers being processed to date. Its rectangular shape makes it easier to accommodate to materials processing than sources that are circular in shape. The source itself represents the largest ECR ion source built to date. It is electrodeless and does not utilize electromagnets to generate the ECR magnetic circuit, nor does it make use of windows.

  16. 3D-Printed Disposable Wireless Sensors with Integrated Microelectronics for Large Area Environmental Monitoring

    KAUST Repository

    Farooqui, Muhammad Fahad

    2017-05-19

    Large area environmental monitoring can play a crucial role in dealing with crisis situations. However, it is challenging as implementing a fixed sensor network infrastructure over large remote area is economically unfeasible. This work proposes disposable, compact, dispersible 3D-printed wireless sensor nodes with integrated microelectronics which can be dispersed in the environment and work in conjunction with few fixed nodes for large area monitoring applications. As a proof of concept, the wireless sensing of temperature, humidity, and H2S levels are shown which are important for two critical environmental conditions namely forest fires and industrial leaks. These inkjet-printed sensors and an antenna are realized on the walls of a 3D-printed cubic package which encloses the microelectronics developed on a 3D-printed circuit board. Hence, 3D printing and inkjet printing are uniquely combined in order to realize a low-cost, fully integrated wireless sensor node.

  17. The Anti-Coincidence Detector for the GLAST Large Area Telescope

    Energy Technology Data Exchange (ETDEWEB)

    Moiseev, A.A.; Hartman, R.C.; Ormes, J.F.; Thompson, D.J.; Amato, M.J.; Johnson, T.E.; Segal, K.N.; Sheppard, D.A.

    2007-03-23

    This paper describes the design, fabrication and testing of the Anti-Coincidence Detector (ACD) for the Gamma-ray Large Area Space Telescope (GLAST) Large Area Telescope (LAT). The ACD is LAT's first-level defense against the charged cosmic ray background that outnumbers the gamma rays by 3-5 orders of magnitude. The ACD covers the top and 4 sides of the LAT tracking detector, requiring a total active area of {approx}8.3 square meters. The ACD detector utilizes plastic scintillator tiles with wave-length shifting fiber readout. In order to suppress self-veto by shower particles at high gamma-ray energies, the ACD is segmented into 89 tiles of different sizes. The overall ACD efficiency for detection of singly charged relativistic particles entering the tracking detector from the top or sides of the LAT exceeds the required 0.9997.

  18. Large-Area All-Textile Pressure Sensors for Monitoring Human Motion and Physiological Signals.

    Science.gov (United States)

    Liu, Mengmeng; Pu, Xiong; Jiang, Chunyan; Liu, Ting; Huang, Xin; Chen, Libo; Du, Chunhua; Sun, Jiangman; Hu, Weiguo; Wang, Zhong Lin

    2017-11-01

    Wearable pressure sensors, which can perceive and respond to environmental stimuli, are essential components of smart textiles. Here, large-area all-textile-based pressure-sensor arrays are successfully realized on common fabric substrates. The textile sensor unit achieves high sensitivity (14.4 kPa -1 ), low detection limit (2 Pa), fast response (≈24 ms), low power consumption (<6 µW), and mechanical stability under harsh deformations. Thanks to these merits, the textile sensor is demonstrated to be able to recognize finger movement, hand gestures, acoustic vibrations, and real-time pulse wave. Furthermore, large-area sensor arrays are successfully fabricated on one textile substrate to spatially map tactile stimuli and can be directly incorporated into a fabric garment for stylish designs without sacrifice of comfort, suggesting great potential in smart textiles or wearable electronics. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. The spatial thickness distribution of metal films produced by large area pulsed laser deposition

    DEFF Research Database (Denmark)

    Pryds, Nini; Schou, Jørgen; Linderoth, Søren

    2007-01-01

    Thin films of metals have been deposited in the large-area Pulsed Laser Deposition (PLD) Facility at Riso National Laboratory. Thin films of Ag and Ni were deposited with laser pulses from an excimer laser at 248 nm with a rectangular beam spot at a fluence of 10 J/cm(2) on glass substrates of 127...... mm diameter positioned 80 turn from the target in vacuum. We have explored the distribution of deposited material on a stationary substrate from a fixed point of impact on the target relative to the substrate. In all cases the angular distribution of the deposited metal layers shows a distinct "flip...... utilized in an algorithm for production of films over large areas. (c) 2007 Elsevier B.V. All rights reserved....

  20. Extraordinary suppression of carrier scattering in large area graphene oxide films

    Energy Technology Data Exchange (ETDEWEB)

    Negishi, R., E-mail: negishi@ap.eng.osaka-u.ac.jp; Kobayashi, Y. [Department of Applied Physics, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871 (Japan)

    2014-12-22

    In this study, we find that thermal treatment in ethanol vapor has a remarkable suppression effect of carrier scattering occurring between reduced graphene oxide (rGO) flakes in large area films. We observe excellent electrical properties such as high carrier mobility (∼5 cm{sup 2}/Vs) and low sheet resistance (∼40 KΩ/□) for the rGO films. From the electrical conductivity analysis of large area rGO films using two-dimensional variable range hopping model and structural analysis using Raman spectra measured from the rGO films, we reveal that the significant effect is caused by the expansion of conjugated π-electron system in rGO flake due to the efficient restoration of graphitic structure.

  1. Development of a large-area Multigap RPC with adequate spatial resolution for muon tomography

    Science.gov (United States)

    Wang, J.; Wang, Y.; Wang, X.; Zeng, M.; Xie, B.; Han, D.; Lyu, P.; Wang, F.; Li, Y.

    2016-11-01

    We study the performance of a large-area 2-D Multigap Resistive Plate Chamber (MRPC) designed for muon tomography with high spatial resolution. An efficiency up to 98% and a spatial resolution of around 270 μ m are obtained in cosmic ray and X-ray tests. The performance of the MRPC is also investigated for two working gases: standard gas and pure Freon. The result shows that the MRPC working in pure Freon can provide higher efficiency and better spatial resolution.

  2. Detection efficiency evaluation for a large area neutron sensitive microchannel plate detector

    OpenAIRE

    Wang, Yiming; Yang, Yigang; Liu, Ren

    2015-01-01

    In this paper, the detection efficiency of a large area neutron sensitive microchannel plate detector has been evaluated. A 6LiF/ZnS detector was employed as the benchmark detector, the TOF spectra of these two detectors were simultaneously measured and the energy spectra were then deduced to calculate the detection efficiency curve of the nMCP detector. Tests show the detection efficiency@25.3 meV thermal neutron is 34% for this nMCP detector.

  3. Caustic Recycle from Hanford Tank Waste Using Large Area NaSICON Structures (LANS)

    Energy Technology Data Exchange (ETDEWEB)

    Fountain, Matthew S.; Sevigny, Gary J.; Balagopal, S.; Bhavaraju, S.

    2009-03-31

    This report presents the results of a 5-day test of an electrochemical bench-scale apparatus using a proprietary (NAS-GY) material formulation of a (Na) Super Ion Conductor (NaSICON) membrane in a Large Area NaSICON Structures (LANS) configuration. The primary objectives of this work were to assess system performance, membrane seal integrity, and material degradation while removing Na from Group 5 and 6 tank waste from the Hanford Site.

  4. A gas scintillation counter with imaging optics and large area UV-detector

    Energy Technology Data Exchange (ETDEWEB)

    Nickles, J. E-mail: nickles@hsb.uni-frankfurt.de; Braeuning, H.; Braeuning-Demian, A.; Dangendorf, V.; Breskin, A.; Chechik, R.; Rauschnabel, K.; Schmidt-Boecking, H

    2002-01-21

    We report on the improvements in the position sensitive readout of a xenon-filled gas scintillation proportional counter. Using an imaging optic for UV-light in the region of 170 nm, the position resolution could be improved by more than 30%. In addition, we have obtained first encouraging results for the use of the recently developed gas electron multiplier together with a CsI-photocathode as a large area UV-detector system.

  5. A gas scintillation counter with imaging optics and large area UV-detector

    CERN Document Server

    Nickles, J; Bräuning-Demian, A; Breskin, Amos; Chechik, R; Dangendorf, V; Rauschnabel, K; Schmidt-Böcking, H

    2002-01-01

    We report on the improvements in the position sensitive readout of a xenon-filled gas scintillation proportional counter. Using an imaging optic for UV-light in the region of 170 nm, the position resolution could be improved by more than 30%. In addition, we have obtained first encouraging results for the use of the recently developed gas electron multiplier together with a CsI-photocathode as a large area UV-detector system.

  6. Testing of a Neon Loop Heat Pipe for Large Area Cryocooling

    Science.gov (United States)

    Ku, Jentung; Robinson, Franklin Lee

    2014-01-01

    Cryocooling of large areas such as optics, detector arrays, and cryogenic propellant tanks is required for future NASA missions. A cryogenic loop heat pipe (CLHP) can provide a closed-loop cooling system for this purpose and has many advantages over other devices in terms of reduced mass, reduced vibration, high reliability, and long life. A neon CLHP was tested extensively in a thermal vacuum chamber using a cryopump as the heat sink to characterize its transient and steady performance and verify its ability to cool large areas or components. Tests conducted included loop cool-down from the ambient temperature, startup, power cycle, heat removal capability, loop capillary limit and recovery from a dry-out, low power operation, and long duration steady state operation. The neon CLHP demonstrated robust operation. The loop could be cooled from the ambient temperature to subcritical temperatures very effectively, and could start successfully by applying power to both the pump and evaporator without any pre-conditioning. It could adapt to changes in the pump power andor evaporator power, and reach a new steady state very quickly. The evaporator could remove heat loads between 0.25W and 4W. When the pump capillary limit was exceeded, the loop could resume its normal function by reducing the pump power. Steady state operations were demonstrated for up to 6 hours. The ability of the neon loop to cool large areas was therefore successfully verified.

  7. A new large area scintillator screen for X-ray imaging

    Energy Technology Data Exchange (ETDEWEB)

    Nagarkar, V.V. E-mail: vnagarkar@rmdinc.com; Miller, S.R.; Tipnis, S.V.; Lempicki, A.; Brecher, C.; Lingertat, H

    2004-01-01

    We report on the development of a new, large area, powdered scintillator screen based on Lu{sub 2}O{sub 3}(Eu). As reported earlier, the transparent ceramic form of this material has a very high density of 9.4 g/cm{sup 3}, a high light output comparable to that of CsI(Tl), and emits in a narrow spectral band centered at about 610 nm. Research into fabrication of this ceramic scintillator in a large area format is currently underway, however the process is not yet practical for large scale production. Here we have explored fabrication of large area screens using precursor powders from which the ceramics are fabricated. To date we have produced up to 16 x 16 cm{sup 2} area screens with thickness in the range of 18 mg/cm{sup 2}. This paper outlines the screen fabrication technique and presents its imaging performance in comparison with a commercial Gd{sub 2}O{sub 2}S:Tb (GOS) screen.

  8. Simulation-Based Optimization of Cure Cycle of Large Area Compression Molding for LED Silicone Lens

    Directory of Open Access Journals (Sweden)

    Min-Jae Song

    2015-01-01

    Full Text Available Three-dimensional heat transfer-curing simulation was performed for the curing process by introducing a large area compression molding for simultaneous forming and mass production for the lens and encapsulants in the LED molding process. A dynamic cure kinetics model for the silicone resin was adopted and cure model and analysis result were validated and compared through a temperature measurement experiment for cylinder geometry with cure model. The temperature deviation between each lens cavity could be reduced by implementing a simulation model on the large area compression mold and by optimizing the location of heat source. A two-step cure cycle was constructed to reduce excessive reaction peak at the initial stage and cycle time. An optimum cure cycle that could reduce cycle time by more than 29% compared to a one-step cure cycle by adjusting dwell temperature, heating rate, and dwell time was proposed. It was thus confirmed that an optimization of large area LED lens molding process was possible by using the present experiment and the finite element method.

  9. Large-area super-resolution optical imaging by using core-shell microfibers

    Science.gov (United States)

    Liu, Cheng-Yang; Lo, Wei-Chieh

    2017-09-01

    We first numerically and experimentally report large-area super-resolution optical imaging achieved by using core-shell microfibers. The particular spatial electromagnetic waves for different core-shell microfibers are studied by using finite-difference time-domain and ray tracing calculations. The focusing properties of photonic nanojets are evaluated in terms of intensity profile and full width at half-maximum along propagation and transversal directions. In experiment, the general optical fiber is chemically etched down to 6 μm diameter and coated with different metallic thin films by using glancing angle deposition. The direct imaging of photonic nanojets for different core-shell microfibers is performed with a scanning optical microscope system. We show that the intensity distribution of a photonic nanojet is highly related to the metallic shell due to the surface plasmon polaritons. Furthermore, large-area super-resolution optical imaging is performed by using different core-shell microfibers placed over the nano-scale grating with 150 nm line width. The core-shell microfiber-assisted imaging is achieved with super-resolution and hundreds of times the field-of-view in contrast to microspheres. The possible applications of these core-shell optical microfibers include real-time large-area micro-fluidics and nano-structure inspections.

  10. Ultrahigh Performance C60 Nanorod Large Area Flexible Photoconductor Devices via Ultralow Organic and Inorganic Photodoping

    Science.gov (United States)

    Saran, Rinku; Stolojan, Vlad; Curry, Richard J.

    2014-01-01

    One dimensional single-crystal nanorods of C60 possess unique optoelectronic properties including high electron mobility, high photosensitivity and an excellent electron accepting nature. In addition, their rapid large scale synthesis at room temperature makes these organic semiconducting nanorods highly attractive for advanced optoelectronic device applications. Here, we report low-cost large-area flexible photoconductor devices fabricated using C60 nanorods. We demonstrate that the photosensitivity of the C60 nanorods can be enhanced ~400-fold via an ultralow photodoping mechanism. The photodoped devices offer broadband UV-vis-NIR spectral tuneability, exhibit a detectivitiy >109 Jones, an external quantum efficiency of ~100%, a linear dynamic range of 80 dB, a rise time 60 µs and the ability to measure ac signals up to ~250 kHz. These figures of merit combined are among the highest reported for one dimensional organic and inorganic large-area planar photoconductors and are competitive with commercially available inorganic photoconductors and photoconductive cells. With the additional processing benefits providing compatibility with large-area flexible platforms, these devices represent significant advances and make C60 nanorods a promising candidate for advanced photodetector technologies. PMID:24853479

  11. Detection of Steel Fatigue Cracks with Strain Sensing Sheets Based on Large Area Electronics

    Directory of Open Access Journals (Sweden)

    Yao Yao

    2015-04-01

    Full Text Available Reliable early-stage damage detection requires continuous monitoring over large areas of structure, and with sensors of high spatial resolution. Technologies based on Large Area Electronics (LAE can enable direct sensing and can be scaled to the level required for Structural Health Monitoring (SHM of civil structures and infrastructure. Sensing sheets based on LAE contain dense arrangements of thin-film strain sensors, associated electronics and various control circuits deposited and integrated on a flexible polyimide substrate that can cover large areas of structures. This paper presents the development stage of a prototype strain sensing sheet based on LAE for crack detection and localization. Two types of sensing-sheet arrangements with size 6 × 6 inch (152 × 152 mm were designed and manufactured, one with a very dense arrangement of sensors and the other with a less dense arrangement of sensors. The sensing sheets were bonded to steel plates, which had a notch on the boundary, so the fatigue cracks could be generated under cyclic loading. The sensors within the sensing sheet that were close to the notch tip successfully detected the initialization of fatigue crack and localized the damage on the plate. The sensors that were away from the crack successfully detected the propagation of fatigue cracks based on the time history of the measured strain. The results of the tests have validated the general principles of the proposed sensing sheets for crack detection and identified advantages and challenges of the two tested designs.

  12. Measurement of LED chips using a large-area silicon photodiode.

    Science.gov (United States)

    Chou, Pei-Ting; Ying, Shang-Ping; Chen, Tzung-Te; Fu, Han-Kuei; Wang, Chien-Ping; Lee, Chih-Kung

    2014-10-10

    We propose the output power measurement of bare-wafer/chip light-emitting diodes (LEDs) using a large-area silicon (Si) photodiode with a simple structure and high accuracy relative to the conventional partial flux measurement using an integrating sphere. To obtain the optical characteristics of the LED chips measured using the two methods, three-dimensional ray-trace simulations are used to perform the measurement deviations owing to the chip position offset or tilt angle. The ray-tracing simulation results demonstrate that the deviation of light remaining in the integrating sphere is approximately 65% for the vertical LED chip and 53% for the flip-chip LED chip if the measurement distance in partial flux method is set to be 5-40 mm. By contrast, the deviation of light hitting the photodiode is only 15% for the vertical LED chip and 23% for the flip-chip LED chip if the large-area Si photodiode is used to measure the output power with the same measurement distance. As a result, the large-area Si photodiode method practically reduces the output power measurement deviations of the bare-wafer/chip LED, so that a high-accuracy measurement can be achieved in the mass production of the bare-wafer/chip LED without the complicated integrating sphere structure.

  13. [Scalp expanded flap combined with IPL hair removal for large area scar on forehead].

    Science.gov (United States)

    Peng, Wang; Hongwei, You; Li, Chen; Hui, Gong; Xia, Yan; Hua, Lu; Li, Zhao

    2015-09-01

    To investigate the therapeutic effect of scalp expanded flap combined with JPL hair removal for large area scar on forehead. From Jul. 2010 to Nov. 2012, 9 cases with large area scar on forehead received treatment of adjacent scalp expanded flap combined with JPL hair removal. One the first stage, the expander was implanted under the scalp near the forehead scar, followed hy expansion process. When the expansion was completed, the expanded flap was transferred to cover the wound after scar excision. 10 days after flap transposition, the forehead hair line was designed and extra hair on flap underwent JPL hair removal. After 3-5 treatments, the hair on flap was almost removed. All the scalp flaps survived completely. JPL hair removal had exact effect. The patients were followed up for 5-11 months. The hair density on the flap decreased hy more than 90%. The flap had a good match with surrounding facial skin in color, texture and thickness. The reconstructed forehead hair line was satisfactory. It is a good option to reconstruct large area scar on forehead with scalp expanded flap comhined with IPL hair removal.

  14. Simple room-temperature preparation of high-yield large-area graphene oxide.

    Science.gov (United States)

    Huang, N M; Lim, H N; Chia, C H; Yarmo, M A; Muhamad, M R

    2011-01-01

    Graphene has attracted much attention from researchers due to its interesting mechanical, electrochemical, and electronic properties. It has many potential applications such as polymer filler, sensor, energy conversion, and energy storage devices. Graphene-based nanocomposites are under an intense spotlight amongst researchers. A large amount of graphene is required for preparation of such samples. Lately, graphene-based materials have been the target for fundamental life science investigations. Despite graphene being a much sought-after raw material, the drawbacks in the preparation of graphene are that it is a challenge amongst researchers to produce this material in a scalable quantity and that there is a concern about its safety. Thus, a simple and efficient method for the preparation of graphene oxide (GO) is greatly desired to address these problems. In this work, one-pot chemical oxidation of graphite was carried out at room temperature for the preparation of large-area GO with ~100% conversion. This high-conversion preparation of large-area GO was achieved using a simplified Hummer's method from large graphite flakes (an average flake size of 500 μm). It was found that a high degree of oxidation of graphite could be realized by stirring graphite in a mixture of acids and potassium permanganate, resulting in GO with large lateral dimension and area, which could reach up to 120 μm and ~8000 μm(2), respectively. The simplified Hummer's method provides a facile approach for the preparation of large-area GO.

  15. International Organization for Standardization (ISO) 15189

    OpenAIRE

    Schneider, Frank; Maurer, Caroline; Friedberg, Richard C.

    2017-01-01

    The College of American Pathologists (CAP) offers a suite of laboratory accreditation programs, including one specific to accreditation to the international organization for standardization (ISO) 15189 standard for quality management specific to medical laboratories. CAP leaders offer an overview of ISO 15189 including its components, internal audits, occurrence management, document control, and risk management. The authors provide a comparison of its own ISO 15189 program, CAP 15189, to the ...

  16. Sistemas de referencia e identificadores geográficos (ISO 19111, ISO 19112, ISO 6709)

    OpenAIRE

    Sevilla, Miguel J.; Iguácel Abeigón, Cristina; Abad Power, Paloma

    2008-01-01

    Para la familia de normas ISO 19100 describir de manera normalizada, consistente, no ambigua y eficaz posiciones geográficas, es decir posiciones relativas a la superficie terrestre, es fundamental. El posicionamiento es el rasgo diferenciador de la IG, y su normalización un elemento clave para la interoperabilidad de los sistemas. Por ello, se trata de un aspecto esencial y, en ese sentido pueden considerarse básicas las normas que atañen a este propósito de una manera más dir...

  17. International Organization for Standardization (ISO) 15189.

    Science.gov (United States)

    Schneider, Frank; Maurer, Caroline; Friedberg, Richard C

    2017-09-01

    The College of American Pathologists (CAP) offers a suite of laboratory accreditation programs, including one specific to accreditation to the international organization for standardization (ISO) 15189 standard for quality management specific to medical laboratories. CAP leaders offer an overview of ISO 15189 including its components, internal audits, occurrence management, document control, and risk management. The authors provide a comparison of its own ISO 15189 program, CAP 15189, to the CAP Laboratory Accreditation Program. The authors conclude with why laboratories should use ISO 15189. © The Korean Society for Laboratory Medicine.

  18. Simple room-temperature preparation of high-yield large-area graphene oxide

    Science.gov (United States)

    Huang, NM; Lim, HN; Chia, CH; Yarmo, MA; Muhamad, MR

    2011-01-01

    Graphene has attracted much attention from researchers due to its interesting mechanical, electrochemical, and electronic properties. It has many potential applications such as polymer filler, sensor, energy conversion, and energy storage devices. Graphene-based nanocomposites are under an intense spotlight amongst researchers. A large amount of graphene is required for preparation of such samples. Lately, graphene-based materials have been the target for fundamental life science investigations. Despite graphene being a much sought-after raw material, the drawbacks in the preparation of graphene are that it is a challenge amongst researchers to produce this material in a scalable quantity and that there is a concern about its safety. Thus, a simple and efficient method for the preparation of graphene oxide (GO) is greatly desired to address these problems. In this work, one-pot chemical oxidation of graphite was carried out at room temperature for the preparation of large-area GO with ~100% conversion. This high-conversion preparation of large-area GO was achieved using a simplified Hummer’s method from large graphite flakes (an average flake size of 500 μm). It was found that a high degree of oxidation of graphite could be realized by stirring graphite in a mixture of acids and potassium permanganate, resulting in GO with large lateral dimension and area, which could reach up to 120 μm and ~8000 μm2, respectively. The simplified Hummer’s method provides a facile approach for the preparation of large-area GO. PMID:22267928

  19. Flight Qualification And Production Results With Large Area Space Solar Cells And Panel Assembly

    Science.gov (United States)

    Sharma, S. K.; Hanley, James; Jun, Bogim; Bardfield, Rina; Stone, Beth

    2011-10-01

    Spectrolab's product roadmap provides improvement in product performance in parallel with continuous cost reduction to maintain competitive standing in our industry. Product performance improvement is achieved by developing higher efficiency solar cells (e.g. 29.5% XTJ and 33% IMM cells).Reduced product cost is achieved historically through a variety of means including yield improvements, direct material cost reductions, process changes, and most recently, a transition to large area cell configurations (e.g. "LEONE" at 59.65 cm2). Spectrolab has successfully completed the qualification of its latest triple junction space solar cell, the 29.5% 2 XTJ (26.62 cm ), per AIAA-S-111-2005 - augmented by additional Spectrolab testing. Large area LEONE UTJ and XTJ cells (59.65 cm2 from 100 mm diameter germanium wafer) have also been qualified. Use of these large area cells has resulted in the reduction of solar panel cost, add-on mass and manufacturing cycle time for programs. This evolution to larger area cells is the result of a strategic cost reduction effort initiated in 2006; the first step of which was to manufacture the largest possible cells (LEONE) using the 100 mm germanium (Ge) wafer. In flight production since 2007, the LEONE UTJ cell has now completed rigorous qualification testing to 15,549 GEO (Geosynchronous orbit) and 66,060 LEO (Low Earth Orbit) thermal cycles. Over 53,000 LEONE UTJ cells, including more than 27,000 cells on panels delivered to flight programs, have been produced to date. The on-orbit performance of the LEONE UTJ cells is nominal. Finally, progress on the second step of our strategic cost reduction effort towards larger cells and less piece part handling is presented. This effort involves the establishment of a 150 mm Ge -based manufacturing infrastructure.

  20. IsoBank workshop held at IsoEcol10 - University of Tokyo 2016

    OpenAIRE

    Hayden, Brian

    2016-01-01

    IsoBank is a repository for stable isotope values and relevant metadata. These slides were presented at a workshop held during IsoEcol10 to refine and design the IsoBank for the needs of a diverse group of researchers.

  1. Effects of electrolyte gating on photoluminescence spectra of large-area WSe2monolayer films

    KAUST Repository

    Matsuki, Keiichiro

    2016-05-24

    We fabricated electric double-layer transistors comprising large-area WSe2 monolayers and investigated the effects of electrolyte gating on their photoluminescence (PL) spectra. Using the efficient gating effects of electric double layers, we succeeded in the application of a large electric field (>107Vcm%1) and the accumulation of high carrier density (>1013cm%2). As a result, we observed PL spectra based on both positively and negatively charged excitons and their gate-voltage-dependent redshifts, suggesting the effects of both an electric field and charge accumulation. © 2016 The Japan Society of Applied Physics.

  2. Large-area thin self-supporting carbon foils with MgO coatings

    CERN Document Server

    Stolarz, A

    2002-01-01

    Large area self-supporting carbon foils in the thickness of range of 8-22 mu g/cm sup 2 , coated with approximately 4 mu g/cm sup 2 MgO have been prepared by e-gun evaporation. They were mounted on frames with apertures of 130 cm sup 2. Problems related to the parting agent preparation, floating procedure, and mounting onto frames are discussed. Special precautions necessary to avoid damage during foil drying, storage and transportation are suggested.

  3. Trends in the development of large area photon detectors for Cherenkov light imaging applications

    CERN Document Server

    Nappi, E

    2003-01-01

    Since the successful operations of hi-tech devices at OMEGA, DELPHI and SLD, the technique of Cherenkov light imaging has gone through an impressive and fruitful evolution driven by the conception of novel large area photon detectors. The well-assessed potentialities of thin CsI films, employed as reflective photoconverters in gas counters operated at atmospheric pressure, will be compared with the promising features of hybrid and multianode vacuum photomultipliers. Recently proposed single-photon gaseous detectors based on GEMs will also be reviewed.

  4. Chemically derived graphene oxide: towards large-area thin-film electronics and optoelectronics.

    Science.gov (United States)

    Eda, Goki; Chhowalla, Manish

    2010-06-11

    Chemically derived graphene oxide (GO) possesses a unique set of properties arising from oxygen functional groups that are introduced during chemical exfoliation of graphite. Large-area thin-film deposition of GO, enabled by its solubility in a variety of solvents, offers a route towards GO-based thin-film electronics and optoelectronics. The electrical and optical properties of GO are strongly dependent on its chemical and atomic structure and are tunable over a wide range via chemical engineering. In this Review, the fundamental structure and properties of GO-based thin films are discussed in relation to their potential applications in electronics and optoelectronics.

  5. Chemically exfoliated large-area two-dimensional flakes of molybdenum disulfide for device applications

    Directory of Open Access Journals (Sweden)

    Vivek Pachauri

    2013-09-01

    Full Text Available A solution-based exfoliation method for obtaining large-area two-dimensional flakes of molybdenum disulfide, followed by the fabrication of electrical devices is presented in this manuscript. The exfoliation method is based on the use of an aprotic solvent, namely, acetonitrile under mild sonication steps. In order to fabricate devices, a dielectrophoresis technique is used for transferring MoS2 flakes site-specifically on to the electrode pairs pre-written on the glass chips. The devices fabricated thus can be operated as chemical sensor in liquids while investigations under photo illumination indicate that such devices can also efficiently function as photodetectors.

  6. Highly segmented large-area hybrid photodiodes with bialkali photocathodes and enclosed VLSI readout electronics

    CERN Document Server

    Braem, André; Filthaut, Frank; Go, A; Joram, C; Weilhammer, Peter; Wicht, P; Dulinski, W; Séguinot, Jacques; Wenzel, H; Ypsilantis, Thomas

    2000-01-01

    We report on the principles, design, fabrication, and operation of a highly segmented, large-area hybrid photodiode, which is being developed in the framework of the LHCb RICH project. The device consists of a cylindrical, 127 mm diameter vacuum envelope capped with a spherical borosilicate UV-glass entrance window, with an active-to-total-area fraction of 81A fountain-focusing electron optics is used to demagnify the image onto a 50 mm diameter silicon sensor, containing 2048 pads of size 1*1 mm/sup 2/. (10 refs).

  7. Fermi Large Area Telescope Observations of the Dark Accelerator HESS J1745-303

    Directory of Open Access Journals (Sweden)

    Paul Yeung

    2016-12-01

    Full Text Available Reviewing the two MeV-GeV investigations in the field of the HESS J1745-303 performed using Fermi Large Area Telescope data, we confirmed that the emission peak comfortably coincides with ‘Region A’ in the TeV regime, which is the brightest part of this feature. The MeV–TeV spectrum can be precisely described by a single power-law. Also, recent investigation has shown that the MeV-GeV feature is elongated from ‘Region A’ toward the north-west, which is similar to the case of largescale atomic/molecular gas distribution.

  8. Replication fidelity assessment of large area sub-μm structured polymer surfaces using scatterometry

    DEFF Research Database (Denmark)

    Calaon, M.; Madsen, M. H.; Weirich, J.

    2015-01-01

    for later injection moulding of Cyclic-olefin-copolymer (COC) substrate were the sub-μm features where ultimately transferred. The scatterometry system was validated using calibrated atomic force microscopy measurements and a model based on scalar diffraction theory employed to calculate the expected......The present study addresses one of the key challenges in the product quality control of transparent structured polymer substrates, the replication fidelity of sub-μm structures over a large area. Additionally the work contributes to the development of new techniques focused on in...

  9. Investigation of large area semiconductor strip detectors for use in low energy nuclear physics

    Energy Technology Data Exchange (ETDEWEB)

    Scholz, N.; Dennert, H.; Eyrich, W.; Lehmann, A.; Moosburger, M.; Wirth, H. (Physikalisches Inst., Univ. Erlangen-Nuernberg (Germany))

    1992-03-01

    Commercial large area ion implanted semiconductor strip detectors were investigated in respect of depletion behaviour, using the 8 MeV-proton beam of the Erlangen Tandem Accelerator. A characteristic resistivity profile of the n-type silicon detector material was observed. The semiconductor counters were used in a coincidence experiment for detecting charged decay particles from the ({sup 6}Li, {sup 6}He p) reaction on {sup 12}C. Covering a total solid angle of 330 msr, they allowed the simultaneous measurement of a large number of angles. (orig.).

  10. Large area BGO scintillator detectors for the study of hot nuclei GDR

    CERN Document Server

    Zhang Bao Guo; Duan Li Min; Wen Wan Xin; Jin Ge; Li Zu Yu; Xiao Zhi Gang; Wang Hong Wei

    2002-01-01

    The author reports two large area BGO scintillator detectors that were successfully used to study the Giant Dipole Resonance (GDR) of hot nuclei. Time of Flight was used to separate gamma rays from fast neutrons. The energy calibration of the BGO detectors was obtained by using the 7.4 MeV and 10.2 MeV gamma rays originating from slow neutron capture in Ge isotopes. The EGS4 code was used to simulate the responding of BGO detector to high energy gamma rays

  11. Period doubling and chaos in large area Josephson junctions induced by rf signals

    DEFF Research Database (Denmark)

    Olsen, O. H.; Samuelsen, Mogens Rugholm

    1985-01-01

    . In the intermediate regime lower and upper threshold values (for the amplitude) for transition to chaos are found. Feigenbaum period doubling (period-doubling bifurcation cascade) appears when chaos is approached for increasing amplitude. The findings are supported experimentally. Applied Physics Letters......The influence of an applied rf signal on the emitted radiation from a large area Josephson junction is examined. A model of the system is presented in the framework of the one-dimensional sine-Gordon equation. The model linearizes for small and large values of the amplitude of the applied signal...... is copyrighted by The American Institute of Physics....

  12. Thick and large area PIN diodes for hard X-ray astronomy

    CERN Document Server

    Ota, N; Sugizaki, M; Kaneda, M; Tamura, T; Ozawa, H; Kamae, T; Makishima, K; Takahashi, T; Tashiro, M; Fukazawa, Y; Kataoka, J; Yamaoka, K; Kubo, S; Tanihata, C; Uchiyama, Y; Matsuzaki, K; Iyomoto, N; Kokubun, M; Nakazawa, T; Kubota, A; Mizuno, T; Matsumoto, Y; Isobe, N; Terada, Y; Sugiho, M; Onishi, T; Kubo, H; Ikeda, H; Nomachi, M; Ohsugi, T; Muramatsu, M; Akahori, H

    1999-01-01

    Thick and large area PIN diodes for the hard X-ray astronomy in the 10-60 keV range are developed. To cover this energy range in a room temperature and in a low background environment, Si PIN junction diodes of 2 mm in thickness with 2.5 cm sup 2 in effective area were developed, and will be used in the bottom of the Phoswich Hard X-ray Detector (HXD), on-board the ASTRO-E satellite. Problems related to a high purity Si and a thick depletion layer during our development and performance of the PIN diodes are presented in detail.

  13. Large-area graphene films by simple solution casting of edge-selectively functionalized graphite.

    Science.gov (United States)

    Bae, Seo-Yoon; Jeon, In-Yup; Yang, Jieun; Park, Noejung; Shin, Hyeon Suk; Park, Sungjin; Ruoff, Rodney S; Dai, Liming; Baek, Jong-Beom

    2011-06-28

    We report edge-selective functionalization of graphite (EFG) for the production of large-area uniform graphene films by simply solution-casting EFG dispersions in dichloromethane on silicon oxide substrates, followed by annealing. The resultant graphene films show ambipolar transport properties with sheet resistances of 0.52-3.11 kΩ/sq at 63-90% optical transmittance. EFG allows solution processing methods for the scalable production of electrically conductive, optically transparent, and mechanically robust flexible graphene films for use in practice.

  14. Microfabrication of large-area circular high-stress silicon nitride membranes for optomechanical applications

    Directory of Open Access Journals (Sweden)

    E. Serra

    2016-06-01

    Full Text Available In view of the integration of membrane resonators with more complex MEMS structures, we developed a general fabrication procedure for circular shape SiNx membranes using Deep Reactive Ion Etching (DRIE. Large area and high-stress SiNx membranes were fabricated and used as optomechanical resonators in a Michelson interferometer, where Q values up to 1.3 × 106 were measured at cryogenic temperatures, and in a Fabry-Pérot cavity, where an optical finesse up to 50000 has been observed.

  15. Long pulse large area beam extraction with a rf driven H-/D- sourcea)

    Science.gov (United States)

    Kraus, W.; Falter, H.-D.; Fantz, U.; Franzen, P.; Heinemann, B.; McNeely, P.; Riedl, R.; Speth, E.

    2008-02-01

    IPP Garching is heavily involved in the development of the rf driven H-/D- ion source for the ITER NBI. After the successful demonstration of the required physical parameters, the experimental conditions have been extended to long pulses and large area beam extraction. This paper contains descriptions of the source and power supply modifications necessitated for long pulses as well as the latest results including the first 1h pulse. Suppression of the coextracted electron current is a key issue. Experiments with potential control, different magnetic filter fields, and cesium handling to suppress the electrons and stabilize the currents are also reported.

  16. Enhancing Technology Education Students' Understanding of ISO 9000.

    Science.gov (United States)

    Harding, Kerry A.; Tesolowski, Dennis G.; Simmons, J. Bryan

    2000-01-01

    Defines ISO 9000, the quality control standard of the International Organization for Standardization (ISO), and looks at the benefits of ISO certification. Looks at the four levels of ISO 9000 and discusses the construction of training courses to prepare ISO documentation. (JOW)

  17. Validation of Microbiological methods; Enumeration of Clostridium perfringens according to ISO 7937 (second edition, 1997)

    NARCIS (Netherlands)

    Schulten SM; Benschop E; Nagelkerke NJD; Mooijman KA; MGB; IMA

    2001-01-01

    The method for the enumeration of Clostridium perfringens in foods and animal feeding stuffs, as described in ISO 7937 (1997), was validated in the context of a European project. A collaborative study was organised with the aim of attaining precision, in terms of repeatability (r)

  18. Maximizing Value for Training with ISO 9000.

    Science.gov (United States)

    Russo, C. W. Russ; Russo, Tracy Callaway

    1996-01-01

    The International Organization for Standardization (ISO) has created quality assurance guidelines that help technology trainers and educators manage and organize training programs. This article briefly outlines program design principles, emphasizing needs analysis and outcome evaluation, performance documentation, and process management. ISO 9000…

  19. Documenting an ISO 9000 Quality System.

    Science.gov (United States)

    Fisher, Barry

    1995-01-01

    Discusses six steps to follow when documenting an ISO 9000 quality system: using ISO 9000 to develop a quality system, identifying a company's business processes, analyzing the business processes; describing the procedures, writing the quality manual, and working to the documented procedures. (SR)

  20. Implementation and Impact of ISO 9001

    NARCIS (Netherlands)

    B. Manders (Basak)

    2015-01-01

    markdownabstract__Abstract __ The ISO 9001 quality management standard has been implemented by more than one million organizations in 187 countries since its introduction in 1987. A newer version of ISO 9001 is planned to be introduced in 2015. Even though it is widely used by organizations to

  1. Gamma Ray Large Area Space Telescope (GLAST) Balloon Flight Engineering Model: Overview

    Science.gov (United States)

    Thompson, D. J.; Godfrey, G.; Williams, S. M.; Grove, J. E.; Mizuno, T.; Sadrozinski, H. F.-W.; Kamae, T.; Ampe, J.; Briber, Stuart; Dann, James; hide

    2001-01-01

    The Gamma Ray Large Area Space Telescope (GLAST) Large Area Telescope (LAT) is a pair-production high-energy (greater than 20 MeV) gamma-ray telescope being built by an international partnership of astrophysicists and particle physicists for a satellite launch in 2006, designed to study a wide variety of high-energy astrophysical phenomena. As part of the development effort, the collaboration has built a Balloon Flight Engineering Model (BFEM) for flight on a high-altitude scientific balloon. The BFEM is approximately the size of one of the 16 GLAST-LAT towers and contains all the components of the full instrument: plastic scintillator anticoincidence system (ACD), high-Z foil/Si strip pair-conversion tracker (TKR), CsI hodoscopic calorimeter (CAL), triggering and data acquisition electronics (DAQ), commanding system, power distribution, telemetry, real-time data display, and ground data processing system. The principal goal of the balloon flight was to demonstrate the performance of this instrument configuration under conditions similar to those expected in orbit. Results from a balloon flight from Palestine, Texas, on August 4, 2001, show that the BFEM successfully obtained gamma-ray data in this high-background environment.

  2. Large-area uniform electron doping of graphene by Ag nanofilm

    Directory of Open Access Journals (Sweden)

    Xiaopeng Guo

    2017-04-01

    Full Text Available Graphene has attracted much attention at various research fields due to its unique optical, electronic and mechanical properties. Up to now, graphene has not been widely used in optoelectronic fields due to the lack of large-area uniform doped graphene (n-doped and p-doped with smooth surface. Therefore, it is rather desired to develop some effective doping methods to extend graphene to optoelectronics. Here we developed a novel doping method to prepare large-area (> centimeter scale uniform doped graphene film with a nanoscale roughness(RMS roughness ∼1.4 nm, the method (nano-metal film doping method is simple but effective. Using this method electron doping (electron-injection may be easily realized by the simple thermal deposition of Ag nano-film on a transferred CVD graphene. The doping effectiveness has been proved by Raman spectroscopy and spectroscopic ellipsometry. Importantly, our method sheds light on some potential applications of graphene in optoelectronic devices such as photodetectors, LEDs, phototransistors, solar cells, lasers etc.

  3. Large area crystallization of amorphous Si with overlapping high repetition rate laser pulses

    KAUST Repository

    Ryu, Sang-Gil

    2012-09-01

    This paper presents a pulsed laser crystallization technique, enabling large area crystallization of amorphous Si to produce grains having well-defined size and orientation. The method is developed by first determining the parameters influencing crystallization induced by single laser pulses of circular cross-sectional profile. In a second step, crystallization by overlapping round spots is examined. The experiments reveal three zones characterized by distinctly different crystallized morphologies following the laser irradiation. One of these zones corresponds to the regime of lateral crystal growth, wherein grains are driven towards the center of the spot by the radial temperature gradient. These findings are then applied to processing via line beam profiles that facilitate large area crystallization upon rapid translation of the specimen. Crystallization of extended areas hinges on the determination of the crystal growth length for a single spot. The pitch between successive pulses is then set on the basis of this information. It is shown that the pulse energy has only a weak effect on the crystal growth length. © 2012 Elsevier B.V.

  4. Ferroelectricity and the phase transition in large area evaporated vinylidene fluoride oligomer thin films

    Science.gov (United States)

    Foreman, K.; Poddar, Shashi; Ducharme, Stephen; Adenwalla, S.

    2017-05-01

    Organic ferroelectric materials, including the well-known poly(vinylidene fluoride) and its copolymers, have been extensively studied and used for a variety of applications. In contrast, the VDF oligomer has not been thoroughly investigated and is not widely used, if used at all. One key advantage the oligomer has over the polymer is that it can be thermally evaporated in vacuum, allowing for the growth of complex heterostructures while maintaining interfacial cleanliness. Here, we report on the ferroelectric properties of high-quality VDF oligomer thin films over relatively large areas on the order of mm2. The operating temperature is identified via differential scanning calorimetry and pyroelectric measurements. Pyroelectric measurements also reveal a stable remanent polarization for these films which persists over very long time scales, an important result for non-volatile data storage. Temperature dependent pyroelectric and capacitance measurements provide compelling evidence for the phase transition in these films. Capacitance-voltage and current-voltage measurements are used to confirm ferroelectricity, quantify the dielectric loss, and calculate the spontaneous polarization. Finally, piezoresponse force microscopy is used to demonstrate large area, low-voltage ferroelectric domain reading/writing in VDF oligomer thin films. This work enables new channels for VDF oligomer applications and research.

  5. Research progress on large-area perovskite thin films and solar modules

    Directory of Open Access Journals (Sweden)

    Zhichun Yang

    2017-12-01

    Full Text Available Organometal halide perovskites have exhibited a bright future as photovoltaic semiconductor in next generation solar cells due to their unique and promising physicochemical properties. Over the past few years, we have witnessed a tremendous progress of efficiency record evolution of perovskite solar cells (PSCs. Up to now, the highest efficiency record of PSCs has reached 22.1%; however, it was achieved at a very small device area of <0.1 cm2. With the device area increasing to mini-module scale, the efficiency record dropped dramatically. The inherent causes are mainly ascribed to inadequate quality control of large-area perovskite thin films and insufficient optimization of solar module design. In current stage of PSCs research and development, to overcome these two obstacles is in urgent need before this new technology could realize scale-up industrialization. Herein, we present an overview of recently developed strategies for preparing large-area perovskite thin films and perovskite solar modules (PSMs. At last, cost analysis and future application directions of PSMs have also been discussed.

  6. Facile electrochemical transfer of large-area single crystal epitaxial graphene from Ir(1 1 1)

    DEFF Research Database (Denmark)

    Koefoed, Line; Kongsfelt, Mikkel; Ulstrup, Søren

    2015-01-01

    High-quality growth of graphene and subsequent reliable transfer to insulating substrates are needed for various technological applications, such as flexible screens and high speed electronics. In this paper, we present a new electrochemical method for the transfer of large-area, high-quality sin......High-quality growth of graphene and subsequent reliable transfer to insulating substrates are needed for various technological applications, such as flexible screens and high speed electronics. In this paper, we present a new electrochemical method for the transfer of large-area, high......-quality single crystalline graphene from Ir(1 1 1) to Si/SiO2 under ambient conditions. The method is based on intercalation of tetraoctylammonium ions between the graphene layer and the Ir surface. This simple technique allows transfer of graphene single crystals having the same size as the substrate...... they are grown on (diameter ≈7 mm). In addition, the substrate can be reused for further growth cycles. A detailed Raman map analysis of the transferred graphene reveals straight lines, in which the Raman peaks characteristic for graphene are shifted. These lines originate from scratches in the Ir(1 1 1) crystal...

  7. Large Area Co-Assembly of Nanowires for Flexible Transparent Smart Windows.

    Science.gov (United States)

    Wang, Jin-Long; Lu, Yi-Ruo; Li, Hui-Hui; Liu, Jian-Wei; Yu, Shu-Hong

    2017-07-26

    Electrochromic devices with controllable color switching, low cost, and energy-saving advantages have been widely used as smart windows, rear-view car mirrors, displays, and so on. However, the devices are seriously limited for flexible electronics as they are traditionally fabricated on indium tin oxide (ITO) substrates which will lose their conductivity after bending cycles (the resistance significantly changed from 200 Ω to 6.56 MΩ when the bending radius was 1.2 cm). Herein, we report a new route for large area coassembly of nanowires (NWs), resulting in the formation of multilayer ordered nanowire (NW) networks with tunable conductivity (7-40 Ω/sq) and transmittance (58-86% at 550 nm) for fabrication of flexible transparent electrochromic devices, showing good stability of electrochromic switching behaviors. The electrochromic performance of the devices can be tuned and is strongly dependent on the structures of the Ag and W18O49 NW assemblies. Unlike the ITO-based electronics, the electrochromic films can be bent to a radius of 1.2 cm for more than 1000 bending cycles without obvious failure of both conductivity (ΔR/R ≈ 8.3%) and electrochromic performance (90% retention), indicating the excellent mechanical flexibility. The present method for large area coassembly of NWs can be extended to fabricate various NW-based flexible devices in the future.

  8. A Large Area Tactile Sensor Patch Based on Commercial Force Sensors

    Directory of Open Access Journals (Sweden)

    Alfonso García-Cerezo

    2011-05-01

    Full Text Available This paper reports the design of a tactile sensor patch to cover large areas of robots and machines that interact with human beings. Many devices have been proposed to meet such a demand. These realizations are mostly custom-built or developed in the lab. The sensor of this paper is implemented with commercial force sensors. This has the benefit of a more foreseeable response of the sensor if its behavior is understood as the aggregation of readings from all the individual force sensors in the array. A few reported large area tactile sensors are also based on commercial sensors. However, the one in this paper is the first of this kind based on the use of polymeric commercial force sensing resistors (FSR as unit elements of the array or tactels, which results in a robust sensor. The paper discusses design issues related to some necessary modifications of the force sensor, its assembly in an array, and the signal conditioning. The patch has 16 × 9 force sensors mounted on a flexible printed circuit board with a spatial resolution of 18.5 mm. The force range of a tactel is 6 N and its sensitivity is 0.6 V/N. The array is read at a rate of 78 frames per second. Finally, two simple application examples are also carried out with the sensor mounted on the forearm of a rescue robot that communicates with the sensor through a CAN bus.

  9. In situ catalytic growth of large-area multilayered graphene/MoS2 heterostructures

    Science.gov (United States)

    Fu, Wei; Du, Fei-Hu; Su, Juan; Li, Xin-Hao; Wei, Xiao; Ye, Tian-Nan; Wang, Kai-Xue; Chen, Jie-Sheng

    2014-04-01

    Stacking various two-dimensional atomic crystals on top of each other is a feasible approach to create unique multilayered heterostructures with desired properties. Herein for the first time, we present a controlled preparation of large-area graphene/MoS2 heterostructures via a simple heating procedure on Mo-oleate complex coated sodium sulfate under N2 atmosphere. Through a direct in situ catalytic reaction, graphene layer has been uniformly grown on the MoS2 film formed by the reaction of Mo species with S pecies, which is from the carbothermal reduction of sodium sulfate. Due to the excellent graphene ``painting'' on MoS2 atomic layers, the significantly shortened lithium ion diffusion distance and the markedly enhanced electronic conductivity, these multilayered graphene/MoS2 heterostructures exhibit high specific capacity, unprecedented rate performance and outstanding cycling stability, especially at a high current density, when used as an anode material for lithium batteries. This work provides a simple but efficient route for the controlled fabrication of large-area multilayered graphene/metal sulfide heterostructures with promising applications in battery manufacture, electronics or catalysis.

  10. Large-area synthesis of high-quality monolayer 1T’-WTe2 flakes

    Science.gov (United States)

    Naylor, Carl H.; Parkin, William M.; Gao, Zhaoli; Kang, Hojin; Noyan, Mehmet; Wexler, Robert B.; Tan, Liang Z.; Kim, Youngkuk; Kehayias, Christopher E.; Streller, Frank; Zhou, Yu Ren; Carpick, Robert; Luo, Zhengtang; Park, Yung Woo; Rappe, Andrew M.; Drndić, Marija; Kikkawa, James M.; Johnson, A. T. Charlie

    2017-06-01

    Large-area growth of monolayer films of the transition metal dichalcogenides is of the utmost importance in this rapidly advancing research area. The mechanical exfoliation method offers high quality monolayer material but it is a problematic approach when applied to materials that are not air stable. One important example is 1T’-WTe2, which in multilayer form is reported to possess a large non saturating magnetoresistance, pressure induced superconductivity, and a weak antilocalization effect, but electrical data for the monolayer is yet to be reported due to its rapid degradation in air. Here we report a reliable and reproducible large-area growth process for obtaining many monolayer 1T’-WTe2 flakes. We confirmed the composition and structure of monolayer 1T’-WTe2 flakes using x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, atomic force microscopy, Raman spectroscopy and aberration corrected transmission electron microscopy. We studied the time dependent degradation of monolayer 1T’-WTe2 under ambient conditions, and we used first-principles calculations to identify reaction with oxygen as the degradation mechanism. Finally we investigated the electrical properties of monolayer 1T’-WTe2 and found metallic conduction at low temperature along with a weak antilocalization effect that is evidence for strong spin-orbit coupling.

  11. Solution coating of large-area organic semiconductor thin films with aligned single-crystalline domains

    KAUST Repository

    Diao, Ying

    2013-06-02

    Solution coating of organic semiconductors offers great potential for achieving low-cost manufacturing of large-area and flexible electronics. However, the rapid coating speed needed for industrial-scale production poses challenges to the control of thin-film morphology. Here, we report an approach - termed fluid-enhanced crystal engineering (FLUENCE) - that allows for a high degree of morphological control of solution-printed thin films. We designed a micropillar-patterned printing blade to induce recirculation in the ink for enhancing crystal growth, and engineered the curvature of the ink meniscus to control crystal nucleation. Using FLUENCE, we demonstrate the fast coating and patterning of millimetre-wide, centimetre-long, highly aligned single-crystalline organic semiconductor thin films. In particular, we fabricated thin films of 6,13-bis(triisopropylsilylethynyl) pentacene having non-equilibrium single-crystalline domains and an unprecedented average and maximum mobilities of 8.1±1.2 cm2 V-1 s -1 and 11 cm2 V-1 s-1. FLUENCE of organic semiconductors with non-equilibrium single-crystalline domains may find use in the fabrication of high-performance, large-area printed electronics. © 2013 Macmillan Publishers Limited. All rights reserved.

  12. ITO with embedded silver grids as transparent conductive electrodes for large area organic solar cells

    Science.gov (United States)

    Patil, Bhushan R.; Mirsafaei, Mina; Piotr Cielecki, Paweł; Fernandes Cauduro, André Luis; Fiutowski, Jacek; Rubahn, Horst-Günter; Madsen, Morten

    2017-10-01

    In this work, development of semi-transparent electrodes for efficient large area organic solar cells (OSCs) has been demonstrated. Electron beam evaporated silver grids were embedded in commercially available ITO coatings on glass, through a standard negative photolithography process, in order to improve the conductivity of planar ITO substrates. The fabricated electrodes with embedded line and square patterned Ag grids reduced the sheet resistance of ITO by 25% and 40%, respectively, showing optical transmittance drops of less than 6% within the complete visible light spectrum for both patterns. Solution processed bulk heterojunction OSCs based on PTB7:[70]PCBM were fabricated on top of these electrodes with cell areas of 4.38 cm2, and the performance of these OSCs was compared to reference cells fabricated on pure ITO electrodes. The Fill Factor (FF) of the large-scale OSCs fabricated on ITO with embedded Ag grids was enhanced by 18% for the line grids pattern and 30% for the square grids pattern compared to that of the reference OSCs. The increase in the FF was directly correlated to the decrease in the series resistance of the OSCs. The maximum power conversion efficiency (PCE) of the OSCs was measured to be 4.34%, which is 23% higher than the PCE of the reference OSCs. As the presented method does not involve high temperature processing, it could be considered a general approach for development of large area organic electronics on solvent resistant, flexible substrates.

  13. Performance of a Large-Area Triple-GEM Detector in a Particle Beam

    CERN Document Server

    Karchin, Paul E

    2012-01-01

    A multi-institutional collaboration is investigating the possibility of enhancing muon tracking and triggering capabilities in the small-angle region $1.6 < \\rm{abs}(\\eta) < 2.1$ of the CMS experiment at the LHC by instrumenting the end-cap muon system with large-area gas electron multiplier (GEM) detectors. A first trapezoidal prototype triple-GEM detector of size 1 m by 0.5 m was built and operated successfully in a test beam at CERN in October 2010. Front-end readout boards utilizing the ``VFAT" chip are mounted in a regular array directly on the chambers. High voltage is provided by a compact divider board implemented with surface mount components. A tracker equipped with small GEM detectors was used to precisely measure the hit position in the large-area detector. A spatial resolution of 0.29 mm was measured in a region with average strip pitch of 1.1 mm, and $\\sim$98\\% hit efficiency was achieved at full operating voltage. An additional prototype chamber is constructed and will undergo beam tests...

  14. Development of stable current collectors for large area dye-sensitized solar cells

    Science.gov (United States)

    Pereira, Ana Isabel; Martins, Jorge; Tavares, Carlos José; Andrade, Luísa; Mendes, Adélio

    2017-11-01

    The substrate sheet resistance effect in a large area dye-sensitized solar cell (DSC) device is still the main factor responsible for low energy conversion efficiencies. In this work, current collectors made of metal lines were applied by magnetron sputtering on a transparent conducting glass substrate. The introduction of these metal lines enabled a decrease in the sheet resistance from 7.26 Ω·□-1 to 2.52 Ω·□-1, by depositing an optimized 1.0 μm tungsten thick layer on the top of 1.5 μm thick molybdenum lines. These Mo/W lines withstanded long-term stability when in contact with iodide/triiodide redox couple. Large area dye-sensitized solar cells with 36 cm2 of active area were assembled and the power conversion efficiency increased from 0.54% to 1.62% when ten metal lines were applied in both electrodes. As a final design, Mo/W lines were only applied onto the counter-electrode and protected with an indium-tin oxide layer; the resulting device showed a power conversion efficiency of 3.43%, compared with the reference efficiency of 2.38%.

  15. Study of organic photovoltaics by localized concentrated sunlight: towards optimization of charge collection in large-area solar cells

    NARCIS (Netherlands)

    Manor, A.; Katz, E.A.; Andriessen, H.A.J.M.; Galagan, Y.O.

    2011-01-01

    Large-area organic solar cells are known to suffer from a major efficiency decrease which originates from the combination of a voltage drop across the front electrode and the voltage-dependent photocurrent. In this letter, we demonstrate this efficiency loss on large area, indium tin oxide free

  16. ISO Science Legacy A Compact Review of ISO Major Achievements

    CERN Document Server

    Cesarsky, Catherine J

    2006-01-01

    Stars are born and die in clouds of gas and dust, opaque to most types of radiation, but transparent in the infrared. Requiring complex detectors, space missions and cooled telescopes, infrared astronomy is the last branch of this discipline to come of age. After a very successful sky survey performed in the eighties by the IRAS satellite, the Infrared Space Observatory, in the nineties, brought spectacular advances in the understanding of the processes giving rise to powerful infrared emission by a great variety of celestial sources. Outstanding results have been obtained on the bright comet Hale-Bopp, and in particular of its water spectrum, as well as on the formation, chemistry and dynamics of planetary objects in the solar system. Ideas on the early stages of stellar formation and on the stellar initial mass function have been clarified. ISO is the first facility in space able to provide a systematic diagnosis of the physical phenomena and the chemistry in the close environment of pre-main sequence stars...

  17. A population of gamma-ray millisecond pulsars seen with the Fermi Large Area Telescope.

    Science.gov (United States)

    Abdo, A A; Ackermann, M; Ajello, M; Atwood, W B; Axelsson, M; Baldini, L; Ballet, J; Barbiellini, G; Baring, M G; Bastieri, D; Baughman, B M; Bechtol, K; Bellazzini, R; Berenji, B; Bignami, G F; Blandford, R D; Bloom, E D; Bonamente, E; Borgland, A W; Bregeon, J; Brez, A; Brigida, M; Bruel, P; Burnett, T H; Caliandro, G A; Cameron, R A; Camilo, F; Caraveo, P A; Carlson, P; Casandjian, J M; Cecchi, C; Celik, O; Charles, E; Chekhtman, A; Cheung, C C; Chiang, J; Ciprini, S; Claus, R; Cognard, I; Cohen-Tanugi, J; Cominsky, L R; Conrad, J; Corbet, R; Cutini, S; Dermer, C D; Desvignes, G; de Angelis, A; de Luca, A; de Palma, F; Digel, S W; Dormody, M; do Couto e Silva, E; Drell, P S; Dubois, R; Dumora, D; Edmonds, Y; Farnier, C; Favuzzi, C; Fegan, S J; Focke, W B; Frailis, M; Freire, P C C; Fukazawa, Y; Funk, S; Fusco, P; Gargano, F; Gasparrini, D; Gehrels, N; Germani, S; Giebels, B; Giglietto, N; Giordano, F; Glanzman, T; Godfrey, G; Grenier, I A; Grondin, M H; Grove, J E; Guillemot, L; Guiriec, S; Hanabata, Y; Harding, A K; Hayashida, M; Hays, E; Hobbs, G; Hughes, R E; Jóhannesson, G; Johnson, A S; Johnson, R P; Johnson, T J; Johnson, W N; Johnston, S; Kamae, T; Katagiri, H; Kataoka, J; Kawai, N; Kerr, M; Knödlseder, J; Kocian, M L; Kramer, M; Kuss, M; Lande, J; Latronico, L; Lemoine-Goumard, M; Longo, F; Loparco, F; Lott, B; Lovellette, M N; Lubrano, P; Madejski, G M; Makeev, A; Manchester, R N; Marelli, M; Mazziotta, M N; McConville, W; McEnery, J E; McLaughlin, M A; Meurer, C; Michelson, P F; Mitthumsiri, W; Mizuno, T; Moiseev, A A; Monte, C; Monzani, M E; Morselli, A; Moskalenko, I V; Murgia, S; Nolan, P L; Norris, J P; Nuss, E; Ohsugi, T; Omodei, N; Orlando, E; Ormes, J F; Paneque, D; Panetta, J H; Parent, D; Pelassa, V; Pepe, M; Pesce-Rollins, M; Piron, F; Porter, T A; Rainò, S; Rando, R; Ransom, S M; Ray, P S; Razzano, M; Rea, N; Reimer, A; Reimer, O; Reposeur, T; Ritz, S; Rochester, L S; Rodriguez, A Y; Romani, R W; Roth, M; Ryde, F; Sadrozinski, H F W; Sanchez, D; Sander, A; Saz Parkinson, P M; Scargle, J D; Schalk, T L; Sgrò, C; Siskind, E J; Smith, D A; Smith, P D; Spandre, G; Spinelli, P; Stappers, B W; Starck, J L; Striani, E; Strickman, M S; Suson, D J; Tajima, H; Takahashi, H; Tanaka, T; Thayer, J B; Thayer, J G; Theureau, G; Thompson, D J; Thorsett, S E; Tibaldo, L; Torres, D F; Tosti, G; Tramacere, A; Uchiyama, Y; Usher, T L; Van Etten, A; Vasileiou, V; Venter, C; Vilchez, N; Vitale, V; Waite, A P; Wallace, E; Wang, P; Watters, K; Webb, N; Weltevrede, P; Winer, B L; Wood, K S; Ylinen, T; Ziegler, M

    2009-08-14

    Pulsars are born with subsecond spin periods and slow by electromagnetic braking for several tens of millions of years, when detectable radiation ceases. A second life can occur for neutron stars in binary systems. They can acquire mass and angular momentum from their companions, to be spun up to millisecond periods and begin radiating again. We searched Fermi Large Area Telescope data for pulsations from all known millisecond pulsars (MSPs) outside of globular clusters, using rotation parameters from radio telescopes. Strong gamma-ray pulsations were detected for eight MSPs. The gamma-ray pulse profiles and spectral properties resemble those of young gamma-ray pulsars. The basic emission mechanism seems to be the same for MSPs and young pulsars, with the emission originating in regions far from the neutron star surface.

  18. Realization of large area flexible fullerene-conjugated polymer photocells: A route to plastic solar cells

    Science.gov (United States)

    Brabec, C. J.; Padinger, F.; Dyakonov, V.; Hummelen, J. C.; Janssen, R. A. J.; Sariciftci, N. S.

    1998-08-01

    Various interesting photophysical phenomena in composites of fullerenes and non degenerate ground state conjugated polymers with highly extended π-electrons in their main chain can be explained by the ultrafast electron transfer from the conjugated polymer (donor) to the fullerene (acceptor) upon illumination. This photoeffect was utilized for the production of small area (mm2) photovoltaic devices which show energy conversion efficiencies ηe>1% and carrier collection efficiencies ηc>20%. In this work we present efficiency and stability studies on large area (6 cm by 6 cm) flexible solar cells based on a soluble alkoxy PPV (3,7-dimethyloctyloxy methyloxy poly(phenylenevinylene)) and a highly soluble fullerene derivative, 1-(3-methoxycarbonyl)propyl-1 phenyl [5,6]C61 (PCBM). The enhanced solubility of PCBM compared to C60 allows a high fullerene-conjugated polymer ratio and strongly supports the formation of donor-acceptor bulk heterojunctions.

  19. Large-area thermoelectric high-aspect-ratio nanostructures by atomic layer deposition

    Science.gov (United States)

    Ruoho, Mikko; Juntunen, Taneli; Tittonen, Ilkka

    2016-09-01

    We report on the thermoelectric properties of large-area high-aspect-ratio nanostructures. We fabricate the structures by atomic layer deposition of conformal ZnO thin films on track-etched polycarbonate substrate. The resulting structure consists of ZnO tubules which continue through the full thickness of the substrate. The electrical and thermal properties of the structures are studied both in-plane and out-of-plane. They exhibit very low out-of-plane thermal conductivity down to 0.15 W m-1 K-1 while the in-plane sheet resistance of the films was found to be half that of the same film on glass substrate, allowing material-independent doubling of output power of any planar thin-film thermoelectric generator. The wall thickness of the fabricated nanotubes was varied within a range of up to 100 nm. The samples show polycrystalline nature with (002) preferred crystal orientation.

  20. Fermi Large Area Telescope Observations of the Cosmic-Ray Induced

    Energy Technology Data Exchange (ETDEWEB)

    Abdo, A.

    2012-02-29

    We report on measurements of the cosmic-ray induced {gamma}-ray emission of Earth's atmosphere by the Large Area Telescope onboard the Fermi Gamma-ray Space Telescope. The LAT has observed the Earth during its commissioning phase and with a dedicated Earth-limb following observation in September 2008. These measurements yielded {approx} 6.4 x 10{sup 6} photons with energies > 100 MeV and {approx} 250 hours total livetime for the highest quality data selection. This allows the study of the spatial and spectral distributions of these photons with unprecedented detail. The spectrum of the emission - often referred to as Earth albedo gamma-ray emission - has a power-law shape up to 500 GeV with spectral index {Lambda} = 2.79 {+-} 0.06.

  1. Large-area imaging micro-well detectors for high-energy astrophysics

    CERN Document Server

    Deines-Jones, P; Hunter, S D; Jahoda, K; Owens, S M

    2002-01-01

    Micro-well detectors are pixelized imaging sensors that can be inexpensively fabricated in very large arrays. Owing to their intrinsic gain and operation at room temperature, they can be instrumented at very low power, per unit area, making them valuable for a variety of space-flight applications where wide-angle X-ray imaging or large-area particle tracking is required. For example, micro-well detectors have been chosen as the focal plane imager for Lobster-ISS, a proposed soft X-ray all-sky monitor. We have fabricated detectors which image X-rays with 200 mu m FWHM resolution at 3 keV. In agreement with other groups using similar geometries, we find nominal proportional counter energy resolution (20% at 6 keV in P-10), and stable operation at gas gains up to 30,000.

  2. Large area, low capacitance, GaAs nanowire photodetector with a transparent Schottky collecting junction

    Energy Technology Data Exchange (ETDEWEB)

    Seyedi, M. A., E-mail: seyedi@usc.edu; Yao, M.; O' Brien, J.; Dapkus, P. D. [Center for Energy Nanoscience, University of Southern California, Los Angeles, California 90089 (United States); Wang, S. Y. [Center for Energy Nanoscience, University of Southern California, Los Angeles, California 90089 (United States); Nanostructured Energy Conversion Technology and Research (NECTAR), Advanced Studies Laboratories, University of California, Santa Cruz, California 95064, USA and NASA Ames Research Center, Moffett Field, California 94035 (United States)

    2013-12-16

    We present experimental results on a GaAs/Indium-Tin-Oxide Schottky-like heterojunction photodetector based on a nanowire device geometry. By distributing the active detecting area over an array of nanowires, it is possible to achieve large area detection with low capacitance. Devices with bare GaAs and passivated AlGaAs/GaAs nanowires are fabricated to compare the responsivity with and without surface passivation. We are able to achieve responsivity of >0.5A/W and Signal-Noise-Ratio in excess of 7 dB for 2 V applied reverse bias with passivated nanowire devices. Capacitance-voltage measurement yields <5 nF/cm{sup 2}, which shows a strong possibility for high-speed applications with a broad area device.

  3. Quality control for the first large areas of triple GEM chambers for the CMS endcaps

    CERN Document Server

    Tytgat, Michael

    2015-01-01

    The CMS GEM collaboration plans to equip the very forward muon system with triple GEM detectors that can withstand the environment of the high-luminosity LHC. This project is at the final stages of R and D and moving to production. An unprecedented large area of several 100m2 are to be instrumented with GEM detectors which will be produced in six different sites around the world. A common construction and quality control procedure is required to ensure the performance of each detector. The quality control steps will include optical inspection, cleaning and baking of all materials and parts used to build the detector, leakage current tests of the GEM foils, high voltage tests, gas leak tests of the chambers and monitoring pressure drop vs. time, gain calibration to know the optimal operation region of the detector, gain uniformity tests, and studying the efficiency, noise and tracking performance of the detectors in a cosmic stand using scintillators.

  4. Metal-free plasma-enhanced chemical vapor deposition of large area nanocrystalline graphene

    Science.gov (United States)

    Schmidt, Marek E.; Xu, Cigang; Cooke, Mike; Mizuta, Hiroshi; Chong, Harold M. H.

    2014-04-01

    This paper reports on large area, metal-free deposition of nanocrystalline graphene (NCG) directly onto wet thermally oxidized 150 mm silicon substrates using parallel-plate plasma-enhanced chemical vapor deposition. Thickness non-uniformities as low as 13% are achieved over the whole substrate. The cluster size {{L}_{\\text{a}}} of the as-obtained films is determined from Raman spectra and lies between 1.74 and 2.67 nm. The film uniformity was further confirmed by Raman mapping. The sheet resistance {{R}_{\\text{sq}}} of 3.73 \\text{k}\\Omega and charge carrier mobility μ of 2.49\\;\\text{c}{{\\text{m}}^{2}}\\;{{\\text{V}}^{-1}}\\;{{\\text{s}}^{-1}} are measured. We show that the NCG films can be readily patterned by reactive ion etching. NCG is also successfully deposited onto quartz and sapphire substrates and showed >85% optical transparency in the visible light spectrum.

  5. Large area strain analysis using scanning transmission electron microscopy across multiple images

    Energy Technology Data Exchange (ETDEWEB)

    Oni, A. A.; Sang, X.; LeBeau, J. M., E-mail: jmlebeau@ncsu.edu [Department of Materials Science and Engineering, North Carolina State University, Raleigh, North Carolina 27695-7907 (United States); Raju, S. V.; Saxena, S. [Center for the Study of Matter under Extreme Conditions, Florida International University, Miami, Florida 33199 (United States); Dumpala, S.; Broderick, S.; Rajan, K. [Department of Materials Science and Engineering, Iowa State University, Ames, Iowa 50011 (United States); Kumar, A.; Sinnott, S. [Department of Materials Science and Engineering, University of Florida, Gainesville, Florida 32611 (United States)

    2015-01-05

    Here, we apply revolving scanning transmission electron microscopy to measure lattice strain across a sample using a single reference area. To do so, we remove image distortion introduced by sample drift, which usually restricts strain analysis to a single image. Overcoming this challenge, we show that it is possible to use strain reference areas elsewhere in the sample, thereby enabling reliable strain mapping across large areas. As a prototypical example, we determine the strain present within the microstructure of a Ni-based superalloy directly from atom column positions as well as geometric phase analysis. While maintaining atomic resolution, we quantify strain within nanoscale regions and demonstrate that large, unit-cell level strain fluctuations are present within the intermetallic phase.

  6. Perovskite Solar Cells with Large-Area CVD-Graphene for Tandem Solar Cells.

    Science.gov (United States)

    Lang, Felix; Gluba, Marc A; Albrecht, Steve; Rappich, Jörg; Korte, Lars; Rech, Bernd; Nickel, Norbert H

    2015-07-16

    Perovskite solar cells with transparent contacts may be used to compensate for thermalization losses of silicon solar cells in tandem devices. This offers a way to outreach stagnating efficiencies. However, perovskite top cells in tandem structures require contact layers with high electrical conductivity and optimal transparency. We address this challenge by implementing large-area graphene grown by chemical vapor deposition as a highly transparent electrode in perovskite solar cells, leading to identical charge collection efficiencies. Electrical performance of solar cells with a graphene-based contact reached those of solar cells with standard gold contacts. The optical transmission by far exceeds that of reference devices and amounts to 64.3% below the perovskite band gap. Finally, we demonstrate a four-terminal tandem device combining a high band gap graphene-contacted perovskite top solar cell (Eg = 1.6 eV) with an amorphous/crystalline silicon bottom solar cell (Eg = 1.12 eV).

  7. A large area position-sensitive ionization chamber for heavy-ion-induced reaction studies

    CERN Document Server

    Pant, L M; Dinesh, B V; Thomas, R G; Saxena, A; Sawant, Y S; Choudhury, R K

    2002-01-01

    A large area position-sensitive ionization chamber with a wide dynamic range has been developed to measure the mass, charge and energy of the heavy ions and the fission fragments produced in heavy-ion-induced reactions. The split anode geometry of the detector makes it suitable for both particle identification and energy measurements for heavy ions and fission fragments. The detector has been tested with alpha particles from sup 2 sup 4 sup 1 Am- sup 2 sup 3 sup 9 Pu source, fission fragments from sup 2 sup 5 sup 2 Cf and the heavy-ion beams from the 14UD Mumbai Pelletron accelerator facility. Using this detector, measurements on mass and total kinetic energy distributions in heavy-ion-induced fusion-fission reactions have been carried out for a wide range of excitation energies. Results on deep inelastic collisions and mass-energy correlations on different systems using this detector setup are discussed.

  8. Large-area silicon nanowires from silicon monoxide for solar cell applications.

    Science.gov (United States)

    Zhang, Ming-Liang; Mahmood, Iram; Fan, Xia; Xu, Gang; Wong, Ning-Bew

    2010-12-01

    Large-area upstanding silicon nanowires (SiNWs) were synthesized by hot-filament chemical vapor deposition (HFCVD) using silicon monoxide (SiO) powder as Si source under high vacuum (1.2 x 10(-5) Torr). Gold nanoparticles (AuNPs) were employed as catalyst, which were formed on Si substrate by in-situ reduction of gold chloride (AuCl3). The size and distribution of the Au nanoparticles can be easily controlled through chemical reaction conditions. Consequently, the diameter, length and density of SiNWs could be varied in certain range. The SiNWs obtained are single crystalline with growth directions predominantly along [01-1]. Silicon nanowires in large-scale and diameter less than 10 nm can be grown on different Si substrates with this method. Organic inorganic hybrid solar cells based on SiNWs arrays have been demonstrated.

  9. Controlled growth of large-area and high-quality molybdenum disulfide

    Science.gov (United States)

    Kim, Ja-Yeon; Kim, Doo-Hyung; Kwon, Min-Ki

    2017-11-01

    We describe a method of synthesizing large-area and uniform molybdenum disulfide (MoS2) films with control over the size and layer number at predetermined locations, using a step-edge mediated growth technique with simple lithography. Controlling various growth parameters such as temperature and pressure enables the synthesis of high quality, crystalline, monolayer MoS2, with electrical and optical properties that are comparable to those of exfoliated MoS2. This approach to the precise control of the size and orientation of MoS2 atomic layers can open a path toward the scalable production of high-quality devices based on MoS2 for applications in flexible displays.

  10. Laboratory and test beam results from a large-area silicon drift detector

    CERN Document Server

    Bonvicini, V; Giubellino, P; Gregorio, A; Idzik, M; Kolojvari, A A; Montaño-Zetina, L M; Nouais, D; Petta, C; Rashevsky, A; Randazzo, N; Reito, S; Tosello, F; Vacchi, A; Vinogradov, L I; Zampa, N

    2000-01-01

    A very large-area (6.75*8 cm/sup 2/) silicon drift detector with integrated high-voltage divider has been designed, produced and fully characterised in the laboratory by means of ad hoc designed MOS injection electrodes. The detector is of the "butterfly" type, the sensitive area being subdivided into two regions with a maximum drift length of 3.3 cm. The device was also tested in a pion beam (at the CERN PS) tagged by means of a microstrip detector telescope. Bipolar VLSI front-end cells featuring a noise of 250 e/sup -/ RMS at 0 pF with a slope of 40 e/sup -//pF have been used to read out the signals. The detector showed an excellent stability and featured the expected characteristics. Some preliminary results will be presented. (12 refs).

  11. Dark Forward Electrical Test Techniques Developed for Large-Area Photovoltaic Arrays

    Science.gov (United States)

    Kerslake, Thomas W.; Scheiman, David A.; Hoffman, David J.

    1998-01-01

    Spacecraft photovoltaic arrays (PVA's) must be carefully handled during ground integration processing and transportation to the launch site. Care is exercised to avoid damage that could degrade on-orbit electrical performance. Because of this damage risk, however, PVA's are typically deployed and illuminated with a light source so performance characteristics can be measured prior to launch. For large-area arrays, such as the Mir Cooperative Solar Array (2.7- by 18-m) and the International Space Station PVA blankets (4.6- by 31.7-m), this integrity check becomes resource intensive. Large test support structures are needed to offload the array during deployment in 1g, and large-aperture illumination equipment is required to uniformly illuminate array panels. Significant program time, funds, and manpower must be allocated for this kind of test program. Alternatively, launch site electrical performance tests can be bypassed with an attendant increase in risk.

  12. The On-Orbit Calibrations for the Fermi Large Area Telescope

    Energy Technology Data Exchange (ETDEWEB)

    Abdo, Aous A.; /Naval Research Lab, Wash., D.C.; Ackermann, M.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Ajello, M.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Ampe, J.; /Naval Research Lab, Wash., D.C.; Anderson, B.; /UC, Santa Cruz; Atwood, W.B.; /UC, Santa Cruz; Axelsson, M.; /Stockholm U., OKC /Stockholm U.; Bagagli, R.; /INFN, Pisa; Baldini, L.; /INFN, Pisa; Ballet, J.; /DAPNIA, Saclay; Barbiellini, Guido; /INFN, Trieste /Trieste U.; Bartelt, J.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bastieri, Denis; /INFN, Padua /Padua U.; Baughman, B.M.; /Ohio State U.; Bechtol, K.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bederede, D.; /DAPNIA, Saclay; Bellardi, F.; /INFN, Pisa; Bellazzini, R.; /INFN, Pisa; Belli, F.; /Frascati /Rome U.,Tor Vergata; Berenji, B.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bisello, D.; /INFN, Padua /Padua U. /Garching, Max Planck Inst., MPE /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Ecole Polytechnique /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /INFN, Perugia /Perugia U. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /DAPNIA, Saclay /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /INFN, Pisa /INFN, Pisa /Bari U. /INFN, Bari /Ecole Polytechnique /Washington U., Seattle /INFN, Padua /Padua U. /Bari U. /INFN, Bari /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /IASF, Milan /IASF, Milan /Kalmar U. /Stockholm U., OKC /Royal Inst. Tech., Stockholm /DAPNIA, Saclay /ASDC, Frascati /INFN, Pisa /INFN, Perugia /Perugia U. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /George Mason U. /Naval Research Lab, Wash., D.C. /NASA, Goddard /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /DAPNIA, Saclay /NASA, Goddard /INFN, Perugia /Perugia U.; /more authors..

    2011-11-17

    The Large Area Telescope (LAT) on-board the Fermi Gamma-ray Space Telescope began its on-orbit operations on June 23, 2008. Calibrations, defined in a generic sense, correspond to synchronization of trigger signals, optimization of delays for latching data, determination of detector thresholds, gains and responses, evaluation of the perimeter of the South Atlantic Anomaly (SAA), measurements of live time, of absolute time, and internal and spacecraft boresight alignments. Here we describe on-orbit calibration results obtained using known astrophysical sources, galactic cosmic rays, and charge injection into the front-end electronics of each detector. Instrument response functions will be described in a separate publication. This paper demonstrates the stability of calibrations and describes minor changes observed since launch. These results have been used to calibrate the LAT datasets to be publicly released in August 2009.

  13. An advanced open-path atmospheric pollution monitor for large areas

    Energy Technology Data Exchange (ETDEWEB)

    Taylor, L. [Westinghouse Science & Technology Center, Pittsburgh, PA (United States)

    1995-10-01

    Large amounts of toxic waste materials, generated in manufacturing fuel for nuclear reactors, are stored in tanks buried over large areas at DOE sites. Flammable and hazardous gases are continually generated by chemical reactions in the waste materials. To prevent explosive concentrations of these gases, the gases are automatically vented to the atmosphere when the pressure exceeds a preset value. Real-time monitoring of the atmosphere above the tanks with automatic alarming is needed to prevent exposing workers to unsafe conditions when venting occurs. This report describes the development of a monitor which can measure concentrations of hazardous gases over ranges as long as 4km. The system consists of a carbon dioxide laser combined with an acousto-optic tunable filter.

  14. Large area, continuous, few-layered graphene as anodes in organic photovoltaic devices

    Science.gov (United States)

    Wang, Yu; Chen, Xiaohong; Zhong, Yulin; Zhu, Furong; Loh, Kian Ping

    2009-08-01

    Large-area, continuous, transparent, and highly conducting few-layered graphene films produced by chemical vapor deposition method were used as anode for application in photovoltaic devices. The noncovalent modification of the graphene films with pyrene buanoic acid succidymidyl ester improved the power conversion efficiency (PCE) to 1.71%. This performance corresponds to ˜55.2% of the PCE of a control device based on indium tin oxide (ITO)/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)/poly(3-hexyl)thiophene: phenyl-C61-butyric acid methyl ester/LiF/Al electrodes (PCE=3.1%). This finding paves the way for the substitution of ITO in photovoltaic and electroluminescent devices with low cost graphene films.

  15. Thin film cadmium telluride charged particle sensors for large area neutron detectors

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, J. W.; Smith, L.; Calkins, J.; Mejia, I.; Cantley, K. D.; Chapman, R. A.; Quevedo-Lopez, M.; Gnade, B., E-mail: gnade@utdallas.edu [Materials Science and Engineering, University of Texas at Dallas, Richardson, Texas 75080 (United States); Kunnen, G. R.; Allee, D. R. [Flexible Display Center, Arizona State University, Phoenix, Arizona 85284 (United States); Sastré-Hernández, J.; Contreras-Puente, G. [Escuela Superior de Física y Matemáticas, Instituto Politécnico Nacional, Mexico City 07738 (Mexico); Mendoza-Pérez, R. [Universidad Autónoma de la Ciudad de México, Mexico City 09790 (Mexico)

    2014-09-15

    Thin film semiconductor neutron detectors are an attractive candidate to replace {sup 3}He neutron detectors, due to the possibility of low cost manufacturing and the potential for large areas. Polycrystalline CdTe is found to be an excellent material for thin film charged particle detectors—an integral component of a thin film neutron detector. The devices presented here are characterized in terms of their response to alpha and gamma radiation. Individual alpha particles are detected with an intrinsic efficiency of >80%, while the devices are largely insensitive to gamma rays, which is desirable so that the detector does not give false positive counts from gamma rays. The capacitance-voltage behavior of the devices is studied and correlated to the response due to alpha radiation. When coupled with a boron-based neutron converting material, the CdTe detectors are capable of detecting thermal neutrons.

  16. Large-area broadband saturable Bragg reflectors by use of oxidized AlAs.

    Science.gov (United States)

    Tandon, S N; Gopinath, J T; Shen, H M; Petrich, G S; Kolodziejski, L A; Kärtner, F X; Ippen, E P

    2004-11-01

    Broadband saturable Bragg reflectors (SBRs) are designed and fabricated by monolithic integration of semiconductor saturable absorbers with broadband Bragg mirrors. The wet oxidation of AlAs creates low-index AlxOy layers for broadband, high-index-contrast AlGaAs/AlxOy or InGaAlP/AlxOy mirrors. SBR mirror designs indicate greater than 99% reflectivity over bandwidths of 294, 466, and 563 nm for center wavelengths of 800, 1300, and 1550 nm, respectively. Highly strained and unstrained absorbers are stably integrated with the oxidized mirrors. Large-scale lateral oxidation techniques permit the fabrication of SBRs with diameters of 500 microm. Large-area, broadband SBRs are used to self-start and mode lock a variety of laser systems at wavelengths from 800 to 1550 nm.

  17. The on-orbit calibration of the Fermi Large Area Telescope

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, M.; Ajello, M.; Bartelt, J.; Bechtol, K.; Berenji, B.; Bloom, E.D.; Bogart, J.R.; Borgland, A.W.; Bouvier, A.; Cameron, R.A.; Campell, M.; Charles, E.; Chiang, J.; Claus, R.; Condamoor, S.; Digel, S.W.; Silva, E.D.E.; Drell, P.S.; Dubois, R.; Edmonds, Y.; Flath, D.L.; Focke, W.B.; Fouts, K.; Freytag, D.; Funk, S.; Glanzman, T.; Godfrey, G.; Goodman, J.; Hakimi, M.; Haller, G.; Hart, P.A.; Huffer, M.; Johannesson, G.; Johnson, A.S.; Kamae, T.; Kavelaars, A.; Kelly, H.; Kocian, M.L.; Lee, S.H.; Madejski, G.M.; Michelson, P.F.; Mitra, P.; Mitthumsiri, W.; Monzani, M.E.; Moskalenko, I.V.; Murgia, S.; Nelson, D.; Nolan, P.L.; Paneque, D.; Panetta, J.H.; Rochester, L.S.; Romani, R.W.; Sapozhnikov, L.; Saxton, O.H.; Sugizaki, M.; Tajima, H.; Tanaka, T.; Thayer, J.B.; Thayer, J.G.; Tramacere, A.; Turri, M.; Usher, T.L.; Wai, L.L.; Waite, A.P.; Wang, P. [Stanford Univ, WW Hansen Expt Phys Lab, Kavli Inst Particle Astrophys and Cosmol, Dept Phys, Stanford, CA 94305 (United States); Ackermann, M.; Ajello, M.; Bartelt, J.; Bechtol, K.; Berenji, B.; Bloom, E.D.; Bogart, J.R.; Borgland, A.W.; Bouvier, A.; Cameron, R.A.; Campell, M.; Charles, E.; Chiang, J.; Claus, R.; Condamoor, S.; Digel, S.W.; Silva, E.D.E.; Drell, P.S.; Dubois, R.; Edmonds, Y.; Flath, D.L.; Focke, W.B.; Fouts, K.; Freytag, D.; Funk, S.; Glanzman, T.; Godfrey, G.; Goodman, J.; Hakimi, M.; Haller, G.; Hart, P.A.; Huffer, M.; Johannesson, G.; Johnson, A.S.; Kamae, T.; Kavelaars, A.; Kelly, H.; Kocian, M.L.; Lee, S.H.; Madejski, G.M.; Michelson, P.F.; Mitra, P.; Mitthumsiri, W.; Monzani, M.E.; Moskalenko, I.V.; Murgia, S.; Nelson, D.; Nolan, P.L.; Paneque, D.; Panetta, J.H.; Rochester, L.S.; Romani, R.W.; Sapozhnikov, L.; Saxton, O.H.; Sugizaki, M.; Tajima, H.; Tanaka, T.; Thayer, J.B; Thayer, J.G.; Tramacere, A.; Turri, M.; Usher, T.L.; Wai, L.L.; Waite, A.P.; Wang, P. [Stanford Univ, SLAC Natl Accelerator Lab, Stanford, CA 94305 (United States)] [and others

    2009-07-01

    The Large Area Telescope (LAT) on-board the Fermi Gamma-ray Space Telescope began its on-orbit operations on June 23, 2008. Calibrations, defined in a generic sense, correspond to synchronization of trigger signals, optimization of delays for latching data, determination of detector thresholds, gains and responses, evaluation of the perimeter of the South Atlantic Anomaly (SAA), measurements of live time, of absolute time, and internal and spacecraft bore-sight alignments. Here we describe on-orbit calibration results obtained using known astrophysical sources, galactic cosmic rays, and charge injection into the front-end electronics of each detector. Instrument response functions will be described in a separate publication. This paper demonstrates the stability of calibrations and describes minor changes observed since launch. These results have been used to calibrate the LAT datasets to be publicly released in August 2009. (authors)

  18. Source-Search Sensitivity of a Large-Area, Coded-Aperture, Gamma-Ray Imager

    Energy Technology Data Exchange (ETDEWEB)

    Ziock, K P; Collins, J W; Craig, W W; Fabris, L; Lanza, R C; Gallagher, S; Horn, B P; Madden, N W; Smith, E; Woodring, M L

    2004-10-27

    We have recently completed a large-area, coded-aperture, gamma-ray imager for use in searching for radiation sources. The instrument was constructed to verify that weak point sources can be detected at considerable distances if one uses imaging to overcome fluctuations in the natural background. The instrument uses a rank-19, one-dimensional coded aperture to cast shadow patterns onto a 0.57 m{sup 2} NaI(Tl) detector composed of 57 individual cubes each 10 cm on a side. These are arranged in a 19 x 3 array. The mask is composed of four-centimeter thick, one-meter high, 10-cm wide lead blocks. The instrument is mounted in the back of a small truck from which images are obtained as one drives through a region. Results of first measurements obtained with the system are presented.

  19. ITO with embedded silver grids as transparent conductive electrodes for large area organic solar cells

    DEFF Research Database (Denmark)

    Patil, Bhushan Ramesh; Mirsafaei, Mina; Cielecki, Pawel Piotr

    2017-01-01

    to improve the conductivity of planar ITO substrates. The fabricated electrodes with embedded line and square patterned Ag grids reduced the sheet resistance of ITO by 25 % and 40 %, respectively, showing optical transmittance drops of less than 6 % within the complete visible light spectrum for both......In this work, development of semi-transparent electrodes for efficient large area organic solar cells (OSCs) has been demonstrated. Electron beam evaporated silver grids were embedded in commercially available ITO coatings on glass, through a standard negative photolithography process, in order...... patterns. Solution processed bulk heterojunction OSCs based on PTB7:[70]PCBM were fabricated on top of these electrodes with cell areas of 4.38 cm2, and the performance of these OSCs was compared to reference cells fabricated on pure ITO electrodes. The Fill Factor of the large-scale OSCs fabricated on ITO...

  20. Large-area formation of microsphere arrays using laser surface texturing technology

    Science.gov (United States)

    Yue, Liyang; Monks, James Norman; Yan, Bing; Wang, Zengbo

    2017-05-01

    Many potential applications in optics and nanotechnology require arrays of spherical particles with dozens of microns diameter, but it is not easy to format microspheres in this scale using existing technologies, especially for large-area application. In this paper, we report that microspheres sized from 40 to 80 μm can be regularly arranged in arrays with the aid of micro-ridges generated by pulsed nanosecond laser texturing. After experimental comparison, it is known that final formation of microspheres is significantly related to the height and width of micro-ridges. Proposed particle arrangement technology does not have area limitation and harsh hardware requirement, simultaneously possessing low-cost and time-saving advantages.

  1. Fabrication of Large Area Fishnet Optical Metamaterial Structures Operational at Near-IR Wavelengths

    Directory of Open Access Journals (Sweden)

    Dennis W. Prather

    2010-12-01

    Full Text Available In this paper, we demonstrate a fabrication process for large area (2 mm × 2 mm fishnet metamaterial structures for near IR wavelengths. This process involves: (a defining a sacrificial Si template structure onto a quartz wafer using deep-UV lithography and a dry etching process (b deposition of a stack of Au-SiO2-Au layers and (c a ‘lift-off’ process which removes the sacrificial template structure to yield the fishnet structure. The fabrication steps in this process are compatible with today’s CMOS technology making it eminently well suited for batch fabrication. Also, depending on area of the exposure mask available for patterning the template structure, this fabrication process can potentially lead to optical metamaterials spanning across wafer-size areas.

  2. Transfer and characterization of large-area CVD graphene for transparent electrode applications

    DEFF Research Database (Denmark)

    Whelan, Patrick Rebsdorf

    such as cracks, line defects, and wrinkles all contribute to lowering the quality and usability of graphene. This means that the development of transfer methods that does not introduce damage to the graphene layer and is non-destructive towards the catalytic growth substrate are of high importance. This thesis......The growth of chemical vapor deposited graphene on copper is approaching industrial maturity. A subsequent transfer of the graphene layer from its catalytic growth substrate is required for integration into optoelectronic devices and similar applications. It is well established that defects...... addresses key issues for industrial integration of large area graphene for optoelectronic devices. This is done through optimization of existing characterization methods and development of new transfer techniques. A method for accurately measuring the decoupling of graphene from copper catalysts...

  3. A facility for the test of large area muon chambers at high rates

    CERN Document Server

    Agosteo, S; Belli, G; Bonifas, A; Carabelli, V; Gatignon, L; Hessey, N P; Maggi, M; Peigneux, J P; Reithler, H; Silari, Marco; Vitulo, P; Wegner, M

    2000-01-01

    Operation of large area muon detectors at the future Large Hadron Collider (LHC) will be characterized by large sustained hit rates over the whole area, reaching the range of kHz/\\scm. We describe a dedicated test zone built at CERN to test the performance and the aging of the muon chambers currently under development. A radioactive source delivers photons causing the sustained rate of random hits, while a narrow beam of high energy muons is used to directly calibrate the detector performance. A system of remotely controlled lead filters serves to vary the rate of photons over four orders of magnitude, to allow the study of performance as a function of rate.

  4. Monolayer graphene-insulator-semiconductor emitter for large-area electron lithography

    Science.gov (United States)

    Kirley, Matthew P.; Aloui, Tanouir; Glass, Jeffrey T.

    2017-06-01

    The rapid adoption of nanotechnology in fields as varied as semiconductors, energy, and medicine requires the continual improvement of nanopatterning tools. Lithography is central to this evolving nanotechnology landscape, but current production systems are subject to high costs, low throughput, or low resolution. Herein, we present a solution to these problems with the use of monolayer graphene in a graphene-insulator-semiconductor (GIS) electron emitter device for large-area electron lithography. Our GIS device displayed high emission efficiency (up to 13%) and transferred large patterns (500 × 500 μm) with high fidelity (<50% spread). The performance of our device demonstrates a feasible path to dramatic improvements in lithographic patterning systems, enabling continued progress in existing industries and opening opportunities in nanomanufacturing.

  5. Photovoltaic properties of conjugated polymer/fullerene composites on large area flexible substrates

    Directory of Open Access Journals (Sweden)

    Desta Gebeyehu

    2000-06-01

    Full Text Available In this paper we present measurements of the photovoltaic response of bulk donor-acceptor heterojunction between the conjugated polymer, poly(3-octylthiophene, P3OT, (as a donor, D and fullerene (methanofullerene, (as acceptor, A, deposited between indium tin oxide and aluminum electrodes. The innovation involves the substrate, which is a polymer foil instead of glass. These devices are based on ultrafast, reversible, metastable photoinduced electron transfer and charge separation. We also present the efficiency and stability studies on large area (6 cm x 6 cm flexible plastic solar cells with monochromatic energy conversion efficiency (e of about 1.5% and carrier collection efficiency of nearly 20%. Further more, we have investigated the surface network morphology of these films layers by atomic force microscope (AFM. The development of solar cells based on composites of organic conjugated semi-conducting polymers with fullerene derivatives can provide a new method in the exploitation of solar energy.

  6. Plasma etching on large-area mono-, multi- and quasi-mono crystalline silicon

    DEFF Research Database (Denmark)

    Davidsen, Rasmus Schmidt; Schmidt, Michael Stenbæk; Boisen, Anja

    2013-01-01

    surface recombination. This work shows promising potential of future improvements in power conversion efficiency, since excellent light absorption has been shown for large-area, industry grade CZ Si wafers with several identified areas of improvement. We show that the RIE nanostructures lead to superior...... using maskless RIE in a O2 and SF6 plasma, and the surface topology was optimized for solar cell applications by varying gas flows, pressure, power and process time. The starting substrates were 156x156 mm p-type, CZ mono-, multi- and quasi-mono crystalline Si wafers, respectively, with a thickness...... a significant potential for improvement of solar cell performance compared to current industrial standards. The reflectance is shown to remain below that of conventional textured cells also at high angle of incidence. The process is shown to be equally applicable to mono-, multi- and quasi-mono-crystalline Si...

  7. Inkjet printed large-area flexible circuits: a simple methodology for optimizing the printing quality

    Science.gov (United States)

    Cheng, Tao; Wu, Youwei; Shen, Xiaoqin; Lai, Wenyong; Huang, Wei

    2018-01-01

    In this work, a simple methodology was developed to enhance the patterning resolution of inkjet printing, involving process optimization as well as substrate modification and treatment. The line width of the inkjet-printed silver lines was successfully reduced to 1/3 of the original value using this methodology. Large-area flexible circuits with delicate patterns and good morphology were thus fabricated. The resultant flexible circuits showed excellent electrical conductivity as low as 4.5 Ω/□ and strong tolerance to mechanical bending. The simple methodology is also applicable to substrates with various wettability, which suggests a general strategy to enhance the printing quality of inkjet printing for manufacturing high-performance large-area flexible electronics. Project supported by the National Key Basic Research Program of China (Nos. 2014CB648300, 2017YFB0404501), the National Natural Science Foundation of China (Nos. 21422402, 21674050), the Natural Science Foundation of Jiangsu Province (Nos. BK20140060, BK20130037, BK20140865, BM2012010), the Program for Jiangsu Specially-Appointed Professors (No. RK030STP15001), the Program for New Century Excellent Talents in University (No. NCET-13-0872), the NUPT "1311 Project" and Scientific Foundation (Nos. NY213119, NY213169), the Synergetic Innovation Center for Organic Electronics and Information Displays, the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD), the Leading Talent of Technological Innovation of National Ten-Thousands Talents Program of China, the Excellent Scientific and Technological Innovative Teams of Jiangsu Higher Education Institutions (No. TJ217038), the Program for Graduate Students Research and Innovation of Jiangsu Province (No. KYZZ16-0253), and the 333 Project of Jiangsu Province (Nos. BRA2017402, BRA2015374).

  8. A small-scale, rolled-membrane microfluidic artificial lung designed towards future large area manufacturing.

    Science.gov (United States)

    Thompson, A J; Marks, L H; Goudie, M J; Rojas-Pena, A; Handa, H; Potkay, J A

    2017-03-01

    Artificial lungs have been used in the clinic for multiple decades to supplement patient pulmonary function. Recently, small-scale microfluidic artificial lungs (μAL) have been demonstrated with large surface area to blood volume ratios, biomimetic blood flow paths, and pressure drops compatible with pumpless operation. Initial small-scale microfluidic devices with blood flow rates in the μl/min to ml/min range have exhibited excellent gas transfer efficiencies; however, current manufacturing techniques may not be suitable for scaling up to human applications. Here, we present a new manufacturing technology for a microfluidic artificial lung in which the structure is assembled via a continuous "rolling" and bonding procedure from a single, patterned layer of polydimethyl siloxane (PDMS). This method is demonstrated in a small-scale four-layer device, but is expected to easily scale to larger area devices. The presented devices have a biomimetic branching blood flow network, 10 μm tall artificial capillaries, and a 66 μm thick gas transfer membrane. Gas transfer efficiency in blood was evaluated over a range of blood flow rates (0.1-1.25 ml/min) for two different sweep gases (pure O2, atmospheric air). The achieved gas transfer data closely follow predicted theoretical values for oxygenation and CO2 removal, while pressure drop is marginally higher than predicted. This work is the first step in developing a scalable method for creating large area microfluidic artificial lungs. Although designed for microfluidic artificial lungs, the presented technique is expected to result in the first manufacturing method capable of simply and easily creating large area microfluidic devices from PDMS.

  9. Large area mapping of excised breast tissue by fluorescence confocal strip scanning: a preliminary feasibility study

    Science.gov (United States)

    Larson, Bjorg A.; Abeytunge, Sanjee; Murray, Melissa; Rajadhyaksha, Milind

    2013-03-01

    Lumpectomy, in conjunction with radiation and chemotherapy drugs, together comprise breast-conserving treatment as an alternative to total mastectomy for patients with breast tumors. The tumor is removed in surgery and sent for pathology processing to assess the margins, a process that takes at minimum several hours, and generally days. If the margins are not clear of tumor, the patient must undergo a second surgery to remove residual tumor. This re-excision rate varies by institution, but can be as high as 60%. Currently, no intraoperative microscopic technique is used routinely to examine tumor margins in breast tissue. A new technique for rapidly scanning large areas of tissue has been developed, called confocal strip scanning, which provides high resolution and seamless mosaics over large areas of intact tissue, with nuclear and cellular resolution and optical sectioning of about 2 microns. Up to 3.5 x 3.5 cm2 of tissue is imaged in 13 minutes at current stage speeds. This technique is demonstrated in freshly excised breast tissue, using a mobile confocal microscope stationed in our pathology laboratory. Twenty-five lumpectomy and mastectomy cases were used as a testing ground for reflectance and fluorescence contrast modes, resolution requirements and tissue fixturing configurations. It was concluded that fluorescent imaging provides the needed contrast to distinguish ducts and lobules from surrounding stromal tissue. Therefore the system was configured with 488 nm illumination, with acridine orange fluorescent dye for nuclear contrast, with the aim of building an image library of malignant and benign breast pathologies.

  10. Our results of large area mitomycin C application trabeculectomy in cases with advanced glaucoma

    Directory of Open Access Journals (Sweden)

    Mutlu Cihan Dağlıoğlu

    2013-12-01

    Full Text Available Objective: To evaluate large area Mitomycin-C (MMCapplied trabeculectomy results in advanced glaucomapatients in which targeted intraocular pressure (IOP cannot be achieved with maximum medical therapy.Methods: 41 eyes of 35 advanced glaucoma patientsthat can not be controlled with medical treatment were includedto the study. Large area MMC application was appliedfor 2 minutes in 0.2 mg/ml concentration. The meanfollow-up period was 28 months (24-36. All of the caseswere advanced glaucoma patients and 21mmHg IOP levelcould not be achieved in spite of maximum treatmentwith three drugs.Results: Of the 35 patients that were included to study,19 were male and 16 were female and the mean age was52.5±1.8 years (range, 45-73. Twenty-seven of eyeswere primary open angle glaucoma, 11 was pseudoexfoliativeglaucoma, 3 were angle closure glaucoma. In 5eyes (12.1% there were early hypotonia. Additional suturationwas made in 2 eyes with hypotonia. Two eyes weretreated with tight patching. Suture addition was made in1 eye with choroid effusion. Cataract was developed in4 eyes. There were 3 cystic bleb (7.3% and they weretreated with needle application. Thin avascular bleb wasdeveloped in 10 eyes (24.4%. In other eyes (68.3%there were thin diffuse bleb formations. When targetedIOP was considered as 15 mmHg, targeted IOP wasachieved in 36 (87.8% eyes.Conclusion: We suggest that trabeculectomy with largearea MMC application is an effective choice in advancedglaucoma patients in which targeted IOP can not beachieved with maximum medical treatment.Key words: Mitomycin-C, trabeculectomy, bleb

  11. IMPLEMENTATION OF ISO 14001 IN BULGARIA

    Directory of Open Access Journals (Sweden)

    Hristina HARIZANOVA

    2015-04-01

    Full Text Available In the last years, the Bulgarian business organizations and government bodies were facing with the increased needs to implement new standards which could bring a higher benefit for companies and also not to affect the environment. The ISO 14 000 Family is based on standards for environmental management and gives the possibility to be applied in any type of organization, public or private sectors, administrations, etc . The main aim of the publication is to trace the implementation of ISO 14001 in Bulgaria by sectors and type of activities. As well this research offers the main reasons to the Bulgarian firms to implement ISO 14001. For reaching the aim, the study made a review of a Evolution of ISO 14001 and its flexibility, in compliance with changes in the environment and business; b Research of the firms which implemented ISO 14001 in Bulgaria, c Content of the activities in the certification cycle. The used methods are according to the research system of the Bulgarian firms which implemented ISO 14001. Finally, some conclusions were drawn about the development of the ISO 14 001 in Bulgaria.

  12. Peningkatan Mutu Proses Perguruan Tinggi Melalui Sistem Mutu Iso 9000

    Directory of Open Access Journals (Sweden)

    Th. Widia Soerjaningsih

    2004-09-01

    Full Text Available Article was made to answer these several questions;  what is acreditation and the application in the college; what is ISO 9000 quality system; why is ISO 9000 needed by the college; how ISO 9000 can support the achievement of the defined quality level; how ISO  9000 guarantee the achievement of BAN target including quality, efficiency, and relevance; what is the difference between BAN Acreditation and ISO 9000 Certification; ISO 9000 Consultant: why it is necessary, how to choose it, the line of the contract; ISO 9000 Assessor and the achieve certification: SGS and etc.; and ISO 9000 Certification Proccess Cost Aspect.   

  13. Motivational factors for the adoption of ISO 9001 standards in Eastern Europe: the case of Bulgaria

    Directory of Open Access Journals (Sweden)

    Svetoslav Georgiev

    2015-05-01

    Full Text Available Purpose: This study analyzes the motivational factors for ISO 9001 certification in Bulgaria from the internal/external motivations perspective, or the so-called dual model.Design/methodology/approach: This study is based on a mixed method research approach, which employed two interviews with experts in the field of quality management at the exploratory stage, and a survey involving 127 companies at the descriptive stage.Findings: This study claims that enhanced company image and competitiveness – an external motivation - is the leading motivational factor for ISO 9001 certification in Bulgaria. At the same time, our primary investigation reveals that Bulgarian firms are not predominantly externally driven, for internal motivations including process improvement and product quality improvement seem to be an important driver for ISO 9001 certification. Last but not least, this research asserts that enhanced company image and competitiveness has a stronger impact on the motivations for ISO 9001 certification than customer and supplier pressure, which is in line with previous research works on developing economy economies such as Bulgaria. Finally, our study indicates a moderate, yet positive correlation between motivations for and benefits of ISO 9001 certification.Social implications: This research work casts some light on the evolution of quality management in Bulgaria since the end of communism, which can serve as an important foundation for the better understanding of quality management in former communist economies in general and Eastern European states in particular.Originality/value: Derived from the acute gap between ISO studies in Western and former communist economies, this research work presents one of the first official, international studies in the field of ISO certification in Bulgaria, and more precisely, a paper describing the motives for ISO 9001 certification among Bulgarian businesses.

  14. ISO 9001 2000 : the quality management process

    CERN Document Server

    Tricker, Ray

    2006-01-01

    With the publication of ISO 9001:2000, there is now a single quality management ?requirements? standard that is applicable to all organisations, products and services. ISO 9001:2000 is the only standard that can be used for the certification of a QMS and its generic requirements can be used by any organisation.ISO 9001:2000 applies to all types or organisations. It is the quality standard which specifies the requirements of quality management systems for use where organisations need to demonstrate their capability to provide products and services which meet both customer needs and relevant reg

  15. Definition of a CDI metadata profile and its ISO 19139 based encoding

    Science.gov (United States)

    Boldrini, Enrico; de Korte, Arjen; Santoro, Mattia; Schaap, Dick M. A.; Nativi, Stefano; Manzella, Giuseppe

    2010-05-01

    The Common Data Index (CDI) is the middleware service adopted by SeaDataNet for discovery and query. The primary goal of the EU funded project SeaDataNet is to develop a system which provides transparent access to marine data sets and data products from 36 countries in and around Europe. The European context of SeaDataNet requires that the developed system complies with European Directive INSPIRE. In order to assure the required conformity a GI-cat based solution is proposed. GI-cat is a broker service able to mediate from different metadata sources and publish them through a consistent and unified interface. In this case GI-cat is used as a front end to the SeaDataNet portal publishing the original data, based on CDI v.1 XML schema, through an ISO 19139 application profile catalog interface (OGC CSW AP ISO). The choice of ISO 19139 is supported and driven by INSPIRE Implementing Rules, that have been used as a reference through the whole development process. A mapping from the CDI data model to the ISO 19139 was hence to be implemented in GI-cat and a first draft quickly developed, as both CDI v.1 and ISO 19139 happen to be XML implementations based on the same abstract data model (standard ISO 19115 - metadata about geographic information). This first draft mapping pointed out the CDI metadata model differences with respect to ISO 19115, as it was not possible to accommodate all the information contained in CDI v.1 into ISO 19139. Moreover some modifications were needed in order to reach INSPIRE compliance. The consequent work consisted in the definition of the CDI metadata model as a profile of ISO 19115. This included checking of all the metadata elements present in CDI and their cardinality. A comparison was made with respect to ISO 19115 and possible extensions were individuated. ISO 19139 was then chosen as a natural XML implementation of this new CDI metadata profile. The mapping and the profile definition processes were iteratively refined leading up to a

  16. Physically-based failure analysis of shallow layered soil deposits over large areas

    Science.gov (United States)

    Cuomo, Sabatino; Castorino, Giuseppe Claudio; Iervolino, Aniello

    2014-05-01

    In the last decades, the analysis of slope stability conditions over large areas has become popular among scientists and practitioners (Cascini et al., 2011; Cuomo and Della Sala, 2013). This is due to the availability of new computational tools (Baum et al., 2002; Godt et al., 2008; Baum and Godt, 2012; Salciarini et al., 2012) - implemented in GIS (Geographic Information System) platforms - which allow taking into account the major hydraulic and mechanical issues related to slope failure, even for unsaturated soils, as well as the spatial variability of both topography and soil properties. However, the effectiveness (Sorbino et al., 2010) of the above methods it is still controversial for landslides forecasting especially depending on the accuracy of DTM (Digital Terrain Model) and for the chance that distinct triggering mechanisms may occur over large area. Among the major uncertainties, layering of soil deposits is of primary importance due to soil layer conductivity contrast and differences in shear strength. This work deals with the hazard analysis of shallow landslides over large areas, considering two distinct schematizations of soil stratigraphy, i.e. homogeneous or layered. To this purpose, the physically-based model TRIGRS (Baum et al., 2002) is firstly used, then extended to the case of layered deposit: specifically, a unique set of hydraulic properties is assumed while distinct soil unit weight and shear strength are considered for each soil layer. Both models are applied to a significant study area of Southern Italy, about 4 km2 large, where shallow deposits of air-fall volcanic (pyroclastic) soils have been affected by several landslides, causing victims, damages and economic losses. The achieved results highlight that soil volume globally mobilized over the study area highly depends on local stratigraphy of shallow deposits. This relates to the depth of critical slip surface which rarely corresponds to the bedrock contact where cohesionless coarse

  17. The practical application of ISO 22301.

    Science.gov (United States)

    Zawada, Brian

    2014-01-01

    As well as providing a brief background of ISO 22301, this paper describes three practical uses of the standard, as well as ways to use the content to solve common challenges that business continuity professionals face every day.

  18. ISO 14001 ENVIRONMENTAL MANAGEMENT SYSTEMS FOR GOVERNMENT

    Science.gov (United States)

    This presentation provides an overview of the document, ISO 14001 - A Tool for Supporting Government Environmental Programs and Policies, recently published by USEPA/s Office of Research and Development. It is an informational document, explaining the backjground and development ...

  19. Calibrating an optical scanner for quality assurance of large area radiation detectors

    Science.gov (United States)

    Karadzhinova, A.; Hildén, T.; Berdova, M.; Lauhakangas, R.; Heino, J.; Tuominen, E.; Franssila, S.; Hæggström, E.; Kassamakov, I.

    2014-11-01

    A gas electron multiplier (GEM) is a particle detector used in high-energy physics. Its main component is a thin copper-polymer-copper sandwich that carries Ø =70  ±  5 µm holes. Quality assurance (QA) is needed to guarantee both long operating life and reading fidelity of the GEM. Absence of layer defects and conformity of the holes to specifications is important. Both hole size and shape influence the detector’s gas multiplication factor and hence affect the collected data. For the scanner the required lateral measurement tolerance is ± 5 µm. We calibrated a high aspect ratio optical scanning system (OSS) to allow ensuring the quality of large GEM foils. For the calibration we microfabricated transfer standards, which were imaged with the OSS and which were compared to corresponding scanning electron microscopy (SEM) images. The calibration fulfilled the ISO/IEC 17025 and UKAS M3003 requirements: the calibration factor was 1.01  ±  0.01, determined at 95% confidence level across a 950  ×  950 mm2 area. The proposed large-scale scanning technique can potentially be valuable in other microfabricated products too.

  20. Validation and evaluation of common large-area display set (CLADS) performance specification

    Science.gov (United States)

    Hermann, David J.; Gorenflo, Ronald L.

    1998-09-01

    Battelle is under contract with Warner Robins Air Logistics Center to design a Common Large Area Display Set (CLADS) for use in multiple Command, Control, Communications, Computers, and Intelligence (C4I) applications that currently use 19- inch Cathode Ray Tubes (CRTs). Battelle engineers have built and fully tested pre-production prototypes of the CLADS design for AWACS, and are completing pre-production prototype displays for three other platforms simultaneously. With the CLADS design, any display technology that can be packaged to meet the form, fit, and function requirements defined by the Common Large Area Display Head Assembly (CLADHA) performance specification is a candidate for CLADS applications. This technology independent feature reduced the risk of CLADS development, permits life long technology insertion upgrades without unnecessary redesign, and addresses many of the obsolescence problems associated with COTS technology-based acquisition. Performance and environmental testing were performed on the AWACS CLADS and continues on other platforms as a part of the performance specification validation process. A simulator assessment and flight assessment were successfully completed for the AWACS CLADS, and lessons learned from these assessments are being incorporated into the performance specifications. Draft CLADS specifications were released to potential display integrators and manufacturers for review in 1997, and the final version of the performance specifications are scheduled to be released to display integrators and manufacturers in May, 1998. Initial USAF applications include replacements for the E-3 AWACS color monitor assembly, E-8 Joint STARS graphics display unit, and ABCCC airborne color display. Initial U.S. Navy applications include the E-2C ACIS display. For these applications, reliability and maintainability are key objectives. The common design will reduce the cost of operation and maintenance by an estimated 3.3M per year on E-3 AWACS

  1. Toward large-area roll-to-roll printed nanophotonic sensors

    Science.gov (United States)

    Karioja, Pentti; Hiltunen, Jussi; Aikio, Sanna M.; Alajoki, Teemu; Tuominen, Jarkko; Hiltunen, Marianne; Siitonen, Samuli; Kontturi, Ville; Böhlen, Karl; Hauser, Rene; Charlton, Martin; Boersma, Arjen; Lieberzeit, Peter; Felder, Thorsten; Eustace, David; Haskal, Eliav

    2014-05-01

    Polymers have become an important material group in fabricating discrete photonic components and integrated optical devices. This is due to their good properties: high optical transmittance, versatile processability at relative low temperatures and potential for low-cost production. Recently, nanoimprinting or nanoimprint lithography (NIL) has obtained a plenty of research interest. In NIL, a mould is pressed against a substrate coated with a moldable material. After deformation of the material, the mold is separated and a replica of the mold is formed. Compared with conventional lithographic methods, imprinting is simple to carry out, requires less-complicated equipment and can provide high-resolution with high throughput. Nanoimprint lithography has shown potential to become a method for low-cost and high-throughput fabrication of nanostructures. We show the development process of nano-structured, large-area multi-parameter sensors using Photonic Crystal (PC) and Surface Enhanced Raman Scattering (SERS) methodologies for environmental and pharmaceutical applications. We address these challenges by developing roll-to-roll (R2R) UV-nanoimprint fabrication methods. Our development steps are the following: Firstly, the proof of concept structures are fabricated by the use of wafer-level processes in Si-based materials. Secondly, the master molds of successful designs are fabricated, and they are used to transfer the nanophotonic structures into polymer materials using sheet-level UV-nanoimprinting. Thirdly, the sheet-level nanoimprinting processes are transferred to roll-to-roll fabrication. In order to enhance roll-to-roll manufacturing capabilities, silicone-based polymer material development was carried out. In the different development phases, Photonic Crystal and SERS sensor structures with increasing complexities were fabricated using polymer materials in order to enhance sheet-level and roll-to-roll manufacturing processes. In addition, chemical and molecular

  2. Applications of large-area nanopatterning to energy generation and storage devices

    Science.gov (United States)

    Mills, Eric N.

    This dissertation encompasses the creation and testing of nanostructured, electrochemically-active energy generation and storage devices, and development of the associated fabrication techniques. The fabricated devices include nanopatterned, plasmonically-active, TiO2+Au thin films for Photocatalytic Water Splitting (PCW), TiO2-based Dye-Sensitized Solar Cells (DSSCs) incorporating nanopatterned, plasmonically-active metallic front electrodes, and Si nanopillar anodes for Li-ion batteries. Techniques were also developed for encapsulation and removal of wet-etched Si nanowires from their mother substrates. TiO2 was the first material to be widely used for PCW. Its use is hampered by its large bandgap (~3.2eV), and poor recombination lifetimes. Au nanoparticles (NPs) have been previously used to improve recombination lifetimes in TiO2 by separating photogenerated carriers near the NP edges, and to increase photocurrents by injecting plasmonically-excited hot electrons into the TiO2 conduction band. Using nanostructured TiO 2+Au electrodes, we aim to increase the PCW efficiency of TiO2 -based electrodes. Dye-sensitized solar cells (DSSCs) employ visible-absorbing dyes anchored to a high-surface-area semiconducting scaffold. The front transparent conducting electrode (TCE) is typically ITO, a scarce and expensive material. We aim to increase the efficiency of thin-film DSSCs and eliminate the use of ITO by using a metallic subwavelength array (MESH) of nanoholes as the front TCE. Silicon holds promise as a high-capacity anode material for Li-ion batteries, as it can store ~10x the Li of graphite, the current leading anode material (3569 vs. 372 mAh/g). However, Si undergoes dramatic (>300%) volume expansion upon "lithiation", pulverizing any structure with non-nanoscopic dimensions (>250nm). We created large-area arrays of "nanopillars" with sub-100nm diameters, using roll-to-roll-compatible flexible-mold NIL on commercially-available metal substrates. Ordered

  3. Selective area heteroepitaxy through nanoimprint lithography for large area InP on Si

    Energy Technology Data Exchange (ETDEWEB)

    Metaferia, Wondwosen; Junesand, Carl; Kataria, Himanshu; Hu, Chen; Lourdudoss, Sebastian [Laboratory of Semiconductor Materials, KTH, Electrum 229, 164 40 Kista (Sweden); Tommila, Juha; Guina, Mircea; Niemi, Tapio [Optoelectronics Research Centre, Tampere University of Technology, 33101 Tampere (Finland)

    2012-07-15

    The use of nanoimprint lithography, a low cost and time saving alternative to E-beam lithography, for growing heteroepitaxial indium phosphide layer on silicon is demonstrated. Two types of patterns on 500 nm and 200 nm thick silicon dioxide mask either on InP substrate or InP seed layer on silicon were generated by UV nanoimprint lithography: (i) circular openings of diameter 150 nm and 200 nm and (ii) line openings of width ranging from 200 nm to 500 nm. Selective area growth and epitaxial lateral overgrowth of InP were conducted on these patterns in a low pressure hydride vapour phase epitaxy reactor. The epitaxial layers obtained were characterized by atomic force microscopy, scanning electron microscopy and micro photoluminescence. The growth from the circular openings on InP substrate and InP (seed) on Si substrate is extremely selective with similar growth morphology. The final shape has an octahedral flat top pyramid type geometry. These can be used as templates for growing InP nanostructures on silicon. The grown InP layers from the line openings on InP substrates are {proportional_to} 2.5 {mu}m thick with root mean square surface roughness as low as 2 nm. Completely coalesced layer of InP over an area of 1.5 mm x 1.5 mm was obtained.The room temperature photoluminescence intensity from InP layers on InP substrate is 55% of that of homoepitaxial InP layer. The decrease in PL intensity with respect to that of the homoepitaxial layer is probably due to defects associated with stacking faults caused by surface roughness of the mask surface. Thus in this study, we have demonstrated that growth of heteroepitaxial InP both homogeneously and selectively on the large area of silicon can be achieved. This opens up the feasibility of growing InP on large area silicon for several photonic applications (copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  4. Investigation of large-area multicoil inductively coupled plasma sources using three-dimensional fluid model

    Science.gov (United States)

    Brcka, Jozef

    2016-07-01

    A multi inductively coupled plasma (ICP) system can be used to maintain the plasma uniformity and increase the area processed by a high-density plasma. This article presents a source in two different configurations. The distributed planar multi ICP (DM-ICP) source comprises individual ICP sources that are not overlapped and produce plasma independently. Mutual coupling of the ICPs may affect the distribution of the produced plasma. The integrated multicoil ICP (IMC-ICP) source consists of four low-inductance ICP antennas that are superimposed in an azimuthal manner. The identical geometry of the ICP coils was assumed in this work. Both configurations have highly asymmetric components. A three-dimensional (3D) plasma model of the multicoil ICP configurations with asymmetric features is used to investigate the plasma characteristics in a large chamber and the operation of the sources in inert and reactive gases. The feasibility of the computational calculation, the speed, and the computational resources of the coupled multiphysics solver are investigated in the framework of a large realistic geometry and complex reaction processes. It was determined that additional variables can be used to control large-area plasmas. Both configurations can form a plasma, that azimuthally moves in a controlled manner, the so-called “sweeping mode” (SM) or “polyphase mode” (PPM), and thus they have the potential for large-area and high-density plasma applications. The operation in the azimuthal mode has the potential to adjust the plasma distribution, the reaction chemistry, and increase or modulate the production of the radicals. The intrinsic asymmetry of the individual coils and their combined operation were investigated within a source assembly primarily in argon and CO gases. Limited investigations were also performed on operation in CH4 gas. The plasma parameters and the resulting chemistry are affected by the geometrical relation between individual antennas. The aim of

  5. Benefits of the ISO 9001 and ISO 14001 standards: A literature review

    Directory of Open Access Journals (Sweden)

    Juan José Tarí

    2012-12-01

    Full Text Available Purpose: The purpose of this paper is to determine the similarities and differences between the benefits derived from implementing the ISO 9001 and the ISO 14001 standards.Methodology/Approach: The paper reviews the literature using an electronic search in the ScienceDirect, ABI/Inform, Emerald databases to identify papers focusing on the adoption of the ISO 9001 and 14001 standards and the benefits derived from implementing them.Findings: The paper identifies 82 articles about ISO 9001 and 29 about ISO 14001. Although some differences can be observed between the benefits considered by ISO 9001 and 14001, there is a great degree of coincidence in the benefits studied. The review suggests 13 benefits as the most usually analyzed (including environmental performance for the case of the ISO 14001 standard by scholars. It is suggested that both standards have clear benefits on operational, people and customer results and that the effects on financial performance are inconclusive.Limitations/implications: One limitation of this paper is that the works identified are conditioned by the search strategy used. In addition, other key words could be included in future studies such as operational, market, quality, financial performance, and customer satisfaction in order to expand this search.Originality/Value: The main contribution is that the paper identifies the literature gap and future research proposals with regard to the benefits of the ISO 9001 and ISO 14001 standards.

  6. Large Area Projection Microstereolithography: Characterization and Optimization of 3D Printing Parameters

    Energy Technology Data Exchange (ETDEWEB)

    Ng, Melissa R. [Ohlone College, Fremont, CA (United States); Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Moran, Bryan [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bekker, Logan [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dudukovic, Nikola [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-08-12

    Large Area Projection Microstereolithography (LAPμSL) is a new technology that allows the additive manufacture of parts that have feature sizes spanning from centimeters to tens of microns. Knowing the accuracy of builds from a system like this is a crucial step in development. This project explored the capabilities of the second and newest LAPμSL system that was built by comparing the features of actual builds to the desired structures. The system was then characterized in order to achieve the best results. The photo polymeric resins that were used were Autodesk PR48 and HDDA. Build parameters for Autodesk PR48 were found that allowed the prints to progress while using the full capacity of the system to print quality parts in a relatively short amount of time. One of the larger prints in particular had a print time that was nearly eighteen times faster than it would have been had printed in the first LAPμSL system. The characterization of HDDA resin helped the understanding that the flux of the light projected into the resin also affected the quality of the builds, rather than just the dose of light given. Future work for this project includes exploring the use of other resins in the LAPμSL systems, exploring the use of Raman Spectroscopy to analyze builds, and completing the characterization of the LAPμSL system.

  7. Ag paste-based nanomesh electrodes for large-area touch screen panels

    Science.gov (United States)

    Chung, Sung-il; Kyeom Kim, Pan; Ha, Tae-gyu

    2017-10-01

    This study reports a novel method for fabricating a nickel nanomesh mold using phase shift lithography, suitable for use in large-area touch screen panel applications. Generally, the values of light transmittance and sheet resistance of metal mesh transparent conducting electrode (TCE) films are determined by the ratio of the aperture to metal areas. In this study, taking into consideration the optimal light transmittance, sheet resistance, and pattern visibility issues, the line width of the metal mesh pattern was ~1 µm, and the pitch of the pattern was ~100 µm. In addition, a novel method of manufacturing wiring electrodes using a phase shift lithography process was also developed and evaluated. A TCE film with a size of 370 mm  ×  470 mm was prepared and evaluated for its light transmittance and sheet resistance. In addition, wiring electrodes with a length of 70 mm were fabricated and their line resistances evaluated by varying their line width.

  8. A new herbarium-based method for reconstructing the phenology of plant species across large areas.

    Science.gov (United States)

    Lavoie, Claude; Lachance, Daniel

    2006-04-01

    Phenological data have recently emerged as particularly effective tools for studying the impact of climate change on plants, but long phenological records are rare. The lack of phenological observations can nevertheless be filled by herbarium specimens as long as some correction procedures are applied to take into account the different climatic conditions associated with sampling locations. In this study, we propose a new herbarium-based method for reconstructing the flowering dates of plant species that have been collected across large areas. Coltsfoot (Tussilago farfara L.) specimens from southern Quebec were used to test the method. Flowering dates for coltsfoot herbarium specimens were adjusted according to the date of disappearance of snow cover in the region where they were collected and compared using a reference point (the date of earliest snowmelt). In southern Quebec, coltsfoot blooms earlier at present (15-31 d) than during the first part of the 20th century. This phenomenon is likely associated with the climate warming trends recorded in this region in the last century, especially during the last three decades when the month of April became warmer, thereby favoring very early-flowering cases. The earlier flowering of coltsfoot is, however, only noticeable in large urban areas (Montreal, Quebec City), suggesting a strong urban heat island effect on the flowering of this plant. Herbarium specimens are useful phenological indicators; however, the databases should be carefully examined prior to analysis to detect biases or trends associated with sampling locations.

  9. Eco-friendly materials for large area piezoelectronics: self-oriented Rochelle salt in wood

    Science.gov (United States)

    Lemaire, E.; Ayela, C.; Atli, A.

    2018-02-01

    Upgraded biodegradable piezoelectric composite materials elaborated by incorporation of Rochelle salt (RS, Sodium potassium tartrate tetrahydrate) in wood were reported. RS crystals, known as the first discovered piezoelectric material, were grown in the micro-cavities of wood, having naturally a tubular structure, by soaking the wood into RS saturated water. Since most of the cavities in wood are oriented in the same direction, the piezoelectric effect was improved when the cavities were filled by RS crystals. The mechanical, structural and piezoelectric properties of RS incorporated wood composite samples were characterized. Both direct and converse piezoelectric effects are illustrated. The wood-base composite exhibits an effective piezoelectric constant d 33 of 11 pC N‑1. Also, the flexural strength and modulus of elasticity were enhanced by inserting RS into the wood, nevertheless the samples became more brittle. The wood-based piezoelectric samples prepared in this work can be used as actuators, sensors or energy harvesters. The process developed here permits us to manufacture large area piezoelectric devices which are environmentally and economically unsurpassed.

  10. Enhancing Performance of Large-Area Organic Solar Cells with Thick Film via Ternary Strategy.

    Science.gov (United States)

    Zhang, Jianqi; Zhao, Yifan; Fang, Jin; Yuan, Liu; Xia, Benzheng; Wang, Guodong; Wang, Zaiyu; Zhang, Yajie; Ma, Wei; Yan, Wei; Su, Wenming; Wei, Zhixiang

    2017-06-01

    Large-scale fabrication of organic solar cells requires an active layer with high thickness tolerability and the use of environment-friendly solvents. Thick films with high-performance can be achieved via a ternary strategy studied herein. The ternary system consists of one polymer donor, one small molecule donor, and one fullerene acceptor. The small molecule enhances the crystallinity and face-on orientation of the active layer, leading to improved thickness tolerability compared with that of a polymer-fullerene binary system. An active layer with 270 nm thickness exhibits an average power conversion efficiency (PCE) of 10.78%, while the PCE is less than 8% with such thick film for binary system. Furthermore, large-area devices are successfully fabricated using polyethylene terephthalate (PET)/Silver gride or indium tin oxide (ITO)-based transparent flexible substrates. The product shows a high PCE of 8.28% with an area of 1.25 cm 2 for a single cell and 5.18% for a 20 cm 2 module. This study demonstrates that ternary organic solar cells exhibit great potential for large-scale fabrication and future applications. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Demonstration of surface resistance mapping of large-area HTS films using the dielectric resonator method

    Energy Technology Data Exchange (ETDEWEB)

    Kusunoki, M.; Takano, Y.; Nakamura, K.; Inadomaru, M.; Kosaka, D.; Nozaki, A.; Abe, S.; Yokoo, M.; Lorenz, M.; Hochmuth, H.; Mukaida, M.; Ohshima, S

    2003-01-01

    A scanning mapping technique of surface resistance (R{sub s}) using the sapphire dielectric resonator was developed and demonstrated for a 3-inch-diameter YBa{sub 2}Cu{sub 3}O{sub y} film. The area of the 3-inch film was divided by 5x5 mm grid for scan, resulting in 101 measurement points. Values of R{sub s} in the film varied from 2.9 to 3.8 m{omega} at 22 GHz and 77 K. The distribution of R{sub s} corresponded to that of the critical current density. Sampling of quality factors at each point was performed using non-contact measurement between film and sapphire. Since the airtight chamber was filled with dry N{sub 2} gas to avoid film degradation by frost and water during the warming process, perfect non-destructive measurement is realized. Fluctuation of distance between the surface of film and dielectric rod was monitored by resonance frequency. Errors in R{sub s} caused by the fluctuation were calculated within {+-}0.01 m{omega}. Furthermore, the system could detect a small (0.3 mmx0.5 mm) scratch defect as well as the gradient of film thickness on Ag film. This technique is effective for inspection of large-area high temperature superconducting films for microwave applications.

  12. Creation of economical and robust large area MCPs by ALD method for photodetectors

    Science.gov (United States)

    Mane, Anil U.; Elam, Jeffrey W.; Wagner, Robert G.; Siegmund, Oswald H. W.; Minot, Michael J.

    2016-09-01

    We report a cost-effective and production achievable path to fabricate robust large-area microchannel plates (MCPs), which offers the new prospect for larger area MCP-based detector technologies. We used atomic Layer Deposition (ALD), a thin film growth technique, to independently adjust the desired electrical resistance and secondary electron emission (SEE) properties of low cost borosilicate glass micro-capillary arrays (MCAs). These capabilities allow a separation of the substrate material properties from the signal amplification properties. This methodology enables the functionalization of microporous, highly insulating MCA substrates to produce sturdy, large format MCPs with unique properties such as high gain (MCP pair), low background noise, 10ps time resolution, sub-micron spatial resolution and excellent stability after only a short (2-3days) scrubbing time. The ALD self-limiting growth mechanism allows atomic level control over the thickness and composition of resistive and secondary electron emission (SEE) layers that can be deposited conformally on high aspect ratio ( 100) capillary glass arrays. We have developed several robust and consistent production doable ALD processes for the resistive coatings and SEE layers to give us precise control over the MCP parameters. Further, the adjustment of MCPs resistance by tailoring the ALD material composition permits the use of these MCPs at high or low temperature detector applications. Here we discuss ALD method for MCP functionalization and a variety of MCP testing results.

  13. Large-area field-ionization detector for the study of Rydberg atoms

    Science.gov (United States)

    Jones, A. C. L.; Piñeiro, A. M.; Roeder, E. E.; Rutbeck-Goldman, H. J.; Tom, H. W. K.; Mills, A. P.

    2016-11-01

    We describe here the development and characterization of a micro-channel plate (MCP) based detector designed for the efficient collection and detection of Rydberg positronium (Ps) atoms for use in a time-of-flight apparatus. The designed detector collects Rydberg atoms over a large area (˜4 times greater than the active area of the MCP), ionizing incident atoms and then collecting and focusing the freed positrons onto the MCP. Here we discuss the function, design, and optimization of the device. The detector has an efficiency for Rydberg Ps that is two times larger than that of the γ-ray scintillation detector based scheme it has been designed to replace, with half the background signal. In principle, detectors of the type described here could be readily employed for the detection of any Rydberg atom species, provided a sufficient field can be applied to achieve an ionization rate of ≥108/s. In such cases, the best time resolution would be achieved by collecting ionized electrons rather than the positive ions.

  14. A two-stage series diode for intense large-area moderate pulsed X rays production.

    Science.gov (United States)

    Lai, Dingguo; Qiu, Mengtong; Xu, Qifu; Su, Zhaofeng; Li, Mo; Ren, Shuqing; Huang, Zhongliang

    2017-01-01

    This paper presents a method for moderate pulsed X rays produced by a series diode, which can be driven by high voltage pulse to generate intense large-area uniform sub-100-keV X rays. A two stage series diode was designed for Flash-II accelerator and experimentally investigated. A compact support system of floating converter/cathode was invented, the extra cathode is floating electrically and mechanically, by withdrawing three support pins several milliseconds before a diode electrical pulse. A double ring cathode was developed to improve the surface electric field and emission stability. The cathode radii and diode separation gap were optimized to enhance the uniformity of X rays and coincidence of the two diode voltages based on the simulation and theoretical calculation. The experimental results show that the two stage series diode can work stably under 700 kV and 300 kA, the average energy of X rays is 86 keV, and the dose is about 296 rad(Si) over 615 cm(2) area with uniformity 2:1 at 5 cm from the last converter. Compared with the single diode, the average X rays' energy reduces from 132 keV to 88 keV, and the proportion of sub-100-keV photons increases from 39% to 69%.

  15. The second fermi large area telescope catalog of gamma-ray pulsars

    Energy Technology Data Exchange (ETDEWEB)

    Abdo, A. A.; Ajello, M.; Allafort, A.; Baldini, L.; Ballet, J.; Barbiellini, G.; Baring, M. G.; Bastieri, D.; Belfiore, A.; Bellazzini, R.; Bhattacharyya, B.; Bissaldi, E.; Bloom, E. D.; Bonamente, E.; Bottacini, E.; Brandt, T. J.; Bregeon, J.; Brigida, M.; Bruel, P.; Buehler, R.; Burgay, M.; Burnett, T. H.; Busetto, G.; Buson, S.; Caliandro, G. A.; Cameron, R. A.; Camilo, F.; Caraveo, P. A.; Casandjian, J. M.; Cecchi, C.; Çelik, Ö.; Charles, E.; Chaty, S.; Chaves, R. C. G.; Chekhtman, A.; Chen, A. W.; Chiang, J.; Chiaro, G.; Ciprini, S.; Claus, R.; Cognard, I.; Cohen-Tanugi, J.; Cominsky, L. R.; Conrad, J.; Cutini, S.; D' Ammando, F.; de Angelis, A.; DeCesar, M. E.; De Luca, A.; den Hartog, P. R.; de Palma, F.; Dermer, C. D.; Desvignes, G.; Digel, S. W.; Di Venere, L.; Drell, P. S.; Drlica-Wagner, A.; Dubois, R.; Dumora, D.; Espinoza, C. M.; Falletti, L.; Favuzzi, C.; Ferrara, E. C.; Focke, W. B.; Franckowiak, A.; Freire, P. C. C.; Funk, S.; Fusco, P.; Gargano, F.; Gasparrini, D.; Germani, S.; Giglietto, N.; Giommi, P.; Giordano, F.; Giroletti, M.; Glanzman, T.; Godfrey, G.; Gotthelf, E. V.; Grenier, I. A.; Grondin, M. -H.; Grove, J. E.; Guillemot, L.; Guiriec, S.; Hadasch, D.; Hanabata, Y.; Harding, A. K.; Hayashida, M.; Hays, E.; Hessels, J.; Hewitt, J.; Hill, A. B.; Horan, D.; Hou, X.; Hughes, R. E.; Jackson, M. S.; Janssen, G. H.; Jogler, T.; Jóhannesson, G.; Johnson, R. P.; Johnson, A. S.; Johnson, T. J.; Johnson, W. N.; Johnston, S.; Kamae, T.; Kataoka, J.; Keith, M.; Kerr, M.; Knödlseder, J.; Kramer, M.; Kuss, M.; Lande, J.; Larsson, S.; Latronico, L.; Lemoine-Goumard, M.; Longo, F.; Loparco, F.; Lovellette, M. N.; Lubrano, P.; Lyne, A. G.; Manchester, R. N.; Marelli, M.; Massaro, F.; Mayer, M.; Mazziotta, M. N.; McEnery, J. E.; McLaughlin, M. A.; Mehault, J.; Michelson, P. F.; Mignani, R. P.; Mitthumsiri, W.; Mizuno, T.; Moiseev, A. A.; Monzani, M. E.; Morselli, A.; Moskalenko, I. V.; Murgia, S.; Nakamori, T.; Nemmen, R.; Nuss, E.; Ohno, M.; Ohsugi, T.; Orienti, M.; Orlando, E.; Ormes, J. F.; Paneque, D.; Panetta, J. H.; Parent, D.; Perkins, J. S.; Pesce-Rollins, M.; Pierbattista, M.; Piron, F.; Pivato, G.; Pletsch, H. J.; Porter, T. A.; Possenti, A.; Rainò, S.; Rando, R.; Ransom, S. M.; Ray, P. S.; Razzano, M.; Rea, N.; Reimer, A.; Reimer, O.; Renault, N.; Reposeur, T.; Ritz, S.; Romani, R. W.; Roth, M.; Rousseau, R.; Roy, J.; Ruan, J.; Sartori, A.; Saz Parkinson, P. M.; Scargle, J. D.; Schulz, A.; Sgrò, C.; Shannon, R.; Siskind, E. J.; Smith, D. A.; Spandre, G.; Spinelli, P.; Stappers, B. W.; Strong, A. W.; Suson, D. J.; Takahashi, H.; Thayer, J. G.; Thayer, J. B.; Theureau, G.; Thompson, D. J.; Thorsett, S. E.; Tibaldo, L.; Tibolla, O.; Tinivella, M.; Torres, D. F.; Tosti, G.; Troja, E.; Uchiyama, Y.; Usher, T. L.; Vandenbroucke, J.; Vasileiou, V.; Venter, C.; Vianello, G.; Vitale, V.; Wang, N.; Weltevrede, P.; Winer, B. L.; Wolff, M. T.; Wood, D. L.; Wood, K. S.; Wood, M.; Yang, Z.

    2013-09-19

    This catalog summarizes 117 high-confidence ≥0.1 GeV gamma-ray pulsar detections using three years of data acquired by the Large Area Telescope (LAT) on the Fermi satellite. Half are neutron stars discovered using LAT data through periodicity searches in gamma-ray and radio data around LAT unassociated source positions. The 117 pulsars are evenly divided into three groups: millisecond pulsars, young radio-loud pulsars, and young radio-quiet pulsars. We characterize the pulse profiles and energy spectra and derive luminosities when distance information exists. Spectral analysis of the off-peak phase intervals indicates probable pulsar wind nebula emission for four pulsars, and off-peak magnetospheric emission for several young and millisecond pulsars. We compare the gamma-ray properties with those in the radio, optical, and X-ray bands. We provide flux limits for pulsars with no observed gamma-ray emission, highlighting a small number of gamma-faint, radio-loud pulsars. The large, varied gamma-ray pulsar sample constrains emission models. Fermi's selection biases complement those of radio surveys, enhancing comparisons with predicted population distributions.

  16. Fabrication of large area X-ray diffraction grating for X-ray phase imaging

    Science.gov (United States)

    Noda, Daiji; Tokuoka, Atsushi; Katori, Megumi; Minamiyama, Yasuto; Yamashita, Kenji; Nishida, Satoshi; Hattori, Tadashi

    2012-07-01

    X-ray lithography, which uses highly directional synchrotron radiation, is one of the technologies that can be used for fabricating micrometer-sized structures. In X-ray lithography, the accuracy of the fabricated structure depends largely on the accuracy of the X-ray mask. Since X-ray radiation is highly directional, a micro-fabrication technology that produces un-tapered and high aspect ratio highly absorbent structures on a low absorbent membrane is required. Conventionally, a resin material is used as the support membrane for large area X-ray masks. However, resin membranes have the disadvantage that they can sag after several cycles of X-ray exposure due to the heat generated by the X-rays. Therefore, we proposed and used thin carbon wafers for the membrane material because carbon has an extremely small thermal expansion coefficient. We fabricated new carbon membrane X-ray masks, and these results of X-ray lithography demonstrate the superior performance.

  17. Rapid fabrication of large-area, corrosion-resistant superhydrophobic Mg alloy surfaces.

    Science.gov (United States)

    Xu, Wenji; Song, Jinlong; Sun, Jing; Lu, Yao; Yu, Ziyuan

    2011-11-01

    A superhydrophobic magnesium (Mg) alloy surface was successfully fabricated via a facile electrochemical machining process, and subsequently covered with a fluoroalkylsilane (FAS) film. The surface morphologies and chemical compositions were investigated using a scanning electron microscope (SEM) equipped with an energy-dispersive spectroscopy (EDS) and a Fourier-transform infrared spectrophotometer (FTIR). The results show hierarchal rough structures and an FAS film with a low surface energy on the Mg alloy surfaces, which confers good superhydrophobicity with a water contact angle of 165.2° and a water tilting angle of approximately 2°. The processing conditions, such as the processing time and removal rate per unit area at a constant removal mass per unit area, were investigated to determine their effects on the superhydrophobicity. Interestingly, when the removal mass per unit area is constant at approximately 11.10 mg/cm(2), the superhydrophobicity does not change with the removal rate per unit area. Therefore, a superhydrophobic Mg alloy surface can be rapidly fabricated based on this property. A large-area superhydrophobic Mg alloy surface was also fabricated for the first time using a small-area moving cathode. The corrosion resistance and durability of the superhydrophobic surfaces were also examined.

  18. Resonant RF network antennas for large-area and large-volume inductively coupled plasma sources

    Science.gov (United States)

    Hollenstein, Ch; Guittienne, Ph; Howling, A. A.

    2013-10-01

    Large-area and large-volume radio frequency (RF) plasmas are produced by different arrangements of an elementary electrical mesh consisting of two conductors interconnected by a capacitor at each end. The obtained cylindrical and planar RF networks are resonant and generate very high RF currents. The input impedance of such RF networks shows the behaviour of an RLC parallel resonance equivalent circuit. The real impedance at the resonance frequency is of great advantage for power matching compared with conventional inductive devices. Changes in the RLC equivalent circuit during the observed E-H transition will allow future interpretation of the plasma-antenna coupling. Furthermore, high power transfer efficiencies are found during inductively coupled plasma (ICP) operation. For the planar RF antenna network it is shown that the E-H transition occurs simultaneously over the entire antenna. The underlying physics of these discharges induced by the resonant RF network antenna is found to be identical to that of the conventional ICP devices described in the literature. The resonant RF network antenna is a new versatile plasma source, which can be adapted to applications in industry and research.

  19. Fermi Large Area Telescope Observations of the Cygnus Loop Supernova Remnant

    Energy Technology Data Exchange (ETDEWEB)

    Katagiri, H.; /Ibaraki U., Mito; Tibaldo, L.; /INFN, Padua /Padua U. /Paris U., VI-VII; Ballet, J.; /Paris U., VI-VII; Giordano, F.; /Bari U. /Bari Polytechnic /INFN, Bari; Grenier, I.A.; /Paris U., VI-VII; Porter, T.A.; /Stanford U., HEPL /KIPAC, Menlo Park /SLAC; Roth, M.; /Washington U., Seattle; Tibolla, O.; /Wurzburg U.; Uchiyama, Y.; /Stanford U., HEPL /KIPAC, Menlo Park /SLAC; Yamazaki, R.; /Sagamihara, Aoyama Gakuin U.

    2011-11-08

    We present an analysis of the gamma-ray measurements by the Large Area Telescope (LAT) onboard the Fermi Gamma-ray Space Telescope in the region of the supernova remnant (SNR) Cygnus Loop (G74.0-8.5). We detect significant gamma-ray emission associated with the SNR in the energy band 0.2-100 GeV. The gamma-ray spectrum shows a break in the range 2-3 GeV. The gamma-ray luminosity is {approx} 1 x 10{sup 33} erg s{sup -1} between 1-100 GeV, much lower than those of other GeV-emitting SNRs. The morphology is best represented by a ring shape, with inner/outer radii 0{sup o}.7 {+-} 0{sup o}.1 and 1{sup o}.6 {+-} 0{sup o}.1. Given the association among X-ray rims, H{alpha} filaments and gamma-ray emission, we argue that gamma rays originate in interactions between particles accelerated in the SNR and interstellar gas or radiation fields adjacent to the shock regions. The decay of neutral pions produced in nucleon-nucleon interactions between accelerated hadrons and interstellar gas provides a reasonable explanation for the gamma-ray spectrum.

  20. THE SECOND FERMI LARGE AREA TELESCOPE CATALOG OF GAMMA-RAY PULSARS

    Energy Technology Data Exchange (ETDEWEB)

    Abdo, A. A. [Center for Earth Observing and Space Research, College of Science, George Mason University, Fairfax, VA 22030 (United States); Ajello, M. [Space Sciences Laboratory, 7 Gauss Way, University of California, Berkeley, CA 94720-7450 (United States); Allafort, A.; Bloom, E. D.; Bottacini, E. [W. W. Hansen Experimental Physics Laboratory, Kavli Institute for Particle Astrophysics and Cosmology, Department of Physics and SLAC National Accelerator Laboratory, Stanford University, Stanford, CA 94305 (United States); Baldini, L. [Università di Pisa and Istituto Nazionale di Fisica Nucleare, Sezione di Pisa, I-56127 Pisa (Italy); Ballet, J. [Laboratoire AIM, CEA-IRFU/CNRS/Université Paris Diderot, Service d' Astrophysique, CEA Saclay, F-91191 Gif sur Yvette (France); Barbiellini, G. [Istituto Nazionale di Fisica Nucleare, Sezione di Trieste, I-34127 Trieste (Italy); Baring, M. G. [Rice University, Department of Physics and Astronomy, MS-108, P.O. Box 1892, Houston, TX 77251 (United States); Bastieri, D. [Istituto Nazionale di Fisica Nucleare, Sezione di Padova, I-35131 Padova (Italy); Belfiore, A. [Santa Cruz Institute for Particle Physics, Department of Physics and Department of Astronomy and Astrophysics, University of California at Santa Cruz, Santa Cruz, CA 95064 (United States); Bellazzini, R.; Bregeon, J. [Istituto Nazionale di Fisica Nucleare, Sezione di Pisa, I-56127 Pisa (Italy); Bhattacharyya, B. [National Centre for Radio Astrophysics, Tata Institute of Fundamental Research, Pune 411 007 (India); Bissaldi, E. [Istituto Nazionale di Fisica Nucleare, Sezione di Trieste, and Università di Trieste, I-34127 Trieste (Italy); Bonamente, E. [Istituto Nazionale di Fisica Nucleare, Sezione di Perugia, I-06123 Perugia (Italy); Brandt, T. J. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Brigida, M., E-mail: hartog@stanford.edu [Dipartimento di Fisica ' ' M. Merlin' ' dell' Università e del Politecnico di Bari, I-70126 Bari (Italy); and others

    2013-10-01

    This catalog summarizes 117 high-confidence ≥0.1 GeV gamma-ray pulsar detections using three years of data acquired by the Large Area Telescope (LAT) on the Fermi satellite. Half are neutron stars discovered using LAT data through periodicity searches in gamma-ray and radio data around LAT unassociated source positions. The 117 pulsars are evenly divided into three groups: millisecond pulsars, young radio-loud pulsars, and young radio-quiet pulsars. We characterize the pulse profiles and energy spectra and derive luminosities when distance information exists. Spectral analysis of the off-peak phase intervals indicates probable pulsar wind nebula emission for four pulsars, and off-peak magnetospheric emission for several young and millisecond pulsars. We compare the gamma-ray properties with those in the radio, optical, and X-ray bands. We provide flux limits for pulsars with no observed gamma-ray emission, highlighting a small number of gamma-faint, radio-loud pulsars. The large, varied gamma-ray pulsar sample constrains emission models. Fermi's selection biases complement those of radio surveys, enhancing comparisons with predicted population distributions.

  1. THE FERMI LARGE AREA TELESCOPE ON ORBIT: EVENT CLASSIFICATION, INSTRUMENT RESPONSE FUNCTIONS, AND CALIBRATION

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, M. [Deutsches Elektronen Synchrotron DESY, D-15738 Zeuthen (Germany); Ajello, M.; Allafort, A.; Bechtol, K.; Blandford, R. D.; Bloom, E. D.; Bogart, J. R.; Borgland, A. W.; Bottacini, E. [W. W. Hansen Experimental Physics Laboratory, Kavli Institute for Particle Astrophysics and Cosmology, Department of Physics and SLAC National Accelerator Laboratory, Stanford University, Stanford, CA 94305 (United States); Albert, A. [Department of Physics, Center for Cosmology and Astro-Particle Physics, Ohio State University, Columbus, OH 43210 (United States); Atwood, W. B.; Bouvier, A. [Santa Cruz Institute for Particle Physics, Department of Physics and Department of Astronomy and Astrophysics, University of California at Santa Cruz, Santa Cruz, CA 95064 (United States); Axelsson, M. [Department of Astronomy, Stockholm University, SE-106 91 Stockholm (Sweden); Baldini, L. [Universita di Pisa and Istituto Nazionale di Fisica Nucleare, Sezione di Pisa, I-56127 Pisa (Italy); Ballet, J. [Laboratoire AIM, CEA-IRFU/CNRS/Universite Paris Diderot, Service d' Astrophysique, CEA Saclay, F-91191 Gif sur Yvette (France); Barbiellini, G. [Istituto Nazionale di Fisica Nucleare, Sezione di Trieste, I-34127 Trieste (Italy); Bastieri, D. [Istituto Nazionale di Fisica Nucleare, Sezione di Padova, I-35131 Padova (Italy); Bellazzini, R. [Istituto Nazionale di Fisica Nucleare, Sezione di Pisa, I-56127 Pisa (Italy); Bissaldi, E. [Institut fuer Astro- und Teilchenphysik and Institut fuer Theoretische Physik, Leopold-Franzens-Universitaet Innsbruck, A-6020 Innsbruck (Austria); Bonamente, E., E-mail: echarles@slac.stanford.edu, E-mail: luca.baldini@pi.infn.it, E-mail: rando@pd.infn.it [Istituto Nazionale di Fisica Nucleare, Sezione di Perugia, I-06123 Perugia (Italy); and others

    2012-11-15

    The Fermi Large Area Telescope (Fermi-LAT, hereafter LAT), the primary instrument on the Fermi Gamma-ray Space Telescope (Fermi) mission, is an imaging, wide field-of-view, high-energy {gamma}-ray telescope, covering the energy range from 20 MeV to more than 300 GeV. During the first years of the mission, the LAT team has gained considerable insight into the in-flight performance of the instrument. Accordingly, we have updated the analysis used to reduce LAT data for public release as well as the instrument response functions (IRFs), the description of the instrument performance provided for data analysis. In this paper, we describe the effects that motivated these updates. Furthermore, we discuss how we originally derived IRFs from Monte Carlo simulations and later corrected those IRFs for discrepancies observed between flight and simulated data. We also give details of the validations performed using flight data and quantify the residual uncertainties in the IRFs. Finally, we describe techniques the LAT team has developed to propagate those uncertainties into estimates of the systematic errors on common measurements such as fluxes and spectra of astrophysical sources.

  2. [Effects of large-area planting water hyacinth on macro-benthos community structure and biomass].

    Science.gov (United States)

    Liu, Guo-Feng; Liu, Hai-Qin; Zhang, Zhi-Yong; Zhang, Ying-Ying; Yan, Shao-Hua; Zhong, Ji-Cheng; Fan, Cheng-Xin

    2010-12-01

    The effects on macro-benthos and benthos environment of planting 200 hm2 water hyacinth (E. crassipens) in Zhushan Bay, Lake Taihu, were studied during 8-10 months consecutive surveys. Results indicated that average densities of mollusca (the main species were Bellamya aeruginosa) in far-planting, near-planting and planting area were 276.67, 371.11 and 440.00 ind/m2, respectively, and biomass were 373.15, 486.57 and 672.54 g/m2, respectively, showed that average density and biomass of planting area's were higher than those of others. However, the average density and biomass of Oligochaeta (the main species was Limodrilus hoffmeisteri) and Chironomidae in planting area were lower than that of outside planting area. The density and biomass of three dominant species of benthic animal increased quickly during 8-9 months, decreased quickly in October inside and outside water hyacinth planting area. The reason of this phenomenon could be possible that lots of cyanobacteria cells died and consumed dissolve oxygen in proceed decomposing. Algae cells released lots of phosphorus and nitrogen simultaneously, so macro-benthos died in this environment. The indexes of Shannon-Weaver and Simpson indicated that water environment was in moderate polluted state. On the basis of the survey results, the large-area and high-density planting water hyacinth haven't demonstrated a great impact on macrobenthos and benthos environment in short planting time (about 6 months planting time).

  3. Realization of large-area wrinkle-free monolayer graphene films transferred to functional substrates.

    Science.gov (United States)

    Park, Byeong-Ju; Choi, Jin-Seok; Kim, Hyun-Suk; Kim, Hyun-You; Jeong, Jong-Ryul; Choi, Hyung-Jin; Jung, Hyun-June; Jung, Min-Wook; An, Ki-Seok; Yoon, Soon-Gil

    2015-06-05

    Structural inhomogeneities, such as the wrinkles and ripples within a graphene film after transferring the free-standing graphene layer to a functional substrate, degrade the physical and electrical properties of the corresponding electronic devices. Here, we introduced titanium as a superior adhesion layer for fabricating wrinkle-free graphene films that is highly applicable to flexible and transparent electronic devices. The Ti layer does not influence the electronic performance of the functional substrates. Experimental and theoretical investigations confirm that the strong chemical interactions between Ti and any oxygen atoms unintentionally introduced on/within the graphene are responsible for forming the clean, defect-free graphene layer. Our results accelerate the practical application of graphene-related electronic devices with enhanced functionality. The large-area monolayer graphenes were prepared by a simple attachment of the Ti layer with the multi-layer wrinkle-free graphene films. For the first time, the graphene films were addressed for applications of superior bottom electrode for flexible capacitors instead of the novel metals.

  4. Elsevier Overview of large area triple-GEM detectors for the CMS forward muon upgrade

    CERN Document Server

    Abbaneo, D; Abbrescia, M; Abi Akl, M; Aboamer, O; Acosta, D; Ahmad, A; Ahmed, W; Aleksandrov, A; Altieri, P; Asawatangtrakuldee, C; Aspell, P; Assran, Y; Awan, I; Bally, S; Ban, Y; Banerjee, S; Barashko, V; Barria, P; Bencze, G; Beni, N; Benussi, L; Bhopatkar, V; Bianco, S; Bos, J; Bouhali, O; Braghieri, A; Braibant, S; Buontempo, S; Calabria, C; Caponero, M; Caputo, C; Cassese, F; Castaneda, A; Cauwenbergh, S; Cavallo, F R; Celik, A; Choi, M; Choi, S; Christiansen, J; Cimmino, A; Colafranceschi, S; Colaleo, A; Conde Garcia, A; Czellar, S; Dabrowski, M M; De Lentdecker, G; De Oliveira, R; de Robertis, G; Dildick, S; Dorney, B; Endroczi, G; Errico, F; Fenyvesi, A; Ferry, S; Furic, I; Giacomelli, P; Gilmore, J; Golovtsov, V; Guiducci, L; Guilloux, F; Gutierrez, A; Hadjiiska, R M; Hauser, J; Hoepfner, K; Hohlmann, M; Hoorani, H; Iaydjiev, P; Jeng, Y G; Kamon, T; Karchin, P; Korytov, A; Krutelyov, S; Kumar, A; Kim, H; Lee, J; Lenzi, T; Litov, L; Loddo, F; Madorsky, A; Maerschalk, T; Maggi, M; Magnani, A; Mal, P K; Mandal, K; Marchioro, A; Marinov, A; Majumdar, N; Merlin, J A; Mitselmakher, G; Mohanty, A K; Mohapatra, A; Molnar, J; Muhammad, S; Mukhopadhyay, S; Naimuddin, M; Nuzzo, S; Oliveri, E; Pant, L M; Paolucci, P; Park, I; Passeggio, G; Pavlov, B; Philipps, B; Piccolo, D; Postema, H; Puig Baranac, A; Radi, A; Radogna, R; Raffone, G; Ranieri, A; Rashevski, G; Riccardi, C; Rodozov, M; Rodrigues, A; Ropelewski, L; RoyChowdhury, S; Ryu, G; Ryu, M S; Safonov, A; Salva, S; Saviano, G; Sharma, A; Sharma, A; Sharma, R; Shah, A H; Shopova, M; Sturdy, J; Sultanov, G; Swain, S K; Szillasi, Z; Talvitie, J; Tatarinov, A; Tuuva, T; Tytgat, M; Vai, I; Van Stenis, M; Venditti, R; Verhagen, E; Verwilligen, P; Vitulo, P; Volkov, S; Vorobyev, A; Wang, D; Wang, M; Yang, U; Yang, Y; Yonamine, R; Zaganidis, N; Zenoni, F; Zhang, A

    2017-01-01

    We report on the status of the project to install large-area triple-foil gas electron multiplier (GEM) detectors in the end-cap muon system of the Compact Muon Solenoid (CMS) experiment at the LHC operating at the high luminosity planned after the current period of data-taking (run 2). In the pseudo-rapidity region $1.6 < \\lvert\\eta\\rvert < 2.4$, the GEM detectors will suppress the rate of background triggers while maintaining high trigger efficiency for low transverse momentum muons, and enhancing the robustness of muon detection in the high-flux environment of the end-cap region. GEM detectors will also be used to extend the range of muon identification up to about $\\lvert\\eta\\rvert = 3.0$. We describe the design of the GEM chambers, readout electronics, and data acquisition system for the three stations in each endcap, located at increasing distances from the interaction point. For the intermediate station, the design is fixed and we describe plans to install several of the intermediate station dete...

  5. Performance Improvements of Selective Emitters by Laser Openings on Large-Area Multicrystalline Si Solar Cells

    Directory of Open Access Journals (Sweden)

    Sheng-Shih Wang

    2014-01-01

    Full Text Available This study focuses on the laser opening technique used to form a selective emitter (SE structure on multicrystalline silicon (mc-Si. This technique can be used in the large-area (156 × 156 mm2 solar cells. SE process of this investigation was performed using 3 samples SE1–SE3. Laser fluences can vary in range of 2–5 J/cm2. The optimal conversion efficiency of 15.95% is obtained with the SE3 (2 J/cm2 fluence after laser opening with optimization of heavy and light dopant, which yields a gain of 0.48%abs compared with that of a reference cell (without fluence. In addition, this optimal SE3 cell displays improved characteristics compared with other cells with a higher average value of external quantum efficiency (EQEavg = 68.6% and a lower average value of power loss (Ploss = 2.33 mW/cm2. For the fabrication of solar cells, the laser opening process comprises fewer steps than traditional photolithography does. Furthermore, the laser opening process decreases consumption of chemical materials; therefore, the laser opening process decreases both time and cost. Therefore, SE process is simple, cheap, and suitable for commercialization. Moreover, the prominent features of the process render it effective means to promote overall performance in the photovoltaic industry.

  6. Versatile Large-Area Custom-Feature van der Waals Epitaxy of Topological Insulators.

    Science.gov (United States)

    Trivedi, Tanuj; Roy, Anupam; Movva, Hema C P; Walker, Emily S; Bank, Seth R; Neikirk, Dean P; Banerjee, Sanjay K

    2017-07-25

    As the focus of applied research in topological insulators (TI) evolves, the need to synthesize large-area TI films for practical device applications takes center stage. However, constructing scalable and adaptable processes for high-quality TI compounds remains a challenge. To this end, a versatile van der Waals epitaxy (vdWE) process for custom-feature bismuth telluro-sulfide TI growth and fabrication is presented, achieved through selective-area fluorination and modification of surface free-energy on mica. The TI features grow epitaxially in large single-crystal trigonal domains, exhibiting armchair or zigzag crystalline edges highly oriented with the underlying mica lattice and only two preferred domain orientations mirrored at 180°. As-grown feature thickness dependence on lateral dimensions and denuded zones at boundaries are observed, as explained by a semiempirical two-species surface migration model with robust estimates of growth parameters and elucidating the role of selective-area surface modification. Topological surface states contribute up to 60% of device conductance at room temperature, indicating excellent electronic quality. High-yield microfabrication and the adaptable vdWE growth mechanism with readily alterable precursor and substrate combinations lend the process versatility to realize crystalline TI synthesis in arbitrary shapes and arrays suitable for facile integration with processes ranging from rapid prototyping to scalable manufacturing.

  7. Large area molybdenum disulphide- epitaxial graphene vertical Van der Waals heterostructures

    Science.gov (United States)

    Pierucci, Debora; Henck, Hugo; Naylor, Carl H.; Sediri, Haikel; Lhuillier, Emmanuel; Balan, Adrian; Rault, Julien E.; Dappe, Yannick J.; Bertran, François; Fèvre, Patrick Le; Johnson, A. T. Charlie; Ouerghi, Abdelkarim

    2016-01-01

    Two-dimensional layered transition metal dichalcogenides (TMDCs) show great potential for optoelectronic devices due to their electronic and optical properties. A metal-semiconductor interface, as epitaxial graphene - molybdenum disulfide (MoS2), is of great interest from the standpoint of fundamental science, as it constitutes an outstanding platform to investigate the interlayer interaction in van der Waals heterostructures. Here, we study large area MoS2-graphene-heterostructures formed by direct transfer of chemical-vapor deposited MoS2 layer onto epitaxial graphene/SiC. We show that via a direct transfer, which minimizes interface contamination, we can obtain high quality and homogeneous van der Waals heterostructures. Angle-resolved photoemission spectroscopy (ARPES) measurements combined with Density Functional Theory (DFT) calculations show that the transition from indirect to direct bandgap in monolayer MoS2 is maintained in these heterostructures due to the weak van der Waals interaction with epitaxial graphene. A downshift of the Raman 2D band of the graphene, an up shift of the A1g peak of MoS2 and a significant photoluminescence quenching are observed for both monolayer and bilayer MoS2 as a result of charge transfer from MoS2 to epitaxial graphene under illumination. Our work provides a possible route to modify the thin film TDMCs photoluminescence properties via substrate engineering for future device design. PMID:27246929

  8. Nanorings and nanocrescents formed via shaped nanosphere lithography: a route toward large areas of infrared metamaterials

    Science.gov (United States)

    Lewicka, Zuzanna A.; Li, Yang; Bohloul, Arash; Yu, William W.; Colvin, Vicki L.

    2013-03-01

    This paper presents a new approach to nanosphere lithography, which overcomes undesirable manufacturing issues such as complex tilted-rotary evaporation and ion beam milling. A key innovation in this process is the use of non-conductive edge strips placed on top of the samples prior to metal removal. Such elements help to direct the flow of reactive ions during plasma etching and produce well-ordered arrays of metallic nanorings and nanocrescents over large areas of ˜1 cm2. The obtained highly uniform nanocrescent array exhibits an electric resonance of 1.7 μm and a magnetic resonance of 3 μm. The absorption resonances of the fabricated nanorings depend on their diameters and shift toward shorter wavelengths (λ = 1.7 μm for do = 308 nm) as compared to larger rings (λ = 2.2 μm do = 351 nm). FDTD-based simulations match well with the experimental results. This ‘shaped nanosphere lithography’ approach creates opportunities to generate nanorings and nanocrescents that promise potential applications in chemical and biological sensing, for surface enhanced spectroscopy and in the field of infrared metamaterials.

  9. High Yield Chemical Vapor Deposition Growth of High Quality Large-Area AB Stacked Bilayer Graphene

    Science.gov (United States)

    Liu, Lixin; Zhou, Hailong; Cheng, Rui; Yu, Woo Jong; Liu, Yuan; Chen, Yu; Shaw, Jonathan; Zhong, Xing; Huang, Yu; Duan, Xiangfeng

    2012-01-01

    Bernal stacked (AB stacked) bilayer graphene is of significant interest for functional electronic and photonic devices due to the feasibility to continuously tune its band gap with a vertical electrical field. Mechanical exfoliation can be used to produce AB stacked bilayer graphene flakes but typically with the sizes limited to a few micrometers. Chemical vapor deposition (CVD) has been recently explored for the synthesis of bilayer graphene but usually with limited coverage and a mixture of AB and randomly stacked structures. Herein we report a rational approach to produce large-area high quality AB stacked bilayer graphene. We show that the self-limiting effect of graphene growth on Cu foil can be broken by using a high H2/CH4 ratio in a low pressure CVD process to enable the continued growth of bilayer graphene. A high temperature and low pressure nucleation step is found to be critical for the formation of bilayer graphene nuclei with high AB stacking ratio. A rational design of a two-step CVD process is developed for the growth of bilayer graphene with high AB stacking ratio (up to 90 %) and high coverage (up to 99 %). The electrical transport studies demonstrated that devices made of the as-grown bilayer graphene exhibit typical characteristics of AB stacked bilayer graphene with the highest carrier mobility exceeding 4,000 cm2/V·s at room temperature, comparable to that of the exfoliated bilayer graphene. PMID:22906199

  10. Hexagonal Boron Nitride assisted transfer and encapsulation of large area CVD graphene

    Science.gov (United States)

    Shautsova, Viktoryia; Gilbertson, Adam M.; Black, Nicola C. G.; Maier, Stefan A.; Cohen, Lesley F.

    2016-07-01

    We report a CVD hexagonal boron nitride (hBN-) assisted transfer method that enables a polymer-impurity free transfer process and subsequent top encapsulation of large-area CVD-grown graphene. We demonstrate that the CVD hBN layer that is utilized in this transfer technique acts as a buffer layer between the graphene film and supporting polymer layer. We show that the resulting graphene layers possess lower doping concentration, and improved carrier mobilities compared to graphene films produced by conventional transfer methods onto untreated SiO2/Si, SAM-modified and hBN covered SiO2/Si substrates. Moreover, we show that the top hBN layer used in the transfer process acts as an effective top encapsulation resulting in improved stability to ambient exposure. The transfer method is applicable to other CVD-grown 2D materials on copper foils, thereby facilitating the preparation of van der Waals heterostructures with controlled doping.

  11. Direct Synthesis of Large-Area 2D Mo2C on In Situ Grown Graphene.

    Science.gov (United States)

    Geng, Dechao; Zhao, Xiaoxu; Chen, Zhongxin; Sun, Weiwei; Fu, Wei; Chen, Jianyi; Liu, Wei; Zhou, Wu; Loh, Kian Ping

    2017-09-01

    As a new member of the MXene group, 2D Mo 2 C has attracted considerable interest due to its potential application as electrodes for energy storage and catalysis. The large-area synthesis of Mo 2 C film is needed for such applications. Here, the one-step direct synthesis of 2D Mo 2 C-on-graphene film by molten copper-catalyzed chemical vapor deposition (CVD) is reported. High-quality and uniform Mo 2 C film in the centimeter range can be grown on graphene using a Mo-Cu alloy catalyst. Within the vertical heterostructure, graphene acts as a diffusion barrier to the phase-segregated Mo and allows nanometer-thin Mo 2 C to be grown. Graphene-templated growth of Mo 2 C produces well-faceted, large-sized single crystals with low defect density, as confirmed by scanning transmission electron microscopy (STEM) measurements. Due to its more efficient graphene-mediated charge-transfer kinetics, the as-grown Mo 2 C-on-graphene heterostructure shows a much lower onset voltage for hydrogen evolution reactions as compared to Mo 2 C-only electrodes. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Development of Large Area CsI Photocathodes for the ALICE/HMPID RICH Detector

    CERN Document Server

    Hoedlmoser, H; Schyns, E

    2005-01-01

    The work carried out within the framework of this PhD deals with the measurement of the photoelectric properties of large area thin film Cesium Iodide (CsI) photocathodes (PCs) which are to be used as a photon converter in a proximity focusing RICH detector for High Momentum Particle Identification (HMPID) in the ALICE experiment at the LHC. The objective was to commission a VUV-scanner setup for in-situ measurements of the photoelectric response of the CsI PCs immediately after the thin film coating process and the use of this system to investigate the properties of these photon detectors. Prior to this work and prior to the finalization of the ALICE/HMPID detector design, R&D work investigating the properties of CsI PCs had been performed at CERN and at other laboratories in order to determine possible substrates and optimized thin film coating procedures. These R&D studies were usually carried out with small samples on different substrates and with various procedures with sometimes ambiguous result...

  13. A large area imaging gas scintillation proportional counter for use in X-ray astronomy

    Science.gov (United States)

    Ku, W. H.-M.; Lum, K. S.; Vartanian, M. H.

    1984-01-01

    A large area (200 sq cm), broad bandwidth (0.1-70 keV), imaging gas scintillation proportional counter (IGSPC) has been constructed for use in X-ray astronomy. The IGSPC consists of a high pressure xenon gas scintillation proportional counter (GSPC) coupled to a multi-wire proportional counter (MWPC) via a calcium fluoride window. THe MWPC, filled with a mixture of argon, methane, and tetrakis (dimethylamino) ethylene, detects the UV photons emitted by the xenon gas in the GSPC. The detector has a measured energy resolution of 8.0 percent (FWHM) and 4.3 percent (FWHM) at 5.9 keV and 22.1 keV, respectively. The predicted spatial resolution of the detector is less than 1 mm (FWHM) between 3-22 keV and 37-60 keV. A method to determine the three-dimensional location of detected X-rays is described. In addition, a combination of discrimination schemes designed to reduce the non-X-ray background in the IGSPC by more than two orders of magnitude is discussed.

  14. Large-Area WS2 Film with Big Single Domains Grown by Chemical Vapor Deposition

    Science.gov (United States)

    Liu, Pengyu; Luo, Tao; Xing, Jie; Xu, Hong; Hao, Huiying; Liu, Hao; Dong, Jingjing

    2017-10-01

    High-quality WS2 film with the single domain size up to 400 μm was grown on Si/SiO2 wafer by atmospheric pressure chemical vapor deposition. The effects of some important fabrication parameters on the controlled growth of WS2 film have been investigated in detail, including the choice of precursors, tube pressure, growing temperature, holding time, the amount of sulfur powder, and gas flow rate. By optimizing the growth conditions at one atmospheric pressure, we obtained tungsten disulfide single domains with an average size over 100 μm. Raman spectra, atomic force microscopy, and transmission electron microscopy provided direct evidence that the WS2 film had an atomic layer thickness and a single-domain hexagonal structure with a high crystal quality. And the photoluminescence spectra indicated that the tungsten disulfide films showed an evident layer-number-dependent fluorescence efficiency, depending on their energy band structure. Our study provides an important experimental basis for large-area, controllable preparation of atom-thick tungsten disulfide thin film and can also expedite the development of scalable high-performance optoelectronic devices based on WS2 film.

  15. Development of large area hybrid photodiodes for the LHCb ring imaging Cherenkov detectors

    CERN Document Server

    Braem, André; Dulinski, W; Filthaut, Frank; Go, A; Joram, C; Lion, G; Séguinot, Jacques; Weilhammer, Peter; Wicht, P; Ypsilantis, Thomas

    1999-01-01

    We report on the development of large area hybrid photodiodes (HPD) which are one of the proposed photodetectors for the RICH counters of the LHCb experiment. The HPD's consist of a cylindrical vacuum envelope of 127 mm diameter capped with a spherical borosilicate UV- glass entrance window. Focusing electrodes demagnify the image on a silicon detector of 50 mm diameter comprising 2048 pads with a surface of 1 mm/sup 2/ each. The analogue readout electronics is integrated in the vacuum tube. As an intermediate step a HPD with a UV sensitive CsI photocathode has been produced which allowed to verify the electron optics of the HPD. A large UHV evaporation plant for the production of HPD's with visible light transmissive bialkali photocathodes (K/sub 2/CsSb) has been built and successfully operated. The evaporation process is optimized for maximum quantum efficiency and life time of the photocathodes. A cold indium sealing technique developed for a minimum thermal load of the photocathode and the silicon sensor ...

  16. Development of large area hybrid photodiodes for the LHCb ring imaging Cherenkov detectors

    CERN Document Server

    Chesi, Enrico Guido; Go, A; Joram, C; Séguinot, Jacques; Ypsilantis, Thomas; Ypsilantis, Thomas

    1998-01-01

    98-037 We report on the development of large area hybrid photo diodes (HPD) which are one of the proposed photodetectors for the RICH counters of the LHCb experiment. The HPD's consist of a cylindrical vacuum envelope of 127 mm diameter capped with a spherical borosilicate UV-glass entrance window. Focusing electrodes demagnify the image on a silicon detector of 50~mm diameter comprising 2048 pads with a surface of 1~mm$^2$ each. The analogue readout electronics is integrated in the vacuum tube. As an intermediate step a HPD with a UV sensitive CsI photocathode has been produced which allowed to verify the electron optics of the HPD. A large UHV evaporation plant for the production of HPD's with visible light transmittive bialkali photocathodes (K$_2$CsSb) has been built and successfully operated. The evaporation process is optimized for maximum quantum efficiency and life time of the photocathodes. A cold Indium sealing technique developed for a minimum thermal load of the photocathode and the silicon sensor...

  17. The Second Fermi Large Area Telescope Catalog of Gamma-Ray Pulsars

    Science.gov (United States)

    Abdo, A. A.; Ajello, M.; Allafort, A.; Baldini, L.; Ballet, J.; Barbiellini, G.; Baring, M. G.; Bastieri, D.; Belfiore, A.; Bellazzini, R.; Bhattacharyya, B.; Bissaldi, E.; Bloom, E. D.; Bonamente, E.; Bottacini, E.; Brandt, T. J.; Bregeon, J.; Brigida, M.; Bruel, P.; Buehler, R.; Burgay, M.; Burnett, T. H.; Busetto, G.; Buson, S.; Caliandro, G. A.; Cameron, R. A.; Camilo, F.; Caraveo, P. A.; Casandjian, J. M.; Cecchi, C.; Çelik, Ö.; Charles, E.; Chaty, S.; Chaves, R. C. G.; Chekhtman, A.; Chen, A. W.; Chiang, J.; Chiaro, G.; Ciprini, S.; Claus, R.; Cognard, I.; Cohen-Tanugi, J.; Cominsky, L. R.; Conrad, J.; Cutini, S.; D'Ammando, F.; de Angelis, A.; DeCesar, M. E.; De Luca, A.; den Hartog, P. R.; de Palma, F.; Dermer, C. D.; Desvignes, G.; Digel, S. W.; Di Venere, L.; Drell, P. S.; Drlica-Wagner, A.; Dubois, R.; Dumora, D.; Espinoza, C. M.; Falletti, L.; Favuzzi, C.; Ferrara, E. C.; Focke, W. B.; Franckowiak, A.; Freire, P. C. C.; Funk, S.; Fusco, P.; Gargano, F.; Gasparrini, D.; Germani, S.; Giglietto, N.; Giommi, P.; Giordano, F.; Giroletti, M.; Glanzman, T.; Godfrey, G.; Gotthelf, E. V.; Grenier, I. A.; Grondin, M.-H.; Grove, J. E.; Guillemot, L.; Guiriec, S.; Hadasch, D.; Hanabata, Y.; Harding, A. K.; Hayashida, M.; Hays, E.; Hessels, J.; Hewitt, J.; Hill, A. B.; Horan, D.; Hou, X.; Hughes, R. E.; Jackson, M. S.; Janssen, G. H.; Jogler, T.; Jóhannesson, G.; Johnson, R. P.; Johnson, A. S.; Johnson, T. J.; Johnson, W. N.; Johnston, S.; Kamae, T.; Kataoka, J.; Keith, M.; Kerr, M.; Knödlseder, J.; Kramer, M.; Kuss, M.; Lande, J.; Larsson, S.; Latronico, L.; Lemoine-Goumard, M.; Longo, F.; Loparco, F.; Lovellette, M. N.; Lubrano, P.; Lyne, A. G.; Manchester, R. N.; Marelli, M.; Massaro, F.; Mayer, M.; Mazziotta, M. N.; McEnery, J. E.; McLaughlin, M. A.; Mehault, J.; Michelson, P. F.; Mignani, R. P.; Mitthumsiri, W.; Mizuno, T.; Moiseev, A. A.; Monzani, M. E.; Morselli, A.; Moskalenko, I. V.; Murgia, S.; Nakamori, T.; Nemmen, R.; Nuss, E.; Ohno, M.; Ohsugi, T.; Orienti, M.; Orlando, E.; Ormes, J. F.; Paneque, D.; Panetta, J. H.; Parent, D.; Perkins, J. S.; Pesce-Rollins, M.; Pierbattista, M.; Piron, F.; Pivato, G.; Pletsch, H. J.; Porter, T. A.; Possenti, A.; Rainò, S.; Rando, R.; Ransom, S. M.; Ray, P. S.; Razzano, M.; Rea, N.; Reimer, A.; Reimer, O.; Renault, N.; Reposeur, T.; Ritz, S.; Romani, R. W.; Roth, M.; Rousseau, R.; Roy, J.; Ruan, J.; Sartori, A.; Saz Parkinson, P. M.; Scargle, J. D.; Schulz, A.; Sgrò, C.; Shannon, R.; Siskind, E. J.; Smith, D. A.; Spandre, G.; Spinelli, P.; Stappers, B. W.; Strong, A. W.; Suson, D. J.; Takahashi, H.; Thayer, J. G.; Thayer, J. B.; Theureau, G.; Thompson, D. J.; Thorsett, S. E.; Tibaldo, L.; Tibolla, O.; Tinivella, M.; Torres, D. F.; Tosti, G.; Troja, E.; Uchiyama, Y.; Usher, T. L.; Vandenbroucke, J.; Vasileiou, V.; Venter, C.; Vianello, G.; Vitale, V.; Wang, N.; Weltevrede, P.; Winer, B. L.; Wolff, M. T.; Wood, D. L.; Wood, K. S.; Wood, M.; Yang, Z.

    2013-10-01

    This catalog summarizes 117 high-confidence >=0.1 GeV gamma-ray pulsar detections using three years of data acquired by the Large Area Telescope (LAT) on the Fermi satellite. Half are neutron stars discovered using LAT data through periodicity searches in gamma-ray and radio data around LAT unassociated source positions. The 117 pulsars are evenly divided into three groups: millisecond pulsars, young radio-loud pulsars, and young radio-quiet pulsars. We characterize the pulse profiles and energy spectra and derive luminosities when distance information exists. Spectral analysis of the off-peak phase intervals indicates probable pulsar wind nebula emission for four pulsars, and off-peak magnetospheric emission for several young and millisecond pulsars. We compare the gamma-ray properties with those in the radio, optical, and X-ray bands. We provide flux limits for pulsars with no observed gamma-ray emission, highlighting a small number of gamma-faint, radio-loud pulsars. The large, varied gamma-ray pulsar sample constrains emission models. Fermi's selection biases complement those of radio surveys, enhancing comparisons with predicted population distributions.

  18. Antibacterial activity of large-area monolayer graphene film manipulated by charge transfer

    Science.gov (United States)

    Li, Jinhua; Wang, Gang; Zhu, Hongqin; Zhang, Miao; Zheng, Xiaohu; di, Zengfeng; Liu, Xuanyong; Wang, Xi

    2014-03-01

    Graphene has attracted increasing attention for potential applications in biotechnology due to its excellent electronic property and biocompatibility. Here we use both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) to investigate the antibacterial actions of large-area monolayer graphene film on conductor Cu, semiconductor Ge and insulator SiO2. The results show that the graphene films on Cu and Ge can surprisingly inhibit the growth of both bacteria, especially the former. However, the proliferation of both bacteria cannot be significantly restricted by the graphene film on SiO2. The morphology of S. aureus and E. coli on graphene films further confirms that the direct contact of both bacteria with graphene on Cu and Ge can cause membrane damage and destroy membrane integrity, while no evident membrane destruction is induced by graphene on SiO2. From the viewpoint of charge transfer, a plausible mechanism is proposed here to explain this phenomenon. This study may provide new insights for the better understanding of antibacterial actions of graphene film and for the better designing of graphene-based antibiotics or other biomedical applications.

  19. Transparent self-cleaning lubricant-infused surfaces made with large-area breath figure patterns

    Science.gov (United States)

    Zhang, Pengfei; Chen, Huawei; Zhang, Liwen; Ran, Tong; Zhang, Deyuan

    2015-11-01

    Nepenthes pitcher inspired slippery lubricant-infused porous surfaces greatly impact the understanding of liquid-repellent surfaces construction and have attracted extensive attention in recent years due to their potential applications in self-cleaning, anti-fouling, anti-icing, etc. In this work, we have successfully fabricated transparent slippery lubricant-infused surfaces based on breath figure patterns (BFPs). Large-area BFPs with interconnected pores were initially formed on the glass substrate and then a suitable lubricant was added onto the surfaces. The interconnected pores in BFPs were able to hold the lubricant liquid in place and form a stable liquid/solid composite surface capable of repelling a variety of liquids. The liquid-repellent surfaces show extremely low critical sliding angles for various liquids, thus providing the surfaces with efficient self-cleaning property. It was also found that the liquid droplets' sliding behaviors on the surfaces were significantly influenced by the tilting angle of the substrate, liquid volume, liquid chemical properties, and pore sizes of the surfaces.

  20. Use of Polycrystalline Ice for Assembly of Large Area Au Nanoparticle Superstructures as SERS Substrates.

    Science.gov (United States)

    Bekana, Deribachew; Liu, Rui; Amde, Meseret; Liu, Jing-Fu

    2017-01-11

    It is still a great challenge to develop simple and low-cost methods for preparation of surface-enhanced Raman scattering (SERS) substrates with high sensitivity and reproducibility. Taking advantage of the microstructure of polycrystalline ice, we developed a new method to assemble large area gold nanoparticle (AuNP) superstructures as SERS substrates without external templating and aggregating agent. The assembly was conducted by freezing AuNP colloid at -20 °C, which concentrated AuNPs in the ice veins and produced an AuNP superstructure upon thawing the ice. The AuNP superstructures exhibited high SERS activity with enhancement factors on the order of 7.63 × 107 owing to the high-density hot spots throughout the superstructures. The SERS activity was found to increase with particle size and aggregate size of AuNP superstructures. Besides, the substrates showed good uniformity and reproducibility with relative standard deviations of 11.9% and 12.4%, respectively. The substrates showed long-term stability, maintaining SERS activity over a period of five months without noticeable change in morphology of the superstructures. The substrates was further used for label-free detection of trace Thiram on apple fruit with high sensitivity down to the concentration of 0.28 ng/cm2, offering great potential to monitor Thiram levels in foodstuffs and environmental samples.

  1. The second FERMI large area telescope catalog of gamma-ray pulsars

    Energy Technology Data Exchange (ETDEWEB)

    Abdo, A. A.; Ajello, M.; Allafort, A.; Baldini, L.; Ballet, J.; Barbiellini, G.; Baring, M. G.; Bastieri, D.; Belfiore, A.; Bellazzini, R.; Bhattacharyya, B.; Bissaldi, E.; Bloom, E. D.; Bonamente, E.; Bottacini, E.; Brandt, T. J.; Bregeon, J.; Brigida, M.; Bruel, P.; Buehler, R.; Burgay, M.; Burnett, T. H.; Busetto, G.; Buson, S.; Caliandro, G. A.; Cameron, R. A.; Camilo, F.; Caraveo, P. A.; Casandjian, J. M.; Cecchi, C.; Çelik, Ö.; Charles, E.; Chaty, S.; Chaves, R. C. G.; Chekhtman, A.; Chen, A. W.; Chiang, J.; Chiaro, G.; Ciprini, S.; Claus, R.; Cognard, I.; Cohen-Tanugi, J.; Cominsky, L. R.; Conrad, J.; Cutini, S.; D' Ammando, F.; de Angelis, A.; DeCesar, M. E.; De Luca, A.; den Hartog, P. R.; de Palma, F.; Dermer, C. D.; Desvignes, G.; Digel, S. W.; Di Venere, L.; Drell, P. S.; Drlica-Wagner, A.; Dubois, R.; Dumora, D.; Espinoza, C. M.; Falletti, L.; Favuzzi, C.; Ferrara, E. C.; Focke, W. B.; Franckowiak, A.; Freire, P. C. C.; Funk, S.; Fusco, P.; Gargano, F.; Gasparrini, D.; Germani, S.; Giglietto, N.; Giommi, P.; Giordano, F.; Giroletti, M.; Glanzman, T.; Godfrey, G.; Gotthelf, E. V.; Grenier, I. A.; Grondin, M. -H.; Grove, J. E.; Guillemot, L.; Guiriec, S.; Hadasch, D.; Hanabata, Y.; Harding, A. K.; Hayashida, M.; Hays, E.; Hessels, J.; Hewitt, J.; Hill, A. B.; Horan, D.; Hou, X.; Hughes, R. E.; Jackson, M. S.; Janssen, G. H.; Jogler, T.; Jóhannesson, G.; Johnson, R. P.; Johnson, A. S.; Johnson, T. J.; Johnson, W. N.; Johnston, S.; Kamae, T.; Kataoka, J.; Keith, M.; Kerr, M.; Knödlseder, J.; Kramer, M.; Kuss, M.; Lande, J.; Larsson, S.; Latronico, L.; Lemoine-Goumard, M.; Longo, F.; Loparco, F.; Lovellette, M. N.; Lubrano, P.; Lyne, A. G.; Manchester, R. N.; Marelli, M.; Massaro, F.; Mayer, M.; Mazziotta, M. N.; McEnery, J. E.; McLaughlin, M. A.; Mehault, J.; Michelson, P. F.; Mignani, R. P.; Mitthumsiri, W.; Mizuno, T.; Moiseev, A. A.; Monzani, M. E.; Morselli, A.; Moskalenko, I. V.; Murgia, S.; Nakamori, T.; Nemmen, R.; Nuss, E.; Ohno, M.; Ohsugi, T.; Orienti, M.; Orlando, E.; Ormes, J. F.; Paneque, D.; Panetta, J. H.; Parent, D.; Perkins, J. S.; Pesce-Rollins, M.; Pierbattista, M.; Piron, F.; Pivato, G.; Pletsch, H. J.; Porter, T. A.; Possenti, A.; Rainò, S.; Rando, R.; Ransom, S. M.; Ray, P. S.; Razzano, M.; Rea, N.; Reimer, A.; Reimer, O.; Renault, N.; Reposeur, T.; Ritz, S.; Romani, R. W.; Roth, M.; Rousseau, R.; Roy, J.; Ruan, J.; Sartori, A.; Saz Parkinson, P. M.; Scargle, J. D.; Schulz, A.; Sgrò, C.; Shannon, R.; Siskind, E. J.; Smith, D. A.; Spandre, G.; Spinelli, P.; Stappers, B. W.; Strong, A. W.; Suson, D. J.; Takahashi, H.; Thayer, J. G.; Thayer, J. B.; Theureau, G.; Thompson, D. J.; Thorsett, S. E.; Tibaldo, L.; Tibolla, O.; Tinivella, M.; Torres, D. F.; Tosti, G.; Troja, E.; Uchiyama, Y.; Usher, T. L.; Vandenbroucke, J.; Vasileiou, V.; Venter, C.; Vianello, G.; Vitale, V.; Wang, N.; Weltevrede, P.; Winer, B. L.; Wolff, M. T.; Wood, D. L.; Wood, K. S.; Wood, M.; Yang, Z.

    2013-09-19

    This catalog summarizes 117 high-confidence ≥0.1 GeV gamma-ray pulsar detections using three years of data acquired by the Large Area Telescope (LAT) on the Fermi satellite. Half are neutron stars discovered using LAT data through periodicity searches in gamma-ray and radio data around LAT unassociated source positions. The 117 pulsars are evenly divided into three groups: millisecond pulsars, young radio-loud pulsars, and young radio-quiet pulsars. We characterize the pulse profiles and energy spectra and derive luminosities when distance information exists. Spectral analysis of the off-peak phase intervals indicates probable pulsar wind nebula emission for four pulsars, and off-peak magnetospheric emission for several young and millisecond pulsars. We compare the gamma-ray properties with those in the radio, optical, and X-ray bands. We provide flux limits for pulsars with no observed gamma-ray emission, highlighting a small number of gamma-faint, radio-loud pulsars. The large, varied gamma-ray pulsar sample constrains emission models. Fermi's selection biases complement those of radio surveys, enhancing comparisons with predicted population distributions.

  2. Large-area few-layer MoS 2 deposited by sputtering

    KAUST Repository

    Huang, Jyun-Hong

    2016-06-06

    Direct magnetron sputtering of transition metal dichalcogenide targets is proposed as a new approach for depositing large-area two-dimensional layered materials. Bilayer to few-layer MoS2 deposited by magnetron sputtering followed by post-deposition annealing shows superior area scalability over 20 cm(2) and layer-by-layer controllability. High crystallinity of layered MoS2 was confirmed by Raman, photo-luminescence, and transmission electron microscopy analysis. The sputtering temperature and annealing ambience were found to play an important role in the film quality. The top-gate field-effect transistor by using the layered MoS2 channel shows typical n-type characteristics with a current on/off ratio of approximately 10(4). The relatively low mobility is attributed to the small grain size of 0.1-1 mu m with a trap charge density in grain boundaries of the order of 10(13) cm(-2).

  3. OBSERVATIONS OF ENERGETIC HIGH MAGNETIC FIELD PULSARS WITH THE FERMI LARGE AREA TELESCOPE

    Energy Technology Data Exchange (ETDEWEB)

    Parent, D.; Abdo, A. A. [College of Science, George Mason University, Fairfax, VA 22030 (United States); Kerr, M.; Den Hartog, P. R.; Romani, R. W.; Watters, K.; Craig, H. A. [W. W. Hansen Experimental Physics Laboratory, Kavli Institute for Particle Astrophysics and Cosmology, Department of Physics and SLAC National Accelerator Laboratory, Stanford University, Stanford, CA 94305 (United States); Baring, M. G. [Rice University, Department of Physics and Astronomy, MS-108, P.O. Box 1892, Houston, TX 77251 (United States); DeCesar, M. E.; Harding, A. K. [NASA Goddard Space Flight Center, Greenbelt, MD 20771 (United States); Espinoza, C. M.; Stappers, B. W.; Weltevrede, P. [Jodrell Bank Centre for Astrophysics, School of Physics and Astronomy, The University of Manchester, M13 9PL (United Kingdom); Gotthelf, E. V.; Camilo, F. [Columbia Astrophysics Laboratory, Columbia University, New York, NY 10027 (United States); Johnston, S. [CSIRO Astronomy and Space Science, Australia Telescope National Facility, P.O. Box 76, Epping NSW 1710 (Australia); Kaspi, V. M.; Livingstone, M. [Department of Physics, McGill University, Montreal, PQ, H3A 2T8 (Canada); Burgay, M. [INAF-Cagliari Astronomical Observatory, I-09012 Capoterra (Italy); Freire, P. C. C., E-mail: dmnparent@gmail.com, E-mail: kerrm@stanford.edu, E-mail: hartog@stanford.edu [Max-Planck-Institut fuer Radioastronomie, Auf dem Huegel 69, 53121 Bonn (Germany); and others

    2011-12-20

    We report the detection of {gamma}-ray pulsations from the high-magnetic-field rotation-powered pulsar PSR J1119-6127 using data from the Fermi Large Area Telescope. The {gamma}-ray light curve of PSR J1119-6127 shows a single, wide peak offset from the radio peak by 0.43 {+-} 0.02 in phase. Spectral analysis suggests a power law of index 1.0 {+-} 0.3{sup +0.4}{sub -0.2} with an energy cutoff at 0.8 {+-} 0.2{sup +2.0}{sub -0.5} GeV. The first uncertainty is statistical and the second is systematic. We discuss the emission models of PSR J1119-6127 and demonstrate that despite the object's high surface magnetic field-near that of magnetars-the field strength and structure in the {gamma}-ray emitting zone are apparently similar to those of typical young pulsars. Additionally, we present upper limits on the {gamma}-ray pulsed emission for the magnetically active PSR J1846-0258 in the supernova remnant Kesteven 75 and two other energetic high-B pulsars, PSRs J1718-3718 and J1734-3333. We explore possible explanations for the non-detection of these three objects, including peculiarities in their emission geometry.

  4. Micro- and nanoscale electrical characterization of large-area graphene transferred to functional substrates

    Directory of Open Access Journals (Sweden)

    Gabriele Fisichella

    2013-04-01

    Full Text Available Chemical vapour deposition (CVD on catalytic metals is one of main approaches for high-quality graphene growth over large areas. However, a subsequent transfer step to an insulating substrate is required in order to use the graphene for electronic applications. This step can severely affect both the structural integrity and the electronic properties of the graphene membrane. In this paper, we investigated the morphological and electrical properties of CVD graphene transferred onto SiO2 and on a polymeric substrate (poly(ethylene-2,6-naphthalene dicarboxylate, briefly PEN, suitable for microelectronics and flexible electronics applications, respectively. The electrical properties (sheet resistance, mobility, carrier density of the transferred graphene as well as the specific contact resistance of metal contacts onto graphene were investigated by using properly designed test patterns. While a sheet resistance Rsh ≈ 1.7 kΩ/sq and a specific contact resistance ρc ≈ 15 kΩ·μm have been measured for graphene transferred onto SiO2, about 2.3× higher Rsh and about 8× higher ρc values were obtained for graphene on PEN. High-resolution current mapping by torsion resonant conductive atomic force microscopy (TRCAFM provided an insight into the nanoscale mechanisms responsible for the very high ρc in the case of graphene on PEN, showing a ca. 10× smaller “effective” area for current injection than in the case of graphene on SiO2.

  5. Efficient heat generation in large-area graphene films by electromagnetic wave absorption

    Science.gov (United States)

    Kang, Sangmin; Choi, Haehyun; Lee, Soo Bin; Park, Seong Chae; Park, Jong Bo; Lee, Sangkyu; Kim, Youngsoo; Hong, Byung Hee

    2017-06-01

    Graphene has been intensively studied due to its outstanding electrical and thermal properties. Recently, it was found that the heat generation by Joule heating of graphene is limited by the conductivity of graphene. Here we suggest an alternative method to generate heat on a large-area graphene film more efficiently by utilizing the unique electromagnetic (EM) wave absorption property of graphene. The EM wave induces an oscillating magnetic moment generated by the orbital motion of moving electrons, which efficiently absorbs the EM energy and dissipate it as a thermal energy. In this case, the mobility of electron is more important than the conductivity, because the EM-induced diamagnetic moment is directly proportional to the speed of electron in an orbital motion. To control the charge carrier mobility of graphene we functionalized substrates with self-assembled monolayers (SAM). As the result, we find that the graphene showing the Dirac voltage close to zero can be more efficiently heated by EM waves. In addition, the temperature gradient also depends on the number of graphene. We expect that the efficient and fast heating of graphene films by EM waves can be utilized for smart heating windows and defogging windshields.

  6. Ultrathin Fluidic Laminates for Large-Area Façade Integration and Smart Windows.

    Science.gov (United States)

    Heiz, Benjamin P V; Pan, Zhiwen; Lautenschläger, Gerhard; Sirtl, Christin; Kraus, Matthias; Wondraczek, Lothar

    2017-03-01

    Buildings represent more than 40% of Europe's energy demands and about one third of its CO2 emissions. Energy efficient buildings and, in particular, building skins have therefore been among the key priorities of international research agendas. Here, glass-glass fluidic devices are presented for large-area integration with adaptive façades and smart windows. These devices enable harnessing and dedicated control of various liquids for added functionality in the building envelope. Combining a microstructured glass pane, a thin cover sheet with tailored mechanical performance, and a liquid for heat storage and transport, a flat-panel laminate is generated with thickness adapted to a single glass sheet in conventional windows. Such multimaterial devices can be integrated with state-of-the-art window glazings or façades to harvest and distribute thermal as well as solar energy by wrapping buildings into a fluidic layer. High visual transparency is achieved through adjusting the optical properties of the employed liquid. Also secondary functionality, such as chromatic windows, polychromatism, or adaptive energy uptake can be generated on part of the liquid.

  7. Fast and precise large area metrology of micropattern detectors using laser distance sensors

    Science.gov (United States)

    Müller, R.; Biebel, O.; Hertenberger, R.; Lösel, P.; Schaile, O.

    2016-07-01

    Novel developments in micropattern detector technology require fast and precise methods to measure large area topologies in the order of a few square meters. Standard tactile coordinate measurement systems have resolutions better 10 μm, but suffer from relatively long measuring time of several hours for one cycle. Sensitive structures may be damaged when touched by the tactile sensor. We present a method using laser distance sensors. Such a device is able to scan surfaces fast without touching them. The presented device has the capability to measure semitransparent surfaces. The vertical translator to mount the sensor is able to move in sub-mm steps. Using this we are able to measure the position and height of copper on FR4 with an accuracy better than 10 μm. We report on the performance of the sensor scanning non-transparent as well as semi-transparent surfaces. This includes studies to minimize the measurement time without a loss in resolution. Our method to calibrate the measurement system will also be shown. This calibration is needed to reach a resolution better than 10 μm.

  8. Large-area, conductive and flexible reduced graphene oxide (RGO) membrane fabricated by electrophoretic deposition (EPD).

    Science.gov (United States)

    Wang, Mei; Duong, Le Dai; Oh, Joon-Suk; Mai, Nguyen Thi; Kim, Sanghoon; Hong, Seungchul; Hwang, Taeseon; Lee, Youngkwan; Nam, Jae-Do

    2014-02-12

    A large-area, conductive, and flexible membrane made from the stabilized aqueous solution of reduced graphene oxide (RGO) is successfully fabricated using an electrophoretic deposition (EPD) method. A low-voltage operation of EPD (∼3 volts) allows a robust consolidation of RGO layers desirably aligned in the in-plane direction through the cohesive electrophoretic squeezing force near the current collector. Transferring the deposited RGO layers to arbitrary substrates or achieving as a free-standing form, two methods of "chemical etching" and "electrochemical etching" are developed to detach the RGO layers from the EPD current collector without damaging the deposited RGO. Further reducing the free-standing RGO membrane by thermal annealing up to 1000 °C, a graphite-like architecture is restored (d-spacing at 3.42 Å with C/O ratio at 16.66) and the electrical conductivity increases as high as 5.51 × 10(5) S/m. The tightly-consolidated and securely-detached RGO membrane allows the free-standing and flexible features and highly conductive characteristics, which are further developed during thermal treatment. Because of the facile scale-up nature of the EPD process and RGO solution, the developed methodology has a considerable potential to be applied to various energy storage devices, flexible conductive coatings, and other electrochemical systems.

  9. Antibacterial activity of large-area monolayer graphene film manipulated by charge transfer

    Science.gov (United States)

    Li, Jinhua; Wang, Gang; Zhu, Hongqin; Zhang, Miao; Zheng, Xiaohu; Di, Zengfeng; Liu, Xuanyong; Wang, Xi

    2014-01-01

    Graphene has attracted increasing attention for potential applications in biotechnology due to its excellent electronic property and biocompatibility. Here we use both Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) to investigate the antibacterial actions of large-area monolayer graphene film on conductor Cu, semiconductor Ge and insulator SiO2. The results show that the graphene films on Cu and Ge can surprisingly inhibit the growth of both bacteria, especially the former. However, the proliferation of both bacteria cannot be significantly restricted by the graphene film on SiO2. The morphology of S. aureus and E. coli on graphene films further confirms that the direct contact of both bacteria with graphene on Cu and Ge can cause membrane damage and destroy membrane integrity, while no evident membrane destruction is induced by graphene on SiO2. From the viewpoint of charge transfer, a plausible mechanism is proposed here to explain this phenomenon. This study may provide new insights for the better understanding of antibacterial actions of graphene film and for the better designing of graphene-based antibiotics or other biomedical applications. PMID:24619247

  10. Exploring and rationalising effective n-doping of large area CVD-graphene by NH3.

    Science.gov (United States)

    Bianco, G V; Losurdo, M; Giangregorio, M M; Capezzuto, P; Bruno, G

    2014-02-28

    Despite the large number of papers on the NH3 doping of graphene, the achievement of stable n-doped large area CVD (chemical vapor deposition) graphene, which is intrinsically p-doped, is still challenging. A control of the NH3 chemisorption and of the N-bond configuration is still needed. The feasibility of a room temperature high pressure NH3 treatment of CVD graphene to achieve n-type doping is shown here. We use and correlate data for (a) sheet resistance, R(sh), and the Hall coefficient, R(H), in van der Pauw configuration, acquired in real time during the NH3 doping of CVD-graphene on a glass substrate, (b) optical measurements of the effect of doping on the graphene Van Hove singularity point at 4.6 eV in the dielectric function spectra by spectroscopic ellipsometry, and of (c) N-bond configuration by XPS to better understand and, finally, control the NH3 doping of graphene. The discussion is focused on the thermal and time stability of the n-doping after air exposure. A chemical rationale is provided for the NH3 n-doping based on the interaction of (i) NH3 with intrinsic oxygen functionalities and defects of CVD graphene and of (ii) C-NH2 doping centers with acceptor species present in the air.

  11. Gamma Ray Large Area Space Telescope (GLAST) Balloon Flight Data Handling Overview

    Energy Technology Data Exchange (ETDEWEB)

    Rochester, Leon S

    2002-09-25

    The GLAST Balloon Flight Engineering Model (BFEM) represents one of 16 towers that constitute the Large Area Telescope (LAT), a high-energy (>20 MeV) gamma-ray pair-production telescope being built by an international partnership of astrophysicists and particle physicists for a satellite launch in 2006. The prototype tower consists of a Pb/Si pair-conversion tracker (TKR), a CsI hodoscopic calorimeter (CAL), an anti-coincidence detector (ACD) and an autonomous data acquisition system (DAQ). The self-triggering capabilities and performance of the detector elements have been previously characterized using positron, photon and hadron beams. External target scintillators were placed above the instrument to act as sources of hadronic showers. This paper provides a comprehensive description of the BFEM data-reduction process, from receipt of the flight data from telemetry through event reconstruction and background rejection cuts. The goals of the ground analysis presented here are to verify the functioning of the instrument and to validate the reconstruction software and the background-rejection scheme.

  12. APD arrays and large-area APDs via a new planar process

    CERN Document Server

    Farrell, R; Vanderpuye, K; Grazioso, R; Myers, R; Entine, G

    2000-01-01

    A fabrication process has been developed which allows the beveled-edge-type of avalanche photodiode (APD) to be made without the need for the artful bevel formation steps. This new process, applicable to both APD arrays and to discrete detectors, greatly simplifies manufacture and should lead to significant cost reduction for such photodetectors. This is achieved through a simple innovation that allows isolation around the device or array pixel to be brought into the plane of the surface of the silicon wafer, hence a planar process. A description of the new process is presented along with performance data for a variety of APD device and array configurations. APD array pixel gains in excess of 10 000 have been measured. Array pixel coincidence timing resolution of less than 5 ns has been demonstrated. An energy resolution of 6% for 662 keV gamma-rays using a CsI(T1) scintillator on a planar processed large-area APD has been recorded. Discrete APDs with active areas up to 13 cm sup 2 have been operated.

  13. The First Catalog of Active Galactic Nuclei Detected by the Fermi Large Area Telescope

    Science.gov (United States)

    Abdo, A. A.; Ackermann, M.; Ajello, M.; Allafort, A.; Antolini, E.; Atwood, W. B.; Axelsson, M.; Baldini, L.; Ballet, J.; Barbiellini, G.; Bastieri, D.; Baughman, B. M.; Bechtol, K.; Bellazzini, R.; Berenji, B.; Blandford, R. D.; Bloom, E. D.; Bogart, J. R.; Bonamente, E.; Borgland, A. W.; Bouvier, A.; Bregeon, J.; Brez, A.; Brigida, M.; Bruel, P.; Buehler, R.; Burnett, T. H.; Buson, S.; Caliandro, G. A.; Cameron, R. A.; Cannon, A.; Caraveo, P. A.; Carrigan, S.; Casandjian, J. M.; Cavazzuti, E.; Cecchi, C.; Çelik, Ö.; Celotti, A.; Charles, E.; Chekhtman, A.; Chen, A. W.; Cheung, C. C.; Chiang, J.; Ciprini, S.; Claus, R.; Cohen-Tanugi, J.; Conrad, J.; Costamante, L.; Cotter, G.; Cutini, S.; D'Elia, V.; Dermer, C. D.; de Angelis, A.; de Palma, F.; De Rosa, A.; Digel, S. W.; Silva, E. do Couto e.; Drell, P. S.; Dubois, R.; Dumora, D.; Escande, L.; Farnier, C.; Favuzzi, C.; Fegan, S. J.; Ferrara, E. C.; Focke, W. B.; Fortin, P.; Frailis, M.; Fukazawa, Y.; Funk, S.; Fusco, P.; Gargano, F.; Gasparrini, D.; Gehrels, N.; Germani, S.; Giebels, B.; Giglietto, N.; Giommi, P.; Giordano, F.; Giroletti, M.; Glanzman, T.; Godfrey, G.; Grandi, P.; Grenier, I. A.; Grondin, M.-H.; Grove, J. E.; Guiriec, S.; Hadasch, D.; Harding, A. K.; Hayashida, M.; Hays, E.; Healey, S. E.; Hill, A. B.; Horan, D.; Hughes, R. E.; Iafrate, G.; Itoh, R.; Jóhannesson, G.; Johnson, A. S.; Johnson, R. P.; Johnson, T. J.; Johnson, W. N.; Kamae, T.; Katagiri, H.; Kataoka, J.; Kawai, N.; Kerr, M.; Knödlseder, J.; Kuss, M.; Lande, J.; Latronico, L.; Lavalley, C.; Lemoine-Goumard, M.; Llena Garde, M.; Longo, F.; Loparco, F.; Lott, B.; Lovellette, M. N.; Lubrano, P.; Madejski, G. M.; Makeev, A.; Malaguti, G.; Massaro, E.; Mazziotta, M. N.; McConville, W.; McEnery, J. E.; McGlynn, S.; Michelson, P. F.; Mitthumsiri, W.; Mizuno, T.; Moiseev, A. A.; Monte, C.; Monzani, M. E.; Morselli, A.; Moskalenko, I. V.; Murgia, S.; Nolan, P. L.; Norris, J. P.; Nuss, E.; Ohno, M.; Ohsugi, T.; Omodei, N.; Orlando, E.; Ormes, J. F.; Ozaki, M.; Paneque, D.; Panetta, J. H.; Parent, D.; Pelassa, V.; Pepe, M.; Pesce-Rollins, M.; Piranomonte, S.; Piron, F.; Porter, T. A.; Rainò, S.; Rando, R.; Razzano, M.; Reimer, A.; Reimer, O.; Reposeur, T.; Ripken, J.; Ritz, S.; Rodriguez, A. Y.; Romani, R. W.; Roth, M.; Ryde, F.; Sadrozinski, H. F.-W.; Sanchez, D.; Sander, A.; Saz Parkinson, P. M.; Scargle, J. D.; Sgrò, C.; Shaw, M. S.; Siskind, E. J.; Smith, P. D.; Spandre, G.; Spinelli, P.; Starck, J.-L.; Stawarz, Ł.; Strickman, M. S.; Suson, D. J.; Tajima, H.; Takahashi, H.; Takahashi, T.; Tanaka, T.; Taylor, G. B.; Thayer, J. B.; Thayer, J. G.; Thompson, D. J.; Tibaldo, L.; Torres, D. F.; Tosti, G.; Tramacere, A.; Ubertini, P.; Uchiyama, Y.; Usher, T. L.; Vasileiou, V.; Vilchez, N.; Villata, M.; Vitale, V.; Waite, A. P.; Wallace, E.; Wang, P.; Winer, B. L.; Wood, K. S.; Yang, Z.; Ylinen, T.; Ziegler, M.

    2010-05-01

    We present the first catalog of active galactic nuclei (AGNs) detected by the Large Area Telescope (LAT), corresponding to 11 months of data collected in scientific operation mode. The First LAT AGN Catalog (1LAC) includes 671 γ-ray sources located at high Galactic latitudes (|b|>10°) that are detected with a test statistic greater than 25 and associated statistically with AGNs. Some LAT sources are associated with multiple AGNs, and consequently, the catalog includes 709 AGNs, comprising 300 BL Lacertae objects, 296 flat-spectrum radio quasars, 41 AGNs of other types, and 72 AGNs of unknown type. We also classify the blazars based on their spectral energy distributions as archival radio, optical, and X-ray data permit. In addition to the formal 1LAC sample, we provide AGN associations for 51 low-latitude LAT sources and AGN "affiliations" (unquantified counterpart candidates) for 104 high-latitude LAT sources without AGN associations. The overlap of the 1LAC with existing γ-ray AGN catalogs (LBAS, EGRET, AGILE, Swift, INTEGRAL, TeVCat) is briefly discussed. Various properties—such as γ-ray fluxes and photon power-law spectral indices, redshifts, γ-ray luminosities, variability, and archival radio luminosities—and their correlations are presented and discussed for the different blazar classes. We compare the 1LAC results with predictions regarding the γ-ray AGN populations, and we comment on the power of the sample to address the question of the blazar sequence.

  14. Characterization of large area photomultipliers and its application to dark matter search with noble liquid detectors

    Energy Technology Data Exchange (ETDEWEB)

    Bueno, A; Lozano, J; Melgarejo, A J; Munoz, F J; Navarro, J L; Navas, S; Ruiz, A G [Dpto. de Fisica Teorica y del Cosmos and C.A.F.P.E., Universidad de Granada, Campus Fuente Nueva, 18071 Granada (Spain)], E-mail: navas@ugr.es

    2008-01-15

    There is growing interest in the use of noble liquid detectors to study particle properties and search for new phenomena. In particular, these detectors are extremely suitable for performing direct searches for dark matter. In this kind of experiment, the light produced after an interaction within the sensitive volume is usually read-out by photomultipliers. The need to go to masses in the tonne scale to explore deeper regions of the parameter space, calls for the use of large area photomultipliers. In this paper we address the need to perform laboratory calibration measurements of these large photomultipliers, in particular to characterize their behaviour at cryogenic temperatures where no reference data from the manufacturer is available. We present comparative tests of phototubes from two companies. The tests are performed in conditions similar to those of operation in a real experiment. Measurements of the most relevant phototube parameters (quantum efficiency, gain, linearity, etc.) both at room and liquid Argon temperatures are reported. The results show that the studied phototubes comply with the stringent requirements posed by current dark matter searches performed with noble-liquid detectors.

  15. Large area direct-write focused ion-beam lithography with dual-beam microscope.

    Energy Technology Data Exchange (ETDEWEB)

    Imre-Joshi, A.; Ocola, L. E.; Rich, L.; Klingfus, J. (Center for Nanoscale Materials)

    2010-03-01

    The authors have investigated the performance of focused ion-beam (FIB) direct-write lithography for large area (multiple write-field) patterning in an FEI Nova Nanolab 600 dual-beam microscope. Their system is configured with a 100 nm resolution X-Y stage and a RAITH ELPHY LITHOGRAPHY control interface, with its own integrated 16 bit DAC pattern generator and software. Key issues with regard to configuration, process parameters, and procedures have been addressed. Characterization of stitching errors, pattern repeatability, and drift were performed. Offset lithography (multiple exposures with offset write fields) and in-field registration marks were evaluated for correcting stitching errors, and a test microfluidic device covering an area of 1 x 1.4 mm{sup 2} was successfully fabricated. The authors found that by using a combination of offset lithography and in-field registration mark correction methods, the stitching errors can be kept well below 100 nm. They also found that due to higher beam deflection speed provided by the electrostatic scanning in FIB systems versus the wide-spread electron-beam systems with electromagnetic scanning, FIB lithography can be just as fast as electron-beam lithography for typical mill depths down to about 200-500 nm (material dependent). This opens the door for a large suite of applications for materials where pattern transfer is difficult or impossible by reactive methods.

  16. Large Area Solid Radiochemistry (LASR) collector at the National Ignition Facility

    Science.gov (United States)

    Waltz, Cory; Gharibyan, Narek; Hardy, Mike; Shaughnessy, Dawn; Jedlovec, Don; Smith, Cal

    2017-08-01

    The flux of neutrons and charged particles produced from inertial confinement fusion experiments at the National Ignition Facility (NIF) induces measurable concentrations of nuclear reaction products in various target materials. The collection and radiochemical analysis of the post-shot debris can be utilized as an implosion diagnostic to obtain information regarding fuel areal density and ablator-fuel mixing. Furthermore, assessment of the debris from specially designed targets, material doped in capsules or mounted on the external surface of the target assembly, can support experiments relevant to nuclear forensic research. To collect the shot debris, we have deployed the Large Area Solid Radiochemistry Collector (LASR) at NIF. LASR uses a main collector plate that contains a large collection foil with an exposed 20 cm diameter surface located ˜50 cm from the NIF target. This covers ˜0.12 steradians, or about 1% of the total solid angle. We will describe the design, analysis, and operation of this experimental platform as well as the initial results. To speed up the design process 3-dimensional printing was utilized. Design analysis includes the dynamic loading of the NIF target vaporized mass, which was modeled using LS-DYNA.

  17. Large-area, freestanding, single-layer graphene-gold: a hybrid plasmonic nanostructure.

    Science.gov (United States)

    Iyer, Ganjigunte R Swathi; Wang, Jian; Wells, Garth; Guruvenket, Srinivasan; Payne, Scott; Bradley, Michael; Borondics, Ferenc

    2014-06-24

    Graphene-based plasmonic devices have recently drawn great attention. However, practical limitations in fabrication and device architectures prevent studies from being carried out on the intrinsic properties of graphene and their change by plasmonic structures. The influence of a quasi-infinite object (i.e., the substrate) on graphene, being a single sheet of carbon atoms, and the plasmonic device is overwhelming. To address this and put the intrinsic properties of the graphene-plasmonic nanostructures in focus, we fabricate large-area, freestanding, single-layer graphene-gold (LFG-Au) sandwich structures and Au nanoparticle decorated graphene (formed via thermal treatment) hybrid plasmonic nanostructures. We observed two distinct plasmonic enhancement routes of graphene unique to each structure via surface-enhanced Raman spectroscopy. The localized electronic structure variation in the LFG due to graphene-Au interaction at the nanoscale is mapped using scanning transmission X-ray microscopy. The measurements show an optical density of ∼0.007, which is the smallest experimentally determined for single-layer graphene thus far. Our results on freestanding graphene-Au plasmonic structures provide great insight for the rational design and future fabrication of graphene plasmonic hybrid nanostructures.

  18. A Very Large Area Network (VLAN) knowledge-base applied to space communication problems

    Science.gov (United States)

    Zander, Carol S.

    1988-01-01

    This paper first describes a hierarchical model for very large area networks (VLAN). Space communication problems whose solution could profit by the model are discussed and then an enhanced version of this model incorporating the knowledge needed for the missile detection-destruction problem is presented. A satellite network or VLAN is a network which includes at least one satellite. Due to the complexity, a compromise between fully centralized and fully distributed network management has been adopted. Network nodes are assigned to a physically localized group, called a partition. Partitions consist of groups of cell nodes with one cell node acting as the organizer or master, called the Group Master (GM). Coordinating the group masters is a Partition Master (PM). Knowledge is also distributed hierarchically existing in at least two nodes. Each satellite node has a back-up earth node. Knowledge must be distributed in such a way so as to minimize information loss when a node fails. Thus the model is hierarchical both physically and informationally.

  19. Pure crystal orientation and anisotropic charge transport in large-area hybrid perovskite films

    KAUST Repository

    Cho, Nam Chul

    2016-11-10

    Controlling crystal orientations and macroscopic morphology is vital to develop the electronic properties of hybrid perovskites. Here we show that a large-area, orientationally pure crystalline (OPC) methylammonium lead iodide (MAPbI3) hybrid perovskite film can be fabricated using a thermal-gradient-assisted directional crystallization method that relies on the sharp liquid-to-solid transition of MAPbI3 from ionic liquid solution. We find that the OPC films spontaneously form periodic microarrays that are distinguishable from general polycrystalline perovskite materials in terms of their crystal orientation, film morphology and electronic properties. X-ray diffraction patterns reveal that the film is strongly oriented in the (112) and (200) planes parallel to the substrate. This film is structurally confined by directional crystal growth, inducing intense anisotropy in charge transport. In addition, the low trap-state density (7.9 × 1013 cm−3) leads to strong amplified stimulated emission. This ability to control crystal orientation and morphology could be widely adopted in optoelectronic devices.

  20. TORCH: A Large-Area Detector for Precision Time-of-Flight Measurements at LHCb

    CERN Document Server

    Harnew, N

    2012-01-01

    The TORCH (Time Of internally Reflected CHerenkov light) is an innovative high-precision time-of-flight detector which is suitable for large areas, up to tens of square metres, and is being developed for the upgraded LHCb experiment. The TORCH provides a time-of-flight measurement from the imaging of photons emitted in a 1 cm thick quartz radiator, based on the Cherenkov principle. The photons propagate by total internal reflection to the edge of the quartz plane and are then focused onto an array of Micro-Channel Plate (MCP) photon detectors at the periphery of the detector. The goal is to achieve a timing resolution of 15 ps per particle over a flight distance of 10 m. This will allow particle identification in the challenging momentum region up to 20 GeV/c. Commercial MCPs have been tested in the laboratory and demonstrate the required timing precision. An electronics readout system based on the NINO and HPTDC chipset is being developed to evaluate an 8×8 channel TORCH prototype. The simulated performance...

  1. In-Flight Measurement of the Absolute Energy Scale of the Fermi Large Area Telescope

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, M.; /Stanford U., HEPL /SLAC /KIPAC, Menlo Park; Ajello, M.; /Stanford U., HEPL /SLAC /KIPAC, Menlo Park; Allafort, A.; /Stanford U., HEPL /SLAC /KIPAC, Menlo Park; Atwood, W.B.; /UC, Santa Cruz; Axelsson, M.; /Stockholm U. /Stockholm U., OKC /Royal Inst. Tech., Stockholm; Baldini, L.; /INFN, Pisa; Barbiellini, G.; /INFN, Trieste /Trieste U.; Bastieri, D.; /INFN, Padua /Padua U.; Bechtol, K.; /Stanford U., HEPL /SLAC /KIPAC, Menlo Park; Bellazzini, R.; /INFN, Pisa; Berenji, B.; /Stanford U., HEPL /SLAC /KIPAC, Menlo Park; Bloom, E.D.; /Stanford U., HEPL /SLAC /KIPAC, Menlo Park; Bonamente, E.; /INFN, Perugia /Perugia U.; Borgland, A.W.; /Stanford U., HEPL /SLAC /KIPAC, Menlo Park; Bouvier, A.; /UC, Santa Cruz; Bregeon, J.; /INFN, Pisa; Brez, A.; /INFN, Pisa; Brigida, M.; /Bari Polytechnic /INFN, Bari; Bruel, P.; /Ecole Polytechnique; Buehler, R.; /Stanford U., HEPL /SLAC /KIPAC, Menlo Park; Buson, S.; /INFN, Padua /Padua U. /CSIC, Catalunya /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /IASF, Milan /DAPNIA, Saclay /INFN, Perugia /Perugia U. /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /Unlisted, US /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /ASDC, Frascati /Perugia U. /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /Montpellier U. /ASDC, Frascati /Bari Polytechnic /INFN, Bari /Naval Research Lab, Wash., D.C. /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /Montpellier U. /Bari Polytechnic /INFN, Bari /Ecole Polytechnique /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /Ecole Polytechnique /Hiroshima U. /Stanford U., HEPL /SLAC /KIPAC, Menlo Park /Bari Polytechnic /INFN, Bari /INFN, Bari /NASA, Goddard /INFN, Perugia /Perugia U.; /more authors..

    2012-09-20

    The Large Area Telescope (LAT) on-board the Fermi Gamma-ray Space Telescope is a pair-conversion telescope designed to survey the gamma-ray sky from 20 MeV to several hundreds of GeV. In this energy band there are no astronomical sources with sufficiently well known and sharp spectral features to allow an absolute calibration of the LAT energy scale. However, the geomagnetic cutoff in the cosmic ray electron-plus-positron (CRE) spectrum in low Earth orbit does provide such a spectral feature. The energy and spectral shape of this cutoff can be calculated with the aid of a numerical code tracing charged particles in the Earth's magnetic field. By comparing the cutoff value with that measured by the LAT in different geomagnetic positions, we have obtained several calibration points between {approx}6 and {approx}13 GeV with an estimated uncertainty of {approx}2%. An energy calibration with such high accuracy reduces the systematic uncertainty in LAT measurements of, for example, the spectral cutoff in the emission from gamma ray pulsars.

  2. Gas electron multipliers. Development of large area GEMS and spherical GEMS

    Energy Technology Data Exchange (ETDEWEB)

    Pinto, Serge Duarte

    2011-08-15

    Gaseous radiation detectors have been a crucial part of high-energy physics instrumentation since the 1960s, when the first multiwire proportional counters were built. In the 1990s the first micropattern gas detectors (MPGDS) saw the light; with sub-millimeter feature sizes these novel detectors were faster and more accurate than their predecessors. The gas electron multiplier (GEM) is one of the most successful of these technologies. It is a charge multiplication structure made from a copper clad polymer foil, pierced with a regular and dense pattern of holes. I describe the properties and the application of GEMs and GEM. detectors, and the research and development I have done on this technology. Two of the main objectives were the development of large area GEMs ({proportional_to}m{sup 2}) for particle physics experiments and GEMs with a spherical shape for X-ray or neutron diffraction detectors. Both have been realized, and the new techniques involved are finding their way to applications in research and industry. (orig.)

  3. Particle Acceleration in High-Energy Solar Flares Detected by the Fermi Large Area Telescope

    Science.gov (United States)

    Omodei, N.; Pesce-Rollins, M.; Petrosian, V.; Liu, W.; Rubio da Costa, F.

    2016-12-01

    The Fermi Large Area Telescope (LAT) is the most sensitive instrument ever deployed in space for observing gamma-ray emission above 100 MeV. LAT observations of the active Sun have increased the number of detected solar flares by almost a factor of 10 with respect to previous space observations. We will present an overview of these observations, which include detections of impulsive and sustained emission, extending up to 20 hours in the case of the X-class flare occurred on 2012 March 7. Of particular interest is the first detection of >100 MeV gamma-ray emission from three solar flares whose positions behind the limb were confirmed by the STEREO spacecrafts. These observations sample flares from active regions originating from behind both the eastern and western limbs and present a unique opportunity to diagnose the mechanisms of high-energy emission and particle acceleration in solar flares. We will present the Fermi-LAT, RHESSI and STEREO observations of these flares and discuss how these observations provide constrains on different emission mechanisms.

  4. First observation of Cherenkov rings with a large area CsI-TGEM-based RICH prototype

    CERN Document Server

    Peskov, V; Di Mauro, A; Martinengo, P; Mayani, D; Molnar, L; Nappi, E; Paic, G; Smirnov, N; Anand, H; Shukla, I

    2012-01-01

    We have built a RICH detector prototype consisting of a liquid C6F14 radiator and six triple Thick Gaseous Electron Multipliers (TGEMs), each of them having an active area of 10x10 cm2. One triple TGEM has been placed behind the liquid radiator in order to detect the beam particles, whereas the other five have been positioned around the central one at a distance to collect the Cherenkov photons. The upstream electrode of each of the TGEM stacks has been coated with a 0.4 micron thick CsI layer. In this paper, we will present the results from a series of laboratory tests with this prototype carried out using UV light, 6 keV photons from 55Fe and electrons from 90Sr as well as recent results of tests with a beam of charged pions where for the first time Cherenkov Ring images have been successfully recorded with TGEM photodetectors. The achieved results prove the feasibility of building a large area Cherenkov detector consisting of a matrix of TGEMs.

  5. Nanostructure formation and passivation of large-area black silicon for solar cell applications.

    Science.gov (United States)

    Liu, Yaoping; Lai, Tao; Li, Hailing; Wang, Yan; Mei, Zengxia; Liang, Huili; Li, Zhilei; Zhang, Fengming; Wang, Wenjing; Kuznetsov, Andrej Yu; Du, Xiaolong

    2012-05-07

    Nanoscale textured silicon and its passivation are explored by simple low-cost metal-assisted chemical etching and thermal oxidation, and large-area black silicon was fabricated both on single-crystalline Si and multicrystalline Si for solar cell applications. When the Si surface was etched by HF/AgNO(3) solution for 4 or 5 min, nanopores formed in the Si surface, 50-100 nm in diameter and 200-300 nm deep. The nanoscale textured silicon surface turns into an effective medium with a gradually varying refractive index, which leads to the low reflectivity and black appearance of the samples. Mean reflectance was reduced to as low as 2% for crystalline Si and 4% for multicrystalline Si from 300 to 1000 nm, with no antireflective (AR) coating. A black-etched multicrystalline-Si of 156 mm × 156 mm was used to fabricate a primary solar cell with no surface passivation or AR coating. Its conversion efficiency (η) was 11.5%. The cell conversion efficiency was increased greatly by using surface passivation process, which proved very useful in suppressing excess carrier recombination on the nanostructured surface. Finally, a black m-Si cell with efficiency of 15.8% was achieved by using SiO(2) and SiN(X) bilayer passivation structure, indicating that passivation plays a key role in large-scale manufacture of black silicon solar cells. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Uncooled Radiation Hard Large Area SiC X-ray and EUV Detectors and 2D Arrays Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This project seeks to design, fabricate, characterize and commercialize large area, uncooled and radiative hard 4H-SiC EUV ? soft X-ray detectors capable of ultra...

  7. Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating

    National Research Council Canada - National Science Library

    Sandström, Andreas; Dam, Henrik F; Krebs, Frederik C; Edman, Ludvig

    2012-01-01

    The grand vision of manufacturing large-area emissive devices with low-cost roll-to-roll coating methods, akin to how newspapers are produced, appeared with the emergence of the organic light-emitting...

  8. Design of an Electronic Healthcare Record Server Based on Part 1 of ISO EN 13606

    Directory of Open Access Journals (Sweden)

    Tony Austin

    2011-01-01

    Full Text Available ISO EN 13606 is a newly approved standard at European and ISO levels for the meaningful exchange of clinical information between systems. Although conceived as an inter-operability standard to which existing electronic health record (EHR systems will transform legacy data, the requirements met and architectural approach reflected in this standard also make it a good candidate for the internal architecture of an EHR server. The authors have built such a server for the storage of healthcare records and demonstrated that it is possible to use ISO EN 13606 part 1 as the basis of an internal system architecture. The development of the system and some of the applications of the server are described in this paper. It is the first known operational implementation of the standard as an EHR system.

  9. Study on the Evolution of the Current ISO Certifications in Romania

    Directory of Open Access Journals (Sweden)

    Teodor Socaciu

    2013-06-01

    Full Text Available To increase the efficiency and effectiveness of processes within an organization, ISO standards can help both large enterprises and small companies (SMEs, both in industrialized and in developing countries offering solutions and bringing considerable advantages in almost all existing fields. ISO certification brings a set of measures in the areas of an organization, be it about quality, environmental safety, food or protection and safety of personnel, this certification brings benefits both in the current processes and more importantly, the future development plans. In this paper, graphs showing the distributions of increasing certification, demonstrate that more and more companies in Romania have realized that, only implementing and certifying ISO standards, they will be successful in domestic and international market in terms of competition, in particular against European companies.

  10. Comparative advantage: the impact of ISO 14001 environmental certification on exports.

    Science.gov (United States)

    Bellesi, Florencia; Lehrer, David; Tal, Alon

    2005-04-01

    Relative to the enormous acceptance of the ISO 9000 quality standard, the ISO 14001 environmental management certification has been met with only moderate enthusiasm among industrial facilities. The literature on corporate motivation for ISO 14001 participation is relatively modest considering the enormous number of publications reviewing other aspects of its adoption and implementation. It would seem that the present "marketing" package supporting ISO environmental commitments does not seem to offer sufficiently persuasive incentives for increased sales, either domestically or internationally. While researchers assume that a higher export rate of companies is positively associated with higher ISO participation rates, there have been very few empirical studies that support this inference, and conclusions have not been based on data taken from importing countries orfrom a systematic evaluation of expressed corporate preference for products sold by ISO 14001 certified companies. The present study reports the results of a survey to firms in six countries that are Israel's leading trade partners, importing chemicals, textiles, and produce. The survey results confirm that while the international market still considers price and quality as the paramount factors in selection of suppliers, environmental management systems (EMS) are an important feature that is frequently taken into consideration. EMS certification appears to signify a supplier who is managing the business well and exhibiting ethical responsibility. The European market proved to be more environmentally conscious than those in other industrialized parts of the world. EMS offer a particularly valuable advantage for producers wishing to reach European markets. As policy-makers seek to expand the voluntary adoption of EMS, a clear advantage for exporters should be highlighted among national industries.

  11. Development of Standardized Mobile Tracer Correlation Approach for Large Area Emission Measurements (DRAFT UNDER EPA REVIEW)

    Science.gov (United States)

    Foster-wittig, T. A.; Thoma, E.; Green, R.; Hater, G.; Swan, N.; Chanton, J.

    2013-12-01

    Improved understanding of air emissions from large area sources such as landfills, waste water ponds, open-source processing, and agricultural operations is a topic of increasing environmental importance. In many cases, the size of the area source, coupled with spatial-heterogeneity, make direct (on-site) emission assessment difficult; methane emissions, from landfills for example, can be particularly complex [Thoma et al, 2009]. Recently, whole-facility (remote) measurement approaches based on tracer correlation have been utilized [Scheutz et al, 2011]. The approach uses a mobile platform to simultaneously measure a metered-release of a conservative gas (the tracer) along with the target compound (methane in the case of landfills). The known-rate tracer release provides a measure of atmospheric dispersion at the downwind observing location allowing the area source emission to be determined by a ratio calculation [Green et al, 2010]. Although powerful in concept, the approach has been somewhat limited to research applications due to the complexities and cost of the high-sensitivity measurement equipment required to quantify the part-per billion levels of tracer and target gas at kilometer-scale distances. The advent of compact, robust, and easy to use near-infrared optical measurement systems (such as cavity ring down spectroscopy) allow the tracer correlation approach to be investigated for wider use. Over the last several years, Waste Management Inc., the U.S. EPA, and collaborators have conducted method evaluation activities to determine the viability of a standardized approach through execution of a large number of field measurement trials at U.S. landfills. As opposed to previous studies [Scheutz et al, 2011] conducted at night (optimal plume transport conditions), the current work evaluated realistic use-scenarios; these scenarios include execution by non-scientist personnel, daylight operation, and full range of atmospheric condition (all plume transport

  12. Clinical analysis of 54 cases of large area soft tissue avulsion in the lower limb.

    Science.gov (United States)

    Chen, Yu; Liu, Lei

    2016-12-01

    To assess the clinical curative effect of different treatment methods for large area avulsion injury in the lower limb. Between January 2010 and December 2013, 54 patients with large area avulsion injury in the lower limb were treated in the trauma center of our hospital, including 34 males and 20 females with a mean age of 35.7 years (range, 16-65 years). The injury mechanism was traffic accident in 44 cases, hitting by heavy objects in 8 cases, and fall from height in 2 cases, involving 31 thighs, 19 legs and 4 feet involved. The sizes of the avulsed wounds ranged from 10 cm ×15 cm to 50 cm ×30 cm. There were 16 cases combined with hemorrhagic shock, 5 with femoral fractures, and 7 with tibiofibula fractures. Averagely the patients were sent to our hospital within 3.5 h (range, 1.5-10 h) after injury. For the 54 patients, three different surgical strategies were performed based on the wound area and condition of the avulsed skin: in Group A, 24 patients were treated by debridement and preservation of subcutaneous vascular network ⁺ vertical mattress suture of full thickness skin flap ⁺ tube drainage; in Group B, 25 patients were treated by split-thickness skin flap meshing and grafting ⁺ vacuum sealing drainage (VSD); and in Group C, the other 5 patients were treated by debridement and VSD at stage I ⁺ reattachment of autologous reserved frozen split-thickness skin graft at stage II. All the 54 patients recovered and were discharged eventually, without any deaths or amputees. In each group, there were no statistical differences (all p > 0.05) among different injury sites in terms of survival rate and length of hospital stay, except for the infection rate, which was much higher (p =0.000) at the leg area than that at the thigh (32.54% ± 2.97% vs. 2.32% ± 2.34% in Group A and 50.00% ± 0.00% vs. 0 in Group C) or the foot (50.00% ± 0.00% vs. 0 in Group C). Moreover comparison of the three surgical methods showed a significant different (all p < 0

  13. Synthesis and Applications of Large Area Graphene-Based Electrode Systems

    Science.gov (United States)

    Paul, Rajat Kanti

    Graphene is a single sheet of carbon atoms with outstanding electrical and physical properties and being exploited for applications in electronics, sensors, fuel cells, photovoltaics and energy storage. However, practical designs of graphene-based electrode systems and related experimental implementations are required to realize their widespread applications in nano- to bioelectronics. In this dissertation, different graphene-based electrode systems having metallic and semiconducting properties are synthesized optimizing process conditions. Also realized is the potential of the fabricated electrode systems by applying them in practical applications such as sensor devices and fuel cells. The zero bandgap of semimetal graphene still limits its application as an effective field-effect transistor device or a chemiresistor sensor operating at room temperature. It has been shown theoretically and experimentally that graphene nanoribbons (GNRs) or nanomeshes (GNMs) can attain a bandgap that is large enough for a transistor device, and hence would show high sensitivity to various gaseous species or biomolecules. Large-area mono- and bilayer graphene films are synthesized by a simple chemical vapor deposition (CVD) technique depending on the carbon precursors such as methane, acetylene and ethanol, and the results are compared using optical microscopy (OM), Raman spectroscopy, high-resolution transmission electron microscopy (HRTEM) and x-ray photoelectron spectroscopy (XPS). A simple reactive ion etching (RIE) combined with well-established nanosphere lithography is performed on the synthesized CVD-grown monolayer graphene platform to fabricate large area GNMs with specific dimension and periodicity. The fabricated GNMs chemiresistor sensor devices show excellent sensitivity towards NO2 and NH 3, significantly higher than their film counterparts. The GNM sensor devices exhibit sensitivities of about 4.32%/ppm (parts-per-million) in NO 2 and 0.71%/ppm in NH3 with estimated

  14. Printable organometallic perovskite enables large-area, low-dose X-ray imaging

    Science.gov (United States)

    Kim, Yong Churl; Kim, Kwang Hee; Son, Dae-Yong; Jeong, Dong-Nyuk; Seo, Ja-Young; Choi, Yeong Suk; Han, In Taek; Lee, Sang Yoon; Park, Nam-Gyu

    2017-10-01

    Medical X-ray imaging procedures require digital flat detectors operating at low doses to reduce radiation health risks. Solution-processed organic–inorganic hybrid perovskites have characteristics that make them good candidates for the photoconductive layer of such sensitive detectors. However, such detectors have not yet been built on thin-film transistor arrays because it has been difficult to prepare thick perovskite films (more than a few hundred micrometres) over large areas (a detector is typically 50 centimetres by 50 centimetres). We report here an all-solution-based (in contrast to conventional vacuum processing) synthetic route to producing printable polycrystalline perovskites with sharply faceted large grains having morphologies and optoelectronic properties comparable to those of single crystals. High sensitivities of up to 11 microcoulombs per air KERMA of milligray per square centimetre (μC mGyair‑1 cm‑2) are achieved under irradiation with a 100-kilovolt bremsstrahlung source, which are at least one order of magnitude higher than the sensitivities achieved with currently used amorphous selenium or thallium-doped cesium iodide detectors. We demonstrate X-ray imaging in a conventional thin-film transistor substrate by embedding an 830-micrometre-thick perovskite film and an additional two interlayers of polymer/perovskite composites to provide conformal interfaces between perovskite films and electrodes that control dark currents and temporal charge carrier transportation. Such an all-solution-based perovskite detector could enable low-dose X-ray imaging, and could also be used in photoconductive devices for radiation imaging, sensing and energy harvesting.

  15. A strategy for GIS-based 3-D slope stability modelling over large areas

    Science.gov (United States)

    Mergili, M.; Marchesini, I.; Alvioli, M.; Metz, M.; Schneider-Muntau, B.; Rossi, M.; Guzzetti, F.

    2014-12-01

    GIS-based deterministic models may be used for landslide susceptibility mapping over large areas. However, such efforts require specific strategies to (i) keep computing time at an acceptable level, and (ii) parameterize the geotechnical data. We test and optimize the performance of the GIS-based, 3-D slope stability model r.slope.stability in terms of computing time and model results. The model was developed as a C- and Python-based raster module of the open source software GRASS GIS and considers the 3-D geometry of the sliding surface. It calculates the factor of safety (FoS) and the probability of slope failure (Pf) for a number of randomly selected potential slip surfaces, ellipsoidal or truncated in shape. Model input consists of a digital elevation model (DEM), ranges of geotechnical parameter values derived from laboratory tests, and a range of possible soil depths estimated in the field. Probability density functions are exploited to assign Pf to each ellipsoid. The model calculates for each pixel multiple values of FoS and Pf corresponding to different sliding surfaces. The minimum value of FoS and the maximum value of Pf for each pixel give an estimate of the landslide susceptibility in the study area. Optionally, r.slope.stability is able to split the study area into a defined number of tiles, allowing parallel processing of the model on the given area. Focusing on shallow landslides, we show how multi-core processing makes it possible to reduce computing times by a factor larger than 20 in the study area. We further demonstrate how the number of random slip surfaces and the sampling of parameters influence the average value of Pf and the capacity of r.slope.stability to predict the observed patterns of shallow landslides in the 89.5 km2 Collazzone area in Umbria, central Italy.

  16. Large-Area, Low-Cost, High-Efficiency Neutron Detector for Vehicle-Mounted Operation

    Science.gov (United States)

    Lacy, Jeffrey L.; Martin, Christopher S.; Athanasiades, Athanasios; Regmi, Murari; Vazquez-Flores, Gerson J.; Davenport, Stephen; King, Nicholas S.; Lyons, Tom

    2017-07-01

    We have developed a large-area, low-cost, high-efficiency neutron detector for vehicle-mounted operation. The detector, which has overall dimensions 12.7 cm x 91.4 cm x 102 cm (5”x36”x40”), a sensitive area equal to 0.85 m2 (1320 in2), and weight of 110 kg (242 lbs), employs an array of 90 boron-coated straw (BCS) detectors. PTI has also developed electronics to minimize cost and space while providing low-noise signal conditioning for both neutron and gamma detection channels, as well as low energy Bluetooth communication with handheld devices. Extremely low power consumption allows continuous use for 225 hours (-.10 days) using three AAA lithium-ion rechargeable batteries. We present radiological, mechanical, and environmental tests, collected from four full-scale prototypes. Outdoor neutron-counting tests with a moderated 252Cf source 2 m away from the center of the detector face showed an average detection rate of 5.5 cps/ng with a standard deviation of 0.09 cps/ng over the four individual detector measurements. Measurements showed a gamma rejection ratio of 1.0 x 10-8, and gamma absolute rejection ratio (GARRn) of 0.93. The prototypes were also operated successfully onboard a moving vehicle for high-speed tests and a long-range 1433-mile, two-day road trip from Houston, TX, USA, to Laurel, MD, USA. Using auxiliary DARPA SIGMA equipment, the GPS, timestamp, gamma and neutron data were transmitted over the cellular network with 10 Hz resolution to a server and real-time tracking website. Mechanical impact and electrostatic discharge testing produced no spurious counts in either the neutron or gamma channels. Ambient environmental temperature testing showed less than ±1% response variation over the range from -30°C to +55°C.

  17. Probing Millisecond Pulsar Emission Geometry Using Light Curves From the Fermi Large Area Telescope

    Science.gov (United States)

    Venter, Christo; Harding, Alice; Guillemot, L.

    2009-01-01

    An interesting new high-energy pulsar sub-population is emerging following early discoveries of gamma-ray millisecond pulsars (MSPs) by the Fermi Large Area Telescope (LAT). We present results from 3D emission modeling, including the Special Relativistic effects of aberration and time-of-flight delays and also rotational sweepback of 13-field lines, in the geometric context of polar cap (PC), slot gap (SG), outer gap (OG), and two-pole caustic (TPC) pulsar models. In contrast to the general belief that these very old, rapidly-rotating neutron stars (NSs) should have largely pair-starved magnetospheres due to the absence of significant pair production, we find that most of the light curves are best fit by SG and OG models, which indicates the presence of narrow accelerating gaps limited by robust pair production -- even in these pulsars with very low spin-down luminosities. The gamma-ray pulse shapes and relative phase lags with respect to the radio pulses point to high-altitude emission being dominant for all geometries. We also find exclusive differentiation of the current gamma-ray MSP population into two MSP sub-classes: light curve shapes and lags across wavebands impose either pair-starved PC (PSPC) or SG / OG-type geometries. In the first case, the radio pulse has a small lag with respect to the single gamma-ray pulse, while the (first) gamma-ray peak usually trails the radio by a large phase offset in the latter case. Finally, we find that the flux correction factor as a function of magnetic inclination and observer angles is typically of order unity for all models. Our calculation of light curves and flux correction factor f(_, _, P) for the case of MSPs is therefore complementary to the "ATLAS paper" of Watters et al. for younger pulsars.

  18. Increased thickness uniformity of large-area nanofibrous layers by electrodynamic spinning

    Science.gov (United States)

    Pokorný, Marek; Klemeš, Jan; Kotzianová, Adéla; Kohoutek, Tomáš; Velebný, Vladimír

    2017-10-01

    This paper studies the causes of thickness inhomogeneities in continuously deposited large-area nanofibrous layers, introduces a new method of their rapid analysis and suggests technical measures to ensure greater thickness uniformity of produced nanofibrous layers. The thickness uniformity of nanofibrous layers over large surface areas and its testing have recently appeared as very important issues following the scale up of the production of nanofibrous layers from laboratory to industrial levels, i.e. from point-to-plate arrangement to roll-to-roll processing. The basic electrostatic spinning method produces layers with thickness distribution corresponding to the bivariate Gaussian distribution. However, increasing production and scaling-up processes often results in variations in the thickness of deposited nanofibrous layers even up to the order of tens of percent. But for most applications, inhomogeneities in the thickness are a critical and even limiting factor. Our results show that by using the method of electrodynamic spinning with moving electrodes, we were able to achieve 30% greater thickness uniformity within the observed area (100 x 26) cm2 than with the electrostatic method. Electrodynamic spinning can therefore be considered a very promising technology for the industrial production. We also demonstrated the digital image analysis as a new and efficient tool to optically determine the thickness uniformity of electrospun layers by analyzing the intensity of transmitted light through the layer on 26 x 22 cm2 sample area. This unique approach brings benefits of non-destructive, rapid and reproducible evaluation of the thickness uniformity of the nanofibrous layers over decimeter-square surface areas at the same time.

  19. The accuracy of large-area forest canopy cover estimation using Landsat in boreal region

    Science.gov (United States)

    Hadi; Korhonen, Lauri; Hovi, Aarne; Rönnholm, Petri; Rautiainen, Miina

    2016-12-01

    Large area prediction of continuous field of tree cover i.e., canopy cover (CC) using Earth observation data is of high interest in practical forestry, ecology, and climate change mitigation activities. We report the accuracy of using Landsat images for CC prediction in boreal forests validated with field reference plots (N = 250) covering large variation in latitude, forest structure, species composition, and site type. We tested two statistical models suitable for estimating CC: the beta regression (BetaReg) and random forest (RanFor). Landsat-based predictors utilized include individual bands, spectral vegetation indices (SVI), and Tasseled cap (Tass) features. Additionally, we tested an alternative model based on spectral mixture analysis (SMA). Finally, we carried out a first validation in boreal forests of the recently published Landsat Tree Cover Continuous (TCC) global product. Results showed simple BetaReg with red band reflectance provided the highest prediction accuracy (leave-site-out RMSECV 13.7%; R2CV 0.59; biasCV 0.5%). Spectral transformations into SVI and Tass did not improve accuracy. Including additional predictors did not significantly improve accuracy either. Nonlinear model RanFor did not outperform BetaReg. The alternative SMA model did not outperform the empirical models. However, empirical models cannot resolve the underestimation of high cover and overestimation of low cover. SMA prediction errors appeared less dependent on forest structure, while there seemed to be a potential for improvement by accounting for endmember variability of different tree species. Finally, using temporally concurrent observations, we showed the reasonably good accuracy of Landsat TCC product in boreal forests (RMSE 13.0%; R2 0.53; bias -2.1%), however with a tendency to underestimate high cover.

  20. REFINING THE ASSOCIATIONS OF THE FERMI LARGE AREA TELESCOPE SOURCE CATALOGS

    Energy Technology Data Exchange (ETDEWEB)

    Massaro, F. [Dipartimento di Fisica, Università degli Studi di Torino, via Pietro Giuria 1, I-10125 Torino (Italy); D’Abrusco, R.; Paggi, A.; Smith, Howard A. [Harvard-Smithsonian Astrophysical Observatory, Center for Astrophysics, 60 Garden Street, Cambridge, MA 02138 (United States); Landoni, M. [INAF-Osservatorio Astronomico di Brera, Via Emilio Bianchi 46, I-23807 Merate (Italy); Masetti, N. [INAF-Istituto di Astrofisica Spaziale e Fisica Cosmica di Bologna, via Gobetti 101, I-40129, Bologna (Italy); Giroletti, M. [INAF Istituto di Radioastronomia, via Gobetti 101, I-40129, Bologna (Italy); Otí-Floranes, H.; Jiménez-Bailón, E. [Instituto de Astronomía, Universidad Nacional Autónoma de México, Apdo. Postal 877, Ensenada, 22800 Baja California, México (Mexico); Chavushyan, V.; Patiño-Álvarez, V. [Instituto Nacional de Astrofísica, Óptica y Electrónica, Apartado Postal 51-216, 72000 Puebla, México (Mexico); Digel, S. W. [SLAC National Accelerator Laboratory and Kavli Institute for Particle Astrophysics and Cosmology, 2575 Sand Hill Road, Menlo Park, CA 94025 (United States); Tosti, G. [Dipartimento di Fisica, Università degli Studi di Perugia, I-06123 Perugia (Italy)

    2015-03-15

    The Fermi-Large Area Telescope (LAT) First Source Catalog (1FGL) was released in 2010 February and the Fermi-LAT 2-Year Source Catalog (2FGL) appeared in 2012 April, based on data from 24 months of operation. Since they were released, many follow up observations of unidentified γ-ray sources have been performed and new procedures for associating γ-ray sources with potential counterparts at other wavelengths have been developed. Here we review and characterize all of the associations as published in the 1FGL and 2FGL catalogs on the basis of multifrequency archival observations. In particular, we located 177 spectra for the low-energy counterparts that were not listed in the previous Fermi catalogs, and in addition we present new spectroscopic observations of eight γ-ray blazar candidates. Based on our investigations, we introduce a new counterpart category of “candidate associations” and propose a refined classification for the candidate low-energy counterparts of the Fermi sources. We compare the 1FGL-assigned counterparts with those listed in 2FGL to determine which unassociated sources became associated in later releases of the Fermi catalogs. We also search for potential counterparts to all of the remaining unassociated Fermi sources. Finally, we prepare a refined and merged list of all of the associations of 1FGL plus 2FGL that includes 2219 unique Fermi objects. This is the most comprehensive and systematic study of all the associations collected for the γ-ray sources available to date. We conclude that 80% of the Fermi sources have at least one known plausible γ-ray emitter within their positional uncertainty regions.

  1. Conceptual Design Gamma-Ray Large Area Space Telescope (GLAST) Tower Structure

    Energy Technology Data Exchange (ETDEWEB)

    Jennings, Chad

    2002-07-18

    The main objective of this work was to develop a conceptual design and engineering prototype for the Gamma-ray Large Area Space Telescope (GLAST) tower structure. This thesis describes the conceptual design of a GLAST tower and the fabrication and testing of a prototype tower tray. The requirements were that the structure had to support GLAST's delicate silicon strip detector array through ground handling, launch and in orbit operations as well as provide for thermal and electrical pathways. From the desired function and the given launch vehicle for the spacecraft that carries the GLAST detector, an efficient structure was designed which met the requirements. This thesis developed in three stages: design, fabrication, and testing. During the first stage, a general set of specifications was used to develop the initial design, which was then analyzed and shown to meet or exceed the requirements. The second stage called for the fabrication of prototypes to prove manufacturability and gauge cost and time estimates for the total project. The last step called for testing the prototypes to show that they performed as the analysis had shown and prove that the design met the requirements. As a spacecraft engineering exercise, this project required formulating a solution based on engineering judgment, analyzing the solution using advanced engineering techniques, then proving the validity of the design and analysis by the manufacturing and testing of prototypes. The design described here met all the requirements set out by the needs of the experiment and operating concerns. This strawman design is not intended to be the complete or final design for the GLAST instrument structure, but instead examines some of the main challenges involved and demonstrates that there are solutions to them. The purpose of these tests was to prove that there are solutions to the basic mechanical, electrical and thermal problems presented with the GLAST project.

  2. Observation and analysis of high-speed human motion with frequent occlusion in a large area

    Science.gov (United States)

    Wang, Yuru; Liu, Jiafeng; Liu, Guojun; Tang, Xianglong; Liu, Peng

    2009-12-01

    The use of computer vision technology in collecting and analyzing statistics during sports matches or training sessions is expected to provide valuable information for tactics improvement. However, the measurements published in the literature so far are either unreliably documented to be used in training planning due to their limitations or unsuitable for studying high-speed motion in large area with frequent occlusions. A sports annotation system is introduced in this paper for tracking high-speed non-rigid human motion over a large playing area with the aid of motion camera, taking short track speed skating competitions as an example. The proposed system is composed of two sub-systems: precise camera motion compensation and accurate motion acquisition. In the video registration step, a distinctive invariant point feature detector (probability density grads detector) and a global parallax based matching points filter are used, to provide reliable and robust matching across a large range of affine distortion and illumination change. In the motion acquisition step, a two regions' relationship constrained joint color model and Markov chain Monte Carlo based joint particle filter are emphasized, by dividing the human body into two relative key regions. Several field tests are performed to assess measurement errors, including comparison to popular algorithms. With the help of the system presented, the system obtains position data on a 30 m × 60 m large rink with root-mean-square error better than 0.3975 m, velocity and acceleration data with absolute error better than 1.2579 m s-1 and 0.1494 m s-2, respectively.

  3. A large area diamond-based beam tagging hodoscope for ion therapy monitoring

    Science.gov (United States)

    Gallin-Martel, M.-L.; Abbassi, L.; Bes, A.; Bosson, G.; Collot, J.; Crozes, T.; Curtoni, S.; Dauvergne, D.; De Nolf, W.; Fontana, M.; Gallin-Martel, L.; Hostachy, J.-Y.; Krimmer, J.; Lacoste, A.; Marcatili, S.; Morse, J.; Motte, J.-F.; Muraz, J.-F.; Rarbi, F. E.; Rossetto, O.; Salomé, M.; Testa, É.; Vuiart, R.; Yamouni, M.

    2018-01-01

    The MoniDiam project is part of the French national collaboration CLaRyS (Contrôle en Ligne de l'hAdronthérapie par RaYonnements Secondaires) for on-line monitoring of hadron therapy. It relies on the imaging of nuclear reaction products that is related to the ion range. The goal here is to provide large area beam detectors with a high detection efficiency for carbon or proton beams giving time and position measurement at 100 MHz count rates (beam tagging hodoscope). High radiation hardness and intrinsic electronic properties make diamonds reliable and very fast detectors with a good signal to noise ratio. Commercial Chemical Vapor Deposited (CVD) poly-crystalline, heteroepitaxial and monocrystalline diamonds were studied. Their applicability as a particle detector was investigated using α and β radioactive sources, 95 MeV/u carbon ion beams at GANIL and 8.5 keV X-ray photon bunches from ESRF. This facility offers the unique capability of providing a focused ( 1 μm) beam in bunches of 100 ps duration, with an almost uniform energy deposition in the irradiated detector volume, therefore mimicking the interaction of single ions. A signal rise time resolution ranging from 20 to 90 ps rms and an energy resolution of 7 to 9% were measured using diamonds with aluminum disk shaped surface metallization. This enabled us to conclude that polycrystalline CVD diamond detectors are good candidates for our beam tagging hodoscope development. Recently, double-side stripped metallized diamonds were tested using the XBIC (X Rays Beam Induced Current) set-up of the ID21 beamline at ESRF which permits us to evaluate the capability of diamond to be used as position sensitive detector. The final detector will consist in a mosaic arrangement of double-side stripped diamond sensors read out by a dedicated fast-integrated electronics of several hundreds of channels.

  4. Exploring diversity in ensemble classification: Applications in large area land cover mapping

    Science.gov (United States)

    Mellor, Andrew; Boukir, Samia

    2017-07-01

    Ensemble classifiers, such as random forests, are now commonly applied in the field of remote sensing, and have been shown to perform better than single classifier systems, resulting in reduced generalisation error. Diversity across the members of ensemble classifiers is known to have a strong influence on classification performance - whereby classifier errors are uncorrelated and more uniformly distributed across ensemble members. The relationship between ensemble diversity and classification performance has not yet been fully explored in the fields of information science and machine learning and has never been examined in the field of remote sensing. This study is a novel exploration of ensemble diversity and its link to classification performance, applied to a multi-class canopy cover classification problem using random forests and multisource remote sensing and ancillary GIS data, across seven million hectares of diverse dry-sclerophyll dominated public forests in Victoria Australia. A particular emphasis is placed on analysing the relationship between ensemble diversity and ensemble margin - two key concepts in ensemble learning. The main novelty of our work is on boosting diversity by emphasizing the contribution of lower margin instances used in the learning process. Exploring the influence of tree pruning on diversity is also a new empirical analysis that contributes to a better understanding of ensemble performance. Results reveal insights into the trade-off between ensemble classification accuracy and diversity, and through the ensemble margin, demonstrate how inducing diversity by targeting lower margin training samples is a means of achieving better classifier performance for more difficult or rarer classes and reducing information redundancy in classification problems. Our findings inform strategies for collecting training data and designing and parameterising ensemble classifiers, such as random forests. This is particularly important in large area

  5. CRADA/NFE-15-05779 Report: Fabrication of Large Area Printable Composite Magnets

    Energy Technology Data Exchange (ETDEWEB)

    Paranthaman, M Parans [ORNL

    2016-09-29

    The technical objective of this technical collaboration phase I proposal was to fabricate large area NdFeB composite magnets at the Oak Ridge National Laboratory Manufacturing Demonstration Facility (ORNL MDF). The goal was to distribute domestically produced isotropic and highly anisotropic high energy density magnetic particles throughout the composite structure in order to enable site specific placement of magnetic phases and minimize the generated waste associated with permanent magnet manufacturing. Big area additive manufacturing (BAAM) and magnet composite fabrication methods were used in this study. BAAM was used to fabricate 65 vol % isotropic MQP NdFeB magnets in nylon polymer matrix. BAAM magnet cylinder was sliced to two magnetic arc-shaped braces. The density of the small BAAM magnet pieces reached 4.1 g/cm3, and the room temperature magnetic properties are: Intrinsic coercivity Hci = 8.8 kOe, Remanence Br = 4.2 kG, and energy product (BH)max = 3.7 MGOe. Also, 1.5” x 1.5” composite magnets with anisotropic MQA NdFeB magnet in a resin were also fabricated under magnetic field. The unaligned sample had a density of 3.75 g/cm3. However, aligned sample possessed a density of 4.27 g/cm3. The magnetic properties didn’t degrade during this process. This study provides a pathway for preparing composite magnets for various magnetic applications.

  6. Constraints on Lorentz Invariance Violation from Fermi -Large Area Telescope Observations of Gamma-Ray Bursts

    Science.gov (United States)

    Vasileiou, V.; Jacholkowska, A.; Piron, F.; Bolmont, J.; Courturier, C.; Granot, J.; Stecker, Floyd William; Cohen-Tanugi, J.; Longo, F.

    2013-01-01

    We analyze the MeV/GeV emission from four bright Gamma-Ray Bursts (GRBs) observed by the Fermi-Large Area Telescope to produce robust, stringent constraints on a dependence of the speed of light in vacuo on the photon energy (vacuum dispersion), a form of Lorentz invariance violation (LIV) allowed by some Quantum Gravity (QG) theories. First, we use three different and complementary techniques to constrain the total degree of dispersion observed in the data. Additionally, using a maximally conservative set of assumptions on possible source-intrinsic spectral-evolution effects, we constrain any vacuum dispersion solely attributed to LIV. We then derive limits on the "QG energy scale" (the energy scale that LIV-inducing QG effects become important, E(sub QG)) and the coefficients of the Standard Model Extension. For the subluminal case (where high energy photons propagate more slowly than lower energy photons) and without taking into account any source-intrinsic dispersion, our most stringent limits (at 95% CL) are obtained from GRB 090510 and are E(sub QG,1) > 7.6 times the Planck energy (E(sub Pl)) and E(sub QG,2) > 1.3×10(exp 11) GeV for linear and quadratic leading order LIV-induced vacuum dispersion, respectively. These limits improve the latest constraints by Fermi and H.E.S.S. by a factor of approx. 2. Our results disfavor any class of models requiring E(sub QG,1) < or approx. E(sub Pl)

  7. CARMA LARGE AREA STAR FORMATION SURVEY: STRUCTURE AND KINEMATICS OF DENSE GAS IN SERPENS MAIN

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Katherine I.; Storm, Shaye; Mundy, Lee G.; Teuben, Peter; Pound, Marc W.; Salter, Demerese M.; Chen, Che-Yu [Department of Astronomy, University of Maryland, College Park, MD 20742 (United States); Fernández-López, Manuel; Looney, Leslie W.; Segura-Cox, Dominique [Department of Astronomy, University of Illinois, Urbana-Champaign, IL 61801 (United States); Rosolowsky, Erik [Departments of Physics and Statistics, University of British Columbia, Okanagan Campus, 3333 University Way, Kelowna BC V1V 1V7 (Canada); Arce, Héctor G.; Plunkett, Adele L. [Department of Astronomy, Yale University, PO Box 208101, New Haven, CT 06520-8101 (United States); Ostriker, Eve C. [Department of Astrophysical Sciences, Princeton University, Princeton, NJ 08544 (United States); Shirley, Yancy L. [Steward Observatory, 933 North Cherry Avenue, Tucson, AZ 85721 (United States); Kwon, Woojin [SRON Netherlands Institute for Space Research, Landleven 12, 9747 AD Groningen (Netherlands); Kauffmann, Jens [Max Planck Institut für Radioastronomie, Auf dem Hügel 69 D-53121, Bonn Germany (Germany); Tobin, John J. [National Radio Astronomy Observatory, Charlottesville, VA 22903 (United States); Volgenau, N. H. [Astronomy Department, California Institute of Technology, 1200 East California Boulevard, Pasadena, CA 91125 (United States); Tassis, Konstantinos, E-mail: ijlee9@astro.umd.edu [Department of Physics and Institute of Theoretical and Computational Physics, University of Crete, PO Box 2208, GR-710 03, Heraklion, Crete (Greece); and others

    2014-12-20

    We present observations of N{sub 2}H{sup +} (J = 1 → 0), HCO{sup +} (J = 1 → 0), and HCN (J = 1 → 0) toward the Serpens Main molecular cloud from the CARMA Large Area Star Formation Survey (CLASSy). We mapped 150 arcmin{sup 2} of Serpens Main with an angular resolution of ∼7''. The gas emission is concentrated in two subclusters (the NW and SE subclusters). The SE subcluster has more prominent filamentary structures and more complicated kinematics compared to the NW subcluster. The majority of gas in the two subclusters has subsonic to sonic velocity dispersions. We applied a dendrogram technique with N{sub 2}H{sup +}(1-0) to study the gas structures; the SE subcluster has a higher degree of hierarchy than the NW subcluster. Combining the dendrogram and line fitting analyses reveals two distinct relations: a flat relation between nonthermal velocity dispersion and size, and a positive correlation between variation in velocity centroids and size. The two relations imply a characteristic depth of 0.15 pc for the cloud. Furthermore, we have identified six filaments in the SE subcluster. These filaments have lengths of ∼0.2 pc and widths of ∼0.03 pc, which is smaller than a characteristic width of 0.1 pc suggested by Herschel observations. The filaments can be classified into two types based on their properties. The first type, located in the northeast of the SE subcluster, has larger velocity gradients, smaller masses, and nearly critical mass-per-unit-length ratios. The other type, located in the southwest of the SE subcluster, has the opposite properties. Several YSOs are formed along two filaments which have supercritical mass per unit length ratios, while filaments with nearly critical mass-per-unit-length ratios are not associated with YSOs, suggesting that stars are formed on gravitationally unstable filaments.

  8. Gamma-ray observations of the Orion Molecular Clouds with the Fermi Large Area Telescope

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, M.; Ajello, M.; Allafort, A.; Antolini, E.; Baldini, L.; Ballet, J.; Barbiellini, G.; Bastieri, D.; Bechtol, K.; Bellazzini, R.; Berenji, B.; Blandford, R. D.; Bloom, E. D.; Bonamente, E.; Borgland, A. W.; Bottacini, E.; Brandt, T. J.; Bregeon, J.; Brigida, M.; Bruel, P.; Buehler, R.; Buson, S.; Caliandro, G. A.; Cameron, R. A.; Caraveo, P. A.; Cecchi, C.; Chekhtman, A.; Chiang, J.; Ciprini, S.; Claus, R.; Cohen-Tanugi, J.; Conrad, J.; D' Ammando, F.; de Angelis, A.; de Palma, F.; Dermer, C. D.; do Couto e Silva, E.; Drell, P. S.; Drlica-Wagner, A.; Enoto, T.; Falletti, L.; Favuzzi, C.; Fegan, S. J.; Ferrara, E. C.; Focke, W. B.; Fukazawa, Y.; Fukui, Y.; Fusco, P.; Gargano, F.; Gasparrini, D.; Germani, S.; Giglietto, N.; Giordano, F.; Giroletti, M.; Glanzman, T.; Godfrey, G.; Guiriec, S.; Hadasch, D.; Hanabata, Y.; Harding, A. K.; Hayashida, M.; Hayashi, K.; Horan, D.; Hou, X.; Hughes, R. E.; Jackson, M. S.; Jóhannesson, G.; Johnson, A. S.; Kamae, T.; Katagiri, H.; Kataoka, J.; Kerr, M.; Knödlseder, J.; Kuss, M.; Lande, J.; Larsson, S.; Lee, S. -H.; Longo, F.; Loparco, F.; Lovellette, M. N.; Lubrano, P.; Makishima, K.; Mazziotta, M. N.; Mehault, J.; Mitthumsiri, W.; Moiseev, A. A.; Monte, C.; Monzani, M. E.; Morselli, A.; Moskalenko, I. V.; Murgia, S.; Nakamori, T.; Naumann-Godo, M.; Nishino, S.; Norris, J. P.; Nuss, E.; Ohno, M.; Ohsugi, T.; Okumura, A.; Orienti, M.; Orlando, E.; Ormes, J. F.; Ozaki, M.; Paneque, D.; Panetta, J. H.; Parent, D.; Pelassa, V.; Pesce-Rollins, M.; Pierbattista, M.; Piron, F.; Pivato, G.; Porter, T. A.; Rainò, S.; Razzano, M.; Reimer, A.; Reimer, O.; Roth, M.; Sadrozinski, H. F. -W.; Sgrò, C.; Siskind, E. J.; Spandre, G.; Spinelli, P.; Strong, A. W.; Takahashi, H.; Takahashi, T.; Tanaka, T.; Thayer, J. G.; Thayer, J. B.; Tibolla, O.; Tinivella, M.; Torres, D. F.; Tramacere, A.; Troja, E.; Uchiyama, Y.; Usher, T. L.; Vandenbroucke, J.; Vasileiou, V.; Vianello, G.; Vitale, V.; Waite, A. P.; Wang, P.; Winer, B. L.; Wood, K. S.; Yang, Z.; Zimmer, S.

    2012-08-08

    We report on the gamma-ray observations of giant molecular clouds Orion A and B with the Large Area Telescope (LAT) on board the Fermi Gamma-ray Space Telescope. The gamma-ray emission in the energy band between ~100 MeV and ~100 GeV is predicted to trace the gas mass distribution in the clouds through nuclear interactions between the Galactic cosmic rays (CRs) and interstellar gas. The gamma-ray production cross-section for the nuclear interaction is known to ~10% precision which makes the LAT a powerful tool to measure the gas mass column density distribution of molecular clouds for a known CR intensity. We present here such distributions for Orion A and B, and correlate them with those of the velocity-integrated CO intensity (W CO) at a 1° × 1° pixel level. The correlation is found to be linear over a W CO range of ~10-fold when divided in three regions, suggesting penetration of nuclear CRs to most of the cloud volumes. The W CO-to-mass conversion factor, X CO, is found to be ~2.3 × 1020 cm-2(K km s–1)–1 for the high-longitude part of Orion A (l > 212°), ~1.7 times higher than ~1.3 × 1020 found for the rest of Orion A and B. We interpret the apparent high X CO in the high-longitude region of Orion A in the light of recent works proposing a nonlinear relation between H2 and CO densities in the diffuse molecular gas. W CO decreases faster than the H2 column density in the region making the gas "darker" to W CO.

  9. Large area, label-free imaging of extracellular matrix using telecentricity

    Science.gov (United States)

    Visbal Onufrak, Michelle A.; Konger, Raymond L.; Kim, Young L.

    2017-02-01

    Subtle alterations in stromal tissue structures and organizations within the extracellular matrix (ECM) have been observed in several types of tissue abnormalities, including early skin cancer and wounds. Current microscopic imaging methods often lack the ability to accurately determine the extent of malignancy over a large area, due to their limited field of view. In this research we focus on the development of simple mesoscopic (i.e. between microscopic and macroscopic) biomedical imaging device for non-invasive assessment of ECM alterations over a large, heterogeneous area. In our technology development, a telecentric lens, commonly used in machine vision systems but rarely used in biomedical imaging, serves as a key platform to visualize alterations in tissue microenvironments in a label-free manner over a clinically relevant area. In general, telecentric imaging represents a simple, alternative method for reducing unwanted scattering or diffuse light caused by the highly anisotropic scattering properties of biological tissue. In particular, under telecentric imaging the light intensity backscattered from biological tissue is mainly sensitive to the scattering anisotropy factor, possibly associated with the ECM. We demonstrate the inherent advantages of combining telecentric lens systems with hyperspectral imaging for providing optical information of tissue scattering in biological tissue of murine models, as well as light absorption of hemoglobin in blood vessel tissue phantoms. Thus, we envision that telecentric imaging could potentially serve for simple site-specific, tissue-based assessment of stromal alterations over a clinically relevant field of view in a label-free manner, for studying diseases associated with disruption of homeostasis in ECM.

  10. Fabricating Large-Area Sheets of Single-Layer Graphene by CVD

    Science.gov (United States)

    Bronikowski, Michael; Manohara, Harish

    2008-01-01

    This innovation consists of a set of methodologies for preparing large area (greater than 1 cm(exp 2)) domains of single-atomic-layer graphite, also called graphene, in single (two-dimensional) crystal form. To fabricate a single graphene layer using chemical vapor deposition (CVD), the process begins with an atomically flat surface of an appropriate substrate and an appropriate precursor molecule containing carbon atoms attached to substituent atoms or groups. These molecules will be brought into contact with the substrate surface by being flowed over, or sprayed onto, the substrate, under CVD conditions of low pressure and elevated temperature. Upon contact with the surface, the precursor molecules will decompose. The substituent groups detach from the carbon atoms and form gas-phase species, leaving the unfunctionalized carbon atoms attached to the substrate surface. These carbon atoms will diffuse upon this surface and encounter and bond to other carbon atoms. If conditions are chosen carefully, the surface carbon atoms will arrange to form the lowest energy single-layer structure available, which is the graphene lattice that is sought. Another method for creating the graphene lattice includes metal-catalyzed CVD, in which the decomposition of the precursor molecules is initiated by the catalytic action of a catalytic metal upon the substrate surface. Another type of metal-catalyzed CVD has the entire substrate composed of catalytic metal, or other material, either as a bulk crystal or as a think layer of catalyst deposited upon another surface. In this case, the precursor molecules decompose directly upon contact with the substrate, releasing their atoms and forming the graphene sheet. Atomic layer deposition (ALD) can also be used. In this method, a substrate surface at low temperature is covered with exactly one monolayer of precursor molecules (which may be of more than one type). This is heated up so that the precursor molecules decompose and form one

  11. Pilot production and advanced development of large-area picosecond photodetectors

    Science.gov (United States)

    Minot, Michael J.; Adams, Bernhard W.; Aviles, Melvin; Bond, Justin L.; Craven, Christopher A.; Cremer, Till; Foley, Michael R.; Lyashenko, Alexey; Popecki, Mark A.; Stochaj, Michael E.; Worstell, William A.; Mane, Anil U.; Elam, Jeffrey W.; Siegmund, Oswald H. W.; Ertley, Camden; Frisch, Henry; Elagin, Andrey

    2016-09-01

    We report pilot production and advanced development performance results achieved for Large Area Picosecond Photodetectors (LAPPD). The LAPPD is a microchannel plate (MCP) based photodetector, capable of imaging with single-photon sensitivity at high spatial and temporal resolutions in a hermetic package with an active area of 400 square centimeters. In December 2015, Incom Inc. completed installation of equipment and facilities for demonstration of early stage pilot production of LAPPD. Initial fabrication trials commenced in January 2016. The "baseline" LAPPD employs an all-glass hermetic package with top and bottom plates and sidewalls made of borosilicate float glass. Signals are generated by a bi-alkali Na2KSb photocathode and amplified with a stacked chevron pair of "next generation" MCPs produced by applying resistive and emissive atomic layer deposition coatings to borosilicate glass capillary array (GCA) substrates. Signals are collected on RF strip-line anodes applied to the bottom plates which exit the detector via pinfree hermetic seals under the side walls. Prior tests show that LAPPDs have electron gains greater than 107, submillimeter space resolution for large pulses and several mm for single photons, time resolutions of 50 picoseconds for single photons, predicted resolution of less than 5 picoseconds for large pulses, high stability versus charge extraction, and good uniformity. LAPPD performance results for product produced during the first half of 2016 will be reviewed. Recent advances in the development of LAPPD will also be reviewed, as the baseline design is adapted to meet the requirements for a wide range of emerging application. These include a novel ceramic package design, ALD coated MCPs optimized to have a low temperature coefficient of resistance (TCR) and further advances to adapt the LAPPD for cryogenic applications using Liquid Argon (LAr). These developments will meet the needs for DOE-supported RD for the Deep Underground Neutrino

  12. The Effect of ISO 9001 and the EFQM Model on Improving Hospital Performance: A Systematic Review.

    Science.gov (United States)

    Yousefinezhadi, Taraneh; Mohamadi, Efat; Safari Palangi, Hossein; Akbari Sari, Ali

    2015-12-01

    This study aimed to explore the effect of the International Organization for Standardization (ISO) ISO 9001 standard and the European foundation for quality management (EFQM) model on improving hospital performance. PubMed, Embase and the Cochrane Library databases were searched. In addition, Elsevier and Springer were searched as main publishers in the field of health sciences. We included empirical studies with any design that had used ISO 9001 or the EFQM model to improve the quality of healthcare. Data were collected and tabulated into a data extraction sheet that was specifically designed for this study. The collected data included authors' names, country, year of publication, intervention, improvement aims, setting, length of program, study design, and outcomes. Seven out of the 121 studies that were retrieved met the inclusion criteria. Three studies assessed the EFQM model and four studies assessed the ISO 9001 standard. Use of the EFQM model increased the degree of patient satisfaction and the number of hospital admissions and reduced the average length of stay, the delay on the surgical waiting list, and the number of emergency re-admissions. ISO 9001 also increased the degree of patient satisfaction and patient safety, increased cost-effectiveness, improved the hospital admissions process, and reduced the percentage of unscheduled returns to the hospital. Generally, there is a lack of robust and high quality empirical evidence regarding the effects of ISO 9001 and the EFQM model on the quality care provided by and the performance of hospitals. However, the limited evidence shows that ISO 9001 and the EFQM model might improve hospital performance.

  13. 75 FR 7581 - RTO/ISO Performance Metrics; Notice Requesting Comments on RTO/ISO Performance Metrics

    Science.gov (United States)

    2010-02-22

    ... Energy Regulatory Commission RTO/ISO Performance Metrics; Notice Requesting Comments on RTO/ ISO..., work with regional transmission organizations (RTO), Independent System Operators (ISO), stakeholders and other experts to develop standardized measures that track the performance of RTO/ISO operations...

  14. Promoting Strong ISO 50001 Outcomes with Supportive National Infrastructure:

    OpenAIRE

    McKane, Aimee, T.; Siciliano, Graziella; de los Reyes, Pamela

    2015-01-01

    The ISO 50001 standard is a key mechanism for reducing greenhouse gas emissions and improving energy efficiency globally. An increasing number of companies are seeking certification, creating the need for personnel that are competent to conduct ISO 50001 certification audits. The growth of ISO 50001 is expected to accelerate as more companies integrate ISO 50001 into their corporate sustainability strategies and supplier requirements. Robust implementation of ISO 50001 represents an impo...

  15. Studi Teoritis Iso 9000 Dan Tqm: Substitusi Atau Komplemeter?

    OpenAIRE

    Respati, Harianto

    2007-01-01

    Banyak pertentangan pendapat tentang dampak ISO 9000 dan TQM dalam kaitannya dengan tujuannya yakni kepuasan pelanggan. Selain itu peran ISO 9000 dan TQM dipandang masih membingungkan. Penjelasan pada jurnal ini, diuraikan secara konseptual baik dari pernyataan para pakar maupun hasil-hasil penelitian terdahulu tentang peran ISO 9000 dan TQM. Hasil menujukkan bahwa secara umum ISO 9000 dan TQM mempunyai tujuan yang sama yakni kepuasan pelanggan. Peran implementasi sertifikasi ISO 9000 dan pra...

  16. ISO 9000 and Creativity: Potential Advantages of Implementing ISO in Community Colleges

    Science.gov (United States)

    Alkeaid, Adel

    2007-01-01

    The purpose of this paper is to examine the relationship between the ISO 9000 standard and creativity. In this paper, the researcher tries to answer the following questions: Which learning theories best foster creative thought? Is creativity more behaviorist or constructivist? Where does ISO 9000 fit in the continuum from behaviorism to…

  17. Increased levels of the oxidative stress biomarker 8-iso-prostaglandin F2α in wastewater associated with tobacco use

    DEFF Research Database (Denmark)

    Ryu, Yeonsuk; Gracia-Lor, Emma; Bade, Richard

    2016-01-01

    oxidative stress at a community level. In this work, 8-iso-prostaglandin F2α (8-iso-PGF2α) was analysed in raw 24 h-composite wastewater samples collected from 4 Norwegian and 7 other European cities in 2014 and 2015. Using the same samples, biomarkers of alcohol (ethyl sulfate) and tobacco (trans-3...... inhabitants. There were no temporal trends observed in the levels of 8-iso-PGF2α, however, spatial differences were found at the inter-city level correlating to the degree of urbanisation. The 8-iso-PGF2α mass load was found to be strongly associated with that of trans-3'-hydroxycotinine while it showed...

  18. The Large Area Telescope on the Fermi Gamma-ray Space Telescope Mission

    Energy Technology Data Exchange (ETDEWEB)

    Atwood, W.B.; /UC, Santa Cruz; Abdo, Aous A.; /Naval Research Lab, Wash., D.C.; Ackermann, M.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Anderson, B. /UC, Santa Cruz; Axelsson, M.; /Stockholm U.; Baldini, L.; /INFN, Pisa; Ballet, J.; /DAPNIA, Saclay; Band, D.L.; /NASA, Goddard /NASA, Goddard; Barbiellini, Guido; /INFN, Trieste /Trieste U.; Bartelt, J.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bastieri, Denis; /INFN, Padua /Padua U.; Baughman, B.M.; /Ohio State U.; Bechtol, K.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bederede, D.; /DAPNIA, Saclay; Bellardi, F.; /INFN, Pisa; Bellazzini, R.; /INFN, Pisa; Berenji, B.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bignami, G.F.; /Pavia U.; Bisello, D.; /INFN, Padua /Padua U.; Bissaldi, E.; /Garching, Max Planck Inst., MPE; Blandford, R.D.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /INFN, Perugia /Perugia U. /NASA, Goddard /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /INFN, Pisa /INFN, Pisa /Bari U. /INFN, Bari /Ecole Polytechnique /Washington U., Seattle /INFN, Padua /Padua U. /Bari U. /INFN, Bari /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /IASF, Milan /IASF, Milan /Kalmar U. /Royal Inst. Tech., Stockholm /DAPNIA, Saclay /ASI, Rome /INFN, Pisa /INFN, Perugia /Perugia U. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /George Mason U. /Naval Research Lab, Wash., D.C. /NASA, Goddard /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /DAPNIA, Saclay /NASA, Goddard /INFN, Perugia /Perugia U. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Montpellier U. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; /more authors..

    2009-05-15

    The Large Area Telescope (Fermi/LAT, hereafter LAT), the primary instrument on the Fermi Gamma-ray Space Telescope (Fermi) mission, is an imaging, wide field-of-view (FoV), high-energy {gamma}-ray telescope, covering the energy range from below 20 MeV to more than 300 GeV. The LAT was built by an international collaboration with contributions from space agencies, high-energy particle physics institutes, and universities in France, Italy, Japan, Sweden, and the United States. This paper describes the LAT, its preflight expected performance, and summarizes the key science objectives that will be addressed. On-orbit performance will be presented in detail in a subsequent paper. The LAT is a pair-conversion telescope with a precision tracker and calorimeter, each consisting of a 4 x 4 array of 16 modules, a segmented anticoincidence detector that covers the tracker array, and a programmable trigger and data acquisition system. Each tracker module has a vertical stack of 18 (x, y) tracking planes, including two layers (x and y) of single-sided silicon strip detectors and high-Z converter material (tungsten) per tray. Every calorimeter module has 96 CsI(Tl) crystals, arranged in an eight-layer hodoscopic configuration with a total depth of 8.6 radiation lengths, giving both longitudinal and transverse information about the energy deposition pattern. The calorimeter's depth and segmentation enable the high-energy reach of the LAT and contribute significantly to background rejection. The aspect ratio of the tracker (height/width) is 0.4, allowing a large FoV (2.4 sr) and ensuring that most pair-conversion showers initiated in the tracker will pass into the calorimeter for energy measurement. Data obtained with the LAT are intended to (1) permit rapid notification of high-energy {gamma}-ray bursts and transients and facilitate monitoring of variable sources, (2) yield an extensive catalog of several thousand high-energy sources obtained from an all-sky survey, (3

  19. [An epidemiological investigation of pediatric patients under 14 with large area burns: a multicenter study].

    Science.gov (United States)

    Cheng, W F; Zhao, D X; Shen, Z A; Zhang, H Y; Tu, J J; Yuan, Z Q; Duan, P; Song, G D

    2017-02-14

    Objective: To investigate and evaluate the epidemiological characteristics of patients under 14 with large area burns in China. Methods: Data of pediatric patients aged 0-14yr with ≥30% total body surface area (TBSA) burned admitted into 106 burn centers in the mainland of China in 2014 were retrieved. The children were divided into three age groups: 0-3, 4-6 and 7-14 years according to the age. Information of age, gender, time of burn injury, causes of burns, admission time, prehospital emergency care of burn wound, burn area, inhalation injuries, the case fatality rate and length of hospital stay were collected for analysis. Results: Of the 486 cases included, 285 (58.6%) were boys and 201 (41.4%) were girls. The mean age of the children was (3.4±2.8) years. Children under 3 years old accounted for 67.5% of all the cases. 271 of the burn injuries (55.8%) occurred from April through August. Scalds and flames were the main causes of burns, which were the causes of 394 cases (81.1%) and 71 cases (14.6%), respectively. The burn injuries resulted from scalds and flames accounted for 89.6% and 7.3%, 70.8% and 21.9%, 51.6% and 41.9% in the age group of 0-3, 4-6 and 7-14 years respectively. The distribution of burn etiology in different age groups differed significantly (χ(2)=21.239, 59.442, 7.333, all Parea of 236 patients (48.6%) were treated improperly with toothpaste, soy sauce, eggs or other non-standard disposal. The mean TBSA area of the patients was (42.1±14.5)%, while 288 (59.3%) of the patients suffered full thickness burns with mean TBSA of (24.5±17.9)%. The case fatality rate (CFR) was 4.1%, and the CFR of patients complicated with inhalation injury was significantly higher than those without (P<0.01). The average length of stay for pediatric burn patients was (52.3±40.2) days. Conclusions: Children under 3 years old are important target population of severe burns. Scald is the most common type of burns, while the proportion of flames increases as age

  20. Laser Direct Write micro-fabrication of large area electronics on flexible substrates

    Energy Technology Data Exchange (ETDEWEB)

    Zacharatos, F.; Makrygianni, M. [National Technical University of Athens, Physics Department, Zografou Campus, 15780 (Greece); Geremia, R.; Biver, E.; Karnakis, D. [Oxford Lasers Ltd, Unit 8 Moorbrook Park, Oxfordshire OX11 7HP (United Kingdom); Leyder, S.; Puerto, D.; Delaporte, P. [Aix-Marseille University, CNRS, LP3 – UMR 7341, 13288 Marseille Cedex 9 (France); Zergioti, I., E-mail: zergioti@central.ntua.gr [National Technical University of Athens, Physics Department, Zografou Campus, 15780 (Greece)

    2016-06-30

    Highlights: • Laser Direct Writing of metallic patterns with a minimum feature size of 1 μm. • Selective Laser Ablation of 50 nm thick metal films on flexible substrates. • Selective Laser sintering resulting in an electrical resistivity of 9 μΩ cm. • Laser fabrication of interdigitated electrodes for sensor applications. - Abstract: To date, Laser Direct Write (LDW) techniques, such as Laser Induced Forward Transfer (LIFT), selective laser ablation and selective laser sintering of metal nanoparticle (NP) ink layers are receiving growing attention for the printing of uniform and well-defined conductive patterns with resolution down to 10 μm. For flexible substrates in particular, selective laser sintering of such NP patterns has been widely applied, as a low temperature and high resolution process compatible with large area electronics. In this work, LDW of silver NP inks has been carried out on polyethylene-terephthalate (PET), polyethylene-naphthalate (PEN) and polyimide (PI) substrates to achieve low electrical resistivity electrodes. In more detail, high speed short pulsed (picosecond and nanosecond) lasers with repetition rates up to 1 MHz were used to print (LIFT) metal NP inks. We thus achieved uniform and continuous patterns with a minimum feature size of 1 μm and a total footprint larger than 1 cm{sup 2}. Next, the printed patterns were laser sintered with ns pulses at 532 nm over a wide laser fluence window, resulting in an electrical resistivity of 10 μΩ cm. We carried out spatial beam shaping experiments to achieve a top-hat laser intensity profile and employed selective laser ablation of thin films (thickness on the order of 100 nm) to produce silver micro-electrodes with a resolution on the order of 10 μm and a low line edge roughness. Laser sintering was combined with laser ablation to constitute a fully autonomous micro-patterning technique of metallic micro-features, with a 10 μm resolution and geometrical characteristics tuned for

  1. Fermi Large Area Telescope Observations of Markarian 421: The Missing Piece of its Spectral Energy Distribution

    Science.gov (United States)

    Abdo, A. A.; Ackermann, M.; Ajello, M.; Baldini, L.; Ballet, J.; Barbiellini, G.; Bastieri, D.; Bechtol, K.; Bellazzini, R.; Berenji, B.; Blandford, R. D.; Bloom, E. D.; Bonamente, E.; Borgland, A. W.; Bouvier, A.; Bregeon, J.; Brez, A.; Brigida, M.; Bruel, P.; Buehler, R.; Buson, S.; Caliandro, G. A.; Cameron, R. A.; Cannon, A.; Caraveo, P. A.; Carrigan, S.; Casandjian, J. M.; Cavazzuti, E.; Cecchi, C.; Çelik, Ö.; Charles, E.; Chekhtman, A.; Chiang, J.; Ciprini, S.; Claus, R.; Cohen-Tanugi, J.; Conrad, J.; Cutini, S.; de Angelis, A.; de Palma, F.; Dermer, C. D.; Silva, E. do Couto e.; Drell, P. S.; Dubois, R.; Dumora, D.; Escande, L.; Favuzzi, C.; Fegan, S. J.; Finke, J.; Focke, W. B.; Fortin, P.; Frailis, M.; Fuhrmann, L.; Fukazawa, Y.; Fukuyama, T.; Funk, S.; Fusco, P.; Gargano, F.; Gasparrini, D.; Gehrels, N.; Georganopoulos, M.; Germani, S.; Giebels, B.; Giglietto, N.; Giommi, P.; Giordano, F.; Giroletti, M.; Glanzman, T.; Godfrey, G.; Grenier, I. A.; Guiriec, S.; Hadasch, D.; Hayashida, M.; Hays, E.; Horan, D.; Hughes, R. E.; Jóhannesson, G.; Johnson, A. S.; Johnson, W. N.; Kadler, M.; Kamae, T.; Katagiri, H.; Kataoka, J.; Knödlseder, J.; Kuss, M.; Lande, J.; Latronico, L.; Lee, S.-H.; Longo, F.; Loparco, F.; Lott, B.; Lovellette, M. N.; Lubrano, P.; Madejski, G. M.; Makeev, A.; Max-Moerbeck, W.; Mazziotta, M. N.; McEnery, J. E.; Mehault, J.; Michelson, P. F.; Mitthumsiri, W.; Mizuno, T.; Monte, C.; Monzani, M. E.; Morselli, A.; Moskalenko, I. V.; Murgia, S.; Nakamori, T.; Naumann-Godo, M.; Nishino, S.; Nolan, P. L.; Norris, J. P.; Nuss, E.; Ohsugi, T.; Okumura, A.; Omodei, N.; Orlando, E.; Ormes, J. F.; Ozaki, M.; Paneque, D.; Panetta, J. H.; Parent, D.; Pavlidou, V.; Pearson, T. J.; Pelassa, V.; Pepe, M.; Pesce-Rollins, M.; Pierbattista, M.; Piron, F.; Porter, T. A.; Rainò, S.; Rando, R.; Razzano, M.; Readhead, A.; Reimer, A.; Reimer, O.; Reyes, L. C.; Richards, J. L.; Ritz, S.; Roth, M.; Sadrozinski, H. F.-W.; Sanchez, D.; Sander, A.; Sgrò, C.; Siskind, E. J.; Smith, P. D.; Spandre, G.; Spinelli, P.; Stawarz, Ł.; Stevenson, M.; Strickman, M. S.; Suson, D. J.; Takahashi, H.; Takahashi, T.; Tanaka, T.; Thayer, J. G.; Thayer, J. B.; Thompson, D. J.; Tibaldo, L.; Torres, D. F.; Tosti, G.; Tramacere, A.; Troja, E.; Usher, T. L.; Vandenbroucke, J.; Vasileiou, V.; Vianello, G.; Vilchez, N.; Vitale, V.; Waite, A. P.; Wang, P.; Wehrle, A. E.; Winer, B. L.; Wood, K. S.; Yang, Z.; Yatsu, Y.; Ylinen, T.; Zensus, J. A.; Ziegler, M.; Fermi LAT Collaboration; Aleksić, J.; Antonelli, L. A.; Antoranz, P.; Backes, M.; Barrio, J. A.; Becerra González, J.; Bednarek, W.; Berdyugin, A.; Berger, K.; Bernardini, E.; Biland, A.; Blanch, O.; Bock, R. K.; Boller, A.; Bonnoli, G.; Bordas, P.; Borla Tridon, D.; Bosch-Ramon, V.; Bose, D.; Braun, I.; Bretz, T.; Camara, M.; Carmona, E.; Carosi, A.; Colin, P.; Colombo, E.; Contreras, J. L.; Cortina, J.; Covino, S.; Dazzi, F.; de Angelis, A.; De Cea del Pozo, E.; Delgado Mendez, C.; De Lotto, B.; De Maria, M.; De Sabata, F.; Diago Ortega, A.; Doert, M.; Domínguez, A.; Dominis Prester, D.; Dorner, D.; Doro, M.; Elsaesser, D.; Ferenc, D.; Fonseca, M. V.; Font, L.; García López, R. J.; Garczarczyk, M.; Gaug, M.; Giavitto, G.; Godinovi, N.; Hadasch, D.; Herrero, A.; Hildebrand, D.; Höhne-Mönch, D.; Hose, J.; Hrupec, D.; Jogler, T.; Klepser, S.; Krähenbühl, T.; Kranich, D.; Krause, J.; La Barbera, A.; Leonardo, E.; Lindfors, E.; Lombardi, S.; López, M.; Lorenz, E.; Majumdar, P.; Makariev, E.; Maneva, G.; Mankuzhiyil, N.; Mannheim, K.; Maraschi, L.; Mariotti, M.; Martínez, M.; Mazin, D.; Meucci, M.; Miranda, J. M.; Mirzoyan, R.; Miyamoto, H.; Moldón, J.; Moralejo, A.; Nieto, D.; Nilsson, K.; Orito, R.; Oya, I.; Paoletti, R.; Paredes, J. M.; Partini, S.; Pasanen, M.; Pauss, F.; Pegna, R. G.; Perez-Torres, M. A.; Persic, M.; Peruzzo, J.; Pochon, J.; Prada, F.; Prada Moroni, P. G.; Prandini, E.; Puchades, N.; Puljak, I.; Reichardt, T.; Rhode, W.; Ribó, M.; Rico, J.; Rissi, M.; Rügamer, S.; Saggion, A.; Saito, K.; Saito, T. Y.; Salvati, M.; Sánchez-Conde, M.; Satalecka, K.; Scalzotto, V.; Scapin, V.; Schultz, C.; Schweizer, T.; Shayduk, M.; Shore, S. N.; Sierpowska-Bartosik, A.; Sillanpää, A.; Sitarek, J.; Sobczynska, D.; Spanier, F.; Spiro, S.; Stamerra, A.; Steinke, B.; Storz, J.; Strah, N.; Struebig, J. C.; Suric, T.; Takalo, L. O.; Tavecchio, F.; Temnikov, P.; Terzić, T.; Tescaro, D.; Teshima, M.; Vankov, H.; Wagner, R. M.; Weitzel, Q.; Zabalza, V.; Zandanel, F.; Zanin, R.; MAGIC Collaboration; Villata, M.; Raiteri, C.; Aller, H. D.; Aller, M. F.; Chen, W. P.; Jordan, B.; Koptelova, E.; Kurtanidze, O. M.; Lähteenmäki, A.; McBreen, B.; Larionov, V. M.; Lin, C. S.; Nikolashvili, M. G.; Reinthal, R.; Angelakis, E.; Capalbi, M.; Carramiñana, A.; Carrasco, L.; Cassaro, P.; Cesarini, A.; Falcone, A.; Gurwell, M. A.; Hovatta, T.; Kovalev, Yu. A.; Kovalev, Y. Y.; Krichbaum, T. P.; Krimm, H. A.; Lister, M. L.; Moody, J. W.; Maccaferri, G.; Mori, Y.; Nestoras, I.; Orlati, A.; Pace, C.; Pagani, C.; Pearson, R.; Perri, M.; Piner, B. G.; Ros, E.; Sadun, A. C.; Sakamoto, T.; Tammi, J.; Zook, A.

    2011-08-01

    We report on the γ-ray activity of the high-synchrotron-peaked BL Lacertae object Markarian 421 (Mrk 421) during the first 1.5 years of Fermi operation, from 2008 August 5 to 2010 March 12. We find that the Large Area Telescope (LAT) γ-ray spectrum above 0.3 GeV can be well described by a power-law function with photon index Γ = 1.78 ± 0.02 and average photon flux F(> 0.3 GeV) = (7.23 ± 0.16) × 10-8 ph cm-2 s-1. Over this time period, the Fermi-LAT spectrum above 0.3 GeV was evaluated on seven-day-long time intervals, showing significant variations in the photon flux (up to a factor ~3 from the minimum to the maximum flux) but mild spectral variations. The variability amplitude at X-ray frequencies measured by RXTE/ASM and Swift/BAT is substantially larger than that in γ-rays measured by Fermi-LAT, and these two energy ranges are not significantly correlated. We also present the first results from the 4.5 month long multifrequency campaign on Mrk 421, which included the VLBA, Swift, RXTE, MAGIC, the F-GAMMA, GASP-WEBT, and other collaborations and instruments that provided excellent temporal and energy coverage of the source throughout the entire campaign (2009 January 19 to 2009 June 1). During this campaign, Mrk 421 showed a low activity at all wavebands. The extensive multi-instrument (radio to TeV) data set provides an unprecedented, complete look at the quiescent spectral energy distribution (SED) for this source. The broadband SED was reproduced with a leptonic (one-zone synchrotron self-Compton) and a hadronic model (synchrotron proton blazar). Both frameworks are able to describe the average SED reasonably well, implying comparable jet powers but very different characteristics for the blazar emission site.

  2. Pulsed Gamma-Rays From PSR J2021 3651 with the Fermi Large Area Telescope

    Energy Technology Data Exchange (ETDEWEB)

    Abdo, Aous A.; /Naval Research Lab, Wash., D.C.; Ackermann, M.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Ajello, Marco; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Atwood, William B.; /UC, Santa Cruz; Baldini, L.; /INFN, Pisa; Ballet, J.; /DAPNIA, Saclay; Barbiellini, Guido; /INFN, Trieste /Trieste U.; Bastieri, Denis; /INFN, Padua /Padua U.; Battelino, Milan; /Royal Inst. Tech., Stockholm; Baughman, B.M.; /Ohio State U.; Bechtol, K.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bellazzini, Ronaldo; /INFN, Pisa; Berenji, Bijan; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bloom, Elliott D.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bogaert, G.; /Ecole Polytechnique; Borgland, Anders W.; /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept.; Bregeon, J.; /INFN, Pisa; Brez, A.; /INFN, Pisa; Brigida, M.; /Bari U. /INFN, Bari; Bruel, P.; /Ecole Polytechnique; Burnett, Thompson H.; /Washington U., Seattle /Bari U. /INFN, Bari /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Columbia U. /IASF, Milan /IASF, Milan /DAPNIA, Saclay /INFN, Perugia /Perugia U. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /George Mason U. /Naval Research Lab, Wash., D.C. /IASF, Milan /IASF, Milan /NASA, Goddard /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /INFN, Perugia /Perugia U. /LPCE, Orleans /Montpellier U. /Sonoma State U. /Royal Inst. Tech., Stockholm /Stockholm U. /ASI, Rome /NRAO, Charlottesville /Naval Research Lab, Wash., D.C. /INFN, Trieste /Pavia U. /Bari U. /INFN, Bari /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /UC, Santa Cruz /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /Stanford U., HEPL /KIPAC, Menlo Park /Stanford U., Phys. Dept. /CENBG, Gradignan /CENBG, Gradignan /Manchester U. /Montpellier U. /Bari U. /INFN, Bari; /more authors..

    2011-11-30

    We report the detection of pulsed gamma-rays from the young, spin-powered radio pulsar PSR J2021+3651 using data acquired with the Large Area Telescope (LAT) on the Fermi Gamma-ray Space Telescope (formerly GLAST). The light curve consists of two narrow peaks of similar amplitude separated by 0.468 {+-} 0.002 in phase. The first peak lags the maximum of the 2 GHz radio pulse by 0.162 {+-} 0.004 {+-} 0.01 in phase. The integral gamma-ray photon flux above 100 MeV is (56 {+-} 3 {+-} 11) x 10{sup -8} cm{sup -2} s{sup -1}. The photon spectrum is well-described by an exponentially cut-off power law of the form dF/dE = kE{sup -{Gamma}}e{sup (-E/E{sub c})} where the energy E is expressed in GeV. The photon index is {Gamma} = 1.5 {+-} 0.1 {+-} 0.1 and the exponential cut-off is E{sub c} = 2.4 {+-} 0.3 {+-} 0.5 GeV. The first uncertainty is statistical and the second is systematic. The integral photon flux of the bridge is approximately 10% of the pulsed emission, and the upper limit on off-pulse gamma-ray emission from a putative pulsar wind nebula is < 10% of the pulsed emission at the 95% confidence level. Radio polarization measurements yield a rotation measure of RM = 524 {+-} 4 rad m{sup -2} but a poorly constrained magnetic geometry. Re-analysis of Chandra data enhanced the significance of the weak X-ray pulsations, and the first peak is roughly phase-aligned with the first gamma-ray peak. We discuss the emission region and beaming geometry based on the shape and spectrum of the gamma-ray light curve combined with radio and X-ray measurements, and the implications for the pulsar distance. Gamma-ray emission from the polar cap region seems unlikely for this pulsar.

  3. Fermi Large Area Telescope Observations of the Supernova Remnant G8.7-0.1

    Energy Technology Data Exchange (ETDEWEB)

    Ajello, M.; Allafort, A.; /Stanford U., HEPL /KIPAC, Menlo Park /SLAC; Baldini, L.; /INFN, Pisa; Ballet, J.; /AIM, Saclay; Barbiellini, G.; /INFN, Trieste /Trieste U.; Bastieri, D.; /INFN, Padua /Padua U.; Bechtol, K.; /Stanford U., HEPL /KIPAC, Menlo Park /SLAC; Bellazzini, R.; /INFN, Pisa; Berenji, B.; Blandford, R.D.; Bloom, E.D.; /Stanford U., HEPL /KIPAC, Menlo Park /SLAC; Bonamente, E.; /INFN, Perugia /Perugia U.; Borgland, A.W.; /Stanford U., HEPL /KIPAC, Menlo Park /SLAC; Bregeon, J.; /INFN, Pisa; Brigida, M.; /Bari Polytechnic /INFN, Bari; Bruel, P.; /Ecole Polytechnique; Buehler, R.; /Stanford U., HEPL /KIPAC, Menlo Park /SLAC; Buson, S.; /INFN, Padua /Padua U.; Caliandro, G.A.; /CSIC, Catalunya; Cameron, R.A.; /Stanford U., HEPL /KIPAC, Menlo Park /SLAC; Caraveo, P.A.; /IASF, Milan /AIM, Saclay /INFN, Perugia /Perugia U. /Stanford U., HEPL /KIPAC, Menlo Park /SLAC /Unlisted, US /Naval Research Lab, Wash., D.C. /Perugia U. /ASDC, Frascati /Stanford U., HEPL /KIPAC, Menlo Park /SLAC /Montpellier U. /ASDC, Frascati /Udine U. /INFN, Trieste /Bari Polytechnic /INFN, Bari /Naval Research Lab, Wash., D.C. /Stanford U., HEPL /KIPAC, Menlo Park /SLAC /Bari Polytechnic /INFN, Bari /Ecole Polytechnique /NASA, Goddard /Stanford U., HEPL /KIPAC, Menlo Park /SLAC /Udine U. /INFN, Trieste /Trieste Observ. /Hiroshima U. /Nagoya U. /Bari Polytechnic /INFN, Bari /INFN, Bari /ASDC, Frascati /INFN, Perugia /Perugia U. /Bari Polytechnic /INFN, Bari /ASDC, Frascati /Bari Polytechnic /INFN, Bari /Bologna Observ. /Stanford U., HEPL /KIPAC, Menlo Park /SLAC /Naval Research Lab, Wash., D.C. /Alabama U., Huntsville /CSIC, Catalunya /Hiroshima U. /NASA, Goddard /Hiroshima U.; /more authors..

    2012-09-14

    We present a detailed analysis of the GeV gamma-ray emission toward the supernova remnant (SNR) G8.7-0.1 with the Large Area Telescope (LAT) on board the Fermi Gamma-ray Space Telescope. An investigation of the relationship between G8.7-0.1 and the TeV unidentified source HESS J1804-216 provides us with an important clue on diffusion process of cosmic rays if particle acceleration operates in the SNR. The GeV gamma-ray emission is extended with most of the emission in positional coincidence with the SNR G8.7-0.1 and a lesser part located outside the western boundary of G8.7-0.1. The region of the gamma-ray emission overlaps spatially connected molecular clouds, implying a physical connection for the gamma-ray structure. The total gamma-ray spectrum measured with LAT from 200 MeV-100 GeV can be described by a broken power-law function with a break of 2.4 {+-} 0.6 (stat) {+-} 1.2 (sys) GeV, and photon indices of 2.10 {+-} 0.06 (stat) {+-} 0.10 (sys) below the break and 2.70 {+-} 0.12 (stat) {+-} 0.14 (sys) above the break. Given the spatial association among the gamma rays, the radio emission of G8.7-0.1, and the molecular clouds, the decay of p0s produced by particles accelerated in the SNR and hitting the molecular clouds naturally explains the GeV gamma-ray spectrum. We also find that the GeV morphology is not well represented by the TeV emission from HESS J1804-216 and that the spectrum in the GeV band is not consistent with the extrapolation of the TeV gamma-ray spectrum. The spectral index of the TeV emission is consistent with the particle spectral index predicted by a theory that assumes energy-dependent diffusion of particles accelerated in an SNR. We discuss the possibility that the TeV spectrum originates from the interaction of particles accelerated in G8.7-0.1 with molecular clouds, and we constrain the diffusion coefficient of the particles.

  4. GeV Observations of star-forming glaxies with the FERMI Large Area Telescope

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, M.; /DESY, Zeuthen; Ajello, M.; Allafort, A.; /SLAC /KIPAC, Menlo Park; Baldini, L.; /INFN, Pisa; Ballet, J.; /AIM, Saclay; Bastieri, D.; /INFN, Padua /Padua U.; Bechtol, K.; /SLAC /KIPAC, Menlo Park; Bellazzini, R.; /INFN, Pisa; Berenji, B.; Bloom, E.D.; /SLAC /KIPAC, Menlo Park; Bonamente, E.; /INFN, Perugia /Perugia U.; Borgland, A.W.; /SLAC /KIPAC, Menlo Park; Bouvier, A.; /UC, Santa Cruz; Bregeon, J.; /INFN, Pisa; Brigida, M.; /Bari Polytechnic /INFN, Bari; Bruel, P.; /Ecole Polytechnique; Buehler, R.; /SLAC /KIPAC, Menlo Park; Buson, S.; /INFN, Padua /Padua U.; Caliandro, G.A.; /CSIC, Catalunya; Cameron, R.A.; /SLAC /KIPAC, Menlo Park; Caraveo, P.A.; /Brera Observ. /AIM, Saclay /INFN, Perugia /Perugia U. /SLAC /KIPAC, Menlo Park /George Mason U. /Artep Inc. /Natl. Res. Coun., Wash., D.C. /Artep Inc. /SLAC /KIPAC, Menlo Park /Buenos Aires, IAFE /NASA, Goddard /Perugia U. /ASDC, Frascati /SLAC /KIPAC, Menlo Park /Montpellier U. /Stockholm U. /Stockholm U., OKC /Royal Swedish Acad. Sci. /ASDC, Frascati /Bari Polytechnic /INFN, Bari /Naval Research Lab, Wash., D.C. /SLAC /KIPAC, Menlo Park /Bari Polytechnic /INFN, Bari /Ecole Polytechnique /Hiroshima U. /SLAC /KIPAC, Menlo Park /Bari Polytechnic /INFN, Bari /INFN, Bari /ASDC, Frascati /INFN, Perugia /Perugia U. /Bari Polytechnic /INFN, Bari /SLAC /KIPAC, Menlo Park /AIM, Saclay /Alabama U., Huntsville /INFN, Padua /CSIC, Catalunya /SLAC /KIPAC, Menlo Park /Kyoto U. /NASA, Goddard /Ohio State U., CCAPP /Iceland U.; /more authors..

    2012-08-07

    Recent detections of the starburst galaxies M82 and NGC 253 by gamma-ray telescopes suggest that galaxies rapidly forming massive stars are more luminous at gamma-ray energies compared to their quiescent relatives. Building upon those results, we examine a sample of 69 dwarf, spiral, and luminous and ultraluminous infrared galaxies at photon energies 0.1-100 GeV using 3 years of data collected by the Large Area Telescope (LAT) on the Fermi Gamma-ray Space Telescope (Fermi). Measured fluxes from significantly detected sources and flux upper limits for the remaining galaxies are used to explore the physics of cosmic rays in galaxies. We find further evidence for quasi-linear scaling relations between gamma-ray luminosity and both radio continuum luminosity and total infrared luminosity which apply both to quiescent galaxies of the Local Group and low-redshift starburst galaxies (conservative P-values lesssim 0.05 accounting for statistical and systematic uncertainties). The normalizations of these scaling relations correspond to luminosity ratios of log (L 0.1-100 GeV/L 1.4 GHz) = 1.7 ± 0.1(statistical) ± 0.2(dispersion) and log (L 0.1-100 GeV/L 8-1000 μm) = –4.3 ± 0.1(statistical) ± 0.2(dispersion) for a galaxy with a star formation rate of 1 M ⊙ yr–1, assuming a Chabrier initial mass function. Using the relationship between infrared luminosity and gamma-ray luminosity, the collective intensity of unresolved star-forming galaxies at redshifts 0 < z < 2.5 above 0.1 GeV is estimated to be 0.4-2.4 × 10–6 ph cm–2 s–1 sr–1 (4%-23% of the intensity of the isotropic diffuse component measured with the LAT). We anticipate that ~10 galaxies could be detected by their cosmic-ray-induced gamma-ray emission during a 10 year Fermi mission.

  5. Large-area synthesis of high-quality and uniform monolayer WS2 on reusable Au foils

    Science.gov (United States)

    Gao, Yang; Liu, Zhibo; Sun, Dong-Ming; Huang, Le; Ma, Lai-Peng; Yin, Li-Chang; Ma, Teng; Zhang, Zhiyong; Ma, Xiu-Liang; Peng, Lian-Mao; Cheng, Hui-Ming; Ren, Wencai

    2015-10-01

    Large-area monolayer WS2 is a desirable material for applications in next-generation electronics and optoelectronics. However, the chemical vapour deposition (CVD) with rigid and inert substrates for large-area sample growth suffers from a non-uniform number of layers, small domain size and many defects, and is not compatible with the fabrication process of flexible devices. Here we report the self-limited catalytic surface growth of uniform monolayer WS2 single crystals of millimetre size and large-area films by ambient-pressure CVD on Au. The weak interaction between the WS2 and Au enables the intact transfer of the monolayers to arbitrary substrates using the electrochemical bubbling method without sacrificing Au. The WS2 shows high crystal quality and optical and electrical properties comparable or superior to mechanically exfoliated samples. We also demonstrate the roll-to-roll/bubbling production of large-area flexible films of uniform monolayer, double-layer WS2 and WS2/graphene heterostructures, and batch fabrication of large-area flexible monolayer WS2 film transistor arrays.

  6. IS ISO 9000 CERTIFICATION LOSING ITS CREDIBILITY?

    Directory of Open Access Journals (Sweden)

    P.R. Ramesh

    2013-03-01

    Full Text Available ISO certification was a great hope for many stakeholders in India for making the country strong in terms of quality practices. It was a blessing in disguise when in early nineties; buyers were imposing conditions that you should be ISO compliant to do business with them. ISO was a great system to bring in improvements in the way an organization functions. But unfortunately some have adopted a short cut approach in getting the certification done. It is only just before the audit team comes for re-inspection that firms start removing dust from the quality manual files so that they can pretend that that they follow those systems. But a real commitment to adhering to these systems is missing. The paper describes such scenario existing in some quarters in India and warns against such practices for the overall good of the system.

  7. ISO 22000 FOOD SAFETY MANAGEMENT SYSTEM

    OpenAIRE

    Başaran, Burhan

    2015-01-01

    The increase in the level of welfare of the countriesand the awareness of the consumers have forced the firms in the food sector toseek for new pursuits. In this re­gard, ISO 22000 is the most commonlypreferred food safety system. This study aims to contribute the share­holdersand the researchers studying this topic by in­terpreting the lateststudies in this field and determine the critical relationships inorder to picture an effective and productive implementation ofISO22000 which is one of ...

  8. ISO Abbreviations for Names of Polymeric Substances

    Directory of Open Access Journals (Sweden)

    V. Jarm

    2011-04-01

    Full Text Available The use of abbreviations for the names of polymers is practical and economic in written and spoken language. Taking into consideration the several hundreds of polymers appearing in literature annually, some of them having complicated structures, it is almost impossible to derive a systematic and unique abbreviation to polymer structures. Therefore, IUPAC has taken over the well-established ISO list of abbreviated terms (about 120 items mainly selected on the basis of the scale of production. The presented ISO nomenclature is not necessarily in accord with IUPAC recommendations.

  9. Design, development, and manufacturing of highly advanced and cost effective aluminium sputtering plant for large area telescopic mirrors.

    Science.gov (United States)

    Pillai, Rajeev R.; Sanjith K., K.; Mohanachandran, K.; Sakhamuri, Nagarjun; Shukla, Vishal; Gupta, Alok

    2012-09-01

    The design, development and manufacturing of a fully automated and cost effective aluminum sputtering unit for the deposition of aluminum on large area telescopic mirrors (maximum diameter of 3600mm) is presented here. The unit employs DC planar magnetron sputtering for the deposition process. A large area glow discharge unit is also designed for the pre-cleaning of the mirrors prior to aluminum coating. A special kinematic support structure with rotation is designed to support heavy mirrors of large area to minimize the deflection of the mirrors during deposition process. A custom designed 'mask' is employed in the magnetron system to improve the thickness uniformity within plant. Special fixtures have been designed for the system to accommodate smaller mirrors and studies have been conducted for the coatings and reported in the paper. The unit was successfully tested at HHV facility in Bangalore and will be installed at the ARIES Facility, Nainital.

  10. FERMI LARGE AREA TELESCOPE STUDY OF COSMIC RAYS AND THE INTERSTELLAR MEDIUM IN NEARBY MOLECULAR CLOUDS

    Energy Technology Data Exchange (ETDEWEB)

    Ackermann, M. [Deutsches Elektronen Synchrotron DESY, D-15738 Zeuthen (Germany); Ajello, M.; Allafort, A.; Bechtol, K.; Berenji, B.; Blandford, R. D.; Bloom, E. D.; Borgland, A. W.; Bottacini, E.; Buehler, R. [W. W. Hansen Experimental Physics Laboratory, Kavli Institute for Particle Astrophysics and Cosmology, Department of Physics and SLAC National Accelerator Laboratory, Stanford University, Stanford, CA 94305 (United States); Baldini, L.; Bellazzini, R.; Bregeon, J. [Istituto Nazionale di Fisica Nucleare, Sezione di Pisa, I-56127 Pisa (Italy); Ballet, J. [Laboratoire AIM, CEA-IRFU/CNRS/Universite Paris Diderot, Service d' Astrophysique, CEA Saclay, F-91191 Gif sur Yvette (France); Barbiellini, G. [Istituto Nazionale di Fisica Nucleare, Sezione di Trieste, I-34127 Trieste (Italy); Bastieri, D. [Istituto Nazionale di Fisica Nucleare, Sezione di Padova, I-35131 Padova (Italy); Bonamente, E. [Istituto Nazionale di Fisica Nucleare, Sezione di Perugia, I-06123 Perugia (Italy); Brandt, T. J. [CNRS, IRAP, F-31028 Toulouse cedex 4 (France); Brigida, M. [Dipartimento di Fisica ' M. Merlin' dell' Universita e del Politecnico di Bari, I-70126 Bari (Italy); Bruel, P., E-mail: hayashi@hep01.hepl.hiroshima-u.ac.jp, E-mail: mizuno@hep01.hepl.hiroshima-u.ac.jp [Laboratoire Leprince-Ringuet, Ecole polytechnique, CNRS/IN2P3, Palaiseau (France); and others

    2012-08-10

    We report an analysis of the interstellar {gamma}-ray emission from the Chamaeleon, R Coronae Australis (R CrA), and Cepheus and Polaris flare regions with the Fermi Large Area Telescope. They are among the nearest molecular cloud complexes, within {approx}300 pc from the solar system. The {gamma}-ray emission produced by interactions of cosmic rays (CRs) and interstellar gas in those molecular clouds is useful to study the CR densities and distributions of molecular gas close to the solar system. The obtained {gamma}-ray emissivities above 250 MeV are (5.9 {+-} 0.1{sub stat}{sup +0.9}{sub -1.0sys}) Multiplication-Sign 10{sup -27} photons s{sup -1} sr{sup -1} H-atom{sup -1}, (10.2 {+-} 0.4{sub stat}{sup +1.2}{sub -1.7sys}) Multiplication-Sign 10{sup -27} photons s{sup -1} sr{sup -1} H-atom{sup -1}, and (9.1 {+-} 0.3{sub stat}{sup +1.5}{sub -0.6sys}) Multiplication-Sign 10{sup -27} photons s{sup -1} sr{sup -1} H-atom{sup -1} for the Chamaeleon, R CrA, and Cepheus and Polaris flare regions, respectively. Whereas the energy dependences of the emissivities agree well with that predicted from direct CR observations at the Earth, the measured emissivities from 250 MeV to 10 GeV indicate a variation of the CR density by {approx}20% in the neighborhood of the solar system, even if we consider systematic uncertainties. The molecular mass calibrating ratio, X{sub CO} = N(H{sub 2})/W{sub CO}, is found to be (0.96 {+-} 0.06{sub stat}{sup +0.15}{sub -0.12sys}) Multiplication-Sign 10{sup 20} H{sub 2}-molecule cm{sup -2} (K km s{sup -1}){sup -1}, (0.99 {+-} 0.08{sub stat}{sup +0.18}{sub -0.10sys}) Multiplication-Sign 10{sup 20} H{sub 2}-molecule cm{sup -2} (K km s{sup -1}){sup -1}, and (0.63 {+-} 0.02{sub stat}{sup +0.09}{sub -0.07sys}) Multiplication-Sign 10{sup 20} H{sub 2}-molecule cm{sup -2} (K km s{sup -1}){sup -1} for the Chamaeleon, R CrA, and Cepheus and Polaris flare regions, respectively, suggesting a variation of X{sub CO} in the vicinity of the solar system. From the

  11. Mining the Herschel-Astrophysical Terahertz Large Area Survey: submillimetre-selected blazars in equatorial fields

    Science.gov (United States)

    López-Caniego, M.; González-Nuevo, J.; Massardi, M.; Bonavera, L.; Herranz, D.; Negrello, M.; De Zotti, G.; Carrera, F. J.; Danese, L.; Fleuren, S.; Hardcastle, M.; Jarvis, M. J.; Klöckner, H.-R.; Mauch, T.; Procopio, P.; Righini, S.; Sutherland, W.; Auld, R.; Baes, M.; Buttiglione, S.; Clark, C. J. R.; Cooray, A.; Dariush, A.; Dunne, L.; Dye, S.; Eales, S.; Hopwood, R.; Hoyos, C.; Ibar, E.; Ivison, R. J.; Maddox, S.; Valiante, E.

    2013-04-01

    The Herschel-Astrophysical Terahertz Large Area Survey (H-ATLAS) provides an unprecedented opportunity to search for blazars at sub-mm wavelengths. We cross-matched the Faint Images of the Radio Sky at Twenty-cm (FIRST) radio source catalogue with the 11 655 sources brighter than 35 mJy at 500 μm in the ˜135 deg2 of the sky covered by the H-ATLAS equatorial fields at 9h and 15h, plus half of the field at 12h. We found that 379 of the H-ATLAS sources have a FIRST counterpart within 10 arcsec, including eight catalogued blazars (plus one known blazar that was found at the edge of one of the H-ATLAS maps). To search for additional blazar candidates we have devised new diagnostic diagrams and found that known blazars occupy a region of the log (S500 μm/S350 μm) versus log (S500 μm/S1.4 GHz) plane separated from that of sub-mm sources with radio emission powered by star formation, but shared with radio galaxies and steep-spectrum radio quasars. Using this diagnostic we have selected 12 further possible candidates that turn out to be scattered in the (r - z) versus (u - r) plane or in the Wide-Field Infrared Survey Explorer colour-colour diagram, where known blazars are concentrated in well defined strips. This suggests that the majority of them are not blazars. Based on an inspection of all the available photometric data, including unpublished VISTA Kilo-degree Infrared Galaxy survey photometry and new radio observations, we found that the spectral energy distributions (SEDs) of only one out of the 12 newly selected sources are compatible with being synchrotron dominated at least up to 500 μm, i.e. with being a blazar. Another object may consist of a faint blazar nucleus inside a bright star-forming galaxy. The possibility that some blazar hosts are endowed with active star formation is supported by our analysis of the SEDs of Planck Early Release Compact Source Catalogue blazars detected at both 545 and 857 GHz. The estimated rest-frame synchrotron peak

  12. Thickness determination of large-area films of yttria-stabilized zirconia produced by pulsed laser deposition

    DEFF Research Database (Denmark)

    Pryds, N.; Christensen, Bo Toftmann; Bilde-Sørensen, Jørgen

    2006-01-01

    Films of yuria-stabilized zirconia (YSZ) on a polished silicon substrate of diameter up to 125 mm have been produced in a large-area pulsed laser deposition (PLD) setup under typical PLD conditions. The film thickness over the full film area has been determined by energy-dispersive Xray spectrome......Films of yuria-stabilized zirconia (YSZ) on a polished silicon substrate of diameter up to 125 mm have been produced in a large-area pulsed laser deposition (PLD) setup under typical PLD conditions. The film thickness over the full film area has been determined by energy-dispersive Xray...

  13. Method of making large area conformable shape structures for detector/sensor applications using glass drawing technique and postprocessing

    Science.gov (United States)

    Ivanov, Ilia N [Knoxville, TN; Simpson, John T [Clinton, IN

    2012-01-24

    A method of making a large area conformable shape structure comprises drawing a plurality of tubes to form a plurality of drawn tubes, and cutting the plurality of drawn tubes into cut drawn tubes of a predetermined shape. The cut drawn tubes have a first end and a second end along the longitudinal direction of the cut drawn tubes. The method further comprises conforming the first end of the cut drawn tubes into a predetermined curve to form the large area conformable shape structure, wherein the cut drawn tubes contain a material.

  14. [Update to ISO 15189:2012, and future prospects].

    Science.gov (United States)

    Shimoda, Katsuji; Kubono, Katsuo

    2014-06-01

    ISO (the International Organization for Standardization) is a worldwide federation of national standard bodies (ISO member bodies). The work of preparing international standards is normally carried out through ISO technical committees. ISO 15189 was prepared by Technical Committee ISO/TC 212, clinical laboratory testing, and in vitro diagnostic test systems. This third edition replaces the second edition (ISO 15189:2007), which was technically revised. Medical laboratory services are essential for patient care and, therefore, have to be available to meet the needs of all patients and the clinical personnel responsible for the care of those patients.

  15. Europe's space telescope ISO finds water in distant places

    Science.gov (United States)

    1997-04-01

    , which sometimes collide with the planets, as seen in the spectacular impacts of Comet Shoemaker-Levy 9 on Jupiter in 1994. The leader of the ISO team that found the water vapour in the outer planets is Helmut Feuchtgruber of the Max-Planck Institut fur Extraterrestrische Physik at Garching, Germany. He works at the ISO operations centre at Villafranca, Spain. For him, the theoretical puzzle of the water vapour is full of significance for planetary science. "The upper atmosphere of the Earth is very dry because water vapour rising from the oceans or the land freezes into clouds," Feuchtgruber comments. "We would expect the same kind of lid to seal in the water vapour of the outer planets. What we see in Saturn, Uranus and Neptune probably comes from an outside source. This has important implications for our theories of the origin and evolution of all planetary atmospheres, including the Earth's." Helmut Feuchtgruber, Emmanuel Lellouch and their colleagues are preparing a theoretical analysis of the likely origin of the water vapour in the outer planets, which they hope to publish in the next few months. European success story Rated by a panel of American astronomers as "the major infrared mission of the decade", ISO is a special achievement for ESA -- and for Europe's astronomers and engineers. Advanced technology created ISO's extremely cold telescope capable of observing cool regions of the Universe. Multinational teams, with leaders in France, Germany, the Netherlands and the United Kingdom, developed the special scientific instruments. A European Ariane 44P launcher put ISO into orbit on 17 November 1995. ISO's supply of superfluid helium, which keeps the telescope and instruments cold, is expected to run out at about the end of 1997, giving it a life several months longer than required in the specification. Requests from the world's astronomers for observations with ISO have always far exceeded the available operating time, even though the spacecraft's controllers

  16. ISO sertifikaat aitab otsustada / Toomas Udu

    Index Scriptorium Estoniae

    Udu, Toomas

    2005-01-01

    Ilmunud ka: Delovõje Vedomosti : Transport i logistika 25. mai lk. 8. Teenuse kvaliteedi näitajad logistikafirmas ISO standardi alusel. Vt. samas: Eestis kasutatakse kolme kvaliteedistandardit; Kuidas mõjutada kvaliteeti läbi juhtimissüsteemi

  17. New ISO standards for hearing protectors (A)

    DEFF Research Database (Denmark)

    Poulsen, Torben

    2000-01-01

    Working Group 17 under ISO/TC43/SC1 deals with measurement of hearing protector attenuation. WG17 is presently involved in revision of the present 4869-1 standard (especially sound field requirements and reproducibility estimations) and formulation of a new standard where inexperienced hearing...

  18. ISO 19512 : The land administration domain model

    NARCIS (Netherlands)

    Lemmen, C.H.J.; Van Oosterom, P.J.M.

    2011-01-01

    Focus of this paper is on the Land Administration Domain Model which is under development as an International Standard at ISO. This development is an initiative of the International Federation of Surveyors – FIG. The International Standard is expected to be published in 2012. Why is this development

  19. [ISO 15189 accreditation acquisition and the procedure].

    Science.gov (United States)

    Kayamori, Yuzo; Toyofuku, Mitsuko; Hotta, Taeko; Fujise, Masako; Egashira, Sadaomi; Kang, Dongchon

    2009-02-01

    Recently, the transparency of customer service and organization administration has been required in many fields. Objective evaluation by a third person is necessary. This also applies to medical institutions; whether the responsibility for explanation to patients and the transparency of medical activities are open is currently emphasized. ISO15189, which specifically applies to clinical laboratories, is an international standard issued in 2003. This standard has commonly been employed as an accreditation tool for clinical laboratories in Europe and Australia. In Japan, the Japan Accreditation Board for Conformity Assessment (JAB) introduced this system as an accreditation tool for clinical laboratories in cooperation with the Japanese Committee for Clinical Laboratory Standards (JCCLS) in 2004. In April 2005, accreditation work was started. Among the ISO systems, ISO15189 is perhaps the first standard specialized in the field of medical practice. This reflects the fact that the importance of clinical examination is internationally recognized. In this report, we summarize the process via which our laboratory was awarded this ISO and the situation in which we passed two surveillances.

  20. Enthusiasm for Europe's space telescope ISO

    Science.gov (United States)

    1996-11-01

    "Are the most luminous galaxies powered by extreme rates of star formation, or do they harbour black-hole-powered active nuclei as well?" Scientists lead by Reinhard Genzel at Max Planck Institut fur extra terrestrische Physik in Garching, Germany, have used ISO's Short Wavelength Spectrometer to give an answer. Writing in the London journal Nature, an independent commentator, Gerry Gilmore of the Institute of Astronomy in Cambridge, considers that their papers in Astronomy and Astrophysics give a clear answer to this question. The "remarkable result" according to Gilmore is that none of three ultra-luminous infrared galaxies studied by ISO requires an active nucleus to account for the emissions, which arise from rapid star formation. About another ISO target Gilmore writes: "In one lovely example, of two intersecting disk galaxies known as the Antennae, it is even possible to resolve the spot where the two disks currently cross, and to see the progression of star formation across the disk as the two galaxies orbit through each other." (Nature, 21 November 1996, p. 211) One year after its launch, ISO is exceptionally popular among astronomers, not only in Europe but worldwide. A panel of American astronomers, reporting to NASA on the scientific merits of eight astrophysical space missions, gives ISO the highest ranking and calls it "the major infrared mission of the decade". At a time when NASA is reducing its budgets for some astrophysical missions, its funding of ISO-related research is increasing. The demand for a share in ISO's unique view of the infrared universe is insatiable. ESA has been overwhelmed by new proposals for observations, coming from 511 groups of astronomers in ESA's own Member States and in the USA and Japan. Although ISO is extremely efficient, performing an average of 45 observations a day, it could not cope with 16,000 observations requested as additions to ISO's already busy programme for 1997. The time allocation committee has had to turn

  1. A NEW FOOD CHAIN APPROACH: UNI EN ISO 22005:2008 VOLUNTARY CERTIFICATION

    Directory of Open Access Journals (Sweden)

    E. Guidi

    2011-01-01

    Full Text Available This work summarize an experience of auditing according to new UNI EN ISO 22005:2008. This new food chain certification scheme, arisen from two different European schemes of internal and external traceability certification, requires companies to build up their own check plans considering all components in food chain processing. This new approach, also derived from the European legislation, wants to verify if traceability system is under control and to verify if corrective actions to warrant hygienic production standards are built up.

  2. Introduction to ISO 15189: a blueprint for quality systems in veterinary laboratories.

    Science.gov (United States)

    Freeman, Kathleen P; Bauer, Natali; Jensen, Asger L; Thoresen, Stein

    2006-06-01

    A trend in human and veterinary medical laboratory management is to achieve accreditation based on international standards. The International Organization for Standardization (ISO) 15189 standard is the first developed especially for accreditation of medical laboratories, and emphasizes the laboratory-client interface. European veterinary laboratories seeking to train candidates for the certification examination of the European College of Veterinary Clinical Pathology (ECVCP) require approval by the ECVCP Laboratory Standards Committee, which bases its evaluation in part on adherence to quality systems described in the ISO 15189 standards. The purpose of this article was to introduce the latest ISO quality standard and describe its application to veterinary laboratories in Europe, specifically as pertains to accreditation of laboratories involved in training veterinary clinical pathologists. Between 2003 and 2006, the Laboratory Standards Committee reviewed 12 applications from laboratories (3 commercial and 9 university) involved in training veterinary clinical pathologists. Applicants were asked to provide a description of the facilities for training and testing, current methodology and technology, health and safety policy, quality assurance policy (including internal quality control and participation in an external quality assurance program), written standard operating procedures (SOPs) and policies, a description of the laboratory information system, and personnel and training. Also during this time period multiple informal and formal discussions among ECVCP diplomates took place as to current practices and perceived areas of concern with regard to laboratory accreditation requirements. Areas in which improvement most often was needed in veterinary laboratories applying for ECVCP accreditation were the written quality plan, defined quality requirements for the tests performed, written SOPs and policies, training records, ongoing audits and competency

  3. Large area inkjet printing for organic photovoltaics and organic light emitting diodes using non-halogenated ink formulations

    NARCIS (Netherlands)

    Eggenhuisen, T.M.; Coenen, M.J.J.; Slaats, M.W.L.; Groen, W.A.

    2014-01-01

    The transfer of laboratory scale solution processing of organic electronics to large area roll-to-roll production requires the use of up-scalable deposition techniques. Furthermore, industrial production demands the omission of halogenated and other harmful solvents. Here, the authors discuss large

  4. A direct thin-film path towards low-cost large-area III-V photovoltaics

    National Research Council Canada - National Science Library

    Kapadia, Rehan; Yu, Zhibin; Wang, Hsin-Hua H; Zheng, Maxwell; Battaglia, Corsin; Hettick, Mark; Kiriya, Daisuke; Takei, Kuniharu; Lobaccaro, Peter; Beeman, Jeffrey W; Ager, Joel W; Maboudian, Roya; Chrzan, Daryl C; Javey, Ali

    2013-01-01

    ...). Here, we demonstrate the first vapor-liquid-solid (VLS) growth of high-quality III-V thin-films on metal foils as a promising platform for large-area terrestrial PVs overcoming the above obstacles. We demonstrate 1-3 μ...

  5. Photocurrent enhancement by surface plasmon resonance of gold nanoparticles in spray deposited large area dye sensitized solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Chander, Nikhil; Singh, Puneet [Photovoltaic Laboratory, Centre for Energy Studies, Indian Institute of Technology Delhi, New Delhi 110016 (India); Khan, A.F. [Department of Electronics and Information Technology, Ministry of Communications and Information Technology, Government of India, New Delhi 110003 (India); Dutta, Viresh [Photovoltaic Laboratory, Centre for Energy Studies, Indian Institute of Technology Delhi, New Delhi 110016 (India); Komarala, Vamsi K., E-mail: vamsi@ces.iitd.ac.in [Photovoltaic Laboratory, Centre for Energy Studies, Indian Institute of Technology Delhi, New Delhi 110016 (India)

    2014-10-01

    A facile method for fabricating large area TiO{sub 2} and TiO{sub 2}–Au nanocomposite films for dye sensitized solar cells (DSSCs) is presented using a spray technique. Pre-synthesized gold nanoparticles (Au NPs) were sprayed together with the TiO{sub 2} NPs and composite films with brilliant coloration due to surface plasmon resonances of Au NPs were prepared. Composite films containing ∼ 15 nm sized Au NPs exhibited enhanced absorption in the visible region of the electromagnetic spectrum. DSSCs with a large area of ∼ 4.5 cm{sup 2} were fabricated and a photocurrent enhancement of ∼ 10% was obtained for plasmonic DSSC containing 0.3 wt.% of ∼ 15 nm Au NPs. Incident photon to current conversion efficiency data conclusively showed enhanced currents in the visible region of the polychromatic spectrum arising due to plasmon enhanced near-field effects of Au NPs around the absorbing dye molecules. - Highlights: • Preparation of TiO{sub 2} and TiO{sub 2}–Au films with a large area of ∼ 7.5 cm{sup 2} by a spray technique • An efficiency of ∼ 4.5% achieved by the large area plasmonic DSSC • Photocurrent enhancement due to SPR effects of gold NPs observed • Comparison of the spray and conventional doctor blade methods in DSSC performance • Demonstration of technological feasibility and versatility of a simple spray process.

  6. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Gevorgyan, Suren; Gholamkhass, Bobak

    2009-01-01

    A round robin for the performance of roll-to-roll coated flexible large-area polymer solar-cell modules involving 18 different laboratories in Northern America, Europe and Middle East is presented. The study involved the performance measurement of the devices at one location (Risø DTU) followed b...

  7. Roll-coating fabrication of flexible large area small molecule solar cells with power conversion efficiency exceeding 1%

    DEFF Research Database (Denmark)

    Liu, Wenqing; Liu, Shiyong; Zawacka, Natalia Klaudia

    2014-01-01

    All solution-processed flexible large area small molecule bulk heterojunction solar cells were fabricated via roll-coating technology. Our devices were produced from slot-die coating on a lab-scale mini roll-coater under ambient conditions without the use of spin-coating or vacuum evaporation...

  8. Discovery of Nine Gamma-Ray Pulsars in Fermi Large Area Telescope Data Using a New Blind Search Method

    NARCIS (Netherlands)

    Pletsch, H.J.; Guillemot, L.; Allen, B.; Kramer, M.; Aulbert, C.; Fehrmann, H.; Ray, P.S.; Barr, E.D.; Belfiore, A.; Camilo, F.; Caraveo, P.A.; Çelik, O.; Champion, D.J.; Dormody, M.; Eatough, R.P.; Ferrara, E.C.; Freire, P.C.C.; Hessels, J.W.T.; Keith, M.; Kerr, M.; De Luca, A.; Lyne, A.G.; Marelli, M.; McLaughlin, M.A.; Parent, D.; Ransom, S.M.; Razzano, M.; Reich, W.; Saz Parkinson, P.M.; Stappers, B.W.; Wolff, M.T.

    2012-01-01

    We report the discovery of nine previously unknown gamma-ray pulsars in a blind search of data from the Fermi Large Area Telescope (LAT). The pulsars were found with a novel hierarchical search method originally developed for detecting continuous gravitational waves from rapidly rotating neutron

  9. An Indium-Free Anode for Large-Area Flexible OLEDs: Defect-Free Transparent Conductive Zinc Tin Oxide

    NARCIS (Netherlands)

    Morales-Masis, M.; Dauzou, F.; Jeangros, Q.; Dabirian, A.; Lifka, H.; Gierth, R.; Ruske, M.; Moet, D.; Hessler-Wyser, A.; Ballif, C.

    2016-01-01

    Flexible large-area organic light-emitting diodes (OLEDs) require highly conductive and transparent anodes for efficient and uniform light emission. Tin-doped indium oxide (ITO) is the standard anode in industry. However, due to the scarcity of indium, alternative anodes that eliminate its use are

  10. Transforming the Land Administration Domain Model (LADM) into an ISO Standard (ISO19152)

    OpenAIRE

    C. H. J. Lemmen; van Oosterom, P.J.M.; Uitermark, H.T.; Thompson, R.J.; Hespanha, J.P.

    2009-01-01

    In February 2008, FIG submitted the Land Administration Domain Model (LADM) to the International Organization for Standardization (ISO). After three meetings with the LADM/ISO19152 Project Team (in Copenhagen, Denmark, May 2008; in Delft, The Netherlands, September 2008; and in Tsukuba, Japan, December 2008) we are now preparing a Committee Draft (CD), the next stage in the development process of an International Standard.

  11. Implementation of ISO 50001 Energy Management System in Sports Stadia

    National Research Council Canada - National Science Library

    Aidan Byrne; Martin Barrett; Richard Kelly

    2014-01-01

    ... Stadium’s recent implementation of the ISO 50001 Energy Management System. The authors identify the potential challenges and benefits of implementing the ISO 50001 Energy Management System in sports stadia...

  12. Integrative Augmentation with the New ISO 10000 Standards1

    Directory of Open Access Journals (Sweden)

    Karapetrovic Stanislav

    2014-11-01

    Full Text Available Application and integration of the systems based on ISO 10001: 2007 and other new augmentative standards are discussed. Particular attention is paid to the quality management standards forming the front end of the ISO 10000 series, namely ISO 10001, ISO 10002 and ISO 10003, as well as ISO 19011, the standard which stems from the original augmentative ISO 10000 guideline, specifically ISO 10011 on quality auditing. The ability of these and other similar standards to augment the performance of quality management systems in organizations and to foster integration of the respective augmentative systems themselves or within the overarching management systems is addressed and further illustrated through an example of their use in engineering education.

  13. An introduction to information security and ISO27001:2013

    CERN Document Server

    Watkins, Steve

    2013-01-01

    Up to date with the latest version of the Standard (ISO27001:2013), An Introduction to information security and ISO27001:2013 is the perfect solution for anyone wanting an accurate, fast, easy-to-read primer on information security from an acknowledged expert on ISO27001.

  14. The Relationship between the Training Function and ISO-9000 Registration.

    Science.gov (United States)

    Maxwell, Randy C.; Jost, Karen L.

    ISO 9000 is one of a series of international standards providing guidelines and governing quality of products and services. The ISO 9000 certification demonstrates the capability of a supplier to control the processes that determine the acceptability of the product or service being supplied. This paper focuses on the training aspects of ISO 9000…

  15. ENERGY MANAGEMENT SYSTEMS AND ISO 50001 ACCREDITATION IN SHIPPING

    Directory of Open Access Journals (Sweden)

    BRANISLAV DRAGOVIŠ

    2017-12-01

    Full Text Available The shipping sector is facing new challenges in energy consumption and management. In a recent study conducted by the European Sea Ports Organization (ESPO has shown that energy consumption has risen from 7th place in 2009, to 2nd in 2016, as far as the 10 environmental priorities of European ports. Energy management is seen as the greatest risk for shipping companies, due to the variability existing in the oil and gas markets, in recent decades. Unsuccessful energy management strategies have been shown to have serious consequences for the natural environment, as well as for the companies themselves, which include the enhancement of global warming, and the destruction of a positive corporate image/reputation. Due to this, shipping companies now consider energy as an integral part of their overall strategy and adopt risk management assessments in order to attain the best returns on their investments. The ISO 50001 standard provides a useful tool to companies that are eager to develop and apply an efficient energy strategy consistent with modern Social Corporate Responsibility requirements and aspirations.

  16. Promoting Strong ISO 50001 Outcomes with Supportive National Infrastructure

    Energy Technology Data Exchange (ETDEWEB)

    McKane, Aimee, T.; Siciliano, Graziella; de los Reyes, Pamela

    2015-08-04

    The ISO 50001 standard is a key mechanism for reducing greenhouse gas emissions and improving energy efficiency globally. An increasing number of companies are seeking certification, creating the need for personnel that are competent to conduct ISO 50001 certification audits. The growth of ISO 50001 is expected to accelerate as more companies integrate ISO 50001 into their corporate sustainability strategies and supplier requirements. Robust implementation of ISO 50001 represents an important tool for countries with climate change mitigation goals. Because of its dual focus on continual improvement of an organization’s energy management system (EnMS) and its energy performance improvement, ISO 50001 requires skills of both implementers and certification auditors that are not well-supported by current credentials and training. This paper describes an effort to address skill gaps of certification auditors, a critical factor to ensure that ISO 50001 implementations are robust and result in continued energy performance improvement. A collaboration of governments through the Energy Management Working Group (EMWG), formerly under Global Superior Energy Performance (GSEP), has formed to build workforce capacity for ISO 50001 certification audits. The EMWG is leading the development of an internationally-relevant certification scheme for ISO 50001 Lead Auditor that meets requirements for ISO/IEC 17024 accreditation and ISO 50003 for defining ISO 50001 Lead Auditor competency. Wider availability of competent ISO 50001 Lead Auditors will ultimately increase the impact and market value of ISO 50001 certification and improve consistency of ISO 50001 certification outcomes by establishing a standardized and high level of knowledge and skills globally.

  17. Incorporating ISO Metadata Using HDF Product Designer

    Science.gov (United States)

    Jelenak, Aleksandar; Kozimor, John; Habermann, Ted

    2016-01-01

    The need to store in HDF5 files increasing amounts of metadata of various complexity is greatly overcoming the capabilities of the Earth science metadata conventions currently in use. Data producers until now did not have much choice but to come up with ad hoc solutions to this challenge. Such solutions, in turn, pose a wide range of issues for data managers, distributors, and, ultimately, data users. The HDF Group is experimenting on a novel approach of using ISO 19115 metadata objects as a catch-all container for all the metadata that cannot be fitted into the current Earth science data conventions. This presentation will showcase how the HDF Product Designer software can be utilized to help data producers include various ISO metadata objects in their products.

  18. ISO 14000: Origin, Structure, and Potential Barriers to Implementation.

    Science.gov (United States)

    Casto; Ellisen; Trnovec; Kross; Ginter

    1996-04-01

    The ISO 14000 is likely to become the international standard for environmental management. At present, it is an evolving series of individual voluntary standards and guideline reference documents that provide business management with the structure for managing environmental impacts. These encompass environmental management systems, environmental audits, eco-labeling, environmental performance evaluations, life-cycle assessment, and environmental aspects in product standards. The authors present the rationale for the ISO 14000 and the steps in its evolution so far, as well as its present provisions and their implications and its position with regard to regulatory agencies. Particular attention is paid to the consequences of voluntary disclosure and correction of violations. Hanley & Belfus, Inc. Int J Occup Environ Health 1077-3525 2 2 1996 April/June Perspectives on Rural Environmental Health in Central Europe 125 134 EN Tomas Trnovec Burton C. Kross CIREH-Room 352, International Center, University of Iowa, Iowa City, IA 52242, USA. Emil Ginter Life expectancy is about five to seven years less in Central European countries than in comparable countries in Western Europe. Environmental and occupational health risk factors, along with the socioeconomic and political conditions that have prevailed in this region for the past 40 years, are suspected contributing factors to this condition. The initial impression among observers was that environmental pollution by industry was the primary source of contamination leading to human health effects. Current thinking by the authors recognizes that combinations of personal habits, local environmental emissions (home heating), and occupational risk factors are more likely to be influencing the health of this region, particularly in rural areas. A predictive model for standard mortality rates determined that only three potential risk factors were statistically significant: consumption of alcoholic beverages, consumption of citrus

  19. ISO 9000: 2000: towards a learning organization ?

    Directory of Open Access Journals (Sweden)

    Michel DOMENC

    2009-01-01

    Full Text Available The 2000 version of ISO 9000 contains major changes compared to the 1994 version. We hypothesize that the changes it induces are in line of research applying the emergence of a new "model" organization. From a field survey among actors involved in implementing the new standard, the research presented examines changes recorded in terms of spaces of communication and cooperation, competence, shared responsibilities. These changes involved the development of a learning organization.

  20. Revision of ISO 15859 Aerospace Fluid Standards

    Science.gov (United States)

    Greene, Benjamin; McClure, Mark B.

    2012-01-01

    A detailed review of ISO 15859 "Space Systems - Fluid Characteristics, Sampling and Test Methods" was performed An approach to revising Parts 1-9 and 11-13 was developed and concurred by the NASA Technical Standards Program Office. The approach was to align them with the highest level source documents, and not to program-specific requirements. The updated documents were prepared and presented.

  1. [Current status of ISO 15189 accreditation system].

    Science.gov (United States)

    Watanabe, Kiyoaki; Kubono, Katsuo; Shimoda, Katsuji

    2012-07-01

    The Japan Accreditation Board (JAB) mainly involves the ISO 15189 accreditation system with support from the Japanese Committee for Clinical Laboratory Standards (JCCLS). The currently available procedure to obtain accreditation is as below. Firstly, it is necessary for applicants to prepare ISO 15189 and related documents in each laboratory. Then a JAB assessor will conduct a preliminary assessment to check if the applicant is ready to be accredited. Subsequently, a team consisting of one to five JAB assessors and/or technical experts will conduct the initial assessment, usually for two days. Finally, the team will make a recommendation to the JAB Accreditation Committee for Medical Laboratory on its evaluation for accreditation. If the Accreditation Committee approves the recommendation of the assessment team, the applicant will be granted accreditation and issued with a certificate of accreditation. According to EU data in February 2011, about 1,300 medical laboratories obtained the ISO 15189 accreditation. The numbers of accredited laboratories are 482 in Germany, 276 in England, 209 in France, 100 in Czechoslovakia etc. Similarly, the data for the Asia-Pacific region in June 2011 showed that the numbers of accredited laboratories are 638 in Australia, 287 in India, 220 in Canada, 160 in Taiwan etc. Although 59 laboratories are accredited in Japan, the ISO 15189 accreditation is not so widespread compared with other countries. It is now expected that the government and/or related bodies will have sufficient understanding of this accreditation system to further its development in Japan. [Rinsho Byori 60: 653-659, 2012

  2. ISO 55000: Creating an asset management system.

    Science.gov (United States)

    Bradley, Chris; Main, Kevin

    2015-02-01

    In the October 2014 issue of HEJ, Keith Hamer, group vice-president, Asset Management & Engineering at Sodexo, and marketing director at Asset Wisdom, Kevin Main, argued that the new ISO 55000 standards present facilities managers with an opportunity to create 'a joined-up, whole lifecycle approach' to managing and delivering value from assets. In this article, Kevin Main and Chris Bradley, who runs various asset management projects, examine the process of creating an asset management system.

  3. Monitoring the process of pulmonary melanoma metastasis using large area and label-free nonlinear optical microscopy

    Science.gov (United States)

    Hua, Daozhu; Qi, Shuhong; Li, Hui; Zhang, Zhihong; Fu, Ling

    2012-06-01

    We performed large area nonlinear optical microscopy (NOM) for label-free monitoring of the process of pulmonary melanoma metastasis ex vivo with subcellular resolution in C57BL/6 mice. Multiphoton autofluorescence (MAF) and second harmonic generation (SHG) images of lung tissue are obtained in a volume of ~2.2 mm×2.2 mm×30 μm. Qualitative differences in morphologic features and quantitative measurement of pathological lung tissues at different time points are characterized. We find that combined with morphological features, the quantitative parameters, such as the intensity ratio of MAF and SHG between pathological tissue and normal tissue and the MAF to SHG index versus depth clearly shows the tissue physiological changes during the process of pulmonary melanoma metastasis. Our results demonstrate that large area NOM succeeds in monitoring the process of pulmonary melanoma metastasis, which can provide a powerful tool for the research in tumor pathophysiology and therapy evaluation.

  4. Research Update: Large-area deposition, coating, printing, and processing techniques for the upscaling of perovskite solar cell technology

    Directory of Open Access Journals (Sweden)

    Stefano Razza

    2016-09-01

    Full Text Available To bring perovskite solar cells to the industrial world, performance must be maintained at the photovoltaic module scale. Here we present large-area manufacturing and processing options applicable to large-area cells and modules. Printing and coating techniques, such as blade coating, slot-die coating, spray coating, screen printing, inkjet printing, and gravure printing (as alternatives to spin coating, as well as vacuum or vapor based deposition and laser patterning techniques are being developed for an effective scale-up of the technology. The latter also enables the manufacture of solar modules on flexible substrates, an option beneficial for many applications and for roll-to-roll production.

  5. Large-area formation of self-aligned crystalline domains of organic semiconductors on transistor channels using CONNECT

    Science.gov (United States)

    Park, Steve; Giri, Gaurav; Shaw, Leo; Pitner, Gregory; Ha, Jewook; Koo, Ja Hoon; Gu, Xiaodan; Park, Joonsuk; Lee, Tae Hoon; Nam, Ji Hyun; Hong, Yongtaek; Bao, Zhenan

    2015-01-01

    The electronic properties of solution-processable small-molecule organic semiconductors (OSCs) have rapidly improved in recent years, rendering them highly promising for various low-cost large-area electronic applications. However, practical applications of organic electronics require patterned and precisely registered OSC films within the transistor channel region with uniform electrical properties over a large area, a task that remains a significant challenge. Here, we present a technique termed “controlled OSC nucleation and extension for circuits” (CONNECT), which uses differential surface energy and solution shearing to simultaneously generate patterned and precisely registered OSC thin films within the channel region and with aligned crystalline domains, resulting in low device-to-device variability. We have fabricated transistor density as high as 840 dpi, with a yield of 99%. We have successfully built various logic gates and a 2-bit half-adder circuit, demonstrating the practical applicability of our technique for large-scale circuit fabrication. PMID:25902502

  6. ISO, unique explorer of the invisible cool universe

    Science.gov (United States)

    1995-10-01

    paper which if placed end-to-end could cover the 7000 km between Paris and Miami. Observing time is already oversubscribed. Even before the satellite has actually come into service, ESA has received proposals from European, American and Japanese scientists amounting to 60 000 requests for utilisation - demand four times in excess of the possible supply under this mission. Martin Kessler, ESA's project scientist, explains: "ISO will explore a cool, hidden universe inaccessible to conventional optical telescopes. " For example, astronomers will be able to observe lower-temperature stars not observable in the visible or stars hidden by clouds of gas and dust that only infrared light can penetrate. "The telescope will be able to pick out new-born cold stars taking shape among the bright stars of the galaxy. Intensive study of such stars will enhance our understanding of the overall process whereby they - and hence the sun itself - came into existence. " To begin with, ISO will take the first cool look at nearby planets, satellites, asteroids and comets in our solar. system. It will pay particular attention to Titan, Saturn's intriguing hazy moon (due to be explored by ESA's Huygens probe in 2004). Astronomers suspect that its atmosphere is host to complex organic chemical processes which may be similar to those allowing the emergence of life on Earth. ISO will take precise measurements of the composition of this atmosphere and ascertain the abundance of its minority chemical species and variation with altitude, well before Huygens actually delves into Titan's gassy surroundings and probes them directly. Is there a similar planetary system elsewhere in the galaxy? The answer to this huge question has a key bearing on any possibility of detecting life forms outside the solar system. ISO will endeavour to provide an answer by examining disks of dust around several hundred stars of varying types, near and far, young and evolved. It is within just such disks that the planets of

  7. ISO TC211 standards on Provenance for Earth science

    Science.gov (United States)

    Di, L.; Deng, M.

    2014-12-01

    Data provenance, also called lineage, records the derivation history of a data product. The history could include the algorithms used, the process steps taken, the computing environment run, data sources input to the processes, the organization/person responsible for the product, etc. Provenance provides important information to data users for them to determine the usability and reliability of the product. In the science domain, the data provenance is especially important since scientists need to use the information to determine the scientific validity of a data product and to decide if such a product can be used as the basis for further scientific analysis. Provenance is a kind of metadata. In Earth science domain, the International Organization for Standardization (ISO) Technical Committee 211 (ISO TC 211) have set geospatial metadata standards for geospatial data, including ISO 19115:2003-Metadata, ISO 19115-2:2009-Metadata-Part 2: Extensions for imagery and gridded data, and ISO 19115-1:2014 - Metadata -- Part 1: Fundamentals. ISO 19115 and ISO 19115-1 define the fundamental metadata for documenting geospatial data products, and ISO 19115-2 provides additional metadata classes for imagery and gridded data. ISO 19115-1:2014 is the revised version of ISO 19115:2003. ISO 19115 and ISO 19115-1 define fundamental lineage information classes and subclasses. They miss some key information classes needed for documenting the provenance in the Web service environment, such as the running environment, the algorithms, and software executables. However, ISO 19115-2 extends the lineage model in ISO 19115 and provides additional metadata classes needed for documenting provenance information. The combination of lineage models in ISO 19115 and ISO 19115-2 provides a comprehensive provenance information model needed for the web service environment. Currently the ISO Provence standard is not compatible with W3C Prov standard. The revision of ISO 19115-2 will be started in

  8. Solution processed large area fabrication of Ag patterns as electrodes for flexible heaters, electrochromics and organic solar cells

    DEFF Research Database (Denmark)

    Gupta, Ritu; Walia, Sunil; Hösel, Markus

    2014-01-01

    A simple method for producing patterned Ag electrodes on transparent and flexible substrates is reported. The process makes use of laser printed toner as a sacrificial template for an organic precursor, which upon thermolysis and toner lift off produced highly conducting Ag electrodes. Thus, the ...... solar cells have been demonstrated. The method is extendable to produce defect-free patterns over large areas as demonstrated by roll coating....

  9. Hyperspatial and Multi-Source Water Body Mapping: A Framework to Handle Heterogeneities from Observations and Targets over Large Areas

    Directory of Open Access Journals (Sweden)

    Raphaël d’Andrimont

    2017-02-01

    Full Text Available Recent advances in remote sensing technologies and the cost reduction of surveying, along with the importance of natural resources management, present new opportunities for mapping land cover at a very high resolution over large areas. This paper proposes and applies a framework to update hyperspatial resolution (<1 m land thematic mapping over large areas by handling multi-source and heterogeneous data. This framework deals with heterogeneity both from observation and the targeted features. First, observation diversity comes from the different platform and sensor types (25-cm passive optical and 1-m LiDAR as well as the different instruments (three cameras and two LiDARs used in heterogeneous observation conditions (date, time, and sun angle. Second, the local heterogeneity of the targeted features results from their within-type diversity and neighborhood effects. This framework is applied to surface water bodies in the southern part of Belgium (17,000 km2. This makes it possible to handle both observation and landscape contextual heterogeneity by mapping observation conditions, stratifying spatially and applying ad hoc classification procedures. The proposed framework detects 83% of the water bodies—if swimming pools are not taken into account—and more than 98% of those water bodies greater than 100 m2, with an edge accuracy below 1 m over large areas.

  10. A Novel and Facile Route to Synthesize Atomic-Layered MoS2 Film for Large-Area Electronics.

    Science.gov (United States)

    Boandoh, Stephen; Choi, Soo Ho; Park, Ji-Hoon; Park, So Young; Bang, Seungho; Jeong, Mun Seok; Lee, Joo Song; Kim, Hyeong Jin; Yang, Woochul; Choi, Jae-Young; Kim, Soo Min; Kim, Ki Kang

    2017-10-01

    High-quality and large-area molybdenum disulfide (MoS2 ) thin film is highly desirable for applications in large-area electronics. However, there remains a challenge in attaining MoS2 film of reasonable crystallinity due to the absence of appropriate choice and control of precursors, as well as choice of suitable growth substrates. Herein, a novel and facile route is reported for synthesizing few-layered MoS2 film with new precursors via chemical vapor deposition. Prior to growth, an aqueous solution of sodium molybdate as the molybdenum precursor is spun onto the growth substrate and dimethyl disulfide as the liquid sulfur precursor is supplied with a bubbling system during growth. To supplement the limiting effect of Mo (sodium molybdate), a supplementary Mo is supplied by dissolving molybdenum hexacarbonyl (Mo(CO)6 ) in the liquid sulfur precursor delivered by the bubbler. By precisely controlling the amounts of precursors and hydrogen flow, full coverage of MoS2 film is readily achievable in 20 min. Large-area MoS2 field effect transistors (FETs) fabricated with a conventional photolithography have a carrier mobility as high as 18.9 cm(2) V(-1) s(-1) , which is the highest reported for bottom-gated MoS2 -FETs fabricated via photolithography with an on/off ratio of ≈10(5) at room temperature. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Macroscopic and high-throughput printing of aligned nanostructured polymer semiconductors for MHz large-area electronics

    Science.gov (United States)

    Bucella, Sadir G.; Luzio, Alessandro; Gann, Eliot; Thomsen, Lars; McNeill, Christopher R.; Pace, Giuseppina; Perinot, Andrea; Chen, Zhihua; Facchetti, Antonio; Caironi, Mario

    2015-09-01

    High-mobility semiconducting polymers offer the opportunity to develop flexible and large-area electronics for several applications, including wearable, portable and distributed sensors, monitoring and actuating devices. An enabler of this technology is a scalable printing process achieving uniform electrical performances over large area. As opposed to the deposition of highly crystalline films, orientational alignment of polymer chains, albeit commonly achieved by non-scalable/slow bulk alignment schemes, is a more robust approach towards large-area electronics. By combining pre-aggregating solvents for formulating the semiconductor and by adopting a room temperature wired bar-coating technique, here we demonstrate the fast deposition of submonolayers and nanostructured films of a model electron-transporting polymer. Our approach enables directional self-assembling of polymer chains exhibiting large transport anisotropy and a mobility up to 6.4 cm2 V-1 s-1, allowing very simple device architectures to operate at 3.3 MHz. Thus, the proposed deposition strategy is exceptionally promising for mass manufacturing of high-performance polymer circuits.

  12. Application of CBD-Zinc Sulfide Film as an Antireflection Coating on Very Large Area Multicrystalline Silicon Solar Cell

    Directory of Open Access Journals (Sweden)

    J. Yi

    2008-03-01

    Full Text Available The low-cost chemical bath deposition (CBD technique is used to prepare CBD-ZnS films as antireflective (AR coating for multicrystalline silicon solar cells. The uniformity of CBD-ZnS film on large area of textured multicrystalline silicon surface is the major challenge of CBD technique. In the present work, attempts have been made for the first time to improve the rate of deposition and uniformity of deposited film by controlling film stoichiometry and refractive index and also to minimize reflection loss by proper optimization of molar percentage of different chemical constituents and deposition conditions. Reasonable values of film deposition rate (12.13 Å′/min., good film uniformity (standard deviation <1, and refractive index (2.35 along with a low percentage of average reflection (6-7% on a textured mc-Si surface are achieved with proper optimization of ZnS bath. 12.24% efficiency on large area (125 mm × 125 mm multicrystalline silicon solar cells with CBD-ZnS antireflection coating has been successfully fabricated. The viability of low-cost CBD-ZnS antireflection coating on large area multicrystalline silicon solar cell in the industrial production level is emphasized.

  13. A primary standard for the measurement of alpha and beta particle surface emission rate from large area reference sources.

    Science.gov (United States)

    Ravindra, Anuradha; Kulkarni, D B; Joseph, Leena; Kulkarni, M S; Babu, D A R

    2016-01-01

    A large area windowless gas flow multi wire proportional counting system for the calibration of large area reference sources has been developed as a primary standard at Bhabha Atomic Research Centre (BARC). The counting system consists of a multi wire proportional counter (MWPC), vacuum system, gas flow system and pulse processing units. The MWPC detector assembly consists of a vacuum tight aluminum enclosure, multi wire grid and sliding source tray. Various detector characteristics like operating characteristics curve, Fe-55 spectrum for beta discriminator threshold setting and dead time of the measurement system were studied and determined in order to achieve an optimized detection capability. The surface emission rates of different source strengths were measured and their relative combined standard uncertainties were determined. Large Area Sources Comparison Exercise (LASCE) was organized by International Committee on Radionuclide Metrology (ICRM) working group and coordinated by National Institute for Ionising Radiation Metrology (ENEA), Italy, to demonstrate equivalence of surface emission rate measurements at the international platform. BARC participated in the programme and the results of LASCE are also discussed in this paper. Copyright © 2015 Elsevier Ltd. All rights reserved.

  14. Scalability and stability of very thin roll-to-roll processed large area indium-tin-oxide free polymer solar cell modules

    DEFF Research Database (Denmark)

    Angmo, Dechan; Gevorgyan, Suren; Larsen-Olsen, Thue Trofod

    2013-01-01

    Polymer solar cell modules were prepared directly on thin flexible barrier polyethylene terephthalate foil. The performance of the modules was found to be scalable from a single cell with an area of 6 cm2 to modules with a total area of up to 186 cm2. The substrate thickness was also explored...... (ISOS-D-2), under low light (ISOS-LL), under full sunlight (ISOS-L-2), and under outdoor testing (ISOS-O), which was conducted in two locations in India and Denmark. We estimate maximum T80 for those tests to be 2800, 5000, 1300, 1000, and 3500 h respectively. The modules showed significant sensitivity...

  15. The ISO/EN 13606 Standard for the Interoperable Exchange of Electronic Health Records

    Directory of Open Access Journals (Sweden)

    Pilar Muñoz

    2011-01-01

    Full Text Available The standardization of Electronic Health Records (EHR is a crucial factor for ensuring interoperable sharing of health data. During recent decades, a plethora of initiatives - driven by international organizations - has emerged to define the required models describing the exchange of information between EHRs. These models cover different essential characteristics for building interoperable EHRs, such as architecture, methodology, communication, safety or terminology, among others. In this context, the European reference frame for the standardized exchange of EHR is the recently approved ISO/EN 13606 standard. This multi-part standard provides the syntactic and semantic capabilities (through a dual model approach as well as terminology, security and interface considerations for the standardized exchange of EHR. This paper provides (a an introduction to the different standardization efforts related to the interoperable exchange of EHR around the world, and (b a description of how the ISO/EN 13606 standard provides interoperable sharing of clinical information.

  16. Acoustic classification of housing according to ISO/CD 19488 compared with VDI 4100 and DEGA Recommendation 103

    DEFF Research Database (Denmark)

    Rasmussen, Birgit

    2017-01-01

    and for further development of design tools. Due to the high diversity in Europe, the European COST Action TU0901 ”Integrating and Harmonizing Sound Insulation Aspects in Sustainable Urban Housing Constructions” was established in 2009 with preparation of a proposal for an acoustic classification scheme......In Europe, national acoustic classification schemes for housing exist in about ten countries. The schemes specify a number of quality classes, reflecting different levels of acoustic protection, and include class criteria concerning several acoustic aspects, main criteria being about airborne...... for housing as one of the main goals. The proposal - based on studies of existing, national schemes and discussions about needs - was approved by ISO/TC43/SC2 as the new work item ISO/WI 19488. A working group was established in 2014, developing further the structure and details. The paper presents ISO/2nd...

  17. Lean principles adoption in environmental management system (EMS - ISO 14001

    Directory of Open Access Journals (Sweden)

    Perumal Puvanasvaran

    2012-12-01

    Full Text Available Purpose: The purpose of this study is to examine the characteristic of the lean principles into ISO 14001 and to propose linkage of the lean principles and ISO 14001.Design/methodology/approach: To achieve the objective of the study, literature survey and quantitative research method using questionnaires survey are used.Findings and Originality/value: The findings of this study confirm that ISO 14001 certified company adopted lean production practices.  The study also proves that lean principles have positive and significant relationship with ISO 14001 EMS and the linkage can be made between lean principles and ISO 14001 to achieve Continual Improvement.Research limitations/implications: The small sizes of the sample of the participating companies are the main limitations of this study and this research mainly focuses on the manufacturing environment and services industry.Practical implications: This research show that all ISO 14001 companies do adopt at least one lean production practices and the main findings are lean principles has positive and highly significant relationship with ISO 14001 requirements.  This is because the integration of lean principles into ISO 14001 will serve practical methods for ISO14001 EMS to achieve the continual improvement.Originality/value: This research is amongst the first to study the combined lean principles with ISO 1400.  Based on the current situation, there is no integration within this two management system. 

  18. ISO 639-1 and ISO 639-2: International Standards for Language Codes. ISO 15924: International Standard for Names of Scripts.

    Science.gov (United States)

    Byrum, John D.

    This paper describes two international standards for the representation of the names of languages. The first (ISO 639-1), published in 1988, provides two-letter codes for 136 languages and was produced primarily to meet terminological needs. The second (ISO 639-2) appeared in late 1998 and includes three-letter codes for 460 languages. This list…

  19. Large-area (over 50 cm × 50 cm) freestanding films of colloidal InP/ZnS quantum dots.

    Science.gov (United States)

    Mutlugun, Evren; Hernandez-Martinez, Pedro Ludwig; Eroglu, Cuneyt; Coskun, Yasemin; Erdem, Talha; Sharma, Vijay K; Unal, Emre; Panda, Subhendu K; Hickey, Stephen G; Gaponik, Nikolai; Eychmüller, Alexander; Demir, Hilmi Volkan

    2012-08-08

    We propose and demonstrate the fabrication of flexible, freestanding films of InP/ZnS quantum dots (QDs) using fatty acid ligands across very large areas (greater than 50 cm × 50 cm), which have been developed for remote phosphor applications in solid-state lighting. Embedded in a poly(methyl methacrylate) matrix, although the formation of stand-alone films using other QDs commonly capped with trioctylphosphine oxide (TOPO) and oleic acid is not efficient, employing myristic acid as ligand in the synthesis of these QDs, which imparts a strongly hydrophobic character to the thin film, enables film formation and ease of removal even on surprisingly large areas, thereby avoiding the need for ligand exchange. When pumped by a blue LED, these Cd-free QD films allow for high color rendering, warm white light generation with a color rendering index of 89.30 and a correlated color temperature of 2298 K. In the composite film, the temperature-dependent emission kinetics and energy transfer dynamics among different-sized InP/ZnS QDs are investigated and a model is proposed. High levels of energy transfer efficiency (up to 80%) and strong donor lifetime modification (from 18 to 4 ns) are achieved. The suppression of the nonradiative channels is observed when the hybrid film is cooled to cryogenic temperatures. The lifetime changes of the donor and acceptor InP/ZnS QDs in the film as a result of the energy transfer are explained well by our theoretical model based on the exciton-exciton interactions among the dots and are in excellent agreement with the experimental results. The understanding of these excitonic interactions is essential to facilitate improvements in the fabrication of photometrically high quality nanophosphors. The ability to make such large-area, flexible, freestanding Cd-free QD films pave the way for environmentally friendly phosphor applications including flexible, surface-emitting light engines.

  20. Measurement of the high-energy gamma-ray emission from the Moon with the Fermi Large Area Telescope

    OpenAIRE

    Ackermann, Markus; Ajello, M.; Bonino, R.; Spinelli, P,; Takahashi, H.; Thayer, J. B.; Thompson, D. J.; Tibaldo, L.; Torres, D. F.; Tosti, G.; Troja, E; Vianello, G.; Winer, B. l.; Bottacini, E.; Wood, K. S.

    2016-01-01

    We have measured the gamma-ray emission spectrum of the Moon using the data collected by the Large Area Telescope onboard the Fermi satellite during its first seven years of operation, in the energy range from 30 MeV up to a few GeV. We have also studied the time evolution of the flux, finding a correlation with the solar activity. We have developed a full Monte Carlo simulation describing the interactions of cosmic rays with the lunar surface. The results of the present analysis can be expla...

  1. Spatially Explicit Large Area Biomass Estimation: Three Approaches Using Forest Inventory and Remotely Sensed Imagery in a GIS.

    Science.gov (United States)

    Wulder, Michael A; White, Joanne C; Fournier, Richard A; Luther, Joan E; Magnussen, Steen

    2008-01-24

    Forest inventory data often provide the required base data to enable the largearea mapping of biomass over a range of scales. However, spatially explicit estimates ofabove-ground biomass (AGB) over large areas may be limited by the spatial extent of theforest inventory relative to the area of interest (i.e., inventories not spatially exhaustive), orby the omission of inventory attributes required for biomass estimation. These spatial andattributional gaps in the forest inventory may result in an underestimation of large areaAGB. The continuous nature and synoptic coverage of remotely sensed data have led totheir increased application for AGB estimation over large areas, although the use of thesedata remains challenging in complex forest environments. In this paper, we present anapproach to generating spatially explicit estimates of large area AGB by integrating AGBestimates from multiple data sources; 1. using a lookup table of conversion factors appliedto a non-spatially exhaustive forest inventory dataset (R² = 0.64; RMSE = 16.95 t/ha), 2.applying a lookup table to unique combinations of land cover and vegetation densityoutputs derived from remotely sensed data (R² = 0.52; RMSE = 19.97 t/ha), and 3. hybridmapping by augmenting forest inventory AGB estimates with remotely sensed AGB estimates where there are spatial or attributional gaps in the forest inventory data. Over our714,852 ha study area in central Saskatchewan, Canada, the AGB estimate generated fromthe forest inventory was approximately 40 Mega tonnes (Mt); however, the inventoryestimate represents only 51% of the total study area. The AGB estimate generated from theremotely sensed outputs that overlap those made from the forest inventory based approachdiffer by only 2 %; however in total, the remotely sensed estimate is 30 % greater (58 Mt)than the estimate generated from the forest inventory when the entire study area isaccounted for. Finally, using the hybrid approach, whereby the remotely sensed

  2. A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules

    DEFF Research Database (Denmark)

    Gevorgyan, Suren

    2010-01-01

    A round robin for the performance of roll-to-roll coated flexible large-area polymer solar cell modules involving 18 different laboratories in Northern America, Europe and Middle East is presented. The study involved the performance measurement of the devices at one location (Risø DTU) followed...... by transportation to a participating laboratory for performance measurement and return to the starting location (Risø DTU) for re-measurement of the performance. It was found possible to package polymer solar-cell modules using a flexible plastic barrier material in such a manner that degradation of the devices...

  3. Study on the Preparation Process and Influential Factors of Large Area Environment-friendly Molten Carbonate Fuel Cell Matrix

    Science.gov (United States)

    Zhang, Ruiyun; Xu, Shisen; Cheng, Jian; Wang, Hongjian; Ren, Yongqiang

    2017-07-01

    Low-cost and high-performance matrix materials used in mass production of molten carbonate fuel cell (MCFC) were prepared by automatic casting machine with α-LiAlO2 powder material synthesized by gel-solid method, and distilled water as solvent. The single cell was assembled for generating test, and the good performance of the matrix was verified. The paper analyzed the factors affecting aqueous tape casting matrix preparation, such as solvent content, dispersant content, milling time, blade height and casting machine running speed, providing a solid basis for the mass production of large area environment-friendly matrix used in molten carbonate fuel cell.

  4. Plasmon–Phonon Coupling in Large-Area Graphene Dot and Antidot Arrays Fabricated by Nanosphere Lithography

    DEFF Research Database (Denmark)

    Zhu, Xiaolong; Wang, Weihua; Yan, Wei

    2014-01-01

    Nanostructured graphene on SiO2 substrates paves the way for enhanced light–matter interactions and explorations of strong plasmon–phonon hybridization in the mid-infrared regime. Unprecedented large-area graphene nanodot and antidot optical arrays are fabricated by nanosphere lithography......, with structural control down to the sub-100 nm regime. The interaction between graphene plasmon modes and the substrate phonons is experimentally demonstrated, and structural control is used to map out the hybridization of plasmons and phonons, showing coupling energies of the order 20 meV. Our findings...

  5. Increased levels of the oxidative stress biomarker 8-iso-prostaglandin F2α in wastewater associated with tobacco use

    Science.gov (United States)

    Ryu, Yeonsuk; Gracia-Lor, Emma; Bade, Richard; Baz-Lomba, J. A.; Bramness, Jørgen G.; Castiglioni, Sara; Castrignanò, Erika; Causanilles, Ana; Covaci, Adrian; de Voogt, Pim; Hernandez, Felix; Kasprzyk-Hordern, Barbara; Kinyua, Juliet; McCall, Ann-Kathrin; Ort, Christoph; Plósz, Benedek G.; Ramin, Pedram; Rousis, Nikolaos I.; Reid, Malcolm J.; Thomas, Kevin V.

    2016-12-01

    Wastewater analysis has been demonstrated to be a complementary approach for assessing the overall patterns of drug use by a population while the full potential of wastewater-based epidemiology has yet to be explored. F2-isoprostanes are a prototype wastewater biomarker to study the cumulative oxidative stress at a community level. In this work, 8-iso-prostaglandin F2α (8-iso-PGF2α) was analysed in raw 24 h-composite wastewater samples collected from 4 Norwegian and 7 other European cities in 2014 and 2015. Using the same samples, biomarkers of alcohol (ethyl sulfate) and tobacco (trans-3‧-hydroxycotinine) use were also analysed to investigate any possible correlation between 8-iso-PGF2α and the consumption of the two drugs. The estimated per capita daily loads of 8-iso-PGF2α in the 11 cities ranged between 2.5 and 9.9 mg/day/1000 inhabitants with a population-weighted mean of 4.8 mg/day/1000 inhabitants. There were no temporal trends observed in the levels of 8-iso-PGF2α, however, spatial differences were found at the inter-city level correlating to the degree of urbanisation. The 8-iso-PGF2α mass load was found to be strongly associated with that of trans-3‧-hydroxycotinine while it showed no correlation with ethyl sulfate. The present study shows the potential for 8-iso-PGF2α as a wastewater biomarker for the assessment of community public health.

  6. Printable Nano-Field Effect Transistors Combined with Carbon Nanotube Based Printable Interconnect Wires for Large-Area Deployable Active Phased-Array Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Flexible electronic circuits can be easily integrated with large area (>10m aperture), inflatable antennas to provide distributed control and processing...

  7. A Printable Silicon Nano-Field Effect Transistor with High Operating Frequency for Large-Area Deployable Active Phased-Array Antennas Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Flexible electronic circuits can be easily integrated with large area (>10m aperture), inflatable antennas to provide distributed control and processing...

  8. Sensitivity of the ISO 6579:2002/Amd 1:2007 standard method for detection of Salmonella spp. on mesenteric lymph nodes from slaughter pigs.

    Science.gov (United States)

    Mainar-Jaime, R C; Andrés, S; Vico, J P; San Román, B; Garrido, V; Grilló, M J

    2013-01-01

    The ISO 6579:2002/Amd 1:2007 (ISO) standard has been the bacteriological standard method used in the European Union for the detection of Salmonella spp. in pig mesenteric lymph nodes (MLN), but there are no published estimates of the diagnostic sensitivity (Se) of the method in this matrix. Here, the Se of the ISO (Se(ISO)) was estimated on 675 samples selected from two populations with different Salmonella prevalences (14 farms with a ≥ 20% prevalence and 13 farms with a ISO specificity, and an invA-based PCR as the second diagnostic method. The Se(ISO) was estimated to be close to 87%, while the sensitivity of the PCR reached up to 83.6% and its specificity was 97.4%. Interestingly, the bacteriological reanalysis of 33 potential false-negative (PCR-positive) samples allowed isolation of 19 (57.5%) new Salmonella strains, improving the overall diagnostic accuracy of the bacteriology. Considering the usual limitations of bacteriology regarding Se, these results support the adequacy of the ISO for the detection of Salmonella spp. from MLN and also that of the PCR-based method as an alternative or complementary (screening) test for the diagnosis of pig salmonellosis, particularly considering the cost and time benefits of the molecular procedure.

  9. [Certification according to ISO 9001--waste of time or necessity?].

    Science.gov (United States)

    Metz-Schimmerl, S; Schima, W; Herold, C J

    2002-05-01

    Quality management (QM) systems are widely established management tools in the industry and business world today. In the health care sector, the need for quality, the implementation of quality management systems and economic orientation of the hospital management are strongly encouraged. Centers of excellence are created to offer special medical services of the highest possible quality. Furthermore, there is a worldwide tendency to establish standards in clinical medical settings, in teaching profession and medical science. These trends make the implementation of a quality management system in health care system highly desirable. The present manuscript reviews the fundamental principles and concepts and the aims of internationally accepted QM systems. It focuses on the ISO-9000 certificates and the European Foundation of Quality Management (EFQM) model. The advantages and disadvantages are discussed. The resources necessary for installation of a QM system and the different phases of implementation are reported. According to the experience of several groups, QM systems can be reliably used in a radiology department and lead to continuous improvement of the quality of services.

  10. Catalytic chemical vapor deposition of large-area uniform two-dimensional molybdenum disulfide using sodium chloride

    Science.gov (United States)

    Song, Jeong-Gyu; Ryu, Gyeong Hee; Kim, Youngjun; Woo, Whang Je; Ko, Kyung Yong; Kim, Yongsung; Lee, Changseung; Oh, Il-Kwon; Park, Jusang; Lee, Zonghoon; Kim, Hyungjun

    2017-11-01

    The effective synthesis of atomically thin molybdenum disulfides (MoS2) of high quality and uniformity over a large area is essential for their use in electronic and optical devices. In this work, we synthesize MoS2 that exhibit a high quality and large area uniformity using chemical vapor deposition (CVD) with volatile S organic compound and NaCl catalysts. In the latter process, the NaCl enhances the growth rate (5 min for synthesis of monolayer MoS2) and purity of the synthesized MoS2. The optical microscopy, Raman spectroscopy, x-ray photoemission spectroscopy, photoluminescence, and transmission electron microscopy measurements indicate that the NaCl-CVD MoS2 has a large grain size, clear Raman shift, strong photoluminescence, good stoichiometry, and 6-fold coordination symmetry. Moreover, we demonstrate that the electron mobility (10.4 cm2 V‑1 s‑1) and on/off current ratio (3 × 107) of monolayer MoS2 measured using a field-effect transistor are comparable to those of previously reported MoS2 synthesized using CVD.

  11. In situ synthesis of large-area single sub-10 nm nanoparticle arrays by polymer pen lithography

    Science.gov (United States)

    Wu, Jin; Zan, Xiaoli; Li, Shaozhou; Liu, Yayuan; Cui, Chenlong; Zou, Binghua; Zhang, Weina; Xu, Hongbo; Duan, Hongwei; Tian, Danbi; Huang, Wei; Huo, Fengwei

    2013-12-01

    In order to take advantage of the unique properties of nanoparticles in integrated devices, it is desirable to position monodispersed nanoparticles on substrates with controlled placement. Herein, we utilize small molecules such as ethylene glycol (EG) or glycerol to facilitate the delivery of nanoparticle precursors to the substrates in the polymer pen lithography (PPL) process. Subsequently, large-area ordered single nanoparticle arrays, including sub-10 nm Ag nanoparticle, 30 nm Au nanoparticle and 80 nm Fe2O3 nanoparticle arrays have been synthesized in situ with controllable sizes and pitches.In order to take advantage of the unique properties of nanoparticles in integrated devices, it is desirable to position monodispersed nanoparticles on substrates with controlled placement. Herein, we utilize small molecules such as ethylene glycol (EG) or glycerol to facilitate the delivery of nanoparticle precursors to the substrates in the polymer pen lithography (PPL) process. Subsequently, large-area ordered single nanoparticle arrays, including sub-10 nm Ag nanoparticle, 30 nm Au nanoparticle and 80 nm Fe2O3 nanoparticle arrays have been synthesized in situ with controllable sizes and pitches. Electronic supplementary information (ESI) available: The experiment details, XPS and EDX results of the synthesized nanoparticles. See DOI: 10.1039/c3nr05033e

  12. High-Temperature-Short-Time Annealing Process for High-Performance Large-Area Perovskite Solar Cells.

    Science.gov (United States)

    Kim, Minjin; Kim, Gi-Hwan; Oh, Kyoung Suk; Jo, Yimhyun; Yoon, Hyun; Kim, Ka-Hyun; Lee, Heon; Kim, Jin Young; Kim, Dong Suk

    2017-06-27

    Organic-inorganic hybrid metal halide perovskite solar cells (PSCs) are attracting tremendous research interest due to their high solar-to-electric power conversion efficiency with a high possibility of cost-effective fabrication and certified power conversion efficiency now exceeding 22%. Although many effective methods for their application have been developed over the past decade, their practical transition to large-size devices has been restricted by difficulties in achieving high performance. Here we report on the development of a simple and cost-effective production method with high-temperature and short-time annealing processing to obtain uniform, smooth, and large-size grain domains of perovskite films over large areas. With high-temperature short-time annealing at 400 °C for 4 s, the perovskite film with an average domain size of 1 μm was obtained, which resulted in fast solvent evaporation. Solar cells fabricated using this processing technique had a maximum power conversion efficiency exceeding 20% over a 0.1 cm2 active area and 18% over a 1 cm2 active area. We believe our approach will enable the realization of highly efficient large-area PCSs for practical development with a very simple and short-time procedure. This simple method should lead the field toward the fabrication of uniform large-scale perovskite films, which are necessary for the production of high-efficiency solar cells that may also be applicable to several other material systems for more widespread practical deployment.

  13. Large area multi-channel plasmonic absorber based on the touching triangular dimers fabricated by angle controlled colloidal nanolithography

    Science.gov (United States)

    Hamidi, S. M.; Behjati, S.

    2018-02-01

    Here we introduce large area plasmonic touching triangular dimers by angle controlled colloidal nanolithography to use them as an efficient multi channel absorber and also high figure of merit sensors. For this purpose, we coated gold thin films onto nanometric and also micrometric polystyrene hexagonal closed packed masks in different deposition angles and also diverse substrate polar angles. Our prepared samples, after remove masks, show large area touching triangular pattern with different inter particle distances in greater polar angles. To get more sense about optical response of the samples such as transmittance and also electric field distribution, we use finite difference time domain method in simulation part. The transmittance plot shows one narrow or multi-channel adjustable deep depend on inter-particle distances which can be controlled by azimuthally angle in nano lithography process. Also, due to the isoelliptical points in the transmittance spectra; we can see the bright and dark plasmon modes coupling and thus the Fano like resonance takes place in the optical spectral region which is very useful for refractive index measurement.

  14. Design and Initial Tests of the Tracker-Converter ofthe Gamma-ray Large Area Space Telescope

    Energy Technology Data Exchange (ETDEWEB)

    Atwood, W.B.; Bagagli, R.; Baldini, L.; Bellazzini, R.; Barbiellini, G.; Belli, F.; Borden, T.; Brez, A.; Brigida, M.; Caliandro, G.A.; Cecchi, C.; Cohen-Tanugi, J.; De; Drell, P.; Favuzzi, C.; Fukazawa, Y.; Fusco, P.; Gargano, F.; Germani, S.; Giannitrapani, R.; Giglietto, N.; /UC, Santa Cruz /INFN, Pisa /Pisa U. /INFN, Trieste /INFN,

    2007-04-16

    The Tracker subsystem of the Large Area Telescope (LAT) science instrument of the Gamma-ray Large Area Space Telescope (GLAST) mission has been completed and tested. It is the central detector subsystem of the LAT and serves both to convert an incident gamma-ray into an electron-positron pair and to track the pair in order to measure the gamma-ray direction. It also provides the principal trigger for the LAT. The Tracker uses silicon strip detectors, read out by custom electronics, to detect charged particles. The detectors and electronics are packaged, along with tungsten converter foils, in 16 modular, high-precision carbon-composite structures. It is the largest silicon-strip detector system ever built for launch into space, and its aggressive design emphasizes very low power consumption, passive cooling, low noise, high efficiency, minimal dead area, and a structure that is highly transparent to charged particles. The test program has demonstrated that the system meets or surpasses all of its performance specifications as well as environmental requirements. It is now installed in the completed LAT, which is being prepared for launch in early 2008.

  15. Defect-Free Large-Area (25 cm2 Light Absorbing Perovskite Thin Films Made by Spray Coating

    Directory of Open Access Journals (Sweden)

    Mehran Habibi

    2017-03-01

    Full Text Available In this work, we report on reproducible fabrication of defect-free large-area mixed halide perovskite (CH3NH3PbI3−xClx thin films by scalable spray coating with the area of 25 cm2. This is essential for the commercialization of the perovskite solar cell technology. Using an automated spray coater, the film thickness and roughness were optimized by controlling the solution concentration and substrate temperature. For the first time, the surface tension, contact angle, and viscosity of mixed halide perovskite dissolved in dimethylformamide (DMF are reported as a function of the solution concentration. A low perovskite solution concentration of 10% was selected as an acceptable value to avoid crystallization dewetting. The determined optimum substrate temperature of 150 °C, followed by annealing at 100 °C render the highest perovskite precursor conversion, as well as the highest possible droplet spreading, desired to achieve a continuous thin film. The number of spray passes was also tuned to achieve a fully-covered film, for the condition of the spray nozzle used in this work. This work demonstrates that applying the optimum substrate temperature decreases the standard deviation of the film thickness and roughness, leading to an increase in the quality and reproducibility of the large-area spray-on films. The optimum perovskite solution concentration and the substrate temperature are universally applicable to other spray coating systems.

  16. Direct synthesis of large-area continuous ReS2 films on a flexible glass at low temperature

    Science.gov (United States)

    Kim, Youngchan; Kang, Byunggil; Choi, Yongsuk; Cho, Jeong Ho; Lee, Changgu

    2017-06-01

    Rhenium disulfide (ReS2) has been attracting attentions due to the direct bandgap regardless of the thickness and anisotropic electrical, mechanical and optical properties deriving from its unique crystal lattice structure. In order to utilize these properties, some synthesis methods of ReS2 have been studied for electronic applications. However, their results are not suitable for practical applications because of non-uniformity, discontinuity and difficulty of large-area continuous film growth. Here, we report the synthesis method of layer-controlled wafer-scale (7  ×  2 cm2) ReS2 films by chemical vapor deposition with high uniformity and continuity. Especially, we demonstrate successfully a direct synthesis of ReS2 on a transparent flexible glass substrate at low synthesis temperature (450 °C) without the aid of a catalyst or a plasma enhanced system. The field effect transistors with as-grown ReS2 films on the flexible glass exhibit typical n-type behavior with low threshold voltage of 0.75 V, high on-off ratio of ~105, low subthreshold swing of 260 mV/decade and mobility of 0.13 cm2 V-1 S-1. The direct synthesis of ReS2 films on flexible glass will provide the platform to realize large area transfer-free fabrication of high quality transparent flexible electronic devices.

  17. Role of kinetic factors in chemical vapor deposition synthesis of uniform large area graphene using copper catalyst.

    Science.gov (United States)

    Bhaviripudi, Sreekar; Jia, Xiaoting; Dresselhaus, Mildred S; Kong, Jing

    2010-10-13

    In this article, the role of kinetics, in particular, the pressure of the reaction chamber in the chemical vapor deposition (CVD) synthesis of graphene using low carbon solid solubility catalysts (Cu), on both the large area thickness uniformity and the defect density are presented. Although the thermodynamics of the synthesis system remains the same, based on whether the process is performed at atmospheric pressure (AP), low pressure (LP) (0.1-1 Torr) or under ultrahigh vacuum (UHV) conditions, the kinetics of the growth phenomenon are different, leading to a variation in the uniformity of the resulting graphene growth over large areas (wafer scale). The kinetic models for APCVD and LPCVD are discussed, thereby providing insight for understanding the differences between APCVD vs LPCVD/UHVCVD graphene syntheses. Interestingly, graphene syntheses using a Cu catalyst in APCVD processes at higher methane concentrations revealed that the growth is not self-limiting, which is in contrast to previous observations for the LPCVD case. Additionally, nanoribbons and nanostrips with widths ranging from 20 to 100 nm were also observed on the APCVD grown graphene. Interactions between graphene nanofeatures (edges, folds) and the contaminant metal nanoparticles from the Cu etchant were observed, suggesting that these samples could potentially be employed to investigate the chemical reactivity of single molecules, DNA, and nanoparticles with monolayer graphene.

  18. A solvent- and vacuum-free route to large-area perovskite films for efficient solar modules

    Science.gov (United States)

    Chen, Han; Ye, Fei; Tang, Wentao; He, Jinjin; Yin, Maoshu; Wang, Yanbo; Xie, Fengxian; Bi, Enbing; Yang, Xudong; Grätzel, Michael; Han, Liyuan

    2017-10-01

    Recent advances in the use of organic–inorganic hybrid perovskites for optoelectronics have been rapid, with reported power conversion efficiencies of up to 22 per cent for perovskite solar cells. Improvements in stability have also enabled testing over a timescale of thousands of hours. However, large-scale deployment of such cells will also require the ability to produce large-area, uniformly high-quality perovskite films. A key challenge is to overcome the substantial reduction in power conversion efficiency when a small device is scaled up: a reduction from over 20 per cent to about 10 per cent is found when a common aperture area of about 0.1 square centimetres is increased to more than 25 square centimetres. Here we report a new deposition route for methyl ammonium lead halide perovskite films that does not rely on use of a common solvent or vacuum: rather, it relies on the rapid conversion of amine complex precursors to perovskite films, followed by a pressure application step. The deposited perovskite films were free of pin-holes and highly uniform. Importantly, the new deposition approach can be performed in air at low temperatures, facilitating fabrication of large-area perovskite devices. We reached a certified power conversion efficiency of 12.1 per cent with an aperture area of 36.1 square centimetres for a mesoporous TiO2-based perovskite solar module architecture.

  19. Large-area luminescent solar concentrators based on `Stokes-shift-engineered' nanocrystals in a mass-polymerized PMMA matrix

    Science.gov (United States)

    Meinardi, Francesco; Colombo, Annalisa; Velizhanin, Kirill A.; Simonutti, Roberto; Lorenzon, Monica; Beverina, Luca; Viswanatha, Ranjani; Klimov, Victor I.; Brovelli, Sergio

    2014-05-01

    Luminescent solar concentrators are cost-effective complements to semiconductor photovoltaics that can boost the output of solar cells and allow for the integration of photovoltaic-active architectural elements into buildings (for example, photovoltaic windows). Colloidal quantum dots are attractive for use in luminescent solar concentrators, but their small Stokes shift results in reabsorption losses that hinder the realization of large-area devices. Here, we use `Stokes-shift-engineered' CdSe/CdS quantum dots with giant shells (giant quantum dots) to realize luminescent solar concentrators without reabsorption losses for device dimensions up to tens of centimetres. Monte-Carlo simulations show a 100-fold increase in efficiency using giant quantum dots compared with core-only nanocrystals. We demonstrate the feasibility of this approach by using high-optical-quality quantum dot-polymethylmethacrylate nanocomposites fabricated using a modified industrial method that preserves the light-emitting properties of giant quantum dots upon incorporation into the polymer. Study of these luminescent solar concentrators yields optical efficiencies >10% and an effective concentration factor of 4.4. These results demonstrate the significant promise of Stokes-shift-engineered quantum dots for large-area luminescent solar concentrators.

  20. One-dimensional self-confinement promotes polymorph selection in large-area organic semiconductor thin films

    KAUST Repository

    Giri, Gaurav

    2014-04-16

    A crystal\\'s structure has significant impact on its resulting biological, physical, optical and electronic properties. In organic electronics, 6,13(bis-triisopropylsilylethynyl)pentacene (TIPS-pentacene), a small-molecule organic semiconductor, adopts metastable polymorphs possessing significantly faster charge transport than the equilibrium crystal when deposited using the solution-shearing method. Here, we use a combination of high-speed polarized optical microscopy, in situ microbeam grazing incidence wide-angle X-ray-scattering and molecular simulations to understand the mechanism behind formation of metastable TIPS-pentacene polymorphs. We observe that thin-film crystallization occurs first at the air-solution interface, and nanoscale vertical spatial confinement of the solution results in formation of metastable polymorphs, a one-dimensional and large-area analogy to crystallization of polymorphs in nanoporous matrices. We demonstrate that metastable polymorphism can be tuned with unprecedented control and produced over large areas by either varying physical confinement conditions or by tuning energetic conditions during crystallization through use of solvent molecules of various sizes. © 2014 Macmillan Publishers Limited.

  1. Study of electron beam uniformity in large-area multi-aperture diode with arc plasma cathode

    Science.gov (United States)

    Kandaurov, I. V.; Kurkuchekov, V. V.; Trunev, Yu A.

    2017-05-01

    The use of plasma emission cathode in the conjunction with a multiple apertured electron optical system (EOS) is promising for the multi-MW class electron beams of a large cross-sectional area. In a multi-aperture source, the beam parameters could be raised simply due to increase of the number of apertures (i.e. an effective emission area), if a uniformity of the electron emission over a large-area plasma cathode is ensured. In the presented paper, the cross-sectional distribution of the emission current density was investigated using the X-ray diagnostic technique for two versions of the diode-type EOS, with electrodes performed as flat molybdenum “grids”. The first one had 241 apertures arranged hexagonally inside a circle with a diameter of 8.3 cm and the second had 499 apertures within a circle of 11.8cm diameter. The emission plasma is produced using a single arc-discharge plasma generator placed on the axis at 20 cm from the EOS. It was demonstrated that multi-aperture systems with a single on-axis plasma generator can be effectively employed to obtain large-area beams, even in the presence of the guiding magnetic field. All apertures are emitting in the 499-apertured EOS. The beam current density is quite uniform up to the radius 2.5cm and gradually decreases to the periphery.

  2. Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Alstrup, J.; Spanggaard, H.

    2004-01-01

    of a Buckminsterfullerene (C-60) layer followed by an aluminum electrode completed the device. The typical efficiency of the prototype devices consisting of three solar cells in series were 0.0046% (under AM1.5 conditions) with open-circuit voltages (V-oc) of 0.73 V and short-circuit currents (I-sc) of 20 muA cm(-2......). The half-life based on I-sc in air for the devices were 63 h. The cells were laminated in a 125 mum PET encasement. Lamination had a negative effect on the lifetime. We demonstrate the feasibility of industrial production of large area solar cells (1 m(2)) by silk screen printing and envisage......The possibility of making large area (100 cm(2)) polymer solar cells based on the conjugated polymer poly 1,4-(2-methoxy-5-ethylhexyloxy)phenylenevinylene (MEH-PPV) was demonstrated. Devices were prepared by etching an electrode pattern on ITO covered polyethyleneterephthalate (PET) substrates...

  3. ISO 9001 PERFORMANCE: A HOLISTIC AND MIXED-METHOD ANALYSIS

    OpenAIRE

    Alcina A. de Sena Portugal Dias*, Iñaki Heras Saizarbitoria

    2016-01-01

    Purpose – The aim of this paper is to analyse the impact of the ISO 9001 Standard on organizational performance from a holistic theoretical perspective, using a mixed-method analysis. More specifically, the qualitative study considers the impact of the adoption of ISO 9001 on the general performance of certified companies. The quantitative study analysed the effect of ISO 9001 on productivity, business value and increase on sales. Design/methodology/approach – A holistic and integra...

  4. Implementation of ISO 9000 Quality Standard into Adult Education

    Directory of Open Access Journals (Sweden)

    Andrej Sotošek

    2000-12-01

    Full Text Available Competition in the field of adult education in Slovenia has become very tough  in the second half of the 1990s. Therefore, educational institutions are forced to use every advantage over the competitors in the educational market. One of them is the quality system in educational process. Such competitive position setting strategic development objectives is also the strategy of UPI - Ljudska univerza Žalec. Through development objectives, relationships with our partners and customers, as well as on the basis of analysis of the position and connections of Slovenia within the European Union and its involvement in international projects we estimated that we should set up a quality system in our institution involving managerial, organisational and professional function. It is important that the system should be comparable and verifiable according to the European standards. We have chosen the Quality System according to ISO 9000 quality standards as the most suitable model. It offers an institutional framework as well as a good basis for an internal and external verification of the efficiency of the system in real life. It also enables corrections to deviations. However, it lacks a stronger stress on internal self-control and self-evaluation, which is emphasised in the model of quality assurance in education developed by a group of experts to order of Ministry of Education and Sport. Both model s can be combined and are mutually compatible. I am convinced of the great importance of self-evaluation in education. Yet, without an appropriate institutional framework and basic external verification the self-evaluation remains on the interna! and subjective level of judgement within an individual educational institution.

  5. Cotation de fabrication avec les normes ISO

    CERN Document Server

    Anselmetti, Bernard

    2010-01-01

    La cotation ISO en production impose de nouvelles méthodologies pour élaborer les documents de maîtrise de la qualité géométrique des produits : les dessins de phase, du brut et d'états intermédiaires pour la conformité des pièces et les fiches de production, de réglage, de contrôle et de surveillance pour la conformité des moyens de production. Une méthode de transfert unidirectionnelle simple permet d'établir des dessins de phase en normes ISO et d'optimiser la répartition des tolérances à isocapabilité. Cette cotation est déclinée en cotation d'état intermédiaire, de production et de réglage. Une méthode tridimensionnelle est proposée pour prendre en compte les effets des défauts angulaires. Une maquette montre les fonctionnalités envisageables pour les futurs outils d'aides au tolérancement de fabrication au sein de la CFAO. De nombreux exercices illustrent les différentes démarches. Ce Manuel de tolérancement est principalement destiné aux préparateurs méthodes et aux c...

  6. Risk in Management Systems according to ISO standard

    Directory of Open Access Journals (Sweden)

    P. Królas

    2010-07-01

    Full Text Available The purpose of this article was to present selected management standards in context of risk management. It presents main ISOmanagement standards (ISO 9001, ISO 14001, OHSAS 18001, ISO 27001, BS 25999, ISO 31000 that apply to polish enterprises. In thefirst part of this article there are analyzed management standards regarding quality, environment, occupational health and safety,information security, as well as business continuity management and risk management. The second part of the article discusses the processof dealing with risk based on chosen management standard.

  7. ISO standartų pritaikomumas kaimo turizmo versle

    OpenAIRE

    Bričkutė, Ernesta

    2014-01-01

    Lietuvos kaimo turizmo asociacija klasifikuoja kaimo turizmo sodybas, suteikdama joms pagal nustatytus standartus nuo 1 iki 5 gandrų ženklus, tačiau ISO standartai netaikomi kaimo turizmo sodybų kokybės vertinime, todėl kyla probleminis klausimas, ar ISO standartai yra patrauklūs Lietuvos kaimo turizmo apgyvendinimo sektoriui? Tyrimo tikslas – išsiaiškinti ISO standartų pritaikomumą Lietuvos kaimo turizmo versle. Tyrimo uždaviniai: 1. Išanalizuoti ISO standartų sampratą. 2. Atlikt...

  8. The dark side of ISO 14001: The symbolic environmental behavior

    Directory of Open Access Journals (Sweden)

    Vera Ferrón Vílchez

    2017-01-01

    Full Text Available Some of the academic research on ISO 14001 has focused on analyzing the benefits of its adoption. However, this international standard has also received some criticism, particularly in respect of the adoption of ISO 14001 when not accompanied by significant improvements in environmental performance. This study analyzes the relationship between the symbolic environmental behavior and the adoption of ISO 14001. In so doing, it uses binary logistic regression to analyze an international sample of 1961 manufacturing facilities that each employs more than 50 people. The results indicate that the higher the symbolic environmental performance of the firm, the greater the probability of adopting ISO 14001.

  9. Large area tunnel oxide passivated rear contact n -type Si solar cells with 21.2% efficiency: Large area tunnel oxide passivated rear contact n -type Si solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Tao, Yuguo [Georgia Inst. of Technology, Atlanta, GA (United States); Upadhyaya, Vijaykumar [Georgia Inst. of Technology, Atlanta, GA (United States); Chen, Chia-Wei [Georgia Inst. of Technology, Atlanta, GA (United States); Payne, Adam [Suniva Inc., Norcross GA (United States); Chang, Elizabeth Lori [Georgia Inst. of Technology, Atlanta, GA (United States); Upadhyaya, Ajay [Georgia Inst. of Technology, Atlanta, GA (United States); Rohatgi, Ajeet [Georgia Inst. of Technology, Atlanta, GA (United States); Suniva Inc., Norcross GA (United States)

    2016-01-21

    This paper reports on the implementation of carrier-selective tunnel oxide passivated rear contact for high-efficiency screen-printed large area n-type front junction crystalline Si solar cells. It is shown that the tunnel oxide grown in nitric acid at room temperature (25°C) and capped with n+ polysilicon layer provides excellent rear contact passivation with implied open-circuit voltage iVoc of 714mV and saturation current density J0b of 10.3 fA/cm2 for the back surface field region. The durability of this passivation scheme is also investigated for a back-end high temperature process. In combination with an ion-implanted Al2O3-passivated boron emitter and screen-printed front metal grids, this passivated rear contact enabled 21.2% efficient front junction Si solar cells on 239 cm2 commercial grade n-type Czochralski wafers.

  10. Accreditation process in European countries - an EFLM survey.

    Science.gov (United States)

    Boursier, Guilaine; Vukasovic, Ines; Brguljan, Pika Mesko; Lohmander, Maria; Ghita, Irina; Bernabeu Andreu, Francisco A; Barrett, Edward; Brugnoni, Duilio; Kroupis, Christos; Sprongl, Ludek; Thelen, Marc H M; Vanstapel, Florent; Vodnik, Tatjana; Huisman, Willem; Vaubourdolle, Michel

    2016-04-01

    Accreditation is a valuable resource for medical laboratories. The development of quality systems based on ISO 15189 has taken place in many laboratories in the European countries but data about accreditation remain scarce. The EFLM Working Group "Accreditation and ISO/CEN standards" conducted a survey that reviews the current state of the accreditation process in European countries. An on-line questionnaire was addressed to delegates of 39 EFLM scientific societies in March 2014. One answer by country was taken into account. The survey was dealing with mandatory status, number of accredited medical laboratories in each country, possibility of flexible scope and concerned medical fields. The status of point-of-care testing (POCT) in each country was also studied. Twenty-nine responses (74%) were registered. All the assessed countries (100%) have begun an accreditation process in various ways. All the national accreditation bodies (NAB) offer or are working to offer an ISO 15189 accreditation. The accreditation process most often concerns all phases of the examination and various medical fields. Medical laboratories are responsible for POCT in 20 (69%) countries. The accreditation process for POCT, according to ISO 15189 and ISO 22870, is also developing. While there are several variations in the approaches to accreditation of medical laboratories in the European countries, the ISO 15189 accreditation project has been widely accepted. The use of a unique standard and the cooperation among countries due to scientific societies, EFLM, accreditation bodies and EA enable laboratory professionals to move toward uniform implementation of the accreditation concept.

  11. Quality Management System according to the family of Cuban Standards ISO 9000 CN Total Quality approach.

    Directory of Open Access Journals (Sweden)

    Leonel C. Alfaro Pérez

    2009-12-01

    Full Text Available In this article we develop some considerations and suggestions for organizations in Cuba who want to design and implement systems with Quality Management Total Quality approach to the family of Cuban Standards ISO 9000 CN. It makes a comparative analysis between what is a System of Quality Management, Total Quality and the European model of quality management, detailing the similarities and differences, which allow us to understand how systems can be designed and managed focuses on Total Quality. It describes in a coherent way the main activities of a quality management system which can not be absent in its design and subsequent management.

  12. Grid-based mapping: A method for rapidly determining the spatial distributions of small features over very large areas

    Science.gov (United States)

    Ramsdale, Jason D.; Balme, Matthew R.; Conway, Susan J.; Gallagher, Colman; van Gasselt, Stephan A.; Hauber, Ernst; Orgel, Csilla; Séjourné, Antoine; Skinner, James A.; Costard, Francois; Johnsson, Andreas; Losiak, Anna; Reiss, Dennis; Swirad, Zuzanna M.; Kereszturi, Akos; Smith, Isaac B.; Platz, Thomas

    2017-06-01

    The increased volume, spatial resolution, and areal coverage of high-resolution images of Mars over the past 15 years have led to an increased quantity and variety of small-scale landform identifications. Though many such landforms are too small to represent individually on regional-scale maps, determining their presence or absence across large areas helps form the observational basis for developing hypotheses on the geological nature and environmental history of a study area. The combination of improved spatial resolution and near-continuous coverage significantly increases the time required to analyse the data. This becomes problematic when attempting regional or global-scale studies of metre and decametre-scale landforms. Here, we describe an approach for mapping small features (from decimetre to kilometre scale) across large areas, formulated for a project to study the northern plains of Mars, and provide context on how this method was developed and how it can be implemented. Rather than ;mapping; with points and polygons, grid-based mapping uses a ;tick box; approach to efficiently record the locations of specific landforms (we use an example suite of glacial landforms; including viscous flow features, the latitude dependant mantle and polygonised ground). A grid of squares (e.g. 20 km by 20 km) is created over the mapping area. Then the basemap data are systematically examined, grid-square by grid-square at full resolution, in order to identify the landforms while recording the presence or absence of selected landforms in each grid-square to determine spatial distributions. The result is a series of grids recording the distribution of all the mapped landforms across the study area. In some ways, these are equivalent to raster images, as they show a continuous distribution-field of the various landforms across a defined (rectangular, in most cases) area. When overlain on context maps, these form a coarse, digital landform map. We find that grid-based mapping

  13. A large-area ultra-precision 2D geometrical measurement technique based on statistical random phase detection

    Science.gov (United States)

    Ekberg, Peter; Stiblert, Lars; Mattsson, Lars

    2012-03-01

    The manufacturing of high-quality chrome masks used in the display industry for the manufacturing of liquid crystals, organic light emission diodes and other display devices would not be possible without high-precision large-area metrology. In contrast to the semiconductor industry where 6‧ masks are most common, the quartz glass masks for the manufacturing of large area TVs can have sizes of up to 1.6 × 1.8 m2. Besides the large area, there are demands of sub-micrometer accuracy in ‘registration’, i.e. absolute dimensional measurements and nanometer requirements for ‘overlay’, i.e. repeatability. The technique for making such precise measurements on large masks is one of the most challenging tasks in dimensional metrology today. This paper presents a new approach to two-dimensional (2D) ultra-precision measurements based on random sampling. The technique was recently presented for ultra-precise one-dimensional (1D) measurement. The 1D method relies on timing the scanning of a focused laser beam 200 µm in the Y-direction from an interferometrically determined reference position. This microsweep is controlled by an acousto-optical deflector. By letting the microsweep scan from random X-positions, we can build XY-recordings through a time-to-space conversion that gives very precise maps of the feature edges of the masks. The method differs a lot from ordinary image processing methods using CCD or CMOS sensors for capturing images in the spatial domain. We use events grabbed by a single detector in the time domain in both the X- and Y-directions. After a simple scaling, we get precise and repeatable spatial information. Thanks to the extremely linear microsweep and its precise power control, spatial and intensity distortions, common in ordinary image processing systems using 2D optics and 2D sensors, can be practically eliminated. Our 2D method has proved to give a standard deviation in repeatability of less than 4 nm (1σ) in both the X- and Y

  14. NAVIS-An UGV indoor positioning system using laser scan matching for large-area real-time applications.

    Science.gov (United States)

    Tang, Jian; Chen, Yuwei; Jaakkola, Anttoni; Liu, Jinbing; Hyyppä, Juha; Hyyppä, Hannu

    2014-07-04

    Laser scan matching with grid-based maps is a promising tool for real-time indoor positioning of mobile Unmanned Ground Vehicles (UGVs). While there are critical implementation problems, such as the ability to estimate the position by sensing the unknown indoor environment with sufficient accuracy and low enough latency for stable vehicle control, further development work is necessary. Unfortunately, most of the existing methods employ heuristics for quick positioning in which numerous accumulated errors easily lead to loss of positioning accuracy. This severely restricts its applications in large areas and over lengthy periods of time. This paper introduces an efficient real-time mobile UGV indoor positioning system for large-area applications using laser scan matching with an improved probabilistically-motivated Maximum Likelihood Estimation (IMLE) algorithm, which is based on a multi-resolution patch-divided grid likelihood map. Compared with traditional methods, the improvements embodied in IMLE include: (a) Iterative Closed Point (ICP) preprocessing, which adaptively decreases the search scope; (b) a totally brute search matching method on multi-resolution map layers, based on the likelihood value between current laser scan and the grid map within refined search scope, adopted to obtain the global optimum position at each scan matching; and (c) a patch-divided likelihood map supporting a large indoor area. A UGV platform called NAVIS was designed, manufactured, and tested based on a low-cost robot integrating a LiDAR and an odometer sensor to verify the IMLE algorithm. A series of experiments based on simulated data and field tests with NAVIS proved that the proposed IMEL algorithm is a better way to perform local scan matching that can offer a quick and stable positioning solution with high accuracy so it can be part of a large area localization/mapping, application. The NAVIS platform can reach an updating rate of 12 Hz in a feature-rich environment and 2 Hz

  15. Analysis of ISO NE Balancing Requirements: Uncertainty-based Secure Ranges for ISO New England Dynamic Inerchange Adjustments

    Energy Technology Data Exchange (ETDEWEB)

    Etingov, Pavel V.; Makarov, Yuri V.; Wu, Di; Hou, Zhangshuan; Sun, Yannan; Maslennikov, S.; Luo, X.; Zheng, T.; George, S.; Knowland, T.; Litvinov, E.; Weaver, S.; Sanchez, E.

    2013-01-31

    The document describes detailed uncertainty quantification (UQ) methodology developed by PNNL to estimate secure ranges of potential dynamic intra-hour interchange adjustments in the ISO-NE system and provides description of the dynamic interchange adjustment (DINA) tool developed under the same contract. The overall system ramping up and down capability, spinning reserve requirements, interchange schedules, load variations and uncertainties from various sources that are relevant to the ISO-NE system are incorporated into the methodology and the tool. The DINA tool has been tested by PNNL and ISO-NE staff engineers using ISO-NE data.

  16. Intermediate species measurement during iso-butanol auto-ignition

    KAUST Repository

    Ji, Weiqi

    2015-10-01

    © 2015 The Combustion Institute.Published by Elsevier Inc. All rights reserved. This work presents the time histories of intermediate species during the auto-ignition of iso-butanol at high pressure and intermediate temperature conditions obtained using a rapid compression machine and recently developed fast sampling system. Iso-butanol ignition delays were acquired for iso-butanol/O2 mixture with an inert/O2 ratio of 7.26, equivalence ratio of 0.4, in the temperature range of 840-950 K and at pressure of 25 bar. Fast sampling and gas chromatography were used to acquire and quantify the intermediate species during the ignition delay of the same mixture at P = 25.3 bar and T = 905 K. The ignition delay times and quantitative measurements of the mole fraction time histories of methane, ethene, propene, iso-butene, iso-butyraldehyde, iso-butanol, and carbon monoxide were compared with predictions from the detailed mechanisms developed by Sarathy et al., Merchant et al., and Cai et al. It is shown that while the Sarathy mechanism well predicts the overall ignition delay time, it overpredicts ethene by a factor of 6-10, underpredicts iso-butene by a factor of 2, and overpredicts iso-butyraldehyde by a factor of 2. Reaction path and sensitivity analyses were carried out to identify the reactions responsible for the observed inadequacy. The rates of iso-butanol hydrogen atom abstraction by OH radical and the beta-scission reactions of hydroxybutyl radicals were updated based on recently published quantum calculation results. Significant improvements were achieved in predicting ignition delay at high pressures (25 and 30 bar) and the species concentrations of ethene and iso-butene. However, the updated mechanism still overpredicts iso-butyraldehyde concentrations. Also, the updated mechanism degrades the prediction in ignition delay at lower pressure (15 bar) compared to the original mechanism developed by Sarathy et al.

  17. Iso 19011:2002--a combined auditing standard for quality and environmental management systems.

    Science.gov (United States)

    Johnson, G L

    2000-01-01

    In a precedent-setting decision in 1998, the International Organization for Standardization (ISO) directed ISO Technical Committee (TC) 176 on Quality Management and ISO TC 207 on Environmental Management to develop jointly a single guideline standard for auditing quality and environmental management systems. When approved, this standard would replace ISO 10011-1, ISO 10011-2, and ISO 10011-3 on quality auditing and ISO 14010, ISO 14011, and ISO 14012 on environmental auditing. A Joint Working Group (JWG) was established comprising experts from both TC 176 and TC 207 to develop the new standard, ISO 19011, Guidelines on Quality and/or Environmental Management Systems Auditing, and to incorporate lessons learned from efforts to improve compatibility between ISO 9001/9004 and ISO 14001/14004, the standards for quality and environmental management systems, respectively. Work is proceeding on the development of ISO 19011 with an expected completion in early 2002.

  18. Mednarodni standardi - veličine in enote (ISO 31-0 do 31-13)

    OpenAIRE

    Glavič, Peter

    2015-01-01

    In this paper the international standards ISO 31 (Quantities and units) are presented with the following parts: ISO 31-0 (General principles), ISO 31-1 (Space and time), ISO 31-2 (Periodic and related phenomena), ISO 31-3 (Mechanics), ISO 31-4 (Heat), ISO 31-5 (Electricity and magnetism), ISO 31-8 (Physical chemistry and molecular physics), ISO 31-12 (Characteristic numbers)and others. The emphasis is given on the basic principles, which is important for writing of reports, presentations, art...

  19. Stellar Archaeology and Galaxy Genesis: The Need for Large Area Multi-Object Spectrograph on 8 m-Class Telescopes

    Science.gov (United States)

    Irwin, Mike J.; Lewis, Geraint F.

    The origin and evolution of galaxies like the Milky Way and M31 remain among the key questions in astrophysics. The galaxies we see today in and around the Local Group are representatives of the general field population of the Universe and have been evolving for the majority of cosmic time. As our nearest neighbour systems they can be studied in far more detail than their distant counterparts and hence provide our best hope for understanding star formation and prototypical galaxy evolution over the lifetime of the Universe [K. Freeman, J. Bland-Hawthorn in Annu. Rev. Astron. Astrophys. 40, 487 (2002)]. Significant observational progress has been made, but we are still a long way from understanding galaxy genesis. To unravel this formative epoch, detailed large area multi-object spectroscopy of spatial, kinematic and chemical structures on 8 m-class telescopes are required, to provide the link between local near-field cosmology and predictions from the high-redshift Universe.

  20. Large-area patterning of sub-100 nm epitaxial L10 FePt dots array via nanoimprint lithography

    Directory of Open Access Journals (Sweden)

    Zheng Li

    2015-08-01

    Full Text Available Bit-patterned media, a promising candidate for next generation high density magnetic recording, requires sub-100 nm dots array on a wafer scale, a high degree of patterning control of the size distribution, and a material with high perpendicular anisotropy. In this work, large area (0.75 cm × 0.75 cm dots array was achieved by nanoimprint lithography and ion milling from L10 FePt thin films that are pre-sputtered at 450 °C with both high crystalline quality and good chemical order. The sub-100 nm dots are decoupled from each other and show both narrow size distributions and high coercivity values on the order of 11 kOe. Our work would cast light for the application of bit-patterned media.

  1. Determination of the specific alpha activity of thick sources with a large area ZnS(Ag) scintillation detector.

    Science.gov (United States)

    Djurasević, M; Vukanac, I; Kandić, A; Nadderd, L; Milosević, Z; Radenković, M

    2007-01-01

    A method for determining the specific alpha activity of thick sources using a large area ZnS(Ag) scintillation detector is presented. In this method a quadratic relationship between the detector response and window thickness is assumed. This method provides a quick estimation of alpha activity in the sample, so it is an indicative method. The aim of this experimental work is to approve theoretical assumption and to develop a standard routine method for absolute alpha measurements of thick contaminated environmental sources. For this purpose reference material U(3)O(8) and spiked standards of soil were used. Measurements of contaminated soil samples from south Serbia showed the practical application of this method.

  2. High resolution large area modular array of reflectors /LAMAR/ Wolter type I X-ray telescope for Spacelab

    Science.gov (United States)

    Catura, R. C.; Acton, L. W.; Brown, W. A.; Gilbreth, C. W.; Springer, L. A.; Vieira, J. R.; Culhane, J. L.; Mason, I. W.; Siegmund, O.; Patrick, T. J.

    1982-01-01

    The Spacelab Wolter type I X-ray telescope, which is intended for both astronomical observations and the functional verification of the future Large Area Modular Array of Reflectors (LAMAR) concept, comprises five mirrors and is designed to have a blur circle radius of 20 arcsec, with effective areas of (1) 400 sq cm at 0.25 keV, (2) 200 sq cm in the 0.5-2.0 keV range, and (3) 50 sq cm between 2 and 5 keV. A rotary interchange mechanism allows either of two imaging proportional counters to be placed at the telescope focus. The telescope's primary objective is the observational study of galactic and extragalactic X-ray sources, extending the work of the Einstein Observatory to fainter sources and higher energies. Secondarily, the costs and performance to be expected from the use of this telescope type in the LAMAR mission will be assessed.

  3. Measurement of the high-energy gamma-ray emission from the Moon with the Fermi Large Area Telescope

    CERN Document Server

    Ackermann, M.; Albert, A.; Atwood, W. B.; Baldini, L.; Barbiellini, G.; Bastieri, D.; Bellazzini, R.; Bissaldi, E.; Blandford, R. D.; Bonino, R.; Bottacini, E.; Bregeon, J.; Bruel, P.; Buehler, R.; Caliandro, G. A.; Cameron, R. A.; Caragiulo, M.; Caraveo, P.A.; Cavazzuti, E.; Cecchi, C.; Chekhtman, A.; Chiang, J.; Chiaro, G.; Ciprini, S.; Claus, R.; Cohen-Tanugi, J.; Costanza, F.; Cuoco, A.; Cutini, S.; D'Ammando, F.; de Angelis, A.; de Palma, F.; Desiante, R.; Digel, S.W.; Di Venere, L.; Drell, P.S.; Favuzzi, C.; Fegan, S.J.; Focke, W.B.; Franckowiak, A.; Funk, S.; Fusco, P.; Gargano, F.; Gasparrini, D.; Giglietto, N.; Giordano, F.; Giroletti, M.; Glanzman, T.; Godfrey, G.; Grenier, I. A.; Grove, J.E.; Guiriec, S.; Harding, A. K.; Hewitt, J. W.; Horan, D.; Hou, X.; Iafrate, G.; Jóhannesson, G.; Kamae, T.; Kuss, M.; Larsson, S.; Latronico, L.; Li, J.; Li, L.; Longo, F.; Loparco, F.; Lovellette, M.N.; Lubrano, P.; Magill, J.; Maldera, S.; Manfreda, A.; Mayer, M.; Mazziotta, M.N.; Michelson, P.F.; Mitthumsiri, W.; Mizuno, T.; Monzani, M.E.; Morselli, A.; Murgia, S.; Nuss, E.; Omodei, N.; Orlando, E.; Ormes, J.F.; Paneque, D.; Perkins, J. S.; Pesce-Rollins, M.; Petrosian, V.; Piron, F.; Pivato, G.; Rainò, S.; Rando, R.; Razzano, M.; Reimer, A.; Reimer, O.; Sgrò, C.; Reposeur, T.; Siskind, E.J.; Spada, F.; Spandre, G.; Spinelli, P.; Takahashi, H.; Thayer, J.B.; Thompson, D.J.; Tibaldo, L.; Torres, D. F.; Tosti, G.; Troja, E.; Vianello, G.; Winer, B. L.; Wood, K. S.; Yassine, M.; Cerutti, F.; Ferrari, A.; Sala, P.R.

    2016-01-01

    We have measured the gamma-ray emission spectrum of the Moon using the data collected by the Large Area Telescope onboard the Fermi satellite during its first 7 years of operation, in the energy range from 30 MeV up to a few GeV. We have also studied the time evolution of the flux, finding a correlation with the solar activity. We have developed a full Monte Carlo simulation describing the interactions of cosmic rays with the lunar surface. The results of the present analysis can be explained in the framework of this model, where the production of gamma rays is due to the interactions of cosmic-ray proton and helium nuclei with the surface of the Moon. Finally, we have used our simulation to derive the cosmic-ray proton and helium spectra near Earth from the Moon gamma-ray data.

  4. Characterization of large area ZnS(Ag) detector for gross alpha and beta activity measurements in tap water plants

    Energy Technology Data Exchange (ETDEWEB)

    Lunardon, M.; Cester, D.; Mistura, G.; Moretto, S.; Stevanato, L.; Viesti, G. [Department of Physics and Astronomy ' Galileo Galilei' , University of Padova, (Italy); Schotanus, P.; Bodewits, E. [SCIONIX Holland BV, (Netherlands)

    2015-07-01

    In this work we present the characterization of a large area 200 x 200 mm{sup 2} EJ-444 scintillation detector to be used for monitoring gross alpha and beta activity in tap water plants. Specific tests were performed to determine the best setup to readout the light from the detector side in order to have the possibility to stack many detectors and get a compact device with total active area of the order of 1 m{sup 2}. Alpha/Beta discrimination, efficiency and homogeneity tests were carried out with alpha and beta sources. Background from ambient radioactivity was measured as well. Alpha/beta real-time monitoring in drinking water is a goal of the EU project TAWARA{sub R}TM. (authors)

  5. Calibration of the Large Area X-Ray Proportional Counter (LAXPC) Instrument on board AstroSat

    Science.gov (United States)

    Antia, H. M.; Yadav, J. S.; Agrawal, P. C.; Verdhan Chauhan, Jai; Manchanda, R. K.; Chitnis, Varsha; Paul, Biswajit; Dedhia, Dhiraj; Shah, Parag; Gujar, V. M.; Katoch, Tilak; Kurhade, V. N.; Madhwani, Pankaj; Manojkumar, T. K.; Nikam, V. A.; Pandya, A. S.; Parmar, J. V.; Pawar, D. M.; Pahari, Mayukh; Misra, Ranjeev; Navalgund, K. H.; Pandiyan, R.; Sharma, K. S.; Subbarao, K.

    2017-07-01

    We present the calibration and background model for the Large Area X-ray Proportional Counter (LAXPC) detectors on board AstroSat. The LAXPC instrument has three nominally identical detectors to achieve a large collecting area. These detectors are independent of each other, and in the event analysis mode they record the arrival time and energy of each photon that is detected. The detectors have a time resolution of 10 μs and a dead-time of about 42 μs. This makes LAXPC ideal for timing studies. The energy resolution and peak channel-to-energy mapping were obtained from calibration on the ground using radioactive sources coupled with GEANT4 simulations of the detectors. The response matrix was further refined from observations of the Crab after launch. At around 20 keV the energy resolution of the detectors is 10%-15%, while the combined effective area of the three detectors is about 6000 cm2.

  6. Nanoimprinting techniques for large-area three-dimensional negative index metamaterials with operation in the visible and telecom bands.

    Science.gov (United States)

    Gao, Li; Shigeta, Kazuki; Vazquez-Guardado, Abraham; Progler, Christopher J; Bogart, Gregory R; Rogers, John A; Chanda, Debashis

    2014-06-24

    We report advances in materials, designs, and fabrication schemes for large-area negative index metamaterials (NIMs) in multilayer "fishnet" layouts that offer negative index behavior at wavelengths into the visible regime. A simple nanoimprinting scheme capable of implementation using standard, widely available tools followed by a subtractive, physical liftoff step provides an enabling route for the fabrication. Computational analysis of reflection and transmission measurements suggests that the resulting structures offer negative index of refraction that spans both the visible wavelength range (529-720 nm) and the telecommunication band (1.35-1.6 μm). The data reveal that these large (>75 cm(2)) imprinted NIMs have predictable behaviors, good spatial uniformity in properties, and figures of merit as high as 4.3 in the visible range.

  7. Near room temperature and large-area synthesis of ZnO/Cu2O heterojunction for photocatalytic properties

    Science.gov (United States)

    Gao, Shiyong; Zhang, Jiejing; Li, Wenqiang; Jiao, Shujie; Nie, Yanguang; Fan, Huaiyun; Zeng, Zhi; Yu, Qingjiang; Wang, Jinzhong; Zhang, Xitian

    2018-01-01

    Large-area ZnO/Cu2O heterojunction have been successfully synthesized on Cu foil through a simple two-step solution method at near room temperature. The field emission scanning electron microscopy characterization indicates that the morphology of as-prepared Cu2O film grown on Cu foil is octahedral structure with diameter of ∼450 nm and ZnO is nanorod arrays structure with diameter of ∼150 nm. The current-voltage measurement of ZnO/Cu2O heterojunction shows a typical rectifying characteristics. Moreover, the photocatalytic test indicates that ZnO/Cu2O heterojunction exhibits high photocatalytic efficient for degradation of congo red dyes. The possible photocatalytic mechanism of ZnO/Cu2O heterojunction is also presented.

  8. Low-temperature synthesis and nanomagnetism of large-area alpha-Fe2O3 nanobelts.

    Science.gov (United States)

    Zhong, Minglong; Liu, Zhongwu; Yu, Hongya; Zhong, Xichun; Zeng, Dechang; Ramanujan, R V

    2013-02-01

    Large-area one dimensional (1D) alpha-Fe2O3 nanostructures were grown on iron substrates by catalyst-free thermal oxidation process at low temperatures in air. The structure characterization revealed that the nanostructures are single crystalline alpha-Fe2O3. Two kinds of alpha-Fe2O3 nanostructures, nanobelts and nanoflakes, were obtained due to the different growth temperature range. A surface diffusion mechanism is proposed to account for the nanobelts and nanoflakes growth. The Morin temperature T(M) of pure 1D alpha-Fe2O3 nanostructures is 121 K, which is far below their bulk counterparts. The coercive field depends on temperature, and takes values 471 Oe at 5 K and about 260 Oe when the temperature is greater than T(M), respectively.

  9. Burgers vector analysis of large area misfit dislocation arrays from bend contour contrast in transmission electron microscope images

    CERN Document Server

    Spiecker, E

    2002-01-01

    A transmission electron microscopy method is described which allows us to determine the Burgers vectors (BVs) of a large number of interfacial misfit dislocations (MDs) in mismatched heterostructures. The method combines large-area plan-view thinning of the sample for creating a strongly bent electron transparent foil with the analysis of the splitting and displacement of bend contours at their crossings with the MDs. The BV analysis is demonstrated for 60 deg. MDs in a low-mismatched SiGe/Si(001) heterostructure. Crossings of various bend contours with the MDs are analysed with respect to their information content for the BV analysis. In future applications the method may be used for analysing such a large number of MDs that a quantitative comparison with x-ray diffraction experiments, especially with data on diffusely scattered x-rays originating from the strain fields around the dislocations, becomes possible.

  10. An approach for mapping large-area impervious surfaces: Synergistic use of Landsat-7 ETM+ and high spatial resolution imagery

    Science.gov (United States)

    Yang, Limin; Huang, Chengquan; Homer, Collin G.; Wylie, Bruce K.; Coan, Michael

    2003-01-01

    A wide range of urban ecosystem studies, including urban hydrology, urban climate, land use planning, and resource management, require current and accurate geospatial data of urban impervious surfaces. We developed an approach to quantify urban impervious surfaces as a continuous variable by using multisensor and multisource datasets. Subpixel percent impervious surfaces at 30-m resolution were mapped using a regression tree model. The utility, practicality, and affordability of the proposed method for large-area imperviousness mapping were tested over three spatial scales (Sioux Falls, South Dakota, Richmond, Virginia, and the Chesapeake Bay areas of the United States). Average error of predicted versus actual percent impervious surface ranged from 8.8 to 11.4%, with correlation coefficients from 0.82 to 0.91. The approach is being implemented to map impervious surfaces for the entire United States as one of the major components of the circa 2000 national land cover database.

  11. PIXIE III: a very large area photon-counting CMOS pixel ASIC for sharp X-ray spectral imaging

    Science.gov (United States)

    Bellazzini, R.; Brez, A.; Spandre, G.; Minuti, M.; Pinchera, M.; Delogu, P.; de Ruvo, P. L.; Vincenzi, A.

    2015-01-01

    PIXIE III is the third generation of very large area (32 × 25 mm2) pixel ASICs developed by Pixirad Imaging Counters s.r.l. to be used in combination with suitable X-ray sensor materials (Silicon, CdTe, GaAs) in hybrid assemblies using flip-chip bonding. A Pixirad unit module based on PIXIE III shows several advances compared to what has been available up to now. It has a very broad energy range (from 2 to 100 keV before full pulse saturation), high speed (100 ns peaking time), high frame rate (larger than 500 fps), dead-time-free operation, good energy resolution (around 2 keV at 20 keV), high photo-peak fraction and sharp spectral separation between the color images. In this paper the results obtained with PIXIE III both in a test bench set-up as well in X-ray imaging applications are discussed.

  12. Search for Spectral Irregularities due to Photon-Axionlike-Particle Oscillations with the Fermi Large Area Telescope

    Science.gov (United States)

    Ajello, M.; Albert, A.; Anderson, B.; Baldini, L.; Barbiellini, G.; Bastieri, D.; Bellazzini, R.; Bissaldi, E.; Blandford, R.D.; Mirabal, N.; hide

    2016-01-01

    We report on the search for spectral irregularities induced by oscillations between photons and axion-like particles (ALPs) in the gamma-ray spectrum of NGC 1275, the central galaxy of the Perseus cluster. Using 6 years of Fermi Large Area Telescope data, we find no evidence for ALPs and exclude couplings above 5 times 10 (sup -12) per gigaelectronvolt for ALP masses less than or approximately equal to 0.5 apparent magnitude (m (sub a)) less than or approximately equal to 5 nanoelectronvolts at 95 percent confidence. The limits are competitive withthe sensitivity of planned laboratory experiments, and, together with other bounds, strongly constrain thepossibility that ALPs can reduce the gamma-ray opacity of the Universe.

  13. Investigation on the Plasma-Induced Emission Properties of Large Area Carbon Nanotube Array Cathodes with Different Morphologies

    Directory of Open Access Journals (Sweden)

    Liu Liang

    2011-01-01

    Full Text Available Abstract Large area well-aligned carbon nanotube (CNT arrays with different morphologies were synthesized by using a chemical vapor deposition. The plasma-induced emission properties of CNT array cathodes with different morphologies were investigated. The ratio of CNT height to CNT-to-CNT distance has considerable effects on their plasma-induced emission properties. As the ratio increases, emission currents of CNT array cathodes decrease due to screening effects. Under the pulse electric field of about 6 V/μm, high-intensity electron beams of 170–180 A/cm2 were emitted from the surface plasma. The production mechanism of the high-intensity electron beams emitted from the CNT arrays was plasma-induced emission. Moreover, the distribution of the electron beams was in situ characterized by the light emission from the surface plasma.

  14. Large-area self-assembled reduced graphene oxide/electrochemically exfoliated graphene hybrid films for transparent electrothermal heaters

    Science.gov (United States)

    Sun, Hongyan; Chen, Ding; Ye, Chen; Li, Xinming; Dai, Dan; Yuan, Qilong; Chee, Kuan W. A.; Zhao, Pei; Jiang, Nan; Lin, Cheng-Te

    2018-03-01

    Graphene shows great promise as a high-efficiency electrothermal film for flexible transparent defoggers/defrosters. However, it remains a great challenge to achieve a good balance between the production cost and the properties of graphene films. Here, we proposed a cost-effective self-assembly method to fabricate high-performance, large-area graphene oxide/electrochemically exfoliated graphene hybrid films for heater applications. The self-assembled graphene hybrid films with the area of 20 × 20 cm2 could be transferred onto arbitrary substrates with nonplanar surfaces and simply patterned with the hard mask. After reduction by hydrogen iodide vapor followed by 800 °C thermal treatment, the hybrid films with the transmittance of 76.2% exhibit good heating characteristics and defogging performance, which reach a saturation temperature of up to 127.5 °C when 40 V was applied for 60 s.

  15. Searching for Dark Matter Annihilation from Milky Way Dwarf Spheroidal Galaxies with Six Years of Fermi Large Area Telescope Data.

    Science.gov (United States)

    Ackermann, M; Albert, A; Anderson, B; Atwood, W B; Baldini, L; Barbiellini, G; Bastieri, D; Bechtol, K; Bellazzini, R; Bissaldi, E; Blandford, R D; Bloom, E D; Bonino, R; Bottacini, E; Brandt, T J; Bregeon, J; Bruel, P; Buehler, R; Caliandro, G A; Cameron, R A; Caputo, R; Caragiulo, M; Caraveo, P A; Cecchi, C; Charles, E; Chekhtman, A; Chiang, J; Chiaro, G; Ciprini, S; Claus, R; Cohen-Tanugi, J; Conrad, J; Cuoco, A; Cutini, S; D'Ammando, F; de Angelis, A; de Palma, F; Desiante, R; Digel, S W; Di Venere, L; Drell, P S; Drlica-Wagner, A; Essig, R; Favuzzi, C; Fegan, S J; Ferrara, E C; Focke, W B; Franckowiak, A; Fukazawa, Y; Funk, S; Fusco, P; Gargano, F; Gasparrini, D; Giglietto, N; Giordano, F; Giroletti, M; Glanzman, T; Godfrey, G; Gomez-Vargas, G A; Grenier, I A; Guiriec, S; Gustafsson, M; Hays, E; Hewitt, J W; Horan, D; Jogler, T; Jóhannesson, G; Kuss, M; Larsson, S; Latronico, L; Li, J; Li, L; Llena Garde, M; Longo, F; Loparco, F; Lubrano, P; Malyshev, D; Mayer, M; Mazziotta, M N; McEnery, J E; Meyer, M; Michelson, P F; Mizuno, T; Moiseev, A A; Monzani, M E; Morselli, A; Murgia, S; Nuss, E; Ohsugi, T; Orienti, M; Orlando, E; Ormes, J F; Paneque, D; Perkins, J S; Pesce-Rollins, M; Piron, F; Pivato, G; Porter, T A; Rainò, S; Rando, R; Razzano, M; Reimer, A; Reimer, O; Ritz, S; Sánchez-Conde, M; Schulz, A; Sehgal, N; Sgrò, C; Siskind, E J; Spada, F; Spandre, G; Spinelli, P; Strigari, L; Tajima, H; Takahashi, H; Thayer, J B; Tibaldo, L; Torres, D F; Troja, E; Vianello, G; Werner, M; Winer, B L; Wood, K S; Wood, M; Zaharijas, G; Zimmer, S

    2015-12-04

    The dwarf spheroidal satellite galaxies (dSphs) of the Milky Way are some of the most dark matter (DM) dominated objects known. We report on γ-ray observations of Milky Way dSphs based on six years of Fermi Large Area Telescope data processed with the new Pass8 event-level analysis. None of the dSphs are significantly detected in γ rays, and we present upper limits on the DM annihilation cross section from a combined analysis of 15 dSphs. These constraints are among the strongest and most robust to date and lie below the canonical thermal relic cross section for DM of mass ≲100  GeV annihilating via quark and τ-lepton channels.

  16. Low-bias active control of terahertz waves by coupling large-area CVD graphene to a terahertz metamaterial.

    Science.gov (United States)

    Valmorra, Federico; Scalari, Giacomo; Maissen, Curdin; Fu, Wangyang; Schönenberger, Christian; Choi, Jong Won; Park, Hyung Gyu; Beck, Mattias; Faist, Jérôme

    2013-07-10

    We propose an hybrid graphene/metamaterial device based on terahertz electronic split-ring resonators directly evaporated on top of a large-area single-layer CVD graphene. Room temperature time-domain spectroscopy measurements in the frequency range from 250 GHz to 2.75 THz show that the presence of the graphene strongly changes the THz metamaterial transmittance on the whole frequency range. The graphene gating allows active control of such interaction, showing a modulation depth of 11.5% with an applied bias of 10.6 V. Analytical modeling of the device provides a very good qualitative and quantitative agreement with the measured device behavior. The presented system shows potential as a THz modulator and can be relevant for strong light-matter coupling experiments.

  17. Thermal and hydrodynamic studies for micro-channel cooling for large area silicon sensors in high energy physics experiments

    Science.gov (United States)

    Flaschel, Nils; Ariza, Dario; Díez, Sergio; Gerboles, Marta; Gregor, Ingrid-Maria; Jorda, Xavier; Mas, Roser; Quirion, David; Tackmann, Kerstin; Ullan, Miguel

    2017-08-01

    Micro-channel cooling initially aiming at small-sized high-power integrated circuits is being transferred to the field of high energy physics. Today's prospects of micro-fabricating silicon opens a door to a more direct cooling of detector modules. The challenge in high energy physics is to save material in the detector construction and to cool large areas. In this paper, we are investigating micro-channel cooling as a candidate for a future cooling system for silicon detectors in a generic research and development approach. The work presented in this paper includes the production and the hydrodynamic and thermal testing of a micro-channel equipped prototype optimized to achieve a homogeneous flow distribution. Furthermore, the device was simulated using finite element methods.

  18. Roll-to-roll hot embossing system with shape preserving mechanism for the large-area fabrication of microstructures

    Science.gov (United States)

    Peng, Linfa; Wu, Hao; Shu, Yunyi; Yi, Peiyun; Deng, Yujun; Lai, Xinmin

    2016-10-01

    Roll-to-roll (R2R) hot embossing is a promising approach to fulfilling the demands of high throughput fabrication of large-area polymeric components with micro-structure arrays which have been widely employed in the domains of optics, optoelectronics, biology, chemistry, etc. Nevertheless, the characteristic of continuous and fast forming for the R2R hot embossing process limits material flow during filling stage and results in significant springback during demolding stage. As a result, forming defects usually appear and the process window is very narrow which hinders the industrialization of this technology. This study developed a R2R hot embossing machine and proposed a shape preserving mechanism to extend the material filling time and realized the cooling effect during the demolding process. Comparative experiments were conducted on the R2R hot embossing process for micro-pyramid arrays to understand the effect of shape preserving mechanism. The influence of tension force and encapsulation angle to the forming quality was systematically analyzed. Furthermore, the influence of processing parameters has been investigated by using the one-variable-at-a-time method. Afterwards, a series of experiments based on the central composite design approach have been conducted for the analysis of variance and the establishment of empirical models of the R2R hot embossing process. As a result, the process window was extended by the shape preserving mechanism. More importantly, the feeding speed was improved from 0.5 m min-1 to 2.5 m min-1 for the large-area fabrication of micro-pyramid arrays, which is very attractive to the industrialization of this technology.

  19. The brightest galaxies in the first 700 Myr: Building Hubble's legacy of large area IR imaging for JWST and beyond

    Science.gov (United States)

    Trenti, Michele

    2017-08-01

    Hubble's WFC3 has been a game changer for the study of early galaxy formation in the first 700 Myr after the Big Bang. Reliable samples of sources to redshift z 11, which can be discovered only from space, are now constraining the evolution of the galaxy luminosity function into the epoch of reionization. Unexpectedly but excitingly, the recent spectroscopic confirmations of L>L* galaxies at z>8.5 demonstrate that objects brighter than our own Galaxy are already present 500 Myr after the Big Bang, creating a challenge to current theoretical/numerical models that struggle to explain how galaxies can grow so luminous so quickly. Yet, the existing HST observations do not cover sufficient area, nor sample a large enough diversity of environments to provide an unbiased sample of sources, especially at z 9-11 where only a handful of bright candidates are known. To double this currently insufficient sample size, to constrain effectively the bright-end of the galaxy luminosity function at z 9-10, and to provide targets for follow-up imaging and spectroscopy with JWST, we propose a large-area pure-parallel survey that will discover the Brightest of Reionizing Galaxies (BoRG[4JWST]). We will observe 580 arcmin^2 over 125 sightlines in five WFC3 bands (0.35 to 1.7 micron) using high-quality pure-parallel opportunities available in the cycle (3 orbits or longer). These public observations will identify more than 80 intrinsically bright galaxies at z 8-11, investigate the connection between halo mass, star formation and feedback in progenitors of groups and clusters, and build HST lasting legacy of large-area, near-IR imaging.

  20. CALCLENS: weak lensing simulations for large-area sky surveys and second-order effects in cosmic shear power spectra

    Science.gov (United States)

    Becker, Matthew R.

    2013-10-01

    I present a new algorithm, Curved-sky grAvitational Lensing for Cosmological Light conE simulatioNS (CALCLENS), for efficiently computing weak gravitational lensing shear signals from large N-body light cone simulations over a curved sky. This new algorithm properly accounts for the sky curvature and boundary conditions, is able to produce redshift-dependent shear signals including corrections to the Born approximation by using multiple-plane ray tracing and properly computes the lensed images of source galaxies in the light cone. The key feature of this algorithm is a new, computationally efficient Poisson solver for the sphere that combines spherical harmonic transform and multigrid methods. As a result, large areas of sky (˜10 000 square degrees) can be ray traced efficiently at high resolution using only a few hundred cores. Using this new algorithm and curved-sky calculations that only use a slower but more accurate spherical harmonic transform Poisson solver, I study the convergence, shear E-mode, shear B-mode and rotation mode power spectra. Employing full-sky E/B-mode decompositions, I confirm that the numerically computed shear B-mode and rotation mode power spectra are equal at high accuracy (≲1 per cent) as expected from perturbation theory up to second order. Coupled with realistic galaxy populations placed in large N-body light cone simulations, this new algorithm is ideally suited for the construction of synthetic weak lensing shear catalogues to be used to test for systematic effects in data analysis procedures for upcoming large-area sky surveys. The implementation presented in this work, written in C and employing widely available software libraries to maintain portability, is publicly available at http://code.google.com/p/calclens.