Common Sense Wordworking III: Desktop Publishing and Desktop Typesetting.

Science.gov (United States)

Crawford, Walt

1987-01-01

Describes current desktop publishing packages available for microcomputers and discusses the disadvantages, especially in cost, for most personal computer users. Also described is a less expensive alternative technology--desktop typesetting--which meets the requirements of users who do not need elaborate techniques for combining text and graphics.…

Desktop Publishing Made Simple.

Science.gov (United States)

Wentling, Rose Mary

1989-01-01

The author discusses the types of computer hardware and software necessary to set up a desktop publishing system, both for use in educational administration and for instructional purposes. Classroom applications of desktop publishing are presented. The author also provides guidelines for preparing to teach desktop publishing. (CH)

[Teaching Desktop] Video Conferencing in a Collaborative and Problem Based Setting

DEFF Research Database (Denmark)

Ørngreen, Rikke; Mouritzen, Per

2013-01-01

, teachers and assistant teachers wanted to find ways in the design for learning that enables the learners to acquire knowledge about the theories, models and concepts of the subject, as well as hands‐on competencies in a learning‐by‐doing manner. In particular we address the area of desktop video...... shows that the students experiment with various pedagogical situations, and that during the process of design, teaching, and reflection they acquire experiences at both a concrete specific and a general abstract level. The desktop video conference system creates challenges, with technical issues...

Desktop grid computing

CERN Document Server

Cerin, Christophe

2012-01-01

Desktop Grid Computing presents common techniques used in numerous models, algorithms, and tools developed during the last decade to implement desktop grid computing. These techniques enable the solution of many important sub-problems for middleware design, including scheduling, data management, security, load balancing, result certification, and fault tolerance. The book's first part covers the initial ideas and basic concepts of desktop grid computing. The second part explores challenging current and future problems. Each chapter presents the sub-problems, discusses theoretical and practical

Desktop Genetics

OpenAIRE

Hough, Soren H; Ajetunmobi, Ayokunmi; Brody, Leigh; Humphryes-Kirilov, Neil; Perello, Edward

2016-01-01

Desktop Genetics is a bioinformatics company building a gene-editing platform for personalized medicine. The company works with scientists around the world to design and execute state-of-the-art clustered regularly interspaced short palindromic repeats (CRISPR) experiments. Desktop Genetics feeds the lessons learned about experimental intent, single-guide RNA design and data from international genomics projects into a novel CRISPR artificial intelligence system. We believe that machine learni...

Desktop Publishing: A Brave New World and Publishing from the Desktop.

Science.gov (United States)

Lormand, Robert; Rowe, Jane J.

1988-01-01

The first of two articles presents basic selection criteria for desktop publishing software packages, including discussion of expectations, required equipment, training costs, publication size, desired software features, additional equipment needed, and quality control. The second provides a brief description of desktop publishing using the Apple…

Experimental Setup for Ultrasonic-Assisted Desktop Fused Deposition Modeling System

OpenAIRE

Maidin, S.; Muhamad, M. K.; Pei, Eujin

2014-01-01

Fused deposition modeling (FDM) is an additive manufacturing (AM) process that has been used in various manufacturing fields. However, the drawback of FDM is poor surface finish of part produced, leading to surface roughness and requires hand finishing. In this study, ultrasonic technology will be integrated into a desktop FDM system. Ultrasound has been applied in various conventional machining process and shows good machined surface finish. However, very little research regarding the applic...

Desktop Genetics.

Science.gov (United States)

Hough, Soren H; Ajetunmobi, Ayokunmi; Brody, Leigh; Humphryes-Kirilov, Neil; Perello, Edward

2016-11-01

Desktop Genetics is a bioinformatics company building a gene-editing platform for personalized medicine. The company works with scientists around the world to design and execute state-of-the-art clustered regularly interspaced short palindromic repeats (CRISPR) experiments. Desktop Genetics feeds the lessons learned about experimental intent, single-guide RNA design and data from international genomics projects into a novel CRISPR artificial intelligence system. We believe that machine learning techniques can transform this information into a cognitive therapeutic development tool that will revolutionize medicine.

EURISOL-DS Multi-MW Target: Experimental program associated to validation of CFD simulations of the mercury loop

CERN Document Server

Blumenfeld, Laure; Kadi, Yacine; Samec, Karel; Lindroos, Mats

At the core of the Eurisol project facility, the neutron source produces spallation neutrons from a proton beam impacting dense liquid. The liquid circulates at high speed inside the source, a closed vessel with beam windows.This technical note summarises the needed of the hydraulic METEX 1 and METEX 2 data tests to contribute to validate CFD turbulent simulation of liquid metal with the LES model and FEM structural model as well as a-dimensional analysis of Laser Dopplet Velocimetry for cavitation measurements.

A Desktop Virtual Reality Earth Motion System in Astronomy Education

Science.gov (United States)

Chen, Chih Hung; Yang, Jie Chi; Shen, Sarah; Jeng, Ming Chang

2007-01-01

In this study, a desktop virtual reality earth motion system (DVREMS) is designed and developed to be applied in the classroom. The system is implemented to assist elementary school students to clarify earth motion concepts using virtual reality principles. A study was conducted to observe the influences of the proposed system in learning.…

Instant Citrix XenDesktop 5 starter

CERN Document Server

Magdy, Mahmoud

2013-01-01

Get to grips with a new technology, understand what it is and what it can do for you, and then get to work with the most important features and tasks. This easy-to-follow, hands-on guide shows you how to implement desktop virtualization with real life cases and step-by-step instructions. It is a tutorial with step-by-step instructions and adequate screenshots for the installation and administration of Citrix XenDesktop.If you are new to XenDesktop or are looking to build your skills in desktop virtualization, this is your step-by-step guide to learning Citrix XenDesktop. For those architects a

Linux Desktop Pocket Guide

CERN Document Server

Brickner, David

2005-01-01

While Mac OS X garners all the praise from pundits, and Windows XP attracts all the viruses, Linux is quietly being installed on millions of desktops every year. For programmers and system administrators, business users, and educators, desktop Linux is a breath of fresh air and a needed alternative to other operating systems. The Linux Desktop Pocket Guide is your introduction to using Linux on five of the most popular distributions: Fedora, Gentoo, Mandriva, SUSE, and Ubuntu. Despite what you may have heard, using Linux is not all that hard. Firefox and Konqueror can handle all your web bro

Desktop Publishing for Counselors.

Science.gov (United States)

Lucking, Robert; Mitchum, Nancy

1990-01-01

Discusses the fundamentals of desktop publishing for counselors, including hardware and software systems and peripherals. Notes by using desktop publishing, counselors can produce their own high-quality documents without the expense of commercial printers. Concludes computers present a way of streamlining the communications of a counseling…

Eurisol-DS Multi-MW target A proposal for improving overall performance in relation to the isotope yield

CERN Document Server

Samec, K; Kadi, Yacine; Rocca, Roberto; Kharoua, Cyril

2008-01-01

The Eurisol Design Study has been initiated by the European Commission to demonstrate the feasibility of a facility for producing large yields of exotic isotopes. At the core of the projected facility, the neutron source produces spallation neutrons from a proton beam impacting dense liquid metal. The neutrons emitted from the source are used to fission Uranium targets which, in turn, produce high yields of isotopes. This technical report summarises efforts to improve the overall performance of the planned facility, by optimising the neutron source and the disposition of the fission targets.

EURISOL-DS Multi-MW Target. A proposal for improving overall performance in relation to the isotope yield

CERN Document Server

Karel Samec, Mats Lindroos, Yacine Kadi,Roberto Rocca, Cyril KharouaAB Dept. ATB

The Eurisol Design Study has been initiated by the European Commission to demonstratethe feasibility of a facility for producing large yields of exotic isotopes.At the core of the projected facility, the neutron source produces spallation neutrons from aproton beam impacting dense liquid metal. The neutrons emitted from the source are usedto fission Uranium targets which, in turn, produce high yields of isotopes.This technical report summarises efforts to improve the overall performance of the plannedfacility, by optimising the neutron source and the disposition of the fission targets.

Basics of Desktop Publishing. Second Edition.

Science.gov (United States)

Beeby, Ellen; Crummett, Jerrie

This document contains teacher and student materials for a basic course in desktop publishing. Six units of instruction cover the following: (1) introduction to desktop publishing; (2) desktop publishing systems; (3) software; (4) type selection; (5) document design; and (6) layout. The teacher edition contains some or all of the following…

Choosing the Right Desktop Publisher.

Science.gov (United States)

Eiser, Leslie

1988-01-01

Investigates the many different desktop publishing packages available today. Lists the steps to desktop publishing. Suggests which package to use with specific hardware available. Compares several packages for IBM, Mac, and Apple II based systems. (MVL)

Development of the EURISOL Multi-Megawatt Target Station (2005-2009): Executive Summary

CERN Document Server

Karel Samec et al. (CERN, IPUL, ITN and PSI)

Advances in nano-technology, bio-technology, nuclear medicine and the fundamental sciences require a facility to continue improving current capabilities in Europe beyond the year 2010. European competitiveness could benefit greatly from a unique research facility, flexible enough to satisfy users from many different fields of science and technology. The facility would be a valuable asset enabling economies of scale and giving Europe access to cutting-edge technology at the heart of future technological advances of major economic importance. Specialised facilities already operating at full capacity such as SINQ in Switzerland, ILL in France, have demonstrated the benefits of bringing together users from different scientific backgrounds and different countries. Such a research policy may be reinforced by the improved performance and greater reach of the EURISOL project which is aimed at a larger research community. Beneficiaries include the medical sciences such as oncology, medical imagery or studies of protei...

Desktop Publishing Choices: Making an Appropriate Decision.

Science.gov (United States)

Crawford, Walt

1991-01-01

Discusses various choices available for desktop publishing systems. Four categories of software are described, including advanced word processing, graphics software, low-end desktop publishing, and mainstream desktop publishing; appropriate hardware is considered; and selection guidelines are offered, including current and future publishing needs,…

Mercury purification in the megawatt liquid metal spallation target of EURISOL-DS

CERN Document Server

Neuhausen, Joerg; Eller, Martin; Schumann, Dorothea; Eichler, Bernd; Horn, Susanne

High power spallation targets are going to be used extensively in future research and technical facilities such as spallation neutron sources, neutrino factories, radioactive beam facilities or accelerator driven systems for the transmutation of long-lived nuclear waste. Within EURISOL-DS, a 4 MW liquid metal spallation target is designed to provide neutrons for a fission target, where neutron rich radionuclides will be produced. For the spallation target, mercury is planned to be used as target material. A large amount of radionuclides ranging from atomic number Z=1 to 81 will be produced in the liquid metal during long term irradiation. It is planned to remove those radionuclides by chemical or physicochemical methods to reduce its radioactivity. For the development of a purification procedure, knowledge about the chemical state of the different elements present in the mixture is required. We present a general concept of applicable separation techniques in a target system and show some results of experiment...

Desktop Publishing: Changing Technology, Changing Occupations.

Science.gov (United States)

Stanton, Michael

1991-01-01

Describes desktop publishing (DTP) and its place in corporations. Lists job titles of those working in desktop publishing and describes DTP as it is taught at secondary and postsecondary levels and by private trainers. (JOW)

EURISOL-DS Multi-MW Target: Thermal Behaviour of the fission target disk arrangement inspired by the MAFF project

CERN Document Server

Cyril Kharoua, Yacine Kadi and the EURISOL-DS Task#2 collaboration

This technical note summarises the design calculations performed within Task #2 of the European Isotope Separation On-Line Radioactive Ion Beam Facility Design Study (EURISOL-DS) [1] for the thermal behaviour of the fission target.A preliminary study was carried out in order to determine the heat deposition within the fissile material and estimate the temperature rise. This new solution takes into account the problems related to effusion/diffusion of radioactive isotopes inside a thick target. To enhance the extraction rates and the thermal behaviour it is proposed to study a solution where the fissile material is split into an arrangement of disks.

The Point Lepreau Desktop Simulator

International Nuclear Information System (INIS)

MacLean, M.; Hogg, J.; Newman, H.

1997-01-01

The Point Lepreau Desktop Simulator runs plant process modeling software on a 266 MHz single CPU DEC Alpha computer. This same Alpha also runs the plant control computer software on an SSCI 125 emulator. An adjacent Pentium PC runs the simulator's Instructor Facility software, and communicates with the Alpha through an Ethernet. The Point Lepreau Desktop simulator is constructed to be as similar as possible to the Point Lepreau full scope training simulator. This minimizes total maintenance costs and enhances the benefits of the desktop simulator. Both simulators have the same modeling running on a single CPU in the same schedule of calculations. Both simulators have the same Instructor Facility capable of developing and executing the same lesson plans, doing the same monitoring and control of simulations, inserting all the same malfunctions, performing all the same overrides, capable of making and restoring all the same storepoints. Both simulators run the same plant control computer software - the same assembly language control programs as the power plant uses for reactor control, heat transport control, annunciation, etc. This is a higher degree of similarity between a desktop simulator and a full scope training simulator than previously reported for a computer controlled nuclear plant. The large quantity of control room hardware missing from the desktop simulator is replaced by software. The Instructor Facility panel override software of the training simulator provides the means by which devices (switches, controllers, windows, etc.) on the control room panels can be controlled and monitored in the desktop simulator. The CRT of the Alpha provides a mouse operated DCC keyboard mimic for controlling the plant control computer emulation. Two emulated RAMTEK display channels appear as windows for monitoring anything of interest on plant DCC displays, including one channel for annunciation. (author)

Promises and Realities of Desktop Publishing.

Science.gov (United States)

Thompson, Patricia A.; Craig, Robert L.

1991-01-01

Examines the underlying assumptions of the rhetoric of desktop publishing promoters. Suggests four criteria to help educators provide insights into issues and challenges concerning desktop publishing technology that design students will face on the job. (MG)

Making the Leap to Desktop Publishing.

Science.gov (United States)

Schleifer, Neal

1986-01-01

Describes one teacher's approach to desktop publishing. Explains how the Macintosh and LaserWriter were used in the publication of a school newspaper. Guidelines are offered to teachers for the establishment of a desktop publishing lab. (ML)

Activation calculation of the EURISOL mercury target

Energy Technology Data Exchange (ETDEWEB)

Rapp, B.; David, J.C.; Blideanu, V.; Dore, D.; Ridikas, D.; Thiolliere, N

2006-08-15

We have used MCNPX coupled to CINDER to estimate the production of radioactive nuclides in the EURISOL 4 MW liquid mercury target during a 40 years'lifetime of the installation. The calculations have been done with different intra-nuclear cascade and fission evaporation model combinations. A benchmark exercise has allowed a better understanding of differences seen between these models for the creation of tritium and fission products. To obtain a realistic production yield for tritium gas in proton induced spallation reactions, we recommend using the ISABEL-RAL model, while both CEM2k and BERTINI-RAL overestimate the production rate above 1 GeV incident proton. The best combinations of models to calculate the residual nuclei production are those using ABLA fission-evaporation model, CEM2k or combinations using RAL model are giving too broad mass distributions when compared to available data. An extensive list of radio-nuclides was obtained and is available on tabular format, we show that the 4 nuclei whose contributions to the total activity of the mercury target (after 40 years of irradiation) are the most important are the following: -) 1 day after shutdown: Y{sup 91} (15%), Y{sup 90} (13%), Hg{sup 197} (6%) and Sr{sup 89} (5%); -) 1 year after shutdown: H{sup 3} (19%), Y{sup 90} (17%), Sr{sup 90} (17%) and Nb{sup 93*} (10%); -) 10 years after shutdown: Y{sup 90} (22%), Sr{sup 90} (22%), H{sup 3} (18%) and Nb{sup 93*} (14%); and -) 100 years after shutdown: Mo{sup 93} (34%), Nb{sup 93*} (32%), Pt{sup 193} (9%) and Y{sup 90} (8%). (A.C.)

Evaluating virtual hosted desktops for graphics-intensive astronomy

Science.gov (United States)

Meade, B. F.; Fluke, C. J.

2018-04-01

Visualisation of data is critical to understanding astronomical phenomena. Today, many instruments produce datasets that are too big to be downloaded to a local computer, yet many of the visualisation tools used by astronomers are deployed only on desktop computers. Cloud computing is increasingly used to provide a computation and simulation platform in astronomy, but it also offers great potential as a visualisation platform. Virtual hosted desktops, with graphics processing unit (GPU) acceleration, allow interactive, graphics-intensive desktop applications to operate co-located with astronomy datasets stored in remote data centres. By combining benchmarking and user experience testing, with a cohort of 20 astronomers, we investigate the viability of replacing physical desktop computers with virtual hosted desktops. In our work, we compare two Apple MacBook computers (one old and one new, representing hardware and opposite ends of the useful lifetime) with two virtual hosted desktops: one commercial (Amazon Web Services) and one in a private research cloud (the Australian NeCTAR Research Cloud). For two-dimensional image-based tasks and graphics-intensive three-dimensional operations - typical of astronomy visualisation workflows - we found that benchmarks do not necessarily provide the best indication of performance. When compared to typical laptop computers, virtual hosted desktops can provide a better user experience, even with lower performing graphics cards. We also found that virtual hosted desktops are equally simple to use, provide greater flexibility in choice of configuration, and may actually be a more cost-effective option for typical usage profiles.

Studies on the benefit of extended capabilities of the driver accelerator for EURISOL

CERN Document Server

Schmidt, K.-H; Lukic, S; Ricciardi, M. V; Veselsky, M

Possibilities are studied for the optimization of EURISOL rare nuclide yields in specific regions of the nuclear chart by building the driver accelerator in a way that enables accelerating several additional beam species, to specific energies, besides the baseline 1 GeV proton beam. Nuclide production rates with these driver beams are compared to the production rates expected with the 1 GeV proton beam in the direct-production and the high-power-converter scenarios. Arguments are presented to show that several additional driver-beam scenarios could provide substantial benefit for the production of nuclides in specific regions of the nuclear chart. The quantitative values in this report are preliminary in the sense that they depend on assumptions on the values of some key parameters which are subject to technical development, e.g. maximum beam intensities or limits on the target heat load. The different scenarios are compared from the aspect of nuclide yields. The arguments presented here, when complemented by...

Technical Writing Teachers and the Challenges of Desktop Publishing.

Science.gov (United States)

Kalmbach, James

1988-01-01

Argues that technical writing teachers must understand desktop publishing. Discusses the strengths that technical writing teachers bring to desktop publishing, and the impact desktop publishing will have on technical writing courses and programs. (ARH)

Desktop Publishing for the Gifted/Talented.

Science.gov (United States)

Hamilton, Wayne

1987-01-01

Examines the nature of desktop publishing and how it can be used in the classroom for gifted/talented students. Characteristics and special needs of such students are identified, and it is argued that desktop publishing addresses those needs, particularly with regard to creativity. Twenty-six references are provided. (MES)

Telemedicine in rural areas. Experience with medical desktop-conferencing via satellite.

Science.gov (United States)

Ricke, J; Kleinholz, L; Hosten, N; Zendel, W; Lemke, A; Wielgus, W; Vöge, K H; Fleck, E; Marciniak, R; Felix, R

1995-01-01

Cooperation between physicians in hospitals in rural areas can be assisted by desktop-conferencing using a satellite link. For six weeks, medical desktop-conferencing was tested during daily clinical conferences between the Virchow-Klinikum, Berlin, and the Medical Academy, Wroclaw. The communications link was provided by the German Telekom satellite system MCS, which allowed temporary connections to be established on demand by manual dialling. Standard hardware and software were used for videoconferencing, as well as software for medical communication developed in the BERMED project. Digital data, such as computed tomography or magnetic resonance images, were transmitted by a digital data channel in parallel to the transmission of analogue video and audio signals. For conferences involving large groups of people, hardware modifications were required. These included the installation of a video projector, adaptation of the audio system with improved echo cancellation, and installation of extra microphones. Learning to use an unfamiliar communication medium proved to be uncomplicated for the participating physicians.

Desktop Publishing.

Science.gov (United States)

Stanley, Milt

1986-01-01

Defines desktop publishing, describes microcomputer developments and software tools that make it possible, and discusses its use as an instructional tool to improve writing skills. Reasons why students' work should be published, examples of what to publish, and types of software and hardware to facilitate publishing are reviewed. (MBR)

The Printout: Desktop Pulishing in the Classroom.

Science.gov (United States)

Balajthy, Ernest; Link, Gordon

1988-01-01

Reviews software available to the classroom teacher for desktop publishing and describes specific classroom activities. Suggests using desktop publishing to produce large print texts for students with limited sight or for primary students.(NH)

Semantic document architecture for desktop data integration and management

OpenAIRE

Nesic, Sasa; Jazayeri, Mehdi

2011-01-01

Over the last decade, personal desktops have faced the problem of information overload due to increasing computational power, easy access to the Web and cheap data storage. Moreover, an increasing number of diverse end-user desktop applications have led to the problem of information fragmentation. Each desktop application has its own data, unaware of related and relevant data in other applications. In other words, personal desktops face a lack of interoperability of data managed by differ...

EURISOL-DS Multi-MWatt Hg Target: Neutron flux and fission rate calculations for the MAFF configuration

CERN Document Server

Romanets, Y; Vaz, P; Herrera-Martinez, A; Kadi, Y; Kharoua, C; Lettry, J; Lindroos, M

The EURISOL (The EURopean Isotope Separation On-Line Radioactive Ion Beam) project aims at producing high intensity radioactive ion beams produced by neutron induced fission on a fissile target (235U) surrounding a liquid mercury converter. A proton beam of 1 GeV and 4 MW impinges on the Hg converter generating by spallation reactions high neutron fluxes. In this work the state-of-the-art Monte Carlo codes MCNPX and FLUKA were used to assess the neutronics performance of the system which geometry, inspired from the MAFF concept, allows a versatile manipulation of the fission targets. The objective of the study was to optimize the geometry of the system and the materials used in the fuel and reflector elements of the system, in order to achieve the highest possible fission rate.

The Virtual Desktop: Options and Challenges in Selecting a Secure Desktop Infrastructure Based on Virtualization

Science.gov (United States)

2011-10-01

the virtual desktop environment still functions for the users associated with it. Users can access the virtual desktop through the local network and...technologie de virtualisation du poste de travail peut contribuer à combler les besoins de partage de l’information sécuritaire au sein du MDN. Le... virtualisation . Il englobe un aperçu de la virtualisation d’un poste de travail, y compris un examen approfondi de deux architectures différentes : le

Innovative Waste Management in the Mercury Loop of the EURISOL Multi-MW Converter Target

CERN Document Server

PSI: Jörg Neuhausen, Dorothea Schumann, Rugard Dressler, Susanne Horn, Sabrina Lüthi, Stephan Heinitz, Suresh ChirikiCERN: Thierry Stora, Martin Eller

The choice of mercury as target material imposes various questions concerning the safe operation of such a system that are related to the physical and chemical properties of the target material itself and the nuclear reaction products produced within the target during its life time of several decades. Therefore, a subtask was created within the EURISOL-DS project that is concerned with studying an innovative waste management for the generated radioactivity by chemical means. Such a study strongly depends on the radioactive inventory and its distribution throughout the target and loop system. Radioactive inventory calculations were performed within task 5 [6]. The distribution of nuclear reaction products and their chemical state that can be expected within the target and loop system is one of the topics covered in this report. Based on the results obtained by theoretical studies as well as laboratory scale experiments, the feasibility of waste reduction using chemical methods, both conventional (e.g. leaching...

Desktop Technology for Newspapers: Use of the Computer Tool.

Science.gov (United States)

Wilson, Howard Alan

This work considers desktop publishing technology as a way used to paginate newspapers electronically, tracing the technology's development from the beginning of desktop publishing in the mid-1980s to the 1990s. The work emphasizes how desktop publishing technology is and can be used by weekly newspapers. It reports on a Pennsylvania weekly…

VMware Horizon 6 desktop virtualization solutions

CERN Document Server

Cartwright, Ryan; Langone, Jason; Leibovici, Andre

2014-01-01

If you are a desktop architect, solution provider, end-user consultant, virtualization engineer, or anyone who wants to learn how to plan and design the implementation of a virtual desktop solution based on Horizon 6, then this book is for you. An understanding of VMware vSphere fundamentals coupled with experience in the installation or administration of a VMware environment would be a plus during reading.

Desktop Publishing in a PC-Based Environment.

Science.gov (United States)

Sims, Harold A.

1987-01-01

Identifies, considers, and interrelates the functionality of hardware, firmware, and software types; discusses the relationship of input and output devices in the PC-based desktop publishing environment; and reports some of what has been experienced in three years of working intensively in/with desktop publishing devices and solutions. (MES)

Desktop Publishing as a Learning Resources Service.

Science.gov (United States)

Drake, David

In late 1988, Midland College in Texas implemented a desktop publishing service to produce instructional aids and reduce and complement the workload of the campus print shop. The desktop service was placed in the Media Services Department of the Learning Resource Center (LRC) for three reasons: the LRC was already established as a campus-wide…

System Testing of Desktop and Web Applications

Science.gov (United States)

Slack, James M.

2011-01-01

We want our students to experience system testing of both desktop and web applications, but the cost of professional system-testing tools is far too high. We evaluate several free tools and find that AutoIt makes an ideal educational system-testing tool. We show several examples of desktop and web testing with AutoIt, starting with simple…

EURISOL-DS Multi-MW Target Preliminary Study of the Liquid Metal Proton-to-Neutron Converter

CERN Document Server

Herrera-Martínez, A; CERN. Geneva. AB Department

2006-01-01

This technical note summarises the design calculations performed within Task #2 of the European Isotope Separation On-Line Radioactive Ion Beam Facility Design Study (EURISOL-DS) [1]. A preliminary study was carried out in order to determine the optimum value of relevant parameters in the target design. Different scenarios were simulated using the Monte Carlo code FLUKA [2]. Namely, sensitivity studies were performed to assess the impact of the projectile particle energy on the neutronics and energy deposition in the spallation target. The optimal target dimensions were also studied for every case as well as the proper target material for the liquid metal proton-to-neutron converter, since mercury and lead-bismuth eutectic are reasonable options. The effect of the beam width on the power densities was also evaluated, taking into account the geometrical limitations of the facility. Finally, a comparison between protons and deuterons as primary particles was performed, acknowledging the limitations of using FLU...

Desktop Publishing in Libraries.

Science.gov (United States)

Cisler, Steve

1987-01-01

Describes the components, costs, and capabilities of several desktop publishing systems, and examines their possible impact on work patterns within organizations. The text and graphics of the article were created using various microcomputer software packages. (CLB)

Beam dynamics study and superconducting triple spoke cavity design for the EURISOL driver

International Nuclear Information System (INIS)

Ponton, A.

2009-07-01

EURISOL will be the next generation source of intense radioactive ion beams. Its accelerator complex consists of a driver linac, a set of targets and sources and a post-accelerator linac which aims at supplying different experimental areas with the exotic ions. The presented study deals with the driver accelerator: a superconducting RF linac capable of accelerating different ion kinds (D + , 3 He 2+ and H - ) up to a maximal power of 4 MW. First beam dynamics studies pointed out a very good acceleration efficiency when triple spoke cavities working at a frequency of 352 MHz are used in the medium energy part (0.2 < beta < 0.4). Thanks to a novel geometry, the electromagnetic design of the proposed cavity leads to 33 MV/m and 72 mT for the peak electric field and magnetic induction respectively at an ambitious accelerating field of 8 MV/m. The beam transport was then simulated and optimized in the original layout and calculations were also performed considering an alternative, periodic solution, for the low energy part. The 'all-periodic' linac keeps the beam qualities better by strongly reducing the emittance growth and the halo formation. (author)

LCCP Desktop Application v1.0 Engineering Reference

Energy Technology Data Exchange (ETDEWEB)

Beshr, Mohamed [Univ. of Maryland, College Park, MD (United States); Aute, Vikrant [Univ. of Maryland, College Park, MD (United States)

2014-04-01

This Life Cycle Climate Performance (LCCP) Desktop Application Engineering Reference is divided into three parts. The first part of the guide, consisting of the LCCP objective, literature review, and mathematical background, is presented in Sections 2-4. The second part of the guide (given in Sections 5-10) provides a description of the input data required by the LCCP desktop application, including each of the input pages (Application Information, Load Information, and Simulation Information) and details for interfacing the LCCP Desktop Application with the VapCyc and EnergyPlus simulation programs. The third part of the guide (given in Section 11) describes the various interfaces of the LCCP code.

Citrix XenApp 7.5 desktop virtualization solutions

CERN Document Server

Paul, Andy

2014-01-01

If you are a Citrix® engineer, a virtualization consultant, or an IT project manager with prior experience of using Citrix XenApp® and related technologies for desktop virtualization and want to further explore the power of XenApp® for flawless desktop virtualization, then this book is for you.

EURISOL-DS Multi-MW Target Neutronic Calculations for the Baseline Configuration of the Multi-MW Target

CERN Document Server

Herrera-Martínez, A

2006-01-01

This document summarises the study performed within the Task #2 of the European Isotope Separation On-Line Radioactive Ion Beam Facility Design Study (EURISOL DS) [1] to design the Multi-MW proton-to-neutron converter. A preliminary study [2] was carried out in order to understand the nature of the interactions taking place in the proton-to-neutron converter and their impact on the design of the facility. Namely, the target dimensions and material composition, type of incident particle, its energy and the beam profile were analysed in the aforementioned technical note, and their optimum values were suggested in the conclusions. The present work is based on the results of the previous study and uses the same methodology, namely Monte Carlo simulations with FLUKA [3]. This note describes the performance of a Hg target design and addresses more detailed issues, such as the composition of the fission target and use of a neutron reflector. It also attempts to integrate those components together and estimate the wh...

Measurement and analysis of turbulent liquid metal flow in a high-power spallation neutron source-EURISOL

CERN Document Server

Samec, K; Blumenfeld, L; Kharoua, C; Dementjevs, S; Milenkovic, R Z

2011-01-01

The European Isotope Separation On-Line (EURISOL) design study completed in 2009 examined means of producing exotic nuclei for fundamental research. One of the critical components identified in the study was a high-power neutron spallation source in which a target material is impacted by a proton beam producing neutrons by a process known as spallation. Due to the high heat power deposition, liquid metal, in this case mercury, is the only viable choice as target material. Complex issues arise from the use of liquid metal. It is characterised by an unusually low Prandtl number and a higher thermal expansivity than conventional fluids. The turbulence structure in LM is thereby affected and still an object of intense research, hampered in part by measurement difficulties. The use of Computational Fluid Dynamics (CFD) allowed a satisfactory design for the neutron source to be found rapidly with little iteration. However it was feared that the development of the boundary layer and associated turbulence would not b...

Perception Analysis of Desktop and Mobile Service Website

Directory of Open Access Journals (Sweden)

Rizqiyatul Khoiriyah

2016-12-01

Full Text Available The research was conducted as a qualitative study of the website to deeper explore and examine the analysis of user perception of desktop and mobile website services. This research reviewed about user perception of desktop and mobile service website used by using qualitative methods adapted to WebQual and User Experience approach. This qualitative research refered to the theoretical reference written by Creswell (2014. The expected outcome is to know the user perceptions of the available services and information in the website along with the possibility of desktop and mobile gap arising from differences in the two services. These results can be used as a service model on the website of the user experience.

Desktop Publishing: A Powerful Tool for Advanced Composition Courses.

Science.gov (United States)

Sullivan, Patricia

1988-01-01

Examines the advantages of using desktop publishing in advanced writing classes. Explains how desktop publishing can spur creativity, call attention to the interaction between words and pictures, encourage the social dimensions of computing and composing, and provide students with practical skills. (MM)

Eurisol-DS Multi MW Target Preliminary Study of the Windlowless Transverse Film (WTF) Liquid Metal Proton-to Neutron Converter

CERN Document Server

Kadi, Y; Rocca, R; Samec, K

2008-01-01

This technical note summarises the design calculations performed within Task#2 of the European Isotope Separation On-Line Radioactive Ion Beam Facility Design Study (EURISOL-DS) for the WTF (Windowless Transverse Film) mercur converter. A preliminary study was carried out in order to determine the heat deposition within the mercury and estimate the mercury velocity needed in the film. The geometry used is based on previous analysis simulated using the Monte Carlo code FLUKA. The results of these calculations show the baseline parameters, which will be used for the detailed design. Particularly, with a 1 GeV proton beam with a $\\sigma$ ~2 mm Gaussian distribution on a 4x30x40cm long target and with a 5m/s velocity at the peak power density region seems a suitable solution.

A VM-shared desktop virtualization system based on OpenStack

Science.gov (United States)

Liu, Xi; Zhu, Mingfa; Xiao, Limin; Jiang, Yuanjie

2018-04-01

With the increasing popularity of cloud computing, desktop virtualization is rising in recent years as a branch of virtualization technology. However, existing desktop virtualization systems are mostly designed as a one-to-one mode, which one VM can only be accessed by one user. Meanwhile, previous desktop virtualization systems perform weakly in terms of response time and cost saving. This paper proposes a novel VM-Shared desktop virtualization system based on OpenStack platform. The paper modified the connecting process and the display data transmission process of the remote display protocol SPICE to support VM-Shared function. On the other hand, we propose a server-push display mode to improve user interactive experience. The experimental results show that our system performs well in response time and achieves a low CPU consumption.

Desktop Publishing in Education.

Science.gov (United States)

Hall, Wendy; Layman, J.

1989-01-01

Discusses the state of desktop publishing (DTP) in education today and describes the weaknesses of the systems available for use in the classroom. Highlights include document design and layout; text composition; graphics; word processing capabilities; a comparison of commercial and educational DTP packages; and skills required for DTP. (four…

EURISOL-DS Multi-MW Target Comparative Neutronic Performance of the Baseline Configuration vs. the Hg-Jet Option

CERN Document Server

Herrera-Martínez, A

2006-01-01

This technical report summarises the comparative study between several design options for the Multi-MW target station performed within Task #2 of the European Isotope Separation On-Line Radioactive Ion Beam Facility Design Study (EURISOL DS) [1]. Previous analyses were carried out, using the Monte Carlo code FLUKA [2], to determine optimal values for relevant parameters in the target design [3] and to analyse a preliminary Multi-MW target assembly configuration [4]. The second report showed that the aimed fission rates, i.e. ~1015 fissions/s, could be achieved with such a configuration. Nevertheless, a preliminary study of the target assembly integration [5] suggested reducing some of the dimensions. Moreover, the yields of specific isotopes have yet to be assessed and compared to other target configurations. This note presents a detailed comparison of the baseline configuration and the Hg-jet option, in terms of primary and neutron distribution, power densities and fission product yields. A scaled-down versi...

Desktop publishing com o scribus

OpenAIRE

Silva, Fabrício Riff; Uchôa, Kátia Cilene Amaral

2015-01-01

Este artigo apresenta um breve tutorial sobre Desktop Publishing, com ênfase no software livre Scribus, através da criação de um exemplo prático que explora algumas de suas principais funcionalidades.

Exploring Graphic Design. A Short Course in Desktop Publishing.

Science.gov (United States)

Stanley, MLG

This course in desktop publishing contains seven illustrated modules designed to meet the following objectives: (1) use a desktop publishing program to explore advanced topics in graphic design; (2) learn about typography and how to make design decisions on the use of typestyles; (3) learn basic principles in graphic communications and apply them…

FORMED: Bringing Formal Methods to the Engineering Desktop

Science.gov (United States)

2016-02-01

FORMED: BRINGING FORMAL METHODS TO THE ENGINEERING DESKTOP BAE SYSTEMS FEBRUARY 2016 FINAL TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE...This report is published in the interest of scientific and technical information exchange, and its publication does not constitute the Government’s...BRINGING FORMAL METHODS TO THE ENGINEERING DESKTOP 5a. CONTRACT NUMBER FA8750-14-C-0024 5b. GRANT NUMBER N/A 5c. PROGRAM ELEMENT NUMBER 63781D

Desktop aligner for fabrication of multilayer microfluidic devices.

Science.gov (United States)

Li, Xiang; Yu, Zeta Tak For; Geraldo, Dalton; Weng, Shinuo; Alve, Nitesh; Dun, Wu; Kini, Akshay; Patel, Karan; Shu, Roberto; Zhang, Feng; Li, Gang; Jin, Qinghui; Fu, Jianping

2015-07-01

Multilayer assembly is a commonly used technique to construct multilayer polydimethylsiloxane (PDMS)-based microfluidic devices with complex 3D architecture and connectivity for large-scale microfluidic integration. Accurate alignment of structure features on different PDMS layers before their permanent bonding is critical in determining the yield and quality of assembled multilayer microfluidic devices. Herein, we report a custom-built desktop aligner capable of both local and global alignments of PDMS layers covering a broad size range. Two digital microscopes were incorporated into the aligner design to allow accurate global alignment of PDMS structures up to 4 in. in diameter. Both local and global alignment accuracies of the desktop aligner were determined to be about 20 μm cm(-1). To demonstrate its utility for fabrication of integrated multilayer PDMS microfluidic devices, we applied the desktop aligner to achieve accurate alignment of different functional PDMS layers in multilayer microfluidics including an organs-on-chips device as well as a microfluidic device integrated with vertical passages connecting channels located in different PDMS layers. Owing to its convenient operation, high accuracy, low cost, light weight, and portability, the desktop aligner is useful for microfluidic researchers to achieve rapid and accurate alignment for generating multilayer PDMS microfluidic devices.

MELCOR/VISOR PWR desktop simulator

International Nuclear Information System (INIS)

With, Anka de; Wakker, Pieter

2010-01-01

Increasingly, there is a need for a learning support and training tool for nuclear engineers, utilities and students in order to broaden their understanding of advanced nuclear plant characteristics, dynamics, transients and safety features. Nuclear system analysis codes like ASTEC, RELAP5, RETRAN and MELCOR provide calculation results of and visualization tools can be used to graphically represent these results. However, for an efficient education and training a more interactive tool such as a simulator is needed. The simulator connects the graphical tool with the calculation tool in an interactive manner. A small number of desktop simulators exist [1-3]. The existing simulators are capable of representing different types of power plants and various accident conditions. However, they were found to be too general to be used as a reliable plant-specific accident analysis or training tool. A desktop simulator of the Pressurized Water Reactor (PWR) has been created under contract of the Dutch nuclear regulatory body (KFD). The desktop simulator is a software package that provides a close to real simulation of the Dutch nuclear power plant Borssele (KCB) and is used for training of the accident response. The simulator includes the majority of the power plant systems, necessary for the successful simulation of the KCB plant during normal operation, malfunctions and accident situations, and it has been successfully validated against the results of the safety evaluations from the KCB safety report. (orig.)

The desktop interface in intelligent tutoring systems

Science.gov (United States)

Baudendistel, Stephen; Hua, Grace

1987-01-01

The interface between an Intelligent Tutoring System (ITS) and the person being tutored is critical to the success of the learning process. If the interface to the ITS is confusing or non-supportive of the tutored domain, the effectiveness of the instruction will be diminished or lost entirely. Consequently, the interface to an ITS should be highly integrated with the domain to provide a robust and semantically rich learning environment. In building an ITS for ZetaLISP on a LISP Machine, a Desktop Interface was designed to support a programming learning environment. Using the bitmapped display, windows, and mouse, three desktops were designed to support self-study and tutoring of ZetaLISP. Through organization, well-defined boundaries, and domain support facilities, the desktops provide substantial flexibility and power for the student and facilitate learning ZetaLISP programming while screening the student from the complex LISP Machine environment. The student can concentrate on learning ZetaLISP programming and not on how to operate the interface or a LISP Machine.

Perception Analysis of Desktop and Mobile Service Website

OpenAIRE

Khoiriyah, Rizqiyatul

2016-01-01

The research was conducted as a qualitative study of the website to deeper explore and examine the analysis of user perception of desktop and mobile website services. This research reviewed about user perception of desktop and mobile service website used by using qualitative methods adapted to WebQual and User Experience approach. This qualitative research refered to the theoretical reference written by Creswell (2014). The expected outcome is to know the user perceptions of the available ser...

Desktop Publishing: Organizational Considerations for Adoption and Implementation. TDC Research Report No. 6.

Science.gov (United States)

Lee, Paul

This report explores the implementation of desktop publishing in the Minnesota Extension Service (MES) and provides a framework for its implementation in other organizations. The document begins with historical background on the development of desktop publishing. Criteria for deciding whether to purchase a desktop publishing system, advantages and…

Integrasi pemrograman web pada pemrograman desktop sebagai alternatif fasilitas laporan dalam pengembangan program aplikasi

Directory of Open Access Journals (Sweden)

Mardainis Mardainis

2017-11-01

Full Text Available AbstrakPemrograman Desktop adalah program aplikasi yang mampu beroperasi tanpa mengandalkan jaringan internet. Penggunaan program desktop biasanya digunakan untuk membuat program yang akan dioperasikan tanpa memerlukan jaringan internet dengan area kerja berada disatu lokasi saja. Sedangkan program web pemakaiannya sangat bergantung pada jaringan internet agar bisa menghubungkan antar pengguna. Pilihan menggunakan program desktop atau program berbasis Web ditentukan oleh kebutuhan dan implementasinya. Jika implementasinya hanya untuk lingkungan perusahaan yang berada di satu tempat, program sebaiknya menggunakan program berbasis desktop. Namun, jika perusahaan memiliki lokasi terpisah di beberapa daerah, penggunaan program berbasis web lebih tepat. Namun banyak programmer, terutama pemula yang enggan menggunakan pemrograman desktop karena dalam membuat laporan harus menggunakan aplikasi pembuat laporan khusus seperti Crystal Report. Kesulitan yang dialami untuk menggunakan aplikasi khusus ini adalah tidak tersedianya aplikasi dalam sistem sehingga perlu diadakan secara khusus. Dalam membuat laporan kadang dirasa agak rumit karena tampilan laporan harus diseting secara manual. Sedangkan dalam bahasa pemrograman berbasis web untuk menampilkan informasi bisa langsung dibuat dengan mudah dalam program itu sendiri tanpa harus menggunakan aplikasi tambahan. Jadi membuat laporan dengan program berbasis web lebih mudah. Untuk menghindari kesulitan para pemrogram dalam membuat laporan tentang program desktop, peneliti mengintegrasikan program berbasis Web dengan pemrograman berbasis desktop dengan tujuan mempermudah membuat laporan. Kata kunci:  Pemrograman Desktop, Implementasi, Integrasi, Crystal Report.  AbstractDesktop Programming is an application programmer capable of operating without relying on the internet network. The use of desktop programs is usually used to create a program that will be operated without the need for internet network with

MedlinePlus® Everywhere: Access from Your Phone, Tablet or Desktop

Science.gov (United States)

... responsivefull.html MedlinePlus® Everywhere: Access from Your Phone, Tablet or Desktop To use the sharing features on ... provide a consistent user experience from a desktop, tablet, or phone. All users, regardless of how they ...

A Course in Desktop Publishing.

Science.gov (United States)

Somerick, Nancy M.

1992-01-01

Describes "Promotional Publications," a required course for public relations majors, which teaches the basics of desktop publishing. Outlines how the course covers the preparation of publications used as communication tools in public relations, advertising, and organizations, with an emphasis upon design, layout, and technology. (MM)

Adobe AIR, Bringing Rich Internet Applications to the Desktop

OpenAIRE

Vieriu, Valentin; Tuican, Catalin

2009-01-01

Rich Internet Applications are the new trend in software development today. Adobe AIR offers the possibility to create cross-platform desktop applications using popular Web technologies like HTML, JavaScript, Flash and Flex. This article is focused on presenting the advantages that this new environment has to offer for the web development community and how quickly you can develop a desktop application using Adobe AIR.

A NICE approach to managing large numbers of desktop PC's

International Nuclear Information System (INIS)

Foster, David

1996-01-01

The problems of managing desktop systems are far from resolved. As we deploy increasing numbers of systems, PC's Mackintoshes and UN*X Workstations. This paper will concentrate on the solution adopted at CERN for the management of the rapidly increasing numbers of desktop PC's in use in all parts of the laboratory. (author)

Adobe AIR, Bringing Rich Internet Applications to the Desktop

Directory of Open Access Journals (Sweden)

Valentin Vieriu

2009-01-01

Full Text Available Rich Internet Applications are the new trend in software development today. Adobe AIR offers the possibility to create cross-platform desktop applications using popular Web technologies like HTML, JavaScript, Flash and Flex. This article is focused on presenting the advantages that this new environment has to offer for the web development community and how quickly you can develop a desktop application using Adobe AIR.

Desktop Virtualization: Applications and Considerations

Science.gov (United States)

Hodgman, Matthew R.

2013-01-01

As educational technology continues to rapidly become a vital part of a school district's infrastructure, desktop virtualization promises to provide cost-effective and education-enhancing solutions to school-based computer technology problems in school systems locally and abroad. This article outlines the history of and basic concepts behind…

Full-scope nuclear training simulator -brought to the desktop

International Nuclear Information System (INIS)

LaPointe, D.J.; Manz, A.; Hall, G.S.

1997-01-01

RighTSTEP is a suite of simulation software which has been initially designed to facilitate upgrade of Ontario Hydro's full-scope simulators, but is also adaptable to a variety of other roles. it is presently being commissioned at Bruch A Training Simulator and has seen preliminary use in desktop and classroom roles. Because of the flexibility of the system, we anticipate it will see common use in the corporation for full-scope simulation roles. A key reason for developing RighTSTEP (Real Time Simulator Technology Extensible and Portable) was the need to modernize and upgrade the full-scope training simulator while protecting the investment in modelling code. This modelling code represents the end product of 18 years of evolution from the beginning of its development in 1979. Bringing this modelling code to a modern and more useful framework - the combination of simulator host, operating system, and simulator operating system - also could provide many spin-off benefits. The development (and first implementation) of the righTSTEP system was cited for saving the corporation 5.6M$ and was recognized by a corporate New Technology Award last year. The most important spin-off from this project has been the desktop version of the full-scope simulator. The desktop simulator uses essentially the same software as does its full-scope counterpart, and may be used for a variety of new purposes. Classroom and individual simulator training can now be easily accommodated since a desktop simulator is both affordable and relatively ease to use. Further, a wide group of people can be trained using the desktop simulator: by contrast the full-scope simulators were almost exclusively devoted to front-line operating staff. The desktop is finding increasing use in support of engineering applications, resulting from its easy accessibility, breadth of station systems represented, and tools for analysis and viewing. As further plant models are made available on the new simulator platform and

Desktop Publishing in the University.

Science.gov (United States)

Burstyn, Joan N., Ed.

Highlighting changes in the work of people within the university, this book presents nine essays that examine the effects of desktop publishing and electronic publishing on professors and students, librarians, and those who work at university presses and in publication departments. Essays in the book are: (1) "Introduction: The Promise of Desktop…

A desktop PRA

International Nuclear Information System (INIS)

Dolan, B.J.; Weber, B.J.

1989-01-01

This paper reports that Duke Power Company has completed full-scope PRAs for each of its nuclear stations - Oconee, McGuire and Catawba. These living PRAs are being maintained using desktop personal computers. Duke's PRA group now has powerful personal computer-based tools that have both decreased direct costs (computer analysis expenses) and increased group efficiency (less time to perform analyses). The shorter turnaround time has already resulted in direct savings through analyses provided in support of justification for continued station operation. Such savings are expected to continue with similar future support

Efficient Sustainable Operation Mechanism of Distributed Desktop Integration Storage Based on Virtualization with Ubiquitous Computing

Directory of Open Access Journals (Sweden)

Hyun-Woo Kim

2015-06-01

Full Text Available Following the rapid growth of ubiquitous computing, many jobs that were previously manual have now been automated. This automation has increased the amount of time available for leisure; diverse services are now being developed for this leisure time. In addition, the development of small and portable devices like smartphones, diverse Internet services can be used regardless of time and place. Studies regarding diverse virtualization are currently in progress. These studies aim to determine ways to efficiently store and process the big data generated by the multitude of devices and services in use. One topic of such studies is desktop storage virtualization, which integrates distributed desktop resources and provides these resources to users to integrate into distributed legacy desktops via virtualization. In the case of desktop storage virtualization, high availability of virtualization is necessary and important for providing reliability to users. Studies regarding hierarchical structures and resource integration are currently in progress. These studies aim to create efficient data distribution and storage for distributed desktops based on resource integration environments. However, studies regarding efficient responses to server faults occurring in desktop-based resource integration environments have been insufficient. This paper proposes a mechanism for the sustainable operation of desktop storage (SODS for high operational availability. It allows for the easy addition and removal of desktops in desktop-based integration environments. It also activates alternative servers when a fault occurs within a system.

Effects of boundary-layer separation controllers on a desktop fume hood.

Science.gov (United States)

Huang, Rong Fung; Chen, Jia-Kun; Hsu, Ching Min; Hung, Shuo-Fu

2016-10-02

A desktop fume hood installed with an innovative design of flow boundary-layer separation controllers on the leading edges of the side plates, work surface, and corners was developed and characterized for its flow and containment leakage characteristics. The geometric features of the developed desktop fume hood included a rearward offset suction slot, two side plates, two side-plate boundary-layer separation controllers on the leading edges of the side plates, a slanted surface on the leading edge of the work surface, and two small triangular plates on the upper left and right corners of the hood face. The flow characteristics were examined using the laser-assisted smoke flow visualization technique. The containment leakages were measured by the tracer gas (sulphur hexafluoride) detection method on the hood face plane with a mannequin installed in front of the hood. The results of flow visualization showed that the smoke dispersions induced by the boundary-layer separations on the leading edges of the side plates and work surface, as well as the three-dimensional complex flows on the upper-left and -right corners of the hood face, were effectively alleviated by the boundary-layer separation controllers. The results of the tracer gas detection method with a mannequin standing in front of the hood showed that the leakage levels were negligibly small (≤0.003 ppm) at low face velocities (≥0.19 m/s).

Efficiency Sustainability Resource Visual Simulator for Clustered Desktop Virtualization Based on Cloud Infrastructure

Directory of Open Access Journals (Sweden)

Jong Hyuk Park

2014-11-01

Full Text Available Following IT innovations, manual operations have been automated, improving the overall quality of life. This has been possible because an organic topology has been formed among many diverse smart devices grafted onto real life. To provide services to these smart devices, enterprises or users use the cloud. Cloud services are divided into infrastructure as a service (IaaS, platform as a service (PaaS and software as a service (SaaS. SaaS is operated on PaaS, and PaaS is operated on IaaS. Since IaaS is the foundation of all services, algorithms for the efficient operation of virtualized resources are required. Among these algorithms, desktop resource virtualization is used for high resource availability when existing desktop PCs are unavailable. For this high resource availability, clustering for hierarchical structures is important. In addition, since many clustering algorithms show different percentages of the main resources depending on the desktop PC distribution rates and environments, selecting appropriate algorithms is very important. If diverse attempts are made to find algorithms suitable for the operating environments’ desktop resource virtualization, huge costs are incurred for the related power, time and labor. Therefore, in the present paper, a desktop resource virtualization clustering simulator (DRV-CS, a clustering simulator for selecting clusters of desktop virtualization clusters to be maintained sustainably, is proposed. The DRV-CS provides simulations, so that clustering algorithms can be selected and elements can be properly applied in different desktop PC environments through the DRV-CS.

Design Options for a Desktop Publishing Course.

Science.gov (United States)

Mayer, Kenneth R.; Nelson, Sandra J.

1992-01-01

Offers recommendations for development of an undergraduate desktop publishing course. Discusses scholastic level and prerequisites, purpose and objectives, instructional resources and methodology, assignments and evaluation, and a general course outline. (SR)

Empirical Analysis of Server Consolidation and Desktop Virtualization in Cloud Computing

Directory of Open Access Journals (Sweden)

Bao Rong Chang

2013-01-01

Full Text Available Physical server transited to virtual server infrastructure (VSI and desktop device to virtual desktop infrastructure (VDI have the crucial problems of server consolidation, virtualization performance, virtual machine density, total cost of ownership (TCO, and return on investments (ROI. Besides, how to appropriately choose hypervisor for the desired server/desktop virtualization is really challenging, because a trade-off between virtualization performance and cost is a hard decision to make in the cloud. This paper introduces five hypervisors to establish the virtual environment and then gives a careful assessment based on C/P ratio that is derived from composite index, consolidation ratio, virtual machine density, TCO, and ROI. As a result, even though ESX server obtains the highest ROI and lowest TCO in server virtualization and Hyper-V R2 gains the best performance of virtual machine management; both of them however cost too much. Instead the best choice is Proxmox Virtual Environment (Proxmox VE because it not only saves the initial investment a lot to own a virtual server/desktop infrastructure, but also obtains the lowest C/P ratio.

Basics of Desktop Publishing. Teacher Edition.

Science.gov (United States)

Beeby, Ellen

This color-coded teacher's guide contains curriculum materials designed to give students an awareness of various desktop publishing techniques before they determine their computer hardware and software needs. The guide contains six units, each of which includes some or all of the following basic components: objective sheet, suggested activities…

Microsoft Virtualization Master Microsoft Server, Desktop, Application, and Presentation Virtualization

CERN Document Server

Olzak, Thomas; Boomer, Jason; Keefer, Robert M

2010-01-01

Microsoft Virtualization helps you understand and implement the latest virtualization strategies available with Microsoft products. This book focuses on: Server Virtualization, Desktop Virtualization, Application Virtualization, and Presentation Virtualization. Whether you are managing Hyper-V, implementing desktop virtualization, or even migrating virtual machines, this book is packed with coverage on all aspects of these processes. Written by a talented team of Microsoft MVPs, Microsoft Virtualization is the leading resource for a full installation, migration, or integration of virtual syste

ADAM (Affordable Desktop Application Manager): a Unix desktop application manager

International Nuclear Information System (INIS)

Liebana, M.; Marquina, M.; Ramos, R.

1996-01-01

ADAM stands for Affordable Desktop Application Manager. It is a GUI developed at CERN with the aim to ease access to applications. The motivation to develop ADAM came from the unavailability of environments like COSE/CDE and their heavy resource consumption. ADAM has proven to be user friendly: new users are able to customize it to their needs in few minutes. Groups of users may share through ADAM a common application environment. ADAM also integrates the Unix and the PC world. PC users can excess Unix applications in the same way as their usual Windows applications. This paper describes all the ADAM features, how they are used at CERN Public Services, and the future plans for ADAM. (author)

Application of desktop computers in nuclear engineering education

International Nuclear Information System (INIS)

Graves, H.W. Jr.

1990-01-01

Utilization of desktop computers in the academic environment is based on the same objectives as in the industrial environment - increased quality and efficiency. Desktop computers can be extremely useful teaching tools in two general areas: classroom demonstrations and homework assignments. Although differences in emphasis exist, tutorial programs share many characteristics with interactive software developed for the industrial environment. In the Reactor Design and Fuel Management course at the University of Maryland, several interactive tutorial programs provided by Energy analysis Software Service have been utilized. These programs have been designed to be sufficiently structured to permit an orderly, disciplined solution to the problem being solved, and yet be flexible enough to accommodate most problem solution options

Cubby : Multiscreen Desktop VR Part III

NARCIS (Netherlands)

Djajadiningrat, J.P.; Gribnau, M.W.

2000-01-01

In this month's final episode of our 'Cubby: Multiscreen Desktop VR' trilogy we explain how you read the InputSprocket driver from part II, how you use it as input for the cameras from part I and how you calibrate the input device so that it leads to the correct head position.

Cubby : Multiscreen Desktop VR Part II

NARCIS (Netherlands)

Gribnau, M.W.; Djajadiningrat, J.P.

2000-01-01

In this second part of our 'Cubby: Multiscreen Desktop VR' trilogy, we will introduce you to the art of creating a driver to read an Origin Instruments Dynasight input device. With the Dynasight, the position of the head of the user is established so that Cubby can display the correct images on its

Working Inside The Box: An Example Of Google Desktop Search in a Forensic Examination

Directory of Open Access Journals (Sweden)

Timothy James LaTulippe

2011-12-01

Full Text Available Information and the technological advancements for which mankind develops with regards to its storage has increased tremendously over the past few decades. As the total amount of data stored rapidly increases in conjunction with the amount of widely available computer-driven devices being used, solutions are being developed to better harness this data. These types of advancements are continually assisting investigators and computer forensic examiners. One such application which houses copious amounts of fruitful data is the Google Desktop Search program. Coupled with tested and verified techniques, examiners can exploit the power of this application to cater to their investigative needs. Please find within a real world case example of these techniques and its subsequent outcome.

The File Sync Algorithm of the ownCloud Desktop Clients

CERN Multimedia

CERN. Geneva

2014-01-01

The ownCloud desktop clients provide file syncing between desktop machines and the ownCloud server, available for the important desktop platforms. This presentation will give an overview of the sync algorithm used by the clients to provide a fast, reliable and robust syncing experience for the users. It will describe the phases a sync run will go through and how it is triggered. It also will provide an insight on the algorithms that decided if a file is uploaded, downloaded or even deleted on either on the local machine or in the cloud. Some examples of non obvious situations in file syncing will be described and discussed. As the ownCloud sync protocol is based on the open standard WebDAV the resulting challenges and the solutions will be illustrated. Finally a couple of frequently proposed enhancements will be reviewed and assed for the future development of the ownCloud server and syncing clients.

EURISOL-DS multi-MW target unit: Neutronics performance and shielding assessment, dose rate and material activation calculations for the MAFF configuration

CERN Document Server

Romanets, Y; Kadi, Y; Luis, R; Goncalves, I F; Tecchio, L; Kharoua, C; Vaz, P; Ene, D; David, J C; Rocca, R; Negoita, F

2010-01-01

One of the objectives of the EURISOL (EURopean Isotope Separation On-Line Radioactive Ion Beam) Design Study consisted of providing a safe and reliable facility layout and design for the following operational parameters and characteristics: (a) a 4 MW proton beam of 1 GeV energy impinging on a mercury target (the converter); (b) high neutron fluxes (similar to 3 x 10(16) neutrons/s) generated by spallation reactions of the protons impinging in the converter and (c) fission rate on fissile U-235 targets in excess of 10(15) fissions/s. In this work, the state-of-the-art Monte Carlo codes MCNPX (Pelowitz, 2005) and FLUKA (Vlachoudis, 2009; Ferrari et al., 2008) were used to characterize the neutronics performance and to perform the shielding assessment (Herrera-Martinez and Kadi, 2006; Cornell, 2003) of the EURISOLTarget Unit and to provide estimations of dose rate and activation of different components, in view of the radiation safety assessment of the facility. Dosimetry and activation calculations were perfor...

EPA Region 8, Memo on Desktop Printer Ink Cartridges Policy & Voluntary Printer Turn-in

Science.gov (United States)

This memo requests EPA Region 8 users to voluntarily turn-in their desktop printers and notifies users of the Region 8 policy to not provide maintenance or ink and toner cartridges for desktop printers.

Warm Hearts/Cold Type: Desktop Publishing Arrives.

Science.gov (United States)

Kramer, Felix

1991-01-01

Describes desktop publishing (DTP) that may be suitable for community, activist, and nonprofit groups and discusses how it is changing written communication. Topics discussed include costs; laser printers; time savings; hardware and software selection; and guidelines to consider when establishing DTP capability. (LRW)

Desktop Publishing: The New Wave in Business Education.

Science.gov (United States)

Huprich, Violet M.

1989-01-01

Discusses the challenges of teaching desktop publishing (DTP); the industry is in flux with the software packages constantly being updated. Indicates that the demand for those with DTP skills is great. (JOW)

Research and implementation of a Web-based remote desktop image monitoring system

International Nuclear Information System (INIS)

Ren Weijuan; Li Luofeng; Wang Chunhong

2010-01-01

It studied and implemented an ISS (Image Snapshot Server) system based on Web, using Java Web technology. The ISS system consisted of client web browser and server. The server part could be divided into three modules as the screen shots software, web server and Oracle database. Screen shots software intercepted the desktop environment of the remote monitored PC and sent these pictures to a Tomcat web server for displaying on the web at real time. At the same time, these pictures were also saved in an Oracle database. Through the web browser, monitor person can view the real-time and historical desktop pictures of the monitored PC during some period. It is very convenient for any user to monitor the desktop image of remote monitoring PC. (authors)

Desktop Publishing: Things Gutenberg Never Taught You.

Science.gov (United States)

Bowman, Joel P.; Renshaw, Debbie A.

1989-01-01

Provides a desktop publishing (DTP) overview, including: advantages and disadvantages; hardware and software requirements; and future development. Discusses cost-effectiveness, confidentiality, credibility, effects on volume of paper-based communication, and the need for training in layout and design which DTP creates. Includes a glossary of DTP…

Investigation Methodology of a Virtual Desktop Infrastructure for IoT

Directory of Open Access Journals (Sweden)

Doowon Jeong

2015-01-01

Full Text Available Cloud computing for IoT (Internet of Things has exhibited the greatest growth in the IT market in the recent past and this trend is expected to continue. Many companies are adopting a virtual desktop infrastructure (VDI for private cloud computing to reduce costs and enhance the efficiency of their servers. As a VDI is widely used, threats of cyber terror and invasion are also increasing. To minimize the damage, response procedure for cyber intrusion on a VDI should be systematized. Therefore, we propose an investigation methodology for VDI solutions in this paper. Here we focus on a virtual desktop infrastructure and introduce various desktop virtualization solutions that are widely used, such as VMware, Citrix, and Microsoft. In addition, we verify the integrity of the data acquired in order that the result of our proposed methodology is acceptable as evidence in a court of law. During the experiment, we observed an error: one of the commonly used digital forensic tools failed to mount a dynamically allocated virtual disk properly.

Desktop publishing: a useful tool for scientists.

Science.gov (United States)

Lindroth, J R; Cooper, G; Kent, R L

1994-01-01

Desktop publishing offers features that are not available in word processing programs. The process yields an impressive and professional-looking document that is legible and attractive. It is a simple but effective tool to enhance the quality and appearance of your work and perhaps also increase your productivity.

Thomas Jefferson, Page Design, and Desktop Publishing.

Science.gov (United States)

Hartley, James

1991-01-01

Discussion of page design for desktop publishing focuses on the importance of functional issues as opposed to aesthetic issues, and criticizes a previous article that stressed aesthetic issues. Topics discussed include balance, consistency in text structure, and how differences in layout affect the clarity of "The Declaration of…

Desktop Virtualization in Action: Simplicity Is Power

Science.gov (United States)

Fennell, Dustin

2010-01-01

Discover how your institution can better manage and increase access to instructional applications and desktops while providing a blended learning environment. Receive practical insight into how academic computing virtualization can be leveraged to enhance education at your institution while lowering Total Cost of Ownership (TCO) and reducing the…

Desk-top publishing using IBM-compatible computers.

Science.gov (United States)

Grencis, P W

1991-01-01

This paper sets out to describe one Medical Illustration Departments' experience of the introduction of computers for desk-top publishing. In this particular case, after careful consideration of all the options open, an IBM-compatible system was installed rather than the often popular choice of an Apple Macintosh.

Correlation between National Influenza Surveillance Data and Search Queries from Mobile Devices and Desktops in South Korea.

Science.gov (United States)

Shin, Soo-Yong; Kim, Taerim; Seo, Dong-Woo; Sohn, Chang Hwan; Kim, Sung-Hoon; Ryoo, Seung Mok; Lee, Yoon-Seon; Lee, Jae Ho; Kim, Won Young; Lim, Kyoung Soo

2016-01-01

Digital surveillance using internet search queries can improve both the sensitivity and timeliness of the detection of a health event, such as an influenza outbreak. While it has recently been estimated that the mobile search volume surpasses the desktop search volume and mobile search patterns differ from desktop search patterns, the previous digital surveillance systems did not distinguish mobile and desktop search queries. The purpose of this study was to compare the performance of mobile and desktop search queries in terms of digital influenza surveillance. The study period was from September 6, 2010 through August 30, 2014, which consisted of four epidemiological years. Influenza-like illness (ILI) and virologic surveillance data from the Korea Centers for Disease Control and Prevention were used. A total of 210 combined queries from our previous survey work were used for this study. Mobile and desktop weekly search data were extracted from Naver, which is the largest search engine in Korea. Spearman's correlation analysis was used to examine the correlation of the mobile and desktop data with ILI and virologic data in Korea. We also performed lag correlation analysis. We observed that the influenza surveillance performance of mobile search queries matched or exceeded that of desktop search queries over time. The mean correlation coefficients of mobile search queries and the number of queries with an r-value of ≥ 0.7 equaled or became greater than those of desktop searches over the four epidemiological years. A lag correlation analysis of up to two weeks showed similar trends. Our study shows that mobile search queries for influenza surveillance have equaled or even become greater than desktop search queries over time. In the future development of influenza surveillance using search queries, the recognition of changing trend of mobile search data could be necessary.

Turbulence Visualization at the Terascale on Desktop PCs

KAUST Repository

Treib, M.; Burger, K.; Reichl, F.; Meneveau, C.; Szalay, A.; Westermann, R.

2012-01-01

is challenging on desktop computers. This is due to the extreme resolution of such fields, requiring memory and bandwidth capacities going beyond what is currently available. To overcome these limitations, we present a GPU system for feature-based turbulence

Randomized Trial of Desktop Humidifier for Dry Eye Relief in Computer Users.

Science.gov (United States)

Wang, Michael T M; Chan, Evon; Ea, Linda; Kam, Clifford; Lu, Yvonne; Misra, Stuti L; Craig, Jennifer P

2017-11-01

Dry eye is a frequently reported problem among computer users. Low relative humidity environments are recognized to exacerbate signs and symptoms of dry eye, yet are common in offices of computer operators. Desktop USB-powered humidifiers are available commercially, but their efficacy for dry eye relief has not been established. This study aims to evaluate the potential for a desktop USB-powered humidifier to improve tear-film parameters, ocular surface characteristics, and subjective comfort of computer users. Forty-four computer users were enrolled in a prospective, masked, randomized crossover study. On separate days, participants were randomized to 1 hour of continuous computer use, with and without exposure to a desktop humidifier. Lipid-layer grade, noninvasive tear-film breakup time, and tear meniscus height were measured before and after computer use. Following the 1-hour period, participants reported whether ocular comfort was greater, equal, or lesser than that at baseline. The desktop humidifier effected a relative difference in humidity between the two environments of +5.4 ± 5.0% (P .05). However, a relative increase in the median noninvasive tear-film breakup time of +4.0 seconds was observed in the humidified environment (P computer use.Trial registration no: ACTRN12617000326392.

Desktop Publishing: A New Frontier for Instructional Technologists.

Science.gov (United States)

Bell, Norman T.; Warner, James W.

1986-01-01

Discusses new possibilities that computers and laser printers offer instructional technologists. Includes a brief history of printed communications, a description of new technological advances referred to as "desktop publishing," and suggests the application of this technology to instructional tasks. (TW)

Stop the Presses! An Update on Desktop Publishing.

Science.gov (United States)

McCarthy, Robert

1988-01-01

Discusses educational applications of desktop publishing at the elementary, secondary, and college levels. Topics discussed include page design capabilities; hardware requirements; software; the production of school newsletters and newspapers; cost factors; writing improvement; university departmental publications; and college book publishing. A…

Testing the quality of images for permanent magnet desktop MRI systems using specially designed phantoms.

Science.gov (United States)

Qiu, Jianfeng; Wang, Guozhu; Min, Jiao; Wang, Xiaoyan; Wang, Pengcheng

2013-12-21

Our aim was to measure the performance of desktop magnetic resonance imaging (MRI) systems using specially designed phantoms, by testing imaging parameters and analysing the imaging quality. We designed multifunction phantoms with diameters of 18 and 60 mm for desktop MRI scanners in accordance with the American Association of Physicists in Medicine (AAPM) report no. 28. We scanned the phantoms with three permanent magnet 0.5 T desktop MRI systems, measured the MRI image parameters, and analysed imaging quality by comparing the data with the AAPM criteria and Chinese national standards. Image parameters included: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, signal-to-noise ratio (SNR), and image uniformity. The image parameters of three desktop MRI machines could be measured using our specially designed phantoms, and most parameters were in line with MRI quality control criterion, including: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, image uniformity and slice position accuracy. However, SNR was significantly lower than in some references. The imaging test and quality control are necessary for desktop MRI systems, and should be performed with the applicable phantom and corresponding standards.

Testing the quality of images for permanent magnet desktop MRI systems using specially designed phantoms

International Nuclear Information System (INIS)

Qiu, Jianfeng; Wang, Guozhu; Min, Jiao; Wang, Xiaoyan; Wang, Pengcheng

2013-01-01

Our aim was to measure the performance of desktop magnetic resonance imaging (MRI) systems using specially designed phantoms, by testing imaging parameters and analysing the imaging quality. We designed multifunction phantoms with diameters of 18 and 60 mm for desktop MRI scanners in accordance with the American Association of Physicists in Medicine (AAPM) report no. 28. We scanned the phantoms with three permanent magnet 0.5 T desktop MRI systems, measured the MRI image parameters, and analysed imaging quality by comparing the data with the AAPM criteria and Chinese national standards. Image parameters included: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, signal-to-noise ratio (SNR), and image uniformity. The image parameters of three desktop MRI machines could be measured using our specially designed phantoms, and most parameters were in line with MRI quality control criterion, including: resonance frequency, high contrast spatial resolution, low contrast object detectability, slice thickness, geometrical distortion, image uniformity and slice position accuracy. However, SNR was significantly lower than in some references. The imaging test and quality control are necessary for desktop MRI systems, and should be performed with the applicable phantom and corresponding standards. (paper)

Comparing Web Applications with Desktop Applications: An Empirical Study

DEFF Research Database (Denmark)

Pop, Paul

2002-01-01

In recent years, many desktop applications have been ported to the world wide web in order to reduce (multiplatform) development, distribution and maintenance costs. However, there is little data concerning the usability of web applications, and the impact of their usability on the total cost...... of developing and using such applications. In this paper we present a comparison of web and desktop applications from the usability point of view. The comparison is based on an empirical study that investigates the performance of a group of users on two calendaring applications: Yahoo!Calendar and Microsoft...... Calendar. The study shows that in the case of web applications the performance of the users is significantly reduced, mainly because of the restricted interaction mechanisms provided by current web browsers....

Digital video for the desktop

CERN Document Server

Pender, Ken

1999-01-01

Practical introduction to creating and editing high quality video on the desktop. Using examples from a variety of video applications, benefit from a professional's experience, step-by-step, through a series of workshops demonstrating a wide variety of techniques. These include producing short films, multimedia and internet presentations, animated graphics and special effects.The opportunities for the independent videomaker have never been greater - make sure you bring your understanding fully up to date with this invaluable guide.No prior knowledge of the technology is assumed, with explanati

Hydropower Regulatory and Permitting Information Desktop (RAPID) Toolkit

Energy Technology Data Exchange (ETDEWEB)

Levine, Aaron L [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-12-19

Hydropower Regulatory and Permitting Information Desktop (RAPID) Toolkit presentation from the WPTO FY14-FY16 Peer Review. The toolkit is aimed at regulatory agencies, consultants, project developers, the public, and any other party interested in learning more about the hydropower regulatory process.

Aquatic Habitats: Exploring Desktop Ponds. Teacher's Guide.

Science.gov (United States)

Barrett, Katharine; Willard, Carolyn

This book, for grades 2-6, is designed to provide students with a highly motivating and unique opportunity to investigate an aquatic habitat. Students set up, observe, study, and reflect upon their own "desktop ponds." Accessible plants and small animals used in these activities include Elodea, Tubifex worms, snails, mosquito larvae, and fish.…

Development of an automated desktop procedure for defining macro ...

African Journals Online (AJOL)

2006-07-03

break points' such as ... An automated desktop procedure was developed for computing statistically defensible, multiple change .... from source to mouth. .... the calculated value was less than the test statistic given in Owen.

A Survey of Students Participating in a Computer-Assisted Education Programme

Science.gov (United States)

Yel, Elif Binboga; Korhan, Orhan

2015-01-01

This paper mainly examines anthropometric data, data regarding the habits, experiences, and attitudes of the students about their tablet/laptop/desktop computer use, in addition to self-reported musculoskeletal discomfort levels and frequencies of students participating in a tablet-assisted interactive education programme. A two-part questionnaire…

Realization of a Desktop Flight Simulation System for Motion-Cueing Studies

Directory of Open Access Journals (Sweden)

Berkay Volkaner

2016-05-01

Full Text Available Parallel robotic mechanisms are generally used in flight simulators with a motion-cueing algorithm to create an unlimited motion feeling of a simulated medium in a bounded workspace of the simulator. A major problem in flight simulators is that the simulation has an unbounded space and the manipulator has a limited one. Using a washout filter in the motion-cueing algorithm overcomes this. In this study, a low-cost six degrees of freedom (DoF desktop parallel manipulator is used to test a classical motion-cueing algorithm; the algorithm's functionality is confirmed with a Simulink real-time environment. Translational accelerations and angular velocities of the simulated medium obtained from FlightGear flight simulation software are processed through a generated washout filter algorithm and the simulated medium's motion information is transmitted to the desktop parallel robotic mechanism as a set point for each leg. The major issues of this paper are designing a desktop simulation system, controlling the parallel manipulator, communicating between the flight simulation and the platform, designing a motion-cueing algorithm and determining the parameters of the washout filters.

Laptops vs. Desktops in a Google Groups Environment: A Study on Collaborative Learning

Directory of Open Access Journals (Sweden)

Steven Lopes Abrantes

2011-01-01

Full Text Available Current literature on m-learning refers to the lack of studies on real use of m-learning applications and how they can compete with current desktop counterparts. The study consists of an experiment involving one hundred and twelve students of higher education and a set of learning activities that they have to accomplish. This study has the main objective to validate if the students that use laptops or desktops are in the flow experience and which of them are more in the flow experience, when using Google Groups. The used approach is based on the flow experience introduced by [1]. It was possible to conclude that students have experienced the flow state both by students using laptops or desktops, but having the laptop students a more positive effect in the flow experience.

Developing a Process Model for the Forensic Extraction of Information from Desktop Search Applications

Directory of Open Access Journals (Sweden)

Timothy Pavlic

2008-03-01

Full Text Available Desktop search applications can contain cached copies of files that were deleted from the file system. Forensic investigators see this as a potential source of evidence, as documents deleted by suspects may still exist in the cache. Whilst there have been attempts at recovering data collected by desktop search applications, there is no methodology governing the process, nor discussion on the most appropriate means to do so. This article seeks to address this issue by developing a process model that can be applied when developing an information extraction application for desktop search applications, discussing preferred methods and the limitations of each. This work represents a more structured approach than other forms of current research.

Desktop Publishing: Its Impact on Community College Journalism.

Science.gov (United States)

Grzywacz-Gray, John; And Others

1987-01-01

Illustrates the kinds of copy that can be created on Apple Macintosh computers and laser printers. Shows font and type specification options. Discusses desktop publishing costs, potential problems, and computer compatibility. Considers the use of computers in college journalism in production, graphics, accounting, advertising, and promotion. (AYC)

SAMP: Application Messaging for Desktop and Web Applications

Science.gov (United States)

Taylor, M. B.; Boch, T.; Fay, J.; Fitzpatrick, M.; Paioro, L.

2012-09-01

SAMP, the Simple Application Messaging Protocol, is a technology which allows tools to communicate. It is deployed in a number of desktop astronomy applications including ds9, Aladin, TOPCAT, World Wide Telescope and numerous others, and makes it straightforward for a user to treat a selection of these tools as a loosely-integrated suite, combining the most powerful features of each. It has been widely used within Virtual Observatory contexts, but is equally suitable for non-VO use. Enabling SAMP communication from web-based content has long been desirable. An obvious use case is arranging for a click on a web page link to deliver an image, table or spectrum to a desktop viewer, but more sophisticated two-way interaction with rich internet applications would also be possible. Use from the web however presents some problems related to browser sandboxing. We explain how the SAMP Web Profile, introduced in version 1.3 of the SAMP protocol, addresses these issues, and discuss the resulting security implications.

Using Desktop Publishing To Enhance the "Writing Process."

Science.gov (United States)

Millman, Patricia G.; Clark, Margaret P.

1997-01-01

Describes the development of an instructional technology course at Fairmont State College (West Virginia) for education majors that included a teaching module combining steps of the writing process to provide for the interdisciplinary focus of writing across the curriculum. Discusses desktop publishing, the National Writing Project, and student…

Desktop Publishing on the Macintosh: A Software Perspective.

Science.gov (United States)

Devan, Steve

1987-01-01

Discussion of factors to be considered in selecting desktop publishing software for the Macintosh microcomputer focuses on the two approaches to such software, i.e., batch and interactive, and three technical considerations, i.e., document, text, and graphics capabilities. Some new developments in graphics software are also briefly described. (MES)

Introducing the CUAHSI Hydrologic Information System Desktop Application (HydroDesktop) and Open Development Community

Science.gov (United States)

Ames, D.; Kadlec, J.; Horsburgh, J. S.; Maidment, D. R.

2009-12-01

The Consortium of Universities for the Advancement of Hydrologic Sciences (CUAHSI) Hydrologic Information System (HIS) project includes extensive development of data storage and delivery tools and standards including WaterML (a language for sharing hydrologic data sets via web services); and HIS Server (a software tool set for delivering WaterML from a server); These and other CUASHI HIS tools have been under development and deployment for several years and together, present a relatively complete software “stack” to support the consistent storage and delivery of hydrologic and other environmental observation data. This presentation describes the development of a new HIS software tool called “HydroDesktop” and the development of an online open source software development community to update and maintain the software. HydroDesktop is a local (i.e. not server-based) client side software tool that ultimately will run on multiple operating systems and will provide a highly usable level of access to HIS services. The software provides many key capabilities including data query, map-based visualization, data download, local data maintenance, editing, graphing, data export to selected model-specific data formats, linkage with integrated modeling systems such as OpenMI, and ultimately upload to HIS servers from the local desktop software. As the software is presently in the early stages of development, this presentation will focus on design approach and paradigm and is viewed as an opportunity to encourage participation in the open development community. Indeed, recognizing the value of community based code development as a means of ensuring end-user adoption, this project has adopted an “iterative” or “spiral” software development approach which will be described in this presentation.

No effect of ambient odor on the affective appraisal of a desktop virtual environment with signs of disorder.

Directory of Open Access Journals (Sweden)

Alexander Toet

Full Text Available Desktop virtual environments (VEs are increasingly deployed to study the effects of environmental qualities and interventions on human behavior and safety related concerns in built environments. For these applications it is essential that users appraise the affective qualities of the VE similar to those of its real world counterpart. Previous studies have shown that factors like simulated lighting, sound and dynamic elements all contribute to the affective appraisal of a desktop VE. Since ambient odor is known to affect the affective appraisal of real environments, and has been shown to increase the sense of presence in immersive VEs, it may also be an effective tool to tune the affective appraisal of desktop VEs. This study investigated if exposure to ambient odor can modulate the affective appraisal of a desktop VE with signs of public disorder.Participants explored a desktop VE representing a suburban neighborhood with signs of public disorder (neglect, vandalism and crime, while being exposed to either room air or subliminal levels of unpleasant (tar or pleasant (cut grass ambient odor. Whenever they encountered signs of disorder they reported their safety related concerns and associated affective feelings.Signs of crime in the desktop VE were associated with negative affective feelings and concerns for personal safety and personal property. However, there was no significant difference between reported safety related concerns and affective connotations in the control (no-odor and in each of the two ambient odor conditions.Ambient odor did not affect safety related concerns and affective connotations associated with signs of disorder in the desktop VE. Thus, semantic congruency between ambient odor and a desktop VE may not be sufficient to influence its affective appraisal, and a more realistic simulation in which simulated objects appear to emit scents may be required to achieve this goal.

Versatile Desktop Experiment Module (DEMo) on Heat Transfer

Science.gov (United States)

Minerick, Adrienne R.

2010-01-01

This paper outlines a new Desktop Experiment Module (DEMo) engineered for a chemical engineering junior-level Heat Transfer course. This new DEMo learning tool is versatile, fairly inexpensive, and portable such that it can be positioned on student desks throughout a classroom. The DEMo system can illustrate conduction of various materials,…

The desktop muon detector: A simple, physics-motivated machine- and electronics-shop project for university students

Science.gov (United States)

Axani, S. N.; Conrad, J. M.; Kirby, C.

2017-12-01

This paper describes the construction of a desktop muon detector, an undergraduate-level physics project that develops machine-shop and electronics-shop technical skills. The desktop muon detector is a self-contained apparatus that employs a plastic scintillator as the detection medium and a silicon photomultiplier for light collection. This detector can be battery powered and is used in conjunction with the provided software. The total cost per detector is approximately 100. We describe physics experiments we have performed, and then suggest several other interesting measurements that are possible, with one or more desktop muon detectors.

An Exercise in Desktop Publishing: Using the "Newsroom."

Science.gov (United States)

Kiteka, Sebastian F.

This guide provides a description and step-by-step instructions for the use of "Newsroom," a desktop-publishing program for the Apple II series of microcomputers produced by Springboard Software Inc. Based on the 1984 version of the program, this two-hour exercise focuses on the design and production of a newsletter with text and…

Nielsen PrimeLocation Web/Desktop: Assessing and GIS Mapping Market Area

Data.gov (United States)

Social Security Administration — Nielsen PrimeLocation Web and Desktop Software Licensed for Internal Use only: Pop-Facts Demographics Database, Geographic Mapping Data Layers, Geo-Coding locations.

Development of a Desktop Simulator for APR1400 Nuclear Power Plant

International Nuclear Information System (INIS)

Lee, J. B.

2016-01-01

It is essential for utilities to possess a full-scope simulator for operator training and operation test for operators. But it is very expensive and sometimes lack of fidelity if processes of developing the simulator and designing the plant are in parallel. It is due to the situation that simulator development stage sometimes precedes the plant design stage and modifications may occur to the design of the plant in construction stage. In an attempt to build a low cost and efficient simulator, a desktop simulator has been developed. This model is described herein. Using desktop simulators for training operators is an efficient method for familiarizing operators with their plant’s operation. A low cost and efficient desktop simulator for APR1400 has been developed, and brief features are introduced here. It is configured to mimic a full-scale simulator, and can be used for operators to be familiarized to their plant’s operation. Since the size of the simulator is small enough to be fit in a desk, it can be used in a classroom or in an office at any time. It can also be used to evaluate design changes or modifications of the plant before implementing them to the plant

Development of a Desktop Simulator for APR1400 Nuclear Power Plant

Energy Technology Data Exchange (ETDEWEB)

Lee, J. B. [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2016-10-15

It is essential for utilities to possess a full-scope simulator for operator training and operation test for operators. But it is very expensive and sometimes lack of fidelity if processes of developing the simulator and designing the plant are in parallel. It is due to the situation that simulator development stage sometimes precedes the plant design stage and modifications may occur to the design of the plant in construction stage. In an attempt to build a low cost and efficient simulator, a desktop simulator has been developed. This model is described herein. Using desktop simulators for training operators is an efficient method for familiarizing operators with their plant’s operation. A low cost and efficient desktop simulator for APR1400 has been developed, and brief features are introduced here. It is configured to mimic a full-scale simulator, and can be used for operators to be familiarized to their plant’s operation. Since the size of the simulator is small enough to be fit in a desk, it can be used in a classroom or in an office at any time. It can also be used to evaluate design changes or modifications of the plant before implementing them to the plant.

Development of Web-Based Remote Desktop to Provide Adaptive User Interfaces in Cloud Platform

OpenAIRE

Shuen-Tai Wang; Hsi-Ya Chang

2014-01-01

Cloud virtualization technologies are becoming more and more prevalent, cloud users usually encounter the problem of how to access to the virtualized remote desktops easily over the web without requiring the installation of special clients. To resolve this issue, we took advantage of the HTML5 technology and developed web-based remote desktop. It permits users to access the terminal which running in our cloud platform from anywhere. We implemented a sketch of web interfac...

Desktop Publishing in the University: Current Progress, Future Visions.

Science.gov (United States)

Smith, Thomas W.

1989-01-01

Discussion of the workflow involved in desktop publishing focuses on experiences at the College of Engineering at the University of Wisconsin at Madison. Highlights include cost savings and productivity gains in page layout and composition; editing, translation, and revision issues; printing and distribution; and benefits to the reader. (LRW)

Big Memory Elegance: HyperCard Information Processing and Desktop Publishing.

Science.gov (United States)

Bitter, Gary G.; Gerson, Charles W., Jr.

1991-01-01

Discusses hardware requirements, functions, and applications of five information processing and desktop publishing software packages for the Macintosh: HyperCard, PageMaker, Cricket Presents, Power Point, and Adobe illustrator. Benefits of these programs for schools are considered. (MES)

Applications and a three-dimensional desktop environment for an immersive virtual reality system

International Nuclear Information System (INIS)

Kageyama, Akira; Masada, Youhei

2013-01-01

We developed an application launcher called Multiverse for scientific visualizations in a CAVE-type virtual reality (VR) system. Multiverse can be regarded as a type of three-dimensional (3D) desktop environment. In Multiverse, a user in a CAVE room can browse multiple visualization applications with 3D icons and explore movies that float in the air. Touching one of the movies causes ''teleportation'' into the application's VR space. After analyzing the simulation data using the application, the user can jump back into Multiverse's VR desktop environment in the CAVE

HydroDesktop: An Open Source GIS-Based Platform for Hydrologic Data Discovery, Visualization, and Analysis

Science.gov (United States)

Ames, D. P.; Kadlec, J.; Cao, Y.; Grover, D.; Horsburgh, J. S.; Whiteaker, T.; Goodall, J. L.; Valentine, D. W.

2010-12-01

A growing number of hydrologic information servers are being deployed by government agencies, university networks, and individual researchers using the Consortium of Universities for the Advancement of Hydrologic Science, Inc. (CUAHSI) Hydrologic Information System (HIS). The CUAHSI HIS Project has developed a standard software stack, called HydroServer, for publishing hydrologic observations data. It includes the Observations Data Model (ODM) database and Water Data Service web services, which together enable publication of data on the Internet in a standard format called Water Markup Language (WaterML). Metadata describing available datasets hosted on these servers is compiled within a central metadata catalog called HIS Central at the San Diego Supercomputer Center and is searchable through a set of predefined web services based queries. Together, these servers and central catalog service comprise a federated HIS of a scale and comprehensiveness never previously available. This presentation will briefly review/introduce the CUAHSI HIS system with special focus on a new HIS software tool called "HydroDesktop" and the open source software development web portal, www.HydroDesktop.org, which supports community development and maintenance of the software. HydroDesktop is a client-side, desktop software application that acts as a search and discovery tool for exploring the distributed network of HydroServers, downloading specific data series, visualizing and summarizing data series and exporting these to formats needed for analysis by external software. HydroDesktop is based on the open source DotSpatial GIS developer toolkit which provides it with map-based data interaction and visualization, and a plug-in interface that can be used by third party developers and researchers to easily extend the software using Microsoft .NET programming languages. HydroDesktop plug-ins that are presently available or currently under development within the project and by third party

A Real-World Project for a Desktop Publishing Course.

Science.gov (United States)

Marsden, James D.

1994-01-01

Describes a project in a desktop publishing course in which students work with nonprofit and campus organizations to design brochures that fulfill important needs. Discusses specific tools students use. Describes the brochure project, project criteria, clients, text and graphics for the project, how to evaluate the project, and guidelines for…

ACID Astronomical and Physics Cloud Interactive Desktop: A Prototype of VUI for CTA Science Gateway

Science.gov (United States)

Massimino, P.; Costa, A.; Becciani, U.; Vuerli, C.; Bandieramonte, M.; Petta, C.; Riggi, S.; Sciacca, E.; Vitello, F.; Pistagna, C.

2014-05-01

The Astronomical & Physics Cloud Interactive Desktop, developed for the prototype of CTA Science Gateway in Catania, Italy, allows to use many software packages without any installation on the local desktop. The users will be able to exploit, if applicable, the native Graphical User Interface (GUI) of the programs that are available in the ACID environment. For using interactively the remote programs, ACID exploits an "ad hoc" VNC-based User Interface (VUI).

Designing for Communication: The Key to Successful Desktop Publishing.

Science.gov (United States)

McCain, Ted D. E.

Written for those who are new to design and page layout, this book focuses on providing novice desktop publishers with an understanding of communication, graphic design, typography, page layout, and page layout techniques. The book also discusses how people read, design as a consequence of understanding, and the principles of page layout. Chapters…

A desktop 3D printer with dual extruders to produce customised electronic circuitry

Science.gov (United States)

Butt, Javaid; Onimowo, Dominic Adaoiza; Gohrabian, Mohammed; Sharma, Tinku; Shirvani, Hassan

2018-03-01

3D printing has opened new horizons for the manufacturing industry in general, and 3D printers have become the tools for technological advancements. There is a huge divide between the pricing of industrial and desktop 3D printers with the former being on the expensive side capable of producing excellent quality products and latter being on the low-cost side with moderate quality results. However, there is a larger room for improvements and enhancements for the desktop systems as compared to the industrial ones. In this paper, a desktop 3D printer called Prusa Mendel i2 has been modified and integrated with an additional extruder so that the system can work with dual extruders and produce bespoke electronic circuits. The communication between the two extruders has been established by making use of the In-Chip Serial Programming port on the Arduino Uno controlling the printer. The biggest challenge is to control the flow of electric paint (to be dispensed by the new extruder) and CFD (Computational Fluid Dynamics) analysis has been carried out to ascertain the optimal conditions for proper dispensing. The final product is a customised electronic circuit with the base of plastic (from the 3D printer's extruder) and electronic paint (from the additional extruder) properly dispensed to create a live circuit on a plastic platform. This low-cost enhancement to a desktop 3D printer can provide a new prospect to produce multiple material parts where the additional extruder can be filled with any material that can be properly dispensed from its nozzle.

What Desktop Publishing Can Teach Professional Writing Students about Publishing.

Science.gov (United States)

Dobberstein, Michael

1992-01-01

Points out that desktop publishing is a metatechnology that allows professional writing students access to the production phase of publishing, giving students hands-on practice in preparing text for printing and in learning how that preparation affects the visual meaning of documents. (SR)

Visual attention for a desktop virtual environment with ambient scent

NARCIS (Netherlands)

Toet, A.; Schaik, M.G. van

2013-01-01

In the current study participants explored a desktop virtual environment (VE) representing a suburban neighborhood with signs of public disorder (neglect, vandalism and crime), while being exposed to either room air (control group), or subliminal levels of tar (unpleasant; typically associated with

Feasibility of Bioprinting with a Modified Desktop 3D Printer.

Science.gov (United States)

Goldstein, Todd A; Epstein, Casey J; Schwartz, John; Krush, Alex; Lagalante, Dan J; Mercadante, Kevin P; Zeltsman, David; Smith, Lee P; Grande, Daniel A

2016-12-01

Numerous studies have shown the capabilities of three-dimensional (3D) printing for use in the medical industry. At the time of this publication, basic home desktop 3D printer kits can cost as little as $300, whereas medical-specific 3D bioprinters can cost more than $300,000. The purpose of this study is to show how a commercially available desktop 3D printer could be modified to bioprint an engineered poly-l-lactic acid scaffold containing viable chondrocytes in a bioink. Our bioprinter was used to create a living 3D functional tissue-engineered cartilage scaffold. In this article, we detail the design, production, and calibration of this bioprinter. In addition, the bioprinted cells were tested for viability, proliferation, biochemistry, and gene expression; these tests showed that the cells survived the printing process, were able to continue dividing, and produce the extracellular matrix expected of chondrocytes.

MDA-image: an environment of networked desktop computers for teleradiology/pathology.

Science.gov (United States)

Moffitt, M E; Richli, W R; Carrasco, C H; Wallace, S; Zimmerman, S O; Ayala, A G; Benjamin, R S; Chee, S; Wood, P; Daniels, P

1991-04-01

MDA-Image, a project of The University of Texas M. D. Anderson Cancer Center, is an environment of networked desktop computers for teleradiology/pathology. Radiographic film is digitized with a film scanner and histopathologic slides are digitized using a red, green, and blue (RGB) video camera connected to a microscope. Digitized images are stored on a data server connected to the institution's computer communication network (Ethernet) and can be displayed from authorized desktop computers connected to Ethernet. Images are digitized for cases presented at the Bone Tumor Management Conference, a multidisciplinary conference in which treatment options are discussed among clinicians, surgeons, radiologists, pathologists, radiotherapists, and medical oncologists. These radiographic and histologic images are shown on a large screen computer monitor during the conference. They are available for later review for follow-up or representation.

Multimodal Desktop Interaction: The Face –Object-Gesture–Voice Example

DEFF Research Database (Denmark)

Vidakis, Nikolas; Vlasopoulos, Anastasios; Kounalakis, Tsampikos

2013-01-01

This paper presents a natural user interface system based on multimodal human computer interaction, which operates as an intermediate module between the user and the operating system. The aim of this work is to demonstrate a multimodal system which gives users the ability to interact with desktop...

Multimedia architectures: from desktop systems to portable appliances

Science.gov (United States)

Bhaskaran, Vasudev; Konstantinides, Konstantinos; Natarajan, Balas R.

1997-01-01

Future desktop and portable computing systems will have as their core an integrated multimedia system. Such a system will seamlessly combine digital video, digital audio, computer animation, text, and graphics. Furthermore, such a system will allow for mixed-media creation, dissemination, and interactive access in real time. Multimedia architectures that need to support these functions have traditionally required special display and processing units for the different media types. This approach tends to be expensive and is inefficient in its use of silicon. Furthermore, such media-specific processing units are unable to cope with the fluid nature of the multimedia market wherein the needs and standards are changing and system manufacturers may demand a single component media engine across a range of products. This constraint has led to a shift towards providing a single-component multimedia specific computing engine that can be integrated easily within desktop systems, tethered consumer appliances, or portable appliances. In this paper, we review some of the recent architectural efforts in developing integrated media systems. We primarily focus on two efforts, namely the evolution of multimedia-capable general purpose processors and a more recent effort in developing single component mixed media co-processors. Design considerations that could facilitate the migration of these technologies to a portable integrated media system also are presented.

Negotiation of Meaning in Desktop Videoconferencing-Supported Distance Language Learning

Science.gov (United States)

Wang, Yuping

2006-01-01

The aim of this research is to reveal the dynamics of focus on form in task completion via videoconferencing. This examination draws on current second language learning theories regarding effective language acquisition, research in Computer Mediated Communication (CMC) and empirical data from an evaluation of desktop videoconferencing-supported…

A Desktop Publishing Course: An Alternative to Internships for Rural Universities.

Science.gov (United States)

Flammia, Madelyn

1992-01-01

Suggests that a course in desktop publishing can provide students at rural schools with experience equivalent to internships. Notes that the course provided students with real-world experience and benefited the university in terms of services and public relations. (RS)

Practical Downloading to Desktop Publishing: Enhancing the Delivery of Information.

Science.gov (United States)

Danziger, Pamela N.

This paper is addressed to librarians and information managers who, as one of the many activities they routinely perform, frequently publish information in such formats as newsletters, manuals, brochures, forms, presentations, or reports. It is argued that desktop publishing--a personal computer-based software package used to generate documents of…

An ergonomic evaluation comparing desktop, notebook, and subnotebook computers.

Science.gov (United States)

Szeto, Grace P; Lee, Raymond

2002-04-01

To evaluate and compare the postures and movements of the cervical and upper thoracic spine, the typing performance, and workstation ergonomic factors when using a desktop, notebook, and subnotebook computers. Repeated-measures design. A motion analysis laboratory with an electromagnetic tracking device. A convenience sample of 21 university students between ages 20 and 24 years with no history of neck or shoulder discomfort. Each subject performed a standardized typing task by using each of the 3 computers. Measurements during the typing task were taken at set intervals. Cervical and thoracic spines adopted a more flexed posture in using the smaller-sized computers. There were significantly greater neck movements in using desktop computers when compared with the notebook and subnotebook computers. The viewing distances adopted by the subjects decreased as the computer size decreased. Typing performance and subjective rating of difficulty in using the keyboards were also significantly different among the 3 types of computers. Computer users need to consider the posture of the spine and potential risk of developing musculoskeletal discomfort in choosing computers. Copyright 2002 by the American Congress of Rehabilitation Medicine and the American Academy of Physical Medicine and Rehabilitation

GTfold: Enabling parallel RNA secondary structure prediction on multi-core desktops

DEFF Research Database (Denmark)

Swenson, M Shel; Anderson, Joshua; Ash, Andrew

2012-01-01

achieved significant improvements in runtime, but their implementations were not portable from niche high-performance computers or easily accessible to most RNA researchers. With the increasing prevalence of multi-core desktop machines, a new parallel prediction program is needed to take full advantage...

Designing Design into an Advanced Desktop Publishing Course (A Teaching Tip).

Science.gov (United States)

Guthrie, Jim

1995-01-01

Describes an advanced desktop publishing course that combines instruction in a few advanced techniques for using software with extensive discussion of such design principles as consistency, proportion, asymmetry, appropriateness, contrast, and color. Describes computer hardware and software, class assignments, problems, and the rationale for such…

Desktop publishing and validation of custom near visual acuity charts.

Science.gov (United States)

Marran, Lynn; Liu, Lei; Lau, George

2008-11-01

Customized visual acuity (VA) assessment is an important part of basic and clinical vision research. Desktop computer based distance VA measurements have been utilized, and shown to be accurate and reliable, but computer based near VA measurements have not been attempted, mainly due to the limited spatial resolution of computer monitors. In this paper, we demonstrate how to use desktop publishing to create printed custom near VA charts. We created a set of six near VA charts in a logarithmic progression, 20/20 through 20/63, with multiple lines of the same acuity level, different letter arrangements in each line and a random noise background. This design allowed repeated measures of subjective accommodative amplitude without the potential artifact of familiarity of the optotypes. The background maintained a constant and spatial frequency rich peripheral stimulus for accommodation across the six different acuity levels. The paper describes in detail how pixel-wise accurate black and white bitmaps of Sloan optotypes were used to create the printed custom VA charts. At all acuity levels, the physical sizes of the printed custom optotypes deviated no more than 0.034 log units from that of the standard, satisfying the 0.05 log unit ISO criterion we used to demonstrate physical equivalence. Also, at all acuity levels, log unit differences in the mean target distance for which reliable recognition of letters first occurred for the printed custom optotypes compared to the standard were found to be below 0.05, satisfying the 0.05 log unit ISO criterion we used to demonstrate functional equivalence. It is possible to use desktop publishing to create custom near VA charts that are physically and functionally equivalent to standard VA charts produced by a commercial printing process.

SERVICE HANDBOOK FOR THE DESKTOP SUPPORT CONTRACT WIH IT DIVISION

CERN Multimedia

2000-01-01

A Desktop Support Contract has been running since January 1999 to offer help to all users at CERN with problems that occur with their desktop computers. The contract is run conjointly by the Swedish Company WM-data and the Swiss company DCS.The contract is comprised of the Computing Helpdesk, a General Service for all parts of CERN and also Local Service for those divisions and groups that want faster response times and additional help with their specific computer environment.In order to describe what services are being offered, and also to give a better understanding of the structure of the contract, a Service Handbook has been created. The intended audience for the Service Handbook is everyone that is using the contract, i.e. users, managers and also the service staff inside the contract. In the handbook you will find what help you can get from the contract, how to get in touch with the contract, and also what response times you can expect. Since the computer environment at CERN is a never-changing entity, ...

Using M@th Desktop Notebooks and Palettes in the Classroom

Science.gov (United States)

Simonovits, Reinhard

2011-01-01

This article explains the didactical design of M@th Desktop (MD), a teaching and learning software application for high schools and universities. The use of two types of MD resources is illustrated: notebooks and palettes, focusing on the topic of exponential functions. The handling of MD in a blended learning approach and the impact on the…

Efficient Redundancy Techniques in Cloud and Desktop Grid Systems using MAP/G/c-type Queues

Science.gov (United States)

Chakravarthy, Srinivas R.; Rumyantsev, Alexander

2018-03-01

Cloud computing is continuing to prove its flexibility and versatility in helping industries and businesses as well as academia as a way of providing needed computing capacity. As an important alternative to cloud computing, desktop grids allow to utilize the idle computer resources of an enterprise/community by means of distributed computing system, providing a more secure and controllable environment with lower operational expenses. Further, both cloud computing and desktop grids are meant to optimize limited resources and at the same time to decrease the expected latency for users. The crucial parameter for optimization both in cloud computing and in desktop grids is the level of redundancy (replication) for service requests/workunits. In this paper we study the optimal replication policies by considering three variations of Fork-Join systems in the context of a multi-server queueing system with a versatile point process for the arrivals. For services we consider phase type distributions as well as shifted exponential and Weibull. We use both analytical and simulation approach in our analysis and report some interesting qualitative results.

Efficient Redundancy Techniques in Cloud and Desktop Grid Systems using MAP/G/c-type Queues

Directory of Open Access Journals (Sweden)

Chakravarthy Srinivas R.

2018-03-01

Full Text Available Cloud computing is continuing to prove its flexibility and versatility in helping industries and businesses as well as academia as a way of providing needed computing capacity. As an important alternative to cloud computing, desktop grids allow to utilize the idle computer resources of an enterprise/community by means of distributed computing system, providing a more secure and controllable environment with lower operational expenses. Further, both cloud computing and desktop grids are meant to optimize limited resources and at the same time to decrease the expected latency for users. The crucial parameter for optimization both in cloud computing and in desktop grids is the level of redundancy (replication for service requests/workunits. In this paper we study the optimal replication policies by considering three variations of Fork-Join systems in the context of a multi-server queueing system with a versatile point process for the arrivals. For services we consider phase type distributions as well as shifted exponential and Weibull. We use both analytical and simulation approach in our analysis and report some interesting qualitative results.

Design and validation of a 3D virtual reality desktop system for sonographic length and volume measurements in early pregnancy evaluation.

Science.gov (United States)

Baken, Leonie; van Gruting, Isabelle M A; Steegers, Eric A P; van der Spek, Peter J; Exalto, Niek; Koning, Anton H J

2015-03-01

To design and validate a desktop virtual reality (VR) system, for presentation and assessment of volumetric data, based on commercially off-the-shelf hardware as an alternative to a fully immersive CAVE-like I-Space VR system. We designed a desktop VR system, using a three-dimensional (3D) monitor and a six degrees-of-freedom tracking system. A personal computer uses the V-Scope (Erasmus MC, Rotterdam, The Netherlands) volume-rendering application, developed for the I-Space, to create a hologram of volumetric data. Inter- and intraobserver reliability for crown-rump length and embryonic volume measurements are investigated using Bland-Altman plots and intraclass correlation coefficients. Time required for the measurements was recorded. Comparing the I-Space and the desktop VR system, the mean difference for crown-rump length is -0.34% (limits of agreement -2.58-1.89, ±2.24%) and for embryonic volume -0.92% (limits of agreement -6.97-5.13, ±6.05%). Intra- and interobserver intraclass correlation coefficients of the desktop VR system were all >0.99. Measurement times were longer on the desktop VR system compared with the I-Space, but the differences were not statistically significant. A user-friendly desktop VR system can be put together using commercially off-the-shelf hardware at an acceptable price. This system provides a valid and reliable method for embryonic length and volume measurements and can be used in clinical practice. © 2014 Wiley Periodicals, Inc.

NASA's Climate in a Box: Desktop Supercomputing for Open Scientific Model Development

Science.gov (United States)

Wojcik, G. S.; Seablom, M. S.; Lee, T. J.; McConaughy, G. R.; Syed, R.; Oloso, A.; Kemp, E. M.; Greenseid, J.; Smith, R.

2009-12-01

NASA's High Performance Computing Portfolio in cooperation with its Modeling, Analysis, and Prediction program intends to make its climate and earth science models more accessible to a larger community. A key goal of this effort is to open the model development and validation process to the scientific community at large such that a natural selection process is enabled and results in a more efficient scientific process. One obstacle to others using NASA models is the complexity of the models and the difficulty in learning how to use them. This situation applies not only to scientists who regularly use these models but also non-typical users who may want to use the models such as scientists from different domains, policy makers, and teachers. Another obstacle to the use of these models is that access to high performance computing (HPC) accounts, from which the models are implemented, can be restrictive with long wait times in job queues and delays caused by an arduous process of obtaining an account, especially for foreign nationals. This project explores the utility of using desktop supercomputers in providing a complete ready-to-use toolkit of climate research products to investigators and on demand access to an HPC system. One objective of this work is to pre-package NASA and NOAA models so that new users will not have to spend significant time porting the models. In addition, the prepackaged toolkit will include tools, such as workflow, visualization, social networking web sites, and analysis tools, to assist users in running the models and analyzing the data. The system architecture to be developed will allow for automatic code updates for each user and an effective means with which to deal with data that are generated. We plan to investigate several desktop systems, but our work to date has focused on a Cray CX1. Currently, we are investigating the potential capabilities of several non-traditional development environments. While most NASA and NOAA models are

What's New in Software? Mastery of the Computer through Desktop Publishing.

Science.gov (United States)

Hedley, Carolyn N.; Ellsworth, Nancy J.

1993-01-01

Offers thoughts on the phenomenon of the underuse of classroom computers. Argues that desktop publishing is one way of overcoming the computer malaise occurring in schools, using the incentive of classroom reading and writing for mastery of many aspects of computer production, including writing, illustrating, reading, and publishing. (RS)

Desktop war - data suppliers competing for bigger market share

International Nuclear Information System (INIS)

Sword, M.

1999-01-01

The intense competition among suppliers of computerized data and computer software to the petroleum and natural gas industry in western Canada is discussed. It is estimated that the Canadian oil patch spends a large sum, about $ 400 million annually on geoscience information and related costs and industry is looking for ways to significantly reduce those costs. There is a need for integrated, desktop driven data sets. Sensing the determination of industry to reduce information acquisition costs, data providers are responding with major consolidation of data sets. The major evolution in the industry is on-line access to increase the speed of information delivery. Data vendors continue to integrate land, well, log, production and other data sets whether public or proprietary. The result is stronger foundations as platforms for interpretive software. Another development is the rise of the Internet and Intranets and the re-definition of the role of information technology departments in the industry as both of these are paving the way for electronic delivery of information and software tools to the desktop. Development of proprietary data sets, acquisition of competitors with complimentary data sets that enhances products and services are just some of the ways data vendors are using to get a bigger piece of the exploration and development pie

Micro Tools with Pneumatic Actuators for Desktop Factories

Directory of Open Access Journals (Sweden)

Björn HOXHOLD

2009-10-01

Full Text Available This paper presents the design, the simulation and the fabrication process of two novel pneumatically driven auxiliary micro tools that can be used to improve and to speed up assembling processes in desktop factories. The described micro systems are designed to function as centrifugal feeders for small glass balls or active clamping devices with small external dimensions. They are able to deliver more than six balls per second on demand to a gripper and align and clamp single chips in a fixed position.

Desktop supercomputer: what can it do?

Science.gov (United States)

Bogdanov, A.; Degtyarev, A.; Korkhov, V.

2017-12-01

The paper addresses the issues of solving complex problems that require using supercomputers or multiprocessor clusters available for most researchers nowadays. Efficient distribution of high performance computing resources according to actual application needs has been a major research topic since high-performance computing (HPC) technologies became widely introduced. At the same time, comfortable and transparent access to these resources was a key user requirement. In this paper we discuss approaches to build a virtual private supercomputer available at user's desktop: a virtual computing environment tailored specifically for a target user with a particular target application. We describe and evaluate possibilities to create the virtual supercomputer based on light-weight virtualization technologies, and analyze the efficiency of our approach compared to traditional methods of HPC resource management.

Turbulence Visualization at the Terascale on Desktop PCs

KAUST Repository

Treib, M.

2012-12-01

Despite the ongoing efforts in turbulence research, the universal properties of the turbulence small-scale structure and the relationships between small-and large-scale turbulent motions are not yet fully understood. The visually guided exploration of turbulence features, including the interactive selection and simultaneous visualization of multiple features, can further progress our understanding of turbulence. Accomplishing this task for flow fields in which the full turbulence spectrum is well resolved is challenging on desktop computers. This is due to the extreme resolution of such fields, requiring memory and bandwidth capacities going beyond what is currently available. To overcome these limitations, we present a GPU system for feature-based turbulence visualization that works on a compressed flow field representation. We use a wavelet-based compression scheme including run-length and entropy encoding, which can be decoded on the GPU and embedded into brick-based volume ray-casting. This enables a drastic reduction of the data to be streamed from disk to GPU memory. Our system derives turbulence properties directly from the velocity gradient tensor, and it either renders these properties in turn or generates and renders scalar feature volumes. The quality and efficiency of the system is demonstrated in the visualization of two unsteady turbulence simulations, each comprising a spatio-temporal resolution of 10244. On a desktop computer, the system can visualize each time step in 5 seconds, and it achieves about three times this rate for the visualization of a scalar feature volume. © 1995-2012 IEEE.

Bringing the medical library to the office desktop.

Science.gov (United States)

Brown, S R; Decker, G; Pletzke, C J

1991-01-01

This demonstration illustrates LRC Remote Computer Services- a dual operating system, multi-protocol system for delivering medical library services to the medical professional's desktop. A working model draws resources from CD-ROM and magnetic media file services, Novell and AppleTalk network protocol suites and gating, LAN and asynchronous (dial-in) access strategies, commercial applications for MS-DOS and Macintosh workstations and custom user interfaces. The demonstration includes a discussion of issues relevant to the delivery of said services, particularly with respect to maintenance, security, training/support, staffing, software licensing and costs.

Cloud Computing and Virtual Desktop Infrastructures in Afloat Environments

OpenAIRE

Gillette, Stefan E.

2012-01-01

The phenomenon of “cloud computing” has become ubiquitous among users of the Internet and many commercial applications. Yet, the U.S. Navy has conducted limited research in this nascent technology. This thesis explores the application and integration of cloud computing both at the shipboard level and in a multi-ship environment. A virtual desktop infrastructure, mirroring a shipboard environment, was built and analyzed in the Cloud Lab at the Naval Postgraduate School, which offers a potentia...

Indiana Humanities Council Request for the Indianapolis Energy Conversion Inst. For Phase I of the Indianapolis Energy Conservation Res Initiative also called the smartDESKTOP Initiative

Energy Technology Data Exchange (ETDEWEB)

Keller, John B.

2007-12-06

The smartDESKTOP Initiative at the Indiana Humanities Council received critical support in building and delivering a digital desktop for Indiana educators through the Department of Energy Grant DE-FG02-06ER64282. During the project period September 2006 through October of 2007, the number of Indiana educators with accounts on the smartDESKTOP more than tripled from under 2,000 to more than 7,000 accounts. An external review of the project conducted for the purposes of understanding the impact of the service in Indiana schools revealed that the majority of respondents felt that using the smartDESKTOP did reduce the time they spent managing paper. The same study revealed the challenges of implementing a digital desktop meant to help teachers leverage technology to improve their teaching and ultimately student learning. The most significant outcome of this project is that the Indiana Department of Education expressed interest in assuming responsibility for sustaining this project. The transition of the smartDESKTOP to the Indiana Department of Education was effective on November 1, 2007.

Desktop supercomputer: what can it do?

International Nuclear Information System (INIS)

Bogdanov, A.; Degtyarev, A.; Korkhov, V.

2017-01-01

The paper addresses the issues of solving complex problems that require using supercomputers or multiprocessor clusters available for most researchers nowadays. Efficient distribution of high performance computing resources according to actual application needs has been a major research topic since high-performance computing (HPC) technologies became widely introduced. At the same time, comfortable and transparent access to these resources was a key user requirement. In this paper we discuss approaches to build a virtual private supercomputer available at user's desktop: a virtual computing environment tailored specifically for a target user with a particular target application. We describe and evaluate possibilities to create the virtual supercomputer based on light-weight virtualization technologies, and analyze the efficiency of our approach compared to traditional methods of HPC resource management.

MICA: desktop software for comprehensive searching of DNA databases

Directory of Open Access Journals (Sweden)

Glick Benjamin S

2006-10-01

Full Text Available Abstract Background Molecular biologists work with DNA databases that often include entire genomes. A common requirement is to search a DNA database to find exact matches for a nondegenerate or partially degenerate query. The software programs available for such purposes are normally designed to run on remote servers, but an appealing alternative is to work with DNA databases stored on local computers. We describe a desktop software program termed MICA (K-Mer Indexing with Compact Arrays that allows large DNA databases to be searched efficiently using very little memory. Results MICA rapidly indexes a DNA database. On a Macintosh G5 computer, the complete human genome could be indexed in about 5 minutes. The indexing algorithm recognizes all 15 characters of the DNA alphabet and fully captures the information in any DNA sequence, yet for a typical sequence of length L, the index occupies only about 2L bytes. The index can be searched to return a complete list of exact matches for a nondegenerate or partially degenerate query of any length. A typical search of a long DNA sequence involves reading only a small fraction of the index into memory. As a result, searches are fast even when the available RAM is limited. Conclusion MICA is suitable as a search engine for desktop DNA analysis software.

Digital Dome versus Desktop Display: Learning Outcome Assessments by Domain Experts

Science.gov (United States)

Jacobson, Jeffery

2013-01-01

In previous publications, the author reported that students learned about Egyptian architecture and society by playing an educational game based on a virtual representation of a temple. Students played the game in a digital dome or on a standard desktop computer, and (each) then recorded a video tour of the temple. Those who had used the dome…

Desktop Publishing: The Effects of Computerized Formats on Reading Speed and Comprehension.

Science.gov (United States)

Knupfer, Nancy Nelson; McIsaac, Marina Stock

1989-01-01

Describes study that was conducted to determine the effects of two electronic text variables used in desktop publishing on undergraduate students' reading speed and comprehension. Research on text variables, graphic design, instructional text design, and computer screen design is discussed, and further studies are suggested. (22 references) (LRW)

From Server to Desktop: Capital and Institutional Planning for Client/Server Technology.

Science.gov (United States)

Mullig, Richard M.; Frey, Keith W.

1994-01-01

Beginning with a request for an enhanced system for decision/strategic planning support, the University of Chicago's biological sciences division has developed a range of administrative client/server tools, instituted a capital replacement plan for desktop technology, and created a planning and staffing approach enabling rapid introduction of new…

Reducing the Digital Divide among Children Who Received Desktop or Hybrid Computers for the Home

Directory of Open Access Journals (Sweden)

Gila Cohen Zilka

2016-06-01

Full Text Available Researchers and policy makers have been exploring ways to reduce the digital divide. Parameters commonly used to examine the digital divide worldwide, as well as in this study, are: (a the digital divide in the accessibility and mobility of the ICT infrastructure and of the content infrastructure (e.g., sites used in school; and (b the digital divide in literacy skills. In the present study we examined the degree of effectiveness of receiving a desktop or hybrid computer for the home in reducing the digital divide among children of low socio-economic status aged 8-12 from various localities across Israel. The sample consisted of 1,248 respondents assessed in two measurements. As part of the mixed-method study, 128 children were also interviewed. Findings indicate that after the children received desktop or hybrid computers, changes occurred in their frequency of access, mobility, and computer literacy. Differences were found between the groups: hybrid computers reduce disparities and promote work with the computer and surfing the Internet more than do desktop computers. Narrowing the digital divide for this age group has many implications for the acquisition of skills and study habits, and consequently, for the realization of individual potential. The children spoke about self improvement as a result of exposure to the digital environment, about a sense of empowerment and of improvement in their advantage in the social fabric. Many children expressed a desire to continue their education and expand their knowledge of computer applications, the use of software, of games, and more. Therefore, if there is no computer in the home and it is necessary to decide between a desktop and a hybrid computer, a hybrid computer is preferable.

Analytical Hierarchy Process for the selection of strategic alternatives for introduction of infrastructure virtual desktop infrastructure in the university

Directory of Open Access Journals (Sweden)

Katerina A. Makoviy

2017-12-01

Full Text Available The task of choosing a strategy for implementing the virtual desktop infrastructure into the IT infrastructure of the university is considered. The infrastructure of virtual desktops is a technology that provides centralization of management of client workplaces, increase the service life of computers in classrooms. The analysis of strengths and weaknesses, threats and opportunities for introducing virtualization in the university. Alternatives to implementation based on the results of the pilot project have been developed. To obtain quantitative estimates in the SWOT - analysis of the pilot project, the analytical hierarchy process is used. The analysis of implementation of the pilot project by experts is carried out and the integral value of quantitative estimates of various alternatives is generated. The combination of the analytical hierarchy process and SWOT - analysis allows you to choose the optimal strategy for implementing desktop virtualization.

基于OpenStack的虚拟桌面Spice的应用%Based on OpenStack virtual desktop applications of Spice

Institute of Scientific and Technical Information of China (English)

余康; 张鹏; 唐攀

2014-01-01

针对目前开源云平台OpenStack采用的VNC虚拟桌面在实际应用中存在着鼠标重影、屏幕无法自适应等不足之处，本文提出了一种新的OpenStack整合开源虚拟桌面传输协议Spice的虚拟桌面方案，该方案解决了目前OpenStack采用VNC虚拟桌面的不足之处，Spice协议较VNC有更强大的功能，能够提供更好的最终用户体验。%Open source cloud platform it has used VNC exist in actual application of the virtual desktop mouse ghosting, screen can't adaptive deficiency, such as this paper proposes a new open source virtual desktop transfer protocol Spice it integration of virtual desktop solution, the solution to solve the current deficiencies of the virtual desktop, it USES the VNC Spice protocol a VNC has more powerful functions, can provide a better end user experience.

Providing Assistive Technology Applications as a Service Through Cloud Computing.

Science.gov (United States)

Mulfari, Davide; Celesti, Antonio; Villari, Massimo; Puliafito, Antonio

2015-01-01

Users with disabilities interact with Personal Computers (PCs) using Assistive Technology (AT) software solutions. Such applications run on a PC that a person with a disability commonly uses. However the configuration of AT applications is not trivial at all, especially whenever the user needs to work on a PC that does not allow him/her to rely on his / her AT tools (e.g., at work, at university, in an Internet point). In this paper, we discuss how cloud computing provides a valid technological solution to enhance such a scenario.With the emergence of cloud computing, many applications are executed on top of virtual machines (VMs). Virtualization allows us to achieve a software implementation of a real computer able to execute a standard operating system and any kind of application. In this paper we propose to build personalized VMs running AT programs and settings. By using the remote desktop technology, our solution enables users to control their customized virtual desktop environment by means of an HTML5-based web interface running on any computer equipped with a browser, whenever they are.

Nuclear Plant Analyzer desktop workstation: An integrated interactive simulation, visualization and analysis tool

International Nuclear Information System (INIS)

Beelman, R.J.

1991-01-01

The advanced, best-estimate, reactor thermal-hydraulic codes were originally developed as mainframe computer applications because of speed, precision, memory and mass storage requirements. However, the productivity of numerical reactor safety analysts has historically been hampered by mainframe dependence due to limited mainframe CPU allocation, accessibility and availability, poor mainframe job throughput, and delays in obtaining and difficulty comprehending printed numerical results. The Nuclear Plant Analyzer (NPA) was originally developed as a mainframe computer-graphics aid for reactor safety analysts in addressing the latter consideration. Rapid advances in microcomputer technology have since enabled the installation and execution of these reactor safety codes on desktop computers thereby eliminating mainframe dependence. The need for a complementary desktop graphics display generation and presentation capability, coupled with the need for software standardization and portability, has motivated the redesign of the NPA as a UNIX/X-Windows application suitable for both mainframe and microcomputer

GUIdock-VNC: using a graphical desktop sharing system to provide a browser-based interface for containerized software.

Science.gov (United States)

Mittal, Varun; Hung, Ling-Hong; Keswani, Jayant; Kristiyanto, Daniel; Lee, Sung Bong; Yeung, Ka Yee

2017-04-01

Software container technology such as Docker can be used to package and distribute bioinformatics workflows consisting of multiple software implementations and dependencies. However, Docker is a command line-based tool, and many bioinformatics pipelines consist of components that require a graphical user interface. We present a container tool called GUIdock-VNC that uses a graphical desktop sharing system to provide a browser-based interface for containerized software. GUIdock-VNC uses the Virtual Network Computing protocol to render the graphics within most commonly used browsers. We also present a minimal image builder that can add our proposed graphical desktop sharing system to any Docker packages, with the end result that any Docker packages can be run using a graphical desktop within a browser. In addition, GUIdock-VNC uses the Oauth2 authentication protocols when deployed on the cloud. As a proof-of-concept, we demonstrated the utility of GUIdock-noVNC in gene network inference. We benchmarked our container implementation on various operating systems and showed that our solution creates minimal overhead. © The Authors 2017. Published by Oxford University Press.

Virtual Reality on a Desktop Hailed as New Tool in Distance Education.

Science.gov (United States)

Young, Jeffrey R.

2000-01-01

Describes college and university educational applications of desktop virtual reality to provide a more human touch to interactive distance education programs and impress the brain with more vivid images. Critics suggest the technology is too costly and time consuming and may even distract students from the content of an online course. (DB)

3d visualization of atomistic simulations on every desktop

Science.gov (United States)

Peled, Dan; Silverman, Amihai; Adler, Joan

2013-08-01

Once upon a time, after making simulations, one had to go to a visualization center with fancy SGI machines to run a GL visualization and make a movie. More recently, OpenGL and its mesa clone have let us create 3D on simple desktops (or laptops), whether or not a Z-buffer card is present. Today, 3D a la Avatar is a commodity technique, presented in cinemas and sold for home TV. However, only a few special research centers have systems large enough for entire classes to view 3D, or special immersive facilities like visualization CAVEs or walls, and not everyone finds 3D immersion easy to view. For maximum physics with minimum effort a 3D system must come to each researcher and student. So how do we create 3D visualization cheaply on every desktop for atomistic simulations? After several months of attempts to select commodity equipment for a whole room system, we selected an approach that goes back a long time, even predating GL. The old concept of anaglyphic stereo relies on two images, slightly displaced, and viewed through colored glasses, or two squares of cellophane from a regular screen/projector or poster. We have added this capability to our AViz atomistic visualization code in its new, 6.1 version, which is RedHat, CentOS and Ubuntu compatible. Examples using data from our own research and that of other groups will be given.

3d visualization of atomistic simulations on every desktop

International Nuclear Information System (INIS)

Peled, Dan; Silverman, Amihai; Adler, Joan

2013-01-01

Once upon a time, after making simulations, one had to go to a visualization center with fancy SGI machines to run a GL visualization and make a movie. More recently, OpenGL and its mesa clone have let us create 3D on simple desktops (or laptops), whether or not a Z-buffer card is present. Today, 3D a la Avatar is a commodity technique, presented in cinemas and sold for home TV. However, only a few special research centers have systems large enough for entire classes to view 3D, or special immersive facilities like visualization CAVEs or walls, and not everyone finds 3D immersion easy to view. For maximum physics with minimum effort a 3D system must come to each researcher and student. So how do we create 3D visualization cheaply on every desktop for atomistic simulations? After several months of attempts to select commodity equipment for a whole room system, we selected an approach that goes back a long time, even predating GL. The old concept of anaglyphic stereo relies on two images, slightly displaced, and viewed through colored glasses, or two squares of cellophane from a regular screen/projector or poster. We have added this capability to our AViz atomistic visualization code in its new, 6.1 version, which is RedHat, CentOS and Ubuntu compatible. Examples using data from our own research and that of other groups will be given

Development of an automated desktop procedure for defining macro-reaches for river longitudinal profiles

CSIR Research Space (South Africa)

Dollar, LH

2006-07-01

Full Text Available This paper presents an automated desktop procedure for delineating river longitudinal profiles into macro-reaches for use in Ecological Reserve assessments and to aid freshwater ecosystem conservation planning. The procedure was developed for use...

Desktop computer graphics for RMS/payload handling flight design

Science.gov (United States)

Homan, D. J.

1984-01-01

A computer program, the Multi-Adaptive Drawings, Renderings and Similitudes (MADRAS) program, is discussed. The modeling program, written for a desktop computer system (the Hewlett-Packard 9845/C), is written in BASIC and uses modular construction of objects while generating both wire-frame and hidden-line drawings from any viewpoint. The dimensions and placement of objects are user definable. Once the hidden-line calculations are made for a particular viewpoint, the viewpoint may be rotated in pan, tilt, and roll without further hidden-line calculations. The use and results of this program are discussed.

DIaaS: Resource Management System for the Intra-Cloud with On-Premise Desktops

Directory of Open Access Journals (Sweden)

Hyun-Woo Kim

2017-01-01

Full Text Available Infrastructure as a service with desktops (DIaaS based on the extensible mark-up language (XML is herein proposed to utilize surplus resources. DIaaS is a traditional surplus-resource integrated management technology. It is designed to provide fast work distribution and computing services based on user service requests as well as storage services through desktop-based distributed computing and storage resource integration. DIaaS includes a nondisruptive resource service and an auto-scalable scheme to enhance the availability and scalability of intra-cloud computing resources. A performance evaluation of the proposed scheme measured the clustering performance time for surplus resource utilization. The results showed improvement in computing and storage services in a connection of at least two computers compared to the traditional method for high-availability measurement of nondisruptive services. Furthermore, an artificial server error environment was used to create a clustering delay for computing and storage services and for nondisruptive services. It was compared to the Hadoop distributed file system (HDFS.

A Five-Year Hedonic Price Breakdown for Desktop Personal Computer Attributes in Brazil

Directory of Open Access Journals (Sweden)

Nuno Manoel Martins Dias Fouto

2009-07-01

Full Text Available The purpose of this article is to identify the attributes that discriminate the prices of personal desktop computers. We employ the hedonic price method in evaluating such characteristics. This approach allows market prices to be expressed as a function, a set of attributes present in the products and services offered. Prices and characteristics of up to 3,779 desktop personal computers offered in the IT pages of one of the main Brazilian newspapers were collected from January 2003 to December 2007. Several specifications for the hedonic (multivariate linear regression were tested. In this particular study, the main attributes were found to be hard drive capacity, screen technology, main board brand, random memory size, microprocessor brand, video board memory, digital video and compact disk recording devices, screen size and microprocessor speed. These results highlight the novel contribution of this study: the manner and means in which hedonic price indexes may be estimated in Brazil.

Fabrication of low cost soft tissue prostheses with the desktop 3D printer.

Science.gov (United States)

He, Yong; Xue, Guang-huai; Fu, Jian-zhong

2014-11-27

Soft tissue prostheses such as artificial ear, eye and nose are widely used in the maxillofacial rehabilitation. In this report we demonstrate how to fabricate soft prostheses mold with a low cost desktop 3D printer. The fabrication method used is referred to as Scanning Printing Polishing Casting (SPPC). Firstly the anatomy is scanned with a 3D scanner, then a tissue casting mold is designed on computer and printed with a desktop 3D printer. Subsequently, a chemical polishing method is used to polish the casting mold by removing the staircase effect and acquiring a smooth surface. Finally, the last step is to cast medical grade silicone into the mold. After the silicone is cured, the fine soft prostheses can be removed from the mold. Utilizing the SPPC method, soft prostheses with smooth surface and complicated structure can be fabricated at a low cost. Accordingly, the total cost of fabricating ear prosthesis is about $30, which is much lower than the current soft prostheses fabrication methods.

Fatigue monitoring desktop guide

International Nuclear Information System (INIS)

Woods, K.; Thomas, K.

2012-01-01

The development of a program for managing material aging (MMG) in the nuclear industry requires a new and different perspective. The classical method for MMG is cycle counting, which has been shown to have limited success. The classical method has been successful in satisfying the ductile condition per the America Society of Mechanical Engineers' (ASME) design criteria. However, the defined material failure mechanism has transformed from through-wall cracking and leakage (ASME) to crack initiation (NUREG-6909). This transformation is based on current industry experience with material degradation early in plant life and can be attributed to fabrication issues and environment concerns where cycle counting has been unsuccessful. This new perspective provides a different approach to cycle counting that incorporates all of the information about the material conditions. This approach goes beyond the consideration of a static analysis and includes a dynamic assessment of component health, which is required for operating plants. This health definition should consider fabrication, inspections, transient conditions and industry operating experience. In addition, this collection of information can be transparent to a broader audience that may not have a full understanding of the system design or the potential causes of early material degradation. This paper will present the key points that are needed for a successful fatigue monitoring desktop guide. (authors)

Delivering an Alternative Medicine Resource to the User's Desktop via World Wide Web.

Science.gov (United States)

Li, Jie; Wu, Gang; Marks, Ellen; Fan, Weiyu

1998-01-01

Discusses the design and implementation of a World Wide Web-based alternative medicine virtual resource. This homepage integrates regional, national, and international resources and delivers library services to the user's desktop. Goals, structure, and organizational schemes of the system are detailed, and design issues for building such a…

Use of Signaling to Integrate Desktop Virtual Reality and Online Learning Management Systems

Science.gov (United States)

Dodd, Bucky J.; Antonenko, Pavlo D.

2012-01-01

Desktop virtual reality is an emerging educational technology that offers many potential benefits for learners in online learning contexts; however, a limited body of research is available that connects current multimedia learning techniques with these new forms of media. Because most formal online learning is delivered using learning management…

Using Desktop Publishing in an Editing Class--The Lessons Learned and Students' Assessments.

Science.gov (United States)

Tharp, Marty; Zimmerman, Don

1992-01-01

Reports students' perceptions of learning desktop publishing (DTP) systems. Finds that (1) students learned the foundations of DTP in under 60 hours of hands-on experience; (2) the incremental introduction of DTP functions and practice sessions before assignments were the most effective teaching strategy; and (3) use of DTP encouraged nonartistic…

Writing Essays on a Laptop or a Desktop Computer: Does It Matter?

Science.gov (United States)

Ling, Guangming; Bridgeman, Brent

2013-01-01

To explore the potential effect of computer type on the Test of English as a Foreign Language-Internet-Based Test (TOEFL iBT) Writing Test, a sample of 444 international students was used. The students were randomly assigned to either a laptop or a desktop computer to write two TOEFL iBT practice essays in a simulated testing environment, followed…

Effective Web and Desktop Retrieval with Enhanced Semantic Spaces

Science.gov (United States)

Daoud, Amjad M.

We describe the design and implementation of the NETBOOK prototype system for collecting, structuring and efficiently creating semantic vectors for concepts, noun phrases, and documents from a corpus of free full text ebooks available on the World Wide Web. Automatic generation of concept maps from correlated index terms and extracted noun phrases are used to build a powerful conceptual index of individual pages. To ensure scalabilty of our system, dimension reduction is performed using Random Projection [13]. Furthermore, we present a complete evaluation of the relative effectiveness of the NETBOOK system versus the Google Desktop [8].

Fatigue monitoring desktop guide

Energy Technology Data Exchange (ETDEWEB)

Woods, K. [InnoTech Engineering Solutions, LLC (United States); Thomas, K. [Nebraska Public Power District (United States)

2012-07-01

The development of a program for managing material aging (MMG) in the nuclear industry requires a new and different perspective. The classical method for MMG is cycle counting, which has been shown to have limited success. The classical method has been successful in satisfying the ductile condition per the America Society of Mechanical Engineers' (ASME) design criteria. However, the defined material failure mechanism has transformed from through-wall cracking and leakage (ASME) to crack initiation (NUREG-6909). This transformation is based on current industry experience with material degradation early in plant life and can be attributed to fabrication issues and environment concerns where cycle counting has been unsuccessful. This new perspective provides a different approach to cycle counting that incorporates all of the information about the material conditions. This approach goes beyond the consideration of a static analysis and includes a dynamic assessment of component health, which is required for operating plants. This health definition should consider fabrication, inspections, transient conditions and industry operating experience. In addition, this collection of information can be transparent to a broader audience that may not have a full understanding of the system design or the potential causes of early material degradation. This paper will present the key points that are needed for a successful fatigue monitoring desktop guide. (authors)

A Cross-Case Analysis of Gender Issues in Desktop Virtual Reality Learning Environments

Science.gov (United States)

Ausburn, Lynna J.; Martens, Jon; Washington, Andre; Steele, Debra; Washburn, Earlene

2009-01-01

This study examined gender-related issues in using new desktop virtual reality (VR) technology as a learning tool in career and technical education (CTE). Using relevant literature, theory, and cross-case analysis of data and findings, the study compared and analyzed the outcomes of two recent studies conducted by a research team at Oklahoma State…

Accelerating phylogenetics computing on the desktop: experiments with executing UPGMA in programmable logic.

Science.gov (United States)

Davis, J P; Akella, S; Waddell, P H

2004-01-01

Having greater computational power on the desktop for processing taxa data sets has been a dream of biologists/statisticians involved in phylogenetics data analysis. Many existing algorithms have been highly optimized-one example being Felsenstein's PHYLIP code, written in C, for UPGMA and neighbor joining algorithms. However, the ability to process more than a few tens of taxa in a reasonable amount of time using conventional computers has not yielded a satisfactory speedup in data processing, making it difficult for phylogenetics practitioners to quickly explore data sets-such as might be done from a laptop computer. We discuss the application of custom computing techniques to phylogenetics. In particular, we apply this technology to speed up UPGMA algorithm execution by a factor of a hundred, against that of PHYLIP code running on the same PC. We report on these experiments and discuss how custom computing techniques can be used to not only accelerate phylogenetics algorithm performance on the desktop, but also on larger, high-performance computing engines, thus enabling the high-speed processing of data sets involving thousands of taxa.

Virtualisation Devices for Student Learning: Comparison between Desktop-Based (Oculus Rift) and Mobile-Based (Gear VR) Virtual Reality in Medical and Health Science Education

Science.gov (United States)

Moro, Christian; Stromberga, Zane; Stirling, Allan

2017-01-01

Consumer-grade virtual reality has recently become available for both desktop and mobile platforms and may redefine the way that students learn. However, the decision regarding which device to utilise within a curriculum is unclear. Desktop-based VR has considerably higher setup costs involved, whereas mobile-based VR cannot produce the quality of…

Potential Pedagogical Benefits and Limitations of Multimedia Integrated Desktop Video Conferencing Technology for Synchronous Learning

NARCIS (Netherlands)

drs Maurice Schols

2009-01-01

As multimedia gradually becomes more and more an integrated part of video conferencing systems, the use of multimedia integrated desktop video conferencing technology (MIDVCT) will open up new educational possibilities for synchronous learning. However, the possibilities and limitations of this

Visual attention for a desktop virtual environment with ambient scent

Directory of Open Access Journals (Sweden)

Alexander eToet

2013-11-01

Full Text Available In the current study participants explored a desktop virtual environment (VE representing a suburban neighborhood with signs of public disorder (neglect, vandalism and crime, while being exposed to either room air (control group, or subliminal levels of tar (unpleasant; typically associated with burned or waste material or freshly cut grass (pleasant; typically associated with natural or fresh material ambient odor. They reported all signs of disorder they noticed during their walk together with their associated emotional response. Based on recent evidence that odors reflexively direct visual attention to (either semantically or affectively congruent visual objects, we hypothesized that participants would notice more signs of disorder in the presence of ambient tar odor (since this odor may bias attention to unpleasant and negative features, and less signs of disorder in the presence of ambient grass odor (since this odor may bias visual attention towards the vegetation in the environment and away from the signs of disorder. Contrary to our expectations the results show that the presence of an ambient odor did not affect the participants’ visual attention for signs of disorder or their emotional response. We conclude that a closer affective, semantic or spatiotemporal link between the contents of a desktop VE and ambient scents may be required to effectively establish diagnostic associations that guide a user’s attention. In the absence of these direct links, ambient scent may be more diagnostic for the physical environment of the observer as a whole than for the particular items in that environment (or, in this case, items represented in the VE.

Collection and analysis of environmental radiation data using a desktop computer

International Nuclear Information System (INIS)

Gogolak, C.V.

1982-04-01

A portable instrumentation sytem using a Hewlett-Packard HP-9825 desktop computer for the collection and analysis of environmental radiation data is described. Procedures for the transmission of data between the HP-9825 and various nuclear counters are given together with a description of the necessary hardware and software. Complete programs for the analysis of Ge(Li) and NaI(Tl) gamma-ray spectra, high pressure ionization chamber monitor data, 86 Kr monitor data and air filter sample alpha particle activity measurements are presented. Some utility programs, intended to increase system flexibility, are included

Non-Grey Radiation Modeling using Thermal Desktop/Sindaworks TFAWS06-1009

Science.gov (United States)

Anderson, Kevin R.; Paine, Chris

2006-01-01

This paper provides an overview of the non-grey radiation modeling capabilities of Cullimore and Ring's Thermal Desktop(Registered TradeMark) Version 4.8 SindaWorks software. The non-grey radiation analysis theory implemented by Sindaworks and the methodology used by the software are outlined. Representative results from a parametric trade study of a radiation shield comprised of a series of v-grooved shaped deployable panels is used to illustrate the capabilities of the SindaWorks non-grey radiation thermal analysis software using emissivities with temperature and wavelength dependency modeled via a Hagen-Rubens relationship.

Visual attention for a desktop virtual environment with ambient scent.

Science.gov (United States)

Toet, Alexander; van Schaik, Martin G

2013-01-01

In the current study participants explored a desktop virtual environment (VE) representing a suburban neighborhood with signs of public disorder (neglect, vandalism, and crime), while being exposed to either room air (control group), or subliminal levels of tar (unpleasant; typically associated with burned or waste material) or freshly cut grass (pleasant; typically associated with natural or fresh material) ambient odor. They reported all signs of disorder they noticed during their walk together with their associated emotional response. Based on recent evidence that odors reflexively direct visual attention to (either semantically or affectively) congruent visual objects, we hypothesized that participants would notice more signs of disorder in the presence of ambient tar odor (since this odor may bias attention to unpleasant and negative features), and less signs of disorder in the presence of ambient grass odor (since this odor may bias visual attention toward the vegetation in the environment and away from the signs of disorder). Contrary to our expectations the results provide no indication that the presence of an ambient odor affected the participants' visual attention for signs of disorder or their emotional response. However, the paradigm used in present study does not allow us to draw any conclusions in this respect. We conclude that a closer affective, semantic, or spatiotemporal link between the contents of a desktop VE and ambient scents may be required to effectively establish diagnostic associations that guide a user's attention. In the absence of these direct links, ambient scent may be more diagnostic for the physical environment of the observer as a whole than for the particular items in that environment (or, in this case, items represented in the VE).

A VBA Desktop Database for Proposal Processing at National Optical Astronomy Observatories

Science.gov (United States)

Brown, Christa L.

National Optical Astronomy Observatories (NOAO) has developed a relational Microsoft Windows desktop database using Microsoft Access and the Microsoft Office programming language, Visual Basic for Applications (VBA). The database is used to track data relating to observing proposals from original receipt through the review process, scheduling, observing, and final statistical reporting. The database has automated proposal processing and distribution of information. It allows NOAO to collect and archive data so as to query and analyze information about our science programs in new ways.

Economic analysis of cloud-based desktop virtualization implementation at a hospital.

Science.gov (United States)

Yoo, Sooyoung; Kim, Seok; Kim, Taeki; Baek, Rong-Min; Suh, Chang Suk; Chung, Chin Youb; Hwang, Hee

2012-10-30

Cloud-based desktop virtualization infrastructure (VDI) is known as providing simplified management of application and desktop, efficient management of physical resources, and rapid service deployment, as well as connection to the computer environment at anytime, anywhere with any device. However, the economic validity of investing in the adoption of the system at a hospital has not been established. This study computed the actual investment cost of the hospital-wide VDI implementation at the 910-bed Seoul National University Bundang Hospital in Korea and the resulting effects (i.e., reductions in PC errors and difficulties, application and operating system update time, and account management time). Return on investment (ROI), net present value (NPV), and internal rate of return (IRR) indexes used for corporate investment decision-making were used for the economic analysis of VDI implementation. The results of five-year cost-benefit analysis given for 400 Virtual Machines (VMs; i.e., 1,100 users in the case of SNUBH) showed that the break-even point was reached in the fourth year of the investment. At that point, the ROI was 122.6%, the NPV was approximately US$192,000, and the IRR showed an investment validity of 10.8%. From our sensitivity analysis to changing the number of VMs (in terms of number of users), the greater the number of adopted VMs was the more investable the system was. This study confirms that the emerging VDI can have an economic impact on hospital information system (HIS) operation and utilization in a tertiary hospital setting.

Economic analysis of cloud-based desktop virtualization implementation at a hospital

Directory of Open Access Journals (Sweden)

Yoo Sooyoung

2012-10-01

Full Text Available Abstract Background Cloud-based desktop virtualization infrastructure (VDI is known as providing simplified management of application and desktop, efficient management of physical resources, and rapid service deployment, as well as connection to the computer environment at anytime, anywhere with anydevice. However, the economic validity of investing in the adoption of the system at a hospital has not been established. Methods This study computed the actual investment cost of the hospital-wide VDI implementation at the 910-bed Seoul National University Bundang Hospital in Korea and the resulting effects (i.e., reductions in PC errors and difficulties, application and operating system update time, and account management time. Return on investment (ROI, net present value (NPV, and internal rate of return (IRR indexes used for corporate investment decision-making were used for the economic analysis of VDI implementation. Results The results of five-year cost-benefit analysis given for 400 Virtual Machines (VMs; i.e., 1,100 users in the case of SNUBH showed that the break-even point was reached in the fourth year of the investment. At that point, the ROI was 122.6%, the NPV was approximately US$192,000, and the IRR showed an investment validity of 10.8%. From our sensitivity analysis to changing the number of VMs (in terms of number of users, the greater the number of adopted VMs was the more investable the system was. Conclusions This study confirms that the emerging VDI can have an economic impact on hospital information system (HIS operation and utilization in a tertiary hospital setting.

Automated Data Handling And Instrument Control Using Low-Cost Desktop Computers And An IEEE 488 Compatible Version Of The ODETA V.

Science.gov (United States)

van Leunen, J. A. J.; Dreessen, J.

1984-05-01

The result of a measurement of the modulation transfer function is only useful as long as it is accompanied by a complete description of all relevant measuring conditions involved. For this reason it is necessary to file a full description of the relevant measuring conditions together with the results. In earlier times some of our results were rendered useless because some of the relevant measuring conditions were accidentally not written down and were forgotten. This was mainly due to the lack of concensus about which measuring conditions had to be filed together with the result of a measurement. One way to secure uniform and complete archiving of measuring conditions and results is to automate the data handling. An attendent advantage of automation of data handling is that it does away with the time-consuming correction of rough measuring results. The automation of the data handling was accomplished with rather cheap desktop computers, which were powerfull enough, however, to allow us to automate the measurement as well. After automation of the data handling we started with automatic collection of rough measurement data. Step by step we extended the automation by letting the desktop computer control more and more of the measuring set-up. At present the desktop computer controls all the electrical and most of the mechanical measuring conditions. Further it controls and reads the MTF measuring instrument. Focussing and orientation optimization can be fully automatic, semi-automatic or completely manual. MTF measuring results can be collected automatically but they can also be typed in by hand. Due to the automation we are able to implement proper archival of measuring results together with all necessary measuring conditions. The improved measuring efficiency made it possible to increase the number of routine measurements done in the same time period by an order of magnitude. To our surprise the measuring accuracy also improved by a factor of two. This was due to

Students' Beliefs about Mobile Devices vs. Desktop Computers in South Korea and the United States

Science.gov (United States)

Sung, Eunmo; Mayer, Richard E.

2012-01-01

College students in the United States and in South Korea completed a 28-item multidimensional scaling (MDS) questionnaire in which they rated the similarity of 28 pairs of multimedia learning materials on a 10-point scale (e.g., narrated animation on a mobile device Vs. movie clip on a desktop computer) and a 56-item semantic differential…

Rhinoplasty perioperative database using a personal digital assistant.

Science.gov (United States)

Kotler, Howard S

2004-01-01

To construct a reliable, accurate, and easy-to-use handheld computer database that facilitates the point-of-care acquisition of perioperative text and image data specific to rhinoplasty. A user-modified database (Pendragon Forms [v.3.2]; Pendragon Software Corporation, Libertyville, Ill) and graphic image program (Tealpaint [v.4.87]; Tealpaint Software, San Rafael, Calif) were used to capture text and image data, respectively, on a Palm OS (v.4.11) handheld operating with 8 megabytes of memory. The handheld and desktop databases were maintained secure using PDASecure (v.2.0) and GoldSecure (v.3.0) (Trust Digital LLC, Fairfax, Va). The handheld data were then uploaded to a desktop database of either FileMaker Pro 5.0 (v.1) (FileMaker Inc, Santa Clara, Calif) or Microsoft Access 2000 (Microsoft Corp, Redmond, Wash). Patient data were collected from 15 patients undergoing rhinoplasty in a private practice outpatient ambulatory setting. Data integrity was assessed after 6 months' disk and hard drive storage. The handheld database was able to facilitate data collection and accurately record, transfer, and reliably maintain perioperative rhinoplasty data. Query capability allowed rapid search using a multitude of keyword search terms specific to the operative maneuvers performed in rhinoplasty. Handheld computer technology provides a method of reliably recording and storing perioperative rhinoplasty information. The handheld computer facilitates the reliable and accurate storage and query of perioperative data, assisting the retrospective review of one's own results and enhancement of surgical skills.

Radioactive ion beam facilities in Europe

International Nuclear Information System (INIS)

Blumenfeld, Y.

2008-01-01

The past two decades have seen extraordinarily rapid development of radioactive beam physics throughout the world and in particular in Europe. The important scientific advances have stemmed from a large number of facilities. Previously existing stable beam machines have been adapted to produce rare isotope beams and dedicated facilities have come on-line. This talk gives an overview of the present European installations highlighting their complementary nature. The European roadmap calls for the construction of two next generation facilities: FAIR making use of projectile fragmentation and EURISOL based on the ISOL technique. The future FAIR facility will be described and the path towards EURISOL presented in the light of the construction of 'intermediate' generation facilities SPIRAL2, HIE ISOLDE and SPES and results from the ongoing EURISOL Design Study.

Assessment of Two Desk-Top Computer Simulations Used to Train Tactical Decision Making (TDM) of Small Unit Infantry Leaders

National Research Council Canada - National Science Library

Beal, Scott A

2007-01-01

Fifty-two leaders in the Basic Non-Commissioned Officer Course (BNCOC) at Fort Benning, Georgia, participated in an assessment of two desk-top computer simulations used to train tactical decision making...

Mars Propellant Liquefaction Modeling in Thermal Desktop

Science.gov (United States)

Desai, Pooja; Hauser, Dan; Sutherlin, Steven

2017-01-01

NASAs current Mars architectures are assuming the production and storage of 23 tons of liquid oxygen on the surface of Mars over a duration of 500+ days. In order to do this in a mass efficient manner, an energy efficient refrigeration system will be required. Based on previous analysis NASA has decided to do all liquefaction in the propulsion vehicle storage tanks. In order to allow for transient Martian environmental effects, a propellant liquefaction and storage system for a Mars Ascent Vehicle (MAV) was modeled using Thermal Desktop. The model consisted of a propellant tank containing a broad area cooling loop heat exchanger integrated with a reverse turbo Brayton cryocooler. Cryocooler sizing and performance modeling was conducted using MAV diurnal heat loads and radiator rejection temperatures predicted from a previous thermal model of the MAV. A system was also sized and modeled using an alternative heat rejection system that relies on a forced convection heat exchanger. Cryocooler mass, input power, and heat rejection for both systems were estimated and compared against sizing based on non-transient sizing estimates.

GRID : unlimited computing power on your desktop Conference MT17

CERN Multimedia

2001-01-01

The Computational GRID is an analogy to the electrical power grid for computing resources. It decouples the provision of computing, data, and networking from its use, it allows large-scale pooling and sharing of resources distributed world-wide. Every computer, from a desktop to a mainframe or supercomputer, can provide computing power or data for the GRID. The final objective is to plug your computer into the wall and have direct access to huge computing resources immediately, just like plugging-in a lamp to get instant light. The GRID will facilitate world-wide scientific collaborations on an unprecedented scale. It will provide transparent access to major distributed resources of computer power, data, information, and collaborations.

Laevo: A Temporal Desktop Interface for Integrated Knowledge Work

DEFF Research Database (Denmark)

Jeuris, Steven; Houben, Steven; Bardram, Jakob

2014-01-01

Prior studies show that knowledge work is characterized by highly interlinked practices, including task, file and window management. However, existing personal information management tools primarily focus on a limited subset of knowledge work, forcing users to perform additional manual...... states and transitions of an activity. The life cycle is used to inform the design of Laevo, a temporal activity-centric desktop interface for personal knowledge work. Laevo allows users to structure work within dedicated workspaces, managed on a timeline. Through a centralized notification system which...... configuration work to integrate the different tools they use. In order to understand tool usage, we review literature on how users' activities are created and evolve over time as part of knowledge worker practices. From this we derive the activity life cycle, a conceptual framework describing the different...

Fab the coming revolution on your desktop : from personal computers to personal fabrication

CERN Document Server

Gershenfeld, Neil

2005-01-01

What if you could someday put the manufacturing power of an automobile plant on your desktop? According to Neil Gershenfeld, the renowned MIT scientist and inventor, the next big thing is personal fabrication-the ability to design and produce your own products, in your own home, with a machine that combines consumer electronics and industrial tools. Personal fabricators are about to revolutionize the world just as personal computers did a generation ago, and Fab shows us how.

Desk-top microcomputer for lab-scale process control

International Nuclear Information System (INIS)

Overman, R.F.; Byrd, J.S.; Goosey, M.H.; Sand, R.J.

1981-01-01

A desk-top microcomputer was programmed to acquire the data from various process control sensors installed in a laboratory scale liquid-liquid extraction, pulse column facility. The parameters monitored included valve positions, gamma spectra, alpha radioactivity, temperature, pH, density, and flow rates. The program for the microcomputer is written in BASIC and requires about 31000 8-bit bytes of memory. All data is stored on floppy discs, and can be displayed or printed. Unexpected data values are brought to the process operator's attention via CRT display or print-out. The general organization of the program and a few subroutines unique to polling instruments are explained. Some of the data acquisition devices were designed and built at the Savannah River Laboratory. These include a pulse height analyzer, a data multiplexer, and a data acquisition instrument. A general description of the electronics design of these instruments is also given with emphasis placed on data formatting and bus addressing

Direct Desktop Printed-Circuits-on-Paper Flexible Electronics

Science.gov (United States)

Zheng, Yi; He, Zhizhu; Gao, Yunxia; Liu, Jing

2013-01-01

There currently lacks of a way to directly write out electronics, just like printing pictures on paper by an office printer. Here we show a desktop printing of flexible circuits on paper via developing liquid metal ink and related working mechanisms. Through modifying adhesion of the ink, overcoming its high surface tension by dispensing machine and designing a brush like porous pinhead for printing alloy and identifying matched substrate materials among different papers, the slightly oxidized alloy ink was demonstrated to be flexibly printed on coated paper, which could compose various functional electronics and the concept of Printed-Circuits-on-Paper was thus presented. Further, RTV silicone rubber was adopted as isolating inks and packaging material to guarantee the functional stability of the circuit, which suggests an approach for printing 3D hybrid electro-mechanical device. The present work paved the way for a low cost and easygoing method in directly printing paper electronics.

Evaluation of usefulness and availability for orthopedic surgery using clavicle fracture model manufactured by desktop 3D printer

International Nuclear Information System (INIS)

Oh, Wang Kyun

2014-01-01

Usefulness and clinical availability for surgery efficiency were evaluated by conducting pre-operative planning with a model manufactured by desktop 3D printer by using clavicle CT image. The patient-customized clavicle fracture model was manufactured by desktop 3D printer of FDM wire laminated processing method by converting the CT image into STL file in Open Source DICOM Viewer Osirix. Also, the model of the original shape before damaged was restored and manufactured by Mirror technique based on STL file of not fractured clavicle of the other side by using the symmetry feature of the human body. For the model, the position and size, degree of the fracture was equally printed out. Using the clavicle model directly manufactured with low cost and less time in Department of Radiology is considered to be useful because it can reduce secondary damage during surgery and increase surgery efficiency with Minimal invasive percutaneous plate osteosynthesis(MIPO)

Evaluation of usefulness and availability for orthopedic surgery using clavicle fracture model manufactured by desktop 3D printer

Energy Technology Data Exchange (ETDEWEB)

Oh, Wang Kyun [Dept. of Diagnostic Radiology, Cheongju Medical Center, Cheongju (Korea, Republic of)

2014-09-15

Usefulness and clinical availability for surgery efficiency were evaluated by conducting pre-operative planning with a model manufactured by desktop 3D printer by using clavicle CT image. The patient-customized clavicle fracture model was manufactured by desktop 3D printer of FDM wire laminated processing method by converting the CT image into STL file in Open Source DICOM Viewer Osirix. Also, the model of the original shape before damaged was restored and manufactured by Mirror technique based on STL file of not fractured clavicle of the other side by using the symmetry feature of the human body. For the model, the position and size, degree of the fracture was equally printed out. Using the clavicle model directly manufactured with low cost and less time in Department of Radiology is considered to be useful because it can reduce secondary damage during surgery and increase surgery efficiency with Minimal invasive percutaneous plate osteosynthesis(MIPO)

Fabrication of cerebral aneurysm simulator with a desktop 3D printer.

Science.gov (United States)

Liu, Yu; Gao, Qing; Du, Song; Chen, ZiChen; Fu, JianZhong; Chen, Bing; Liu, ZhenJie; He, Yong

2017-05-17

Now, more and more patients are suffering cerebral aneurysm. However, long training time limits the rapid growth of cerebrovascular neurosurgeons. Here we developed a novel cerebral aneurysm simulator which can be better represented the dynamic bulging process of cerebral aneurysm The proposed simulator features the integration of a hollow elastic vascular model, a skull model and a brain model, which can be affordably fabricated at the clinic (Fab@Clinic), under $25.00 each with the help of a low-cost desktop 3D printer. Moreover, the clinical blood flow and pulsation pressure similar to the human can be well simulated, which can be used to train the neurosurgical residents how to clip aneurysms more effectively.

A Personal Desktop Liquid-Metal Printer as a Pervasive Electronics Manufacturing Tool for Society in the Near Future

Directory of Open Access Journals (Sweden)

Jun Yang

2015-12-01

Full Text Available It has long been a dream in the electronics industry to be able to write out electronics directly, as simply as printing a picture onto paper with an office printer. The first-ever prototype of a liquid-metal printer has been invented and demonstrated by our lab, bringing this goal a key step closer. As part of a continuous endeavor, this work is dedicated to significantly extending such technology to the consumer level by making a very practical desktop liquid-metal printer for society in the near future. Through the industrial design and technical optimization of a series of key technical issues such as working reliability, printing resolution, automatic control, human-machine interface design, software, hardware, and integration between software and hardware, a high-quality personal desktop liquid-metal printer that is ready for mass production in industry was fabricated. Its basic features and important technical mechanisms are explained in this paper, along with demonstrations of several possible consumer end-uses for making functional devices such as light-emitting diode (LED displays. This liquid-metal printer is an automatic, easy-to-use, and low-cost personal electronics manufacturing tool with many possible applications. This paper discusses important roles that the new machine may play for a group of emerging needs. The prospective future of this cutting-edge technology is outlined, along with a comparative interpretation of several historical printing methods. This desktop liquid-metal printer is expected to become a basic electronics manufacturing tool for a wide variety of emerging practices in the academic realm, in industry, and in education as well as for individual end-users in the near future.

Does It Matter Whether One Takes a Test on an iPad or a Desktop Computer?

Science.gov (United States)

Ling, Guangming

2016-01-01

To investigate possible iPad related mode effect, we tested 403 8th graders in Indiana, Maryland, and New Jersey under three mode conditions through random assignment: a desktop computer, an iPad alone, and an iPad with an external keyboard. All students had used an iPad or computer for six months or longer. The 2-hour test included reading, math,…

The Taverna workflow suite: designing and executing workflows of Web Services on the desktop, web or in the cloud

NARCIS (Netherlands)

Wolstencroft, K.; Haines, R.; Fellows, D.; Williams, A.; Withers, D.; Owen, S.; Soiland-Reyes, S.; Dunlop, I.; Nenadic, A.; Fisher, P.; Bhagat, J.; Belhajjame, K.; Bacall, F.; Hardisty, A.; Nieva de la Hidalga, A.; Balcazar Vargas, M.P.; Sufi, S.; Goble, C.

2013-01-01

The Taverna workflow tool suite (http://www.taverna.org.uk) is designed to combine distributed Web Services and/or local tools into complex analysis pipelines. These pipelines can be executed on local desktop machines or through larger infrastructure (such as supercomputers, Grids or cloud

Desktop publishing and medical imaging: paper as hardcopy medium for digital images.

Science.gov (United States)

Denslow, S

1994-08-01

Desktop-publishing software and hardware has progressed to the point that many widely used word-processing programs are capable of printing high-quality digital images with many shades of gray from black to white. Accordingly, it should be relatively easy to print digital medical images on paper for reports, instructional materials, and in research notes. Components were assembled that were necessary for extracting image data from medical imaging devices and converting the data to a form usable by word-processing software. A system incorporating these components was implemented in a medical setting and has been operating for 18 months. The use of this system by medical staff has been monitored.

Improvements in fast-response flood modeling: desktop parallel computing and domain tracking

Energy Technology Data Exchange (ETDEWEB)

Judi, David R [Los Alamos National Laboratory; Mcpherson, Timothy N [Los Alamos National Laboratory; Burian, Steven J [UNIV. OF UTAH

2009-01-01

It is becoming increasingly important to have the ability to accurately forecast flooding, as flooding accounts for the most losses due to natural disasters in the world and the United States. Flood inundation modeling has been dominated by one-dimensional approaches. These models are computationally efficient and are considered by many engineers to produce reasonably accurate water surface profiles. However, because the profiles estimated in these models must be superimposed on digital elevation data to create a two-dimensional map, the result may be sensitive to the ability of the elevation data to capture relevant features (e.g. dikes/levees, roads, walls, etc...). Moreover, one-dimensional models do not explicitly represent the complex flow processes present in floodplains and urban environments and because two-dimensional models based on the shallow water equations have significantly greater ability to determine flow velocity and direction, the National Research Council (NRC) has recommended that two-dimensional models be used over one-dimensional models for flood inundation studies. This paper has shown that two-dimensional flood modeling computational time can be greatly reduced through the use of Java multithreading on multi-core computers which effectively provides a means for parallel computing on a desktop computer. In addition, this paper has shown that when desktop parallel computing is coupled with a domain tracking algorithm, significant computation time can be eliminated when computations are completed only on inundated cells. The drastic reduction in computational time shown here enhances the ability of two-dimensional flood inundation models to be used as a near-real time flood forecasting tool, engineering, design tool, or planning tool. Perhaps even of greater significance, the reduction in computation time makes the incorporation of risk and uncertainty/ensemble forecasting more feasible for flood inundation modeling (NRC 2000; Sayers et al

Emission of particulate matter from a desktop three-dimensional (3D) printer

Science.gov (United States)

Yi, Jinghai; LeBouf, Ryan F.; Duling, Matthew G.; Nurkiewicz, Timothy; Chen, Bean T.; Schwegler-Berry, Diane; Virji, M. Abbas; Stefaniak, Aleksandr B.

2016-01-01

ABSTRACT Desktop three-dimensional (3D) printers are becoming commonplace in business offices, public libraries, university labs and classrooms, and even private homes; however, these settings are generally not designed for exposure control. Prior experience with a variety of office equipment devices such as laser printers that emit ultrafine particles (UFP) suggests the need to characterize 3D printer emissions to enable reliable risk assessment. The aim of this study was to examine factors that influence particulate emissions from 3D printers and characterize their physical properties to inform risk assessment. Emissions were evaluated in a 0.5-m3 chamber and in a small room (32.7 m3) using real-time instrumentation to measure particle number, size distribution, mass, and surface area. Factors evaluated included filament composition and color, as well as the manufacturer-provided printer emissions control technologies while printing an object. Filament type significantly influenced emissions, with acrylonitrile butadiene styrene (ABS) emitting larger particles than polylactic acid (PLA), which may have been the result of agglomeration. Geometric mean particle sizes and total particle (TP) number and mass emissions differed significantly among colors of a given filament type. Use of a cover on the printer reduced TP emissions by a factor of 2. Lung deposition calculations indicated a threefold higher PLA particle deposition in alveoli compared to ABS. Desktop 3D printers emit high levels of UFP, which are released into indoor environments where adequate ventilation may not be present to control emissions. Emissions in nonindustrial settings need to be reduced through the use of a hierarchy of controls, beginning with device design, followed by engineering controls (ventilation) and administrative controls such as choice of filament composition and color. PMID:27196745

Emission of particulate matter from a desktop three-dimensional (3D) printer.

Science.gov (United States)

Yi, Jinghai; LeBouf, Ryan F; Duling, Matthew G; Nurkiewicz, Timothy; Chen, Bean T; Schwegler-Berry, Diane; Virji, M Abbas; Stefaniak, Aleksandr B

2016-01-01

Desktop three-dimensional (3D) printers are becoming commonplace in business offices, public libraries, university labs and classrooms, and even private homes; however, these settings are generally not designed for exposure control. Prior experience with a variety of office equipment devices such as laser printers that emit ultrafine particles (UFP) suggests the need to characterize 3D printer emissions to enable reliable risk assessment. The aim of this study was to examine factors that influence particulate emissions from 3D printers and characterize their physical properties to inform risk assessment. Emissions were evaluated in a 0.5-m(3) chamber and in a small room (32.7 m(3)) using real-time instrumentation to measure particle number, size distribution, mass, and surface area. Factors evaluated included filament composition and color, as well as the manufacturer-provided printer emissions control technologies while printing an object. Filament type significantly influenced emissions, with acrylonitrile butadiene styrene (ABS) emitting larger particles than polylactic acid (PLA), which may have been the result of agglomeration. Geometric mean particle sizes and total particle (TP) number and mass emissions differed significantly among colors of a given filament type. Use of a cover on the printer reduced TP emissions by a factor of 2. Lung deposition calculations indicated a threefold higher PLA particle deposition in alveoli compared to ABS. Desktop 3D printers emit high levels of UFP, which are released into indoor environments where adequate ventilation may not be present to control emissions. Emissions in nonindustrial settings need to be reduced through the use of a hierarchy of controls, beginning with device design, followed by engineering controls (ventilation) and administrative controls such as choice of filament composition and color.

BDE-209 in the Australian Environment: Desktop review

Energy Technology Data Exchange (ETDEWEB)

English, Karin, E-mail: k.english@uq.edu.au [School of Medicine, The University of Queensland, Brisbane (Australia); Children’s Health and Environment Program, Child Health Research Centre, The University of Queensland, Brisbane (Australia); Queensland Children’s Medical Research Institute, Children’s Health Research Centre, Brisbane (Australia); Toms, Leisa-Maree L. [School of Public Health and Social Work, and Institute of Health and Biomedical Innovation, Queensland University of Technology, Brisbane (Australia); Gallen, Christie; Mueller, Jochen F. [The University of Queensland, National Research Centre for Environmental Toxicology (Entox), Brisbane (Australia)

2016-12-15

The commercial polybrominated diphenyl ether (PBDE) flame retardant mixture c-decaBDE is now being considered for listing on the Stockholm Convention on Persistent Organic Pollutants. The aim of our study was to review the literature regarding the use and detection of BDE-209, a major component of c-decaBDE, in consumer products and provide a best estimate of goods that are likely to contain BDE-209 in Australia. This review is part of a larger study, which will include quantitative testing of items to assess for BDE-209. The findings of this desktop review will be used to determine which items should be prioritized for quantitative testing. We identified that electronics, particularly televisions, computers, small household appliances and power boards, were the items that were most likely to contain BDE-209 in Australia. Further testing of these items should include items of various ages. Several other items were identified as high priority for future testing, including transport vehicles, building materials and textiles in non-domestic settings. The findings from this study will aid in the development of appropriate policies, should listing of c-decaBDE on the Stockholm Convention and Australia’s ratification of that listing proceed.

BDE-209 in the Australian Environment: Desktop review

International Nuclear Information System (INIS)

English, Karin; Toms, Leisa-Maree L.; Gallen, Christie; Mueller, Jochen F.

2016-01-01

The commercial polybrominated diphenyl ether (PBDE) flame retardant mixture c-decaBDE is now being considered for listing on the Stockholm Convention on Persistent Organic Pollutants. The aim of our study was to review the literature regarding the use and detection of BDE-209, a major component of c-decaBDE, in consumer products and provide a best estimate of goods that are likely to contain BDE-209 in Australia. This review is part of a larger study, which will include quantitative testing of items to assess for BDE-209. The findings of this desktop review will be used to determine which items should be prioritized for quantitative testing. We identified that electronics, particularly televisions, computers, small household appliances and power boards, were the items that were most likely to contain BDE-209 in Australia. Further testing of these items should include items of various ages. Several other items were identified as high priority for future testing, including transport vehicles, building materials and textiles in non-domestic settings. The findings from this study will aid in the development of appropriate policies, should listing of c-decaBDE on the Stockholm Convention and Australia’s ratification of that listing proceed.

76 FR 176 - Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2011-01-03

... Hewlett Packard Company. The workers are engaged in marketing, sales, call center, customer experience... Group--Desktop (Cupertino only), Customer Warranty, Emerging Business, Supply Chain, Volume Operations... Hewlett Packard Company, Personal Systems Group--Desktop (Fort Collins only), Customer Warranty, Emerging...

Los Alamos radiation transport code system on desktop computing platforms

International Nuclear Information System (INIS)

Briesmeister, J.F.; Brinkley, F.W.; Clark, B.A.; West, J.T.

1990-01-01

The Los Alamos Radiation Transport Code System (LARTCS) consists of state-of-the-art Monte Carlo and discrete ordinates transport codes and data libraries. These codes were originally developed many years ago and have undergone continual improvement. With a large initial effort and continued vigilance, the codes are easily portable from one type of hardware to another. The performance of scientific work-stations (SWS) has evolved to the point that such platforms can be used routinely to perform sophisticated radiation transport calculations. As the personal computer (PC) performance approaches that of the SWS, the hardware options for desk-top radiation transport calculations expands considerably. The current status of the radiation transport codes within the LARTCS is described: MCNP, SABRINA, LAHET, ONEDANT, TWODANT, TWOHEX, and ONELD. Specifically, the authors discuss hardware systems on which the codes run and present code performance comparisons for various machines

Proposal for the award of blanket contracts for the supply of Intel-based desktop PCs, display monitors and portable PCs

CERN Document Server

2000-01-01

This document concerns the award of blanket contracts for the supply of the three following categories of equipment for the period 2001-2004: a) desktop PCs (complete PC systems but without display monitors), b) display monitors (conventional CRTs or flat screen LCDs) and c) portable PCs (also called notebooks or laptops). Following a market survey carried out among 41 firms in fourteen Member States, an invitation to tender (IT-2692/IT) was sent on 19 May 2000 to 12 firms and three consortia, each consisting of two firms, in five Member States. By the closing date, CERN had received seven tenders, all from the Swiss subsidiaries of the firms and consortia. The Finance Committee is invited to agree to the negotiation of - blanket contracts with VOBIS (CH), ELONEX (CH) and FUJITSU-SIEMENS (CH), the three lowest bidders complying with the specification, for the supply of Desktop PCs; - blanket contracts with VOBIS (CH), SYNOPTIC (CH) and ELONEX (CH), the three lowest bidders offering display monitors manufactur...

Computing on the Desktop: From Batch to Online in Two Large Danish Service Bureaus

DEFF Research Database (Denmark)

Jørgensen, Anker Helms

The advent of the personal computer is often hailed as the major step towards empowering the computer user. This step was indeed significant, but it was preceeded by a similar step some 10-15 years earlier: the advent of the video terminal or ”glass–TTY”. The video terminal invaded the desktop...... of many while collar workers and the workplace of many blue collar workers in the 1970s and 1980s. It replaced batch processing and facilitated direct, interactive access to computing services. This had a considerable impact on working conditions. This paper addresses this transition in two large Danish...

Effects of Desktop Virtual Reality Environment Training on State Anxiety and Vocational Identity Scores among Persons with Disabilities during Job Placement

Science.gov (United States)

Washington, Andre Lamont

2013-01-01

This study examined how desktop virtual reality environment training (DVRET) affected state anxiety and vocational identity of vocational rehabilitation services consumers during job placement/job readiness activities. It utilized a quantitative research model with a quasi-experimental pretest-posttest design plus some qualitative descriptive…

A Desktop Screen Sharing System based on Various Connection Methods

Science.gov (United States)

Negishi, Yuya; Kawaguchi, Nobuo

Recently it became very common to use information devices such as PCs during presentations and discussions. In these situations, a need arises for techniques that allow a smooth switch of presenters without changing cables, or an easy screen sharing in case of remote videoconferences. In this paper, we propose a desktop screen sharing system that can be used for such purposes and situations. For that, we designed an automatic control of connections in the VNC system that can be operated remotely over the network. We also suggested an interface that assigns a role such as “Screen sender" or “Screen receiver" to each terminal. In the proposed system, while sharing a screen between multiple terminals, one can easily display and browse the screen without having to understand how the others are connected. We also implemented a “role card" using contactless IC card, where roles are assigned only by placing the card in the IC reader.

libLocation: acceso a dispositivos de localización para gvSIG Desktop y Mobile

OpenAIRE

Jordán Aldasorro, Juan G.; Planells Jiménez, Manuel

2009-01-01

Inicialmente integrada en el piloto de gvSIG Mobile, la librería libLocation tiene como objetivo dotar a los proyectos gvSIG Desktop y gvSIG Mobile un acceso transparente a fuentes de localización. La librería se fundamenta en las especificaciones JSR-179 -API de localización para J2ME- y JSR-293 -API de localización para J2ME v2.0-, proporcionando una interfaz uniforme a diferentes fuentes de localización, mediante funciones de alto nivel. Asimismo, se extiende la funcionalida...

A Collaborative Digital Pathology System for Multi-Touch Mobile and Desktop Computing Platforms

KAUST Repository

Jeong, W.

2013-06-13

Collaborative slide image viewing systems are becoming increasingly important in pathology applications such as telepathology and E-learning. Despite rapid advances in computing and imaging technology, current digital pathology systems have limited performance with respect to remote viewing of whole slide images on desktop or mobile computing devices. In this paper we present a novel digital pathology client-server system that supports collaborative viewing of multi-plane whole slide images over standard networks using multi-touch-enabled clients. Our system is built upon a standard HTTP web server and a MySQL database to allow multiple clients to exchange image and metadata concurrently. We introduce a domain-specific image-stack compression method that leverages real-time hardware decoding on mobile devices. It adaptively encodes image stacks in a decorrelated colour space to achieve extremely low bitrates (0.8 bpp) with very low loss of image quality. We evaluate the image quality of our compression method and the performance of our system for diagnosis with an in-depth user study. Collaborative slide image viewing systems are becoming increasingly important in pathology applications such as telepathology and E-learning. Despite rapid advances in computing and imaging technology, current digital pathology systems have limited performance with respect to remote viewing of whole slide images on desktop or mobile computing devices. In this paper we present a novel digital pathology client-server systems that supports collaborative viewing of multi-plane whole slide images over standard networks using multi-touch enabled clients. Our system is built upon a standard HTTP web server and a MySQL database to allow multiple clients to exchange image and metadata concurrently. © 2013 The Eurographics Association and John Wiley & Sons Ltd.

A Collaborative Digital Pathology System for Multi-Touch Mobile and Desktop Computing Platforms

KAUST Repository

Jeong, W.; Schneider, J.; Hansen, A.; Lee, M.; Turney, S. G.; Faulkner-Jones, B. E.; Hecht, J. L.; Najarian, R.; Yee, E.; Lichtman, J. W.; Pfister, H.

2013-01-01

Collaborative slide image viewing systems are becoming increasingly important in pathology applications such as telepathology and E-learning. Despite rapid advances in computing and imaging technology, current digital pathology systems have limited performance with respect to remote viewing of whole slide images on desktop or mobile computing devices. In this paper we present a novel digital pathology client-server system that supports collaborative viewing of multi-plane whole slide images over standard networks using multi-touch-enabled clients. Our system is built upon a standard HTTP web server and a MySQL database to allow multiple clients to exchange image and metadata concurrently. We introduce a domain-specific image-stack compression method that leverages real-time hardware decoding on mobile devices. It adaptively encodes image stacks in a decorrelated colour space to achieve extremely low bitrates (0.8 bpp) with very low loss of image quality. We evaluate the image quality of our compression method and the performance of our system for diagnosis with an in-depth user study. Collaborative slide image viewing systems are becoming increasingly important in pathology applications such as telepathology and E-learning. Despite rapid advances in computing and imaging technology, current digital pathology systems have limited performance with respect to remote viewing of whole slide images on desktop or mobile computing devices. In this paper we present a novel digital pathology client-server systems that supports collaborative viewing of multi-plane whole slide images over standard networks using multi-touch enabled clients. Our system is built upon a standard HTTP web server and a MySQL database to allow multiple clients to exchange image and metadata concurrently. © 2013 The Eurographics Association and John Wiley & Sons Ltd.

The Learner Characteristics, Features of Desktop 3D Virtual Reality Environments, and College Chemistry Instruction: A Structural Equation Modeling Analysis

Science.gov (United States)

Merchant, Zahira; Goetz, Ernest T.; Keeney-Kennicutt, Wendy; Kwok, Oi-man; Cifuentes, Lauren; Davis, Trina J.

2012-01-01

We examined a model of the impact of a 3D desktop virtual reality environment on the learner characteristics (i.e. perceptual and psychological variables) that can enhance chemistry-related learning achievements in an introductory college chemistry class. The relationships between the 3D virtual reality features and the chemistry learning test as…

The CosmicWatch Desktop Muon Detector: a self-contained, pocket sized particle detector

Science.gov (United States)

Axani, S. N.; Frankiewicz, K.; Conrad, J. M.

2018-03-01

The CosmicWatch Desktop Muon Detector is a self-contained, hand-held cosmic ray muon detector that is valuable for astro/particle physics research applications and outreach. The material cost of each detector is under 100 and it takes a novice student approximately four hours to build their first detector. The detectors are powered via a USB connection and the data can either be recorded directly to a computer or to a microSD card. Arduino- and Python-based software is provided to operate the detector and an online application to plot the data in real-time. In this paper, we describe the various design features, evaluate the performance, and illustrate the detectors capabilities by providing several example measurements.

MultiSpec: A Desktop and Online Geospatial Image Data Processing Tool

Science.gov (United States)

Biehl, L. L.; Hsu, W. K.; Maud, A. R. M.; Yeh, T. T.

2017-12-01

MultiSpec is an easy to learn and use, freeware image processing tool for interactively analyzing a broad spectrum of geospatial image data, with capabilities such as image display, unsupervised and supervised classification, feature extraction, feature enhancement, and several other functions. Originally developed for Macintosh and Windows desktop computers, it has a community of several thousand users worldwide, including researchers and educators, as a practical and robust solution for analyzing multispectral and hyperspectral remote sensing data in several different file formats. More recently MultiSpec was adapted to run in the HUBzero collaboration platform so that it can be used within a web browser, allowing new user communities to be engaged through science gateways. MultiSpec Online has also been extended to interoperate with other components (e.g., data management) in HUBzero through integration with the geospatial data building blocks (GABBs) project. This integration enables a user to directly launch MultiSpec Online from data that is stored and/or shared in a HUBzero gateway and to save output data from MultiSpec Online to hub storage, allowing data sharing and multi-step workflows without having to move data between different systems. MultiSpec has also been used in K-12 classes for which one example is the GLOBE program (www.globe.gov) and in outreach material such as that provided by the USGS (eros.usgs.gov/educational-activities). MultiSpec Online now provides teachers with another way to use MultiSpec without having to install the desktop tool. Recently MultiSpec Online was used in a geospatial data session with 30-35 middle school students at the Turned Onto Technology and Leadership (TOTAL) Camp in the summers of 2016 and 2017 at Purdue University. The students worked on a flood mapping exercise using Landsat 5 data to learn about land remote sensing using supervised classification techniques. Online documentation is available for Multi

Qualitative research ethics on the spot: Not only on the desktop.

Science.gov (United States)

Øye, Christine; Sørensen, Nelli Øvre; Glasdam, Stinne

2016-06-01

The increase in medical ethical regulations and bureaucracy handled by institutional review boards and healthcare institutions puts the researchers using qualitative methods in a challenging position. Based on three different cases from three different research studies, the article explores and discusses research ethical dilemmas. First, and especially, the article addresses the challenges for gatekeepers who influence the informant's decisions to participate in research. Second, the article addresses the challenges in following research ethical guidelines related to informed consent and doing no harm. Third, the article argues for the importance of having research ethical guidelines and review boards to question and discuss the possible ethical dilemmas that occur in qualitative research. Research ethics must be understood in qualitative research as relational, situational, and emerging. That is, that focus on ethical issues and dilemmas has to be paid attention on the spot and not only at the desktop. © The Author(s) 2015.

Development, Implementation, and Analysis of Desktop-Scale Model Industrial Equipment and a Critical Thinking Rubric for Use in Chemical Engineering Education

Science.gov (United States)

Golter, Paul B.

2011-01-01

In order to address some of the challenges facing engineering education, namely the demand that students be better prepared to practice professional as well as technical skills, we have developed an intervention consisting of equipment, assessments and a novel pedagogy. The equipment consists of desktop-scale replicas of common industrial…

Attack Potential Evaluation in Desktop and Smartphone Fingerprint Sensors: Can They Be Attacked by Anyone?

Directory of Open Access Journals (Sweden)

Ines Goicoechea-Telleria

2018-01-01

Full Text Available The use of biometrics keeps growing. Every day, we use biometric recognition to unlock our phones or to have access to places such as the gym or the office, so we rely on the security manufacturers offer when protecting our privileges and private life. It is well known that it is possible to hack into a fingerprint sensor using fake fingers made of Play-Doh and other easy-to-obtain materials but to what extent? Is this true for all users or only for specialists with a deep knowledge on biometrics? Are smartphone fingerprint sensors as reliable as desktop sensors? To answer these questions, we performed 3 separate evaluations. First, we evaluated 4 desktop fingerprint sensors of different technologies by attacking them with 7 different fake finger materials. All of them were successfully attacked by an experienced attacker. Secondly, we carried out a similar test on 5 smartphones with embedded sensors using the most successful materials, which also hacked the 5 sensors. Lastly, we gathered 15 simulated attackers with no background in biometrics to create fake fingers of several materials, and they had one week to attack the fingerprint sensors of the same 5 smartphones, with the starting point of a short video with the techniques to create them. All 5 smartphones were successfully attacked by an inexperienced attacker. This paper will provide the results achieved, as well as an analysis on the attack potential of every case. All results are given following the metrics of the standard ISO/IEC 30107-3.

Assessing soil erosion risk using RUSLE through a GIS open source desktop and web application.

Science.gov (United States)

Duarte, L; Teodoro, A C; Gonçalves, J A; Soares, D; Cunha, M

2016-06-01

Soil erosion is a serious environmental problem. An estimation of the expected soil loss by water-caused erosion can be calculated considering the Revised Universal Soil Loss Equation (RUSLE). Geographical Information Systems (GIS) provide different tools to create categorical maps of soil erosion risk which help to study the risk assessment of soil loss. The objective of this study was to develop a GIS open source application (in QGIS), using the RUSLE methodology for estimating erosion rate at the watershed scale (desktop application) and provide the same application via web access (web application). The applications developed allow one to generate all the maps necessary to evaluate the soil erosion risk. Several libraries and algorithms from SEXTANTE were used to develop these applications. These applications were tested in Montalegre municipality (Portugal). The maps involved in RUSLE method-soil erosivity factor, soil erodibility factor, topographic factor, cover management factor, and support practices-were created. The estimated mean value of the soil loss obtained was 220 ton km(-2) year(-1) ranged from 0.27 to 1283 ton km(-2) year(-1). The results indicated that most of the study area (80 %) is characterized by very low soil erosion level (soil erosion was higher than 962 ton km(-2) year(-1). It was also concluded that areas with high slope values and bare soil are related with high level of erosion and the higher the P and C values, the higher the soil erosion percentage. The RUSLE web and the desktop application are freely available.

Do small fish mean no voucher? Using a flatbed desktop scanner to document larval and small specimens before destructive analyses

Czech Academy of Sciences Publication Activity Database

Kalous, L.; Šlechtová, Věra; Petrtýl, M.; Kohout, Jan; Čech, Martin

2010-01-01

Roč. 26, č. 4 (2010), s. 614-617 ISSN 0175-8659 R&D Projects: GA ČR GA206/06/1371; GA ČR GP206/09/P266 Institutional research plan: CEZ:AV0Z50450515; CEZ:AV0Z60170517 Keywords : small fish * voucher * desktop scanner Subject RIV: GL - Fishing Impact factor: 0.945, year: 2010

Desktop Modeling and Simulation: Parsimonious, yet Effective Discrete-Event Simulation Analysis

Science.gov (United States)

Bradley, James R.

2012-01-01

This paper evaluates how quickly students can be trained to construct useful discrete-event simulation models using Excel The typical supply chain used by many large national retailers is described, and an Excel-based simulation model is constructed of it The set of programming and simulation skills required for development of that model are then determined we conclude that six hours of training are required to teach the skills to MBA students . The simulation presented here contains all fundamental functionallty of a simulation model, and so our result holds for any discrete-event simulation model. We argue therefore that Industry workers with the same technical skill set as students having completed one year in an MBA program can be quickly trained to construct simulation models. This result gives credence to the efficacy of Desktop Modeling and Simulation whereby simulation analyses can be quickly developed, run, and analyzed with widely available software, namely Excel.

FRAMEWORK PARA CONVERSÃO DE APLICATIVOS DELPHI DESKTOP EM APLICATIVOS ANDROID NATIVO

Directory of Open Access Journals (Sweden)

Rodrigo da Silva Riquena

2014-08-01

Full Text Available With the growing use of mobile devices by companies and organizations there is an increasing demand applications in production mobile platform. For certain companies, business success may depend on a mobile application which approaches the customers or improve the performance of internal processes. However, developing software for the mobile platform is an expensive process which takes time and resources. A framework to convert Delphi Desktop applications into native Android applications in an automatic way constitutes a useful tool for architects and software developers can contribute with the implementation phase of the application. Therefore, this work is based on methods and processes for software reengineering as the PRE / OO (Process of Reengineering Object Oriented, for automatic conversion of an application developed in Delphi environment in an application for Android mobile platform. At last, an experiment was performed with a real case to corroborate the goals.

CLOUD-BASED VS DESKTOP-BASED PROPERTY MANAGEMENT SYSTEMS IN HOTEL

Directory of Open Access Journals (Sweden)

Mustafa\tGULMEZ

2015-06-01

Full Text Available Even though keeping up with the modern developments in IT sector is crucial for the success and competitiveness of a hotel, it is usually very hard for new technologies to be accepted and implemented. This is the case with the cloud technology for which the opinions between hoteliers are divided on those who think that it is just another fashion trend, unnecessary to be taken into consideration and those that believe that it helps in performing daily operations more easily, leaving space for more interaction with guests both in virtual and real world. Usage of cloud technology in hotels is still in its beginning phase and hoteliers still have to learn more about its advantages and adequate usage for the benefit of overall hotel operating. On the example of hotel property management system (PMS and comparison between features of its older desktop-version and new web-based programs, this research aims at finding out at which stage and how effective is usage of cloud technology in hotels. For this, qualitative research with semi-structured interviews with hotel mangers that use one of these programs was conducted. Reasons for usage and advantages of each version are discussed.

Development, implementation, and analysis of desktop-scale model industrial equipment and a critical thinking rubric for use in chemical engineering education

Science.gov (United States)

Golter, Paul B.

In order to address some of the challenges facing engineering education, namely the demand that students be better prepared to practice professional as well as technical skills, we have developed an intervention consisting of equipment, assessments and a novel pedagogy. The equipment consists of desktop-scale replicas of common industrial equipment. These are implemented in the form of modular cartridges that can be interchanged in a base unit containing water, power and instrumentation. These Desktop Learning Modules (DLMs) are effective at providing a hands on experience in most classroom environments without requiring either water or power hook-ups. Furthermore, the DLMs respond quickly enough that multiple experiments by multiple groups can be run in a single one hour class. We refined an existing critical thinking rubric to be more specific to the realm of engineering problem solving. By altering our pedagogy to a project based environment using the critical thinking rubric as a primary grading tool, we are able to observe and measure the critical thinking skills of student groups. This rubric is corroborated with an industrial perspective and measures constructs that are important to the students' future careers.

Implementation Issues of Virtual Desktop Infrastructure and Its Case Study for a Physician's Round at Seoul National University Bundang Hospital

OpenAIRE

Yoo, Sooyoung; Kim, Seok; Kim, Taegi; Kim, Jon Soo; Baek, Rong-Min; Suh, Chang Suk; Chung, Chin Youb; Hwang, Hee

2012-01-01

Objectives The cloud computing-based virtual desktop infrastructure (VDI) allows access to computing environments with no limitations in terms of time or place such that it can permit the rapid establishment of a mobile hospital environment. The objective of this study was to investigate the empirical issues to be considered when establishing a virtual mobile environment using VDI technology in a hospital setting and to examine the utility of the technology with an Apple iPad during a physici...

Usability Comparisons of Head-Mounted vs. Stereoscopic Desktop Displays in a Virtual Reality Environment with Pain Patients.

Science.gov (United States)

Tong, Xin; Gromala, Diane; Gupta, Dimple; Squire, Pam

2016-01-01

Researchers have shown that immersive Virtual Reality (VR) can serve as an unusually powerful pain control technique. However, research assessing the reported symptoms and negative effects of VR systems indicate that it is important to ascertain if these symptoms arise from the use of particular VR display devices, particularly for users who are deemed "at risk," such as chronic pain patients Moreover, these patients have specific and often complex needs and requirements, and because basic issues such as 'comfort' may trigger anxiety or panic attacks, it is important to examine basic questions of the feasibility of using VR displays. Therefore, this repeated-measured experiment was conducted with two VR displays: the Oculus Rift's head-mounted display (HMD) and Firsthand Technologies' immersive desktop display, DeepStream3D. The characteristics of these immersive desktop displays differ: one is worn, enabling patients to move their heads, while the other is peered into, allowing less head movement. To assess the severity of physical discomforts, 20 chronic pain patients tried both displays while watching a VR pain management demo in clinical settings. Results indicated that participants experienced higher levels of Simulator Sickness using the Oculus Rift HMD. However, results also indicated other preferences of the two VR displays among patients, including physical comfort levels and a sense of immersion. Few studies have been conducted that compare usability of specific VR devices specifically with chronic pain patients using a therapeutic virtual environment in pain clinics. Thus, the results may help clinicians and researchers to choose the most appropriate VR displays for chronic pain patients and guide VR designers to enhance the usability of VR displays for long-term pain management interventions.

A Unified Algorithm for Virtual Desktops Placement in Distributed Cloud Computing

Directory of Open Access Journals (Sweden)

Jiangtao Zhang

2016-01-01

Full Text Available Distributed cloud has been widely adopted to support service requests from dispersed regions, especially for large enterprise which requests virtual desktops for multiple geodistributed branch companies. The cloud service provider (CSP aims to deliver satisfactory services at the least cost. CSP selects proper data centers (DCs closer to the branch companies so as to shorten the response time to user request. At the same time, it also strives to cut cost considering both DC level and server level. At DC level, the expensive long distance inter-DC bandwidth consumption should be reduced and lower electricity price is sought. Inside each tree-like DC, servers are trying to be used as little as possible so as to save equipment cost and power. In nature, there is a noncooperative relation between the DC level and server level in the selection. To attain these objectives and capture the noncooperative relation, multiobjective bilevel programming is used to formulate the problem. Then a unified genetic algorithm is proposed to solve the problem which realizes the selection of DC and server simultaneously. The extensive simulation shows that the proposed algorithm outperforms baseline algorithm in both quality of service guaranteeing and cost saving.

Detection of analyte binding to microarrays using gold nanoparticle labels and a desktop scanner

DEFF Research Database (Denmark)

Han, Anpan; Dufva, Martin; Belleville, Erik

2003-01-01

on gold nanoparticle labeled antibodies visualized by a commercial, office desktop flatbed scanner. Scanning electron microscopy studies showed that the signal from the flatbed scanner was proportional to the surface density of the bound antibody-gold conjugates, and that the flatbed scanner could detect...... six attomoles of antibody-gold conjugates. This detection system was used in a competitive immunoassay to measure the concentration of the pesticide metabolite 2,6-dichlorobenzamide (BAM) in water samples. The results showed that the gold labeled antibodies functioned comparably with a fluorescent...... based immunoassay for detecting BAM in water. A qualitative immunoassay based on gold-labeled antibodies could determineif a water sample contained BAM above and below 60-70 ng L(-1), which is below the maximum allowed BAM concentration for drinking water (100 ng L(-1)) according to European Union...

New generation of 3D desktop computer interfaces

Science.gov (United States)

Skerjanc, Robert; Pastoor, Siegmund

1997-05-01

Today's computer interfaces use 2-D displays showing windows, icons and menus and support mouse interactions for handling programs and data files. The interface metaphor is that of a writing desk with (partly) overlapping sheets of documents placed on its top. Recent advances in the development of 3-D display technology give the opportunity to take the interface concept a radical stage further by breaking the design limits of the desktop metaphor. The major advantage of the envisioned 'application space' is, that it offers an additional, immediately perceptible dimension to clearly and constantly visualize the structure and current state of interrelations between documents, videos, application programs and networked systems. In this context, we describe the development of a visual operating system (VOS). Under VOS, applications appear as objects in 3-D space. Users can (graphically connect selected objects to enable communication between the respective applications. VOS includes a general concept of visual and object oriented programming for tasks ranging from, e.g., low-level programming up to high-level application configuration. In order to enable practical operation in an office or at home for many hours, the system should be very comfortable to use. Since typical 3-D equipment used, e.g., in virtual-reality applications (head-mounted displays, data gloves) is rather cumbersome and straining, we suggest to use off-head displays and contact-free interaction techniques. In this article, we introduce an autostereoscopic 3-D display and connected video based interaction techniques which allow viewpoint-depending imaging (by head tracking) and visually controlled modification of data objects and links (by gaze tracking, e.g., to pick, 3-D objects just by looking at them).

Publications desktop survival guide

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-06-01

Purpose of this guide is to document and simplify the writing, reviewing, and production process for the Uranium Mill Tailings Remedial Action (UMTRA) Project Technical Assistance Contractor (TAC) staff and to provide specific answers concerning the content, style, and format of UMTRA Project documents. Goal of the UMTRA Project document preparation process is to deliver to the US DOE high-quality documents that meet requirements (meets expressed client needs; accurate and consistent technical content; clear writing; well organized document; consistent style). A document review process has been established to ensure that TAC documents are accurate, consistent, and well organized. The editing process applies standard rules for style and format, spelling, grammar, punctuation, and sentence structure to make the document consistent and easier to read. This guide sets forth the rules to be applied to UMTRA Project documents.

Analysis of helium-ion scattering with a desktop computer

Science.gov (United States)

Butler, J. W.

1986-04-01

This paper describes a program written in an enhanced BASIC language for a desktop computer, for simulating the energy spectra of high-energy helium ions scattered into two concurrent detectors (backward and glancing). The program is designed for 512-channel spectra from samples containing up to 8 elements and 55 user-defined layers. The program is intended to meet the needs of analyses in materials sciences, such as metallurgy, where more than a few elements may be present, where several elements may be near each other in the periodic table, and where relatively deep structure may be important. These conditions preclude the use of completely automatic procedures for obtaining the sample composition directly from the scattered ion spectrum. Therefore, efficient methods are needed for entering and editing large amounts of composition data, with many iterations and with much feedback of information from the computer to the user. The internal video screen is used exclusively for verbal and numeric communications between user and computer. The composition matrix is edited on screen with a two-dimension forms-fill-in text editor and with many automatic procedures, such as doubling the number of layers with appropriate interpolations and extrapolations. The control center of the program is a bank of 10 keys that initiate on-event branching of program flow. The experimental and calculated spectra, including those of individual elements if desired, are displayed on an external color monitor, with an optional inset plot of the depth concentration profiles of the elements in the sample.

Monte Carlo simulation of electrothermal atomization on a desktop personal computer

Science.gov (United States)

Histen, Timothy E.; Güell, Oscar A.; Chavez, Iris A.; Holcombea, James A.

1996-07-01

Monte Carlo simulations have been applied to electrothermal atomization (ETA) using a tubular atomizer (e.g. graphite furnace) because of the complexity in the geometry, heating, molecular interactions, etc. The intense computational time needed to accurately model ETA often limited its effective implementation to the use of supercomputers. However, with the advent of more powerful desktop processors, this is no longer the case. A C-based program has been developed and can be used under Windows TM or DOS. With this program, basic parameters such as furnace dimensions, sample placement, furnace heating and kinetic parameters such as activation energies for desorption and adsorption can be varied to show the absorbance profile dependence on these parameters. Even data such as time-dependent spatial distribution of analyte inside the furnace can be collected. The DOS version also permits input of external temperaturetime data to permit comparison of simulated profiles with experimentally obtained absorbance data. The run-time versions are provided along with the source code. This article is an electronic publication in Spectrochimica Acta Electronica (SAE), the electronic section of Spectrochimica Acta Part B (SAB). The hardcopy text is accompanied by a diskette with a program (PC format), data files and text files.

Neurocognitive sparing of desktop microbeam irradiation.

Science.gov (United States)

Bazyar, Soha; Inscoe, Christina R; Benefield, Thad; Zhang, Lei; Lu, Jianping; Zhou, Otto; Lee, Yueh Z

2017-08-11

Normal tissue toxicity is the dose-limiting side effect of radiotherapy. Spatial fractionation irradiation techniques, like microbeam radiotherapy (MRT), have shown promising results in sparing the normal brain tissue. Most MRT studies have been conducted at synchrotron facilities. With the aim to make this promising treatment more available, we have built the first desktop image-guided MRT device based on carbon nanotube x-ray technology. In the current study, our purpose was to evaluate the effects of MRT on the rodent normal brain tissue using our device and compare it with the effect of the integrated equivalent homogenous dose. Twenty-four, 8-week-old male C57BL/6 J mice were randomly assigned to three groups: MRT, broad-beam (BB) and sham. The hippocampal region was irradiated with two parallel microbeams in the MRT group (beam width = 300 μm, center-to-center = 900 μm, 160 kVp). The BB group received the equivalent integral dose in the same area of their brain. Rotarod, marble burying and open-field activity tests were done pre- and every month post-irradiation up until 8 months to evaluate the cognitive changes and potential irradiation side effects on normal brain tissue. The open-field activity test was substituted by Barnes maze test at 8th month. A multilevel model, random coefficients approach was used to evaluate the longitudinal and temporal differences among treatment groups. We found significant differences between BB group as compared to the microbeam-treated and sham mice in the number of buried marble and duration of the locomotion around the open-field arena than shams. Barnes maze revealed that BB mice had a lower capacity for spatial learning than MRT and shams. Mice in the BB group tend to gain weight at the slower pace than shams. No meaningful differences were found between MRT and sham up until 8-month follow-up using our measurements. Applying MRT with our newly developed prototype compact CNT-based image-guided MRT system

Expanding services in a shrinking economy: desktop document delivery in a dental school library.

Science.gov (United States)

Gushrowski, Barbara A

2011-07-01

How can library staff develop and promote a document delivery service and then expand the service to a wide audience? The setting is the library at the Indiana University School of Dentistry (IUSD), Indianapolis. A faculty survey and a citation analysis were conducted to determine potential use of the service. Volume of interlibrary loan transactions and staff and equipment capacity were also studied. IUSD Library staff created a desktop delivery service (DDSXpress) for faculty and then expanded the service to practicing dental professionals and graduate students. The number of faculty using DDSXpress remains consistent. The number of practicing dental professionals using the service is low. Graduate students have been quick to adopt the service. Through careful analysis of capacity and need for the service, staff successfully expanded document delivery service without incurring additional costs. Use of DDSXpress is continually monitored, and opportunities to market the service to practicing dental professionals are being investigated.

Metadata Wizard: an easy-to-use tool for creating FGDC-CSDGM metadata for geospatial datasets in ESRI ArcGIS Desktop

Science.gov (United States)

Ignizio, Drew A.; O'Donnell, Michael S.; Talbert, Colin B.

2014-01-01

Creating compliant metadata for scientific data products is mandated for all federal Geographic Information Systems professionals and is a best practice for members of the geospatial data community. However, the complexity of the The Federal Geographic Data Committee’s Content Standards for Digital Geospatial Metadata, the limited availability of easy-to-use tools, and recent changes in the ESRI software environment continue to make metadata creation a challenge. Staff at the U.S. Geological Survey Fort Collins Science Center have developed a Python toolbox for ESRI ArcDesktop to facilitate a semi-automated workflow to create and update metadata records in ESRI’s 10.x software. The U.S. Geological Survey Metadata Wizard tool automatically populates several metadata elements: the spatial reference, spatial extent, geospatial presentation format, vector feature count or raster column/row count, native system/processing environment, and the metadata creation date. Once the software auto-populates these elements, users can easily add attribute definitions and other relevant information in a simple Graphical User Interface. The tool, which offers a simple design free of esoteric metadata language, has the potential to save many government and non-government organizations a significant amount of time and costs by facilitating the development of The Federal Geographic Data Committee’s Content Standards for Digital Geospatial Metadata compliant metadata for ESRI software users. A working version of the tool is now available for ESRI ArcDesktop, version 10.0, 10.1, and 10.2 (downloadable at http:/www.sciencebase.gov/metadatawizard).

VRLane: a desktop virtual safety management program for underground coal mine

Science.gov (United States)

Li, Mei; Chen, Jingzhu; Xiong, Wei; Zhang, Pengpeng; Wu, Daozheng

2008-10-01

VR technologies, which generate immersive, interactive, and three-dimensional (3D) environments, are seldom applied to coal mine safety work management. In this paper, a new method that combined the VR technologies with underground mine safety management system was explored. A desktop virtual safety management program for underground coal mine, called VRLane, was developed. The paper mainly concerned about the current research advance in VR, system design, key techniques and system application. Two important techniques were introduced in the paper. Firstly, an algorithm was designed and implemented, with which the 3D laneway models and equipment models can be built on the basis of the latest mine 2D drawings automatically, whereas common VR programs established 3D environment by using 3DS Max or the other 3D modeling software packages with which laneway models were built manually and laboriously. Secondly, VRLane realized system integration with underground industrial automation. VRLane not only described a realistic 3D laneway environment, but also described the status of the coal mining, with functions of displaying the run states and related parameters of equipment, per-alarming the abnormal mining events, and animating mine cars, mine workers, or long-wall shearers. The system, with advantages of cheap, dynamic, easy to maintenance, provided a useful tool for safety production management in coal mine.

Low Cost Desktop Image Analysis Workstation With Enhanced Interactive User Interface

Science.gov (United States)

Ratib, Osman M.; Huang, H. K.

1989-05-01

A multimodality picture archiving and communication system (PACS) is in routine clinical use in the UCLA Radiology Department. Several types workstations are currently implemented for this PACS. Among them, the Apple Macintosh II personal computer was recently chosen to serve as a desktop workstation for display and analysis of radiological images. This personal computer was selected mainly because of its extremely friendly user-interface, its popularity among the academic and medical community and its low cost. In comparison to other microcomputer-based systems the Macintosh II offers the following advantages: the extreme standardization of its user interface, file system and networking, and the availability of a very large variety of commercial software packages. In the current configuration the Macintosh II operates as a stand-alone workstation where images are imported from a centralized PACS server through an Ethernet network using a standard TCP-IP protocol, and stored locally on magnetic disk. The use of high resolution screens (1024x768 pixels x 8bits) offer sufficient performance for image display and analysis. We focused our project on the design and implementation of a variety of image analysis algorithms ranging from automated structure and edge detection to sophisticated dynamic analysis of sequential images. Specific analysis programs were developed for ultrasound images, digitized angiograms, MRI and CT tomographic images and scintigraphic images.

Accuracy and efficiency of full-arch digitalization and 3D printing: A comparison between desktop model scanners, an intraoral scanner, a CBCT model scan, and stereolithographic 3D printing.

Science.gov (United States)

Wesemann, Christian; Muallah, Jonas; Mah, James; Bumann, Axel

2017-01-01

The primary objective of this study was to compare the accuracy and time efficiency of an indirect and direct digitalization workflow with that of a three-dimensional (3D) printer in order to identify the most suitable method for orthodontic use. A master model was measured with a coordinate measuring instrument. The distances measured were the intercanine width, the intermolar width, and the dental arch length. Sixty-four scans were taken with each of the desktop scanners R900 and R700 (3Shape), the intraoral scanner TRIOS Color Pod (3Shape), and the Promax 3D Mid cone beam computed tomography (CBCT) unit (Planmeca). All scans were measured with measuring software. One scan was selected and printed 37 times on the D35 stereolithographic 3D printer (Innovation MediTech). The printed models were measured again using the coordinate measuring instrument. The most accurate results were obtained by the R900. The R700 and the TRIOS intraoral scanner showed comparable results. CBCT-3D-rendering with the Promax 3D Mid CBCT unit revealed significantly higher accuracy with regard to dental casts than dental impressions. 3D printing offered a significantly higher level of deviation than digitalization with desktop scanners or an intraoral scanner. The chairside time required for digital impressions was 27% longer than for conventional impressions. Conventional impressions, model casting, and optional digitization with desktop scanners remains the recommended workflow process. For orthodontic demands, intraoral scanners are a useful alternative for full-arch scans. For prosthodontic use, the scanning scope should be less than one quadrant and three additional teeth.

Technology assisted training in the nuclear regulatory environment

Energy Technology Data Exchange (ETDEWEB)

Martin, D J [Atomic Energy Control Board, Ottawa, ON (Canada)

1993-11-01

The mechanics of presenting material can impede or enhance the flow and clarity of information presented during a course. This paper describes briefly how the Training Centre of the Atomic Energy Control Board enhances the effectiveness of courses by using appropriate technology: desktop publishing, video, and computer-based interactive modules. 4 figs.

Deposition of PEDOT: PSS Nanoparticles as a Conductive Microlayer Anode in OLEDs Device by Desktop Inkjet Printer

Directory of Open Access Journals (Sweden)

S. Ummartyotin

2011-01-01

Full Text Available A simple microfabrication technique for delivering macromolecules and patterning microelectrode arrays using desktop inkjet printer was described. Aqueous solution of nanoparticle of poly (3,4-ethylenedioxythiophene (PEDOT doped with polystyrene sulfonic acid (PSS was prepared while its particle size, the surface tension, and the viscosity of the solution were adjusted to be suitable for deposition on a flexible cellulose nanocomposite substrate via inkjet printer. The statistical average of PEDOT: PSS particle size of 100 nm was observed. The microthickness, surface morphology, and electrical conductivity of the printed substrate were then characterized by profilometer, atomic force microscope (AFM, and four-point probe electrical measurement, respectively. The inkjet deposition of PEDOT: PSS was successfully carried out, whilst retained its transparency feature. Highly smooth surface (roughness ~23–44 nm was achieved.

LINAG phase I. A technical report, Version: 1.3

International Nuclear Information System (INIS)

Mittig, Wolfgang

2002-01-01

In a first report the possibility of a high intensity accelerator at GANIL, producing secondary beams of unprecedented intensity, was considered. As was outlined in that report, LINAG I, a low energy high intensity linear accelerator constituting a first phase of this more general project, could produce secondary beams either from fission products, or from fusion-evaporation or deep inelastic reactions. The Scientific Council and Directors of GANIL recommended a more detailed technical study of LINAG I as a possible option for the SPIRAL II project, to be compared to the photofission option. This is the objective of the present report. In this project, fission induced by light particles (e, p, d, etc...) is proposed to produce the radioactive ions, with an aim of 10 13 fissions/s at least, with and without a converter (an intermediate target for producing high fluxes of neutrons). The technical aspects of the LINAG I projects are studied. The LINAG I project could be considered as being part of a multi-beam policy of GANIL. It is shown that many possibilities of simultaneous use of beams would be considered. Possible synergies with EURISOL are underlined; LINAG could very well be a first phase of EURISOL and could easily provide a ready-made post-accelerator for this European project. It would also provide useful experience in operating an accelerator with up to 5 μA beams, and with beams of much higher power than those presently available at SPIRAL. Radiation shielding and safe handling of radioactive components and safe disposal of radioactive waste materials and by-products (such as gases) will be an extremely important factor in obtaining permission to operate a facility such as LINAG or EURISOL. Even though the EURISOL proposal is concerned with MW beam power, the experience with the 360 kW beams proposed by LINAG would be very relevant. The report has the following structure: I. Introduction; II. Production of Radioactive Ion Beams, RIB, and ISOL; II.1

Requirements Anaylsis and Prototype of a Desktop Flight Surgeon's Assistant

National Research Council Canada - National Science Library

Rouse, Douglas

2000-01-01

.... These areas include public health, preventive medicine, occupational medicine, aerospace medicine, travel medicine, emergency medicine, readiness planning, and a range of administrative competencies...

In Vivo Tooth-Supported Implant Surgical Guides Fabricated With Desktop Stereolithographic Printers: Fully Guided Surgery Is More Accurate Than Partially Guided Surgery.

Science.gov (United States)

Bencharit, Sompop; Staffen, Adam; Yeung, Matthew; Whitley, Daniel; Laskin, Daniel M; Deeb, George R

2018-02-21

Desktop stereolithographic printers combined with intraoral scanning and implant planning software promise precise and cost-effective guided implant surgery. The purpose of the present study was to determine the overall range of accuracy of tooth-supported guided implant surgery using desktop printed stereolithographic guides. A cross-sectional study comparing fully and partially guided implant surgery was conducted. Preoperative cone beam computed tomography (CBCT) and intraoral scans were used to plan the implant sites. Surgical guides were then fabricated using a desktop stereolithographic 3-dimensional printer. Postoperative CBCT was used to evaluate the accuracy of placement. Deviations from the planned positions were used as the primary outcome variables. The planning software used, implant systems, and anterior/posterior positions were the secondary outcome variables. The differences between the planned and actual implant positions in the mesial, distal, buccal, and lingual dimensions and buccolingual angulations were determined, and the accuracy was compared statistically using the 1-tail F-test (P = .01), box plots, and 95% confidence intervals for the mean. Sixteen partially edentulous patients requiring placement of 31 implants were included in the present study. The implant deviations from the planned positions for mesial, distal, buccal, and lingual dimensions and buccolingual angulations with the fully guided protocol (n = 20) were 0.17 ± 0.78 mm, 0.44 ± 0.78 mm, 0.23 ± 1.08 mm, -0.22 ± 1.44 mm, and -0.32° ± 2.36°, respectively. The corresponding implant deviations for the partially guided protocol (n = 11) were 0.33 ± 1.38 mm, -0.03 ± 1.59 mm, 0.62 ± 1.15 mm, -0.27 ± 1.61 mm, and 0.59° ± 6.83°. The difference between the variances for fully and partially guided surgery for the distal and angulation dimensions was statistically significant (P = .006 and P guided implant surgery is more accurate than

Deep Unsupervised Learning on a Desktop PC: A Primer for Cognitive Scientists.

Science.gov (United States)

Testolin, Alberto; Stoianov, Ivilin; De Filippo De Grazia, Michele; Zorzi, Marco

2013-01-01

Deep belief networks hold great promise for the simulation of human cognition because they show how structured and abstract representations may emerge from probabilistic unsupervised learning. These networks build a hierarchy of progressively more complex distributed representations of the sensory data by fitting a hierarchical generative model. However, learning in deep networks typically requires big datasets and it can involve millions of connection weights, which implies that simulations on standard computers are unfeasible. Developing realistic, medium-to-large-scale learning models of cognition would therefore seem to require expertise in programing parallel-computing hardware, and this might explain why the use of this promising approach is still largely confined to the machine learning community. Here we show how simulations of deep unsupervised learning can be easily performed on a desktop PC by exploiting the processors of low cost graphic cards (graphic processor units) without any specific programing effort, thanks to the use of high-level programming routines (available in MATLAB or Python). We also show that even an entry-level graphic card can outperform a small high-performance computing cluster in terms of learning time and with no loss of learning quality. We therefore conclude that graphic card implementations pave the way for a widespread use of deep learning among cognitive scientists for modeling cognition and behavior.

Deep unsupervised learning on a desktop PC: A primer for cognitive scientists

Directory of Open Access Journals (Sweden)

Alberto eTestolin

2013-05-01

Full Text Available Deep belief networks hold great promise for the simulation of human cognition because they show how structured and abstract representations may emerge from probabilistic unsupervised learning. These networks build a hierarchy of progressively more complex distributed representations of the sensory data by fitting a hierarchical generative model. However, learning in deep networks typically requires big datasets and it can involve millions of connection weights, which implies that simulations on standard computers are unfeasible. Developing realistic, medium-to-large-scale learning models of cognition would therefore seem to require expertise in programming parallel-computing hardware, and this might explain why the use of this promising approach is still largely confined to the machine learning community. Here we show how simulations of deep unsupervised learning can be easily performed on a desktop PC by exploiting the processors of low-cost graphic cards (GPUs without any specific programming effort, thanks to the use of high-level programming routines (available in MATLAB or Python. We also show that even an entry-level graphic card can outperform a small high-performance computing cluster in terms of learning time and with no loss of learning quality. We therefore conclude that graphic card implementations pave the way for a widespread use of deep learning among cognitive scientists for modeling cognition and behavior.

Deep Unsupervised Learning on a Desktop PC: A Primer for Cognitive Scientists

Science.gov (United States)

Testolin, Alberto; Stoianov, Ivilin; De Filippo De Grazia, Michele; Zorzi, Marco

2013-01-01

Deep belief networks hold great promise for the simulation of human cognition because they show how structured and abstract representations may emerge from probabilistic unsupervised learning. These networks build a hierarchy of progressively more complex distributed representations of the sensory data by fitting a hierarchical generative model. However, learning in deep networks typically requires big datasets and it can involve millions of connection weights, which implies that simulations on standard computers are unfeasible. Developing realistic, medium-to-large-scale learning models of cognition would therefore seem to require expertise in programing parallel-computing hardware, and this might explain why the use of this promising approach is still largely confined to the machine learning community. Here we show how simulations of deep unsupervised learning can be easily performed on a desktop PC by exploiting the processors of low cost graphic cards (graphic processor units) without any specific programing effort, thanks to the use of high-level programming routines (available in MATLAB or Python). We also show that even an entry-level graphic card can outperform a small high-performance computing cluster in terms of learning time and with no loss of learning quality. We therefore conclude that graphic card implementations pave the way for a widespread use of deep learning among cognitive scientists for modeling cognition and behavior. PMID:23653617

Using the rear projection of the Socibot Desktop robot for creation of applications with facial expressions

Science.gov (United States)

Gîlcă, G.; Bîzdoacă, N. G.; Diaconu, I.

2016-08-01

This article aims to implement some practical applications using the Socibot Desktop social robot. We mean to realize three applications: creating a speech sequence using the Kiosk menu of the browser interface, creating a program in the Virtual Robot browser interface and making a new guise to be loaded into the robot's memory in order to be projected onto it face. The first application is actually created in the Compose submenu that contains 5 file categories: audio, eyes, face, head, mood, this being helpful in the creation of the projected sequence. The second application is more complex, the completed program containing: audio files, speeches (can be created in over 20 languages), head movements, the robot's facial parameters function of each action units (AUs) of the facial muscles, its expressions and its line of sight. Last application aims to change the robot's appearance with the guise created by us. The guise was created in Adobe Photoshop and then loaded into the robot's memory.

Differences in typing forces, muscle activity, comfort, and typing performance among virtual, notebook, and desktop keyboards.

Science.gov (United States)

Kim, Jeong Ho; Aulck, Lovenoor; Bartha, Michael C; Harper, Christy A; Johnson, Peter W

2014-11-01

The present study investigated whether there were physical exposure and typing productivity differences between a virtual keyboard with no tactile feedback and two conventional keyboards where key travel and tactile feedback are provided by mechanical switches under the keys. The key size and layout were same across all the keyboards. Typing forces; finger and shoulder muscle activity; self-reported comfort; and typing productivity were measured from 19 subjects while typing on a virtual (0 mm key travel), notebook (1.8 mm key travel), and desktop keyboard (4 mm key travel). When typing on the virtual keyboard, subjects typed with less force (p's typing forces and finger muscle activity came at the expense of a 60% reduction in typing productivity (p typing sessions or when typing productivity is at a premium, conventional keyboards with tactile feedback may be more suitable interface. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Thermoelectric cooling of microelectronic circuits and waste heat electrical power generation in a desktop personal computer

International Nuclear Information System (INIS)

Gould, C.A.; Shammas, N.Y.A.; Grainger, S.; Taylor, I.

2011-01-01

Thermoelectric cooling and micro-power generation from waste heat within a standard desktop computer has been demonstrated. A thermoelectric test system has been designed and constructed, with typical test results presented for thermoelectric cooling and micro-power generation when the computer is executing a number of different applications. A thermoelectric module, operating as a heat pump, can lower the operating temperature of the computer's microprocessor and graphics processor to temperatures below ambient conditions. A small amount of electrical power, typically in the micro-watt or milli-watt range, can be generated by a thermoelectric module attached to the outside of the computer's standard heat sink assembly, when a secondary heat sink is attached to the other side of the thermoelectric module. Maximum electrical power can be generated by the thermoelectric module when a water cooled heat sink is used as the secondary heat sink, as this produces the greatest temperature difference between both sides of the module.

Efficiency using computer simulation of Reverse Threshold Model Theory on assessing a “One Laptop Per Child” computer versus desktop computer

Directory of Open Access Journals (Sweden)

Supat Faarungsang

2017-04-01

Full Text Available The Reverse Threshold Model Theory (RTMT model was introduced based on limiting factor concepts, but its efficiency compared to the Conventional Model (CM has not been published. This investigation assessed the efficiency of RTMT compared to CM using computer simulation on the “One Laptop Per Child” computer and a desktop computer. Based on probability values, it was found that RTMT was more efficient than CM among eight treatment combinations and an earlier study verified that RTMT gives complete elimination of random error. Furthermore, RTMT has several advantages over CM and is therefore proposed to be applied to most research data.

75 FR 20385 - Amended Certification Regarding Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2010-04-19

... Carolina. The notice will be published soon in the Federal Register. At the request of the State Agency... production of desktop computers. The company reports that workers leased from Staffing Solutions, South East...

Negotiating climate change agreements - the view from the mineral wool sector

International Nuclear Information System (INIS)

Loudon, Robert

2001-01-01

Trade associations representing energy-intensive industrial sectors in the UK have negotiated agreements with the Department of the Environment, Transport and the Regions (DETR) to enable their members to receive an 80% rebate on the climate change levy (CCL) providing they meet agreed energy saving targets. Insulation manufacturing is represented by Eurisol and the Mineral Wool Energy Savings Company (MINESCO). Rock wool and glass wool manufacture uses energy for blending, melting, fiberising, curing, cooling, cutting and packaging. However the mineral wool sector has already made significant improvements in energy efficiency over the last 20 years. Confidentiality issues led to Eurisol appointing consultants to advise on how individual plants could achieve further energy savings. Cadogan Consultants developed a strategy that incorporated both qualitative and quantitative issues and allowed the energy saving potential at each site to be identified. MINESCO agreed energy saving targets with the DETR in December 2000, but much work remains to be done

Life cycle assessment study of a Chinese desktop personal computer.

Science.gov (United States)

Duan, Huabo; Eugster, Martin; Hischier, Roland; Streicher-Porte, Martin; Li, Jinhui

2009-02-15

Associated with the tremendous prosperity in world electronic information and telecommunication industry, there continues to be an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of electronic and electric products (e-products). China's importance as both a consumer and supplier of e-products has grown at an unprecedented pace in recent decade. Hence, this paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese e-products from a global level. A desktop personal computer system has been selected to carry out a detailed and modular LCA which follows the ISO 14040 series. The LCA is constructed by SimaPro software version 7.0 and expressed with the Eco-indicator'99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the so-called CML method is used in order to estimate the influence of the choice of the assessment method on the result. Life cycle inventory information is complied by ecoinvent 1.3 databases, combined with literature and field investigations on the present Chinese situation. The established LCA study shows that that the manufacturing and the use of such devices are of the highest environmental importance. In the manufacturing of such devices, the integrated circuits (ICs) and the Liquid Crystal Display (LCD) are those parts contributing most to the impact. As no other aspects are taken into account during the use phase, the impact is due to the way how the electricity is produced. The final process steps--i.e. the end of life phase--lead to a clear environmental benefit if a formal and modern, up-to-date technical system is assumed, like here in this study.

Life cycle assessment study of a Chinese desktop personal computer

International Nuclear Information System (INIS)

Duan Huabo; Eugster, Martin; Hischier, Roland; Streicher-Porte, Martin; Li Jinhui

2009-01-01

Associated with the tremendous prosperity in world electronic information and telecommunication industry, there continues to be an increasing awareness of the environmental impacts related to the accelerating mass production, electricity use, and waste management of electronic and electric products (e-products). China's importance as both a consumer and supplier of e-products has grown at an unprecedented pace in recent decade. Hence, this paper aims to describe the application of life cycle assessment (LCA) to investigate the environmental performance of Chinese e-products from a global level. A desktop personal computer system has been selected to carry out a detailed and modular LCA which follows the ISO 14040 series. The LCA is constructed by SimaPro software version 7.0 and expressed with the Eco-indicator'99 life cycle impact assessment method. For a sensitivity analysis of the overall LCA results, the so-called CML method is used in order to estimate the influence of the choice of the assessment method on the result. Life cycle inventory information is complied by ecoinvent 1.3 databases, combined with literature and field investigations on the present Chinese situation. The established LCA study shows that that the manufacturing and the use of such devices are of the highest environmental importance. In the manufacturing of such devices, the integrated circuits (ICs) and the Liquid Crystal Display (LCD) are those parts contributing most to the impact. As no other aspects are taken into account during the use phase, the impact is due to the way how the electricity is produced. The final process steps - i.e. the end of life phase - lead to a clear environmental benefit if a formal and modern, up-to-date technical system is assumed, like here in this study

GPS positioning and desktop mapping. Applications to environmental monitoring. Report on task JNT B898 on the Finnish support programme to IAEA safeguards

International Nuclear Information System (INIS)

Kansanaho, A.; Ilander, T.; Toivonen, H.

1995-10-01

Satellite navigation has been used for in-field applications by the Finnish Centre for Radiation and Nuclear Safety since 1993. Because of this experience, training in the use of GPS positioning and desktop mapping was chosen as a task under the Finnish Support programme to IAEA safeguards. A lecture and a field experiment was held in the training course on environmental monitoring at the IAEA headquarters in June 1995. Real-time mapping of the co-ordinates and storing information on sampling sites and procedures can make safeguards implementation more efficient and effective. Further software development are needed for these purposes. (author) (6 figs.)

Lowering the Barriers to Using Data: Enabling Desktop-based HPD Science through Virtual Environments and Web Data Services

Science.gov (United States)

Druken, K. A.; Trenham, C. E.; Steer, A.; Evans, B. J. K.; Richards, C. J.; Smillie, J.; Allen, C.; Pringle, S.; Wang, J.; Wyborn, L. A.

2016-12-01

The Australian National Computational Infrastructure (NCI) provides access to petascale data in climate, weather, Earth observations, and genomics, and terascale data in astronomy, geophysics, ecology and land use, as well as social sciences. The data is centralized in a closely integrated High Performance Computing (HPC), High Performance Data (HPD) and cloud facility. Despite this, there remain significant barriers for many users to find and access the data: simply hosting a large volume of data is not helpful if researchers are unable to find, access, and use the data for their particular need. Use cases demonstrate we need to support a diverse range of users who are increasingly crossing traditional research discipline boundaries. To support their varying experience, access needs and research workflows, NCI has implemented an integrated data platform providing a range of services that enable users to interact with our data holdings. These services include: - A GeoNetwork catalog built on standardized Data Management Plans to search collection metadata, and find relevant datasets; - Web data services to download or remotely access data via OPeNDAP, WMS, WCS and other protocols; - Virtual Desktop Infrastructure (VDI) built on a highly integrated on-site cloud with access to both the HPC peak machine and research data collections. The VDI is a fully featured environment allowing visualization, code development and analysis to take place in an interactive desktop environment; and - A Learning Management System (LMS) containing User Guides, Use Case examples and Jupyter Notebooks structured into courses, so that users can self-teach how to use these facilities with examples from our system across a range of disciplines. We will briefly present these components, and discuss how we engage with data custodians and consumers to develop standardized data structures and services that support the range of needs. We will also highlight some key developments that have

Owgis 2.0: Open Source Java Application that Builds Web GIS Interfaces for Desktop Andmobile Devices

Science.gov (United States)

Zavala Romero, O.; Chassignet, E.; Zavala-Hidalgo, J.; Pandav, H.; Velissariou, P.; Meyer-Baese, A.

2016-12-01

OWGIS is an open source Java and JavaScript application that builds easily configurable Web GIS sites for desktop and mobile devices. The current version of OWGIS generates mobile interfaces based on HTML5 technology and can be used to create mobile applications. The style of the generated websites can be modified using COMPASS, a well known CSS Authoring Framework. In addition, OWGIS uses several Open Geospatial Consortium standards to request datafrom the most common map servers, such as GeoServer. It is also able to request data from ncWMS servers, allowing the websites to display 4D data from NetCDF files. This application is configured by XML files that define which layers, geographic datasets, are displayed on the Web GIS sites. Among other features, OWGIS allows for animations; streamlines from vector data; virtual globe display; vertical profiles and vertical transects; different color palettes; the ability to download data; and display text in multiple languages. OWGIS users are mainly scientists in the oceanography, meteorology and climate fields.

Energy saving in the design and operation of fans; The development of technical literature for the specification of fume extraction systems

Energy Technology Data Exchange (ETDEWEB)

Gibbons, A [Plastic Fabrications and Environmental Technology Ltd., Armagh, Northern Ireland (United Kingdom)

1995-12-01

The processes involved in producing technical literature to assist in the selection of fans are discussed. Desktop publishing has been found to provide an effective method of matching the detail of the literature to the needs of the customer. (author)

The development of technical literature for the specification of fume extraction systems

Energy Technology Data Exchange (ETDEWEB)

Gibbons, A [Plastic Fabrications and Environmental Technology Ltd., Armagh (United Kingdom)

1996-12-31

The processes involved in producing technical literature to assist in the selection of fans are discussed. Desktop publishing has been found to provide an effective method of matching the detail of the literature to the needs of the customer. (author)

Design and construction of a desktop AC susceptometer using an Arduino and a Bluetooth for serial interface

Science.gov (United States)

Pérez, Israel; Ángel Hernández Cuevas, José; Trinidad Elizalde Galindo, José

2018-05-01

We designed and developed a desktop AC susceptometer for the characterization of materials. The system consists of a lock-in amplifier, an AC function generator, a couple of coils, a sample holder, a computer system with a designed software in freeware C++ code, and an Arduino card coupled to a Bluetooth module. The Arduino/Bluetooth serial interface allows the user to have a connection to almost any computer and thus avoids the problem of connectivity between the computer and the peripherals, such as the lock-in amplifier and the function generator. The Bluetooth transmitter/receiver used is a commercial device which is robust and fast. These new features reduce the size and increase the versatility of the susceptometer, for it can be used with a simple laptop. To test our instrument, we performed measurements on magnetic materials and show that the system is reliable at both room temperature and cryogenic temperatures (77 K). The instrument is suitable for any physics or engineering laboratory either for research or academic purposes.

Development and deployment of a Desktop and Mobile application on grid for GPS studie

Science.gov (United States)

Ntumba, Patient; Lotoy, Vianney; Djungu, Saint Jean; Fleury, Rolland; Petitdidier, Monique; Gemünd, André; Schwichtenberg, Horst

2013-04-01

GPS networks for scientific studies are developed all other the world and large databases, regularly updated, like IGS are also available. Many GPS have been installed in West and Central Africa during AMMA (African Monsoon Multiplidisciplinary Analysis), IHY (International heliophysical Year)and many other projects since 2005. African scientists have been educated to use those data especially for meteorological and ionospheric studies. The annual variations of ionospheric parameters for a given station or map of a given region are very intensive computing. Then grid or cloud computing may be a solution to obtain results in a relatively short time. Real time At the University of Kinshasa the chosen solution is a grid of several PCs. It has been deployed by using Globus Toolkit on a Condor pool in order to support the processing of GPS data for ionospheric studies. To be user-friendly, graphical user interfaces(GUI) have been developed to help the user to prepare and submit jobs. One is a java GUI for desktop client, the other is an Android GUI for mobile client. The interest of a grid is the possibility to send a bunch of jobs with an adequate agent control in order to survey the job execution and result storage. After the feasibility study the grid will be extended to a larger number of PCs. Other solutions will be in parallel explored.

Desktop-Stereolithography 3D-Printing of a Poly(dimethylsiloxane)-Based Material with Sylgard-184 Properties.

Science.gov (United States)

Bhattacharjee, Nirveek; Parra-Cabrera, Cesar; Kim, Yong Tae; Kuo, Alexandra P; Folch, Albert

2018-05-01

The advantageous physiochemical properties of poly(dimethylsiloxane) (PDMS) have made it an extremely useful material for prototyping in various technological, scientific, and clinical areas. However, PDMS molding is a manual procedure and requires tedious assembly steps, especially for 3D designs, thereby limiting its access and usability. On the other hand, automated digital manufacturing processes such as stereolithography (SL) enable true 3D design and fabrication. Here the formulation, characterization, and SL application of a 3D-printable PDMS resin (3DP-PDMS) based on commercially available PDMS-methacrylate macromers, a high-efficiency photoinitiator and a high-absorbance photosensitizer, is reported. Using a desktop SL-printer, optically transparent submillimeter structures and microfluidic channels are demonstrated. An optimized blend of PDMS-methacrylate macromers is also used to SL-print structures with mechanical properties similar to conventional thermally cured PDMS (Sylgard-184). Furthermore, it is shown that SL-printed 3DP-PDMS substrates can be rendered suitable for mammalian cell culture. The 3DP-PDMS resin enables assembly-free, automated, digital manufacturing of PDMS, which should facilitate the prototyping of devices for microfluidics, organ-on-chip platforms, soft robotics, flexible electronics, and sensors, among others. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A web-based remote radiation treatment planning system using the remote desktop function of a computer operating system: a preliminary report.

Science.gov (United States)

Suzuki, Keishiro; Hirasawa, Yukinori; Yaegashi, Yuji; Miyamoto, Hideki; Shirato, Hiroki

2009-01-01

We developed a web-based, remote radiation treatment planning system which allowed staff at an affiliated hospital to obtain support from a fully staffed central institution. Network security was based on a firewall and a virtual private network (VPN). Client computers were installed at a cancer centre, at a university hospital and at a staff home. We remotely operated the treatment planning computer using the Remote Desktop function built in to the Windows operating system. Except for the initial setup of the VPN router, no special knowledge was needed to operate the remote radiation treatment planning system. There was a time lag that seemed to depend on the volume of data traffic on the Internet, but it did not affect smooth operation. The initial cost and running cost of the system were reasonable.

Using GIS and digital aerial photography to assist in the conviction of a serial killer

CSIR Research Space (South Africa)

Schmitz, Peter MU

2000-12-01

Full Text Available A desktop geographical information system (GIS) was used to pin-map the 86 cases associated with the Wemmerpan serial killer, representing crimes committed between 17 September 1995 and 19 December 1997 in central, western and southern Johannesburg...

Improvement of maintenance engineering using plant network and personal digital assistant

International Nuclear Information System (INIS)

Otani, Yohei; Hasegawa, Takeshi; Hoshino, Masateru; Kato, Takahisa; Yokoi, Miki

2015-01-01

Toshiba has developed and adopted wired and/or wireless maintenance network at nuclear power plant in cooperate with industry. Toshiba also developed a tablet PC based field testing tool that enables to display test procedures and record test results in the field to improve the efficiency of such testing. Recently, we have adopted remote desktop protocol that enables to support the operator. (author)

Consolidating Financial Statements.

Science.gov (United States)

Wood, Marcia R.

This publication is designed to be a desktop reference and assist financial officers in both public and independent institutions of higher education in the preparation of consolidated financial statements. Chapter 1 covers generally accepted accounting principles and other accounting literature, and summarizes reporting rules of the Financial…

An interactive physics-based unmanned ground vehicle simulator leveraging open source gaming technology: progress in the development and application of the virtual autonomous navigation environment (VANE) desktop

Science.gov (United States)

Rohde, Mitchell M.; Crawford, Justin; Toschlog, Matthew; Iagnemma, Karl D.; Kewlani, Guarav; Cummins, Christopher L.; Jones, Randolph A.; Horner, David A.

2009-05-01

It is widely recognized that simulation is pivotal to vehicle development, whether manned or unmanned. There are few dedicated choices, however, for those wishing to perform realistic, end-to-end simulations of unmanned ground vehicles (UGVs). The Virtual Autonomous Navigation Environment (VANE), under development by US Army Engineer Research and Development Center (ERDC), provides such capabilities but utilizes a High Performance Computing (HPC) Computational Testbed (CTB) and is not intended for on-line, real-time performance. A product of the VANE HPC research is a real-time desktop simulation application under development by the authors that provides a portal into the HPC environment as well as interaction with wider-scope semi-automated force simulations (e.g. OneSAF). This VANE desktop application, dubbed the Autonomous Navigation Virtual Environment Laboratory (ANVEL), enables analysis and testing of autonomous vehicle dynamics and terrain/obstacle interaction in real-time with the capability to interact within the HPC constructive geo-environmental CTB for high fidelity sensor evaluations. ANVEL leverages rigorous physics-based vehicle and vehicle-terrain interaction models in conjunction with high-quality, multimedia visualization techniques to form an intuitive, accurate engineering tool. The system provides an adaptable and customizable simulation platform that allows developers a controlled, repeatable testbed for advanced simulations. ANVEL leverages several key technologies not common to traditional engineering simulators, including techniques from the commercial video-game industry. These enable ANVEL to run on inexpensive commercial, off-the-shelf (COTS) hardware. In this paper, the authors describe key aspects of ANVEL and its development, as well as several initial applications of the system.

Unique Methodologies for Nano/Micro Manufacturing Job Training Via Desktop Supercomputer Modeling and Simulation

Energy Technology Data Exchange (ETDEWEB)

Kimball, Clyde [Northern Illinois Univ., DeKalb, IL (United States); Karonis, Nicholas [Northern Illinois Univ., DeKalb, IL (United States); Lurio, Laurence [Northern Illinois Univ., DeKalb, IL (United States); Piot, Philippe [Northern Illinois Univ., DeKalb, IL (United States); Xiao, Zhili [Northern Illinois Univ., DeKalb, IL (United States); Glatz, Andreas [Northern Illinois Univ., DeKalb, IL (United States); Pohlman, Nicholas [Northern Illinois Univ., DeKalb, IL (United States); Hou, Minmei [Northern Illinois Univ., DeKalb, IL (United States); Demir, Veysel [Northern Illinois Univ., DeKalb, IL (United States); Song, Jie [Northern Illinois Univ., DeKalb, IL (United States); Duffin, Kirk [Northern Illinois Univ., DeKalb, IL (United States); Johns, Mitrick [Northern Illinois Univ., DeKalb, IL (United States); Sims, Thomas [Northern Illinois Univ., DeKalb, IL (United States); Yin, Yanbin [Northern Illinois Univ., DeKalb, IL (United States)

2012-11-21

This project establishes an initiative in high speed (Teraflop)/large-memory desktop supercomputing for modeling and simulation of dynamic processes important for energy and industrial applications. It provides a training ground for employment of current students in an emerging field with skills necessary to access the large supercomputing systems now present at DOE laboratories. It also provides a foundation for NIU faculty to quantum leap beyond their current small cluster facilities. The funding extends faculty and student capability to a new level of analytic skills with concomitant publication avenues. The components of the Hewlett Packard computer obtained by the DOE funds create a hybrid combination of a Graphics Processing System (12 GPU/Teraflops) and a Beowulf CPU system (144 CPU), the first expandable via the NIU GAEA system to ~60 Teraflops integrated with a 720 CPU Beowulf system. The software is based on access to the NVIDIA/CUDA library and the ability through MATLAB multiple licenses to create additional local programs. A number of existing programs are being transferred to the CPU Beowulf Cluster. Since the expertise necessary to create the parallel processing applications has recently been obtained at NIU, this effort for software development is in an early stage. The educational program has been initiated via formal tutorials and classroom curricula designed for the coming year. Specifically, the cost focus was on hardware acquisitions and appointment of graduate students for a wide range of applications in engineering, physics and computer science.

Human-Centred Computing for Assisting Nuclear Safeguards

International Nuclear Information System (INIS)

Szoke, I.

2015-01-01

With the rapid evolution of enabling hardware and software, technologies including 3D simulation, virtual reality (VR), augmented reality (AR), advanced user interfaces (UI), and geographical information systems (GIS) are increasingly employed in many aspects of modern life. In line with this, the nuclear industry is rapidly adopting emerging technologies to improve efficiency and safety by supporting planning and optimization of maintenance and decommissioning work, as well as for knowledge management, surveillance, training and briefing field operatives, education, etc. For many years, the authors have been involved in research and development (R&D) into the application of 3D simulation, VR, and AR, for mobile, desktop, and immersive 3D systems, to provide a greater sense of presence and situation awareness, for training, briefing, and in situ work by field operators. This work has resulted in a unique software base and experience (documented in numerous reports) from evaluating the effects of the design of training programmes and briefing sessions on human performance and training efficiency when applying various emerging technologies. In addition, the authors are involved in R&D into the use of 3D simulation, advanced UIs, mobile computing, and GIS systems to support realistic visualization of the combined radiological and geographical environment, as well as acquisition, analyzes, visualization and sharing of radiological and other data, within nuclear installations and their surroundings. The toolkit developed by the authors, and the associated knowledge base, has been successfully applied to various aspects of the nuclear industry, and has great potential within the safeguards domain. It can be used to train safeguards inspectors, brief inspectors before inspections, assist inspectors in situ (data registration, analyzes, and communication), support the design and verification of safeguards systems, conserve data and experience, educate future safeguards

IMIS desktop & smartphone software solutions for monitoring spacecrafts' payload from anywhere

Science.gov (United States)

Baroukh, J.; Queyrut, O.; Airaud, J.

In the past years, the demand for satellite remote operations has increased guided by on one hand, the will to reduce operations cost (on-call operators out of business hours), and on the other hand, the development of cooperation space missions resulting in a world wide distribution of engineers and science team members. Only a few off-the-shelf solutions exist to fulfill the need of remote payload monitoring, and they mainly use proprietary devices. The recent advent of mobile technologies (laptops, smartphones and tablets) as well as the worldwide deployment of broadband networks (3G, Wi-Fi hotspots), has opened up a technical window that brings new options. As part of the Mars Science Laboratory (MSL) mission, the Centre National D'Etudes Spatiales (CNES, the French space agency) has developed a new software solution for monitoring spacecraft payloads. The Instrument Monitoring Interactive Software (IMIS) offers state-of-the-art operational features for payload monitoring, and can be accessed remotely. It was conceived as a generic tool that can be used for heterogeneous payloads and missions. IMIS was designed as a classical client/server architecture. The server is hosted at CNES and acts as a data provider while two different kinds of clients are available depending on the level of mobility required. The first one is a rich client application, built on Eclipse framework, which can be installed on usual operating systems and communicates with the server through the Internet. The second one is a smartphone application for any Android platform, connected to the server thanks to the mobile broadband network or a Wi-Fi connection. This second client is mainly devoted to on-call operations and thus only contains a subset of the IMIS functionalities. This paper describes the operational context, including security aspects, that led IMIS development, presents the selected software architecture and details the various features of both clients: the desktop and the sm

From the desktop to the grid: scalable bioinformatics via workflow conversion.

Science.gov (United States)

de la Garza, Luis; Veit, Johannes; Szolek, Andras; Röttig, Marc; Aiche, Stephan; Gesing, Sandra; Reinert, Knut; Kohlbacher, Oliver

2016-03-12

Reproducibility is one of the tenets of the scientific method. Scientific experiments often comprise complex data flows, selection of adequate parameters, and analysis and visualization of intermediate and end results. Breaking down the complexity of such experiments into the joint collaboration of small, repeatable, well defined tasks, each with well defined inputs, parameters, and outputs, offers the immediate benefit of identifying bottlenecks, pinpoint sections which could benefit from parallelization, among others. Workflows rest upon the notion of splitting complex work into the joint effort of several manageable tasks. There are several engines that give users the ability to design and execute workflows. Each engine was created to address certain problems of a specific community, therefore each one has its advantages and shortcomings. Furthermore, not all features of all workflow engines are royalty-free -an aspect that could potentially drive away members of the scientific community. We have developed a set of tools that enables the scientific community to benefit from workflow interoperability. We developed a platform-free structured representation of parameters, inputs, outputs of command-line tools in so-called Common Tool Descriptor documents. We have also overcome the shortcomings and combined the features of two royalty-free workflow engines with a substantial user community: the Konstanz Information Miner, an engine which we see as a formidable workflow editor, and the Grid and User Support Environment, a web-based framework able to interact with several high-performance computing resources. We have thus created a free and highly accessible way to design workflows on a desktop computer and execute them on high-performance computing resources. Our work will not only reduce time spent on designing scientific workflows, but also make executing workflows on remote high-performance computing resources more accessible to technically inexperienced users. We

77 FR 46122 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2012-08-02

...)(1) with respect to the affirmative determination described in paragraph (1)(A) is published in the... subparagraph (1) is published in the Federal Register; and (3) The workers have become totally or partially... Atlanta, GA June 14, 2011. Production Control Branch and ICT Desktop Support Branch. 81,729C Crawford and...

75 FR 21359 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2010-04-23

... section 202(f)(1) with respect to the affirmative determination described in paragraph (1)(A) is published... described in subparagraph (1) is published in the Federal Register; and (3) The workers have become totally... Systems Group-Desktop, Off-Site Teleworkers Reporting to this Site, Fort Collins, CO: December 9, 2008. TA...

Multi-MW target station: Beam Window Issues and Transverse Film Target

CERN Document Server

Herrera-Martinez, A

The analysis of the EURISOL-DS Multi_MW target precise geometry has proved that large fission yields can be achieved with a 4 MW, providing a technically feasible design to evacuate the power deposited in the liquid mercury. Different designs for the mercury flow have been proposed, which maintain its temperature below the boiling point with moderate flow speeds (maximum 4 m/s).

At the Turning Point of the Current Techno-Economic Paradigm: Commons-Based Peer Production, Desktop Manufacturing and the Role of Civil Society in the Perezian Framework

Directory of Open Access Journals (Sweden)

Vasilis Kostakis

2013-01-01

Full Text Available Following the theory of techno-economic paradigm shifts (TEPS, this paper calls attention to the phenomenon of Commons-based peer production (CBPP. In the context of the current paradigm, it argues that civil society can play an important role in creating favourable conditions for a more sustainable global knowledge society. Approaching tentatively the ways in which 3D printing and other desktop manufacturing technologies can be used in CBPP, it also explores the ways in which the partnership with the state may provide a supportive innovative institutional basis for taking the maximum advantage of the emerging synergies in the vein of TEPS theory.

75 FR 3928 - Notice of Determinations Regarding Eligibility To Apply for Worker Adjustment Assistance

Science.gov (United States)

2010-01-25

... section 202(f)(1) with respect to the affirmative determination described in paragraph (1)(A) is published... described in subparagraph (1) is published in the Federal Register; and (3) The workers have become totally...: September 16, 2008. TA-W-72,512; Hewlett Packard, HRGO/US--PSG Desktop & Notebook GBUs, W. Houston, TX...

Ground-based measurement of column-averaged mixing ratios of methane and carbon dioxide in the Sichuan Basin of China by a desktop optical spectrum analyzer

Science.gov (United States)

Qin, Xiu-Chun; Nakayama, Tomoki; Matsumi, Yutaka; Kawasaki, Masahiro; Ono, Akiko; Hayashida, Sachiko; Imasu, Ryoichi; Lei, Li-Ping; Murata, Isao; Kuroki, Takahiro; Ohashi, Masafumi

2018-01-01

Remote sensing of the atmospheric greenhouse gases, methane (CH4) and carbon dioxide (CO2), contributes to the understanding of global warming and climate change. A portable ground-based instrument consisting of a commercially available desktop optical spectrum analyzer and a small sun tracker has been applied to measure the column densities of atmospheric CH4 and CO2 at Yanting observation station in a mountainous paddy field of the Sichuan Basin from September to November 2013. The column-averaged dry-air molar mixing ratios, XCH4/XCO2, are compared with those retrieved by satellite observations in the Sichuan Basin and by ground-based network observations in the same latitude zone as the Yanting observation station.

International assistance. Licensing assistance project

International Nuclear Information System (INIS)

Aleev, A.

1999-01-01

Description of licensing assistance project for VATESI is presented. In licensing of unit No.1 of INPP VATESI is supported by many western countries. Experts from regulatory bodies or scientific organizations of those countries assist VATESI staff in reviewing documentation presented by INPP. Among bilateral cooperation support is provided by European Commission through Phare programme

CloVR: a virtual machine for automated and portable sequence analysis from the desktop using cloud computing.

Science.gov (United States)

Angiuoli, Samuel V; Matalka, Malcolm; Gussman, Aaron; Galens, Kevin; Vangala, Mahesh; Riley, David R; Arze, Cesar; White, James R; White, Owen; Fricke, W Florian

2011-08-30

Next-generation sequencing technologies have decentralized sequence acquisition, increasing the demand for new bioinformatics tools that are easy to use, portable across multiple platforms, and scalable for high-throughput applications. Cloud computing platforms provide on-demand access to computing infrastructure over the Internet and can be used in combination with custom built virtual machines to distribute pre-packaged with pre-configured software. We describe the Cloud Virtual Resource, CloVR, a new desktop application for push-button automated sequence analysis that can utilize cloud computing resources. CloVR is implemented as a single portable virtual machine (VM) that provides several automated analysis pipelines for microbial genomics, including 16S, whole genome and metagenome sequence analysis. The CloVR VM runs on a personal computer, utilizes local computer resources and requires minimal installation, addressing key challenges in deploying bioinformatics workflows. In addition CloVR supports use of remote cloud computing resources to improve performance for large-scale sequence processing. In a case study, we demonstrate the use of CloVR to automatically process next-generation sequencing data on multiple cloud computing platforms. The CloVR VM and associated architecture lowers the barrier of entry for utilizing complex analysis protocols on both local single- and multi-core computers and cloud systems for high throughput data processing.

Interactive desktop analysis of high resolution simulations: application to turbulent plume dynamics and current sheet formation

International Nuclear Information System (INIS)

Clyne, John; Mininni, Pablo; Norton, Alan; Rast, Mark

2007-01-01

The ever increasing processing capabilities of the supercomputers available to computational scientists today, combined with the need for higher and higher resolution computational grids, has resulted in deluges of simulation data. Yet the computational resources and tools required to make sense of these vast numerical outputs through subsequent analysis are often far from adequate, making such analysis of the data a painstaking, if not a hopeless, task. In this paper, we describe a new tool for the scientific investigation of massive computational datasets. This tool (VAPOR) employs data reduction, advanced visualization, and quantitative analysis operations to permit the interactive exploration of vast datasets using only a desktop PC equipped with a commodity graphics card. We describe VAPORs use in the study of two problems. The first, motivated by stellar envelope convection, investigates the hydrodynamic stability of compressible thermal starting plumes as they descend through a stratified layer of increasing density with depth. The second looks at current sheet formation in an incompressible helical magnetohydrodynamic flow to understand the early spontaneous development of quasi two-dimensional (2D) structures embedded within the 3D solution. Both of the problems were studied at sufficiently high spatial resolution, a grid of 504 2 by 2048 points for the first and 1536 3 points for the second, to overwhelm the interactive capabilities of typically available analysis resources

Canine assisted reading

OpenAIRE

Sever, Jerneja

2016-01-01

The diploma thesis presents various aspects of animals included in animal-assisted interventions. In theoretical part, I introduced different possible ways of animal-assisted interventions: animal-assisted therapy, animal-assisted activities and animal-assisted education. Animals became common visitors in educational settings all over the world. I presented positive influences on various aspects of human life, as well limitations when animal-assisted interventions are not possible to perform ...

Assisted Living

Science.gov (United States)

... it, too. Back to top What is the Cost for Assisted Living? Although assisted living costs less than nursing home ... Primarily, older persons or their families pay the cost of assisted living. Some health and long-term care insurance policies ...

EURISOL MERCURY TARGET EXPERIMENT: CERN SAFETY REPORT

CERN Document Server

J. Gulley (CERN SC/GS)

Report on a visit to the mercury-handling lab at IPUL. The aim was to provide recommendations to IPUL on general health and safety issues relatring to the handling of mercury, the objective being to reduce exposure to acceptable levels, so far as is reasonably practical.

From continuing education to personal digital assistants: what do physical therapists need to support evidence-based practice in stroke management?

Science.gov (United States)

Salbach, Nancy M; Veinot, Paula; Jaglal, Susan B; Bayley, Mark; Rolfe, Danielle

2011-08-01

Understanding how to structure educational interventions and resources to facilitate physical therapists' application of the research literature is required. The objective of this study was to explore physical therapists' preferences for strategies to facilitate their access to, evaluation and implementation of the stroke research literature in clinical practice. In-depth, qualitative telephone interviews were conducted with 23 physical therapists who treat people with stroke in Ontario, Canada and who had participated in a previous survey on evidence-based practice. Data were analysed using a constant comparative approach to identify emergent themes. Participants preferred online access to research summaries or systematic reviews to save time to filter and critique research articles. To enable access in the workplace, an acceptable computer-to-staff ratio, permission to access web sites and protected work time were suggested. Participants considered personal digital assistants as excellent tools for quick access to online resources but were unsure of their advantage over a desktop computer. Therapists favoured use of non-technical language, glossaries of research terms and quality ratings of studies to ease understanding and appraisal. Teleconferencing or videoconferencing overcame geographical but not scheduling barriers to accessing education. To achieve behaviour change in clinical practice, therapists preferred multiple interactive, face-to-face education sessions in a group format, with opportunities for case-based learning and practice of new skills. Physical therapists prefer technology-assisted access to resources and education and favour attending multiple interactive, expert-facilitated education sessions incorporating opportunities for case-based learning and practice of new skills to change behaviour related to evidence-based practice. © 2010 Blackwell Publishing Ltd.

CloVR: A virtual machine for automated and portable sequence analysis from the desktop using cloud computing

Science.gov (United States)

2011-01-01

Background Next-generation sequencing technologies have decentralized sequence acquisition, increasing the demand for new bioinformatics tools that are easy to use, portable across multiple platforms, and scalable for high-throughput applications. Cloud computing platforms provide on-demand access to computing infrastructure over the Internet and can be used in combination with custom built virtual machines to distribute pre-packaged with pre-configured software. Results We describe the Cloud Virtual Resource, CloVR, a new desktop application for push-button automated sequence analysis that can utilize cloud computing resources. CloVR is implemented as a single portable virtual machine (VM) that provides several automated analysis pipelines for microbial genomics, including 16S, whole genome and metagenome sequence analysis. The CloVR VM runs on a personal computer, utilizes local computer resources and requires minimal installation, addressing key challenges in deploying bioinformatics workflows. In addition CloVR supports use of remote cloud computing resources to improve performance for large-scale sequence processing. In a case study, we demonstrate the use of CloVR to automatically process next-generation sequencing data on multiple cloud computing platforms. Conclusion The CloVR VM and associated architecture lowers the barrier of entry for utilizing complex analysis protocols on both local single- and multi-core computers and cloud systems for high throughput data processing. PMID:21878105

Simulation Packages Expand Aircraft Design Options

Science.gov (United States)

2013-01-01

In 2001, NASA released a new approach to computational fluid dynamics that allows users to perform automated analysis on complex vehicle designs. In 2010, Palo Alto, California-based Desktop Aeronautics acquired a license from Ames Research Center to sell the technology. Today, the product assists organizations in the design of subsonic aircraft, space planes, spacecraft, and high speed commercial jets.

Downsizing information systems : framing the issues for the Office of Naval Intelligence (ONI)

OpenAIRE

Hutson, Peter M.

1994-01-01

Downsizing information systems from large and centralized mainframe computing architectures to smaller and distributed desktop systems is one of the most difficult and critical strategic decisions facing both corporate and government organizations. Vendor advertisements and media hype often boast of huge cost savings and greater flexibility while retaining mainframe-strength performance. Cryptic terminology, biased vendor assistance, and rapidly changing technology complicate already difficul...

Advantage and choice: social relationships and staff assistance in assisted living.

Science.gov (United States)

Burge, Stephanie; Street, Debra

2010-05-01

OBJECTIVES. To understand how "cumulative inequality" (CI), expressed as individual advantage and choice, and "external social supports" contribute to the quality of social relationships and perceptions of staff assistance for older individuals in different assisted living (AL) settings. Data are from 429 cognitively intact AL residents aged 60 years and older interviewed for the Florida Study of Assisted Living. Bivariate and multivariate statistical analyses show how individual advantage and choice and external social networks influence respondents' social relationships and staff assistance in AL. Controlling for resident and facility characteristics, being able to pay privately enhances resident satisfaction with staff assistance and having control over the move to AL is positively associated with perceptions of staff relationships and assistance. Maintaining contact with pre-AL friends predicts quality of coresident relationships, as does family contact. Regular contact with family buffers some of the disadvantages associated with CI for perceptions of staff relationships but not perceptions of staff assistance. Discussion. Individual advantage and choice influence the quality of staff relationships and assistance for AL residents but matter little for coresident relationships. External social relationships buffer some of the risks associated with CI for perceptions of staff relationships but not perceived quality of staff assistance. Findings highlight outcomes associated with CI, including predictable risks that disadvantaged elders face in particular types of AL settings, differential advantages others enjoy that influence positive perceptions of staff relationships and staff assistance, and the enduring importance of supportive social relationships.

Screening Approach to the Activation of Soil and Contamination of Groundwater at Linear Proton Accelerator Sites

CERN Document Server

Otto, Thomas

The activation of soil and the contamination of groundwater at proton accelerator sites with the radionuclides 3H and 22Na are estimated with a Monte-Carlo calculation and a conservative soil- and ground water model. The obtained radionuclide concentrations show that the underground environment of future accelerators must be adequately protected against a migration of activation products. This study is of particular importance for the proton driver accelerator in the planned EURISOL facility.

Assisted Vaginal Delivery

Science.gov (United States)

... Education & Events Advocacy For Patients About ACOG Assisted Vaginal Delivery Home For Patients Search FAQs Assisted Vaginal ... Vaginal Delivery FAQ192, February 2016 PDF Format Assisted Vaginal Delivery Labor, Delivery, and Postpartum Care What is ...

Oracle Application Express 5 for beginners a practical guide to rapidly develop data-centric web applications accessible from desktop, laptops, tablets, and smartphones

CERN Document Server

2015-01-01

Oracle Application Express has taken another big leap towards becoming a true next generation RAD tool. It has entered into its fifth version to build robust web applications. One of the most significant feature in this release is a new page designer that helps developers create and edit page elements within a single page design view, which enormously maximizes developer productivity. Without involving the audience too much into the boring bits, this full colored edition adopts an inspiring approach that helps beginners practically evaluate almost every feature of Oracle Application Express, including all features new to version 5. The most convincing way to explore a technology is to apply it to a real world problem. In this book, you’ll develop a sales application that demonstrates almost every feature to practically expose the anatomy of Oracle Application Express 5. The short list below presents some main topics of Oracle APEX covered in this book: Rapid web application development for desktops, la...

Strength of PLA Components Fabricated with Fused Deposition Technology Using a Desktop 3D Printer as a Function of Geometrical Parameters of the Process

Directory of Open Access Journals (Sweden)

Vladimir E. Kuznetsov

2018-03-01

Full Text Available The current paper studies the influence of geometrical parameters of the fused deposition modeling (FDM—fused filament fabrication (FFF 3D printing process on printed part strength for open source desktop 3D printers and the most popular material used for that purpose—i.e., polylactic acid (PLA. The study was conducted using a set of different nozzles (0.4, 0.6, and 0.8 mm and a range of layer heights from the minimum to maximum physical limits of the machine. To assess print strength, a novel assessment method is proposed. A tubular sample is loaded in the weakest direction (across layers in a three-point bending fixture. Mesostructure evaluation through scanning electronic microscopy (SEM scans of the samples was used to explain the obtained results. We detected a significant influence of geometric process parameters on sample mesostructure, and consequently, on sample strength.

Desktop mapping using GPS. SAHTI - a software package for environmental monitoring. Report on task JNTB898 on the Finnish support programme to IAEA safeguards

Energy Technology Data Exchange (ETDEWEB)

Ilander, T; Kansanaho, A; Toivonen, H

1996-02-01

Environmental sampling is the key method of the IAEA in searching signatures of a covert nuclear programme. However, it is not always easy to know the exact location of the sampling site. The satellite navigation system, utilizing a small receiver (GPS) and a PC, allows to have independent positioning data easily. The present task on the Finnish Support Programme was launched to create software to merge information about sampling and positioning. The system is build above a desktop mapping software package. However, the result of the development goes beyond the initial goal: the software can be used to real- time positioning in a mobile unit utilizing maps that can be purchased or produced by the user. In addition, the system can be easily enlarged to visualize data in real time from mobile environmental monitors, such as a Geiger counter, a pressurized ionisation chamber of a gamma-ray spectrometer. (orig.) (7 figs.).

Desktop mapping using GPS. SAHTI - a software package for environmental monitoring. Report on task JNTB898 on the Finnish support programme to IAEA safeguards

International Nuclear Information System (INIS)

Ilander, T.; Kansanaho, A.; Toivonen, H.

1996-02-01

Environmental sampling is the key method of the IAEA in searching signatures of a covert nuclear programme. However, it is not always easy to know the exact location of the sampling site. The satellite navigation system, utilizing a small receiver (GPS) and a PC, allows to have independent positioning data easily. The present task on the Finnish Support Programme was launched to create software to merge information about sampling and positioning. The system is build above a desktop mapping software package. However, the result of the development goes beyond the initial goal: the software can be used to real- time positioning in a mobile unit utilizing maps that can be purchased or produced by the user. In addition, the system can be easily enlarged to visualize data in real time from mobile environmental monitors, such as a Geiger counter, a pressurized ionisation chamber of a gamma-ray spectrometer. (orig.) (7 figs.)

FEMA Hazard Mitigation Assistance Flood Mitigation Assistance (FMA) Data

Data.gov (United States)

Department of Homeland Security — This dataset contains closed and obligated projects funded under the following Hazard Mitigation Assistance (HMA) grant programs: Flood Mitigation Assistance (FMA)....

Development of brake assist system. Summary of hydraulic brake assist system; Brake assist system no kaihatsu. Ekiatsushiki brake assist system no gaiyo

Energy Technology Data Exchange (ETDEWEB)

Hara, M; Ota, M; Shimizu, S [Toyota, Motor Corp., Aichi (Japan)

1997-10-01

We have already developed vacuum-booster-type Brake Assist System that supplies additional braking power when panic braking is recognized. We are convinced that the expansion of Brake Assist System will become more important issue in the future. Therefore we have developed hydraulic Brake Assist System with increasing its controllability and reducing its discomfort. This system have a brake pressure sensor to detect emergency braking operation and an antilock device to supply additional braking power. 8 refs., 11 figs.

Analisis Kebutuhan Bandwidth Pada Pemanfaatan Web Streaming Justin.tv Sebagai Media E-Learning Dengan Menggunakan Wirecast Dan Desktop Presenter

Directory of Open Access Journals (Sweden)

Muhammad Ubaidilah

2014-05-01

Full Text Available Perkembangan teknologi informasi begitu cepat seperti sekarang telah banyak mengubah sudut pandang banyak orang, antara lain sudut pandang orang untuk mengubah dunia pendidikan menjadi lebih baik. Salah satu contohnya pembelajaran berbasis Information and Communication Technologies (ICT yaitu pembelajaran menggunakan video streaming. Dengan instalasi software open source Wirecast dan Desktop presenter digunakan untuk membuat video pembelajaran Streaming, disiarkan secara real time melalui media broadcast justin.tv (internet TV Channel, diharapkan dapat lebih mendukung konsep pembelajaran kapan dan dimana saja. Masalah terbesar dari teknologi ini adalah keterbatasan bandwidth. Bandwidth adalah parameter penting untuk melakukan streaming dalam jaringan. Sedangkan proses komunikasi menggunakan video digital ini menghabiskan resource yang cukup besar. Sehingga penggunaan wireshark di sini sangat diperlukan untuk menganalisis bandwidth pada paket yang diterima oleh client. Dari hasil pengukuran video dengan standar H.264 resolusi (720 x 540, dengan rata-rata 20 menit dalam pengambilan sampel, sebanyak 30 pengujian sampel streaming video menggunakan wireshark, diperoleh rata-rata throughput keseluruhan 0,343 Mbps, rata-rata throughput terendah 0,309 Mbps dan throughput tertinggi 0,372 Mbps. Dapat disimpulkan bahwa jika dihasilkan throughput yang lebih besar maka kualitas video streaming akan lebih baik, tetapi jika throughput dihasilkan semakin kecil maka kualitas video streaming akan menurun

Assistive Technology

Science.gov (United States)

... Page Resize Text Printer Friendly Online Chat Assistive Technology Assistive technology (AT) is any service or tool that helps ... be difficult or impossible. For older adults, such technology may be a walker to improve mobility or ...

Robot assistant versus human or another robot assistant in patients undergoing laparoscopic cholecystectomy.

Science.gov (United States)

Gurusamy, Kurinchi Selvan; Samraj, Kumarakrishnan; Fusai, Giuseppe; Davidson, Brian R

2012-09-12

The role of a robotic assistant in laparoscopic cholecystectomy is controversial. While some trials have shown distinct advantages of a robotic assistant over a human assistant others have not, and it is unclear which robotic assistant is best. The aims of this review are to assess the benefits and harms of a robot assistant versus human assistant or versus another robot assistant in laparoscopic cholecystectomy, and to assess whether the robot can substitute the human assistant. We searched the Cochrane Central Register of Controlled Trials (CENTRAL) in The Cochrane Library, MEDLINE, EMBASE, and Science Citation Index Expanded (until February 2012) for identifying the randomised clinical trials. Only randomised clinical trials (irrespective of language, blinding, or publication status) comparing robot assistants versus human assistants in laparoscopic cholecystectomy were considered for the review. Randomised clinical trials comparing different types of robot assistants were also considered for the review. Two authors independently identified the trials for inclusion and independently extracted the data. We calculated the risk ratio (RR) or mean difference (MD) with 95% confidence interval (CI) using the fixed-effect and the random-effects models based on intention-to-treat analysis, when possible, using Review Manager 5. We included six trials with 560 patients. One trial involving 129 patients did not state the number of patients randomised to the two groups. In the remaining five trials 431 patients were randomised, 212 to the robot assistant group and 219 to the human assistant group. All the trials were at high risk of bias. Mortality and morbidity were reported in only one trial with 40 patients. There was no mortality or morbidity in either group. Mortality and morbidity were not reported in the remaining trials. Quality of life or the proportion of patients who were discharged as day-patient laparoscopic cholecystectomy patients were not reported in any

Assisted suicide and euthanasia.

Science.gov (United States)

van der Heide, Agnes

2013-01-01

Several countries have adopted laws that regulate physician assistance in dying. Such assistance may consist of providing a patient with a prescription of lethal medication that is self-administered by the patient, which is usually referred to as (physician) assistance in suicide, or of administering lethal medication to a patient, which is referred to as euthanasia. The main aim of regulating physician assistance in dying is to bring these practices into the open and to provide physicians with legal certainty. A key condition in all jurisdictions that have regulated either assistance in suicide or euthanasia is that physicians are only allowed to engage in these acts upon the explicit and voluntary request of the patient. All systems that allow physician assistance in dying have also in some way included the notion that physician assistance in dying is only accepted when it is the only means to address severe suffering from an incurable medical condition. Arguments against the legal regulation of physician assistance in dying include principled arguments, such as the wrongness of hastening death, and arguments that emphasize the negative consequences of allowing physician assistance in dying, such as a devaluation of the lives of older people, or people with chronic disease or disabilities. Opinion polls show that some form of accepting and regulating euthanasia and physician assistance in suicide is increasingly supported by the general population in most western countries. Studies in countries where physician assistance in dying is regulated suggest that practices have remained rather stable in most jurisdictions and that physicians adhere to the legal criteria in the vast majority of cases. © 2013 Elsevier B.V. All rights reserved.

Characterization of chemical contaminants generated by a desktop fused deposition modeling 3-dimensional Printer.

Science.gov (United States)

Stefaniak, Aleksandr B; LeBouf, Ryan F; Yi, Jinghai; Ham, Jason; Nurkewicz, Timothy; Schwegler-Berry, Diane E; Chen, Bean T; Wells, J Raymond; Duling, Matthew G; Lawrence, Robert B; Martin, Stephen B; Johnson, Alyson R; Virji, M Abbas

2017-07-01

Printing devices are known to emit chemicals into the indoor atmosphere. Understanding factors that influence release of chemical contaminants from printers is necessary to develop effective exposure assessment and control strategies. In this study, a desktop fused deposition modeling (FDM) 3-dimensional (3-D) printer using acrylonitrile butadiene styrene (ABS) or polylactic acid (PLA) filaments and two monochrome laser printers were evaluated in a 0.5 m 3 chamber. During printing, chamber air was monitored for vapors using a real-time photoionization detector (results expressed as isobutylene equivalents) to measure total volatile organic compound (TVOC) concentrations, evacuated canisters to identify specific VOCs by off-line gas chromatography-mass spectrometry (GC-MS) analysis, and liquid bubblers to identify carbonyl compounds by GC-MS. Airborne particles were collected on filters for off-line analysis using scanning electron microscopy with an energy dispersive x-ray detector to identify elemental constituents. For 3-D printing, TVOC emission rates were influenced by a printer malfunction, filament type, and to a lesser extent, by filament color; however, rates were not influenced by the number of printer nozzles used or the manufacturer's provided cover. TVOC emission rates were significantly lower for the 3-D printer (49-3552 µg h -1 ) compared to the laser printers (5782-7735 µg h -1 ). A total of 14 VOCs were identified during 3-D printing that were not present during laser printing. 3-D printed objects continued to off-gas styrene, indicating potential for continued exposure after the print job is completed. Carbonyl reaction products were likely formed from emissions of the 3-D printer, including 4-oxopentanal. Ultrafine particles generated by the 3-D printer using ABS and a laser printer contained chromium. Consideration of the factors that influenced the release of chemical contaminants (including known and suspected asthmagens such as styrene and

Substitution of Assisted Living Services by Assistive Technology - Experts Opinions and Technical Feasibility.

Science.gov (United States)

Schwartze, Jonas; Prekazi, Arianit; Schrom, Harald; Marschollek, Michael

2017-01-01

Ambient assisted living (AAL) may support ageing in place but is primarily driven by technology. The aim of this work is, to identifying reasons to move into assisted living institutions, their range of service and possible substitutability. We did semi-structured interviews with five experts from assisted living institutions and used results to design and implement assistive technologies in an AAL environment using BASIS, a cross domain bus system for smart buildings. Reasons for moving to assisted living institutions are expected benefits for chronic health problems, safety, social isolation and carefree living. We implemented six application systems for inactivity monitoring, stove shutdown, air quality monitoring, medication and appointment reminders, detection of unwanted situations before leaving and optical ringing of the doorbell. Substitution of selected assisted living services is feasible and has potential to delay necessity to move into assisted living institution if complement social services are installed.

Intelligent assistive robots recent advances in assistive robotics for everyday activities

CERN Document Server

Moreno, Juan; Kong, Kyoungchul; Amirat, Yacine

2015-01-01

This book deals with the growing challenges of using assistive robots in our everyday activities along with providing intelligent assistive services. The presented applications concern mainly healthcare and wellness such as helping elderly people, assisting dependent persons, habitat monitoring in smart environments, well-being, security, etc. These applications reveal also new challenges regarding control theory, mechanical design, mechatronics, portability, acceptability, scalability, security, etc.  

Why not Commercial Assistance for Suicide? On the Question of Argumentative Coherence of Endorsing Assisted Suicide.

Science.gov (United States)

Kipke, Roland

2015-09-01

Most people who endorse physician-assisted suicide are against commercially assisted suicide - a suicide assisted by professional non-medical providers against payment. The article questions if this position - endorsement of physician-assisted suicide on the one hand and rejection of commercially assisted suicide on the other hand - is a coherent ethical position. To this end the article first discusses some obvious advantages of commercially assisted suicide and then scrutinizes six types of argument about whether they can justify the rejection of commercially assisted suicide while simultaneously endorsing physician-assisted suicide. The conclusion is that they cannot provide this justification and that the mentioned position is not coherent. People who endorse physician-assisted suicide have to endorse commercially assisted suicide as well, or they have to revise their endorsement of physician-assisted suicide. © 2014 John Wiley & Sons Ltd.

High temperature tests for graphite materials

OpenAIRE

Zhmurikov, Evgenij

2015-01-01

This study was performed within the framework of the EURISOL for facilities SPIRAL-II (GANIL, France) and SPES (LNL, Italy), and aims to investigate the anticipated strength properties of fine-grained graphite at elevated temperatures. It appears that the major parameters that affect to the lifetime of a graphite target of this IP are the temperature and heating time. High temperature tests were conducted to simulate the heating under the influence of a beam of heavy particles by passing thro...

TARPIPE: TARget Prototype Irradiations at PSI for EURISOL

CERN Document Server

E. Bouquerel1, R. Catherall1, S. Fernandes1, I. Guenther-Leopold2, F. Groeschel2, A. Kalt2, J.

The selection of target materials for the production of radioactive nuclear beams is made on thebasis of several criteria that include the production cross-sections for isotopes of interest,diffusion, effusion, ageing and heat dissipation. Optimal target materials are often the result ofcompromises between these properties, which must be preserved under damaging operationconditions...

Ubiquitous Accessibility for People with Visual Impairments: Are We There Yet?

Science.gov (United States)

Billah, Syed Masum; Ashok, Vikas; Porter, Donald E; Ramakrishnan, I V

2017-05-01

Ubiquitous access is an increasingly common vision of computing, wherein users can interact with any computing device or service from anywhere, at any time. In the era of personal computing, users with visual impairments required special-purpose, assistive technologies, such as screen readers, to interact with computers. This paper investigates whether technologies like screen readers have kept pace with, or have created a barrier to, the trend toward ubiquitous access, with a specific focus on desktop computing as this is still the primary way computers are used in education and employment. Towards that, the paper presents a user study with 21 visually-impaired participants, specifically involving the switching of screen readers within and across different computing platforms, and the use of screen readers in remote access scenarios. Among the findings, the study shows that, even for remote desktop access-an early forerunner of true ubiquitous access-screen readers are too limited, if not unusable. The study also identifies several accessibility needs, such as uniformity of navigational experience across devices, and recommends potential solutions. In summary, assistive technologies have not made the jump into the era of ubiquitous access, and multiple, inconsistent screen readers create new practical problems for users with visual impairments.

ForeignAssistance.gov

Data.gov (United States)

US Agency for International Development — ForeignAssistance.gov provides a view of U.S. Government foreign assistance funds across agencies and enables users to explore, analyze, and review aid investments...

Characterization of emissions from a desktop 3D printer and indoor air measurements in office settings.

Science.gov (United States)

Steinle, Patrick

2016-01-01

Emissions from a desktop 3D printer based on fused deposition modeling (FDM) technology were measured in a test chamber and indoor air was monitored in office settings. Ultrafine aerosol (UFA) emissions were higher while printing a standard object with polylactic acid (PLA) than with acrylonitrile butadiene styrene (ABS) polymer (2.1 × 10(9) vs. 2.4 × 10(8) particles/min). Prolonged use of the printer led to higher emission rates (factor 2 with PLA and 4 with ABS, measured after seven months of occasional use). UFA consisted mainly of volatile droplets, and some small (100-300 nm diameter) iron containing and soot-like particles were found. Emissions of inhalable and respirable dust were below the limit of detection (LOD) when measured gravimetrically, and only slightly higher than background when measured with an aerosol spectrometer. Emissions of volatile organic compounds (VOC) were in the range of 10 µg/min. Styrene accounted for more than 50% of total VOC emitted when printing with ABS; for PLA, methyl methacrylate (MMA, 37% of TVOC) was detected as the predominant compound. Two polycyclic aromatic hydrocarbons (PAH), fluoranthene and pyrene, were observed in very low amounts. All other analyzed PAH, as well as inorganic gases and metal emissions except iron (Fe) and zinc (Zn), were below the LOD or did not differ from background without printing. A single 3D print (165 min) in a large, well-ventilated office did not significantly increase the UFA and VOC concentrations, whereas these were readily detectable in a small, unventilated room, with UFA concentrations increasing by 2,000 particles/cm(3) and MMA reaching a peak of 21 µg/m(3) and still being detectable in the room even 20 hr after printing.

Vacuum-assisted delivery

Science.gov (United States)

... medlineplus.gov/ency/patientinstructions/000514.htm Vacuum-assisted delivery To use the sharing features on this page, ... through the birth canal. When is Vacuum-assisted Delivery Needed? Even after your cervix is fully dilated ( ...

Computer assisted roentgenology

International Nuclear Information System (INIS)

Trajkova, N.; Velkova, K.

1999-01-01

This is a report on the potentials and superiorities of computer tomography (CT), assumed as an up-to-date imaging examination method in medicine. The current trend in the development of computer assisted roentgenology consists in the implementation of new computer and communication systems promoting diagnostic and therapeutic activities. CT-study application is discussed with special reference to diagnosis and treatment of brain, lung, mediastinal and abdominal diseases. The new trends in the particular implementation of CT are presented, namely: CT-assisted biopsy, CT-assisted abscess drainage, drug administration under CT control, as well as the wide use of CT in orthopaedic surgery, otorinolaryngology etc. Also emphasis is laid on the important role played by three-dimensional technologies in computer-assisted surgery, leading to qualitatively new stage in the surgical therapeutic approach to patients

Discovering Hidden Resources: Assistive Technology Recycling, Refurbishing, and Redistribution. RESNA Technical Assistance Project.

Science.gov (United States)

RESNA: Association for the Advancement of Rehabilitation Technology, Arlington, VA.

This monograph discusses the benefits of recycling and reusing assistive technology for students with disabilities. It begins by discussing the benefits of recycled assistive technology for suppliers, students, and consumers, and then profiles programmatic models for assistive technology recycling programs. The advantages and disadvantages for…

Development of research activity supporting system. 2. Evaluation of desktop video conferencing; Kenkyu katsudo shien system no kaihatsu. 2. Enkaku kijo uchiawase hoshiki no jitsuyosei hyoka

Energy Technology Data Exchange (ETDEWEB)

Tsutsumi, F.; Hishitani, J.; Matsui, S. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

1996-03-01

Desktop video conferencing (DVC) system and its software were investigated. A test system was actually constructed. Based on the test results, its practical advantage and disadvantage were illustrated. The DVC system was constructed using general LAN, and operation experiments were conducted, as to research activity. From the interview with participants and analysis of conversation history, advantage and disadvantage of this system were clarified. Performance of the trial system was examined using practical LAN, to compare with the performance of commercial systems. When using LAN, the same problems were given. It was found that the DVC system can not substitute for the conventional real face to face meeting, but it is suitable for some communication styles, for example free participation meeting or collaboration based on the same objective, which has been hard up to this time. In addition, software was made as trial, by which reservation of meeting, announcement, and calling can be carried out. 26 refs., 6 figs., 5 tabs.

76 FR 6810 - Announcement of Funding Awards for the Special Needs Assistance Programs-Technical Assistance...

Science.gov (United States)

2011-02-08

... Awards for the Special Needs Assistance Programs--Technical Assistance (SNAPS--TA) Fiscal Year 2010... funding awards for HUD'S Fiscal Year 2010 Special Needs Assistance Programs--Technical Assistance (SNAPS... Department in a competition for funding under the Notice of Funding Availability (NOFA) for the Special Needs...

Computer assisted radiology

International Nuclear Information System (INIS)

Lemke, H.U.; Jaffe, C.C.; Felix, R.

1993-01-01

The proceedings of the CAR'93 symposium present the 126 oral papers and the 58 posters contributed to the four Technical Sessions entitled: (1) Image Management, (2) Medical Workstations, (3) Digital Image Generation - DIG, and (4) Application Systems - AS. Topics discussed in Session (1) are: picture archiving and communication systems, teleradiology, hospital information systems and radiological information systems, technology assessment and implications, standards, and data bases. Session (2) deals with computer vision, computer graphics, design and application, man computer interaction. Session (3) goes into the details of the diagnostic examination methods such as digital radiography, MRI, CT, nuclear medicine, ultrasound, digital angiography, and multimodality imaging. Session (4) is devoted to computer-assisted techniques, as there are: computer assisted radiological diagnosis, knowledge based systems, computer assisted radiation therapy and computer assisted surgical planning. (UWA). 266 figs [de

D Virtual CH Interactive Information Systems for a Smart Web Browsing Experience for Desktop Pcs and Mobile Devices

Science.gov (United States)

Scianna, A.; La Guardia, M.

2018-05-01

Recently, the diffusion of knowledge on Cultural Heritage (CH) has become an element of primary importance for its valorization. At the same time, the diffusion of surveys based on UAV Unmanned Aerial Vehicles (UAV) technologies and new methods of photogrammetric reconstruction have opened new possibilities for 3D CH representation. Furthermore the recent development of faster and more stable internet connections leads people to increase the use of mobile devices. In the light of all this, the importance of the development of Virtual Reality (VR) environments applied to CH is strategic for the diffusion of knowledge in a smart solution. In particular, the present work shows how, starting from a basic survey and the further photogrammetric reconstruction of a cultural good, is possible to built a 3D CH interactive information system useful for desktop and mobile devices. For this experimentation the Arab-Norman church of the Trinity of Delia (in Castelvetrano-Sicily-Italy) has been adopted as case study. The survey operations have been carried out considering different rapid methods of acquisition (UAV camera, SLR camera and smartphone camera). The web platform to publish the 3D information has been built using HTML5 markup language and WebGL JavaScript libraries (Three.js libraries). This work presents the construction of a 3D navigation system for a web-browsing of a virtual CH environment, with the integration of first person controls and 3D popup links. This contribution adds a further step to enrich the possibilities of open-source technologies applied to the world of CH valorization on web.

Foreign Assistance: Treasury's Technical Assistance Program

National Research Council Canada - National Science Library

Ford, Jess

1999-01-01

After the collapse of communism in Central Europe and the dissolution of the Soviet Union, the United States developed programs of technical assistance to help countries transition to market economies and democracy...

AssistMe robot, an assistance robotic platform

Directory of Open Access Journals (Sweden)

A. I. Alexan

2012-06-01

Full Text Available This paper presents the design and implementation of a full size assistance robot. Its main purpose it to assist a person and eventually avoid a life threatening situation. Its implementation revolves around a chipKIT Arduino board that interconnects a robotic base controller with a 7 inch TABLET PC and various sensors. Due to the Android and Arduino combination, the robot can interact with the person and provide an easy development platform for future improvement and feature adding. The TABLET PC is Webcam, WIFI and Bluetooth enabled, offering a versatile platform that is able to process data and in the same time provide the user a friendly interface.

Training Teaching Assistants.

Science.gov (United States)

Rava, Susan

1987-01-01

Washington University's (Missouri) Department of Romance Languages and Literature requires its graduate teaching assistants to take a one-semester pedagogy course to ensure their competence and effectiveness as teaching assistants. The course features seminars in which goals, expectations, and learning theories are discussed and practice teaching…

Assistance dogs provide a useful behavioral model to enrich communicative skills of assistance robots.

Science.gov (United States)

Gácsi, Márta; Szakadát, Sára; Miklósi, Adám

2013-01-01

These studies are part of a project aiming to reveal relevant aspects of human-dog interactions, which could serve as a model to design successful human-robot interactions. Presently there are no successfully commercialized assistance robots, however, assistance dogs work efficiently as partners for persons with disabilities. In Study 1, we analyzed the cooperation of 32 assistance dog-owner dyads performing a carrying task. We revealed typical behavior sequences and also differences depending on the dyads' experiences and on whether the owner was a wheelchair user. In Study 2, we investigated dogs' responses to unforeseen difficulties during a retrieving task in two contexts. Dogs displayed specific communicative and displacement behaviors, and a strong commitment to execute the insoluble task. Questionnaire data from Study 3 confirmed that these behaviors could successfully attenuate owners' disappointment. Although owners anticipated the technical competence of future assistance robots to be moderate/high, they could not imagine robots as emotional companions, which negatively affected their acceptance ratings of future robotic assistants. We propose that assistance dogs' cooperative behaviors and problem solving strategies should inspire the development of the relevant functions and social behaviors of assistance robots with limited manual and verbal skills.

How residents and interns utilise and perceive the personal digital assistant and UpToDate

Directory of Open Access Journals (Sweden)

Lim Tow

2008-07-01

Full Text Available Abstract Background In this era of evidence-based medicine, doctors are increasingly using information technology to acquire medical knowledge. This study evaluates how residents and interns utilise and perceive the personal digital assistant (PDA and the online resource UpToDate. Methods This is a questionnaire survey of all residents and interns in a tertiary teaching hospital. Results Out of 168 doctors, 134 (79.8% responded to the questionnaire. Only 54 doctors (40.3% owned a PDA. Although these owners perceived that the PDA was most useful for providing drug information, followed by medical references, scheduling and medical calculators, the majority of them did not actually have medical software applications downloaded on their PDAs. The greatest concerns highlighted for the PDA were the fear of loss and breakage, and the preference for working with desktop computers and paper. Meanwhile, only 76 doctors (56.7% used UpToDate, even though the hospital had an institutional subscription for it. Although 93.4% of these users would recommend UpToDate to a colleague, only 57.9% stated that the use of UpToDate had led to a change in their management of patients. Conclusion Although UpToDate and various PDA software applications were deemed useful by some of the residents and interns in our study, both digital tools were under-utilised. More should be done to facilitate the use of medical software applications on PDAs, to promote awareness of tools for evidence-based medicine such as UpToDate, and to facilitate the application of evidence-based medicine in daily clinical practice.

34 CFR 366.11 - What financial assistance does the Secretary provide for training and technical assistance?

Science.gov (United States)

2010-07-01

... for training and technical assistance? 366.11 Section 366.11 Education Regulations of the Offices of..., DEPARTMENT OF EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.11 What financial assistance does the Secretary provide for training and technical assistance? (a) From funds, if...

34 CFR 366.10 - What agencies are eligible for assistance to provide training and technical assistance?

Science.gov (United States)

2010-07-01

... training and technical assistance? 366.10 Section 366.10 Education Regulations of the Offices of the... EDUCATION CENTERS FOR INDEPENDENT LIVING Training and Technical Assistance § 366.10 What agencies are eligible for assistance to provide training and technical assistance? Entities that have experience in the...

DISTRIBUTED COMPUTING SUPPORT CONTRACT USER SURVEY

CERN Multimedia

2001-01-01

IT Division operates a Distributed Computing Support Service, which offers support to owners and users of all variety of desktops throughout CERN as well as more dedicated services for certain groups, divisions and experiments. It also provides the staff who operate the central and satellite Computing Helpdesks, it supports printers throughout the site and it provides the installation activities of the IT Division PC Service. We have published a questionnaire which seeks to gather your feedback on how the services are seen, how they are progressing and how they can be improved. Please take a few minutes to fill in this questionnaire. Replies will be treated in confidence if desired although you may also request an opportunity to be contacted by CERN's service management directly. Please tell us if you met problems but also if you had a successful conclusion to your request for assistance. You will find the questionnaire at the web site http://wwwinfo/support/survey/desktop-contract There will also be a link ...

DISTRIBUTED COMPUTING SUPPORT SERVICE USER SURVEY

CERN Multimedia

2001-01-01

IT Division operates a Distributed Computing Support Service, which offers support to owners and users of all variety of desktops throughout CERN as well as more dedicated services for certain groups, divisions and experiments. It also provides the staff who operate the central and satellite Computing Helpdesks, it supports printers throughout the site and it provides the installation activities of the IT Division PC Service. We have published a questionnaire, which seeks to gather your feedback on how the services are seen, how they are progressing and how they can be improved. Please take a few minutes to fill in this questionnaire. Replies will be treated in confidence if desired although you may also request an opportunity to be contacted by CERN's service management directly. Please tell us if you met problems but also if you had a successful conclusion to your request for assistance. You will find the questionnaire at the web site http://wwwinfo/support/survey/desktop-contract There will also be a link...

25 CFR 20.210 - Can eligibility criteria or payments for Burial Assistance, Child Assistance, and Disaster...

Science.gov (United States)

2010-04-01

... provided by law, the Bureau nor a tribe may change eligibility criteria or levels of payment for Burial Assistance, Child Assistance, Disaster Assistance, and Emergency Assistance awarded in Public Law 93-638 contracts, Public Law 102-477 grants, or Public Law 103-413 self-governance annual funding agreements. ...

Developing open source, self-contained disease surveillance software applications for use in resource-limited settings

Directory of Open Access Journals (Sweden)

Campbell Timothy C

2012-09-01

Full Text Available Abstract Background Emerging public health threats often originate in resource-limited countries. In recognition of this fact, the World Health Organization issued revised International Health Regulations in 2005, which call for significantly increased reporting and response capabilities for all signatory nations. Electronic biosurveillance systems can improve the timeliness of public health data collection, aid in the early detection of and response to disease outbreaks, and enhance situational awareness. Methods As components of its Suite for Automated Global bioSurveillance (SAGES program, The Johns Hopkins University Applied Physics Laboratory developed two open-source, electronic biosurveillance systems for use in resource-limited settings. OpenESSENCE provides web-based data entry, analysis, and reporting. ESSENCE Desktop Edition provides similar capabilities for settings without internet access. Both systems may be configured to collect data using locally available cell phone technologies. Results ESSENCE Desktop Edition has been deployed for two years in the Republic of the Philippines. Local health clinics have rapidly adopted the new technology to provide daily reporting, thus eliminating the two-to-three week data lag of the previous paper-based system. Conclusions OpenESSENCE and ESSENCE Desktop Edition are two open-source software products with the capability of significantly improving disease surveillance in a wide range of resource-limited settings. These products, and other emerging surveillance technologies, can assist resource-limited countries compliance with the revised International Health Regulations.

Design of 1+ Ion Source Coupling First Design of the Resonant Ionization Laser Ion Source For the Multi-Mega Watt Target Station

CERN Document Server

A. Olivier-Kaiser, F. Le Blanc, C. Lau

The realisation of next-generation ion sources suitable for the EURISOL multi-mega-watt (MMW) target station needs exhaustive studies and developments. An exhaustive review was carried out to evaluate the capability of the ion-sources to operate under the irradiation conditions of the MMW target station. In addition, selectivity must be taken into account to avoid the spread of unwanted radioactivity out of the target-ion-source system (TIS).These studies led to consider RILIS (Resonance Ionization Laser Ion Source) as the reference ion source for this target station.

Investigation on Ion Source Parameters

CERN Document Server

M. Cheikh Mhamed, S. Essabaa, C. Lau

The EURISOL multi-mega-watt target station requires dedicated radioactive ion sources. Notably, they must be capable of operating under extremely hard radiations and with a larger fission target producing over 1014 fissions/s. The realisation of next-generation ion sources suitable for such operating conditions needs exhaustive studies and developments. In order to take up such a challenge, a review on radioactive ion sources was achieved and the investigation on ion source parameters was in particular focused on a plasma ion source through a R&D program.

Three Paradigms of Social Assistance

Directory of Open Access Journals (Sweden)

Pierre-Marc Daigneault

2014-11-01

Full Text Available “Ideas,” which are defined as the normative and cognitive beliefs of actors, are fundamental to a full understanding of the welfare state and, in particular, of social assistance. However, policy ideas have been neglected in most typologies of social assistance regimes. Based on a selective review of the literature, this article proposes a brief but systematic analysis of policy paradigms in the field of social assistance. Three ideal types that emphasize the ideational dimension of social assistance are analyzed, namely, the entitlement, workfare, and activation paradigms. The value of the typology lies in its utility for characterizing the ideational orientation of social assistance regimes. Specifically, the typology provides a yardstick for measuring the ideas of policy actors with respect to social assistance and can facilitate the conduct of case studies, comparative research, and causal analyses on this policy sector.

Development of mechanical brake assist; Mechanical brake assist no kaihatsu

Energy Technology Data Exchange (ETDEWEB)

Konishi, M; Shingyoji, S; Nakamura, I; Tagawa, T; Saito, Y; Ishihara, T; Kobayashi, S; Yoshida, M [Nissan Motor Co. Ltd., Tokyo (Japan)

1997-10-01

We have recognized that there are drivers who cannot apply strong brake pedal force , in spite of the necessity of hard braking in emergencies. We have developed a `mechanical brake assist system` which assists drivers appropriately, according to the drivers` characteristics based on studying the characteristic`s of conditions of drivers applying the brake pedal force in emergency conditions. 2 refs., 7 figs., 1 tab.

Quality of information about success rates provided on assisted reproductive technology clinic websites in Australia and New Zealand.

Science.gov (United States)

Hammarberg, Karin; Prentice, Tess; Purcell, Isabelle; Johnson, Louise

2018-06-01

Many factors influence the chance of having a baby with assisted reproductive technologies (ART). A 2016 Australian Competition and Consumer Commission (ACCC) investigation concluded that ART clinics needed to improve the quality of information they provide about chance of ART success. To evaluate changes in the quality of information about success rates provided on the websites of ART clinics in Australia and New Zealand before and after the ACCC investigation. Desktop audits of websites of ART clinics in Australia and New Zealand were conducted in 2016 and 2017 and available information about success rates was scored using a matrix with eight variables and a possible range of scores of 0-9. Of the 54 clinic websites identified in 2016, 32 had unique information and were eligible to be audited. Of these, 29 were also eligible to be audited in 2017. While there was a slight improvement in the mean score from 2016 to 2017 (4.93-5.28), this was not statistically significantly different. Of the 29 clinics, 14 had the same score on both occasions, 10 had a higher and five a lower information quality score in 2017. To allow people who consider ART to make informed decisions about treatment they need comprehensive and accurate information about what treatment entails and what the likely outcomes are. As measured by a scoring matrix, most ART clinics had not improved the quality of the information about success rates following the ACCC investigation. © 2017 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

34 CFR 300.105 - Assistive technology.

Science.gov (United States)

2010-07-01

... 34 Education 2 2010-07-01 2010-07-01 false Assistive technology. 300.105 Section 300.105 Education... DISABILITIES State Eligibility Other Fape Requirements § 300.105 Assistive technology. (a) Each public agency must ensure that assistive technology devices or assistive technology services, or both, as those terms...

Training Students as Technology Assistants.

Science.gov (United States)

Onishi, Esther; Peto, Erica

1996-01-01

Describes a program where fifth and sixth graders are trained as school technology assistants. The childrens' duties include installation of software, making minor repairs, cleaning computer equipment, and assisting teachers and students. Outlines components of the program, lists forms the assistants use and skills they are taught, and provides…

iCAVE: an open source tool for visualizing biomolecular networks in 3D, stereoscopic 3D and immersive 3D.

Science.gov (United States)

Liluashvili, Vaja; Kalayci, Selim; Fluder, Eugene; Wilson, Manda; Gabow, Aaron; Gümüs, Zeynep H

2017-08-01

Visualizations of biomolecular networks assist in systems-level data exploration in many cellular processes. Data generated from high-throughput experiments increasingly inform these networks, yet current tools do not adequately scale with concomitant increase in their size and complexity. We present an open source software platform, interactome-CAVE (iCAVE), for visualizing large and complex biomolecular interaction networks in 3D. Users can explore networks (i) in 3D using a desktop, (ii) in stereoscopic 3D using 3D-vision glasses and a desktop, or (iii) in immersive 3D within a CAVE environment. iCAVE introduces 3D extensions of known 2D network layout, clustering, and edge-bundling algorithms, as well as new 3D network layout algorithms. Furthermore, users can simultaneously query several built-in databases within iCAVE for network generation or visualize their own networks (e.g., disease, drug, protein, metabolite). iCAVE has modular structure that allows rapid development by addition of algorithms, datasets, or features without affecting other parts of the code. Overall, iCAVE is the first freely available open source tool that enables 3D (optionally stereoscopic or immersive) visualizations of complex, dense, or multi-layered biomolecular networks. While primarily designed for researchers utilizing biomolecular networks, iCAVE can assist researchers in any field. © The Authors 2017. Published by Oxford University Press.

Exoskeleton plantarflexion assistance for elderly.

Science.gov (United States)

Galle, S; Derave, W; Bossuyt, F; Calders, P; Malcolm, P; De Clercq, D

2017-02-01

Elderly are confronted with reduced physical capabilities and increased metabolic energy cost of walking. Exoskeletons that assist walking have the potential to restore walking capacity by reducing the metabolic cost of walking. However, it is unclear if current exoskeletons can reduce energy cost in elderly. Our goal was to study the effect of an exoskeleton that assists plantarflexion during push-off on the metabolic energy cost of walking in physically active and healthy elderly. Seven elderly (age 69.3±3.5y) walked on treadmill (1.11ms 2 ) with normal shoes and with the exoskeleton both powered (with assistance) and powered-off (without assistance). After 20min of habituation on a prior day and 5min on the test day, subjects were able to walk with the exoskeleton and assistance of the exoskeleton resulted in a reduction in metabolic cost of 12% versus walking with the exoskeleton powered-off. Walking with the exoskeleton was perceived less fatiguing for the muscles compared to normal walking. Assistance resulted in a statistically nonsignificant reduction in metabolic cost of 4% versus walking with normal shoes, likely due to the penalty of wearing the exoskeleton powered-off. Also, exoskeleton mechanical power was relatively low compared to previously identified optimal assistance magnitude in young adults. Future exoskeleton research should focus on further optimizing exoskeleton assistance for specific populations and on considerate integration of exoskeletons in rehabilitation or in daily life. As such, exoskeletons should allow people to walk longer or faster than without assistance and could result in an increase in physical activity and resulting health benefits. Copyright © 2016 Elsevier B.V. All rights reserved.

Partnership for Prescription Assistance

Science.gov (United States)

... may use our name without our permission. The Partnership for Prescription Assistance will help you find the ... Events Blog Facebook Twitter Start living better. The Partnership for Prescription Assistance helps qualifying patients without prescription ...

Assisted delivery with forceps

Science.gov (United States)

... page: //medlineplus.gov/ency/patientinstructions/000509.htm Assisted delivery with forceps To use the sharing features on ... called vacuum assisted delivery . When is a Forceps Delivery Needed? Even after your cervix is fully dilated ( ...

78 FR 29239 - Final Priority; Technical Assistance To Improve State Data Capacity-National Technical Assistance...

Science.gov (United States)

2013-05-20

... Assistance To Improve State Data Capacity--National Technical Assistance Center To Improve State Capacity To... Education and Rehabilitative Services announces a priority under the Technical Assistance to Improve State... (FY) 2013 and later years. We take this action to focus attention on an identified national need to...

Lung Segmentation Refinement based on Optimal Surface Finding Utilizing a Hybrid Desktop/Virtual Reality User Interface

Science.gov (United States)

Sun, Shanhui; Sonka, Milan; Beichel, Reinhard R.

2013-01-01

Recently, the optimal surface finding (OSF) and layered optimal graph image segmentation of multiple objects and surfaces (LOGISMOS) approaches have been reported with applications to medical image segmentation tasks. While providing high levels of performance, these approaches may locally fail in the presence of pathology or other local challenges. Due to the image data variability, finding a suitable cost function that would be applicable to all image locations may not be feasible. This paper presents a new interactive refinement approach for correcting local segmentation errors in the automated OSF-based segmentation. A hybrid desktop/virtual reality user interface was developed for efficient interaction with the segmentations utilizing state-of-the-art stereoscopic visualization technology and advanced interaction techniques. The user interface allows a natural and interactive manipulation on 3-D surfaces. The approach was evaluated on 30 test cases from 18 CT lung datasets, which showed local segmentation errors after employing an automated OSF-based lung segmentation. The performed experiments exhibited significant increase in performance in terms of mean absolute surface distance errors (2.54 ± 0.75 mm prior to refinement vs. 1.11 ± 0.43 mm post-refinement, p ≪ 0.001). Speed of the interactions is one of the most important aspects leading to the acceptance or rejection of the approach by users expecting real-time interaction experience. The average algorithm computing time per refinement iteration was 150 ms, and the average total user interaction time required for reaching complete operator satisfaction per case was about 2 min. This time was mostly spent on human-controlled manipulation of the object to identify whether additional refinement was necessary and to approve the final segmentation result. The reported principle is generally applicable to segmentation problems beyond lung segmentation in CT scans as long as the underlying segmentation

Lung segmentation refinement based on optimal surface finding utilizing a hybrid desktop/virtual reality user interface.

Science.gov (United States)

Sun, Shanhui; Sonka, Milan; Beichel, Reinhard R

2013-01-01

Recently, the optimal surface finding (OSF) and layered optimal graph image segmentation of multiple objects and surfaces (LOGISMOS) approaches have been reported with applications to medical image segmentation tasks. While providing high levels of performance, these approaches may locally fail in the presence of pathology or other local challenges. Due to the image data variability, finding a suitable cost function that would be applicable to all image locations may not be feasible. This paper presents a new interactive refinement approach for correcting local segmentation errors in the automated OSF-based segmentation. A hybrid desktop/virtual reality user interface was developed for efficient interaction with the segmentations utilizing state-of-the-art stereoscopic visualization technology and advanced interaction techniques. The user interface allows a natural and interactive manipulation of 3-D surfaces. The approach was evaluated on 30 test cases from 18 CT lung datasets, which showed local segmentation errors after employing an automated OSF-based lung segmentation. The performed experiments exhibited significant increase in performance in terms of mean absolute surface distance errors (2.54±0.75 mm prior to refinement vs. 1.11±0.43 mm post-refinement, p≪0.001). Speed of the interactions is one of the most important aspects leading to the acceptance or rejection of the approach by users expecting real-time interaction experience. The average algorithm computing time per refinement iteration was 150 ms, and the average total user interaction time required for reaching complete operator satisfaction was about 2 min per case. This time was mostly spent on human-controlled manipulation of the object to identify whether additional refinement was necessary and to approve the final segmentation result. The reported principle is generally applicable to segmentation problems beyond lung segmentation in CT scans as long as the underlying segmentation utilizes the

A Quality Improvement System to Manage Feeding Assistance Care in Assisted-Living.

Science.gov (United States)

Simmons, Sandra F; Coelho, Chris S; Sandler, Andrew; Schnelle, John F

2018-03-01

To describe a feasible quality improvement system to manage feeding assistance care processes in an assisted living facility (ALF) that provides dementia care and the use of these data to maintain the quality of daily care provision and prevent unintentional weight loss. Supervisory ALF staff used a standardized observational protocol to assess feeding assistance care quality during and between meals for 12 consecutive months for 53 residents receiving dementia care. Direct care staff received feedback about the quality of assistance and consistency of between-meal snack delivery for residents with low meal intake and/or weight loss. On average, 78.4% of the ALF residents consumed more than one-half of each served meal and/or received staff assistance during meals to promote consumption over the 12 months. An average of 79.7% of the residents were offered snacks between meals twice per day. The prevalence of unintentional weight loss averaged 1.3% across 12 months. A quality improvement system resulted in sustained levels of mealtime feeding assistance and between-meal snack delivery and a low prevalence of weight loss among ALF residents receiving dementia care. Given that many ALF residents receiving dementia care are likely to be at risk for low oral intake and unintentional weight loss, ALFs should implement a quality improvement system similar to that described in this project, despite the absence of regulations to do so. Copyright © 2018 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Equity in Assistance? Usability of a U.S. Government Food Assistance Application

Science.gov (United States)

Saal, Leah Katherine

2016-01-01

This article focuses on the quantitative phase of a multiphase mixed methods study investigating adults' and families' access to government food assistance. The research evaluates participants' comprehension of, and ability to, adequately complete authentic complex texts--national food assistance application documents. Summative usability testing…

Robotic assisted laparoscopic colectomy.

LENUS (Irish Health Repository)

Pandalai, S

2010-06-01

Robotic surgery has evolved over the last decade to compensate for limitations in human dexterity. It avoids the need for a trained assistant while decreasing error rates such as perforations. The nature of the robotic assistance varies from voice activated camera control to more elaborate telerobotic systems such as the Zeus and the Da Vinci where the surgeon controls the robotic arms using a console. Herein, we report the first series of robotic assisted colectomies in Ireland using a voice activated camera control system.

Institutionalizing Security Force Assistance

National Research Council Canada - National Science Library

Binetti, Michael R

2008-01-01

.... It looks at the manner in which security assistance guidance is developed and executed. An examination of national level policy and the guidance from senior military and civilian leaders highlights the important role of Security Force Assistance...

[Active euthanasia, or assisted suicide?

Science.gov (United States)

Julesz, Máté

2016-10-01

Both active euthanasia and assisted suicide are legal in The Netherlands, Belgium, Luxemburg and, most recently, in Canada. Examination of national legislations of countries where both active euthanasia and assisted suicide are legal. The number of accomplished active euthanasia cases and that of assisted suicide cases. Analysis of national statistical data. Comparison of statistical data before and after 2010. Comparison of the related practices in the surveyed countries. The number of active euthanasia cases markedly predominates over the number of assisted suicide cases. Cancer is a main reason for active euthanasia, or assisted suicide. In countries with a larger population, the number of active euthanasia cases is higher than that in countries with a smaller population. Regarding the fact that the applicants for active euthanasia withdraw their requests in a smaller number than the applicants for assisted suicide, patients prefer the choice of active euthanasia. Since the related legislative product is too recent in Canada at present, it may be only presumed that a certain preference will also develop in the related practices in Canada. Orv. Hetil., 2016, 157(40), 1595-1600.

Robot-assisted general surgery.

Science.gov (United States)

Hazey, Jeffrey W; Melvin, W Scott

2004-06-01

With the initiation of laparoscopic techniques in general surgery, we have seen a significant expansion of minimally invasive techniques in the last 16 years. More recently, robotic-assisted laparoscopy has moved into the general surgeon's armamentarium to address some of the shortcomings of laparoscopic surgery. AESOP (Computer Motion, Goleta, CA) addressed the issue of visualization as a robotic camera holder. With the introduction of the ZEUS robotic surgical system (Computer Motion), the ability to remotely operate laparoscopic instruments became a reality. US Food and Drug Administration approval in July 2000 of the da Vinci robotic surgical system (Intuitive Surgical, Sunnyvale, CA) further defined the ability of a robotic-assist device to address limitations in laparoscopy. This includes a significant improvement in instrument dexterity, dampening of natural hand tremors, three-dimensional visualization, ergonomics, and camera stability. As experience with robotic technology increased and its applications to advanced laparoscopic procedures have become more understood, more procedures have been performed with robotic assistance. Numerous studies have shown equivalent or improved patient outcomes when robotic-assist devices are used. Initially, robotic-assisted laparoscopic cholecystectomy was deemed safe, and now robotics has been shown to be safe in foregut procedures, including Nissen fundoplication, Heller myotomy, gastric banding procedures, and Roux-en-Y gastric bypass. These techniques have been extrapolated to solid-organ procedures (splenectomy, adrenalectomy, and pancreatic surgery) as well as robotic-assisted laparoscopic colectomy. In this chapter, we review the evolution of robotic technology and its applications in general surgical procedures.

Modeling soil erosion in a watershed

OpenAIRE

Lanuza, R.

1999-01-01

Most erosion models have been developed based on a plot scale and have limited application to a watershed due to the differences in aerial scale. In order to address this limitation, a GIS-assisted methodology for modeling soil erosion was developed using PCRaster to predict the rate of soil erosion at watershed level; identify the location of erosion prone areas; and analyze the impact of landuse changes on soil erosion. The general methodology of desktop modeling or soil erosion at watershe...

Assistant Personal Robot (APR: Conception and Application of a Tele-Operated Assisted Living Robot

Directory of Open Access Journals (Sweden)

Eduard Clotet

2016-04-01

Full Text Available This paper presents the technical description, mechanical design, electronic components, software implementation and possible applications of a tele-operated mobile robot designed as an assisted living tool. This robotic concept has been named Assistant Personal Robot (or APR for short and has been designed as a remotely telecontrolled robotic platform built to provide social and assistive services to elderly people and those with impaired mobility. The APR features a fast high-mobility motion system adapted for tele-operation in plain indoor areas, which incorporates a high-priority collision avoidance procedure. This paper presents the mechanical architecture, electrical fundaments and software implementation required in order to develop the main functionalities of an assistive robot. The APR uses a tablet in order to implement the basic peer-to-peer videoconference and tele-operation control combined with a tactile graphic user interface. The paper also presents the development of some applications proposed in the framework of an assisted living robot.

Laser-assisted fabrication of materials

CERN Document Server

Manna, Indranil

2013-01-01

Laser assisted fabrication involves shaping of materials using laser as a source of heat. It can be achieved by removal of materials (laser assisted cutting, drilling, etc.), deformation (bending, extrusion), joining (welding, soldering) and addition of materials (surface cladding or direct laser cladding). This book on ´Laser assisted Fabrication’ is aimed at developing in-depth engineering concepts on various laser assisted macro and micro-fabrication techniques with the focus on application and a review of the engineering background of different micro/macro-fabrication techniques, thermal history of the treated zone and microstructural development and evolution of properties of the treated zone.

Competition for Assistance Agreements

Science.gov (United States)

It is EPA policy to promote competition in the award of assistance agreements to the maximum extent practicable.When assistance agreements are awarded competitively, it is EPA policy that the competitive process be fair and open & that no applicant receive

Assistive/Socially Assistive Robotic Platform for Therapy and Recovery: Patient Perspectives

Directory of Open Access Journals (Sweden)

Matthew White

2013-01-01

Full Text Available Improving adherence to therapy is a critical component of advancing outcomes and reducing the cost of rehabilitation. A robotic platform was previously developed to explore how robotics could be applied to the social dimension of rehabilitation to improve adherence. This paper aims to report on feedback given by end users of the robotic platform as well as the practical applications that socially assistive robotics could have in the daily life activities of a patient. A group of 10 former and current patients interacted with the developed robotic platform during a simulated exercise session before taking an experience-based survey. A portion of these participants later provided verbal feedback as part of a focus group on the potential utility of such a platform. Identified applications included assistance with reaching exercise goals, managing to-do lists, and supporting participation in social and recreational activities. The study participants expressed that the personality characteristics of the robotic system should be adapted to individual preferences and that the assistance provided over time should align with the progress of their recovery. The results from this study are encouraging and will be useful for further development of socially assistive robotics.

Debates about assisted suicide in Switzerland.

Science.gov (United States)

Burkhardt, Sandra; La Harpe, Romano

2012-12-01

Assisted suicide is allowed in 3 states of the United States (Oregon, Washington, Montana) but only if performed by a physician.On the opposite, in Switzerland, at the beginning of the 20th century, the Swiss Penal Code referred to assisted suicide in the context of honor or an unhappy love affair. It was only in 1985 that Exit Deutsche Schweiz (Exit for German-speaking Switzerland) "medically" assisted the first patient to end his life.Even if authorized by the Swiss law upon certain conditions, assisted suicide is subject to debates for ethical reasons. The Swiss Academy of Medical Sciences described directives to guide physicians on this difficult subject.Different studies showed an increase in the number of medical-assisted suicide in Switzerland since the 1990s. Now, this number seems to be quite stable. Assisted suicide is authorized in a few hospitals under strict conditions (especially when returning home is impossible).Thus, according to the Swiss law, any person could perform assisted suicide; this is essentially performed by 3 main associations, using pentobarbital on medical prescription as lethal substance.Generally speaking, the Swiss population is rather in favor of assisted suicide. Among politics, the debate has been tough until 2010, when the Federal Council decided not to modify the Swiss Penal Code concerning assisted suicide.

System dynamics applied to closed loop supply chains of desktops and laptops in Brazil: A perspective for social inclusion of waste pickers.

Science.gov (United States)

Ghisolfi, Verônica; Diniz Chaves, Gisele de Lorena; Ribeiro Siman, Renato; Xavier, Lúcia Helena

2017-02-01

The structure of reverse logistics for waste electrical and electronic equipment (WEEE) is essential to minimize the impacts of their improper disposal. In this context, the Brazilian Solid Waste Policy (BSWP) was a regulatory milestone in Brazil, submitting WEEE to the mandatory implementation of reverse logistics systems, involving the integration of waste pickers on the shared responsibility for the life cycle of products. This article aims to measure the impact of such legal incentives and the bargaining power obtained by the volume of collected waste on the effective formalization of waste pickers. The proposed model evaluates the sustainability of supply chains in terms of the use of raw materials due to disposal fees, collection, recycling and return of some materials from desktops and laptops using system dynamics methodology. The results show that even in the absence of bargaining power, the formalization of waste pickers occurs due to legal incentives. It is important to ensure the waste pickers cooperatives access to a minimum amount, which requires a level of protection against unfair competition with companies. Regarding the optimal level of environmental policies, even though the formalization time is long, it is still not enough to guarantee the formalization of waste picker cooperatives, which is dependent on their bargaining power. Steel is the material with the largest decrease in acquisition rate of raw material. Copyright © 2016 Elsevier Ltd. All rights reserved.

NORD's Patient Assistance Programs

Science.gov (United States)

... vsl3ds@rarediseases.org Fax: 1-203-349-8172 Urea Cycle Disorder | Accepting Applications Co-Pay Assistance Medical Assistance Medical ... this program here* *aprender más sobre este programa* Urea Cycle Disorders Diagnostic Testing Phone: 877-333-1860 Fax: 203- ...

Steering and evasion assist

NARCIS (Netherlands)

Dang, T.; Desens, J.; Franke, U.; Gavrila, D.; Schäfers, L.; Ziegler, W.; Eskandarian, A.

2012-01-01

Steering and evasion assistance defines a new and future class of driver assistance systems to avoid an impending collision with other traffic participants. Dynamic and kinematic considerations reveal that an evasive steering maneuver has high potential for collision avoidance in many driving

DYNALIGHT DESKTOP

DEFF Research Database (Denmark)

Mærsk-Møller, Hans Martin; Kjær, Katrine Heinsvig; Ottosen, Carl-Otto

2018-01-01

for energy and cost-efficient climate control strategies that do not compromise product quality. In this paper, we present a novel approach addressing dynamic control of supplemental light in greenhouses aiming to decrease electricity costs and energy consumption without loss in plant productivity. Our...... approach uses weather forecasts and electricity prices to compute energy and cost-efficient supplemental light plans, which fulfils the production goals of the grower. The approach is supported by a set of newly developed planning software, which interfaces with a greenhouse climate computer. The planning...... algorithm is based on a new plant physiological understanding that utilizes the natural plasticity in plants to irregular light periods. The results revealed that different light control strategies using three different set points of daily photosynthesis integral (DPI) compared to a control treatment...

Educating the Employee Assistance Professional: Cornell University's Employee Assistance Education and Research Program.

Science.gov (United States)

Quick, R. C.; And Others

1987-01-01

Outlines Cornell University's Employee Assistance Education and Research Program, which uses an academic curriculum and field experience to further develop the Employee Assistance Program (EAP) profession. Addresses the dilemma of personnel executives in ensuring quality in EAP programs and staff. (JOW)

ASSIST user manual

Science.gov (United States)

Johnson, Sally C.; Boerschlein, David P.

1995-01-01

Semi-Markov models can be used to analyze the reliability of virtually any fault-tolerant system. However, the process of delineating all the states and transitions in a complex system model can be devastatingly tedious and error prone. The Abstract Semi-Markov Specification Interface to the SURE Tool (ASSIST) computer program allows the user to describe the semi-Markov model in a high-level language. Instead of listing the individual model states, the user specifies the rules governing the behavior of the system, and these are used to generate the model automatically. A few statements in the abstract language can describe a very large, complex model. Because no assumptions are made about the system being modeled, ASSIST can be used to generate models describing the behavior of any system. The ASSIST program and its input language are described and illustrated by examples.

Desktop analysis of potential impacts of visitor use: a case study for the highest park in the Southern Hemisphere.

Science.gov (United States)

Barros, Agustina; Pickering, Catherine; Gudes, Ori

2015-03-01

Nature-based tourism and recreation activities have a range of environmental impacts, but most protected area agencies have limited capacity to assess them. To prioritise where and what impacts to monitor and manage, we conducted a desktop assessment using Geographical Information Systems (GIS) by combining recreation ecology research with data on visitor usage and key environmental features for a popular protected area used for mountaineering and trekking, Aconcagua Provincial Park (2400-6962 m a.s.l.) in the Andes of Argentina. First, we integrated visitor data from permits with environmental data using GIS. We then identified key impact indicators for different activities based on the recreation ecology literature. Finally, we integrated this data to identify likely ecological impacts based on the types of activities, amount of use and altitudinal zones. Visitors only used 2% of the Park, but use was concentrated in areas of high conservation value including in alpine meadows and glacier lakes. Impacts on water resources were likely to be concentrated in campsites from the intermediate to the nival/glacial zones of the Park while impacts on terrestrial biodiversity were likely to be more severe in the low and intermediate alpine zones (2400-3800 m a.s.l.). These results highlight how visitor data can be used to identify priority areas for on-ground assessment of impacts in key locations. Improvements to the management of visitors in this Park involves more effective ways of dealing with water extraction and human waste in high altitude campsites and the impacts of hikers and pack animals in the low and intermediate alpine zones. Copyright © 2014 Elsevier Ltd. All rights reserved.

3D Virtual CH Interactive Information Systems for a smart web browsing experience for desktop PCs and mobile devices

Directory of Open Access Journals (Sweden)

A. Scianna

2018-05-01

Full Text Available Recently, the diffusion of knowledge on Cultural Heritage (CH has become an element of primary importance for its valorization. At the same time, the diffusion of surveys based on UAV Unmanned Aerial Vehicles (UAV technologies and new methods of photogrammetric reconstruction have opened new possibilities for 3D CH representation. Furthermore the recent development of faster and more stable internet connections leads people to increase the use of mobile devices. In the light of all this, the importance of the development of Virtual Reality (VR environments applied to CH is strategic for the diffusion of knowledge in a smart solution. In particular, the present work shows how, starting from a basic survey and the further photogrammetric reconstruction of a cultural good, is possible to built a 3D CH interactive information system useful for desktop and mobile devices. For this experimentation the Arab-Norman church of the Trinity of Delia (in Castelvetrano-Sicily-Italy has been adopted as case study. The survey operations have been carried out considering different rapid methods of acquisition (UAV camera, SLR camera and smartphone camera. The web platform to publish the 3D information has been built using HTML5 markup language and WebGL JavaScript libraries (Three.js libraries. This work presents the construction of a 3D navigation system for a web-browsing of a virtual CH environment, with the integration of first person controls and 3D popup links. This contribution adds a further step to enrich the possibilities of open-source technologies applied to the world of CH valorization on web.

Animal-assisted intervention and social skills strengthening

OpenAIRE

Božič, Tjaša

2014-01-01

The diploma thesis describe animal-assisted interventions, more precisely, the significance of animal-assisted interventions for strengthening of social skills. Theoretical part includes a detailed presentation of the benefits of therapeutic dog in work with vulnerable populations. I focused on delimitation of the term animal-assisted interventions which includes animal-assisted therapy and animal-assisted activity and the differences and similarities between them. I continued with therapeuti...

48 CFR 47.105 - Transportation assistance.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Transportation assistance... MANAGEMENT TRANSPORTATION General 47.105 Transportation assistance. (a) Civilian Government activities that do not have transportation officers, or otherwise need assistance on transportation matters, shall...

13 CFR 301.7 - Investment Assistance proposal.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Investment Assistance proposal... COMMERCE ELIGIBILITY, INVESTMENT RATE AND PROPOSAL AND APPLICATION REQUIREMENTS Proposal and Application Requirements; Evaluation Criteria § 301.7 Investment Assistance proposal. (a) The EDA Investment Assistance...

44 CFR 206.141 - Disaster unemployment assistance.

Science.gov (United States)

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Disaster unemployment assistance. 206.141 Section 206.141 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY... § 206.141 Disaster unemployment assistance. The authority to implement the disaster unemployment...

21 CFR 884.6130 - Assisted reproduction microtools.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Assisted reproduction microtools. 884.6130 Section... (CONTINUED) MEDICAL DEVICES OBSTETRICAL AND GYNECOLOGICAL DEVICES Assisted Reproduction Devices § 884.6130 Assisted reproduction microtools. (a) Identification. Assisted reproduction microtools are pipettes or...

Our experience with implantation of VentrAssist left ventricular assist device

Directory of Open Access Journals (Sweden)

Hiriyur Shivalingappa Jayanthkumar

2013-01-01

Full Text Available Perioperative anaesthetic management of the VentrAssist TM left ventricular assist device (LVAD is a challenge for anaesthesiologists because patients presenting for this operation have long-standing cardiac failure and often have associated hepatic and renal impairment, which may significantly alter the pharmacokinetics of administered drugs and render the patients coagulopathic. The VentrAssist is implanted by midline sternotomy. A brief period of cardiopulmonary bypass (CPB for apical cannulation of left ventricle is needed. The centrifugal pump, which produces non-pulsatile, continuous flow, is positioned in the left sub-diaphragmatic pocket. This LVAD is preload dependent and afterload sensitive. Transoesophageal echocardiography is an essential tool to rule out contraindications and to ensure proper inflow cannula position, and following the implantation of LVAD, to ensure right ventricular (RV function. The anaesthesiologist should be prepared to manage cardiac decompensation and acute desaturation before initiation of CPB, as well as RV failure and severe coagulopathic bleeding after CPB. Three patients had undergone implantation of VentrAssist in our hospital. This pump provides flow of 5 l/min depending on preload, afterload and pump speed. All the patients were discharged after an average of 30 days. There was no perioperative mortality.

30 CFR 795.11 - Assistance funding.

Science.gov (United States)

2010-07-01

... Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SMALL OPERATOR ASSISTANCE PERMANENT REGULATORY PROGRAM-SMALL OPERATOR ASSISTANCE PROGRAM § 795.11 Assistance... eligible small operators if available funds are less than those required to provide the services pursuant...

Articulation Matrix for Home Health Aide, Nursing Assistant, Patient Care Assistant, Practical Nursing.

Science.gov (United States)

Florida State Univ., Tallahassee. Center for Instructional Development and Services.

This document demonstrates the relationships among four Florida nursing education programs (home health aide, nursing assistant, patient care assistant, and practical nursing) by listing student performance standards and indicating which ones are required in each program. The 268 student performance standards are arranged in 23 areas of…

Computer-assisted radiology

International Nuclear Information System (INIS)

Lemke, H.U.

1988-01-01

New digital imaging modalities and more sophisticated image processing systems will have a profound effect on those areas of medicine concerned with imaging. This mainly means computer-assisted radiology (CAR) and implies a transition from analog film systems to digital imaging systems, integration of digital imaging modalities through picture archiving and communication systems (PACS) and the graduated employment of image-oriented medical work stations (MWS) for computer-assisted representation, communication, diagnosis, and therapy planning. (orig.) [de

Navigating "Assisted Dying".

Science.gov (United States)

Schipper, Harvey

2016-02-01

Carter is a bellwether decision, an adjudication on a narrow point of law whose implications are vast across society, and whose impact may not be realized for years. Coupled with Quebec's Act Respecting End-of-life Care it has sharply changed the legal landscape with respect to actively ending a person's life. "Medically assisted dying" will be permitted under circumstances, and through processes, which have yet to be operationally defined. This decision carries with it moral assumptions, which mean that it will be difficult to reach a unifying consensus. For some, the decision and Act reflect a modern acknowledgement of individual autonomy. For others, allowing such acts is morally unspeakable. Having opened the Pandora's Box, the question becomes one of navigating a tolerable societal path. I believe it is possible to achieve a workable solution based on the core principle that "medically assisted dying" should be a very rarely employed last option, subject to transparent ongoing review, specifically as to why it was deemed necessary. My analysis is based on 1. The societal conditions in which have fostered demand for "assisted dying", 2. Actions in other jurisdictions, 3. Carter and Quebec Bill 52, 4. Political considerations, 5. Current medical practice. Leading to a series of recommendations regarding. 1. Legislation and regulation, 2. The role of professional regulatory agencies, 3. Medical professions education and practice, 4. Public education, 5. Health care delivery and palliative care. Given the burden of public opinion, and the legal steps already taken, a process for assisted-dying is required. However, those legal and regulatory steps should only be considered a necessary and defensive first step in a two stage process. The larger goal, the second step, is to drive the improvement of care, and thus minimize assisted-dying.

44 CFR 300.3 - Financial assistance.

Science.gov (United States)

2010-10-01

... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false Financial assistance. 300.3 Section 300.3 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT AGENCY, DEPARTMENT OF... responsibilities for IFG, crisis counseling, mass care or other functional responsibilities; (7) Training for State...

Executive Assistant - Technology and Innovation | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

Job Summary Under the direction of the Director, the Director's Assistant provides operational and administrative assistance to the Director, performs a variety of administrative, research, coordinating and logistical services in support of the operations of the Director's office and assists with information management functions ...

Robotic assisted andrological surgery

Science.gov (United States)

Parekattil, Sijo J; Gudeloglu, Ahmet

2013-01-01

The introduction of the operative microscope for andrological surgery in the 1970s provided enhanced magnification and accuracy, unparalleled to any previous visual loop or magnification techniques. This technology revolutionized techniques for microsurgery in andrology. Today, we may be on the verge of a second such revolution by the incorporation of robotic assisted platforms for microsurgery in andrology. Robotic assisted microsurgery is being utilized to a greater degree in andrology and a number of other microsurgical fields, such as ophthalmology, hand surgery, plastics and reconstructive surgery. The potential advantages of robotic assisted platforms include elimination of tremor, improved stability, surgeon ergonomics, scalability of motion, multi-input visual interphases with up to three simultaneous visual views, enhanced magnification, and the ability to manipulate three surgical instruments and cameras simultaneously. This review paper begins with the historical development of robotic microsurgery. It then provides an in-depth presentation of the technique and outcomes of common robotic microsurgical andrological procedures, such as vasectomy reversal, subinguinal varicocelectomy, targeted spermatic cord denervation (for chronic orchialgia) and robotic assisted microsurgical testicular sperm extraction (microTESE). PMID:23241637

Performance Evaluation Methods for Assistive Robotic Technology

Science.gov (United States)

Tsui, Katherine M.; Feil-Seifer, David J.; Matarić, Maja J.; Yanco, Holly A.

Robots have been developed for several assistive technology domains, including intervention for Autism Spectrum Disorders, eldercare, and post-stroke rehabilitation. Assistive robots have also been used to promote independent living through the use of devices such as intelligent wheelchairs, assistive robotic arms, and external limb prostheses. Work in the broad field of assistive robotic technology can be divided into two major research phases: technology development, in which new devices, software, and interfaces are created; and clinical, in which assistive technology is applied to a given end-user population. Moving from technology development towards clinical applications is a significant challenge. Developing performance metrics for assistive robots poses a related set of challenges. In this paper, we survey several areas of assistive robotic technology in order to derive and demonstrate domain-specific means for evaluating the performance of such systems. We also present two case studies of applied performance measures and a discussion regarding the ubiquity of functional performance measures across the sampled domains. Finally, we present guidelines for incorporating human performance metrics into end-user evaluations of assistive robotic technologies.

Preparing for Assisted Reproductive Technology

Science.gov (United States)

... CDC Cancel Submit Search The CDC Assisted Reproductive Technology (ART) Note: Javascript is disabled or is not ... visit this page: About CDC.gov . Assisted Reproductive Technology (ART) What Is ART Patient Resources Preparing for ...

25 CFR 41.10 - Technical assistance.

Science.gov (United States)

2010-04-01

... Community College's request in writing. In any case, where the type and source of technical assistance is... for technical assistance under this section shall be made in writing and sent to the applicant within... 25 Indians 1 2010-04-01 2010-04-01 false Technical assistance. 41.10 Section 41.10 Indians BUREAU...

Psychological Assistance and Violence against Women

Directory of Open Access Journals (Sweden)

Heloisa Hanada

2010-01-01

Full Text Available The aim of this research was to identify and analyze the insertion of psychologists into the network of services assisting violence against women. Interviews with psychologists working for specific services in Greater Sao Paulo (police, health, psychosocial assistance, shelter, basic assistance were analyzed. Psychologists are present and their work is requested in all types of services. Their work consists in training and supervising other professionals, as well as assisting women. There is a great diversity of practices, with frequent adjustment of the interventions to the objectives, institutional culture and assistance vocation of the services. There is a relative impreciseness in the psychologists’ work, and this can stand as a barrier to better team and network integration. However, it can also create opportunities for innovations in practices.

Limited Evidence for Robot-assisted Surgery

DEFF Research Database (Denmark)

Broholm, Malene; Onsberg Hansen, Iben; Rosenberg, Jacob

2016-01-01

-assisted surgery. Open versus robot-assisted surgery was investigated in 3 studies. A lower blood loss and a longer operative time were found after robot-assisted surgery. No other difference was detected. CONCLUSIONS: At this point there is not enough evidence to support the significantly higher costs......PURPOSE: To evaluate available evidence on robot-assisted surgery compared with open and laparoscopic surgery. METHOD: The databases Medline, Embase, and Cochrane Library were systematically searched for randomized controlled trials comparing robot-assisted surgery with open and laparoscopic...... surgery regardless of surgical procedure. Meta-analyses were performed on each outcome with appropriate data material available. Cochrane Collaboration's tool for assessing risk of bias was used to evaluate risk of bias on a study level. The GRADE approach was used to evaluate the quality of evidence...

Foreign assistance

International Nuclear Information System (INIS)

1991-07-01

This paper reports that providing energy assistance to developing countries remains a relatively low priority of the Agency for International Development. AID is helping some developing countries meet their energy needs, but this assistance varies substantially because of the agency's decentralized structure. Most AID energy funding has gone to a handful of countries-primarily Egypt and Pakistan. With limited funding in most other countries, AID concentrates on providing technical expertise and promoting energy policy reforms that will encourage both energy efficiency and leverage investment by the private sector and other donors. Although a 1989 congressional directive to pursue a global warming initiative has had a marginal impact on the agency's energy programming, many AID energy programs, including those directed at energy conservation, help address global warming concerns

Arranging for personal assistance services and assistive technology at work. A report of the rehabilitation research and training center on personal assistance services.

Science.gov (United States)

Stoddard, Susan; Kraus, Lewis

2006-01-01

For an employee with a disability, reasonable accommodation can make the difference in finding work, maintaining employment, and succeeding on the job. Today, employers and employees alike are more aware that appropriate accommodation, including workplace personal assistance services (PAS) as well as assistive technology, improves an employee's ability to succeed. While assistive technology is in widespread use as an accommodation, workplace personal assistance is less understood. The goal of the study was to learn more about how workplace PAS and AT are arranged for in the workplace, and the issues that arise. Structured phone interviews were conducted with 20 workplace PAS users, 21 employers familiar with workplace PAS, and 19 employment organizations. Interview transcripts are the basis for the qualitative analysis of findings. Requirements for personal assistance accommodations focus on task-related needs. Personal care needs at work are not included in the Americans with Disabilities act but may be needed by the employee. Employers and PAS users have developed many creative ways to address PAS need. Organizations can construct an approach that fits the needs, abilities, and constraints of each organization. The interview respondents have identified a number of practices that are succeeding, including establishment of policies for arranging for PAS; centralization of accommodation budgets to remove work unit disincentives; and providing a shared personal assistant for interpreting or for task-related and personal care tasks. A number of important research questions remain. What is the extent of the need for PAS in the workplace? Will an expanded PAS supply increase the employment opportunities for people with disabilities? Will better models of workplace PAS be adopted by employers?

Declarations on euthanasia and assisted dying.

Science.gov (United States)

Inbadas, Hamilton; Zaman, Shahaduz; Whitelaw, Sandy; Clark, David

2017-10-01

Declarations on end-of-life issues are advocacy interventions that seek to influence policy, raise awareness and call others to action. Despite increasing prominence, they have attracted little attention from researchers. This study tracks the emergence, content, and purpose of declarations concerned with assisted dying and euthanasia, in the global context. The authors identified 62 assisted dying/euthanasia declarations covering 1974-2016 and analyzed them for originating organization, geographic scope, format, and stated viewpoint on assisted dying/euthanasia. The declarations emerged from diverse organizational settings and became more frequent over time. Most opposed assisted dying/euthanasia.

Declarations on euthanasia and assisted dying

Science.gov (United States)

Inbadas, Hamilton; Zaman, Shahaduz; Whitelaw, Sandy; Clark, David

2017-01-01

ABSTRACT Declarations on end-of-life issues are advocacy interventions that seek to influence policy, raise awareness and call others to action. Despite increasing prominence, they have attracted little attention from researchers. This study tracks the emergence, content, and purpose of declarations concerned with assisted dying and euthanasia, in the global context. The authors identified 62 assisted dying/euthanasia declarations covering 1974–2016 and analyzed them for originating organization, geographic scope, format, and stated viewpoint on assisted dying/euthanasia. The declarations emerged from diverse organizational settings and became more frequent over time. Most opposed assisted dying/euthanasia. PMID:28398131

Implementation Issues of Virtual Desktop Infrastructure and Its Case Study for a Physician's Round at Seoul National University Bundang Hospital.

Science.gov (United States)

Yoo, Sooyoung; Kim, Seok; Kim, Taegi; Kim, Jon Soo; Baek, Rong-Min; Suh, Chang Suk; Chung, Chin Youb; Hwang, Hee

2012-12-01

The cloud computing-based virtual desktop infrastructure (VDI) allows access to computing environments with no limitations in terms of time or place such that it can permit the rapid establishment of a mobile hospital environment. The objective of this study was to investigate the empirical issues to be considered when establishing a virtual mobile environment using VDI technology in a hospital setting and to examine the utility of the technology with an Apple iPad during a physician's rounds as a case study. Empirical implementation issues were derived from a 910-bed tertiary national university hospital that recently launched a VDI system. During the physicians' rounds, we surveyed patient satisfaction levels with the VDI-based mobile consultation service with the iPad and the relationship between these levels of satisfaction and hospital revisits, hospital recommendations, and the hospital brand image. Thirty-five inpatients (including their next-of-kin) and seven physicians participated in the survey. Implementation issues pertaining to the VDI system arose with regard to the highly availability system architecture, wireless network infrastructure, and screen resolution of the system. Other issues were related to privacy and security, mobile device management, and user education. When the system was used in rounds, patients and their next-of-kin expressed high satisfaction levels, and a positive relationship was noted as regards patients' decisions to revisit the hospital and whether the use of the VDI system improved the brand image of the hospital. Mobile hospital environments have the potential to benefit both physicians and patients. The issues related to the implementation of VDI system discussed here should be examined in advance for its successful adoption and implementation.

Religious aspects of assisted reproduction

Science.gov (United States)

Sallam, H N; Sallam, N H

2016-03-28

Human response to new developments regarding birth, death, marriage and divorce is largely shaped by religious beliefs. When assisted reproduction was introduced into medical practice in the last quarter of the twentieth century, it was fiercely attacked by some religious groups and highly welcomed by others. Today, assisted reproduction is accepted in nearly all its forms by Judaism, Hinduism and Buddhism, although most Orthodox Jews refuse third party involvement. On the contrary assisted reproduction is totally unacceptable to Roman Catholicism, while Protestants, Anglicans, Coptic Christians and Sunni Muslims accept most of its forms, which do not involve gamete or embryo donation. Orthodox Christians are less strict than Catholic Christians but still refuse third party involvement. Interestingly, in contrast to Sunni Islam, Shi'a Islam accepts gamete donation and has made provisions to institutionalize it. Chinese culture is strongly influenced by Confucianism, which accepts all forms of assisted reproduction that do not involve third parties. Other communities follow the law of the land, which is usually dictated by the religious group(s) that make(s) the majority of that specific community. The debate will certainly continue as long as new developments arise in the ever-evolving field of assisted reproduction.

Transcanalicular laser-assisted dacryocystorhinostomy.

Science.gov (United States)

Rosen, N; Barak, A; Rosner, M

1997-09-01

Current techniques of laser-assisted dacryocystorhinostomy are mostly endonasal. In this report, the authors describe their technique of laser-assisted dacryocystorhinostomy performed through the canaliculi and the surgical results they achieved. Fourteen patients with nasolacrimal duct obstruction underwent transcanalicular laser-assisted dacryocystorhinostomy. The bony ostium was perforated using a fiber optic-transmitting, giant-pulse Nd:YAG laser, with an energy of 0.5 to 4 J per pulse. The total energy used to create an ostium was 18 to 34 J. A silicone tube was inserted through the canaliculi and the ostium into the nasal cavity and kept in place for 5 to 7 months. Patients were observed for 18 to 22 months. Nine of the 14 patients (64%) reported the disappearance of epiphora following surgery. In 3 patients, no relief of epiphora was obtained. In 1 patient the operation was not completed because of severe nasal bleeding. In another, tearing began 12 months after surgery (6 months after tube removal). Transcanalicular laser-assisted dacryocystorhinostomy is a potentially useful method for performing dacryocystorhinostomy. Technical modifications and improvements are needed to increase the success rate.

20 CFR 625.7 - Disaster Unemployment Assistance: Duration.

Science.gov (United States)

2010-04-01

... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Disaster Unemployment Assistance: Duration... DISASTER UNEMPLOYMENT ASSISTANCE § 625.7 Disaster Unemployment Assistance: Duration. DUA shall be payable... unemployment which begin during a Disaster Assistance Period. ...

Telephone-Directory Program

Science.gov (United States)

Vlahos, William

2005-01-01

eDirectory is a computer program that makes it possible to view entries in the Jet Propulsion Laboratory (JPL) telephone directory by use of PalmPilot(TradeMark) (or equivalent) personal digital assistants. When one uses eDirectory, a single click causes the downloading of a current copy of the directory (which is updated nightly) from a server. The downloaded directory data can be sorted and searched. The program can append a "JPL" category and save directory information in a file that can be imported into the Palm Desktop(TradeMark) software.

Use, misuse and non-use of health care assistants: understanding the work of health care assistants in a hospital setting.

Science.gov (United States)

Spilsbury, Karen; Meyer, Julienne

2004-11-01

This study is concerned with understanding the work of non-registered nurses (health care assistants) in a UK hospital setting. There are increasing numbers of health care assistants employed by the National Health Service in the UK to support registered nurses providing nursing care. However, little is known about the make-up of the health care assistant workforce and the changing nature of their role. This study addresses some of these gaps in the research-based literature. A single case study design using mixed methods (survey, interviews, participant observations, focus groups and documents) was used to generate an in-depth account of health care assistants' work in one organization. The study is built upon what health care assistants say they do, compared with what they actually do in practice. It explores how and whether the work of health care assistants is adequately supervised, tensions between the work of health care assistants and registered nurses and the subsequent effects on teamwork and patient care. There are policy expectations associated with the work of health care assistants. However, this study reveals significant deviations from these goals. The workplace arena and the negotiations between health care assistants and registered nurses that take place within it, actively shape the health care assistants' work. Findings suggest dynamic patterns of use, misuse and non-use of the health care assistants as a resource to patient care. The changing roles of registered nurses have direct implications for the roles of health care assistants: as registered nurses take on extra duties and responsibilities they are conceding some of their role to health care assistants. This has implications for nurse managers. The competence of health care assistants to carry out nursing work needs to be reassessed and there also needs to be ongoing monitoring and supervision of their work to maximize, and further develop, their contribution to patient care and to ensure

COMPUTER-ASSISTED ACCOUNTING

Directory of Open Access Journals (Sweden)

SORIN-CIPRIAN TEIUŞAN

2009-01-01

Full Text Available What is computer-assisted accounting? Where is the place and what is the role of the computer in the financial-accounting activity? What is the position and importance of the computer in the accountant’s activity? All these are questions that require scientific research in order to find the answers. The paper approaches the issue of the support granted to the accountant to organize and manage the accounting activity by the computer. Starting from the notions of accounting and computer, the concept of computer-assisted accounting is introduced, it has a general character and it refers to the accounting performed with the help of the computer or using the computer to automate the procedures performed by the person who is doing the accounting activity; this is a concept used to define the computer applications of the accounting activity. The arguments regarding the use of the computer to assist accounting targets the accounting informatization, the automating of the financial-accounting activities and the endowment with modern technology of the contemporary accounting.

New developments in employee assistance programs.

Science.gov (United States)

White, R K; McDuff, D R; Schwartz, R P; Tiegel, S A; Judge, C P

1996-04-01

Employee assistance programs have developed from alcoholism assessment and referral centers to specialized behavioral health programs. Comprehensive employee assistance programs are defined by six major components: identification of problems based on job performance, consultation with supervisors, constructive confrontation, evaluation and referral, liaison with treatment providers, and substance abuse expertise. Other services have been added as enhancements to the basic model and include managed behavioral health activities and professional assistance committees, which provide services for impaired professionals and executives. Recent developments in the field are illustrated through examples from the experience of the employee assistance program at the University of Maryland Medical System in Baltimore.

[Robot-assisted pancreatic resection].

Science.gov (United States)

Müssle, B; Distler, M; Weitz, J; Welsch, T

2017-06-01

Although robot-assisted pancreatic surgery has been considered critically in the past, it is nowadays an established standard technique in some centers, for distal pancreatectomy and pancreatic head resection. Compared with the laparoscopic approach, the use of robot-assisted surgery seems to be advantageous for acquiring the skills for pancreatic, bile duct and vascular anastomoses during pancreatic head resection and total pancreatectomy. On the other hand, the use of the robot is associated with increased costs and only highly effective and professional robotic programs in centers for pancreatic surgery will achieve top surgical and oncological quality, acceptable operation times and a reduction in duration of hospital stay. Moreover, new technologies, such as intraoperative fluorescence guidance and augmented reality will define additional indications for robot-assisted pancreatic surgery.

[Neurally adjusted ventilatory assist (NAVA). A new mode of assisted mechanical ventilation].

Science.gov (United States)

Moerer, O; Barwing, J; Quintel, M

2008-10-01

The aim of mechanical ventilation is to assure gas exchange while efficiently unloading the respiratory muscles and mechanical ventilation is an integral part of the care of patients with acute respiratory failure. Modern lung protective strategies of mechanical ventilation include low-tidal-volume ventilation and the continuation of spontaneous breathing which has been shown to be beneficial in reducing atelectasis and improving oxygenation. Poor patient-ventilator interaction is a major issue during conventional assisted ventilation. Neurally adjusted ventilator assist (NAVA) is a new mode of mechanical ventilation that uses the electrical activity of the diaphragm (EAdi) to control the ventilator. First experimental studies showed an improved patient-ventilator synchrony and an efficient unloading of the respiratory muscles. Future clinical studies will have to show that NAVA is of clinical advantage when compared to conventional modes of assisted mechanical ventilation. This review characterizes NAVA according to current publications on this topic.

7 CFR 610.4 - Technical assistance furnished.

Science.gov (United States)

2010-01-01

... consultants who provide services such as engineering, planning, environmental assessment, tax assessment, and... of program assistance, planning assistance, application of conservation practices, and assistance in...) County and other local government units such as park authorities, departments of public works, planning...

24 CFR 982.451 - Housing assistance payments contract.

Science.gov (United States)

2010-04-01

... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Housing assistance payments... URBAN DEVELOPMENT SECTION 8 TENANT BASED ASSISTANCE: HOUSING CHOICE VOUCHER PROGRAM Housing Assistance Payments Contract and Owner Responsibility § 982.451 Housing assistance payments contract. (a)(1) The HAP...

38 CFR 21.5290 - Educational Assistance Pilot Program.

Science.gov (United States)

2010-07-01

... Pilot Program. 21.5290 Section 21.5290 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS... Assistance Under 38 U.S.C. Chapter 32 Educational Assistance Pilot Program § 21.5290 Educational Assistance Pilot Program. (a) Purpose. The Educational Assistance Pilot Program is designed to encourage...

21 CFR 884.6200 - Assisted reproduction laser system.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Assisted reproduction laser system. 884.6200... (CONTINUED) MEDICAL DEVICES OBSTETRICAL AND GYNECOLOGICAL DEVICES Assisted Reproduction Devices § 884.6200 Assisted reproduction laser system. (a) Identification. The assisted reproduction laser system is a device...

7 CFR 1421.104 - Marketing assistance loan making.

Science.gov (United States)

2010-01-01

... cost for terminating the financing statement for marketing assistance loans disbursed under paragraph... 7 Agriculture 10 2010-01-01 2010-01-01 false Marketing assistance loan making. 1421.104 Section... COMMODITIES-MARKETING ASSISTANCE LOANS AND LOAN DEFICIENCY PAYMENTS FOR 2008 THROUGH 2012 Marketing Assistance...

Religious aspects of assisted reproduction

Science.gov (United States)

Sallam, HN; Sallam, NH

2016-01-01

Abstract Human response to new developments regarding birth, death, marriage and divorce is largely shaped by religious beliefs. When assisted reproduction was introduced into medical practice in the last quarter of the twentieth century, it was fiercely attacked by some religious groups and highly welcomed by others. Today, assisted reproduction is accepted in nearly all its forms by Judaism, Hinduism and Buddhism, although most Orthodox Jews refuse third party involvement. On the contrary assisted reproduction is totally unacceptable to Roman Catholicism, while Protestants, Anglicans, Coptic Christians and Sunni Muslims accept most of its forms, which do not involve gamete or embryo donation. Orthodox Christians are less strict than Catholic Christians but still refuse third party involvement. Interestingly, in contrast to Sunni Islam, Shi’a Islam accepts gamete donation and has made provisions to institutionalize it. Chinese culture is strongly influenced by Confucianism, which accepts all forms of assisted reproduction that do not involve third parties. Other communities follow the law of the land, which is usually dictated by the religious group(s) that make(s) the majority of that specific community. The debate will certainly continue as long as new developments arise in the ever-evolving field of assisted reproduction. PMID:27822349

78 FR 26559 - Homeless Emergency Assistance and Rapid Transition to Housing: Rural Housing Stability Assistance...

Science.gov (United States)

2013-05-07

... Homeless Emergency Assistance and Rapid Transition to Housing: Rural Housing Stability Assistance Program and Revisions to the Definition of ``Chronically Homeless'' Extension of Public Comment Only for Rural... proposed revisions to the definition of ``chronically homeless.'' This document announces that HUD is...

Daily Public Assistance Grants Award Activity

Data.gov (United States)

Department of Homeland Security — Daily activity of Public Assistance Grant Awards, including FEMA Region, State, Disaster Declaration Number, Event description, Mission Assigned agency, Assistance...

Knowledge assistant for robotic environmental characterization

International Nuclear Information System (INIS)

Feddema, J.; Rivera, J.; Tucker, S.; Matek, J.

1996-08-01

A prototype sensor fusion framework called the open-quotes Knowledge Assistantclose quotes has been developed and tested on a gantry robot at Sandia National Laboratories. This Knowledge Assistant guides the robot operator during the planning, execution, and post analysis stages of the characterization process. During the planning stage, the Knowledge Assistant suggests robot paths and speeds based on knowledge of sensors available and their physical characteristics. During execution, the Knowledge Assistant coordinates the collection of data through a data acquisition open-quotes specialist.close quotes During execution and postanalysis, the Knowledge Assistant sends raw data to other open-quotes specialists,close quotes which include statistical pattern recognition software, a neural network, and model-based search software. After the specialists return their results, the Knowledge Assistant consolidates the information and returns a report to the robot control system where the sensed objects and their attributes (e.g., estimated dimensions, weight, material composition, etc.) are displayed in the world model. This report highlights the major components of this system

10 CFR 420.3 - Administration of financial assistance.

Science.gov (United States)

2010-01-01

... procedures which DOE may from time to time prescribe for the administration of financial assistance under... 10 Energy 3 2010-01-01 2010-01-01 false Administration of financial assistance. 420.3 Section 420... Energy Program Financial Assistance § 420.3 Administration of financial assistance. (a) Financial...

Ergonomic analysis of primary and assistant surgical roles.

Science.gov (United States)

Zihni, Ahmed M; Cavallo, Jaime A; Ray, Shuddhadeb; Ohu, Ikechukwu; Cho, Sohyung; Awad, Michael M

2016-06-15

Laparoscopic surgery is associated with a high degree of ergonomic stress. However, the stress associated with surgical assisting is not known. In this study, we compare the ergonomic stress associated with primary and assistant surgical roles during laparoscopic surgery. We hypothesize that higher ergonomic stress will be detected in the primary operating surgeon when compared with the surgical assistant. One right-hand dominant attending surgeon performed 698 min of laparoscopic surgery over 13 procedures (222 min primary and 476 min assisting), whereas electromyography data were collected from bilateral biceps, triceps, deltoids, and trapezius muscles. Data were analyzed in 1-min segments. Average muscle activation as quantified by maximal voluntary contraction (%MVC) was calculated for each muscle group during primary surgery and assisting. We compared mean %MVC values with unpaired t-tests. Activation of right (R) biceps and triceps muscle groups is significantly elevated while operating when compared with assisting (R biceps primary: 5.47 ± 0.21 %MVC, assistant: 3.93 ± 0.11, P ergonomic differences between operating and assisting. Surgical assisting was associated with similar and occasionally higher levels of muscle activation compared with primary operating. These findings suggest that surgical assistants face significant ergonomic stress, just as operating surgeons do. Steps must be taken to recognize and mitigate this stress in both operating surgeons and assistants. Copyright © 2016 Elsevier Inc. All rights reserved.

Desk to the Desktop--Digital Reference Service Leveraging Educational Assistance in Distance Learning: Implications for Jamaica

Science.gov (United States)

Nicholas, Pauline

2010-01-01

The Internet and the World Wide Web have influenced the new approaches taken in teaching and learning at institutions of higher learning. The nature of the courses offered, the geographical spread of the teaching sites as well as the diverse and distributed student population are the catalysts for the changes. These non-traditional, or distant…

Intelligent Tools and Instructional Simulations

National Research Council Canada - National Science Library

Murray, William R; Sams, Michelle; Belleville, Michael

2001-01-01

... desktop applications. The Desktop Associate is a multiagent system that couples a pedagogical agent with a monitoring agent to help users with desktop applications such as spreadsheet programs, word processors, and Internet browsers...

Surgical Residents are Excluded From Robot-assisted Surgery

DEFF Research Database (Denmark)

Broholm, Malene; Rosenberg, Jacob

2015-01-01

PURPOSE: Implementation of a robotic system may influence surgical training. The aim was to report the charge of the operating surgeon and the bedside assistant at robot-assisted procedures in urology, gynecology, and colorectal surgery. MATERIALS AND METHODS: A review of hospital charts from...... performed. In 10 (1.3%) of these procedures, a resident attended as bedside assistant and never as operating surgeon in the console. CONCLUSIONS: Our results demonstrate a severe problem with surgical education. Robot-assisted surgery is increasingly used; however, robotic surgical training during residency...... surgical procedures during a 1-year period from October 2013 to October 2014. All robot-assisted urologic, gynecologic, and colorectal procedures were identified. Charge of both operating surgeon in the console and bedside assistant were registered. RESULTS: A total of 774 robot-assisted procedures were...

Metal-assisted etch combined with regularizing etch

Energy Technology Data Exchange (ETDEWEB)

Yim, Joanne; Miller, Jeff; Jura, Michael; Black, Marcie R.; Forziati, Joanne; Murphy, Brian; Magliozzi, Lauren

2018-03-06

In an aspect of the disclosure, a process for forming nanostructuring on a silicon-containing substrate is provided. The process comprises (a) performing metal-assisted chemical etching on the substrate, (b) performing a clean, including partial or total removal of the metal used to assist the chemical etch, and (c) performing an isotropic or substantially isotropic chemical etch subsequently to the metal-assisted chemical etch of step (a). In an alternative aspect of the disclosure, the process comprises (a) performing metal-assisted chemical etching on the substrate, (b) cleaning the substrate, including removal of some or all of the assisting metal, and (c) performing a chemical etch which results in regularized openings in the silicon substrate.

Receiving Assistance and Local Food System Participation

Directory of Open Access Journals (Sweden)

Rebecca L. Som Castellano

2017-02-01

Full Text Available A body of literature has noted that local food systems (LFSs may not involve active participation by individuals with lower incomes. This is, in part, a function of racial and class hegemony, as well as physical and financial accessibility of LFSs. LFS institutions, such as farmers’ markets, have been working to facilitate receipt of food assistance programs, such as the Supplemental Nutrition Assistance Program (SNAP. Charitable assistance programs, such as food banks, have also been actively working to engage in LFSs, for example, by making local foods available. However, little research has explored the role that receiving public or charitable assistance can play in influencing LFS participation. In this article, I utilize quantitative and qualitative data collected from across the state of Ohio to examine the relationship between receiving assistance and LFS participation for women, who remain predominately responsible for food provisioning in the U.S., including among those who participate in LFSs. Quantitative results suggest that receiving assistance can increase participation in LFSs. Qualitative data provides more nuanced information about the importance of food assistance for women who want to participate in LFSs, and suggest that it is essential that food cooperatives and farmers’ markets are equipped to receive food assistance programs, such as SNAP, in order for women with lower incomes to participate in LFSs.

Plasma ``anti-assistance'' and ``self-assistance'' to high power impulse magnetron sputtering

Science.gov (United States)

Anders, André; Yushkov, Georgy Yu.

2009-04-01

A plasma assistance system was investigated with the goal to operate high power impulse magnetron sputtering (HiPIMS) at lower pressure than usual, thereby to enhance the utilization of the ballistic atoms and ions with high kinetic energy in the film growth process. Gas plasma flow from a constricted plasma source was aimed at the magnetron target. Contrary to initial expectations, such plasma assistance turned out to be contraproductive because it led to the extinction of the magnetron discharge. The effect can be explained by gas rarefaction. A better method of reducing the necessary gas pressure is operation at relatively high pulse repetition rates where the afterglow plasma of one pulse assists in the development of the next pulse. Here we show that this method, known from medium-frequency (MF) pulsed sputtering, is also very important at the much lower pulse repetition rates of HiPIMS. A minimum in the possible operational pressure is found in the frequency region between HiPIMS and MF pulsed sputtering.

Plasma 'anti-assistance' and 'self-assistance' to high power impulse magnetron sputtering

International Nuclear Information System (INIS)

Anders, Andre; Yushkov, Georgy Yu.

2009-01-01

A plasma assistance system was investigated with the goal to operate high power impulse magnetron sputtering (HiPIMS) at lower pressure than usual, thereby to enhance the utilization of the ballistic atoms and ions with high kinetic energy in the film growth process. Gas plasma flow from a constricted plasma source was aimed at the magnetron target. Contrary to initial expectations, such plasma assistance turned out to be contraproductive because it led to the extinction of the magnetron discharge. The effect can be explained by gas rarefaction. A better method of reducing the necessary gas pressure is operation at relatively high pulse repetition rates where the afterglow plasma of one pulse assists in the development of the next pulse. Here we show that this method, known from medium-frequency (MF) pulsed sputtering, is also very important at the much lower pulse repetition rates of HiPIMS. A minimum in the possible operational pressure is found in the frequency region between HiPIMS and MF pulsed sputtering

Client-Centered Employee Assistance Services.

Science.gov (United States)

Bayer, Darryl Lee

This paper addresses delivery aspects and benefits of client-centered Employee Assistance Program (EAP) services through a review of the literature and research. EAP services are described as educational and mental health services utilized to assist employees and their families to respond constructively to job, personal, interpersonal or…

An Assistive Technology Design Framework for ADHD

DEFF Research Database (Denmark)

Sonne, Tobias; Marshall, Paul; Obel, Carsten

2016-01-01

In this paper, we present a design framework for ADHD assistive technologies that aims to give researchers grounding in the background research on the condition, to provide a lingua franca, and to highlight potential research directions for HCI researchers within assistive technology. The design ...... map existing assistive technologies and potential new research efforts to the framework concepts. This way we show how it is used to support and advance the research and development of novel assistive technologies for the ADHD domain....

Assistance Focus: Latin America/Caribbean (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2015-01-01

The Clean Energy Solutions Center Ask an Expert service connects governments seeking policy information and advice with one of more than 30 global policy experts who can provide reliable and unbiased quick-response advice and information. The service is available at no cost to government agency representatives from any country and the technical institutes assisting them. This publication presents summaries of assistance provided to African governments, including the benefits of that assistance.

10 CFR 26.35 - Employee assistance programs.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Employee assistance programs. 26.35 Section 26.35 Energy NUCLEAR REGULATORY COMMISSION FITNESS FOR DUTY PROGRAMS Program Elements § 26.35 Employee assistance... to safely and competently perform their duties. Employee assistance programs must be designed to...

Outline of the Desktop Severe Accident Graphic Simulator Module for OPR-1000

International Nuclear Information System (INIS)

Park, S. Y.; Ahn, K. I.

2015-01-01

This paper introduce the desktop severe accident graphic simulator module (VMAAP) which is a window-based severe accident simulator using MAAP as its engine. The VMAAP is one of the submodules in SAMEX system (Severe Accident Management Support Expert System) which is a decision support system for use in a severe accident management following an incident at a nuclear power plant. The SAMEX system consists of four major modules as sub-systems: (a) Severe accident risk data base module (SARDB): stores the data of integrated severe accident analysis code results like MAAP and MELCOR for hundreds of high frequency scenarios for the reference plant; (b) Risk-informed severe accident risk data base management module (RI-SARD): provides a platform to identify the initiating event, determine plant status and equipment availability, diagnoses the status of the reactor core, reactor vessel and containment building, and predicts the plant behaviors; (c) Severe accident management simulator module (VMAAP): runs the MAAP4 code with user friendly graphic interface for input deck and output display; (d) On-line severe accident management guidance module (On-line SAMG); provides available accident management strategies with an electronic format. The role of VMAAP in SAMEX can be described as followings. SARDB contains the most of high frequency scenarios based on a level 2 probabilistic safety analysis. Therefore, there is good chance that a real accident sequence is similar to one of the data base cases. In such a case, RI-SARD can predict an accident progression by a scenario-base or symptom-base search depends on the available plant parameter information. Nevertheless, there still may be deviations or variations between the actual scenario and the data base scenario. The deviations can be decreased by using a real-time graphic accident simulator, VMAAP.. VMAAP is a MAAP4-based severe accident simulation model for OPR-1000 plant. It can simulate spectrum of physical processes

Outline of the Desktop Severe Accident Graphic Simulator Module for OPR-1000

Energy Technology Data Exchange (ETDEWEB)

Park, S. Y.; Ahn, K. I. [KAERI, Daejeon (Korea, Republic of)

2015-05-15

This paper introduce the desktop severe accident graphic simulator module (VMAAP) which is a window-based severe accident simulator using MAAP as its engine. The VMAAP is one of the submodules in SAMEX system (Severe Accident Management Support Expert System) which is a decision support system for use in a severe accident management following an incident at a nuclear power plant. The SAMEX system consists of four major modules as sub-systems: (a) Severe accident risk data base module (SARDB): stores the data of integrated severe accident analysis code results like MAAP and MELCOR for hundreds of high frequency scenarios for the reference plant; (b) Risk-informed severe accident risk data base management module (RI-SARD): provides a platform to identify the initiating event, determine plant status and equipment availability, diagnoses the status of the reactor core, reactor vessel and containment building, and predicts the plant behaviors; (c) Severe accident management simulator module (VMAAP): runs the MAAP4 code with user friendly graphic interface for input deck and output display; (d) On-line severe accident management guidance module (On-line SAMG); provides available accident management strategies with an electronic format. The role of VMAAP in SAMEX can be described as followings. SARDB contains the most of high frequency scenarios based on a level 2 probabilistic safety analysis. Therefore, there is good chance that a real accident sequence is similar to one of the data base cases. In such a case, RI-SARD can predict an accident progression by a scenario-base or symptom-base search depends on the available plant parameter information. Nevertheless, there still may be deviations or variations between the actual scenario and the data base scenario. The deviations can be decreased by using a real-time graphic accident simulator, VMAAP.. VMAAP is a MAAP4-based severe accident simulation model for OPR-1000 plant. It can simulate spectrum of physical processes

Development of an orthosis for walking assistance using pneumatic artificial muscle: a quantitative assessment of the effect of assistance.

Science.gov (United States)

Kawamura, T; Takanaka, K; Nakamura, T; Osumi, H

2013-06-01

In recent years, there is an increase in the number of people that require support during walking as a result of a decrease in the leg muscle strength accompanying aging. An important index for evaluating walking ability is step length. A key cause for a decrease in step length is the loss of muscle strength in the legs. Many researchers have designed and developed orthoses for walking assistance. In this study, we advanced the design of an orthosis for walking assistance that assists the forward swing of the leg to increase step length. We employed a pneumatic artificial muscle as the actuator so that flexible assistance with low rigidity can be achieved. To evaluate the performance of the system, we measured the effect of assistance quantitatively. In this study, we constructed a prototype of the orthosis and measure EMG and step length on fitting it to a healthy subject so as to determine the effect of assistance, noting the increase in the obtained step length. Although there was an increase in EMG stemming from the need to maintain body balance during the stance phase, we observed that the EMG of the sartorius muscle, which helps swing the leg forward, decreased, and the strength of the semitendinosus muscle, which restrains the leg against over-assistance, did not increase but decreased. Our experiments showed that the assistance force provided by the developed orthosis is not adequate for the intended task, and the development of a mechanism that provides appropriate assistance is required in the future.

46 CFR 16.401 - Employee Assistance Program (EAP).

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Employee Assistance Program (EAP). 16.401 Section 16.401... Employee Assistance Programs § 16.401 Employee Assistance Program (EAP). The employer shall provide an Employee Assistance Program (EAP) for all crewmembers. The employer may establish the EAP as a part of its...

Computer Assisted Advising Tool (CAAT).

Science.gov (United States)

Matsen, Marie E.

Lane Community College's Computer Assisted Advising Tool (CAAT) is used by counselors to assist students in developing a plan for the completion of a degree or certificate. CAAT was designed to facilitate student advisement from matriculation to graduation by comparing degree requirements with the courses completed by students. Three major sources…

49 CFR 199.113 - Employee assistance program.

Science.gov (United States)

2010-10-01

... TESTING Drug Testing § 199.113 Employee assistance program. (a) Each operator shall provide an employee assistance program (EAP) for its employees and supervisory personnel who will determine whether an employee... 49 Transportation 3 2010-10-01 2010-10-01 false Employee assistance program. 199.113 Section 199...

12 CFR 560.43 - Foreign assistance investments.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Foreign assistance investments. 560.43 Section... INVESTMENT Lending and Investment Powers for Federal Savings Associations § 560.43 Foreign assistance investments. Pursuant to HOLA section 5(c)(4)(C), a Federal savings association may make foreign assistance...

Assistive Devices

Science.gov (United States)

If you have a disability or injury, you may use a number of assistive devices. These are tools, products or types of equipment that help you perform tasks and activities. They may help you move around, see, communicate, eat, or get ...

Light dark matter through assisted annihilation

International Nuclear Information System (INIS)

Dey, Ujjal Kumar; Maity, Tarak Nath; Ray, Tirtha Sankar

2017-01-01

In this paper we investigate light dark matter scenarios where annihilation to Standard Model particles at tree-level is kinematically forbidden. In such cases annihilation can be aided by massive Standard Model-like species, called assisters , in the initial state that enhances the available phase space opening up novel tree-level processes. We investigate the feasibility of such non-standard assisted annihilation processes to reproduce the observed relic density of dark matter. We present a simple scalar dark matter-scalar assister model where this is realised. We find that if the dark matter and assister are relatively degenerate the required relic density can be achieved for a keV-MeV scale dark matter. We briefly discuss the cosmological constraints on such dark matter scenarios.

Speech perception benefits of FM and infrared devices to children with hearing aids in a typical classroom.

Science.gov (United States)

Anderson, Karen L; Goldstein, Howard

2004-04-01

Children typically learn in classroom environments that have background noise and reverberation that interfere with accurate speech perception. Amplification technology can enhance the speech perception of students who are hard of hearing. This study used a single-subject alternating treatments design to compare the speech recognition abilities of children who are, hard of hearing when they were using hearing aids with each of three frequency modulated (FM) or infrared devices. Eight 9-12-year-olds with mild to severe hearing loss repeated Hearing in Noise Test (HINT) sentence lists under controlled conditions in a typical kindergarten classroom with a background noise level of +10 dB signal-to-noise (S/N) ratio and 1.1 s reverberation time. Participants listened to HINT lists using hearing aids alone and hearing aids in combination with three types of S/N-enhancing devices that are currently used in mainstream classrooms: (a) FM systems linked to personal hearing aids, (b) infrared sound field systems with speakers placed throughout the classroom, and (c) desktop personal sound field FM systems. The infrared ceiling sound field system did not provide benefit beyond that provided by hearing aids alone. Desktop and personal FM systems in combination with personal hearing aids provided substantial improvements in speech recognition. This information can assist in making S/N-enhancing device decisions for students using hearing aids. In a reverberant and noisy classroom setting, classroom sound field devices are not beneficial to speech perception for students with hearing aids, whereas either personal FM or desktop sound field systems provide listening benefits.

A framework for interactive visualization of digital medical images.

Science.gov (United States)

Koehring, Andrew; Foo, Jung Leng; Miyano, Go; Lobe, Thom; Winer, Eliot

2008-10-01

The visualization of medical images obtained from scanning techniques such as computed tomography and magnetic resonance imaging is a well-researched field. However, advanced tools and methods to manipulate these data for surgical planning and other tasks have not seen widespread use among medical professionals. Radiologists have begun using more advanced visualization packages on desktop computer systems, but most physicians continue to work with basic two-dimensional grayscale images or not work directly with the data at all. In addition, new display technologies that are in use in other fields have yet to be fully applied in medicine. It is our estimation that usability is the key aspect in keeping this new technology from being more widely used by the medical community at large. Therefore, we have a software and hardware framework that not only make use of advanced visualization techniques, but also feature powerful, yet simple-to-use, interfaces. A virtual reality system was created to display volume-rendered medical models in three dimensions. It was designed to run in many configurations, from a large cluster of machines powering a multiwalled display down to a single desktop computer. An augmented reality system was also created for, literally, hands-on interaction when viewing models of medical data. Last, a desktop application was designed to provide a simple visualization tool, which can be run on nearly any computer at a user's disposal. This research is directed toward improving the capabilities of medical professionals in the tasks of preoperative planning, surgical training, diagnostic assistance, and patient education.

Sources of population and family planning assistance.

Science.gov (United States)

1983-01-01

This document assesses the current status of population and family planning assistance throughout the world and provides brief sketches of the available sources including national governments, intergovernmental agencies such as the UNFPA and other UN entities, and nongovernmental funding, technical assistance, or funding and technical assistance organizations. The descriptions of aid-granting organizations describe their purposes, sources of funding, and activities, and give addresses where further information may be sought. At present about $100 million of the US $1 billion spent for family planning in developing countries each year comes from individuals paying for their own supplies and services, over $400 million is spent by national governments on their own programs, and about $450 million comes from developed country governments and private agencies. Over half of external assistance appears to be channeled through international agencies, and only a few countries provide a substantial proportion of aid bilaterally. In the past decade several governments, particularly in Asia, significantly increased the share of program costs they assumed themselves, and the most populous developing countries, China, India, and Indonesia, now contribute most of the funding for their own programs. Although at least 130 countries have provided population aid at some time, most is given by 12 industrialized countries. The US Agency for International Development (USAID) is the largest single donor, but the US share of population assistance has declined to 50% of all assistance in 1981 from 60% in the early 1970s. Governments of Communist bloc countries have made only small contributions to international population assistance. Most governmental asistance is in cash grant form, but loans, grants in kind, and technical assistance are also provided. Private organizations give assistance primarily to other private organizations in developing countries, and have been major innovators in

ArchE - An Architecture Design Assistant

Science.gov (United States)

2007-08-02

Architecture Design Assistant Len Bass August 2, 2007 Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...ArchE - An Architecture Design Assistant 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6. AUTHOR(S) 5d. PROJECT NUMBER 5e. TASK...X, Module X 3 Author / Presenter, Date if Needed What is ArchE? ArchE is a software architecture design assistant, which: • Takes quality and

Wearable Assistive Devices for the Blind

OpenAIRE

Velazquez, Ramiro

2016-01-01

Assistive devices are a key aspect in wearable systems for biomedical applications, as they represent potential aids for people with physical and sensory disabilities that might lead to improvements in the quality of life. This chapter focuses on wearable assistive devices for the blind. It intends to review the most significant work done in this area, to present the latest approaches for assisting this population and to understand universal design concepts for the development of wearable ass...

Fast-track video-assisted thoracoscopic surgery

DEFF Research Database (Denmark)

Holbek, Bo Laksafoss; Petersen, René Horsleben; Kehlet, Henrik

2016-01-01

Objectives To provide a short overview of fast-track video-assisted thoracoscopic surgery (VATS) and to identify areas requiring further research. Design A literature search was made using key words including: fast-track, enhanced recovery, video-assisted thoracoscopic surgery, robot......-assisted thoracoscopic surgery (RATS), robotic, thoracotomy, single-incision, uniportal, natural orifice transluminal endoscopic surgery (NOTES), chest tube, air-leak, digital drainage, pain management, analgesia, perioperative management, anaesthesia and non-intubated. References from articles were screened for further...

Justice-based social assistance

Science.gov (United States)

Barrientos, Armando

2016-01-01

What are the main objectives of social protection institutions in developing countries? What should be their scope and reach? What is the source of their legitimacy? Finding appropriate answers to these questions is essential to understanding, and shaping, the emergence of welfare institutions in low- and middle-income countries. Most available answers rely on instrumental arguments. Few make reference to normative principles. This article draws on three concepts from Rawls – social justice as regulating cooperation, the social minimum, and the need for a freestanding political notion of social justice – to develop a coherent argument for grounding social assistance on social justice. In line with this argument, it identifies some parameters for a justice-based social assistance. This article then discusses, with examples, the tensions existing between a social justice-based social minimum and ‘real’ social assistance institutions emerging in developing countries. PMID:27708544

The Ethics of Assisted Suicide.

Science.gov (United States)

Callahan, Jay

1994-01-01

From social work perspective, considers ethics of assisted suicide. Discusses traditional social work value of client self-determination and identifies tensions in this ideal and conflicts with value of client well-being. Finds assisted suicide unethical, arguing that studies have shown judgment of most suicidal people to be impaired as result of…

Versatile Manipulation for Assistive Free-Flyers

Data.gov (United States)

National Aeronautics and Space Administration — Assistive Free-Flyers (AFFs) are flying robots designed to share the living space with human astronauts in orbit. These robots have shown the potential to assist...

The Rapid Cycling Synchrotron of the EURISOL Beta-Beam facility

CERN Document Server

Lachaize, A

During the last two years, several upgrades of the initial baseline scenario were studied with the aim of increasing the average intensity of ion beams in the accelerator chain of the Beta Beam complex. This is the reason why the Rapid Cycling Synchrotron (RCS) specifications were reconsidered many times.General considerations on the optical design were presented at the Beta Beam Task Meetings held at CERN and at Saclay in 2005 (http://beta-beam.web.cern.ch/beta-beam/). More detailed beam optics studies were performed during the next months. Lattices, RF system parameters, multi-turn injection scheme, fast extraction, closed orbit correction and chromaticity correction systems were proposed for different versions of the RCS.Finally, the RCS specifications have stabilized in November 2006 after the fourth Beta Beam Task Meeting when it was decided to fix the maximum magnetic rigidity of ion beams to 14.47 T.m (3.5 GeV equivalent proton energy) and to adopt a ring physical radius of 40 m in order to facilitat...

Feasibility of High Power Refractory Metal Foil-Targets for EURISOL

CERN Document Server

R. Wilfinger, J. Lettry and the EURISOL Task 3 Workgroup

Radioisotopes are produced by the ISOL method in thick targets. In existing ISOL facilities, only small yields have been obtained for short-lived nuclei close to the driplines due to the radioactive decay during the diffusion, effusion and ionization processes. An increase of the proton beam current increases the production rate, which is directly proportional to the primary proton flux. But at the same time, the power deposition inside the target is also increased proportional to the primary proton flux...

Teamwork, communication, and anaesthetic assistance in Scotland.

Science.gov (United States)

Rutherford, J S; Flin, R; Mitchell, L

2012-07-01

Teamwork involves supporting others, solving conflicts, exchanging information, and co-ordinating activities. This article describes the results of interviews with anaesthetic assistants (n=22) and consultant anaesthetists (n=11), investigating the non-technical skills involved in the effective teamwork of the anaesthetic assistants in the operating theatre. Anaesthetic assistants most commonly saw themselves as either being part of a theatre team or an anaesthetic subgroup and most commonly described the senior theatre nurse as their team leader. Examples of supporting others included the following: checking equipment, providing equipment, being a second pair of eyes, providing emotional and decision support, and supporting trainee anaesthetists. Of the 19 anaesthetic assistants who were asked if they would speak up if they disagreed with a decision in theatre, only 14 said that they would voice their concerns, and the most common approach was to ask for the logic behind the decision. The WHO checklist was described as prompting some anaesthetists to describe their anaesthetic plan to the anaesthetic assistant, when previously the anaesthetist would have failed to communicate their intentions in time for equipment to be prepared. The prioritization of activities to achieve co-ordination and the anaesthetic assistants becoming familiar with the idiosyncrasies of their regular anaesthetists were also described by anaesthetic assistants.

Equine-Assisted Therapies: Complementary Medicine or Not?

Science.gov (United States)

Ratcliffe, Katherine T.; Sanekane, Cindy

2009-01-01

Equine-assisted therapies are interventions that use the unique qualities of a horse to assist persons with disabilities to improve their gross motor, language, social, and self-help skills. Programs offering these services are varied and operate on all major continents across the world. The effectiveness of equine-assisted therapies is generally…

Aero-Assisted Pre-Stage for Ballistic and Aero-Assisted Launch Vehicles

Science.gov (United States)

Ustinov, Eugene A.

2012-01-01

A concept of an aero-assisted pre-stage is proposed, which enables launch of both ballistic and aero-assisted launch vehicles from conventional runways. The pre-stage can be implemented as a delta-wing with a suitable undercarriage, which is mated with the launch vehicle, so that their flight directions are coaligned. The ample wing area of the pre-stage combined with the thrust of the launch vehicle ensure prompt roll-out and take-off of the stack at airspeeds typical for a conventional jet airliner. The launch vehicle is separated from the pre-stage as soon as safe altitude is achieved, and the desired ascent trajectory is reached. Nominally, the pre-stage is non-powered. As an option, to save the propellant of the launch vehicle, the pre-stage may have its own short-burn propulsion system, whereas the propulsion system of the launch vehicle is activated at the separation point. A general non-dimensional analysis of performance of the pre-stage from roll-out to separation is carried out and applications to existing ballistic launch vehicle and hypothetical aero-assisted vehicles (spaceplanes) are considered.

Magnetic Launch Assist Demonstration Test

Science.gov (United States)

2001-01-01

This image shows a 1/9 subscale model vehicle clearing the Magnetic Launch Assist System, formerly referred to as the Magnetic Levitation (MagLev), test track during a demonstration test conducted at the Marshall Space Flight Center (MSFC). Engineers at MSFC have developed and tested Magnetic Launch Assist technologies. To launch spacecraft into orbit, a Magnetic Launch Assist System would use magnetic fields to levitate and accelerate a vehicle along a track at very high speeds. Similar to high-speed trains and roller coasters that use high-strength magnets to lift and propel a vehicle a couple of inches above a guideway, a launch-assist system would electromagnetically drive a space vehicle along the track. A full-scale, operational track would be about 1.5-miles long and capable of accelerating a vehicle to 600 mph in 9.5 seconds. This track is an advanced linear induction motor. Induction motors are common in fans, power drills, and sewing machines. Instead of spinning in a circular motion to turn a shaft or gears, a linear induction motor produces thrust in a straight line. Mounted on concrete pedestals, the track is 100-feet long, about 2-feet wide and about 1.5-feet high. The major advantages of launch assist for NASA launch vehicles is that it reduces the weight of the take-off, the landing gear, the wing size, and less propellant resulting in significant cost savings. The US Navy and the British MOD (Ministry of Defense) are planning to use magnetic launch assist for their next generation aircraft carriers as the aircraft launch system. The US Army is considering using this technology for launching target drones for anti-aircraft training.

Tritium-assisted fusion breeders

International Nuclear Information System (INIS)

Greenspan, E.; Miley, G.H.

1983-08-01

This report undertakes a preliminary assessment of the prospects of tritium-assisted D-D fuel cycle fusion breeders. Two well documented fusion power reactor designs - the STARFIRE (D-T fuel cycle) and the WILDCAT (Cat-D fuel cycle) tokamaks - are converted into fusion breeders by replacing the fusion electric blankets with 233 U producing fission suppressed blankets; changing the Cat-D fuel cycle mode of operation by one of the several tritium-assisted D-D-based modes of operation considered; adjusting the reactor power level; and modifying the resulting plant cost to account for the design changes. Three sources of tritium are considered for assisting the D-D fuel cycle: tritium produced in the blankets from lithium or from 3 He and tritium produced in the client fission reactors. The D-D-based fusion breeders using tritium assistance are found to be the most promising economically, especially the Tritium Catalyzed Deuterium mode of operation in which the 3 He exhausted from the plasma is converted, by neutron capture in the blanket, into tritium which is in turn fed back to the plasma. The number of fission reactors of equal thermal power supported by Tritium Catalyzed Deuterium fusion breeders is about 50% higher than that of D-T fusion breeders, and the profitability is found to be slightly lower than that of the D-T fusion breeders

Mutual emergency assistance for radiation accidents

International Nuclear Information System (INIS)

1980-11-01

In 1963 the International Atomic Energy Agency (IAEA) issued a document, WP.35, dated 23 November 1963, based on information provided by a number of its Member States on the type of radiological assistance that they might be able to make available in the event of a radiation emergency in another country at the request of that country. The document was subsequently revised in 1968 and 1971 with the participation of the World Health Organization (WHO), the Food and Agriculture Organization of the United Nations (FAO) and the International Labour Organisation (ILO). In 1979, an expanded questionnaire to ascertain what could be required by the State in the event of a major radiation accident, was sent jointly by these organizations with the participation of the Office of the United Nations Disaster Relief Co-ordinator (UNDRO), to all their Member States. The text of the expanded questionnaire is reproduced. The present document lists all the information, received up to mid 1980, that contains offers of assistance made by a State. It also lists information on the assistance that might be required by the State. In general, the replies have been reproduced in the form in which they were received, although a few changes in presentation have been introduced in the interest of brevity and clarity. Some countries have pointed out that their replies are necessarily of a general character and that the full extent of the assistance they would be capable of providing could be determined only after a specific request had been received. The information given in this document should therefore be regarded only as a guide to the type of radiological assistance that might be available and/or needed. Other available international assistance includes that provided by the Agency through the IAEA Radiation (Emergency) Assistance Procedures, by WHO through its system of Collaborating Centres on human radiation pathology, and by various States via regional or inter-countries' agreements on

From Resource-Adaptive Navigation Assistance to Augmented Cognition

Science.gov (United States)

Zimmer, Hubert D.; Münzer, Stefan; Baus, Jörg

In an assistance scenario, a computer provides purposive information supporting a human user in an everyday situation. Wayfinding with navigation assistance is a prototypical assistance scenario. The present chapter analyzes the interplay of the resources of the assistance system and the resources of the user. The navigation assistance system provides geographic knowledge, positioning information, route planning, spatial overview information, and route commands at decision points. The user's resources encompass spatial knowledge, spatial abilities and visuo-spatial working memory, orientation strategies, and cultural habit. Flexible adaptations of the assistance system to available resources of the user are described, taking different wayfinding goals, situational constraints, and individual differences into account. Throughout the chapter, the idea is pursued that the available resources of the user should be kept active.

Radiological assistance program: Region I. Part I

International Nuclear Information System (INIS)

Musolino, S.V.; Kuehner, A.V.; Hull, A.P.

1985-01-01

The purpose of the Radiological Assistance Program (RAP) is to make DOE resources available and provide emergency assistance to state and local agencies in order to control radiological hazards, protect the public health and safety, and minimize the loss of property. This plan is an integral part of a nationwide program of radiological assistance established by the US DOE, and is implemented on a regional basis. The Brookhaven Area Office (BHO) Radiological Assistance Program is applicable to DOE Region I, which consists of the New England States, New York, New Jersey, Pennsylvania, Delaware, Maryland and the District of Columbia. The BHO RAP-1 has been developed to: (a) ensure the availability of an effective radiological assistance capability to ensure the protection of persons and property; (b) provide guidelines to RAP-1 Team personnel for the evaluation of radiological incidents and implementation of corrective actions; (c) maintain liaison with other DOE installations, Federal, State and local organizations which may become involved in radiological assistance operations in Region I; and (d) encourage development of a local capability to cope with radiological incidents

Posthumous Assisted Reproduction from Islamic Perspective

Directory of Open Access Journals (Sweden)

Reza Omani Samani

2008-01-01

Full Text Available Rapid development in assisted reproductive techniques along with relieving the pain of childlessnesshas brought new ethical and policy dilemmas. Posthumous assisted reproduction is the mostchallenging, difficult and sensitive issue to be discussed ethically and religiously. In this paper theacceptability of the posthumous reproduction in Islamic contexts is evaluated and major concernslike Consent and ownership of the gametes after death, Family and Marriage vision and Welfareof the child are discussed together with some international legislation. We can conclude that uponIslamic vision to assisted reproductive techniques as treatment of families and relieving the seriousproblem of childlessness, posthumous assisted reproduction is unacceptable even with previouslyfrozen gametes or embryos. Also, Islamic vision to marriage, consent and welfare of the childconfirms the unacceptability. There must be some law or legislation to ban this procedure in Islamiccontexts.

Recognizing the value of assistance dogs in society.

Science.gov (United States)

Audrestch, Hilary M; Whelan, Chantelle T; Grice, David; Asher, Lucy; England, Gary C W; Freeman, Sarah L

2015-10-01

Assistance dogs are specially trained to undertake a variety of tasks to help individuals with disabilities. This review gives an overview of the different types of assistance dogs in the UK, including guide dogs, hearing dogs, mobility assistance dogs, service dogs and dual-purpose dogs. The literature describes many benefits of assistance dogs, including their impact on physical wellbeing and safety of their 'owners,' as well as on psychological wellbeing and social inclusion. The role of assistance dogs in society is widely recognized by the public, but is not currently acknowledged in government social policy. The current evidence on the benefits of assistance dogs is limited by the type and scale of current research. This article highlights the need for independent funding for high quality research to enable social care and policy makers to make evidence-based decisions on the value of assistance dogs to people with disabilities. Copyright © 2015 Elsevier Inc. All rights reserved.

Assistive and Rehabilitation Robotic System

Directory of Open Access Journals (Sweden)

Adrian Abrudean

2015-06-01

Full Text Available A short introduction concerning the content of Assistive Technology and Rehabilitation Engineering is followed by a study of robotic systems which combine two or more assistive functions. Based on biomechanical aspects, a complex robotic system is presented, starting with the study of functionality and ending with the practical aspects of the prototype development.

Assisted inflation from geometric tachyon

International Nuclear Information System (INIS)

Panigrahi, Kamal L.; Singh, Harvendra

2007-01-01

We study the effect of rolling of N D3-branes in the vicinity of NS5-branes. We find out that this system coupled with the four dimensional gravity gives the slow roll assisted inflation of the scalar field theory. Once again this expectation is exactly similar to that of N-tachyon assisted inflation on unstable D-branes

Assisted Suicide in Switzerland: Clarifying Liberties and Claims.

Science.gov (United States)

Hurst, Samia A; Mauron, Alex

2017-03-01

Assisting suicide is legal in Switzerland if it is offered without selfish motive to a person with decision-making capacity. Although the 'Swiss model' for suicide assistance has been extensively described in the literature, the formally and informally protected liberties and claims of assistors and recipients of suicide assistance in Switzerland are incompletely captured in the literature. In this article, we describe the package of rights involved in the 'Swiss model' using the framework of Hohfeldian rights as modified by Wenar. After outlining this framework, we dissect the rights involved in suicide assistance in Switzerland, and compare it with the situation in England and Germany. Based on this approach, we conclude that in Switzerland, claim rights exist for those requesting suicide assistance, and for those who are considering providing such assistance, even though no entitlements exist toward suicide assistance. We then describe the implementation of the 'Swiss model' and difficulties arising within it. Clarifying these issues is important to understand the Swiss situation, to evaluate what features of it may or may not be worth correcting or emulating, and to understand how it can impact requests for suicide assistance in other countries due to 'suicide tourism'. It is also important to understand exactly what sets Switzerland apart from other countries with different legislations regarding suicide assistance. © 2016 John Wiley & Sons Ltd.

Emergency Response and Humanitarian Assistance Operations

Science.gov (United States)

2010-12-01

Humanitarian Assistance Operations Op Food DSTr I Support food distribution with U.S. ARMY / WFP - 03 to 18Fev2010 15 Dias 637,5 Ton de alimentos ...distribution by WFP – 10 a 18Mar2010 – 21 a 28Mar2010 1.723 Ton de Alimentos em 30 Dias Humanitarian Assistance Operations Op Food DSTr II Supporting food...distribution by WFP – 10 a 18Mar2010 8 Dias 420 Ton de alimentos Humanitarian Assistance Operations Op Food DSTr III Supporting food distribution by

Robot-assisted surgery in gynecological oncology

DEFF Research Database (Denmark)

Kristensen, Steffen E; Mosgaard, Berit J; Rosendahl, Mikkel

2017-01-01

INTRODUCTION: Robot-assisted surgery has become more widespread in gynecological oncology. The purpose of this systematic review is to present current knowledge on robot-assisted surgery, and to clarify and discuss controversies that have arisen alongside the development and deployment. MATERIAL...... was performed by screening of titles and abstracts, and by full text scrutiny. From 2001 to 2016, a total of 76 references were included. RESULTS: Robot-assisted surgery in gynecological oncology has increased, and current knowledge supports that the oncological safety is similar, compared with previous...

From Research Assistant to Professional Research Assistance: Research Consulting as a Form of Research Practice

Directory of Open Access Journals (Sweden)

Dawn E. Pollon

2013-01-01

Full Text Available Research assistantships have long been viewed as an extension of the formal education process, a form of apprenticeship, and a pathway into the professional practice of research in institutional settings. However, there are other contexts in which researchers practice research. This self-study documents the formative role research assistantships played in the authors’ development as professional research consultants. Four professional research consultants who held research assistant positions during their master’s and doctoral studies describe the contributions of their research assistantship experiences to the advancement of their knowledge, skills, and passion for research and subsequently to their career decisions. Professional research consulting is identified as a natural extension of research assistant roles and a potential career path. The article enhances current understandings about the ways research assistantships contribute to the development of researchers, and specifically to the development of professional research consultants. The analysis will be of interest to students contemplating entering into research assistantships, current research assistants, current research assistant supervisors, academic staff looking to improve their research productivity, and department chairs.

Bioethics for clinicians: 11. Euthanasia and assisted suicide

Science.gov (United States)

Lavery, J V; Dickens, B M; Boyle, J M; Singer, P A

1997-01-01

Euthanasia and assisted suicide involve taking deliberate action to end or assist in ending the life of another person on compassionate grounds. There is considerable disagreement about the acceptability of these acts and about whether they are ethically distinct from decisions to forgo life-sustaining treatment. Euthanasia and assisted suicide are punishable offences under Canadian criminal law, despite increasing public pressure for a more permissive policy. Some Canadian physicians would be willing to practise euthanasia and assisted suicide if these acts were legal. In practice, physicians must differentiate between respecting competent decisions to forgo treatment, providing appropriate palliative care, and acceeding to a request for euthanasia or assisted suicide. Physicians who believe that euthanasia and assisted suicide should be legally accepted in Canada should pursue their convictions only through legal and democratic means. PMID:9164399

Sense of agency in continuous action: Assistance-induced performance improvement is self-attributed even with knowledge of assistance.

Science.gov (United States)

Inoue, Kazuya; Takeda, Yuji; Kimura, Motohiro

2017-02-01

In a task involving continuous action to achieve a goal, the sense of agency increases with an improvement in task performance that is induced by unnoticed computer assistance. This study investigated how explicit instruction about the existence of computer assistance affects the increase of sense of agency that accompanies performance improvement. Participants performed a continuous action task in which they controlled the direction of motion of a dot to a goal by pressing keys. When instructions indicated the absence of assistance, the sense of agency increased with performance improvement induced by computer assistance, replicating previous findings. Interestingly, this increase of sense of agency was also observed even when instructions indicated the presence of assistance. These results suggest that even when a plausible cause of performance improvement other than one's own action exists, the improvement can be misattributed to one's own control of action, resulting in an increased sense of agency. Copyright © 2016 Elsevier Inc. All rights reserved.

Environmentally assisted cracking of LWR materials

International Nuclear Information System (INIS)

Chopra, O.K.; Chung, H.M.; Kassner, T.F.; Shack, W.J.

1995-12-01

Research on environmentally assisted cracking (EAC) of light water reactor materials has focused on (a) fatigue initiation in pressure vessel and piping steels, (b) crack growth in cast duplex and austenitic stainless steels (SSs), (c) irradiation-assisted stress corrosion cracking (IASCC) of austenitic SSs, and (d) EAC in high- nickel alloys. The effect of strain rate during different portions of the loading cycle on fatigue life of carbon and low-alloy steels in 289 degree C water was determined. Crack growth studies on wrought and cast SSs have been completed. The effect of dissolved-oxygen concentration in high-purity water on IASCC of irradiated Type 304 SS was investigated and trace elements in the steel that increase susceptibility to intergranular cracking were identified. Preliminary results were obtained on crack growth rates of high-nickel alloys in water that contains a wide range of dissolved oxygen and hydrogen concentrations at 289 and 320 degree C. The program on Environmentally Assisted Cracking of Light Water Reactor Materials is currently focused on four tasks: fatigue initiation in pressure vessel and piping steels, fatigue and environmentally assisted crack growth in cast duplex and austenitic SS, irradiation-assisted stress corrosion cracking of austenitic SSs, and environmentally assisted crack growth in high-nickel alloys. Measurements of corrosion-fatigue crack growth rates (CGRs) of wrought and cast stainless steels has been essentially completed. Recent progress in these areas is outlined in the following sections

Assisted Dying in Canada.

Science.gov (United States)

Schuklenk, Udo

This paper makes an affirmative ethical case in favour of the decriminalization of assisted dying in Canada. It then proceeds to defending the affirmative case against various slippery-slope arguments that are typically deployed by opponents of assisted dying. Finally, a recent case of questionable professional conduct by anti-euthanasia campaigners cum academics is flagged as a warning to all of us not to permit the quality of the professional debate to deteriorate unacceptably, despite the personal emotional investments involved on all sides of the debate.

New modes of assisted mechanical ventilation.

Science.gov (United States)

Suarez-Sipmann, F

2014-05-01

Recent major advances in mechanical ventilation have resulted in new exciting modes of assisted ventilation. Compared to traditional ventilation modes such as assisted-controlled ventilation or pressure support ventilation, these new modes offer a number of physiological advantages derived from the improved patient control over the ventilator. By implementing advanced closed-loop control systems and using information on lung mechanics, respiratory muscle function and respiratory drive, these modes are specifically designed to improve patient-ventilator synchrony and reduce the work of breathing. Depending on their specific operational characteristics, these modes can assist spontaneous breathing efforts synchronically in time and magnitude, adapt to changing patient demands, implement automated weaning protocols, and introduce a more physiological variability in the breathing pattern. Clinicians have now the possibility to individualize and optimize ventilatory assistance during the complex transition from fully controlled to spontaneous assisted ventilation. The growing evidence of the physiological and clinical benefits of these new modes is favoring their progressive introduction into clinical practice. Future clinical trials should improve our understanding of these modes and help determine whether the claimed benefits result in better outcomes. Copyright © 2013 Elsevier España, S.L. and SEMICYUC. All rights reserved.

Assisted Living

Science.gov (United States)

... a resident's needs depends as much on the philosophy and services of the assisted living facility as it does on the quality of care. The Administration on Aging, a part of the U.S. Department of Health and Human Services (HHS), offers these suggestions to help you ...

Assisted suicide and assisted voluntary euthanasia: Stransham-Ford ...

African Journals Online (AJOL)

The decision in Stransham-Ford v Minister of Justice and Correctional. Services and Others[1] by the North Gauteng High Court held that a terminally ill patient with intractable suffering was entitled to commit suicide with the assistance of his doctor, whose conduct would not be unlawful. The evidence was that the applicant ...

28 CFR 0.168 - Redelegation by Assistant Attorneys General.

Science.gov (United States)

2010-07-01

..., Penalties, and Forfeitures § 0.168 Redelegation by Assistant Attorneys General. (a) Assistant Attorneys... the Assistant Attorney General level must be presented to the Assistant Attorney General for... the Deputy Attorney General or the Associate Attorney General, as appropriate, before taking effect...

CARS 2008: Computer Assisted Radiology and Surgery. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2008-06-15

The proceedings contain contributions to the following topics: digital imaging, computed tomography, magnetic resonance, cardiac and vascular imaging, computer assisted radiation therapy, image processing and display, minimal invasive spinal surgery, computer assisted treatment of the prostate, the interventional radiology suite of the future, interventional oncology, computer assisted neurosurgery, computer assisted head and neck and ENT surgery, cardiovascular surgery, computer assisted orthopedic surgery, image processing and visualization, surgical robotics, instrumentation and navigation, surgical modelling, simulation and education, endoscopy and related techniques, workflow and new concepts in surgery, research training group 1126: intelligent surgery, digital operating room, image distribution and integration strategies, regional PACS and telemedicine, PACS - beyond radiology and E-learning, workflow and standardization, breast CAD, thoracic CAD, abdominal CAD, brain CAD, orthodontics, dentofacial orthopedics and airways, imaging and treating temporomandibular joint conditions, maxillofacial cone beam CT, craniomaxillofacial image fusion and CBCT incidental findings, image guided craniomaxillofacial procedures, imaging as a biomarker for therapy response, computer aided diagnosis. The Poster sessions cover the topics computer aided surgery, Euro PACS meeting, computer assisted radiology, computer aided diagnosis and computer assisted radiology and surgery.

Assistive products and the Sustainable Development Goals (SDGs).

Science.gov (United States)

Tebbutt, Emma; Brodmann, Rebecca; Borg, Johan; MacLachlan, Malcolm; Khasnabis, Chapal; Horvath, Robert

2016-11-29

The Sustainable Development Goals (SDGs) have placed great emphasis on the need for much greater social inclusion, and on making deliberate efforts to reach marginalized groups. People with disabilities are often marginalized through their lack of access to a range of services and opportunities. Assistive products can help people overcome impairments and barriers enabling them to be active, participating and productive members of society. Assistive products are vital for people with disabilities, frailty and chronic illnesses; and for those with mental health problems, and gradual cognitive and physical decline characteristic of aging populations. This paper illustrates how the achievement of each of the 17 SDGs can be facilitated by the use of assistive products. Without promoting the availability of assistive products the SDGs cannot be achieved equitably. We highlight how assistive products can be considered as both a mediator and a moderator of SDG achievement. We also briefly describe how the Global Cooperation on Assistive Technology (GATE) is working to promote greater access to assistive products on a global scale.

CARS 2008: Computer Assisted Radiology and Surgery. Proceedings

International Nuclear Information System (INIS)

2008-01-01

The proceedings contain contributions to the following topics: digital imaging, computed tomography, magnetic resonance, cardiac and vascular imaging, computer assisted radiation therapy, image processing and display, minimal invasive spinal surgery, computer assisted treatment of the prostate, the interventional radiology suite of the future, interventional oncology, computer assisted neurosurgery, computer assisted head and neck and ENT surgery, cardiovascular surgery, computer assisted orthopedic surgery, image processing and visualization, surgical robotics, instrumentation and navigation, surgical modelling, simulation and education, endoscopy and related techniques, workflow and new concepts in surgery, research training group 1126: intelligent surgery, digital operating room, image distribution and integration strategies, regional PACS and telemedicine, PACS - beyond radiology and E-learning, workflow and standardization, breast CAD, thoracic CAD, abdominal CAD, brain CAD, orthodontics, dentofacial orthopedics and airways, imaging and treating temporomandibular joint conditions, maxillofacial cone beam CT, craniomaxillofacial image fusion and CBCT incidental findings, image guided craniomaxillofacial procedures, imaging as a biomarker for therapy response, computer aided diagnosis. The Poster sessions cover the topics computer aided surgery, Euro PACS meeting, computer assisted radiology, computer aided diagnosis and computer assisted radiology and surgery