Logistics in Estonian business companies

Directory of Open Access Journals (Sweden)

A. Kiisler

2008-12-01

Full Text Available The article describes logistics survey in Estonia carried out in 2007 as a part of the LogOnBaltic project. The level of logistics in Estonian manufacturing, trading and logistics companies is explored through logistics costs, performance indicators, outsourcing, ICT use and logistics self-estimation of the companies responded. Responses from 186 Estonian companies were gathered through a web-based survey (38% of manufacturing, 38% of trading and 24% of logistics sector. Logistics costs as the percentage of turnover make in average 13.8% in manufacturing and 13.3% in trading. Transportation and inventory carrying cost form around 70% of overall logistics costs. Considering the logistics indicators surveyed, Estonian companies show up with relatively low perfect order fulfillment rates, short customer order fulfillment cycles and effective management of cash flows. The most widely outsourced logistics function is international transportation followed by domestic transportation, freight forwarding and reverse logistics. By 2010, the outsourcing of IT systems in logistics followed by inventory management, warehousing and product customization is expected to increase more substantially. The awareness of logistics importance is still low among Estonian companies. Only 27–44% of those agree that logistics has a considerable impact on profitability, competitive advantage, top management or customer service level.

Digimodernistlik eesti kirjanik / The Digimodernist Estonian Writer

Directory of Open Access Journals (Sweden)

Piret Viires

2013-06-01

Full Text Available The article examines the cultural situation following postmodernism in the first decade of the 21st century. To characterise this situation, the umbrella term “post-postmodernism” is used, as well as “neomodernism”, “altermodern”, “metamodernism”, “hypermodernity”, “performatism”, “critical realism” etc. All these approaches are, in a wider sense, united by their aim of opposing postmodernist cynicism and irony, and bringing back truth, simplicity and clarity. It has also been found that literature has returned or is returning to realism, and various cultural phenomena are emerging, which have been designated by the concept “new sincerity”.In descriptions of the current cultural situation, this trend seeking truth and simplicity is supported by approaches which emphasise the significance of technological developments during the last decade. A prominent figure here is Alan Kirby, who launched the term “digimodernism”, mainly linked with the adaptation and spread of Web 2.0 at the beginning of the 21st century: the blogosphere, Wikipedia, Twitter and Facebook.The article seeks answers to the question of whether we can talk about digimodernism in Estonian literature in the 2000s. In the 1990s Estonian writers were quite reluctant to undertake computer-technological experiments, and there are only a few examples of Estonian digital literature, whereas a change occurred in the 2000s. Many Estonian writers have had and still have their own blogs and surprisingly many have joined Facebook. The term “twitterature” is also familiar to Estonian writers. The article tackles the dominant topics in the blogs of Estonian writers and analyses their possible collective creative work on Facebook. A question is raised as to whether it is possible that the fragmentary narrative structure of blogs and Facebook has influenced mainstream literature.The article concludes that one essential change in Estonian literature in the

Ethnic Self-Esteem and Intergroup Attitudes Among the Estonian Majority and the non-Estonian Minority

Directory of Open Access Journals (Sweden)

Maaris Raudsepp

2009-11-01

Full Text Available The study was focussed on the relationships between ethnic self-esteem and various indicators of intergroup attitudes in a representative sample of adult population of Estonia (N=1142. Attitudinal variables that discriminated most between persons with high and low ethnic self-esteem were identified. Among Estonians ethnic self-esteem was related to positive ingroup bias, readiness for outgroup contact, perceived threat from the outgroup, attitudes to non-Estonian minority, and attitudes toward minority integration. Among non-Estonians ethnic self-esteem was related to readiness for outgroup contact, ethnic sterotypes, and various attitudes towards minority integration. An attempt was made to reconstruct the system of intergroup attidues of prototypical persons with high and low ethnic selfesteem and to describe psychological implications of high and low ethnic self-esteem for members of majority and minority groups. Various theoretical models (social identity theory, integrated threat theory, social dominane theory were used for interpretation of the results.

Joakim Helenius: Estonian Air võtku eeskuju airBalticust / Siim Sultson

Index Scriptorium Estoniae

Sultson, Siim

2010-01-01

Estonian Airi ühe võimaliku nõukogu esimehe Jaokim Heleniuse hinnangul on väikeste lennufirmade, nagu Estonian Air ja airBaltic jaoks päris palju tegutsemisruumi. Estonian Airil tuleb leida oma nišš ja kindel, kuid omanäoline strateegia

Swedish-Estonian energy forest research cooperation

International Nuclear Information System (INIS)

Ross, J.; Kirt, E.; Koppel, A.; Kull, K.; Noormets, A.; Roostalu, H.; Ross, V.; Ross, M.

1996-01-01

The Organization of Estonian energetic economy is aimed at cutting the usage of oil, gas and coal and increasing the local resources firewood, oil-shale and peat for fuel. The resources of low-valued firewood-brushwood, fallen deadwood etc. are available during the following 10-15 years, but in the future the cultivation of energy forest (willow) plantations will be actual. During the last 20 years the Swedish scientists have been extensively studying the willow forest selection, cultivation and use in energetics and waste water purification systems. A Swedish-Estonian energy forest research project was started in 1993 between the Swedish Agricultural University on one hand and Toravere Observatory, Institute of Zoology and Botany, Estonian Academy of Sciences and Estonian Potato Processing Association on the other hand. In spring 5 willow plantations were established with the help of Swedish colleagues and obtained from Sweden 36000 willow cuttings. The aim of the project: a) To study experimentally and by means of mathematical modelling the biogeophysical aspects of growth and productivity of willow plantations in Sweden and Estonian climatological conditions. b) To study the possibility of using the willow plantations in waste waters purification. c) To study the economical efficiency of energy forest as an energy resource under the economic and environmental conditions of Estonia. d) To study the economic efficiency of willow plantations as a raw material for the basket industry in Estonia. e) To select the most productive and least vulnerable willow clones for practical application in energy plantations. During 1993 in all five plantations detailed analysis of soil properties has been carried out. In the plantation at Toravere Observatory phytometrical measurements were carried out - the growth of plant biomass leaf and stem area, vertical distribution of dry matter content, biomass and phyto area separately for leaves and stems has been performed. Some

Estonian Air lõpetab Pariisi ja Vilniuse lennud / Hindrek Riikoja

Index Scriptorium Estoniae

Riikoja, Hindrek

2005-01-01

Talvisele lennuplaanile üleminev Estonian Air lõpetab otselennud Tallinnast Vilniusesse ja Pariisi. Estonian Airi presidendi Borge Thornbechi sõnul kavatseb firma suurendada talvehooajal turismilendude mahtu

Air Baltic: Estonian Air on nurka surutud / Teele Tammeorg

Index Scriptorium Estoniae

Tammeorg, Teele

2010-01-01

Air Balticu asepresidendi Janis Vanagsi hinnangul on Estonian Air aastaid jätnud tähelepanuta oma peamised turismiturud ning on praegu halvas seisus. Air Baltic on endiselt huvitatud Estonian Airi ostust. Majandus- ja kommunikatsiooniminister Juhan Partsi seisukoht

Estonian Air valmistub odavate piletitega EasyJeti tulekuks / Erkki Erilaid

Index Scriptorium Estoniae

Erilaid, Erkki

2004-01-01

Estonian Air pidi langetama piletihindu Berliini ja Londoni liinil kolmandiku võrra, kuna oktoobri lõpust hakkab Tallinna lennujaamast reise tegema uus odavlennufirma Easy-Jet. Lisa: Estonian Airi hinnad internetis

Estonian Airi president : uus äristrateegia toob ettevõttele edu / Borge Thornbech ; interv. Andres Reimer

Index Scriptorium Estoniae

Thornbech, Borge

2007-01-01

Estonian Air asutas regionaalsete lendude korraldamiseks ettevõtte Estonian Air Regional, idee on arendada tegevust lühidistantsidel ja luua ühenduslüli lennukompanii Euroopa-liinide vahel. Kommenteerivad Olev Schults, Oleg Harlamov, Rein Mark. Vt. samas: Kõik aktsionärid vannuvad Estonian Airile truudust; Estonian Air kaalub Tartu lennuliini avamist. Kaart: Reisijate jagunemine sihtkohtade vahel. Graafikud: Estonian Air kukkus kahjumisse

SAS tahab Estonian Airi liita lätlaste firmaga airBaltic / Andres Eilart

Index Scriptorium Estoniae

Eilart, Andres

2007-01-01

SAS plaanib Estonian Airi ja Läti firma airBalticu liitmisega luua uue lennufirma. Autori hinnangul viitavad Estonian Airi laienemisplaanidele kriipsu peale tõmbamine ja SAS-i investeeringud airBalticusse sellele, et ühendamise käigus "neelab" Läti firma Estonian Airi

Stocks of organic carbon in Estonian soils

Directory of Open Access Journals (Sweden)

Kõlli, Raimo

2009-06-01

Full Text Available The soil organic carbon (SOC stocks (Mg ha–1 ofautomorphic mineral (9 soil groups, hydromorphic mineral (7, and lowland organic soils (4 are given for the soil cover or solum layer as a whole and also for its epipedon (topsoil layer. The SOC stocks for forest, arable lands, and grasslands and for the entire Estonian soil cover were calculated on the basis of the mean SOC stock and distribution area of the respective soil type. In the Estonian soil cover (42 400 km2, a total of 593.8 ± 36.9 Tg of SOC is retained, with 64.9% (385.3 ± 27.5 Tg in the epipedon layer (O, H, and A horizons and 35.1% in the subsoil (B and E horizons. The pedo-ecological regularities of SOC retention in soils are analysed against the background of the Estonian soil ordination net.

Estonian horticultural peat marketing: sales promotion and price formation. 2. part

International Nuclear Information System (INIS)

Hammer, Hele

1999-01-01

When forming prices, Estonian peat companies' decisions should be based on marginal cost analysis. Unfortunately most Estonian companies sell peat to intermediaries and cannot influence its price. Estonian peat producers have to choose between either selling peat directly or selling through a central marketing organization. Both systems have their pros and cons. Direct selling gives more freedom to individual producers but is more risky. Central marketing makes cost saving possible and is more effective and stable, but may alienate producers from clients and markets. Whichever marketing system Estonian peat companies choose, the most important elements in their marketing strategy should be: careful market analysis, personal sales, attending trade shows, catalogues, quality service and offering transportation services. (author)

Transformational Leadership in the Estonian Defence Forces

Directory of Open Access Journals (Sweden)

Antek Kasemaa

2015-06-01

Full Text Available Purpose – The study is a contribution to the validation of the 15 items and 5 subscales Transformational Leadership Scale (TLS proposed by Rafferty and Griffin (2004. Design/methodology/approach – The sample includes participants from different levels of the Estonian Defence Forces (EDF military hierarchy (N=2570. The structure of the TLS was examined by using exploratory and confirmatory factor analyses. Additionally ANOVA was used to compare the results between different subsamples. Findings – TLS showed satisfactory reliability. Confirmatory factor analyses found TLS as valid five dimensions instrument to measure transformational leadership in the Estonian military context. Different management levels showed different emphases among the dimensions of transformational leadership. Research and practical limitations/implications – TLS will be an important tool to use in transformational leadership research in the Estonian military context and beyond. Additionally, the current research contributes to the development of alternative measurement tools besides the most commonly used MLQ. The limitation of the work will be the rather homogenous sample from the Estonian military, however it will open the door for the subsequent research using different samplings. Originality/value – The current research found TLS to be a reliable and valid instrument, very short and therefore easy to administrate, having the possibility to use it with five dimensional and as one general transformational instrument as well.

Uniting the Divided Continent. The Estonian National Committee of the European Movement

Directory of Open Access Journals (Sweden)

Pauli Heikkilä

2010-12-01

Full Text Available The article examines the exiled Estonian politicians in the European Movement in the early Cold War period. The ultimate goal of exiled Estonians was to restore their state’s independence. In order to promote this, Estonian leaders sought connections with Western leaders. The European Movement was the only organisation involving actors from both the East and the West, and this corresponded to the Estonian discourse on Europe as a whole. Therefore, the European Movement was appreciated, although its limited opportunities for decisive actions were also recognised. East and West European interest in the European Movement declined as West European integration rapidly intensified through the European Coal and Steel Community (ECSC and particularly after the January 1952 Eastern European Conference in London. By 1957, disappointment in the inability of European unification to help regain Estonian independence became evident.

Estonian Airi uued soodsad pakkumised

Index Scriptorium Estoniae

2010-01-01

Estonian Airi kodulehelt on võimalik osta lennupileteid koostööpartnerite poolt pakutavatele mandritevahelistele lendudele ning broneerida internetis hotellituba Euroopa suurima hotelli broneerimise teenust pakkuva ettevõtte Booking.com kaudu

Cresco sai lahti võlast SASile ja osalusest Estonian Airis / Rivo Sarapik, Alyona Stadnik

Index Scriptorium Estoniae

Sarapik, Rivo, 1981-

2010-01-01

Majandus- ja kommunikatsiooniminister Juhan Parts ning SAS-i asepresident Benny Zakrisson kirjutasid alla Estonian Airi ostu-müügitehingule. Investeerimispank Cresco, millele kuulus 17% Estonian Airist, jääb välja Estonian Airi omanikeringist ning SAS-i nõue Crescole tühistatakse

On the System of Place Name Signs in Estonian Sign Language

Directory of Open Access Journals (Sweden)

Liina Paales

2011-05-01

Full Text Available A place name sign is a linguistic-cultural marker that includes both memory and landscape. The author regards toponymic signs in Estonian Sign Language as representations of images held by the Estonian Deaf community: they reflect the geographical place, the period, the relationships of the Deaf community with hearing community, and the common and distinguishing features of the two cultures perceived by community's members. Name signs represent an element of signlore, which includes various types of creative linguistic play. There are stories hidden behind the place name signs that reveal the etymological origin of place name signs and reflect the community's memory. The purpose of this article is twofold. Firstly, it aims to introduce Estonian place name signs as Deaf signlore forms, analyse their structure and specify the main formation methods. Secondly, it interprets place-denoting signs in the light of understanding the foundations of Estonian Sign Language, Estonian Deaf education and education history, the traditions of local Deaf communities, and also of the cultural and local traditions of the dominant hearing communities. Both perspectives - linguistic and folkloristic - are represented in the current article.

Emission from Estonian oil shale power plants

International Nuclear Information System (INIS)

Aunela, L.; Haesaenen, E.; Kinnunen, V.; Larjava, K.; Mehtonen, A.; Salmikangas, T.; Leskelae, J.; Loosaar, J.

1995-01-01

Flue gas emissions from pulverized oil shale fired boilers of Estonian and Baltic power plants have been studied. The concentrations of NO x , CO, C x H y , HCI, Hf and polycyclic aromatic hydrocarbons in flue gases have been found to be relatively low and acceptable according to German emission limits, for instance. Desulphurization degree of flue gases by SO 2 absorption with ash has been found to vary defending on boiler type and operation conditions. In spite of significant sulphur capture (average values for different boilers in the range between 68 and 77 % of the initial sulphur content of the fuel), SO 2 concentrations in flue gases remain still very high (up to 2600 mg/m 3 , 10% O 2 ). Very high concentrations of particles, especially at Estonian Power Plant (up o 6250 mg/m 3 , 10 % 0 2 ) have been detected. Heavy metal emissions were too high by the reason of particle control insufficiency as well. Yearly emission estimates of this study support the former Estonian ones within the range of 10-15 %. (author)

The symphonic music of the national schools in 20th century Europe in the repertoire of the Philharmonic of Cluj (1955-1989. Creative perspectives of C. Silvestri’s Chants Nostalgiques op. 27 no. 1

Directory of Open Access Journals (Sweden)

Simona Spiridon

2015-09-01

Full Text Available The present work focuses on the national cultures of the early 20th century in several European countries, such as Czechoslovakia, Poland, Hungary, Spain, Russia and Romania. Since my PhD thesis analyses the evolution of the Philharmonic “Transilvania”of Cluj between 1955-1989, there will be a thorough statistic of the concerts which were held during that period in which the orchestra performed musical pieces of the composers mentioned in this essay. For some concerts, there will also be stated the date when the concert took place, as well as the conductor who was invited to Cluj. There will also be an analysis of a piano work of the Romanian composer Constantin Silvestri (Chants Nostalgiques op. 27 no. 1 which I personally played a few years ago. The study will contain a musical bibliography, as well as several footnotes stating the documents found in the archives of the Philharmonic of Cluj.

The Representation of the Cold War in Three Estonian History Textbooks

Science.gov (United States)

Korbits, Keit

2015-01-01

The article looks at the discursive strategies different Estonian history textbooks employ to represent the Cold War period, and the "commonsense" ideologies instilled through these representations. The textbooks analysed include two history books dating back to the Estonian Soviet Socialist Republic and, for contrast, one written during…

Estonian Language of Technology as a Factor Supporting the Evolution of Engineering Thinking

Directory of Open Access Journals (Sweden)

Mägi, Vahur

2013-03-01

Full Text Available Casual mention of teaching technology subjects in Estonian schools dates back several centuries. Navigation and construction were amongthe earliest professional skills that were taught. As both of them required mathematical thinking skills, teaching the subjects was usually accompanied by explaining the principles of mathematics. The first technology book in Estonian was published about two centuries ago and it dealed with geodesy. The earliest Estonian glossaries of technological terminology were published in the fields of physics and chemistry. The rise of Estonian as a language of higher education and science in the country came about in the 1920s and 1930s. Faculty members of the Tallinn School of Technology then published the first textbooks composed in the Estonian language for students of technology. The Estonian Society for Technology and the Estonian Association of Engineers became seriously involved in linguistic activities. Together with the Vocational Teachers’ Assembly of Tartu they published an illustrated technology glossary for machinery and tools terms. It was followed by a glossary of construction and building terms, compiled under the lead of the University of Technology. In addition, journals of technology introducedinnovations in the lexicon of technology to the general public. The postwar period in the development of the lexicon of technical terms was of little significance at first. A surge in language creativity could be detected in the 1960s, when terminology became a target of constantly growing attention to the development of technology lexicon. Series of technology glossaries were published. This tendency has continued to this day.

Estonian Tax Structure

Directory of Open Access Journals (Sweden)

Viktor Trasberg

2014-08-01

Full Text Available The paper analyses Estonian tax structure changes during the last decade and critically assesses the current situation. The country’s tax mix is rather unique among EU countries – it has one of the highest proportions of consumption taxes in total taxes and the lowest level of capital and profit taxes. Such an unbalanced tax structure creates risks for public finances, limits revenue collection and distorts the business environment.

Estonian Golf & Country Club / Urmas Oja

Index Scriptorium Estoniae

Oja, Urmas, 1981-2012

2005-01-01

Konkursil "Eesti parim puitehitis 2005" pälvis voodrilaua eripreemia Jõelähtme Estonian Golf & Country Club'i katus. Arhitekt Andres Siim. Sisearhitekt Juta Lember. Konstruktor: AS Resand. 11 värv. ill

Estonian Air / Kirsti Vainküla

Index Scriptorium Estoniae

Vainküla, Kirsti, 1972-

2004-01-01

Estonian Air reklaamib end Taani linna Aalborgi raadiojaama ilmateates. Lennukompanii pressiesindaja Epp Alatalu sõnul on firma Taanis reklaamimise põhjus see, et liinil Tallinn-Kopenhaagen sõitjate hulgas ei ole peaaegu üldse taanlasi

Noor eesti teater ja Noor-Eesti. Young Estonian Theatre and Young Estonia

Directory of Open Access Journals (Sweden)

Katri Aaslav-Tepandi

2012-04-01

Full Text Available This article begins by examining points of intersection between two professional theatres, ”Estonia” and ”Vanemuine” (both established in 1906, their young directors – Karl Menning, Paul Pinna, Theodor Altermann, and Karl Jungholz, and the literary movement Young Estonia. Subsequently, we will consider Young Estonia’s theatrical ideals and the influence of these ideas on later Estonian theatrical life. Since not much information has survived regarding direct personal contacts between ”movers and shakers” in the theatre world and Young Estonians, the main focus here shall be on indirect creative connections and influences. One such context is education: like the Young Estonians, theatre activists of the younger generation aspired to place themselves on the larger map of European culture. Thus, their artistic beliefs and goals shall be examined in relation to those of Young Estonians’ quest for modern culture. Pinna, Altermann, Menning, Jungholz, and others went on study tours to Germany and France, where they were energized and inspired by innovative German and Russian theatres, by naturalistic staging, and by psychological realism, both in acting and in performance style. Among their models were A. Antoine’s Théâtre- Libre in Paris, K. Stanislavski’s Art Theatre in Moscow, O. Brahm’s Lessing-Theater, and M. Reinhardt’s Deutsches Theater in Berlin. These models were likewise known to the Young Estonians, but if theatre activists oriented themselves more fundamentally to German naturalist and realist dramatic art, Young Estonians were more taken with ”theatrical theatre” with its symbolist and impressionist influences. The Young Estonians attended performances at both theatres, ”Vanemuine” and ”Estonia”, and wrote numerous theatre reviews. Yet in the Young Estonia albums (yearbooks and in the magazine Young Estonia, theatre topics have a relatively modest representation. Young Estonians did not have direct

Liberalism - Key to Entrepreneurial and Innovation Success: Estonian Case Study

Directory of Open Access Journals (Sweden)

Augustin Ignatov

2017-12-01

Full Text Available Since its independence in 1991 Estonia has successfully overpassed the challenges of the transition period being in the present of one the most technologically developed nations of Europe. The present research is intended to evaluate the relationship between Estonian pro-market regulation, entrepreneurship and innovation. In order to reach relevant conclusions in this regard there have been used both qualitative and quantitative methods of analysis. In such a way, it could be comprehensively reviewed the process of Estonian economic development from a relatively underdeveloped USSR republic to an advanced innovation driven economy. The results show that pro-market governmental regulation has favourably influenced Estonian entrepreneurship, while it fostered country’s innovation capacities. It has been concluded that the economic “miracle” of Estonia has been at a great extent determined by proper government regulation oriented towards economic liberalisation.

Efficiency of Estonian grain farms in 2000 2004

Directory of Open Access Journals (Sweden)

N. VASILIEV

2008-12-01

Full Text Available The aim of this study is to analyse the efficiency of Estonian grain farms after Estonia’s transition to a market economy and during the accession period to the European Union (EU. The non-parametric method Data Envelopment Analysis (DEA was used to estimate the total technical, pure technical and scale efficiency of Estonian grain farms in 2000–2004. Mean total technical efficiency varied from 0.70 to 0.78. Of the grain farms 62% are operating under increasing returns to scale. Solely based on the DEA model it is not possible to determine optimum farm scale and the range of Estonian farm sizes operating efficiently is extensive. The most pure technically efficient farms were the smallest and the largest but the productivity of small farms is low compared to larger farms because of their small scale. Therefore, they are the least competitive. Since pre-accession period to the EU, large input slacks of capital have replaced the former excessive use of labour and land. This raises the question about the effects on efficiency of the EU’s investment support schemes in new member states.;

The Category of Time in Fairy Tales: Searching for Folk Calendar Time in the Estonian Fairy Tale Corpus

Directory of Open Access Journals (Sweden)

Mairi Kaasik

2011-03-01

Full Text Available The article examines how folk calendar holidays are represented in Estonian fairy tales. It introduces some views presented in folklore studies about the concept of time in fairy tales and finds parallels with them in the Estonian context. The analysis relies on the digital corpus of Estonian fairy tales (5400 variants, created from the texts found in the Estonian Folklore Archives by the Fairy Tale Project of the Department of Estonian and Comparative Folklore, University of Tartu. Folk calendar holidays occur in Estonian fairy tales relatively seldom; most often these are holidays that occupy a significant place in the Estonian folk calendar (Christmas, St. John’s Day, Easter, St. George’s Day. Calendar holidays are notably mentioned more often in tale types which remain on the borderline between the fairy tale and the legend or the fairy tale and the religious tale. In Estonian fairy tales, calendar holidays are used on three levels of meaning: (1 the holiday is organically associated with the tale type; it has an essential role in the plot of the tale; (2 to a certain extent, the holiday could be replaced by another holiday having an analogous meaning; (3 the holiday forms an unimportant or occasional addition to the tale.

Olev Schults : SAS vajab Estonian Airi rahvusliku lennufirmana / Olev Schults ; interv. Andres Reimer

Index Scriptorium Estoniae

Schults, Olev

2008-01-01

Estonian Airi nõukogu esimees vastab küsimustele, kas SAS arendas Läti airBalticut Estonian SAS-i arvel, mis mõte on rahvuslikul lennukompaniil, kui riik ei tohi seda finantseerida, kuidas mõjutab investorite meeleolu SAS-i Eestis tabanud poliitikute kriitika tulv

Estonian Air to overhaul strategy / Matt Withers

Index Scriptorium Estoniae

Withers, Matt

2008-01-01

Estonian Air on majanduslikes raskustes, mida aitaks leevendada riigipoolne toetus. Majandus- ja kommunikatsiooniminister Juhan Parts leiab, et riik peaks omama lennufirma juhatuses esimehe kohta, et mõjutada rohkem vastuvõetavaid otsuseid ja investeeringuid

Resource and utilization of Estonian hydropower

International Nuclear Information System (INIS)

Raesaar, P.

2005-01-01

An overview of the Estonian hydropower resources and their utilization at present as well as prospective for the future are presented in this paper. A short overview of advantages of small hydropower stations and related issues is given. Some technological aspects are treated briefly. (authors)

Revisiting the Estonian Cyber Attacks: Digital Threats and Multinational Responses

Directory of Open Access Journals (Sweden)

Stephen Herzog

2011-01-01

Full Text Available In April 2007, the Estonian Government moved a memorial commemorating the Soviet liberation of the country from the Nazis to a less prominent and visible location in Tallinn. This decision triggered rioting among Russian-speaking minorities and cyber terrorism targeting Estonia's critical economic and political infrastructure. Drawing upon the Estonian cyber attacks, this article argues that globalization and the Internet have enabled transnational groups—such as the Russian diaspora—to avenge their grievances by threatening the sovereignty of nation-states in cyberspace. Sophisticated and virtually untraceable political "hacktivists" may now possess the ability to disrupt or destroy government operations, banking transactions, city power grids, and even military weapon systems. Fortunately, western countries banded together to effectively combat the Estonian cyber attacks and minimize their effects. However, this article concludes that in the age of globalization, interdependence, and digital interconnectedness, nation-states must engage in increased cooperative cyber-defense activities to counter and prevent devastating Internet attacks and their implications.

Compiling the Dictionary of Word Associations in Estonian: From scratch to the database

Directory of Open Access Journals (Sweden)

Ene Vainik

2018-04-01

Full Text Available The present paper describes the project titled “The Dictionary of Word Associations in Estonian” undertaken by the author at the Institute of the Estonian Language. The general aim of the Dictionary is to provide insights into Estonians’ common-sense mind. It is meant to be a tool of self-reflection for Estonian native speakers and a guide for the foreigners who are eager enough to make themselves familiar with the Estonian cultural patterns of thought. The Dictionary will be published online. The number of keywords was initially limited to approximately 800. Specific emphasis is given to the stage of data collection by implementing the principles of citizen science.

Estonian Air püüdis viimase hetkeni Top Toursi päästa / Mirko Ojakivi

Index Scriptorium Estoniae

Ojakivi, Mirko

2010-01-01

Estonian Air kaalus Top Toursile appiminekut, sest reisifirma oli Estonian Airil üks olulisemaid koostööpartnereid. Abi oleks puudutanud ennekõike uutele lendudele allahindluse tegemist, räägiti ka võimalikust krediidist

Jäätmetega kimpus Estonian Cell annab muda põldudele kompostiks / Ulvar Käärt

Index Scriptorium Estoniae

Käärt, Ulvar, 1982-

2007-01-01

Kundas asuv Estonian Celli tehas jagab ümberkaudsetele talunikele jäätmetest lahtisaamiseks kompostimissegu. Seadused ei sätesta, kuidas Estonian Cellis tekkivaid jäätmeid töödelda. Kommenteerib Peeter Eek: Aasta läbi ei saa muda põllule viia

The Woman as Wolf (AT 409: Some Interpretations of a Very Estonian Folk Tale

Directory of Open Access Journals (Sweden)

Merili Metsvahi

2013-12-01

Full Text Available The article analyses tale type The Woman as Wolf, which is one of the most popular folk tales in the Estonian Folklore Archives and is represented there both in the form of a fairy tale and in the form of a legend. The vast majority of the versions of The Woman as Wolf were written down in the first part of the 20th century within Estonia and where recorded from Estonians. The article introduces the content of the tale, the origin of the first records from the early 19th century, and the dissemination area of the tale, which remains outside Western Europe: apart from the Estonian versions there are Sami, Karelian, Vepsian, Livonian, Latvian, Lithuanian, Russian, Ukrainian and Belarusian versions. While in almost all the Estonian versions the main protagonist is transformed into a wolf, in most of the versions written down in other areas and ethnic groups, another animal or bird replaces the wolf. The author is of the opinion that the Finnic area is central to the distribution of the folk tale The Woman as Wolf. The animal the woman is transformed into in the plot would not have been a wolf in earlier times. The article provides an explanation why the wolf is predominant in Estonian written sources. For that purpose the ways in which the wolf and werewolf were perceived in earlier Estonian folk belief are introduced. At the end of the article interpretation of the folk tale is provided. The author states that the plot and some of the motifs found in this folk tale reflect the difficulties women had in submitting to the norms and values of patriarchal order within their society.

Estonian Golf & Country Club / Liina Jänes

Index Scriptorium Estoniae

Jänes, Liina, 1977-

2005-01-01

Estonian Golf & Country Club'i etnomodernistlik golfikeskus ja klubihoone Jõelähtmel. Projekteerija: Arhitektuuristuudio Siim & Kreis. Autor Andres Siim. Konstruktor: Resand. Sisekujundaja Juta Lember (SAB Lember & Padar). Projekt 2004, valmis 2005. Ill.: I ja II korruse plaan, 3 värv. välis ja 3 sisevaadet

Critical Success Factors and information needs in Estonian industry

Directory of Open Access Journals (Sweden)

Aiki Tibar

2002-01-01

Full Text Available The article reports the results of the study on the critical success factors and related information needs in Estonian industry conducted in 1999. Data were collected by interviews with 27 managers and engineers from 16 manufacturing companies in various industries. Most of the critical success factors taken up were related to marketing, information management, quality management, product development and technological innovations. The information needs of managers and engineers were related to competitors, customers, markets, technology, regulations, etc. Some identified CSFs expressed also priorities for development by Estonian economic authorities: to support the implementation of new technologies and introduction of quality management methods. The finding that information management was perceived as a very critical area supports the result of the recent Finnish study on CSFs.

Russian-Estonian Economic and Investment Cooperation During the Crisis: Dynamics and Possibilities

Directory of Open Access Journals (Sweden)

Nevskaya Anastasia

2015-06-01

Full Text Available The article deals with the development in Russian-Estonian relations during the crises of 2007 and 2014, taking into consideration the balance between political and economic factors in the decision-making by Estonian government. A number of special aspects, trends and problems in trade and investment ties are detected. The aim of the study is to uncover key motivation behind the actions of both Russia and Estonia, to identify the drivers for economic and political development in the region, and to work out recommendations to adjust them. The questions put forward by the authors of this article could not be more topical at the time, when Russian economic situation is obviously getting worse and capital flight (to the neighboring EU Member States is likely to increase. The method of the study is comparative analysis of the impact on economic ties made by Russian-Estonian crisis of 2007 and the current international tension around Ukraine. The regional fossil fuel market and the possibilities of Gazprom involvement in its development are also analyzed. It is concluded that political motives are still important for Estonian decisionmaking, though they are balanced out by measures of business support (despite some of these measures being taken by the EU bodies. The role of political factor for the Russian side is increasing. It is acknowledged that there is a growing number of missed economic opportunities in the Russian Northwest.

Overview of the Estonian Biofuels Association activities

International Nuclear Information System (INIS)

Hueues, Meelis

2000-01-01

Due to global warming and environment pollution because of widespread use of fossil fuels there are already tendencies to stabilize and decrease the consumption of these energy resources and take into use more renewable energy resources. Estonian Biofuels Association (EBA) is a non-profit association, which was founded on 8. of May 1998 in Tallinn. The EBA is an independent and voluntary alliance of its members. Fields of activity of the EBA are by biofuels research, developing and evaluation to engage environmental, biofuels and energy saving. EBA members are: energy consultants, scientists, as well as fuel suppliers, DH-companies, technology suppliers, energy service companies etc. The members of EBA are involved in different projects in Estonia, where biomass are produced and used for heating, where wood, waste, peat, rape oil and biogas resources are examined and put into use, and also projects which deal with energy saving and environment friendly equipment production for using biofuels. During our short experience we have noticed that people in Estonia have become more aware of biomass and their use, so the development of environment friendly and sustainable energetics will continue in Estonia. Available biofuels in Estonia could compete with fossil fuels if burnt rationally with high technology equipment. EBA members are convinced that biomass have perspective and that they could play an important role in improving Estonian economic and environmental situation. Modem biomass combustion devices are taken into use more the faster general wealth increases and EBA can raise people's awareness of bio fuel subject through special, courses and media. We want Estonian energy policy to develop towards widespread use of renewable energy resources, which would save energy and environment improve nation's foreign trade balance and create jobs mainly in rural areas

Estonian Perceptions of Security: Not Only About Russia and the Refugees

Directory of Open Access Journals (Sweden)

Veebel Viljar

2016-12-01

Full Text Available The current study focuses on the Estonian perceptions of security and on the defence situation both globally and locally. The dynamic results of the public opinion surveys on security risks conducted in Estonia over the last 10 years (2006-2016 will be presented. In addition, to understand whether some of the security risks could be over- or underestimated in Estonia, these results will be compared with the views expressed recently by the World Economic Forum, particularly the Global Risks Report 2016. Also, the arguments why some topics have played or are currently playing key role in the Estonian security perception will be presented and discussed.

The Rocky Road towards Professional Autonomy: The Estonian Journalists’ Organization in the Political Turmoil of the 20th Century

Directory of Open Access Journals (Sweden)

Epp Lauk

2017-09-01

Full Text Available This article attempts to explain the relationships between journalists, politics and the state from the perspective of collective autonomy, that of the professional organization of journalists. The case of Estonian Journalists’ Union demonstrates the complexity and historical contingency of professional autonomy of journalism. The development of the Estonian journalists’ organization occurred as a sequence of transformations from the Estonian Journalists’ Association to the Estonian Journalists’ Union to the Soviet type journalists’ union, and lastly to an independent trade union. This sequence was disrupted by several fatal breakdowns that changed not only the character of the association, but also professional values, the whole occupational ideology and the conditions of the existence of journalism as a profession in Estonia.

The Estonian study of Chernobyl cleanup workers. I. Introduction

International Nuclear Information System (INIS)

Rahu, Mati

1999-01-01

The most comprehensive epidemiological project ever performed in Estonia - The Estonian Study of Chernobyl Cleanup Workers - was the joint effort of researchers from Estonia, Finland and USA. Until September 1999, the results of this study were published in English only. To familiarize the readership of 'Eesti Arst' with the major study findings, the abridged versions of four original papers from 'Radiation Research' are presented in the current issue of the journal. For the Estonian epidemiologists, the work under this project that consists of eight sub projects was a real challenge. In the course of the study, skills were developed in writing a study protocol, preparing a questionnaire, progress reporting, documenting the structure of databases, record linkage, and problem solving. It was an exciting experience to work with top scientists like William Bigbee, John Boice, Timo Hakulinen, Ronald Jensen and Gayle Littlefield. (author)

Sustainable development outlooks of the Estonian energy sector for convergence with the European Union countries

International Nuclear Information System (INIS)

Laur, Anton; Tenno, Koidu; Soosaar, Sulev

2002-01-01

The article presents an overview of a research conducted in the Estonian Inst. of Economics and the Estonian Energy Research Inst. with the objectives to: analyse the dynamics of the main Estonian energy use indicators over the last 8-10 years with the background of general macroeconomics developments; compare these indicators with the respective energy indicators in the European Union Member States and Candidate Countries; evaluate Estonia's potential to catch up by the energy use efficiency (GDP energy intensity) of the average level of EU countries, modelling our possible development scenarios of GDP and TPES. The research results indicates several positive development tendencies (e.g. reduction of TPES and CO 2 emissions with the background of economic growth) in the Estonian energy sector, as well as convergence with the EU countries in terms of GDP energy intensity. Unfortunately, the model analysis results demonstrate that it takes a lot of time for Estonia to reach the current EU level - even under the most favourable GDP and TPES development conditions, 25-30 years. The primary reason is the very low level of our GDP per capita compared to the EU countries. (author)

Tabud ja reeglid. Sissevaateid eesti laagriromaani / Taboos and Rules. Insights into Prison Camp Novels by Estonian Writers

Directory of Open Access Journals (Sweden)

Anneli Kõvamees

2013-12-01

Full Text Available The article concentrates on Estonian novels depicting Soviet prison camps in the 1940s and 1950s. The goal is to map themes, motifs and characteristics in such novels, concentrating on various taboos and rules in the prison camp environment. For a long time the Soviet prison camp theme was not publicly discussed in Estonia due to political reasons. Texts dealing with prison camps could appear in print only outside the Soviet Union; the way Estonians saw these historical events and hellish experiences were depicted mostly in exile novels. Most notable are the novels by Arved Viirlaid (b. 1922, e.g., Kes tappis Eerik Hormi? (Who Killed Eerik Horm? (1974, Surnud ei loe (The Dead do not Read (1975, Vaim ja ahelad (Mind and Chains (1961. Estonian prison camp novels can be seen as “the literature of testimony”, to use the term by Leona Toker. Dramatic historical events are written down to record the events and to show the inhumane nature of Soviet society. These records of the dramatic past follow certain patterns and create certain self- and hetero-images. A prison camp is a closed territory within a closed territory; prison camps can be seen as small models of Soviet society. Prison camp novels give a detailed view of the environment of the prison camp, its inhabitants and activities. Two central aspects are labour and food; the life of the prisoner whirls around these. The most important thing is to survive, which often leads to moral decline, e.g., stealing, cheating. However, there are lines Estonians do not cross, e.g., cannibalism or homosexual relationships with superiors. Estonians are always depicted as political prisoners (not common criminals and heterosexuals, while Russians are portrayed mainly as criminals and often also as homosexuals. Another important component of the image of the Estonians is their enterprising spirit and ability to manage even under very difficult conditions. Therefore, several oppositions can be identified, e

Estonian Golf & Country Clubi klubihoone / Andres Siim, Alar Just

Index Scriptorium Estoniae

Siim, Andres

2005-01-01

Harjumaal Jõelähtme vallas rajab Estonian Golf & Country Club uut Jägala-Jõesuu spordi- ja puhkekeskust, mille südameks saab puidust golgiklubi hoone, mida tutvustavad klubihoone arhitekt ja üks inseneridest. Ill.: vaade ehitusele, projekti kaks vaadet, lõige

Value Education in Estonian Preschool Child Care Institutions

Science.gov (United States)

Ülavere, Pärje; Tammik, Anu

2017-01-01

For systematic implementation of value education in educational institutions, the national programme "Values Development in Estonian Society 2009-2013" (Ministry of Education and Research 2009) was prepared in Estonia. However, it was launched only in 2010, and the authors intended to ascertain the values of the heads of preschool child…

Estonian energy forest project

International Nuclear Information System (INIS)

Koppel, A.; Kirt, E.; Kull, K.; Lasn, R.; Noormets, A.; Roostalu, H.; Ross, J.; Ross, V.; Sulev, M.

1994-04-01

In February 1993 an agreement of Swedish-Estonian scientific co-operation on energy forest was signed. In may five energy forest plantations (altogether 2 ha) were established in Estonia with Swedish selected clones of Salix viminalis and Salix dasyclados. The research within this project is carried out within three main directions. The studies of basic ecophysiological processes and radiation regime of willow canopy will be carried out in Toravere. The production ecology studies, comparison of the productivity of multiple clones on different soil types is based on the plantations as vegetation filter for wastewater purification is studied on the basis of plantations in Vaeike-Maarja and Valga (author)

Estonian wind climate

International Nuclear Information System (INIS)

Kull, Ain

1999-01-01

Estonia is situated on the eastern coast of the Baltic Sea. This is a region with intensive cyclonic activity and therefore with a relatively high mean wind speed. Atmospheric circulation and its seasonal variation determine the general character of the Estonian wind regime over the Atlantic Ocean and Eurasia. However, the Baltic sea itself is a very important factor affecting wind climate, it has an especially strong influence on the wind regime in costal areas. The mean energy density (W/m 2 ) is a wind energy characteristic that is proportional to the third power of wind speed and describes energy available in a flow of air through a unit area. The mean energy density is a characteristic which has practical importance in regional assessment of snowdrift, storm damage and wind energy

Musical Practices and Methods in Music Lessons: A Comparative Study of Estonian and Finnish General Music Education

Science.gov (United States)

Sepp, Anu; Ruokonen, Inkeri; Ruismäki, Heikki

2015-01-01

This article reveals the results of a comparative study of Estonian and Finnish general music education. The aim was to find out what music teaching practices and approaches/methods were mostly used, what music education perspectives supported those practices. The data were collected using questionnaires and the results of 107 Estonian and 50…

Top 10 Estonian albums of 2004 / Igor Garshnek

Index Scriptorium Estoniae

Garšnek, Igor, 1958-

2004-01-01

Heliplaatidest: Arvo Pärt "Pro et contra", Various composers "Baltic Voices 2", Raimo Kangro "Displays", Toivo Tulev "Be Lost in the Call", Indrek Vau and Mati Mikalai "Estonian Trumpet Music", Erdmann/Sooäär "Dessert Time, Peer Gynt & Other Stories", Alo Mattiisen "50 parimat laulu", Riho Sibul "Must", Rein Rannap "Tantsib klaveril", Eesti Keeled "Kella tiksumist..."

Trace metal emissions from the Estonian oil shale fired power

DEFF Research Database (Denmark)

Aunela-Tapola, Leena A.; Frandsen, Flemming; Häsänen, Erkki K.

1998-01-01

Emission levels of selected trace metals from the Estonian oil shale fired power plant were studied. The plant is the largest single power plant in Estonia with an electricity production capacity of 1170 MWe (1995). Trace metals were sampled from the flue gases by a manual method incorporating...... in the flue gases of the studied oil shale plant contribute, however, to clearly higher total trace metal emission levels compared to modern coal fired power plants. Although the old electrostatic precipitators in the plant have been partly replaced by state-of-the-art electrostatic precipitators...... a two-fraction particle sampling and subsequent absorption of the gaseous fraction. The analyses were principally performed with ICP-MS techniques. The trace metal contents of Estonian oil shale were found to be in the same order of magnitude as of coal on average. The high total particle concentrations...

[Marge Rennit. Eesti muuseumid / Estonian museums] / Tapio Mäkeläinen

Index Scriptorium Estoniae

Mäkeläinen, Tapio

2009-01-01

Tutvustus: Eesti muuseumid = Estonian museums / [Eesti Muuseumiühing ; koostaja Marge Rennit ; tõlkija Tiina Mällo ; toimetaja Ivi Tammaru ; eessõna: Piret Õunapuu ; kujundaja Marek Allvee]. Tallinn : Oomen, 2008

Cancer incidence and thyroid disease among Estonian Chernobyl clean-up workers

Energy Technology Data Exchange (ETDEWEB)

Auvinen, A; Salomaa, S [eds.; Radiation and Nuclear Safety Authority, Helsinki (Finland); Rahu, M; Veidebaum, T; Tekkel, M [eds.; Inst. of Experimental and Clinical Medicine, Tallinn (Estonia); Hakulinen, T [ed.; Finnish Cancer Registry, Helsinki (Finland); Boice, Jr, J D [ed.; Int. Epidemiology Inst., MD (United States)

1998-09-01

The report describes the development and summarizes the results of the project Cancer incidence and thyroid disease among Estonian Chernobyl clean-up workers. One of the goals of the report is to give research protocols and questionnaires for researchers involved in other studies. Eight previously published articles are also included summarizing the results. The development of the collaboration work of the project is described in the introduction of the report. Epidemiological methods are described in an article complemented by the protocol and English version of the questionnaire administered to all cleanup workers, as well as the data collection form of the thyroid study. The results from biological biodosimetry using both glycophorin A and FISH methods have shown that the radiation doses received by the Chernobyl cleanup workers were relatively low. Thyroid nodularity was not associated with any radiation exposure characteristic in the thyroid screening study. Estonian Chernobyl cleanup workers were followed up for cancer incidence through the Estonian Cancer Registry. No cases of leukemia or thyroid cancer were observed by the end of 1993. It is too early to observe possible effect on other types of cancer. However, mortality from suicides was increased compared with general population. Further follow-up and the extension to other Baltic countries in the future will undoubtedly strengthen the study. There are also plans for future projects covering areas from psychosocial factors to radiation biology

MINORITY LANGUAGES IN ESTONIAN SEGREGATIVE LANGUAGE ENVIRONMENTS

Directory of Open Access Journals (Sweden)

Elvira Küün

2011-01-01

Full Text Available The goal of this project in Estonia was to determine what languages are spoken by students from the 2nd to the 5th year of basic school at their homes in Tallinn, the capital of Estonia. At the same time, this problem was also studied in other segregated regions of Estonia: Kohtla-Järve and Maardu. According to the database of the population census from the year 2000 (Estonian Statistics Executive Office's census 2000, there are representatives of 142 ethnic groups living in Estonia, speaking a total of 109 native languages. At the same time, the database doesn’t state which languages are spoken at homes. The material presented in this article belongs to the research topic “Home Language of Basic School Students in Tallinn” from years 2007–2008, specifically financed and ordered by the Estonian Ministry of Education and Research (grant No. ETF 7065 in the framework of an international study called “Multilingual Project”. It was determined what language is dominating in everyday use, what are the factors for choosing the language for communication, what are the preferred languages and language skills. This study reflects the actual trends of the language situation in these cities.

Problems of contemporary ecology. Temporal changes in Estonian nature and environment

International Nuclear Information System (INIS)

Frey, T.

1997-01-01

This conference was held 8-9 May 1997 at Tartu, Estonia. The proceedings of the 7. Estonian Conference in Ecology contain the results of mostly original research in environmental science, conservation and natural philosophy

Strategies for Estonian rural family enterprises. Eesti maapiirkonna pereettevõtete strateegia

Directory of Open Access Journals (Sweden)

Maret Kirsipuu

2013-01-01

Full Text Available The paper seeks to analyse family businesses in rural areas, family business strategies and re-registration of sole proprietors with the Centre of Registers and Information Systems (hereinafter Commercial Register in 2009, and to provide an overview of entrepreneurship policies targeted at Estonian rural businesses. Layoffs have increased the number of unemployed; some of those who have lost employment opt for social assistance benefits, but some others decide to become entrepreneurs. Many enterprising people in Estonia have set up a family enterprise, mainly in the sphere of services, agriculture and tourism. The Estonian entrepreneurship policy supports enterprising people and approves of entrepreneurship as a promoter of national economic development. One of the most positive qualities of family enterprises is their short decision-making chain, which ensures rapid implementation of the strategy.

Utilisation of Estonian energy wood resources

Energy Technology Data Exchange (ETDEWEB)

Muiste, P.; Tullus, H.; Uri, V. [Estonian Agricultural University, Tartu (Estonia)

1996-12-31

In the end of the Soviet period in the 1980s, a long-term energy programme for Estonia was worked out. The energy system was planned to be based on nuclear power and the share of domestic alternative sources of energy was low. The situation has greatly changed after the re-establishment of the Estonian independence, and now wood and peat fuels play an important role in the energy system. Energy consumption in Estonia decreased during the period 1970-1993, but this process has less influenced the consumption of domestic renewable fuels - peat and wood. It means that the share of these fuels has grown. The investment on substitution of imported fossil fuels and on conversion of boiler plants from fossil fuels to domestic fuels has reached the level of USD 100 million. The perspectives of the wood energy depend mainly on two factors; the resources and the price of wood energy compared with other fuels. The situation in wood market influences both the possible quantities and the price. It is typical that the quickly growing cost of labour power in Estonia is greatly affecting the price of energy wood. Though the price level of fuel peat and wood chips is lower than the world market price today, the conditions for using biofuels could be more favourable, if higher environmental fees were introduced. In conjunction with increasing utilisation of biofuels it is important to evaluate possible emissions or removal of greenhouse gases from Estonian forests 3 refs.

Utilisation of Estonian energy wood resources

Energy Technology Data Exchange (ETDEWEB)

Muiste, P; Tullus, H; Uri, V [Estonian Agricultural University, Tartu (Estonia)

1997-12-31

In the end of the Soviet period in the 1980s, a long-term energy programme for Estonia was worked out. The energy system was planned to be based on nuclear power and the share of domestic alternative sources of energy was low. The situation has greatly changed after the re-establishment of the Estonian independence, and now wood and peat fuels play an important role in the energy system. Energy consumption in Estonia decreased during the period 1970-1993, but this process has less influenced the consumption of domestic renewable fuels - peat and wood. It means that the share of these fuels has grown. The investment on substitution of imported fossil fuels and on conversion of boiler plants from fossil fuels to domestic fuels has reached the level of USD 100 million. The perspectives of the wood energy depend mainly on two factors; the resources and the price of wood energy compared with other fuels. The situation in wood market influences both the possible quantities and the price. It is typical that the quickly growing cost of labour power in Estonia is greatly affecting the price of energy wood. Though the price level of fuel peat and wood chips is lower than the world market price today, the conditions for using biofuels could be more favourable, if higher environmental fees were introduced. In conjunction with increasing utilisation of biofuels it is important to evaluate possible emissions or removal of greenhouse gases from Estonian forests 3 refs.

The problems and development potential of revenue autonomy in Estonian municipalities. Kohalike omavalitsuste tuluautonoomia probleemid ja arenguvõimalused Eestis

Directory of Open Access Journals (Sweden)

Janno Reiljan

2013-01-01

Full Text Available In a regionally heterogeneous country like Estonia, it is a difficult task to create a local government revenue structure that guarantees even supply of public services across the entire country and, at the same time, revenue autonomy for the municipalities. In the theoretical part of the current article the suitability of different sources of own revenues are analysed in the context of Estonian municipalities. The empirical part of the article compares the financing principles of Estonian municipalities with other EU countries. Finally, the proportions of different own sources of revenues in the budgets of Estonian local governments are examined and suggestions are made for changing the current system

Alberta's Estonians 1899 - Present TLÜ Akadeemilises Raamatukogus / Sander Jürisson

Index Scriptorium Estoniae

Jürisson, Sander

2014-01-01

Tallinna Ülikooli Akadeemilises Raamatukogus on üleval näitus "Alberta's Estonians 1899 - Present", mis annab ülevaate Kanada Alberta provintsi eestlaste loost. Näitus valmis Alberta Eesti Kultuuripärandi Seltsi koostöös Alberta Provintsi Arhiivi Kultuuripärandi Osakonnaga Edmontonis

Estonian Leader's Freedom Call Creates Storm / Anna Smolchenko

Index Scriptorium Estoniae

Smolchenko, Anna

2008-01-01

President Toomas Hendrik Ilvese esinemisest soome-ugri rahvaste maailmakongressil Hantõ-Mansiiskis, kohtumisest Venemaa presidendi Dmitri Medvedeviga, Eesti delegatsiooni saalist väljamarssimisest Venemaa riigiduuma väliskomisjoni esimehe Konstantin Kossatshovi sõnavõtu ajal. Ilmunud ka: St. Petersburg Times 1. juuli 2008, pealk.: Estonian Leader's Freedom Call Creates Controversy (lüh.). Vabariigi President töövisiidil Venemaal 27.-30.06.2008

Smoking habits and attitudes towards smoking among Estonian physicians.

Science.gov (United States)

Pärna, K; Rahu, K; Rahu, M

2005-05-01

This study examined the smoking habits and attitudes towards smoking among Estonian physicians. Cross-sectional data for 2668 physicians were gathered by a self-administered postal survey. The current smoking prevalence was 24.9% for male physicians and 10.8% for female physicians. The percentages of ex-smokers were 32.9 and 16.8%, respectively. Smoking prevalence among physicians was below the levels reported for the highest educational bracket of the total population in Estonia. Non-smoking physicians had more unfavourable views towards smoking than those who smoked. The majority of physicians were aware of the association between smoking and various diseases, with significant differences between smokers and non-smokers. Non-smoking physicians were more active in asking patients about smoking habits than those who smoked. Most Estonian physicians, especially those who smoked, failed to perceive themselves as positive role models. This study found a lower prevalence of smoking among physicians compared with the general population, and demonstrated the impact of personal smoking on physicians' attitudes towards smoking. The results provide an important challenge to medical education in Estonia.

Exhibition of photography from the Estonian diaspora / Ellu Maar

Index Scriptorium Estoniae

Maar, Ellu, 1982-

2010-01-01

Näitus "Photography from the Estonian Diaspora / Väliseesti foto" Kumu Kunstimuuseumis 8.10.-19.11.2010, kuraatorid Eha Komissarov ja Ellu Maar. Näitus tutvustas 1944. a. Eestist lahkunud või juba võõrsil sündinud fotograafide (Eric Soovere, Karl Hintzer, Priit Vesilind, Rein Välme jt.) loomingut ja valikut väliseesti fotoarhiividest

Estonian Airi ümber käib lehmakauplemine / Tõnu Lilleorg

Index Scriptorium Estoniae

Lilleorg, Tõnu

2008-01-01

Skandinaavia lennukompanii SAS saatis Eesti valitsusele kirja, milles teatab, et on nõus raskustes Estonian Airile lisainvesteeringuid tegema vaid siis, kui riik müüb SAS-ile oma osaluse, 34%. Vt. samas: SAS ei taha lennufirma eest maksta üle 150 miljoni. Diagramm: Majandusnäitajad, omanikud

Spatial patterns of soil organic carbon stocks in Estonian arable soils

Science.gov (United States)

Suuster, Elsa; Astover, Alar; Kõlli, Raimo; Roostalu, Hugo; Reintam, Endla; Penu, Priit

2010-05-01

Soil organic carbon (SOC) determines ecosystem functions, influencing soil fertility, soil physical, chemical and biological properties and crop productivity. Therefore the spatial pattern of SOC stocks and its appropriate management is important at various scales. Due to climate change and the contribution of carbon store in the soils, the national estimates of soil carbon stocks should be determined. Estonian soils have been well studied and mapped at a scale 1:10,000. Previous studies have estimated SOC stocks based on combinations of large groups of Estonian soils and the mean values of the soil profile database, but were not embedded into the geo-referenced databases. These studies have estimated SOC stocks of Estonian arable soils 122.3 Tg. Despite of available soil maps and databases, this information is still very poorly used for spatial soil modelling. The aim of current study is to assess and model spatial pattern of SOC stocks of arable soils on a pilot area Tartu County (area 3089 sq km). Estonian digital soil map and soil monitoring databases are providing a good opportunity to assess SOC stocks at various scales. The qualitative nature of the initial data from a soil map prohibits any straightforward use in modelling. Thus we have used several databases to construct models and linkages between soil properties that can be integrated into soil map. First step was to reorganize the soil map database (44,046 mapping units) so it can be used as an input to modelling. Arable areas were distinguished by a field layer of Agricultural Registers and Information Board, which provides precise information of current land use as it is the basis of paying CAP subsidies. The estimates of SOC content were found by using the arable land evaluation database of Tartu from the Estonian Land Board (comprising 950 sq km and 31,226 fields), where each soil type was assessed separately and average SOC content grouped by texture was derived. SOC content of epipedon varies in

Comparison of knowledge, attitudes and behaviour regarding smoking among Estonian and Finnish physicians.

Science.gov (United States)

Pärna, Kersti; Rahu, Kaja; Barengo, Noël C; Rahu, Mati; Sandström, Patrick H; Jormanainen, Vesa J; Myllykangas, Markku T

2005-01-01

To compare smoking behaviour, attitudes and opinions towards smoking and smoking cessation among Estonian and Finnish physicians. A cross-sectional postal survey using a self-administered questionnaire was carried out among 2,480 Estonian and 2,075 Finnish physicians. Daily smoking prevalence was higher among Estonian physicians than among their Finnish counterparts in both male (18.6% and 6.7%) and female (6.6% and 3.6%). Compared to Estonia, physicians in Finland more often agreed that smoking is very harmful to their health, that trying to convince people to stop smoking is their responsibility and that smoking prevention should be part of the normal and special training of health professionals. In both countries, non-smoking physicians held more unfavourable attitudes towards smoking than those who were smoking. Physicians' own smoking patterns and quitting behaviour are important because physicians serve as models for their patients and play a key role in the reinforcement of smoke-free health facilities. These results remain a challenge to medical educators, especially in Estonia. Estonia needs to improve medical education in terms of motivating physicians to ask about the smoking patterns of their patients and of training medical students and resident physicians to counsel their patients to stop smoking.

Az észt névtervezés az észt nyelvpolitikai modell tükrében [The name management in the mirror of the Estonian LPP-model

OpenAIRE

Pomozi, Péter; Földesi, Eszter

2016-01-01

The Estonian model of language planning and policy, which has been serving the development and protection of the Estonian language in its current form since 2004, is one of the most successful of such strategies in Europe. It owes it success to the broad social and scientific consensus reached in questions of language policy, regardless of changes in government. The Development Plan of the Estonian Language divides Estonian language planning and policy into three parts: status planning, corpu...

Identity and Othering in Past and Present: Representations of the Soviet Era in Estonian Post-Soviet Textbooks

Directory of Open Access Journals (Sweden)

Katrin Kello

2018-02-01

Full Text Available This paper analyses representations of the ‘core Soviet era’ (1945-1985 in Estonian post-Soviet history textbooks (1989-2016. Attitudes towards the Soviet system have been a rich resource for identity building, and hence a powerful political tool across the whole of the post-Soviet block. Based on an analysis of sections about the Soviet era in Estonia in 21 textbooks, the paper takes a look at how textbooks reflect broader processes of social meaning making, identity building and othering after a profound social and political turn. In 1989 and during the early 1990s, perspectives and narratives in Estonian history textbooks were closely related to social memory and national politics, enacting a specific social representation of the Soviet era that dominated the Estonian-speaking public space during the 1990s. The Soviet era, Russia and local Russians became the main Others for Estonia and Estonians. Over time, public discourse has diversified. The national curriculum and textbooks, however, still maintain the canon that formed in 1990s and thus reflect earlier sentiments. Apart from the increasing salience of Soviet-era daily life in more recent textbooks, the thematic choices and emphases have changed little since the 1990s. Therefore, even if the style of writing has ‘cooled down’, issues of identity preservation, resistance and accommodation, together with a saliently negative representation of wrongdoings by the Soviet system, still prevail. On the one hand, this testifies to the resilience of an established tradition in the textbook genre in general. On the other hand, it reflects the dominance of an ethnocentric tradition in Estonian history textbook writing. The paper discusses the implications of these findings for interethnic relations in Estonia.

Development of a breeding objective for Estonian Holstein cattle

Directory of Open Access Journals (Sweden)

E. PÄRNA

2008-12-01

Full Text Available Economic weights for milk carrier (water plus lactose, fat and protein yields, calving interval, age at first service, interval between the first service and conception of heifers and length of productive life of Estonian Holsteins were estimated under assumed milk production quota and for non-quota conditions. A bio-economic model of an integrated production system of a closed herd was used. Economic values of milk carrier yield and length of productive life differed between quota and non-quota conditions, but there were only minor differences between those marketing systems in economic values for functional traits. The standardised economic values of the most important traits varied in magnitude between18 to 81% of the economic value for milk yield. Discounting had a substantial impact on the economic value of length of productive life. When defining the breeding objective for Estonian Holstein, the interval between the first service and conception of heifers, and the length of productive life should be included in the breeding goal along with the traits with the highest economic value, milk, fat and protein yield. In the optimum breeding objective, relative weights of production vs. functional traits were 79 and 21%, respectively.;

Trends in smoking behaviour among Estonian physicians in 1982-2014.

Science.gov (United States)

Pärna, Kersti; Põld, Mariliis; Ringmets, Inge

2017-07-25

Smoking surveys among physicians have proved useful in highlighting the importance of physicians as healthy life style exemplars and role models in tobacco control and smoking cessation. The aim of this study was to give an overview of smoking behaviour among Estonian physicians from 1982 to 2014. Three cross-sectional postal surveys using a self-administered questionnaire were carried out among all practising physicians in Estonia. The number of physicians participating in this study was 3786 in 1982, 2735 in 2002, and 2902 in 2014. Data analysis involved calculating the age-standardized prevalences of smoking, prevalences of smoking by age group and mean age of smoking initiation. A non-parametric test for trend was used to assess significant changes in smoking over time. Age-standardized prevalence of current smoking among men was 39.7% in 1982, 20.9% in 2002, and 14.3% in 2014 and among women 12.2%, 8.0%, and 5.2%, respectively (p smoking among men and women was in age groups under 35 (from 55.2% to 16.7% and from 16.7% to 2.8%, respectively) and 35-44 (from 47.1% to 8.3% and from 19.5% to 5.1%, respectively) (p smoking initiation decreased from 20.4 to 19.3 among men and from 24.5 to 20.4 among women over the study period. In 1982-2014, smoking prevalence among Estonian physicians declined substantially. This may influence the willingness of society to recognize the health consequences of smoking which could give a support to the decline of the smoking epidemic in the country. Differences between smoking among male and female physicians persisted over the study period, but mean age of smoking initiation decreased. A further decline in smoking among Estonian physicians should be encouraged by special efforts targeted at physicians.

Field trial on glucose-induced insulin and metabolite responses in Estonian Holstein and Estonian Red dairy cows in two herds

Directory of Open Access Journals (Sweden)

Kaart Tanel

2010-01-01

Full Text Available Abstract Background Insulin secretion and tissue sensitivity to insulin is considered to be one of the factors controlling lipid metabolism post partum. The objective of this study was to compare glucose-induced blood insulin and metabolite responses in Estonian Holstein (EH, n = 14 and Estonian Red (ER, n = 14 cows. Methods The study was carried out using the glucose tolerance test (GTT performed at 31 ± 1.9 days post partum during negative energy balance. Blood samples were obtained at -15, -5, 5, 10, 20, 30, 40, 50 and 60 min relative to infusion of 0.15 g/kg BW glucose and analysed for glucose, insulin, triglycerides (TG, non-esterified fatty acids (NEFA, cholesterol and β-hydroxybutyrate (BHB. Applying the MIXED Procedure with the SAS System the basal concentration of cholesterol, and basal concentration and concentrations at post-infusion time points for other metabolites, area under the curve (AUC for glucose and insulin, clearance rate (CR for glucose, and maximum increase from basal concentration for glucose and insulin were compared between breeds. Results There was a breed effect on blood NEFA (P P P P P P th min nadir (P th min postinfusion (P Conclusion Our results imply that glucose-induced changes in insulin concentration and metabolite responses to insulin differ between EH and ER dairy cows.

Organizational Commitment in Estonian University Libraries: A Review and Survey

Science.gov (United States)

Kont, Kate-Riin; Jantson, Signe

2014-01-01

The data used in this article is based on the reviewing of relevant literature to provide an overview of the concepts of organizational commitment, job security, and interpersonal relations, as well as on the results of the original online survey, conducted by the article's authors, held in 2012 in Estonian university libraries governed by public…

Estonian folk traditional experiences on natural anticancer remedies: from past to the future.

Science.gov (United States)

Sak, Katrin; Jürisoo, Kadi; Raal, Ain

2014-07-01

Despite diagnostic and therapeutic advancements, the burden of cancer is still increasing worldwide. Toxicity of current chemotherapeutics to normal cells and their resistance to tumor cells highlights the urgent need for new drugs with minimal adverse side effects. The use of natural anticancer agents has entered into the area of cancer research and increased efforts are being made to isolate bioactive products from medicinal plants. To lead the search for plants with potential cytotoxic activity, ethnopharmacological knowledge can give a great contribution. Therefore, the attention of this review is devoted to the natural remedies traditionally used for the cancer treatment by Estonian people over a period of almost 150 years. Two massive databases, the first one stored in the Estonian Folklore Archives and the second one in the electronic database HERBA ( http://herba.folklore.ee/ ), containing altogether more than 30 000 ethnomedicinal texts were systematically reviewed to compile data about the Estonian folk traditional experiences on natural anticancer remedies. As a result, 44 different plants with potential anticancer properties were elicited, 5 of which [Angelica sylvestris L. (Apiaceae), Anthemis tinctoria L. (Asteraceae), Pinus sylvestris L. (Pinaceae), Sorbus aucuparia L. (Rosaceae), and Prunus padus L. (Rosaceae)] have not been previously described with respect to their tumoricidal activities in the scientific literature, suggesting thus the potential herbal materials for further investigations of natural anticancer compounds.

HIV testing and counselling in Estonian prisons, 2012 to 2013: aims, processes and impacts.

Science.gov (United States)

Kivimets, K; Uuskula, A

2014-11-27

We present data from an observational cohort study on human immunodeficiency virus (HIV) prevention and control measures in prisons in Estonia to assess the potential for HIV transmission in this setting. HIV testing and retesting data from the Estonian prison health department were used to estimate HIV prevalence and incidence in prison. Since 2002, voluntary HIV counselling and testing has routinely been offered to all prisoners and has been part of the new prisoners health check. At the end of 2012, there were 3,289 prisoners in Estonia, including 170 women: 28.5% were drug users and 15.6% were infected with HIV. Of the HIV-positive inmates, 8.3% were newly diagnosed on prison entry. In 2012, 4,387 HIV tests (including retests) were performed in Estonian prisons. Among 1,756 initially HIV-negative prisoners who were in prison for more than one year and therefore tested for HIV twice within 12 months (at entry and annual testing), one new HIV infection was detected, an incidence of 0.067 per 100 person-years (95% confidence interval (CI): 0.025–5.572). This analysis indicates low risk of HIV transmission in Estonian prisons. Implementation of HIV management interventions could impact positively on the health of prisoners and the communities to which they return.

[Pärtel Lippus. The acoustic features and perception of the Estonian quantity system] / Stefan Werner

Index Scriptorium Estoniae

Werner, Stefan

2012-01-01

Arvustus: Pärtel Lippus. The acoustic features and perception of the Estonian quantity system. Tartu : Tartu University Press, 2011. (Dissertationes philologiae estonicae Universitatis Tartuensis ; 29)

Eesti autobiograafilise kirjutuse kujunemisest 18. sajandist Teise maailmasõjani. The Development of Estonian Autobiographical Writing from the 18th Century to the Second World War

Directory of Open Access Journals (Sweden)

Rutt Hinrikus

2012-04-01

Full Text Available In this article I examine the development of Estonian autobiographical writing from its first manifestations to published memoirs, and the development of life writing and its diversification. The beginnings of life writing can be traced back to Estonian folk song and Estonian incidental poetry. The Moravian Brethren movement in Estonia in the 18th century promoted the spread of canonical autobiography. The Moravian Brethren offered alternative opportunities for self-realisation for Estonians who were serfs, and were therefore popular with the people. The practice of the Moravian Brethren made use of retelling and writing about the life of the congregation members, which sometimes became suitable biographies in print, especially stories of awakening. Several manuscript biographies have survived from the Brethren times, such as the biographies of Mäletu Jaan and Mihkel Sarapuu. In addition to the history of the Moravian Brethren movement, these biographies give information about the educational situation and living conditions of the people of the time. The Estonian life writing tradition emerged within the reigning Baltic German cultural space thanks to the Estophiles among the Baltic Germans (J. H. Rosenplänter and the first Estonian men of letters; from the early 19th century we have the diary by Rosenplänter, an estophile pastor from Pärnu, and the diary by the Estonian poet, the then-student Kristjan Jaak Peterson, both in the Estonian language. Johann Voldemar Jannsen, the founder of Estonian-language journalism, kept a diary in the German language for a longer period of time; it was usual that the first Estonian intellectuals (Lilli Suburg, and others in the late 19th century wrote in German. Admittedly, the first Estonian-language life history was written by a forward-looking 19th century peasant named Märt Mitt (1833-1912, who was conscious of himself as a historical subject and gave his memoirs, begun in the 1880s, a memorable title

Estonian Cell peab suu kasumist puhtaks pühkima / Kaisa Tahlfeld, Katre Pilvinski

Index Scriptorium Estoniae

Tahlfeld, Kaisa

2008-01-01

Estonian Cell saatis valitsusele pöördumise, milles palutakse teha parandusi elektrienergiaga seonduvates seadustes, mis aitaksid ettevõtet energia hinnatõusu ajal. Elektri hinnatõusu tõttu on muutunud küsitavaks ka Nitroferti tehase edasine eksisteerimine

Serological evidence of exposure to globally relevant zoonotic parasites in the Estonian population

DEFF Research Database (Denmark)

Lassen, Brian; Janson, Marilin; Viltrop, Arvo

2016-01-01

We investigated Estonian population and its selected subgroups for serological evidence of exposure to Ascaris lumbricoides, Echinococcus spp., Taenia solium, Toxocara canis, Toxoplasma gondii, and Trichinella spiralis. Serum samples from 999 adults representing general population, 248 children a...

Acquisition of noun derivation in Estonian and Russian L1

Directory of Open Access Journals (Sweden)

Reili Argus

2018-04-01

Full Text Available Acquisition of derivation is not a well-studied area in first language research and a comparative approach to the acquisition of derivation in different languages doesn’t exist. There is no information on how a child acquires derivation in a language with a rich and regular system of derivational patterns, or in a language where derivation is productive, but the system of derivational patterns is opaque. According to general ideas of complexity in a language, the child should start to use simplex stems first and, only after that, complex ones, that is, complexity should increase in the course of acquisition. Our paper is intended to address these issues, based on longitudinal child data from typologically different languages, Estonian and Russian. The results revealed significant differences in the acquisition of noun derivation in the two languages under observation. The system of noun derivation is acquired at a faster pace in Russian, while Estonian children have far fewer noun derivatives in their speech and they use different derivation suffixes with less regularity. Even so, the so-called building block model may be applied for both languages only partially.

Tiger in Focus--A National Survey of ICT in Estonian Schools

Science.gov (United States)

Toots, Anu; Laanpere, Mart

2004-01-01

Estonia has not participated in international studies of ICT in education, nor have there been any similar studies at the national level up until the year 2000. The first survey of ICT in Estonian schools was conducted after completion of the national school computerization programme called Tiger Leap. This paper focuses on the targeted responses…

Consumer Socialisation and Value Orientations among Estonian and Chinese Young People

Science.gov (United States)

Waerdahl, Randi; Kalmus, Veronika; Keller, Margit

2011-01-01

This paper asks if Estonian and Chinese tweens' access to pocket money influences their brand valuation, as well as value orientations in the context of perceived peer popularity and personal well-being. Surveys conducted in autumns 2006 (China n = 188) and 2007 (Estonia n = 111) show an inherent cultural resistance among tweens in both countries…

Az észt névtervezés az észt nyelvpolitikai modell tükrében [The name management in the mirror of the Estonian LPP-model

Directory of Open Access Journals (Sweden)

Pomozi, Péter

2016-12-01

Full Text Available The Estonian model of language planning and policy, which has been serving the development and protection of the Estonian language in its current form since 2004, is one of the most successful of such strategies in Europe. It owes it success to the broad social and scientific consensus reached in questions of language policy, regardless of changes in government. The Development Plan of the Estonian Language divides Estonian language planning and policy into three parts: status planning, corpus planning and prestige planning. Name management is a part of corpus planning, although certain aspects are also connected to legal and prestige planning. Name management strategies are present in all components of the Estonian model of language planning and policy, as linguistically appropriate name use is not only a socio-cultural, but economic question, as informative and easy to understand names contribute to measurable economic advantages. The paper mainly demonstrates the dilemmas and answers of Estonian name management through examples from personal name giving practices, but questions concerning the problems of name use in a multicultural environment and the difficulties of place name and firm name management are also discussed.

Väärikas Estonian Air jäi kampaaniaga hätta / Alyona Stadnik

Index Scriptorium Estoniae

Stadnik, Alyona

2010-01-01

Estonian Air müüs veebikaupluse cherry.ee kaudu soodsaid kinkekaarte. Vastuolu tekkis asjaolust, et nõudlus kinkekaartide järele oli suurem kui pakkumine. Lennukompanii katkestas soodsate kinkekaartide müügi

Field of genes: the politics of science and identity in the Estonian Genome Project.

Science.gov (United States)

Fletcher, Amy L

2004-04-01

This case study of the Estonian Genome Project (EGP) analyses the Estonian policy decision to construct a national human gene bank. Drawing upon qualitative data from newspaper articles and public policy documents, it focuses on how proponents use discourse to link the EGP to the broader political goal of securing Estonia's position within the Western/European scientific and cultural space. This dominant narrative is then situated within the analytical notion of the "brand state", which raises potentially negative political consequences for this type of market-driven genomic research. Considered against the increasing number of countries engaging in gene bank and/or gene database projects, this analysis of Estonia elucidates issues that cross national boundaries, while also illuminating factors specific to this small, post-Soviet state as it enters the global biocybernetic economy.

Estonian Business Schooli magistriharidus nüüd ka koju kätte / Madis Habakuk

Index Scriptorium Estoniae

Habakuk, Madis

2007-01-01

Sügisest hakkab Estonian Business School koos Mainori Kõrgkooliga pakkuma magistriõpet majandushariduseta inimestele, kus soovijatel on võimalus õppida EBSi Master of Business Administration programmi järgi

The Role of Language in (Recreating Tatar Diaspora Identity: The Case of the Estonian Tatars

Directory of Open Access Journals (Sweden)

Maarja Klaas

2015-06-01

Full Text Available This paper focuses on the meanings assigned to Tatar language among the Tatar diaspora in Estonia. According to interviews with Estonian Tatars as well as descriptions of field material from Tatarstan, language is an important aspect of Tatar ethnic identity. This paper will track common discourses about the Tatar language and the way it is connected to Tatar ethnic identity. Issues concerning Tatar language are used to demonstrate various ways of enacting Tatarness in Estonia. It is shown that Estonian Tatars worry about the vitality and purity of Tatar language, but for some, marginalization of dialects is also an issue. People categorized with the same identity labels by self and others can experience and enact their Tatarness in a variety of different ways.

E-Banking: Risk Management Practices of the Estonian Banks

OpenAIRE

Dmitri Sokolov

2007-01-01

During the last years the development of e-banking in Estonia has been very significant. According to the report of the World Economic Forum, the Estonian IT-development has been substantial. The success of e-banking in Estonia can be compared to the corresponding success of the Nordic countries. According to the Deutsche Bank Research, around 70-80% of the Internet users in Estonia use Internet banking and in this respect, Estonia could be compared to Finland, Norway and Iceland. Despite of ...

Estonian Vocational Teachers' Attitudes towards Inclusive Education for Students with Special Educational Needs

Science.gov (United States)

Rose, Richard; Kaikkonen, Leena; Koiv, Kristi

2007-01-01

This paper presents the findings from research conducted with two samples of teachers from Estonian Vocational Schools. The first sample comprised a group of teachers who had received professional development directly related to the management of students with special educational needs in vocational education settings. Their attitudes and…

Isamaalaulud ja okupatsioonirežiim – nostalgia, utoopia ja reaalsus. Estonian Patriotic Songs and the Occupational Regime – Nostalgia, Utopia and Reality

Directory of Open Access Journals (Sweden)

Kanni Labi

2012-04-01

Full Text Available Estonian knowledge of history emanates from the fact that constituting an independent nation has for the most part been nothing but a utopia, and was a reality for a relatively short time. When it comes to selfidentification though, the expression ’a singing people’ is often used by the Estonians to describe themselves. Nostalgia for freedom is reflected in the Estonian culture of almost all periods and is carried on by the singing tradition, where patriotic songs emerge independent of different musical tastes within a particular generation and form an important part of a common Estonian repertoire. Patriotic songs occupy a central place in several fields of Estonian culture: besides music culture also in popular culture,and literary history – the works of poetry which have gained the most popularity are those which when put to music have been the most widely spread among the people. The main part of the most popular Estonian patriotic songs are choral songs from the national awakening at the end of the 19th century. Despite the national programmes aiming to wipe out ‘bourgeois nationalism’, they were sung at the song festivals in the Soviet era and were published in song books, expressing the people’s nostalgia for freedom lost. After the end of the Second World War, there was an attempt at launching a kind of patriotic new creation, where patriotism was merged with Soviet pathos; the aim was to show that the people’s utopia was in fact communism, but not a single one of those songs made it into the people’s common repertoire. Only the patriotic songs composed in the 1980s during the so-called new national awakening reached a popularity comparable to that of the old songs. The discourse on ’Estonianness’ and the shaping of a matching repertoire under imperial Russian rule took place under very different circumstances than its preservation and development in the second half of the 20th century under Soviet occupation, but

Mutational analysis of COL1A1 and COL1A2 genes among Estonian osteogenesis imperfecta patients.

Science.gov (United States)

Zhytnik, Lidiia; Maasalu, Katre; Reimann, Ene; Prans, Ele; Kõks, Sulev; Märtson, Aare

2017-08-15

Osteogenesis imperfecta (OI) is a rare bone disorder. In 90% of cases, OI is caused by mutations in the COL1A1/2 genes, which code procollagen α1 and α2 chains. The main aim of the current research was to identify the mutational spectrum of COL1A1/2 genes in Estonian patients. The small population size of Estonia provides a unique chance to explore the collagen I mutational profile of 100% of OI families in the country. We performed mutational analysis of peripheral blood gDNA of 30 unrelated Estonian OI patients using Sanger sequencing of COL1A1 and COL1A2 genes, including all intron-exon junctions and 5'UTR and 3'UTR regions, to identify causative OI mutations. We identified COL1A1/2 mutations in 86.67% of patients (26/30). 76.92% of discovered mutations were located in the COL1A1 (n = 20) and 23.08% in the COL1A2 (n = 6) gene. Half of the COL1A1/2 mutations appeared to be novel. The percentage of quantitative COL1A1/2 mutations was 69.23%. Glycine substitution with serine was the most prevalent among missense mutations. All qualitative mutations were situated in the chain domain of pro-α1/2 chains. Our study shows that among the Estonian OI population, the range of collagen I mutations is quite high, which agrees with other described OI cohorts of Northern Europe. The Estonian OI cohort differs due to the high number of quantitative variants and simple missense variants, which are mostly Gly to Ser substitutions and do not extend the chain domain of COL1A1/2 products.

Radon in Estonian buildings. Establishment of a measurement system and obtained results

International Nuclear Information System (INIS)

Pahapill, L.; Rulkov, A.; Swedjemark, G.A.

1996-12-01

One purpose of this project was the establishment of a radon monitoring programme inside the state environmental monitoring programme. Another purpose was to investigate regions, expected to have high radon levels indoors. A new method for the long-term measurement of indoor radon was established and the staff for these measurements was trained. The results of the measurement can be used by Estonian decision-makers to work out rules and standards. There is no legislative act in the field of radiation in Estonian at this time. To summarize the results of the measurements we can say that indoor radon concentrations vary by region. The radon investigations must be continued to identify the risk areas and types of housing construction. The results of the state radon monitoring are provided to the municipalities, who advice the owners of planned new houses to select the right construction for the house. A new project will follow with an investigation of radon in randomly selected dwellings, training and equipment for radon measurement in soil, and general advice with regard to radon, as well as assistance in preparing information about radon. 7 refs, 5 figs

The Perceived Impact of External Evaluation: The System, Organisation and Individual Levels-Estonian Case

Science.gov (United States)

Seema, Riin; Udam, Maiki; Mattisen, Heli; Lauri, Liia

2017-01-01

The purpose of this article is to provide an overview of how the employees of higher education institutions perceive the impact of external evaluations. The study was conducted using the concurrent mixed method and involved 361 employees from Estonian universities and professional higher education institutions. The results indicated that…

Assessment of the Estonian Research Development Technology and Innovation Funding System

OpenAIRE

Nedeva, Maria; Georghiou, Luke

2003-01-01

The objectives of the assessment of the RDTI funding system in Estonia as specified by the Terms of Reference are as follows: 1) to conduct a review of the current R&D funding system in Estonia; 2) to review the objectives of the Estonian R&D Strategy 2002-2006; 3) to review best practice in R&D funding elsewhere; and 4) to propose an efficient, transparent and accountable R&D funding system.

Gender Advantages and Gender Normality in the Views of Estonian Secondary School Students

Science.gov (United States)

Kuurme, Tiiu; Kasemaa, Gertrud

2015-01-01

The aim of the study on Estonian secondary school students was to obtain an overview of the gender-related views and experiences of the everyday school life by students, and to analyse the school-related factors in the development of gender roles and gender-related expectations. We view gender equality as a central condition for social…

Re-conceptualizing mother tongue tuition of Estonian abroad as a transnational phenomenon

Directory of Open Access Journals (Sweden)

Maarja Siiner

2017-05-01

Full Text Available The governmental initiative called the Compatriots Programme, which supports language tuition in Estonian schools and societies abroad, reveals an increased interest in developing intergenerational language transmission in the growing Estonian diaspora. This transnational language political activity signals a new era in language policy, where nation states are increasingly decentralized by migration. The evaluation of the program furthermore reveals that organizing such schools requires a willingness to take language political agency, typically conducted by well-educated and well-integrated resourceful transnational multilingual parents. The present article outlines the results of an ethnographic study of the process of establishing the Estonian School in Copenhagen. This step has demanded a change in the mindset still prevailing in Estonia that language political activities, such as planning language acquisition, are solely the responsibility of the state. Since the prevailing language ideology in Denmark is not favorable towards multilingualism in migrant languages, intergenerational language transmission furthermore presupposes a feeling of ownership of the language and high language self-esteem. "Hargmaise keelepoliitika sünd. Eesti keeleõppe korraldamise võimalikkusest välismaal Taani näitel" Hargmaisus, kasvav väljarändajate arv ja sellega ka eesti keele rääkijate hulk välismaal on jätnud oma jälje eesti keelepoliitikale. Kui varem uuriti peamiselt seda, kuidas eesti keel muukeelses kontekstis muutub, siis viimasel kümnendil on riik asunud aktiivselt toetama eesti keele jätkuvat kasutamist välismaal, rahastades rahvuskaaslaste programmi abil haridusprogramme. Kuid millised faktorid määravad selle, kas uus eestlaste põlvkond oskab ja tahab eesti keelt rääkida? Artikkel hindab etnograafilises ja sotsiolingvistilises võtmes Kopenhaagenis kolm aastat tegutsenud Eesti Kooli ja Lasteklubi näitel, millised on keelekasutust

Seltsi muuseumist riigi keskmuuseumiks: ikka ajutiste lahendustega / Changes in the Estonian National Museum from 1909 to the present.

Directory of Open Access Journals (Sweden)

Krista Aru

2011-01-01

Full Text Available Changes in the Estonian National Museum from 1909 to the presentThe Estonian National Museum was founded in Tartu in 1909 as part of the national movement. With its activities and connections in society, the ENM helped create Estonian society, the nation’s collective memory and identity.The ENM has always been – despite the changing locations, names, and content – one of the symbols of national identity. But at the same time, ENM has never had its own building designed specially for the museum’s purposes.Since 1909 there have been several attempts to establish a home for the ENM. At first (1909–1923, Estonian society wanted to establish the museum in the center of Tartu. The museum was intended to become a key institution of the growing nation and establishing the nation’s identity.At last in 1923 the ENM secured the Raadi manor, outside the center of the city, in a beautiful park, near the lake with its boats and water attractions. In this manor the first permanent exhibition of mainly 19th century Estonian peasant life was compiled, and the ENM operated in the Raadi manor from 1923–1940 as the “Estonian’s own museum” The years of alternating occupations, World War II, and political terror damaged and destroyed the whole society. The Raadi manor was destroyed in the war too, and the ENM itself was divided into two parts – the State Ethnographic Museum and the State Literary Museum. The collections of the ENM were given to Tallinn and to many different places inside and outside Tartu. Then began “the period of temporary location” that continues today. The museum is located in several places in the city of Tartu.In 1988, the prior name of the State Ethnographic Museum – the Estonian National Museum – was reinstated. Since the 1990s there have been many attempts to secure a special building for the ENM. Now, at last, as a result of serious economic pressure, we are closer to this goal than ever. During the last five

Vene kirjandus venestusaja eesti koolides. Russian Literature in the Estonian Schools of the Russification Era

Directory of Open Access Journals (Sweden)

Ülle Pärli

2012-04-01

Full Text Available This article aims to give an overview of literary instruction in schools of the russification era at the beginning of the 20th century in Estonia; this was likewise the curriculum of literary study offered to the generation of educated youth which included the Young Estonians. Based on official documents, archival materials, and memoirs, and through analyses of anthologies, literary histories, and teaching methods in use at the time, we attempt to reconstruct the outlines of literary reading and requirements for students in various types of schools. When, as a result of school reform, Russian became the language of instruction; lessons in Russian became central in the curriculum, alongside the word of God; selections from Russian literature were read in the original language. In the lower grades, teaching was by the so-called ”natural method”, intended to guarantee swift achievement of fluency in ”living Russian language”; this was later replaced by systematic textual analysis, which distinguished between belles lettres and other types of texts. However, the study of literature was always subordinated to the goals of language instruction. In institutions of secondary education, study of Russian literature was separate from language instruction. Indeed, Russian literature was the only literature systematically studied in high schools (though one must keep in mind that not all schools completely followed the official program. Private schools were especially noticeable for their greater freedom, though all of them had to take general curriculum directives into account. Reading of literary texts connected with other languages thus had to remain almost purely illustrative. In view of the above, in the upper grades of elementary school and high school, students obtained a thorough introduction to the Russian classics. According to the official school curriculum, Russian literary history ended with Nikolai Gogol. Attempts were made to ignore

[Encapsulated voices : Estonian sound recordings from the German prisoner-of-war camps in 1916-1918] / Tõnu Tannberg

Index Scriptorium Estoniae

Tannberg, Tõnu, 1961-

2013-01-01

Arvustus: Encapsulated voices : Estonian sound recordings from the German prisoner-of-war camps in 1916-1918 (Das Baltikum in Geschichte und Gegenwart, 5). Hrsg. von Jaan Ross. Böhlau Verlag. Köln, Weimar und Wien 2012

Estonian Perceptions of Security: Not Only About Russia and the Refugees

OpenAIRE

Veebel Viljar; Ploom Illimar

2016-01-01

The current study focuses on the Estonian perceptions of security and on the defence situation both globally and locally. The dynamic results of the public opinion surveys on security risks conducted in Estonia over the last 10 years (2006-2016) will be presented. In addition, to understand whether some of the security risks could be over- or underestimated in Estonia, these results will be compared with the views expressed recently by the World Economic Forum, particularly the Global Risks R...

How to Improve the Supportive Role of Estonian Innovation System toward Launching New Products by High Technology Companies?

Directory of Open Access Journals (Sweden)

Liisi Sepp

2013-01-01

Full Text Available The purpose of the study is to evaluate how supportive is Estonian national innovation system toward the launching of new innovative products by high technology firms. The article intends to combine two broad areas of research – national innovation system approach and the different models of the new product launching. Based on the literature review and in-depth analysis of three case studies of Estonian high-tech company’s major barriers as well success factors of highly innovative product launches were identified. The barriers of the new product launching were linked with the systemic failures of the national innovation system. The most relevant failures of Estonian national innovation system inhibiting the new product development are capability and networking failures. The sources of innovation of high-technology firms are too narrow, linkages with domestic firms and higher education institutions as well with foreign firms are poorly developed. High-tech firms have also serious capacity problems due to the extremely weak support mechanism by national innovation system on the seed funding stage of product development and prototype building stage as well. Paper argues that resources needed for the innovation should not be looked too narrowly following linear innovation model approach. Instead interactive approach is needed, which combines capability building, network development, interactive learning with direct investments into fundamental research.

Tõlkepärl eesti ilukirjanduse algusaegadest – esimene eestikeelne robinsonaad / A Translation Gem from the Beginnings of Estonian Literature - the First Robinsonade

Directory of Open Access Journals (Sweden)

Ave Mattheus

2015-06-01

Full Text Available Teesid: Artiklis uuritakse Eesti Kirjandusmuuseumis asuvat mahukat, ligi 800 lk tõlkekäsikirja „Norem Robinson“, mida võib pidada esimeseks eesti kirjanduse täiemahuliseks robinsonaadiks. Selle valmistas Pärnu koolmeister Heinrich Gottlieb Lorenzsonn saksa pedagoogi ja koolikirjaniku Joachim Heinrich Campe menukast noorsooromaanist „Robinson der Jüngere“ (1779–1780. Tõlge valmis 1822.–1823. aastal, kuid jõudis trükki alles 1842. aastal tugevasti kärbitud ja mugandatud kujul. Toetudes deskriptiivse tõlkeuurimuse analüüsikategooriatele, vaadeldakse artiklis, millised tegurid tõlkeprotsessi suunasid ja milline oli kultuuriruum, kuhu tõlge omal ajal paigutus. SU M M A R Y This article discusses a voluminous manuscript translation of almost 800 pages entitled Norem Robinson (Engl. Robinson the Younger, from the collections of the Estonian Literary Museum. This manuscript can be considered as the first complete Robinsonade in Estonian literature. Its author is a schoolteacher from Pärnu, Heinrich Gottlieb Lorenzsonn (1803–1847, who translated it from the youth novel Robinson der Jüngere(1779–1780, Engl. Robinson the Younger, a bestseller by the educator, writer and a major representative of German Enlightenment, Heinrich Joachim Campe. Lorenzsonn’s translation was completed in 1822–1823, but not printed until 1842 in a strongly adapted version titled Norema Robinsoni ello ja juhtumised ühhe tühja sare peäl (Engl. The Life and Adventures of Robinson the Younger on a deserted island. The print version of the Robinsonade lacks a pedagogical frame story, where the father tells children about the adventures of Robinson and takes the opportunity to discuss and imitate with children all the actions taken by Robinson the Younger. Due to this and other extirpated parts, the possible target audience was enlarged – besides children and youth, the text was now addressed to adults as well. In accordance with the

Short outlines of books by Estonian authors : [annotations] / Rutt Hinrikus, Janika Kronberg

Index Scriptorium Estoniae

Hinrikus, Rutt, 1946-

1998-01-01

Laretei, Käbi. Eksiil; Toona, Elin. Lotukata; Park, Eeva. Naeru õpilane; Luik, Viivi. Inimese kapike; Laaman, Ilona. Vesi ahjus; Viiding, Juhan (Üdi, Jüri). Kogutud luuletused; Paju, Juhan. Katkenud romaan; Paju, Juhan. Hõõguv rist; Estonian short stories / toim. Kajar Pruul ja Darlene Reddaway; Traat, Mats. Kartaago kiirrong; Kauksi Ülle. Säng; Kross, Jaan. Paigallend; Puhvel, Madli. Symbol of dawn; Kaplinski, Jaan. Võimaluste võimalikkus; Kaplinski, Jaan. Usk on uskmatus

The dominance of indirect taxes in Estonian state budget. Summary:Kaudsete maksude dominant Eesti riigieelarve tuludes

Directory of Open Access Journals (Sweden)

Olev Raju

2013-09-01

Full Text Available Recession has sharply erected the question of tax burden and the optimal proportion of different kinds of taxes among the incomes of the budget. Indirect taxes and consumption taxes, which proportion is different according to different methodologies, dominate in Estonian state budget. The buoyancy of a tax system based on taxes of that kind is especially weak during the recession. The purpose of Estonian government’s economic policy during the highest peak of crisis was to keep the budget in balance. Instead of recovering economy the taxes were arisen and costs were reduced. The results of such a policy aren’t still clear. Difficulties concerning the incomes of budget have arisen the necessity for lifting taxes, which is possible as the tax burden is low now. But a sharp question of the optimal level of taxes is going to be raised. A formula for indirect tax optimum according to Ramsey taxes and Slutski decomposition has been proposed in the article

The Estonian diaspora in South-West Russia in the 1920—30s: migration results

Directory of Open Access Journals (Sweden)

Stupin Yuri

2010-11-01

Full Text Available This article analyses the spatial features of the settling of Russian Estonians in the Northwest region at the “zenith” of diaspora on the basis of 1920, 1926, and 1939 censuses. The author identifies the principal settling areas and points out the geographical preconditions for the rapid decline of the diaspora.

Exploring Constructivist Social Learning Practices in Aiding Russian-Speaking Teachers to Learn Estonian: An Action Research Approach

Science.gov (United States)

Kiilo, Tatjana; Kutsar, Dagmar

2012-01-01

Based on appreciative inquiry and threshold concepts from an intercultural learning perspective, the article makes insights into the constructivist social learning practice of Estonian language learning amongst Russian-speaking teachers in Estonia. The application of educational action research methodology, more specifically that of Bridget…

Non-market value of Estonian seminatural grasslands: a contingent valuation study. Eesti poolloodusliku rohumaa turuväline väärtus: tingliku hindamise uuring

Directory of Open Access Journals (Sweden)

Helli Lepasaar

2015-12-01

Full Text Available Seminatural grasslands i.e. the floodplain meadows, seashore meadows, wooded meadows, dry meadows, wooded pastures are the very traditional part of Estonian landscapes, which play an important role in the appearance of the landscape in general and also serve as an important habitat for many plant and animal species. In order to preserve the seminatural grasslands continuous annual mowing and/or pasturing is needed. This activity is not economically profitable and needs subsidizing. The authors of the work raise a hypothesis that the Estonian seminatural grasslands could be viewed as a valuable non-market environmental good for which a significant public demand exists. In order to find out the non-market value of the seminatural grasslands a contingent valuation study was carried out among the Estonian working-age population (size of the sample 1061 individuals. The average individual willingness to pay was 11.3 euros. During the study, the authors constructed the total demand function and discovered that the total annual demand for seminatural grasslands was 17.9 million euros.

The 2011 Estonian High School Language Reform in the Context of Critical Language Policy and Planning

Science.gov (United States)

Skerrett, Delaney Michael

2014-01-01

This paper seeks to situate Estonian language use and policy within the emerging field of critical language policy and planning (CLPP) by investigating the discourses that frame linguistic behaviour. This done by way of an analysis of a series of interviews carried out with key actors in language policy in Estonia. The discourses framing language…

The Challenges Organic Food Processors Meet at Small Emerging Market – Estonian Case

OpenAIRE

Sarapuu, Kerttu; Pehme, Sirli; Peetsmann, Elen; Matt, Darja

2014-01-01

Organic farming and demand for organic products is continually a growing trend all over the world (Willer et al., 2013). In Estonia the share of organic land is 15% of all agricultural land and the number of organic farmers is also growing (Vetemaa, Mikk 2013). Estonian organic food market is still in forming stage being affected by local organic farming development, marketing situation, economic situation and consumer attitudes. Organic processing has clearly not kept up with organic farming...

The Dominance of Indirect Taxes in Estonian State Budget

Directory of Open Access Journals (Sweden)

Olev Raju

2013-01-01

Full Text Available Recession has sharply erected the question of tax burden and the optimal proportion of different kinds of taxes among the incomes of the budget. Indirect taxes and consumption taxes, which proportion is different according to different methodologies, dominate in Estonian state budget. The buoyancy of a tax system based on taxes of that kind is especially weak during the recession. Difficulties concerning the incomes of budget have arisen the necessity for lifting taxes, which is possible as the tax burden is low now. But a sharp question of the optimal level of taxes is going to be raised. A formula for indirect tax optimum according to Ramsey taxes and Slutski decomposition has been proposed in the article.

Mental health and alcohol problems among Estonian cleanup workers 24 years after the Chernobyl accident.

Science.gov (United States)

Laidra, Kaia; Rahu, Kaja; Tekkel, Mare; Aluoja, Anu; Leinsalu, Mall

2015-11-01

To study the long-term mental health consequences of the 1986 Chernobyl nuclear accident among cleanup workers from Estonia. In 2010, 614 Estonian Chernobyl cleanup workers and 706 geographically and age-matched population-based controls completed a mail survey that included self-rated health, the Posttraumatic Stress Disorder Checklist (PCL), alcohol symptoms (AUDIT), and scales measuring depressive, anxiety, agoraphobia, fatigue, insomnia, and somatization symptoms. Respondents were dichotomized into high (top quartile) and low symptom groups on each measure. Logistic regression analysis detected significant differences between cleanup workers and controls on all measures even after adjustment for ethnicity, education, marital status, and employment status. The strongest difference was found for somatization, with cleanup workers being three times more likely than controls to score in the top quartile (OR = 3.28, 95% CI 2.39-4.52), whereas for alcohol problems the difference was half as large (OR = 1.52, 95% CI 1.16-1.99). Among cleanup workers, arrival at Chernobyl in 1986 (vs. later) was associated with sleep problems, somatization, and symptoms of agoraphobia. The toll of cleanup work was evident 24 years after the Chernobyl accident among Estonian cleanup workers indicating the need for focused mental health interventions.

Proficiency Assessment of Male Volleyball Teams of the 13-15-Year Age Group at Estonian Championships

Science.gov (United States)

Stamm, Meelis; Stamm, Raini; Koskel, Sade

2008-01-01

Study aim: Assessment of feasibility of using own computer software "Game" at competitions. Material and methods: The data were collected during Estonian championships in 2006 for male volleyball teams of the 13-15-years age group (n = 8). In all games, the performance of both teams was recorded in parallel with two computers. A total of…

Where Do Dead Books Go? The Problem of the Soviet Canon Today, on the Example of Johannes Becher's Work in Estonian

Directory of Open Access Journals (Sweden)

Katre Talviste

2013-06-01

Full Text Available The article describes the conception and editing process of an anthology of Johannes Becher’s poems (Unistades täiusest, 1962 in Estonian, and discusses its status in the Soviet and contemporary literary canon. The work on the Becher anthology was led by an already outstanding literary scholar Nigol Andresen and a young poet and translator Ain Kaalep, who later became one of the most prolific and wellknown poetry translators in Estonia. An important part was also played by another poet-translator, August Sang, who already had achieved such a standing in the Estonian literary field. Several other translators contributed to the anthology, making it a common project for intellectuals otherwise very differently positioned vis-à-vis the Soviet political authorities and cultural agendas. Becher’s work was strongly promoted by these instances, but his poetry was also read with genuine enthusiasm by the main contributors to the anthology (whose own poetry has certain parallels to some aspects of Becher’s, as well as the general public, at that time. After the fall of the Soviet regime it has been forgotten, mostly for the same contextual reasons that once granted its success. The case of his poetry in Estonian explores the question of this new invisibility of now politically irrelevant, but still voluminous and aesthetically intriguing literary works in the post-Soviet canon.

With or without articles? A comparison of article-like determiners in Estonian and Finnish

Directory of Open Access Journals (Sweden)

Helen Hint

2017-10-01

Full Text Available In this paper, we compare the use and functions of definite and indefinite article-like determiners in Estonian and Finnish. Our main aim is to explore whether the factors that explain the choice of particular determiner forms are similar in Estonian and Finnish. We use a picture-sequence based elicitation experiment to collect spoken narratives from adult native speakers of Estonian and Finnish, and apply non-parametric tree and forest models to analyze the data. Our findings indicate that number of mention and animacy are important predictor variables in both languages, but their exact effect is divergent. We also find that in Finnish, case of the determiner NP proves to be an important factor, while in Estonian, syntactic role of the NP explains some aspects of determiner form choice. Nevertheless, the overall usage frequency of determiners is modest in the Estonian and Finnish data, and the process of grammaticalizing articles is only in initial stages in both languages. *** Artikliga, artiklita? Eesti ja soome keele artiklilaadsete määratlejate võrdlus Siinses uurimuses analüüsime võrdlevalt artiklilaadseid definiitseid ja indefiniitseid määratlejaid eesti ja soome keeles. Eelkõige kõrvutame eesti keele definiitset määratlejat see ja soome keele definiitseid määratlejaid se ja tämä ning eesti ja soome indefiniitset määratlejat üks/yks(i. Samuti vaatleme eesti keele possessiivpronoomeni oma ning soome 3sg possessiivsufiksi (-nsa/-nsä, -Vn referentsiaalseid omadusi. Uurimuse põhieesmärgiks on selgitada, millised on peamised määratlejate kasutust mõjutavad keelelised faktorid eesti ja soome keeles ning kas need faktorid on keeliti sarnased või erinevad. Ühtlasi otsime vastust küsimusele, kas eesti ja soome keeles on põhjust rääkida määratlejate grammatisatsioonist artikliteks. Uuritav keelematerjal pärineb pildiseeria põhjal kogutud suulistest narratiividest. Uurimuses osales 20 eesti ja 20 soome keele

Noor-Eesti enesekoloniseerimisprojekt. Teine osa Olulised kirjandusmõtteviisid . The Self-Colonization Project of Young Estonia. Part II. Modes of Literary Thinking and Relations with Colonialism in Estonian Literature of the beginning of the 20th century

Directory of Open Access Journals (Sweden)

Tiit Hennoste

2012-04-01

Full Text Available The topic of this article is the literary discourse of Young Estonia; its relations with other important Estonian literary discourses from the beginning of the 20th century, and its relations with colonial cultural discourse. First, I give an overview of the basic positions of the Young Estonians’ literary discourse, the main shapers of which were Friedebert Tuglas, Gustav Suits, later on Johannes Semper as well. Next, I present the basic principles of three Estonian literary discourses from the beginning of the 20th century, which were also important to the Young Estonians: nationalist-naturalistic (close-to-life; socialist/ class-based, and 20th century modernist. The Young Estonians began as nationalists and/or socialists. During the formation of Young Estonia’s discourse at the end of the first and beginning of the second decade of the 20th century, 20th century modernism began, which the Young Estonians regarded first and foremost with irony. The Young Estonians’ literary discourse is a mixture of aestheticism, decadence, symbolism, romanticism, and classicism. The point of departure for the Young Estonian approach to literature was eurocentrism. They took a superior and negative view of existing Estonian literature, which they regarded as having fallen drastically behind Europe. Since it was unable to build on its own foundation, it had to borrow from Europe. The discourse’s understandings of cultural values – theory, reading, knowledge, ready-made culture, derive from the centrality of the dynamic of borrowing. New culture could be created freely, without the support of previous local tradition; it was to be an elite culture, while the writer remained an individualist. Literature was to follow the principle of art for art’s sake; aesthetics and the form of the work of art were basic criteria. The formal ideals of the work of art were classicist: unity, integrity (wholeness, harmony, order, logic, etc. Thirdly, I outline the

Radon in Estonian dwellings - Results from a National Radon Survey

Energy Technology Data Exchange (ETDEWEB)

Pahapill, Lia; Rulkov, Anne; Rajamaee, Raivo [Estonian Radiation Protection Centre (Kiirguskeskus), Tallinn (Spain); Aakerblom, Gustav [Swedish Radiation Protection Authority, Stockholm (Sweden)

2003-10-01

A countrywide survey of radon concentrations in Estonian dwellings was carried out during the period 1998-2001. The survey formed a part of the cooperation program on radiation protection between the Estonian Radiation Protection (Kiirguskeskus) Centre and the Swedish Radiation Protection Authority (SSI). The survey included measurements in a number of dwellings representative for Estonia in detached houses and multifamily buildings (only dwellings on the bottom floor were included in the survey). Altogether, radon concentrations were measured in 515 dwellings, a number large enough to be statistically significant. All measurements were made with alphatrack film detectors of the same type that SSI uses in Sweden. The measurements were made during a 2-3 month period during the winter half-year. Two detectors were used in each dwelling. In Estonia there are 0.17 million dwellings in detached houses and 0.45 million in multi apartment buildings. Of the 1.26 million inhabitants in Estonia. 0.36 million live in detached houses and 0.90 million in multi apartment buildings. Most of the latter were built during the Soviet occupation. Of the dwellings in multifamily buildings 30 % are assumed to be situated on the first floor. The mean radon concentration in dwellings in detached hoses, according to the survey results, is 103 Bq/m{sup 3}, in dwellings on the bottom floor in multi apartment buildings it is 78 Bq/m{sup 3}. In 1% of the dwellings the radon concentration exceeded 400 Bq/m{sup 3}. The highest radon concentration found in the study was 1040 Bq/m{sup 3}. Based on the assumption that the average radon concentration in the dwellings in multi-apartment buildings that are not situated on the bottom floor is 30 Bq/m{sup 3}, and that these dwellings constitute 70% of all dwellings in multi apartment buildings, the mean radon concentration in dwellings in multi apartment buildings is calculated to be 44 Bq/m{sup 3}. The mean value for all Estonia dwellings is calculated

Radon in Estonian dwellings - Results from a National Radon Survey

International Nuclear Information System (INIS)

Pahapill, Lia; Rulkov, Anne; Rajamaee, Raivo; Aakerblom, Gustav

2003-10-01

A countrywide survey of radon concentrations in Estonian dwellings was carried out during the period 1998-2001. The survey formed a part of the cooperation program on radiation protection between the Estonian Radiation Protection (Kiirguskeskus) Centre and the Swedish Radiation Protection Authority (SSI). The survey included measurements in a number of dwellings representative for Estonia in detached houses and multifamily buildings (only dwellings on the bottom floor were included in the survey). Altogether, radon concentrations were measured in 515 dwellings, a number large enough to be statistically significant. All measurements were made with alphatrack film detectors of the same type that SSI uses in Sweden. The measurements were made during a 2-3 month period during the winter half-year. Two detectors were used in each dwelling. In Estonia there are 0.17 million dwellings in detached houses and 0.45 million in multi apartment buildings. Of the 1.26 million inhabitants in Estonia. 0.36 million live in detached houses and 0.90 million in multi apartment buildings. Most of the latter were built during the Soviet occupation. Of the dwellings in multifamily buildings 30 % are assumed to be situated on the first floor. The mean radon concentration in dwellings in detached hoses, according to the survey results, is 103 Bq/m 3 , in dwellings on the bottom floor in multi apartment buildings it is 78 Bq/m 3 . In 1% of the dwellings the radon concentration exceeded 400 Bq/m 3 . The highest radon concentration found in the study was 1040 Bq/m 3 . Based on the assumption that the average radon concentration in the dwellings in multi-apartment buildings that are not situated on the bottom floor is 30 Bq/m 3 , and that these dwellings constitute 70% of all dwellings in multi apartment buildings, the mean radon concentration in dwellings in multi apartment buildings is calculated to be 44 Bq/m 3 . The mean value for all Estonia dwellings is calculated to be 60 Bq/m 3 . Using

Ärkamisaeg, Noor-Eesti ja miski nende vahel. Eesti kirjandusloo küsimusi Juhan Kunderi näitel / National Awakening , Young Estonia and Something In Between. Problems of Estonian Literary History in the Example of Juhan Kunder

Directory of Open Access Journals (Sweden)

Pille-Riin Larm

2013-12-01

Full Text Available According to the long-standing periodisation of Estonian literary history, the Estonian National Awakening that started in the mid-19th century was followed by a period of lesser creativity and originality, which ended only with the breakthrough of the modernist Young Estonia group in 1905. In the canon of Estonian literature, Juhan Kunder (1852–1888, today known primarily for his fairy tales, one play and lyrics of one song, is placed in this intermediate period. This article first introduces the significance of Kunder in his time. He was a popular writer and a wellknown pedagogue, and a younger contemporary of the great figures of the National Awakening. As a critic, magazine editor and literary historian, his most important contribution to literary history was in the development of literary thought. It seems that several precedents that have been attributed to the Young Estonia group, e.g., valuing originality, writing well-argued criticism, etc., actually originated from an earlier period. Based on these observations, the author of this article believes that the current structure of Estonian literary history is not adequately justified, and she points out a semantic shift in the terms in use. It is true that Kunder was largely an epigone of his predecessors, but in the positive sense of the term, meaning that he continued their mission. Similarly, Kunder’s predecessor, the ‘first Young Estonian’ Kreutzwald, and a representative of his 20th-century successors, Friedebert Tuglas, were also epigones. During the period of Russification that started during his era, Kunder’s attitudes could be considered progressive. Kunder was also a 19th-century contemporary of the Young Estonia group and a true Young Estonian in the original sense of the term which emerged in this period: a Young Estonian introduced new initiatives and was a leader of the national movement. Epigonism and membership in Young Estonia can be seen as the keys to cultural

Estonian experience in establishing the national radiation protection infrastructure in the newly independent State

International Nuclear Information System (INIS)

Kalam, J.

2001-01-01

The Estonian Radiation Protection Centre (ERPC) was established on 4 January 1996 as the regulatory authority for radiation protection and safety of radiation sources. The report explains the ERPC's structure and its main functions and activities, and provides information on the regulations that have been approved or are planned to be adopted. Reference is made to radiological emergency preparedness and, in particular, to the status of development of the system of regulatory control by authorization and inspection of radiation practices in the country. (author)

Riik võib lüüa SAS-i esmaspäevaks Estonian Airi omanikeringist välja / Erik Müürsepp, Mikk Salu

Index Scriptorium Estoniae

Müürsepp, Erik

2008-01-01

SAS osaleb Estonian Airþile lisakapitali eraldamises ainult juhul, kui Eesti riik müüb oma osaluses lennukompaniis SAS-ile. Peaminister Andrus Ansipi ning majandus- ja kommunikatsiooniminister Juhan Partsi seisukoht

Jüri Okas’ ‘specific objects’: diverging discourses in Estonian Art in the 1970s.

OpenAIRE

Kurg, Andres.

2003-01-01

Previously in the University eprints HAIRST pilot service at http://eprints.st-andrews.ac.uk/archive/00000367/ Article 3 of 6 in issue devoted to the visual culture of the Scandinavian and Baltic region. This article will look at the early works of Estonian architect and artist Jüri Okas and will try to work between diverging languages and interpretations, reading works by Okas against the background of Anglo-american conceptualism and minimalism of the same period. The first part of th...

Bernhard Linde. Noor-Eesti vooriülem. Bernhard Linde. Leader of the Young Estonian Pack

OpenAIRE

Jaanus Kulli

2012-01-01

Bernhard Linde (1886–1954) was a recognized and prolific Estonian theatre critic of the first quarter of the 20th century, who mediated and propagated western as well as eastern European theatrical innovations. In addition, he was active as a literary and art critic, publisher, and proponent of libraries, to a modest extent he was a prose writer and poet. Unquestionably, however, Bernhard Linde’s most prominent role was as one of the founding members of the literary movement Young Estonia. He...

Economic modelling of the capture-transport-sink scenario of industrial CO2 emissions: The Estonian-Latvian cross-border case study

NARCIS (Netherlands)

Shogenova, A.; Shogenov, K.; Pomeranceva, R.; Nulle, I.; Neele, F.; Hendriks, C.

2011-01-01

Industrial CO2 emissions and opportunities for CO2 geological storage in the Baltic Region were studied within the EU GeoCapacity project supported by the European Union Framework Programme 6. Estonia produces the largest amounts of CO2 emissions in the region, due to the combustion of Estonian oil

Rahvusliku ajaloo tõlgendusi eesti draamas ja teatris 1970.–1980. aastatel. Interpretations of National History in Estonian Drama and Theatre in the 1970s–1980s

Directory of Open Access Journals (Sweden)

Piret Kruuspere

2012-04-01

Full Text Available According to theatre scholar Freddie Rokem, theatre portraying or performing historical events is seeking to overcome both the separation and the exclusion from the past, as well as ’striving to create a community where the events from this past will matter again’. This article covers the topic of interpretations of national history in Estonian theatre and in original dramaturgy during the Soviet era, with the focus on aspects like national self-reflection and the relationship to the common past. The main focus is on the 1970s, with examples from Rein Saluri’s, Mati Unt’s and Jaan Kaplinski’s drama productions. During the period in question, re-tellings of national history on Estonian theatre stages were clothed in metaphors, allusions and secret codes – Aesopian language. Within the Soviet cultural context, I analyse if and to what extent theatre of the time displayed resistance, political theatre or social allegory. Theatre was also connected with the principle of playing or playfulness, which on one hand indicates national resistance, national endurance, and a certain survival strategy, but on the other hand indicates the Estonian as being an involuntary homo ludens – the Playing Man, who through various enforced roles is trying to adjust to the whirlwinds of history. Saluri’s first play, the intellectual drama Külalised (The Guests, opens with an allusion to a drama classic the world over, William Shakespeare’s Hamlet, adding a powerful national-symbolic background to the play. The role-play which permeates and structures the play (The Host–The Guest however, displays allegorical references to changes in the status and self-image of Estonians. In Unt’s play Peaproov (Dress Rehearsal, the principle of playing/acting sheds ironic light on the makers of an historical film and their readiness to create superficially flashy interpretations at any cost: this take acts as an estranging and generalising reflection in a context

The Dialogue with Hamlet: Paul-Eerik Rummo’s “Hamlet’s Songs” as an Example of the Existential Paradigm in Estonian Culture

Directory of Open Access Journals (Sweden)

Anneli Mihkelev

2013-06-01

Full Text Available The article demonstrates different meanings of the motif of Hamlet in the Estonian culture. Hamlet as a literary figure has been very important and influential, a symbol of will and a fighter in a hopeless situation. Paul-Eerik Rummo’s poem “Hamlet’s Songs” (1964 forms the centre around which revolve not only written texts but also many such cultural texts as theatre performances and music, all connected by allusions to Hamlet. Rummo’s poem is one of the most innovative poems from the 1960s in Estonian literature. The generation of the 1960s was influenced by several important contemporary theories, including existentialism. Many young writers systematically undermined the Soviet regime in their works. The use of the motif of Hamlet reveals a similarity between the existential and romantic rebellions. Rummo’s dialogue with Hamlet in his poem expresses optimism in a hopeless situation in a way different from Shakespeare’s.

“... if there’s a party, then there’s definitely alcohol”. Construction of partying practices and abstinence in Estonian youth forums

Directory of Open Access Journals (Sweden)

Parder Mari-Liisa

2015-12-01

Full Text Available AIMS – Adolescents’ abstinence from alcohol has not been much researched in terms of providing suggestions for prevention strategies. This study aims to fill that gap by offering a practice theory-inspired analysis of how the unwritten rules of partying practices are communicated between posters of Estonian youth forums.

Taxes, Estonian state budget and economic crises. Maksud, riigi eelarve ja majanduskriis

Directory of Open Access Journals (Sweden)

Olev Raju

2013-01-01

Full Text Available Recession has sharply erected the question of tax burden and the optimal proportion of different kinds of taxes among the incomes of the budget. Indirect taxes and consumption taxes, which proportion is different according to different methodologies, dominate in Estonian state budget. The buoyancy of a tax system based on taxes of that kind is especially weak during the recession. Difficulties concerning the incomes of budget have arisen the necessity for lifting taxes, which is possible as the tax burden is low now. But a sharp question of the optimal level of taxes is going to be raised. A formula for indirect tax optimum according to Ramsey taxes and Slutski decomposition has been proposed in the article.

Ionization chamber

International Nuclear Information System (INIS)

Jilbert, P.H.

1975-01-01

The invention concerns ionization chambers with particular reference to air-equivalent ionization chambers. In order to ensure that similar chambers have similar sensitivities and responses the surface of the chamber bounding the active volume carries a conducting material, which may be a colloidal graphite, arranged in the form of lines so that the area of the conducting material occupies only a small proportion of the area of said surface. (U.S.)

Attitudes of Academic Staff towards Their Own Work and towards External Evaluation, from the Perspective of Self-Determination Theory: Estonian Case

Science.gov (United States)

Seema, Riin; Udam, Maiki; Mattisen, Heli

2016-01-01

The purpose of this study was to ascertain the attitudes of academic staff towards their own work as well as towards external evaluations. The study was based on (1) an analysis of assessment reports of institutional accreditations conducted by the Estonian Quality Agency for Higher and Vocational Education and (2) self-determination theory on…

Glove box chamber

International Nuclear Information System (INIS)

Cox, M.E.; Cox, M.E.

1975-01-01

An environmental chamber is described which enables an operator's hands to have direct access within the chamber without compromising a special atmosphere within such chamber. A pair of sleeves of a flexible material are sealed to the chamber around associated access apertures and project outwardly from such chamber. Each aperture is closed by a door which is openable from within the sleeve associated therewith so that upon an operator inserting his hand and arm through the sleeve, the operator can open the door to have access to the interior of the chamber. A container which is selectively separable from the remainder of the chamber is also provided to allow objects to be transferred from the chamber without such objects having to pass through the ambient atmosphere. An antechamber permitting objects to be passed directly into the chamber from the ambient atmosphere is included. (auth)

wire chamber

CERN Multimedia

Proportional multi-wire chamber. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle. Proportional wire chambers allow a much quicker reading than the optical or magnetoscriptive readout wire chambers.

The figure of the teacher in Estonian school discourse

Directory of Open Access Journals (Sweden)

Ott Puumeister

2014-10-01

Full Text Available The article concerns itself with the figure of the teacher in Estonian society. We do not concentrate on the educational system as a whole, but on one specific and crucial element in this apparatus - the teacher. We begin by offering a brief historical overview of the conditions of pedagogues in the 20th century before moving on to describe the adoption of neo-liberal free market policies since the 1990s and the effects these policies had and still have on education. Our main concern is to understand the teacher as an actor in power relations; to achieve this understanding we have selected as our examples 1 surveillance techniques in school environment that have direct relations to the state and the market; and 2 the 2012 educational workers' strike that made it quite clear that the teachers have been fixed to a position of wage workers. The overall and more abstract aim of the paper is to think about the social role of the teacher in Estonia.

Test chamber

NARCIS (Netherlands)

Leferink, Frank Bernardus Johannes

2009-01-01

A test chamber for measuring electromagnetic radiation emitted by an apparatus to be tested or for exposing an apparatus to be tested to an electromagnetic radiation field. The test chamber includes a reverberation chamber made of a conductive tent fabric. To create a statistically uniform field in

Smoking prevalence and attitudes towards smoking among Estonian physicians: results from cross-sectional studies in 2002 and 2014

OpenAIRE

Põld, Mariliis; Pärna, Kersti

2017-01-01

Objectives To explore smoking prevalence and attitudes towards smoking among Estonian physicians in 2002 and 2014. Design Two self-administered cross-sectional postal surveys were conducted among practising physicians in Estonia. Participants Initial sample consisted of all practising physicians in Estonia. The corrected response rate was 67.8% in 2002 and 53.1% in 2014. Present study sample was restricted to physicians younger than 65 years (n=2549 in 2002, n=2339 in 2014). Methods Age-stand...

The Role of Parents and Parental Mediation on 0-3-Year Olds' Digital Play with Smart Devices: Estonian Parents' Attitudes and Practices

Science.gov (United States)

Nevski, Elyna; Siibak, Andra

2016-01-01

In this manuscript, we analyse the attitudes and practices of Estonian parents (N = 198) who allowed their 0-3-year olds to use smart devices. We aimed to discover if there was an interaction between parental use of smart technologies, parents' attitudes and the child's age that would predict young children's usage of smart devices. We also wanted…

The Mobile Chamber

Science.gov (United States)

Scharfstein, Gregory; Cox, Russell

2012-01-01

A document discusses a simulation chamber that represents a shift from the thermal-vacuum chamber stereotype. This innovation, currently in development, combines the capabilities of space simulation chambers, the user-friendliness of modern-day electronics, and the modularity of plug-and-play computing. The Mobile Chamber is a customized test chamber that can be deployed with great ease, and is capable of bringing payloads at temperatures down to 20 K, in high vacuum, and with the desired metrology instruments integrated to the systems control. Flexure plans to lease Mobile Chambers, making them affordable for smaller budgets and available to a larger customer base. A key feature of this design will be an Apple iPad-like user interface that allows someone with minimal training to control the environment inside the chamber, and to simulate the required extreme environments. The feedback of thermal, pressure, and other measurements is delivered in a 3D CAD model of the chamber's payload and support hardware. This GUI will provide the user with a better understanding of the payload than any existing thermal-vacuum system.

The treatment of lexical collocations in EFL coursebooks in the Estonian secondary school context

Directory of Open Access Journals (Sweden)

Liina Vassiljev

2015-04-01

Full Text Available The article investigates lexical collocations encountered in English as a Foreign Language (EFL instruction in Estonian upper secondary schools. This is achieved through a statistical analysis of collocations featuring in three coursebooks where the collocations found are analysed in terms of their type, frequency and usefulness index by studying them through an online language corpus (Collins Wordbanks Online. The coursebooks are systematically compared and contrasted relying upon the data gathered. The results of the study reveal that the frequency and range of lexical collocations in a language corpus have not been regarded as an essential criterion for their selection and practice by any of the coursebook authors under discussion.

Drift chamber

International Nuclear Information System (INIS)

Inagaki, Yosuke

1977-01-01

Drift chamber is becoming an important detector in high energy physics as a precision and fast position detector because of its high spatial resolution and count-rate. The basic principle is that it utilizes the drift at constant speed of electrons ionized along the tracks of charged particles towards the anode wire in the nearly uniform electric field. The method of measuring drift time includes the analog and digital ones. This report describes about the construction of and the application of electric field to the drift chamber, mathematical analysis on the electric field and equipotential curve, derivation of spatial resolution and the factor for its determination, and selection of gas to be used. The performance test of the chamber was carried out using a small test chamber, the collimated β source of Sr-90, and 500 MeV/C electron beam from the 1.3 GeV electron synchrotron in the Institute of Nuclear Study, University of Tokyo. Most chambers to date adopted one dimensional read-out, but it is very advantageous if the two dimensional read-out is feasible with one chamber when the resolution in that direction is low. The typical methods of delay line and charge division for two dimensional read-out are described. The development of digital read-out system is underway, which can process the signal of a large scale drift chamber at high speed. (Wakatsuki, Y.)

Multiple chamber ionization detector

International Nuclear Information System (INIS)

Solomon, E.E.

1980-01-01

A multi-chambered ionisation detector enables the amount of radiation entering each chamber from a single radioactive, eg β, source to be varied by altering the proportion of the source protruding into each chamber. Electrodes define chambers and an extended radioactive source is movable to alter the source length in each chamber. Alternatively, the source is fixed relative to outer electrodes but the central electrode may be adjusted by an attached support altering the chamber dimensions and hence the length of source in each. Also disclosed are a centrally mounted source tiltable towards one or other chamber and a central electrode tiltable to alter chamber dimensions. (U.K.)

Doriot Climatic Chambers

Data.gov (United States)

Federal Laboratory Consortium — The Doriot Climatic Chambers are two, 60-feet long, 11-feet high, 15-feet wide chambers that are owned and operated by NSRDEC. The Doriot Climatic Chambers are among...

Ionization chamber

International Nuclear Information System (INIS)

1977-01-01

An improved ionization chamber type X-ray detector comprises a heavy gas at high pressure disposed between an anode and a cathode. An open grid structure is placed next to the anode and is maintained at a voltage intermediate between the cathode and anode potentials. The electric field which is produced by positive ions drifting towards the cathode is thus shielded from the anode. Current measuring circuits connected to the anode are, therefore, responsive only to electron current flow within the chamber and the recovery time of the chamber is shortened. The grid structure also serves to shield the anode from electrical currents which might otherwise be induced by mechanical vibrations in the ionization chamber structure

Vitality of the Estonian forests (results of the inventory and research)

International Nuclear Information System (INIS)

Karoles, K.

1991-01-01

Factors affecting Estonian forests are: The environmental, specially atmospheric pollution, - the foundation of new forests as monoculture on unsuitable locations, - mechanical damages by unsuitable forest machinery, - unfavourable water conditions, - Heterobasidion or Armillaria rot roots. Local damages in consequence of air pollutants are distributed in environments of Tallinn, Kivioli, Kohtla-Jaerve and the thermal power stations (Narva), where the SO 2 -content in the air is on the average higher than 50 (80) μg/m 3 . Pine forests on dry sand soils (600 ha damaged in 1989) and the older spruce forests show the new type of forest decline. High Al-ion concentration, disturbances of the Ca-Mg-metabolism, an extreme nutrient deficit, (specially N-deficit) and periodical water deficit as well as pathogenic fungi are damaging the trees. Spruces show nonspecific defoliation, needle necrosis, needlefall, occurence of fungal diseases. More damaged are the spruce forests in regions with basic precipitations and high sulphur-deposition. (orig./UWA) [de

Gender differences in factors associated with sexual intercourse among Estonian adolescents.

Science.gov (United States)

Part, Kai; Rahu, Kaja; Rahu, Mati; Karro, Helle

2011-06-01

To examine factors associated with early sexual intercourse among 15 to 16-year-old adolescents by gender. The data were collected from a random sample of Estonian basic schools' ninth grade pupils in 1999 using self-completed questionnaires. A multivariate logistic regression analysis for boys and girls was used to test for associations between sexual intercourse, and personal gender role-related attitudes, attitudes towards sexual intercourse, pubertal timing, smoking status and experience of drunkenness. Of the respondents, 14.6% of boys and 13.1% of girls had experienced sexual intercourse. Traditional gender role-related attitudes were associated with sexual intercourse among girls, but not among boys. Smoking and experience of drunkenness was strongly associated with sexual intercourse for both genders. Gender differences in the association between gender role-related attitudes and early sexual intercourse were observed among 15 to 16-year-olds in Estonia. Smoking and experience of drunkenness were strongly related to sexual intercourse for both genders.

MODELLING DICLOFENAC AND IBUPROFEN RESIDUES IN MAJOR ESTONIAN SEASIDE CITIES

Directory of Open Access Journals (Sweden)

Erki Lember

2016-06-01

Full Text Available A theoretical model was developed to model the fate of two common pharmaceutical residues: diclofenac and ibuprofen in eight Estonian seaside cities that discharge their wastewaters directly into the Baltic Sea. The consumption rates of the active ingredients of diclofenac and ibuprofen from 2006-2014 were analysed. A decrease of 19.9% for diclofenac consumption and an increase of 14.1% for ibuprofen were found. The fate of diclofenac and ibuprofen were modelled by considering the human metabolism removal rate for pharmaceuticals, the removal rate of diclofenac and ibuprofen in activated sludge wastewater treatment plants (WWTP and annual flow rates. An average decrease from 1 to 0.8 µg/l (decrease of 20% for diclofenac and an increase from 11.4 to 13.4 µg/l (increase of 14.9% for ibuprofen for the concentration in the effluents of the WWTP were modelled. The model gives us a good overview about the theoretical concentrations of pharmaceutical residues in the environment and is helpful for evaluating environmental impacts.

Determination of Heating Value of Estonian Oil Shale by Laser-Induced Breakdown Spectroscopy

Directory of Open Access Journals (Sweden)

M. Aints

2018-01-01

Full Text Available The laser-induced breakdown spectroscopy (LIBS combined with multivariate regression analysis of measured data were utilised for determination of the heating value and the chemical composition of pellets made from Estonian oil shale samples with different heating values. The study is the first where the oil shale heating value is determined on the basis of LIBS spectra. The method for selecting the optimal number of spectral lines for ordinary multivariate least squares regression model is presented. The correlation coefficient between the heating value predicted by the regression model, and that measured by calorimetric bomb, was R2=0.98. The standard deviation of prediction was 0.24 MJ/kg. Concentrations of oil shale components predicted by the regression model were compared with those measured by ordinary methods.

Corporate Governance from the Perspective of Stakeholder Theory and in Light of Perceptions among Estonian Owners and Managers of Relations with Stakeholders / Mari Kooskora

Index Scriptorium Estoniae

Kooskora, Mari, 1969-

2006-01-01

Äriühingute valitsemise kontseptsioon ja teoreetiline taust; Eesti omanike ja tippjuhtide ootused suhetes erinevate huvigruppidega ning äriühingute valitsemine huvigruppide teooriast lähtudes. Skeem: The stakeholder model. Tabelid: Contractual and community stakeholders; Overview of how perceptions of the main stakeholder groups among Estonian business leaders between 1995-2004 have changed

Change in medical plant use in Estonian ethnomedicine: a historical comparison between 1888 and 1994.

Science.gov (United States)

Sõukand, Renata; Kalle, Raivo

2011-05-17

The aim of this paper is to compare the changes in the utilization of species from various hemeroby categories (indicating the degree of sensitivity of the plant to human impact) using historical data concerning the years 1888-1994. The authors digitised 8808 handwritten reports, reflecting local ethnopharmacological knowledge from 8 selected collections from the Estonian Folklore Archives of the Estonian Literary Museum. They were semi-quantitatively analyzed according to the sensitivity to human impact of 540 taxa that could possibly be related to the plant vernacular names given in the reports. Although in different periods of time the number of ethnopharmacologically used plants has changed, the proportion of plants utilized from each group has remained relatively same, consisting on average of: 23% anthropophytes, 42% apophytes, 32% hemeradiaphores and 3% hemerophobes. Comparison of the application of the most used plants revealed considerable changes of plant utilization, in which the varied use of the most popular anthropophytes increased and the applied scope of the most popular hemeradiaphores and hemerophobes decreased almost by twofold in one century. Case studies on seven taxa are presented, of them, use of Allium sativum L., Aesculus hippocastanum L. and Mentha xpiperita L. increased, whereas the use of Hordeum L., Orchidaceae, Paris quadrifolia L. and Briza media L. decreased greatly. This research contributes to the better understanding of the cognitive and human ecological concepts underlying the use of medicinal plants in Estonia. Strong increase in the ethnomedical utilization of plants depending on human influence, and a decrease in the use of taxa that do not prefer human activities indicates that, despite some of the population still have access to natural resources and diverse knowledge of the medical use of plants, the majority relies on a very narrow selection and a rather restricted herbal landscape. Copyright © 2011 Elsevier Ireland Ltd

Peltier-based cloud chamber

Science.gov (United States)

Nar, Sevda Yeliz; Cakir, Altan

2018-02-01

Particles produced by nuclear decay, cosmic radiation and reactions can be identified through various methods. One of these methods that has been effective in the last century is the cloud chamber. The chamber makes visible cosmic particles that we are exposed to radiation per second. Diffusion cloud chamber is a kind of cloud chamber that is cooled by dry ice. This traditional model has some application difficulties. In this work, Peltier-based cloud chamber cooled by thermoelectric modules is studied. The new model provided uniformly cooled base of the chamber, moreover, it has longer lifetime than the traditional chamber in terms of observation time. This gain has reduced the costs which spent each time for cosmic particle observation. The chamber is an easy-to-use system according to traditional diffusion cloud chamber. The new model is portable, easier to make, and can be used in the nuclear physics experiments. In addition, it would be very useful to observe Muons which are the direct evidence for Lorentz contraction and time expansion predicted by Einsteins special relativity principle.

Implementation of quality assurance and quality control in the Nuclear Analytical Laboratory of the Estonian Radiation Protection Centre

International Nuclear Information System (INIS)

Koeoep, T.; Jakobson, E.

2002-01-01

The Analytical Laboratory of the Estonian Radiation Protection Centre is in the process of implementing the system of Quality Assurance (QA) and Quality Control (QC) in the framework of the IAEA TC Project RER/2/004/ 'QA/QC of Nuclear Analytical Techniques'. The draft Quality Manual with annexes has been prepared accordingly to the ISO 17025 Guide, documents and other printed material delivered on the seminars of the project. The laboratory supply has been supplemented with necessary equipment for guaranteeing of quality. Proficiency testing included in the project has been performed successfully. (author)

Dual ionization chamber

International Nuclear Information System (INIS)

Mallory, J.; Turlej, Z.

1981-01-01

Dual ionization chambers are provided for use with an electronic smoke detector. The chambers are separated by electrically-conductive partition. A single radiation source extends through the partition into both chambers, ionizing the air in each. The mid-point current of the device may be balanced by adjusting the position of the source

Marketingová komunikace České filharmonie

OpenAIRE

Zelený, Martin

2013-01-01

The thesis is by full extension aimed at the marketing communication of the Czech Phil-harmonic, the leading Czech orchestra. The goal is to analyse and to evaluate the marketing communication development in the orchestra, especially from the beginning of the 21st century to nowadays. The first part of the thesis introduces the marketing communication as a component of the marketing mix. Following, there is a depiction of the Czech phil-harmonic from the historic point of view and the orchest...

Chernobyl is still haunting us. Radionuclides in Estonian mushrooms

International Nuclear Information System (INIS)

Martin, J.; Vilde, R.; Martin, L.; Aaspollu, J.; Tekko, S.

1993-01-01

The disaster that happened at the Chernobyl nuclear power station in 1986 caused a sharp rise in radioactive pollution over an extensive area in the region of the Baltic Sea. To estimate the distribution and the concentration of Cs-137 and Sr-90 in Estonian ecosystems, samples of mushrooms, mosses, lichens and the upper horizons of soil were gathered from 63 test sites during 1991. We were particularly interested in the amounts of radionuclides in mushrooms because these are used as food by people. Dangerously high radionuclide concentrations were found in mushrooms gathered in North-East Estonia. Heightened concentrations were registered here and there all over the territory of Estonia, especially in mushrooms gathered in Central and South-Western Estonia. The Cs-137 content in mushrooms depends on its content in other components of the ecosystems, first and foremost on the concentrations of radiocaesium in mosses and litter, which, therefore, can be used as indicators in prognostication the radioactive pollution of mushrooms in a certain region. As Cs-137 migrates between various ecosystem components, it is necessary to check the radioactivity of the forest products used for food for still a number of years to come. The Sr-90 level was low in all the ecosystem components examined. (author). 3 figs., 10 refs

Wire Chamber

CERN Multimedia

Magnetoscriptive readout wire chamber. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

Wire chamber

CERN Multimedia

1967-01-01

Magnetoscriptive readout wire chamber.Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

Kolm Eesti Robinsoni: Daniel Defoe romaan eesti tõlkes / Three Estonian Robinsons: Daniel Defoe’s Novel in Estonian Translation

Directory of Open Access Journals (Sweden)

Ene-Reet Soovik

2012-06-01

Full Text Available The article discusses three Estonian translations of Daniel Defoe’s Robinson Crusoe into Estonian with the focus on the completeness of the translated texts and the characterisation given to these in paratextual information. While there are several translations and versions of the tex t available in E stonian that have either used a mediating language or do not proceed directly from Defoe’s novel, three editions explicitly list Defoe’s English-language Robinson Crusoe as their source text. These are Rudolf Sirge’s translation from 1950 and two editions translated by Valter Rummel that appeared in 1984 (reprinted in 2001 and 2007, respectively. The article sets out to discover the main differences between the three editions and the possible reasons that may have triggered their publication in Estonia at those particular times. In order to approach the issues, a general framework derived from descriptive translation studies is employed with an emphasis on Gideon Toury’s chrestomatic treatment of translation norms. Thus an attempt is made to detect the preliminary translational norms regarding translation policy, particularly the choice of texts to be translated, as well as the matricial norms that concern the fullness of the translated text and are part of operational norms manifested in the translator’s decisions which, in two of the cases at hand, may also have been decisions made by the editor or the censor. Rudolf Sirge’s translation appeared at a time when Estonia had fairly recently been incorporated into the Soviet Union and there was a lack of children’s literature ideologically appreciated by the regime. This may account for the packaging of the book as a work with a strong didactic bent, while its primary audience was taken to be children and young adults for whom the protagonist served as an example of a hard-working and tenacious hero to be emulated by young Soviets. The target text has been considerably shortened as

Ionization chambers

International Nuclear Information System (INIS)

Boag, J.W.

1987-01-01

Although a variety of solid-state and chemical methods for measuring radiation dose have been developed in recent decades and calorimetry can now provide an absolute standard of reference, ionization dosimetry retains its position as the most widely used, most convenient, and, in most situations, most accurate method of measuring either exposure or absorbed dose. The ionization chamber itself is the central element in this system of dosimetry. In this chapter the principles governing the construction and operation of ionization chambers of various types are examined. Since the ionization chambers now in general use are nearly all of commercial manufacture, the emphasis is on operating characteristics and interpretation of measurements rather than on details of construction, although some knowledge of the latter is often required when applying necessary corrections to the measured quantities. Examples are given of the construction of typical chambers designed for particular purposes, and the methods of calibrating them are discussed

Gas microstrip chambers

International Nuclear Information System (INIS)

McIntyre, P.M.; Barasch, E.F.; Bowcock, T.J.V.; Demroff, H.P.; Elliott, S.M.; Howe, M.R.; Lee, B.; Mazumdar, T.K.; Pang, Y.; Smith, D.D.; Wahl, J.; Wu, Y.; Yue, W.K.; Gaedke, R.M.; Vanstraelen, G.

1992-01-01

The gas microstrip chamber has been developed from concept to experimental system during the past three years. A pattern of anode and grid lines are microfabricated onto a dielectric substrate and configured as a high-resolution MWPC. Four recent developments are described: Suitable plastic substrates and lithography techniques for large-area chambers; non-planar silicon-based chambers for 20 μm resolution; integrated on-board synchronous front-end electronics and data buffering; and a porous silicon active cathode for enhanced efficiency and time response. The microstrip chamber appears to be a promising technology for applications in microvertex, tracking spectrometer, muon spectrometer, and transition radiation detection. (orig.)

Individual and work-related risk factors for musculoskeletal pain: a cross-sectional study among Estonian computer users.

Science.gov (United States)

Oha, Kristel; Animägi, Liina; Pääsuke, Mati; Coggon, David; Merisalu, Eda

2014-05-28

Occupational use of computers has increased rapidly over recent decades, and has been linked with various musculoskeletal disorders, which are now the most commonly diagnosed occupational diseases in Estonia. The aim of this study was to assess the prevalence of musculoskeletal pain (MSP) by anatomical region during the past 12 months and to investigate its association with personal characteristics and work-related risk factors among Estonian office workers using computers. In a cross-sectional survey, the questionnaires were sent to the 415 computer users. Data were collected by self-administered questionnaire from 202 computer users at two universities in Estonia. The questionnaire asked about MSP at different anatomical sites, and potential individual and work related risk factors. Associations with risk factors were assessed by logistic regression. Most respondents (77%) reported MSP in at least one anatomical region during the past 12 months. Most prevalent was pain in the neck (51%), followed by low back pain (42%), wrist/hand pain (35%) and shoulder pain (30%). Older age, right-handedness, not currently smoking, emotional exhaustion, belief that musculoskeletal problems are commonly caused by work, and low job security were the statistically significant risk factors for MSP in different anatomical sites. A high prevalence of MSP in the neck, low back, wrist/arm and shoulder was observed among Estonian computer users. Psychosocial risk factors were broadly consistent with those reported from elsewhere. While computer users should be aware of ergonomic techniques that can make their work easier and more comfortable, presenting computer use as a serious health hazard may modify health beliefs in a way that is unhelpful.

Double chamber ion source

International Nuclear Information System (INIS)

Uman, M.F.; Winnard, J.R.; Winters, H.F.

1978-01-01

The ion source is comprised of two discharge chambers one of which is provided with a filament and an aperture leading into the other chamber which in turn has an extraction orifice. A low voltage arc discharge is operated in an inert gas atmosphere in the filament chamber while an arc of higher voltage is operated in the second ionization chamber which contains a vapor which will give the desired dopant ion species. The entire source is immersed in an axial magnetic field parallel to a line connecting the filament, the aperture between the two chambers and the extraction orifice. (author)

Ussing Chamber

NARCIS (Netherlands)

Westerhout, J.; Wortelboer, H.; Verhoeckx, K.

2015-01-01

The Ussing chamber system is named after the Danish zoologist Hans Ussing, who invented the device in the 1950s to measure the short-circuit current as an indicator of net ion transport taking place across frog skin (Ussing and Zerahn, Acta Physiol Scand 23:110-127, 1951). Ussing chambers are

DELPHI Barrel Muon Chamber Module

CERN Multimedia

1989-01-01

The module was used as part of the muon identification system on the barrel of the DELPHI detector at LEP, and was in active use from 1989 to 2000. The module consists of 7 individual muons chambers arranged in 2 layers. Chambers in the upper layer are staggered by half a chamber width with respect to the lower layer. Each individual chamber is a drift chamber consisting of an anode wire, 47 microns in diameter, and a wrapped copper delay line. Each chamber provided 3 signal for each muon passing through the chamber, from which a 3D space-point could be reconstructed.

Gridded ionization chamber

International Nuclear Information System (INIS)

Houston, J.M.

1977-01-01

An improved ionization chamber type x-ray detector comprises a heavy gas at high pressure disposed between an anode and a cathode. An open grid structure is disposed adjacent the anode and is maintained at a voltsge intermediate between the cathode and anode potentials. The electric field which is produced by positive ions drifting toward the cathode is thus shielded from the anode. Current measuring circuits connected to the anode are, therefore, responsive only to electron current flow within the chamber and the recovery time of the chamber is shortened. The grid structure also serves to shield the anode from electrical currents which might otherwise be induced by mechanical vibrations in the ionization chamber structure

Whole-word frequency and inflectional paradigm size facilitate Estonian case-inflected noun processing.

Science.gov (United States)

Lõo, Kaidi; Järvikivi, Juhani; Baayen, R Harald

2018-06-01

Estonian is a morphologically rich Finno-Ugric language with nominal paradigms that have at least 28 different inflected forms but sometimes more than 40. For languages with rich inflection, it has been argued that whole-word frequency, as a diagnostic of whole-word representations, should not be predictive for lexical processing. We report a lexical decision experiment, showing that response latencies decrease both with frequency of the inflected form and its inflectional paradigm size. Inflectional paradigm size was also predictive of semantic categorization, indicating it is a semantic effect, similar to the morphological family size effect. These findings fit well with the evidence for frequency effects of word n-grams in languages with little inflectional morphology, such as English. Apparently, the amount of information on word use in the mental lexicon is substantially larger than was previously thought. Copyright © 2018 Elsevier B.V. All rights reserved.

Conceptual co-presence of motion and emotion in the Estonian terms of personality

Directory of Open Access Journals (Sweden)

Heili Orav

2010-05-01

Full Text Available The purpose of the study was to find out whether the conceptual connection of emotion and motion is holding in the domain of personality traits. In a quantitative study 40 Estonian terms of personality traits were investigated and a conclusion was driven that, indeed, the qualities of emotionality and motion are perceived as co-present characteristics. In further data analysis some visualized measures were applied in order to get further insights into the hidden structure of the data. The self-organizing map (SOM analysis revealed an additional dimension of axiological evaluations present in the semantics and the SOM meta-analysis technique revealed groups of near synonymous words as well as gave overview of the more general structure common in the two data sets. The latter was tentatively explained by the person’s habitual level of activation.DOI: http://dx.doi.org/10.5128/ERYa6.21

History of experimental psychology from an Estonian perspective.

Science.gov (United States)

Allik, Jüri

2007-11-01

A short review of the development of experimental psychology from an Estonian perspective is presented. The first rector after the reopening of the University of Dorpat (Tartu) in 1802, Georg Friedrich Parrot (1767-1852) was interested in optical phenomena which he attempted to explain by introducing the concept of unconscious inferences, anticipating a similar theory proposed by Herman von Helmholtz 20 years later. One of the next rectors, Alfred Wilhelm Volkmann (1800-1878) was regarded by Edwin Boring as one of the founding fathers of the experimental psychology. Georg Wilhelm Struve (1793-1864) played an essential part in solving the problem of personal equations. Arthur Joachim von Oettingen (1836-1920) developed a theory of music harmony, which stimulated his student Wilhelm Friedrich Ostwald (1853-1932) to study colour harmony. Emil Kraepelin (1856-1926), the founder of modern psychiatry, is by far the most important experimental psychologist who has worked in Estonia. His successor Wladimir von Tchisch (1855-1922), another student of Wilhelm Wundt, continued Kraepelin's work in experimental psychology. The lives of Wolfgang Köhler (1887-1967), who was born in Reval (Tallinn), and Oswald Külpe (1862-1915), who graduated from the University of Dorpat, extended the link between the history of experimental psychology and Estonia. Karl Gustav Girgensohn (1875-1925), the founder of the Dorpat School of the psychology of religion, stretched the use of experimental methods to the study of religious experience.

Iseseisvusdeklaratsioonid 1776–1918. The Estonian Declaration of Sovereignty: An Example of the Civilizing Force of Hypocrisy

Directory of Open Access Journals (Sweden)

Hent Kalmo

2012-06-01

Full Text Available Sovereignty has been characterised as a form of “organized hypocrisy”, a system governed by a set of rules that are generally recognised as binding and yet are continually infringed upon by the most powerful actors. This idea can be extended to analyse the role of sovereignty within the Soviet Union. The Soviet Union was nominally governed by a Constitution which endowed the Union Republics with the right of secession, but there was no realistic possibility of exercising this right. One should not rush to conclude, however, that the actual wording of the Soviet Constitution of 1977 was entirely without relevance. As Jon Elster has argued, hypocrisy can have a “civilizing force” when the need to appear impartial and to retain public credibility forces actors to choose a strategy they would not choose otherwise. A good example of this kind of argumentative constraint is offered by the dilemma faced by the Soviet leadership after the mid-1980s, as it became reluctant to use military force to suppress independence movements within the Baltic States while, at the same time, promising to give more weight to the Soviet Constitution and respect the “sovereignty” of the Union Republics. In this setting, the ambiguity of the word “sovereignty” could be played upon by a whole gamut of political movements in order to further their agenda, from local communists eager to expand their autonomy within the Soviet system to those making an explicit bid for the restoration of independence. Significant legal and political changes could be justified as mere conclusions from the constitutionally recognised status of the Union Republics – a strategy which was all the more effective as Moscow struggled to formulate an alternative line of constitutional interpretation that could be used to counter the Baltic claims. This exchange of opinions escalated into a constitutional conflict in November 1988, when the Estonian Supreme Soviet responded to

Comparative analysis of idiom selection and sequencing 5 in Estonian basic school EFL coursebooks

Directory of Open Access Journals (Sweden)

Rita Anita Forssten

2017-05-01

Full Text Available The article investigates the selection and sequencing of the idioms encountered in two locally-produced and international coursebook series currently employed in Estonian basic schools. It is hypothesized that there exists a positive correlation between idioms’ difficulty and coursebooks’ language proficiency level. The hypothesis is tested through a statistical analysis of the idioms found which are categorized in terms of their analysability into three categories where category 1 includes analysable semi-literal idioms, category 2 comprises analysable semi-transparent idioms, and category 3 encompasses non-analysable opaque idioms, and then analysed through an online language corpus (British National Corpus. The results of the study reveal that the coursebook authors under discussion have disregarded idioms’ frequency as a criterion for selection or sequencing, whereas the factor utilized to some extent is the degree of analysability.

Electromagnetic reverberation chambers

CERN Document Server

Besnier, Philippe

2013-01-01

Dedicated to a complete presentation on all aspects of reverberation chambers, this book provides the physical principles behind these test systems in a very progressive manner. The detailed panorama of parameters governing the operation of electromagnetic reverberation chambers details various applications such as radiated immunity, emissivity, and shielding efficiency experiments.In addition, the reader is provided with the elements of electromagnetic theory and statistics required to take full advantage of the basic operational rules of reverberation chambers, including calibration proc

Dorsal skinfold chamber models in mice

Directory of Open Access Journals (Sweden)

Schreiter, Jeannine

2017-07-01

Full Text Available Background/purpose: The use of dorsal skinfold chamber models has substantially improved the understanding of micro-vascularisation in pathophysiology over the last eight decades. It allows pathophysiological studies of vascularisation over a continuous period of time. The dorsal skinfold chamber is an attractive technique for monitoring the vascularisation of autologous or allogenic transplants, wound healing, tumorigenesis and compatibility of biomaterial implants. To further reduce the animals’ discomfort while carrying the dorsal skinfold chamber, we developed a smaller chamber (the Leipzig Dorsal Skinfold Chamber and summarized the commercial available chamber models. In addition we compared our model to the common chamber. Methods: The Leipzig Dorsal Skinfold Chamber was applied to female mice with a mean weight of 22 g. Angiogenesis within the dorsal skinfold chamber was evaluated after injection of fluorescein isothiocyanate dextran with an Axio Scope microscope. The mean vessel density within the dorsal skinfold chamber was assessed over a period of 21 days at five different time points. The gained data were compared to previous results using a bigger and heavier dorsal skinfold model in mice. A PubMed and a patent search were performed and all papers related to “dorsal skinfold chamber” from 1 of January 2006 to 31 of December 2015 were evaluated regarding the dorsal skinfold chamber models and their technical improvements. The main models are described and compared to our titanium Leipzig Dorsal Skinfold Chamber model.Results: The Leipzig Dorsal Skinfold Chamber fulfils all requirements of continuous models known from previous chamber models while reducing irritation to the mice. Five different chamber models have been identified showing substantial regional diversity. The newly elaborated titanium dorsal skinfold chamber may replace the pre-existing titanium chamber model used in Germany so far, as it is smaller and lighter

Eesti patsient. Haiguse ja haige inimese kujutamise mudel 19. sajandi eesti kultuuris ja kirjasõnas. The Estonian Patient: A Model for the Representation of Illness and the Ill in 19th Century Estonian Culture and Letters

Directory of Open Access Journals (Sweden)

Janek Kraavi

2012-04-01

Full Text Available The portrait of the 18th and 19th century „Estonian patient” sketched in this article is a theoretical model of the ill person, based mainly on literary texts, but with reference to a variety of scientific and popular-scientific material. The point of departure is the classic postcolonial theorist, Frantz Fanon, in whose writings medicine, healing, and discourse on such topics are seen as the functioning of a specific colonial practice. The most notable characteristic of the figure of the Estonian patient is non-communicativeness. Communication is avoided and feared primarily because it has to be directed toward those in higher positions of power, or to institutions that embody power (the apothecary, the hospital. While these traits also characterize the separation between peasants and their rulers more generally, in a situation of illness the exclusion is felt with a double intensity. Sickness casts the peasant in a double bind: when in need of help or healing, contact across the divide between social rank, and – more broadly, between two cultures and ways of understanding the world, becomes unavoidable. In such situations, illness signifies an intensification of the gap in social standing. The ill person, who already stands on a lower rung of the social hierarchy, becomes all the more marginalized. In keeping with these observations, the real reason behind indecisiveness and refusal of medical treatment may well be an effort to avoid or postpone humiliation on the basis of lower social standing. Other contributing factors might include unconscious resistance – or even a conscious model of resistance – in the psyche, which manifests as an avoidance of communication. The content and motivating force for the model is not heroism, but rather a sense of shame. Indeed, behind the context of medical culture lurks ethnic and material isolation. The individual’s economic situation, living conditions, education and – most important – his

A combination drift chamber/pad chamber for very high readout rates

International Nuclear Information System (INIS)

Spiegel, L.; Cataldi, G.; Elia, V.; Mazur, P.; Murphy, C.T.; Smith, R.P.; Yang, W.; Alexopoulos, T.; Durandet, C.; Erwin, A.; Jennings, J.; Antoniazzi, L.; Introzzi, G.; Lanza, A.; Liguori, G.; Torre, P.; Arenton, M.; Conetti, S.; Cox, B.; Dukes, E.; Golovatyuk, V.; Hanlet, P.; McManus, A.; Nelson, K.; Recagni, M.; Segal, J.; Sun, J.; Ballagh, C.; Bingham, H.; Kaeding, T.; Lys, J.; Misawa, S.; Blankman, A.; Borodin, S.; Kononenko, W.; Newcomer, M.; Selove, W.; Trojak, T.; VanBerg, R.; Zhang, S.N.; Block, M.; Corti, G.; LeCompte, T.; Rosen, J.; Yao, T.; Boden, A.; Cline, D.; Ramachandran, S.; Rhoades, J.; Tokar, S.; Budagov, J.; Tsyganov, E.; Cao, Z.L.; He, M.; Wang, C.; Wei, C.; Zhang, N.; Chen, T.Y.; Yao, N.; Clark, K.; Jenkins, M.; Cooper, M.; Creti, P.; Gorini, E.; Grancagnolo, F.; Panareo, M.; Fortney, L.; Kowald, W.; Haire, M.; Judd, D.; Turnbull, L.; Wagoner, D.; Lau, K.; Mo, G.; Trischuk, J.

1991-11-01

Six medium-sized (∼1 x 2 m 2 ) drift chambers with pad and stripe readout have been constructed for and are presently operating in Fermi National Accelerator Laboratory experiment E-771. Each chamber module actually represents a pair of identical planes: two sets of anode wires, two sets of stripes, and two sets of pads. The wire planes are read out separately and represent X measurements in the coordinate system of the experiment. The twin stripe and pad planes are internally paired within the chamber modules; stripe signals represent Y measurements and pad signals combination X and Y measurements. Signals which develop on the stripes and pads are mirror (but inverted) images of what is seen on the wires. In addition to being used in the off-line pattern recognition, pad signals are also used as inputs to an on-line high transverse momentum (pt) trigger processor. While the techniques involved in the design and construction of the chambers are not novel, they may be of interest to experiments contemplating very large area, high rate chambers for future spectrometers

A combination drift chamber/pad chamber for very high readout rates

Energy Technology Data Exchange (ETDEWEB)

Spiegel, L.; Cataldi, G.; Elia, V.; Mazur, P.; Murphy, C.T.; Smith, R.P.; Yang, W. (Fermi National Accelerator Lab., Batavia, IL (United States)); Alexopoulos, T.; Durandet, C.; Erwin, A.; Jennings, J. (Wisconsin Univ., Madison, WI (United States)); Antoniazzi, L.; Introzzi, G.; Lanza, A.; Liguori, G.; Torre, P. (Pavia Univ. (Italy) Istituto Nazionale di Fisica Nucleare, Rome (Italy)); Arenton, M.; Conetti, S.

1991-11-01

Six medium-sized ({approx}1 {times} 2 m{sup 2}) drift chambers with pad and stripe readout have been constructed for and are presently operating in Fermi National Accelerator Laboratory experiment E-771. Each chamber module actually represents a pair of identical planes: two sets of anode wires, two sets of stripes, and two sets of pads. The wire planes are read out separately and represent X measurements in the coordinate system of the experiment. The twin stripe and pad planes are internally paired within the chamber modules; stripe signals represent Y measurements and pad signals combination X and Y measurements. Signals which develop on the stripes and pads are mirror (but inverted) images of what is seen on the wires. In addition to being used in the off-line pattern recognition, pad signals are also used as inputs to an on-line high transverse momentum (pt) trigger processor. While the techniques involved in the design and construction of the chambers are not novel, they may be of interest to experiments contemplating very large area, high rate chambers for future spectrometers.

Review of wire chamber aging

International Nuclear Information System (INIS)

Va'Vra, J.

1986-02-01

This paper makes an overview of the wire chamber aging problems as a function of various chamber design parameters. It emphasizes the chemistry point of view and many examples are drawn from the plasma chemistry field as a guidance for a possible effort in the wire chamber field. The paper emphasizes the necessity of variable tuning, the importance of purity of the wire chamber environment, as well as it provides a practical list of presently known recommendations. In addition, several models of the wire chamber aging are qualitatively discussed. The paper is based on a summary talk given at the Wire Chamber Aging Workshop held at LBL, Berkeley on January 16-17, 1986. Presented also at Wire Chamber Conference, Vienna, February 25-28, 1986. 74 refs., 18 figs., 11 tabs

Pilk ingliskeelse kirjanduse tõlgetele 18. sajandi lõpust 20. sajandi algusveerandini / A Look at Estonian Translations of English Literature from the late 18th Century to the Early 20th Century

Directory of Open Access Journals (Sweden)

Krista Mits

2012-06-01

Full Text Available The aim of this article is to provide an overview of translations of English literature into Estonian between 1779 and 1917. There is an attempt to analyse the texts by describing them on the basis of, or in their departure from, a text or texts that chronologically and logically precede them. The discussion includes the nature of the transfer and the changes that have been made to the text, either because they existed in the source or mediating text or because of the expectations or requirements in the receptor, i.e. Estonian culture. The translated texts are seen in their historical-cultural context. For the analysis, a corpus of translated texts – religious, fiction, drama and non-fiction (published in a book form was compiled. The general orientation of Estonia until the 1880s was to the German cultural sphere. So the first translations of English literature were made via a mediating language, which was German. English Puritan writers were introduced by the Pietist missionaries with the aim of spreading their teachings in the second half of the 18th century. At about the same time the narrative element was introduced into stories with religious content. Some internationally popular stories, e.g. the Inkle and Yarico story, later robinsonades, stories of slavery and plant at ion life, as well as Amer ican Indian st or ies wer e also t r anslat ed fr om Ger man. However, until  1875  ver  y  few  translations  of  English  literature  into  E stonian were  published.  The  last quarter of the 19th century saw an explosion in literary production: there was a substantial increase  both  in  the  number  of  translations  of  English  literature  into  E stonian  as  well  as diversification of genres. This continued into the first decade of the 20th  centur y,  when  the sociopolitical situation in Estonia changed. In addition, books came to be translated directly from  English,  although  many  translations �

Change of Pressing Chamber Conicalness at Briquetting Process in Briquetting Machine Pressing Chamber

Directory of Open Access Journals (Sweden)

Peter Križan

2012-01-01

Full Text Available In this paper, we will present the impact of the conical shape of a pressing chamber, an important structural parameter. Besides the known impact of the technological parameters of pressing chambers, it is also very important to pay attention to their structural parameters. In the introduction, we present a theoretical analysis of pressing chamber conicalness. An experiment aimed at detecting this impact was performed at our institute, and it showed that increasing the conicalness of a pressing chamber improves the quality of the final briquettes. The conicalness of the pressing chamber has a significanteffect on the final briquette quality and on the construction of briquetting machines. The experimental findings presented here show the importance of this parameter in the briquetting process.

Sleeve reaction chamber system

Science.gov (United States)

Northrup, M Allen [Berkeley, CA; Beeman, Barton V [San Mateo, CA; Benett, William J [Livermore, CA; Hadley, Dean R [Manteca, CA; Landre, Phoebe [Livermore, CA; Lehew, Stacy L [Livermore, CA; Krulevitch, Peter A [Pleasanton, CA

2009-08-25

A chemical reaction chamber system that combines devices such as doped polysilicon for heating, bulk silicon for convective cooling, and thermoelectric (TE) coolers to augment the heating and cooling rates of the reaction chamber or chambers. In addition the system includes non-silicon-based reaction chambers such as any high thermal conductivity material used in combination with a thermoelectric cooling mechanism (i.e., Peltier device). The heat contained in the thermally conductive part of the system can be used/reused to heat the device, thereby conserving energy and expediting the heating/cooling rates. The system combines a micromachined silicon reaction chamber, for example, with an additional module/device for augmented heating/cooling using the Peltier effect. This additional module is particularly useful in extreme environments (very hot or extremely cold) where augmented heating/cooling would be useful to speed up the thermal cycling rates. The chemical reaction chamber system has various applications for synthesis or processing of organic, inorganic, or biochemical reactions, including the polymerase chain reaction (PCR) and/or other DNA reactions, such as the ligase chain reaction.

Dual-chamber inflatable oil boom

International Nuclear Information System (INIS)

Blair, R.M.; Tedeschi, E.T.

1993-01-01

An elongated floating material containment boom section is described having a normally vertical ballasted skirt depending from flotation means, and convertible from a flattened collapsed condition to a deployable condition wherein buoyancy chamber means extending along the upper edge of said skirt are inflated to expanded buoyant configuration, including: a gas-impervious sleeve extending along the upper edge of said normally vertical skirt forming a first outer collapsible and inflatable flotation chamber, a first inflation valve connecting the interior of said sleeve with the ambient atmosphere, through which gas under pressure may be introduced into said sleeve to inflate said first buoyant outer flotation chamber, elongated gas-impervious tube means positioned inside said outer flotation chamber and forming second collapsible and inflatable internal flotation bladder chamber means, second inflation valve means connecting the interior of said bladder means through said outer flotation chamber to the ambient atmosphere through which gas under pressure may be introduced into said bladder means to inflate it forming said second flotation chamber means inside said outer flotation chamber

BEBC bubble chamber

CERN Multimedia

CERN PhotoLab

1972-01-01

Looking up into the interior of BEBC bubble chamber from the expansion cylinder. At the top of the chamber two fish-eye lenses are installed and three other fish-eye ports are blanked off. In the centre is a heat exchanger.

Climatic chamber ergometer

CSIR Research Space (South Africa)

Atkins, AR

1968-01-01

Full Text Available The design and calibration of an ergometer for exercising subjects during calorimetric studies in the climate chamber, are described. The ergometer is built into the climatic chamber and forms an integral part of the whole instrumentation system foe...

Vacuum Chambers for LEP sections

CERN Multimedia

1983-01-01

The picture shows sections of the LEP vacuum chambers to be installed in the dipole magnets (left) and in the quadrupoles (right). The dipole chamber has three channels: the beam chamber, the pumping duct where the NEG (non-evaporabe getter) is installed and the water channel for cooling (on top in the picture). The pumping duct is connected to the beam chamber through holes in the separating wall. The thick lead lining to shield radiation can also be seen. These chambers were manufactured as extruded aluminium alloy profiles.

Biological dosimetric studies in the Chernobyl radiation accident, on populations living in the contaminated areas (Gomel regions) and in Estonian clean-up workers, using FISH technique

International Nuclear Information System (INIS)

Darroudi, F.; Natarajan, A.T.

1996-01-01

In order to perform retrospective estimations of radiation doses seven years after the nuclear accident in Chernobyl, the frequencies of chromosomal aberrations in the peripheral blood lymphocytes of individuals living in contaminated areas around Chernobyl and the Estonian clean-up workers were determined. The first study group composed of 45 individuals living in four areas (i.e. Rechitsa, Komsomolski, Choiniki and Zaspa) in the vicinity (80-125 km) of Chernobyl and 20 individuals living in Minsk (control group - 340 km from Chernobyl). The second study group (Estonian clean-up workers) composed of 26 individuals involved in cleaning up the Chernobyl for a different period of time (up to 7 months) and a matched control group consisting of 9 probands. Unstable aberrations (dicentrics and rings) were scored in Giemsa stained preparations and stable aberrations (translocations) were analyzed using chromosome specific DNA libraries and fluorescence in situ hybridization (FISH) technique. For both study groups the estimated average dose is between 0,1-0,4 Gy. Among the people living in the contaminated areas in the vicinity of Chernobyl, a higher frequency of numerical aberrations (i.e. trisomy, hyper diploidy) was evident

Reference ionization chamber

International Nuclear Information System (INIS)

Golnik, N.; Zielczynski, M.

1999-01-01

The paper presents the design of ionization chamber devoted for the determination of the absolute value of the absorbed dose in tissue-equivalent material. The special attention was paid to ensure that the volume of the active gas cavity was constant and well known. A specific property of the chamber design is that the voltage insulators are 'invisible' from any point of the active volume. Such configuration ensures a very good time stability of the electrical field and defines the active volume. The active volume of the chamber was determined with accuracy of 0.3%. This resulted in accuracy of 0.8% in determination of the absorbed dose in the layer of material adherent to the gas cavity. The chamber was applied for calibration purposes at radiotherapy facility in Joint Institute for Nuclear Research in Dubna (Russia) and in the calibration laboratory of the Institute of Atomic Energy in Swierk. (author)

Plastic flashtube chambers

International Nuclear Information System (INIS)

Frisken, W.R.

1977-01-01

A brief discussion is given of the use and operation of plastic flashtube chambers. Gas leaks, electric pulsing, the glow discharge, and readout methods are considered. Three distinct problems with high rate applications deal with resolving time, dead time, and polarization/neutralization of the chamber

Wire chambers: Trends and alternatives

Energy Technology Data Exchange (ETDEWEB)

Regler, Meinhard

1992-05-15

The subtitle of this year's Vienna Wire Chamber Conference - 'Recent Trends and Alternative Techniques' - signalled that it covered a wide range of science and technology. While an opening Vienna talk by wire chamber pioneer Georges Charpak many years ago began 'Les funerailles des chambres a fils (the burial of wire chambers)', the contrary feeling this year was that wire chambers are very much alive!.

Prototype multiwire proportional chamber

CERN Multimedia

1975-01-01

Chambers of this type were initially developed within the Alpha project (finally not approved). They were designed such to minimize the radiation length with a view to a mass spectrometer of high resolution meant to replace the Omega detector. The chambers were clearly forerunners for the (drift) chambers later built for R606 with the novel technique of crimping the wires. See also photo 7510039X.

Nooreestlased arvustuses ja arvustajatena: lugejakontseptsioonist 20. sajandi alguse kriitikas. The Young Estonians as Critics and in the Eyes of Critics: On the Concept of the Reader in Early 20th Century Estonia

Directory of Open Access Journals (Sweden)

Marju Mikkel

2012-04-01

Full Text Available Until recently, the treatment of Estonian literature from the beginning of the 20th century has been influenced by the literary and cultural activities and programmatic articles of the Young Estonia movement. Current research on Young Estonia has addressed their more everyday realm of activity, which has heretofore received less attention: the Young Estonians as readers of the new works of their literary contemporaries and their practical criticism in reviews, particularly in daily newspapers. This article uses a receptionhistorical approach to analyze a large body of source material: the Young Estonians voluminous critical oeuvre in the period 1905–1915. The Young Estonians to be examined are all members of the core group of the movement: Gustav Suits, Bernhard Linde, Aino Kallas, Johannes Aavik, Villem Grünthal-Ridala, Jaan Oks, August Alle, and Johannes Semper. Within the larger framework of collective horizons of expectation, the focus of the study is the critics` concept of the reader. In addition, I will briefly discuss the dynamics of how such conceptions change. Research results indicate that in critical reviews from the time of Young Estonia, the topic of the reader was addressed from different standpoints depending on the addressee. Texts directed rhetorically toward a broad readership are characterized by the pursuit of objectivity and generalizations. When the concept of the reader is critic-centered, the text emphasizes subjective judgments, experience, and emotion. When focusing on the author and the text, the reviewer describes the influence on the reader, the cause of which is either the literary work directly or the author’s genius. In the case of polemic on the subject of reading, found mainly in responses written to reviews, the writer interprets another reader (or other readers` reading, opposing it to his or her own. When we follow the way the readers of Young Estonia and the Young Estonians themselves handle the

Miniature ionization chamber

International Nuclear Information System (INIS)

Alexeev, V.I.; Emelyanov, I.Y.; Ivanov, V.M.; Konstantinov, L.V.; Lysikov, B.V.; Postnikov, V.V.; Rybakov, J.V.

1976-01-01

A miniature ionization chamber having a gas-filled housing which accommodates a guard electrode made in the form of a hollow perforated cylinder is described. The cylinder is electrically associated with the intermediate coaxial conductor of a triaxial cable used as the lead-in of the ionization chamber. The gas-filled housing of the ionization chamber also accommodates a collecting electrode shaped as a rod electrically connected to the center conductor of the cable and to tubular members. The rod is disposed internally of the guard electrode and is electrically connected, by means of jumpers passing through the holes in the guard electrode, to the tubular members. The tubular members embrace the guard electrode and are spaced a certain distance apart along its entire length. Arranged intermediate of these tubular members are spacers secured to the guard electrode and fixing the collecting electrode throughout its length with respect to the housing of the ionization chamber

Wire chambers: Trends and alternatives

International Nuclear Information System (INIS)

Regler, Meinhard

1992-01-01

The subtitle of this year's Vienna Wire Chamber Conference - 'Recent Trends and Alternative Techniques' - signalled that it covered a wide range of science and technology. While an opening Vienna talk by wire chamber pioneer Georges Charpak many years ago began 'Les funerailles des chambres a fils (the burial of wire chambers)', the contrary feeling this year was that wire chambers are very much alive!

A new plant chamber facility PLUS coupled to the atmospheric simulation chamber SAPHIR

Science.gov (United States)

Hohaus, T.; Kuhn, U.; Andres, S.; Kaminski, M.; Rohrer, F.; Tillmann, R.; Wahner, A.; Wegener, R.; Yu, Z.; Kiendler-Scharr, A.

2015-11-01

A new PLant chamber Unit for Simulation (PLUS) for use with the atmosphere simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction Chamber) has been build and characterized at the Forschungszentrum Jülich GmbH, Germany. The PLUS chamber is an environmentally controlled flow through plant chamber. Inside PLUS the natural blend of biogenic emissions of trees are mixed with synthetic air and are transferred to the SAPHIR chamber where the atmospheric chemistry and the impact of biogenic volatile organic compounds (BVOC) can be studied in detail. In PLUS all important enviromental parameters (e.g. temperature, PAR, soil RH etc.) are well-controlled. The gas exchange volume of 9.32 m3 which encloses the stem and the leafes of the plants is constructed such that gases are exposed to FEP Teflon film and other Teflon surfaces only to minimize any potential losses of BVOCs in the chamber. Solar radiation is simulated using 15 LED panels which have an emission strength up to 800 μmol m-2 s-1. Results of the initial characterization experiments are presented in detail. Background concentrations, mixing inside the gas exchange volume, and transfer rate of volatile organic compounds (VOC) through PLUS under different humidity conditions are explored. Typical plant characteristics such as light and temperature dependent BVOC emissions are studied using six Quercus Ilex trees and compared to previous studies. Results of an initial ozonolysis experiment of BVOC emissions from Quercus Ilex at typical atmospheric concentrations inside SAPHIR are presented to demonstrate a typical experimental set up and the utility of the newly added plant chamber.

A new plant chamber facility, PLUS, coupled to the atmosphere simulation chamber SAPHIR

Science.gov (United States)

Hohaus, T.; Kuhn, U.; Andres, S.; Kaminski, M.; Rohrer, F.; Tillmann, R.; Wahner, A.; Wegener, R.; Yu, Z.; Kiendler-Scharr, A.

2016-03-01

A new PLant chamber Unit for Simulation (PLUS) for use with the atmosphere simulation chamber SAPHIR (Simulation of Atmospheric PHotochemistry In a large Reaction Chamber) has been built and characterized at the Forschungszentrum Jülich GmbH, Germany. The PLUS chamber is an environmentally controlled flow-through plant chamber. Inside PLUS the natural blend of biogenic emissions of trees is mixed with synthetic air and transferred to the SAPHIR chamber, where the atmospheric chemistry and the impact of biogenic volatile organic compounds (BVOCs) can be studied in detail. In PLUS all important environmental parameters (e.g., temperature, photosynthetically active radiation (PAR), soil relative humidity (RH)) are well controlled. The gas exchange volume of 9.32 m3 which encloses the stem and the leaves of the plants is constructed such that gases are exposed to only fluorinated ethylene propylene (FEP) Teflon film and other Teflon surfaces to minimize any potential losses of BVOCs in the chamber. Solar radiation is simulated using 15 light-emitting diode (LED) panels, which have an emission strength up to 800 µmol m-2 s-1. Results of the initial characterization experiments are presented in detail. Background concentrations, mixing inside the gas exchange volume, and transfer rate of volatile organic compounds (VOCs) through PLUS under different humidity conditions are explored. Typical plant characteristics such as light- and temperature- dependent BVOC emissions are studied using six Quercus ilex trees and compared to previous studies. Results of an initial ozonolysis experiment of BVOC emissions from Quercus ilex at typical atmospheric concentrations inside SAPHIR are presented to demonstrate a typical experimental setup and the utility of the newly added plant chamber.

Directed Energy Anechoic Chamber

Data.gov (United States)

Federal Laboratory Consortium — The Directed Energy Anechoic Chamber comprises a power anechoic chamber and one transverse electromagnetic cell for characterizing radiofrequency (RF) responses of...

Streamer chamber: pion decay

CERN Multimedia

1992-01-01

The real particles produced in the decay of a positive pion can be seen in this image from a streamer chamber. Streamer chambers consist of a gas chamber through which a strong pulsed electric field is passed, creating sparks as a charged particle passes through it. A magnetic field is added to cause the decay products to follow curved paths so that their charge and momentum can be measured.

Chemical composition of anthropogenic particles on needles collected close to the Estonian oil-shale power plants

International Nuclear Information System (INIS)

Meinander, O.

1995-01-01

Within the countries surrounding the Baltic Sea, north-eastern Estonia is among the most polluted areas. Emissions from the oil-shale power plants produce air pollution problems both locally and on a larger scale. In the atmosphere, pollutants mix and convert. Consequently, the particles deposited due to the use of oil-shale can have various chemical compositions. From the point of view of air chemistry, ecological effects and air pollution modelling, knowledge of the chemical composition of the deposited particles can be of great value. The aim of this work was to study the chemical composition of single anthropogenic particles occurring on needle surfaces in north-eastern Estonia and Southern Finland close to the Estonian oil-shale power plants. For the purpose, scanning electron microscopical microanalysis was used

PS wire chamber

CERN Multimedia

1970-01-01

A wire chamber used at CERN's Proton Synchrotron accelerator in the 1970s. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

Directional muon jet chamber for a muon collider (Groovy Chamber)

International Nuclear Information System (INIS)

Atac, M.

1996-10-01

A directional jet drift chamber with PAD readout is proposed here which can select vertex originated muons within a given time window and eliminate those muons which primarily originate upstream, using only a PAD readout. Drift time provides the Z-coordinate, and the center of gravity of charge distribution provides the r-ψ coordinates. Directionality at the trigger level is obtained by the timing measurement from the PAD hits within a given time window. Because of the long drift time between the bunch crossings, a muon collider enables one to choose a drift distance in the drift chamber as long as 50 cm. This is an important factor in reducing cost of drift chambers which have to cover relatively large areas

Pencil-shaped radiation detection ionization chamber

International Nuclear Information System (INIS)

Suzuki, A.

1979-01-01

A radiation detection ionization chamber is described. It consists of an elongated cylindrical pencil-shaped tubing forming an outer wall of the chamber and a center electrode disposed along the major axis of the tubing. The length of the chamber is substantially greater than the diameter. A cable connecting portion at one end of the chamber is provided for connecting the chamber to a triaxial cable. An end support portion is connected at the other end of the chamber for supporting and tensioning the center electrode. 17 claims

Bernhard Linde. Noor-Eesti vooriülem. Bernhard Linde. Leader of the Young Estonian Pack

Directory of Open Access Journals (Sweden)

Jaanus Kulli

2012-04-01

Full Text Available Bernhard Linde (1886–1954 was a recognized and prolific Estonian theatre critic of the first quarter of the 20th century, who mediated and propagated western as well as eastern European theatrical innovations. In addition, he was active as a literary and art critic, publisher, and proponent of libraries, to a modest extent he was a prose writer and poet. Unquestionably, however, Bernhard Linde’s most prominent role was as one of the founding members of the literary movement Young Estonia. He was the group’s first general manager; later on, he was the secretary of the Estonian Writers’ Association Young Estonia, and the chairman of the board of the Young Estonia Publishing House. Linde’s formal education culminated in graduation from Tartu University as a Slavic philologist; he was the only member of the Young Estonia group to demonstrate serious and sustained interest toward Slavic cultures and peoples. Linde was a contradictory figure, evoking a range of responses from his contemporaries: on the one hand, there was the unbelievably broad range of his participation in cultural life, his organizing skills and business instincts in directing publishing houses; on the other hand, a superficiality in his writings, his often rash and subjective style as a critic, and his financial intrigues. If one adds in Linde’s stubbornness, egocentrism, and intense spirit of protest, which often led to lawsuits, the outcome is the portrait of an extremely complicated, fascinating, and passionate man—both in his creative work and his personal life Linde guaranteed a place for himself in literary history through a small catch of texts: a few foundational essays (for example, on August Kitzberg, a translation of Balzac’s Le père Goriot, the essay collection Omad ja võõrad (Own and Foreign and a travel book focusing on the literature and theatre of eastern Europe (Loova Kesk-Euroopa Poole (Toward A Creative Central Europe. The prominent public

Improvement of Swirl Chamber Structure of Swirl-Chamber Diesel Engine Based on Flow Field Characteristics

Directory of Open Access Journals (Sweden)

Wenhua Yuan

2014-10-01

Full Text Available In order to improve combustion characteristic of swirl chamber diesel engine, a simulation model about a traditional cylindrical flat-bottom swirl chamber turbulent combustion diesel engine was established within the timeframe of the piston motion from the bottom dead centre (BDC to the top dead centre (TDC with the fluent dynamic mesh technique and flow field vector of gas in swirl chamber and cylinder; the pressure variation and temperature variation were obtained and a new type of swirl chamber structure was proposed. The results reveal that the piston will move from BDC; air in the cylinder is compressed into the swirl chamber by the piston to develop a swirl inside the chamber, with the ongoing of compression; the pressure and temperature are also rising gradually. Under this condition, the demand of diesel oil mixing and combusting will be better satisfied. Moreover, the new structure will no longer forma small fluid retention zone at the lower end outside the chamber and will be more beneficial to the mixing of fuel oil and air, which has presented a new idea and theoretical foundation for the design and optimization of swirl chamber structure and is thus of good significance of guiding in this regard.

Establishment of a radon test chamber

International Nuclear Information System (INIS)

Chen Chingjiang; Liu Chichang; Lin Yuming

1993-01-01

A walk-in type radon test chamber of 23 m 3 has been built for testing and calibration of radon measurement instruments. The environmental conditions of the test chamber can be varied within a wide range of values. The design objectives specification, monitoring instruments and testing results of this chamber are discussed. This test chamber is available for domestic radon researchers and its accuracy can be traced to the international standard. A routine intercomparison study will be held annually by using this chamber. Other tests like radon progeny and thoron standard may also be performed in this chamber. (1 fig.)

Euroopa-ihalusest taasiseseisvusperioodi autobiograafiates / European Identifications in Post-Soviet Estonian Life Writing

Directory of Open Access Journals (Sweden)

Leena Kurvet-Käosaar

2016-12-01

Full Text Available Teesid: Artikkel käsitleb Euroopat kui identiteedi ja minaduse sõlmpunkti ja enesevahenduse mõõdet kolmes omaelulookirjutuslikus teoses, mille autoritel on väljapaistev positsioon eesti (kirjanduskultuuris: Jaan Krossi „Kallid kaasteelised“ (2003a, 2008, Jaan Kaplinski „Isale“ (2003 ja Tõnu Õnnepalu „Flandria päevik“ (2007. Artikkel keskendub sellele, kuidas küsimused suhestumise trajektooridest Euroopa mäluruumiga haakuvad Krossi, Kaplinski ja Õnnepalu teostes esiletuleva enesemääratlusliku raamiga, neist lähtuvate vastastikuse kõnetuse võimaluste ja oma aegruumi tunnetuse pidepunktidega. Kuigi tegemist on eesti keeles ilmunud ning eesti kultuuriruumi lugejale suunatud teostega, seostuvad neis väljajoonistuvad enesemääratluse teljed viimastel aastakümnetel hoogustunud laiemate aruteludega ühtse Euroopa mäluraami ning identiteedi võimalikkusest ja selle toimimise tingimustest.   In recent years, the question of the possibility of a shared frame of memory and identity in Europe, its desired manifestations and practices for attaining it as well as its obstacles and limitations to it have gained prominence in scholarly debates in a number of disciplines. In terms of the division between the East and West of Europe, these discussions take as their starting point the collapse of the Soviet system in 1989 as well as the European Union enlargement in 2004. Far from uniform, the exceedingly complex and contrasting ranges of arguments have put forward a varied palette of perspectives and suggestions about possible and desirable implications of Europe in different socio-political and cultural configurations. Taking these debates as my starting point, the current article offers an analysis of three life writing works by contemporary Estonian authors and intellectuals, Kallid kaasteelised (Dear Fellow Travellers, 2003, 2008 by Jaan Kross, Isale (To My Father, 2003 by Jaan Kaplinski and Flandria päevik (The Flemish Diary

National Ignition Facility Target Chamber

International Nuclear Information System (INIS)

Wavrik, R W; Cox, J R; Fleming, P J

2000-01-01

On June 11, 1999 the Department of Energy dedicated the single largest piece of the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory (LLNL) in Livermore, California. The ten (10) meter diameter aluminum target high vacuum chamber will serve as the working end of the largest laser in the world. The output of 192 laser beams will converge at the precise center of the chamber. The laser beams will enter the chamber in two by two arrays to illuminate 10 millimeter long gold cylinders called hohlraums enclosing 2 millimeter capsule containing deuterium, tritium and isotopes of hydrogen. The two isotopes will fuse, thereby creating temperatures and pressures resembling those found only inside stars and in detonated nuclear weapons, but on a minute scale. The NIF Project will serve as an essential facility to insure safety and reliability of our nation's nuclear arsenal as well as demonstrating inertial fusion's contribution to creating electrical power. The paper will discuss the requirements that had to be addressed during the design, fabrication and testing of the target chamber. A team from Sandia National Laboratories (SNL) and LLNL with input from industry performed the configuration and basic design of the target chamber. The method of fabrication and construction of the aluminum target chamber was devised by Pitt-Des Moines, Inc. (PDM). PDM also participated in the design of the chamber in areas such as the Target Chamber Realignment and Adjustment System, which would allow realignment of the sphere laser beams in the event of earth settlement or movement from a seismic event. During the fabrication of the target chamber the sphericity tolerances had to be addressed for the individual plates. Procedures were developed for forming, edge preparation and welding of individual plates. Construction plans were developed to allow the field construction of the target chamber to occur parallel to other NIF construction activities. This was

The Problems of Estonian R&D and Innovation Strategy and the Demand-Side Innovation Policies

Directory of Open Access Journals (Sweden)

Tõnu Roolaht

2012-12-01

Full Text Available The second larger Estonian R&D and Innovation Strategy ‘Knowledge-based Estonia 2007-2013’ is aimed at continuing the advancement of research and development efforts towards an innovative knowledge-based society and economic system in Estonia. Fostering of knowledge-based high-tech industries is seen as paramount for retaining country’s competitive advantage. However, the mid-term evaluations indicate that several goals of the strategy might not be achievable by 2013. In fact, the policy measures have been much more successful in developing scientific research, as indicated by increased international publication, number of patents, and number of researchers and engineers. The advances in development of high-tech products and services through innovations are noticeable but less prominent. The purpose of this study is to suggest the role for demand-side innovation policies in helping to advance commercial development and innovation

Cloud Chamber

DEFF Research Database (Denmark)

Gfader, Verina

Cloud Chamber takes its roots in a performance project, titled The Guests 做东, devised by Verina Gfader for the 11th Shanghai Biennale, ‘Why Not Ask Again: Arguments, Counter-arguments, and Stories’. Departing from the inclusion of the biennale audience to write a future folk tale, Cloud Chamber......: fiction and translation and translation through time; post literacy; world picturing-world typing; and cartographic entanglements and expressions of subjectivity; through the lens a social imaginary of worlding or cosmological quest. Art at its core? Contributions by Nikos Papastergiadis, Rebecca Carson...

wire chamber

CERN Multimedia

1985-01-01

Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

Wire chamber

CERN Multimedia

Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

wire chamber

CERN Multimedia

Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

Criteria for controlled atmosphere chambers

International Nuclear Information System (INIS)

Robinson, J.N.

1980-03-01

The criteria for design, construction, and operation of controlled atmosphere chambers intended for service at ORNL are presented. Classification of chambers, materials for construction, design criteria, design, controlled atmosphere chamber systems, and operating procedures are presented. ORNL Safety Manual Procedure 2.1; ORNL Health Physics Procedure Manual Appendix A-7; and Design of Viewing Windows are included in 3 appendices

Proceedings of workshop on streamer chamber

International Nuclear Information System (INIS)

Itoh, Hidihiko; Takahashi, Kaoru; Hirose, Tachishige; Masaike, Akira

1978-08-01

For high accuracy observation of multiple-body reactions, a vertex detector of high efficiency is essential. A bubble chamber, though excellent for tracks detection, is problematic in statistics accuracy. The vertex detector with a wire chamber, while better in this respect, difficult in multiple-particle detection etc. The workshop has had several meetings on a streamer chamber as a detector combining features of both bubble chamber and counter, with emphasis on tracks observation in avalanche mode and recordings not using films. Contents are on streamer chamber gas, analytical photography, data processing, simulation program, etc. (Mori, K.)

Chemistry of the Estonian oil-shale kukersite

Energy Technology Data Exchange (ETDEWEB)

Kogerman, P N

1931-01-01

Estonian oil shale is one of the oldest and richest oil shales in the world. The deposits occur in the Middle-Ordovician strata having a total thickness of 2.2 meters. The ultimate composition of the kerogen varied within the following limits: carbon 76.5 to 76.7 percent, hydrogen 9.1 to 9.2 percent, nitrogen 0.2 to 0.4 percent, sulfur 1.6 to 2.2 percent, chlorine 0.5 to 0.7 percent, and oxygen (by difference) 11.2 to 12.2 percent. The composition of kukersite kerogen corresponds nearly to the empirical formula (C/sub 8/H/sub 11/O)n. One of the most significant differences between kukersite, coal, and lignite is the amount of alkali-soluble substances present. Kukersite has almost no humic acids. Samples of kukersite were brominated and chlorinated. The halogenated shales showed a solubility in absolute alcohol of 26 percent compared to only 0.31 percent for untreated shale. Enriched shale (4.5 percent ash) did not react with chlorine as much as did raw shale. Apparently the mineral matter acted catalytically during chlorination. The amount of soluble extract obtained by solvent treatment of kukersite ranged from 0.22 percent with chloroform to 2.20 percent with tetrachloroethane. Heat was the most effective agent for the depolymerization of kukersite kerogen. The percentage loss of weight due to drying in air was much less than in the presence of carbon dioxide. The results indicated that on drying in air, the powdered shale loses water and a volatile substance, probably the oxides of carbon, up to 80/sup 0/C. Carbon dioxide was also found to be present in the gases eliminated at the temperature of initial decomposition. Pulverized shale, heated for 6 hours at 220/sup 0/C, lost 2.6 percent of its weight; its solubility in carbon disulfide was 2.11 percent. Kukersite kerogen was formed from compounds that were resistent to bacteriological decomposition, such as waxes and resins, plus decomposition products of proteins, cellulose, and putrefaction products of

Gridded Ionization Chamber

International Nuclear Information System (INIS)

Manero Amoros, F.

1962-01-01

In the present paper the working principles of a gridded ionization chamber are given, and all the different factors that determine its resolution power are analyzed in detail. One of these devices, built in the Physics Division of the JEN and designed specially for use in measurements of alpha spectroscopy, is described. finally the main applications, in which the chamber can be used, are shown. (Author) 17 refs

The CLEO III drift chamber

CERN Document Server

Peterson, D; Briere, R A; Chen, G; Cronin-Hennessy, D; Csorna, S; Dickson, M; Dombrowski, S V; Ecklund, K M; Lyon, A; Marka, S; Meyer, T O; Patterson, J R; Sadoff, A; Thies, P; Thorndike, E H; Urner, D

2002-01-01

The CLEO group at the Cornell Electron Storage Ring has constructed and commissioned a new central drift chamber. With 9796 cells arranged in 47 layers ranging in radius from 13.2 to 79 cm, the new drift chamber has a smaller outer radius and fewer wires than the drift chamber it replaces, but allows the CLEO tracking system to have improved momentum resolution. Reduced scattering material in the chamber gas and in the inner skin separating the drift chamber from the silicon vertex detector provides a reduction of the multiple scattering component of the momentum resolution and an extension of the usable measurement length into the silicon. Momentum resolution is further improved through quality control in wire positioning and symmetry of the electric fields in the drift cells which have provided a reduction in the spatial resolution to 88 mu m (averaged over the full drift range).

OPAL Jet Chamber Prototype

CERN Multimedia

OPAL was one of the four experiments installed at the LEP particle accelerator from 1989 - 2000. OPAL's central tracking system consists of (in order of increasing radius) a silicon microvertex detector, a vertex detector, a jet chamber, and z-chambers. All the tracking detectors work by observing the ionization of atoms by charged particles passing by: when the atoms are ionized, electrons are knocked out of their atomic orbitals, and are then able to move freely in the detector. These ionization electrons are detected in the dirfferent parts of the tracking system. This piece is a prototype of the jet chambers

Absorbed dose measurement by using tissue equivalent ionization chamber (pair ionization chamber) in the Yayoi reactor

International Nuclear Information System (INIS)

Sasuga, N.; Okamura, K.; Terakado, T.; Mabuchi, Y.; Nakagawa, T.; Sukegawa, Toshio; Aizawa, C.; Saito, I.; Oka, Yoshiaki

1998-01-01

Each dose rate of neutron and gamma ray in the thermal column of the Yayoi reactor, in which an epithermal neutron field will be used for the boron neutron capture therapy, was measured by using a tissue equivalent ionization chamber and a graphite chamber. The tissue equivalent ionization chamber has some response to both neutron and gamma ray, but the graphite chamber has a few response to the neutron, so called pair ionization chamber method. The epithermal neutron fluxes of the thermal column were calculated by ANISN (one dimensional neutron-gamma transport code). A measured value for gamma dose rate by the pair ionization chamber agrees relevantly with a calculated result. For neutron dose rate, however, the measured value was too much small in comparison with the calculated result. The discrepancy between the measured value and the calculated result for neutron dose rate is discussed in detail in the report. (M. Suetake)

Development of secondary chamber for tar cracking-improvement of wood pyrolysis performance in pre-vacuum chamber

Science.gov (United States)

Siahaan, S.; Homma, H.; Homma, H.

2018-02-01

Energy crisis and global warming, in other words, climate change are critical topics discussed in various parts of the world. Global warming primarily result from too much emission of carbon dioxide (CO2) in the atmosphere. To mitigate global warming, or climate change and improve electrification in rural areas, wood pyrolysis technology is developed in a laboratory scale, of which gases are directly applicable to the gas engine generator. Our laboratory has developed a prototype of wood pyrolysis plant with a pre-vacuum chamber. However, tar yield was around 40 wt% of feedstock. This research aims to reduce tar yield by secondary tar cracking. For the secondary tar cracking, a secondary pre-vacuum chamber is installed after primary pre-vacuum chamber. Gases generated in the primary pre-vacuum chamber are lead into the secondary chamber that is heated up to 1000 K. This paper reports performance of the secondary chamber for secondary tar cracking in homogeneous mode and heterogeneous mode with char.

Proportional chamber with data analog output

International Nuclear Information System (INIS)

Popov, V.E.; Prokof'ev, A.N.

1977-01-01

A proportional multiwier chamber is described. The chamber makes it possible to determine angles at wich a pion strikes a polarized target. A delay line, made of 60-core flat cable is used for removing signals from the chamber. From the delay line, signals are amplified and successively injected into shapers and a time-to-amplitude converter. An amplitude of the time-to amplitude converter output signal unambiguously determines the coordinate of a point at which a particle strikes the chamber plane. There are also given circuits of amplifiers, which consist of a preamplifier with gain 30 and a main amplifier with adjustable gain. Data on testing the chamber with the 450 MeV pion beam is demonstrated. The chamber features an efficiency of about 98 per cent under load of 2x10 5 s -1

Eesti Rahva Muuseumi strateegiad ja praktikad rahvaga suhtlemisel muuseumi algusaastatel / Estonian National Museum: Public communication strategies and practices in the initial years

Directory of Open Access Journals (Sweden)

Piret Õunapuu

2012-01-01

Full Text Available Until recently the museum phenomenon as the valuator of the indigenous culture in the context of the awakening national consciousness has received little attention. The evolution of the idea of the Estonian National Museum (ENM and its realization reflects the story of the Estonian people maturing into a nation. The museum was founded by a few dedicated persons and it took a long time before the general public recognised it as the museum for the Estonian people. The main purpose of this research is to ascertain how relations developed between the public and the museum in its initial years and what were the museum strategies in declaring its objectives. After the official foundation of the ENM in 1909 the museum narrative can be divided into two main parts. First, work inside the museum, the compilation and arrangement of collections. This was, above all, the work of the collection committee and organizing heritage collection trips. Collections constitute the basis of a museum – therefore the primary and most important task of the established museum was the collection of heritage items. The collections were started immediately after the foundation of the museum; within the first ten years approximately 20,000 items were collected, approximately two thirds of the items in the years 1911–1913. The phenomenon that a museum where people worked mainly without a salary for the benefit of their homeland, with the set aim to empty the whole of Estonia of heritage items parish by parish and succeeded in engaging dozens and dozens of people for this work, is probably exceptional in world history. As a result, the museum acquired not only voluminous but also valuable item collections, which reached the museum before the devastating First World War. The timing was favourable. There were enough old artefacts left, although most collectors complained in their diaries that there was nothing interesting to be found any more. However, the majority of the

wire chamber

CERN Multimedia

Was used in ISR (Intersecting Storage Ring) split field magnet experiment. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

Proton beam monitor chamber calibration

International Nuclear Information System (INIS)

Gomà, C; Meer, D; Safai, S; Lorentini, S

2014-01-01

The first goal of this paper is to clarify the reference conditions for the reference dosimetry of clinical proton beams. A clear distinction is made between proton beam delivery systems which should be calibrated with a spread-out Bragg peak field and those that should be calibrated with a (pseudo-)monoenergetic proton beam. For the latter, this paper also compares two independent dosimetry techniques to calibrate the beam monitor chambers: absolute dosimetry (of the number of protons exiting the nozzle) with a Faraday cup and reference dosimetry (i.e. determination of the absorbed dose to water under IAEA TRS-398 reference conditions) with an ionization chamber. To compare the two techniques, Monte Carlo simulations were performed to convert dose-to-water to proton fluence. A good agreement was found between the Faraday cup technique and the reference dosimetry with a plane-parallel ionization chamber. The differences—of the order of 3%—were found to be within the uncertainty of the comparison. For cylindrical ionization chambers, however, the agreement was only possible when positioning the effective point of measurement of the chamber at the reference measurement depth—i.e. not complying with IAEA TRS-398 recommendations. In conclusion, for cylindrical ionization chambers, IAEA TRS-398 reference conditions for monoenergetic proton beams led to a systematic error in the determination of the absorbed dose to water, especially relevant for low-energy proton beams. To overcome this problem, the effective point of measurement of cylindrical ionization chambers should be taken into account when positioning the reference point of the chamber. Within the current IAEA TRS-398 recommendations, it seems advisable to use plane-parallel ionization chambers—rather than cylindrical chambers—for the reference dosimetry of pseudo-monoenergetic proton beams. (paper)

Client-centeredness of Finnish and Estonian nursing students and the support from nursing education to develop it. Students' self-evaluation.

Science.gov (United States)

Kalam-Salminen, Ly; Valkonen, Marjo-Riitta; Aro, Ilme; Routasalo, Pirkko

2013-10-01

The purpose of this comparative study is to describe the differences between Finnish and Estonian students evaluations about their client-centeredness and educational support they received to develop it. Client-centeredness has many positive effects on the quality and effectiveness of care. However, some deficiencies have been identified in the client-centeredness of nursing staff. Research on the subject has been limited, and we lack knowledge of graduating students' competence in client-centeredness and the support of their education to develop it. The sample consisted of 390 undergraduate nursing students, 195 from Finland and 195 from Estonia. The data were collected in 2009 using the structured five-point scale questionnaire. The questionnaire was designed to measure students' client-centeredness and the educational support they received from nursing education. The data were analyzed by the PASW Statistics 18-programme using descriptive statistics, Kolmogorov-Smirnov test and Mann-Whitney U-test. Predominantly, students in both countries evaluated their level of client-centeredness high. The Estonian students generally evaluated their client-centeredness higher compared to the Finnish students. The same applied to support provided by nursing education. The greatest differences were related to education and particularly theoretical teaching. In Estonia, students' client-centeredness manifested itself more in politeness and willingness to serve clients, whereas respecting the clients' values was emphasized in Finland. Students' requisites, referred here as knowledge, skills and abilities to implement client-centered nursing, for client-centeredness had deficiencies, and the support from education was also the weakest regarding these aspects. In future, education on development of nursing activities, acquisition of knowledge and services provided by health care as well as legislation should be enhanced, since these areas proved the most difficult for the students

Pressure vessel rupture within a chamber: the pressure history on the chamber wall

International Nuclear Information System (INIS)

Baum, M.R.

1989-04-01

Generally there is a large number of pressure vessels containing high pressure gas on power stations and chemical plant. In many instances, particularly on power plant, these vessels are within the main building. If a pressure vessel were to fail, the surrounding structures would be exposed to blast loads and the forces resulting from jets of fluid issuing from the breached vessel. In the case where the vessel is in a relatively closed chamber there would also be a general overpressurisation of the chamber. At the design stage it is therefore essential to demonstrate that the plant could be safely shut down in the event of a pressure vessel failure, that is, it must be shown that the chamber will not collapse thus putting the building at risk or hazarding equipment essential for a safe shut down. Such an assessment requires the loads applied to the chamber walls, roof, etc. to be known. (author)

Wet drift chambers for precise luminosity

International Nuclear Information System (INIS)

Anderson, B.E.; Kennedy, B.W.; Ahmet, K.; Attree, D.J.; Barraclough, G.A.; Cresswell, M.J.; Hayes, D.A.; Miller, D.J.; Selby, C.; Sherwood, P.

1994-01-01

A set of high-precision compact drift chambers has been a vital component of the OPAL luminosity monitor since the start of data-taking at LEP. They were augmented in 1992 by the addition of Small Angle Reference Chambers with a very similar design to the original chamber. The performance of the chambers is reviewed, highlighting both the importance of using polyalkylene glycol (Breox) to maintain a uniform and parallel electric field and the construction techniques used to sustain the required field strength. We describe some of the operating problems, with their solutions, and show how the chambers have been used in achieving a systematic error of 0.41% on the luminosity measurement. ((orig.))

The Boycott effect in magma chambers

Science.gov (United States)

Blanchette, F.; Peacock, T.; Bush, J. W. M.

2004-03-01

We investigate the plausibility of the stratified Boycott effect as a source of layering in magma chambers. Crystal settling within the magma chamber will generate buoyant fluid near the sloping sidewalls whose vertical ascent may be limited by the ambient stratification associated with vertical gradients in SiO2. The resulting flow may be marked by a layered structure, each layer taking the form of a convection cell spanning the lateral extent of the magma chamber. Using parameters relevant to magma chambers, we estimate that such convection cells would be established over a timescale of a month and have a depth on the order of 4m, which is roughly consistent with field observations of strata within solidified chambers.

The KEK 1 m hydrogen bubble chamber

International Nuclear Information System (INIS)

Doi, Yoshikuni; Araoka, Osamu; Hayashi, Kohei; Hayashi, Yoshio; Hirabayashi, Hiromi.

1978-03-01

A medium size hydrogen bubble chamber has been constructed at the National Laboratory for High Energy Physics, KEK. The bubble chamber has been designed to be operated with a maximum rate of three times per half a second in every two second repetition time of the accelerator, by utilizing a hydraulic expansion system. The bubble chamber has a one meter diameter and a visible volume of about 280 l. A three-view stereo camera system is used for taking photographic pictures of the chamber. A 2 MW bubble chamber magnet is constructed. The main part of the bubble chamber vessel is supported by the magnet yoke. The magnet gives a maximum field of 18.4 kG at the centre of the fiducial volume of the chamber. The overall system of the KEK 1 m hydrogen bubble chamber facility is described in some detail. Some operational characteristics of the facility are also reported. (auth.)

Estonian energy system: Proposals for the implementation of a cogeneration strategy

International Nuclear Information System (INIS)

Lund, H.; Hvelplund, F.; Ingermann, K.; Kask, U.

2000-01-01

Since the Soviet era Estonia inherited oil-shale-based electricity plants, with a capacity of 3000 MW. Oil shale now provides Estonia with very low electricity prices. However, most of the stations are very old. Half of them were built before 1965, and sooner or later the old oil shale production units will have to be replaced. Estonia will then have to face serious increases in electricity production prices. At the same time Estonia has problems in restoring its district heating systems. The prices are rising and may consumers have converted to other heating sources such as electric heating. The major long-term strategic policy choices to make in Estonia are to decide (1) whether the oil shale power stations should be replaced by new centralized production units such as new oil shale stations or nuclear power, or (2) whether the electricity production should be decentralized. In the centralized solution (oil shale or nuclear power), the domestic heating will be left to boilers or electric heating leading to a very high primary energy supply. In the decentralized solution, Estonia could benefit from the advantage of cogeneration leading to very low fuel consumption. But this latter strategy depends on the restoration of the district heating systems. This article seeks to form a strategy to improve the efficiency of the Estonian energy system by increasing the use of cogeneration. (author)

Loss of ions in cavity ionization chambers

International Nuclear Information System (INIS)

Takata, N.; Tran, N.T.; Kim, E.; Marsoem, P.; Kurosawa, T.; Koyama, Y.

2005-01-01

Ion losses due to initial recombination, volume recombination, and back diffusion were each determined by measurements and calculations for different size cylindrical ionization chambers and spherical ionization chambers. By measuring signal currents from these ionization chambers irradiated with 60 Co gamma rays, two groups of ion losses were obtained. (Group 1) Ion loss due to initial recombination and diffusion, which changes proportionally to the inverse of the voltage applied to the ionization chambers; (and group 2) ion loss due to volume recombination, which changes proportionally to the inverse of the square of the applied voltage. The diffusion loss was obtained separately by computing electric field distributions in the ionization chambers. It was found that diffusion loss is larger than initial recombination loss for the cylindrical ionization chambers and vise versa for the spherical ionization chambers

Investigation of very long jet chambers

Energy Technology Data Exchange (ETDEWEB)

Burckhart, H J; Va' vra, J; Zankel, K; Dudziak, U; Schaile, D; Schaile, O; Igo-Kemenes, P; Lennert, P

1986-04-01

The electrostatic properties and the performances of very long jet chambers have been investigated. Using 100 MHz FADC wave form digitisers, the tracking accuracy, the charge division and the dE/dx performance of two chambers, one with 4.5 m long tungsten wires and one with 4 m long highly resistive ''NiCoTi'' wires have been studied. The geometry of the chambers was chosen to define some of the design parameters of the jet chamber for the OPAL detector for LEP.

IFE chamber technology testing program in NIF and chamber development test plan

International Nuclear Information System (INIS)

Abdou, M.A.

1995-01-01

Issues concerning chamber technology testing program in NIF involving: criteria for evaluation/prioritization of experiments, engineering scaling requirements for test article design and material selection and R and D plan prior to NIF testing were addressed in this paper. In order to maximize the benefits of testing program in NIF, the testing in NIF should provide the experimental data relevant to DEMO design choice or to DEMO design predictive capability by utilizing engineering scaling test article designs. Test plans were developed for 2 promising chamber design concepts. Early testing in non-fusion/non-ignition prior to testing in ignition facility serves a critical role in chamber R and D test plans in order to reduce the risks and costs of the more complex experiments in NIF

Impedances in lossy elliptical vacuum chambers

International Nuclear Information System (INIS)

Piwinski, A.

1994-04-01

The wake fields of a bunched beam caused by the resistivity of the chamber walls are investigated for a vacuum chamber with elliptical cross section. The longitudinal and transverse impedances are calculated for arbitrary energies and for an arbitrary position of the beam in the chamber. (orig.)

Investigation of very long jet chambers

Energy Technology Data Exchange (ETDEWEB)

Burckhart, H J; Va' vra, J; Zankel, K; Dudziak, U; Schaile, D; Schaile, O; Igo-Kemenes, P; Lennert, P

1986-04-01

The electrostatic properties and the performances of very long jet chambers have been investigated. Using 100 MHz FADC wave form digitisers, the tracking accuracy, the charge division and the dE/dx performance of two chambers, one with 4.5 m long tungsten wires and one with 4 m long highly resistive ''NiCoTi'' wires have been studied. The geometry of the chambers was chosen to define some of the design parameters of the jet chamber for the OPAL detector for LEP. (orig.).

Chamber propagation physics for heavy ion fusion

International Nuclear Information System (INIS)

Callahan, D.A.

1995-01-01

Chamber transport is an important area of study for heavy ion fusion. Final focus and chamber-transport are high leverage areas providing opportunities to significantly decrease the cost of electricity from a heavy ion fusion power plant. Chamber transport in two basic regimes is under consideration. In the low chamber density regime (approx-lt 0.003 torr), ballistic or nearly-ballistic transport is used. Partial beam neutralization has been studied to offset the effects of beam stripping. In the high chamber density regime (approx-gt.1 torr), two transport modes (pinched transport and channel transport) are under investigation. Both involve focusing the beam outside the chamber then transporting it at small radius (∼ 2 mm). Both high chamber density modes relax the constraints on the beam quality needed from the accelerator which will reduce the driver cost and the cost of electricity

Multiwire proportional chamber and multistage avalanche chamber with low concentration photoionization gas

International Nuclear Information System (INIS)

Zhao Pingde; Xu Zhiqing; Tang Xiaowei

1986-01-01

The characteristics of multiwire proportional chamber and multistage avalanche chamber filled with argon and photoionization gas (C 2 H 5 ) 3 N were measured. The spatial resolution curves and output pulse height spectra were measured as well. Low concentration (C 2 H 5 ) 3 N can play an effective part in quenching. At very low concentration, the phenomena of avalanche transverse expansion was observed obviously

PEP quark search proportional chambers

Energy Technology Data Exchange (ETDEWEB)

Parker, S I; Harris, F; Karliner, I; Yount, D [Hawaii Univ., Honolulu (USA); Ely, R; Hamilton, R; Pun, T [California Univ., Berkeley (USA). Lawrence Berkeley Lab.; Guryn, W; Miller, D; Fries, R [Northwestern Univ., Evanston, IL (USA)

1981-04-01

Proportional chambers are used in the PEP Free Quark Search to identify and remove possible background sources such as particles traversing the edges of counters, to permit geometric corrections to the dE/dx and TOF information from the scintillator and Cerenkov counters, and to look for possible high cross section quarks. The present beam pipe has a thickness of 0.007 interaction lengths (lambdasub(i)) and is followed in both arms each with 45/sup 0/ <= theta <= 135/sup 0/, ..delta..phi=90/sup 0/ by 5 proportional chambers, each 0.0008 lambdasub(i) thick with 32 channels of pulse height readout, and by 3 thin scintillator planes, each 0.003 lambdasub(i) thick. Following this thin front end, each arm of the detector has 8 layers of scintillator (one with scintillating light pipes) interspersed with 4 proportional chambers and a layer of lucite Cerenkov counters. Both the calculated ion statistics and measurements using He-CH/sub 4/ gas in a test chamber indicate that the chamber efficiencies should be >98% for q=1/3. The Landau spread measured in the test was equal to that observed for normal q=1 traversals. One scintillator plane and thin chamber in each arm will have an extra set of ADC's with a wide gate bracketing the normal one so timing errors and tails of earlier pulses should not produce fake quarks.

Argus target chamber

International Nuclear Information System (INIS)

Rienecker, F. Jr.; Glaros, S.S.; Kobierecki, M.

1975-01-01

A target chamber for application in the laser fusion program must satisfy some very basic requirements. (1) Provide a vacuum on the order of 10 -6 torr. (2) Support a microscopically small target in a fixed point in space and verify its location within 5 micrometers. (3) Contain an adjustable beam focusing system capable of delivering a number of laser beams onto the target simultaneously, both in time and space. (4) Provide access for diagnostics to evaluate the results of target irradiation. (5) Have flexibility to allow changes in targets, focusing optics and number of beams. The ARGUS laser which is now under construction at LLL will have a target chamber which meets these requirements in a simple economic manner. The chamber and auxiliary equipment are described, with reference to two double beam focusing systems; namely, lenses and ellipsoidal mirrors. Provision is made for future operation with four beams, using ellipsoidal mirrors for two-sided illumination and lens systems for tetragonal and tetrahedral irradiation

Cylindrical ionization chamber with compressed krypton

International Nuclear Information System (INIS)

Kuz'minov, V.V.; Novikov, V.M.; Pomanskii, A.A.; Pritychenko, B.V.; Viyar, J.; Garcia, E.; Morales, A.; Morales, J.; Nunes-Lagos, R.; Puimedon, J.; Saens, K.; Salinas, A.; Sarsa, M.

1993-01-01

A cylindrical ionization chamber with a grid is used to search for double positron decay and atomic electron conversion to a positron in 78 Kr. Krypton is the working gas material of the chamber. The spectrometric characteristics of the chamber filled with krypton and xenon are presented. The energy resolution is 2.1% for an energy of 1.84 MeV (the source of γ-quanta is 88 Y) when the chamber is filled with a mixture of Kr+0.2% H 2 under a pressure of 25 atm

Advances on fission chamber modelling

International Nuclear Information System (INIS)

Filliatre, Philippe; Jammes, Christian; Geslot, Benoit; Veenhof, Rob

2013-06-01

In-vessel, online neutron flux measurements are routinely performed in mock-up and material testing reactors by fission chambers. Those measurements have a wide range of applications, including characterization of experimental conditions, reactor monitoring and safety. Depending on the application, detectors may experience a wide range of constraints, of several magnitudes, in term of neutron flux, gamma-ray flux, temperature. Hence, designing a specific fission chamber and measuring chain for a given application is a demanding task. It can be achieved by a combination of experimental feedback and simulating tools, the latter being based on a comprehensive understanding of the underlying physics. A computation route that simulates fission chambers, named CHESTER, is presented. The retrieved quantities of interest are the neutron-induced charge spectrum, the electronic and ionic pulses, the mean current and variance, the power spectrum. It relies on the GARFIELD suite, originally developed for drift chambers, and makes use of the MAGBOLTZ code to assess the drift parameters of electrons within the filling gas, and the SRIM code to evaluate the stopping range of fission products. The effect of the gamma flux is also estimated. Computations made with several fission chambers exemplify the possibilities of the route. A good qualitative agreement is obtained when comparing the results with the experimental data available to date. In a near future, a comprehensive experimental programme will be undertaken to qualify the route using the known neutron sources, mock-up reactors and wide choice of fission chambers, with a stress on the predictiveness of the Campbelling mode. Depending on the results, a refinement of the modelling and an effort on the accuracy of input data are also to be considered. CHESTER will then make it possible to predict the overall sensitivity of a chamber, and to optimize the design for a given application. Another benefit will be to increase the

An electrodeless drift chamber

International Nuclear Information System (INIS)

Allison, J.; Barlow, R.J.; Bowdery, C.K.; Duerdoth, I.; Rowe, P.G.

1982-01-01

We describe a chamber in which the drift field is controlled by the deposition of electrostatic charge on an insulating surface. The chamber operates with good efficiency and precision for observed drift distances of up to 45 cm, promises to be extremely robust and adaptable and offers a very cheap way of making particle detectors. (orig.)

DELPHI time projection chamber

CERN Multimedia

1989-01-01

The time projection chamber is inserted inside the central detector of the DELPHI experiment. Gas is ionised in the chamber as a charged particle passes through, producing an electric signal from which the path of the particle can be found. DELPHI, which ran from 1989 to 2000 on the LEP accelerator, was primarily concerned with particle identification.

Short rotation willow coppice for renewable energy and improved environment. Proceedings of a joint Swedish - Estonian seminar on energy forestry and vegetation filters

International Nuclear Information System (INIS)

Perttu, K.; Koppel, A.

1996-01-01

The overall aim of the present seminar was to present and discuss results from the joint Swedish - Estonian energy forestry research activities during the period of 1993-1995 and to publish the papers in a technical report. The results is a publication, presenting interesting methods and results, and is meant partly to serve as the final report of the joint efforts during the period mentioned, partly to be used for future planning of new projects and for application of funding for a continued cooperation. Separate abstracts have been prepared for all of the 17 papers in the report

Chamber propagation physics for heavy ion fusion

International Nuclear Information System (INIS)

Callahan, D.A.

1996-01-01

Chamber transport is a key area of study for heavy ion fusion. Final focus and chamber transport are high leverage areas providing opportunities to decrease significantly the cost of electricity from a heavy ion fusion power plant. Chamber transport in two basic regimes is under consideration. In the low chamber density regime (below about 0.003 Torr), ballistic or nearly ballistic transport is used. Partial beam neutralization has been studied to offset the effects of beam stripping. In the high chamber density regime (above about 0.1 Torr), two transport modes (pinched transport and channel transport) are under investigation. Both involve focusing the beam outside the chamber and then transporting it at small radius (about 2 mm). Both high chamber density modes relax the constraints on the beam quality needed from the accelerator which will reduce the driver cost and the cost of electricity. (orig.)

How to build a cloud chamber?

International Nuclear Information System (INIS)

Mariaud, C.

2012-01-01

The cloud chamber had its heyday in the first half of last century and allowed the discovery of new particles such as the anti-electron, the muon and the neutral and the charged kaon. The bubble chamber replaced it in the mid fifties. This article recalls the principle of the cloud chamber and shows, in a detailed way, how to proceed to build one with on-the-shelf materials. This design is based on the use of isopropanol whose liquefaction through the form of droplets materializes the track of the particle and on the use of combined Peltier cells (instead of CO 2 snow) to cool the chamber. This cloud chamber has been successfully used in schools to observe particles mainly electrons, alphas and muons generated by cosmic rays. (A.C.)

A mathematical model of aerosol holding chambers

DEFF Research Database (Denmark)

Zak, M; Madsen, J; Berg, E

1999-01-01

A mathematical model of aerosol delivery from holding chambers (spacers) was developed incorporating tidal volume (VT), chamber volume (Vch), apparatus dead space (VD), effect of valve insufficiency and other leaks, loss of aerosol by immediate impact on the chamber wall, and fallout of aerosol...... in the chamber with time. Four different spacers were connected via filters to a mechanical lung model, and aerosol delivery during "breathing" was determined from drug recovery from the filters. The formula correctly predicted the delivery of budesonide aerosol from the AeroChamber (Trudell Medical, London...

Quality control of ATLAS muon chambers

CERN Document Server

Fabich, Adrian

ATLAS is a general-purpose experiment for the future Large Hadron Collider (LHC) at CERN. Its Muon Spectrometer will require ∼ 5500m2 of precision tracking chambers to measure the muon tracks along a spectrometer arm of 5m to 15m length, embedded in a magnetic field of ∼ 0.5T. The precision tracking devices in the Muon System will be high pressure drift tubes (MDTs). Approximately 370,000 MDTs will be assembled into ∼ 1200 drift chambers. The performance of the MDT chambers is very much dependent on the mechanical quality of the chambers. The uniformity and stability of the performance can only be assured providing very high quality control during production. Gas tightness, high-voltage behaviour and dark currents are global parameters which are common to gas detectors. For all chambers, they will be tested immediately after the chamber assembly at every production site. Functional tests, for example radioactive source scans and cosmic-ray runs, will be performed in order to establish detailed performan...

Hyperbaric and hypobaric chamber fires: a 73-year analysis.

Science.gov (United States)

Sheffield, P J; Desautels, D A

1997-09-01

Fire can be catastrophic in the confined space of a hyperbaric chamber. From 1923 to 1996, 77 human fatalities occurred in 35 hyperbaric chamber fires, three human fatalities in a pressurized Apollo Command Module, and two human fatalities in three hypobaric chamber fires reported in Asia, Europe, and North America. Two fires occurred in diving bells, eight occurred in recompression (or decompression) chambers, and 25 occurred in clinical hyperbaric chambers. No fire fatalities were reported in the clinical hyperbaric chambers of North America. Chamber fires before 1980 were principally caused by electrical ignition. Since 1980, chamber fires have been primarily caused by prohibited sources of ignition that an occupant carried inside the chamber. Each fatal chamber fire has occurred in an enriched oxygen atmosphere (> 28% oxygen) and in the presence of abundant burnable material. Chambers pressurized with air (Hyperbaric Medical Society's Chamber Experience and Mishap Database. This epidemiologic review focuses on information learned from critical analyses of chamber fires and how it can be applied to safe operation of hypobaric and hyperbaric chambers.

HVAC&R Equipment Environmental Chambers

Data.gov (United States)

Federal Laboratory Consortium — Description:Large "Truck" ChamberThe large "truck" chamber provides controlled air conditions from -7 °C (20 °F) to 65 °C (150 °F).Air-Conditioner and Heat Pump Test...

Micro plate fission chamber development

International Nuclear Information System (INIS)

Wang Mei; Wen Zhongwei; Lin Jufang; Jiang Li; Liu Rong; Wang Dalun

2014-01-01

To conduct the measurement of neutron flux and the fission rate distribution at several position in assemblies, the micro plate fission chamber was designed and fabricated. Since the requirement of smaller volume and less structure material was taken into consideration, it is convinient, commercial and practical to use fission chamber to measure neutron flux in specific condition. In this paper, the structure of fission chamber and process of fabrication were introduced and performance test result was presented. The detection efficiency is 91.7%. (authors)

Ionization chamber for smoke detector and the like

International Nuclear Information System (INIS)

Rork, G.D.; Thorp, E.J.; Zegarski, R.J.

1985-01-01

This invention relates to detectors of the ionization type for detecting airborne particulate matter and, in particular, to the construction of an ionization chamber for such a detector. This invention may be used for detecting a variety of materials, such as dust, fog and the like, but is particularly useful for detecting combustion products such as smoke. The smoke detector ionization chamber has two electrodes connected to a source of electric power; means defining access openings for enabling air flow into and out of the chamber; and means for causing ionization within the chamber. It has control structure means within the chamber in the path of the airflow cooperating with the electrodes to establish within the chamber an electric field having a higher intensity close to the access openings and a lower intensity in the remainder of the chamber without significantly impairing the flow of neutral particles into the chamber. The control structure reduces airflow velocity within the chamber without adversely affecting the access of airborne particles to the chamber

Liquid Wall Chambers

Energy Technology Data Exchange (ETDEWEB)

Meier, W R

2011-02-24

The key feature of liquid wall chambers is the use of a renewable liquid layer to protect chamber structures from target emissions. Two primary options have been proposed and studied: wetted wall chambers and thick liquid wall (TLW) chambers. With wetted wall designs, a thin layer of liquid shields the structural first wall from short ranged target emissions (x-rays, ions and debris) but not neutrons. Various schemes have been proposed to establish and renew the liquid layer between shots including flow-guiding porous fabrics (e.g., Osiris, HIBALL), porous rigid structures (Prometheus) and thin film flows (KOYO). The thin liquid layer can be the tritium breeding material (e.g., flibe, PbLi, or Li) or another liquid metal such as Pb. TLWs use liquid jets injected by stationary or oscillating nozzles to form a neutronically thick layer (typically with an effective thickness of {approx}50 cm) of liquid between the target and first structural wall. In addition to absorbing short ranged emissions, the thick liquid layer degrades the neutron flux and energy reaching the first wall, typically by {approx}10 x x, so that steel walls can survive for the life of the plant ({approx}30-60 yrs). The thick liquid serves as the primary coolant and tritium breeding material (most recent designs use flibe, but the earliest concepts used Li). In essence, the TLW places the fusion blanket inside the first wall instead of behind the first wall.

Five-class height-weight mean and SD system applying Estonian reference values of height-weight mean and SD for systematization of seventeen-year-old conscripts' anthropometric data.

Science.gov (United States)

Lintsi, Mart; Kaarma, Helje; Aunapuu, Marina; Arend, Andres

2007-03-01

A study of 739 conscripts aged 17 years from the town of Tartu and from the Tartu county was performed. Height, weight, 33 anthropometric measurements and 12 skinfolds were measured. The data were classified into five height-weight mean and SD-classes applying the Estonian reference values for this age and sex (Grünberg et al. 1998). There were 3 classes with conformity between height and weight class: 1--small (small height and small weight), 2--medium (medium height and medium weight), 3--large (large height and large weight), 4--weight class dominating (pyknomorphic) and 5--height class dominating (leptomorphic). It was found, that in classes 1, 2 and 3 the height and weight increase was in accordance with the increase in all heights, breadths and depths, circumferences, skinfolds, body fat, muscle and bone mass. In class 4 circumferences, skinfolds, body fat and muscle mass were bigger. In class 5 all heights and the relative bone mass were bigger. The present investigation confirms the assumption that the five height-weight mean and SD five-class system applying the Estonian reference values for classifying the anthropometric variables is suitable for seventeen-year-old conscripts. As well the border values of 5%, 50% and 95% for every anthropometrical variable in the five-classes were calculated, which may be helpful for practical classifying.

High resolution drift chambers

International Nuclear Information System (INIS)

Va'vra, J.

1985-07-01

High precision drift chambers capable of achieving less than or equal to 50 μm resolutions are discussed. In particular, we compare so called cool and hot gases, various charge collection geometries, several timing techniques and we also discuss some systematic problems. We also present what we would consider an ''ultimate'' design of the vertex chamber. 50 refs., 36 figs., 6 tabs

The Mark II Vertex Drift Chamber

International Nuclear Information System (INIS)

Alexander, J.P.; Baggs, R.; Fujino, D.

1989-03-01

We have completed constructing and begun operating the Mark II Drift Chamber Vertex Detector. The chamber, based on a modified jet cell design, achieves 30 μm spatial resolution and 2 gas mixtures. Special emphasis has been placed on controlling systematic errors including the use of novel construction techniques which permit accurate wire placement. Chamber performance has been studied with cosmic ray tracks collected with the chamber located both inside and outside the Mark II. Results on spatial resolution, average pulse shape, and some properties of CO 2 mixtures are presented. 10 refs., 12 figs., 1 tab

Bicone vacuum chamber for ISR intersection

CERN Multimedia

1975-01-01

This is one of the bicone chambers made of titanium for experiment R 702. The central corrugated part had a very thin titanium wall (0.28 mm). The first of these chambers collapsed in its central part when baked at 300 C (August 1975). After an intensive effort to develop better quality and reproducible welds for this special material, the ISR workshop was able to build two new chambers of this type. One of them was installed at I 7 for R 702 in 1976 and worked perfectly. It was at that time the most "transparent" intersection vacuum chamber. See also 7609219, 7609221.

Growing and analyzing biofilms in flow chambers

DEFF Research Database (Denmark)

Tolker-Nielsen, Tim; Sternberg, Claus

2011-01-01

This unit describes the setup of flow chamber systems for the study of microbial biofilms, and methods for the analysis of structural biofilm formation. Use of flow chambers allows direct microscopic investigation of biofilm formation. The biofilms in flow chambers develop under hydrodynamic......, and disassembly and cleaning of the system. In addition, embedding and fluorescent in situ hybridization of flow chamber-grown biofilms are addressed....

Microstrip gas chamber on thin-film Pestov glass and micro gap chamber

International Nuclear Information System (INIS)

Gong, W.G.; Harris, J.W.; Wieman, H.

1994-07-01

The authors report developments of the Microstrip Gas Chamber on thin-film Pestov glass and the Micro Gap Chamber. By coating a thin-layer of low-resistive, electronically-conductive glass on various substrates (including quartz and ceramics), they built MSGCs of high gain stability and low leakage current. They were tested in Ar-CH 4 (10%) and He-C 2 H 6 (50%) gas mixtures. Energy resolutions of 17-20% were measured for 6keV x-rays. This design can make the choice of substrate less important, save the cost of ion-implantation, and use less glass material. Micro Gap Chamber was successfully tested in He-C 2 H 6 (50%) and Ar-C 2 H 6 (50%) gas mixtures. Energy resolutions of about 20% were obtained. Both detectors are expected to have high rate capability

Comparison among different CT ionization chambers

International Nuclear Information System (INIS)

Castro, Maysa C. de; Xavier, Marcos; Caldas, Linda V.E.

2015-01-01

The dosimetry in computed tomography (CT) is carried out by the use of a pencil type ionization-chamber, because it has a uniform response at all angles relative to the incident beam of radiation, which is essential for CT equipment since the X-ray tube executes a circular movement around the table during irradiation. The commercial ionization chamber used to perform quality control procedures of this kind of equipment has a length of the sensitive volume of 10 cm. In the Calibration Laboratory of Instruments (LCI) of the IPEN there were already developed some prototypes with small differences in construction, when compared to commercially available ionization chambers. They have been used in previous studies and showed results within internationally acceptable limits. The ionization chambers tested in this study present the sensitive volume lengths of 1 cm, 3 cm and 10 cm. The objective of this study was to present results on the stability test of the three homemade ionization chambers and a commercial chamber, as well to obtain the calibration coefficients for each of them in CT standard X radiation beams. The obtained results for both characterization tests are within the recommended limits, except for the homemade ionization chambers with sensitive volume lengths of 3 cm and 1 cm in the case of the stability test. (author)

Multi-stage low-pressure avalanche chamber

International Nuclear Information System (INIS)

Zanevskij, Yu.V.; Peshekhonov, V.D.; Smykov, L.P.

1985-01-01

A multi-stage avalanche-chamber filled with isobutane operating at the pressure of 6 torr is described. The chamber comprises an amplifying gap, drift gap and multiwire proportional chamber with interelectrode gaps equal to 4 mm. The anode plane of the proportional chamber is winded of wire 2 μm in diameter with 2 mm pitch. The cathode are winded orthogonally to anode wires of wire 50 μm in diameter with 1 mm pitch. Drift and preamplifier gaps are formed by grid electrodes made of wire 50 μm in diameter with dimension of the cell equal to 1x1 mm. Width of the drift gap is 5 mm, width of the preamplification gap is 3 or 9 mm. Coordinate data are removed from the cathodes of the proportional chamber by means of delay lines. Sensitive square of the chamber equals 240x180 mm. Gas gain coefficient is 3x10 6 at its square nonuniformity equal to approximately 3%. Spatial resolution by both coordinates equals 170 μm; spatial resolution for isotropic α-emitters located close to the preamplifier gap is equal to 500 μm

Monitored Drift Chambers in the ATLAS Detector

CERN Multimedia

Herten, G

Monitored Drift Chambers (MDT) are used in the ATLAS Detector to measure the momentum of high energy muons. They consist of drift tubes, which are filled with an Ar-CO2 gas mixture at 3 bar gas pressure. About 1200 drift chambers are required for ATLAS. They are up to 6 m long. Nevertheless the position of every wire needs to be known with a precision of 20 µm within a chamber. In addition, optical alignment sensors are required to measure the relative position of adjacent chambers with a precision of 30µm. This gigantic task seems impossible at first instance. Indeed it took many years of R&D to invent the right tools and methods before the first chamber could be built according to specifications. Today, at the time when 50% of the chambers have been produced, we are confident that the goal for ATLAS can be reached. The mechanical precision of the chambers could be verified with the x-ray tomograph at CERN. This ingenious device, developed for the MDT system, is able to measure the wire position insid...

Industrial development of neutron detectors, fission chambers, self powered detectors, ionization chambers

International Nuclear Information System (INIS)

Constans, H.; Coville, P.; Guerre, J.

1975-01-01

Reactor control requires the determination of neutron flux at all times. The needed characteristics lead to use of several types of detectors: boron lined counters, boron lined ionization chambers, fission ionization chambers and self powered detectors. The principle of the reaction involved the fabrication requirements, the different modes of utilization and the characteristics obtained are examined for each detector. The problem of electric connections in the active area has been solved by developing ''integrated cables'' [fr

The little holographic bubble chambers

International Nuclear Information System (INIS)

Herve, A.

1983-01-01

The lifetime study of the charmed particles has readvanced the idea to use holography for the little fast-cycle bubble chambers. A pilot experiment has been realised in 1982 with a little bubble chamber filled up with freon-115. 40000 holograms have been recorded [fr

Pelletron general purpose scattering chamber

International Nuclear Information System (INIS)

Chatterjee, A.; Kailas, S.; Kerekette, S.S.; Navin, A.; Kumar, Suresh

1993-01-01

A medium sized stainless steel scattering chamber has been constructed for nuclear scattering and reaction experiments at the 14UD pelletron accelerator facility. It has been so designed that several types of detectors, varying from small sized silicon surface barrier detectors to medium sized gas detectors and NaI detectors can be conveniently positioned inside the chamber for detection of charged particles. The chamber has been planned to perform the following types of experiments : angular distributions of elastically scattered particles, fission fragments and other charged particles, angular correlations for charged particles e.g. protons, alphas and fission fragments. (author). 2 figs

Radon diffusion chamber

International Nuclear Information System (INIS)

Pretzsch, G.; Boerner, E.; Lehmann, R.; Sarenio, O.

1986-01-01

The invention relates to the detection of radioactive gases emitting alpha particles like radon, thoron and their alpha-decaying daughters by means of a diffusion chamber with a passive detector, preferably with a solid state track detector. In the chamber above and towards the detector there is a single metallized electret with negative polarity. The distance between electret and detector corresponds to the range of the alpha particles of radon daughters in air at the most. The electret collects the positively charged daughters and functions as surface source. The electret increases the sensitivity by the factor 4

Multispecimen dual-beam irradiation damage chamber

International Nuclear Information System (INIS)

Packan, N.H.; Buhl, R.A.

1980-06-01

An irradiation damage chamber that can be used to rapidly simulate fast neutron damage in fission or fusion materials has been designed and constructed. The chamber operates in conjunction with dual Van de Graaff accelerators at ORNL to simulate a wide range of irradiation conditions, including pulsed irradiation. Up to six experiments, each with up to nine 3-mm disk specimens, can be loaded into the ultrahigh vacuum chamber. Specimen holders are heated with individual electron guns, and the temperature of each specimen can be monitored during bombardment by an infrared pyrometer. Three different dose levels may be obtained during any single bombardment, and the heavy-ion flux on each of the nine specimens can be measured independently with only a brief interruption of the beam. The chamber has been in service for nearly three years, during which time approximately 250 bombardments have been successfully carried out. An appendix contains detailed procedures for operating the chamber

Bi-cone vacuum chamber in the ISR

CERN Multimedia

CERN PhotoLab

1976-01-01

The "bi-cone" vacuum chamber in ISR intersection I-7, for experiment R702. Made from 0.28 mm thick titanium, it was at its time the most transparent chamber ever built. Ian Wilson is standing next to the chamber. See also 7609219.

Device for gamma-chamber transducer alignment

International Nuclear Information System (INIS)

Mirkhodzhaev, A.Kh.; Kuznetsov, N.K.; Ostryj, Yu.E.

1987-01-01

The device consists of the upper part of the gamma chamber pilar to which a rod is rigidly fastened with a disk of acrylic plastic moving freely on the opposite end. The disk is placed coaxially and is equal to the gamma chamber detector crystal. The device makes it possible to use ordinary medical couches covered with a porolone mattress when the gamma chamber detector is placed below

Bubble chamber: Omega production and decay

CERN Document Server

1973-01-01

This image is taken from one of CERN's bubble chambers and shows the decay of a positive kaon in flight. The decay products of this kaon can be seen spiraling in the magnetic field of the chamber. The invention of bubble chambers in 1952 revolutionized the field of particle physics, allowing real tracks left by particles to be seen and photographed by expanding liquid that has been heated to boiling point.

Venturi vacuum systems for hypobaric chamber operations.

Science.gov (United States)

Robinson, R; Swaby, G; Sutton, T; Fife, C; Powell, M; Butler, B D

1997-11-01

Physiological studies of the effects of high altitude on man often require the use of a hypobaric chamber to simulate the reduced ambient pressures. Typical "altitude" chambers in use today require complex mechanical vacuum systems to evacuate the chamber air, either directly or via reservoir system. Use of these pumps adds to the cost of both chamber procurement and maintenance, and service of these pumps requires trained support personnel and regular upkeep. In this report we describe use of venturi vacuum pumps to perform the function of mechanical vacuum pumps for human and experimental altitude chamber operations. Advantages of the venturi pumps include their relatively low procurement cost, small size and light weight, ease of installation and plumbing, lack of moving parts, and independence from electrical power sources, fossil fuels and lubricants. Conversion of three hyperbaric chambers to combined hyper/hypobaric use is described.

Apparatus for reading and recharging condenser ionization chambers

International Nuclear Information System (INIS)

McCall, R.C.

1977-01-01

A metering circuit for a condenser ionization chamber is disclosed for simultaneously recharging the ionization chamber and reading out the amount of charge required to recharge the chamber. During the recharging process, the amount of charge necessary to recharge the ionization chamber capacitor is placed on an integrating capacitor in the metering apparatus. The resultant voltage across the integrating capacitor is a measure of the radiation to which the ionization chamber was exposed. 9 claims, 1 figure

Liquid-filled ionization chamber temperature dependence

Energy Technology Data Exchange (ETDEWEB)

Franco, L. [Dpto. de Fisica de Particulas, Facultade de Fisica, Universidade de Santiago, Campus Sur S/N, 15782 Santiago de Compostela (Spain)]. E-mail: luciaff@usc.es; Gomez, F. [Dpto. de Fisica de Particulas, Facultade de Fisica, Universidade de Santiago, Campus Sur S/N, 15782 Santiago de Compostela (Spain); Iglesias, A. [Dpto. de Fisica de Particulas, Facultade de Fisica, Universidade de Santiago, Campus Sur S/N, 15782 Santiago de Compostela (Spain); Pardo, J. [Dpto. de Fisica de Particulas, Facultade de Fisica, Universidade de Santiago, Campus Sur S/N, 15782 Santiago de Compostela (Spain); Pazos, A. [Dpto. de Fisica de Particulas, Facultade de Fisica, Universidade de Santiago, Campus Sur S/N, 15782 Santiago de Compostela (Spain); Pena, J. [Dpto. de Fisica de Particulas, Facultade de Fisica, Universidade de Santiago, Campus Sur S/N, 15782 Santiago de Compostela (Spain); Zapata, M. [Dpto. de Fisica de Particulas, Facultade de Fisica, Universidade de Santiago, Campus Sur S/N, 15782 Santiago de Compostela (Spain)

2006-05-10

Temperature and pressure corrections of the read-out signal of ionization chambers have a crucial importance in order to perform high-precision absolute dose measurements. In the present work the temperature and pressure dependences of a sealed liquid isooctane filled ionization chamber (previously developed by the authors) for radiotherapy applications have been studied. We have analyzed the thermal response of the liquid ionization chamber in a {approx}20 deg. C interval around room temperature. The temperature dependence of the signal can be considered linear, with a slope that depends on the chamber collection electric field. For example, a relative signal slope of 0.27x10{sup -2}K{sup -1} for an operation electric field of 1.67x10{sup 6}Vm{sup -1} has been measured in our detector. On the other hand, ambient pressure dependence has been found negligible, as expected for liquid-filled chambers. The thermal dependence of the liquid ionization chamber signal can be parametrized within the Onsager theory on initial recombination. Considering that changes with temperature of the detector response are due to variations in the free ion yield, a parametrization of this dependence has been obtained. There is a good agreement between the experimental data and the theoretical model from the Onsager framework.

Bubble chamber: antiproton annihilation

CERN Multimedia

1971-01-01

These images show real particle tracks from the annihilation of an antiproton in the 80 cm Saclay liquid hydrogen bubble chamber. A negative kaon and a neutral kaon are produced in this process, as well as a positive pion. The invention of bubble chambers in 1952 revolutionized the field of particle physics, allowing real tracks left by particles to be seen and photographed by expanding liquid that had been heated to boiling point.

Temperature Studies for ATLAS MDT BOS Chambers

CERN Document Server

Engl, A.; Biebel, O.; Mameghani, R.; Merkl, D.; Rauscher, F.; Schaile, D.; Ströhmer, R.

Data sets with high statistics taken at the cosmic ray facility, equipped with 3 ATLAS BOS MDT chambers, in Garching (Munich) have been used to study temperature and pressure effects on gas gain and drifttime. The deformation of a thermally expanded chamber was reconstructed using the internal RasNik alignment monitoring system and the tracks from cosmic data. For these studies a heating system was designed to increase the temperature of the middle chamber by up to 20 Kelvins over room temperature. For comparison the temperature effects on gas properties have been simulated with Garfield. The maximum drifttime decreased under temperature raise by -2.21 +- 0.08 ns/K, in agreement with the results of pressure variations and the Garfield simulation. The increased temperatures led to a linear increase of the gas gain of about 2.1% 1/K. The chamber deformation has been analyzed with the help of reconstructed tracks. By the comparison of the tracks through the reference chambers with these through the test chamber ...

Brookhaven National Laboratory's multiparticle spectrometer drift chamber system

International Nuclear Information System (INIS)

Etkin, A.; Kramer, M.A.

1979-01-01

A system of drift chambers is being built to replace the present spark chambers in the Brookhaven National Laboratory's Multiparticle Spectrometer. This system will handle a beam of approx. 3 million particles per second and have a resolution of 200 μm. A summary of the status of the chambers and the custom integrated circuits is presented. The data acquisition system is described. Prototype chambers have been built and tested with results that are consistent with the expected chamber properties

LEP vacuum chamber, cross-section

CERN Multimedia

CERN PhotoLab

1983-01-01

Cross-section of the final prototype for the LEP vacuum chamber. The elliptic main-opening is for the beam. The small channel to the left is for the cooling water, to carry away the heat deposited by the synchrotron radiation. The square channel to the right houses the Non-Evaporable Getter (NEG) pump. The chamber is made from extruded aluminium. Its outside is clad with lead, to stop the synchrotron radiation emitted by the beam. For good adherence between Pb and Al, the Al chamber was coated with a thin layer of Ni. Ni being slightly magnetic, some resulting problems had to be overcome. See also 8301153.

1988. aasta suveräänsusdeklaratsioon: silmakirjalikkuse tsiviliseeriv mõju / The Estonian Declaration of Sovereignty: An example of the civilising force of hypocrisy

Directory of Open Access Journals (Sweden)

Hent-Raul Kalmo

2011-01-01

Full Text Available Sovereignty has been characterised as a form of “organised hypocrisy”, a system governed by a set of rules that are generally recognised as binding and yet continually infringed by the most powerful actors. This idea can be extended to analyse the role of sovereignty within the Soviet Union. The latter was also nominally governed by a constitution which endowed the Union Republics with the right of secession, but there was no realistic possibility of exercising this right. One should not rush to conclude, however, that the letter of the Soviet Constitution of 1977 was entirely without relevance. As Jon Elster has argued, hypocrisy can be a “civilising force” when the need to appear impartial and retain public credibility forces actors to choose a strategy they would not have chosen otherwise. A good example of this kind of argumentative constraint is offered by the dilemma faced by the Soviet leadership after the mid-1980s, as it became reluctant to use military force to suppress independence movements within the Baltic States while, at the same time, promising to give more weight to the Soviet Constitution and respect the “sovereignty” of the Union Republics. In this setting, the ambiguity of the word “sovereignty” could be used by a whole gamut of political movements in order to further their agenda, from local communists eager to expand their autonomy within the Soviet system to those making an explicit bid for the restoration of independence. Significant legal and political changes could be justified as mere conclusions from the constitutionally recognised status of the Union Republics — a strategy which was all the more effective as Moscow struggled to formulate an alternative line of constitutional interpretation that could be used to counter the Baltic claims. This exchange of opinions escalated into a constitutional conflict in November 1988 when the Estonian Supreme Soviet responded to proposed amendments to the Soviet

Note: Small anaerobic chamber for optical spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Chauvet, Adrien A. P., E-mail: adrien.chauvet@gmail.com; Chergui, Majed [Ecole Polytechnique Fédérale de Lausanne (EPFL), Laboratoire de Spectroscopie Ultrarapide, ISIC, Faculté des Sciences de Base, Station 6, 1015 Lausanne (Switzerland); Agarwal, Rachna; Cramer, William A. [Department of Biological Sciences, Purdue University, West Lafayette, Indiana 47907 (United States)

2015-10-15

The study of oxygen-sensitive biological samples requires an effective control of the atmosphere in which they are housed. In this aim however, no commercial anaerobic chamber is adequate to solely enclose the sample and small enough to fit in a compact spectroscopic system with which analysis can be performed. Furthermore, spectroscopic analysis requires the probe beam to pass through the whole chamber, introducing a requirement for adequate windows. In response to these challenges, we present a 1 l anaerobic chamber that is suitable for broad-band spectroscopic analysis. This chamber has the advantage of (1) providing access, via a septum, to the sample and (2) allows the sample position to be adjusted while keeping the chamber fixed and hermetic during the experiment.

Structural Analysis of Extended Plasma Focus Chamber

International Nuclear Information System (INIS)

Mohd Azhar Ahmad; Abdul Halim Baijan; Siti Aiasah Hashim

2016-01-01

Accelerator Development Centre (ADC) of Nuclear Malaysia intends to upgrade the plasma focus device. It involves the extension part placed on top of the existing plasma focus vacuum chamber. This extended vacuum chamber purposely to give an extra space in conducting experiments on the existing plasma focus chamber. The aim of upgrading the plasma focus device is to solve the limitation in research and analysis of sample due to its done in an open system that cause analysis of samples is limited and less optimal. This extended chamber was design in considering the ease of fabrication as well as durability of its structural. Thus, this paper discusses the structural analysis in term of pressure loading effect in extended chamber. (author)

Using micro-contexts to describe a writing process in Estonian as a second language across proficiency levels

Directory of Open Access Journals (Sweden)

Olga Pastuhhova

2015-04-01

Full Text Available This paper aims to describe the writing process of native Russian‑speaking students in Estonian as a second language. 34 participants were given the assignment of writing a text in the L2. The written texts were then rated as being at levels from A2 to C1 according to the Common European Framework of Reference for Languages (CEFR. The data were collected by computer keystroke logging and analysed based on the concept of a ‘micro-context’. Micro-contexts were analysed according to their frequency and duration and were compared across proficiency levels. The results show that writing in the L2 is not a smooth process. The longest transitions in micro-contexts reveal that the most cognitive effort is made between paragraphs and sentences and when deletions are involved. The growing number of consecutive deletions demonstrates that even with developing proficiency, the linear production text is subject to constant revision, correction and modification.

Experiences of a long-term randomized controlled prevention trial in a maiden environment: Estonian Postmenopausal Hormone Therapy trial

Directory of Open Access Journals (Sweden)

Rahu Mati

2008-08-01

Full Text Available Abstract Background Preventive drugs require long-term trials to show their effectiveness or harms and often a lot of changes occur during post-marketing studies. The purpose of this article is to describe the research process in a long-term randomized controlled trial and discuss the impact and consequences of changes in the research environment. Methods The Estonian Postmenopausal Hormone Therapy trial (EPHT, originally planned to continue for five years, was planned in co-operation with the Women's International Study of Long-Duration Oestrogen after Menopause (WISDOM in the UK. In addition to health outcomes, EPHT was specifically designed to study the impact of postmenopausal hormone therapy (HT on health services utilization. Results After EPHT recruited in 1999–2001 the Women's Health Initiative (WHI in the USA decided to stop the estrogen-progestin trial after a mean of 5.2 years in July 2002 because of increased risk of breast cancer and later in 2004 the estrogen-only trial because HT increased the risk of stroke, decreased the risk of hip fracture, and did not affect coronary heart disease incidence. WISDOM was halted in autumn 2002. These decisions had a major influence on EPHT. Conclusion Changes in Estonian society challenged EPHT to find a balance between the needs of achieving responses to the trial aims with a limited budget and simultaneously maintaining the safety of trial participants. Flexibility was the main key for success. Rapid changes are not limited only to transiting societies but are true also in developed countries and the risk must be included in planning all long-term trials. The role of ethical and data monitoring committees in situations with emerging new data from other studies needs specification. Longer funding for preventive trials and more flexibility in budgeting are mandatory. Who should prove the effectiveness of an (old drug for a new preventive indication? In preventive drug trials companies may

Prokofiev: Symphony No. 6 in E flat, Op. 111 / Jonathan Swain

Index Scriptorium Estoniae

Swain, Jonathan

1994-01-01

Uuest heliplaadist "Prokofiev: Symphony No. 6 in E flat, Op. 111; Stravinsky:Petrushka (1911 version). Leningrad Philharmonic Orchestra / Evgeny Mravinsky; Prokofiev - selected comparison: SNO, Järvi (7/85)(CHAN) CHAN 8359

Stravinsky: Symphony in E flat, Op. 1. Firebird-Suite (1919 version / Jonathan Swain

Index Scriptorium Estoniae

Swain, Jonathan

1994-01-01

Uuest heliplaadist "Stravinsky: Symphony in E flat, Op. 1. Firebird-Suite (1919 version). Royal Philharmonic Orchestra / Dalia Atlas; Symphony - comparative versions: SNO, Gibson. SRO, Järvi (2/94)(CHAN) CHAN 9236

Plasma chemistry in wire chambers

International Nuclear Information System (INIS)

Wise, J.

1990-05-01

The phenomenology of wire chamber aging is discussed and fundamentals of proportional counters are presented. Free-radical polymerization and plasma polymerization are discussed. The chemistry of wire aging is reviewed. Similarities between wire chamber plasma (>1 atm dc-discharge) and low-pressure rf-discharge plasmas, which have been more widely studied, are suggested. Construction and use of a system to allow study of the plasma reactions occurring in wire chambers is reported. A proportional tube irradiated by an 55 Fe source is used as a model wire chamber. Condensable species in the proportional tube effluent are concentrated in a cryotrap and analyzed by gas chromatography/mass spectrometry. Several different wire chamber gases (methane, argon/methane, ethane, argon/ethane, propane, argon/isobutane) are tested and their reaction products qualitatively identified. For all gases tested except those containing methane, use of hygroscopic filters to remove trace water and oxygen contaminants from the gas resulted in an increase in the average molecular weight of the products, consistent with results from low-pressure rf-discharge plasmas. It is suggested that because water and oxygen inhibit polymer growth in the gas phase that they may also reduce polymer deposition in proportional tubes and therefore retard wire aging processes. Mechanistic implications of the plasma reactions of hydrocarbons with oxygen are suggested. Unresolved issues in this work and proposals for further study are discussed

Wire chamber degradation at the Argonne ZGS

International Nuclear Information System (INIS)

Haberichter, W.; Spinka, H.

1986-01-01

Experience with multiwire proportional chambers at high rates at the Argonne Zero Gradient Synchrotron is described. A buildup of silicon on the sense wires was observed where the beam passed through the chamber. Analysis of the chamber gas indicated that the density of silicon was probably less than 10 ppM

Drift chamber vertex detectors for SLC/LEP

Energy Technology Data Exchange (ETDEWEB)

Hayes, K G

1988-03-01

Factors influencing the design of drift chamber vertex detectors for SLC and LEP are discussed including global strategy, chamber gas, cell design, and signal processing. The designs of the vertex chambers for the L3 and OPAL experiments at LEP and the Mark II experiment at the SLC are described.

Radon-daughter chamber instrumentation system reference manual

International Nuclear Information System (INIS)

Showalter, R.; Johnson, L.

1985-01-01

The radon-daughter chamber instrumentation system collects environmental data from the radon-daughter chamber. These data are then recorded on a Tandberg system tape cartridge and transmitted to the HP-1000 computer for processing. Generators which inject radon and condensation nuclei into the chamber are also included with the instrumentation system

Nuclear design considerations for Z-IFE chambers

Energy Technology Data Exchange (ETDEWEB)

Meier, W.R. [Lawrence Livermore National Laboratory, P.O. Box 808, L-641, Livermore, CA 94551 (United States)]. E-mail: meier5@llnl.gov; Schmitt, R.C. [Bettis Atomic Power Laboratory, Pittsburgh, PA 15203 (United States); Abbott, R.P. [Lawrence Livermore National Laboratory, P.O. Box 808, L-641, Livermore, CA 94551 (United States); Latkowski, J.F. [Lawrence Livermore National Laboratory, P.O. Box 808, L-641, Livermore, CA 94551 (United States); Reyes, S. [Lawrence Livermore National Laboratory, P.O. Box 808, L-641, Livermore, CA 94551 (United States)

2006-02-15

Z-pinch driven IFE (Z-IFE) requires the design of a repetitive target insertion system that allows coupling of the pulsed power to the target with adequate standoff, and a chamber that can withstand blast and radiation effects from large yield targets. The present strategy for Z-IFE is to use high yield targets ({approx}2-3 GJ/shot), low repetition rate per chamber ({approx}0.1 Hz), and 10 chambers per power plant. In this study, we propose an alternative power plant configuration that uses very high yield targets (20 GJ/shot) in a single chamber operating at 0.1 Hz. A thick-liquid-wall chamber is proposed to absorb the target emission (X-rays, debris and neutrons) and mitigate the blast effects on the chamber wall. The target is attached to the end of a conical shaped recyclable transmission line (RTL) made from a solid coolant (e.g., frozen flibe), or a material that is easily separable from the coolant (e.g., steel). The RTL/target assembly is inserted through a single opening at the top of the chamber for each shot. This study looks at the RTL material choice from a safety and environmental point of view. Materials were assessed according to waste disposal rating (WDR) and contact dose rate (CDR). Neutronics calculations, using the TART2002 Monte Carlo code from Lawrence Livermore National Laboratory (LLNL), were performed for the RTL and Z-IFE chamber, and key results reported here.

"Flat-Fish" Vacuum Chamber

CERN Multimedia

CERN PhotoLab

1978-01-01

The picture shows a "Flat-Fish" vacuum chamber being prepared in the ISR workshop for testing prior to installation in the Split Field Magnet (SFM) at intersection I4. The two shells of each part were hydroformed from 0.15 mm thick inconel 718 sheet (with end parts in inconel 600 for easier manual welding to the arms) and welded toghether with two strips which were attached by means of thin stainless steel sheets to the Split Field Magnet poles in order to take the vertical component of the atmospheric pressure force. This was the thinnest vacuum chamber ever made for the ISR. Inconel material was chosen for its high elastic modulus and strenght at chamber bake-out temperature. In this picture the thin sheets transferring the vertical component of the atmosferic pressure force are attached to a support frame for testing. See also 7712182, 7712179.

PWCs and drift chambers at ISABELLE

International Nuclear Information System (INIS)

Okuno, H.; Teramoto, Y.; Wheeler, C.D.

1978-01-01

Rate effects in proportional chambers and drift chambers are addressed first. The widely used high-gas-gain chambers would have impaired performance at ISABELLE data rates. Improvement can be expected with lower gas gain, and this possibility is investigated with respect to position and time resolution. Results on chamber lifetime are summarized; space-charge effects, gain saturation, and radiation hardness of electronics are considered. The resolution of drift chambers is discussed in some detail; time resolution, double pulse resolution, and momentum resolution and multiple scattering are included. The expected high multiplicity of tracks from a single event, the high event rates, and the requirement for low gas gain necessitate revision of the methods for measuring the second coordinate. Known methods of two-dimensional point localization are summarized according to spatial accuracy, electronics requirements, and multihit capability. Delay lines, charge division, and cathode strips are considered. Particle identification by means of measurement of the relativistic rise of energy loss by conventional and unconventional means was investigated. 32 references, 3 figures, 4 tables

Improved climatic chamber for desiccation simulation

Directory of Open Access Journals (Sweden)

Lozada Catalina

2016-01-01

Full Text Available The climatic chamber at the Universidad de Los Andes was improved for modeling desiccation in soil layers. This chamber allows the measurement of different environmental variables. In this research, evaporation tests were conducted in water imposing boundary conditions for drying, and then these tests were performed in a soil layer. The soil was prepared from a slurry state and was drying controlling the temperature, the infrared radiation, the wind velocity, and the relative humidity. In the first part of this paper, a description of the climatic chamber, operation ranges and theoretical work principles of the climatic chamber are presented. Then, the second part shows the results for desiccation in water and soil. The desiccation tests performed with the climatic chamber allow simulating all environmental conditions accurately during drying coupling the effect of all environmental variables. As a result, the evaporation rate increases with infrared radiation in soil and water. The rate at the beginning of the desiccation tests in clays is the same as in water. However, this evaporation rate decreases as the soil becomes desiccated.

Mixed field dosimetry with the twin chamber technique

International Nuclear Information System (INIS)

Burger, G.; Maier, E.

1974-04-01

For the separate dosimetry of the neutron- and gamma-component in a mixed beam it is principally possible to use two ionization chambers with different ratios of neutron- to gamma sensitivity. Several authors proposed for this purpose the use of a homogenious TE-chamber filled with the TE-gas and of a carbon-chamber filled with CO 2 -gas. This chamber combination is also commercially available in several countries. The chambers are normally equipped with a continuous gas-flow provision and with a waterproof-housing for the use within liquid phantoms. The application of such chambers for mixed field dosimetry in the intercomparison project of the ICRU at the RARAF-facility in Brookhaven (International Neutron Dosimetry Intercomparison - INDI) is described. (orig./HP) [de

Drift chamber tracking with neural networks

International Nuclear Information System (INIS)

Lindsey, C.S.; Denby, B.; Haggerty, H.

1992-10-01

We discuss drift chamber tracking with a commercial log VLSI neural network chip. Voltages proportional to the drift times in a 4-layer drift chamber were presented to the Intel ETANN chip. The network was trained to provide the intercept and slope of straight tracks traversing the chamber. The outputs were recorded and later compared off line to conventional track fits. Two types of network architectures were studied. Applications of neural network tracking to high energy physics detector triggers is discussed

Making MUSIC: A multiple sampling ionization chamber

International Nuclear Information System (INIS)

Shumard, B.; Henderson, D.J.; Rehm, K.E.; Tang, X.D.

2007-01-01

A multiple sampling ionization chamber (MUSIC) was developed for use in conjunction with the Atlas scattering chamber (ATSCAT). This chamber was developed to study the (α, p) reaction in stable and radioactive beams. The gas filled ionization chamber is used as a target and detector for both particles in the outgoing channel (p + beam particles for elastic scattering or p + residual nucleus for (α, p) reactions). The MUSIC detector is followed by a Si array to provide a trigger for anode events. The anode events are gated by a gating grid so that only (α, p) reactions where the proton reaches the Si detector result in an anode event. The MUSIC detector is a segmented ionization chamber. The active length of the chamber is 11.95 in. and is divided into 16 equal anode segments (3.5 in. x 0.70 in. with 0.3 in. spacing between pads). The dead area of the chamber was reduced by the addition of a Delrin snout that extends 0.875 in. into the chamber from the front face, to which a mylar window is affixed. 0.5 in. above the anode is a Frisch grid that is held at ground potential. 0.5 in. above the Frisch grid is a gating grid. The gating grid functions as a drift electron barrier, effectively halting the gathering of signals. Setting two sets of alternating wires at differing potentials creates a lateral electric field which traps the drift electrons, stopping the collection of anode signals. The chamber also has a reinforced mylar exit window separating the Si array from the target gas. This allows protons from the (α, p) reaction to be detected. The detection of these protons opens the gating grid to allow the drift electrons released from the ionizing gas during the (α, p) reaction to reach the anode segment below the reaction

Making MUSIC: A multiple sampling ionization chamber

Science.gov (United States)

Shumard, B.; Henderson, D. J.; Rehm, K. E.; Tang, X. D.

2007-08-01

A multiple sampling ionization chamber (MUSIC) was developed for use in conjunction with the Atlas scattering chamber (ATSCAT). This chamber was developed to study the (α, p) reaction in stable and radioactive beams. The gas filled ionization chamber is used as a target and detector for both particles in the outgoing channel (p + beam particles for elastic scattering or p + residual nucleus for (α, p) reactions). The MUSIC detector is followed by a Si array to provide a trigger for anode events. The anode events are gated by a gating grid so that only (α, p) reactions where the proton reaches the Si detector result in an anode event. The MUSIC detector is a segmented ionization chamber. The active length of the chamber is 11.95 in. and is divided into 16 equal anode segments (3.5 in. × 0.70 in. with 0.3 in. spacing between pads). The dead area of the chamber was reduced by the addition of a Delrin snout that extends 0.875 in. into the chamber from the front face, to which a mylar window is affixed. 0.5 in. above the anode is a Frisch grid that is held at ground potential. 0.5 in. above the Frisch grid is a gating grid. The gating grid functions as a drift electron barrier, effectively halting the gathering of signals. Setting two sets of alternating wires at differing potentials creates a lateral electric field which traps the drift electrons, stopping the collection of anode signals. The chamber also has a reinforced mylar exit window separating the Si array from the target gas. This allows protons from the (α, p) reaction to be detected. The detection of these protons opens the gating grid to allow the drift electrons released from the ionizing gas during the (α, p) reaction to reach the anode segment below the reaction.

Making MUSIC: A multiple sampling ionization chamber

Energy Technology Data Exchange (ETDEWEB)

Shumard, B. [Argonne National Laboratory, Building 203 H-113, Argonne, IL 60439 (United States)]. E-mail: shumard@phy.anl.gov; Henderson, D.J. [Argonne National Laboratory, Building 203 H-113, Argonne, IL 60439 (United States); Rehm, K.E. [Argonne National Laboratory, Building 203 H-113, Argonne, IL 60439 (United States); Tang, X.D. [Argonne National Laboratory, Building 203 H-113, Argonne, IL 60439 (United States)

2007-08-15

A multiple sampling ionization chamber (MUSIC) was developed for use in conjunction with the Atlas scattering chamber (ATSCAT). This chamber was developed to study the ({alpha}, p) reaction in stable and radioactive beams. The gas filled ionization chamber is used as a target and detector for both particles in the outgoing channel (p + beam particles for elastic scattering or p + residual nucleus for ({alpha}, p) reactions). The MUSIC detector is followed by a Si array to provide a trigger for anode events. The anode events are gated by a gating grid so that only ({alpha}, p) reactions where the proton reaches the Si detector result in an anode event. The MUSIC detector is a segmented ionization chamber. The active length of the chamber is 11.95 in. and is divided into 16 equal anode segments (3.5 in. x 0.70 in. with 0.3 in. spacing between pads). The dead area of the chamber was reduced by the addition of a Delrin snout that extends 0.875 in. into the chamber from the front face, to which a mylar window is affixed. 0.5 in. above the anode is a Frisch grid that is held at ground potential. 0.5 in. above the Frisch grid is a gating grid. The gating grid functions as a drift electron barrier, effectively halting the gathering of signals. Setting two sets of alternating wires at differing potentials creates a lateral electric field which traps the drift electrons, stopping the collection of anode signals. The chamber also has a reinforced mylar exit window separating the Si array from the target gas. This allows protons from the ({alpha}, p) reaction to be detected. The detection of these protons opens the gating grid to allow the drift electrons released from the ionizing gas during the ({alpha}, p) reaction to reach the anode segment below the reaction.

Simple Cloud Chambers Using Gel Ice Packs

Science.gov (United States)

Kamata, Masahiro; Kubota, Miki

2012-01-01

Although cloud chambers are highly regarded as teaching aids for radiation education, school teachers have difficulty in using cloud chambers because they have to prepare dry ice or liquid nitrogen before the experiment. We developed a very simple and inexpensive cloud chamber that uses the contents of gel ice packs which can substitute for dry…

An experimental propane bubble chamber

International Nuclear Information System (INIS)

Rogozinski, A.

1957-01-01

Describes a propane bubble chamber 10 cm in diameter and 5 cm deep. The body of the chamber is in stainless steel, and it has two windows of polished hardened glass. The compression and decompression of the propane are performed either through a piston in direct contact with the liquid, or by the action on the liquid, through a triple-mylar-Perbunan membrane, of a compressed gas. The general and also optimum working conditions of the chamber are described, and a few results are given concerning, in particular, the tests of the breakage-resistance of the windows and the measurements of the thermal expansion of the compressibility isotherm for the propane employed. (author) [fr

Very high intensity reaction chamber design

International Nuclear Information System (INIS)

Devaney, J.J.

1975-09-01

The problem of achieving very high intensity irradiation by light in minimal regions was studied. Three types of irradiation chamber are suggested: the common laser-reaction chamber, the folded concentric or near-concentric resonator, and the asymmetric confocal resonator. In all designs the ratio of high-intensity illuminated volume to other volume is highly dependent (to the 3 / 2 power) on the power and fluence tolerances of optical elements, primarily mirrors. Optimization of energy coupling is discussed for the common cavity. For the concentric cavities, optimization for both coherent and incoherent beams is treated. Formulae and numerical examples give the size of chambers, aspect ratios, maximum pass number, image sizes, fluences, and the like. Similarly for the asymmetric confocal chamber, formulae and numerical examples for fluences, dimensions, losses, and totally contained pass numbers are given

Liquid ionization chambers for LET determination

DEFF Research Database (Denmark)

Kaiser, Franz-Joachim; Bassler, Niels; Tölli, Heikki

Liquid ionization chambers [1] (LICs) have have been used in the last decades as background dosemeters. Since a few years LICs are also commercially available for dosimetry and are used for measurements of dose distributions where a high spatial distribution is necessary. Also in the last decades...... a differential equation applying several simplifications and approximations leading to discrepancies between theory and experiments [3]. The theory predicts the collection efficiency as a function of the electrical field and was applied for both air filled ionization chambers and liquid filled ionization...... chambers. For liquids the LET can be roughly deduced from the collection efficiency dependency on the electrical field inside a liquid ionization chambers [4] using an extrapolation method. We solved the fundamental differential equation again presented by Jaffe numerically, but now taking into account...

DORIOT CLIMATIC CHAMBERS

Data.gov (United States)

Federal Laboratory Consortium — The Doriot Climatic Chambers reproduce environmental conditions occurring anywhere around the world. They provide an invaluable service by significantly reducing the...

Practical electron dosimetry: a comparison of different types of ionization chambers

International Nuclear Information System (INIS)

Dohm, O.S.; Christ, G.

2002-01-01

Since Markus chambers are no longer recommended in the 1997 DIN 6800-2 version there are uncertainties as to the use of alternative chamber types for electron dosimetry. Therefore, we performed a comparison between different types of ionization chambers. In particular, the widespread Farmer and Roos chambers were compared with the Markus chamber for polarity effect, chamber-to-chamber variation, and deviations of the measured absorbed dose relative to the value obtained with the Roos chamber (which is regarded as an ideal Bragg-Gray-chamber). The perturbation correction factor at 60 Co radiation was determined experimentally as 1,029 ± 0,5% (Roos chamber) and 1,018 ± 0,5% (Markus chamber) for the investigated plane-parallel chambers. In addition, we could show that the Roos chambers do not have a larger chamber-to-chamber variation than the Farmer chambers. Likewise, our results suggest that Farmer chambers could be used for electron energies above 6 MeV. (orig.) [de

Developments of the Estonian intellectual property system to meet the challenges of the knowledge-based economy : [doktoritöö] / Aleksei Kelli ; Tartu Ülikool ; juhendaja: Heiki Pisuke

Index Scriptorium Estoniae

Kelli, Aleksei, 1977-

2009-01-01

Sisaldab artikleid: Intellectual property in an innovation-based economy // Review of Central and East European Law (2008) nr. 2, lk. 223-238 (kaasautor Heiki Pisuke) ; Some issues of the Estonian innovation and intellectual property policy // Juridica International. XV. Tartu, 2008, lk. 104-114 ; Improvement of the intellectual property system as a measure to enhance innovation // Juridica International. XVI. Tartu, 2009, lk. 114-125 ; Some issues regarding entrepreneurial universities and intellectual property // Juridica International. XII. Tartu, 2007, lk. 161-172 (kaasautor Heiki Pisuke). - Tutvustus // Tartu Ülikooli doktorite promoveerimine 2010. Tartu, 2010, lk. 5-6

Sensitivity of gaseous xenon ionisation chambers (1961)

International Nuclear Information System (INIS)

Schuhl, C.

1960-01-01

It seems advantageous to fill an ionization chamber with xenon gas when this chamber is used for measuring a low intensity and high energy electron or positron beam, or monitoring a gamma beam. In the study of 5 to 50 MeV electrons, xenon allows for the ionization chamber yield, an improvement of a factor 4,5. (author) [fr

Ionization chamber correction factors for MR-linacs.

Science.gov (United States)

Pojtinger, Stefan; Dohm, Oliver Steffen; Kapsch, Ralf-Peter; Thorwarth, Daniela

2018-06-07

Previously, readings of air-filled ionization chambers have been described as being influenced by magnetic fields. To use these chambers for dosimetry in magnetic resonance guided radiotherapy (MRgRT), this effect must be taken into account by introducing a correction factor k B . The purpose of this study is to systematically investigate k B for a typical reference setup for commercially available ionization chambers with different magnetic field strengths. The Monte Carlo simulation tool EGSnrc was used to simulate eight commercially available ionization chambers in magnetic fields whose magnetic flux density was in the range of 0-2.5 T. To validate the simulation, the influence of the magnetic field was experimentally determined for a PTW30013 Farmer-type chamber for magnetic flux densities between 0 and 1.425 T. Changes in the detector response of up to 8% depending on the magnetic flux density, on the chamber geometry and on the chamber orientation were obtained. In the experimental setup, a maximum deviation of less than 2% was observed when comparing measured values with simulated values. Dedicated values for two MR-linac systems (ViewRay MRIdian, ViewRay Inc, Cleveland, United States, 0.35 T/ 6 MV and Elekta Unity, Elekta AB, Stockholm, Sweden, 1.5 T/7 MV) were determined for future use in reference dosimetry. Simulated values for thimble-type chambers are in good agreement with experiments as well as with the results of previous publications. After further experimental validation, the results can be considered for definition of standard protocols for purposes of reference dosimetry in MRgRT.

Ionization chamber correction factors for MR-linacs

Science.gov (United States)

Pojtinger, Stefan; Steffen Dohm, Oliver; Kapsch, Ralf-Peter; Thorwarth, Daniela

2018-06-01

Previously, readings of air-filled ionization chambers have been described as being influenced by magnetic fields. To use these chambers for dosimetry in magnetic resonance guided radiotherapy (MRgRT), this effect must be taken into account by introducing a correction factor k B. The purpose of this study is to systematically investigate k B for a typical reference setup for commercially available ionization chambers with different magnetic field strengths. The Monte Carlo simulation tool EGSnrc was used to simulate eight commercially available ionization chambers in magnetic fields whose magnetic flux density was in the range of 0–2.5 T. To validate the simulation, the influence of the magnetic field was experimentally determined for a PTW30013 Farmer-type chamber for magnetic flux densities between 0 and 1.425 T. Changes in the detector response of up to 8% depending on the magnetic flux density, on the chamber geometry and on the chamber orientation were obtained. In the experimental setup, a maximum deviation of less than 2% was observed when comparing measured values with simulated values. Dedicated values for two MR-linac systems (ViewRay MRIdian, ViewRay Inc, Cleveland, United States, 0.35 T/ 6 MV and Elekta Unity, Elekta AB, Stockholm, Sweden, 1.5 T/7 MV) were determined for future use in reference dosimetry. Simulated values for thimble-type chambers are in good agreement with experiments as well as with the results of previous publications. After further experimental validation, the results can be considered for definition of standard protocols for purposes of reference dosimetry in MRgRT.

Supervision, mentorship and peer networks: how Estonian early career researchers get (or fail to get support

Directory of Open Access Journals (Sweden)

Jaana Eigi

2018-03-01

Full Text Available The paper analyses issues related to supervision and support of early career researchers in Estonian academia. We use nine focus groups interviews conducted in 2015 with representatives of social sciences in order to identify early career researchers’ needs with respect to support, frustrations they may experience, and resources they may have for addressing them. Our crucial contribution is the identification of wider support networks of peers and colleagues that may compensate, partially or even fully, for failures of official supervision. On the basis of our analysis we argue that support for early career researchers should take into account the resources they already possess but also recognise the importance of wider academic culture, including funding and employment patterns, and the roles of supervisors and senior researchers in ensuring successful functioning of support networks. Through analysing the conditions for the development of early career researchers – producers of knowledge – our paper contributes to social epistemology understood as analysis of specific forms of social organisation of knowledge production.

Bubble chamber: Omega production and decay

CERN Multimedia

1973-01-01

This image is of real particle tracks taken from the CERN 2 m liquid hydrogen bubble chamber and shows the production and decay of a negative omega particle. A negative kaon enters the chamber which decays into many particles, including a negative omega that travels a short distance before decaying into more particles. The invention of bubble chambers in 1952 revolutionized the field of particle physics, allowing real tracks left by particles to be seen and photographed by expanding liquid that had been heated to boiling point.

Evaluation of carbon dioxide dissipation within a euthanasia chamber.

Science.gov (United States)

Djoufack-Momo, Shelly M; Amparan, Ashlee A; Grunden, Beverly; Boivin, Gregory P-

2014-07-01

CO₂ euthanasia is used widely for small laboratory animals, such as rodents. A common necessity in many animal research facilities is to euthanize mice in sequential batches. We assessed the effects of several variables on the time it took for CO₂ to dissipate within a chamber. Using standard euthanasia time, changes in flow rate were compared between a slow 15% fill rate for 7 min, and a slow 15% followed by a rapid 50% filling for a total of 5 min. Additional variables assessed included the effects of opening the lid after the completion of chamber filling, turning the chamber over after completion of filling, and the use and removal of a cage from within the chamber. For all trials, CO₂ levels in the chambers peaked between 50% and 80%. After the gas was turned off, the concentration of CO₂ dropped to below 10% COv within 2 min, except when the lid was left on the chamber, where concentration levels remained above 10% after 20 min. CO₂ dissipation was significantly faster when the chamber was turned upside down after filling. Significant interaction effects occurred among the factors of cage presence within the chamber, flow rate, and chamber position. Only leaving the lid on the chamber had any practical implication for delaying CO₂ dissipation. We recommend that users allow 2 min for CO₂ to clear from the chamber before subsequent euthanasia procedures, unless the chamber is manipulated to increase the dissipation rate.

D0 central tracking chamber performance studies

International Nuclear Information System (INIS)

Pizzuto, D.

1991-12-01

The performance of the completed DO central tracking chamber was studied using cosmic rays at the State University of New York at Stony Brook. Also studied was a prototype tracking chamber identical in design to the completed DO tracking chamber. The prototype chamber was exposed to a collimated beam of 150 GeV pions at the Fermilab NWA test facility. Results indicate an RΦ tracking resolution compatible with the limitations imposed by physical considerations, excellent 2 track resolution, and a high track reconstruction efficiency along with a good rejection power against γ → e + e - events

Personality traits and eating habits in a large sample of Estonians.

Science.gov (United States)

Mõttus, René; Realo, Anu; Allik, Jüri; Deary, Ian J; Esko, Tõnu; Metspalu, Andres

2012-11-01

Diet has health consequences, which makes knowing the psychological correlates of dietary habits important. Associations between dietary habits and personality traits were examined in a large sample of Estonians (N = 1,691) aged between 18 and 89 years. Dietary habits were measured using 11 items, which grouped into two factors reflecting (a) health aware and (b) traditional dietary patterns. The health aware diet factor was defined by eating more cereal and dairy products, fish, vegetables and fruits. The traditional diet factor was defined by eating more potatoes, meat and meat products, and bread. Personality was assessed by participants themselves and by people who knew them well. The questionnaire used was the NEO Personality Inventory-3, which measures the Five-Factor Model personality broad traits of Neuroticism, Extraversion, Openness, Agreeableness, and Conscientiousness, along with six facets for each trait. Gender, age and educational level were controlled for. Higher scores on the health aware diet factor were associated with lower Neuroticism, and higher Extraversion, Openness and Conscientiousness (effect sizes were modest: r = .11 to 0.17 in self-ratings, and r = .08 to 0.11 in informant-ratings, ps < 0.01 or lower). Higher scores on the traditional diet factor were related to lower levels of Openness (r = -0.14 and -0.13, p < .001, self- and informant-ratings, respectively). Endorsement of healthy and avoidance of traditional dietary items are associated with people's personality trait levels, especially higher Openness. The results may inform dietary interventions with respect to possible barriers to diet change.

Argus drift chamber

Energy Technology Data Exchange (ETDEWEB)

Danilov, M; Nagovizin, V; Hasemann, H; Michel, E; Schmidt-Parzefall, W; Wurth, R; Kim, P

1983-11-15

The ARGUS detector came into operation at the DORIS-II e/sup +/s/sup -/ storage ring at the end of 1982. Its two meter long drift chamber contains 5940 sense and 24588 field wires organized in uniform 18x18.8 mm/sup 2/ drift cells filling the whole volume. These cells form 36 layers, 18 of which provide stereo views. Each sense wire is equipped with a single hit TDC and ADC for coordinate and dE/dx measurements. The chamber is operated with propane to improve momentum and dE/dx resolution. The drift chamber design and initial performance are presented. With a very crude space-time relation approximation and without all the necessary corrections applied a spatial resolution of about 200 ..mu..m was obtained for half of the drift cell volume. Further corrections should improve this result. An intrinsic dE/dx resolution of 4.2% and an actual resolution of 5% were obtained for cosmic muons and also for Bhabha scattered electrons. An actual dE/dx resolution of 5.6% was obtained for pions from e/sup +/e/sup -/ annihilation data with almost no track selection. A relativistic rise of 30% was observed in good agreement with theory. The long-term stability is still to be investigated.

The wide gap resistive plate chamber

International Nuclear Information System (INIS)

Crotty, I.; Lamas Valverde, J.; Hatzifotiadou, D.; Williams, M.C.S.; Zichichi, A.

1995-01-01

The resistive plate chamber (RPC) has good time and position resolution; these factors (coupled to its simple construction) make it an attractive candidate for muon trigger systems at future colliders. However, operated in spark mode, the RPC has severe rate problems that make it unusable above 10 Hz/cm 2 . We have previously published our results concerning the operation of the RPC in spark and in avalanche mode; we have shown that the rate limit can be increased to 150 Hz/cm 2 if the RPC is operated in avalanche mode. Here, we discuss the performance of chambers with 6 and 8 mm gas gaps (compared to the more usual 2 mm gap). We outline the reasons for this choice, and also discuss anode versus cathode strip readout. We have measured the efficiency versus flux, and also show that an enhanced rate limit can be obtained if only a small region of the chamber is exposed to the beam (spot illumination). Finally we have tested the performance of chambers constructed with other materials for the resistiv e plate and compare it to chambers constructed with our preferred plastic, melamine laminate. (orig.)

HYLIFE-II reactor chamber design refinements

International Nuclear Information System (INIS)

House, P.A.

1994-06-01

Mechanical design features of the reactor chamber for the HYLIFE-II inertial confinement fusion power plant are presented. A combination of oscillating and steady, molten salt streams (Li 2 BeF 4 ) are used for shielding and blast protection of the chamber walls. The system is designed for a 6 Hz repetition rate. Beam path clearing, between shots, is accomplished with the oscillating flow. The mechanism for generating the oscillating streams is described. A design configuration of the vessel wall allows adequate cooling and provides extra shielding to reduce thermal stresses to tolerable levels. The bottom portion of the reactor chamber is designed to minimize splash back of the high velocity (>12 m/s) salt streams and also recover up to half of the dynamic head. Cost estimates for a 1 GWe and 2 GWe reactor chamber are presented

Dilution refrigeration with multiple mixing chambers

International Nuclear Information System (INIS)

Coops, G.M.

1981-01-01

A dilution refrigerator is an instrument to reach temperatures in the mK region in a continuous way. The temperature range can be extended and the cooling power can be enlarged by adding an extra mixing chamber. In this way we obtain a double mixing chamber system. In this thesis the theory of the multiple mixing chamber is presented and tested on its validity by comparison with the measurements. Measurements on a dilution refrigerator with a circulation rate up to 2.5 mmol/s are also reported. (Auth.)

MDT Commissioning Procedures Guidelines for Certifying RFI Chambers

CERN Document Server

Beretta, M; Branchini, P; Kourkoumelis, C; Dubbert, J; Gazis, E N; Hertenberger, R; Hurst, P; Kojine, A; Lanza, A; Marin, A; Mockett, P; Petridou, C; Tskhadadze, E G; Valente, P; Wotschack, J; Xie, Y; Zhao, Z

2004-01-01

Aim of the document is the definition of a common set of guidelines and test procedures for commissioning the MDT chambers. Commissioning is different for Barrel and Endcap chambers. The former will be tested at a single chamber level before going to the ATLAS pit, ready for the last quick test before final installation, while the latter will be first tested at a single chamber level (phase one), then installed into the Small and Big Wheel sectors (SW and BW), tested after the integration (phase two) and transported to the ATLAS pit for final wheel installation. The present document concerns all tests, including those of phase two for Endcap chambers, but it is possible that some specific tests, at the moment not planned, will be implemented during the Endcap phase two commissioning. It is composed of three sections: 1 â€" Guidelines for checking chamber conformity, where the main rules for declaring that chambers conform to the reference drawings and requirements are described; 2 â€" Commissioning tests,...

Lifetime survivability of contaminated target-chamber optics

International Nuclear Information System (INIS)

Rainer, F.; Anderson, A.; Burnham, A.; Milam, D.; Turner, R.

1996-11-01

Target chambers used for Inertial Confinement Fusion (ICF) expose laser optics to a very hostile environment, not only from high-fluence laser irradiation but also x-ray irradiation and particulate debris from targets and chamber wall materials. Expendable debris shields provide the first line of defense to more costly optics upstream in the laser beam path to contaminants generated within the target chamber. However, the replacement of a large number of debris shields is also an expensive proposition so that extending their usable lifetime within the chamber is important. We have conducted tests to show that optics can both be cleaned and damaged by laser irradiation at 355 nm after being contaminated with potential chamber-wall materials such as B 4 C and Al 2 O 3 . Such optics can survive from one to hundreds of laser shots, depending on degree of contamination and laser fluence levels. Similarly, we have studied the survivability of optics that have been exposed to direct contamination from representative target materials irradiated in the target chamber. We have also studied the effects on optics that were not directly exposed to targets, yet received secondary exposure from the above directly-exposed samples

Vacuum Chamber for the Booster Bending Magnets

CERN Multimedia

CERN PhotoLab

1974-01-01

To minimize eddy currents, induced by the rising magnetic field, the chamber was made from thin stainless steel of high specific electric resistance. For mechanical stength, it was corrugated in a hydro-forming process. The chamber is curved, to follow the beam's orbital path. Under vacuum, the chamber tends to staighten, the ceramic spacer along half of its length keeps it in place (see also 7402458).

Construction and performance of large flash chambers

International Nuclear Information System (INIS)

Taylor, F.E.; Bogert, D.; Fisk, R.; Stutte, L.; Walker, J.K.; Wolfson, J.; Abolins, M.; Ernwein, J.; Owen, D.; Lyons, T.

1979-01-01

The construction and performance of 12' x 12' flash chambers used in a 340 ton neutrino detector under construction at Fermilab is described. The flash chambers supply digital information with a spatial resolution of 0.2'', and are used to finely sample the shower development of the reaction products of neutrino interactions. The flash chambers are easy and inexpensive to build and are electronically read out

The knife-edge chamber

International Nuclear Information System (INIS)

Barasch, E.F.; Bowcock, T.J.V.; Drew, M.M.; Elliott, S.M.; Lee, B.; McIntyre, P.M.; Pang, Y.; Popovic, M.; Smith, D.D.

1990-01-01

In this paper the design for a new technology for particle track detectors is described. Using standard IC fabrication techniques, a pattern of microscopic knife edges and field-shaping electrodes can be fabricated on a silicon substrate. The knife-edge chamber uniquely offers attractive performance for the track chambers required for SSC detectors, for which no present technology is yet satisfactory. Its features include: excellent radiation hardness (10 Mrad), excellent spatial resolution (∼20 μm), short drift time (20 ns), and large pulse height (1 mV)

Multiple chamber ionization detector

International Nuclear Information System (INIS)

Solomon, E.E.

1982-01-01

An ionization smoke detector employs a single radiation source in a construction comprising at least two chambers with a center or node electrode. The radioactive source is associated with this central electrode, and its positioning may be adjusted relative to the electrode to alter the proportion of the source that protrudes into each chamber. The source may also be mounted in the plane of the central electrode, and positioned relative to the center of the electrode. The central electrode or source may be made tiltable relative to the body of the detector

Ionization chamber gradient effects in nonstandard beam configurations

International Nuclear Information System (INIS)

Bouchard, Hugo; Seuntjens, Jan; Carrier, Jean-Francois; Kawrakow, Iwan

2009-01-01

Purpose: For the purpose of nonstandard beam reference dosimetry, the current concept of reporting absorbed dose at a point in water located at a representative position in the chamber volume is investigated in detail. As new nonstandard beam reference dosimetry protocols are under development, an evaluation of the role played by the definition of point of measurement could lead to conceptual improvements prior to establishing measurement procedures. Methods: The present study uses the current definition of reporting absorbed dose to calculate ionization chamber perturbation factors for two cylindrical chamber models (Exradin A12 and A14) using the Monte Carlo method. The EGSnrc based user-code EGS lowbar chamber is used to calculate chamber dose responses of 14 IMRT beams chosen to cause considerable dose gradients over the chamber volume as previously used by Bouchard and Seuntjens [''Ionization chamber-based reference dosimetry of intensity modulated radiation beams,'' Med. Phys. 31(9), 2454-5465 (2004)]. Results: The study shows conclusively the relative importance of each physical effect involved in the nonstandard beam correction factors of 14 IMRT beams. Of all correction factors involved in the dosimetry of the beams studied, the gradient perturbation correction factor has the highest magnitude, on average, 11% higher compared to reference conditions for the Exradin A12 chamber and about 5% higher for the Extradin A14 chamber. Other perturbation correction factors (i.e., P wall , P stem , and P cel ) are, on average, less than 0.8% different from reference conditions for the chambers and beams studied. The current approach of reporting measured absorbed dose at a point in water coinciding with the location of the centroid of the chamber is the main factor responsible for large correction factors in nonstandard beam deliveries (e.g., intensity modulated radiation therapy) reported in literature. Conclusions: To reduce or eliminate the magnitude of

21 CFR 866.2120 - Anaerobic chamber.

Science.gov (United States)

2010-04-01

... and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES IMMUNOLOGY AND MICROBIOLOGY DEVICES Microbiology Devices § 866.2120 Anaerobic chamber. (a) Identification. An anaerobic chamber is a device intended for medical purposes to maintain an anaerobic (oxygen...

A small flat fission chamber

International Nuclear Information System (INIS)

Li Yijun; Wang Dalun; Chen Suhe

1999-01-01

With fission materials of depleted uranium, natural uranium, enriched uranium, 239 Pu, and 237 Np, the authors have designed and made a series of small flat fission chamber. The authors narrated the construction of the fission chamber and its technological process of manufacture, and furthermore, the authors have measured and discussed the follow correct factor, self-absorption, boundary effect, threshold loss factor, bottom scatter and or so

Lifetime tests for MAC vertex chamber

International Nuclear Information System (INIS)

Nelson, H.

1986-01-01

A vertex chamber for MAC was proposed in fall 1983 to increase precision in the measurement of the B hadron and tau lepton lifetimes. The chamber had to be placed within the existing central drift chamber, making access for repairs difficult and costly. Therefore for detector elements thin-walled aluminized mylar drift tubes (straws) were used because of their simplicity and robustness. The diameter of the drift tubes was 6.9 mm. The radial extent of the proposed chamber was from 3 cm to 10 cm, the inner wall of the central drift. It was clear that radiation levels, from synchrotron x-rays and overfocussed electrons, were potentially high. Since the drift distance is short in the straws, it was desirable to operate them at the highest possible gas gain, to achieve the best spatial resolution. There was a likelihood of drawing large currents in the chamber and thus causing radiation damage. Therefore a study of radiation hardness under the conditions of their proposed design was undertaken. In tests, argon-hydrocarbon mixtures consistently became unusable at ∼0.05 C/cm collected charge, due to anode buildup. Argon-CO 2 mixtures, while underquenched, were operational to 0.25 C/cm, at which point loss of cathode material became intolerable. Argon-xenon-CO 2 proved to be quenched as well as argon-hydrocarbons, but was limited by cathode damage. The MAC vertex chamber has operated at a distance of 4.6 cm from the e + e - interaction point at PEP for two years and has shown no aging effects

Organizational culture based on the example of an Estonian hospital.

Science.gov (United States)

Saame, Iisi; Reino, Anne; Vadi, Maaja

2011-01-01

The concept of organisational culture (also referred to later as OC) is one of the approaches in modern organisational analysis exploring the values, attitudes and beliefs behind human behaviour in the workplace. OC as a social phenomenon is considered to be important for the sustainability of every organisation. In the service sector, OC may affect the nature and quality of the services provided. The aim of this paper is twofold: on the one hand, to highlight the patterns of OC in a hospital; and, on the other hand, to outline relationships between OC and patient satisfaction. The study was conducted in Tartu University Hospital, one of the most influential health care organisations in Estonia. This paper has original value by presenting an insight into organisational culture in the Estonian health care sector, and the findings of the study will expand knowledge of OC in the health care sector in general. The OC instrument applied in a quantitative cross-sectional study was earlier developed according to the Competing Values Framework (CVF). Data from 456 medical and non-medical professionals were analysed using non-parametric tests of descriptive statistics. A factor analysis was performed to assess the instrument's compatibility for analysing the OC pattern in the health care sector. The dominant culture type in all the groups investigated was the Internal Processes type, mainly followed by the Rational Goal type, while different cultural patterns were observed in professional groups. The factor analysis yielded a three-subscale solution. Clinics with high patient satisfaction did not score more than clinics with low patient satisfaction in terms of the Human Relations type. In future studies a random sample design and a multidisciplinary approach to OC research should be followed in order to further explore OC patterns in hospitals and their consequences for different aspects of hospital performance.

Power without manpower: Forecasting labour demand for Estonian energy sector

International Nuclear Information System (INIS)

Meriküll, Jaanika; Eamets, Raul; Humal, Katrin; Espenberg, Kerly

2012-01-01

As energy demand and prices continue to grow, oil shale might help mitigate the energy crisis—it can widely be found all over the world but so far has not been widely used. Estonia is unique in the world for producing a large majority of energy out of oil shale and has been set as an example in numerous papers covering oil shale deposits, technology etc. This paper is the first to analyse oil shale energy related workforce and provides scenario forecasts of the labour demand for the Estonian energy sector in 2010–2020. The contribution of the paper is twofold. First, the paper provides a valuable insight into oil shale energy related workforce, enabling to take into consideration the educational needs in countries where oil shale industry might be set up. Second, methodology-wise, the paper relates labour demand and supply to different scenarios of energy production capacities. The results illustrate problems related to aging of the workforce in energy production. If the existing trends continue in educational attainment in Estonia, there will be a serious shortage of high-skilled engineering and manufacturing specialists. Our method provides a simple yet reliable enough way to check for such problems early enough. - Highlights: ► This paper analyses oil shale energy related workforce and provides scenario forecasts. ► This is the first study to investigate the workforce related to oil shale energy production. ► The main workforce-related problem in the sector is ageing of the workforce. ► Workers immigrating to the sector during the Soviet times are at the retirement age. ► There will be a serious shortage of engineers for energy sector in the near future.

Acoustic-Levitation Chamber

Science.gov (United States)

Barmatz, M. B.; Granett, D.; Lee, M. C.

1984-01-01

Uncontaminated environments for highly-pure material processing provided within completely sealed levitation chamber that suspends particles by acoustic excitation. Technique ideally suited for material processing in low gravity environment of space.

Polarity effects and apparent ion recombination in microionization chambers

Energy Technology Data Exchange (ETDEWEB)

Miller, Jessica R., E-mail: miller@humonc.wisc.edu [Department of Medical Physics, University of Wisconsin-Madison, Madison, Wisconsin 53705 and Department of Human Oncology, University of Wisconsin-Madison, Madison, Wisconsin 53792 (United States); Hooten, Brian D. [Standard Imaging, Middleton, Wisconsin 53562 (United States); Micka, John A.; DeWerd, Larry A. [Department of Medical Physics, University of Wisconsin-Madison, Madison, Wisconsin 53705 (United States)

2016-05-15

Purpose: Microchambers demonstrate anomalous voltage-dependent polarity effects. Existing polarity and ion recombination correction factors do not account for these effects. As a result, many commercial microchamber models do not meet the specification of a reference-class ionization chamber as defined by the American Association of Physicists in Medicine. The purpose of this investigation is to determine the cause of these voltage-dependent polarity effects. Methods: A series of microchamber prototypes were produced to isolate the source of the voltage-dependent polarity effects. Parameters including ionization-chamber collecting-volume size, stem and cable irradiation, chamber assembly, contaminants, high-Z materials, and individual chamber components were investigated. Measurements were performed with electrodes coated with graphite to isolate electrode conductivity. Chamber response was measured as the potential bias of the guard electrode was altered with respect to the collecting electrode, through the integration of additional power supplies. Ionization chamber models were also simulated using COMSOL Multiphysics software to investigate the effect of a potential difference between electrodes on electric field lines and collecting volume definition. Results: Investigations with microchamber prototypes demonstrated that the significant source of the voltage-dependent polarity effects was a potential difference between the guard and collecting electrodes of the chambers. The voltage-dependent polarity effects for each prototype were primarily isolated to either the guard or collecting electrode. Polarity effects were reduced by coating the isolated electrode with a conductive layer of graphite. Polarity effects were increased by introducing a potential difference between the electrodes. COMSOL simulations further demonstrated that for a given potential difference between electrodes, the collecting volume of the chamber changed as the applied voltage was altered

Repair of isolated double-chambered right ventricle | El Kouache ...

African Journals Online (AJOL)

The finding of a double-chambered right ventricle (DCRV) is exceptionally rare as an isolated anomaly. It is a congenital cardiac anomaly in which the right ventricle is separated into two chambers, a proximal highpressure chamber and a distal low-pressure chamber, by anomalous muscles or fibrous tissues in the right ...

Vacuum chamber 'bicone'

CERN Multimedia

1977-01-01

This chamber is now in the National Museum of History and Technology, Smithsonian Institution, Washington, DC, USA, where it was exposed in an exhibit on the History of High Energy Accelerators (1977).

Study on target interactions in emulsion chamber - Brasil-Japan emulsion chamber collaboration

Science.gov (United States)

Ballester, M.; Santos, C.; Bellandi Filho, J.; Chinellato, J. A.; Dobrigkeit, C.; Lattes, C. M. G.; Marques, A.; Menon, M. J.; Navia, C. E.; Sawayanagi, K.

Experimental results are presented from observations of 80 target nuclear interactions where the total gamma-ray energy is greater than or equal to 20 TeV. Evidence is presented for the existence of two types of interactions; the interpretation is given on the basis of a fire-ball model. Two-story emulsion chambers exposed at Mount Chacaltaya, in Bolivia (5,220 m above sea level), are used. Gamma rays from nuclear interactions in the target layer of petroleum pitch (1/3 of the nuclear mean free path in thickness) are detected through observations of the electron showers generated by them in the lower chamber

Climate chamber for environmentally controlled laboratory airflow experiments.

Science.gov (United States)

Even-Tzur, Nurit; Zaretsky, Uri; Grinberg, Orly; Davidovich, Tomer; Kloog, Yoel; Wolf, Michael; Elad, David

2010-01-01

Climate chambers have been widely used in in vitro and in vivo studies which require controlled environmental temperature and humidity conditions. This article describes a new desktop climate chamber that was developed for application of respiratory airflows on cultured nasal epithelial cells (NEC) under controlled temperature and humidity conditions. Flow experiments were performed by connecting the climate chamber to an airflow generator via a flow chamber with cultured NEC. Experiments at two controlled climate conditions, 25 degrees C and 40% relative humidity (RH) and 37 degrees C and 80%RH, were conducted to study mucin secretion from the cultures inresponse to the flow. The new climate chamber is a relatively simple and inexpensive apparatus which can easily be connected to any flow system for climate controlled flow experiments. This chamber can be easily adjusted to various in vitro experiments, as well as to clinical studies with animals or human subjects which require controlled climate conditions.

Investigation of a multiwire proportional chamber

International Nuclear Information System (INIS)

Konijn, J.

1976-01-01

The article discusses some aspects of a prototype multiwire proportional chamber for electron detection located at IKO in Amsterdam, i.e. voltage, counting rates, noise and gas mixture (argon, ethylene bromide). The efficiency and performance of the chamber have been investigated and an error analysis is given

Triangular tube proportional wire chamber system

Energy Technology Data Exchange (ETDEWEB)

Badtke, D H; Bakken, J A; Barnett, B A; Blumenfeld, B J; Chien, C Y; Madansky, L; Matthews, J A.J.; Pevsner, A; Spangler, W J [Johns Hopkins Univ., Baltimore, MD (USA); Lee, K L [California Univ., Berkeley (USA). Lawrence Berkeley Lab.

1981-10-15

We report on the characteristics of the proportional tube chamber system which has been constructed for muon identification in the PEP-4 experiment at SLAC. The mechanical and electrical properties of the extruded aluminum triangular tubes allow these detectors to be used as crude drift chambers.

The Mark III vertex chamber and prototype test results

International Nuclear Information System (INIS)

Grab, C.

1987-07-01

A vertex chamber has been constructed for use in the Mark III experiment. The chamber is positioned inside the current main drift chamber and will be used to trigger data collection, to aid in vertex reconstruction, and to improve the momentum resolution. This paper discusses the chamber's construction and performance and tests of the prototype

The OPAL vertex drift chamber

International Nuclear Information System (INIS)

Carter, J.R.; Elcombe, P.A.; Hill, J.C.; Roach, C.M.; Armitage, J.C.; Carnegie, R.K.; Estabrooks, P.; Hemingway, R.; Karlen, D.; McPherson, A.; Pinfold, J.; Roney, J.M.; Routenburg, P.; Waterhouse, J.; Hargrove, C.K.; Klem, D.; Oakham, F.G.; Carter, A.A.; Jones, R.W.L.; Lasota, M.M.B.; Lloyd, S.L.; Pritchard, T.W.; Wyatt, T.R.

1990-01-01

A high precision vertex drift chamber has been installed in the OPAL experiment at LEP. The design of the chamber and the associated readout electronics is described. The performance of the system has been studied using cosmic ray muons and the results of these studies are presented. A space resolution of 50 μm in the drift direction is obtained using the OPAL central detector gas mixture at 4 bar. (orig.)

Chamber for Aerosol Deposition of Bioparticles

Science.gov (United States)

Kern, Roger; Kirschner, Larry

2008-01-01

Laboratory apparatus is depicted that is a chamber for aerosol deposition of bioparticles on surfaces of test coupons. It is designed for primary use in inoculating both flat and three-dimensional objects with approximately reproducible, uniform dispersions of bacterial spores of the genus Bacillus so that the objects could be used as standards for removal of the spores by quantitative surface sampling and/or cleaning processes. The apparatus is also designed for deposition of particles other than bacterial spores, including fungal spores, viruses, bacteriophages, and standard micron-sized beads. The novelty of the apparatus lies in the combination of a controllable nebulization system with a settling chamber large enough to contain a significant number of test coupons. Several companies market other nebulizer systems, but none are known to include chambers for deposition of bioparticles to mimic the natural fallout of bioparticles. The nebulization system is an expanded and improved version of commercially available aerosol generators that include nebulizers and drying columns. In comparison with a typical commercial aerosol generator, this system includes additional, higher-resolution flowmeters and an additional pressure regulator. Also, unlike a typical commercial aerosol generator, it includes stopcocks for separately controlling flows of gases to the nebulizer and drying column. To maximize the degree of uniformity of dispersion of bioaerosol, the chamber is shaped as an axisymmetrical cylinder and the aerosol generator is positioned centrally within the chamber and aimed upward like a fountain. In order to minimize electric charge associated with the aerosol particles, the drying column is made of aluminum, the drying column is in direct contact with an aluminum base plate, and three equally spaced Po-210 antistatic strips are located at the exit end of the drying column. The sides and top of the chamber are made of an acrylic polymer; to prevent

Construction of radon/radon daughter calibraton chamber

International Nuclear Information System (INIS)

Fry, J.; Gan, T.H.; Leach, V.A.; Saddlier, J.; Solomon, S.B.; Tam, K.K.; Travis, E.; Wykes, P.

1983-01-01

The radon/radon daughter test chamber is a copper lined room 1.65x1.75x2.75m with an effective volume of 8000 litres. The air residence time is controlled by circulating the air in the chamber through absolute filters which remove 99.9% of particulates. Radon is drawn into the chamber from a 17 μCi 226 RaCl source using the pressure differential across the blowers (<3 psi)

30 CFR 56.7807 - Flushing the combustion chamber.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Flushing the combustion chamber. 56.7807 Section 56.7807 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Rotary Jet Piercing Rotary Jet Piercing § 56.7807 Flushing the combustion chamber. The combustion chamber...

Scale testing of a partially confined blast chamber

CSIR Research Space (South Africa)

Grundling, W

2012-10-01

Full Text Available in pressure readings. A scale model of the blast chamber, Emily, was constructed with the addition of a pendulum plate hanging concentrically covering 65% of the open area. PURPOSE OF SCALED BLAST CHAMBER The purpose of this particular test is to evaluate... PHASE Illustrated in Figure 3 and 4 are the results obtained during testing of the scaled blast chamber. In both cases the pressure dissipates over time, showing pulsating behaviour as the shockwaves reflect off the chamber walls. By looking...

Recent developments in wire chamber tracking at SSC

International Nuclear Information System (INIS)

Ogren, H.

1990-01-01

All of the major SSC proposed detectors use wire chambers in their tracking systems. The feasibility of wire chambers in an SSC detector has now been established by a number of groups planning detectors at SSC. The major advances during the past year in understanding straw tube drift chambers are presented and several innovations in gaseous wire chambers are discussed. The R and D section will concentrate on progress in drift cell design, electronics and signal processing, and engineering aspects of the tracking designs

50 bougies musicales pour le CERN

CERN Multimedia

Bonier, Sylvie

2004-01-01

As part of the celebrations for CERN's fiftieth anniversary, the violinist Maxim Vengerov will join the Royal Philharmonic of London, conducted by Genevan Tommasco Placidi, at the Victoria Hall on Saturday 18th December (1 page)

Method of controlling weld chamber purge and cover gas atmosphere

International Nuclear Information System (INIS)

Yeo, D.

1992-01-01

A method of controlling the gas atmosphere in a welding chamber includes detecting the absence of a fuel rod from the welding chamber and, in response thereto, initiating the supplying of a flow of argon gas to the chamber to purge air therefrom. Further, the method includes detecting the entry of a fuel rod in the welding chamber and, in response thereto, terminating the supplying of the flow of argon gas to the chamber and initiating the supplying of a flow of helium gas to the chamber to purge argon gas therefrom and displace the argon gas in the chamber. Also, the method includes detecting the withdrawal of the fuel rod from the welding chamber and, in response thereto, terminating the supplying of the flow of helium gas to the chamber and initiating the supplying of argon to the chamber to purge the air therefrom. The method also includes detecting the initiation of a weld cycle and, in response thereto, momentarily supplying a flow of argon gas to the welding electrode tip for initiating the welding arc. (Author)

Optical spark chamber

CERN Multimedia

CERN PhotoLab

1971-01-01

An optical spark chamber developed for use in the Omega spectrometer. On the left the supporting frame is exceptionally thin to allow low momentum particles to escape and be detected outside the magnetic field.

The Honeycomb Strip Chamber

International Nuclear Information System (INIS)

Graaf, Harry van der; Buskens, Joop; Rewiersma, Paul; Koenig, Adriaan; Wijnen, Thei

1991-06-01

The Honeycomb Strip Chamber (HSC) is a new position sensitive detector. It consists of a stack of folded foils, forming a rigid honeycomb structure. In the centre of each hexagonal cell a wire is strung. Conducting strips on the foils, perpendicular to the wires, pick up the induced avalanche charge. Test results of a prototype show that processing the signals form three adjacent strips nearest to the track gives a spatial resolution better than 64 μm for perpendicular incident tracks. The chamber performance is only slightly affected by a magnetic field. (author). 25 refs.; 21 figs

micro strip gas chamber

CERN Multimedia

1998-01-01

About 16 000 Micro Strip Gas Chambers like this one will be used in the CMS tracking detector. They will measure the tracks of charged particles to a hundredth of a millimetre precision in the region near the collision point where the density of particles is very high. Each chamber is filled with a gas mixture of argon and dimethyl ether. Charged particles passing through ionise the gas, knocking out electrons which are collected on the aluminium strips visible under the microscope. Such detectors are being used in radiography. They give higher resolution imaging and reduce the required dose of radiation.

Simulated Field Trials Using an Indoor Aerosol Test Chamber

National Research Council Canada - National Science Library

Semler, D. D; Roth, A. P; Semler, K. A; Nolan, P. M

2004-01-01

.... In this method, the aerosol chamber control software manipulates circulation fan speeds, chamber vacuum and agent spray times to produce a simulated dynamic cloud within the aerosol test chamber...

Simulated Field Trials Using An Indoor Aerosol Test Chamber

National Research Council Canada - National Science Library

Semler, D. D; Roth, A. P; Semler, K. A; Nolan, P. M

2004-01-01

.... In this method, the aerosol chamber control software manipulates circulation fan speeds, chamber vacuum and agent spray times to produce a simulated dynamic cloud within the aerosol test chamber...

Equipment for handling ionization chamber

International Nuclear Information System (INIS)

Altmann, J.

1988-01-01

The device consists of an ionization channel with an ionization chamber, of a support ring, axial and radial bearings, a sleeve, a screw gear and an electric motor. The ionization chamber is freely placed on the bottom of the ionization channel. The bottom part of the channel deviates from the vertical axis. The support ring propped against the axial bearing in the sleeve is firmly fixed to the top part of the ionization channel. The sleeve is fixed to the reactor lid. Its bottom part is provided with a recess for the radial bearing which is propped against a screw wheel firmly connected to the ionization channel. In measuring neutron flux, the screw wheel is rotated by the motor, thus rotating the whole ionization channel such that the ionization chamber is displaced into the reactor core.(J.B.). 1 fig

Weld Development for Aluminum Fission Chamber

Energy Technology Data Exchange (ETDEWEB)

Cross, Carl Edward [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Martinez, Jesse Norris [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-05-16

The Sigma welding team was approached to help fabricate a small fission chamber (roughly ½ inch dia. x ½ inch tall cylinder). These chambers are used as radiation sensors that contain small traces of radionuclides (Cf 252, U 235, and U 238) that serve to ionize gas atoms in addition to external radiation. When a voltage is applied within the chamber, the resulting ion flow can be calibrated and monitored. Aluminum has the advantage of not forming radioactive compounds when exposed to high external radiation (except from minor Na alloy content). Since aluminum has not been used before in this application, this presented an unexplored challenge.

BEBC Big European Bubble Chamber

CERN Multimedia

CERN PhotoLab

1974-01-01

A view of the dismantling of the magnet of BEBC, the 3.7 m European Bubble Chamber : iron magnetic shielding ; lower and upper parts of the vacuum enclosure of the magnet; turbo-molecular vacuum pumps for the "fish-eye" windows; the two superconducting coils; a handling platform; the two cryostats suspended from the bar of the travelling crane which has a 170 ton carrying capacity. The chamber proper, not dismantled, is inside the shielding.

Results from the MAC Vertex chamber

International Nuclear Information System (INIS)

Nelson, H.N.

1987-05-01

The design, construction, and performance characteristics of a high precision gaseous drift chamber made of thin walled proportional tubes are described. The device achieved an average spatial resolution of 45 μm in use for physics analysis with the MAC detector. The B-lifetime result obtained with this chamber is discussed

Measurement and Compensation of BPM Chamber Motion in HLS

Science.gov (United States)

Li, J. W.; Sun, B. G.; Cao, Y.; Xu, H. L.; Lu, P.; Li, C.; Xuan, K.; Wang, J. G.

2010-06-01

Significant horizontal drifts in the beam orbit in the storage ring of HLS (Hefei Light Source) have been seen for many years. What leads to the motion of Beam Position Monitor (BPM) chamber is thermal expansion mainly caused by the synchrotron light. To monitor the BPM chamber motions for all BPMs, a BPM chamber motion measurement system is built in real-time. The raster gauges are used to measure the displacements. The results distinctly show the relation between the BPM chamber motion and the beam current. To suppress the effect of BPM chamber motion, a compensation strategy is implemented at HLS. The horizontal drifts of beam orbit have been really suppressed within 20μm without the compensation of BPM chamber motion in the runtime.

Measurement and Compensation of BPM Chamber Motion in HLS

International Nuclear Information System (INIS)

Li, J. W.; Sun, B. G.; Cao, Y.; Xu, H. L.; Lu, P.; Li, C.; Xuan, K.; Wang, J. G.

2010-01-01

Significant horizontal drifts in the beam orbit in the storage ring of HLS (Hefei Light Source) have been seen for many years. What leads to the motion of Beam Position Monitor (BPM) chamber is thermal expansion mainly caused by the synchrotron light. To monitor the BPM chamber motions for all BPMs, a BPM chamber motion measurement system is built in real-time. The raster gauges are used to measure the displacements. The results distinctly show the relation between the BPM chamber motion and the beam current. To suppress the effect of BPM chamber motion, a compensation strategy is implemented at HLS. The horizontal drifts of beam orbit have been really suppressed within 20μm without the compensation of BPM chamber motion in the runtime.

The thin-wall tube drift chamber operating in vacuum (prototype)

Science.gov (United States)

Alexeev, G. D.; Glonti, L. N.; Kekelidze, V. D.; Malyshev, V. L.; Piskun, A. A.; Potrbenikov, Yu. K.; Rodionov, V. K.; Samsonov, V. A.; Tokmenin, V. V.; Shkarovskiy, S. N.

2013-08-01

The goal of this work was to design drift tubes and a chamber operating in vacuum, and to develop technologies for tubes independent assembly and mounting in the chamber. These design and technology were tested on the prototype. The main features of the chamber are the following: the drift tubes are made of flexible mylar film (wall thickness 36 μm, diameter 9.80 mm, length 2160 mm) using ultrasonic welding along the generatrix; the welding device and methods were developed at JINR. Drift tubes with end plugs, anode wires and spacers were completely assembled outside the chamber. "Self-centering" spacers and bushes were used for precise setting of the anode wires and tubes. The assembled tubes were sealed with O-rings in their seats in the chamber which simplified the chamber assembling. Moreover the tube assembly and the chamber manufacture can be performed independently and in parallel; this sufficiently reduces the total time of chamber manufacture and assembling, its cost and allows tubes to be tested outside the chamber. The technology of independent tube assembling is suitable for a chamber of any shape but a round chamber is preferable for operation in vacuum. Single channel amplifier-discriminator boards which are more stable against cross talks were used for testing the tubes. Independently assembled tubes were mounted into the chamber prototype and its performance characteristic measured under the vacuum conditions. The results showed that both the structure and the tubes themselves normally operate. They are suitable for making a full-scale drift chamber for vacuum.

The thin-wall tube drift chamber operating in vacuum (prototype)

International Nuclear Information System (INIS)

Alexeev, G.D.; Glonti, L.N.; Kekelidze, V.D.; Malyshev, V.L.; Piskun, A.A.; Potrbenikov, Yu.K.; Rodionov, V.K.; Samsonov, V.A.; Tokmenin, V.V.; Shkarovskiy, S.N.

2013-01-01

The goal of this work was to design drift tubes and a chamber operating in vacuum, and to develop technologies for tubes independent assembly and mounting in the chamber. These design and technology were tested on the prototype. The main features of the chamber are the following: the drift tubes are made of flexible mylar film (wall thickness 36 μm, diameter 9.80 mm, length 2160 mm) using ultrasonic welding along the generatrix; the welding device and methods were developed at JINR. Drift tubes with end plugs, anode wires and spacers were completely assembled outside the chamber. “Self-centering” spacers and bushes were used for precise setting of the anode wires and tubes. The assembled tubes were sealed with O-rings in their seats in the chamber which simplified the chamber assembling. Moreover the tube assembly and the chamber manufacture can be performed independently and in parallel; this sufficiently reduces the total time of chamber manufacture and assembling, its cost and allows tubes to be tested outside the chamber. The technology of independent tube assembling is suitable for a chamber of any shape but a round chamber is preferable for operation in vacuum. Single channel amplifier-discriminator boards which are more stable against cross talks were used for testing the tubes. Independently assembled tubes were mounted into the chamber prototype and its performance characteristic measured under the vacuum conditions. The results showed that both the structure and the tubes themselves normally operate. They are suitable for making a full-scale drift chamber for vacuum

The thin-wall tube drift chamber operating in vacuum (prototype)

Energy Technology Data Exchange (ETDEWEB)

Alexeev, G.D. [Joint Institute for Nuclear Research, Dubna (Russian Federation); Glonti, L.N., E-mail: glonti@sunse.jinr.ru [Joint Institute for Nuclear Research, Dubna (Russian Federation); Kekelidze, V.D.; Malyshev, V.L.; Piskun, A.A.; Potrbenikov, Yu.K.; Rodionov, V.K.; Samsonov, V.A.; Tokmenin, V.V.; Shkarovskiy, S.N. [Joint Institute for Nuclear Research, Dubna (Russian Federation)

2013-08-01

The goal of this work was to design drift tubes and a chamber operating in vacuum, and to develop technologies for tubes independent assembly and mounting in the chamber. These design and technology were tested on the prototype. The main features of the chamber are the following: the drift tubes are made of flexible mylar film (wall thickness 36 μm, diameter 9.80 mm, length 2160 mm) using ultrasonic welding along the generatrix; the welding device and methods were developed at JINR. Drift tubes with end plugs, anode wires and spacers were completely assembled outside the chamber. “Self-centering” spacers and bushes were used for precise setting of the anode wires and tubes. The assembled tubes were sealed with O-rings in their seats in the chamber which simplified the chamber assembling. Moreover the tube assembly and the chamber manufacture can be performed independently and in parallel; this sufficiently reduces the total time of chamber manufacture and assembling, its cost and allows tubes to be tested outside the chamber. The technology of independent tube assembling is suitable for a chamber of any shape but a round chamber is preferable for operation in vacuum. Single channel amplifier-discriminator boards which are more stable against cross talks were used for testing the tubes. Independently assembled tubes were mounted into the chamber prototype and its performance characteristic measured under the vacuum conditions. The results showed that both the structure and the tubes themselves normally operate. They are suitable for making a full-scale drift chamber for vacuum.

30 CFR 57.7807 - Flushing the combustion chamber.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Flushing the combustion chamber. 57.7807... and Rotary Jet Piercing Rotary Jet Piercing-Surface Only § 57.7807 Flushing the combustion chamber. The combustion chamber of a jet drill stem which has been sitting unoperated in a drill hole shall be...

Study and analysis of drift chamber parameters

International Nuclear Information System (INIS)

Martinez Laso, L.

1988-01-01

The present work deals mainly with drift chambers. In the first chapter a summary of drift chamber properties is presented. The information has been collected from the extensive bibliography available in this field. A very simple calculation procedure of drift chamber parameters has been developed and is presented in detail in the second chapter. Some prototypes have been made following two geometries (multidrift chamber and Z-chambers). Several installations have been used for test and calibration of these prototypes. A complete description of these installations is given in the third chapter. Cosmic rays, beta particles from a Ru106 radiactive source and a test beam in the WA (West Area) of SPS at CERN have been used for experimental purposes. The analysis and the results are described for the different setups. The experimental measurements have been used to produce a complete cell parametrization (position as function of drift time) and to obtain spatial resolution values (in the range of 200-250 um). Experimental results are in good agreement with numerical calculations. (Author)

Tuned Chamber Core Panel Acoustic Test Results

Science.gov (United States)

Schiller, Noah H.; Allen, Albert R.

2016-01-01

This report documents acoustic testing of tuned chamber core panels, which can be used to supplement the low-frequency performance of conventional acoustic treatment. The tuned chamber core concept incorporates low-frequency noise control directly within the primary structure and is applicable to sandwich constructions with a directional core, including corrugated-, truss-, and fluted-core designs. These types of sandwich structures have long, hollow channels (or chambers) in the core. By adding small holes through one of the facesheets, the hollow chambers can be utilized as an array of low-frequency acoustic resonators. These resonators can then be used to attenuate low-frequency noise (below 400 Hz) inside a vehicle compartment without increasing the weight or size of the structure. The results of this test program demonstrate that the tuned chamber core concept is effective when used in isolation or combined with acoustic foam treatments. Specifically, an array of acoustic resonators integrated within the core of the panels was shown to improve both the low-frequency absorption and transmission loss of the structure in targeted one-third octave bands.

A plant chamber system with downstream reaction chamber to study the effects of pollution on biogenic emissions

NARCIS (Netherlands)

Timovsky, J.; Gankema, Paulien; Pierik, Ronald; Holzinger, Rupert

2014-01-01

A system of two plant chambers and a downstream reaction chamber has been set up to investigate the emission of biogenic volatile organic compounds (BVOCs) and possible effects of pollutants such as ozone. The system can be used to compare BVOC emissions from two sets of differently treated plants,

RF Anechoic Chambers, Tri-Service Research Laboratory

Data.gov (United States)

Federal Laboratory Consortium — In collaboration with the Navy, there are 12 RF Anechoic and static free exposure chambers located at TSRL. These chambers cover the majority of the RF spectrum and...

System of multiwire proportional chambers at the separated particle channel for the Mirabelle bubble chamber

International Nuclear Information System (INIS)

Bryukhanov, N.S.; Galyaev, N.A.; Kotov, V.I.; Prosin, B.V.; Romanov, Yu.A.; Khodyrev, Yu.S.

1980-01-01

A system of multiwire proportional chambers (MPC) operating on-line with a M-6000 computer used during tuning and monitoring of beam parameters in a separated particle channel for the Mirabelle bubble chamber is described. Peculiarities of the construction and main characteristics of two MPC versions are considered. The first version is intended for placing in a vacuum at the edges of high-frequency separator deflector, the second one - for placing outside a vacuum in ionoguide gaps. Power supply of the proportional chambers is carried out from local compact (160x95x50 mm) high-voltage sources remotely controlled from a channel panel by low voltage. A MPC position diagram in the accelerator channel, flowsheet of registering electronics for the MPC system, main circuits of high-voltage power source, analog-to-digital converter of a code and trunk amplifier are given. A graph of amplifier signal amplitude dependence on high voltage of a chamber for a different composition of a gaseous mixture is presented. It is noted that the used elements of the electronic system provide the reliable processing of data and its transmission for a great distance (approximately 400 m). It is underlined that the MPC system operation for a long time has shown its high efficiency and reliability

Monte Carlo modeling of ion chamber performance using MCNP.

Science.gov (United States)

Wallace, J D

2012-12-01

Ion Chambers have a generally flat energy response with some deviations at very low (2 MeV) energies. Some improvements in the low energy response can be achieved through use of high atomic number gases, such as argon and xenon, and higher chamber pressures. This work looks at the energy response of high pressure xenon-filled ion chambers using the MCNP Monte Carlo package to develop geometric models of a commercially available high pressure ion chamber (HPIC). The use of the F6 tally as an estimator of the energy deposited in a region of interest per unit mass, and the underlying assumptions associated with its use are described. The effect of gas composition, chamber gas pressure, chamber wall thickness, and chamber holder wall thicknesses on energy response are investigated and reported. The predicted energy response curve for the HPIC was found to be similar to that reported by other investigators. These investigations indicate that improvements to flatten the overall energy response of the HPIC down to 70 keV could be achieved through use of 3 mm-thick stainless steel walls for the ion chamber.

Construction of a full-length prototype of the BESIII drift chamber and on-detector test for the BESIII drift chamber electronics

International Nuclear Information System (INIS)

Qin Zhonghua; Wu Linghui; Liu Jianbei; Chinese Academy of Sciences, Beijing; Yan Zhikang; Hunan Univ., Changsha; Chen Yuanbo; Chen Chang; Xu Meihang; Wang Lan; Ma Xiaoyan; Jin Yan; Liu Rongguang; Tang Xiao; Zhang Guifang; Zhu Qiming; Sheng Huayi; Zhu Kejun

2007-01-01

A full-length prototype of the BESIII drift chamber was built. The experience gained on gas sealing, high voltage supply and front-end electronics installation should be greatly beneficial to the successful construction of the BESIII drift chamber. An on-detector test of the BESIII drift chamber electronics was carried out with the constructed prototype chamber. The noise performance, drift time and charge measurements, and electronics gains were examined specifically. The final test results indicate that the electronics have a good performance and can satisfy their design requirements. (authors)

Final report for NIF chamber dynamics studies

International Nuclear Information System (INIS)

Burnham, A; Peterson, P F; Scott, J M

1998-01-01

The National Ignition Facility (NIF), a 1.8 MJ, 192 laser beam facility, will have anticipated fusion yields of up to 20 MJ from D-T pellets encased in a gold hohlraum target. The energy emitted from the target in the form of x rays, neutrons, target debris kinetic energy, and target shrapnel will be contained in a 5 m. radius spherical target chamber. various diagnostics will be stationed around the target at varying distances from the target. During each shot, the target will emit x rays that will vaporize nearby target facing surfaces including those of the diagnostics, the target positioner, and other chamber structures. This ablated vapor will be transported throughout the chamber, and will eventually condense and deposit on surfaces in the chamber, including the final optics debris shields. The research at the University of California at Berkeley relates primarily to the NIF chamber dynamics. The key design issues are the ablation of the chamber structures, transport of the vapor through the chamber and the condensation or deposition processes of those vaporized materials. An understanding of these processes is essential in developing a concept for protecting the fina optics debris shields from an excessive coating (> 10 A) of target debris and ablated material, thereby prolonging their lifetime between change-outs. At Berkeley, we have studied the physical issues of the ablation process and the effects of varying materials, the condensation process of the vaporized material, and design schemes that can lower the threat posed to the debris shields by these processes. The work or portions of the work completed this year have been published in several papers and a dissertation [l-5

MIMO OTA Testing in Small Multi-Probe Anechoic Chamber Setups

DEFF Research Database (Denmark)

Llorente, Ines Carton; Fan, Wei; Pedersen, Gert F.

2016-01-01

OTA testing of MIMO capable terminals is often performed in large anechoic chambers, where planar waves impinging the test area are assumed. Furthermore, reflections from the chamber, and probe coupling are often considered negligible due to the large dimensions of the chamber. This paper...... investigates the feasibility of reducing the physical dimension of 2D multi-probe anechoic chamber setups for MIMO OTA testing, with the purpose of reducing the cost and space of the setup. In the paper, a channel emulation algorithm and chamber compensation technique are proposed for MIMO OTA testing in small...... anechoic chambers. The performance deterioration in a small anechoic chamber, i.e., with a ring radius of 0.5 m, is demonstrated via simulations....

Omaeluloolisus eesti teatris: Merle Karusoo lavastustest. Life Narratives and Estonian Theatre: The Productions of Merle Karusoo

Directory of Open Access Journals (Sweden)

Piret Kruuspere

2012-04-01

Full Text Available Any consideration of Estonian theatre from the point of view of biographical theatre needs to include the work of playwright and director Merle Karusoo. Productions based on various life narratives (diaries, letters, biographical interviews form the core of her work that can be defined as biographical or memory theatre. Her work has also been viewed within the context of community theatre or political theatre; Karusoo has herself referred to her work as sociological theatre. Life narratives have functioned in Karusoo’s productions as the basis for restoring oppressed or denied collective discourses of memory. Her productions emerged within the framework of the more general process of restoration of historical heritage and the rehabilitation of collective memory at the end of the 1980s and the beginning of the 1990s. Life story can be viewed as the essence of Merle Karusoo’s theatre. The personal in the life story in the production activates the emotional memory of the audience; for older generations such theatre facilitates a legitimisation of remembering one’s life story in entirety, and for younger generations it functions as a vehicle of collective, historical and national memory. The current article outlines the main stages of Karusoo’s biographical theatre, highlights major productions of each stage and provides an overview of their reception. Karusoo’s theatre dates back to 1980s. Productions based on life stories of the generations born in 1950s and 1960s, Meie elulood (Our Biographies and Kui ruumid on täis ... (Full Rooms both in 1982, mediated fragments of life stories of 16 drama students, focusing on the processes of self-conception and -reflection of young persons. In the context of the Soviet regime that exerted firm ideological control over the private lives of its citizens, Karusoo’s productions struck an especially powerful and unusual chord. Karusoo’s biographical theatre has gathered momentum and assumed a more

Proportional chambers and multiwire drift chambers at high rates

International Nuclear Information System (INIS)

Walenta, A.H.

1977-01-01

The high event and particle rates expected for ISABELLE intersecting storage rings raise the question whether PWC's and drift chambers, now widely in use in experiments, still can operate under such conditions. Various effects depend on the number of avalanches produced per length of wire N and the size of the avalanche Q, i.e., on the number of positive ions created in an avalanche. Therefore the important parameter for the following discussion is the product QN. The minimum Q is determined by the type and noise level of preamplifiers used. Examples are given for a typical low noise amplifier as well as for a typical integrated ''cheap'' amplifier. The rate/wire length N depends on the chamber arrangement, wire spacing, etc. In multiwire drift chambers, a single wire shows space-charge effects reducing the pulse height by 1% at a rate of N = 7 x 10 3 mm -1 sec -1 . At a rate of N approximately equal to 10 5 mm -1 sec -1 an efficiency loss of the order of 1% was noticed. The aging effect due to deposits on the anode wire can be reduced using low noise amplifiers and low gas gain to such an extent that a lifetime of about half a year at ISABELLE can be expected. The use of conventional cheap preamplifiers will result in a typical lifetime of about 30 days. Improvements are probable. The time resolution of Δt/sub r/ = 4 nsec fwhm seems adequate for event rates of 10 7 sec -1 . The memory time Δt/sub m/ greater than or equal to 100 nsec may cause serious problems for pattern recognition depending on layout and readout. The use of induced signals on cathode pads, thus reading out shorter parts of the wire, can solve the problem

Track photographing in 8-m streamer chamber

International Nuclear Information System (INIS)

Anisimova, N.Z.; Davidenko, V.A.; Kantserov, V.A.; Rybakov, V.G.; Somov, S.V.

1981-01-01

A system for obtaining data from a streamer chamber intended for measuring muon polarization is described. An optical scheme for photographing of tracks in the chamber is given. The photographing process is complicated at the expense of large dimensions and module structure of the chamber as well as due to insufficient for direct photographing brightness of streamers. The system described was tested during a long time in a physical experiment. More than 100 thousand photos have been taken by its means [ru

Calibration of working standard ionization chambers and dose standardization

International Nuclear Information System (INIS)

Abd Elmahoud, A. A. B.

2011-01-01

Measurements were performed for the calibration of two working standard ionization chambers in the secondary standard dosimetry laboratory of Sudan. 600 cc cylindrical former type and 1800 cc cylindrical radical radiation protection level ionization chambers were calibrated against 1000 cc spherical reference standard ionization chamber. The chamber were calibrated at X-ray narrow spectrum series with beam energies ranged from (33-116 KeV) in addition to 1''3''7''Cs beam with 662 KeV energy. The chambers 0.6 cc and 0.3 cc therapy level ionization were used for dose standardization and beam output calibrations of cobalt-60 radiotherapy machine located at the National Cancer Institute, University of Gazira. Concerning beam output measurements for 6''0''Co radiotherapy machine, dosimetric measurements were performed in accordance with the relevant per IAEA dosimetry protocols TRS-277 and TRS-398. The kinetic energy released per unit mass in air (air kerma) were obtained by multiplying the corrected electrometer reading (nC/min) by the calibration factors (Gy/n C) of the chambers from given in the calibration certificate. The uncertainty of measurements of air kerma were calculated for the all ionization chambers (combined uncertainty) the calibration factors of these ionization chambers then were calculated by comparing the reading of air kerma of secondary standard ionization chambers to than from radical and farmer chambers. The result of calibration working standard ionization chambers showed different calibration factors ranged from 0.99 to 1.52 for different radiation energies and these differences were due to chambers response and specification. The absorbed dose to to water calculated for therapy ionization chamber using two code of practice TRS-277 and TRS-398 as beam output for 6''0''Co radiotherapy machine and it can be used as a reference for future beam output calibration in radiotherapy dosimetry. The measurement of absorbed dose to water showed that the

Measuring the sensitivity of a boron-lined ion chamber

International Nuclear Information System (INIS)

Barton, D.M.

1992-03-01

Boron-lined ion chambers are used to monitor external neutron flux from fissionable materials assembled at the Los Alamos Critical Assembly Experiment Facility. The sensitivity of these chambers must be measured periodically in order to detect changes in filling gas and to evaluate other factors that may affect chamber performance. We delineate a procedure to measure ion chamber response using a particular neutron source ( 239 PuBe) in a particular moderating geometry of polyethylene. We also discuss use of the amplifier, high-voltage power supply, recorders, and scram circuits that comprise the complete ion chamber monitoring system

GBO RF Anechoic Chamber & Antenna Test Range

Data.gov (United States)

Federal Laboratory Consortium — A shielded anechoic chamber measuring 15 by 15 by 37 feet is located in the Jansky Laboratory at Green Bank. This chamber has been outfitted as a far-field antenna...

Safety shield for vacuum/pressure-chamber windows

Science.gov (United States)

Shimansky, R. A.; Spencer, R.

1980-01-01

Optically-clear shatter-resistant safety shield protects workers from implosion and explosion of vacuum and pressure windows. Plastic shield is inexpensive and may be added to vacuum chambers, pressure chambers, and gas-filling systems.

Developing Cloud Chambers with High School Students

Science.gov (United States)

Ishizuka, Ryo; Tan, Nobuaki; Sato, Shoma; Zeze, Syoji

The result and outcome of the cloud chamber project, which aims to develop a cloud chamber useful for science education is reported in detail. A project includes both three high school students and a teacher as a part of Super Science High School (SSH) program in our school. We develop a dry-ice-free cloud chamber using salt and ice (or snow). Technical details of the chamber are described. We also argue how the project have affected student's cognition, motivation, academic skills and behavior. The research project has taken steps of professional researchers, i.e., in planning research, applying fund, writing a paper and giving a talk in conferences. From interviews with students, we have learnt that such style of scientific activity is very effective in promoting student's motivation for learning science.

The Impedance of Multi-layer Vacuum Chambers

CERN Document Server

Vos, L

2003-01-01

Many components of the LHC vacuum chamber have multi-layered walls : the copper coated cold beam screen, the titanium coated ceramic chamber of the dump kickers, the ceramic chamber of the injection kickers coated with copper stripes, only to name a few. Theories and computer programs are available for some time already to evaluate the impedance of these elements. Nevertheless, the algorithm developed in this paper is more convenient in its application and has been used extensively in the design phase of multi-layer LHC vacuum chamber elements. It is based on classical transmission line theory. Closed expressions are derived for simple layer configurations, while beam pipes involving many layers demand a chain calculation. The algorithm has been tested with a number of published examples and was verified with experimental data as well.

Hydrostatic Hyperbaric Chamber Ventilation System

Science.gov (United States)

Sarguisingh, Miriam J.

2012-01-01

The hydrostatic hyperbaric chamber (HHC) represents the merger of several technologies in development for NASA aerospace applications, harnessed to directly benefit global health. NASA has significant experience developing composite hyperbaric chambers for a variety of applications. NASA also has researched the application of water-filled vessels to increase tolerance of acceleration forces. The combination of these two applications has resulted in the hydrostatic chamber, which has been conceived as a safe, affordable means of making hyperbaric oxygen therapy (HBOT) available in the developing world for the treatment of a variety of medical conditions. Specifically, HBOT is highly-desired as a possibly curative treatment for Buruli Ulcer, an infectious condition that afflicts children in sub-Saharan Africa. HBOT is simply too expensive and too dangerous to implement in the developing world using standard equipment. The HHC technology changes the paradigm. The HHC differs from standard hyperbaric chambers in that the majority of its volume is filled with water which is pressurized by oxygen being supplied in the portion of the chamber containing the patient s head. This greatly reduces the amount of oxygen required to sustain a hyperbaric atmosphere, thereby making the system more safe and economical to operate. An effort was taken to develop an HHC system to apply HBOT to children that is simple and robust enough to support transport, assembly, maintenance and operation in developing countries. This paper details the concept for an HHC ventilation and pressurization system to provide controlled pressurization and adequate washout of carbon dioxide while the subject is enclosed in the confined space during the administration of the medical treatment. The concept took into consideration operational complexity, safety to the patient and operating personnel, and physiological considerations. The simple schematic, comprised of easily acquired commercial hardware

Laboratory implantation for well type ionization chambers calibration

International Nuclear Information System (INIS)

Vianello, E.A.; Dias, D.J.; Almeida, C.E. de

1998-01-01

The Radiological Science Laboratory is implanting a service for calibration of well type chambers by IAEA training program. The kerma rate in the air (mu Gy/h) of the linear Cs-137 reference source CDCS-J4 have been determined using a well type chamber Standard Imaging HDR-1000 model, which have been calibrated at Secondary Standard Laboratory Calibration of IAEA, whereas two HDR-1000 Plus chambers were calibrated too, following the same standards. The results were compared with Wisconsin University calibration certification and has demonstrated that well type ionization chamber calibration can be used in brachytherapy for several kinds of radionuclides. (Author)

Shock tubes: compressions in the low pressure chamber

International Nuclear Information System (INIS)

Schins, H.; Giuliani, S.

1986-01-01

The gas shock tube used in these experiments consists of a low pressure chamber and a high pressure chamber, divided by a metal-diaphragm-to-rupture. In contrast to the shock mode of operation, where incident and reflected shocks in the low pressure chamber are studied which occur within 3.5 ms, in this work the compression mode of operation was studied, whose maxima occur (in the low pressure chamber) about 9 ms after rupture. Theoretical analysis was done with the finite element computer code EURDYN-1M, where the computation was carried out to 30 ms

Simple structure diffusion cloud chamber for educational purpose

International Nuclear Information System (INIS)

Hrehuss, Gy.; Molnar, B.

1982-01-01

A simple structure diffusion cloud chamber was designed and built with educational aim. The source of alpha particles is Am-241 radioisotope smeared on steel foil, the source of vapor is a felt disc saturated with methanol. Five minutes after covering the chamber the system achieves the thermodynamic equilibrium and alpha particle tracks of 5 cm length become visible in the centre of the chamber. Life-time of a track is about 0.5-1 second, the frequency is 2-3 tracks/s. The presented diffusion chamber can be built simply and easily, using cheap common materials and components. (D.Gy.)

Effects of air humidity on ionization chamber response

International Nuclear Information System (INIS)

Meger, C.; DeLuca, P.M. Jr.; Pearson, D.W.; Venci, R.

1983-01-01

A study of the effect of air humidity on four different ionization chamber cap materials verified earlier studies (Kristensen and Sundbom, 1981; Mijnheer et al., 1983) and extended our understanding of the problem. We found nylon and A-150 plastic caps swell as they absorb water from the air. This accounts for as much as 2.5% increase in ionization response. Graphite chambers readily absorb and desorb water from the air. This creates a problem in maintaining dry air in a wet graphite chamber. Humid air has a different density and W value than dry air (Niatel, 1969, 1975). This decreases the charge collected in a wet graphite chamber. We observe a decrease in response of approximately 2%, a value greater than can be accounted for by these effects alone. Polyethylene chambers are unaffected by humid air. 4 refs., 9 figs

Charpak hemispherical wire chamber

CERN Multimedia

1970-01-01

pieces. Mesures are of the largest one. Multi-wire detectors contain layers of positively and negatively charged wires enclosed in a chamber full of gas. A charged particle passing through the chamber knocks negatively charged electrons out of atoms in the gas, leaving behind positive ions. The electrons are pulled towards the positively charged wires. They collide with other atoms on the way, producing an avalanche of electrons and ions. The movement of these electrons and ions induces an electric pulse in the wires which is collected by fast electronics. The size of the pulse is proportional to the energy loss of the original particle.

Cloud chamber photographs of the cosmic radiation

CERN Document Server

Rochester, George Dixon

1952-01-01

Cloud Chamber Photographs of the Cosmic Radiation focuses on cloud chamber and photographic emulsion wherein the tracks of individual subatomic particles of high energy are studied. The publication first offers information on the technical features of operation and electrons and cascade showers. Discussions focus on the relationship in time and space of counter-controlled tracks; techniques of internal control of the cloud chamber; cascade processes with artificially-produced electrons and photons; and nuclear interaction associated with an extensive shower. The manuscript then elaborates on

"Flat-Fish" vacuum chamber for the ISR

CERN Multimedia

CERN PhotoLab

1983-01-01

The "Flat-Fish" vacuum chamber was a very special one for the ISR beam intersection I-4, inside the Split-Field Magnet. Technical descriptions are given with pictures 7802042 and 7712182. There were several generations of this chamber. This picture was taken during the last year of ISR operation. See also 7510230X, 7511123X, 7802039, 7802041. A flat-fish type vacuum chamber was also used at I-8, inside the Open Axial Field Magnet (OAFM, experiment 807 on large transverse momentum collision products), see 7901358.

Growing and Analyzing Biofilms in Flow Chambers

DEFF Research Database (Denmark)

Tolker-Nielsen, Tim; Sternberg, Claus

2011-01-01

This unit describes the setup of flow chamber systems for the study of microbial biofilms, and methods for the analysis of structural biofilm formation. Use of flow chambers allows direct microscopic investigation of biofilm formation. The biofilms in flow chambers develop under hydrodynamic......, and disassembly and cleaning of the system. In addition, embedding and fluorescent in situ hybridization of flow chamber–grown biofilms are addressed. Curr. Protoc. Microbiol. 21:1B.2.1-1B.2.17. © 2011 by John Wiley & Sons, Inc....

Ballistic-neutralized chamber transport of intense heavy ion beams

International Nuclear Information System (INIS)

Rose, D.V.; Welch, D.R.; Oliver, B.V.; Clark, R.E.; Sharp, W.M.; Friedman, A.

2001-01-01

Two-dimensional particle-in-cell simulations of intense heavy ion beams propagating in an inertial confinement fusion (ICF) reactor chamber are presented. The ballistic-neutralized transport scheme studied uses 4 GeV Pb +1 ion beams injected into a low-density, gas-filled reactor chamber and the beam is ballistically focused onto an ICF target before entering the chamber. Charge and current neutralization of the beam is provided by the low-density background gas. The ballistic-neutralized simulations include stripping of the beam ions as the beam traverses the chamber as well as ionization of the background plasma. In addition, a series of simulations are presented that explore the charge and current neutralization of the ion beam in an evacuated chamber. For this vacuum transport mode, neutralizing electrons are only drawn from sources near the chamber entrance

A Customizable Chamber for Measuring Cell Migration.

Science.gov (United States)

Chowdhury, Aniqa N; Vo, Huu Tri; Olang, Sharon; Mappus, Elliott; Peterson, Brian; Hlavac, Nora; Harvey, Tyler; Dean, Delphine

2017-03-12

Cell migration is a vital part of immune responses, growth, and wound healing. Cell migration is a complex process that involves interactions between cells, the extracellular matrix, and soluble and non-soluble chemical factors (e.g., chemoattractants). Standard methods for measuring the migration of cells, such as the Boyden chamber assay, work by counting cells on either side of a divider. These techniques are easy to use; however, they offer little geometric modification for different applications. In contrast, microfluidic devices can be used to observe cell migration with customizable concentration gradients of soluble factors 1 , 2 . However, methods for making microfluidics based assays can be difficult to learn. Here, we describe an easy method for creating cell culture chambers to measure cell migration in response to chemical concentration gradients. Our cell migration chamber method can create different linear concentration gradients in order to study cell migration for a variety of applications. This method is relatively easy to use and is typically performed by undergraduate students. The microchannel chamber was created by placing an acrylic insert in the shape of the final microchannel chamber well into a Petri dish. After this, poly(dimethylsiloxane) (PDMS) was poured on top of the insert. The PDMS was allowed to harden and then the insert was removed. This allowed for the creation of wells in any desired shape or size. Cells may be subsequently added to the microchannel chamber, and soluble agents can be added to one of the wells by soaking an agarose block in the desired agent. The agarose block is added to one of the wells, and time-lapse images can be taken of the microchannel chamber in order to quantify cell migration. Variations to this method can be made for a given application, making this method highly customizable.

Test chamber for alpha spectrometry

Science.gov (United States)

Larsen, Robert P.

1977-01-01

Alpha emitters for low-level radiochemical analysis by measurement of alpha spectra are positioned precisely with respect to the location of a surface-barrier detector by means of a chamber having a removable threaded planchet holder. A pedestal on the planchet holder holds a specimen in fixed engagement close to the detector. Insertion of the planchet holder establishes an O-ring seal that permits the chamber to be pumped to a desired vacuum. The detector is protected against accidental contact and resulting damage.

Upgrades of the ATLAS Muon Spectrometer with sMDT Chambers

CERN Document Server

Ferretti, Claudio; The ATLAS collaboration

2015-01-01

With half the drift-tube diameter of the Monitored Drift Tube (MDT) chambers of the ATLAS muon spectrometer and otherwise unchanged operating parameters, small-diameter Muon Drift Tube (sMDT) chambers provide an order of magnitude higher rate capability and can be installed in detector regions where MDT chambers do not fit. The chamber assembly time has been reduced by a factor of seven to one working day and the sense wire positioning accuracy improved by a factor of two to better than ten microns. Two sMDT chambers have been installed in ATLAS in 2014 to improve the momentum resolution in the barrel part of the spectrometer. The construction of additional twelve chambers covering the feet regions of the ATLAS detector has started. It will be followed by the replacement of the MDT chambers at the ends of the barrel inner layer by sMDTs improving the Performance at the high expected background rates and providing space for additional RPC trigger chambers.

Upgrades of the ATLAS Muon Spectrometer with sMDT Chambers

CERN Document Server

Ferretti, C

2016-01-01

With half the drift-tube diameter of the Monitored Drift Tube (MDT) chambers of the ATLAS muon spectrometer and otherwise unchanged operating parameters, small-diameter Muon Drift Tube (sMDT) chambers provide an order of magnitude higher rate capability and can be installed in detector regions where MDT chambers do not fit. The chamber assembly time has been reduced by a factor of seven to one working day and the sense wire positioning accuracy improved by a factor of two to better than ten microns. Two sMDT chambers have been installed in ATLAS in 2014 to improve the momentum resolution in the barrel part of the spectrometer. The construction of an additional twelve chambers covering the feet regions of the ATLAS detector has started. It will be followed by the replacement of the MDT chambers at the ends of the barrel inner layer by sMDTs improving the Performance at the high expected background rates and providing space for additional RPC trigger chambers.

Upgrades Of The ATLAS Muon Spectrometer With sMDT Chambers

CERN Document Server

Ferretti, Claudio; The ATLAS collaboration

2015-01-01

The Monitored Drift Tube (MDT) chambers of the ATLAS muon spectrometer demonstrated that they provide very precise and robust tracking over large areas. Goals of ATLAS muon detector upgrades are to increase the acceptance for precision muon momentum measurement and triggering and to improve the rate capability of the muon chambers in the high-background regions when the LHC luminosity increases. Small-diameter Muon Drift Tube (sMDT) chambers have been developed for these purposes. With half the drift-tube diameter of the MDT chambers and otherwise unchanged operating parameters, sMDT chambers share the advantages with the MDTs, but have more than ten times higher rate capability and can be installed in detector regions where MDT chambers do not fit in. The chamber assembly methods have been optimized for mass production, reducing cost and construction time considerably and improving the sense wire positioning accuracy to better than ten microns. Two sMDT chambers have been installed in 2014 to improve the mom...

Utilizing Chamber Data for Developing and Validating Climate Change Models

Science.gov (United States)

Monje, Oscar

2012-01-01

Controlled environment chambers (e.g. growth chambers, SPAR chambers, or open-top chambers) are useful for measuring plant ecosystem responses to climatic variables and CO2 that affect plant water relations. However, data from chambers was found to overestimate responses of C fluxes to CO2 enrichment. Chamber data may be confounded by numerous artifacts (e.g. sidelighting, edge effects, increased temperature and VPD, etc) and this limits what can be measured accurately. Chambers can be used to measure canopy level energy balance under controlled conditions and plant transpiration responses to CO2 concentration can be elucidated. However, these measurements cannot be used directly in model development or validation. The response of stomatal conductance to CO2 will be the same as in the field, but the measured response must be recalculated in such a manner to account for differences in aerodynamic conductance, temperature and VPD between the chamber and the field.

Irradiation chamber for photoactivation patient treatment system

International Nuclear Information System (INIS)

Lee, K.H.; Troutner, V.H.; Goss, J.; King, M.J.

1988-01-01

A flat plate irradiation chamber is described for use in a patient treatment system for altering cells, including treating the cells with a photoactivatable agent and passing the cells and the agent through a field of photoactivating radiation whereby the agent is caused to be activated and to affect the cells. The agent and the cells are contained in the irradiation chamber during irradiation. The flat plate irradiation chamber comprises: a rigid top sheet matably joined with a rigid bottom sheet, forming therebetween a rigid serpentine pathway for conducting the cells through the field of radiation; and pump block means for holding tubing means in fluid communication with the serpentine pathway and adapted for engaging a peristaltic pump whereby rotation of the pump causes the cells to flow through the serpentine pathway, and wherein the chamber is removable from the system and disposable

HYLIFE-II reactor chamber mechanical design: Update

International Nuclear Information System (INIS)

House, P.A.

1992-01-01

Mechanical design features of the reactor chamber for the HYLIFE-II inertial confinement fusion power plant are presented. A combination of oscillating and steady, molten salt streams (Li 2 BeF 4 ) are used for shielding and blast protection of the chamber walls. The system is designed for a 6 Hz repetition rate. Beam path clearing, between shots, is accomplished with the oscillating flow. The mechanism for generating the oscillating streams is described. A design configuration of the vessel wall allows adequate cooling and provides extra shielding to reduce thermal stresses to tolerable levels. The bottom portion of the reactor chamber is designed to minimize splash back of the high velocity (17 m/s) salt streams and also recover up to half of the dynamic head. Cost estimates for a 1 GW e and 2 GW e reactor chamber are presented

Ultrasonic cleaning of electrodes of wire chambers

International Nuclear Information System (INIS)

Krasnov, V.A.; Kurepin, A.B.; Razin, V.I.

1980-01-01

A technological process of cleaning electrodes and working volume surfaces of wire chambers from contaminations by the simultaneous mechanical action of the energy of ultrasonic oscillations and the chemical action of detergents is discussed. A device for cleaning wire electrodes of proportional chambers of 0.3x0.4 m is described. The device uses two ultrasonic generators with a total power of 0.5 kW. As a detergent use is made of a mixture of ethyl alcohol, gasoline and freon. In the process of cleaning production defects can be detected in the wire chambers which makes it possible to timely remove the defects. Measurements of the surface resistance of fiberglass laminate of printed drift chamber electrodes at a voltage of 2 kV showed that after completing the cleaning process the resistance increases 15-20%

High-vacuum chamber for the irradiation of targets

International Nuclear Information System (INIS)

Krimmel, E.; Dullnig, H.

1975-01-01

The high vacuum chamber for irradiating targets with X-rays, electron or ion beams is connected to a magazine storage vessel for the targets through a loading duct which can be evacuated. This duct is traversed by a carriage transporting a magazine to the irradiation position. The duct can be closed by a closing valve. Inside the chamber there is a grip attached to a swivel arm which takes a frame with a target from the magazine, or vice versa, and moves it into the irradiation position. This means that the chamber must always be kept at a constant internal pressure. The swiveling shaft for the swivel arm and the transport pinion of the carriage in addition are magnetically coupled to drive shafts located outside the chamber, which obviates the need for any seals. The grip may also deposit the frame on a goniometer, which allows the target to be aligned in the irradiation position. In addition, the measuring probes used to record the amount of reflected radiation are installed in the chamber under electrically insulated conditions relative to the chamber. (DG/RF) [de

Multi-chamber nucleic acid amplification and detection device

Science.gov (United States)

Dugan, Lawrence

2017-10-25

A nucleic acid amplification and detection device includes an amplification cartridge with a plurality of reaction chambers for containing an amplification reagent and a visual detection reagent, and a plurality of optically transparent view ports for viewing inside the reaction chambers. The cartridge also includes a sample receiving port which is adapted to receive a fluid sample and fluidically connected to distribute the fluid sample to the reaction chamber, and in one embodiment, a plunger is carried by the cartridge for occluding fluidic communication to the reaction chambers. The device also includes a heating apparatus having a heating element which is activated by controller to generate heat when a trigger event is detected. The heating apparatus includes a cartridge-mounting section which positioned a cartridge in thermal communication with the heating element so that visual changes to the contents of the reaction chambers are viewable through the view ports.

One cubic metre NIST traceable radon test chamber

International Nuclear Information System (INIS)

Kotrappa, P.; Stieff, F.

2008-01-01

With the availability of the National Inst. of Standards and Technology (NIST) Radon Emanation Standard with a content of ∼5000 Bq of 226 Ra, it is possible to build a flow through a practical radon test chamber. A standard glove box with four gloves and a transfer port is used. Air is pumped through a flow integrator, water jar for humidification and NIST source holder, and into the glove box through a manifold. A derived theoretical expression provides the calculated radon concentration inside the chamber. The calculation includes a derived decay correction due to the large volume and low flow rate of the system. Several calibrated continuous radon monitors and passive integrating electret ion chambers tested in the chamber agreed fairly well with the calculated radon concentrations. The chamber is suitable for handling the calibration of several detectors at the same time. (authors)

Medtner: Konzert für Klavier und Orchester Nr. 1 c-Moll op. 33 / Volkmar Fischer

Index Scriptorium Estoniae

Fischer, Volkmar

1992-01-01

Uuest heliplaadist "Medtner: Konzert für Klavier und Orchester Nr. 1 c-Moll op. 33, Sonaten-Ballade für Klavier Fis-Dur op. 27. London Philharmonic Orchestra / Neeme Järvi". Chandos/Koch CD9039 (WD:54'28")

General purpose nuclear irradiation chamber

International Nuclear Information System (INIS)

Nurul Fadzlin Hasbullah; Nuurul Iffah Che Omar; Nahrul Khair Alang Md Rashid; Jaafar Abdullah

2013-01-01

Nuclear technology has found a great need for use in medicine, industry, and research. Smoke detectors in our homes, medical treatments and new varieties of plants by irradiating its seeds are just a few examples of the benefits of nuclear technology. Portable neutron source such as Californium-252, available at Industrial Technology Division (BTI/ PAT), Malaysian Nuclear Agency, has a 2.645 year half-life. However, 252 Cf is known to emit gamma radiation from the source. Thus, this chamber aims to provide a proper gamma shielding for samples to distinguish the use of mixed neutron with gamma-rays or pure neutron radiation. The chamber is compatible to be used with other portable neutron sources such as 241 Am-Be as well as the reactor TRIGA PUSPATI for higher neutron dose. This chamber was designed through a collaborative effort of Kulliyyah Engineering, IIUM with the Industrial Technology Division (BTI) team, Malaysian Nuclear Agency. (Author)

Rapid-Cycling Bubble-Chamber, details

CERN Multimedia

CERN PhotoLab

1980-01-01

Parts of the hydraulic expansion system of the Rapid-Cycling Bubble-Chamber (RCBC). RCBC was the largest of 3 rapid-cycling bubble-chambers (the others were LEBC and HOLEBC), used as target- and vertex-detectors within the European Hybrid Spectrometer (EHS) in the SPS North Area (EHN1). RCBC contained 250 l of liquid hydrogen and was located inside a 3 T superconducting magnet. It was designed for 30 expansions/s (100 times faster than BEBC), the system shown here allowed 50 expansions/s. RCBC operated from 1981 to 1983 for experiments NA21, NA22 and NA23 at a rate of 15 expansions/s, clocking up a total of over 4 million. In the rear, at left, is bearded Lucien Veillet; Augustin Didona is at the right. See also 8001009. The installation of the piston assembly in the RCBC chamber body is shown in the Annual Report 1980, p.65.

Holography in small bubble chambers

International Nuclear Information System (INIS)

Lecoq, P.

1984-01-01

This chapter reports on an experiment to determine the total charm cross section at different incident momenta using the small, heavy liquid bubble chamber HOBC. Holography in liquid hydrogen is also tested using the holographic lexan bubble chamber HOLEBC with the aim of preparing a future holographic experiment in hydrogen. The high intensity tests show that more than 100 incident tracks per hologram do not cause a dramatic effect on the picture quality. Hydrogen is more favorable than freon as the bubble growth is much slower in hydrogen. An advantage of holography is to have the maximum resolution in the full volume of the bubble chamber, which allows a gain in sensitivity by a factor of 10 compared to classical optics as 100 tracks per hologram look reasonable. Holograms are not more difficult to analyze than classical optics high-resolution pictures. The results show that holography is a very powerful technique which can be used in very high resolution particle physics experiments

Reconstruction of data in low-mass magnetostrictive chambers

International Nuclear Information System (INIS)

Daley, H.M.

1983-01-01

The reconstruction of spark positions in a set of low-mass spark chambers with remote magnetostrictive readout, used in a study of the reaction π - p → K 0 Λ, is described. The main detectors used were optical spark chambers but in order to provide information close to the vertices low-mass magnetostrictive chambers were fitted inside the cone of the superconducting polarised target magnet. (U.K.)

Drift chambers on the basis of Mylar tube blocks

Science.gov (United States)

Budagov, Yu.; Chirikov-Zorin, I.; Golovanov, L.; Khazins, D.; Kuritsin, A.; Pukhov, O.; Zhukov, V.

1993-06-01

Prototypes of drift chambers constructed of Mylar tube blocks were tested. The purpose of developing tube blocks technology was to create long chambers (up to 3-4 m). Counting and drift characteristics of the chambers for different values of the gas pressure and different diameters of sense wires are presented. The lifetime of the chambers is determined. A photoeffect in the visible spectrum on the surface of the thin film aluminium cathode, which covers the Mylar tubes was observed.

Drift chambers on the basis of Mylar tube blocks

International Nuclear Information System (INIS)

Budagov, Yu.; Chirikov-Zorin, I.; Golovanov, L.; Khazins, D.; Kuritsin, A.; Pukhov, U.; Zhukov, V.

1993-01-01

Prototypes of drift chambers constructed of Mylar tube blocks were tested. The purpose of developing tube blocks technology was to create chambers (up to 3-4 m). Counting and drift chracteristics of the chambers for different values of the gas pressure and different diameters of sense wires are presented. The lifetime of the chambers is determined. A photoeffect in the visible spectrum on the surface of the thin film aluminium cathode, which covers the Mylar tubes was observed. (orig.)

Raymond J. Chambers--A Personal Reflection

Science.gov (United States)

Gaffikin, Michael

2012-01-01

This paper is presented as a tribute to Raymond J. Chambers. As its title suggests, it is a personal reflection through the eyes of someone who worked closely with him over a period of 10 years during a latter part of his career, and who completed a doctoral thesis with aspects of the work of Chambers as its subject. During this time, author…

Ultra-low mass drift chambers

Science.gov (United States)

Assiro, R.; Cappelli, L.; Cascella, M.; De Lorenzis, L.; Grancagnolo, F.; Ignatov, F.; L'Erario, A.; Maffezzoli, A.; Miccoli, A.; Onorato, G.; Perillo, M.; Piacentino, G.; Rella, S.; Rossetti, F.; Spedicato, M.; Tassielli, G.; Zavarise, G.

2013-08-01

We present a novel low mass drift chamber concept, developed in order to fulfill the stringent requirements imposed by the experiments for extremely rare processes, which require high resolutions (order of 100-200 keV/c) for particle momenta in a range (50-100 MeV/c) totally dominated by the multiple scattering contribution. We describe a geometry optimization procedure and a new wiring strategy with a feed-through-less wire anchoring system developed and tested on a drift chamber prototype under completion at INFN-Lecce .

Five reasons to join local Chamber of Commerce and Industry

OpenAIRE

Verbovskii, Vladislav; Kosov, Vladimir; Chaika (Chayka), Yuliya Aleksandrovna

2016-01-01

The article describes five useful things that Chamber of Commerce and Industry membership may give to business owners after joining it. These things are the reasons to become a part of business community formed by Chambers of Commerce that may be considered by those business owner who are deciding whether to join Chamber of Commerce or not. Mentioned reasons are given with examples related to Tomsk Chamber of Commerce and Industry and are relevant to any Chamber of Commerce located in Russian...

Flexible geometry hodoscope using proportional chamber cathode read-out

International Nuclear Information System (INIS)

Aubret, C.; Bellefon, A. de; Benoit, P.; Brunet, J.M.; Tristram, G.

1978-01-01

The construction of a cathode read-out proportional chamber, used as a low mass hodoscope is described. Results on efficiency, time resolution and space resolution are shown. The associative logic, which permits the use of the chamber as a coplanarity chamber is briefly presented

Shielding Effectiveness Measurements using a Reverberation Chamber

NARCIS (Netherlands)

Leferink, Frank Bernardus Johannes; Bergsma, J.G.; Bergsma, Hans; van Etten, Wim

2006-01-01

Shielding effectiveness measurements have been performed using a reverberation chamber. The reverberation chamber methodology as we1l as the measurement setup is described and some results are given. Samples include glass reinforced plastic panels, aluminum panels with many holes, wire mesh, among

Amplifier Design for Proportional Ionization Chambers

Energy Technology Data Exchange (ETDEWEB)

Baker, W. H.

1950-08-24

This paper presents the requirements of a nuclear amplifier of short resolving time, designed to accept pulses of widely varying amplitudes. Data are given which show that a proportional ionization chamber loaded with a 1,000-ohm resistor develops pulses of 0.5 microsecond duration and several volts amplitude. Results indicate that seven basic requirements are imposed on the amplifier when counting soft beta and gamma radiation in the presence of alpha particles, without absorbers. It should, (1) have a fast recovery time, (2) have a relatively good low frequency response, (3) accept pulses of widely varying heights without developing spurious pulsed, (4) have a limiting output stage, (5) preserve the inherently short rise time of the chamber, (6) minimize pulse integration, and (7) have sufficient gain to detect the weak pulses well below the chamber voltage at which continuous discharge takes place. The results obtained with an amplifier which meets these requirements is described. A formula is derived which indicates that redesign of the proportional ionization chamber might eliminate the need for an amplifier. This may be possible if the radioactive particles are collimated parallel to the collecting electrode.

Double chambered right ventricle

International Nuclear Information System (INIS)

Cho, Chul Koo; Yu, Yun Jeong; Yeon, Kyung Mo; Han, Man Chung

1983-01-01

Fourteen cases of double chambered right ventricle were diagnosed angiographically and of these nine cases were confirmed after operation and autopsy at Seoul National University Hospital in recent four years since 1979. The clinical and radiological findings with the emphasis on the cinecardiographic findings were analysed. The summaries of the analysis are as follows: 1. Among 14 cases, 6 cases were male and 8 cases were female. Age distribution was from 4 years to 36 years. 2. In chest x-ray findings, pulmonary vascularity was increased in 8 cases, decreased in 4 cases, and normal in 2 cases. Cardiomegaly was observed in 8 cases and other showed normal heart size. 3. In cinecardiography, 11 cases had interventricular septal defect. Among these 11 cases, VSD located in proximal high pressure chamber was in 2 cases and located in distal low pressure chamber was in 9 cases. 4. The location of aberrant muscle bundle in sinus portion of right ventricle was in 8 cases. In the rest 6 cases, the aberrant muscle bundle was located below the infundibulum of right ventricle. 5. For accurate diagnosis and differential diagnosis with other congenital cardiac anomalies such as Tetralogy of Fallot or isolated pulmonic stenosis, biplane cineangiography and catheterization is an essential procedure

Double chambered right ventricle

Energy Technology Data Exchange (ETDEWEB)

Cho, Chul Koo; Yu, Yun Jeong; Yeon, Kyung Mo; Han, Man Chung [Seoul National University College of Medicine, Seoul (Korea, Republic of)

1983-12-15

Fourteen cases of double chambered right ventricle were diagnosed angiographically and of these nine cases were confirmed after operation and autopsy at Seoul National University Hospital in recent four years since 1979. The clinical and radiological findings with the emphasis on the cinecardiographic findings were analysed. The summaries of the analysis are as follows: 1. Among 14 cases, 6 cases were male and 8 cases were female. Age distribution was from 4 years to 36 years. 2. In chest x-ray findings, pulmonary vascularity was increased in 8 cases, decreased in 4 cases, and normal in 2 cases. Cardiomegaly was observed in 8 cases and other showed normal heart size. 3. In cinecardiography, 11 cases had interventricular septal defect. Among these 11 cases, VSD located in proximal high pressure chamber was in 2 cases and located in distal low pressure chamber was in 9 cases. 4. The location of aberrant muscle bundle in sinus portion of right ventricle was in 8 cases. In the rest 6 cases, the aberrant muscle bundle was located below the infundibulum of right ventricle. 5. For accurate diagnosis and differential diagnosis with other congenital cardiac anomalies such as Tetralogy of Fallot or isolated pulmonic stenosis, biplane cineangiography and catheterization is an essential procedure.

The Baltic Klint beneath the central Baltic Sea and its comparison with the North Estonian Klint

Science.gov (United States)

Tuuling, Igor; Flodén, Tom

2016-06-01

Along its contact with the Baltic Shield, the margin of the East European Platform reveals a well-developed, flooded terraced relief. The most striking and consistent set of escarpments at the contact of the Lower Palaeozoic calcareous and terrigenous rocks, known as the Baltic Klint (BK), extends from northwest of Russia to the Swedish island of Öland. Marine seismic reflection profiling in 1990-2004 revealed the central Baltic Sea Klint (BSK) section in detail and enabled comparison of its geology/geomorphology with a classical klint-section onshore, namely the North Estonian Klint (NEK). The conception of the BK onshore, which is based on the land-sea separating terraced relief in northern Estonia, is not fully applicable beneath the sea. Therefore, we consider that the BSK includes the entire terraced Cambrian outcrop. We suggest the term "Baltic Klint Complex" to include the well-terraced margin of the Ordovician limestone outcrop, which is weakly developed in Estonia. Because of a steady lithological framework of the bedrock layers across the southern slope of the Fennoscandian Shield, the central BSK in the western and the NEK in the eastern part of the Baltic Homocline have largely identical morphologies. The North Estonian Ordovician limestone plateau with the calcareous crest of the BK extends across the central Baltic Sea, whereas morphological changes/variations along the Klint base occur due to the east-westerly lithostratigraphic/thickness changes in the siliciclastic Cambrian sequence. The verge of the NEK, located some 30-50 m above sea level, starts to drop in altitude as its east-westerly course turns to northeast-southwest in western Estonia. Further westwards, the BK shifts gradually into southerly deepening (0.1-0.2°) layers as its crest drops to c. 150 m below sea level (b.s.l.) near Gotska Sandön. This course change is accompanied by a considerable decrease in thickness of the platform sedimentary cover, as below the central Baltic Sea the

NEG coating of the non-standard LSS vacuum chambers

CERN Document Server

Costa-Pinto, P

2005-01-01

The vacuum chambers of nearly all the warm magnets of the LHC (MBXW, MQW, MSI, MSD, etc…) will be coated with a Ti-Zr-V thin film by magnetron sputtering. The NEG coating is necessary to provide uniform pumping speed along the chambers and to suppress electron cloud instabilities and dynamic outgassing. The about 300 chambers will be coated using the existing facility, developed for the production of the standard LSS chambers, after minor modifications mainly due to the different cross sections. In order to cope with the present installation schedule, the production planning will allow processing of different families of chambers in parallel by using two or three coating systems simultaneously. After a brief introduction to the Ti-Zr-V characteristics and performances, the coating facility and strategy will be illustrated as well as the possible conflicts due to uncertainties in the planning of the experimental beam pipes and the standard LSS chambers.

An ionization chamber with magnetic levitated electrodes

CERN Document Server

Kawaguchi, T

1999-01-01

A new type of ionization chamber which has magnetically levitated electrodes has been developed. The electrodes are supplied voltages for the repelling of ions by a battery which is also levitated with the electrodes. The characteristics of this ionization chamber are investigated in this paper.

Characteristic parameters of drift chambers calculation

International Nuclear Information System (INIS)

Duran, I.; Martinez-Laso, L.

1989-01-01

We present here the methods we used to analyse the characteristic parameters of drift chambers. The algorithms to calculate the electric potential in any point for any drift chamber geometry are presented. We include the description of the programs used to calculate the electric field, the drift paths, the drift velocity and the drift time. The results and the errors are discussed. (Author) 7 refs

OPAL jet chamber full scale prototype

Energy Technology Data Exchange (ETDEWEB)

Fischer, H M; Hauschild, M; Hartmann, H; Hegerath, A; Boerner, H; Burckhart, H J; Dittmar, M; Hammarstroem, R; Heuer, R D; Mazzone, L

1986-12-01

The concept of a jet chamber for the central detector of OPAL has been tested with a full scale prototype. The design of this prototype, its mechanical and electrical structure and its support system for high voltage, gas, laser calibration and readout are described. Operating experience has been gathered since summer 1984. The chamber performance in terms of spatial resolution and particle identification capability is given.

OPAL jet chamber full-scale prototype

Energy Technology Data Exchange (ETDEWEB)

Fischer, H M; Hauschild, M; Hartmann, H; Hegerath, A; Boerner, H; Burckhart, H J; Dittmar, M; Hammarstroem, R; Heuer, R D; Mazzone, L

1986-12-01

The concept of a jet chamber for the central detector of OPAL was tested with a full scale prototype. The design of this prototype, its mechanical and electrical structure and its support system for high voltage, gas, laser calibration, and readout are described. Operating experience was gathered since summer 1984. The chamber performance in terms of spatial resolution and particle identification capability is given.

Georges Charpak and his multiwire chamber

CERN Multimedia

1970-01-01

In 1968, Georges Charpak developed the 'multiwire proportional chamber', a gas-filled box with a large number of parallel detector wires, each connected to individual amplifiers. Linked to a computer, it could achieve a counting rate a thousand times better than existing techniques - without a camera in sight. From left to right, Georges Charpak, Fabio Sauli and Jean-Claude Santiard working on a multiwire chamber in 1970.

Vertex chamber for the KEDR detector

International Nuclear Information System (INIS)

Aulchenko, V.M.; Chilingarov, A.G.; Kolachev, G.M.; Lazarenko, O.B.; Nagaslaev, V.P.; Romanov, L.V.

1989-01-01

The project and design of the vertex chamber for the KEDR detector is described. The chamber consists of 6 cylindrical layers of tubes with 10 mm diameter and 800 mm length. The tubes are made of 20 μm thick aluminized mylar. The prototype tests show that it is possible to achieve a resolution of 20-30 μm using the cool gas mixtures. (orig.)

Ultra-low mass drift chambers

International Nuclear Information System (INIS)

Assiro, R.; Cappelli, L.; Cascella, M.; De Lorenzis, L.; Grancagnolo, F.; Ignatov, F.; L'Erario, A.; Maffezzoli, A.; Miccoli, A.; Onorato, G.; Perillo, M.; Piacentino, G.; Rella, S.; Rossetti, F.; Spedicato, M.; Tassielli, G.

2013-01-01

We present a novel low mass drift chamber concept, developed in order to fulfill the stringent requirements imposed by the experiments for extremely rare processes, which require high resolutions (order of 100–200 keV/c) for particle momenta in a range (50–100 MeV/c) totally dominated by the multiple scattering contribution. We describe a geometry optimization procedure and a new wiring strategy with a feed-through-less wire anchoring system developed and tested on a drift chamber prototype under completion at INFN-Lecce

Ionization chambers for LET determination

DEFF Research Database (Denmark)

Kaiser, Franz-Joachim; Bassler, Niels; Tölli, Heikki

2010-01-01

resolution and high sensitivity are necessary. For exact dosimetry which is done using ionization chambers (ICs), the recombination taking place in the IC has to be known. Up to now, recombination is corrected phenomenologically and more practical approaches are currently used. Nevertheless, Jaff´e's theory...... of columnar recombination was designed to model the detector efficiency of an ionization chamber. Here, we have shown that despite the approximations and simplification made, the theory is correct for the LETs typically found in clinical radiotherapy employing particles from protons to carbon ions...

Procurement specification high vacuum test chamber and pumping system

International Nuclear Information System (INIS)

1976-01-01

The specification establishes requirements for a high-vacuum test chamber, associated vacuum pumps, valves, controls, and instrumentation that shall be designed and fabricated for use as a test chamber for testing a closed loop Brayton Isotope Power System (BIPS) Ground Demonstration System (GDS). The vacuum system shall include all instrumentation required for pressure measurement and control of the vacuum pumping system. A general outline of the BIPS-GDS in the vacuum chamber and the preliminary piping and instrumentation interface to the vacuum chamber are shown

Drift chambers on the basis of mylar tubing blocks

International Nuclear Information System (INIS)

Budagov, Yu.A.; Golovanov, L.B.; Kuritsin, A.A.; Pukhov, O.E.; Khazins, D.M.; Chirikov-Zorin, I.E.; Joint Inst. for Nuclear Research, Dubna; Zhukov, V.Yu.

1992-01-01

We tested the models of the drift chambers, which are constructed of mylar tubing blocks. The purpose of the tubing block forming technology is to create long chambers (up to 3-4 meters). There are count and drift characteristics of the chambers for different gas pressures and different diameters of sense wires. The service time of the chambers is defined. We registered a photoeffect in the visible spectrum area, which is displayed on the surface of the mylar film cathode, covered by aluminium. 8 refs.; 5 figs

Advanced Modified High Performance Synthetic Jet Actuator with Curved Chamber

Science.gov (United States)

Xu, Tian-Bing (Inventor); Su, Ji (Inventor); Jiang, Xiaoning (Inventor)

2014-01-01

The advanced modified high performance synthetic jet actuator with optimized curvature shape chamber (ASJA-M) is a synthetic jet actuator (SJA) with a lower volume reservoir or chamber. A curved chamber is used, instead of the conventional cylinder chamber, to reduce the dead volume of the jet chamber and increase the efficiency of the synthetic jet actuator. The shape of the curvature corresponds to the maximum displacement (deformation) profile of the electroactive diaphragm. The jet velocity and mass flow rate for the ASJA-M will be several times higher than conventional piezoelectric actuators.

OPAL Muon Chamber

CERN Multimedia

OPAL was one of the 4 experiments installed at the LEP particle accelerator from 1989 to 2000. This is a slice of the outermost layer of OPAL : the muon chambers. This outside layer detects particles which are not stopped by the previous layers. These are mostly muons.

Council Chamber exhibition

CERN Multimedia

CERN Bulletin

2010-01-01

To complete the revamp of CERN’s Council Chamber, a new exhibition is being installed just in time for the June Council meetings.   Panels will showcase highlights of CERN’s history, using some of the content prepared for the exhibitions marking 50 years of the PS, which were displayed in the main building last November. The previous photo exhibition in the Council Chamber stopped at the 1970s. To avoid the new panels becoming quickly out of date, photos are grouped together around specific infrastructures, rather than following a classic time-line. “We have put the focus on the accelerators – the world-class facilities that CERN has been offering researchers over the years, from the well-known large colliders to the lesser-known smaller facilities,” says Emma Sanders, who worked on the content. The new exhibition will be featured in a future issue of the Bulletin with photos and an interview with Fabienne Marcastel, designer of the exhibit...

Grupuskulaarne identiteediloome paremäärmuslaste võrgusuhtluses / The Formation of Groupuscular Identity in the Web Communication of the Estonian Extreme Right

Directory of Open Access Journals (Sweden)

Mari-Liis Madisson

2015-06-01

Full Text Available Teesid: Artikli eesmärgiks on avada eesti paremäärmuslaste tähendusloomet hüpermeedias. Roger Griffini teooria järgi iseloomustab paremäärmuslaste võrgusuhtluse väikeste mitteparteiliste üksuste – grupuskulite (nt veebilehed, blogid paljusus ja suhteline marginaalsus, rahulolematus praeguse maailmakorraga, ideede revolutsioonilisus ning risoomne ehk mitte-hierarhiline kommunikatsioonistruktuur. Täiendame Griffini teooriat kultuurisemiootika ideedega. Semiosfääri kontseptsioon võimaldab paremini analüüsida grupuskulite kommunikatsiooni eripära ja seal tekkivaid tähendushierarhiaid. Koodteksti mõiste selgitab aga, miks, vaatamata hüpermeedias kättesaadavale arvamuste paljususele, domineerivad grupuskulaarses kommunikatsioonis väga kindlad tähendusloome viisid.    S U M M A R Y The purpose of this article is to create a conceptual framework which would aid in the understanding of the characteristic ways the Estonian extreme right has created the prevalent identities and meanings that are currently in circulation in the media. The analysis is based on non-participant observation, by means of which we have attempted to isolate the main foci and dominant practices of self-description found in web communications among members of the Estonian extreme right. Based on the number of visitors to sites, the concentration of topics posted and frequency of citation, we take the following as representatives of extreme right positions: the blogs „The Nationalist“ („Rahvuslane“, „NS“, and „Nationalist“ („Rahvuslik“, and the alternative web pages „Be Aware“ („Ole Teadlik“ and „BHR Ruzzland“. Markers of the extreme right were present in the pages we examined at different levels of intensity; in fact, not every post to these pages clearly, not every page could be labelled as extreme right. Yet the general tonality of the webpages we examined included the following: an urgent need to conserve �

Evaluation of ion chamber dependent correction factors for ionisation chamber dosimetry in proton beams using a Monte Carlo method

Energy Technology Data Exchange (ETDEWEB)

Palmans, H [Ghent Univ. (Belgium). Dept. of Biomedical Physics; Verhaegen, F

1995-12-01

In the last decade, several clinical proton beam therapy facilities have been developed. To satisfy the demand for uniformity in clinical (routine) proton beam dosimetry two dosimetry protocols (ECHED and AAPM) have been published. Both protocols neglect the influence of ion chamber dependent parameters on dose determination in proton beams because of the scatter properties of these beams, although the problem has not been studied thoroughly yet. A comparison between water calorimetry and ionisation chamber dosimetry showed a discrepancy of 2.6% between the former method and ionometry following the ECHED protocol. Possibly, a small part of this difference can be attributed to chamber dependent correction factors. Indications for this possibility are found in ionometry measurements. To allow the simulation of complex geometries with different media necessary for the study of those corrections, an existing proton Monte Carlo code (PTRAN, Berger) has been modified. The original code, that applies Mollire`s multiple scattering theory and Vavilov`s energy straggling theory, calculates depth dose profiles, energy distributions and radial distributions for pencil beams in water. Comparisons with measurements and calculations reported in the literature are done to test the program`s accuracy. Preliminary results of the influence of chamber design and chamber materials on dose to water determination are presented.

Evaluation of ion chamber dependent correction factors for ionisation chamber dosimetry in proton beams using a Monte Carlo method

International Nuclear Information System (INIS)

Palmans, H.; Verhaegen, F.

1995-01-01

In the last decade, several clinical proton beam therapy facilities have been developed. To satisfy the demand for uniformity in clinical (routine) proton beam dosimetry two dosimetry protocols (ECHED and AAPM) have been published. Both protocols neglect the influence of ion chamber dependent parameters on dose determination in proton beams because of the scatter properties of these beams, although the problem has not been studied thoroughly yet. A comparison between water calorimetry and ionisation chamber dosimetry showed a discrepancy of 2.6% between the former method and ionometry following the ECHED protocol. Possibly, a small part of this difference can be attributed to chamber dependent correction factors. Indications for this possibility are found in ionometry measurements. To allow the simulation of complex geometries with different media necessary for the study of those corrections, an existing proton Monte Carlo code (PTRAN, Berger) has been modified. The original code, that applies Mollire's multiple scattering theory and Vavilov's energy straggling theory, calculates depth dose profiles, energy distributions and radial distributions for pencil beams in water. Comparisons with measurements and calculations reported in the literature are done to test the program's accuracy. Preliminary results of the influence of chamber design and chamber materials on dose to water determination are presented

Numerical solutions of differential equations of an ionization chamber

International Nuclear Information System (INIS)

Novkovic, D.; Tomasevic, M.; Subotic, K.; Manic, S.

1998-01-01

A system of reduced differential equations generally valid for plane-parallel, cylindrical, and spherical ionization chambers filled with air, which is appropriate for numerical solution, has been derived. The system has been solved for all three geometries. The comparison of the calculated results of Armstrong and Tate, for plane-parallel ionization chambers, and Sprinkle and Tate, for spherical ionization chambers, with the present calculations has shown a good agreement. The calculated values for ionization chambers filled with CO 2 were also in good agreement with the experimental data of Moriuchi et al (author)

Sources and distribution of trace elements in Estonian peat

Science.gov (United States)

Orru, Hans; Orru, Mall

2006-10-01

This paper presents the results of the distribution of trace elements in Estonian mires. Sixty four mires, representative of the different landscape units, were analyzed for the content of 16 trace elements (Cr, Mn, Ni, Cu, Zn, and Pb using AAS; Cd by GF-AAS; Hg by the cold vapour method; and V, Co, As, Sr, Mo, Th, and U by XRF) as well as other peat characteristics (peat type, degree of humification, pH and ash content). The results of the research show that concentrations of trace elements in peat are generally low: V 3.8 ± 0.6, Cr 3.1 ± 0.2, Mn 35.1 ± 2.7, Co 0.50 ± 0.05, Ni 3.7 ± 0.2, Cu 4.4 ± 0.3, Zn 10.0 ± 0.7, As 2.4 ± 0.3, Sr 21.9 ± 0.9, Mo 1.2 ± 0.2, Cd 0.12 ± 0.01, Hg 0.05 ± 0.01, Pb 3.3 ± 0.2, Th 0.47 ± 0.05, U 1.3 ± 0.2 μg g - 1 and S 0.25 ± 0.02%. Statistical analyses on these large database showed that Co has the highest positive correlations with many elements and ash content. As, Ni, Mo, ash content and pH are also significantly correlated. The lowest abundance of most trace elements was recorded in mires fed only by precipitation (ombrotrophic), and the highest in mires fed by groundwater and springs (minerotrophic), which are situated in the flood plains of river valleys. Concentrations usually differ between the superficial, middle and bottom peat layers, but the significance decreases depending on the type of mire in the following order: transitional mires - raised bogs - fens. Differences among mire types are highest for the superficial but not significant for the basal peat layers. The use of peat with high concentrations of trace elements in agriculture, horticulture, as fuel, for water purification etc., may pose a risk for humans: via the food chain, through inhalation, drinking water etc.

Effects of ionization chamber construction on dose measurements in a heterogeneity

International Nuclear Information System (INIS)

Mauceri, T.; Kase, K.

1987-01-01

Traditionally, measurements have been made in heterogeneous phantoms to determine the factors which should be applied to dose calculations, when calculating a dose to a heterogeneous medium. Almost all measurements have relied on relatively thin-walled ion chambers, with no attempt to match ion chamber wall material to the measuring medium. The recent AAPM dosimetry protocol has established that a mismatch between ion chamber wall and phantom material can have an effect on dose measurement. To investigate the affect of this mismatch of ion chamber wall material to phantom material, two parallel-plate ion chambers were constructed. One ion chamber from solid water, for measurements in a solid water phantom and the other from plastic lung material, for measurements in a plastic lung material phantom. Correction factors measured by matching ion chamber to media were compared to correction factors measured by using a thin-walled cavity ion chamber with no regard for matching wall and media for cobalt-60, 6-, 10- and 20-MV photon beams. The results demonstrated that the matching of ion chamber to measuring media can be ignored, provided that a small, approximately tissue-equivalent, thin-walled ion chamber is used for measuring the correction factors

THE CATEGORIZATION OF THE ESTONIAN DOMAIN OF “MUSICAL INSTRUMENTS” ‒ LISTENERS VS MUSICIANS AND THE COMPARISON OF BASIC LEVELS

Directory of Open Access Journals (Sweden)

Martin Eessalu

2012-01-01

Full Text Available The article examines the prototypicality phenomena in the Estonian language’s lexical-semantic domain of “musical instruments”. There are two groups of people under examination: (i those who consider themselves actively involved in music (practitioners, and (iithose who don’t (listeners. To elicit basic terms, a cognitive salience index is used. The results show that the main common feature between the groups is that the basic level consists of the same members: klaver ‘piano’, kitarr ‘guitar’ and viiul ‘violin’. While klaver and viiul are stable in their nature, the salience of kitarr varies greatly, as listeners put it in the leading position and practitioners nearly leave it out of the basic level. Generally, the two groups share the same category structure,as based on cognitive salience index values both have: (i three basic terms, (ii a connecting group, and (iii the rest of the category members with their index values decreasing toward zero.

Field trial on progesterone cycles, metabolic profiles, body condition score and their relation to fertility in Estonian Holstein dairy cows.

Science.gov (United States)

Samarütel, J; Ling, K; Waldmann, A; Jaakson, H; Kaart, T; Leesmäe, A

2008-08-01

Resumption of luteal activity postpartum and fertility were investigated in an Estonian Holstein high milk production and good fertility dairy herd. Body condition was scored after every 10 days in 54 multiparous dairy cows (71 lactations) calving inside from December to March during 4-year period. Blood samples were taken 1-14 days before calving and 1-14, 28-42 and 63-77 days after calving: analytes estimated were serum aspartate aminotransferase (AST), glucose, ketone bodies, total cholesterol, non-esterified fatty acids and triglycerides. The general linear mixed model was used to compare the data for cows with different characteristics in luteal activity postpartum based on their milk progesterone profiles. Forty-five per cent of cases had abnormal profiles; delayed resumption of ovarian cyclicity postpartum (DC) was the most prevalent abnormality. There was no difference in body condition scores between the groups. The DC and prolonged luteal phase groups had higher serum AST activity (p fertility.

Computational investigation of the temperature separation in vortex chamber

International Nuclear Information System (INIS)

Anish, S.; Setoguchi, T.; Kim, H. D.

2014-01-01

The vortex chamber is a mechanical device, without any moving parts that separates compressed gas into a high temperature region and a low temperature region. Functionally vortex chamber is similar to a Ranque-Hilsch vortex tube (RVHT), but it is a simpler and compact structure. The objective of the present study is to investigate computationally the physical reasoning behind the energy separation mechanism inside a vortex chamber. A computational analysis has been performed using three-dimensional compressible Navier Stokes equations. A fully implicit finite volume scheme was used to solve the governing equations. A commercial software ANSYS CFX is used for this purpose. The computational predictions were validated with existing experimental data. The results obtained show that the vortex chamber contains a large free vortex zone and a comparatively smaller forced vortex region. The physical mechanism that causes the heating towards periphery of the vortex chamber is identified as the work done by the viscous force. The cooling at the center may be due to expansion of the flow. The extent of temperature separation greatly depends on the outer diameter of the vortex chamber. A small amount of compression is observed towards the periphery of the vortex chamber when the outer diameter is reduced.

Installation and Commissioning of the new GLM Implantation Chamber

CERN Document Server

Pohl, Christoph

2016-01-01

Summer student report about the work with the new implantation chamber for the GLM branch of ISOLDE. In the context of this project an API for the vacuum system of the new chamber was developed and implemented in web application that will be used to control the new implantation chamber at some point.

The ontogeny of choanocyte chambers during metamorphosis in the demosponge Amphimedon queenslandica

Directory of Open Access Journals (Sweden)

Shunsuke Sogabe

2016-03-01

Full Text Available Abstract Background The aquiferous body plan of poriferans revolves around internal chambers comprised of choanocytes, a cell type structurally similar to choanoflagellates. These choanocyte chambers perform a range of physiological and developmental functions, including the capture of food and the generation of stem cells. Despite the increasing interest for choanocytes as sponge stem cells, there is limited knowledge on the development of choanocyte chambers. Using a combination of cell lineage tracing, antibody staining and EdU labeling, here we examine the development of choanocytes and the chambers they comprise during metamorphosis in the marine demosponge Amphimedon queenslandica. Results Lineage-tracing experiments show that larval epithelial cells transform into mesenchymal pluripotent stem cells, resembling archeocytes, within 24 h of initiating metamorphosis. By 36 h, some of these labeled archeocyte-like cells have differentiated into choanocytes that will form the first postlarval choanocyte chambers. Non-labeled cells also contribute to these primary choanocyte chambers, consistent with these chambers being a chimera of multiple transdifferentiated larval cell types and not the proliferation of a single choanocyte precursor. Moreover, cell proliferation assays demonstrate that, following the initial formation of choanocyte chambers, chambers grow at least partially by the proliferation of choanocytes within the chamber, although recruitment of individual cells into established chambers also appears to occur. EdU labeling of postlarvae and juveniles reveals that choanocyte chambers are the primary location of cell proliferation during metamorphosis. Conclusion Our results show that multiple larval cell lineages typically contribute to formation of individual choanocyte chambers at metamorphosis, contrary to previous reports in other species that show sponge choanocyte chambers form clonally. Choanocytes in postlarval and juvenile

OPAL jet chamber full scale prototype

Energy Technology Data Exchange (ETDEWEB)

Fischer, H M; Hauschild, M; Hartmann, H; Hegerath, A; Boerner, H; Burckhart, H J; Dittmar, M; Hammarstreom, R; Heuer, R D; Mazzone, L

1986-05-22

The concept of a jet chamber for the central detector of OPAL has been tested with a full scale prototype. The design of this prototype, its mechanical and electrical structure and its support system for high voltage, gas, laser calibration and readout are described. The operating experience gathered since the summer of 1984 and the chamber performance as measured by its spatial resolution and ability to identify particles are also given.

Neutron induced current pulses in fission chambers

International Nuclear Information System (INIS)

Taboas, A.L.; Buck, W.L.

1978-01-01

The mechanism of neutron induced current pulse generation in fission chambers is discussed. By application of the calculated detector transfer function to proposed detector current pulse shapes, and by comparison with actually observed detector output voltage pulses, a credible, semi-empirical, trapezoidal pulse shape of chamber current is obtained

Alberta Chamber of Resources: 1998 in review

International Nuclear Information System (INIS)

Simpson, R.

1999-01-01

Several key initiatives taken by the Alberta Chamber of Resources during 1998 are described. Among these initiatives special mention is made of strengthening the relations between the Chamber and the University of Calgary and the University of Alberta through regular contributions to business plan reviews, scholarships, and advisory committees. Working with the Department of Energy on a range of issues involving the environment, taxation, and mineral rights tenure is an area the ACR is involved. Hosting a workshop on the economic and social values and trade-offs in the green areas of Alberta and working with the University Alberta regarding the development of an advisory committee on forest resource valuation is another area. Strategizing the Oil Sands Task Force to strengthen it in the areas of industrial coordination, by-product utilization, the creation niche markets and product quality and investigating, through the Black Oil Pipeline Steering Committee, transportation, technological and marketing issues related to the oil sands are other interests. In the Mineral Sector, the Chamber facilitated discussions towards a Non-Energy Minerals and Mines Act, which among other long-range beneficial effects, prompted the provincial government to provide an additional $ 1.5 million to the Alberta Geological Survey. In the Utilities Sector, the Chamber continued to bring together various parties to work on common challenges and opportunities. Much interest has been generated also on upgraders and research facilitated by the Chamber either with members of the Alberta Research Council, or the National Centre for Upgrading Technology or similar organizations. This kind of facilitation helps the Chamber's member companies to realize cost reductions in development and application of new technologies

Ion chamber instrument

International Nuclear Information System (INIS)

Stephan, D.H.

1975-01-01

An electrical ionization chamber is described having a self-supporting wall of cellular material which is of uniform areal density and formed of material, such as foamed polystyrene, having an average effective atomic number between about 4 and about 9, and easily replaceable when on the instrument. (auth)

2D convolution kernels of ionization chambers used for photon-beam dosimetry in magnetic fields: the advantage of small over large chamber dimensions

Science.gov (United States)

Khee Looe, Hui; Delfs, Björn; Poppinga, Daniela; Harder, Dietrich; Poppe, Björn

2018-04-01

This study aims at developing an optimization strategy for photon-beam dosimetry in magnetic fields using ionization chambers. Similar to the familiar case in the absence of a magnetic field, detectors should be selected under the criterion that their measured 2D signal profiles M(x,y) approximate the absorbed dose to water profiles D(x,y) as closely as possible. Since the conversion of D(x,y) into M(x,y) is known as the convolution with the ‘lateral dose response function’ K(x-ξ, y-η) of the detector, the ideal detector would be characterized by a vanishing magnetic field dependence of this convolution kernel (Looe et al 2017b Phys. Med. Biol. 62 5131–48). The idea of the present study is to find out, by Monte Carlo simulation of two commercial ionization chambers of different size, whether the smaller chamber dimensions would be instrumental to approach this aim. As typical examples, the lateral dose response functions in the presence and absence of a magnetic field have been Monte-Carlo modeled for the new commercial ionization chambers PTW 31021 (‘Semiflex 3D’, internal radius 2.4 mm) and PTW 31022 (‘PinPoint 3D’, internal radius 1.45 mm), which are both available with calibration factors. The Monte-Carlo model of the ionization chambers has been adjusted to account for the presence of the non-collecting part of the air volume near the guard ring. The Monte-Carlo results allow a comparison between the widths of the magnetic field dependent photon fluence response function K M(x-ξ, y-η) and of the lateral dose response function K(x-ξ, y-η) of the two chambers with the width of the dose deposition kernel K D(x-ξ, y-η). The simulated dose and chamber signal profiles show that in small photon fields and in the presence of a 1.5 T field the distortion of the chamber signal profile compared with the true dose profile is weakest for the smaller chamber. The dose responses of both chambers at large field size are shown to be altered by not

Searching for Roots. Pärt: Symphony No. 1, "Polyphonic" / Guy S. Rickards

Index Scriptorium Estoniae

Rickards, Guy S.

1997-01-01

Uuest heliplaadist "Searching for Roots. Pärt: Symphony No. 1, "Polyphonic". Nekrolog, Op. 3; Tubin: Symphony No. 11; Tüür: Searching for Roots. Insula deserta. Zeitraum. Royal Stockholm Philharmonic Orchestra / Paavo Järvi. Virgin Classics VC5 45212-2 (72 min.:DDD)

Stenhammer: Concerto for Piano and Orchestra No. 2 in D minor / Robert Layton

Index Scriptorium Estoniae

Layton, Robert

1994-01-01

Uuest heliplaadist "Stenhammer: Concerto for Piano and Orchestra No. 2 in D minor, Op. 23. Serenade in F, Op. 31. Florez och Blanzeflor, Op. 3... Munich Philharmonic Orchestra / Stig Westerberg; Serenade - selected comparison: Gothenburg SO, Järvi" (2/87) BIS CD 310

The beam tube chamber of the CELLO Detector

International Nuclear Information System (INIS)

Sack, B.

1984-06-01

The beam tube chamber of the CELLO detector is since September 1982 in operation and works without problem. The main aim of this thesis was to determine using muons from the cosmic radiation the improvement in the momentum and vertex resolution by the beam tube chamber. Before this comparison could be performed the accurate position of the beam tube chamber had to be determined. After the performed position determination the spatial resolution amounts to 181 μm. The expected improvement factors could be reached completely both by cosmic radiation and by Bhabha events not studied in this thesis. The transverse momentum resolution amounts to the 1.18% x psub(T)(GeV/c). The vertex resolution is improved to 300 μm. Additionally by the beam tube chamber the time of an events can be measured with an occuracy of 5.7 ns. Finally is remains to be remarked that the beam tube chamber satisfies completely the requirements and represents a simple, but efficient supplement to the CELLO detector. [de

Space shuttle orbit maneuvering engine reusable thrust chamber program

Science.gov (United States)

Senneff, J. M.

1975-01-01

Reusable thrust chamber and injector concepts were evaluated for the space shuttle orbit maneuvering engine (OME). Parametric engine calculations were carried out by computer program for N2O4/amine, LOX/amine and LOX/hydrocarbon propellant combinations for engines incorporating regenerative cooled and insulated columbium thrust chambers. The calculation methods are described including the fuel vortex film cooling method of combustion gas temperature control, and performance prediction. A method of acceptance of a regeneratively cooled heat rejection reduction using a silicone oil additive was also demonstrated by heated tube heat transfer testing. Regeneratively cooled thrust chamber operation was also demonstrated where the injector was characterized for the OME application with a channel wall regenerative thrust chamber. Bomb stability testing of the demonstration chambers/injectors demonstrated recovery for the nominal design of acoustic cavities. Cavity geometry changes were also evaluated to assess their damping margin. Performance and combustion stability was demonstrated of the originally developed 10 inch diameter combustion pattern operating in an 8 inch diameter thrust chamber.

HF production in CMS-Resistive Plate Chambers

International Nuclear Information System (INIS)

Abbrescia, M.; Colaleo, A.; Guida, R.; Iaselli, G.; Loddo, F.; Maggi, M.; Marangelli, B.; Natali, S.; Nuzzo, S.; Pugliese, G.; Ranieri, A.; Romano, F.; Trentadue, R.; Cavallo, N.; Fabozzi, F.; Paolucci, P.; Piccolo, D.; Polese, G.; Sciacca, C.; Belli, G.; Necchi, M.; Ratti, S.; Riccardi, C.; Torre, P.; Vitulo, P.; Anguelov, T.; Genchev, V.; Panev, B.; Piperov, S.; Sultanov, G.; Vankov, P.; Litov, L.; Pavlov, B.; Petkov, P.

2006-01-01

The formation of highly reactive compounds in the gas mixture during Resistive Plate Chambers (RPCs) operation at the CERN Gamma Irradiation Facility (GIF) is studied. Results from two different types of chambers are discussed: 50 x 50 cm 2 RPC prototypes and two final CMS-RB1 chambers. The RB1 detectors were also connected to a closed loop gas system. Gas composition, possible additional impurities as well as fluoride ions have been monitored in different gamma irradiation conditions both in open and closed loop mode. The chemical composition of the RPC electrode surface has also been analyzed using an electron microscope equipped with an EDS/X-ray

Chamber transport for heavy ion fusion

International Nuclear Information System (INIS)

Olson, Craig L.

2014-01-01

A brief review is given of research on chamber transport for HIF (heavy ion fusion) dating from the first HIF Workshop in 1976 to the present. Chamber transport modes are categorized into ballistic transport modes and channel-like modes. Four major HIF reactor studies are summarized (HIBALL-II, HYLIFE-II, Prometheus-H, OSIRIS), with emphasis on the chamber transport environment. In general, many beams are used to provide the required symmetry and to permit focusing to the required small spots. Target parameters are then discussed, with a summary of the individual heavy ion beam parameters required for HIF. The beam parameters are then classified as to their line charge density and perveance, with special emphasis on the perveance limits for radial space charge spreading, for the space charge limiting current, and for the magnetic (Alfven) limiting current. The major experiments on ballistic transport (SFFE, Sabre beamlets, GAMBLE II, NTX, NDCX) are summarized, with specific reference to the axial electron trapping limit for charge neutralization. The major experiments on channel-like transport (GAMBLE II channel, GAMBLE II self-pinch, LBNL channels, GSI channels) are discussed. The status of current research on HIF chamber transport is summarized, and the value of future NDCX-II transport experiments for the future of HIF is noted

40 CFR 92.110 - Weighing chamber and micro-balance.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Weighing chamber and micro-balance. 92... Weighing chamber and micro-balance. (a) Ambient conditions—(1) Temperature. The temperature of the chamber... shall be 45±8 percent during all filter conditioning and weighing. The dew point shall be 6.4 to 12.4 °C...

The Mark III vertex chamber

International Nuclear Information System (INIS)

Adler, J.; Bolton, T.; Bunnell, K.

1987-07-01

The design and construction of the new Mark III vertex chamber is described. Initial tests with cosmic rays prove the ability of track reconstruction and yield triplet resolutions below 50 μm at 3 atm using argon/ethane (50:50). Also performed are studies using a prototype of a pressurized wire vertex chamber with 8 mm diameter straw geometry. Spatial resolution of 35mm was obtained using dimethyl ether (DME) at 1 atm and 30 μm using argon/ethane (50/50 mixture) at 4 atm. Preliminary studies indicate the DME to adversely affect such materials as aluminized Mylar and Delrin

ALICE Time Projection Chamber

CERN Multimedia

Lippmann, C

2013-01-01

The Time Projection Chamber (TPC) is the main device in the ALICE 'central barrel' for the tracking and identification (PID) of charged particles. It has to cope with unprecedented densities of charges particles.

USE OF GROWTH CHAMBERS FOR CABBAGE BREEDING

Directory of Open Access Journals (Sweden)

L. L. Bondareva

2014-01-01

Full Text Available Use of the growth chambers for cabbage breeding allows the reducing of certain stages of the breeding process and the growing biennial varieties of cabbage in a one-year cycle. In these growth chambers, the nutritional conditions, temperature, and lighting of plants are under control; the open pollination is eliminated.

Limited streamer chamber testing and quality evaluation in ASTRA

International Nuclear Information System (INIS)

Anzivino, G.; Bianco, S.; Casaccia, R.

1991-01-01

Limited streamer chambers are extensively used for high-energy and nuclear physics experiments in accelerator and underground laboratories. The tracking system of LVD, an underground experiment to study muons and nutrino astronomy, will use roughly 15000 limited streamer chambers and 100000 external pickup strips with digital readout electronics. In the article the different aspects of chamber operation that serve to establish a testing procedure and to define acceptance criteria for selecting reliable and long-life devices, are discussed. The procedures and the results obtained from a long-term test to evaluate streamer chamber quality, based upon a sample of 2900 items, are described. The selection tests and the long-term observations have been performed in the ASTRA laboratory, established at the Laboratori Nazionali di Frascati to carry out quality control procedures for streamer chambers on a large scale and in a controlled environment

Influence of chamber misalignment on cased telescoped (CT ammunition accuracy

Directory of Open Access Journals (Sweden)

D. Corriveau

2016-04-01

Full Text Available As part of a research program, it was desired to better understand the impact of the rotating chamber alignment with the barrel throat on the precision and accuracy of a novel cased telescoped (CT ammunition firing rifle. In order to perform the study, a baseline CT ammunition chamber which was concentric with a Mann barrel bore was manufactured. Additionally, six chambers were manufactured with an offset relative to the barrel bore. These chambers were used to simulate a misaligned chamber relative to the bore axis. Precision and accuracy tests were then performed at 200 m in an indoor range under controlled conditions. For this project, 5.56 mm CT ammunition was used. As the chamber axis offset relative to the gun bore was increased, the mean point of impact was displaced away from the target center. The shift in the impact location is explained by the presence of in-bore yaw which results in lateral throw-off and aerodynamic jump components. The linear theory of ballistics is used to establish a relationship between the chamber misalignment and the resulting projectile mean point of impact for a rifle developed to fire CT ammunition. This relationship allows for the prediction of the mean point of impact given a chamber misalignment.

Evaluation of the operational characteristics of a CT ionization chamber

International Nuclear Information System (INIS)

Maia, Ana F.; Caldas, Linda V.E.

2006-01-01

The most common ionization chamber used in computed tomography dosimetry is the 'pencil ionization chamber'. It is a special cylindrical dosimeter developed for attending computed tomography beams particularities. In this study, a Victoreen pencil ionization chamber was submitted to a set of tests for a detailed evaluation of its operational characteristics. Such as many kinds of detectors, especially field instruments, this ionization chamber had originally a preamplifier to keep it electrically more stable. In this study, the performance of the chamber was analyzed with the original preamplifier and after its removal, and the results were compared. The objective of the preamplifier removal was to enable connecting the chamber to other kinds of electrometers available in laboratories. The behavior of the pencil ionization chamber before and after the removal of the preamplifier was very similar, and the results obtained were always within the limits of international recommendations. The results obtained in both situations allow, if necessary, the preamplifier removal of the system without lack of precision in the measurements

Photodegradation of polyaromatic hydrocarbons in passive air samplers: Field testing different deployment chambers

International Nuclear Information System (INIS)

Bartkow, Michael E.; Kennedy, Karen E.; Huckins, James N.; Holling, Neil; Komarova, Tatiana; Mueller, Jochen F.

2006-01-01

Semi-permeable membrane devices (SPMDs) were loaded with deuterated anthracene and pyrene as performance reference compounds (PRCs) and deployed at a test site in four different chambers (open and closed box chamber, bowl chamber and cage chamber) for 29 days. The losses of PRCs and the uptake of polyaromatic hydrocarbons (PAHs) from the ambient air were quantified. UV-B levels measured in each deployment chamber indicated that SPMDs would be exposed to the most UV-B in the cage chamber and open box chamber. Significantly less PAHs were quantified in SPMDs deployed in the cage chamber and open box chamber compared to samplers from the other two chambers, suggesting that photodegradation of PAHs had occurred. The loss of PRCs confirmed these results but also showed that photodegradation was occurring in the closed box chamber. The bowl chamber appears to provide the best protection from the influence of direct photodegradation. - Photodegradation/loss of PAHs occurs from passive air samplers (SPMDs) deployed in various sampler chambers

An examination of medical linear accelerator ion-chamber performance

International Nuclear Information System (INIS)

Karolis, C.; Lee, C.; Rinks, A.

1996-01-01

Full text: The company ( Radiation Oncology Physics and Engineering Services Pty Ltd) provides medical physics services to four radiotherapy centres in NSW with a total of 6 high energy medical linear accelerators manufactured by three different companies. As part of the services, the stability of the accelerator ion chamber system is regularly examined for constancy and periodically for absolute calibration. Each accelerator ion chamber has exhibited undesirable behaviour from time to time, sometimes leading to its replacement. This presentation describes the performance of the ion chambers for some of the linacs over a period of 12-18 months and the steps taken by the manufacturer to address the problems encountered. As part of our commissioning procedure of new linacs, an absolute calibration of the accelerator output (photon and electron beams) is repeated several times over the period following examination of the physical properties of the radiation beams. These calibrations were undertaken in water using the groups calibrated ion chamber/electrometer system and were accompanied by constancy checks using an acrylic phantom and field instruments. Constancy checks were performed daily for a period of 8 weeks during the initial life of the accelerator and thereafter weekly. For one accelerator, the ion chamber was replaced 6 times in the first eighteen months of its life due to severe drifts in output, found to be due to pressure changes in one half of the chamber In another accelerator, erratic swings of 2% were observed for a period of nine months, particularly with the electron beams, before the manufacturer offered to change the chamber with another constructed from different materials. In yet another accelerator the ion chamber has shown consistent erratic behaviour, but this has not been addressed by the manufacturer. In another popular accelerator, the dosimetry was found to be very stable until some changes in the tuning were introduced resulting in small

Test of an undulated vacuum chamber for the ISR

CERN Multimedia

1975-01-01

This picture shows mechanical tests of an undulated vacuum chamber for downstream arms of ISR intersections. This chamber, made of 0.3 mm thick inconel, had inner dimensions of 150 mm by 50 mm. The deflection under vacuum is measured by dial gauges. On the left one sees the large vessel where vacuum chambers were tested at pressures above atmospheric pressure.

Radial semiconductor drift chambers

International Nuclear Information System (INIS)

Rawlings, K.J.

1987-01-01

The conditions under which the energy resolution of a radial semiconductor drift chamber based detector system becomes dominated by the step noise from the detector dark current have been investigated. To minimise the drift chamber dark current attention should be paid to carrier generation at Si/SiO 2 interfaces. This consideration conflicts with the desire to reduce the signal risetime: a higher drift field for shorter signal pulses requires a larger area of SiO 2 . Calculations for the single shaping and pseudo Gaussian passive filters indicate that for the same degree of signal risetime sensitivity in a system dominated by the step noise from the detector dark current, the pseudo Gaussian filter gives only a 3% improvement in signal/noise and 12% improvement in rate capability compared with the single shaper performance. (orig.)

Superconductor shields test chamber from ambient magnetic fields

Science.gov (United States)

Hildebrandt, A. F.

1965-01-01

Shielding a test chamber for magnetic components enables it to maintain a constant, low magnetic field. The chamber is shielded from ambient magnetic fields by a lead foil cylinder maintained in a superconducting state by liquid helium.

Investigation of thermal and temporal responses of ionization chambers in radiation dosimetry.

Science.gov (United States)

AlMasri, Hussein; Funyu, Akira; Kakinohana, Yasumasa; Murayama, Sadayuki

2012-07-01

The ionization chamber is a primary dosimeter that is used in radiation dosimetry. Generally, the ion chamber response requires temperature/pressure correction according to the ideal gas law. However, this correction does not consider the thermal volume effect of chambers. The temporal and thermal volume effects of various chambers (CC01, CC13, NACP parallel-plate, PTW) with different wall and electrode materials have been studied in a water phantom. Measurements were done after heating the water with a suitable heating system, and chambers were submerged for a sufficient time to allow for temperature equilibrium. Temporal results show that all chambers equilibrate quickly in water. The equilibration time was between 3 and 5 min for all chambers. Thermal results show that all chambers expanded in response to heating except for the PTW, which contracted. This might be explained by the differences in the volumes of all chambers and also by the difference in wall material composition of PTW from the other chambers. It was found that the smallest chamber, CC01, showed the greatest expansion. The magnitude of the expansion was ~1, 0.8, and 0.9% for CC01, CC13, and parallel-plate chambers, respectively, in the temperature range of 295-320 K. The magnitude of the detected contraction was <0.3% for PTW in the same temperature range. For absolute dosimetry, it is necessary to make corrections for the ion chamber response, especially for small ion chambers like the CC01. Otherwise, room and water phantom temperatures should remain within a close range.

Sexual behavior, depressive feelings, and suicidality among Estonian school children aged 13 to 15 years.

Science.gov (United States)

Heidmets, L; Samm, A; Sisask, M; Kõlves, K; Aasvee, K; Värnik, A

2010-01-01

The present paper is based on a WHO Collaborative Cross-National Study "Health Behavior in School-Aged Children (HBSC)." It aimed at describing and analyzing how the sexual behaviors of 13- to 15-year-old Estonian school children were associated with self-reported depressive feelings and suicidality. Distinctive behavioral traits in relation to age of first sexual intercourse were also investigated. Self-reported questionnaires from school children (n = 3,055) were analyzed. In total, 15.2% of school children reported being nonvirgin. Among 13-year-olds, 2.9% of girls and 6.8% of boys were nonvirgins. Approximately 25% of the 15-year-old girls and boys were nonvirgins. The likelihood of depressive feelings and suicidal ideation increased significantly in both genders with loss of virginity. Boys who had lost their virginity at 13 years or younger were 4.2 times more likely to have suicidal thoughts; comparable girls were 7.8 times more likely to have suicidal thoughts. Compared to virgins, youths who had lost their virginity reported poor self-assessed health and more risk behaviors in themselves and their peers. Experiences of sexual intercourse increased the odds ratios for depressive feelings and suicidality. The earlier sexual intercourse was initiated, the greater were the odds of lower mental well-being. Risk behaviors emerged as a complex phenomenon requiring complex prevention.

Design and characteristics of a scattering chamber for PIXE analysis

International Nuclear Information System (INIS)

Oliver, A.; Miranda, J.; Lopez, K.; Mercado, F.; Flores, A.H.

1989-01-01

A scattering chamber for Particle Induced x-ray Emission (PIXE) analysis is described. This chamber was designed and constructed for thin film thickness measurements and depth profiling. The chamber operation characteristics and versatility in materials analysis are shown. (Author). 18 refs, 6 figs

He leak testing of Indus-2 dipole vacuum chambers

International Nuclear Information System (INIS)

Sindal, B.K.; Bhavsar, S.T.; Shukla, S.K.

2003-01-01

Full text: Centre for Advanced Technology is developing its second synchrotron radiation source INDUS-2 which is a 2.5 GeV electron storage ring. Dipole vacuum chambers are the vital components of Indus-2 vacuum system. Each of these chambers is approx. 3.6 m long and 0.67 m wide with 24 nos. of ports of various sizes. The dipole chambers were made by machining two halves and they are then lip welded together. The dipole chamber has approx. 14 m of total weld length and it was leak tested for leak tightness of the order of 10 -10 mbar 1/s. Helium mass spectrometer leak detector (HMSLD) was utilized for the leak testing. Subsequently the leaks of various orders in welding joints were repaired and leak tightness achieved. This paper describes the experiences during leak testing of 20 nos. of aluminum dipole chambers for INDUS-2

Radiation loading effect proportional chamber on the performances

International Nuclear Information System (INIS)

Alekseev, T.D.; Kalinina, N.A.; Karpukhin, V.V.; Kruglov, V.V.; Khazins, D.M.

1980-01-01

The effect of a space charge which appears under the effect of radiation loading on counting characteristics of a proportional chamber, is experimentally investigated. Calculations are made which take into account the effect of a space charge of positive ions formed in the chamber. The investigations have been carried out on the test board which consists of a one-coordinate proportional chamber, a telescope of two scintillation counters and a collimated 90 Sr β-source. The proportional chamber has the 160x160 mm dimensions. The signal wires with the 50 μm diameter are located with the step of s=10 mm. High-voltage planes are coiled with a wire with the 100 μm diameter and a 2 mm step. The distance between high-voltage planes are 18 mm. The chamber is blown through with a gaseous mixture, its composition is 57% Ar+38% CH 4 +5% (OCH 3 ) 2 CH 2 . When carrying out measurements in wide ranges, the density of radiation loading and the amplifier threshold are changed. The experimental results show a considerable effect of radiation loading and the value of amplifier threshold on the value of a counting characteristic. This should be taken into account when estimating the performance of a proportional chamber according to board testing using radioactive sources, as conditions for investigations are usually different from those of a physical experiment on an accelerator

Klas puts imprint on 'signature piece' / Herman Trotter

Index Scriptorium Estoniae

Trotter, Herman

1996-01-01

Kontserdiarvustus. Buffalo Philharmonic Orchestra, külalisdirigent Eri Klas, solist Arie Lipsky (tšello). Kavas: D. Šostakovitš, Sümfoonia nr. 5; E. Dohnanyi, Konzertstück tšellole ja orkestrile ja W. A. Mozart, Divertisment keelpilliorkestrile, KV 136, D-duur

Measurement of radon concentration in air employing Lucas chamber

International Nuclear Information System (INIS)

Machaj, B.

1997-01-01

The results of investigations aimed to determine the main features of radon concentration gauge in air, employing 0.17 L Lucas chamber, and air sample forced by an air pump are presented. For two hour sampling and measuring cycle time the dynamic error in the worst case (first read out) equals 5 % relative to the step jump of radon concentration. This is due to the increase of activity of the decay products in the chamber. It was observed that the short lived radon decay products (Po-218, Pb-214, Bi-214) are depositing on the walls of the chamber and they are not removed by flushing the chamber with air. (author)

Construction and use of small chambers for boron trifluoride

International Nuclear Information System (INIS)

Caillat, R.; Lallemant, C.; Valladas, G.

1949-01-01

The fabrication of the chambers (the materials used, the fabrication of the parts and their assembly), and their final testing are described in a first part. Then, the preparation of crude boron fluoride, the storing of the crude, the purification of BF 3 by sublimation and condensation, the pumping, drying and filling up of the chambers, their finishing and sealing are described in a second part. The last part describes the use of the chambers for the counting of slow neutrons: amplification system, pulses discrimination and neutrons counting, accuracy. The characteristics of the amplification circuit used with the chamber are described in the appendix. (J.S.)

The performance of a hybrid spark chamber beta-ray camera

International Nuclear Information System (INIS)

Aoyama, Takahiko; Watanabe, Tamaki

1978-01-01

This paper describes the performance of a hybrid spark chamber for measuring β-ray emitting radionuclide distribution on a plane source, which was developed to improve the instability of usual self-triggering spark chambers. The chamber consists of a parallel plate spark chamber gap and a parallel plate proportional chamber gap composed of mesh electrodes in the same gas space, and is operated by flowing gas, a mixture of argon and ethanol saturated vapor at 0 0 C, continuously through it. Instability is due to the occurrence of spurious sparks not caused by incident particles and it became conspicuous in the small intensity of incident particles. The hybrid spark chamber enabled us to obtain good counting plateau, that is, good stability for especially small intensity of β-rays and even for the background by setting up gas multiplication in the proportional chamber gap moderately high. Good spatial resolution less than 1 mm was obtained for 3 H and 14 C by keeping the distance between the chamber cathode and the source less than 1 mm. In order to obtain good spatial resolution, it is desirable to keep the overvoltage as small as possible while small overvoltage results in the deterioration of the uniformity of sensitivity. It was found by theoretical estimation and experiment that for a given large overvoltage the spatial resolution was improved by increasing the gas multiplication in the proportional chamber gap. The hybrid spark chamber has a relatively long dead time. When there being a number of active spots having different activities in a detection area, the sparking efficiency of a weak active spot also decreases by large counting loss due to the total strong activity. (auth.)

Development of a sample chamber for micro-PIXE

International Nuclear Information System (INIS)

Kurosawa, M.; Sueno, S.; Shima, K.; Ohshima, H.; Ishii, H.; Kamiya, H.; Kimoto, S.

1997-01-01

A new sample chamber for micro-PIXE analysis of geological thick samples has been successfully developed. A target in the sample chamber is normal to the beam and Si(Li) detectors are located at 135deg to the beam direction. For the sample observation, a normal viewing optics with the optical axis collinear with the beam is achieved by a combination of long working distance microscope and mirror with a central hole for the beam transmission. The normal incidence beam and normal viewing are essential to raise a spatial resolution of the thick target analysis. In addition, the sample chamber has fulfilled ten requirements as for material, driving stage, X-ray absorbers, space for another detector, etc. The information obtained by the development can give a new guide to manufacture the sample chamber for the micro-PIXE. (author)

Mini-chamber, an advanced protection concept for NIF

International Nuclear Information System (INIS)

Peterson, P.F.; Scott, J.M.

1996-01-01

Inertial confinement fusion (ICF) target debris and ablated near-target materials pose the primary threat to the National Ignition Facility (NIF) final optics debris shields, as well as a major challenge in future inertial fusion energy (IFE) power plants. This work discusses a NIF 'mini-chamber,' designed to mitigate the debris threat. Although the NIF base-line design protects against debris using a frost-protected target positioner and refractory first-wall coatings, the mini-chamber provides important flexibility in three areas: debris-shield protection from beyond-design basis shots (i.e. heavy hohlraums, special diagnostics, shields); fielding of large experiments with significant surface ablation; and studying key ablation and gas-dynamics issues for liquid-wall IFE power plants. Key mini-chamber modeling results are presented, followed by discussion of equipment requirements for fielding a NIF mini-chamber. 7 refs., 3 figs

A high-efficiency acoustic chamber and the anomalous sample rotation

Science.gov (United States)

Wang, Taylor G.; Allen, J. L.

1992-01-01

A high efficiency acoustic chamber for the levitation and manipulation of liquid or molten samples in a microgravity environment has been developed. The chamber uses two acoustic drivers that are mounted at opposite corners of the chamber; by driving these at the same frequency, with 18-deg phase shifts, an increase in force of a factor of 3-4 is obtainable relative to the force of a single-driver system that is operated at the same power level. This enhancement is due to the increased coupling between the sound driver and the chamber. An anomalous rotation is noted to be associated with the chamber; this is found to be eliminated by a physically as-yet inexplicable empirical solution.

Calibration of ionization chambers used in LDR brachytherapy

International Nuclear Information System (INIS)

Alvarez, Oscar T.B.; Caldas, Linda V.E.

2005-01-01

In this work was developed a calibration procedure of well-type ionization chambers used for measurements of I-125, seed type. It was used as a standard an ionization chamber Capintec CRC-15BT, with calibration certificate of the University of Wisconsin. It were calibrated two well-type ionization chambers of Capintec CRC-15R model. A source of I-125 was used in clinical use (18.5 to 7.4 MBq). The results showed that with the application of calibration factors was possible to decrease read deviate from 16% to just 1.0%

The cloud chamber. A wonderful instrument for discoveries

International Nuclear Information System (INIS)

Fadel, Kamil

2012-01-01

The author proposes an overview of the various applications and discoveries based on the use of the cloud chamber or Wilson chamber: blood flow rate measurements, investigation of alpha radiation (interaction of an alpha particle with gas atoms), investigation of beta radioactivity with the evidence of the existence of the neutrino, confirmation of a relativistic effect, discovery of the neutron in the 1930's, uranium fission, evidence of the cosmic origin of a ionizing radiation in the 1930's. The author briefly evokes the technological evolutions of these cloud chambers

Cardiac chamber scintiscanning

International Nuclear Information System (INIS)

Goretzki, G.

1981-01-01

The two methods of cardiac chamber scintiscanning, i.e. 'first pass' and 'ECG-triggered' examinations, are explained and compared. Two tables indicate the most significant radiation doses of the applied radio tracers, i.e. 99m-Tc-pertechnetate and 99m-Tc-HSA, to which a patient is exposed. These averaged values are calculated from various data given in specialised literature. On the basis of data given in literature, an effective half-life of approximately 5 hours in the intravascular space was calculated for the erythrocytes labelled with technetium 99m. On this basis, the radiation doses for the patients due to 99m-Tc-labelled erythrocytes are estimated. The advantages and disadvantages of the two methods applied for cardiac chamber scintiscanning are put into contrast and compared with the advantages and disadvantages of the quantitative X-ray cardiography of the left heart. The still existing problems connected with the assessment of ECG-triggered images are discussed in detail. The author performed investigations of his own, which concerned the above-mentioned problems. (orig./MG) [de

The role of Chamber of Commerce System in international economic relations

Directory of Open Access Journals (Sweden)

Diana Ramona Popescu

2016-12-01

Full Text Available The article focuses on the analysis of chambers of commerce and industry, non-governmental organizations, fully committed to stimulating economic initiative and increase business competitiveness. The objective of the paper is to highlight the instruments and means through which the chambers of commerce and industry provide support for the development and promotion of business and their ability to settle trade disputes. In the first part of the article are presented the characteristics and functions of chambers, organizations that support the development of international trade. Although the role of chambers of commerce and industry is essentially the same, they behave national and regional specific features. The second part advance the chamber means for promoting international trade through concrete examples based on analyzing actions of chambers of commerce and industry. The article ends with an assessment of the actual situation of the county chambers of commerce and industry in Romania, obtained after a personal research. The survey is structured around two major themes: chamber system in Romania and the Romanian business environment.

Absorbed dose calibration factors for parallel-plate chambers in high energy photon beams

International Nuclear Information System (INIS)

McEwen, M.R.; Duane, S.; Thomas, R.A.S.

2002-01-01

An investigation was carried out into the performance of parallel-plate chambers in 60 Co and MV photon beams. The aim was to derive calibration factors, investigate chamber-to-chamber variability and provide much-needed information on the use of parallel-plate chambers in high-energy X-ray beams. A set of NE2561/NE2611 reference chambers, calibrated against the primary standard graphite calorimeter is used for the dissemination of absorbed dose to water. The parallel-plate chambers were calibrated by comparison with the NPL reference chambers in a water phantom. Two types of parallel-plate chamber were investigated - the NACP -02 and Roos and measurements were made at 60 C0 and 6 linac photon energies (6-19 MV). Calibration factors were derived together with polarity corrections. The standard uncertainty in the calibration of a chamber in terms of absorbed dose to water is estimated to be ±0.75%. The results of the polarity measurements were somewhat confusing. One would expect the correction to be small and previous measurements in electron beams have indicated that there is little variation between chambers of these types. However, some chambers gave unexpectedly large polarity corrections, up to 0.8%. By contrast the measured polarity correction for a NE2611 chamber was less than 0.13% at all energies. The reason for these large polarity corrections is not clear, but experimental error and linac variations have been ruled out. By combining the calibration data for the different chambers it was possible to obtain experimental k Q factors for the two chamber types. It would appear from the data that the variations between chambers of the same type are random and one can therefore define a generic curve for each chamber type. These are presented in Figure 1, together with equivalent data for two cylindrical chamber types - NE2561/NE2611 and NE2571. As can be seen, there is a clear difference between the curves for the cylindrical chambers and those for the

Laboratory Course on Drift Chambers

International Nuclear Information System (INIS)

Garcia-Ferreira, Ix-B.; Garcia-Herrera, J.; Villasenor, L.

2006-01-01

Drift chambers play an important role in particle physics experiments as tracking detectors. We started this laboratory course with a brief review of the theoretical background and then moved on to the the experimental setup which consisted of a single-sided, single-cell drift chamber. We also used a plastic scintillator paddle, standard P-10 gas mixture (90% Ar, 10% CH4) and a collimated 90Sr source. During the laboratory session the students performend measurements of the following quantities: a) drift velocities and their variations as function of the drift field; b) gas gains and c) diffusion of electrons as they drifted in the gas

Holographic processing of track chamber data

Energy Technology Data Exchange (ETDEWEB)

Bykovsky, Y A; Larkin, A I; Markilov, A A; Starikov, S N [Moskovskij Fiziko-Tekhnicheskij Inst. (USSR)

1975-12-01

The holographic pattern recognition method was applied for processing of track chamber photographs. Experiments on detection of such events as a definitely directed track, an angle formed by two tracks, a three-pronged star, a definitely curved track were performed by using models. It is proposed to recognize these events in a filmshot by the shape of correlation signals. The experiment to recognize the event in a real bubble chamber filmshot was realized; requirements to the processing films were determined.

78 FR 76750 - Drawbridge Operation Regulation; Chambers Creek, Steilacoom, WA

Science.gov (United States)

2013-12-19

... operating schedule that governs the Burlington Northern Santa Fe (BNSF) Chambers Creek Railway Bridge across... performing lift bridge maintenance and upgrades for the BNSF Chambers Creek Railway Bridge across Chambers... maintenance and upgrade items to this vertical lift bridge in support of Positive Train Control requirements...

A closed unventilated chamber for the measurement of transepidermal water loss.

Science.gov (United States)

Nuutinen, Jouni; Alanen, Esko; Autio, Pekka; Lahtinen, Marjo-Riitta; Harvima, Ilkka; Lahtinen, Tapani

2003-05-01

Open chamber systems for measuring transepidermal water loss (TEWL) have limitations related to ambient and body-induced airflows near the probe, probe size, measurement sites and angles, and measurement range. The aim of the present investigation was to develop a closed chamber system for the TEWL measurement without significant blocking of normal evaporation through the skin. Additionally, in order to use the evaporimeter to measure evaporation rates through other biological and non-biological specimens and in the field applications, a small portable, battery-operated device was a design criteria. A closed unventilated chamber (inner volume 2.0 cm(3) was constructed. For the skin measurement, the chamber with one side open (open surface area 1.0 cm(2) is placed on the skin. The skin application time was investigated at low and high evaporation rates in order to assess the blocking effect of the chamber on normal evaporation. From the rising linear part of the relative humidity (RH) in the chamber the slope was registered. The slope was calibrated into a TEWL value by evaporating water at different temperatures and measuring the water loss of heated samples with a laboratory scale. The closed chamber evaporation technique was compared with a conventional evaporimeter based on an open chamber method (DermaLab), Cortex Technology, Hadsund, Denmark). The reproducibility of the closed chamber method was measured with the water samples and with volar forearm and palm of the hand in 10 healthy volunteers. The skin application time varied between 7 and 9 s and the linear slope region between 3 and 5 s at the evaporation rates of 3-220 g/m(2) h. A correlation coefficient between the TEWL value from the closed chamber measurements and the readings of the laboratory scale was 0.99 (P measurements with the water samples was 4.0% at the evaporation rate of 40 g/m(2) h. A correlation coefficient of the TEWL values between the closed chamber and open chamber measurements was 0

Modelling auto ignition of hydrogen in a jet ignition pre-chamber

Energy Technology Data Exchange (ETDEWEB)

Boretti, Alberto A. [School of Science and Engineering, University of Ballarat, PO Box 663, Ballarat, Victoria 3353 (Australia)

2010-04-15

Spark-less jet ignition pre-chambers are enablers of high efficiencies and load control by quantity of fuel injected when coupled with direct injection of main chamber fuel, thus permitting always lean burn bulk stratified combustion. Towards the end of the compression stroke, a small quantity of hydrogen is injected within the pre-chamber, where it mixes with the air entering from the main chamber. Combustion of the air and fuel mixture then starts within the pre-chamber because of the high temperature of the hot glow plug, and then jets of partially combusted hot gases enter the main chamber igniting there in the bulk, over multiple ignition points, lean stratified mixtures of air and fuel. The paper describes the operation of the spark-less jet ignition pre-chamber coupling CFD and CAE engine simulations to allow component selection and engine performance evaluation. (author)