Estonian Air valmistub odavate piletitega EasyJeti tulekuks / Erkki Erilaid

Index Scriptorium Estoniae

Erilaid, Erkki

2004-01-01

Estonian Air pidi langetama piletihindu Berliini ja Londoni liinil kolmandiku võrra, kuna oktoobri lõpust hakkab Tallinna lennujaamast reise tegema uus odavlennufirma Easy-Jet. Lisa: Estonian Airi hinnad internetis

Estonian Airi president : uus äristrateegia toob ettevõttele edu / Borge Thornbech ; interv. Andres Reimer

Index Scriptorium Estoniae

Thornbech, Borge

2007-01-01

Estonian Air asutas regionaalsete lendude korraldamiseks ettevõtte Estonian Air Regional, idee on arendada tegevust lühidistantsidel ja luua ühenduslüli lennukompanii Euroopa-liinide vahel. Kommenteerivad Olev Schults, Oleg Harlamov, Rein Mark. Vt. samas: Kõik aktsionärid vannuvad Estonian Airile truudust; Estonian Air kaalub Tartu lennuliini avamist. Kaart: Reisijate jagunemine sihtkohtade vahel. Graafikud: Estonian Air kukkus kahjumisse

The Relieving Effects of BrainPower Advanced, a Dietary Supplement, in Older Adults with Subjective Memory Complaints: A Randomized, Double-Blind, Placebo-Controlled Trial

OpenAIRE

Zhu, Jingfen; Shi, Rong; Chen, Su; Dai, Lihua; Shen, Tian; Feng, Yi; Gu, Pingping; Shariff, Mina; Nguyen, Tuong; Ye, Yeats; Rao, Jianyu; Xing, Guoqiang

2016-01-01

Subjective memory complaints (SMCs) are common in older adults that can often predict further cognitive impairment. No proven effective agents are available for SMCs. The effect of BrainPower Advanced, a dietary supplement consisting of herbal extracts, nutrients, and vitamins, was evaluated in 98 volunteers with SMCs, averaging 67 years of age (47?88), in a randomized, double-blind, placebo-controlled trial. Subjective hypomnesis/memory loss (SML) and attention/concentration deficits (SAD) w...

SAS tahab Estonian Airi liita lätlaste firmaga airBaltic / Andres Eilart

Index Scriptorium Estoniae

Eilart, Andres

2007-01-01

SAS plaanib Estonian Airi ja Läti firma airBalticu liitmisega luua uue lennufirma. Autori hinnangul viitavad Estonian Airi laienemisplaanidele kriipsu peale tõmbamine ja SAS-i investeeringud airBalticusse sellele, et ühendamise käigus "neelab" Läti firma Estonian Airi

Stocks of organic carbon in Estonian soils

Directory of Open Access Journals (Sweden)

Kõlli, Raimo

2009-06-01

Full Text Available The soil organic carbon (SOC stocks (Mg ha–1 ofautomorphic mineral (9 soil groups, hydromorphic mineral (7, and lowland organic soils (4 are given for the soil cover or solum layer as a whole and also for its epipedon (topsoil layer. The SOC stocks for forest, arable lands, and grasslands and for the entire Estonian soil cover were calculated on the basis of the mean SOC stock and distribution area of the respective soil type. In the Estonian soil cover (42 400 km2, a total of 593.8 ± 36.9 Tg of SOC is retained, with 64.9% (385.3 ± 27.5 Tg in the epipedon layer (O, H, and A horizons and 35.1% in the subsoil (B and E horizons. The pedo-ecological regularities of SOC retention in soils are analysed against the background of the Estonian soil ordination net.

Estonian horticultural peat marketing: sales promotion and price formation. 2. part

International Nuclear Information System (INIS)

Hammer, Hele

1999-01-01

When forming prices, Estonian peat companies' decisions should be based on marginal cost analysis. Unfortunately most Estonian companies sell peat to intermediaries and cannot influence its price. Estonian peat producers have to choose between either selling peat directly or selling through a central marketing organization. Both systems have their pros and cons. Direct selling gives more freedom to individual producers but is more risky. Central marketing makes cost saving possible and is more effective and stable, but may alienate producers from clients and markets. Whichever marketing system Estonian peat companies choose, the most important elements in their marketing strategy should be: careful market analysis, personal sales, attending trade shows, catalogues, quality service and offering transportation services. (author)

Transformational Leadership in the Estonian Defence Forces

Directory of Open Access Journals (Sweden)

Antek Kasemaa

2015-06-01

Full Text Available Purpose – The study is a contribution to the validation of the 15 items and 5 subscales Transformational Leadership Scale (TLS proposed by Rafferty and Griffin (2004. Design/methodology/approach – The sample includes participants from different levels of the Estonian Defence Forces (EDF military hierarchy (N=2570. The structure of the TLS was examined by using exploratory and confirmatory factor analyses. Additionally ANOVA was used to compare the results between different subsamples. Findings – TLS showed satisfactory reliability. Confirmatory factor analyses found TLS as valid five dimensions instrument to measure transformational leadership in the Estonian military context. Different management levels showed different emphases among the dimensions of transformational leadership. Research and practical limitations/implications – TLS will be an important tool to use in transformational leadership research in the Estonian military context and beyond. Additionally, the current research contributes to the development of alternative measurement tools besides the most commonly used MLQ. The limitation of the work will be the rather homogenous sample from the Estonian military, however it will open the door for the subsequent research using different samplings. Originality/value – The current research found TLS to be a reliable and valid instrument, very short and therefore easy to administrate, having the possibility to use it with five dimensional and as one general transformational instrument as well.

Uniting the Divided Continent. The Estonian National Committee of the European Movement

Directory of Open Access Journals (Sweden)

Pauli Heikkilä

2010-12-01

Full Text Available The article examines the exiled Estonian politicians in the European Movement in the early Cold War period. The ultimate goal of exiled Estonians was to restore their state’s independence. In order to promote this, Estonian leaders sought connections with Western leaders. The European Movement was the only organisation involving actors from both the East and the West, and this corresponded to the Estonian discourse on Europe as a whole. Therefore, the European Movement was appreciated, although its limited opportunities for decisive actions were also recognised. East and West European interest in the European Movement declined as West European integration rapidly intensified through the European Coal and Steel Community (ECSC and particularly after the January 1952 Eastern European Conference in London. By 1957, disappointment in the inability of European unification to help regain Estonian independence became evident.

Estonian Airi uued soodsad pakkumised

Index Scriptorium Estoniae

2010-01-01

Estonian Airi kodulehelt on võimalik osta lennupileteid koostööpartnerite poolt pakutavatele mandritevahelistele lendudele ning broneerida internetis hotellituba Euroopa suurima hotelli broneerimise teenust pakkuva ettevõtte Booking.com kaudu

Cresco sai lahti võlast SASile ja osalusest Estonian Airis / Rivo Sarapik, Alyona Stadnik

Index Scriptorium Estoniae

Sarapik, Rivo, 1981-

2010-01-01

Majandus- ja kommunikatsiooniminister Juhan Parts ning SAS-i asepresident Benny Zakrisson kirjutasid alla Estonian Airi ostu-müügitehingule. Investeerimispank Cresco, millele kuulus 17% Estonian Airist, jääb välja Estonian Airi omanikeringist ning SAS-i nõue Crescole tühistatakse

On the System of Place Name Signs in Estonian Sign Language

Directory of Open Access Journals (Sweden)

Liina Paales

2011-05-01

Full Text Available A place name sign is a linguistic-cultural marker that includes both memory and landscape. The author regards toponymic signs in Estonian Sign Language as representations of images held by the Estonian Deaf community: they reflect the geographical place, the period, the relationships of the Deaf community with hearing community, and the common and distinguishing features of the two cultures perceived by community's members. Name signs represent an element of signlore, which includes various types of creative linguistic play. There are stories hidden behind the place name signs that reveal the etymological origin of place name signs and reflect the community's memory. The purpose of this article is twofold. Firstly, it aims to introduce Estonian place name signs as Deaf signlore forms, analyse their structure and specify the main formation methods. Secondly, it interprets place-denoting signs in the light of understanding the foundations of Estonian Sign Language, Estonian Deaf education and education history, the traditions of local Deaf communities, and also of the cultural and local traditions of the dominant hearing communities. Both perspectives - linguistic and folkloristic - are represented in the current article.

The Representation of the Cold War in Three Estonian History Textbooks

Science.gov (United States)

Korbits, Keit

2015-01-01

The article looks at the discursive strategies different Estonian history textbooks employ to represent the Cold War period, and the "commonsense" ideologies instilled through these representations. The textbooks analysed include two history books dating back to the Estonian Soviet Socialist Republic and, for contrast, one written during…

Estonian Language of Technology as a Factor Supporting the Evolution of Engineering Thinking

Directory of Open Access Journals (Sweden)

Mägi, Vahur

2013-03-01

Full Text Available Casual mention of teaching technology subjects in Estonian schools dates back several centuries. Navigation and construction were amongthe earliest professional skills that were taught. As both of them required mathematical thinking skills, teaching the subjects was usually accompanied by explaining the principles of mathematics. The first technology book in Estonian was published about two centuries ago and it dealed with geodesy. The earliest Estonian glossaries of technological terminology were published in the fields of physics and chemistry. The rise of Estonian as a language of higher education and science in the country came about in the 1920s and 1930s. Faculty members of the Tallinn School of Technology then published the first textbooks composed in the Estonian language for students of technology. The Estonian Society for Technology and the Estonian Association of Engineers became seriously involved in linguistic activities. Together with the Vocational Teachers’ Assembly of Tartu they published an illustrated technology glossary for machinery and tools terms. It was followed by a glossary of construction and building terms, compiled under the lead of the University of Technology. In addition, journals of technology introducedinnovations in the lexicon of technology to the general public. The postwar period in the development of the lexicon of technical terms was of little significance at first. A surge in language creativity could be detected in the 1960s, when terminology became a target of constantly growing attention to the development of technology lexicon. Series of technology glossaries were published. This tendency has continued to this day.

Estonian Tax Structure

Directory of Open Access Journals (Sweden)

Viktor Trasberg

2014-08-01

Full Text Available The paper analyses Estonian tax structure changes during the last decade and critically assesses the current situation. The country’s tax mix is rather unique among EU countries – it has one of the highest proportions of consumption taxes in total taxes and the lowest level of capital and profit taxes. Such an unbalanced tax structure creates risks for public finances, limits revenue collection and distorts the business environment.

Estonian Golf & Country Club / Urmas Oja

Index Scriptorium Estoniae

Oja, Urmas, 1981-2012

2005-01-01

Konkursil "Eesti parim puitehitis 2005" pälvis voodrilaua eripreemia Jõelähtme Estonian Golf & Country Club'i katus. Arhitekt Andres Siim. Sisearhitekt Juta Lember. Konstruktor: AS Resand. 11 värv. ill

Estonian Air / Kirsti Vainküla

Index Scriptorium Estoniae

Vainküla, Kirsti, 1972-

2004-01-01

Estonian Air reklaamib end Taani linna Aalborgi raadiojaama ilmateates. Lennukompanii pressiesindaja Epp Alatalu sõnul on firma Taanis reklaamimise põhjus see, et liinil Tallinn-Kopenhaagen sõitjate hulgas ei ole peaaegu üldse taanlasi

Noor eesti teater ja Noor-Eesti. Young Estonian Theatre and Young Estonia

Directory of Open Access Journals (Sweden)

Katri Aaslav-Tepandi

2012-04-01

Full Text Available This article begins by examining points of intersection between two professional theatres, ”Estonia” and ”Vanemuine” (both established in 1906, their young directors – Karl Menning, Paul Pinna, Theodor Altermann, and Karl Jungholz, and the literary movement Young Estonia. Subsequently, we will consider Young Estonia’s theatrical ideals and the influence of these ideas on later Estonian theatrical life. Since not much information has survived regarding direct personal contacts between ”movers and shakers” in the theatre world and Young Estonians, the main focus here shall be on indirect creative connections and influences. One such context is education: like the Young Estonians, theatre activists of the younger generation aspired to place themselves on the larger map of European culture. Thus, their artistic beliefs and goals shall be examined in relation to those of Young Estonians’ quest for modern culture. Pinna, Altermann, Menning, Jungholz, and others went on study tours to Germany and France, where they were energized and inspired by innovative German and Russian theatres, by naturalistic staging, and by psychological realism, both in acting and in performance style. Among their models were A. Antoine’s Théâtre- Libre in Paris, K. Stanislavski’s Art Theatre in Moscow, O. Brahm’s Lessing-Theater, and M. Reinhardt’s Deutsches Theater in Berlin. These models were likewise known to the Young Estonians, but if theatre activists oriented themselves more fundamentally to German naturalist and realist dramatic art, Young Estonians were more taken with ”theatrical theatre” with its symbolist and impressionist influences. The Young Estonians attended performances at both theatres, ”Vanemuine” and ”Estonia”, and wrote numerous theatre reviews. Yet in the Young Estonia albums (yearbooks and in the magazine Young Estonia, theatre topics have a relatively modest representation. Young Estonians did not have direct

Liberalism - Key to Entrepreneurial and Innovation Success: Estonian Case Study

Directory of Open Access Journals (Sweden)

Augustin Ignatov

2017-12-01

Full Text Available Since its independence in 1991 Estonia has successfully overpassed the challenges of the transition period being in the present of one the most technologically developed nations of Europe. The present research is intended to evaluate the relationship between Estonian pro-market regulation, entrepreneurship and innovation. In order to reach relevant conclusions in this regard there have been used both qualitative and quantitative methods of analysis. In such a way, it could be comprehensively reviewed the process of Estonian economic development from a relatively underdeveloped USSR republic to an advanced innovation driven economy. The results show that pro-market governmental regulation has favourably influenced Estonian entrepreneurship, while it fostered country’s innovation capacities. It has been concluded that the economic “miracle” of Estonia has been at a great extent determined by proper government regulation oriented towards economic liberalisation.

Efficiency of Estonian grain farms in 2000 2004

Directory of Open Access Journals (Sweden)

N. VASILIEV

2008-12-01

Full Text Available The aim of this study is to analyse the efficiency of Estonian grain farms after Estonia’s transition to a market economy and during the accession period to the European Union (EU. The non-parametric method Data Envelopment Analysis (DEA was used to estimate the total technical, pure technical and scale efficiency of Estonian grain farms in 2000–2004. Mean total technical efficiency varied from 0.70 to 0.78. Of the grain farms 62% are operating under increasing returns to scale. Solely based on the DEA model it is not possible to determine optimum farm scale and the range of Estonian farm sizes operating efficiently is extensive. The most pure technically efficient farms were the smallest and the largest but the productivity of small farms is low compared to larger farms because of their small scale. Therefore, they are the least competitive. Since pre-accession period to the EU, large input slacks of capital have replaced the former excessive use of labour and land. This raises the question about the effects on efficiency of the EU’s investment support schemes in new member states.;

The Estonian national program for sustainable resource development and its connection with teaching about fossil fuels in chemistry courses

International Nuclear Information System (INIS)

Karik, H.

1996-01-01

The conception of sustainable resource development worked out under the initiative of the United Nations (UN) actualizes ideas for improving the health of people and the environment. The needs of people are to he addressed and, simultaneously, natural resources preserved. That is ,why ecological and economic expenses are to he integrated and flow sheets of industrial plants are to be reorganized in order to utilize natural resources in a rational way. The association of Estonia with the resolution of the UN Conference on Environmental Development held in Rio de Janeiro and the resolution of the Estonian Parliament concerning The National Program of Sustainable Development require changes in our lifestyle. Chemical education in schools has to support a change in the way of thinking and many concrete subjects can be connected with the problems of sustainable development. Metallic elements get into the environment mostly with fuel combustion ashes. According to various prognoses, fossil fuel resources will last for a thousand years. This means that more and more metallic compounds are thrown into the environment. Dispersion of metals in the air, water bodies and soil is continuously increasing. Finally, they reach the food chain and to the human body. As a result, toxicosis, illnesses, and inadvisable dislocations in organic life may occur. The trend to use ash as a raw material for metal production is considered to have some prospective economically attractive application. This would be one possible way of sustainable resource development to avoid the increase of environmental pollution and increase production of the corresponding metals

The Category of Time in Fairy Tales: Searching for Folk Calendar Time in the Estonian Fairy Tale Corpus

Directory of Open Access Journals (Sweden)

Mairi Kaasik

2011-03-01

Full Text Available The article examines how folk calendar holidays are represented in Estonian fairy tales. It introduces some views presented in folklore studies about the concept of time in fairy tales and finds parallels with them in the Estonian context. The analysis relies on the digital corpus of Estonian fairy tales (5400 variants, created from the texts found in the Estonian Folklore Archives by the Fairy Tale Project of the Department of Estonian and Comparative Folklore, University of Tartu. Folk calendar holidays occur in Estonian fairy tales relatively seldom; most often these are holidays that occupy a significant place in the Estonian folk calendar (Christmas, St. John’s Day, Easter, St. George’s Day. Calendar holidays are notably mentioned more often in tale types which remain on the borderline between the fairy tale and the legend or the fairy tale and the religious tale. In Estonian fairy tales, calendar holidays are used on three levels of meaning: (1 the holiday is organically associated with the tale type; it has an essential role in the plot of the tale; (2 to a certain extent, the holiday could be replaced by another holiday having an analogous meaning; (3 the holiday forms an unimportant or occasional addition to the tale.

Olev Schults : SAS vajab Estonian Airi rahvusliku lennufirmana / Olev Schults ; interv. Andres Reimer

Index Scriptorium Estoniae

Schults, Olev

2008-01-01

Estonian Airi nõukogu esimees vastab küsimustele, kas SAS arendas Läti airBalticut Estonian SAS-i arvel, mis mõte on rahvuslikul lennukompaniil, kui riik ei tohi seda finantseerida, kuidas mõjutab investorite meeleolu SAS-i Eestis tabanud poliitikute kriitika tulv

Estonian Air to overhaul strategy / Matt Withers

Index Scriptorium Estoniae

Withers, Matt

2008-01-01

Estonian Air on majanduslikes raskustes, mida aitaks leevendada riigipoolne toetus. Majandus- ja kommunikatsiooniminister Juhan Parts leiab, et riik peaks omama lennufirma juhatuses esimehe kohta, et mõjutada rohkem vastuvõetavaid otsuseid ja investeeringuid

Resource and utilization of Estonian hydropower

International Nuclear Information System (INIS)

Raesaar, P.

2005-01-01

An overview of the Estonian hydropower resources and their utilization at present as well as prospective for the future are presented in this paper. A short overview of advantages of small hydropower stations and related issues is given. Some technological aspects are treated briefly. (authors)

Revisiting the Estonian Cyber Attacks: Digital Threats and Multinational Responses

Directory of Open Access Journals (Sweden)

Stephen Herzog

2011-01-01

Full Text Available In April 2007, the Estonian Government moved a memorial commemorating the Soviet liberation of the country from the Nazis to a less prominent and visible location in Tallinn. This decision triggered rioting among Russian-speaking minorities and cyber terrorism targeting Estonia's critical economic and political infrastructure. Drawing upon the Estonian cyber attacks, this article argues that globalization and the Internet have enabled transnational groups—such as the Russian diaspora—to avenge their grievances by threatening the sovereignty of nation-states in cyberspace. Sophisticated and virtually untraceable political "hacktivists" may now possess the ability to disrupt or destroy government operations, banking transactions, city power grids, and even military weapon systems. Fortunately, western countries banded together to effectively combat the Estonian cyber attacks and minimize their effects. However, this article concludes that in the age of globalization, interdependence, and digital interconnectedness, nation-states must engage in increased cooperative cyber-defense activities to counter and prevent devastating Internet attacks and their implications.

Compiling the Dictionary of Word Associations in Estonian: From scratch to the database

Directory of Open Access Journals (Sweden)

Ene Vainik

2018-04-01

Full Text Available The present paper describes the project titled “The Dictionary of Word Associations in Estonian” undertaken by the author at the Institute of the Estonian Language. The general aim of the Dictionary is to provide insights into Estonians’ common-sense mind. It is meant to be a tool of self-reflection for Estonian native speakers and a guide for the foreigners who are eager enough to make themselves familiar with the Estonian cultural patterns of thought. The Dictionary will be published online. The number of keywords was initially limited to approximately 800. Specific emphasis is given to the stage of data collection by implementing the principles of citizen science.

Valued Estonian Music CDs / Igor Garshnek

Index Scriptorium Estoniae

Garšnek, Igor, 1958-

2003-01-01

2002. aastal välja antud eesti muusika heliplaatidest Arvo Pärt "Summa", Lepo Sumera "Chamber Music", "Baltic Voices 1.", "Sequenzen - Europäische Orgelmusik des 20. Jahrhundrets mit...", "El silenco ئ Silence. Kuldar and Marje Sink. Songs of Mother and Son", "Riho Sibul. Estonian Dream Big Band", "Rull's Royce ئ Rull's Choice"

Estonian Air püüdis viimase hetkeni Top Toursi päästa / Mirko Ojakivi

Index Scriptorium Estoniae

Ojakivi, Mirko

2010-01-01

Estonian Air kaalus Top Toursile appiminekut, sest reisifirma oli Estonian Airil üks olulisemaid koostööpartnereid. Abi oleks puudutanud ennekõike uutele lendudele allahindluse tegemist, räägiti ka võimalikust krediidist

Jäätmetega kimpus Estonian Cell annab muda põldudele kompostiks / Ulvar Käärt

Index Scriptorium Estoniae

Käärt, Ulvar, 1982-

2007-01-01

Kundas asuv Estonian Celli tehas jagab ümberkaudsetele talunikele jäätmetest lahtisaamiseks kompostimissegu. Seadused ei sätesta, kuidas Estonian Cellis tekkivaid jäätmeid töödelda. Kommenteerib Peeter Eek: Aasta läbi ei saa muda põllule viia

The Woman as Wolf (AT 409: Some Interpretations of a Very Estonian Folk Tale

Directory of Open Access Journals (Sweden)

Merili Metsvahi

2013-12-01

Full Text Available The article analyses tale type The Woman as Wolf, which is one of the most popular folk tales in the Estonian Folklore Archives and is represented there both in the form of a fairy tale and in the form of a legend. The vast majority of the versions of The Woman as Wolf were written down in the first part of the 20th century within Estonia and where recorded from Estonians. The article introduces the content of the tale, the origin of the first records from the early 19th century, and the dissemination area of the tale, which remains outside Western Europe: apart from the Estonian versions there are Sami, Karelian, Vepsian, Livonian, Latvian, Lithuanian, Russian, Ukrainian and Belarusian versions. While in almost all the Estonian versions the main protagonist is transformed into a wolf, in most of the versions written down in other areas and ethnic groups, another animal or bird replaces the wolf. The author is of the opinion that the Finnic area is central to the distribution of the folk tale The Woman as Wolf. The animal the woman is transformed into in the plot would not have been a wolf in earlier times. The article provides an explanation why the wolf is predominant in Estonian written sources. For that purpose the ways in which the wolf and werewolf were perceived in earlier Estonian folk belief are introduced. At the end of the article interpretation of the folk tale is provided. The author states that the plot and some of the motifs found in this folk tale reflect the difficulties women had in submitting to the norms and values of patriarchal order within their society.

Estonian Golf & Country Club / Liina Jänes

Index Scriptorium Estoniae

Jänes, Liina, 1977-

2005-01-01

Estonian Golf & Country Club'i etnomodernistlik golfikeskus ja klubihoone Jõelähtmel. Projekteerija: Arhitektuuristuudio Siim & Kreis. Autor Andres Siim. Konstruktor: Resand. Sisekujundaja Juta Lember (SAB Lember & Padar). Projekt 2004, valmis 2005. Ill.: I ja II korruse plaan, 3 värv. välis ja 3 sisevaadet

Critical Success Factors and information needs in Estonian industry

Directory of Open Access Journals (Sweden)

Aiki Tibar

2002-01-01

Full Text Available The article reports the results of the study on the critical success factors and related information needs in Estonian industry conducted in 1999. Data were collected by interviews with 27 managers and engineers from 16 manufacturing companies in various industries. Most of the critical success factors taken up were related to marketing, information management, quality management, product development and technological innovations. The information needs of managers and engineers were related to competitors, customers, markets, technology, regulations, etc. Some identified CSFs expressed also priorities for development by Estonian economic authorities: to support the implementation of new technologies and introduction of quality management methods. The finding that information management was perceived as a very critical area supports the result of the recent Finnish study on CSFs.

Estonian Perceptions of Security: Not Only About Russia and the Refugees

Directory of Open Access Journals (Sweden)

Veebel Viljar

2016-12-01

Full Text Available The current study focuses on the Estonian perceptions of security and on the defence situation both globally and locally. The dynamic results of the public opinion surveys on security risks conducted in Estonia over the last 10 years (2006-2016 will be presented. In addition, to understand whether some of the security risks could be over- or underestimated in Estonia, these results will be compared with the views expressed recently by the World Economic Forum, particularly the Global Risks Report 2016. Also, the arguments why some topics have played or are currently playing key role in the Estonian security perception will be presented and discussed.

The Rocky Road towards Professional Autonomy: The Estonian Journalists’ Organization in the Political Turmoil of the 20th Century

Directory of Open Access Journals (Sweden)

Epp Lauk

2017-09-01

Full Text Available This article attempts to explain the relationships between journalists, politics and the state from the perspective of collective autonomy, that of the professional organization of journalists. The case of Estonian Journalists’ Union demonstrates the complexity and historical contingency of professional autonomy of journalism. The development of the Estonian journalists’ organization occurred as a sequence of transformations from the Estonian Journalists’ Association to the Estonian Journalists’ Union to the Soviet type journalists’ union, and lastly to an independent trade union. This sequence was disrupted by several fatal breakdowns that changed not only the character of the association, but also professional values, the whole occupational ideology and the conditions of the existence of journalism as a profession in Estonia.

The Estonian study of Chernobyl cleanup workers. I. Introduction

International Nuclear Information System (INIS)

Rahu, Mati

1999-01-01

The most comprehensive epidemiological project ever performed in Estonia - The Estonian Study of Chernobyl Cleanup Workers - was the joint effort of researchers from Estonia, Finland and USA. Until September 1999, the results of this study were published in English only. To familiarize the readership of 'Eesti Arst' with the major study findings, the abridged versions of four original papers from 'Radiation Research' are presented in the current issue of the journal. For the Estonian epidemiologists, the work under this project that consists of eight sub projects was a real challenge. In the course of the study, skills were developed in writing a study protocol, preparing a questionnaire, progress reporting, documenting the structure of databases, record linkage, and problem solving. It was an exciting experience to work with top scientists like William Bigbee, John Boice, Timo Hakulinen, Ronald Jensen and Gayle Littlefield. (author)

How to harvest brainpower for a brighter future on Earth - bypassing stereotypes in practice

Science.gov (United States)

Hammarlund, Emma U.

2016-04-01

Our ability to detect and respond to patterns, the core asset in scientific work, likely has been a strong evolutionary advantage when navigating between need and danger. We therefore argue that our use of stereotypes for the most part is decoupled from malice but instead profoundly rooted, pervasive and often unchallenged in our daily thought process. The fundamental need for patterns also means that we all express biases - regardless of our gender - such as during teaching, mentoring or collaborations. As culprits, our implicit bias both disfavor (e.g. female or immigrant students) and favor (e.g. the-celebrated-worker's-results-are-probably-stronger-than-they-seem) our fellow workers in unsolicited ways. Additionally, people in our environment adapt to the expectations we express, called the stereotype threat. Ultimately, these two effects likely lead to missed opportunities for new questions and achievements. The omni-present implicit bias also means that some equality efforts, such as quotas, would soon be neutralized unless we train in catching our use of stereotypes in action. We will share our experiences from gender sensitivity training during teaching and assessment, such as the use of anonymous exams, simple 'traps' to demonstrate gender bias, and group work management. We also present views collected in our group on how academic talent management may improve through mentorship, career coaching and general policy decisions. All with the selfish ambition to improve future harvests of brainpower, for science and for sustainable human life on Earth.

Sustainable development outlooks of the Estonian energy sector for convergence with the European Union countries

International Nuclear Information System (INIS)

Laur, Anton; Tenno, Koidu; Soosaar, Sulev

2002-01-01

The article presents an overview of a research conducted in the Estonian Inst. of Economics and the Estonian Energy Research Inst. with the objectives to: analyse the dynamics of the main Estonian energy use indicators over the last 8-10 years with the background of general macroeconomics developments; compare these indicators with the respective energy indicators in the European Union Member States and Candidate Countries; evaluate Estonia's potential to catch up by the energy use efficiency (GDP energy intensity) of the average level of EU countries, modelling our possible development scenarios of GDP and TPES. The research results indicates several positive development tendencies (e.g. reduction of TPES and CO 2 emissions with the background of economic growth) in the Estonian energy sector, as well as convergence with the EU countries in terms of GDP energy intensity. Unfortunately, the model analysis results demonstrate that it takes a lot of time for Estonia to reach the current EU level - even under the most favourable GDP and TPES development conditions, 25-30 years. The primary reason is the very low level of our GDP per capita compared to the EU countries. (author)

Tabud ja reeglid. Sissevaateid eesti laagriromaani / Taboos and Rules. Insights into Prison Camp Novels by Estonian Writers

Directory of Open Access Journals (Sweden)

Anneli Kõvamees

2013-12-01

Full Text Available The article concentrates on Estonian novels depicting Soviet prison camps in the 1940s and 1950s. The goal is to map themes, motifs and characteristics in such novels, concentrating on various taboos and rules in the prison camp environment. For a long time the Soviet prison camp theme was not publicly discussed in Estonia due to political reasons. Texts dealing with prison camps could appear in print only outside the Soviet Union; the way Estonians saw these historical events and hellish experiences were depicted mostly in exile novels. Most notable are the novels by Arved Viirlaid (b. 1922, e.g., Kes tappis Eerik Hormi? (Who Killed Eerik Horm? (1974, Surnud ei loe (The Dead do not Read (1975, Vaim ja ahelad (Mind and Chains (1961. Estonian prison camp novels can be seen as “the literature of testimony”, to use the term by Leona Toker. Dramatic historical events are written down to record the events and to show the inhumane nature of Soviet society. These records of the dramatic past follow certain patterns and create certain self- and hetero-images. A prison camp is a closed territory within a closed territory; prison camps can be seen as small models of Soviet society. Prison camp novels give a detailed view of the environment of the prison camp, its inhabitants and activities. Two central aspects are labour and food; the life of the prisoner whirls around these. The most important thing is to survive, which often leads to moral decline, e.g., stealing, cheating. However, there are lines Estonians do not cross, e.g., cannibalism or homosexual relationships with superiors. Estonians are always depicted as political prisoners (not common criminals and heterosexuals, while Russians are portrayed mainly as criminals and often also as homosexuals. Another important component of the image of the Estonians is their enterprising spirit and ability to manage even under very difficult conditions. Therefore, several oppositions can be identified, e

Estonian Golf & Country Clubi klubihoone / Andres Siim, Alar Just

Index Scriptorium Estoniae

Siim, Andres

2005-01-01

Harjumaal Jõelähtme vallas rajab Estonian Golf & Country Club uut Jägala-Jõesuu spordi- ja puhkekeskust, mille südameks saab puidust golgiklubi hoone, mida tutvustavad klubihoone arhitekt ja üks inseneridest. Ill.: vaade ehitusele, projekti kaks vaadet, lõige

Value Education in Estonian Preschool Child Care Institutions

Science.gov (United States)

Ülavere, Pärje; Tammik, Anu

2017-01-01

For systematic implementation of value education in educational institutions, the national programme "Values Development in Estonian Society 2009-2013" (Ministry of Education and Research 2009) was prepared in Estonia. However, it was launched only in 2010, and the authors intended to ascertain the values of the heads of preschool child…

Estonian energy forest project

International Nuclear Information System (INIS)

Koppel, A.; Kirt, E.; Kull, K.; Lasn, R.; Noormets, A.; Roostalu, H.; Ross, J.; Ross, V.; Sulev, M.

1994-04-01

In February 1993 an agreement of Swedish-Estonian scientific co-operation on energy forest was signed. In may five energy forest plantations (altogether 2 ha) were established in Estonia with Swedish selected clones of Salix viminalis and Salix dasyclados. The research within this project is carried out within three main directions. The studies of basic ecophysiological processes and radiation regime of willow canopy will be carried out in Toravere. The production ecology studies, comparison of the productivity of multiple clones on different soil types is based on the plantations as vegetation filter for wastewater purification is studied on the basis of plantations in Vaeike-Maarja and Valga (author)

Characterisation of fuels for advanced pressurised combustion

Energy Technology Data Exchange (ETDEWEB)

Zevenhoven, R; Hupa, M; Backman, P; Forssen, M; Karlsson, M; Kullberg, M; Sorvari, V; Uusikartano, T [Aabo Akademi, Turku (Finland). Combustion Chemistry Research Group; Nurk, M [Tallinskij Politekhnicheskij Inst., Tallinn (Estonia)

1997-10-01

The objective of the research was to determine a set of fuel characteristics which quantify the behaviour of a fuel in a typical pressurised combustor or gasifier environment, especially in hybrid processes such as second generation PFBC. One specific aspect was to cover a wide range of fuels, including several coal types and several grades of peat and biomasses: 7 types of coal, 2 types of peat, 2 types of wood, 2 types of black liquor, Estonian oil shale and Venezuelan Orimulsion were studied. The laboratory facilities used are a pressurised thermogravimetric reactor (PTGR), a pressurised grid heater (PGH) and an atmospheric entrained flow quartz tube reactor, with gas analysis, which can be operated as a fixed bed reactor. A major part of the work was related to fuel devolatilisation in the PGH and sequential devolatilisation and char gasification (with carbon dioxide or steam) in the PTGR. The final part of that work is reported here, with the combustion of Estonian oil shale at AFBC or PFBC conditions as additional subject. Devolatilisation of the fuels at atmospheric pressure in nitrogen while monitoring gaseous exhausts, followed by ultimate analysis of the chars has been reported earlier. Here, results on the analysis of the reduction of NO (with and without CO) on chars at atmospheric pressure in a fixed bed reactor are reported. Finally, a comparison is given between experimental results and direct numerical simulation with several computer codes, i.e. PyroSim, developed at TU Graz, Austria, and the codes Partikkeli, Pisara and Cogas, which were provided by VTT Energy, Jyvaeskylae

Estonian wind climate

International Nuclear Information System (INIS)

Kull, Ain

1999-01-01

Estonia is situated on the eastern coast of the Baltic Sea. This is a region with intensive cyclonic activity and therefore with a relatively high mean wind speed. Atmospheric circulation and its seasonal variation determine the general character of the Estonian wind regime over the Atlantic Ocean and Eurasia. However, the Baltic sea itself is a very important factor affecting wind climate, it has an especially strong influence on the wind regime in costal areas. The mean energy density (W/m 2 ) is a wind energy characteristic that is proportional to the third power of wind speed and describes energy available in a flow of air through a unit area. The mean energy density is a characteristic which has practical importance in regional assessment of snowdrift, storm damage and wind energy

Musical Practices and Methods in Music Lessons: A Comparative Study of Estonian and Finnish General Music Education

Science.gov (United States)

Sepp, Anu; Ruokonen, Inkeri; Ruismäki, Heikki

2015-01-01

This article reveals the results of a comparative study of Estonian and Finnish general music education. The aim was to find out what music teaching practices and approaches/methods were mostly used, what music education perspectives supported those practices. The data were collected using questionnaires and the results of 107 Estonian and 50…

Top 10 Estonian albums of 2004 / Igor Garshnek

Index Scriptorium Estoniae

Garšnek, Igor, 1958-

2004-01-01

Heliplaatidest: Arvo Pärt "Pro et contra", Various composers "Baltic Voices 2", Raimo Kangro "Displays", Toivo Tulev "Be Lost in the Call", Indrek Vau and Mati Mikalai "Estonian Trumpet Music", Erdmann/Sooäär "Dessert Time, Peer Gynt & Other Stories", Alo Mattiisen "50 parimat laulu", Riho Sibul "Must", Rein Rannap "Tantsib klaveril", Eesti Keeled "Kella tiksumist..."

Trace metal emissions from the Estonian oil shale fired power

DEFF Research Database (Denmark)

Aunela-Tapola, Leena A.; Frandsen, Flemming; Häsänen, Erkki K.

1998-01-01

Emission levels of selected trace metals from the Estonian oil shale fired power plant were studied. The plant is the largest single power plant in Estonia with an electricity production capacity of 1170 MWe (1995). Trace metals were sampled from the flue gases by a manual method incorporating...... in the flue gases of the studied oil shale plant contribute, however, to clearly higher total trace metal emission levels compared to modern coal fired power plants. Although the old electrostatic precipitators in the plant have been partly replaced by state-of-the-art electrostatic precipitators...... a two-fraction particle sampling and subsequent absorption of the gaseous fraction. The analyses were principally performed with ICP-MS techniques. The trace metal contents of Estonian oil shale were found to be in the same order of magnitude as of coal on average. The high total particle concentrations...

[Marge Rennit. Eesti muuseumid / Estonian museums] / Tapio Mäkeläinen

Index Scriptorium Estoniae

Mäkeläinen, Tapio

2009-01-01

Tutvustus: Eesti muuseumid = Estonian museums / [Eesti Muuseumiühing ; koostaja Marge Rennit ; tõlkija Tiina Mällo ; toimetaja Ivi Tammaru ; eessõna: Piret Õunapuu ; kujundaja Marek Allvee]. Tallinn : Oomen, 2008

Cancer incidence and thyroid disease among Estonian Chernobyl clean-up workers

Energy Technology Data Exchange (ETDEWEB)

Auvinen, A; Salomaa, S [eds.; Radiation and Nuclear Safety Authority, Helsinki (Finland); Rahu, M; Veidebaum, T; Tekkel, M [eds.; Inst. of Experimental and Clinical Medicine, Tallinn (Estonia); Hakulinen, T [ed.; Finnish Cancer Registry, Helsinki (Finland); Boice, Jr, J D [ed.; Int. Epidemiology Inst., MD (United States)

1998-09-01

The report describes the development and summarizes the results of the project Cancer incidence and thyroid disease among Estonian Chernobyl clean-up workers. One of the goals of the report is to give research protocols and questionnaires for researchers involved in other studies. Eight previously published articles are also included summarizing the results. The development of the collaboration work of the project is described in the introduction of the report. Epidemiological methods are described in an article complemented by the protocol and English version of the questionnaire administered to all cleanup workers, as well as the data collection form of the thyroid study. The results from biological biodosimetry using both glycophorin A and FISH methods have shown that the radiation doses received by the Chernobyl cleanup workers were relatively low. Thyroid nodularity was not associated with any radiation exposure characteristic in the thyroid screening study. Estonian Chernobyl cleanup workers were followed up for cancer incidence through the Estonian Cancer Registry. No cases of leukemia or thyroid cancer were observed by the end of 1993. It is too early to observe possible effect on other types of cancer. However, mortality from suicides was increased compared with general population. Further follow-up and the extension to other Baltic countries in the future will undoubtedly strengthen the study. There are also plans for future projects covering areas from psychosocial factors to radiation biology

MINORITY LANGUAGES IN ESTONIAN SEGREGATIVE LANGUAGE ENVIRONMENTS

Directory of Open Access Journals (Sweden)

Elvira Küün

2011-01-01

Full Text Available The goal of this project in Estonia was to determine what languages are spoken by students from the 2nd to the 5th year of basic school at their homes in Tallinn, the capital of Estonia. At the same time, this problem was also studied in other segregated regions of Estonia: Kohtla-Järve and Maardu. According to the database of the population census from the year 2000 (Estonian Statistics Executive Office's census 2000, there are representatives of 142 ethnic groups living in Estonia, speaking a total of 109 native languages. At the same time, the database doesn’t state which languages are spoken at homes. The material presented in this article belongs to the research topic “Home Language of Basic School Students in Tallinn” from years 2007–2008, specifically financed and ordered by the Estonian Ministry of Education and Research (grant No. ETF 7065 in the framework of an international study called “Multilingual Project”. It was determined what language is dominating in everyday use, what are the factors for choosing the language for communication, what are the preferred languages and language skills. This study reflects the actual trends of the language situation in these cities.

Problems of contemporary ecology. Temporal changes in Estonian nature and environment

International Nuclear Information System (INIS)

Frey, T.

1997-01-01

This conference was held 8-9 May 1997 at Tartu, Estonia. The proceedings of the 7. Estonian Conference in Ecology contain the results of mostly original research in environmental science, conservation and natural philosophy

Strategies for Estonian rural family enterprises. Eesti maapiirkonna pereettevõtete strateegia

Directory of Open Access Journals (Sweden)

Maret Kirsipuu

2013-01-01

Full Text Available The paper seeks to analyse family businesses in rural areas, family business strategies and re-registration of sole proprietors with the Centre of Registers and Information Systems (hereinafter Commercial Register in 2009, and to provide an overview of entrepreneurship policies targeted at Estonian rural businesses. Layoffs have increased the number of unemployed; some of those who have lost employment opt for social assistance benefits, but some others decide to become entrepreneurs. Many enterprising people in Estonia have set up a family enterprise, mainly in the sphere of services, agriculture and tourism. The Estonian entrepreneurship policy supports enterprising people and approves of entrepreneurship as a promoter of national economic development. One of the most positive qualities of family enterprises is their short decision-making chain, which ensures rapid implementation of the strategy.

Domestic fuel consumption in Estonia (The first half of 1993)

International Nuclear Information System (INIS)

Veski, Rein

1993-01-01

According to the data of the Estonian Statistics Department the consumption of fuels in Estonia over the period of January-June 1993 was a follows: coal 77,053 t, oil shale 7,981,840 t, fuel peat 127,376 t, peat briquette 42,041 t, firewood 154,511 solid metres, wood chip 55,648 solid metres. The consumption of fuel peat (chiefly for producing briquette) was more considerable in the town of Kohtla-Jaerve and in the districts of Paernu and Tartu where Estonia's major peat-briquette plants are located. The share of peat in the other industries has been less significant. (author)

The problems and development potential of revenue autonomy in Estonian municipalities. Kohalike omavalitsuste tuluautonoomia probleemid ja arenguvõimalused Eestis

Directory of Open Access Journals (Sweden)

Janno Reiljan

2013-01-01

Full Text Available In a regionally heterogeneous country like Estonia, it is a difficult task to create a local government revenue structure that guarantees even supply of public services across the entire country and, at the same time, revenue autonomy for the municipalities. In the theoretical part of the current article the suitability of different sources of own revenues are analysed in the context of Estonian municipalities. The empirical part of the article compares the financing principles of Estonian municipalities with other EU countries. Finally, the proportions of different own sources of revenues in the budgets of Estonian local governments are examined and suggestions are made for changing the current system

Alberta's Estonians 1899 - Present TLÜ Akadeemilises Raamatukogus / Sander Jürisson

Index Scriptorium Estoniae

Jürisson, Sander

2014-01-01

Tallinna Ülikooli Akadeemilises Raamatukogus on üleval näitus "Alberta's Estonians 1899 - Present", mis annab ülevaate Kanada Alberta provintsi eestlaste loost. Näitus valmis Alberta Eesti Kultuuripärandi Seltsi koostöös Alberta Provintsi Arhiivi Kultuuripärandi Osakonnaga Edmontonis

Estonian Leader's Freedom Call Creates Storm / Anna Smolchenko

Index Scriptorium Estoniae

Smolchenko, Anna

2008-01-01

President Toomas Hendrik Ilvese esinemisest soome-ugri rahvaste maailmakongressil Hantõ-Mansiiskis, kohtumisest Venemaa presidendi Dmitri Medvedeviga, Eesti delegatsiooni saalist väljamarssimisest Venemaa riigiduuma väliskomisjoni esimehe Konstantin Kossatshovi sõnavõtu ajal. Ilmunud ka: St. Petersburg Times 1. juuli 2008, pealk.: Estonian Leader's Freedom Call Creates Controversy (lüh.). Vabariigi President töövisiidil Venemaal 27.-30.06.2008

Smoking habits and attitudes towards smoking among Estonian physicians.

Science.gov (United States)

Pärna, K; Rahu, K; Rahu, M

2005-05-01

This study examined the smoking habits and attitudes towards smoking among Estonian physicians. Cross-sectional data for 2668 physicians were gathered by a self-administered postal survey. The current smoking prevalence was 24.9% for male physicians and 10.8% for female physicians. The percentages of ex-smokers were 32.9 and 16.8%, respectively. Smoking prevalence among physicians was below the levels reported for the highest educational bracket of the total population in Estonia. Non-smoking physicians had more unfavourable views towards smoking than those who smoked. The majority of physicians were aware of the association between smoking and various diseases, with significant differences between smokers and non-smokers. Non-smoking physicians were more active in asking patients about smoking habits than those who smoked. Most Estonian physicians, especially those who smoked, failed to perceive themselves as positive role models. This study found a lower prevalence of smoking among physicians compared with the general population, and demonstrated the impact of personal smoking on physicians' attitudes towards smoking. The results provide an important challenge to medical education in Estonia.

Exhibition of photography from the Estonian diaspora / Ellu Maar

Index Scriptorium Estoniae

Maar, Ellu, 1982-

2010-01-01

Näitus "Photography from the Estonian Diaspora / Väliseesti foto" Kumu Kunstimuuseumis 8.10.-19.11.2010, kuraatorid Eha Komissarov ja Ellu Maar. Näitus tutvustas 1944. a. Eestist lahkunud või juba võõrsil sündinud fotograafide (Eric Soovere, Karl Hintzer, Priit Vesilind, Rein Välme jt.) loomingut ja valikut väliseesti fotoarhiividest

Estonian Airi ümber käib lehmakauplemine / Tõnu Lilleorg

Index Scriptorium Estoniae

Lilleorg, Tõnu

2008-01-01

Skandinaavia lennukompanii SAS saatis Eesti valitsusele kirja, milles teatab, et on nõus raskustes Estonian Airile lisainvesteeringuid tegema vaid siis, kui riik müüb SAS-ile oma osaluse, 34%. Vt. samas: SAS ei taha lennufirma eest maksta üle 150 miljoni. Diagramm: Majandusnäitajad, omanikud

Spatial patterns of soil organic carbon stocks in Estonian arable soils

Science.gov (United States)

Suuster, Elsa; Astover, Alar; Kõlli, Raimo; Roostalu, Hugo; Reintam, Endla; Penu, Priit

2010-05-01

Soil organic carbon (SOC) determines ecosystem functions, influencing soil fertility, soil physical, chemical and biological properties and crop productivity. Therefore the spatial pattern of SOC stocks and its appropriate management is important at various scales. Due to climate change and the contribution of carbon store in the soils, the national estimates of soil carbon stocks should be determined. Estonian soils have been well studied and mapped at a scale 1:10,000. Previous studies have estimated SOC stocks based on combinations of large groups of Estonian soils and the mean values of the soil profile database, but were not embedded into the geo-referenced databases. These studies have estimated SOC stocks of Estonian arable soils 122.3 Tg. Despite of available soil maps and databases, this information is still very poorly used for spatial soil modelling. The aim of current study is to assess and model spatial pattern of SOC stocks of arable soils on a pilot area Tartu County (area 3089 sq km). Estonian digital soil map and soil monitoring databases are providing a good opportunity to assess SOC stocks at various scales. The qualitative nature of the initial data from a soil map prohibits any straightforward use in modelling. Thus we have used several databases to construct models and linkages between soil properties that can be integrated into soil map. First step was to reorganize the soil map database (44,046 mapping units) so it can be used as an input to modelling. Arable areas were distinguished by a field layer of Agricultural Registers and Information Board, which provides precise information of current land use as it is the basis of paying CAP subsidies. The estimates of SOC content were found by using the arable land evaluation database of Tartu from the Estonian Land Board (comprising 950 sq km and 31,226 fields), where each soil type was assessed separately and average SOC content grouped by texture was derived. SOC content of epipedon varies in

Comparison of knowledge, attitudes and behaviour regarding smoking among Estonian and Finnish physicians.

Science.gov (United States)

Pärna, Kersti; Rahu, Kaja; Barengo, Noël C; Rahu, Mati; Sandström, Patrick H; Jormanainen, Vesa J; Myllykangas, Markku T

2005-01-01

To compare smoking behaviour, attitudes and opinions towards smoking and smoking cessation among Estonian and Finnish physicians. A cross-sectional postal survey using a self-administered questionnaire was carried out among 2,480 Estonian and 2,075 Finnish physicians. Daily smoking prevalence was higher among Estonian physicians than among their Finnish counterparts in both male (18.6% and 6.7%) and female (6.6% and 3.6%). Compared to Estonia, physicians in Finland more often agreed that smoking is very harmful to their health, that trying to convince people to stop smoking is their responsibility and that smoking prevention should be part of the normal and special training of health professionals. In both countries, non-smoking physicians held more unfavourable attitudes towards smoking than those who were smoking. Physicians' own smoking patterns and quitting behaviour are important because physicians serve as models for their patients and play a key role in the reinforcement of smoke-free health facilities. These results remain a challenge to medical educators, especially in Estonia. Estonia needs to improve medical education in terms of motivating physicians to ask about the smoking patterns of their patients and of training medical students and resident physicians to counsel their patients to stop smoking.

Az észt névtervezés az észt nyelvpolitikai modell tükrében [The name management in the mirror of the Estonian LPP-model

OpenAIRE

Pomozi, Péter; Földesi, Eszter

2016-01-01

The Estonian model of language planning and policy, which has been serving the development and protection of the Estonian language in its current form since 2004, is one of the most successful of such strategies in Europe. It owes it success to the broad social and scientific consensus reached in questions of language policy, regardless of changes in government. The Development Plan of the Estonian Language divides Estonian language planning and policy into three parts: status planning, corpu...

Identity and Othering in Past and Present: Representations of the Soviet Era in Estonian Post-Soviet Textbooks

Directory of Open Access Journals (Sweden)

Katrin Kello

2018-02-01

Full Text Available This paper analyses representations of the ‘core Soviet era’ (1945-1985 in Estonian post-Soviet history textbooks (1989-2016. Attitudes towards the Soviet system have been a rich resource for identity building, and hence a powerful political tool across the whole of the post-Soviet block. Based on an analysis of sections about the Soviet era in Estonia in 21 textbooks, the paper takes a look at how textbooks reflect broader processes of social meaning making, identity building and othering after a profound social and political turn. In 1989 and during the early 1990s, perspectives and narratives in Estonian history textbooks were closely related to social memory and national politics, enacting a specific social representation of the Soviet era that dominated the Estonian-speaking public space during the 1990s. The Soviet era, Russia and local Russians became the main Others for Estonia and Estonians. Over time, public discourse has diversified. The national curriculum and textbooks, however, still maintain the canon that formed in 1990s and thus reflect earlier sentiments. Apart from the increasing salience of Soviet-era daily life in more recent textbooks, the thematic choices and emphases have changed little since the 1990s. Therefore, even if the style of writing has ‘cooled down’, issues of identity preservation, resistance and accommodation, together with a saliently negative representation of wrongdoings by the Soviet system, still prevail. On the one hand, this testifies to the resilience of an established tradition in the textbook genre in general. On the other hand, it reflects the dominance of an ethnocentric tradition in Estonian history textbook writing. The paper discusses the implications of these findings for interethnic relations in Estonia.

Development of a breeding objective for Estonian Holstein cattle

Directory of Open Access Journals (Sweden)

E. PÄRNA

2008-12-01

Full Text Available Economic weights for milk carrier (water plus lactose, fat and protein yields, calving interval, age at first service, interval between the first service and conception of heifers and length of productive life of Estonian Holsteins were estimated under assumed milk production quota and for non-quota conditions. A bio-economic model of an integrated production system of a closed herd was used. Economic values of milk carrier yield and length of productive life differed between quota and non-quota conditions, but there were only minor differences between those marketing systems in economic values for functional traits. The standardised economic values of the most important traits varied in magnitude between18 to 81% of the economic value for milk yield. Discounting had a substantial impact on the economic value of length of productive life. When defining the breeding objective for Estonian Holstein, the interval between the first service and conception of heifers, and the length of productive life should be included in the breeding goal along with the traits with the highest economic value, milk, fat and protein yield. In the optimum breeding objective, relative weights of production vs. functional traits were 79 and 21%, respectively.;

Trends in smoking behaviour among Estonian physicians in 1982-2014.

Science.gov (United States)

Pärna, Kersti; Põld, Mariliis; Ringmets, Inge

2017-07-25

Smoking surveys among physicians have proved useful in highlighting the importance of physicians as healthy life style exemplars and role models in tobacco control and smoking cessation. The aim of this study was to give an overview of smoking behaviour among Estonian physicians from 1982 to 2014. Three cross-sectional postal surveys using a self-administered questionnaire were carried out among all practising physicians in Estonia. The number of physicians participating in this study was 3786 in 1982, 2735 in 2002, and 2902 in 2014. Data analysis involved calculating the age-standardized prevalences of smoking, prevalences of smoking by age group and mean age of smoking initiation. A non-parametric test for trend was used to assess significant changes in smoking over time. Age-standardized prevalence of current smoking among men was 39.7% in 1982, 20.9% in 2002, and 14.3% in 2014 and among women 12.2%, 8.0%, and 5.2%, respectively (p smoking among men and women was in age groups under 35 (from 55.2% to 16.7% and from 16.7% to 2.8%, respectively) and 35-44 (from 47.1% to 8.3% and from 19.5% to 5.1%, respectively) (p smoking initiation decreased from 20.4 to 19.3 among men and from 24.5 to 20.4 among women over the study period. In 1982-2014, smoking prevalence among Estonian physicians declined substantially. This may influence the willingness of society to recognize the health consequences of smoking which could give a support to the decline of the smoking epidemic in the country. Differences between smoking among male and female physicians persisted over the study period, but mean age of smoking initiation decreased. A further decline in smoking among Estonian physicians should be encouraged by special efforts targeted at physicians.

Field trial on glucose-induced insulin and metabolite responses in Estonian Holstein and Estonian Red dairy cows in two herds

Directory of Open Access Journals (Sweden)

Kaart Tanel

2010-01-01

Full Text Available Abstract Background Insulin secretion and tissue sensitivity to insulin is considered to be one of the factors controlling lipid metabolism post partum. The objective of this study was to compare glucose-induced blood insulin and metabolite responses in Estonian Holstein (EH, n = 14 and Estonian Red (ER, n = 14 cows. Methods The study was carried out using the glucose tolerance test (GTT performed at 31 ± 1.9 days post partum during negative energy balance. Blood samples were obtained at -15, -5, 5, 10, 20, 30, 40, 50 and 60 min relative to infusion of 0.15 g/kg BW glucose and analysed for glucose, insulin, triglycerides (TG, non-esterified fatty acids (NEFA, cholesterol and β-hydroxybutyrate (BHB. Applying the MIXED Procedure with the SAS System the basal concentration of cholesterol, and basal concentration and concentrations at post-infusion time points for other metabolites, area under the curve (AUC for glucose and insulin, clearance rate (CR for glucose, and maximum increase from basal concentration for glucose and insulin were compared between breeds. Results There was a breed effect on blood NEFA (P P P P P P th min nadir (P th min postinfusion (P Conclusion Our results imply that glucose-induced changes in insulin concentration and metabolite responses to insulin differ between EH and ER dairy cows.

Organizational Commitment in Estonian University Libraries: A Review and Survey

Science.gov (United States)

Kont, Kate-Riin; Jantson, Signe

2014-01-01

The data used in this article is based on the reviewing of relevant literature to provide an overview of the concepts of organizational commitment, job security, and interpersonal relations, as well as on the results of the original online survey, conducted by the article's authors, held in 2012 in Estonian university libraries governed by public…

Estonian folk traditional experiences on natural anticancer remedies: from past to the future.

Science.gov (United States)

Sak, Katrin; Jürisoo, Kadi; Raal, Ain

2014-07-01

Despite diagnostic and therapeutic advancements, the burden of cancer is still increasing worldwide. Toxicity of current chemotherapeutics to normal cells and their resistance to tumor cells highlights the urgent need for new drugs with minimal adverse side effects. The use of natural anticancer agents has entered into the area of cancer research and increased efforts are being made to isolate bioactive products from medicinal plants. To lead the search for plants with potential cytotoxic activity, ethnopharmacological knowledge can give a great contribution. Therefore, the attention of this review is devoted to the natural remedies traditionally used for the cancer treatment by Estonian people over a period of almost 150 years. Two massive databases, the first one stored in the Estonian Folklore Archives and the second one in the electronic database HERBA ( http://herba.folklore.ee/ ), containing altogether more than 30 000 ethnomedicinal texts were systematically reviewed to compile data about the Estonian folk traditional experiences on natural anticancer remedies. As a result, 44 different plants with potential anticancer properties were elicited, 5 of which [Angelica sylvestris L. (Apiaceae), Anthemis tinctoria L. (Asteraceae), Pinus sylvestris L. (Pinaceae), Sorbus aucuparia L. (Rosaceae), and Prunus padus L. (Rosaceae)] have not been previously described with respect to their tumoricidal activities in the scientific literature, suggesting thus the potential herbal materials for further investigations of natural anticancer compounds.

HIV testing and counselling in Estonian prisons, 2012 to 2013: aims, processes and impacts.

Science.gov (United States)

Kivimets, K; Uuskula, A

2014-11-27

We present data from an observational cohort study on human immunodeficiency virus (HIV) prevention and control measures in prisons in Estonia to assess the potential for HIV transmission in this setting. HIV testing and retesting data from the Estonian prison health department were used to estimate HIV prevalence and incidence in prison. Since 2002, voluntary HIV counselling and testing has routinely been offered to all prisoners and has been part of the new prisoners health check. At the end of 2012, there were 3,289 prisoners in Estonia, including 170 women: 28.5% were drug users and 15.6% were infected with HIV. Of the HIV-positive inmates, 8.3% were newly diagnosed on prison entry. In 2012, 4,387 HIV tests (including retests) were performed in Estonian prisons. Among 1,756 initially HIV-negative prisoners who were in prison for more than one year and therefore tested for HIV twice within 12 months (at entry and annual testing), one new HIV infection was detected, an incidence of 0.067 per 100 person-years (95% confidence interval (CI): 0.025–5.572). This analysis indicates low risk of HIV transmission in Estonian prisons. Implementation of HIV management interventions could impact positively on the health of prisoners and the communities to which they return.

[Pärtel Lippus. The acoustic features and perception of the Estonian quantity system] / Stefan Werner

Index Scriptorium Estoniae

Werner, Stefan

2012-01-01

Arvustus: Pärtel Lippus. The acoustic features and perception of the Estonian quantity system. Tartu : Tartu University Press, 2011. (Dissertationes philologiae estonicae Universitatis Tartuensis ; 29)

Eesti autobiograafilise kirjutuse kujunemisest 18. sajandist Teise maailmasõjani. The Development of Estonian Autobiographical Writing from the 18th Century to the Second World War

Directory of Open Access Journals (Sweden)

Rutt Hinrikus

2012-04-01

Full Text Available In this article I examine the development of Estonian autobiographical writing from its first manifestations to published memoirs, and the development of life writing and its diversification. The beginnings of life writing can be traced back to Estonian folk song and Estonian incidental poetry. The Moravian Brethren movement in Estonia in the 18th century promoted the spread of canonical autobiography. The Moravian Brethren offered alternative opportunities for self-realisation for Estonians who were serfs, and were therefore popular with the people. The practice of the Moravian Brethren made use of retelling and writing about the life of the congregation members, which sometimes became suitable biographies in print, especially stories of awakening. Several manuscript biographies have survived from the Brethren times, such as the biographies of Mäletu Jaan and Mihkel Sarapuu. In addition to the history of the Moravian Brethren movement, these biographies give information about the educational situation and living conditions of the people of the time. The Estonian life writing tradition emerged within the reigning Baltic German cultural space thanks to the Estophiles among the Baltic Germans (J. H. Rosenplänter and the first Estonian men of letters; from the early 19th century we have the diary by Rosenplänter, an estophile pastor from Pärnu, and the diary by the Estonian poet, the then-student Kristjan Jaak Peterson, both in the Estonian language. Johann Voldemar Jannsen, the founder of Estonian-language journalism, kept a diary in the German language for a longer period of time; it was usual that the first Estonian intellectuals (Lilli Suburg, and others in the late 19th century wrote in German. Admittedly, the first Estonian-language life history was written by a forward-looking 19th century peasant named Märt Mitt (1833-1912, who was conscious of himself as a historical subject and gave his memoirs, begun in the 1880s, a memorable title

Estonian Cell peab suu kasumist puhtaks pühkima / Kaisa Tahlfeld, Katre Pilvinski

Index Scriptorium Estoniae

Tahlfeld, Kaisa

2008-01-01

Estonian Cell saatis valitsusele pöördumise, milles palutakse teha parandusi elektrienergiaga seonduvates seadustes, mis aitaksid ettevõtet energia hinnatõusu ajal. Elektri hinnatõusu tõttu on muutunud küsitavaks ka Nitroferti tehase edasine eksisteerimine

Serological evidence of exposure to globally relevant zoonotic parasites in the Estonian population

DEFF Research Database (Denmark)

Lassen, Brian; Janson, Marilin; Viltrop, Arvo

2016-01-01

We investigated Estonian population and its selected subgroups for serological evidence of exposure to Ascaris lumbricoides, Echinococcus spp., Taenia solium, Toxocara canis, Toxoplasma gondii, and Trichinella spiralis. Serum samples from 999 adults representing general population, 248 children a...

Acquisition of noun derivation in Estonian and Russian L1

Directory of Open Access Journals (Sweden)

Reili Argus

2018-04-01

Full Text Available Acquisition of derivation is not a well-studied area in first language research and a comparative approach to the acquisition of derivation in different languages doesn’t exist. There is no information on how a child acquires derivation in a language with a rich and regular system of derivational patterns, or in a language where derivation is productive, but the system of derivational patterns is opaque. According to general ideas of complexity in a language, the child should start to use simplex stems first and, only after that, complex ones, that is, complexity should increase in the course of acquisition. Our paper is intended to address these issues, based on longitudinal child data from typologically different languages, Estonian and Russian. The results revealed significant differences in the acquisition of noun derivation in the two languages under observation. The system of noun derivation is acquired at a faster pace in Russian, while Estonian children have far fewer noun derivatives in their speech and they use different derivation suffixes with less regularity. Even so, the so-called building block model may be applied for both languages only partially.

Tiger in Focus--A National Survey of ICT in Estonian Schools

Science.gov (United States)

Toots, Anu; Laanpere, Mart

2004-01-01

Estonia has not participated in international studies of ICT in education, nor have there been any similar studies at the national level up until the year 2000. The first survey of ICT in Estonian schools was conducted after completion of the national school computerization programme called Tiger Leap. This paper focuses on the targeted responses…

Consumer Socialisation and Value Orientations among Estonian and Chinese Young People

Science.gov (United States)

Waerdahl, Randi; Kalmus, Veronika; Keller, Margit

2011-01-01

This paper asks if Estonian and Chinese tweens' access to pocket money influences their brand valuation, as well as value orientations in the context of perceived peer popularity and personal well-being. Surveys conducted in autumns 2006 (China n = 188) and 2007 (Estonia n = 111) show an inherent cultural resistance among tweens in both countries…

Az észt névtervezés az észt nyelvpolitikai modell tükrében [The name management in the mirror of the Estonian LPP-model

Directory of Open Access Journals (Sweden)

Pomozi, Péter

2016-12-01

Full Text Available The Estonian model of language planning and policy, which has been serving the development and protection of the Estonian language in its current form since 2004, is one of the most successful of such strategies in Europe. It owes it success to the broad social and scientific consensus reached in questions of language policy, regardless of changes in government. The Development Plan of the Estonian Language divides Estonian language planning and policy into three parts: status planning, corpus planning and prestige planning. Name management is a part of corpus planning, although certain aspects are also connected to legal and prestige planning. Name management strategies are present in all components of the Estonian model of language planning and policy, as linguistically appropriate name use is not only a socio-cultural, but economic question, as informative and easy to understand names contribute to measurable economic advantages. The paper mainly demonstrates the dilemmas and answers of Estonian name management through examples from personal name giving practices, but questions concerning the problems of name use in a multicultural environment and the difficulties of place name and firm name management are also discussed.

Väärikas Estonian Air jäi kampaaniaga hätta / Alyona Stadnik

Index Scriptorium Estoniae

Stadnik, Alyona

2010-01-01

Estonian Air müüs veebikaupluse cherry.ee kaudu soodsaid kinkekaarte. Vastuolu tekkis asjaolust, et nõudlus kinkekaartide järele oli suurem kui pakkumine. Lennukompanii katkestas soodsate kinkekaartide müügi

Field of genes: the politics of science and identity in the Estonian Genome Project.

Science.gov (United States)

Fletcher, Amy L

2004-04-01

This case study of the Estonian Genome Project (EGP) analyses the Estonian policy decision to construct a national human gene bank. Drawing upon qualitative data from newspaper articles and public policy documents, it focuses on how proponents use discourse to link the EGP to the broader political goal of securing Estonia's position within the Western/European scientific and cultural space. This dominant narrative is then situated within the analytical notion of the "brand state", which raises potentially negative political consequences for this type of market-driven genomic research. Considered against the increasing number of countries engaging in gene bank and/or gene database projects, this analysis of Estonia elucidates issues that cross national boundaries, while also illuminating factors specific to this small, post-Soviet state as it enters the global biocybernetic economy.

Estonian Business Schooli magistriharidus nüüd ka koju kätte / Madis Habakuk

Index Scriptorium Estoniae

Habakuk, Madis

2007-01-01

Sügisest hakkab Estonian Business School koos Mainori Kõrgkooliga pakkuma magistriõpet majandushariduseta inimestele, kus soovijatel on võimalus õppida EBSi Master of Business Administration programmi järgi

The Role of Language in (Recreating Tatar Diaspora Identity: The Case of the Estonian Tatars

Directory of Open Access Journals (Sweden)

Maarja Klaas

2015-06-01

Full Text Available This paper focuses on the meanings assigned to Tatar language among the Tatar diaspora in Estonia. According to interviews with Estonian Tatars as well as descriptions of field material from Tatarstan, language is an important aspect of Tatar ethnic identity. This paper will track common discourses about the Tatar language and the way it is connected to Tatar ethnic identity. Issues concerning Tatar language are used to demonstrate various ways of enacting Tatarness in Estonia. It is shown that Estonian Tatars worry about the vitality and purity of Tatar language, but for some, marginalization of dialects is also an issue. People categorized with the same identity labels by self and others can experience and enact their Tatarness in a variety of different ways.

E-Banking: Risk Management Practices of the Estonian Banks

OpenAIRE

Dmitri Sokolov

2007-01-01

During the last years the development of e-banking in Estonia has been very significant. According to the report of the World Economic Forum, the Estonian IT-development has been substantial. The success of e-banking in Estonia can be compared to the corresponding success of the Nordic countries. According to the Deutsche Bank Research, around 70-80% of the Internet users in Estonia use Internet banking and in this respect, Estonia could be compared to Finland, Norway and Iceland. Despite of ...

Estonian Vocational Teachers' Attitudes towards Inclusive Education for Students with Special Educational Needs

Science.gov (United States)

Rose, Richard; Kaikkonen, Leena; Koiv, Kristi

2007-01-01

This paper presents the findings from research conducted with two samples of teachers from Estonian Vocational Schools. The first sample comprised a group of teachers who had received professional development directly related to the management of students with special educational needs in vocational education settings. Their attitudes and…

Isamaalaulud ja okupatsioonirežiim – nostalgia, utoopia ja reaalsus. Estonian Patriotic Songs and the Occupational Regime – Nostalgia, Utopia and Reality

Directory of Open Access Journals (Sweden)

Kanni Labi

2012-04-01

Full Text Available Estonian knowledge of history emanates from the fact that constituting an independent nation has for the most part been nothing but a utopia, and was a reality for a relatively short time. When it comes to selfidentification though, the expression ’a singing people’ is often used by the Estonians to describe themselves. Nostalgia for freedom is reflected in the Estonian culture of almost all periods and is carried on by the singing tradition, where patriotic songs emerge independent of different musical tastes within a particular generation and form an important part of a common Estonian repertoire. Patriotic songs occupy a central place in several fields of Estonian culture: besides music culture also in popular culture,and literary history – the works of poetry which have gained the most popularity are those which when put to music have been the most widely spread among the people. The main part of the most popular Estonian patriotic songs are choral songs from the national awakening at the end of the 19th century. Despite the national programmes aiming to wipe out ‘bourgeois nationalism’, they were sung at the song festivals in the Soviet era and were published in song books, expressing the people’s nostalgia for freedom lost. After the end of the Second World War, there was an attempt at launching a kind of patriotic new creation, where patriotism was merged with Soviet pathos; the aim was to show that the people’s utopia was in fact communism, but not a single one of those songs made it into the people’s common repertoire. Only the patriotic songs composed in the 1980s during the so-called new national awakening reached a popularity comparable to that of the old songs. The discourse on ’Estonianness’ and the shaping of a matching repertoire under imperial Russian rule took place under very different circumstances than its preservation and development in the second half of the 20th century under Soviet occupation, but

Estonian energy system: Proposals for the implementation of a cogeneration strategy

International Nuclear Information System (INIS)

Lund, H.; Hvelplund, F.; Ingermann, K.; Kask, U.

2000-01-01

Since the Soviet era Estonia inherited oil-shale-based electricity plants, with a capacity of 3000 MW. Oil shale now provides Estonia with very low electricity prices. However, most of the stations are very old. Half of them were built before 1965, and sooner or later the old oil shale production units will have to be replaced. Estonia will then have to face serious increases in electricity production prices. At the same time Estonia has problems in restoring its district heating systems. The prices are rising and may consumers have converted to other heating sources such as electric heating. The major long-term strategic policy choices to make in Estonia are to decide (1) whether the oil shale power stations should be replaced by new centralized production units such as new oil shale stations or nuclear power, or (2) whether the electricity production should be decentralized. In the centralized solution (oil shale or nuclear power), the domestic heating will be left to boilers or electric heating leading to a very high primary energy supply. In the decentralized solution, Estonia could benefit from the advantage of cogeneration leading to very low fuel consumption. But this latter strategy depends on the restoration of the district heating systems. This article seeks to form a strategy to improve the efficiency of the Estonian energy system by increasing the use of cogeneration. (author)

Mutational analysis of COL1A1 and COL1A2 genes among Estonian osteogenesis imperfecta patients.

Science.gov (United States)

Zhytnik, Lidiia; Maasalu, Katre; Reimann, Ene; Prans, Ele; Kõks, Sulev; Märtson, Aare

2017-08-15

Osteogenesis imperfecta (OI) is a rare bone disorder. In 90% of cases, OI is caused by mutations in the COL1A1/2 genes, which code procollagen α1 and α2 chains. The main aim of the current research was to identify the mutational spectrum of COL1A1/2 genes in Estonian patients. The small population size of Estonia provides a unique chance to explore the collagen I mutational profile of 100% of OI families in the country. We performed mutational analysis of peripheral blood gDNA of 30 unrelated Estonian OI patients using Sanger sequencing of COL1A1 and COL1A2 genes, including all intron-exon junctions and 5'UTR and 3'UTR regions, to identify causative OI mutations. We identified COL1A1/2 mutations in 86.67% of patients (26/30). 76.92% of discovered mutations were located in the COL1A1 (n = 20) and 23.08% in the COL1A2 (n = 6) gene. Half of the COL1A1/2 mutations appeared to be novel. The percentage of quantitative COL1A1/2 mutations was 69.23%. Glycine substitution with serine was the most prevalent among missense mutations. All qualitative mutations were situated in the chain domain of pro-α1/2 chains. Our study shows that among the Estonian OI population, the range of collagen I mutations is quite high, which agrees with other described OI cohorts of Northern Europe. The Estonian OI cohort differs due to the high number of quantitative variants and simple missense variants, which are mostly Gly to Ser substitutions and do not extend the chain domain of COL1A1/2 products.

Radon in Estonian buildings. Establishment of a measurement system and obtained results

International Nuclear Information System (INIS)

Pahapill, L.; Rulkov, A.; Swedjemark, G.A.

1996-12-01

One purpose of this project was the establishment of a radon monitoring programme inside the state environmental monitoring programme. Another purpose was to investigate regions, expected to have high radon levels indoors. A new method for the long-term measurement of indoor radon was established and the staff for these measurements was trained. The results of the measurement can be used by Estonian decision-makers to work out rules and standards. There is no legislative act in the field of radiation in Estonian at this time. To summarize the results of the measurements we can say that indoor radon concentrations vary by region. The radon investigations must be continued to identify the risk areas and types of housing construction. The results of the state radon monitoring are provided to the municipalities, who advice the owners of planned new houses to select the right construction for the house. A new project will follow with an investigation of radon in randomly selected dwellings, training and equipment for radon measurement in soil, and general advice with regard to radon, as well as assistance in preparing information about radon. 7 refs, 5 figs

The Perceived Impact of External Evaluation: The System, Organisation and Individual Levels-Estonian Case

Science.gov (United States)

Seema, Riin; Udam, Maiki; Mattisen, Heli; Lauri, Liia

2017-01-01

The purpose of this article is to provide an overview of how the employees of higher education institutions perceive the impact of external evaluations. The study was conducted using the concurrent mixed method and involved 361 employees from Estonian universities and professional higher education institutions. The results indicated that…

Assessment of the Estonian Research Development Technology and Innovation Funding System

OpenAIRE

Nedeva, Maria; Georghiou, Luke

2003-01-01

The objectives of the assessment of the RDTI funding system in Estonia as specified by the Terms of Reference are as follows: 1) to conduct a review of the current R&D funding system in Estonia; 2) to review the objectives of the Estonian R&D Strategy 2002-2006; 3) to review best practice in R&D funding elsewhere; and 4) to propose an efficient, transparent and accountable R&D funding system.

Gender Advantages and Gender Normality in the Views of Estonian Secondary School Students

Science.gov (United States)

Kuurme, Tiiu; Kasemaa, Gertrud

2015-01-01

The aim of the study on Estonian secondary school students was to obtain an overview of the gender-related views and experiences of the everyday school life by students, and to analyse the school-related factors in the development of gender roles and gender-related expectations. We view gender equality as a central condition for social…

Re-conceptualizing mother tongue tuition of Estonian abroad as a transnational phenomenon

Directory of Open Access Journals (Sweden)

Maarja Siiner

2017-05-01

Full Text Available The governmental initiative called the Compatriots Programme, which supports language tuition in Estonian schools and societies abroad, reveals an increased interest in developing intergenerational language transmission in the growing Estonian diaspora. This transnational language political activity signals a new era in language policy, where nation states are increasingly decentralized by migration. The evaluation of the program furthermore reveals that organizing such schools requires a willingness to take language political agency, typically conducted by well-educated and well-integrated resourceful transnational multilingual parents. The present article outlines the results of an ethnographic study of the process of establishing the Estonian School in Copenhagen. This step has demanded a change in the mindset still prevailing in Estonia that language political activities, such as planning language acquisition, are solely the responsibility of the state. Since the prevailing language ideology in Denmark is not favorable towards multilingualism in migrant languages, intergenerational language transmission furthermore presupposes a feeling of ownership of the language and high language self-esteem. "Hargmaise keelepoliitika sünd. Eesti keeleõppe korraldamise võimalikkusest välismaal Taani näitel" Hargmaisus, kasvav väljarändajate arv ja sellega ka eesti keele rääkijate hulk välismaal on jätnud oma jälje eesti keelepoliitikale. Kui varem uuriti peamiselt seda, kuidas eesti keel muukeelses kontekstis muutub, siis viimasel kümnendil on riik asunud aktiivselt toetama eesti keele jätkuvat kasutamist välismaal, rahastades rahvuskaaslaste programmi abil haridusprogramme. Kuid millised faktorid määravad selle, kas uus eestlaste põlvkond oskab ja tahab eesti keelt rääkida? Artikkel hindab etnograafilises ja sotsiolingvistilises võtmes Kopenhaagenis kolm aastat tegutsenud Eesti Kooli ja Lasteklubi näitel, millised on keelekasutust

Seltsi muuseumist riigi keskmuuseumiks: ikka ajutiste lahendustega / Changes in the Estonian National Museum from 1909 to the present.

Directory of Open Access Journals (Sweden)

Krista Aru

2011-01-01

Full Text Available Changes in the Estonian National Museum from 1909 to the presentThe Estonian National Museum was founded in Tartu in 1909 as part of the national movement. With its activities and connections in society, the ENM helped create Estonian society, the nation’s collective memory and identity.The ENM has always been – despite the changing locations, names, and content – one of the symbols of national identity. But at the same time, ENM has never had its own building designed specially for the museum’s purposes.Since 1909 there have been several attempts to establish a home for the ENM. At first (1909–1923, Estonian society wanted to establish the museum in the center of Tartu. The museum was intended to become a key institution of the growing nation and establishing the nation’s identity.At last in 1923 the ENM secured the Raadi manor, outside the center of the city, in a beautiful park, near the lake with its boats and water attractions. In this manor the first permanent exhibition of mainly 19th century Estonian peasant life was compiled, and the ENM operated in the Raadi manor from 1923–1940 as the “Estonian’s own museum” The years of alternating occupations, World War II, and political terror damaged and destroyed the whole society. The Raadi manor was destroyed in the war too, and the ENM itself was divided into two parts – the State Ethnographic Museum and the State Literary Museum. The collections of the ENM were given to Tallinn and to many different places inside and outside Tartu. Then began “the period of temporary location” that continues today. The museum is located in several places in the city of Tartu.In 1988, the prior name of the State Ethnographic Museum – the Estonian National Museum – was reinstated. Since the 1990s there have been many attempts to secure a special building for the ENM. Now, at last, as a result of serious economic pressure, we are closer to this goal than ever. During the last five

Vene kirjandus venestusaja eesti koolides. Russian Literature in the Estonian Schools of the Russification Era

Directory of Open Access Journals (Sweden)

Ülle Pärli

2012-04-01

Full Text Available This article aims to give an overview of literary instruction in schools of the russification era at the beginning of the 20th century in Estonia; this was likewise the curriculum of literary study offered to the generation of educated youth which included the Young Estonians. Based on official documents, archival materials, and memoirs, and through analyses of anthologies, literary histories, and teaching methods in use at the time, we attempt to reconstruct the outlines of literary reading and requirements for students in various types of schools. When, as a result of school reform, Russian became the language of instruction; lessons in Russian became central in the curriculum, alongside the word of God; selections from Russian literature were read in the original language. In the lower grades, teaching was by the so-called ”natural method”, intended to guarantee swift achievement of fluency in ”living Russian language”; this was later replaced by systematic textual analysis, which distinguished between belles lettres and other types of texts. However, the study of literature was always subordinated to the goals of language instruction. In institutions of secondary education, study of Russian literature was separate from language instruction. Indeed, Russian literature was the only literature systematically studied in high schools (though one must keep in mind that not all schools completely followed the official program. Private schools were especially noticeable for their greater freedom, though all of them had to take general curriculum directives into account. Reading of literary texts connected with other languages thus had to remain almost purely illustrative. In view of the above, in the upper grades of elementary school and high school, students obtained a thorough introduction to the Russian classics. According to the official school curriculum, Russian literary history ended with Nikolai Gogol. Attempts were made to ignore

[Encapsulated voices : Estonian sound recordings from the German prisoner-of-war camps in 1916-1918] / Tõnu Tannberg

Index Scriptorium Estoniae

Tannberg, Tõnu, 1961-

2013-01-01

Arvustus: Encapsulated voices : Estonian sound recordings from the German prisoner-of-war camps in 1916-1918 (Das Baltikum in Geschichte und Gegenwart, 5). Hrsg. von Jaan Ross. Böhlau Verlag. Köln, Weimar und Wien 2012

Estonian Perceptions of Security: Not Only About Russia and the Refugees

OpenAIRE

Veebel Viljar; Ploom Illimar

2016-01-01

The current study focuses on the Estonian perceptions of security and on the defence situation both globally and locally. The dynamic results of the public opinion surveys on security risks conducted in Estonia over the last 10 years (2006-2016) will be presented. In addition, to understand whether some of the security risks could be over- or underestimated in Estonia, these results will be compared with the views expressed recently by the World Economic Forum, particularly the Global Risks R...

How to Improve the Supportive Role of Estonian Innovation System toward Launching New Products by High Technology Companies?

Directory of Open Access Journals (Sweden)

Liisi Sepp

2013-01-01

Full Text Available The purpose of the study is to evaluate how supportive is Estonian national innovation system toward the launching of new innovative products by high technology firms. The article intends to combine two broad areas of research – national innovation system approach and the different models of the new product launching. Based on the literature review and in-depth analysis of three case studies of Estonian high-tech company’s major barriers as well success factors of highly innovative product launches were identified. The barriers of the new product launching were linked with the systemic failures of the national innovation system. The most relevant failures of Estonian national innovation system inhibiting the new product development are capability and networking failures. The sources of innovation of high-technology firms are too narrow, linkages with domestic firms and higher education institutions as well with foreign firms are poorly developed. High-tech firms have also serious capacity problems due to the extremely weak support mechanism by national innovation system on the seed funding stage of product development and prototype building stage as well. Paper argues that resources needed for the innovation should not be looked too narrowly following linear innovation model approach. Instead interactive approach is needed, which combines capability building, network development, interactive learning with direct investments into fundamental research.

Tõlkepärl eesti ilukirjanduse algusaegadest – esimene eestikeelne robinsonaad / A Translation Gem from the Beginnings of Estonian Literature - the First Robinsonade

Directory of Open Access Journals (Sweden)

Ave Mattheus

2015-06-01

Full Text Available Teesid: Artiklis uuritakse Eesti Kirjandusmuuseumis asuvat mahukat, ligi 800 lk tõlkekäsikirja „Norem Robinson“, mida võib pidada esimeseks eesti kirjanduse täiemahuliseks robinsonaadiks. Selle valmistas Pärnu koolmeister Heinrich Gottlieb Lorenzsonn saksa pedagoogi ja koolikirjaniku Joachim Heinrich Campe menukast noorsooromaanist „Robinson der Jüngere“ (1779–1780. Tõlge valmis 1822.–1823. aastal, kuid jõudis trükki alles 1842. aastal tugevasti kärbitud ja mugandatud kujul. Toetudes deskriptiivse tõlkeuurimuse analüüsikategooriatele, vaadeldakse artiklis, millised tegurid tõlkeprotsessi suunasid ja milline oli kultuuriruum, kuhu tõlge omal ajal paigutus. SU M M A R Y This article discusses a voluminous manuscript translation of almost 800 pages entitled Norem Robinson (Engl. Robinson the Younger, from the collections of the Estonian Literary Museum. This manuscript can be considered as the first complete Robinsonade in Estonian literature. Its author is a schoolteacher from Pärnu, Heinrich Gottlieb Lorenzsonn (1803–1847, who translated it from the youth novel Robinson der Jüngere(1779–1780, Engl. Robinson the Younger, a bestseller by the educator, writer and a major representative of German Enlightenment, Heinrich Joachim Campe. Lorenzsonn’s translation was completed in 1822–1823, but not printed until 1842 in a strongly adapted version titled Norema Robinsoni ello ja juhtumised ühhe tühja sare peäl (Engl. The Life and Adventures of Robinson the Younger on a deserted island. The print version of the Robinsonade lacks a pedagogical frame story, where the father tells children about the adventures of Robinson and takes the opportunity to discuss and imitate with children all the actions taken by Robinson the Younger. Due to this and other extirpated parts, the possible target audience was enlarged – besides children and youth, the text was now addressed to adults as well. In accordance with the

Short outlines of books by Estonian authors : [annotations] / Rutt Hinrikus, Janika Kronberg

Index Scriptorium Estoniae

Hinrikus, Rutt, 1946-

1998-01-01

Laretei, Käbi. Eksiil; Toona, Elin. Lotukata; Park, Eeva. Naeru õpilane; Luik, Viivi. Inimese kapike; Laaman, Ilona. Vesi ahjus; Viiding, Juhan (Üdi, Jüri). Kogutud luuletused; Paju, Juhan. Katkenud romaan; Paju, Juhan. Hõõguv rist; Estonian short stories / toim. Kajar Pruul ja Darlene Reddaway; Traat, Mats. Kartaago kiirrong; Kauksi Ülle. Säng; Kross, Jaan. Paigallend; Puhvel, Madli. Symbol of dawn; Kaplinski, Jaan. Võimaluste võimalikkus; Kaplinski, Jaan. Usk on uskmatus

The dominance of indirect taxes in Estonian state budget. Summary:Kaudsete maksude dominant Eesti riigieelarve tuludes

Directory of Open Access Journals (Sweden)

Olev Raju

2013-09-01

Full Text Available Recession has sharply erected the question of tax burden and the optimal proportion of different kinds of taxes among the incomes of the budget. Indirect taxes and consumption taxes, which proportion is different according to different methodologies, dominate in Estonian state budget. The buoyancy of a tax system based on taxes of that kind is especially weak during the recession. The purpose of Estonian government’s economic policy during the highest peak of crisis was to keep the budget in balance. Instead of recovering economy the taxes were arisen and costs were reduced. The results of such a policy aren’t still clear. Difficulties concerning the incomes of budget have arisen the necessity for lifting taxes, which is possible as the tax burden is low now. But a sharp question of the optimal level of taxes is going to be raised. A formula for indirect tax optimum according to Ramsey taxes and Slutski decomposition has been proposed in the article

The Estonian diaspora in South-West Russia in the 1920—30s: migration results

Directory of Open Access Journals (Sweden)

Stupin Yuri

2010-11-01

Full Text Available This article analyses the spatial features of the settling of Russian Estonians in the Northwest region at the “zenith” of diaspora on the basis of 1920, 1926, and 1939 censuses. The author identifies the principal settling areas and points out the geographical preconditions for the rapid decline of the diaspora.

Exploring Constructivist Social Learning Practices in Aiding Russian-Speaking Teachers to Learn Estonian: An Action Research Approach

Science.gov (United States)

Kiilo, Tatjana; Kutsar, Dagmar

2012-01-01

Based on appreciative inquiry and threshold concepts from an intercultural learning perspective, the article makes insights into the constructivist social learning practice of Estonian language learning amongst Russian-speaking teachers in Estonia. The application of educational action research methodology, more specifically that of Bridget…

Non-market value of Estonian seminatural grasslands: a contingent valuation study. Eesti poolloodusliku rohumaa turuväline väärtus: tingliku hindamise uuring

Directory of Open Access Journals (Sweden)

Helli Lepasaar

2015-12-01

Full Text Available Seminatural grasslands i.e. the floodplain meadows, seashore meadows, wooded meadows, dry meadows, wooded pastures are the very traditional part of Estonian landscapes, which play an important role in the appearance of the landscape in general and also serve as an important habitat for many plant and animal species. In order to preserve the seminatural grasslands continuous annual mowing and/or pasturing is needed. This activity is not economically profitable and needs subsidizing. The authors of the work raise a hypothesis that the Estonian seminatural grasslands could be viewed as a valuable non-market environmental good for which a significant public demand exists. In order to find out the non-market value of the seminatural grasslands a contingent valuation study was carried out among the Estonian working-age population (size of the sample 1061 individuals. The average individual willingness to pay was 11.3 euros. During the study, the authors constructed the total demand function and discovered that the total annual demand for seminatural grasslands was 17.9 million euros.

The 2011 Estonian High School Language Reform in the Context of Critical Language Policy and Planning

Science.gov (United States)

Skerrett, Delaney Michael

2014-01-01

This paper seeks to situate Estonian language use and policy within the emerging field of critical language policy and planning (CLPP) by investigating the discourses that frame linguistic behaviour. This done by way of an analysis of a series of interviews carried out with key actors in language policy in Estonia. The discourses framing language…

The Challenges Organic Food Processors Meet at Small Emerging Market – Estonian Case

OpenAIRE

Sarapuu, Kerttu; Pehme, Sirli; Peetsmann, Elen; Matt, Darja

2014-01-01

Organic farming and demand for organic products is continually a growing trend all over the world (Willer et al., 2013). In Estonia the share of organic land is 15% of all agricultural land and the number of organic farmers is also growing (Vetemaa, Mikk 2013). Estonian organic food market is still in forming stage being affected by local organic farming development, marketing situation, economic situation and consumer attitudes. Organic processing has clearly not kept up with organic farming...

The Dominance of Indirect Taxes in Estonian State Budget

Directory of Open Access Journals (Sweden)

Olev Raju

2013-01-01

Full Text Available Recession has sharply erected the question of tax burden and the optimal proportion of different kinds of taxes among the incomes of the budget. Indirect taxes and consumption taxes, which proportion is different according to different methodologies, dominate in Estonian state budget. The buoyancy of a tax system based on taxes of that kind is especially weak during the recession. Difficulties concerning the incomes of budget have arisen the necessity for lifting taxes, which is possible as the tax burden is low now. But a sharp question of the optimal level of taxes is going to be raised. A formula for indirect tax optimum according to Ramsey taxes and Slutski decomposition has been proposed in the article.

Mental health and alcohol problems among Estonian cleanup workers 24 years after the Chernobyl accident.

Science.gov (United States)

Laidra, Kaia; Rahu, Kaja; Tekkel, Mare; Aluoja, Anu; Leinsalu, Mall

2015-11-01

To study the long-term mental health consequences of the 1986 Chernobyl nuclear accident among cleanup workers from Estonia. In 2010, 614 Estonian Chernobyl cleanup workers and 706 geographically and age-matched population-based controls completed a mail survey that included self-rated health, the Posttraumatic Stress Disorder Checklist (PCL), alcohol symptoms (AUDIT), and scales measuring depressive, anxiety, agoraphobia, fatigue, insomnia, and somatization symptoms. Respondents were dichotomized into high (top quartile) and low symptom groups on each measure. Logistic regression analysis detected significant differences between cleanup workers and controls on all measures even after adjustment for ethnicity, education, marital status, and employment status. The strongest difference was found for somatization, with cleanup workers being three times more likely than controls to score in the top quartile (OR = 3.28, 95% CI 2.39-4.52), whereas for alcohol problems the difference was half as large (OR = 1.52, 95% CI 1.16-1.99). Among cleanup workers, arrival at Chernobyl in 1986 (vs. later) was associated with sleep problems, somatization, and symptoms of agoraphobia. The toll of cleanup work was evident 24 years after the Chernobyl accident among Estonian cleanup workers indicating the need for focused mental health interventions.

Proficiency Assessment of Male Volleyball Teams of the 13-15-Year Age Group at Estonian Championships

Science.gov (United States)

Stamm, Meelis; Stamm, Raini; Koskel, Sade

2008-01-01

Study aim: Assessment of feasibility of using own computer software "Game" at competitions. Material and methods: The data were collected during Estonian championships in 2006 for male volleyball teams of the 13-15-years age group (n = 8). In all games, the performance of both teams was recorded in parallel with two computers. A total of…

Where Do Dead Books Go? The Problem of the Soviet Canon Today, on the Example of Johannes Becher's Work in Estonian

Directory of Open Access Journals (Sweden)

Katre Talviste

2013-06-01

Full Text Available The article describes the conception and editing process of an anthology of Johannes Becher’s poems (Unistades täiusest, 1962 in Estonian, and discusses its status in the Soviet and contemporary literary canon. The work on the Becher anthology was led by an already outstanding literary scholar Nigol Andresen and a young poet and translator Ain Kaalep, who later became one of the most prolific and wellknown poetry translators in Estonia. An important part was also played by another poet-translator, August Sang, who already had achieved such a standing in the Estonian literary field. Several other translators contributed to the anthology, making it a common project for intellectuals otherwise very differently positioned vis-à-vis the Soviet political authorities and cultural agendas. Becher’s work was strongly promoted by these instances, but his poetry was also read with genuine enthusiasm by the main contributors to the anthology (whose own poetry has certain parallels to some aspects of Becher’s, as well as the general public, at that time. After the fall of the Soviet regime it has been forgotten, mostly for the same contextual reasons that once granted its success. The case of his poetry in Estonian explores the question of this new invisibility of now politically irrelevant, but still voluminous and aesthetically intriguing literary works in the post-Soviet canon.

With or without articles? A comparison of article-like determiners in Estonian and Finnish

Directory of Open Access Journals (Sweden)

Helen Hint

2017-10-01

Full Text Available In this paper, we compare the use and functions of definite and indefinite article-like determiners in Estonian and Finnish. Our main aim is to explore whether the factors that explain the choice of particular determiner forms are similar in Estonian and Finnish. We use a picture-sequence based elicitation experiment to collect spoken narratives from adult native speakers of Estonian and Finnish, and apply non-parametric tree and forest models to analyze the data. Our findings indicate that number of mention and animacy are important predictor variables in both languages, but their exact effect is divergent. We also find that in Finnish, case of the determiner NP proves to be an important factor, while in Estonian, syntactic role of the NP explains some aspects of determiner form choice. Nevertheless, the overall usage frequency of determiners is modest in the Estonian and Finnish data, and the process of grammaticalizing articles is only in initial stages in both languages. *** Artikliga, artiklita? Eesti ja soome keele artiklilaadsete määratlejate võrdlus Siinses uurimuses analüüsime võrdlevalt artiklilaadseid definiitseid ja indefiniitseid määratlejaid eesti ja soome keeles. Eelkõige kõrvutame eesti keele definiitset määratlejat see ja soome keele definiitseid määratlejaid se ja tämä ning eesti ja soome indefiniitset määratlejat üks/yks(i. Samuti vaatleme eesti keele possessiivpronoomeni oma ning soome 3sg possessiivsufiksi (-nsa/-nsä, -Vn referentsiaalseid omadusi. Uurimuse põhieesmärgiks on selgitada, millised on peamised määratlejate kasutust mõjutavad keelelised faktorid eesti ja soome keeles ning kas need faktorid on keeliti sarnased või erinevad. Ühtlasi otsime vastust küsimusele, kas eesti ja soome keeles on põhjust rääkida määratlejate grammatisatsioonist artikliteks. Uuritav keelematerjal pärineb pildiseeria põhjal kogutud suulistest narratiividest. Uurimuses osales 20 eesti ja 20 soome keele

Noor-Eesti enesekoloniseerimisprojekt. Teine osa Olulised kirjandusmõtteviisid . The Self-Colonization Project of Young Estonia. Part II. Modes of Literary Thinking and Relations with Colonialism in Estonian Literature of the beginning of the 20th century

Directory of Open Access Journals (Sweden)

Tiit Hennoste

2012-04-01

Full Text Available The topic of this article is the literary discourse of Young Estonia; its relations with other important Estonian literary discourses from the beginning of the 20th century, and its relations with colonial cultural discourse. First, I give an overview of the basic positions of the Young Estonians’ literary discourse, the main shapers of which were Friedebert Tuglas, Gustav Suits, later on Johannes Semper as well. Next, I present the basic principles of three Estonian literary discourses from the beginning of the 20th century, which were also important to the Young Estonians: nationalist-naturalistic (close-to-life; socialist/ class-based, and 20th century modernist. The Young Estonians began as nationalists and/or socialists. During the formation of Young Estonia’s discourse at the end of the first and beginning of the second decade of the 20th century, 20th century modernism began, which the Young Estonians regarded first and foremost with irony. The Young Estonians’ literary discourse is a mixture of aestheticism, decadence, symbolism, romanticism, and classicism. The point of departure for the Young Estonian approach to literature was eurocentrism. They took a superior and negative view of existing Estonian literature, which they regarded as having fallen drastically behind Europe. Since it was unable to build on its own foundation, it had to borrow from Europe. The discourse’s understandings of cultural values – theory, reading, knowledge, ready-made culture, derive from the centrality of the dynamic of borrowing. New culture could be created freely, without the support of previous local tradition; it was to be an elite culture, while the writer remained an individualist. Literature was to follow the principle of art for art’s sake; aesthetics and the form of the work of art were basic criteria. The formal ideals of the work of art were classicist: unity, integrity (wholeness, harmony, order, logic, etc. Thirdly, I outline the

From waste to traffic fuel (W-fuel)

Energy Technology Data Exchange (ETDEWEB)

Kask, Ue.; Andrijevskaja, J.; Kask, L. [and others

2012-11-01

The EU directive on the promotion of the use of energy from renewable sources (Directive 2009/28/EC) sets a mandatory minimum target for the use of fuels produced using renewable energy sources of 10% of total petrol and diesel consumption in the transport sector by the year 2020. In addition, it states that production of renewable fuels should be consistent with sustainable development and must not endanger biodiversity. In the INTERREG IVA Southern Finland - Estonia Sub-programme, efforts towards finding solutions to the tasks set by the EU were undertaken in co-operation with Finnish and Estonian researchers. The purpose of the 'From Waste to Traffic Fuel' (W-Fuel) project was to promote the sustainable production and use of biogas using locally-sourced biodegradable waste materials from the food and beverage industry and the agricultural and municipal sectors. The ultimate aim of the project was to upgrade the biogas (produced based on anaerobic digestion of biodegradable wastes, sludge, manure, slurry and energy crops) to biomethane with a methane content similar to natural gas, to be further used as transport fuel with the aim of reducing traffic-borne emissions, in particular CO{sub 2}. The project combined waste, energy and traffic solutions in order to decrease emissions, costs and the use of materials. Six case areas in southern Finland and northern Estonia were selected. The two case areas in Estonia were the counties of Harju and Laeaene-Viru in northern Estonia. The project aimed to promote waste and sludge prevention and to commence biogas production and its subsequent upgrading to biomethane for use as a renewable fuel. The project promoted regional businesses and employment in waste treatment and 'green energy' production. On basis of the gathered data, the biogas potentials and prerequisites of each case county were analysed. Furthermore, the environmental, economic and other regional effects of the different options were

Radon in Estonian dwellings - Results from a National Radon Survey

Energy Technology Data Exchange (ETDEWEB)

Pahapill, Lia; Rulkov, Anne; Rajamaee, Raivo [Estonian Radiation Protection Centre (Kiirguskeskus), Tallinn (Spain); Aakerblom, Gustav [Swedish Radiation Protection Authority, Stockholm (Sweden)

2003-10-01

A countrywide survey of radon concentrations in Estonian dwellings was carried out during the period 1998-2001. The survey formed a part of the cooperation program on radiation protection between the Estonian Radiation Protection (Kiirguskeskus) Centre and the Swedish Radiation Protection Authority (SSI). The survey included measurements in a number of dwellings representative for Estonia in detached houses and multifamily buildings (only dwellings on the bottom floor were included in the survey). Altogether, radon concentrations were measured in 515 dwellings, a number large enough to be statistically significant. All measurements were made with alphatrack film detectors of the same type that SSI uses in Sweden. The measurements were made during a 2-3 month period during the winter half-year. Two detectors were used in each dwelling. In Estonia there are 0.17 million dwellings in detached houses and 0.45 million in multi apartment buildings. Of the 1.26 million inhabitants in Estonia. 0.36 million live in detached houses and 0.90 million in multi apartment buildings. Most of the latter were built during the Soviet occupation. Of the dwellings in multifamily buildings 30 % are assumed to be situated on the first floor. The mean radon concentration in dwellings in detached hoses, according to the survey results, is 103 Bq/m{sup 3}, in dwellings on the bottom floor in multi apartment buildings it is 78 Bq/m{sup 3}. In 1% of the dwellings the radon concentration exceeded 400 Bq/m{sup 3}. The highest radon concentration found in the study was 1040 Bq/m{sup 3}. Based on the assumption that the average radon concentration in the dwellings in multi-apartment buildings that are not situated on the bottom floor is 30 Bq/m{sup 3}, and that these dwellings constitute 70% of all dwellings in multi apartment buildings, the mean radon concentration in dwellings in multi apartment buildings is calculated to be 44 Bq/m{sup 3}. The mean value for all Estonia dwellings is calculated

Radon in Estonian dwellings - Results from a National Radon Survey

International Nuclear Information System (INIS)

Pahapill, Lia; Rulkov, Anne; Rajamaee, Raivo; Aakerblom, Gustav

2003-10-01

A countrywide survey of radon concentrations in Estonian dwellings was carried out during the period 1998-2001. The survey formed a part of the cooperation program on radiation protection between the Estonian Radiation Protection (Kiirguskeskus) Centre and the Swedish Radiation Protection Authority (SSI). The survey included measurements in a number of dwellings representative for Estonia in detached houses and multifamily buildings (only dwellings on the bottom floor were included in the survey). Altogether, radon concentrations were measured in 515 dwellings, a number large enough to be statistically significant. All measurements were made with alphatrack film detectors of the same type that SSI uses in Sweden. The measurements were made during a 2-3 month period during the winter half-year. Two detectors were used in each dwelling. In Estonia there are 0.17 million dwellings in detached houses and 0.45 million in multi apartment buildings. Of the 1.26 million inhabitants in Estonia. 0.36 million live in detached houses and 0.90 million in multi apartment buildings. Most of the latter were built during the Soviet occupation. Of the dwellings in multifamily buildings 30 % are assumed to be situated on the first floor. The mean radon concentration in dwellings in detached hoses, according to the survey results, is 103 Bq/m 3 , in dwellings on the bottom floor in multi apartment buildings it is 78 Bq/m 3 . In 1% of the dwellings the radon concentration exceeded 400 Bq/m 3 . The highest radon concentration found in the study was 1040 Bq/m 3 . Based on the assumption that the average radon concentration in the dwellings in multi-apartment buildings that are not situated on the bottom floor is 30 Bq/m 3 , and that these dwellings constitute 70% of all dwellings in multi apartment buildings, the mean radon concentration in dwellings in multi apartment buildings is calculated to be 44 Bq/m 3 . The mean value for all Estonia dwellings is calculated to be 60 Bq/m 3 . Using

Ärkamisaeg, Noor-Eesti ja miski nende vahel. Eesti kirjandusloo küsimusi Juhan Kunderi näitel / National Awakening , Young Estonia and Something In Between. Problems of Estonian Literary History in the Example of Juhan Kunder

Directory of Open Access Journals (Sweden)

Pille-Riin Larm

2013-12-01

Full Text Available According to the long-standing periodisation of Estonian literary history, the Estonian National Awakening that started in the mid-19th century was followed by a period of lesser creativity and originality, which ended only with the breakthrough of the modernist Young Estonia group in 1905. In the canon of Estonian literature, Juhan Kunder (1852–1888, today known primarily for his fairy tales, one play and lyrics of one song, is placed in this intermediate period. This article first introduces the significance of Kunder in his time. He was a popular writer and a wellknown pedagogue, and a younger contemporary of the great figures of the National Awakening. As a critic, magazine editor and literary historian, his most important contribution to literary history was in the development of literary thought. It seems that several precedents that have been attributed to the Young Estonia group, e.g., valuing originality, writing well-argued criticism, etc., actually originated from an earlier period. Based on these observations, the author of this article believes that the current structure of Estonian literary history is not adequately justified, and she points out a semantic shift in the terms in use. It is true that Kunder was largely an epigone of his predecessors, but in the positive sense of the term, meaning that he continued their mission. Similarly, Kunder’s predecessor, the ‘first Young Estonian’ Kreutzwald, and a representative of his 20th-century successors, Friedebert Tuglas, were also epigones. During the period of Russification that started during his era, Kunder’s attitudes could be considered progressive. Kunder was also a 19th-century contemporary of the Young Estonia group and a true Young Estonian in the original sense of the term which emerged in this period: a Young Estonian introduced new initiatives and was a leader of the national movement. Epigonism and membership in Young Estonia can be seen as the keys to cultural

Estonian experience in establishing the national radiation protection infrastructure in the newly independent State

International Nuclear Information System (INIS)

Kalam, J.

2001-01-01

The Estonian Radiation Protection Centre (ERPC) was established on 4 January 1996 as the regulatory authority for radiation protection and safety of radiation sources. The report explains the ERPC's structure and its main functions and activities, and provides information on the regulations that have been approved or are planned to be adopted. Reference is made to radiological emergency preparedness and, in particular, to the status of development of the system of regulatory control by authorization and inspection of radiation practices in the country. (author)

Is Estonian oil shale beneficial in the future?

International Nuclear Information System (INIS)

Reinsalu, Enno

1998-01-01

Oil shale mining production reached its maximum level of 31.35·10 6 tonnes per year in 1980. After the eighties there was a steady decline in mining. The first scientific prognoses of the inescapable decrease in oil shale mining were published in 1988. According to this, the Estonian oil shale industry would vanish in the third decade of the next century. From the beginning of the nineties, the consumption and export of electricity have dropped in Estonia. The minimum level of oil shale mining was 13.5·10 6 tonnes per year. This occurred in 1994/1995. Some increase in consumption of electric power and oil shale began at the end of 1995. Oil shale processing began to increase gradually in 1993. Oil shale is the most important fuel in Estonia today. In 1997, oil shale provided 76% of Estonia's primary energy supply and accounted for 57% of its economic value. Oil shale is the cheapest fuel in Estonia. Nowadays, oil shale provides an essential part of the fuel supply in Estonia because it is considerably cheaper than other fuels. Oil shale costs EEK 12.16 per G J. At the same time, coal costs EEK 23.41 per G J and peat costs EEK 14.80 per G J (year 1997). There are three important customers of oil shale: the electric power company Eesti Energia, the oil processing company Kiviter and the factory Kunda Nordic Cement. In 1995, the power company utilised 81% of the oil shale mass and 77% of its heating value. The state energy policy inhibits increases in the oil shale price even though the mining infrastructure is decaying. Government price policies subside oil shale processing. The energy of oil shale processing is 1.9 times cheaper than the heating value of raw oil shale for power stations. It could be considered as a state subsidisation of oil and cement export at the expense of electricity. The subsidy assigned to oil processing was of EEK 124·10 6 and to the cement industry of EEK 8.4·10 6 in year 1997 (based on heating value). State regulation of prices and

Riik võib lüüa SAS-i esmaspäevaks Estonian Airi omanikeringist välja / Erik Müürsepp, Mikk Salu

Index Scriptorium Estoniae

Müürsepp, Erik

2008-01-01

SAS osaleb Estonian Airþile lisakapitali eraldamises ainult juhul, kui Eesti riik müüb oma osaluses lennukompaniis SAS-ile. Peaminister Andrus Ansipi ning majandus- ja kommunikatsiooniminister Juhan Partsi seisukoht

Jüri Okas’ ‘specific objects’: diverging discourses in Estonian Art in the 1970s.

OpenAIRE

Kurg, Andres.

2003-01-01

Previously in the University eprints HAIRST pilot service at http://eprints.st-andrews.ac.uk/archive/00000367/ Article 3 of 6 in issue devoted to the visual culture of the Scandinavian and Baltic region. This article will look at the early works of Estonian architect and artist Jüri Okas and will try to work between diverging languages and interpretations, reading works by Okas against the background of Anglo-american conceptualism and minimalism of the same period. The first part of th...

Bernhard Linde. Noor-Eesti vooriülem. Bernhard Linde. Leader of the Young Estonian Pack

OpenAIRE

Jaanus Kulli

2012-01-01

Bernhard Linde (1886–1954) was a recognized and prolific Estonian theatre critic of the first quarter of the 20th century, who mediated and propagated western as well as eastern European theatrical innovations. In addition, he was active as a literary and art critic, publisher, and proponent of libraries, to a modest extent he was a prose writer and poet. Unquestionably, however, Bernhard Linde’s most prominent role was as one of the founding members of the literary movement Young Estonia. He...

Economic modelling of the capture-transport-sink scenario of industrial CO2 emissions: The Estonian-Latvian cross-border case study

NARCIS (Netherlands)

Shogenova, A.; Shogenov, K.; Pomeranceva, R.; Nulle, I.; Neele, F.; Hendriks, C.

2011-01-01

Industrial CO2 emissions and opportunities for CO2 geological storage in the Baltic Region were studied within the EU GeoCapacity project supported by the European Union Framework Programme 6. Estonia produces the largest amounts of CO2 emissions in the region, due to the combustion of Estonian oil

Rahvusliku ajaloo tõlgendusi eesti draamas ja teatris 1970.–1980. aastatel. Interpretations of National History in Estonian Drama and Theatre in the 1970s–1980s

Directory of Open Access Journals (Sweden)

Piret Kruuspere

2012-04-01

Full Text Available According to theatre scholar Freddie Rokem, theatre portraying or performing historical events is seeking to overcome both the separation and the exclusion from the past, as well as ’striving to create a community where the events from this past will matter again’. This article covers the topic of interpretations of national history in Estonian theatre and in original dramaturgy during the Soviet era, with the focus on aspects like national self-reflection and the relationship to the common past. The main focus is on the 1970s, with examples from Rein Saluri’s, Mati Unt’s and Jaan Kaplinski’s drama productions. During the period in question, re-tellings of national history on Estonian theatre stages were clothed in metaphors, allusions and secret codes – Aesopian language. Within the Soviet cultural context, I analyse if and to what extent theatre of the time displayed resistance, political theatre or social allegory. Theatre was also connected with the principle of playing or playfulness, which on one hand indicates national resistance, national endurance, and a certain survival strategy, but on the other hand indicates the Estonian as being an involuntary homo ludens – the Playing Man, who through various enforced roles is trying to adjust to the whirlwinds of history. Saluri’s first play, the intellectual drama Külalised (The Guests, opens with an allusion to a drama classic the world over, William Shakespeare’s Hamlet, adding a powerful national-symbolic background to the play. The role-play which permeates and structures the play (The Host–The Guest however, displays allegorical references to changes in the status and self-image of Estonians. In Unt’s play Peaproov (Dress Rehearsal, the principle of playing/acting sheds ironic light on the makers of an historical film and their readiness to create superficially flashy interpretations at any cost: this take acts as an estranging and generalising reflection in a context

The Dialogue with Hamlet: Paul-Eerik Rummo’s “Hamlet’s Songs” as an Example of the Existential Paradigm in Estonian Culture

Directory of Open Access Journals (Sweden)

Anneli Mihkelev

2013-06-01

Full Text Available The article demonstrates different meanings of the motif of Hamlet in the Estonian culture. Hamlet as a literary figure has been very important and influential, a symbol of will and a fighter in a hopeless situation. Paul-Eerik Rummo’s poem “Hamlet’s Songs” (1964 forms the centre around which revolve not only written texts but also many such cultural texts as theatre performances and music, all connected by allusions to Hamlet. Rummo’s poem is one of the most innovative poems from the 1960s in Estonian literature. The generation of the 1960s was influenced by several important contemporary theories, including existentialism. Many young writers systematically undermined the Soviet regime in their works. The use of the motif of Hamlet reveals a similarity between the existential and romantic rebellions. Rummo’s dialogue with Hamlet in his poem expresses optimism in a hopeless situation in a way different from Shakespeare’s.

Sources and distribution of trace elements in Estonian peat

Science.gov (United States)

Orru, Hans; Orru, Mall

2006-10-01

This paper presents the results of the distribution of trace elements in Estonian mires. Sixty four mires, representative of the different landscape units, were analyzed for the content of 16 trace elements (Cr, Mn, Ni, Cu, Zn, and Pb using AAS; Cd by GF-AAS; Hg by the cold vapour method; and V, Co, As, Sr, Mo, Th, and U by XRF) as well as other peat characteristics (peat type, degree of humification, pH and ash content). The results of the research show that concentrations of trace elements in peat are generally low: V 3.8 ± 0.6, Cr 3.1 ± 0.2, Mn 35.1 ± 2.7, Co 0.50 ± 0.05, Ni 3.7 ± 0.2, Cu 4.4 ± 0.3, Zn 10.0 ± 0.7, As 2.4 ± 0.3, Sr 21.9 ± 0.9, Mo 1.2 ± 0.2, Cd 0.12 ± 0.01, Hg 0.05 ± 0.01, Pb 3.3 ± 0.2, Th 0.47 ± 0.05, U 1.3 ± 0.2 μg g - 1 and S 0.25 ± 0.02%. Statistical analyses on these large database showed that Co has the highest positive correlations with many elements and ash content. As, Ni, Mo, ash content and pH are also significantly correlated. The lowest abundance of most trace elements was recorded in mires fed only by precipitation (ombrotrophic), and the highest in mires fed by groundwater and springs (minerotrophic), which are situated in the flood plains of river valleys. Concentrations usually differ between the superficial, middle and bottom peat layers, but the significance decreases depending on the type of mire in the following order: transitional mires - raised bogs - fens. Differences among mire types are highest for the superficial but not significant for the basal peat layers. The use of peat with high concentrations of trace elements in agriculture, horticulture, as fuel, for water purification etc., may pose a risk for humans: via the food chain, through inhalation, drinking water etc.

“... if there’s a party, then there’s definitely alcohol”. Construction of partying practices and abstinence in Estonian youth forums

Directory of Open Access Journals (Sweden)

Parder Mari-Liisa

2015-12-01

Full Text Available AIMS – Adolescents’ abstinence from alcohol has not been much researched in terms of providing suggestions for prevention strategies. This study aims to fill that gap by offering a practice theory-inspired analysis of how the unwritten rules of partying practices are communicated between posters of Estonian youth forums.

Taxes, Estonian state budget and economic crises. Maksud, riigi eelarve ja majanduskriis

Directory of Open Access Journals (Sweden)

Olev Raju

2013-01-01

Full Text Available Recession has sharply erected the question of tax burden and the optimal proportion of different kinds of taxes among the incomes of the budget. Indirect taxes and consumption taxes, which proportion is different according to different methodologies, dominate in Estonian state budget. The buoyancy of a tax system based on taxes of that kind is especially weak during the recession. Difficulties concerning the incomes of budget have arisen the necessity for lifting taxes, which is possible as the tax burden is low now. But a sharp question of the optimal level of taxes is going to be raised. A formula for indirect tax optimum according to Ramsey taxes and Slutski decomposition has been proposed in the article.

Attitudes of Academic Staff towards Their Own Work and towards External Evaluation, from the Perspective of Self-Determination Theory: Estonian Case

Science.gov (United States)

Seema, Riin; Udam, Maiki; Mattisen, Heli

2016-01-01

The purpose of this study was to ascertain the attitudes of academic staff towards their own work as well as towards external evaluations. The study was based on (1) an analysis of assessment reports of institutional accreditations conducted by the Estonian Quality Agency for Higher and Vocational Education and (2) self-determination theory on…

The figure of the teacher in Estonian school discourse

Directory of Open Access Journals (Sweden)

Ott Puumeister

2014-10-01

Full Text Available The article concerns itself with the figure of the teacher in Estonian society. We do not concentrate on the educational system as a whole, but on one specific and crucial element in this apparatus - the teacher. We begin by offering a brief historical overview of the conditions of pedagogues in the 20th century before moving on to describe the adoption of neo-liberal free market policies since the 1990s and the effects these policies had and still have on education. Our main concern is to understand the teacher as an actor in power relations; to achieve this understanding we have selected as our examples 1 surveillance techniques in school environment that have direct relations to the state and the market; and 2 the 2012 educational workers' strike that made it quite clear that the teachers have been fixed to a position of wage workers. The overall and more abstract aim of the paper is to think about the social role of the teacher in Estonia.

Smoking prevalence and attitudes towards smoking among Estonian physicians: results from cross-sectional studies in 2002 and 2014

OpenAIRE

Põld, Mariliis; Pärna, Kersti

2017-01-01

Objectives To explore smoking prevalence and attitudes towards smoking among Estonian physicians in 2002 and 2014. Design Two self-administered cross-sectional postal surveys were conducted among practising physicians in Estonia. Participants Initial sample consisted of all practising physicians in Estonia. The corrected response rate was 67.8% in 2002 and 53.1% in 2014. Present study sample was restricted to physicians younger than 65 years (n=2549 in 2002, n=2339 in 2014). Methods Age-stand...

The Role of Parents and Parental Mediation on 0-3-Year Olds' Digital Play with Smart Devices: Estonian Parents' Attitudes and Practices

Science.gov (United States)

Nevski, Elyna; Siibak, Andra

2016-01-01

In this manuscript, we analyse the attitudes and practices of Estonian parents (N = 198) who allowed their 0-3-year olds to use smart devices. We aimed to discover if there was an interaction between parental use of smart technologies, parents' attitudes and the child's age that would predict young children's usage of smart devices. We also wanted…

The treatment of lexical collocations in EFL coursebooks in the Estonian secondary school context

Directory of Open Access Journals (Sweden)

Liina Vassiljev

2015-04-01

Full Text Available The article investigates lexical collocations encountered in English as a Foreign Language (EFL instruction in Estonian upper secondary schools. This is achieved through a statistical analysis of collocations featuring in three coursebooks where the collocations found are analysed in terms of their type, frequency and usefulness index by studying them through an online language corpus (Collins Wordbanks Online. The coursebooks are systematically compared and contrasted relying upon the data gathered. The results of the study reveal that the frequency and range of lexical collocations in a language corpus have not been regarded as an essential criterion for their selection and practice by any of the coursebook authors under discussion.

Vitality of the Estonian forests (results of the inventory and research)

International Nuclear Information System (INIS)

Karoles, K.

1991-01-01

Factors affecting Estonian forests are: The environmental, specially atmospheric pollution, - the foundation of new forests as monoculture on unsuitable locations, - mechanical damages by unsuitable forest machinery, - unfavourable water conditions, - Heterobasidion or Armillaria rot roots. Local damages in consequence of air pollutants are distributed in environments of Tallinn, Kivioli, Kohtla-Jaerve and the thermal power stations (Narva), where the SO 2 -content in the air is on the average higher than 50 (80) μg/m 3 . Pine forests on dry sand soils (600 ha damaged in 1989) and the older spruce forests show the new type of forest decline. High Al-ion concentration, disturbances of the Ca-Mg-metabolism, an extreme nutrient deficit, (specially N-deficit) and periodical water deficit as well as pathogenic fungi are damaging the trees. Spruces show nonspecific defoliation, needle necrosis, needlefall, occurence of fungal diseases. More damaged are the spruce forests in regions with basic precipitations and high sulphur-deposition. (orig./UWA) [de

Gender differences in factors associated with sexual intercourse among Estonian adolescents.

Science.gov (United States)

Part, Kai; Rahu, Kaja; Rahu, Mati; Karro, Helle

2011-06-01

To examine factors associated with early sexual intercourse among 15 to 16-year-old adolescents by gender. The data were collected from a random sample of Estonian basic schools' ninth grade pupils in 1999 using self-completed questionnaires. A multivariate logistic regression analysis for boys and girls was used to test for associations between sexual intercourse, and personal gender role-related attitudes, attitudes towards sexual intercourse, pubertal timing, smoking status and experience of drunkenness. Of the respondents, 14.6% of boys and 13.1% of girls had experienced sexual intercourse. Traditional gender role-related attitudes were associated with sexual intercourse among girls, but not among boys. Smoking and experience of drunkenness was strongly associated with sexual intercourse for both genders. Gender differences in the association between gender role-related attitudes and early sexual intercourse were observed among 15 to 16-year-olds in Estonia. Smoking and experience of drunkenness were strongly related to sexual intercourse for both genders.

MODELLING DICLOFENAC AND IBUPROFEN RESIDUES IN MAJOR ESTONIAN SEASIDE CITIES

Directory of Open Access Journals (Sweden)

Erki Lember

2016-06-01

Full Text Available A theoretical model was developed to model the fate of two common pharmaceutical residues: diclofenac and ibuprofen in eight Estonian seaside cities that discharge their wastewaters directly into the Baltic Sea. The consumption rates of the active ingredients of diclofenac and ibuprofen from 2006-2014 were analysed. A decrease of 19.9% for diclofenac consumption and an increase of 14.1% for ibuprofen were found. The fate of diclofenac and ibuprofen were modelled by considering the human metabolism removal rate for pharmaceuticals, the removal rate of diclofenac and ibuprofen in activated sludge wastewater treatment plants (WWTP and annual flow rates. An average decrease from 1 to 0.8 µg/l (decrease of 20% for diclofenac and an increase from 11.4 to 13.4 µg/l (increase of 14.9% for ibuprofen for the concentration in the effluents of the WWTP were modelled. The model gives us a good overview about the theoretical concentrations of pharmaceutical residues in the environment and is helpful for evaluating environmental impacts.

Determination of Heating Value of Estonian Oil Shale by Laser-Induced Breakdown Spectroscopy

Directory of Open Access Journals (Sweden)

M. Aints

2018-01-01

Full Text Available The laser-induced breakdown spectroscopy (LIBS combined with multivariate regression analysis of measured data were utilised for determination of the heating value and the chemical composition of pellets made from Estonian oil shale samples with different heating values. The study is the first where the oil shale heating value is determined on the basis of LIBS spectra. The method for selecting the optimal number of spectral lines for ordinary multivariate least squares regression model is presented. The correlation coefficient between the heating value predicted by the regression model, and that measured by calorimetric bomb, was R2=0.98. The standard deviation of prediction was 0.24 MJ/kg. Concentrations of oil shale components predicted by the regression model were compared with those measured by ordinary methods.

Corporate Governance from the Perspective of Stakeholder Theory and in Light of Perceptions among Estonian Owners and Managers of Relations with Stakeholders / Mari Kooskora

Index Scriptorium Estoniae

Kooskora, Mari, 1969-

2006-01-01

Äriühingute valitsemise kontseptsioon ja teoreetiline taust; Eesti omanike ja tippjuhtide ootused suhetes erinevate huvigruppidega ning äriühingute valitsemine huvigruppide teooriast lähtudes. Skeem: The stakeholder model. Tabelid: Contractual and community stakeholders; Overview of how perceptions of the main stakeholder groups among Estonian business leaders between 1995-2004 have changed

Change in medical plant use in Estonian ethnomedicine: a historical comparison between 1888 and 1994.

Science.gov (United States)

Sõukand, Renata; Kalle, Raivo

2011-05-17

The aim of this paper is to compare the changes in the utilization of species from various hemeroby categories (indicating the degree of sensitivity of the plant to human impact) using historical data concerning the years 1888-1994. The authors digitised 8808 handwritten reports, reflecting local ethnopharmacological knowledge from 8 selected collections from the Estonian Folklore Archives of the Estonian Literary Museum. They were semi-quantitatively analyzed according to the sensitivity to human impact of 540 taxa that could possibly be related to the plant vernacular names given in the reports. Although in different periods of time the number of ethnopharmacologically used plants has changed, the proportion of plants utilized from each group has remained relatively same, consisting on average of: 23% anthropophytes, 42% apophytes, 32% hemeradiaphores and 3% hemerophobes. Comparison of the application of the most used plants revealed considerable changes of plant utilization, in which the varied use of the most popular anthropophytes increased and the applied scope of the most popular hemeradiaphores and hemerophobes decreased almost by twofold in one century. Case studies on seven taxa are presented, of them, use of Allium sativum L., Aesculus hippocastanum L. and Mentha xpiperita L. increased, whereas the use of Hordeum L., Orchidaceae, Paris quadrifolia L. and Briza media L. decreased greatly. This research contributes to the better understanding of the cognitive and human ecological concepts underlying the use of medicinal plants in Estonia. Strong increase in the ethnomedical utilization of plants depending on human influence, and a decrease in the use of taxa that do not prefer human activities indicates that, despite some of the population still have access to natural resources and diverse knowledge of the medical use of plants, the majority relies on a very narrow selection and a rather restricted herbal landscape. Copyright © 2011 Elsevier Ireland Ltd

Implementation of quality assurance and quality control in the Nuclear Analytical Laboratory of the Estonian Radiation Protection Centre

International Nuclear Information System (INIS)

Koeoep, T.; Jakobson, E.

2002-01-01

The Analytical Laboratory of the Estonian Radiation Protection Centre is in the process of implementing the system of Quality Assurance (QA) and Quality Control (QC) in the framework of the IAEA TC Project RER/2/004/ 'QA/QC of Nuclear Analytical Techniques'. The draft Quality Manual with annexes has been prepared accordingly to the ISO 17025 Guide, documents and other printed material delivered on the seminars of the project. The laboratory supply has been supplemented with necessary equipment for guaranteeing of quality. Proficiency testing included in the project has been performed successfully. (author)

Chernobyl is still haunting us. Radionuclides in Estonian mushrooms

International Nuclear Information System (INIS)

Martin, J.; Vilde, R.; Martin, L.; Aaspollu, J.; Tekko, S.

1993-01-01

The disaster that happened at the Chernobyl nuclear power station in 1986 caused a sharp rise in radioactive pollution over an extensive area in the region of the Baltic Sea. To estimate the distribution and the concentration of Cs-137 and Sr-90 in Estonian ecosystems, samples of mushrooms, mosses, lichens and the upper horizons of soil were gathered from 63 test sites during 1991. We were particularly interested in the amounts of radionuclides in mushrooms because these are used as food by people. Dangerously high radionuclide concentrations were found in mushrooms gathered in North-East Estonia. Heightened concentrations were registered here and there all over the territory of Estonia, especially in mushrooms gathered in Central and South-Western Estonia. The Cs-137 content in mushrooms depends on its content in other components of the ecosystems, first and foremost on the concentrations of radiocaesium in mosses and litter, which, therefore, can be used as indicators in prognostication the radioactive pollution of mushrooms in a certain region. As Cs-137 migrates between various ecosystem components, it is necessary to check the radioactivity of the forest products used for food for still a number of years to come. The Sr-90 level was low in all the ecosystem components examined. (author). 3 figs., 10 refs

Kolm Eesti Robinsoni: Daniel Defoe romaan eesti tõlkes / Three Estonian Robinsons: Daniel Defoe’s Novel in Estonian Translation

Directory of Open Access Journals (Sweden)

Ene-Reet Soovik

2012-06-01

Full Text Available The article discusses three Estonian translations of Daniel Defoe’s Robinson Crusoe into Estonian with the focus on the completeness of the translated texts and the characterisation given to these in paratextual information. While there are several translations and versions of the tex t available in E stonian that have either used a mediating language or do not proceed directly from Defoe’s novel, three editions explicitly list Defoe’s English-language Robinson Crusoe as their source text. These are Rudolf Sirge’s translation from 1950 and two editions translated by Valter Rummel that appeared in 1984 (reprinted in 2001 and 2007, respectively. The article sets out to discover the main differences between the three editions and the possible reasons that may have triggered their publication in Estonia at those particular times. In order to approach the issues, a general framework derived from descriptive translation studies is employed with an emphasis on Gideon Toury’s chrestomatic treatment of translation norms. Thus an attempt is made to detect the preliminary translational norms regarding translation policy, particularly the choice of texts to be translated, as well as the matricial norms that concern the fullness of the translated text and are part of operational norms manifested in the translator’s decisions which, in two of the cases at hand, may also have been decisions made by the editor or the censor. Rudolf Sirge’s translation appeared at a time when Estonia had fairly recently been incorporated into the Soviet Union and there was a lack of children’s literature ideologically appreciated by the regime. This may account for the packaging of the book as a work with a strong didactic bent, while its primary audience was taken to be children and young adults for whom the protagonist served as an example of a hard-working and tenacious hero to be emulated by young Soviets. The target text has been considerably shortened as

Individual and work-related risk factors for musculoskeletal pain: a cross-sectional study among Estonian computer users.

Science.gov (United States)

Oha, Kristel; Animägi, Liina; Pääsuke, Mati; Coggon, David; Merisalu, Eda

2014-05-28

Occupational use of computers has increased rapidly over recent decades, and has been linked with various musculoskeletal disorders, which are now the most commonly diagnosed occupational diseases in Estonia. The aim of this study was to assess the prevalence of musculoskeletal pain (MSP) by anatomical region during the past 12 months and to investigate its association with personal characteristics and work-related risk factors among Estonian office workers using computers. In a cross-sectional survey, the questionnaires were sent to the 415 computer users. Data were collected by self-administered questionnaire from 202 computer users at two universities in Estonia. The questionnaire asked about MSP at different anatomical sites, and potential individual and work related risk factors. Associations with risk factors were assessed by logistic regression. Most respondents (77%) reported MSP in at least one anatomical region during the past 12 months. Most prevalent was pain in the neck (51%), followed by low back pain (42%), wrist/hand pain (35%) and shoulder pain (30%). Older age, right-handedness, not currently smoking, emotional exhaustion, belief that musculoskeletal problems are commonly caused by work, and low job security were the statistically significant risk factors for MSP in different anatomical sites. A high prevalence of MSP in the neck, low back, wrist/arm and shoulder was observed among Estonian computer users. Psychosocial risk factors were broadly consistent with those reported from elsewhere. While computer users should be aware of ergonomic techniques that can make their work easier and more comfortable, presenting computer use as a serious health hazard may modify health beliefs in a way that is unhelpful.

Whole-word frequency and inflectional paradigm size facilitate Estonian case-inflected noun processing.

Science.gov (United States)

Lõo, Kaidi; Järvikivi, Juhani; Baayen, R Harald

2018-06-01

Estonian is a morphologically rich Finno-Ugric language with nominal paradigms that have at least 28 different inflected forms but sometimes more than 40. For languages with rich inflection, it has been argued that whole-word frequency, as a diagnostic of whole-word representations, should not be predictive for lexical processing. We report a lexical decision experiment, showing that response latencies decrease both with frequency of the inflected form and its inflectional paradigm size. Inflectional paradigm size was also predictive of semantic categorization, indicating it is a semantic effect, similar to the morphological family size effect. These findings fit well with the evidence for frequency effects of word n-grams in languages with little inflectional morphology, such as English. Apparently, the amount of information on word use in the mental lexicon is substantially larger than was previously thought. Copyright © 2018 Elsevier B.V. All rights reserved.

Conceptual co-presence of motion and emotion in the Estonian terms of personality

Directory of Open Access Journals (Sweden)

Heili Orav

2010-05-01

Full Text Available The purpose of the study was to find out whether the conceptual connection of emotion and motion is holding in the domain of personality traits. In a quantitative study 40 Estonian terms of personality traits were investigated and a conclusion was driven that, indeed, the qualities of emotionality and motion are perceived as co-present characteristics. In further data analysis some visualized measures were applied in order to get further insights into the hidden structure of the data. The self-organizing map (SOM analysis revealed an additional dimension of axiological evaluations present in the semantics and the SOM meta-analysis technique revealed groups of near synonymous words as well as gave overview of the more general structure common in the two data sets. The latter was tentatively explained by the person’s habitual level of activation.DOI: http://dx.doi.org/10.5128/ERYa6.21

History of experimental psychology from an Estonian perspective.

Science.gov (United States)

Allik, Jüri

2007-11-01

A short review of the development of experimental psychology from an Estonian perspective is presented. The first rector after the reopening of the University of Dorpat (Tartu) in 1802, Georg Friedrich Parrot (1767-1852) was interested in optical phenomena which he attempted to explain by introducing the concept of unconscious inferences, anticipating a similar theory proposed by Herman von Helmholtz 20 years later. One of the next rectors, Alfred Wilhelm Volkmann (1800-1878) was regarded by Edwin Boring as one of the founding fathers of the experimental psychology. Georg Wilhelm Struve (1793-1864) played an essential part in solving the problem of personal equations. Arthur Joachim von Oettingen (1836-1920) developed a theory of music harmony, which stimulated his student Wilhelm Friedrich Ostwald (1853-1932) to study colour harmony. Emil Kraepelin (1856-1926), the founder of modern psychiatry, is by far the most important experimental psychologist who has worked in Estonia. His successor Wladimir von Tchisch (1855-1922), another student of Wilhelm Wundt, continued Kraepelin's work in experimental psychology. The lives of Wolfgang Köhler (1887-1967), who was born in Reval (Tallinn), and Oswald Külpe (1862-1915), who graduated from the University of Dorpat, extended the link between the history of experimental psychology and Estonia. Karl Gustav Girgensohn (1875-1925), the founder of the Dorpat School of the psychology of religion, stretched the use of experimental methods to the study of religious experience.

Iseseisvusdeklaratsioonid 1776–1918. The Estonian Declaration of Sovereignty: An Example of the Civilizing Force of Hypocrisy

Directory of Open Access Journals (Sweden)

Hent Kalmo

2012-06-01

Full Text Available Sovereignty has been characterised as a form of “organized hypocrisy”, a system governed by a set of rules that are generally recognised as binding and yet are continually infringed upon by the most powerful actors. This idea can be extended to analyse the role of sovereignty within the Soviet Union. The Soviet Union was nominally governed by a Constitution which endowed the Union Republics with the right of secession, but there was no realistic possibility of exercising this right. One should not rush to conclude, however, that the actual wording of the Soviet Constitution of 1977 was entirely without relevance. As Jon Elster has argued, hypocrisy can have a “civilizing force” when the need to appear impartial and to retain public credibility forces actors to choose a strategy they would not choose otherwise. A good example of this kind of argumentative constraint is offered by the dilemma faced by the Soviet leadership after the mid-1980s, as it became reluctant to use military force to suppress independence movements within the Baltic States while, at the same time, promising to give more weight to the Soviet Constitution and respect the “sovereignty” of the Union Republics. In this setting, the ambiguity of the word “sovereignty” could be played upon by a whole gamut of political movements in order to further their agenda, from local communists eager to expand their autonomy within the Soviet system to those making an explicit bid for the restoration of independence. Significant legal and political changes could be justified as mere conclusions from the constitutionally recognised status of the Union Republics – a strategy which was all the more effective as Moscow struggled to formulate an alternative line of constitutional interpretation that could be used to counter the Baltic claims. This exchange of opinions escalated into a constitutional conflict in November 1988, when the Estonian Supreme Soviet responded to

Comparative analysis of idiom selection and sequencing 5 in Estonian basic school EFL coursebooks

Directory of Open Access Journals (Sweden)

Rita Anita Forssten

2017-05-01

Full Text Available The article investigates the selection and sequencing of the idioms encountered in two locally-produced and international coursebook series currently employed in Estonian basic schools. It is hypothesized that there exists a positive correlation between idioms’ difficulty and coursebooks’ language proficiency level. The hypothesis is tested through a statistical analysis of the idioms found which are categorized in terms of their analysability into three categories where category 1 includes analysable semi-literal idioms, category 2 comprises analysable semi-transparent idioms, and category 3 encompasses non-analysable opaque idioms, and then analysed through an online language corpus (British National Corpus. The results of the study reveal that the coursebook authors under discussion have disregarded idioms’ frequency as a criterion for selection or sequencing, whereas the factor utilized to some extent is the degree of analysability.

Eesti patsient. Haiguse ja haige inimese kujutamise mudel 19. sajandi eesti kultuuris ja kirjasõnas. The Estonian Patient: A Model for the Representation of Illness and the Ill in 19th Century Estonian Culture and Letters

Directory of Open Access Journals (Sweden)

Janek Kraavi

2012-04-01

Full Text Available The portrait of the 18th and 19th century „Estonian patient” sketched in this article is a theoretical model of the ill person, based mainly on literary texts, but with reference to a variety of scientific and popular-scientific material. The point of departure is the classic postcolonial theorist, Frantz Fanon, in whose writings medicine, healing, and discourse on such topics are seen as the functioning of a specific colonial practice. The most notable characteristic of the figure of the Estonian patient is non-communicativeness. Communication is avoided and feared primarily because it has to be directed toward those in higher positions of power, or to institutions that embody power (the apothecary, the hospital. While these traits also characterize the separation between peasants and their rulers more generally, in a situation of illness the exclusion is felt with a double intensity. Sickness casts the peasant in a double bind: when in need of help or healing, contact across the divide between social rank, and – more broadly, between two cultures and ways of understanding the world, becomes unavoidable. In such situations, illness signifies an intensification of the gap in social standing. The ill person, who already stands on a lower rung of the social hierarchy, becomes all the more marginalized. In keeping with these observations, the real reason behind indecisiveness and refusal of medical treatment may well be an effort to avoid or postpone humiliation on the basis of lower social standing. Other contributing factors might include unconscious resistance – or even a conscious model of resistance – in the psyche, which manifests as an avoidance of communication. The content and motivating force for the model is not heroism, but rather a sense of shame. Indeed, behind the context of medical culture lurks ethnic and material isolation. The individual’s economic situation, living conditions, education and – most important – his

Pilk ingliskeelse kirjanduse tõlgetele 18. sajandi lõpust 20. sajandi algusveerandini / A Look at Estonian Translations of English Literature from the late 18th Century to the Early 20th Century

Directory of Open Access Journals (Sweden)

Krista Mits

2012-06-01

Full Text Available The aim of this article is to provide an overview of translations of English literature into Estonian between 1779 and 1917. There is an attempt to analyse the texts by describing them on the basis of, or in their departure from, a text or texts that chronologically and logically precede them. The discussion includes the nature of the transfer and the changes that have been made to the text, either because they existed in the source or mediating text or because of the expectations or requirements in the receptor, i.e. Estonian culture. The translated texts are seen in their historical-cultural context. For the analysis, a corpus of translated texts – religious, fiction, drama and non-fiction (published in a book form was compiled. The general orientation of Estonia until the 1880s was to the German cultural sphere. So the first translations of English literature were made via a mediating language, which was German. English Puritan writers were introduced by the Pietist missionaries with the aim of spreading their teachings in the second half of the 18th century. At about the same time the narrative element was introduced into stories with religious content. Some internationally popular stories, e.g. the Inkle and Yarico story, later robinsonades, stories of slavery and plant at ion life, as well as Amer ican Indian st or ies wer e also t r anslat ed fr om Ger man. However, until  1875  ver  y  few  translations  of  English  literature  into  E stonian were  published.  The  last quarter of the 19th century saw an explosion in literary production: there was a substantial increase  both  in  the  number  of  translations  of  English  literature  into  E stonian  as  well  as diversification of genres. This continued into the first decade of the 20th  centur y,  when  the sociopolitical situation in Estonia changed. In addition, books came to be translated directly from  English,  although  many  translations �

Biological dosimetric studies in the Chernobyl radiation accident, on populations living in the contaminated areas (Gomel regions) and in Estonian clean-up workers, using FISH technique

International Nuclear Information System (INIS)

Darroudi, F.; Natarajan, A.T.

1996-01-01

In order to perform retrospective estimations of radiation doses seven years after the nuclear accident in Chernobyl, the frequencies of chromosomal aberrations in the peripheral blood lymphocytes of individuals living in contaminated areas around Chernobyl and the Estonian clean-up workers were determined. The first study group composed of 45 individuals living in four areas (i.e. Rechitsa, Komsomolski, Choiniki and Zaspa) in the vicinity (80-125 km) of Chernobyl and 20 individuals living in Minsk (control group - 340 km from Chernobyl). The second study group (Estonian clean-up workers) composed of 26 individuals involved in cleaning up the Chernobyl for a different period of time (up to 7 months) and a matched control group consisting of 9 probands. Unstable aberrations (dicentrics and rings) were scored in Giemsa stained preparations and stable aberrations (translocations) were analyzed using chromosome specific DNA libraries and fluorescence in situ hybridization (FISH) technique. For both study groups the estimated average dose is between 0,1-0,4 Gy. Among the people living in the contaminated areas in the vicinity of Chernobyl, a higher frequency of numerical aberrations (i.e. trisomy, hyper diploidy) was evident

Nooreestlased arvustuses ja arvustajatena: lugejakontseptsioonist 20. sajandi alguse kriitikas. The Young Estonians as Critics and in the Eyes of Critics: On the Concept of the Reader in Early 20th Century Estonia

Directory of Open Access Journals (Sweden)

Marju Mikkel

2012-04-01

Full Text Available Until recently, the treatment of Estonian literature from the beginning of the 20th century has been influenced by the literary and cultural activities and programmatic articles of the Young Estonia movement. Current research on Young Estonia has addressed their more everyday realm of activity, which has heretofore received less attention: the Young Estonians as readers of the new works of their literary contemporaries and their practical criticism in reviews, particularly in daily newspapers. This article uses a receptionhistorical approach to analyze a large body of source material: the Young Estonians voluminous critical oeuvre in the period 1905–1915. The Young Estonians to be examined are all members of the core group of the movement: Gustav Suits, Bernhard Linde, Aino Kallas, Johannes Aavik, Villem Grünthal-Ridala, Jaan Oks, August Alle, and Johannes Semper. Within the larger framework of collective horizons of expectation, the focus of the study is the critics` concept of the reader. In addition, I will briefly discuss the dynamics of how such conceptions change. Research results indicate that in critical reviews from the time of Young Estonia, the topic of the reader was addressed from different standpoints depending on the addressee. Texts directed rhetorically toward a broad readership are characterized by the pursuit of objectivity and generalizations. When the concept of the reader is critic-centered, the text emphasizes subjective judgments, experience, and emotion. When focusing on the author and the text, the reviewer describes the influence on the reader, the cause of which is either the literary work directly or the author’s genius. In the case of polemic on the subject of reading, found mainly in responses written to reviews, the writer interprets another reader (or other readers` reading, opposing it to his or her own. When we follow the way the readers of Young Estonia and the Young Estonians themselves handle the

Chemical composition of anthropogenic particles on needles collected close to the Estonian oil-shale power plants

International Nuclear Information System (INIS)

Meinander, O.

1995-01-01

Within the countries surrounding the Baltic Sea, north-eastern Estonia is among the most polluted areas. Emissions from the oil-shale power plants produce air pollution problems both locally and on a larger scale. In the atmosphere, pollutants mix and convert. Consequently, the particles deposited due to the use of oil-shale can have various chemical compositions. From the point of view of air chemistry, ecological effects and air pollution modelling, knowledge of the chemical composition of the deposited particles can be of great value. The aim of this work was to study the chemical composition of single anthropogenic particles occurring on needle surfaces in north-eastern Estonia and Southern Finland close to the Estonian oil-shale power plants. For the purpose, scanning electron microscopical microanalysis was used

Bernhard Linde. Noor-Eesti vooriülem. Bernhard Linde. Leader of the Young Estonian Pack

Directory of Open Access Journals (Sweden)

Jaanus Kulli

2012-04-01

Full Text Available Bernhard Linde (1886–1954 was a recognized and prolific Estonian theatre critic of the first quarter of the 20th century, who mediated and propagated western as well as eastern European theatrical innovations. In addition, he was active as a literary and art critic, publisher, and proponent of libraries, to a modest extent he was a prose writer and poet. Unquestionably, however, Bernhard Linde’s most prominent role was as one of the founding members of the literary movement Young Estonia. He was the group’s first general manager; later on, he was the secretary of the Estonian Writers’ Association Young Estonia, and the chairman of the board of the Young Estonia Publishing House. Linde’s formal education culminated in graduation from Tartu University as a Slavic philologist; he was the only member of the Young Estonia group to demonstrate serious and sustained interest toward Slavic cultures and peoples. Linde was a contradictory figure, evoking a range of responses from his contemporaries: on the one hand, there was the unbelievably broad range of his participation in cultural life, his organizing skills and business instincts in directing publishing houses; on the other hand, a superficiality in his writings, his often rash and subjective style as a critic, and his financial intrigues. If one adds in Linde’s stubbornness, egocentrism, and intense spirit of protest, which often led to lawsuits, the outcome is the portrait of an extremely complicated, fascinating, and passionate man—both in his creative work and his personal life Linde guaranteed a place for himself in literary history through a small catch of texts: a few foundational essays (for example, on August Kitzberg, a translation of Balzac’s Le père Goriot, the essay collection Omad ja võõrad (Own and Foreign and a travel book focusing on the literature and theatre of eastern Europe (Loova Kesk-Euroopa Poole (Toward A Creative Central Europe. The prominent public

Technical assistance for EBRD-PMU, Estonia

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-01

The EBRD Energy Sector Emergency Loan to Estonia has resulted in numerous benefits for the Estonian Energy Sector and the Estonian Society and the locals as well as the end users have developed themselves tremendously during the project. The substantial economic, environmental and energy saving effects of the loan project have been: Energy savings and improved energy efficiency in the electricity grid, the district heating networks, the district heating consumer installations, the energy production plants in terms of rehabilitated or converted boilers and burners, industrial consumer installations. The energy efficiency improvements have resulted in energy savings between 5% and 30%; Conversion of boilers from expensive imported heavy fuel oil to indigenous fuels such as peat and wood. The results are higher supply security, improved boiler efficiency, reduced emissions and reduced operation and maintenance costs; Rehabilitated district heating networks resulted in reduced heat and water losses, improved operation of installations and reduced maintenance costs; Rehabilitated electricity grids with fewer break-downs, reduced maintenance costs and improved energy efficiency as results; Improved operation of the larger energy utilities resulting in lower operational costs, improved dispatch of the energy systems and speedier actions in case of break-downs. The economic indicators, pay-back time and Internal Rate of Return show that a large number of the projects have had a substantial impact on the Estonian economy and that the projects have been sound investments. The recommendations for the local completion of the work in Estonia are: The Juri boiler plant should be carefully attended to by the PMU and the Estonian authorities. (Abstract Truncated)

Euroopa-ihalusest taasiseseisvusperioodi autobiograafiates / European Identifications in Post-Soviet Estonian Life Writing

Directory of Open Access Journals (Sweden)

Leena Kurvet-Käosaar

2016-12-01

Full Text Available Teesid: Artikkel käsitleb Euroopat kui identiteedi ja minaduse sõlmpunkti ja enesevahenduse mõõdet kolmes omaelulookirjutuslikus teoses, mille autoritel on väljapaistev positsioon eesti (kirjanduskultuuris: Jaan Krossi „Kallid kaasteelised“ (2003a, 2008, Jaan Kaplinski „Isale“ (2003 ja Tõnu Õnnepalu „Flandria päevik“ (2007. Artikkel keskendub sellele, kuidas küsimused suhestumise trajektooridest Euroopa mäluruumiga haakuvad Krossi, Kaplinski ja Õnnepalu teostes esiletuleva enesemääratlusliku raamiga, neist lähtuvate vastastikuse kõnetuse võimaluste ja oma aegruumi tunnetuse pidepunktidega. Kuigi tegemist on eesti keeles ilmunud ning eesti kultuuriruumi lugejale suunatud teostega, seostuvad neis väljajoonistuvad enesemääratluse teljed viimastel aastakümnetel hoogustunud laiemate aruteludega ühtse Euroopa mäluraami ning identiteedi võimalikkusest ja selle toimimise tingimustest.   In recent years, the question of the possibility of a shared frame of memory and identity in Europe, its desired manifestations and practices for attaining it as well as its obstacles and limitations to it have gained prominence in scholarly debates in a number of disciplines. In terms of the division between the East and West of Europe, these discussions take as their starting point the collapse of the Soviet system in 1989 as well as the European Union enlargement in 2004. Far from uniform, the exceedingly complex and contrasting ranges of arguments have put forward a varied palette of perspectives and suggestions about possible and desirable implications of Europe in different socio-political and cultural configurations. Taking these debates as my starting point, the current article offers an analysis of three life writing works by contemporary Estonian authors and intellectuals, Kallid kaasteelised (Dear Fellow Travellers, 2003, 2008 by Jaan Kross, Isale (To My Father, 2003 by Jaan Kaplinski and Flandria päevik (The Flemish Diary

Promoting biogas production and using it as transport fuel in the Helsinki region; Suunnitelma liikennebiokaasun tuotannon ja kaeytoen edistaemiseksi Helsingin seudulla

Energy Technology Data Exchange (ETDEWEB)

Rasi, S.; Havukainen, J.; Uusitalo, V.; Andersson, R.; Manninen, K.; Aro-Heinilae, E.; Rintala, J.

2012-11-01

The main objective of the project was to promote biogas production and its use as transport fuel. The aims in the four Finnish and two Estonian case areas were to reduce the amount and improve the sustainable use of waste and sludge, to promote biogas production, to start biogas use as transport fuel and to provide tools for implementing the aims. The total biomethane potential in the Helsinki region corresponds to approximately 450 GWh/a. The most potential user for biomethane is public transport. The total amount of biomethane would suffice for 80% of the busses operating in the Helsinki region. Using biogas as a transport fuel instead of energy production in the Helsinki region would result in emission reductions (13 000 t{sub CO2,eq}/a). However if the fuel replacing biogas in energy production would be renewable, the emission reductions would be significantly greater. The economical assessment indicates that the production of biogas is economically feasible if all the produced gas can be sold. Biogas produced near the natural gas grid can also be transported to the Helsinki region where there are better possibilities to find uses for it. In this way, for example, gas that is produced in Kymenlaakso but is not consumed there can be transported via the natural gas grid, assuming that the production plant is reasonably close to the grid. (orig.)

The Problems of Estonian R&D and Innovation Strategy and the Demand-Side Innovation Policies

Directory of Open Access Journals (Sweden)

Tõnu Roolaht

2012-12-01

Full Text Available The second larger Estonian R&D and Innovation Strategy ‘Knowledge-based Estonia 2007-2013’ is aimed at continuing the advancement of research and development efforts towards an innovative knowledge-based society and economic system in Estonia. Fostering of knowledge-based high-tech industries is seen as paramount for retaining country’s competitive advantage. However, the mid-term evaluations indicate that several goals of the strategy might not be achievable by 2013. In fact, the policy measures have been much more successful in developing scientific research, as indicated by increased international publication, number of patents, and number of researchers and engineers. The advances in development of high-tech products and services through innovations are noticeable but less prominent. The purpose of this study is to suggest the role for demand-side innovation policies in helping to advance commercial development and innovation

Chemistry of the Estonian oil-shale kukersite

Energy Technology Data Exchange (ETDEWEB)

Kogerman, P N

1931-01-01

Estonian oil shale is one of the oldest and richest oil shales in the world. The deposits occur in the Middle-Ordovician strata having a total thickness of 2.2 meters. The ultimate composition of the kerogen varied within the following limits: carbon 76.5 to 76.7 percent, hydrogen 9.1 to 9.2 percent, nitrogen 0.2 to 0.4 percent, sulfur 1.6 to 2.2 percent, chlorine 0.5 to 0.7 percent, and oxygen (by difference) 11.2 to 12.2 percent. The composition of kukersite kerogen corresponds nearly to the empirical formula (C/sub 8/H/sub 11/O)n. One of the most significant differences between kukersite, coal, and lignite is the amount of alkali-soluble substances present. Kukersite has almost no humic acids. Samples of kukersite were brominated and chlorinated. The halogenated shales showed a solubility in absolute alcohol of 26 percent compared to only 0.31 percent for untreated shale. Enriched shale (4.5 percent ash) did not react with chlorine as much as did raw shale. Apparently the mineral matter acted catalytically during chlorination. The amount of soluble extract obtained by solvent treatment of kukersite ranged from 0.22 percent with chloroform to 2.20 percent with tetrachloroethane. Heat was the most effective agent for the depolymerization of kukersite kerogen. The percentage loss of weight due to drying in air was much less than in the presence of carbon dioxide. The results indicated that on drying in air, the powdered shale loses water and a volatile substance, probably the oxides of carbon, up to 80/sup 0/C. Carbon dioxide was also found to be present in the gases eliminated at the temperature of initial decomposition. Pulverized shale, heated for 6 hours at 220/sup 0/C, lost 2.6 percent of its weight; its solubility in carbon disulfide was 2.11 percent. Kukersite kerogen was formed from compounds that were resistent to bacteriological decomposition, such as waxes and resins, plus decomposition products of proteins, cellulose, and putrefaction products of

Borrowing brainpower - sharing insecurities

DEFF Research Database (Denmark)

Wegener, Charlotte; Meier, Ninna; Ingerslev, Karen

2016-01-01

Academic writing is a vital, yet complex skill that must be developed within a doctoral training process. In addition, becoming an academic researcher is a journey of changing sense of self and identity. Through analysis of a group session, we show how the feedback of peers addresses questions...... of structure and writing style along with wider issues of researcher identity. Thus, peer learning is demonstrated as a process of simultaneously building a text and an identity as scholarly researcher. The paper advocates ‘borrowing brainpower’ from peers in order to write better texts and, at the same time......, ‘share insecurities’ during the development of the researcher identity. Based on a distributed notion of peer learning and identity, we point to the need for further research into the everyday activities of doctoral writing groups in order to understand the dynamic relationship between production of text...

Eesti Rahva Muuseumi strateegiad ja praktikad rahvaga suhtlemisel muuseumi algusaastatel / Estonian National Museum: Public communication strategies and practices in the initial years

Directory of Open Access Journals (Sweden)

Piret Õunapuu

2012-01-01

Full Text Available Until recently the museum phenomenon as the valuator of the indigenous culture in the context of the awakening national consciousness has received little attention. The evolution of the idea of the Estonian National Museum (ENM and its realization reflects the story of the Estonian people maturing into a nation. The museum was founded by a few dedicated persons and it took a long time before the general public recognised it as the museum for the Estonian people. The main purpose of this research is to ascertain how relations developed between the public and the museum in its initial years and what were the museum strategies in declaring its objectives. After the official foundation of the ENM in 1909 the museum narrative can be divided into two main parts. First, work inside the museum, the compilation and arrangement of collections. This was, above all, the work of the collection committee and organizing heritage collection trips. Collections constitute the basis of a museum – therefore the primary and most important task of the established museum was the collection of heritage items. The collections were started immediately after the foundation of the museum; within the first ten years approximately 20,000 items were collected, approximately two thirds of the items in the years 1911–1913. The phenomenon that a museum where people worked mainly without a salary for the benefit of their homeland, with the set aim to empty the whole of Estonia of heritage items parish by parish and succeeded in engaging dozens and dozens of people for this work, is probably exceptional in world history. As a result, the museum acquired not only voluminous but also valuable item collections, which reached the museum before the devastating First World War. The timing was favourable. There were enough old artefacts left, although most collectors complained in their diaries that there was nothing interesting to be found any more. However, the majority of the

Client-centeredness of Finnish and Estonian nursing students and the support from nursing education to develop it. Students' self-evaluation.

Science.gov (United States)

Kalam-Salminen, Ly; Valkonen, Marjo-Riitta; Aro, Ilme; Routasalo, Pirkko

2013-10-01

The purpose of this comparative study is to describe the differences between Finnish and Estonian students evaluations about their client-centeredness and educational support they received to develop it. Client-centeredness has many positive effects on the quality and effectiveness of care. However, some deficiencies have been identified in the client-centeredness of nursing staff. Research on the subject has been limited, and we lack knowledge of graduating students' competence in client-centeredness and the support of their education to develop it. The sample consisted of 390 undergraduate nursing students, 195 from Finland and 195 from Estonia. The data were collected in 2009 using the structured five-point scale questionnaire. The questionnaire was designed to measure students' client-centeredness and the educational support they received from nursing education. The data were analyzed by the PASW Statistics 18-programme using descriptive statistics, Kolmogorov-Smirnov test and Mann-Whitney U-test. Predominantly, students in both countries evaluated their level of client-centeredness high. The Estonian students generally evaluated their client-centeredness higher compared to the Finnish students. The same applied to support provided by nursing education. The greatest differences were related to education and particularly theoretical teaching. In Estonia, students' client-centeredness manifested itself more in politeness and willingness to serve clients, whereas respecting the clients' values was emphasized in Finland. Students' requisites, referred here as knowledge, skills and abilities to implement client-centered nursing, for client-centeredness had deficiencies, and the support from education was also the weakest regarding these aspects. In future, education on development of nursing activities, acquisition of knowledge and services provided by health care as well as legislation should be enhanced, since these areas proved the most difficult for the students

Short rotation willow coppice for renewable energy and improved environment. Proceedings of a joint Swedish - Estonian seminar on energy forestry and vegetation filters

International Nuclear Information System (INIS)

Perttu, K.; Koppel, A.

1996-01-01

The overall aim of the present seminar was to present and discuss results from the joint Swedish - Estonian energy forestry research activities during the period of 1993-1995 and to publish the papers in a technical report. The results is a publication, presenting interesting methods and results, and is meant partly to serve as the final report of the joint efforts during the period mentioned, partly to be used for future planning of new projects and for application of funding for a continued cooperation. Separate abstracts have been prepared for all of the 17 papers in the report

Five-class height-weight mean and SD system applying Estonian reference values of height-weight mean and SD for systematization of seventeen-year-old conscripts' anthropometric data.

Science.gov (United States)

Lintsi, Mart; Kaarma, Helje; Aunapuu, Marina; Arend, Andres

2007-03-01

A study of 739 conscripts aged 17 years from the town of Tartu and from the Tartu county was performed. Height, weight, 33 anthropometric measurements and 12 skinfolds were measured. The data were classified into five height-weight mean and SD-classes applying the Estonian reference values for this age and sex (Grünberg et al. 1998). There were 3 classes with conformity between height and weight class: 1--small (small height and small weight), 2--medium (medium height and medium weight), 3--large (large height and large weight), 4--weight class dominating (pyknomorphic) and 5--height class dominating (leptomorphic). It was found, that in classes 1, 2 and 3 the height and weight increase was in accordance with the increase in all heights, breadths and depths, circumferences, skinfolds, body fat, muscle and bone mass. In class 4 circumferences, skinfolds, body fat and muscle mass were bigger. In class 5 all heights and the relative bone mass were bigger. The present investigation confirms the assumption that the five height-weight mean and SD five-class system applying the Estonian reference values for classifying the anthropometric variables is suitable for seventeen-year-old conscripts. As well the border values of 5%, 50% and 95% for every anthropometrical variable in the five-classes were calculated, which may be helpful for practical classifying.

From waste to traffic fuel -projects. Final report

Energy Technology Data Exchange (ETDEWEB)

Rasi, S; Lehtonen, E; Aro-Heinilae, E [and others

2012-11-01

The main objective of the project was to promote biogas production and its use as traffic fuel. The aims in the four Finnish and two Estonian case regions were to reduce the amount and improve the sustainable use of waste and sludge, to promote biogas production, to start biogas use as traffic fuel and to provide tools for implementing the aims. The results of this study show that achieving the food waste prevention target will decrease greenhouse gas emissions by 415 000 CO{sub 2}-eq tons and result in monetary savings for the waste generators amounting to almost 300 euro/ capita on average in all case regions in 2020. The results show that waste prevention should be the first priority in waste management and the use of waste materials as feedstock for energy production the second priority. In total 3 TWh energy could be produced from available biomass in the studied case regions. This corresponds to the fuel consumption of about 300 000 passenger cars. When a Geographical Information System (GIS) was used to identify suitable biogas plant site locations with particular respect to the spatial distribution of available biomass, it was found that a total of 50 biogas plants with capacity varying from 2.1 to 14.5 MW could be built in the case regions. This corresponds to 2.2 TWh energy and covers from 5 to 40% of the passenger car fuel consumption in these regions. Using all produced biogas (2.2 TWh energy) for vehicle fuel GHG emissions would lead to a 450 000 t CO{sub 2}-eq reduction. The same effect on emissions would be gained if more than 100 000 passenger cars were to be taken off the roads. On average, the energy consumed by biogas plants represents approximately 20% of the produced energy. The results also show that biomethane production from waste materials is profitable. In some cases the biomethane production costs can be covered with the gained gate fees. The cost of biomethane production from agricultural materials is less than 96 euro/MWh{sub th

1988. aasta suveräänsusdeklaratsioon: silmakirjalikkuse tsiviliseeriv mõju / The Estonian Declaration of Sovereignty: An example of the civilising force of hypocrisy

Directory of Open Access Journals (Sweden)

Hent-Raul Kalmo

2011-01-01

Full Text Available Sovereignty has been characterised as a form of “organised hypocrisy”, a system governed by a set of rules that are generally recognised as binding and yet continually infringed by the most powerful actors. This idea can be extended to analyse the role of sovereignty within the Soviet Union. The latter was also nominally governed by a constitution which endowed the Union Republics with the right of secession, but there was no realistic possibility of exercising this right. One should not rush to conclude, however, that the letter of the Soviet Constitution of 1977 was entirely without relevance. As Jon Elster has argued, hypocrisy can be a “civilising force” when the need to appear impartial and retain public credibility forces actors to choose a strategy they would not have chosen otherwise. A good example of this kind of argumentative constraint is offered by the dilemma faced by the Soviet leadership after the mid-1980s, as it became reluctant to use military force to suppress independence movements within the Baltic States while, at the same time, promising to give more weight to the Soviet Constitution and respect the “sovereignty” of the Union Republics. In this setting, the ambiguity of the word “sovereignty” could be used by a whole gamut of political movements in order to further their agenda, from local communists eager to expand their autonomy within the Soviet system to those making an explicit bid for the restoration of independence. Significant legal and political changes could be justified as mere conclusions from the constitutionally recognised status of the Union Republics — a strategy which was all the more effective as Moscow struggled to formulate an alternative line of constitutional interpretation that could be used to counter the Baltic claims. This exchange of opinions escalated into a constitutional conflict in November 1988 when the Estonian Supreme Soviet responded to proposed amendments to the Soviet

Using micro-contexts to describe a writing process in Estonian as a second language across proficiency levels

Directory of Open Access Journals (Sweden)

Olga Pastuhhova

2015-04-01

Full Text Available This paper aims to describe the writing process of native Russian‑speaking students in Estonian as a second language. 34 participants were given the assignment of writing a text in the L2. The written texts were then rated as being at levels from A2 to C1 according to the Common European Framework of Reference for Languages (CEFR. The data were collected by computer keystroke logging and analysed based on the concept of a ‘micro-context’. Micro-contexts were analysed according to their frequency and duration and were compared across proficiency levels. The results show that writing in the L2 is not a smooth process. The longest transitions in micro-contexts reveal that the most cognitive effort is made between paragraphs and sentences and when deletions are involved. The growing number of consecutive deletions demonstrates that even with developing proficiency, the linear production text is subject to constant revision, correction and modification.

Experiences of a long-term randomized controlled prevention trial in a maiden environment: Estonian Postmenopausal Hormone Therapy trial

Directory of Open Access Journals (Sweden)

Rahu Mati

2008-08-01

Full Text Available Abstract Background Preventive drugs require long-term trials to show their effectiveness or harms and often a lot of changes occur during post-marketing studies. The purpose of this article is to describe the research process in a long-term randomized controlled trial and discuss the impact and consequences of changes in the research environment. Methods The Estonian Postmenopausal Hormone Therapy trial (EPHT, originally planned to continue for five years, was planned in co-operation with the Women's International Study of Long-Duration Oestrogen after Menopause (WISDOM in the UK. In addition to health outcomes, EPHT was specifically designed to study the impact of postmenopausal hormone therapy (HT on health services utilization. Results After EPHT recruited in 1999–2001 the Women's Health Initiative (WHI in the USA decided to stop the estrogen-progestin trial after a mean of 5.2 years in July 2002 because of increased risk of breast cancer and later in 2004 the estrogen-only trial because HT increased the risk of stroke, decreased the risk of hip fracture, and did not affect coronary heart disease incidence. WISDOM was halted in autumn 2002. These decisions had a major influence on EPHT. Conclusion Changes in Estonian society challenged EPHT to find a balance between the needs of achieving responses to the trial aims with a limited budget and simultaneously maintaining the safety of trial participants. Flexibility was the main key for success. Rapid changes are not limited only to transiting societies but are true also in developed countries and the risk must be included in planning all long-term trials. The role of ethical and data monitoring committees in situations with emerging new data from other studies needs specification. Longer funding for preventive trials and more flexibility in budgeting are mandatory. Who should prove the effectiveness of an (old drug for a new preventive indication? In preventive drug trials companies may

Developments of the Estonian intellectual property system to meet the challenges of the knowledge-based economy : [doktoritöö] / Aleksei Kelli ; Tartu Ülikool ; juhendaja: Heiki Pisuke

Index Scriptorium Estoniae

Kelli, Aleksei, 1977-

2009-01-01

Sisaldab artikleid: Intellectual property in an innovation-based economy // Review of Central and East European Law (2008) nr. 2, lk. 223-238 (kaasautor Heiki Pisuke) ; Some issues of the Estonian innovation and intellectual property policy // Juridica International. XV. Tartu, 2008, lk. 104-114 ; Improvement of the intellectual property system as a measure to enhance innovation // Juridica International. XVI. Tartu, 2009, lk. 114-125 ; Some issues regarding entrepreneurial universities and intellectual property // Juridica International. XII. Tartu, 2007, lk. 161-172 (kaasautor Heiki Pisuke). - Tutvustus // Tartu Ülikooli doktorite promoveerimine 2010. Tartu, 2010, lk. 5-6

Supervision, mentorship and peer networks: how Estonian early career researchers get (or fail to get support

Directory of Open Access Journals (Sweden)

Jaana Eigi

2018-03-01

Full Text Available The paper analyses issues related to supervision and support of early career researchers in Estonian academia. We use nine focus groups interviews conducted in 2015 with representatives of social sciences in order to identify early career researchers’ needs with respect to support, frustrations they may experience, and resources they may have for addressing them. Our crucial contribution is the identification of wider support networks of peers and colleagues that may compensate, partially or even fully, for failures of official supervision. On the basis of our analysis we argue that support for early career researchers should take into account the resources they already possess but also recognise the importance of wider academic culture, including funding and employment patterns, and the roles of supervisors and senior researchers in ensuring successful functioning of support networks. Through analysing the conditions for the development of early career researchers – producers of knowledge – our paper contributes to social epistemology understood as analysis of specific forms of social organisation of knowledge production.

Personality traits and eating habits in a large sample of Estonians.

Science.gov (United States)

Mõttus, René; Realo, Anu; Allik, Jüri; Deary, Ian J; Esko, Tõnu; Metspalu, Andres

2012-11-01

Diet has health consequences, which makes knowing the psychological correlates of dietary habits important. Associations between dietary habits and personality traits were examined in a large sample of Estonians (N = 1,691) aged between 18 and 89 years. Dietary habits were measured using 11 items, which grouped into two factors reflecting (a) health aware and (b) traditional dietary patterns. The health aware diet factor was defined by eating more cereal and dairy products, fish, vegetables and fruits. The traditional diet factor was defined by eating more potatoes, meat and meat products, and bread. Personality was assessed by participants themselves and by people who knew them well. The questionnaire used was the NEO Personality Inventory-3, which measures the Five-Factor Model personality broad traits of Neuroticism, Extraversion, Openness, Agreeableness, and Conscientiousness, along with six facets for each trait. Gender, age and educational level were controlled for. Higher scores on the health aware diet factor were associated with lower Neuroticism, and higher Extraversion, Openness and Conscientiousness (effect sizes were modest: r = .11 to 0.17 in self-ratings, and r = .08 to 0.11 in informant-ratings, ps < 0.01 or lower). Higher scores on the traditional diet factor were related to lower levels of Openness (r = -0.14 and -0.13, p < .001, self- and informant-ratings, respectively). Endorsement of healthy and avoidance of traditional dietary items are associated with people's personality trait levels, especially higher Openness. The results may inform dietary interventions with respect to possible barriers to diet change.

Organizational culture based on the example of an Estonian hospital.

Science.gov (United States)

Saame, Iisi; Reino, Anne; Vadi, Maaja

2011-01-01

The concept of organisational culture (also referred to later as OC) is one of the approaches in modern organisational analysis exploring the values, attitudes and beliefs behind human behaviour in the workplace. OC as a social phenomenon is considered to be important for the sustainability of every organisation. In the service sector, OC may affect the nature and quality of the services provided. The aim of this paper is twofold: on the one hand, to highlight the patterns of OC in a hospital; and, on the other hand, to outline relationships between OC and patient satisfaction. The study was conducted in Tartu University Hospital, one of the most influential health care organisations in Estonia. This paper has original value by presenting an insight into organisational culture in the Estonian health care sector, and the findings of the study will expand knowledge of OC in the health care sector in general. The OC instrument applied in a quantitative cross-sectional study was earlier developed according to the Competing Values Framework (CVF). Data from 456 medical and non-medical professionals were analysed using non-parametric tests of descriptive statistics. A factor analysis was performed to assess the instrument's compatibility for analysing the OC pattern in the health care sector. The dominant culture type in all the groups investigated was the Internal Processes type, mainly followed by the Rational Goal type, while different cultural patterns were observed in professional groups. The factor analysis yielded a three-subscale solution. Clinics with high patient satisfaction did not score more than clinics with low patient satisfaction in terms of the Human Relations type. In future studies a random sample design and a multidisciplinary approach to OC research should be followed in order to further explore OC patterns in hospitals and their consequences for different aspects of hospital performance.

Power without manpower: Forecasting labour demand for Estonian energy sector

International Nuclear Information System (INIS)

Meriküll, Jaanika; Eamets, Raul; Humal, Katrin; Espenberg, Kerly

2012-01-01

As energy demand and prices continue to grow, oil shale might help mitigate the energy crisis—it can widely be found all over the world but so far has not been widely used. Estonia is unique in the world for producing a large majority of energy out of oil shale and has been set as an example in numerous papers covering oil shale deposits, technology etc. This paper is the first to analyse oil shale energy related workforce and provides scenario forecasts of the labour demand for the Estonian energy sector in 2010–2020. The contribution of the paper is twofold. First, the paper provides a valuable insight into oil shale energy related workforce, enabling to take into consideration the educational needs in countries where oil shale industry might be set up. Second, methodology-wise, the paper relates labour demand and supply to different scenarios of energy production capacities. The results illustrate problems related to aging of the workforce in energy production. If the existing trends continue in educational attainment in Estonia, there will be a serious shortage of high-skilled engineering and manufacturing specialists. Our method provides a simple yet reliable enough way to check for such problems early enough. - Highlights: ► This paper analyses oil shale energy related workforce and provides scenario forecasts. ► This is the first study to investigate the workforce related to oil shale energy production. ► The main workforce-related problem in the sector is ageing of the workforce. ► Workers immigrating to the sector during the Soviet times are at the retirement age. ► There will be a serious shortage of engineers for energy sector in the near future.

Characteristic fly-ash particles from oil-shale combustion found in lake sediments

International Nuclear Information System (INIS)

Alliksaar, T.; Hoerstedt, P.; Renberg, I.

1998-01-01

Fly-ash particles accumulate in sediments and can be used to assess spatial distribution and temporal trends of atmospheric deposition of pollutants derived from high temperature combustion of fossil fuels. Previous work has concerned fly-ash derived from oil and coal. Oil-shale is the main fossil fuel used in Estonia and a major source of atmospheric pollution in the Baltic states. To assess if oil-shale power plants produce specific fly-ash particles scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX) were used to compare fly-ash particles from oil-shale combustion with particles from oil and coal combustion. Two types were analysed, large black (10-30μm) and small glassy (< 5 μm) spheroidal particles. Although article morphology to some extent is indicative of the fuel burnt, morphological characters are not sufficient to differentiate between particles of different origin. However, the results indicate that with EDX analysis the fly-ash from oil-shale can be distinguished form oil and coal derived particles in environmental samples. Concentrations of large black and small glassy spheroidal fly-ash particles in a sediment core from an Estonian lake showed similar trends to oil-shale combustion statistics from Estonian power plants. 27 refs., 6 figs., 2 tabs

Omaeluloolisus eesti teatris: Merle Karusoo lavastustest. Life Narratives and Estonian Theatre: The Productions of Merle Karusoo

Directory of Open Access Journals (Sweden)

Piret Kruuspere

2012-04-01

Full Text Available Any consideration of Estonian theatre from the point of view of biographical theatre needs to include the work of playwright and director Merle Karusoo. Productions based on various life narratives (diaries, letters, biographical interviews form the core of her work that can be defined as biographical or memory theatre. Her work has also been viewed within the context of community theatre or political theatre; Karusoo has herself referred to her work as sociological theatre. Life narratives have functioned in Karusoo’s productions as the basis for restoring oppressed or denied collective discourses of memory. Her productions emerged within the framework of the more general process of restoration of historical heritage and the rehabilitation of collective memory at the end of the 1980s and the beginning of the 1990s. Life story can be viewed as the essence of Merle Karusoo’s theatre. The personal in the life story in the production activates the emotional memory of the audience; for older generations such theatre facilitates a legitimisation of remembering one’s life story in entirety, and for younger generations it functions as a vehicle of collective, historical and national memory. The current article outlines the main stages of Karusoo’s biographical theatre, highlights major productions of each stage and provides an overview of their reception. Karusoo’s theatre dates back to 1980s. Productions based on life stories of the generations born in 1950s and 1960s, Meie elulood (Our Biographies and Kui ruumid on täis ... (Full Rooms both in 1982, mediated fragments of life stories of 16 drama students, focusing on the processes of self-conception and -reflection of young persons. In the context of the Soviet regime that exerted firm ideological control over the private lives of its citizens, Karusoo’s productions struck an especially powerful and unusual chord. Karusoo’s biographical theatre has gathered momentum and assumed a more

Dinamika i perspektivy torgovo-jekonomicheskogo i investicionnogo sotrudnichestva Rossii i Jestonii v uslovijah krizisa

Directory of Open Access Journals (Sweden)

Nevskaya A.

2015-05-01

Full Text Available The article deals with the development in Russian-Estonian relations during the crises of 2007 and 2014, taking into consideration the balance between political and economic factors in the decision-making by Estonian government. A number of special aspects, trends and problems in trade and investment ties are detected. The aim of the study is to uncover key motivation behind the actions of both Russia and Estonia, to identify the drivers for economic and political development in the region, and to work out recommendations to adjust them. The questions put forward by the authors of this article could not be more topical at the time, when Russian economic situation is obviously getting worse and capital flight (to the neighboring EU Member States is likely to increase. The method of the study is comparative analysis of the impact on economic ties made by Russian-Estonian crisis of 2007 and the current international tension around Ukraine. The regional fossil fuel market and the possibilities of Gazprom involvement in its development are also analyzed. It is concluded that political motives are still important for Estonian decisionmaking, though they are balanced out by measures of business support (despite some of these measures being taken by the EU bodies. The role of political factor for the Russian side is increasing. It is acknowledged that there is a growing number of missed economic opportunities in the Russian Northwest.

National Science Bowl | NREL

Science.gov (United States)

Science Bowl National Science Bowl The Department of Energy's Office of Science sponsors the National Science Bowl competition. This fun, fast-paced academic tournament tests the brainpower of middle and high school student teams on science and math topics. The National Science Bowl provides an

Power engineers in Paernu

International Nuclear Information System (INIS)

Veski, Rein

1999-01-01

There was a meeting of the Estonian Power and Heat Association in Paernu summarizing the Association's activities in 1998. Only local fuels such as peat and wood chips (70 %) and oil shale (30 %) are used for district heating in Paernu. There is an interest in the combined production of heat and power. The Association plans to set up the respective committee on engineering. The Energy Market Inspectorate was formed in Estonia on January 22, 1998. On April 1, 1999, the Estonian Center for Engineering Inspectorate was opened. The newly formed body will be dealing with accidents likely to happen. The banks are interested in financing Estonian energy projects as power engineering is a field of vital importance with stable money flows and low risk. One can get capital from Estonia more easily and quickly, so far to a limited amount and at a higher interest (small projects at 15 to 20 per cent) than from outside (in case of 2 thousand million EEK at 5 %). The weighted average of heat sold in Estonia, without turnover tax, was 302 EEK/MWh), variance 150 to 490 EEK/MWh. (author)

Distributional Effects of Environmental Taxes in Estonia

Directory of Open Access Journals (Sweden)

Helen Poltimäe

2013-01-01

Full Text Available This paper analyses the distributional effects of Estonian environmental taxes in 2000-2007 and recent reforms in 2008 using Estonian Household Budget Survey data and a microsimulation model. The results show that the share of environmental taxes in consumption expenditures is about 1-1.5%. Environmental taxes in 2000- 2007 were progressive due to the progressivity of motor fuel excises, which was the largest component of the environmental taxes until 2007. Since 2008, the taxes are less progressive, because of the new electricity excise and increased taxes on gas and other inputs used for distance domestic heating. To minimize the disproportionate effect of future ecological tax reform on low-income households, close monitoring of tax developments is required and necessary compensatory policies need to be implemented

The Baltic Klint beneath the central Baltic Sea and its comparison with the North Estonian Klint

Science.gov (United States)

Tuuling, Igor; Flodén, Tom

2016-06-01

Along its contact with the Baltic Shield, the margin of the East European Platform reveals a well-developed, flooded terraced relief. The most striking and consistent set of escarpments at the contact of the Lower Palaeozoic calcareous and terrigenous rocks, known as the Baltic Klint (BK), extends from northwest of Russia to the Swedish island of Öland. Marine seismic reflection profiling in 1990-2004 revealed the central Baltic Sea Klint (BSK) section in detail and enabled comparison of its geology/geomorphology with a classical klint-section onshore, namely the North Estonian Klint (NEK). The conception of the BK onshore, which is based on the land-sea separating terraced relief in northern Estonia, is not fully applicable beneath the sea. Therefore, we consider that the BSK includes the entire terraced Cambrian outcrop. We suggest the term "Baltic Klint Complex" to include the well-terraced margin of the Ordovician limestone outcrop, which is weakly developed in Estonia. Because of a steady lithological framework of the bedrock layers across the southern slope of the Fennoscandian Shield, the central BSK in the western and the NEK in the eastern part of the Baltic Homocline have largely identical morphologies. The North Estonian Ordovician limestone plateau with the calcareous crest of the BK extends across the central Baltic Sea, whereas morphological changes/variations along the Klint base occur due to the east-westerly lithostratigraphic/thickness changes in the siliciclastic Cambrian sequence. The verge of the NEK, located some 30-50 m above sea level, starts to drop in altitude as its east-westerly course turns to northeast-southwest in western Estonia. Further westwards, the BK shifts gradually into southerly deepening (0.1-0.2°) layers as its crest drops to c. 150 m below sea level (b.s.l.) near Gotska Sandön. This course change is accompanied by a considerable decrease in thickness of the platform sedimentary cover, as below the central Baltic Sea the

Harnessing the Power of Intellectual Capital.

Science.gov (United States)

Bassi, Laurie J.

1997-01-01

Describes intellectual capital--employees' brainpower, know-how, knowledge, and processes--and knowledge management--the processes by which a company creates and leverages intellectual capital--as the primary sources of competitive advantage in many industries. Offers ways to measure intellectual capital, a glossary, and additional resources. (JOW)

Programs for Students and Teachers | NREL

Science.gov (United States)

competition that tests the brainpower of middle and high school teams on science and math topics. Model Car and Education Programs promote science, technology, engineering, and mathematics (STEM) using Science educators provide hands-on experiences for students in grades 4-12 to learn about renewable energy

Renewable energy sources and Estonian national interests

International Nuclear Information System (INIS)

Veski, Rein

2002-01-01

There is only one national level document, The Long-term National Development Plan for the Fuel and Energy sector, regulating the development of renewable energy for Estonia. It was approved by the Parliament (Riigikogu) in 1998. This document planned a 2/3 (66,7%) increase in the share of renewable (according to the document: peat, biofuels and other renewables) to the year 2010 against 1996. At the same time a decrease of the share of domestic oil shale was planned 1/5 to the year 2010 against 1995. That means the use of domestic energy sources, both renewable and non-renewable, will decrease by 16,8% altogether. In reality the rapid projected growth of renewables in Estonia (+66,7% between 1996 and 2010) was changed with decrease of 20% by 2000. So the security of supply must shift to the first place in Estonia. It is also an issue of national sovereignty. Estonia is rich in renewable energy sources, mainly in wood, peat and wind, to achieve the goals set in the National Development Plan. Forest resources amount 352,7, total felling 6,44, allowed felling 7,81 million cubic meters solid volume in 2000. The future of fuel peat usage in Estonia is uncertain, as most of the EU member states, which have burned up their peat resources and/or drained their mires do not consider peat as a renewable fuel. Obviously Estonia has to explain its opinion about the renewability of its resources. Although progress is needed in all directions of additional use of all renewable energy sources in tactical consideration finance must be directed first to guarantee better use of wastes of woodworking and timber industry

Grupuskulaarne identiteediloome paremäärmuslaste võrgusuhtluses / The Formation of Groupuscular Identity in the Web Communication of the Estonian Extreme Right

Directory of Open Access Journals (Sweden)

Mari-Liis Madisson

2015-06-01

Full Text Available Teesid: Artikli eesmärgiks on avada eesti paremäärmuslaste tähendusloomet hüpermeedias. Roger Griffini teooria järgi iseloomustab paremäärmuslaste võrgusuhtluse väikeste mitteparteiliste üksuste – grupuskulite (nt veebilehed, blogid paljusus ja suhteline marginaalsus, rahulolematus praeguse maailmakorraga, ideede revolutsioonilisus ning risoomne ehk mitte-hierarhiline kommunikatsioonistruktuur. Täiendame Griffini teooriat kultuurisemiootika ideedega. Semiosfääri kontseptsioon võimaldab paremini analüüsida grupuskulite kommunikatsiooni eripära ja seal tekkivaid tähendushierarhiaid. Koodteksti mõiste selgitab aga, miks, vaatamata hüpermeedias kättesaadavale arvamuste paljususele, domineerivad grupuskulaarses kommunikatsioonis väga kindlad tähendusloome viisid.    S U M M A R Y The purpose of this article is to create a conceptual framework which would aid in the understanding of the characteristic ways the Estonian extreme right has created the prevalent identities and meanings that are currently in circulation in the media. The analysis is based on non-participant observation, by means of which we have attempted to isolate the main foci and dominant practices of self-description found in web communications among members of the Estonian extreme right. Based on the number of visitors to sites, the concentration of topics posted and frequency of citation, we take the following as representatives of extreme right positions: the blogs „The Nationalist“ („Rahvuslane“, „NS“, and „Nationalist“ („Rahvuslik“, and the alternative web pages „Be Aware“ („Ole Teadlik“ and „BHR Ruzzland“. Markers of the extreme right were present in the pages we examined at different levels of intensity; in fact, not every post to these pages clearly, not every page could be labelled as extreme right. Yet the general tonality of the webpages we examined included the following: an urgent need to conserve �

THE CATEGORIZATION OF THE ESTONIAN DOMAIN OF “MUSICAL INSTRUMENTS” ‒ LISTENERS VS MUSICIANS AND THE COMPARISON OF BASIC LEVELS

Directory of Open Access Journals (Sweden)

Martin Eessalu

2012-01-01

Full Text Available The article examines the prototypicality phenomena in the Estonian language’s lexical-semantic domain of “musical instruments”. There are two groups of people under examination: (i those who consider themselves actively involved in music (practitioners, and (iithose who don’t (listeners. To elicit basic terms, a cognitive salience index is used. The results show that the main common feature between the groups is that the basic level consists of the same members: klaver ‘piano’, kitarr ‘guitar’ and viiul ‘violin’. While klaver and viiul are stable in their nature, the salience of kitarr varies greatly, as listeners put it in the leading position and practitioners nearly leave it out of the basic level. Generally, the two groups share the same category structure,as based on cognitive salience index values both have: (i three basic terms, (ii a connecting group, and (iii the rest of the category members with their index values decreasing toward zero.

Field trial on progesterone cycles, metabolic profiles, body condition score and their relation to fertility in Estonian Holstein dairy cows.

Science.gov (United States)

Samarütel, J; Ling, K; Waldmann, A; Jaakson, H; Kaart, T; Leesmäe, A

2008-08-01

Resumption of luteal activity postpartum and fertility were investigated in an Estonian Holstein high milk production and good fertility dairy herd. Body condition was scored after every 10 days in 54 multiparous dairy cows (71 lactations) calving inside from December to March during 4-year period. Blood samples were taken 1-14 days before calving and 1-14, 28-42 and 63-77 days after calving: analytes estimated were serum aspartate aminotransferase (AST), glucose, ketone bodies, total cholesterol, non-esterified fatty acids and triglycerides. The general linear mixed model was used to compare the data for cows with different characteristics in luteal activity postpartum based on their milk progesterone profiles. Forty-five per cent of cases had abnormal profiles; delayed resumption of ovarian cyclicity postpartum (DC) was the most prevalent abnormality. There was no difference in body condition scores between the groups. The DC and prolonged luteal phase groups had higher serum AST activity (p fertility.

The Information Age?

Science.gov (United States)

MacVicar, Margaret L. A.

1985-01-01

The author examines the concept of information and how it relates to our future. She discusses the various waves of information about education: the decay of technology and the raid on educational institutions for brainpower made by business and industry, foreign competition, and the quality of education. (CT)

Sexual behavior, depressive feelings, and suicidality among Estonian school children aged 13 to 15 years.

Science.gov (United States)

Heidmets, L; Samm, A; Sisask, M; Kõlves, K; Aasvee, K; Värnik, A

2010-01-01

The present paper is based on a WHO Collaborative Cross-National Study "Health Behavior in School-Aged Children (HBSC)." It aimed at describing and analyzing how the sexual behaviors of 13- to 15-year-old Estonian school children were associated with self-reported depressive feelings and suicidality. Distinctive behavioral traits in relation to age of first sexual intercourse were also investigated. Self-reported questionnaires from school children (n = 3,055) were analyzed. In total, 15.2% of school children reported being nonvirgin. Among 13-year-olds, 2.9% of girls and 6.8% of boys were nonvirgins. Approximately 25% of the 15-year-old girls and boys were nonvirgins. The likelihood of depressive feelings and suicidal ideation increased significantly in both genders with loss of virginity. Boys who had lost their virginity at 13 years or younger were 4.2 times more likely to have suicidal thoughts; comparable girls were 7.8 times more likely to have suicidal thoughts. Compared to virgins, youths who had lost their virginity reported poor self-assessed health and more risk behaviors in themselves and their peers. Experiences of sexual intercourse increased the odds ratios for depressive feelings and suicidality. The earlier sexual intercourse was initiated, the greater were the odds of lower mental well-being. Risk behaviors emerged as a complex phenomenon requiring complex prevention.

Commit to Building on New England's "Employability" Advantage!

Science.gov (United States)

Gittell, Ross

2017-01-01

Higher education has provided New England with an economic advantage, as the region without strong natural resource advantages has relied on its higher education institutions (HEIs) and brainpower. A higher education-based economic advantage has enabled the region to develop strong well-paying technology and knowledge-based industries tied to New…

Research works at the Physics Institute nuclear reactor for the nuclear power engineering

International Nuclear Information System (INIS)

Gavars, V.V.; Kalnin'sh, D.O.; Lapenas, A.A.; Tomsons, E.Ya.; Ulmanis, U.A.

1985-01-01

Methods for neutron spectra determination in the nuclear reactor core and vessel have been developed. On their base the neutron spectra at the Novo-Voronezh and kola NPPs have been measured. Such measurements are necessary for the determination of the nuclear fuel reprocessing coefficients, for the evaluation of the construction radiation-damage stability and the NPP economical efficiency on the whole. A new type of the reactor regulator - a liquid metal one - has been created. Such regulators are promising in respect of their use at the NPPs. The base for studying new radiation-damage-stable insulators has been founded. The materials obtained are now applied to designing the reactors of the second (fast) and the third (thermonuclear H) generations. There have developed and by a long-time exploitation checked a hot loop, used for materials irradiation. the nuclear reactor in Salaspils provides training of students being the new brain-power for the nuclear power engineering

Non-cancer morbidity among Estonian Chernobyl cleanup workers: a register-based cohort study.

Science.gov (United States)

Rahu, Kaja; Bromet, Evelyn J; Hakulinen, Timo; Auvinen, Anssi; Uusküla, Anneli; Rahu, Mati

2014-05-14

To examine non-cancer morbidity in the Estonian Chernobyl cleanup workers cohort compared with the population sample with special attention to radiation-related diseases and mental health disorders. Register-based cohort study. Estonia. An exposed cohort of 3680 men (cleanup workers) and an unexposed cohort of 7631 men (population sample) were followed from 2004 to 2012 through the Population Registry and Health Insurance Fund database. Morbidity in the exposed cohort compared with the unexposed controls was estimated in terms of rate ratio (RR) with 95% CIs using Poisson regression models. Elevated morbidity in the exposed cohort was found for diseases of the nervous system, digestive system, musculoskeletal system, ischaemic heart disease and for external causes. The most salient excess risk was observed for thyroid diseases (RR=1.69; 95% CI 1.38 to 2.07), intentional self-harm (RR=1.47; 95% CI 1.04 to 2.09) and selected alcohol-related diagnoses (RR=1.25; 95% CI 1.12 to 1.39). No increase in morbidity for stress reactions, depression, headaches or sleep disorders was detected. No obvious excess morbidity consistent with biological effects of radiation was seen in the exposed cohort, with the possible exception of benign thyroid diseases. Increased alcohol-induced morbidity may reflect alcohol abuse, and could underlie some of the higher morbidity rates. Mental disorders in the exposed cohort were probably under-reported. The future challenge will be to study mental and physical comorbidities in the Chernobyl cleanup workers cohort. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Ubiquitous human computing.

Science.gov (United States)

Zittrain, Jonathan

2008-10-28

Ubiquitous computing means network connectivity everywhere, linking devices and systems as small as a drawing pin and as large as a worldwide product distribution chain. What could happen when people are so readily networked? This paper explores issues arising from two possible emerging models of ubiquitous human computing: fungible networked brainpower and collective personal vital sign monitoring.

Occurrence of clinical mastitis in primiparous Estonian dairy cows in different housing conditions

Directory of Open Access Journals (Sweden)

Aasmäe Birgit

2006-11-01

Full Text Available Abstract Background Objectives of the study were to document the impact of some management factors on the occurrence of clinical mastitis in primiparous dairy cows and to identify common udder pathogens of clinical mastitis in freshly calved heifers and multiparous cows on the day of calving. Methods A one-year study was conducted during 2004 and 2005 in 11 selected Estonian dairy herds. Data consisted of 68 heifers with clinical mastitis and 995 heifers without clinical mastitis on the day of calving. Multivariable logistic regression with a random herd effect was used to investigate any association between housing system or the time interval from movement of heifers to the calving facility and day of calving on occurrence of clinical mastitis. Milk samples for bacteriological analysis were collected from affected heifers and multiparous cows on the day of calving Results Clinical mastitis occurrence in the study population of freshly calved heifers equalled 6.1 %. Housing system was not a significant risk factor for clinical mastitis of freshly calved heifers. Moving heifers to the cowbarn less than two weeks before calving in tiestall farms increased risk (OR = 5.9 p = 0.001 for clinical mastitis at parturition. The most frequently isolated udder pathogens among heifers were Escherichia coli (22.1%, Streptococcus uberis (19.1% and coagulase-negative staphylococci (8.8%. In comparison, the main pathogen in multiparous cows with clinical mastitis at parturition was Staphylococcus aureus (11.2%. Conclusion Moving heifers to the calving facilities too late in tiestall farms increased risk for clinical mastitis at parturition. The isolated udder pathogens did not differ significantly in tiestall farms compared to freestall farms in heifers, but differences were found between heifers and multiparous cows at parturition.

Eesti venekeelse kirjanduse nullindate põlvkond: vastuvõtt ja tõrked omaks tunnistamisel / The Generation of the 2000s in the Russian Literature of Estonia: Acceptance and Obstacles to Acknowledgement

Directory of Open Access Journals (Sweden)

Igor Kotjuh

2013-06-01

Full Text Available The article researches the development of Russian-language literature in Estonia through the lens of Estonian literature. The article focuses on what is conditionally referred to as “authors of the younger generation” (born in 1970 and later since the creative works of representatives of this generation have attracted a lot of attention. That is the “naughts-generation”, as the authors of this generation made their debuts in literature in the 2000s.The article views the Estonian reaction to the books of Igor Kotjuh, P. I. Filimonov and Andrei Ivanov translated into Estonian. The analysis makes use of the reception theory of Hans Robert Jauss and Wolfgang Iser, scholars from Konstanz University, which makes it possible to propose two operational hypotheses: (1 numerous reviews hint at the fact that Estonian literary journals and critics do not consider works of Estonian Russian-speaking authors to be foreign literature; (2 as works of the Russian-speaking authors of Estonia have not been represented in a single literary anthology which has appeared in the 2000s, it can be concluded that there are certain obstacles regarding the works of Russian-speaking authors in Estonia.The Russian-speaking writers of Estonia have had good co-operation with Estonian colleagues and media, since they speak Estonian and their works have continuously appeared in Estonian translations. At the same time, the Russian-speaking literature of Estonia has not become a fully valued part of Estonian literature. Three major controversies can be found in the reception, where the horizons of Estonian readers and Russian-speaking Estonian authors do not coincide:(1 Literary-theoretical controversy. Estonian literary science has always identified Estonian literature via the Estonian language, yet the Russian-speaking authors who made their debuts in the 2000s are convinced that their works are, among other things, part of Estonian literature.(2 Political. Readers see

Frost related dieback in Estonian energy plantations of willows in relation to fertilisation and pathogenic bacteria

Energy Technology Data Exchange (ETDEWEB)

Cambours, M.A.; Nejad, P. [Department of Forest Mycology and Pathology, Swedish University of Agricultural Sciences, Box 7026, 750 07 Uppsala (Sweden); Heinsoo, K. [Institute of Zoology and Botany, Estonian Agricultural University, Riia 181, 51014 Tartu (Estonia); Granhall, U. [Department of Microbiology, Swedish University of Agricultural Sciences, Box 7025, 750 07 Uppsala (Sweden)

2006-03-15

Two 9-year old Estonian Salix plantations suffering from dieback were studied: one situated on poor mineral soil and divided into fertilised and unfertilised plots (Saare plantation) and another growing on a well-decomposed and nitrogen-rich organic soil, without fertiliser application (Kambja plantation). Bacteria from internal tissues of visually damaged shoots from seven clones were isolated in spring and autumn. The strains were subsequently biochemically characterised and tested for ice nucleation activity and pathogenicity on Salix. Some strains were also analysed with 16S rRNA. High numbers of culturable bacteria were found, belonging mainly to Erwinia, Sphingomonas, Pseudomonas and Xanthomonas spp. Fertilised plots were significantly more colonised by bacteria than unfertilised plots and also more extensively damaged, showing a lower density of living plants after 7 years of culture. More ice nucleation active (INA) strains were found in Saare fertilised plots and at Kambja than in Saare unfertilised plots. Likewise, most pathogenic strains were isolated from Saare fertilised plots and from Kambja. For some of the willow clones studied, dieback appeared to be related to both clonal frost sensitivity and abundance of INA and pathogenic bacteria. The plantations probably suffered from the presence of high amounts of pathogens and from frost related injuries aggravated by INA bacteria. Most probably the fertilisation at Saare and the nitrogen-rich soil at Kambja created a favourable environment for bacterial development and led to high dieback levels after the first harvest. (author)

The Estonian study of Chernobyl cleanup workers: I. Design and questionnaire data

International Nuclear Information System (INIS)

Tekkel, M.; Rahu, M.; Veidebaum, T.

1997-01-01

Nearly 2% of the male population of Estonia aged 20-39 years were sent to Chernobyl to assist in the cleanup activities after the reactor accident. A cohort of 4,833 cleanup workers was assembled based on multiple and independent sources of information. Information obtained from 3,704 responses to a detailed questionnaire indicated that 63% of the workers were sent to Chernobyl in 1986; 54% were of Estonian and 35% of Russian ethnicity; 72% were married, and 1,164 of their 5,392 children were conceived after the Chernobyl disaster. The workers were less educated than their counterparts than their counterparts in the general population of Estonia, and only 8.5% had attended university. Based on doses entered in workers records, the mean dose was 11 cGy, with only 1.4% over 25 cGy. Nearly 85% of the workers were sent as part of military training activities, and more than half spent in excess of 3 months in the Chernobyl area. Thirty-six percent of the workers reported having worked within the immediate vicinity of the accident site; 11.5% worked on the roofs near the damaged reactor, clearing the highly radioactive debris. The most commonly performed task was the removal and burial of topsoil (55% of the workers). Potassium iodide was given to over 18% of the men. The study design also incorporates biological indicators of exposure based on the glycophorin A mutational assay of red blood cells and chromosome translocation analyses of lymphocytes; record linkage with national cancer registry and mortality registry files to determine cancer incidence and cause-specific mortality; thyroid screening examinations with ultrasound and fine-needle biopsy; and cryopreserved white blood cells and plasma for future molecular studies. Comprehensive studies of Chernobyl cleanup workers have potential to provide a new information about cancer risks due to protracted exposures to ionizing radiation. 21 refs., 1 fig., 11 tabs

On using an efficiency matrix in analysing profit per employee (on the basis of the Estonian SME software sector 

Directory of Open Access Journals (Sweden)

Paavo Siimann

2015-11-01

Full Text Available Service companies earn their profit mainly due to their employees’ intellectual skills, therefore, increasing profit per employee is one opportunity to increase profit and thereby also the company’s market value. In this article the number of employees, the value of owners’ equity and loan capital, operating expenses, net sales and profit before income tax have been used to analyse the change in profit per employee of the Estonian software small and medium-sized enterprise (SME sector in total, and for small and medium-sized companies separately in the years 2009–2013. Furthermore, this article demonstrates that the efficiency matrix methodology and its developments that were refined in Estonia and Russia from the 1960s to the 1990s can be deployed nowadays as well. Of all the components, profit margin and owners’ equity per employee showed the most rapid growth during the analysed period. Profit per employee was higher in the small enterprises segment and lowest among medium-sized enterprises, where owners’ equity per employee, net sales to operating expenses, and profit margin were lower than in small enterprises over the whole period analysed.

Development of renewable energetics needs knowledge, skills and co-operation

International Nuclear Information System (INIS)

Elmet, Henn; Tiit, Valdur

2000-01-01

Full text: The principles of sustainable lifestyle that are based on natural balance spread nowadays more and more widely. The broad use of renewable energy sources enables to meet the population's need for energy, keeping at the same time our life environment clean. These principles must also be followed at the development of Estonian economy, taking into consideration the responsibilities of the present generation to the following ones. It means that we are obliged to protect healthy environment and to preserve our resources for the sake of the whole world. We have to behave in such a way that we would not decrease our descendants' hope for a happy life neither in the close nor in the further future. The sphere of activity of the Estonian Agricultural University is very broad, including to a smaller or greater extent everything that is connected with farming and forestry. For decades we have successfully developed scientific research on forestry and educated a lot of good workers. Many of them work successfully in the enterprises that are connected with timber fuel, using thus raw material that is energetically renewable and implementing the principles of sustainable development. As the initiators and to a certain extent also organisers of the present conference we would especially like to stress that the role of our University both in the use of renewable sources of energy and the production of energetic raw material is constantly growing. Due to the change of the economic situation it is not reasonable to produce as much foodstuffs as ten year ago in Estonia. On the spare land it is possible to grow plants that store solar energy and that enable to produce different biofuels. During summer approximately 5 mln kWh of solar energy fall on one hectare of land in our conditions. Taking into account the efficiency of plants and the cost of production we might receive a couple of tons of diesel fuel as so-called pure receipts. As the area of unused farmland is at

The effects of political and economic transitions on health and safety in Estonia: an Estonian-Swedish comparative study.

Science.gov (United States)

Kaasik, T; Andersson, R; Hörte, L G

1998-11-01

A general and dramatic deterioration of health in Estonia during the transition period 1990-1994 was analysed using Sweden as a comparative example. Though there were diverging trends between Estonia and Sweden in the leading cause of death, cardiovascular diseases, the gap in mortality from injury had increased most rapidly. While the injury mortality rate slightly decreased in Sweden from 1990 to 1994, it almost doubled in Estonia. In 1994, the total injury death rate for men was about 6 times higher in Estonia than in Sweden. The death rates for some types of injuries, such as alcohol intoxication and homicide, were many tenfolds higher in Estonia than in Sweden. Injury contributed the most to the widening health gap between the countries, especially in males. The mechanisms of this sudden health deterioration remain to be fully explained. It could be hypothesised that behind the traditional behavioural risk factors, the influence of socio-political factors related to economic and political reconstruction is present. A widespread risk-taking and unhealthy behaviour among Estonians can likely be partly explained as a way of coping with the distress created by the new demands of transition society. An important challenge on the way to improvement is creating the political will among policy-makers to confront the tremendous problems of controlling the factors in society that affect the population's health in Estonia.

SAS üritab panna riiki lennufirma aktsiaid müüma / Lemmi Kann

Index Scriptorium Estoniae

Kann, Lemmi

2007-01-01

SAS-i eesmärgiks on saada enamusosalus nii Estonian Airis kui ka airBalticus, et seeläbi oma positsioone Baltimaades kinnistada. Diagramm: Estonian Airi majandusnäitajad ja omanikud. Vt. samas: SAS on Estonian Airi jahtinud kaua. Kommenteerib Raivo Vare

Fuel Exhaling Fuel Cell.

Science.gov (United States)

Manzoor Bhat, Zahid; Thimmappa, Ravikumar; Devendrachari, Mruthyunjayachari Chattanahalli; Kottaichamy, Alagar Raja; Shafi, Shahid Pottachola; Varhade, Swapnil; Gautam, Manu; Thotiyl, Musthafa Ottakam

2018-01-18

State-of-the-art proton exchange membrane fuel cells (PEMFCs) anodically inhale H 2 fuel and cathodically expel water molecules. We show an unprecedented fuel cell concept exhibiting cathodic fuel exhalation capability of anodically inhaled fuel, driven by the neutralization energy on decoupling the direct acid-base chemistry. The fuel exhaling fuel cell delivered a peak power density of 70 mW/cm 2 at a peak current density of 160 mA/cm 2 with a cathodic H 2 output of ∼80 mL in 1 h. We illustrate that the energy benefits from the same fuel stream can at least be doubled by directing it through proposed neutralization electrochemical cell prior to PEMFC in a tandem configuration.

Developments in production of synthetic fuels out of Estonian shale

Energy Technology Data Exchange (ETDEWEB)

Aarna, Indrek

2010-09-15

Estonia is still the world leader in utilization of oil shale. Enefit has cooperated with Outotec to develop a new generation of solid heat carrier technology - Enefit280, which is more efficient, environmentally friendlier and has higher unit capacity. Breakeven price of oil produced in Enefit280 process is competitive with conventional oils. The new technology has advantages that allow easy adaptation to other oil shales around the world. Hydrotreated shale oil liquids have similar properties to crude oil cuts. Design for a shale oil hydrotreater unit can use process concepts, hardware components, and catalysts commercially proven in petroleum refining services.

V. Tormis: "Bridge of Song / Brian Hunt

Index Scriptorium Estoniae

Hunt, Brian

1997-01-01

Uuest heliplaadist "V. Tormis: "Bridge of Song" - Bridge of Song; Singing aboard ship; Brides Farewell; Kihnu Island Wedding Songs; 17 Estonian Wedding Songs; Three Estonian Game Songs; Four Estonian Lullabies. Estonian Radio Choir / Toomas Kapten. Finlandia 4509 96937-2; 56:52 DDD; "People of Kalevala" - God protect us from war; Vespian Winter; Eagle Flew From the North East; Plague Memory; Vainamoinen's Words of Wisdom; The Seventeenth Rune of Kalevala. National Male Choir of Estonia. Finlandia 0630 12245-2; 56:52 DDD

Šampoonivõltsijast sai kardetud jäätmete töötleja / Mihkel Kärmas

Index Scriptorium Estoniae

Kärmas, Mihkel, 1974-

2009-01-01

OÜ Megonar omanik Ahto Laanemägi sai loa ladustada kuni 60 000 t tselluloositehase Estonian Cell jäätmeid Noonu külas Virumaal. Põllumajandusteadlane Valjo Masso on leidnud Estonian Celli jääkmudast ootamatuid keemilisi elemente, nt. raskmetalle. Austria labori hinnang Estonian Celli muda kohta

Is biomass always a renewable fuel as guaranteed?

International Nuclear Information System (INIS)

Veski, Rein

1999-01-01

alternative electric energy must be energy which is not produced from oil shale. TheLong-Term Development Plan for the Estonian Fuel and Energy Sector includes such misleading terms as peat, wood and renewable energy resources, biofuels and peat. However, there are also quite correct phrases such as peat, wood and other renewable natural resources, as wood and other biofuels are renewable natural resources. As a rule, wood and wood waste, energy cultures, agricultural, woodpulp and paper industry waste, as well as solid animal breeding and household waste, and also peat are classified as biomass in many countries. Biomass seems to be a more convenient term instead of renewable biofuel. In most statements it is with no doubt classified as renewable resource, while biofuels are not because fossil fuels are also biofuels (or fuels of biological origin) and they are renewable only to a very limited extent. Fossil fuels originated in sapropel and peat, oil and natural gas from dispersed organic matter, too. So, their recovery depends on the speed of accumulation of organic carbon in recent sediments. The recovery should not be a question of what somebody believes in or not. It must not be a 'religious' question but a purely scientific and methodological issue. There is only one condition when a fuel (or biomass as one type of biofuel) is renewable: biomass or biofuel may be considered renewable if they are replenished at a rate which is comparable to the rate at which they are consumed in a country or part of it (on an island, for example). The overused amount is a non-renewable biomass or biofuel. So, the replenishment of biomass or biofuel is not guaranteed. Biomass and other biofuels, including fossil ones, are products of the activity of the sun. There are also other, non-fuel types of energy such as water and wind energy, as well as solar and geothermal energy. They are also considered renewable energy resources as is biomass. All these types of energy (except, may be, the

Fuel cell generator with fuel electrodes that control on-cell fuel reformation

Science.gov (United States)

Ruka, Roswell J [Pittsburgh, PA; Basel, Richard A [Pittsburgh, PA; Zhang, Gong [Murrysville, PA

2011-10-25

A fuel cell for a fuel cell generator including a housing including a gas flow path for receiving a fuel from a fuel source and directing the fuel across the fuel cell. The fuel cell includes an elongate member including opposing first and second ends and defining an interior cathode portion and an exterior anode portion. The interior cathode portion includes an electrode in contact with an oxidant flow path. The exterior anode portion includes an electrode in contact with the fuel in the gas flow path. The anode portion includes a catalyst material for effecting fuel reformation along the fuel cell between the opposing ends. A fuel reformation control layer is applied over the catalyst material for reducing a rate of fuel reformation on the fuel cell. The control layer effects a variable reformation rate along the length of the fuel cell.

Fuel and nuclear fuel cycle

International Nuclear Information System (INIS)

Prunier, C.

1998-01-01

The nuclear fuel is studied in detail, the best choice and why in relation with the type of reactor, the properties of the fuel cans, the choice of fuel materials. An important part is granted to the fuel assembly of PWR type reactor and the performances of nuclear fuels are tackled. The different subjects for research and development are discussed and this article ends with the particular situation of mixed oxide fuels ( materials, behavior, efficiency). (N.C.)

Kirjanduslikest kontaktidest läbi raudse eesriide / Literary contacts through the iron curtain

Directory of Open Access Journals (Sweden)

Marin Laak

2016-09-01

Full Text Available The article deals with the relationship between the literature of the Estonian diaspora in the West and Soviet Estonia during the 1960s, and explores the possibility, from the literary historiographical perspective, of integrating the two bodies of Estonian literature. Near the end of The Second World War close to 70,000 Estonians fled their homeland, fearing Soviet repression; among them were numerous members of the academic and artistic intelligentsia as well as eminent poets and writers. By the late 1940s national organizations, publications and other activities were already well underway in the displaced persons camps. During the 1950s, Estonian exiles who settled in Sweden, Canada, United States, and elsewhere in the West quickly formed national cultural centres, publishing houses and numerous organizations that helped maintain their national and cultural identity. The centre of literary activity in the West was Sweden, which most Estonian writers had chosen as their new home. The Estonian Writers’s Co-operative publishing house, established in Lund in 1950, started the mail-order distribution of Estonian literature throughout the world; elsewhere, the publisher Orto operated in Toronto. While no propaganda-free literature or literature of any artistic merit was published in the 1940s and 1950s in Estonia during the Soviet occupation, exile literature flourished. Then, the Khrushchev Thaw brought about changes to Soviet society in the late 1950s. As their world became more free, a new generation of talented young poets emerged who generated innovations in poetry and modernized literature. This article maps literary contacts between the Estonian homeland and her exiles, and, using archival material, focuses on personal contacts among the literati during the 1960s. Literary historiography began investigating the possibility of treating Estonian literature in the homeland and in the West as one body of literature, when, after a 45-year

Sulphation of oil shale ash under atmospheric and pressurized combustion conditions

International Nuclear Information System (INIS)

Kuelaots, I.; Yrjas, P.; Hupa, M.; Ots, A.

1995-01-01

One of the main problems in conventional combustion boilers firing pulverized oil shale is the corrosion and fouling of heating surfaces, which is caused by sulphur compounds. Another major problem, from the environmental point of view, are the high SO 2 emissions. Consequently, the amount of sulphur in flue gases must be reduced. One alternative to lower the SO 2 , concentration is the use of new technologies, such as pressurized fluidized bed combustion (PFBC). In FBC processes, the sulphur components are usually removed by the addition of limestone (CaCO 3 ) or dolomite (CaCO 3 x MgCO 3 ) into the bed. The calcium in these absorbents react with SO 2 , producing solid CaSO 4 . However, when burning oil shale, there would be no need to add limestone or dolomite into the bed, due to the initially high limestone content in the fuel (molar ratio Ca/S =10). The capture of sulphur by oil shale ashes has been studied using a pressurized thermogravimetric apparatus (PTGA). The chosen experimental conditions were typical for atmospheric and pressurized fluidized bed combustion. Four different materials were tested - one cyclone ash from an Estonian oil shale boiler, two size fractions of Estonian oil shale and, one fraction of Israeli oil shale. The cyclone ash was found to be the poorest sulphur absorbent. In general, the results from the sulphur capture experiments under both atmospheric and pressurized fluidized bed conditions showed that the oil shale can capture not only its own sulphur but also significant amounts of additional sulphur from another fuel if the fuels are mixed together. (author)

Bullying at work: do industries differ in the Estonian case? Kas psühholoogilise töövägivalla levik on majandus-sektorites erinev: olukord Eestis?

Directory of Open Access Journals (Sweden)

Merle Tambur

2012-01-01

Full Text Available The bullying at work has not so far analyzed in Estonia – its dispersal, causes and impact have not studied, while in the countries with long democratic traditions it has been the actual problem of work context for two decades. The current study examines the prevalence of workplace bullying in Estonian organizations and the extent of the problem by industries because bullying may put impact on the employees´ efficiency. The sample consists of 1941 respondents which covers 59 organizations across Estonia and represents in all over 30 000 employee and the unemployed. The results reveal that bullying poses a serious problem in Estonia. According to Leymann´s criteria (1996 at least one negative act per week with a duration of at least 6 months, has been reported by 23,44% of respondents. Although, it came out that bullying is not sector-specific problem in Estonia, several and different industries are vulnerable from bullying.

HTGR fuel and fuel cycle technology

International Nuclear Information System (INIS)

Lotts, A.L.; Homan, F.J.; Balthesen, E.; Turner, R.F.

1977-01-01

Significant advances have occurred in the development of HTGR fuel and fuel cycle. These accomplishments permit a wide choice of fuel designs, reactor concepts, and fuel cycles. Fuels capable of providing helium outlet temperatures of 750 0 C are available, and fuels capable of 1000 0 C outlet temperatures may be expected from extension of present technology. Fuels have been developed for two basic HTGR designs, one using a spherical (pebble bed) element and the other a prismatic element. Within each concept a number of variations of geometry, fuel composition, and structural materials are permitted. Potential fuel cycles include both low-enriched and high-enriched Th- 235 U, recycle Th- 233 U, and Th-Pu or U-Pu cycles. This flexibility offered by the HTGR is of great practical benefit considering the rapidly changing economics of power production. The inflation of ore prices has increased optimum conversion ratios, and increased the necessity of fuel recycle at an early date. Fuel element makeup is very similar for prismatic and spherical designs. Both use spherical fissile and fertile particles coated with combinations of pyrolytic carbon and silicon carbide. Both use carbonaceous binder materials, and graphite as the structural material. Weak-acid resin (WAR) UO 2 -UC 2 fissile fuels and sol-gel-derived ThO 2 fertile fuels have been selected for the Th- 233 U cycle in the prismatic design. Sol-gel-derived UO 2 UC 2 is the reference fissile fuel for the low-enriched pebble bed design. Both the United States and Federal Republic of Germany are developing technology for fuel cycle operations including fabrication, reprocessing, refabrication, and waste handling. Feasibility of basic processes has been established and designs developed for full-scale equipment. Fuel and fuel cycle technology provide the basis for a broad range of applications of the HTGR. Extension of the fuels to higher operating temperatures and development and commercial demonstration of fuel

Constant strength fuel-fuel cell

International Nuclear Information System (INIS)

Vaseen, V.A.

1980-01-01

A fuel cell is an electrochemical apparatus composed of both a nonconsumable anode and cathode; and electrolyte, fuel oxidant and controls. This invention guarantees the constant transfer of hydrogen atoms and their respective electrons, thus a constant flow of power by submergence of the negative electrode in a constant strength hydrogen furnishing fuel; when said fuel is an aqueous absorbed hydrocarbon, such as and similar to ethanol or methnol. The objective is accomplished by recirculation of the liquid fuel, as depleted in the cell through specific type membranes which pass water molecules and reject the fuel molecules; thus concentrating them for recycle use

Vitamin D as a possible independent predictor of bone mineral density in Estonian adults: a cross-sectional population-based study.

Science.gov (United States)

Kull, M; Kallikorm, R; Lember, M

2012-06-01

Vitamin D insufficiency and deficiency are prevalent worldwide, with the highest prevalence in the northern countries due to the lack of ultraviolet exposure. The individual effect of vitamin D on bone mineral density (BMD) has been studied but the results are inconclusive. The aim of our study was to investigate the effect of vitamin D on BMD in a random population-based cohort of Estonian adults. A cross-sectional population-based study. A total of 273 individuals free of diseases or states known to affect bone or vitamin D metabolism participated in the study. We measured BMD, vitamin D and parathyroid hormone concentrations (in winter and in summer). Several co-variables were included in the regression analysis, including age, smoking, alcohol consumption, body mass index, physical activity, fresh milk consumption, caffeinated beverage consumption, lean tissue mass and total body fat percentage, and in women the number of children and breastfeeding history. We show that summer vitamin D independently correlates with BMD in lumbar spine, trochanter and total body regions (P vitamin D predicts independently lumbar spine (P body BMD (P mass and fat mass were additional contributors of the BMD (P body composition indices, vitamin D could be an independent contributor of BMD in several skeletal regions in men and women. © 2010 The Authors. Internal Medicine Journal © 2010 Royal Australasian College of Physicians.

17 September 2013 - Estonian Minister of Education and Research J. Aaviksoo signing the guest book with CERN Director-General R- Heuer; visiting the TOTEM facility with TOTEM Collaboration Spokesperson S. Giani; in the LHC tunnel at Point 5 with International Relations Adviser T. Kurtyka and visiting the CMS cavern with CMS Collaboration Spokesperson J. Incandela. International Relations Adviser R. Voss present.

CERN Multimedia

Anna Pantelia

2013-01-01

17 September 2013 - Estonian Minister of Education and Research J. Aaviksoo signing the guest book with CERN Director-General R- Heuer; visiting the TOTEM facility with TOTEM Collaboration Spokesperson S. Giani; in the LHC tunnel at Point 5 with International Relations Adviser T. Kurtyka and visiting the CMS cavern with CMS Collaboration Spokesperson J. Incandela. International Relations Adviser R. Voss present.

The National Shipbuilding Research Program. Proceedings of the REAPS Technical Symposium. Paper No. 16: Quality Circles -- Doing Business Better at Philadelphia Naval Shipyard

Science.gov (United States)

1981-09-01

improving productivity has rapidly grown in the last two and one-half years in both the public and private sectors . According to a 21 February 1980 article...method, or process disclosed in this report may not infringe privately owned rights; or (B) assumes any liabilities with respect to the use of or for...the brainpower of people by allowing them to participate in making heretofore management decisions to improve their quality of worklife . The structure

Fuels processing for transportation fuel cell systems

Science.gov (United States)

Kumar, R.; Ahmed, S.

Fuel cells primarily use hydrogen as the fuel. This hydrogen must be produced from other fuels such as natural gas or methanol. The fuel processor requirements are affected by the fuel to be converted, the type of fuel cell to be supplied, and the fuel cell application. The conventional fuel processing technology has been reexamined to determine how it must be adapted for use in demanding applications such as transportation. The two major fuel conversion processes are steam reforming and partial oxidation reforming. The former is established practice for stationary applications; the latter offers certain advantages for mobile systems and is presently in various stages of development. This paper discusses these fuel processing technologies and the more recent developments for fuel cell systems used in transportation. The need for new materials in fuels processing, particularly in the area of reforming catalysis and hydrogen purification, is discussed.

Towards The Operational Oceanographic Model System In Estonian Coastal Sea, Baltic Sea

Science.gov (United States)

Kõuts, T.; Elken, J.; Raudsepp, U.

An integrated system of nested 2D and 3D hydrodynamic models together with real time forcing data asquisition is designed and set up in pre-operational mode in the Gulf of Finland and Gulf of Riga, the Baltic Sea. Along the Estonian coast, implicit time-stepping 3D models are used in the deep bays and 2D models in the shallow bays with ca 200 m horizontal grid step. Specific model setups have been verified by in situ current measurements. Optimum configuration of initial parameters has been found for certain critical locations, usually ports, oil terminals, etc. Operational system in- tegrates also section of historical database of most important hydrologic parameters in the region, allowing use of certain statistical analysis and proper setup of initial conditions for oceanographic models. There is large variety of applications for such model system, ranging from environmental impact assessment at local coastal sea pol- lution problems to forecast of offshore blue algal blooms. Most probable risk factor in the coastal sea engineering is oil pollution, therefore current operational model sys- tem has direct custom oriented output the oil spill forecast for critical locations. Oil spill module of the operational system consist the automatic weather and hydromet- ric station (distributed in real time to internet) and prognostic model of sea surface currents. System is run using last 48 hour wind data and wind forecast and estimates probable oil deposition areas on the shoreline under certain weather conditions. Cal- culated evolution of oil pollution has been compared with some real accidents in the past and there was found good agreement between model and measurements. Graphi- cal user interface of oil spill model is currently installed at location of port authorities (eg. Muuga port), so in case of accidents it could be used in real time supporting the rescue operations. In 2000 current pre-operational oceanographic model system has been sucessfully used to

Ethnic Russian Minority in Estonia

Directory of Open Access Journals (Sweden)

Włodarska-Frykowska Agata

2016-12-01

Full Text Available The article examines the position of Russians in Estonia and their relation with ethnic Estonians. The author analyzes models of the society integration introduced by Tallinn after 1991. The results raise questions regarding language education in Estonia, the proficiency level of Estonian is getting widely known by Russians, but on the other hand, there is still a significant part of the population that cannot communicate in Estonian. Those who have a good command of Estonian tend to be better integrated and to coexist with both Estonians and Russians. Russians living in Estonia are supposed to be equally involved in social and political life of the state. The potential of all residents has to be effectively and considerably used, especially when the number of population is decreasing. The position of Russians in Estonia is a major domestic and bilateral issue in the relations with the Russian Federation.

Muutustest eesti keele grammatiliste käänete kasutamisel

Directory of Open Access Journals (Sweden)

Pille Eslon

2010-05-01

Full Text Available Th e paper compares the frequency of some Estonian grammatical cases (nominative-genitive-partitive, as well as morphological preferences, in standard Estonian and in Estonian learner language. Th e aim is to report on certain typological changes in Estonian, which may have been triggered by various factors (e.g. verbs losing their aspectual characteristics, aspect marked by object case alternation, certain grammatical cases expressing no signifi cant meaning distinctions from the perspective of pragmatics but are nevertheless formed by analogy in the general process of grammaticalization. In Estonian, these changes, especially the observation that certain alternating grammatical cases are losing their (semantic contrasts either partially or totally, and that the preferred form of the nominal in the position of the direct object (or rhema is the nominative case, cannot be explained by language contact unlike, for example, in Karelian dialects in which one grammatical case, i.e. the accusative, is taking over the functions of other cases.

Eesti suulise keele korpus keeleõppedialoogide lähtematerjalina: telefonivestluste koostamine

Directory of Open Access Journals (Sweden)

Raili Pool

2011-10-01

Full Text Available Language authenticity in study materials and related learning activities are very important for foreign language teaching. Telephone conversations included in textbooks of Estonian as a second language are often not realistic with respect to the structure of their openings and closings. ne method to make Estonian language learning dialogues more realistic is to incorporate the corpus of spoken Estonian of the University of Tartu as the source.

Fuel performance and operation experience of WWER-440 fuel in improved fuel cycle

International Nuclear Information System (INIS)

Gagarinski, A.; Proselkov, V.; Semchenkov, Yu.

2007-01-01

The paper summarizes WWER-440 second-generation fuel operation experience in improved fuel cycles using the example of Kola NPP units 3 and 4. Basic parameters of fuel assemblies, fuel rods and uranium-gadolinium fuel rods, as well as the principal neutronic parameters and burn-up achieved in fuel assemblies are presented. The paper also contains some data concerning the activity of coolant during operation (Authors)

Saksa kirjandus Noor-Eesti ajal. Young Estonia and German Literature

Directory of Open Access Journals (Sweden)

Liina Lukas

2012-04-01

Full Text Available Impelled by a desire to free themselves from the German influence that had dominated the development of Estonian literature, and from the one-sided relation of cultural dependence that had lasted several hundred years, the Young Estonia movement sought to modernize Estonian literature through borrowing from other European literatures, in particular from French, Scandinavian, and Finnish. This article seeks to clarify the relative importance and selection criteria of translations from German literature for the literary field of the Young Estonia era. Further, I seek to elucidate Young Estonia’s contribution to the renewal of these selection criteria in the first, but more importantly the second decade of the 20th century. The long list of translations from German to Estonian at the beginning of the century speaks of the ”light Muse” of German family newspapers, with an admixture of the following: naturalist light fiction with a social theme and social drama; the historical novel (great favourite of the era of historicism, trendy fiction for both feminine and masculine audiences, and an overwhelming proportion of ”Heimatskunst” (literature of local colour. In the first and second decade of the new century, new names appear on the Estonian literary scene that signal a change in taste. For example, naturalist authors (Kretzer, Hauptmann, Halbe, Dehmel crop up sporadically amidst texts meant for leisure reading. Although the first translations of Nietzsche only appeared in 1901, already in 1902 critics had reason to speak of ”Nietzsche in Estonian literature”. 1910 marked the breakthrough of Viennese modernism in the Estonian literary field (Schnitzler, Altenberg, Bahr. Under the influential protection of the Young Estonians (Suits, Kallas, and published by the Young Estonia Publishing House, Baltic German novellawriter Eduard Keyserling enters the Estonian literary scene. Though ”mass consumption” literature from Germany continued

Advanced fuel development at AECL: What does the future hold for CANDU fuels/fuel cycles?

Energy Technology Data Exchange (ETDEWEB)

Kupferschmidt, W.C.H. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada)

2013-07-01

This paper outlines advanced fuel development at AECL. It discusses expanding the limits of fuel utilization, deploy alternate fuel cycles, increase fuel flexibility, employ recycled fuels; increase safety and reliability, decrease environmental impact and develop proliferation resistant fuel and fuel cycle.

HTGR fuel and fuel cycle technology

International Nuclear Information System (INIS)

Lotts, A.L.; Coobs, J.H.

1976-08-01

The status of fuel and fuel cycle technology for high-temperature gas-cooled reactors (HTGRs) is reviewed. The all-ceramic core of the HTGRs permits high temperatures compared with other reactors. Core outlet temperatures of 740 0 C are now available for the steam cycle. For advanced HTGRs such as are required for direct-cycle power generation and for high-temperature process heat, coolant temperatures as high as 1000 0 C may be expected. The paper discusses the variations of HTGR fuel designs that meet the performance requirements and the requirements of the isotopes to be used in the fuel cycle. Also discussed are the fuel cycle possibilities, which include the low-enrichment cycle, the Th- 233 U cycle, and plutonium utilization in either cycle. The status of fuel and fuel cycle development is summarized

Kellele kuulub keel? / Maarja Siiner

Index Scriptorium Estoniae

Siiner, Maarja

2012-01-01

Arvustus: Kadri Koreinik. Language ideologies in the contemporary Estonian public: with a focus on South Estonian. Tartu : Tartu University Press, 2011.(Dissertationes sociologicae Universitatis Tartuensis ; 5)

76 FR 37703 - Regulation of Fuels and Fuel Additives: 2012 Renewable Fuel Standards; Public Hearing

Science.gov (United States)

2011-06-28

... Regulation of Fuels and Fuel Additives: 2012 Renewable Fuel Standards; Public Hearing AGENCY: Environmental... hearing to be held for the proposed rule ``Regulation of Fuels and Fuel Additives: 2012 Renewable Fuel... be proposing amendments to the renewable fuel standard program regulations to establish annual...

Multi-fuel reformers for fuel cells used in transportation. Phase 1: Multi-fuel reformers

Science.gov (United States)

1994-05-01

DOE has established the goal, through the Fuel Cells in Transportation Program, of fostering the rapid development and commercialization of fuel cells as economic competitors for the internal combustion engine. Central to this goal is a safe feasible means of supplying hydrogen of the required purity to the vehicular fuel cell system. Two basic strategies are being considered: (1) on-board fuel processing whereby alternative fuels such as methanol, ethanol or natural gas stored on the vehicle undergo reformation and subsequent processing to produce hydrogen, and (2) on-board storage of pure hydrogen provided by stationary fuel processing plants. This report analyzes fuel processor technologies, types of fuel and fuel cell options for on-board reformation. As the Phase 1 of a multi-phased program to develop a prototype multi-fuel reformer system for a fuel cell powered vehicle, the objective of this program was to evaluate the feasibility of a multi-fuel reformer concept and to select a reforming technology for further development in the Phase 2 program, with the ultimate goal of integration with a DOE-designated fuel cell and vehicle configuration. The basic reformer processes examined in this study included catalytic steam reforming (SR), non-catalytic partial oxidation (POX) and catalytic partial oxidation (also known as Autothermal Reforming, or ATR). Fuels under consideration in this study included methanol, ethanol, and natural gas. A systematic evaluation of reforming technologies, fuels, and transportation fuel cell applications was conducted for the purpose of selecting a suitable multi-fuel processor for further development and demonstration in a transportation application.

Biogas production and its use as transport fuel in Turku, Salo and Kymenlaakso regions; Suunnitelma liikennebiokaasun tuotannon ja kaeytoen edistaemiseksi Turun, Salon ja Kymenlaakson seuduilla

Energy Technology Data Exchange (ETDEWEB)

Rasi, S.; Lehtonen, E.; Aro-Heinilae, E. [and others

2012-11-01

The main objective of the project was to promote biogas production and its use as transport fuel. The aims in the four Finnish and two Estonian case areas were to reduce the amount and improve the sustainable use of waste and sludge, to promote biogas production, to start biogas use as transport fuel and to provide tools for implementing the aims. The results of this study show that achieving the food waste prevention target (-30% from the 2009 biowaste amount) will decrease greenhouse gas emissions by 100 000 CO{sub 2}-eq tons and result in monetary savings for the waste generators amounting to almost 230 euro/capita on average in Turku, Salo and Kymenlaakso case regions in 2020. The results show that waste prevention should be the first priority in waste management and the use of waste materials as feedstock for energy production the second priority. In total 2.8 TWh energy could be produced from available biomass in the Turku, Salo and Kymenlaakso regions. This corresponds to the fuel consumption of about 250 000 passenger cars. When a Geographical Information System (GIS) was used to identify suitable biogas plant site locations with particular respect to the spatial distribution of available biomass, it was found that a total of almost 50 biogas plants with capacity varying from 2.1 to 8.4 MW could be built in the case regions. This corresponds to 1.9 TWh energy and covers almost 40% of the passenger car fuel consumption in these regions. Using all produced biogas (2.2 TWh energy) for transport fuel GHG emissions would lead to a 450 000 t CO{sub 2}-eq reduction. The same effect on emissions would be gained if more than 100 000 passenger cars were to be taken off the roads. On average, the energy consumed by biogas plants represents approximately 20% of the produced energy. The results also show that biomethane production from waste materials is profitable. In some cases the biomethane production costs can be covered with the gained gate fees. The cost of

Fuel assembly

International Nuclear Information System (INIS)

Chaki, Masao; Nishida, Koji; Karasawa, Hidetoshi; Kanazawa, Toru; Orii, Akihito; Nagayoshi, Takuji; Kashiwai, Shin-ichi; Masuhara, Yasuhiro

1998-01-01

The present invention concerns a fuel assembly, for a BWR type nuclear reactor, comprising fuel rods in 9 x 9 matrix. The inner width of the channel box is about 132mm and the length of the fuel rods which are not short fuel rods is about 4m. Two water rods having a circular cross section are arranged on a diagonal line in a portion of 3 x 3 matrix at the center of the fuel assembly, and two fuel rods are disposed at vacant spaces, and the number of fuel rods is 74. Eight fuel rods are determined as short fuel rods among 74 fuel rods. Assuming the fuel inventory in the short fuel rod as X(kg), and the fuel inventory in the fuel rods other than the short fuel rods as Y(kg), X and Y satisfy the relation: X + Y ≥ 173m, Y ≤ - 9.7X + 292, Y ≤ - 0.3X + 203 and X > 0. Then, even when the short fuel rods are used, the fuel inventory is increased and fuel economy can be improved. (I.N.)

Fuel assemblies

International Nuclear Information System (INIS)

Mukai, Hideyuki

1987-01-01

Purpose: To prevent bending of fuel rods caused by the difference of irradiation growth between coupling fuel rods and standards fuel rods thereby maintain the fuel rod integrity. Constitution: The f value for a fuel can (the ratio of pole of zirconium crystals in the entire crystals along the axial direction of the fuel can) of a coupling fuel rod secured by upper and lower tie plates is made smaller than the f value for the fuel can of a standard fuel rod not secured by the upper and the lower tie plates. This can make the irradiation growth of the fuel can of the coupling fuel rod greater than the irradiation growth of the fuel can of the standard fuel rod and, accordingly, since the elongation of the standard fuel rod can always by made greater, bending of the standard fuel rod can be prevented. (Yoshihara, M.)

Features of fuel performance at high fuel burnups

International Nuclear Information System (INIS)

Proselkov, V.N.; Scheglov, A.S.; Smirnov, A.V.; Smirnov, V.P.

2001-01-01

Some features of fuel behavior at high fuel burnups, in particular, initiation and development of rim-layer, increase in the rate of fission gas release from the fuel and increase in the inner gas pressure in the fuel rod are briefly described. Basing on the analysis of the data of post-irradiation examinations of fuel rods of WWER-440 working FA and CR fuel followers, that have been operated for five fuel cycles and got the average fuel burnup or varies as 50MW-day/kgU, a conclusion is made that the WWER-440 fuel burnup can be increased at least to average burnups of 55-58 MW-day/kgU per fuel assembly (Authors)

Fuel Handbook[Wood and other renewable fuels

Energy Technology Data Exchange (ETDEWEB)

Stroemberg, Birgitta [TPS Termiska Processer AB, Nykoeping (SE)] (ed.)

2006-03-15

This handbook on renewable fuels is intended for power and heat producers in Sweden. This fuel handbook provides, from a plant owner's perspective, a method to evaluate different fuels on the market. The fuel handbook concerns renewable fuels (but does not include household waste) that are available on the Swedish market today or fuels that have potential to be available within the next ten years. The handbook covers 26 different fuels. Analysis data, special properties, operating experiences and literature references are outlined for each fuel. [Special properties, operating experiences and literature references are not included in this English version] The handbook also contains: A proposed methodology for introduction of new fuels. A recommendation of analyses and tests to perform in order to reduce the risk of problems is presented. [The recommendation of analyses and tests is not included in the English version] A summary of relevant laws and taxes for energy production, with references to relevant documentation. [Only laws and taxes regarding EU are included] Theory and background to evaluate a fuel with respect to combustion, ash and corrosion properties and methods that can be used for such evaluations. Summary of standards, databases and handbooks on biomass fuels and other solid fuels, and links to web sites where further information about the fuels can be found. The appendices includes: A methodology for trial firing of fuels. Calculations procedures for, amongst others, heating value, flue gas composition, key number and free fall velocity [Free fall velocity is not included in the English version]. In addition, conversion routines between different units for a number of different applications are provided. Fuel analyses are presented in the appendix. (The report is a translation of parts of the report VARMEFORSK--911 published in 2005)

Benefits of barrier fuel on fuel cycle economics

International Nuclear Information System (INIS)

Crowther, R.L.; Kunz, C.L.

1988-01-01

Barrier fuel rod cladding was developed to eliminate fuel rod failures from pellet/cladding stress/corrosion interaction and to eliminate the associated need to restrict the rate at which fuel rod power can be increased. The performance of barrier cladding has been demonstrated through extensive testing and through production application to many boiling water reactors (BWRs). Power reactor data have shown that barrier fuel rod cladding has a significant beneficial effect on plant capacity factor and plant operating costs and significantly increases fuel reliability. Independent of the fuel reliability benefit, it is less obvious that barrier fuel has a beneficial effect of fuel cycle costs, since barrier cladding is more costly to fabricate. Evaluations, measurements, and development activities, however, have shown that the fuel cycle cost benefits of barrier fuel are large. This paper is a summary of development activities that have shown that application of barrier fuel significantly reduces BWR fuel cycle costs

Two Single-Nucleotide Polymorphisms in ADAM12 Gene Are Associated with Early and Late Radiographic Knee Osteoarthritis in Estonian Population

Directory of Open Access Journals (Sweden)

Irina Kerna

2013-01-01

Full Text Available Objectives. To investigate associations of selected single-nucleotide polymorphisms (SNPs in ADAM12 gene with radiographic knee osteoarthritis (rKOA in Estonian population. Methods. The rs3740199, rs1871054, rs1278279, and rs1044122 SNPs in ADAM12 gene were genotyped in 438 subjects (303 women from population-based cohort, aged 32 to 57 (mean 45.4. The rKOA features were evaluated in the tibiofemoral joint (TFJ and patellofemoral joint. Results. The early rKOA was found in 51.4% of investigated subjects (72% women and 12.3% of participants (63% women had advanced stage of diseases. The A allele of synonymous SNP rs1044122 was associated with early rKOA in TFJ, predominantly with the presence of osteophytes in females (OR 1.57; 95% CI 1.08–2.29, . The C allele of intron polymorphism rs1871054 carried risk for advanced rKOA, mostly to osteophyte formation in TFJ in males (OR 3.03; 95% CI 1.11–7.53, . Also the CCAA haplotype of ADAM12 was associated with osteophytosis, again mostly in TFJ in males (. For rs3740199 and rs1278279, no statistically significant associations were observed. Conclusion.  ADAM12 gene variants are related to rKOA risk during the early and late stages of diseases. The genetic risk seems to be predominantly associated with the appearance of osteophytes—a marker of bone remodelling and neochondrogenesis.

Fuel assembly

International Nuclear Information System (INIS)

Yamazaki, Hajime.

1995-01-01

In a fuel assembly having fuel rods of different length, fuel pellets of mixed oxides of uranium and plutonium are loaded to a short fuel rod. The volume ratio of a pellet-loaded portion to a plenum portion of the short fuel rod is made greater than the volume ratio of a fuel rod to which uranium fuel pellets are loaded. In addition, the volume of the plenum portion of the short fuel rod is set greater depending on the plutonium content in the loaded fuel pellets. MOX fuel pellets are loaded on the short fuel rods having a greater degree of freedom relevant to the setting for the volume of the plenum portion compared with that of a long rod fuel, and the volume of the plenum portion is ensured greater depending on the plutonium content. Even if a large amount of FP gas and He gas are discharged from the MOX fuels compared with that from the uranium fuels, the internal pressure of the MOX fuel rod during operation is maintained substantially identical with that of the uranium fuel rod, so that a risk of generating excess stresses applied to the fuel cladding tubes and rupture of fuels are greatly reduced. (N.H.)

Framing car fuel efficiency : linearity heuristic for fuel consumption and fuel-efficiency ratings

NARCIS (Netherlands)

Schouten, T.M.; Bolderdijk, J.W.; Steg, L.

2014-01-01

People are sensitive to the way information on fuel efficiency is conveyed. When the fuel efficiency of cars is framed in terms of fuel per distance (FPD; e.g. l/100 km), instead of distance per units of fuel (DPF; e.g. km/l), people have a more accurate perception of potential fuel savings. People

Kunda puitmassitehase ehitus võib alata / Toivo Tänavsuu

Index Scriptorium Estoniae

Tänavsuu, Toivo

2003-01-01

Norra kapitalil põhineval firmal Estonian Cell on kõik load Kundasse haavapuitmassitehase rajamiseks. Ehitus algab 2004. aasta alguses, selle kestuseks on planeeritud poolteist aastat. Lisa: Estonian Cell

Used fuel packing plant for CANDU fuel

Energy Technology Data Exchange (ETDEWEB)

Menzies, I.; Thayer, B.; Bains, N., E-mail: imenzies@atsautomation.com [ATS Automation, Cambridge, ON (Canada); Murchison, A., E-mail: amurchison@nwmo.ca [NWMO, Toronto, ON (Canada)

2015-07-01

Large forgings have been selected to containerize Light Water Reactor used nuclear fuel. CANDU fuel, which is significantly smaller in size, allows novel approaches for containerization. For example, by utilizing commercially available extruded ASME pipe a conceptual design of a Used Fuel Packing Plant for containerization of used CANDU fuel in a long lived metallic container has been developed. The design adopts a modular approach with multiple independent work cells to transfer and containerize the used fuel. Based on current technologies and concepts from proven industrial systems, the Used Fuel Packing Plant can assemble twelve used fuel containers per day considering conservative levels of process availability. (author)

Fuel assembly

International Nuclear Information System (INIS)

Sakuyama, Tadashi; Mukai, Hideyuki.

1988-01-01

Purpose: To prevent the bending of a fuel rod caused by the difference in the elongation between a joined fuel rod and a standard fuel rod thereby maintain the fuel rod integrity. Constitution: A joined fuel rod is in a thread engagement at its lower end plug thereof with a lower plate, while passed through at its upper end plug into an upper tie plate and secured with a nut. Further, a standard fuel rod is engaged at its upper end plug and lower end plug with the upper tie plate and the lower tie plate respectively. Expansion springs are mounted to the upper end plugs of these bonded fuel rods and the standard fuel rods for preventing this lifting. Each of the fuel rods comprises a plurality of sintered pellets of nuclear fuel materials laminated in a zircaloy fuel can. The content of the alloy ingredient in the fuel can of the bonded fuel rod is made greater than that of the alloy ingredient of the standard fuel rod. this can increase the elongation for the bonded fuel rod, and the spring of the standard fuel rod is tightly bonded to prevent the bending. (Yoshino, Y.)

Fuel performance of DOE fuels in water storage

International Nuclear Information System (INIS)

Hoskins, A.P.; Scott, J.G.; Shelton-Davis, C.V.; McDannel, G.E.

1993-01-01

Westinghouse Idaho Nuclear Company operates the Idaho Chemical Processing Plant (ICPP) at the Idaho National Engineering Laboratory. In April of 1992, the U.S. Department of Energy (DOE) decided to end the fuel reprocessing mission at ICPP. Fuel performance in storage received increased emphasis as the fuel now needs to be stored until final dispositioning is defined and implemented. Fuels are stored in four main areas: an original underwater storage facility, a modern underwater storage facility, and two dry fuel storage facilities. As a result of the reactor research mission of the DOE and predecessor agencies, the Energy Research and Development Administration and the Atomic Energy Commission, many types of nuclear fuel have been developed, used, and assigned to storage at the ICPP. Fuel clad with stainless steel, zirconium, aluminum, and graphite are represented. Fuel matrices include uranium oxide, hydride, carbide, metal, and alloy fuels, resulting in 55 different fuel types in storage. Also included in the fuel storage inventory is canned scrap material

Smoking prevalence and attitudes towards smoking among Estonian physicians: results from cross-sectional studies in 2002 and 2014.

Science.gov (United States)

Põld, Mariliis; Pärna, Kersti

2017-11-25

To explore smoking prevalence and attitudes towards smoking among Estonian physicians in 2002 and 2014. Two self-administered cross-sectional postal surveys were conducted among practising physicians in Estonia. Initial sample consisted of all practising physicians in Estonia. The corrected response rate was 67.8% in 2002 and 53.1% in 2014. Present study sample was restricted to physicians younger than 65 years (n=2549 in 2002, n=2339 in 2014). Age-standardised prevalence of smoking and prevalence of agreement with seven statements concerning attitudes towards smoking was determined. To analyse association of physicians' attitudes towards smoking with study year and smoking status, logistic regression analysis was used. Adjusted ORs of agreement with the seven statements were determined. Corresponding 95% CIs were calculated. The age-standardised prevalence of current smoking among men was 26.8% in 2002 and 15.3% in 2014, among women 10.4% and 5.8%, respectively. Compared with the year 2002, in 2014, prevalence of agreement with statements declaring harmfulness of smoking was higher and prevalence of agreement with statements approving smoking was lower. Adjusted ORs showed that compared with 2002, physicians' attitudes towards smoking were less favourable in 2014, and physicians' attitudes towards smoking were associated with their smoking status. Compared with 2002, the age-standardised smoking prevalence among male and female physicians was lower, and attitudes towards smoking were less approving in 2014. The smoking physicians had more approving attitudes towards smoking than their non-smoking colleagues. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Fuel Supply Defaults for Regional Fuels and Fuel Wizard Tool in MOVES201X

Science.gov (United States)

The fuel supply report documents the data and methodology used to derive the default gasoline, diesel and fuel-blend fuel properties, and their respective fuel market share in MOVES. The default market share of the individual fuels varies by calendar year, seasons, and several do...

Postmodernistlikke jooni eesti noore režissuuri lavastustes 1969–1975 / Postmodernist Traits in the Performances of Young Estonian Directors 1969-1975

Directory of Open Access Journals (Sweden)

Rein Heinsalu

2015-06-01

Full Text Available Teesid: 1960. aastate lõpus toimusid eesti teatris suured muutused. Ilmus nähtus, mida hakati nimetama nooreks režissuuriks. Eeskätt on see seotud Evald Hermaküla, Jaan Toominga, Kalju Komissarovi, Kaarin Raidi jt nimedega. Noor režissuur tõstis mässu ahtaks muutunud realismi raamide vastu, mis ei vastanud noore põlvkonna teatriootustele. Olles mõjutatud ideeliselt radikaalsest eksperimentaalteatrist USAs, aga ka Jerzy Grotowski katsetustest ning teistest avangardsetest liikumistest, muutis see füüsilist teatrikeelt. Tõusis improvisatsiooni osakaal. Teater lakkas olemast dramaturgiliste tekstide esituskoht, vaid hakkas otsima etendustes vahetut kohalolu. Tajuprotsessi hakkas juhtima mängu põhimõte. Suured müüdid dekonstrueeriti, autoritaarsusele vastanduti. Seksuaalsus ilmutas end uuel jõul, toetatud alateadvuse impulssidest. Uue laine radikaalsus kestis 1970. aastate lõpuni, mil see sulandus peavoolu. Murrang teatriesteetikas mõjutas kogu järgnenud teatriperioodi, seda on kutsutud ka eesti teatri kuldajaks. SU M M A R Y Young directors emerged in Estonian theatre at the end of the 1960s. More specifically, during the years 1969–1974 many new directors’ names appeared on theatre posters, and the fundamental changes in the language and content of the theatre at the end of the 1960s and the 1970s began to be associated with these names. Most important among these are Evald Hermaküla, Jaan Tooming, Kalju Komissarov, and Karin Raid. Within a short time these young directors changed prevailing assumptions about the purpose, means, and content of the theatre in Estonia. This phenomenon came to be referred to as the breakthrough, or the new wave; later on, in sum, as the renewal of theatre. A generational change was taking place in the theatre, and in this framework a different language of theatre emerged, which began carrying innovative emotional and aesthetic paradigms. As in the Anglo-American cultural space, this new

78 FR 12005 - Regulation of Fuels and Fuel Additives: 2013 Renewable Fuel Standards; Public Hearing

Science.gov (United States)

2013-02-21

... Regulation of Fuels and Fuel Additives: 2013 Renewable Fuel Standards; Public Hearing AGENCY: Environmental... EPA is announcing a public hearing to be held for the proposed rule ``Regulation of Fuels and Fuel Additives: 2013 Renewable Fuel Standards,'' which was published separately in the Federal Register on...

Solid TRU fuels and fuel cycle technology

International Nuclear Information System (INIS)

Ogawa, Toru; Suzuki, Yasufumi

1997-01-01

Alloys and nitrides are candidate solid fuels for transmutation. However, the nitride fuels are preferred to the alloys because they have more favorable thermal properties which allows to apply a cold-fuel concept. The nitride fuel cycle technology is briefly presented

Nuclear fuels

International Nuclear Information System (INIS)

Beauvy, M.; Berthoud, G.; Defranceschi, M.; Ducros, G.; Guerin, Y.; Limoge, Y.; Madic, Ch.; Santarini, G.; Seiler, J.M.; Sollogoub, P.; Vernaz, E.; Guillet, J.L.; Ballagny, A.; Bechade, J.L.; Bonin, B.; Brachet, J.Ch.; Delpech, M.; Dubois, S.; Ferry, C.; Freyss, M.; Gilbon, D.; Grouiller, J.P.; Iracane, D.; Lansiart, S.; Lemoine, P.; Lenain, R.; Marsault, Ph.; Michel, B.; Noirot, J.; Parrat, D.; Pelletier, M.; Perrais, Ch.; Phelip, M.; Pillon, S.; Poinssot, Ch.; Vallory, J.; Valot, C.; Pradel, Ph.; Bonin, B.; Bouquin, B.; Dozol, M.; Lecomte, M.; Vallee, A.; Bazile, F.; Parisot, J.F.; Finot, P.; Roberts, J.F.

2009-01-01

Fuel is one of the essential components in a reactor. It is within that fuel that nuclear reactions take place, i.e. fission of heavy atoms, uranium and plutonium. Fuel is at the core of the reactor, but equally at the core of the nuclear system as a whole. Fuel design and properties influence reactor behavior, performance, and safety. Even though it only accounts for a small part of the cost per kilowatt-hour of power provided by current nuclear power plants, good utilization of fuel is a major economic issue. Major advances have yet to be achieved, to ensure longer in-reactor dwell-time, thus enabling fuel to yield more energy; and improve ruggedness. Aside from economics, and safety, such strategic issues as use of plutonium, conservation of resources, and nuclear waste management have to be addressed, and true technological challenges arise. This Monograph surveys current knowledge regarding in-reactor behavior, operating limits, and avenues for R and D. It also provides illustrations of ongoing research work, setting out a few noteworthy results recently achieved. Content: 1 - Introduction; 2 - Water reactor fuel: What are the features of water reactor fuel? 9 (What is the purpose of a nuclear fuel?, Ceramic fuel, Fuel rods, PWR fuel assemblies, BWR fuel assemblies); Fabrication of water reactor fuels (Fabrication of UO 2 pellets, Fabrication of MOX (mixed uranium-plutonium oxide) pellets, Fabrication of claddings); In-reactor behavior of UO 2 and MOX fuels (Irradiation conditions during nominal operation, Heat generation, and removal, The processes involved at the start of irradiation, Fission gas behavior, Microstructural changes); Water reactor fuel behavior in loss of tightness conditions (Cladding, the first containment barrier, Causes of failure, Consequences of a failure); Microscopic morphology of fuel ceramic and its evolution under irradiation; Migration and localization of fission products in UOX and MOX matrices (The ceramic under irradiation

Nuclear fuels

Energy Technology Data Exchange (ETDEWEB)

Beauvy, M.; Berthoud, G.; Defranceschi, M.; Ducros, G.; Guerin, Y.; Limoge, Y.; Madic, Ch.; Santarini, G.; Seiler, J.M.; Sollogoub, P.; Vernaz, E.; Guillet, J.L.; Ballagny, A.; Bechade, J.L.; Bonin, B.; Brachet, J.Ch.; Delpech, M.; Dubois, S.; Ferry, C.; Freyss, M.; Gilbon, D.; Grouiller, J.P.; Iracane, D.; Lansiart, S.; Lemoine, P.; Lenain, R.; Marsault, Ph.; Michel, B.; Noirot, J.; Parrat, D.; Pelletier, M.; Perrais, Ch.; Phelip, M.; Pillon, S.; Poinssot, Ch.; Vallory, J.; Valot, C.; Pradel, Ph.; Bonin, B.; Bouquin, B.; Dozol, M.; Lecomte, M.; Vallee, A.; Bazile, F.; Parisot, J.F.; Finot, P.; Roberts, J.F

2009-07-01

Fuel is one of the essential components in a reactor. It is within that fuel that nuclear reactions take place, i.e. fission of heavy atoms, uranium and plutonium. Fuel is at the core of the reactor, but equally at the core of the nuclear system as a whole. Fuel design and properties influence reactor behavior, performance, and safety. Even though it only accounts for a small part of the cost per kilowatt-hour of power provided by current nuclear power plants, good utilization of fuel is a major economic issue. Major advances have yet to be achieved, to ensure longer in-reactor dwell-time, thus enabling fuel to yield more energy; and improve ruggedness. Aside from economics, and safety, such strategic issues as use of plutonium, conservation of resources, and nuclear waste management have to be addressed, and true technological challenges arise. This Monograph surveys current knowledge regarding in-reactor behavior, operating limits, and avenues for R and D. It also provides illustrations of ongoing research work, setting out a few noteworthy results recently achieved. Content: 1 - Introduction; 2 - Water reactor fuel: What are the features of water reactor fuel? 9 (What is the purpose of a nuclear fuel?, Ceramic fuel, Fuel rods, PWR fuel assemblies, BWR fuel assemblies); Fabrication of water reactor fuels (Fabrication of UO{sub 2} pellets, Fabrication of MOX (mixed uranium-plutonium oxide) pellets, Fabrication of claddings); In-reactor behavior of UO{sub 2} and MOX fuels (Irradiation conditions during nominal operation, Heat generation, and removal, The processes involved at the start of irradiation, Fission gas behavior, Microstructural changes); Water reactor fuel behavior in loss of tightness conditions (Cladding, the first containment barrier, Causes of failure, Consequences of a failure); Microscopic morphology of fuel ceramic and its evolution under irradiation; Migration and localization of fission products in UOX and MOX matrices (The ceramic under

Fuel economy of hybrid fuel-cell vehicles

Science.gov (United States)

Ahluwalia, Rajesh K.; Wang, X.; Rousseau, A.

The potential improvement in fuel economy of a mid-size fuel-cell vehicle by combining it with an energy storage system has been assessed. An energy management strategy is developed and used to operate the direct hydrogen, pressurized fuel-cell system in a load-following mode and the energy storage system in a charge-sustaining mode. The strategy places highest priority on maintaining the energy storage system in a state where it can supply unanticipated boost power when the fuel-cell system alone cannot meet the power demand. It is found that downsizing a fuel-cell system decreases its efficiency on a drive cycle which is compensated by partial regenerative capture of braking energy. On a highway cycle with limited braking energy the increase in fuel economy with hybridization is small but on the stop-and-go urban cycle the fuel economy can improve by 27%. On the combined highway and urban drive cycles the fuel economy of the fuel-cell vehicle is estimated to increase by up to 15% by hybridizing it with an energy storage system.

Ammonia as a Suitable Fuel for Fuel Cells

International Nuclear Information System (INIS)

Lan, Rong; Tao, Shanwen

2014-01-01

Ammonia, an important basic chemical, is produced at a scale of 150 million tons per year. Half of hydrogen produced in chemical industry is used for ammonia production. Ammonia containing 17.5 wt% hydrogen is an ideal carbon-free fuel for fuel cells. Compared to hydrogen, ammonia has many advantages. In this mini-review, the suitability of ammonia as fuel for fuel cells, the development of different types of fuel cells using ammonia as the fuel and the potential applications of ammonia fuel cells are briefly reviewed.

Koolutatud kirjanduslugu / Jaan Puhvel

Index Scriptorium Estoniae

Puhvel, Jaan, 1932-

2007-01-01

Arvustus: Nirk, Endel. Estonian literature : historical survey with bibliographical application / [translated from Estonian by A. Hone, O. Mutt]. Tallinn : Perioodika, 1970. Ilmunud: Books Abroad, 1972, nr. 46, lk. 142-144, pealkirjata

Uurimistöö-kompvek sugupuu-uurijale / Uno Schultz

Index Scriptorium Estoniae

Schultz, Uno, 1956-

2002-01-01

rets. rmt.: Maldonado, Sigrid Renate. Estonian experience and roots: ethnic Estonian genealogy with historical perspective, social influences and possible family history resources. Fort Wayne (USA) : AS WAS Publishing, 1996. 120 p.

Ammonia as a suitable fuel for fuel cells

Directory of Open Access Journals (Sweden)

Rong eLan

2014-08-01

Full Text Available Ammonia, an important basic chemical, is produced at a scale of 150 million tons per year. Half of hydrogen produced in chemical industry is used for ammonia production. Ammonia containing 17.5wt% hydrogen is an ideal carbon-free fuel for fuel cells. Compared to hydrogen, ammonia has many advantages. In this mini-review, the suitability of ammonia as fuel for fuel cells, the development of different types of fuel cells using ammonia as the fuel and the potential applications of ammonia fuel cells are briefly reviewed.

Safety analysis of MOX fuels by fuel performance code

Energy Technology Data Exchange (ETDEWEB)

Suzuki, Motoe [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2002-12-01

Performance of plutonium rick mixed oxide fuels specified for the Reduced-Moderation Water Reactor (RMWR) has been analysed by modified fuel performance code. Thermodynamic properties of these fuels up to 120 GWd/t burnup have not been measured and estimated using existing uranium fuel models. Fission product release, pressure rise inside fuel rods and mechanical loads of fuel cans due to internal pressure have been preliminarily assessed based on assumed axial power distribution history, which show the integrity of fuel performance. Detailed evaluation of fuel-cladding interactions due to thermal expansion or swelling of fuel pellets due to high burnup will be required for safety analysis of mixed oxide fuels. Thermal conductivity and swelling of plutonium rich mixed oxide fuels shall be taken into consideration. (T. Tanaka)

Reactor fuel element and fuel assembly

International Nuclear Information System (INIS)

Okada, Seiji; Ishida, Tsuyoshi; Ikeda, Atsuko.

1997-01-01

A mixture of fission products and burnable poisons is disposed at least to a portion between MOX pellets to form a burnable poison-incorporated fuel element without mixing burnable poisons to the MOX pellets. Alternatively, a mixture of materials other than the fission products and burnable poisons is formed into disks, a fuel lamination portion is divided into at least to two regions, and the ratio of number of the disks of the mixture relative to the volume of the region is increased toward the lower portion of the fuel lamination portion. With such a constitution, the axial power distribution of fuels can be made flat easily. Alternatively, the thickness of the disk of the mixture is increased toward the lower region of the fuel lamination portion to flatten the axial power distribution of the fuels in the same manner easily. The time and the cost required for the manufacture are reduced, and MOX fuels filled with burnable poisons with easy maintenance and control can be realized. (N.H.)

Emergency fuels utilization guidebook. Alternative Fuels Utilization Program

Energy Technology Data Exchange (ETDEWEB)

1980-08-01

The basic concept of an emergency fuel is to safely and effectively use blends of specification fuels and hydrocarbon liquids which are free in the sense that they have been commandeered or volunteered from lower priority uses to provide critical transportation services for short-duration emergencies on the order of weeks, or perhaps months. A wide variety of liquid hydrocarbons not normally used as fuels for internal combustion engines have been categorized generically, including limited information on physical characteristics and chemical composition which might prove useful and instructive to fleet operators. Fuels covered are: gasoline and diesel fuel; alcohols; solvents; jet fuels; kerosene; heating oils; residual fuels; crude oils; vegetable oils; gaseous fuels.

District heating and combined heat and power generation from biomass

International Nuclear Information System (INIS)

Veski, Rein

1999-01-01

An Altener programme seminar District Heating and Combined Heat and Power Generation from Biomass. Minitraining seminar and study tours and also Business forum, Exhibition and Short company presentations were held in Tallinn on March 21-23, 1999. The Seminar was organised by the VTT Energy, the Estonian Bioenergy Association and the Estonian Heat and Power Association in co-operation with the AFB-net. The Agricultural and Forestry Biomass Network (AFB-net) is part of the ALTENER programme. The Network aims at promoting and stimulating the implementation and commercial utilisation of energy from biomass and waste, through the initiation of business opportunities. This includes national and international co-operation and the exchange of the personnel. The Seminar was attended by consulting companies, scientists, municipal authorities and representatives of co-ordinating bodies engaged in renewable energy management as well as DH and CHP plant managers, equipment manufacturers and local energy planners from Finland, Estonia, Latvia, Lithuania, Sweden, Denmark, Belgium, Slovenia and Slovak Republic. At the Seminar minitraining issues were dealt with: the current situation and future trends in biomass DH in the Baltic Sea countries, and biomass DH and CHP in Eastern and Central Europe, planning and construction of biomass-based DH plants, biomass fuel procurement and handling technology, combustion technology, DH networks, financing of biomass projects and evaluating of projects, and case projects in Eastern and Central European countries. The following were presented: boilers with a capacity of 100 kW or more, stoker burners, wood and straw handling equipment, wood fuel harvesters, choppers, pelletisers, district heating pipelines and networks. (author)

77 FR 13009 - Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel...

Science.gov (United States)

2012-03-05

... Regulation of Fuels and Fuel Additives: Identification of Additional Qualifying Renewable Fuel Pathways Under the Renewable Fuel Standard Program AGENCY: Environmental Protection Agency (EPA). ACTION: Withdrawal... Renewable Fuel Standard program regulations. Because EPA received adverse comment, we are withdrawing the...

Nuclear fuels

International Nuclear Information System (INIS)

2008-01-01

The nuclear fuel is one of the key component of a nuclear reactor. Inside it, the fission reactions of heavy atoms, uranium and plutonium, take place. It is located in the core of the reactor, but also in the core of the whole nuclear system. Its design and properties influence the behaviour, the efficiency and the safety of the reactor. Even if it represents a weak share of the generated electricity cost, its proper use represents an important economic stake. Important improvements remain to be made to increase its residence time inside the reactor, to supply more energy, and to improve its robustness. Beyond the economical and safety considerations, strategical questions have to find an answer, like the use of plutonium, the management of resources and the management of nuclear wastes and real technological challenges have to be taken up. This monograph summarizes the existing knowledge about the nuclear fuel, its behaviour inside the reactor, its limits of use, and its R and D tracks. It illustrates also the researches in progress and presents some key results obtained recently. Content: 1 - Introduction; 2 - The fuel of water-cooled reactors: aspect, fabrication, behaviour of UO 2 and MOX fuels inside the reactor, behaviour in loss of tightness situation, microscopic morphology of fuel ceramics and evolution under irradiation - migration and localisation of fission products in UOX and MOX matrices, modeling of fuels behaviour - modeling of defects and fission products in the UO 2 ceramics by ab initio calculations, cladding and assembly materials, pellet-cladding interaction, advanced UO 2 and MOX ceramics, mechanical behaviour of the fuel assembly, fuel during a loss of coolant accident, fuel during a reactivity accident, fuel during a serious accident, fuel management inside reactor cores, fuel cycle materials balance, long-term behaviour of the spent fuel, fuel of boiling water reactors; 3 - the fuel of liquid metal fast reactors: fast neutrons radiation

Apparatus for loading fuel pellets in fuel rods

International Nuclear Information System (INIS)

Tedesco, R.J.

1976-01-01

An apparatus is disclosed for loading fuel pellets into fuel rods for a nuclear reactor including a base supporting a table having grooves therein for holding a multiplicity of pellets. Multiple fuel rods are placed in alignment with grooves in the pellet table and a guide member channels pellets from the table into the corresponding fuel rods. To effect movement of pellets inside the fuel rods without jamming, a number of electromechanical devices mounted on the base have arms connected to the lower surface of the fuel rod table which cyclically imparts a reciprocating arc motion to the table for moving the fuel pellets longitudinally of and inside the fuel rods. These electromechanical devices include a solenoid having a plunger therein connected to a leaf type spring, the arrangement being such that upon energization of the solenoid coil, the leaf spring moves the fuel rod table rearwardly and downwardly, and upon deenergization of the coil, the spring imparts an upward-forward movement to the table which results in physical displacement of fuel pellets in the fuel rods clamped to the table surface. 8 claims, 6 drawing figures

Hardened over-coating fuel particle and manufacture of nuclear fuel using its fuel particle

International Nuclear Information System (INIS)

Yoshimuda, Hideharu.

1990-01-01

Coated-fuel particles comprise a coating layer formed by coating ceramics such as silicon carbide or zirconium carbide and carbons, etc. to a fuel core made of nuclear fuel materials. The fuel core generally includes oxide particles such as uranium, thorium and plutonium, having 400 to 600 μm of average grain size. The average grain size of the coated-fuel particle is usually from 800 to 900 μm. The thickness of the coating layer is usually from 150 to 250 μm. Matrix material comprising a powdery graphite and a thermosetting resin such as phenol resin, etc. is overcoated to the surface of the coated-fuel particle and hardened under heating to form a hardened overcoating layer to the coated-fuel particle. If such coated-fuel particles are used, cracks, etc. are less caused to the coating layer of the coated-fuel particles upon production, thereby enabling to prevent the damages to the coating layer. (T.M.)

Fuel and fuel cycles with high burnup for WWER reactors

International Nuclear Information System (INIS)

Chernushev, V.; Sokolov, F.

2002-01-01

The paper discusses the status and trends in development of nuclear fuel and fuel cycles for WWER reactors. Parameters and main stages of implementation of new fuel cycles will be presented. At present, these new fuel cycles are offered to NPPs. Development of new fuel and fuel cycles based on the following principles: profiling fuel enrichment in a cross section of fuel assemblies; increase of average fuel enrichment in fuel assemblies; use of refuelling schemes with lower neutron leakage ('in-in-out'); use of integrated fuel gadolinium-based burnable absorber (for a five-year fuel cycle); increase of fuel burnup in fuel assemblies; improving the neutron balance by using structural materials with low neutron absorption; use of zirconium alloy claddings which are highly resistant to irradiation and corrosion. The paper also presents the results of fuel operation. (author)

Fuel Cell Power Plants Renewable and Waste Fuels

Science.gov (United States)

2011-01-13

logo, Direct FuelCell and “DFC” are all registered trademarks (®) of FuelCell Energy, Inc. Applications •On-site self generation of combined heat... of FuelCell Energy, Inc. Fuels Resources for DFC • Natural Gas and LNG • Propane • Biogas (by Anaerobicnaerobic Digestion) - Municipal Waste...FUEL RESOURCES z NATURAL GAS z PROPANE z DFC H2 (50-60%) z ETHANOL zWASTE METHANE z BIOGAS z COAL GAS Diversity of Fuels plus High Efficiency

Veelahkme väljapurse / Jaan Puhvel

Index Scriptorium Estoniae

Puhvel, Jaan, 1932-

2007-01-01

Arvustus: Nirk, Endel. Estonian literature : historical survey with bibliographical application / [translated from Estonian by A. Hone, O. Mutt]. Tallinn : Perioodika, 1987. Ilmunud: Los Angeles Times Book Review 19. II 1989, lk. 2, pealkirjata

Noor-Eesti tähendust otsides: vanu ja uusi mõtteid. In Quest of the Meaning of Young Estonia: Old and New Reflections

Directory of Open Access Journals (Sweden)

Jüri Kivimäe

2012-04-01

Full Text Available As an important chapter of Estonian literary history, Young Estonia has been relatively well researched and interpreted. However, its influence as a cultural and intellectual movement in Estonian society in the opening decades of the last century requires further study and verification. What stands reflected in Young Estonia is actually a larger groundswell of history, along with a rupture that took place throughout Estonian society in the course of its modernization. Discussions of the meaning of Young Estonia must therefore concern themselves with literary discourse, but much more so with what transpired outside the boundaries of literary pursuits, in the contexts of social and political history and the history of ideas. In view of historiography, there is no consensus on the definition of Young Estonia: it has been referred to as a movement, a group, or a cluster of seminal ideas. The founding of the group is generally located at the publication of the first Young Estonia album near the high tide of the Russian Revolution of 1905. Young Estonia disintegrated during the First World War, with its ending marked both by the publication of the fifth and final album in 1915 and by the journal Vaba Sõna (Free Word, which carried on the ideology of Young Estonia in the years 1914–1916. Although there are strong parallels between Young Estonia and similar movements and associations in Western and Central Europe in the nineteenth century, the greatest influence being exerted by the politicalliterary movement Nuori-Suomi (Young Finland, the respective group in Estonia was largely autochthonic in its time and milieu. In the rhetoric of the era of national awakening, Baltic Germans referred to Estonian national activists as ”Young Estonians”; the term was also under discussion in the Estonian press, yet there is no direct conceptual connection between this polemic and Young Estonia as a group. The Young Estonia group was mostly composed of young

Fuel-cycle cost comparisons with oxide and silicide fuels

International Nuclear Information System (INIS)

Matos, J.E.; Freese, K.E.

1982-01-01

This paper addresses fuel cycle cost comparisons for a generic 10 MW reactor with HEU aluminide fuel and with LEU oxide and silicide fuels in several fuel element geometries. The intention of this study is to provide a consistent assessment of various design options from a cost point of view. Fuel cycle cost benefits could result if a number of reactors were to utilize fuel elements with the same number or different numbers of the same standard fuel plate. Data are presented to quantify these potential cost benefits. This analysis shows that there are a number of fuel element designs using LEU oxide or silicide fuels that have either the same or lower total fuel cycle costs than the HEU design. Use of these fuels with the uranium densities considered requires that they are successfully demonstrated and licensed

Fuel temperature characteristics of the 37-element and CANFLEX fuel bundle

International Nuclear Information System (INIS)

Bae, Jun Ho; Rho, Gyu Hong; Park, Joo Hwan

2009-10-01

This report describes the fuel temperature characteristics of CANFLEX fuel bundles and 37-element fuel bundles for a different burnup of fuel. The program was consisted for seeking the fuel temperature of fuel bundles of CANFLEX fuel bundles and 37-element fuel bundles by using the method in NUCIRC. Fuel temperature has an increasing pattern with the burnup of fuel for CANFLEX fuel bundles and 37-element fuel bundles. For all the case of burnup, the fuel temperature of CANFLEX fuel bundles has a lower value than that of 37-element fuel bundles. Especially, for the high power channel, the CANFLEX fuel bundles show a lower fuel temperature as much as about 75 degree, and the core averaged fuel temperature has a lower fuel temperature of about 50 degree than that of 37-element fuel bundles. The lower fuel temperature of CANFLEX fuel bundles is expected to enhance the safety by reducing the fuel temperature coefficient. Finally, for each burnup of CANFLEX fuel bundles and 37-element fuel bundles, the equation was present for predicting the fuel temperature of a bundle in terms of a coolant temperature and bundle power

Nuclear fuels

International Nuclear Information System (INIS)

Gangwani, Saloni; Chakrabortty, Sumita

2011-01-01

Nuclear fuel is a material that can be consumed to derive nuclear energy, by analogy to chemical fuel that is burned for energy. Nuclear fuels are the most dense sources of energy available. Nuclear fuel in a nuclear fuel cycle can refer to the fuel itself, or to physical objects (for example bundles composed of fuel rods) composed of the fuel material, mixed with structural, neutron moderating, or neutron reflecting materials. Long-lived radioactive waste from the back end of the fuel cycle is especially relevant when designing a complete waste management plan for SNF. When looking at long-term radioactive decay, the actinides in the SNF have a significant influence due to their characteristically long half-lives. Depending on what a nuclear reactor is fueled with, the actinide composition in the SNF will be different. The following paper will also include the uses. advancements, advantages, disadvantages, various processes and behavior of nuclear fuels

Intriigid, provokatsioonid ja iseseisvuse sünd: Eesti välisdelegatsioon ja Aleksander Kesküla

OpenAIRE

Kuldkepp, M.

2013-01-01

Intrigue, provocation, and the birth of independence: the Estonian foreign delegation and Aleksander Kesküla This article is an account of the relations between two groups working in Scandinavia in 1918 in order to attain foreign recognition of Estonian independence. The first of these was the official Estonian foreign delegation, headed by Jaan Tõnisson, which began its work in February 1918. The other group consisted for the most part of a single person: the emigré adventurer and self-s...

Checklist for transition to new highway fuel(s).

Energy Technology Data Exchange (ETDEWEB)

Risch, C.; Santini, D.J. (Energy Systems)

2011-12-15

Transportation is vital to the U.S. economy and society. As such, U.S. Presidents have repeatedly stated that the nation needs to reduce dependence on petroleum, especially for the highway transportation sector. Throughout history, highway transportation fuel transitions have been completed successfully both in United States and abroad. Other attempts have failed, as described in Appendix A: Historical Highway Fuel Transitions. Planning for a transition is critical because the changes can affect our nation's ability to compete in the world market. A transition will take many years to complete. While it is tempting to make quick decisions about the new fuel(s) of choice, it is preferable and necessary to analyze all the pertinent criteria to ensure that correct decisions are made. Doing so will reduce the number of changes in highway fuel(s). Obviously, changes may become necessary because of occurrences such as significant technology breakthroughs or major world events. With any and all of the possible transitions to new fuel(s), the total replacement of gasoline and diesel fuels is not expected. These conventional fuels are envisioned to coexist with the new fuel(s) for decades, while the revised fuel and vehicle infrastructures are implemented. The transition process must analyze the needs of the primary 'players,' which consist of the customers, the government, the fuel industry, and the automotive industry. To maximize the probability of future successes, the prime considerations of these groups must be addressed. Section 2 presents a succinct outline of the Checklist. Section 3 provides a brief discussion about the groupings on the Checklist.

75 FR 37733 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

Science.gov (United States)

2010-06-30

... Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program AGENCY... direct final rule to amend the Renewable Fuel Standard program requirements on May 10, 2010. Because EPA... Fuel Standard program requirements, published on May 10, 2010. We stated in that direct final rule that...

77 FR 72746 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard and Diesel...

Science.gov (United States)

2012-12-06

... Fuels and Fuel Additives: Modifications to Renewable Fuel Standard and Diesel Sulfur Programs AGENCY... Fuel Standard (``RFS'') program under section 211(o) of the Clean Air Act. The direct final rule also... marine diesel fuel produced by transmix processors, and the fuel marker requirements for 500 ppm sulfur...

Alternate-Fueled Flight: Halophytes, Algae, Bio-, and Synthetic Fuels

Science.gov (United States)

Hendricks, R. C.

2012-01-01

Synthetic and biomass fueling are now considered to be near-term aviation alternate fueling. The major impediment is a secure sustainable supply of these fuels at reasonable cost. However, biomass fueling raises major concerns related to uses of common food crops and grasses (some also called "weeds") for processing into aviation fuels. These issues are addressed, and then halophytes and algae are shown to be better suited as sources of aerospace fuels and transportation fueling in general. Some of the history related to alternate fuels use is provided as a guideline for current and planned alternate fuels testing (ground and flight) with emphasis on biofuel blends. It is also noted that lessons learned from terrestrial fueling are applicable to space missions. These materials represent an update (to 2009) and additions to the Workshop on Alternate Fueling Sustainable Supply and Halophyte Summit at Twinsburg, Ohio, October 17 to 18, 2007.

Increased fuel burn-up and fuel cycle equilibrium

International Nuclear Information System (INIS)

Debes, M.

2001-01-01

Improvement of nuclear competitiveness will rely mainly on increased fuel performance, with higher burn-up, and reactors sustained life. Regarding spent fuel management, the EDF current policy relies on UO 2 fuel reprocessing (around 850 MTHM/year at La Hague) and MOX recycling to ensure plutonium flux adequacy (around 100 MTHM/year, with an electricity production equivalent to 30 TWh). This policy enables to reuse fuel material, while maintaining global kWh economy with existing facilities. It goes along with current perspective to increase fuel burn-up up to 57 GWday/t mean in 2010. The following presentation describes the consequences of higher fuel burn-up on fuel cycle and waste management and implementation of a long term and global equilibrium for decades in spent fuel management resulting from this strategy. (author)

Estonia

Energy Technology Data Exchange (ETDEWEB)

1999-09-01

The Estonian Country Case Study concentrated on the energy sector. Estonia is in the process of intensive transition from a centrally planned to a market economy. The reforming of the whole economy, included the energy sector, is underway at present in Estonia, therefore the current situation is permanently changing. This in its turn complicates the overall characterisation of the situation and makes it difficult to have well founded basis for furhter forecasts and projections. However, the main lines of further development have been worked out in the governmental document `Long Term Development Plan for the Estonian Fuel and Energy Sector`, which was adopted by the Parliament (Riigikogu) in February 1998. The Estonian Country Case Study team has managed with the complicated task to analyse the most probable GHG mitigation options to be used for the period up till 2035. MARKAL and MARKAL-MACRO models were used to build up the energy system development scenarios and to analyse various GHG mitigation options. Two main scenarios, respectively with low and high GDP growth rates, were assumed for the present analysis. Also the impact of carbon tax on the choice of possible energy generation scenarios was studied with the help of the model. The results have been discussed in the context of future socio-economic and political restrictions. Special attention was paid to the problems and prospects of using Estonian main energy resource - oil shale - for the production of electricity. New combustion technologies developed in Estonia allow reducing CO{sub 2}, SO{sub 2} and NO{sub x} emissions, which makes them highly important in the process of following the binding agreements of international treaties on pollution abatement. The technological mitigation options of GHG emissions have been handled thoroughly, as they are of great interest for Estonia following the requirements of the Kyoto conference. Additionally, renewable energy sources were discussed more thoroughly

High density fuels using dispersion and monolithic fuel

Energy Technology Data Exchange (ETDEWEB)

Gomes, Daniel S.; Silva, Antonio T.; Abe, Alfredo Y.; Muniz, Rafael O.R.; Giovedi, Claudia, E-mail: dsgomes@ipen.br, E-mail: teixeira@ipen.br, E-mail: alfredo@ctmsp.mar.mil.br, E-mail: rafael.orm@gmail.com, E-mail: claudia.giovedi@ctmsp.mar.mil.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Universidade de São Paulo (USP), SP (Brazil). Departamento de Engenharia Naval e Oceânica

2017-07-01

Fuel plates used in high-performance research reactors need to be converted to low-enrichment uranium fuel; the fuel option based on a monolithic formulation requires alloys to contain 6 - 10 wt% Mo. In this case, the fuel plates are composed of the metallic alloy U-10Mo surrounded by a thin zirconium layer encapsulated in aluminum cladding. This study reviewed the physical properties of monolithic forms. The constraints produced during the manufacturing process were analyzed and compared to those of dispersed fuel. The bonding process used for dispersion fuels differs from the techniques applied to foil bonding used for pure alloys. The quality of monolithic plates depends on the fabrication method, which usually involves hot isostatic pressing and the thermal annealing effect of residual stress, which degrades the uranium cubic phase. The preservation of the metastable phase has considerable influence on fuel performance. The physical properties of the foil fuel under irradiation are superior to those of aluminum-dispersed fuels. The fuel meat, using zirconium as the diffusion barrier, prevents the interaction layer from becoming excessively thick. The problem with dispersed fuel is breakaway swelling with a medium fission rate. It has been observed that the fuel dispersed in aluminum was minimized in monolithic forms. The pure alloys exhibited a suitable response from a rate at least twice as much as the fission rate of dispersions. The foils can support fissile material concentration combined with a reduced swelling rate. (author)

High density fuels using dispersion and monolithic fuel

International Nuclear Information System (INIS)

Gomes, Daniel S.; Silva, Antonio T.; Abe, Alfredo Y.; Muniz, Rafael O.R.; Giovedi, Claudia; Universidade de São Paulo

2017-01-01

Fuel plates used in high-performance research reactors need to be converted to low-enrichment uranium fuel; the fuel option based on a monolithic formulation requires alloys to contain 6 - 10 wt% Mo. In this case, the fuel plates are composed of the metallic alloy U-10Mo surrounded by a thin zirconium layer encapsulated in aluminum cladding. This study reviewed the physical properties of monolithic forms. The constraints produced during the manufacturing process were analyzed and compared to those of dispersed fuel. The bonding process used for dispersion fuels differs from the techniques applied to foil bonding used for pure alloys. The quality of monolithic plates depends on the fabrication method, which usually involves hot isostatic pressing and the thermal annealing effect of residual stress, which degrades the uranium cubic phase. The preservation of the metastable phase has considerable influence on fuel performance. The physical properties of the foil fuel under irradiation are superior to those of aluminum-dispersed fuels. The fuel meat, using zirconium as the diffusion barrier, prevents the interaction layer from becoming excessively thick. The problem with dispersed fuel is breakaway swelling with a medium fission rate. It has been observed that the fuel dispersed in aluminum was minimized in monolithic forms. The pure alloys exhibited a suitable response from a rate at least twice as much as the fission rate of dispersions. The foils can support fissile material concentration combined with a reduced swelling rate. (author)

President Andrus Aljase ohtlik lend / Paavo Kangur

Index Scriptorium Estoniae

Kangur, Paavo, 1966-

2009-01-01

Estonian Airi president ja juhatuse esimees Andrus Aljas ettevõtte arengustsenaariumitest ja tegevusplaanidest järgmisteks aastateks. Estonian Airi positsioonist lennuturul. Vt. samas: Andrus Aljas; Fakte; Andrus Aljas: minu tööpäev

Fuel rod behaviour at high burnup WWER fuel cycles

International Nuclear Information System (INIS)

Medvedev, A.; Bogatyr, S.; Kouznetsov, V.; Khvostov, G.; Lagovsky; Korystin, L.; Poudov, V.

2003-01-01

The modernisation of WWER fuel cycles is carried out on the base of complete modelling and experimental justification of fuel rods up to 70 MWd/kgU. The modelling justification of the reliability of fuel rod and fuel rod with gadolinium is carried out with the use of certified START-3 code. START-3 code has a continuous experimental support. The thermophysical and strength reliability of WWER-440 fuel is justified for fuel rod and pellet burnups 65 MWd/kgU and 74 MWd/U, accordingly. Results of analysis are demonstrated by the example of uranium-gadolinium fuel assemblies of second generation under 5-year cycle with a portion of 6-year assemblies and by the example of successfully completed pilot operation of 5-year cycle fuel assemblies during 6 years at unit 3 of Kolskaja NPP. The thermophysical and strength reliability of WWER-1000 fuel is justified for a fuel rod burnup 66 MWd/kgU by the example of fuel operation under 4-year cycles and 6-year test operation of fuel assemblies at unit 1 of Kalininskaya NPP. By the example of 5-year cycle at Dukovany NPP Unit 2 it was demonstrated that WWER fuel rod of a burnup 58 MWd/kgU ensure reliable operation under load following conditions. The analysis has confirmed sufficient reserves of Russian fuel to implement program of JSC 'TVEL' in order to improve technical and economical parameters of WWER fuel cycles

78 FR 62462 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard Program

Science.gov (United States)

2013-10-22

... renewable fuel is defined as fuel produced from renewable biomass that is used to replace or reduce the quantity of fossil fuel present in home heating oil or jet fuel.\\3\\ In essence, additional renewable fuel... of ``home heating oil.'' EPA determined that this term was ambiguous, and defined it by incorporating...

Fuel processing

International Nuclear Information System (INIS)

Allardice, R.H.

1990-01-01

The technical and economic viability of the fast breeder reactor as an electricity generating system depends not only upon the reactor performance but also on a capability to recycle plutonium efficiently, reliably and economically through the reactor and fuel cycle facilities. Thus the fuel cycle is an integral and essential part of the system. Fuel cycle research and development has focused on demonstrating that the challenging technical requirements of processing plutonium fuel could be met and that the sometimes conflicting requirements of the fuel developer, fuel fabricator and fuel reprocessor could be reconciled. Pilot plant operation and development and design studies have established both the technical and economic feasibility of the fuel cycle but scope for further improvement exists through process intensification and flowsheet optimization. These objectives and the increasing processing demands made by the continuing improvement to fuel design and irradiation performance provide an incentive for continuing fuel cycle development work. (author)

Low contaminant formic acid fuel for direct liquid fuel cell

Science.gov (United States)

Masel, Richard I [Champaign, IL; Zhu, Yimin [Urbana, IL; Kahn, Zakia [Palatine, IL; Man, Malcolm [Vancouver, CA

2009-11-17

A low contaminant formic acid fuel is especially suited toward use in a direct organic liquid fuel cell. A fuel of the invention provides high power output that is maintained for a substantial time and the fuel is substantially non-flammable. Specific contaminants and contaminant levels have been identified as being deleterious to the performance of a formic acid fuel in a fuel cell, and embodiments of the invention provide low contaminant fuels that have improved performance compared to known commercial bulk grade and commercial purified grade formic acid fuels. Preferred embodiment fuels (and fuel cells containing such fuels) including low levels of a combination of key contaminants, including acetic acid, methyl formate, and methanol.

Fuel gases

International Nuclear Information System (INIS)

Anon.

1996-01-01

This paper gives a brief presentation of the context, perspectives of production, specificities, and the conditions required for the development of NGV (Natural Gas for Vehicle) and LPG-f (Liquefied Petroleum Gas fuel) alternative fuels. After an historical presentation of 80 years of LPG evolution in vehicle fuels, a first part describes the economical and environmental advantages of gaseous alternative fuels (cleaner combustion, longer engines life, reduced noise pollution, greater natural gas reserves, lower political-economical petroleum dependence..). The second part gives a comparative cost and environmental evaluation between the available alternative fuels: bio-fuels, electric power and fuel gases, taking into account the processes and constraints involved in the production of these fuels. (J.S.)

Fuel quality issues in stationary fuel cell systems.

Energy Technology Data Exchange (ETDEWEB)

Papadias, D.; Ahmed, S.; Kumar, R. (Chemical Sciences and Engineering Division)

2012-02-07

Fuel cell systems are being deployed in stationary applications for the generation of electricity, heat, and hydrogen. These systems use a variety of fuel cell types, ranging from the low temperature polymer electrolyte fuel cell (PEFC) to the high temperature solid oxide fuel cell (SOFC). Depending on the application and location, these systems are being designed to operate on reformate or syngas produced from various fuels that include natural gas, biogas, coal gas, etc. All of these fuels contain species that can potentially damage the fuel cell anode or other unit operations and processes that precede the fuel cell stack. These detrimental effects include loss in performance or durability, and attenuating these effects requires additional components to reduce the impurity concentrations to tolerable levels, if not eliminate the impurity entirely. These impurity management components increase the complexity of the fuel cell system, and they add to the system's capital and operating costs (such as regeneration, replacement and disposal of spent material and maintenance). This project reviewed the public domain information available on the impurities encountered in stationary fuel cell systems, and the effects of the impurities on the fuel cells. A database has been set up that classifies the impurities, especially in renewable fuels, such as landfill gas and anaerobic digester gas. It documents the known deleterious effects on fuel cells, and the maximum allowable concentrations of select impurities suggested by manufacturers and researchers. The literature review helped to identify the impurity removal strategies that are available, and their effectiveness, capacity, and cost. A generic model of a stationary fuel-cell based power plant operating on digester and landfill gas has been developed; it includes a gas processing unit, followed by a fuel cell system. The model includes the key impurity removal steps to enable predictions of impurity breakthrough

Fuel cells for electricity generation from carbonaceous fuels

Energy Technology Data Exchange (ETDEWEB)

Ledjeff-Hey, K; Formanski, V; Roes, J [Gerhard-Mercator- Universitaet - Gesamthochschule Duisburg, Fachbereich Maschinenbau/Fachgebiet Energietechnik, Duisburg (Germany); Heinzel, A [Fraunhofer Inst. for Solar Energy Systems (ISE), Freiburg (Germany)

1998-09-01

Fuel cells, which are electrochemical systems converting chemical energy directly into electrical energy with water and heat as by-products, are of interest as a means of generating electricity which is environmentally friendly, clean and highly efficient. They are classified according to the electrolyte used. The main types of cell in order of operating temperature are described. These are: alkaline fuel cells, the polymer electrolyte membrane fuel cell (PEMFC); the phosphoric acid fuel cell (PAFC); the molten carbonate fuel cell (MCFC); the solid oxide fuel cell (SOFC). Applications depend on the type of cell and may range from power generation on a large scale to mobile application in cars or portable systems. One of the most promising options is the PEM-fuel cell stack where there has been significant improvement in power density in recent years. The production from carbonaceous fuels and purification of the cell fuel, hydrogen, is considered. Of the purification methods available, hydrogen separation by means of palladium alloy membranes seems particular effective in reducing CO concentrations to the low levels required for PEM cells. (UK)

Fuel cells : a viable fossil fuel alternative

Energy Technology Data Exchange (ETDEWEB)

Paduada, M.

2007-02-15

This article presented a program initiated by Natural Resources Canada (NRCan) to develop proof-of-concept of underground mining vehicles powered by fuel cells in order to eliminate emissions. Recent studies on American and Canadian underground mines provided the basis for estimating the operational cost savings of switching from diesel to fuel cells. For the Canadian mines evaluated, the estimated ventilation system operating cost reductions ranged from 29 per cent to 75 per cent. In order to demonstrate the viability of a fuel cell-powered vehicle, NRCan has designed a modified Caterpillar R1300 loader with a 160 kW hybrid power plant in which 3 stacks of fuel cells deliver up to 90 kW continuously, and a nickel-metal hydride battery provides up to 70 kW. The battery subsystem transiently boosts output to meet peak power requirements and also accommodates regenerative braking. Traction for the loader is provided by a brushless permanent magnet traction motor. The hydraulic pump motor is capable of a 55 kW load continuously. The loader's hydraulic and traction systems are operated independently. Future fuel cell-powered vehicles designed by the program may include a locomotive and a utility vehicle. Future mines running their operations with hydrogen-fueled equipment may also gain advantages by employing fuel cells in the operation of handheld equipment such as radios, flashlights, and headlamps. However, the proton exchange membrane (PEM) fuel cells used in the project are prohibitively expensive. The catalytic content of a fuel cell can add hundreds of dollars per kW of electric output. Production of catalytic precious metals will be strongly connected to the scale of use and acceptance of fuel cells in vehicles. In addition, the efficiency of hydrogen production and delivery is significantly lower than the well-to-tank efficiency of many conventional fuels. It was concluded that an adequate hydrogen infrastructure will be required for the mining industry

Onko lähisukukielen vaikutus suomen ja viron omaksumiseen symmetristä? Korpuspohjaisen tutkimuksen tuloksia ja haasteita

Directory of Open Access Journals (Sweden)

Annekatrin Kaivapalu

2011-10-01

Full Text Available This paper focuses on symmetry of positive morphological first language influence on the bases of the examples of EILC and ICLFI which were chosen according to convergence and divergence between Estonian and Finnish morphological structures. Five groups of elative singular forms in texts of proficiency levels B1 and B2 according to a scale of Common European Framework of Reference for Languages: Learning, teaching and assessment (CEFR, written by Estonian learners of Finnish and Finnish learners of Estonian were analyzed.

Fuel cracking in relation to fuel oxidation in support of an out-reactor instrumented defected fuel experiment

Energy Technology Data Exchange (ETDEWEB)

Quastel, A.; Thiriet, C. [Atomic Energy of Canada Limited, Chalk River, ON (Canada); Lewis, B., E-mail: brent.lewis@uoit.ca [Univ. of Ontario Inst. of Tech., Oshawa, ON (Canada); Corcoran, E., E-mail: emily.corcoran@rmc.ca [Royal Military College of Canada, Kingston, ON (Canada)

2014-07-01

An experimental program funded by the CANDU Owners Group (COG) is studying an out-reactor instrumented defected fuel experiment in Stern Laboratories (Hamilton, Ontario) with guidance from Atomic Energy of Canada Limited (AECL). The objective of this test is to provide experimental data for validation of a mechanistic fuel oxidation model. In this experiment a defected fuel element with UO{sub 2} pellets will be internally heated with an electrical heater element, causing the fuel to crack. By defecting the sheath in-situ the fuel will be exposed to light water coolant near normal reactor operating conditions (pressure 10 MPa and temperature 265-310{sup o}C) causing fuel oxidation, especially near the hotter regions of the fuel in the cracks. The fuel thermal conductivity will change, resulting in a change in the temperature distribution of the fuel element. This paper provides 2D r-θ plane strain solid mechanics models to simulate fuel thermal expansion, where conditions for fuel crack propagation are investigated with the thermal J integral to predict fuel crack stress intensity factors. Finally since fuel crack geometry can affect fuel oxidation this paper shows that the solid mechanics model with pre-set radial cracks can be coupled to a 2D r-θ fuel oxidation model. (author)

Fuel characteristics pertinent to the design of aircraft fuel systems

Science.gov (United States)

Barnett, Henry C; Hibbard, R R

1953-01-01

Because of the importance of fuel properties in design of aircraft fuel systems the present report has been prepared to provide information on the characteristics of current jet fuels. In addition to information on fuel properties, discussions are presented on fuel specifications, the variations among fuels supplied under a given specification, fuel composition, and the pertinence of fuel composition and physical properties to fuel system design. In some instances the influence of variables such as pressure and temperature on physical properties is indicated. References are cited to provide fuel system designers with sources of information containing more detail than is practicable in the present report.

On the nuclear fuel and fossil fuel reserves

International Nuclear Information System (INIS)

Fettweis, G.

1978-01-01

A short discussion of the nuclear fuel and fossil fuel reserves and the connected problem of prices evolution is presented. The need to regard fuel production under an economic aspect is emphasized. Data about known and assessed fuel reserves, world-wide and with special consideration of Austria, are reviewed. It is concluded that in view of the fuel reserves situation an energy policy which allows for a maximum of options seems adequate. (G.G.)

Fuel R and D to improve fuel reliability

International Nuclear Information System (INIS)

Yang, Rosa; Cheng, Bo; Deshon, Jeff; Edsinger, Kurt; Ozer, Odelli

2006-01-01

Light water reactor fuel is operating in an increasingly challenging environment. Fuel burnup extension and cycle length increase both can increase the local duty. Reactor water chemistry modifications for the purpose of protection the plant system materials have the potential of increasing fuel surface deposition and cladding corrosion and hydriding. The status of fuel performance in US reactors is summarized and an update of the Fuel Reliability Program' established by the utility industry to ensure reliability is provided. (author)

Regional differences in semen qualities in the Baltic region.

Science.gov (United States)

Punab, Margus; Zilaitiene, Birute; Jørgensen, Niels; Horte, Antero; Matulevicius, Valentinas; Peetsalu, Ants; Skakkebaek, Niels E

2002-08-01

Recent prospective studies of male reproductive health have shown differences between several European countries. Our objective was to evaluate the current situation in the two Baltic States Estonia and Lithuania. In 1997-99 we investigated semen parameters, levels of reproductive hormones and general health factors of 196 men from the general population in Lithuania; from Estonia, 79 men from the general population and 118 soldiers were investigated. Adjusted for interlaboratory differences and abstinence period, sperm concentration of Lithuanian and Estonian men from the general populations were shown to be 55 and 67 million/mL, respectively. The Estonian soldiers had the highest sperm concentration, 82 million/mL. The frequencies of morphologically normal spermatozoa were 6.2, 7.7 and 9.6%, respectively. In contrast to the semen qualities, highest Inhibin B levels were detected in the Lithuanians (233 pg/mL) followed by Estonian men from the general population (220 pg/mL) and Estonian soldiers (185 pg/mL). The soldiers had also the lowest level of testosterone and oestradiol. The sperm counts of the Estonian and Lithuanian men investigated here are higher than recently shown for Norwegian, Danish, Estonian and Finnish men. Comparisons should be cautiously drawn as the groups are not completely comparable. Still, even within the Baltic region, geographically close and sharing common recent social history, differences in semen quality and levels of reproductive hormones are apparent.

Instrumentation of fuel elements and fuel plates

International Nuclear Information System (INIS)

Durand, J.P.; Fanjas, Y.

1993-01-01

When controlling the behaviour of a reactor or developing a new fuel concept, it is of utmost interest to have the possibility to confirm the thermohydraulic calculations by actual measurements in the fuel elements or in the fuel plates. For years, CERCA has developed the technology and supplied its customers with fuel elements equipped with pressure or temperature measuring devices according to the requirements. Recent customer projects have led to the development of a new method to introduce thermocouples directly into the fuel plate meat instead of the cladding. The purpose of this paper is to review the various instrumentation possibilities available at CERCA. (author)

Instrumentation of fuel elements and fuel plates

International Nuclear Information System (INIS)

Durand, J.P.; Fanjas, Y.

1994-01-01

When controlling the behaviour of a reactor or developing a new fuel concept, it is of utmost interest to have the possibility to confirm the thermohydraulic calculations by actual measurements in the fuel elements or in the fuel plates. For years, CERCA has developed the technology and supplied its customers with fuel elements equipped with pressure or temperature measuring devices according to the requirements. Recent customer projects have lead to the development of a new method to introduce thermocouples directly into the fuel plate meat instead of the cladding. The purpose of this paper is to review the various instrumentation possibilities available at CERCA. (author)

Alternative Fuels Data Center: Biodiesel Fueling Stations

Science.gov (United States)

Locations Infrastructure Development Vehicles Laws & Incentives Biodiesel Fueling Stations Photo of a location or along a route. Infrastructure Development Learn about biodiesel fueling infrastructure codes Case Studies California Ramps Up Biofuels Infrastructure Green Fueling Station Powers Fleets in Upstate

Fuel assembly

International Nuclear Information System (INIS)

Nomata, Terumitsu.

1993-01-01

Among fuel pellets to be loaded to fuel cans of a fuel assembly, fuel pellets having a small thermal power are charged in a region from the end of each of spacers up to about 50mm on the upstream of coolants that flow vertically at the periphery of fuel rods. Coolants at the periphery of fuel rods are heated by the heat generation, to result in voids. However, since cooling effect on the upstream of the spacers is low due to influences of the spacers. Further, since the fuel pellets disposed in the upstream region have small thermal power, a void coefficient is not increased. Even if a thermal power exceeding cooling performance should be generated, there is no worry of causing burnout in the upstream region. Even if burnout should be caused, safety margin and reliability relative to burnout are improved, to increase an allowable thermal power, thereby enabling to improve integrity and reliability of fuel rods and fuel assemblies. (N.H.)

Fuel assembly

International Nuclear Information System (INIS)

Gjertsen, R.K.; Bassler, E.A.; Huckestein, E.A.; Salton, R.B.; Tower, S.N.

1988-01-01

A fuel assembly adapted for use with a pressurized water nuclear reactor having capabilities for fluid moderator spectral shift control is described comprising: parallel arranged elongated nuclear fuel elements; means for providing for axial support of the fuel elements and for arranging the fuel elements in a spaced array; thimbles interspersed among the fuel elements adapted for insertion of a rod control cluster therewithin; means for structurally joining the fuel elements and the guide thimbles; fluid moderator control means for providing a volume of low neutron absorbing fluid within the fuel assembly and for removing a substantially equivalent volume of reactor coolant water therefrom, a first flow manifold at one end of the fuel assembly sealingly connected to a first end of the moderator control tubes whereby the first ends are commonly flow connected; and a second flow manifold, having an inlet passage and an outlet passage therein, sealingly connected to a second end of the moderator control tubes at a second end of the fuel assembly

Alternative Fuels Data Center: Ethanol Fueling Stations

Science.gov (United States)

... More in this section... Ethanol Basics Benefits & Considerations Stations Locations Infrastructure fueling stations by location or along a route. Infrastructure Development Learn about ethanol fueling infrastructure; codes, standards, and safety; and ethanol equipment options. Maps & Data E85 Fueling Station

Apparatus and method for grounding compressed fuel fueling operator

Science.gov (United States)

Cohen, Joseph Perry; Farese, David John; Xu, Jianguo

2002-06-11

A safety system for grounding an operator at a fueling station prior to removing a fuel fill nozzle from a fuel tank upon completion of a fuel filling operation is provided which includes a fuel tank port in communication with the fuel tank for receiving and retaining the nozzle during the fuel filling operation and a grounding device adjacent to the fuel tank port which includes a grounding switch having a contact member that receives physical contact by the operator and where physical contact of the contact member activates the grounding switch. A releasable interlock is included that provides a lock position wherein the nozzle is locked into the port upon insertion of the nozzle into the port and a release position wherein the nozzle is releasable from the port upon completion of the fuel filling operation and after physical contact of the contact member is accomplished.

Nuclear fuel

International Nuclear Information System (INIS)

D Hondt, P.

1998-01-01

The research and development programme on nuclear fuel at the Belgian Nuclear Research Centre SCK/CEN is described. The objective of this programme is to enhance the quantitative prediction of the operational limits of nuclear fuel and to assess the behaviour of fuel under incidental and accidental conditions. Progress is described in different domains including the modelling of fission gas release in LWR fuel, thermal conductivity, basic physical phenomena, post-irradiation examination for fuel performance assessment, and conceptual studies of incidental and accidental fuel experiments

Automotive Fuel Processor Development and Demonstration with Fuel Cell Systems

Energy Technology Data Exchange (ETDEWEB)

Nuvera Fuel Cells

2005-04-15

The potential for fuel cell systems to improve energy efficiency and reduce emissions over conventional power systems has generated significant interest in fuel cell technologies. While fuel cells are being investigated for use in many applications such as stationary power generation and small portable devices, transportation applications present some unique challenges for fuel cell technology. Due to their lower operating temperature and non-brittle materials, most transportation work is focusing on fuel cells using proton exchange membrane (PEM) technology. Since PEM fuel cells are fueled by hydrogen, major obstacles to their widespread use are the lack of an available hydrogen fueling infrastructure and hydrogen's relatively low energy storage density, which leads to a much lower driving range than conventional vehicles. One potential solution to the hydrogen infrastructure and storage density issues is to convert a conventional fuel such as gasoline into hydrogen onboard the vehicle using a fuel processor. Figure 2 shows that gasoline stores roughly 7 times more energy per volume than pressurized hydrogen gas at 700 bar and 4 times more than liquid hydrogen. If integrated properly, the fuel processor/fuel cell system would also be more efficient than traditional engines and would give a fuel economy benefit while hydrogen storage and distribution issues are being investigated. Widespread implementation of fuel processor/fuel cell systems requires improvements in several aspects of the technology, including size, startup time, transient response time, and cost. In addition, the ability to operate on a number of hydrocarbon fuels that are available through the existing infrastructure is a key enabler for commercializing these systems. In this program, Nuvera Fuel Cells collaborated with the Department of Energy (DOE) to develop efficient, low-emission, multi-fuel processors for transportation applications. Nuvera's focus was on (1) developing fuel

Fluid pressure method for recovering fuel pellets from nuclear fuel elements

International Nuclear Information System (INIS)

John, C.D. Jr.

1979-01-01

A method is described for removing fuel pellets from a nuclear fuel element without damaging the fuel pellets or fuel element sheath so that both may be reused. The method comprises holding the fuel element while a high pressure stream internally pressurizes the fuel element to expand the fuel element sheath away from the fuel pellets therein so that the fuel pellets may be easily removed

Nuclear Fuel elements

International Nuclear Information System (INIS)

Hirakawa, Hiromasa.

1979-01-01

Purpose: To reduce the stress gradient resulted in the fuel can in fuel rods adapted to control the axial power distribution by the combination of fuel pellets having different linear power densities. Constitution: In a fuel rod comprising a first fuel pellet of a relatively low linear power density and a second fuel pellet of a relatively high linear power density, the second fuel pellet is cut at its both end faces by an amount corresponding to the heat expansion of the pellet due to the difference in the linear power density to the adjacent first fuel pellet. Thus, the second fuel pellet takes a smaller space than the first fuel pellet in the fuel can. This can reduce the stress produced in the portion of the fuel can corresponding to the boundary between the adjacent fuel pellets. (Kawakami, Y.)

The Yukos Crisis Brings Thunderclouds to the Railway Carriage Business / Toivo Tänavsuu

Index Scriptorium Estoniae

Tänavsuu, Toivo

2004-01-01

Russian Estonian Rail Services AS - kõige konkurentsivõimelisem transpordi-, side- ja logistikaettevõtete hulgas, Hansapanga kõrgepalgalise eksportööri eriauhinna laureaat. Lisa: Russian Estonian Rail Services 2003. Kommenteerib Indrek Neivelt. Tabel: Transpordi-, side- ja logistikaettevõtted

Jukose kriis toob äikesepilved vaguniäri kohale / Toivo Tänavsuu

Index Scriptorium Estoniae

Tänavsuu, Toivo

2004-01-01

Russian Estonian Rail Services AS - kõige konkurentsivõimelisem transpordi-, side- ja logistikaettevõtete hulgas, Hansapanga kõrgepalgalise eksportööri eriauhinna laureaat. Lisa: Russian Estonian Rail Services 2003. Kommenteerib Indrek Neivelt. Tabel: Transpordi-, side- ja logistikaettevõtted

77 FR 61313 - Regulation of Fuels and Fuel Additives: Modifications to Renewable Fuel Standard and Diesel...

Science.gov (United States)

2012-10-09

... transportation fuels, including gasoline and diesel fuel, or renewable fuels such as ethanol and biodiesel, as... that which arose under RFS1 for certain renewable fuels (in particular biodiesel) that were produced...

Fuel assembly

International Nuclear Information System (INIS)

Fujibayashi, Toru.

1970-01-01

Herein disclosed is a fuel assembly in which a fuel rod bundle is easily detachable by rotating a fuel rod fastener rotatably mounted to the upper surface of an upper tie-plate supporting a fuel bundle therebelow. A locking portion at the leading end of each fuel rod protrudes through the upper tie-plate and is engaged with or separated from the tie-plate by the rotation of the fastener. The removal of a desired fuel rod can therefore be remotely accomplished without the necessity of handling pawls, locking washers and nuts. (Owens, K.J.)

75 FR 14669 - Regulation of Fuels and Fuel Additives: Changes to Renewable Fuel Standard Program

Science.gov (United States)

2010-03-26

... RINs from producers of the renewable fuel. The obligated parties do not need lead time for construction... fuels and new limits on renewable biomass feedstocks. This rulemaking marks the first time that... advanced biofuel and multiple cellulosic-based fuels with their 60% threshold. Additional fuel pathways...

Fuel property effects on Navy aircraft fuel systems

Science.gov (United States)

Moses, C. A.

1984-01-01

Problems of ensuring compatibility of Navy aircraft with fuels that may be different than the fuels for which the equipment was designed and qualified are discussed. To avoid expensive requalification of all the engines and airframe fuel systems, methodologies to qualify future fuels by using bench-scale and component testing are being sought. Fuel blends with increasing JP5-type aromatic concentration were seen to produce less volume swell than an equivalent aromatic concentration in the reference fuel. Futhermore, blends with naphthenes, decalin, tetralin, and naphthalenes do not deviate significantly from the correlation line of aromatic blends, Similar results are found with tensile strenth and elongation. Other elastomers, sealants, and adhesives are also being tested.

Characterization of fuel swelling in helium-bonded carbide fuel pins

International Nuclear Information System (INIS)

Louie, D.L.Y.

1987-08-01

This work is not only the first attempt at characterizing the swelling of (U,Pu)C fuel pellets, but it also represents the only detailed examinations on carbide fuel swelling at high fuel burnups (4 to 16 at. %). This characterization includes the contributions of fission gases, cracks and solid fission products to fuel swelling. Significantly, the contributions of fission gases and cracks were determined by using the image analysis technique (IAT) which allows researchers to take areal measurements of the irradiated fuel porosity and cracks from the photographs of metallographic fuel samples. However, because areal measurements for varying depths in the fuel pellet could not be obtained, the crack areal measurements could not be converted into volumetric quantities. Consequently, in this situation, an areal fuel swelling analysis was used. The macroscopic fission-gas induced fuel swelling (MAS) caused by fission-gas bubbles and pores > 1 μm was determined using the measured irradiated fuel porosity because the measuring range of IAT is limited to bubbles and pores >1 μm. Conversely, for fuel swelling induced by fission-gas bubbles < 1 μm, the microscopic fission-gas induced fuel swelling (MIS) was estimated using an areal fuel swelling model

Computation of Estonian CORS data using Bernese 5.2 and Gipsy 6.4 softwares

Science.gov (United States)

Kollo, Karin; Kall, Tarmo; Liibusk, Aive

2017-04-01

GNSS permanent station network in Estonia (ESTREF) was established already in 2007. In 2014-15 extensive reconstruction of ESTREF was carried out, including the establishment of 18 new stations, change of the hardware in CORS stations as well as establishing GNSS-RTK service for the whole Estonia. For GNSS-RTK service one needs precise coordinates in well-defined reference frame, i.e., ETRS89. For long time stability of stations and time-series analysis the re-processing of Estonian CORS data is ongoing. We re-process data from 2007 until 2015 with program Bernese GNSS 5.2 (Dach, 2015). For the set of ESTREF stations established in 2007, we perform as well computations with GIPSY 6.4 software (Ries et al., 2015). In the computations daily GPS-only solution was used. For precise orbits, final products from CODE (CODE analysis centre at the Astronomical Institute of the University of Bern) and JPL (Jet Propulsion Laboratory) for Bernese and GIPSY solutions were used, respectively. The cut-off angle was set to 10 degrees in order to avoid near-field multipath influence. In GIPSY, precise point positioning method with fixing ambiguities was used. Bernese calculations were performed based on double difference processing. Antenna phase centers were modelled based on igs08.atx and epnc_08.atx files. Vienna mapping function was used for mapping tropospheric delays. For the GIPSY solution, the higher order ionospheric term was modelled based on IRI-2012b model. For the Bernese solution higher order ionospheric term was neglected. FES2004 ocean tide loading model was used for the both computation strategies. As a result, two solutions using different scientific GNSS computation programs were obtained. The results from Bernese and GIPSY solutions were compared, using station repeatability values, RMS and coordinate differences. KEYWORDS: GNSS reference station network, Bernese GNSS 5.2, Gipsy 6.4, Estonia. References: Dach, R., S. Lutz, P. Walser, P. Fridez (Eds); 2015

KMRR fuel design

International Nuclear Information System (INIS)

Son, D.S.; Sim, B.S.; Kim, T.R.; Hwang, W.; Kim, B.G.; Ku, Y.H.; Lee, C.B.; Lim, I.C.

1992-06-01

KMRR fuel rod design criteria on fuel swelling, blistering and oxide spallation have been reexamined. Fuel centerline temperature limit of 250deg C in normal operation condition and fuel swelling limit of 12 % at the end of life have been proposed to prevent fuel failure due to excessive fuel swelling. Fuel temperature limit of 485deg C has been proposed to exclude the possibility of fuel failures during transients or under accident condition. Further analyses are needed to decide the fuel cladding temperature limit to preclude the oxide spallation. Design changes in fuel assembly structure and their effects on related systems have been reviewed from a structural integrity viewpoint. The remained works in fuel mechanical design area have been identified and further efforts of fuel design group will be focused on these aspects. (Author)

Fuel cycle cost comparisons with oxide and silicide fuels

Energy Technology Data Exchange (ETDEWEB)

Matos, J E; Freese, K E [RERTR Program, Argonne National Laboratory (United States)

1983-09-01

This paper addresses fuel cycle cost comparisons for a generic 10 MW reactor with HEU aluminide fuel and with LEU oxide and silicide fuels in several fuel element geometries. The intention of this study is to provide a consistent assessment of various design options from a cost point of view. The status of the development and demonstration of the oxide and silicide fuels are presented in several papers in these proceedings. Routine utilization of these fuels with the uranium densities considered here requires that they are successfully demonstrated and licensed. Thermal-hydraulic safety margins, shutdown margins, mixed cores, and transient analyses are not addressed here, but analyses of these safety issues are in progress for a limited number of the most promising design options. Fuel cycle cost benefits could result if a number of reactors were to utilize fuel elements with the same number or different numbers of the same standard fuel plate. Data is presented to quantify these potential cost benefits. This analysis shows that there are a number of fuel element designs using LEU oxide or silicide fuels that have either the same or lower total fuel cycle costs than the HEU design. Use of these fuels with the uranium densities considered requires that they are successfully demonstrated and licensed. All safety criteria for the reactor with these fuel element designs need to be satisfied as well. With LEU oxide fuel, 31 g U/cm{sup 3} 1 and 0.76 mm--thick fuel meat, elements with 18-22 plates 320-391 g {sup 235}U) result in the same or lower total costs than with the HEU element 23 plates, 280 g {sup 235}U). Higher LEU loadings (more plates per element) are needed for larger excess reactivity requirements. However, there is little cost advantage to using more than 20 of these plates per element. Increasing the fuel meat thickness from 0.76 mm to 1.0 mm with 3.1 g U/cm{sup 3} in the design with 20 plates per element could result in significant cost reductions if the

76 FR 18066 - Regulation of Fuels and Fuel Additives: Changes to Renewable Fuel Standard Program

Science.gov (United States)

2011-04-01

... ENVIRONMENTAL PROTECTION AGENCY 40 CFR Part 80 Regulation of Fuels and Fuel Additives: Changes to Renewable Fuel Standard Program CFR Correction In Title 40 of the Code of Federal Regulations, Parts 72 to...-generating foreign producers and importers of renewable fuels for which RINs have been generated by the...

Review of the IAEA nuclear fuel cycle and material section activities connected with nuclear fuel including WWER fuel

International Nuclear Information System (INIS)

Sokolov, F.

2001-01-01

Program activities on Nuclear Fuel Cycle and Materials cover the areas of: 1) raw materials (B.1.01); 2) fuel performance and technology (B.1.02); 3) pent fuel (B.1.03); 4) fuel cycle issues and information system (B.1.04); 5) support to technical cooperation activities (B.1.05). The IAEA activities in fuel performance and technology in 2001 include organization of the fuel experts meetings and completion of the Co-ordinate Research Projects (CRP). The special attention is given to the advanced post-irradiation examination techniques for water reactor fuel and fuel behavior under transients and LOCA conditions. An international research program on modeling of activity transfer in primary circuit of NPP is finalized in 2001. A new CRP on fuel modeling at extended burnup (FUMEX II) has planed to be carried out during the period 2002-2006. In the area of spent fuel management the implementation of burnup credit (BUC) in spent fuel management systems has motivated to be used in criticality safety applications, based on economic consideration. An overview of spent fuel storage policy accounting new fuel features as higher enrichment and final burnup, usage of MOX fuel and prolongation of the term of spent fuel storage is also given

Increasing TRIGA fuel lifetime with 12 wt.% U TRIGA fuel

Energy Technology Data Exchange (ETDEWEB)

Naughton, W F; Cenko, M J; Levine, S H; Witzig, W F [Pennsylvania State University (United States)

1974-07-01

In-core fuel management studies have been performed for the Penn State Breazeale Reactor (PSBR) wherein 12 wt % U fuel elements are used to replace the standard 8.5 wt % U TRIGA fuel. The core configuration used to develop a calculational model was a 90-element hexagonal array, which is representative of the PSBR core, and consists of five hexagonal rings surrounding a central thimble containing water. The technique employed for refueling the core fully loaded with 8.5 wt % U fuel involves replacing 8.5 wt % U fuel with 12 wt % U fuel using an in-out reloading scheme. A batch reload consists of 6 new 12 wt % U fuel elements. Placing the 12 wt % U fuel in the B ring produces fuel temperatures ({approx}450 {sup o}C) that are well below the 800{sup o}C maximum limitation when the PSBR is operating at its maximum allowed power of 1 Megawatt. The advantages of using new 12 wt % U fuel to replace the burned up 8.5 wt % U fuel in the B ring over refueling strictly with 8.5 wt % U-Zr TRIGA fuel are clearly delineated in Table 1 where cost calculations used the General Atomic pre-1972 prices for TRIGA fuel, i.e., $1500 and $1650 for an 8.5 and 12 wt % U fuel element, respectively. Experimental results obtained to date utilizing the 12 wt % U fuel elements agree with the computed results. (author)

Progress of the DUPIC Fuel Compatibility Analysis (IV) - Fuel Performance

International Nuclear Information System (INIS)

Choi, Hang Bok; Ryu, Ho Jin; Roh, Gyu Hong; Jeong, Chang Joon; Park, Chang Je; Song, Kee Chan; Lee, Jung Won

2005-10-01

This study describes the mechanical compatibility of the direct use of spent pressurized water reactor (PWR) fuel in Canada deuterium uranium (CANDU) reactors (DUPIC) fuel, when it is loaded into a CANDU reactor. The mechanical compatibility can be assessed for the fuel management, primary heat transport system, fuel channel, and the fuel handling system in the reactor core by both the experimental and analytic methods. Because the physical dimensions of the DUPIC fuel bundle adopt the CANDU flexible (CANFLEX) fuel bundle design which has already been demonstrated for a commercial use in CANDU reactors, the experimental compatibility analyses focused on the generation of material property data and the irradiation tests of the DUPIC fuel, which are used for the computational analysis. The intermediate results of the mechanical compatibility analysis have shown that the integrity of the DUPIC fuel is mostly maintained under the high power and high burnup conditions even though some material properties like the thermal conductivity is a little lower compared to the uranium fuel. However it is required to slightly change the current DUPIC fuel design to accommodate the high internal pressure of the fuel element. It is also strongly recommended to perform more irradiation tests of the DUPIC fuel to accumulate a database for the demonstration of the DUPIC fuel performance in the CANDU reactor

Progress of the DUPIC Fuel Compatibility Analysis (IV) - Fuel Performance

Energy Technology Data Exchange (ETDEWEB)

Choi, Hang Bok; Ryu, Ho Jin; Roh, Gyu Hong; Jeong, Chang Joon; Park, Chang Je; Song, Kee Chan; Lee, Jung Won

2005-10-15

This study describes the mechanical compatibility of the direct use of spent pressurized water reactor (PWR) fuel in Canada deuterium uranium (CANDU) reactors (DUPIC) fuel, when it is loaded into a CANDU reactor. The mechanical compatibility can be assessed for the fuel management, primary heat transport system, fuel channel, and the fuel handling system in the reactor core by both the experimental and analytic methods. Because the physical dimensions of the DUPIC fuel bundle adopt the CANDU flexible (CANFLEX) fuel bundle design which has already been demonstrated for a commercial use in CANDU reactors, the experimental compatibility analyses focused on the generation of material property data and the irradiation tests of the DUPIC fuel, which are used for the computational analysis. The intermediate results of the mechanical compatibility analysis have shown that the integrity of the DUPIC fuel is mostly maintained under the high power and high burnup conditions even though some material properties like the thermal conductivity is a little lower compared to the uranium fuel. However it is required to slightly change the current DUPIC fuel design to accommodate the high internal pressure of the fuel element. It is also strongly recommended to perform more irradiation tests of the DUPIC fuel to accumulate a database for the demonstration of the DUPIC fuel performance in the CANDU reactor.

Fuel cycle cost study with HEU and LEU fuels

International Nuclear Information System (INIS)

Matos, J.E.; Freese, K.E.

1984-01-01

Fuel cycle costs are compared for a range of 235 U loadings with HEU and LEU fuels using the IAEA generic 10 MW reactor as an example. If LEU silicide fuels are successfully demonstrated and licensed, the results indicate that total fuel cycle costs can be about the same or lower than those with the HEU fuels that are currently used in most research reactors

Inert matrix fuel in dispersion type fuel elements

Energy Technology Data Exchange (ETDEWEB)

Savchenko, A.M. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation)]. E-mail: sav@bochvar.ru; Vatulin, A.V. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Morozov, A.V. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Sirotin, V.L. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Dobrikova, I.V. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Kulakov, G.V. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Ershov, S.A. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Kostomarov, V.P. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation); Stelyuk, Y.I. [A.A. Bochvar All-Russia Research Institute of Inorganic Materials (VNIINM) 123060, P.O. Box 369, Rogova Street, 5A, Moscow (Russian Federation)

2006-06-30

The advantages of using inert matrix fuel (IMF) as a dispersion fuel in an aluminium alloy matrix are considered, in particular, low temperatures in the fuel centre, achievable high burn-ups, serviceability in transients and an environmentally friendly process of fuel rod fabrication. Two main versions of IMF are under development at A.A. Bochvar Institute, i.e. heterogeneous or isolated distribution of plutonium. The out-of-pile results on IMF loaded with uranium dioxide as plutonium simulator are presented. Fuel elements with uranium dioxide composition fabricated at A.A. Bochvar Institute are currently under MIR tests (RIAR, Dimitrovgrad). The fuel elements reached a burn-up of 88 MW d kg{sup -1} (equivalent to the burn up of the standard uranium dioxide pelletized fuel) without loss of leak-tightness of the cladding. The feasibility of fabricating IMF of these particular types with plutonium dioxide is considered with a view to in-pile irradiation.

Inert matrix fuel in dispersion type fuel elements

Science.gov (United States)

Savchenko, A. M.; Vatulin, A. V.; Morozov, A. V.; Sirotin, V. L.; Dobrikova, I. V.; Kulakov, G. V.; Ershov, S. A.; Kostomarov, V. P.; Stelyuk, Y. I.

2006-06-01

The advantages of using inert matrix fuel (IMF) as a dispersion fuel in an aluminium alloy matrix are considered, in particular, low temperatures in the fuel centre, achievable high burn-ups, serviceability in transients and an environmentally friendly process of fuel rod fabrication. Two main versions of IMF are under development at A.A. Bochvar Institute, i.e. heterogeneous or isolated distribution of plutonium. The out-of-pile results on IMF loaded with uranium dioxide as plutonium simulator are presented. Fuel elements with uranium dioxide composition fabricated at A.A. Bochvar Institute are currently under MIR tests (RIAR, Dimitrovgrad). The fuel elements reached a burn-up of 88 MW d kg-1 (equivalent to the burn up of the standard uranium dioxide pelletized fuel) without loss of leak-tightness of the cladding. The feasibility of fabricating IMF of these particular types with plutonium dioxide is considered with a view to in-pile irradiation.

Fuel Cell and Hydrogen Technology Validation | Hydrogen and Fuel Cells |

Science.gov (United States)

NREL Fuel Cell and Hydrogen Technology Validation Fuel Cell and Hydrogen Technology Validation The NREL technology validation team works on validating hydrogen fuel cell electric vehicles; hydrogen fueling infrastructure; hydrogen system components; and fuel cell use in early market applications such as

Advanced fuel cycles and burnup increase of WWER-440 fuel

International Nuclear Information System (INIS)

Proselkov, V.; Saprykin, V.; Scheglov, A.

2003-01-01

Analyses of operational experience of 4.4% enriched fuel in the 5-year fuel cycle at Kola NPP Unit 3 and fuel assemblies with Uranium-Gadolinium fuel at Kola NPP Unit 4 are made. The operability of WWER-440 fuel under high burnup is studied. The obtained results indicate that the fuel rods of WWER-440 assemblies intended for operation within six years of the reviewed fuel cycle totally preserve their operability. Performed analyses have demonstrated the possibility of the fuel rod operability during the fuel cycle. 12 assemblies were loaded into the reactor unit of Kola 3 in 2001. The predicted burnup in six assemblies was 59.2 MWd/kgU. Calculated values of the burnup after operation for working fuel assemblies were ∼57 MWd/kgU, for fuel rods - up to ∼61 MWd/kgU. Data on the coolant activity, specific activity of the benchmark iodine radionuclides of the reactor primary circuit, control of the integrity of fuel rods of the assemblies that were operated for six years indicate that not a single assembly has reached the criterion for the early discharge

Nuclear fuel management via fuel quality factor averaging

International Nuclear Information System (INIS)

Mingle, J.O.

1978-01-01

The numerical procedure of prime number averaging is applied to the fuel quality factor distribution of once and twice-burned fuel in order to evolve a fuel management scheme. The resulting fuel shuffling arrangement produces a near optimal flat power profile both under beginning-of-life and end-of-life conditions. The procedure is easily applied requiring only the solution of linear algebraic equations. (author)

Heaoluühiskond kui luterluse tagajärg: Welfare Society as a Consequence of Lutheranism

DEFF Research Database (Denmark)

Põder, Johann-Christian

2018-01-01

Essay on Max Weber, Calvinism and Capitalism, Lutheranism and the modern Welfare State Opinion Section of the Estonian Public Broadcasting/TV......Essay on Max Weber, Calvinism and Capitalism, Lutheranism and the modern Welfare State Opinion Section of the Estonian Public Broadcasting/TV...

Alternative Fuels Data Center: Krug Energy Opens Natural Gas Fueling

Science.gov (United States)

Station in Arkansas Krug Energy Opens Natural Gas Fueling Station in Arkansas to someone by E -mail Share Alternative Fuels Data Center: Krug Energy Opens Natural Gas Fueling Station in Arkansas on Facebook Tweet about Alternative Fuels Data Center: Krug Energy Opens Natural Gas Fueling Station in

Romanian nuclear fuel fabrication and in-reactor fuel operational experience

International Nuclear Information System (INIS)

Budan, O.

2003-01-01

A review of the Romanian nuclear program since mid 60's is made. After 1990, the new Romanian nuclear power authority, RENEL-GEN, elaborated a realistic Nuclear Fuel Program. This program went through the Romanian nuclear fuel plant qualification with the Canadian (AECL and ZPI) support, restarting in January 1995 of the industrial nuclear fuel production, quality evaluation of the fuel produced before 1990 and the recovery of this fuel. This new policy produced good results. FCN is since 1995 the only CANDU fuel supplier from outside Canada recognised by AECL as an authorised CANDU fuel manufacturer. The in-reactor performances and behaviour of the fuel manufactured by FCN after its qualification have been excellent. Very low - more then five times lesser than the design value - fuel defect rate has been recorded up to now and the average discharge of this fuel was with about 9% greater than the design value. Since mid 1998 when SNN took charge of the production of nuclear generated electricity, FCN made significant progresses in development and procurement of new and more efficient equipment and is now very close to double its fuel production capacity. After the completion of the recovery of the fuel produced before June 1990, FCN is already prepared to shift its fuel production to the so-called 'heavy' bundle containing about 19.3 kg of Uranium per bundle

Specialists' meeting on gas-cooled reactor fuel development and spent fuel treatment

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-07-01

Topics covered during the 'Specialists' meeting on gas-cooled reactor fuel development and spent fuel treatment' were as follows: Selection of constructions and materials, fuel element development concepts; Fabrication of spherical coated fuel particles and fuel element on their base; investigation of fuel properties; Spent fuel treatment and storage; Head-end processing of HTGR fuel elements; investigation of HTGR fuel regeneration process; applicability of gas-fluorine technology of regeneration of spent HTGR fuel elements.

Specialists' meeting on gas-cooled reactor fuel development and spent fuel treatment

International Nuclear Information System (INIS)

1985-01-01

Topics covered during the 'Specialists' meeting on gas-cooled reactor fuel development and spent fuel treatment' were as follows: Selection of constructions and materials, fuel element development concepts; Fabrication of spherical coated fuel particles and fuel element on their base; investigation of fuel properties; Spent fuel treatment and storage; Head-end processing of HTGR fuel elements; investigation of HTGR fuel regeneration process; applicability of gas-fluorine technology of regeneration of spent HTGR fuel elements

Fuel assembly

International Nuclear Information System (INIS)

Watanabe, Shoichi; Hirano, Yasushi.

1998-01-01

A one-half or more of entire fuel rods in a fuel assembly comprises MOX fuel rods containing less than 1wt% of burnable poisons, and at least a portion of the burnable poisons comprises gadolinium. Then, surplus reactivity at an initial stage of operation cycle is controlled to eliminate burnable poisons remained unburnt at a final stage, as well as increase thermal reactivity. In addition, the content of fission plutonium is determined to greater than the content of uranium 235, and fuel rods at corner portions are made not to incorporate burnable poisons. Fuel rods not containing burnable poisons are disposed at positions in adjacent with fuel rods facing to a water rod at one or two directions. Local power at radial center of the fuel assembly is increased to flatten the distortion of radial power distribution. (N.H.)

Fuels Combustion Research: Supercritical Fuel Pyrolysis

National Research Council Canada - National Science Library

Glassman, Irvin

2001-01-01

.... The focus during the subject period was directed to understanding the pyrolysis and combustion of endothermic fuels under subcritical conditions and the pyrolysis of these fuels under supercritical conditions...

Fuels Combustion Research: Supercritical Fuel Pyrolysis

National Research Council Canada - National Science Library

Glassman, Irvin

2000-01-01

.... The focus during the subject period was directed to understanding the pyrolysis and combustion of endothermic fuels under subcritical conditions and the pyrolysis of these fuels under supercritical conditions...

CERDEC Fuel Cell Team: Military Transitions for Soldier Fuel Cells

Science.gov (United States)

2008-10-27

Fuel Cell (DMFC) (PEO Soldier) Samsung: 20W DMFC (CRADA) General Atomics & Jadoo: 50W Ammonia Borane Fueled PEMFC Current Fuel Cell Team Efforts...Continued Ardica: 20W Wearable PEMFC operating on Chemical Hydrides Spectrum Brands w/ Rayovac: Hydrogen Generators and Alkaline Fuel Cells for AA...100W Ammonia Borane fueled PEMFC Ultralife: 150W sodium borohydride fueled PEMFC Protonex: 250W RMFC and Power Manager (ARO) NanoDynamics: 250W SOFC

Feasibility study on AFR-100 fuel conversion from uranium-based fuel to thorium-based fuel

Energy Technology Data Exchange (ETDEWEB)

Heidet, F.; Kim, T.; Grandy, C. (Nuclear Engineering Division)

2012-07-30

Although thorium has long been considered as an alternative to uranium-based fuels, most of the reactors built to-date have been fueled with uranium-based fuel with the exception of a few reactors. The decision to use uranium-based fuels was initially made based on the technology maturity compared to thorium-based fuels. As a result of this experience, lot of knowledge and data have been accumulated for uranium-based fuels that made it the predominant nuclear fuel type for extant nuclear power. However, following the recent concerns about the extent and availability of uranium resources, thorium-based fuels have regained significant interest worldwide. Thorium is more abundant than uranium and can be readily exploited in many countries and thus is now seen as a possible alternative. As thorium-based fuel technologies mature, fuel conversion from uranium to thorium is expected to become a major interest in both thermal and fast reactors. In this study the feasibility of fuel conversion in a fast reactor is assessed and several possible approaches are proposed. The analyses are performed using the Advanced Fast Reactor (AFR-100) design, a fast reactor core concept recently developed by ANL. The AFR-100 is a small 100 MW{sub e} reactor developed under the US-DOE program relying on innovative fast reactor technologies and advanced structural and cladding materials. It was designed to be inherently safe and offers sufficient margins with respect to the fuel melting temperature and the fuel-cladding eutectic temperature when using U-10Zr binary metal fuel. Thorium-based metal fuel was preferred to other thorium fuel forms because of its higher heavy metal density and it does not need to be alloyed with zirconium to reduce its radiation swelling. The various approaches explored cover the use of pure thorium fuel as well as the use of thorium mixed with transuranics (TRU). Sensitivity studies were performed for the different scenarios envisioned in order to determine the

Unique spectrum of SPAST variants in Estonian HSP patients: presence of benign missense changes but lack of exonic rearrangements

Directory of Open Access Journals (Sweden)

Gross-Paju Katrin

2010-03-01

Full Text Available Abstract Background Hereditary spastic paraplegia (HSP is a clinically and genetically heterogeneous disorder that can be an autosomal-dominant, autosomal-recessive, or X-linked disease. The most common autosomal-dominant form of the disease derives from mutations in the SPAST gene. Methods The aim of this study was to analyze 49 patients diagnosed with HSP from the Estonian population for sequence variants of the SPAST gene and to describe the associated phenotypes. Healthy control individuals (n = 100 with no family history of HSP were also analyzed. All patient samples were screened using denaturing high performance liquid chromatography (DHPLC and multiplex ligation-dependent probe amplification (MLPA assay. Samples with abnormal DHPLC and MLPA profiles were sequenced, with the same regions sequenced in control samples. Results Sequence variants of SPAST were identified in 19/49 HSP patients (38.8%, twelve among them had pathogenic mutations. Within the latter group there was one sporadic case. Eight patients had pure, and four - complex HSP. The twelve variants were identified: seven pathogenic (c.1174-1G>C, c.1185delA, c.1276C>T, c.1352_1356delGAGAA, c.1378C>A, c.1518_1519insTC, c.1841_1842insA and five non-pathogenic (c.131C>T, c.484G>A, c.685A>G, c.1245+202delG, c.1245+215G>C. Only 2 of these mutations had previously been described (c.131C>T, c.1245+202delG. Three mutations, c.1174-1G>C, c.1276 C>T, c.1378C>A, showed intrafamilial segregation. Conclusion This study identified new variants of the SPAST gene which included benign missense variants and short insertions/deletions. No large rearrangements were found. Based on these data, 7 new pathogenic variants of HSP are associated with clinical phenotypes.

40 CFR 600.206-93 - Calculation and use of fuel economy values for gasoline-fueled, diesel-fueled, electric, alcohol...

Science.gov (United States)

2010-07-01

... EMISSIONS OF MOTOR VEHICLES Fuel Economy Regulations for 1977 and Later Model Year Automobiles-Procedures... equivalent petroleum-based fuel economy value exists for an electric vehicle configuration, all values for... values for gasoline-fueled, diesel-fueled, electric, alcohol-fueled, natural gas-fueled, alcohol dual...

Overview of the CANDU fuel handling system for advanced fuel cycles

International Nuclear Information System (INIS)

Koivisto, D.J.; Brown, D.R.

1997-01-01

Because of its neutron economies and on-power re-fuelling capabilities the CANDU system is ideally suited for implementing advanced fuel cycles because it can be adapted to burn these alternative fuels without major changes to the reactor. The fuel handling system is adaptable to implement advanced fuel cycles with some minor changes. Each individual advanced fuel cycle imposes some new set of special requirements on the fuel handling system that is different from the requirements usually encountered in handling the traditional natural uranium fuel. These changes are minor from an overall plant point of view but will require some interesting design and operating changes to the fuel handling system. Some preliminary conceptual design has been done on the fuel handling system in support of these fuel cycles. Some fuel handling details were studies in depth for some of the advanced fuel cycles. This paper provides an overview of the concepts and design challenges. (author)

BWR fuel performance

International Nuclear Information System (INIS)

Baily, W.E.; Armijo, J.S.; Jacobson, J.; Proebstle, R.A.

1979-01-01

The General Electric experience base on BWR fuel includes over 29,000 fuel assemblies which contain 1,600,000 fuel rods. Over the last five years, design, process and operating changes have been introduced which have had major effects in improving fuel performance. Monitoring this fuel performance in BWRs has been accomplished through cooperative programs between GE and utilities. Activities such as plant fission product monitoring, fuel sipping and fuel and channel surveillance programs have jointly contributed to the value of this extensive experience base. The systematic evaluation of this data has established well-defined fuel performance trends which provide the assurance and confidence in fuel reliability that only actual operating experience can provide

Fuel Cycle Concept with Advanced METMET and Composite Fuel in LWRs

International Nuclear Information System (INIS)

Savchenko, A.; Skupov, M.; Vatulin, A.; Glushenkov, A.; Kulakov, G.; Lipkina, K.

2014-01-01

The basic factor that limits the serviceability of fuel elements developing in the framework of RERTR Program (transition from HEU to LEU fuel of research reactors) is interaction between U10Mo fuel and aluminium matrix . Interaction results in extra swelling of fuels, disappearance of a heat conducting matrix, a temperature rise in the fuel centre, penetration porosity, etc. Several methods exist to prevent fuel-matrix interaction. In terms of simplifying fuel element fabrication technology and reducing interaction, doping of fuel is the most optimal version

Nuclear-fuel-cycle costs. Consolidated Fuel-Reprocessing Program

International Nuclear Information System (INIS)

Burch, W.D.; Haire, M.J.; Rainey, R.H.

1981-01-01

The costs for the back-end of the nuclear fuel cycle, which were developed as part of the Nonproliferation Alternative Systems Assessment Program (NASAP), are presented. Total fuel-cycle costs are given for the pressurized-water reactor once-through and fuel-recycle systems, and for the liquid-metal fast-breeder-reactor system. These calculations show that fuel-cycle costs are a small part of the total power costs. For breeder reactors, fuel-cycle costs are about half that of the present once-through system. The total power cost of the breeder-reactor system is greater than that of light-water reactor at today's prices for uranium and enrichment

Nuclear fuel production

International Nuclear Information System (INIS)

Randol, A.G.

1985-01-01

The production of new fuel for a power plant reactor and its disposition following discharge from the power plant is usually referred to as the ''nuclear fuel cycle.'' The processing of fuel is cyclic in nature since sometime during a power plant's operation old or ''depleted'' fuel must be removed and new fuel inserted. For light water reactors this step typically occurs once every 12-18 months. Since the time required for mining of the raw ore to recovery of reusable fuel materials from discharged materials can span up to 8 years, the management of fuel to assure continuous power plant operation requires simultaneous handling of various aspects of several fuel cycles, for example, material is being mined for fuel to be inserted in a power plant 2 years into the future at the same time fuel is being reprocessed from a discharge 5 years prior. Important aspects of each step in the fuel production process are discussed

Pärt, Arvo: "Litany" / Barry Witherden

Index Scriptorium Estoniae

Witherden, Barry

1996-01-01

Uuest heliplaadist "Pärt, Arvo: "Litany". Litany. Psalom. Trisagion. The Hilliard Ensemble, Tallinn Chamber Orchestra, Estonian Philharmonic Chamber Orchestra, Estonian Philharmonic Chamber Choir, Tõnu Kaljuste. Orchestre de chambre de Lituanie, Saulius Sondeckis". ECM New Series ECM 1592, distribution Polygram 449 810-2 (CD:158F)

Proceedings of fuel strategies for conventional and unconventional fuels

International Nuclear Information System (INIS)

Mahr, D.; Nechvatal, T.T.

1991-01-01

Fuel selection is a major decision for a power engineer. It is the single largest item in the power plant operating budget and has a major effect on power plant economics. Fuel determines plant design requirements and the types of systems that are provided. As a result, it affects capital budgets and financing requirements. In the last few decades, we have seen different fuels of choice at any one time. Coal has always been a staple for power generation. During the 1950s and 1960s, oil became an attractive alternative. Nuclear fuel became a popular choice due to its very low energy cost. After Three-Mile-Island, however, capital budgets went through the roof, resulting in severe financial constraints. Natural gas, which was rationed in some regions a few years ago, is now a popular choice. Some sources predict that its cost will increase faster than other fuels. To mitigate the relative variations in energy cost for different fuels, a balanced energy plan is required. A balanced power generation plan with fuel options provides the flexibility to react to unpredictable changes. The papers in this book are a continuation of the Fuel Strategies theme. Three technical topics are covered: Converting to Orimulsion, A Replacement Fuel for Heavy Oil; Innovations in Handling Conventional and Unconventional Fuels for Power Plants; and Pacific Rim Experience With Coal

Containing method for spent fuel and spent fuel containing vessel

International Nuclear Information System (INIS)

Maekawa, Hiromichi; Hanada, Yoshine.

1996-01-01

Upon containing spent fuels, a metal vessel main body and a support spacer having fuel containing holes are provided. The support spacer is disposed in the inside of the metal vessel main body, and spent fuel assemblies are loaded in the fuel containing holes. Then, a lid is welded at the opening of the metal vessel main body to provide a sealing state. In this state, heat released from the spent fuel assemblies is transferred to the wall of the metal vessel main body via the support spacer. Since the support spacer has a greater heat conductivity than gases, heat of the spent fuel assemblies tends to be released to the outside, thereby capable of removing heat of the spent fuel assemblies effectively. In addition, since the surfaces of the spent fuel assemblies are in contact with the inner surface of the fuel containing holes of the support spacer, impact-resistance and earthquake-resistance are ensured, and radiation from the spent fuel assemblies is decayed by passing through the layer of the support spacer. (T.M.)

Fuel assembly

International Nuclear Information System (INIS)

Ueda, Makoto; Ogiya, Shunsuke.

1989-01-01

For improving the economy of a BWR type reactor by making the operation cycle longer, the fuel enrichment degree has to be increased further. However, this makes the subcriticality shallower in the upper portion of the reactor core, to bring about a possibility that the reactor shutdown becomes impossible. In the present invention, a portion of fuel rod is constituted as partial length fuel rods (P-fuel rods) in which the entire stack length in the effective portion is made shorter by reducing the concentration of fissionable materials in the axial portion. A plurality of moderator rods are disposed at least on one diagonal line of a fuel assembly and P-fuel rods are arranged at a position put between the moderator rods. This makes it possible to reactor shutdown and makes the axial power distribution satisfactory even if the fuel enrichment degree is increased. (T.M.)

Fuel Services

International Nuclear Information System (INIS)

Silberstein, A.

1982-09-01

FRAGEMA has developed most types of inspection equipments to work on irradiated fuel assemblies and on single fuel rods during reactor outages with an efficiency compatible with the utilities operating priorities. In order to illustrate this statement, two specific examples of inspection equipments are shortly described: the on-site removable fuel rod assembly examination stand, and the fuel assembly multiple examination device. FRAGEMA has developed techniques for the identifiction of the leaking fuel rods in the fuel assembly and the tooling necessary to perform the replacement of the faulted element. These examples of methods, techniques and equipments described and the experience accumulated through their use allow FRAGEMA to qualify for offering the supply of the corresponding software, hardware or both whenever an accurate understanding of the fuel behaviour is necessary and whenever direct intervention on the assembly and associated components is necessary due to safety, operating or economical reasons

Reactor fueling system

International Nuclear Information System (INIS)

Hattori, Noriaki; Hirano, Haruyoshi.

1983-01-01

Purpose: To optimally position a fuel catcher by mounting a television camera to a fuel catching portion and judging video images by the use of a computer or the like. Constitution: A television camera is mounted to the lower end of a fuel catching mechanism for handling nuclear fuels and a fuel assembly disposed within a reactor core or a fuel storage pool is observed directly from above to judge the position for the fuel assembly by means of video signals. Then, the relative deviation between the actual position of the fuel catcher and that set in a memory device is determined and the positional correction is carried out automatically so as to reduce the determined deviation to zero. This enables to catch the fuel assembly without failure and improves the efficiency for the fuel exchange operation. (Moriyama, K.)

Nuclear fuel elements

International Nuclear Information System (INIS)

Nakai, Keiichi

1983-01-01

Purpose: To decrease the tensile stresses resulted in a fuel can as well as prevent decladding of fuel pellets into the bore holes by decreasing the inner pressure within the nuclear fuel element. Constitution: A fuel can is filled with hollow fuel pellets, inserted with a spring for retaining the hollow fuel pellets with an appropriate force and, thereafter, closely sealed at the both ends with end plugs. A cylindrical body is disposed into the bore holes of the hollow fuel pellets. Since initial sealing gases and/or gaseous nuclear fission products can thus be excluded from the bore holes where the temperature is at the highest level, the inner pressure of the nuclear fuel element can be reduced to decrease the tensile strength resulted to the fuel can. Furthermore, decladding of fuel pellets into the bore holes can be prevented. (Moriyama, K.)

Recent IAEA activities on CANDU-PHWR fuels and fuel cycles

International Nuclear Information System (INIS)

Inozemtsev, V.; Ganguly, C.

2005-01-01

Pressurized Heavy Water Reactors (PHWR), widely known as CANDU, are in operation in Argentina, Canada, China, India, Pakistan, Republic of Korea and Romania and account for about 6% of the world's nuclear electricity production. The CANDU reactor and its fuel have several unique features, like horizontal calandria and coolant tubes, on-power fuel loading, thin-walled collapsible clad coated with graphite on the inner surface, very high density (>96%TD) natural uranium oxide fuel and amenability to slightly enriched uranium oxide, mixed uranium plutonium oxide (MOX), mixed thorium plutonium oxide, mixed thorium uranium (U-233) oxide and inert matrix fuels. Several Technical Working Groups (TWG) of IAEA periodically discuss and review CANDU reactors, its fuel and fuel cycle options. These include TWGs on water-cooled nuclear power reactor Fuel Performance and Technology (TWGFPT), on Nuclear Fuel Cycle Options and spent fuel management (TWGNFCO) and on Heavy Water Reactors (TWGHWR). In addition, IAEA-INPRO project also covers Advanced CANDU Reactors (ACR) and DUPIC fuel cycles. The present paper summarises the Agency's activities in CANDU fuel and fuel cycle, highlighting the progress during the last two years. In the past we saw HWR and LWR technologies and fuel cycles separate, but nowadays their interaction is obviously growing, and their mutual influence may have a synergetic character if we look at the world nuclear fuel cycle as at an integrated system where the both are important elements in line with fast neutron, gas cooled and other advanced reactors. As an international organization the IAEA considers this challenge and makes concrete steps to tackle it for the benefit of all Member States. (author)

LPG fuel

International Nuclear Information System (INIS)

Dagnas, F.X.; Jeuland, N.; Fouquet, J.P.; Lauraire, S.; Coroller, P.

2005-01-01

LPG fuel has become frequently used through a distribution network with 2 000 service stations over the French territory. LPG fuel ranks number 3 world-wide given that it can be used on individual vehicles, professional fleets, or public transport. What is the environmental benefit of LPG fuel? What is the technology used for these engines? What is the current regulation? Government commitment and dedication on support to promote LPG fuel? Car makers projects? Actions to favour the use of LPG fuel? This article gathers 5 presentations about this topic given at the gas conference

Spent fuel management and closed nuclear fuel cycle

International Nuclear Information System (INIS)

Kudryavtsev, E.G.

2012-01-01

Strategic objectives set by Rosatom Corporation in the field of spent fuel management are given. By 2030, Russia is to create technological infrastructure for innovative nuclear energy development, including complete closure of the nuclear fuel cycle. A target model of the spent NPP nuclear fuel management system until 2030 is analyzed. The schedule for key stages of putting in place the infrastructure for spent NPP fuel management is given. The financial aspect of the problem is also discussed [ru

Nuclear fuels and development of nuclear fuel elements

International Nuclear Information System (INIS)

Sundaram, C.V.; Mannan, S.L.

1989-01-01

Safe, reliable and economic operation of nuclear fission reactors, the source of nuclear power at present, requires judicious choice, careful preparation and specialised fabrication procedures for fuels and fuel element structural materials. These aspects of nuclear fuels (uranium, plutonium and their oxides and carbides), fuel element technology and structural materials (aluminium, zircaloy, stainless steel etc.) are discussed with particular reference to research and power reactors in India, e.g. the DHRUVA research reactor at BARC, Trombay, the pressurised heavy water reactors (PHWR) at Rajasthan and Kalpakkam, and the Fast Breeder Test Reactor (FBTR) at Kalpakkam. Other reactors like the gas-cooled reactors operating in UK are also mentioned. Because of the limited uranium resources, India has opted for a three-stage nuclear power programme aimed at the ultimate utilization of her abundant thorium resources. The first phase consists of natural uranium dioxide-fuelled, heavy water-moderated and cooled PHWR. The second phase was initiated with the attainment of criticality in the FBTR at Kalpakkam. Fast Breeder Reactors (FBR) utilize the plutonium and uranium by-products of phase 1. Moreover, FBR can convert thorium into fissile 233 U. They produce more fuel than is consumed - hence, the name breeders. The fuel parameters of some of the operating or proposed fast reactors in the world are compared. FBTR is unique in the choice of mixed carbides of plutonium and uranium as fuel. Factors affecting the fuel element performance and life in various reactors e.g. hydriding of zircaloys, fuel pellet-cladding interaction etc. in PHWR and void swelling; irradiation creep and helium embrittlement of fuel element structural materials in FBR are discussed along with measures to overcome some of these problems. (author). 15 refs., 9 tabs., 23 figs

Automobile Buyer Decisions about Fuel Economy and Fuel Efficiency

OpenAIRE

Kurani, Ken; Turrentine, Thomas

2004-01-01

Much prior research into consumer automotive and fuel purchase behaviors and fuel economy has been shaped by the normative assumptions of economics. Among these assumptions are that consumers should pay attention to costs of fuel and that they are aware of their options to save on fuel over long periods of time, i.e., the life of a vehicle or at least their period of ownership. For example, researchers have analyzed in some depth consumer choices for more fuel economical vehicles in the 1980s...

Development of PEM fuel cell technology at international fuel cells

Energy Technology Data Exchange (ETDEWEB)

Wheeler, D.J.

1996-04-01

The PEM technology has not developed to the level of phosphoric acid fuel cells. Several factors have held the technology development back such as high membrane cost, sensitivity of PEM fuel cells to low level of carbon monoxide impurities, the requirement to maintain full humidification of the cell, and the need to pressurize the fuel cell in order to achieve the performance targets. International Fuel Cells has identified a hydrogen fueled PEM fuel cell concept that leverages recent research advances to overcome major economic and technical obstacles.

Thermochemical aspects of fuel-cladding and fuel-coolant interactions in LMFBR oxide fuel pins

International Nuclear Information System (INIS)

Adamson, M.G.; Aitken, E.A.; Caputi, R.W.; Potter, P.E.; Mignanelli, M.A.

1979-01-01

This paper examines several thermochemical aspects of the fuel-cladding, fuel-coolant and fuel-fission product interactions that occur in LMFBR austenitic stainless steel-clad mixed (U,Pu)-oxide fuel pins during irradiation under normal operating conditions. Results are reported from a variety of high temperature EMF cell experiments in which continuous oxygen activity measurements on reacting and equilibrium mixtures of metal oxides and (excess) liquid alkali metal (Na, K, Cs) were performed. Oxygen potential and 0:M thresholds for Na-fuel reactions are re-evaluated in the light of new measurements and newly-assessed thermochemical data, and the influence on oxygen potential of possible U-Pu segregation between oxide and urano-plutonate (equilibrium) phases has been analyzed. (orig./RW) [de

Fuel charging machine

International Nuclear Information System (INIS)

Uchikawa, Sadao.

1978-01-01

Purpose: To enable continuous fuel discharging and charging steps in a bwr type reactor by effecting positioning only for once by providing a plurality of fuel assembly grippers and their drives co-axially on a rotatable surface. Constitution: A plurality of fuel assembly grippers and their drives are provided co-axially on a rotatable surface. For example, a gripper A, a drive B, a gripper C and a drive D are arranged co-axially in symmetric positions on a disk rotated on rails by wheels and rotational drives. A new fuel in a fuel pool is gripped by the gripper A and transported above the reactor core. Then, the disk is positioned so that the gripper C can grip the spent fuel in the core, and the fuel to be discharged is gripped and raised by the gripper C. Then the disk is rotated by 180 0 and the new fuel in the gripper A is charged into the position from which the old fuel has been discharged and, finally, the discharged fuel is sent to the fuel pool for storage. (Seki, T.)

Alternative Fuels

Science.gov (United States)

Alternative fuels include gaseous fuels such as hydrogen, natural gas, and propane; alcohols such as ethanol, methanol, and butanol; vegetable and waste-derived oils; and electricity. Overview of alternative fuels is here.

Elongated fuel road

International Nuclear Information System (INIS)

Williams, A.E.; Linkison, W.S.

1977-01-01

A fuel rod is proposed where a reorientation of the fuel in case of a considerable temperature increase, causing the melting of the densified fuel powder, will be avoided. For this purpose, in longitudinal direction of the fuel rod, a number of diameter reductions of the can are applied of certain distances. In the reduction zone the cross-sectional area of the fuel is reduced, as compared to the one of the remaining fuel material in the regions without diameter reduction, but not the density of the fuel. The recess is chosen to that in case of melting of the fuel in the center of the not contracted zone the fuel in the center of the narrowed area will remain solid and keep the molten material in position. (HR) [de

Blending Biodiesel in Fishing Boat Fuels for Improved Fuel Characteristics

International Nuclear Information System (INIS)

Lin, Cherng-Yuan

2014-01-01

Biodiesel is a renewable, clean, alternative energy source with advantages, such as excellent lubricity, superior biodegradability, and high combustion efficiency. Biodiesel is considered for mixing with fishing boat fuels to adjust their fuel characteristics so that toxic pollutants and greenhouse-effect gas emissions from such shipping might be reduced. The effects of blending fishing boat fuels A and B with various weight proportions of biodiesel are experimentally investigated in this study. The results show that biodiesel blending can significantly improve the inferior fuel properties of both fishing boat fuels and particularly fuel B. The flash points of both of these fuels increases significantly with the addition of biodiesel and thus enhances the safety of transporting and storing these blended fuels. The flash point of fishing boat fuel B even increases by 16% if 25 wt.% biodiesel is blended. The blending of biodiesel with no sulfur content is found to be one of the most effective ways to reduce the high sulfur content of fishing boat fuel, resulting in a reduction in the emission of sulfur oxides. The addition of only 25 wt.% biodiesel decreased the sulfur content of the fishing boat fuel by 37%. The high kinematic viscosity of fishing boat fuel B was also observed to be reduced by 63% with the blending of just 25 wt.% biodiesel. However, biodiesel blending caused a slight decrease in heating value around 1–4.5%.

Blending Biodiesel in Fishing Boat Fuels for Improved Fuel Characteristics

Energy Technology Data Exchange (ETDEWEB)

Lin, Cherng-Yuan, E-mail: lin7108@ntou.edu.tw [Department of Marine Engineering, National Taiwan Ocean University, Keelung, Taiwan (China)

2014-02-24

Biodiesel is a renewable, clean, alternative energy source with advantages, such as excellent lubricity, superior biodegradability, and high combustion efficiency. Biodiesel is considered for mixing with fishing boat fuels to adjust their fuel characteristics so that toxic pollutants and greenhouse-effect gas emissions from such shipping might be reduced. The effects of blending fishing boat fuels A and B with various weight proportions of biodiesel are experimentally investigated in this study. The results show that biodiesel blending can significantly improve the inferior fuel properties of both fishing boat fuels and particularly fuel B. The flash points of both of these fuels increases significantly with the addition of biodiesel and thus enhances the safety of transporting and storing these blended fuels. The flash point of fishing boat fuel B even increases by 16% if 25 wt.% biodiesel is blended. The blending of biodiesel with no sulfur content is found to be one of the most effective ways to reduce the high sulfur content of fishing boat fuel, resulting in a reduction in the emission of sulfur oxides. The addition of only 25 wt.% biodiesel decreased the sulfur content of the fishing boat fuel by 37%. The high kinematic viscosity of fishing boat fuel B was also observed to be reduced by 63% with the blending of just 25 wt.% biodiesel. However, biodiesel blending caused a slight decrease in heating value around 1–4.5%.

Fuel Cell and Hydrogen Technologies Program | Hydrogen and Fuel Cells |

Science.gov (United States)

NREL Fuel Cell and Hydrogen Technologies Program Fuel Cell and Hydrogen Technologies Program Through its Fuel Cell and Hydrogen Technologies Program, NREL researches, develops, analyzes, and validates fuel cell and hydrogen production, delivery, and storage technologies for transportation

Canadian CANDU fuel development program and recent fuel operating experience

International Nuclear Information System (INIS)

Lau, J.H.K.; Inch, W.W.R.; Cox, D.S.; Steed, R.G.; Kohn, E.; Macici, N.N.

1999-01-01

This paper reviews the performance of the CANDU fuel in the Canadian CANDU reactors in 1997 and 1998. The operating experience demonstrates that the CANDU fuel has performed very well. Over the 2-year period, the fuel-bundle defect rate for all bundles irradiated in the Canadian CANDU reactors has remained very low, at between 0.006% to 0.016%. On a fuel element basis, this represents an element defect rate of less than about 0.0005%. One of the reasons for the good fuel performance is the support provided by the Canadian fuel research and development programs. These programs address operational issues and provide evolutionary improvements to the fuel products. The programs consist of the Fuel Technology Program, funded by the CANDU Owners Group, and the Advanced Fuel and Fuel Cycles Technology Program, funded by Atomic Energy of Canada Ltd. These 2 programs, which have been in place for many years, complement each other by sharing expert resources and experimental facilities. This paper describes the programs in 1999/2000, to provide an overview of the scope of the programs and the issues that these programs address. (author)

Safe handling of renewable fuels and fuel mixtures

Energy Technology Data Exchange (ETDEWEB)

Wilen, C; Rautalin, A [VTT Energy, Espoo (Finland)

1997-12-01

VTT Energy has for several years carried out co-operation with many European research institutes on contractional basis on safety issues of fuels handling. A two-year co-operational project between VTT Energy and these research institutes was started in EU`s JOULE 3 programme in 1996, the total budget of which is 6.9 million FIM. Dust explosion testing method for `difficult` fuels, and for tests at elevated pressures and temperatures, will be developed in the task `Safe handling of renewable fuels and fuel mixtures`. Self- ignition and dust-explosion characteristics will be generated for wood and agro-biomass based biomasses and for the mixtures of them and coal. Inertization requirements will be studied, and the quenching method, combined with partial inertization, will be tested in 1.0 m{sup 3} test equipment. The ignition properties of the fuels under normal and elevated pressures will be characterised with thermobalances. The self-ignition tests with wood and forest residue dusts at 25 bar pressure have been carried out as scheduled. In addition to this, several fuels have undergone thermobalance tests, sieve analyses and microscopic studies for the characterisation of the fuels

Tobias, Rudolf: Jonah's Mission / Warrack, John

Index Scriptorium Estoniae

Warrack, John

1996-01-01

Uuest heliplaadist "Tobias, Rudolf: Jonah's Mission. Pille Lill (sop), Urve Tauts (mez), Peter Svensson (ten), Raimo Laukka (bar), Mati Palm (bass); Tallinn Boys' Choir, Estonian Philharmonic Chamber Choir, Oratorio Choir, Estonian State Symphony Orchestra, Neeme Järvi" BIS CD 731/2 (two discs: 114 minutes: DDD)

Leak testing fuel stored in the ICPP fuel storage basin

International Nuclear Information System (INIS)

Lee, J.L.; Rhodes, D.W.

1977-06-01

Irradiated fuel to be processed at the Idaho Chemical Processing Plant is stored under water at the CPP-603 Fuel Storage Facility. Leakage of radionuclides through breaks in the cladding of some of the stored fuels contaminates the water with radionuclides resulting in radiation exposure to personnel during fuel handling operations and contamination of the shipping casks. A leak test vessel was fabricated to test individual fuel assemblies which were suspected to be leaking. The test equipment and procedures are described. Test results demonstrated that a leaking fuel element could be identified by this method; of the eleven fuel assemblies tested, six were estimated to be releasing greater than 0.5 Ci total radionuclides/day to the basin water

Nonlinear analyses of spent-fuel racks for consolidated fuel loading

International Nuclear Information System (INIS)

Kabir, A.F.; Godha, P.C.; Malik, L.E.; Bolourchi, S.

1987-01-01

Storage racks for spent-fuel assemblies in nuclear power plants are designed to withstand various combinations of loads generated by gravity, seismic, thermal, and accidental fuel drops. Due to the need for storing increased amounts of spent fuel in the existing fuel pools, many nuclear power utilities are evaluating existing fuel racks to safely carry the additional loads. The current study presents the seismic analyses of existing fuel racks of Northeast Utility Company's Millstone Unit Number 1 (BWR Mark I) nuclear plant to accommodate a 2:1 fuel consolidation. This objective requires rigorous nonlinear analyses to establish the full available capacities of the racks and thereby avoid expensive modifications or minimize any needed upgrades

Considerations for handling failed fuel at the Barnwell Nuclear Fuel Plant

International Nuclear Information System (INIS)

Anderson, R.T.; Cholister, R.J.

1982-05-01

The impact of failed fuel receipt on reprocessing operations is qualitatively described. It appears that extended storage of fuel, particularly with advanced storage techniques, will increase the quantity of failed fuel, the nature and possibly the configuration of the fuel. The receipt of failed fuel at the BNFP increases handling problems, waste volumes, and operator exposure. If it is necessary to impose special operating precautions to minimize this impact, a loss in plant throughput will result. Hence, ideally, the reprocessing plant operator would take every reasonable precaution so that no failed fuel is received. An alternative policy would be to require that failed fuel be placed in a sealed canister. In the latter case the canister must be compatible with the shipping cask and suitable for in-plant storage. A required inspection of bare fuel would be made at the reactor prior to shipping off-site. This would verify fuel integrity. These requirements are obviously idealistic. Due to the current uncertain status of reprocessing and the need to keep reactors operating, business or governmental policy may be enacted resulting in the receipt of a negotiated quantity of non-standard fuel (including failed fuel). In this situation, BNFP fuel receiving policy based soley on fuel cladding integrity would be difficult to enforce. There are certain areas where process incompatibility does exist and where a compromise would be virtually impossible, e.g., canned fuel for which material or dimensional conflicts exist. This fuel would have to be refused or the fuel would require recanning prior to shipment. In other cases, knowledge of the type and nature of the failure may be acceptable to the operator. A physical inspection of the fuel either before shipment or after the cask unloading operation would be warranted. In this manner, concerns with pool contamination can be identified and the assembly canned if deemed necessary

Fuel cycles with high fuel burn-up: analysis of reactivity coefficients

International Nuclear Information System (INIS)

Kryuchkov, E.F.; Shmelev, A.N.; Ternovykh, M.J.; Tikhomirov, G.V.; Jinhong, L.; Saito, M.

2003-01-01

Fuel cycles of light-water reactors (LWR) with high fuel burn-up (above 100 MWd/kg), as a rule, involve large amounts of fissionable materials. It leads to forming the neutron spectrum harder than that in traditional LWR. Change of neutron spectrum and significant amount of non-traditional isotopes (for example, 237 Np, 238 Pu, 231 Pa, 232 U) in such fuel compositions can alter substantially reactivity coefficients as compared with traditional uranium-based fuel. The present work addresses the fuel cycles with high fuel burn-up which are based on Th-Pa-U and U-Np-Pu fuel compositions. Numerical analyses are carried out to determine effective neutron multiplication factor and void reactivity coefficient (VRC) for different values of fuel burn-up and different lattice parameters. The algorithm is proposed for analysis of isotopes contribution to these coefficients. Various ways are considered to upgrade safety of nuclear fuel cycles with high fuel burn-up. So, the results obtained in this study have demonstrated that: -1) Non-traditional fuel compositions developed for achievement of high fuel burn-up in LWR can possess positive values of reactivity coefficients that is unacceptable from the reactor operation safety point of view; -2) The lattice pitch of traditional LWR is not optimal for non-traditional fuel compositions, the increased value of the lattice pitch leads to larger value of initial reactivity margin and provides negative VRC within sufficiently broad range of coolant density; -3) Fuel burn-up has an insignificant effect on VRC dependence on coolant density, so, the measures undertaken to suppress positive VRC of fresh fuel will be effective for partially burnt-up fuel compositions also and; -4) Increase of LWR core height and introduction of additional moderators into the fuel lattice can be used as the ways to reach negative VRC values for full range of possible coolant density variations

Nuclear-fuel-cycle education: Module 5. In-core fuel management

International Nuclear Information System (INIS)

Levine, S.H.

1980-07-01

The purpose of this project was to develop a series of educational modules for use in nuclear-fuel-cycle education. These modules are designed for use in a traditional classroom setting by lectures or in a self-paced, personalized system of instruction. This module on in-core fuel management contains information on computational methods and theory; in-core fuel management using the Virginia Polytechnic Institute and State University computer modules; pressurized water reactor in-core fuel management; boiling water reactor in-core fuel management; and in-core fuel management for gas-cooled and fast reactors

A fuel cycle cost study with HEU and LEU fuels

International Nuclear Information System (INIS)

Matos, J.E.; Freese, K.E.

1985-01-01

Fuel cycle costs are compared for a range of 235 U loadings with HEU and LEU fuels using the IAEA generic 10 MW reactor as an example. If LEU silicide fuels are successfully demonstrated and licensed, the results indicate that total fuel cycle costs can be about the same or lower than those with the HEU fuels that are currently used in most research reactors. (author)

A fuel cycle cost study with HEU and LEU fuels

Energy Technology Data Exchange (ETDEWEB)

Matos, J E; Freese, K E [Argonne National Laboratory, Argonne, IL (United States)

1985-07-01

Fuel cycle costs are compared for a range of {sup 235}U loadings with HEU and LEU fuels using the IAEA generic 10 MW reactor as an example. If LEU silicide fuels are successfully demonstrated and licensed, the results indicate that total fuel cycle costs can be about the same or lower than those with the HEU fuels that are currently used in most research reactors. (author)

One Country, Two Polarised Audiences: Estonia and the Deficiency of the Audiovisual Media Services Directive

Directory of Open Access Journals (Sweden)

Andres Jõesaar

2015-12-01

Full Text Available This article argues that until recent times, the Estonian media policy has mainly been interpreted as an economic issue and it did not account for the strategic need to build a comprehensive media field to serve all groups in society. This has happened despite the fact the Estonian media policy is in line with the European Union (EU media policy, which should ensure freedom of information, diversity of opinion and media pluralism. Findings of the Estonian case study show that despite these noble aims, Estonia has two radically different information fields: one for Estonian speaking audiences and one for Russian speakers. Events in Ukraine have added to the democratic media policy paradigm a question of national security. Now it is a challenge for the policy makers to unite polarised media fields and how to minimise the impact of Russian propaganda. On the EU level, one supportive measure could be a revision of the Audiovisual Media Service Directive.

Fuel Cell Electric Bus Evaluations | Hydrogen and Fuel Cells | NREL

Science.gov (United States)

Bus Evaluations Fuel Cell Electric Bus Evaluations NREL's technology validation team evaluates fuel cell electric buses (FCEBs) to provide comprehensive, unbiased evaluation results of fuel cell bus early transportation applications for fuel cell technology. Buses operate in congested areas where

Fuel Cell Manufacturing Research and Development | Hydrogen and Fuel Cells

Science.gov (United States)

| NREL Fuel Cell Manufacturing Research and Development Fuel Cell Manufacturing Research and Development NREL's fuel cell manufacturing R&D focuses on improving quality-inspection practices for high costs. A researcher monitoring web-line equipment in the Manufacturing Laboratory Many fuel cell

Fuel performance experience

International Nuclear Information System (INIS)

Sofer, G.A.

1986-01-01

The history of LWR fuel supply has been characterized by a wide range of design developments and fuel cycle cost improvements. Exxon Nuclear Company, Inc. has pursued an aggressive fuel research and development program aimed at improved fuel performance. Exxon Nuclear has introduced many design innovations which have improved fuel cycle economics and operating flexibility while fuel failures remain at very low levels. The removable upper tie plate feature of Exxon Nuclear assemblies has helped accelerate this development, enabling repeated inspections during successive plant outages. Also, this design feature has made it possible to repair damaged fuel assemblies during refueling outages, thereby minimizing the economic impact of fuel failure from all causes

Fuel transporting device

International Nuclear Information System (INIS)

Shiratori, Hirozo.

1979-01-01

Purpose: In a liquid-metal cooled reactor, to reduce the waiting time of fuel handling apparatuses and shorten the fuel exchange time. Constitution: A fuel transporting machine is arranged between a reactor vessel and an out-pile storage tank, thereby dividing the transportation line of the pot for contracting fuel and transporting the same. By assuming such a construction, the flow of fuel transportation which has heretofore been carried out through fuel transportation pipes is not limited to one direction but the take-out of fuels from the reactor and the take-in thereof from the storage tank can be carried out constantly, and much time is not required for fuel exchange. (Kamimura, M.)

Fuel assembly

International Nuclear Information System (INIS)

Bando, Masaru.

1993-01-01

As neutron irradiation progresses on a fuel assembly of an FBR type reactor, a strong force is exerted to cause ruptures if the arrangement of fuel elements is not displaced, whereas the fuel elements may be brought into direct contact with each other not by way of spacers to cause burning damages if the arrangement is displaced. In the present invention, the circumference of fuel elements arranged in a normal triangle lattice is surrounded by a wrapper tube having a hexagonal cross section, wire spacers are wound therearound, and deformable spacers are distributed to optional positions for fuel elements in the wrapper tube. Interaction between the fuel elements caused by irradiation is effectively absorbed, thereby enabling to delay the occurrence of the rupture and burning damages of the elements. (N.H.)

Fuel spacer

International Nuclear Information System (INIS)

Nishida, Koji; Yokomizo, Osamu; Kanazawa, Toru; Kashiwai, Shin-ichi; Orii, Akihito.

1992-01-01

The present invention concerns a fuel spacer for a fuel assembly of a BWR type reactor and a PTR type reactor. Springs each having a vane are disposed on the side surface of a circular cell which supports a fuel rods. A vortex streams having a vertical component are formed by the vanes in the flowing direction of a flowing channel between adjacent cylindrical cells. Liquid droplets carried by streams are deposited on liquid membrane streams flowing along the fuel rod at the downstream of the spacer by the vortex streams. In view of the above, the liquid droplets can be deposited to the fuel rod without increasing the amount of metal of the spacer. Accordingly, the thermal margin of the fuel assembly can be improved without losing neutron economy. (I.N.)

Assessment of bio-fuel options for solid oxide fuel cell applications

Science.gov (United States)

Lin, Jiefeng

Rising concerns of inadequate petroleum supply, volatile crude oil price, and adverse environmental impacts from using fossil fuels have spurred the United States to promote bio-fuel domestic production and develop advanced energy systems such as fuel cells. The present dissertation analyzed the bio-fuel applications in a solid oxide fuel cell-based auxiliary power unit from environmental, economic, and technological perspectives. Life cycle assessment integrated with thermodynamics was applied to evaluate the environmental impacts (e.g., greenhouse gas emission, fossil energy consumption) of producing bio-fuels from waste biomass. Landfill gas from municipal solid wastes and biodiesel from waste cooking oil are both suggested as the promising bio-fuel options. A nonlinear optimization model was developed with a multi-objective optimization technique to analyze the economic aspect of biodiesel-ethanol-diesel ternary blends used in transportation sectors and capture the dynamic variables affecting bio-fuel productions and applications (e.g., market disturbances, bio-fuel tax credit, policy changes, fuel specification, and technological innovation). A single-tube catalytic reformer with rhodium/ceria-zirconia catalyst was used for autothermal reformation of various heavy hydrocarbon fuels (e.g., diesel, biodiesel, biodiesel-diesel, and biodiesel-ethanol-diesel) to produce a hydrogen-rich stream reformates suitable for use in solid oxide fuel cell systems. A customized mixing chamber was designed and integrated with the reformer to overcome the technical challenges of heavy hydrocarbon reformation. A thermodynamic analysis, based on total Gibbs free energy minimization, was implemented to optimize the operating environment for the reformations of various fuels. This was complimented by experimental investigations of fuel autothermal reformation. 25% biodiesel blended with 10% ethanol and 65% diesel was determined to be viable fuel for use on a truck travelling with

Turbine combustor with fuel nozzles having inner and outer fuel circuits

Science.gov (United States)

Uhm, Jong Ho; Johnson, Thomas Edward; Kim, Kwanwoo

2013-12-24

A combustor cap assembly for a turbine engine includes a combustor cap and a plurality of fuel nozzles mounted on the combustor cap. One or more of the fuel nozzles would include two separate fuel circuits which are individually controllable. The combustor cap assembly would be controlled so that individual fuel circuits of the fuel nozzles are operated or deliberately shut off to provide for physical separation between the flow of fuel delivered by adjacent fuel nozzles and/or so that adjacent fuel nozzles operate at different pressure differentials. Operating a combustor cap assembly in this fashion helps to reduce or eliminate the generation of undesirable and potentially harmful noise.

Reforming options for hydrogen production from fossil fuels for PEM fuel cells

Energy Technology Data Exchange (ETDEWEB)

Ersoz, Atilla; Olgun, Hayati [TUBITAK Marmara Research Center, Institute of Energy, Gebze, 41470 Kocaeli (Turkey); Ozdogan, Sibel [Marmara University Faculty of Engineering, Goztepe, 81040 Istanbul (Turkey)

2006-03-09

PEM fuel cell systems are considered as a sustainable option for the future transport sector in the future. There is great interest in converting current hydrocarbon based transportation fuels into hydrogen rich gases acceptable by PEM fuel cells on-board of vehicles. In this paper, we compare the results of our simulation studies for 100kW PEM fuel cell systems utilizing three different major reforming technologies, namely steam reforming (SREF), partial oxidation (POX) and autothermal reforming (ATR). Natural gas, gasoline and diesel are the selected hydrocarbon fuels. It is desired to investigate the effect of the selected fuel reforming options on the overall fuel cell system efficiency, which depends on the fuel processing, PEM fuel cell and auxiliary system efficiencies. The Aspen-HYSYS 3.1 code has been used for simulation purposes. Process parameters of fuel preparation steps have been determined considering the limitations set by the catalysts and hydrocarbons involved. Results indicate that fuel properties, fuel processing system and its operation parameters, and PEM fuel cell characteristics all affect the overall system efficiencies. Steam reforming appears as the most efficient fuel preparation option for all investigated fuels. Natural gas with steam reforming shows the highest fuel cell system efficiency. Good heat integration within the fuel cell system is absolutely necessary to achieve acceptable overall system efficiencies. (author)

Reforming options for hydrogen production from fossil fuels for PEM fuel cells

Science.gov (United States)

Ersoz, Atilla; Olgun, Hayati; Ozdogan, Sibel

PEM fuel cell systems are considered as a sustainable option for the future transport sector in the future. There is great interest in converting current hydrocarbon based transportation fuels into hydrogen rich gases acceptable by PEM fuel cells on-board of vehicles. In this paper, we compare the results of our simulation studies for 100 kW PEM fuel cell systems utilizing three different major reforming technologies, namely steam reforming (SREF), partial oxidation (POX) and autothermal reforming (ATR). Natural gas, gasoline and diesel are the selected hydrocarbon fuels. It is desired to investigate the effect of the selected fuel reforming options on the overall fuel cell system efficiency, which depends on the fuel processing, PEM fuel cell and auxiliary system efficiencies. The Aspen-HYSYS 3.1 code has been used for simulation purposes. Process parameters of fuel preparation steps have been determined considering the limitations set by the catalysts and hydrocarbons involved. Results indicate that fuel properties, fuel processing system and its operation parameters, and PEM fuel cell characteristics all affect the overall system efficiencies. Steam reforming appears as the most efficient fuel preparation option for all investigated fuels. Natural gas with steam reforming shows the highest fuel cell system efficiency. Good heat integration within the fuel cell system is absolutely necessary to achieve acceptable overall system efficiencies.

Metallic fuel development

International Nuclear Information System (INIS)

Walters, L.C.

1987-01-01

Metallic fuels are capable of achieving high burnup as a result of design modifications instituted in the late 1960's. The gap between the fuel slug and the cladding is fixed such that by the time the fuel swells to the cladding the fission gas bubbles interconnect and release the fission gas to an appropriately sized plenum volume. Interconnected porosity thus provides room for the fuel to deform from further swelling rather than stress the cladding. In addition, the interconnected porosity allows the fuel pin to be tolerant to transient events because as stresses are generated during a transient event the fuel flows rather than applying significant stress to the cladding. Until 1969 a number of metallic fuel alloys were under development in the US. At that time the metallic fuel development program in the US was discontinued in favor of ceramic fuels. However, development had proceeded to the point where it was clear that the zirconium addition to uranium-plutonium fuel would yield a ternary fuel with an adequately high solidus temperature and good compatibility with austenitic stainless steel cladding. Furthermore, several U-Pu-Zr fuel pins had achieved about 6 at.% bu by the late 1960's, without failure, and thus the prospect for high burnup was promising

Exports of company: SWOT-analysis, product strategy and sales targets

International Nuclear Information System (INIS)

Hammer, Hele

1998-01-01

Despite its smallness Estonia has a good chance to enjoy a success in the international peat market, due to the favourable geographical location and well developed peat industry. There are numerous harbours, low wages and salaries, and a good educational background in Estonia. Moreover, Estonian economy is aiming at a competitive market economy. Peat exports represent a great opportunity to improve the balance of payments, create jobs, support the State through the taxes paid, meet the needs of foreign customers, earn a profit for Estonian peat companies and better Estonian standard of living. When preparing this paper, marketing textbooks and professional articles of interest were used. The working experience of one of Estonian peat companies and acquired practical knowledge have also been of help throughout the thesis. In general, it may be expected that Estonian peat exports will increase in the next few years. The Netherlands and Germany will remain the main target countries, also France, Belgium and the United Kingdom are important. The exports to Italy will, for sure, increase, to the Middle-East these will be quite likely. The Far East is also a potential market, especially Korea and Japan. Peat marketing is based on the following premises: the demand for peat is a derived demand, being dependent on that for the end-products. The number of customers is small and their decisions are rational. Estonian peat producers also have to face the fact that the production needs to be marketed mostly abroad. While considering the product strategy, the conclusion was that with peat the least cost strategy is easily applicable. Possibilities for differentiation are almost next to nothing (except in case of packaging or transportation services). Possibilities will widen when the production of potting soils is launched. Most Estonian peat firms sell peat and products thereof through foreign wholesalers, some of them render also transportation services and this is well

Fuel economy and range estimates for fuel cell powered automobiles

Energy Technology Data Exchange (ETDEWEB)

Steinbugler, M.; Ogden, J. [Princeton Univ., NJ (United States)

1996-12-31

While a number of automotive fuel cell applications have been demonstrated, including a golf cart, buses, and a van, these systems and others that have been proposed have utilized differing configurations ranging from direct hydrogen fuel cell-only power plants to fuel cell/battery hybrids operating on reformed methanol. To date there is no clear consensus on which configuration, from among the possible combinations of fuel cell, peaking device, and fuel type, is the most likely to be successfully commercialized. System simplicity favors direct hydrogen fuel cell vehicles, but infrastructure is lacking. Infrastructure favors a system using a liquid fuel with a fuel processor, but system integration and performance issues remain. A number of studies have analyzed particular configurations on either a system or vehicle scale. The objective of this work is to estimate, within a consistent framework, fuel economies and ranges for a variety of configurations using flexible models with the goal of identifying the most promising configurations and the most important areas for further research and development.

DIGITAL PRESERVATION OF PRINTED CULTURAL HERITAGE IN ESTONIA. STRATEGY. METHODOLOGY. PRACTICE

Directory of Open Access Journals (Sweden)

Reimo, Tiiu

2006-12-01

Full Text Available Preservation of national cultural heritage has been during the last years actively discussed both on institutional and state levels. In October 2003 the working group on digital preservation by theMinistry of Culture elaborated preservation guidelines Strategy of digital preservation of Estonian cultural heritage for years 2004–2007. The strategy is based on the principles of eEurope 2002Action Plan (2000 and Lund Principles (2001.The state strategy is aimed to achieve collaboration of different memory institutions in order to elaborate an unified view on cultural heritage and its digitisation as well as to preservation of digitally created cultural heritage. It is also important to guarantee preservation of cultural heritage and to make it accessible to the public use through the contemporary possibilities of informationand communication technologies. Digitisation and preservation of digitized heritage will be coordinated by the state. The main coordinators are the Ministry of Culture, The Ministry of Educationand Science, the State Chancellery and the National Archive.The methodology of decision making for digital preservation is based on the principles of the UNESCO programme Memory of the World. The choice of objects for digitisation is based on need and expediency that can be evaluated on the ground of acultural value of an object, conservation risks, physical condition of an object and necessity of use.In 2004–2005 metadata requirements for digital preservation were elaborated. The guidelines foresee that digitized objects will be described by four categories of metadata: administrative andtechnical metadata, metadata on access inhibitors and restrictions of use and descriptive metadata. Estonian documentary heritage is located today in different memory institutions: in state or public institutions like archives, libraries and museums, in private possession, in religious and scientific institutions and in possession of the third sector

RU fuel development program for an advanced fuel cycle in Korea

International Nuclear Information System (INIS)

Suk, Hochum; Sim, Kiseob; Kim, Bongghi; Inch, W.W.; Page, R.

1998-01-01

Korea is a unique country, having both PWR and CANDU reactors. Korea can therefore exploit the natural synergism between the two reactor types to minimize overall waste production, and maximize energy derived from the fuel, by ultimately burning the spent fuel from its PWR reactors in CANDU reactors. As one of the possible fuel cycles, Recovered Uranium (RU) fuel offers a very attractive alternative to the use of Natural Uranium (NU) and slightly enriched uranium (SEU) in CANDU reactors. Potential benefits can be derived from a number of stages in the fuel cycle: no enrichment required, therefore no enrichment tails, direct conversion to UO 2 , lower sensitivity to 234 U and 236U absorption in the CANDU reactor, and expected lower cost relative to NU and SEU. These benefits all fit well with the PWR-CANDU fuel cycle synergy. RU arising from the conventional reprocessing of European and Japanese oxide spent fuel by 2000 is projected to be approaching 25,000 te. The use of RU fuel in a CANDU 6 reactor should result in no serious radiological difficulties and no requirements for special precautions and should not require any new technologies for the fuel fabrication and handling. The use of the CANDU Flexible Fueling (CANFLEX) bundle as the carrier for RU will be fully compatible with the reactor design, current safety and operational requirements, and there will be improved fuel performance compared with the CANDU 37-element NU fuel bundle. Compared with the 37-element NU bundle, the RU fuel has significantly improved fuel cycle economics derived from increased burnups, a large reduction in both fuel requirements and spent fuel, arisings, and the potential lower cost for RU material. There is the potential for annual fuel cost savings in the range of one-third to two-thirds, with enhanced operating margins using RU in the CANFLEX bundle design. These benefits provide the rationale for justifying R and D efforts on the use of RU fuel for advanced fuel cycles in CANDU

Fuel cells 101

Energy Technology Data Exchange (ETDEWEB)

Taylor, B.

2003-06-01

A capsule history of fuel cells is given, beginning with the first discovery in 1839 by William Grove, a Welsh judge who, when experimenting with electrolysis discovered that by re-combining the two components of electrolysis (water and oxygen) an electric charge was produced. A century later, in 1958, Francis Thomas Bacon, a British scientist demonstrated the first working fuel cell stack, a technology which was licensed and used in the Apollo spacecraft. In Canada, early research on the development of fuel cells was carried out at the University of Toronto, the Defence Research Establishment and the National Research Council. Most of the early work concentrated on alkaline and phosphoric acid fuel cells. In 1983, Ballard Research began the development of the electrolyte membrane fuel cell, which marked the beginning of Canada becoming a world leader in fuel cell technology development. The paper provides a brief account of how fuel cells work, describes the distinguishing characteristics of the various types of fuel cells (alkaline, phosphoric acid, molten-carbonate, solid oxide, and proton exchange membrane types) and their principal benefits. The emphasis is on proton exchange membrane fuel cells because they are the only fuel cell technology that is appropriate for providing primary propulsion power onboard a vehicle. Since vehicles are by far the greatest consumers of fossil fuels, it follows that proton exchange membrane fuel cells will have the greatest potential impact on both environmental matters and on our reliance on oil as our primary fuel. Various on-going and planned fuel cell demonstration projects are also described. 1 fig.

Fuel pellet

International Nuclear Information System (INIS)

Hayashi, K.

1980-01-01

Fuel pellet for insertion into a cladding tube in order to form a fuel element or a fuel rod. The fuel pellet has got a belt-like projection around its essentially cylindrical lateral circumferential surface. The upper and lower edges in vertical direction of this belt-like projection are wave-shaped. The projection is made of the same material as the bulk pellet. Both are made in one piece. (orig.) [de

Oxy-fuel combustion of solid fuels

DEFF Research Database (Denmark)

Toftegaard, Maja Bøg; Brix, Jacob; Jensen, Peter Arendt

2010-01-01

Oxy-fuel combustion is suggested as one of the possible, promising technologies for capturing CO2 from power plants. The concept of oxy-fuel combustion is removal of nitrogen from the oxidizer to carry out the combustion process in oxygen and, in most concepts, recycled flue gas to lower the flame...... provide additional options for improvement of process economics are however likewise investigated. Of particular interest is the change of the combustion process induced by the exchange of carbon dioxide and water vapor for nitrogen as diluent. This paper reviews the published knowledge on the oxy......-fuel process and focuses particularly on the combustion fundamentals, i.e. flame temperatures and heat transfer, ignition and burnout, emissions, and fly ash characteristics. Knowledge is currently available regarding both an entire oxy-fuel power plant and the combustion fundamentals. However, several...

WWER-440 fuel cycles possibilities using improved fuel assemblies design

International Nuclear Information System (INIS)

Mikolas, P.; Svarny, J.

2008-01-01

Practically five years cycle has been achieved in the last years at NPP Dukovany. There are two principal means how it could be achieved. First, it is necessary to use fuel assemblies with higher fuel enrichment and second, to use fuel loading with very low leakage. Both these conditions are fulfilled at NPP Dukovany at this time. It is known, that the fuel cycle economy can be improved by increasing the fuel residence time in the core up to six years. There are at least two ways how this goal could be achieved. The simplest way is to increase enrichment in fuel. There exists a limit, which is 5.0 w % of 235 U. Taking into account some uncertainty, the calculation maximum is 4.95 w % of 235 U. The second way is to change fuel assembly design. There are several possibilities, which seem to be suitable from the neutron - physical point of view. The first one is higher mass content of uranium in a fuel assembly. The next possibility is to enlarge pin pitch. The last possibility is to 'omit' FA shroud. This is practically unrealistic; anyway, some other structural parts must be introduced. The basic neutron physical characteristics of these cycles for up-rated power are presented showing that the possibilities of fuel assemblies with this improved design in enlargement of fuel cycles are very promising. In the end, on the basis of neutron physical characteristics and necessary economical input parameters, a preliminary evaluation of economic contribution of proposals of advanced fuel assemblies on fuel cycle economy is presented (Authors)

40 CFR 80.602 - What records must be kept by entities in the NRLM diesel fuel, ECA marine fuel, and diesel fuel...

Science.gov (United States)

2010-07-01

... (CONTINUED) AIR PROGRAMS (CONTINUED) REGULATION OF FUELS AND FUEL ADDITIVES Motor Vehicle Diesel Fuel; Nonroad, Locomotive, and Marine Diesel Fuel; and ECA Marine Fuel Recordkeeping and Reporting Requirements... in the NRLM diesel fuel, ECA marine fuel, and diesel fuel additive production, importation, and...

Fuel loads and fuel type mapping

Science.gov (United States)

Chuvieco, Emilio; Riaño, David; Van Wagtendonk, Jan W.; Morsdof, Felix; Chuvieco, Emilio

2003-01-01

Correct description of fuel properties is critical to improve fire danger assessment and fire behaviour modeling, since they guide both fire ignition and fire propagation. This chapter deals with properties of fuel that can be considered static in short periods of time: biomass loads, plant geometry, compactness, etc. Mapping these properties require a detail knowledge of vegetation vertical and horizontal structure. Several systems to classify the great diversity of vegetation characteristics in few fuel types are described, as well as methods for mapping them with special emphasis on those based on remote sensing images.

Fuel Cell Technology Status Analysis | Hydrogen and Fuel Cells | NREL

Science.gov (United States)

Technology Status Analysis Fuel Cell Technology Status Analysis Get Involved Fuel cell developers interested in collaborating with NREL on fuel cell technology status analysis should send an email to NREL's Technology Validation Team at techval@nrel.gov. NREL's analysis of fuel cell technology provides objective

Fissile fuel doubling time characteristics for reactor lifetime fuel logistics

International Nuclear Information System (INIS)

Heindler, M.; Harms, A.A.

1978-01-01

The establishment of nuclear fuel requirements and their efficient utilization requires a detailed knowledge of some aspects of fuel dynamics and processing during the reactor lifetime. It is shown here that the use of the fuel stockpile inventory concept can serve effectively for this fuel management purpose. The temporal variation of the fissile fuel doubling time as well as nonequilibrium core conditions are among the characteristics which thus become more evident. These characteristics - rather than a single figure-of-merit - clearly provide an improved description of the expansion capacity and/or fuel requirements of a nuclear reactor energy system

Fuel assembly

International Nuclear Information System (INIS)

Nakajima, Akiyoshi; Bessho, Yasunori; Aoyama, Motoo; Koyama, Jun-ichi; Hirakawa, Hiromasa; Yamashita, Jun-ichi; Hayashi, Tatsuo

1998-01-01

In a fuel assembly of a BWR type reactor in which a water rod of a large diameter is disposed at the central portion, the cross sectional area perpendicular to the axial direction comprises a region a of a fuel rod group facing to a wide gap water region to which a control rod is inserted, a region b of a fuel rod group disposed on the side of the wide gap water region other than the region a, a region d of a fuel rod group facing to a narrow gap water region and a region c of a fuel rod group disposed on the side of the narrow gap water region other than the region d. When comparing an amount of fission products contained in the four regions relative to that in the entire regions and average enrichment degrees of fuel rods for the four regions, the relative amount and the average enrichment degree of the fuel rod group of the region a is minimized, and the relative amount and the average enrichment degree of the fuel rod group in the region b is maximized. Then, reactor shut down margin during cold operation can be improved while flattening the power in the cross section perpendicular to the axial direction. (N.H.)

Fuel assemblies

International Nuclear Information System (INIS)

Nagano, Mamoru; Yoshioka, Ritsuo

1983-01-01

Purpose: To effectively utilize nuclear fuels by increasing the reactivity of a fuel assembly and reduce the concentration at the central region thereof upon completion of the burning. Constitution: A fuel assembly is bisected into a central region and a peripheral region by disposing an inner channel box within a channel box. The flow rate of coolants passing through the central region is made greater than that in the peripheral region. The concentration of uranium 235 of the fuel rods in the central region is made higher. In such a structure, since the moderating effect in the central region is improved, the reactivity of the fuel assembly is increased and the uranium concentration in the central region upon completion of the burning can be reduced, fuel economy and effective utilization of uranium can be attained. (Kamimura, M.)

Fuel assembly

International Nuclear Information System (INIS)

Nakatsuka, Masafumi; Matsuzuka, Ryuji.

1976-01-01

Object: To provide a fuel assembly which can decrease pressure loss of coolant to uniform temperature. Structure: A sectional area of a flow passage in the vicinity of an inner peripheral surface of a wrapper tube is limited over the entire length to prevent the temperature of a fuel element in the outermost peripheral portion from being excessively decreased to thereby flatten temperature distribution. To this end, a plurality of pincture-frame-like sheet metals constituting a spacer for supporting a fuel assembly, which has a plurality of fuel elements planted lengthwise and in given spaced relation within the wrapper tube, is disposed in longitudinal grooves and in stacked fashion to form a substantially honeycomb-like space in cross section. The fuel elements are inserted and supported in the space to form a fuel assembly. (Kamimura, M.)

Accelerated fuel depreciation as an economic incentive for low-leakage fuel management

International Nuclear Information System (INIS)

Downar, T.J.

1986-01-01

An analysis is presented which evaluates the tax depreciation advantage which results from the increased rate of fuel depletion achieved in the current low-leakage fuel-management LWR core reload designs. An analytical fuel-cycle cost model is used to examine the important cost parameters which are then validated using the fuel-cycle cost code CINCAS and data from the Maine Yankee PWR. Results show that low-leakage fuel management, through the tax depreciation advantage from accelerated fuel depletion, provides an improvement of several percent in fuel-cycle costs compared to traditional out-in fuel management and a constant fuel depletion rate. (author)

Mõtteid ingliskeelse Juhan Liivi luulevalimiku ja nüüdisaja eesti luule antoloogia ilmumise puhul / Lauri Pilter

Index Scriptorium Estoniae

Pilter, Lauri, 1971-

2013-01-01

Arvustus: Juhan Liiv. Snow drifts, I sing: selected poems / edited by Jüri Talvet ; translated from the Estonian by Jüri Talvet and H. L. Hix. Toronto : Guernica, 2013 ; Contemporary Estonian poetry : a Baltic anthology / edited by Inara Cedrins. New Orleans : UNO Press, 2013. (The engaged writers series)

Modelling soil organic carbon concentration of mineral soils in arable lands using legacy soil data

DEFF Research Database (Denmark)

Suuster, E; Ritz, Christian; Roostalu, H

2012-01-01

is appropriate if the study design has a hierarchical structure as in our scenario. We used the Estonian National Soil Monitoring data on arable lands to predict SOC concentrations of mineral soils. Subsequently, the model with the best prediction accuracy was applied to the Estonian digital soil map...

Governance and law in transition states : [doktoritöö] / Taavi Annus ; juhendaja: Wolfgang Drechsler

Index Scriptorium Estoniae

Annus, Taavi, 1977-

2004-01-01

Sisaldab artikleid: Comparative constitutional reasoning : the law and strategy of selecting the right arguments ; Die Verfassungsentwicklung in Estland von 1992 bis 2001 ; Judicial behavior in transition : the effects of judge and defendant characteristics ; The right to health protection in the Estonian Constitution ; German authors on Estonian minority rights

Proceedings of the Water Reactor Fuel Performance Meeting - WRFPM / Top Fuel 2009

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-06-15

SFEN, ENS, SNR, ANS, AESJ, CNS KNS, IAEA and NEA are jointly organizing the 2009 International Water Reactor Fuel Performance / TopFuel 2009 Meeting following the 2008 KNS Water Reactor Performance Meeting held during October 19-23, 2008 in Seoul, Korea. This meeting is held annually on a tri-annual rotational basis in Europe, USA and Asia. In 2009, this meeting will be held in Paris, September 6-10, 2009 in coordination with the Global 2009 Conference at the same date and place. That would lead to a common opening session, some common technical presentations, a common exhibition and common social events. The technical scope of the meeting includes all aspects of nuclear fuel from fuel rod to core design as well as manufacturing, performance in commercial and test reactors or on-going and future developments and trends. Emphasis will be placed on fuel reliability in the general context of nuclear 'Renaissance' and recycling perspective. The meeting includes selectively front and/or back end issues that impact fuel designs and performance. In this frame, the conference track devoted to 'Concepts for transportation and interim storage of spent fuels and conditioned waste' will be shared with 'GLOBAL' conference. Technical Tracks: - 1. Fuel Performance, Reliability and Operational Experience: Fuel operating experience and performance; experience with high burn-up fuels; water side corrosion; stress corrosion cracking; MOX fuel performance; post irradiation data on lead fuel assemblies; radiation effects; water chemistry and corrosion counter-measures. - 2. Transient Fuel Behaviour and Safety Related Issues: Transient fuel behavior and criteria (RIA, LOCA, ATWS, Ramp tests..). Fuel safety-related issues such as PCI (pellet cladding interaction), transient fission gas releases and cladding bursting/ballooning during transient events - Advances in fuel performance modeling and core reload methodology, small and large-scale fuel testing

Proceedings of the Water Reactor Fuel Performance Meeting - WRFPM / Top Fuel 2009

International Nuclear Information System (INIS)

2009-06-01

SFEN, ENS, SNR, ANS, AESJ, CNS KNS, IAEA and NEA are jointly organizing the 2009 International Water Reactor Fuel Performance / TopFuel 2009 Meeting following the 2008 KNS Water Reactor Performance Meeting held during October 19-23, 2008 in Seoul, Korea. This meeting is held annually on a tri-annual rotational basis in Europe, USA and Asia. In 2009, this meeting will be held in Paris, September 6-10, 2009 in coordination with the Global 2009 Conference at the same date and place. That would lead to a common opening session, some common technical presentations, a common exhibition and common social events. The technical scope of the meeting includes all aspects of nuclear fuel from fuel rod to core design as well as manufacturing, performance in commercial and test reactors or on-going and future developments and trends. Emphasis will be placed on fuel reliability in the general context of nuclear 'Renaissance' and recycling perspective. The meeting includes selectively front and/or back end issues that impact fuel designs and performance. In this frame, the conference track devoted to 'Concepts for transportation and interim storage of spent fuels and conditioned waste' will be shared with 'GLOBAL' conference. Technical Tracks: - 1. Fuel Performance, Reliability and Operational Experience: Fuel operating experience and performance; experience with high burn-up fuels; water side corrosion; stress corrosion cracking; MOX fuel performance; post irradiation data on lead fuel assemblies; radiation effects; water chemistry and corrosion counter-measures. - 2. Transient Fuel Behaviour and Safety Related Issues: Transient fuel behavior and criteria (RIA, LOCA, ATWS, Ramp tests..). Fuel safety-related issues such as PCI (pellet cladding interaction), transient fission gas releases and cladding bursting/ballooning during transient events - Advances in fuel performance modeling and core reload methodology, small and large-scale fuel testing facilities. - 3. Advances in Water

UK experience on fuel and cladding interaction in oxide fuels

Energy Technology Data Exchange (ETDEWEB)

Batey, W [Dounreay Experimental Reactor Establishment, Thurso, Caithness (United Kingdom); Findlay, J R [AERE, Harwell, Didcot, Oxon (United Kingdom)

1977-04-01

The occurrence of fuel cladding interactions in fast reactor fuels has been observed in UK irradiations over a period of years. Chemical incompatibility between fuel and clad represents a potential source of failure and has, on this account, been studied using a variety of techniques. The principal fuel of interest to the UK for fast reactor application is mixed uranium plutonium oxide clad in stainless steel and it is in this field that the majority of work has been concentrated. Some consideration has been given to carbide fuels, because of their application as an advanced fuel. This experience is described in the accompanying paper. Several complementary initiatives have been followed to investigate the interactions in oxide fuel. The principal source of experimental information is from the experimental fuel irradiation programme in the Dounreay Fast Reactor (DFR). Supporting information has been obtained from irradiation programmes in Materials Testing Reactors (MTR). Conditions approaching those in a fast reactor are obtained and the effects of specific variables have been examined in specifically designed experiments. Out-of-reactor experiments have been used to determine the limits of fuel and cladding compatibility and also to give indications of corrosion The observations from all experiments have been examined in the light of thermo-dynamic predictions of fuel behaviour to assess the relative significance of various observations and operating conditions. An experimental programme to control and limit the interactions in oxide fuel is being followed.

UK experience on fuel and cladding interaction in oxide fuels

International Nuclear Information System (INIS)

Batey, W.; Findlay, J.R.

1977-01-01

The occurrence of fuel cladding interactions in fast reactor fuels has been observed in UK irradiations over a period of years. Chemical incompatibility between fuel and clad represents a potential source of failure and has, on this account, been studied using a variety of techniques. The principal fuel of interest to the UK for fast reactor application is mixed uranium plutonium oxide clad in stainless steel and it is in this field that the majority of work has been concentrated. Some consideration has been given to carbide fuels, because of their application as an advanced fuel. This experience is described in the accompanying paper. Several complementary initiatives have been followed to investigate the interactions in oxide fuel. The principal source of experimental information is from the experimental fuel irradiation programme in the Dounreay Fast Reactor (DFR). Supporting information has been obtained from irradiation programmes in Materials Testing Reactors (MTR). Conditions approaching those in a fast reactor are obtained and the effects of specific variables have been examined in specifically designed experiments. Out-of-reactor experiments have been used to determine the limits of fuel and cladding compatibility and also to give indications of corrosion The observations from all experiments have been examined in the light of thermo-dynamic predictions of fuel behaviour to assess the relative significance of various observations and operating conditions. An experimental programme to control and limit the interactions in oxide fuel is being followed

Fuel cycles with high fuel burn-up: analysis of reactivity coefficients

Energy Technology Data Exchange (ETDEWEB)

Kryuchkov, E.F.; Shmelev, A.N.; Ternovykh, M.J.; Tikhomirov, G.V.; Jinhong, L. [Moscow Engineering Physics Institute (State University) (Russian Federation); Saito, M. [Tokyo Institute of Technology (Japan)

2003-07-01

Fuel cycles of light-water reactors (LWR) with high fuel burn-up (above 100 MWd/kg), as a rule, involve large amounts of fissionable materials. It leads to forming the neutron spectrum harder than that in traditional LWR. Change of neutron spectrum and significant amount of non-traditional isotopes (for example, {sup 237}Np, {sup 238}Pu, {sup 231}Pa, {sup 232}U) in such fuel compositions can alter substantially reactivity coefficients as compared with traditional uranium-based fuel. The present work addresses the fuel cycles with high fuel burn-up which are based on Th-Pa-U and U-Np-Pu fuel compositions. Numerical analyses are carried out to determine effective neutron multiplication factor and void reactivity coefficient (VRC) for different values of fuel burn-up and different lattice parameters. The algorithm is proposed for analysis of isotopes contribution to these coefficients. Various ways are considered to upgrade safety of nuclear fuel cycles with high fuel burn-up. So, the results obtained in this study have demonstrated that: -1) Non-traditional fuel compositions developed for achievement of high fuel burn-up in LWR can possess positive values of reactivity coefficients that is unacceptable from the reactor operation safety point of view; -2) The lattice pitch of traditional LWR is not optimal for non-traditional fuel compositions, the increased value of the lattice pitch leads to larger value of initial reactivity margin and provides negative VRC within sufficiently broad range of coolant density; -3) Fuel burn-up has an insignificant effect on VRC dependence on coolant density, so, the measures undertaken to suppress positive VRC of fresh fuel will be effective for partially burnt-up fuel compositions also and; -4) Increase of LWR core height and introduction of additional moderators into the fuel lattice can be used as the ways to reach negative VRC values for full range of possible coolant density variations.

Sipping fuel and saving lives: increasing fuel economy withoutsacrificing safety

Energy Technology Data Exchange (ETDEWEB)

Gordon, Deborah; Greene, David L.; Ross, Marc H.; Wenzel, Tom P.

2007-06-11

The public, automakers, and policymakers have long worried about trade-offs between increased fuel economy in motor vehicles and reduced safety. The conclusion of a broad group of experts on safety and fuel economy in the auto sector is that no trade-off is required. There are a wide variety of technologies and approaches available to advance vehicle fuel economy that have no effect on vehicle safety. Conversely, there are many technologies and approaches available to advance vehicle safety that are not detrimental to vehicle fuel economy. Congress is considering new policies to increase the fuel economy of new automobiles in order to reduce oil dependence and reduce greenhouse gas emissions. The findings reported here offer reassurance on an important dimension of that work: It is possible to significantly increase the fuel economy of motor vehicles without compromising their safety. Automobiles on the road today demonstrate that higher fuel economy and greater safety can co-exist. Some of the safest vehicles have higher fuel economy, while some of the least safe vehicles driven today--heavy, large trucks and SUVs--have the lowest fuel economy. At an October 3, 2006 workshop, leading researchers from national laboratories, academia, auto manufacturers, insurance research industry, consumer and environmental groups, material supply industries, and the federal government agreed that vehicles could be designed to simultaneously improve safety and fuel economy. The real question is not whether we can realize this goal, but the best path to get there. The experts' studies reveal important new conclusions about fuel economy and safety, including: (1) Vehicle fuel economy can be increased without affecting safety, and vice versa; (2) Reducing the weight and height of the heaviest SUVs and pickup trucks will simultaneously increase both their fuel economy and overall safety; and (3) Advanced materials can decouple size from mass, creating important new possibilities

The Fuel Performance Analysis of LWR Fuel containing High Thermal Conductivity Reinforcements

International Nuclear Information System (INIS)

Kim, Seung Su; Ryu, Ho Jin

2015-01-01

The thermal conductivity of fuel affects many performance parameters including the fuel centerline temperature, fission gas release and internal pressure. In addition, enhanced safety margin of fuel might be expected when the thermal conductivity of fuel is improved by the addition of high thermal conductivity reinforcements. Therefore, the effects of thermal conductivity enhancement on the fuel performance of reinforced UO2 fuel with high thermal conductivity compounds should be analyzed. In this study, we analyzed the fuel performance of modified UO2 fuel with high thermal conductivity reinforcements by using the FRAPCON-3.5 code. The fissile density and mechanical properties of the modified fuel are considered the same with the standard UO2 fuel. The fuel performance of modified UO2 with high thermal conductivity reinforcements were analyzed by using the FRAPCON-3.5 code. The thermal conductivity enhancement factors of the modified fuels were obtained from the Maxwell model considering the volume fraction of reinforcements

CANDU fuel performance

International Nuclear Information System (INIS)

Ivanoff, N.V.; Bazeley, E.G.; Hastings, I.J.

1982-01-01

CANDU fuel has operated successfully in Ontario Hydro's power reactors since 1962. In the 19 years of experience, about 99.9% of all fuel bundles have performed as designed. Most defects occurred before 1979 and subsequent changes in fuel design, fuel management, reactor control, and manufacturing quality control have reduced the current defect rate to near zero. Loss of power production due to defective fuel has been negligible. The outstanding performance continues while maintaining a low unit energy cost for fuel

Repairing fuel for reinsertion

International Nuclear Information System (INIS)

Krukshenk, A.

1986-01-01

Eqiupment for nuclear reactor fuel assembly repairing produced by Westinghouse and Brawn Bovery companies is described. Repair of failed fuel assemblies replacement of defect fuel elements gives a noticeable economical effect. Thus if the cost of a new fuel assembly is 450-500 thousand dollars, the replacement of one fuel element in it costs approximately 40-60 thousand dollars. In simple cases repairing includes either removal of failed fuel elements from a fuel assembly and its reinsertion with the rest of fuel elements into the reactor core (reactor refueling), or replacement of unfailed fuel elements from one fuel assembly to a new one (fuel assembly overhaul and reconditioning)

Fuel mechanical design as a boundary condition for fuel management optimization

International Nuclear Information System (INIS)

Wunderlich, F.; Aisch, F.W.; Heins, L.

1988-01-01

The incentive to reduce fuel cycle costs as well as the amount of active waste requires, among others, measures to optimize fuel management. Improved fuel management in this sense calls, e.g., for reduction of parasitic neutron absorption, for reduction of neutron leakage, and particularly for burnup extension. Such measures result in increased demands for fuel mechanical design. In the first part of this paper their impact on fuel mechanical behaviour is described. In the second part, some examples of practical importance for the interaction between fuel management optimization and fuel mechanical design are discussed. (orig.) [de

Climate consequences of low-carbon fuels: The United States Renewable Fuel Standard

International Nuclear Information System (INIS)

Hill, Jason; Tajibaeva, Liaila; Polasky, Stephen

2016-01-01

A common strategy for reducing greenhouse gas (GHG) emissions from energy use is to increase the supply of low-carbon alternatives. However, increasing supply tends to lower energy prices, which encourages additional fuel consumption. This “fuel market rebound effect” can undermine climate change mitigation strategies, even to the point where efforts to reduce GHG emissions by increasing the supply of low-carbon fuels may actually result in increased GHG emissions. Here, we explore how policies that encourage the production of low-carbon fuels may result in increased GHG emissions because the resulting increase in energy use overwhelms the benefits of reduced carbon intensity. We describe how climate change mitigation strategies should follow a simple rule: a low-carbon fuel with a carbon intensity of X% that of a fossil fuel must displace at least X% of that fossil fuel to reduce overall GHG emissions. We apply this rule to the United States Renewable Fuel Standard (RFS2). We show that absent consideration of the fuel market rebound effect, RFS2 appears to reduce GHG emissions, but once the fuel market rebound effect is factored in, RFS2 actually increases GHG emissions when all fuel GHG intensity targets are met. - Highlights: • Low-carbon fuels partially displace petroleum via fuel market rebound effect. • Synthesis of recent analyses shows incomplete petroleum displacement by biofuels. • Fuel market rebound effect can reduce or reverse climate benefit of low-carbon fuels. • Fossil fuel displacement must exceed relative carbon footprint of a low-carbon fuel. • The Renewable Fuel Standard increases greenhouse gas emissions when mandate is met.

Fuel pattern recognition device

International Nuclear Information System (INIS)

Sato, Tomomi.

1995-01-01

The device of the present invention monitors normal fuel exchange upon fuel exchanging operation carried out in a reactor of a nuclear power plant. Namely, a fuel exchanger is movably disposed to the upper portion of the reactor and exchanges fuels. An exclusive computer receives operation signals of the fuel exchanger during operation as inputs, and outputs reactor core fuel pattern information signals to a fuel arrangement diagnosis device. An underwater television camera outputs image signals of a fuel pattern in the reactor core to an image processing device. If there is any change in the image signals for the fuel pattern as a result of the fuel exchange operation of the fuel exchanger, the image processing device outputs the change as image signals to the fuel pattern diagnosis device. The fuel pattern diagnosis device compares the pattern information signals from the exclusive computer with the image signals from the image processing device, to diagnose the result of the fuel exchange operation performed by the fuel exchanger and inform the diagnosis by means of an image display. (I.S.)

Proceedings of the 2006 International Meeting on LWR fuel performance 'Nuclear Fuel: Addressing the future' - TopFuel 2006 Transactions

International Nuclear Information System (INIS)

2006-01-01

From 22-26 October, 340 researchers, nuclear engineers and scientists from across Europe and beyond congregated in the ancient university city of Salamanca, Spain, to discuss the challenges facing the developers and manufacturers of new high-performance nuclear fuels-fuels that will help meet current and future energy demand and reduce man's over dependence upon CO 2 -emitting fossil fuels. TopFuel is an annual topical meeting organised by ENS, the American Nuclear Society and the Atomic Energy Society of Japan. This year it was co-sponsored by the IAEA, the OECD/NEA and the Spanish Nuclear Society (SNE). TopFuel's primary objective was to bring together leading specialists in the field from around the world to analyse advances in nuclear fuel management technology and to use the findings of the latest cutting-edge research to help manufacture the high performance nuclear fuels of today and tomorrow. The TopFuel 2006 agenda revolved around ten technical sessions dedicated to priority issues such as security of supply, new fuel and reactor core designs, fuel cycle strategies and spent fuel management. Among the many topics under discussion were new developments in fuel performance modelling, advanced fuel assembly design and the improved conditioning and processing of spent fuel. During the week, a poster exhibition also gave delegates the opportunity to display and discuss the results of their latest work and to network with fellow professionals. One important statement to emerge from TopFuel 2006 was that the world has enough reserves of uranium to support the large-scale and long-term production of nuclear energy. The OECD/NEA and the IAEA recently published a report entitled Uranium 2005: Resources, Production and Demand (the Red Book). The report, which makes a comprehensive assessment of uranium supplies and projected demand up until the year 2025, concludes by saying 'the uranium resource base is adequate to meet projected future requirements'. With the

Optimization of Fuel Cell System Operating Conditions for Fuel Cell Vehicles

OpenAIRE

Zhao, Hengbing; Burke, Andy

2008-01-01

Proton Exchange Membrane fuel cell (PEMFC) technology for use in fuel cell vehicles and other applications has been intensively developed in recent decades. Besides the fuel cell stack, air and fuel control and thermal and water management are major challenges in the development of the fuel cell for vehicle applications. The air supply system can have a major impact on overall system efficiency. In this paper a fuel cell system model for optimizing system operating conditions was developed wh...

Fuel choices for fuel-cell vehicles : well-to-wheel energy and emission impacts

International Nuclear Information System (INIS)

Wang, M.

2002-01-01

Because of their high energy efficiencies and low emissions, fuel-cell vehicles (FCVs) are undergoing extensive research and development. While hydrogen will likely be the ultimate fuel to power fuel-cell vehicles, because of current infrastructure constraints, hydrogen-carrying fuels are being investigated as transitional fuel-cell fuels. A complete well-to-wheels (WTW) evaluation of fuel-cell vehicle energy and emission effects that examines (1) energy feedstock recovery and transportation; (2) fuel production, transportation, and distribution; and (3) vehicle operation must be conducted to assist decision makers in selecting the fuel-cell fuels that achieve the greatest energy and emission benefits. A fuel-cycle model developed at Argonne National Laboratory--called the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model--was used to evaluate well-to-wheels energy and emission impacts of various fuel-cell fuels. The results show that different fuel-cell fuels can have significantly different energy and greenhouse gas emission effects. Therefore, if fuel-cell vehicles are to achieve the envisioned energy and emission reduction benefits, pathways for producing the fuels that power them must be carefully examined.

An optimized BWR fuel lattice for improved fuel utilization

International Nuclear Information System (INIS)

Bernander, O.; Helmersson, S.; Schoen, C.G.

1984-01-01

Optimization of the BWR fuel lattice has evolved into the water cross concept, termed ''SVEA'', whereby the improved moderation within bundles augments reactivity and thus improves fuel cycle economy. The novel design introduces into the assembly a cruciform and double-walled partition containing nonboiling water, thus forming four subchannels, each of which holds a 4x4 fuel rod bundle. In Scandinavian BWRs - for which commercial SVEA reloads are now scheduled - the reactivity gain is well exploited without adverse impact in other respects. In effect, the water cross design improves both mechanical and thermal-hydraulic performance. Increased average burnup is also promoted through achieving flatter local power distributions. The fuel utilization savings are in the order of 10%, depending on the basis of comparison, e.g. choice of discharge burnup and lattice type. This paper reviews the design considerations and the fuel utilization benefits of the water cross fuel for non-Scandinavian BWRs which have somewhat different core design parameters relative to ASEA-ATOM reactors. For one design proposal, comparisons are made with current standard 8x8 fuel rod bundles as well as with 9x9 type fuel in reactors with symmetric or asymmetric inter-assembly water gaps. The effect on reactivity coefficients and shutdown margin are estimated and an assessment is made of thermal-hydraulic properties. Consideration is also given to a novel and advantageous way of including mixed-oxide fuel in BWR reloads. (author)

Heating subsurface formations by oxidizing fuel on a fuel carrier

Science.gov (United States)

Costello, Michael; Vinegar, Harold J.

2012-10-02

A method of heating a portion of a subsurface formation includes drawing fuel on a fuel carrier through an opening formed in the formation. Oxidant is supplied to the fuel at one or more locations in the opening. The fuel is combusted with the oxidant to provide heat to the formation.

Well-to-wheels analysis of fuel-cell vehicle/fuel systems

International Nuclear Information System (INIS)

Wang, M.

2002-01-01

Major automobile companies worldwide are undertaking vigorous research and development efforts aimed at developing fuel-cell vehicles (FCVs). Proton membrane exchange (PEM)-based FCVs require hydrogen (H(sub 2)) as the fuel-cell (FC) fuel. Because production and distribution infrastructure for H(sub 2) off board FCVs as a transportation fuel does not exist yet, researchers are developing FCVs that can use hydrocarbon fuels, such as methanol (MeOH) and gasoline, for onboard production of H(sub 2) via fuel processors. Direct H(sub 2) FCVs have no vehicular emissions, while FCVs powered by hydrocarbon fuels have near-zero emissions of criteria pollutants and some carbon dioxide (CO(sub 2)) emissions. However, production of H(sub 2) can generate a large amount of emissions and suffer significant energy losses. A complete evaluation of the energy and emission impacts of FCVs requires an analysis of energy use and emissions during all stages, from energy feedstock wells to vehicle wheels-a so-called ''well-to-wheels'' (WTW) analysis. This paper focuses on FCVs powered by several transportation fuels. Gasoline vehicles (GVs) equipped with internal combustion engines (ICEs) are the baseline technology to which FCVs are compared. Table 1 lists the 13 fuel pathways included in this study. Petroleum-to-gasoline (with 30-ppm sulfur[S] content) is the baseline fuel pathway for GVs

Estonia in the system of global climate change. Publication 4/1996

International Nuclear Information System (INIS)

Punning, J.M.

1996-01-01

Estonia is among the countries who signed the Framework Convention on Climate Change (FCCC) at the UN Conference in Rio de Janeiro in June 1992. The FCCC calls on its parties to inventory national sources, to reduction in greenhouse gases and to development of projects responding to climate change. In 1994, an Estonian Country Study Project was initiated within the U.S. Country Studies Program. The Estonian Country Study Project is comprehensive, covering all sectors and directions of activity in Estonia that might impact climate change or be influenced by Global Climate Change. This book contains a collection of papers, covering the aims of the Estonian Country Study Project

Fuel loading and homogeneity analysis of HFIR design fuel plates loaded with uranium silicide fuel

International Nuclear Information System (INIS)

Blumenfeld, P.E.

1995-08-01

Twelve nuclear reactor fuel plates were analyzed for fuel loading and fuel loading homogeneity by measuring the attenuation of a collimated X-ray beam as it passed through the plates. The plates were identical to those used by the High Flux Isotope Reactor (HFIR) but were loaded with uranium silicide rather than with HFIR's uranium oxide fuel. Systematic deviations from nominal fuel loading were observed as higher loading near the center of the plates and underloading near the radial edges. These deviations were within those allowed by HFIR specifications. The report begins with a brief background on the thermal-hydraulic uncertainty analysis for the Advanced Neutron Source (ANS) Reactor that motivated a statistical description of fuel loading and homogeneity. The body of the report addresses the homogeneity measurement techniques employed, the numerical correction required to account for a difference in fuel types, and the statistical analysis of the resulting data. This statistical analysis pertains to local variation in fuel loading, as well as to ''hot segment'' analysis of narrow axial regions along the plate and ''hot streak'' analysis, the cumulative effect of hot segment loading variation. The data for all twelve plates were compiled and divided into 20 regions for analysis, with each region represented by a mean and a standard deviation to report percent deviation from nominal fuel loading. The central regions of the plates showed mean values of about +3% deviation, while the edge regions showed mean values of about -7% deviation. The data within these regions roughly approximated random samplings from normal distributions, although the chi-square (χ 2 ) test for goodness of fit to normal distributions was not satisfied

Cost reductions of fuel cells for transport applications: fuel processing options

Energy Technology Data Exchange (ETDEWEB)

Teagan, W P; Bentley, J; Barnett, B [Arthur D. Little, Inc., Cambridge, MA (United States)

1998-03-15

The highly favorable efficiency/environmental characteristics of fuel cell technologies have now been verified by virtue of recent and ongoing field experience. The key issue regarding the timing and extent of fuel cell commercialization is the ability to reduce costs to acceptable levels in both stationary and transport applications. It is increasingly recognized that the fuel processing subsystem can have a major impact on overall system costs, particularly as ongoing R and D efforts result in reduction of the basic cost structure of stacks which currently dominate system costs. The fuel processing subsystem for polymer electrolyte membrane fuel cell (PEMFC) technology, which is the focus of transport applications, includes the reformer, shift reactors, and means for CO reduction. In addition to low cost, transport applications require a fuel processor that is compact and can start rapidly. This paper describes the impact of factors such as fuel choice operating temperature, material selection, catalyst requirements, and controls on the cost of fuel processing systems. There are fuel processor technology paths which manufacturing cost analyses indicate are consistent with fuel processor subsystem costs of under $150/kW in stationary applications and $30/kW in transport applications. As such, the costs of mature fuel processing subsystem technologies should be consistent with their use in commercially viable fuel cell systems in both application categories. (orig.)

Design Package for Fuel Retrieval System Fuel Handling Tool Modification

International Nuclear Information System (INIS)

TEDESCHI, D.J.

2000-01-01

This is a design package that contains the details for a modification to a tool used for moving fuel elements during loading of MCO Fuel Baskets for the Fuel Retrieval System. The tool is called the fuel handling tool (or stinger). This document contains requirements, development design information, tests, and test reports

Relationships between luteal activity, fertility, blood metabolites and body condition score in multiparous Estonian Holstein dairy cows under different management.

Science.gov (United States)

Samarütel, Jaak; Waldmann, Andres; Ling, Katri; Jaakson, Hanno; Kaart, Tanel; Leesmäe, Andres; Kärt, Olav

2008-11-01

The objective was to compare the relationships between luteal activity and fertility, and relate these parameters to metabolic indices and body condition changes in multiparous Estonian Holstein cows on two commercial dairy farms under different management and levels of production and nutrition (higher, H, n=54 (71 lactations) and lower, L, n=39 (39 lactations)). For statistical analysis cows were categorized according to their milk progesterone (P4) profiles as follows: normal ovarian function; delayed start of cyclicity (DC) (interval from calving to first luteal response (P45 ng/ml up to and more than 50 d respectively, followed by regular cyclicity); cessation of luteal activity (prolonged interluteal interval, P4bodies, non-esterified fatty acids, total cholesterol) and aspartate aminotransferase, body condition scores (BCS) and fertility parameters between the two farms, and also fertility parameters between the farms within P4 categories. Differences in milk fat/protein ratio, ketone body levels and BCS indicated a deeper negative energy balance (NEB) during the first month after calving on farm L. On both farms nearly 50% of the recently calved dairy cows suffered from ovarian dysfunction during the post-partum period. Delayed start of cyclicity was the most prevalent abnormal P4 profile, 25% and 28% on farms H and L, respectively. Prolonged luteal activity accounted for one-third of atypical ovarian patterns on farm H, and cessation of luteal activity on farm L. On farm L, DC cows had lower BCS values from day 10 to day 90 after calving compared with normal cows (Pcows lost more BCS (1.2 units) during the 40 d after calving than normal resumption cows (0.75 units; P<0.05). On farm H with moderate NEB the delayed start of ovulation post partum did not impair subsequent reproductive performance.

Behaviour of defective CANDU fuel: fuel oxidation kinetic and thermodynamic modelling

International Nuclear Information System (INIS)

Higgs, J.

2005-01-01

The thermal performance of operating CANDU fuel under defect conditions is affected by the ingress of heavy water into the fuel element. A mechanistic model has been developed to predict the extent of fuel oxidation in defective fuel and its affect on fuel thermal performance. A thermodynamic treatment of such oxidized fuel has been performed as a basis for the boundary conditions in the kinetic model. Both the kinetic and thermodynamic models have been benchmarked against recent experimental work. (author)

Education in the Soviet Baltic Republics.

Science.gov (United States)

Soviet Education, 1981

1981-01-01

Includes 11 articles about education in the Soviet Baltic Republics. The articles include historical studies of Estonian and Latvian schools and medieval Estonian folk games. The impact of Marxist educational theories and Soviet policies on educational research, teacher education, and teaching methods in the Baltic region from 1920-50 is…

Nuclear fuel storage

International Nuclear Information System (INIS)

Bevilacqua, F.

1979-01-01

A method and apparatus for the storage of fuel in a stainless steel egg crate structure within a storage pool are described. Fuel is initially stored in a checkerboard pattern or in each opening if the fuel is of low enrichment. Additional fuel (or fuel of higher enrichment) is later stored by adding stainless steel angled plates within each opening, thereby forming flux traps between the openings. Still higher enrichment fuel is later stored by adding poison plates either with or without the stainless steel angles. 8 claims

Fuel handling machine and auxiliary systems for a fuel handling cell

International Nuclear Information System (INIS)

Suikki, M.

2013-10-01

This working report is an update for as well as a supplement to an earlier fuel handling machine design (Kukkola and Roennqvist 2006). A focus in the earlier design proposal was primarily on the selection of a mechanical structure and operating principle for the fuel handling machine. This report introduces not only a fuel handling machine design but also auxiliary fuel handling cell equipment and its operation. An objective of the design work was to verify the operating principles of and space allocations for fuel handling cell equipment. The fuel handling machine is a remote controlled apparatus capable of handling intensely radiating fuel assemblies in the fuel handling cell of an encapsulation plant. The fuel handling cell is air tight space radiation-shielded with massive concrete walls. The fuel handling machine is based on a bridge crane capable of traveling in the handling cell along wall tracks. The bridge crane has its carriage provided with a carousel type turntable having mounted thereon both fixed and telescopic masts. The fixed mast has a gripper movable on linear guides for the transfer of fuel assemblies. The telescopic mast has a manipulator arm capable of maneuvering equipment present in the fuel handling cell, as well as conducting necessary maintenance and cleaning operations or rectifying possible fault conditions. The auxiliary fuel handling cell systems consist of several subsystems. The subsystems include a service manipulator, a tool carrier for manipulators, a material hatch, assisting winches, a vacuum cleaner, as well as a hose reel. With the exception of the vacuum cleaner, the devices included in the fuel handling cell's auxiliary system are only used when the actual encapsulation process is not ongoing. The malfunctions of mechanisms or actuators responsible for the motion actions of a fuel handling machine preclude in a worst case scenario the bringing of the fuel handling cell and related systems to a condition appropriate for

Fuel handling machine and auxiliary systems for a fuel handling cell

Energy Technology Data Exchange (ETDEWEB)

Suikki, M. [Optimik Oy, Turku (Finland)

2013-10-15

This working report is an update for as well as a supplement to an earlier fuel handling machine design (Kukkola and Roennqvist 2006). A focus in the earlier design proposal was primarily on the selection of a mechanical structure and operating principle for the fuel handling machine. This report introduces not only a fuel handling machine design but also auxiliary fuel handling cell equipment and its operation. An objective of the design work was to verify the operating principles of and space allocations for fuel handling cell equipment. The fuel handling machine is a remote controlled apparatus capable of handling intensely radiating fuel assemblies in the fuel handling cell of an encapsulation plant. The fuel handling cell is air tight space radiation-shielded with massive concrete walls. The fuel handling machine is based on a bridge crane capable of traveling in the handling cell along wall tracks. The bridge crane has its carriage provided with a carousel type turntable having mounted thereon both fixed and telescopic masts. The fixed mast has a gripper movable on linear guides for the transfer of fuel assemblies. The telescopic mast has a manipulator arm capable of maneuvering equipment present in the fuel handling cell, as well as conducting necessary maintenance and cleaning operations or rectifying possible fault conditions. The auxiliary fuel handling cell systems consist of several subsystems. The subsystems include a service manipulator, a tool carrier for manipulators, a material hatch, assisting winches, a vacuum cleaner, as well as a hose reel. With the exception of the vacuum cleaner, the devices included in the fuel handling cell's auxiliary system are only used when the actual encapsulation process is not ongoing. The malfunctions of mechanisms or actuators responsible for the motion actions of a fuel handling machine preclude in a worst case scenario the bringing of the fuel handling cell and related systems to a condition appropriate for

Impact of fuel fabrication and fuel management technologies on uranium management

International Nuclear Information System (INIS)

Arnsberger, P.L.; Stucker, D.L.

1994-01-01

Uranium utilization in commercial pressurized water reactors is a complex function of original NSSS design, utility energy requirements, fuel assembly design, fuel fabrication materials and fuel fabrication materials and fuel management optimization. Fuel design and fabrication technologies have reacted to the resulting market forcing functions with a combination of design and material changes. The technologies employed have included ever-increasing fuel discharge burnup, non-parasitic structural materials, burnable absorbers, and fissile material core zoning schemes (both in the axial and radial direction). The result of these technological advances has improved uranium utilization by roughly sixty percent from the infancy days of nuclear power to present fuel management. Fuel management optimization technologies have also been developed in recent years which provide fuel utilization improvements due to core loading pattern optimization. This paper describes the development and impact of technology advances upon uranium utilization in modern pressurized water reactors. 10 refs., 3 tabs., 10 figs

Methanol fuel processor and PEM fuel cell modeling for mobile application

Energy Technology Data Exchange (ETDEWEB)

Chrenko, Daniela [ISAT, University of Burgundy, Rue Mlle Bourgoise, 58000 Nevers (France); Gao, Fei; Blunier, Benjamin; Bouquain, David; Miraoui, Abdellatif [Transport and Systems Laboratory (SeT) - EA 3317/UTBM, Fuel cell Laboratory (FCLAB), University of Technology of Belfort-Montbeliard, Rue Thierry Mieg 90010, Belfort Cedex (France)

2010-07-15

The use of hydrocarbon fed fuel cell systems including a fuel processor can be an entry market for this emerging technology avoiding the problem of hydrogen infrastructure. This article presents a 1 kW low temperature PEM fuel cell system with fuel processor, the system is fueled by a mixture of methanol and water that is converted into hydrogen rich gas using a steam reformer. A complete system model including a fluidic fuel processor model containing evaporation, steam reformer, hydrogen filter, combustion, as well as a multi-domain fuel cell model is introduced. Experiments are performed with an IDATECH FCS1200 trademark fuel cell system. The results of modeling and experimentation show good results, namely with regard to fuel cell current and voltage as well as hydrogen production and pressure. The system is auto sufficient and shows an efficiency of 25.12%. The presented work is a step towards a complete system model, needed to develop a well adapted system control assuring optimized system efficiency. (author)

Fuel manufacturing and utilization

International Nuclear Information System (INIS)

2005-01-01

The efficient utilisation of nuclear fuel requires manufacturing facilities capable of making advanced fuel types, with appropriate quality control. Once made, the use of such fuels requires a proper understanding of their behaviour in the reactor environment, so that safe operation for the design life can be achieved. The International Atomic Energy Agency supports Member States to improve in-pile fuel performance and management of materials; and to develop advanced fuel technologies for ensuring reliability and economic efficiency of the nuclear fuel cycle. It provides assistance to Member States to support fuel-manufacturing capability, including quality assurance techniques, optimization of manufacturing parameters and radiation protection. The IAEA supports the development fuel modelling expertise in Member States, covering both normal operation and postulated and severe accident conditions. It provides information and support for the operation of Nuclear Power Plant to ensure that the environment and water chemistry is appropriate for fuel operation. The IAEA supports fuel failure investigations, including equipment for failed fuel detection and for post-irradiation examination and inspection, as well as fuel repair, it provides information and support research into the basic properties of fuel materials, including UO 2 , MOX and zirconium alloys. It further offers guidance on the relationship with back-end requirement (interim storage, transport, reprocessing, disposal), fuel utilization and management, MOX fuels, alternative fuels and advanced fuel technology

Measurement of fuel importance distribution in non-uniformly distributed fuel systems

International Nuclear Information System (INIS)

Yamane, Yoshihiro; Hirano, Yasushi; Yasui, Hazime; Izima, Kazunori; Shiroya, Seiji; Kobayashi, Keiji.

1995-01-01

A reactivity effect due to a spatial variation of nuclear fuel concentration is an important problem for nuclear criticality safety in a reprocessing plant. As a theory estimating this reactivity effect, the Goertzel and fuel importance theories are well known. It has been shown that the Goertzel's theory is valid in the range of our experiments based on measurements of reactivity effect and thermal neutron flux in non-uniformly distributed fuel systems. On the other hand, there have been no reports concerning systematic experimental studies on the flatness of fuel importance which is a more general index than the Goertzel's theory. It is derived from the perturbation theory that the fuel importance is proportional to the reactivity change resulting from a change of small amount of fuel mass. Using a uniform and three kinds of nonuniform fuel systems consisting of 93.2% enriched uranium plates and polyethylene plates, the fuel importance distributions were measured. As a result, it was found experimentally that the fuel importance distribution became flat, as its reactivity effect became large. Therefore it was concluded that the flatness of fuel importance distribution is the useful index for estimating reactivity effect of non-uniformly distributed fuel system. (author)

Taxation on vehicle fuels: its impacts on switching to cleaner fuels

International Nuclear Information System (INIS)

Hung, W.-T.

2006-01-01

Vehicular consumption of fossil fuel contributes over 90% of air pollution in Hong Kong. A key strategy to improve Hong Kong's air quality is to discourage dirty fuels (e.g., leaded petrol and high-sulphur diesel) and to promote the use of clean fuels (e.g., low-sulphur diesel and liquefied petroleum gas (LPG)). This paper presents the empirical evidence on the effectiveness of the Government's clean fuel programs that offer tax subsidy to lower the consumption cost of such fuels. For the cases of unleaded petrol and ultra-low-sulphur diesel, lower fuel duties were offered so that the prices of these fuels were below those of leaded petrol and conventional diesel. Conventional petrol and diesel were phased out. In order to decide on the level of fuel duty concessions required to introduce LPG for taxis and bio-diesel for other vehicles, various Government-run trial programs were introduced to obtain cost estimates of using these alternative cleaner fuels. LPG using vehicles were subsequently exempted from the fuel duty in order to attract taxi and light bus operators to switch to LPG. It is apparent that the higher the subsidy, the faster is the rate at which switching to cleaner fuels takes place

Fuels characterization studies. [jet fuels

Science.gov (United States)

Seng, G. T.; Antoine, A. C.; Flores, F. J.

1980-01-01

Current analytical techniques used in the characterization of broadened properties fuels are briefly described. Included are liquid chromatography, gas chromatography, and nuclear magnetic resonance spectroscopy. High performance liquid chromatographic ground-type methods development is being approached from several directions, including aromatic fraction standards development and the elimination of standards through removal or partial removal of the alkene and aromatic fractions or through the use of whole fuel refractive index values. More sensitive methods for alkene determinations using an ultraviolet-visible detector are also being pursued. Some of the more successful gas chromatographic physical property determinations for petroleum derived fuels are the distillation curve (simulated distillation), heat of combustion, hydrogen content, API gravity, viscosity, flash point, and (to a lesser extent) freezing point.

The Nuclear Fuel Cycle

International Nuclear Information System (INIS)

2011-08-01

This brochure describes the nuclear fuel cycle, which is an industrial process involving various activities to produce electricity from uranium in nuclear power reactors. The cycle starts with the mining of uranium and ends with the disposal of nuclear waste. The raw material for today's nuclear fuel is uranium. It must be processed through a series of steps to produce an efficient fuel for generating electricity. Used fuel also needs to be taken care of for reuse and disposal. The nuclear fuel cycle includes the 'front end', i.e. preparation of the fuel, the 'service period' in which fuel is used during reactor operation to generate electricity, and the 'back end', i.e. the safe management of spent nuclear fuel including reprocessing and reuse and disposal. If spent fuel is not reprocessed, the fuel cycle is referred to as an 'open' or 'once-through' fuel cycle; if spent fuel is reprocessed, and partly reused, it is referred to as a 'closed' nuclear fuel cycle.