Identification of ergonomic issues that affect workers in oilrigs in desert environments.

Science.gov (United States)

Shikdar, Ashraf A

2004-01-01

The main objective of this research was to conduct an assessment of ergonomic-related problems in oilrigs in a desert environment. A checklist, physical audit and medical records were used in the investigation. The results showed significant health, environment and work-related problems that could be attributed to ergonomic deficiencies in the work system of the oilrig. Some major ergonomic issues identified were hard physical work, back pain, discomfort, hot environment, long shift, and diverse schedule. Ninety-four percent of the employees perceived the workday as very long, 79% were dissatisfied with the work schedule, while 61% of the employees perceived the summer work environment as extremely hot. Ergonomics should be considered in the work system design so as to reduce or eliminate problems in oilrigs in hot desert environments.

[Evaluation of ergonomic load of clinical nursing procedures].

Science.gov (United States)

Yan, P; Zhang, L; Li, F Y; Yang, Y; Wang, Y N; Huang, A M; Dai, Y L; Yao, H

2017-08-20

Objective: To evaluate the ergonomic load of clinical nursing procedures and to provide evidence for the prevention and management of work-related musculoskeletal disorders (WMSDs) in nurses. Methods: Based on the nursing unit characteristics and the common departments involving patient-turning procedures, 552 nurses were selected from 6 clinical departments from July to September, 2016. The ergonomic load of four types of patient-turning procedures, i.e., turning the patient's body, changing the bed linen of in-bed patients, moving patients, and chest physiotherapy, was evaluated by the on-site inspectors and self-evaluated by the operators using the Quick Exposure Check. The exposure value, exposure level, and exposure rate of WMSDs were assessed based on the procedure-related physical loads on the back, shoulders/arms, wrists/hands and neck, as well as the loads from work rhythm and work pressure. Results: All surveyed subjects were females who were aged mostly between 26-30 years (49.46%) , with a mean age of 29.66±5.28 years. These nurses were mainly from the Department of Infection (28.99%) and Spine Surgery (21.56%) . There were significant differences in the back, shoulders/arms, neck, work rhythm, and work pressure scores between different nursing procedures ( F =16.613, 5.884, 3.431, 3.222, and 5.085, respectively; P nursing procedures resulted in high to intermediate physical load in nurses. Procedures with high to low level of WMSDs exposure were patient turning (72.69%) , bed linen changing (67.15%) , patient transfer (65.82%) , and chest physiotherapy (58.34%) . In particular, patient turning was considered as very high-risk procedure, whereas others were considered as high-risk procedures. Conclusion: Patient-turning nursing procedures result in high ergonomic load in the operators. Therefore, more focus should be placed on the ergonomics of the caretakers and nurses.

Effectiveness of computer ergonomics interventions for an engineering company: a program evaluation.

Science.gov (United States)

Goodman, Glenn; Landis, James; George, Christina; McGuire, Sheila; Shorter, Crystal; Sieminski, Michelle; Wilson, Tamika

2005-01-01

Ergonomic principles at the computer workstation may reduce the occurrence of work related injuries commonly associated with intensive computer use. A program implemented in 2001 by an occupational therapist and a physical therapist utilized these preventative measures with education about ergonomics, individualized evaluations of computer workstations, and recommendations for ergonomic and environmental changes. This study examined program outcomes and perceived effectiveness based on review of documents, interviews, and surveys of the employees and the plant manager. The program was deemed successful as shown by 59% of all therapist recommendations and 74% of ergonomic recommendations being implemented by the company, with an 85% satisfaction rate for the ergonomic interventions and an overall employee satisfaction rate of 70%. Eighty-one percent of the physical problems reported by employees were resolved to their satisfaction one year later. Successful implementation of ergonomics programs depend upon effective communication and education of the consumers, and the support, cooperation and collaboration of management and employees.

PROPOSAL FOR AN ERGONOMIC CONFORMITY INDEX FOR EVALUATION OF HARVESTERS AND FORWARDERS

Directory of Open Access Journals (Sweden)

Felipe Leitão da Cunha Marzano

2017-11-01

Full Text Available ABSTRACT Context: In mechanized forestry work, the ergonomic conditions of the workplace affects operator's health, performance and productivity. Originality: A comparison of different forest machines becomes complex in case where it is required analysis of several ergonomic factors simultaneously. There are several methods of ergonomic analysis however, a more complete methodology that considers several ergonomic factors and produces an index that represent the ergonomic condition of the machine is needed. Objective: Propose a methodology to determining an Ergonomic Conformity Index to evaluate Harvesters and Forwarders of different brands. Methodology: The ECI was determined initially basing in four relevant ergonomic factors: noise, vibration, thermal environment and air quality. These factors were evaluated utilizing four Harvesters and two Forwarders in eucalyptus timber harvesting operations. For each factor, a score was given according to its compliance with the established parameters. The ECI was obtained from an average of the scores given to each factor. The index ranges from zero to one, so that lower values indicate worse ergonomic conditions. Results: All the analyzed machines had continuous noise between 75.0 and 82.6 dB (A and whole-body vibration between 0.27 and 0.70 m s-2. HV1 and HV2 presented thermal environment in accordance with the established criteria, other machines showed deficiencies in this regard. All the machines presented non-conformities in the air quality, except HV2. The ECI of Harvesters HV1, HV2, HV3 and HV4, were 0.83; 0.88; 0.71; 0.63. The ECI of Forwarders FW1 and FW2 were 0.58 and 0.79. Conclusion: The determination of the ECI allowed an evaluation and comparison between analyzed forest machines. The machine with the higher ECI had only one non-conformity, and it was related to noise inside the cab. The machine that got the lower ECI presented non-conformities for all the factors.

Ergonomic Intervention Effect in Reducing Musculoskeletal Disorders in Staff of Shiraz Medical School

Directory of Open Access Journals (Sweden)

Keyvan Pakshir

2012-05-01

Full Text Available Background and aims: High percentage of musculoskeletal disorders occurs due to awkward working posture and poor workstation design. So this study was conducted to determine the prevalence rate of musculoskeletal disorders , evaluate workstations and investigate the effectiveness of ergonomic interventional measures among medical school staff of Shiraz University of Medical Sciences (SUMS.   Methods: In this interventional study, 200 employees of different units of medical school of SUMS participated. They were randomly divided into experimental and control groups. Data were collected via anonymous questionnaire, RULA and QEC techniques as well as an ergonomic workstation checklist that was used to evaluate working conditions.   Results: The results showed that after conducting interventional program for the experimental group there was a significant relationship between employees' increased awareness of ergonomics and workstation improvement (p≤0.05. Additionally, the prevalence rate of reported musculoskeletal disorders in experimental group was significantly reduced following intervention (p≤0.05. After corrective measures, level of risk was decreased and working postures were improved. A significant relationship was observed between risk levels and neck and shoulder pain in the experimental group (p≤0.05 . Following the intervention, workstations scores were increased significantly. Conclusion: On the basis of the findings of this study, it could be noted that the ergonomic interventional program was effective to improve working posture and workstations as well as to reduce the prevalence of musculoskeletal disorders among the staff.

The ergonomics approach for thin film transistor-liquid crystal display manufacturing process.

Science.gov (United States)

Lu, Chih-Wei; Yao, Chia-Chun; Kuo, Chein-Wen

2012-01-01

The thin film transistor-liquid crystal display (TFT-LCD) has been used all over the world. Although the manufacture process of TFT-LCD was highly automated, employees are hired to do manual job in module assembly process. The operators may have high risk of musculoskeletal disorders because of the long work hours and the repetitive activities in an unfitted work station. The tools of this study were questionnaire, checklist and to evaluate the work place design. The result shows that the participants reported high musculoskeletal disorder symptoms in shoulder (59.8%), neck (49.5%), wrist (39.5%), and upper back (30.6%). And, to reduce the ergonomic risk factors, revising the height of the work benches, chairs and redesigning the truck to decrease the chance of unsuitable positions were recommended and to reduce other ergonomics hazards and seta good human machine interface and appropriate job design.

Women's Studies Collections: A Checklist Evaluation

Science.gov (United States)

Bolton, Brooke A.

2009-01-01

A checklist evaluation on thirty-seven Women's Studies programs conducted using the individual institutions' online public access catalogs (OPACs) is presented. Although Women's Studies collections are very difficult to build, an evaluation of existing programs shows that collections, for the most part, have managed substantial coverage of the…

Web sites for ergonomics support

OpenAIRE

Fafejta, Martin

2012-01-01

The subject of this bachelor thesis is survey of computer classrooms from the ergonomic point of view and show ergonomic rules to internet community in accessible form. Theoretic knowledge was gain from literature connected with ergonomic and work hygiene. Main relevance was given to use of computer and ergonomic of computer classroom. Several schools was evaluates in practical part with focus on ergonomic suitability. The conclusions of this thesis are websites contains ergonomics rules and ...

Connections between voice ergonomic risk factors in classrooms and teachers' voice production.

Science.gov (United States)

Rantala, Leena M; Hakala, Suvi; Holmqvist, Sofia; Sala, Eeva

2012-01-01

The aim of the study was to investigate if voice ergonomic risk factors in classrooms correlated with acoustic parameters of teachers' voice production. The voice ergonomic risk factors in the fields of working culture, working postures and indoor air quality were assessed in 40 classrooms using the Voice Ergonomic Assessment in Work Environment - Handbook and Checklist. Teachers (32 females, 8 males) from the above-mentioned classrooms recorded text readings before and after a working day. Fundamental frequency, sound pressure level (SPL) and the slope of the spectrum (alpha ratio) were analyzed. The higher the number of the risk factors in the classrooms, the higher SPL the teachers used and the more strained the males' voices (increased alpha ratio) were. The SPL was already higher before the working day in the teachers with higher risk than in those with lower risk. In the working environment with many voice ergonomic risk factors, speakers increase voice loudness and use more strained voice quality (males). A practical implication of the results is that voice ergonomic assessments are needed in schools. Copyright © 2013 S. Karger AG, Basel.

Ergonomic evaluation of subjects involved in orange ( Citrus sinensis )

African Journals Online (AJOL)

Ergonomic evaluation of subjects involved in orange handling operation in Kano State was conducted. Anthropometric parameters were evaluated, where they were found to vary with age amongst the subjects selected. 20th and 80th percentiles of the dimensions were computed and recommended for usage in design of ...

Ergonomic workplace assessment in orthotic and prosthetic workshops.

Science.gov (United States)

Salmani Nodooshan, H; Koohi Booshehri, S; Daneshmandi, H; Choobineh, A R

2016-10-17

In Iranian orthotic and prosthetic workshops, the majority of activities are carried out by manpower and the tasks are labor-intensive. In these workshops, ergonomic aspects of working conditions are seldom considered. This study was conducted in orthotic and prosthetic workshops with the objectives of determination of prevalence rate of MSDs among employees and assessment of ergonomics working conditions. In this cross-sectional study, all employees (n = 42; 29 males and 13 females) in 11 active orthotic and prosthetic production centers of Shiraz city participated. Data were collected using Nordic Musculoskeletal disorders Questionnaire (NMQ) and observational technique by an ergonomics checklist for assessment of working conditions. The means (SD) of age and job tenure (years) in the study individuals were 37.26 (10.21) and 12.8 (9.39), respectively. The most prevalent MSD symptoms in the past 12 months were reported in the lower back (42.9%), shoulders (40.5%) and knees (40.5%). Working conditions assessment showed that the main ergonomic problems in the workshops studied originated from awkward working posture, improper workstation design, poorly designed hand tools and incorrect manual material handling. Any interventional program for working conditions improvement should, therefore, focus on these areas.

Ergonomics in Dentistry

Directory of Open Access Journals (Sweden)

Dargahi H

2010-01-01

Full Text Available Background and Aims: There are several risk factors in dentistry professional environment. Carelessness about occupational health regulation endangers dentist's life. Erconomics in dentistry is a scientific approach which introduces the latest ergonomic principles in dental profession. It discusses about physical and mental stresses. Ergonomic programs eliminate dentist physical and mental challenges and provide practical solution to establish efficient and comforting environment. Materials and Methods: This study reviewed the role and effectiveness of Ergonomics in dental profession. We used related journals, books and ergonomics websites to write this article. Conclusion: Many of researchers believe that awkward body posture and low movement are the sources of occupational disorders. Therefore, knowledge of ergonomics risk factors in dental office design is very important. Dentist's body posture and dental equipment evaluations are important factors in dental ergonomics. The most logical approach to design dental equipment for utilizing ergonomics principles is consideration of the dentist posture and type of movements and activities. In conclusion, dentists should be informed about dental ergonomics regulation and its different aspects. Furthermore, academic developments and research projects can be useful in this area.

Connections between voice ergonomic risk factors and voice symptoms, voice handicap, and respiratory tract diseases.

Science.gov (United States)

Rantala, Leena M; Hakala, Suvi J; Holmqvist, Sofia; Sala, Eeva

2012-11-01

The aim of the study was to investigate the connections between voice ergonomic risk factors found in classrooms and voice-related problems in teachers. Voice ergonomic assessment was performed in 39 classrooms in 14 elementary schools by means of a Voice Ergonomic Assessment in Work Environment--Handbook and Checklist. The voice ergonomic risk factors assessed included working culture, noise, indoor air quality, working posture, stress, and access to a sound amplifier. Teachers from the above-mentioned classrooms reported their voice symptoms, respiratory tract diseases, and completed a Voice Handicap Index (VHI). The more voice ergonomic risk factors found in the classroom the higher were the teachers' total scores on voice symptoms and VHI. Stress was the factor that correlated most strongly with voice symptoms. Poor indoor air quality increased the occurrence of laryngitis. Voice ergonomics were poor in the classrooms studied and voice ergonomic risk factors affected the voice. It is important to convey information on voice ergonomics to education administrators and those responsible for school planning and taking care of school buildings. Copyright © 2012 The Voice Foundation. Published by Mosby, Inc. All rights reserved.

Ergonomic evaluation and comparison of wood harvesting systems in Northwest Russia.

Science.gov (United States)

Gerasimov, Yuri; Sokolov, Anton

2014-03-01

A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Musculoskeletal symptoms and ergonomic hazards among material handlers in grocery retail industries

Science.gov (United States)

Nasrull Abdol Rahman, Mohd; Zuhaidi, Muhammad Fareez Ahmad

2017-08-01

Grocery retail work can be physically demanding as material handler’s tasks involve manual lifting, lowering, carrying, pushing and pulling loads. The nature of this work puts them at a risk for serious low back pain, shoulder pain and other musculoskeletal injuries. This study was conducted by using two different types of tools which were Nordic Musculoskeletal Questionnaire (NMQ) as a survey and Washington Industrial Safety and Health Act (WISHA) Checklist as a direct observation method. Among 46 males and 14 females material handlers were involved throughout this study. For NMQ, the highest body part trouble in the last 12 months was low back pain (88.3%), followed by upper back (68.3%), neck (55.3%) and shoulder (36.7%). While for WISHA Checklist, most of them experienced hazard level involving awkward posture and high hand force. From the research conducted, musculoskeletal disorders (MSDs) and ergonomic risk factors (ERFs) do related as it showed that musculoskeletal disorders may arise if the workers ignored the safety in ergonomic hazards.

32 CFR Appendix G to Part 505 - Management Control Evaluation Checklist

Science.gov (United States)

2010-07-01

... CIVIL AUTHORITIES AND PUBLIC RELATIONS ARMY PRIVACY ACT PROGRAM Pt. 505, App. G Appendix G to Part 505—Management Control Evaluation Checklist (a) Function. The function covered by this checklist is DA Privacy...

Evaluation and Customization of WHO Safety Checklist for Patient Safety in Otorhinolaryngology.

Science.gov (United States)

Dabholkar, Yogesh; Velankar, Haritosh; Suryanarayan, Sneha; Dabholkar, Twinkle Y; Saberwal, Akanksha A; Verma, Bhavika

2018-03-01

The WHO has designed a safe surgery checklist to enhance communication and awareness of patient safety during surgery and to minimise complications. WHO recommends that the check-list be evaluated and customised by end users as a tool to promote safe surgery. The aim of present study was to evaluate the impact of WHO safety checklist on patient safety awareness in otorhinolaryngology and to customise it for the speciality. A prospective structured questionnaire based study was done in ENT operating room for duration of 1 month each for cases, before and after implementation of safe surgery checklist. The feedback from respondents (surgeons, nurses and anaesthetists) was used to arrive at a customised checklist for otolaryngology as per WHO guidelines. The checklist significantly improved team member's awareness of patient's identity (from 17 to 86%) and each other's identity and roles (from 46 to 94%) and improved team communication (from 73 to 92%) in operation theatre. There was a significant improvement in preoperative check of equipment and critical events were discussed more frequently. The checklist could be effectively customised to suit otolaryngology needs as per WHO guidelines. The modified checklist needs to be validated by otolaryngology associations. We conclude from our study that the WHO Surgical safety check-list has a favourable impact on patient safety awareness, team-work and communication of operating team and can be customised for otolaryngology setting.

Design and evaluation of a new ergonomic handle for instruments in minimally invasive surgery.

Science.gov (United States)

Sancibrian, Ramon; Gutierrez-Diez, María C; Torre-Ferrero, Carlos; Benito-Gonzalez, Maria A; Redondo-Figuero, Carlos; Manuel-Palazuelos, Jose C

2014-05-01

Laparoscopic surgery techniques have been demonstrated to provide massive benefits to patients. However, surgeons are subjected to hardworking conditions because of the poor ergonomic design of the instruments. In this article, a new ergonomic handle design is presented. This handle is designed using ergonomic principles, trying to provide both more intuitive manipulation of the instrument and a shape that reduces the high-pressure zones in the contact with the surgeon's hand. The ergonomic characteristics of the new handle were evaluated using objective and subjective studies. The experimental evaluation was performed using 28 volunteers by means of the comparison of the new handle with the ring-handle (RH) concept in an instrument available on the market. The volunteers' muscle activation and motions of the hand, wrist, and arm were studied while they performed different tasks. The data measured in the experiment include electromyography and goniometry values. The results obtained from the subjective analysis reveal that most volunteers (64%) preferred the new prototype to the RH, reporting less pain and less difficulty to complete the tasks. The results from the objective study reveal that the hyperflexion of the wrist required for the manipulation of the instrument is strongly reduced. The new ergonomic handle not only provides important ergonomic advantages but also improves the efficiency when completing the tasks. Compared with RH instruments, the new prototype reduced the high-pressure areas and the extreme motions of the wrist. Copyright © 2014 Elsevier Inc. All rights reserved.

Development and evaluation of an office ergonomic risk checklist: ROSA--rapid office strain assessment.

Science.gov (United States)

Sonne, Michael; Villalta, Dino L; Andrews, David M

2012-01-01

The Rapid Office Strain Assessment (ROSA) was designed to quickly quantify risks associated with computer work and to establish an action level for change based on reports of worker discomfort. Computer use risk factors were identified in previous research and standards on office design for the chair, monitor, telephone, keyboard and mouse. The risk factors were diagrammed and coded as increasing scores from 1 to 3. ROSA final scores ranged in magnitude from 1 to 10, with each successive score representing an increased presence of risk factors. Total body discomfort and ROSA final scores for 72 office workstations were significantly correlated (R = 0.384). ROSA final scores exhibited high inter- and intra-observer reliability (ICCs of 0.88 and 0.91, respectively). Mean discomfort increased with increasing ROSA scores, with a significant difference occurring between scores of 3 and 5 (out of 10). A ROSA final score of 5 might therefore be useful as an action level indicating when immediate change is necessary. ROSA proved to be an effective and reliable method for identifying computer use risk factors related to discomfort. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

The Need to Reevaluate Nonresponding Ergonomic Patients

Science.gov (United States)

Scarpa, Philip J.; Field, Steven A.

1999-01-01

The Kennedy Space Center (KSC) Environmental Health (EH) contractor performs ergonomic evaluations under its Ergonomic Program. Any KSC employee may request one or the reviewing physician may request one for a patient during a visit to an onsite medical facility. As part of the ergonomic evaluation, recommendations are given to the patient to help reduce any ergonomic problems they experience. The recommendations, if implemented, are successful in the majority of KSC patients; however, a group of patients do not seem to improve. Those who don't improve may be identified by reevaluations, which are performed to implement maximum resolution of ergonomic problems.

Ergonomic evaluation of workload by milk production - a bibliometric analysis.

Science.gov (United States)

de Oliveira, Claudilaine Caldas; Pereira Moro, Antônio Renato; Ulbricht, Leandra; Belinelli, Marjorie; de Souza, Gilberto F M; Gabriel, Michele; Zattar, Izabel Cristina

2017-09-21

The purpose of this study was to select in a structured manner the relevant articles with scientific recognition, and simultaneously identify the characteristics of these publications that may scientifically enrich the theme in a portfolio of papers. The theme involves ergonomics in milk production as a criterion for evaluating and improving organizational performance in the milking sector. The study used ProKnow-C as a theoretical instrument for intervention. The main results show: i) a bibliographic portfolio of 18 items aligned with the view adopted by researchers which served as a theoretical framework for this research; ii) The article entitled "Wrist positions and movements as possible risk factors during machine milking", by Marianne Stål, Gert-Åke Hansson and Ulrich Moritz in 1999 and published in the Journal of Applied Ergonomics presented the highest scientific recognition, iii) the authors highlighted in the bibliographic portfolio or in its references researching the subject are Gert-Åke Hansson, Marianne Stål and Stefan Pinzke, and iv) the International Journal of Industrial Ergonomics shows the highest number of scientific articles in the bibliographic portfolio. The studies selected using the methodology indicate research in ergonomics focused on the production of milk in rural areas, specifically in the milking sector, are generally related to the health and safety of the workers.

Incorporating organisational safety culture within ergonomics practice.

Science.gov (United States)

Bentley, Tim; Tappin, David

2010-10-01

This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.

A model for assessing the degree of importance of ergonomics criteria to human machine interface

Energy Technology Data Exchange (ETDEWEB)

Araujo, Cesar Ribeiro de; Domech More, Jesus [Universidade Estacio de Sa do Rio de Janeiro, RJ (Brazil). Mestrado em Desenvolvimento Empresarial - MADE]. E-mail: cesararaujobr@yahoo.com.br; jesus.more@estacio.br; Silva, Aretha Felix Thomaz da [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Civil. Sistemas Computacionais Orientados a Industria do Petroleo]. E-mail: aretha@coc.ufrj.br

2007-07-01

This paper intends to show a model to help us to incorporate ergonomics criteria into the usability of the human computer interface (HCI). The techniques based on fuzzy set theory are appropriate tools for the treatment of subjective and vague concepts that are inherent to usability for the HCI. The application consists of analysis concepts. This approach allows the use of natural language expressions of importance in ergonomics criteria estimation. The above-mentioned model shows the degree of importance of the ergonomics criteria present in the software interface used in the medical area. In this work, as entry data, the system developer opinions are used and as a result we had the hierarchy of 18 ergonomic criteria. The ergonomic criteria are those already validated by the market, which are linked to the ErgoList checklists. The fuzzy model created will allow knowing the most important criteria to health governmental companies. Its Information Technology (IT) professionals will concentrate efforts when treating the usability of the software interface and its systems. (author)

A model for assessing the degree of importance of ergonomics criteria to human machine interface

International Nuclear Information System (INIS)

Araujo, Cesar Ribeiro de; Domech More, Jesus; Silva, Aretha Felix Thomaz da

2007-01-01

This paper intends to show a model to help us to incorporate ergonomics criteria into the usability of the human computer interface (HCI). The techniques based on fuzzy set theory are appropriate tools for the treatment of subjective and vague concepts that are inherent to usability for the HCI. The application consists of analysis concepts. This approach allows the use of natural language expressions of importance in ergonomics criteria estimation. The above-mentioned model shows the degree of importance of the ergonomics criteria present in the software interface used in the medical area. In this work, as entry data, the system developer opinions are used and as a result we had the hierarchy of 18 ergonomic criteria. The ergonomic criteria are those already validated by the market, which are linked to the ErgoList checklists. The fuzzy model created will allow knowing the most important criteria to health governmental companies. Its Information Technology (IT) professionals will concentrate efforts when treating the usability of the software interface and its systems. (author)

Green ergonomics: definition and scope.

Science.gov (United States)

Thatcher, Andrew

2013-01-01

This paper demonstrates that the goals of ergonomics (i.e. effectiveness, efficiency, health, safety and usability) are closely aligned with the goals of design for environmental sustainability. In this paper, the term 'green ergonomics' is conceptualised to specifically describe ergonomics interventions with a pro-nature emphasis. Green ergonomics is focused on the bi-directional connections between human systems and nature. This involves looking at (1) how ergonomics design and evaluation might be used to conserve, preserve, and restore nature and (2) how ecosystem services might be harnessed to facilitate the improved wellbeing and effectiveness of human systems. The paper proposes the scope of green ergonomics based on these bi-directional relationships in the areas of the design of low resource systems and products, the design of green jobs, and the design for behaviour change. Suggestions for further work in the green ergonomics domain are also made. Given the enormous environmental challenges facing modern industrial society, this paper encourages ergonomics science to embrace a pro-nature understanding of work design and research. This paper sets out the role for green ergonomics based on an appreciation of the human-nature connections that have been integrated with our understanding of ergonomics science and practice.

Economic evaluation of a participatory ergonomics intervention in a textile plant.

Science.gov (United States)

Tompa, Emile; Dolinschi, Roman; Natale, Julianne

2013-05-01

In this study we report on the economic evaluation of a participatory ergonomics process undertaken at a clothing manufacturer in Southwestern Ontario, Canada that employs approximately 300 workers. We undertake a cost-benefit analysis from the company perspective. Intervention costs amounted to $65,787 and intervention benefits $360,614 (2011 Canadian dollars). The net present value was $294,827, suggesting that the intervention was worth undertaking based on the costs and consequences over the measurement period spanning more than four years. Based on these costs and benefits, the benefit-to-cost ratio is 5.5. Overall, the findings from this study suggest that participatory ergonomics interventions can be cost beneficial from the company perspective. Even though the changes were typically low-cost and low-tech interventions implemented by the plant mechanics and maintenance personnel, benefits were realized on both the health and financial fronts. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI) in Virtual Environment

OpenAIRE

Erlinda Muslim; Boy Nurtjahyo; Romadhani Ardi

2011-01-01

This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics  study  using Posture Evaluation Index (PEI). PEI integrates  the scores of  low back analysi...

Action-oriented use of ergonomic checkpoints for healthy work design in different settings.

Science.gov (United States)

Kogi, Kazutaka

2007-12-01

Recent experiences in the action-oriented use of ergonomic checkpoints in different work settings are reviewed. The purpose is to know what features are useful for healthy work design adjusted to each local situation. Based on the review results, common features of ergonomic checkpoints used in participatory training programs for improving workplace conditions in small enterprises, construction sites, home work and agriculture in industrially developing countries in Asia are discussed. These checkpoints generally compile practical improvement options in a broad range of technical areas, such as materials handling, workstation design, physical environment and work organization. Usually, "action checklists" comprising the tiles of the checkpoints are used together. A clear focus is placed on readily applicable low-cost options. Three common features of these various checkpoints appear to be important. First, the checkpoints represent typical good practices in multiple areas. Second, each how-to section of these checkpoints presents simple improvements reflecting basic ergonomic principles. Examples of these principles include easy reach, fewer and faster transport, elbow-level work, coded displays, isolated or screened hazards and shared teamwork. Third, the illustrated checkpoints accompanied by corresponding checklists are used as group work tools in short-term training courses. Many practical improvements achieved are displayed in websites for inter-country work improvement networks. It is suggested to promote the use of locally adjusted checkpoints in various forms of participatory action-oriented training in small-scale workplaces and in agriculture particularly in industrially developing countries.

A Comprehensive Approach for the Ergonomic Evaluation of 13 Emergency and Transport Ventilators.

Science.gov (United States)

Marjanovic, Nicolas; L'Her, Erwan

2016-05-01

Mechanical ventilation is an important part of emergency medicine and is frequently used for transportation. Human errors during ventilator settings are frequent and may be associated with high morbidity/mortality. The aim of the study was to provide a complete ergonomic evaluation of emergency and transport ventilators, taking into account objective and subjective human-machine interface assessments and individual mental work load. We performed a prospective bench ergonomic evaluation of 13 emergency and transport ventilators, using standardized conditions and a global methodological approach. The study was performed in an evaluation laboratory dedicated to respiratory care, and 12 emergency physicians unfamiliar with the tested devices were included in the evaluation. The ventilators were classified into 3 categories (simple, sophisticated, and ICU-like). Objective chronometric evaluations were conducted considering 9 tasks, and subjective evaluations were performed (ease of use, willingness to use, and user-friendliness of monitoring) using Likert scales. Mental work load evaluation was performed using the NASA Task Load Index scale. Overall task failure rate represented 4% of all attempts. Setting modifications, ventilation mode changes, and powering down durations were different between simple and other emergency and transport ventilator categories (P < .005). There was no difference between ventilator categories for the ease of use and user-friendliness of the monitoring. In contrast, the willingness to use was lower for simple devices, compared with sophisticated and ICU-like emergency and transport ventilators (2.9 ± 1.4 vs 3.9 ± 1.2, P = .002 and 4.3 ± 1, P < .001). No differences were observed between devices regarding the mental work load, except for several specific devices in the sophisticated category. A comprehensive ergonomic evaluation provides valuable information while investigating operational friendliness in emergency and transport

Participatory ergonomics intervention for improving work-related musculoskeletal disorders in the 'One Tambon One Product' industry in Thailand.

Science.gov (United States)

Hongsranagon, Prathurng; Somana, Yaowanit; Maha-Udomporn, Somkiet; Siriwong, Wattasit; Havanond, Piyalamporn; Deelertyuenyong, Nathawan; Petchprasit, Viroj; Munkatunyu, Nantawadee; Saksri, Pramrudee

2011-12-01

This paper relates to the first phase one of a three-phase study. Phase 1 investigated and identified risk factors for work-related musculoskeletal disorders (WMSDs) in 26 'One Tambon One Product' (OTOP) groups working in the informal sector. Data was collected from 93 participants in Khangkoi District, Saraburi Province, Thailand during 2009-2010. Results of inspections and direct observations of work places and interviews of managers and workers showed risk factors related to posture, repetition, force and duration in the workers' operations and the application of a checklist revealed that the OTOP groups had simple work processes. A knowledge-attitude-practice survey of managers and workers indicated that there was a moderate to high awareness regarding ergonomics and occupational safety and health principles and approximately 15% of workers reported WMSDs at a moderate level, mainly associated with lower back and shoulder pains, due to protracted periods of sitting. Specific recommendations in response to OTOP conditions and needs were made. The second phase of the study involves a participatory ergonomics worksite intervention by a number of stakeholders and the final phase deals with an evaluation of the intervention and an establishment of guidelines for ergonomics programs for OTOP groups.

Limited economic evaluation to assess the effectiveness of a university-wide office ergonomics program.

Science.gov (United States)

Bidassie, Balmatee; McGlothlin, James D; Goh, Alina; Feyen, Robert G; Barany, James W

2010-05-01

The objective of this research was to evaluate the effectiveness and provide a limited economic evaluation of an office ergonomics program at a major university from 1995 to 2007. The relationship between office-related recordable injuries, reported lost time, severity of these injuries, and the Workers' Compensation (WC) paid was analyzed and the corresponding incident cost was calculated. Two major datasets analyzed were OSHA 200/300 logs (1991-2007) and WC claims paid (1999-2007). Since the beginning of the office ergonomics program in 1995 and through 2007 (13-year period), the number of office cumulative trauma disorder (CTD) cases decreased by 53%. Since the official start (in 1999) of a 50-50 cost share agreement for office equipment purchases between the university's Safety and Health Department (SHD) and the university departments evaluated, it was observed that the incident rate decreased by 63%, Total Days Away/restrict or Transfer (DART) rate decreased by 41%, Lost Time Case (LTC) rate decreased by 71% and office-related carpal tunnel syndrome decreased by almost 50%. The long-term goal of this research is to demonstrate the self-sustainability of an office ergonomics program by showing that equipment costs are eventually offset by a decrease in WC claims paid and lost time from office-related injuries and illnesses. While limited, this research helps in cost-justifying the implementation of future office ergonomics programs for large organizations. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Checklist for Evaluating SREB-SCORE Learning Objects

Science.gov (United States)

Southern Regional Education Board (SREB), 2007

2007-01-01

This checklist is based on "Evaluation Criteria for SREB-SCORE Learning Objects" and is designed to help schools and colleges determine the quality and effectiveness of learning objects. It is suggested that each learning object be rated to the extent to which it meets the criteria and the SREB-SCORE definition of a learning object. A learning…

Evaluation of a Participatory Ergonomics Intervention in Small Commercial Construction Firms

Science.gov (United States)

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Gardner, Bethany T.; Buchholz, Bryan; Weaver, Nancy; Evanoff, Bradley A.

2017-01-01

Background Work-related musculoskeletal disorders (WMSD) among construction workers remain high. Participatory ergonomics (PE) interventions that engage workers and employers in reducing work injury risks have shown mixed results. Methods Eight-six workers from seven contractors participated in a PE program. A logic model guided the process evaluation and summative evaluation of short term and intermediate impacts and long term outcomes from surveys and field records. Results Process measures showed good delivery of training, high worker engagement, and low contractor participation. Workers’ knowledge improved and workers reported changes to work practices and tools used; contractor provision of appropriate equipment was low (33%). No changes were seen in symptoms or reported physical effort. Conclusions The PE program produced many worker-identified ergonomic solutions, but lacked needed support from contractors. Future interventions should engage higher levels of the construction organizational system to improve contractor involvement for reducing WMSD. PMID:27094450

Ergonomic sustainability based on the ergonomic maturity level measurement.

Science.gov (United States)

Vidal, Mario Cesar; Guizze, Carmen Lucia Campos; Bonfatti, Renato José; Silva e Santos, Marcello

2012-01-01

This paper aims at the application of an ergonomic maturity model (EMM), in order to assess the ergonomic sustainability outreach of ergonomic actions. This proposition was motivated by the widespread sensation that the development of the discipline, its educational devices and related practices depends on the attitude of ergonomics practitioners rather than environmental macroergonomic conditions. Maturity modeling in this paper is undertaken as a tool for ergonomic practitioners. Thus, its foundations were uprooted from diverse fields: Clinic Psychology, Quality Management and Project Management. The paper brings about a detailled explanation of this ergonomic maturity tool. The empirical part is fulfilled by the examination - using the EMM - of four emblematic cases excerpted from our research lab ergonomic portfolio.

Implantation of an ergonomics administration system in a company: report of an occupational therapist specialist in ergonomics.

Science.gov (United States)

Moraes, Berla; Andrade, Valéria Sousa

2012-01-01

This article aims to describe step-by-step the implementation of an ergonomics administration system in a company from March 2009 till March 2011 by an occupational therapist specialist in ergonomics based on the OSHAS 18001 guidelines and the Regulatory Norms 17 manual. The process began with the definition of five requisites with bases on the manual of application of the Regulatory Norms 17: survey; materials individual transportation and discharge; workplace furniture; workplace equipments; work environment and organization of the work to be managed with bases on the OSHAS 18001 guidelines. The following steps were established: sensitization of the company high administration, elaboration and institution of an ergonomics politics, development of ergonomics committees, ergonomics analysis of the work with recommendation of ergonomic improvements, implantation of improvements and evaluation or the results. This research experiment suggests the importance not only of a guiding axle but also of a professional qualification and participation of the company on the implementation of an ergonomics management system.

Ergonomic design and evaluation of a diagnostic ultrasound transducer holder.

Science.gov (United States)

Ghasemi, Mohamad Sadegh; Hosseinzadeh, Payam; Zamani, Farhad; Ahmadpoor, Hossein; Dehghan, Naser

2017-12-01

Work-related musculoskeletal disorders (WMSDs) are injuries and disorders that affect the body's movement and musculoskeletal system. Awkward postures represent one of the major ergonomic risk factors that cause WMSDs among sonographers while working with an ultrasound transducer. This study aimed to design and evaluate a new holder for the ultrasound transducer. In the first phase a new holder was designed for the transducer, considering design principles. Evaluation of the new holder was then carried out by electrogoniometry and a locally perceived discomfort (LPD) scale. The application of design principles to the new holder resulted in an improvement of wrist posture and comfort. Wrist angles in extension, flexion, radial deviation and ulnar deviation were lower with utilization of the new holder. The severity of discomfort based on the LPD method in the two modes of work with and without the new holder was reported with values of 1.3 and 1.8, respectively (p ergonomics design principles was effective in minimizing wrist deviation and increasing comfort while working with the new holder.

A challenge-response endoscopic sinus surgery specific checklist as an add-on to standard surgical checklist: an evaluation of potential safety and quality improvement issues.

Science.gov (United States)

Sommer, Doron D; Arbab-Tafti, Sadaf; Farrokhyar, Forough; Tewfik, Marc; Vescan, Allan; Witterick, Ian J; Rotenberg, Brian; Chandra, Rakesh; Weitzel, Erik K; Wright, Erin; Ramakrishna, Jayant

2018-02-27

The goal of this study was to develop and evaluate the impact of an aviation-style challenge and response sinus surgery-specific checklist on potential safety and equipment issues during sinus surgery at a tertiary academic health center. The secondary goal was to assess the potential impact of use of the checklist on surgical times during, before, and after surgery. This initiative is designed to be utilized in conjunction with the "standard" World Health Organization (WHO) surgical checklist. Although endoscopic sinus surgery is generally considered a safe procedure, avoidable complications and potential safety concerns continue to occur. The WHO surgical checklist does not directly address certain surgery-specific issues, which may be of particular relevance for endoscopic sinus surgery. This prospective observational pilot study monitored compliance with and compared the occurrence of safety and equipment issues before and after implementation of the checklist. Forty-seven consecutive endoscopic surgeries were audited; the first 8 without the checklist and the following 39 with the checklist. The checklist was compiled by evaluating the patient journey, utilizing the available literature, expert consensus, and finally reevaluation with audit type cases. The final checklist was developed with all relevant stakeholders involved in a Delphi method. Implementing this specific surgical checklist in 39 cases at our institution, allowed us to identify and rectify 35 separate instances of potentially unsafe, improper or inefficient preoperative setup. These incidents included issues with labeling of topical vasoconstrictor or injectable anesthetics (3, 7.7%) and availability, function and/or position of video monitors (2, 5.1%), endoscope (6, 15.4%), microdebrider (6, 15.4%), bipolar cautery (6, 15.4%), and suctions (12, 30.8%). The design and integration of this checklist for endoscopic sinus surgery, has helped improve efficiency and patient safety in the operating

Participatory ergonomics for psychological factors evaluation in work system design.

Science.gov (United States)

Wang, Lingyan; Lau, Henry Y K

2012-01-01

It is a well recognized understanding that workers whose voice needs to be heard should be actively encouraged as full participants and involved in the early design stages of new ergonomic work system which encompass the development and implementation of new tools, workplaces, technologies or organizations. This paper presents a novel participatory strategy to evaluate three key psychological factors which are respectively mental fatigue, spiritual stress, and emotional satisfaction in work system design based on a modified version of Participatory Ergonomics (PE). In specific, it integrates a PE technique with a formulation view by combining the parallel development of PE strategies, frameworks and functions throughout the coverage of the entire work system design process, so as to bridge the gap between qualitative and quantitative analysis of psychological factors which can cause adverse or advantageous effects on worker's physiological and behavioral performance.

Evaluation of a participatory ergonomics intervention in small commercial construction firms.

Science.gov (United States)

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Gardner, Bethany T; Buchholz, Bryan; Weaver, Nancy; Evanoff, Bradley A

2016-06-01

Work-related musculoskeletal disorders (WMSD) among construction workers remain high. Participatory ergonomics (PE) interventions that engage workers and employers in reducing work injury risks have shown mixed results. Eight-six workers from seven contractors participated in a PE program. A logic model guided the process evaluation and summative evaluation of short-term and intermediate impacts and long-term outcomes from surveys and field records. Process measures showed good delivery of training, high worker engagement, and low contractor participation. Workers' knowledge improved and workers reported changes to work practices and tools used; contractor provision of appropriate equipment was low (33%). No changes were seen in symptoms or reported physical effort. The PE program produced many worker-identified ergonomic solutions, but lacked needed support from contractors. Future interventions should engage higher levels of the construction organizational system to improve contractor involvement for reducing WMSD. Am. J. Ind. Med. 59:465-475, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Green ergonomics: combining sustainability and ergonomics.

Science.gov (United States)

Pilczuk, Davana; Barefield, Kevin

2014-01-01

When discussing ergonomics, the term 'sustainability' usually refers to the preservation of the human workforce. However, in 2010 Gulfstream Aerospace Corporation made a conscious effort to combine ergonomics and environmental sustainability in order to increase employee engagement for both programs. They introduced a companywide campaign called Green Ergo which is the idea of creating ergonomic solutions from scrap material found on site. This concept embraced the true meaning of 'green' and encouraged engineers and employees all across the company to design innovative green ergonomic solutions. The idea generated over 35 new ergo solutions, reduced waste production, and solved over 700 ergo problems for a fraction of the cost of newly purchased items. The demand for these items grew large enough that the company outsourced their manufacturing to a local non-profit. The Green Ergo campaign has changed the culture of the company and has increased the level of buy-in for both the ergonomics and sustainability programs.

Ergonomic Analysis of UI’s BicyclesUsing Posture Evaluation Index (PEI Method in Virtual Environment

Directory of Open Access Journals (Sweden)

Erlinda Muslim

2010-10-01

Full Text Available This research was conducted to study ergonomic aspect from University of Indonesia bicycle in virtual environment. Software Jack 6.0 was used to analyze it. PEI was used as approach that integrated the results of three methods: Lower Back Analysis, Ovako Working Posture Analysis, and Rapid Upper Limb Assessment. The research objective is to evaluate existing design of University of Indonesia bicycle and to determine the most ergonomic redesign which concern with handlebar height and saddle height modification. The result showed that the most ergonomic design of University of Indonesia bicycle is the one with the highest handlebar height (22 cm and the lowest saddle height (11 cm.

Green buildings need good ergonomics.

Science.gov (United States)

Hedge, A; Dorsey, J A

2013-01-01

A retrospective post-occupancy evaluation survey of 44 occupants in two Leadership in Energy and Environmental Design (LEED) Platinum buildings on a US college campus is reported. The Internet survey covered a range of indoor environment and ergonomics issues. Results show that working in these buildings were a generally positive experience for their health, performance and satisfaction. However, in one building there were persistent issues of variability in air temperature, air freshness, air quality and noise that affected the perceived health and performance of the occupants. Although the buildings were energy-efficient and sustainable structures, ergonomics design issues were identified. Implications for the role of ergonomics in green buildings and in the US LEED rating system are discussed. This survey identified a number of ergonomics design issues present in the LEED Platinum energy-efficient and sustainable buildings that were studied. These results highlight the importance of integrating ergonomics design into green buildings as a component in the US LEED rating system.

Ergonomics in dental pratice

Directory of Open Access Journals (Sweden)

Lucas Quaresemin de Oliveira

2017-08-01

Full Text Available The application of ergonomics is critical so that you can get a suitable working environment for professional, it is safe, healthy and comfortable. The objective was to identify whether the dental students followed the principles of ergonomics during clinical visits, evaluating, through photographs, compliance with ergonomic principles applied in dental practice, and finally identify the most affected sites by RSI / WMSDs of students enrolled in the dental clinic of the Faculdade IMED. Snapshots were made and only considered the position of the student operator, the same taken by the researcher using the mobile device. For each clinical procedure were taken two photographs in hidden angles to the student operator so that it did not change its ergonomic position to be observed. After obtaining the photos, they were evaluated and classified in scores from 0 to 3 according to the adequacy of the work placement, and then inserted into Excel and later in a database (SPSS 15.0. The following work is a cross-sectional, observational study, they were conducted in dental clinics IMED college. Among the 66 respondents, 14 were male and 52 female. It was found that 57 (86,3% reported feeling pain somewhere in the body, being the most affected sites neck (36.4%, and consecutively lower back (30.3% and higher than the back (27.3%. The results of the 63 procedures performed by the photographic shots were classified as “inadequate” in 49 procedures, “partially adequate” in 12 and “impossible to evaluate” in 2 procedures. The research results have shown a high prevalence of musculoskeletal pain and do not follow the ergonomic principles, emphasizing the need for more attention to ergonomics of the students.

Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI in Virtual Environment

Directory of Open Access Journals (Sweden)

Erlinda Muslim

2011-09-01

Full Text Available This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics  study  using Posture Evaluation Index (PEI. PEI integrates  the scores of  low back analysis (LBA, ovako working  posture  (OWAS,  and  rapid  upper  limb assessment  (RULA.  Analysis  phase  was  done  using  digital  human model  in  virtual  environment  that  available  on  Jack  6.0.  The  results show  that  the  working  conditions  in  garment industry had enough amount of risk that can injured the musculoskeletal system of the workers. This research enriches the  body  of  ergonomics  knowledge  in Indonesia  because  it  is  the  first  research  in  Indonesia that  applied  virtual environment approach to ergonomics analysis in industry.

Developing measures for information ergonomics in knowledge work.

Science.gov (United States)

Franssila, Heljä; Okkonen, Jussi; Savolainen, Reijo

2016-03-01

Information ergonomics is an evolving application domain of ergonomics focusing on the management of workload in the real-world contexts of information-intensive tasks. This study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, five key dimensions of information ergonomics were identified: contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity. In total, 24 measures focusing on the above dimensions were constructed. The measures include, for example, the number of fragmented work tasks per work day. The measures were preliminarily tested in two Finnish organisations, making use of empirical data gathered by interviews, electronic questionnaires and log data applications tracking work processes on personal computers. The measures are applicable to the evaluation of information ergonomics, even though individual measures vary with regard to the amount of work and time needed for data analysis. Practitioner Summary: The study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, 24 measures were constructed and tested empirically. The measures focus on contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity.

Ergonomics Considerations in Microcomputing.

Science.gov (United States)

Torok, Andrew G.

1984-01-01

Discusses evolution of ergonomics and development of computer ergonomics with its sub-fields of hardware ergonomics (user-equipment-related problems including workstation design); software ergonomics (problems in communication with computers); and peopleware ergonomics (psychological impact). Ergonomic features of VDTs, keyboards, and printers are…

A new system for evaluation of armrest use in robotic surgery and validation of a new ergonomic concept - armrest load.

Science.gov (United States)

Yang, K; Perez, M; Perrenot, C; Hubert, N; Felblinger, J; Hubert, J

2016-12-01

The da Vinci robot provides a sitting position and an armrest to decrease workload and increase dexterity. We investigated the surgeon's ergonomic behaviour by installing force sensors on the dV-Trainer® simulator's armrest to measure the 'armrest load' during the performance of simulated exercises. Five experts and 48 novices performed two robotic simulation exercises on the dV-Trainer. We calculated the armrest load and evaluated their armrest-using habits. Overall score and workspace range were evaluated automatically by the simulator and compared with armrest load. Statistically significant differences exist for overall score, workspace range and armrest load between novices and experts. The armrest load score is a direct, sensitive measure for the ergonomic evaluation of a simulator's armrest use. This experience-dependent ergonomic difference between experts and novices (p = 0.007) highlights the importance of ergonomic training for novice robot users. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

Ergonomics in the licensing and evaluation of nuclear reactors control room

International Nuclear Information System (INIS)

Santos, Isaac Jose Antonio Luquetti dos; Vidal, Mario Cesar Rodriguez

2002-01-01

A nuclear control room is a complex system that controls a thermodynamic process used to produce electrical energy. The operators interact with the control room through interfaces that have significant implications to nuclear plant safety and influence the operator activity. The TMI (Three Mile Island) accident demonstrated that only the anthropometric aspects were not enough for an adequate nuclear control room design. The studies showed that the accident was aggravated because the designers had not considered adequately human factor aspects. After TMI accident, the designers introduce in the nuclear control room development only human factors standards and human factors guidelines. The ergonomics approaches was not considered. Our objective is introduce in nuclear control room design and nuclear control room evaluation, a methodology that. includes human factors standards, human factors guidelines and ergonomic approaches, the operator activity analysis. (author)

Evaluating the Ergonomics of Flexible Ureteroscopy.

Science.gov (United States)

Ludwig, Wesley W; Lee, Gyusung; Ziemba, Justin B; Ko, Joan S; Matlaga, Brian R

2017-10-01

To date, the ergonomics of flexible ureteroscopy (URS) have not been well described. We performed a study to assess the biomechanical stresses on urologists performing URS and to investigate the effect of ureteroscope type on these parameters. Electromyography (EMG) was used to quantify the activation level of muscle groups involved in URS. Surface EMG electrodes (Delsys, Boston, MA) were placed on the right and left thenar, flexor carpi ulnaris (FCU), extensor carpi ulnaris (ECU), biceps, triceps, and deltoid. Three endoscopes were studied: single-use digital (Boston Scientific LithoVue), reusable digital (Karl Storz Flex-X c ), and reusable fiber-optic (Karl Storz Flex-X 2 ). Each ureteroscope was used to perform a set sequence of navigation and procedural tasks in a training model. EMG data were processed and normalized to compare the maximum voluntary contractions between muscle groups. Cumulative muscular workload (CMW) and average muscular work per second (AWS) were used for comparative analysis. For navigational tasks, CMW and AWS were greatest for the ECU, followed in descending order by right and left thenar, FCU, biceps, deltoid, and triceps. For procedural tasks, CMW and AWS were greatest for the right thenar, followed in descending order by the left thenar, ECU, FCU, triceps, biceps, and deltoid. During navigational tasks, both LithoVue and Flex-X c had lower CMWs for every muscle group than Flex-X 2 (p ergonomics of URS. Both the single-use and reusable digital ureteroscopes have similar profiles, and both have significantly better ergonomic metrics than the reusable fiber-optic ureteroscope.

Evaluation of ergonomic physical risk factors in a truck manufacturing plant: case study in SCANIA Production Angers.

Science.gov (United States)

Zare, Mohsen; Malinge-Oudenot, Agnes; Höglund, Robert; Biau, Sophie; Roquelaure, Yves

2016-01-01

The aims of this study were 1) to assess the ergonomic physical risk factors from practitioner's viewpoint in a truck assembly plant with an in-house observational method and the NIOSH lifting equation, and 2) to compare the results of both methods and their differences. The in-house ergonomic observational method for truck assembly i.e. the SCANIA Ergonomics Standard (SES) and the NIOSH lifting equation were applied to evaluate physical risk factors and lifting of loads by operators. Both risk assessment approaches revealed various levels of risk, ranging from low to high. Two workstations were identified by the SES method as high risk. The NIOSH lifting index (LI) was greater than two for four lifting tasks. The results of the SES method disagreed with the NIOSH lifting equation for lifting tasks. Moreover, meaningful variations in ergonomic risk patterns were found for various truck models at each workstation. These results provide a better understanding of the physical ergonomic exposure from practitioner's point of view in the automotive assembly plant.

Ergonomics observation: Harvesting tasks at oil palm plantation.

Science.gov (United States)

Ng, Yee Guan; Shamsul Bahri, Mohd Tamrin; Irwan Syah, Md Yusoff; Mori, Ippei; Hashim, Zailina

2014-01-01

Production agriculture is commonly associated with high prevalence of ergonomic injuries, particularly during intensive manual labor and during harvesting. This paper intends to briefly describe an overview of oil palm plantation management highlighting the ergonomics problem each of the breakdown task analysis. Although cross-sectional field visits were conducted in the current study, insight into past and present occupational safety and health concerns particularly regarding the ergonomics of oil palm plantations was further exploited. Besides discussion, video recordings were extensively used for ergonomics analysis. The unique commodity of oil palm plantations presents significantly different ergonomics risk factors for fresh fruit bunch (FFB) cutters during different stages of harvesting. Although the ergonomics risk factors remain the same for FFB collectors, the intensity of manual lifting increases significantly with the age of the oil palm trees-weight of FFB. There is urgent need to establish surveillance in order to determine the current prevalence of ergonomic injuries. Thereafter, ergonomics interventions that are holistic and comprehensive should be conducted and evaluated for their efficacy using approaches that are integrated, participatory and cost-effective.

An Independent Human Factors Analysis and Evaluation of the Emergency Medical Protocol Checklist for the International Space Station

Science.gov (United States)

Marshburn, Thomas; Whitmore, Mihriban; Ortiz, Rosie; Segal, Michele; Smart, Kieran; Hughes, Catherine

2003-01-01

Emergency medical capabilities aboard the ISS include a Crew Medical Officer (CMO) (not necessarily a physician), and back-up, resuscitation equipment, and a medical checklist. It is essential that CMOs have reliable, usable and informative medical protocols that can be carried out independently in flight. The study evaluates the existing ISS Medical Checklist layout against a checklist updated to reflect a human factors approach to structure and organization. Method: The ISS Medical checklist was divided into non-emergency and emergency sections, and re-organized based on alphabetical and a body systems approach. A desk-top evaluation examined the ability of subjects to navigate to specific medical problems identified as representative of likely non-emergency events. A second evaluation aims to focus on the emergency section of the Medical Checklist, based on the preliminary findings of the first. The final evaluation will use Astronaut CMOs as subjects comparing the original checklist against the updated layout in the task of caring for a "downed crewmember" using a Human Patient Simulator [Medical Education Technologies, Inc.]. Results: Initial results have demonstrated a clear improvement of the re-organized sections to determine the solution to the medical problems. There was no distinct advantage for either alternative, although subjects stated having a preference for the body systems approach. In the second evaluation, subjects will be asked to identify emergency medical conditions, with measures including correct diagnosis, time to completion and solution strategy. The third evaluation will compare the original and fully updated checklists in clinical situations. Conclusions: Initial findings indicate that the ISS Medical Checklist will benefit from a reorganization. The present structure of the checklist has evolved over recent years without systematic testing of crewmember ability to diagnose medical problems. The improvements are expected to enable ISS

Evaluation of the effect of a laparoscopic robotized needle holder on ergonomics and skills.

Science.gov (United States)

Bensignor, Thierry; Morel, Guillaume; Reversat, David; Fuks, David; Gayet, Brice

2016-02-01

Laparoscopy generates technical and ergonomics difficulties due to limited degrees of freedom (DOF) of forceps. To reduce this limitation, a new 5-mm robotized needle holder with two intracorporeal DOF, Jaimy(®), has been developed. The aim of this study was to evaluate its effects on ergonomics and skills. Fourteen surgeons including eight senior and six residents were crossover randomized and stratified based on experience. Three suturing tasks were performed with both Jaimy(®) and a classic needle holder (NH): task 1: Peg-Board; task 2: hexagonal suture; task 3: frontal suture. Postural ergonomics of the dominant arm were evaluated with an ergonomics score (RULA score) thanks to motion capture, and muscular ergonomics with electromyography of six muscular groups (flexor and extensor carpis, biceps, triceps, deltoid, trapeze). Performance outcomes are a quantitative and qualitative score, and skills outcomes are the measurement of the number of movements and the path length travelled by the instrument. The RULA score showed a statistically improved posture with Jaimy(®) (p < 0.001). The cumulative muscular workload (CMW) of four muscles was not different. However, the CMW was in favor of the NH for the flexor carpi ulnaris (p < 0.001) and the triceps (p = 0.027). The number of movements was not different (p = 0.39) although the path length was shorter with Jaimy(®) (p = 0.012). The score for task 1 was in favor of the NH (p = 0.006) with a higher quantity score. Task 2 score was not different (p = 0.086): The quality part of the score was in favor of Jaimy(®) (p = 0.009) and the quantity part was higher with the NH (p = 0.04). The score for task 3 was higher with Jaimy(®) (p = 0.001). This study suggests that the use of a robotized needle holder improves both posture and the quality of laparoscopic sutures.

Ergonomic deficits in robotic gynecologic oncology surgery: a need for intervention.

Science.gov (United States)

Craven, Renatta; Franasiak, Jason; Mosaly, Prithima; Gehrig, Paola A

2013-01-01

To evaluate surgeon strain using validated ergonomic assessment tools. Observational study (Canadian Task Force classification III). Academic medical center. Robotic surgeons performing gynecologic oncology surgical procedures. Videotape footage of surgeons performing robotic gynecologic oncology procedures was obtained. A human factors engineer experienced with health care ergonomics analyzed the video recordings and performed ergonomic evaluations of the surgeons. An initial evaluation was conducted using the Rapid Upper Limb Assessment (RULA) survey, an ergonomic assessment and prioritization method for determining posture, force, and frequency concerns with focus on the upper limbs. A more detailed analysis followed using the Strain Index (SI) method, which uses multiplicative interactions to identify jobs that are potentially hazardous. Seventeen hours of video recordings were analyzed, and descriptive data based on RULA/SI analysis were collected. Ergonomic evaluation of surgeon activity resulted in a mean RULA score of 6.46 (maximum possible RULA score, 7), indicating a need for further investigation. The mean SI grand score was 24.34. SI scores >10 suggest a potential for hazard to the operator. Thus, the current use of the surgical robot is potentially dangerous with regards to ergonomic positioning and should be modified. At a high-volume robotics center, there are ergonomics deficits that are hazardous to gynecologic surgeons and suggest the need for modification and intervention. A training strategy must be developed to address these ergonomic issues and knowledge deficiencies. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

What price ergonomics?

OpenAIRE

Stanton, NA; Young, MS

1999-01-01

Ergonomists have a say in the design of almost everything in the modern world, but there is little evidence that their methods actually work. Here is an evaluation of those methods and of the worth of ergonomics in design.

Virtual reality applied in the ergonomic evaluation of nuclear power plant control room

International Nuclear Information System (INIS)

Gatto, Leandro Barbosa da Silveira

2012-01-01

A nuclear power plant control room is a complex system that controls a nuclear and thermodynamic process used to produce electrical energy. The operators interact with the control room through interfaces that have significant implications to nuclear power plant safety and influence the operator activity. The operator activity presents complexity features and shows a series of mechanisms absents from the human factors guidelines, important to the evaluation and update of control rooms. The ergonomics approach considers the operation strategies, the interaction between the operators, the operator-system interaction, and interaction between operators and support groups. The main objective of this paper is propose the modeling of a nuclear control room, with the support of a game engine core. This tool will be used in the ergonomic evaluation of nuclear control room, generating information and data that will make possible the adequacy of control rooms features to the legal requirements of the regulating agency, assisting the nuclear licensing. (author)

[ICF-Checklist to Evaluate Inclusion of Elderlies with Intellectual Disability - Psychometric Properties].

Science.gov (United States)

Queri, Silvia; Eggart, Michael; Wendel, Maren; Peter, Ulrike

2017-11-28

Background An instrument should have been developed to measure participation as one possible criterion to evaluate inclusion of elderly people with intellectual disability. The ICF was utilized, because participation is one part of health related functioning, respectively disability. Furthermore ICF includes environmental factors (contextual factors) and attaches them an essentially influence on health related functioning, in particular on participation. Thus ICF Checklist additionally identifies environmental barriers for elimination. Methodology A linking process with VINELAND-II yielded 138 ICF items for the Checklist. The sample consists of 50 persons with a light or moderate intellectual disability. Two-thirds are female and the average age is 68. They were directly asked about their perceived quality of life. Additionally, proxy interviews were carried out with responsible staff members concerning necessary support and behavioral deviances. The ICF Checklist was administered twice, once (t2) the current staff member should rate health related functioning at the given time and in addition, a staff member who knows the person at least 10 years before (t1) should rate the former functioning. Content validity was investigated with factor analysis and criterion validity with correlational analysis related to supports need, behavioral deviances and perceived quality of life. Quantitative analysis was validated by qualitative content analysis of patient documentation. Results Factor analysis shows logical variable clusters across the extracted factors but neither interpretable factors. The Checklist is reliable, valid related to the chosen criterions and shows the expected age-related shifts. Qualitative analysis corresponds with quantitative data. Consequences/Conclusion ICF Checklist is appropriate to manage and evaluate patient-centered care. © Georg Thieme Verlag KG Stuttgart · New York.

The economic evaluation of a Participatory Ergonomics programme to prevent low back and neck pain

NARCIS (Netherlands)

Driessen, M.; Bosmans, J.; Proper, K.; Anema, J.; Bongers, P.; Beek, A. van der

2012-01-01

This study was an economic evaluation conducted alongside a cluster randomised controlled trial with a follow-up of 12 months. The aim was to evaluate the cost-effectiveness and cost-benefit of the Stay@Work Participatory Ergonomics programme (PE) compared to a control group (no PE). In total, 37

Ergonomic Evaluations of Microgravity Workstations

Science.gov (United States)

Whitmore, Mihriban; Berman, Andrea H.; Byerly, Diane

1996-01-01

Various gloveboxes (GBXs) have been used aboard the Shuttle and ISS. Though the overall technical specifications are similar, each GBX's crew interface is unique. JSC conducted a series of ergonomic evaluations of the various glovebox designs to identify human factors requirements for new designs to provide operator commonality across different designs. We conducted 2 0g evaluations aboard the Shuttle to evaluate the material sciences GBX and the General Purpose Workstation (GPWS), and a KC-135 evaluation to compare combinations of arm hole interfaces and foot restraints (flexible arm holes were better than rigid ports for repetitive fine manipulation tasks). Posture analysis revealed that the smallest and tallest subjects assumed similar postures at all four configurations, suggesting that problematic postures are not necessarily a function of the operator s height but a function of the task characteristics. There was concern that the subjects were using the restrictive nature of the GBX s cuffs as an upper-body restraint to achieve such high forces, which might lead to neck/shoulder discomfort. EMG data revealed more consistent muscle performance at the GBX; the variability in the EMG profiles observed at the GPWS was attributed to the subjects attempts to provide more stabilization for themselves in the loose, flexible gauntlets. Tests revealed that the GBX should be designed for a 95 percentile American male to accommodate a neutral working posture. In addition, the foot restraint with knee support appeared beneficial for GBX operations. Crew comments were to provide 2 foot restraint mechanical modes, loose and lock-down, to accommodate a wide range of tasks without egressing the restraint system. Thus far, we have developed preliminary design guidelines for GBXs and foot.

Optimizing the physical ergonomics indices for the use of partial pressure suits.

Science.gov (United States)

Ding, Li; Li, Xianxue; Hedge, Alan; Hu, Huimin; Feathers, David; Qin, Zhifeng; Xiao, Huajun; Xue, Lihao; Zhou, Qianxiang

2015-03-01

This study developed an ergonomic evaluation system for the design of high-altitude partial pressure suits (PPSs). A total of twenty-one Chinese males participated in the experiment which tested three types of ergonomics indices (manipulative mission, operational reach and operational strength) were studied using a three-dimensional video-based motion capture system, a target-pointing board, a hand dynamometer, and a step-tread apparatus. In total, 36 ergonomics indices were evaluated and optimized using regression and fitting analysis. Some indices that were found to be linearly related and redundant were removed from the study. An optimal ergonomics index system was established that can be used to conveniently and quickly evaluate the performance of different pressurized/non-pressurized suit designs. The resulting ergonomics index system will provide a theoretical basis and practical guidance for mission planners, suit designers and engineers to design equipment for human use, and to aid in assessing partial pressure suits. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Dental Hygiene Students' Self-Assessment of Ergonomics Utilizing Photography.

Science.gov (United States)

Partido, Brian B

2017-10-01

Due to postural demands, dental professionals are at high risk for developing work-related musculoskeletal disorders (WMSDs). Dental clinicians' lack of ergonomic awareness may impede the clinical application of recommendations to improve their posture. The aim of this study was to determine whether feedback involving photography and self-assessment would improve dental hygiene students' ergonomic scores and accuracy of their ergonomic self-assessments. The study involved a randomized control design and used a convenience sample of all 32 junior-year dental hygiene students enrolled in the autumn 2016 term in The Ohio State University baccalaureate dental hygiene program. Sixteen students were randomly assigned to each of two groups (control and training). At weeks one and four, all participants were photographed and completed ergonomic self-evaluations using the Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks two and three, participants in the training group were photographed again and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were given ergonomic scores by three raters. Students' self-assessments in the control group and faculty evaluations of the training group showed significant improvement in scores over time (F(1,60)=4.25, p<0.05). In addition, the accuracy of self-assessment significantly improved for students in the training group (F(1,30)=8.29, p<0.01). In this study, dental hygiene students' self-assessments using photographs resulted in improvements in their ergonomic scores and increased accuracy of their ergonomic self-assessments. Any improvement in ergonomic score or awareness can help reduce the risks for WMSDs, especially among dental clinicians.

A randomized controlled trial of the effect of participatory ergonomic low back pain training on workplace improvement.

Science.gov (United States)

Kajiki, Shigeyuki; Izumi, Hiroyuki; Hayashida, Kenshi; Kusumoto, Akira; Nagata, Tomohisa; Mori, Koji

2017-05-25

This study aimed to determine the effects of participatory workplace improvement (PWI) -based provision of ergonomic training and ergonomic action checklists (ACLs) to on-site managers on workplace improvement activities for low back pain (LBP). A randomized controlled trial (RCT) was conducted at a manufacturing company in Japan. Teams entered in the study were randomly assigned to a control and an intervention group. A total of three interventional training sessions on methods of ergonomics were provided to on-site managers in the intervention group, with 1-month intervals between sessions. Ergonomic ACLs were provided at the same time. After completion of the training sessions, each team then provided a report of improvements each month for the next 10 months. Two people in charge of safety and health chose two major objectives of the implemented activities from the five categories. The reported number of improvements was analyzed using a Poisson regression model. In the intervention group, although the incident rate ratio (IRR) of PWIs in countermeasures for the LBP category was significantly elevated after the training sessions, the IRR of improvements decreased over time during the 10-month follow-up period. No significant difference was observed in the IRR of total PWIs in either the control or intervention group. PWI-based provision of ergonomic training sessions and ergonomics ACLs to on-site managers was shown to be effective for workplace improvement activities targeted at LBP. However, because the effects decrease over time, efforts should be made to maintain the effects through regular interventions.

A randomized controlled trial of the effect of participatory ergonomic low back pain training on workplace improvement

Science.gov (United States)

Kajiki, Shigeyuki; Izumi, Hiroyuki; Hayashida, Kenshi; Kusumoto, Akira; Nagata, Tomohisa; Mori, Koji

2017-01-01

Objectives: This study aimed to determine the effects of participatory workplace improvement (PWI) -based provision of ergonomic training and ergonomic action checklists (ACLs) to on-site managers on workplace improvement activities for low back pain (LBP). Methods: A randomized controlled trial (RCT) was conducted at a manufacturing company in Japan. Teams entered in the study were randomly assigned to a control and an intervention group. A total of three interventional training sessions on methods of ergonomics were provided to on-site managers in the intervention group, with 1-month intervals between sessions. Ergonomic ACLs were provided at the same time. After completion of the training sessions, each team then provided a report of improvements each month for the next 10 months. Two people in charge of safety and health chose two major objectives of the implemented activities from the five categories. The reported number of improvements was analyzed using a Poisson regression model. Results: In the intervention group, although the incident rate ratio (IRR) of PWIs in countermeasures for the LBP category was significantly elevated after the training sessions, the IRR of improvements decreased over time during the 10-month follow-up period. No significant difference was observed in the IRR of total PWIs in either the control or intervention group. Conclusions: PWI-based provision of ergonomic training sessions and ergonomics ACLs to on-site managers was shown to be effective for workplace improvement activities targeted at LBP. However, because the effects decrease over time, efforts should be made to maintain the effects through regular interventions. PMID:28320978

Process evaluation of a participatory ergonomics programme to prevent low back pain and neck pain among workers

Directory of Open Access Journals (Sweden)

Driessen Maurice T

2010-08-01

Full Text Available Abstract Background Both low back pain (LBP and neck pain (NP are major occupational health problems. In the workplace, participatory ergonomics (PE is frequently used on musculoskeletal disorders. However, evidence on the effectiveness of PE to prevent LBP and NP obtained from randomised controlled trials (RCTs is scarce. This study evaluates the process of the Stay@Work participatory ergonomics programme, including the perceived implementation of the prioritised ergonomic measures. Methods This cluster-RCT was conducted at the departments of four Dutch companies (a railway transportation company, an airline company, a steel company, and a university including its university medical hospital. Directly after the randomisation outcome, intervention departments formed a working group that followed the steps of PE during a six-hour working group meeting. Guided by an ergonomist, working groups identified and prioritised risk factors for LBP and NP, and composed and prioritised ergonomic measures. Within three months after the meeting, working groups had to implement the prioritised ergonomic measures at their department. Data on various process components (recruitment, reach, fidelity, satisfaction, and implementation components, i.e., dose delivered and dose received were collected and analysed on two levels: department (i.e., working group members from intervention departments and participant (i.e., workers from intervention departments. Results A total of 19 intervention departments (n = 10 with mental workloads, n = 1 with a light physical workload, n = 4 departments with physical and mental workloads, and n = 4 with heavy physical workloads were recruited for participation, and the reach among working group members who participated was high (87%. Fidelity and satisfaction towards the PE programme rated by the working group members was good (7.3 or higher. The same was found for the Stay@Work ergocoach training (7.5 or higher. In total, 66

A social media self-evaluation checklist for medical practitioners.

Science.gov (United States)

Visser, Benjamin J; Huiskes, Florian; Korevaar, Daniel A

2012-01-01

Increasing numbers of medical practitioners and medical students are using online social and business-related networking websites such as Facebook, Doc2doc and LinkedIn. These rapidly evolving and growing social media have potential to promote public health by providing powerful instruments for communication and education. However, evidence is emerging from studies, legal cases, and media reports that the use of these new technologies is creating several ethical problems for medical practitioners as well as medical students. Improper online activities may harm not only individual reputations and careers, but also the medical profession as a whole, for example by breach of patient confidentiality, defamation of colleagues and employers, undisclosed conflict of interests that bias the medical practitioner's medical advice, posting of advice/information without an evidence base, and infringement of copyright. We developed a self-evaluation checklist for medical practitioners using social media. The checklist addresses three key elements in the use of social media: personal information and accessibility, connections, and postings. It contains questions specifically formulated to evaluate a medical practitioner's social media profile, to prevent unintended, improper online activities and to promote professional online behaviour.

Cognition-based development and evaluation of ergonomic user interfaces for medical image processing and archiving systems.

Science.gov (United States)

Demiris, A M; Meinzer, H P

1997-01-01

Whether or not a computerized system enhances the conditions of work in the application domain, very much demands on the user interface. Graphical user interfaces seem to attract the interest of the users but mostly ignore some basic rules of visual information processing thus leading to systems which are difficult to use, lowering productivity and increasing working stress (cognitive and work load). In this work we present some fundamental ergonomic considerations and their application to the medical image processing and archiving domain. We introduce the extensions to an existing concept needed to control and guide the development of GUIs with respect to domain specific ergonomics. The suggested concept, called Model-View-Controller Constraints (MVCC), can be used to programmatically implement ergonomic constraints, and thus has some advantages over written style guides. We conclude with the presentation of existing norms and methods to evaluate user interfaces.

Evaluating a digital ship design tool prototype: Designers' perceptions of novel ergonomics software.

Science.gov (United States)

Mallam, Steven C; Lundh, Monica; MacKinnon, Scott N

2017-03-01

Computer-aided solutions are essential for naval architects to manage and optimize technical complexities when developing a ship's design. Although there are an array of software solutions aimed to optimize the human element in design, practical ergonomics methodologies and technological solutions have struggled to gain widespread application in ship design processes. This paper explores how a new ergonomics technology is perceived by naval architecture students using a mixed-methods framework. Thirteen Naval Architecture and Ocean Engineering Masters students participated in the study. Overall, results found participants perceived the software and its embedded ergonomics tools to benefit their design work, increasing their empathy and ability to understand the work environment and work demands end-users face. However, participant's questioned if ergonomics could be practically and efficiently implemented under real-world project constraints. This revealed underlying social biases and a fundamental lack of understanding in engineering postgraduate students regarding applied ergonomics in naval architecture. Copyright © 2016 Elsevier Ltd. All rights reserved.

A study on the ergonomic assessment in the workplace

Science.gov (United States)

Tee, Kian Sek; Low, Eugene; Saim, Hashim; Zakaria, Wan Nurshazwani Wan; Khialdin, Safinaz Binti Mohd; Isa, Hazlita; Awad, M. I.; Soon, Chin Fhong

2017-09-01

Ergonomics has gained attention and take into consideration by the workers in the different fields of works recently. It has given a huge impact on the workers comfort which directly affects the work efficiency and productivity. The workers have claimed to suffer from the painful postures and injuries in their workplace. Musculoskeletal disorders (MSDs) is the most common problem frequently reported by the workers. This problem occurs due to the lack of knowledge and alertness from the workers to the ergonomic in their surroundings. This paper intends to review the approaches and instruments used by the previous works of the researchers in the evaluation of the ergonomics. The two main assessment methods often used for ergonomic evaluation are Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). Popular devices are Inertial Measurement Units (IMU) and Microsoft Kinect.

A trend analysis of ergonomic research themes in Taiwan.

Science.gov (United States)

Lin, Chih-Long

2015-01-01

This paper examines the development of ergonomics in Taiwan by analysing 1404 scientific articles published by 113 permanent members of the Ergonomics Society of Taiwan (EST). Each article was classified by key words and abstract content. Each article was also coded by period of publication (1971-1992 (first period), 1993-1997 (second period), 1998-2002 (third period), 2003-2007 (fourth period), and 2008-2012 (fifth period), and against 13 topic categories. The results show that rate of publication has increased by approximately 100 articles every five years since 1993.The most popular topic was ergonomics assessment and analysis techniques in the first period, force exertion-related research in the second period, product design and evaluation in the third period, occupational safety and health in the fourth period and human-computer interface in the fifth period. Each of these is highly relevant to current contemporary issues around the world. Finally, potential areas for future ergonomics research in Taiwan are discussed. This study investigates the trends in academic papers published by members of the EST. Over time, topics have shifted from ergonomics evaluation methods to occupational safety and health, and human–computer interaction. The findings should be considered as important references for planning the future of ergonomics in Taiwan.

Self-assessment of ergonomics amongst dental students utilising photography: RCT.

Science.gov (United States)

Partido, B B; Wright, B M

2018-03-02

Dental professionals are at high risk of musculoskeletal disorders (MSDs) due to static working positions for extended periods of time. Musculoskeletal pain has been identified as early as during their entry-level dental education. The purpose of this study was to determine whether feedback involving photography and self-assessment would improve ergonomic scores and the accuracy of ergonomic self-assessments amongst dental students. The study involved a randomised control design of 135 dental students. At weeks 1 and 4, participants were photographed, and at weeks 1 through 4, participants completed ergonomic self-evaluations, using a Modified-Dental Operator Posture Assessment Instrument (M-DOPAI). During weeks 2 and 3, participants in the training group were photographed and used those photographs to complete ergonomic self-assessments. All participants' pre-training and post-training photographs were evaluated for ergonomic scores by two raters. A mixed-design ANOVA of ergonomic scores revealed that ergonomic scores improved for all students who received the ergonomics training (F(1,254)=17.41, P < .001). In addition, a mixed-design ANOVA of kappa coefficient values between student and rater scores revealed that the accuracy of self-assessments improved for all students who received the ergonomics training (F(1,127)=6.33, P < .05). The use of photographs and self-assessment provides dental and dental hygiene educators with a pragmatic method to improve self-assessment skills, increase student awareness of any postural deviations from ideal and improve musculoskeletal health. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Evaluation of lumbar overload in hotel maids.

Science.gov (United States)

Silva, J S; Correa, L R C; Morrone, L C

2012-01-01

Work-related musculoskeletal disorders are responsible for important amount of declining productivity among workers. Its economic impact is considered important because, in some aspects, such as sickness absence, it can cause increase in costs for employers. This paper aimed at identifying whether the activities that the hotel maids perform during working hours may lead to the development of musculoskeletal disorders. Cross-sectional study conducted in a hotel in the city of São Paulo, Brazil. Performed an ergonomic analysis of the job application with a checklist consisting of risk assessment of low back pain. The maids are responsible for the cleaning of hotel rooms, including to lean in order to clean the bathroom. The activity is associated with ergonomic risk for poor posture, manual transport of loads and use of physical force in the upper limbs. This job presents a moderate risk of low back pain according to checklist for assessing the ergonomic situation. Negative ergonomic aspects are associated with the development or aggravation of musculoskeletal disorders in these workers. We suggest modification in work organisation. Another possibility is decreased the weight of the carts, keeping areas of replacement material on each floor.

Ergonomics evaluation as a powerful tool to redesign advanced interfaces of nuclear control rooms

International Nuclear Information System (INIS)

Santos, Isaac J.A.L. dos; Carvalho, Paulo V.R.; Oliveira, Mauro V.; Fernandes, Nelson; Oliveira, Helio C.L.; Grecco, Claudio H.S.; Mol, Antonio C.A.; Augusto, Silas C.; Teixeira, Douglas V.; Ferraz, Fernando T.

2007-01-01

Ergonomics is the scientific discipline concerned with the understanding of interactions among humans and other elements of a system. Ergonomics contributes to the design and evaluation of tasks, jobs, products, environments and systems in order to make them compatible with the needs, abilities and limitations of people. In the safe operation of nuclear power plant the performance of the control room crews plays an important role. In this respect, well-designed human-system interfaces (HSI) are crucial for safe and efficient operation of the plant, reducing the occurrence of incidents, accidents and the risks for human error. The aim of this paper is to describe a case study in which a methodological framework was applied to redesign advanced interfaces of a nuclear simulator. (author)

Evaluation and development of an ergonomic complement to the Value Stream Mapping tool

DEFF Research Database (Denmark)

Edwards, Kasper

2009-01-01

, ergonomic analysis and non-technical dimensions, i.e. the social side of the process. In an international perspective the Nordic countries are presumed to offer the best location for studies on how to integrate work environment issues into process development for improved performance. Our unique roots...... and increasing ergonomic strain leading to more sick days and early retirement. In order to improve sustainability of suggested system solutions resulting from VSM a complementary tool, Ergonova, is now developed. The present planned Nordic investigation aims to evaluate and further develop the Ergonova tool...... for practical use in the Nordic countries. I t is hypothesized that a broader spectrum of suggested solutions will be obtained by using Ergonova and some of these may appear to offer a higher level of sustainability. The overall research design is a comparative study where both the Ergonova and VSM tools...

Checklist for clinical readiness published

Science.gov (United States)

Scientists from NCI, together with collaborators from outside academic centers, have developed a checklist of criteria to evaluate the readiness of complex molecular tests that will guide decisions made during clinical trials. The checklist focuses on tes

Ergonomics policy in Indonesia.

Science.gov (United States)

Sutarjo, Untung S

2007-12-01

Workers' conditions in accordance with their place of work are different from one area to another, especially in this reformation era where there are immense alterations in politics shown from the centralized government shifting to decentralization and district autonomy. Ergonomics problems in Indonesia are reviewed. In home industries, workers have to adjust themselves to their jobs, and ergonomic improvement may face significant impediments especially in small-scale industries. It is necessary to create or identify the most plausible model to be implemented in accordance with the conditions of districts, including low awareness about the relation between ergonomics and workers' productivity in producing goods and services and working processes scattered often at their own houses. As conditions conducive to ergonomics programs, district-level willingness to improve and increase the wealth of their society, recognition by businesses about the impacts of ergonomics on productivity and reduction of medical treatment costs may be mentioned. Labor unions support ergonomic improvements at production processes, and professionals and academicians are ready to assist, whereas national banks and foreign investment may encourage new technologies including ergonomics aspects. It is important to strengthen ergonomic improvement efforts in Indonesia through establishing district ergonomics improvement networks and ergonomics peer leaders with the support of continual training starting from the training of core leaders at the province level and extending to peer leaders at district level. This training should be made as simple as possible in order to facilitate innovations toward changes. Finally assistance is needed by the mentor teams in order to periodically monitor the improvements undertaken.

Ergonomic Product Design 21

International Nuclear Information System (INIS)

Kwon, Yeong Guk

1996-09-01

This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

Corporate ergonomics programme at Ford Motor Company.

Science.gov (United States)

Joseph, Bradley S

2003-01-01

The use of ergonomic principles in automobile assembly and manufacturing operations has become an important part of a comprehensive health and safety process as well as an integral part of the engineering systems. Ford Motor Company has developed an ergonomics process to manage issues related to injury and illness (e.g., musculoskeletal diseases) and to ensure the appropriate use of human resources on the plant floor. The ergonomics programme uses joint labour and management teams to identify and evaluate jobs and develop and implement solutions. This paper summarises the efforts of the Ford Motor Company in implementing and maintaining the programme. Key strategies are outlined that provide important links to internal organisational units that are critical to fully utilise the ergonomics process. In addition, the paper outlines differences between proactive and reactive efforts and shows the importance of using the information generated by the initiatives for process improvement.

Design Processes and Constructive Ergonomics

DEFF Research Database (Denmark)

Broberg, Ole

2015-01-01

This paper discusses some central issues in the concept of constructive ergonomics. It does so by reflecting on experiences from ergonomics intervention projects carried out in Denmark. Constructive ergonomics has a huge potential as a new way to go for ergonomics research and practice. However, ...

Meeting diversity in ergonomics

NARCIS (Netherlands)

Pikaar, R.N.; Koningsveld, E.A.P.; Settels, P.J.M.

2007-01-01

Key Features: Offers the conceptual tools for creating more adaptable ergonomic designs to meet the needs of diverse human populations, Unlock the strategic business value found in ergonomically safe and comfortable products, Learn from in-depth case studies how ergonomic intervention was

Design Processes and Constructive Ergonomics

OpenAIRE

Broberg, Ole

2015-01-01

This paper discusses some central issues in the concept of constructive ergonomics. It does so by reflecting on experiences from ergonomics intervention projects carried out in Denmark. Constructive ergonomics has a huge potential as a new way to go for ergonomics research and practice. However, many challenges are to be overcome. They relate among others to education and training of ergonomist, and the cultural and institutional setting of ergonomics in specific countries.

State of Science: ergonomics and global issues.

Science.gov (United States)

Thatcher, Andrew; Waterson, Patrick; Todd, Andrew; Moray, Neville

2018-02-01

In his 1993 IEA keynote address, Neville Moray urged the ergonomics discipline to face up to the global problems facing humanity and consider how ergonomics might help find some of the solutions. In this State of Science article we critically evaluate what the ergonomics discipline has achieved in the last two and a half decades to help create a secure future for humanity. Moray's challenges for ergonomics included deriving a value structure that moves us beyond a Westernised view of worker-organisation-technology fit, taking a multidisciplinary approach which engages with other social and biological sciences, considering the gross cross-cultural factors that determine how different societies function, paying more attention to mindful consumption, and embracing the complexity of our interconnected world. This article takes a socio-historical approach by considering the factors that influence what has been achieved since Moray's keynote address. We conclude with our own set of predictions for the future and priorities for addressing the challenges that we are likely to face. Practitioner Summary: We critically reflect on what has been achieved by the ergonomics profession in addressing the global challenges raised by Moray's 1993 keynote address to the International Ergonomics Association. Apart from healthcare, the response has largely been weak and disorganised. We make suggestions for priority research and practice that is required to facilitate a sustainable future for humanity.

Surgical checklists: the human factor.

LENUS (Irish Health Repository)

O Connor, Paul

2013-05-14

BACKGROUND: Surgical checklists has been shown to improve patient safety and teamwork in the operating theatre. However, despite the known benefits of the use of checklists in surgery, in some cases the practical implementation has been found to be less than universal. A questionnaire methodology was used to quantitatively evaluate the attitudes of theatre staff towards a modified version of the World Health Organisation (WHO) surgical checklist with relation to: beliefs about levels of compliance and support, impact on patient safety and teamwork, and barriers to the use of the checklist. METHODS: Using the theory of planned behaviour as a framework, 14 semi-structured interviews were conducted with theatre personnel regarding their attitudes towards, and levels of compliance with, a checklist. Based upon the interviews, a 27-item questionnaire was developed and distribute to all theatre personnel in an Irish hospital. RESULTS: Responses were obtained from 107 theatre staff (42.6% response rate). Particularly for nurses, the overall attitudes towards the effect of the checklist on safety and teamworking were positive. However, there was a lack of rigour with which the checklist was being applied. Nurses were significantly more sensitive to the barriers to the use of the checklist than anaesthetists or surgeons. Moreover, anaesthetists were not as positively disposed to the surgical checklist as surgeons and nurse. This finding was attributed to the tendency for the checklist to be completed during a period of high workload for the anaesthetists, resulting in a lack of engagement with the process. CONCLUSION: In order to improve the rigour with which the surgical checklist is applied, there is a need for: the involvement of all members of the theatre team in the checklist process, demonstrated support for the checklist from senior personnel, on-going education and training, and barriers to the implementation of the checklist to be addressed.

Indonesia ergonomics roadmap: where we are going?

Science.gov (United States)

Wignjosoebroto, Sritomo

2007-12-01

There are so many definitions for ergonomics terms such as human factors, human factors engineering, human engineering, human factors psychology, engineering psychology, applied ergonomics, occupational ergonomics, industrial ergonomics and industrial engineering. The most inclusive terms are ergonomics and human factors. Both represent the study of work and the interaction between people and their work environmental systems. The main objective is especially fitting with the need to design, develop, implement and evaluate human-machine and environment systems that are productive, comfortable, safe and satisfying to use. The work of the ergonomists in Indonesia--most of them are academicians--have one thing in common, i.e. with the appropriate type of ergonomic approaches to interventions; there would be improvements in productivity, quality of working conditions, occupational safety and health (OSH), costs reduction, better environment, and increase in profits. So many researches, training, seminars and socialization about ergonomics and OSH have been done concerning micro-to-macro themes; but it seems that we are practically still running at the same place up to now. In facts, workers are still working using their traditional or obsolete methods in poor working conditions. Accidents are still happening inside and outside industry with the main root-cause being human "unsafe behavior" and errors. Industrial products cannot compete in the global market, and so many manufacturing industries collapsed or relocated to foreign countries. This paper discusses such a roadmap and review what we ergonomists in Indonesia have done and where we are going to? This review will be treated in the field of ergonomics and OSH to take care the future Indonesia challenges. Some of the challenges faced are care for the workers, care for the people, care for the quality and productivity of work, care for the new advanced technologies, care for the environment, and last but not least

Ergonomic design and evaluation of the handle for an endoscopic dissector.

Science.gov (United States)

Shimomura, Yoshihiro; Minowa, Keita; Kawahira, Hiroshi; Katsuura, Tetsuo

2016-05-01

The purpose of this study was to design an endoscopic dissector handle and objectively assess its usability. The handles were designed with increased contact area between the fingers and thumb and the eye rings, and the eye rings were modified to have a more perpendicular insertion angle to the finger midline. Four different handle models were compared, including a conventional product. Subjects performed dissection, exclusion, grasping, precision manipulation and precision handling tasks. Electromyography and subjective evaluations were measured. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability. The activity of the first dorsal interosseous muscle was sometimes influenced by the shape of the other parts. The ergonomically designed endoscopic dissector handle used in this study achieved high usability. Medical instrument designs based on ergonomic concepts should be assessed with objective indices. Practitioner Summary: The endoscopic dissector handles were designed with increased contact area and more suitable insertion angle between the fingers and thumb and the eye rings. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability.

Ergonomic evaluation of cheese production process in dairy industries

Directory of Open Access Journals (Sweden)

Luciano Brito Rodrigues

2008-07-01

Full Text Available The present work consisted of an analysis of work conditions aspects in small dairy industries from southwest region of Bahia state. The study considered the analysis of environmental variables and the organization of the work in the production process of cheeses. The analysis was performed by means of observations in loco and measurement of the environmental variables related to noise, illumination and temperature. The main problems are related to posture and inadequate illumination. The parameters were evaluated according to the norms and legislation available in order to propose suggestions for the identified problems, objectifying the comfort and safety of workers and the consequent improvement of activities developed in these industries. Keywords: Ergonomics, Dairy industries, Environmental comfort.

Participatory ergonomics and new work: reducing neck complaints in assembling

NARCIS (Netherlands)

Migueza, S.A.; Hallbeck, M.S.; Vink, P.

2012-01-01

A participatory ergonomics approach is used to create a new work environment, which is aimed at reducing neck complaints in a cell phone assembly. The participatory ergonomics program included an initiative, problem identification, a selection of solutions, an implementation and evaluation.

A cluster randomized trial for the implementation of an antibiotic checklist based on validated quality indicators: the AB-checklist.

Science.gov (United States)

van Daalen, Frederike V; Prins, Jan M; Opmeer, Brent C; Boermeester, Marja A; Visser, Caroline E; van Hest, Reinier M; Hulscher, Marlies E J L; Geerlings, Suzanne E

2015-03-19

Recently we developed and validated generic quality indicators that define 'appropriate antibiotic use' in hospitalized adults treated for a (suspected) bacterial infection. Previous studies have shown that with appropriate antibiotic use a reduction of 13% of length of hospital stay can be achieved. Our main objective in this project is to provide hospitals with an antibiotic checklist based on these quality indicators, and to evaluate the introduction of this checklist in terms of (cost-) effectiveness. The checklist applies to hospitalized adults with a suspected bacterial infection for whom antibiotic therapy is initiated, at first via the intravenous route. A stepped wedge study design will be used, comparing outcomes before and after introduction of the checklist in nine hospitals in the Netherlands. At least 810 patients will be included in both the control and the intervention group. The primary endpoint is length of hospital stay. Secondary endpoints are appropriate antibiotic use measured by the quality indicators, admission to and duration of intensive care unit stay, readmission within 30 days, mortality, total antibiotic use, and costs associated with implementation and hospital stay. Differences in numerical endpoints between the two periods will be evaluated with mixed linear models; for dichotomous outcomes generalized estimating equation models will be used. A process evaluation will be performed to evaluate the professionals' compliance with use of the checklist. The key question for the economic evaluation is whether the benefits of the checklist, which include reduced antibiotic use, reduced length of stay and associated costs, justify the costs associated with implementation activities as well as daily use of the checklist. If (cost-) effective, the AB-checklist will provide physicians with a tool to support appropriate antibiotic use in adult hospitalized patients who start with intravenous antibiotics. Dutch trial registry: NTR4872.

Evaluating Checklist Use in Companion Animal Wellness Visits in a Veterinary Teaching Hospital: A Preliminary Study.

Science.gov (United States)

Nappier, Michael T; Corrigan, Virginia K; Bartl-Wilson, Lara E; Freeman, Mark; Werre, Stephen; Tempel, Eric

2017-01-01

The number of companion animal wellness visits in private practice has been decreasing, and one important factor cited is the lack of effective communication between veterinarians and pet owners regarding the importance of preventive care. Checklists have been widely used in many fields and are especially useful in areas where a complex task must be completed with multiple small steps, or when cognitive fatigue is evident. The use of checklists in veterinary medical education has not yet been thoroughly evaluated as a potential strategy to improve communication with pet owners regarding preventive care. The authors explored whether the use of a checklist based on the American Animal Hospital Association/American Veterinary Medical Association canine and feline preventive care guidelines would benefit senior veterinary students in accomplishing more complete canine and feline wellness visits. A group of students using provided checklists was compared to a control group of students who did not use checklists on the basis of their medical record notes from the visits. The students using the checklists were routinely more complete in several areas of a wellness visit vs. those who did not use the checklists. However, neither group of students routinely discussed follow-up care recommendations such as frequency or timing of follow-up visits. The study authors recommend considering checklist use for teaching and implementing wellness in companion animal primary care veterinary clinical teaching settings.

[Functions of participatory ergonomics programs in reducing work-related musculoskeletal disorders].

Science.gov (United States)

Guo, M J; Liu, J J; Yao, H Y

2016-08-10

Work-related musculoskeletal disorders (MSDs) are most commonly seen in all the occupational non-fatal injuries and illnesses for workers, especially those who are involved in labor-intensive industries. Participatory ergonomics is frequently used to prevent musculoskeletal disorders. This paper gives an overview of a historical perspective on the use of participatory ergonomics approach in reducing the health effects of labor-intensive industries. Progress, barriers and facilitators on the organization, implementation and evaluation of participatory ergonomics programs are studied. Participatory ergonomics seems a successful method to develop, prioritize measures to prevent MSDs. Participatory ergonomics can help industries reduce musculoskeletal injuries and disorders, improve workplace condition and promote health conditions of the workers.

The economic evaluation of an antibiotic checklist as antimicrobial stewardship intervention

NARCIS (Netherlands)

Daalen, F.V. van; Opmeer, B.C.; Prins, J.M.; Geerlings, S.E.; Hulscher, M.E.J.L.

2017-01-01

Objectives: An antibiotic checklist was introduced in nine Dutch hospitals to improve appropriate antibiotic use. We estimated the cost-effectiveness of checklist use. Methods: We compared 853 patients treated with an antibiotic before checklist introduction (usual care group) with 1207 patients

SME Worker Affective (SWA) index based on environmental ergonomics

Science.gov (United States)

Ushada, M.; Kusuma Aji, G.; Okayama, T.; Khidir, M.

2018-04-01

Small-Medium sized (SME) is a focal type of Indonesian industry which contributes to national emerging economies. Indonesian goverment has developed employee social security system (BPJS Ketenagakerjaan) to support worker quality of life. However, there were limited research which could assist BPJS Ketenagakerjaan in evaluating worker quality of life. Worker quality of life could be categorized as the highest worker needs or affective states. SME Worker Affective (SWA) index is being concerned as a basic tool to make balance between worker performance and quality of life in workstation of SMEs. The research objectives are: 1) To optimize the environmental ergonomics in SMEs; 2) To quantify SME Worker Affective (SWA) index based on optimized environmental ergonomics. The research advantage is to support Indonesian goverment in monitoring SMEs good practices to its worker quality of life. Simulated annealing optimized the heart rate and environmental ergonomics parameters. SWA index was determined based on comparison between optimized heart rate and environmental ergonomics parameters. SWA index were quantified for 380 data of worker. The evaluation indicated 51.3% worker in affective and 48.7% in non-affective condition. Research results indicated that stakeholders of SMEs should put more attention on environmental ergonomics and worker affective.

An economic evaluation of a participatory ergonomics process in an auto parts manufacturer.

Science.gov (United States)

Tompa, Emile; Dolinschi, Roman; Laing, Andrew

2009-01-01

We assess the costs and consequences of a participatory ergonomics process at a Canadian car parts manufacturer from the perspective of the firm. Regression modeling was used with interrupted time series data to assess the impact of the process on several health measures. Consequences were kept in natural units for cost-effectiveness analysis, and translated into monetary units for cost-benefit analysis. The duration of disability insurance claims and the number of denied workers' compensation claims was significantly reduced. The cost-effectiveness ratio is $12.06 per disability day averted. The net present value is $244,416 for a 23-month period with a benefit-to-cost ratio of 10.6, suggesting that the process was worth undertaking (monetary units in 2001 Canadian dollars). Our findings emphasize the importance of considering a range of outcomes when evaluating an occupational health and safety intervention. Participatory ergonomics process can be cost-effective for a firm.

Ergonomics

CSIR Research Space (South Africa)

Schutte, PC

2007-01-01

Full Text Available whether trends exist across jobs that use similar equipment, tools or processes. 23.4.4 Limitations An effective ergonomics hazard identification and risk assessment process should facilitate the classification of possible high risk jobs in a mining... to review the data available, which identify a shop or workplace as a potential ergonomics problem area. It is also useful to become familiar with the processes and job activities that are performed in each work area. Step 2: Conduct a workplace/ work...

Evaluating Checklist Use in Companion Animal Wellness Visits in a Veterinary Teaching Hospital: A Preliminary Study

Directory of Open Access Journals (Sweden)

Michael T. Nappier

2017-06-01

Full Text Available The number of companion animal wellness visits in private practice has been decreasing, and one important factor cited is the lack of effective communication between veterinarians and pet owners regarding the importance of preventive care. Checklists have been widely used in many fields and are especially useful in areas where a complex task must be completed with multiple small steps, or when cognitive fatigue is evident. The use of checklists in veterinary medical education has not yet been thoroughly evaluated as a potential strategy to improve communication with pet owners regarding preventive care. The authors explored whether the use of a checklist based on the American Animal Hospital Association/American Veterinary Medical Association canine and feline preventive care guidelines would benefit senior veterinary students in accomplishing more complete canine and feline wellness visits. A group of students using provided checklists was compared to a control group of students who did not use checklists on the basis of their medical record notes from the visits. The students using the checklists were routinely more complete in several areas of a wellness visit vs. those who did not use the checklists. However, neither group of students routinely discussed follow-up care recommendations such as frequency or timing of follow-up visits. The study authors recommend considering checklist use for teaching and implementing wellness in companion animal primary care veterinary clinical teaching settings.

WHO Safety Surgical Checklist implementation evaluation in public hospitals in the Brazilian Federal District

Directory of Open Access Journals (Sweden)

Heiko T. Santana

2016-09-01

Full Text Available Summary: The World Health Organization (WHO created the WHO Surgical Safety Checklist to prevent adverse events in operating rooms. The aim of this study was to analyze WHO checklist implementation in three operating rooms of public hospitals in the Brazilian Federal District. A prospective cross-sectional study was performed with pre- (Period I and post (Period II-checklist intervention evaluations. A total of 1141 patients and 1052 patients were studied in Periods I and II for a total of 2193 patients. Period I took place from December 2012 to March 2013, and Period II took place from April 2013 to August 2014. Regarding the pre-operatory items, most surgeries were classified as clean-contaminated in both phases, and team attire improved from 19.2% to 71.0% in Period II. Regarding checklist adherence in Period II, “Patient identification” significantly improved in the stage “Before induction of anesthesia”. “Allergy verification”, “Airway obstruction verification”, and “Risk of blood loss assessment” had low adherence in all three hospitals. The items in the stage “Before surgical incision” showed greater than 90.0% adherence with the exception of “Anticipated critical events: Anesthesia team review” (86.7% and “Essential imaging display” (80.0%. Low adherence was noted in “Instrument counts” and “Equipment problems” in the stage “Before patient leaves operating room”. Complications and deaths were low in both periods. Despite the variability in checklist item compliance in the surveyed hospitals, WHO checklist implementation as an intervention tool showed good adherence to the majority of the items on the list. Nevertheless, motivation to use the instrument by the surgical team with the intent of improving surgical patient safety continues to be crucial. Keywords: Surgical checklist, Adverse events, Patient safety, Surgical team, Infection control

Sound in Ergonomics

Directory of Open Access Journals (Sweden)

Jebreil Seraji

1999-03-01

Full Text Available The word of “Ergonomics “is composed of two separate parts: “Ergo” and” Nomos” and means the Human Factors Engineering. Indeed, Ergonomics (or human factors is the scientific discipline concerned with the understanding of interactions among humans and other elements of a system, and the profession that applies theory, principles, data and methods to design in order to optimize human well-being and overall system performance. It has applied different sciences such as Anatomy and physiology, anthropometry, engineering, psychology, biophysics and biochemistry from different ergonomics purposes. Sound when is referred as noise pollution can affect such balance in human life. The industrial noise caused by factories, traffic jam, media, and modern human activity can affect the health of the society.Here we are aimed at discussing sound from an ergonomic point of view.

Reducing musculoskeletal discomfort: effects of an office ergonomics workplace and training intervention.

Science.gov (United States)

Robertson, Michelle M; O'Neill, Michael J

2003-01-01

Effects of an office ergonomics workplace and training intervention on workers' knowledge and self-reported musculoskeletal pain and discomfort were investigated. An instructional systems design process was used to develop an office ergonomics training program and the evaluation tools used to measure the effectiveness of the training program on workers' office ergonomics knowledge and skills. It was hypothesized that the training and workplace intervention would allow the worker to more effectively use their workplace through increased office ergonomics knowledge and skills. Following the intervention, there was a significant increase in workers' office ergonomics knowledge and awareness. Self-reported work-related musculoskeletal disorders significantly decreased for the group who had a workplace change and received ergonomic training relative to a workplace change-only group and a no intervention control group.

Assessment of competency for execution: professional guidelines and an evaluation checklist.

Science.gov (United States)

Zapf, Patricia A; Boccaccini, Marcus T; Brodsky, Stanley L

2003-01-01

The issue of whether mental health professionals should be involved in conducting evaluations of competency for execution is a topic that has elicited controversy and heated debate. This article picks up at a point beyond the controversy and addresses issues of professionalism and the objective assessment of competency for execution. Specifically, this article identifies professional standards for conducting competence for execution (CFE) evaluations, describes current practices in this area, and provides an interview checklist that can be used as an evaluation guide by involved professionals. Copyright 2002 John Wiley & Sons, Ltd.

SUCCESS FRAMEWORK FOR TEACHING ERGONOMICS TO ENGINEERING STUDENTS

Directory of Open Access Journals (Sweden)

MUSHTAK AL-ATABI

2013-04-01

Full Text Available Taylor's University School of Engineering (Malaysia is a project-based-learning school that puts a conscious effort to educate engineers on the importance of applying ergonomic principles at the conceiving and designing stages of a product life cycle. This paper reports on an innovative approach to teaching ergonomics using the SUCCESS framework (Simple, Unexpected, Credible, Concrete, Emotions, Story, and Simulation. This teaching technique was adopted to engage the hearts and minds of the students and get them to embrace ergonomics as an important skill for engineers. Comparing students’ module evaluation and feedback, both before and after the adoption of the SUCCESS framework showed that students enjoyed the new approach of teaching and found it more fulfilling.

Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome.

Science.gov (United States)

Andersen, Simone Nyholm; Broberg, Ole

2015-11-01

Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups' high fidelity of room layout and affordance of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models' high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity organization. Furthermore, the study addresses the form of the identified and evaluated conditions, being either identified challenges or tangible design criteria. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Human Factors And Ergonomics In The Planning Of Production

DEFF Research Database (Denmark)

Jensen, Per Langå

2002-01-01

For year’s integration of ergonomics into the planning of new production processes has been an ideal for regulating agencies supported by ergonomic experts. But the ideal appears to be difficult to live up to. A development of tools both by agencies and by groups of researchers has been seen...... of organizational conditions for giving ergonomics a stronger position in the firm. Ergonomists have to tackle these issues, but it implies a new understanding of their roles, which goes beyond the traditional discussion of expert versus facilitator. The paper is based on an evaluation of a Swedish research......-programme of a new approach to intervention studies on musculosceletaldiseases, on a major Danish research programme on integrating ergonomics (working environment) into the planning activities of the enterprises and on discussions with the staff of the Danish mandatory occupational health and safety services...

Building a framework for ergonomic research on laparoscopic instrument handles.

Science.gov (United States)

Li, Zheng; Wang, Guohui; Tan, Juan; Sun, Xulong; Lin, Hao; Zhu, Shaihong

2016-06-01

Laparoscopic surgery carries the advantage of minimal invasiveness, but ergonomic design of the instruments used has progressed slowly. Previous studies have demonstrated that the handle of laparoscopic instruments is vital for both surgical performance and surgeon's health. This review provides an overview of the sub-discipline of handle ergonomics, including an evaluation framework, objective and subjective assessment systems, data collection and statistical analyses. Furthermore, a framework for ergonomic research on laparoscopic instrument handles is proposed to standardize work on instrument design. Copyright © 2016 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

ERGONOMICS safety course

CERN Multimedia

SC Unit

2008-01-01

Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! •\tErgonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 •\tErgonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will receive an invitation via e-mail once your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

ERGONOMICS safety course

CERN Multimedia

SC Unit

2008-01-01

Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! Ergonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 Ergonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will receive and invitation via e-mail once your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

ERGONOMICS safety course

CERN Multimedia

SC Unit

2008-01-01

Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! Ergonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 Ergonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will be invited by email after your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

Strategic Management and Innovation: A Checklist for Readiness Evaluation of AACSB Standards

Science.gov (United States)

Kundu, Goutam Kumar; Bairi, Jayachandra

2016-01-01

Purpose: The purpose of this paper is to introduce the concept of a checklist, focusing on the detailed analysis of the requirement of the Association to Advance Collegiate Schools of Business (AACSB) standards related to strategic management and innovation area, for evaluation of implementation readiness in a business school setting.…

Occupational ergonomics and injury prevention.

Science.gov (United States)

Stobbe, T J

1996-01-01

Ergonomics is the study of people at work. The current focus is on the prevention of work-induced musculoskeletal injuries through the application of sound ergonomic principles. This chapter has briefly outlined ergonomics and its history, has described low back pain and upper extremity cumulative trauma disorders from an ergonomic perspective, and has discussed control and prevention approaches for a few scenarios. Ergonomic principles are based on a combination of science and engineering and a thorough understanding of human capabilities and limitations. When these principles are applied to the design of a job, task, process, or procedure, the incidence and severity of musculoskeletal injuries decrease. In many cases productivity and morale also improve. Workers are spared suffering, and employers are spared costs. It is hoped that this discussion will encourage more health, safety, and business professionals to learn about and apply ergonomics in their workplaces for the improvement of the worker, product, and business. Finally, many additional epidemiologic studies on the individual and joint effects of the CTD risk factors are needed. The knowledge gained from these studies will promote the more effective application of ergonomic principles to reduce worker suffering, improve products, and reduce costs.

Health Care Ergonomics: Contributions of Thomas Waters.

Science.gov (United States)

Poole Wilson, Tiffany; Davis, Kermit G

2016-08-01

The aim of this study was to assess the contributions of Thomas Waters's work in the field of health care ergonomics and beyond. Waters's research of safe patient handling with a focus on reducing musculoskeletal disorders (MSDs) in health care workers contributed to current studies and prevention strategies. He worked with several groups to share his research and assist in developing safe patient handling guidelines and curriculum for nursing students and health care workers. The citations of articles that were published by Waters in health care ergonomics were evaluated for quality and themes of conclusions. Quality was assessed using the Mixed Methods Appraisal Tool and centrality to original research rating. Themes were documented by the type of population the citing articles were investigating. In total, 266 articles that referenced the top seven cited articles were evaluated. More than 95% of them were rated either medium or high quality. The important themes of these citing articles were as follows: (a) Safe patient handling is effective in reducing MSDs in health care workers. (b) Shift work has negative impact on nurses. (c) There is no safe way to manually lift a patient. (d) Nurse curriculums should contain safe patient handling. The research of Waters has contributed significantly to the health care ergonomics and beyond. His work, in combination with other pioneers in the field, has generated multiple initiatives, such as a standard safe patient-handling curriculum and safe patient-handling programs. © 2016, Human Factors and Ergonomics Society.

The FITS model office ergonomics program: a model for best practice.

Science.gov (United States)

Chim, Justine M Y

2014-01-01

An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

Ergonomic solutions to support forced static positions at work

Directory of Open Access Journals (Sweden)

Suszyński Marcin

2017-01-01

Full Text Available The article analyzes the available ergonomic constructions used for the support of the musculoskeletal system during static, prolonged work performed in forced positions. Possible evaluation methods are presented as well as ergonomic considerations of work performed in inclined positions, where there is no possibility of influencing the working plane. As a result of the presented work, a set of criteria has been proposed and the requirements for methods which can be used to evaluate the technical constructions supporting the worker during tasks performed in forced and static positions.

A review and exploration of sociotechnical ergonomics.

Science.gov (United States)

Dirkse van Schalkwyk, Riaan; Steenkamp, Rigard J

2017-09-01

A holistic review of ergonomic history shows that science remains important for general occupational health and safety (OSH), the broad society, culture, politics and the design of everyday things. Science provides an unconventional and multifaceted viewpoint exploring ergonomics from a social, corporate and OSH perspective. Ergonomic solutions from this mindset may redefine the science, and it will change with companies that change within this socially hyper-connected world. Authentic corporate social responsibility will counter 'misleadership' by not approaching ergonomics with an afterthought. The review concludes that ergonomics will be stronger with social respect and ergonomic thinking based on the optimisation of anthropometric data, digital human models, computer-aided tools, self-empowerment, job enrichment, work enlargement, physiology, industrial psychology, cybernetic ergonomics, operations design, ergonomic-friendly process technologies, ergonomic empowerment, behaviour-based safety, outcome-based employee wellness and fatigue risk management solutions, to mention a few.

Hands-on lessons in ergonomics for youth

Energy Technology Data Exchange (ETDEWEB)

Bennett, C; Alexandre, M; Jacobs, K

2005-09-29

toolkit that teachers can use in classrooms with minimal training. The kit will come with lesson plans, including background material, key points, questions and answers, possible homework assignments and references. It will include instructions and worksheets for students as well as the materials needed for each module. A pre- and posttest will be administered to test the awareness and understanding of the principles introduced in through the modules. This interactive session will offer the opportunity to for attendees to participate in some of the modules that have been developed to provide experiential demonstration of ergonomics principles. Attendees will experience ergonomics in action and be able to evaluate the applicability of the process in their own area in the world of ergonomics. The session will consist of 20 minutes introduction, 40 minutes working with the toolkit, finally another 30 minutes for questions or discussion for a total time of 90 minutes.

Ergonomics: case study in a university library

OpenAIRE

Daniela Capri; Eliana Maria dos Santos Bahia; Adilson Luiz Pinto

2012-01-01

This final paper aimed to analyze the real ergonomics of a university library from Florianópolis and compare it with the ergonomics perceived by the user to perform an ergonomic diagnosis. In order to meet this goal two specific goals were established such as: describe the physical and environmental aspects of the library related to the real ergonomics and verify the actual perception of users about the library. As a theoretical approach, aspects of ergonomics and environmental ergonomics wer...

A replicated field intervention study evaluating the impact of a highly adjustable chair and office ergonomics training on visual symptoms☆

Science.gov (United States)

Menéndez, Cammie Chaumont; Amick, Benjamin C.; Robertson, Michelle; Bazzani, Lianna; DeRango, Kelly; Rooney, Ted; Moore, Anne

2016-01-01

Objective Examine the effects of two office ergonomics interventions in reducing visual symptoms at a private sector worksite. Methods A quasi-experimental study design evaluated the effects of a highly adjustable chair with office ergonomics training intervention (CWT group) and the training only (TO group) compared with no intervention (CO group). Data collection occurred 2 and 1 month(s) pre-intervention and 2, 6 and 12 months post-intervention. During each data collection period, a work environment and health questionnaire (covariates) and daily health diary (outcomes) were completed. Multilevel statistical models tested hypotheses. Results Both the training only intervention (p office ergonomics training alone and coupled with a highly adjustable chair reduced visual symptoms. In replicating results from a public sector worksite at a private sector worksite the external validity of the interventions is strengthened, thus broadening its generalizability. PMID:22030069

A replicated field intervention study evaluating the impact of a highly adjustable chair and office ergonomics training on visual symptoms.

Science.gov (United States)

Menéndez, Cammie Chaumont; Amick, Benjamin C; Robertson, Michelle; Bazzani, Lianna; DeRango, Kelly; Rooney, Ted; Moore, Anne

2012-07-01

Examine the effects of two office ergonomics interventions in reducing visual symptoms at a private sector worksite. A quasi-experimental study design evaluated the effects of a highly adjustable chair with office ergonomics training intervention (CWT group) and the training only (TO group) compared with no intervention (CO group). Data collection occurred 2 and 1 month(s) pre-intervention and 2, 6 and 12 months post-intervention. During each data collection period, a work environment and health questionnaire (covariates) and daily health diary (outcomes) were completed. Multilevel statistical models tested hypotheses. Both the training only intervention (poffice ergonomics training alone and coupled with a highly adjustable chair reduced visual symptoms. In replicating results from a public sector worksite at a private sector worksite the external validity of the interventions is strengthened, thus broadening its generalizability. Published by Elsevier Ltd.

Development of an Ergonomics Checklist for Investigation of Work-Related Whole-Body Disorders in Farming - AWBA: Agricultural Whole-Body Assessment.

Science.gov (United States)

Kong, Y K; Lee, S J; Lee, K S; Kim, G R; Kim, D M

2015-10-01

Researchers have been using various ergonomic tools to study occupational musculoskeletal diseases in industrial contexts. However, in agricultural work, where the work environment is poorer and the socio-psychological stress is high due to the high labor intensities of the industry, current research efforts have been scarce, and the number of available tools is small. In our preliminary studies, which focused on a limited number of body parts and other working elements, we developed separate evaluation tools for the upper and lower extremities. The current study was conducted to develop a whole-body ergonomic assessment tool for agricultural work that integrates the existing assessment tools for lower and upper extremities developed in the preliminary studies and to verify the relevance of the integrated assessment tool. To verify the relevance of the Agricultural Whole-Body Assessment (AWBA) tool, we selected 50 different postures that occur frequently in agricultural work. Our results showed that the AWBA-determined risk levels were similar to the subjective risk levels determined by experts. In addition, as the risk level increased, the average risk level increased to a similar extent. Moreover, the differences in risk levels between the AWBA and expert assessments were mostly smaller than the differences in risk levels between other assessment tools and the expert assessments in this study. In conclusion, the AWBA tool developed in this study was demonstrated to be appropriate for use as a tool for assessing various postures commonly assumed in agricultural work. Moreover, we believe that our verification of the assessment tools will contribute to the enhancement of the quality of activities designed to prevent and control work-related musculoskeletal diseases in other industries.

Psychosocial and ergonomic survey of office and field jobs in a utility company.

Science.gov (United States)

Coelho, Denis A; Tavares, Carla S D; Lima, Tânia M; Lourenço, Miguel L

2017-08-04

The effect of different kinds of work on the psychosocial assessment of workers under the same management and organizational environment is investigated. A voluntary assessment in a utility company was carried out using the short version of the Copenhagen psychosocial questionnaire (CoPsoQ) on two occasions, 1.5 years apart. Initially, 25 office workers (11 men and 14 women) participated, while 14 of those workers (8 women and 6 men) participated in the second assessment together with 32 field workers. The sewage, water treatment and maintenance workers, totaling 32 men, also participated in a field ergonomics assessment using the Washington State Department of Labor and Industries field work ergonomic checklist. The longitudinal outlook was fairly stable, with sustained severe scores in many CoPsoQ subscales and intensification of severity of workers' control over work and esteem for men. A significantly higher esteem score resulted for field rather than office workers. Workers subjected to foul odors showed similar severity of psychosocial factors. For most psychosocial dimensions, the organizational design and management system in place, as well as the overall cultural environment in which it operates, create a much stronger and more decisive impact than job-specific factors.

Action in Ergonomics

Science.gov (United States)

Training Officer, 1975

1975-01-01

A discussion with James Crowley of British Steel Corporation on the changing face of ergonomics in practice today and yesterday examines the influence of experimental psychology on the method of study and data collection. The broadening scope of ergonomics from only safety concerns to cost effectiveness and the computer are analyzed. (Author/JB)

Implementing ergonomics in large-scale engineering design. Communicating and negotiating requirements in an organizational context

Energy Technology Data Exchange (ETDEWEB)

Wulff, Ingrid Anette

1997-12-31

This thesis investigates under what conditions ergonomic criteria are being adhered to in engineering design. Specifically, the thesis discusses (1) the ergonomic criteria implementation process, (2) designer recognition of ergonomic requirements and the organization of ergonomics, (3) issues important for the implementation of ergonomic requirements, (4) how different means for experience transfer in design and operation are evaluated by the designers, (5) how designers ensure usability of offshore work places, and (6) how project members experience and cope with the large amount of documentation in large-scale engineering. 84 refs., 11 figs., 18 tabs.

Environmental restoration program pollution prevention checklist guide for the evaluation of alternatives project phase

International Nuclear Information System (INIS)

1993-09-01

Evaluation of alternative studies determine what decontamination and decommissioning (D ampersand D) alternatives are presented to regulators for facility and site cleanup. A key consideration in this process is the waste to be generated. Minimizing the volume and toxicity of this waste will ultimately contribute to the selection of the best clean-up option. The purpose of this checklist guide is to assist the user with incorporating pollution prevention/waste minimization (PP/WM) in all Evaluation of Alternatives (EV) phase projects of the Environmental Restoration (ER) Program. This guide will assist users with documenting PP/WM activities for technology transfer and reporting requirements. Automated computer screens will be created from the checklist data to help users implement and evaluate waste reduction. Users can then establish numerical performance measures to measure progress in planning, training, self-assessments, field implementation, documentation, and technology transfer. Cost savings result as users train and assess themselves, eliminating expensive process waste assessments and audit teams

Ergonomics, education and children: a personal view.

Science.gov (United States)

Woodcock, A

2007-10-01

Educational ergonomics - the teaching of ergonomics and the design of environments where ergonomics teaching and learning might occur - has received little attention from ergonomists. This paper first describes the roots of the author's interest and research in educational ergonomics; second it provides a personal view of the opportunities and challenges posed by the two streams of educational ergonomics; and lastly it considers the implications of teaching ergonomics to children in terms of their personal development, the design of schools and the impact such initiatives might have on wider societal problems.

Content Validation and Semantic Evaluation of a Check-List Elaborated for the Prevention of Gluten Cross-Contamination in Food Services

Directory of Open Access Journals (Sweden)

Priscila Farage

2017-01-01

Full Text Available Conditions associated to the consumption of gluten have emerged as a major health care concern and the treatment consists on a lifelong gluten-free diet. Providing safe food for these individuals includes adapting to safety procedures within the food chain and preventing gluten cross-contamination in gluten-free food. However, a gluten cross-contamination prevention protocol or check-list has not yet been validated. Therefore, the aim of this study was to perform the content validation and semantic evaluation of a check-list elaborated for the prevention of gluten cross-contamination in food services. The preliminary version of the check-list was elaborated based on the Brazilian resolution for food safety Collegiate Board Resolution 216 (RDC 216 and Collegiate Board Resolution 275 (RDC 275, the standard 22000 from the International Organization for Standardization (ISO 22000 and the Canadian Celiac Association Gluten-Free Certification Program documents. Seven experts with experience in the area participated in the check-list validation and semantic evaluation. The criteria used for the approval of the items, as to their importance for the prevention of gluten cross-contamination and clarity of the wording, was the achievement of a minimal of 80% of agreement between the experts (W-values ≥ 0.8. Moreover, items should have a mean ≥4 in the evaluation of importance (Likert scale from 1 to 5 and clarity (Likert scale from 0 to 5 in order to be maintained in the instrument. The final version of the check-list was composed of 84 items, divided into 12 sections. After being redesigned and re-evaluated, the items were considered important and comprehensive by the experts (both with W-values ≥ 0.89. The check-list developed was validated with respect to content and approved in the semantic evaluation.

Content Validation and Semantic Evaluation of a Check-List Elaborated for the Prevention of Gluten Cross-Contamination in Food Services.

Science.gov (United States)

Farage, Priscila; Puppin Zandonadi, Renata; Cortez Ginani, Verônica; Gandolfi, Lenora; Pratesi, Riccardo; de Medeiros Nóbrega, Yanna Karla

2017-01-06

Conditions associated to the consumption of gluten have emerged as a major health care concern and the treatment consists on a lifelong gluten-free diet. Providing safe food for these individuals includes adapting to safety procedures within the food chain and preventing gluten cross-contamination in gluten-free food. However, a gluten cross-contamination prevention protocol or check-list has not yet been validated. Therefore, the aim of this study was to perform the content validation and semantic evaluation of a check-list elaborated for the prevention of gluten cross-contamination in food services. The preliminary version of the check-list was elaborated based on the Brazilian resolution for food safety Collegiate Board Resolution 216 (RDC 216) and Collegiate Board Resolution 275 (RDC 275), the standard 22000 from the International Organization for Standardization (ISO 22000) and the Canadian Celiac Association Gluten-Free Certification Program documents. Seven experts with experience in the area participated in the check-list validation and semantic evaluation. The criteria used for the approval of the items, as to their importance for the prevention of gluten cross-contamination and clarity of the wording, was the achievement of a minimal of 80% of agreement between the experts (W-values ≥ 0.8). Moreover, items should have a mean ≥4 in the evaluation of importance (Likert scale from 1 to 5) and clarity (Likert scale from 0 to 5) in order to be maintained in the instrument. The final version of the check-list was composed of 84 items, divided into 12 sections. After being redesigned and re-evaluated, the items were considered important and comprehensive by the experts (both with W-values ≥ 0.89). The check-list developed was validated with respect to content and approved in the semantic evaluation.

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

Science.gov (United States)

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

Ergonomics: The Forgotten Variable.

Science.gov (United States)

Fitterman, L. Jeffrey

1998-01-01

Defines ergonomics and discusses design and environmental considerations. Suggests work-space requirements for: tables, chairs, monitor height, ambient noise and light, electricity, and environmental hazards. Includes sources for additional information related to ergonomic design. (AEF)

Ergonomic design in ancient Greece.

Science.gov (United States)

Marmaras, N; Poulakakis, G; Papakostopoulos, V

1999-08-01

Although the science of ergonomics did not actually emerge until the 20th century, there is evidence to suggest that ergonomic principles were in fact known and adhered to 25 centuries ago. The study reported here is a first attempt to research the ergonomics concerns of ancient Greeks, on both a conceptual and a practical level. On the former we present a collection of literature references to the concepts of usability and human-centred design. On the latter, examples of ergonomic design from a variety of fields are analysed. The fields explored here include the design of everyday utensils, the sculpture and manipulation of marble as a building material and the design of theatres. Though hardly exhaustive, these examples serve to demonstrate that the ergonomics principles, in content if not in name, actually emerged a lot earlier than is traditionally thought.

Ergonomics in a national research and development programme for food technology

DEFF Research Database (Denmark)

Broberg, Ole; Hansen, Iben Posniak

1997-01-01

The research question for the study presented in this paper was: What are the opportunities and barriers for integrating ergonomics aspects into joint projects sponsored by the FOETEK programme? The objectives were (i) to evaluate the outcome of this clause of accounting for ergonomics impacts......, and (ii) to put forward recommendations for improving the integration of ergonomics into joint projects sponsored by the FOETEK programme. A survey based on a questionnaire was conducted among 57 joint projects. A total of 217 project managers or contact persons received the questionnaire. The response...

An ergonomic evaluation of workstations in small-scale cybercafes ...

African Journals Online (AJOL)

This paper presents a survey of cybercafes in a developing country to reveal their design pitfalls and propose appropriate solutions to the observed problems based on ergonomic principles. These cybercafes provide Internet services to communities but the concern is to make the work convenient at the computer workplace ...

Participatory ergonomics simulation of hospital work systems: The influence of simulation media on simulation outcome

DEFF Research Database (Denmark)

Andersen, Simone Nyholm; Broberg, Ole

2015-01-01

of tool operation support ergonomics identification and evaluation related to the work system entities space and technologies & tools. The table-top models’ high fidelity of function relations and affordance of a helicopter view support ergonomics identification and evaluation related to the entity......Current application of work system simulation in participatory ergonomics (PE) design includes a variety of different simulation media. However, the actual influence of the media attributes on the simulation outcome has received less attention. This study investigates two simulation media: full......-scale mock-ups and table-top models. The aim is to compare, how the media attributes of fidelity and affordance influence the ergonomics identification and evaluation in PE design of hospital work systems. The results illustrate, how the full-scale mock-ups’ high fidelity of room layout and affordance...

Ergonomía y Terapia Ocupacional = Ergonomics and Occupational Therapy

Directory of Open Access Journals (Sweden)

Guzman Suárez, Olga Beatriz

2008-02-01

Full Text Available RESUMENEn éste artículo se dan a conocer algunas de las aplicaciones más importantes de la ergonomía en Terapia Ocupacional, puesto que a pesar de tener un gran reconocimiento en el sector trabajo, en donde hay un mayor predominio de estudio por parte de la ergonomía, aún se desconocen muchas de las actividades que pueden ser realizadas por éstos profesionales. Terapia Ocupacional abarca el estudio de todas las etapas de la vida del individuo, en cuanto a su desempeño ocupacional se refiere, lo cual garantiza un amplio campo de actuación profesional, que permite profundizar e investigar en diversas áreas, para que desde su experiencia y resultados se facilite el aporte a muchos proyectos de investigación que requieren de conceptos que son transversales a diferentes disciplinas y que pueden constituirse en conocimiento nuevo para la sociedad científica. Con la creación del Grupo de Salud Ocupacional y Ergonomía en la Universidad Manuela Beltrán, se pretende “Desarrollar proyectos de investigación en el campo de la ergonomía, aplicables en los contextos: laboral, escolar, social y familiar; que permitan la adaptación de diferentes entornos al ser humano y a su vez mejorar condiciones tendientes al logro de un óptimo desempeño y productividad”[1]. De esta manera, se inician proyectos de investigación con estudiantes de Terapia Ocupacional, cuyos avances han permitido escribir el presente articulo, se espera además la vinculación de otras áreas para su fortalecimiento. ABSTRACTIn this article they bring themselves to light some of the most important applications of the ergonomics in occupational therapy, since in spite of having a great recognition in the work sector, where there is a greater predominance of study on the part of the ergonomics, still many of the activities they do not know themselves that can be carried out for these professionals. The occupational therapy covers the study of all the phases of the life of

An effective model for ergonomic optimization applied to a new automotive assembly line

Energy Technology Data Exchange (ETDEWEB)

Duraccio, Vincenzo [University Niccolò Cusano, Rome Via Don Gnocchi,00166, Roma Italy (Italy); Elia, Valerio [Dept. of Innovation Engineering - University of Salento Via Monteroni, 73100, Lecce (Italy); Forcina, Antonio [University Parthenope, Dep. of Engineering Centro Direzionale - Isola C4 80143 - Naples - Italy (Italy)

2016-06-08

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

An effective model for ergonomic optimization applied to a new automotive assembly line

International Nuclear Information System (INIS)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-01-01

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

An effective model for ergonomic optimization applied to a new automotive assembly line

Science.gov (United States)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-06-01

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

A Checklist to Improve Patient Safety in Interventional Radiology

International Nuclear Information System (INIS)

Koetser, Inge C. J.; Vries, Eefje N. de; Delden, Otto M. van; Smorenburg, Susanne M.; Boermeester, Marja A.; Lienden, Krijn P. van

2013-01-01

To develop a specific RADiological Patient Safety System (RADPASS) checklist for interventional radiology and to assess the effect of this checklist on health care processes of radiological interventions. On the basis of available literature and expert opinion, a prototype checklist was developed. The checklist was adapted on the basis of observation of daily practice in a tertiary referral centre and evaluation by users. To assess the effect of RADPASS, in a series of radiological interventions, all deviations from optimal care were registered before and after implementation of the checklist. In addition, the checklist and its use were evaluated by interviewing all users. The RADPASS checklist has two parts: A (Planning and Preparation) and B (Procedure). The latter part comprises checks just before starting a procedure (B1) and checks concerning the postprocedural care immediately after completion of the procedure (B2). Two cohorts of, respectively, 94 and 101 radiological interventions were observed; the mean percentage of deviations of the optimal process per intervention decreased from 24 % before implementation to 5 % after implementation (p < 0.001). Postponements and cancellations of interventions decreased from 10 % before implementation to 0 % after implementation. Most users agreed that the checklist was user-friendly and increased patient safety awareness and efficiency. The first validated patient safety checklist for interventional radiology was developed. The use of the RADPASS checklist reduced deviations from the optimal process by three quarters and was associated with less procedure postponements.

Bad Enough Ergonomics

Directory of Open Access Journals (Sweden)

Virve Peteri

2017-01-01

Full Text Available The article analyzes ergonomics as a social and cultural phenomenon, as something that is formulated and described by speakers in a specific social context; in a company that is specialized in producing ergonomic office furniture. Through a case study of an office chair, the article examines how ergonomics and its association with the vision of the potential users and their working spaces are constructed by the relevant actors in project meetings and individual interviews during the manufacturing process. The article is concerned with how, in the process of producing an office chair, the chair gains an identity of an aesthetic design object and how this comes to mean the reformulation of the idea of ergonomics. The empirical analysis also provides insight into how the somewhat grand discourses of soft capitalism or aesthetic economy are not abstract, but very much grounded in everyday practices of an organization. The article establishes how the vision shared by all the relevant actors invites active, flexible, and cooperative end-users and how the vision also has potential material effects. The research is an ethnographically inspired case study that draws ideas from discursive psychology.

Competency checklists for strabismus surgery and retinopathy of prematurity examination.

Science.gov (United States)

McClatchey, Scott K; Lane, R Gary; Kubis, Kenneth C; Boisvert, Chantal

2012-02-01

To evaluate two checklist tools that are designed to guide, document, and assess resident training in strabismus surgery and examination of infants at risk for retinopathy of prematurity (ROP). A panel of staff surgeons from several teaching institutions evaluated the checklists and provided constructive feedback. All former residents who had been trained via the use of these checklist tools were asked to take self-assessment surveys on competency in strabismus surgery and ROP examination. A Likert 5-point scale was used for all evaluations, with 1 being the lowest rating and 5 the highest rating. Six experts in strabismus and seven in ROP rated the checklists. Their comments were used to revise the checklists, which were sent to the same group for reevaluation. The mean Likert score for the final checklists was 4.9 of 5.0 for both checklists. Of 16 former residents, 9 responded to the self-assessments with a mean overall score of 4.1 (of 5.0) for strabismus surgery and 3.9 for ROP examination. These checklist tools can be used to assess the quality of a resident's training and experience in these specific ophthalmology skills. They are complementary to other curriculum and assessment tools and can serve to organize the educational experience while ensuring a uniformity of training. Published by Mosby, Inc.

Designing for sustainability: ergonomics--carpe diem.

Science.gov (United States)

Martin, K; Legg, S; Brown, C

2013-01-01

Sustainability is a global issue that has worldwide attention but the role of ergonomics in designing for sustainability is poorly understood and seldom considered. An analysis of the literature on ergonomics, design and sustainability was conducted via a search of electronic databases: Scopus, Business Source Complete, Google Scholar, Emerald Publishing, Academic Search Premiere, Web of Science, Discover and Ergonomics Abstracts, for the years 1995-2012. A total of 1934 articles fulfilled the search criteria, but content analysis of the abstracts indicated that only 14 refereed articles addressed the main search criteria. Of those seven were in ergonomics journals and seven were in other journals (and were not written by ergonomists). It is concluded that the contribution of ergonomics to sustainability and sustainable design has been limited, even though the goals of sustainability and ergonomics are congruent. Ergonomists have not been at the forefront of research contributing to sustainability - and it is time for them to 'seize the day' - 'carpe diem'. This literature review shows that ergonomics contribution to sustainability is limited but since there is congruence between the disciplines it calls for ergonomists to become more involved and to seize the day - carpe diem.

Ergonomics in Dentistry

OpenAIRE

Dargahi H; Saraji J; Sadr J; Sadri G

2010-01-01

Background and Aims: There are several risk factors in dentistry professional environment. Carelessness about occupational health regulation endangers dentist's life. Erconomics in dentistry is a scientific approach which introduces the latest ergonomic principles in dental profession. It discusses about physical and mental stresses. Ergonomic programs eliminate dentist physical and mental challenges and provide practical solution to establish efficient and comforting environment. Materi...

Novel ergonomic postural assessment method (NERPA) using product-process computer aided engineering for ergonomic workplace design.

Science.gov (United States)

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method's usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method.

Ergonomics, Engineering, and Business: Repairing a Tricky Divorce

DEFF Research Database (Denmark)

Jensen, Per Langaa; Broberg, Ole; Møller, Niels

2009-01-01

This paper discusses how the ergonomics community can contribute to make ergonomics a strategic element in business decisions on strategy and implementation of strategy. The ergonomics community is seen as a heterogeneous entity made up of educational and research activities in universities......, ergonomists and engineers with ergonomic skills, professional ergonomics and engineering societies, and the complex of occupational health and safety regulation. This community interacts in different ways with companies and hereby influences how companies are dealing with ergonomics. The paper argues...

A new ergonomically improved lathe.

Science.gov (United States)

Harten, G A; Derks, P M

1975-09-01

Following frequent complaints of lower back pain by lathe operators, a working group from the Philips Ergonomics Department have produced a model of an ergonomically improved lathe which ensures a healthy posture for the lathe operator at work. The same healthy posture can be adopted whether the operator is sitting or standing. The operator also has a good view of his work. At least two manufacturers have undertaken to develop this ergonomic lathe.

Ergonomics and sustainability in the design of everyday use products.

Science.gov (United States)

Tosi, Francesca

2012-01-01

The relationship between Ergonomics and Design is a key element in the sustainability project, as well as in many other areas of experimental design. In the Design for Sustainability field, Ergonomics is a strategic factor for design culture innovation, providing designers with the necessary knowledge and skills regarding human characteristics and capabilities, as well as user needs and desires during use and interaction with products in work activities and everyday life. Ergonomics is also a strategic innovative factor in design development and manufacturing processes. In fact, ergonomics provides a methodological approach in user-product interaction evaluation processes through the use of participatory design and survey methods, user trials, direct observation, savings and resource conservation, etc.On the other hand, design offers solutions able to interpret user needs and expectations, at the same time suggesting new behaviors and lifestyles.In Design for Sustainability, the ergonomic and user-centered approach contributes greatly to lifestyles and innovative use of products--making it possible to understand and interpret real people needs and expectations in their everyday actions and behavior.New consumption patterns, new awareness of lifestyles, energy source consumption, purchasing methods and consumption style etc. can be supported by design innovation, responding to expressed and unexpressed user needs. With this in mind, the ergonomic approach represents the starting point for design choices and at the same time, a tool for assessing their appropriateness and effectiveness.

Pose Estimation with a Kinect for Ergonomic Studies: Evaluation of the Accuracy Using a Virtual Mannequin

Directory of Open Access Journals (Sweden)

Pierre Plantard

2015-01-01

Full Text Available Analyzing human poses with a Kinect is a promising method to evaluate potentials risks of musculoskeletal disorders at workstations. In ecological situations, complex 3D poses and constraints imposed by the environment make it difficult to obtain reliable kinematic information. Thus, being able to predict the potential accuracy of the measurement for such complex 3D poses and sensor placements is challenging in classical experimental setups. To tackle this problem, we propose a new evaluation method based on a virtual mannequin. In this study, we apply this method to the evaluation of joint positions (shoulder, elbow, and wrist, joint angles (shoulder and elbow, and the corresponding RULA (a popular ergonomics assessment grid upper-limb score for a large set of poses and sensor placements. Thanks to this evaluation method, more than 500,000 configurations have been automatically tested, which would be almost impossible to evaluate with classical protocols. The results show that the kinematic information obtained by the Kinect software is generally accurate enough to fill in ergonomic assessment grids. However inaccuracy strongly increases for some specific poses and sensor positions. Using this evaluation method enabled us to report configurations that could lead to these high inaccuracies. As a supplementary material, we provide a software tool to help designers to evaluate the expected accuracy of this sensor for a set of upper-limb configurations. Results obtained with the virtual mannequin are in accordance with those obtained from a real subject for a limited set of poses and sensor placements.

Ergonomics

Science.gov (United States)

... between you and your job conditions. Examples of ergonomic changes to your work might include Adjusting the position of your computer ... you are safe, comfortable, and less prone to work-related injuries.

Achieving LEED credit for ergonomics: Laying the foundation.

Science.gov (United States)

Lynch, Mallory

2014-01-01

Despite guidance from the United States Green Building Council (USGBC) on the requirements for earning a Leadership in Energy and Environmental Design (LEED) ergonomics credit in the Innovation in Design and Innovation in Operations category, few projects have received the credit. The University of California, Berkeley ergonomics program, Ergonomics@Work, has aligned the ergonomics strategy to those of the USGBC and LEED to achieve the ergonomics credit in several new buildings. This article describes the steps needed to obtain the credit and highlights the opportunities it creates to partner with the project team to promote ergonomics. As a profession it is up to ergonomists to create the road map that incorporates ergonomics into the green building design.

Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial.

Science.gov (United States)

Visser, Steven; van der Molen, Henk F; Sluiter, Judith K; Frings-Dresen, Monique H W

2014-04-17

More than seven out of 10 Dutch construction workers describe their work as physically demanding. Ergonomic measures can be used to reduce these physically demanding work tasks. To increase the use of ergonomic measures, employers and workers have to get used to other working methods and to maintaining them. To facilitate this behavioural change, participatory ergonomics (PE) interventions could be useful. For this study a protocol of a PE intervention is adapted in such a way that the intervention can be performed by an ergonomics consultant through face-to-face contacts or email contacts. The objective of this study is to evaluate the effectiveness of the face-to-face guidance strategy and the e-guidance strategy on the primary outcome measure: use of ergonomic measures by individual construction workers, and on the secondary outcome measures: the work ability, physical functioning and limitations due to physical problems of individual workers. The present study is a randomised intervention trial of six months in 12 companies to establish the effects of a PE intervention guided by four face-to-face contacts (N = 6) or guided by 13 email contacts (N = 6) on the primary and secondary outcome measures at baseline and after six months. Construction companies are randomly assigned to one of the guidance strategies with the help of a computer generated randomisation table. In addition, a process evaluation for both strategies will be performed to determine reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change to find possible barriers and facilitators for both strategies. A cost-benefit analysis will be performed to establish the financial consequences of both strategies. The present study is in accordance with the CONSORT statement. The outcome of this study will help to 1) evaluate the effect of both guidance strategies, and 2) find barriers to and facilitators of both guidance strategies. When these strategies are

The discipline of ergonomics in Cuba within the occupational health framework: background and trends.

Science.gov (United States)

Torres, Yaniel; Rodríguez, Yordán; Viña, Silvio

2013-01-01

The concept of ergonomics was introduced in Cuba at the beginning of the 1970s. More than 40 years later, the prevailing approach to workers' health is still generally reactive rather than proactive, despite the commitment of the government to the subject. A factor influencing this issue is, generally, lack of recognition of the benefits of establishing ergonomic principles within most occupational activities. Recent progress to move occupational health practice toward a more preventive approach has been conducted, frequently with international support. The introduction of a set of Cuban standards proposing the necessity of ergonomic evaluations is an example of this progress. The main challenge for Cuban ergonomists is to transfer knowledge to occupational health practitioners in order to be in concordance with basic standards and regulations regarding ergonomics. The article offers a short description of the history of ergonomics and an overview of ergonomics practice in Cuba.

Comparative ergonomic assessment of manual wheelchairs by paraplegic users.

Science.gov (United States)

Gil-Agudo, Angel; Solís-Mozos, Marta; del-Ama, Antonio J; Crespo-Ruiz, Beatriz; de la Peña-González, Ana Isabel; Pérez-Nombela, Soraya

2013-07-01

The aim of the present study was to describe and test the reliability of a comprehensive product-centered approach to assessing functional performance and wheelchair user perceptions on device ergonomics and satisfaction of performance. A pilot study was implemented using this approach to evaluate differences among four manual wheelchairs. Six wheelchair users with complete spinal cord injury (SCI) at the thoracic level and with no previous upper limbs impairment were recruited for this study. After finishing circuit tasks, subjects were asked to complete a questionnaire about ergonomic wheelchair characteristics (manoeuvrability, stability, comfort and ease of propulsion) and satisfaction about task performance. On the other hand, objective data were recorded during user performance as the time required to complete each test, kinetic wheelchair propulsion data obtained with two SMARTWheels® and physiological parameters (heart rate and physiological index). Kuschall Champion® and Otto Bock Voyage® wheelchairs were ranked best for most ergonomic aspects specially in manoeuvrability (p importance of looking both kinds of information, user perception and user functional performance when evaluating a wheelchair or comparing across devices.

Determinants of business sustainability: an ergonomics perspective.

Science.gov (United States)

Genaidy, Ash M; Sequeira, Reynold; Rinder, Magda M; A-Rehim, Amal D

2009-03-01

There is a need to integrate both macro- and micro-ergonomic approaches for the effective implementation of interventions designed to improve the root causes of problems such as work safety, quality and productivity in the enterprise system. The objective of this study was to explore from an ergonomics perspective the concept of business sustainability through optimising the worker-work environment interface. The specific aims were: (a) to assess the working conditions of a production department work process with the goal to jointly optimise work safety, quality and quantity; (b) to evaluate the enterprise-wide work process at the system level as a social entity in an attempt to trace the root causes of ergonomic issues impacting employees throughout the work process. The Work Compatibility Model was deployed to examine the experiences of workers (that is, effort, perceived risk/benefit, performance and satisfaction/dissatisfaction or psychological impact) and their associations with the complex domains of the work environment (task content, physical and non-physical work environment and conditions for learning/growth/development). This was followed by assessment of the enterprise system through detailed interviews with department managers and lead workers. A system diagnostic instrument was also constructed from information derived from the published literature to evaluate the enterprise system performance. The investigation of the production department indicated that the stress and musculoskeletal pain experienced by workers (particularly on the day shift) were derived from sources elsewhere in the work process. The enterprise system evaluation and detailed interviews allowed the research team to chart the feed-forward and feedback stress propagation loops in the work system. System improvement strategies were extracted on the basis of tacit/explicit knowledge obtained from department managers and lead workers. In certain situations concerning workplace human

Using ergonomics checkpoints to support a participatory ergonomics intervention in an industrially developing country (IDC)--a case study.

Science.gov (United States)

Helali, Faramarz

2009-01-01

To achieve ergonomics awareness in 3 subsidiary companies, an intervention team was formed. The aims of this study were to implement basic ergonomics through a participatory ergonomics intervention process that can support a continuous learning process and lead to an improvement in health and safety as well as in the work systems in the organization. The findings of this study (i.e., method, continuous learning and integration) were key to making the participatory ergonomics intervention successful. Furthermore, 4 issues of the ergonomics checkpoints (i.e., work schedules, work tasks, healthy work organization and learning) for assessing the work system were found suitable for both changing work schedules and for improving the work system. This paper describes the result of this project and also the experiences gained and the conclusions reached from using the International Labour Office's ergonomics checkpoints in the industries of industrially developing country.

Development of a method to assess compliance with ergonomic posture in dental students

Science.gov (United States)

Garcia, Patrícia Petromilli Nordi Sasso; Wajngarten, Danielle; Campos, Juliana Alvares Duarte Bonini

2018-01-01

CONTEXT: The ergonomic posture protocol is extremely important for the maintenance of occupational health in dentistry. The lack of compliance with this protocol results in a high risk of developing musculoskeletal disorders. AIMS: This study developed a direct observation method for the evaluation of dental student compliance with ergonomic posture protocol. SUBJECTS AND METHODS: The method is named compliance assessment of dental ergonomic posture requirements (CADEP). During the development of the method, 14 items were elaborated considering the theory of dental ergonomics. Each item should be classified as appropriate, partially appropriate, or inappropriate. After evaluation, all item values should be added, and the final score expressed as the percent of compliance with correct postures, with a score range of 0%–100%. STATISTICAL ANALYSIS USED: The reliability of CADEP was assessed through intra- and interobserver reproducibility. For the CADEP application, 73 senior year students from the undergraduate course in dentistry were evaluated. The intra- and interexaminer concordance was estimated using the intraclass correlation coefficient (ρ). A descriptive statistical analysis was performed. RESULTS: The reproducibility of evaluator 1 (ρ =0.90; confidence interval [CI] 95%: 0.83–0.94), evaluator 2 (ρ = 0.83; CI 95%: 0.70–0.90), the interexaminer in the first evaluation (ρ = 0.81; CI 95%:0.67–0.89), and in the second one (ρ = 0.76; CI 95%: 0.59–0.87) was classified as good. In the analysis of the compliance, it was verified that moderate compliance was the most prevalent among the evaluated students (65.6%, CI 95%: 60.3%–70.7%). CONCLUSIONS: CADEP was valid and reliable for the assessment of dentistry students’ compliance regarding ergonomic posture requirements. PMID:29693025

Ergonomic evaluation of ten single-channel pipettes.

Science.gov (United States)

Lichty, Monica G; Janowitz, Ira L; Rempel, David M

2011-01-01

Repetitive pipetting is a task that is associated with work-related musculoskeletal disorders of the hand and arm. The purpose of this study was to evaluate the usability and ergonomic performance of commercially available pipettes as determined by user ratings and objective measurements. Participants were laboratory technicians and scientists at the Lawrence Berkeley National Laboratory with experience performing pipetting tasks. Twenty-one experienced pipette users completed a standardized pipetting task with 5 manual and 5 electronic pipettes. After using each pipette, the user rated it for attributes of comfort and usability. Although no single pipette was rated significantly better than all of the others for every attribute tested, some significant differences were found between pipettes. The Rainin Pipet-Lite received the highest overall quality score among manual pipettes, while the Thermo Scientific Finnpipette Novus was the top-ranked electronic pipette. Features correlated with greater hand and arm comfort were lower tip ejection force, lower blowout force, and pipette balance in the hand. The findings, when considered with participant comments, provide insights into desirable pipette features and emphasize the value of user testing and the importance of the interactions between task, workplace layout, and pipette design. © 2011 - IOS Press and the authors. All rights reserved

Ergonomics: case study in a university library

Directory of Open Access Journals (Sweden)

Daniela Capri

2012-08-01

Full Text Available This final paper aimed to analyze the real ergonomics of a university library from Florianópolis and compare it with the ergonomics perceived by the user to perform an ergonomic diagnosis. In order to meet this goal two specific goals were established such as: describe the physical and environmental aspects of the library related to the real ergonomics and verify the actual perception of users about the library. As a theoretical approach, aspects of ergonomics and environmental ergonomics were contextualized and linked to the library and the university library. Referring to the methodology, the Ergonomical Assessment of the Built Environment was used as a reference. The study subjects comprised a sample of 15, among students and library staff. In the results obtained, when related to the physical-environmental analysis of the library, it was found that there are some aspects that differ from the regulatory standards and that also fall short in relation to feedback from users. Aspects such as lighting and noise were cited as unsatisfactory, but the temperature factor was analyzed as satisfactory.

Good ergonomic practices in a terminal facility

Energy Technology Data Exchange (ETDEWEB)

Anjos, Luciana Mattos dos; Curty, Adriana Favacho [CHEMTECH, Rio de Janeiro, RJ (Brazil); Franca, Guilherme Foerster do Monte; Jardino, Alessandro Neto [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

2009-07-01

Ergonomics is the technological design of the interplay between men, machines and environment in order to make labor activities more pleasant, profitable and functional. This article analyses the importance of ergonomic issues in process terminal plants and facilities, since the conceptual design stage until the detail engineering design. The ergonomic solutions are compared with practices that are current in engineering design plants nowadays. It will be shown how an inadequate ergonomic design often leads to accessibility problems and non-effectiveness during plant operation and dangers in emergency situations. The way perform an ergonomic design is to integrate the various disciplines that are involved in all stages of the design plant. The earlier the ergonomic design is implemented the better are the results in cost reduction, since later design modifications are more time-consuming and expensive. (author)

Checklists change communication about key elements of patient care.

Science.gov (United States)

Newkirk, Michelle; Pamplin, Jeremy C; Kuwamoto, Roderick; Allen, David A; Chung, Kevin K

2012-08-01

Combat casualty care is distributed across professions and echelons of care. Communication within it is fragmented, inconsistent, and prone to failure. Daily checklists used during intensive care unit (ICU) rounds have been shown to improve compliance with evidence-based practices, enhance communication, promote consistency of care, and improve outcomes. Checklists are criticized because it is difficult to establish a causal link between them and their effect on outcomes. We investigated how checklists used during ICU rounds affect communication. We conducted this project in two military ICUs (burn and surgical/trauma). Checklists contained up to 21 questions grouped according to patient population. We recorded which checklist items were discussed during rounds before and after implementation of a "must address" checklist and compared the frequency of discussing items before checklist prompting. Patient discussions addressed more checklist items before prompting at the end of the 2-week evaluation compared with the 2-week preimplementation period (surgical trauma ICU, 36% vs. 77%, p communication patterns. Improved communication facilitated by checklists may be one mechanism behind their effectiveness. Checklists are powerful tools that can rapidly alter patient care delivery. Implementing checklists could facilitate the rapid dissemination of clinical practice changes, improve communication between echelons of care and between individuals involved in patient care, and reduce missed information.

Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design

Science.gov (United States)

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Background Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. Methodology/Principal Findings This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. Conclusions The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method’s usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method. PMID:23977340

Ergonomic evaluation of workload by milk production – a bibliometric analysis

Directory of Open Access Journals (Sweden)

Claudilaine Caldas de Oliveira

2017-09-01

The studies selected using the methodology indicate research in ergonomics focused on the production of milk in rural areas, specifically in the milking sector, are generally related to the health and safety of the workers.

A Comparison of the Autism Treatment Evaluation Checklist (ATEC) and the Childhood Autism Rating Scale (CARS) for the Quantitative Evaluation of Autism

Science.gov (United States)

Geier, David A.; Kern, Janet K.; Geier, Mark R.

2013-01-01

The purpose of this study was to evaluate scores generated from the Autism Treatment Evaluation Checklist (ATEC), a parent-rated measure, and those derived from professionally completed Childhood Autism Rating Scale (CARS) evaluations. A cohort of 56 participants diagnosed with an autism spectrum disorder was used for the study, and each child was…

Ergonomics in radiology

Energy Technology Data Exchange (ETDEWEB)

Goyal, N. [Department of Radiology, University Hospital of Wales, Cardiff (United Kingdom)], E-mail: nimitgoyal@doctors.org.uk; Jain, N.; Rachapalli, V. [Department of Radiology, University Hospital of Wales, Cardiff (United Kingdom)

2009-02-15

The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations.

Ergonomics in radiology

International Nuclear Information System (INIS)

Goyal, N.; Jain, N.; Rachapalli, V.

2009-01-01

The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations

Ergonomic material-handling device

Science.gov (United States)

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

Ergonomics and design: traffic sign and street name sign.

Science.gov (United States)

Moroni, Janaina Luisa da Silva; Aymone, José Luís Farinatti

2012-01-01

This work proposes a design methodology using ergonomics and anthropometry concepts applied to traffic sign and street name sign projects. Initially, a literature revision on cognitive ergonomics and anthropometry is performed. Several authors and their design methodologies are analyzed and the aspects to be considered in projects of traffic and street name signs are selected and other specific aspects are proposed for the design methodology. A case study of the signs of "Street of Antiques" in Porto Alegre city is presented. To do that, interviews with the population are made to evaluate the current situation of signs. After that, a new sign proposal with virtual prototyping is done using the developed methodology. The results obtained with new interviews about the proposal show the user satisfaction and the importance of cognitive ergonomics to development of this type of urban furniture.

Reducing musculoskeletal disorders among computer operators: comparison between ergonomics interventions at the workplace.

Science.gov (United States)

Levanon, Yafa; Gefen, Amit; Lerman, Yehuda; Givon, Uri; Ratzon, Navah Z

2012-01-01

Typing is associated with musculoskeletal disorders (MSDs) caused by multiple risk factors. This control study aimed to evaluate the efficacy of a workplace intervention for reducing MSDs among computer workers. Sixty-six subjects with and without MSD were assigned consecutively to one of three groups: ergonomics intervention (work site and body posture adjustments, muscle activity training and exercises) accompanied with biofeedback training, the same ergonomics intervention without biofeedback and a control group. Evaluation of MSDs, body posture, psychosocial status, upper extremity (UE) kinematics and muscle surface electromyography were carried out before and after the intervention in the workplace and the motion lab. Our main hypothesis that significant differences in the reduction of MSDs will exist between subjects in the study groups and controls was confirmed (χ(2) = 13.3; p = 0.001). Significant changes were found in UE kinematics and posture as well. Both ergonomics interventions effectively reduced MSD and improved body posture. This study aimed to test the efficacy of an individual workplace intervention programme among computer workers by evaluating musculoskeletal disorders (MSDs), body posture, upper extremity kinematics, muscle activity and psychosocial factors were tested. The proposed ergonomics interventions effectively reduced MSDs and improved body posture.

Ergonomics in the operating room: protecting the surgeon.

Science.gov (United States)

Rosenblatt, Peter L; McKinney, Jessica; Adams, Sonia R

2013-01-01

To review elements of an ergonomic operating room environment and describe common ergonomic errors in surgeon posture during laparoscopic and robotic surgery. Descriptive video based on clinical experience and a review of the literature (Canadian Task Force classification III). Community teaching hospital affiliated with a major teaching hospital. Gynecologic surgeons. Demonstration of surgical ergonomic principles and common errors in surgical ergonomics by a physical therapist and surgeon. The physical nature of surgery necessitates awareness of ergonomic principles. The literature has identified ergonomic awareness to be grossly lacking among practicing surgeons, and video has not been documented as a teaching tool for this population. Taking this into account, we created a video that demonstrates proper positioning of monitors and equipment, and incorrect and correct ergonomic positions during surgery. Also presented are 3 common ergonomic errors in surgeon posture: forward head position, improper shoulder elevation, and pelvic girdle asymmetry. Postural reset and motion strategies are demonstrated to help the surgeon learn techniques to counterbalance the sustained and awkward positions common during surgery that lead to muscle fatigue, pain, and degenerative changes. Correct ergonomics is a learned and practiced behavior. We believe that video is a useful way to facilitate improvement in ergonomic behaviors. We suggest that consideration of operating room setup, proper posture, and practice of postural resets are necessary components for a longer, healthier, and pain-free surgical career. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

Ergonomic Evaluation of Battery Powered Portable Cotton Picker

Science.gov (United States)

Dixit, A.; Manes, G. S.; Singh, A.; Prakash, A.; Mahal, J. S.

2012-09-01

Ergonomic evaluation of battery powered portable manual cotton picker was carried out on two subjects for three cotton varieties and was compared against manual method of picking. It is a hand operated machine and has a pair of chain with small sharp edged teeth and sprockets and is operated by a light weight 12 V battery. Cotton gets entangled with the chain and is collected and guided into the collection bag. Average heart rate, oxygen consumption, workload, energy expenditure was more in case of cotton picking by manual cotton picker as compared to manual picking for both the subjects for all three cotton variety types. Oxygen consumption varied from 0.81 to 0.97 l/min, workload varied from 36.32 to 46.16 W and energy expenditure varied from 16.83 to 20.33 kJ/min for both the subject in case of machine picking for all three cotton varieties. The maximum discomfort experienced by the subjects during picking cotton by manual cotton picker was in right wrist palm, right forearm, upper and lower back, left shoulder and in lower legs and both feet.

Ergonomics Contributions to Company Strategies

NARCIS (Netherlands)

J. Dul (Jan); W.P. Neumann (Patrick)

2008-01-01

textabstractManagers usually associate ergonomics with occupational health and safety and related legislation, not with business performance. In many companies, these decision makers seem not to be positively motivated to apply ergonomics for reasons of improving health and safety. In order to

Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

Science.gov (United States)

Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

2000-10-01

In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

Trapezius Muscle Activity in using Ordinary and Ergonomically Designed Dentistry Chairs

Directory of Open Access Journals (Sweden)

O Haddad

2012-03-01

Full Text Available Background: Most dentists complain of musculoskeletal disorders which can be caused by prolonged static posture, lack of suitable rest and other physical and psychological problems. Objective: We evaluated a chair with a new ergonomic design which incorporated forward leaning chest and arm supports. Methods: The chair was evaluated in the laboratory during task simulation and EMG analysis on 12 students and subjectively assessed by 30 professional dentists using an 18-item questionnaire. EMG activity of right and left trapezius muscles for 12 male students with no musculoskeletal disorders was measured while simulating common tasks like working on the teeth of the lower jaw. Results: Normalized EMG data showed significant reduction (p<0.05 in all EMG recordings of the trapezius muscle. Dentists also unanimously preferred the ergonomically designed chair. Conclusion: Such ergonomically designed chairs should be introduced as early as possible in student training before bad postural habits are acquired.

Ergonomic interventions for improving working postures associated with manual materials handling (case study: a mineral processing plant

Directory of Open Access Journals (Sweden)

Fateme Dehghani

2016-12-01

Full Text Available Introduction: A high percentage of musculoskeletal disorders in workplaces occur due to awkward posture and non-ergonomic design of the work stations for lifting and carrying of materials. To avoid these injuries, jobs should be designed in a way that ergonomics risk factors are controlled properly. The aim of this study was to utilize ergonomics interventions to minimize ergonomics risk factors in bag packing unit in a mineral processing plant. Material and Method: This cross sectional study was carried out among 20 workers of bag packing unit. Camera recording of working postures, evaluation of medical records, interview, and REBA technique were used to identify the ergonomic risk factors. Interventions included changing the conveyor belt height and the use of spring pallets (spring table. Data were analyzed using Paired T-Test by SPSS software version 18. Result: Before implementing ergonomics intervention, a total of 75% of evaluated postures by REBA technique obtained score of 8-10 (very high risk level and 25% had score of 11-15 (very high risk level that correspond to the action level 3 and 4, respectively. Following the implementation of ergonomics interventions, a total of 90% of the analyzed postures showed action level 2 (moderate risk level and the remainder 10 percent of evaluated postures showed high risk level. Comparison of REBA technique scores before and after implementing interventions showed a significant difference (P-value < 0.05. Conclusion: Based on the findings of this study, the implementation of ergonomics interventions has remarkably decreased the required action level and it may be able to improve work-related postures.

Guidance strategies for a participatory ergonomic intervention to increase the use of ergonomic measures of workers in construction companies: a study design of a randomised trial

Science.gov (United States)

2014-01-01

Background More than seven out of 10 Dutch construction workers describe their work as physically demanding. Ergonomic measures can be used to reduce these physically demanding work tasks. To increase the use of ergonomic measures, employers and workers have to get used to other working methods and to maintaining them. To facilitate this behavioural change, participatory ergonomics (PE) interventions could be useful. For this study a protocol of a PE intervention is adapted in such a way that the intervention can be performed by an ergonomics consultant through face-to-face contacts or email contacts. The objective of this study is to evaluate the effectiveness of the face-to-face guidance strategy and the e-guidance strategy on the primary outcome measure: use of ergonomic measures by individual construction workers, and on the secondary outcome measures: the work ability, physical functioning and limitations due to physical problems of individual workers. Methods/Design The present study is a randomised intervention trial of six months in 12 companies to establish the effects of a PE intervention guided by four face-to-face contacts (N = 6) or guided by 13 email contacts (N = 6) on the primary and secondary outcome measures at baseline and after six months. Construction companies are randomly assigned to one of the guidance strategies with the help of a computer generated randomisation table. In addition, a process evaluation for both strategies will be performed to determine reach, dose delivered, dose received, precision, competence, satisfaction and behavioural change to find possible barriers and facilitators for both strategies. A cost-benefit analysis will be performed to establish the financial consequences of both strategies. The present study is in accordance with the CONSORT statement. Discussion The outcome of this study will help to 1) evaluate the effect of both guidance strategies, and 2) find barriers to and facilitators of both guidance

Fundamentals of ergonomic exoskeleton robots

NARCIS (Netherlands)

Schiele, A.

2008-01-01

This thesis is the first to provide the fundamentals of ergonomic exoskeleton design. The fundamental theory as well as technology necessary to analyze and develop ergonomic wearable robots interacting with humans is established and validated by experiments and prototypes. The fundamentals are (1) a

Applying research to practice: generalist and specialist (visual ergonomics) consultancy.

Science.gov (United States)

Long, Jennifer; Long, Airdrie

2012-01-01

Ergonomics is a holistic discipline encompassing a wide range of special interest groups. The role of an ergonomics consultant is to provide integrated solutions to improve comfort, safety and productivity. In Australia, there are two types of consultants--generalists and specialists. Both have training in ergonomics but specialist knowledge may be the result of previous education or work experience. This paper presents three projects illustrating generalist and specialist (visual ergonomics) consultancy: development of a vision screening protocol, solving visual discomfort in an office environment and solving postural discomfort in heavy industry. These case studies demonstrate how multiple ergonomics consultants may work together to solve ergonomics problems. It also describes some of the challenges for consultants, for those engaging their services and for the ergonomics profession, e.g. recognizing the boundaries of expertise, sharing information with business competitors, the costs-benefits of engaging multiple consultants and the risk of fragmentation of ergonomics knowledge and solutions. Since ergonomics problems are often multifaceted, ergonomics consultants should have a solid grounding in all domains of ergonomics, even if they ultimately only practice in one specialty or domain. This will benefit the profession and ensure that ergonomics remains a holistic discipline.

Casting an ergonomic eye on university libraries.

Science.gov (United States)

Ferrer, Nicole; Villarouco, Vilma

2012-01-01

Research in the field of Ergonomics of the Built Environment has been developed with a view to consolidating studies in this area, the objective of which is to provide evidence that the joint participation of users and designers on drawing up projects is important. In this context, the theme of this study is to investigate the interactions between users and the environment in a university library. To do so, well-established techniques from Ergonomics, Architecture and Environmental Psychology were used to make a functional and behavioral evaluation to identify the level of user satisfaction in six libraries in the various study centers of the Federal University of Pernambuco in Recife, northeast Brazil, so as to identify the strengths and also weaknesses in these spatial structures.

Ergonomics for enhancing detection of machine abnormalities.

Science.gov (United States)

Illankoon, Prasanna; Abeysekera, John; Singh, Sarbjeet

2016-10-17

Detecting abnormal machine conditions is of great importance in an autonomous maintenance environment. Ergonomic aspects can be invaluable when detection of machine abnormalities using human senses is examined. This research outlines the ergonomic issues involved in detecting machine abnormalities and suggests how ergonomics would improve such detections. Cognitive Task Analysis was performed in a plant in Sri Lanka where Total Productive Maintenance is being implemented to identify sensory types that would be used to detect machine abnormalities and relevant Ergonomic characteristics. As the outcome of this research, a methodology comprising of an Ergonomic Gap Analysis Matrix for machine abnormality detection is presented.

Promoting ergonomics in Algeria: activities of "the research and training laboratory" in the University of Oran.

Science.gov (United States)

Mebarki, Bouhafs; El-Bachir, Tebboune Cheikh

2012-01-01

The growing need in Algeria to develop ergonomics knowledge and practice in industry was behind the initiative to develop a training and research project within the ergonomics laboratory at Oran University. Since 2005 the laboratory team is running an academic option master in work design and ergonomics. The evaluation of the academic master in 2010 revealed the acute need of the local industry for professional competences in ergonomic and work psychology. A professional training master program in "ergonomics & work psychology" was then developed in partnership with local industry, five European Universities and six Universities from three Maghreb countries. Research projects were initiated around the two training programs, in conjunction with a number of ergonomics dissemination and promotion activities. Preliminary results of the project are presented and discussed in relation to the local context, and in the light of similar cases in Industrially Developing Countries.

Ergonomics action research I: shifting from hypothesis testing to experiential learning.

Science.gov (United States)

Neumann, W P; Dixon, S M; Ekman, M

2012-01-01

This paper presents the case for the need for 'Action Research' (AR) approaches to gain understanding of how ergonomics considerations can best be integrated into the design of new work systems. The AR researchers work collaboratively with other stakeholders to solve a real-world problem: gaining insight into the problem and factors influencing solution building from an embedded position in the development process. This experience is interpreted in terms of available theory and can support further theory development. This non-experimental approach can help provide practical new approaches for integrating ergonomics considerations into real work system design processes. The AR approach suffers from a lack of acceptance by conventionally trained scientists. This paper aims to help overcome this weakness by developing the underlying theory and rationale for using AR approaches in ergonomics research. We propose further development of hybrid approaches which incorporate other evaluation techniques to extend the knowledge gains from AR projects. Researchers should engage directly with organisations in ergonomics projects so that they can better understand the challenges and needs of practitioners who are trying to apply available scientific knowledge in their own unique context. Such 'Action Research' could help develop theory and approaches useful to improve mobilisation and application of ergonomics knowledge in organisations.

An ergonomic intervention to reduce musculoskeletal discomfort among semiconductor assembly workers.

Science.gov (United States)

Aghilinejad, Mashallah; Azar, Neda Soleimanvandy; Ghasemi, Mohammad Sadegh; Dehghan, Naser; Mokamelkhah, Elahe Kabir

2016-06-14

Work-related musculoskeletal disorders (MSDs) and ergonomics-related injuries are the single largest category of workplace injuries and are responsible for almost 30% of all worker's compensation costs. Awkward working posture refers to positions of the body that deviate significantly from the neutral position while job tasks are being performed and it is the primary ergonomic risk factor for developing musculoskeletal discomfort. This study was conducted among assembly workers of a semiconductor in Tehran province with the objective of implementing an interventional ergonomic program to minimize musculoskeletal discomfort. This study that was conducted on 105 male assembly workers of a semiconductor industry based on a census method. The standardized Nordic Musculoskeletal Questionnaire (NMQ) was used to determine the prevalence of MSDs. Corlett and Bishop's body part discomfort scale (BPD) was applied to evaluate body discomfort before and after the intervention (using a magnifying loupes to improve visibility of the parts). The results of NMQ showed the highest rate of MSDs were in neck, shoulder, upper arm and lower back regions (more than 75%). After ergonomic intervention, significant decrements of discomfort was observed in neck, shoulder, upper arm, elbows, lower arm, lower back and whole body discomfort (p ergonomic interventions can decrease MSDs of at risk body regions in the long term.

Study on application of safety checklist in preventive maintenance activities

International Nuclear Information System (INIS)

Shi Jin; Chen Song; Liu Jingquan

2013-01-01

The paper describes the principles and the characteristics of safety checklist as a risk evaluation method. Examples of application of safety checklists to preventive maintenance activities such as criteria comparison and checkup items in place in nuclear power plants are illustrated in details with issues appeared in the checklist establishment. Checklist has a good application in the RCM analysis or in the actual preventive maintenance program for Chashma Nuclear Power Plant indicated by concrete instances. In the light of safety checklist which is used to sustain preventive maintenance as a simple and applicable risk analysis approach, we can get deep knowledge of risks of nuclear power plant to perfect preventive maintenance activities. (authors)

Ergonomics in dentistry: experiences of the practice by dental students.

Science.gov (United States)

Garcia, P P N S; Gottardello, A C A; Wajngarten, D; Presoto, C D; Campos, J A D B

2017-08-01

The aim of this study was to qualitatively evaluate the experiences of students enrolled in the last year of dentistry school with ergonomic practice. This is a qualitative, observational and cross-sectional study, with a non-probabilistic sample design. The sample comprised students enrolled in the last year of dentistry in Araraquara-UNESP (n = 29). The data were collected by means of open semi-structured and individual interviews, captured by a digital voice recorder. The students were interviewed in their own university at a time that was previously scheduled, and care was taken to provide a private and welcoming environment to carry out the interviews. A script containing questions related to practices in ergonomics was prepared at the university. Data analysis was carried out using the qualitative-quantitative Collective Subject Discourse technique with the aid of Qualiquantisoft ® software program. It was found that more than half of the students (58.6%) believe that adopting an ergonomic posture is important to prevent future problems, pain and occupational diseases, and 62.1% of the students confirm having difficulties in adopting ergonomic postures due to the types of treatment required and the regions of the mouth being treated. The main reasons stated for the fact that their colleagues do not adopt ergonomic postures are lack of attention, practice and forgetfulness (44.8%) and difficulty in visualising the operatory field or the procedure performed (27.6%). It is possible to conclude that the students interviewed know ergonomic principles and their importance in occupational health. However, they found it difficult to put these principles into practice. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

The Changes of Ergonomics in Hungary and Engineering Education

OpenAIRE

Istvan Lükö

2013-01-01

Modern engineer training is not conceivable without knowledge of work psychology and ergonomics. In this paper, we would like to outline the situation of work psychology and ergonomics as well as their changes in Hungary. The technical approach to health and safety is linked to human health care, and, through that, to ergonomics. The traditional notion of ergonomics is the 'ergonomics of scales, levers and pedals', which has now become a field of research helping the development of socio-tech...

The Changes of Ergonomics in Hungary and Engineering Education

Directory of Open Access Journals (Sweden)

Istvan Lükö

2013-01-01

Full Text Available Modern engineer training is not conceivable without knowledge of work psychology and ergonomics. In this paper, we would like to outline the situation of work psychology and ergonomics as well as their changes in Hungary. The technical approach to health and safety is linked to human health care, and, through that, to ergonomics. The traditional notion of ergonomics is the 'ergonomics of scales, levers and pedals', which has now become a field of research helping the development of socio-technical systems. Here, we present the developmental stages of ergonomics, divided into six periods, first, and then the relationship between environmental ergonomics and health and safety. In the last chapter, I shall expound a few details from Hungarian investigations in work psychology, as well as from the activity of prominent academic circles at certain universities.

Translating concepts of complexity to the field of ergonomics.

Science.gov (United States)

Walker, Guy H; Stanton, Neville A; Salmon, Paul M; Jenkins, Daniel P; Rafferty, Laura

2010-10-01

Since 1958 more than 80 journal papers from the mainstream ergonomics literature have used either the words 'complex' or 'complexity' in their titles. Of those, more than 90% have been published in only the past 20 years. This observation communicates something interesting about the way in which contemporary ergonomics problems are being understood. The study of complexity itself derives from non-linear mathematics but many of its core concepts have found analogies in numerous non-mathematical domains. Set against this cross-disciplinary background, the current paper aims to provide a similar initial mapping to the field of ergonomics. In it, the ergonomics problem space, complexity metrics and powerful concepts such as emergence raise complexity to the status of an important contingency factor in achieving a match between ergonomics problems and ergonomics methods. The concept of relative predictive efficiency is used to illustrate how this match could be achieved in practice. What is clear overall is that a major source of, and solution to, complexity are the humans in systems. Understanding complexity on its own terms offers the potential to leverage disproportionate effects from ergonomics interventions and to tighten up the often loose usage of the term in the titles of ergonomics papers. STATEMENT OF RELEVANCE: This paper reviews and discusses concepts from the study of complexity and maps them to ergonomics problems and methods. It concludes that humans are a major source of and solution to complexity in systems and that complexity is a powerful contingency factor, which should be considered to ensure that ergonomics approaches match the true nature of ergonomics problems.

Ergonomic Improvements for Foundries

Energy Technology Data Exchange (ETDEWEB)

Frank Peters; Patrick Patterson

2002-06-18

The goal of this project was to make improvements to the production systems of the steel casting industry through ergonomic improvements. Because of the wide variety of products, the wide range of product sizes, and the relatively small quantities of any particular product, manual operations remain a vital part of the production systems of the steel casting companies. Ergonomic improvements will assist the operators to more efficiently and consistently produce quality products.

Effectiveness of Ergonomic Chair against Musculoskeletal Disorders in Female Batik Workers of Sragen District

Directory of Open Access Journals (Sweden)

Sumardiyono Sumardiyono

2014-08-01

Full Text Available The majority of female batik workers uses non-ergonomic chairs (dingklik that pose risks of musculoskeletal disorders. This study aimed to design an ergonomic chair and evaluate its effectiveness in reducing musculoskeletal disorders among the workers. This is a quasi-experimental study (using one group pre and post-test design on 50 female batik workers selected by quota sampling. Musculoskeletal disorders were measured among the samples before and after the use of the designed ergonomic chair which they were asked to use for two months. T-test, ANCOVA, Wilcoxon test, McNemar test and Chi Square test were used for the analysis. The study found statistical significant differences of risk factor against musculoskeletal disorders among the workers before and after their use of the designed ergonomic chair (p=0.000; and of musculoskeletal disorders before and after using the ergonomic chair (p= 0,035. Body Mass Index (BMI was identified as a confounding factor, and statistical significant difference of musculoskeletal disorders were also found among the workers with 25 BMI even before and after using the ergonomic chair (p=0.033 and p=0.015 respectively. By ANCOVA statistical test, after controlling BMI, another statistical difference of musculoskeletal disorders was also identified before and after using the ergonomic chair (p=0.033. It is concluded that the designed ergonomic chair is effective to reduce the risk of musculoskeletal disorders.

Sustainable Ergonomic Program - Basic Condition for Implementation of Corporate Social Responsibility

Science.gov (United States)

Marková, Petra; Beňo, Rastislav; Hatiar, Karol

2012-12-01

Gradually increasing pressure on companies to start to behave socially responsible is a response to social, environmental and economic requirements. The society faces a period of changes that have occurred since the beginning of the crisis and revealing weaknesses in the economy. We become witnesses of rapid changes and challenges posed by globalization, lack of resources, demographic structure and innovation. Objective necessity becomes a corporate social responsibility (CSR) already at the companies’ level, which is supported by the approach of the EU institutions and the Slovak Republic. One of the possible appliance through which we can contribute to the sustainability of CSR are sustainable ergonomic programs. When we want to talk about sustainable ergonomic program is important to focus on three key areas. The first area is the Impact of technic and technology to employees at work, the second area is the Importance and impact of socially responsible HR in ergonomics and last area is the Creation of the work environment in relation to environmental sustainability. Ergonomic programs sustainability requires to apply appropriate methods for evaluation of their cost benefit and health effect.

Ergonomía

OpenAIRE

Rodríguez Mondelo, Pedro Manuel

1999-01-01

Conté: 1. Fundamentos. 2. Confort y estrés térmico. La obra ofrece una visión general de los aspectos básicos de la ergonomía. Está dividida en ocho capítulos, que abordan los temas de relaciones dimensionales, relaciones informáticas y de control, relaciones ambientales, gasto energético y capacidad de trabajo físico y trabajo mental. El libro pretende ser una guía básica para aquellas personas que se inicien en el apasionante campo de la ergonomía.

Ergonomic risk: social representations of dental students

Directory of Open Access Journals (Sweden)

Luana Kelle Batista Moura

2014-01-01

Full Text Available Objective: To learn the social representations of ergonomic risk prepared ​​by dental students. Methodology: This exploratory study, subsidized the Theory of Social Representations, with 64 dental students of an educational institution, by means of interviews. The data were processed in Alceste4.8 and lexical analysis done by the descending hierarchical classification. Results: In two categories: knowledge about exposure to ergonomic risk end attitude of students on preventing and treating injuries caused by repetitive motion. For students, the ergonomic risk is related to the attitude in the dental office. Conclusion: Prevention of ergonomic risk for dental students has not been incorporated as a set of necessary measures for their health and the patients, to prevent ergonomic hazards that can result in harm to the patient caused by work-related musculoskeletal disorder, which is reflected in a lower quality practice.

Experiences in Using Practitioner’s Checklists to Evaluate the Relevance of Experiments Reported in Requirements Engineering

NARCIS (Netherlands)

Daneva, Maia; Sikkel, Nicolaas; Condori-Fernandez, Nelly; Herrmann, Andrea

Background: Requirements Engineering (RE) researchers recognize that for RE methods to be adopted in industry, practitioners should be able to evaluate the relevance of a study to their practice. Kitchenham et al proposed a set of perspective-based checklists, which demonstrated to be a useful

Syndrome dimensions of the Child Behavior Checklist and the Teacher Report Form : a critical empirical evaluation

NARCIS (Netherlands)

Hartman, CA; Hox, J; Auerbach, J; Erol, N; Fonseca, AC; Mellenbergh, GJ; Novik, TS; Oosterlaan, J; Roussos, AC; Shalev, RS; Zilber, N; Sergeant, JA

1999-01-01

The construct representation of the cross-informant model of the Child Behavior Checklist (CBCL) and the Teacher Report Form (TRF) was evaluated using confirmatory factor analysis. Samples were collected in seven different countries. The results are based on 13,226 parent ratings and 8893 teacher

OBJECTIFICATION OF ERGONOMIC ASSESSMENT OF THE PILOT OPERATION ON THE BASIS OF “PHOTOSHOP – TECHNOLOGY”

Directory of Open Access Journals (Sweden)

Volodymyr Gorbunov

2013-12-01

Full Text Available On the basis of information technology “Photoshop” the means of the objective ergonomic evaluation of the professional activity of pilot on piloting the plane has been developed. Procedural characteristics, peculiarities and objective criteria if his work on aviation equipment is ergonomically acceptable, as well as the order of revealing the ergonomic shortcomings of the arrangement of his working place that decrease the flight safety from the position of human factor have been determined

Construction and application of an indicator system to assess the ergonomic performance of large and medium-sized construction companies.

Science.gov (United States)

Bezerra, Isabela Xavier Barbalho; de Carvalho, Ricardo José Matos

2012-01-01

This article proposes a system of indicators to evaluate the performance of companies in ergonomics for buildings. The system was developed based primarily on studies related to the performance evaluation of the construction industry and on Brazilian standards of ergonomics and work safety and had also the contribution of national and international indicators related to ergonomics, work safety, quality, sustainability, quality of work life and to organizational behavior. The indicators were named, classified and their components were assigned to compose the theoretical model SIDECE--System of Performance Indicators in Ergonomics for Building Construction (as for the Portuguese acronym), serving the major goals of ergonomics: health, safety and workers' satisfaction and production efficiency. The SIDECE is being validated along with the building construction companies in the city of Natal, Brazil, whose practical results, deriving from the application of instruments to collect field data, are under process, to be presented on the occasion of the 18th World Congress on Ergonomics. It is intended that the SIDECE be used by building construction companies as a support tool for excellence management.

Ergonomics Risk Assessment with Participation of Supervisors in Production Line: a Successful Experience in Pars Khodro Company

Directory of Open Access Journals (Sweden)

Adel Mazloumi

2014-04-01

Full Text Available Background & Objectives: According to previous researches, workers' participation in issues affecting their working condition is the key to success in ergonomics interventions in working environments. Therefore, the present study was performed to increase active particapitation of supervisors in production line and also to identify and assess ergonomics risks and presenting modification actions (Kaizen by themselves in Pars Khodro automobile manufacturing company. Methods: A manual regarding lifting objects and body postures, according to the Finish evaluation method, was provided for supervisors in production line and related trainings were presented to them. Then, they were asked to insert the results of their assessments and suggestions in special forms during one year. The presented assessments and suggestions were examined by ergonomics experts. Results: According to the assessments conducted by supervisors, 26 work stations had high ergonomics risks, 51 had ergonomics risks with an average level, and 45 had low ergonomics risks. Moreover, the number of required Kaizens presented by supervisors was increased from 18 cases in the first year to 42 cases in the second year, after implementation of ergonomics training and identifying and assessing ergonomic risks by supervisors. Conclusion: Empowering and training supervisors increased workers' participation. In case of adequate training, supervisors can present practical solutions to reduce ergonomics risks in their workstations.

Optimal ergonomics for laparoscopic surgery in minimally invasive surgery suites: a review and guidelines.

Science.gov (United States)

van Det, M J; Meijerink, W J H J; Hoff, C; Totté, E R; Pierie, J P E N

2009-06-01

With minimally invasive surgery (MIS), a man-machine environment was brought into the operating room, which created mental and physical challenges for the operating team. The science of ergonomics analyzes these challenges and formulates guidelines for creating a work environment that is safe and comfortable for its operators while effectiveness and efficiency of the process are maintained. This review aimed to formulate the ergonomic challenges related to monitor positioning in MIS. Background and guidelines are formulated for optimal ergonomic monitor positioning within the possibilities of the modern MIS suite, using multiple monitors suspended from the ceiling. All evidence-based experimental ergonomic studies conducted in the fields of laparoscopic surgery and applied ergonomics for other professions working with a display were identified by PubMed searches and selected for quality and applicability. Data from ergonomic studies were evaluated in terms of effectiveness and efficiency as well as comfort and safety aspects. Recommendations for individual monitor positioning are formulated to create a personal balance between these two ergonomic aspects. Misalignment in the eye-hand-target axis because of limited freedom in monitor positioning is recognized as an important ergonomic drawback during MIS. Realignment of the eye-hand-target axis improves personal values of comfort and safety as well as procedural values of effectiveness and efficiency. Monitor position is an important ergonomic factor during MIS. In the horizontal plain, the monitor should be straight in front of each person and aligned with the forearm-instrument motor axis to avoid axial rotation of the spine. In the sagittal plain, the monitor should be positioned lower than eye level to avoid neck extension.

Musculoskeletal Injuries and Their Associated Risk Factors

OpenAIRE

M Jahangiri; H Rahimi Fard; A.R Choobineh; S Mahmood Khani

2012-01-01

Background and aims :Prevalence of musculoskeletal disorders (MSDs) is high among office workers. Long time seated posture, working with computer, repetitive movements and inappropriate environmental conditions may have causal effects in these disorders. High prevalence rate of MSDs makes ergonomics assessment and working conditions improvement necessary. Designing an assessment checklist and calculating ergonomics indices can be useful in this evaluation. This study was conducted with the ob...

Ergonomics and sustainable development in the past two decades (1992-2011): Research trends and how ergonomics can contribute to sustainable development.

Science.gov (United States)

Radjiyev, Ayubkhon; Qiu, Hai; Xiong, Shuping; Nam, KyungHyun

2015-01-01

The need for sustainable development has been widely recognized and sustainable development has become a hot topic of various disciplines even though the role of ergonomics in it is seldom reported or considered. This study conducts a systematic survey of research publications in the fields of ergonomics and sustainable development over the past two decades (1992-2011), in order to identify their research trends and convergent areas where ergonomics can play an important role in sustainable development. The results show that 'methods and techniques', 'human characteristics', 'work design and organization', 'health and safety' and 'workplace and equipment design' are the top five frequently researched areas in ergonomics. Ergonomics has an opportunity to contribute its knowledge especially to 'industrial and product design', 'architecture', 'health and safety' and 'HCI' (especially for energy reduction issues) categories of sustainable development. Typical methodologies and general guidance on how to contribute the expertise of ergonomist to sustainable development are also discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

How can ergonomic practitioners learn to practice a macro-ergonomic framework developed in academia?

DEFF Research Database (Denmark)

Broberg, Ole; Seim, Rikke; Andersen, Vibeke

2009-01-01

How can a macro-ergonomic framework developed in academia be “transferred” to ergonomic practitioners and become a new work practice? The purpose of this paper is to reflect upon experiences from an interactive research program in which this transferral was tested by two consecutive approaches......” with the researchers and other practitioners; 3) paying attention to the organizational settings of the ergonomic practitioner to make sure that a new work practice is implemented in the organization and not only by a single practitioner....... and interpretation of results when applying the new concept to a real case in a company; 2) the concept is introduced to practitioners, after which they try to practice the concept in a normal consultancy situation, and afterwards have the opportunity to reflect upon their experiences in a “learning space...

The charge of ergonomics--a model according to the influence of ergonomic workplace design for economical and efficient indicators of the automotive industry.

Science.gov (United States)

Neubert, Nicole; Bruder, Ralph; Toledo, Begoña

2012-01-01

The importance of ergonomic workplace design has been rising incredibly. The knowledge of the interaction with a view to many indicators (e.g. operators' health, quality, productivity etc.) in the automotive assembly shop pushed into another thinking of ergonomics and an increasing awareness of economic possibilities relating to benefits and cost savings aligned with ergonomics. The paper discusses exemplary the various indicators and factors which could be influenced by ergonomic workplace design. These factors are linked each other and support the statement of ergonomic efficiency. Thus, the aim of this paper is to present a model which describes that investments in ergonomic work placement acts with preventive measurements, minimization of losses (refinishing operations, compensation money etc.) and extensive economies on the whole company.

資訊檢索指導員評鑑量表之探討 A Study of Evaluation Checklist on the Performance of Information Intermediaries

Directory of Open Access Journals (Sweden)

Shih-hsion Huang

1998-09-01

Full Text Available 無The main purpose of this study is to induce important factors of a good performance of information intermediaries by developing the evaluation checklist. By employing the Delphi Method, first step is to collect Delphi panel's (people who are/were in charge of reference and information services in university libraries opinions by open questionnaire. Upon them, a constructive questionnaire is developed and sent out to experts to rank on the degree of importance of evaluation items. A final consensus among the experts is gotten in the second round of Delphi process. An evaluation checklist of information intermediaries is established based on the study result. According the result of the study, the final evaluation checklist comprised seven parts with 191 items totally. That can be a reference to related fields and following researches.

Ergonomics and epidemiology in evidence based health prevention

DEFF Research Database (Denmark)

Jensen, Olaf Chresten

2009-01-01

According to the definitions, ergonomics is a natural part of the health and safety activity but it has its own research methods and causal models. Public health, occupational and clinical medicines are closely related to epidemiology and differ from ergonomics by using a disease model with a wide...... success of health effects from the clinical trials could not be obtained. It is argued that the ergonomics design, Integration and Implementation can be strengthened by adapting the epidemiological methods and causal models. The ergonomics can then contribute to a common development of public health...

Ergonomics in laparoscopic surgery

Directory of Open Access Journals (Sweden)

Supe Avinash

2010-01-01

Full Text Available Laparoscopic surgery provides patients with less painful surgery but is more demanding for the surgeon. The increased technological complexity and sometimes poorly adapted equipment have led to increased complaints of surgeon fatigue and discomfort during laparoscopic surgery. Ergonomic integration and suitable laparoscopic operating room environment are essential to improve efficiency, safety, and comfort for the operating team. Understanding ergonomics can not only make life of surgeon comfortable in the operating room but also reduce physical strains on surgeon.

Ergonomic design for dental offices.

Science.gov (United States)

Ahearn, David J; Sanders, Martha J; Turcotte, Claudia

2010-01-01

The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.

Activities and Ergonomics of Workers in Broiler Hatcheries

Directory of Open Access Journals (Sweden)

CCS Carvalho

2015-06-01

Full Text Available The objective this study was to assess ergonomic factors, posture and biomechanics of workers of a broiler egg hatchery. The analysis of ergonomic factors was based on physical work load, thermal environment, and exposure to light and noise. The posture of workers was analyzed using photographic records which were evaluated by the software program OWAS (Ovako Working Posture Analysing System. A biomechanics analysis was also performed based on the photographs taken of the employee at various angles, which were used as inputs to the Michigan two-dimensional biomechanical model software program. The results show that certain activities can be considered unhealthy due to the exposure of employees to physical and thermal overload. The continuous noise levels and lighting were outside the range considered adequate by the regulations of the Brazilian Ministry of Labor. The manner in which certain activities are carried out when associated with weight and poor posture can result in body lesions in broiler hatchery employees. It is therefore necessary to apply specific ergonomic programs, including scheduled breaks, training, and other measures in order to reduce or to eliminate the risks involved in these activities.

An ergonomic evaluation comparing desktop, notebook, and subnotebook computers.

Science.gov (United States)

Szeto, Grace P; Lee, Raymond

2002-04-01

To evaluate and compare the postures and movements of the cervical and upper thoracic spine, the typing performance, and workstation ergonomic factors when using a desktop, notebook, and subnotebook computers. Repeated-measures design. A motion analysis laboratory with an electromagnetic tracking device. A convenience sample of 21 university students between ages 20 and 24 years with no history of neck or shoulder discomfort. Each subject performed a standardized typing task by using each of the 3 computers. Measurements during the typing task were taken at set intervals. Cervical and thoracic spines adopted a more flexed posture in using the smaller-sized computers. There were significantly greater neck movements in using desktop computers when compared with the notebook and subnotebook computers. The viewing distances adopted by the subjects decreased as the computer size decreased. Typing performance and subjective rating of difficulty in using the keyboards were also significantly different among the 3 types of computers. Computer users need to consider the posture of the spine and potential risk of developing musculoskeletal discomfort in choosing computers. Copyright 2002 by the American Congress of Rehabilitation Medicine and the American Academy of Physical Medicine and Rehabilitation

Use of Ergonomic Measures Related to Musculoskeletal Complaints among Construction Workers: A 2-year Follow-up Study

Science.gov (United States)

Boschman, Julitta S.; Frings-Dresen, Monique H.W.; van der Molen, Henk F.

2015-01-01

Background The physical work demands of construction work can be reduced using ergonomic measures. The aim of this study was to evaluate the use of ergonomic measures related to musculoskeletal disorders (MSDs) among construction workers. Methods A questionnaire was sent at baseline and 2 years later to 1,130 construction workers. We established (1) the proportion of workers reporting an increase in their use of ergonomic measures, (2) the proportion of workers reporting a decrease in MSDs, (3) the relative risk for an increase in the use of ergonomic measures and a decrease in MSDs, and (4) workers' knowledge and opinions about the use of ergonomic measures. Results At follow-up, response rate was 63% (713/1,130). The proportion of workers using ergonomic measures for vertical transport increased (34%, 144/419, p < 0.01); for measures regarding horizontal transport and the positioning of materials, no change was reported. The proportion of workers reporting shoulder complaints decreased (28%, 176/638, p = 0.02). A relationship between the use of ergonomic measures and MSDs was not found; 83% (581/704) of the workers indicated having sufficient knowledge about ergonomic measures. Lightening the physical load was reported to be the main reason for using them. Conclusion Only the use of ergonomic measures for vertical transport increased over a 2-year period. No relationship between the use of ergonomic measures and MSDs was found. Strategies aimed at improving the availability of ergonomic equipment complemented with individualized advice and training in using them might be the required next steps to increase the use of ergonomic measures. PMID:26106507

Skeletal survey quality in non-accidental injury – A single site evaluation of the effects of imaging checklists

International Nuclear Information System (INIS)

Weldon, J.; Price, R.

2016-01-01

Aims: Evidence suggests ongoing practice variability in the quality of skeletal survey examinations for non-accidental injury. The purpose of the study was to investigate the effects on examination quality following the implementation of imaging checklists. Method: A retrospective evaluation of skeletal survey examinations was carried out on studies performed between January 2007 and November 2014 at a large District General Hospital Trust. Longitudinal assessment was undertaken over three periods, before and following the introduction of two versions of imaging checklists, following modifications. Examinations were assessed and scored using three measures for completeness and quality employing a modified established scoring system against a professional body national standards document. Results: A total of 121 examinations met the inclusion criteria, all quality assessment measures showed improvements between each period. Examination completeness increased from median of 13 projections, to 20 throughout the three periods. Mann Whitney u Tests showed significant differences between each period. The mean combined anatomy score reduced from 3.11 to 1.10 throughout the three periods. Independent t Tests and Mann Whitney u Tests showed a significant decrease throughout the study period. Total percentage examination quality increased from median 44–83% throughout the three periods. Independent t Tests also showed significant differences between each period. Conclusion: The use of imaging checklists to improve quality and to support the optimal acquisition of the non-accidental injury skeletal survey shows encouraging results. However, further work is needed to optimise content and the use of checklists in practice. - Highlights: • Skeletal survey examinations for non-accidental practices have been shown to vary in content and in quality. • Checklists have demonstrated improvements in compliance to guidelines across health disciplines and in various settings. �

[Adherence to the use of the surgical checklist for patient safety].

Science.gov (United States)

Maziero, Eliane Cristina Sanches; de Camargo Silva, Ana Elisa Bauer; de Fátima Mantovani, Maria; de Almeida Cruz, Elaine Drehmer

2015-12-01

Evaluate adherence to the checklist of the Programa Cirurgias Seguras (safe surgery programme) at a teaching hospital. Evaluative study conducted at a teaching hospital in the south of Brazil in 2012. Data were collected by means of non-participant observation in 20 hip and knee replacement surgeries and an instrument that was created for research based on the checklist and used by the institution. In the observed procedures (n=20) there was significant adhesion (pbreak and materials count. The results showed that the items on the checklist were verified nonverbally and there was no significant adherence to the instrument.

Cultural ergonomics in interactional and experiential design: conceptual framework and case study of the Taiwanese twin cup.

Science.gov (United States)

Lin, Chih-Long; Chen, Si-Jing; Hsiao, Wen-Hsin; Lin, Rungtai

2016-01-01

Cultural ergonomics is an approach that considers interaction- and experience-based variations among cultures. Designers need to develop a better understanding of cultural ergonomics not just to participate in cultural contexts but also to develop interactive experiences for users. Cultural ergonomics extends our understanding of cultural meaning and our ability to utilize such understanding for design and evaluate everyday products. This study aims to combine cultural ergonomics and interactive design to explore human-culture interaction in user experiences. The linnak is a typical Taiwanese aboriginal cultural object. This study examined the cultural meaning and operational interface of the linnak, as well as the scenarios in which it is used in interaction and user experiences. The results produced a cultural ergonomics interface for examining the manner in which designers communicate across cultures as well as the interweaving of design and culture in the design process. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Design and Evaluation of Ergonomic Interventions for the Prevention of Musculoskeletal Disorders in India

Science.gov (United States)

2014-01-01

Background Improper workstation, work procedures and tools are found to be the risk factors for the development of musculoskeletal disorders among the informal sector workers of the developing countries. Low cost ergonomic interventions can effectively improve such adverse conditions. Case presentation In the present article some studies related to design interventions in different informal and agricultural sectors were discussed and their efficacies were analyzed. It was observed that with the help of appropriate interventions musculoskeletal disorders were reduced, adverse physiological conditions were improved when awkward postures were corrected and ultimately the organisational productivity was increased. Conclusion Proper implementation of ergonomic interventions can ultimately improve the economy of the nation. PMID:25009740

Ergonomic initiatives at Inmetro: measuring occupational health and safety.

Science.gov (United States)

Drucker, L; Amaral, M; Carvalheira, C

2012-01-01

This work studies biomechanical hazards to which the workforce of Instituto Nacional de Metrologia, Qualidade e Tecnologia Industrial (Inmetro) is exposed. It suggests a model for ergonomic evaluation of work, based on the concepts of resilience engineering which take into consideration the institute's ability to manage risk and deal with its consequences. Methodology includes the stages of identification, inventory, analysis, and risk management. Diagnosis of the workplace uses as parameters the minimal criteria stated in Brazilian legislation. The approach has several prospectives and encompasses the points of view of public management, safety engineering, physical therapy and ergonomics-oriented design. The suggested solution integrates all aspects of the problem: biological, psychological, sociological and organizational. Results obtained from a pilot Project allow to build a significant sample of Inmetro's workforce, identifying problems and validating the methodology employed as a tool to be applied to the whole institution. Finally, this work intends to draw risk maps and support goals and methods based on resiliency engineering to assess environmental and ergonomic risk management.

Physical Ergonomics and Musculoskeletal Disorders: What's hot? What's cool?

NARCIS (Netherlands)

Beek, A.J. van der; IJmker, S.

2007-01-01

This chapter discusses the physical ergonomics and musculoskeletal disorders and summarizes the Triennial International Ergonomics Association (IEA) World Congress 2006-IEA2006-highlights on physical ergonomics and work-related MusculoSkeletal Disorders (MSDs). Two general trends are observed.

Development of a program logic model and evaluation plan for a participatory ergonomics intervention in construction.

Science.gov (United States)

Jaegers, Lisa; Dale, Ann Marie; Weaver, Nancy; Buchholz, Bryan; Welch, Laura; Evanoff, Bradley

2014-03-01

Intervention studies in participatory ergonomics (PE) are often difficult to interpret due to limited descriptions of program planning and evaluation. In an ongoing PE program with floor layers, we developed a logic model to describe our program plan, and process and summative evaluations designed to describe the efficacy of the program. The logic model was a useful tool for describing the program elements and subsequent modifications. The process evaluation measured how well the program was delivered as intended, and revealed the need for program modifications. The summative evaluation provided early measures of the efficacy of the program as delivered. Inadequate information on program delivery may lead to erroneous conclusions about intervention efficacy due to Type III error. A logic model guided the delivery and evaluation of our intervention and provides useful information to aid interpretation of results. © 2013 Wiley Periodicals, Inc.

Development of a Program Logic Model and Evaluation Plan for a Participatory Ergonomics Intervention in Construction

Science.gov (United States)

Jaegers, Lisa; Dale, Ann Marie; Weaver, Nancy; Buchholz, Bryan; Welch, Laura; Evanoff, Bradley

2013-01-01

Background Intervention studies in participatory ergonomics (PE) are often difficult to interpret due to limited descriptions of program planning and evaluation. Methods In an ongoing PE program with floor layers, we developed a logic model to describe our program plan, and process and summative evaluations designed to describe the efficacy of the program. Results The logic model was a useful tool for describing the program elements and subsequent modifications. The process evaluation measured how well the program was delivered as intended, and revealed the need for program modifications. The summative evaluation provided early measures of the efficacy of the program as delivered. Conclusions Inadequate information on program delivery may lead to erroneous conclusions about intervention efficacy due to Type III error. A logic model guided the delivery and evaluation of our intervention and provides useful information to aid interpretation of results. PMID:24006097

Evaluation of influence of stretching therapy and ergonomic factors on postural control in patients with chronic non-specific low back pain

Directory of Open Access Journals (Sweden)

Piotr Gawda

2015-02-01

Full Text Available [b]Introduction and objectives. [/b]The vertical orientation of the body in the upright standing position is maintained by keeping the body’s centre of gravity (COG upright, above the base of support, by a dynamic interplay of visual, vestibular, and somatosensory control systems. The objectives of this study were: to compare the postural control strategy between people with and without low back pain (LBP, to estimate the influence of the stretching therapy on the postural control strategy, and to discover the relationship between the restriction of spine mobility and occurrence of some ergonomic factors. [b]Materials and methods.[/b] The study consisted of 32 patients with LBP and 25 healthy controls. Postural characteristics of the subjects were measured with the use of a computerized force platform. The software programme filters and measures COG sway velocity in different conditions. Additional measurements and tests were conducted in patients after stretching therapy. Based on survey research, all individuals were selected and evaluated from the aspect of ergonomics. [b]Results[/b]. The results of the COG sway velocity vary under the testing conditions. From the aspect of ergonomic attitude and influence of the rehabilitation, results varied in the groups. [b]Conclusions[/b]. Ergonomic factors are often accompanied by the appearance of LBP. The restrictions within the musculoskeletal system cause disorders in muscle synergies, which is expressed by an increase in the angular velocity of the COG. In patients with chronic back pain syndrome, selected stretching therapy techniques improves the range of motion of the spine and reduces pain.

Practitioner-informed improvements to early childhood intervention performance checklists and practice guides

Directory of Open Access Journals (Sweden)

Carl J. Dunst

2017-08-01

Full Text Available Results from four early childhood practitioner field tests of performance checklists and early intervention practice guides are reported. Findings from the first field test were used to make changes and improvements in the checklists and practice guides evaluated in the second and third field tests, and findings from the latter two field tests were used to improve the checklist and practice guide evaluated in the fourth field test. Results indicated that changes made in response to practitioners’ suggestions and feedback were associated with (1 progressive increases in the practitioners’ social validity judgments of the checklists, practice guides, and checklist-practice guide correspondence, and (2 progressive decreases in the number of practitioner suggestions and feedback for improving the early intervention materials. The field-test research demonstrates the importance of practitioner input, suggestions, and feedback for improving the usefulness of early childhood intervention practices.

Strategies and arguments of ergonomic design for sustainability.

Science.gov (United States)

Marano, Antonio; Di Bucchianico, Giuseppe; Rossi, Emilio

2012-01-01

Referring to the discussion recently promoted by the Sub-Technical Committee n°4 "Ergonomics and design for sustainability", in this paper will be shown the early results of a theoretical and methodological study on Ergonomic design for sustainability. In particular, the research is based on the comparison between the common thematic structure characterizing Ergonomics, with the principles of Sustainable Development and with criteria adopted from other disciplines already oriented toward Sustainability. The paper identifies an early logical-interpretative model and describes possible and relevant Strategies of Ergonomic design for sustainability, which are connected in a series of specific Sustainable Arguments.

Audit of an automated checklist for quality control of radiotherapy treatment plans

International Nuclear Information System (INIS)

Breen, Stephen L.; Zhang Beibei

2010-01-01

Purpose: To assess the effect of adding an automated checklist to the treatment planning process for head and neck intensity-modulated radiotherapy. Methods: Plans produced within our treatment planning system were evaluated at the planners' discretion with an automated checklist of more than twenty planning parameters. Plans were rated as accepted or rejected for treatment, during regular review by radiation oncologists and physicists as part of our quality control program. The rates of errors and their types were characterised prior to the implementation of the checklist and with the checklist. Results: Without the checklist, 5.9% of plans were rejected; the use of the checklist reduced the rejection rate to 3.1%. The checklist was used for 64.7% of plans. Pareto analysis of the causes of rejection showed that the checklist reduced the number of causes of rejections from twelve to seven. Conclusions: The use of an automated checklist has reduced the need for reworking of treatment plans. With the use of the checklist, most rejections were due to errors in prescription or inadequate dose distributions. Use of the checklist by planners must be increased to maximise improvements in planning efficiency.

A Review of the Ergonomic Issues in the Laparoscopic Operating Room

Directory of Open Access Journals (Sweden)

Sang D. Choi

2012-01-01

Full Text Available This review paper discusses the ergonomic challenges associated with laparoscopy in the operating room (OR and summarizes the practical ergonomic solutions. The literature search was conducted in the fields of laparoscopy and applied ergonomics. Findings indicated that laparoscopic OR staff (surgeons, perioperative nurses and technicians commonly experienced physical and mental ergonomic risks while working in prolonged static and awkward body positions. This study highlighted the need for more ergonomic interventions in OR environment in order to improve the efficiency of laparoscopy. Ergonomic solutions included utilizing adjustable equipment, placing computer peripherals in optimal locations, providing ergonomic instruments, and improving communication. Understanding the job- or task-related ergonomic risks and hazards could help identify intervention requirements to meet the challenges associated with increased dependency on advanced high technology in the OR.

Ergonomic positioning or equipment for treating carpal tunnel syndrome.

Science.gov (United States)

O'Connor, Denise; Page, Matthew J; Marshall, Shawn C; Massy-Westropp, Nicola

2012-01-18

Non-surgical treatment, including ergonomic positioning or equipment, are sometimes offered to people experiencing mild to moderate symptoms from carpal tunnel syndrome (CTS). The effectiveness and duration of benefit from ergonomic positioning or equipment interventions for treating CTS are unknown. To assess the effects of ergonomic positioning or equipment compared with no treatment, a placebo or another non-surgical intervention in people with CTS. We searched the Cochrane Neuromuscular Disease Group Specialized Register (14 June 2011), the Cochrane Central Register of Controlled Trials (CENTRAL) (2011, Issue 2, in The Cochrane Library), MEDLINE (1966 to June 2011), EMBASE (1980 to June 2011), CINAHL Plus (1937 to June 2011), and AMED (1985 to June 2011). We also reviewed the reference lists of randomised or quasi-randomised trials identified from the electronic search. Randomised or quasi-randomised controlled trials comparing ergonomic positioning or equipment with no treatment, placebo or another non-surgical intervention in people with CTS. Two review authors independently selected trials for inclusion, extracted data and assessed risk of bias of included studies. We calculated risk ratios (RR) and mean differences (MD) with 95% confidence intervals (CI) for the primary and secondary outcomes. We pooled results of clinically and statistically homogeneous trials, where possible, to provide estimates of the effect of ergonomic positioning or equipment. We included two trials (105 participants) comparing ergonomic versus placebo keyboards. Neither trial assessed the primary outcome (short-term overall improvement) or adverse effects of interventions. In one small trial (25 participants) an ergonomic keyboard significantly reduced pain after 12 weeks (MD -2.40; 95% CI -4.45 to -0.35) but not six weeks (MD -0.20; 95% CI -1.51 to 1.11). In this same study, there was no difference between ergonomic and standard keyboards in hand function at six or 12 weeks or palm

Ergonomic measures in construction work: enhancing evidence-based implementation

NARCIS (Netherlands)

Visser, S.

2015-01-01

Despite the development and availability of ergonomic measures in the construction industry, the number of construction workers reporting high physical work demands remains high. A reduction of the high physical work demands can be achieved by using ergonomic measures. However, these ergonomic

Integrating ergonomic knowledge into engineering design processes

DEFF Research Database (Denmark)

Hall-Andersen, Lene Bjerg

Integrating ergonomic knowledge into engineering design processes has been shown to contribute to healthy and effective designs of workplaces. However, it is also well-recognized that, in practice, ergonomists often have difficulties gaining access to and impacting engineering design processes...... employed in the same company, constituted a supporting factor for the possibilities to integrate ergonomic knowledge into the engineering design processes. However, the integration activities remained discrete and only happened in some of the design projects. A major barrier was related to the business...... to the ergonomic ambitions of the clients. The ergonomists’ ability to navigate, act strategically, and compromise on ergonomic inputs is also important in relation to having an impact in the engineering design processes. Familiarity with the engineering design terminology and the setup of design projects seems...

'The perfect is the enemy of the good' - ergonomics research and practice. Institute of Ergonomics and Human Factors Annual Lecture 2010.

Science.gov (United States)

Buckle, Peter

2011-01-01

The relationship between research and practice in ergonomics and human factors has rarely been addressed in the literature. This presents specific problems for researchers when seeking to relate their work to the research community. Equally, practitioners are often frustrated by the lack of appropriate research to meet their needs. This paper seeks to identify current drivers for ergonomics research along with an analysis of how these are changing. Specifically, the use of bibliometric data to assess research output and its impact on a multi-disciplinary subject such as ergonomics is examined. Areas where action may be required to stimulate better research and improved practice are proposed. These include a greater role for the practitioner in completing the circle of knowledge and improving the evidence base for practice with, in particular, practitioners becoming more active in determining research priorities. It is concluded that combined effort is needed by researcher and practitioner communities to enable and promote a more effective understanding of the true impact of ergonomics across industry and society. STATEMENT OF RELEVANCE: The relationship between ergonomics research and practice is examined. Research 'drivers' are identified, including the influence of bibliometric data. Implications for researchers and practitioners are discussed. The role of practitioners in completing the circle of knowledge and improving the ergonomics evidence base is stressed, as is the need to promote the impact of ergonomics across society.

Ergonomic evaluation of interior design of Shoka vehicle and proposing recommendations for improvement.

Science.gov (United States)

Mazloumi, Adel; Mohammadreze, Fallah

2012-01-01

One of the applications of ergonomics disciplinary is designing driver workstation compatible to users' characteristics. The aim of this study was evaluation of interior design of Shoka vehicle with respect to the accommodation for Iranian population and proposing suggestions for customizing design of this vehicle. This study was a descriptive-analytical study conducted among thirty men from Iranian drivers population in 5, 50, 95 percentiles of the stature variable. Objective variables related to the occupant packaging and vehicle visual aspects including anthropometric variables, frontal, lateral, and side view and so on were investigated first. Then, subjective variables related to the driver mental workload and body comfort discomfort were studied using BMDMW and comfort questionnaires during 2-hour driving trial sessions. Occupant packaging variables and hand-arm angle showed the least accommodation percent (%53). Seating angles showed low accommodation as well (%73). Among three percentile groups there were no significant differences between the mean values of mental workload during two hours driving task. And, the mean value related to the comfort discomfort was 3.9 during driving sessions. Considering the findings in this study, it can be conclude that seating angles need correction and optimization. Taking mental workload results into account, it can be concluded that the interior design of the studied car had no influence on drivers' mental workload. From the aspect of comfort discomfort, Shoka vehicle showed neutral state among drivers. Optimizing seating angles, decreasing vibration, correcting stiffness of seating pan are suggested for customization of the ergonomics aspect of this vehicle.

An ergonomic task analysis of spinal anaesthesia.

LENUS (Irish Health Repository)

Ajmal, Muhammad

2009-12-01

Ergonomics is the study of physical interaction between humans and their working environment. The objective of this study was to characterize the performance of spinal anaesthesia in an acute hospital setting, applying ergonomic task analysis.

Following ergonomics guidelines decreases physical and cardiovascular workload during cleaning tasks.

Science.gov (United States)

Samani, Afshin; Holtermann, Andreas; Søgaard, Karen; Holtermann, Andreas; Madeleine, Pascal

2012-01-01

The aim was to investigate the effect of ergonomics guidelines on muscular activity, postural and cardiovascular load during cleaning. Eighteen cleaners performed 10 min of cleaning tasks in two locations; three min in a laboratory and seven min in a lecture room. All participants performed the task with or without focusing on ergonomics guidelines (ergonomics/non-ergonomics session). Bipolar surface electromyography was recorded bilaterally from upper trapezius and erector spinae muscles. A tri-axial accelerometer package was mounted on the low back (L5-S1) to measure postural changes, and the cardiovascular load was estimated by electrocardiogram. Ergonomics sessions resulted in lower muscular load, a more complex pattern of muscular activity, lower range of motion and angular velocity of the trunk as well as lower cardiovascular load compared with non-ergonomics sessions (p ergonomics guidelines during cleaning tasks. This study investigated the effects of following instructive ergonomics guidelines during cleaning tasks (daily curriculum of cleaning including mopping, sweeping, changing trash bins and cleaning of desks and blackboards). Following the ergonomics guidelines reduces the general workload and induces a more complex pattern of muscular activity. The study contributes with novel knowledge concerning ergonomics guidelines and work techniques.

Use of Ergonomic Measures Related to Musculoskeletal Complaints among Construction Workers: A 2-year Follow-up Study

NARCIS (Netherlands)

Boschman, Julitta S.; Frings-Dresen, Monique H. W.; van der Molen, Henk F.

2015-01-01

The physical work demands of construction work can be reduced using ergonomic measures. The aim of this study was to evaluate the use of ergonomic measures related to musculoskeletal disorders (MSDs) among construction workers. A questionnaire was sent at baseline and 2 years later to 1,130

An ergonomic evaluation of a call center performed by disabled agents.

Science.gov (United States)

Chi, Chia-Fen; Lin, Yen-Hui

2008-08-01

Potential ergonomic hazards for 27 disabled call center agents engaged in computer-telephone interactive tasks were evaluated for possible associations between the task behaviors and work-related disorders. Data included task description, 300 samples of performance, a questionnaire on workstation design, body-part discomfort rating, perceived stress, potential job stressors, and direct measurement of environmental factors. Analysis indicated agents were frequently exposed to prolonged static sitting and repetitive movements, together with unsupported back and flexed neck, causing musculoskeletal discomforts. Visual fatigue (85.2% of agents), discomfort of ears (66.7%), and musculoskeletal discomforts (59.3%) were the most pronounced and prevalent complaints after prolonged working. 17 of 27 agents described job pressure as high or very high, and dealing with difficult customers and trying to fulfill the customers' needs within the time standard were main stressors. Further work on surrounding noise, earphone use, possible hearing loss of experienced agents, training programs, feasible solutions for visual fatigue, musculoskeletal symptoms, and psychosocial stress should be conducted.

Can participatory ergonomics become 'the way we do things in this firm' - the Scandinavian approach to participatory ergonomics

DEFF Research Database (Denmark)

Jensen, Per Langaa

1997-01-01

Under the label 'participatory ergonomics' the idea of establishing changes in working conditions through participatory approaches has been a central issue within ergonomics. Tools and procedures have been developed and demonstrated beneficial. But how this approach can be established as the way...

A brief essay on ergonomics in graphic design.

Science.gov (United States)

Mendonça, André N F; van der Linden, Júlio C S; Fonseca, Tania M G

2012-01-01

Through Brazilian publication revision on the relations amongst Ergonomics and Design, we observed the tendency towards an approach focusing on product design. However, it is our duty to question which would be the influences of ergonomics in the graphic design. As a methodology, we considered the identification that the practices derived from ergonomics as epistemic system found in the main bibliography related to graphic design.

Checklists for external validity

DEFF Research Database (Denmark)

Dyrvig, Anne-Kirstine; Kidholm, Kristian; Gerke, Oke

2014-01-01

to an implementation setting. In this paper, currently available checklists on external validity are identified, assessed and used as a basis for proposing a new improved instrument. METHOD: A systematic literature review was carried out in Pubmed, Embase and Cinahl on English-language papers without time restrictions....... The retrieved checklist items were assessed for (i) the methodology used in primary literature, justifying inclusion of each item; and (ii) the number of times each item appeared in checklists. RESULTS: Fifteen papers were identified, presenting a total of 21 checklists for external validity, yielding a total...... of 38 checklist items. Empirical support was considered the most valid methodology for item inclusion. Assessment of methodological justification showed that none of the items were supported empirically. Other kinds of literature justified the inclusion of 22 of the items, and 17 items were included...

Removal of simulated biofilm: a preclinical ergonomic comparison of instruments and operators.

Science.gov (United States)

Graetz, Christian; Plaumann, Anna; Rauschenbach, Sebastian; Bielfeldt, Jule; Dörfer, Christof E; Schwendicke, Falk

2016-07-01

Periodontal scaling might cause musculoskeletal disorders, and scaling instruments might not only have different effectiveness and efficiency but also differ in their ergonomic properties. The present study assessed ergonomic working patterns of experienced (EO) and less experienced operators (LO) when using hand and powered devices for periodontal scaling and root planning. In an experimental study using periodontally affected manikins, sonic (AIR), ultrasonic (TIG) and hand instruments (GRA) were used by 11 operators (7 EO/4 LO) during simulated supportive periodontal therapy. Using an electronic motion monitoring system, we objectively assessed the working frequency and positioning of hand, neck and head. Operators' subjective evaluation of the instruments was recorded using a questionnaire. Hand instruments were used with the lowest frequency (2.57 ± 1.08 s(-1)) but greatest wrist deviation (59.57 ± 53.94°). EO used instruments more specifically than LO, and generally worked more ergonomically, with less inclination of head and neck in both the frontal and sagittal planes, especially when using hand instruments. All groups found hand instruments more tiring and difficult to use than powered instruments. Regardless of operators' experience, powered instruments were used more ergonomically and were subjectively preferred compared to hand instruments. The use of hand instruments has potential ergonomic disadvantages. However, with increasing experience, operators are able to recognise and mitigate possible risks.

Face and Convergent Validity of Persian Version of Rapid Office Strain Assessment (ROSA Checklist

Directory of Open Access Journals (Sweden)

Afrouz Armal

2016-01-01

Full Text Available Objective: The aim of this work was the translation, cultural adaptation and validation of the Persian version of the Rapid Office Stress Assessment (ROSA checklist. Material & Methods: This methodological study was conducted according of IQOLA method. 100 office worker were selected in order to carry out a psychometric evaluation of the ROSA checklist by performing validity (face and convergent analyses. The convergent validity was evaluated using RULA checklist. Results: Upon major changes made to the ROSA checklist during the translation/cultural adaptation process, face validity of the Persian version was obtained. Spearman correlation coefficient between total score of ROSA check list and RULA checklist was significant (r=0.76, p<0.0001. Conclusion: The results indicated that the translated version of the ROSA checklist is acceptable in terms of face validity, convergent validity in target society, and hence provides a useful instrument for assessing Iranian office workers

30 years of ergonomics at 3M: a case study.

Science.gov (United States)

Larson, N; Wick, H

2012-01-01

The added value of the Ergonomics Program at 3M was found to be improved employee safety, compliance with regulations and reduction of work-related illness, increases in productivity, and quality and operating efficiency. This paper describes the thirty years of existence of this program. For the first twenty years, the program objectives were to: respond to requests for assistance related to work-related musculoskeletal disorder (WMSD) concerns, raise employee awareness of MSDs and ergonomics; educate engineers in ergonomics design; and develop ergonomics teams at manufacturing locations. Since the year 2000, 3M's Ergonomics Program has been in transition from a US-centric and corporate-based technical-expertled program to a global program applying participatory ergonomics strategies within a macroergonomics framework. During that transition, the existing program requirements were revised, new methods and program tools were created, and expectations for implementation at the manufacturing locations clarified. This paper focuses on the company's manufacturing ergonomics program activities during the past ten years and includes specifics of the program's objectives, risk assessment reduction process, and ergonomics technical expertise development. The main benefit achieved throughout the company is reducing employee injury while also increasing productivity and operating efficiency.

Fundamentals of ergonomic exoskeleton robots

OpenAIRE

Schiele, A.

2008-01-01

This thesis is the first to provide the fundamentals of ergonomic exoskeleton design. The fundamental theory as well as technology necessary to analyze and develop ergonomic wearable robots interacting with humans is established and validated by experiments and prototypes. The fundamentals are (1) a new theoretical framework for analyzing physical human robot interaction (pHRI) with exoskeletons, and (2) a clear set of design rules of how to build wearable, portable exoskeletons to easily and...

Ergonomic Improvements for Foundries; FINAL

International Nuclear Information System (INIS)

Frank Peters; Patrick Patterson

2002-01-01

The goal of this project was to make improvements to the production systems of the steel casting industry through ergonomic improvements. Because of the wide variety of products, the wide range of product sizes, and the relatively small quantities of any particular product, manual operations remain a vital part of the production systems of the steel casting companies. Ergonomic improvements will assist the operators to more efficiently and consistently produce quality products

Avoid Workplace Injury through Ergonomics | Poster

Science.gov (United States)

Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases

Ergonomics, anthropometrics, and kinetic evaluation of gait: A case study

OpenAIRE

Lima, Rosa; Fontes, Liliana Magalhães Campos; Arezes, P.; Carvalho, Miguel

2015-01-01

This study aimed to develop appropriate changes in a pair of shoes in order to improve the gait of an individual selected for this case study. This analysis took into account ergonomic aspects, namely those relating to the individual’s anthropometrics. Gait analysis was done with the adapted footwear both before and after intervention.A conventional X-ray was performed, which revealed a 29-mm left lower limb shortening and possible foot adduction. The anthropometric assessment confir...

Study on functional relationships between ergonomics indexes of manual performance

Science.gov (United States)

Hu, Hui-Min; Ding, Li; Chen, Shou-Ping; Yang, Chun-Xin; Yuan, Xiu-Gan

This paper investigates functional relationships between some of the key ergonomics indexes in manual performance, and attempts to condense the ergonomics appraisal indexes system and thus evaluate hand performance wearing EVA (extravehicular activity) glove, design and improve EVA glove's performance. Four types of ergonomics indexes were studied, i.e., dexterity, tactile sensibility (TS), strength and fatigue. Two test items of insert sticks into a holes-board (ISIHB) and nuts-bolts assembly task (NBAT) were used to measure dexterity, while shape discrimination (SD) was employed for TS, and grip force (GF) for strength and fatigue. The variables measured in this investigation included accomplishing time (AT) of ISIHB and NBAT, correct rate (CR) of SD, maximal grip force (MGF), instant grip force (IGF) and endurance time of grip force (ETGF). Experiments were conducted on 31 undergraduates (eight female and 23 male) with two experiment conditions of bare-hand group and gloved hand group. Results demonstrated that dexterity and TS performance of gloved hand group declined significantly compared with those of bare-hand group (pfatigue between two conditions (p>0.05). Four effective functional relationships were developed between four pairs of ergonomics indexes in bare-hand group. In gloved hand group, in addition to above-mentioned four pairs of relationships, another formula was found, which was y^=0.02061+0.01233x ( p<0.01, dexterity and TS).

Reduction of work-related musculoskeletal risk factors following ergonomics education of sewing machine operators.

Science.gov (United States)

Bulduk, Sıdıka; Bulduk, Emre Özgür; Süren, Tufan

2017-09-01

Work-related musculoskeletal disorders (WMSDs) are a major hazard for sewing machine operators. Ergonomics education is recommended for reducing musculoskeletal disorders at workstations. This study aimed to evaluate the effect of an ergonomics education in reducing the exposure to risk factors for WMSDs among sewing machine operators. In this study of 278 workers, their exposure to the risk of WMSDs was assessed using the quick exposure check scale prior to them attending an ergonomics education programme and then again 3 months after the programme. The scores for risk exposure before the education programme were moderate for back (static) and back (dynamic), high for shoulder/arm and very high for wrist/hand and neck. The results obtained 3 months later were low for back (static) and shoulder/arm, and moderate for back (dynamic), wrist/hand and neck. Based on our results, ergonomics education can reduce the exposure to risk factors for WMSDs in the workplace.

Guidance for Modifying the Definition of Diseases: A Checklist.

Science.gov (United States)

Doust, Jenny; Vandvik, Per O; Qaseem, Amir; Mustafa, Reem A; Horvath, Andrea R; Frances, Allen; Al-Ansary, Lubna; Bossuyt, Patrick; Ward, Robyn L; Kopp, Ina; Gollogly, Laragh; Schunemann, Holger; Glasziou, Paul

2017-07-01

No guidelines exist currently for guideline panels and others considering changes to disease definitions. Panels frequently widen disease definitions, increasing the proportion of the population labeled as unwell and potentially causing harm to patients. We set out to develop a checklist of issues, with guidance, for panels to consider prior to modifying a disease definition. We assembled a multidisciplinary, multicontinent working group of 13 members, including members from the Guidelines International Network, Grading of Recommendations Assessment, Development and Evaluation working group, and the World Health Organisation. We used a 5-step process to develop the checklist: (1) a literature review of issues, (2) a draft outline document, (3) a Delphi process of feedback on the list of issues, (4) a 1-day face-to-face meeting, and (5) further refinement of the checklist. The literature review identified 12 potential issues. From these, the group developed an 8-item checklist that consisted of definition changes, number of people affected, trigger, prognostic ability, disease definition precision and accuracy, potential benefits, potential harms, and the balance between potential harms and benefits. The checklist is accompanied by an explanation of each item and the types of evidence to assess each one. We used a panel's recent consideration of a proposed change in the definition of gestational diabetes mellitus (GDM) to illustrate use of the checklist. We propose that the checklist be piloted and validated by groups developing new guidelines. We anticipate that the use of the checklist will be a first step to guidance and better documentation of definition changes prior to introducing modified disease definitions.

BASS 4: a software system for ergonomic design and evaluation of working hours

Directory of Open Access Journals (Sweden)

Carsten Schomann

2004-12-01

Full Text Available OBJECTIVE: To extend an existing computer programme for the evaluation and design of shift schedules (BASS 3 by integrating workload as well as economic aspects. METHODS: The redesigned prototype BASS 4 includes a new module with a suitable and easily applicable screening method (EBA for the assessment of the intensity of physical, emotional and cognitive workload components and their temporal patterns. Specified criterion functions based on these ratings allow for an adjustment of shift and rest duration according to the intensity of physical and mental workload. Furthermore, with regard to interactive effects both workload and temporal conditions, e.g. time of day, are taken into account. In a second new module, important economic aspects and criteria have been implemented. Different ergonomic solutions for scheduling problems can now also be evaluated with regard to their economic costs. RESULTS: The new version of the computer programme (BASS 4 can now simultaneously take into account numerous ergonomic, legal, agreed and economic criteria for the design and evaluation of working hours. CONCLUSIONS: BASS 4 can now be used as an instrument for the design and the evaluation of working hours with regard to legal, ergonomic and economic aspects at the shop floor as well as in administrative (e.g. health and safety inspection and research problems.OBJETIVOS: Expandir um programa computacional existente para planejamento e avaliação dos horários de turnos (BASS 3 por meio da incorporação da carga de trabalho e características econômicas. MÉTODOS: O protótipo BASS 4 contém um novo módulo com um método de triagem (EBA conveniente e de fácil aplicação para a avaliação da intensidade dos componentes físico, emocional e cognitivo da carga de trabalho e seus padrões temporais. O uso de critérios específicos com base nestas avaliações possibilita ajustar a duração do turno e do descanso de acordo com a intensidade da carga de

Validation of ergonomic instructions in robot-assisted surgery simulator training.

Science.gov (United States)

Van't Hullenaar, C D P; Mertens, A C; Ruurda, J P; Broeders, I A M J

2018-05-01

Training in robot-assisted surgery focusses mainly on technical skills and instrument use. Training in optimal ergonomics during robotic surgery is often lacking, while improved ergonomics can be one of the key advantages of robot-assisted surgery. Therefore, the aim of this study was to assess whether a brief explanation on ergonomics of the console can improve body posture and performance. A comparative study was performed with 26 surgical interns and residents using the da Vinci skills simulator (Intuitive Surgical, Sunnyvale, CA). The intervention group received a compact instruction on ergonomic settings and coaching on clutch usage, while the control group received standard instructions for usage of the system. Participants performed two sets of five exercises. Analysis was performed on ergonomic score (RULA) and performance scores provided by the simulator. Mental and physical load scores (NASA-TLX and LED score) were also registered. The intervention group performed better in the clutch-oriented exercises, displaying less unnecessary movement and smaller deviation from the neutral position of the hands. The intervention group also scored significantly better on the RULA ergonomic score in both the exercises. No differences in overall performance scores and subjective scores were detected. The benefits of a brief instruction on ergonomics for novices are clear in this study. A single session of coaching and instruction leads to better ergonomic scores. The control group showed often inadequate ergonomic scores. No significant differences were found regarding physical discomfort, mental task load and overall performance scores.

New procedures of ergonomics design in a large oil company.

Science.gov (United States)

Alhadeff, Cynthia Mossé; Silva, Rosana Fernandes da; Reis, Márcia Sales dos

2012-01-01

This study presents the challenge involved in the negotiation and construction of a standard process in a major petroleum company that has the purpose of guiding the implementation of ergonomic studies in the development of projects, systemising the implementation of ergonomics design. The standard was created by a multi-disciplinary working group consisting of specialists in ergonomics, who work in a number of different areas of the company. The objective was to guide "how to" undertake ergonomics in all projects, taking into consideration the development of the ergonomic appraisals of work. It also established that all the process, in each project phase, should be accompanied by a specialist in ergonomics. This process as an innovation in the conception of projects in this company, signals a change of culture, and, for this reason requires broad dissemination throughout the several company leadership levels, and training of professionals in projects of ergonomics design. An implementation plan was also prepared and approved by the corporate governance, complementing the proposed challenge. In this way, this major oil company will implement new procedures of ergonomics design to promote health, safety, and wellbeing of the workforce, besides improving the performance and reliability of its systems and processes.

Effects of ergonomic intervention on work-related upper extremity musculoskeletal disorders among computer workers: a randomized controlled trial.

Science.gov (United States)

Esmaeilzadeh, Sina; Ozcan, Emel; Capan, Nalan

2014-01-01

The aim of the study was to determine effects of ergonomic intervention on work-related upper extremity musculoskeletal disorders (WUEMSDs) among computer workers. Four hundred computer workers answered a questionnaire on work-related upper extremity musculoskeletal symptoms (WUEMSS). Ninety-four subjects with WUEMSS using computers at least 3 h a day participated in a prospective, randomized controlled 6-month intervention. Body posture and workstation layouts were assessed by the Ergonomic Questionnaire. We used the Visual Analogue Scale to assess the intensity of WUEMSS. The Upper Extremity Function Scale was used to evaluate functional limitations at the neck and upper extremities. Health-related quality of life was assessed with the Short Form-36. After baseline assessment, those in the intervention group participated in a multicomponent ergonomic intervention program including a comprehensive ergonomic training consisting of two interactive sessions, an ergonomic training brochure, and workplace visits with workstation adjustments. Follow-up assessment was conducted after 6 months. In the intervention group, body posture (p 0.05). Ergonomic intervention programs may be effective in reducing ergonomic risk factors among computer workers and consequently in the secondary prevention of WUEMSDs.

Ergonomics and sustainability: towards an embrace of complexity and emergence.

Science.gov (United States)

Dekker, Sidney W A; Hancock, Peter A; Wilkin, Peter

2013-01-01

Technology offers a promising route to a sustainable future, and ergonomics can serve a vital role. The argument of this article is that the lasting success of sustainability initiatives in ergonomics hinges on an examination of ergonomics' own epistemology and ethics. The epistemology of ergonomics is fundamentally empiricist and positivist. This places practical constraints on its ability to address important issues such as sustainability, emergence and complexity. The implicit ethical position of ergonomics is one of neutrality, and its positivist epistemology generally puts value-laden questions outside the parameters of what it sees as scientific practice. We argue, by contrast, that a discipline that deals with both technology and human beings cannot avoid engaging with questions of complexity and emergence and seeking innovative ways of addressing these issues. Ergonomics has largely modelled its research on a reductive science, studying parts and problems to fix. In sustainability efforts, this can lead to mere local adaptations with a negative effect on global sustainability. Ergonomics must consider quality of life globally, appreciating complexity and emergent effects of local relationships.

ERGONOMIC ASPECTS IN THE PLANNING AND EXECUTION OF PROJECTS: A TEXTILE PRODUCTS DISTRIBUTION CENTER PROJECT CASE STUDY

Directory of Open Access Journals (Sweden)

Emerson Lourenço da Silva

2013-01-01

Full Text Available The planning and execution phases of a distribution center project of a large textile industry was made, evaluating the ergonomic aspects related to the operations to be performed in the facility and staff anthropometric data. The ergonomic collaborative analysis of the tasks associated with the method of movement plotting, guided the planning of the picking, manual induction and order consolidation areas from the distribution center. Using this methodology, it was possible to obtain a proper ergonomically project planning and execution of the three studied areas.

Ergonomics SA

African Journals Online (AJOL)

Journal Homepage Image. Ergonomics SA (esa) provides a medium for publication of material relevant to occupational conditions and needs in Southern Africa at a time of change unparalleled in history. To this end the journal accepts articles in the following categories: research papers, review articles, conceptual theories, ...

Physical ergonomics

NARCIS (Netherlands)

Looze, M.P. de; Koningsveld, E.

2013-01-01

Physical ergonomics deals with the physical load on the human body when performing activities like work, sports, jobs at home or dealing with products. With regard to the exposure to physical loads and its potential effects on the human body, the presented framework is helpful. In this article we

Ergon-trial: ergonomic evaluation of single-port access versus three-port access video-assisted thoracic surgery.

Science.gov (United States)

Bertolaccini, Luca; Viti, Andrea; Terzi, Alberto

2015-10-01

Single-port access video-assisted thoracic surgery (VATS), a technique progressively developed from the standard three-port approach in minimally invasive surgery, offers ergonomic advantages but also new challenges for the surgeon. We compared the ergonomics of three-port versus single-port VATS. Posture analysis of surgeons was evaluated during 100 consecutive VATS wedge resections (50 triportal vs. 50 uniportal). Technically demanding procedures (major lung resection) were excluded. Operating table height, monitor height, distance and inclination were adjusted according to operator preference. Body posture was assessed by measuring head-trunk axial rotation and head flexion. Perceived physical strain was self-evaluated on the Borg Category Ratio (CR-10) scale. Mental workload was assessed with the National Aeronautics Space Administration-Task Load indeX (NASA-TLX), a multidimensional tool that rates workloads on six scales (mental, physical and temporal demand; effort; performance; frustration). All procedures were completed without complications. Head-trunk axial rotation was significantly reduced and neck flexion significantly improved in uniportal VATS. Viewing direction significantly declined (p = 0.01), body posture as measured on the Borg CR-10 scale was perceived as more stressful and the NASA-TLX score for overall workload was higher (p = 0.04) during triportal VATS. The NASA-TLX score for frustration was higher with uniportal VATS (p = 0.02), but the score for physical demand was higher in triportal VATS (p = 0.006). The surgeon can maintain a more neutral body posture during uniportal VATS by standing straight and facing the monitor with only minimal neck extension/rotation; however, frustration is greater than with triportal VATS.

The Influence of Ergonomic Training on Low Back and Neck Pains in Female Hospital Personnel

Directory of Open Access Journals (Sweden)

Saeidi

2014-07-01

Full Text Available Background Prevalence of low back pain (LBP and neck pain (NP in workers, especially in nurses is high, but their knowledge of ergonomics is not enough. Objectives The aim of this study was to evaluate the impact of ergonomic training on low back pain and neck pain, posture, and function in female hospital personnel of Najaf-Abad, Iran. Patients and Methods In this queasy experimental study, 47 female staffs with LBP or NP were selected through a simple consecutive sampling method. The subjects completed a questionnaire on LBP and NP and were evaluated for posture, back tests, and cost of related treatments. Afterward, they participated in an ergonomic training program, including face to face and group education sessions on ergonomic risk factors for LBP and NP, in the work place. After six months of follow up, all the tests and data collection were repeated and data was analyzed using paired t-test and regression analysis. Results Prevalence of LBP and NP were 87% and 45.7%, respectively. Repetitive motions were the most frequent cause of pain (67%. Pain intensity, posture, risk of musculoskeletal disorders, weight, waist circumference, sick leaves, and the costs of treatments reduced significantly after intervention (P < 0.05. Conclusions With regards to the influence of ergonomic training on improving LBP and NP and decreasing the treatment costs, this intervention beside others can be useful for controlling musculoskeletal disorders in hospital personnel.

Ergonomics SA: Contact

African Journals Online (AJOL)

Principal Contact. Mrs June McDougall. Rhodes University. Department of Human Kinetics and Ergonomics. P.O. Box 94. Rhodes University. Grahamstown. 6140. Phone: +27 46 6038471. Email: j.mcdougall@ru.ac.za ...

Ergonomic evaluation of the environment: a case study in a control room of the hydroelectric sector.

Science.gov (United States)

Falcão, Christianne Soares; Soares, Marcelo Marcio

2012-01-01

Representative systematic evaluation studies of the workspace and the extent to which that space is suitable for performing tasks have been developed by professionals engaged on finding evidence as to the importance of users and designers being joint participants in drawing up projects. In this context, this paper sets out to evaluate the environment of a control room in the hydroelectric sector, based on a multidisciplinary method which integrates ergonomics, architecture and environmental psychology so as to assess the influence of space on the user, and thus to identify the user's level of satisfaction with it. It was observed that some adaptation strategies of the space for activities were not implemented satisfactorily, resulting in the need for further studies on making workspaces suitable.

Ergonomics: A bridge between fundamentals and applied research

OpenAIRE

Ghosh, Subrata; Bagchi, Anandi; Sen, Devashish; Bandyopadhyay, Pathikrit

2011-01-01

Ergonomics is becoming a subject of applying fundamentals on anthropocentric dimensions for holistic welfare. The so-called conflict between Basic science and Applied research finds one of its edges in Ergonomics. Be it cutting-edge technology or frontiers of scientific innovation-all start from understanding basic scientific aptitude and skill, and the best way to get familiar with the situation is practicing basic science again and again at a regular basis. Ergonomics is diversified in such...

Evaluation of the musculoskeletal disorders by ART technique and implementation of ergonomics intervention programs in a manufacturing company

Directory of Open Access Journals (Sweden)

javad torkaman

2015-06-01

Full Text Available Background & Objectives : Currently, work-related musculoskeletal disorders are a major occupational health concern. This study tried to evaluate the risk factors of musculoskeletal disorders by the assessment of repetitive tasks (ART. It also sought to determine the effects of an ergonomic intervention on the mentioned risk in a manufacturing company . Methods: In this study, 60 production line workers were randomly selected. The data was collected by using a demographic questionnaire and the ART. The intervention was implemented for 39 cases. Data were analyzed in SPSS. Results: The initial evaluations suggested low, moderate, and high levels of risk in 21.7, 48.3, and 30.0 of the participants, respectively. Re-assessments after the intervention showed that the frequency of low-risk individuals increased from 30.70 before the intervention to 53.85 after the intervention. On the other hand, comparisons between the rates before and after the intervention revealed reductions in the frequency of moderate risk (64.10 vs. 43.59 and high risk (5.2 vs. 2.56. These changes were all significant. Conclusion: In most cases, the initial ergonomic risks were not at an acceptable level. In fact, most workers were at moderate level of risk. Since many workers in the assembling industry suffer from musculoskeletal disorders, low-cost eengineering and management measures can be taken to reduce the level of risk .

Ergonomics in the office environment

Science.gov (United States)

Courtney, Theodore K.

1993-01-01

Perhaps the four most popular 'ergonomic' office culprits are: (1) the computer or visual display terminal (VDT); (2) the office chair; (3) the workstation; and (4) other automated equipment such as the facsimile machine, photocopier, etc. Among the ergonomics issues in the office environment are visual fatigue, musculoskeletal disorders, and radiation/electromagnetic (VLF,ELF) field exposure from VDT's. We address each of these in turn and then review some regulatory considerations regarding such stressors in the office and general industrial environment.

Cost-effectiveness of ergonomic interventions in production

NARCIS (Netherlands)

Looze, M.P. de; Koningsveld, E.P.A.; Fritzsche, L.; O'Sullivan, L.; Levizzari, A.

2008-01-01

Ergonomic measures to reduce or eliminate the risks for developing musculoskeletal disorders, usually affects the performance at work as well, e.g. productivity or quality. The costs and benefits that can be associated with ergonomic measures are highly diverse in nature. Prior to investing in any

Ergonomics in the context of system safety

International Nuclear Information System (INIS)

Donnelly, K.E.

1984-01-01

In a complex industrial environment, ergonomics must be combined with management science and systems analysis to produce a program which can create effective change and improve safety performance. We give an overview of such an approach, namely System Safety, so that its ergonomic content may be seen

Office ergonomics: deficiencies in computer workstation design.

Science.gov (United States)

Shikdar, Ashraf A; Al-Kindi, Mahmoud A

2007-01-01

The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.

Finding ergonomic solutions--participatory approaches.

Science.gov (United States)

Hignett, Sue; Wilson, John R; Morris, Wendy

2005-05-01

This paper gives an overview of the theory of participatory ergonomics interventions and summary examples from a range of industries, including health care, military, manufacturing, production and processing, services, construction and transport. The definition of participatory approaches includes interventions at macro (organizational, systems) levels as well as micro (individual), where workers are given the opportunity and power to use their knowledge to address ergonomic problems relating to their own working activities. Examples are given where a cost-effective benefit has been measured using musculoskeletal sickness absence and compensation costs. Other examples, using different outcome measures, also showed improvements, for example, an increase in productivity, improved communication between staff and management, reduction in risk factors, the development of new processes and new designs for work environments and activities. Three cases are described from Canada and Japan where the participatory project was led by occupational health teams, suggesting that occupational health practitioners can have an important role to play in participatory ergonomics projects.

Participatory ergonomics intervention in an industrially developing country--a case study.

Science.gov (United States)

Helali, Faramarz; Lönnroth, Emma-Christin; Shahnavaz, Houshang

2008-01-01

In industrially developing countries, a few ergonomists have directed great efforts towards developing ergonomics awareness among managers and workers in organizations. There is little research on the degree of their success, though. Furthermore, access of organizations to ergonomics knowledge is usually very difficult, especially in industrially developing countries. Thus, building ergonomics awareness is certainly the first phase of the process. Three companies from one industry (44 people: 14 females and 30 males) participated in a project aimed at improving their work system. At the beginning, we needed to create a common goal and ensure participation with appropriate ergonomics tools. The findings of this study were the key issue for the ergonomics intervention (i.e., a shared vision, awakened need of change and learning). Further, to build ergonomics awareness and develop a continuous learning process in the company, it was necessary to use more ergonomics tools through workers' participation in different workplaces.

[Evaluation of the quality of clinical practice guidelines published in the Annales de Biologie Clinique with the help of the EFLM checklist].

Science.gov (United States)

Wils, Julien; Fonfrède, Michèle; Augereau, Christine; Watine, Joseph

2014-01-01

Several tools are available to help evaluate the quality of clinical practice guidelines (CPG). The AGREE instrument (Appraisal of guidelines for research & evaluation) is the most consensual tool but it has been designed to assess CPG methodology only. The European federation of laboratory medicine (EFLM) recently designed a check-list dedicated to laboratory medicine which is supposed to be comprehensive and which therefore makes it possible to evaluate more thoroughly the quality of CPG in laboratory medicine. In the present work we test the comprehensiveness of this check-list on a sample of CPG written in French and published in Annales de biologie clinique (ABC). Thus we show that some work remains to be achieved before a truly comprehensive check-list is designed. We also show that there is some room for improvement for the CPG published in ABC, for example regarding the fact that some of these CPG do not provide any information about allowed durations of transport and of storage of biological samples before analysis, or about standards of minimal analytical performance, or about the sensitivities or the specificities of the recommended tests.

The Influence of Ergonomics Training on Employee Behavior at Los Alamos National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Puckett, Leslie Guthrie [Colorado State Univ., Fort Collins, CO (United States)

2001-01-01

A survey of employee behavior was conducted at Los Alamos National Laboratory (LANL). The objective of this study was to evaluate the prevalence of ergonomic behavior that decreased the chance of having a work-related musculoskeletal disorder (WMSD) among employees. The null hypothesis was tested to determine if there was a significant difference in ergonomic behavior between trained and untrained employees. The LANL employees were stratified by job series and then randomly selected to participate. The data were gathered using an electronic self-administered behavior questionnaire. The study population was composed of 6931 employees, and the response rate was 48%. The null hypothesis was rejected for twelve out of fifteen questions on the questionnaire. Logistic regression results indicate that the trained participants were more likely to report the risk-avoiding behavior, which supported the rejection of the null hypothesis for 60% of the questions. There was a higher frequency that the beneficial or risk-avoiding behavior was reported by the uninjured participants. Job series analysis revealed that ergonomics is an important issue among participants from all the job series. It also identified the occupational specialist classification (an administrative job), as the job series with the most occurrences of undesired ergonomic behaviors. In conclusion, there was a significant difference between the trained and untrained participants of the beneficial ergonomic behavior in the reported risk reducing behaviors.

Is a participatory approach effective to stimulate using ergonomic measures?

NARCIS (Netherlands)

Molen, H.F. van der; Sluiter, J.K.; Hulshof, C.T.J.; Vink, P.; Duivenbooden, J.C. van; Holman, R.; Frings-Dresen, M.H.W.

2006-01-01

The objective of this study was to examine the effect of a participatory ergonomics (PE) implementation strategy on the use of ergonomic measures reducing the physical work demands of construction work. The ergonomic measures consisted of adjusting working height (two measures) and mechanising the

Optimization of healthcare supply chain in context of macro-ergonomics factors by a unique mathematical programming approach.

Science.gov (United States)

Azadeh, A; Motevali Haghighi, S; Gaeini, Z; Shabanpour, N

2016-07-01

This study presents an integrated approach for analyzing the impact of macro-ergonomics factors in healthcare supply chain (HCSC) by data envelopment analysis (DEA). The case of this study is the supply chain (SC) of a real hospital. Thus, healthcare standards and macro-ergonomics factors are considered to be modeled by the mathematical programming approach. Over 28 subsidiary SC divisions with parallel missions and objectives are evaluated by analyzing inputs and outputs through DEA. Each division in this HCSC is considered as decision making unit (DMU). This approach can analyze the impact of macro-ergonomics factors on supply chain management (SCM) in healthcare sector. Also, this method ranks the relevant performance efficiencies of each HCSC. In this study by using proposed method, the most effective macro-ergonomics factor on HCSC is identified as "teamwork" issue. Also, this study would help managers to identify the areas of weaknesses in their SCM system and set improvement target plan for the related SCM system in healthcare industry. To the best of our knowledge, this is the first study for macro-ergonomics optimization of HCSC. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Psychometric properties evaluation of a new ergonomics-related job factors questionnaire developed for nursing workers.

Science.gov (United States)

Coluci, Marina Zambon Orpinelli; Alexandre, Neusa Maria Costa

2014-11-01

The objectives of this study were to develop a questionnaire that evaluates the perception of nursing workers to job factors that may contribute to musculoskeletal symptoms, and to evaluate its psychometric properties. Internationally recommended methodology was followed: construction of domains, items and the instrument as a whole, content validity, and pre-test. Psychometric properties were evaluated among 370 nursing workers. Construct validity was analyzed by the factorial analysis, known-groups technique, and convergent validity. Reliability was assessed through internal consistency and stability. Results indicated satisfactory fit indices during confirmatory factor analysis, significant difference (p office workers, and moderate correlations between the new questionnaire and Numeric Pain Scale, SF-36 and WRFQ. Cronbach's alpha was close to 0.90 and ICC values ranged from 0.64 to 0.76. Therefore, results indicated that the new questionnaire had good psychometric properties for use in studies involving nursing workers. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

An ergonomic study on the biomechanical consequences in children, generated by the use of computers at school.

Science.gov (United States)

Paraizo, Claudia; de Moraes, Anamaria

2012-01-01

This research deals with the influence of the computer use in schools related to the children posture, in an ergonomic point of view. The research tries to identify probable causes for the children early postural constraints, relating it to the sedentary behavior and the lack of an ergonomic project in schools. The survey involved 186 children, between 8 and 12 years old, students of a private school in Rio de Janeiro-Brasil. An historical and theoretical school furniture research was conducted as well as a survey with the students and teachers, computer postural evaluation, ergonomic evaluation (RULA method), and observations in the computer classroom. The research dealt with the student's perception with respect to the furniture utilized by him in the classroom during the use of the computer, his body complaint, the time he spent working on the school computer and the possibility of the existence of sedentariness. Also deals with the teachers' perception and knowledge regarding ergonomics with reference to schoolroom furniture and its Regulatory Norms (RN). The purpose of the research work is to highlight the importance of this knowledge, having in view the possibility of the teachers' collaboration in the ergonomic adaptation of the classroom environment and in their conscientious opinion during the purchasing of this furniture. A questionnaire was utilized and its results showed some discontent on the part of the teachers with relation to the schoolroom furniture as well as the teachers' scant knowledge of Ergonomics.We conclude with a survey that despite the children had constraints in postural assessments and school furniture needs a major ergonomic action, the time that children use the computer at school is small compared with the time of use at home and therefore insufficient to be the main cause of quantified commitments, thus the study of computer use at home as a development and continuity of this research.

"Alarm-corrected" ergonomic armrest use could improve learning curves of novices on robotic simulator.

Science.gov (United States)

Yang, Kun; Perez, Manuela; Hossu, Gabriela; Hubert, Nicolas; Perrenot, Cyril; Hubert, Jacques

2017-01-01

In robotic surgery, the professional ergonomic habit of using an armrest reduces operator fatigue and increases the precision of motion. We designed and validated a pressure surveillance system (PSS) based on force sensors to investigate armrest use. The objective was to evaluate whether adding an alarm to the PSS system could shorten ergonomic training and improve performance. Twenty robot and simulator-naïve participants were recruited and randomized in two groups (A and B). The PSS was installed on a robotic simulator, the dV-Trainer, to detect contact with the armrest. The Group A members completed three tasks on the dV-Trainer without the alarm, making 15 attempts at each task. The Group B members practiced the first two tasks with the alarm and then completed the final tasks without the alarm. The simulator provided an overall score reflecting the trainees' performance. We used the new concept of an "armrest load" score to describe the ergonomic habit of using the armrest. Group B had a significantly higher performance score (p ergonomic errors and accelerated professional ergonomic habit acquisition. The combination of the PSS and alarm is effective in significantly shortening the learning curve in the robotic training process.

Elementary Ergonomics

Science.gov (United States)

Grayson, Jennifer

2009-01-01

What's the number 1 threat to young students using computers today? According to Dan Odell, Microsoft's in-house ergonomist, when he asked parents this very question, "the things they were most concerned about were online predators and people taking advantage of their kids. Ergonomics was fairly far down the list." Unfortunately, that…

Ergonomic office design and aging: a quasi-experimental field study of employee reactions to an ergonomics intervention program.

Science.gov (United States)

May, Douglas R; Reed, Kendra; Schwoerer, Catherine E; Potter, Paul

2004-04-01

A naturally occurring quasi-experimental longitudinal field study of 87 municipal employees using pretest and posttest measures investigated the effects of an office workstation ergonomics intervention program on employees' perceptions of their workstation characteristics, levels of persistent pain, eyestrain, and workstation satisfaction. The study examined whether reactions differed between younger and older employees. Results revealed that workstation improvements were associated with enhanced perceptions of the workstation's ergonomic qualities, less upper back pain, and greater workstation satisfaction. Among those experiencing an improvement, the perceptions of workstation ergonomic qualities increased more for younger than older employees, supporting the "impressionable years" framework in the psychological literature on aging. Implications for human resources managers are discussed.

Fitting methods to paradigms: are ergonomics methods fit for systems thinking?

Science.gov (United States)

Salmon, Paul M; Walker, Guy H; M Read, Gemma J; Goode, Natassia; Stanton, Neville A

2017-02-01

The issues being tackled within ergonomics problem spaces are shifting. Although existing paradigms appear relevant for modern day systems, it is worth questioning whether our methods are. This paper asks whether the complexities of systems thinking, a currently ubiquitous ergonomics paradigm, are outpacing the capabilities of our methodological toolkit. This is achieved through examining the contemporary ergonomics problem space and the extent to which ergonomics methods can meet the challenges posed. Specifically, five key areas within the ergonomics paradigm of systems thinking are focused on: normal performance as a cause of accidents, accident prediction, system migration, systems concepts and ergonomics in design. The methods available for pursuing each line of inquiry are discussed, along with their ability to respond to key requirements. In doing so, a series of new methodological requirements and capabilities are identified. It is argued that further methodological development is required to provide researchers and practitioners with appropriate tools to explore both contemporary and future problems. Practitioner Summary: Ergonomics methods are the cornerstone of our discipline. This paper examines whether our current methodological toolkit is fit for purpose given the changing nature of ergonomics problems. The findings provide key research and practice requirements for methodological development.

Guidelines 2.0: systematic development of a comprehensive checklist for a successful guideline enterprise

Science.gov (United States)

Schünemann, Holger J.; Wiercioch, Wojtek; Etxeandia, Itziar; Falavigna, Maicon; Santesso, Nancy; Mustafa, Reem; Ventresca, Matthew; Brignardello-Petersen, Romina; Laisaar, Kaja-Triin; Kowalski, Sérgio; Baldeh, Tejan; Zhang, Yuan; Raid, Ulla; Neumann, Ignacio; Norris, Susan L.; Thornton, Judith; Harbour, Robin; Treweek, Shaun; Guyatt, Gordon; Alonso-Coello, Pablo; Reinap, Marge; Brožek, Jan; Oxman, Andrew; Akl, Elie A.

2014-01-01

Background: Although several tools to evaluate the credibility of health care guidelines exist, guidance on practical steps for developing guidelines is lacking. We systematically compiled a comprehensive checklist of items linked to relevant resources and tools that guideline developers could consider, without the expectation that every guideline would address each item. Methods: We searched data sources, including manuals of international guideline developers, literature on guidelines for guidelines (with a focus on methodology reports from international and national agencies, and professional societies) and recent articles providing systematic guidance. We reviewed these sources in duplicate, extracted items for the checklist using a sensitive approach and developed overarching topics relevant to guidelines. In an iterative process, we reviewed items for duplication and omissions and involved experts in guideline development for revisions and suggestions for items to be added. Results: We developed a checklist with 18 topics and 146 items and a webpage to facilitate its use by guideline developers. The topics and included items cover all stages of the guideline enterprise, from the planning and formulation of guidelines, to their implementation and evaluation. The final checklist includes links to training materials as well as resources with suggested methodology for applying the items. Interpretation: The checklist will serve as a resource for guideline developers. Consideration of items on the checklist will support the development, implementation and evaluation of guidelines. We will use crowdsourcing to revise the checklist and keep it up to date. PMID:24344144

Wrong postural hygiene and ergonomics in dental students of the University of Valencia (Spain) (part I).

Science.gov (United States)

Cervera-Espert, J; Pascual-Moscardó, A; Camps-Alemany, I

2018-02-01

Failure to adopt a correct working posture can lead to occupational diseases. Evaluate knowledge in relation to ergonomics about BHOP concept and its application to routine clinical practice amongst undergraduate and postgraduate dental students in the University of Valencia (Valencia, Spain). A study based on interviews of undergraduate and postgraduate dental students in the University of Valencia (Valencia, Spain) was carried out. The information from a total of 336 interviews was used for the statistical analysis, differentiating according to gender and academic year: knowledge of ergonomics, pain prevalence and antecedents, assessment of the possible necessity for improved training in ergonomics, and evaluation of postural hygiene. Only 28.6% of the students were found to sit correctly in the dentist chair. Furthermore, in the opinion of the students, very few subjects during the career afforded adequate teaching in relation to ergonomics and working posture. The analysis of postural hygiene showed great variability. There were no significant differences in posture between males and females, although some incorrect postures appeared to be associated with the academic year (Ppostural hygiene were noted on progressing from one academic year to the next. The students in our study were not familiar with the principles of ergonomics and did not sit correctly in the dentist chair. Improved training in this field is required in dental school. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Does a robotic surgery approach offer optimal ergonomics to gynecologic surgeons?: a comprehensive ergonomics survey study in gynecologic robotic surgery.

Science.gov (United States)

Lee, Mija Ruth; Lee, Gyusung Isaiah

2017-09-01

To better understand the ergonomics associated with robotic surgery including physical discomfort and symptoms, factors influencing symptom reporting, and robotic surgery systems components recommended to be improved. The anonymous survey included 20 questions regarding demographics, systems, ergonomics, and physical symptoms and was completed by experienced robotic surgeons online through American Association of Gynecologic Laparoscopists (AAGL) and Society of Robotic Surgery (SRS). There were 289 (260 gynecology, 22 gynecology-oncology, and 7 urogynecology) gynecologic surgeon respondents regularly practicing robotic surgery. Statistical data analysis was performed using the t-test, χ² test, and logistic regression. One hundred fifty-six surgeons (54.0%) reported experiencing physical symptoms or discomfort. Participants with higher robotic case volume reported significantly lower physical symptom report rates (pergonomic settings not only acknowledged that the adjustments were helpful for better ergonomics but also reported a lower physical symptom rate (pergonomic settings (32.7%), took a break (33.3%) or simply ignored the problem (34%). Fingers and neck were the most common body parts with symptoms. Eye symptom complaints were significantly decreased with the Si robot (pergonomics were microphone/speaker, pedal design, and finger clutch. More than half of participants reported physical symptoms which were found to be primarily associated with confidence in managing ergonomic settings and familiarity with the system depending on the volume of robotic cases. Optimal guidelines and education on managing ergonomic settings should be implemented to maximize the ergonomic benefits of robotic surgery. Copyright © 2017. Asian Society of Gynecologic Oncology, Korean Society of Gynecologic Oncology

A model evaluation checklist for process-based environmental models

Science.gov (United States)

Jackson-Blake, Leah

2015-04-01

Mechanistic catchment-scale phosphorus models appear to perform poorly where diffuse sources dominate. The reasons for this were investigated for one commonly-applied model, the INtegrated model of CAtchment Phosphorus (INCA-P). Model output was compared to 18 months of daily water quality monitoring data in a small agricultural catchment in Scotland, and model structure, key model processes and internal model responses were examined. Although the model broadly reproduced dissolved phosphorus dynamics, it struggled with particulates. The reasons for poor performance were explored, together with ways in which improvements could be made. The process of critiquing and assessing model performance was then generalised to provide a broadly-applicable model evaluation checklist, incorporating: (1) Calibration challenges, relating to difficulties in thoroughly searching a high-dimensional parameter space and in selecting appropriate means of evaluating model performance. In this study, for example, model simplification was identified as a necessary improvement to reduce the number of parameters requiring calibration, whilst the traditionally-used Nash Sutcliffe model performance statistic was not able to discriminate between realistic and unrealistic model simulations, and alternative statistics were needed. (2) Data limitations, relating to a lack of (or uncertainty in) input data, data to constrain model parameters, data for model calibration and testing, and data to test internal model processes. In this study, model reliability could be improved by addressing all four kinds of data limitation. For example, there was insufficient surface water monitoring data for model testing against an independent dataset to that used in calibration, whilst additional monitoring of groundwater and effluent phosphorus inputs would help distinguish between alternative plausible model parameterisations. (3) Model structural inadequacies, whereby model structure may inadequately represent

Economic Ergonomic Approach to Design an Optimal Manpower and Mechanization in Rice Production

Science.gov (United States)

Muanah; Syuaib, M. F.; Liyantono

2018-05-01

Productivity of manpower could be improved by considering the economic and ergonomic aspect. The ergonomic aspect (human factor) is required to design an optimal manpower, while in the economic aspect, the well being of manpower could be evaluated from the amount of received income based on their work capability. This research was conducted on February 2016 to January 2017 in Gapoktan Silih Asih rice field Cigombong, Bogor. This study aims to analyze the income of manpower based on current conditions, increasement of working hours and mechanization addition. The results showed that manpower income based on the current condition and ergonomic consideration was Rp 1,174,030/person.month, by increasing the working hours with ergonomic consideration the obtained income was Rp 1,766,204/person.month. the revenues were based on the existing work system even though the increasement of working hours have not provided optimal income due to low productivity. Therefore the results of analysis with the addition of selective mechanization, showed self-ownership machinery was more profitable the obtained income have more than the Bogor minimum wage standard of Rp 2,969,325/person.month.

Analysis of ergonomic furniture made of wood and sub-products from renewable forests.

Science.gov (United States)

de Oliveira, Luciana Aparecida; de Souza, Amaury Paulo; Fialho, Patrícia Bhering; Minette, Luciano José; de Torres, Fernanda Freitas Costa

2012-01-01

The furniture ergonomic evaluation was carried out through the use of questionnaires and forms in industries. For the ergonomic product analysis, it was used the methodology "Object Ergonomics - Ergonomic System Technical Reading" (design goals and management actions), and measurements of products. The values achieved were compared with the standard dimensions, and the compliance or non-compliance of the furniture to it was assessed. In relation to the dimensions of the bed, the following variables did not comply with the norms: external and internal length, external and internal width, height and width of the sidebar and distance to the floor. The dimensions of these variables were above the recommended values. The double bed was inadequate for management actions and maintenance. Since the kitchen cabinet is a product that went through physical testing and follows national standards; the finish used is powder coating. The kitchen cabinet proved to be appropriate in all design requirements and for management actions. Both furniture pieces were inadequate, considering the difficulty for maintenance when a product or part of it was damaged. It was recommended the creation of regulatory standards for the production of safe and comfortable furniture.

Participatory ergonomics and new work: reducing neck complaints in assembling.

Science.gov (United States)

Miguez, S A; Hallbeck, M S; Vink, P

2012-01-01

A participatory ergonomics approach is used to create a new work environment, which is aimed at reducing neck complaints in a cell phone assembly. The participatory ergonomics program included an initiative, problem identification, a selection of solutions, an implementation and evaluation. Twenty-eight women, all operators on an assembly line of cell phone boards, voluntarily participated in the design and evaluation of a device before implementing the device to all 215 employees performing that job. Prior to and after the intervention, RULA, comfort experiences and interviews were used. After introducing an adjustable angled small counter, these measurements showed both posture and comfort improvements. 90% of the 215 workers preferred the new work station and the neck complaints were reduced in 75% of the group. It also showed that the initial prototype needed to be modified as to reduce its sharp edges/compression points for the forearm. This project shows the importance of iterative testing and that an initiative by workers enlarges the chance of successful implementation.

The effect on work ability of a tailored ergonomic learning program

DEFF Research Database (Denmark)

Sell, Lea; Lund, Henrik; Holtermann, Andreas

2016-01-01

BACKGROUND: The physical working conditions and the musculoskeletal health of industrial workers have an effect on their work ability. OBJECTIVE: The paper evaluates the effectiveness of an ergonomic learning program focused on the development of low strain working techniques. The project...

Adherence to the use of the surgical checklist for patient safety

Directory of Open Access Journals (Sweden)

Eliane Cristina Sanches Maziero

Full Text Available Objective: Evaluate adherence to the checklist of the Programa Cirurgias Seguras (safe surgery programme at a teaching hospital. Methods: Evaluative study conducted at a teaching hospital in the south of Brazil in 2012. Data were collected by means of non-participant observation in 20 hip and knee replacement surgeries and an instrument that was created for research based on the checklist and used by the institution. Results: In the observed procedures (n = 20 there was significant adhesion (p<0.05 to the instrument in relation to the verification of documentation, fasting, hair removal in the surgical site, absence of nail varnish and accessories, identification of the patient and surgical site on admission to the surgical unit, availability of blood and functionality of materials. However, there was no significant adherence to the checklist in the operating room in relation to patient identification, procedure and laterality, team introduction, surgical break and materials count. Conclusion: The results showed that the items on the checklist were verified nonverbally and there was no significant adherence to the instrument.

Toward a transdisciplinary approach of ergonomic design for sustainability.

Science.gov (United States)

Di Bucchianico, Giuseppe; Marano, Antonio; Rossi, Emilio

2012-01-01

Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.

Ergonomics and information technique

International Nuclear Information System (INIS)

Krueger, H.

1985-01-01

Ergonomics are an essential safety factor in controlling automated processes. It has to be taken into account in three stages: information presentation, information perception and information treatment

Distributed System Design Checklist

Science.gov (United States)

Hall, Brendan; Driscoll, Kevin

2014-01-01

This report describes a design checklist targeted to fault-tolerant distributed electronic systems. Many of the questions and discussions in this checklist may be generally applicable to the development of any safety-critical system. However, the primary focus of this report covers the issues relating to distributed electronic system design. The questions that comprise this design checklist were created with the intent to stimulate system designers' thought processes in a way that hopefully helps them to establish a broader perspective from which they can assess the system's dependability and fault-tolerance mechanisms. While best effort was expended to make this checklist as comprehensive as possible, it is not (and cannot be) complete. Instead, we expect that this list of questions and the associated rationale for the questions will continue to evolve as lessons are learned and further knowledge is established. In this regard, it is our intent to post the questions of this checklist on a suitable public web-forum, such as the NASA DASHLink AFCS repository. From there, we hope that it can be updated, extended, and maintained after our initial research has been completed.

Designing the Electronic Classroom: Applying Learning Theory and Ergonomic Design Principles.

Science.gov (United States)

Emmons, Mark; Wilkinson, Frances C.

2001-01-01

Applies learning theory and ergonomic principles to the design of effective learning environments for library instruction. Discusses features of electronic classroom ergonomics, including the ergonomics of physical space, environmental factors, and workstations; and includes classroom layouts. (Author/LRW)

Following ergonomics guidelines decreases physical and cardiovascular workload during cleaning tasks

DEFF Research Database (Denmark)

Samani, Afshin; Holtermann, Andreas; Søgaard, Karen

2012-01-01

The aim was to investigate the effect of ergonomics guidelines on muscular activity, postural and cardiovascular load during cleaning. Eighteen cleaners performed 10 min of cleaning tasks in two locations; three min in a laboratory and seven min in a lecture room. All participants performed...... the task with or without focusing on ergonomics guidelines (ergonomics/non-ergonomics session). Bipolar surface electromyography was recorded bilaterally from upper trapezius and erector spinae muscles. A tri-axial accelerometer package was mounted on the low back (L5-S1) to measure postural changes......, and the cardiovascular load was estimated by electrocardiogram. Ergonomics sessions resulted in lower muscular load, a more complex pattern of muscular activity, lower range of motion and angular velocity of the trunk as well as lower cardiovascular load compared with non-ergonomics sessions (p ...

The Simulation and Animation of Virtual Humans to Better Understand Ergonomic Conditions at Manual Workplaces

Directory of Open Access Journals (Sweden)

Jürgen Rossmann

2010-08-01

Full Text Available This article extends an approach to simulate and control anthro- pomorphic kinematics as multiagent-systems. These "anthro- pomorphic multiagent-systems" have originally been developed to control coordinated multirobot systems in industrial applica- tions, as well as to simulate humanoid robots. Here, we apply the approach of the anthropomorphic multiagent-systems to propose a "Virtual Human" - a model of human kinematics - to analyze ergonomic conditions at manual workplaces. Ergonom- ics provide a wide range of methods to evaluate human postures and movements. By the simulation and animation of the Virtual Human we develop examples of how results from the field of ergonomics can help to consider the human factor during the design and optimization phases of production lines.

A framework for performing workplace hazard and risk analysis: a participative ergonomics approach.

Science.gov (United States)

Morag, Ido; Luria, Gil

2013-01-01

Despite the unanimity among researchers about the centrality of workplace analysis based on participatory ergonomics (PE) as a basis for preventive interventions, there is still little agreement about the necessary of a theoretical framework for providing practical guidance. In an effort to develop a conceptual PE framework, the authors, focusing on 20 studies, found five primary dimensions for characterising an analytical structure: (1) extent of workforce involvement; (2) analysis duration; (3) diversity of reporter role types; (4) scope of analysis and (5) supportive information system for analysis management. An ergonomics analysis carried out in a chemical manufacturing plant serves as a case study for evaluating the proposed framework. The study simultaneously demonstrates the five dimensions and evaluates their feasibility. The study showed that managerial leadership was fundamental to the successful implementation of the analysis; that all job holders should participate in analysing their own workplace and simplified reporting methods contributed to a desirable outcome. This paper seeks to clarify the scope of workplace ergonomics analysis by offering a theoretical and structured framework for providing practical advice and guidance. Essential to successfully implementing the analytical framework are managerial involvement, participation of all job holders and simplified reporting methods.

Relationship Between Operating Room Teamwork, Contextual Factors, and Safety Checklist Performance.

Science.gov (United States)

Singer, Sara J; Molina, George; Li, Zhonghe; Jiang, Wei; Nurudeen, Suliat; Kite, Julia G; Edmondson, Lizabeth; Foster, Richard; Haynes, Alex B; Berry, William R

2016-10-01

Studies show that using surgical safety checklists (SSCs) reduces complications. Many believe SSCs accomplish this by enhancing teamwork, but evidence is limited. Our study sought to relate teamwork to checklist performance, understand how they relate, and determine conditions that affect this relationship. Using 2 validated tools for observing and coaching operating room teams, we evaluated the association between checklist performance with surgeon buy-in and 4 domains of surgical teamwork: clinical leadership, communication, coordination, and respect. Hospital staff in 10 South Carolina hospitals observed 207 procedures between April 2011 and January 2013. We calculated levels of checklist performance, buy-in, and measures of teamwork, and evaluated their relationship, controlling for patient and case characteristics. Few teams completed most or all SSC items. Teams more often completed items considered procedural "checks" than conversation "prompts." Surgeon buy-in, clinical leadership, communication, a summary measure of teamwork overall, and observers' teamwork ratings positively related to overall checklist completion (multivariable model estimates from 0.04, p < 0.05 for communication to 0.17, p < 0.01 for surgeon buy-in). All measures of teamwork and surgeon buy-in related positively to completing more conversation prompts; none related significantly to procedural checks (estimates from 0.10, p < 0.01 for communication to 0.27, p < 0.001 for surgeon buy-in). Patient age was significantly associated with completing the checklist and prompts (p < 0.05); only case duration was positively associated with performing more checks (p < 0.10). Surgeon buy-in and surgical teamwork characterized by shared clinical leadership, open communication, active coordination, and mutual respect were critical in prompting case-related conversations, but not in completing procedural checks. Findings highlight the importance of surgeon engagement and high-quality, consistent

Visual ergonomic evaluations on four different designs of LED traffic signs

Science.gov (United States)

Chen, Yi-Chun; Huang, Ting-Yuan; Lee, Tsung-Xian; Sun, Ching-Cherng

2017-08-01

To investigate the legibility and visual comfort of LED traffic signs, an ergonomic experiment is performed on four custom-designed LED traffic signs, including three self-luminous ones as LED lightbox, LED backlight and regional LED backlight, and one non-self-luminous sign with external LED lighting. The four signs are hanged side-by-side and evaluated by observers through questionnaires. The signage dimension is one-sixth of the real freeway traffic signs, and the observation distance is 25 m. The luminance of three self-luminous signs is 216 cd/m2. The illuminance of external LED lighting is 400 lux on the traffic sign. The ambient illuminance is 2.8 and 6.0 lux in two rounds. The results show that self-luminous traffic signs provide superior legibility, visual comfort and user preference than the non-self-luminous one. Among the three self-luminous signs, regional LED backlight is most susceptible to the ambient illumination. LED lightbox has significantly better preference score than LED backlight under darker ambient lighting. Only LED lightbox has significantly better visual comfort than external LED lighting in the brighter environment. Based on the four LED traffic signs evaluated in this study, we suggest LED lightbox as the prior choice. Further investigations on the effect of ambient illumination and other designs of self-luminous traffic signs are in progress.

Validating a framework for participatory ergonomics (the PEF)

NARCIS (Netherlands)

Haines, H.; Wilson, J.R.; Vink, P.; Koningsveld, E.

2002-01-01

Participatory ergonomics is reported in an increasing number of case studies, but there is little evidence of emerging supportive theory and relatively little generic advice or guidance. The paper describes an effort to provide clarity and organization to the field of participatory ergonomics. A

Re-education of good ergonomics in nursing for Suomikoti

OpenAIRE

Isoheiko, Johanna

2016-01-01

The aim of this thesis was to promote and “refresh” the good ergonomics in nursing for Suomikoti in Sweden. The author noticed the need for re-education or “refreshment” of the nursing ergonomics among the permanent personnel as well updating knowledge of functioning of the existing assistive devices. Suomikoti has already a good and comprehensive transfer and ergonomics education and practical training for new employees arranged by their own physiotherapist and occupational therapist. It cov...

The ergonomics of command and control

OpenAIRE

Stanton, NA; Baber, C

2006-01-01

Since its inception, just after the Second World War, ergonomics research has paid special attention to the issues surrounding human control of systems. Command and Control environments continue to represent a challenging domain for Ergonomics research. We take a broad view of Command and Control research, to include C2 (Command and Control), C3 (Command, Control and Communication), and C4 (Command, Control, Communication and Computers) as well as human supervisory control paradigms. This spe...

Successful integration of ergonomics into continuous improvement initiatives.

Science.gov (United States)

Monroe, Kimberly; Fick, Faye; Joshi, Madina

2012-01-01

Process improvement initiatives are receiving renewed attention by large corporations as they attempt to reduce manufacturing costs and stay competitive in the global marketplace. These initiatives include 5S, Six Sigma, and Lean. These programs often take up a large amount of available time and budget resources. More often than not, existing ergonomics processes are considered separate initiatives by upper management and struggle to gain a seat at the table. To effectively maintain their programs, ergonomics program managers need to overcome those obstacles and demonstrate how ergonomics initiatives are a natural fit with continuous improvement philosophies.

Awareness and Knowledge of Ergonomics Among Medical Laboratory Scientists in Nigeria.

Science.gov (United States)

Oladeinde, B H; Ekejindu, I M; Omoregie, R; Aguh, O D

2015-01-01

Ergonomics awareness helps in its right application and contributes significantly to general wellbeing and safety of worker at workplace. This cross-sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, respectively, were recruited for this study using systematic random sampling technique. Data were obtained from the study participants using a questionnaire and subsequently analyzed with the statistical software INSTAT(®). Out of 106 study participants, 27 (25.5%) were reported to have heard of the term ergonomics. Awareness was significantly associated with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% confidence interval = 1.2, 7.1;P = 0.02). Awareness of ergonomics was not significantly affected by affiliation (P = 0.18), area of specialization (P = 0.78), post-qualification experience (P = 0.43), and educational qualification (P = 0.23) of the study participants. Irrespective of the affiliation of the participant, only 6 of 27 (22.2%) participants who were aware of ergonomics knew at least a benefit of right application of ergonomics in the laboratory. Knowledge of risk factors for the development of musculoskeletal disorders was reported by 8 of 27 (29.6%) persons who claimed to be aware of ergonomics. Awareness of ergonomics and knowledge of gains of its right application was poor among the study participants. Regular ergonomic education of medical laboratory scientists in Nigeria is advocated.

Ergonomics and control room design

International Nuclear Information System (INIS)

Williams, J.C.; Story, D.T.

1987-01-01

The application of ergonomic principles to the design process and some aspects of the Sizewell B control room is discussed. Also outlined is the management process which ensures that these principles are applied systematically throughout the design development activity and highlights the functional requirements which must also be met in the creation of a total man-machine system package which meets all the technical design criteria. The ergonomics requirements are part of this process and extend into all aspects of design ranging from such matters as workplace organization to environmental factors, social engineering, communications and aesthetics. (author)

Ergonomic intervention for employed persons with rheumatic conditions.

Science.gov (United States)

Allaire, Saralynn J; Backman, Catherine L; Alheresh, Rawan; Baker, Nancy A

2013-01-01

Prior articles in this series on employment and arthritis have documented the major impact arthritis and other rheumatic conditions have on employment. As expected, physically demanding job tasks, including hand use, are substantial risk factors for work limitation. Computer use has been increasing. People with arthritis may choose occupations involving extensive computer use to avoid occupations with other physical demands. But studies show many people with arthritis conditions have difficulty using computers.Ergonomic assessment and implementation helps relieve the physical and other demands of jobs. The Ergonomic Assessment Tool for Arthritis (EATA) is specifically for people with arthritis conditions. Since the EATA can be conducted off worksite, it is feasible to use with workers not wishing to disclose their condition to their employer. Available research supports the effectiveness of ergonomic intervention as a viable method to reduce work limitation for persons with arthritis. Some workers will need additional vocational intervention to remain employed long term. However, ergonomic intervention is a useful first step, as it promotes awareness of arthritis effects on work activities. Assisting workers with arthritis or other rheumatic conditions to use ergonomics to enhance their ability to work well should be an important aspect of managing these conditions.

Nature: a new paradigm for well-being and ergonomics.

Science.gov (United States)

Richardson, Miles; Maspero, Marta; Golightly, David; Sheffield, David; Staples, Vicki; Lumber, Ryan

2017-02-01

Nature is presented as a new paradigm for ergonomics. As a discipline concerned with well-being, the importance of natural environments for wellness should be part of ergonomics knowledge and practice. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being. Further, an emerging body of research has found relationships between well-being and a connection to nature, a concept that reveals the integrative character of human experience which can inform wider practice and epistemology in ergonomics. Practitioners are encouraged to bring nature into the workplace, so that ergonomics keeps pace with the move to nature-based solutions, but also as a necessity in the current ecological and social context. Practitioner Summary: Nature-based solutions are coming to the fore to address societal challenges such as well-being. As ergonomics is concerned with well-being, there is a need for a paradigm shift in the discipline. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being.

Evolutionary adaptations: theoretical and practical implications for visual ergonomics.

Science.gov (United States)

Fostervold, Knut Inge; Watten, Reidulf G; Volden, Frode

2014-01-01

The literature discussing visual ergonomics often mention that human vision is adapted to light emitted by the sun. However, theoretical and practical implications of this viewpoint is seldom discussed or taken into account. The paper discusses some of the main theoretical implications of an evolutionary approach to visual ergonomics. Based on interactional theory and ideas from ecological psychology an evolutionary stress model is proposed as a theoretical framework for future research in ergonomics and human factors. The model stresses the importance of developing work environments that fits with our evolutionary adaptations. In accordance with evolutionary psychology, the environment of evolutionary adaptedness (EEA) and evolutionarily-novel environments (EN) are used as key concepts. Using work with visual display units (VDU) as an example, the paper discusses how this knowledge can be utilized in an ergonomic analysis of risk factors in the work environment. The paper emphasises the importance of incorporating evolutionary theory in the field of ergonomics. Further, the paper encourages scientific practices that further our understanding of any phenomena beyond the borders of traditional proximal explanations.

Integrating ergonomics into the product development process

DEFF Research Database (Denmark)

Broberg, Ole

1997-01-01

and production engineers regarding information sources in problem solving, communication pattern, perception of ergonomics, motivation and requests to support tools and methods. These differences and the social and organizational contexts of the development process must be taken into account when considering......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The purpose was to elucidate conditions and strategies for integrating ergonomics into the product development process thereby preventing ergonomic problems at the time...... of manufacture of new products. In reality the product development process is not a rational problem solving process and does not proceed in a sequential manner as decribed in engineering models. Instead it is a complex organizational process involving uncertainties, iterative elements and negotiation between...

Ergonomic evaluation of CRT display in new control panels for nuclear power stations

International Nuclear Information System (INIS)

Kabazawa, Yoshihiko

1983-01-01

New control panels are to support powerfully the synthetic judgement function of operators by processing enormous plant data in the normal operation and at the time of accidents in nuclear power stations, and displaying the results in collective and ordered form on CRTs. This time, by carrying out the evaluation of new control panels using human engineering method, it was able to be confirmed that the new control panels have achieved the initial objectives, and to determine the criteria for the ergonomic evaluation of central control panels mainly with CRT display. Besides, it is considered that the application to wide range can be expected for this evaluation, not only to the CRT display system of the new control panels for nuclear power stations but also to other CRT images, therefore, the outline is reported. Chubu Electric Power Co., Inc. plans to adopt the new control panels with CRT display effectively utilizing process computers hereafter. It is necessary to give sufficient consideration to the method of using CRT images, the kinds of displayed images, colors and the form and arrangement of letters and symbols. 12 CRTs are used for the new control panel. The results are reflected to the control panel for Hamaoka No.3 plant. (Kako, I.)

Is the Autism Treatment Evaluation Checklist a Useful Tool for Monitoring Progress in Children with Autism Spectrum Disorders?

Science.gov (United States)

Magiati, I.; Moss, J.; Yates, R.; Charman, T.; Howlin, P.

2011-01-01

Background: There are few well validated brief measures that can be used to assess the general progress of young children with autism spectrum disorders (ASD) over time. In the present study, the Autism Treatment Evaluation Checklist (ATEC) was used as part of a comprehensive assessment battery to monitor the progress of 22 school-aged children…

Ergonomic considerations in school environments - the need for widening the scope.

Science.gov (United States)

Jayaratne, Kapila

2012-01-01

Behaviour patterns specific to children pose them at greater risk of environmental hazards than adults. Ergonomics is the science of matching human interaction with the proximate environment. Conventionally ergonomic principles were applied on adult work places to ensure safety of the working environment. With emerging scientific evidence, school environments are being a focus to apply ergonomic principles. Children spend more time within schools during critical developmental stages of their life. Everybody feels that the schools are safe places, but they are not. A multitude of ergonomic hazards have been identified in school settings. Widespread mismatches between anthropometry and school furniture, heavy schoolbag carriage and unhealthy bag behaviour are significant. Negative effects range from general tiredness, musculoskeletal pains, spinal deviations, shoulder level shifts, injuries and psychological disturbances. There are fragmented efforts to widen ergonomic concepts to health care professionals and other stakeholders of child health. Addressing ergonomic issues will ensure that children, the future productive generation contributing to economic growth and development of a country, are provided with opportunities in a healthy environment. This paper emphasizes the need for a concerted effort on widening the scope of ergonomics to cater for the evolving demand.

Workplace ergonomics in lean production environments: A literature review.

Science.gov (United States)

Arezes, Pedro M; Dinis-Carvalho, José; Alves, Anabela Carvalho

2015-01-01

Lean Production Systems (LPS) have become very popular among manufacturing industries, services and large commercial areas. A LPS must develop and consider a set of work features to bring compatibility with workplace ergonomics, namely at a muscular, cognitive and emotional demands level. Identify the most relevant impacts of the adoption of LPS from the ergonomics point of view and summarizes some possible drawbacks for workplace ergonomics due to a flawed application of the LPS. The impacts identified are focused in four dimensions: work pace, intensity and load; worker motivation, satisfaction and stress; autonomy and participation; and health outcome. This paper also discusses the influence that the work organization model has on workplace ergonomics and on the waste elimination previewed by LPS. Literature review focused LPS and its impact on occupational ergonomics conditions, as well as on the Health and Safety of workers. The main focus of this research is on LPS implementations in industrial environments and mainly in manufacturing industry workplaces. This is followed by a discussion including the authors' experience (and previous research). From the reviewed literature it seems that there is no consensus on how Lean principles affect the workplace ergonomics since most authors found positive (advantages) and negative (disadvantages) impacts. The negative impacts or disadvantages of LPS implementations reviewed may result from the misunderstanding of the Lean principles. Possibly, they also happen due to partial Lean implementations (when only one or two tools were implemented) that may be effective in a specific work context but not suitable to all possible situations as the principles of LPS should not lead, by definition, to any of the reported drawbacks in terms of workplace ergonomics.

Implementation of ergonomics in a service unit: challenges and advances.

Science.gov (United States)

Penteado, Eliane Villas Bôas de Freitas; de França, Maria Goretti; Ramalhoto, Ana Maria de Brito; de Oliveira, Ana Maria; Machado, Bruno Rangel Cortoppassi; Genipapeiro, Joana Angélica Matos

2012-01-01

This article discusses the implementation of ergonomics in a service unit of a major company in the energy sector. From the perspective of management, it analyses the process of implementation of ergonomics programmes in four operational areas. The objective was to diagnose the level of implementation of ergonomics. The study is descriptive, undertaken through the interaction with the technical staff of the operational areas involved, incorporating the perception of these role players concerning their work routines. The results indicated significant differences in the level of implementation of the programmes, especially those concerning structural conditions. Important conquests were registered, such as the investment in the training of specialists, the establishment of a facilitator network and the improvement of the standard for the directioning and alignment of the execution of initiatives. The linking in of the programmes with those of occupational health management emphasises its contribution to the safety and well-being of the workforce through interventions aimed mainly at eliminating and reducing ergonomic biomechanical risks. However, the need to broaden and deepen the ergonomic approach regarding organizational and cognitive aspects, as well as the insertion of ergonomics in project design of new work spaces and processes were also identified.

Surgical Safety in Pediatrics: practical application of the Pediatric Surgical Safety Checklist

Directory of Open Access Journals (Sweden)

Maria Paula de Oliveira Pires

2015-12-01

Full Text Available Objectives: to assess the practical application of the Pediatric Surgical Safety Checklist on the preoperative period and to verify family satisfaction regarding the use of the material. Method: exploratory study that aimed to analyze the use of the checklist by children who underwent surgical interventions. The sample was constituted by 60 children (from preschoolers to teens and 60 family members. The variables related to demographic characterization, filling out the checklist, and family satisfaction, being evaluated through inferential and descriptive statistical analysis. Results: most children (71.7% were male, with a median age of 7.5 years. We identified the achievement of 65.3% of the checklist items, 30.0% were not filled due to non-performance of the team and 4.7% for children and family reasons. In the association analysis, we found that the removal of accessories item (p = 0.008 was the most checked by older children. Regarding satisfaction, the family members evaluated the material as great (63.3% and good (36.7% and believed that there was a reduction of the child's anxiety (83.3%. Conclusion: the use of the checklist in clinical practice can change health services regarding safety culture and promote customer satisfaction.

Ergonomía. Vol. 1, Fundamentos

OpenAIRE

Rodríguez Mondelo, Pedro Manuel; Gregori Torada, Enrique; Barrau Bombardó, Pedro

2001-01-01

La obra ofrece una visión general de los aspectos básicos de la ergonomía. Está dividida en ocho capítulos, que abordan los temas de relaciones dimensionales, relaciones informáticas y de control, relaciones ambientales, gasto energético y capacidad de trabajo físico y trabajo mental. El libro pretende ser una guía básica para aquellas personas que se inicien en el apasionante campo de la ergonomía.

Ergonomics Integration Omproving Production Process Management in Enterprises of Latvia

OpenAIRE

Henrijs Kaļķis

2013-01-01

Dotoral thesis ERGONOMICS INTEGRATION IMPROVING PRODUCTION PROCESS MANAGEMENT IN ENTERPRISES OF LATVIA ANNOTATION Ergonomics integration in process management has great significance in organisations` growth of productivity. It is a new approach to entrepreneurship and business strategy, where ergonomic aspects and values are taken into account in ensuring the effective process management and profitability of enterprises. This study is aimed at solution of the problem of e...

Applying systems ergonomics methods in sport: A systematic review.

Science.gov (United States)

Hulme, Adam; Thompson, Jason; Plant, Katherine L; Read, Gemma J M; Mclean, Scott; Clacy, Amanda; Salmon, Paul M

2018-04-16

As sports systems become increasingly more complex, competitive, and technology-centric, there is a greater need for systems ergonomics methods to consider the performance, health, and safety of athletes in context with the wider settings in which they operate. Therefore, the purpose of this systematic review was to identify and critically evaluate studies which have applied a systems ergonomics research approach in the context of sports performance and injury management. Five databases (PubMed, Scopus, ScienceDirect, Web of Science, and SPORTDiscus) were searched for the dates 01 January 1990 to 01 August 2017, inclusive, for original peer-reviewed journal articles and conference papers. Reported analyses were underpinned by a recognised systems ergonomics method, and study aims were related to the optimisation of sports performance (e.g. communication, playing style, technique, tactics, or equipment), and/or the management of sports injury (i.e. identification, prevention, or treatment). A total of seven articles were identified. Two articles were focussed on understanding and optimising sports performance, whereas five examined sports injury management. The methods used were the Event Analysis of Systemic Teamwork, Cognitive Work Analysis (the Work Domain Analysis Abstraction Hierarchy), Rasmussen's Risk Management Framework, and the Systems Theoretic Accident Model and Processes method. The individual sport application was distance running, whereas the team sports contexts examined were cycling, football, Australian Football League, and rugby union. The included systems ergonomics applications were highly flexible, covering both amateur and elite sports contexts. The studies were rated as valuable, providing descriptions of injury controls and causation, the factors influencing injury management, the allocation of responsibilities for injury prevention, as well as the factors and their interactions underpinning sports performance. Implications and future

Awareness and Knowledge of Ergonomics Among Medical Laboratory Scientists in Nigeria

Science.gov (United States)

Oladeinde, BH; Ekejindu, IM; Omoregie, R; Aguh, OD

2015-01-01

Background: Ergonomics awareness helps in its right application and contributes significantly to general wellbeing and safety of worker at workplace. Aim: This cross-sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. Subjects and Methods: A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, respectively, were recruited for this study using systematic random sampling technique. Data were obtained from the study participants using a questionnaire and subsequently analyzed with the statistical software INSTAT®. Results: Out of 106 study participants, 27 (25.5%) were reported to have heard of the term ergonomics. Awareness was significantly associated with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% confidence interval = 1.2, 7.1;P = 0.02). Awareness of ergonomics was not significantly affected by affiliation (P = 0.18), area of specialization (P = 0.78), post-qualification experience (P = 0.43), and educational qualification (P = 0.23) of the study participants. Irrespective of the affiliation of the participant, only 6 of 27 (22.2%) participants who were aware of ergonomics knew at least a benefit of right application of ergonomics in the laboratory. Knowledge of risk factors for the development of musculoskeletal disorders was reported by 8 of 27 (29.6%) persons who claimed to be aware of ergonomics. Conclusions: Awareness of ergonomics and knowledge of gains of its right application was poor among the study participants. Regular ergonomic education of medical laboratory scientists in Nigeria is advocated. PMID:27057381

Do ergonomics improvements increase computer workers' productivity?: an intervention study in a call centre.

Science.gov (United States)

Smith, Michael J; Bayehi, Antoinette Derjani

2003-01-15

This paper examines whether improving physical ergonomics working conditions affects worker productivity in a call centre with computer-intensive work. A field study was conducted at a catalogue retail service organization to explore the impact of ergonomics improvements on worker production. There were three levels of ergonomics interventions, each adding incrementally to the previous one. The first level was ergonomics training for all computer users accompanied by workstation ergonomics analysis leading to specific customized adjustments to better fit each worker (Group C). The second level added specific workstation accessories to improve the worker fit if the ergonomics analysis indicated a need for them (Group B). The third level met Group B requirements plus an improved chair (Group A). Productivity data was gathered from 72 volunteer participants who received ergonomics improvements to their workstations and 370 control subjects working in the same departments. Daily company records of production outputs for each worker were taken before ergonomics intervention (baseline) and 12 months after ergonomics intervention. Productivity improvement from baseline to 12 months post-intervention was examined across all ergonomics conditions combined, and also compared to the control group. The findings showed that worker performance increased for 50% of the ergonomics improvement participants and decreased for 50%. Overall, there was a 4.87% output increase for the ergonomics improvement group as compared to a 3.46% output decrease for the control group. The level of productivity increase varied by the type of the ergonomics improvements with Group C showing the best improvement (9.43%). Even though the average production improved, caution must be used in interpreting the findings since the ergonomics interventions were not successful for one-half of the participants.

Ergonomics and its application to Sizewell 'B'

International Nuclear Information System (INIS)

Singleton, W.T.

1986-01-01

The scope of the ergonomics contribution to the design and operation of power stations is described on the basis of current experience in the CEGB and in other countries. The ergonomics questions which arise in relation to Sizewell 'B' are enumerated in detail. Issues which arise from the point of view of station operation and from the complementary point of view of human behaviour are considered. (author)

Ergonomic Conditions in Small Manufacturing Industries

Directory of Open Access Journals (Sweden)

Ashraf A. Shikdar

2001-12-01

Full Text Available Ergonomic conditions in small manufacturing industries were investigated. Twenty seven managers of small manufacturing industries participated in the study. Old equipment and machines, poorly designed workplaces, lack of systematic planning, layout and organization, unsafe working conditions and poor environment were found common to these industries. Fifty-nine percent of companies indicated having equipment older than 15 years. Fifty-two percent of company managers reported receiving complaints of fatigue from their workforce, 41% complaints of back pain, and 33% complaints of upper-body pain. Seventy eight percent of companies reported a noisy environment (above 90 dBA while 63% reported a hot environment. Management in 44% of the companies acknowledged failure to ensure safety rules and 48% did not provide training on manual material handling. Lack of skills in ergonomics and training, communication and resources are believed to be some of the factors contributing to the poor ergonomic conditions in a sample of small manufacturing industries in Malaysia.

Integrating ergonomics knowledge into business-driven design projects: The shaping of resource constraints in engineering consultancy.

Science.gov (United States)

Hall-Andersen, Lene Bjerg; Neumann, Patrick; Broberg, Ole

2016-10-17

The integration of ergonomics knowledge into engineering projects leads to both healthier and more efficient workplaces. There is a lack of knowledge about integrating ergonomic knowledge into the design practice in engineering consultancies. This study explores how organizational resources can pose constraints for the integration of ergonomics knowledge into engineering design projects in a business-driven setting, and how ergonomists cope with these resource constraints. An exploratory case study in an engineering consultancy was conducted. A total of 27 participants were interviewed. Data were collected applying semi-structured interviews, observations, and documentary studies. Interviews were transcribed, coded, and categorized into themes. From the analysis five overall themes emerged as major constituents of resource constraints: 1) maximizing project revenue, 2) payment for ergonomics services, 3) value of ergonomic services, 4) role of the client, and 5) coping strategies to overcome resource constraints. We hypothesize that resource constraints were shaped due to sub-optimization of costs in design projects. The economical contribution of ergonomics measures was not evaluated in the entire life cycle of a designed workplace. Coping strategies included teaming up with engineering designers in the sales process or creating an alliance with ergonomists in the client organization.

A Feminist Family Therapist Behavior Checklist.

Science.gov (United States)

Chaney, Sita E.; Piercy, Fred P.

1988-01-01

Developed Feminist Family Therapist Behavior Checklist to identify feminist family therapy skills. Used checklist to rate family therapy sessions of 60 therapists in variety of settings. Checklist discriminated between self-reported feminists and nonfeminists, between men and women, and between expert categorizations of feminist and nonfeminist…

Macro Ergonomics Interventions and their Impact on Productivity and Reduction of Musculoskeletal disorders: Including a Case Study

Directory of Open Access Journals (Sweden)

N Sadra Abarqhouei

2012-11-01

Full Text Available   Background and aims : The present studies show that the theoretical discussions and the applications of ergonomics have not been seriously handled in our country, Iran. So, the aim of the current study was to present an appropriate method which could help in increasing the productivity and decreasing the risk factors of ergonomics in socio-technical systems.   Methods: During the present study, a theoretical model was developed to guide the “ergonomic intervention processes” and its evaluation and application was carried out for an educational organization (EO. The faculty members were selected as the subjects of statistical survey and simple random sampling was performed. The level of musculoskeletal disorders was evaluated in control and treatment groups. Comparative analysis of the obtained data was carried out using fuzzy numbers and their level of confinement.   Results: According to the results of present study with the help of ergonomic interventions, an increase in the activity of staff members, increased revenue, expansion of work with the least number of manpower and a decrease in the overall expenses was seen as compared to the base year. In addition, the analysis of questionnaires with fuzzy approach has shown that the level of musculoskeletal disorders in the experimental group was less as compared to that of control group.   Conclusion: The results obtained by the use of macro and micro ergonomic interventions (Total ergonomics have proved that these methods were successful by increasing the innovation and motivation of the staff members to solve the organizational problems as compared to the base year. The decrease of musculoskeletal disorders among the members resulted to an increase of performance in different units of the educational organization.  

Preliminary study of ergonomic behavior during simulated ultrasound-guided regional anesthesia using a head-mounted display.

Science.gov (United States)

Udani, Ankeet D; Harrison, T Kyle; Howard, Steven K; Kim, T Edward; Brock-Utne, John G; Gaba, David M; Mariano, Edward R

2012-08-01

A head-mounted display provides continuous real-time imaging within the practitioner's visual field. We evaluated the feasibility of using head-mounted display technology to improve ergonomics in ultrasound-guided regional anesthesia in a simulated environment. Two anesthesiologists performed an equal number of ultrasound-guided popliteal-sciatic nerve blocks using the head-mounted display on a porcine hindquarter, and an independent observer assessed each practitioner's ergonomics (eg, head turning, arching, eye movements, and needle manipulation) and the overall block quality based on the injectate spread around the target nerve for each procedure. Both practitioners performed their procedures without directly viewing the ultrasound monitor, and neither practitioner showed poor ergonomic behavior. Head-mounted display technology may offer potential advantages during ultrasound-guided regional anesthesia.

Ergonomics research methods

Science.gov (United States)

Uspenskiy, S. I.; Yermakova, S. V.; Chaynova, L. D.; Mitkin, A. A.; Gushcheva, T. M.; Strelkov, Y. K.; Tsvetkova, N. F.

1973-01-01

Various factors used in ergonomic research are given. They are: (1) anthrometric measurement, (2) polyeffector method of assessing the functional state of man, (3) galvanic skin reaction, (4) pneumography, (5) electromyography, (6) electrooculography, and (7) tachestoscopy. A brief summary is given of each factor and includes instrumentation and results.

Ergonomics of disposable handles for minimally invasive surgery.

Science.gov (United States)

Büchel, D; Mårvik, R; Hallabrin, B; Matern, U

2010-05-01

The ergonomic deficiencies of currently available minimally invasive surgery (MIS) instrument handles have been addressed in many studies. In this study, a new ergonomic pistol handle concept, realized as a prototype, and two disposable ring handles were investigated according to ergonomic properties set by new European standards. In this study, 25 volunteers performed four practical tasks to evaluate the ergonomics of the handles used in standard operating procedures (e.g., measuring a suture and cutting to length, precise maneuvering and targeting, and dissection of a gallbladder). Moreover, 20 participants underwent electromyography (EMG) tests to measure the muscle strain they experienced while carrying out the basic functions (grasp, rotate, and maneuver) in the x, y, and z axes. The data measured included the number of errors, the time required for task completion, perception of pressure areas, and EMG data. The values for usability in the test were effectiveness, efficiency, and user satisfaction. Surveys relating to the subjective rating were completed after each task for each of the three handles tested. Each handle except the new prototype caused pressure areas and pain. Extreme differences in muscle strain could not be observed for any of the three handles. Experienced surgeons worked more quickly with the prototype when measuring and cutting a suture (approximately 20%) and during precise maneuvering and targeting (approximately 20%). On the other hand, they completed the dissection task faster with the handle manufactured by Ethicon. Fewer errors were made with the prototype in dissection of the gallbladder. In contrast to the handles available on the market, the prototype was always rated as positive by the volunteers in the subjective surveys. None of the handles could fulfil all of the requirements with top scores. Each handle had its advantages and disadvantages. In contrast to the ring handles, the volunteers could fulfil most of the tasks more

Occupational ergonomics in space

Science.gov (United States)

Stramler, J.

1992-01-01

Ergonomics is often defined simply as the study of work. Related or synonymous terms include human factors, human engineering, engineering psychology, and others. Occupational ergonomics is a term that has been proposed to describe the study of the working environment, including the physical consequences resulting from having an improperly designed workplace. The routine space working environment presents some problems not found in the typical Earthbound workplace. These include radiation, intravehicular contamination/pollution, temperature extremes, impact with other objects, limited psychosocial relationships, sensory deprivation, and reduced gravity. These are important workplace considerations, and may affect astronauts either directly at work or at some point during their life as a result of their work under these conditions. Some of the major issues associated with each of these hazards are presented.

ERGONOMIC DESIGN RECOMMENDATIONS BASED ON AN ACTUAL CHAINSAW DESIGN

Directory of Open Access Journals (Sweden)

J. Kaljun

2012-01-01

Full Text Available

ENGLISH ABSTRACT: To develop high quality products, a designer has to consider various influential factors, one of which is ergonomics. And to fashion a specific product for the user, a designer needs expert knowledge of the user’s requirements. However, expert knowledge can also be accessed through an intelligent advisory system for ergonomic design support. The effectiveness of such an expert system depends mainly on the quality of the knowledge base and on the appropriateness of the system's inference engine. Data for the system’s knowledge base can be collected in different ways. One approach is to study relevant projects to collect appropriate ergonomic solutions; another is to recognise bottlenecks in ergonomic design. This paper presents a case study of the design of an actual chainsaw – with emphasis on ergonomic design solutions – that can be transformed into ergonomic design recommendations. At the end of the paper, an application of one of the derived recommendations within the knowledge base of the intelligent advisory system is presented.

AFRIKAANSE OPSOMMING: By die ontwerp van gehaltegoedere moet aandag gegee word aan verskeie faktore soos die Ergonomie. Die produkontwerper moet deeglike kennis dra van die verbruikersbehoeftes. Daarbenewens moet hy liefs ook gebruik maak van ’n intelligente sisteem vir ontwerphulp. Die navorsing is toegespits op datasteun vir ’n kettingsaagontwerp en toon hoe die intelligente sisteem betekenisvolle ondersteuning verleen.

Ergonomics Climate Assessment: A measure of operational performance and employee well-being.

Science.gov (United States)

Hoffmeister, Krista; Gibbons, Alyssa; Schwatka, Natalie; Rosecrance, John

2015-09-01

Ergonomics interventions have the potential to improve operational performance and employee well-being. We introduce a framework for ergonomics climate, the extent to which an organization emphasizes and supports the design and modification of work to maximize both performance and well-being outcomes. We assessed ergonomics climate at a large manufacturing facility twice during a two-year period. When the organization used ergonomics to promote performance and well-being equally, and at a high level, employees reported less work-related pain. A larger discrepancy between measures of operational performance and employee well-being was associated with increased reports of work-related pain. The direction of this discrepancy was not significantly related to work-related pain, such that it didn't matter which facet was valued more. The Ergonomics Climate Assessment can provide companies with a baseline assessment of the overall value placed on ergonomics and help prioritize areas for improving operational performance and employee well-being. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Participatory ergonomics among female cashiers from a department store.

Science.gov (United States)

Cristancho, María Yanire León

2012-01-01

The objective of this paper was to control ergonomic risks among female cashiers working in a department store belonging to the retail market. This study was conducted between May and November 2010. Participatory ergonomics was applied through knowing and understanding how the company works, establishing the work team (Ergo group), training the team in ergonomics-related topics, and making decisions and interventions. The sample was composed of 71 participants--mostly female cashiers--, and all of them have a musculoskeletal compromise, declaring pain or discomfort mainly in the neck, lower back, right wrist and shoulders. Among others, following problems were found: postural overload, repetitive work, manual load handling, mental fatigue, environmental discomfort, variable work schedules, extended working days, and absence of breaks. In the intervention, the main implemented changes were the redesign of workstation, complete change of chairs and keyboards, and the implementation of a rotation system, as well breaks for compensatory exercises. After that, an evident improvement of found problems was observed, therefore it can be concluded that participatory ergonomics is an attractive methodology, appropriate and efficient for solving and controlling ergonomic risks and problems.

Integrating ergonomics into engineering design: the role of objects.

Science.gov (United States)

Hall-Andersen, Lene Bjerg; Broberg, Ole

2014-05-01

The objective of this study was to explore the role of objects in integrating ergonomic knowledge in engineering design processes. An engineering design case was analyzed using the theoretical concepts of boundary objects and intermediary objects: Boundary objects facilitate collaboration between different knowledge domains, while the aim of an intermediary object is to circulate knowledge and thus produce a distant effect. Adjustable layout drawings served as boundary objects and had a positive impact on the dialog between an ergonomist and designers. An ergonomic guideline document was identified as an intermediary object. However, when the ergonomic guidelines were circulated in the design process, only some of the guidelines were transferred to the design of the sterile processing plant. Based on these findings, recommendations for working with objects in design processes are included. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomic assessments of three Idaho National Engineering Laboratory cafeterias

Energy Technology Data Exchange (ETDEWEB)

Ostrom, L.T.; Romero, H.A.; Gilbert, B.G.; Wilhelmsen, C.A.

1993-01-01

The Idaho National Engineering Laboratory is a Department of Energy facility that performs a variety of engineering and research projects. EG G Idaho is the prime contractor for the laboratory and, as such, performs the support functions in addition to technical, research, and development functions. As a part of the EG G Idaho Industrial Hygiene Initiative, ergonomic assessments were conducted at three Idaho National Engineering Laboratory Cafeterias. The purposes of the assessments were to determine whether ergonomic problems existed in the work places and, if so, to make recommendations to improve the work place and task designs. The study showed there were ergonomic problems in all three cafeterias assessed. The primary ergonomic stresses observed included wrist and shoulder stress in the dish washing task, postural stress in the dish washing and food preparation tasks, and back stress in the food handling tasks.

Ergonomic assessments of three Idaho National Engineering Laboratory cafeterias

Energy Technology Data Exchange (ETDEWEB)

Ostrom, L.T.; Romero, H.A.; Gilbert, B.G.; Wilhelmsen, C.A.

1993-05-01

The Idaho National Engineering Laboratory is a Department of Energy facility that performs a variety of engineering and research projects. EG&G Idaho is the prime contractor for the laboratory and, as such, performs the support functions in addition to technical, research, and development functions. As a part of the EG&G Idaho Industrial Hygiene Initiative, ergonomic assessments were conducted at three Idaho National Engineering Laboratory Cafeterias. The purposes of the assessments were to determine whether ergonomic problems existed in the work places and, if so, to make recommendations to improve the work place and task designs. The study showed there were ergonomic problems in all three cafeterias assessed. The primary ergonomic stresses observed included wrist and shoulder stress in the dish washing task, postural stress in the dish washing and food preparation tasks, and back stress in the food handling tasks.

Using Balanced Scorecard (BSC) approach to improve ergonomics programs.

Science.gov (United States)

Fernandes, Marcelo Vicente Forestieri

2012-01-01

The purpose of this paper is to propose foundations for a theory of using the Balanced Scorecard (BSC) methodology to improve the strategic view of ergonomics inside the organizations. This approach may help to promote a better understanding of investing on an ergonomic program to obtain good results in quality and production, as well as health maintenance. It is explained the basics of balanced scorecard, and how ergonomists could use this to work with strategic enterprises demand. Implications of this viewpoint for the development of a new methodology for ergonomics strategy views are offered.

A Study of Cumulative Trauma Disorders of the Upper Extremities and Occupation in Wright-Patterson Adir Force Base Civilian Personnel.

Science.gov (United States)

1995-09-01

Workers: Individual, Ergonomie and Work Organizational Factors," Ergonomics, 38: 763- 776 (April 1995). Brogmus, G.E. and R. Marko. "The...Naval Health Research Center, San Diego CA, June 1988 (AD-A199920). Keyserling, W. M. and others. "A Checklist For Evaluating Ergonomie Risk Factors

Process and implementation of participatory ergonomic interventions: a systematic review.

Science.gov (United States)

van Eerd, Dwayne; Cole, Donald; Irvin, Emma; Mahood, Quenby; Keown, Kiera; Theberge, Nancy; Village, Judy; St Vincent, Marie; Cullen, Kim

2010-10-01

Participatory ergonomic (PE) interventions may vary in implementation. A systematic review was done to determine the evidence regarding context, barriers and facilitators to the implementation of participatory ergonomic interventions in workplaces. In total, 17 electronic databases were searched. Data on PE process and implementation were extracted from documents meeting content and quality criteria and synthesised. The search yielded 2151 references. Of these, 190 documents were relevant and 52 met content and quality criteria. Different ergonomic teams were described in the documents as were the type, duration and content of ergonomic training. PE interventions tended to focus on physical and work process changes and report positive impacts. Resources, programme support, ergonomic training, organisational training and communication were the most often noted facilitators or barriers. Successful PE interventions require the right people to be involved, appropriate ergonomic training and clear responsibilities. Addressing key facilitators and barriers such as programme support, resources, and communication is paramount. STATEMENT OF RELEVANCE: A recent systematic review has suggested that PE has some effect on reducing symptoms, lost days of work and claims. Systematic reviews of effectiveness provide practitioners with the desire to implement but do not provide clear information about how. This article reviews the literature on process and implementation of PE.

Flexible workspace design and ergonomics training: impacts on the psychosocial work environment, musculoskeletal health, and work effectiveness among knowledge workers.

Science.gov (United States)

Robertson, Michelle M; Huang, Yueng-Hsiang; O'Neill, Michael J; Schleifer, Lawrence M

2008-07-01

A macroergonomics intervention consisting of flexible workspace design and ergonomics training was conducted to examine the effects on psychosocial work environment, musculoskeletal health, and work effectiveness in a computer-based office setting. Knowledge workers were assigned to one of four conditions: flexible workspace (n=121), ergonomics training (n=92), flexible workspace+ergonomics training (n=31), and a no-intervention control (n=45). Outcome measures were collected 2 months prior to the intervention and 3 and 6 months post-intervention. Overall, the study results indicated positive, significant effects on the outcome variables for the two intervention groups compared to the control group, including work-related musculoskeletal discomfort, job control, environmental satisfaction, sense of community, ergonomic climate, communication and collaboration, and business process efficiency (time and costs). However, attrition of workers in the ergonomics training condition precluded an evaluation of the effects of this intervention. This study suggests that a macroergonomics intervention is effective among knowledge workers in office settings.

ACER Checklists for School Beginners: Manual.

Science.gov (United States)

Rowe, Helga A. H.

This assessment package consists of a checklist for teachers, a checklist for parents, a class record sheet, and a manual designed to be used by teachers to highlight the strengths and weaknesses of individual children soon after their entry into school or during their last term in preschool or kindergarten classes. The Checklist for Teachers…

Evaluation of Musculoskeletal Disorders among computer Users in Isfahan

Directory of Open Access Journals (Sweden)

Ayoub Ghanbary

2015-08-01

Full Text Available Along with widespread use of computers, work-related musculoskeletal disorders (MSDs have become the most prevalent ergonomic problems in computer users. With evaluating musculoskeletal disorders among Computer Users can intervent a action to reduce musculoskeletal disorders carried out. The aim of the present study was to Assessment of Musculoskeletal Disorders among Computer Users in Isfahan University with Rapid Office Strain Assessment (ROSA method and Nordic questionnaire. This cross-sectional study was conducted on 96 computer users in Isfahan university. The data were analyzed using correlation and line regression by test spss 20. and descriptive statistics and Anova test. Data collection tool was Nordic questionnaire and Rapid Office Strain Assessment method checklist. The results of Nordic questionnaire showed that prevalence of musculoskeletal disorders in computer users were in the shoulder (62.1%, neck (54.9% and back (53.1% respectively more than in other parts of the body. Based on the level of risk of ROSA were 19 individuals in an area of low risk, 50 individual area of notification and 27 individual in the area hazard and need for ergonomics interventions. Musculoskeletal disorders prevalence were in women more than men. Also Anova test showed that there is a direct and significant correlation between age and work experience with a final score ROSA (p<0.001. The study result showed that the prevalence of MSDs among computer users of Isfahan universities is pretty high and must ergonomic interventions such as computer workstation redesign, users educate about ergonomic principles computer with work, reduced working hours in computers with work, and elbows should be kept close to the body with the angle between 90 and 120 degrees to reduce musculoskeletal disorders carried out.

Evaluation of manual and automatic manually triggered ventilation performance and ergonomics using a simulation model.

Science.gov (United States)

Marjanovic, Nicolas; Le Floch, Soizig; Jaffrelot, Morgan; L'Her, Erwan

2014-05-01

In the absence of endotracheal intubation, the manual bag-valve-mask (BVM) is the most frequently used ventilation technique during resuscitation. The efficiency of other devices has been poorly studied. The bench-test study described here was designed to evaluate the effectiveness of an automatic, manually triggered system, and to compare it with manual BVM ventilation. A respiratory system bench model was assembled using a lung simulator connected to a manikin to simulate a patient with unprotected airways. Fifty health-care providers from different professional groups (emergency physicians, residents, advanced paramedics, nurses, and paramedics; n = 10 per group) evaluated manual BVM ventilation, and compared it with an automatic manually triggered device (EasyCPR). Three pathological situations were simulated (restrictive, obstructive, normal). Standard ventilation parameters were recorded; the ergonomics of the system were assessed by the health-care professionals using a standard numerical scale once the recordings were completed. The tidal volume fell within the standard range (400-600 mL) for 25.6% of breaths (0.6-45 breaths) using manual BVM ventilation, and for 28.6% of breaths (0.3-80 breaths) using the automatic manually triggered device (EasyCPR) (P < .0002). Peak inspiratory airway pressure was lower using the automatic manually triggered device (EasyCPR) (10.6 ± 5 vs 15.9 ± 10 cm H2O, P < .001). The ventilation rate fell consistently within the guidelines, in the case of the automatic manually triggered device (EasyCPR) only (10.3 ± 2 vs 17.6 ± 6, P < .001). Significant pulmonary overdistention was observed when using the manual BVM device during the normal and obstructive sequences. The nurses and paramedics considered the ergonomics of the automatic manually triggered device (EasyCPR) to be better than those of the manual device. The use of an automatic manually triggered device may improve ventilation efficiency and decrease the risk of

[Nursing work and ergonomics].

Science.gov (United States)

Marziale, M H; Robazzi, M L

2000-12-01

This text articulates empirical evidence resulting from scientific work with the intention of providing a reflection about the application of ergonomics as a methodological instrument to support improvement of the labor conditions of nursing personnel in hospitals.

Ergonomic risk factor identification for sewing machine operators through supervised occupational therapy fieldwork in Bangladesh: A case study.

Science.gov (United States)

Habib, Md Monjurul

2015-01-01

Many sewing machine operators are working with high risk factors for musculoskeletal health in the garments industries in Bangladesh. To identify the physical risk factors among sewing machine operators in a Bangladeshi garments factory. Sewing machine operators (327, 83% female), were evaluated. The mean age of the participants was 25.25 years. Six ergonomic risk factors were determined using the Musculoskeletal Disorders risk assessment. Data collection included measurements of sewing machine table and chair heights; this data was combined with information from informal interviews. Significant ergonomic risk factors found included the combination of awkward postures of the neck and back, repetitive hand and arm movements, poor ergonomic workstations and prolonged working hours without adequate breaks; these risk factors resulted in musculoskeletal complaints, sick leave, and switching jobs. One aspect of improving worker health in garment factories includes addressing musculoskeletal risk factors through ergonomic interventions.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B [ed.; Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B. (ed.) (Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering)

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Ergonomics in an oral pathology laboratory: Back to basics in microscopy.

Science.gov (United States)

Sundaragiri, Krishna Sireesha; Shrivastava, Shikha; Sankhla, Bharat; Bhargava, Akshay

2014-09-01

Ergonomics is simply a science focused on "study of work" to reduce fatigue and discomfort through product design. A comprehensive ergonomics program for the pathology laboratory has become necessary to prevent the occurrence of work related musculoskeletal disorders (MSDs) and accidents. Most of the literature on ergonomics involve various web links or occasional studies on the effect of laboratory work and associated MSDs. A Google search was carried out corresponding to the terms "ergonomics", "pathology laboratory", "microscope". All the relevant literature from web sources was sorted out and categorized. In this review, we intend to identify basic anthropometric factors, biomechanical risk factors, laboratory design considerations and specific microscopy-related considerations. The ultimate aim of ergonomics is to provide a safe environment for laboratory personnel to conduct their work and to allow maximum flexibility for safe research use.

Europe Chapter of the Human Factors and Ergonomics Society Meeting

National Research Council Canada - National Science Library

de

2002-01-01

The Final Proceedings for Europe Chapter of the Human Factors and Ergonomics Society Meeting, 7 November 2001 - 9 November 2001 This is an interdisciplinary conference in human factors and ergonomics...

Ergonomics Calibration Training Utilizing Photography for Dental Hygiene Faculty Members.

Science.gov (United States)

Partido, Brian B

2017-10-01

Dental and dental hygiene clinical faculty members often do not provide consistent instruction, especially since most procedures involve clinical judgment. Although instructional variations frequently translate into variations in student performance, the effect of inconsistent instruction is unknown, especially related to ergonomics. The aim of this study was to determine whether photography-assisted calibration training would improve interrater reliability among dental hygiene faculty members in ergonomics evaluation. The photography-assisted ergonomics calibration program incorporated features to improve accessibility and optimize the quality of the training. The study used a two-group repeated measures design with a convenience sample of 11 dental hygiene faculty members (eight full-time and three part-time) during the autumn 2016 term at one U.S. dental school. At weeks one and seven, all participants evaluated imaged postures of five dental students using a modified-dental operator posture assessment instrument. During weeks three and five, training group participants completed calibration training using independent and group review of imaged postures. All pre-training and post-training evaluations were evaluated for interrater reliability. Two-way random effects intraclass coefficient (ICC) values were calculated to measure the effects of the training on interrater reliability. The average measure of ICC of the training group improved from 0.694 with a 95% confidence interval (CI) of 0.001 to 0.965 (F(4,8)=3.465, p>0.05) to 0.766 with a 95% CI of 0.098 to 0.972 (F(4,8)=7.913, p<0.01). The average measure of ICC of the control group improved from 0.821 with a 95% CI of 0.480 to 0.978 (F(4,28)=7.702, p<0.01) to 0.846 with a 95% CI of 0.542 to 0.981 (F(4,28)=8.561, p<0.01). These results showed that the photography-assisted calibration training with the opportunity to reconcile different opinions resulted in improved agreement among these faculty members.

Bad Enough Ergonomics: A Case Study of an Office Chair

OpenAIRE

Peteri, Virve

2017-01-01

The article analyzes ergonomics as a social and cultural phenomenon, as something that is formulated and described by speakers in a specific social context; in a company that is specialized in producing ergonomic office furniture. Through a case study of an office chair, the article examines how ergonomics and its association with the vision of the potential users and their working spaces are constructed by the relevant actors in project meetings and individual interviews during the manufactu...

Eletrobras management program in ergonomics: the pursuit of excellence through maturity levels.

Science.gov (United States)

Pires, Paulo Roberto de Oliveira Bassil; Rezende, Fagner Fagundes

2012-01-01

Ergonomics for Eletrobras arose from the need in having an environment more suitable to the characteristics and circumstances of employees, in compliance with Regulation Standard no. 17 - Ergonomics (NR17) of the Ministry of Labor and Employment. Being a mixed economy company with regionalized anthropometric characteristics of its employees, the study of ergonomic adjustments and improvement of the concept of Ergonomics were and have been of great importance to the company's production environment. These advances have contributed to the development of specific technical criteria for the purchase of furniture and work tools (accessories), apart from their possible effects on the user. Ergonomics has been perceived as a technical-scientific tool, aimed to study labor interactions, new technologies and specific characteristics of the activities performed. To meet these demands a multidisciplinary Ergonomics Committee was created in Eletrobras, and effectively established the Ergonomics Management Program in the company; This program is marked by well-defined phases with great success in making use of these studies for other types of corporate activities and also facilitating the program control and its maturity levels, even at a business level.

Ergonomic analysis of primary and assistant surgical roles.

Science.gov (United States)

Zihni, Ahmed M; Cavallo, Jaime A; Ray, Shuddhadeb; Ohu, Ikechukwu; Cho, Sohyung; Awad, Michael M

2016-06-15

Laparoscopic surgery is associated with a high degree of ergonomic stress. However, the stress associated with surgical assisting is not known. In this study, we compare the ergonomic stress associated with primary and assistant surgical roles during laparoscopic surgery. We hypothesize that higher ergonomic stress will be detected in the primary operating surgeon when compared with the surgical assistant. One right-hand dominant attending surgeon performed 698 min of laparoscopic surgery over 13 procedures (222 min primary and 476 min assisting), whereas electromyography data were collected from bilateral biceps, triceps, deltoids, and trapezius muscles. Data were analyzed in 1-min segments. Average muscle activation as quantified by maximal voluntary contraction (%MVC) was calculated for each muscle group during primary surgery and assisting. We compared mean %MVC values with unpaired t-tests. Activation of right (R) biceps and triceps muscle groups is significantly elevated while operating when compared with assisting (R biceps primary: 5.47 ± 0.21 %MVC, assistant: 3.93 ± 0.11, P ergonomic differences between operating and assisting. Surgical assisting was associated with similar and occasionally higher levels of muscle activation compared with primary operating. These findings suggest that surgical assistants face significant ergonomic stress, just as operating surgeons do. Steps must be taken to recognize and mitigate this stress in both operating surgeons and assistants. Copyright © 2016 Elsevier Inc. All rights reserved.

A case study detailing key considerations for implementing a telehealth approach to office ergonomics.

Science.gov (United States)

Ritchie, Catherine L W; Miller, Linda L; Antle, David M

2017-01-01

Telehealth approaches to delivering ergonomics assessment hold great potential to improve service delivery in rural and remote settings. This case study describes a telehealth-based ergonomics service delivery process, and compares in-person and telehealth-based ergonomics approaches at an Alberta-based non-profit advocacy group. This project demonstrates that telehealth approaches to ergonomics do not lead to significantly different scoring outcomes for assessment of ergonomics issues, when compared to in-person assessments. This project also outlines the importance of live real-time video conferencing to improving communication, attaining key assessment information, and demonstrating ergonomic adjustments. However, some key considerations of bandwidth and hardware capabilities need to be taken into account. Key communication strategies are outlined to improve rapport, maintain employee confidentiality, and reduce client anxiety around telehealth ergonomics assessments. This project provides further support for telehealth approaches to office ergonomics, and outlines some key implementation strategies and barriers that should be considered.

Effect of ergonomics training on agreement between expert and nonexpert ratings of the potential for musculoskeletal harm in manufacturing tasks.

Science.gov (United States)

Fethke, Nathan B; Merlino, Linda; Gerr, Fred

2013-12-01

To evaluate the effect of ergonomics training on non-ergonomists' ability to recognize and characterize the potential for musculoskeletal harm in manufacturing tasks. Ergonomics training was delivered to members of a participatory ergonomics team in a manufacturing facility. Before and after training, participatory ergonomics team members and the research team rated the potential for musculoskeletal harm for each of 30 tasks. Measures of agreement included Pearson, concordance, and intraclass correlation coefficients. Measures of agreement generally improved after training. The greatest agreement was observed for ratings of the potential for musculoskeletal harm to the low back. The greatest improvement in agreement was observed for ratings of the potential for musculoskeletal harm to the neck/shoulder. The training seemed to improve non-experts' ability to identify the potential for musculoskeletal harm.

Checklist of Serengeti Ecosystem Grasses.

Science.gov (United States)

Williams, Emma Victoria; Elia Ntandu, John; Ficinski, Paweł; Vorontsova, Maria

2016-01-01

We present the first taxonomic checklist of the Poaceae species of the Serengeti, Tanzania. A review of the literature and herbarium specimens recorded 200 species of grasses, in line with similar studies in other parts of East Africa. The checklist is supported by a total of 939 herbarium collections. Full georeferenced collection data is made available alongside a summary checklist in pdf format. More than a quarter of the species are known from a single collection highlighting the need for further research, especially concerning the rare species and their distribution.

Checklist of Serengeti Ecosystem Grasses

Science.gov (United States)

Ficinski, Paweł; Vorontsova, Maria

2016-01-01

Abstract We present the first taxonomic checklist of the Poaceae species of the Serengeti, Tanzania. A review of the literature and herbarium specimens recorded 200 species of grasses, in line with similar studies in other parts of East Africa. The checklist is supported by a total of 939 herbarium collections. Full georeferenced collection data is made available alongside a summary checklist in pdf format. More than a quarter of the species are known from a single collection highlighting the need for further research, especially concerning the rare species and their distribution. PMID:27226761

A comparison of global rating scale and checklist scores in the validation of an evaluation tool to assess performance in the resuscitation of critically ill patients during simulated emergencies (abbreviated as "CRM simulator study IB").

Science.gov (United States)

Kim, John; Neilipovitz, David; Cardinal, Pierre; Chiu, Michelle

2009-01-01

Crisis resource management (CRM) skills are a set of nonmedical skills required to manage medical emergencies. There is currently no gold standard for evaluation of CRM performance. A prior study examined the use of a global rating scale (GRS) to evaluate CRM performance. This current study compared the use of a GRS and a checklist as formal rating instruments to evaluate CRM performance during simulated emergencies. First-year and third-year residents participated in two simulator scenarios each. Three raters then evaluated resident performance in CRM using edited video recordings using both a GRS and a checklist. The Ottawa GRS provides a seven-point anchored ordinal scale for performance in five categories of CRM, and an overall performance score. The Ottawa CRM checklist provides 12 items in the five categories of CRM, with a maximum cumulative score of 30 points. Construct validity was measured on the basis of content validity, response process, internal structure, and response to other variables. T-test analysis of Ottawa GRS scores was conducted to examine response to the variable of level of training. Intraclass correlation coefficient (ICC) scores were used to measure inter-rater reliability for both scenarios. Thirty-two first-year and 28 third-year residents participated in the study. Third-year residents produced higher mean scores for overall CRM performance than first-year residents (P CRM checklist (P CRM checklist. Users indicated a strong preference for the Ottawa GRS given ease of scoring, presence of an overall score, and the potential for formative evaluation. Construct validity seems to be present when using both the Ottawa GRS and CRM checklist to evaluate CRM performance during simulated emergencies. Data also indicate the presence of moderate inter-rater reliability when using both the Ottawa GRS and CRM checklist.

Ergonomic study and static analysis for new design of electric scooter

Science.gov (United States)

Fadzly, M. K.; Munirah, Anis; Shayfull, Z.; Saad, Mohd Sazli

2017-09-01

The purposes of this project are to design and diversify the function of a battery powered scooter frame which is more practical for the human factor in ergonomic and optimum design. The new design is based on ideas which are studied from existing scooter frame, United States Patent design and European States International Patent design. The final idea of concept design for scooter frame is based on concept chosen from the best characteristics and it is divided into three main difference ideas and the matrix evaluation method is applied. Analysis that applies to frame design, arm, rim and drive train component is based on Cosmos Express program. As a conclusion, the design that is produce are able to carry the maximum also has more practical features in ergonomic view.

The good, the bad, and the future: on the archaeology of ergonomics.

Science.gov (United States)

Moray, Neville

2008-06-01

This article places the 50th anniversary edition of the Human Factors journal in a historical context. It is appropriate to celebrate the 50th anniversary of the founding of Human Factors and the Human Factors and Ergonomics Society, but in so doing, we celebrate only the recent history of ergonomics. By digging into the history of ergonomics, we can better understand the evolution of method, practice, and concepts in the human factors discipline. One develops a greater admiration for early practitioners of human factors and ergonomics, as well as the importance of history. Some satisfaction about the rise, evolution, and fall of ergonomic ideas is justified. "If I have seen further..." We can better define the starting point for the next 50 years.

System ergonomics as an approach to improve human reliability

International Nuclear Information System (INIS)

Bubb, H.

1988-01-01

The application of system technics on ergonomical problems is called system ergonomics. This enables improvements of human reliability by design measures. The precondition for this is the knowledge of how information processing is performed by man and machine. By a separate consideration of sensory processing, cognitive processing, and motory processing it is possible to have a more exact idea of the system element 'man'. The system element 'machine' is well described by differential equations which allow an ergonomical assessment of the manouverability. The knowledge of information processing of man and machine enables a task analysis. This makes appear on one hand the human boundaries depending on the different properties of the task and on the other hand suitable ergonomical solution proposals which improve the reliability of the total system. It is a disadvantage, however, that the change of human reliability by such measures may not be quoted numerically at the moment. (orig.)

Standardization of Safety Checklists for Sport Fields in Schools

Directory of Open Access Journals (Sweden)

S. Arghami

2015-01-01

Full Text Available Introduction: Nowadays in all human societies, sport is considered as a human-training matter, which often occurs in sport fields. Many people, including students in schools, occasionally deal with these fields. Therefore, a standard tool is required to frequently inspection of sport fields. The aim of this study was to standardize checklists for sport fields in schools. .Material and Method: This study is a kind of tool and technique evaluation was done in Zanjan in 2013. The studied population included indoor and outdoor sport fields in governmental boys’ high schools in Zanjan city. The checklists’ items selected based on existing regulations, standards and relevant studies. Standardization of all tools was done applying the face and content validity and reliability tests. .Result: The primary checklist for outdoor sport fields in high schools, which considered by the expert panel, consisted of 75 items. Based on CVI (2 to 3.9 and CVR (.5 to .78, modifications were done and 6 more items were added. And the same process for the primary checklist for outdoor sports fields (85 items was repeated. Based on CVI (2 to 3.9 and CVR (.5 to .78, items increased to 92.  .Conclusion: The safety checklist for sport fields in schools are matched with the properties of them. The safety checklist developed in this study has an acceptable reliability and validity for useful applying in sport field inspections.

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk.

Science.gov (United States)

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Among 123 jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented.

Assessment of office furniture and knowledge of work ergonomics ...

African Journals Online (AJOL)

Background: Poor posture when maintained for a long period can result in musculoskeletal injuries and deformities. Aims: This study aimed at investigating the knowledge of work ergonomics among bank workers, and the ergonomic compliance of office furniture used in some banks, in Enugu metropolis. Methods: This is a ...

ERGONOMICS AND ROAD SAFETY

NARCIS (Netherlands)

BROOKHUIS, K; BROWN, [No Value

1992-01-01

Modifications to the design of vehicles and road infrastructures have improved road safety significantly over the past decades, but all such developments depend upon user acceptance and institutional backing for their success. New R&D programmes combining ergonomic and engineering approaches are

Ergonomic work analysis: A case study of bus drivers in the private collective transportation sector.

Science.gov (United States)

Araújo, Adolfo Vicente; Arcanjo, Gemima Santos; Fernandes, Haroldo; Arcanjo, Georgia Santos

2018-05-03

The collective transportation system is essential to reduce the number of automobiles in the roads. Concerns exist related to quality, comfort and safety of bus driver's workstations. The objective of this study was to improve the driver's workstation in the private collective transportation sector by analyzing ergonomic practices using the Ergonomic Work Analysis (EWA). The EWA was chosen because it seeks to evaluate the labor condition as it relates to the psychophysiological conditions of workers, it complies with regulatory standard 17 (NR17). To identify driver concerns, interviews and questionnaires were administered. The workstation and worker routines were observed. The analysis revealed that the largest number of complaints related to noise, display light and location of the passenger identifier device. Drivers reported discomfort in the knees and lower back. Recommendations were made to improve the workstation and change the routine to minimize the discomfort and ergonomic risk factors.

'1966 and all that': Trends and developments in UK ergonomics during the 1960s.

Science.gov (United States)

Waterson, Patrick; Eason, Ken

2009-11-01

The 1960s represents a key decade in the expansion of ergonomics within the UK. This paper reviews trends and developments that emerged out of the 1960s and compares these with ergonomics research and practice today. The focus in particular is on the expansion of ergonomics as a discipline within industry, as well as more specific topics, such as the emergence of areas of interest, for example, computers and technology, automation and systems ergonomics and consumer ergonomics. The account is illustrated with a detailed timeline of developments, a set of industrial case studies and the contents of important publications during the decade. A key aim of the paper is to provide the opportunity to reflect on the past and the implications this may have for future directions for ergonomics within the UK. The paper provides practitioners with an insight into the development of ergonomics in the UK during one of the most important decades of its history. This is especially relevant given the fact that in 2009 the Ergonomics Society celebrates its 60th anniversary.

Impact of Checklist Use on Wellness and Post-Elective Surgery Appointments in a Veterinary Teaching Hospital.

Science.gov (United States)

Ruch-Gallie, Rebecca; Weir, Heather; Kogan, Lori R

Cognitive functioning is often compromised with increasing levels of stress and fatigue, both of which are often experienced by veterinarians. Many high-stress fields have implemented checklists to reduce human error. The use of these checklists has been shown to improve the quality of medical care, including adherence to evidence-based best practices and improvement of patient safety. Although it has been recognized that veterinary medicine would likely demonstrate similar benefits, there have been no published studies to date evaluating the use of checklists for improving quality of care in veterinary medicine. The purpose of the current study was to evaluate the impact of checklists during wellness and post-elective surgery appointments conducted by fourth-year veterinary students within their Community Practice rotation at a US veterinary teaching hospital. Students were randomly assigned to one of two groups: those who were specifically asked to use the provided checklists during appointments, and those who were not asked to use the checklists but had them available. Two individuals blinded to the study reviewed the tapes of all appointments in each study group to determine the amount and type of medical information offered by veterinary students. Students who were specifically asked to use the checklists provided significantly more information to owners, with the exception of keeping the incision clean. Results indicate the use of checklists helps students provide more complete information to their clients, thereby potentially enhancing animal care.

Application of a mathematical model for ergonomics in lean manufacturing.

Science.gov (United States)

Botti, Lucia; Mora, Cristina; Regattieri, Alberto

2017-10-01

The data presented in this article are related to the research article "Integrating ergonomics and lean manufacturing principles in a hybrid assembly line" (Botti et al., 2017) [1]. The results refer to the application of the mathematical model for the design of lean processes in hybrid assembly lines, meeting both the lean principles and the ergonomic requirements for safe assembly work. Data show that the success of a lean strategy is possible when ergonomics of workers is a parameter of the assembly process design.

Ergonomics in the licensing and evaluation of nuclear reactors control room; A ergonomia no licenciamento e na avaliacao de salas de controle de reatores nucleares

Energy Technology Data Exchange (ETDEWEB)

Santos, Isaac Jose Antonio Luquetti dos [Instituto de Engenharia Nuclear (IEN), Rio de Janeiro, RJ (Brazil); Vidal, Mario Cesar Rodriguez [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia de Producao

2002-07-01

A nuclear control room is a complex system that controls a thermodynamic process used to produce electrical energy. The operators interact with the control room through interfaces that have significant implications to nuclear plant safety and influence the operator activity. The TMI (Three Mile Island) accident demonstrated that only the anthropometric aspects were not enough for an adequate nuclear control room design. The studies showed that the accident was aggravated because the designers had not considered adequately human factor aspects. After TMI accident, the designers introduce in the nuclear control room development only human factors standards and human factors guidelines. The ergonomics approaches was not considered. Our objective is introduce in nuclear control room design and nuclear control room evaluation, a methodology that. includes human factors standards, human factors guidelines and ergonomic approaches, the operator activity analysis. (author)

Decision making models and human factors: TOPSIS and Ergonomic Behaviors (TOPSIS-EB

Directory of Open Access Journals (Sweden)

Mohammad

2017-02-01

Full Text Available An effective safety management requires attention to human factors as well as system compo-nents which make risky or safe situations at technical components. This study evaluates and ana-lyze ergonomic behaviors in order to select the best work shift group in an Iranian process in-dustry, in 2010.The methodology was based on the Ergonomic Behavior Sampling (EBS, and TOPSIS method. After specifying the unergonomic behaviors and with reference to the results of a pilot study, a sample of 1755 was determined, with a sampling accuracy of 5% and confi-dence level of 95%. However, in order to gain more confidence, 2631 observations were collect-ed. The results indicate that 43.6% of workers’ behaviors were unergonomic. The most frequent unergonomic behavior was amusing of legs while load lifting with 83.01% of total unergonomic behaviors observations. Using TOPSIS method, the most effective shift group and the least at-tractive alternatives for intervention were selected in this company. Findings declare high number of unergonomic behaviors. Catastrophic consequences of accidents in petrochemical industry ne-cessitate attention to workers’ ergonomic behaviors in the workplace and promotion of them.

Integrating ergonomics into production system development--the Volvo Powertrain case.

Science.gov (United States)

Neumann, W Patrick; Ekman, Marianne; Winkel, Jørgen

2009-05-01

Understanding the barriers and assists to integrating ergonomics into production system design remains a research issue. An action research case study at Volvo Powertrain/Sweden was conducted. Researchers worked collaboratively with the firm in efforts to improve the company's ability to handle ergonomics in their daily work of improving and developing production systems. Researchers observed and reflected collectively on the change process using field notes and recordings to support their observations. Observed integration barriers included both individual level issues like life events, and organisational aspects such as communication barriers between groups or assignment of tasks to people not involved in decision-making. Observed assists included the 'political reflective navigation' (c.f. Broberg, O., Hermund, I., 2004. The OHS consultant as a 'political reflective navigator' in technological change processes. International Journal of Industrial Ergonomics 33 (4), 315-326) by the project owner to find new ways to overcome barriers and anchor ergonomics into the organisation. While special 'ergonomics' groups did not survive long, progress was observed in including ergonomics in regular design groups. A cross-functional workshop that fostered discussion across organisational boundaries helped shift focus from retrofitting systems to future production systems and improve engagement of engineering teams. Progress was marked by both success and setbacks and full integration appears to require more than 2 years time. It is concluded that support by senior managers should include succession planning for personnel that are key to the change effort.

Development of an ergonomics guideline for the furniture manufacturing industry.

Science.gov (United States)

Mirka, Gary A

2005-03-01

Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

From an urologist view: are we safe with endoscopic surgery? Overview of ergonomic problems encountered by the urologist during video endoscopic surgery.

Science.gov (United States)

Sataa, Sallami; Benzarti, Aida; Ben Jemaa, Abdelmajid

2012-12-01

The importance of minimally invasive surgery in urology has constantly increased in the last 20 years. Endoscopic resection of prostate and bladder tumors is actually a gold standard with many advantages for patients. To analyze the problems related to the ergonomic conditions faced by urologist during video endoscopic surgery by review of the recent literature. All evidence-based experimental ergonomic studies conducted in the fields of urology endoscopic surgery and applied ergonomics for other professions working with a display were identified by PubMed searches. Data from ergonomic studies were evaluated in terms of efficiency as well as comfort and safety aspects. Constraint postures for urologists are described and ergonomic requirements for optimal positions are discussed. The ergonomics of urological endoscopic surgery place urologists at risk for potential injury. The amount of neck flexion or extension, the amount of shoulder girdle adduction or abduction used, and stability of the upper extremities during surgery; which are maintained in a prolonged static posture; are the main risk factors. All these constraints may lead to muscle and joint fatigue, pain, and eventual musculoskeletal injury. Moreover, these issues may impact surgical accuracy. Urologist posture, operating period, training are important ergonomic factor during video surgery to prevent musculoskeletal disorders.

Musculoskeletal Injuries and Their Associated Risk Factors

Directory of Open Access Journals (Sweden)

M Jahangiri

2012-01-01

Full Text Available Background and aims :Prevalence of musculoskeletal disorders (MSDs is high among office workers. Long time seated posture, working with computer, repetitive movements and inappropriate environmental conditions may have causal effects in these disorders. High prevalence rate of MSDs makes ergonomics assessment and working conditions improvement necessary. Designing an assessment checklist and calculating ergonomics indices can be useful in this evaluation. This study was conducted with the objectives of determination of prevalence rate, ergonomics assessment of working conditions and determination of factors associated with MSDs among office workers. Methods:In this study 400 randomly selected office workers participated. Nordic musculoskeletal disorders questionnaire was applied to determine prevalence rate of MSDs. Working conditions were assessed by the designed ergonomics checklist and ergonomic risk factors were identified. Data were analyzed using statistical tests including t-test, Chi-square and test of proportion by SPSS software (Version 12.0. Results:The highest prevalence rates of MSDs were reported in lower back and neck regions (49% and 47%, respectively. Statistical analysis revealed that there were significant association between occurrence of MSDs and calculated ergonomics indices (P<0.05. The mean of ergonomics index among those suffered from MSDs were less than other healthy workers indicating inappropriate ergonomics conditions. Calculation of OR also revealed that ergonomics conditions was associated with MSDs occurrence among workers (P<0.05. Totally, 53.3% of the office workers studied had poor working conditions. Awkward working posture and inappropriate workstation design were recognized as the main risk factors in the office workplace.  Conclusion:Most ergonomics problems were originated from bad postures and inappropriate design of workstation. Any interventional program for working conditions improvement should

Comparative assessment of surgeons' task performance and surgical ergonomics associated with conventional and modified flank positions: a simulation study.

Science.gov (United States)

Fan, Yu; Kong, Gaiqing; Meng, Yisen; Tan, Shutao; Wei, Kunlin; Zhang, Qian; Jin, Jie

2014-11-01

Flank position is extensively used in retroperitoneoscopic urological practice. Most surgeons follow the patients' position in open approaches. However, surgical ergonomics of the conventional position in the retroperitoneoscopic surgery is poor. We introduce a modified position and evaluated task performance and surgical ergonomics of both positions with simulated surgical tasks. Twenty-one novice surgeons were recruited to perform four tasks: bead transfer, ring transfer, continuous suturing, and cutting a circle. The conventional position was simulated by setting an endo-surgical simulator parallel to the long axis of a surgical desk. The modified position was simulated by rotating the simulator 30° with respect to the long axis of the desk. The outcome measurements include task performance measures, kinematic measures for body alignment, surface electromyography, relative loading between feet, and subjective ratings of fatigue. We observed significant improvements in both task performance and surgical ergonomics parameters under the modified position. For all four tasks, subjects finished tasks faster with higher accuracy (p ergonomics part: (1) The angle between the upper body and the head was decreased by 7.4 ± 1.7°; (2) The EMG amplitude collected from shoulders and left lumber was significantly lower (p ergonomics. With a simulated surgery, we demonstrated that our modified position could significantly improve task performance and surgical ergonomics. Further studies are still warranted to validate these benefits for both patients and surgeons.

TO STUDY THE ROLE OF ERGONOMICS IN THE MANAGEMENT OF COMPUTER VISION SYNDROME

Directory of Open Access Journals (Sweden)

Anshu

2016-03-01

Full Text Available INTRODUCTION Ergonomics is the science of designing the job equipment and workplace to fit the worker by obtaining a correct match between the human body, work related tasks and work tools. By applying the science of ergonomics we can reduce the difficulties faced by computer users. OBJECTIVES To evaluate the efficacy of tear substitutes and the role of ergonomics in the management of Computer Vision Syndrome. Development of counseling plan, initial treatment plan, prevent complications and educate the subjects about the disease process and to enhance public awareness. MATERIALS AND METHODS A minimum of 100 subjects were selected randomly irrespective of gender, place and nature of computer work & ethnic differences. The subjects were between age group of 10-60 years who had been using the computer for a minimum of 2 hours/day for atleast 5-6 days a week. The subjects underwent tests like Schirmer's, Test film breakup time (TBUT, Inter Blink Interval and Ocular surface staining. A Computer Vision score was taken out based on 5 symptoms each of which was given a score of 2. The symptoms included foreign body sensation, redness, eyestrain, blurring of vision and frequent change in refraction. The score of more than 6 was treated as Computer Vision syndrome and the subjects underwent synoptophore tests and refraction. RESULT In the present study where we had divided 100 subjects into 2 groups of 50 each and given tear substitutes only in one group and ergonomics was considered with tear substitutes in the other. We saw that there was more improvement after 4 weeks and 8 weeks in the group taking lubricants and ergonomics into consideration than lubricants alone. More improvement was seen in eyestrain and blurring (P0.05. CONCLUSION Advanced training in proper computer usage can decrease discomfort.

Ergonomics as a missing part of sustainability.

Science.gov (United States)

Pavlovic-Veselinovic, Sonja

2014-01-01

In the last twenty years, terms such as sustainable development, environmental protection, and sustainable design have been widely exploited, often without justification. Does ergonomics have a legitimate need or right to use these terms and to be the part of the process to which they refer? This paper discusses the relationship between ergonomics and the concept of sustainable development and its three elements of sustainability (environmental, social and economic), as the steps ergonomists need to take to secure and strengthen the influence in sustainability topics.

Staff supplement to the draft report on human engineering guide to control room evaluation: response to comments, sample checklist, draft systems review guidelines, and evaluation procedures

International Nuclear Information System (INIS)

1981-03-01

This staff supplement to Draft Report NUREG/CR-1580, Human Engineering Guide to Control Room Evaluation, provides staff responses to comments on the draft report and supplemental material not provided in the draft report. The supplemental material includes new draft guidelines for the systems review of nuclear power plant control rooms and sample checklists and corresponding human engineering guidelines

The stage of change approach for implementing ergonomics advice - Translating research into practice.

Science.gov (United States)

Rothmore, Paul; Aylward, Paul; Oakman, Jodi; Tappin, David; Gray, Jodi; Karnon, Jonathan

2017-03-01

The Stage of Change (SOC) approach has been proposed as a method to improve the implementation of ergonomics advice. However, despite evidence for its efficacy there is little evidence to suggest it has been adopted by ergonomics consultants. This paper investigates barriers and facilitators to the implementation, monitoring and effectiveness of ergonomics advice and the adoption of the SOC approach in a series of focus groups and a subsequent survey of members of the Human Factors Societies of Australia and New Zealand. A proposed SOC assessment tool developed for use by ergonomics practitioners is presented. Findings from this study suggest the limited application of a SOC based approach to work-related musculoskeletal injury prevention by ergonomics practitioners is due to the absence of a suitable tool in the ergonomists' repertoire, the need for training in this approach, and their limited access to relevant research findings. The final translation of the SOC assessment tool into professional ergonomics practice will require accessible demonstration of its real-world usability to practitioners and the training of ergonomics practitioners in its application. Copyright © 2016 Elsevier Ltd. All rights reserved.

Swedish Sonographers' perceptions of ergonomic problems at work and their suggestions for improvement.

Science.gov (United States)

Gemark Simonsen, Jenny; Gard, Gunvor

2016-09-15

Sonographers' perceptions of ergonomic and work-related pain problems at work have so far mostly been researched in quantitative studies by questionnaires. There is a need of experience-based research to deepen the knowledge about how sonographers perceive ergonomic problems at work. Therefore, the aim of this qualitative study was to describe sonographers' perceptions of ergonomic problems at work, and their suggestions for improvement strategies. Twenty-two female sonographers were individually interviewed regarding different aspects of their physical working environment. Content analysis was applied. The sonographers perceived different ergonomic problems in their working environment, but to offer patient comfort and to obtain the best possible images were often prioritized over working posture. Echocardiography was considered demanding as the examination is performed with little variation in posture. Ergonomic improvements included reducing the manual handling of the transducer, optimizing the adjustability of equipment, and taking the patient's physique and health into account. As some examinations were perceived to be more ergonomically demanding, variation between examinations was suggested, however, this requires broader skills. Sonography, especially echocardiography is ergonomically demanding but the improvement strategies suggested were perceived useful and applicable.

The effect of ergonomic laparoscopic tool handle design on performance and efficiency.

Science.gov (United States)

Tung, Kryztopher D; Shorti, Rami M; Downey, Earl C; Bloswick, Donald S; Merryweather, Andrew S

2015-09-01

Many factors can affect a surgeon's performance in the operating room; these may include surgeon comfort, ergonomics of tool handle design, and fatigue. A laparoscopic tool handle designed with ergonomic considerations (pistol grip) was tested against a current market tool with a traditional pinch grip handle. The goal of this study is to quantify the impact ergonomic design considerations which have on surgeon performance. We hypothesized that there will be measurable differences between the efficiency while performing FLS surgical trainer tasks when using both tool handle designs in three categories: time to completion, technical skill, and subjective user ratings. The pistol grip incorporates an ergonomic interface intended to reduce contact stress points on the hand and fingers, promote a more neutral operating wrist posture, and reduce hand tremor and fatigue. The traditional pinch grip is a laparoscopic tool developed by Stryker Inc. widely used during minimal invasive surgery. Twenty-three (13 M, 10 F) participants with no existing upper extremity musculoskeletal disorders or experience performing laparoscopic procedures were selected to perform in this study. During a training session prior to testing, participants performed practice trials in a SAGES FLS trainer with both tools. During data collection, participants performed three evaluation tasks using both handle designs (order was randomized, and each trial completed three times). The tasks consisted of FLS peg transfer, cutting, and suturing tasks. Feedback from test participants indicated that they significantly preferred the ergonomic pistol grip in every category (p < 0.05); most notably, participants experienced greater degrees of discomfort in their hands after using the pinch grip tool. Furthermore, participants completed cutting and peg transfer tasks in a shorter time duration (p < 0.05) with the pistol grip than with the pinch grip design; there was no significant difference between completion

Meeting diversity in ergonomics

NARCIS (Netherlands)

Looze, M.P. de; Pikaar, R.

2006-01-01

The plenary lectures from the 16th World Congress on Ergonomics, Maastricht, July 10-14, 2006, have been documented in this special issue. Its theme was ‘Meeting Diversity'. The contributions, ranging from scientific papers to technical notes or short statements, cover different aspects of the

Ergonomics standards and guidelines for computer workstation design and the impact on users' health - a review.

Science.gov (United States)

Woo, E H C; White, P; Lai, C W K

2016-03-01

This paper presents an overview of global ergonomics standards and guidelines for design of computer workstations, with particular focus on their inconsistency and associated health risk impact. Overall, considerable disagreements were found in the design specifications of computer workstations globally, particularly in relation to the results from previous ergonomics research and the outcomes from current ergonomics standards and guidelines. To cope with the rapid advancement in computer technology, this article provides justifications and suggestions for modifications in the current ergonomics standards and guidelines for the design of computer workstations. Practitioner Summary: A research gap exists in ergonomics standards and guidelines for computer workstations. We explore the validity and generalisability of ergonomics recommendations by comparing previous ergonomics research through to recommendations and outcomes from current ergonomics standards and guidelines.

Ergonomics and comfort in lawn mower handle positioning: An evaluation of handle geometry.

Science.gov (United States)

Lowndes, Bethany R; Heald, Elizabeth A; Hallbeck, M Susan

2015-11-01

Hand operation accompanied with any combination of large forces, awkward positions and repetition may lead to upper limb injury or illness and may be exacerbated by vibration. Commercial lawn mowers expose operators to these factors during actuation of hand controls and therefore may be a health concern. A nontraditional lawn mower control system may decrease upper limb illnesses and injuries through more neutral hand and body positioning. This study compared maximum grip strength in twelve different orientations (3 grip spans and 4 positions) and evaluated self-described comfortable handle positions. The results displayed force differences between nontraditional (X) and both vertical (V) and pistol (P) positions (p < 0.0001) and among the different grip spans (p < 0.0001). Based on these results, recommended designs should incorporate a tilt between 45 and 70°, handle rotations between 48 and 78°, and reduced force requirements or decreased grip spans to improve user health and comfort. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics issues in national identity card for homeland security.

Science.gov (United States)

Yeow, Paul H P; Yuen, Y Y; Loo, W H

2013-09-01

Ever since the 9/11 terrorist attack, many countries are considering the use of smart national identity card (SNIC) which has the ability to identify terrorists due to its biometric verification function. However, there are many ergonomics issues in the use of SNIC, e.g. card credibility. This research presents a case study survey of Malaysian users. Although most citizens (>96%) own MyKad (Malaysia SNIC), many do not carry it around and use its applications. This defeats one of its main purposes, i.e. combating terrorism. Thus, the research investigates ergonomics issues affecting the citizens' Intention to Use (ITU) MyKad for homeland security by using an extended technology acceptance model. Five hundred questionnaires were collected and analysed using structural equation modelling. Results show that perceived credibility and performance expectancy are the key issues. The findings provide many countries with insights into methods of addressing ergonomics issues and increasing adoption of SNIC for homeland security. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics Contribution in Maintainability

Science.gov (United States)

Teymourian, Kiumars; Seneviratne, Dammika; Galar, Diego

2017-09-01

The objective of this paper is to describe an ergonomics contribution in maintainability. The economical designs, inputs and training helps to increase the maintainability indicators for industrial devices. This analysis can be helpful, among other cases, to compare systems, to achieve a better design regarding maintainability requirements, to improve this maintainability under specific industrial environment and to foresee maintainability problems due to eventual changes in a device operation conditions. With this purpose, this work first introduces the notion of ergonomics and human factors, maintainability and the implementation of assessment of human postures, including some important postures to perform maintenance activities. A simulation approach is used to identify the critical posture of the maintenance personnel and implements the defined postures with minimal loads on the personnel who use the equipment in a practical scenario. The simulation inputs are given to the designers to improve the workplace/equipment in order to high level of maintainability. Finally, the work concludes summarizing the more significant aspects and suggesting future research.

Ergonomic practices within patient care units are associated with musculoskeletal pain and limitations

Science.gov (United States)

Dennerlein, Jack T.; Hopcia, Karen; Sembajwe, Grace; Kenwood, Christopher; Stoddard, Anne M.; Tveito, T. Helene; Hashimoto, Dean M.; Sorensen, Glorian

2013-01-01

Background With the high prevalence of musculoskeletal disorders (MSDs) for patient care unit workers, prevention efforts through ergonomic practices within units may be related to symptoms associated with typical work-related MSDs. Methods We completed a cross-sectional survey of patient care workers (n=1572) in two large academic hospitals in order to evaluate relationships between self-reported musculoskeletal pain, work interference due to this pain, and limitations during activities of daily living (functional limitations) and with ergonomic practices and other organizational policy and practices metrics within the unit. Bivariate and multiple logistic regression analyses tested the significance of these associations. Results Prevalence of self-reported musculoskeletal symptoms in the past 3-months was 74% with 53% reporting pain in the low back. 32.8% reported that this pain interfered with their work duties and 17.7% reported functional limitations in the prior week. Decreased ergonomic practices were significantly associated with reporting pain in four body areas (low back, neck/shoulder, arms, and lower extremity) in the previous 3-months, interference with work caused by this pain, symptom severity and limitations in completing activities of daily living in the past week. Except for low back pain and work interference, these associations remained significant when psychosocial covariates such as psychological demands were included in multiple logistic regressions, Conclusions Ergonomic practices appear to be associated with many of the musculoskeletal symptoms denoting their importance for prevention efforts in acute health care settings. PMID:22113975

A 'paperless' wall-mounted surgical safety checklist with migrated leadership can improve compliance and team engagement.

Science.gov (United States)

Ong, Aaron Pin Chien; Devcich, Daniel A; Hannam, Jacqueline; Lee, Tracey; Merry, Alan F; Mitchell, Simon J

2016-12-01

Outcome benefits of using the WHO Surgical Safety Checklist rely on compliance with checklist administration. To evaluate engagement of operating room (OR) subteams (anaesthesia, surgery and nursing), and compliance with administering checklist domains (Sign In, Time Out and Sign Out) and checklist items, after introducing a wall-mounted paperless checklist with migration of process leadership (Sign In, Time Out and Sign Out led by anaesthesia, surgery and nursing, respectively). This was a pre-post observational study in which 261 checklist domains in 111 operations were observed 2 months after changing the checklist administration paradigm. Compliance with administration of the checklist domains and individual checklist items was recorded, as was the number of OR subteams engaged. Comparison was made with 2013 data from the same OR suite prior to the paradigm change. Data are presented as 2013 versus the present study. The Sign In, Time Out and Sign Out domains were administered in 96% vs 98% (p=0.69), 99% vs 99% (p=1.00) and 22% vs 84% (pImprovements in team engagement and compliance with administering checklist items followed introduction of migrated leadership of checklist administration and a wall-mounted checklist. This paradigm change was relatively simple and inexpensive. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Facilitators & Barriers to the Adoption of Ergonomic Solutions in Construction

Science.gov (United States)

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Barnidge, Ellen; Weaver, Nancy; Evanoff, Bradley A.

2017-01-01

Background Rates of musculoskeletal disorders in construction remain high. Few studies have described barriers and facilitators to the use of available ergonomic solutions. This paper describes these barriers and facilitators and their relationship to the level of adoption. Methods Three analysts rated 16 proposed ergonomic solutions from a participatory ergonomics study and assessed the level of adoption, six adoption characteristics, and identified the category of adoption from a theoretical model. Results Twelve solutions were always or intermittently used and were rated positively for characteristics of relative advantage, compatibility with existing work processes, and trialability. Locus of control (worker vs. contractor) was not related to adoption. Simple solutions faced fewer barriers to adoption than those rated as complex. Conclusions Specific adoption characteristics can help predict the use of new ergonomic solutions in construction. Adoption of complex solutions must involve multiple stakeholders, more time, and shifts in culture or work systems. PMID:28195660

Ergonomics and regulatory politics: the Washington State case.

Science.gov (United States)

Silverstein, Michael

2007-05-01

Every year in the State of Washington more than 50,000 workers experience a work related musculoskeletal disorder (WMSD), making up more than 30% of all worker compensation cases. In 2000, the Washington State Department of Labor and Industries (L&I) adopted a workplace ergonomics rule requiring employers to reduce worker exposure to hazards that cause or contribute to WMSDs. In 2003, the ergonomics rule was repealed by a margin of 53.5-46.5 in a statewide voter initiative. The official rulemaking record of approximately 100,000 pages, along with supplementary published and unpublished material, was reviewed. The relationship between scientific deliberation and the public policy process in adopting and repealing the ergonomics rule was assessed and described. The deliberative features of the regulatory, judicial, legislative, and ballot processes were compared. The ergonomics rule was successful in the regulatory and legal arenas where the process was most transparent and open to public involvement, differing views could be presented fully, and decision makers were expected to explain their decisions in light of the record. The rule fared most poorly in the legislature and at the ballot box when these features were lost and where considered deliberation was replaced by unconstrained political conflict. Additional checks and balances are needed.

Ergonomic applications to dental practice

Directory of Open Access Journals (Sweden)

Shipra Gupta

2011-01-01

Full Text Available The term "work-related musculoskeletal disorders (WMSDs," refers to musculoskeletal disorders to which the work environment contributes significantly, or to musculoskeletal disorders that are made worse or longer lasting by work conditions or workplace risk factors. In recent years, there has been an increase in reporting WMSDs for dental persons. Risk factors of WMSDs with specific reference to dentistry include - stress, poor flexibility, improper positioning, infrequent breaks, repetitive movements, weak postural muscles, prolonged awkward postures and improper adjustment of equipment. Ergonomics is the science of designing jobs, equipment and workplaces to fit workers. Proper ergonomic design is necessary to prevent repetitive strain injuries, which can develop over time and can lead to long-term disability. In this article, 20 strategies to prevent WMSDs in the dental operatory are discussed.

Safety voice for ergonomics (SAVE project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices

Directory of Open Access Journals (Sweden)

Laurel D. Kincl

2016-04-01

Full Text Available Abstract Background Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack “soft skills” training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program – SAfety Voice for Ergonomics – strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Methods/design Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group: (1 ergonomics training only, (2 safety voice training only, (3 combined ergonomics and safety voice training, or (4 control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include

Safety voice for ergonomics (SAVE) project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices.

Science.gov (United States)

Kincl, Laurel D; Anton, Dan; Hess, Jennifer A; Weeks, Douglas L

2016-04-27

Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack "soft skills" training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program - SAfety Voice for Ergonomics - strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group): (1) ergonomics training only, (2) safety voice training only, (3) combined ergonomics and safety voice training, or (4) control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include: musculoskeletal symptoms, general health perceptions, knowledge of

[The role of ergonomics in occupational health - past and future].

Science.gov (United States)

Izumi, Hiroyuki

2013-10-01

The aim of working condition and ergonomics is to control the task method and condition for the best productive activity with the highest efficiency and sustainability. The Principles of Scientific Management by Frederick Winslow Taylor and its criticism by Gito Teruoka, the 1st director of The Institute for Science of Labour, are introduced for a better understanding of work condition and ergonomics in this article. Occupational physician have a duty to control working method and condition to reduce the health hazards induced by job duty. Not only the technical knowledge of medicine, but also a fundamental knowledge of manufacturing is needed for the occupational physician. The development of tools for early detection of health hazards and workload evaluation, the introduction of work management systems with cooperation between occupational physicians and technical experts of manufacturing are needed for effective control of the workplace. The strengthening of the Industrial Safety and Health Law should help to drive these improvements.

The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

Science.gov (United States)

Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

Editorial | Scott | Ergonomics SA

African Journals Online (AJOL)

Ergonomics SA. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 23, No 1 (2011) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT ...

The impact of ergonomics

NARCIS (Netherlands)

Koningsveld, E.A.P.

2009-01-01

Ergonomists offer services to organizations. The goal of their work is to provide safety and health at work in combination with a sound human performance. However, the impact of ergonomics efforts is not always as good as ergonomists and human factors specialists want. This chapter aims to support

Ergonomics as a tool to improve the sustainability of the workforce.

Science.gov (United States)

Meyer, Felipe; Eweje, Gabriel; Tappin, David

2017-01-01

The sustainability of the workforce is threatened due to working conditions. One of the reasons for this is an imbalance between the working conditions and the capacity of the workers. The objective of the paper, based on a literature review, is to explore the relationship between two main concepts, beginning with sustainability, and finished with ergonomics. Based on that relationship, determine if ergonomics could be helpful to improve the sustainability of the workforce. Literature review was based on two keywords: sustainability and ergonomics. The focus was on create a theoretical path between these two concepts. The literature review draws on 100 journal articles, books, conference proceedings, thesis and reports. The results of the literature review highlights that an ergonomics approach is helpful and appropriate to determine the mismatch between people capacity and system demand. In that sense, the literature review reveals that both disciplines, ergonomics and sustainability, share the same principles and that the mix of both has significant potential. However, the literature also shows a lack of empirical information that proves that potential. The review first posits that sustainability principles could be helpful to improve the working conditions, and second, that an ergonomics approach provides information related with working conditions, organizations' problems and the needs of workers that would be helpful to create a sustainability workforce.

Poor sitting posture and a heavy schoolbag as contributors to musculoskeletal pain in children: an ergonomic school education intervention program

Science.gov (United States)

Syazwan, AI; Azhar, MN Mohamad; Anita, AR; Azizan, HS; Shaharuddin, MS; Hanafiah, J Muhamad; Muhaimin, AA; Nizar, AM; Rafee, B Mohd; Ibthisham, A Mohd; Kasani, Adam

2011-01-01

Objectives The purpose of this study was to evaluate a multidisciplinary, interventional, ergonomic education program designed to reduce the risk of musculoskeletal problems by reducing schoolbag weight and correcting poor sitting posture. Methods Data were collected twice before and twice following intervention using the Standardized Nordic Body Map Questionnaire, a rapid upper limb assessment for posture evaluation, and schoolbag weight measurement in children aged 8 and 11 years attending two schools within the central region of Malaysia. Results Students who received the ergonomic intervention reported significant improvements in their sitting posture in a classroom environment and reduction of schoolbag weight as compared with the controls. Conclusion A single-session, early intervention, group ergonomics education program for children aged 8 and 11 years is appropriate and effective, and should be considered as a strategy to reduce musculoskeletal pain among schoolchildren in this age group. PMID:22003301

Ergonomics in Healthcare system-Human Factors models: a review article

Directory of Open Access Journals (Sweden)

S. Tarzimoghadam

2015-12-01

  Conclusion: Most of the published studies emphasize on application of ergonomic models in healthcare centers since these models may reduce their problems. These ergonomics approaches support patient-centered treatment processes, user-oriented design of medical environments, efficient utilization of resources and increase motivation of clinical staff.

The Physical Demands and Ergonomics of Working with Young Children.

Science.gov (United States)

Gratz, Rene R.; Claffey, Anne; King, Phyllis; Scheuer, Gina

2002-01-01

Examines the physical demands and ergonomic concerns within child care settings. Discusses problem areas and ergonomic recommendations for room design and staff training. Presents important implications for writing job descriptions, determining essential job functions, orienting and training staff, and committing to improving the child care work…

Assessing the suitability of written stroke materials: an evaluation of the interrater reliability of the suitability assessment of materials (SAM) checklist.

Science.gov (United States)

Hoffmann, Tammy; Ladner, Yvette

2012-01-01

Written materials are frequently used to provide education to stroke patients and their carers. However, poor quality materials are a barrier to effective information provision. A quick and reliable method of evaluating material quality is needed. This study evaluated the interrater reliability of the Suitability Assessment of Materials (SAM) checklist in a sample of written stroke education materials. Two independent raters evaluated the materials (n = 25) using the SAM, and ratings were analyzed to reveal total percentage agreements and weighted kappa values for individual items and overall SAM rating. The majority of the individual SAM items had high interrater reliability, with 17 of the 22 items achieving substantial, almost perfect, or perfect weighted kappa value scores. The overall SAM rating achieved a weighted kappa value of 0.60, with a percentage total agreement of 96%. Health care professionals should evaluate the content and design characteristics of written education materials before using them with patients. A tool such as the SAM checklist can be used; however, raters should exercise caution when interpreting results from items with more subjective scoring criteria. Refinements to the scoring criteria for these items are recommended. The value of the SAM is that it can be used to identify specific elements that should be modified before education materials are provided to patients.

The development and validation of an ergonomics index for assessing tractor operator work place

OpenAIRE

Barbieri, Juan Paulo; Schlosser, José Fernando; Farias, Marcelo Silveira de; Negri, Giácomo Müller; Oliveira, Luis Fernando Vargas de

2018-01-01

ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996), which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015) and ABNT ...

ERGONOMICS ABSTRACTS 48983-49619.

Science.gov (United States)

Ministry of Technology, London (England). Warren Spring Lab.

THE LITERATURE OF ERGONOMICS, OR BIOTECHNOLOGY, IS CLASSIFIED INTO 15 AREAS--METHODS, SYSTEMS OF MEN AND MACHINES, VISUAL AND AUDITORY AND OTHER INPUTS AND PROCESSES, INPUT CHANNELS, BODY MEASUREMENTS, DESIGN OF CONTROLS AND INTEGRATION WITH DISPLAYS, LAYOUT OF PANELS AND CONSOLES, DESIGN OF WORK SPACE, CLOTHING AND PERSONAL EQUIPMENT, SPECIAL…

Quality Assessment of Published Articles in Iranian Journals Related to Economic Evaluation in Health Care Programs Based on Drummond's Checklist: A Narrative Review.

Science.gov (United States)

Rezapour, Aziz; Jafari, Abdosaleh; Mirmasoudi, Kosha; Talebianpour, Hamid

2017-09-01

Health economic evaluation research plays an important role in selecting cost-effective interventions. The purpose of this study was to assess the quality of published articles in Iranian journals related to economic evaluation in health care programs based on Drummond's checklist in terms of numbers, features, and quality. In the present review study, published articles (Persian and English) in Iranian journals related to economic evaluation in health care programs were searched using electronic databases. In addition, the methodological quality of articles' structure was analyzed by Drummond's standard checklist. Based on the inclusion criteria, the search of databases resulted in 27 articles that fully covered economic evaluation in health care programs. A review of articles in accordance with Drummond's criteria showed that the majority of studies had flaws. The most common methodological weakness in the articles was in terms of cost calculation and valuation. Considering such methodological faults in these studies, it is anticipated that these studies would not provide an appropriate feedback to policy makers to allocate health care resources correctly and select suitable cost-effective interventions. Therefore, researchers are required to comply with the standard guidelines in order to better execute and report on economic evaluation studies.

The Impact of Ergonomically Designed Workstations on Shoulder EMG Activity during Carpet Weaving

Directory of Open Access Journals (Sweden)

Majid Motamedzade

2014-12-01

Full Text Available Background: The present study aimed to evaluate the biomechanical exposure to the trapezius muscle activity in female weavers for a prolonged period in the workstation A (suggested by previous studies and workstation B (proposed by the present study. Methods: Electromyography data were collected from nine females during four hours for each ergonomically designed workstation at the Ergonomics Laboratory, Hamadan, Iran. The design criteria for ergonomically designed workstations were: 1 weaving height (20 and 3 cm above elbow height for workstations A and B, respectively, and 2 seat type (10° and 0° forwardsloping seat for workstations A and B, respectively. Results: The amplitude probability distribution function (APDF analysis showed that the left and right upper trapezius muscle activity was almost similar at each workstation. Trapezius muscle activity in the workstation A was significantly greater than workstations B (P<0.001. Conclusion: In general, use of workstation B leads to significantly reduced muscle activity levels in the upper trapezius as compared to workstation A in weavers. Despite the positive impact of workstation B in reducing trapezius muscle activity, it seems that constrained postures of the upper arm during weaving may be associated with musculoskeletal symptoms.

Practical use of ergonomics in industrial processes

International Nuclear Information System (INIS)

1976-01-01

Six lectures deal with new developments in the application of ergonomic knowledge, in particular to nuclear technology. All contributions have in common the aspects of analysis and structure of man-machine-systems in which human operators have to process information and have to make decisions. Quoting a lot of examples from a variety of industrial sectors, the article discusses complexes of problems and ways of solving them concerning questions requiring the answer 'yes' or 'no', concerning the dialogue man-computer, the organization of central control mechanisms, the avoidance of human errors, influence of man on system safety, and the rational incorporation of ergonomics in system planning. This publication is meant to be a contribution to extend the knowledge on the organization of work from an ergonomic and engineer/psychological point of view. It is to show how the knowledge of the nature of man can be applied as a systems component in order to make industrial processes safer and more economical, and to entrust man with purposeful and satisfying tasks. (orig./LN) [de

Designing an Ergonomically Correct CNC Workstation on a Shoe String Budget.

Science.gov (United States)

Lightner, Stan

2001-01-01

Describes research to design and construct ergonomically correct work stations for Computer Numerical Control machine tools. By designing ergonomically correct work stations, industrial technology teachers help protect students from repetitive motion injuries. (Contains 12 references.) (JOW)

Ergonomics influence on control room layout

International Nuclear Information System (INIS)

Hartfiel, H.D.

1984-01-01

Nowadays, human factors has become an important aspect of the design of work places. Since the control room in a nuclear power plant is a work place, too, its layout is also influenced by ergonomics. With the KWU control room concept for the 1300 MW PWR as an example, we show how assured and applicable ergonomic findings enter into the control room design. On the basis of general design principles for work places, specific methods for control room planning have been developed. By working with these methods a concept that makes it possible to build a man-machine interface able to fulfill the process control tasks with all their underlying conditions has been derived. (author)

Integrating ergonomics into engineering: Empirical evidence and implications for the ergononomist

DEFF Research Database (Denmark)

Broberg, Ole

2007-01-01

management nor safety organizations expressed any expectations in this area. The study further indicated that effects of ergonomics training in engineering schools were very lim-ited. The engineering cultures in enterprises, together with other organizational factors, are suggested to be of greater......Engineering design is a strong determinant of workplace ergonomics. A survey among 680 engineers in twenty Danish enterprises indicated that engineers are not aware that they influence the work environment of other people. Ergonomics had a low rating among engineers, perhaps because neither...

The development of an ergonomics training program to identify, evaluate, and control musculoskeletal disorders among nursing assistants at a state-run veterans' home.

Science.gov (United States)

Peterson, Erica L; McGlothlin, James D; Blue, Carolyn L

2004-01-01

Nursing assistants (NAs) who work in nursing and personal care facilities are twice and five times more likely, respectively, to suffer a musculoskeletal disorder compared to service industries and other health care facilities, respectively. The purpose of this study was to develop an ergonomics training program for selected NAs at a state-run veterans' home to decrease musculoskeletal disorders by 1) developing questionnaires to assess musculoskeletal stress, 2) evaluating the work environment, 3) developing and using a training package, and 4) determining the application of the information from the training package by NAs on the floor. Results show two new risk factors not previously identified for nursing personnel in the peer-reviewed literature. Quizzes given to the nursing personnel before and after training indicated a significant improvement in understanding the principles of ergonomics and patient-handling techniques. Statistical analysis comparing the pre-training and post-training questionnaires indicated no significant decrease in musculoskeletal risk factors and no significant reduction in pain or discomfort or overall mental or physical health.

ERGONOMIC AND ECOLOGICALSAFETY - FACTORSNESSARY TO IMPROVETHE COMPETITIVENESS OF THE DOMESTIC CONSTRUCTION MACHINERY

Directory of Open Access Journals (Sweden)

Volkov Andrey Anatol’evich

2017-03-01

Full Text Available The analysis of output and domestic used construction machinery showed that the most vulnerable link remains a problem of underreporting of ergonomics and environmental safety requirements. Compliance with ergonomic requirements enhances the performance of mechanized operations, leading to a decrease in construction costs. Increased environmental requirements reduce the negative impact on air basin. These results suggest the need to improve the structures of building machines. Made recommendations for a comprehensive solution to the problem. The measures to improve environmental safety, ergonomic design requirements of construction machinery, mechanisms of the optimal development of the domestic construction machinery, through the development and implementation of appropriate measures. Keywords: ergonomics of construction equipment, environmental safety of construction equipment

A Self-assessment Checklist for Undergraduate Students’ Argumentative Writing

Directory of Open Access Journals (Sweden)

Vahid Nimehchisalem

2014-02-01

Full Text Available With a growing emphasis on students’ ability to assess their own written works in teaching English as a Second Language (ESL writing courses, self-assessment checklists are today regarded as useful tools. These checklists can help learners diagnose their own weaknesses and improve their writing performance. This necessitates development of checklists that guide the learners in assessing their own writing. In this study, a self-assessment checklist was developed for undergraduate students in an ESL context to help them with their argumentative essays. This paper presents the related literature and theories, based on which the checklist was developed. The checklist is described and its potential theoretical and practical implications in ESL writing classes are discussed. Further research is necessary to refine the checklist through focus group studies with lecturers and students.

Business case for implementing two ergonomic interventions at an electric power utility.

Science.gov (United States)

Seeley, Patricia A; Marklin, Richard W

2003-09-01

Ergonomics analysis of line workers in the electric power industry who work overhead on utility poles revealed some tasks for which less than 1% of the general population had sufficient strength to perform. During a 2-year study, a large Midwestern US electric utility provided a university with a team of represented workers and management. They evaluated, recommended, and monitored interventions for 32 common line worker tasks that were rated at medium to high magnitude of risk factors for musculoskeletal disorders (MSDs). Two of the recommended ergonomic interventions-the battery-operated press and cutter-were selected by the team as having the greatest potential for reducing risk factors of MSDs. Only overhead distribution line worker tasks were evaluated. A business case was formulated that took into account medical injury and illness statistics, workers' compensation, replacement worker and retraining costs. An outline of a business case formulation and a sample intervention payback calculation is shown. Based on the business case, the utility committed over US dollars 300000 to purchase battery-operated presses and cutters for their overhead distribution line crews.

Positive outcomes of office ergonomics in terms of higher productivity

Directory of Open Access Journals (Sweden)

Terek Edit

2014-01-01

Full Text Available One of the sciences which considers to human health, human performance and body activities is Ergonomics. Ergonomics is one of the modern sciences, drawing as much from the field as from the laboratory, and including elements of art and craft as well. Before designing the workplace it is necessary to determine its requirements, i.e., which it is intended for, what are the characteristics of the existing work equipment and the additional tools needed. However, there are some standards and with their application people will prevent the occurrence of modern office diseases. This paper is focused on the positive aspects of ergonomics in improvement of the working environment.

The assessment of visually impaired persons working capacities using electrophysiological and ophthalmic ergonomics methods

Directory of Open Access Journals (Sweden)

M. I. Razumovsky

2014-07-01

Full Text Available Aim was to analyze working capacities of visually impaired persons by means of complex electrophysiological and ophthalmic ergonomics eye examination.Materials and methods. Standard clinical ophthalmologic examination (visual acuity measurement, refractometry, biomicroscopy, ophthalmoscopy as well as electrophysiological (electrooculography, electrical sensitivity of the eye, critical flicker fusion frequency and ophthalmic ergonomics tests (accommodation measurement, professional testing using automated system «Proftest-1» were performed.Results. Complex electrophysiological and ophthalmic ergonomics tests were performed in 20 visually impaired persons. Their results revealed direct correlation between electrophysiological and ophthalmic ergonomics indices.Conclusion. Working capacities of visually impaired persons can be assessed reliably using complex electrophysiological and ophthalmic ergonomics eye examination only.

The assessment of visually impaired persons working capacities using electrophysiological and ophthalmic ergonomics methods

Directory of Open Access Journals (Sweden)

M. I. Razumovsky

2014-01-01

Full Text Available Aim was to analyze working capacities of visually impaired persons by means of complex electrophysiological and ophthalmic ergonomics eye examination.Materials and methods. Standard clinical ophthalmologic examination (visual acuity measurement, refractometry, biomicroscopy, ophthalmoscopy as well as electrophysiological (electrooculography, electrical sensitivity of the eye, critical flicker fusion frequency and ophthalmic ergonomics tests (accommodation measurement, professional testing using automated system «Proftest-1» were performed.Results. Complex electrophysiological and ophthalmic ergonomics tests were performed in 20 visually impaired persons. Their results revealed direct correlation between electrophysiological and ophthalmic ergonomics indices.Conclusion. Working capacities of visually impaired persons can be assessed reliably using complex electrophysiological and ophthalmic ergonomics eye examination only.

Ergonomics study for workers at food production industry

Directory of Open Access Journals (Sweden)

Mohd Fazi Hamizatun

2017-01-01

Full Text Available The health constraint faced by production workers affects the quality of the work. The productivity of the workers is affected by the Work-related Musculoskeletal Disorder (WMSD which limits the movement of the workers. The comfort workplace condition, known as ergonomic environment is important to prevent the occurrence of the WMSD. Proper ergonomic workplace considers the condition of the workers while doing the assigned work. The objectives of this study are to identify the current problems related to ergonomic in food production process, to analyse the actual production data by using Rapid Upper Limb Assessment (RULA and Rapid Entire Body Assessment (REBA and to recommend the ergonomic workplace environment based on the condition of the study. The study was done at a Small and Medium Enterprises (SME food production company in the Klang Valley of Malaysia. The condition of the workers affects the productivity of the company due to workers’ health deficiency. From the findings, the workers are exposed to the awkward postures which leads to the Work-Musculoskeletal Disorders (WMSDs. Besides, the best height of the worker at the study area (critical area to prevent the worker from WMSDs is within 155 cm to 160 cm. The results show that the workers are exposed to the WMSD in different level of risks which causes high absenteeism among the workers.

Mass of materials: the impact of designers on construction ergonomics.

Science.gov (United States)

Smallwood, John

2012-01-01

Many construction injuries are musculoskeletal related in the form of sprains and strains arising from the handling of materials, which are specified by designers. The paper presents the results of a study conducted among delegates attending two 'designing for H&S' (DfH&S) seminars using a questionnaire. The salient findings include: the level of knowledge relative to the mass and density of materials is limited; designers generally do not consider the mass and density of materials when designing structures and elements and specifying materials; to a degree designers appreciate that the mass and density of materials impact on construction ergonomics; designers rate their knowledge of the mass and density of materials as limited, and designers appreciate the potential of the consideration of the mass and density of materials to contribute to an improvement in construction ergonomics. Conclusions include: designers lack the requisite knowledge relative to the mass and density of materials; designers are thus precluded from conducting optimum design hazard identification and risk assessments, and tertiary built environment designer education does not enlighten designers relative to construction ergonomics. Recommendations include: tertiary built environment designer education should construction ergonomics; professional associations should raise the level of awareness relative to construction ergonomics, and design practices should include a category 'mass and density of materials' in their practice libraries.

Initial experience using a robotic-driven laparoscopic needle holder with ergonomic handle: assessment of surgeons' task performance and ergonomics.

Science.gov (United States)

Sánchez-Margallo, Juan A; Sánchez-Margallo, Francisco M

2017-12-01

The objective of this study is to assess the surgeons' performance and ergonomics during the use of a robotic-driven needle holder in laparoscopic suturing tasks. Six right-handed laparoscopic surgeons with different levels of experience took part in this study. Participants performed a set of three different intracorporeal suturing tasks organized in ten trials during a period of five weeks. Surgeons used both conventional (Conv) and robotic (Rob) laparoscopic needle holders. Precision using the surgical needle, quality of the intracorporeal suturing performance, execution time and leakage pressure for the urethrovesical anastomosis, as well as the ergonomics of the surgeon's hand posture, were analyzed during the first, fifth and last trials. No statistically significant differences in precision and quality of suturing performance were obtained between both groups of instruments. Surgeons required more time using the robotic instrument than using the conventional needle holder to perform the urethrovesical anastomosis, but execution time was significantly reduced after training ([Formula: see text] 0.05). There were no differences in leakage pressure for the anastomoses carried out by both instruments. After training, novice surgeons significantly improved the ergonomics of the wrist ([Formula: see text] 0.05) and index finger (Conv: 36.381[Formula: see text], Rob: 30.389[Formula: see text]; p = 0.024) when using the robotic instrument compared to the conventional needle holder. Results have shown that, although both instruments offer similar technical performance, the robotic-driven instrument results in better ergonomics for the surgeon's hand posture compared to the use of a conventional laparoscopic needle holder in intracorporeal suturing.

Surgeons' physical discomfort and symptoms during robotic surgery: a comprehensive ergonomic survey study.

Science.gov (United States)

Lee, G I; Lee, M R; Green, I; Allaf, M; Marohn, M R

2017-04-01

It is commonly believed that robotic surgery systems provide surgeons with an ergonomically sound work environment; however, the actual experience of surgeons practicing robotic surgery (RS) has not been thoroughly researched. In this ergonomics survey study, we investigated surgeons' physical symptom reports and their association with factors including demographics, specialties, and robotic systems. Four hundred and thirty-two surgeons regularly practicing RS completed this comprehensive survey comprising 20 questions in four categories: demographics, systems, ergonomics, and physical symptoms. Chi-square and multinomial logistic regression analyses were used for statistical analysis. Two hundred and thirty-six surgeons (56.1 %) reported physical symptoms or discomfort. Among those symptoms, neck stiffness, finger, and eye fatigues were the most common. With the newest robot, eye symptom rate was considerably reduced, while neck and finger symptoms did not improve significantly. A high rate of lower back stiffness was correlated with higher annual robotic case volume, and eye symptoms were more common with longer years practicing robotic surgery (p ergonomic settings reported lower symptom report rates. Symptoms were not correlated with age and gender. Although RS provides relatively better ergonomics, this study demonstrates that 56.1 % of regularly practicing robotic surgeons still experience related physical symptoms or discomfort. In addition to system improvement, surgeon education in optimizing the ergonomic settings may be necessary to maximize the ergonomic benefits in RS.

The development and validation of an ergonomics index for assessing tractor operator work place

Directory of Open Access Journals (Sweden)

Juan Paulo Barbieri

2018-02-01

Full Text Available ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996, which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015 and ABNT NBR ISO 4252 (2011, which regulate the access to operator workplaces; and NR 12 (2010, which determines the mandatory items of operator workplaces.Thirty-four operator work places of 152 models of new agricultural tractors sold in the Brazilian market were analyzed in this study. Ergonomics index was developed and validated using these standards, and the findings enabled the ranking of agricultural tractors. Therefore, the proposed ergonomics index proved feasible and may be applied to other agricultural machines.

Ergonomic adjustments on a website from the usability of functions: Can deficits impair functionalities?

Directory of Open Access Journals (Sweden)

Dalila Giovana Pagnoncelli Laperuta

2017-09-01

Full Text Available Current study assesses whether deficits and usability of ergonomics impair the functionality of a university website. The concepts of functionality, usability and ergonomics were foregrounded by contextualizing them within a university profile. Later, a satisfaction survey was proposed to users to measure the satisfaction in the use of the website and to map the problems in usability. In addition, an ergonomic inspection was performed on the site by applying Bastien and Scapin´s ergonomic criteria. After analyzing results by descriptive statistics and content analysis, the ergonomic and usability problems were detected, or rather, feedback deficits, minimum action (navigation, flexibility and experience impaired the excellence of website´s functionality, causing dissatisfaction or abandonment of the website by the users. After the analysis of the results, ergonomic adjustments were suggested for the website. They may be a help in new website projects or adjust products in which usability has not been incorporated to the development process.

[Feasibility and relevance of an operating room safety checklist for developing countries: Study in a French hospital in Djibouti].

Science.gov (United States)

Becret, A; Clapson, P; Andro, C; Chapelier, X; Gauthier, J; Kaiser, E

2013-01-01

The use of the World Health Organization surgical safety checklist, mandatory in operating rooms (OR) in France, significantly reduces morbidity and mortality. Our objective was to evaluate the use of this checklist in the OR of a French military hospital in Djibouti (Horn of Africa). The study was performed in three stages: a retrospective evaluation of the checklist use over the previous two months, to assess the utilization and completeness rates; provision of information to the OR staff; and thereafter, prospective evaluation for a one-month period of checklist use, the reasons for non-compliance, and the cases in which the checklist identified errors and thus prevented serious adverse events. The initial utilization rate was 49%, with only 24% complete. After staff training and during the study these rates reached 100% and 99%. The staff encountered language difficulties in 53% of cases, and an interpreter was available for 81% of them. The capacity of the surgical safety checklist to detect serious adverse events was highlighted. The utilization and completeness rates were initially worse than those observed in metropolitan French ORs, but a simple staff information program was rapidly effective. Language difficulties are frequent but an interpreter is often available, unlike in developed countries where language problems are uncommon and the availability of interpreters difficult. Moreover, this study illustrates the ability of the checklist to detect and therefore prevent potentially serious adverse events.

Design improvement of automated gallon washing machine to minimize musculoskeletal disorders (MSDs) in CV Barokah Abadi using ergonomic function deployment (EFD) approach

Science.gov (United States)

Fakhriza, Z.; Rahayu, M.; Iqbal, M.

2017-12-01

In the production activity of Bottled Drinking Water (AMDK) in CV Barokah Abadi there is a gallon washing station. At the work station it involves three stages of activity such as washing and rinsing the outside of the gallon, spraying the inside of the gallon and rubbing the inside of the gallon which is done in a separate place. Distribution of Nordic Body Map (NBM) questionnaires showing employee complaints data at gallon washing stations where workers complained of pain in the right upper arm, right forearm and right wrist respectively 88% and workers also complained of pain in the waist and The right hand respectively by 81%. Ergonomic gallon washer is one way to minimize the risk of MSDs. The design begins with an ergonomic evaluation of the existing conditions and the concept of the initial design of the gallon washer. The evaluation is utilized for consideration of design improvements with the utilization of Ergonomic Function Deployment (EFD) in order for the product concept to conform to the ECSHE principle (Effective, Comfortable, Safe, Healthy and Efficient). The tool improvement design can minimize the risk of MSDs seen from the worker’s posture while using an ergonomic washer.

Integrating Assessment into Teaching Practices: Using Checklists for Business Writing Assignments.

Science.gov (United States)

Vice, Janna P.; Carnes, Lana W.

2002-01-01

Explains how to use checklists as a tool for developing, implementing, and evaluating business writing assignments. Gives an example of their use with memoranda, short reports, and analytical field reports. (SK)

Evaluating Checklist Use in Companion Animal Wellness Visits in a Veterinary Teaching Hospital: A Preliminary Study

OpenAIRE

Nappier, Michael T.; Corrigan, Virginia K.; Bartl-Wilson, Lara E.; Freeman, Mark; Werre, Stephen; Tempel, Eric

2017-01-01

The number of companion animal wellness visits in private practice has been decreasing, and one important factor cited is the lack of effective communication between veterinarians and pet owners regarding the importance of preventive care. Checklists have been widely used in many fields and are especially useful in areas where a complex task must be completed with multiple small steps, or when cognitive fatigue is evident. The use of checklists in veterinary medical education has not yet been...

Using the Nine Common Themes of Good Practice checklist as a tool for evaluating the research priority setting process of a provincial research and program evaluation program.

Science.gov (United States)

Mador, Rebecca L; Kornas, Kathy; Simard, Anne; Haroun, Vinita

2016-03-23

Given the context-specific nature of health research prioritization and the obligation to effectively allocate resources to initiatives that will achieve the greatest impact, evaluation of priority setting processes can refine and strengthen such exercises and their outcomes. However, guidance is needed on evaluation tools that can be applied to research priority setting. This paper describes the adaption and application of a conceptual framework to evaluate a research priority setting exercise operating within the public health sector in Ontario, Canada. The Nine Common Themes of Good Practice checklist, described by Viergever et al. (Health Res Policy Syst 8:36, 2010) was used as the conceptual framework to evaluate the research priority setting process developed for the Locally Driven Collaborative Projects (LDCP) program in Ontario, Canada. Multiple data sources were used to inform the evaluation, including a review of selected priority setting approaches, surveys with priority setting participants, document review, and consultation with the program advisory committee. The evaluation assisted in identifying improvements to six elements of the LDCP priority setting process. The modifications were aimed at improving inclusiveness, information gathering practices, planning for project implementation, and evaluation. In addition, the findings identified that the timing of priority setting activities and level of control over the process were key factors that influenced the ability to effectively implement changes. The findings demonstrate the novel adaptation and application of the 'Nine Common Themes of Good Practice checklist' as a tool for evaluating a research priority setting exercise. The tool can guide the development of evaluation questions and enables the assessment of key constructs related to the design and delivery of a research priority setting process.

Understanding knowledge transfer in an ergonomics intervention at a poultry processing plant.

Science.gov (United States)

Antle, David M; MacKinnon, Scott N; Molgaard, John; Vézina, Nicole; Parent, Robert; Bornstein, Stephen; Leclerc, Louise

2011-01-01

This case study reviews the knowledge transfer (KT) process of implementing a knife sharpening and steeling program into a poultry processing plant via a participatory ergonomics intervention. This ergonomics intervention required stakeholder participation at the company level to move a 'train-the-trainer' program, developed in Québec, Canada, into action on the plant's deboning line. Communications and exchanges with key stakeholders, as well as changes in steeling and production behaviours were recorded. The intervention was assumed to be at least partially successful because positive changes in work operations occurred. Ergonomic-related changes such as those documented have been cited in the academic literature as beneficial to worker health. However, several components cited in literature that are associated with a successful participatory ergonomics intervention were not attained during the project. A Dynamic Knowledge Transfer Model was used to identify KT issues that impacted on the success of train-the-trainer program. A debriefing analysis reveals that a failure to consider key participatory ergonomics factors necessary for success were related to capacity deficits in the knowledge dissemination strategy.

The application of participatory ergonomics in a healthcare setting in Hong Kong.

Science.gov (United States)

Lee, Edwin W C; Fok, Joan P C; Lam, Augustine T; Law, Rainbow K Y; Szeto, Grace P Y; Li, Philip P K

2014-01-01

Work-related musculoskeletal disorders (WRMDs) are recognized as a major source of significant pain and disability in the healthcare sector. However, they are preventable if appropriate surveillance and intervention programs are implemented. The purpose of this paper is to describe the holistic ergonomic approach that was used to address the multifactorial problems encountered by healthcare workers in their daily work. Using participatory ergonomics, healthcare workers in this study teamed up with management and staff with expertise in ergonomic analysis, design, and implementation of remedies. Selected participatory ergonomic intervention programs targeted at an organizational level are elaborated. Interventions included pre-work stretching, workplace surveillance at a psychiatric department, on-site ergonomic teaching for community nurses, and display screen equipment consultancy. Changes in workplace design, equipment re-arrangement, awareness of proper posture, and adoption of good work practices all play important roles in reducing musculoskeletal disorders among healthcare workers. Prompt occupational medicine and rehabilitation services were also provided to complement the work disability prevention process. The impact of the various intervention programs on staff health, costs and productivity of the organization are simultaneously discussed.

Do we need sustainability as a new approach in human factors and ergonomics?

Science.gov (United States)

Zink, Klaus J; Fischer, Klaus

2013-01-01

The International Ergonomics Association Technical Committee 'Human Factors and Sustainable Development' was established to contribute to a broad discourse about opportunities and risks resulting from current societal 'mega-trends' and their impacts on the interactions among humans and other elements of a system, e.g. in work systems. This paper focuses on the underlying key issues: how do the sustainability paradigm and human factors/ergonomics interplay and interact, and is sustainability necessary as a new approach for our discipline? Based on a discussion of the sustainability concept, some general principles for designing new and enhancing existent approaches of human factors and ergonomics regarding their orientation towards sustainability are proposed. The increasing profile of sustainability on the international stage presents new opportunities for human factors/ergonomics. Positioning of the sustainability paradigm within human factors/ergonomics is discussed. Approaches to incorporating sustainability in the design of work systems are considered.

Implementation of an ergonomics intervention in a Swedish flight baggage handling company-A process evaluation.

Science.gov (United States)

Bergsten, Eva L; Mathiassen, Svend Erik; Larsson, Johan; Kwak, Lydia

2018-01-01

To conduct a process evaluation of the implementation of an ergonomics training program aimed at increasing the use of loading assist devices in flight baggage handling. Feasibility related to the process items recruitment, reach, context, dose delivered (training time and content); dose received (participants' engagement); satisfaction with training; intermediate outcomes (skills, confidence and behaviors); and barriers and facilitators of the training intervention were assessed by qualitative and quantitative methods. Implementation proved successful regarding dose delivered, dose received and satisfaction. Confidence among participants in the training program in using and talking about devices, observed use of devices among colleagues, and internal feedback on work behavior increased significantly (pjob insecurity. In identifying important barriers and facilitators for a successful outcome, this study can help supporting the effectiveness of future interventions. Our results suggest that barriers caused by organizational changes may likely be alleviated by recruiting motivated trainees and securing strong organizational support for the implementation.

[Improving patient safety: Usefulness of safety checklists in a neonatal unit].

Science.gov (United States)

Arriaga Redondo, María; Sanz López, Ester; Rodríguez Sánchez de la Blanca, Ana; Marsinyach Ros, Itziar; Collados Gómez, Laura; Díaz Redondo, Alicia; Sánchez Luna, Manuel

2017-10-01

Due to the complexity and characteristics of their patients, neonatal units are risk areas for the development of adverse events (AE). For this reason, there is a need to introduce and implement some tools and strategies that will help to improve the safety of the neonatal patient. Safety check-lists have shown to be a useful tool in other health areas but they are not sufficiently developed in Neonatal Units. A quasi-experimental prospective study was conducted on the design and implementation of the use of a checklist and evaluation of its usefulness for detecting incidents. The satisfaction of the health professionals on using the checklist tool was also assessed. The compliance rate in the neonatal intensive care unit (NICU) was 56.5%, with 4.03 incidents per patient being detected. One incident was detected for every 5.3 checklists used. The most frequent detected incidents were those related to medication, followed by inadequate alarm thresholds, adjustments of the monitors, and medication pumps. The large majority (75%) of the NICU health professionals considered the checklist useful or very useful, and 68.75% considered that its use had managed to avoid an AE. The overall satisfaction was 83.33% for the professionals with less than 5 years working experience, and 44.4% of the professionals with more than 5 years of experience were pleased or very pleased. The checklists have shown to be a useful tool for the detection of incidents, especially in NICU, with a positive assessment from the health professionals of the unit. Copyright © 2016 Asociación Española de Pediatría. Publicado por Elsevier España, S.L.U. All rights reserved.

Computerized nursing process in the Intensive Care Unit: ergonomics and usability

Directory of Open Access Journals (Sweden)

Sônia Regina Wagner de Almeida

Full Text Available Abstract OBJECTIVE Analyzing the ergonomics and usability criteria of the Computerized Nursing Process based on the International Classification for Nursing Practice in the Intensive Care Unit according to International Organization for Standardization(ISO. METHOD A quantitative, quasi-experimental, before-and-after study with a sample of 16 participants performed in an Intensive Care Unit. Data collection was performed through the application of five simulated clinical cases and an evaluation instrument. Data analysis was performed by descriptive and inferential statistics. RESULTS The organization, content and technical criteria were considered "excellent", and the interface criteria were considered "very good", obtaining means of 4.54, 4.60, 4.64 and 4.39, respectively. The analyzed standards obtained means above 4.0, being considered "very good" by the participants. CONCLUSION The Computerized Nursing Processmet ergonomic and usability standards according to the standards set by ISO. This technology supports nurses' clinical decision-making by providing complete and up-to-date content for Nursing practice in the Intensive Care Unit.

An Evaluation of the Performance Diagnostic Checklist-Human Services (PDC-HS) Across Domains.

Science.gov (United States)

Wilder, David A; Lipschultz, Joshua; Gehrman, Chana

2018-06-01

The Performance Diagnostic Checklist-Human Services (PDC-HS) is an informant-based tool designed to assess the environmental variables that contribute to poor employee performance in human service settings. Although the PDC-HS has been shown to effectively identify variables contributing to problematic performance, interventions based on only two of the four PDC-HS domains have been evaluated to date. In addition, the extent to which PDC-HS-indicated interventions are more effective than nonindicated interventions for two domains remains unclear. In the current study, we administered the PDC-HS to supervisors to assess the variables contributing to infrequent teaching of verbal operants and use of a timer by therapists at a center-based autism treatment program. Each of the four PDC-HS domains was identified as contributing to poor performance for at least one therapist. We then evaluated PDC-HS-indicated interventions for each domain. In addition, to assess the predictive validity of the tool, we evaluated various nonindicated interventions prior to implementing a PDC-HS-indicated intervention for two of the four domains. Results suggest that the PDC-HS-indicated interventions were effective across all four domains and were more effective than the nonindicated interventions for the two domains for which they were evaluated. Results are discussed in terms of the utility of the PDC-HS to identify appropriate interventions to manage therapist performance in human service settings.

ICF-DOC: the ICF dedicated checklist for evaluating functioning and disability in people with disorders of consciousness.

Science.gov (United States)

Leonardi, Matilde; Covelli, Venusia; Giovannetti, Ambra M; Raggi, Alberto; Sattin, Davide

2014-09-01

Clinicians need a comprehensive description of patients' functioning state to capture the complex interaction between symptoms and environmental factors, and to determine the actual level of functioning in patients in a vegetative state or a minimally conscious state. The aim of this study is to develop an International Classification of Functioning, Disability, and Health (ICF) checklist for patients with disorders of consciousness (DOC) so as to capture and describe, with a tailored list of categories, the most common health, disability, and functioning issues of adult patients with DOC. The WHO ICF checklist was used as a basis for collecting data. This was an observational, cross-sectional, multicenter study conducted in 69 Italian centers. Specific methodological procedures were used to identify the most appropriate categories for DOC patients to be added to or deleted from the ICF checklist so as to develop the ICF-DOC checklist. A total of 566 adult patients were enrolled: 398 in a vegetative state and 168 in a minimally conscious state. A total of 127 ICF categories reached the threshold of 20% concerning the presence of a problem: 37 categories from the body functions chapter, 13 from the body structures chapter, 46 from the activities and participations chapter, and 31 from the environmental factors chapter. ICF categories identified in this study can be useful guidelines for clinicians and researchers to collect data on functioning and disability of adult patients with DOC. The new ICF-DOC checklist allows monitoring of the effects of interventions on functional areas and possible changes in each patient in follow-up studies.

A survey to identify barriers of implementing an antibiotic checklist.

Science.gov (United States)

van Daalen, F V; Geerlings, S E; Prins, J M; Hulscher, M E J L

2016-04-01

A checklist is an effective implementation tool, but addressing barriers that might impact on the effectiveness of its use is crucial. In this paper, we explore barriers to the uptake of an antibiotic checklist that aims to improve antibiotic use in daily hospital care. We performed an online questionnaire survey among medical specialists and residents with various professional backgrounds from nine Dutch hospitals. The questionnaire consisted of 23 statements on anticipated barriers hindering the uptake of the checklist. Furthermore, it gave the possibility to add comments. We included 219 completed questionnaires (122 medical specialists and 97 residents) in our descriptive analysis. The top six anticipated barriers included: (1) lack of expectation of improvement of antibiotic use, (2) lack of expected patients' satisfaction by checklist use, (3) lack of feasibility of the checklist, (4) negative previous experiences with other checklists, (5) the complexity of the antibiotic checklist and (6) lack of nurses' expectation of checklist use. Remarkably, 553 comments were made, mostly (436) about the content of the checklist. These insights can be used to improve the specific content of the checklist and to develop an implementation strategy that addresses the identified barriers.

Discussion after implementation of possible ergonomics contributions in production lines automation project

OpenAIRE

José Adriano Canton; Andrea Regina Martins Fontes; Isaías Torres

2016-01-01

This paper addresses the issue of work spaces designed based on Activity-Centered Ergonomics. The aim was to reflect on the role of Ergonomics in the design of productive situations in order to anticipate and mitigate the emergence of new constraints. This study was developed using a case study from the packaging industry, where an automated line was implemented to mitigate the injuries suffered as result of the manual system. This article was based on the results of an Ergonomic Work Analysi...

ERGONOMICs IN THE COMPUTER WORKsTATION

African Journals Online (AJOL)

2010-09-09

Sep 9, 2010 ... in relation to their work environment and working surroundings. ... prolonged computer usage and application of ergonomics in the workstation. Design:One hundred and .... Occupational Health and Safety Services should.

Crossing levels in systems ergonomics: a framework to support 'mesoergonomic' inquiry.

Science.gov (United States)

Karsh, Ben-Tzion; Waterson, Patrick; Holden, Richard J

2014-01-01

In this paper we elaborate and articulate the need for what has been termed 'mesoergonomics'. In particular, we argue that the concept has the potential to bridge the gap between, and integrate, established work within the domains of micro- and macroergonomics. Mesoergonomics is defined as an open systems approach to human factors and ergonomics (HFE) theory and research whereby the relationship between variables in at least two different system levels or echelons is studied, and where the dependent variables are human factors and ergonomic constructs. We present a framework which can be used to structure a set of questions for future work and prompt further empirical and conceptual inquiry. The framework consists of four steps: (1) establishing the purpose of the mesoergonomic investigation; (2) selecting human factors and ergonomics variables; (3) selecting a specific type of mesoergonomic investigation; and (4) establishing relationships between system levels. In addition, we describe two case studies which illustrate the workings of the framework and the value of adopting a mesoergonomic perspective within HFE. The paper concludes with a set of issues which could form part of a future agenda for research within systems ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Process evaluation of a parcipatory ergonomics programme to prevent low back pain and neck pain among workers

NARCIS (Netherlands)

Driessen, M.T.; Proper, K.I.; Anema, J.R.; Bongers, P.M.; van der Beek, A.J.

2010-01-01

Background: Both low back pain (LBP) and neck pain (NP) are major occupational health problems. In the workplace, participatory ergonomics (PE) is frequently used on musculoskeletal disorders. However, evidence on the effectiveness of PE to prevent LBP and NP obtained from randomised controlled

Process evaluation of a participatory ergonomics programme to prevent low back pain and neck pain among workers

NARCIS (Netherlands)

Driessen, M.T.; Proper, K.I.; Anema, J.R.; Bongers, P.M.; Beek, A.J. van der

2010-01-01

Background: Both low back pain (LBP) and neck pain (NP) are major occupational health problems. In the workplace, participatory ergonomics (PE) is frequently used on musculoskeletal disorders. However, evidence on the effectiveness of PE to prevent LBP and NP obtained from randomised controlled

Validating Obstetric Emergency Checklists using Simulation: A Randomized Controlled Trial.

Science.gov (United States)

Bajaj, Komal; Rivera-Chiauzzi, Enid Y; Lee, Colleen; Shepard, Cynthia; Bernstein, Peter S; Moore-Murray, Tanya; Smith, Heather; Nathan, Lisa; Walker, Katie; Chazotte, Cynthia; Goffman, Dena

2016-10-01

Background The World Health Organization's Surgical Safety Checklist has demonstrated significant reduction in surgical morbidity. The American Congress of Obstetricians and Gynecologists District II Safe Motherhood Initiative (SMI) safety bundles include eclampsia and postpartum hemorrhage (PPH) checklists. Objective To determine whether use of the SMI checklists during simulated obstetric emergencies improved completion of critical actions and to elicit feedback to facilitate checklist revision. Study Design During this randomized controlled trial, teams were assigned to use a checklist during one of two emergencies: eclampsia and PPH. Raters scored teams on critical step completion. Feedback was elicited through structured debriefing. Results In total, 30 teams completed 60 scenarios. For eclampsia, trends toward higher completion were noted for blood pressure and airway management. For PPH, trends toward higher completion rates were noted for PPH stage assessment and fundal massage. Feedback resulted in substantial checklist revision. Participants were enthusiastic about using checklists in a clinical emergency. Conclusion Despite trends toward higher rates of completion of critical tasks, teams using checklists did not approach 100% task completion. Teams were interested in the application of checklists and provided feedback necessary to substantially revise the checklists. Intensive implementation planning and training in use of the revised checklists will result in improved patient outcomes. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

Improving office work: A participatory ergonomic experiment in a naturalistic setting

NARCIS (Netherlands)

Vink, P.; Kompier, M.A.J.

1997-01-01

In a Department of Salary Records where VDU tasks were performed at a high work rate, a participative ergonomic study was undertaken. First, the 'old' workplace was investigated for all 45 employees. Work stations appeared to be of poor ergonomic quality. Second, 12 employees participated in an

The Process of Participatory Ergonomics Simulation in Hospital Work System Design

DEFF Research Database (Denmark)

Andersen, Simone Nyholm

2016-01-01

Participatory ergonomics simulation (PES) is a method to involve workers in simulation and design of their own future work system. Understanding of the process of PES is crucial in order to plan and facilitate the process towards creating an ergonomics work system design supporting both human well...

Ergonomics-inspired Reshaping and Exploration of Collections of Models

KAUST Repository

Zheng, Youyi

2015-06-22

This paper examines the following question: given a collection of man-made shapes, e.g., chairs, can we effectively explore and rank the shapes with respect to a given human body – in terms of how well a candidate shape fits the specified human body? Answering this question requires identifying which shapes are more suitable for a prescribed body, and how to alter the input geometry to better fit the shapes to a given human body. The problem links physical proportions of the human body and its interaction with object geometry, which is often expressed as ergonomics guidelines. We present an interactive system that allows users to explore shapes using different avatar poses, while, at the same time providing interactive previews of how to alter the shapes to fit the user-specified body and pose. We achieve this by first constructing a fuzzy shape-to-body map from the ergonomic guidelines to multi-contacts geometric constraints; and then, proposing a novel contact-preserving deformation paradigm to realize a reshaping to adapt the input shape. We evaluate our method on collections of models from different categories and validate the results through a user study.

Ergonomics, quality and continuous improvement--conceptual and empirical relationships in an industrial context.

Science.gov (United States)

Eklund, J

1997-10-01

This paper reviews the literature comparing the fields of ergonomics and quality, mainly in an industrial context, including mutual influences, similarities and differences. Relationships between ergonomics and the factors: work conditions, product design, ISO 9000, continuous improvements and TQM are reviewed in relation to the consequence, application, and process domains. The definitions of ergonomics and quality overlap substantially. Quality deficiencies, human errors and ergonomics problems often have the same cause, which in many cases can be traced to the design of work, workplace and environment e.g. noise, light, postures, loads, pace and work content. In addition, the possibility of performing to a high standard at work is an important prerequisite for satisfaction and well-being. Contradictions between the two fields have been identified in the view of concepts such as standardization, reduction of variability and copying of best practice, requiring further research. The field of quality would gain by incorporating ergonomics knowledge, especially in the areas of work design and human capability, since these factors are decisive for human performance and also therefore the performance of the systems involved. The field of ergonomics, on the other hand, would benefit from developing a stronger emphasis on methodologies and structures for improvement processes, including a clearer link with leadership and company strategies. Just as important is a further development of practicable participative ergonomics methods and tools for use at workplaces by the workers themselves, in order to integrate the top-down and the bottom-up processes and achieve better impact. Using participative processes for problem-solving and continuous improvement, focusing ergonomics and quality jointly has a great potential for improving working conditions and quality results simultaneously, and satisfying most of the interested parties.