Ergonomics

CSIR Research Space (South Africa)

Schutte, PC

2007-01-01

Full Text Available whether trends exist across jobs that use similar equipment, tools or processes. 23.4.4 Limitations An effective ergonomics hazard identification and risk assessment process should facilitate the classification of possible high risk jobs in a mining... to review the data available, which identify a shop or workplace as a potential ergonomics problem area. It is also useful to become familiar with the processes and job activities that are performed in each work area. Step 2: Conduct a workplace/ work...

Reduction of work-related musculoskeletal risk factors following ergonomics education of sewing machine operators.

Science.gov (United States)

Bulduk, Sıdıka; Bulduk, Emre Özgür; Süren, Tufan

2017-09-01

Work-related musculoskeletal disorders (WMSDs) are a major hazard for sewing machine operators. Ergonomics education is recommended for reducing musculoskeletal disorders at workstations. This study aimed to evaluate the effect of an ergonomics education in reducing the exposure to risk factors for WMSDs among sewing machine operators. In this study of 278 workers, their exposure to the risk of WMSDs was assessed using the quick exposure check scale prior to them attending an ergonomics education programme and then again 3 months after the programme. The scores for risk exposure before the education programme were moderate for back (static) and back (dynamic), high for shoulder/arm and very high for wrist/hand and neck. The results obtained 3 months later were low for back (static) and shoulder/arm, and moderate for back (dynamic), wrist/hand and neck. Based on our results, ergonomics education can reduce the exposure to risk factors for WMSDs in the workplace.

[Inter-rater agreement on self-reported exposure to ergonomic risk factors for the upper extremities among mechanic assemblers in an automotive industry].

Science.gov (United States)

d'Errico, Angelo; Fontana, Dario; Merogno, Angela

2016-01-01

to assess reproducibility of self-reported exposure to ergonomic hazards for the upper limbs, measured through a questionnaire based on a diffused checklist for the assessment of ergonomic risk (OCRA) in a sample of mechanical assemblers of an automotive industry. cross-sectional study; reproducibility was assessed as interrater agreement of a composite index of ergonomic risk, estimated through the intraclass correlation coefficient (ICC). 58 mechanical assemblers, working in 29 twin areas, characterised by same work stations and tasks. composite index of ergonomic risk for the upper limbs. reproducibility of the ergonomic index was high in the overall sample (ICC: 0.81) and it was higher for the twin areas employing same-gender workers (ICC: 0.96), compared to those with workers of the opposite gender (ICC: 0.66). these results indicate that a questionnaire measuring with a great detail the exposure to the main ergonomic risk factors for the upper limbs, as the one based on the OCRA checklist used for this study, would allow to obtain a highly reproducible ergonomic index. If its validity against the corresponding observational checklist will be found elevated by future studies, this questionnaire may represent a useful tool for a preliminary assessment of workers' exposure to ergonomic hazards for the upper limbs.

Evidence-based ergonomics education: Promoting risk factor awareness among office computer workers.

Science.gov (United States)

Mani, Karthik; Provident, Ingrid; Eckel, Emily

2016-01-01

Work-related musculoskeletal disorders (WMSDs) related to computer work have become a serious public health concern. Literature revealed a positive association between computer use and WMSDs. The purpose of this evidence-based pilot project was to provide a series of evidence-based educational sessions on ergonomics to office computer workers to enhance the awareness of risk factors of WMSDs. Seventeen office computer workers who work for the National Board of Certification in Occupational Therapy volunteered for this project. Each participant completed a baseline and post-intervention ergonomics questionnaire and attended six educational sessions. The Rapid Office Strain Assessment and an ergonomics questionnaire were used for data collection. The post-intervention data revealed that 89% of participants were able to identify a greater number of risk factors and answer more questions correctly in knowledge tests of the ergonomics questionnaire. Pre- and post-intervention comparisons showed changes in work posture and behaviors (taking rest breaks, participating in exercise, adjusting workstation) of participants. The findings have implications for injury prevention in office settings and suggest that ergonomics education may yield positive knowledge and behavioral changes among computer workers.

Ergonomic, psychosocial factors and risks at work in informal mining

Directory of Open Access Journals (Sweden)

Milena Nunes Alves de Sousa

2015-09-01

Full Text Available The goal of this study was to identify ergonomic and psychosocial factors, and risks at informal work in the mining sector of the State of Paraíba, Brazil, from miners' perspective. A cross-sectional and descriptive study was conducted with 371 informal mining workers. They responded two questionnaires for assessing work performed in three dimensions: ergonomic factors; psychosocial factors; and occupational risks. The scores of the items of each dimension were added so that, the higher the score, the lower workers' satisfaction related to the area investigated. The results indicated that noise was common in the working environment (66%. Most workers (54.7% pointed out that the work was too hard and that it required attention and reasoning (85.7%. The workers emphasized the lack of training for working in mining (59.3% and few of them regarded the maintenance of the workplace as a component to prevent lumbago (32.3%. Risk of accidents was pointed out as the factor that needed increased attention in daily work (56.6%. All occupational risks were mentioned, including physical and chemical risks. There was significant correlation between age and occupational risks, indicating that the greater the age, the greater the perception of harmful agents (ρ = -0.23; p < 0.01. In the end, it was observed that, to a greater or lesser degree, all workers perceived ergonomic and psychosocial factors, and risks in informal mining. Length of service and age were the features that interfered significantly with the understanding of those factors and occupational risks.

Integrating the Ergonomics Techniques with Multi Criteria Decision Making as a New Approach for Risk Management: An Assessment of Repetitive Tasks -Entropy Case Study.

Science.gov (United States)

Khandan, Mohammad; Nili, Majid; Koohpaei, Alireza; Mosaferchi, Saeedeh

2016-01-01

Nowadays, the health work decision makers need to analyze a huge amount of data and consider many conflicting evaluation criteria and sub-criteria. Therefore, an ergonomic evaluation in the work environment in order to the control occupational disorders is considered as the Multi Criteria Decision Making (MCDM) problem. In this study, the ergonomic risks factors, which may influence health, were evaluated in a manufacturing company in 2014. Then entropy method was applied to prioritize the different risk factors. This study was done with a descriptive-analytical approach and 13 tasks were included from total number of employees who were working in the seven halls of an ark opal manufacturing (240). Required information was gathered by the demographic questionnaire and Assessment of Repetitive Tasks (ART) method for repetitive task assessment. In addition, entropy was used to prioritize the risk factors based on the ergonomic control needs. The total exposure score based on the ART method calculated was equal to 30.07 ±12.43. Data analysis illustrated that 179 cases (74.6% of tasks) were in the high level of risk area and 13.8% were in the medium level of risk. ART- entropy results revealed that based on the weighted factors, higher value belongs to grip factor and the lowest value was related to neck and hand posture and duration. Based on the limited financial resources, it seems that MCDM in many challenging situations such as control procedures and priority approaches could be used successfully. Other MCDM methods for evaluating and prioritizing the ergonomic problems are recommended.

Ergonomic risk factor identification for sewing machine operators through supervised occupational therapy fieldwork in Bangladesh: A case study.

Science.gov (United States)

Habib, Md Monjurul

2015-01-01

Many sewing machine operators are working with high risk factors for musculoskeletal health in the garments industries in Bangladesh. To identify the physical risk factors among sewing machine operators in a Bangladeshi garments factory. Sewing machine operators (327, 83% female), were evaluated. The mean age of the participants was 25.25 years. Six ergonomic risk factors were determined using the Musculoskeletal Disorders risk assessment. Data collection included measurements of sewing machine table and chair heights; this data was combined with information from informal interviews. Significant ergonomic risk factors found included the combination of awkward postures of the neck and back, repetitive hand and arm movements, poor ergonomic workstations and prolonged working hours without adequate breaks; these risk factors resulted in musculoskeletal complaints, sick leave, and switching jobs. One aspect of improving worker health in garment factories includes addressing musculoskeletal risk factors through ergonomic interventions.

Assessment of risk factors for musculoskeletal disorders using the Rapid Office Strain Assessment (ROSA Method and implementing ergonomics intervention programs in Sepah Bank

Directory of Open Access Journals (Sweden)

I. Nasiri

2015-07-01

.Conclusion: Using the ROSA technique was seemed to be beneficialto assess the ergonomic risk factors of office works, and the deficiencies in the workstation can be identified through this method. Moreover,by design and implementation of an educational intervention program along with engineering interventions which comply with the elements of this technique, the defects can be eliminated.

Novel ergonomic postural assessment method (NERPA) using product-process computer aided engineering for ergonomic workplace design.

Science.gov (United States)

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method's usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method.

Effect of systematic ergonomic hazard identification and control implementation on musculoskeletal disorder and injury risk.

Science.gov (United States)

Cantley, Linda F; Taiwo, Oyebode A; Galusha, Deron; Barbour, Russell; Slade, Martin D; Tessier-Sherman, Baylah; Cullen, Mark R

2014-01-01

This study aimed to examine the effect of an ergonomic hazard control (HC) initiative, undertaken as part of a company ergonomics standard, on worker injury risk. Using the company's ergonomic hazards database to identify jobs with and without ergonomic HC implementation and linking to individual job and injury histories, injury risk among person-jobs with HC implementation (the HC group) was compared to those without HC (NoHC group) using random coefficient models. Further analysis of the HC group was conducted to determine the effect of additional ergonomic hazards controlled on injury risk. Among 123 jobs at 17 plant locations, 347 ergonomic hazards were quantitatively identified during the study period. HC were implemented for 204 quantified ergonomic hazards in 84 jobs, impacting 10 385 persons (12 967 person-jobs). No HC were implemented for quantified ergonomic hazards in the remaining 39 jobs affecting 4155 persons (5046 person-jobs). Adjusting for age, sex, plant origin, and year to control for any temporal trend in injury risk, the relative risk (RR) for musculoskeletal disorder (MSD) was 0.85 and the RR for any injury or MSD was 0.92 in the HC compared to NoHC group. Among the HC group, each ergonomic hazard controlled was associated with risk reduction for MSD and acute injury outcomes (RR 0.93). Systematic ergonomic HC through participatory ergonomics, as part of a mandatory company ergonomics standard, is associated with MSD and injury risk reduction among workers in jobs with HC implemented.

Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design

Science.gov (United States)

Sanchez-Lite, Alberto; Garcia, Manuel; Domingo, Rosario; Angel Sebastian, Miguel

2013-01-01

Background Musculoskeletal disorders (MSDs) that result from poor ergonomic design are one of the occupational disorders of greatest concern in the industrial sector. A key advantage in the primary design phase is to focus on a method of assessment that detects and evaluates the potential risks experienced by the operative when faced with these types of physical injuries. The method of assessment will improve the process design identifying potential ergonomic improvements from various design alternatives or activities undertaken as part of the cycle of continuous improvement throughout the differing phases of the product life cycle. Methodology/Principal Findings This paper presents a novel postural assessment method (NERPA) fit for product-process design, which was developed with the help of a digital human model together with a 3D CAD tool, which is widely used in the aeronautic and automotive industries. The power of 3D visualization and the possibility of studying the actual assembly sequence in a virtual environment can allow the functional performance of the parts to be addressed. Such tools can also provide us with an ergonomic workstation design, together with a competitive advantage in the assembly process. Conclusions The method developed was used in the design of six production lines, studying 240 manual assembly operations and improving 21 of them. This study demonstrated the proposed method’s usefulness and found statistically significant differences in the evaluations of the proposed method and the widely used Rapid Upper Limb Assessment (RULA) method. PMID:23977340

Ergonomic assessments of three Idaho National Engineering Laboratory cafeterias

Energy Technology Data Exchange (ETDEWEB)

Ostrom, L.T.; Romero, H.A.; Gilbert, B.G.; Wilhelmsen, C.A.

1993-01-01

The Idaho National Engineering Laboratory is a Department of Energy facility that performs a variety of engineering and research projects. EG G Idaho is the prime contractor for the laboratory and, as such, performs the support functions in addition to technical, research, and development functions. As a part of the EG G Idaho Industrial Hygiene Initiative, ergonomic assessments were conducted at three Idaho National Engineering Laboratory Cafeterias. The purposes of the assessments were to determine whether ergonomic problems existed in the work places and, if so, to make recommendations to improve the work place and task designs. The study showed there were ergonomic problems in all three cafeterias assessed. The primary ergonomic stresses observed included wrist and shoulder stress in the dish washing task, postural stress in the dish washing and food preparation tasks, and back stress in the food handling tasks.

Ergonomic assessments of three Idaho National Engineering Laboratory cafeterias

Energy Technology Data Exchange (ETDEWEB)

Ostrom, L.T.; Romero, H.A.; Gilbert, B.G.; Wilhelmsen, C.A.

1993-05-01

The Idaho National Engineering Laboratory is a Department of Energy facility that performs a variety of engineering and research projects. EG&G Idaho is the prime contractor for the laboratory and, as such, performs the support functions in addition to technical, research, and development functions. As a part of the EG&G Idaho Industrial Hygiene Initiative, ergonomic assessments were conducted at three Idaho National Engineering Laboratory Cafeterias. The purposes of the assessments were to determine whether ergonomic problems existed in the work places and, if so, to make recommendations to improve the work place and task designs. The study showed there were ergonomic problems in all three cafeterias assessed. The primary ergonomic stresses observed included wrist and shoulder stress in the dish washing task, postural stress in the dish washing and food preparation tasks, and back stress in the food handling tasks.

A study on the ergonomic assessment in the workplace

Science.gov (United States)

Tee, Kian Sek; Low, Eugene; Saim, Hashim; Zakaria, Wan Nurshazwani Wan; Khialdin, Safinaz Binti Mohd; Isa, Hazlita; Awad, M. I.; Soon, Chin Fhong

2017-09-01

Ergonomics has gained attention and take into consideration by the workers in the different fields of works recently. It has given a huge impact on the workers comfort which directly affects the work efficiency and productivity. The workers have claimed to suffer from the painful postures and injuries in their workplace. Musculoskeletal disorders (MSDs) is the most common problem frequently reported by the workers. This problem occurs due to the lack of knowledge and alertness from the workers to the ergonomic in their surroundings. This paper intends to review the approaches and instruments used by the previous works of the researchers in the evaluation of the ergonomics. The two main assessment methods often used for ergonomic evaluation are Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). Popular devices are Inertial Measurement Units (IMU) and Microsoft Kinect.

Quantitative approaches to physical ergonomic issues encountered while assessing workplace designs

NARCIS (Netherlands)

Albin, T.J.

2014-01-01

Ergonomic and design practitioners routinely make assessments of the appropriateness of a workspace. For example, practitioners must answer questions such as: “will the user be at risk of injury, is the space high enough, wide enough and deep enough to accommodate the intended users, does the design

Development and evaluation of an office ergonomic risk checklist: ROSA--rapid office strain assessment.

Science.gov (United States)

Sonne, Michael; Villalta, Dino L; Andrews, David M

2012-01-01

The Rapid Office Strain Assessment (ROSA) was designed to quickly quantify risks associated with computer work and to establish an action level for change based on reports of worker discomfort. Computer use risk factors were identified in previous research and standards on office design for the chair, monitor, telephone, keyboard and mouse. The risk factors were diagrammed and coded as increasing scores from 1 to 3. ROSA final scores ranged in magnitude from 1 to 10, with each successive score representing an increased presence of risk factors. Total body discomfort and ROSA final scores for 72 office workstations were significantly correlated (R = 0.384). ROSA final scores exhibited high inter- and intra-observer reliability (ICCs of 0.88 and 0.91, respectively). Mean discomfort increased with increasing ROSA scores, with a significant difference occurring between scores of 3 and 5 (out of 10). A ROSA final score of 5 might therefore be useful as an action level indicating when immediate change is necessary. ROSA proved to be an effective and reliable method for identifying computer use risk factors related to discomfort. Copyright © 2011 Elsevier Ltd and The Ergonomics Society. All rights reserved.

An investigation of low ergonomics risk awareness, among staffs at early product development phase in Malaysia automotive industries

Science.gov (United States)

Aziz, Fazilah Abdul; Razali, Noraini; Najmiyah Jaafar, Nur

2016-02-01

Currently there are many automotive companies still unable to effectively prevent consequences of poor ergonomics in their manufacturing processes. This study purpose is to determine the surrounding factors that influence low ergonomics risk awareness among staffs at early product development phase in Malaysia automotive industry. In this study there are four variables, low ergonomic risk awareness, inappropriate method and tools, tight development schedule and lack of management support. The survey data were gathered from 245 respondents of local automotive companies in Malaysia. The data was analysed through multiple regression and moderated regression using the IBM SPSS software. Study results revealed that low ergonomic risk awareness has influenced by inappropriate method and tool, and tight development schedule. There were positive linear relationships between low ergonomic risk awareness and inappropriate method and tools, and tight development schedule. The more inappropriate method and tools applied; the lower their ergonomic risk awareness. The more tight development schedule is the lower ergonomic risk awareness. The relationship between low ergonomic risk awareness and inappropriate method and tools depends on staff's age, and education level. Furthermore the relationship between low ergonomic risk awareness and tight development schedule depends on staff's working experience and number of project involvement. The main contribution of this paper was identified the number of factors of low ergonomics risk awareness and offers better understanding on ergonomics among researchers and automotive manufacturer's employees during product development process.

Ergonomics Climate Assessment: A measure of operational performance and employee well-being.

Science.gov (United States)

Hoffmeister, Krista; Gibbons, Alyssa; Schwatka, Natalie; Rosecrance, John

2015-09-01

Ergonomics interventions have the potential to improve operational performance and employee well-being. We introduce a framework for ergonomics climate, the extent to which an organization emphasizes and supports the design and modification of work to maximize both performance and well-being outcomes. We assessed ergonomics climate at a large manufacturing facility twice during a two-year period. When the organization used ergonomics to promote performance and well-being equally, and at a high level, employees reported less work-related pain. A larger discrepancy between measures of operational performance and employee well-being was associated with increased reports of work-related pain. The direction of this discrepancy was not significantly related to work-related pain, such that it didn't matter which facet was valued more. The Ergonomics Climate Assessment can provide companies with a baseline assessment of the overall value placed on ergonomics and help prioritize areas for improving operational performance and employee well-being. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Inter-rater reliability of an observation-based ergonomics assessment checklist for office workers.

Science.gov (United States)

Pereira, Michelle Jessica; Straker, Leon Melville; Comans, Tracy Anne; Johnston, Venerina

2016-12-01

To establish the inter-rater reliability of an observation-based ergonomics assessment checklist for computer workers. A 37-item (38-item if a laptop was part of the workstation) comprehensive observational ergonomics assessment checklist comparable to government guidelines and up to date with empirical evidence was developed. Two trained practitioners assessed full-time office workers performing their usual computer-based work and evaluated the suitability of workstations used. Practitioners assessed each participant consecutively. The order of assessors was randomised, and the second assessor was blinded to the findings of the first. Unadjusted kappa coefficients between the raters were obtained for the overall checklist and subsections that were formed from question-items relevant to specific workstation equipment. Twenty-seven office workers were recruited. The inter-rater reliability between two trained practitioners achieved moderate to good reliability for all except one checklist component. This checklist has mostly moderate to good reliability between two trained practitioners. Practitioner Summary: This reliable ergonomics assessment checklist for computer workers was designed using accessible government guidelines and supplemented with up-to-date evidence. Employers in Queensland (Australia) can fulfil legislative requirements by using this reliable checklist to identify and subsequently address potential risk factors for work-related injury to provide a safe working environment.

Ergonomic workplace assessment in orthotic and prosthetic workshops.

Science.gov (United States)

Salmani Nodooshan, H; Koohi Booshehri, S; Daneshmandi, H; Choobineh, A R

2016-10-17

In Iranian orthotic and prosthetic workshops, the majority of activities are carried out by manpower and the tasks are labor-intensive. In these workshops, ergonomic aspects of working conditions are seldom considered. This study was conducted in orthotic and prosthetic workshops with the objectives of determination of prevalence rate of MSDs among employees and assessment of ergonomics working conditions. In this cross-sectional study, all employees (n = 42; 29 males and 13 females) in 11 active orthotic and prosthetic production centers of Shiraz city participated. Data were collected using Nordic Musculoskeletal disorders Questionnaire (NMQ) and observational technique by an ergonomics checklist for assessment of working conditions. The means (SD) of age and job tenure (years) in the study individuals were 37.26 (10.21) and 12.8 (9.39), respectively. The most prevalent MSD symptoms in the past 12 months were reported in the lower back (42.9%), shoulders (40.5%) and knees (40.5%). Working conditions assessment showed that the main ergonomic problems in the workshops studied originated from awkward working posture, improper workstation design, poorly designed hand tools and incorrect manual material handling. Any interventional program for working conditions improvement should, therefore, focus on these areas.

Development of a method to assess compliance with ergonomic posture in dental students

Science.gov (United States)

Garcia, Patrícia Petromilli Nordi Sasso; Wajngarten, Danielle; Campos, Juliana Alvares Duarte Bonini

2018-01-01

CONTEXT: The ergonomic posture protocol is extremely important for the maintenance of occupational health in dentistry. The lack of compliance with this protocol results in a high risk of developing musculoskeletal disorders. AIMS: This study developed a direct observation method for the evaluation of dental student compliance with ergonomic posture protocol. SUBJECTS AND METHODS: The method is named compliance assessment of dental ergonomic posture requirements (CADEP). During the development of the method, 14 items were elaborated considering the theory of dental ergonomics. Each item should be classified as appropriate, partially appropriate, or inappropriate. After evaluation, all item values should be added, and the final score expressed as the percent of compliance with correct postures, with a score range of 0%–100%. STATISTICAL ANALYSIS USED: The reliability of CADEP was assessed through intra- and interobserver reproducibility. For the CADEP application, 73 senior year students from the undergraduate course in dentistry were evaluated. The intra- and interexaminer concordance was estimated using the intraclass correlation coefficient (ρ). A descriptive statistical analysis was performed. RESULTS: The reproducibility of evaluator 1 (ρ =0.90; confidence interval [CI] 95%: 0.83–0.94), evaluator 2 (ρ = 0.83; CI 95%: 0.70–0.90), the interexaminer in the first evaluation (ρ = 0.81; CI 95%:0.67–0.89), and in the second one (ρ = 0.76; CI 95%: 0.59–0.87) was classified as good. In the analysis of the compliance, it was verified that moderate compliance was the most prevalent among the evaluated students (65.6%, CI 95%: 60.3%–70.7%). CONCLUSIONS: CADEP was valid and reliable for the assessment of dentistry students’ compliance regarding ergonomic posture requirements. PMID:29693025

Ergonomics in Dentistry

Directory of Open Access Journals (Sweden)

Dargahi H

2010-01-01

Full Text Available Background and Aims: There are several risk factors in dentistry professional environment. Carelessness about occupational health regulation endangers dentist's life. Erconomics in dentistry is a scientific approach which introduces the latest ergonomic principles in dental profession. It discusses about physical and mental stresses. Ergonomic programs eliminate dentist physical and mental challenges and provide practical solution to establish efficient and comforting environment. Materials and Methods: This study reviewed the role and effectiveness of Ergonomics in dental profession. We used related journals, books and ergonomics websites to write this article. Conclusion: Many of researchers believe that awkward body posture and low movement are the sources of occupational disorders. Therefore, knowledge of ergonomics risk factors in dental office design is very important. Dentist's body posture and dental equipment evaluations are important factors in dental ergonomics. The most logical approach to design dental equipment for utilizing ergonomics principles is consideration of the dentist posture and type of movements and activities. In conclusion, dentists should be informed about dental ergonomics regulation and its different aspects. Furthermore, academic developments and research projects can be useful in this area.

The development and validation of an ergonomics index for assessing tractor operator work place

OpenAIRE

Barbieri, Juan Paulo; Schlosser, José Fernando; Farias, Marcelo Silveira de; Negri, Giácomo Müller; Oliveira, Luis Fernando Vargas de

2018-01-01

ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996), which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015) and ABNT ...

Physical and psychosocial ergonomic risk factors for low back pain in automobile manufacturing workers.

Science.gov (United States)

Vandergrift, Jonathan L; Gold, Judith E; Hanlon, Alexandra; Punnett, Laura

2012-01-01

To examine the association between ergonomic physical and psychosocial exposures and the risk of prevalent and incident low back pain (LBP) in a longitudinal cohort of automobile manufacturing workers. Ergonomic exposure intensity and LBP presence were determined through questionnaires at baseline (n=1181) and to workers in the same job 1 year later (n=505). Models were constructed using log-binomial regression with special attention to interactions between ergonomic exposures. Awkward back posture (prevalence ratio (PR) 1.12, 95% CI 1.07 to 1.17), hand force (PR 1.06, 95% CI 1.02 to 1.10), physical effort (PR 1.10, 95% CI 1.04 to 1.16) and whole body vibration (PR 1.04, 95% CI 1.01 to 1.08) were each associated cross-sectionally with LBP. Awkward back posture (RR 1.13, 95% CI 0.98 to 1.31) and hand force (RR 1.07, 95% CI 0.93 to 1.22) also predicted incident LBP, although estimates were statistically less precise. Neither job control, psychological demands, nor job strain was independently related to risk of incident LBP. Among participants reporting high physical ergonomic exposures and moderate to high job control, increasing job demands was associated with a reduced LBP risk (RR 0.72, 95% CI 0.52 to 1.00). Among participants reporting high physical exposures and low job control, psychological demands was associated with an increased LBP risk (RR 1.30, 95% CI 1.02 to 1.66). Psychosocial workplace interventions for LBP should prioritise jobs in which there are high physical ergonomic exposures. Future studies of LBP should examine the interactions between physical ergonomic risk factors.

Ergonomic assessment of musculoskeletal disorders risk among the computer users by Rapid Upper Limb Assessment method

Directory of Open Access Journals (Sweden)

Ehsanollah Habibi

2016-01-01

Conclusion: This study result showed that frequency of musculoskeletal problems in the neck, back, elbow, and wrist was generally high among our subjects, and ergonomic interventions such as computer workstation redesign, users educate about ergonomic principles computer with work, reduced working hours in computers with work must be carried out.

Ergonomic sustainability based on the ergonomic maturity level measurement.

Science.gov (United States)

Vidal, Mario Cesar; Guizze, Carmen Lucia Campos; Bonfatti, Renato José; Silva e Santos, Marcello

2012-01-01

This paper aims at the application of an ergonomic maturity model (EMM), in order to assess the ergonomic sustainability outreach of ergonomic actions. This proposition was motivated by the widespread sensation that the development of the discipline, its educational devices and related practices depends on the attitude of ergonomics practitioners rather than environmental macroergonomic conditions. Maturity modeling in this paper is undertaken as a tool for ergonomic practitioners. Thus, its foundations were uprooted from diverse fields: Clinic Psychology, Quality Management and Project Management. The paper brings about a detailled explanation of this ergonomic maturity tool. The empirical part is fulfilled by the examination - using the EMM - of four emblematic cases excerpted from our research lab ergonomic portfolio.

Inter-rater reliability of PATH observations for assessment of ergonomic risk factors in hospital work.

Science.gov (United States)

Park, Jung-Keun; Boyer, Jon; Tessler, Jamie; Casey, Jeffrey; Schemm, Linda; Gore, Rebecca; Punnett, Laura

2009-07-01

This study examined the inter-rater reliability of expert observations of ergonomic risk factors by four analysts. Ten jobs were observed at a hospital using a newly expanded version of the PATH method (Buchholz et al. 1996), to which selected upper extremity exposures had been added. Two of the four raters simultaneously observed each worker onsite for a total of 443 observation pairs containing 18 categorical exposure items each. For most exposure items, kappa coefficients were 0.4 or higher. For some items, agreement was higher both for the jobs with less rapid hand activity and for the analysts with a higher level of ergonomic job analysis experience. These upper extremity exposures could be characterised reliably with real-time observation, given adequate experience and training of the observers. The revised version of PATH is applicable to the analysis of jobs where upper extremity musculoskeletal strain is of concern.

Effectiveness of an Ergonomics Training Program on Decreasing Work-Related Musculoskeletal Disorders Risk among Video Display Terminals Users

Directory of Open Access Journals (Sweden)

Yahya Rasoulzadeh

2012-07-01

Full Text Available loskeletaldisorders (WMSDs among the video display terminals (VDTs users, Prevention ofthese disorders among this population is a challenge for many workplaces today. ErgonomicallyImproving of VDT workstations may be an effective and applicable way to decrease the risk ofWMSDs. This study evaluated the effect of an ergonomics-training program on the risk ofWMSDs among VDT users.Methods: This study was conducted among a large group of computer users in SAPCO industrialcompany, Tehran, Iran (84 persons with 29.85±11.2 years of age and with 6.98±2.54 years ofexperience. An active ergonomics-training program was designed and implemented during 14days to empower the VDT users and involve them in improving their workstations. The directobservational RULA (Rapid Upper Limb Assessment method was used in pre and postinterventionstages to evaluate the risk of WMSDs among participants.Results: The RULA final scores showed that 18.8 % of VDT users were at action level 2, 63.5%at action level 3 and 17.6% at action level 4 before any intervention. In addition, 8.2% of userswere at action level 1, 44.7% at action level 2, 42.4% at action level 3 and 4.7% at action level 4 atthe post-intervention stage. The results of Wilcoxon statistical test indicated that RULA scoresere decreased significantly after interventions (P < 0.05 and consequently, decreased risk ofWMSDs.Conclusion: Active ergonomics training programs can be used effectively to improve the VDTworkstations and decrease the risk of musculoskeletal disorders among VDT users.

Ergonomic positioning or equipment for treating carpal tunnel syndrome.

Science.gov (United States)

O'Connor, Denise; Page, Matthew J; Marshall, Shawn C; Massy-Westropp, Nicola

2012-01-18

Non-surgical treatment, including ergonomic positioning or equipment, are sometimes offered to people experiencing mild to moderate symptoms from carpal tunnel syndrome (CTS). The effectiveness and duration of benefit from ergonomic positioning or equipment interventions for treating CTS are unknown. To assess the effects of ergonomic positioning or equipment compared with no treatment, a placebo or another non-surgical intervention in people with CTS. We searched the Cochrane Neuromuscular Disease Group Specialized Register (14 June 2011), the Cochrane Central Register of Controlled Trials (CENTRAL) (2011, Issue 2, in The Cochrane Library), MEDLINE (1966 to June 2011), EMBASE (1980 to June 2011), CINAHL Plus (1937 to June 2011), and AMED (1985 to June 2011). We also reviewed the reference lists of randomised or quasi-randomised trials identified from the electronic search. Randomised or quasi-randomised controlled trials comparing ergonomic positioning or equipment with no treatment, placebo or another non-surgical intervention in people with CTS. Two review authors independently selected trials for inclusion, extracted data and assessed risk of bias of included studies. We calculated risk ratios (RR) and mean differences (MD) with 95% confidence intervals (CI) for the primary and secondary outcomes. We pooled results of clinically and statistically homogeneous trials, where possible, to provide estimates of the effect of ergonomic positioning or equipment. We included two trials (105 participants) comparing ergonomic versus placebo keyboards. Neither trial assessed the primary outcome (short-term overall improvement) or adverse effects of interventions. In one small trial (25 participants) an ergonomic keyboard significantly reduced pain after 12 weeks (MD -2.40; 95% CI -4.45 to -0.35) but not six weeks (MD -0.20; 95% CI -1.51 to 1.11). In this same study, there was no difference between ergonomic and standard keyboards in hand function at six or 12 weeks or palm

The development and validation of an ergonomics index for assessing tractor operator work place

Directory of Open Access Journals (Sweden)

Juan Paulo Barbieri

2018-02-01

Full Text Available ABSTRACT: This study aimed to develop and validate an ergonomics index for the operator workplace assessment of agricultural tractors sold in the Brazilian market. To develop the ergonomics index, the operator work places were assessed for compliance with current, national and international, safety and ergonomics standards. The following standards were analyzed to develop ergonomics index: ISO 15077 (1996, which regulates the position of operator controls; ABNT NBR ISO 4254-1(2015 and ABNT NBR ISO 4252 (2011, which regulate the access to operator workplaces; and NR 12 (2010, which determines the mandatory items of operator workplaces.Thirty-four operator work places of 152 models of new agricultural tractors sold in the Brazilian market were analyzed in this study. Ergonomics index was developed and validated using these standards, and the findings enabled the ranking of agricultural tractors. Therefore, the proposed ergonomics index proved feasible and may be applied to other agricultural machines.

Ergonomic analysis for the assessment of the risk of work-related musculoskeletal disorder in forestry operations

Directory of Open Access Journals (Sweden)

Raimondo Gallo

2013-09-01

Full Text Available The risk to run into a Work-Related Musculoskeletal Disorder (WMSD is very high when operating in the primary sector. As a matter of fact the professional illnesses related to the WMSD in Italy are increasing. Nowadays the assessment of the WMSD in the primary sector is performed mainly in the agricultural sector, considering different agronomical activities; for the forestry sector, only few documents reported an ergonomic evaluation. The lack of available information on this topic in the forestry sector, as well as the similarity with the agricultural sector, drives the interest to the assessment of the conditions that expose workers to WMSD risks in forestry operations. Four different assessment approaches were applied in this study. These tools permitted to classify which are the exposures and if there is the presence of WMSD risk for forest operators. The approaches are respectively the OCRA checklist and the RNLE equation, both recognized as ISO standards, as well as OWAS and REBA, recommended by ISO standards. The first approach focusses on the risk due to repetitive and stressed movements, while the second evaluates the risk of injures due to the manual movement of loads. Meanwhile OWAS and REBA detect the possibility of injures due to wrong postures during the work. These approaches were applied for the cutting operations with chainsaw. Since the evaluation requires high levels of attention and also because it was necessary to gain a good level of safety for the surveyor, a digital camera was used to film the operative activities. Then, the movies were analysed in office. Aim of the research is to analyse if it is possible to apply the approaches suggested by ISO standards in order to assess the most dangerous activities that, when not properly carried out, could be the cause of WMSD in forestry operations. The study showed that during the use of the chainsaw the index of risk of professional injures was overpassed several times

A method for Effect Modifier Assessment in ergonomic intervention research – The EMA method

DEFF Research Database (Denmark)

Edwards, Kasper; Winkel, Jørgen

2016-01-01

Introduction: Ergonomic intervention research includes studies in which researchers arrange (or follow) changes in working conditions to determine the effects in risk factors and/or health. Often this research takes place at workplaces and not in a controlled environment of a laboratory. The effe......Introduction: Ergonomic intervention research includes studies in which researchers arrange (or follow) changes in working conditions to determine the effects in risk factors and/or health. Often this research takes place at workplaces and not in a controlled environment of a laboratory...... of the literature revealed lack of or poor consideration of effect modifiers in ergonomic intervention research. We present a method that has been developed over the course of several years parallel to intervention studies in healthcare. Material and methods: The EMA method is a type of group interview including 3...... sources. Conclusion: The EMA method seems to offer a feasible procedure to obtain significant knowledge on potential effect modifiers in ergonomic intervention research. However, further development and validation is suggested....

Usability of the Upper Limb Risk Assessment (UPLIRA Method for Assessing the Risk Factors of Upper Limb Disorders

Directory of Open Access Journals (Sweden)

Abd Razak Noor Syafiqa

2017-01-01

Full Text Available It is important to design ergonomic methods or assessment with a high usability and good ergonomic features, so the method is easily adaptable to the task and the workplace environment. Usability is a measurement on how well the user can use that functionality. The study converged on testing the usability of the new tools for assessing ULDs namely as Upper Limb Risk Assessment (UPLIRA. The UPLIRA method was evaluated by 6 students (3 undergraduate students and 3 postgraduates students from University Tun Hussein Onn Malaysia (UTHM who are conducting research in ergonomic. From the feedback survey of UPLIRA method, the observers agree that the prototype of UPLIRA tool was applicable to workplace assessment for the wide range of jobs/task (mean 4.00, SD:0.632 with 83% percentage of agreement . They also indicate that UPLIRA method is quick to use (mean 3.67, SD:1.033 with percentage agreement of 67%. The scoring system and action level was rated as easy to understand (mean 3.67, SD:1.211 and (mean 4.17, SD:0.408. Conclusively, the UPLIRA method was rated as straightforward to use, applicable to wide range of tasks, and time saving as assessment can be completed within 10 minutes. In addition, the UPLIRA assessment covers an extensive range of physical, psychosocial, work organizational, and individual risk factors.

REVEAL: Reconstruction, Enhancement, Visualization, and Ergonomic Assessment for Laparoscopy

Science.gov (United States)

2008-08-01

2007) Ergonomic risk of assisting in minimally invasive surgery, Annual conference of SAGES 2008 Park AE, Meenaghan N, Lee TH, Seagull FJ, Lee G...of NOTES techniques: a study of physical and mental workload, body movement and posture Adrian Park, Gyusung Lee, Carlos Godinez, F Jacob Seagull

The FITS model office ergonomics program: a model for best practice.

Science.gov (United States)

Chim, Justine M Y

2014-01-01

An effective office ergonomics program can predict positive results in reducing musculoskeletal injury rates, enhancing productivity, and improving staff well-being and job satisfaction. Its objective is to provide a systematic solution to manage the potential risk of musculoskeletal disorders among computer users in an office setting. A FITS Model office ergonomics program is developed. The FITS Model Office Ergonomics Program has been developed which draws on the legislative requirements for promoting the health and safety of workers using computers for extended periods as well as previous research findings. The Model is developed according to the practical industrial knowledge in ergonomics, occupational health and safety management, and human resources management in Hong Kong and overseas. This paper proposes a comprehensive office ergonomics program, the FITS Model, which considers (1) Furniture Evaluation and Selection; (2) Individual Workstation Assessment; (3) Training and Education; (4) Stretching Exercises and Rest Break as elements of an effective program. An experienced ergonomics practitioner should be included in the program design and implementation. Through the FITS Model Office Ergonomics Program, the risk of musculoskeletal disorders among computer users can be eliminated or minimized, and workplace health and safety and employees' wellness enhanced.

The assessment of visually impaired persons working capacities using electrophysiological and ophthalmic ergonomics methods

Directory of Open Access Journals (Sweden)

M. I. Razumovsky

2014-07-01

Full Text Available Aim was to analyze working capacities of visually impaired persons by means of complex electrophysiological and ophthalmic ergonomics eye examination.Materials and methods. Standard clinical ophthalmologic examination (visual acuity measurement, refractometry, biomicroscopy, ophthalmoscopy as well as electrophysiological (electrooculography, electrical sensitivity of the eye, critical flicker fusion frequency and ophthalmic ergonomics tests (accommodation measurement, professional testing using automated system «Proftest-1» were performed.Results. Complex electrophysiological and ophthalmic ergonomics tests were performed in 20 visually impaired persons. Their results revealed direct correlation between electrophysiological and ophthalmic ergonomics indices.Conclusion. Working capacities of visually impaired persons can be assessed reliably using complex electrophysiological and ophthalmic ergonomics eye examination only.

The assessment of visually impaired persons working capacities using electrophysiological and ophthalmic ergonomics methods

Directory of Open Access Journals (Sweden)

M. I. Razumovsky

2014-01-01

Full Text Available Aim was to analyze working capacities of visually impaired persons by means of complex electrophysiological and ophthalmic ergonomics eye examination.Materials and methods. Standard clinical ophthalmologic examination (visual acuity measurement, refractometry, biomicroscopy, ophthalmoscopy as well as electrophysiological (electrooculography, electrical sensitivity of the eye, critical flicker fusion frequency and ophthalmic ergonomics tests (accommodation measurement, professional testing using automated system «Proftest-1» were performed.Results. Complex electrophysiological and ophthalmic ergonomics tests were performed in 20 visually impaired persons. Their results revealed direct correlation between electrophysiological and ophthalmic ergonomics indices.Conclusion. Working capacities of visually impaired persons can be assessed reliably using complex electrophysiological and ophthalmic ergonomics eye examination only.

Ergonomic risk assessment with DesignCheck to evaluate assembly work in different phases of the vehicle development process.

Science.gov (United States)

Winter, Gabriele; Schaub, Karlheinz G; Großmann, Kay; Laun, Gerhard; Landau, Kurt; Bruder, Ralph

2012-01-01

Occupational hazards exist, if the design of the work situation is not in accordance with ergonomic design principles. At assembly lines ergonomics is applied to the design of work equipment and tasks and to work organisation. The ignoring of ergonomic principles in planning and design of assembly work leads to unfavourable working posture, action force and material handling. Disorders of the musculoskeletal system are of a common occurrence throughout Europe. Musculoskeletal disorders are a challenge against the background of disabled workers. The changes in a worker's capability have to be regarded in the conception of redesigned and new assembly lines. In this way ergonomics becomes progressively more important in planning and design of vehicles: The objective of ergonomic design in different stages of the vehicles development process is to achieve an optimal adaptation of the assembly work to workers. Hence the ergonomic screening tool "Design Check" (DC) was developed to identify ergonomic deficits in workplace layouts. The screening-tool is based on the current ergonomic state of the art in the design of physical work and relevant EU legal requirements. It was tested within a federal German research project at selected work stations at the assembly lines at Dr.-Ing. h.c. F. Porsche AG / Stuttgart. Meanwhile the application of the screening-tool DC is transferred in other parts of the Porsche AG, Stuttgart. It is also realized as an ergonomic standard method to perform assembly work in different phases of the vehicle development process.

Ergonomics SA publishing requirements and submission guidelines

African Journals Online (AJOL)

rhodes

This study assessed the ergonomic risk factors, and occupational health and ... health hazards such as increased mortality, dermal contamination, depression in cholinesterase level, fetal abnormalities spontaneous abortion among pregnant women ..... Another study in China showed the correlation between pesticide in ...

Ergonomic intervention for employed persons with rheumatic conditions.

Science.gov (United States)

Allaire, Saralynn J; Backman, Catherine L; Alheresh, Rawan; Baker, Nancy A

2013-01-01

Prior articles in this series on employment and arthritis have documented the major impact arthritis and other rheumatic conditions have on employment. As expected, physically demanding job tasks, including hand use, are substantial risk factors for work limitation. Computer use has been increasing. People with arthritis may choose occupations involving extensive computer use to avoid occupations with other physical demands. But studies show many people with arthritis conditions have difficulty using computers.Ergonomic assessment and implementation helps relieve the physical and other demands of jobs. The Ergonomic Assessment Tool for Arthritis (EATA) is specifically for people with arthritis conditions. Since the EATA can be conducted off worksite, it is feasible to use with workers not wishing to disclose their condition to their employer. Available research supports the effectiveness of ergonomic intervention as a viable method to reduce work limitation for persons with arthritis. Some workers will need additional vocational intervention to remain employed long term. However, ergonomic intervention is a useful first step, as it promotes awareness of arthritis effects on work activities. Assisting workers with arthritis or other rheumatic conditions to use ergonomics to enhance their ability to work well should be an important aspect of managing these conditions.

Ergonomic initiatives at Inmetro: measuring occupational health and safety.

Science.gov (United States)

Drucker, L; Amaral, M; Carvalheira, C

2012-01-01

This work studies biomechanical hazards to which the workforce of Instituto Nacional de Metrologia, Qualidade e Tecnologia Industrial (Inmetro) is exposed. It suggests a model for ergonomic evaluation of work, based on the concepts of resilience engineering which take into consideration the institute's ability to manage risk and deal with its consequences. Methodology includes the stages of identification, inventory, analysis, and risk management. Diagnosis of the workplace uses as parameters the minimal criteria stated in Brazilian legislation. The approach has several prospectives and encompasses the points of view of public management, safety engineering, physical therapy and ergonomics-oriented design. The suggested solution integrates all aspects of the problem: biological, psychological, sociological and organizational. Results obtained from a pilot Project allow to build a significant sample of Inmetro's workforce, identifying problems and validating the methodology employed as a tool to be applied to the whole institution. Finally, this work intends to draw risk maps and support goals and methods based on resiliency engineering to assess environmental and ergonomic risk management.

Comparative ergonomic assessment of manual wheelchairs by paraplegic users.

Science.gov (United States)

Gil-Agudo, Angel; Solís-Mozos, Marta; del-Ama, Antonio J; Crespo-Ruiz, Beatriz; de la Peña-González, Ana Isabel; Pérez-Nombela, Soraya

2013-07-01

The aim of the present study was to describe and test the reliability of a comprehensive product-centered approach to assessing functional performance and wheelchair user perceptions on device ergonomics and satisfaction of performance. A pilot study was implemented using this approach to evaluate differences among four manual wheelchairs. Six wheelchair users with complete spinal cord injury (SCI) at the thoracic level and with no previous upper limbs impairment were recruited for this study. After finishing circuit tasks, subjects were asked to complete a questionnaire about ergonomic wheelchair characteristics (manoeuvrability, stability, comfort and ease of propulsion) and satisfaction about task performance. On the other hand, objective data were recorded during user performance as the time required to complete each test, kinetic wheelchair propulsion data obtained with two SMARTWheels® and physiological parameters (heart rate and physiological index). Kuschall Champion® and Otto Bock Voyage® wheelchairs were ranked best for most ergonomic aspects specially in manoeuvrability (p importance of looking both kinds of information, user perception and user functional performance when evaluating a wheelchair or comparing across devices.

30 years of ergonomics at 3M: a case study.

Science.gov (United States)

Larson, N; Wick, H

2012-01-01

The added value of the Ergonomics Program at 3M was found to be improved employee safety, compliance with regulations and reduction of work-related illness, increases in productivity, and quality and operating efficiency. This paper describes the thirty years of existence of this program. For the first twenty years, the program objectives were to: respond to requests for assistance related to work-related musculoskeletal disorder (WMSD) concerns, raise employee awareness of MSDs and ergonomics; educate engineers in ergonomics design; and develop ergonomics teams at manufacturing locations. Since the year 2000, 3M's Ergonomics Program has been in transition from a US-centric and corporate-based technical-expertled program to a global program applying participatory ergonomics strategies within a macroergonomics framework. During that transition, the existing program requirements were revised, new methods and program tools were created, and expectations for implementation at the manufacturing locations clarified. This paper focuses on the company's manufacturing ergonomics program activities during the past ten years and includes specifics of the program's objectives, risk assessment reduction process, and ergonomics technical expertise development. The main benefit achieved throughout the company is reducing employee injury while also increasing productivity and operating efficiency.

Ergonomics in Dentistry

OpenAIRE

Dargahi H; Saraji J; Sadr J; Sadri G

2010-01-01

Background and Aims: There are several risk factors in dentistry professional environment. Carelessness about occupational health regulation endangers dentist's life. Erconomics in dentistry is a scientific approach which introduces the latest ergonomic principles in dental profession. It discusses about physical and mental stresses. Ergonomic programs eliminate dentist physical and mental challenges and provide practical solution to establish efficient and comforting environment. Materi...

Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review

Directory of Open Access Journals (Sweden)

Simone De Sio

2018-01-01

Full Text Available Introduction Dental practitioners are exposed to different occupational hazards during the course of their professional activity, such as physical, chemical, biological, ergonomic factors. The ergonomic hazards, caused by strained posture and prolonged repetitive movements, can induce musculoskeletal disorders. It occurs in 54–93% of dental professionals and involve the spine, shoulder and hand-wrist tract. Through a systematic review of international literature, we analyzed specific ergonomic risk factors and preventive measures of musculoskeletal disorders in professional dental activity. Methods This systematic review is coherent with the PRISMA statement. The scientific research on the major online databases was based on the following keywords: dentist, prevention, ergonomic, dentistry, musculoskeletal, neck pain, posture, ergonomics, work and occupational. The studies included in this review focus on disorders related to ergonomics and on the most effective preventive measures to be adopted. No restrictions were applied for language or publication type. We excluded reports not related to ergonomic prevention in dentistry, reports of minor academic significance, editorial articles, individual contributions, and studies published in scientific conferences. Results Online research indicated 4188 references: PubMed (2919, Scopus (1257 e Cochrane Library (12. We excluded 3012 of these, because they were unrelated to ergonomics theme and 187 due to duplication. From the remaining 989 studies, 960 papers did not meet inclusion criteria and they were excluded. Therefore, we analyzed 29 articles, including 16 narrative reviews and 13 original article. The main risk factor for the development of musculoskeletal disorders found in our analysis is static posture adopted during work, highlighted in 87.5% of reviews and 84% of original articles. With regard to preventive measures, 75% of the reviews highlighted the importance of stretching after each

Ergonomic risk and preventive measures of musculoskeletal disorders in the dentistry environment: an umbrella review.

Science.gov (United States)

De Sio, Simone; Traversini, Veronica; Rinaldo, Francesca; Colasanti, Valerio; Buomprisco, Giuseppe; Perri, Roberto; Mormone, Federica; La Torre, Giuseppe; Guerra, Fabrizio

2018-01-01

Dental practitioners are exposed to different occupational hazards during the course of their professional activity, such as physical, chemical, biological, ergonomic factors. The ergonomic hazards, caused by strained posture and prolonged repetitive movements, can induce musculoskeletal disorders. It occurs in 54-93% of dental professionals and involve the spine, shoulder and hand-wrist tract. Through a systematic review of international literature, we analyzed specific ergonomic risk factors and preventive measures of musculoskeletal disorders in professional dental activity. This systematic review is coherent with the PRISMA statement. The scientific research on the major online databases was based on the following keywords: dentist, prevention, ergonomic, dentistry, musculoskeletal, neck pain, posture, ergonomics, work and occupational. The studies included in this review focus on disorders related to ergonomics and on the most effective preventive measures to be adopted. No restrictions were applied for language or publication type. We excluded reports not related to ergonomic prevention in dentistry, reports of minor academic significance, editorial articles, individual contributions, and studies published in scientific conferences. Online research indicated 4188 references: PubMed (2919), Scopus (1257) e Cochrane Library (12). We excluded 3012 of these, because they were unrelated to ergonomics theme and 187 due to duplication. From the remaining 989 studies, 960 papers did not meet inclusion criteria and they were excluded. Therefore, we analyzed 29 articles, including 16 narrative reviews and 13 original article. The main risk factor for the development of musculoskeletal disorders found in our analysis is static posture adopted during work, highlighted in 87.5% of reviews and 84% of original articles. With regard to preventive measures, 75% of the reviews highlighted the importance of stretching after each working session and at the end of the working day

Development of an Ergonomics Checklist for Investigation of Work-Related Whole-Body Disorders in Farming - AWBA: Agricultural Whole-Body Assessment.

Science.gov (United States)

Kong, Y K; Lee, S J; Lee, K S; Kim, G R; Kim, D M

2015-10-01

Researchers have been using various ergonomic tools to study occupational musculoskeletal diseases in industrial contexts. However, in agricultural work, where the work environment is poorer and the socio-psychological stress is high due to the high labor intensities of the industry, current research efforts have been scarce, and the number of available tools is small. In our preliminary studies, which focused on a limited number of body parts and other working elements, we developed separate evaluation tools for the upper and lower extremities. The current study was conducted to develop a whole-body ergonomic assessment tool for agricultural work that integrates the existing assessment tools for lower and upper extremities developed in the preliminary studies and to verify the relevance of the integrated assessment tool. To verify the relevance of the Agricultural Whole-Body Assessment (AWBA) tool, we selected 50 different postures that occur frequently in agricultural work. Our results showed that the AWBA-determined risk levels were similar to the subjective risk levels determined by experts. In addition, as the risk level increased, the average risk level increased to a similar extent. Moreover, the differences in risk levels between the AWBA and expert assessments were mostly smaller than the differences in risk levels between other assessment tools and the expert assessments in this study. In conclusion, the AWBA tool developed in this study was demonstrated to be appropriate for use as a tool for assessing various postures commonly assumed in agricultural work. Moreover, we believe that our verification of the assessment tools will contribute to the enhancement of the quality of activities designed to prevent and control work-related musculoskeletal diseases in other industries.

The impact of ergonomic work environment exposures on the risk of disability pension: Prospective results from DWECS/DREAM

DEFF Research Database (Denmark)

Labriola, Merete; Feveile, Helene; Christensen, Karl B

2009-01-01

The objectives were to identify the impact of ergonomic work environment exposures on the risk of disability pension. A representative sample of 8475 employees of the total working population in Denmark were interviewed regarding work environment exposures and followed in a national register...... with data on granted disability pension. For women, approximately 34% of the disability pension cases were attributable to ergonomic work environment exposures. For men, 21% of the disability pension cases were attributable to ergonomic work environment. Ergonomic work environment, especially physically...... demanding work, working with hands lifted and repetitive work, are areas of intervention at the workplace that can facilitate and prolong labour market participation. The study provides estimates for the association between ergonomic exposures at work and administrative, cost-related measures of work...

Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

International Nuclear Information System (INIS)

Hashim, Yusof bin; Taha, Zahari bin

2015-01-01

Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger’s injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. The research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p<0.05and T-statistics, t>1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents

Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

Energy Technology Data Exchange (ETDEWEB)

Hashim, Yusof bin [Faculty of Industrial Sciences and Technology, Universiti Malaysia Pahang, Gambang 26300 Kuantan, Pahang (Malaysia); Taha, Zahari bin [Faculty of Manufacturing Engineering, Malaysia Pahang, 26600 Pekan, Pahang (Malaysia)

2015-02-03

Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger’s injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. The research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p<0.05and T-statistics, t>1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents.

Partial least square method for modelling ergonomic risks factors on express bus accidents in the east coast of peninsular west Malaysia

Science.gov (United States)

Hashim, Yusof bin; Taha, Zahari bin

2015-02-01

Public, stake holders and authorities in Malaysian government show great concern towards high numbers of passenger's injuries and passengers fatalities in express bus accident. This paper studies the underlying factors involved in determining ergonomics risk factors towards human error as the reasons in express bus accidents in order to develop an integrated analytical framework. Reliable information about drivers towards bus accident should lead to the design of strategies intended to make the public feel safe in public transport services. In addition there is an analysis of ergonomics risk factors to determine highly ergonomic risk factors which led to accidents. The research was performed in east coast of peninsular Malaysia using variance-based structural equation modeling namely the Partial Least Squares (PLS) regression techniques. A questionnaire survey was carried out at random among 65 express bus drivers operating from the city of Kuantan in Pahang and among 49 express bus drivers operating from the city of Kuala Terengganu in Terengganu to all towns in the east coast of peninsular west Malaysia. The ergonomic risks factors questionnaire is based on demographic information, occupational information, organizational safety climate, ergonomic workplace, physiological factors, stress at workplace, physical fatigue and near miss accidents. The correlation and significant values between latent constructs (near miss accident) were analyzed using SEM SmartPLS, 3M. The finding shows that the correlated ergonomic risks factors (occupational information, t=2.04, stress at workplace, t = 2.81, physiological factor, t=2.08) are significant to physical fatigue and as the mediator to near miss accident at t = 2.14 at p1.96. The results shows that the effects of physical fatigue due to ergonomic risks factors influence the human error as the reasons in express bus accidents.

Ergonomics observation: Harvesting tasks at oil palm plantation.

Science.gov (United States)

Ng, Yee Guan; Shamsul Bahri, Mohd Tamrin; Irwan Syah, Md Yusoff; Mori, Ippei; Hashim, Zailina

2014-01-01

Production agriculture is commonly associated with high prevalence of ergonomic injuries, particularly during intensive manual labor and during harvesting. This paper intends to briefly describe an overview of oil palm plantation management highlighting the ergonomics problem each of the breakdown task analysis. Although cross-sectional field visits were conducted in the current study, insight into past and present occupational safety and health concerns particularly regarding the ergonomics of oil palm plantations was further exploited. Besides discussion, video recordings were extensively used for ergonomics analysis. The unique commodity of oil palm plantations presents significantly different ergonomics risk factors for fresh fruit bunch (FFB) cutters during different stages of harvesting. Although the ergonomics risk factors remain the same for FFB collectors, the intensity of manual lifting increases significantly with the age of the oil palm trees-weight of FFB. There is urgent need to establish surveillance in order to determine the current prevalence of ergonomic injuries. Thereafter, ergonomics interventions that are holistic and comprehensive should be conducted and evaluated for their efficacy using approaches that are integrated, participatory and cost-effective.

Incorporating organisational safety culture within ergonomics practice.

Science.gov (United States)

Bentley, Tim; Tappin, David

2010-10-01

This paper conceptualises organisational safety culture and considers its relevance to ergonomics practice. Issues discussed in the paper include the modest contribution that ergonomists and ergonomics as a discipline have made to this burgeoning field of study and the significance of safety culture to a systems approach. The relevance of safety culture to ergonomics work with regard to the analysis, design, implementation and evaluation process, and implications for participatory ergonomics approaches, are also discussed. A potential user-friendly, qualitative approach to assessing safety culture as part of ergonomics work is presented, based on a recently published conceptual framework that recognises the dynamic and multi-dimensional nature of safety culture. The paper concludes by considering the use of such an approach, where an understanding of different aspects of safety culture within an organisation is seen as important to the success of ergonomics projects. STATEMENT OF RELEVANCE: The relevance of safety culture to ergonomics practice is a key focus of this paper, including its relationship with the systems approach, participatory ergonomics and the ergonomics analysis, design, implementation and evaluation process. An approach to assessing safety culture as part of ergonomics work is presented.

A review and exploration of sociotechnical ergonomics.

Science.gov (United States)

Dirkse van Schalkwyk, Riaan; Steenkamp, Rigard J

2017-09-01

A holistic review of ergonomic history shows that science remains important for general occupational health and safety (OSH), the broad society, culture, politics and the design of everyday things. Science provides an unconventional and multifaceted viewpoint exploring ergonomics from a social, corporate and OSH perspective. Ergonomic solutions from this mindset may redefine the science, and it will change with companies that change within this socially hyper-connected world. Authentic corporate social responsibility will counter 'misleadership' by not approaching ergonomics with an afterthought. The review concludes that ergonomics will be stronger with social respect and ergonomic thinking based on the optimisation of anthropometric data, digital human models, computer-aided tools, self-empowerment, job enrichment, work enlargement, physiology, industrial psychology, cybernetic ergonomics, operations design, ergonomic-friendly process technologies, ergonomic empowerment, behaviour-based safety, outcome-based employee wellness and fatigue risk management solutions, to mention a few.

The impact of ergonomic work environment exposures on the risk of disability pension: Prospective results from DWECS/DREAM.

Science.gov (United States)

Labriola, Merete; Feveile, Helene; Christensen, Karl B; Strøyer, Jesper; Lund, Thomas

2009-11-01

The objectives were to identify the impact of ergonomic work environment exposures on the risk of disability pension. A representative sample of 8475 employees of the total working population in Denmark were interviewed regarding work environment exposures and followed in a national register with data on granted disability pension. For women, approximately 34% of the disability pension cases were attributable to ergonomic work environment exposures. For men, 21% of the disability pension cases were attributable to ergonomic work environment. Ergonomic work environment, especially physically demanding work, working with hands lifted and repetitive work, are areas of intervention at the workplace that can facilitate and prolong labour market participation. The study provides estimates for the association between ergonomic exposures at work and administrative, cost-related measures of work disability in a large population-based longitudinal cohort study over 14 years. Approximately 21% for men and 34% for women of the disability pension cases were attributable to ergonomic work environment exposures.

Effects of ergonomic intervention on work-related upper extremity musculoskeletal disorders among computer workers: a randomized controlled trial.

Science.gov (United States)

Esmaeilzadeh, Sina; Ozcan, Emel; Capan, Nalan

2014-01-01

The aim of the study was to determine effects of ergonomic intervention on work-related upper extremity musculoskeletal disorders (WUEMSDs) among computer workers. Four hundred computer workers answered a questionnaire on work-related upper extremity musculoskeletal symptoms (WUEMSS). Ninety-four subjects with WUEMSS using computers at least 3 h a day participated in a prospective, randomized controlled 6-month intervention. Body posture and workstation layouts were assessed by the Ergonomic Questionnaire. We used the Visual Analogue Scale to assess the intensity of WUEMSS. The Upper Extremity Function Scale was used to evaluate functional limitations at the neck and upper extremities. Health-related quality of life was assessed with the Short Form-36. After baseline assessment, those in the intervention group participated in a multicomponent ergonomic intervention program including a comprehensive ergonomic training consisting of two interactive sessions, an ergonomic training brochure, and workplace visits with workstation adjustments. Follow-up assessment was conducted after 6 months. In the intervention group, body posture (p 0.05). Ergonomic intervention programs may be effective in reducing ergonomic risk factors among computer workers and consequently in the secondary prevention of WUEMSDs.

Occupational ergonomics and injury prevention.

Science.gov (United States)

Stobbe, T J

1996-01-01

Ergonomics is the study of people at work. The current focus is on the prevention of work-induced musculoskeletal injuries through the application of sound ergonomic principles. This chapter has briefly outlined ergonomics and its history, has described low back pain and upper extremity cumulative trauma disorders from an ergonomic perspective, and has discussed control and prevention approaches for a few scenarios. Ergonomic principles are based on a combination of science and engineering and a thorough understanding of human capabilities and limitations. When these principles are applied to the design of a job, task, process, or procedure, the incidence and severity of musculoskeletal injuries decrease. In many cases productivity and morale also improve. Workers are spared suffering, and employers are spared costs. It is hoped that this discussion will encourage more health, safety, and business professionals to learn about and apply ergonomics in their workplaces for the improvement of the worker, product, and business. Finally, many additional epidemiologic studies on the individual and joint effects of the CTD risk factors are needed. The knowledge gained from these studies will promote the more effective application of ergonomic principles to reduce worker suffering, improve products, and reduce costs.

A Review of the Ergonomic Issues in the Laparoscopic Operating Room

Directory of Open Access Journals (Sweden)

Sang D. Choi

2012-01-01

Full Text Available This review paper discusses the ergonomic challenges associated with laparoscopy in the operating room (OR and summarizes the practical ergonomic solutions. The literature search was conducted in the fields of laparoscopy and applied ergonomics. Findings indicated that laparoscopic OR staff (surgeons, perioperative nurses and technicians commonly experienced physical and mental ergonomic risks while working in prolonged static and awkward body positions. This study highlighted the need for more ergonomic interventions in OR environment in order to improve the efficiency of laparoscopy. Ergonomic solutions included utilizing adjustable equipment, placing computer peripherals in optimal locations, providing ergonomic instruments, and improving communication. Understanding the job- or task-related ergonomic risks and hazards could help identify intervention requirements to meet the challenges associated with increased dependency on advanced high technology in the OR.

Comparative assessment of physical and cognitive ergonomics associated with robotic and traditional laparoscopic surgeries.

Science.gov (United States)

Lee, Gyusung I; Lee, Mija R; Clanton, Tameka; Clanton, Tamera; Sutton, Erica; Park, Adrian E; Marohn, Michael R

2014-02-01

We conducted this study to investigate how physical and cognitive ergonomic workloads would differ between robotic and laparoscopic surgeries and whether any ergonomic differences would be related to surgeons' robotic surgery skill level. Our hypothesis is that the unique features in robotic surgery will demonstrate skill-related results both in substantially less physical and cognitive workload and uncompromised task performance. Thirteen MIS surgeons were recruited for this institutional review board-approved study and divided into three groups based on their robotic surgery experiences: laparoscopy experts with no robotic experience, novices with no or little robotic experience, and robotic experts. Each participant performed six surgical training tasks using traditional laparoscopy and robotic surgery. Physical workload was assessed by using surface electromyography from eight muscles (biceps, triceps, deltoid, trapezius, flexor carpi ulnaris, extensor digitorum, thenar compartment, and erector spinae). Mental workload assessment was conducted using the NASA-TLX. The cumulative muscular workload (CMW) from the biceps and the flexor carpi ulnaris with robotic surgery was significantly lower than with laparoscopy (p NASA-TLX analysis showed that both robotic surgery novices and experts expressed lower global workloads with robotic surgery than with laparoscopy, whereas LEs showed higher global workload with robotic surgery (p > 0.05). Robotic surgery experts and novices had significantly higher performance scores with robotic surgery than with laparoscopy (p < 0.05). This study demonstrated that the physical and cognitive ergonomics with robotic surgery were significantly less challenging. Additionally, several ergonomic components were skill-related. Robotic experts could benefit the most from the ergonomic advantages in robotic surgery. These results emphasize the need for well-structured training and well-defined ergonomics guidelines to maximize the

Ergonomics study for workers at food production industry

Directory of Open Access Journals (Sweden)

Mohd Fazi Hamizatun

2017-01-01

Full Text Available The health constraint faced by production workers affects the quality of the work. The productivity of the workers is affected by the Work-related Musculoskeletal Disorder (WMSD which limits the movement of the workers. The comfort workplace condition, known as ergonomic environment is important to prevent the occurrence of the WMSD. Proper ergonomic workplace considers the condition of the workers while doing the assigned work. The objectives of this study are to identify the current problems related to ergonomic in food production process, to analyse the actual production data by using Rapid Upper Limb Assessment (RULA and Rapid Entire Body Assessment (REBA and to recommend the ergonomic workplace environment based on the condition of the study. The study was done at a Small and Medium Enterprises (SME food production company in the Klang Valley of Malaysia. The condition of the workers affects the productivity of the company due to workers’ health deficiency. From the findings, the workers are exposed to the awkward postures which leads to the Work-Musculoskeletal Disorders (WMSDs. Besides, the best height of the worker at the study area (critical area to prevent the worker from WMSDs is within 155 cm to 160 cm. The results show that the workers are exposed to the WMSD in different level of risks which causes high absenteeism among the workers.

High risk process control system assessment methodology

Energy Technology Data Exchange (ETDEWEB)

Santos, Venetia [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil); Zamberlan, Maria Cristina [National Institute of Tehnology (INT), Rio de Janeiro, RJ (Brazil). Human Reliability and Ergonomics Research Group for the Oil, Gas and Energy Sector

2009-07-01

The evolution of ergonomics methodology has become necessary due to the dynamics imposed by the work environment, by the increase of the need of human cooperation and by the high interaction between various sections within a company. In the last 25 years, as of studies made in the high risk process control, we have developed a methodology to evaluate these situations that focus on the assessment of activities and human cooperation, the assessment of context, the assessment of the impact of work of other sectors in the final activity of the operator, as well as the modeling of existing risks. (author)

Initial experience using a robotic-driven laparoscopic needle holder with ergonomic handle: assessment of surgeons' task performance and ergonomics.

Science.gov (United States)

Sánchez-Margallo, Juan A; Sánchez-Margallo, Francisco M

2017-12-01

The objective of this study is to assess the surgeons' performance and ergonomics during the use of a robotic-driven needle holder in laparoscopic suturing tasks. Six right-handed laparoscopic surgeons with different levels of experience took part in this study. Participants performed a set of three different intracorporeal suturing tasks organized in ten trials during a period of five weeks. Surgeons used both conventional (Conv) and robotic (Rob) laparoscopic needle holders. Precision using the surgical needle, quality of the intracorporeal suturing performance, execution time and leakage pressure for the urethrovesical anastomosis, as well as the ergonomics of the surgeon's hand posture, were analyzed during the first, fifth and last trials. No statistically significant differences in precision and quality of suturing performance were obtained between both groups of instruments. Surgeons required more time using the robotic instrument than using the conventional needle holder to perform the urethrovesical anastomosis, but execution time was significantly reduced after training ([Formula: see text] 0.05). There were no differences in leakage pressure for the anastomoses carried out by both instruments. After training, novice surgeons significantly improved the ergonomics of the wrist ([Formula: see text] 0.05) and index finger (Conv: 36.381[Formula: see text], Rob: 30.389[Formula: see text]; p = 0.024) when using the robotic instrument compared to the conventional needle holder. Results have shown that, although both instruments offer similar technical performance, the robotic-driven instrument results in better ergonomics for the surgeon's hand posture compared to the use of a conventional laparoscopic needle holder in intracorporeal suturing.

The effects of an office ergonomics training and chair intervention on worker knowledge, behavior and musculoskeletal risk.

Science.gov (United States)

Robertson, Michelle; Amick, Benjamin C; DeRango, Kelly; Rooney, Ted; Bazzani, Lianna; Harrist, Ron; Moore, Anne

2009-01-01

A large-scale field intervention study was undertaken to examine the effects of office ergonomics training coupled with a highly adjustable chair on office workers' knowledge and musculoskeletal risks. Office workers were assigned to one of three study groups: a group receiving the training and adjustable chair (n=96), a training-only group (n=63), and a control group (n=57). The office ergonomics training program was created using an instructional systems design model. A pre/post-training knowledge test was administered to all those who attended the training. Body postures and workstation set-ups were observed before and after the intervention. Perceived control over the physical work environment was higher for both intervention groups as compared to workers in the control group. A significant increase in overall ergonomic knowledge was observed for the intervention groups. Both intervention groups exhibited higher level behavioral translation and had lower musculoskeletal risk than the control group.

Comparison between low-cost marker-less and high-end marker-based motion capture systems for the computer-aided assessment of working ergonomics.

Science.gov (United States)

Patrizi, Alfredo; Pennestrì, Ettore; Valentini, Pier Paolo

2016-01-01

The paper deals with the comparison between a high-end marker-based acquisition system and a low-cost marker-less methodology for the assessment of the human posture during working tasks. The low-cost methodology is based on the use of a single Microsoft Kinect V1 device. The high-end acquisition system is the BTS SMART that requires the use of reflective markers to be placed on the subject's body. Three practical working activities involving object lifting and displacement have been investigated. The operational risk has been evaluated according to the lifting equation proposed by the American National Institute for Occupational Safety and Health. The results of the study show that the risk multipliers computed from the two acquisition methodologies are very close for all the analysed activities. In agreement to this outcome, the marker-less methodology based on the Microsoft Kinect V1 device seems very promising to promote the dissemination of computer-aided assessment of ergonomics while maintaining good accuracy and affordable costs. PRACTITIONER’S SUMMARY: The study is motivated by the increasing interest for on-site working ergonomics assessment. We compared a low-cost marker-less methodology with a high-end marker-based system. We tested them on three different working tasks, assessing the working risk of lifting loads. The two methodologies showed comparable precision in all the investigations.

Awareness and Knowledge of Ergonomics Among Medical Laboratory Scientists in Nigeria.

Science.gov (United States)

Oladeinde, B H; Ekejindu, I M; Omoregie, R; Aguh, O D

2015-01-01

Ergonomics awareness helps in its right application and contributes significantly to general wellbeing and safety of worker at workplace. This cross-sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, respectively, were recruited for this study using systematic random sampling technique. Data were obtained from the study participants using a questionnaire and subsequently analyzed with the statistical software INSTAT(®). Out of 106 study participants, 27 (25.5%) were reported to have heard of the term ergonomics. Awareness was significantly associated with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% confidence interval = 1.2, 7.1;P = 0.02). Awareness of ergonomics was not significantly affected by affiliation (P = 0.18), area of specialization (P = 0.78), post-qualification experience (P = 0.43), and educational qualification (P = 0.23) of the study participants. Irrespective of the affiliation of the participant, only 6 of 27 (22.2%) participants who were aware of ergonomics knew at least a benefit of right application of ergonomics in the laboratory. Knowledge of risk factors for the development of musculoskeletal disorders was reported by 8 of 27 (29.6%) persons who claimed to be aware of ergonomics. Awareness of ergonomics and knowledge of gains of its right application was poor among the study participants. Regular ergonomic education of medical laboratory scientists in Nigeria is advocated.

Photograph-based ergonomic evaluations using the Rapid Office Strain Assessment (ROSA).

Science.gov (United States)

Liebregts, J; Sonne, M; Potvin, J R

2016-01-01

The Rapid Office Strain Assessment (ROSA) was developed to assess musculoskeletal disorder (MSD) risk factors for computer workstations. This study examined the validity and reliability of remotely conducted, photo-based assessments using ROSA. Twenty-three office workstations were assessed on-site by an ergonomist, and 5 photos were obtained. Photo-based assessments were conducted by three ergonomists. The sensitivity and specificity of the photo-based assessors' ability to correctly classify workstations was 79% and 55%, respectively. The moderate specificity associated with false positive errors committed by the assessors could lead to unnecessary costs to the employer. Error between on-site and photo-based final scores was a considerable ∼2 points on the 10-point ROSA scale (RMSE = 2.3), with a moderate relationship (ρ = 0.33). Interrater reliability ranged from fairly good to excellent (ICC = 0.667-0.856) and was comparable to previous results. Sources of error include the parallax effect, poor estimations of small joint (e.g. hand/wrist) angles, and boundary errors in postural binning. While this method demonstrated potential validity, further improvements should be made with respect to photo-collection and other protocols for remotely-based ROSA assessments. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Cost-effectiveness of ergonomic interventions in production

NARCIS (Netherlands)

Looze, M.P. de; Koningsveld, E.P.A.; Fritzsche, L.; O'Sullivan, L.; Levizzari, A.

2008-01-01

Ergonomic measures to reduce or eliminate the risks for developing musculoskeletal disorders, usually affects the performance at work as well, e.g. productivity or quality. The costs and benefits that can be associated with ergonomic measures are highly diverse in nature. Prior to investing in any

A Scott bench with ergonomic thorax stabilisation pad improves body posture during preacher arm curl exercise.

Science.gov (United States)

Biscarini, Andrea; Benvenuti, Paolo; Busti, Daniele; Zanuso, Silvano

2016-05-01

We assessed whether the use of an ergonomic thorax stabilisation pad, during the preacher arm curl exercise, could significantly reduce the excessive shoulder protraction and thoracic kyphosis induced by the standard flat pad built into the existing preacher arm curl equipment. A 3D motion capture system and inclinometers were used to measure shoulder protraction and thoracic kyphosis in 15 subjects performing preacher arm curl with a plate-loaded machine provided with the standard flat pad. The same measures were repeated after replacing the flat pad with a new ergonomic pad, specifically designed to accommodate the thorax profile and improve body posture. Pad replacement significantly (p ergonomic pad may potentially allow a more effective training, prevent musculoskeletal discomfort and reduce the risk of injury. Practitioner summary: We have designed an ergonomic thorax stabilisation pad for the preacher arm curl exercise. The new ergonomic pad improves the poor posture conditions induced by the standard flat pad and may potentially allow a more effective training, prevent musculoskeletal discomfort, improve the breathing function and reduce the risk of injury.

Assessment of office furniture and knowledge of work ergonomics ...

African Journals Online (AJOL)

Background: Poor posture when maintained for a long period can result in musculoskeletal injuries and deformities. Aims: This study aimed at investigating the knowledge of work ergonomics among bank workers, and the ergonomic compliance of office furniture used in some banks, in Enugu metropolis. Methods: This is a ...

Green ergonomics: combining sustainability and ergonomics.

Science.gov (United States)

Pilczuk, Davana; Barefield, Kevin

2014-01-01

When discussing ergonomics, the term 'sustainability' usually refers to the preservation of the human workforce. However, in 2010 Gulfstream Aerospace Corporation made a conscious effort to combine ergonomics and environmental sustainability in order to increase employee engagement for both programs. They introduced a companywide campaign called Green Ergo which is the idea of creating ergonomic solutions from scrap material found on site. This concept embraced the true meaning of 'green' and encouraged engineers and employees all across the company to design innovative green ergonomic solutions. The idea generated over 35 new ergo solutions, reduced waste production, and solved over 700 ergo problems for a fraction of the cost of newly purchased items. The demand for these items grew large enough that the company outsourced their manufacturing to a local non-profit. The Green Ergo campaign has changed the culture of the company and has increased the level of buy-in for both the ergonomics and sustainability programs.

Awareness and Knowledge of Ergonomics Among Medical Laboratory Scientists in Nigeria

Science.gov (United States)

Oladeinde, BH; Ekejindu, IM; Omoregie, R; Aguh, OD

2015-01-01

Background: Ergonomics awareness helps in its right application and contributes significantly to general wellbeing and safety of worker at workplace. Aim: This cross-sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. Subjects and Methods: A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, respectively, were recruited for this study using systematic random sampling technique. Data were obtained from the study participants using a questionnaire and subsequently analyzed with the statistical software INSTAT®. Results: Out of 106 study participants, 27 (25.5%) were reported to have heard of the term ergonomics. Awareness was significantly associated with gender (male vs. female: 38.5% [15/39] vs. 17.9% [12/67]; odds ratio = 2.9; 95% confidence interval = 1.2, 7.1;P = 0.02). Awareness of ergonomics was not significantly affected by affiliation (P = 0.18), area of specialization (P = 0.78), post-qualification experience (P = 0.43), and educational qualification (P = 0.23) of the study participants. Irrespective of the affiliation of the participant, only 6 of 27 (22.2%) participants who were aware of ergonomics knew at least a benefit of right application of ergonomics in the laboratory. Knowledge of risk factors for the development of musculoskeletal disorders was reported by 8 of 27 (29.6%) persons who claimed to be aware of ergonomics. Conclusions: Awareness of ergonomics and knowledge of gains of its right application was poor among the study participants. Regular ergonomic education of medical laboratory scientists in Nigeria is advocated. PMID:27057381

Removal of simulated biofilm: a preclinical ergonomic comparison of instruments and operators.

Science.gov (United States)

Graetz, Christian; Plaumann, Anna; Rauschenbach, Sebastian; Bielfeldt, Jule; Dörfer, Christof E; Schwendicke, Falk

2016-07-01

Periodontal scaling might cause musculoskeletal disorders, and scaling instruments might not only have different effectiveness and efficiency but also differ in their ergonomic properties. The present study assessed ergonomic working patterns of experienced (EO) and less experienced operators (LO) when using hand and powered devices for periodontal scaling and root planning. In an experimental study using periodontally affected manikins, sonic (AIR), ultrasonic (TIG) and hand instruments (GRA) were used by 11 operators (7 EO/4 LO) during simulated supportive periodontal therapy. Using an electronic motion monitoring system, we objectively assessed the working frequency and positioning of hand, neck and head. Operators' subjective evaluation of the instruments was recorded using a questionnaire. Hand instruments were used with the lowest frequency (2.57 ± 1.08 s(-1)) but greatest wrist deviation (59.57 ± 53.94°). EO used instruments more specifically than LO, and generally worked more ergonomically, with less inclination of head and neck in both the frontal and sagittal planes, especially when using hand instruments. All groups found hand instruments more tiring and difficult to use than powered instruments. Regardless of operators' experience, powered instruments were used more ergonomically and were subjectively preferred compared to hand instruments. The use of hand instruments has potential ergonomic disadvantages. However, with increasing experience, operators are able to recognise and mitigate possible risks.

Using ergonomics checkpoints to support a participatory ergonomics intervention in an industrially developing country (IDC)--a case study.

Science.gov (United States)

Helali, Faramarz

2009-01-01

To achieve ergonomics awareness in 3 subsidiary companies, an intervention team was formed. The aims of this study were to implement basic ergonomics through a participatory ergonomics intervention process that can support a continuous learning process and lead to an improvement in health and safety as well as in the work systems in the organization. The findings of this study (i.e., method, continuous learning and integration) were key to making the participatory ergonomics intervention successful. Furthermore, 4 issues of the ergonomics checkpoints (i.e., work schedules, work tasks, healthy work organization and learning) for assessing the work system were found suitable for both changing work schedules and for improving the work system. This paper describes the result of this project and also the experiences gained and the conclusions reached from using the International Labour Office's ergonomics checkpoints in the industries of industrially developing country.

Applying research to practice: generalist and specialist (visual ergonomics) consultancy.

Science.gov (United States)

Long, Jennifer; Long, Airdrie

2012-01-01

Ergonomics is a holistic discipline encompassing a wide range of special interest groups. The role of an ergonomics consultant is to provide integrated solutions to improve comfort, safety and productivity. In Australia, there are two types of consultants--generalists and specialists. Both have training in ergonomics but specialist knowledge may be the result of previous education or work experience. This paper presents three projects illustrating generalist and specialist (visual ergonomics) consultancy: development of a vision screening protocol, solving visual discomfort in an office environment and solving postural discomfort in heavy industry. These case studies demonstrate how multiple ergonomics consultants may work together to solve ergonomics problems. It also describes some of the challenges for consultants, for those engaging their services and for the ergonomics profession, e.g. recognizing the boundaries of expertise, sharing information with business competitors, the costs-benefits of engaging multiple consultants and the risk of fragmentation of ergonomics knowledge and solutions. Since ergonomics problems are often multifaceted, ergonomics consultants should have a solid grounding in all domains of ergonomics, even if they ultimately only practice in one specialty or domain. This will benefit the profession and ensure that ergonomics remains a holistic discipline.

Cost-Benefit Analysis and Assessment of Ergonomic Interventions Effects: Case Study Boiler and Equipment Engineering and Manufacturing Company

Directory of Open Access Journals (Sweden)

Iraj Mohammad faam

2015-12-01

Full Text Available Background & Objectives: In Economic and competitive world today,cost-benefit analysis is one of the most important parameters for any intervention.The purpose of thisstudy was cost-benefit analysis of ergonomic interventions effects in Boiler and Equipment Engineering and Manufacturing Company. Methods:At first all workstations of the company assessed using QEC. Thenthose earned more than 70% in QEC assessed by OWAS. By analyzing the results of these two methods, the “Haarp welding” workstation selected as the critical one. After presentation of possible solutions in specialized committee, the final solution selected and cost-benefit analysis done by CyberManS tool. Finally after implementing the intervention workstation reassessed. Findings:The results of the survey showed that the final score of assessment using QEC, OWAS and NASA-TLX before the intervention was 84.7%, 3 and 75.4, respectively and after the intervention was 47.5%, 1 and 42.7 that witnesses a significant reduction in all three methods of assessment. Also the result of cost-benefit analysis by CyberManS showed that by spending 110 million rials after 1.5 years the investment returned and profitability initiated. Conclusion:In addition to reducing the risk of musculoskeletal disorders, ergonomic interventions have financial benefits by increasing the productivity and production, reducing the compensation and the lost work days can also cause financial benefits.

A case study detailing key considerations for implementing a telehealth approach to office ergonomics.

Science.gov (United States)

Ritchie, Catherine L W; Miller, Linda L; Antle, David M

2017-01-01

Telehealth approaches to delivering ergonomics assessment hold great potential to improve service delivery in rural and remote settings. This case study describes a telehealth-based ergonomics service delivery process, and compares in-person and telehealth-based ergonomics approaches at an Alberta-based non-profit advocacy group. This project demonstrates that telehealth approaches to ergonomics do not lead to significantly different scoring outcomes for assessment of ergonomics issues, when compared to in-person assessments. This project also outlines the importance of live real-time video conferencing to improving communication, attaining key assessment information, and demonstrating ergonomic adjustments. However, some key considerations of bandwidth and hardware capabilities need to be taken into account. Key communication strategies are outlined to improve rapport, maintain employee confidentiality, and reduce client anxiety around telehealth ergonomics assessments. This project provides further support for telehealth approaches to office ergonomics, and outlines some key implementation strategies and barriers that should be considered.

Ergonomics: case study in a university library

Directory of Open Access Journals (Sweden)

Daniela Capri

2012-08-01

Full Text Available This final paper aimed to analyze the real ergonomics of a university library from Florianópolis and compare it with the ergonomics perceived by the user to perform an ergonomic diagnosis. In order to meet this goal two specific goals were established such as: describe the physical and environmental aspects of the library related to the real ergonomics and verify the actual perception of users about the library. As a theoretical approach, aspects of ergonomics and environmental ergonomics were contextualized and linked to the library and the university library. Referring to the methodology, the Ergonomical Assessment of the Built Environment was used as a reference. The study subjects comprised a sample of 15, among students and library staff. In the results obtained, when related to the physical-environmental analysis of the library, it was found that there are some aspects that differ from the regulatory standards and that also fall short in relation to feedback from users. Aspects such as lighting and noise were cited as unsatisfactory, but the temperature factor was analyzed as satisfactory.

Ergonomics Considerations in Microcomputing.

Science.gov (United States)

Torok, Andrew G.

1984-01-01

Discusses evolution of ergonomics and development of computer ergonomics with its sub-fields of hardware ergonomics (user-equipment-related problems including workstation design); software ergonomics (problems in communication with computers); and peopleware ergonomics (psychological impact). Ergonomic features of VDTs, keyboards, and printers are…

Mass of materials: the impact of designers on construction ergonomics.

Science.gov (United States)

Smallwood, John

2012-01-01

Many construction injuries are musculoskeletal related in the form of sprains and strains arising from the handling of materials, which are specified by designers. The paper presents the results of a study conducted among delegates attending two 'designing for H&S' (DfH&S) seminars using a questionnaire. The salient findings include: the level of knowledge relative to the mass and density of materials is limited; designers generally do not consider the mass and density of materials when designing structures and elements and specifying materials; to a degree designers appreciate that the mass and density of materials impact on construction ergonomics; designers rate their knowledge of the mass and density of materials as limited, and designers appreciate the potential of the consideration of the mass and density of materials to contribute to an improvement in construction ergonomics. Conclusions include: designers lack the requisite knowledge relative to the mass and density of materials; designers are thus precluded from conducting optimum design hazard identification and risk assessments, and tertiary built environment designer education does not enlighten designers relative to construction ergonomics. Recommendations include: tertiary built environment designer education should construction ergonomics; professional associations should raise the level of awareness relative to construction ergonomics, and design practices should include a category 'mass and density of materials' in their practice libraries.

Fisioterapia na avaliação e prevenção de riscos ergonômicos em trabalhadores de um setor financeiro Physical therapy for assessing and preventing ergonomic risks in a financial unit workers

Directory of Open Access Journals (Sweden)

Vanessa Maria de Vargas Ferreira

2009-09-01

ergonomic risks. The analysis was carried out by means of three observational techniques - RULA, rapid upper limb assessment, Couto's checklist, and ergonomic analysis with focus on the activity - and by applying the SF-36 questionnaire to employees. Results showed presence of moderate biomechanical factors and a risk to WRMD unlikely but possible; workplace conditions were found close to ideal. But a more detailed analysis showed working postures within the worst level, requiring immediate changes. At SF-36 scores were high, showing adequate quality of life. Thus, although work environment was found suitable, the misuse of equipment, poor distribution and incorrect way of performing tasks point to ergonomic hazards. In order to minimize risks, preventive measures were proposed, suggesting specific actions in areas that most contribute to ergonomic hazards.

Activities and Ergonomics of Workers in Broiler Hatcheries

Directory of Open Access Journals (Sweden)

CCS Carvalho

2015-06-01

Full Text Available The objective this study was to assess ergonomic factors, posture and biomechanics of workers of a broiler egg hatchery. The analysis of ergonomic factors was based on physical work load, thermal environment, and exposure to light and noise. The posture of workers was analyzed using photographic records which were evaluated by the software program OWAS (Ovako Working Posture Analysing System. A biomechanics analysis was also performed based on the photographs taken of the employee at various angles, which were used as inputs to the Michigan two-dimensional biomechanical model software program. The results show that certain activities can be considered unhealthy due to the exposure of employees to physical and thermal overload. The continuous noise levels and lighting were outside the range considered adequate by the regulations of the Brazilian Ministry of Labor. The manner in which certain activities are carried out when associated with weight and poor posture can result in body lesions in broiler hatchery employees. It is therefore necessary to apply specific ergonomic programs, including scheduled breaks, training, and other measures in order to reduce or to eliminate the risks involved in these activities.

[Evaluation of ergonomic load of clinical nursing procedures].

Science.gov (United States)

Yan, P; Zhang, L; Li, F Y; Yang, Y; Wang, Y N; Huang, A M; Dai, Y L; Yao, H

2017-08-20

Objective: To evaluate the ergonomic load of clinical nursing procedures and to provide evidence for the prevention and management of work-related musculoskeletal disorders (WMSDs) in nurses. Methods: Based on the nursing unit characteristics and the common departments involving patient-turning procedures, 552 nurses were selected from 6 clinical departments from July to September, 2016. The ergonomic load of four types of patient-turning procedures, i.e., turning the patient's body, changing the bed linen of in-bed patients, moving patients, and chest physiotherapy, was evaluated by the on-site inspectors and self-evaluated by the operators using the Quick Exposure Check. The exposure value, exposure level, and exposure rate of WMSDs were assessed based on the procedure-related physical loads on the back, shoulders/arms, wrists/hands and neck, as well as the loads from work rhythm and work pressure. Results: All surveyed subjects were females who were aged mostly between 26-30 years (49.46%) , with a mean age of 29.66±5.28 years. These nurses were mainly from the Department of Infection (28.99%) and Spine Surgery (21.56%) . There were significant differences in the back, shoulders/arms, neck, work rhythm, and work pressure scores between different nursing procedures ( F =16.613, 5.884, 3.431, 3.222, and 5.085, respectively; P nursing procedures resulted in high to intermediate physical load in nurses. Procedures with high to low level of WMSDs exposure were patient turning (72.69%) , bed linen changing (67.15%) , patient transfer (65.82%) , and chest physiotherapy (58.34%) . In particular, patient turning was considered as very high-risk procedure, whereas others were considered as high-risk procedures. Conclusion: Patient-turning nursing procedures result in high ergonomic load in the operators. Therefore, more focus should be placed on the ergonomics of the caretakers and nurses.

Participatory ergonomics among female cashiers from a department store.

Science.gov (United States)

Cristancho, María Yanire León

2012-01-01

The objective of this paper was to control ergonomic risks among female cashiers working in a department store belonging to the retail market. This study was conducted between May and November 2010. Participatory ergonomics was applied through knowing and understanding how the company works, establishing the work team (Ergo group), training the team in ergonomics-related topics, and making decisions and interventions. The sample was composed of 71 participants--mostly female cashiers--, and all of them have a musculoskeletal compromise, declaring pain or discomfort mainly in the neck, lower back, right wrist and shoulders. Among others, following problems were found: postural overload, repetitive work, manual load handling, mental fatigue, environmental discomfort, variable work schedules, extended working days, and absence of breaks. In the intervention, the main implemented changes were the redesign of workstation, complete change of chairs and keyboards, and the implementation of a rotation system, as well breaks for compensatory exercises. After that, an evident improvement of found problems was observed, therefore it can be concluded that participatory ergonomics is an attractive methodology, appropriate and efficient for solving and controlling ergonomic risks and problems.

Participatory ergonomics to reduce exposure to psychosocial and physical risk factors for low back pain and neck pain: results of a cluster randomised controlled trial.

Science.gov (United States)

Driessen, Maurice T; Proper, Karin I; Anema, Johannes R; Knol, Dirk L; Bongers, Paulien M; van der Beek, Allard J

2011-09-01

This study investigated the effectiveness of the Stay@Work participatory ergonomics programme to reduce workers' exposure to psychosocial and physical risk factors. 37 departments (n=3047 workers) from four Dutch companies participated in this cluster randomised controlled trial; 19 (n=1472 workers) were randomised to an intervention group (participatory ergonomics) and 18 (n=1575 workers) to a control group (no participatory ergonomics). During a 6 h meeting guided by an ergonomist, working groups devised ergonomic measures to reduce psychosocial and physical workload and implemented them within 3months in their departments. Data on psychosocial and physical risk factors for low back pain and neck pain were collected at baseline and after 6 months. Psychosocial risk factors were measured using the Job Content Questionnaire and physical risk factors using the Dutch Musculoskeletal Questionnaire. Intervention effects were studied using multilevel analysis. Intervention group workers significantly increased on decision latitude (0.29 points; 95% CI 0.07 to 0.52) and decision authority (0.16 points; 95% CI 0.04 to 0.28) compared to control workers. However, exposure to awkward trunk working postures significantly increased in the intervention group (OR 1.86; 95% CI 1.15 to 3.01) compared to the control group. No significant differences between the intervention and control group were found for the remaining risk factors. After 6months, loss to follow-up was 35% in the intervention group and 29% in the control group. Participatory ergonomics was not effective in reducing exposure to psychosocial and physical risk factors for low back pain and neck pain among a large group of workers. ISRCTN27472278.

[Manual material handling risk assessment and ergonomic improvement in foodstuff retailing company].

Science.gov (United States)

Maso, S; Maccà, I; Simonetti, A; Scopa, P; Paruzzolo, P; Bonacci, A; Murgolo, I; Bartolucci, G B

2011-01-01

The aim of this study is to assess and reduce the risk due to manual material handling in a company involved in the foodstuff retailing. The risk assessment was performed by NIOSH Variable Lifing Index in 13 different occupational conditions. As result the risk was present in any case, with VLI values ranging from 2.12 to 2.81. A good risk reduction has been accomplished correcting properly the most important multiplier involved in the computation of the revised NIOSH Lifting equation (lifting frequency and weight of heavier products). Even if the performed risk reduction has been significant, the residual risk is still higher than the level of acceptability.

Analysis of comfort and ergonomics for clinical work environments.

Science.gov (United States)

Shafti, Ali; Lazpita, Beatriz Urbistondo; Elhage, Oussama; Wurdemann, Helge A; Althoefer, Kaspar

2016-08-01

Work related musculoskeletal disorders (WMSD) are a serious risk to workers' health in any work environment, and especially in clinical work places. These disorders are typically the result of prolonged exposure to non-ergonomic postures and the resulting discomfort in the workplace. Thus a continuous assessment of comfort and ergonomics is necessary. There are different techniques available to make such assessments, such as self-reports on perceived discomfort and observational scoring models based on the posture's relevant joint angles. These methods are popular in medical and industrial environments alike. However, there are uncertainties with regards to objectivity of these methods and whether they provide a full picture. This paper reports on a study about these methods and how they correlate with the activity of muscles involved in the task at hand. A wearable 4-channel electromyography (EMG) and joint angle estimation device with wireless transmission was made specifically for this study to allow continuous, long-term and real-time measurements and recording of activities. N=10 participants took part in an experiment involving a buzz-wire test at 3 different levels, with their muscle activity (EMG), joint angle scores (Rapid Upper Limb Assessment - RULA), self-reports of perceived discomfort (Borg scale) and performance score on the buzz-wire being recorded and compared. Results show that the Borg scale is not responsive to smaller changes in discomfort whereas RULA and EMG can be used to detect more detailed changes in discomfort, effort and ergonomics.

Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI in Virtual Environment

Directory of Open Access Journals (Sweden)

Erlinda Muslim

2011-09-01

Full Text Available This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics  study  using Posture Evaluation Index (PEI. PEI integrates  the scores of  low back analysis (LBA, ovako working  posture  (OWAS,  and  rapid  upper  limb assessment  (RULA.  Analysis  phase  was  done  using  digital  human model  in  virtual  environment  that  available  on  Jack  6.0.  The  results show  that  the  working  conditions  in  garment industry had enough amount of risk that can injured the musculoskeletal system of the workers. This research enriches the  body  of  ergonomics  knowledge  in Indonesia  because  it  is  the  first  research  in  Indonesia that  applied  virtual environment approach to ergonomics analysis in industry.

Ergonomic applications to dental practice

Directory of Open Access Journals (Sweden)

Shipra Gupta

2011-01-01

Full Text Available The term "work-related musculoskeletal disorders (WMSDs," refers to musculoskeletal disorders to which the work environment contributes significantly, or to musculoskeletal disorders that are made worse or longer lasting by work conditions or workplace risk factors. In recent years, there has been an increase in reporting WMSDs for dental persons. Risk factors of WMSDs with specific reference to dentistry include - stress, poor flexibility, improper positioning, infrequent breaks, repetitive movements, weak postural muscles, prolonged awkward postures and improper adjustment of equipment. Ergonomics is the science of designing jobs, equipment and workplaces to fit workers. Proper ergonomic design is necessary to prevent repetitive strain injuries, which can develop over time and can lead to long-term disability. In this article, 20 strategies to prevent WMSDs in the dental operatory are discussed.

Hands-on lessons in ergonomics for youth

Energy Technology Data Exchange (ETDEWEB)

Bennett, C; Alexandre, M; Jacobs, K

2005-09-29

Ergonomics risk factors apply to everybody. Numerous adults have experienced disabling injuries related to use of computers and other forms of technology. Now children are using technology even more than adults. Increasingly ergonomics risk factors are being recognized as present in the world of children. Outreach to schools and the surrounding community by employers may help protect the future work force. A growing body of researchers believe that children can benefit from the early introduction of ergonomics awareness and preventative measures. While individual representatives of the educational system may embrace the concept of introducing ergonomics into the classroom, a number of barriers can prevent implementation of integrated programs. Some of the barriers to introducing ergonomics in schools have been absence of a tie to educational standards, the existing demands on teaching hours, and the absence of easily executable lesson plans. Ergonomics is rarely included in teacher training and professional ergonomics expertise is needed for the development of a class-based program. As part of Strategic Vision plan for 2025, a National Laboratory identified community outreach and the future workforces as key areas for initiatives. A series of hands-on interactive modules have been developed by professional ergonomics specialists. They are being tested with elementary, middle and high school students. Where possible, the content has been tied to the educational standards in the State of California in the USA. Currently the modules include grip strength, effective breathing, optimal keyboard and mouse positions, optimizing chairs, posture and movement, backpack safety and safe lifting. Each module takes the students through a related activity or experience. An individual worksheet asks them questions about the experience and guides them to consider implications in their activities of daily living. A module on hearing is under development. The goal is to have a

Review of the application of ergonomics design of trackless mining equipment (TME) - lessons and challenges

CSIR Research Space (South Africa)

James, JP

2007-06-01

Full Text Available the design of trackless mining equipment (TME) is poor, with improvised seating, poor cabin layouts and sub-standard display instrumentation. This paper will present the key findings of two studies assessing ergonomics risk factors associated with automated...

Conceptual design of semi-automatic wheelbarrow to overcome ergonomics problems among palm oil plantation workers

Science.gov (United States)

Nawik, N. S. M.; Deros, B. M.; Rahman, M. N. A.; Sukadarin, E. H.; Nordin, N.; Tamrin, S. B. M.; Bakar, S. A.; Norzan, M. L.

2015-12-01

An ergonomics problem is one of the main issues faced by palm oil plantation workers especially during harvesting and collecting of fresh fruit bunches (FFB). Intensive manual handling and labor activities involved have been associated with high prevalence of musculoskeletal disorders (MSDs) among palm oil plantation workers. New and safe technology on machines and equipment in palm oil plantation are very important in order to help workers reduce risks and injuries while working. The aim of this research is to improve the design of a wheelbarrow, which is suitable for workers and a small size oil palm plantation. The wheelbarrow design was drawn using CATIA ergonomic features. The characteristic of ergonomics assessment is performed by comparing the existing design of wheelbarrow. Conceptual design was developed based on the problems that have been reported by workers. From the analysis of the problem, finally have resulting concept design the ergonomic quality of semi-automatic wheelbarrow with safe and suitable used for palm oil plantation workers.

Finding ergonomic solutions--participatory approaches.

Science.gov (United States)

Hignett, Sue; Wilson, John R; Morris, Wendy

2005-05-01

This paper gives an overview of the theory of participatory ergonomics interventions and summary examples from a range of industries, including health care, military, manufacturing, production and processing, services, construction and transport. The definition of participatory approaches includes interventions at macro (organizational, systems) levels as well as micro (individual), where workers are given the opportunity and power to use their knowledge to address ergonomic problems relating to their own working activities. Examples are given where a cost-effective benefit has been measured using musculoskeletal sickness absence and compensation costs. Other examples, using different outcome measures, also showed improvements, for example, an increase in productivity, improved communication between staff and management, reduction in risk factors, the development of new processes and new designs for work environments and activities. Three cases are described from Canada and Japan where the participatory project was led by occupational health teams, suggesting that occupational health practitioners can have an important role to play in participatory ergonomics projects.

Ergonomic deficits in robotic gynecologic oncology surgery: a need for intervention.

Science.gov (United States)

Craven, Renatta; Franasiak, Jason; Mosaly, Prithima; Gehrig, Paola A

2013-01-01

To evaluate surgeon strain using validated ergonomic assessment tools. Observational study (Canadian Task Force classification III). Academic medical center. Robotic surgeons performing gynecologic oncology surgical procedures. Videotape footage of surgeons performing robotic gynecologic oncology procedures was obtained. A human factors engineer experienced with health care ergonomics analyzed the video recordings and performed ergonomic evaluations of the surgeons. An initial evaluation was conducted using the Rapid Upper Limb Assessment (RULA) survey, an ergonomic assessment and prioritization method for determining posture, force, and frequency concerns with focus on the upper limbs. A more detailed analysis followed using the Strain Index (SI) method, which uses multiplicative interactions to identify jobs that are potentially hazardous. Seventeen hours of video recordings were analyzed, and descriptive data based on RULA/SI analysis were collected. Ergonomic evaluation of surgeon activity resulted in a mean RULA score of 6.46 (maximum possible RULA score, 7), indicating a need for further investigation. The mean SI grand score was 24.34. SI scores >10 suggest a potential for hazard to the operator. Thus, the current use of the surgical robot is potentially dangerous with regards to ergonomic positioning and should be modified. At a high-volume robotics center, there are ergonomics deficits that are hazardous to gynecologic surgeons and suggest the need for modification and intervention. A training strategy must be developed to address these ergonomic issues and knowledge deficiencies. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

Surgical ergonomics. Analysis of technical skills, simulation models and assessment methods.

Science.gov (United States)

Papaspyros, Sotiris C; Kar, Ashok; O'Regan, David

2015-06-01

Over the past two centuries the surgical profession has undergone a profound evolution in terms of efficiency and outcomes. Societal concerns in relation to quality assurance, patient safety and cost reduction have highlighted the issue of training expert surgeons. The core elements of a training model build on the basic foundations of gross and fine motor skills. In this paper we provide an analysis of the ergonomic principles involved and propose relevant training techniques. We have endeavored to provide both the trainer and trainee perspectives. This paper is structured into four sections: 1) Pre-operative preparation issues, 2) technical skills and instrument handling, 3) low fidelity simulation models and 4) discussion of current concepts in crew resource management, deliberate practice and assessment. Rehearsal, warm-up and motivation-enhancing techniques aid concentration and focus. Appropriate posture, comprehension of ergonomic principles in relation to surgical instruments and utilisation of the non-dominant hand are essential skills to master. Low fidelity models can be used to achieve significant progress through the early stages of the learning curve. Deliberate practice and innate ability are complementary to each other and may be considered useful adjuncts to surgical skills development. Safe medical care requires that complex patient interventions be performed by highly skilled operators supported by reliable teams. Surgical ergonomics lie at the heart of any training model that aims to produce professionals able to function as leaders of a patient safety oriented culture. Copyright © 2015 IJS Publishing Group Limited. Published by Elsevier Ltd. All rights reserved.

Ergonomic analysis of construction worker's body postures using wearable mobile sensors.

Science.gov (United States)

Nath, Nipun D; Akhavian, Reza; Behzadan, Amir H

2017-07-01

Construction jobs are more labor-intensive compared to other industries. As such, construction workers are often required to exceed their natural physical capability to cope with the increasing complexity and challenges in this industry. Over long periods of time, this sustained physical labor causes bodily injuries to the workers which in turn, conveys huge losses to the industry in terms of money, time, and productivity. Various safety and health organizations have established rules and regulations that limit the amount and intensity of workers' physical movements to mitigate work-related bodily injuries. A precursor to enforcing and implementing such regulations and improving the ergonomics conditions on the jobsite is to identify physical risks associated with a particular task. Manually assessing a field activity to identify the ergonomic risks is not trivial and often requires extra effort which may render it to be challenging if not impossible. In this paper, a low-cost ubiquitous approach is presented and validated which deploys built-in smartphone sensors to unobtrusively monitor workers' bodily postures and autonomously identify potential work-related ergonomic risks. Results indicates that measurements of trunk and shoulder flexions of a worker by smartphone sensory data are very close to corresponding measurements by observation. The proposed method is applicable for workers in various occupations who are exposed to WMSDs due to awkward postures. Examples include, but are not limited to industry laborers, carpenters, welders, farmers, health assistants, teachers, and office workers. Copyright © 2017 Elsevier Ltd. All rights reserved.

Effectiveness of Ergonomic Chair against Musculoskeletal Disorders in Female Batik Workers of Sragen District

Directory of Open Access Journals (Sweden)

Sumardiyono Sumardiyono

2014-08-01

Full Text Available The majority of female batik workers uses non-ergonomic chairs (dingklik that pose risks of musculoskeletal disorders. This study aimed to design an ergonomic chair and evaluate its effectiveness in reducing musculoskeletal disorders among the workers. This is a quasi-experimental study (using one group pre and post-test design on 50 female batik workers selected by quota sampling. Musculoskeletal disorders were measured among the samples before and after the use of the designed ergonomic chair which they were asked to use for two months. T-test, ANCOVA, Wilcoxon test, McNemar test and Chi Square test were used for the analysis. The study found statistical significant differences of risk factor against musculoskeletal disorders among the workers before and after their use of the designed ergonomic chair (p=0.000; and of musculoskeletal disorders before and after using the ergonomic chair (p= 0,035. Body Mass Index (BMI was identified as a confounding factor, and statistical significant difference of musculoskeletal disorders were also found among the workers with 25 BMI even before and after using the ergonomic chair (p=0.033 and p=0.015 respectively. By ANCOVA statistical test, after controlling BMI, another statistical difference of musculoskeletal disorders was also identified before and after using the ergonomic chair (p=0.033. It is concluded that the designed ergonomic chair is effective to reduce the risk of musculoskeletal disorders.

Ergonomics research methods

Science.gov (United States)

Uspenskiy, S. I.; Yermakova, S. V.; Chaynova, L. D.; Mitkin, A. A.; Gushcheva, T. M.; Strelkov, Y. K.; Tsvetkova, N. F.

1973-01-01

Various factors used in ergonomic research are given. They are: (1) anthrometric measurement, (2) polyeffector method of assessing the functional state of man, (3) galvanic skin reaction, (4) pneumography, (5) electromyography, (6) electrooculography, and (7) tachestoscopy. A brief summary is given of each factor and includes instrumentation and results.

Ergonomic interventions for improving working postures associated with manual materials handling (case study: a mineral processing plant

Directory of Open Access Journals (Sweden)

Fateme Dehghani

2016-12-01

Full Text Available Introduction: A high percentage of musculoskeletal disorders in workplaces occur due to awkward posture and non-ergonomic design of the work stations for lifting and carrying of materials. To avoid these injuries, jobs should be designed in a way that ergonomics risk factors are controlled properly. The aim of this study was to utilize ergonomics interventions to minimize ergonomics risk factors in bag packing unit in a mineral processing plant. Material and Method: This cross sectional study was carried out among 20 workers of bag packing unit. Camera recording of working postures, evaluation of medical records, interview, and REBA technique were used to identify the ergonomic risk factors. Interventions included changing the conveyor belt height and the use of spring pallets (spring table. Data were analyzed using Paired T-Test by SPSS software version 18. Result: Before implementing ergonomics intervention, a total of 75% of evaluated postures by REBA technique obtained score of 8-10 (very high risk level and 25% had score of 11-15 (very high risk level that correspond to the action level 3 and 4, respectively. Following the implementation of ergonomics interventions, a total of 90% of the analyzed postures showed action level 2 (moderate risk level and the remainder 10 percent of evaluated postures showed high risk level. Comparison of REBA technique scores before and after implementing interventions showed a significant difference (P-value < 0.05. Conclusion: Based on the findings of this study, the implementation of ergonomics interventions has remarkably decreased the required action level and it may be able to improve work-related postures.

Determinants of business sustainability: an ergonomics perspective.

Science.gov (United States)

Genaidy, Ash M; Sequeira, Reynold; Rinder, Magda M; A-Rehim, Amal D

2009-03-01

There is a need to integrate both macro- and micro-ergonomic approaches for the effective implementation of interventions designed to improve the root causes of problems such as work safety, quality and productivity in the enterprise system. The objective of this study was to explore from an ergonomics perspective the concept of business sustainability through optimising the worker-work environment interface. The specific aims were: (a) to assess the working conditions of a production department work process with the goal to jointly optimise work safety, quality and quantity; (b) to evaluate the enterprise-wide work process at the system level as a social entity in an attempt to trace the root causes of ergonomic issues impacting employees throughout the work process. The Work Compatibility Model was deployed to examine the experiences of workers (that is, effort, perceived risk/benefit, performance and satisfaction/dissatisfaction or psychological impact) and their associations with the complex domains of the work environment (task content, physical and non-physical work environment and conditions for learning/growth/development). This was followed by assessment of the enterprise system through detailed interviews with department managers and lead workers. A system diagnostic instrument was also constructed from information derived from the published literature to evaluate the enterprise system performance. The investigation of the production department indicated that the stress and musculoskeletal pain experienced by workers (particularly on the day shift) were derived from sources elsewhere in the work process. The enterprise system evaluation and detailed interviews allowed the research team to chart the feed-forward and feedback stress propagation loops in the work system. System improvement strategies were extracted on the basis of tacit/explicit knowledge obtained from department managers and lead workers. In certain situations concerning workplace human

Processes, barriers and facilitators to implementation of a participatory ergonomics program among eldercare workers

DEFF Research Database (Denmark)

Rasmussen, Charlotte Diana Nørregaard; Lindberg, Naja Klærke; Ravn, Marie Højbjerg

2017-01-01

This study aimed to investigate the processes of a participatory ergonomics program among 594 eldercare workers with emphasis on identified risk factors for low back pain and solutions, and reveal barriers and facilitators for implementation. Sixty-nine per cent of the identified risk factors wer......, workplaces, health and safety professionals, and researchers to improve future participatory ergonomics programs....... physical ergonomic, 24% were organisational and 7% were psychosocial risk factors. Most solutions were organisational (55%), followed by physical (43%) and psychosocial solutions (2%). Internal factors (e.g. team or management) constituted 47% of the barriers and 75% of the facilitators. External factors...

Web sites for ergonomics support

OpenAIRE

Fafejta, Martin

2012-01-01

The subject of this bachelor thesis is survey of computer classrooms from the ergonomic point of view and show ergonomic rules to internet community in accessible form. Theoretic knowledge was gain from literature connected with ergonomic and work hygiene. Main relevance was given to use of computer and ergonomic of computer classroom. Several schools was evaluates in practical part with focus on ergonomic suitability. The conclusions of this thesis are websites contains ergonomics rules and ...

Introduction to ergonomics for healthcare workers.

Science.gov (United States)

Waters, Thomas R

2010-01-01

Healthcare workers who handle and move patients as part of their jobs suffer a disproportionately high number of work-related musculoskeletal disorders (MSDs). The majority of reported work-related MSDs are back pain cases that result in significant numbers of lost work days. It is likely that these lost workdays have a substantial impact on the quality and cost of health care. Patient care ergonomics can reduce the risk of work-related MSDs by helping safety experts design the work so it can be safely performed by most workers. This article provides a general overview of ergonomics--what it is, how it can be used to help design safe work, and why all healthcare workers and administrators should know and understand how excessive work demands can lead to increased risk of work-related MSDs. The article will also explain technological solutions that can be implemented to reduce the risk of work-related MSDs for healthcare workers.

Ergonomics intervention in manual handling of oxygen

Directory of Open Access Journals (Sweden)

M Motamedzadeh

2013-05-01

Conclusion: With the implementation of ergonomic intervention is casting unit, the risk of exposure to musculoskeletal disorders caused by manual handling of oxygen cylinders was eliminated and safety of employees against the risk of explosion of the cylinders in comparison with before the intervention was improved.

Ergonomics policy in Indonesia.

Science.gov (United States)

Sutarjo, Untung S

2007-12-01

Workers' conditions in accordance with their place of work are different from one area to another, especially in this reformation era where there are immense alterations in politics shown from the centralized government shifting to decentralization and district autonomy. Ergonomics problems in Indonesia are reviewed. In home industries, workers have to adjust themselves to their jobs, and ergonomic improvement may face significant impediments especially in small-scale industries. It is necessary to create or identify the most plausible model to be implemented in accordance with the conditions of districts, including low awareness about the relation between ergonomics and workers' productivity in producing goods and services and working processes scattered often at their own houses. As conditions conducive to ergonomics programs, district-level willingness to improve and increase the wealth of their society, recognition by businesses about the impacts of ergonomics on productivity and reduction of medical treatment costs may be mentioned. Labor unions support ergonomic improvements at production processes, and professionals and academicians are ready to assist, whereas national banks and foreign investment may encourage new technologies including ergonomics aspects. It is important to strengthen ergonomic improvement efforts in Indonesia through establishing district ergonomics improvement networks and ergonomics peer leaders with the support of continual training starting from the training of core leaders at the province level and extending to peer leaders at district level. This training should be made as simple as possible in order to facilitate innovations toward changes. Finally assistance is needed by the mentor teams in order to periodically monitor the improvements undertaken.

Ergonomic Product Design 21

International Nuclear Information System (INIS)

Kwon, Yeong Guk

1996-09-01

This book explains basic of ergonomic product design with human engineering, image engineering and strategy of that design, ergonomic industrial design, which includes product design to access the human engineering in development of new product and customer satisfaction, application technology of image engineering, industrial design of human engineering item and strategy of human engineering, a good ergonomic design. It also tells of examples of convenient design for human such as hardware product and software product in automobile, telephones for ergonomic product in the future, new goods and new technology, ergonomic product in house and office, and computers and robots in the future.

Environmental risk assessment for start-up of a new consolidated maintenance facility

Energy Technology Data Exchange (ETDEWEB)

Heubach, J.G.; Wise, J.A.

1992-10-01

This paper summarizes a case study of a risk assessment for a consolidated maintenance facility (CMF). An interdisciplinary team was formed to identify and evaluate showstopper'' risks which could delay or prevent ontime, safe, and economical operation of a CMF and to recommend ways to mitigate the risks. The risk assessment was constrained by time, information, incomplete plans and facilities, and a concomitant major transition in manufacturing process, organization, and technology. Working within these constraints, the team integrated convergent findings into estimates of high, medium, and low risks based on the subjective likelihood of occurrence and predicted consequences of potential hazard events. The team also made risk-reduction recommendations for facility detail design and production start-up. The findings and recommendations reported in this study focus on risks related to environmental design and workstation ergonomics. Findings from the risk assessment effort should aid other constrained risk assessments and applied research on similar facilities.

Evolutionary adaptations: theoretical and practical implications for visual ergonomics.

Science.gov (United States)

Fostervold, Knut Inge; Watten, Reidulf G; Volden, Frode

2014-01-01

The literature discussing visual ergonomics often mention that human vision is adapted to light emitted by the sun. However, theoretical and practical implications of this viewpoint is seldom discussed or taken into account. The paper discusses some of the main theoretical implications of an evolutionary approach to visual ergonomics. Based on interactional theory and ideas from ecological psychology an evolutionary stress model is proposed as a theoretical framework for future research in ergonomics and human factors. The model stresses the importance of developing work environments that fits with our evolutionary adaptations. In accordance with evolutionary psychology, the environment of evolutionary adaptedness (EEA) and evolutionarily-novel environments (EN) are used as key concepts. Using work with visual display units (VDU) as an example, the paper discusses how this knowledge can be utilized in an ergonomic analysis of risk factors in the work environment. The paper emphasises the importance of incorporating evolutionary theory in the field of ergonomics. Further, the paper encourages scientific practices that further our understanding of any phenomena beyond the borders of traditional proximal explanations.

Ergonomics in an oral pathology laboratory: Back to basics in microscopy.

Science.gov (United States)

Sundaragiri, Krishna Sireesha; Shrivastava, Shikha; Sankhla, Bharat; Bhargava, Akshay

2014-09-01

Ergonomics is simply a science focused on "study of work" to reduce fatigue and discomfort through product design. A comprehensive ergonomics program for the pathology laboratory has become necessary to prevent the occurrence of work related musculoskeletal disorders (MSDs) and accidents. Most of the literature on ergonomics involve various web links or occasional studies on the effect of laboratory work and associated MSDs. A Google search was carried out corresponding to the terms "ergonomics", "pathology laboratory", "microscope". All the relevant literature from web sources was sorted out and categorized. In this review, we intend to identify basic anthropometric factors, biomechanical risk factors, laboratory design considerations and specific microscopy-related considerations. The ultimate aim of ergonomics is to provide a safe environment for laboratory personnel to conduct their work and to allow maximum flexibility for safe research use.

'The perfect is the enemy of the good' - ergonomics research and practice. Institute of Ergonomics and Human Factors Annual Lecture 2010.

Science.gov (United States)

Buckle, Peter

2011-01-01

The relationship between research and practice in ergonomics and human factors has rarely been addressed in the literature. This presents specific problems for researchers when seeking to relate their work to the research community. Equally, practitioners are often frustrated by the lack of appropriate research to meet their needs. This paper seeks to identify current drivers for ergonomics research along with an analysis of how these are changing. Specifically, the use of bibliometric data to assess research output and its impact on a multi-disciplinary subject such as ergonomics is examined. Areas where action may be required to stimulate better research and improved practice are proposed. These include a greater role for the practitioner in completing the circle of knowledge and improving the evidence base for practice with, in particular, practitioners becoming more active in determining research priorities. It is concluded that combined effort is needed by researcher and practitioner communities to enable and promote a more effective understanding of the true impact of ergonomics across industry and society. STATEMENT OF RELEVANCE: The relationship between ergonomics research and practice is examined. Research 'drivers' are identified, including the influence of bibliometric data. Implications for researchers and practitioners are discussed. The role of practitioners in completing the circle of knowledge and improving the ergonomics evidence base is stressed, as is the need to promote the impact of ergonomics across society.

Design Processes and Constructive Ergonomics

DEFF Research Database (Denmark)

Broberg, Ole

2015-01-01

This paper discusses some central issues in the concept of constructive ergonomics. It does so by reflecting on experiences from ergonomics intervention projects carried out in Denmark. Constructive ergonomics has a huge potential as a new way to go for ergonomics research and practice. However, ...

Green ergonomics: definition and scope.

Science.gov (United States)

Thatcher, Andrew

2013-01-01

This paper demonstrates that the goals of ergonomics (i.e. effectiveness, efficiency, health, safety and usability) are closely aligned with the goals of design for environmental sustainability. In this paper, the term 'green ergonomics' is conceptualised to specifically describe ergonomics interventions with a pro-nature emphasis. Green ergonomics is focused on the bi-directional connections between human systems and nature. This involves looking at (1) how ergonomics design and evaluation might be used to conserve, preserve, and restore nature and (2) how ecosystem services might be harnessed to facilitate the improved wellbeing and effectiveness of human systems. The paper proposes the scope of green ergonomics based on these bi-directional relationships in the areas of the design of low resource systems and products, the design of green jobs, and the design for behaviour change. Suggestions for further work in the green ergonomics domain are also made. Given the enormous environmental challenges facing modern industrial society, this paper encourages ergonomics science to embrace a pro-nature understanding of work design and research. This paper sets out the role for green ergonomics based on an appreciation of the human-nature connections that have been integrated with our understanding of ergonomics science and practice.

Meeting diversity in ergonomics

NARCIS (Netherlands)

Pikaar, R.N.; Koningsveld, E.A.P.; Settels, P.J.M.

2007-01-01

Key Features: Offers the conceptual tools for creating more adaptable ergonomic designs to meet the needs of diverse human populations, Unlock the strategic business value found in ergonomically safe and comfortable products, Learn from in-depth case studies how ergonomic intervention was

Design Processes and Constructive Ergonomics

OpenAIRE

Broberg, Ole

2015-01-01

This paper discusses some central issues in the concept of constructive ergonomics. It does so by reflecting on experiences from ergonomics intervention projects carried out in Denmark. Constructive ergonomics has a huge potential as a new way to go for ergonomics research and practice. However, many challenges are to be overcome. They relate among others to education and training of ergonomist, and the cultural and institutional setting of ergonomics in specific countries.

Ergonomic considerations in school environments - the need for widening the scope.

Science.gov (United States)

Jayaratne, Kapila

2012-01-01

Behaviour patterns specific to children pose them at greater risk of environmental hazards than adults. Ergonomics is the science of matching human interaction with the proximate environment. Conventionally ergonomic principles were applied on adult work places to ensure safety of the working environment. With emerging scientific evidence, school environments are being a focus to apply ergonomic principles. Children spend more time within schools during critical developmental stages of their life. Everybody feels that the schools are safe places, but they are not. A multitude of ergonomic hazards have been identified in school settings. Widespread mismatches between anthropometry and school furniture, heavy schoolbag carriage and unhealthy bag behaviour are significant. Negative effects range from general tiredness, musculoskeletal pains, spinal deviations, shoulder level shifts, injuries and psychological disturbances. There are fragmented efforts to widen ergonomic concepts to health care professionals and other stakeholders of child health. Addressing ergonomic issues will ensure that children, the future productive generation contributing to economic growth and development of a country, are provided with opportunities in a healthy environment. This paper emphasizes the need for a concerted effort on widening the scope of ergonomics to cater for the evolving demand.

An ergonomic intervention to reduce musculoskeletal discomfort among semiconductor assembly workers.

Science.gov (United States)

Aghilinejad, Mashallah; Azar, Neda Soleimanvandy; Ghasemi, Mohammad Sadegh; Dehghan, Naser; Mokamelkhah, Elahe Kabir

2016-06-14

Work-related musculoskeletal disorders (MSDs) and ergonomics-related injuries are the single largest category of workplace injuries and are responsible for almost 30% of all worker's compensation costs. Awkward working posture refers to positions of the body that deviate significantly from the neutral position while job tasks are being performed and it is the primary ergonomic risk factor for developing musculoskeletal discomfort. This study was conducted among assembly workers of a semiconductor in Tehran province with the objective of implementing an interventional ergonomic program to minimize musculoskeletal discomfort. This study that was conducted on 105 male assembly workers of a semiconductor industry based on a census method. The standardized Nordic Musculoskeletal Questionnaire (NMQ) was used to determine the prevalence of MSDs. Corlett and Bishop's body part discomfort scale (BPD) was applied to evaluate body discomfort before and after the intervention (using a magnifying loupes to improve visibility of the parts). The results of NMQ showed the highest rate of MSDs were in neck, shoulder, upper arm and lower back regions (more than 75%). After ergonomic intervention, significant decrements of discomfort was observed in neck, shoulder, upper arm, elbows, lower arm, lower back and whole body discomfort (p ergonomic interventions can decrease MSDs of at risk body regions in the long term.

Implementation of ergonomics in a service unit: challenges and advances.

Science.gov (United States)

Penteado, Eliane Villas Bôas de Freitas; de França, Maria Goretti; Ramalhoto, Ana Maria de Brito; de Oliveira, Ana Maria; Machado, Bruno Rangel Cortoppassi; Genipapeiro, Joana Angélica Matos

2012-01-01

This article discusses the implementation of ergonomics in a service unit of a major company in the energy sector. From the perspective of management, it analyses the process of implementation of ergonomics programmes in four operational areas. The objective was to diagnose the level of implementation of ergonomics. The study is descriptive, undertaken through the interaction with the technical staff of the operational areas involved, incorporating the perception of these role players concerning their work routines. The results indicated significant differences in the level of implementation of the programmes, especially those concerning structural conditions. Important conquests were registered, such as the investment in the training of specialists, the establishment of a facilitator network and the improvement of the standard for the directioning and alignment of the execution of initiatives. The linking in of the programmes with those of occupational health management emphasises its contribution to the safety and well-being of the workforce through interventions aimed mainly at eliminating and reducing ergonomic biomechanical risks. However, the need to broaden and deepen the ergonomic approach regarding organizational and cognitive aspects, as well as the insertion of ergonomics in project design of new work spaces and processes were also identified.

Ergonomic Risk Factors and Their Association With Lower Back and Neck Pain Among Pharmaceutical Employees in Iran.

Science.gov (United States)

Labbafinejad, Yasser; Imanizade, Zahra; Danesh, Hossein

2016-12-01

The aim of this cross-sectional study was to explore the ergonomic risk factors for low back pain (LBP) and neck pain in an industry in which only light tasks are performed. These common disorders can be significant work-related musculoskeletal disorders. This study included 396 employees who worked in packaging units of pharmaceutical companies. The Nordic Musculoskeletal Questionnaire and the rapid upper limb assessment (RULA) were used to generate data. This study showed an association between LBP, RULA scores, and workers' education. For neck pain, an association was found with age, gender, and subjective questions about working posture (mostly sitting/standing or alternating between the two). Absence from work more than 3 days, which could have been associated with pain, was significantly associated with both disorders. © 2016 The Author(s).

Processes, barriers and facilitators to implementation of a participatory ergonomics program among eldercare workers.

Science.gov (United States)

Rasmussen, Charlotte Diana Nørregaard; Lindberg, Naja Klærke; Ravn, Marie Højbjerg; Jørgensen, Marie Birk; Søgaard, Karen; Holtermann, Andreas

2017-01-01

This study aimed to investigate the processes of a participatory ergonomics program among 594 eldercare workers with emphasis on identified risk factors for low back pain and solutions, and reveal barriers and facilitators for implementation. Sixty-nine per cent of the identified risk factors were physical ergonomic, 24% were organisational and 7% were psychosocial risk factors. Most solutions were organisational (55%), followed by physical (43%) and psychosocial solutions (2%). Internal factors (e.g. team or management) constituted 47% of the barriers and 75% of the facilitators. External factors (e.g. time, financial resources, collaboration with resident or relatives) constituted 53% of the barriers and 25% of the facilitators. This study revealed the processes and implementation of a participatory ergonomics program among eldercare workers. The findings can be transferred to workers, workplaces, health and safety professionals, and researchers to improve future participatory ergonomics programs. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Ergonomic activity analysis of the musicians of the Symphony Orchestra of Paraná state: risk factors and workloads

Directory of Open Access Journals (Sweden)

Jaqueline de Lima

2014-04-01

Full Text Available This study aimed to investigate the risk factors present in the work activity and their impact on the health of the musicians of the Symphony Orchestra of Parana state. It is a descriptive qualitative research based on the method of Ergonomic Workplace Analysis of Francophone strand, used as a tool by occupational therapists in the health-work interface. The following procedures were performed: bibliographical survey, documental analysis of productivity data, production and quality of the task, systematic observation of the rehearsals of the Symphony Orchestra of Parana, task and workplace analysis with the application of Ergonomic Workplace Analysis (EWA and, confrontation of the data analyzed with an instrumental musician. As a result, the study showed significant deviations with reference to the standards described in Brazilian Norm 17 (Ergonomics, especially regarding individual cognitive and physical demands as well as demands related to work organization, considering each item evaluated by this analytical instrument. The action of occupational therapy was grounded on the insertion in the health and illness process, health promotion, illness prevention, and training of musicians as workers and social actors, envisioning the transformation of work situations.

The use of macro-ergonomic work system designs to reduce musculoskeletal disorders and injury risk in training

Directory of Open Access Journals (Sweden)

Purnomo, H.

2017-05-01

Full Text Available Training based on competency is a government effort to improve employee candidates’ job competence. The T echnical Implementation Unit of the Technopark Ganesha Sukowati Sragen is a training centre in the Sragen Regency. Ergonomic issues have still not received attention in some training programmes. The work system design is constructed to support the achievement of the agency’s vision and mission, using the macro-ergonomic analysis and design approach (MEAD. Research results show that the key variance is the installation of embroidery hoops, which is difficult and time-consuming. Integration of the work system with ergonomic designs is necessary to create a pleasant training environment and to improve job competence. The new designs include adjustable seats, embroidery hoops tables with a foot rest, improved lighting, facemasks, earplugs, and a drinking water facility. The workshop layout is designed to follow the work process. The trainees also participated in stretching exercises before training began. A t-test was conducted with the same research design and the same subject, and the results showed a reduction of up to 60.39 per cent in musculoskeletal disorders and a reduction of up to 22.2 per cent in the risk of injury.

ERGONOMICS INVESTIGATION OF MUSCULOSKELETAL DISORDER AMONG THE WORKFORCE OF WASTE MANAGEMENT INDUSTRY IN NIGERIA

Directory of Open Access Journals (Sweden)

Adekunle I. MUSA

2017-12-01

Full Text Available The objective of this study is to undertake an Ergonomic Scrutiny of Desecrate Management Industry. Ten (10 employees of the parking and collection department of Kim Waste Management Authority (KWMA were selected. Their activities were video and recorded while working and their different postures were analyzed using Rapid Entire Body Assessment (REBA and Rapid Upper Limb Assessment (RULA. Result showed that 10% were at medium risk; 40% were at high risk and 50% were at very high risk for the workers in KWMA. It as discovered that workers are subjected to Musculoskeletal Disorder (MSDs as a result of the postures adopted during the work process.

The stage of change approach for implementing ergonomics advice - Translating research into practice.

Science.gov (United States)

Rothmore, Paul; Aylward, Paul; Oakman, Jodi; Tappin, David; Gray, Jodi; Karnon, Jonathan

2017-03-01

The Stage of Change (SOC) approach has been proposed as a method to improve the implementation of ergonomics advice. However, despite evidence for its efficacy there is little evidence to suggest it has been adopted by ergonomics consultants. This paper investigates barriers and facilitators to the implementation, monitoring and effectiveness of ergonomics advice and the adoption of the SOC approach in a series of focus groups and a subsequent survey of members of the Human Factors Societies of Australia and New Zealand. A proposed SOC assessment tool developed for use by ergonomics practitioners is presented. Findings from this study suggest the limited application of a SOC based approach to work-related musculoskeletal injury prevention by ergonomics practitioners is due to the absence of a suitable tool in the ergonomists' repertoire, the need for training in this approach, and their limited access to relevant research findings. The final translation of the SOC assessment tool into professional ergonomics practice will require accessible demonstration of its real-world usability to practitioners and the training of ergonomics practitioners in its application. Copyright © 2016 Elsevier Ltd. All rights reserved.

Assessment of interns and postgraduate dental student's knowledge regarding equipment ergonomics.

Science.gov (United States)

Rajeswari, S Raja; Gowda, Triveni M; Kumar, Tarun Ab; Arya, Kanchan; Mehta, Dhoom Singh

2016-01-01

The substantial knowledge concerning ergonomics and its practical application is vital for forestalling musculoskeletal disorders. The role of equipment ergonomics (EE) in preventing these work-related ailments is significantly noteworthy. The aim of the study was to assess the prevailing perception of postgraduates (PGs) and interns regarding EE and preparing the Indian dental workforce for the challenges of India's growing economy and population. Authors conducted a cross-sectional survey between December 2013 and February 2014 amidst the interns and PG dental students of Davangere city, Karnataka, India. The data were collected using 21-item custom designed proforma, comprising of questions evaluating student's basic knowledge about EE. Statistical analysis was done using Chi-square test in each group (PGs and interns) and Mann-Whitney test was implemented for comparison between both groups. Of 358 subjects surveyed, 48% PGs and 52% interns affirmed that they came across EE only through this survey. In addition, 91.18% of PGs and 90.59% interns believed that the accentuation on EE is less in the current dental curriculum. Comprehensive understanding and practical application of EE among the participants was found to be lacking. The importance of microbreaks and chair side exercises should be emphasized and training should be initiated at an early stage before improper postural habits develop.

Ergonomics standards and guidelines for computer workstation design and the impact on users' health - a review.

Science.gov (United States)

Woo, E H C; White, P; Lai, C W K

2016-03-01

This paper presents an overview of global ergonomics standards and guidelines for design of computer workstations, with particular focus on their inconsistency and associated health risk impact. Overall, considerable disagreements were found in the design specifications of computer workstations globally, particularly in relation to the results from previous ergonomics research and the outcomes from current ergonomics standards and guidelines. To cope with the rapid advancement in computer technology, this article provides justifications and suggestions for modifications in the current ergonomics standards and guidelines for the design of computer workstations. Practitioner Summary: A research gap exists in ergonomics standards and guidelines for computer workstations. We explore the validity and generalisability of ergonomics recommendations by comparing previous ergonomics research through to recommendations and outcomes from current ergonomics standards and guidelines.

Effects of training intervention on non-ergonomic positions among video display terminals (VDT) users.

Science.gov (United States)

Mirmohammadi, Seyed Jalil; Mehrparvar, Amir Houshang; Olia, Mohammad Bagher; Mirmohammadi, Monirolsadat

2012-01-01

Substantial evidence shows an association between musculoskeletal disorders (MSDs) and certain work-related physical factors. One of the jobs with known ergonomic hazards is working with video display terminals (VDTs). Redesign, ergonomic improvements, and education have generally been recommended as solutions for the prevention of musculoskeletal disorders. We designed this study to assess the effects of ergonomic training on the working postures of VDT users. In an intervention study, we assessed the impact of ergonomic training on the ergonomic hazards and work postures in employees working with VDTs. Participants and their workstations were assessed by Rapid Upper Limb Assessment (RULA) method before and after training. 70 employees of an office, working with a VDT more than four hours per day entered the study. The greatest compliance with OSHA workstation recommendations was seen with the monitor (21.4% of cases) and the least compliance with the one was the chair (10.0%). Mean RULA score before and after intervention were 5.90, and 5.07, respectively, and the difference was statistically significant (p training office ergonomics to the VDT users, even without changing work place components can significantly improve VDT users' behavior and ability to properly fit a workstation to him/herself.

Validation of ergonomic instructions in robot-assisted surgery simulator training.

Science.gov (United States)

Van't Hullenaar, C D P; Mertens, A C; Ruurda, J P; Broeders, I A M J

2018-05-01

Training in robot-assisted surgery focusses mainly on technical skills and instrument use. Training in optimal ergonomics during robotic surgery is often lacking, while improved ergonomics can be one of the key advantages of robot-assisted surgery. Therefore, the aim of this study was to assess whether a brief explanation on ergonomics of the console can improve body posture and performance. A comparative study was performed with 26 surgical interns and residents using the da Vinci skills simulator (Intuitive Surgical, Sunnyvale, CA). The intervention group received a compact instruction on ergonomic settings and coaching on clutch usage, while the control group received standard instructions for usage of the system. Participants performed two sets of five exercises. Analysis was performed on ergonomic score (RULA) and performance scores provided by the simulator. Mental and physical load scores (NASA-TLX and LED score) were also registered. The intervention group performed better in the clutch-oriented exercises, displaying less unnecessary movement and smaller deviation from the neutral position of the hands. The intervention group also scored significantly better on the RULA ergonomic score in both the exercises. No differences in overall performance scores and subjective scores were detected. The benefits of a brief instruction on ergonomics for novices are clear in this study. A single session of coaching and instruction leads to better ergonomic scores. The control group showed often inadequate ergonomic scores. No significant differences were found regarding physical discomfort, mental task load and overall performance scores.

Safety voice for ergonomics (SAVE project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices

Directory of Open Access Journals (Sweden)

Laurel D. Kincl

2016-04-01

Full Text Available Abstract Background Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack “soft skills” training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program – SAfety Voice for Ergonomics – strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Methods/design Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group: (1 ergonomics training only, (2 safety voice training only, (3 combined ergonomics and safety voice training, or (4 control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include

Safety voice for ergonomics (SAVE) project: protocol for a workplace cluster-randomized controlled trial to reduce musculoskeletal disorders in masonry apprentices.

Science.gov (United States)

Kincl, Laurel D; Anton, Dan; Hess, Jennifer A; Weeks, Douglas L

2016-04-27

Masons have the highest rate of overexertion injuries among all construction trades and rank second for occupational back injuries in the United States. Identified ergonomic solutions are the primary method of reducing exposure to risk factors associated with musculoskeletal disorders. However, many construction workers lack knowledge about these solutions, as well as basic ergonomic principles. Construction apprentices, as they embark on their careers, are greatly in need of ergonomics training to minimize the cumulative exposure that leads to musculoskeletal disorders. Apprentices receive safety training; however, ergonomics training is often limited or non-existent. In addition, apprenticeship programs often lack "soft skills" training on how to appropriately respond to work environments and practices that are unsafe. The SAVE program - SAfety Voice for Ergonomics - strives to integrate evidence-based health and safety training strategies into masonry apprenticeship skills training to teach ergonomics, problem solving, and speaking up to communicate solutions that reduce musculoskeletal injury risk. The central hypothesis is that the combination of ergonomics training and safety voice promotion will be more effective than no training or either ergonomics training alone or safety voice training alone. Following the development and pilot testing of the SAVE intervention, SAVE will be evaluated in a cluster-randomized controlled trial at 12 masonry training centers across the U.S. Clusters of apprentices within centers will be assigned at random to one of four intervention groups (n = 24 per group): (1) ergonomics training only, (2) safety voice training only, (3) combined ergonomics and safety voice training, or (4) control group with no additional training intervention. Outcomes assessed at baseline, at the conclusion of training, and then at six and 12 months post training will include: musculoskeletal symptoms, general health perceptions, knowledge of

The Influence of Ergonomics Training on Employee Behavior at Los Alamos National Laboratory

Energy Technology Data Exchange (ETDEWEB)

Puckett, Leslie Guthrie [Colorado State Univ., Fort Collins, CO (United States)

2001-01-01

A survey of employee behavior was conducted at Los Alamos National Laboratory (LANL). The objective of this study was to evaluate the prevalence of ergonomic behavior that decreased the chance of having a work-related musculoskeletal disorder (WMSD) among employees. The null hypothesis was tested to determine if there was a significant difference in ergonomic behavior between trained and untrained employees. The LANL employees were stratified by job series and then randomly selected to participate. The data were gathered using an electronic self-administered behavior questionnaire. The study population was composed of 6931 employees, and the response rate was 48%. The null hypothesis was rejected for twelve out of fifteen questions on the questionnaire. Logistic regression results indicate that the trained participants were more likely to report the risk-avoiding behavior, which supported the rejection of the null hypothesis for 60% of the questions. There was a higher frequency that the beneficial or risk-avoiding behavior was reported by the uninjured participants. Job series analysis revealed that ergonomics is an important issue among participants from all the job series. It also identified the occupational specialist classification (an administrative job), as the job series with the most occurrences of undesired ergonomic behaviors. In conclusion, there was a significant difference between the trained and untrained participants of the beneficial ergonomic behavior in the reported risk reducing behaviors.

Musculoskeletal Injuries and Their Associated Risk Factors

Directory of Open Access Journals (Sweden)

M Jahangiri

2012-01-01

Full Text Available Background and aims :Prevalence of musculoskeletal disorders (MSDs is high among office workers. Long time seated posture, working with computer, repetitive movements and inappropriate environmental conditions may have causal effects in these disorders. High prevalence rate of MSDs makes ergonomics assessment and working conditions improvement necessary. Designing an assessment checklist and calculating ergonomics indices can be useful in this evaluation. This study was conducted with the objectives of determination of prevalence rate, ergonomics assessment of working conditions and determination of factors associated with MSDs among office workers. Methods:In this study 400 randomly selected office workers participated. Nordic musculoskeletal disorders questionnaire was applied to determine prevalence rate of MSDs. Working conditions were assessed by the designed ergonomics checklist and ergonomic risk factors were identified. Data were analyzed using statistical tests including t-test, Chi-square and test of proportion by SPSS software (Version 12.0. Results:The highest prevalence rates of MSDs were reported in lower back and neck regions (49% and 47%, respectively. Statistical analysis revealed that there were significant association between occurrence of MSDs and calculated ergonomics indices (P<0.05. The mean of ergonomics index among those suffered from MSDs were less than other healthy workers indicating inappropriate ergonomics conditions. Calculation of OR also revealed that ergonomics conditions was associated with MSDs occurrence among workers (P<0.05. Totally, 53.3% of the office workers studied had poor working conditions. Awkward working posture and inappropriate workstation design were recognized as the main risk factors in the office workplace.  Conclusion:Most ergonomics problems were originated from bad postures and inappropriate design of workstation. Any interventional program for working conditions improvement should

Sound in Ergonomics

Directory of Open Access Journals (Sweden)

Jebreil Seraji

1999-03-01

Full Text Available The word of “Ergonomics “is composed of two separate parts: “Ergo” and” Nomos” and means the Human Factors Engineering. Indeed, Ergonomics (or human factors is the scientific discipline concerned with the understanding of interactions among humans and other elements of a system, and the profession that applies theory, principles, data and methods to design in order to optimize human well-being and overall system performance. It has applied different sciences such as Anatomy and physiology, anthropometry, engineering, psychology, biophysics and biochemistry from different ergonomics purposes. Sound when is referred as noise pollution can affect such balance in human life. The industrial noise caused by factories, traffic jam, media, and modern human activity can affect the health of the society.Here we are aimed at discussing sound from an ergonomic point of view.

Building a framework for ergonomic research on laparoscopic instrument handles.

Science.gov (United States)

Li, Zheng; Wang, Guohui; Tan, Juan; Sun, Xulong; Lin, Hao; Zhu, Shaihong

2016-06-01

Laparoscopic surgery carries the advantage of minimal invasiveness, but ergonomic design of the instruments used has progressed slowly. Previous studies have demonstrated that the handle of laparoscopic instruments is vital for both surgical performance and surgeon's health. This review provides an overview of the sub-discipline of handle ergonomics, including an evaluation framework, objective and subjective assessment systems, data collection and statistical analyses. Furthermore, a framework for ergonomic research on laparoscopic instrument handles is proposed to standardize work on instrument design. Copyright © 2016 IJS Publishing Group Ltd. Published by Elsevier Ltd. All rights reserved.

Impact of task design on task performance and injury risk: case study of a simulated drilling task.

Science.gov (United States)

Alabdulkarim, Saad; Nussbaum, Maury A; Rashedi, Ehsan; Kim, Sunwook; Agnew, Michael; Gardner, Richard

2017-06-01

Existing evidence is limited regarding the influence of task design on performance and ergonomic risk, or the association between these two outcomes. In a controlled experiment, we constructed a mock fuselage to simulate a drilling task common in aircraft manufacturing, and examined the effect of three levels of workstation adjustability on performance as measured by productivity (e.g. fuselage completion time) and quality (e.g. fuselage defective holes), and ergonomic risk as quantified using two common methods (rapid upper limb assessment and the strain index). The primary finding was that both productivity and quality significantly improved with increased adjustability, yet this occurred only when that adjustability succeeded in reducing ergonomic risk. Supporting the inverse association between ergonomic risk and performance, the condition with highest adjustability created the lowest ergonomic risk and the best performance while there was not a substantial difference in ergonomic risk between the other two conditions, in which performance was also comparable. Practitioner Summary: Findings of this study supported a causal relationship between task design and both ergonomic risk and performance, and that ergonomic risk and performance are inversely associated. While future work is needed under more realistic conditions and a broader population, these results may be useful for task (re)design and to help cost-justify some ergonomic interventions.

Ergonomics work assessment in rural industrial settings: a student occupational therapy project.

Science.gov (United States)

Bowman, Peter J

2012-01-01

This case study describes a student occupational therapy (OT) program, the creation of a worksite assessment project as a part of a Community Connections: Partners for Learning and Service grant funded by Health Resources and Services Administration. The primary goals were to design occupation-based community learning experiences in a variety of rural community settings, so that students might benefit from participating in the community based learning and: based on the results, embed occupation-based learning into existing occupational therapy curriculum. The components of the project and the ergonomics content of the OT education program are described; details of the work assessment are presented with analysis of data from the student evaluation of this project.

Processes, barriers and facilitators to implementation of a participatory ergonomics program among eldercare workers

DEFF Research Database (Denmark)

Rasmussen, Charlotte Diana Nørregaard; Lindberg, Naja Klærke; Ravn, Marie Højbjerg

2017-01-01

This study aimed to investigate the processes of a participatory ergonomics program among 594 eldercare workers with emphasis on identified risk factors for low back pain and solutions, and reveal barriers and facilitators for implementation. Sixty-nine per cent of the identified risk factors were...... (e.g. time, financial resources, collaboration with resident or relatives) constituted 53% of the barriers and 25% of the facilitators. This study revealed the processes and implementation of a participatory ergonomics program among eldercare workers. The findings can be transferred to workers...... physical ergonomic, 24% were organisational and 7% were psychosocial risk factors. Most solutions were organisational (55%), followed by physical (43%) and psychosocial solutions (2%). Internal factors (e.g. team or management) constituted 47% of the barriers and 75% of the facilitators. External factors...

A trend analysis of ergonomic research themes in Taiwan.

Science.gov (United States)

Lin, Chih-Long

2015-01-01

This paper examines the development of ergonomics in Taiwan by analysing 1404 scientific articles published by 113 permanent members of the Ergonomics Society of Taiwan (EST). Each article was classified by key words and abstract content. Each article was also coded by period of publication (1971-1992 (first period), 1993-1997 (second period), 1998-2002 (third period), 2003-2007 (fourth period), and 2008-2012 (fifth period), and against 13 topic categories. The results show that rate of publication has increased by approximately 100 articles every five years since 1993.The most popular topic was ergonomics assessment and analysis techniques in the first period, force exertion-related research in the second period, product design and evaluation in the third period, occupational safety and health in the fourth period and human-computer interface in the fifth period. Each of these is highly relevant to current contemporary issues around the world. Finally, potential areas for future ergonomics research in Taiwan are discussed. This study investigates the trends in academic papers published by members of the EST. Over time, topics have shifted from ergonomics evaluation methods to occupational safety and health, and human–computer interaction. The findings should be considered as important references for planning the future of ergonomics in Taiwan.

Ergonomic Interventions in Manual Handling of Carpets to the retail sellers in a textile company

Directory of Open Access Journals (Sweden)

E. Darvishi

2015-04-01

.Conclusion: By implementing ergonomics interventions in carpet delivery sites, the risk factors of MSDs, induced by manual carpet handling, were reduced and safety and ergonomic conditions of the retailers were improved, compared to the previous conditions.

Health Care Ergonomics: Contributions of Thomas Waters.

Science.gov (United States)

Poole Wilson, Tiffany; Davis, Kermit G

2016-08-01

The aim of this study was to assess the contributions of Thomas Waters's work in the field of health care ergonomics and beyond. Waters's research of safe patient handling with a focus on reducing musculoskeletal disorders (MSDs) in health care workers contributed to current studies and prevention strategies. He worked with several groups to share his research and assist in developing safe patient handling guidelines and curriculum for nursing students and health care workers. The citations of articles that were published by Waters in health care ergonomics were evaluated for quality and themes of conclusions. Quality was assessed using the Mixed Methods Appraisal Tool and centrality to original research rating. Themes were documented by the type of population the citing articles were investigating. In total, 266 articles that referenced the top seven cited articles were evaluated. More than 95% of them were rated either medium or high quality. The important themes of these citing articles were as follows: (a) Safe patient handling is effective in reducing MSDs in health care workers. (b) Shift work has negative impact on nurses. (c) There is no safe way to manually lift a patient. (d) Nurse curriculums should contain safe patient handling. The research of Waters has contributed significantly to the health care ergonomics and beyond. His work, in combination with other pioneers in the field, has generated multiple initiatives, such as a standard safe patient-handling curriculum and safe patient-handling programs. © 2016, Human Factors and Ergonomics Society.

Ergonomic relationship during work in nursing staff of intensive care unit with operating room

Directory of Open Access Journals (Sweden)

Yousef Mahmoudifar

2017-01-01

Full Text Available Background and Objectives: High prevalence of work-related musculoskeletal disorders, especially in jobs such as nursing which covers tasks like patients' repositioning, has attracted great attentions from occupational healthcare experts to necessitate the knowledge of ergonomic science. Therefore, this study was performed aiming at ergonomic relationship during work in nursing staff of Intensive Care Unit (ICU with operating room. Materials and Methods: In this descriptive-analytical study (cohort, fifty personnel of ICU staff and fifty of operating room staff were selected through a census method and were assessed using tools such as Nordic questionnaire and Rapid Entire Body Assessment (REBA standards in terms of body posture ergonomics. The obtained data were analyzed by SPSS software and Chi-Square test after collection. Results: The most complaints were from the operating room group (68% and ICU staff (60% for the lumbar musculoskeletal system. There was a significant relationship between the total REBA scores of body, legs, neck, arm, force status, load fitting with hands and static or dynamic activities in the operating room and ICU staff groups (P < 0.05. In operating room and ICU groups, most subjects obtained score 11–15 and very high-risk level. Conclusion: Nurses working at operating room and ICU ward are subjected to high-risk levels and occupational injuries which is dramatically resulted from inappropriate body posture or particular conditions of their works. As a result, taking corrective actions along with planning and identifying ways will help prohibiting the prevalence of disorders in the future.

Methodology for risk assessment and reliability applied for pipeline engineering design and industrial valves operation

Energy Technology Data Exchange (ETDEWEB)

Silveira, Dierci [Universidade Federal Fluminense (UFF), Volta Redonda, RJ (Brazil). Escola de Engenharia Industrial e Metalurgia. Lab. de Sistemas de Producao e Petroleo e Gas], e-mail: dsilveira@metal.eeimvr.uff.br; Batista, Fabiano [CICERO, Rio das Ostras, RJ (Brazil)

2009-07-01

Two kinds of situations may be distinguished for estimating the operating reliability when maneuvering industrial valves and the probability of undesired events in pipelines and industrial plants: situations in which the risk is identified in repetitive cycles of operations and situations in which there is a permanent hazard due to project configurations introduced by decisions during the engineering design definition stage. The estimation of reliability based on the influence of design options requires the choice of a numerical index, which may include a composite of human operating parameters based on biomechanics and ergonomics data. We first consider the design conditions under which the plant or pipeline operator reliability concepts can be applied when operating industrial valves, and then describe in details the ergonomics and biomechanics risks that would lend itself to engineering design database development and human reliability modeling and assessment. This engineering design database development and reliability modeling is based on a group of engineering design and biomechanics parameters likely to lead to over-exertion forces and working postures, which are themselves associated with the functioning of a particular plant or pipeline. This approach to construct based on ergonomics and biomechanics for a more common industrial valve positioning in the plant layout is proposed through the development of a methodology to assess physical efforts and operator reach, combining various elementary operations situations. These procedures can be combined with the genetic algorithm modeling and four elements of the man-machine systems: the individual, the task, the machinery and the environment. The proposed methodology should be viewed not as competing to traditional reliability and risk assessment bur rather as complementary, since it provides parameters related to physical efforts values for valves operation and workspace design and usability. (author)

Ergonomic lumbar risk analysis of construction workers by NIOSH method

Directory of Open Access Journals (Sweden)

Cinara Caetano Pereira

2015-09-01

Full Text Available Work in construction has tasks directly connected with manual transport. One of the body segments suffering greater demand in works with these characteristics is the lumbar spine segment. The aim of this study was to analyze the level of risk of lumbar construction workers in the shipment of materials. The sample was composed of 74 construction workers. Were used as a research tool: the NIOSH method for lumbar risk verification expressed by weight limit recommended (WPR and the lifting Index (IL, Visual analogue scale (VAS for the evaluation of pain intensity, the e-1 Corlett.0 for the mapping of the pain and Borg to the subjective perception of the intensity of physical exertion. The present study identified the weight limit (WP of 8.707 for management activity of bags of cement for the load of 8.194 wheelbarrows used. These findings are 6 times under actual weights handled during the activities that revolve around 50 kg with the sacks and averaged 49.72 kg stands with mass. The dimensional settings found in the search are at high risk for ergonomic lumbar region, and measures of reconfiguration of workplaces and operation of auxiliary devices for lifting, transporting and unloading are fundamental, in addition to the need for reflection about the current logistical problems that induce producers to supply the cement sacks with 50 kg.

The conceptual framework for physical risk assessment in multi-purpose workplaces

Directory of Open Access Journals (Sweden)

Lasota Andrzej Marek

2017-01-01

Full Text Available In industry work related musculoskeletal disorders (WRMSDs are still a common problem which frequent cause of health problems, sick leave and it can result in decreased productivity, quality of work and increased absenteeism. Though, traditional manufacturing work practices do not enough take into account task variability issues during the work design – assessment process. Variations in task content and organizational work performance are due to effective use of equipments and reaching high level of productivity. But this variation has impact on work demand and risk to WRMSDs and makes some difficulties with assessment of risk. Therefore, this study aims develop a framework for assessment multi-purpose workplaces. The proposed method integrates complementary concepts of widely known techniques used for evaluation of physical risk factors to WRMSDs on workplaces. Additionally the research framework is highlighting major differences in worker’s exposure to WRMSDs risk, potential impact on awkward postures, and how these findings can be used for finding solutions in a future ergonomic intervention.

Evaluation of the musculoskeletal disorders by ART technique and implementation of ergonomics intervention programs in a manufacturing company

Directory of Open Access Journals (Sweden)

javad torkaman

2015-06-01

Full Text Available Background & Objectives : Currently, work-related musculoskeletal disorders are a major occupational health concern. This study tried to evaluate the risk factors of musculoskeletal disorders by the assessment of repetitive tasks (ART. It also sought to determine the effects of an ergonomic intervention on the mentioned risk in a manufacturing company . Methods: In this study, 60 production line workers were randomly selected. The data was collected by using a demographic questionnaire and the ART. The intervention was implemented for 39 cases. Data were analyzed in SPSS. Results: The initial evaluations suggested low, moderate, and high levels of risk in 21.7, 48.3, and 30.0 of the participants, respectively. Re-assessments after the intervention showed that the frequency of low-risk individuals increased from 30.70 before the intervention to 53.85 after the intervention. On the other hand, comparisons between the rates before and after the intervention revealed reductions in the frequency of moderate risk (64.10 vs. 43.59 and high risk (5.2 vs. 2.56. These changes were all significant. Conclusion: In most cases, the initial ergonomic risks were not at an acceptable level. In fact, most workers were at moderate level of risk. Since many workers in the assembling industry suffer from musculoskeletal disorders, low-cost eengineering and management measures can be taken to reduce the level of risk .

A model for assessing the degree of importance of ergonomics criteria to human machine interface

Energy Technology Data Exchange (ETDEWEB)

Araujo, Cesar Ribeiro de; Domech More, Jesus [Universidade Estacio de Sa do Rio de Janeiro, RJ (Brazil). Mestrado em Desenvolvimento Empresarial - MADE]. E-mail: cesararaujobr@yahoo.com.br; jesus.more@estacio.br; Silva, Aretha Felix Thomaz da [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Civil. Sistemas Computacionais Orientados a Industria do Petroleo]. E-mail: aretha@coc.ufrj.br

2007-07-01

This paper intends to show a model to help us to incorporate ergonomics criteria into the usability of the human computer interface (HCI). The techniques based on fuzzy set theory are appropriate tools for the treatment of subjective and vague concepts that are inherent to usability for the HCI. The application consists of analysis concepts. This approach allows the use of natural language expressions of importance in ergonomics criteria estimation. The above-mentioned model shows the degree of importance of the ergonomics criteria present in the software interface used in the medical area. In this work, as entry data, the system developer opinions are used and as a result we had the hierarchy of 18 ergonomic criteria. The ergonomic criteria are those already validated by the market, which are linked to the ErgoList checklists. The fuzzy model created will allow knowing the most important criteria to health governmental companies. Its Information Technology (IT) professionals will concentrate efforts when treating the usability of the software interface and its systems. (author)

A model for assessing the degree of importance of ergonomics criteria to human machine interface

International Nuclear Information System (INIS)

Araujo, Cesar Ribeiro de; Domech More, Jesus; Silva, Aretha Felix Thomaz da

2007-01-01

This paper intends to show a model to help us to incorporate ergonomics criteria into the usability of the human computer interface (HCI). The techniques based on fuzzy set theory are appropriate tools for the treatment of subjective and vague concepts that are inherent to usability for the HCI. The application consists of analysis concepts. This approach allows the use of natural language expressions of importance in ergonomics criteria estimation. The above-mentioned model shows the degree of importance of the ergonomics criteria present in the software interface used in the medical area. In this work, as entry data, the system developer opinions are used and as a result we had the hierarchy of 18 ergonomic criteria. The ergonomic criteria are those already validated by the market, which are linked to the ErgoList checklists. The fuzzy model created will allow knowing the most important criteria to health governmental companies. Its Information Technology (IT) professionals will concentrate efforts when treating the usability of the software interface and its systems. (author)

ERGONOMICS safety course

CERN Multimedia

SC Unit

2008-01-01

Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! •\tErgonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 •\tErgonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will receive an invitation via e-mail once your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

ERGONOMICS safety course

CERN Multimedia

SC Unit

2008-01-01

Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! Ergonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 Ergonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will receive and invitation via e-mail once your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

ERGONOMICS safety course

CERN Multimedia

SC Unit

2008-01-01

Two sessions of the ERGONOMICS safety course will be held on November 27, 2008, in French and in English. PLEASE SIGN-UP! Ergonomie - Sensibilisation à l’ergonomie bureautique (Nov 27, 08:30-12:30, in French) https://edh.cern.ch/Document/TRN/new?course=077M00 Ergonomics - Applying ergonomic principles in the workplace (Nov 27, 13:30-17:30, in English) https://edh.cern.ch/Document/TRN/new?course=077M10 You will be invited by email after your EDH request is completed and fully signed. For further information, please contact Isabelle CUSATO (73811).

Ergonomics of mining machinery and transport in the South African mining industry.

CSIR Research Space (South Africa)

Schutte, PC

2003-03-01

Full Text Available this background, a study was conducted to assess the ergonomics of a number of mining machines and transport systems to identify the ergonomics-related hazards that could impact on the operators’ ability to work safely and efficiently....

Ergonomic analysis of radiopharmaceuticals samples preparation process

International Nuclear Information System (INIS)

Gomes, Luciene Betzler C.; Santos, Isaac Luquetti dos; Fonseca, Antonio Carlos C. da; Pellini, Marcos Pinto; Rebelo, Ana Maria

2005-01-01

The doses of radioisotopes to be administrated in patients for diagnostic effect or therapy are prepared in the radiopharmacological sector. The preparation process adopts techniques that are aimed to reduce the exposition time of the professionals and the absorption of excessive doses for patients. The ergonomic analysis of this process contributes in the prevention of occupational illnesses and to prevent risks of accidents during the routines, providing welfare and security to the involved users and conferring to the process an adequate working standard. In this context it is perceived relevance of studies that deal with the analysis of factors that point with respect to the solution of problems and for establishing proposals that minimize risks in the exercise of the activities. Through a methodology that considers the application of the concepts of Ergonomics, it is searched the improvement of the effectiveness or the quality and reduction of the difficulties lived for the workers. The work prescribed, established through norms and procedures codified will be faced with the work effectively carried through, the real work, shaped to break the correct appreciation, with focus in the activities. This work has as objective to argue an ergonomic analysis of samples preparation process of radioisotopes in the Setor de Radiofarmacia do Hospital Universitario Clementino Fraga Filho da Universidade Federal do Rio de Janeiro (UFRJ). (author)

Assessment of relationship between Macro Ergonomic conditions and employees work satisfaction Touse-eh and Omran factory

Directory of Open Access Journals (Sweden)

M. Rismanchian

2008-04-01

Full Text Available Background and aims   Background and aim: Macro ergonomics is a social - technical attitude which in the manner of top down proceeds to look at organization planning , work- system and also planning of human - machine , human -environmental , human- job interaction and emphasizes on employees participation and make plenty use of it.   Methods   This descriptive - analytical study is of cross - sectional type. Data gathering method  is based on observation and questionnaire. The society under study includes 83 personnel (employees of a factory which is a subsidiary of Iran Khodro. We used two questionnaires in this  study. One is questionnaire to verify macro ergonomic situation which planned and consisted of  30 questions that investigated different factors in working environment and was verified in terms  of stability and reliability (cronbach alpha = 0.72 and the other one was Minnesota job satisfaction  questionnaire which was distributed among people.   Results   This research shows over 1,500 extended hour's male workers, 69 percent of whom  reported "Chronic or Frequent" back pain, while 52 percent reported "Chronic or Frequent" wrist  pain. Sleep deprivation could possibly be damaging in terms of muscle, ligament, or tendon  injury. With the average extended-hours employee sleeping only 5.1 hours to 5.5 hours each day when working a night shift, they could face an increased risk of ergonomic injuries. The mean age of people under investigation is 30.8. Most people are in age group of 26-30 (44.6% most  individuals have 4 to 7 years working experience (56.6%. Macro ergonomic mean score in total  society under study was obtained as 59.8. The highest score of job satisfaction has been related to middle managers (69.2. Pearson correlation test showed that there was a direct relationship between general domain of macro ergonomic and job satisfaction.   Conclusion   There is a consistency between main enhanced

Development of risk assessment tool for foundry workers.

Science.gov (United States)

Mohan, G Madhan; Prasad, P S S; Mokkapati, Anil Kumar; Venkataraman, G

2008-01-01

Occupational ill-health and work-related disorders are predominant in manufacturing industries due to the inevitable presence of manual work even after several waves of industrial automation and technological advancements. Ergonomic risk factors and musculoskeletal disorders like low-back symptoms have been noted amongst foundry workers. The purpose of this study was to formulate and develop a Physical Effort Index to assess risk factor. The questionnaire tool applicable to foundry environment has been designed and validated. The data recorded through survey across the foundries has been subjected to regression analysis to correlate between proposed physical effort index and the standard Borg's Ratings of Perceived Exertion (RPE) scale. The physical efforts of sixty seven workers in various foundry shop floors were assessed subjectively. The 'Job factors' and 'Work environment' were the two major parameters considered in assessing the worker discomfort level at workplace. A relation between Borg's RPE scale and the above two parameters were arrived at, through regression analysis. The study demonstrates the prevalence of risk factors amongst foundry workers and the effectiveness of the proposed index in estimating the risk factor levels. RELEVANCE TO THE INDUSTRY: The proposed tool will assist foundry supervisors and managers to assess the risk factors and helps in better understanding of the workplace to avoid work-related disorders, ensuring better output.

Ergonomic and socioeconomic risk factors for hospital workers' compensation injury claims.

Science.gov (United States)

Boyer, Jon; Galizzi, Monica; Cifuentes, Manuel; d'Errico, Angelo; Gore, Rebecca; Punnett, Laura; Slatin, Craig

2009-07-01

Hospital workers are a diverse population with high rates of musculoskeletal disorders (MSDs). The risk of MSD leading to workers' compensation (WC) claims is likely to show a gradient by socioeconomic status (SES) that may be partly explained by working conditions. A single community hospital provided workforce demographics and WC claim records for 2003-2005. An ergonomic job exposure matrix (JEM) was developed for these healthcare jobs from direct observation of physical workload and extraction of physical and psychosocial job requirements from the O*NET online database. Occupational exposures and SES categories were assigned to workers through their O*NET job titles. Univariate and multivariate Poisson regression analyses were performed to estimate the propensity to file an injury claim in relation to individual factors, occupational exposures, and SES. The jobs with the highest injury rates were nurses, semi-professionals, and semi-skilled. Increased physical work and psychological demands along with low job tenure were associated with an increase in risk, while risk decreased with psychosocial rewards and supervisor support. Both occupational and individual factors mediated the relationship between SES and rate of injury claims. Physical and organizational features of these hospital jobs along with low job tenure predicted WC injury claim risk and explained a substantial proportion of the effects of SES. Further studies that include lifestyle risk factors and control for prior injuries and co-morbidities are warranted to strengthen the current study findings.

Optimizing the physical ergonomics indices for the use of partial pressure suits.

Science.gov (United States)

Ding, Li; Li, Xianxue; Hedge, Alan; Hu, Huimin; Feathers, David; Qin, Zhifeng; Xiao, Huajun; Xue, Lihao; Zhou, Qianxiang

2015-03-01

This study developed an ergonomic evaluation system for the design of high-altitude partial pressure suits (PPSs). A total of twenty-one Chinese males participated in the experiment which tested three types of ergonomics indices (manipulative mission, operational reach and operational strength) were studied using a three-dimensional video-based motion capture system, a target-pointing board, a hand dynamometer, and a step-tread apparatus. In total, 36 ergonomics indices were evaluated and optimized using regression and fitting analysis. Some indices that were found to be linearly related and redundant were removed from the study. An optimal ergonomics index system was established that can be used to conveniently and quickly evaluate the performance of different pressurized/non-pressurized suit designs. The resulting ergonomics index system will provide a theoretical basis and practical guidance for mission planners, suit designers and engineers to design equipment for human use, and to aid in assessing partial pressure suits. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Do we need sustainability as a new approach in human factors and ergonomics?

Science.gov (United States)

Zink, Klaus J; Fischer, Klaus

2013-01-01

The International Ergonomics Association Technical Committee 'Human Factors and Sustainable Development' was established to contribute to a broad discourse about opportunities and risks resulting from current societal 'mega-trends' and their impacts on the interactions among humans and other elements of a system, e.g. in work systems. This paper focuses on the underlying key issues: how do the sustainability paradigm and human factors/ergonomics interplay and interact, and is sustainability necessary as a new approach for our discipline? Based on a discussion of the sustainability concept, some general principles for designing new and enhancing existent approaches of human factors and ergonomics regarding their orientation towards sustainability are proposed. The increasing profile of sustainability on the international stage presents new opportunities for human factors/ergonomics. Positioning of the sustainability paradigm within human factors/ergonomics is discussed. Approaches to incorporating sustainability in the design of work systems are considered.

Ergonomics SA - Vol 24, No 2 (2012)

African Journals Online (AJOL)

Development of a Modular Test Stand for the Measuring of Dynamic Muscular Strain of Test Persons for the Simulation in Digital Human Models · EMAIL FULL TEXT ... Ergonomic intervention for reducing the exposure to musculoskeletal disorders risk factors in pharmaceutical production centre · EMAIL FULL TEXT EMAIL ...

Ergonomics: case study in a university library

OpenAIRE

Daniela Capri; Eliana Maria dos Santos Bahia; Adilson Luiz Pinto

2012-01-01

This final paper aimed to analyze the real ergonomics of a university library from Florianópolis and compare it with the ergonomics perceived by the user to perform an ergonomic diagnosis. In order to meet this goal two specific goals were established such as: describe the physical and environmental aspects of the library related to the real ergonomics and verify the actual perception of users about the library. As a theoretical approach, aspects of ergonomics and environmental ergonomics wer...

Riesgo ergonómico en empresas artesanales del sector de la manufactura, Santander. Colombia Ergonomic risk craft enterprises manufacturing sector, Santander. Colombia

Directory of Open Access Journals (Sweden)

Claudia Patricia Ardila Jaimes

2013-03-01

programs therefore requires recognizing these limitations, which could lead to muscle diseases, high rates of absenteeism and decreased productivity. Objectives Determine the ergonomic risk profile of the craft and jewelry snuff in the region of Santander, Colombia in 2010. Methods: This survey was a descriptive cross-sectional study where people were surveyed companies manufacturing sub-sectors of the tobacco and handmade jewelry. The main unit of analysis was the company. He filled out an instrument that identified ergonomic features of the culture of the companies. Results: We interviewed 15 tobacco companies and 10 jewelers. Companies do not have policies on occupational health in 73% to snuff sector and 80% for the jewelery sector. In both sectors the ergonomic factor repeatability was the most prevalent with 80% and 36.4% respectively. In turn, 60% of companies have established snuff redesign making job, compared to 10% presented by jewelery companies, in both sectors finally found a rate not exceeding 13% on completion of training on ergonomic risk control their workers. Conclusions: Ergonomic risk profile ergonomic in the tobacco industry and craft jeweler shows incipient considering be influenced by factors such as ignorance of the subject and lack of management commitment to implement programs to help minimize disease arising from activities taking place in each of the sectors.

Ergonomics in gynecologists' daily practice: A nationwide survey in The Netherlands.

Science.gov (United States)

Alleblas, Chantal C J; Formanoy, Margriet A G; Könemann, Reinier; Radder, Celine M; Huirne, Judith A; Nieboer, Theodoor E

2016-01-01

Gynecologists are exposed to multiple risk factors for developing physical complaints. To enhance the workplace ergonomics in gynecological practice, a more detailed insight about job content and associated demands is necessary to subsequently decrease the exposure to risk factors. The aim of this study was to investigate the prevalence of physical complaints and the presence of ergonomic constraints in Dutch gynecological practice. A questionnaire was distributed among the 1200 members of the Dutch Society of Obstetrics and Gynecology. It consisted of 52 Dutch questions derived from the validated Dutch Musculoskeletal Questionnaire. A total of 227 respondents completed the questionnaire (response rate 18.9%). Overall, 99.5% of the respondents rated their health status as reasonable or good. However, the twelve-month prevalence of physical complaints in one or more body part was 89.4%. Sustained adverse body postures were particularly reported for performing abdominal, and endoscopic surgery, and for assisting in vaginal surgery. Limited workspace, instruments, and patient size were reported by more than 60% of the respondents as constraints for adopting a neutral body posture during vaginal, endoscopic and abdominal surgery respectively. The results emphasize the necessity of enhancing ergonomics in gynecological practice. Better ergonomic circumstances will most likely benefit both the health of the gynecologists as well as the quality of surgical care.

Comparison of concepts in easy-to-use methods for MSD risk assessment.

Science.gov (United States)

Roman-Liu, Danuta

2014-05-01

This article presents a comparative analysis of easy-to-use methods for assessing musculoskeletal load and the risk for developing musculoskeletal disorders. In all such methods, assessment of load consists in defining input data, the procedure and the system of assessment. This article shows what assessment steps the methods have in common; it also shows how those methods differ in each step. In addition, the methods are grouped according to their characteristic features. The conclusion is that the concepts of assessing risk in different methods can be used to develop solutions leading to a comprehensive method appropriate for all work tasks and all parts of the body. However, studies are necessary to verify the accepted premises and to introduce some standardization that would make consolidation possible. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

System ergonomics as an approach to improve human reliability

International Nuclear Information System (INIS)

Bubb, H.

1988-01-01

The application of system technics on ergonomical problems is called system ergonomics. This enables improvements of human reliability by design measures. The precondition for this is the knowledge of how information processing is performed by man and machine. By a separate consideration of sensory processing, cognitive processing, and motory processing it is possible to have a more exact idea of the system element 'man'. The system element 'machine' is well described by differential equations which allow an ergonomical assessment of the manouverability. The knowledge of information processing of man and machine enables a task analysis. This makes appear on one hand the human boundaries depending on the different properties of the task and on the other hand suitable ergonomical solution proposals which improve the reliability of the total system. It is a disadvantage, however, that the change of human reliability by such measures may not be quoted numerically at the moment. (orig.)

Action in Ergonomics

Science.gov (United States)

Training Officer, 1975

1975-01-01

A discussion with James Crowley of British Steel Corporation on the changing face of ergonomics in practice today and yesterday examines the influence of experimental psychology on the method of study and data collection. The broadening scope of ergonomics from only safety concerns to cost effectiveness and the computer are analyzed. (Author/JB)

Ergonomics, education and children: a personal view.

Science.gov (United States)

Woodcock, A

2007-10-01

Educational ergonomics - the teaching of ergonomics and the design of environments where ergonomics teaching and learning might occur - has received little attention from ergonomists. This paper first describes the roots of the author's interest and research in educational ergonomics; second it provides a personal view of the opportunities and challenges posed by the two streams of educational ergonomics; and lastly it considers the implications of teaching ergonomics to children in terms of their personal development, the design of schools and the impact such initiatives might have on wider societal problems.

Implantation of an ergonomics administration system in a company: report of an occupational therapist specialist in ergonomics.

Science.gov (United States)

Moraes, Berla; Andrade, Valéria Sousa

2012-01-01

This article aims to describe step-by-step the implementation of an ergonomics administration system in a company from March 2009 till March 2011 by an occupational therapist specialist in ergonomics based on the OSHAS 18001 guidelines and the Regulatory Norms 17 manual. The process began with the definition of five requisites with bases on the manual of application of the Regulatory Norms 17: survey; materials individual transportation and discharge; workplace furniture; workplace equipments; work environment and organization of the work to be managed with bases on the OSHAS 18001 guidelines. The following steps were established: sensitization of the company high administration, elaboration and institution of an ergonomics politics, development of ergonomics committees, ergonomics analysis of the work with recommendation of ergonomic improvements, implantation of improvements and evaluation or the results. This research experiment suggests the importance not only of a guiding axle but also of a professional qualification and participation of the company on the implementation of an ergonomics management system.

Ergonomics: The Forgotten Variable.

Science.gov (United States)

Fitterman, L. Jeffrey

1998-01-01

Defines ergonomics and discusses design and environmental considerations. Suggests work-space requirements for: tables, chairs, monitor height, ambient noise and light, electricity, and environmental hazards. Includes sources for additional information related to ergonomic design. (AEF)

Ergonomic design in ancient Greece.

Science.gov (United States)

Marmaras, N; Poulakakis, G; Papakostopoulos, V

1999-08-01

Although the science of ergonomics did not actually emerge until the 20th century, there is evidence to suggest that ergonomic principles were in fact known and adhered to 25 centuries ago. The study reported here is a first attempt to research the ergonomics concerns of ancient Greeks, on both a conceptual and a practical level. On the former we present a collection of literature references to the concepts of usability and human-centred design. On the latter, examples of ergonomic design from a variety of fields are analysed. The fields explored here include the design of everyday utensils, the sculpture and manipulation of marble as a building material and the design of theatres. Though hardly exhaustive, these examples serve to demonstrate that the ergonomics principles, in content if not in name, actually emerged a lot earlier than is traditionally thought.

OBJECTIFICATION OF ERGONOMIC ASSESSMENT OF THE PILOT OPERATION ON THE BASIS OF “PHOTOSHOP – TECHNOLOGY”

Directory of Open Access Journals (Sweden)

Volodymyr Gorbunov

2013-12-01

Full Text Available On the basis of information technology “Photoshop” the means of the objective ergonomic evaluation of the professional activity of pilot on piloting the plane has been developed. Procedural characteristics, peculiarities and objective criteria if his work on aviation equipment is ergonomically acceptable, as well as the order of revealing the ergonomic shortcomings of the arrangement of his working place that decrease the flight safety from the position of human factor have been determined

Ergonomía y Terapia Ocupacional = Ergonomics and Occupational Therapy

Directory of Open Access Journals (Sweden)

Guzman Suárez, Olga Beatriz

2008-02-01

Full Text Available RESUMENEn éste artículo se dan a conocer algunas de las aplicaciones más importantes de la ergonomía en Terapia Ocupacional, puesto que a pesar de tener un gran reconocimiento en el sector trabajo, en donde hay un mayor predominio de estudio por parte de la ergonomía, aún se desconocen muchas de las actividades que pueden ser realizadas por éstos profesionales. Terapia Ocupacional abarca el estudio de todas las etapas de la vida del individuo, en cuanto a su desempeño ocupacional se refiere, lo cual garantiza un amplio campo de actuación profesional, que permite profundizar e investigar en diversas áreas, para que desde su experiencia y resultados se facilite el aporte a muchos proyectos de investigación que requieren de conceptos que son transversales a diferentes disciplinas y que pueden constituirse en conocimiento nuevo para la sociedad científica. Con la creación del Grupo de Salud Ocupacional y Ergonomía en la Universidad Manuela Beltrán, se pretende “Desarrollar proyectos de investigación en el campo de la ergonomía, aplicables en los contextos: laboral, escolar, social y familiar; que permitan la adaptación de diferentes entornos al ser humano y a su vez mejorar condiciones tendientes al logro de un óptimo desempeño y productividad”[1]. De esta manera, se inician proyectos de investigación con estudiantes de Terapia Ocupacional, cuyos avances han permitido escribir el presente articulo, se espera además la vinculación de otras áreas para su fortalecimiento. ABSTRACTIn this article they bring themselves to light some of the most important applications of the ergonomics in occupational therapy, since in spite of having a great recognition in the work sector, where there is a greater predominance of study on the part of the ergonomics, still many of the activities they do not know themselves that can be carried out for these professionals. The occupational therapy covers the study of all the phases of the life of

Facilitators & Barriers to the Adoption of Ergonomic Solutions in Construction

Science.gov (United States)

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Barnidge, Ellen; Weaver, Nancy; Evanoff, Bradley A.

2017-01-01

Background Rates of musculoskeletal disorders in construction remain high. Few studies have described barriers and facilitators to the use of available ergonomic solutions. This paper describes these barriers and facilitators and their relationship to the level of adoption. Methods Three analysts rated 16 proposed ergonomic solutions from a participatory ergonomics study and assessed the level of adoption, six adoption characteristics, and identified the category of adoption from a theoretical model. Results Twelve solutions were always or intermittently used and were rated positively for characteristics of relative advantage, compatibility with existing work processes, and trialability. Locus of control (worker vs. contractor) was not related to adoption. Simple solutions faced fewer barriers to adoption than those rated as complex. Conclusions Specific adoption characteristics can help predict the use of new ergonomic solutions in construction. Adoption of complex solutions must involve multiple stakeholders, more time, and shifts in culture or work systems. PMID:28195660

Ergonomics Contribution in Maintainability

Science.gov (United States)

Teymourian, Kiumars; Seneviratne, Dammika; Galar, Diego

2017-09-01

The objective of this paper is to describe an ergonomics contribution in maintainability. The economical designs, inputs and training helps to increase the maintainability indicators for industrial devices. This analysis can be helpful, among other cases, to compare systems, to achieve a better design regarding maintainability requirements, to improve this maintainability under specific industrial environment and to foresee maintainability problems due to eventual changes in a device operation conditions. With this purpose, this work first introduces the notion of ergonomics and human factors, maintainability and the implementation of assessment of human postures, including some important postures to perform maintenance activities. A simulation approach is used to identify the critical posture of the maintenance personnel and implements the defined postures with minimal loads on the personnel who use the equipment in a practical scenario. The simulation inputs are given to the designers to improve the workplace/equipment in order to high level of maintainability. Finally, the work concludes summarizing the more significant aspects and suggesting future research.

Bad Enough Ergonomics

Directory of Open Access Journals (Sweden)

Virve Peteri

2017-01-01

Full Text Available The article analyzes ergonomics as a social and cultural phenomenon, as something that is formulated and described by speakers in a specific social context; in a company that is specialized in producing ergonomic office furniture. Through a case study of an office chair, the article examines how ergonomics and its association with the vision of the potential users and their working spaces are constructed by the relevant actors in project meetings and individual interviews during the manufacturing process. The article is concerned with how, in the process of producing an office chair, the chair gains an identity of an aesthetic design object and how this comes to mean the reformulation of the idea of ergonomics. The empirical analysis also provides insight into how the somewhat grand discourses of soft capitalism or aesthetic economy are not abstract, but very much grounded in everyday practices of an organization. The article establishes how the vision shared by all the relevant actors invites active, flexible, and cooperative end-users and how the vision also has potential material effects. The research is an ethnographically inspired case study that draws ideas from discursive psychology.

Ergonomics and sustainability in the design of everyday use products.

Science.gov (United States)

Tosi, Francesca

2012-01-01

The relationship between Ergonomics and Design is a key element in the sustainability project, as well as in many other areas of experimental design. In the Design for Sustainability field, Ergonomics is a strategic factor for design culture innovation, providing designers with the necessary knowledge and skills regarding human characteristics and capabilities, as well as user needs and desires during use and interaction with products in work activities and everyday life. Ergonomics is also a strategic innovative factor in design development and manufacturing processes. In fact, ergonomics provides a methodological approach in user-product interaction evaluation processes through the use of participatory design and survey methods, user trials, direct observation, savings and resource conservation, etc.On the other hand, design offers solutions able to interpret user needs and expectations, at the same time suggesting new behaviors and lifestyles.In Design for Sustainability, the ergonomic and user-centered approach contributes greatly to lifestyles and innovative use of products--making it possible to understand and interpret real people needs and expectations in their everyday actions and behavior.New consumption patterns, new awareness of lifestyles, energy source consumption, purchasing methods and consumption style etc. can be supported by design innovation, responding to expressed and unexpressed user needs. With this in mind, the ergonomic approach represents the starting point for design choices and at the same time, a tool for assessing their appropriateness and effectiveness.

The influence of ergonomic devices on mechanical load during patient handling activities in nursing homes.

Science.gov (United States)

Koppelaar, Elin; Knibbe, Hanneke J J; Miedema, Harald S; Burdorf, Alex

2012-07-01

Mechanical load during patient handling activities is an important risk factor for low back pain among nursing personnel. The aims of this study were to describe required and actual use of ergonomic devices during patient handling activities and to assess the influence of these ergonomic devices on mechanical load during patient handling activities. For each patient, based on national guidelines, it was recorded which specific ergonomic devices were required during distinct patient handling activities, defined by transferring a patient, providing personal care, repositioning patients in the bed, and putting on and taking off anti-embolism stockings. During real-time observations over ~60 h among 186 nurses on 735 separate patient handling activities in 17 nursing homes, it was established whether ergonomic devices were actually used. Mechanical load was assessed through observations of frequency and duration of a flexed or rotated trunk >30° and frequency of pushing, pulling, lifting or carrying requiring forces 230 N from start to end of each separate patient handling activity. The number of patients and nurses per ward and the ratio of nurses per patient were used as ward characteristics with potential influence on mechanical load. A mixed-effect model for repeated measurements was used to determine the influence of ergonomic devices and ward characteristics on mechanical load. Use of ergonomic devices was required according to national guidelines in 520 of 735 (71%) separate patient handling activities, and actual use was observed in 357 of 520 (69%) patient handling activities. A favourable ratio of nurses per patient was associated with a decreased duration of time spent in awkward back postures during handling anti-embolism stocking (43%), patient transfers (33%), and personal care of patients (24%) and also frequency of manually lifting patients (33%). Use of lifting devices was associated with a lower frequency of forces exerted (64%), adjustable bed and

Green buildings need good ergonomics.

Science.gov (United States)

Hedge, A; Dorsey, J A

2013-01-01

A retrospective post-occupancy evaluation survey of 44 occupants in two Leadership in Energy and Environmental Design (LEED) Platinum buildings on a US college campus is reported. The Internet survey covered a range of indoor environment and ergonomics issues. Results show that working in these buildings were a generally positive experience for their health, performance and satisfaction. However, in one building there were persistent issues of variability in air temperature, air freshness, air quality and noise that affected the perceived health and performance of the occupants. Although the buildings were energy-efficient and sustainable structures, ergonomics design issues were identified. Implications for the role of ergonomics in green buildings and in the US LEED rating system are discussed. This survey identified a number of ergonomics design issues present in the LEED Platinum energy-efficient and sustainable buildings that were studied. These results highlight the importance of integrating ergonomics design into green buildings as a component in the US LEED rating system.

Designing for sustainability: ergonomics--carpe diem.

Science.gov (United States)

Martin, K; Legg, S; Brown, C

2013-01-01

Sustainability is a global issue that has worldwide attention but the role of ergonomics in designing for sustainability is poorly understood and seldom considered. An analysis of the literature on ergonomics, design and sustainability was conducted via a search of electronic databases: Scopus, Business Source Complete, Google Scholar, Emerald Publishing, Academic Search Premiere, Web of Science, Discover and Ergonomics Abstracts, for the years 1995-2012. A total of 1934 articles fulfilled the search criteria, but content analysis of the abstracts indicated that only 14 refereed articles addressed the main search criteria. Of those seven were in ergonomics journals and seven were in other journals (and were not written by ergonomists). It is concluded that the contribution of ergonomics to sustainability and sustainable design has been limited, even though the goals of sustainability and ergonomics are congruent. Ergonomists have not been at the forefront of research contributing to sustainability - and it is time for them to 'seize the day' - 'carpe diem'. This literature review shows that ergonomics contribution to sustainability is limited but since there is congruence between the disciplines it calls for ergonomists to become more involved and to seize the day - carpe diem.

AORN Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings.

Science.gov (United States)

Hughes, Nancy L; Nelson, Audrey; Matz, Mary W; Lloyd, John

2011-06-01

Prolonged standing during surgical procedures poses a high risk of causing musculoskeletal disorders, including back, leg, and foot pain, which can be chronic or acute in nature. Ergonomic Tool 4: Solutions for Prolonged Standing in Perioperative Settings provides recommendations for relieving the strain of prolonged standing, including the use of antifatigue mats, supportive footwear, and sit/stand stools, that are based on well-accepted ergonomic safety concepts, current research, and access to new and emerging technology. Published by Elsevier Inc.

Ergonomics, Engineering, and Business: Repairing a Tricky Divorce

DEFF Research Database (Denmark)

Jensen, Per Langaa; Broberg, Ole; Møller, Niels

2009-01-01

This paper discusses how the ergonomics community can contribute to make ergonomics a strategic element in business decisions on strategy and implementation of strategy. The ergonomics community is seen as a heterogeneous entity made up of educational and research activities in universities......, ergonomists and engineers with ergonomic skills, professional ergonomics and engineering societies, and the complex of occupational health and safety regulation. This community interacts in different ways with companies and hereby influences how companies are dealing with ergonomics. The paper argues...

Work-related musculoskeletal disorders (WMDs) risk assessment at core assembly production of electronic components manufacturing company

Science.gov (United States)

Yahya, N. M.; Zahid, M. N. O.

2018-03-01

This study conducted to assess the work-related musculoskeletal disorders (WMDs) among the workers at core assembly production in an electronic components manufacturing company located in Pekan, Pahang, Malaysia. The study is to identify the WMDs risk factor and risk level. A set of questionnaires survey based on modified Nordic Musculoskeletal Disorder Questionnaires have been distributed to respective workers to acquire the WMDs risk factor identification. Then, postural analysis was conducted in order to measure the respective WMDs risk level. The analysis were based on two ergonomics assessment tools; Rapid Upper Limb Assessment (RULA) and Rapid Entire Body Assessment (REBA). The study found that 30 respondents out of 36 respondents suffered from WMDs especially at shoulder, wrists and lower back. The WMDs risk have been identified from unloading process, pressing process and winding process. In term of the WMDs risk level, REBA and RULA assessment tools have indicated high risk level to unloading and pressing process. Thus, this study had established the WMDs risk factor and risk level of core assembly production in an electronic components manufacturing company at Malaysia environment.

A new ergonomically improved lathe.

Science.gov (United States)

Harten, G A; Derks, P M

1975-09-01

Following frequent complaints of lower back pain by lathe operators, a working group from the Philips Ergonomics Department have produced a model of an ergonomically improved lathe which ensures a healthy posture for the lathe operator at work. The same healthy posture can be adopted whether the operator is sitting or standing. The operator also has a good view of his work. At least two manufacturers have undertaken to develop this ergonomic lathe.

Human factors and ergonomics assessment of food pantry work: A case study.

Science.gov (United States)

Higgins, Nicholas A; Talone, Andrew B; Fraulini, Nicholas W; Smither, Janan A

2017-01-01

Research assessing work processes in food pantries has been limited to the client's experience and aspects of food donations [3-5]. Research on food pantries has yet to focus on understanding and evaluating worker-environment interaction. The present case study examined the interaction between workers and their work environment while performing common tasks in a food pantry. Data were collected through naturalistic observations and structured interviews. A task analysis was performed on the data. Several potential issues in the pantry were identified including with the workspace layout, environmental conditions, and signage. Human factors and ergonomics principles were then utilized to provide insights and recommendations (e.g., use of numbered rather than color-coded signage). Recommendations were provided to the case study food pantry for enhancing safety and productivity. Further research is needed to assess the generalizability of our findings to other food pantries.

Poor sitting posture and a heavy schoolbag as contributors to musculoskeletal pain in children: an ergonomic school education intervention program

Science.gov (United States)

Syazwan, AI; Azhar, MN Mohamad; Anita, AR; Azizan, HS; Shaharuddin, MS; Hanafiah, J Muhamad; Muhaimin, AA; Nizar, AM; Rafee, B Mohd; Ibthisham, A Mohd; Kasani, Adam

2011-01-01

Objectives The purpose of this study was to evaluate a multidisciplinary, interventional, ergonomic education program designed to reduce the risk of musculoskeletal problems by reducing schoolbag weight and correcting poor sitting posture. Methods Data were collected twice before and twice following intervention using the Standardized Nordic Body Map Questionnaire, a rapid upper limb assessment for posture evaluation, and schoolbag weight measurement in children aged 8 and 11 years attending two schools within the central region of Malaysia. Results Students who received the ergonomic intervention reported significant improvements in their sitting posture in a classroom environment and reduction of schoolbag weight as compared with the controls. Conclusion A single-session, early intervention, group ergonomics education program for children aged 8 and 11 years is appropriate and effective, and should be considered as a strategy to reduce musculoskeletal pain among schoolchildren in this age group. PMID:22003301

Ergonomics

Science.gov (United States)

... between you and your job conditions. Examples of ergonomic changes to your work might include Adjusting the position of your computer ... you are safe, comfortable, and less prone to work-related injuries.

Achieving LEED credit for ergonomics: Laying the foundation.

Science.gov (United States)

Lynch, Mallory

2014-01-01

Despite guidance from the United States Green Building Council (USGBC) on the requirements for earning a Leadership in Energy and Environmental Design (LEED) ergonomics credit in the Innovation in Design and Innovation in Operations category, few projects have received the credit. The University of California, Berkeley ergonomics program, Ergonomics@Work, has aligned the ergonomics strategy to those of the USGBC and LEED to achieve the ergonomics credit in several new buildings. This article describes the steps needed to obtain the credit and highlights the opportunities it creates to partner with the project team to promote ergonomics. As a profession it is up to ergonomists to create the road map that incorporates ergonomics into the green building design.

Software Support of Modelling using Ergonomic Tools in Engineering

Directory of Open Access Journals (Sweden)

Darina Dupláková

2017-08-01

Full Text Available One of the preconditions for correct development of industrial production is continuous interconnecting of virtual reality and real world by computer software. Computer software are used for product modelling, creation of technical documentation, scheduling, management and optimization of manufacturing processes, and efficiency increase of human work in manufacturing plants. This article describes the frequent used ergonomic software which helping to increase of human work by error rate reducing, risks factors of working environment, injury in workplaces and elimination of arising occupational diseases. They are categorized in the field of micro ergonomics and they are applicable at the manufacturing level with flexible approach in solving of established problems.

Identification of ergonomic issues that affect workers in oilrigs in desert environments.

Science.gov (United States)

Shikdar, Ashraf A

2004-01-01

The main objective of this research was to conduct an assessment of ergonomic-related problems in oilrigs in a desert environment. A checklist, physical audit and medical records were used in the investigation. The results showed significant health, environment and work-related problems that could be attributed to ergonomic deficiencies in the work system of the oilrig. Some major ergonomic issues identified were hard physical work, back pain, discomfort, hot environment, long shift, and diverse schedule. Ninety-four percent of the employees perceived the workday as very long, 79% were dissatisfied with the work schedule, while 61% of the employees perceived the summer work environment as extremely hot. Ergonomics should be considered in the work system design so as to reduce or eliminate problems in oilrigs in hot desert environments.

Ergonomic adjustments on a website from the usability of functions: Can deficits impair functionalities?

Directory of Open Access Journals (Sweden)

Dalila Giovana Pagnoncelli Laperuta

2017-09-01

Full Text Available Current study assesses whether deficits and usability of ergonomics impair the functionality of a university website. The concepts of functionality, usability and ergonomics were foregrounded by contextualizing them within a university profile. Later, a satisfaction survey was proposed to users to measure the satisfaction in the use of the website and to map the problems in usability. In addition, an ergonomic inspection was performed on the site by applying Bastien and Scapin´s ergonomic criteria. After analyzing results by descriptive statistics and content analysis, the ergonomic and usability problems were detected, or rather, feedback deficits, minimum action (navigation, flexibility and experience impaired the excellence of website´s functionality, causing dissatisfaction or abandonment of the website by the users. After the analysis of the results, ergonomic adjustments were suggested for the website. They may be a help in new website projects or adjust products in which usability has not been incorporated to the development process.

The Need to Reevaluate Nonresponding Ergonomic Patients

Science.gov (United States)

Scarpa, Philip J.; Field, Steven A.

1999-01-01

The Kennedy Space Center (KSC) Environmental Health (EH) contractor performs ergonomic evaluations under its Ergonomic Program. Any KSC employee may request one or the reviewing physician may request one for a patient during a visit to an onsite medical facility. As part of the ergonomic evaluation, recommendations are given to the patient to help reduce any ergonomic problems they experience. The recommendations, if implemented, are successful in the majority of KSC patients; however, a group of patients do not seem to improve. Those who don't improve may be identified by reevaluations, which are performed to implement maximum resolution of ergonomic problems.

A framework for performing workplace hazard and risk analysis: a participative ergonomics approach.

Science.gov (United States)

Morag, Ido; Luria, Gil

2013-01-01

Despite the unanimity among researchers about the centrality of workplace analysis based on participatory ergonomics (PE) as a basis for preventive interventions, there is still little agreement about the necessary of a theoretical framework for providing practical guidance. In an effort to develop a conceptual PE framework, the authors, focusing on 20 studies, found five primary dimensions for characterising an analytical structure: (1) extent of workforce involvement; (2) analysis duration; (3) diversity of reporter role types; (4) scope of analysis and (5) supportive information system for analysis management. An ergonomics analysis carried out in a chemical manufacturing plant serves as a case study for evaluating the proposed framework. The study simultaneously demonstrates the five dimensions and evaluates their feasibility. The study showed that managerial leadership was fundamental to the successful implementation of the analysis; that all job holders should participate in analysing their own workplace and simplified reporting methods contributed to a desirable outcome. This paper seeks to clarify the scope of workplace ergonomics analysis by offering a theoretical and structured framework for providing practical advice and guidance. Essential to successfully implementing the analytical framework are managerial involvement, participation of all job holders and simplified reporting methods.

Ergonomics and regulatory politics: the Washington State case.

Science.gov (United States)

Silverstein, Michael

2007-05-01

Every year in the State of Washington more than 50,000 workers experience a work related musculoskeletal disorder (WMSD), making up more than 30% of all worker compensation cases. In 2000, the Washington State Department of Labor and Industries (L&I) adopted a workplace ergonomics rule requiring employers to reduce worker exposure to hazards that cause or contribute to WMSDs. In 2003, the ergonomics rule was repealed by a margin of 53.5-46.5 in a statewide voter initiative. The official rulemaking record of approximately 100,000 pages, along with supplementary published and unpublished material, was reviewed. The relationship between scientific deliberation and the public policy process in adopting and repealing the ergonomics rule was assessed and described. The deliberative features of the regulatory, judicial, legislative, and ballot processes were compared. The ergonomics rule was successful in the regulatory and legal arenas where the process was most transparent and open to public involvement, differing views could be presented fully, and decision makers were expected to explain their decisions in light of the record. The rule fared most poorly in the legislature and at the ballot box when these features were lost and where considered deliberation was replaced by unconstrained political conflict. Additional checks and balances are needed.

Participatory ergonomic intervention for prevention of low back pain: assembly line redesign case.

Science.gov (United States)

Bernardes, João Marcos; Wanderck, Claudia; Moro, Antônio Renato Pereira

2012-01-01

This paper gives an overview of a participatory ergonomic intervention aimed at reducing low back pain cases in the dispatch department of a catalogue and e-commerce retail company. Based on the findings of the ergonomic analysis and design committee, the company's own employees redesigned the assembly line's layout. As a result of these changes two job tasks that involved manual material handling of boxes, identified by the revised NIOSH equation as posing an increased risk for lifting-related low back pain, were totally eliminated, and the employees responsible for moving boxes from the end of the assembly line to pallets on the ground were given more control over their jobs, and these jobs were also enriched with a new, less heavy task. These results demonstrate that participatory ergonomic interventions are a viable and effective strategy to reduce the exposure to work-related physical and psychosocial risk factors for low back pain.

Good ergonomic practices in a terminal facility

Energy Technology Data Exchange (ETDEWEB)

Anjos, Luciana Mattos dos; Curty, Adriana Favacho [CHEMTECH, Rio de Janeiro, RJ (Brazil); Franca, Guilherme Foerster do Monte; Jardino, Alessandro Neto [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

2009-07-01

Ergonomics is the technological design of the interplay between men, machines and environment in order to make labor activities more pleasant, profitable and functional. This article analyses the importance of ergonomic issues in process terminal plants and facilities, since the conceptual design stage until the detail engineering design. The ergonomic solutions are compared with practices that are current in engineering design plants nowadays. It will be shown how an inadequate ergonomic design often leads to accessibility problems and non-effectiveness during plant operation and dangers in emergency situations. The way perform an ergonomic design is to integrate the various disciplines that are involved in all stages of the design plant. The earlier the ergonomic design is implemented the better are the results in cost reduction, since later design modifications are more time-consuming and expensive. (author)

Sodium-glucose cotransporter 2 inhibitor use: A pharmaco-ergonomic qualification tool

Directory of Open Access Journals (Sweden)

Sanjay Kalra

2017-01-01

Full Text Available Pharmaco-ergonomics implies tailoring the drug therapy to an individual patient's requirement(s. The development of sodium-glucose cotransporter 2 inhibitor (SGLT2-i agents has impelled multiple clinical considerations, in the management of type-2 diabetes. This paper attempts to summarize the pharmaco-ergonomic considerations for these agents, in the form of an SGLT2-i qualification tool, based on a clinical score. This tool may serve as a simple and inexpensive practical guide, to optimize the risk-benefit considerations for SGLT2-i agents.

Ergonomics in dental pratice

Directory of Open Access Journals (Sweden)

Lucas Quaresemin de Oliveira

2017-08-01

Full Text Available The application of ergonomics is critical so that you can get a suitable working environment for professional, it is safe, healthy and comfortable. The objective was to identify whether the dental students followed the principles of ergonomics during clinical visits, evaluating, through photographs, compliance with ergonomic principles applied in dental practice, and finally identify the most affected sites by RSI / WMSDs of students enrolled in the dental clinic of the Faculdade IMED. Snapshots were made and only considered the position of the student operator, the same taken by the researcher using the mobile device. For each clinical procedure were taken two photographs in hidden angles to the student operator so that it did not change its ergonomic position to be observed. After obtaining the photos, they were evaluated and classified in scores from 0 to 3 according to the adequacy of the work placement, and then inserted into Excel and later in a database (SPSS 15.0. The following work is a cross-sectional, observational study, they were conducted in dental clinics IMED college. Among the 66 respondents, 14 were male and 52 female. It was found that 57 (86,3% reported feeling pain somewhere in the body, being the most affected sites neck (36.4%, and consecutively lower back (30.3% and higher than the back (27.3%. The results of the 63 procedures performed by the photographic shots were classified as “inadequate” in 49 procedures, “partially adequate” in 12 and “impossible to evaluate” in 2 procedures. The research results have shown a high prevalence of musculoskeletal pain and do not follow the ergonomic principles, emphasizing the need for more attention to ergonomics of the students.

Ergonomics: A Commonsense Activity That Can Save Schools Money.

Science.gov (United States)

Fleer, Paul; Gauthier-Green, Erin

2002-01-01

Describes the use of ergonomics to reduce work-related musculoskeletal disorders such as back pain, tendonitis, and carpal tunnel syndrome. Describes ergonomics and how to identify ergonomic problems, conduct a job hazard analysis, and develop solutions. Also lists common ergonomic errors in schools. Provides an ergonomic checklist for employees…

Ergonomics in radiology

Energy Technology Data Exchange (ETDEWEB)

Goyal, N. [Department of Radiology, University Hospital of Wales, Cardiff (United Kingdom)], E-mail: nimitgoyal@doctors.org.uk; Jain, N.; Rachapalli, V. [Department of Radiology, University Hospital of Wales, Cardiff (United Kingdom)

2009-02-15

The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations.

Ergonomics in radiology

International Nuclear Information System (INIS)

Goyal, N.; Jain, N.; Rachapalli, V.

2009-01-01

The use of computers is increasing in every field of medicine, especially radiology. Filmless radiology departments, speech recognition software, electronic request forms and teleradiology are some of the recent developments that have substantially increased the amount of time a radiologist spends in front of a computer monitor. Computers are also needed for searching literature on the internet, communicating via e-mails, and preparing for lectures and presentations. It is well known that regular computer users can suffer musculoskeletal injuries due to repetitive stress. The role of ergonomics in radiology is to ensure that working conditions are optimized in order to avoid injury and fatigue. Adequate workplace ergonomics can go a long way in increasing productivity, efficiency, and job satisfaction. We review the current literature pertaining to the role of ergonomics in modern-day radiology especially with the development of picture archiving and communication systems (PACS) workstations

Ergonomic material-handling device

Science.gov (United States)

Barsnick, Lance E.; Zalk, David M.; Perry, Catherine M.; Biggs, Terry; Tageson, Robert E.

2004-08-24

A hand-held ergonomic material-handling device capable of moving heavy objects, such as large waste containers and other large objects requiring mechanical assistance. The ergonomic material-handling device can be used with neutral postures of the back, shoulders, wrists and knees, thereby reducing potential injury to the user. The device involves two key features: 1) gives the user the ability to adjust the height of the handles of the device to ergonomically fit the needs of the user's back, wrists and shoulders; and 2) has a rounded handlebar shape, as well as the size and configuration of the handles which keep the user's wrists in a neutral posture during manipulation of the device.

Mapping ergonomics application to improve SMEs working condition in industrially developing countries: a critical review.

Science.gov (United States)

Hermawati, Setia; Lawson, Glyn; Sutarto, Auditya Purwandini

2014-01-01

In industrially developing countries (IDC), small and medium enterprises (SMEs) account for the highest proprotion of employment. Unfortunately, the working conditions in SMEs are often very poor and expose employees to a potentially wide range of health and safety risks. This paper presents a comprehensive review of 161 articles related to ergonomics application in SMEs, using Indonesia as a case study. The aim of this paper is to investigate the extent of ergonomics application and identify areas that can be improved to promote effective ergonomics for SMEs in IDC. The most urgent issue found is the need for adopting participatory approach in contrast to the commonly implemented top-down approach. Some good practices in ergonomics application were also revealed from the review, e.g. a multidisciplinary approach, unsophisticated and low-cost solutions, and recognising the importance of productivity. The review also found that more work is still required to achieve appropriate cross-cultural adaptation of ergonomics application.

Construction and application of an indicator system to assess the ergonomic performance of large and medium-sized construction companies.

Science.gov (United States)

Bezerra, Isabela Xavier Barbalho; de Carvalho, Ricardo José Matos

2012-01-01

This article proposes a system of indicators to evaluate the performance of companies in ergonomics for buildings. The system was developed based primarily on studies related to the performance evaluation of the construction industry and on Brazilian standards of ergonomics and work safety and had also the contribution of national and international indicators related to ergonomics, work safety, quality, sustainability, quality of work life and to organizational behavior. The indicators were named, classified and their components were assigned to compose the theoretical model SIDECE--System of Performance Indicators in Ergonomics for Building Construction (as for the Portuguese acronym), serving the major goals of ergonomics: health, safety and workers' satisfaction and production efficiency. The SIDECE is being validated along with the building construction companies in the city of Natal, Brazil, whose practical results, deriving from the application of instruments to collect field data, are under process, to be presented on the occasion of the 18th World Congress on Ergonomics. It is intended that the SIDECE be used by building construction companies as a support tool for excellence management.

Doing 'organizational work': expanding the conception of professional practice in ergonomics.

Science.gov (United States)

Theberge, N; Neumann, W P

2010-12-01

Literature on ergonomic practice contains many discussions of how ergonomists should work but far less attention has been paid to how they do work and the factors that influence their practice. In an effort to improve our understanding of ergonomic practice as it occurs and how it is conditioned by broader contexts, we conducted an interview study with 21 ergonomists in Canada. We were particularly interested to understand the different kinds of activities study participants engaged in during the course of their work, the challenges they faced and the strategies they employed for facing these challenges. Findings indicate that in the course of their professional practice ergonomists engage in a variety of types of activities. This includes consulting on risk factors as well as a proactive role of fostering the application of ergonomics in organizations. The process of advocating for ergonomics brought study participants into a variety of interactions and collaborations with workplace parties in a type of activity we have called "organizational work". In the course of doing organizational work, ergonomists utilize different strategies, including "political manoeuvring", tailoring data collection and report presentations to clients' concerns and 'goal hooking' in order to make the case for implementing ergonomics in workplaces. The article concludes with a list of "tips" for practicing ergonomists that are suggested by the analysis. Copyright © 2010 Elsevier Ltd. All rights reserved.

Participatory ergonomics to reduce exposure to psychosocial and physical risk factors for low back pain and neck pain: Results of a cluster randomised controlled trial

NARCIS (Netherlands)

Driessen, M.T.; Proper, K.I.; Anema, J.R.; Knol, D.L.; Bongers, P.M.; Beek, A.J. van der

2011-01-01

Objectives: This study investigated the effectiveness of the Stay@Work participatory ergonomics programme to reduce workers9 exposure to psychosocial and physical risk factors. Methods: 37 departments (n=3047 workers) from four Dutch companies participated in this cluster randomised controlled

Nanomaterials in the field of design ergonomics: present status.

Science.gov (United States)

Chowdhury, Anirban; Sanjog, J; Reddy, Swathi Matta; Karmakar, Sougata

2012-01-01

Application of nanotechnology and nanomaterials is not new in the field of design, but a recent trend of extensive use of nanomaterials in product and/or workplace design is drawing attention of design researchers all over the world. In the present paper, an attempt has been made to describe the diverse use of nanomaterials in product and workplace design with special emphasis on ergonomics (occupational health and safety; thermo-regulation and work efficiency, cognitive interface design; maintenance of workplace, etc.) to popularise the new discipline 'nanoergonomics' among designers, design users and design researchers. Nanoergonomics for sustainable product and workplace design by minimising occupational health risks has been felt by the authors to be an emerging research area in coming years. Use of nanomaterials in the field of design ergonomics is less explored till date. In the present review, an attempt has been made to extend general awareness among ergonomists/designers about applications of nanomaterials/nanotechnology in the field of design ergonomics and about health implications of nanomaterials during their use.

Ergonomic assessment of neck posture in the minimally invasive surgery suite during laparoscopic cholecystectomy.

Science.gov (United States)

van Det, M J; Meijerink, W J H J; Hoff, C; van Veelen, M A; Pierie, J P E N

2008-11-01

With the expanding implementation of minimally invasive surgery, the operating team is confronted with challenges in the field of ergonomics. Visual feedback is derived from a monitor placed outside the operating field. This crossover trial was conducted to evaluate and compare neck posture in relation to monitor position in a dedicated minimally invasive surgery (MIS) suite and a conventional operating room. Assessment of the neck was conducted for 16 surgeons, assisting surgeons, and scrub nurses performing a laparoscopic cholecystectomy in both types of operating room. Flexion and rotation of the cervical spine were measured intraoperatively using a video analysis system. A two-question visual analog scale (VAS) questionnaire was used to evaluate posture in relation to the monitor position. Neck rotation was significantly reduced in the MIS suite for the surgeon (p = 0.018) and the assisting surgeon (p < 0.001). Neck flexion was significantly improved in the MIS suite for the surgeon (p < 0.001) and the scrub nurse (p = 0.018). On the questionnaire, the operating room team scored their posture significantly higher in the MIS suite and also indicated fewer musculoskeletal complaints. The ergonomic quality of the neck posture is significantly improved in the MIS suite for the entire operating room team.

An assessment of the realism of digital human manikins used for simulation in ergonomics.

Science.gov (United States)

Nérot, Agathe; Skalli, Wafa; Wang, Xuguang

2015-01-01

In this study, the accuracy of the joint centres of the manikins generated by RAMSIS and Human Builder (HB), two digital human modelling (DHM) systems widely used in industry for virtual ergonomics simulation, was investigated. Eighteen variously sized females and males were generated from external anthropometric dimensions and six joint centres (knee, hip and four spine joints) were compared with their anatomic locations obtained from the three-dimensional reconstructed bones from a low-dose X-ray system. Both RAMSIS and HB could correctly reproduce external anthropometric dimensions, while the estimation of internal joint centres location presented an average error of 27.6 mm for HB and 38.3 mm for RAMSIS. Differences between both manikins showed that a more realistic kinematic linkage led to better accuracy in joint location. This study opens the way to further research on the relationship between the external body geometry and internal skeleton in order to improve the realism of the internal skeleton of DHMs, especially for a biomechanical analysis requiring information of joint load and muscle force estimation. This study assessed two digital human modelling (DHM) systems widely used in industry for virtual ergonomics. Results support the need of a more realistic human modelling, especially for a biomechanical analysis and a standardisation of DHMs.

Ergonomics Intervention in Unit Blast Furnace of a Typical Steel Company

Directory of Open Access Journals (Sweden)

Majid Mo'tamed-Zadeh

2013-10-01

Full Text Available Objective: Musculoskeletal disorders are a major part of occupational diseases in working environments. Prevention of the occurrence of these problems requires the use of ergonomic assessment techniques and intervention to improve working conditions. The purpose of this study was to investigate the prevalence of musculoskeletal disorders in workers in the blast furnace unit and the intervention to reduce the prevalence of these disorders. Materials & Methods: This study conducted on 24 people working in the furnace unit. Medical records of furnace workers were reviewed and Nordic Musculoskeletal Questionnaires (NMQ was completed. Drilling operation and oxygenation task were assessed by using Rapid Entire Body Assessment (REBA and workers were given the necessary training. Work stations of oxygenation for 24 workers were redesign and Drilling operation was mechanized. And employed workers with musculoskeletal disorders were changed. REBA and NMQ were used to reassess the intervention effects. Results: According to medical records and results of NMQ about 37.5 percent of workers had musculoskeletal disorders. REBA final score was 11 and 10 for the drilling and oxygenation tasks respectively. After redesigning the workstation, REBA final score was 5 for the oxygenation task and the drilling operation removed by mechanized. With the amendment procedures of musculoskeletal disorders was reduced 17.5 percent. Conclusion: According to REBA Score, the risk of musculoskeletal disorders was reduced by implementing amendments to the furnace unit and prevalence of musculoskeletal disorders also significantly reduced. Keyword: Ergonomic, MSDs, REBA, NMQ, Steel

Ergonomics in the operating room: protecting the surgeon.

Science.gov (United States)

Rosenblatt, Peter L; McKinney, Jessica; Adams, Sonia R

2013-01-01

To review elements of an ergonomic operating room environment and describe common ergonomic errors in surgeon posture during laparoscopic and robotic surgery. Descriptive video based on clinical experience and a review of the literature (Canadian Task Force classification III). Community teaching hospital affiliated with a major teaching hospital. Gynecologic surgeons. Demonstration of surgical ergonomic principles and common errors in surgical ergonomics by a physical therapist and surgeon. The physical nature of surgery necessitates awareness of ergonomic principles. The literature has identified ergonomic awareness to be grossly lacking among practicing surgeons, and video has not been documented as a teaching tool for this population. Taking this into account, we created a video that demonstrates proper positioning of monitors and equipment, and incorrect and correct ergonomic positions during surgery. Also presented are 3 common ergonomic errors in surgeon posture: forward head position, improper shoulder elevation, and pelvic girdle asymmetry. Postural reset and motion strategies are demonstrated to help the surgeon learn techniques to counterbalance the sustained and awkward positions common during surgery that lead to muscle fatigue, pain, and degenerative changes. Correct ergonomics is a learned and practiced behavior. We believe that video is a useful way to facilitate improvement in ergonomic behaviors. We suggest that consideration of operating room setup, proper posture, and practice of postural resets are necessary components for a longer, healthier, and pain-free surgical career. Copyright © 2013 AAGL. Published by Elsevier Inc. All rights reserved.

Awareness and Knowledge of Ergonomics Among Medical ...

African Journals Online (AJOL)

Aim: This cross‑sectional descriptive study aimed at assessing the level of awareness and knowledge of the science of ergonomics among Medical Laboratory Scientists in Benin City, Nigeria. Subjects and Methods: A total of 106 medical laboratory scientists comprising 64 and 42 in public and private laboratories, ...

Ergonomics Contributions to Company Strategies

NARCIS (Netherlands)

J. Dul (Jan); W.P. Neumann (Patrick)

2008-01-01

textabstractManagers usually associate ergonomics with occupational health and safety and related legislation, not with business performance. In many companies, these decision makers seem not to be positively motivated to apply ergonomics for reasons of improving health and safety. In order to

Ergonomic guidelines for using notebook personal computers. Technical Committee on Human-Computer Interaction, International Ergonomics Association.

Science.gov (United States)

Saito, S; Piccoli, B; Smith, M J; Sotoyama, M; Sweitzer, G; Villanueva, M B; Yoshitake, R

2000-10-01

In the 1980's, the visual display terminal (VDT) was introduced in workplaces of many countries. Soon thereafter, an upsurge in reported cases of related health problems, such as musculoskeletal disorders and eyestrain, was seen. Recently, the flat panel display or notebook personal computer (PC) became the most remarkable feature in modern workplaces with VDTs and even in homes. A proactive approach must be taken to avert foreseeable ergonomic and occupational health problems from the use of this new technology. Because of its distinct physical and optical characteristics, the ergonomic requirements for notebook PCs in terms of machine layout, workstation design, lighting conditions, among others, should be different from the CRT-based computers. The Japan Ergonomics Society (JES) technical committee came up with a set of guidelines for notebook PC use following exploratory discussions that dwelt on its ergonomic aspects. To keep in stride with this development, the Technical Committee on Human-Computer Interaction under the auspices of the International Ergonomics Association worked towards the international issuance of the guidelines. This paper unveils the result of this collaborative effort.

A novel approach to supporting relationship-centered care through electronic health record ergonomic training in preclerkship medical education.

Science.gov (United States)

Silverman, Howard; Ho, Yun-Xian; Kaib, Susan; Ellis, Wendy Danto; Moffitt, Marícela P; Chen, Qingxia; Nian, Hui; Gadd, Cynthia S

2014-09-01

How can physicians incorporate the electronic health record (EHR) into clinical practice in a relationship-enhancing fashion ("EHR ergonomics")? Three convenience samples of 40 second-year medical students with varying levels of EHR ergonomic training were compared in the 2012 spring semester. All participants first received basic EHR training and completed a presurvey. Two study groups were then instructed to use the EHR during the standardized patient (SP) encounter in each of four regularly scheduled Doctoring (clinical skills) course sessions. One group received additional ergonomic training in each session. Ergonomic assessment data were collected from students, faculty, and SPs in each session. A postsurvey was administered to all students, and data were compared across all three groups to assess the impact of EHR use and ergonomic training. There was a significant positive effect of EHR ergonomics skills training on students' relationship-centered EHR use (Pergonomic training sessions were needed to see an overall improvement in EHR use. In addition to replication of these results, further effectiveness studies of this educational intervention need to be carried out in GME, practice, and other environments.

Ergonomics on the Build Colombian Health of Workers

Directory of Open Access Journals (Sweden)

Jairo Ernesto Luna García

2014-06-01

Full Text Available The health of workers in Colombia traverses multiple challenges and difficulties, starting from the national, political and economic context, crossroads living social security system and the trends in the world of work. Faced with this situation, the ergonomics as a field of knowledge and action has multiple possibilities of contribution, which depend on not to see this disciplined reduced to a technical dimension, but encourage their contribution within a framework of action located and contextualized. Although it has emphasized the action of ergonomics in its contribu-tion to the prevention of muscle-skeletal disorders, their contribution to the health of workers can be very important, in a setting of search of the labor and social welfare as a complement to the prevention of occupational risks.

Use of Ergonomic Measures Related to Musculoskeletal Complaints among Construction Workers: A 2-year Follow-up Study

Science.gov (United States)

Boschman, Julitta S.; Frings-Dresen, Monique H.W.; van der Molen, Henk F.

2015-01-01

Background The physical work demands of construction work can be reduced using ergonomic measures. The aim of this study was to evaluate the use of ergonomic measures related to musculoskeletal disorders (MSDs) among construction workers. Methods A questionnaire was sent at baseline and 2 years later to 1,130 construction workers. We established (1) the proportion of workers reporting an increase in their use of ergonomic measures, (2) the proportion of workers reporting a decrease in MSDs, (3) the relative risk for an increase in the use of ergonomic measures and a decrease in MSDs, and (4) workers' knowledge and opinions about the use of ergonomic measures. Results At follow-up, response rate was 63% (713/1,130). The proportion of workers using ergonomic measures for vertical transport increased (34%, 144/419, p < 0.01); for measures regarding horizontal transport and the positioning of materials, no change was reported. The proportion of workers reporting shoulder complaints decreased (28%, 176/638, p = 0.02). A relationship between the use of ergonomic measures and MSDs was not found; 83% (581/704) of the workers indicated having sufficient knowledge about ergonomic measures. Lightening the physical load was reported to be the main reason for using them. Conclusion Only the use of ergonomic measures for vertical transport increased over a 2-year period. No relationship between the use of ergonomic measures and MSDs was found. Strategies aimed at improving the availability of ergonomic equipment complemented with individualized advice and training in using them might be the required next steps to increase the use of ergonomic measures. PMID:26106507

Ergonomics and simulation-based approach in improving facility layout

Science.gov (United States)

Abad, Jocelyn D.

2018-02-01

The use of the simulation-based technique in facility layout has been a choice in the industry due to its convenience and efficient generation of results. Nevertheless, the solutions generated are not capable of addressing delays due to worker's health and safety which significantly impact overall operational efficiency. It is, therefore, critical to incorporate ergonomics in facility design. In this study, workstation analysis was incorporated into Promodel simulation to improve the facility layout of a garment manufacturing. To test the effectiveness of the method, existing and improved facility designs were measured using comprehensive risk level, efficiency, and productivity. Results indicated that the improved facility layout generated a decrease in comprehensive risk level and rapid upper limb assessment score; an increase of 78% in efficiency and 194% increase in productivity compared to existing design and thus proved that the approach is effective in attaining overall facility design improvement.

The dentist's operating posture - ergonomic aspects.

Science.gov (United States)

Pîrvu, C; Pătraşcu, I; Pîrvu, D; Ionescu, C

2014-06-15

The practice of dentistry involves laborious high finesse dental preparations, precision and control in executions that require a particular attention, concentration and patience of the dentist and finally the dentist's physical and mental resistance. The optimal therapeutic approach and the success of practice involve special working conditions for the dentist and his team in an ergonomic environment. The meaning of the posture in ergonomics is the manner in which different parts of the body are located and thus the reports are established between them in order to allow a special task execution. This article discusses the posture adopted by dentists when they work, beginning with the balanced posture and going to different variants of posture. The ideal posture of a dentist gives him, on the one hand the optimal working conditions (access, visibility and control in the mouth) and on the other hand, physical and psychological comfort throughout the execution of the clinical acts. Although the theme of dentist posture is treated with great care and often presented in the undergraduate courses and the continuing education courses on ergonomics in dentistry, many dentists do not know the subject well enough nor the theoretical issues and therefore nor the practical applicability. The risk and perspective of the musculoskeletal disorders related to unbalanced postures should determine the dentists take postural corrective actions and compensation measures in order to limit the negative effects of working in a bad posture.

Investigation on musculoskeletal discomfort and ergonomics risk factors among production team members at an automotive component assembly plant

Science.gov (United States)

Aziz, Fazilah Abdul; Ghazalli, Zakri; Zuki Mohamed, Nik Mohd; Isfar, Amri

2017-10-01

Musculoskeletal discomfort (MSD) is very common condition in automotive industry. MSD is affecting the worker’s health, well-being and lower down the productivity. Therefore, the main objective of this study was to identify the prevalence of MSD and ergonomics risk factors among the production team members at a selected automotive component manufacturer in Malaysia. MSD data were collected by conducting structure interview with all participants by referring to the Cornell Musculoskeletal Disorder Questionnaire (CMDQ). Those production team members who achieved a total discomfort score for all body regions more than 100 was selected for job task assessment. The physical exposure risk factors of work related musculoskeletal disorders (WMSD) has evaluated by using Quick Exposure Check (QEC) techniques. The results of the study identified the severe MSD associated with production assembly team members. It is expected that the prevalence of MSD for those production assembly team members was lower back (75.4%), upper back (63.2%), right shoulder (61.4%), and right wrist (60%). The QEC analysis discovered that about 70% of job tasks had very high risks for neck posture and 60% had high risks for the back (in moving condition) and shoulder/arm postures. There were 80% of respondents have produced a high score for exposure risk to vibration. As a conclusion, the main implication of the current study is that special attention should be paid to the physical and psychosocial aspects in production team members with musculoskeletal discomfort to improve their safety, health, and well-being, maintain work ability and productivity.

Effective Office Ergonomics Awareness: Experiences from Global Corporates.

Science.gov (United States)

Madhwani, Kishore P; Nag, P K

2017-01-01

Use of laptops and hand-held devices increase the risk of musculoskeletal disorders (MSDs). More time spent on this activity adopting faulty postures, higher the risk of developing such injuries. This study addresses training on office ergonomics with emphasis on sustainable behavior change among employees to work in safe postures, as this is a top priority in the corporate environment, today. To explore training intervention methods that ensure wider coverage of awareness on office ergonomics, thereby promoting safer working and suggesting sustainable programs for behavior change and job enrichment. A cross-sectional study was conducted (2012 - 2017), encompassing corporate office employees of multinational corporations selected from India, Dubai (U.A.E), Nairobi (East Africa), Durban (South Africa), South East Asian countries (Philippines, Vietnam, Indonesia, Singapore, Malaysia, Thailand and Sri Lanka).Participant employees ( n = 3503) were divided into two groups to study the effect of interventions'; i.e., (a) deep training: 40 minute lecture by the investigator with a power point presentation ( n = 1765) using a mock workstation and (b) quick training: live demonstrations of 10 minutes ( n = 1738) using a live workstation. While deep training enhanced awareness in 95.51% and quick training in 96.59% globally, the latterwas much appreciated and educated maximum employees. From statistical analysis, quick training was found superior in providing comprehensive training and influencing behavior modification in India, but all over the world it was found highly superior in knowledge enlargement, skills enrichment in addition to providing comprehensive training ( P office ergonomics program. This could lead to propose as a best practice for corporate offices globally.

Visual ergonomics and computer work--is it all about computer glasses?

Science.gov (United States)

Jonsson, Christina

2012-01-01

The Swedish Provisions on Work with Display Screen Equipment and the EU Directive on the minimum safety and health requirements for work with display screen equipment cover several important visual ergonomics aspects. But a review of cases and questions to the Swedish Work Environment Authority clearly shows that most attention is given to the demands for eyesight tests and special computer glasses. Other important visual ergonomics factors are at risk of being neglected. Today computers are used everywhere, both at work and at home. Computers can be laptops, PDA's, tablet computers, smart phones, etc. The demands on eyesight tests and computer glasses still apply but the visual demands and the visual ergonomics conditions are quite different compared to the use of a stationary computer. Based on this review, we raise the question if the demand on the employer to provide the employees with computer glasses is outdated.

Fundamentals of ergonomic exoskeleton robots

NARCIS (Netherlands)

Schiele, A.

2008-01-01

This thesis is the first to provide the fundamentals of ergonomic exoskeleton design. The fundamental theory as well as technology necessary to analyze and develop ergonomic wearable robots interacting with humans is established and validated by experiments and prototypes. The fundamentals are (1) a

"RISK ASSESSMENT OF DEVELOPING DISTAL UPPER EXTREMITY DISORDERS BY STRAIN INDEX METHOD IN AN ASSEMBLING ELECTRONIC INDUSTRY"

OpenAIRE

M. Pourmahabadian; J.N. Saraji; M. Aghabeighi H. Saddeghi-Naeeni

2005-01-01

The strain index (SI) is a substantial advancement and has been devised to analyze ergonomic risks for distal upper extremity (DUE) disorders. This semi-quantitative tool allows for the measurement of hazards and does not require unduly lengthy training to begin to use it accurately. Uses of the strain index include analysis of a current job to assess whether it is safe or hazardous, quantification of the risks, and assistance in the initial design of a job or in the redesign of a job. The ai...

Limited economic evaluation to assess the effectiveness of a university-wide office ergonomics program.

Science.gov (United States)

Bidassie, Balmatee; McGlothlin, James D; Goh, Alina; Feyen, Robert G; Barany, James W

2010-05-01

The objective of this research was to evaluate the effectiveness and provide a limited economic evaluation of an office ergonomics program at a major university from 1995 to 2007. The relationship between office-related recordable injuries, reported lost time, severity of these injuries, and the Workers' Compensation (WC) paid was analyzed and the corresponding incident cost was calculated. Two major datasets analyzed were OSHA 200/300 logs (1991-2007) and WC claims paid (1999-2007). Since the beginning of the office ergonomics program in 1995 and through 2007 (13-year period), the number of office cumulative trauma disorder (CTD) cases decreased by 53%. Since the official start (in 1999) of a 50-50 cost share agreement for office equipment purchases between the university's Safety and Health Department (SHD) and the university departments evaluated, it was observed that the incident rate decreased by 63%, Total Days Away/restrict or Transfer (DART) rate decreased by 41%, Lost Time Case (LTC) rate decreased by 71% and office-related carpal tunnel syndrome decreased by almost 50%. The long-term goal of this research is to demonstrate the self-sustainability of an office ergonomics program by showing that equipment costs are eventually offset by a decrease in WC claims paid and lost time from office-related injuries and illnesses. While limited, this research helps in cost-justifying the implementation of future office ergonomics programs for large organizations. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Determination of an Ergonomically Sound Glovebox Glove Port Center Line

Energy Technology Data Exchange (ETDEWEB)

Christman, Marissa St John [Los Alamos National Laboratory

2016-11-30

Determine an ergonomic glovebox glove port center line location which will be used for standardization in new designs, thus allowing for predictable human work performance, reduced worker exposure to radiation and musculoskeletal injury risks, and improved worker comfort, efficiency, health, and safety.

Determination of an Ergonomically Sound Glovebox Glove Port Center Line

International Nuclear Information System (INIS)

Christman, Marissa St; Land, Whitney Morgan

2016-01-01

Determine an ergonomic glovebox glove port center line location which will be used for standardization in new designs, thus allowing for predictable human work performance, reduced worker exposure to radiation and musculoskeletal injury risks, and improved worker comfort, efficiency, health, and safety.

The application of an industry level participatory ergonomics approach in developing MSD interventions.

Science.gov (United States)

Tappin, D C; Vitalis, A; Bentley, T A

2016-01-01

Participatory ergonomics projects are traditionally applied within one organisation. In this study, a participative approach was applied across the New Zealand meat processing industry, involving multiple organisations and geographical regions. The purpose was to develop interventions to reduce musculoskeletal disorder (MSD) risk. This paper considers the value of an industry level participatory ergonomics approach in achieving this. The main rationale for a participative approach included the need for industry credibility, and to generate MSD interventions that address industry level MSD risk factors. An industry key stakeholder group became the primary vehicle for formal participation. The study resulted in an intervention plan that included the wider work system and industry practices. These interventions were championed across the industry by the key stakeholder group and have extended beyond the life of the study. While this approach helped to meet the study aim, the existence of an industry-supported key stakeholder group and a mandate for the initiative are important prerequisites for success. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics for enhancing detection of machine abnormalities.

Science.gov (United States)

Illankoon, Prasanna; Abeysekera, John; Singh, Sarbjeet

2016-10-17

Detecting abnormal machine conditions is of great importance in an autonomous maintenance environment. Ergonomic aspects can be invaluable when detection of machine abnormalities using human senses is examined. This research outlines the ergonomic issues involved in detecting machine abnormalities and suggests how ergonomics would improve such detections. Cognitive Task Analysis was performed in a plant in Sri Lanka where Total Productive Maintenance is being implemented to identify sensory types that would be used to detect machine abnormalities and relevant Ergonomic characteristics. As the outcome of this research, a methodology comprising of an Ergonomic Gap Analysis Matrix for machine abnormality detection is presented.

Analysis of the implementation of ergonomic design at the new units of an oil refinery.

Science.gov (United States)

Passero, Carolina Reich Marcon; Ogasawara, Erika Lye; Baú, Lucy Mara Silva; Buso, Sandro Artur; Bianchi, Marcos Cesar

2012-01-01

Ergonomic design is the adaptation of working conditions to human limitations and skills in the physical design phase of a new installation, a new working system, or new products or tools. Based on this concept, the purpose of this work was to analyze the implementation of ergonomic design at the new industrial units of an oil refinery, using the method of Ergonomic Workplace Assessment. This study was conducted by a multidisciplinary team composed of operation, maintenance and industrial safety technicians, ergonomists, designers and engineers. The analysis involved 6 production units, 1 industrial wastewater treatment unit, and 3 utilities units, all in the design detailing phase, for which 455 ergonomic requirements were identified. An analysis and characterization of the requirements identified for 5 of the production units, involving a total of 246 items, indicated that 62% were related to difficult access and blockage operations, while 15% were related to difficulties in the circulation of employees inside the units. Based on these data, it was found that the ergonomic requirements identified in the design detailing phase of an industrial unit involve physical ergonomics, and that it is very difficult to identify requirements related to organizational or cognitive ergonomics.

The Influence of Ergonomic Training on Low Back and Neck Pains in Female Hospital Personnel

Directory of Open Access Journals (Sweden)

Saeidi

2014-07-01

Full Text Available Background Prevalence of low back pain (LBP and neck pain (NP in workers, especially in nurses is high, but their knowledge of ergonomics is not enough. Objectives The aim of this study was to evaluate the impact of ergonomic training on low back pain and neck pain, posture, and function in female hospital personnel of Najaf-Abad, Iran. Patients and Methods In this queasy experimental study, 47 female staffs with LBP or NP were selected through a simple consecutive sampling method. The subjects completed a questionnaire on LBP and NP and were evaluated for posture, back tests, and cost of related treatments. Afterward, they participated in an ergonomic training program, including face to face and group education sessions on ergonomic risk factors for LBP and NP, in the work place. After six months of follow up, all the tests and data collection were repeated and data was analyzed using paired t-test and regression analysis. Results Prevalence of LBP and NP were 87% and 45.7%, respectively. Repetitive motions were the most frequent cause of pain (67%. Pain intensity, posture, risk of musculoskeletal disorders, weight, waist circumference, sick leaves, and the costs of treatments reduced significantly after intervention (P < 0.05. Conclusions With regards to the influence of ergonomic training on improving LBP and NP and decreasing the treatment costs, this intervention beside others can be useful for controlling musculoskeletal disorders in hospital personnel.

Ergonomic analysis of the work conditions of porters and owners of the Supply Center of Campinas, SP.

Science.gov (United States)

Vedovato, Tatiana Giovanelli; Monteiro, Maria Inës; Masson, Valéria Aparecida

2012-01-01

Transforming work conditions is part of the ergonomic action that should help to improve work situations that brings risks to the workers health. six workers were observed in different locations of the supply center (Central Free Market, Free Market 2, Flowers Market and Permanent Shed 4). During the observation of workers to the Ergonomic Analysis of Work - AET (Rohmert and Landau) was performed. The workers were divided into two groups: porters and owners. The porters were the most susceptible to the risks of work and minor accidents with sharp wood from boxes or even risk of traffic accidents as pedestrians. However, regarding the use of mental ability for negotiations, use of computers and organizing and planning the establishment of work, the owners were the ones that most time played these activities. The ergonomics advocates work that can be transformed and that favors employee and employer. It is, therefore, intended to redefine the strategies that are embedded into the organizational structure of work.

Assessment of knowledge, practices, and work place condition related to ergonomics among dental students of Bhopal city - A questionnaire study

Directory of Open Access Journals (Sweden)

Swapna Munaga

2013-01-01

Full Text Available Background: Dental profession is susceptible to various postural and nonpostural occupational risks. Aim : To determine knowledge, practice, and condition of work place regarding ergonomic posture among dental students from Bhopal city, Central India. Also to observe any correlation among knowledge, practice, and condition of work place scores. Materials and Methods : A self-administered questionnaire study was conducted among 231 dental students. The questionnaire consisted of three parts: Knowledge, practice, and condition of work place. Analysis of variance was used to compare mean of knowledge, practice of clinical posture, and condition of work place. Pearson′s correlation coefficient has been applied to compute correlation among knowledge, practice, and condition of work place scores. A P value < 0.05 was considered significant for all statistical analyses. Results : We found that 70% of dental students perform torsion of the body and cervical flexion to improve vision and prefer direct vision when working. Only 59% reported that they are working with ergonomically designed dental unit and instruments. Most of them reported that the work stool is not comfortable. Mean knowledge, practice, and condition of work place scores were 3.93 (1.26, 5.01 (1.58, and 2.60 (1.14, respectively. Significant differences between the groups were noted for means of practice scores (P ≤ 0.01. Significant linear correlation was seen between knowledge-practice scores (r = 0.20 (P ≤ 0.01, practice-condition of work place scores (r = 0.14 (P ≤ 0.05, and knowledge-condition of work place scores (r = 0.14 (P ≤ 0.05. Conclusion : The knowledge of ergonomic postural requirements and their clinical application among the dental students surveyed were not satisfactory. A multifactorial approach that includes preventive education, postural and positioning strategies, proper selection, and use of ergonomic equipment should be employed.

From an urologist view: are we safe with endoscopic surgery? Overview of ergonomic problems encountered by the urologist during video endoscopic surgery.

Science.gov (United States)

Sataa, Sallami; Benzarti, Aida; Ben Jemaa, Abdelmajid

2012-12-01

The importance of minimally invasive surgery in urology has constantly increased in the last 20 years. Endoscopic resection of prostate and bladder tumors is actually a gold standard with many advantages for patients. To analyze the problems related to the ergonomic conditions faced by urologist during video endoscopic surgery by review of the recent literature. All evidence-based experimental ergonomic studies conducted in the fields of urology endoscopic surgery and applied ergonomics for other professions working with a display were identified by PubMed searches. Data from ergonomic studies were evaluated in terms of efficiency as well as comfort and safety aspects. Constraint postures for urologists are described and ergonomic requirements for optimal positions are discussed. The ergonomics of urological endoscopic surgery place urologists at risk for potential injury. The amount of neck flexion or extension, the amount of shoulder girdle adduction or abduction used, and stability of the upper extremities during surgery; which are maintained in a prolonged static posture; are the main risk factors. All these constraints may lead to muscle and joint fatigue, pain, and eventual musculoskeletal injury. Moreover, these issues may impact surgical accuracy. Urologist posture, operating period, training are important ergonomic factor during video surgery to prevent musculoskeletal disorders.

The Effects of Training, Feedback, and Participant Involvement in Behavioral Safety Observations on Office Ergonomic Behavior

Science.gov (United States)

Sasson, Joseph R.; Austin, John

2005-01-01

Eleven computer terminal operators participated in an experiment that assessed effects of several interventions aimed at increasing safe ergonomic performance. All participants received ergonomics training and performance feedback while six of them collected observations of safe behavior among the remaining five participants. Effects of…

Ergonomic evaluation of workload by milk production - a bibliometric analysis.

Science.gov (United States)

de Oliveira, Claudilaine Caldas; Pereira Moro, Antônio Renato; Ulbricht, Leandra; Belinelli, Marjorie; de Souza, Gilberto F M; Gabriel, Michele; Zattar, Izabel Cristina

2017-09-21

The purpose of this study was to select in a structured manner the relevant articles with scientific recognition, and simultaneously identify the characteristics of these publications that may scientifically enrich the theme in a portfolio of papers. The theme involves ergonomics in milk production as a criterion for evaluating and improving organizational performance in the milking sector. The study used ProKnow-C as a theoretical instrument for intervention. The main results show: i) a bibliographic portfolio of 18 items aligned with the view adopted by researchers which served as a theoretical framework for this research; ii) The article entitled "Wrist positions and movements as possible risk factors during machine milking", by Marianne Stål, Gert-Åke Hansson and Ulrich Moritz in 1999 and published in the Journal of Applied Ergonomics presented the highest scientific recognition, iii) the authors highlighted in the bibliographic portfolio or in its references researching the subject are Gert-Åke Hansson, Marianne Stål and Stefan Pinzke, and iv) the International Journal of Industrial Ergonomics shows the highest number of scientific articles in the bibliographic portfolio. The studies selected using the methodology indicate research in ergonomics focused on the production of milk in rural areas, specifically in the milking sector, are generally related to the health and safety of the workers.

The Changes of Ergonomics in Hungary and Engineering Education

OpenAIRE

Istvan Lükö

2013-01-01

Modern engineer training is not conceivable without knowledge of work psychology and ergonomics. In this paper, we would like to outline the situation of work psychology and ergonomics as well as their changes in Hungary. The technical approach to health and safety is linked to human health care, and, through that, to ergonomics. The traditional notion of ergonomics is the 'ergonomics of scales, levers and pedals', which has now become a field of research helping the development of socio-tech...

The Changes of Ergonomics in Hungary and Engineering Education

Directory of Open Access Journals (Sweden)

Istvan Lükö

2013-01-01

Full Text Available Modern engineer training is not conceivable without knowledge of work psychology and ergonomics. In this paper, we would like to outline the situation of work psychology and ergonomics as well as their changes in Hungary. The technical approach to health and safety is linked to human health care, and, through that, to ergonomics. The traditional notion of ergonomics is the 'ergonomics of scales, levers and pedals', which has now become a field of research helping the development of socio-technical systems. Here, we present the developmental stages of ergonomics, divided into six periods, first, and then the relationship between environmental ergonomics and health and safety. In the last chapter, I shall expound a few details from Hungarian investigations in work psychology, as well as from the activity of prominent academic circles at certain universities.

Translating concepts of complexity to the field of ergonomics.

Science.gov (United States)

Walker, Guy H; Stanton, Neville A; Salmon, Paul M; Jenkins, Daniel P; Rafferty, Laura

2010-10-01

Since 1958 more than 80 journal papers from the mainstream ergonomics literature have used either the words 'complex' or 'complexity' in their titles. Of those, more than 90% have been published in only the past 20 years. This observation communicates something interesting about the way in which contemporary ergonomics problems are being understood. The study of complexity itself derives from non-linear mathematics but many of its core concepts have found analogies in numerous non-mathematical domains. Set against this cross-disciplinary background, the current paper aims to provide a similar initial mapping to the field of ergonomics. In it, the ergonomics problem space, complexity metrics and powerful concepts such as emergence raise complexity to the status of an important contingency factor in achieving a match between ergonomics problems and ergonomics methods. The concept of relative predictive efficiency is used to illustrate how this match could be achieved in practice. What is clear overall is that a major source of, and solution to, complexity are the humans in systems. Understanding complexity on its own terms offers the potential to leverage disproportionate effects from ergonomics interventions and to tighten up the often loose usage of the term in the titles of ergonomics papers. STATEMENT OF RELEVANCE: This paper reviews and discusses concepts from the study of complexity and maps them to ergonomics problems and methods. It concludes that humans are a major source of and solution to complexity in systems and that complexity is a powerful contingency factor, which should be considered to ensure that ergonomics approaches match the true nature of ergonomics problems.

Ergonomic evaluation and comparison of wood harvesting systems in Northwest Russia.

Science.gov (United States)

Gerasimov, Yuri; Sokolov, Anton

2014-03-01

A comparison of 14 currently applicable wood harvesting systems was assessed with respect to ergonomic point of view. For this purpose, the research method, based on the Hodges-Lehmann rule and the integrated work-severity rate of single machinery, was developed for ergonomic evaluation of cut-to-length, tree-length and full-tree harvesting systems. Altogether, about 130 different parameters of 36 units of equipment that impact on the ergonomics and work conditions were measured and estimated in interviews undertaken directly at forestry harvesting workplaces in 15 logging companies in the Republic of Karelia, Northwest Russia. Then the results were compared to the effective norms, and the degree of compliance with the stipulated values was determined. The estimates obtained for the degree of compliance were combined. This permits a direct comparison of the workload on forestry harvesting workers such as operators, lumberjacks and choker setters. In many respects, the current ergonomic standard is standard, except for the operators of cable skidders, chainsaws and choker settings. Visibility and work postures were considered to be the most critical features influencing the operator's performance. Problems still exist, despite the extensive development of cabs. The best working conditions in terms of harvesting systems were provided by "harvester + forwarder" in cut-to-length harvesting, and "feller-buncher + grapple skidder" in full-tree harvesting. The motor-manual tree-length harvesting performed with cable skidders showed the worst results in terms of ergonomics. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomic Improvements for Foundries

Energy Technology Data Exchange (ETDEWEB)

Frank Peters; Patrick Patterson

2002-06-18

The goal of this project was to make improvements to the production systems of the steel casting industry through ergonomic improvements. Because of the wide variety of products, the wide range of product sizes, and the relatively small quantities of any particular product, manual operations remain a vital part of the production systems of the steel casting companies. Ergonomic improvements will assist the operators to more efficiently and consistently produce quality products.

Ergonomía

OpenAIRE

Rodríguez Mondelo, Pedro Manuel

1999-01-01

Conté: 1. Fundamentos. 2. Confort y estrés térmico. La obra ofrece una visión general de los aspectos básicos de la ergonomía. Está dividida en ocho capítulos, que abordan los temas de relaciones dimensionales, relaciones informáticas y de control, relaciones ambientales, gasto energético y capacidad de trabajo físico y trabajo mental. El libro pretende ser una guía básica para aquellas personas que se inicien en el apasionante campo de la ergonomía.

Advancing Ergonomic Expertise in Occupational Therapists: Using an Online Course to Facilitate Knowledge Acquisition and Application of Ergonomics in Daily Practice

Science.gov (United States)

Finch, Denise E.

2012-01-01

Health promotion, prevention of disease and disability, and enhancing participation in meaningful life activities are areas that occupational therapists (OT) can contribute to at the individual, organizational and population levels (AOTA, 2008; Scaffa, Van Slyke & Brownson, 2008). OTs that are skilled in ergonomic assessment and evidence-based…

Comparative assessment of surgeons' task performance and surgical ergonomics associated with conventional and modified flank positions: a simulation study.

Science.gov (United States)

Fan, Yu; Kong, Gaiqing; Meng, Yisen; Tan, Shutao; Wei, Kunlin; Zhang, Qian; Jin, Jie

2014-11-01

Flank position is extensively used in retroperitoneoscopic urological practice. Most surgeons follow the patients' position in open approaches. However, surgical ergonomics of the conventional position in the retroperitoneoscopic surgery is poor. We introduce a modified position and evaluated task performance and surgical ergonomics of both positions with simulated surgical tasks. Twenty-one novice surgeons were recruited to perform four tasks: bead transfer, ring transfer, continuous suturing, and cutting a circle. The conventional position was simulated by setting an endo-surgical simulator parallel to the long axis of a surgical desk. The modified position was simulated by rotating the simulator 30° with respect to the long axis of the desk. The outcome measurements include task performance measures, kinematic measures for body alignment, surface electromyography, relative loading between feet, and subjective ratings of fatigue. We observed significant improvements in both task performance and surgical ergonomics parameters under the modified position. For all four tasks, subjects finished tasks faster with higher accuracy (p ergonomics part: (1) The angle between the upper body and the head was decreased by 7.4 ± 1.7°; (2) The EMG amplitude collected from shoulders and left lumber was significantly lower (p ergonomics. With a simulated surgery, we demonstrated that our modified position could significantly improve task performance and surgical ergonomics. Further studies are still warranted to validate these benefits for both patients and surgeons.

Ergonomic Intervention Effect in Reducing Musculoskeletal Disorders in Staff of Shiraz Medical School

Directory of Open Access Journals (Sweden)

Keyvan Pakshir

2012-05-01

Full Text Available Background and aims: High percentage of musculoskeletal disorders occurs due to awkward working posture and poor workstation design. So this study was conducted to determine the prevalence rate of musculoskeletal disorders , evaluate workstations and investigate the effectiveness of ergonomic interventional measures among medical school staff of Shiraz University of Medical Sciences (SUMS.   Methods: In this interventional study, 200 employees of different units of medical school of SUMS participated. They were randomly divided into experimental and control groups. Data were collected via anonymous questionnaire, RULA and QEC techniques as well as an ergonomic workstation checklist that was used to evaluate working conditions.   Results: The results showed that after conducting interventional program for the experimental group there was a significant relationship between employees' increased awareness of ergonomics and workstation improvement (p≤0.05. Additionally, the prevalence rate of reported musculoskeletal disorders in experimental group was significantly reduced following intervention (p≤0.05. After corrective measures, level of risk was decreased and working postures were improved. A significant relationship was observed between risk levels and neck and shoulder pain in the experimental group (p≤0.05 . Following the intervention, workstations scores were increased significantly. Conclusion: On the basis of the findings of this study, it could be noted that the ergonomic interventional program was effective to improve working posture and workstations as well as to reduce the prevalence of musculoskeletal disorders among the staff.

Indonesia ergonomics roadmap: where we are going?

Science.gov (United States)

Wignjosoebroto, Sritomo

2007-12-01

There are so many definitions for ergonomics terms such as human factors, human factors engineering, human engineering, human factors psychology, engineering psychology, applied ergonomics, occupational ergonomics, industrial ergonomics and industrial engineering. The most inclusive terms are ergonomics and human factors. Both represent the study of work and the interaction between people and their work environmental systems. The main objective is especially fitting with the need to design, develop, implement and evaluate human-machine and environment systems that are productive, comfortable, safe and satisfying to use. The work of the ergonomists in Indonesia--most of them are academicians--have one thing in common, i.e. with the appropriate type of ergonomic approaches to interventions; there would be improvements in productivity, quality of working conditions, occupational safety and health (OSH), costs reduction, better environment, and increase in profits. So many researches, training, seminars and socialization about ergonomics and OSH have been done concerning micro-to-macro themes; but it seems that we are practically still running at the same place up to now. In facts, workers are still working using their traditional or obsolete methods in poor working conditions. Accidents are still happening inside and outside industry with the main root-cause being human "unsafe behavior" and errors. Industrial products cannot compete in the global market, and so many manufacturing industries collapsed or relocated to foreign countries. This paper discusses such a roadmap and review what we ergonomists in Indonesia have done and where we are going to? This review will be treated in the field of ergonomics and OSH to take care the future Indonesia challenges. Some of the challenges faced are care for the workers, care for the people, care for the quality and productivity of work, care for the new advanced technologies, care for the environment, and last but not least

Effects of participatory ergonomic intervention on the development of upper extremity musculoskeletal disorders and disability in office employees using a computer.

Science.gov (United States)

Baydur, Hakan; Ergör, Alp; Demiral, Yücel; Akalın, Elif

2016-06-16

To evaluate the participatory ergonomic method on the development of upper extremity musculoskeletal disorders and disability in office employees. This study is a randomized controlled intervention study. It comprised 116 office workers using computers. Those in the intervention group were taught office ergonomics and the risk assessment method. Cox proportional hazards model and generalized estimating equations (GEEs) were used. In the 10-month postintervention follow-up, the possibility of developing symptoms was 50.9%. According to multivariate analysis results, the possibility of developing symptoms on the right side of the neck and in the right wrist and hand was significantly less in the intervention group than in the control group (pergonomic intervention decreases the possibility of musculoskeletal complaints and disability/symptom level in office workers.

Ergonomic analysis of microlaryngoscopy

Science.gov (United States)

Statham, Melissa McCarty; Sukits, Alison L.; Redfern, Mark S.; Smith, Libby J.; Sok, John C.; Rosen, Clark A.

2016-01-01

Objectives/Hypothesis To apply ergonomic principles in analysis of three different operative positions used in laryngeal microsurgery. Study Design Prospective case-control study. Methods Laryngologists were studied in three different microlaryngeal operative positions: a supported position in a chair with articulated arm supports, a supported position with arms resting on a Mayo stand, and a position with arms unsupported. Operative positions were uniformly photographed in three dimensions. Full body postural data was collected and analyzed using the validated Rapid Upper Limb Assessment (RULA) tool to calculate a risk score indicative of potential musculoskeletal misuse in each position. Joint forces were calculated for the neck and shoulder, and compression forces were calculated for the L5/S1 disc space. Results Higher-risk postures were obtained with unfavorably adjusted eyepieces and lack of any arm support during microlaryngeal surgery. Support with a Mayo stand led to more neck flexion and strain. Using a chair with articulated arm supports leads to decreased neck strain, less shoulder torque, and decreased compressive forces on the L5/S1 disc space. Ideal postures during microlaryngoscopy place the surgeon with arms and feet supported, with shoulders in an unraised, neutral anatomic position, upper arms neutrally positioned 20° to 45° from torso, lower arms neutrally positioned 60° to 100° from torso, and wrists extended or flexed postures and repetitive stress injury may lead to reduced occupationally related musculoskeletal pain and may improve microsurgical motor control. Laryngoscope, 2010 PMID:19950376

Ergonomics and sustainable development in the past two decades (1992-2011): Research trends and how ergonomics can contribute to sustainable development.

Science.gov (United States)

Radjiyev, Ayubkhon; Qiu, Hai; Xiong, Shuping; Nam, KyungHyun

2015-01-01

The need for sustainable development has been widely recognized and sustainable development has become a hot topic of various disciplines even though the role of ergonomics in it is seldom reported or considered. This study conducts a systematic survey of research publications in the fields of ergonomics and sustainable development over the past two decades (1992-2011), in order to identify their research trends and convergent areas where ergonomics can play an important role in sustainable development. The results show that 'methods and techniques', 'human characteristics', 'work design and organization', 'health and safety' and 'workplace and equipment design' are the top five frequently researched areas in ergonomics. Ergonomics has an opportunity to contribute its knowledge especially to 'industrial and product design', 'architecture', 'health and safety' and 'HCI' (especially for energy reduction issues) categories of sustainable development. Typical methodologies and general guidance on how to contribute the expertise of ergonomist to sustainable development are also discussed. Copyright © 2014 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Towards a better mastery of risks in the handling of nuclear fuel: the contributions of ergonomics

International Nuclear Information System (INIS)

Samson, L.

1999-01-01

Nuclear fuel is handled under water in the reactor pool using procedures that have yet to be automated. The knowledge and skill of the operators is therefore of prime importance. Ergonomic consultants have prepared a report on the problems facing the operators when handling nuclear fuel? These problems have been addressed by the installation of a new system to detect and prevent incorrect operator commands and to provide software assistance in planning movements together with diagnostic functions. The new system has resulted in considerable time savings and a reduction in the risk of error. However, it has been necessary to modify the control software in the light of the handling strategies traditionally used by the operators. (author)

Perceived competence in computer use as a moderator of musculoskeletal strain in VDU work: an ergonomics intervention case.

Science.gov (United States)

Tuomivaara, S; Ketola, R; Huuhtanen, P; Toivonen, R

2008-02-01

Musculoskeletal strain and other symptoms are common in visual display unit (VDU) work. Psychosocial factors are closely related to the outcome and experience of musculoskeletal strain. The user-computer relationship from the viewpoint of the quality of perceived competence in computer use was assessed as a psychosocial stress indicator. It was assumed that the perceived competence in computer use moderates the experience of musculoskeletal strain and the success of the ergonomics intervention. The participants (n = 124, female 58%, male 42%) worked with VDU for more than 4 h per week. They took part in an ergonomics intervention and were allocated into three groups: intensive; education; and reference group. Musculoskeletal strain, the level of ergonomics of the workstation assessed by the experts in ergonomics and amount of VDU work were estimated at the baseline and at the 10-month follow-up. Age, gender and the perceived competence in computer use were assessed at the baseline. The perceived competence in computer use predicted strain in the upper and the lower part of the body at the follow-up. The interaction effect shows that the intensive ergonomics intervention procedure was the most effective among participants with high perceived competence. The interpretation of the results was that an anxiety-provoking and stressful user-computer relationship prevented the participants from being motivated and from learning in the ergonomics intervention. In the intervention it is important to increase the computer competence along with the improvements of physical workstation and work organization.

How can ergonomic practitioners learn to practice a macro-ergonomic framework developed in academia?

DEFF Research Database (Denmark)

Broberg, Ole; Seim, Rikke; Andersen, Vibeke

2009-01-01

How can a macro-ergonomic framework developed in academia be “transferred” to ergonomic practitioners and become a new work practice? The purpose of this paper is to reflect upon experiences from an interactive research program in which this transferral was tested by two consecutive approaches......” with the researchers and other practitioners; 3) paying attention to the organizational settings of the ergonomic practitioner to make sure that a new work practice is implemented in the organization and not only by a single practitioner....... and interpretation of results when applying the new concept to a real case in a company; 2) the concept is introduced to practitioners, after which they try to practice the concept in a normal consultancy situation, and afterwards have the opportunity to reflect upon their experiences in a “learning space...

The charge of ergonomics--a model according to the influence of ergonomic workplace design for economical and efficient indicators of the automotive industry.

Science.gov (United States)

Neubert, Nicole; Bruder, Ralph; Toledo, Begoña

2012-01-01

The importance of ergonomic workplace design has been rising incredibly. The knowledge of the interaction with a view to many indicators (e.g. operators' health, quality, productivity etc.) in the automotive assembly shop pushed into another thinking of ergonomics and an increasing awareness of economic possibilities relating to benefits and cost savings aligned with ergonomics. The paper discusses exemplary the various indicators and factors which could be influenced by ergonomic workplace design. These factors are linked each other and support the statement of ergonomic efficiency. Thus, the aim of this paper is to present a model which describes that investments in ergonomic work placement acts with preventive measurements, minimization of losses (refinishing operations, compensation money etc.) and extensive economies on the whole company.

Ergonomics and epidemiology in evidence based health prevention

DEFF Research Database (Denmark)

Jensen, Olaf Chresten

2009-01-01

According to the definitions, ergonomics is a natural part of the health and safety activity but it has its own research methods and causal models. Public health, occupational and clinical medicines are closely related to epidemiology and differ from ergonomics by using a disease model with a wide...... success of health effects from the clinical trials could not be obtained. It is argued that the ergonomics design, Integration and Implementation can be strengthened by adapting the epidemiological methods and causal models. The ergonomics can then contribute to a common development of public health...

Ergonomics in laparoscopic surgery

Directory of Open Access Journals (Sweden)

Supe Avinash

2010-01-01

Full Text Available Laparoscopic surgery provides patients with less painful surgery but is more demanding for the surgeon. The increased technological complexity and sometimes poorly adapted equipment have led to increased complaints of surgeon fatigue and discomfort during laparoscopic surgery. Ergonomic integration and suitable laparoscopic operating room environment are essential to improve efficiency, safety, and comfort for the operating team. Understanding ergonomics can not only make life of surgeon comfortable in the operating room but also reduce physical strains on surgeon.

Ergonomic design for dental offices.

Science.gov (United States)

Ahearn, David J; Sanders, Martha J; Turcotte, Claudia

2010-01-01

The increasing complexity of the dental office environment influences productivity and workflow for dental clinicians. Advances in technology, and with it the range of products needed to provide services, have led to sprawl in operatory setups and the potential for awkward postures for dental clinicians during the delivery of oral health services. Although ergonomics often addresses the prevention of musculoskeletal disorders for specific populations of workers, concepts of workflow and productivity are integral to improved practice in work environments. This article provides suggestions for improving workflow and productivity for dental clinicians. The article applies ergonomic principles to dental practice issues such as equipment and supply management, office design, and workflow management. Implications for improved ergonomic processes and future research are explored.

Ergonomic Analysis of Garment Industry using Posture Evaluation Index (PEI) in Virtual Environment

OpenAIRE

Erlinda Muslim; Boy Nurtjahyo; Romadhani Ardi

2011-01-01

This research tried to study, in a virtual environment, the ergonomics of four divisions in garment industry: cutting division, sewing division, button division, and finishing division. Variables that influence the working conditions in each division are different; depend on the real situations that happened. The purpose is to assess the real working conditions based on ergonomics  study  using Posture Evaluation Index (PEI). PEI integrates  the scores of  low back analysi...

Ergonomic intervention: its effect on working posture and musculoskeletal symptoms in female biomedical scientists.

LENUS (Irish Health Repository)

Kilroy, N

2000-01-01

This study investigates the effect of ergonomic intervention on working posture and musculoskeletal symptoms in female biomedical scientists. The Nordic musculoskeletal questionnaire (NMQ), body discomfort chart (BDC) and rapid upper-limb assessment (RULA) are the tools for assessment. The study was conducted in three phases: pre-intervention, intervention and post-intervention. Pre-intervention, 79% of subjects reported a three-month prevalence of symptoms, and these were reported more frequently by those working in haematology\\/transfusion. Analysis by RULA showed that the majority (59%) of postures had a grand score of four. A further 24% had scores of five or six. The highest frequency of poor postures was seen in haematology\\/transfusion. Intervention comprised physical workplace changes, a seminar, and advice on risk factors. In the post-intervention phase, baseline measurements were repeated. Reporting of three-month prevalence of symptoms had decreased to 54%, and reports of body discomfort also had decreased. The majority (64%) had a RULA grand score of three. No observed postures had scores of five or six. In conclusion, ergonomic intervention resulted in an improvement in working postures, and a decrease in the prevalence of musculoskeletal symptoms and body discomfort. Analysis of findings indicate that RULA scores generally corresponded with reporting of symptoms (NMQ) and discomfort (BDC).

How compatible are participatory ergonomics programs with occupational health and safety management systems?

Science.gov (United States)

Yazdani, Amin; Neumann, W Patrick; Imbeau, Daniel; Bigelow, Philip; Pagell, Mark; Theberge, Nancy; Hilbrecht, Margo; Wells, Richard

2015-03-01

Musculoskeletal disorders (MSD) are a major cause of pain, disability, and costs. Prevention of MSD at work is frequently described in terms of implementing an ergonomics program, often a participatory ergonomics (PE) program. Most other workplace injury prevention activities take place under the umbrella of a formal or informal occupational health and safety management system (OHSMS). This study assesses the similarities and differences between OHSMS and PE as such knowledge could help improve MSD prevention activities. Methods Using the internationally recognized Occupational Health and Safety Assessment Series (OHSAS 18001), 21 OHSMS elements were extracted. In order to define PE operationally, we identified the 20 most frequently cited papers on PE and extracted content relevant to each of the OHSAS 18001 elements. The PE literature provided a substantial amount of detail on five elements: (i) hazard identification, risk assessment and determining controls; (ii) resources, roles, responsibility, accountability, and authority; (iii) competence, training and awareness; (iv) participation and consultation; and (v) performance measurement and monitoring. However, of the 21 OHSAS elements, the PE literature was silent on 8 and provided few details on 8 others. The PE literature did not speak to many elements described in OHSMS and even when it did, the language used was often different. This may negatively affect the effectiveness and sustainability of PE initiatives within organizations. It is expected that paying attention to the approaches and language used in management system frameworks could make prevention of MSD activities more effective and sustainable.

Physical Ergonomics and Musculoskeletal Disorders: What's hot? What's cool?

NARCIS (Netherlands)

Beek, A.J. van der; IJmker, S.

2007-01-01

This chapter discusses the physical ergonomics and musculoskeletal disorders and summarizes the Triennial International Ergonomics Association (IEA) World Congress 2006-IEA2006-highlights on physical ergonomics and work-related MusculoSkeletal Disorders (MSDs). Two general trends are observed.

Reducing musculoskeletal disorders among computer operators: comparison between ergonomics interventions at the workplace.

Science.gov (United States)

Levanon, Yafa; Gefen, Amit; Lerman, Yehuda; Givon, Uri; Ratzon, Navah Z

2012-01-01

Typing is associated with musculoskeletal disorders (MSDs) caused by multiple risk factors. This control study aimed to evaluate the efficacy of a workplace intervention for reducing MSDs among computer workers. Sixty-six subjects with and without MSD were assigned consecutively to one of three groups: ergonomics intervention (work site and body posture adjustments, muscle activity training and exercises) accompanied with biofeedback training, the same ergonomics intervention without biofeedback and a control group. Evaluation of MSDs, body posture, psychosocial status, upper extremity (UE) kinematics and muscle surface electromyography were carried out before and after the intervention in the workplace and the motion lab. Our main hypothesis that significant differences in the reduction of MSDs will exist between subjects in the study groups and controls was confirmed (χ(2) = 13.3; p = 0.001). Significant changes were found in UE kinematics and posture as well. Both ergonomics interventions effectively reduced MSD and improved body posture. This study aimed to test the efficacy of an individual workplace intervention programme among computer workers by evaluating musculoskeletal disorders (MSDs), body posture, upper extremity kinematics, muscle activity and psychosocial factors were tested. The proposed ergonomics interventions effectively reduced MSDs and improved body posture.

ENSURING THE ERGONOMIC PRINCIPLES OF SAFETY OF MACHINISTS’ ACTIVITY

Directory of Open Access Journals (Sweden)

Tuskaeva Zalina Ruslanovna

2016-06-01

Full Text Available The problem of increasing the efficiency of the use of road construction machinery and the creation of the conditions for safe operation of machinists requires a comprehensive assessment of the production environment, taking into account the requirements of ergonomics. the results of scientific research in the field of mechanical engineering do not provide a general solution to the problem in the system “machine operator-machine-environment”, although the works of many scientists and scientists-operatives are devoted to the assessment of road-building machinery. unfortunately, the results of many authors are not still enough to comprehensively assess the working environment of operators. and in terms of construction, which supposes complex production and technical facilities, this problem becomes more acute. the main goal of ergonomics is to provide scientific management of labor, and the main task is the development of a productive, comfortable and effective human activity in the conditions of modern production. as a part of the entire national economy it can provide tangible economic benefits.

Strategies and arguments of ergonomic design for sustainability.

Science.gov (United States)

Marano, Antonio; Di Bucchianico, Giuseppe; Rossi, Emilio

2012-01-01

Referring to the discussion recently promoted by the Sub-Technical Committee n°4 "Ergonomics and design for sustainability", in this paper will be shown the early results of a theoretical and methodological study on Ergonomic design for sustainability. In particular, the research is based on the comparison between the common thematic structure characterizing Ergonomics, with the principles of Sustainable Development and with criteria adopted from other disciplines already oriented toward Sustainability. The paper identifies an early logical-interpretative model and describes possible and relevant Strategies of Ergonomic design for sustainability, which are connected in a series of specific Sustainable Arguments.

State of Science: ergonomics and global issues.

Science.gov (United States)

Thatcher, Andrew; Waterson, Patrick; Todd, Andrew; Moray, Neville

2018-02-01

In his 1993 IEA keynote address, Neville Moray urged the ergonomics discipline to face up to the global problems facing humanity and consider how ergonomics might help find some of the solutions. In this State of Science article we critically evaluate what the ergonomics discipline has achieved in the last two and a half decades to help create a secure future for humanity. Moray's challenges for ergonomics included deriving a value structure that moves us beyond a Westernised view of worker-organisation-technology fit, taking a multidisciplinary approach which engages with other social and biological sciences, considering the gross cross-cultural factors that determine how different societies function, paying more attention to mindful consumption, and embracing the complexity of our interconnected world. This article takes a socio-historical approach by considering the factors that influence what has been achieved since Moray's keynote address. We conclude with our own set of predictions for the future and priorities for addressing the challenges that we are likely to face. Practitioner Summary: We critically reflect on what has been achieved by the ergonomics profession in addressing the global challenges raised by Moray's 1993 keynote address to the International Ergonomics Association. Apart from healthcare, the response has largely been weak and disorganised. We make suggestions for priority research and practice that is required to facilitate a sustainable future for humanity.

Ergonomics: safe patient handling and mobility.

Science.gov (United States)

Hallmark, Beth; Mechan, Patricia; Shores, Lynne

2015-03-01

This article reviews and investigates the issues surrounding ergonomics, with a specific focus on safe patient handling and mobility. The health care worker of today faces many challenges, one of which is related to the safety of patients. Safe patient handling and mobility is on the forefront of the movement to improve patient safety. This article reviews the risks associated with patient handling and mobility, and informs the reader of current evidence-based practice relevant to this area of care. Copyright © 2015 Elsevier Inc. All rights reserved.

Proceedings from the 2001 NASA Occupational Health Conference: Risk Assessment and Management in 2001

Science.gov (United States)

Roberson, Sheri (Editor); Kelly, Bruce (Editor); Gettleman, Alan G. (Technical Monitor)

2001-01-01

This Conference convened approximately 86 registered participants of invited guest speakers, NASA presenters, and a broad spectrum of the Occupational Health disciplines representing NASA Headquarters and all NASA Field Centers. Two days' Professional Development Courses on Exposure Assessment Strategies and Statistics and on Advanced Cardiac Life Support training and recertification preceded the Conference. With the theme, 'Risk Assessment and Management in 2001,' conferees were first provided updates from the Program Principal Center Office and the Headquarters Office. Plenary sessions elaborated on several topics: biological terrorism, OSHA recordability, Workers' Compensation issues, Federal ergonomic standards, bridging aerospace medicine and occupational health-especially in management of risk in spaceflight, and EAP operations with mission failures. A keynote address dealt with resiliency skills for 21st century workers and two NASA astronaut speakers highlighted a tour of the Johnson Space Center. During discipline specific breakout sessions, current issues in occupational health management and policy, credentialing and privileging, health risk assessment, measurement and standardization, audits, database development, prevention and rehabilitation, international travel and infection control, employee assistance, nursing process, and environmental health were presented.

Ergonomic measures in construction work: enhancing evidence-based implementation

NARCIS (Netherlands)

Visser, S.

2015-01-01

Despite the development and availability of ergonomic measures in the construction industry, the number of construction workers reporting high physical work demands remains high. A reduction of the high physical work demands can be achieved by using ergonomic measures. However, these ergonomic

Integrating ergonomic knowledge into engineering design processes

DEFF Research Database (Denmark)

Hall-Andersen, Lene Bjerg

Integrating ergonomic knowledge into engineering design processes has been shown to contribute to healthy and effective designs of workplaces. However, it is also well-recognized that, in practice, ergonomists often have difficulties gaining access to and impacting engineering design processes...... employed in the same company, constituted a supporting factor for the possibilities to integrate ergonomic knowledge into the engineering design processes. However, the integration activities remained discrete and only happened in some of the design projects. A major barrier was related to the business...... to the ergonomic ambitions of the clients. The ergonomists’ ability to navigate, act strategically, and compromise on ergonomic inputs is also important in relation to having an impact in the engineering design processes. Familiarity with the engineering design terminology and the setup of design projects seems...

Work-related musculoskeletal disorders and ergonomic risk factors in special education teachers and teacher's aides.

Science.gov (United States)

Cheng, Hsin-Yi Kathy; Wong, Man-Ting; Yu, Yu-Chung; Ju, Yan-Ying

2016-02-10

Work-related musculoskeletal disorders (WMSDs) have become increasingly common among health-related professionals. Special education personnel who serve students with disabilities often experience physical strains; however, WMSDs have been overlooked in this population. The objectives of this study were to investigate the work-related ergonomics-associated factors in this population and to evaluate their correlation with the WMSDs prevalence. A questionnaire with three domains, namely demographics, prevalence of work-related musculoskeletal disorders, and ergonomic factors, designed by our research team was delivered to educators who work in special education schools. Approximately 86 % of the 388 special education school teachers and teacher's aides in this study experienced musculoskeletal disorders. The lower back, shoulder, and wrist were the three most affected regions. A logistic regression analysis revealed that the participants' background factors, namely >5.5 years of experience (odds ratio [OR] = 4.090, 95 % CI: 1.350-12.390), students with multiple disorders (OR = 2.412, 95 % CI: 1.100-5.287), and other work-related ergonomic factors (assistance in diaper changing and others duties), were strongly associated with the prevalence of WMSD. Nap habit (OR = 0.442, 95 % CI: 0.230-0.851) and having teaching partners in the same class (OR = 0.486, 95 % CI: 0.250-0.945) resulted in low possibility of acquiring WMSDs. The use of supportive devices was associated with a low WMSD prevalence. The present study revealed an association between WMSDs and specific job features among teachers and teacher's aides in special education schools. Future efforts should emphasize examining safe student-handling ergonomics, formulating policies regarding student-teacher ratio, incorporating mandatory break times at the workplaces, and promoting personal health for preventing work-related injuries.

An ergonomic task analysis of spinal anaesthesia.

LENUS (Irish Health Repository)

Ajmal, Muhammad

2009-12-01

Ergonomics is the study of physical interaction between humans and their working environment. The objective of this study was to characterize the performance of spinal anaesthesia in an acute hospital setting, applying ergonomic task analysis.

Following ergonomics guidelines decreases physical and cardiovascular workload during cleaning tasks.

Science.gov (United States)

Samani, Afshin; Holtermann, Andreas; Søgaard, Karen; Holtermann, Andreas; Madeleine, Pascal

2012-01-01

The aim was to investigate the effect of ergonomics guidelines on muscular activity, postural and cardiovascular load during cleaning. Eighteen cleaners performed 10 min of cleaning tasks in two locations; three min in a laboratory and seven min in a lecture room. All participants performed the task with or without focusing on ergonomics guidelines (ergonomics/non-ergonomics session). Bipolar surface electromyography was recorded bilaterally from upper trapezius and erector spinae muscles. A tri-axial accelerometer package was mounted on the low back (L5-S1) to measure postural changes, and the cardiovascular load was estimated by electrocardiogram. Ergonomics sessions resulted in lower muscular load, a more complex pattern of muscular activity, lower range of motion and angular velocity of the trunk as well as lower cardiovascular load compared with non-ergonomics sessions (p ergonomics guidelines during cleaning tasks. This study investigated the effects of following instructive ergonomics guidelines during cleaning tasks (daily curriculum of cleaning including mopping, sweeping, changing trash bins and cleaning of desks and blackboards). Following the ergonomics guidelines reduces the general workload and induces a more complex pattern of muscular activity. The study contributes with novel knowledge concerning ergonomics guidelines and work techniques.

Effects of participatory ergonomic intervention on the development of upper extremity musculoskeletal disorders and disability in office employees using a computer

Science.gov (United States)

Baydur, Hakan; Ergör, Alp; Demiral, Yücel; Akalın, Elif

2016-01-01

Objective: To evaluate the participatory ergonomic method on the development of upper extremity musculoskeletal disorders and disability in office employees. Methods: This study is a randomized controlled intervention study. It comprised 116 office workers using computers. Those in the intervention group were taught office ergonomics and the risk assessment method. Cox proportional hazards model and generalized estimating equations (GEEs) were used. Results: In the 10-month postintervention follow-up, the possibility of developing symptoms was 50.9%. According to multivariate analysis results, the possibility of developing symptoms on the right side of the neck and in the right wrist and hand was significantly less in the intervention group than in the control group (pergonomic intervention decreases the possibility of musculoskeletal complaints and disability/symptom level in office workers. PMID:27108647

Effect of working characteristics and taught ergonomics on the prevalence of musculoskeletal disorders amongst dental students

Science.gov (United States)

2013-01-01

Background Work-related musculoskeletal disorders are one of the main occupational health hazards affecting dental practitioners. This study was conducted to assess the prevalence of Work-related Musculoskeletal Disorder (WMSD) amongst dental students. Possible correlations with the working environment and ergonomics taught in Malaysian dental schools were also sought. Methods Five dental schools in Malaysia participated in this cross-sectional study. A validated self-administered questionnaire was used to establish the point prevalence of WMSD in the dental students based on various body regions. The questionnaire also collected data regarding the working environment, clinical practice and the taught ergonomics of the students during their training years. Results Out of five hundred and sixty eight dental students who participated in the study, 410 were in their clinical years whilst 158 were students in their non- clinical years. Ninety three percent of the clinical year students reported symptoms of WMSD in one or more body regions. Female students reported a significantly higher numbers of symptoms compared to male students. The neck (82%) and lower back (64%) were reported to have the highest prevalence of WMSD. Discomfort in the neck region was found to be associated with self-reported frequency of bending of the neck. A majority of students (92%) reported minimum participation in workshops related to ergonomics in dentistry and 77% were unfamiliar with treatment and remedies available in the case of WMSD. Conclusions There was more WMSD seen in dental students who had started their clinical years. Neck and lower back are more injury prone areas and are at increased risk of developing musculoskeletal disorders. Theory and practice of ergonomics should be incorporated into the dental undergraduate curriculum. PMID:23547959

The ergonomics approach for thin film transistor-liquid crystal display manufacturing process.

Science.gov (United States)

Lu, Chih-Wei; Yao, Chia-Chun; Kuo, Chein-Wen

2012-01-01

The thin film transistor-liquid crystal display (TFT-LCD) has been used all over the world. Although the manufacture process of TFT-LCD was highly automated, employees are hired to do manual job in module assembly process. The operators may have high risk of musculoskeletal disorders because of the long work hours and the repetitive activities in an unfitted work station. The tools of this study were questionnaire, checklist and to evaluate the work place design. The result shows that the participants reported high musculoskeletal disorder symptoms in shoulder (59.8%), neck (49.5%), wrist (39.5%), and upper back (30.6%). And, to reduce the ergonomic risk factors, revising the height of the work benches, chairs and redesigning the truck to decrease the chance of unsuitable positions were recommended and to reduce other ergonomics hazards and seta good human machine interface and appropriate job design.

Can participatory ergonomics become 'the way we do things in this firm' - the Scandinavian approach to participatory ergonomics

DEFF Research Database (Denmark)

Jensen, Per Langaa

1997-01-01

Under the label 'participatory ergonomics' the idea of establishing changes in working conditions through participatory approaches has been a central issue within ergonomics. Tools and procedures have been developed and demonstrated beneficial. But how this approach can be established as the way...

A brief essay on ergonomics in graphic design.

Science.gov (United States)

Mendonça, André N F; van der Linden, Júlio C S; Fonseca, Tania M G

2012-01-01

Through Brazilian publication revision on the relations amongst Ergonomics and Design, we observed the tendency towards an approach focusing on product design. However, it is our duty to question which would be the influences of ergonomics in the graphic design. As a methodology, we considered the identification that the practices derived from ergonomics as epistemic system found in the main bibliography related to graphic design.

Mobile work: Ergonomics in a rapidly changing work environment.

Science.gov (United States)

Honan, Meg

2015-01-01

Places of work have been completely transformed by innovations in mobile work tools and ever-present access to internet data. This article characterizes use patterns and provides preliminary considerations for productive and comfortable use of common mobile devices. Two surveys described trends in mobile work. In the first, ergonomics professionals who oversee programs reported common mobile devices, their users and what data is accessed. The second, an end user survey, explored common activities performed on mobile devices, duration of use and locations where mobile work is common. The survey results provide a baseline data point for the status of mobile work in early 2014. Research indicates that additional risks have been introduced to the neck, thumbs and hands when using mobile devices. Possible trends regarding device use and work locations emerge. Intervention studies provide some direction for the practitioner. Practical strategies are outlined to reduce exposure intensity and duration. Contemporary mobile work presents tremendous change and opportunity for ergonomists and researchers to keep pace with fitting the changing models of work to the person. Continued research is needed on current mobile device use patterns to better understand ergonomic risk exposure in this rapidly changing realm.

Poor sitting posture and a heavy schoolbag as contributors to musculoskeletal pain in children: an ergonomic school education intervention program

Directory of Open Access Journals (Sweden)

Syazwan AI

2011-09-01

Full Text Available AI Syazwan1, MN Mohamad Azhar1, AR Anita1, HS Azizan1, MS Shaharuddin2, J Muhamad Hanafiah3, AA Muhaimin4, AM Nizar5, B Mohd Rafee1,6, A Mohd Ibthisham7, Adam Kasani71Environmental and Occupational Medicine Unit, Department of Community Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 2Environmental and Occupational Health Unit, Department of Community Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 3Health Services Management Unit, Department of Community Health, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 4Department of Environmental Management, Faculty of Environmental Studies, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 5Pharmacology Unit, Department of Human Anatomy, Faculty of Medicine and Health Sciences, Universiti Putra Malaysia, Serdang, Selangor, Malaysia; 6Ergonomic Division, National Institute of Occupational Safety and Health Bangi, Selangor, Malaysia; 7Department of Mechanical Engineering, Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, Skudai, Johor, MalaysiaObjectives: The purpose of this study was to evaluate a multidisciplinary, interventional, ergonomic education program designed to reduce the risk of musculoskeletal problems by reducing schoolbag weight and correcting poor sitting posture.Methods: Data were collected twice before and twice following intervention using the Standardized Nordic Body Map Questionnaire, a rapid upper limb assessment for posture evaluation, and schoolbag weight measurement in children aged 8 and 11 years attending two schools within the central region of Malaysia.Results: Students who received the ergonomic intervention reported significant improvements in their sitting posture in a classroom environment and reduction of schoolbag weight as compared with the controls.Conclusion: A single-session, early

Evaluating the Ergonomics of Flexible Ureteroscopy.

Science.gov (United States)

Ludwig, Wesley W; Lee, Gyusung; Ziemba, Justin B; Ko, Joan S; Matlaga, Brian R

2017-10-01

To date, the ergonomics of flexible ureteroscopy (URS) have not been well described. We performed a study to assess the biomechanical stresses on urologists performing URS and to investigate the effect of ureteroscope type on these parameters. Electromyography (EMG) was used to quantify the activation level of muscle groups involved in URS. Surface EMG electrodes (Delsys, Boston, MA) were placed on the right and left thenar, flexor carpi ulnaris (FCU), extensor carpi ulnaris (ECU), biceps, triceps, and deltoid. Three endoscopes were studied: single-use digital (Boston Scientific LithoVue), reusable digital (Karl Storz Flex-X c ), and reusable fiber-optic (Karl Storz Flex-X 2 ). Each ureteroscope was used to perform a set sequence of navigation and procedural tasks in a training model. EMG data were processed and normalized to compare the maximum voluntary contractions between muscle groups. Cumulative muscular workload (CMW) and average muscular work per second (AWS) were used for comparative analysis. For navigational tasks, CMW and AWS were greatest for the ECU, followed in descending order by right and left thenar, FCU, biceps, deltoid, and triceps. For procedural tasks, CMW and AWS were greatest for the right thenar, followed in descending order by the left thenar, ECU, FCU, triceps, biceps, and deltoid. During navigational tasks, both LithoVue and Flex-X c had lower CMWs for every muscle group than Flex-X 2 (p ergonomics of URS. Both the single-use and reusable digital ureteroscopes have similar profiles, and both have significantly better ergonomic metrics than the reusable fiber-optic ureteroscope.

Trapezius Muscle Activity in using Ordinary and Ergonomically Designed Dentistry Chairs

Directory of Open Access Journals (Sweden)

O Haddad

2012-03-01

Full Text Available Background: Most dentists complain of musculoskeletal disorders which can be caused by prolonged static posture, lack of suitable rest and other physical and psychological problems. Objective: We evaluated a chair with a new ergonomic design which incorporated forward leaning chest and arm supports. Methods: The chair was evaluated in the laboratory during task simulation and EMG analysis on 12 students and subjectively assessed by 30 professional dentists using an 18-item questionnaire. EMG activity of right and left trapezius muscles for 12 male students with no musculoskeletal disorders was measured while simulating common tasks like working on the teeth of the lower jaw. Results: Normalized EMG data showed significant reduction (p<0.05 in all EMG recordings of the trapezius muscle. Dentists also unanimously preferred the ergonomically designed chair. Conclusion: Such ergonomically designed chairs should be introduced as early as possible in student training before bad postural habits are acquired.

Fundamentals of ergonomic exoskeleton robots

OpenAIRE

Schiele, A.

2008-01-01

This thesis is the first to provide the fundamentals of ergonomic exoskeleton design. The fundamental theory as well as technology necessary to analyze and develop ergonomic wearable robots interacting with humans is established and validated by experiments and prototypes. The fundamentals are (1) a new theoretical framework for analyzing physical human robot interaction (pHRI) with exoskeletons, and (2) a clear set of design rules of how to build wearable, portable exoskeletons to easily and...

Ergonomic Improvements for Foundries; FINAL

International Nuclear Information System (INIS)

Frank Peters; Patrick Patterson

2002-01-01

The goal of this project was to make improvements to the production systems of the steel casting industry through ergonomic improvements. Because of the wide variety of products, the wide range of product sizes, and the relatively small quantities of any particular product, manual operations remain a vital part of the production systems of the steel casting companies. Ergonomic improvements will assist the operators to more efficiently and consistently produce quality products

Avoid Workplace Injury through Ergonomics | Poster

Science.gov (United States)

Ergonomics is “the scientific study of people at work,” with the goal of reducing stress and eliminating injuries associated with overused muscles, bad posture, and repeated tasks, according to the Centers for Disease Control and Prevention (CDC). The Occupational Safety and Health Administration (OSHA) states that working ergonomically reduces muscle fatigue, increases

The effects of office ergonomic training on musculoskeletal complaints, sickness absence, and psychological well-being: a cluster randomized control trial.

Science.gov (United States)

Mahmud, Norashikin; Kenny, Dianna T; Md Zein, Raemy; Hassan, Siti Nurani

2015-03-01

This study explored whether musculoskeletal complaints can be reduced by the provision of ergonomics education. A cluster randomized controlled trial study was conducted in which 3 units were randomized to intervention and received training and 3 units were given a leaflet. The effect of intervention on knowledge, workstation practices, musculoskeletal complaints, sickness absence, and psychological well-being were assessed at 6 and 12 months. Although there was no increment of knowledge among workers, significant improvements in workstation practices in the use of monitor, keyboard, and chair were observed. There were significant reductions in neck and upper and lower back complaints among workers but these did not translate into fewer days lost from work. Workers' stress was found to be significantly reduced across the studies. In conclusion, office ergonomics training can be beneficial in reducing musculoskeletal risks and stress among workers. © 2011 APJPH.

Ergonomics evaluation of a government office building.

Science.gov (United States)

Pentikis, John; Lopez, Mary S; Thomas, Robert E

2002-01-01

An ergonomics team from the US Army Center for Health Promotion and Preventive medicine evaluated 465 video display terminal (VDT) workstations in a Government office building over an 18-day period. Each workstation evaluation involved an assessment of the worker, the chair, the desk, the keyboard, the pointing device, the monitor, and the office environmental conditions. The team also collected worker pain and injury information. The problems seen during the evaluation were characteristic of most office environments where VDT workstation furniture was purchased before the advent of mouse-driven software. The majority of furniture evaluated was not designed to meet the demands of intensive mouse use for prolonged periods of time. Much of the workstation furniture was not adjustable, chairs lacked adequate back support, and workers assumed non-neutral postures. As a result, more than 35% of the workers evaluated complained of on-the-job pain. New office furniture that is adjustable, adequate desk space and storage space were among the solutions recommended by the ergonomics team.

Ergonomic assessment of brake and accelerator mechanisms of MF285 and MF399 tractors using electromyography method

Directory of Open Access Journals (Sweden)

A Nikkhah

2016-04-01

Full Text Available Introduction: Too many people are working in the agricultural sector and therefore, pay more attention to the safety and health at work in the agricultural sector is important. This issue is more important in developing industrial countries where the level of the ergonomic working condition is less than that of developed countries. Attention to ergonomic condition of agricultural machinery drivers is one of the goals of agricultural mechanization. Therefore, in this study the ergonomic conditions of brake and accelerator mechanisms for MF285 and MF399 tractor's drivers were investigated using a new method. Materials and Methods: 25 people were selected for experiment. The electrical activity of Medialis gastrocnemius, Lateralis gastrocnemius, Vastus medialis, Vastus lateralis, Quadratus Lumborum and Trapezius muscles of drivers before and during pressing the pedal and after rest time were recorded using Biovision device. Measurements were performed for each person on each muscle 30 seconds before pressing the pedal, 60 seconds after pressing the pedal and after 60 seconds of rest. For all drivers, the muscles on the right side (brake and accelerator side have been selected and tested. The measurements were performed in compliance with appropriate time intervals between the measurements. Results and Discussion: Ergonomic assessment of brake pedal: The results showed that the RMS electrical activity of muscles of Vastus medialis and Medial gastrocnemius, during 60 seconds braking were 2.47 and 1.97. So, Vastus medialis and Medial gastrocnemius had the highest stress during pressing the MF399 tractor's brake pedal. Moreover, the Medial gastrocnemius and Lateral gastrocnemius with RMS electrical activity ratio of 2.47 and 1.74 had the highest RMS electrical activity ratio respectively, during 60 seconds braking compared to before braking of MF285 tractor. The comparison of results showed that the Vastus medialis and Trapezius had the higher stress

The dentist’s operating posture – ergonomic aspects

Science.gov (United States)

Pîrvu, C; Pătraşcu, I; Pîrvu, D; Ionescu, C

2014-01-01

Abstract The practice of dentistry involves laborious high finesse dental preparations, precision and control in executions that require a particular attention, concentration and patience of the dentist and finally the dentist’s physical and mental resistance. The optimal therapeutic approach and the success of practice involve special working conditions for the dentist and his team in an ergonomic environment. The meaning of the posture in ergonomics is the manner in which different parts of the body are located and thus the reports are established between them in order to allow a special task execution. This article discusses the posture adopted by dentists when they work, beginning with the balanced posture and going to different variants of posture. The ideal posture of a dentist gives him, on the one hand the optimal working conditions (access, visibility and control in the mouth) and on the other hand, physical and psychological comfort throughout the execution of the clinical acts. Although the theme of dentist posture is treated with great care and often presented in the undergraduate courses and the continuing education courses on ergonomics in dentistry, many dentists do not know the subject well enough nor the theoretical issues and therefore nor the practical applicability. The risk and perspective of the musculoskeletal disorders related to unbalanced postures should determine the dentists take postural corrective actions and compensation measures in order to limit the negative effects of working in a bad posture. PMID:25184007

Ergonomics in thoracoscopic surgery: results of a survey among thoracic surgeons†

Science.gov (United States)

Welcker, Katrin; Kesieme, Emeka B.; Internullo, Eveline; Kranenburg van Koppen, Laura J.C.

2012-01-01

OBJECTIVES The frequent and prolonged use of thoracoscopic equipment raises ergonomic risks which may cause physical distress. We aimed to determine the relationship between ergonomic problems encountered in thoracoscopic surgery and physical distress among thoracic surgeons. METHODS An online questionnaire which investigated personal factors, product factors, interaction factors and physical discomfort was sent to all members of the European Society of Thoracic Surgeons (ESTS). RESULTS Of the respondents, 2.4% indicated that a one arm's length should be the optimal distance between the surgeon and the monitor. Only 2.4% indicated that the monitor should be positioned below the eye level of the surgeon. Most of the respondents agreed, partially to fully, that they experienced neck discomfort because of inappropriate monitor height, bad monitor position and bad table height. Most respondents experienced numb fingers and shoulder discomfort due to instrument manipulation. Most of the respondents (77.1%) experienced muscle fatigue to some extent due to a static posture during thoracoscopic surgery. The majority of respondents (81.9, 76.3 and 83.2% respectively) indicated that they had varying degrees of discomfort mainly in the neck, shoulder and back. Some 94.4% of respondents were unaware of any guidelines concerning table height, monitor and instrument placement for endoscopic surgery. CONCLUSIONS Most thoracic surgeons in Europe are unaware of ergonomic guidelines and do not practise them, hence they suffer varying degrees of physical discomfort arising from ergonomic issues. PMID:22586071

Developing measures for information ergonomics in knowledge work.

Science.gov (United States)

Franssila, Heljä; Okkonen, Jussi; Savolainen, Reijo

2016-03-01

Information ergonomics is an evolving application domain of ergonomics focusing on the management of workload in the real-world contexts of information-intensive tasks. This study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, five key dimensions of information ergonomics were identified: contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity. In total, 24 measures focusing on the above dimensions were constructed. The measures include, for example, the number of fragmented work tasks per work day. The measures were preliminarily tested in two Finnish organisations, making use of empirical data gathered by interviews, electronic questionnaires and log data applications tracking work processes on personal computers. The measures are applicable to the evaluation of information ergonomics, even though individual measures vary with regard to the amount of work and time needed for data analysis. Practitioner Summary: The study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, 24 measures were constructed and tested empirically. The measures focus on contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity.

Initiating an ergonomic analysis. A process for jobs with highly variable tasks.

Science.gov (United States)

Conrad, K M; Lavender, S A; Reichelt, P A; Meyer, F T

2000-09-01

Occupational health nurses play a vital role in addressing ergonomic problems in the workplace. Describing and documenting exposure to ergonomic risk factors is a relatively straightforward process in jobs in which the work is repetitive. In other types of work, the analysis becomes much more challenging because tasks may be repeated infrequently, or at irregular time intervals, or under different environmental and temporal conditions, thereby making it difficult to observe a "representative" sample of the work performed. This article describes a process used to identify highly variable job tasks for ergonomic analyses. The identification of tasks for ergonomic analysis was a two step process involving interviews and a survey of firefighters and paramedics from a consortium of 14 suburban fire departments. The interviews were used to generate a list of frequently performed, physically strenuous job tasks and to capture clear descriptions of those tasks and associated roles. The goals of the survey were to confirm the interview findings across the entire target population and to quantify the frequency and degree of strenuousness of each task. In turn, the quantitative results from the survey were used to prioritize job tasks for simulation. Although this process was used to study firefighters and paramedics, the approach is likely to be suitable for many other types of occupations in which the tasks are highly variable in content and irregular in frequency.

Web-based office ergonomics intervention on work-related complaints: a field study.

Science.gov (United States)

Meinert, Marina; König, Mirjam; Jaschinski, Wolfgang

2013-01-01

The aim of this study was a proof of concept to examine the effects of a Web-based office ergonomics intervention on subjects' individual workplace adjustments. An intervention study was conducted with 24 office workers lasting 6 weeks with three consecutive phases (before, 1 and 5 weeks after the intervention). Employees used a purpose-made website for adjusting their computer workplaces without any personal support of ergonomics experts. Workplace measurements were taken directly on site and by analysing photos taken of the employee. Self-reported complaints were assessed by filling in a questionnaire. It was found that 96% of the employees changed their workplaces on their own and retained them mostly unchanged after the intervention. Furthermore, self-reported musculoskeletal complaints and headache symptoms decreased significantly after the intervention. These findings suggest an improvement of workplace conditions so that cost-effective ergonomic Web-based interventions appear promising in further research and application.

Corporate ergonomics programme at Ford Motor Company.

Science.gov (United States)

Joseph, Bradley S

2003-01-01

The use of ergonomic principles in automobile assembly and manufacturing operations has become an important part of a comprehensive health and safety process as well as an integral part of the engineering systems. Ford Motor Company has developed an ergonomics process to manage issues related to injury and illness (e.g., musculoskeletal diseases) and to ensure the appropriate use of human resources on the plant floor. The ergonomics programme uses joint labour and management teams to identify and evaluate jobs and develop and implement solutions. This paper summarises the efforts of the Ford Motor Company in implementing and maintaining the programme. Key strategies are outlined that provide important links to internal organisational units that are critical to fully utilise the ergonomics process. In addition, the paper outlines differences between proactive and reactive efforts and shows the importance of using the information generated by the initiatives for process improvement.

New procedures of ergonomics design in a large oil company.

Science.gov (United States)

Alhadeff, Cynthia Mossé; Silva, Rosana Fernandes da; Reis, Márcia Sales dos

2012-01-01

This study presents the challenge involved in the negotiation and construction of a standard process in a major petroleum company that has the purpose of guiding the implementation of ergonomic studies in the development of projects, systemising the implementation of ergonomics design. The standard was created by a multi-disciplinary working group consisting of specialists in ergonomics, who work in a number of different areas of the company. The objective was to guide "how to" undertake ergonomics in all projects, taking into consideration the development of the ergonomic appraisals of work. It also established that all the process, in each project phase, should be accompanied by a specialist in ergonomics. This process as an innovation in the conception of projects in this company, signals a change of culture, and, for this reason requires broad dissemination throughout the several company leadership levels, and training of professionals in projects of ergonomics design. An implementation plan was also prepared and approved by the corporate governance, complementing the proposed challenge. In this way, this major oil company will implement new procedures of ergonomics design to promote health, safety, and wellbeing of the workforce, besides improving the performance and reliability of its systems and processes.

Does drywall installers' innovative idea reduce the ergonomic exposures of ceiling installation: A field case study.

Science.gov (United States)

Dasgupta, Priyadarshini Sengupta; Punnett, Laura; Moir, Susan; Kuhn, Sarah; Buchholz, Bryan

2016-07-01

The study was conducted to assess an intervention suggested by the workers to reduce the physical or ergonomic exposures of the drywall installation task. The drywall installers were asked to brainstorm on innovative ideas that could reduce their ergonomic exposures during the drywall installation work. The workers proposed the idea of using a 'deadman' (narrow panel piece) to hold the panels to the ceiling while installing them. The researcher collected quantitative exposure data (PATH, 3DSSPP) at the baseline and intervention phases and compared the phases to find out any change in the exposure while using the 'deadman'. Results showed that ergonomic exposures (such as overhead arm and awkward trunk postures and heavy load handling) were reduced at the intervention phase while using the 'deadman' with an electrically operated lift. The concept of the 'deadman', which was shown to help reduce musculoskeletal exposures during ceiling installation, can be used to fabricate a permanent ergonomic tool to support the ceiling drywall panel. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics and sustainability: towards an embrace of complexity and emergence.

Science.gov (United States)

Dekker, Sidney W A; Hancock, Peter A; Wilkin, Peter

2013-01-01

Technology offers a promising route to a sustainable future, and ergonomics can serve a vital role. The argument of this article is that the lasting success of sustainability initiatives in ergonomics hinges on an examination of ergonomics' own epistemology and ethics. The epistemology of ergonomics is fundamentally empiricist and positivist. This places practical constraints on its ability to address important issues such as sustainability, emergence and complexity. The implicit ethical position of ergonomics is one of neutrality, and its positivist epistemology generally puts value-laden questions outside the parameters of what it sees as scientific practice. We argue, by contrast, that a discipline that deals with both technology and human beings cannot avoid engaging with questions of complexity and emergence and seeking innovative ways of addressing these issues. Ergonomics has largely modelled its research on a reductive science, studying parts and problems to fix. In sustainability efforts, this can lead to mere local adaptations with a negative effect on global sustainability. Ergonomics must consider quality of life globally, appreciating complexity and emergent effects of local relationships.

Ergonomics SA

African Journals Online (AJOL)

Journal Homepage Image. Ergonomics SA (esa) provides a medium for publication of material relevant to occupational conditions and needs in Southern Africa at a time of change unparalleled in history. To this end the journal accepts articles in the following categories: research papers, review articles, conceptual theories, ...

Physical ergonomics

NARCIS (Netherlands)

Looze, M.P. de; Koningsveld, E.

2013-01-01

Physical ergonomics deals with the physical load on the human body when performing activities like work, sports, jobs at home or dealing with products. With regard to the exposure to physical loads and its potential effects on the human body, the presented framework is helpful. In this article we

Ergonomics SA: Contact

African Journals Online (AJOL)

Principal Contact. Mrs June McDougall. Rhodes University. Department of Human Kinetics and Ergonomics. P.O. Box 94. Rhodes University. Grahamstown. 6140. Phone: +27 46 6038471. Email: j.mcdougall@ru.ac.za ...

Ergonomic Analysis of UI’s BicyclesUsing Posture Evaluation Index (PEI Method in Virtual Environment

Directory of Open Access Journals (Sweden)

Erlinda Muslim

2010-10-01

Full Text Available This research was conducted to study ergonomic aspect from University of Indonesia bicycle in virtual environment. Software Jack 6.0 was used to analyze it. PEI was used as approach that integrated the results of three methods: Lower Back Analysis, Ovako Working Posture Analysis, and Rapid Upper Limb Assessment. The research objective is to evaluate existing design of University of Indonesia bicycle and to determine the most ergonomic redesign which concern with handlebar height and saddle height modification. The result showed that the most ergonomic design of University of Indonesia bicycle is the one with the highest handlebar height (22 cm and the lowest saddle height (11 cm.

Work environment and occupational risk assessment for small animal Portuguese veterinary activities.

Science.gov (United States)

Macedo, Angela C; Mota, Vânia T; Tavares, João M; Machado, Osvaldo L; Malcata, Francisco X; Cristo, Marinela P; Mayan, Olga N

2018-03-01

The professional work of small animal veterinary staff encompasses a wide diversity of demanding tasks. This has prompted a number of studies covering physical, chemical, biological, ergonomic, or psychological hazards, as well as their health effects upon veterinary workers. However, such results were obtained from self-reported surveys (via paper or online). This study reports the identification of potential hazards and provides a risk assessment of 15 veterinary clinics based on data from walk-through surveys, interviews with workers, and quantification of indoor air quality parameters including concentration of volatile organic compounds (total, isoflurane, and glutaraldehyde). The risk arising from X-ray exposure was unacceptable in seven clinics; X-ray examination should be discontinued in the absence of isolated radiation rooms, poor safety practices, and lack of personal protective equipment. Ergonomic-related hazards and work practices should be revised as soon as possible, considering that improper postures, as well as moving and lifting heavy animals are major causes of musculoskeletal disorders. The risk levels were, in general, small or medium (acceptable) with regard to exposure to physical hazards (such as bites, scratches, cuts, and burns) and biological hazards. It was observed that the indoor air quality parameters including temperature, respirable particulate matter and total volatile organic compounds do not indicate a comfortable workplace environment, requiring clinics' attention to keep the safe environment. The veterinarians and nurses were exposed to isoflurane (above 2 ppm) during surgery if an extractor system for waste gas was used instead of a scavenging system. Finally, veterinary workers did not possess any type of training on occupational safety and health issues, even though they recognized its importance.

Ergonomic Based Design and Survey of Elementary School Furniture

Science.gov (United States)

Maheshwar; Jawalkar, Chandrashekhar S.

2014-01-01

This paper presents the ergonomic aspects in designing and prototyping of desks cum chairs used in elementary schools. The procedures adopted for the assessment included: the study of existing school furniture, design analysis and development of prototypes. The design approach proposed a series of adjustable desks and chairs developed in terms of…

Applying systems ergonomics methods in sport: A systematic review.

Science.gov (United States)

Hulme, Adam; Thompson, Jason; Plant, Katherine L; Read, Gemma J M; Mclean, Scott; Clacy, Amanda; Salmon, Paul M

2018-04-16

As sports systems become increasingly more complex, competitive, and technology-centric, there is a greater need for systems ergonomics methods to consider the performance, health, and safety of athletes in context with the wider settings in which they operate. Therefore, the purpose of this systematic review was to identify and critically evaluate studies which have applied a systems ergonomics research approach in the context of sports performance and injury management. Five databases (PubMed, Scopus, ScienceDirect, Web of Science, and SPORTDiscus) were searched for the dates 01 January 1990 to 01 August 2017, inclusive, for original peer-reviewed journal articles and conference papers. Reported analyses were underpinned by a recognised systems ergonomics method, and study aims were related to the optimisation of sports performance (e.g. communication, playing style, technique, tactics, or equipment), and/or the management of sports injury (i.e. identification, prevention, or treatment). A total of seven articles were identified. Two articles were focussed on understanding and optimising sports performance, whereas five examined sports injury management. The methods used were the Event Analysis of Systemic Teamwork, Cognitive Work Analysis (the Work Domain Analysis Abstraction Hierarchy), Rasmussen's Risk Management Framework, and the Systems Theoretic Accident Model and Processes method. The individual sport application was distance running, whereas the team sports contexts examined were cycling, football, Australian Football League, and rugby union. The included systems ergonomics applications were highly flexible, covering both amateur and elite sports contexts. The studies were rated as valuable, providing descriptions of injury controls and causation, the factors influencing injury management, the allocation of responsibilities for injury prevention, as well as the factors and their interactions underpinning sports performance. Implications and future

Physical human-robot interaction of an active pelvis orthosis: toward ergonomic assessment of wearable robots.

Science.gov (United States)

d'Elia, Nicolò; Vanetti, Federica; Cempini, Marco; Pasquini, Guido; Parri, Andrea; Rabuffetti, Marco; Ferrarin, Maurizio; Molino Lova, Raffaele; Vitiello, Nicola

2017-04-14

In human-centered robotics, exoskeletons are becoming relevant for addressing needs in the healthcare and industrial domains. Owing to their close interaction with the user, the safety and ergonomics of these systems are critical design features that require systematic evaluation methodologies. Proper transfer of mechanical power requires optimal tuning of the kinematic coupling between the robotic and anatomical joint rotation axes. We present the methods and results of an experimental evaluation of the physical interaction with an active pelvis orthosis (APO). This device was designed to effectively assist in hip flexion-extension during locomotion with a minimum impact on the physiological human kinematics, owing to a set of passive degrees of freedom for self-alignment of the human and robotic hip flexion-extension axes. Five healthy volunteers walked on a treadmill at different speeds without and with the APO under different levels of assistance. The user-APO physical interaction was evaluated in terms of: (i) the deviation of human lower-limb joint kinematics when wearing the APO with respect to the physiological behavior (i.e., without the APO); (ii) relative displacements between the APO orthotic shells and the corresponding body segments; and (iii) the discrepancy between the kinematics of the APO and the wearer's hip joints. The results show: (i) negligible interference of the APO in human kinematics under all the experimented conditions; (ii) small (i.e., ergonomics assessment of wearable robots.

Ergonomics: A bridge between fundamentals and applied research

OpenAIRE

Ghosh, Subrata; Bagchi, Anandi; Sen, Devashish; Bandyopadhyay, Pathikrit

2011-01-01

Ergonomics is becoming a subject of applying fundamentals on anthropocentric dimensions for holistic welfare. The so-called conflict between Basic science and Applied research finds one of its edges in Ergonomics. Be it cutting-edge technology or frontiers of scientific innovation-all start from understanding basic scientific aptitude and skill, and the best way to get familiar with the situation is practicing basic science again and again at a regular basis. Ergonomics is diversified in such...

21st century trucking: A trajectory for ergonomics and road freight.

Science.gov (United States)

Bedinger, M; Walker, G H; Piecyk, M; Greening, P

2016-03-01

Over the past decade there has been significant pressure to minimise emissions and safety risks related to commercial driving. This pressure to meet the triple bottom line of cost, environment, and society has often resulted in the rapid application of vehicle technologies designed to mitigate undesired effects. Often the cognitive and behavioural effects of technologies on the commercial driver have not received in-depth analysis to determine comprehensive viability. As such, this paper aims to identify a timescale for implementation for future technologies for UK road freight, and likely associated human factors issues, improving upon the currently employed 'trial-and-error' approach to implementation which may carry high economic, environmental, safety-related risk. Thought experiments are carried out to broadly explore these future systems. Furthermore, this work aims to examine whether technology alone will be enough to meet future CO2 reduction targets, and assess the role of behavioural and systems interventions for future research. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Ergonomics in the office environment

Science.gov (United States)

Courtney, Theodore K.

1993-01-01

Perhaps the four most popular 'ergonomic' office culprits are: (1) the computer or visual display terminal (VDT); (2) the office chair; (3) the workstation; and (4) other automated equipment such as the facsimile machine, photocopier, etc. Among the ergonomics issues in the office environment are visual fatigue, musculoskeletal disorders, and radiation/electromagnetic (VLF,ELF) field exposure from VDT's. We address each of these in turn and then review some regulatory considerations regarding such stressors in the office and general industrial environment.

Ergonomics in the context of system safety

International Nuclear Information System (INIS)

Donnelly, K.E.

1984-01-01

In a complex industrial environment, ergonomics must be combined with management science and systems analysis to produce a program which can create effective change and improve safety performance. We give an overview of such an approach, namely System Safety, so that its ergonomic content may be seen

Nutra-ergonomics: influence of nutrition on physical employment standards and the health of workers.

Science.gov (United States)

Shearer, Jane; Graham, Terry E; Skinner, Tina L

2016-06-01

The importance of ergonomics across several scientific domains, including biomechanics, psychology, sociology, and physiology, have been extensively explored. However, the role of other factors that may influence the health and productivity of workers, such as nutrition, is generally overlooked. Nutra-ergonomics describes the interface between workers, their work environment, and performance in relation to their nutritional status. It considers nutrition to be an integral part of a safe and productive workplace that encompasses physical and mental health as well as the long-term wellbeing of workers. This review explores the knowledge, awareness, and common practices of nutrition, hydration, stimulants, and fortified product use employed prior to physical employment standards testing and within the workplace. The influence of these nutra-ergonomic strategies on physical employment standards, worker safety, and performance will be examined. Further, the roles, responsibilities, and implications for the applicant, worker, and the employer will be discussed within the context of nutra-ergonomics, with reference to the provision and sustainability of an environment conducive to optimize worker health and wellbeing. Beyond physical employment standards, workplace productivity, and performance, the influence of extended or chronic desynchronization (irregular or shift work) in the work schedule on metabolism and long-term health, including risk of developing chronic and complex diseases, is discussed. Finally, practical nutra-ergonomic strategies and recommendations for the applicant, worker, and employer alike will be provided to enhance the short- and long-term safety, performance, health, and wellbeing of workers.

Office ergonomics: deficiencies in computer workstation design.

Science.gov (United States)

Shikdar, Ashraf A; Al-Kindi, Mahmoud A

2007-01-01

The objective of this research was to study and identify ergonomic deficiencies in computer workstation design in typical offices. Physical measurements and a questionnaire were used to study 40 workstations. Major ergonomic deficiencies were found in physical design and layout of the workstations, employee postures, work practices, and training. The consequences in terms of user health and other problems were significant. Forty-five percent of the employees used nonadjustable chairs, 48% of computers faced windows, 90% of the employees used computers more than 4 hrs/day, 45% of the employees adopted bent and unsupported back postures, and 20% used office tables for computers. Major problems reported were eyestrain (58%), shoulder pain (45%), back pain (43%), arm pain (35%), wrist pain (30%), and neck pain (30%). These results indicated serious ergonomic deficiencies in office computer workstation design, layout, and usage. Strategies to reduce or eliminate ergonomic deficiencies in computer workstation design were suggested.

Participatory ergonomics intervention in an industrially developing country--a case study.

Science.gov (United States)

Helali, Faramarz; Lönnroth, Emma-Christin; Shahnavaz, Houshang

2008-01-01

In industrially developing countries, a few ergonomists have directed great efforts towards developing ergonomics awareness among managers and workers in organizations. There is little research on the degree of their success, though. Furthermore, access of organizations to ergonomics knowledge is usually very difficult, especially in industrially developing countries. Thus, building ergonomics awareness is certainly the first phase of the process. Three companies from one industry (44 people: 14 females and 30 males) participated in a project aimed at improving their work system. At the beginning, we needed to create a common goal and ensure participation with appropriate ergonomics tools. The findings of this study were the key issue for the ergonomics intervention (i.e., a shared vision, awakened need of change and learning). Further, to build ergonomics awareness and develop a continuous learning process in the company, it was necessary to use more ergonomics tools through workers' participation in different workplaces.

Work-related musculoskeletal disorders and ergonomic risk factors in special education teachers and teacher’s aides

Directory of Open Access Journals (Sweden)

Hsin-Yi Kathy Cheng

2016-02-01

Full Text Available Abstract Background Work-related musculoskeletal disorders (WMSDs have become increasingly common among health-related professionals. Special education personnel who serve students with disabilities often experience physical strains; however, WMSDs have been overlooked in this population. The objectives of this study were to investigate the work-related ergonomics-associated factors in this population and to evaluate their correlation with the WMSDs prevalence. Methods A questionnaire with three domains, namely demographics, prevalence of work-related musculoskeletal disorders, and ergonomic factors, designed by our research team was delivered to educators who work in special education schools. Results Approximately 86 % of the 388 special education school teachers and teacher’s aides in this study experienced musculoskeletal disorders. The lower back, shoulder, and wrist were the three most affected regions. A logistic regression analysis revealed that the participants’ background factors, namely >5.5 years of experience (odds ratio [OR] = 4.090, 95 % CI: 1.350-12.390, students with multiple disorders (OR = 2.412, 95 % CI: 1.100-5.287, and other work-related ergonomic factors (assistance in diaper changing and others duties, were strongly associated with the prevalence of WMSD. Nap habit (OR = 0.442, 95 % CI: 0.230-0.851 and having teaching partners in the same class (OR = 0.486, 95 % CI: 0.250-0.945 resulted in low possibility of acquiring WMSDs. The use of supportive devices was associated with a low WMSD prevalence. Conclusions The present study revealed an association between WMSDs and specific job features among teachers and teacher’s aides in special education schools. Future efforts should emphasize examining safe student-handling ergonomics, formulating policies regarding student-teacher ratio, incorporating mandatory break times at the workplaces, and promoting personal health for preventing work

Is a participatory approach effective to stimulate using ergonomic measures?

NARCIS (Netherlands)

Molen, H.F. van der; Sluiter, J.K.; Hulshof, C.T.J.; Vink, P.; Duivenbooden, J.C. van; Holman, R.; Frings-Dresen, M.H.W.

2006-01-01

The objective of this study was to examine the effect of a participatory ergonomics (PE) implementation strategy on the use of ergonomic measures reducing the physical work demands of construction work. The ergonomic measures consisted of adjusting working height (two measures) and mechanising the

Design of Work Facilities for Reducing Musculoskeletal Disorders Risk in Paper Pallet Assembly Station

Science.gov (United States)

Mardi Safitri, Dian; Arfi Nabila, Zahra; Azmi, Nora

2018-03-01

Musculoskeletal Disorders (MSD) is one of the ergonomic risks due to manual activity, non-neutral posture and repetitive motion. The purpose of this study is to measure risk and implement ergonomic interventions to reduce the risk of MSD on the paper pallet assembly work station. Measurements to work posture are done by Ovako Working Posture Analysis (OWAS) methods and Rapid Entire Body Assessment (REBA) method, while the measurement of work repetitiveness was using Strain Index (SI) method. Assembly processes operators are identified has the highest risk level. OWAS score, Strain Index, and REBA values are 4, 20.25, and 11. Ergonomic improvements are needed to reduce that level of risk. Proposed improvements will be developed using the Quality Function Deployment (QFD) method applied with Axiomatic House of Quality (AHOQ) and Morphological Chart. As the result, risk level based on OWAS score & REBA score turn out from 4 & 11 to be 1 & 2. Biomechanics analysis of the operator also shows the decreasing values for L4-L5 moment, compression, joint shear, and joint moment strength.

Elementary Ergonomics

Science.gov (United States)

Grayson, Jennifer

2009-01-01

What's the number 1 threat to young students using computers today? According to Dan Odell, Microsoft's in-house ergonomist, when he asked parents this very question, "the things they were most concerned about were online predators and people taking advantage of their kids. Ergonomics was fairly far down the list." Unfortunately, that…

Analysis of ergonomic furniture made of wood and sub-products from renewable forests.

Science.gov (United States)

de Oliveira, Luciana Aparecida; de Souza, Amaury Paulo; Fialho, Patrícia Bhering; Minette, Luciano José; de Torres, Fernanda Freitas Costa

2012-01-01

The furniture ergonomic evaluation was carried out through the use of questionnaires and forms in industries. For the ergonomic product analysis, it was used the methodology "Object Ergonomics - Ergonomic System Technical Reading" (design goals and management actions), and measurements of products. The values achieved were compared with the standard dimensions, and the compliance or non-compliance of the furniture to it was assessed. In relation to the dimensions of the bed, the following variables did not comply with the norms: external and internal length, external and internal width, height and width of the sidebar and distance to the floor. The dimensions of these variables were above the recommended values. The double bed was inadequate for management actions and maintenance. Since the kitchen cabinet is a product that went through physical testing and follows national standards; the finish used is powder coating. The kitchen cabinet proved to be appropriate in all design requirements and for management actions. Both furniture pieces were inadequate, considering the difficulty for maintenance when a product or part of it was damaged. It was recommended the creation of regulatory standards for the production of safe and comfortable furniture.

Ergonomics at Volkswagen Brasil. Multidisciplinary work to equalize health, productivity and quality.

Science.gov (United States)

Filus, Rodrigo; Wruca, Rodrigo; Charleaux, Vanessa; Ortega, Auro; Ferreira, Claudio; Jesus, Leandro; Stramari, Anderson; Neufel, Michel; Maia, Uyara

2012-01-01

Following the technological developments and presented to the multidisciplinary processes as automakers, Volkswagen Brazil, represented by its ergonomists, through this paper, shows the importance of ergonomic efficiency of management applied to various levels of life of a product, since its creation to its final implementation on production lines.The preventive work of ergonomists during the processes leading to production of a vehicle is accomplished through assessments on a simulated system called the Digital Factory. Since the initial stages to final product delivery there is a need for a multidisciplinary aligning the concepts of ergonomics, productivity and quality of product. Industrial Engineering, Process Engineering, ergonomists and workers are involved in the analysis made through the Workshop's showing the importance of discussion between the various users of the systems. The processes of series are also equipped with a set of certifications flow of job and planned audits on items that describe processes and applied ergonomics.

Ergonomics and cultural heritage: the Palatina chapel in Palermo, Italy

Directory of Open Access Journals (Sweden)

Salvatore Barbaro

2007-07-01

Full Text Available The present article presents results of a study that aims at the assessment of ergonomic safety conditions inside the Palatina chapel of Palermo. To reach this object, an informative questionnaire was established so as to collect visitors’ subjective judgments regarding overall ergonomic conditions in terms of accessibility, availability, safety or else environmental conditions (thermo-hygrometry; air, sound and visual quality; this stage was carried out, bearing in mind the Museum Visitors’ Rights Card that is currently under creation by the “Legambiente” group. An automatic instrument was bought to daily count the numbers of visitors; the latter element shall then be related to indoor environmental data registered thanks to a monitoring system of thermohygrometry, illuminating engineering and environmental aggressiveness.

Ergonomic office design and aging: a quasi-experimental field study of employee reactions to an ergonomics intervention program.

Science.gov (United States)

May, Douglas R; Reed, Kendra; Schwoerer, Catherine E; Potter, Paul

2004-04-01

A naturally occurring quasi-experimental longitudinal field study of 87 municipal employees using pretest and posttest measures investigated the effects of an office workstation ergonomics intervention program on employees' perceptions of their workstation characteristics, levels of persistent pain, eyestrain, and workstation satisfaction. The study examined whether reactions differed between younger and older employees. Results revealed that workstation improvements were associated with enhanced perceptions of the workstation's ergonomic qualities, less upper back pain, and greater workstation satisfaction. Among those experiencing an improvement, the perceptions of workstation ergonomic qualities increased more for younger than older employees, supporting the "impressionable years" framework in the psychological literature on aging. Implications for human resources managers are discussed.

Clinical, Ergonomic, and Economic Outcomes With Multichamber Bags Compared With (Hospital) Pharmacy Compounded Bags and Multibottle Systems: A Systematic Literature Review.

Science.gov (United States)

Alfonso, Jorge Emilio; Berlana, David; Ukleja, Andrew; Boullata, Joseph

2017-09-01

Multichamber bags (MCBs) may offer potential clinical, ergonomic, and economic advantages compared with (hospital) pharmacy compounded bags (COBs) and multibottle systems (MBSs). A systematic literature review was performed to identify and assess the available evidence regarding advantages of MCBs compared with COBs and MBSs. Medline, Embase, the Cochrane Databases, and EconLit were searched for articles reporting clinical, ergonomic, and economic outcomes for MCBs compared with COBs or MBSs. The search was limited to studies conducted in hospitalized patients >2 years of age that were published in English between January 1990 and November 2014. The Population Intervention Comparison Outcomes Study Design (PICOS) framework was used for the analysis. From 1307 unique citations, 74 potentially relevant publications were identified; review of references identified 2 additional publications. Among the 76 publications, 18 published studies met the inclusion criteria. Most were retrospective in design. Ten studies reported clinical outcomes, including 1 prospective randomized trial and multiple retrospective analyses that reported a lower risk of bloodstream infection for MCBs compared with other delivery systems. Sixteen studies reported ergonomic and/or economic outcomes; most reported a potential cost benefit for MCBs, with consistent reports of reduced time and labor compared with other systems. The largest cost benefit was observed in studies evaluating total hospitalization costs. The systematic literature review identified evidence of potential clinical, ergonomic, and economic benefits for MCBs compared with COBs and MBSs; however, methodological factors limited evidence quality. More prospective studies are required to corroborate existing evidence.

Fitting methods to paradigms: are ergonomics methods fit for systems thinking?

Science.gov (United States)

Salmon, Paul M; Walker, Guy H; M Read, Gemma J; Goode, Natassia; Stanton, Neville A

2017-02-01

The issues being tackled within ergonomics problem spaces are shifting. Although existing paradigms appear relevant for modern day systems, it is worth questioning whether our methods are. This paper asks whether the complexities of systems thinking, a currently ubiquitous ergonomics paradigm, are outpacing the capabilities of our methodological toolkit. This is achieved through examining the contemporary ergonomics problem space and the extent to which ergonomics methods can meet the challenges posed. Specifically, five key areas within the ergonomics paradigm of systems thinking are focused on: normal performance as a cause of accidents, accident prediction, system migration, systems concepts and ergonomics in design. The methods available for pursuing each line of inquiry are discussed, along with their ability to respond to key requirements. In doing so, a series of new methodological requirements and capabilities are identified. It is argued that further methodological development is required to provide researchers and practitioners with appropriate tools to explore both contemporary and future problems. Practitioner Summary: Ergonomics methods are the cornerstone of our discipline. This paper examines whether our current methodological toolkit is fit for purpose given the changing nature of ergonomics problems. The findings provide key research and practice requirements for methodological development.

Feasibility and acceptance of a robotic surgery ergonomic training program.

Science.gov (United States)

Franasiak, Jason; Craven, Renatta; Mosaly, Prithima; Gehrig, Paola A

2014-01-01

Assessment of ergonomic strain during robotic surgery indicates there is a need for intervention. However, limited data exist detailing the feasibility and acceptance of ergonomic training (ET) for robotic surgeons. This prospective, observational pilot study evaluates the implementation of an evidence-based ET module. A two-part survey was conducted. The first survey assessed robotic strain using the Nordic Musculoskeletal Questionnaire (NMQ). Participants were given the option to participate in either an online or an in-person ET session. The ET was derived from Occupational Safety and Health Administration guidelines and developed by a human factors engineer experienced with health care ergonomics. After ET, a follow-up survey including the NMQ and an assessment of the ET were completed. The survey was sent to 67 robotic surgeons. Forty-two (62.7%) responded, including 18 residents, 8 fellows, and 16 attending physicians. Forty-five percent experienced strain resulting from performing robotic surgery and 26.3% reported persistent strain. Only 16.6% of surgeons reported prior ET in robotic surgery. Thirty-five (78%) surgeons elected to have in-person ET, which was successfully arranged for 32 surgeons (91.4%). Thirty-seven surgeons (88.1%) completed the follow-up survey. All surgeons participating in the in-person ET found it helpful and felt formal ET should be standard, 88% changed their practice as a result of the training, and 74% of those reporting strain noticed a decrease after their ET. Thus, at a high-volume robotics center, evidence-based ET was easily implemented, well-received, changed some surgeons' practice, and decreased self-reported strain related to robotic surgery.

The proactive approach--is it worthwhile? A prospective controlled ergonomic intervention study in office workers.

Science.gov (United States)

Laestadius, Jasminka Goldoni; Ye, Jian; Cai, Xiaodong; Ross, Sandra; Dimberg, Lennart; Klekner, Meg

2009-10-01

Does proactive ergonomics program enhance office worker health and productivity? The investigation was conducted in connection with the move of 1500 office staff to a building with improved ergonomics. It was focused on associations between workstation features, working postures, musculoskeletal pain symptoms, and eye strain before and 18 months after implementation of a proactive ergonomic program. The outcomes were compared between the intervention and a similar reference group. Associations between improvement of postures and less musculoskeletal pain and eye strain were confirmed. A cross association between several features and postures and improved symptoms was noted, along with improved productivity. The study suggests that a proactive program adhering to the OSHA recommendations needs to include an individual workstation assessment to be effective in reducing symptoms and increasing productivity.

Ergonomic work analysis: A case study of bus drivers in the private collective transportation sector.

Science.gov (United States)

Araújo, Adolfo Vicente; Arcanjo, Gemima Santos; Fernandes, Haroldo; Arcanjo, Georgia Santos

2018-05-03

The collective transportation system is essential to reduce the number of automobiles in the roads. Concerns exist related to quality, comfort and safety of bus driver's workstations. The objective of this study was to improve the driver's workstation in the private collective transportation sector by analyzing ergonomic practices using the Ergonomic Work Analysis (EWA). The EWA was chosen because it seeks to evaluate the labor condition as it relates to the psychophysiological conditions of workers, it complies with regulatory standard 17 (NR17). To identify driver concerns, interviews and questionnaires were administered. The workstation and worker routines were observed. The analysis revealed that the largest number of complaints related to noise, display light and location of the passenger identifier device. Drivers reported discomfort in the knees and lower back. Recommendations were made to improve the workstation and change the routine to minimize the discomfort and ergonomic risk factors.

What price ergonomics?

OpenAIRE

Stanton, NA; Young, MS

1999-01-01

Ergonomists have a say in the design of almost everything in the modern world, but there is little evidence that their methods actually work. Here is an evaluation of those methods and of the worth of ergonomics in design.

Does a robotic surgery approach offer optimal ergonomics to gynecologic surgeons?: a comprehensive ergonomics survey study in gynecologic robotic surgery.

Science.gov (United States)

Lee, Mija Ruth; Lee, Gyusung Isaiah

2017-09-01

To better understand the ergonomics associated with robotic surgery including physical discomfort and symptoms, factors influencing symptom reporting, and robotic surgery systems components recommended to be improved. The anonymous survey included 20 questions regarding demographics, systems, ergonomics, and physical symptoms and was completed by experienced robotic surgeons online through American Association of Gynecologic Laparoscopists (AAGL) and Society of Robotic Surgery (SRS). There were 289 (260 gynecology, 22 gynecology-oncology, and 7 urogynecology) gynecologic surgeon respondents regularly practicing robotic surgery. Statistical data analysis was performed using the t-test, χ² test, and logistic regression. One hundred fifty-six surgeons (54.0%) reported experiencing physical symptoms or discomfort. Participants with higher robotic case volume reported significantly lower physical symptom report rates (pergonomic settings not only acknowledged that the adjustments were helpful for better ergonomics but also reported a lower physical symptom rate (pergonomic settings (32.7%), took a break (33.3%) or simply ignored the problem (34%). Fingers and neck were the most common body parts with symptoms. Eye symptom complaints were significantly decreased with the Si robot (pergonomics were microphone/speaker, pedal design, and finger clutch. More than half of participants reported physical symptoms which were found to be primarily associated with confidence in managing ergonomic settings and familiarity with the system depending on the volume of robotic cases. Optimal guidelines and education on managing ergonomic settings should be implemented to maximize the ergonomic benefits of robotic surgery. Copyright © 2017. Asian Society of Gynecologic Oncology, Korean Society of Gynecologic Oncology

Design and Evaluation of Ergonomic Interventions for the Prevention of Musculoskeletal Disorders in India

Science.gov (United States)

2014-01-01

Background Improper workstation, work procedures and tools are found to be the risk factors for the development of musculoskeletal disorders among the informal sector workers of the developing countries. Low cost ergonomic interventions can effectively improve such adverse conditions. Case presentation In the present article some studies related to design interventions in different informal and agricultural sectors were discussed and their efficacies were analyzed. It was observed that with the help of appropriate interventions musculoskeletal disorders were reduced, adverse physiological conditions were improved when awkward postures were corrected and ultimately the organisational productivity was increased. Conclusion Proper implementation of ergonomic interventions can ultimately improve the economy of the nation. PMID:25009740

Toward a transdisciplinary approach of ergonomic design for sustainability.

Science.gov (United States)

Di Bucchianico, Giuseppe; Marano, Antonio; Rossi, Emilio

2012-01-01

Starting from the results of a theoretical and methodological study on Ergonomic design for sustainability previously developed from the authors, this paper shows the early results of a study that tries to apply them to actual operational and conceptual apparatuses of Ergonomics. In particular, the research aims to verify the possibility for Ergonomics to initiate an update of its current theoretical and procedural tools, towards new design solutions of "sustainable well-being", trying to look for new declinations of its several fields of application. The paper identifies new paradigms and definitions for one of the central themes of ergonomic design, as well as one among the most established and investigated: the usability of products and services.

Ergonomics and information technique

International Nuclear Information System (INIS)

Krueger, H.

1985-01-01

Ergonomics are an essential safety factor in controlling automated processes. It has to be taken into account in three stages: information presentation, information perception and information treatment

Designing the Electronic Classroom: Applying Learning Theory and Ergonomic Design Principles.

Science.gov (United States)

Emmons, Mark; Wilkinson, Frances C.

2001-01-01

Applies learning theory and ergonomic principles to the design of effective learning environments for library instruction. Discusses features of electronic classroom ergonomics, including the ergonomics of physical space, environmental factors, and workstations; and includes classroom layouts. (Author/LRW)

The modulation of upper extremity musculoskeletal disorders for a knowledge worker with chiropractic care and applied ergonomics: a case study

Science.gov (United States)

Sherrod, Charles W.; Casey, George; Dubro, Robert E.; Johnson, Dale F.

2013-01-01

Objective This report describes the case management of musculoskeletal disorders for an employee in a college work environment using both chiropractic care and applied ergonomics. Clinical Findings A 54-year-old male office worker presented with decreased motor function in both wrists; intermittent moderate-to-severe headaches; and pain or discomfort in the neck, both shoulders, left hand and wrist, and lumbosacral region resulting from injuries sustained during recreational soccer and from excessive forces and awkward postures when interacting with his home and office computer workstations. Intervention and Results Ergonomic training, surveillance, retrofitted equipment with new furniture, and an emphasis on adopting healthy work-style behaviors were applied in combination with regular chiropractic care. Baseline ergonomic job task analysis identified risk factors and delineated appropriate control measures to improve the subject's interface with his office workstation. Serial reevaluations at 3-month, 1-year, and 2-year periods recorded changes to the participant's pain, discomfort, and work-style behaviors. At end of study and relative to baseline, pain scale improved from 4/10 to 2/10; general disability improved from 4 to 0; and hand grip strength (pounds) increased from 20 to 105 (left) and 45 to 100 (right). Healthy work habits and postures adopted in the 3-month to 1-year period regressed to baseline exposures for 3 of 6 risk priorities identified in the ergonomic job task analysis. Conclusion The patient responded positively to the intervention of chiropractic care and applied ergonomics. PMID:23997724

Following ergonomics guidelines decreases physical and cardiovascular workload during cleaning tasks

DEFF Research Database (Denmark)

Samani, Afshin; Holtermann, Andreas; Søgaard, Karen

2012-01-01

The aim was to investigate the effect of ergonomics guidelines on muscular activity, postural and cardiovascular load during cleaning. Eighteen cleaners performed 10 min of cleaning tasks in two locations; three min in a laboratory and seven min in a lecture room. All participants performed...... the task with or without focusing on ergonomics guidelines (ergonomics/non-ergonomics session). Bipolar surface electromyography was recorded bilaterally from upper trapezius and erector spinae muscles. A tri-axial accelerometer package was mounted on the low back (L5-S1) to measure postural changes......, and the cardiovascular load was estimated by electrocardiogram. Ergonomics sessions resulted in lower muscular load, a more complex pattern of muscular activity, lower range of motion and angular velocity of the trunk as well as lower cardiovascular load compared with non-ergonomics sessions (p ...

The development of an ergonomics training program to identify, evaluate, and control musculoskeletal disorders among nursing assistants at a state-run veterans' home.

Science.gov (United States)

Peterson, Erica L; McGlothlin, James D; Blue, Carolyn L

2004-01-01

Nursing assistants (NAs) who work in nursing and personal care facilities are twice and five times more likely, respectively, to suffer a musculoskeletal disorder compared to service industries and other health care facilities, respectively. The purpose of this study was to develop an ergonomics training program for selected NAs at a state-run veterans' home to decrease musculoskeletal disorders by 1) developing questionnaires to assess musculoskeletal stress, 2) evaluating the work environment, 3) developing and using a training package, and 4) determining the application of the information from the training package by NAs on the floor. Results show two new risk factors not previously identified for nursing personnel in the peer-reviewed literature. Quizzes given to the nursing personnel before and after training indicated a significant improvement in understanding the principles of ergonomics and patient-handling techniques. Statistical analysis comparing the pre-training and post-training questionnaires indicated no significant decrease in musculoskeletal risk factors and no significant reduction in pain or discomfort or overall mental or physical health.

Develop and Manufacture an Ergonomically Sound Glovebox Glove Report

Energy Technology Data Exchange (ETDEWEB)

Lawton, Cindy M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-10-18

Ergonomic injury and radiation exposure are two safety concerns for the Plutonium Facility at Los Alamos National Laboratory (LANL). This facility employs the largest number of gloveboxes (GB) at LANL with approximately 6000 gloves installed. The current GB glove design dates back to the 1960’s and is not based on true hand anatomy, revealing several issues: short fingers, inappropriate length from the wrist to finger webbing, nonexistent joint angles and incorrect thumb placement. These design flaws are directly related to elbow (lateral epicondylitis) and thumb (DeQuervain’s tenosynovitis) injuries. The current design also contributes to increased wear on the glove, causing unplanned glove openings (failures) which places workers at risk of exposure. An improved glovebox glove design has three significant benefits: 1) it will reduce the risk of injury, 2) it will improve comfort and productivity, and 3) it will reduce the risk of a glovebox failures. The combination of these three benefits has estimated savings of several million dollars. The new glove design incorporated the varied physical attributes of workers ranging from the 5^th percentile female to the 95th percentile male. Anthropometric hand dimensions along with current GB worker dimensions were used to develop the most comprehensive design specifications for the new glove. Collaboration with orthopedic hand surgeons also provided major contributtions to the design. The new glovebox glove was developed and manufactured incorporating over forty dimensions producing the most comprehensive ergonomically sound design. The new design received a LANL patent (patent attorney docket No: LANS 36USD1 “Protective Glove”, one of 20 highest patents awarded by the Richard P. Feynman Center for Innovation. The glove dimensions were inputed into a solid works model which was used to produce molds. The molds were then shipped to a glove manufacturer for production of the new glovebox gloves. The new

Differences in ergonomic and workstation factors between computer office workers with and without reported musculoskeletal pain.

Science.gov (United States)

Rodrigues, Mirela Sant'Ana; Leite, Raquel Descie Veraldi; Lelis, Cheila Maira; Chaves, Thaís Cristina

2017-01-01

Some studies have suggested a causal relationship between computer work and the development of musculoskeletal disorders. However, studies considering the use of specific tools to assess workplace ergonomics and psychosocial factors in computer office workers with and without reported musculoskeletal pain are scarce. The aim of this study was to compare the ergonomic, physical, and psychosocial factors in computer office workers with and without reported musculoskeletal pain (MSP). Thirty-five computer office workers (aged 18-55 years) participated in the study. The following evaluations were completed: Rapid Upper Limb Assessment (RULA), Rapid Office Strain Assessment (ROSA), and Maastricht Upper Extremity Questionnaire revised Brazilian Portuguese version (MUEQ-Br revised). Student t-tests were used to make comparisons between groups. The computer office workers were divided into two groups: workers with reported MSP (WMSP, n = 17) and workers without positive report (WOMSP, n = 18). Those in the WMSP group showed significantly greater mean values in the total ROSA score (WMSP: 6.71 [CI95% :6.20-7.21] and WOMSP: 5.88 [CI95% :5.37-6.39], p = 0.01). The WMSP group also showed higher scores in the chair section of the ROSA, workstation of MUEQ-Br revised, and in the upper limb RULA score. The chair height and armrest sections from ROSA showed the higher mean values in workers WMSP compared to workers WOMSP. A positive moderate correlation was observed between ROSA and RULA total scores (R = 0.63, p ergonomics indexes for chair workstation and worse physical risk related to upper limb (RULA upper limb section) than workers without pain. However, there were no observed differences in workers with and without MSP regarding work-related psychosocial factors. The results suggest that inadequate workstation conditions, specifically the chair height, arm and back rest, are linked to improper upper limb postures and that these factors are contributing to

Business case for implementing two ergonomic interventions at an electric power utility.

Science.gov (United States)

Seeley, Patricia A; Marklin, Richard W

2003-09-01

Ergonomics analysis of line workers in the electric power industry who work overhead on utility poles revealed some tasks for which less than 1% of the general population had sufficient strength to perform. During a 2-year study, a large Midwestern US electric utility provided a university with a team of represented workers and management. They evaluated, recommended, and monitored interventions for 32 common line worker tasks that were rated at medium to high magnitude of risk factors for musculoskeletal disorders (MSDs). Two of the recommended ergonomic interventions-the battery-operated press and cutter-were selected by the team as having the greatest potential for reducing risk factors of MSDs. Only overhead distribution line worker tasks were evaluated. A business case was formulated that took into account medical injury and illness statistics, workers' compensation, replacement worker and retraining costs. An outline of a business case formulation and a sample intervention payback calculation is shown. Based on the business case, the utility committed over US dollars 300000 to purchase battery-operated presses and cutters for their overhead distribution line crews.

Musculoskeletal symptoms and ergonomic hazards among material handlers in grocery retail industries

Science.gov (United States)

Nasrull Abdol Rahman, Mohd; Zuhaidi, Muhammad Fareez Ahmad

2017-08-01

Grocery retail work can be physically demanding as material handler’s tasks involve manual lifting, lowering, carrying, pushing and pulling loads. The nature of this work puts them at a risk for serious low back pain, shoulder pain and other musculoskeletal injuries. This study was conducted by using two different types of tools which were Nordic Musculoskeletal Questionnaire (NMQ) as a survey and Washington Industrial Safety and Health Act (WISHA) Checklist as a direct observation method. Among 46 males and 14 females material handlers were involved throughout this study. For NMQ, the highest body part trouble in the last 12 months was low back pain (88.3%), followed by upper back (68.3%), neck (55.3%) and shoulder (36.7%). While for WISHA Checklist, most of them experienced hazard level involving awkward posture and high hand force. From the research conducted, musculoskeletal disorders (MSDs) and ergonomic risk factors (ERFs) do related as it showed that musculoskeletal disorders may arise if the workers ignored the safety in ergonomic hazards.

Validating a framework for participatory ergonomics (the PEF)

NARCIS (Netherlands)

Haines, H.; Wilson, J.R.; Vink, P.; Koningsveld, E.

2002-01-01

Participatory ergonomics is reported in an increasing number of case studies, but there is little evidence of emerging supportive theory and relatively little generic advice or guidance. The paper describes an effort to provide clarity and organization to the field of participatory ergonomics. A

Re-education of good ergonomics in nursing for Suomikoti

OpenAIRE

Isoheiko, Johanna

2016-01-01

The aim of this thesis was to promote and “refresh” the good ergonomics in nursing for Suomikoti in Sweden. The author noticed the need for re-education or “refreshment” of the nursing ergonomics among the permanent personnel as well updating knowledge of functioning of the existing assistive devices. Suomikoti has already a good and comprehensive transfer and ergonomics education and practical training for new employees arranged by their own physiotherapist and occupational therapist. It cov...

The ergonomics of command and control

OpenAIRE

Stanton, NA; Baber, C

2006-01-01

Since its inception, just after the Second World War, ergonomics research has paid special attention to the issues surrounding human control of systems. Command and Control environments continue to represent a challenging domain for Ergonomics research. We take a broad view of Command and Control research, to include C2 (Command and Control), C3 (Command, Control and Communication), and C4 (Command, Control, Communication and Computers) as well as human supervisory control paradigms. This spe...

Successful integration of ergonomics into continuous improvement initiatives.

Science.gov (United States)

Monroe, Kimberly; Fick, Faye; Joshi, Madina

2012-01-01

Process improvement initiatives are receiving renewed attention by large corporations as they attempt to reduce manufacturing costs and stay competitive in the global marketplace. These initiatives include 5S, Six Sigma, and Lean. These programs often take up a large amount of available time and budget resources. More often than not, existing ergonomics processes are considered separate initiatives by upper management and struggle to gain a seat at the table. To effectively maintain their programs, ergonomics program managers need to overcome those obstacles and demonstrate how ergonomics initiatives are a natural fit with continuous improvement philosophies.

Effectiveness of a participatory ergonomics intervention in improving communication and psychosocial exposures.

Science.gov (United States)

Laing, A C; Cole, D C; Theberge, N; Wells, R P; Kerr, M S; Frazer, M B

2007-07-01

A participatory ergonomics programme was implemented in an automotive parts manufacturing factory in which an ergonomics change team was formed, composed of members from management, the organized labour union and the research team. It was hypothesized that the participatory nature of this change process would result in enhanced worker perceptions of workplace communication dynamics, decision latitude and influence, which in conjunction with anticipated mechanical exposure reductions would lead to reduced worker pain severity. Utilizing a sister plant in the corporation as a referent group, a quasi-experimental design was employed with a longitudinal, repeat questionnaire approach to document pre-post intervention changes. Nine participatory activities (psychosocial interventions) were implemented as part of the process. Communication dynamics regarding ergonomics were significantly enhanced at the intervention plant compared to the referent plant. However, there were no significantly different changes in worker perceptions of decision latitude or influence between the two plants, nor did pain severity change. Possible explanations for these results include limited intervention intensity, context and co-intervention differences between the two plants, high plant turnover reducing the statistical power of the study and lack of sensitivity and specificity in the psychosocial measures used. Further research should include the development of psychosocial tools more specific to participatory ergonomic interventions and the assessment of the extent of change in psychosocial factors that might be associated with improvements in pain.

Ergonomics and control room design

International Nuclear Information System (INIS)

Williams, J.C.; Story, D.T.

1987-01-01

The application of ergonomic principles to the design process and some aspects of the Sizewell B control room is discussed. Also outlined is the management process which ensures that these principles are applied systematically throughout the design development activity and highlights the functional requirements which must also be met in the creation of a total man-machine system package which meets all the technical design criteria. The ergonomics requirements are part of this process and extend into all aspects of design ranging from such matters as workplace organization to environmental factors, social engineering, communications and aesthetics. (author)

[Functions of participatory ergonomics programs in reducing work-related musculoskeletal disorders].

Science.gov (United States)

Guo, M J; Liu, J J; Yao, H Y

2016-08-10

Work-related musculoskeletal disorders (MSDs) are most commonly seen in all the occupational non-fatal injuries and illnesses for workers, especially those who are involved in labor-intensive industries. Participatory ergonomics is frequently used to prevent musculoskeletal disorders. This paper gives an overview of a historical perspective on the use of participatory ergonomics approach in reducing the health effects of labor-intensive industries. Progress, barriers and facilitators on the organization, implementation and evaluation of participatory ergonomics programs are studied. Participatory ergonomics seems a successful method to develop, prioritize measures to prevent MSDs. Participatory ergonomics can help industries reduce musculoskeletal injuries and disorders, improve workplace condition and promote health conditions of the workers.

Nature: a new paradigm for well-being and ergonomics.

Science.gov (United States)

Richardson, Miles; Maspero, Marta; Golightly, David; Sheffield, David; Staples, Vicki; Lumber, Ryan

2017-02-01

Nature is presented as a new paradigm for ergonomics. As a discipline concerned with well-being, the importance of natural environments for wellness should be part of ergonomics knowledge and practice. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being. Further, an emerging body of research has found relationships between well-being and a connection to nature, a concept that reveals the integrative character of human experience which can inform wider practice and epistemology in ergonomics. Practitioners are encouraged to bring nature into the workplace, so that ergonomics keeps pace with the move to nature-based solutions, but also as a necessity in the current ecological and social context. Practitioner Summary: Nature-based solutions are coming to the fore to address societal challenges such as well-being. As ergonomics is concerned with well-being, there is a need for a paradigm shift in the discipline. This position is supported by providing a concise summary of the evidence of the value of the natural environment to well-being.

Integrating ergonomics into the product development process

DEFF Research Database (Denmark)

Broberg, Ole

1997-01-01

and production engineers regarding information sources in problem solving, communication pattern, perception of ergonomics, motivation and requests to support tools and methods. These differences and the social and organizational contexts of the development process must be taken into account when considering......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The purpose was to elucidate conditions and strategies for integrating ergonomics into the product development process thereby preventing ergonomic problems at the time...... of manufacture of new products. In reality the product development process is not a rational problem solving process and does not proceed in a sequential manner as decribed in engineering models. Instead it is a complex organizational process involving uncertainties, iterative elements and negotiation between...

Preliminary study of ergonomic behavior during simulated ultrasound-guided regional anesthesia using a head-mounted display.

Science.gov (United States)

Udani, Ankeet D; Harrison, T Kyle; Howard, Steven K; Kim, T Edward; Brock-Utne, John G; Gaba, David M; Mariano, Edward R

2012-08-01

A head-mounted display provides continuous real-time imaging within the practitioner's visual field. We evaluated the feasibility of using head-mounted display technology to improve ergonomics in ultrasound-guided regional anesthesia in a simulated environment. Two anesthesiologists performed an equal number of ultrasound-guided popliteal-sciatic nerve blocks using the head-mounted display on a porcine hindquarter, and an independent observer assessed each practitioner's ergonomics (eg, head turning, arching, eye movements, and needle manipulation) and the overall block quality based on the injectate spread around the target nerve for each procedure. Both practitioners performed their procedures without directly viewing the ultrasound monitor, and neither practitioner showed poor ergonomic behavior. Head-mounted display technology may offer potential advantages during ultrasound-guided regional anesthesia.

Workplace ergonomics in lean production environments: A literature review.

Science.gov (United States)

Arezes, Pedro M; Dinis-Carvalho, José; Alves, Anabela Carvalho

2015-01-01

Lean Production Systems (LPS) have become very popular among manufacturing industries, services and large commercial areas. A LPS must develop and consider a set of work features to bring compatibility with workplace ergonomics, namely at a muscular, cognitive and emotional demands level. Identify the most relevant impacts of the adoption of LPS from the ergonomics point of view and summarizes some possible drawbacks for workplace ergonomics due to a flawed application of the LPS. The impacts identified are focused in four dimensions: work pace, intensity and load; worker motivation, satisfaction and stress; autonomy and participation; and health outcome. This paper also discusses the influence that the work organization model has on workplace ergonomics and on the waste elimination previewed by LPS. Literature review focused LPS and its impact on occupational ergonomics conditions, as well as on the Health and Safety of workers. The main focus of this research is on LPS implementations in industrial environments and mainly in manufacturing industry workplaces. This is followed by a discussion including the authors' experience (and previous research). From the reviewed literature it seems that there is no consensus on how Lean principles affect the workplace ergonomics since most authors found positive (advantages) and negative (disadvantages) impacts. The negative impacts or disadvantages of LPS implementations reviewed may result from the misunderstanding of the Lean principles. Possibly, they also happen due to partial Lean implementations (when only one or two tools were implemented) that may be effective in a specific work context but not suitable to all possible situations as the principles of LPS should not lead, by definition, to any of the reported drawbacks in terms of workplace ergonomics.

A study of 6S workplace improvement in Ergonomic Laboratory

Science.gov (United States)

Sari, AD; Suryoputro, MR; Rahmillah, FI

2017-12-01

This article discusses 6S implementation in Ergonomic Laboratory, Department of Industrial Engineering, Islamic University of Indonesia. This research is improvement project of 5S implementation in Ergonomic laboratory. Referring to the 5S implementation of the previous year, there have been improvements from environmental conditions or a more organized workplace however there is still a lack of safety aspects. There are several safeties problems such as equipment arrangement, potential hazards of room dividers that cause injury several times, placement of fire extinguisher, no evacuation path and assembly point in case of fire, as well as expired hydrant condition and lack of awareness of stakeholders related to safety. Therefore, this study aims to apply the 6S kaizen method to the Ergonomic laboratory to facilitate the work process, reduce waste, improve work safety and improve staff performance. Based on the score 6S assessment increased audit results by 32 points, before implementation is 75 point while after implementation is 107 point. This has implications for better use for mitigate people in laboratory area, save time when looking for tools and materials, safe workplace, as well as improving the culture and spirit of ‘6S’ on staff due to better and safetier working environment.

Ergonomía. Vol. 1, Fundamentos

OpenAIRE

Rodríguez Mondelo, Pedro Manuel; Gregori Torada, Enrique; Barrau Bombardó, Pedro

2001-01-01

La obra ofrece una visión general de los aspectos básicos de la ergonomía. Está dividida en ocho capítulos, que abordan los temas de relaciones dimensionales, relaciones informáticas y de control, relaciones ambientales, gasto energético y capacidad de trabajo físico y trabajo mental. El libro pretende ser una guía básica para aquellas personas que se inicien en el apasionante campo de la ergonomía.

Task parameters affecting ergonomic demands and productivity of HVAC duct installation.

Science.gov (United States)

Mitropoulos, Panagiotis; Hussain, Sanaa; Guarascio-Howard, Linda; Memarian, Babak

2014-01-01

Mechanical installation workers experience work-related musculoskeletal disorders (WMSDs) at high rates. (1) Quantify the ergonomic demands during HVAC installation, (2) identify the tasks and task parameters that generated extreme ergonomic demands, and (3) propose improvements to reduce the WMSDs among mechanical workers. The study focused on installation of rectangular ductwork components using ladders, and analyzed five operations by two mechanical contractors. Using continuous time observational assessment, the videotaped operations were analyzed along two dimensions: (1) the production tasks and durations, and (2) the ergonomic demands for four body regions (neck, arms/shoulders, back, and knees). The analysis identified tasks with low portion of productive time and high portion of extreme postures, and task parameters that generated extreme postures. Duct alignment was the task with the highest portion of extreme postures. The position of the ladder (angle and distance from the duct) was a task parameter that strongly influenced the extreme postures for back, neck and shoulders. Other contributing factors included the difficulty to reach the hand tools when working on the ladder, the congestion of components in the ceiling, and the space between the duct and the ceiling. The identified tasks and factors provide directions for improvement.

Ergonomics Integration Omproving Production Process Management in Enterprises of Latvia

OpenAIRE

Henrijs Kaļķis

2013-01-01

Dotoral thesis ERGONOMICS INTEGRATION IMPROVING PRODUCTION PROCESS MANAGEMENT IN ENTERPRISES OF LATVIA ANNOTATION Ergonomics integration in process management has great significance in organisations` growth of productivity. It is a new approach to entrepreneurship and business strategy, where ergonomic aspects and values are taken into account in ensuring the effective process management and profitability of enterprises. This study is aimed at solution of the problem of e...

Design improvement of automated gallon washing machine to minimize musculoskeletal disorders (MSDs) in CV Barokah Abadi using ergonomic function deployment (EFD) approach

Science.gov (United States)

Fakhriza, Z.; Rahayu, M.; Iqbal, M.

2017-12-01

In the production activity of Bottled Drinking Water (AMDK) in CV Barokah Abadi there is a gallon washing station. At the work station it involves three stages of activity such as washing and rinsing the outside of the gallon, spraying the inside of the gallon and rubbing the inside of the gallon which is done in a separate place. Distribution of Nordic Body Map (NBM) questionnaires showing employee complaints data at gallon washing stations where workers complained of pain in the right upper arm, right forearm and right wrist respectively 88% and workers also complained of pain in the waist and The right hand respectively by 81%. Ergonomic gallon washer is one way to minimize the risk of MSDs. The design begins with an ergonomic evaluation of the existing conditions and the concept of the initial design of the gallon washer. The evaluation is utilized for consideration of design improvements with the utilization of Ergonomic Function Deployment (EFD) in order for the product concept to conform to the ECSHE principle (Effective, Comfortable, Safe, Healthy and Efficient). The tool improvement design can minimize the risk of MSDs seen from the worker’s posture while using an ergonomic washer.

An ergonomics study of a semiconductors factory in an IDC for improvement in occupational health and safety.

Science.gov (United States)

Bin, Wong Saw; Richardson, Stanley; Yeow, Paul H P

2010-01-01

The study aimed to conduct an ergonomic intervention on a conventional line (CL) in a semiconductor factory in Malaysia, an industrially developing country (IDC), to improve workers' occupational health and safety (OHS). Low-cost and simple (LCS) ergonomics methods were used (suitable for IDCs), e.g., subjective assessment, direct observation, use of archival data and assessment of noise. It was found that workers were facing noise irritation, neck and back pains and headache in the various processes in the CL. LCS ergonomic interventions to rectify the problems included installing noise insulating covers, providing earplugs, installing elevated platforms, slanting visual display terminals and installing extra exhaust fans. The interventions cost less than 3 000 USD but they significantly improved workers' OHS, which directly correlated with an improvement in working conditions and job satisfaction. The findings are useful in solving OHS problems in electronics industries in IDCs as they share similar manufacturing processes, problems and limitations.

Reducing musculoskeletal discomfort: effects of an office ergonomics workplace and training intervention.

Science.gov (United States)

Robertson, Michelle M; O'Neill, Michael J

2003-01-01

Effects of an office ergonomics workplace and training intervention on workers' knowledge and self-reported musculoskeletal pain and discomfort were investigated. An instructional systems design process was used to develop an office ergonomics training program and the evaluation tools used to measure the effectiveness of the training program on workers' office ergonomics knowledge and skills. It was hypothesized that the training and workplace intervention would allow the worker to more effectively use their workplace through increased office ergonomics knowledge and skills. Following the intervention, there was a significant increase in workers' office ergonomics knowledge and awareness. Self-reported work-related musculoskeletal disorders significantly decreased for the group who had a workplace change and received ergonomic training relative to a workplace change-only group and a no intervention control group.

Process evaluation of a participatory ergonomics programme to prevent low back pain and neck pain among workers

Directory of Open Access Journals (Sweden)

Driessen Maurice T

2010-08-01

Full Text Available Abstract Background Both low back pain (LBP and neck pain (NP are major occupational health problems. In the workplace, participatory ergonomics (PE is frequently used on musculoskeletal disorders. However, evidence on the effectiveness of PE to prevent LBP and NP obtained from randomised controlled trials (RCTs is scarce. This study evaluates the process of the Stay@Work participatory ergonomics programme, including the perceived implementation of the prioritised ergonomic measures. Methods This cluster-RCT was conducted at the departments of four Dutch companies (a railway transportation company, an airline company, a steel company, and a university including its university medical hospital. Directly after the randomisation outcome, intervention departments formed a working group that followed the steps of PE during a six-hour working group meeting. Guided by an ergonomist, working groups identified and prioritised risk factors for LBP and NP, and composed and prioritised ergonomic measures. Within three months after the meeting, working groups had to implement the prioritised ergonomic measures at their department. Data on various process components (recruitment, reach, fidelity, satisfaction, and implementation components, i.e., dose delivered and dose received were collected and analysed on two levels: department (i.e., working group members from intervention departments and participant (i.e., workers from intervention departments. Results A total of 19 intervention departments (n = 10 with mental workloads, n = 1 with a light physical workload, n = 4 departments with physical and mental workloads, and n = 4 with heavy physical workloads were recruited for participation, and the reach among working group members who participated was high (87%. Fidelity and satisfaction towards the PE programme rated by the working group members was good (7.3 or higher. The same was found for the Stay@Work ergocoach training (7.5 or higher. In total, 66

Do ergonomics improvements increase computer workers' productivity?: an intervention study in a call centre.

Science.gov (United States)

Smith, Michael J; Bayehi, Antoinette Derjani

2003-01-15

This paper examines whether improving physical ergonomics working conditions affects worker productivity in a call centre with computer-intensive work. A field study was conducted at a catalogue retail service organization to explore the impact of ergonomics improvements on worker production. There were three levels of ergonomics interventions, each adding incrementally to the previous one. The first level was ergonomics training for all computer users accompanied by workstation ergonomics analysis leading to specific customized adjustments to better fit each worker (Group C). The second level added specific workstation accessories to improve the worker fit if the ergonomics analysis indicated a need for them (Group B). The third level met Group B requirements plus an improved chair (Group A). Productivity data was gathered from 72 volunteer participants who received ergonomics improvements to their workstations and 370 control subjects working in the same departments. Daily company records of production outputs for each worker were taken before ergonomics intervention (baseline) and 12 months after ergonomics intervention. Productivity improvement from baseline to 12 months post-intervention was examined across all ergonomics conditions combined, and also compared to the control group. The findings showed that worker performance increased for 50% of the ergonomics improvement participants and decreased for 50%. Overall, there was a 4.87% output increase for the ergonomics improvement group as compared to a 3.46% output decrease for the control group. The level of productivity increase varied by the type of the ergonomics improvements with Group C showing the best improvement (9.43%). Even though the average production improved, caution must be used in interpreting the findings since the ergonomics interventions were not successful for one-half of the participants.

Ergonomics and its application to Sizewell 'B'

International Nuclear Information System (INIS)

Singleton, W.T.

1986-01-01

The scope of the ergonomics contribution to the design and operation of power stations is described on the basis of current experience in the CEGB and in other countries. The ergonomics questions which arise in relation to Sizewell 'B' are enumerated in detail. Issues which arise from the point of view of station operation and from the complementary point of view of human behaviour are considered. (author)

Ergonomic Conditions in Small Manufacturing Industries

Directory of Open Access Journals (Sweden)

Ashraf A. Shikdar

2001-12-01

Full Text Available Ergonomic conditions in small manufacturing industries were investigated. Twenty seven managers of small manufacturing industries participated in the study. Old equipment and machines, poorly designed workplaces, lack of systematic planning, layout and organization, unsafe working conditions and poor environment were found common to these industries. Fifty-nine percent of companies indicated having equipment older than 15 years. Fifty-two percent of company managers reported receiving complaints of fatigue from their workforce, 41% complaints of back pain, and 33% complaints of upper-body pain. Seventy eight percent of companies reported a noisy environment (above 90 dBA while 63% reported a hot environment. Management in 44% of the companies acknowledged failure to ensure safety rules and 48% did not provide training on manual material handling. Lack of skills in ergonomics and training, communication and resources are believed to be some of the factors contributing to the poor ergonomic conditions in a sample of small manufacturing industries in Malaysia.

Understanding safety and production risks in rail engineering planning and protection.

Science.gov (United States)

Wilson, John R; Ryan, Brendan; Schock, Alex; Ferreira, Pedro; Smith, Stuart; Pitsopoulos, Julia

2009-07-01

Much of the published human factors work on risk is to do with safety and within this is concerned with prediction and analysis of human error and with human reliability assessment. Less has been published on human factors contributions to understanding and managing project, business, engineering and other forms of risk and still less jointly assessing risk to do with broad issues of 'safety' and broad issues of 'production' or 'performance'. This paper contains a general commentary on human factors and assessment of risk of various kinds, in the context of the aims of ergonomics and concerns about being too risk averse. The paper then describes a specific project, in rail engineering, where the notion of a human factors case has been employed to analyse engineering functions and related human factors issues. A human factors issues register for potential system disturbances has been developed, prior to a human factors risk assessment, which jointly covers safety and production (engineering delivery) concerns. The paper concludes with a commentary on the potential relevance of a resilience engineering perspective to understanding rail engineering systems risk. Design, planning and management of complex systems will increasingly have to address the issue of making trade-offs between safety and production, and ergonomics should be central to this. The paper addresses the relevant issues and does so in an under-published domain - rail systems engineering work.

Evaluation of a Participatory Ergonomics Intervention in Small Commercial Construction Firms

Science.gov (United States)

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Gardner, Bethany T.; Buchholz, Bryan; Weaver, Nancy; Evanoff, Bradley A.

2017-01-01

Background Work-related musculoskeletal disorders (WMSD) among construction workers remain high. Participatory ergonomics (PE) interventions that engage workers and employers in reducing work injury risks have shown mixed results. Methods Eight-six workers from seven contractors participated in a PE program. A logic model guided the process evaluation and summative evaluation of short term and intermediate impacts and long term outcomes from surveys and field records. Results Process measures showed good delivery of training, high worker engagement, and low contractor participation. Workers’ knowledge improved and workers reported changes to work practices and tools used; contractor provision of appropriate equipment was low (33%). No changes were seen in symptoms or reported physical effort. Conclusions The PE program produced many worker-identified ergonomic solutions, but lacked needed support from contractors. Future interventions should engage higher levels of the construction organizational system to improve contractor involvement for reducing WMSD. PMID:27094450

Occupational ergonomics in space

Science.gov (United States)

Stramler, J.

1992-01-01

Ergonomics is often defined simply as the study of work. Related or synonymous terms include human factors, human engineering, engineering psychology, and others. Occupational ergonomics is a term that has been proposed to describe the study of the working environment, including the physical consequences resulting from having an improperly designed workplace. The routine space working environment presents some problems not found in the typical Earthbound workplace. These include radiation, intravehicular contamination/pollution, temperature extremes, impact with other objects, limited psychosocial relationships, sensory deprivation, and reduced gravity. These are important workplace considerations, and may affect astronauts either directly at work or at some point during their life as a result of their work under these conditions. Some of the major issues associated with each of these hazards are presented.

ERGONOMIC DESIGN RECOMMENDATIONS BASED ON AN ACTUAL CHAINSAW DESIGN

Directory of Open Access Journals (Sweden)

J. Kaljun

2012-01-01

Full Text Available

ENGLISH ABSTRACT: To develop high quality products, a designer has to consider various influential factors, one of which is ergonomics. And to fashion a specific product for the user, a designer needs expert knowledge of the user’s requirements. However, expert knowledge can also be accessed through an intelligent advisory system for ergonomic design support. The effectiveness of such an expert system depends mainly on the quality of the knowledge base and on the appropriateness of the system's inference engine. Data for the system’s knowledge base can be collected in different ways. One approach is to study relevant projects to collect appropriate ergonomic solutions; another is to recognise bottlenecks in ergonomic design. This paper presents a case study of the design of an actual chainsaw – with emphasis on ergonomic design solutions – that can be transformed into ergonomic design recommendations. At the end of the paper, an application of one of the derived recommendations within the knowledge base of the intelligent advisory system is presented.

AFRIKAANSE OPSOMMING: By die ontwerp van gehaltegoedere moet aandag gegee word aan verskeie faktore soos die Ergonomie. Die produkontwerper moet deeglike kennis dra van die verbruikersbehoeftes. Daarbenewens moet hy liefs ook gebruik maak van ’n intelligente sisteem vir ontwerphulp. Die navorsing is toegespits op datasteun vir ’n kettingsaagontwerp en toon hoe die intelligente sisteem betekenisvolle ondersteuning verleen.

The ambivalence of the work of the hotel managers: an approach to ergonomics.

Science.gov (United States)

de Gois Leite, Cyntia Maria; de Carvalho, Ricardo Josématos

2012-01-01

This article uses the contributions of ergonomics to understand the work performed by hotel managers. The concern to understand the job of managers is something new in the ergonomics and few studies address this issue, especially in what concerns the work of hotel managers and its aspects of performance and health, which is the focus of this article. Through a literature review on the subject, it is sought to understand the managers' work activity, the impacts on their health and their organizational performance, as managers take an ambivalent position in organizations, since they have to deal directly with the demands of upper and lower hierarchies in a context of high competition, organizational changes and user requirements. It is then inferred there is a risk of increased work density for managers, bringing negative consequences to their health and organizational performance. This phenomenon, still poorly covered by ergonomics, contributes to a certain invisibility of the manager's work in society as a whole, when the manager may suffer from health problems, which are also common in certain populations of workers who do not take the managerial function.

Integrating ergonomics into engineering design: the role of objects.

Science.gov (United States)

Hall-Andersen, Lene Bjerg; Broberg, Ole

2014-05-01

The objective of this study was to explore the role of objects in integrating ergonomic knowledge in engineering design processes. An engineering design case was analyzed using the theoretical concepts of boundary objects and intermediary objects: Boundary objects facilitate collaboration between different knowledge domains, while the aim of an intermediary object is to circulate knowledge and thus produce a distant effect. Adjustable layout drawings served as boundary objects and had a positive impact on the dialog between an ergonomist and designers. An ergonomic guideline document was identified as an intermediary object. However, when the ergonomic guidelines were circulated in the design process, only some of the guidelines were transferred to the design of the sterile processing plant. Based on these findings, recommendations for working with objects in design processes are included. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Human Factors And Ergonomics In The Planning Of Production

DEFF Research Database (Denmark)

Jensen, Per Langå

2002-01-01

For year’s integration of ergonomics into the planning of new production processes has been an ideal for regulating agencies supported by ergonomic experts. But the ideal appears to be difficult to live up to. A development of tools both by agencies and by groups of researchers has been seen...... of organizational conditions for giving ergonomics a stronger position in the firm. Ergonomists have to tackle these issues, but it implies a new understanding of their roles, which goes beyond the traditional discussion of expert versus facilitator. The paper is based on an evaluation of a Swedish research......-programme of a new approach to intervention studies on musculosceletaldiseases, on a major Danish research programme on integrating ergonomics (working environment) into the planning activities of the enterprises and on discussions with the staff of the Danish mandatory occupational health and safety services...

Using Balanced Scorecard (BSC) approach to improve ergonomics programs.

Science.gov (United States)

Fernandes, Marcelo Vicente Forestieri

2012-01-01

The purpose of this paper is to propose foundations for a theory of using the Balanced Scorecard (BSC) methodology to improve the strategic view of ergonomics inside the organizations. This approach may help to promote a better understanding of investing on an ergonomic program to obtain good results in quality and production, as well as health maintenance. It is explained the basics of balanced scorecard, and how ergonomists could use this to work with strategic enterprises demand. Implications of this viewpoint for the development of a new methodology for ergonomics strategy views are offered.

Process and implementation of participatory ergonomic interventions: a systematic review.

Science.gov (United States)

van Eerd, Dwayne; Cole, Donald; Irvin, Emma; Mahood, Quenby; Keown, Kiera; Theberge, Nancy; Village, Judy; St Vincent, Marie; Cullen, Kim

2010-10-01

Participatory ergonomic (PE) interventions may vary in implementation. A systematic review was done to determine the evidence regarding context, barriers and facilitators to the implementation of participatory ergonomic interventions in workplaces. In total, 17 electronic databases were searched. Data on PE process and implementation were extracted from documents meeting content and quality criteria and synthesised. The search yielded 2151 references. Of these, 190 documents were relevant and 52 met content and quality criteria. Different ergonomic teams were described in the documents as were the type, duration and content of ergonomic training. PE interventions tended to focus on physical and work process changes and report positive impacts. Resources, programme support, ergonomic training, organisational training and communication were the most often noted facilitators or barriers. Successful PE interventions require the right people to be involved, appropriate ergonomic training and clear responsibilities. Addressing key facilitators and barriers such as programme support, resources, and communication is paramount. STATEMENT OF RELEVANCE: A recent systematic review has suggested that PE has some effect on reducing symptoms, lost days of work and claims. Systematic reviews of effectiveness provide practitioners with the desire to implement but do not provide clear information about how. This article reviews the literature on process and implementation of PE.

Ergonomics intervention to reduce musculoskeletal disorders: case study in cement company production

Directory of Open Access Journals (Sweden)

Abbas Moradi

2016-09-01

Full Text Available Introduction:Musculoskeletal Disorders (MSDs are one of the most important factors occupational injuries and disabilities in workplaces. The aim of the persent study was ergonomics intervention to reducemusculoskeletal disorders. Methods: This interventional study was conduct on 126 preservation and maintenance  workers in cement company by classfication sampling. The Nordic Musculoskeletal Disorders Questionnaire, QEC and Ergonomics Checkpoint methods were used to collected data before and after the interventions. The interventional program include practical and easy to implment solutions for improvement safety,health and work conditions, workers trainig, selective and corrective exer Data  were analyzed by Mcnemar test using SPSS_22 software. Result: Data analysis showed  significant differences(P_value<0.001 between prevalnce of disorders during one week before interventions.  for lower back,back and were 62.70%, 60.32% and after intervention were reduce  to 46.03% and 43.65%. Conclusion: Acoording  to QEC method, 83 maintenance  workers ( 65.87% were at high risk  and prevalence  of lower back and knee was high that applying of  simple  and inexpensive solutions, participatory solutions of Ergonomics Checkpoint andselective corrective exerciselead to  musculoskeletal disorders reduction.

SUCCESS FRAMEWORK FOR TEACHING ERGONOMICS TO ENGINEERING STUDENTS

Directory of Open Access Journals (Sweden)

MUSHTAK AL-ATABI

2013-04-01

Full Text Available Taylor's University School of Engineering (Malaysia is a project-based-learning school that puts a conscious effort to educate engineers on the importance of applying ergonomic principles at the conceiving and designing stages of a product life cycle. This paper reports on an innovative approach to teaching ergonomics using the SUCCESS framework (Simple, Unexpected, Credible, Concrete, Emotions, Story, and Simulation. This teaching technique was adopted to engage the hearts and minds of the students and get them to embrace ergonomics as an important skill for engineers. Comparing students’ module evaluation and feedback, both before and after the adoption of the SUCCESS framework showed that students enjoyed the new approach of teaching and found it more fulfilling.

An assessment system for rating scientific journals in the field of ergonomics and human factors

NARCIS (Netherlands)

J. Dul (Jan); W. Karwowski

2003-01-01

textabstractA method for selecting and rating scientific and professional journals representing the discipline of ergonomics and human factors is proposed. The method is based upon the journal list, impact factors and citations provided by the Institute of Scientific Information (ISI), and the

[Nursing work and ergonomics].

Science.gov (United States)

Marziale, M H; Robazzi, M L

2000-12-01

This text articulates empirical evidence resulting from scientific work with the intention of providing a reflection about the application of ergonomics as a methodological instrument to support improvement of the labor conditions of nursing personnel in hospitals.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B [ed.; Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Advances in industrial ergonomics and safety II

Energy Technology Data Exchange (ETDEWEB)

Das, B. (ed.) (Technical University of Nova Scotia, Halifax, NS (Canada). Dept. of Industrial Engineering)

1990-01-01

135 papers were presented at the conference in 20 sessions with the following headings: aging and industrial performance; back injury and rehabilitation; bioinstrumentation and electromyography; cumulative trauma disorders; engineering anthropometry; equipment design and ergonomics; human computer interaction; human performance and worker satisfaction; human strength and testing; industrial accidents and prevention; industrial biomechanics; injuries in health care; manual materials handling; noise and vibration effects; occupational health and safety; robotics and agricultural machinery safety; statistics and modelling in ergonomics; work environment; workplace safety analysis; and workstation design. Papers are included entitled: A model for analyzing mining machine illumination systems' by R.L. Unger, A.F. Glowacki and E.W. Rossi, 'Ergonomic design guidelines for underground coal mining equipment by E.J. Conway and R. Unger, and Hot work environment and human strain - a relation proposed by K. Bhattacharya and S. Raja.

Participatory ergonomics intervention for improving work-related musculoskeletal disorders in the 'One Tambon One Product' industry in Thailand.

Science.gov (United States)

Hongsranagon, Prathurng; Somana, Yaowanit; Maha-Udomporn, Somkiet; Siriwong, Wattasit; Havanond, Piyalamporn; Deelertyuenyong, Nathawan; Petchprasit, Viroj; Munkatunyu, Nantawadee; Saksri, Pramrudee

2011-12-01

This paper relates to the first phase one of a three-phase study. Phase 1 investigated and identified risk factors for work-related musculoskeletal disorders (WMSDs) in 26 'One Tambon One Product' (OTOP) groups working in the informal sector. Data was collected from 93 participants in Khangkoi District, Saraburi Province, Thailand during 2009-2010. Results of inspections and direct observations of work places and interviews of managers and workers showed risk factors related to posture, repetition, force and duration in the workers' operations and the application of a checklist revealed that the OTOP groups had simple work processes. A knowledge-attitude-practice survey of managers and workers indicated that there was a moderate to high awareness regarding ergonomics and occupational safety and health principles and approximately 15% of workers reported WMSDs at a moderate level, mainly associated with lower back and shoulder pains, due to protracted periods of sitting. Specific recommendations in response to OTOP conditions and needs were made. The second phase of the study involves a participatory ergonomics worksite intervention by a number of stakeholders and the final phase deals with an evaluation of the intervention and an establishment of guidelines for ergonomics programs for OTOP groups.

Europe Chapter of the Human Factors and Ergonomics Society Meeting

National Research Council Canada - National Science Library

de

2002-01-01

The Final Proceedings for Europe Chapter of the Human Factors and Ergonomics Society Meeting, 7 November 2001 - 9 November 2001 This is an interdisciplinary conference in human factors and ergonomics...

Ergonomics evaluation as a powerful tool to redesign advanced interfaces of nuclear control rooms

International Nuclear Information System (INIS)

Santos, Isaac J.A.L. dos; Carvalho, Paulo V.R.; Oliveira, Mauro V.; Fernandes, Nelson; Oliveira, Helio C.L.; Grecco, Claudio H.S.; Mol, Antonio C.A.; Augusto, Silas C.; Teixeira, Douglas V.; Ferraz, Fernando T.

2007-01-01

Ergonomics is the scientific discipline concerned with the understanding of interactions among humans and other elements of a system. Ergonomics contributes to the design and evaluation of tasks, jobs, products, environments and systems in order to make them compatible with the needs, abilities and limitations of people. In the safe operation of nuclear power plant the performance of the control room crews plays an important role. In this respect, well-designed human-system interfaces (HSI) are crucial for safe and efficient operation of the plant, reducing the occurrence of incidents, accidents and the risks for human error. The aim of this paper is to describe a case study in which a methodological framework was applied to redesign advanced interfaces of a nuclear simulator. (author)

Bad Enough Ergonomics: A Case Study of an Office Chair

OpenAIRE

Peteri, Virve

2017-01-01

The article analyzes ergonomics as a social and cultural phenomenon, as something that is formulated and described by speakers in a specific social context; in a company that is specialized in producing ergonomic office furniture. Through a case study of an office chair, the article examines how ergonomics and its association with the vision of the potential users and their working spaces are constructed by the relevant actors in project meetings and individual interviews during the manufactu...

Eletrobras management program in ergonomics: the pursuit of excellence through maturity levels.

Science.gov (United States)

Pires, Paulo Roberto de Oliveira Bassil; Rezende, Fagner Fagundes

2012-01-01

Ergonomics for Eletrobras arose from the need in having an environment more suitable to the characteristics and circumstances of employees, in compliance with Regulation Standard no. 17 - Ergonomics (NR17) of the Ministry of Labor and Employment. Being a mixed economy company with regionalized anthropometric characteristics of its employees, the study of ergonomic adjustments and improvement of the concept of Ergonomics were and have been of great importance to the company's production environment. These advances have contributed to the development of specific technical criteria for the purchase of furniture and work tools (accessories), apart from their possible effects on the user. Ergonomics has been perceived as a technical-scientific tool, aimed to study labor interactions, new technologies and specific characteristics of the activities performed. To meet these demands a multidisciplinary Ergonomics Committee was created in Eletrobras, and effectively established the Ergonomics Management Program in the company; This program is marked by well-defined phases with great success in making use of these studies for other types of corporate activities and also facilitating the program control and its maturity levels, even at a business level.

Ergonomic analysis of primary and assistant surgical roles.

Science.gov (United States)

Zihni, Ahmed M; Cavallo, Jaime A; Ray, Shuddhadeb; Ohu, Ikechukwu; Cho, Sohyung; Awad, Michael M

2016-06-15

Laparoscopic surgery is associated with a high degree of ergonomic stress. However, the stress associated with surgical assisting is not known. In this study, we compare the ergonomic stress associated with primary and assistant surgical roles during laparoscopic surgery. We hypothesize that higher ergonomic stress will be detected in the primary operating surgeon when compared with the surgical assistant. One right-hand dominant attending surgeon performed 698 min of laparoscopic surgery over 13 procedures (222 min primary and 476 min assisting), whereas electromyography data were collected from bilateral biceps, triceps, deltoids, and trapezius muscles. Data were analyzed in 1-min segments. Average muscle activation as quantified by maximal voluntary contraction (%MVC) was calculated for each muscle group during primary surgery and assisting. We compared mean %MVC values with unpaired t-tests. Activation of right (R) biceps and triceps muscle groups is significantly elevated while operating when compared with assisting (R biceps primary: 5.47 ± 0.21 %MVC, assistant: 3.93 ± 0.11, P ergonomic differences between operating and assisting. Surgical assisting was associated with similar and occasionally higher levels of muscle activation compared with primary operating. These findings suggest that surgical assistants face significant ergonomic stress, just as operating surgeons do. Steps must be taken to recognize and mitigate this stress in both operating surgeons and assistants. Copyright © 2016 Elsevier Inc. All rights reserved.

Evaluation of a participatory ergonomics intervention in small commercial construction firms.

Science.gov (United States)

Dale, Ann Marie; Jaegers, Lisa; Welch, Laura; Gardner, Bethany T; Buchholz, Bryan; Weaver, Nancy; Evanoff, Bradley A

2016-06-01

Work-related musculoskeletal disorders (WMSD) among construction workers remain high. Participatory ergonomics (PE) interventions that engage workers and employers in reducing work injury risks have shown mixed results. Eight-six workers from seven contractors participated in a PE program. A logic model guided the process evaluation and summative evaluation of short-term and intermediate impacts and long-term outcomes from surveys and field records. Process measures showed good delivery of training, high worker engagement, and low contractor participation. Workers' knowledge improved and workers reported changes to work practices and tools used; contractor provision of appropriate equipment was low (33%). No changes were seen in symptoms or reported physical effort. The PE program produced many worker-identified ergonomic solutions, but lacked needed support from contractors. Future interventions should engage higher levels of the construction organizational system to improve contractor involvement for reducing WMSD. Am. J. Ind. Med. 59:465-475, 2016. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Effectiveness of computer ergonomics interventions for an engineering company: a program evaluation.

Science.gov (United States)

Goodman, Glenn; Landis, James; George, Christina; McGuire, Sheila; Shorter, Crystal; Sieminski, Michelle; Wilson, Tamika

2005-01-01

Ergonomic principles at the computer workstation may reduce the occurrence of work related injuries commonly associated with intensive computer use. A program implemented in 2001 by an occupational therapist and a physical therapist utilized these preventative measures with education about ergonomics, individualized evaluations of computer workstations, and recommendations for ergonomic and environmental changes. This study examined program outcomes and perceived effectiveness based on review of documents, interviews, and surveys of the employees and the plant manager. The program was deemed successful as shown by 59% of all therapist recommendations and 74% of ergonomic recommendations being implemented by the company, with an 85% satisfaction rate for the ergonomic interventions and an overall employee satisfaction rate of 70%. Eighty-one percent of the physical problems reported by employees were resolved to their satisfaction one year later. Successful implementation of ergonomics programs depend upon effective communication and education of the consumers, and the support, cooperation and collaboration of management and employees.

SME Worker Affective (SWA) index based on environmental ergonomics

Science.gov (United States)

Ushada, M.; Kusuma Aji, G.; Okayama, T.; Khidir, M.

2018-04-01

Small-Medium sized (SME) is a focal type of Indonesian industry which contributes to national emerging economies. Indonesian goverment has developed employee social security system (BPJS Ketenagakerjaan) to support worker quality of life. However, there were limited research which could assist BPJS Ketenagakerjaan in evaluating worker quality of life. Worker quality of life could be categorized as the highest worker needs or affective states. SME Worker Affective (SWA) index is being concerned as a basic tool to make balance between worker performance and quality of life in workstation of SMEs. The research objectives are: 1) To optimize the environmental ergonomics in SMEs; 2) To quantify SME Worker Affective (SWA) index based on optimized environmental ergonomics. The research advantage is to support Indonesian goverment in monitoring SMEs good practices to its worker quality of life. Simulated annealing optimized the heart rate and environmental ergonomics parameters. SWA index was determined based on comparison between optimized heart rate and environmental ergonomics parameters. SWA index were quantified for 380 data of worker. The evaluation indicated 51.3% worker in affective and 48.7% in non-affective condition. Research results indicated that stakeholders of SMEs should put more attention on environmental ergonomics and worker affective.

The good, the bad, and the future: on the archaeology of ergonomics.

Science.gov (United States)

Moray, Neville

2008-06-01

This article places the 50th anniversary edition of the Human Factors journal in a historical context. It is appropriate to celebrate the 50th anniversary of the founding of Human Factors and the Human Factors and Ergonomics Society, but in so doing, we celebrate only the recent history of ergonomics. By digging into the history of ergonomics, we can better understand the evolution of method, practice, and concepts in the human factors discipline. One develops a greater admiration for early practitioners of human factors and ergonomics, as well as the importance of history. Some satisfaction about the rise, evolution, and fall of ergonomic ideas is justified. "If I have seen further..." We can better define the starting point for the next 50 years.

Challenges in Risk Assessment: Quantitative Risk Assessment

OpenAIRE

Jacxsens, Liesbeth; Uyttendaele, Mieke; De Meulenaer, Bruno

2016-01-01

The process of risk analysis consists out of three components, risk assessment, risk management and risk communication. These components are internationally well spread by Codex Alimentarius Commission as being the basis for setting science based standards, criteria on food safety hazards, e.g. setting maximum limits of mycotoxins in foodstuffs. However, the technical component risk assessment is hard to elaborate and to understand. Key in a risk assessment is the translation of biological or...

Ergonomic design and evaluation of a diagnostic ultrasound transducer holder.

Science.gov (United States)

Ghasemi, Mohamad Sadegh; Hosseinzadeh, Payam; Zamani, Farhad; Ahmadpoor, Hossein; Dehghan, Naser

2017-12-01

Work-related musculoskeletal disorders (WMSDs) are injuries and disorders that affect the body's movement and musculoskeletal system. Awkward postures represent one of the major ergonomic risk factors that cause WMSDs among sonographers while working with an ultrasound transducer. This study aimed to design and evaluate a new holder for the ultrasound transducer. In the first phase a new holder was designed for the transducer, considering design principles. Evaluation of the new holder was then carried out by electrogoniometry and a locally perceived discomfort (LPD) scale. The application of design principles to the new holder resulted in an improvement of wrist posture and comfort. Wrist angles in extension, flexion, radial deviation and ulnar deviation were lower with utilization of the new holder. The severity of discomfort based on the LPD method in the two modes of work with and without the new holder was reported with values of 1.3 and 1.8, respectively (p ergonomics design principles was effective in minimizing wrist deviation and increasing comfort while working with the new holder.

Ergonomic assessment of the French and American position for laparoscopic cholecystectomy in the MIS Suite.

Science.gov (United States)

Kramp, Kelvin H; van Det, Marc J; Totte, Eric R; Hoff, Christiaan; Pierie, Jean-Pierre E N

2014-05-01

Cholecystectomy was one of the first surgical procedures to be performed with laparoscopy in the 1980s. Currently, two operation setups generally are used to perform a laparoscopic cholecystectomy: the French and the American position. In the French position, the patient lies in the lithotomy position, whereas in the American position, the patient lies supine with the left arm in abduction. To find an ergonomic difference between the two operation setups the movements of the surgeon's vertebral column were analyzed in a crossover study. The posture of the surgeon's vertebral column was recorded intraoperatively using an electromagnetic motion-tracking system with three sensors attached to the head and to the trunk at the levels of Th1 and S1. A three-dimensional posture analysis of the cervical and thoracolumbar spine was performed to evaluate four surgeons removing a gallbladder in the French and American position. The body angles assessed were flexion/extension of the cervical and thoracolumbar spine, axial rotation of the cervical and thoracolumbar spine, lateroflexion of the cervical and thoracolumbar spine, and the orientation of the head in the sagittal plane. For each body angle, the mean, the percentage of operation time within an ergonomic acceptable range, and the relative frequencies were calculated and compared. No statistical difference was observed in the mean body angles or in the percentages of operation time within an acceptable range between the French and the American position. The relative frequencies of the body angles might indicate a trend toward slight thoracolumbar flexion in the French position. In a modern dedicated minimally invasive surgery suite, the body posture of the neck and trunk and the orientation of the head did not differ significantly between the French and American position.

Good ergonomics and team diversity reduce absenteeism and errors in car manufacturing.

Science.gov (United States)

Fritzsche, Lars; Wegge, Jürgen; Schmauder, Martin; Kliegel, Matthias; Schmidt, Klaus-Helmut

2014-01-01

Prior research suggests that ergonomics work design and mixed teams (in age and gender) may compensate declines in certain abilities of ageing employees. This study investigates simultaneous effects of both team level factors on absenteeism and performance (error rates) over one year in a sample of 56 car assembly teams (N = 623). Results show that age was related to prolonged absenteeism and more mistakes in work planning, but not to overall performance. In comparison, high-physical workload was strongly associated with longer absenteeism and increased error rates. Furthermore, controlling for physical workload, age diversity was related to shorter absenteeism, and the presence of females in the team was associated with shorter absenteeism and better performance. In summary, this study suggests that both ergonomics work design and mixed team composition may compensate age-related productivity risks in manufacturing by maintaining the work ability of older employees and improving job quality.

Risk assessment related to manual handling on choosen work possition in foundry Alstom Power Sp. z o. o.

Directory of Open Access Journals (Sweden)

G. Kowal

2010-04-01

Full Text Available Manual handling remains one of the different types of transport inside working place, although technological progress and modernorganization of work. Manual transport as a transport inside working place is related to foundry industry. According to polish lawregulations employer has to give consideration to manual handling in professional risk assessment and introduce actions for manualhandling reduction. In Foundry Elblag case there is found that in many processes manual handling are made by workers. For example wecan choose melting processes (additives manual feeding, mixing and pulling metallurgical slag, etc. or fettling processes like grinding.Objective of that analysis was to define level of risk related to manual handling in work stand chosen and define activities impacted onrisk assessment result with biggest range. For risk reduction, technical and organizational solutions were shown (better ergonomically work stand, method of work and worker’s awareness about good practices. In this study methods related to manual handling risk assessment were described, focus on KIM method used in Foundry Elblag. Key Item Method allow to estimate the risk by simple calculation based on key indicators (time rating points, rating points of mass, posture or work condition. Points were chosen based on timekeeping, information from workers and foreman.

ERGONOMICS AND ROAD SAFETY

NARCIS (Netherlands)

BROOKHUIS, K; BROWN, [No Value

1992-01-01

Modifications to the design of vehicles and road infrastructures have improved road safety significantly over the past decades, but all such developments depend upon user acceptance and institutional backing for their success. New R&D programmes combining ergonomic and engineering approaches are

An ergonomic study on the biomechanical consequences in children, generated by the use of computers at school.

Science.gov (United States)

Paraizo, Claudia; de Moraes, Anamaria

2012-01-01

This research deals with the influence of the computer use in schools related to the children posture, in an ergonomic point of view. The research tries to identify probable causes for the children early postural constraints, relating it to the sedentary behavior and the lack of an ergonomic project in schools. The survey involved 186 children, between 8 and 12 years old, students of a private school in Rio de Janeiro-Brasil. An historical and theoretical school furniture research was conducted as well as a survey with the students and teachers, computer postural evaluation, ergonomic evaluation (RULA method), and observations in the computer classroom. The research dealt with the student's perception with respect to the furniture utilized by him in the classroom during the use of the computer, his body complaint, the time he spent working on the school computer and the possibility of the existence of sedentariness. Also deals with the teachers' perception and knowledge regarding ergonomics with reference to schoolroom furniture and its Regulatory Norms (RN). The purpose of the research work is to highlight the importance of this knowledge, having in view the possibility of the teachers' collaboration in the ergonomic adaptation of the classroom environment and in their conscientious opinion during the purchasing of this furniture. A questionnaire was utilized and its results showed some discontent on the part of the teachers with relation to the schoolroom furniture as well as the teachers' scant knowledge of Ergonomics.We conclude with a survey that despite the children had constraints in postural assessments and school furniture needs a major ergonomic action, the time that children use the computer at school is small compared with the time of use at home and therefore insufficient to be the main cause of quantified commitments, thus the study of computer use at home as a development and continuity of this research.

'1966 and all that': Trends and developments in UK ergonomics during the 1960s.

Science.gov (United States)

Waterson, Patrick; Eason, Ken

2009-11-01

The 1960s represents a key decade in the expansion of ergonomics within the UK. This paper reviews trends and developments that emerged out of the 1960s and compares these with ergonomics research and practice today. The focus in particular is on the expansion of ergonomics as a discipline within industry, as well as more specific topics, such as the emergence of areas of interest, for example, computers and technology, automation and systems ergonomics and consumer ergonomics. The account is illustrated with a detailed timeline of developments, a set of industrial case studies and the contents of important publications during the decade. A key aim of the paper is to provide the opportunity to reflect on the past and the implications this may have for future directions for ergonomics within the UK. The paper provides practitioners with an insight into the development of ergonomics in the UK during one of the most important decades of its history. This is especially relevant given the fact that in 2009 the Ergonomics Society celebrates its 60th anniversary.

Application of a mathematical model for ergonomics in lean manufacturing.

Science.gov (United States)

Botti, Lucia; Mora, Cristina; Regattieri, Alberto

2017-10-01

The data presented in this article are related to the research article "Integrating ergonomics and lean manufacturing principles in a hybrid assembly line" (Botti et al., 2017) [1]. The results refer to the application of the mathematical model for the design of lean processes in hybrid assembly lines, meeting both the lean principles and the ergonomic requirements for safe assembly work. Data show that the success of a lean strategy is possible when ergonomics of workers is a parameter of the assembly process design.

Macro Ergonomics Interventions and their Impact on Productivity and Reduction of Musculoskeletal disorders: Including a Case Study

Directory of Open Access Journals (Sweden)

N Sadra Abarqhouei

2012-11-01

Full Text Available   Background and aims : The present studies show that the theoretical discussions and the applications of ergonomics have not been seriously handled in our country, Iran. So, the aim of the current study was to present an appropriate method which could help in increasing the productivity and decreasing the risk factors of ergonomics in socio-technical systems.   Methods: During the present study, a theoretical model was developed to guide the “ergonomic intervention processes” and its evaluation and application was carried out for an educational organization (EO. The faculty members were selected as the subjects of statistical survey and simple random sampling was performed. The level of musculoskeletal disorders was evaluated in control and treatment groups. Comparative analysis of the obtained data was carried out using fuzzy numbers and their level of confinement.   Results: According to the results of present study with the help of ergonomic interventions, an increase in the activity of staff members, increased revenue, expansion of work with the least number of manpower and a decrease in the overall expenses was seen as compared to the base year. In addition, the analysis of questionnaires with fuzzy approach has shown that the level of musculoskeletal disorders in the experimental group was less as compared to that of control group.   Conclusion: The results obtained by the use of macro and micro ergonomic interventions (Total ergonomics have proved that these methods were successful by increasing the innovation and motivation of the staff members to solve the organizational problems as compared to the base year. The decrease of musculoskeletal disorders among the members resulted to an increase of performance in different units of the educational organization.  

Integrating ergonomics into production system development--the Volvo Powertrain case.

Science.gov (United States)

Neumann, W Patrick; Ekman, Marianne; Winkel, Jørgen

2009-05-01

Understanding the barriers and assists to integrating ergonomics into production system design remains a research issue. An action research case study at Volvo Powertrain/Sweden was conducted. Researchers worked collaboratively with the firm in efforts to improve the company's ability to handle ergonomics in their daily work of improving and developing production systems. Researchers observed and reflected collectively on the change process using field notes and recordings to support their observations. Observed integration barriers included both individual level issues like life events, and organisational aspects such as communication barriers between groups or assignment of tasks to people not involved in decision-making. Observed assists included the 'political reflective navigation' (c.f. Broberg, O., Hermund, I., 2004. The OHS consultant as a 'political reflective navigator' in technological change processes. International Journal of Industrial Ergonomics 33 (4), 315-326) by the project owner to find new ways to overcome barriers and anchor ergonomics into the organisation. While special 'ergonomics' groups did not survive long, progress was observed in including ergonomics in regular design groups. A cross-functional workshop that fostered discussion across organisational boundaries helped shift focus from retrofitting systems to future production systems and improve engagement of engineering teams. Progress was marked by both success and setbacks and full integration appears to require more than 2 years time. It is concluded that support by senior managers should include succession planning for personnel that are key to the change effort.

Development of an ergonomics guideline for the furniture manufacturing industry.

Science.gov (United States)

Mirka, Gary A

2005-03-01

Industry-specific ergonomics guidelines are an important component in the four-pronged approach to workplace ergonomics currently pursued by the United States Occupational Safety and Health Administration. The American Furniture Manufacturers Association has taken the initiative of developing such a guideline for its members. The result of this effort is the "AFMA Voluntary Ergonomics Guideline for the Furniture Manufacturing Industry", a document that includes basic information about ergonomics program components as well as a compilation of work-proven, ergonomics best practices as submitted by members of the furniture manufacturing community. This guideline was developed through an industry-research-government partnership and made strategic use of the unique attributes that each sector brought to this effort. Outlined in this paper are some of the characteristics of this partnership including, the roles played by each, the different motivations for pursuing the guideline, the challenges faced during the development of the document, the successes experienced in this process, as well as a proposed outline for measuring the effectiveness of this effort. The hope is that this summary, and some of the lessons learned contained herein, would be helpful to others considering the prospect of developing such a guideline for their industry.

Psychosocial and ergonomic survey of office and field jobs in a utility company.

Science.gov (United States)

Coelho, Denis A; Tavares, Carla S D; Lima, Tânia M; Lourenço, Miguel L

2017-08-04

The effect of different kinds of work on the psychosocial assessment of workers under the same management and organizational environment is investigated. A voluntary assessment in a utility company was carried out using the short version of the Copenhagen psychosocial questionnaire (CoPsoQ) on two occasions, 1.5 years apart. Initially, 25 office workers (11 men and 14 women) participated, while 14 of those workers (8 women and 6 men) participated in the second assessment together with 32 field workers. The sewage, water treatment and maintenance workers, totaling 32 men, also participated in a field ergonomics assessment using the Washington State Department of Labor and Industries field work ergonomic checklist. The longitudinal outlook was fairly stable, with sustained severe scores in many CoPsoQ subscales and intensification of severity of workers' control over work and esteem for men. A significantly higher esteem score resulted for field rather than office workers. Workers subjected to foul odors showed similar severity of psychosocial factors. For most psychosocial dimensions, the organizational design and management system in place, as well as the overall cultural environment in which it operates, create a much stronger and more decisive impact than job-specific factors.

Multilevel Comprehensive Evaluation and Decision Making of Ergonomics

Directory of Open Access Journals (Sweden)

Wen-jun Wang

2015-01-01

Full Text Available Due to the improvement of living standards, higher level of ergonomic performance is required for the products. As a result, the ergonomic evaluation has become one of the key points in the decisions making of modern products, especially the complex products. Aiming at improving the situation that the methods for ergonomic evaluation and decision making are one-sided and discrete, this paper proposed several methods for measuring multiply factors and data format of products and built a comprehensive evaluation and decision making system. In this system, the data supplied by soft hardware and specialists were calculated separately to gain the preliminary scores, and the preliminary scores were processed to get the final results for the decision making using the AHP-GRA analytic hierarchy process-gray relational analysis method proposed in this paper.

The potential of computer software that supports the diagnosis of workplace ergonomics in shaping health awareness

Science.gov (United States)

Lubkowska, Wioletta

2017-11-01

The growing prevalence of health problems among computer workstation workers has become one of the biggest threats to the overall health of our population. That is why many modern scientists are looking for ways and methods to prevent and reverse these negative trends. The purpose of this article is to present the potential for practical use of computer programs to design an ergonomic workplace and postural loads. These programs help configure the computer workstation correctly and adopt the correct body position during work, which reduces the risk of health problems. Creating visually attractive programs helps encourage and inspire those who work with a computer to introduce ergonomic solutions and reject the sedentary lifestyle.

Wrong postural hygiene and ergonomics in dental students of the University of Valencia (Spain) (part I).

Science.gov (United States)

Cervera-Espert, J; Pascual-Moscardó, A; Camps-Alemany, I

2018-02-01

Failure to adopt a correct working posture can lead to occupational diseases. Evaluate knowledge in relation to ergonomics about BHOP concept and its application to routine clinical practice amongst undergraduate and postgraduate dental students in the University of Valencia (Valencia, Spain). A study based on interviews of undergraduate and postgraduate dental students in the University of Valencia (Valencia, Spain) was carried out. The information from a total of 336 interviews was used for the statistical analysis, differentiating according to gender and academic year: knowledge of ergonomics, pain prevalence and antecedents, assessment of the possible necessity for improved training in ergonomics, and evaluation of postural hygiene. Only 28.6% of the students were found to sit correctly in the dentist chair. Furthermore, in the opinion of the students, very few subjects during the career afforded adequate teaching in relation to ergonomics and working posture. The analysis of postural hygiene showed great variability. There were no significant differences in posture between males and females, although some incorrect postures appeared to be associated with the academic year (Ppostural hygiene were noted on progressing from one academic year to the next. The students in our study were not familiar with the principles of ergonomics and did not sit correctly in the dentist chair. Improved training in this field is required in dental school. © 2017 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

An economic evaluation of a participatory ergonomics process in an auto parts manufacturer.

Science.gov (United States)

Tompa, Emile; Dolinschi, Roman; Laing, Andrew

2009-01-01

We assess the costs and consequences of a participatory ergonomics process at a Canadian car parts manufacturer from the perspective of the firm. Regression modeling was used with interrupted time series data to assess the impact of the process on several health measures. Consequences were kept in natural units for cost-effectiveness analysis, and translated into monetary units for cost-benefit analysis. The duration of disability insurance claims and the number of denied workers' compensation claims was significantly reduced. The cost-effectiveness ratio is $12.06 per disability day averted. The net present value is $244,416 for a 23-month period with a benefit-to-cost ratio of 10.6, suggesting that the process was worth undertaking (monetary units in 2001 Canadian dollars). Our findings emphasize the importance of considering a range of outcomes when evaluating an occupational health and safety intervention. Participatory ergonomics process can be cost-effective for a firm.

Participatory ergonomics and new work: reducing neck complaints in assembling

NARCIS (Netherlands)

Migueza, S.A.; Hallbeck, M.S.; Vink, P.

2012-01-01

A participatory ergonomics approach is used to create a new work environment, which is aimed at reducing neck complaints in a cell phone assembly. The participatory ergonomics program included an initiative, problem identification, a selection of solutions, an implementation and evaluation.

Ergonomics as a missing part of sustainability.

Science.gov (United States)

Pavlovic-Veselinovic, Sonja

2014-01-01

In the last twenty years, terms such as sustainable development, environmental protection, and sustainable design have been widely exploited, often without justification. Does ergonomics have a legitimate need or right to use these terms and to be the part of the process to which they refer? This paper discusses the relationship between ergonomics and the concept of sustainable development and its three elements of sustainability (environmental, social and economic), as the steps ergonomists need to take to secure and strengthen the influence in sustainability topics.

Swedish Sonographers' perceptions of ergonomic problems at work and their suggestions for improvement.

Science.gov (United States)

Gemark Simonsen, Jenny; Gard, Gunvor

2016-09-15

Sonographers' perceptions of ergonomic and work-related pain problems at work have so far mostly been researched in quantitative studies by questionnaires. There is a need of experience-based research to deepen the knowledge about how sonographers perceive ergonomic problems at work. Therefore, the aim of this qualitative study was to describe sonographers' perceptions of ergonomic problems at work, and their suggestions for improvement strategies. Twenty-two female sonographers were individually interviewed regarding different aspects of their physical working environment. Content analysis was applied. The sonographers perceived different ergonomic problems in their working environment, but to offer patient comfort and to obtain the best possible images were often prioritized over working posture. Echocardiography was considered demanding as the examination is performed with little variation in posture. Ergonomic improvements included reducing the manual handling of the transducer, optimizing the adjustability of equipment, and taking the patient's physique and health into account. As some examinations were perceived to be more ergonomically demanding, variation between examinations was suggested, however, this requires broader skills. Sonography, especially echocardiography is ergonomically demanding but the improvement strategies suggested were perceived useful and applicable.

Meeting diversity in ergonomics

NARCIS (Netherlands)

Looze, M.P. de; Pikaar, R.

2006-01-01

The plenary lectures from the 16th World Congress on Ergonomics, Maastricht, July 10-14, 2006, have been documented in this special issue. Its theme was ‘Meeting Diversity'. The contributions, ranging from scientific papers to technical notes or short statements, cover different aspects of the

Ergonomics issues in national identity card for homeland security.

Science.gov (United States)

Yeow, Paul H P; Yuen, Y Y; Loo, W H

2013-09-01

Ever since the 9/11 terrorist attack, many countries are considering the use of smart national identity card (SNIC) which has the ability to identify terrorists due to its biometric verification function. However, there are many ergonomics issues in the use of SNIC, e.g. card credibility. This research presents a case study survey of Malaysian users. Although most citizens (>96%) own MyKad (Malaysia SNIC), many do not carry it around and use its applications. This defeats one of its main purposes, i.e. combating terrorism. Thus, the research investigates ergonomics issues affecting the citizens' Intention to Use (ITU) MyKad for homeland security by using an extended technology acceptance model. Five hundred questionnaires were collected and analysed using structural equation modelling. Results show that perceived credibility and performance expectancy are the key issues. The findings provide many countries with insights into methods of addressing ergonomics issues and increasing adoption of SNIC for homeland security. Copyright © 2012 Elsevier Ltd and The Ergonomics Society. All rights reserved.

Prevalence of Musculoskeletal Symptoms among teachers and their ergonomic conditions

Directory of Open Access Journals (Sweden)

Jerônimo Costa Branco

2012-03-01

Full Text Available Objective: To verify the prevalence of musculoskeletal symptoms and evaluate ergonomic conditions among teachers. Methods: A quantitative, observational and cross-sectional study held in the city of Pelotas-RS, Brazil, in the period of November to December 2009. The sample was composed by 320 teachers in 6 schools. Research was accomplished by means of a socialdemographic questionnaire, a check-list for ergonomic evaluation, and the Nordic questionnaire, applied in order to evaluate the ostheomuscular symptoms. Results:287 (89,7% teachers referred some symptom in the last 12 months. The most affected areas were: shoulders 177 (61,6%, thoracic column 173 (60,2% and cervical spine 163 (56,7%. Ergonomic condition of the workplace was considered unsatisfactory by the teachers. Conclusion: Ostheomuscular symptoms were found in high prevalence among teachersin Pelotas, whose ergonomic conditions are considered inappropriate, standing out the vertebral column as the most affected body part.

Ergonomic evaluation model of operational room based on team performance

Directory of Open Access Journals (Sweden)

YANG Zhiyi

2017-05-01

Full Text Available A theoretical calculation model based on the ergonomic evaluation of team performance was proposed in order to carry out the ergonomic evaluation of the layout design schemes of the action station in a multitasking operational room. This model was constructed in order to calculate and compare the theoretical value of team performance in multiple layout schemes by considering such substantial influential factors as frequency of communication, distance, angle, importance, human cognitive characteristics and so on. An experiment was finally conducted to verify the proposed model under the criteria of completion time and accuracy rating. As illustrated by the experiment results,the proposed approach is conductive to the prediction and ergonomic evaluation of the layout design schemes of the action station during early design stages,and provides a new theoretical method for the ergonomic evaluation,selection and optimization design of layout design schemes.

Contextual factors affecting task distribution in two participatory ergonomic interventions: a qualitative study.

Science.gov (United States)

Dixon, Shane Michael; Theberge, Nancy

2011-11-01

This article provides an analysis of the evolution of the division of labour in participatory ergonomics (PE) programmes in two worksites. The analysis is based on interviews and field observations in the worksites. In both settings there was meaningful participation by both worker and management members of ergonomic change teams (ECTs) in the hazard assessment and solution identification stages, but as the teams moved to the implementation stage, worker representatives were marginalised and the participatory nature of the programmes was severely curtailed. The removal of workers from the process was the outcome of the interplay among the type of activities pursued in the implementation stage, the skills and knowledge required to carry out those activities, and workers' limited influence in the organisational hierarchies. Findings highlight the salience of the social context in which participatory programmes are located and the importance of examining participatory programmes as they evolve over time. STATEMENT OF RELEVANCE: This article contributes to a growing literature on the process and implementation of PE programmes. The article's focus on social and organisational factors that affect the division of labour and attention to the evolution of involvement over time extend current understandings of participation in ergonomics programmes.

An effective model for ergonomic optimization applied to a new automotive assembly line

Energy Technology Data Exchange (ETDEWEB)

Duraccio, Vincenzo [University Niccolò Cusano, Rome Via Don Gnocchi,00166, Roma Italy (Italy); Elia, Valerio [Dept. of Innovation Engineering - University of Salento Via Monteroni, 73100, Lecce (Italy); Forcina, Antonio [University Parthenope, Dep. of Engineering Centro Direzionale - Isola C4 80143 - Naples - Italy (Italy)

2016-06-08

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

An effective model for ergonomic optimization applied to a new automotive assembly line

International Nuclear Information System (INIS)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-01-01

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

An effective model for ergonomic optimization applied to a new automotive assembly line

Science.gov (United States)

Duraccio, Vincenzo; Elia, Valerio; Forcina, Antonio

2016-06-01

An efficient ergonomic optimization can lead to a significant improvement in production performance and a considerable reduction of costs. In the present paper new model for ergonomic optimization is proposed. The new approach is based on the criteria defined by National Institute of Occupational Safety and Health and, adapted to Italian legislation. The proposed model provides an ergonomic optimization, by analyzing ergonomic relations between manual work in correct conditions. The model includes a schematic and systematic analysis method of the operations, and identifies all possible ergonomic aspects to be evaluated. The proposed approach has been applied to an automotive assembly line, where the operation repeatability makes the optimization fundamental. The proposed application clearly demonstrates the effectiveness of the new approach.

The Research of Computer Aided Farm Machinery Designing Method Based on Ergonomics

Science.gov (United States)

Gao, Xiyin; Li, Xinling; Song, Qiang; Zheng, Ying

Along with agricultural economy development, the farm machinery product type Increases gradually, the ergonomics question is also getting more and more prominent. The widespread application of computer aided machinery design makes it possible that farm machinery design is intuitive, flexible and convenient. At present, because the developed computer aided ergonomics software has not suitable human body database, which is needed in view of farm machinery design in China, the farm machinery design have deviation in ergonomics analysis. This article puts forward that using the open database interface procedure in CATIA to establish human body database which aims at the farm machinery design, and reading the human body data to ergonomics module of CATIA can product practical application virtual body, using human posture analysis and human activity analysis module to analysis the ergonomics in farm machinery, thus computer aided farm machinery designing method based on engineering can be realized.

Editorial | Scott | Ergonomics SA

African Journals Online (AJOL)

Ergonomics SA. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 23, No 1 (2011) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT ...

The impact of ergonomics

NARCIS (Netherlands)

Koningsveld, E.A.P.

2009-01-01

Ergonomists offer services to organizations. The goal of their work is to provide safety and health at work in combination with a sound human performance. However, the impact of ergonomics efforts is not always as good as ergonomists and human factors specialists want. This chapter aims to support

Ergonomics as a tool to improve the sustainability of the workforce.

Science.gov (United States)

Meyer, Felipe; Eweje, Gabriel; Tappin, David

2017-01-01

The sustainability of the workforce is threatened due to working conditions. One of the reasons for this is an imbalance between the working conditions and the capacity of the workers. The objective of the paper, based on a literature review, is to explore the relationship between two main concepts, beginning with sustainability, and finished with ergonomics. Based on that relationship, determine if ergonomics could be helpful to improve the sustainability of the workforce. Literature review was based on two keywords: sustainability and ergonomics. The focus was on create a theoretical path between these two concepts. The literature review draws on 100 journal articles, books, conference proceedings, thesis and reports. The results of the literature review highlights that an ergonomics approach is helpful and appropriate to determine the mismatch between people capacity and system demand. In that sense, the literature review reveals that both disciplines, ergonomics and sustainability, share the same principles and that the mix of both has significant potential. However, the literature also shows a lack of empirical information that proves that potential. The review first posits that sustainability principles could be helpful to improve the working conditions, and second, that an ergonomics approach provides information related with working conditions, organizations' problems and the needs of workers that would be helpful to create a sustainability workforce.

Evaluation of an ergonomics intervention among Nicaraguan coffee harvesting workers.

Science.gov (United States)

Bao, Stephen; Silverstein, Barbara; Stewart, Kate

2013-01-01

This study evaluated an ergonomics intervention among Nicaraguan coffee harvesting workers, using electromyography and questionnaire survey techniques. Nicaraguan researchers were involved in the study so that they could gain hands-on experience with ergonomics research and applications, and eventually be the specialists conducting ergonomics interventions in Nicaraguan workplaces. Coffee harvesting activities were studied individually and physical hazards were identified accordingly. The results showed decreased muscle loading on the erector spinae muscle and improved comfort reporting in the back region compared to the commonly used baskets. This fulfils the design objective of a newly developed bag that was used in the intervention to reduce physical workload on the coffee harvesting workers. Workers' opinion survey results showed some issues related to the size of the new bag and the lumbar-shoulder belt mechanism. This information can be used in the modification of the bag in the next design. Key players in the process have been identified. Stimulating ergonomics activities in developing countries is suggested by many experts. This study provided an example from coffee workers in Nicaragua. Commonly used job evaluation procedures and physical load quantification methods were used. Ergonomics researchers and practitioners in developing countries may do similar projects on their own in the future.

Physical Strain and Work Ergonomics in Farmers with Disabilities.

Science.gov (United States)

Nevala-Puranen, Nina; Sörensen, Lars

1997-01-01

In agriculture, occupational injuries are common, and several of them lead to permanent physical disability. The objective of this case study was to assess the strain and the ergonomic needs of four farmers (aged 34-49 years) with physical disabilities. A maximal bicycle ergometer test or an arm-crank test was done to assess their maximal heart rate (HR max ) and maximal oxygen consumption (V0 2max ). The strain at work was analyzed by measuring heart rate (HR), muscle activity (EMG), and the rating of perceived exertion (RPE). The farmers were interviewed as to possible and impossible work tasks and the ergonomic redesign measures taken to improve the work environment. The work tasks performed were mainly light or moderate work for the cardiorespiratory system according to mean HR (88-102 beats/min), the percentage of HR range (17-31% HRR), and the relative V0 2 (22-46% V0 2max ). The mean activity of the trapezius muscles was 0.4-9% of the maximal voluntary contraction (%MVC). All the participants had work tasks they were unable to perform. They had made ergonomie redesign changes mainly to the tractor. This case study showed that some agricultural work tasks were possible for farmers with physical disabilities and that the physical strain associated with these tasks was mainly light or moderate.

Ergonomic design and evaluation of the handle for an endoscopic dissector.

Science.gov (United States)

Shimomura, Yoshihiro; Minowa, Keita; Kawahira, Hiroshi; Katsuura, Tetsuo

2016-05-01

The purpose of this study was to design an endoscopic dissector handle and objectively assess its usability. The handles were designed with increased contact area between the fingers and thumb and the eye rings, and the eye rings were modified to have a more perpendicular insertion angle to the finger midline. Four different handle models were compared, including a conventional product. Subjects performed dissection, exclusion, grasping, precision manipulation and precision handling tasks. Electromyography and subjective evaluations were measured. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability. The activity of the first dorsal interosseous muscle was sometimes influenced by the shape of the other parts. The ergonomically designed endoscopic dissector handle used in this study achieved high usability. Medical instrument designs based on ergonomic concepts should be assessed with objective indices. Practitioner Summary: The endoscopic dissector handles were designed with increased contact area and more suitable insertion angle between the fingers and thumb and the eye rings. Compared to conventional handles, the designated handle reduced the muscle load in the extensor and flexor muscles of the forearm and increased subjective stability.

Ergonomics in Healthcare system-Human Factors models: a review article

Directory of Open Access Journals (Sweden)

S. Tarzimoghadam

2015-12-01

  Conclusion: Most of the published studies emphasize on application of ergonomic models in healthcare centers since these models may reduce their problems. These ergonomics approaches support patient-centered treatment processes, user-oriented design of medical environments, efficient utilization of resources and increase motivation of clinical staff.

The Physical Demands and Ergonomics of Working with Young Children.

Science.gov (United States)

Gratz, Rene R.; Claffey, Anne; King, Phyllis; Scheuer, Gina

2002-01-01

Examines the physical demands and ergonomic concerns within child care settings. Discusses problem areas and ergonomic recommendations for room design and staff training. Presents important implications for writing job descriptions, determining essential job functions, orienting and training staff, and committing to improving the child care work…

ERGONOMICS ABSTRACTS 48983-49619.

Science.gov (United States)

Ministry of Technology, London (England). Warren Spring Lab.

THE LITERATURE OF ERGONOMICS, OR BIOTECHNOLOGY, IS CLASSIFIED INTO 15 AREAS--METHODS, SYSTEMS OF MEN AND MACHINES, VISUAL AND AUDITORY AND OTHER INPUTS AND PROCESSES, INPUT CHANNELS, BODY MEASUREMENTS, DESIGN OF CONTROLS AND INTEGRATION WITH DISPLAYS, LAYOUT OF PANELS AND CONSOLES, DESIGN OF WORK SPACE, CLOTHING AND PERSONAL EQUIPMENT, SPECIAL…

The Ergonomics of Human Space Flight: NASA Vehicles and Spacesuits

Science.gov (United States)

Reid, Christopher R.; Rajulu, Sudhakar

2014-01-01

Space...the final frontier...these are the voyages of the starship...wait, wait, wait...that's not right...let's try that again. NASA is currently focusing on developing multiple strategies to prepare humans for a future trip to Mars. This includes (1) learning and characterizing the human system while in the weightlessness of low earth orbit on the International Space Station and (2) seeding the creation of commercial inspired vehicles by providing guidance and funding to US companies. At the same time, NASA is slowly leading the efforts of reestablishing human deep space travel through the development of the Multi-Purpose Crew Vehicle (MPCV) known as Orion and the Space Launch System (SLS) with the interim aim of visiting and exploring an asteroid. Without Earth's gravity, current and future human space travel exposes humans to micro- and partial gravity conditions, which are known to force the body to adapt both physically and physiologically. Without the protection of Earth's atmosphere, space is hazardous to most living organisms. To protect themselves from these difficult conditions, Astronauts utilize pressurized spacesuits for both intravehicular travel and extravehicular activities (EVAs). Ensuring a safe living and working environment for space missions requires the creativity of scientists and engineers to assess and mitigate potential risks through engineering designs. The discipline of human factors and ergonomics at NASA is critical in making sure these designs are not just functionally designed for people to use, but are optimally designed to work within the capacities specific to the Astronaut Corps. This lecture will review both current and future NASA vehicles and spacesuits while providing an ergonomic perspective using case studies that were and are being carried out by the Anthropometry and Biomechanics Facility (ABF) at NASA's Johnson Space Center.

Reducing work-related Musculoskeletal Disorders (MSDs) through design: Views of ergonomics and design practitioners.

Science.gov (United States)

Punchihewa, Himan K G; Gyi, Diane E

2015-01-01

Work-related Musculoskeletal Disorders (MSDs) affect the well-being of workers. Unfortunately, user requirements for design to reduce workplace risk factors for MSDs are not always effectively communicated to designers creating a mismatch between the user requirements and what is ultimately produced. To understand the views of practitioners of design and ergonomics regarding tools for participatory design and features they would like to see in such tools. An online questionnaire survey was conducted with a cohort of practitioners of ergonomics and design (n = 32). In-depth interviews were then conducted with a subset of these practitioners (n = 8). To facilitate discussion, a prototype integrated design tool was developed and demonstrated to practitioners using a verbalized walkthrough approach. According to the results of the questionnaire survey, the majority (70%) believed an integrated approach to participatory design would help reduce work-related MSDs and suggested ways to achieve this, for example, through sharing design information. The interviews showed the majority (n = 7) valued being provided with guidance on design activities and ways to manage and present information. It is believed that an integrated approach to design in order to help reduce work-related MSDs is highly important and a provision to evaluate design solutions would be desirable for practitioners of design and ergonomics.