Directory of Open Access Journals (Sweden)
Richard J Giannone
Full Text Available Nanoarchaeum equitans, the only cultured representative of the Nanoarchaeota, is dependent on direct physical contact with its host, the hyperthermophile Ignicoccus hospitalis. The molecular mechanisms that enable this relationship are unknown. Using whole-cell proteomics, differences in the relative abundance of >75% of predicted protein-coding genes from both Archaea were measured to identify the specific response of I. hospitalis to the presence of N. equitans on its surface. A purified N. equitans sample was also analyzed for evidence of interspecies protein transfer. The depth of cellular proteome coverage achieved here is amongst the highest reported for any organism. Based on changes in the proteome under the specific conditions of this study, I. hospitalis reacts to N. equitans by curtailing genetic information processing (replication, transcription in lieu of intensifying its energetic, protein processing and cellular membrane functions. We found no evidence of significant Ignicoccus biosynthetic enzymes being transported to N. equitans. These results suggest that, under laboratory conditions, N. equitans diverts some of its host's metabolism and cell cycle control to compensate for its own metabolic shortcomings, thus appearing to be entirely dependent on small, transferable metabolites and energetic precursors from I. hospitalis.
Rawle, Rachel A; Hamerly, Timothy; Tripet, Brian P; Giannone, Richard J; Wurch, Louie; Hettich, Robert L; Podar, Mircea; Copié, Valerie; Bothner, Brian
2017-09-01
Studies of interspecies interactions are inherently difficult due to the complex mechanisms which enable these relationships. A model system for studying interspecies interactions is the marine hyperthermophiles Ignicoccus hospitalis and Nanoarchaeum equitans. Recent independently-conducted 'omics' analyses have generated insights into the molecular factors modulating this association. However, significant questions remain about the nature of the interactions between these archaea. We jointly analyzed multiple levels of omics datasets obtained from published, independent transcriptomics, proteomics, and metabolomics analyses. DAVID identified functionally-related groups enriched when I. hospitalis is grown alone or in co-culture with N. equitans. Enriched molecular pathways were subsequently visualized using interaction maps generated using STRING. Key findings of our multi-level omics analysis indicated that I. hospitalis provides precursors to N. equitans for energy metabolism. Analysis indicated an overall reduction in diversity of metabolic precursors in the I. hospitalis-N. equitans co-culture, which has been connected to the differential use of ribosomal subunits and was previously unnoticed. We also identified differences in precursors linked to amino acid metabolism, NADH metabolism, and carbon fixation, providing new insights into the metabolic adaptions of I. hospitalis enabling the growth of N. equitans. This multi-omics analysis builds upon previously identified cellular patterns while offering new insights into mechanisms that enable the I. hospitalis-N. equitans association. Our study applies statistical and visualization techniques to a mixed-source omics dataset to yield a more global insight into a complex system, that was not readily discernable from separate omics studies. Copyright © 2017 Elsevier B.V. All rights reserved.
Hamerly, Timothy; Tripet, Brian P; Tigges, Michelle; Giannone, Richard J; Wurch, Louie; Hettich, Robert L; Podar, Mircea; Copié, Valerie; Bothner, Brian
2015-08-01
Interspecies interactions are the basis of microbial community formation and infectious diseases. Systems biology enables the construction of complex models describing such interactions, leading to a better understanding of disease states and communities. However, before interactions between complex organisms can be understood, metabolic and energetic implications of simpler real-world host-microbe systems must be worked out. To this effect, untargeted metabolomics experiments were conducted and integrated with proteomics data to characterize key molecular-level interactions between two hyperthermophilic microbial species, both of which have reduced genomes. Metabolic changes and transfer of metabolites between the archaea Ignicoccus hospitalis and Nanoarcheum equitans were investigated using integrated LC-MS and NMR metabolomics. The study of such a system is challenging, as no genetic tools are available, growth in the laboratory is challenging, and mechanisms by which they interact are unknown. Together with information about relative enzyme levels obtained from shotgun proteomics, the metabolomics data provided useful insights into metabolic pathways and cellular networks of I. hospitalis that are impacted by the presence of N. equitans , including arginine, isoleucine, and CTP biosynthesis. On the organismal level, the data indicate that N. equitans exploits metabolites generated by I. hospitalis to satisfy its own metabolic needs. This finding is based on N. equitans 's consumption of a significant fraction of the metabolite pool in I. hospitalis that cannot solely be attributed to increased biomass production for N. equitans . Combining LC-MS and NMR metabolomics datasets improved coverage of the metabolome and enhanced the identification and quantitation of cellular metabolites.
A genomic analysis of the archael system Ignicoccus hospitalis-Nanoarchaeum equitans
Energy Technology Data Exchange (ETDEWEB)
Sun, Hui; Anderson, Iain; Makarova, Kira S.; Elkins, James G.; Ivanova, Natalia; Wall, Mark A.; Lykidis, Athanasios; Mavromatis, Konstantinos; Podar, Mircea; Hudson, Matthew E.; Chen, Wenqiong; Deciu, Cosmin; Hutchinson, Don; Eads, Jonathan R.; Anderson, Abraham; Fernandes, Fillipe; Szeto, Ernest; Lapidus, Alla; Kyrpides, NikosC.; Saier Jr., Milton G.; Richardson, Paul M.; Rachel, Reinhard; Huber, Harald; Eisen, Jonathan A.; Koonin, Eugene V.; Keller, Martin; Stetter, Karl O.
2008-09-01
BACKGROUND: The relationship between the hyperthermophiles Ignicoccus hospitalis and Nanoarchaeum equitans is the only known example of a specific association between two species of Archaea. Little is known about the mechanisms that enable this relationship. RESULTS: We sequenced the complete genome of I. hospitalis and found it to be the smallest among independent, free-living organisms. A comparative genomic reconstruction suggests that the I. hospitalis lineage has lost most of the genes associated with a heterotrophic metabolism that is characteristic of most of the Crenarchaeota. A streamlined genome is also suggested by a low frequency of paralogs and fragmentation of many operons. However, this process appears to be partially balanced by lateral gene transfer from archaeal and bacterial sources. CONCLUSIONS: A combination of genomic and cellular features suggests highly efficient adaptation to the low energy yield of sulfur-hydrogen respiration and efficient inorganic carbon and nitrogen assimilation. Evidence of lateral gene exchange between N. equitans and I. hospitalis indicates that the relationship has impacted both genomes. This association is the simplest symbiotic system known to date and a unique model for studying mechanisms of interspecific relationships at the genomic and metabolic levels.
Directory of Open Access Journals (Sweden)
Marcin Olszewski
Full Text Available DNA polymerases are present in all organisms and are important enzymes that synthesise DNA molecules. They are used in various fields of science, predominantly as essential components for in vitro DNA syntheses, known as PCR. Modern diagnostics, molecular biology and genetic engineering need DNA polymerases which demonstrate improved performance. This study was aimed at obtaining a new NeqSSB-TaqS fusion DNA polymerase from the Taq DNA Stoffel domain and a single-stranded DNA binding-like protein of Nanoarchaeum equitans in order to significantly improve the properties of DNA polymerase. The DNA coding sequence of Taq Stoffel DNA polymerase and the nonspecific DNA-binding protein of Nanoarchaeum equitans (NeqSSB-like protein were fused. A novel recombinant gene was obtained which was cloned into the pET-30 Ek/LIC vector and introduced into E. coli for expression. The recombinant enzyme was purified and its enzymatic properties including DNA polymerase activity, PCR amplification rate, thermostability, processivity and resistance to inhibitors, were tested. The yield of the target protein reached approximately 18 mg/l after 24 h of the IPTG induction. The specific activity of the polymerase was 2200 U/mg. The recombinant NeqSSB-TaqS exhibited a much higher extension rate (1000 bp template in 20 s, processivity (19 nt, thermostability (half-life 35 min at 95°C and higher tolerance to PCR inhibitors (0.3-1.25% of whole blood, 0.84-13.5 μg of lactoferrin and 4.7-150 ng of heparin than Taq Stoffel DNA polymerase. Furthermore, our studies show that NeqSSB-TaqS DNA polymerase has a high level of flexibility in relation to Mg2+ ions (from 1 to 5 mM and KCl or (NH42SO4 salts (more than 60 mM and 40 mM, respectively. Using NeqSSB-TaqS DNA polymerase instead of the Taq DNA polymerase could be a better choice in many PCR applications.
A New Method of Creating Technology/Function Matrix for Systematic Innovation without Expert
Directory of Open Access Journals (Sweden)
Tien-Yuan Cheng
2012-02-01
Full Text Available The technology/function matrix is comprised by specific technologies and functions, and through the technology/function matrix we can known what the technologies with functions have opportunities for innovation of product or technology. However, the technology/function matrix is very difficult to create, because the patents need to be read, analyzed and categorized into the technology/function matrix always more than hundreds or thousands. In this research, I propose a method to create a technology/function matrix just need to execute patent search without reading and analyzing patents. Through the proposed method anyone can create a technology/function matrix in a short time without experts’ help even if there are thousands of thousands of patents need to be read and analyzed.
Implement the medical group revenue function. Create competitive advantage.
Colucci, C
1998-01-01
This article shows medical groups how they can employ new financial management and information technology techniques to safeguard their revenue and income streams. These managerial techniques stem from the application of the medical group revenue function, which is defined herein. This article also describes how the medical group revenue function can be used to create value by employing a database and a decision support system. Finally, the article describes how the decision support system can be used to create competitive advantage. Through the wise use of internally generated information, medical groups can negotiate better contract terms, improve their operations, cut their costs, embark on capital investment programs and improve market share. As medical groups gain market power by improving in these areas, they will be more attractive to potential strategic allies, payers and investment bankers.
The tree of life might be rooted in the branch leading to Nanoarchaeota.
Di Giulio, Massimo
2007-10-15
It is suggested that the tree of life might be rooted in the domain of the Archaea, in the branch leading to the phylum of Nanoarchaeota. This hypothesis seems to be corroborated by the uniqueness and ancestrality of some traits possessed by Nanoarchaeum equitans, such as split genes separately codifying for the 5' and 3' halves of the tRNA molecule. These half genes are the oldest ancestral form of gene we have ever seen. This, along with the absence of operons from the genome of N. equitans, would seem to indicate that this genome is a molecular fossil of the evolutionary stage which the ancestral genomes had reached when the first lines of divergence were established. Moreover, the late appearance of DNA coinciding with the rooting of the universal phylogenetic tree would make the genome of N. equitans a witness to this fundamental event.
Podar, Mircea; Makarova, Kira S; Graham, David E; Wolf, Yuri I; Koonin, Eugene V; Reysenbach, Anna-Louise
2013-04-22
A single cultured marine organism, Nanoarchaeum equitans, represents the Nanoarchaeota branch of symbiotic Archaea, with a highly reduced genome and unusual features such as multiple split genes. The first terrestrial hyperthermophilic member of the Nanoarchaeota was collected from Obsidian Pool, a thermal feature in Yellowstone National Park, separated by single cell isolation, and sequenced together with its putative host, a Sulfolobales archaeon. Both the new Nanoarchaeota (Nst1) and N. equitans lack most biosynthetic capabilities, and phylogenetic analysis of ribosomal RNA and protein sequences indicates that the two form a deep-branching archaeal lineage. However, the Nst1 genome is more than 20% larger, and encodes a complete gluconeogenesis pathway as well as the full complement of archaeal flagellum proteins. With a larger genome, a smaller repertoire of split protein encoding genes and no split non-contiguous tRNAs, Nst1 appears to have experienced less severe genome reduction than N. equitans. These findings imply that, rather than representing ancestral characters, the extremely compact genomes and multiple split genes of Nanoarchaeota are derived characters associated with their symbiotic or parasitic lifestyle. The inferred host of Nst1 is potentially autotrophic, with a streamlined genome and simplified central and energetic metabolism as compared to other Sulfolobales. Comparison of the N. equitans and Nst1 genomes suggests that the marine and terrestrial lineages of Nanoarchaeota share a common ancestor that was already a symbiont of another archaeon. The two distinct Nanoarchaeota-host genomic data sets offer novel insights into the evolution of archaeal symbiosis and parasitism, enabling further studies of the cellular and molecular mechanisms of these relationships. This article was reviewed by Patrick Forterre, Bettina Siebers (nominated by Michael Galperin) and Purification Lopez-Garcia.
Creating Stiff, Tough, and Functional Hydrogel Composites with Low-Melting-Point Alloys.
Takahashi, Riku; Sun, Tao Lin; Saruwatari, Yoshiyuki; Kurokawa, Takayuki; King, Daniel R; Gong, Jian Ping
2018-04-01
Reinforcing hydrogels with a rigid scaffold is a promising method to greatly expand the mechanical and physical properties of hydrogels. One of the challenges of creating hydrogel composites is the significant stress that occurs due to swelling mismatch between the water-swollen hydrogel matrix and the rigid skeleton in aqueous media. This stress can cause physical deformation (wrinkling, buckling, or fracture), preventing the fabrication of robust composites. Here, a simple yet versatile method is introduced to create "macroscale" hydrogel composites, by utilizing a rigid reinforcing phase that can relieve stress-induced deformation. A low-melting-point alloy that can transform from a load-bearing solid state to a free-deformable liquid state at relatively low temperature is used as a reinforcing skeleton, which enables the release of any swelling mismatch, regardless of the matrix swelling degree in liquid media. This design can generally provide hydrogels with hybridized functions, including excellent mechanical properties, shape memory, and thermal healing, which are often difficult or impossible to achieve with single-component hydrogel systems. Furthermore, this technique enables controlled electrochemical reactions and channel-structure templating in hydrogel matrices. This work may play an important role in the future design of soft robots, wearable electronics, and biocompatible functional materials. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Functional Mobility Testing: A Novel Method to Create Suit Design Requirements
England, Scott A.; Benson, Elizabeth A.; Rajulu, Sudhakar L.
2008-01-01
This study was performed to aide in the creation of design requirements for the next generation of space suits that more accurately describe the level of mobility necessary for a suited crewmember through the use of an innovative methodology utilizing functional mobility. A novel method was utilized involving the collection of kinematic data while 20 subjects (10 male, 10 female) performed pertinent functional tasks that will be required of a suited crewmember during various phases of a lunar mission. These tasks were selected based on relevance and criticality from a larger list of tasks that may be carried out by the crew. Kinematic data was processed through Vicon BodyBuilder software to calculate joint angles for the ankle, knee, hip, torso, shoulder, elbow, and wrist. Maximum functional mobility was consistently lower than maximum isolated mobility. This study suggests that conventional methods for establishing design requirements for human-systems interfaces based on maximal isolated joint capabilities may overestimate the required mobility. Additionally, this method provides a valuable means of evaluating systems created from these requirements by comparing the mobility available in a new spacesuit, or the mobility required to use a new piece of hardware, to this newly established database of functional mobility.
International Nuclear Information System (INIS)
Nganga, Sara; Moritz, Niko; Jakobsson, Kristina; Vallittu, Pekka K; Kolakovic, Ruzica; Nyman, Johan O; Sandler, Niklas; Borgogna, Massimiliano; Travan, Andrea; Donati, Ivan; Crosera, Matteo
2014-01-01
Biostable fiber-reinforced composites, based on bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate thermoset polymer matrix reinforced with E-glass fibers have been successfully used in cranial reconstructions and the material has been approved for clinical use. As a further refinement of these implants, antimicrobial, non-cytotoxic coatings on the composites were created by an immersion procedure driven by strong electrostatic interactions. Silver nanoparticles (nAg) were immobilized in lactose-modified chitosan (Chitlac) to prepare the bacteriostatic coatings. Herein, we report the use of inkjet technology (a drop-on-demand inkjet printer) to deposit functional Chitlac-nAg coatings on the thermoset substrates. Characterization methods included scanning electron microscopy, scanning white light interferometry and electro-thermal atomic absorption spectroscopy. Inkjet printing enabled the fast and flexible functionalization of the thermoset surfaces with controlled coating patterns. The coatings were not impaired by the printing process: the kinetics of silver release from the coatings created by inkjet printing and conventional immersion technique was similar. Further research is foreseen to optimize printing parameters and to tailor the characteristics of the coatings for specific clinical applications. (note)
Nganga, Sara; Moritz, Niko; Kolakovic, Ruzica; Jakobsson, Kristina; Nyman, Johan O; Borgogna, Massimiliano; Travan, Andrea; Crosera, Matteo; Donati, Ivan; Vallittu, Pekka K; Sandler, Niklas
2014-10-22
Biostable fiber-reinforced composites, based on bisphenol-A-dimethacrylate and triethyleneglycoldimethacrylate thermoset polymer matrix reinforced with E-glass fibers have been successfully used in cranial reconstructions and the material has been approved for clinical use. As a further refinement of these implants, antimicrobial, non-cytotoxic coatings on the composites were created by an immersion procedure driven by strong electrostatic interactions. Silver nanoparticles (nAg) were immobilized in lactose-modified chitosan (Chitlac) to prepare the bacteriostatic coatings. Herein, we report the use of inkjet technology (a drop-on-demand inkjet printer) to deposit functional Chitlac-nAg coatings on the thermoset substrates. Characterization methods included scanning electron microscopy, scanning white light interferometry and electro-thermal atomic absorption spectroscopy. Inkjet printing enabled the fast and flexible functionalization of the thermoset surfaces with controlled coating patterns. The coatings were not impaired by the printing process: the kinetics of silver release from the coatings created by inkjet printing and conventional immersion technique was similar. Further research is foreseen to optimize printing parameters and to tailor the characteristics of the coatings for specific clinical applications.
Full Text Available ... tool is not to scale because of the differences in types of vegetables. When creating your plate ... function (data) { $('#survey-errors').remove(); $('.survey-form .form-group .survey-alert-wrap').remove(); if (data.submitSurveyResponse.success == ' ...
Shearer, Jeffrey C.
Functionalizing nanoparticles and other unusually shaped substrates to create more biologically relevant materials has become central to a wide range of research programs. One of the primary challenges in this field is creating highly functionalized surfaces without modifying the underlying bulk material. Traditional wet chemistry techniques utilize thin film depositions to functionalize nanomaterials with oxygen and nitrogen containing functional groups, such as --OH and --NHx. These functional groups can serve to create surfaces that are amenable to cell adhesion or can act as reactive groups for further attachment of larger structures, such as macromolecules or antiviral agents. Additional layers, such as SiO2, are often added between the nanomaterial and the functionalized coating to act as a barrier films, adhesion layers, and to increase overall hydrophilicity. However, some wet chemistry techniques can damage the bulk material during processing. This dissertation examines the use of plasma processing as an alternative method for producing these highly functionalized surfaces on nanoparticles and polymeric scaffolds through the use of plasma modification and plasma enhanced chemical vapor deposition techniques. Specifically, this dissertation will focus on (1) plasma deposition of SiO2 barrier films on nanoparticle substrates; (2) surface functionalization of amine and alcohol groups through (a) plasma co-polymerization and (b) plasma modification; and (3) the design and construction of plasma hardware to facilitate plasma processing of nanoparticles and polymeric scaffolds. The body of work presented herein first examines the fabrication of composite nanoparticles by plasma processing. SiOxC y and hexylamine films were coated onto TiO2 nanoparticles to demonstrate enhanced water dispersion properties. Continuous wave and pulsed allyl alcohol plasmas were used to produce highly functionalized Fe2 O3 supported nanoparticles. Specifically, film composition was
Creating value through CSR across company functions and NGO collaborations
DEFF Research Database (Denmark)
Lodsgård, Lise; Aagaard, Annabeth
2017-01-01
-NGO partnerships in the creation of sustainable innovation. The purpose of this study is to set up a model for defining these business-NGO partnerships and to investigate through a multiple cross-sectoral case-study how the different partnership types are managed to create strategic value through sustainable...... innovation. The findings reveal different practices, opportunities and challenges in creating sustainable innovation within the different types of business-NGO partnerships....
Creating biomaterials with spatially organized functionality.
Chow, Lesley W; Fischer, Jacob F
2016-05-01
Biomaterials for tissue engineering provide scaffolds to support cells and guide tissue regeneration. Despite significant advances in biomaterials design and fabrication techniques, engineered tissue constructs remain functionally inferior to native tissues. This is largely due to the inability to recreate the complex and dynamic hierarchical organization of the extracellular matrix components, which is intimately linked to a tissue's biological function. This review discusses current state-of-the-art strategies to control the spatial presentation of physical and biochemical cues within a biomaterial to recapitulate native tissue organization and function. © 2016 by the Society for Experimental Biology and Medicine.
Directory of Open Access Journals (Sweden)
Mendes Vanessa
2017-01-01
Full Text Available Tattooing process can be a painful experience whether achieving a permanent or temporary body art on skin, and there can be horrible consequences. By taking advantage of UV protection factor variables of fashion clothing materials, it is possible to create this kind of body art in a much healthier way. The material performance is key, besides UPF materials that relies on the material behaviour when combined, layer sequence of these materials used for the desired function is equally as important, if not, even more important so. When properly combined in the correct order, making use of the right technology it may be possible to test different combinations. The advantages are, besides creating a temporary tattoo, that the user can benefit from moderate sun bathing advantages, that can provide the desired body art design on skin and the sunbathing health benefits. All of this can only be possible with a deep understanding of the UV protection factor of fashion materials, and how it can be tested and used in the manufacturing process for the desired function.
Creating Future Memories: A Dialogue on Process
DEFF Research Database (Denmark)
Rehder, Mads Middelboe
2016-01-01
This contribution documents the generative method we used to create a two-day public workshop on archiving digital memory, which occurred in April 2016 at the Counterplay Festival in Aarhus. Our group members, collectively known as the Futuremaking group created two distinct experiences. The “Help...... Desk of the Future” was created as a means of acting out how unhelpful many helpdesks actually are and to imagine how algorithms may be positioning our futures for us. The Museum of Random Memory functioned as a pop-up curatorial event where participants could offer up memories, experiences...
Creating visual guidelines for a Finnish fashion brand
Morozova, Elizaveta
2017-01-01
Visual communication is an essential part of branding. Visual elements like logo, brand colours, and typography create associations with a brand and make it distinctive. Graphic design is a tool for visual communication that allows creating aesthetic and functional visual elements that convey some messages. The client of this thesis is a Finnish fashion company that does not have clear and consistent visual image, and the goal is to create it based on company’s values and desired image...
Energy Technology Data Exchange (ETDEWEB)
NONE
1991-03-01
In order to provide materials with superior advanced functions such as high-level biological compatibility, external environment identifying function, chemical reaction activating function, high-performance electromagnetic properties, and corrosion and heat resistant high strength properties, it is intended to establish novel material creating technologies using chemical processing processes that can control finely the compositions and constructions of the materials. The efforts include (1) works on research and development of an ultra-high purity separating technology composed mainly of laser selection and excitation actions for manifestation of new natures such as sensing function, catalytic function, and electromagnetic properties, (2) works on research and development of a micro-fine crystal controlling technology capable of designing materials, such as micro-fine particle synthesizing, dispersing and compounding technologies, micro thin film lamination, and interface controlling technologies to create materials having high strength as well as high tenacity, and (3) works on research and development of high-function organic material synthesizing technologies compounding the utilization of high-grade photons with application of extreme environmental fields such as ferromagnetic fields whose effects are expected on controlling structure like orientation of atomic and molecular levels for the purpose of creating high-function materials having high heat resistance, corrosion resistance, and lubrication performance. (NEDO)
Systematic Analysis of Splice-Site-Creating Mutations in Cancer
Directory of Open Access Journals (Sweden)
Reyka G. Jayasinghe
2018-04-01
Full Text Available Summary: For the past decade, cancer genomic studies have focused on mutations leading to splice-site disruption, overlooking those having splice-creating potential. Here, we applied a bioinformatic tool, MiSplice, for the large-scale discovery of splice-site-creating mutations (SCMs across 8,656 TCGA tumors. We report 1,964 originally mis-annotated mutations having clear evidence of creating alternative splice junctions. TP53 and GATA3 have 26 and 18 SCMs, respectively, and ATRX has 5 from lower-grade gliomas. Mutations in 11 genes, including PARP1, BRCA1, and BAP1, were experimentally validated for splice-site-creating function. Notably, we found that neoantigens induced by SCMs are likely several folds more immunogenic compared to missense mutations, exemplified by the recurrent GATA3 SCM. Further, high expression of PD-1 and PD-L1 was observed in tumors with SCMs, suggesting candidates for immune blockade therapy. Our work highlights the importance of integrating DNA and RNA data for understanding the functional and the clinical implications of mutations in human diseases. : Jayasinghe et al. identify nearly 2,000 splice-site-creating mutations (SCMs from over 8,000 tumor samples across 33 cancer types. They provide a more accurate interpretation of previously mis-annotated mutations, highlighting the importance of integrating data types to understand the functional and the clinical implications of splicing mutations in human disease. Keywords: splicing, RNA, mutations of clinical relevance
Development of soil properties and nitrogen cycling in created wetlands
Wolf, K.L.; Ahn, C.; Noe, G.B.
2011-01-01
Mitigation wetlands are expected to compensate for the loss of structure and function of natural wetlands within 5–10 years of creation; however, the age-based trajectory of development in wetlands is unclear. This study investigates the development of coupled structural (soil properties) and functional (nitrogen cycling) attributes of created non-tidal freshwater wetlands of varying ages and natural reference wetlands to determine if created wetlands attain the water quality ecosystem service of nitrogen (N) cycling over time. Soil condition component and its constituents, gravimetric soil moisture, total organic carbon, and total N, generally increased and bulk density decreased with age of the created wetland. Nitrogen flux rates demonstrated age-related patterns, with younger created wetlands having lower rates of ammonification, nitrification, nitrogen mineralization, and denitrification potential than older created wetlands and natural reference wetlands. Results show a clear age-related trajectory in coupled soil condition and N cycle development, which is essential for water quality improvement. These findings can be used to enhance N processing in created wetlands and inform the regulatory evaluation of mitigation wetlands by identifying structural indicators of N processing performance.
Self-interested agents create, maintain, and modify group-functional culture.
Singh, Manvir; Glowacki, Luke; Wrangham, Richard W
2016-01-01
We agree that institutions and rules are crucial for explaining human sociality, but we question the claim of there not being "alternatives to CGS [that] can easily account for the institutionalized cooperation that characterizes human societies" (target article, sect. 7). Hypothesizing that self-interested individuals coercively and collaboratively create rules, we propose that agent-based hypotheses offer viable alternatives to cultural group selection (CGS).
Creating e-learning games with Unity
Horachek, David
2014-01-01
Unity is a fully integrated development engine providing the required functionality to create games and interactive 3D content, while reducing the time, effort, and cost of developing the content. Nowadays, many people have started to use Unity in an eLearning setting as it allows them to create real-world scenarios, or models, for training purposes. With Unity, one can develop video games that are not only fun, but are also effective teaching and learning tools. When properly designed, an engaging game is an ideal platform for the presentation, testing, and application of learning objectives.
Energy Technology Data Exchange (ETDEWEB)
Podar, Mircea [ORNL; Graham, David E [ORNL; Reysenbach, Anna-Louise [Portland State University; Koonin, Eugene [National Center for Biotechnology Information; Wolf, Yuri [National Center for Biotechnology Information; Makarova, Kira S. [National Center for Biotechnology Information
2013-01-01
A hyperthemophilic member of the Nanoarchaeota from Obsidian Pool, a thermal feature in Yellowstone National Park was characterized using single cell isolation and sequencing, together with its putative host, a Sulfolobales archaeon. This first representative of a non-marine Nanoarchaeota (Nst1) resembles Nanoarchaeum equitans by lacking most biosynthetic capabilities, the two forming a deep-branching archaeal lineage. However, the Nst1 genome is over 20% larger, encodes a complete gluconeogenesis pathway and a full complement of archaeal flagellum proteins. Comparison of the two genomes suggests that the marine and terrestrial Nanoarchaeota lineages share a common ancestor that was already a symbiont of another archaeon. With a larger genome, a smaller repertoire of split protein encoding genes and no split non-contiguous tRNAs, Nst1 appears to have experienced less severe genome reduction than N. equitans. The inferred host of Nst1 is potentially autotrophic, with a streamlined genome and simplified central and energetic metabolism as compared to other Sulfolobales. The two distinct Nanoarchaeota-host genomic data sets offer insights into the evolution of archaeal symbiosis and parasitism and will further enable studies of the cellular and molecular mechanisms of these relationships.
Creating a Multi-axis Machining Postprocessor
Directory of Open Access Journals (Sweden)
Petr Vavruška
2012-01-01
Full Text Available This paper focuses on the postprocessor creation process. When using standard commercially available postprocessors it is often very difficult to modify its internal source code, and it is a very complex process, in many cases even impossible, to implement the newly-developed functions. It is therefore very important to have a method for creating a postprocessor for any CAM system, which allows CL data (Cutter Location data to be generated to a separate text file. The goal of our work is to verify the proposed method for creating a postprocessor. Postprocessor functions for multi-axis machiningare dealt with in this work. A file with CL data must be translated by the postprocessor into an NC program that has been customized for a specific production machine and its control system. The postprocessor is therefore verified by applications for machining free-form surfaces of complex parts, and by executing the NC programs that are generated on real machine tools. This is also presented here.
Cell adhesion pattern created by OSTE polymers.
Liu, Wenjia; Li, Yiyang; Ding, Xianting
2017-04-24
Engineering surfaces with functional polymers is a crucial issue in the field of micro/nanofabrication and cell-material interface studies. For many applications of surface patterning, it does not need cells to attach on the whole surface. Herein, we introduce a novel polymer fabrication protocol of off-stoichiometry thiol-ene (OSTE) polymers to create heterogeneity on the surface by utilizing 3D printing and soft-lithography. By choosing two OSTE polymers with different functional groups, we create a pattern where only parts of the surface can facilitate cell adhesion. We also study the hydrophilic property of OSTE polymers by mixing poly(ethylene glycol) (PEG) directly with pre-polymers and plasma treatments afterwards. Moreover, we investigate the effect of functional groups' excess ratio and hydrophilic property on the cell adhesion ability of OSTE polymers. The results show that the cell adhesion ability of OSTE materials can be tuned within a wide range by the coupling effect of functional groups' excess ratio and hydrophilic property. Meanwhile, by mixing PEG with pre-polymers and undergoing oxygen plasma treatment afterward can significantly improve the hydrophilic property of OSTE polymers.
Creating Virtual Exhibitions for Educational and Cultural Development
Directory of Open Access Journals (Sweden)
Gabriela DUMITRESCU
2014-01-01
Full Text Available The paper presents different tools and mechanisms to implement a virtual exhibition in different cultural areas, such as museums and libraries. Quality characteristics of virtual exhibitions are identified and described. The possibility to create native mobile applications for virtual exhibitions presentation is analyzed. The functional flow of creating a virtual exhibition is presented and discussed. The Seals - History Treasure exhibition is presented and significant historical documents are revealed.
International Nuclear Information System (INIS)
Dunaev, V.G.; Tarasov, M. V.; Povarov, P.V.
2005-01-01
Prerequisites of creating the software-hardware complex for reactor safety monitoring on the Volgodonsk NPP are analyzed and generalized. The concept of this complex is based on functions of the safety parameters presentation system. It will serve as an interface between operator and technological process and give to operator a possibility to estimate quickly the state of the safety of the nuclear power unit. The complex will be created on the basis of routine reactor monitoring and control systems intended for the WWER-1000 reactor. In addition to existing soft- and hard-wares for reactor monitoring and for analysis of technological archive, it is proposed to create and connect in parallel the new software-hardware complex which ensures calculation and presentation of generalized factors of reactor safety [ru
Systematic Analysis of Splice-Site-Creating Mutations in Cancer.
Jayasinghe, Reyka G; Cao, Song; Gao, Qingsong; Wendl, Michael C; Vo, Nam Sy; Reynolds, Sheila M; Zhao, Yanyan; Climente-González, Héctor; Chai, Shengjie; Wang, Fang; Varghese, Rajees; Huang, Mo; Liang, Wen-Wei; Wyczalkowski, Matthew A; Sengupta, Sohini; Li, Zhi; Payne, Samuel H; Fenyö, David; Miner, Jeffrey H; Walter, Matthew J; Vincent, Benjamin; Eyras, Eduardo; Chen, Ken; Shmulevich, Ilya; Chen, Feng; Ding, Li
2018-04-03
For the past decade, cancer genomic studies have focused on mutations leading to splice-site disruption, overlooking those having splice-creating potential. Here, we applied a bioinformatic tool, MiSplice, for the large-scale discovery of splice-site-creating mutations (SCMs) across 8,656 TCGA tumors. We report 1,964 originally mis-annotated mutations having clear evidence of creating alternative splice junctions. TP53 and GATA3 have 26 and 18 SCMs, respectively, and ATRX has 5 from lower-grade gliomas. Mutations in 11 genes, including PARP1, BRCA1, and BAP1, were experimentally validated for splice-site-creating function. Notably, we found that neoantigens induced by SCMs are likely several folds more immunogenic compared to missense mutations, exemplified by the recurrent GATA3 SCM. Further, high expression of PD-1 and PD-L1 was observed in tumors with SCMs, suggesting candidates for immune blockade therapy. Our work highlights the importance of integrating DNA and RNA data for understanding the functional and the clinical implications of mutations in human diseases. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.
Wurch, Louie; Giannone, Richard J; Belisle, Bernard S; Swift, Carolyn; Utturkar, Sagar; Hettich, Robert L; Reysenbach, Anna-Louise; Podar, Mircea
2016-07-05
Biological features can be inferred, based on genomic data, for many microbial lineages that remain uncultured. However, cultivation is important for characterizing an organism's physiology and testing its genome-encoded potential. Here we use single-cell genomics to infer cultivation conditions for the isolation of an ectosymbiotic Nanoarchaeota ('Nanopusillus acidilobi') and its host (Acidilobus, a crenarchaeote) from a terrestrial geothermal environment. The cells of 'Nanopusillus' are among the smallest known cellular organisms (100-300 nm). They appear to have a complete genetic information processing machinery, but lack almost all primary biosynthetic functions as well as respiration and ATP synthesis. Genomic and proteomic comparison with its distant relative, the marine Nanoarchaeum equitans illustrate an ancient, common evolutionary history of adaptation of the Nanoarchaeota to ectosymbiosis, so far unique among the Archaea.
CREATE-IP and CREATE-V: Data and Services Update
Carriere, L.; Potter, G. L.; Hertz, J.; Peters, J.; Maxwell, T. P.; Strong, S.; Shute, J.; Shen, Y.; Duffy, D.
2017-12-01
The NASA Center for Climate Simulation (NCCS) at the Goddard Space Flight Center and the Earth System Grid Federation (ESGF) are working together to build a uniform environment for the comparative study and use of a group of reanalysis datasets of particular importance to the research community. This effort is called the Collaborative REAnalysis Technical Environment (CREATE) and it contains two components: the CREATE-Intercomparison Project (CREATE-IP) and CREATE-V. This year's efforts included generating and publishing an atmospheric reanalysis ensemble mean and spread and improving the analytics available through CREATE-V. Related activities included adding access to subsets of the reanalysis data through ArcGIS and expanding the visualization tool to GMAO forecast data. This poster will present the access mechanisms to this data and use cases including example Jupyter Notebook code. The reanalysis ensemble was generated using two methods, first using standard Python tools for regridding, extracting levels and creating the ensemble mean and spread on a virtual server in the NCCS environment. The second was using a new analytics software suite, the Earth Data Analytics Services (EDAS), coupled with a high-performance Data Analytics and Storage System (DASS) developed at the NCCS. Results were compared to validate the EDAS methodologies, and the results, including time to process, will be presented. The ensemble includes selected 6 hourly and monthly variables, regridded to 1.25 degrees, with 24 common levels used for the 3D variables. Use cases for the new data and services will be presented, including the use of EDAS for the backend analytics on CREATE-V, the use of the GMAO forecast aerosol and cloud data in CREATE-V, and the ability to connect CREATE-V data to NCCS ArcGIS services.
Chimpanzees create and modify probe tools functionally: A study with zoo-housed chimpanzees.
Hopper, Lydia M; Tennie, Claudio; Ross, Stephen R; Lonsdorf, Elizabeth V
2015-02-01
Chimpanzees (Pan troglodytes) use tools to probe for out-of-reach food, both in the wild and in captivity. Beyond gathering appropriately-sized materials to create tools, chimpanzees also perform secondary modifications in order to create an optimized tool. In this study, we recorded the behavior of a group of zoo-housed chimpanzees when presented with opportunities to use tools to probe for liquid foods in an artificial termite mound within their enclosure. Previous research with this group of chimpanzees has shown that they are proficient at gathering materials from within their environment in order to create tools to probe for the liquid food within the artificial mound. Extending beyond this basic question, we first asked whether they only made and modified probe tools when it was appropriate to do so (i.e. when the mound was baited with food). Second, by collecting continuous data on their behavior, we also asked whether the chimpanzees first (intentionally) modified their tools prior to probing for food or whether such modifications occurred after tool use, possibly as a by-product of chewing and eating the food from the tools. Following our predictions, we found that tool modification predicted tool use; the chimpanzees began using their tools within a short delay of creating and modifying them, and the chimpanzees performed more tool modifying behaviors when food was available than when they could not gain food through the use of probe tools. We also discuss our results in terms of the chimpanzees' acquisition of the skills, and their flexibility of tool use and learning. © 2014 Wiley Periodicals, Inc.
Minkowski metrics in creating universal ranking algorithms
Directory of Open Access Journals (Sweden)
Andrzej Ameljańczyk
2014-06-01
Full Text Available The paper presents a general procedure for creating the rankings of a set of objects, while the relation of preference based on any ranking function. The analysis was possible to use the ranking functions began by showing the fundamental drawbacks of commonly used functions in the form of a weighted sum. As a special case of the ranking procedure in the space of a relation, the procedure based on the notion of an ideal element and generalized Minkowski distance from the element was proposed. This procedure, presented as universal ranking algorithm, eliminates most of the disadvantages of ranking functions in the form of a weighted sum.[b]Keywords[/b]: ranking functions, preference relation, ranking clusters, categories, ideal point, universal ranking algorithm
Creating standards: Creating illusions?
DEFF Research Database (Denmark)
Linneberg, Mai Skjøtt
written standards may open up for the creation of illusions. These are created when written standards' content is not in accordance with the perception standard adopters and standard users have of the specific practice phenomenon's content. This general theoretical argument is exemplified by the specific...
INNOVATIVE TECHNOLOGICAL SOLUTIONS IN CREATING FUNCTIONAL PRODUCTS POWER
Directory of Open Access Journals (Sweden)
I. V. Sergienko
2015-01-01
Full Text Available The article deals with a problem of functional products creation for consumers feeling need in proteins, irreplaceable amino acids, vitamins, mineral substances, food fibers, polynonsaturated fat acids. One of the possible ways to improve human nutrition is using non-traditional cultures for bread making technology containing significant amounts of fibrous substances, easily digestible protein, vitamins, unsaturated fatty acids and minerals. Taking into account the Nutrition Science requirements an expediency of the most full functional ingredients complex entering into bakery products prescription structure is proved. Replacement of the first grade wheat flour by the offered prescription composition allows to slow down a bread aging, to increase periods of products storage and to improve their physical and chemical indicators on the specific volume and porosity. The bakery products "Svyatogor" at the use of 100 g of a product allow to cover daily need in protein for 38,9%, in carbohydrates – for 3,4%, fat – for 9,2%. The power value of "Svyatogor" is 897 kJ, in control 959. Biological value, % 82,7 against 53,1 in control. Thanks to it the digestibility of bread protein (in vitro method of “Svyatogor” is higher. Thanks to unique properties of the compounding components “Svyatogor” gets functional properties by full-fledged protein increasing and its best comprehensibility (in vitro, advanced structure according to the content of vitamins, mineral substances, their balanced structure and can be recommended for mass consumption and prevention of osteoporosis, atherosclerosis, anemia, for children food, pregnant women and the feeding women.
Creating Innovative Student Projects with App Smashing
Young, Donna
2014-01-01
The potential for using various apps to improve student learning is tremendous. Yet, despite the iPad's possibilities, apps are often limited in their functionality. No one has created that magical, one-size-fits-all app that accomplishes all of the tasks that you had in mind. Luckily, there is an answer to this common problem: app smashing.…
Food web heterogeneity and succession in created saltmarshes
Nordstrom, M C; Demopoulos, Amanda W.J.; Whitcraft, CR; Rismondo, A.; McMillan, P.; Gonzales, J P; Levin, L A
2015-01-01
1. Ecological restoration must achieve functional as well as structural recovery. Functional metrics for reestablishment of trophic interactions can be used to complement traditional monitoring of structural attributes. In addition, topographic effects on food web structure provide added information within a restoration context; often, created sites may require spatial heterogeneity to effectively match structure and function of natural habitats. 2. We addressed both of these issues in our study of successional development of benthic food web structure, with focus on bottom–up driven changes in macroinvertebrate consumer assemblages in the salt marshes of the Venice Lagoon, Italy. We combined quantified estimates of the changing community composition with stable isotope data (13C:12C and 15N:14N) to compare the general trophic structure between created (2–14 years) marshes and reference sites and along topographic elevation gradients within salt marshes. 3. Macrofaunal invertebrate consumers exhibited local, habitat-specific trophic patterns. Stable isotope-based trophic structure changed with increasing marsh age, in particular with regards to mid-elevation (Salicornia) habitats. In young marshes, the mid-elevation consumer signatures resembled those of unvegetated ponds. The mid elevation of older and natural marshes had a more distinct Salicornia-zone food web, occasionally resembling that of the highest (Sarcocornia-dominated) elevation. In summary, this indicates that primary producers and availability of vascular plant detritus structure consumer trophic interactions and the flow of carbon. 4. Functionally different consumers, subsurface-feeding detritivores (Oligochaeta) and surface grazers (Hydrobia sp.), showed distinct but converging trajectories of isotopic change over time, indicating that successional development may be asymmetric between ‘brown’ (detrital) guilds and ‘green’ (grazing) guilds in the food web. 5. Synthesis and applications
Problems of quantum electrodynamics with external field creating pairs
International Nuclear Information System (INIS)
Fradkin, E.S.; Gitman, D.M.
1979-11-01
This paper is a preliminary version of a review of the results obtained by the authors and their collaborators which mainly concern problems of quantum electrodynamics with the pair-creating external field. In this paper the Furry picture is constructed for quantum electrodynamics with the pair-creating external field. It is shown, that various Green functions in the external field arise in the theory in a natural way. Special features of usage of the unitarity conditions for calculating the total probabilities of transitions are discussed. Perturbation theory for determining the mean electromagnetic field is constructed. Effective Lagrangians for pair-creating fields are built. One of the possible ways to introduce external field in quantum electrodynamics is considered. All the Green functions arising in the theory suggested are calculated for a constant field and a plane wave field. For the case of the electric field the total probability of creation of pairs from the vacuum accompanied by the photon irradiation and the total probability of transition from a single-electron state accompanied by the photon irradiation and creation of pairs are obtained by using the formulated rules for calculating the total probabilities of transitions. (author)
Hospital culture--why create one?
Sovie, M D
1993-01-01
Hospitals, to survive, must be transformed into responsive, participative organizations capable of new practices that produce improved results in both quality of care and service at reduced costs. Creating, managing, and changing the culture are critical leadership functions that will enable the hospital to succeed. Strategic planning and effective implementation of planned change will produce the desired culture. Work restructuring, a focus on quality management along with changes in clinical practices, as well as the care and support processes, are all a part of the necessary hospital cultural revolution.
INNOVATIVE TECHNOLOGICAL SOLUTIONS IN CREATING FUNCTIONAL PRODUCTS POWER
I. V. Sergienko; A. E. Kutsova; S. V. Kutsov
2015-01-01
The article deals with a problem of functional products creation for consumers feeling need in proteins, irreplaceable amino acids, vitamins, mineral substances, food fibers, polynonsaturated fat acids. One of the possible ways to improve human nutrition is using non-traditional cultures for bread making technology containing significant amounts of fibrous substances, easily digestible protein, vitamins, unsaturated fatty acids and minerals. Taking into account the Nutrition Science requireme...
Giannone, Richard J; Wurch, Louie L; Podar, Mircea; Hettich, Robert L
2015-08-04
The marine archaeon Nanoarchaeum equitans is dependent on direct physical contact with its host, the hyperthermophile Ignicoccus hospitalis. As this interaction is thought to be membrane-associated, involving a myriad of membrane-anchored proteins, proteomic efforts to better characterize this difficult to analyze interface are paramount to uncovering the mechanism of their association. By extending multienzyme digestion strategies that use sample filtration to recover underdigested proteins for reprocessing/consecutive proteolytic digestion, we applied chymotrypsin to redigest the proteinaceous material left over after initial proteolysis with trypsin of sodium dodecyl sulfate (SDS)-extracted I. hospitalis-N. equitans proteins. Using this method, we show that proteins with increased hydrophobic character, including membrane proteins with multiple transmembrane helices, are enriched and recovered in the underdigested fraction. Chymotryptic reprocessing provided significant sequence coverage gains in both soluble and hydrophobic proteins alike, with the latter benefiting more so in terms of membrane protein representation. These gains were despite a large proportion of high-quality peptide spectra remaining unassigned in the underdigested fraction suggesting high levels of protein modification on these often surface-exposed proteins. Importantly, these gains were achieved without applying extensive fractionation strategies usually required for thorough characterization of membrane-associated proteins and were facilitated by the generation of a distinct, complementary set of peptides that aid in both the identification and quantitation of this important, under-represented class of proteins.
A transposase strategy for creating libraries of circularly permuted proteins.
Mehta, Manan M; Liu, Shirley; Silberg, Jonathan J
2012-05-01
A simple approach for creating libraries of circularly permuted proteins is described that is called PERMutation Using Transposase Engineering (PERMUTE). In PERMUTE, the transposase MuA is used to randomly insert a minitransposon that can function as a protein expression vector into a plasmid that contains the open reading frame (ORF) being permuted. A library of vectors that express different permuted variants of the ORF-encoded protein is created by: (i) using bacteria to select for target vectors that acquire an integrated minitransposon; (ii) excising the ensemble of ORFs that contain an integrated minitransposon from the selected vectors; and (iii) circularizing the ensemble of ORFs containing integrated minitransposons using intramolecular ligation. Construction of a Thermotoga neapolitana adenylate kinase (AK) library using PERMUTE revealed that this approach produces vectors that express circularly permuted proteins with distinct sequence diversity from existing methods. In addition, selection of this library for variants that complement the growth of Escherichia coli with a temperature-sensitive AK identified functional proteins with novel architectures, suggesting that PERMUTE will be useful for the directed evolution of proteins with new functions.
fgui: A Method for Automatically Creating Graphical User Interfaces for Command-Line R Packages
Hoffmann, Thomas J.; Laird, Nan M.
2009-01-01
The fgui R package is designed for developers of R packages, to help rapidly, and sometimes fully automatically, create a graphical user interface for a command line R package. The interface is built upon the Tcl/Tk graphical interface included in R. The package further facilitates the developer by loading in the help files from the command line functions to provide context sensitive help to the user with no additional effort from the developer. Passing a function as the argument to the routines in the fgui package creates a graphical interface for the function, and further options are available to tweak this interface for those who want more flexibility. PMID:21625291
Full Text Available ... Plate Share Create Your Plate ! Share: Seven Simple Steps to Create Your Plate It's simple and effective ... foods within each food category. Try these seven steps to get started: Using your dinner plate, put ...
Full Text Available ... of the differences in types of vegetables. When creating your plate at home, remember that half of ... effective for both managing diabetes and losing weight. Creating your plate lets you still choose the foods ...
Energy Technology Data Exchange (ETDEWEB)
NONE
1994-01-01
A joint research has been performed between the Material Engineering Technology Research Institute of the National Institute of Materials and Chemical Research of the Ministry of International Trade and Industry and the Advanced Function Creating and Processing Technology Research Association. The research themes are the 'identification of the basic conditions for production of ultra fine ceramics particles by using the hybrid high-frequency plasma process' and the 'establishment of non-destructive analysis technology for inclination functional materials'. This paper reports the achievements in fiscal 1992. The research on the inclination functional materials has performed hybridization of high-frequency plasmas and fabrication of ultra fine alumina particles, trial fabrication and evaluation on alumina-titanium mixed ultra fine particles by using the high-frequency plasma process, spraying of hydroxyapatite by using high-frequency plasma, evaluation on thick film bulk made of ultra fine particles, and trial fabrication of an ultra fine particle injection device. It was intended to evaluate quantitatively crystalline deficiency and composition distribution in the inclination functional materials for which continuous composition control is important. Therefore, a Rutherford wake scattering device was introduced and installed newly at the Material Engineering Technology Research Institute, which has improved the evaluation and experiment system at the institute. (NEDO)
Full Text Available ... Planning Meals > Create Your Plate Share: Print Page Text Size: A A A Listen En Español Create ... Type 2 Education Series Hear audio clips and full recordings of past Q&A events at your ...
Full Text Available ... for Association Events Messaging Tools Recruiting Advocates Local Market Planning Training Webinars News & Events Advocacy News Call ... Meals > Create Your Plate Share: Print Page Text Size: A A A Listen En Español Create Your ...
Full Text Available ... In Memory In Honor Become a Member En Español Type 1 Type 2 About Us Online Community ... Page Text Size: A A A Listen En Español Create Your Plate Create Your Plate is a ...
Full Text Available ... Planning Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart- ... Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy Foods ...
Creating Synthetic Coronal Observational Data From MHD Models: The Forward Technique
Rachmeler, Laurel A.; Gibson, Sarah E.; Dove, James; Kucera, Therese Ann
2010-01-01
We present a generalized forward code for creating simulated corona) observables off the limb from numerical and analytical MHD models. This generalized forward model is capable of creating emission maps in various wavelengths for instruments such as SXT, EIT, EIS, and coronagraphs, as well as spectropolari metric images and line profiles. The inputs to our code can be analytic models (of which four come with the code) or 2.5D and 3D numerical datacubes. We present some examples of the observable data created with our code as well as its functional capabilities. This code is currently available for beta-testing (contact authors), with the ultimate goal of release as a SolarSoft package
Creating Value Through the Freemium Business Model: A Consumer Perspective
G.J. Rietveld (Joost)
2016-01-01
textabstractThis paper develops a consumer-centric framework for creating value through the freemium business model. Goods that are commercialized through the freemium business model offer basic functionality for free and monetize users for extended use or complementary features. Compared to premium
Full Text Available ... Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart-Healthy Foods Holiday Meal Planning ... Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets ...
Measuring and Communicating the Value Created by an Organization
Sherman, W. Richard
2010-01-01
This paper offers a different perspective in measuring the value created by an organization. It does so in the context of an undergraduate course in managerial accounting. In order to break down the functional silo approach to problem solving that has become the model of traditional business education, applications of shadow accounting, the…
Workshop: Creating Your Institutional Research Repository
Grenz, Daryl M.
2016-11-08
In 2002, the Scholarly Publishing and Academic Resources Coalition (SPARC) proposed the concept of an institutional repository to simultaneously disrupt and enhance the state of scholarly communications in the academic world. Thirteen years later, thousands of universities and other institutions have answered this call, but many more have not due to gaps in budgets, awareness and, most of all, practical guidance on creating an institutional repository. This workshop provides you with an essential primer on what it takes to establish a fully-functioning institutional repository. Every aspect of the process will be covered, including policies, procedures, staffing guidelines, workflows and repository technologies.
Creating Better Library Information Systems: The Road to FRBR-Land
Mercun, Tanja; Švab, Katarina; Harej, Viktor; Žumer, Maja
2013-01-01
Introduction: To provide valuable services in the future, libraries will need to create better information systems and set up an infrastructure more in line with the current technologies. The "Functional Requirements for Bibliographic Records" conceptual model provides a basis for this transformation, but there are still a number of…
Furry picture for quantum electrodynamics with pair-creating external field
International Nuclear Information System (INIS)
Fradkin, E.S.
1981-01-01
The perturbation theory is constructed for QED, for which the interaction with the external pair-creating field is kept exactly. An explicit expression for the perturbation theory causal electron propagator is found. Special features of usage of the unitarity conditions for calculating the total probabilities of radiative processes in the case are discussed. Exact Green functions are introduced and the functional formulation is discussed. Perturbation theory for calculating the mean values of the Heisenberg operators, in particular, of the mean electromagnetic field is built in the case under consideration. Effective Lagrangian which generates the exact equation for the mean electromagnetic field is introduced. Functional representations for the generating functionals introduced in the paper are discussed. (author)
Evolutionary Data Mining Approach to Creating Digital Logic
2010-01-01
To deal with this problem a genetic program (GP) based data mining ( DM ) procedure has been invented (Smith 2005). A genetic program is an algorithm...that can operate on the variables. When a GP was used as a DM function in the past to automatically create fuzzy decision trees, the Report...rules represents an approach to the determining the effect of linguistic imprecision, i.e., the inability of experts to provide crisp rules. The
Use of created cattail ( Typha) wetlands in mitigation strategies
Dobberteen, Ross A.; Nickerson, Norton H.
1991-11-01
In order to balance pressures for land-use development with protection of wetland resources, artificial wetlands have been constructed in an effort to replace lost ecosystems. Despite its regulatory appeal and prominent role in current mitigation strategies, it is unclear whether or not created systems actually compensate for lost wetland resources. Mitigation predictions that rely on artificial wetlands must be analyzed critically in terms of their efficacy. Destruction of wetlands due to burial by coal fly ash at a municipal landfill in Danvers, Massachusetts, USA, provided an opportunity to compare resulting growth of created cattail ( Typha) marshes with natural wetland areas. Once the appropriate cattail species was identified for growth under disturbed landfill conditions, two types of artificial wetlands were constructed. The two systems differed in their hydrologic attributes: while one had a surface water flow characteristic of most cattail wetlands, the second system mimicked soil and water conditions found in naturally occurring floating cattail marshes. Comparison of plant growth measurements for two years from the artificial systems with published values for natural cattail marshes revealed similar structure and growth patterns. Experiments are now in progress to investigate the ability of created cattail marshes to remove and accumulate heavy metals from polluted landfill leachate. Research of the type reported here must be pursued aggressively in order to document the performance of artificial wetlands in terms of plant structure and wetland functions. Such research should allow us to start to evaluate whether artificial systems actually compensate for lost wetlands by performing similar functions and providing the concomitant public benefits.
Data Programming: Creating Large Training Sets, Quickly
Ratner, Alexander; De Sa, Christopher; Wu, Sen; Selsam, Daniel; Ré, Christopher
2018-01-01
Large labeled training sets are the critical building blocks of supervised learning methods and are key enablers of deep learning techniques. For some applications, creating labeled training sets is the most time-consuming and expensive part of applying machine learning. We therefore propose a paradigm for the programmatic creation of training sets called data programming in which users express weak supervision strategies or domain heuristics as labeling functions, which are programs that label subsets of the data, but that are noisy and may conflict. We show that by explicitly representing this training set labeling process as a generative model, we can “denoise” the generated training set, and establish theoretically that we can recover the parameters of these generative models in a handful of settings. We then show how to modify a discriminative loss function to make it noise-aware, and demonstrate our method over a range of discriminative models including logistic regression and LSTMs. Experimentally, on the 2014 TAC-KBP Slot Filling challenge, we show that data programming would have led to a new winning score, and also show that applying data programming to an LSTM model leads to a TAC-KBP score almost 6 F1 points over a state-of-the-art LSTM baseline (and into second place in the competition). Additionally, in initial user studies we observed that data programming may be an easier way for non-experts to create machine learning models when training data is limited or unavailable. PMID:29872252
Digital Repository Service at National Institute of Oceanography (India)
Chakraborty, B.
Using multibeam system, artifact creating conditions are dominant when functioning in highly reflective and flat bottom areas. This simulation study manifests the causes responsible for creating such conditions which influence seafloor...
Martin, Teresa A.; Herman, Christine T.; Limpoco, Francis T.; Michael, Madeline C.; Potts, Gregory K.; Bailey, Ryan C.
2014-01-01
Methods for the generation of substrates presenting biomolecules in a spatially controlled manner are enabling tools for applications in biosensor systems, microarray technologies, fundamental biological studies and biointerface science. We have implemented a method to create biomolecular patterns by using light to control the direct covalent immobilization of biomolecules onto benzophenone-modified glass substrates. We have generated substrates presenting up to three different biomolecules patterned in sequence, and demonstrate biomolecular photopatterning on corrugated substrates. The chemistry of the underlying monolayer was optimized to incorporate poly(ethylene glycol) to enable adhesive cell adhesion onto patterned extracellular matrix proteins. Substrates were characterized with contact angle goniometry, AFM, and immunofluorescence microscopy. Importantly, radioimmunoassays were performed to quantify the site density of immobilized biomolecules on photopatterned substrates. Retention of function of photopatterned proteins was demonstrated both by native ligand recognition and cell adhesion to photopatterned substrates, revealing that substrates generated with this method are suitable for probing specific cell receptor-ligand interactions. This molecularly general photochemical patterning method is an enabling tool that will allow the creation of substrates presenting both biochemical and topographical variation, which is an important feature of many native biointerfaces. PMID:21793535
Study by electron spin resonance of the free radicals created under irradiation in glycine
International Nuclear Information System (INIS)
Thomet, P.; Rassat, A.; Servoz-Gavin, P.; Choudens, H. de
1967-01-01
The free radicals created by different radiations in glycine are measured by electron spin resonance and their number is evaluated in function of the absorbed dose. This number decreases when the LET of the radiations increases ; in other words,high LET radiations gives less radiochemical effects; in contrary with the fact that high LET radiations creates more damage in biological materials. The decreasing with time of the number of free radicals and the speed of this decrease is a function of temperature; by the study of the kinetics of this decrease, an attempt has been made to prove the presence of three radicals. (authors) [fr
Creating more effective graphs
Robbins, Naomi B
2012-01-01
A succinct and highly readable guide to creating effective graphs The right graph can be a powerful tool for communicating information, improving a presentation, or conveying your point in print. If your professional endeavors call for you to present data graphically, here's a book that can help you do it more effectively. Creating More Effective Graphs gives you the basic knowledge and techniques required to choose and create appropriate graphs for a broad range of applications. Using real-world examples everyone can relate to, the author draws on her years of experience in gr
Experience of creating a multifunctional safety system at the coal mining enterprise
Reshetnikov, V. V.; Davkaev, K. S.; Korolkov, M. V.; Lyakhovets, M. V.
2018-05-01
The principles of creating multifunctional safety systems (MFSS) based on mathematical models with Markov properties are considered. The applicability of such models for the analysis of the safety of the created systems and their effectiveness is substantiated. The method of this analysis and the results of its testing are discussed. The variant of IFSB implementation in the conditions of the operating coal-mining enterprise is given. The functional scheme, data scheme and operating modes of the MFSS are given. The automated workplace of the industrial safety controller is described.
Creating organizational cultures
DEFF Research Database (Denmark)
Mouton, Nicolaas T.O.; Just, Sine Nørholm; Gabrielsen, Jonas
2012-01-01
Purpose – The purpose of this paper is to re-conceptualize the relations between rhetorical strategies and material practices in the processes whereby leaders create or change organizational cultures. Design/methodology/approach – The authors compare and contrast two broad perspectives on cultural...... insights. The authors propose an integrated perspective in which material practices and rhetorical strategies are seen as two analytical sides of the same ontological coin. This enables a fuller and more detailed explanation of how organizational cultures are created or changed. A brief illustration...
Managerial strategies for creating an effective work environment.
Luse, Kimberly A
2013-01-01
To create a highly functioning medical imaging team, radiology managers must be able to analyze their departments and identify areas for improvement. This type of analysis means assessing front-line personnel who already work in the department, along with identifying staffing needs and recruiting talented new employees. In addition, managers must develop effective retention tools such as career ladders and mentorship programs to improve the overall working environment. This article discusses a variety of different strategies to help managers develop a more effective department.
Creating 3D visualizations of MRI data: A brief guide
Madan, Christopher R.
2015-01-01
While magnetic resonance imaging (MRI) data is itself 3D, it is often difficult to adequately present the results papers and slides in 3D. As a result, findings of MRI studies are often presented in 2D instead. A solution is to create figures that include perspective and can convey 3D information; such figures can sometimes be produced by standard functional magnetic resonance imaging (fMRI) analysis packages and related specialty programs. However, many options cannot provide functionality such as visualizing activation clusters that are both cortical and subcortical (i.e., a 3D glass brain), the production of several statistical maps with an identical perspective in the 3D rendering, or animated renderings. Here I detail an approach for creating 3D visualizations of MRI data that satisfies all of these criteria. Though a 3D ‘glass brain’ rendering can sometimes be difficult to interpret, they are useful in showing a more overall representation of the results, whereas the traditional slices show a more local view. Combined, presenting both 2D and 3D representations of MR images can provide a more comprehensive view of the study’s findings. PMID:26594340
DEFF Research Database (Denmark)
Törpel, Bettina
2006-01-01
The objective of this paper is the design of computer supported joint action spaces. It is argued against a view of functionality as residing in computer applications. In such a view the creation of functionality is equivalent to the creation of computer applications. Functionality, in the view...... advocated in this paper, emerges in the specific dynamic interplay of actors, objectives, structures, practices and means. In this view, functionality is the result of creating, harnessing and inhabiting computer supported joint action spaces. The successful creation and further development of a computer...... supported joint action space comprises a whole range of appropriate design contributions. The approach is illustrated by the example of the creation of the computer supported joint action space "exchange network of voluntary union educators". As part of the effort a group of participants created...
mRNA Transcript Diversity Creates New Opportunities for Pharmacological Intervention
Barrie, Elizabeth S.; Smith, Ryan M.; Sanford, Jonathan C.; Sadee, Wolfgang
2012-01-01
Most protein coding genes generate multiple RNA transcripts through alternative splicing, variable 3′ and 5′UTRs, and RNA editing. Although drug design typically targets the main transcript, alternative transcripts can have profound physiological effects, encoding proteins with distinct functions or regulatory properties. Formation of these alternative transcripts is tissue-selective and context-dependent, creating opportunities for more effective and targeted therapies with reduced adverse e...
Creating visual explanations improves learning.
Bobek, Eliza; Tversky, Barbara
2016-01-01
Many topics in science are notoriously difficult for students to learn. Mechanisms and processes outside student experience present particular challenges. While instruction typically involves visualizations, students usually explain in words. Because visual explanations can show parts and processes of complex systems directly, creating them should have benefits beyond creating verbal explanations. We compared learning from creating visual or verbal explanations for two STEM domains, a mechanical system (bicycle pump) and a chemical system (bonding). Both kinds of explanations were analyzed for content and learning assess by a post-test. For the mechanical system, creating a visual explanation increased understanding particularly for participants of low spatial ability. For the chemical system, creating both visual and verbal explanations improved learning without new teaching. Creating a visual explanation was superior and benefitted participants of both high and low spatial ability. Visual explanations often included crucial yet invisible features. The greater effectiveness of visual explanations appears attributable to the checks they provide for completeness and coherence as well as to their roles as platforms for inference. The benefits should generalize to other domains like the social sciences, history, and archeology where important information can be visualized. Together, the findings provide support for the use of learner-generated visual explanations as a powerful learning tool.
Creating Shape Templates for Patient Specific Biventricular Modeling in Congenital Heart Disease
Gilbert, Kathleen; Farrar, Genevieve; Cowan, Brett R.; Suinesiaputra, Avan; Occleshaw, Christopher; Pontré, Beau; Perry, James; Hegde, Sanjeet; Marsden, Alison; Omens, Jeff; McCulloch, Andrew; Young, Alistair A.
2018-01-01
Survival rates for infants with congenital heart disease (CHD) are improving, resulting in a growing population of adults with CHD. However, the analysis of left and right ventricular function is very time-consuming owing to the variety of congenital morphologies. Efficient customization of patient geometry and function depends on high quality shape templates specifically designed for the application. In this paper, we combine a method for creating finite element shape templates with an interactive template customization to patient MRI examinations. This enables different templates to be chosen depending on patient morphology. To demonstrate this pipeline, a new biventricular template with 162 elements was created and tested in place of an existing 82-element template. The method was able to provide fast interactive biventricular analysis with 0.31 sec per edit response time. The new template was customized to 13 CHD patients with similar biventricular topology, showing improved performance over the previous template and good agreement with clinical indices. PMID:26736353
Creating photo-realistic works in a 3D scene using layers styles to create an animation
Avramescu, A. M.
2015-11-01
Creating realist objects in a 3D scene is not an easy work. We have to be very careful to make the creation very detailed. If we don't know how to make these photo-realistic works, by using the techniques and a good reference photo we can create an amazing amount of detail and realism. For example, in this article there are some of these detailed methods from which we can learn the techniques necessary to make beautiful and realistic objects in a scene. More precisely, in this paper, we present how to create a 3D animated scene, mainly using the Pen Tool and Blending Options. Indeed, this work is based on teaching some simple ways of using the Layer Styles to create some great shadows, lights, textures and a realistic sense of 3 Dimension. The present work involves also showing how some interesting ways of using the illuminating and rendering options can create a realistic effect in a scene. Moreover, this article shows how to create photo realistic 3D models from a digital image. The present work proposes to present how to use Illustrator paths, texturing, basic lighting and rendering, how to apply textures and how to parent the building and objects components. We also propose to use this proposition to recreate smaller details or 3D objects from a 2D image. After a critic art stage, we are able now to present in this paper the architecture of a design method that proposes to create an animation. The aim is to create a conceptual and methodological tutorial to address this issue both scientifically and in practice. This objective also includes proposing, on strong scientific basis, a model that gives the possibility of a better understanding of the techniques necessary to create a realistic animation.
Creating a family health history
... this page: //medlineplus.gov/ency/patientinstructions/000947.htm Creating a family health history To use the sharing ... Many health problems tend to run in families. Creating a family history can help you and your ...
Wetland creation, enhancement, and restoration activities are commonly implemented to compensate for wetland loss or degradation. However, functional equivalence in restored and created wetland habitats is often poorly understood. In estuarine habitats, changes in habitat qualit...
FGB: A Graphical and Haptic User Interface for Creating Graphical, Haptic User Interfaces
International Nuclear Information System (INIS)
ANDERSON, THOMAS G.; BRECKENRIDGE, ARTHURINE; DAVIDSON, GEORGE S.
1999-01-01
The emerging field of haptics represents a fundamental change in human-computer interaction (HCI), and presents solutions to problems that are difficult or impossible to solve with a two-dimensional, mouse-based interface. To take advantage of the potential of haptics, however, innovative interaction techniques and programming environments are needed. This paper describes FGB (FLIGHT GHUI Builder), a programming tool that can be used to create an application specific graphical and haptic user interface (GHUI). FGB is itself a graphical and haptic user interface with which a programmer can intuitively create and manipulate components of a GHUI in real time in a graphical environment through the use of a haptic device. The programmer can create a GHUI without writing any programming code. After a user interface is created, FGB writes the appropriate programming code to a file, using the FLIGHT API, to recreate what the programmer created in the FGB interface. FGB saves programming time and increases productivity, because a programmer can see the end result as it is created, and FGB does much of the programming itself. Interestingly, as FGB was created, it was used to help build itself. The further FGB was in its development, the more easily and quickly it could be used to create additional functionality and improve its own design. As a finished product, FGB can be used to recreate itself in much less time than it originally required, and with much less programming. This paper describes FGB's GHUI components, the techniques used in the interface, how the output code is created, where programming additions and modifications should be placed, and how it can be compared to and integrated with existing API's such as MFC and Visual C++, OpenGL, and GHOST
Drury, John
Encouraging exploration and practice, this book offers hundreds of exercises and numerous tips covering every step involved in creating poetry. Each chapter is a self-contained unit offering an overview of material in the chapter, a definition of terms, and poetry examples from well-known authors designed to supplement the numerous exercises.…
Pattern-Driven Architectural Partitioning. Balancing Functional and Non-functional Requirements
Harrison, Neil; Avgeriou, Paris
2007-01-01
One of the vexing challenges of software architecture is the problem of satisfying the functional specifications of the system to be created while at the same time meeting its non-functional needs. In this work we focus on the early stages of the software architecture process, when initial
Directory of Open Access Journals (Sweden)
Per Olsson
2007-06-01
Full Text Available In this article, we focus on adaptive governance of social-ecological systems (SES and, more specifically, on social factors that can enhance the fit between governance systems and ecosystems. The challenge lies in matching multilevel governance system, often characterized by fragmented organizational and institutional structures and compartmentalized and sectorized decision-making processes, with ecosystems characterized by complex interactions in time and space. The ability to create the right links, at the right time, around the right issues in multilevel governance systems is crucial for fostering responses that build social-ecological resilience and maintain the capacity of complex and dynamic ecosystems to generate services for human well-being. This is especially true in the face of uncertainty and during periods of abrupt change and reorganization. We draw on our earlier work in the Kristianstads Vattenrike Biosphere Reserve (KVBR, in southern Sweden, to provide new insights on factors that can improve such linking. We focus especially on the bridging function in SES and the factors that constrain bridging in multilevel governance systems, and strategies used to overcome these. We present two features that seem critical for linking organizations dynamically across multiple levels: 1 the role of bridging organizations and 2 the importance of leadership. Bridging organizations and the bridging function can be vulnerable to disturbance, but there are sources of resilience for securing these key structures and functions in SES. These include social mechanisms for combining multiple sources of knowledge, building moral and political support in social networks, and having legal and financial support as part of the adaptive governance structure.
CERN. Geneva
2017-01-01
LHC Create is an upcoming 2-day workshop held at IdeaSquare in November. Participants from CERN and IPAC school of design will compete to design an exhibit that explains why CERN does what it does. The winner will have their exhibit fully realised and made available to experiments, institutes, and tourism agencies around the world.
The formation of soap bubbles created by blowing on soap films
Salkin, Louis; Schmit, Alexandre; Panizza, Pascal; Courbin, Laurent
2015-11-01
Using either circular bubble wands or long-lasting vertically falling soap films having an adjustable steady state thickness, we study the formation of soap bubbles created when air is blown through a nozzle onto a soap film. We vary nozzle radius, film size, space between the film and nozzle, and gas density, and we measure the gas velocity threshold above which bubbles are generated. The response is sensitive to confinement, that is, the ratio between film and jet sizes, and dissipation in the turbulent gas jet which is a function of the distance from the nozzle to the film. We observe four different regimes that we rationalize by comparing the dynamic pressure of a jet on the film and the Laplace pressure needed to create the curved surface of a bubble.
Full Text Available ... critical diabetes research and support vital diabetes education services that improve the lives of those with diabetes. $50 $100 $250 $500 Other Other Ways ... Meals > Create Your Plate ...
Funabashi, Martha; Kawchuk, Gregory N; Vette, Albert H; Goldsmith, Peter; Prasad, Narasimha
2016-12-01
Spinal manipulative therapy (SMT) creates health benefits for some while for others, no benefit or even adverse events. Understanding these differential responses is important to optimize patient care and safety. Toward this, characterizing how loads created by SMT relate to those created by typical motions is fundamental. Using robotic testing, it is now possible to make these comparisons to determine if SMT generates unique loading scenarios. In 12 porcine cadavers, SMT and passive motions were applied to the L3/L4 segment and the resulting kinematics tracked. The L3/L4 segment was removed, mounted in a parallel robot and kinematics of SMT and passive movements replayed robotically. The resulting forces experienced by L3/L4 were collected. Overall, SMT created both significantly greater and smaller loads compared to passive motions, with SMT generating greater anterioposterior peak force (the direction of force application) compared to all passive motions. In some comparisons, SMT did not create significantly different loads in the intact specimen, but did so in specific spinal tissues. Despite methodological differences between studies, SMT forces and loading rates fell below published injury values. Future studies are warranted to understand if loading scenarios unique to SMT confer its differential therapeutic effects.
A new intelligent algorithm to create a profile for user based on web interactions
Directory of Open Access Journals (Sweden)
Zeinab khademali
2013-04-01
Full Text Available This paper presents a method to classify the web user’s navigation patterns automatically. The proposed model of this paper classifies user’s navigation patterns and predicts his/her upcoming requirements. To create users’ profile, a new method is introduced by recording user’s settings active and user’s similarity measurement with neighboring users. The proposed model is capable of creating the profile implicitly. Besides, it updates the profile based on created changes. In fact, we try to improve the function of recommender engine using user’s navigation patterns and clustering. The method is based on user’s navigation patterns and is able to present the result of recommender engine based on user’s requirement and interest. In addition, this method has the ability to help customize websites, more efficiently.
Creating Value Through the Freemium Business Model: A Consumer Perspective
Rietveld, Joost
2016-01-01
textabstractThis paper develops a consumer-centric framework for creating value through the freemium business model. Goods that are commercialized through the freemium business model offer basic functionality for free and monetize users for extended use or complementary features. Compared to premium goods, freemium goods have lower barriers to adoption and allow end-users to accurately assess and act on their willingness to pay. On the other hand, convincing users to spend money on freemium g...
Effect of antecedent terrestrial land-use on C and N cycling in created wetlands
McCalley, C. K.; Al Graiti, T.; Williams, T.; Huang, S.; McGowan, M. B.; Eddingsaas, N. C.; Tyler, A. C.
2017-12-01
Land-use legacies and their interaction with both management actions and climate variability has a poorly characterized impact on the development of ecosystem functions and the trajectory of climate-carbon feedbacks. The complex structure-function relationships in wetlands foster delivery of valuable, climate sensitive, ecosystem services (carbon sequestration, nutrient removal, flood control, etc.) but also make them susceptible to colonization by invasive plants and lead to emission of key greenhouse gases. This project uses created wetland ecosystems as a model to understand how heterogeneity in antecedent conditions interacts with management options to create unique structure-function scenarios and a range of climate feedback outcomes. We utilized ongoing experiments in created wetlands that differ in antecedent conditions (crop agriculture, livestock grazing) and investigated how management options (invasive species removal, organic matter addition) interact with legacy impacts to promote key ecosystem functions, including greenhouse gas emissions, carbon sequestration, denitrification and plant biodiversity. The effects of antecedent land-use on soil chemistry, coupled with hydrologic patterns resulted in wetlands with divergent C and N dynamics despite their similar creation history. Additionally, the occurrence of extreme weather events (drought and excessive flooding) during the study period highlighted the overarching role that increased climate variability will play in determining key ecosystem processes in wetlands. Responses to management were linked to hydro-period: while organic matter addition successfully increased soil organic matter to more closely replicate natural systems at all sites, it had the largest impact on C and N cycling when soils were saturated. Overall, environmental conditions that promoted saturated soils, both those shaped by human activities or climate extremes, enhanced primary productivity, nutrient removal and greenhouse gas
Grain Composition and Functional Ingredients of Barley Varieties Created in Latvia
Directory of Open Access Journals (Sweden)
Šterna Vita
2015-09-01
Full Text Available Cereals, including barley, have been recognised as functional foods that provide beneficial effect on the health of the consumer and decrease the risk of various diseases. The aim of investigation was to determine the grain composition of barley varieties and perspective breeding lines bred in Latvia and to evaluate its functional ingredients. The results of analysis showed that protein content among varieties ranged from 106.6-146.8 g·kg-1, total dietary fibre 187.4-208.2 g·kg-1, β-glucans 42.8 g-49.4 g·kg-1, and amount of α-tocopherol 6.03-8.93 mg·kg-1. The sum of essential amino acids in barley grain samples was from 32.90 g·kg-1 to 38.71 g·kg-1. All varieties of hulled and hulless barley grain were found to be sources of protein with high biological value. Comparison of barley varieties bred in Latvia suggests that variety ‘Kornelija’ outperforms others in protein, dietary fibre and micronutrient content.
Full Text Available ... Food MyFoodAdvisor Recipes Association Cookbook Recipes Planning Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart-Healthy Foods Holiday Meal ...
Creating mechanisms of toxic substances emission of combustion engines
Directory of Open Access Journals (Sweden)
Jankowski Antoni
2015-12-01
Full Text Available The paper analyses the mechanisms of creation of toxic exhaust gases, which mainly derived from inexact fuel metering and improper air-fuel mixture preparation. The paper describes the process of creating toxic components in the exhaust gases of piston engines during engine operation, and impact on the emission of these components determining the composition of the fuel mixture determined equivalence factor Φ. The principal mechanisms of formation of toxic exhaust gases, in particular nitrogen oxides, carbon monoxide and hydrocarbons, and also essential according to create each of toxic exhaust gases are the subject of the paper. Moreover, empirical relationships, by means of which it is possible to determine the time of creation of the individual components of toxic exhaust gases, are presented. For example, one of the mechanisms for prompt formation of nitrogen oxides and hydrocarbons graphic illustration of formation as a function of crank angle is described. At the conclusion, the summary and significance of information on creation mechanisms of toxic components in the exhaust gases of piston engines are presented.
Software Development: 3D Animations and Creating User Interfaces for Realistic Simulations
Gordillo, Orlando Enrique
2015-01-01
My fall 2015 semester was spent at the Lyndon B. Johnson Space Center working in the Integrated Graphics, Operations, and Analysis Laboratory (IGOAL). My first project was to create a video animation that could tell the story of OMICS. OMICS is a term being used in the field of biomedical science to describe the collective technologies that study biological systems, such as what makes up a cell and how it functions with other systems. In the IGOAL I used a large 23 inch Wacom monitor to draw storyboards, graphics, and line art animations. I used Blender as the 3D environment to sculpt, shape, cut or modify the several scenes and models for the video. A challenge creating this video was to take a term used in biomedical science and describe it in such a way that an 8th grade student can understand. I used a line art style because it would visually set the tone for what we thought was an educational style. In order to get a handle on the perspective and overall feel for the animation without overloading my workspace, I split up the 2 minute animation into several scenes. I used Blender's python scripting capabilities which allowed for the addition of plugins to add or modify tools. The scripts can also directly interact with the objects to create naturalistic patterns or movements. After collecting the rendered scenes, I used Blender's built-in video editing workspace to output the animation. My second project was to write software that emulates a physical system's interface. The interface was to simulate a boat, ROV, and winch system. Simulations are a time and cost effective way to test complicated data and provide training for operators without having to use expensive hardware. We created the virtual controls with 3-D Blender models and 2-D graphics, and then add functionality in C# using the Unity game engine. The Unity engine provides several essential behaviors of a simulator, such as the start and update functions. A framework for Unity, which was developed in
[Language Functions in the Frontal Association Area: Brain Mechanisms That Create Language].
Yamamoto, Kayako; Sakai, Kuniyoshi L
2016-11-01
Broca's area is known to be critically involved in language processing for more than 150 years. Recent neuroimaging techniques, including functional magnetic resonance imaging (fMRI) and diffusion MRI, enabled the subdivision of Broca's area based on both functional and anatomical aspects. Networks among the frontal association areas, especially the left inferior frontal gyrus (IFG), and other cortical regions in the temporal/parietal association areas, are also important for language-related information processing. Here, we review how neuroimaging studies, combined with research paradigms based on theoretical linguistics, have contributed to clarifying the critical roles of the left IFG in syntactic processing and those of language-related networks, including cortical and cerebellar regions.
HTML5 games creating fun with HTML5, CSS3, and WebGL
Seidelin, Jacob
2011-01-01
Discover new opportunities for building 2D and 3D games with HTML5 The newest iteration of HTML, HTML5 can be used with JavaScript, CSS3, and WebGL to create beautiful, unique, engaging games that can be played on the web or mobile devices like the iPad or Android phones. Gone are the days where games were only possible with plugin technologies such as Flash and this cutting-edge book shows you how to utilize the latest open web technologies to create a game from scratch using Canvas, HTML5 Audio, WebGL, and WebSockets. You'll discover how to build a framework on which you will create your HTML5 game. Then each successive chapter covers a new aspect of the game, including user input, sound, multiplayer functionality, 2D and 3D graphics, and more. Aims directly at a new way to develop games for the web through the use of HTML5 Demonstrates how to make iOS and Android web apps Explains how to capture player input; create 3D graphics; and incorporate textures, lighting, and sound Guides you through the proce...
Full Text Available ... Risk Test Lower Your Risk Healthy Eating Overweight Smoking High Blood Pressure Physical Activity High Blood Glucose ... Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart- ...
Full Text Available ... Risk Test Lower Your Risk Healthy Eating Overweight Smoking High Blood Pressure Physical Activity High Blood Glucose ... Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets ...
Full Text Available ... Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with Heart-Healthy Foods Holiday Meal ... Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook ...
Full Text Available ... Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning for Vegetarian Diets Cook with ... Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy ...
Full Text Available ... Us in the Fight for a Cure Your tax-deductible gift today can fund critical diabetes research ... Close www.diabetes.org > Food and Fitness > Food > Planning Meals > Create Your Plate Share: Print Page Text ...
Full Text Available ... Recipes Association Cookbook Recipes Planning Meals Diabetes Meal Plans Create Your Plate Gluten Free Diets Meal Planning ... serving of dairy or both as your meal plan allows. Choose healthy fats in small amounts. For ...
Full Text Available ... Index Low-Calorie Sweeteners Sugar and Desserts Fitness Exercise & Type 1 Diabetes Get Started Safely Get And ... Plate Create Your Plate is a simple and effective way to manage your blood glucose levels and ...
Full Text Available ... Food Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy Foods donate en -- A Future Without Diabetes - a- ...
International spinal cord injury cardiovascular function basic data set
DEFF Research Database (Denmark)
Krassioukov, A; Alexander, M S; Karlsson, Anders Hans
2010-01-01
To create an International Spinal Cord Injury (SCI) Cardiovascular Function Basic Data Set within the framework of the International SCI Data Sets.......To create an International Spinal Cord Injury (SCI) Cardiovascular Function Basic Data Set within the framework of the International SCI Data Sets....
Allan, Bassan J; Perez, Enrique R; Tabbara, Marwan
2013-06-01
The Fistula First Breakthrough Initiative (FFBI) has been one of the most important national programs to help achieve considerable improvements in the care of patients on chronic hemodialysis. FFBI has helped place guidelines to push practitioners to reduce the use of tunneled central venous catheters and to increase the rate of arteriovenous fistula use in patients requiring chronic hemodialysis access. However, despite current guidelines, no specific protocols exist for the creation and management of autogenous arteriovenous fistulas and outcomes at most centers are below national benchmarks. In this study, we examine the effectiveness of a standard protocol used at our institution for the creation of autogenous upper extremity fistulas for hemodialysis access in achieving early cannulation and early removal of tunneled dialysis catheters. Our review encompasses 855 consecutive autogenous fistulas created over a 10-year period. Our findings suggest that the use of a standard protocol for creation and management of autogenous fistulas can help increase the rate of functional accesses over national benchmarks. Additionally, extension/conversion of malfunctioning fistulas to grafts appears to be an excellent method to expedite removal of a tunneled dialysis catheter with concomitant preservation of a fistula.
Creating Space Plasma from the Ground
2016-05-12
AFRL-AFOSR-VA-TR-2016-0179 CREATING SPACE PLASMA FROM THE GROUND Herbert C Carlson UTAH STATE UNIVERSITY Final Report 05/12/2016 DISTRIBUTION A...DATE (DD-MM-YYYY) 05/14/2016 2. REPORT TYPE Final 3. DATES COVERED (From - To) 08/14/2012-05/14/2016 4. TITLE AND SUBTITLE Creating space plasma from...Report (2016) Creating Space Plasma from the Ground Grant FA9550-11-1-0236 AFOSR Program Manager Dr. Kent Miller PI: Herbert C. Carlson Center for
Full Text Available ... 1 Type 2 About Us Online Community Meal Planning Sign In Search: Search More Sites Search ≡ Are ... Fitness Home Food MyFoodAdvisor Recipes Association Cookbook Recipes Planning Meals Diabetes Meal Plans Create Your Plate Gluten ...
Directory of Open Access Journals (Sweden)
Aleksandar Davchev
2017-06-01
Full Text Available Creating a work comfort should be a conscious and purposeful process that serves the right and inverse of the "worker-employer" system. Efficiency, quality, and sustainability in work relationships can be seen as a function of the efforts made to create an environment that saves the worker's psycho physiological status and contributes to his / her confidence, positiveness and dedication to the workplace. These processes should not be underestimated or chaotic, but constructive and basic and task for the managerial staff.
The immunological response created by interstitial and non-invasive laser immunotherapy
Bahavar, Cody F.; Zhou, Feifan; Hasanjee, Aamr M.; West, Connor L.; Nordquist, Robert E.; Hode, Tomas; Liu, Hong; Chen, Wei R.
2015-03-01
Laser immunotherapy (LIT) is an innovative cancer modality that uses laser irradiation and immunological stimulation to treat late-stage, metastatic cancers. LIT can be performed through either interstitial or non-invasive laser irradiation. Although LIT is still in development, recent clinical trials have shown that it can be used to successfully treat patients with late-stage breast cancer and melanoma. The development of LIT has been focused on creating an optimal immune response created by irradiating the tumor. One important factor that could enhance the immune response is the duration of laser irradiation. Irradiating the tumor for a shorter or longer amount of time could weaken the immune response created by LIT. Another factor that could weaken this immune response is the proliferation of regulatory T cells (TRegs) in response to the laser irradiation. However, low dose cyclophosphamide (CY) can help suppress the proliferation of TRegs and help create a more optimal immune response. An additional factor that could weaken the effectiveness of LIT is the selectivity of the laser. If LIT is performed non-invasively, then deeply embedded tumors and highly pigmented skin could cause an uneven temperature distribution inside the tumor. To solve this problem, an immunologically modified carbon nanotube system was created by using an immunoadjuvant known as glycated chitosan (GC) as a surfactant for single-walled carbon nanotubes (SWNTs) to immunologically modify SWNTs. SWNT-GC retains the optical properties of SWNTs and the immunological functions of GC to help increase the selectivity of the laser and create a more optimal immune response. In this preliminary study, tumor-bearing rats were treated with LIT either interstitially by an 805-nm laser with GC and low-dose CY, or non-invasively by a 980-nm laser with SWNT-GC. The goal was to observe the effects of CY on the immune response induced by LIT and to also determine the effect of irradiation duration for
Kinkingnehun, Serge R. J.; du Boisgueheneuc, Foucaud; Golmard, Jean-Louis; Zhang, Sandy X.; Levy, Richard; Dubois, Bruno
2004-04-01
We have developed a new technique to analyze correlations between brain anatomy and its neurological functions. The technique is based on the anatomic MRI of patients with brain lesions who are administered neuropsychological tests. Brain lesions of the MRI scans are first manually segmented. The MRI volumes are then normalized to a reference map, using the segmented area as a mask. After normalization, the brain lesions of the MRI are segmented again in order to redefine the border of the lesions in the context of the normalized brain. Once the MRI is segmented, the patient's score on the neuropsychological test is assigned to each voxel in the lesioned area, while the rest of the voxels of the image are set to 0. Subsequently, the individual patient's MRI images are superimposed, and each voxel is reassigned the average score of the patients who have a lesion at that voxel. A threshold is applied to remove regions having less than three overlaps. This process leads to an anatomo-functional map that links brain areas to functional loss. Other maps can be created to aid in analyzing the functional maps, such as one that indicates the 95% confidence interval of the averaged scores for each area. This anatomo-clinical overlapping map (AnaCOM) method was used to obtain functional maps from patients with lesions in the superior frontal gyrus. By finding particular subregions more responsible for a particular deficit, this method can generate new hypotheses to be tested by conventional group methods.
Creating mobile apps with Appcelerator Titanium
Brousseau, Christian
2013-01-01
Creating Mobile Apps with Appcelerator Titanium provides a hands-on approach and working examples on creating apps and games as well as embedding them onto a social networking website. Developers can then move on from there to develop their own applications based on the ones they have developed throughout the course of this book.""Creating Mobile Apps with Appcelerator Titanium"" is for developers who have experience with modern languages and development environments. Also, if you are familiar with the concepts of Object-oriented Programming (OOP), reusable components, AJAX closures, and so on
International Spinal Cord Injury Male Sexual Function Basic Data Set
DEFF Research Database (Denmark)
Alexander, M S; Biering-Sørensen, F; Elliott, S
2011-01-01
To create the International Spinal Cord Injury (SCI) Male Sexual Function Basic Data Set within the International SCI Data Sets.......To create the International Spinal Cord Injury (SCI) Male Sexual Function Basic Data Set within the International SCI Data Sets....
Wooldridge, Mike
2011-01-01
The easiest way to learn how to create a Web page for your family or organization Do you want to share photos and family lore with relatives far away? Have you been put in charge of communication for your neighborhood group or nonprofit organization? A Web page is the way to get the word out, and Creating Web Pages Simplified offers an easy, visual way to learn how to build one. Full-color illustrations and concise instructions take you through all phases of Web publishing, from laying out and formatting text to enlivening pages with graphics and animation. This easy-to-follow visual guide sho
Creating a culture where employee engagement Thrives
International Nuclear Information System (INIS)
Don Groover, C.S.P.
2007-01-01
Safety leaders across industries face a critical challenge: engaging employees. While engagement of a few people may be easy in short-term projects, it is significantly more difficult with long-term processes. In this session we show leaders how they can create a culture where workers are more open and even eager to be involved in safety efforts. Our experience with safety leaders in the nuclear industry has verified that when the factors that drive organizational functioning are understood, leaders are enabled to augment employee engagement and attain significant improvement in safety outcomes. The underlying factors that influence employee engagement, performance, outcomes, and organizational culture are the same the world over. We will also show how safety is capable, by its intrinsic value, of winning profound support and direct engagement of employees. In this session, we will examine how leaders can leverage their decisions and actions to win over employees to safety and support them in their endeavors to promote it. Using the safety leadership best practices Vision, Credibility, Accountability, Communication, Collaboration, Action Orientation, and Recognition and Feedback, leaders increase their impact on their organization in favor of a culture that supports safety and employee engagement. Leaders that create a climate and culture where employee engagement thrives, realize better safety results. Leadership is not exclusively an inborn talent; it can be developed and enhanced. To this end, we will also show the advantages of transformational leadership style by comparing it to more classical transactional leadership
Creating a culture where employee engagement Thrives
Energy Technology Data Exchange (ETDEWEB)
Don Groover, C.S.P. [Behavioral Science Technology, Ojai, CA (United States)
2007-07-01
Safety leaders across industries face a critical challenge: engaging employees. While engagement of a few people may be easy in short-term projects, it is significantly more difficult with long-term processes. In this session we show leaders how they can create a culture where workers are more open and even eager to be involved in safety efforts. Our experience with safety leaders in the nuclear industry has verified that when the factors that drive organizational functioning are understood, leaders are enabled to augment employee engagement and attain significant improvement in safety outcomes. The underlying factors that influence employee engagement, performance, outcomes, and organizational culture are the same the world over. We will also show how safety is capable, by its intrinsic value, of winning profound support and direct engagement of employees. In this session, we will examine how leaders can leverage their decisions and actions to win over employees to safety and support them in their endeavors to promote it. Using the safety leadership best practices Vision, Credibility, Accountability, Communication, Collaboration, Action Orientation, and Recognition and Feedback, leaders increase their impact on their organization in favor of a culture that supports safety and employee engagement. Leaders that create a climate and culture where employee engagement thrives, realize better safety results. Leadership is not exclusively an inborn talent; it can be developed and enhanced. To this end, we will also show the advantages of transformational leadership style by comparing it to more classical transactional leadership.
DEFF Research Database (Denmark)
Dahlberg, Rasmus; Guay, Fanny
2015-01-01
According to the EU, during the past five years, small and medium enterprises (SMEs) have created 85% of new jobs and two-thirds of private sector employment in the region. SMEs are considered the backbone of the economy in Europe and represent more than 95% of enterprises in USA and Australia....... They are considered more vulnerable to disasters because of their size. This paper argues, on the contrary, that SMEs also can be less vulnerable to sudden change than large corporations, drawing upon the ideas of Hayek and Taleb, and that networks of SMEs may contribute to the overall resilience of society...... if certain criteria are met. With this in mind, this paper will be examining how to create resilient SMEs. A well-known concept in the field is business continuity management. BCM is defined as “a holistic management process that identifies potential threats to an organization and the impacts to business...
Schopflocher, Donald; VanSpronsen, Eric; Spence, John C; Vallianatos, Helen; Raine, Kim D; Plotnikoff, Ronald C; Nykiforuk, Candace I J
2012-07-26
Detailed assessments of the built environment often resist data reduction and summarization. This project sought to develop a method of reducing built environment data to an extent that they can be effectively communicated to researchers and community stakeholders. We aim to help in an understanding of how these data can be used to create neighbourhood groupings based on built environment characteristics and how the process of discussing these neighbourhoods with community stakeholders can result in the development of community-informed health promotion interventions. We used the Irvine Minnesota Inventory (IMI) to assess 296 segments of a semi-rural community in Alberta. Expert raters "created" neighbourhoods by examining the data. Then, a consensus grouping was developed using cluster analysis, and the number of IMI variables to characterize the neighbourhoods was reduced by multiple discriminant function analysis. The 296 segments were reduced to a consensus set of 10 neighbourhoods, which could be separated from each other by 9 functions constructed from 24 IMI variables. Biplots of these functions were an effective means of summarizing and presenting the results of the community assessment, and stimulated community action. It is possible to use principled quantitative methods to reduce large amounts of information about the built environment into meaningful summaries. These summaries, or built environment neighbourhoods, were useful in catalyzing action with community stakeholders and led to the development of health-promoting built environment interventions.
Creating Web Sites The Missing Manual
MacDonald, Matthew
2006-01-01
Think you have to be a technical wizard to build a great web site? Think again. For anyone who wants to create an engaging web site--for either personal or business purposes--Creating Web Sites: The Missing Manual demystifies the process and provides tools, techniques, and expert guidance for developing a professional and reliable web presence. Like every Missing Manual, you can count on Creating Web Sites: The Missing Manual to be entertaining and insightful and complete with all the vital information, clear-headed advice, and detailed instructions you need to master the task at hand. Autho
Black, Jim
1995-01-01
This article proposes that college admissions officers interested in improving service should focus on creating customer delight rather than simply satisfaction, studying the system when things go wrong rather than placing blame, establishing employee well-being as the highest priority of the organization, providing necessary tools and training…
Creating student awareness to improve cultural competence: creating the critical incident.
Morell, Venita W; Sharp, Penny C; Crandall, Sonia J
2002-09-01
Teaching medical students to recognize the need for cultural competence and accept their shortcomings in this area is a challenge. A simulated patient scenario was developed to address this challenge. The objective of the simulation is to enhance students' readiness to learn by moving them from 'unconscious incompetence' to 'conscious incompetence'. The patient scenario presents a Cherokee Indian woman with a complaint of abnormal menstrual bleeding who is resistant to gynaecologic care from male providers. A faculty member facilitates a small-group videotape review of student interviews. As students discuss their encounters, they realize they 'misdiagnose' and mishandle the interview. They are confronted by their inability to recognize cultural cues and the impact they may have on health outcomes and begin to question whether cultural beliefs are affecting the care of other patients. This simulation creates an eye-opening situation that must be handled carefully. This activity is an effective method to create awareness in students who feel they 'know all this stuff.'
DEFF Research Database (Denmark)
McLisky, Claire Louise; Carey, Jane
Vedtagelsen af White Australien som regeringens politik i 1901 viser, at hvidheden var afgørende for den måde, hvorpå den nye nation i Australien blev konstitueret. Og alligevel har historikere i vid udstrækning overset hvidhed i deres studier af Australiens race fortid. 'Creating White Australia...
Full Text Available ... meal-planning, . In this section Food Planning Meals Diabetes Meal Plans and a Healthy Diet Create Your Plate Meal Planning for Vegetarian Diets Gluten Free Diets Holiday Meal Planning Cook with Heart-Healthy Foods donate en -- A Future Without Diabetes - a-future-without-diabetes-2.html A Future ...
Necessity of creating digital tools to ensure efficiency of technical means
Rakov, V. I.; Zakharova, O. V.
2018-05-01
The authors estimated the problems of functioning of technical objects. The article notes that the increasing complexity of automation systems may lead to an increase of the redundant resource in proportion to the number of components and relationships in the system, and to the need of the redundant resource constant change that can make implementation of traditional structures with redundancy unnecessarily costly (Standby System, Fault Tolerance, High Availability). It proposes the idea of creating digital tools to ensure efficiency of technical facilities.
Dunham, Kris; Melvin, Samantha
2011-01-01
Students are often encouraged to work together with their classmates, sometimes with other classes, occasionally with kids at other schools, but rarely with kids across the country. In this article the authors describe the Create Your State project, a collaborative nationwide project inspired by the Texas Chair Project wherein the artist, Damien…
Creating Innovative Opportunities
DEFF Research Database (Denmark)
Ljungberg, Daniel; McKelvey, Maureen; Lassen, Astrid Heidemann
2012-01-01
This paper develops lessons about how and why the founders and ventures involved in knowledge intensive entrepreneurship (KIE) manage the process of venture creation. The meta-analysis of the 86 case studies is based upon as conceptual model (from a systemic literature review), linked to illustra...... of knowledge networks to create innovative opportunities....
Positive effects of creating mandalas
Toroš, Maja
2016-01-01
The purpose of the present master’s thesis is to examine the psychological effects of creating mandalas and to give recommendations for a better use of the mandalas in the practice of art assistance in order to help in this way others and oneself. Mandalas are sacred symbols, used in Hinduism and Buddhist religion practices as tools for meditation and concentration. They are geometrical representations of the creation of the cosmos and schemas of all that was created. Jung sat the foundations...
Creating Safe Spaces for Music Learning
Hendricks, Karin S.; Smith, Tawnya D.; Stanuch, Jennifer
2014-01-01
This article offers a practical model for fostering emotionally safe learning environments that instill in music students a positive sense of self-belief, freedom, and purpose. The authors examine the implications for music educators of creating effective learning environments and present recommendations for creating a safe space for learning,…
Using endemic road features to create self-explaining roads and reduce vehicle speeds.
Charlton, Samuel G; Mackie, Hamish W; Baas, Peter H; Hay, Karen; Menezes, Miguel; Dixon, Claire
2010-11-01
This paper describes a project undertaken to establish a self-explaining roads (SER) design programme on existing streets in an urban area. The methodology focussed on developing a process to identify functional road categories and designs based on endemic road characteristics taken from functional exemplars in the study area. The study area was divided into two sections, one to receive SER treatments designed to maximise visual differences between road categories, and a matched control area to remain untreated for purposes of comparison. The SER design for local roads included increased landscaping and community islands to limit forward visibility, and removal of road markings to create a visually distinct road environment. In comparison, roads categorised as collectors received increased delineation, addition of cycle lanes, and improved amenity for pedestrians. Speed data collected 3 months after implementation showed a significant reduction in vehicle speeds on local roads and increased homogeneity of speeds on both local and collector roads. The objective speed data, combined with residents' speed choice ratings, indicated that the project was successful in creating two discriminably different road categories. 2010 Elsevier Ltd. All rights reserved.
Creating and Viewing HTML Files with Python
William J. Turkel; Adam Crymble
2012-01-01
This lesson uses Python to create and view an HTML file. If you write programs that output HTML, you can use any browser to look at your results. This is especially convenient if your program is automatically creating hyperlinks or graphic entities like charts and diagrams. Here you will learn how to create HTML files with Python scripts, and how to use Python to automatically open an HTML file in Firefox.
Creating sustainable performance.
Spreitzer, Gretchen; Porath, Christine
2012-01-01
What makes for sustainable individual and organizational performance? Employees who are thriving-not just satisfied and productive but also engaged in creating the future. The authors found that people who fit this description demonstrated 16% better overall performance, 125% less burnout, 32% more commitment to the organization, and 46% more job satisfaction than their peers. Thriving has two components: vitality, or the sense of being alive and excited, and learning, or the growth that comes from gaining knowledge and skills. Some people naturally build vitality and learning into their jobs, but most employees are influenced by their environment. Four mechanisms, none of which requires heroic effort or major resources, create the conditions for thriving: providing decision-making discretion, sharing information about the organization and its strategy, minimizing incivility, and offering performance feedback. Organizations such as Alaska Airlines, Zingerman's, Quicken Loans, and Caiman Consulting have found that helping people grow and remain energized at work is valiant on its own merits-but it can also boost performance in a sustainable way.
Journaling: creating space for "I".
Charles, Jennell P
2010-01-01
As nurses engaged in a caring profession, it is critical that we learn not only to care for others but also to care for ourselves. To care effectively for ourselves, we must create the space and time in which to do this. Journaling is one tool that scholars offer as a way to create this space. Although there is no clear consensus about the best techniques for journaling, there is evidence that journaling, as a reflective, meditative activity, can promote creativity, self-awareness, and personal development.
Creating and Viewing HTML Files with Python
Directory of Open Access Journals (Sweden)
William J. Turkel
2012-07-01
Full Text Available This lesson uses Python to create and view an HTML file. If you write programs that output HTML, you can use any browser to look at your results. This is especially convenient if your program is automatically creating hyperlinks or graphic entities like charts and diagrams. Here you will learn how to create HTML files with Python scripts, and how to use Python to automatically open an HTML file in Firefox.
On Creating and Sustaining Alternatives
DEFF Research Database (Denmark)
Kyng, Morten
2015-01-01
This paper presents and discusses an initiative aimed at creating direct and long lasting influence on the use and development of telemedicine and telehealth by healthcare professionals, patients and citizens. The initiative draws on ideas, insights, and lessons learned from Participatory Design...... (PD) as well as from innovation theory and software ecosystems. Last, but not least, the ongoing debate on public finances/economy versus tax evasion by major private companies has been an important element in shaping the vision and creating support for the initiative. This vision is about democratic...
Density matrix of a quantum field in a particle-creating background
International Nuclear Information System (INIS)
Gavrilov, S.P.; Gitman, D.M.; Tomazelli, J.L.
2008-01-01
We examine the time evolution of a quantized field in external backgrounds that violate the stability of vacuum (particle-creating backgrounds). Our purpose is to study the exact form of the final quantum state (the density operator at the final instant of time) that has emerged from a given arbitrary initial state (from a given arbitrary density operator at the initial time instant) in the course of evolution. We find a generating functional that allows one to obtain density operators for an arbitrary initial state. Averaging over states of the subsystem of antiparticles (particles), we obtain explicit forms of reduced density operators for the subsystem of particles (antiparticles). Analyzing one-particle correlation functions, we establish a one-to-one correspondence between these functions and the reduced density operators. It is shown that in the general case a presence of bosons (e.g., gluons) in the initial state increases the creation rate of the same type of bosons. We discuss the question (and its relation to the initial stage of quark-gluon plasma formation) whether a thermal form of one-particle distribution can appear even if the final state of the complete system is not in thermal equilibrium. In this respect, we discuss some cases when pair-creation by an electric-like field can mimic the one-particle thermal distribution. We apply our technics to some QFT problems in slowly varying electric-like backgrounds: electric, SU(3) chromoelectric, and metric. In particular, we analyze the time and temperature behavior of the mean numbers of created particles, provided that the effects of switching the external field on and off are negligible. It is demonstrated that at high temperatures and in slowly varying electric fields the rate of particle-creation is essentially time-dependent
Density matrix of a quantum field in a particle-creating background
Energy Technology Data Exchange (ETDEWEB)
Gavrilov, S.P. [Instituto de Fisica, Universidade de Sao Paulo, Caixa Postal 66318, CEP 05315-970 Sao Paulo, SP (Brazil)], E-mail: gavrilovsergeyp@yahoo.com; Gitman, D.M. [Instituto de Fisica, Universidade de Sao Paulo, Caixa Postal 66318, CEP 05315-970 Sao Paulo, SP (Brazil)], E-mail: gitman@dfn.if.usp.br; Tomazelli, J.L. [Instituto de Fisica, Universidade de Sao Paulo, Caixa Postal 66318, CEP 05315-970 Sao Paulo, SP (Brazil)], E-mail: tomazelli@fsc.ufsc.br
2008-06-01
We examine the time evolution of a quantized field in external backgrounds that violate the stability of vacuum (particle-creating backgrounds). Our purpose is to study the exact form of the final quantum state (the density operator at the final instant of time) that has emerged from a given arbitrary initial state (from a given arbitrary density operator at the initial time instant) in the course of evolution. We find a generating functional that allows one to obtain density operators for an arbitrary initial state. Averaging over states of the subsystem of antiparticles (particles), we obtain explicit forms of reduced density operators for the subsystem of particles (antiparticles). Analyzing one-particle correlation functions, we establish a one-to-one correspondence between these functions and the reduced density operators. It is shown that in the general case a presence of bosons (e.g., gluons) in the initial state increases the creation rate of the same type of bosons. We discuss the question (and its relation to the initial stage of quark-gluon plasma formation) whether a thermal form of one-particle distribution can appear even if the final state of the complete system is not in thermal equilibrium. In this respect, we discuss some cases when pair-creation by an electric-like field can mimic the one-particle thermal distribution. We apply our technics to some QFT problems in slowly varying electric-like backgrounds: electric, SU(3) chromoelectric, and metric. In particular, we analyze the time and temperature behavior of the mean numbers of created particles, provided that the effects of switching the external field on and off are negligible. It is demonstrated that at high temperatures and in slowly varying electric fields the rate of particle-creation is essentially time-dependent.
Creating the networking enterprises - logistics determinants
Directory of Open Access Journals (Sweden)
Ewa Kulińska
2014-06-01
Full Text Available Background: The article describes the determinants of creating network enterprises with peculiar consideration of logistic factors which are conditioning the organization of processes, exchange of resources and competences. On the basis of literature analysis, there is proposed a model of creating network enterprises. A model is verified in the application part of the thesis. Methods: Within the publication a literature review of submitted scope of the interest was presented, as well as the empirical research. A research substance attaches the enterprises created on the basis of the reactivation of organizations which has collapsed due to bankruptcy proceeding. The research was based upon direct interviews with employees of the net-forming entities. Results and conclusions: Results of the research shows that taking up the cooperation and net-cooperation was the only possibility for new entities to come into existence, that were based upon old assets and human resources liquidated during bankruptcy proceeding. There was indentified many determinants of enterprises network cooperation, however due to the research a conclusion draws, that basic factors of creating network cooperation are those which are profit-achieving oriented.
Creating and purifying an observation instrument using the generalizability theory
Directory of Open Access Journals (Sweden)
Elena Rodríguez-Naveiras
2013-12-01
Full Text Available The control of quality of data it is one of the most relevant aspects in observational researches. The Generalizability Theory (GT provides a method of analysis that allows us to isolate the various sources of error measurement. At the same time, it helps us to determine the extent to which various factors can change and analyze the effect on the generalizability coefficient. In the work shown here, there are two studies aimed to creating and purifying an observation instrument, Observation Protocol in the Teaching Functions (Protocolo de Funciones Docentes, PROFUNDO, v1 and v2, for behavioral assessment which has been carried out by instructors in a social-affective out-of-school program. The reliability and homogeneity studies are carried out once the instrument has been created and purified. The reliability study will be done through the GT method taking both codes (c and agents (a as differential facets in. The generalization will be done through observers using a crossed multi-faceted design (A × O × C. In the homogeneity study the generalization facet will be done through codes using the same design that the reliability study.
Gender differentiation in the Bible: created and recognized
African Journals Online (AJOL)
This paper, however, does not discuss the issue of the treament of women in ... obvious here is that God did not create another 'adam, but he created 'issha who .... According to 1:27, God created 'adam in his image.27 Here, the singular in v. ...... Theological Interpretation of Genesis 1-3 (New York: The MacMillan Company,.
Hussain, M.; Chen, D.
2014-11-01
Buildings, the basic unit of an urban landscape, host most of its socio-economic activities and play an important role in the creation of urban land-use patterns. The spatial arrangement of different building types creates varied urban land-use clusters which can provide an insight to understand the relationships between social, economic, and living spaces. The classification of such urban clusters can help in policy-making and resource management. In many countries including the UK no national-level cadastral database containing information on individual building types exists in public domain. In this paper, we present a framework for inferring functional types of buildings based on the analysis of their form (e.g. geometrical properties, such as area and perimeter, layout) and spatial relationship from large topographic and address-based GIS database. Machine learning algorithms along with exploratory spatial analysis techniques are used to create the classification rules. The classification is extended to two further levels based on the functions (use) of buildings derived from address-based data. The developed methodology was applied to the Manchester metropolitan area using the Ordnance Survey's MasterMap®, a large-scale topographic and address-based data available for the UK.
Directory of Open Access Journals (Sweden)
Gilbert Mahlangu
2018-01-01
Full Text Available ICT knowledge hubs are important resources for a country to grow towards an innovative economy. Their growth has been viewed as a node point for techno-prenuership development and economic sustainability by many countries. The purpose of this study was to establish how Zimbabwe as a developing country should move towards the creation of an ICT knowledge hub that will promote economic growth in line with the Zimbabwe Agenda for Sustainable Socio-Economic Transformation (ZimAsset economic blueprint crafted in 2013. A qualitative research design was used whereby literature was conducted to establish models for ICT Knowledge hub creation while two focus group discussions were held with academia, research agents and software developers to achieve face validity and in-depth interviews were held with officials from The Ministry of ICT Postal and Courier services. The consensus was reached on the need for creating a focal point which will act as a cyber-port where ICT driven solutions can be obtained based on the industry needs. The focus group discussions settled for four components in creating an ICT knowledge hub. These are planning function, development function, management function and co-ordinating function. The research also established that the Ministry of ICT and Courier services in Zimbabwe has set up an innovation fund to encourage and reward innovation and craftsmanship in Zimbabwe mainly targeted at the youths. The government acquired the high-performance computing facility which is stationed at the University of Zimbabwe. The ICT hub should be used to facilitate access and use of this resource. Every country should therefore strive to create its own centre of innovation which enables it to gain maximum utility from its indigenous people in order to fully utilise ICTs for industry development and spearhead economic growth. The study recommends that there is need for establishing an ICT Knowledge hub in the country.
Rehand: Realistic electric prosthetic hand created with a 3D printer.
Yoshikawa, Masahiro; Sato, Ryo; Higashihara, Takanori; Ogasawara, Tsukasa; Kawashima, Noritaka
2015-01-01
Myoelectric prosthetic hands provide an appearance with five fingers and a grasping function to forearm amputees. However, they have problems in weight, appearance, and cost. This paper reports on the Rehand, a realistic electric prosthetic hand created with a 3D printer. It provides a realistic appearance that is same as the cosmetic prosthetic hand and a grasping function. A simple link mechanism with one linear actuator for grasping and 3D printed parts achieve low cost, light weight, and ease of maintenance. An operating system based on a distance sensor provides a natural operability equivalent to the myoelectric control system. A supporter socket allows them to wear the prosthetic hand easily. An evaluation using the Southampton Hand Assessment Procedure (SHAP) demonstrated that an amputee was able to operate various objects and do everyday activities with the Rehand.
Two process chains for creating functional surfaces on mold for 3D geometry
DEFF Research Database (Denmark)
Zhang, Yang; Hansen, Hans Nørgaard; Pedersen, David Bue
. This paper describes and compares 2 approaches for fabricating micro- structured surfaces suitable for patterning of 3D shape cavity for injection moulding. The application investigated for the research is a part of a fixture for electrodes to be implanted inside human body. It is a ring with four wings......Polymer products with functional surfaces are applied in many fields such as medical and bio technology [1][2]. It is believed that certain types of micro- or nano- structured surfaces can enhance tissue anchoring [3]. However, most technologies for the fabrication of micro-structured functional...... surfaces are still limited to flat geometries or geometries with constant curvature [4] . Typically products that need micro structuring on the surface have a three dimensional and complex geometry. There are huge demand for investigation in establishing the micro structures on the surface of a 3D mold...
How Patent Function Integration with R&D Influence the Value of Patents
DEFF Research Database (Denmark)
Beukel, Karin; Valentin, Finn
Patent strategies are endogenous to firm appropriability. However, to what extent does firm’s R&D teams’ engagement with patent experts influence the value of patents? We estimate the relationship between firm’s R&D use of patent functions on patent value in Biotech firms. Controlling...... for characteristics of scientific team, firm effects, and other patent value indicators, we find that having a firm specific (in-house) internal patent function is a driver of patent value. In addition, we find that the way in which patent functions create patent value differs dependent on whether the firm has...... internal patent function or not. In-house patent functions create value through narrow patents, whereas, firms with no in-house patent function create valuable patents by the use of broader scoped patents. Our results point to a strong effect of firm specific patent functions, but also explain how firms...
Innovation for creating a smart future
Directory of Open Access Journals (Sweden)
Sang M. Lee
2018-01-01
Full Text Available Today, we live in a dynamic and turbulent global community. The wave of mega-trends, including rapid change in globalization and technological advances, is creating new market forces. For any organization to survive and prosper in such an environment, innovation is imperative. However, innovation is no longer just for creating value to benefit individuals, organizations, or societies. The ultimate purpose of innovation should be much more far reaching, helping create a smart future where people can enjoy the best quality of life possible. Thus, innovation must search for intelligent solutions to tackle major social ills, seek more proactive approaches to predict the uncertain future, and pursue strategies to remove barriers to the smart future. This study explores the detailed requirements of a smart future, including both hardware types and soft social/cultural components.
Selective functionalization of patterned glass surfaces
Ploetz, E.; Visser, B.; Slingenbergh, W.; Evers, K.; Martinez-Martinez, D.; Pei, Y. T.; Feringa, B. L.; De Hosson, J. Th. M.; Cordes, T.; van Dorp, W. F.
2014-01-01
Tailored writing and specific positioning of molecules on nanostructures is a key step for creating functional materials and nano-optical devices, or interfaces for synthetic machines in various applications. We present a novel approach for the selective functionalization of patterned glass surfaces
International Spinal Cord Injury Female Sexual and Reproductive Function Basic Data Set
DEFF Research Database (Denmark)
Alexander, M S; Biering-Sørensen, F; Elliott, S
2011-01-01
To create the International Spinal Cord Injury (SCI) Female Sexual and Reproductive Function Basic Data Set within the International SCI Data Sets.......To create the International Spinal Cord Injury (SCI) Female Sexual and Reproductive Function Basic Data Set within the International SCI Data Sets....
Energy Technology Data Exchange (ETDEWEB)
NONE
1992-03-01
The research and development project has been started to develop the technologies for superhigh-purity separation/processing; controlling ultrafine crystal particles, including creating composites by the aid of a plasma laser; synthesizing highly functional organic materials; and supporting these technologies, for creating functions, e.g., advanced sensing functions, highly functional electromagnetic characteristics, and corrosion resistance, heat resistance and high strength. The R and D program for the technologies for superhigh-purity separation/processing covers development of highly corrosion-resistant, high-sensitivity gas sensors and highly functional thin oxide film sensors. The R and D program for controlling ultrafine crystal particles covers the researches on the technologies for creating inclined structures by the ion composite vapor-phase process, and the technologies for producing composites by the aid of a plasma laser. The R and D program for the organic material synthesis technologies includes researches on the technologies for controlling higher structures in a molecular beam composite reaction field, and on the technologies for synthesizing materials in a photon composite reaction field and in an interfacial composite reaction field. The R and D program for the supporting technologies includes the researches on the technologies for diagnosing a composite reaction field by the laser-aided ionization method. In the FY 1991, which is essentially the first year for the project, the efforts are directed to designs and construction of the required facilities, and preliminary tests. (NEDO)
Creating Societal Benefits and Corporate Profits
Raisch, Sebastian; Probst, Gilbert; Gomez, Peter; Zimmermann, Alexander
2014-01-01
The odds of launching a new business that creates value for both the company and the public can be improved with good planning. An in-depth analysis of how four companies created for-profit initiatives that also have high societal value suggests that each followed a similar step-by-step process to achieve what the researchers call synergistic value creation. Those steps include establishing cross-business incubators and installing multi-perspective monitoring systems.
Sathish, Shivani; Ricoult, Sébastien G; Toda-Peters, Kazumi; Shen, Amy Q
2017-05-21
Microfluidic systems integrated with protein and DNA micro- and nanoarrays have been the most sought-after technologies to satisfy the growing demand for high-throughput disease diagnostics. As the sensitivity of these systems relies on the bio-functionalities of the patterned recognition biomolecules, the primary concern has been to develop simple technologies that enable biomolecule immobilization within microfluidic devices whilst preserving bio-functionalities. To address this concern, we introduce a two-step patterning approach to create micro- and nanoarrays of biomolecules within microfluidic devices. First, we introduce a simple aqueous based microcontact printing (μCP) method to pattern arrays of (3-aminopropyl)triethoxysilane (APTES) on glass substrates, with feature sizes ranging from a few hundred microns down to 200 nm (for the first time). Next, these substrates are integrated with microfluidic channels to then covalently couple DNA aptamers and antibodies with the micro- and nanopatterned APTES. As these biomolecules are covalently tethered to the device substrates, the resulting bonds enable them to withstand the high shear stresses originating from the flow in these devices. We further demonstrated the flexibility of this technique, by immobilizing multiple proteins onto these APTES-patterned substrates using liquid-dispensing robots to create multiple microarrays. Next, to validate the functionalities of these microfluidic biomolecule microarrays, we perform (i) aptamer-based sandwich immunoassays to detect human interleukin 6 (IL6); and (ii) antibody-based sandwich immunoassays to detect human c-reactive protein (hCRP) with the limit of detection at 5 nM, a level below the range required for clinical screening. Lastly, the shelf-life potential of these ready-to-use microfluidic microarray devices is validated by effectively functionalizing the patterns with biomolecules up to 3 months post-printing. In summary, with a single printing step, this
Directory of Open Access Journals (Sweden)
Timothy J Cashman
Full Text Available Hypertrophic cardiomyopathy (HCM is a leading cause of sudden cardiac death that often goes undetected in the general population. HCM is also prevalent in patients with cardio-facio-cutaneous syndrome (CFCS, which is a genetic disorder characterized by aberrant signaling in the RAS/MAPK signaling cascade. Understanding the mechanisms of HCM development in such RASopathies may lead to novel therapeutic strategies, but relevant experimental models of the human condition are lacking. Therefore, the objective of this study was to develop the first 3D human engineered cardiac tissue (hECT model of HCM. The hECTs were created using human cardiomyocytes obtained by directed differentiation of induced pluripotent stem cells derived from a patient with CFCS due to an activating BRAF mutation. The mutant myocytes were directly conjugated at a 3:1 ratio with a stromal cell population to create a tissue of defined composition. Compared to healthy patient control hECTs, BRAF-hECTs displayed a hypertrophic phenotype by culture day 6, with significantly increased tissue size, twitch force, and atrial natriuretic peptide (ANP gene expression. Twitch characteristics reflected increased contraction and relaxation rates and shorter twitch duration in BRAF-hECTs, which also had a significantly higher maximum capture rate and lower excitation threshold during electrical pacing, consistent with a more arrhythmogenic substrate. By culture day 11, twitch force was no longer different between BRAF and wild-type hECTs, revealing a temporal aspect of disease modeling with tissue engineering. Principal component analysis identified diastolic force as a key factor that changed from day 6 to day 11, supported by a higher passive stiffness in day 11 BRAF-hECTs. In summary, human engineered cardiac tissues created from BRAF mutant cells recapitulated, for the first time, key aspects of the HCM phenotype, offering a new in vitro model for studying intrinsic mechanisms and
Chen, Alice Y.; McKee, Nancy
1999-01-01
Describes the developmental process used to visualize the calcium ATPase enzyme of the sarcoplasmic reticulum which involves evaluating scientific information, consulting scientists, model making, storyboarding, and creating and editing in a computer medium. (Author/CCM)
Creating Gaze Annotations in Head Mounted Displays
DEFF Research Database (Denmark)
Mardanbeigi, Diako; Qvarfordt, Pernilla
2015-01-01
To facilitate distributed communication in mobile settings, we developed GazeNote for creating and sharing gaze annotations in head mounted displays (HMDs). With gaze annotations it possible to point out objects of interest within an image and add a verbal description. To create an annota- tion...
Can Physical Examination Create a Stener Lesion?
Lankachandra, Manesha; Eggers, John P; Bogener, James W; Hutchison, Richard L
2017-09-01
The purpose of this study is to determine whether a Stener lesion can be created while testing stability of the ulnar collateral ligament (UCL) of the thumb. Testing was performed in a manner that reproduced clinical examination. Six fresh frozen hand and forearm specimens underwent sequential sectioning of the accessory UCL, the proper UCL, and the ulnar sagittal band. Measurements of radial deviation of the metacarpophalangeal (MCP) joint were taken with the thumb in neutral rotation, pronation and supination, both with 0 degrees and with 30 degrees of flexion of the MCP joint. Visual examination was performed to assess the presence of a Stener lesion. No Stener lesion was created in any position as long as the fascial origin of the ulnar sagittal band at the adductor pollicis longus remained intact. After creating a defect in the ulnar sagittal band, a Stener lesion was created in two specimens, but only when the thumb was flexed and supinated. Pronation provided more stability, and supination provided less stability, with one or both components cut, especially when testing at 30° of flexion. Compared to both components cut without flexion or rotation, there was a statistically significant difference in angulation with the 30 degrees of MCP joint flexion in both neutral rotation in supination. Performing a physical examination to assess the amount of instability of an ulnar collateral ligament injury did not create a Stener lesion if the exam was performed in a controlled, gentle manner with the thumb held without rotation. If the thumb is held in neutral rotation during the exam, an iatrogenic Stener lesion should not be created.
CREATING A CORPORATE ENTREPRENEURSHIP STRATEGY FOR COMPETITIVE ADVANTAGE
ENGİNOĞLU, Didem; ARIKAN, Cenk Laçin
2016-01-01
Current competitive environment is rapidly changing. In today’s business environment, organizations are having an increasingly difficult time in creating competitive advantages. The main reason for this is the ease in contemporary business life for organizations to reach the same or very similar resources. Firms need innovation to create and sustain success and effectiveness. In such a highly competitive business life, the importance of creating competitive advantages for organizations based ...
DEFF Research Database (Denmark)
Mailund, Thomas
Master functions and discover how to write functional programs in R. In this book, you'll make your functions pure by avoiding side-effects; you’ll write functions that manipulate other functions, and you’ll construct complex functions using simpler functions as building blocks. In Functional...... Programming in R, you’ll see how we can replace loops, which can have side-effects, with recursive functions that can more easily avoid them. In addition, the book covers why you shouldn't use recursion when loops are more efficient and how you can get the best of both worlds. Functional programming...... functions by combining simpler functions. You will: Write functions in R including infix operators and replacement functions Create higher order functions Pass functions to other functions and start using functions as data you can manipulate Use Filer, Map and Reduce functions to express the intent behind...
Creating a Servitude to solve an encroachment Dispute: A Solution or creating another Problem?
Directory of Open Access Journals (Sweden)
Zsa-Zsa Temmers Boggenpoel
2013-12-01
Full Text Available The main focus of this note is the case of Roseveare v Katmer, Katmer v Roseveare 2013 ZAGPJHC 18, which provides an interesting (though possibly constitutionally problematic perspective to the encroachment problem. The decision in this case has opened the door for courts to create servitudes in instances where encroachments are left intact based on policy reasons. Concerning these policy reasons, the note investigates the reasonableness standard as it was applied in the case. It is argued that it is important to differentiate between the applications of reasonableness in encroachment cases and alleged nuisance disputes. The decision in this case creates the impression that courts may now order that a servitude be registered in favour of the encroacher against the affected landowner’s property. It seems as though the court had in mind the creation of a praedial servitude to justify the continued existence of the encroachment. The servitude is created by court order against the will of the affected landowner. At common law, the creation of a servitude in this respect does not exist, and the authority from which the power derives to make an order like this is not entirely clear. The court also does not provide any authority for the creation of the servitude in favour of the encroacher. Consequently, it is argued that this may have serious constitutional implications. For one, lack of authority for the deprivation that results may be unconstitutional because there is no law of general application that authorises the deprivation in terms of section 25(1. The creation of a servitude to explain the continued existence of the encroachment is not automatically included in the general discretion to replace removal with compensation. It is contended that an order that forces the affected landowner to register a servitude in favour of the encroacher to preserve the existing encroachment situation will be in conflict with section 25(1 as far as the common
Creating a Classroom Makerspace
Rivas, Luz
2014-01-01
What is a makerspace? Makerspaces are community-operated physical spaces where people (makers) create do-it-yourself projects together. These membership spaces serve as community labs where people learn together and collaborate on projects. Makerspaces often have tools and equipment like 3-D printers, laser cutters, and soldering irons.…
System and method for creating expert systems
Hughes, Peter M. (Inventor); Luczak, Edward C. (Inventor)
1998-01-01
A system and method provides for the creation of a highly graphical expert system without the need for programming in code. An expert system is created by initially building a data interface, defining appropriate Mission, User-Defined, Inferred, and externally-generated GenSAA (EGG) data variables whose data values will be updated and input into the expert system. Next, rules of the expert system are created by building appropriate conditions of the rules which must be satisfied and then by building appropriate actions of rules which are to be executed upon corresponding conditions being satisfied. Finally, an appropriate user interface is built which can be highly graphical in nature and which can include appropriate message display and/or modification of display characteristics of a graphical display object, to visually alert a user of the expert system of varying data values, upon conditions of a created rule being satisfied. The data interface building, rule building, and user interface building are done in an efficient manner and can be created without the need for programming in code.
Cell functional enviromics: Unravelling the function of environmental factors
Directory of Open Access Journals (Sweden)
Alves Paula M
2011-06-01
Full Text Available Abstract Background While functional genomics, focused on gene functions and gene-gene interactions, has become a very active field of research in molecular biology, equivalent methodologies embracing the environment and gene-environment interactions are relatively less developed. Understanding the function of environmental factors is, however, of paramount importance given the complex, interactive nature of environmental and genetic factors across multiple time scales. Results Here, we propose a systems biology framework, where the function of environmental factors is set at its core. We set forth a "reverse" functional analysis approach, whereby cellular functions are reconstructed from the analysis of dynamic envirome data. Our results show these data sets can be mapped to less than 20 core cellular functions in a typical mammalian cell culture, while explaining over 90% of flux data variance. A functional enviromics map can be created, which provides a template for manipulating the environmental factors to induce a desired phenotypic trait. Conclusion Our results support the feasibility of cellular function reconstruction guided by the analysis and manipulation of dynamic envirome data.
Pharmacy Benefit Management Companies: Do They Create Value in the US Healthcare System?
Lyles, Alan
2017-05-01
Pharmacy benefit management companies (PBMs) perform functions in the US market-based healthcare system that may be performed by public agencies or quasi-public institutions in other nations. By aggregating lives covered under their many individual contracts with payers, PBMs have formidable negotiating power. They influence pharmaceutical insurance coverage, design the terms of coverage in a plan's drug benefit, and create competition among providers for inclusion in a plan's network. PBMs have, through intermediation, the potential to secure lower drug prices and to improve rational prescribing. Whether these potential outcomes are realized within the relevant budget is a function of the healthcare system and the interaction of benefit design and clinical processes-not just individually vetted components. Efficiencies and values achieved in price discounts and cost sharing can be nullified if there is irrational prescribing (over-utilization, under-utilization and mis-utilization), variable patient adherence to medication regimens, ineffective formulary processes, or fraud, waste and abuse. Rising prescription drug costs and the increasing prevalence of 'high deductible health plans', which require much greater patient out-of-pocket costs, is creating a crisis for PBM efforts towards an affordable pharmacy benefit. Since PBM rebate and incentive contracts are opaque to the public, whether they add value by restraining higher drug prices or benefit from them is debatable.
Bayesian error estimation in density-functional theory
DEFF Research Database (Denmark)
Mortensen, Jens Jørgen; Kaasbjerg, Kristen; Frederiksen, Søren Lund
2005-01-01
We present a practical scheme for performing error estimates for density-functional theory calculations. The approach, which is based on ideas from Bayesian statistics, involves creating an ensemble of exchange-correlation functionals by comparing with an experimental database of binding energies...
From boundaries to boundary work: middle managers creating inter-organizational change.
Oldenhof, Lieke; Stoopendaal, Annemiek; Putters, Kim
2016-11-21
Purpose In healthcare, organizational boundaries are often viewed as barriers to change. The purpose of this paper is to show how middle managers create inter-organizational change by doing boundary work: the dual act of redrawing boundaries and coordinating work in new ways. Design/methodology/approach Theoretically, the paper draws on the concept of boundary work from Science and Technology Studies. Empirically, the paper is based on an ethnographic investigation of middle managers that participate in a Dutch reform program across health, social care, and housing. Findings The findings show how middle managers create a sense of urgency for inter-organizational change by emphasizing "fragmented" service provision due to professional, sectoral, financial, and geographical boundaries. Rather than eradicating these boundaries, middle managers change the status quo gradually by redrawing composite boundaries. They use boundary objects and a boundary-transcending vocabulary emphasizing the need for societal gains that go beyond production targets of individual organizations. As a result, work is coordinated in new ways in neighborhood teams and professional expertise is being reconfigured. Research limitations/implications Since boundary workers create incremental change, it is necessary to follow their work for a longer period to assess whether boundary work contributes to paradigm change. Practical implications Organizations should pay attention to conditions for boundary work, such as legitimacy of boundary workers and the availability of boundary spaces that function as communities of practice. Originality/value By shifting the focus from boundaries to boundary work, this paper gives valuable insights into "how" boundaries are redrawn and embodied in objects and language.
DEFF Research Database (Denmark)
Al-Mashhadi, Rozh Husain; Sørensen, Charlotte Brandt; Kragh, Peter M.
2013-01-01
dominant hypercholesterolemia and accelerates atherosclerosis in humans. Using Sleeping Beauty DNA transposition and cloning by somatic cell nuclear transfer, we created Yucatan minipigs with liver-specific expression of human D374Y-PCSK9. D374Y-PCSK9 transgenic pigs displayed reduced hepatic low...
Directory of Open Access Journals (Sweden)
O. Heidmann
2015-11-01
Full Text Available Serious games are video games designed to achieve an educational effect and achieve some degree of training in a certain area. They are nowadays used in industries such as defense, education, scientific exploration, health care, emergency management, city planning, engineering, and many others. As it still a nascent subject who doesn’t follow exactly the same rules and practices than the commercial video games industry, questions remain about how to create and use serious games. This article presents some know-how on the subject of creating serious games.
Creating Pupils' Internet Magazine
Bognar, Branko; Šimic, Vesna
2014-01-01
This article presents an action research, which aimed to improve pupils' literary creativity and enable them to use computers connected to the internet. The study was conducted in a small district village school in Croatia. Creating a pupils' internet magazine appeared to be an excellent way for achieving the educational aims of almost all…
Bricklayer: An Authentic Introduction to the Functional Programming Language SML
Directory of Open Access Journals (Sweden)
Victor Winter
2014-12-01
Full Text Available Functional programming languages are seen by many as instrumental to effectively utilizing the computational power of multi-core platforms. As a result, there is growing interest to introduce functional programming and functional thinking as early as possible within the computer science curriculum. Bricklayer is an API, written in SML, that provides a set of abstractions for creating LEGO artifacts which can be viewed using LEGO Digital Designer. The goal of Bricklayer is to create a problem space (i.e., a set of LEGO artifacts that is accessible and engaging to programmers (especially novice programmers while providing an authentic introduction to the functional programming language SML.
Creating Math Videos: Comparing Platforms and Software
Abbasian, Reza O.; Sieben, John T.
2016-01-01
In this paper we present a short tutorial on creating mini-videos using two platforms--PCs and tablets such as iPads--and software packages that work with these devices. Specifically, we describe the step-by-step process of creating and editing videos using a Wacom Intuos pen-tablet plus Camtasia software on a PC platform and using the software…
Creating a career legacy map to help assure meaningful work in nursing.
Hinds, Pamela S; Britton, Dorienda R; Coleman, Lael; Engh, Eileen; Humbel, Tina Kunze; Keller, Susan; Kelly, Katherine Patterson; Menard, Johanna; Lee, Marlene A; Roberts-Turner, Renee; Walczak, Dory
2015-01-01
When nurses declare a professional legacy (or what they intend to be better in health care because of their efforts), they are likely to maintain a focus on achieving their legacy and to experience meaning in the process. We depict the legacy and involved steps in creating a legacy map, which is a concrete guide forward to intended career outcomes. Informed by the "meaningful work" literature, we describe a legacy map, its function, the process to create one, and the application of a legacy map to guide careers. We also describe an administrative benefit of the legacy map-the map can be used by team leaders and members to secure needed resources and opportunities to support the desired legacy of team members. Legacy mapping can be a self-use career guidance tool for nurses and other health care professionals or a tool that links the career efforts of a team member with the career support efforts of a team leader. Copyright © 2015 Elsevier Inc. All rights reserved.
Density functional theory of the electrical double layer: the RFD functional
International Nuclear Information System (INIS)
Gillespie, Dirk; Valisko, Monika; Boda, Dezso
2005-01-01
Density functional theory (DFT) of electrolytes is applied to the electrical double layer under a wide range of conditions. The ions are charged, hard spheres of different size and valence, and the wall creating the double layer is uncharged, weakly charged, and strongly charged. Under all conditions, the density and electrostatic potential profiles calculated using the recently proposed RFD electrostatic functional (Gillespie et al 2002 J. Phys.: Condens. Matter 14 12129; 2003 Phys. Rev. E 68 031503) compare well to Monte Carlo simulations. When the wall is strongly charged, the RFD functional results agree with the results of a simpler perturbative electrostatic DFT, but the two functionals' results qualitatively disagree when the wall is uncharged or weakly charged. The RFD functional reproduces these phenomena of weakly charged double layers. It also reproduces bulk thermodynamic quantities calculated from pair correlation functions
Creating dynamic UI with Android fragments
Wilson, Jim
2013-01-01
A fast-paced tutorial that guides you through everything you need to know about dynamic UI design for Android devices.This book is for developers with a basic understanding of Android programming who would like to improve the appearance and usability of their applications. Whether you're looking to create a more interactive user experience, create more dynamically adaptive UIs, provide better support for tablets and smartphones in a single app, reduce the complexity of managing your app UIs, or you are just trying to expand your UI design philosophy, then this book is for you.
Creating a Website The Missing Manual
MacDonald, Matthew
2011-01-01
Think you need an army of skilled programmers to build a website? Think again. With nothing more than an ordinary PC, some raw ambition, and this book, you'll learn how to create and maintain a professional-looking, visitor-friendly site. This Missing Manual gives you all the tools, techniques, and expert advice you need. Plan your site. Create web pages by learning the basics of HTML and HTML5.Control page design with CSS. Format text, images, links, tables, and other elements.Attract visitors. Ensure that people can find your site through popular search engines.Build a community. Add forums
Can capital markets create incentives for pollution control?
International Nuclear Information System (INIS)
Lanoie, Paul; Roy, Maite; Laplante, Benoit
1998-01-01
It has been observed that upon trading-off the costs and benefits of pollution control, profit-maximizing firms may choose not to invest their resources in pollution abatement since the expected penalty imposed by regulators falls considerably short of the investment cost. Regulators have recently embarked on a deliberate strategy to release information to markets (investors and consumers) regarding firms' environmental performance in order to enhance incentives for pollution control. In this paper, we analyze the role that capital markets may play to create such incentives. Evidence drawn from American and Canadian studies indicates that capital markets react to the release of information, and that large polluters are affected more significantly by such release than smaller polluters. This result appears to be a function of the regulator's willingness to undertake strong enforcement actions as well as the possibility for capital markets to rank and compare firms with respect to their environmental performance
A facility for creating Python extensions in C++
International Nuclear Information System (INIS)
Dubois, P F
1998-01-01
Python extensions are usually created by writing the glue that connects Python to the desired new functionality in the C language. While simple extensions do not require much effort, to do the job correctly with full error checking is tedious and prone to errors in reference counting and to memory leaks, especially when errors occur. The resulting program is difficult to read and maintain. By designing suitable C++ classes to wrap the Python C API, we are able to produce extensions that are correct and which clean up after themselves correctly when errors occur. This facility also integrates the C++ and Python exception facilities. This paper briefly describes our package for this purpose, named CXX. The emphasis is on our design choices and the way these contribute to the construction of accurate Python extensions. We also briefly relate the way CXX's facilities for sequence classes allow use of C++'s Standard Template Library (STL) algorithms on C++ sequences
Shimazaki, Kei-ichi; Kushida, Tatsuya
2010-06-01
Lactoferrin is a multi-functional metal-binding glycoprotein that exhibits many biological functions of interest to many researchers from the fields of clinical medicine, dentistry, pharmacology, veterinary medicine, nutrition and milk science. To date, a number of academic reports concerning the biological activities of lactoferrin have been published and are easily accessible through public data repositories. However, as the literature is expanding daily, this presents challenges in understanding the larger picture of lactoferrin function and mechanisms. In order to overcome the "analysis paralysis" associated with lactoferrin information, we attempted to apply a text mining method to the accumulated lactoferrin literature. To this end, we used the information extraction system GENPAC (provided by Nalapro Technologies Inc., Tokyo). This information extraction system uses natural language processing and text mining technology. This system analyzes the sentences and titles from abstracts stored in the PubMed database, and can automatically extract binary relations that consist of interactions between genes/proteins, chemicals and diseases/functions. We expect that such information visualization analysis will be useful in determining novel relationships among a multitude of lactoferrin functions and mechanisms. We have demonstrated the utilization of this method to find pathways of lactoferrin participation in neovascularization, Helicobacter pylori attack on gastric mucosa, atopic dermatitis and lipid metabolism.
Weisbuch, Robert A.
2008-01-01
In this article, the author laments higher education's lack of concern towards the development of teaching in the public schools over the last half of the 20th century. Most of academe's work on the topic of teacher training has been done at the branches of state universities that needed to make money and create a niche. The author observes that…
Creating opioid dependence in the emergency department.
Upadhye, Suneel
2018-01-01
Clinical question What is the risk of creating opioid dependence from an ED opioid prescription? Article chosen Barnett ML, Olenski AR, Jena AB. Opioid-prescribing patterns of emergency physicians and risk of long-term use. N Engl J Med 2017;376:663-73, doi:10.1056/NEJMsa1610524. This study examined the risk of creating long-term opioid dependence from a prescription written in an opioid-naive patient in the ED.
nmsBuilder: Freeware to create subject-specific musculoskeletal models for OpenSim.
Valente, Giordano; Crimi, Gianluigi; Vanella, Nicola; Schileo, Enrico; Taddei, Fulvia
2017-12-01
Musculoskeletal modeling and simulations of movement have been increasingly used in orthopedic and neurological scenarios, with increased attention to subject-specific applications. In general, musculoskeletal modeling applications have been facilitated by the development of dedicated software tools; however, subject-specific studies have been limited also by time-consuming modeling workflows and high skilled expertise required. In addition, no reference tools exist to standardize the process of musculoskeletal model creation and make it more efficient. Here we present a freely available software application, nmsBuilder 2.0, to create musculoskeletal models in the file format of OpenSim, a widely-used open-source platform for musculoskeletal modeling and simulation. nmsBuilder 2.0 is the result of a major refactoring of a previous implementation that moved a first step toward an efficient workflow for subject-specific model creation. nmsBuilder includes a graphical user interface that provides access to all functionalities, based on a framework for computer-aided medicine written in C++. The operations implemented can be used in a workflow to create OpenSim musculoskeletal models from 3D surfaces. A first step includes data processing to create supporting objects necessary to create models, e.g. surfaces, anatomical landmarks, reference systems; and a second step includes the creation of OpenSim objects, e.g. bodies, joints, muscles, and the corresponding model. We present a case study using nmsBuilder 2.0: the creation of an MRI-based musculoskeletal model of the lower limb. The model included four rigid bodies, five degrees of freedom and 43 musculotendon actuators, and was created from 3D surfaces of the segmented images of a healthy subject through the modeling workflow implemented in the software application. We have presented nmsBuilder 2.0 for the creation of musculoskeletal OpenSim models from image-based data, and made it freely available via nmsbuilder
Net-Zero Building Technologies Create Substantial Energy Savings -
only an estimated 1% of commercial buildings are built to net-zero energy criteria. One reason for this Continuum Magazine | NREL Net-Zero Building Technologies Create Substantial Energy Savings Net -Zero Building Technologies Create Substantial Energy Savings Researchers work to package and share step
Creating science simulations through Computational Thinking Patterns
Basawapatna, Ashok Ram
Computational thinking aims to outline fundamental skills from computer science that everyone should learn. As currently defined, with help from the National Science Foundation (NSF), these skills include problem formulation, logically organizing data, automating solutions through algorithmic thinking, and representing data through abstraction. One aim of the NSF is to integrate these and other computational thinking concepts into the classroom. End-user programming tools offer a unique opportunity to accomplish this goal. An end-user programming tool that allows students with little or no prior experience the ability to create simulations based on phenomena they see in-class could be a first step towards meeting most, if not all, of the above computational thinking goals. This thesis describes the creation, implementation and initial testing of a programming tool, called the Simulation Creation Toolkit, with which users apply high-level agent interactions called Computational Thinking Patterns (CTPs) to create simulations. Employing Computational Thinking Patterns obviates lower behavior-level programming and allows users to directly create agent interactions in a simulation by making an analogy with real world phenomena they are trying to represent. Data collected from 21 sixth grade students with no prior programming experience and 45 seventh grade students with minimal programming experience indicates that this is an effective first step towards enabling students to create simulations in the classroom environment. Furthermore, an analogical reasoning study that looked at how users might apply patterns to create simulations from high- level descriptions with little guidance shows promising results. These initial results indicate that the high level strategy employed by the Simulation Creation Toolkit is a promising strategy towards incorporating Computational Thinking concepts in the classroom environment.
DES Science Portal: II- Creating Science-Ready Catalogs
Energy Technology Data Exchange (ETDEWEB)
Fausti Neto, Angelo; et al.
2017-08-18
We present a novel approach for creating science-ready catalogs through a software infrastructure developed for the Dark Energy Survey (DES). We integrate the data products released by the DES Data Management and additional products created by the DES collaboration in an environment known as DES Science Portal. Each step involved in the creation of a science-ready catalog is recorded in a relational database and can be recovered at any time. We describe how the DES Science Portal automates the creation and characterization of lightweight catalogs for DES Year 1 Annual Release, and show its flexibility in creating multiple catalogs with different inputs and configurations. Finally, we discuss the advantages of this infrastructure for large surveys such as DES and the Large Synoptic Survey Telescope. The capability of creating science-ready catalogs efficiently and with full control of the inputs and configurations used is an important asset for supporting science analysis using data from large astronomical surveys.
2003-01-01
" Yes, we create our own reality. This is one of the most fundamental tenets of the ancient oriental religions, such as Buddhism. And during the last century, modern particle physics or quantum mechanics has discovered exactly the same thing" (1 page).
Creating Interdisciplinarity within Monodisciplinary Structures
DEFF Research Database (Denmark)
Lindvig, Katrine
discrepancies in the use of the term interdisciplinarity, which have repercussions for the practices and incentives of creating interdisciplinary education, research and collaboration. Overall, the thesis shows that interdisciplinary teaching and learning practices have to engage in a continuous balancing...
Directory of Open Access Journals (Sweden)
Krstić Bojan
2011-01-01
Full Text Available Performance measurement in modern conditions is one of the most important business requirements since enterprises face the need to exhibit returns for stockholders and investors, but also contribution of management to those returns, as well as contribution of certain business units, functional departments and activities within them. Hence, it is particularly important to assess marketing successfulness as a business function according to return on investment in marketing activities, but also according to the set of indicators from following performance groups - marketing effectiveness and marketing efficiency. Core issue is which measures to select and use in the marketing performance measurement system of certain enterprise so that it could be able to assess how effective and efficient its marketing is. In other words, adequate performance measurement system ought to contain performance measures that will be used to monitor effects and marketing strategy implementation process (controlling while implementing, and performance measures that can be applied to overall effect monitoring after the strategy implementation period. Otherwise, creating the marketing performance measurement system is a complex task for marketing managers. Therefore, the aim of this paper is to explore key principles and develop conceptual framework for creating and selecting performance measurement system for marketing strategy control which is based on characteristics and key success factors of marketing strategy, that is activities and actions for its operationalizing and effective implementing.
Pratas, Antonio
2014-01-01
This book contains practical, step-by-step tutorials along with plenty of explanation about designing your flat website. Each section is introduced sequentially, building up your web design skills and completing your website.Creating Flat Design Websites is ideal for you if you are starting on your web development journey, but this book will also benefit seasoned developers wanting to start developing in flat.
Creating library tutorials for nursing students.
Schroeder, Heidi
2010-04-01
This article describes one librarian's experiences with creating, promoting, and assessing online library tutorials. Tutorials were designed to provide on-demand and accessible library instruction to nursing students at Michigan State University. Topics for tutorials were chosen based on the librarian's liaison experiences and suggestions from nursing faculty. The tutorials were created using Camtasia and required the application of several tools and techniques. Tutorials were promoted through Web pages, the ANGEL course management system, blog posts, librarian interactions, e-mails, and more. In order to assess the tutorials' perceived effectiveness, feedback was gathered using a short survey. Future plans for the nursing tutorials project are also discussed.
5 CFR 9701.372 - Creating initial pay ranges.
2010-01-01
... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Creating initial pay ranges. 9701.372... HUMAN RESOURCES MANAGEMENT SYSTEM Pay and Pay Administration Transitional Provisions § 9701.372 Creating initial pay ranges. (a) DHS must, after coordination with OPM, set the initial band rate ranges for the...
Talent Management for Creating a Performance Work Environment ...
African Journals Online (AJOL)
This article examines the extent to which talent management can contribute towards creating a performance work environment (PWE) that can enhance sustainable talent identifi cation and development in the public service. The literature analysis results reveal that talent management is essential in creating a PWE in the ...
Borzdov, G. N.
2017-10-01
The family of solutions to the Dirac equation for an electron moving in an electromagnetic lattice with the chiral structure created by counterpropagating circularly polarized plane electromagnetic waves is obtained. At any nonzero quasimomentum, the dispersion equation has two solutions which specify bispinor wave functions describing electron states with different energies and mean values of momentum and spin operators. The inversion of the quasimomentum results in two other linearly independent solutions. These four basic wave functions are uniquely defined by eight complex scalar functions (structural functions), which serve as convenient building blocks of the relations describing the electron properties. These properties are illustrated in graphical form over a wide range of quasimomenta. The superpositions of two basic wave functions describing different spin states and corresponding to (i) the same quasimomentum (unidirectional electron states with the spin precession) and (ii) the two equal-in-magnitude but oppositely directed quasimomenta (bidirectional electron states) are also treated.
Collis, D J; Montgomery, C A
1998-01-01
What differentiates truly great corporate strategies from the merely adequate? How can executives at the corporate level create tangible advantage for their businesses that makes the whole more than the sum of the parts? This article presents a comprehensive framework for value creation in the multibusiness company. It addresses the most fundamental questions of corporate strategy: What businesses should a company be in? How should it coordinate activities across businesses? What role should the corporate office play? How should the corporation measure and control performance? Through detailed case studies of Tyco International, Sharp, the Newell Company, and Saatchi and Saatchi, the authors demonstrate that the answers to all those questions are driven largely by the nature of a company's special resources--its assets, skills, and capabilities. These range along a continuum from the highly specialized at one end to the very general at the other. A corporation's location on the continuum constrains the set of businesses it should compete in and limits its choices about the design of its organization. Applying the framework, the authors point out the common mistakes that result from misaligned corporate strategies. Companies mistakenly enter businesses based on similarities in products rather than the resources that contribute to competitive advantage in each business. Instead of tailoring organizational structures and systems to the needs of a particular strategy, they create plain-vanilla corporate offices and infrastructures. The company examples demonstrate that one size does not fit all. One can find great corporate strategies all along the continuum.
Difficult Sudoku Puzzles Created by Replica Exchange Monte Carlo Method
Watanabe, Hiroshi
2013-01-01
An algorithm to create difficult Sudoku puzzles is proposed. An Ising spin-glass like Hamiltonian describing difficulty of puzzles is defined, and difficult puzzles are created by minimizing the energy of the Hamiltonian. We adopt the replica exchange Monte Carlo method with simultaneous temperature adjustments to search lower energy states efficiently, and we succeed in creating a puzzle which is the world hardest ever created in our definition, to our best knowledge. (Added on Mar. 11, the ...
International Nuclear Information System (INIS)
Kaliambos, L.A.
2008-01-01
Fundamental interactions of spinning electrons at an interelectron separation less than 578.8 fm yield attractive electromagnetic forces with S = 0 creating vibrations under a motional emf. They explain the indistinguishability of electrons and give a vibration energy able for calculating the ground-state energies of many-electron atoms without using any perturbative approximation. Such forces create two-electron orbitals able to account for the exclusion principal and the mechanism of covalent bonds. In the outer subshells of atoms the penetrating orbitals interact also as pair-pair systems and deform drastically the probability densities of the quantum mechanical electron clouds. Such a dynamics of deformation removes the degeneracy and leads to the deviation from the shell scheme. However in the interior of atoms the large nuclear charge leads to a spherically symmetric potential with non-interacting pairs for creating shells of degenerate states giving an accurate explanation of the X-ray lines. On the other hand, considerable charge distributions in nucleons as multiples of 2e/3 and - e/3 determined by the magnetic moments, interact for creating the nuclear structure with p-n bonds. Such spin-spin interactions show that the dominant concept of the untisymmetric wave function for fermions is inapplicable not only in the simple p-n, p-p, and n-n systems but also in the LS coupling of atoms in which the electrons interact from different quantum states giving either S = 0 or S = l. (author)
Creating a Podcast/Vodcast: A How-To Approach
Petersen, C. C.
2011-09-01
Creating podcasts and vodcasts is a wonderful way to share news of science research. Public affairs officers use them to reveal the latest discoveries done by scientists in their institutions. Educators can offer podcast/vodcast creation for students who want a unique way to demonstrate their mastery of science topics. Anyone with a computer and a USB microphone can create a podcast. To do a vodcast, you also need a digital video camera and video editing software. This session focused mainly on creating a podcast - writing the script and recording the soundtrack. Attendees also did a short activity to learn to write effective narrative copy for a podcast/vodcast.
CytoscapeRPC: a plugin to create, modify and query Cytoscape networks from scripting languages.
Bot, Jan J; Reinders, Marcel J T
2011-09-01
CytoscapeRPC is a plugin for Cytoscape which allows users to create, query and modify Cytoscape networks from any programming language which supports XML-RPC. This enables them to access Cytoscape functionality and visualize their data interactively without leaving the programming environment with which they are familiar. Install through the Cytoscape plugin manager or visit the web page: http://wiki.nbic.nl/index.php/CytoscapeRPC for the user tutorial and download. j.j.bot@tudelft.nl; j.j.bot@tudelft.nl.
ISO 55000: Creating an asset management system.
Bradley, Chris; Main, Kevin
2015-02-01
In the October 2014 issue of HEJ, Keith Hamer, group vice-president, Asset Management & Engineering at Sodexo, and marketing director at Asset Wisdom, Kevin Main, argued that the new ISO 55000 standards present facilities managers with an opportunity to create 'a joined-up, whole lifecycle approach' to managing and delivering value from assets. In this article, Kevin Main and Chris Bradley, who runs various asset management projects, examine the process of creating an asset management system.
White light emission of carbon dots by creating different emissive traps
International Nuclear Information System (INIS)
Joseph, Julin; Anappara, Aji A.
2016-01-01
Here we report a facile and rapid synthetic strategy for white light emitting carbon dots (CDs) by creating inhomogeneity in the surface-moieties by carbonizing ethylene diamine tetra acetic acid (EDTA) and ethylene glycol (EG) which are having different functional groups. The aqueous solution of the as-synthesised nanoparticles exhibits broad-band emission at several excitation wavelengths, with CIE parameters in the white gamut. Furthermore, white light emission is demonstrated through remote-phosphor technology, by capping 365 nm UV chip with PMMA, after dispersing the polymer with CDs. The resulting emission from the white-LED reported colour parameters such as CIE (0.34, 0.38), CRI of 84 and CCT of 5078 K.
White light emission of carbon dots by creating different emissive traps
Energy Technology Data Exchange (ETDEWEB)
Joseph, Julin; Anappara, Aji A., E-mail: aji@nitc.ac.in
2016-10-15
Here we report a facile and rapid synthetic strategy for white light emitting carbon dots (CDs) by creating inhomogeneity in the surface-moieties by carbonizing ethylene diamine tetra acetic acid (EDTA) and ethylene glycol (EG) which are having different functional groups. The aqueous solution of the as-synthesised nanoparticles exhibits broad-band emission at several excitation wavelengths, with CIE parameters in the white gamut. Furthermore, white light emission is demonstrated through remote-phosphor technology, by capping 365 nm UV chip with PMMA, after dispersing the polymer with CDs. The resulting emission from the white-LED reported colour parameters such as CIE (0.34, 0.38), CRI of 84 and CCT of 5078 K.
Alhijjaj, Muqdad; Bouman, Jacob; Wellner, Nikolaus; Belton, Peter; Qi, Sheng
2015-01-01
Creating in situ phase separation in solid dispersion based formulations to allow enhanced functionality of the dosage form, such as improving dissolution of poorly soluble model drug as well as being mucoadhesive, can significantly maximize the in vitro and in vivo performance of the dosage
Functional Heterogeneity and Senior Management Team Effectiveness
Benoliel, Pascale; Somech, Anit
2016-01-01
Purpose: There has been an increasing trend toward the creation of senior management teams (SMTs) which are characterized by a high degree of functional heterogeneity. Although such teams may create better linkages to information, along with the benefits of functional heterogeneity comes the potential for conflicts that stem from the value…
Plasma wave amplitude measurement created by guided laser wakefield
International Nuclear Information System (INIS)
Wojda, Franck
2010-01-01
The interaction of an intense laser pulse of short duration with a plasma produces a plasma wave with large amplitude in its wake, which is associated with a longitudinal electric field. It can be used to accelerate relativistic electrons injected into the wave to energies in the GeV range over distances of the order of a few centimeters, short compared to acceleration lengths in conventional accelerators. The control of the electron beam characteristics during the acceleration process is fundamental for achieving a usable laser-plasma acceleration stage. The main result of this thesis is the creation and characterization of a plasma wave in a weakly nonlinear regime over a length of several centimeters. Capillary tubes are used to guide the laser beam over these distances, while maintaining a large enough intensity (∼ 10 17 W/cm 2 ). The guided laser beam ionizes the gas in the tube and creates the plasma wave. A diagnostic based on the modification of the laser pulse spectrum was used to determine the amplitude of the plasma wave along the tube. The amplitude of the plasma wave was studied as a function of gas filling pressure, length of the capillary and laser energy. Experimental results are compared; they are in excellent agreement with analytical results and modeling. They show that the electric field associated with the plasma wave is between 1 and 10 GV/m over a length of up to 8 cm. This work has demonstrated the ability to create a controlled plasma wave in a weakly nonlinear regime. (author)
Mutation of serine 1333 in the ATR HEAT repeats creates a hyperactive kinase.
Directory of Open Access Journals (Sweden)
Jessica W Luzwick
Full Text Available Subcellular localization, protein interactions, and post-translational modifications regulate the DNA damage response kinases ATR, ATM, and DNA-PK. During an analysis of putative ATR phosphorylation sites, we found that a single mutation at S1333 creates a hyperactive kinase. In vitro and in cells, mutation of S1333 to alanine (S1333A-ATR causes elevated levels of kinase activity with and without the addition of the protein activator TOPBP1. S1333 mutations to glycine, arginine, or lysine also create a hyperactive kinase, while mutation to aspartic acid decreases ATR activity. S1333A-ATR maintains the G2 checkpoint and promotes completion of DNA replication after transient exposure to replication stress but the less active kinase, S1333D-ATR, has modest defects in both of these functions. While we find no evidence that S1333 is phosphorylated in cultured cells, our data indicate that small changes in the HEAT repeats can have large effects on kinase activity. These mutants may serve as useful tools for future studies of the ATR pathway.
Resolution 26/97 Creating of the Protection and Hygiene Radiation Center Presupuested Unit
International Nuclear Information System (INIS)
1997-01-01
The Center of Protection and Hygiene of the Radiations (CPHR) had been created in 1995 (Resolution 128) as Unit of Investigation Development (UID), belonging to the Nuclear Executive Secretary of Matters (SEAN). The objective of the present resolution is to create it now as Unit Bud gotten Center, science unit and integral technique of the Agency of Nuclear Energy (AEN), belonging to the Ministry of Science Technology and environment (CITMA) that has as generic objective to develop in the country the scientific-technical base of to the protection and the radiological security, guaranteeing with it that the applications pacify of the nuclear techniques is developed in harmony with the politics of protection of the health of the workers, the population in general and the environment, in agreement with the technical scientific advances and the international recommendations of this sphere. It also includes the specific objectives of the CPHR, their functions, the services scientific-technicians that it can toast, the entrance date into effect of the law (1 January 1997) and the final dispositions
Cognitive abilities and creating metaphorical names
Directory of Open Access Journals (Sweden)
Avanesyan, Marina O.
2016-06-01
Full Text Available The cognitive processing of metaphor creation has been insufficiently investigated. Creating metaphors requires the ability to work in a fantastic, impossible context, using symbolic and associative means to express oneís thoughts. It has been shown recently that intelligence plays an important role in the creation of metaphors, but it is not the main factor in determining their success. The present research explores the roles of conceptual abilities, categorical abilities, and flexibility (as the factor creativity in metaphor creation. Participants (n = 38 young adults were asked to come up with names for three photos, without any special instruction to create metaphors. To classify conceptual abilities we used ìConceptual Synthesisî (M. A. Kholodnaya, 2012; to measure categorical ability we used the subtest ìSimilaritiesî (D. Wechsler, 1955; to identify the role of creativity in the metaphor process we used the test of ìUnusual Usesî (J. P. Guilford, 1960. The creation of complex metaphorical names was associated with a tendency to create highly organized mental structures and to retain them within the general semantic context (r = 0.344, p < 0.05. The tendency to create single-level situational connections was associated with a tendency to give specific names to photos (r = 0.475, p < 0.01. Photographic images proved out to be fruitful stimuli to investigate the processing of visual information. We developed a preliminary classification of names: 1 concrete; 2 situational; 3 abstract; 4 metaphorical (M1 and M2. We identified two types of metaphorical names — perceptual and complex metaphors — that relate to conceptual abilities in different ways. It is inaccurate to speak about a general concept of ìmetaphorical abilitiesî; we should differentiate the psychological mechanisms that lie at their base.
International Nuclear Information System (INIS)
Speer, Stefan; Weiss, Alexander; Bert, Christoph; Klein, Andreas; Kober, Lukas; Yohannes, Indra
2017-01-01
Intensity-modulated radiotherapy (IMRT) techniques are now standard practice. IMRT or volumetric-modulated arc therapy (VMAT) allow treatment of the tumor while simultaneously sparing organs at risk. Nevertheless, treatment plan quality still depends on the physicist's individual skills, experiences, and personal preferences. It would therefore be advantageous to automate the planning process. This possibility is offered by the Pinnacle"3 treatment planning system (Philips Healthcare, Hamburg, Germany) via its scripting language or Auto-Planning (AP) module. AP module results were compared to in-house scripts and manually optimized treatment plans for standard head and neck cancer plans. Multiple treatment parameters were scored to judge plan quality (100 points = optimum plan). Patients were initially planned manually by different physicists and re-planned using scripts or AP. Script-based head and neck plans achieved a mean of 67.0 points and were, on average, superior to manually created (59.1 points) and AP plans (62.3 points). Moreover, they are characterized by reproducibility and lower standard deviation of treatment parameters. Even less experienced staff are able to create at least a good starting point for further optimization in a short time. However, for particular plans, experienced planners perform even better than scripts or AP. Experienced-user input is needed when setting up scripts or AP templates for the first time. Moreover, some minor drawbacks exist, such as the increase of monitor units (+35.5% for scripted plans). On average, automatically created plans are superior to manually created treatment plans. For particular plans, experienced physicists were able to perform better than scripts or AP; thus, the benefit is greatest when time is short or staff inexperienced. (orig.) [de
Speer, Stefan; Klein, Andreas; Kober, Lukas; Weiss, Alexander; Yohannes, Indra; Bert, Christoph
2017-08-01
Intensity-modulated radiotherapy (IMRT) techniques are now standard practice. IMRT or volumetric-modulated arc therapy (VMAT) allow treatment of the tumor while simultaneously sparing organs at risk. Nevertheless, treatment plan quality still depends on the physicist's individual skills, experiences, and personal preferences. It would therefore be advantageous to automate the planning process. This possibility is offered by the Pinnacle 3 treatment planning system (Philips Healthcare, Hamburg, Germany) via its scripting language or Auto-Planning (AP) module. AP module results were compared to in-house scripts and manually optimized treatment plans for standard head and neck cancer plans. Multiple treatment parameters were scored to judge plan quality (100 points = optimum plan). Patients were initially planned manually by different physicists and re-planned using scripts or AP. Script-based head and neck plans achieved a mean of 67.0 points and were, on average, superior to manually created (59.1 points) and AP plans (62.3 points). Moreover, they are characterized by reproducibility and lower standard deviation of treatment parameters. Even less experienced staff are able to create at least a good starting point for further optimization in a short time. However, for particular plans, experienced planners perform even better than scripts or AP. Experienced-user input is needed when setting up scripts or AP templates for the first time. Moreover, some minor drawbacks exist, such as the increase of monitor units (+35.5% for scripted plans). On average, automatically created plans are superior to manually created treatment plans. For particular plans, experienced physicists were able to perform better than scripts or AP; thus, the benefit is greatest when time is short or staff inexperienced.
Energy Technology Data Exchange (ETDEWEB)
Podar, Mircea [Univ. of Tennessee, Knoxville, TN (United States). Biosciences Division; Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hettich, Robert [Univ. of Tennessee, Knoxville, TN (United States). Biosciences Division; Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Copie, Valerie [Montana State Univ., Bozeman, MT (United States). Dept. of Chemistry and Biochemistry; Bothner, Brian [Montana State Univ., Bozeman, MT (United States). Dept. of Chemistry and Biochemistry
2016-12-16
The main objective of this project was to use symbiotic Nanoarchaeaota, a group of thermophilic Archaea that are obligate symbionts/parasites on other Archaea, to develop an integrated multi-omic approach to study inter-species interactions as well as to understand fundamental mechanism that enable such relationships. As part of this grant we have achieved a number of important milestone on both technical and scientific levels. On the technical side, we developed immunofluorescence labeling and tracking methods to follow Nanoarchaeota in cultures and in environmental samples, we applied such methods in conjunction with flow cytometry to quantify and isolate uncultured representatives from the environment and characterized them by single cell genomics. On the proteomics side, we developed a more efficient and sensitive method to recover and semi-quantitatively measure membrane proteins, while achieving high total cellular proteome coverage (70-80% of the predicted proteome). Metabolomic analyses used complementary NMR and LC/GC mass spectrometry and led to the identification of novel lipids in these organisms as well as quantification of some of the major metabolites. Importantly, using several informatics approaches we were also able to integrate the transcriptomic, proteomic and metabolomic datasets, revealing aspects of the interspecies interaction that were not evident in the single omic analyses (manuscript in review). On the science side we determined that N. equitans and I. hospitalis are metabolically coupled and that N. equitans is strictly dependent on its host both for metabolic precursors and energetic needs. The actual mechanism by which small molecules move across the cell membrane remains unknown. The Ignicoccus host responds to the metabolic and energetic burned by upregulating of key primary metabolism steps and ATP synthesis. The two species have co-evolved, aspect that we determined by comparative genomics with other species of Ignicoccus
Creating interdisciplinary education within monodisciplinary structures
DEFF Research Database (Denmark)
Lindvig, Katrine; Lyall, Catherine; R. Meagher, Laura
2017-01-01
The literature on interdisciplinary higher education is influenced by two overall trends: one looks at the institutional level of specially designed interdisciplinary institutions, while the other assesses individual interdisciplinary educational activities. Much less attention is given...... to the processes of creating interdisciplinary education initiatives within traditional monodisciplinary universities. In this study, we thus explore how interdisciplinary education and teaching emerge and develop within universities that have little or no established infrastructure to support interdisciplinarity....... Using qualitative data from a multi-part case study, we examine the development of diverse interdisciplinary educational efforts within a traditional faculty-structured university in order to map the ways in which interdisciplinary educational elements have been created, supported, challenged or even...
Creating Space for Children's Literature
Serafini, Frank
2011-01-01
As teachers struggle to balance the needs of their students with the requirements of commercial reading materials, educators need to consider how teachers will create space for children's literature in today's classrooms. In this article, 10 practical recommendations for incorporating children's literature in the reading instructional framework…
Creating Cross-disciplinary Courses.
Reynolds, Elaine R
2012-01-01
Because of its focus on the biological underpinnings of action and behavior, neuroscience intersects with many fields of human endeavor. Some of these cross-disciplinary intersections have been long standing, while others, such as neurotheology or neuroeconomics, are more recently formed fields. Many undergraduate institutions have sought to include cross-disciplinary courses in their curriculum because this style of pedagogy is often seen as applicable to real world problems. However, it can be difficult for faculty with specialized training within their discipline to expand beyond their own fields to offer cross-disciplinary courses. I have been creating a series of multi- or cross-disciplinary courses and have found some strategies that have helped me successfully teach these classes. I will discuss general strategies and tools in developing these types of courses including: 1) creating mixed experience classrooms of students and contributing faculty 2) finding the right tools that will allow you to teach to a mixed population without prerequisites 3) examining the topic using multiple disciplinary perspectives 4) feeding off student experience and interest 5) assessing the impact of these courses on student outcomes and your neuroscience program. This last tool in particular is important in establishing the validity of this type of teaching for neuroscience students and the general student population.
Creating nanoscale emulsions using condensation.
Guha, Ingrid F; Anand, Sushant; Varanasi, Kripa K
2017-11-08
Nanoscale emulsions are essential components in numerous products, ranging from processed foods to novel drug delivery systems. Existing emulsification methods rely either on the breakup of larger droplets or solvent exchange/inversion. Here we report a simple, scalable method of creating nanoscale water-in-oil emulsions by condensing water vapor onto a subcooled oil-surfactant solution. Our technique enables a bottom-up approach to forming small-scale emulsions. Nanoscale water droplets nucleate at the oil/air interface and spontaneously disperse within the oil, due to the spreading dynamics of oil on water. Oil-soluble surfactants stabilize the resulting emulsions. We find that the oil-surfactant concentration controls the spreading behavior of oil on water, as well as the peak size, polydispersity, and stability of the resulting emulsions. Using condensation, we form emulsions with peak radii around 100 nm and polydispersities around 10%. This emulsion formation technique may open different routes to creating emulsions, colloidal systems, and emulsion-based materials.
Creating Futures through Participation and open-ended experiments
DEFF Research Database (Denmark)
Husted, Mia; Bladt, Mette; Tofteng, Ditte Maria Børglum
This workshop will engage participants in a process that enables ‘ordinary people’ to take responsibility for creating new futures and to bring about new anticipations for democratic developments of local and societal issues. Founded in the Critical Utopian Action Research Tradition, the workshop...... will engage participants in a brief version of a Future Creating Workshop....
Journalism and Media Future - Creating Identity and Reality
Directory of Open Access Journals (Sweden)
Slađana Stamenković
2015-05-01
boundaries. Classic media are still in the process of seeking effective business model and profit model that will replace the models that no longer work. In the next few years, creating content as the area will be the backbone of the formation of the Company's budget for the three dependent areas - media, marketing and PR. Ignoring the changes in media and journalism that the developed world is driven only means that some media will not survive, that some journalists will lose their jobs or become preparers content. Changes as a permanent modus vivendi in Serbia and the region are visible through a change in the way the media and the changing structure media content, which is the subject of the research conducted for this study. To predict the future of media and journalism are needed facts in the absence of which it is possible to rely on the thinking and experience of developed media community. One thing is certain: journalism and the media will not function the way it was before.
Intentionality, consciousness, and creating community.
Malinski, Violet M
2009-01-01
Intentionality is briefly explored from the perspective of seminal written works on therapeutic touch and recorded conversations with Martha E. Rogers. This overview hints at possible interrelationships among intentionality, consciousness, and creating community, along with conceptual ambiguities, which are explored in detail by Zahourek and Larkin in this column.
Creating a New Teaching Profession
Goldhaber, Dan, Ed.; Hannaway, Jane, Ed.
2009-01-01
Considering that having a quality teacher is the foremost in-school predictor of students' success, ensuring teacher excellence is vital to the nation's educational system. In "Creating a New Teaching Profession," diverse scholars assess the state of human capital development in the teaching profession today and how to progress.
Green Polymer Chemistry: Enzyme Catalysis for Polymer Functionalization
Directory of Open Access Journals (Sweden)
Sanghamitra Sen
2015-05-01
Full Text Available Enzyme catalyzed reactions are green alternative approaches to functionalize polymers compared to conventional methods. This technique is especially advantageous due to the high selectivity, high efficiency, milder reaction conditions, and recyclability of enzymes. Selected reactions can be conducted under solventless conditions without the application of metal catalysts. Hence this process is becoming more recognized in the arena of biomedical applications, as the toxicity created by solvents and metal catalyst residues can be completely avoided. In this review we will discuss fundamental aspects of chemical reactions biocatalyzed by Candida antarctica lipase B, and their application to create new functionalized polymers, including the regio- and chemoselectivity of the reactions.
Green polymer chemistry: enzyme catalysis for polymer functionalization.
Sen, Sanghamitra; Puskas, Judit E
2015-05-21
Enzyme catalyzed reactions are green alternative approaches to functionalize polymers compared to conventional methods. This technique is especially advantageous due to the high selectivity, high efficiency, milder reaction conditions, and recyclability of enzymes. Selected reactions can be conducted under solventless conditions without the application of metal catalysts. Hence this process is becoming more recognized in the arena of biomedical applications, as the toxicity created by solvents and metal catalyst residues can be completely avoided. In this review we will discuss fundamental aspects of chemical reactions biocatalyzed by Candida antarctica lipase B, and their application to create new functionalized polymers, including the regio- and chemoselectivity of the reactions.
Hiding objects and creating illusions above a carpet filter using a Fourier optics approach.
Wu, Kedi; Wang, Guo Ping
2010-09-13
Invisibility carpet cloaks are usually used to hide an object beneath carpet. In this paper we propose and demonstrate a carpet filter to hide objects and create illusions above the filter by using a Fourier optics method. Instead of using transformation optics, we get electromagnetic parameters of the filter by optical transfer functions, which play the role of modulating the propagation of the scattering angular spectrum directly from an object above the filter. By further adding a functional layer onto the filter, we can even camouflage the object so that it appears to be a different object. The analytical results are confirmed by numerical simulations. Our method is completely different from the current coordinate transfer method and may provide another point of view to more clearly understand the mechanism of invisibility cloaks.
Fish and wildlife evaluation of wetlands created by mining activities
International Nuclear Information System (INIS)
Kepler, S.R.; Sabolcik, T.M.
1994-01-01
Four lacustrine wetland systems in Pennsylvania created by mining activities, either by sand and gravel or bituminous coal removal, were samples to determine the functional values of the fish and wildlife habitat. Most of the sampled sites were remnants of pre-act (1977) mining where minimal, if any, reclamation techniques were used. Natural succession within these impoundments have created ecosystems different in quality based on the availability of suitable habitat. Sampling techniques used to evaluate the wetland systems included initial water quality analyses, and aquatic habitat mapping using visual observations, LCD recorder, and computerized chart recorder. Fish populations were sampled using a boat mounted D.C. electrofishing unit with game fish being collected, weighted and measured and population estimates calculated as catch per unit effort (CPUE). Wildlife utilization of each site was conducted during the spring nesting season. Each site was surveyed for species utilization, nest searches determined whether nesting occurred and nesting success was noted. Wildlife utilization was determined by observation, tracks, calls, scat, etc. Whenever possible sites were monitored during the fall migration period to determine whether the sites were being utilized by migratory waterfowl. Wetland vegetative studies were also conducted at each site. Wetland species were identified and concentrations and dispersion of each wetland species were noted. Each sampled wetland data set is presented separately because of the variabilities between sampled sites based on the geology, reclamation status, and habitat
Carbon storage potential by four macrophytes as affected by planting diversity in a created wetland.
Means, Mary M; Ahn, Changwoo; Korol, Alicia R; Williams, Lisa D
2016-01-01
Wetland creation has become a commonplace method for mitigating the loss of natural wetlands. Often mitigation projects fail to restore ecosystem services of the impacted natural wetlands. One of the key ecosystem services of newly created wetlands is carbon accumulation/sequestration, but little is known about how planting diversity (PD) affects the ability of herbaceous wetland plants to store carbon in newly created wetlands. Most mitigation projects involve a planting regime, but PD, which may be critical in establishing biologically diverse and ecologically functioning wetlands, is seldom required. Using a set of 34 mesocosms (∼1 m(2) each), we investigated the effects of planting diversity on carbon storage potential of four native wetland plant species that are commonly planted in created mitigation wetlands in Virginia - Carex vulpinoidea, Eleocharis obtusa, Juncus effusus, and Mimulus ringens. The plants were grown under the four distinctive PD treatments [i.e., monoculture (PD 1) through four different species mixture (PD 4)]. Plant biomass was harvested after two growing seasons and analyzed for tissue carbon content. Competition values (CV) were calculated to understand how the PD treatment affected the competitive ability of plants relative to their biomass production and thus carbon storage potentials. Aboveground biomass ranged from 988 g/m(2) - 1515 g/m(2), being greatest in monocultures, but only when compared to the most diverse mixture (p = 0.021). However, carbon storage potential estimates per mesocosm ranged between 344 g C/m(2) in the most diverse mesocosms (PD 4) to 610 g C/m(2) in monoculture ones with no significant difference (p = 0.089). CV of E. obtusa and C. vulpinoidea showed a declining trend when grown in the most diverse mixtures but J. effusus and M. ringens displayed no difference across the PD gradient (p = 0.910). In monocultures, both M. ringens, and J. effusus appeared to store carbon as biomass more
Creating safety by strengthening clinicians' capacity for reflexivity
2011-01-01
This commentary explores the nature of creating safety in the here-and-now. Creating safety encompasses two dimensions: revisiting specific behaviours by focusing on substandard performance (reflection), and a more broad-ranging attention to everyday behaviours that are taken as given (reflexivity). The piece pays particular attention to this second dimension of creating safety. Two techniques that promote reflexivity are discussed: video-filming real-time, everyday clinical practice and inviting clinicians' feedback about their own footage, and reflecting on the knowledge and questions that patients and families have about their care, and about unexpected outcomes and clinical incidents. The piece concludes that feedback about everyday practice using these methods is critical to enhancing the safety of everyday activity. PMID:21450780
Meris Bantilan-Smith; Gregory L. Bruland; Richard A. MacKenzie; Adonia R. Henry; Christina R. Ryder
2009-01-01
The loss of coastal wetlands throughout the Hawaiian Islands has increased the numbers of created (CW) and restored (RW) wetlands. An assessment of these wetlands has yet to occur, and it has not been determined whether CWs and RWs provide the same functions as natural wetlands (NWs). To address these concerns, vegetation and soil characteristics of 35 wetlands were...
Digital Media Creates Youth Voices Heard
Directory of Open Access Journals (Sweden)
Jeff Sallee
2014-06-01
Full Text Available Oklahoma 4-H clubs and military service centers partnered with the Adobe Youth Voices (AYV program to give youth opportunities to raise their voices through digital media. This program reached out to underrepresented youth and gave them the tools and technology to effectively express themselves. The intent of this project was for 4-H members to create videos to educate, help and raise awareness in their communities of topics that were important to the youth. These experiences help youth gain knowledge towards helping others solve farm, home, and community problems. Participating youth selected issues that were important to them and created a short video, educating others and sharing their convictions on the topics of horse therapy, citizenship, bullying, and distracted driving.
Professional Flash Mobile Development Creating Android and iPhone Applications
Wagner, Richard
2010-01-01
Professional Flash Mobile Development: Creating Android and iPhone ApplicationsEverything Flash developers need to know to create native Android and iPhone appsThis Wrox guide shows Flash developers how to create native applications for Android and iPhone mobile devices using Flash. Packed with practical examples, it shows how to build a variety of apps and integrate them with core mobile services such as Accelerometer, GPS, Photo Library,and more.Offers Flash developers the tools to create apps for the Android and iPhone mobile devicesSho
Computational network design from functional specifications
Peng, Chi Han; Yang, Yong Liang; Bao, Fan; Fink, Daniel; Yan, Dongming; Wonka, Peter; Mitra, Niloy J.
2016-01-01
of people in a workspace. Designing such networks from scratch is challenging as even local network changes can have large global effects. We investigate how to computationally create networks starting from only high-level functional specifications
High refractive index modification of SiO2 created by femtosecond laser nanostructuring
International Nuclear Information System (INIS)
Barillot, T; Grojo, D; Gertsvolf, M; Rayner, D M; Corkum, P B; Lei, S
2010-01-01
By comparing simulations with experiment, we show that the effective refractive index of fused SiO 2 can be locally reduced by (1.8 ± 0.2)% by femtosecond laser nanostructuring. We create a microlens of material containing a planar array of nanocracks embedded inside fused silica and probe how it refracts or absorbs light as a function of pulse energy. The self-generated microlens lowers the peak light intensity by deflecting the light around the focus. We obtain the refractive index by simulating the beam transport using the 3D wave equation in conjunction with the measured dimensions of the modified material.
Towards Creating Sustainable Ecotourism Interventions: Practical ...
African Journals Online (AJOL)
2017-05-01
May 1, 2017 ... Keywords: Tourism, Development, Livelihoods, Assets, Adaptive .... widely reported in the Ghanaian media that farmers in some ..... created an outlet for revenue which, when accrued, was invested prudently in social.
Schlosser, Danielle; Nahum, Mor
2016-01-01
Background Numerous psychosocial interventions for individuals with chronic psychotic disorders (CPD) have shown positive effects on social cognitive and functional outcome measures. However, access to and engagement with these interventions remains limited. This is partly because these interventions require specially trained therapists, are not available in all clinical settings, and have a high scheduling burden for participants, usually requiring a commitment of several weeks. Delivering interventions remotely via mobile devices may facilitate access, improve scheduling flexibility, and decrease participant burden, thus improving adherence to intervention requirements. To address these needs, we designed the Creating Live Interactions to Mitigate Barriers (CLIMB) digital intervention, which aims to enhance social functioning in people with CPD. CLIMB consists of two treatment components: a computerized social cognition training (SCT) program and optimized remote group therapy (ORGT). ORGT is an innovative treatment that combines remote group therapy with group texting (short message service, SMS). Objectives The objectives of this single-arm study were to investigate the feasibility of delivering 6 weeks of CLIMB to people with CPD and explore the initial effects on outcomes. Methods Participants were recruited, screened and enrolled via the Internet, and delivered assessments and interventions remotely using provided tablets (iPads). Participants were asked to complete 18 hours of SCT and to attend 6 remote group therapy sessions. To assess feasibility, adherence to study procedures, attrition rates, engagement metrics, and acceptability of the intervention were evaluated. Changes on measures of social cognition, quality of life, and symptoms were also explored. Results In total, 27 participants were enrolled over 12 months. Remote assessments were completed successfully on 96% (26/27) of the enrolled participants. Retention in the 6-week trial was 78% (21
Landrey, Ann
1996-01-01
Strategies for minimizing sun exposure of campers and staff include educating campers about the sun's effect on their skin, scheduling activities when the sun is less intense, creating shade at the camp site, incorporating sun protection into camp dress code, and training staff regarding sun protection. Addresses OSHA and liability issues. (LP)
Creating Intangible Value through a Corporate Employee Portal
David Mendes; Jorge Gomes; Mário Romao
2017-01-01
Organizations create competitive advantage by creating more economic value than their rivals. Increasing business competition and information technology development have both led to huge corporate organizational changes and have raised the importance of intangible assets along the value chain. Value creation and the success of organizations increasingly depends on the leverage of knowledge available internally, as nowadays it has become essential to understand employee portals’ business value...
Han, Xue; Hou, Jing; Xie, Jixun; Yin, Jian; Tong, Yi; Lu, Conghua; Möhwald, Helmuth
2016-06-29
Here we report a simple, novel, yet robust nonlithographic method for the controlled fabrication of two-dimensional (2-D) ordered arrays of polyethylene glycol (PEG) microspheres. It is based on the synergistic combination of two bottom-up processes enabling periodic structure formation for the first time: dewetting and the mechanical wrinkle formation. The deterministic dewetting results from the hydrophilic polymer PEG on an incompatible polystyrene (PS) film bound to a polydimethylsiloxane (PDMS) substrate, which is directed both by a wrinkled template and by the template-directed in-situ self-wrinkling PS/PDMS substrate. Two strategies have been introduced to achieve synergism to enhance the 2-D ordering, i.e., employing 2-D in-situ self-wrinkling substrates and boundary conditions. As a result, we achieve highly ordered 2-D arrays of PEG microspheres with desired self-organized microstructures, such as the array location (e.g., selectively on the crest/in the valley of the wrinkles), diameter, spacing of the microspheres, and array direction. Additionally, the coordination of PEG with HAuCl4 is utilized to fabricate 2-D ordered arrays of functional PEG-HAuCl4 composite microspheres, which are further converted into different Au nanoparticle arrays. This simple versatile combined strategy could be extended to fabricate highly ordered 2-D arrays of other functional materials and achieve desirable properties and functionalities.
García-Calvo, Tomás; Leo, Francisco Miguel; Gonzalez-Ponce, Inmaculada; Sánchez-Miguel, Pedro Antonio; Mouratidis, Athanasios; Ntoumanis, Nikos
2014-01-01
In this longitudinal study, we examined the extent to which perceived coach- and peer-created motivational climates are associated with athlete-group cohesion and satisfaction with participation among Spanish soccer players competing in the Third National Division. Multilevel modelling analyses showed that perceived coach-created task climate was positively related to perceived cohesion and players' satisfaction with their participation within their team. Also, perceived peer-created task climate related positively to perceived cohesion. The results indicate the importance of considering peer-related aspects of the motivational climate in addition to considering the coach-related aspects of the motivational climate when examining motivational group dynamics in sport.
Creating an Innovative Learning Organization
Salisbury, Mark
2010-01-01
This article describes how to create an innovative learning (iLearning) organization. It begins by discussing the life cycle of knowledge in an organization, followed by a description of the theoretical foundation for iLearning. Next, the article presents an example of iLearning, followed by a description of the distributed nature of work, the…
Creating Healthy Environments For Youth Athletes
EPA has created a presentation and companion checklist to help coaches and athletic administrators better understand the environmental health risks associated with youth sports and the steps they can follow to protect young athletes.
Creating your own leadership brand.
Kerfoot, Karlene
2002-01-01
Building equity in a brand happens through many encounters. The initial attraction must be followed by the meeting of expectations. This creates a loyalty that is part of an emotional connection to that brand. This is the same process people go through when they first meet a leader and decide if this is a person they want to buy into. People will examine your style, your competence, and your standards. If you fail on any of these fronts, your ability to lead will be severely compromised. People expect more of leaders now, because they know and recognize good leaders. And, predictably, people are now more cynical of leaders because of the well-publicized excess of a few leaders who advanced their own causes at the expense of their people and their financial future. This will turn out to be a good thing, because it will create a higher standard of leadership that all must aspire to achieve. When the bar is raised for us, our standards of performance are also raised.
Resonant fields created by spiral electric currents in Tokamaks
International Nuclear Information System (INIS)
Fernandes, A.S.; Caldas, I.L.
1985-01-01
The influence of the resonant magnetic perturbations, created by electric currents in spirals, on the plasma confinement in a tokamak with circular section and large aspect ratio is investigated. These perturbations create magnetic islands around the rational magnetic surface which has the helicity of the helicoidal currents. The intensities of these currents are calculated in order to the magnetic islands reach the limiter or others rational surfaces, what could provoke the plasma disrupture. The electric current intensities are estimated, in two spiral sets with different helicities, which create a predominantly stocastic region among the rational magnetic surfaces with these helicities. (L.C.) [pt
Creating Practitioners of Design for Quality through Education
DEFF Research Database (Denmark)
Robotham, Antony John
1998-01-01
The above paper described my experiences of teaching engineering students to be able to create products of the highest design quality. The paper identifies the need to have a good understanding of the needs of the customer and to be able to create products, which have a range of quality attributes...... would be of higher quality and provide greater customer satisfaction if designers were continually aware of all life-phase needs....
Creating a web site the missing manual
MacDonald, Matthew
2008-01-01
Think you have to be a technical wizard to build a great web site? Think again. If you want to create an engaging web site, this thoroughly revised, completely updated edition of Creating a Web Site: The Missing Manual demystifies the process and provides tools, techniques, and expert guidance for developing a professional and reliable web presence. Whether you want to build a personal web site, an e-commerce site, a blog, or a web site for a specific occasion or promotion, this book gives you detailed instructions and clear-headed advice for: Everything from planning to launching. From pi
Ambulatory EHR functionality: a comparison of functionality lists.
Drury, Barbara M
2006-01-01
There is a proliferation of lists intended to define and clarify the functionality of an ambulatory electronic health record system. These lists come from both private and public entities and vary in terminology, granularity, usability, and comprehensiveness. For example, functionality regarding a problem list includes the following possible definitions: * "Create and maintain patient-specific problem lists," from the HL7 Electronic Health Record Draft Standard for Trial Use. * "Provide a flexible mechanism for retrieval of encounter information that can be organized by diagnosis, problem, problem type," from the Bureau of Primary Health Care. * "The system shall associate encounters, orders, medications and notes with one or more problems," from the Certification Commission on Health Information Technology. * "Displays dates of problems on problem list," from COPIC Insurance Co. * "Shall automatically close acute problems using an automated algorithm," from the Physicians Foundations HIT Subcommittee. This article will compare the attributes of these five electronic health record functionality lists and their usefulness to different audiences-clinicians, application developers and payers.
Stefanov, Ivan
2012-01-01
Working with today‟s permanent changes in external and global environment, the companies and their managers are facing with permanent challenge to adopt better on the new conditions which are created by globalization and internationalization overall in the business world. Regarding that, the companies are trying to hold their position to fasten a bit some competitive advantage which will be impulse to attach their goal for holding and strengthening their positions on domestic and internationa...
Fundamental Characteristics of Incentive Streams Created by Legal Systems
Dari Mattiacci, G.
2002-01-01
The law shapes peoples behaviour by creating incentives. For example, tort law induces motorists to drive carefully by making them pay compensation for the accidents they may cause. This study analyses the way the law can create incentives in those cases in which the courts or the administrative
Creating an Asthma-Friendly School
Centers for Disease Control (CDC) Podcasts
2007-11-08
This podcast features real-life success stories of students with asthma who, thanks to their schools' implementation of asthma-friendly policies and programs, now have their asthma under control. Created: 11/8/2007 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP), Division of Adolescent and School Health (DASH). Date Released: 5/20/2008.
Online interactive tutorials for creating graphs with excel 2007 or 2010.
Vanselow, Nicholas R; Bourret, Jason C
2012-01-01
Graphic display of clinical data is a useful tool for the behavior-analytic clinician. However, graphs can sometimes be difficult to create. We describe how to access and use an online interactive tutorial that teaches the user to create a variety of graphs often used by behavior analysts. Three tutorials are provided that cover the basics of Microsoft Excel 2007 or 2010, creating graphs for clinical purposes, and creating graphs for research purposes. The uses for this interactive tutorial and other similar programs are discussed.
Creating Transgenic shRNA Mice by Recombinase-Mediated Cassette Exchange
Premsrirut, Prem K.; Dow, Lukas E.; Park, Youngkyu; Hannon, Gregory J.; Lowe, Scott W.
2014-01-01
RNA interference (RNAi) enables sequence-specific, experimentally induced silencing of virtually any gene by tapping into innate regulatory mechanisms that are conserved among most eukaryotes. The principles that enable transgenic RNAi in cell lines can also be used to create transgenic animals, which express short-hairpin RNAs (shRNAs) in a regulated or tissue-specific fashion. However, RNAi in transgenic animals is somewhat more challenging than RNAi in cultured cells. The activities of promoters that are commonly used for shRNA expression in cell culture can vary enormously in different tissues, and founder lines also typically vary in transgene expression due to the effects of their single integration sites. There are many ways to produce mice carrying shRNA transgenes and the method described here uses recombinase-mediated cassette exchange (RMCE). RMCE permits insertion of the shRNA transgene into a well-characterized locus that gives reproducible and predictable expression in each founder and enhances the probability of potent expression in many cell types. This procedure is more involved and complex than simple pronuclear injection, but if even a few shRNA mice are envisioned, for example, to probe the functions of several genes, the effort of setting up the processes outlined below are well worthwhile. Note that when creating a transgenic mouse, one should take care to use the most potent shRNA possible. As a rule of thumb, the sequence chosen should provide >90% knockdown when introduced into cultured cells at single copy (e.g., on retroviral infection at a multiplicity of ≤0.3). PMID:24003198
Directory of Open Access Journals (Sweden)
Angela F Harper
2017-02-01
Full Text Available Peroxiredoxins (Prxs or Prdxs are a large protein superfamily of antioxidant enzymes that rapidly detoxify damaging peroxides and/or affect signal transduction and, thus, have roles in proliferation, differentiation, and apoptosis. Prx superfamily members are widespread across phylogeny and multiple methods have been developed to classify them. Here we present an updated atlas of the Prx superfamily identified using a novel method called MISST (Multi-level Iterative Sequence Searching Technique. MISST is an iterative search process developed to be both agglomerative, to add sequences containing similar functional site features, and divisive, to split groups when functional site features suggest distinct functionally-relevant clusters. Superfamily members need not be identified initially-MISST begins with a minimal representative set of known structures and searches GenBank iteratively. Further, the method's novelty lies in the manner in which isofunctional groups are selected; rather than use a single or shifting threshold to identify clusters, the groups are deemed isofunctional when they pass a self-identification criterion, such that the group identifies itself and nothing else in a search of GenBank. The method was preliminarily validated on the Prxs, as the Prxs presented challenges of both agglomeration and division. For example, previous sequence analysis clustered the Prx functional families Prx1 and Prx6 into one group. Subsequent expert analysis clearly identified Prx6 as a distinct functionally relevant group. The MISST process distinguishes these two closely related, though functionally distinct, families. Through MISST search iterations, over 38,000 Prx sequences were identified, which the method divided into six isofunctional clusters, consistent with previous expert analysis. The results represent the most complete computational functional analysis of proteins comprising the Prx superfamily. The feasibility of this novel method is
The role of technological innovation in creating radically new product meanings
DEFF Research Database (Denmark)
Krabbe, Anders Dahl
2015-01-01
This paper explores the concept of technological epiphanies from the literature on design driven innovation. A technological epiphany is defined as a product innovation that can be considered radical, both in terms of technology as well as the meaning and experiences it creates through its design....... Three cases of technological epiphanies from the hearing aid industry are analyzed and discussed in terms of how they represent a radical innovation in technology as well as in product meaning and which role the technological aspect has played in the radical innovation of the meaning of the product....... Three different ways in which technology can function as an enabler for the innovation of product meanings are explored and a fourth is found is found during the analysis. The paper concludes by suggesting directions for future research....
Management challenges in creating value from business analytics
Vidgen, Richard; Shaw, S.; Grant, D.G.
2017-01-01
The popularity of big data and business analytics has increased tremendously in the last decade and a key challenge for organizations is in understanding how to leverage them to create business value. However, while the literature acknowledges the importance of these topics little work has addressed them from the organization’s point of view. This paper investigates the challenges faced by organizational managers seeking to become more data and information-driven in order to create value. Emp...
Utilizing Educational Corporate Culture To Create a Quality School.
Osborne, Bill
Strategies for utilizing educational corporate culture to create a quality school are presented in this paper, which argues that the understanding of the shared belief system of organizational members is crucial to the process. Creating a quality school entails moving from a "teach the process" oriented model to one that internalizes the…
Social Dynamics Management and Functional Behavioral Assessment
Lee, David L.
2018-01-01
Managing social dynamics is a critical aspect of creating a positive learning environment in classrooms. In this paper three key interrelated ideas, reinforcement, function, and motivating operations, are discussed with relation to managing social behavior.
Downes, P K
2007-05-26
A website is a window to the outside world. For a dental practice, it may be the first point of contact for a prospective new patient and will therefore provide them with their 'first impression'; this may be days or weeks before actually visiting the practice. This section considers the different ways of creating a dental practice website and lists some of the main dental website design companies. It also describes what factors make a successful website and offers advice on how to ensure that it complies with current regulations and recommendations.
Modified Tumescent Solution for Creating Working Space During Endoscopic Thyroidectomy.
Zhang, Li-Yong; Zhao, Wen-Xin; Wang, Bo; Yan, Shou-Yi; Wen, Jia
2018-04-01
To study the feasibility of gas-liquid mixing tumescent solution for creating a working space (WS) in endoscopic thyroidectomy (ET). A prospective study was performed on 186 patients with thyroid tumor who had undergone ET via chest and breast approach. Patients were randomly divided into 2 groups to receive traditional tumescent solution as group A and modified tumescent solution (gas-liquid mixing tumescent solution) as group B. This study compares the following surgical outcome parameters between the 2 groups, including changes of blood pressure, heart rate, and oxygen saturation before and after creating a WS, time for creating a WS, operative time, hemorrhage volume for creating a WS, overall hemorrhage volume, overall postoperative drainage volume, postoperative pain score, postoperative hospitalization, number of retrieved lymph nodes, total serum calcium, serum parathyroid hormone, and cases of transient and permanent recurrent laryngeal nerve palsy. No postoperative bleeding, permanent recurrent laryngeal nerve palsy, incision and surgical site infection, air embolism, flap injury occurred in both groups. The mean time for creating a WS and the whole operation in group B was significantly shorter than that in group A ( P .05). The clinical application of gas-liquid mixing tumescent solution can effectively reduce the time for creating a WS and whole operative time, and worthy of being widely used in ET as a safe and effective technique.
Creation of hydrophobic surfaces using a paint containing functionalized oxide particles
Sino, Paul Albert L.; Herrera, Marvin U.; Balela, Mary Donnabelle L.
2017-05-01
Hydrophobic surfaces were created by coating various substrates (aluminum sheet, soda-lime glass, silicon carbide polishing paper, glass with double-sided adhesive) with paint containing functionalized oxide particles. The paint was created by functionalizing oxide particles (ground ZnO, TiO2 nanoparticles, or TiO2 microparticles) with fluorosilane molecules in absolute ethanol. Water contact angle of samples shows that the coated substrate becomes hydrophobic (water contact angle ≥ 90°). Among the oxides that were used, ground ZnO yielded contact angle exemplifying superhydrophobicity (water contact angle ≥ 150°). Scanning electron micrograph of paint-containing TiO2 nanoparticles shows rough functionalized oxides structures which probably increase the hydrophobicity of the surface.
Creating Quality Improvement Culture in Public Health Agencies
Mahanna, Elizabeth; Joly, Brenda; Zelek, Michael; Riley, William; Verma, Pooja; Fisher, Jessica Solomon
2014-01-01
Objectives. We conducted case studies of 10 agencies that participated in early quality improvement efforts. Methods. The agencies participated in a project conducted by the National Association of County and City Health Officials (2007–2008). Case study participants included health directors and quality improvement team leaders and members. We implemented multiple qualitative analysis processes, including cross-case analysis and logic modeling. We categorized agencies according to the extent to which they had developed a quality improvement culture. Results. Agencies were conducting informal quality improvement projects (n = 4), conducting formal quality improvement projects (n = 3), or creating a quality improvement culture (n = 4). Agencies conducting formal quality improvement and creating a quality improvement culture had leadership support for quality improvement, participated in national quality improvement initiatives, had a greater number of staff trained in quality improvement and quality improvement teams that met regularly with decision-making authority. Agencies conducting informal quality improvement were likely to report that accreditation is the major driver for quality improvement work. Agencies creating a quality improvement culture were more likely to have a history of evidence-based decision-making and use quality improvement to address emerging issues. Conclusions. Our findings support previous research and add the roles of national public health accreditation and emerging issues as factors in agencies’ ability to create and sustain a quality improvement culture. PMID:24228680
Creating quality improvement culture in public health agencies.
Davis, Mary V; Mahanna, Elizabeth; Joly, Brenda; Zelek, Michael; Riley, William; Verma, Pooja; Fisher, Jessica Solomon
2014-01-01
We conducted case studies of 10 agencies that participated in early quality improvement efforts. The agencies participated in a project conducted by the National Association of County and City Health Officials (2007-2008). Case study participants included health directors and quality improvement team leaders and members. We implemented multiple qualitative analysis processes, including cross-case analysis and logic modeling. We categorized agencies according to the extent to which they had developed a quality improvement culture. Agencies were conducting informal quality improvement projects (n = 4), conducting formal quality improvement projects (n = 3), or creating a quality improvement culture (n = 4). Agencies conducting formal quality improvement and creating a quality improvement culture had leadership support for quality improvement, participated in national quality improvement initiatives, had a greater number of staff trained in quality improvement and quality improvement teams that met regularly with decision-making authority. Agencies conducting informal quality improvement were likely to report that accreditation is the major driver for quality improvement work. Agencies creating a quality improvement culture were more likely to have a history of evidence-based decision-making and use quality improvement to address emerging issues. Our findings support previous research and add the roles of national public health accreditation and emerging issues as factors in agencies' ability to create and sustain a quality improvement culture.
Bioactive Compounds in Functional Meat Products
Ewelina Pogorzelska-Nowicka; Atanas G. Atanasov; Jarosław Horbańczuk; Agnieszka Wierzbicka
2018-01-01
Meat and meat products are a good source of bioactive compounds with positive effect on human health such as vitamins, minerals, peptides or fatty acids. Growing food consumer awareness and intensified global meat producers competition puts pressure on creating new healthier meat products. In order to meet these expectations, producers use supplements with functional properties for animal diet and as direct additives for meat products. In the presented work seven groups of key functional cons...
Creating 3D gelatin phantoms for experimental evaluation in biomedicine
Directory of Open Access Journals (Sweden)
Stein Nils
2015-09-01
Full Text Available We describe and evaluate a setup to create gelatin phantoms by robotic 3D printing. Key aspects are the large workspace, reproducibility and resolution of the created phantoms. Given its soft tissue nature, the gelatin is kept fluid during inside the system and we present parameters for additive printing of homogeneous, solid objects. The results indicate that 3D printing of gelatin can be an alternative for quickly creating larger soft tissue phantoms without the need for casting a mold.
Displaying R spatial statistics on Google dynamic maps with web applications created by Rwui
2012-01-01
Background The R project includes a large variety of packages designed for spatial statistics. Google dynamic maps provide web based access to global maps and satellite imagery. We describe a method for displaying directly the spatial output from an R script on to a Google dynamic map. Methods This is achieved by creating a Java based web application which runs the R script and then displays the results on the dynamic map. In order to make this method easy to implement by those unfamiliar with programming Java based web applications, we have added the method to the options available in the R Web User Interface (Rwui) application. Rwui is an established web application for creating web applications for running R scripts. A feature of Rwui is that all the code for the web application being created is generated automatically so that someone with no knowledge of web programming can make a fully functional web application for running an R script in a matter of minutes. Results Rwui can now be used to create web applications that will display the results from an R script on a Google dynamic map. Results may be displayed as discrete markers and/or as continuous overlays. In addition, users of the web application may select regions of interest on the dynamic map with mouse clicks and the coordinates of the region of interest will automatically be made available for use by the R script. Conclusions This method of displaying R output on dynamic maps is designed to be of use in a number of areas. Firstly it allows statisticians, working in R and developing methods in spatial statistics, to easily visualise the results of applying their methods to real world data. Secondly, it allows researchers who are using R to study health geographics data, to display their results directly onto dynamic maps. Thirdly, by creating a web application for running an R script, a statistician can enable users entirely unfamiliar with R to run R coded statistical analyses of health geographics
What imagination can teach us about higher mental functions
DEFF Research Database (Denmark)
Tateo, Luca
2016-01-01
The chapter uses the history of the concept of imagination as example of how psychology creates a normative model of mental processes that affects our understanding of development. Following the traditional hierarchy of psychological functions, with abstract rationality on top, we fail to underst......The chapter uses the history of the concept of imagination as example of how psychology creates a normative model of mental processes that affects our understanding of development. Following the traditional hierarchy of psychological functions, with abstract rationality on top, we fail...... in fictional world where we can find relief to the disquieting spectacle of the world, nor a sandbox in which we can play with alternative futures. It is one of the higher mental functions that makes the world how we experience it and how we are striving to experience it. The imaginative process plays a self...
Spatial Control of Functional Response in 4D-Printed Active Metallic Structures
Ma, Ji; Franco, Brian; Tapia, Gustavo; Karayagiz, Kubra; Johnson, Luke; Liu, Jun; Arroyave, Raymundo; Karaman, Ibrahim; Elwany, Alaa
2017-04-01
We demonstrate a method to achieve local control of 3-dimensional thermal history in a metallic alloy, which resulted in designed spatial variations in its functional response. A nickel-titanium shape memory alloy part was created with multiple shape-recovery stages activated at different temperatures using the selective laser melting technique. The multi-stage transformation originates from differences in thermal history, and thus the precipitate structure, at various locations created from controlled variations in the hatch distance within the same part. This is a first example of precision location-dependent control of thermal history in alloys beyond the surface, and utilizes additive manufacturing techniques as a tool to create materials with novel functional response that is difficult to achieve through conventional methods.
Functional Generation of Harmony and Melody
Magalhães, José Pedro; Koops, Hendrik Vincent
2014-01-01
We present FCOMP, a system for automatic generation of harmony and accompanying melody. Building on previous work on functional modelling of musical harmony, FCOMP first creates a foundational harmony by generating random (but user-guided) values of a datatype that encodes the rules of tonal
Online by design the essentials of creating information literacy courses
Mery, Yvonne
2014-01-01
As online instruction becomes more popular, librarians will want to develop the knowledge and skills needed to create an effective online information literacy course. Online by Design: The Essentials of Creating Information Literacy Courses will guide librarians as they go through the process of designing, developing, and delivering online information literacy courses. Yvonne Mery & Jill Newby offer proven techniques and tips for creating quality online courses that are engaging and effective. This handbook is perfect for instruction librarians who are interesting in developing new courses or
Creating a Total Object of Art.
Klie, Evelyn Busch
2003-01-01
Discusses a workshop that accompanied the author's exhibit, "A Sense of Place: Paintings by Evelyn Busch Klie." Explains that students created a watercolor painting and a clay frame or base with details in it. Includes a list of art materials and learning objectives. (CMK)
Creating Sustainable Development through Sustainability Bildung
African Journals Online (AJOL)
2018-05-12
May 12, 2018 ... ... to quit their jobs, sell their house, take their children out of school ... the globe is perceived as an object that human beings can affect, damage or protect, but ... have created a fantasy in which we believe that we can distance ...
The NAi effect: creating architecture culture
Figueiredo, S.M.
2016-01-01
At a time when cultural institutions (both in the Netherlands and abroad) are adjusting to new societal and political conditions (and financial restrictions), The NAi Effect aims to elucidate the social and cultural aims of architecture museums and their impact in creating architecture culture.
Creating social impact with side-events
Hover, Paul; Dijk, Bake; Breedveld, Koen; van Eekeren, Frank; Slender, Hans
All over the world, sport events are seen as significant tools for creating positive social impact. This is understandable, as sport events have the power to attract enthusiastic participants, volunteers and to reach large audiences of visitors and followers via (social) media. Outbursts of
Creating social impact with sport events
Hover, P.; Dijk, B.; Breedveld, K.; Eekeren, F.J.A. van; Slender, H.
2016-01-01
All over the world, sport events are seen as significant tools for creating positive social impact. This is understandable, as sport events have the power to attract enthusiastic participants, volunteers and to reach large audiences of visitors and followers via (social) media. Outbursts of
Bendapudi, Neeli; Bendapudi, Venkat
2005-05-01
It's easy to conclude from the literature and the lore that top-notch customer service is the province of a few luxury companies and that any retailer outside that rarefied atmosphere is condemned to offer mediocre service at best. But even companies that position themselves for the mass market can provide outstanding customer-employee interactions and profit from them, if they train employees to reflect the brand's core values. The authors studied the convenience store industry in depth and focused on two that have developed a devoted following: QuikTrip (QT) and Wawa. Turnover rates at QT and Wawa are 14% and 22% respectively, much lower than the typical rate in retail. The authors found six principles that both firms embrace to create a strong culture of customer service. Know what you're looking for: A focus on candidates' intrinsic traits allows the companies to hire people who will naturally bring the right qualities to the job. Make the most of talent: In mass-market retail, talent is generally viewed as a commodity, but that outlook becomes a self-fulfilling prophesy. Create pride in the brand: Service quality depends directly on employees' attachment to the brand. Build community: Wawa and QT have made concerted efforts to build customer loyalty through a sense of community. Share the business context: Employees need a clear understanding of how their company operates and how it defines success. Satisfy the soul: To win an employee's passionate engagement, a company must meet his or her needs for security, esteem, and justice.
76 FR 34658 - The Internet Assigned Numbers Authority (IANA) Functions
2011-06-14
... raised concerns that short-term contracts create instability in the IANA functions process and would... political sustainability of an Internet that supports the free flow of information, goods, and services... account security and stability issues. Commenters were divided on whether the IANA functions should be...
A LabVIEW based template for user created experiment automation.
Kim, D J; Fisk, Z
2012-12-01
We have developed an expandable software template to automate user created experiments. The LabVIEW based template is easily modifiable to add together user created measurements, controls, and data logging with virtually any type of laboratory equipment. We use reentrant sequential selection to implement sequence script making it possible to wrap a long series of the user created experiments and execute them in sequence. Details of software structure and application examples for scanning probe microscope and automated transport experiments using custom built laboratory electronics and a cryostat are described.
Leadership Networking Connect, Collaborate, Create
(CCL), Center for Creative Leadership; Baldwin, David
2011-01-01
Networking is essential to effective leadership in today's organizations. Leaders who are skilled networkers have access to people, information, and resources to help solve problems and create opportunities. Leaders who neglect their networks are missing out on a critical component of their role as leaders. This book will help leaders take a new view of networking and provide insight into how to enhance their networks and become effective at leadership networking.
Designing value-creating supply chain networks
Martel, Alain
2016-01-01
Focusing on the design of robust value-creating supply chain networks (SCN) and key strategic issues related to the number; location, capacity and mission of supply chain facilities (plants, distribution centers) – as well as the network structure required to provide flexibility and resilience in an uncertain world – this book presents an innovative methodology for SCN reengineering that can be used to significantly improve the bottom line of supply chain dependent businesses. Providing readers with the tools needed to analyze and model value creation activities, Designing Value-Creating Supply Chain Networks examines the risks faced by modern supply chains, and shows how to develop plausible future scenarios to evaluate potential SCN designs. The design methods proposed are based on a visual representation formalism that facilitates the analysis and modeling of SCN design problems, book chapters incorporate several example problems and exercises which can be solved with Excel tools (Analysis tools and So...
Co-creating meaning through Artful Inquiry
DEFF Research Database (Denmark)
Darsø, Lotte
2017-01-01
The purpose of this chapter is to point out the need for aesthetic and artful methods for reflection, learning and co-creation. The context is management education focused on developing innovation competency. The data derive from action research, observations and written reports. The main contrib...... of leadership icons as well as co-creating with tangible materials can give rise to new meaning and transformational learning.......The purpose of this chapter is to point out the need for aesthetic and artful methods for reflection, learning and co-creation. The context is management education focused on developing innovation competency. The data derive from action research, observations and written reports. The main...... contribution of this chapter is the introduction of a model for Artful Inquiry, which involves constructing powerful questions and finding appropriate artistic methods for reflecting and for co-creating with people or with artistic material. It is argued that Artful Inquiry can access deeper layers of knowing...
A functional programming interpreter. M.S. Thesis
Robison, Arch Douglas
1987-01-01
Functional Programming (FP) sup BAC87 is an alternative to conventional imperative programming languages. This thesis describes an FP interpreter implementation. Superficially, FP appears to be a simple, but very inefficient language. Its simplicity, however, allows it to be interpreted quickly. Much of the inefficiency can be removed by simple interpreter techniques. This thesis describes the Illinois Functional Programming (IFP) interpreter, an interactive functional programming implementation which runs under both MS-DOS and UNIX. The IFP interpreter allows functions to be created, executed, and debugged in an environment very similar to UNIX. IFP's speed is competitive with other interpreted languages such as BASIC.
Creating a Pilot Educational Psychiatry Website: Opportunities, Barriers, and Next Steps.
Torous, John; O'Connor, Ryan; Franzen, Jamie; Snow, Caitlin; Boland, Robert; Kitts, Robert
2015-11-05
While medical students and residents may be utilizing websites as online learning resources, medical trainees and educators now have the opportunity to create such educational websites and digital tools on their own. However, the process and theory of building educational websites for medical education have not yet been fully explored. To understand the opportunities, barriers, and process of creating a novel medical educational website. We created a pilot psychiatric educational website to better understand the options, opportunities, challenges, and processes involved in the creation of a psychiatric educational website. We sought to integrate visual and interactive Web design elements to underscore the potential of such Web technology. A pilot website (PsychOnCall) was created to demonstrate the potential of Web technology in medical and psychiatric education. Creating an educational website is now technically easier than ever before, and the primary challenge no longer is technology but rather the creation, validation, and maintenance of information for such websites as well as translating text-based didactics into visual and interactive tools. Medical educators can influence the design and implementation of online educational resources through creating their own websites and engaging medical students and residents in the process.
A METHOD FOR CREATING STRUCTURES OR DEVICES USING AN ORGANIC ICE RESIST
DEFF Research Database (Denmark)
2017-01-01
The invention relates to a method for creating an organic resist on a surface of a cooled substrate, the method comprising the steps of condensing a vapour into a solid film on the surface of the cooled substrate; patterning at least part of the solid film by exposing selected portions of said...... solid film to at least one electron beam thereby creating the organic resist on 5 the surface of the cooled substrate in accordance with a predetermined pattern; wherein the created organic resist remains essentially intact at ambient conditions; and using the created organic resist as a mask...... for creating semiconductor structures and/or semiconductor devices....
Creating perturbations from a decaying field during inflation
DEFF Research Database (Denmark)
Mazumdar, A.; Wang, L.
2013-01-01
Typically, the fluctuations generated from a decaying field during inflation do not contribute to the large scale structures. In this paper, we provide an example where it is possible for a field which slowly rolls and then decays during inflation to create all the matter perturbations with a sli......Typically, the fluctuations generated from a decaying field during inflation do not contribute to the large scale structures. In this paper, we provide an example where it is possible for a field which slowly rolls and then decays during inflation to create all the matter perturbations...
Creating symmetry the artful mathematics of wallpaper patterns
Farris, Frank A
2015-01-01
This lavishly illustrated book provides a hands-on, step-by-step introduction to the intriguing mathematics of symmetry. Instead of breaking up patterns into blocks-a sort of potato-stamp method-Frank Farris offers a completely new waveform approach that enables you to create an endless variety of rosettes, friezes, and wallpaper patterns: dazzling art images where the beauty of nature meets the precision of mathematics. Featuring more than 100 stunning color illustrations and requiring only a modest background in math, Creating Symmetry begins by addressing the enigma of a simple curve, who
Co-creating service recovery after service failure: The role of brand equity
Hazee, Simon; Van Vaerenbergh, Yves; Armirotto, Vincent
2017-01-01
Co-creating service recovery with customers has recently appeared as a new perspective in service research. Prior research demonstrates the effectiveness of co-created recovery strategies in driving customer outcomes, and out- lines when co-creating a service recovery is recommended. This paper complements prior research not only by demonstrating the mediating role of outcome favorability in the relationship between co-created service recov- ery and customer outcomes, but also by showing whet...
Multifunctional-layered materials for creating membrane-restricted nanodomains and nanoscale imaging
Energy Technology Data Exchange (ETDEWEB)
Srinivasan, P., E-mail: prasri@ece.ucsb.edu, E-mail: srinivasan@lifesci.ucsb.edu [Department of Electrical and Computer Engineering, University of California, Santa Barbara, California 93106, USA and Neuroscience Research Institute, University of California, Santa Barbara, California 93106 (United States)
2016-01-18
Experimental platform that allows precise spatial positioning of biomolecules with an exquisite control at nanometer length scales is a valuable tool to study the molecular mechanisms of membrane bound signaling. Using micromachined thin film gold (Au) in layered architecture, it is possible to add both optical and biochemical functionalities in in vitro. Towards this goal, here, I show that docking of complementary DNA tethered giant phospholiposomes on Au surface can create membrane-restricted nanodomains. These nanodomains are critical features to dissect molecular choreography of membrane signaling complexes. The excited surface plasmon resonance modes of Au allow label-free imaging at diffraction-limited resolution of stably docked DNA tethered phospholiposomes, and lipid-detergent bicelle structures. Such multifunctional building block enables realizing rigorously controlled in vitro set-up to model membrane anchored biological signaling, besides serving as an optical tool for nanoscale imaging.
Reviewing the National Courts in Creating Orderly International Law and Community
Directory of Open Access Journals (Sweden)
Johanis Leatemia
2017-08-01
Full Text Available Orderly international community and international law are determined by a national court. Essentially, the national court must be competent to maintain the balance between the national interest which based on the national sovereignty as well as the provisions of international law within the framework of peaceful coexistence. This article reviews the role of national courts in creating and developing the customary international law. As it turns out in practice, however, it has certain weaknesses, particularly in view of the accountability and legitimacy aspects of its establishment. This purpose could be achieved if national courts were able to maintain a balance between the national interest based on the sovereignty of State on the one hand and the provisions of international law on the other. The function of the national court was to maintain a balance between international law and national law.
Bioinspired surface functionalization of metallic biomaterials.
Su, Yingchao; Luo, Cheng; Zhang, Zhihui; Hermawan, Hendra; Zhu, Donghui; Huang, Jubin; Liang, Yunhong; Li, Guangyu; Ren, Luquan
2018-01-01
Metallic biomaterials are widely used for clinical applications because of their excellent mechanical properties and good durability. In order to provide essential biofunctionalities, surface functionalization is of particular interest and requirement in the development of high-performance metallic implants. Inspired by the functional surface of natural biological systems, many new designs and conceptions have recently emerged to create multifunctional surfaces with great potential for biomedical applications. This review firstly introduces the metallic biomaterials, important surface properties, and then elaborates some strategies on achieving the bioinspired surface functionalization for metallic biomaterials. Copyright © 2017 Elsevier Ltd. All rights reserved.
Strategies for Creating New Venture Legitimacy
Karlsson, Tomas; Middleton, Karen Williams
2015-01-01
New ventures, being heavily subjected to liabilities of newness, are seen to engage in legitimacy strategies to overcome these liabilities. Building on an adapted theoretical framework of organizational legitimacy, self-reported weekly diaries of twelve entrepreneurs were analysed to identify strategies used by new ventures to create legitimacy.…
Creating Spaces to Support Transgender Youth
McGuire, Jenifer K.; Conover-Williams, Meredith
2010-01-01
This article explores the opportunity to create spaces within the family, school, and community that specifically promote the well-being of transgender adolescents and young adults. When social contexts are supportive, transgender youth report significantly less risk. Supportive home and school environments have been linked to better outcomes…
2003-01-01
A subsidiary of SI Diamond Technology, Inc., Applied Nanotech, of Austin, Texas, is creating a buzz among various technology firms and venture capital groups interested in the company s progressive research on carbon-related field emission devices, including carbon nanotubes, filaments of pure carbon less than one ten-thousandth the width of human hair. Since their discovery in 1991, carbon nanotubes have gained considerable attention due to their unique physical properties. For example, a single perfect carbon nanotube can range from 10 to 100 times stronger than steel, per unit weight. Recent studies also indicate that the nanotubes may be the best heat-conducting material in existence. These properties, combined with the ease of growing thin films or nanotubes by a variety of deposition techniques, make the carbon-based material one of the most desirable for cold field emission cathodes.
Functions of autobiographical memory in Taiwanese and American emerging adults.
Liao, Hsiao-Wen; Bluck, Susan; Alea, Nicole; Cheng, Ching-Ling
2016-01-01
The study addresses cultural and person-level factors contributing to emerging adult's use of memory to serve adaptive functions. The focus is on three functions: self-continuity, social-bonding and directing-behaviour. Taiwanese (N = 85, 52 women) and American (N = 95, 51 women) emerging adults completed the Thinking about Life Experiences scale, and measures of trait personality, self-concept clarity and future time perspective. Findings show that individuals from both cultures use memory to serve these three functions, but Taiwanese individuals use memory more frequently than Americans to maintain self-continuity. Culture also interacted with person-level factors: in Taiwan, but not America, memory is more frequently used to create self-continuity in individuals high in conscientiousness. Across cultures, having lower self-concept clarity was related to greater use of memory to create self-continuity. Findings are discussed in terms of how memory serves functions in context and specific aspects of the Taiwanese and American cultural context that may predict the functional use of memory in emerging adulthood.
Creating by Reusing Learning Design Solutions
Hernández-Leo, Davinia; Harrer, Andreas; Dodero, Juan Manuel; Asensio-Pérez, Juan; Burgos, Daniel
2006-01-01
Hernández-Leo, D., Harrer, A., Dodero, J. M., Asension-Pérez, J. I., & Burgos, D. (2006). Creating by reusing Learning Design solutions. Proceedings of 8th Simposo Internacional de Informática Educativa, León, Spain: IEEE Technical Committee on Learning Technology. Retrieved October 3rd, 2006, from
Creating the Total Quality Effective School.
Lezotte, Lawrence W.
This book shows how Deming's Total Quality Management (TQM) theory for organizational management can be integrated with the effective-schools literature. Part 1 compares the 14 principles of TQM with the tenets of effective-schools research. The second part develops a blueprint for creating the total quality effective school. The conceptual…
CMS Create #2 | 3-4 October | Register now!
2016-01-01
CMS Create brings together CERN members and students from IPAC Design Genève (see here). The goal is to build a prototype exhibit illustrating what CMS does and how it does it. The exhibit will introduce the world of a particle physics detector to the general public, and to younger visitors in particular. CMS Create, hosted by IdeaSquare, was first held in November 2015. There were 4 highly diverse teams made of participants from many educational backgrounds and from 15 nationalities. 36% of these were women; a figure we hope will grow this year. The 25 participants were CMS physicists, computer scientists, engineers, other CMS collaborators and IPAC students. The 2015 winning exhibit is now permanently installed in the visitor reception centre at CMS Point 5, which was visited by 20.600 visitors during 2015. Are you creative and motivated to share your ideas? Take part in CMS Create #2, meet with scientists and designers from all over the world and explain to CER...
Mandatory Parent Education Programs Can Create Positive Youth Sport Experiences
Christofferson, Jennifer; Strand, Bradford
2016-01-01
Youth sport leaders must not ignore the influence parents have on creating a positive developmental experience for young athletes. Therefore, expectations involving parental involvement and conduct must be addressed prior to athletes' participation. This article aims to examine the importance of creating mandatory parental training programs for…
Use FOMO to Create Urgency in the Booking Process
2017-01-01
Create a sense of urgency and “fear of missing out” (FOMO) to nudge people to book faster. People feel more compelled to buy if they believe they are about to miss out on a limited-time offer or a good deal. This type of urgency is about creating “scarcity value,” a concept that OTAs have mastered and implemented systematically on their OTA websites to stimulate purchase behavior.
Creating Great Neighborhoods: Density in Your Community
This report highlights nine community-led efforts to create vibrant neighborhoods through density, discusses the connections between smart growth and density, and introduces design principles to ensure that density becomes a community asset.
ICT and Pragmatism: Creating sustainable Employment for ...
African Journals Online (AJOL)
PROF. OLIVER OSUAGWA
effort to create self employment, this can galvanize unexpected revolution whose consequences will be very grave. The reading .... having a significant impact on the service industries. ..... secure your investment. Additional ..... Nigeria may fail.
Symbiota – A virtual platform for creating voucher-based biodiversity information communities
Directory of Open Access Journals (Sweden)
Corinna Gries
2014-06-01
Full Text Available We review the Symbiota software platform for creating voucher-based biodiversity information portals and communities. Symbiota was originally conceived to promote small- to medium-sized, regionally and/or taxonomically themed collaborations of natural history collections. Over the past eight years the taxonomically diverse portals have grown into an important resource in North America and beyond for mobilizing, integrating, and using specimen- and observation-based occurrence records and derivative biodiversity information products. Designed to mirror the conceptual structure of traditional floras and faunas, Symbiota is exclusively web-based and employs a novel data model, information linking, and algorithms to provide highly dynamic customization. The themed portals enable meaningful access to biodiversity data for anyone from specialist to high school student. Symbiota emulates functionality of modern Content Management Systems, providing highly sophisticated yet intuitive user interfaces for data entry, batch processes, and editing. Each kind of content provision may be selectively accessed by authenticated information providers. Occupying a fairly specific niche in the biodiversity informatics arena, Symbiota provides extensive data exchange facilities and collaborates with other development projects to incorporate and not duplicate functionality as appropriate.
Creating Teams Increases Extension Educator Productivity
Chalker-Scott, Linda; Daniels, Catherine H.; Martini, Nicole
2016-01-01
The Garden Team at Washington State University is a transdisciplinary group of faculty, staff, and students with expertise in applied plant and soil sciences and an interest in Extension education. The team's primary mission is to create current, relevant, and peer-reviewed materials as Extension publications for home gardeners. The average yearly…
creating social presence in large classes
African Journals Online (AJOL)
Social presence refers to the ability of students to project themselves as 'real people' in an online learning community. While it is difficult to create social presence in large classes, educational technologies can enhance the social dimension of online learning if educators relinquish the use of technology as an instrument of ...
Transforming the Brute : On the Ethical Acceptability of Creating Painless Animals
Mittelstadt, Brent
2009-01-01
Transforming the Brute addresses the ethical acceptability of creating painless animals for usage in biomedical experimentation. In recent decades the possibility of creating genetically decerebrate animals or AMLs for human ends has been discussed in scientific, academic, and corporate communities. While the ability to create animals that cannot feel, experience, and are more plant than animal remains science fiction, biomedicine may now be able to eliminate or significantly reduce the cap...
24 CFR 4100.1 - Functions and activities.
2010-04-01
... reverse negative real estate market trends, enhance new residential growth, and create renewed... lending criteria. Programs and strategies to remove blighting influences, obtain improved public services and amenities, and improve the neighborhood's image and the functioning of its real estate market are...
Twelve tips for creating an academic teaching portfolio.
Little-Wienert, Kim; Mazziotti, Mark
2018-01-01
An academic teaching portfolio is not only a requirement at many academic teaching institutions, but it is also important in a medical educator's growth and development through documentation, reflection, evaluation, and change. Creating an academic portfolio may appear daunting at first but with careful advanced preparation, organized evidence collection of your educational work, proof of scholarship, and thorough documentation of self-reflection and change, you can produce a successful product that accurately represents your educational beliefs, accomplishments, and growth throughout your career. This article provides medical educators with twelve steps for creating a successful academic teaching portfolio.
Creating Cartoons to Promote Leaderships Skills and Explore Leadership Qualities
Smith, Latisha L.; Clausen, Courtney K.; Teske, Jolene K.; Ghayoorrad, Maryam; Gray, Phyllis; Al Subia, Sukainah; Atwood-Blaine, Dana; Rule, Audrey C.
2015-01-01
This document describes a strategy for increasing student leadership and creativity skills through the creation of cartoons. Creating cartoons engages students in divergent thinking and cognitive processes, such as perception, recall, and mental processing. When students create cartoons focused on a particular topic, they are making connections to…
Creating an Economically Enabling and Competitive Business ...
International Development Research Centre (IDRC) Digital Library (Canada)
Creating an Economically Enabling and Competitive Business Environment in the ... the scope of operations of private sector enterprises in the West Bank and Gaza. ... IWRA/IDRC webinar on climate change and adaptive water management.
Taking medicine at home - create a routine
... page: //medlineplus.gov/ency/patientinstructions/000613.htm Taking medicine at home - create a routine To use the ... teeth. Find Ways to Help You Remember Your Medicines You can: Set the alarm on your clock, ...
Creating three-dimensional thermal maps
CSIR Research Space (South Africa)
Price
2011-11-01
Full Text Available stream_source_info Price_2011.pdf.txt stream_content_type text/plain stream_size 30895 Content-Encoding ISO-8859-1 stream_name Price_2011.pdf.txt Content-Type text/plain; charset=ISO-8859-1 Creating Three...-Dimensional Thermal Maps Mathew Price Cogency cc Cape Town Email: mathew@cogency.co.za Jeremy Green CSIR Centre for Mining Innovation Johannesburg Email: jgreen@csir.co.za John Dickens CSIR Centre for Mining Innovation Johannesburg Email: jdickens...
Pinho, Ana Luísa; de Manzano, Örjan; Fransson, Peter; Eriksson, Helene; Ullén, Fredrik
2014-04-30
Musicians have been used extensively to study neural correlates of long-term practice, but no studies have investigated the specific effects of training musical creativity. Here, we used human functional MRI to measure brain activity during improvisation in a sample of 39 professional pianists with varying backgrounds in classical and jazz piano playing. We found total hours of improvisation experience to be negatively associated with activity in frontoparietal executive cortical areas. In contrast, improvisation training was positively associated with functional connectivity of the bilateral dorsolateral prefrontal cortices, dorsal premotor cortices, and presupplementary areas. The effects were significant when controlling for hours of classical piano practice and age. These results indicate that even neural mechanisms involved in creative behaviors, which require a flexible online generation of novel and meaningful output, can be automated by training. Second, improvisational musical training can influence functional brain properties at a network level. We show that the greater functional connectivity seen in experienced improvisers may reflect a more efficient exchange of information within associative networks of importance for musical creativity.
Syringe-vacuum microfluidics: A portable technique to create monodisperse emulsions.
Abate, Adam R; Weitz, David A
2011-03-16
We present a simple method for creating monodisperse emulsions with microfluidic devices. Unlike conventional approaches that require bulky pumps, control computers, and expertise with device physics to operate devices, our method requires only the microfluidic device and a hand-operated syringe. The fluids needed for the emulsion are loaded into the device inlets, while the syringe is used to create a vacuum at the device outlet; this sucks the fluids through the channels, generating the drops. By controlling the hydrodynamic resistances of the channels using hydrodynamic resistors and valves, we are able to control the properties of the drops. This provides a simple and highly portable method for creating monodisperse emulsions.
3D game environments create professional 3D game worlds
Ahearn, Luke
2008-01-01
The ultimate resource to help you create triple-A quality art for a variety of game worlds; 3D Game Environments offers detailed tutorials on creating 3D models, applying 2D art to 3D models, and clear concise advice on issues of efficiency and optimization for a 3D game engine. Using Photoshop and 3ds Max as his primary tools, Luke Ahearn explains how to create realistic textures from photo source and uses a variety of techniques to portray dynamic and believable game worlds.From a modern city to a steamy jungle, learn about the planning and technological considerations for 3D modelin
Soft Systems Methodology Embedded in Organizational Knowledge-Creating Process
Yoshida, Taketoshi
2005-01-01
We clarify the role of tacit knowing in the soft systems methodology. For the purpose we investigate the basic structure of its seven-stage model, while embedding the soft systems methodology in organizational knowledge-creating process. This leads to the introduction of concept creation to the methodology. This changes the basic shape of the soft systems methodology from learning cycle to organizational knowledge-creating spiral where concept creation is the key point.
10 ways to create shareholder value.
Rappaport, Alfred
2006-09-01
Executives have developed tunnel vision in their pursuit of shareholder value, focusing on short-term performance at the expense of investing in long-term growth. It's time to broaden that perspective and begin shaping business strategies in light of the competitive landscape, not the shareholder list. In this article, Alfred Rappaport offers ten basic principles to help executives create lasting shareholder value. For starters, companies should not manage earnings or provide earnings guidance; those that fail to embrace this first principle of shareholder value will almost certainly be unable to follow the rest. Additionally, leaders should make strategic decisions and acquisitions and carry assets that maximize expected value, even if near-term earnings are negatively affected as a result. During times when there are no credible value-creating opportunities to invest in the business, companies should avoid using excess cash to make investments that look good on the surface but might end up destroying value, such as ill-advised, overpriced acquisitions. It would be better to return the cash to shareholders in the form of dividends and buybacks. Rappaport also offers guidelines for establishing effective pay incentives at every level of management; emphasizes that senior executives need to lay their wealth on the line just as shareholders do; and urges companies to embrace full disclosure, an antidote to short-term earnings obsession that serves to lessen investor uncertainty, which could reduce the cost of capital and increase the share price. The author notes that a few types of companies--high-tech start-ups, for example, and severely capital-constrained organizations--cannot afford to ignore market pressures for short-term performance. Most companies with a sound, well-executed business model, however, could better realize their potential for creating shareholder value by adopting the ten principles.
Ponizovskiy, Michail R
2016-01-01
Interactions between nucleus and mitochondria functions induce the mechanism of maintenance stability of cellular internal energy according to the first law of thermodynamics in able-bodied cells and changes the mechanisms of maintenance stability of cellular internal energy creating a transition stationary state of ablebodied cells into quasi-stationary pathologic states of acute inflammation transiting then into chronic inflammation and then transmuting into cancer metabolism. The mechanisms' influences of intruding etiologic pathologic agents (microbe, virus, etc.) lead to these changes of energy interactions between nucleus and mitochondria functions causing general acute inflammation, then passing into local chronic inflammation, and reversing into cancer metabolism transmutation. Interactions between biochemical processes and biophysical processes of cellular capacitors' operations create a supplementary mechanism of maintenance stability of cellular internal energy in the norm and in pathology. Discussion of some scientific works eliminates doubts of the authors of these works.
OPPOSITIONS CREATING HOMOUR IN JOKES
Directory of Open Access Journals (Sweden)
Umral Deveci
2016-12-01
Full Text Available Human beings, who perceive the reality of death however who do not know when it will happen, begin their life with this deficiency. Therefore, throughout their lives, they struggle to consummate and make up for the things that they perceive as deficiency or shortcomings through different ways. Humor is one of these means. The fact that deficiencies are eliminated results in superiority and relaxation. The sense of humor and relaxation simultaneously provide laughter. When theories of humor such as superiority, incongruous and relief are taken into consideration, it seems that these theories are related and support each other. Each text is whole with its form and content, which should be evaluated as a whole as much as possible. Hence this study dwells on shortcomings in jokes and in the lights of these shortcomings and theories of humor, it is intended tomake humor in stories, in terms of structural and semantic context, more concrete. Five stories/jokes randomly selected through samples are analyzed in this article. There are two basic types of opposition. The firstone is opposition that creates situation, the second one is thatcreates laughter. The first opposition depicts the shortcomings of knowledge, skill, patience arrogance and jealousyand prepares the second opposition. The opposition that creates laughter make up for shortcomings through cause and effect relationship and laughter comes out.
Creating an outpatient center of excellence in CT.
Itri, Jason N; Bakow, Eric; Woods, Jordan
2014-12-01
CT examinations represent a substantial portion of the workload for many radiology departments, and optimizing service delivery is a critical function to ensure customer satisfaction. This article describes how the Six Sigma methodology was used in the radiology department at a large academic hospital to improve the patient experience and increase CT capacity while reducing waste and improving staff satisfaction. The 5 distinct phases of Six Sigma are reviewed as they apply to our CT Center of Excellence project: define, measure, analyze, improve, and control. Process metrics used in this project include the percentage of outpatient CT exams started within 5 minutes of the scheduled appointment time, and the number of studies with protocols selected >48 hours before the CT exam is performed. Outcome metrics include monthly department expense per scan and CT Press Ganey "standard test and treatment" mean scores. An approach to developing interventions is described based on identifying critical sources of variation, ranking these by creating risk prioritization numbers, performing root cause analysis, and utilizing the failure mode and effects analysis tool to prioritize possible solutions. Finally, the key features of action plans and a control plan are reviewed. Copyright © 2014 American College of Radiology. Published by Elsevier Inc. All rights reserved.
Captivate MenuBuilder: Creating an Online Tutorial for Teaching Software
Yelinek, Kathryn; Tarnowski, Lynn; Hannon, Patricia; Oliver, Susan
2008-01-01
In this article, the authors, students in an instructional technology graduate course, describe a process to create an online tutorial for teaching software. They created the tutorial for a cyber school's use. Five tutorial modules were linked together through one menu screen using the MenuBuilder feature in the Adobe Captivate program. The…
Engineering Encounters: Creating a Prosthetic Hand
Cook, Kristin Leigh; Bush, Sarah B.; Cox, Richard
2015-01-01
The power of 3D printing technology has grown exponentially in just the past few years--people around the world are using 3D printers to prepare food, create tailored clothing, build cars and homes, and advance the medical field in ways that never seemed possible. In classrooms across the nation, 3D printers have become increasingly common because…
Creating Smart-er Cities: An Overview
Allwinkle, Sam; Cruickshank, Peter
2011-01-01
The following offers an overview of what it means for cities to be "smart." It draws the supporting definitions and critical insights into smart cities from a series of papers presented at the 2009 Trans-national Conference on Creating Smart(er) Cities. What the papers all have in common is their desire to overcome the all too often…
Use of created snags by cavity‐nesting birds across 25 years
Barry, Amy M.; Hagar, Joan; Rivers, James W.
2018-01-01
Snags are important habitat features for many forest‐dwelling species, so reductions in the number of snags can lead to the loss of biodiversity in forest ecosystems. Intentional snag creation is often used in managed forests to mitigate the long‐term declines of naturally created snags, yet information regarding the use of snags by wildlife across long timescales (>20 yr) is lacking and prevents a complete understanding of how the value of created snags change through time. We used a long‐term experiment to assess how harvest treatment (i.e., small‐patch group selection, 2‐story, and clearcut) and snag configuration (i.e., scattered and clustered) influenced nesting in and foraging on 25–27‐year‐old Douglas‐fir (Pseudotsuga menziesii) snags by cavity‐nesting birds. In addition, we compared our contemporary measures of bird use to estimates obtained from historical surveys conducted on the same group of snags to quantify how bird use changed over time. Despite observing created snags for >750 hours across 2 consecutive breeding seasons, we found limited evidence of nesting activity. Only 11% of created snags were used for breeding, with nesting attempts by 4 bird species (n = 36 nests); however, we detected 12 cavity‐nesting species present on our study sites. Furthermore, nearly all nests (94%) belonged to the chestnut‐backed chickadee (Poecile rufescens), a weak cavity‐excavating species that requires well‐decayed wood for creating nest cavities. Our surveys also recorded few observations of birds using created snags as foraging substrates, with only 1 foraging event recorded for every 20 hours of observation. We detected 82% fewer nests and recorded 7% fewer foraging observations during contemporary field work despite spending >7.5 times more effort observing created snags relative to historical surveys. We conclude that 25–27‐year‐old created Douglas‐fir snags provided limited opportunities for nesting and foraging by
Legal and Organizational Issues in Collaborative User-Created Content
Sarvas, Risto
2005-01-01
Introduction In this paper we look into issues that arise when people collaboratively create digital content and want to publicly distribute it. We identify and analyze the issues based on four case studies on amateur content production. In our analysis we discuss the issues both from the amateurs’ point of view, and also, from the game brand owners’ perspective. User-created content (UCC) in games has become popular as demonstrated by game-related skins, mods and extensions, screenshots, gam...
CREATING DIGITAL ELEVATION MODEL USING A MOBILE DEVICE
Directory of Open Access Journals (Sweden)
A. İ. Durmaz
2017-11-01
Full Text Available DEM (Digital Elevation Models is the best way to interpret topography on the ground. In recent years, lidar technology allows to create more accurate elevation models. However, the problem is this technology is not common all over the world. Also if Lidar data are not provided by government agencies freely, people have to pay lots of money to reach these point clouds. In this article, we will discuss how we can create digital elevation model from less accurate mobile devices’ GPS data. Moreover, we will evaluate these data on the same mobile device which we collected data to reduce cost of this modeling.
Picture models for 2-scene comics creating system
Directory of Open Access Journals (Sweden)
Miki UENO
2015-03-01
Full Text Available Recently, computer understanding pictures and stories becomes one of the most important research topics in computer science. However, there are few researches about human like understanding by computers because pictures have not certain format and contain more lyric aspect than that of natural laguage. For picture understanding, a comic is the suitable target because it is consisted by clear and simple plot of stories and separated scenes.In this paper, we propose 2 different types of picture models for 2-scene comics creating system. We also show the method of the application of 2-scene comics creating system by means of proposed picture model.
Creating sustainable city by enhancing social capital
Affandi, R. A.; Mursitama, T. N.
2018-03-01
Scholars have been discussing social capital since the last two decades. They analyzed from various perspectives such as sociology, education, political participation, strengthening democratic values and economic empowerment of the society. However, study related to the implementation that benefits directly to the society is needed. This study examines how to create a sustainable city by enhancing social capital from both macro and micro analyses. This combination of analysis offers deeper understanding both from decision makers at city level and individuals, groups and society. We will conduct qualitative approach mainly by interviews and direct observation to collect the data. also, we also analyze publicly available data. Finally, this study contributes to new understanding in creating a sustainable city, not only about the environment and physical aspects, but also about ensuring political economic, democratic values, and social welfare.
Novel device for creating continuous curvilinear capsulorhexis.
Soylak, Mustafa
2016-01-01
The purpose of this paper is to develop a novel capsulorhexis system. Mechatronics Laboratory, University of Erciyes and Kayseri Maya Eye Hospital. A 3D model was created and simulations were conducted to develop a new device which was designed, fabricated and tested for continuous curvilinear capsulorhexis (CCC). The name of this system is the electro-mechanical capsulorhexis system (EMCS). The 3D model was created by using a commercial design software and a 3D printer was used to fabricate the EMCS Finite element analysis and geometrical relation tests of the EMCS for different sized lenses were performed. The results show that the EMCS is a perfect solution for capsulorhexis surgeries, without mechanical or geometrical problems. The EMCS can open the anterior lens capsule more easily and effectively than manual CCC applications and needs less experience.
Updated Photonuclear Data Library and Database for Photon Strength Functions
Directory of Open Access Journals (Sweden)
Dimitriou Paraskevi
2015-01-01
Full Text Available Photonuclear cross sections and gamma-ray data used to extract Photon Strength Functions are important for a large range of applications including basic sciences. The recommendations of an IAEA Consultant’s Meeting to update the IAEA Photonuclear Data Library and create a Reference Database for Photon Strength Functions are presented.
A summary of the CMS Create event
CERN. Geneva; GASTAL, Martin
2016-01-01
The maiden CMS Create event took place in November 2015 and was a huge success. The output from all the participants was fantastic. As organisers we learnt a lot and hope to build on our experience for the 2016 event!
More Sci- than Fi, Physicists Create Antimatter
Overbye, Dennis
2002-01-01
Physicists working in Europe announced yesterday that they had passed through nature's looking glass and had created atoms made of antimatter, or antiatoms, opening up the possibility of experiments in a realm once reserved for science fiction writers (5 pages)
IBES: A Tool for Creating Instructions Based on Event Segmentation
Directory of Open Access Journals (Sweden)
Katharina eMura
2013-12-01
Full Text Available Receiving informative, well-structured, and well-designed instructions supports performance and memory in assembly tasks. We describe IBES, a tool with which users can quickly and easily create multimedia, step-by-step instructions by segmenting a video of a task into segments. In a validation study we demonstrate that the step-by-step structure of the visual instructions created by the tool corresponds to the natural event boundaries, which are assessed by event segmentation and are known to play an important role in memory processes. In one part of the study, twenty participants created instructions based on videos of two different scenarios by using the proposed tool. In the other part of the study, ten and twelve participants respectively segmented videos of the same scenarios yielding event boundaries for coarse and fine events. We found that the visual steps chosen by the participants for creating the instruction manual had corresponding events in the event segmentation. The number of instructional steps was a compromise between the number of fine and coarse events. Our interpretation of results is that the tool picks up on natural human event perception processes of segmenting an ongoing activity into events and enables the convenient transfer into meaningful multimedia instructions for assembly tasks. We discuss the practical application of IBES, for example, creating manuals for differing expertise levels, and give suggestions for research on user-oriented instructional design based on this tool.
IBES: a tool for creating instructions based on event segmentation.
Mura, Katharina; Petersen, Nils; Huff, Markus; Ghose, Tandra
2013-12-26
Receiving informative, well-structured, and well-designed instructions supports performance and memory in assembly tasks. We describe IBES, a tool with which users can quickly and easily create multimedia, step-by-step instructions by segmenting a video of a task into segments. In a validation study we demonstrate that the step-by-step structure of the visual instructions created by the tool corresponds to the natural event boundaries, which are assessed by event segmentation and are known to play an important role in memory processes. In one part of the study, 20 participants created instructions based on videos of two different scenarios by using the proposed tool. In the other part of the study, 10 and 12 participants respectively segmented videos of the same scenarios yielding event boundaries for coarse and fine events. We found that the visual steps chosen by the participants for creating the instruction manual had corresponding events in the event segmentation. The number of instructional steps was a compromise between the number of fine and coarse events. Our interpretation of results is that the tool picks up on natural human event perception processes of segmenting an ongoing activity into events and enables the convenient transfer into meaningful multimedia instructions for assembly tasks. We discuss the practical application of IBES, for example, creating manuals for differing expertise levels, and give suggestions for research on user-oriented instructional design based on this tool.
Leadership: creating a cuiture of caring.
DePaola, Dominick P
2004-01-01
Leadership is characterized in terms of accomplishing mutual goals for the organization, its employees, and its community through vision and creating a community of caring. The examples of Herb Kelleher of Southwest Airlines, Walt Disney, and Dean Arthur A. Dugoni of the University of the Pacific are used to illustrate how this style of leadership plays out in specific accomplishments.
Photocatalytic Solutions Create Self-Cleaning Surfaces
2013-01-01
A Stennis Space Center researcher investigating the effectiveness of photocatalytic materials for keeping the Center's buildings free of grime turned to a solution created by PURETi Inc. of New York City. Testing proved successful, and NASA and the company now share a Dual Use Technology partnership. PURETi's coatings keep surfaces clean and purify surrounding air, eliminating pollution, odors, and microbes.
Creating Value through Virtual Teams: A Current Literature Review
Directory of Open Access Journals (Sweden)
Akemi Takeoka Chatfield
2014-11-01
Full Text Available Globally, virtual teams (VT as ICT-enabled emergent network organisation forms have gained international validity by innovative organisations, with a corresponding surge of interest in understanding how organisations can leverage VT to create business value. Despite growing deliberations in VT literature on managing VT, tasks and outcomes, however, creating business value through VT remains an unresolved theoretical and pragmatic conundrum. A review of prior relevant literature is essential to advancing knowledge. The paucity of published review articles seems to have impeded the field’s accumulation of VT knowledge. This research, therefore, reviews the current literature on case studies of VT to address the question: What are organisational challenges in creating business value through VT in the organisation? The key challenges found in the literature are effective communication, knowledge sharing, trust, and interpersonal skills in the new virtual boundary-less environment. Drawing on the IT business value model, we also discuss their resource-based implications.
Creating the future with all finance and financial conglomerates
Berghe, Lutgart
1998-01-01
Creating the Future with All Finance and Financial Conglomerates comprises an academic search for an understanding of all finance and financial conglomerates. It presents a strategic and economic analysis of diversification strategies and the growing interface between different types of financial firms. On the basis of a solid analysis of theoretical foundations and practical value, the book develops basic concepts of creating the future: especially solutions in managing risks and fresh ideas for the development of integrated financial services. The structure of the book is logical: starting on theoretical foundations (section 1, part A) and examining the economic value of All Finance and Financial Conglomerates (part B), leads to creating a concept for the future (part C). Case studies add additional practical value to this research. The review of the subject is completed by aspects of risk management in this sector and by political guidelines for the EU single market (section 2). The book builds further on ...
Functional porous composites by blending with solution-processable molecular pores.
Jiang, S; Chen, L; Briggs, M E; Hasell, T; Cooper, A I
2016-05-25
We present a simple method for rendering non-porous materials porous by solution co-processing with organic cage molecules. This method can be used both for small functional molecules and for polymers, thus creating porous composites by molecular blending, rather than the more traditional approach of supporting functional molecules on pre-frabricated porous supports.
Practice It: Create a Weekly Activity Plan
At the beginning of the week, create an activity plan to help you reach your goals. Start by identifying your goals for the week. Based on your goals, write down when you are going to exercise and what you are going to do.
Orthogonal functionalization of nanoporous substrates: control of 3D surface functionality.
Lazzara, Thomas D; Kliesch, Torben-Tobias; Janshoff, Andreas; Steinem, Claudia
2011-04-01
Anodic aluminum oxide (AAO) membranes with aligned, cylindrical, nonintersecting pores were selectively functionalized in order to create dual-functionality substrates with different pore-rim and pore-interior surface functionalities, using silane chemistry. We used a two-step process involving an evaporated thin gold film to protect the underlying surface functionality of the pore rims. Subsequent treatment with oxygen plasma of the modified AAO membrane removed the unprotected organic functional groups, i.e., the pore-interior surface. After gold removal, the substrate became optically transparent, and displayed two distinct surface functionalities, one at the pore-rim surface and another at the pore-interior surface. We achieved a selective hydrophobic functionalization with dodecyl-trichlorosilane of either the pore rims or the pore interiors. The deposition of planar lipid membranes on the functionalized areas by addition of small unilamellar vesicles occurred in a predetermined fashion. Small unilamellar vesicles only ruptured upon contact with the hydrophobic substrate regions forming solid supported hybrid bilayers. In addition, pore-rim functionalization with dodecyl-trichlorosilane allowed the formation of pore-spanning hybrid lipid membranes as a result of giant unilamellar vesicle rupture. Confocal laser scanning microscopy was employed to identify the selective spatial localization of the adsorbed fluorescently labeled lipids. The corresponding increase in the AAO refractive index due to lipid adsorption on the hydrophobic regions was monitored by optical waveguide spectroscopy. This simple orthogonal functionalization route is a promising method to control the three-dimensional surface functionality of nanoporous films. © 2011 American Chemical Society
Creating a culture for information systems success
Belkhamza, Zakariya
2015-01-01
It has been widely reported that issues related to organizational context appear frequently in discussions of information systems success. The statement that the information system did not fit the behavioral context in an organization is often part of the explanation of why particular information system encountered unanticipated resistance and never met expectation. While this context has been intensively studied, we still lack evidence on how this organizational context is affecting the success of information system from a managerial action perspective. This type of managerial involvement is often neglected to the extent that it became an essential obstacle to organizational performance. The objective of Creating a Culture for Information Systems Success is to assist CIOs and IT managers on how to use their managerial actions to create a suitable cultural environment in the organization, which leads to a successful implementation of information systems. This book will also provide guidelines fo...
YEYGEL CAKIR, Sinem; TEMEL EGINLI, Aysen
2013-01-01
Electronic applications have gained importance in Electronic Customer Relationship Management (CRM) together with integrating information transmission technology with especially marketing function actively and communication’s channelling to electronic atmosphere. Together with CRM, especially analytic CRM concept has become in forefront position, it has become a development towards analysing to information gathered with data searching to communicate with customers and create opportunities to ...
Restructuring the Russian electricity sector: Re-creating California?
International Nuclear Information System (INIS)
Pittman, Russell
2007-01-01
The Russian Federation has begun restructuring its electricity sector, following the standard restructuring model of complete vertical separation of generation from transmission, with the aim of creating competition in regional generation markets. This paper examines the structure of the six principal regional generation markets that are in their early stages of development and argues that they are likely to be characterized by high levels of market power on the part of individual privatized generation companies, especially during the peak winter demand season. These levels-considerably higher than those that caused competitive problems in California-seem to create a serious risk of price spikes in deregulated wholesale electricity markets, and thus of significant price increases to consumers of electricity
Create a new vision for indigenous development
Energy Technology Data Exchange (ETDEWEB)
Chavez Alba, Rafael; Sanchez Arancibia, Oscar Armando [TRANSIERRA S.A., Santa Cruz (Bolivia)
2009-07-01
Transierra is a Bolivian company created in the year 2000 with the goal of transporting natural gas from the fields of San Alberto and San Antonio, in Tarija, to the Rio Grande Gas Compression Plant in Santa Cruz, for export to Brazil. Transierra has implemented a Social Action Plan, which allowed it to execute more than 800 community projects for the benefit of over 40 thousand families living in it's area of influence, with the presence of 146 indigenous communities, generally lagging behind in economic and productive life in the region and country. The Support Program to Guarani Development Plans (PA-PDG) is part of the Social Plan and is part of a long-term agreement signed between Transierra and indigenous organizations. The program has implemented more than one hundred projects for productive development, health, education, cultural revaluation, and strengthening organizational infrastructure, generating huge benefits in improving the living conditions of thousands of families of the Guarani people. This year a unique initiative was created with 4 Indigenous Captains and with the support of the International Finance Corporation (World Bank Group), including Business Plans to promote sustainable economic growth, created productive economic cycles involving improvements to the production and productivity to enter the commercial distribution of local and national markets. These four initiatives have meant a shift in the implementation and is helping to generate new dynamics in production, in addition to capturing significant resources from public and private investment, laying the groundwork for the improvement of the incomes and quality of life of its beneficiaries. (author)
Creating a digital medical illustration.
Culley, Joanna
2016-01-01
This paper covers the steps required to complete a medical illustration in a digital format using Adobe Illustrator and Photoshop. The project example is the surgical procedure for the release of the glenohumeral joint for the condition known as 'frozen shoulder'. The purpose is to demonstrate one method which an artist can use within digital media to create a colour illustration such as the release of the glenohumeral joint. Included is a general overview as how to deal with the administration of a medical illustration commission through the experience of a professional freelance artist.
International Nuclear Information System (INIS)
Furtner, J.; Prayer, D.; Sachs, G.
2010-01-01
Cognitive impairments are core psychopathological components of the symptomatic of schizophrenic patients. These dysfunctions are generally related to attention, executive functions and memory. This report provides information on the importance of using functional magnetic resonance imaging (fMRI) for the diagnostics and therapy monitoring of the different subtypes of cognitive dysfunctions. Furthermore, it describes the typical differences in the activation of individual brain regions between schizophrenic patients and healthy control persons. This information should be helpful in identifying the deficit profile of each patient and create an individual therapy plan. (orig.) [de
Creating an Excellence Oriented Post-merged Organisational ...
African Journals Online (AJOL)
This article specifically focuses on the importance of a structured approach to the implementation of employee engagement strategies in creating a post-merged organisational culture of excellent work performance. Theoretical insights from existing literature illustrate how a structured approach to the implementation of ...
Reflecting User-Created Persona in Indigenous Namibia
DEFF Research Database (Denmark)
Gonzalez-Cabrero, Daniel; Koch Kapuire, Gereon; Winschiers-Theophilus, Heike
2015-01-01
This paper presents the initial experiences and reflective accounts on the arrival of a European research colleague who recently joined our team of researchers working with Indigenous communities in Namibia. He aims to explore how communities across Namibia take on, understand and create persona...
Creating a winning team: lessons from football.
Simons, Sherri Lee
2005-01-01
There are tasks best done on an individual basis when caring for a neonate, but the ultimate outcome for infants and their families results from a team effort. Incorporating ten strategies drawn from football can help the NICU manager create and foster effective teamwork.
Creating natural-looking removable prostheses: combining art and science to imitate nature.
Patras, Michael; Kourtis, Stefanos; Sykaras, Nikitas
2012-06-01
Patient awareness of dental appearance has increased, resulting in more demanding esthetic requests. There is also strong evidence that increased esthetics is highly significant for complete denture acceptance and success. Taking notice of patients' perceptions of natural appearance and esthetics, the clinician can incorporate their preferences in the construction of individualized dentures that will be harmonized with their facial characteristics. Despite the evolution of materials and techniques, the vast majority of dentures still fail to look natural. Thus, producing prostheses that defy detection and successfully restore the appearance of edentulous patients remains a challenge for the clinician. This paper presents a clinical case where immediate loading of implants supporting a mandibular overdenture was combined with an opposing conventional maxillary denture to satisfy the high functional and esthetic demands of the patient. It also emphasizes the individualized esthetic performance through customization during their fabrication while taking into consideration the various clinical parameters affecting rehabilitation of the edentulous jaw. Implant-retained overdentures can significantly improve the patients' function. The esthetic performance of these restorations however, may not be satisfying the patients' expectations and demands. Customizing the artificial gingival areas and individual staining of the prefabricated acrylic teeth may improve the esthetic performance creating natural-looking removable prostheses. © 2011 Wiley Periodicals, Inc.
Blender production creating short animations from start to finish
Hess, Roland
2012-01-01
Blender has become one of the most popular 3D animation tools on the market because it is robust and absolutely free. Blender Production is the definitive resource for anyone who wants to create short animations from scratch. With this book, and Blender, you have the ideal platform to make it happen. Blender expert and author Roland Hess walks you through the entire process of creating a short animation including: writing, storyboarding, blocking, character creation, animation, rendering, and production. The associated web site includes the full Blender software kit and a compl
The role of employees and human resource management in creating brand values
Directory of Open Access Journals (Sweden)
Virijević-Jovanović Saša
2017-01-01
Full Text Available Regarding the definitions of brand, which indicate that the purpose of branding is to create long-term relationships with consumers, brand management can be defined as the process of building consumer loyalty towards the brand. A brand is more than just a product. Practice shows that branded products have been built on for many years, by raising the level of quality, and creating a special relationship with consumers. In the process of creating loyal customer there is a great importance of human resources whose skills, competence and empathy influence the brand positioning. Considering the importance of human resource management, the paper explores the role of employees in the process of creating brand value.
Exploring Protein Function Using the Saccharomyces Genome Database.
Wong, Edith D
2017-01-01
Elucidating the function of individual proteins will help to create a comprehensive picture of cell biology, as well as shed light on human disease mechanisms, possible treatments, and cures. Due to its compact genome, and extensive history of experimentation and annotation, the budding yeast Saccharomyces cerevisiae is an ideal model organism in which to determine protein function. This information can then be leveraged to infer functions of human homologs. Despite the large amount of research and biological data about S. cerevisiae, many proteins' functions remain unknown. Here, we explore ways to use the Saccharomyces Genome Database (SGD; http://www.yeastgenome.org ) to predict the function of proteins and gain insight into their roles in various cellular processes.
Professional BlazeDS Creating Rich Internet Applications with Flex and Java
Tiwari, Shashank
2009-01-01
A hands-on guide to creating Rich Internet Applications (RIA) using BlazeDS. BlazeDS enables you to easily connect to back-end distributed data and push data in real time to Adobe Flex and Adobe AIR applications in order to garner more responsive Rich Internet Application (RIA) experiences. It is a scalable option for Flex and Java integration and allows you to create excellent RIAs with both Flex and Java. This informative resource provides you with detailed examples and walkthroughs that explain the best practices for creating RIAs using BlazeDS. You'll begin with the essentials of BlazeDS a
Expenses for creating software as an object of accounting: the nature and classification
Directory of Open Access Journals (Sweden)
I.V. Perviy
2015-12-01
Full Text Available The reasons of development of the accounting classification of expenses for computer programs have been grounded. The features of the market of IT services in Ukraine have been analyzed and its future prospects have been determined. The reasons to provide users with information of the costs of creating computer programs have been defined and grounded. Complex classification of computer software creating costs based on the selection of six characteristics (for stage by creating a computer program; for the ability to be expenced on specific computer program; for the connection of costs with created computer program; for constancy; for the elements of costs; for the value chain have been developed and grounded. Information prerequisites to ensure the effectiveness of strategic management process of creating computer software based on the classification of costs in the value chain have been allocated. Role of complex classification of computer software creating costs in accounting have been grounded.
Method and Apparatus for Creating a Topography at a Surface
Adams, David P.; Sinclair, Michael B.; Mayer, Thomas M.; Vasile, Michael J.; Sweatt, William C.
2008-11-11
Methods and apparatus whereby an optical interferometer is utilized to monitor and provide feedback control to an integrated energetic particle column, to create desired topographies, including the depth, shape and/or roughness of features, at a surface of a specimen. Energetic particle columns can direct energetic species including, ions, photons and/or neutral particles to a surface to create features having in-plane dimensions on the order of 1 micron, and a height or depth on the order of 1 nanometer. Energetic processes can include subtractive processes such as sputtering, ablation, focused ion beam milling and, additive processes, such as energetic beam induced chemical vapor deposition. The integration of interferometric methods with processing by energetic species offers the ability to create desired topographies at surfaces, including planar and curved shapes.
CREATING INPUT TABLES FROM WAPDEG FOR RIP
International Nuclear Information System (INIS)
K.G. Mon
1998-01-01
The purpose of this calculation is to create tables for input into RIP ver. 5.18 (Integrated Probabilistic Simulator for Environmental Systems) from WAPDEG ver. 3.06 (Waste Package Degradation) output. This calculation details the creation of the RIP input tables for TSPA-VA REV.00
Creating an Economically Enabling and Competitive Business ...
International Development Research Centre (IDRC) Digital Library (Canada)
Creating an Economically Enabling and Competitive Business Environment in the West Bank and Gaza Strip. The prospect of indefinite Israeli occupation of the Palestinian territories, and their extreme dependence on foreign assistance and Israeli-controlled customs revenues, had led to the conclusion that the Palestinian ...
Creating an Economically Enabling and Competitive Business ...
International Development Research Centre (IDRC) Digital Library (Canada)
Creating an Economically Enabling and Competitive Business Environment in the West Bank and Gaza Strip. The prospect of indefinite Israeli occupation of the ... Impact of implementing the Palestinian banking law on the performance of the private sector [Arabic language]. Documents. Impact of the commercial agents law ...
Creating value-focused healthcare delivery systems: Part three--Core competencies.
Beveridge, R N
1997-01-01
Value is created through the delivery of high-quality, cost--effective healthcare services. The ability to create value from the providers' perspective is facilitated through the development and implementation of essential, customer-focused core competencies. These core competencies include customer relationship management, payer/provider relationship management, disease management, outcomes management, financial/cost management, and information management. Customer relationship management is the foundation upon which all core competencies must be built. All of the core competencies must focus on the needs of the customers, both internal and external. Structuring all processes involved in the core competencies from the perspective of the customer will ensure that value is created throughout the system. Payer/provider relationship management will become a crucial pillar for healthcare providers in the future. As more vertical integration among providers occurs, the management of the relationships among providers and with payers will become more important. Many of the integration strategies being implemented across the country involve the integration of hospitals, physicians, and payers to form accountable health plans. The relationships must be organized to form "win/win" situations, where all parties are focused on a shared vision of creating value and none of the parties benefits at the expense of the others. Disease management in creating value requires that we begin examining the disease process along the entire continuum. Not only must providers be able to provide high-quality acute and chronic care, but they must also begin to focus more heavily on programs of prevention. Value is created throughout the system through reducing the prevalence and incidence of disease. Only through managing the full continuum of health will value be created throughout the healthcare delivery system. Outcomes management ensures that the outcomes are the highest quality at a cost
Engineering the functional fitness of transglycosidases and ...
African Journals Online (AJOL)
The artificial implementation of the Darwinian theory of evolution to create new variants of functional proteins, a process referred to as directed evolution, has acquired many applications in biochemical engineering. Directed evolution is a handy tool in the nascent science of glycobiology, where it is used in the conversion of ...
Dickey, Chandlee; Dismukes, Rodney; Topor, David
2014-06-01
The authors describe the Harvard South Shore Psychiatry Residency Training Program curriculum "Creating Opportunities for Organizational Leadership," an innovative, multitiered, resident-driven, outcome-focused set of experiences designed to develop residents' leadership skills in personal leadership, organizational leadership, negotiation, strategic thinking, and systems redesign.
Communicating Disparity: How Social Design can create Public ...
African Journals Online (AJOL)
chrischisoni
Key words: Inequality; communication; social design; storytelling ... created unevenness, which can destroy dignity, self-confidence and esteem. .... divides, which involves gaps between groups in awareness, adoption, skills, devices, use and.
Damianou, C.; Ioannides, K.; Hadjisavvas, V.; Mylonas, N.; Couppis, A.; Iosif, D.; Kyriacou, P. A.
2010-01-01
Magnetic Resonance Imaging (MRI) was utilized to monitor lesions created at temperature below the boiling point and lesions created at temperature above the boiling point using High Intensity Focused Ultrasound (HIFU) in freshly excised kidney, liver and brain and in vivo rabbit kidney and brain. T2-weighted fast spin echo (FSE) was proven as an excellent MRI sequence that can detect lesions with temperature above the boiling point in kidney. This advantage is attributed to the significant di...
Solving Complex Problems to Create Charter Extension Options
DEFF Research Database (Denmark)
Tippmann, Esther; Nell, Phillip Christopher
undertaken by 29 subsidiary units supports our hypotheses, demonstrating that these activities are a means to systematically reduce inherent problem solving biases. This study contributes to problem solving theory, the literature on headquarters’ roles in complex organizations, as well as the literature......This study examines subsidiary-driven problem solving processes and their potential to create advanced solutions for charter extension options. Problem solving theory suggests that biases in problem formulation and solution search can confine problem solving potential. We thus argue that balanced...... solution search, or activities to reconcile the need for some solution features to be locally-tailored while others can be internationally standardized, mediates the relationships between problem complexity/headquarters involvement and the capacity to create advanced solutions. An analysis of 67 projects...
Playing with the Camera - Creating with Each Other
DEFF Research Database (Denmark)
Vestergaard, Vitus
2015-01-01
, it is imperative to investigate how museum users in a group create videos and engage with each other and the exhibits. Based on research on young users creating videos in the Media Mixer, this article explores what happens during the creative process in front of a camera. Drawing upon theories of museology, media......Many contemporary museums try to involve users as active participants in a range of new ways. One way to engage young people with visual culture is through exhibits where users produce their own videos. Since museum experiences are largely social in nature and based on the group as a social unit......, learning and creativity, the article discusses how to operationalize and make sense of seemingly chaotic or banal production processes in a museum....
How do entrepreneurs think they create value?
DEFF Research Database (Denmark)
Lyth Frederiksen, Dennis; Brem, Alexander
2017-01-01
The means with which entrepreneurs create and capture value can be difficult to get a comprehensive picture of. Looking at the tools they use can offer insights, and in this context, the book “The Lean Startup” by Eric Ries has received a tremendous amount of attention. Supposedly, many...
The Media Creates Us in Its Image
Stivers, Richard
2012-01-01
Propaganda in all its forms is the culture of a mass society. The media transmits propaganda to form public opinion and recreate the human being. Reversing the Western ideal of a rational and free individual, the media creates a childish conformist ensconced in the peer group, who acts unconsciously.
Student-Created Public Relations for Gifted Education.
Bisland, Amy
2003-01-01
This article discusses the benefits of student participation in a gifted public relations campaign, including creating public support for gifted programming and developing leadership skills. Steps for developing a formal unit of instruction on public relations are described, along with ideas for public relations activities. (Contains references.)…
Creating grander families: older adults adopting younger kin and nonkin.
Hinterlong, James; Ryan, Scott
2008-08-01
There is a dearth of research on older adoptive parents caring for minor children, despite a growing number of such adoptions finalized each year. This study offers a large-scale investigation of adoptive families headed by older parents. We describe these families and explore how preadoptive kinship between the adoptive parent and the child impacts adoption outcomes. We analyze data from kin (n = 98) and nonkin (n = 310) adoptive families headed by adults aged 60 years and older. We find that older kin adoptive families are smaller, report lower income, and include adoptive mothers with less formal education. Children in these families had less severe needs for special care at the time of placement. Although kin and nonkin older parents offer similar assessments of their parent-child relationships, kin adopters indicate a greater willingness to adopt the same child again and yet report less positive current family functioning. Multivariate regression analyses reveal that preadoptive kinship predicts more negative parental assessment of the adoption's impact on the family and less positive family functioning net of other parent, family, and child characteristics. Externalizing behavior by the child (e.g., delinquency or aggression) is the strongest predictor of deleterious outcomes for both groups. Kin adoption by older adults creates new families under strain but does not reduce parental commitment to the child. We conclude that older adults serve as effective adoptive parents but would benefit from preadoption and postadoption services to assist them in preparing for and positively addressing the challenging behaviors exhibited by adopted children.
Creating Porcine Biomedical Models Through Recombineering
Directory of Open Access Journals (Sweden)
Lawrence B. Schook
2006-03-01
Full Text Available Recent advances in genomics provide genetic information from humans and other mammals (mouse, rat, dog and primates traditionally used as models as well as new candidates (pigs and cattle. In addition, linked enabling technologies, such as transgenesis and animal cloning, provide innovative ways to design and perform experiments to dissect complex biological systems. Exploitation of genomic information overcomes the traditional need to choose naturally occurring models. Thus, investigators can utilize emerging genomic knowledge and tools to create relevant animal models. This approach is referred to as reverse genetics. In contrast to ‘forward genetics’, in which gene(s responsible for a particular phenotype are identified by positional cloning (phenotype to genotype, the ‘reverse genetics’ approach determines the function of a gene and predicts the phenotype of a cell, tissue, or organism (genotype to phenotype. The convergence of classical and reverse genetics, along with genomics, provides a working definition of a ‘genetic model’ organism (3. The recent construction of phenotypic maps defining quantitative trait loci (QTL in various domesticated species provides insights into how allelic variations contribute to phenotypic diversity. Targeted chromosomal regions are characterized by the construction of bacterial artificial chromosome (BAC contigs to isolate and characterize genes contributing towards phenotypic variation. Recombineering provides a powerful methodology to harvest genetic information responsible for phenotype. Linking recombineering with gene-targeted homologous recombination, coupled with nuclear transfer (NT technology can provide ‘clones’ of genetically modified animals.
Advanced hydraulic fracturing methods to create in situ reactive barriers
International Nuclear Information System (INIS)
Murdoch, L.; Siegrist, B.; Vesper, S.
1997-01-01
Many contaminated areas consist of a source area and a plume. In the source area, the contaminant moves vertically downward from a release point through the vadose zone to an underlying saturated region. Where contaminants are organic liquids, NAPL may accumulate on the water table, or it may continue to migrate downward through the saturated region. Early developments of permeable barrier technology have focused on intercepting horizontally moving plumes with vertical structures, such as trenches, filled with reactive material capable of immobilizing or degrading dissolved contaminants. This focus resulted in part from a need to economically treat the potentially large volumes of contaminated water in a plume, and in part from the availability of construction technology to create the vertical structures that could house reactive compounds. Contaminant source areas, however, have thus far remained largely excluded from the application of permeable barrier technology. One reason for this is the lack of conventional construction methods for creating suitable horizontal structures that would place reactive materials in the path of downward-moving contaminants. Methods of hydraulic fracturing have been widely used to create flat-lying to gently dipping layers of granular material in unconsolidated sediments. Most applications thus far have involved filling fractures with coarse-grained sand to create permeable layers that will increase the discharge of wells recovering contaminated water or vapor. However, it is possible to fill fractures with other compounds that alter the chemical composition of the subsurface. One early application involved development and field testing micro-encapsulated sodium percarbonate, a solid compound that releases oxygen and can create aerobic conditions suitable for biodegradation in the subsurface for several months
Creating a collage: a meaningful interactive classroom strategy.
Seymour, R J
1995-01-01
How can students be helped to make personal meaning of their nursing knowledge? The author describes one strategy, that of creating a collage, that promoted interactive learning and the making of meaning.
Reiner, Bruce I
2013-02-01
While occupational stress and fatigue have been well described throughout medicine, the radiology community is particularly susceptible due to declining reimbursements, heightened demands for service deliverables, and increasing exam volume and complexity. The resulting occupational stress can be variable in nature and dependent upon a number of intrinsic and extrinsic stressors. Intrinsic stressors largely account for inter-radiologist stress variability and relate to unique attributes of the radiologist such as personality, emotional state, education/training, and experience. Extrinsic stressors may account for intra-radiologist stress variability and include cumulative workload and task complexity. The creation of personalized stress profiles creates a mechanism for accounting for both inter- and intra-radiologist stress variability, which is essential in creating customizable stress intervention strategies. One viable option for real-time occupational stress measurement is voice stress analysis, which can be directly implemented through existing speech recognition technology and has been proven to be effective in stress measurement and analysis outside of medicine. This technology operates by detecting stress in the acoustic properties of speech through a number of different variables including duration, glottis source factors, pitch distribution, spectral structure, and intensity. The correlation of these speech derived stress measures with outcomes data can be used to determine the user-specific inflection point at which stress becomes detrimental to clinical performance.
A flexible system for creating music while interacting with the computer
Obrenovic, Z.
2005-01-01
Music is a very important part of our lives. People enjoy listening to the music, and many of us find a special pleasure in creating the music. Computers further extended many aspects of our musical experience. Listening to, recording, and creating music is now easier and more accessible to various
Creating healthy work in small enterprises - from understanding to action
DEFF Research Database (Denmark)
Stephen, Legg; Ian S., laird; Olsen, Kirsten Bendix
2014-01-01
Although much is known about small and medium enterprises (SMEs), our current knowledge and understanding of occupational health and safety (OHS) and the work environment in SMEs is limited. Far less is known about how SMEs put our knowledge of OSH into action. In short, how do we create healthy...... work and healthy lives as well as ‘healthy business' in SMEs? The present paper, which also acts as an editorial for this special issue, addresses these questions by providing a summary of current knowledge - our understanding - about how to create healthy work and healthy lives for workers and owner......-managers in SMEs whilst concurrently also aiming to create a healthy business (in terms of profitability and sustainability). This paper and the special issue also emphasise the need to convert this knowledge into action - ‘from understanding to action'....
The role of knowledge in the processes of creating and implementing innovations
Directory of Open Access Journals (Sweden)
Baruk Jerzy
2016-09-01
Full Text Available The dynamics of changes taking place in the environment of organizations encourages them to design and implement internal changes allowing to sustain the balance between the organizations and their environment. These changes concern the formulation of the main goal of an organization, process and structural solutions, management concept, relations with clients, a different look at resources, using knowledge as a source of innovation etc. One of the conditions for the functioning and development of contemporary organizations is systemic utilization of knowledge for solving the emerging problems, including the creation of innovations. Satisfying this condition requires using knowledge in management. The purpose of this work is to show that knowledge plays a fundamental role in the processes of generating and implementing innovation, that’s why the process of creating innovation has to be manager in a rational way, according to the proposed models.
Understanding Critical Thinking to Create Better Doctors
Zayapragassarazan, Zayabalaradjane; Menon, Vikas; Kar, Sitanshu Sekhar; Batmanabane, Gitanjali
2016-01-01
Medical students master an enormous body of knowledge, but lack systematic problem solving ability and effective clinical decision making. High profile reports have called for reforms in medical education to create a better generation of doctors who can cope with the system based problems they would encounter in an interdisciplinary and…
Implementing Public-Private Partnerships in Agriculture. Creating ...
International Development Research Centre (IDRC) Digital Library (Canada)
Ida St-Martin
2012-03-26
Mar 26, 2012 ... that agriculture can be improved by creating specific solutions along the value chain. .... How can research such as that produced by the CGIAR system help the New Vision for ..... include projects dealing with vaccinations for goats, fertilizer, ..... the war against malaria means eliminating the parasite and ...
Does the New Economy Create Higher Productivity?
DEFF Research Database (Denmark)
Dilling-Hansen, Mogens; Madsen, Erik Strøjer; Smith, Valdemar
2002-01-01
The rapid and continuous growth in the US in the 1990s and the simultaneous boom in the IT industry created the concept "The New Economy". What connects the two phenomena is that the IT industry alone is considered productive, and increased productivity in other industries, as a result of increased...
Creating the Grateful School in Four Phases
Griffith, Owen M.
2018-01-01
Author and educator Owen Griffith shares how leaders can infuse small acts of gratitude to energize their schools and create a positive, thriving culture. Leaders must begin by practicing gratitude personally, then slowly introducing the practice to their faculty and eventually students. With the right attitude and creativity, the acts of…
Extending the "Knowledge Advantage": Creating Learning Chains
Maqsood, Tayyab; Walker, Derek; Finegan, Andrew
2007-01-01
Purpose: The purpose of this paper is to develop a synergy between the approaches of knowledge management in a learning organisation and supply chain management so that learning chains can be created in order to unleash innovation and creativity by managing knowledge in supply chains. Design/methodology/approach: Through extensive literature…
Ludic Function of Precedent-Related Phenomena in Media Discourse
Directory of Open Access Journals (Sweden)
Yu. M. Velykoroda
2016-12-01
Full Text Available The aim of this paper is to determine the ludic function of precedent-related phenomena as a type of intertextuality. The analysis is done on the basis of relevance theoretic approach, through which we aim to show the additional cognitive effect which is created by precedent-related phenomena in media discourse, and this comic effect serves as a foundation for the ludic function of these units.
Creating a Culture of Connection: A Postmodern Punk Rock Approach to Art Therapy
Drass, Jessica Masino
2016-01-01
Punk culture is based on an ideology that emphasizes questioning conformity and creating a space for individuality within community. It has inspired fans to create their own music and art as part of their quest for authenticity. Art therapy informed by punk culture can be a way to create a culture of connection while also building resiliency and…
Story-dialogue: creating community through storytelling
Doyle-Jones, Carol Sarah
2006-01-01
This narrative case study examines the role of storytelling in creating community with a grade 7 class. Twelve girls and eleven boys, ages 12 to 13, participated in this classroom-based study. Students engaged in three structured storytelling activities incorporating home-to-school stories, story responses, and classroom presentations. First, students’ parents/guardians told a coming-of-age or Confirmation story to their child. Second, at school, students shared their family story with a part...
Strong branding creates a competitive edge.
Wagner, Peggy
2007-01-01
This article encompasses the basics of branding and how it relates to radiology organizations. It also provides tools to help develop your brand. To effectively use branding as a component of your marketing strategy, it is important to follow 3 basic principles: focus on where you excel, understand the existing markets, and be consistent. You do not need to be a large hospital, imaging center, or department to create a brand identity.
Creating load for new hydrogen production
International Nuclear Information System (INIS)
Smith, R.
2006-01-01
This presentation provides an update of the activities of the Hydrogen Village. The Hydrogen Village is a public-private partnership of approximately 40 companies with the goal of advancing awareness of the environmental, economic and social benefits of hydrogen and fuel cell technologies. The intent of the hydrogen village is to create a sustainable commercial market for these technologies within the Greater Toronto Area and to help to catalyze such markets in other areas
Estimation of acoustic resonances for room transfer function equalization
DEFF Research Database (Denmark)
Gil-Cacho, Pepe; van Waterschoot, Toon; Moonen, Marc
2010-01-01
Strong acoustic resonances create long room impulse responses (RIRs) which may harm the speech transmission in an acoustic space and hence reduce speech intelligibility. Equalization is performed by cancelling the main acoustic resonances common to multiple room transfer functions (RTFs), i...
Chemomechanical functionalization and patterning of silicon.
Yang, Li; Lua, Yit-Yian; Lee, Michael V; Linford, Matthew R
2005-12-01
The chemomechanical method has emerged as a straightforward and convenient tool for simultaneously functionalizing and patterning silicon. This technique simply consists of wetting (or exposing) a silicon surface to a reactive chemical and then scribing. Scribing activates the surface and leads to monolayer formation. The properties of the monolayers are dependent on the reactive chemicals used, and mixed monolayers and funtionalized monolayers are easily produced with mixed chemicals or alpha,omega-bifunctional compounds, respectively. Both micrometer and nanometer sized functionalized features have been created. It has been shown that this technique has potential in a variety of applications.
Digital Natives: Creating Emergent Exhibitions through Digital Technologies
DEFF Research Database (Denmark)
Smith, Rachel Charlotte; Iversen, Ole Sejer; Dindler, Christian
2011-01-01
. In this way, digital technology can contribute to the creation of emergent exhibitions in which the exhibition is created in dialogue between audiences and the museum. We present experiences from a current research project, the Digital Natives exhibition, in which digital technology was designed......Digital Technology can support the creation of dialogical spaces in the museum, both playful and reflective, that allow audiences to engage in the ongoing construction and reproduction of cultural heritage creating novel connections between self and others and between past, present and future...... as an integral part of the exhibition to encourage dialogue between audiences and the exhibition materials and thereby investigate how the exhibition emerge as a result of this dialogic co-construction inside the exhibition space. In short, the opportunities offered by digital technologies prompts us to consider...
Inclusive Information Societies: Creating Growth and Employment ...
International Development Research Centre (IDRC) Digital Library (Canada)
Employment for youth and women. The project has two components. The first focuses on outsourcing service sector work (micro-work and rural impact sourcing) in India, Sri Lanka, and the Philippines. This sector can play a vital role in creating employment, particularly for youth and women in semi-urban and rural areas.
Creating a Ninth-Grade Community of Care
Ellerbrock, Cheryl R.; Kiefer, Sarah M.
2010-01-01
This qualitative case study analyzed how one large high school created a community of care for ninth-grade students. Data were collected during the 2006-2007 school year, including observations, individual interviews, and focus group interviews of 1 female teacher and 9 of her students. Findings suggest the Freshman Focus teachers and program…
Value-Creating Networks: Organizational Issues and Challenges
Allee, Verna
2009-01-01
Purpose: The purpose of this paper is to provide examples of evaluating value-creating networks and to address the organizational issues and challenges of a network orientation. Design/methodology/approach: Value network analysis was first developed in 1993 and was adapted in 1997 for intangible asset management. It has been applied from shopfloor…
Creating a Data Warehouse using SQL Server
DEFF Research Database (Denmark)
Sørensen, Jens Otto; Alnor, Karl
1999-01-01
In this paper we construct a Star Join Schema and show how this schema can be created using the basic tools delivered with SQL Server 7.0. Major objectives are to keep the operational database unchanged so that data loading can be done with out disturbing the business logic of the operational...
Celebrity endorsements versus created spokespersons in advertising: a survey among students
Directory of Open Access Journals (Sweden)
Delarey Van der Waldt
2011-08-01
Full Text Available In this study the use of endorsements in advertising was investigated. Endorsements can either be in the form of a celebrity acting as a spokesperson for an organisation or the organisation can create a spokesperson to act as an endorser. The problem that faces marketers is that little scientific proof exists if students perceive celebrity endorsements and creative spokespersons differently with regard to their expertise and trustworthiness. The aim of this study was to determine the attitudes of respondents with regard to expertise, trustworthiness and attractiveness of created spokesperson and celebrity endorsements in advertisements. This knowledge will provide marketing professionals with the strategic advantage of how and when to make use of an endorser. Ohanian’s (1990 measurement scale of perceived expertise, trustworthiness and attractiveness was adopted in a self-administrative questionnaire for this article. Respondents (n=185 were exposed to six visual images of endorsers namely: three celebrities and three created spokespersons. It was found that attractiveness should not be used as a factor when comparing created endorsers with celebrity endorsers. The respondents perceived both endorsement applications as highly credible and professionals need to consider each application’s advantages and disadvantages when deciding which application will be more effective for their advertising strategy. In the long term the organisation might find it more cost effective to create its own spokesperson due to the risk of possible characteristics changes or negative associations of celebrity endorsers. Revoking advertisements after celebrity endorsers have received negative publicity or changed character can lead to great financial losses. Created endorsers, on the other hand, provide the organisation with greater control and the ability to change to adapt to the organisations market and advertising needs.
"In Our Own Words": Creating Videos as Teaching and Learning Tools
Directory of Open Access Journals (Sweden)
Norda Majekodunmi
2012-11-01
Full Text Available Online videos, particularly those on YouTube, have proliferated on the internet; watching them has become part of our everyday activity. While libraries have often harnessed the power of videos to create their own promotional and informational videos, few have created their own teaching and learning tools beyond screencasting videos. In the summer of 2010, the authors, two librarians at York University, decided to work on a video project which culminated in a series of instructional videos entitled “Learning: In Our Own Words.” The purpose of the video project was twofold: to trace the “real” experience of incoming students and their development of academic literacies skills (research, writing and learning throughout their first year, and to create videos that librarians and other instructors could use as instructional tools to engage students in critical thinking and discussion. This paper outlines the authors’ experience filming the videos, creating a teaching guide, and screening the videos in the classroom. Lessons learned during this initiative are discussed in the hope that more libraries will develop videos as teaching and learning tools.
Dictionary criticism and lexicographical function theory
DEFF Research Database (Denmark)
Tarp, Sven
2017-01-01
This contribution discusses dictionary criticism in the light of the function theory. It starts analyzing the objective of dictionary criticism and lists eight of the most important purposes with which criticism has been made by supporters of the function theory. It then discusses the two main...... types of dictionary criticism, namely criticism of other authors’ dictionaries and self-criticism of one’s own dictionaries. Based on this discussion, it proceeds to a definition of the concept of dictionary criticism which is above all considered a theory-based activity, the outcome of which may...... by the supporters of the function theory, and the way it could be presented in order to create debate. Finally, the contribution indicates the important role dictionary criticism has had in the development of the function theory and endorses an open and critical discussion culture within lexicography....
Full Text Available ... steps you take Help change the conversation about type 2 diabetes. Recipes and More: Diabetes Food Hub - ... }, success: function (data) { $('#survey-errors').remove(); $('. ...
DEFF Research Database (Denmark)
Evers, Winie; Sørensen, Kirsten Bonde
To know how to maintain or restore ongoing performance in a firm, managers need to have deep understanding of their business model and the relations on which it is built (Demil & Lecocq, 2010:243). Connected relationships are enabling the survival and growth of firms, as argued by Hakansson...... & Snehota (1995), and effective relational participation therefore involves understanding of one’s own and relational partners’ business models, including the value they seek from their network (George and Bock, 2010). But little research focus on how design can reveal dominant mental models and support...... better relational interaction between firm and its stakeholders, when meeting to co-create viable and value creating business model ideas....
UTILIZATION OF PLANT PROTEINS IN FUNCTIONAL NUTRITION
Directory of Open Access Journals (Sweden)
V. G. Kulakov
2017-01-01
Full Text Available Development of functional food products technology is considered to be a prospect way for creating new food products. Such products are known to be popular among consumers. Utilization of plant proteins allows to widen and improve food assortment and quality. The article represents a review of plant proteins utilization in production of functional food. For optimization of flour confectionery chemical composition the authors utilized a method of receipts modeling. Simulation of combined products is based on the principles of food combinatorics and aims to create recipes of new types of food products on basis of methods of mathematical optimization by reasonable selection of the basic raw materials, ingredients, food additives and dietary supplements, totality of which ensures formation desired organoleptic, physical and chemical properties product as well as a predetermined level of food, biological and energy value. Modeling process of combined products recipes includes the following three stages: preparation of input data for the design, formalization requirements for the composition and properties of raw ingredients and quality final product, process modeling; product design with desired structural properties.
Directory of Open Access Journals (Sweden)
Liina Unt
2014-12-01
Full Text Available The comparison between theatre and playing has spread on many levels, from metaphors to sayings, aesthetic concepts to deterministic models. This paper examines scenography as an active play environment. Play, in the context of theatre space, is defined according to the classical characteristic features of playing: spatial and temporal limits, fictionality that runs in parallel with everyday reality, and direct involvement. The paper focuses on the specific aspects of play environment as it appears in the Tartu New Theatre’s performances of „The Death of the Author“ and „The Beatles of Vanemuine“. Both productions are set in fictional locations with a visually static set design. Both are unique in that different locations are created without changing the physical space on stage – places appear and disappear through the performances, created by an odd textual allusion or two, or the audience’s imagination. The changes can be understood through the audience’s corporal perception, which this paper interprets using Merleau-Ponty’s phenomenological concept of corporeity. Using Tartu New Theatre’s stage practice and Hans-Georg Gadamer’s hermeneutic aesthetics, the paper aims to answer the question: what is the aesthetic structure of such stage environments and how can an environmental experience be created, if the direct interference in space is minimal. Gadamer’s aesthetic concept revolves around play, interpreting works of art as a structure, a meaningful whole that can be presented and comprehended repeatedly. However, he qualifies that the structure, itself, is also a play as, despite a theoretic unity, it only exists when it is played. In this case, the scenography becomes an environment with open meanings, where attributing meaning and function happens through the agreements made during the act of playing, which don’t necessarily also imply physical changes to the environment. The environment is an agreed-upon space
Creating and Maintaining Student Diversity: Strategies and Challenges for School Leaders
Villavicencio, Adriana
2016-01-01
The purpose of this paper was to explore how school leaders can create and maintain student diversity in charter schools. Based on a case study of two racially balanced schools in New York City, this study identifies three strategies that the schools' leaders took to create more student diversity: (1) develop curriculum-centred missions, (2)…
A Learner-Created Virtual Patient Curriculum for Surgical Residents: Successes and Failures.
McKendy, Katherine M; Posel, Nancy; Fleiszer, David M; Vassiliou, Melina C
2016-01-01
To determine the feasibility and effectiveness of a learner-created virtual patient (VP) curriculum for postgraduate year 2 surgical residents. Using a social-constructivist model of learning, we designed a learner-created VP curriculum to help postgraduate year 2 residents prepare for their in-training surgical examination. Each resident was assigned to create a VP curriculum based on the learning objectives for this examination, and VP cases were then disseminated to all residents for completion. To measure the learning effects of the curriculum, participants completed 2 simulated in-training examinations, both at the beginning and at the end of the intervention. Study participants also participated in a focus group and completed an online questionnaire about the perceived learning value of the curriculum. The study was conducted at the McGill University Health Centre, a tertiary care hospital in Montreal, Canada. In total, 24 residents from 7 surgical specialties completed both the pretest and posttest, as well as took part in the creation of a VP curriculum. Of those 24 residents, only 19 residents completed the cases created by their peers, with 7 completing greater than 50% of the cases and 12 completing less than 50%. In all 17 residents responded to the online questionnaire and 11 residents participated in the focus group. The VP curriculum failed to improve scores from pretest (59.6%, standard deviation = 8.1) to posttest (55.4%, standard deviation = 6.6; p = 0.01) on the simulated in-training examination. Nonetheless, survey results demonstrated that most residents felt that creating a VP case (89%) and completing cases created by their peers (71%) had educational value. Overall, 71% preferred active participation in a curriculum to traditional didactic teaching. The focus group identified time-related constraints, concern about the quality of the peer-created cases, and questioning of the relationship between the curriculum and the Surgical Foundations
Early Mandarin Literacy in a Class-created Reading Library
Directory of Open Access Journals (Sweden)
Reed Riggs
2017-06-01
Full Text Available This article explores methods for creating an extensive reading (ER library during the first weeks of language instruction, illustrated here in a college Mandarin course. Data include student-created texts, video transcripts of students reading in groups, field notes, and a student perceptions survey. Taken together the data provide a snapshot of how students in a beginning-level university Mandarin course can utilize Internet resources to create and use a personalized ER library. ER has been shown in previous research to enrich known words (Waring & Takaki, 2003, and provide opportunities for early literacy in languages that use nonalphabetic scripts like Japanese (Hitosugi & Day, 2004. Mandarin texts feature Chinese characters, which exhibit a low reliability in sound-meaning-visual associations, effectively blocking learners from sounding out unfamiliar words and clearly identifying meaning (Everson et al., 2016. The data here show how learners were able to connect prior knowledge from their own culture to new communicative situations in the form of printed comic books to read in class in small groups. Learners were found to connect understandings between their own culture and the target culture, focusing particularly on cultural similarities.
von Hippel, E; Thomke, S; Sonnack, M
1999-01-01
Most senior managers want their product development teams to create break-throughs--new products that will allow their companies to grow rapidly and maintain high margins. But more often they get incremental improvements to existing products. That's partly because companies must compete in the short term. Searching for breakthroughs is expensive and time consuming; line extensions can help the bottom line immediately. In addition, developers simply don't know how to achieve breakthroughs, and there is usually no system in place to guide them. By the mid-1990s, the lack of such a system was a problem even for an innovative company like 3M. Then a project team in 3M's Medical-Surgical Markets Division became acquainted with a method for developing breakthrough products: the lead user process. The process is based on the fact that many commercially important products are initially thought of and even prototyped by "lead users"--companies, organizations, or individuals that are well ahead of market trends. Their needs are so far beyond those of the average user that lead users create innovations on their own that may later contribute to commercially attractive breakthroughs. The lead user process transforms the job of inventing breakthroughs into a systematic task of identifying lead users and learning from them. The authors explain the process and how the 3M project team successfully navigated through it. In the end, the team proposed three major new product lines and a change in the division's strategy that has led to the development of breakthrough products. And now several more divisions are using the process to break away from incrementalism.
Creating a Regional Healthcare Network: People First.
Michel-Verkerke, Margreet B
2016-01-01
Care organizations in the Dutch region Apeldoorn want to collaborate more in order to improve the care provision to elderly and psychiatric patients living independently. In order to support the collaboration they intend to create a regional digital healthcare network. The research was focused on the relevance of a regional healthcare network for care providers. Eleven semi-structured interviews based on the USE IT-model, were conducted with care providers and staff members. Results show that care providers need to tune their activities for this target group and create an agreement on integrated care. The relevance of a digital communication and collaboration platform is high. The regional healthcare network should support the collaboration between care providers by: 1. Offering a communication platform to replace the time consuming communication by telephone; 2. Making patient information available for patient and care provider at patients' homes; 3. Giving insight in who is giving what care to whom; and 4. Giving access to knowledge about the target group: elderly and psychiatric patients living independently.
Energy Technology Data Exchange (ETDEWEB)
NONE
1999-03-01
An artificial mutation/selection system was constructed in a laboratory based on molecular-level findings collected about the biological evolution mechanism, and biotechnology was studied for creating excellent biological functions. In the study of novel mutation generating technologies, selection is performed after the formation of numerous chimera enzymes by a family shuffling process using resistance to heat as the index. Then, a hybrid enzyme with its resistance to heat more than 10 times higher than that of the parent enzyme was obtained. In the study of establishing coordination between genotype and phenotype, a highly sensitive bacterial coordination technology was developed, and a highly sensitive detection method was constructed using a flow cytometer. As for technologies of highly efficient selection, a research was conducted about the selection of catalytic antibodies equipped with protease and esterase activity. In the study of technologies for enhancing adaptive walk in an evolution experimenting system, the usefulness is studied of a terrain survey based on the adaptive walk theory and a high-efficiency adaptive walk method using the mutation scrambling method. (NEDO)
DEFF Research Database (Denmark)
Bjerglund Pedersen, Emil; Kongsfelt, Mikkel; Shimizu, Kyoko
2014-01-01
An electrochemical approach is introduced for the versatile carboxylation of multi-layered graphene in 0.1 M Bu4NBF4/MeCN. First, the graphene substrate (i.e., graphene chemically vapor-deposited on Ni) is negatively charged at -1.9 V versus Ag/AgI in a degassed solution to allow for intercalation...... of Bu4N+ and, thereby, separation of the individual graphene sheets. In the next step, the strongly activated and nucleophilic graphene is allowed to react with added carbon dioxide in an addition reaction, introducing carboxylate groups stabilized by Bu4N+ already present. This procedure may be carried...... solution at the graphene electrode for a given time. The same functionalization degree is obtained for all multi-layered regions, independent of the number of graphene sheets, which is due to the fact that the entire graphene structure is opened in response to the intercalation of Bu4N+. Hence...
Retreating academics: creating spaces for the scholarship of ...
African Journals Online (AJOL)
, this paper explores particular spaces created to support academic engagement in the scholarship of teaching and learning: the space of writing retreats. The metaphor of 'tapestry' is used to capture the development of a complex conceptual ...
Creating an adaptive healing room for neurology patients
Daemen, E.M.L; Behere, S.; Cuppen, R.P.G.; Facey, J.; Flinsenberg, I.C.M.; Loenen, van E.J.; Rajae-Joordens, R.J.E.
2013-01-01
Informed by the experiences of patients and medical staff, Philips has designed a room for neurology patients that retains a clinical feel when treatment is being carried out, but can flex to create a moretailored, personal ambiende.
Create 2D mobile games with Corona SDK for iOS and Android
Mekersa, David
2015-01-01
Corona SDK is one of the most powerful tools used to create games and apps for mobile devices.The market requires speed; new developers need to operate quickly and efficiently. Create 2D Mobile Games with Corona SDK gives you the tools needed to master Corona - even within the framework of professional constraints. A must-read guide, this book gives you fast, accurate tips to learn the programming language necessary to create games. Read it sequentially or as an FAQ and you will have the tools you need to create any base game before moving on to advanced topics. The tutorial-based format:Conta
Creating Flash advertising from concept to tracking-microsites, video ads and more
Fincanon, Jason
2007-01-01
Create awe-inspiring, mind-blowing Flash ads and microsites that engage consumers and demonstrate their worth to clients. The Hands-On Guide to Creating Flash Advertising delivers the nuts and bolts of the development process from initial design conception to ad completion. You'll learn the best practices for:* Mastering the myriad of ad specs, deadlines, quality and version control issues* Creating ads that balance campaign goals with design constraints* Preparing and building ads with team and QC standards* Using forms and data in ads without file bloat* File optimization techniques for swf
MatLab Script and Functional Programming
Shaykhian, Gholam Ali
2007-01-01
MatLab Script and Functional Programming: MatLab is one of the most widely used very high level programming languages for scientific and engineering computations. It is very user-friendly and needs practically no formal programming knowledge. Presented here are MatLab programming aspects and not just the MatLab commands for scientists and engineers who do not have formal programming training and also have no significant time to spare for learning programming to solve their real world problems. Specifically provided are programs for visualization. The MatLab seminar covers the functional and script programming aspect of MatLab language. Specific expectations are: a) Recognize MatLab commands, script and function. b) Create, and run a MatLab function. c) Read, recognize, and describe MatLab syntax. d) Recognize decisions, loops and matrix operators. e) Evaluate scope among multiple files, and multiple functions within a file. f) Declare, define and use scalar variables, vectors and matrices.
DEFF Research Database (Denmark)
Petersen, Jesper; Poulsen, Lena; Birgens, Henrik
2009-01-01
microfluidic device that creates a gradient comprising zones of defined ionic strength over a glass slide, in which each zone corresponds to a subarray. Using this device, we demonstrated that ionic strength gradients function in a similar fashion as corresponding thermal gradients in assay development. More...... specifically, we noted that (i) the two stringency modulators generated melting curves that could be compared, (ii) both led to increased assay robustness, and (iii) both were associated with difficulties in genotyping the same mutation. These findings demonstrate that ionic strength stringency buffers can...
Full Text Available ... Sign Up Thank you for signing up ' + ' '); $('.survey-form').show(); }, success: function (data) { $('#survey-errors').remove(); $('.survey-form .form-group .survey-alert-wrap').remove(); if (data. ...
Creating Objects and Object Categories for Studying Perception and Perceptual Learning
Hauffen, Karin; Bart, Eugene; Brady, Mark; Kersten, Daniel; Hegdé, Jay
2012-01-01
In order to quantitatively study object perception, be it perception by biological systems or by machines, one needs to create objects and object categories with precisely definable, preferably naturalistic, properties1. Furthermore, for studies on perceptual learning, it is useful to create novel objects and object categories (or object classes) with such properties2. Many innovative and useful methods currently exist for creating novel objects and object categories3-6 (also see refs. 7,8). However, generally speaking, the existing methods have three broad types of shortcomings. First, shape variations are generally imposed by the experimenter5,9,10, and may therefore be different from the variability in natural categories, and optimized for a particular recognition algorithm. It would be desirable to have the variations arise independently of the externally imposed constraints. Second, the existing methods have difficulty capturing the shape complexity of natural objects11-13. If the goal is to study natural object perception, it is desirable for objects and object categories to be naturalistic, so as to avoid possible confounds and special cases. Third, it is generally hard to quantitatively measure the available information in the stimuli created by conventional methods. It would be desirable to create objects and object categories where the available information can be precisely measured and, where necessary, systematically manipulated (or 'tuned'). This allows one to formulate the underlying object recognition tasks in quantitative terms. Here we describe a set of algorithms, or methods, that meet all three of the above criteria. Virtual morphogenesis (VM) creates novel, naturalistic virtual 3-D objects called 'digital embryos' by simulating the biological process of embryogenesis14. Virtual phylogenesis (VP) creates novel, naturalistic object categories by simulating the evolutionary process of natural selection9,12,13. Objects and object categories created
Creating Ribo-T: (Design, Build, Test)n.
Carlson, Erik D
2015-11-20
Engineering biology is especially challenging given our relatively poor ability to rationally design within life's complex design landscape. Thus, moving through the engineering "design, build, test" cycle multiple times accumulates system knowledge and hopefully yields a successful design. Here I discuss the engineering process behind our recently published work creating a ribosome with tethered subunits, Ribo-T.
Generative design visualize, program, and create with processing
Bohnacker, Hartmut; Laub, Julia; Lazzeroni, Claudius
2012-01-01
Generative design is a revolutionary new method of creating artwork, models, and animations from sets of rules, or algorithms. By using accessible programming languages such as Processing, artists and designers are producing extravagant, crystalline structures that can form the basis of anything from patterned textiles and typography to lighting, scientific diagrams, sculptures, films, and even fantastical buildings. Opening with a gallery of thirty-five illustrated case studies, Generative Design takes users through specific, practical instructions on how to create their own visual experiments by combining simple-to-use programming codes with basic design principles. A detailed handbook of advanced strategies provides visual artists with all the tools to achieve proficiency. Both a how-to manual and a showcase for recent work in this exciting new field, Generative Design is the definitive study and reference book that designers have been waiting for.
Creating Simple Windchill Admin Tools Using Info*Engine
Jones, Corey; Kapatos, Dennis; Skradski, Cory
2012-01-01
Being a Windchill administrator often requires performing simple yet repetitive tasks on large sets of objects. These can include renaming, deleting, checking in, undoing checkout, and much more. This is especially true during a migration. Fortunately, PTC has provided a simple way to dynamically interact with Windchill using Info*Engine. This presentation will describe how to create simple Info*Engine tasks capable of saving Windchill 10.0 administrators hours of tedious work. It will also show how these tasks can be combined and displayed on a simple JSP page that acts as a "Windchill Administrator Dashboard/Toolbox". The attendee will learn some valuable tasks Info*Engine capable of performing. The attendee will gain a basic understanding of how to perform and implement Info*Engine tasks. The attendee will learn what's involved in creating a JSP page that displays Info*Engine tasks
International Nuclear Information System (INIS)
Sinclair, Kathleen A.; Xie Qun; Mitchell, Carl P.J.
2012-01-01
Thousands of hectares of wetlands are created annually because wetlands provide beneficial ecosystem services. Wetlands are also key sites for production of the bioaccumulative neurotoxin methylmercury (MeHg), but little is known about MeHg production in created systems. Here, we studied methylmercury in sediment, water, and invertebrates in created wetlands of various ages. Sediment MeHg reached 8 ng g −1 in the newest wetland, which was significantly greater than in natural, control wetlands. This trend was mirrored in several invertebrate taxa, whose concentrations reached as high as 1.6 μg g −1 in the newest wetland, above levels thought to affect reproduction in birds. The MeHg concentrations in created wetland invertebrate taxa generally decreased with increasing wetland age, possibly due to a combination of deeper anoxia and less organic matter accumulation in younger wetlands. A short-term management intervention and/or improved engineering design may be necessary to reduce the mercury-associated risk in newly created wetlands. - Highlights: ► Investigated methylmercury accumulation in created wetland ecosystems. ► Concentrations and bioaccumulation significantly elevated in new created wetlands. ► Short-term effect may be due to deeper anoxia, less organic matter in new wetlands. ► Intervention or improved design required to reduce short-term ecological risk. - Sediment methylmercury concentrations and bioaccumulation in many invertebrate taxa are significantly elevated in newly created wetlands.
Creating Healthier, More Equitable Communities By Improving Governance And Policy.
Dubowitz, Tamara; Orleans, Tracy; Nelson, Christopher; May, Linnea Warren; Sloan, Jennifer C; Chandra, Anita
2016-11-01
How can healthier, more equitable communities be created? This is a key question for public health. Even though progress has been made in understanding the impact of social, physical, and policy factors on population health, there is much room for improvement. With this in mind, the Robert Wood Johnson Foundation made creating healthier, more equitable communities the third of four Action Areas in its Culture of Health Action Framework. This Action Area focuses on the interplay of three drivers-the physical environment, social and economic conditions, and policy and governance-in influencing health equity. In this article we review some of the policy and governance challenges confronting decisionmakers as they seek to create healthy communities on a broad scale. We use these challenges as a framework for understanding where the most critical gaps still exist, where the links could be exploited more effectively, and where there are opportunities for further research and policy development. Project HOPE—The People-to-People Health Foundation, Inc.
Control of invasive plant species in created wetlands.
1994-01-01
The Virginia Department of Transportation (VDOT) has been using a herbicide in the form of glyphosate for the control of unwanted species in created wetlands. Results with this particular herbicide have been somewhat mixed. It was requested that the ...
Analysis and prediction of the alpha-function parameters used in cubic equations of state
DEFF Research Database (Denmark)
Privata, Romain; Viscontea, Maxime; Zazoua-Khames, Anis
2015-01-01
and compared regarding their ability to reproduce vapor pressure, heat of vaporization, liquid heat capacity, liquid density and second virial coefficient data. To reach this objective, extensive databanks of alpha function parameters were created. In particular, pitfalls of Twu-type alpha functions were...
Covalent functionalization of carbon nanotubes with tetramanganese complexes
International Nuclear Information System (INIS)
Meyer, Carola; Frielinghaus, Robert; Saelhoff, Anna-Katharina; Schneider, Claus M.; Besson, Claire; Floetotto, Henrik; Koegerler, Paul; Houben, Lothar
2012-01-01
We present first results on the covalent chemical functionalization of single-walled carbon nanotubes with polynuclear {Mn 4 } coordination complexes. Raman spectra prove that the reaction can only be achieved for tubes which have been oxidized to create carboxylic groups. HRTEM is used to show that the reaction can be carried out directly on a substrate as well. Analysis of the D/G intensity ratio for different oxidation times shows that it is possible to reduce the amount of defects created. This is important for the future application of this material in transport devices. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)
CREATING AND EVALUATING SUSTAINABLE BUSINESS MODELS – A CROSS-INDUSTRY CASE STUDY
DEFF Research Database (Denmark)
Aagaard, Annabeth
of understanding, creating and evaluating businesses and their business models. The objective of this article is to explore how sustainable business models can be created and evaluated across different companies and industrial contexts. Although many authors have stressed the business potentials of sustainable...
Directory of Open Access Journals (Sweden)
BAMBANG PUJIASMANTO
2007-07-01
Full Text Available This research is to learn the creat potention for cultivated as medical material producer plant. So that, the limited creat as medical material not occur. The method of research which used is survey. The survai include identification and creat distribution pattern. There was used vegetative analysis with quadrat method. The research result showed that 1 in creat habitat find out 11 species of tree, 20 species herba (include creat, and 16 species grasses, 2 The highest of importance value indeks Tectona grandis L. (tree group, Andrographis paniculata Ness (herb group, and Portulaca oleraceae L. (grasses group, 3 Distribution pattern of creat is clumped, and the herb others is uniform, 4 The creat growth on the common under shading Tectona grandis L. tree. The results of this research are domestication concept and theories which to basic the cultivated technology packet of creat wild plant which the statue increased be medical material produce crop. In the next ,expected can used for get conclusion policy of medical crop and planning, especially on creat propertion of creat medical material.
A Place to Call Home: Amphibian Use of Created and Restored Wetlands
Directory of Open Access Journals (Sweden)
Donald J. Brown
2012-01-01
Full Text Available Loss and degradation of wetland habitats are major contributing factors to the global decline of amphibians. Creation and restoration of wetlands could be a valuable tool for increasing local amphibian species richness and abundance. We synthesized the peer-reviewed literature addressing amphibian use of created and restored wetlands, focusing on aquatic habitat, upland habitat, and wetland connectivity and configuration. Amphibian species richness or abundance at created and restored wetlands was either similar to or greater than reference wetlands in 89% of studies. Use of created and restored wetlands by individual species was driven by aquatic and terrestrial habitat preferences, as well as ability to disperse from source wetlands. We conclude that creating and restoring wetlands can be valuable tools for amphibian conservation. However, the ecological needs and preferences of target species must be considered to maximize the potential for successful colonization and long-term persistence.
Creating Life in an Urban Space
Fredrickson, Kirsten I.
1999-01-01
Creating Life in an Urban Space Kirsten Fredrickson Abstract Towns contain spaces defined by human interaction with their surroundings. In any town, certain places seem inviting while others seem cold and unfriendly. This is the result of subtle design decisions that directly effect the character of a place. This investigation focuses on the interaction of architecture in our daily lives and how it affects us in ways that we often overlook. The life of a town is in its rela...
Indicators of ecosystem function identify alternate states in the sagebrush steppe.
Kachergis, Emily; Rocca, Monique E; Fernandez-Gimenez, Maria E
2011-10-01
Models of ecosystem change that incorporate nonlinear dynamics and thresholds, such as state-and-transition models (STMs), are increasingly popular tools for land management decision-making. However, few models are based on systematic collection and documentation of ecological data, and of these, most rely solely on structural indicators (species composition) to identify states and transitions. As STMs are adopted as an assessment framework throughout the United States, finding effective and efficient ways to create data-driven models that integrate ecosystem function and structure is vital. This study aims to (1) evaluate the utility of functional indicators (indicators of rangeland health, IRH) as proxies for more difficult ecosystem function measurements and (2) create a data-driven STM for the sagebrush steppe of Colorado, USA, that incorporates both ecosystem structure and function. We sampled soils, plant communities, and IRH at 41 plots with similar clayey soils but different site histories to identify potential states and infer the effects of management practices and disturbances on transitions. We found that many IRH were correlated with quantitative measures of functional indicators, suggesting that the IRH can be used to approximate ecosystem function. In addition to a reference state that functions as expected for this soil type, we identified four biotically and functionally distinct potential states, consistent with the theoretical concept of alternate states. Three potential states were related to management practices (chemical and mechanical shrub treatments and seeding history) while one was related only to ecosystem processes (erosion). IRH and potential states were also related to environmental variation (slope, soil texture), suggesting that there are environmental factors within areas with similar soils that affect ecosystem dynamics and should be noted within STMs. Our approach generated an objective, data-driven model of ecosystem dynamics
Combine To Create Size or Growing From Small To Big?
Gan, Thian Han
2013-01-01
Many companies seek to acquire or merge to grow. Size has always been the underlying rationale for mergers and acquisitions (“M&A”) as the creation of larger entities will purportedly increase the capacity of the entities hence allowing them to take advantage of economies of scale and scope. Another reason for M&A is to create a “portfolio of core competences” by combining and exploiting the core competences of the two entities to create synergy and to enhance the competitive edge for the enl...
Creating Collaborative Third-space Discourse to Address Contradictions in Coteaching
Directory of Open Access Journals (Sweden)
Ed Lehner
2006-09-01
Full Text Available This article examines how coteaching can be wrought with contradictions without employing its recursive counterpart, cogenerative dialogue. To help avoid dualistic tendencies while coteaching, participants can use cogenerative dialogue to help create collaborative third-space discourse where plans of cooperative action can be cogenerated. This work also shares how the extension of the cosmopolitan ethic can be used in tandem with one-on-one cogenerative dialogues to navigate ideological differences in coteachers and create fruitful working partnerships. URN: urn:nbn:de:0114-fqs0604198
Investing in Health to Create a Third Demographic Dividend.
Fried, Linda P
2016-04-01
The world is aging as a result of unprecedented successes worldwide adding 30 years of life expectancy and presenting great opportunities for all of society, but only if we invest effectively. This article, written as a requested background article for the World Health Organization 2015 World Report on Aging, proposes that creating health into the oldest ages could lay the basis for a third demographic dividend resulting from the societal benefits from the generative social capital of older adults, on top of the second demographic dividend's savings associated with longer lives. The combination would contribute to stronger and wealthier societies, greater success of the young, and increased societal ability to provide the humane supports needed at the end of life, plus a dividend that would endure. We now know that prevention works at every age and into the oldest ages. A life-course approach to prevention and health promotion is the key investment. The creation of geriatrically knowledgeable and integrated public health, medical and social care systems has the potential to amplify capabilities and well-being to the end of life. Healthy older populations bring both desire for engagement and unique talents. Institutions designed to create impactful roles for older adults to contribute to the success of the young can activate the societal benefits and further enhance health at older ages. Creating a new vision for the opportunities of an older age is the first critical step toward experiencing the benefits of our longer lives and creating a sustained third demographic dividend. © The Author 2016. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.
Determination of saturation functions and wettability for chalk based on measured fluid saturations
Energy Technology Data Exchange (ETDEWEB)
Olsen, D.; Bech, N.; Moeller Nielsen, C.
1998-08-01
The end effect of displacement experiments on low permeable porous media is used for determination of relative permeability functions and capillary pressure functions. Saturation functions for a drainage process are determined from a primary drainage experiment. A reversal of the flooding direction creates an intrinsic imbibition process in the sample, which enables determination if imbibition saturation functions. The saturation functions are determined by a parameter estimation technique. Scanning effects are modelled by the method of Killough. Saturation profiles are determined by NMR. (au)
Creating a streaming video collection for your library
Duncan, Cheryl J
2014-01-01
Creating a Streaming Video Collection for Your Library covers the main processes associated with streaming video, from licensing to access and evaluation, and will serve as a key reference and source of best practices for libraries adding streaming video titles to their collections.
Situation Creator: A Pedagogical Agent Creating Learning Opportunities
Miao, Yongwu; Hoppe, Ulrich; Pinkwart, Niels
2007-01-01
Miao, Y., Hoppe, H. U., & Pinkwart, N. (2007). Situation Creator: A Pedagogical Agent Creating Learning Opportunities. In R. Luckin, K. Koedinger & J. Greer (Eds.), Proceedings of the 13th International Conference on Artificial Intelligence in Education (pp. 614-617). Amsterdam, The Netherlands: IOS
Full Text Available ... for signing up ' + ' '); $('.survey-form').show(); }, success: function (data) { $('#survey-errors').remove(); $('.survey-form .form-group .survey-alert-wrap').remove(); if (data.submitSurveyResponse.success == 'false') { $('.survey-form').prepend(' ' + ' ' + 'There was ...
Creating a Curriculum for Training Health Profession Faculty Leaders
National Research Council Canada - National Science Library
Mitchell, Pamela H; Robins, Lynne S; Schaad, Dotiglas
2005-01-01
Objectives: An interprofessional, collaborative group of educators, patient safety officers, and Federal program directors teamed up to create an integrated, patient safety-centered curriculum for the education...
How Real Detector Thresholds Create False Standard Candles
International Nuclear Information System (INIS)
Shahmoradi, Amir; Nemiroff, Robert
2009-01-01
GRB satellites are relatively inefficient detectors of dim hard bursts. For example, given two bursts of identical peak luminosity near the detection threshold, a dim soft burst will be preferentially detected over a dim hard burst. This means that a high E peak burst will need a higher peak luminosity to be detected than a low E peak GRB. This purely detector-created attribute will appear as a correlation between E peak and luminosity, and should not be interpreted as a real standard candle effect. This result derives from Monte Carlo simulations utilizing a wide range of initial GRB spectra, and retriggering to create a final ''detected'' sample. In sum, E peak is not a good standard candle, and its appearance as such in seeming correlations such as the Amati and other L iso vs. E peak relations is likely a ghost of real energy-related detection thresholds.
Nurses and Lifelong Learning: Creating "Makers and Shapers" or "Users and Choosers"?
Butcher, Diane; Bruce, Anne
2016-04-01
How have the meaning and goals of lifelong learning for nurses shifted under neoliberal political policy? This article critically scrutinizes the political undercurrents of lifelong learning. While the original intent of lifelong learning was to foster intellectual, critical, social, and political citizen engagement (creating "makers and shapers" of social policy), instrumental learning-learning to meet practical economic ends-has taken priority and is instead creating marketable workers (creating "users and choosers"). International educational neoliberal policy reform has altered the very nature of education. Under pervasive neoliberal political influence, lifelong learning has become distorted as the goals of learning have shifted towards creating marketable workers who are expected, while unsupported, to engage in learning to ensure ongoing employability in an open market. By examining new understandings of lifelong learning, nurses can make informed choices as to whether they aspire to be a "user and chooser" or "maker and shaper" of lifelong learning in their workplaces. © 2015 Wiley Periodicals, Inc.
The Functional Genomics Initiative at Oak Ridge National Laboratory
Energy Technology Data Exchange (ETDEWEB)
Johnson, Dabney; Justice, Monica; Beattle, Ken; Buchanan, Michelle; Ramsey, Michael; Ramsey, Rose; Paulus, Michael; Ericson, Nance; Allison, David; Kress, Reid; Mural, Richard; Uberbacher, Ed; Mann, Reinhold
1997-12-31
The Functional Genomics Initiative at the Oak Ridge National Laboratory integrates outstanding capabilities in mouse genetics, bioinformatics, and instrumentation. The 50 year investment by the DOE in mouse genetics/mutagenesis has created a one-of-a-kind resource for generating mutations and understanding their biological consequences. It is generally accepted that, through the mouse as a surrogate for human biology, we will come to understand the function of human genes. In addition to this world class program in mammalian genetics, ORNL has also been a world leader in developing bioinformatics tools for the analysis, management and visualization of genomic data. Combining this expertise with new instrumentation technologies will provide a unique capability to understand the consequences of mutations in the mouse at both the organism and molecular levels. The goal of the Functional Genomics Initiative is to develop the technology and methodology necessary to understand gene function on a genomic scale and apply these technologies to megabase regions of the human genome. The effort is scoped so as to create an effective and powerful resource for functional genomics. ORNL is partnering with the Joint Genome Institute and other large scale sequencing centers to sequence several multimegabase regions of both human and mouse genomic DNA, to identify all the genes in these regions, and to conduct fundamental surveys to examine gene function at the molecular and organism level. The Initiative is designed to be a pilot for larger scale deployment in the post-genome era. Technologies will be applied to the examination of gene expression and regulation, metabolism, gene networks, physiology and development.
Creating an effective poster presentation.
Taggart, H M; Arslanian, C
2000-01-01
One way to build knowledge in nursing is to share research findings or clinical program outcomes. The dissemination of these findings is often a difficult final step in a project that has taken months or years to complete. One method of sharing findings in a relaxed and informal setting is a poster presentation. This method is an effective form for presenting findings using an interactive approach. The milieu of a poster presentation enables the presenters to interact and dialogue with colleagues. Guidelines for size and format require that the poster is clear and informative. Application of design helps to create visually appealing posters. This article summarizes elements of designing and conducting a poster presentation.
Creating and probing coherent atomic states
Energy Technology Data Exchange (ETDEWEB)
Reinhold, C.O.; Burgdoerfer, J. [Oak Ridge National Lab., TN (United States). Physics Div.]|[Univ. of Tennessee, Knoxville, TN (United States). Dept. of Physics and Astronomy; Frey, M.T.; Dunning, F.B. [Rice Univ., Houston, TX (United States)
1997-06-01
The authors present a brief review of recent experimental and theoretical time resolved studies of the evolution of atomic wavepackets. In particular, wavepackets comprising a superposition of very-high-lying Rydberg states which are created either using a short half-cycle pulse (HCP) or by rapid application of a DC field. The properties of the wavepackets are probed using a second HCP that is applied following a variable time delay and ionizes a fraction of the atoms, much like a passing-by ion in atomic collisions.
Enrichment of African catfish with functional selenium originating from garlic
Schram, E.; Pedrero, Z.; Camara, C.; Heul, van der J.W.; Luten, J.B.
2008-01-01
We wanted to create functional seafood with high concentrations of organic selenium (seleno-methyl-selenocysteine and ¿-glutamyl-seleno-methyl-selenocysteine) with anti-carcinogenic properties for human consumers. Garlic containing high concentrations of these organic selenium compounds was used as
Full Text Available ... Are Research Leaders World's Largest Diabetes Meeting Recent Advances Type 1 Research Highlights Research Excellence Honorees How ... you for signing up ' + ' '); $('.survey-form').show(); }, success: function (data) { $('#survey-errors').remove(); $('.survey-form .form-group . ...
Between Discomfort and Comfort: Towards Language That Creates Space for Social Change
Schultz, Christie
2017-01-01
This paper examines the potential of the term "settler ally" to create productive discomfort alongside productive comfort, thereby creating space for positive social change. The setting in which the term is examined is Canada--Alberta in particular--following the release of the recommendations of the Truth and Reconciliation Commission…
Creating a climate for business success | IDRC - International ...
International Development Research Centre (IDRC) Digital Library (Canada)
2014-04-10
Apr 10, 2014 ... Despite its persistent development challenges, Africa has some of ... Entrepreneurship has deep roots, but a number of barriers restrain private sector development. Many African economies are small and fragmented, having limited ... Supportive policies are needed to create a healthy business environment
Full Text Available ... up ' + ' '); $('.survey-form').show(); }, success: function (data) { $('#survey-errors').remove(); $('.survey-form .form-group .survey-alert-wrap'). ... success == 'false') { $('.survey-form').prepend(' ' + ' ' + 'There was an error with your submission. Please try again.' + ' ' + ' '); var surveyErrors = ...
Full Text Available ... Risk Healthy Eating Overweight Smoking High Blood Pressure Physical Activity High Blood Glucose My Health Advisor Tools To ... Email: Sign Up Thank you for signing up ' + ' '); $('.survey-form').show(); }, success: function (data) { $('#survey-errors').remove(); $('. ...
Study on the morphology and agroecology of creat (Andrographis panculata ness. in various habitat
Directory of Open Access Journals (Sweden)
BAMBANG PUJIASMANTO
2007-10-01
Full Text Available Raw material supply which still depends on nature has caused genetic erotion of medicinal plants. The objectives of the research were to study creat (Andrographis paniculata Ness. morphology; and agroecology in many habitat for cultivated be medical substance. The research were conducted at three different locations, ie. at lowland ( 700 m asl.. The result showed that creat growth on 180 m – 861 m above sea level with environmental conditions : temperature 20.320C – 26.930C, relative humidity 78% - 87%, perticipation 2053.2 mm/ year – 3555.6 mm/ year. The creat can growth on soil mineral that contains N medium, P low, K medium, Mg low, Ca verylow until low ,C organic low until medium, and pH less acid until acid. The heihgt plant of creat in middleland is the highest of in lowland and upland, that also leaf of creat. The flower, fruit, and root of creat as good as in the habitat various. The highest andrographolid contain in middleland (2.27%, whereas in lowland (1.37% and upland (0.89%.
THE DEVELOPMENT OF A TRANSACTIONAL ANALYSIS PSYCHOMETRIC TOOL FOR ENHANCING FUNCTIONAL FLUENCY
TEMPLE, SUSANNAH FLEUR
2002-01-01
Functional Fluency denotes efficacy of interpersonal functioning in terms of flexibility and balance of the behavioural modes a person uses. The aim of this project is to design and create a psychometric tool for mapping the patterns of such functioning. The intention is that feedback on the test results will stimulate the insights and understanding to support and encourage positive behavioural change. This process, involving the development of self-awareness, which is a key as...
Full Text Available ... our 2018 Tour de Cure events. Start your team today! More from diabetes.org Healthy Recipes: Delicious ... function (data) { $('#survey-errors').remove(); $('.survey-form .form-group .survey-alert-wrap').remove(); if (data.submitSurveyResponse.success == ' ...
Created in the image of God and sexuality in early-Jewish writings
Directory of Open Access Journals (Sweden)
Ernest Van Eck
2017-09-01
Full Text Available This article pays tribute to the contribution made by Yolanda Dreyer regarding critique on the prevalence of patriarchy in society, as well as her defence of homosexuality as a normal sexual orientation. Taking as point of departure her work on the woman as created in God’s image, it is argued that understanding the metaphor ‘created in God’s image’ as referring to rule over all, and not as created as man and woman, has important implications for the relationship between man and woman, as well as the normalisation of relationships between the same sex.
Education as a Commodity: Who Owns the Online Content Your Teachers Create?
Axelson, Mary
2001-01-01
As the Internet becomes increasingly commercialized, the K-12 world will need to follow higher education's lead and define who owns a wealth of instructional information. Some companies are actively seeking to purchase teacher-created work. Teachers generally own what they create, but district policies should be in place. (MLH)
A new technique for creating a neo-umbilicus in abdominoplasty.
Martinez-Teixido, L; Serra-Mestre, J M; Serra-Renom, J M
2017-12-01
The umbilicus is an essential feature of the abdomen. In this article, we describe a new technique for creating a neo-umbilicus in abdominoplasty. Thirty consecutive women underwent abdominoplasty with our new technique for recreating the navel. The new navel is created at the midpoint between the xiphoid process and pubic symphysis by defatting a cylinder of fat tissue as far as the dermis that is then sutured to the rectus muscle to enable it to "take" in the same way as a total skin graft and form a hollow, which will be the new navel. Patients were divided into three groups according to BMI (group A create periumbilical scarring, and it can be used in cases in which the original pedicle and vascularization of the navel cannot be preserved. It appears to achieve good aesthetic results and high levels of satisfaction among patients; however, it is less effective in very thin patients whose navel remains flat due to the lack of adipose tissue. Copyright © 2017 British Association of Plastic, Reconstructive and Aesthetic Surgeons. Published by Elsevier Ltd. All rights reserved.
Creating, generating and comparing random network models with NetworkRandomizer.
Tosadori, Gabriele; Bestvina, Ivan; Spoto, Fausto; Laudanna, Carlo; Scardoni, Giovanni
2016-01-01
Biological networks are becoming a fundamental tool for the investigation of high-throughput data in several fields of biology and biotechnology. With the increasing amount of information, network-based models are gaining more and more interest and new techniques are required in order to mine the information and to validate the results. To fill the validation gap we present an app, for the Cytoscape platform, which aims at creating randomised networks and randomising existing, real networks. Since there is a lack of tools that allow performing such operations, our app aims at enabling researchers to exploit different, well known random network models that could be used as a benchmark for validating real, biological datasets. We also propose a novel methodology for creating random weighted networks, i.e. the multiplication algorithm, starting from real, quantitative data. Finally, the app provides a statistical tool that compares real versus randomly computed attributes, in order to validate the numerical findings. In summary, our app aims at creating a standardised methodology for the validation of the results in the context of the Cytoscape platform.
Creating the next generation control system software
International Nuclear Information System (INIS)
Schultz, D.E.
1989-01-01
A new 1980's style support package for future accelerator control systems is proposed. It provides a way to create accelerator applications software without traditional programming. Visual Interactive Applications (VIA) is designed to meet the needs of expanded accelerator complexes in a more cost effective way than past experience with procedural languages by using technology from the personal computer and artificial intelligence communities. 4 refs
Full Text Available ... errors); $.each(surveyErrors, function () { if (this.errorField) { $('input[name="' + this.errorField + '"]').closest('.form-group') .prepend(' ' + ' ' + this.errorMessage + ' ' + ' '); } }); $('. ... News & Events The Cost of Diabetes Advocate Toolkit Call to Congress Research & Practice We Are Research Leaders ...
Scale-up of nature’s tissue weaving algorithms to engineer advanced functional materials
Ng, Joanna L.; Knothe, Lillian E.; Whan, Renee M.; Knothe, Ulf; Tate, Melissa L. Knothe
2017-01-01
We are literally the stuff from which our tissue fabrics and their fibers are woven and spun. The arrangement of collagen, elastin and other structural proteins in space and time embodies our tissues and organs with amazing resilience and multifunctional smart properties. For example, the periosteum, a soft tissue sleeve that envelops all nonarticular bony surfaces of the body, comprises an inherently “smart” material that gives hard bones added strength under high impact loads. Yet a paucity of scalable bottom-up approaches stymies the harnessing of smart tissues’ biological, mechanical and organizational detail to create advanced functional materials. Here, a novel approach is established to scale up the multidimensional fiber patterns of natural soft tissue weaves for rapid prototyping of advanced functional materials. First second harmonic generation and two-photon excitation microscopy is used to map the microscopic three-dimensional (3D) alignment, composition and distribution of the collagen and elastin fibers of periosteum, the soft tissue sheath bounding all nonarticular bone surfaces in our bodies. Then, using engineering rendering software to scale up this natural tissue fabric, as well as multidimensional weaving algorithms, macroscopic tissue prototypes are created using a computer-controlled jacquard loom. The capacity to prototype scaled up architectures of natural fabrics provides a new avenue to create advanced functional materials.
Energy Technology Data Exchange (ETDEWEB)
NONE
2000-03-01
With an aim at structuring an advancement experimental system that can introduce high-level functions efficiently, development was made on a technology to create new type high-function enzymes. This paper summarizes the achievements in fiscal 1999. In the research of a mutation generating technology, application of the DNA shuffling technology was attempted onto phenol hydroxide enzymes and 2,3-dihydroxybiphenyl 1,2-oxygen added enzymes to discuss the possibility of decomposition of trichloroethylene and decomposition of PCB. In the research of a technology to provide gene type and expression type correspondence, improvement in the vector was studied to increase manifestation of motifs onto bacteria surface so that high-sensitivity detection may be made even on a very small amount of a substance. In the research of an efficient selection technology, studies were made on the catalytic function selecting system and the information function selecting system. In the research of an adaptive walking technology, studies were made on REP, LOD, the advancement experimental system using interaction between proteins as the adaptability, and the multi-dimensional adaptive walking technology. In comprehensive surveys and studies, technological information was exchanged, and discussion meetings were held. (NEDO)
The Ties that Bind: Creating Great Customer Service.
Lisker, Peter
2000-01-01
Offers suggestions for libraries on how to develop a customer service plan to provide excellent service, create a positive environment for staff members, foster new and continued positive relationships with patrons, and evaluate customer service goals and objectives. Also discusses policies and building appearance. (Author/LRW)
Affective ambiences created with lighting for older people
Kuijsters, A.; Redi, J.; Ruyter, B.E.R. de; Seuntiens, P.; Heynderickx, I.
2015-01-01
Current lighting technologies provide huge flexibility in creating ambiences that may be adapted to the needs of an occupant in a room. These ambiences not only satisfy visual needs, but may also improve people’s well-being. This paper describes one possible application of adaptable light ambiences,
Creating a Structured Support System for Postsecondary Success
White, Carol Cutler
2018-01-01
For numerous reasons, it can be difficult for foster youth to succeed in postsecondary education. This chapter offers insight into state-level policies and programs, community college programs dedicating to supporting foster youth, and a framework for creating a structured support system to increase student success.
Creating an International Network of Democracy Builders | IDRC ...
International Development Research Centre (IDRC) Digital Library (Canada)
Creating an International Network of Democracy Builders. The Centre for the Study of Democracy (CSD) at Queen's University will conduct three case studies on democratic transition in Liberia, Costa Rica and Palestine, partnering with the Sua Foundation, the Arias Foundation and the Arab Thought Forum, respectively.
Creating An Alternative Design for Asita Corporate Identity
Directory of Open Access Journals (Sweden)
Michelle Elise
2015-10-01
Full Text Available The objective of the study is to find the solution to the problem outlined, which is to create an alternative design for corporate identity of ASITA. ASITA is a non-profit organization to foster tours and travel agencies in Indonesia. The writer conducted interview to the ASITA Jakarta Chapter, which was appointed to represent ASITA in providing the data needed by the writer. The writer interviewed the advisor of the organization, which had once served as chairperson of ASITA. The result of the research is new corporate identity system of ASITA based on a concept that ASITA as an organization, serves as a compass that guides and assists in every direction. The writer found that corporate identity is an important element to define an organization as well as giving impact on its first impression. To create good corporate identity, several things such as elements of design, color, typography, etc need to be put into attention.
Beyond Diversity and Inclusion: Creating a Social Justice Agenda in the Classroom
Lerner, Justin E.; Fulambarker, Anjali
2018-01-01
A social justice classroom agenda relies on the ability of educators to create a space free from microaggressions that can be strengthened through an approach of cultural humility. Utilizing Bonnycastle's social justice continuum, this article explores how to create a classroom grounded in social equality and guided by social work values to foster…
Creating Opportunity for Families: A Two-Generation Approach. KIDS COUNT Policy Report
Gencer, Arin
2014-01-01
Nearly half of the nation's families with young children struggle to make ends meet. A new KIDS COUNT policy report makes the case for creating opportunity for families by addressing the needs of parents and their children simultaneously. "Creating Opportunity for Families: A Two-Generation Approach" describes a new approach to reducing…
Full Text Available ... errors); $.each(surveyErrors, function () { if (this.errorField) { $('input[name="' + this.errorField + '"]').closest('.form-group') .prepend(' ' + ' ' + this.errorMessage + ' ' + ' '); } }); $('. ... Us Who We Are Careers Contact Us Policies Corporate Support Newsroom Press Releases For Professionals En Español ...
Full Text Available ... function (data) { $('#survey-errors').remove(); $('.survey-form .form-group .survey-alert-wrap').remove(); if (data.submitSurveyResponse.success == ' ... this.errorField) { $('input[name="' + this.errorField + '"]').closest('.form-group') .prepend(' ' + ' ' + this.errorMessage + ' ' + ' '); } }); $('.survey-form').show(); } else { $('.survey- ...
Multicomponent and Dissipative Self-Assembly Approaches : Towards functional materials
Boekhoven, J.
2012-01-01
The use of self-assembly has proven to be a powerful approach to create smart and functional materials and has led to a vast variety of successful examples. However, the full potential of self-assembly has not been reached. Despite the number of successful artificial materials based on
Social media for physiotherapy clinics: considerations in creating a Facebook page
Ahmed, Osman; Claydon, L.S.; Ribeiro, D.C.; Arumugam, A.; Higgs, C.; Baxter, G.D.
2013-01-01
Social media websites play a prominent role in modern society, and the most popular of these websites is Facebook. Increasingly, physiotherapy clinics have begun to utilize Facebook in order to create pages to publicize their services. There are many factors to consider in the planning, implementing, and maintenance of Facebook pages for physiotherapy clinics, including ethical and privacy issues. The primary purpose of creating a page must be clearly defined, with dedicated clinicians given ...
Anisotropically functionalized carbon nanotube array based hygroscopic scaffolds.
Ozden, Sehmus; Ge, Liehui; Narayanan, Tharangattu N; Hart, Amelia H C; Yang, Hyunseung; Sridhar, Srividya; Vajtai, Robert; Ajayan, Pulickel M
2014-07-09
Creating ordered microstructures with hydrophobic and hydrophilic moieties that enable the collection and storage of small water droplets from the atmosphere, mimicking structures that exist in insects, such as the Stenocara beetle, which live in environments with limited amounts of water. Inspired by this approach, vertically aligned multiwalled carbon nanotube forests (NTFs) are asymmetrically end-functionalized to create hygroscopic scaffolds for water harvesting and storage from atmospheric air. One side of the NTF is made hydrophilic, which captures water from the atmosphere, and the other side is made superhydrophobic, which prevents water from escaping and the forest from collapsing. To understand how water penetrates into the NTF, the fundamentals of water/NTF surface interaction are discussed.
Create your own website using WordPress in a weekend
Moore, Alannah
2013-01-01
Having a website built can be a complicated and expensive undertaking. For large businesses this is a necessary expense, but for the ever-increasing number of independents and small businesses, this can easily be handled by the intrepid amateur. In Create Your Own Website Using WordPress in a Weekend, author Alannah Moore draws on her extensive experience to show how, in just a weekend, almost anyone can create a website in WordPress that looks professional and is entirely tailored to their needs and preferences. Through carefully structured step-by-step tutorials, the book takes the
Quantum functional analysis non-coordinate approach
Helemskii, A Ya
2010-01-01
This book contains a systematic presentation of quantum functional analysis, a mathematical subject also known as operator space theory. Created in the 1980s, it nowadays is one of the most prominent areas of functional analysis, both as a field of active research and as a source of numerous important applications. The approach taken in this book differs significantly from the standard approach used in studying operator space theory. Instead of viewing "quantized coefficients" as matrices in a fixed basis, in this book they are interpreted as finite rank operators in a fixed Hilbert space. This allows the author to replace matrix computations with algebraic techniques of module theory and tensor products, thus achieving a more invariant approach to the subject. The book can be used by graduate students and research mathematicians interested in functional analysis and related areas of mathematics and mathematical physics. Prerequisites include standard courses in abstract algebra and functional analysis.
Measuring coalition functioning: refining constructs through factor analysis.
Brown, Louis D; Feinberg, Mark E; Greenberg, Mark T
2012-08-01
Internal and external coalition functioning is an important predictor of coalition success that has been linked to perceived coalition effectiveness, coalition goal achievement, coalition ability to support evidence-based programs, and coalition sustainability. Understanding which aspects of coalition functioning best predict coalition success requires the development of valid measures of empirically unique coalition functioning constructs. The goal of the present study is to examine and refine the psychometric properties of coalition functioning constructs in the following six domains: leadership, interpersonal relationships, task focus, participation benefits/costs, sustainability planning, and community support. The authors used factor analysis to identify problematic items in our original measure and then piloted new items and scales to create a more robust, psychometrically sound, multidimensional measure of coalition functioning. Scales displayed good construct validity through correlations with other measures. Discussion considers the strengths and weaknesses of the refined instrument.
The functionalities of mobile applications : case study: WeChat
Dai, Si; Zhang, Xin
2015-01-01
The objective of this thesis is to find out the functionalities of mobile application. And the purpose of this study is to make a research on WeChat’s functionalities. A native application and mobile web application are the two different types of mobile applications. When designers start to create an application, companies need to discuss which type of app is more suitable for business targets. Each has both pros and cons which influence companies’ choice. WeChat is a popular mobile applicati...
Creating a Total Quality Environment (TQE) for Learning
Freed, Jann E.
2005-01-01
This article describes a model for creating a total quality environment (TQE) for learning in which everyone is considered a learner. The model consists of 11 interrelated characteristics derived from the literature in the areas of continuous improvement, leadership, learning, learning organizations, and spirituality. The characteristics in the…
Impact Of Non-Governmental Organizations\\' Activities In Creating ...
African Journals Online (AJOL)
The study examines the impact of Non-Governmental Organizations\\' (NGOs) intervention in creating awareness and changing the mindset of people in typical rural communities in Kaduna State towards victims of HIV/AIDS. Structured questionnaire were used to collect data from adult male and female as well as young ...
Creating Instructional Environments that Keep Students on TARGET
Boyce, B. Ann
2009-01-01
Teachers' instructional decisions, such as lesson goals, how students are grouped, or how students are recognized and evaluated, can affect their students' level of motivation related to physical activity. A physical educator's primary responsibility is to create a classroom environment that enhances motivation and fosters positive attitudes and…
Governing Bodies That Consider Joining or Creating Federations
Howarth, Eleanor
2015-01-01
This article reports the findings of a research study exploring what motivates governing bodies to consider joining or creating a federation, their experiences of the process and the barriers faced. The research methodology involved semi-structured telephone interviews, face-to-face interviews and analysis of relevant documentation. The varied…
Developing "Emancipatory Interest": Learning to Create Social Change
Caspersz, Donella; Olaru, Doina
2014-01-01
Developing an emancipatory interest enables individuals to free themselves from the intersubjective or commonly held meanings that dominate their understanding of their current world, and subsequently change their practices. We argue that developing an emancipatory interest is critical in learning to create social change, that is, wanting to…
Creating Student Engagement: The Kickstarter Active Learning Project
Manzon, Elliott
2017-01-01
Students can become disengaged from marketing material if they cannot see the direct application. Marketing material needs to be applied to a meaningful business task to engage and motivate students. This article introduces the Kickstarter Active Learning Project--an innovative semester-long project in which students create a Kickstarter…
Creating Spaces for Reconstructing Knowledge in Feminist Pedagogy.
Thompson, Audrey; Gitlin, Andrew
1995-01-01
Presents a conceptual outline for a feminist pedagogy that attempts to develop reconstructed knowledge. The paper describes how standpoint theory and conversation as method can further the aim of reconstructed knowledge, arguing that teachers and students with pedagogical relations should seek opportunities to create spaces within which to…
Full Text Available ... from Diabetes Forecast® magazine: wcie-meal-planning, . In this section Food Planning Meals Diabetes Meal Plans and ... ensureArray(data.submitSurveyResponse.errors); $.each(surveyErrors, function () { if (this.errorField) { $('input[name="' + this.errorField + '"]').closest('.form-group') . ...
Directory of Open Access Journals (Sweden)
Bartosz Kochański
2015-04-01
4 Wydział Kultury Fizycznej, Zdrowia i Turystyki, Uniwersytet Kazimierza Wielkiego w Bydgoszczy, Polska Streszczenie System oceny funkcjonalnej - Functional Movement Screen (FMS został stworzony przez Graya Cooka oraz Lee Burtona w 1995 roku. FMS jest koncepcją, która umożliwia kompleksową analizę jakości podstawowych wzorców ruchowych, ocenę ryzyka kontuzji oraz stwierdzenie istnienia ograniczeń i asymetrii. Test FMS złożony jest z 7 prób (głęboki przysiad, przeniesienie kończyny dolnej nad płotkiem, przysiad w wykroku, ruchomość obręczy barkowej, aktywne uniesienie wyprostowanej kończyny dolnej, ugięcie ramion w podporze, stabilność rotacyjna tułowia. W pracy zaprezentowano test Functional Movement Screen, jako kompleksowy system oceny funkcjonalnej pacjenta. Słowa kluczowe: Functional Movement Screen, FMS, ocena funkcjonalna, rehabilitacja. Abstract Functional Movement Screen (FMS was created by Gray Cook and Lee Burton in 1995. FMS is a concept that allows comprehensive analysis of the quality of basic movement patterns, risk assessment and finding of injury to the limitations and asymmetries. FMS test consists of 7 samples (deep squat, hurdle step, in-line lunge, shoulder mobility, active straight leg raise, trunk stability push up, rotational stability. The paper presents the Functional Movement Screen test, as a comprehensive system of functional assessment of the patient. Key words: Functional Movement Screen, FMS, functional assessment, rehabilitation.
Creating photorealistic virtual model with polarization-based vision system
Shibata, Takushi; Takahashi, Toru; Miyazaki, Daisuke; Sato, Yoichi; Ikeuchi, Katsushi
2005-08-01
Recently, 3D models are used in many fields such as education, medical services, entertainment, art, digital archive, etc., because of the progress of computational time and demand for creating photorealistic virtual model is increasing for higher reality. In computer vision field, a number of techniques have been developed for creating the virtual model by observing the real object in computer vision field. In this paper, we propose the method for creating photorealistic virtual model by using laser range sensor and polarization based image capture system. We capture the range and color images of the object which is rotated on the rotary table. By using the reconstructed object shape and sequence of color images of the object, parameter of a reflection model are estimated in a robust manner. As a result, then, we can make photorealistic 3D model in consideration of surface reflection. The key point of the proposed method is that, first, the diffuse and specular reflection components are separated from the color image sequence, and then, reflectance parameters of each reflection component are estimated separately. In separation of reflection components, we use polarization filter. This approach enables estimation of reflectance properties of real objects whose surfaces show specularity as well as diffusely reflected lights. The recovered object shape and reflectance properties are then used for synthesizing object images with realistic shading effects under arbitrary illumination conditions.
International Nuclear Information System (INIS)
Jung, Hee Young; Kim, Jae Hyoung; Shin, Taemin; Piao, Xiang Hao; Kim, Jae Soo; Lee, Gyung Kyu; Park, Il Soon; Park, Ji Hoon; Kang, Su Jin; You, Jin Jong; Chung, Sung Hoon
1998-01-01
To investigate the feasibility of functional MR imaging of motor language function and its usefulness in the determination of hemispheric language dominance. In order to activate the motor center of language, six subjects ( 5 right-handed, 1 left-handed: 3 males: 3 females) generated words. They were requested to do this silently, without physical articulation, in response to English letters presented visually. Gradient-echo images (TR/TE/flip angle, 80/60/40 deg; 64 x 128 matrix; 10 mm thickness) were obtained in three axial planes including the inferior frontal gyrus. Functional maps were created by the postprocessing of gradient-echo images, including subtraction and statistics. Areas of activation were topographically analyzed and numbers of activated pixels in each region were compared between right and left sides. The reproducibility of functional maps was tested by repetition of functional imaging in the same subjects. Our results suggest that functional MR imaging can depict the activation of motor language function in the brain and can be used a useful non-invasive method for determining the hemispheric dominance of language. (author). 26 refs., 3 figs
Can cognitive science create a cognitive economics?
Chater, Nick
2015-02-01
Cognitive science can intersect with economics in at least three productive ways: by providing richer models of individual behaviour for use in economic analysis; by drawing from economic theory in order to model distributed cognition; and jointly to create more powerful 'rational' models of cognitive processes and social interaction. There is the prospect of moving from behavioural economics to a genuinely cognitive economics. Copyright © 2014. Published by Elsevier B.V.
PROMOTING MEANINGFUL LEARNING THROUGH CREATE-SHARE-COLLABORATE
Sailin, Siti Nazuar; Mahmor, Noor Aida
2017-01-01
Students in this 21st century are required to acquire these 4C skills: Critical thinking, Communication, Collaboration and Creativity. These skills can be integrated in the teaching and learning through innovative teaching that promotes active and meaningful learning. One way of integrating these skills is through collaborative knowledge creation and sharing. This paper providesan example of meaningful teaching and learning activities designed within the Create-Share-Collaborate instructional...
MyPMFs: a simple tool for creating statistical potentials to assess protein structural models.
Postic, Guillaume; Hamelryck, Thomas; Chomilier, Jacques; Stratmann, Dirk
2018-05-29
Evaluating the model quality of protein structures that evolve in environments with particular physicochemical properties requires scoring functions that are adapted to their specific residue compositions and/or structural characteristics. Thus, computational methods developed for structures from the cytosol cannot work properly on membrane or secreted proteins. Here, we present MyPMFs, an easy-to-use tool that allows users to train statistical potentials of mean force (PMFs) on the protein structures of their choice, with all parameters being adjustable. We demonstrate its use by creating an accurate statistical potential for transmembrane protein domains. We also show its usefulness to study the influence of the physical environment on residue interactions within protein structures. Our open-source software is freely available for download at https://github.com/bibip-impmc/mypmfs. Copyright © 2018. Published by Elsevier B.V.
Properties of the systems created in p-p and p-Pb collisions in ALICE at LHC
AUTHOR|(INSPIRE)INSPIRE-00506861; Ortiz Velasquez, Antonio
It has been established that ultra-relativistic heavy-ion collisions produce a hot and dense QCD system which behaves like a perfect fluid. Albeit, the system is not the theoretical predicted Quark Gluon Plasma, its study results important to understand the cosmic evolution of our Universe. As well as specific aspects of QCD in the non-perturbative sector. For three decades, minimum-bias proton-proton collisions were used as the baseline in order to extract the novel properties of the hot and dense systems. Surprisingly, the analysis of pp collisions as a function of the event multiplicity revealed new phenomena: collective-like behavior. For the heavy-ion community it is crucial to understand the origin of the similarities among the systems created in pp, p-A and A-A collisions. In this thesis a study of small systems (pp and p-A collisions) as a function of the jet content and multiplicity was done, multi-partonic interactions and color reconnection have received special attention because they can produce r...
Linguistic Viewpoint in Crime News Narratives. Form, Function and Impact
Krieken, K.W.M. van
2016-01-01
In the coverage of criminal events, newspapers often publish narratives which combine characteristics of journalistic discourse with elements of literary fiction. The function of these stories is not so much to inform readers about what happened, but to create an immersive reading experience. How
Inclusive Teaching Circles: Mechanisms for Creating Welcoming Classrooms
Moore, Sharon; Wallace, Sherri L.; Schack, Gina; Thomas, M. Shelley; Lewis, Linda; Wilson, Linda; Miller, Shawnise; D'Antoni, Joan
2010-01-01
This essay examines the Inclusive Teaching Circle (ITC) as a mechanism for faculty development in creating instructional tools that embrace an inclusive pedagogy reflecting diversity, cultural competence and social justice. We describe one group's year-long participation in an ITC at a large, metropolitan research university in the south. Next, we…
Learning through Creating Robotic Models of Biological Systems
Cuperman, Dan; Verner, Igor M.
2013-01-01
This paper considers an approach to studying issues in technology and science, which integrates design and inquiry activities towards creating and exploring technological models of scientific phenomena. We implemented this approach in a context where the learner inquires into a biological phenomenon and develops its representation in the form of a…
Creating a Safe Environment for Women's Leadership Transformation
Debebe, Gelaye
2011-01-01
This study used qualitative data to describe how transformational learning was achieved in a women-only training (WOT) program. The article argues that an environment conducive to transformational learning for women was created from the harmonious coalescing of the presence of all-women participants and instructors with gender-sensitive teaching…
Kids Create Healthy Comics | NIH MedlinePlus the Magazine
... School Students Using Medline Plus Kids Create Healthy Comics Past Issues / Fall 2015 Table of Contents Fresh, ... use of reliable health information resources." The Four Comic Books Are: The Expert Investigator explores the impact ...
COCOA code for creating mock observations of star cluster models
Askar, Abbas; Giersz, Mirek; Pych, Wojciech; Dalessandro, Emanuele
2018-04-01
We introduce and present results from the COCOA (Cluster simulatiOn Comparison with ObservAtions) code that has been developed to create idealized mock photometric observations using results from numerical simulations of star cluster evolution. COCOA is able to present the output of realistic numerical simulations of star clusters carried out using Monte Carlo or N-body codes in a way that is useful for direct comparison with photometric observations. In this paper, we describe the COCOA code and demonstrate its different applications by utilizing globular cluster (GC) models simulated with the MOCCA (MOnte Carlo Cluster simulAtor) code. COCOA is used to synthetically observe these different GC models with optical telescopes, perform point spread function photometry, and subsequently produce observed colour-magnitude diagrams. We also use COCOA to compare the results from synthetic observations of a cluster model that has the same age and metallicity as the Galactic GC NGC 2808 with observations of the same cluster carried out with a 2.2 m optical telescope. We find that COCOA can effectively simulate realistic observations and recover photometric data. COCOA has numerous scientific applications that maybe be helpful for both theoreticians and observers that work on star clusters. Plans for further improving and developing the code are also discussed in this paper.
Creating an AI modeling application for designers and developers
Houlette, Ryan; Fu, Daniel; Jensen, Randy
2003-09-01
Simulation developers often realize an entity's AI by writing a program that exhibits the intended behavior. These behaviors are often the product of design documents written by designers. These individuals, while possessing a vast knowledge of the subject matter, might not have any programming knowledge whatsoever. To address this disconnect between design and subsequent development, we have created an AI application whereby a designer or developer sketches an entity's AI using a graphical "drag and drop" interface to quickly articulate behavior using a UML-like representation of state charts. Aside from the design-level benefits, the application also features a runtime engine that takes the application's data as input along with a simulation or game interface, and makes the AI operational. We discuss our experience in creating such an application for both designer and developer.
Bioactive Compounds in Functional Meat Products.
Pogorzelska-Nowicka, Ewelina; Atanasov, Atanas G; Horbańczuk, Jarosław; Wierzbicka, Agnieszka
2018-01-31
Meat and meat products are a good source of bioactive compounds with positive effect on human health such as vitamins, minerals, peptides or fatty acids. Growing food consumer awareness and intensified global meat producers competition puts pressure on creating new healthier meat products. In order to meet these expectations, producers use supplements with functional properties for animal diet and as direct additives for meat products. In the presented work seven groups of key functional constituents were chosen: (i) fatty acids; (ii) minerals; (iii) vitamins; (iv) plant antioxidants; (v) dietary fibers; (vi) probiotics and (vii) bioactive peptides. Each of them is discussed in term of their impact on human health as well as some quality attributes of the final products.
Our Lunar Destiny: Creating a Lunar Economy
Rohwer, Christopher J.
2000-01-01
"Our Lunar Destiny: Creating a Lunar Economy" supports a vision of people moving freely and economically between the earth and the Moon in an expansive space and lunar economy. It makes the economic case for the creation of a lunar space economy and projects the business plan that will make the venture an economic success. In addition, this paper argues that this vision can be created and sustained only by private enterprise and the legal right of private property in space and on the Moon. Finally, this paper advocates the use of lunar land grants as the key to unleashing the needed capital and the economic power of private enterprise in the creation of a 21st century lunar space economy. It is clear that the history of our United States economic system proves the value of private property rights in the creation of any new economy. It also teaches us that the successful development of new frontiers-those that provide economic opportunity for freedom-loving people-are frontiers that encourage, respect and protect the possession of private property and the fruits of labor and industry. Any new 21st century space and lunar economy should therefore be founded on this same principle.
Creating Virtual-hand and Virtual-face Illusions to Investigate Self-representation.
Ma, Ke; Lippelt, Dominique P; Hommel, Bernhard
2017-03-01
Studies investigating how people represent themselves and their own body often use variants of "ownership illusions", such as the traditional rubber-hand illusion or the more recently discovered enfacement illusion. However, these examples require rather artificial experimental setups, in which the artificial effector needs to be stroked in synchrony with the participants' real hand or face-a situation in which participants have no control over the stroking or the movements of their real or artificial effector. Here, we describe a technique to establish ownership illusions in a setup that is more realistic, more intuitive, and of presumably higher ecological validity. It allows creating the virtual-hand illusion by having participants control the movements of a virtual hand presented on a screen or in virtual space in front of them. If the virtual hand moves in synchrony with the participants' own real hand, they tend to perceive the virtual hand as part of their own body. The technique also creates the virtual-face illusion by having participants control the movements of a virtual face in front of them, again with the effect that they tend to perceive the face as their own if it moves in synchrony with their real face. Studying the circumstances that illusions of this sort can be created, increased, or reduced provides important information about how people create and maintain representations of themselves.
The Organisational Relationsships between Support Functions and Core Business
DEFF Research Database (Denmark)
Jensen, Per Anker
2007-01-01
The paper is based on research for a MBA thesis. The purpose is to clarify the organisational relationships between support functions and core business and how these relationships vary for strategic and operational support functions. The value chains for core businesses and support functions...... are analysed and related to empirical data from a case study on Danish Broadcasting Corporation. A particular support value chain is identified and a typology of archetypes of support functions is developed. The relationship between core business and strategic support is identified as primarily a general...... business orientation, while the relationship between core business and non-strategic functions is identified as mainly a specific customer orientation. It is concluded that a market relationship – internally or externally – is appropriate for non-strategic functions, while it is important to create a kind...
Determining and comparing protein function in Bacterial genome sequences
DEFF Research Database (Denmark)
Vesth, Tammi Camilla
of this class have very little homology to other known genomes making functional annotation based on sequence similarity very difficult. Inspired in part by this analysis, an approach for comparative functional annotation was created based public sequenced genomes, CMGfunc. Functionally related groups......In November 2013, there was around 21.000 different prokaryotic genomes sequenced and publicly available, and the number is growing daily with another 20.000 or more genomes expected to be sequenced and deposited by the end of 2014. An important part of the analysis of this data is the functional...... annotation of genes – the descriptions assigned to genes that describe the likely function of the encoded proteins. This process is limited by several factors, including the definition of a function which can be more or less specific as well as how many genes can actually be assigned a function based...
GCL – An Easy Way for Creating Graphical User Interfaces
Directory of Open Access Journals (Sweden)
Mariusz Trzaska
2011-02-01
Full Text Available Graphical User Interfaces (GUI can be created using several approaches. Beside using visual editors or a manually written source code, it is possible to employ a declarative method. Such a solution usually allows working on a higher abstraction level which saves the developers' time and reduces errors. The approach can follow many ideas. One of them is based on utilizing a Domain Specific Language (DSL. In this paper we present the results of our research concerning a DSL language called GCL (GUI Creating Language. The prototype is implemented as a library for Java with an API emulating the syntax and semantics of a DSL language. A programmer, using a few keywords, is able to create different types of GUIs, including forms, panels, dialogs, etc. The widgets of the GUI are built automatically during the run-time phase based on a given data instance (an ordinary Java object and optionally are to be customized by the programmer. The main contribution of our work is delivering a working library for a popular platform. The library could be easily ported for other programming languages such the MS C#.
A Tiered Control Plane Model for Service Function Chaining Isolation
Directory of Open Access Journals (Sweden)
Håkon Gunleifsen
2018-06-01
Full Text Available This article presents an architecture for encryption automation in interconnected Network Function Virtualization (NFV domains. Current NFV implementations are designed for deployment within trusted domains, where overlay networks with static trusted links are utilized for enabling network security. Nevertheless, within a Service Function Chain (SFC, Virtual Network Function (VNF flows cannot be isolated and end-to-end encrypted because each VNF requires direct access to the overall SFC data-flow. This restricts both end-users and Service Providers from enabling end-to-end security, and in extended VNF isolation within the SFC data traffic. Encrypting data flows on a per-flow basis results in an extensive amount of secure tunnels, which cannot scale efficiently in manual configurations. Additionally, creating secure data plane tunnels between NFV providers requires secure exchange of key parameters, and the establishment of an east–west control plane protocol. In this article, we present an architecture focusing on these two problems, investigating how overlay networks can be created, isolated, and secured dynamically. Accordingly, we propose an architecture for automated establishment of encrypted tunnels in NFV, which introduces a novel, tiered east–west communication channel between network controllers in a multi-domain environment.
Practicing Statistics by Creating Exercises for Fellow Students
Bebermeier, Sarah; Reiss, Katharina
2016-01-01
This article outlines the execution of a workshop in which students were encouraged to actively review the course contents on descriptive statistics by creating exercises for their fellow students. In a first-year statistics course in psychology, 39 out of 155 students participated in the workshop. In a subsequent evaluation, the workshop was…
Creating Start-up Companies around NCI Inventions | Poster
By Karen Surabian, Thomas Stackhouse, and Rose Freel, Contributing Writers, and Rosemarie Truman, Guest Writer The National Cancer Institute (NCI), led by the Technology Transfer Center (TTC), the Avon Foundation, and The Center for Advancing Innovation have partnered to create a “first-of-a-kind” Breast Cancer Start-up Challenge.
Pharmacology Students' Perceptions of Creating Multimodal Digital Explanations
Nielsen, W.; Hoban G.; Hyland, C. J. T.
2017-01-01
Students can now digitally construct their own representations of scientific concepts using a variety of modes including writing, diagrams, 2-D and 3-D models, images or speech, all of which communicate meaning. In this study, final-year chemistry students studying a pharmacology subject created a ''blended media'' digital product as an assignment…
Creating Science Picture Books for an Authentic Audience
DeFauw, Danielle L.; Saad, Klodia
2014-01-01
This article presents an authentic writing opportunity to help ninth-grade students use the writing process in a science classroom to write and illustrate picture books for fourth-grade students to demonstrate and share their understanding of a biology unit on cells. By creating a picture book, students experience the writing process, understand…
Embodied mind knowledge in leadership practice: creating space in patterned thoughts and behaviors
Karssiens, Astra Elise Amaranta; van der Linden, Claartje; Wilderom, Celeste P.M.; Furtmueller-Ettinger, Elfriede
2013-01-01
This article invites leaders and managers who are successful in their work, but feel unfulfilled and stressed, to create space in their fixed patterns of thinking and acting. Creating such space generates the possibility of experiencing meaningfulness and satisfaction at work and producing
Creating Simple Admin Tools Using Info*Engine and Java
Jones, Corey; Kapatos, Dennis; Skradski, Cory; Felkins, J. D.
2012-01-01
PTC has provided a simple way to dynamically interact with Windchill using Info*Engine. This presentation will describe how to create a simple Info*Engine Tasks capable of saving Windchill 10.0 administration of tedious work.
Do Treasure Islands Create Firm Value?
DEFF Research Database (Denmark)
Lai, Tat-kei; Ng, Travis
They do! Otherwise, their use would not have been so prevalent among firms. How much firm value they create, however, is still an open question. Exploiting a political event in the U.K. that suddenly raised the cost of using tax havens, we find that there was a 0.87% reduction in cumulative...... abnormal return (CAR) among the sampled firms, corresponding to about £532 million in market capitalization. The firms of stronger corporate governance registered a stronger reduction in CAR. A simple linear extrapolation suggests that the firm value contributed by tax havens can be as much as £31 billion....
DOE Energy Frontiers Research Center for Heterogeneous Functional Materials; the “HeteroFoaM Center”
Energy Technology Data Exchange (ETDEWEB)
Reifsnider, Kenneth Leonard [Univ. of South Carolina, Columbia, SC (United States)
2016-11-03
Synopsis of five year accomplishments: Devices that convert and store energy are generally made from heterogeneous constituent materials that act and interact to selectively conduct, transport, and separate mass, heat, and charge. Controlling these actions and interactions enables the technical breakthroughs that have made fuel cells, batteries, and solid state membranes, for example, essential parts of our society. In the biological sense, these materials are ‘vascular’ rather than primitive ‘cellular’ materials, in which the arrangements and configurations of the constituents (including their void phases) play essential and definitive roles in their functional capabilities. In 2009 a group of investigators, with lifetime investments of effort in the understanding of heterogeneous materials, recognized that the design of such material systems is not an optimization problem as such. Local interactions of the constituents create “emergent” properties and responses that are not part of the formal set of constituent characteristics, in much the same sense that society and culture is created by the group interactions of the people involved. The design of emergent properties is an open question in all formal science, but for energy materials the lack of this foundation science relegates development tasks to Edisonian trial and error, with anecdotal success and frequent costly failures. That group defined, for the first time, multi-scale heterogeneous functional materials with functional disordered and void phase regions as “HeteroFoaM,” and formed the first multidisciplinary research team to define and codify the foundation science of that material class. The primary goal of the HeteroFoaM Center was, and is, to create and establish the multi-scale fundamental knowledge and related methodology required for the rational and systematic multiphysics design of heterogeneous functional materials and their interfaces and surfaces for applications in energy