WorldWideScience

Sample records for equilibrium factor determination

  1. A gamma-spectrometer determining equilibrium factor in situ

    International Nuclear Information System (INIS)

    Feng Weiheng

    1992-01-01

    The author expounds main function, scientific value and practical significance of Model SY500 gamma-spectrometer, which can determine radioactive factor equilibrium (k p ) in-situ. Accuracy, steadiness and differential of the technology has been proved on the models of Radiometric Measurement Station of China Nuclear Industry Corporation. The author enumerates several examples such as k p survey at gold-bearing glebe, at uranium-bearing glebe, at the ground above ground water and 21 stations of Beijing subway

  2. Study on direct determination of uranium and efficient equilibrium factor by gamma-ray spectrometer

    International Nuclear Information System (INIS)

    Liu Chunkui

    1990-01-01

    The test principle, test set and surveying methods for conducting gamma-ray spectrometry on conveyer are presented. The conversion coefficient of the spectrometer has been found by using duallinear regression analysis of uranium and radon and their higher and lower bands of gamma-ray spectra. The efficient equilibrium factor can be quickly determined, and the direct determination of uranium in the non-equilibrium condition of uranium and radium can be made

  3. The determination of a continuous radon daughter equilibrium factor in an operating uranium mine

    International Nuclear Information System (INIS)

    Billingsley, D.

    1992-01-01

    Radon daughter exposures to workers at the Olympic Dam Operations copper and uranium mine are calculated from a series of grab samples obtained from various work locations around the mine. Currently under consideration is the introduction of personal passive radon dosimeters to determine the workers' radon daughter exposures. The study reported in this paper involved the determination of long-term equilibrium factors using real-time monitoring of radon and radon daughters. Consequently, variation in equilibrium factor for different tasks can be identified. In practice, the equilibrium factor varies with location and task; however, a conservative over-estimate of 0.28 can be confidently applied to all tasks. The error due to over-estimation remains minimal for all workers. This real-time monitoring method will reduce potential errors in dose assessment compared with the grab sampling technique. 5 refs., 1 tab., 4 figs

  4. Determination of equilibrium factor between radon and its progeny using surface barrier detector for various shapes of passive radon dosimeters

    Energy Technology Data Exchange (ETDEWEB)

    Jamil, K. [PINSTECH, Islamabad (Pakistan). Environ. Radiat. Group; Fazal-ur-Rehman [PINSTECH, Islamabad (Pakistan). Environ. Radiat. Group; Ali, S. [PINSTECH, Islamabad (Pakistan). Environ. Radiat. Group; Khan, H.A. [PINSTECH, Islamabad (Pakistan). Environ. Radiat. Group

    1997-03-21

    In the field of radon dosimetry, it is customary to measure radon ({sup 222}Rn) concentration while potential health hazard is due to the radon short-lived progeny. When radon is in secular equilibrium, the measured activity of radon equals the activity of radon`s progeny. However, in practical cases an inequilibrium between radon and its progeny exists which is measured in terms of the equilibrium factor. To determine the equilibrium factor between radon and its progeny in a closed environment various shapes of passive dosimeters based upon solid state nuclear track detectors (SSNTDs) are employed. In order to observe the dependence of equilibrium factor upon shapes or effective volumes, experiments have been performed replacing the SSNTDs with a surface barrier detector in Karlsruhe diffusion chamber, pen-type and box-type dosimeters. Using the collected alpha spectra, the equilibrium factor has been determined for a radon-air mixture in a custom designed radon chamber simulating a closed environment of a room. The results show that the radon equilibrium factor is about 0.20 for different shapes of dosimeters studied in this research. It is concluded that the determination of equilibrium factor between radon and its progeny does not depend upon effective volume or shape of the passive dosimeters using alpha spectroscopic data acquired by surface barrier detector. (orig.).

  5. Determination of equilibrium factor between radon and its progeny using surface barrier detector for various shapes of passive radon dosimeters

    International Nuclear Information System (INIS)

    Jamil, K.; Fazal-ur-Rehman; Ali, S.; Khan, H.A.

    1997-01-01

    In the field of radon dosimetry, it is customary to measure radon ( 222 Rn) concentration while potential health hazard is due to the radon short-lived progeny. When radon is in secular equilibrium, the measured activity of radon equals the activity of radon's progeny. However, in practical cases an inequilibrium between radon and its progeny exists which is measured in terms of the equilibrium factor. To determine the equilibrium factor between radon and its progeny in a closed environment various shapes of passive dosimeters based upon solid state nuclear track detectors (SSNTDs) are employed. In order to observe the dependence of equilibrium factor upon shapes or effective volumes, experiments have been performed replacing the SSNTDs with a surface barrier detector in Karlsruhe diffusion chamber, pen-type and box-type dosimeters. Using the collected alpha spectra, the equilibrium factor has been determined for a radon-air mixture in a custom designed radon chamber simulating a closed environment of a room. The results show that the radon equilibrium factor is about 0.20 for different shapes of dosimeters studied in this research. It is concluded that the determination of equilibrium factor between radon and its progeny does not depend upon effective volume or shape of the passive dosimeters using alpha spectroscopic data acquired by surface barrier detector. (orig.)

  6. Determination of tin equilibrium isotope fractionation factors from synchrotron radiation experiments

    NARCIS (Netherlands)

    Polyakov, VB; Mineev, SD; Clayton, RN; Hu, G; Mineev, KS

    2005-01-01

    A method of determination of the reduced isotopic partition function ratio (beta-factor) from the partial density of state (PDOS) obtained by inelastic nuclear resonant X-ray scattering (INRXS) in synchrotron radiation experiments has been established. The method has been demonstrated by the example

  7. A passive method for the determination of the equilibrium factor between radon gas and its short period progeny

    International Nuclear Information System (INIS)

    Lopez, Fabio O.; Canoba, Analia C.

    2001-01-01

    Due to the radiological importance of 222 Rn gas and its progeny of short period it is extremely necessary to count with an adequate methodology for the determination of its concentration in the different atmospheres in which human activity is developed. In this work a method was developed to determine the concentration of 222 Rn gas and the equilibrium factor between the concentration of the gas and its descendants, by means of a single device that has two Makrofol passive tracks detector. This device is completely passive and integrating, conditions that make it very appropriate to be used in any atmospheres in which human activity is developed, for example in houses, schools, places of work, underground mines, etc. (author)

  8. Determination of Ni{sup 2+} using an equilibrium ion exchange technique: Important chemical factors and applicability to environmental samples

    Energy Technology Data Exchange (ETDEWEB)

    Worms, Isabelle A.M. [CABE - Analytical and Biophysical Environmental Chemistry, University of Geneva, 30 quai Ernest Ansermet 1211 Geneva 4 (Switzerland); Wilkinson, Kevin J. [Department of Chemistry, University of Montreal C.P. 6128, succursale Centre-ville Montreal, H3C 3J7 (Canada)], E-mail: KJ.Wilkinson@umontreal.ca

    2008-05-26

    In natural waters, the determination of free metal concentrations is a key parameter for studying bioavailability. Unfortunately, few analytical tools are available for determining Ni speciation at the low concentrations found in natural waters. In this paper, an ion exchange technique (IET) that employs a Dowex resin is evaluated for its applicability to measure [Ni{sup 2+}] in freshwaters. The presence of major cations (e.g. Na, Ca and Mg) reduced both the times that were required for equilibration and the partition coefficient to the resin ({lambda}{sup '}{sub Ni}). IET measurements of [Ni{sup 2+}] in the presence of known ligands (citrate, diglycolate, sulfoxine, oxine and diethyldithiocarbamate) were verified by thermodynamic speciation models (MINEQL{sup +} and VisualMINTEQ). Results indicated that the presence of hydrophobic complexes (e.g. Ni(DDC){sub 2}{sup 0}) lead to an overestimation of the Ni{sup 2+} fraction. On the other hand, [Ni{sup 2+}] measurements that were made in the presence of amphiphilic complexes formed with humic substances (standard aquatic humic acid (SRHA) and standard aquatic fulvic acid (SRFA)) were well correlated to free ion concentrations that were calculated using a NICA-DONNAN model. An analytical method is also presented here to reduce the complexity of the calibration (due to the presence of many other cations) for the use of Dowex equilibrium ion exchange technique in natural waters.

  9. Determination of vapor-liquid equilibrium data and decontamination factors needed for the development of evaporator technology for use in volume reduction of radioactive waste streams

    International Nuclear Information System (INIS)

    Betts, S.E.

    1993-01-01

    A program is currently in progress at Argonne National Laboratory to evaluate and develop evaporator technology for concentrating radioactive waste streams. By concentrating radioactive waste streams, disposal costs can be significantly reduced. To effectively reduce the volume of waste, the evaporator must achieve high decontamination factors so that the distillate is sufficiently free of radioactive material. One technology that shows a great deal of potential for this application is being developed by LICON, Inc. In this program, Argonne plans to apply LICON's evaporator designs to the processing of radioactive solutions. Concepts that need to be incorporated into the design of the evaporator include, criticality safety, remote operation and maintenance, and materials of construction. To design an effective process for concentrating waste streams, both solubility and vapor-liquid equilibrium data are needed. The key issue, however, is the high decontamination factors that have been demonstrated by this equipment. Two major contributions were made to this project. First, a literature survey was completed to obtain available solubility and vapor-liquid equilibrium data. Some vapor-liquid data necessary for the project but not available in the literature was obtained experimentally. Second, the decontamination factor for the evaporator was determined using neutron activation analysis (NAA)

  10. Experimental determination of thermodynamic equilibrium in biocatalytic transamination

    DEFF Research Database (Denmark)

    Tufvesson, Pär; Jensen, Jacob Skibsted; Kroutil, Wolfgang

    2012-01-01

    The equilibrium constant is a critical parameter for making rational design choices in biocatalytic transamination for the synthesis of chiral amines. However, very few reports are available in the scientific literature determining the equilibrium constant (K) for the transamination of ketones....... Various methods for determining (or estimating) equilibrium have previously been suggested, both experimental as well as computational (based on group contribution methods). However, none of these were found suitable for determining the equilibrium constant for the transamination of ketones. Therefore...

  11. Measurements of equilibrium factor between radon and its progeny by using of SSNTD and quality assurance

    International Nuclear Information System (INIS)

    Nikezic, D.

    2009-01-01

    In this paper, a critical survey of existing methods for equilibrium factor determination by using SSNTD is given. An original method, developed by Nikezic and Yu [11,12], that is based on application of LR115 detector is presented. New introduced quantity, so called, proxy factor, that is measurable with LR115 detector, is well correlated with equilibrium factor. (author) [sr

  12. Determination of gross plasma equilibrium from magnetic multipoles

    Energy Technology Data Exchange (ETDEWEB)

    Kessel, C.E.

    1986-05-01

    A new approximate technique to determine the gross plasma equilibrium parameters, major radius, minor radius, elongation and triangularity for an up-down symmetric plasma is developed. It is based on a multipole representation of the externally applied poloidal magnetic field, relating specific terms to the equilibrium parameters. The technique shows reasonable agreement with free boundary MHD equilibrium results. The method is useful in dynamic simulation and control studies.

  13. Determination of gross plasma equilibrium from magnetic multipoles

    International Nuclear Information System (INIS)

    Kessel, C.E.

    1986-05-01

    A new approximate technique to determine the gross plasma equilibrium parameters, major radius, minor radius, elongation and triangularity for an up-down symmetric plasma is developed. It is based on a multipole representation of the externally applied poloidal magnetic field, relating specific terms to the equilibrium parameters. The technique shows reasonable agreement with free boundary MHD equilibrium results. The method is useful in dynamic simulation and control studies

  14. Measurement of the Radon equilibrium factor in Ottawa dwellings

    International Nuclear Information System (INIS)

    Rahman, Naureen M.; Tracy, Bliss L.; Chen, Jing; Moir, Deborah

    2008-01-01

    The degree of radioactive equilibrium between radon and its short-lived radioactive decay products can be expressed as the equilibrium factor 'F'. It is often assumed to be 0.40 for assessing risk. While this is usually a reasonable assumption, there are cases where the equilibrium factor can differ from 0.40 significantly due to various housing and environmental factors. Because the effective dose depends strongly on the F value, it is important for risk assessment to know the normal range of the F factor for settings specific to Canada. For this purpose, measurements were undertaken at several Ottawa homes with a wide range of radon concentrations. The experimental homes were detached houses with a composite structure of brick, concrete blocks and wood. The hourly variation of radon concentration and its decay products concentration were observed employing a portable ionisation chamber (permitting the continuous radon monitoring as well as the determination of selected parameters -- air temperature, pressure and humidity), Lucas type passive scintillation cell and a working level monitor. The calculated F value lay between 0.20 - 0.52. In addition, the diurnal variation of the F value was observed and the indoor environment was monitored. (author)

  15. Experimental determination of thermodynamic equilibrium in biocatalytic transamination.

    Science.gov (United States)

    Tufvesson, Pär; Jensen, Jacob S; Kroutil, Wolfgang; Woodley, John M

    2012-08-01

    The equilibrium constant is a critical parameter for making rational design choices in biocatalytic transamination for the synthesis of chiral amines. However, very few reports are available in the scientific literature determining the equilibrium constant (K) for the transamination of ketones. Various methods for determining (or estimating) equilibrium have previously been suggested, both experimental as well as computational (based on group contribution methods). However, none of these were found suitable for determining the equilibrium constant for the transamination of ketones. Therefore, in this communication we suggest a simple experimental methodology which we hope will stimulate more accurate determination of thermodynamic equilibria when reporting the results of transaminase-catalyzed reactions in order to increase understanding of the relationship between substrate and product molecular structure on reaction thermodynamics. Copyright © 2012 Wiley Periodicals, Inc.

  16. Thiazol-4-one derivatives from the reaction of monosubstituted thioureas with maleimides: structures and factors determining the selectivity and tautomeric equilibrium in solution

    Directory of Open Access Journals (Sweden)

    Alena S. Pankova

    2016-11-01

    Full Text Available 2-(Alkyl(arylaminothiazol-4(5H-ones can regioselectively be prepared from monoalkyl(arylthioureas and maleimides. In solution, the former heterocycles exist in a tautomeric equilibrium with 2-(alkyl(aryliminothiazolidin-4-ones and the substituent on the exocyclic nitrogen atom governs the ratio of these tautomers. Isomers with the alkyl group in the endocyclic position can be obtained from N-methyl(ethylthioureas. 2D NMR spectroscopy and DFT calculations rationalize experimental results.

  17. Real balance effects, timing, and equilibrium determination

    NARCIS (Netherlands)

    Stoltenberg, C.A.

    2012-01-01

    By assuming that money balances at the beginning instead of at the end of the period provide transaction services, standard results on nominal and real determinacy in monetary models are overturned. The key is that predetermined real money balances can be a state variable. Whereas the determination

  18. Equilibrium curve determination of HF adsorption by activated carbon

    International Nuclear Information System (INIS)

    Bahrami, H.; Safdari, S. J.; Mousavian, S. M. A.

    2010-01-01

    One of the byproducts of uranium enrichment industry is hydrogen fluoride gas. Due to the toxicity and corrosivity of the molecule, it has adverse effects on the environment and the process. Therefore, it must be removed by adsorption towers. The activated carbon is one of the proposed sorbent for the adsorption. Hydrogen fluoride adsorption equilibrium curve gives important information for designing the adsorption towers. In this article, the hydrogen fluoride adsorption and adsorption factors were determined experimentally, and four different types of carbon have been used. The operating pressure in all tests was less than 30 mbar. Comparison between the obtained experimental equilibrium curves shows that the first, second and fourth types of activated carbon are suitable for the adsorption of hydrogen fluoride. The experimental data were fitted using mathematical models of Langmuir, Freundlich, Toth and Henry. The results show that Toth mathematical model is more suitable than other models. Also, the absolute error were predicted by the model of Toth for the first, second and fourth types of the activated carbon were 12.9, 16.5 and 34 percent, respectively.

  19. Using nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM) for simultaneous determination of concentration and equilibrium constant.

    Science.gov (United States)

    Kanoatov, Mirzo; Galievsky, Victor A; Krylova, Svetlana M; Cherney, Leonid T; Jankowski, Hanna K; Krylov, Sergey N

    2015-03-03

    Nonequilibrium capillary electrophoresis of equilibrium mixtures (NECEEM) is a versatile tool for studying affinity binding. Here we describe a NECEEM-based approach for simultaneous determination of both the equilibrium constant, K(d), and the unknown concentration of a binder that we call a target, T. In essence, NECEEM is used to measure the unbound equilibrium fraction, R, for the binder with a known concentration that we call a ligand, L. The first set of experiments is performed at varying concentrations of T, prepared by serial dilution of the stock solution, but at a constant concentration of L, which is as low as its reliable quantitation allows. The value of R is plotted as a function of the dilution coefficient, and dilution corresponding to R = 0.5 is determined. This dilution of T is used in the second set of experiments in which the concentration of T is fixed but the concentration of L is varied. The experimental dependence of R on the concentration of L is fitted with a function describing their theoretical dependence. Both K(d) and the concentration of T are used as fitting parameters, and their sought values are determined as the ones that generate the best fit. We have fully validated this approach in silico by using computer-simulated NECEEM electropherograms and then applied it to experimental determination of the unknown concentration of MutS protein and K(d) of its interactions with a DNA aptamer. The general approach described here is applicable not only to NECEEM but also to any other method that can determine a fraction of unbound molecules at equilibrium.

  20. Computer program determines chemical composition of physical system at equilibrium

    Science.gov (United States)

    Kwong, S. S.

    1966-01-01

    FORTRAN 4 digital computer program calculates equilibrium composition of complex, multiphase chemical systems. This is a free energy minimization method with solution of the problem reduced to mathematical operations, without concern for the chemistry involved. Also certain thermodynamic properties are determined as byproducts of the main calculations.

  1. The Determinants of Income in a Malthusian Equilibrium

    DEFF Research Database (Denmark)

    Sharp, Paul Richard; Strulik, Holger; Weisdorf, Jacob Louis

    2012-01-01

    This study constructs a simple, two-sector Malthusian model with agriculture and industry, and uses it to identify the determinants of income in a Malthusian equilibrium. We make standard assumptions about preferences and technologies, but in contrast to existing studies we assume that children a...... recently been demonstrated in the literature, but also with the level of productivity in the industrial sector. An empirical analysis using data for pre-industrial England lends support to both hypotheses....

  2. Calibration coefficient of the SSNTD and equilibrium factor for radon

    International Nuclear Information System (INIS)

    Planinic, J.; Vukovic, B.

    1993-01-01

    Disintegration, ventilation and deposition were considered as removal processes of the radon and its short-lived daughters in air and respective concentration equations were applied. Calibration coefficient (K F ) of the solid state nuclear track detector (SSNTD) LR-115 for radon and the equilibrium factor (F) were related to track densities of the bare detector (D) and the filtered one (D o ). A useful relationship between K F , F and detector sensitivity coefficient (k) was derived. Using the calibrated value k=3.29 * 10 -3 m, the exposed detectors gave the average values of the equilibrium factor, calibration coefficient and indoor radon concentration of a single house living room in Osijek 0.46, 142.3 m -1 and 37.8 Bq m -3 , respectively. (author) 4 refs.; 1 fig

  3. Size determination of an equilibrium enzymic system by radiation inactivation

    International Nuclear Information System (INIS)

    Simon, P.; Swillens, S.; Dumont, J.E.

    1982-01-01

    Radiation inactivation of complex enzymic systems is currently used to determine the enzyme size and the molecular organization of the components in the system. An equilibrium model was simulated describing the regulation of enzyme activity by association of the enzyme with a regulatory unit. It is assumed that, after irradiation, the system equilibrates before the enzyme activity is assayed. The theoretical results show that the target-size analysis of these numerical data leads to a bad estimate of the enzyme size. Moreover, some implicit assumptions such as the transfer of radiation energy between non-covalently bound molecules should be verified before interpretation of target-size analysis. It is demonstrated that the apparent target size depends on the parameters of the system, namely the size and the concentration of the components, the equilibrium constant, the relative activities of free enzyme and enzymic complex, the existence of energy transfer, and the distribution of the components between free and bound forms during the irradiation. (author)

  4. Determination of the secondary electron equilibrium using an extrapolation chamber

    International Nuclear Information System (INIS)

    Marshall, E.T.; Vaziri, K.; Krueger, F.P.; Cossairt, J.D.

    1996-09-01

    To ensure that the external personnel dosimetry program conducted by U. S. Department of Energy (DOE) contractors is of the highest quality, the DOE established the Department of Energy Laboratory Accreditation Program or DOELAP. The contractor's dosimetry program is assessed against the criteria set forth for dosimeter performance and the associated quality assurance and calibration programs. Although personnel dosimeters are not processed or calibrated by Fermilab, a proactive quality assurance program is in place to ensure accurate monitoring. This program includes quarterly blind testing of the dosimeters used by personnel. During the on-site assessment conducted of Fermilab's external dosimetry program during May 1994, an observation with regard to equipment maintenance and calibration was made: ''calibration personnel should probably review the electron secondary equilibrium needs at various irradiation distances from the 137 Cs irradiation systems'' The majority of the secondary electrons are generated through interactions of the beam with the collimator. Secondary electrons increase the low energy component of the radiation field, increasing the shallow doses measured. For dosimetric purposes, this increase needs to be defined so appropriate corrections to calculations or modifications to the facility can be made. Prompted by this observation, a study was designed to investigate the electron secondary equilibrium in the facility used for the blind testing by determining the dose equivalent as a function of depth in a tissue-equivalent medium. This presentation summarizes the methodology utilized and results of the investigation

  5. Major parameters affecting the calculation of equilibrium factor using SSNTD-measured track densities

    International Nuclear Information System (INIS)

    Abo-Elmagd, M.; Mansy, M.; Eissa, H.M.; El-Fiki, M.A.

    2006-01-01

    The equilibrium factor F between radon and its daughters as a function of the track density ratio D/D 0 between bare and in can track detectors is solved graphically and gave more accurate solution than that solved mathematically elsewhere. The advantages of the graphical solution come from its simplicity and does not need any tedious mathematical formula or a computer program. The simplicity of this solution makes us study many parameters that affect the equilibrium factor determination such as the detector type, the diffusion chamber dimensions, the membrane specifications and the behavior of α-emitters around the detector. The results show that the equilibrium factor as a function of D/D 0 takes different form according to the facility used. The range of this study covers two widely used detectors (CR-39 and LR-115) equipped in two widely used diffusion chambers (small and medium chambers)

  6. Air radon equilibrium factor measurement in a Waste Water Pre-Treatment Plant

    International Nuclear Information System (INIS)

    Martinez, J.E.; Juste, B.; Ortiz, J.; Martorell, S.; Verdu, G.

    2017-01-01

    We analyze in this paper a Waste Water Pre-Treatment Plant (WWTP) located at the Mediterranean coast with air radon concentration above Spanish action level (600 Bq per cubic meter). This paper presents a method for radon equilibrium determination by gamma spectrometry measuring of the radon progeny concentrations in the air, in order to estimate WWTP workers effective dose more exactly. The method is based on simultaneous sampling of air through a filter paper and alpha spectrometry measurement of radon activity concentration in the air. According to the measured radon activity concentration in the air of 368±45 Bq/m 3 the equilibrium factor between radon and progenies is estimated to be F=0.27, which is in good agreement with expected values. - Highlights: • High levels of Radon in a workplace can increase health risks in the employees. • Using the typical equilibrium factor 0.4 could lead to an error in the estimation of radon doses. • We present a method for radon equilibrium determination. • Equilibrium factor is calculated by gamma spectrometry measuring of radon progeny concentrations in the air.

  7. A method for high accuracy determination of equilibrium relative humidity

    DEFF Research Database (Denmark)

    Jensen, O.M.

    2012-01-01

    This paper treats a new method for measuring equilibrium relative humidity and equilibrium dew-point temperature of a material sample. The developed measuring device is described – a Dew-point Meter – which by means of so-called Dynamic Dew-point Analysis permits quick and very accurate...

  8. Long term and equilibrium factor indoor radon measurements

    International Nuclear Information System (INIS)

    Martinez, T.; Lartigue, J.; Navarrete, M.; Cabrera, L.; Ramirez, A.; Elizarraras, V.

    1998-01-01

    This paper presents the annual radon gas concentrations obtained during the 1994-1995 monitoring campaign using passive electret system (type E-PERM). Radon levels were measured in 154 single family dwellings, in normal occupancy conditions (open house condition) in the metropolitan zone of Mexico City. At the same time radon monitoring was performed outdoors. The results show the general log-normal distribution of integrated indoor radon concentration with an annual indoor mean of 3.8 pCi x l -1 . The seasonal variations show the minimum mean values in the summer season which are 39% lower than that in autumn. Equilibrium factors (F) were measured in 12 typical houses both in autumn and winter using a continuous working level monitor for short-lived radon decay products and H-chamber loaded with a short term electret (HST, E-PERM) for radon gas. The obtained total mean equilibrium factors are: F=0.41±0.17 and F=0.29±0.04 for indoor and outdoor, respectively. A quality program was also improved. (author)

  9. Continuous equilibrium scores: factoring in the time before a fall.

    Science.gov (United States)

    Wood, Scott J; Reschke, Millard F; Owen Black, F

    2012-07-01

    The equilibrium (EQ) score commonly used in computerized dynamic posturography is normalized between 0 and 100, with falls assigned a score of 0. The resulting mixed discrete-continuous distribution limits certain statistical analyses and treats all trials with falls equally. We propose a simple modification of the formula in which peak-to-peak sway data from trials with falls is scaled according the percent of the trial completed to derive a continuous equilibrium (cEQ) score. The cEQ scores for trials without falls remain unchanged from the original methodology. The cEQ factors in the time before a fall and results in a continuous variable retaining the central tendencies of the original EQ distribution. A random set of 5315 Sensory Organization Test trials were pooled that included 81 falls. A comparison of the original and cEQ distributions and their rank ordering demonstrated that trials with falls continue to constitute the lower range of scores with the cEQ methodology. The area under the receiver operating characteristic curve (0.997) demonstrates that the cEQ retained near-perfect discrimination between trials with and without falls. We conclude that the cEQ score provides the ability to discriminate between ballistic falls from falls that occur later in the trial. This approach of incorporating time and sway magnitude can be easily extended to enhance other balance tests that include fall data or incomplete trials. Copyright © 2012 Elsevier B.V. All rights reserved.

  10. Study on possibility of plasma current profile determination using an analytical model of tokamak equilibrium

    International Nuclear Information System (INIS)

    Moriyama, Shin-ichi; Hiraki, Naoji

    1996-01-01

    The possibility of determining the current profile of tokamak plasma from the external magnetic measurements alone is investigated using an analytical model of tokamak equilibrium. The model, which is based on an approximate solution of the Grad-Shafranov equation, can set a plasma current profile expressed with four free parameters of the total plasma current, the poloidal beta, the plasma internal inductance and the axial safety factor. The analysis done with this model indicates that, for a D-shaped plasma, the boundary poloidal magnetic field prescribing the external magnetic field distribution is dependent on the axial safety factor in spite of keeping the boundary safety factor and the plasma internal inductance constant. This suggests that the plasma current profile is reversely determined from the external magnetic analysis. The possibility and the limitation of current profile determination are discussed through this analytical result. (author)

  11. Diurnal Variations of Equilibrium Factor and Unattached fraction of Radon Progeny in Some Houses and Laboratories

    International Nuclear Information System (INIS)

    Lee, Seung Chan; Kang, Hee Dong; Kim, Chang Kyu; Lee, Dong Myung

    2001-01-01

    The variation characteristics of radon concentration, equilibrium equivalent concentration and equilibrium factor in some house and laboratory buildings have been studied. The variation of equilibrium factor and the unattached fraction of radon progeny with ventilation condition have been also estimated. The averages of radon concentration, equilibrium equivalent concentration and equilibrium factor were 30 Bq m -3 , 19.6 Bq m -3 and 0.65 in seven houses, while 55.0 Bq m -3 , 31.9 Bq m -3 and 0.58 in three laboratory buildings, respectively. The diurnal variation of radon concentration, equilibrium equivalent concentration and equilibrium factor in indoor showed a typical pattern that the radon concentration, equilibrium equivalent concentration and equilibrium factor increased at dawn and morning, while decreased at midday and evening. While the equilibrium factor rate deceased in the indoor environment which was well ventilated, the unattached fraction of radon progeny increased. The equilibrium factor was in proportion to air pressure and humidity of indoor, whereas in inverse proportion to temperature

  12. Determination of toroidal equilibrium parameters from magnetic probe measurements

    International Nuclear Information System (INIS)

    Brynolf, J.; Eriksson, H.G.; Persson, H.; Hellblom, G.

    1992-12-01

    A method has been developed by which the poloidal flux function in the vacuum region between the plasma and the external conductors (and the iron core) can be deduced from external magnetic field measurements. The plasma is in equilibrium and the solution is restricted to plasmas without irregularities. The poloidal field components Bθ and B r are measured at different poloidal positions outside the liner and modelled by truncated Fourier series. The Grad-Shafranov equation in the vacuum region is then solved with these modelled values of Bθ and B r as boundary conditions. (authors)

  13. Evaluation of indoor radon equilibrium factor using CFD modeling and resulting annual effective dose

    Science.gov (United States)

    Rabi, R.; Oufni, L.

    2018-04-01

    The equilibrium factor is an important parameter for reasonably estimating the population dose from radon. However, the equilibrium factor value depended mainly on the ventilation rate and the meteorological factors. Therefore, this study focuses on investigating numerically the influence of the ventilation rate, temperature and humidity on equilibrium factor between radon and its progeny. The numerical results showed that ventilation rate, temperature and humidity have significant impacts on indoor equilibrium factor. The variations of equilibrium factor with the ventilation, temperature and relative humidity are discussed. Moreover, the committed equivalent doses due to 218Po and 214Po radon short-lived progeny were evaluated in different tissues of the respiratory tract of the members of the public from the inhalation of indoor air. The annual effective dose due to radon short lived progeny from the inhalation of indoor air by the members of the public was investigated.

  14. Some measurements of the equilibrium factor for radon daughters in houses

    International Nuclear Information System (INIS)

    Toohey, R.E.; Essling, M.A.; Wang, H.; Rundo, J.

    1982-01-01

    Because the radiation dose to the lung from environmental radon is due almost entirely to the inhalation of the short-lived daughter products, measurements of radon levels alone are not sufficient to determine the dose. Typically the activities of the daughter products in air are not in daughters themselves. The working level (WL) was introduced as a convenient unit to overcome this problem in uranium mines, and it is also applicable to other environments where radiation dosimetry is the principal concern. Since it is easier to determine the radon concentration than the working level, the task of determining lung doses would be simplified if those factors which determine equilibrium could be identified and their effects quantified. In order to do this, simultaneous measurements of radon concentrations and working levels must be made in houses under a variety of conditions. In addition, parameters that may affect the equilibrium factor, such as aerosol concentration and ventilation rate, must also be identified and monitored. Although the effects of such parameters may be best determined under controlled conditions in a laboratory, the results must be validated by measurements in houses. This paper describes these measurements

  15. Variability of radon and thoron equilibrium factors in indoor environment of Garhwal Himalaya

    International Nuclear Information System (INIS)

    Prasad, Mukesh; Rawat, Mukesh; Dangwal, Anoop; Kandari, Tushar; Gusain, G.S.; Mishra, Rosaline; Ramola, R.C.

    2016-01-01

    The measurements of radon, thoron and their progeny concentrations have been carried out in the dwellings of Uttarkashi and Tehri districts of Garhwal Himalaya, India using LR-115 detector based pin-hole dosimeter and DRPS/DTPS techniques. The equilibrium factors for radon, thoron and their progeny were calculated by using the values measured with these techniques. The average values of equilibrium factor between radon and its progeny have been found to be 0.44, 0.39, 0.39 and 0.28 for rainy, autumn, winter and summer seasons, respectively. For thoron and its progeny, the average values of equilibrium factor have been found to be 0.04, 0.04, 0.04 and 0.03 for rainy, autumn, winter and summer seasons, respectively. The equilibrium factor between radon and its progeny has been found to be dependent on the seasonal changes. However, the equilibrium factor for thoron and progeny has been found to be same for rainy, autumn and winter seasons but slightly different for summer season. The annual average equilibrium factors for radon and thoron have been found to vary from 0.23 to 0.80 with an average of 0.42 and from 0.01 to 0.29 with an average of 0.07, respectively. The detailed discussion of the measurement techniques and the explanation for the results obtained is given in the paper. - Highlights: • Equilibrium factors for indoor radon, thoron and their progeny were measured. • Recently developed passive detector techniques were used for measurements. • The values of equilibrium factors are comparable with world's average values. • Equilibrium factor should be measured separately for individual dwelling. • Separate values of equilibrium factors are useful to produce actual radiation dose.

  16. Galvanic Cells and the Determination of Equilibrium Constants

    Science.gov (United States)

    Brosmer, Jonathan L.; Peters, Dennis G.

    2012-01-01

    Readily assembled mini-galvanic cells can be employed to compare their observed voltages with those predicted from the Nernst equation and to determine solubility products for silver halides and overall formation constants for metal-ammonia complexes. Results obtained by students in both an honors-level first-year course in general chemistry and…

  17. Determination of the Tetramer-Dimer Equilibrium Constant of Rabbit ...

    African Journals Online (AJOL)

    Hemoglobin is a tetrameric protein which is able to dissociate into dimers. The dimers can in turn dissociate into tetramers. It has been found that dimers are more reactive than tetramers. The difference in the reactivity of these two species has been used to determine the tetramerdimer dissociation constant of various ...

  18. Lithium isotope separation factors of some two-phase equilibrium systems

    International Nuclear Information System (INIS)

    Palko, A.A.; Drury, J.S.; Begun, G.M.

    1976-01-01

    Isotope separation factors of seventeen two-phase equilibrium systems for lithium isotope enrichment have been determined. In all cases, lithium amalgam was used as one of the lithium-containing phases and was equilibrated with an aqueous or organic phase containing a lithium compound. In all systems examined, isotopic exchange was found to be extremely rapid, and 6 Li was concentrated in the amalgam phase. The isotopic separation factor for the LiOH(aqueous) vs Li(amalgam) system has been studied as a function of temperature from -2 to 80 degreeC. The values obtained have been compared with the ''electrolysis'' and exchange separation factors given in the literature. The two-phase systems, LiCl(ethylenediamine) vs Li(amalgam) and LiCl(propylenediamine) vs Li(amalgam), have been studied, and the isotopic separation factors have been determined as functions of the temperature. The factors for the two systems have been found to be substantially the same (within limits of the errors involved) over the temperature range studied (0 to 100 degreeC) as those for the aqueous system. The isotopic separation factors for the seventeen systems have been tabulated, and correlations have been drawn that show the salt and solvent effects upon the values obtained

  19. Variability of radon and thoron equilibrium factors in indoor environment of Garhwal Himalaya.

    Science.gov (United States)

    Prasad, Mukesh; Rawat, Mukesh; Dangwal, Anoop; Kandari, Tushar; Gusain, G S; Mishra, Rosaline; Ramola, R C

    2016-01-01

    The measurements of radon, thoron and their progeny concentrations have been carried out in the dwellings of Uttarkashi and Tehri districts of Garhwal Himalaya, India using LR-115 detector based pin-hole dosimeter and DRPS/DTPS techniques. The equilibrium factors for radon, thoron and their progeny were calculated by using the values measured with these techniques. The average values of equilibrium factor between radon and its progeny have been found to be 0.44, 0.39, 0.39 and 0.28 for rainy, autumn, winter and summer seasons, respectively. For thoron and its progeny, the average values of equilibrium factor have been found to be 0.04, 0.04, 0.04 and 0.03 for rainy, autumn, winter and summer seasons, respectively. The equilibrium factor between radon and its progeny has been found to be dependent on the seasonal changes. However, the equilibrium factor for thoron and progeny has been found to be same for rainy, autumn and winter seasons but slightly different for summer season. The annual average equilibrium factors for radon and thoron have been found to vary from 0.23 to 0.80 with an average of 0.42 and from 0.01 to 0.29 with an average of 0.07, respectively. The detailed discussion of the measurement techniques and the explanation for the results obtained is given in the paper. Copyright © 2015 Elsevier Ltd. All rights reserved.

  20. Numerical study for determining PF coil system parameters in MHD equilibrium of KT-2 tokamak plasma

    International Nuclear Information System (INIS)

    Ryu, J.; Hong, S.H.; Lee, K.W.; Hong, B.G.; In, S.R.; Kim, S.K.

    1995-01-01

    The KT-2 is a large-aspect-ratio medium-sized divertor tokamak in the conceptual design phase and planned to be operational in 1998 at the Korea Atomic Energy Research Institute (KAERI). Plasma equilibrium in tokamak can be acquired by controlling the current of poloidal field (PF) coils in appropriate geometries and positions. In this study, the authors have performed numerical calculations to achieve the various equilibrium conditions fitting given plasma shapes and satisfying PF current limitations. Usually an ideal magnetohydrodynamic (MHD) equation is used to obtain the equilibrium solution of tokamak plasma, and it is practical to take advantage of a numerical method in solving the MHD equation because it has nonlinear source terms. Two equilibrium codes have been applied to find a double-null configuration of free-boundary tokamak plasma in KT-2: one is of the authors' own developing and the other is a free-boundary tokamak equilibrium code (FBT) that has been used mainly for the verification of developed code's results. PF coil system parameters including their positions and currents are determined for the optimization of input power required when the specifications of KT-2 tokamak are met. Then, several sets of equilibrium conditions during the tokamak operation are found to observe the changes of poloidal field currents with the passing of operation time step, and the basic stability problems related with the magnetic field structure is also considered

  1. Organic tank safety project: Equilibrium moisture determination task. FY 1998 annual progress report

    International Nuclear Information System (INIS)

    Scheele, R.D.; Bredt, P.R.; Sell, R.L.

    1998-08-01

    During fiscal year 1998, PNNL investigated the effect of P H 2 O at or near maximum tank waste surface temperatures on the equilibrium water content of selected Hanford waste samples. These studies were performed to determine how dry organic-bearing wastes will become if exposed to environmental Hanford water partial pressures. The samples tested were obtained from Organic Watch List Tanks. At 26 C, the lowest temperature used, the water partial pressures ranged from 2 to 22 torr. At 41 C, the highest temperature used, the water partial pressures ranged from 3.5 to 48 torr. When the aliquots exposed to the lowest and highest water partial pressures reached their equilibrium or near-equilibrium water contents, they were exchanged to determine if hysteresis occurred. In some experiments, once equilibrated, aliquots not used in the hysteresis experiments were allowed to equilibrate at room temperature (23 C) until the hysteresis experiments ended; this provides a measure of the effect of temperature

  2. [Determination of equilibrium solubility and n-octanol/water partition coefficient of pulchinenosiden D by HPLC].

    Science.gov (United States)

    Rao, Xiao-Yong; Yin, Shan; Zhang, Guo-Song; Luo, Xiao-Jian; Jian, Hui; Feng, Yu-Lin; Yang, Shi-Lin

    2014-05-01

    To determine the equilibrium solubility of pulchinenosiden D in different solvents and its n-octanol/water partition coefficients. Combining shaking flask method and high performance liquid chromatography (HPLC) to detect the n-octanol/water partition coefficients of pulchinenosiden D, the equilibrium solubility of pulchinenosiden D in six organic solvents and different pH buffer solution were determined by HPLC analysis. n-Octanol/water partition coefficients of pulchinenosiden D in different pH were greater than zero, the equilibrium solubility of pulchinenosiden D was increased with increase the pH of the buffer solution. The maximum equilibrium solubility of pulchinenosiden D was 255.89 g x L(-1) in methanol, and minimum equilibrium solubility of pulchinenosiden D was 0.20 g x L(-1) in acetonitrile. Under gastrointestinal physiological conditions, pulchinenosiden D exists in molecular state and it has good absorption but poor water-solubility, so increasing the dissolution rate of pulchinenosiden D may enhance its bioavailability.

  3. Long-term measurements of equilibrium factor with electrochemically etched CR-39 SSNTD

    International Nuclear Information System (INIS)

    Ng, F.M.F.; Nikezic, D.; Yu, K.N.

    2007-01-01

    Recently, our group proposed a method (proxy equilibrium factor method) using a bare LR 115 detector for long-term monitoring of the equilibrium factor. Due to the presence of an upper alpha-particle energy threshold for track formation in the LR 115 detector, the partial sensitivities to 222 Rn, 218 Po and 214 Po were the same, which made possible measurements of a proxy equilibrium factor F p that was well correlated with the equilibrium factor. In the present work, the method is extended to CR-39 detectors which have better-controlled etching properties but do not have an upper energy threshold. An exposed bare CR-39 detector is first pre-etched in 6.25 N NaOH solution at 70 o C for 6 h, and then etched electrochemically in a 6.25 N NaOH solution with ac voltage of 400 V (peak to peak) and 5 kHz applied across the detectors for 1 h at room temperature. Under these conditions, for tracks corresponding to incident angles larger than or equal to 50 deg., the treeing efficiency is 0% and 100% for incident energies smaller than and larger than 4 MeV, respectively. A simple method is then proposed to obtain the total number of tracks formed below the upper energy threshold of 4 MeV, from which the proxy equilibrium factor method can apply

  4. Study of ion exchange equilibrium and determination of heat of ion exchange by ion chromatography

    International Nuclear Information System (INIS)

    Liu Kailu; Yang Wenying

    1996-01-01

    Ion chromatography using pellicularia ion exchange resins and dilute solution can be devoted to the study of ion exchange thermodynamics and kinetics. Ion exchange equilibrium equation was obtained, and examined by the experiments. Based on ion exchange equilibrium, the influence of eluent concentration and resin capacity on adjusted retention volumes was examined. The effect of temperature on adjusted retention volumes was investigated and heats of ion exchange of seven anions were determined by ion chromatography. The interaction between anions and skeleton structure of resins were observed

  5. Determination of equilibrium composition of thermally ionized monoatomic gas under different physical conditions

    Science.gov (United States)

    Romanova, M. S.; Rydalevskaya, M. A.

    2017-05-01

    Perfect gas mixtures that result from thermal ionization of spatially and chemically homogeneous monoatomic gases are considered. Equilibrium concentrations of the components of such mixtures are determined using integration over the momentum space and summation with respect to energy levels of the distribution functions that maximize the entropy of system under condition for constancy of the total number of nuclei and electrons. It is demonstrated that such a method allows significant simplification of the calculation of the equilibrium composition for ionized mixtures at different temperatures and makes it possible to study the degree of ionization of gas versus gas density and number in the periodic table of elements.

  6. Determination of solute organic concentration in contaminated soils using a chemical-equilibrium soil column system

    DEFF Research Database (Denmark)

    Gamst, Jesper; Kjeldsen, Peter; Christensen, Thomas Højlund

    2007-01-01

    using two soils with different content of organic carbon (f(oc) of 1.5 and 6.5%, respectively). A quadruple blind test of the ER-V system using glass beads in stead of soil showed an acceptable recovery (65-85%) of all of the 11 VOCs tested. Only for the most volatile compound (heptane, K-H similar...... to 80) an unacceptable recovery was found (9%). The contact time needed for obtaining chemical equilibrium was tested in the ER-H system by performing five test with different duration (1, 2, 4, 7 and 19 days) using the low organic carbon soil. Seven days of contact time appeared sufficient...... for determination of solute concentration in a contaminated soil were developed; (1) a chemical Equilibrium and Recirculation column test for Volatile organic chemicals (ER-V) and (2) a chemical Equilibrium and Recirculation column test for Hydrophobic organic chemicals (ER-H). The two test systems were evaluated...

  7. On the influence of environmental factors on radon levels in caves of Ribeira valley state parks, SP and evaluation of radioactive equilibrium and equilibrium factor between radon and its progeny

    International Nuclear Information System (INIS)

    Alberigi, Simone

    2011-01-01

    In the present study it was carried out the monitoring of radon in caves distributed among three state parks of Sao Paulo. The radon concentration were determinate in Morro Preto and Santana caves, located at PETAR - Parque Estadual Turistico do Alto Ribeira (High Ribeira River Tourist State Park), Diabo cave, situated in PEJ - Parque Estadual de Jacupiranga (Jacupiranga State Park) and Colorida cave located in PEI - Parque Estadual Intervales (Intervales State Park PEI). The monitoring covered measurements between April 2009 and June 2010. Radon concentrations were carried out by using the technique of passive detection with CR-39 solid state nuclear track detectors and NRPB diffusion chambers. The detectors were exposed in periods ranging from 30 to 150 days. Radon concentrations varied from 132 Bq/m 3 to 9456 Bq/m 3 . The values of radon concentrations were analyzed together with information about rainfall and internal and external temperature values of the Santana cave environment and regional literature values for a possible relationship between radon variations and weather information. Both the determinations of 22 '6Ra in water samples collected in some caves and rivers and radon emanation from a stalactite collected at Santana cave allowed to verify that the radon in the caves comes from the walls rocks. The verification of the radioactive equilibrium between 222 Rn, 218 Po and '2 14 Po in the exposed detectors was prejudiced by the high tracks densities, committing the methodology effectiveness. The annual effective dose was calculated for three values obtained from the literature for the equilibrium factor. Considering the most realistic scenario, with equilibrium factor of 0.5 and 52 working weeks, the annual effective dose was 5.1 mSv/y. Concerning the worst scenario, which simulates an extreme case, adopting an equilibrium factor equal to 1 and 52 weeks of work per year, the annual effective dose is 10.2 mSv/y. Also with information received from a

  8. Estimation of radon progeny equilibrium factors and their uncertainty bounds using solid state nuclear track detectors

    International Nuclear Information System (INIS)

    Eappen, K.P.; Mayya, Y.S.; Patnaik, R.L.; Kushwaha, H.S.

    2006-01-01

    For the assessment of inhalation doses due to radon and its progeny to uranium mine workers, it is necessary to have information on the time integrated gas concentrations and equilibrium factors. Passive single cup dosimeters using solid state nuclear track detectors (SSNTD) are best suited for this purpose. These generally contain two SSNTDs, one placed inside the cup to measure only the radon gas concentration and other outside the cup for recording tracks due to both radon gas and the progeny species. However, since one obtains only two numbers by this method whereas information on four quantities is required for an unambiguous estimation of dose, there is a need for developing an optimal methodology for extracting information on the equilibrium factors. Several techniques proposed earlier have essentially been based on deterministic approaches, which do not fully take into account all the possible uncertainties in the environmental parameters. Keeping this in view, a simple 'mean of bounds' methodology is proposed to extract equilibrium factors based on their absolute bounds and the associated uncertainties as obtained from general arguments of radon progeny disequilibrium. This may be considered as reasonable estimates of the equilibrium factors in the absence of a knowledge of fluctuation in the environmental variables. The results are compared with those from direct measurements both in the laboratory and in real field situations. In view of the good agreement found between these, it is proposed that the simple mean of bounds estimate may be useful for practical applications in inhalation dosimetry of mine workers

  9. Determination of equilibrium humidities using temperature and humidity controlled X-ray diffraction (RH-XRD)

    International Nuclear Information System (INIS)

    Linnow, Kirsten; Steiger, Michael

    2007-01-01

    Confined growth of crystals in porous building materials is generally considered to be a major cause of damage. We report on the use of X-ray diffraction under controlled conditions of temperature and relative humidity (RH-XRD) for the investigation of potentially deleterious phase transition reactions. An improved procedure based on rate measurements is used for the accurate and reproducible determination of equilibrium humidities of deliquescence and hydration reactions. The deliquescence humidities of NaCl (75.4 ± 0.5% RH) and Ca(NO 3 ) 2 .4H 2 O (50.8 ± 0.7% RH) at 25 deg. C determined with this improved RH-XRD technique are in excellent agreement with available literature data. Measurement of the hydration of anhydrous Ca(NO 3 ) 2 to form Ca(NO 3 ) 2 .2H 2 O revealed an equilibrium humidity of 10.2 ± 0.3%, which is also in reasonable agreement with available data. In conclusion, dynamic X-ray diffraction measurements are an appropriate method for the accurate and precise determination of equilibrium humidities with a number of interesting future applications

  10. The quasi-equilibrium response of MOS structures: Quasi-static factor

    Science.gov (United States)

    Okeke, M.; Balland, B.

    1984-07-01

    The dynamic response of a MOS structure driven into a non-equilibrium behaviour by a voltage ramp is presented. In contrast to Khun's quasi-static technique it is shown that any ramp-driven MOS structure has some degree of non-equilibrium. A quasi staticity factor μAK which serves as a measure of the degree of quasi-equilibrium, has been introduced for the first time. The mathematical model presented in the paper allows a better explanation of the experimental recordings. It is shown that this model could be used to analyse the various features of the response of the structure and that such physical parameters as the generation-rate, trap activation energy, and the effective capture constants could be obtained.

  11. Precise equilibrium structure determination of hydrazoic acid (HN3) by millimeter-wave spectroscopy

    International Nuclear Information System (INIS)

    Amberger, Brent K.; Esselman, Brian J.; Woods, R. Claude; McMahon, Robert J.; Stanton, John F.

    2015-01-01

    The millimeter-wave spectrum of hydrazoic acid (HN 3 ) was analyzed in the frequency region of 235-450 GHz. Transitions from a total of 14 isotopologues were observed and fit using the A-reduced or S-reduced Hamiltonian. Coupled-cluster calculations were performed to obtain a theoretical geometry, as well as rotation-vibration interaction corrections. These calculated vibration-rotation correction terms were applied to the experimental rotational constants to obtain mixed theoretical/experimental equilibrium rotational constants (A e , B e , and C e ). These equilibrium rotational constants were then used to obtain an equilibrium (R e ) structure using a least-squares fitting routine. The R e structural parameters are consistent with a previously published R s structure, largely falling within the uncertainty limits of that R s structure. The present R e geometric parameters of HN 3 are determined with exceptionally high accuracy, as a consequence of the large number of isotopologues measured experimentally and the sophisticated (coupled-cluster theoretical treatment (CCSD(T))/ANO2) of the vibration-rotation interactions. The R e structure exhibits remarkable agreement with the CCSD(T)/cc-pCV5Z predicted structure, validating both the accuracy of the ab initio method and the claimed uncertainties of the theoretical/experimental structure determination

  12. Algorithm based on the Thomson problem for determination of equilibrium structures of metal nanoclusters

    Science.gov (United States)

    Arias, E.; Florez, E.; Pérez-Torres, J. F.

    2017-06-01

    A new algorithm for the determination of equilibrium structures suitable for metal nanoclusters is proposed. The algorithm performs a stochastic search of the minima associated with the nuclear potential energy function restricted to a sphere (similar to the Thomson problem), in order to guess configurations of the nuclear positions. Subsequently, the guessed configurations are further optimized driven by the total energy function using the conventional gradient descent method. This methodology is equivalent to using the valence shell electron pair repulsion model in guessing initial configurations in the traditional molecular quantum chemistry. The framework is illustrated in several clusters of increasing complexity: Cu7, Cu9, and Cu11 as benchmark systems, and Cu38 and Ni9 as novel systems. New equilibrium structures for Cu9, Cu11, Cu38, and Ni9 are reported.

  13. Long-run equilibrium relationships in the international stock market factor systems

    Directory of Open Access Journals (Sweden)

    Hyung-Suk Choi

    2014-06-01

    Full Text Available The main objective of this paper is to investigate the international linkages among local, country-specific stock market factors in order to better understand the dependence structure of increasingly integrated world financial markets. The seeming discordance between Fama and French (1998 and Griffin (2002 regarding the multi-factor model in the international stock markets motivates us to study the international relationship among local factors. With the individual stock data from the six major developed countries in the international stock market, we compose daily returns to the Fama-French three factors (i.e. market, size, and value and the momentum factor over the period from January 2000 to June 2010. We investigate the international linkages among local stock market factors, focusing on their equilibrium relationship in the integrated world financial market. The cointegration analysis indicates that local factor indices, constructed from the cumulative factor returns, are cointegrated for each of the four factor classes. Thus, we conclude that local factors are globally bound to each other through a long-run equilibrium relationship and that although stock market factors may be local, rather than global, individual stock returns are driven by common global stochastic trends.

  14. Determination of equilibrium constants of formation and decomposition of 11-tungstophosphate heteropolyanion by the method of Raman spectroscopy

    International Nuclear Information System (INIS)

    Detusheva, L.G.; Khankhasaeva, S.Ts.; Yurchenko, Eh.N.; Lazarenko, T.P.; Kozhevnikov, I.V.

    1990-01-01

    Method of quantitative IR spectroscopy was used to determine equilibrium constants of formation of H x PW 11 O 39 (7-x)- (1) from H y P 2 W 21 O 71 (6-Y)- and W 10 O 32 4- at pH 2.8-4.0 and its decomposition at pH 7-8. Equilibrium constant of (1) formation in logarithmic coordinates changes linearly with growth of initial concentration of H 3 PW 12 O 40 (2) from 0.005 to 0.1 mol/l. Equilibrium constant of (1) decomposition is characterized by complex dependence on initial concentration of (2) due to proceeding of parallel reactions. Equilibrium concentrations of compounds in solutions of tungstophosphoric heteropolyacid at pH 3.25 and 7.68, calculated according to determined equilibrium constants and determined by the method of NMR on 31 P nuclei, were correlated

  15. Factors determining UK album success

    OpenAIRE

    Elliott, Caroline; Simmons, Robert

    2011-01-01

    This article uses a recently compiled dataset on the UK album sales to determine which factors contribute to best-selling album sales success. We control for factors including length of time since release, nationality of artist, artist type and album type, testing the increasing returns to information hypothesis. Information on general public online review scores for the albums in the dataset allows for a strong test of the accuracy of online reviews in predicting music sales, as online revie...

  16. Domestic Environmental Policy and International Factor Mobility: A General Equilibrium Analysis

    OpenAIRE

    Stefan Felder; Reto Schleiniger

    1995-01-01

    This paper studies the conditions under which a green tax reform not only benefits the environment but also enhances the efficiency of the tax system. The focus is on the consequences of international factor mobility for the scope of a double dividend. The investigation of the double-dividend claim is based on a general equilibrium model of a stylised small open economy. The simulations of equal-yield tax reform scenarios indicate that an environmental tax on consumption yields a double divid...

  17. An Iterative Algorithm to Determine the Dynamic User Equilibrium in a Traffic Simulation Model

    Science.gov (United States)

    Gawron, C.

    An iterative algorithm to determine the dynamic user equilibrium with respect to link costs defined by a traffic simulation model is presented. Each driver's route choice is modeled by a discrete probability distribution which is used to select a route in the simulation. After each simulation run, the probability distribution is adapted to minimize the travel costs. Although the algorithm does not depend on the simulation model, a queuing model is used for performance reasons. The stability of the algorithm is analyzed for a simple example network. As an application example, a dynamic version of Braess's paradox is studied.

  18. Determination of the partition coefficient between dissolved organic carbon and seawater using differential equilibrium kinetics.

    Science.gov (United States)

    Kim, Du Yung; Kwon, Jung-Hwan

    2018-05-04

    Because the freely dissolved fraction of highly hydrophobic organic chemicals is bioavailable, knowing the partition coefficient between dissolved organic carbon and water (K DOCw ) is crucial to estimate the freely dissolved fraction from the total concentration. A kinetic method was developed to obtain K DOCw that required a shorter experimental time than equilibrium methods. The equilibrium partition coefficients of four polychlorinated biphenyls (PCBs) (2,4,4'-trichlorobiphenyl (PCB 28), 2,2',3,5'-tetrachlorobiphenyl (PCB 44), 2,2',4,5,5'-pentachlorobiphenyl (PCB 101), and 2,2',4,4',5,5'-hexachlorobiphenyl (PCB 153)) between dissolved organic carbon and seawater (K DOCsw ) were determined using seawater samples from the Korean coast. The log K DOCsw values of PCB 28 were measured by equilibrating PCB 28, the least hydrophobic congener, with seawater samples, and the values ranged from 6.60 to 7.20. For the more hydrophobic PCBs (PCB 44, PCB 101, and PCB 153), kinetic experiments were conducted to determine the sorption rate constants (k 2 ) and their log K DOCsw values were obtained by comparing their k 2 with that of PCB 28. The calculated log K DOCsw values were 6.57-7.35 for PCB 44, 6.23-7.44 for PCB 101, and 6.35-7.73 for PCB 153. The validity of the proposed method was further confirmed using three less hydrophobic polycyclic aromatic hydrocarbons. This kinetic method shortened the experimental time to obtain the K DOCsw values of the more hydrophobic PCBs, which did not reach phase equilibrium. Copyright © 2018 Elsevier Ltd. All rights reserved.

  19. Determination of Thermal Equilibrium in a Sealed Cell Based on Optical Depth

    Energy Technology Data Exchange (ETDEWEB)

    Zou, Sheng; Zhang, Hong; Chen, Xi-yuan [Southeast University, Nanjing (China); Shan, Guang-cun; Quan, Wei [Beihang University, Beijing (China)

    2017-01-15

    An effective method based on optical depth (OD) is presented to measure thermal equilibrium in a cell. First, the principle of determining the temperature distribution in the cell by using the OD is demonstrated. Subsequently, relevant experiments are carried out. Original experimental results showed that some gradients of OD distributions in the cell at different wavelengths and variations of the OD increased slowly along the direction of motion of the beam at a fixed wavelength. At a wavelength of 766.6839 nm, which is about 7 GHz blue shifted with respect to the potassium resonance, the average value of the OD was about 0.764 and the maximal and the minimum inhomogeneity biases among all location points were about 6.07% and 0.56%, respectively. As for the corresponding wavelengths of 766.67785 nm and 766.73004 nm, some deviations from previous results, which were caused by different absorptions of the alkali-metal atoms at different frequencies of the laser beam, were observed. The nonuniform OD values along the direction of motion of the beam reflected an inhomogeneous distribution of the temperature in the cell, which may have been caused by layout of the oven. When the layout of the oven was modified, comparative experiments comparable to these with the previous layout of the oven demonstrated that the uniformity of the temperature distribution in the cell was improved and that thermal equilibrium time was shorter by about 10 minutes. This method played an important role in determining the thermal equilibrium time in the cell.

  20. Determining energy and climate market policy using multiobjective programs with equilibrium constraints

    International Nuclear Information System (INIS)

    Siddiqui, Sauleh; Christensen, Adam

    2016-01-01

    Energy and climate market policy is inherently multiobjective and multilevel, in that desired choices often conflict and are made at a higher level than influenced actors. Analyzing tradeoff between reducing emissions and keeping fuel prices low, while seeking compromise among producers, traders, and consumers is the crux of the policy problem. This paper aims to address this issue by combining multiobjective optimization problems, which allow the study of tradeoff between choices, with equilibrium problems that model the networks and players over which these policies are chosen, to produce a formulation called a Multiobjective Program with Equilibrium Constraints. We apply this formulation to the United States renewable fuel market to help understand why it has been so difficult in releasing the 2014 mandate for the RFS (Renewable Fuel Standard). The RFS ensures that a minimum volume of renewable fuel is included in transportation fuel sold in the United States. Determining the RFS volume requirements involves anticipating market reaction as well as balancing policy objectives. We provide policy alternatives to aid in setting these volume obligations that are applicable to a wide variety of climate and energy market settings and explain why the RFS is not an optimal policy for reducing emissions. - Highlights: • First time a MOPEC has been used to model energy markets and climate policy. • Method to endogenously determine energy policy along with associated tradeoff. • Computationally efficient algorithm for MOPECs and compare to methods. • Explain why the RFS is not an optimal policy for emission reduction.

  1. The influence of the working conditions on the equilibrium factor F and the unattached fraction fp

    International Nuclear Information System (INIS)

    Streil, T.; Reichert, A.

    1998-01-01

    The influence is reported of working conditions on dose estimation, in particular the equilibrium factor and the unattached fraction. For instance in a cabinet-maker's shop the radon concentration is strongly influenced by the ventilation system. The F factor is affected by dust producing work processes. For a better knowledge of radon dosimetry, the unattached fraction of radon progeny has to be measured continuously and separately. Preliminary results are presented obtained with a monitor containing three alpha detector microsystems measuring radon in the air, attached radon daughters and unattached radon daughters. The system was tested in buildings, caves, mines, waterworks and other places

  2. Ice-vapor equilibrium fractionation factor of hydrogen and oxygen isotopes

    DEFF Research Database (Denmark)

    Ellehøj, Mads Dam; Steen-Larsen, Hans Christian; Johnsen, Sigfus Johann

    2013-01-01

    RATIONALE: The equilibrium fractionation factors govern the relative change in the isotopic composition during phase transitions of water. The commonly used results, which were published more than 40 years ago, are limited to a minimum temperature of -33 degrees C. This limits the reliability...... values, with a temperature dependency in accordance with theory for equilibrium fractionation. We obtain the following expressions for the temperature dependency of the fractionation coefficients: ln(alpha(delta 2H)) = 0.2133 - 203.10/T + 48888/T-2 ln(alpha(delta 18O)) = 0.0831 - 49.192/T + 8312.5/T2...... Compared with previous experimental work, a significantly larger for H-2 is obtained while, for O-18, is larger for temperatures below -20 degrees C and slightly lower for temperatures above this. CONCLUSIONS: Using the new values for alpha, a Rayleigh distillation model shows significant changes in both...

  3. Dose estimation by simultaneous measurement of the radon/thoron concentration and the equilibrium factors in air using a passive dosemeter

    International Nuclear Information System (INIS)

    Urban, M.

    1984-03-01

    Responsible for an increased radiation exposure is the inhalation of radon and its short lived daughters. A time integrating passive dosemeter was developed to determine the concentrations of the radon isotopes as well as their equilibrium factors. The α energy spectrum inside a dosemeter is measured by means of a nuclear track detector. The concentrations in air and the equilibrium factors are calculated by using a new mathematical dosemeter model. A small pilot study in houses was done to test the dosemeter. (orig.) [de

  4. Determining Factors of Subsidiary Development

    DEFF Research Database (Denmark)

    Pedersen, Torben

    (the depth of activities) and level of integration in the internal MNC-network. Birkinshaw and Hood (1998a) have in their seminal paper proposed a model where subsidiary development is determined by three factors: Headquarter assignment, dynamism of local business environment and subsidiary initiatives......Subsidiary development is a multi-dimensional construct that cannot be captured just by looking at subsidiary roles, activities, etc. Three distinct dimensions of subsidiary development are identified and these are: scope of subsidiary (the breadth of activities), level of subsidiary competence....... This paper is the first to conduct a statistical test of this model on a large-sample data set including data of more than 2.100 subsidiaries located in seven different countries in Europe. The effect of the three determining factors on subsidiary development is tested simultaneously in a LISREL model....

  5. Determination of the UO2-ZrO2-BaO equilibrium diagram

    International Nuclear Information System (INIS)

    Paschoal, J.O.A.; Kleykanp, H.; Thuemmler, F.

    1984-01-01

    It is determined the equilibrium diagram of UO 2 - ZrO 2 - BaO to interpret and predict changes in the chemical properties of ceramic (oxide) nuclear fuels during irradiation. The isothermal section of the system at 1700 0 C was determined experimentally, utilizing the techniques of ceramography, X-ray diffraction analysis, microprobe analysis and differential thermal analysis. The solid solubility limits at 1700 0 C between UO 2 and ZrO 2 , UO 2 and BaO, ZrO 2 and BaO, ZrO 2 and BaO and BaUO 3 and BaZrO 3 is presented. The influence of oxygen potential in relation to the different phases is discussed and the phase diagram of the system presented. (M.C.K.) [pt

  6. Estimation of equilibrium factors of radon and its progeny using SSNTDs in the various dwellings of Hyderabad, Andhra Pradesh, India

    International Nuclear Information System (INIS)

    Yadagiri Reddy, P.; Rama Reddy, K.; Sreenath Reddy, M.

    2013-01-01

    In the estimation of effective dose in the indoor environment due to Radon and its progeny the equilibrium factor (F) plays a significant role. It is the radioactive equilibrium between radon and its short-lived decay products. Generally in the dose estimation is made taking the equilibrium factor 0.4 (UNSCEAR value) for the radon and its progeny. But in practice the concentration of radon and its progeny vary significantly with local environmental conditions and time, subsequently the equilibrium factor F also changes and hence affects the effective dose estimation of a particular dwelling. Therefore the UNSCEAR F value does not reflect the actual effective doses. Therefore, the present study is carried out to estimate the equilibrium factors in different types of dwellings in the urban Hyderabad using SSNTDs. It is found that, the equilibrium factors in the urban Hyderabad vary from 0.01 to 0.71 with an average 0.32 ± 0.23. The average F values of urban Hyderabad relatively lower than Indian average and global average. The reasons for the lower equilibrium factor values in the study area have been discussed in this paper. (author)

  7. The fractioning factor and the number of theorical plates in isotopic enrichment columns determined simultaneously

    International Nuclear Information System (INIS)

    Ducatti, Carlos

    1997-01-01

    Using an analytical approach and an analytical graphical method, it was determined simultaneously the fractioning factor and the number of theoretical plates in isotopic enrichment columns during the conditions of dinamical isotopic equilibrium. (author). 5 refs., 2 figs., 2 tabs

  8. Determine equilibrium dissociation constant of drug-membrane receptor affinity using the cell membrane chromatography relative standard method.

    Science.gov (United States)

    Ma, Weina; Yang, Liu; Lv, Yanni; Fu, Jia; Zhang, Yanmin; He, Langchong

    2017-06-23

    The equilibrium dissociation constant (K D ) of drug-membrane receptor affinity is the basic parameter that reflects the strength of interaction. The cell membrane chromatography (CMC) method is an effective technique to study the characteristics of drug-membrane receptor affinity. In this study, the K D value of CMC relative standard method for the determination of drug-membrane receptor affinity was established to analyze the relative K D values of drugs binding to the membrane receptors (Epidermal growth factor receptor and angiotensin II receptor). The K D values obtained by the CMC relative standard method had a strong correlation with those obtained by the frontal analysis method. Additionally, the K D values obtained by CMC relative standard method correlated with pharmacological activity of the drug being evaluated. The CMC relative standard method is a convenient and effective method to evaluate drug-membrane receptor affinity. Copyright © 2017 Elsevier B.V. All rights reserved.

  9. Possibility of rapidly reporting 226Ra activity in 226Ra-222Rn samples with unknown equilibrium factor by γ spectrometer

    Institute of Scientific and Technical Information of China (English)

    SU Qiong; ZHENG Rui; CHEN Yong; CHENG Jian-Ping

    2004-01-01

    This paper reports the observed changes for equilibrium factors between 226Ra and 222Rn with sealing time of the samples. The samples include soil, raw coal, mineral water, cement, rock, etc. Especially the conceptions of "pre-equilibrium time" and "pre-equilibrium factor" have been put forward and methods of measuring and processing data have been given which can be used for rapidly reporting activity of 226Ra in samples with unknown equilibrium factor. It is definitely concluded that, using methods given in the paper, a test report will be completed in 3~7days, instead of one month, after receiving the sample whose activity is not lower than LLD of the spectrometer.

  10. Neuronal factors determining high intelligence.

    Science.gov (United States)

    Dicke, Ursula; Roth, Gerhard

    2016-01-05

    Many attempts have been made to correlate degrees of both animal and human intelligence with brain properties. With respect to mammals, a much-discussed trait concerns absolute and relative brain size, either uncorrected or corrected for body size. However, the correlation of both with degrees of intelligence yields large inconsistencies, because although they are regarded as the most intelligent mammals, monkeys and apes, including humans, have neither the absolutely nor the relatively largest brains. The best fit between brain traits and degrees of intelligence among mammals is reached by a combination of the number of cortical neurons, neuron packing density, interneuronal distance and axonal conduction velocity--factors that determine general information processing capacity (IPC), as reflected by general intelligence. The highest IPC is found in humans, followed by the great apes, Old World and New World monkeys. The IPC of cetaceans and elephants is much lower because of a thin cortex, low neuron packing density and low axonal conduction velocity. By contrast, corvid and psittacid birds have very small and densely packed pallial neurons and relatively many neurons, which, despite very small brain volumes, might explain their high intelligence. The evolution of a syntactical and grammatical language in humans most probably has served as an additional intelligence amplifier, which may have happened in songbirds and psittacids in a convergent manner. © 2015 The Author(s).

  11. Radiological characterisation and radon equilibrium factor in the outdoor air of a post-industrial urban area

    International Nuclear Information System (INIS)

    Rozas, S.; Idoeta, R.; Alegría, N.; Herranz, M.

    2016-01-01

    The radiological characterisation of outdoor air is always a complicated task due to the several radioactive emissions coming from the different radionuclides and also because of the very short half-lives of radionuclides in the natural radioactive series. In some places, this characterisation could result in unusual values because the natural presence of radionuclides with terrestrial origin can be modified by manmade activities. Nonetheless, this characterisation is useful not only for air quality control purposes but also because radon and its progeny in the outdoor air are the main contributors to human exposure from natural sources. In this study, we have carried out air particle sampling, followed by gamma-ray spectrometry, alpha spectrometry and beta counting determinations for this purpose. Subsequently, the outdoor air has been radiologically characterised through the obtained data and using a pre-existing analytical method to take into account the radioactive decays of short half-life radionuclides during sampling, sample preparation and measuring times. Bilbao was chosen to carry out this work. It is a medium-sized town located in northern Spain, close to the Atlantic Ocean and at sea level. This city has a recent industrial past as there were numerous steel mills and other heavy industries, including some quarries, and some open pit mines close to it, which concluded in a remediation program. So, it is a place where the air is potentially modified by manmade activities. The obtained results show that activity concentration values for long-lived radionuclides that precede radon and thoron are in the order of 10 −6  Bq m −3 and long-lived ones after radon are around 10 −4  Bq m −3 . Thoron progeny are around 2 × 10 −2  Bq m −3 and radon progeny are around 1.8 Bq m −3 . The mean radon equilibrium factor was 0.18. All of these values are close to the minimum UNSCEAR values, but show some variability, which highlights the importance

  12. Ventilation rate in equilibrium factor measurements with solid state nuclear track detectors (SSNTD)

    International Nuclear Information System (INIS)

    Gil, L.R.; Leitao, R.M.S.; Marques, A.; Rivera, A.

    1994-08-01

    Ventilation rate values are calculated from track density measurements in solid state nuclear track detectors (SSNTD), both when ventilation is the main cause of radioactive disequilibrium in radon progeny and when it shares importance with other agents. The method consists in exposing a SSNTD of high intrinsic efficiency (CR-39) in filtered and unfiltered conditions and, in addition, covered with a thin Aluminium foil, to stop alpha particles from 218 Po and 222 Rn. No calibrations are required but, when necessary, independent measurements of the loss rates of radioactivity to aerosol and to walls have to perform. Ventilation rates depend upon geometry detection efficiencies for alpha particles, here obtained by Monte Carlo simulation, taking into account the space distribution of emission positions. This may lead to sizeable corrections in ventilation and equilibrium factor values. Since geometric detection efficiencies depend upon alpha-particle ranges in air, the influences of barometric variables are also discussed. (author). 7 refs

  13. Weak Acid Ionization Constants and the Determination of Weak Acid-Weak Base Reaction Equilibrium Constants in the General Chemistry Laboratory

    Science.gov (United States)

    Nyasulu, Frazier; McMills, Lauren; Barlag, Rebecca

    2013-01-01

    A laboratory to determine the equilibrium constants of weak acid negative weak base reactions is described. The equilibrium constants of component reactions when multiplied together equal the numerical value of the equilibrium constant of the summative reaction. The component reactions are weak acid ionization reactions, weak base hydrolysis…

  14. Equilibrium sampling to determine the thermodynamic potential for bioaccumulation of persistent organic pollutants from sediment.

    Science.gov (United States)

    Jahnke, Annika; MacLeod, Matthew; Wickström, Håkan; Mayer, Philipp

    2014-10-07

    Equilibrium partitioning (EqP) theory is currently the most widely used approach for linking sediment pollution by persistent hydrophobic organic chemicals to bioaccumulation. Most applications of the EqP approach assume (I) a generic relationship between organic carbon-normalized chemical concentrations in sediments and lipid-normalized concentrations in biota and (II) that bioaccumulation does not induce levels exceeding those expected from equilibrium partitioning. Here, we demonstrate that assumption I can be obviated by equilibrating a silicone sampler with chemicals in sediment, measuring chemical concentrations in the silicone, and applying lipid/silicone partition ratios to yield concentrations in lipid at thermodynamic equilibrium with the sediment (CLip⇌Sed). Furthermore, we evaluated the validity of assumption II by comparing CLip⇌Sed of selected persistent, bioaccumulative and toxic pollutants (polychlorinated biphenyls (PCBs) and hexachlorobenzene (HCB)) to lipid-normalized concentrations for a range of biota from a Swedish background lake. PCBs in duck mussels, roach, eel, pikeperch, perch and pike were mostly below the equilibrium partitioning level relative to the sediment, i.e., lipid-normalized concentrations were ≤CLip⇌Sed, whereas HCB was near equilibrium between biota and sediment. Equilibrium sampling allows straightforward, sensitive and precise measurement of CLip⇌Sed. We propose CLip⇌Sed as a metric of the thermodynamic potential for bioaccumulation of persistent organic chemicals from sediment useful to prioritize management actions to remediate contaminated sites.

  15. Determination of Students' Alternative Conceptions about Chemical Equilibrium: A Review of Research and the Case of Turkey

    Science.gov (United States)

    Ozmen, Haluk

    2008-01-01

    This study aims to determine prospective science student teachers' alternative conceptions of the chemical equilibrium concept. A 13-item pencil and paper, two-tier multiple choice diagnostic instrument, the Test to Identify Students' Alternative Conceptions (TISAC), was developed and administered to 90 second-semester science student teachers…

  16. A Computational Method for Determining the Equilibrium Composition and Product Temperature in a LH2/LOX Combustor

    Science.gov (United States)

    Sozen, Mehmet

    2003-01-01

    In what follows, the model used for combustion of liquid hydrogen (LH2) with liquid oxygen (LOX) using chemical equilibrium assumption, and the novel computational method developed for determining the equilibrium composition and temperature of the combustion products by application of the first and second laws of thermodynamics will be described. The modular FORTRAN code developed as a subroutine that can be incorporated into any flow network code with little effort has been successfully implemented in GFSSP as the preliminary runs indicate. The code provides capability of modeling the heat transfer rate to the coolants for parametric analysis in system design.

  17. Long-term Radon Levels and Equilibrium Factor in Some Spanish Workplaces Measured with a Passive Integrating Detector

    International Nuclear Information System (INIS)

    Baixeras, C.; Amgarou, K.; Font, Ll.; Domingo, C.

    1999-01-01

    The measurement of long-term radon levels and equilibrium factor is important to estimate the annual averaged dose due to radon progeny inhalation indoors. According to the European Union directive 96/26/EURATOM it is necessary to control the radon level in workplaces. This paper presents the radon concentration and equilibrium factor values obtained in some workplaces from the Barcelona area with a passive integrating dosemeter exposed for two months. The dosemeter consists of two Makrofol-DE nuclear etched track foils, one within a diffusion chamber and the other one bare, allowing the separated measurement of 222 Rn (C 0 ) and 214 Po (C 4 ) activity concentration respectively. The equilibrium factor is estimated from the disequilibrium degree (k 4 = C 4 /C 0 ). A description of the dosemeter and the methodology used, and an estimation of the annual dose received for the workers at the different workplaces are presented. (author)

  18. Equilibrium Sampling to Determine the Thermodynamic Potential for Bioaccumulation of Persistent Organic Pollutants from Sediment

    DEFF Research Database (Denmark)

    Jahnke, Annika; MacLeod, Matthew; Wickström, Håkan

    2014-01-01

    Equilibrium partitioning (EqP) theory is currently the most widely used approach for linking sediment pollution by persistent hydrophobic organic chemicals to bioaccumulation. Most applications of the EqP approach assume (I) a generic relationship between organic carbon-normalized chemical...... chemical concentrations in the silicone, and applying lipid/silicone partition ratios to yield concentrations in lipid at thermodynamic equilibrium with the sediment (CLip⇌Sed). Furthermore, we evaluated the validity of assumption II by comparing CLip⇌Sed of selected persistent, bioaccumulative and toxic...... organic chemicals from sediment useful to prioritize management actions to remediate contaminated sites....

  19. NMR spectroscopic determination of an equilibrium isotope effect on the hydration of cobalt(II)

    International Nuclear Information System (INIS)

    Evilia, R.F.; Saunders, M.

    1985-01-01

    A recently reported NMR method for the measurement of deuterium equilibrium isotope effects is applied to the hydration of the paramagnetic cobalt(II) ion. An isotope effect of about 1.3% is measured. A substantial difference between the intrinsic shift of H 2 O and D 2 O when coordinated to cobalt is also measured

  20. Protein binding studies with radiolabeled compounds containing radiochemical impurities. Equilibrium dialysis versus dialysis rate determination

    DEFF Research Database (Denmark)

    Honoré, B

    1987-01-01

    The influence of radiochemical impurities in dialysis experiments with high-affinity ligands is investigated. Albumin binding of labeled decanoate (97% pure) is studied by two dialysis techniques. It is shown that equilibrium dialysis is very sensitive to the presence of impurities resulting...

  1. Equilibrium Sampling of Persistent and Bioaccumulative Compounds in Soil and Sediment: Comparison of Two Approaches To Determine Equilibrium Partitioning Concentrations in Lipids

    DEFF Research Database (Denmark)

    Mäenpää, Kimmo; Leppänen, Matti T.; Reichenberg, Fredrik

    2011-01-01

    with respect to equilibrium partitioning concentrations in lipids (Clipid,partitioning): (i) Solid phase microextraction in the headspace above the sample (HS-SPME) required optimization for its application to PCBs, and it was calibrated above external partitioning standards in olive oil. (ii) Equilibrium...

  2. Factors determining lumber recovery in sawmilling

    Science.gov (United States)

    Philip H. Steele

    1984-01-01

    Lumber volume recovery in sawmilling is determined by a confusing interaction of several factors. The more one knows about each individual factor, the more one can understand how the factors interact. The author identifies and discusses in detail seven factors influencing lumber recovery. Past and current research is cited, and examples are given to illustrate the...

  3. Colorimetric Determination of the Iron(III)-Thiocyanate Reaction Equilibrium Constant with Calibration and Equilibrium Solutions Prepared in a Cuvette by Sequential Additions of One Reagent to the Other

    Science.gov (United States)

    Nyasulu, Frazier; Barlag, Rebecca

    2011-01-01

    The well-known colorimetric determination of the equilibrium constant of the iron(III-thiocyanate complex is simplified by preparing solutions in a cuvette. For the calibration plot, 0.10 mL increments of 0.00100 M KSCN are added to 4.00 mL of 0.200 M Fe(NO[subscript 3])[subscript 3], and for the equilibrium solutions, 0.50 mL increments of…

  4. Determination of the Equilibrium Constants of a Weak Acid: An Experiment for Analytical or Physical Chemistry

    Science.gov (United States)

    Bonham, Russell A.

    1998-05-01

    A simple experiment, utilizing readily available equipment and chemicals, is described. It allows students to explore the concepts of chemical equilibria, nonideal behavior of aqueous solutions, least squares with adjustment of nonlinear model parameters, and errors. The relationship between the pH of a solution of known initial concentration and volume of a weak acid as it is titrated by known volumes of a monohydroxy strong base is developed rigorously assuming ideal behavior. A distinctive feature of this work is a method that avoids dealing with the problems presented by equations with multiple roots. The volume of base added is calculated in terms of a known value of the pH and the equilibrium constants. The algebraic effort involved is nearly the same as the alternative of deriving a master equation for solving for the hydrogen ion concentration or activity and results in a more efficient computational algorithm. This approach offers two advantages over the use of computer software to solve directly for the hydrogen ion concentration. First, it avoids a potentially lengthy iterative procedure encountered when the polynomial exceeds third order in the hydrogen ion concentration; and second, it provides a means of obtaining results with a hand calculator that can prove useful in checking computer code. The approach is limited to weak solutions to avoid dealing with molalities and to insure that the Debye-Hückel limiting law is applicable. The nonlinear least squares algorithm Nonlinear Fit, found in the computational mathematics library Mathematica, is utilized to fit the measured volume of added base to the calculated value as a function of the measured pH subject to variation of all the equilibrium constants as parameters (including Kw). The experiment emphasizes both data collection and data analysis aspects of the problem. Data for the titration of phosphorous acid, H3PO3, by NaOH are used to illustrate the approach. Fits of the data without corrections

  5. Examining the Competition for Forest Resources in Sweden Using Factor Substitution Analysis and Partial Equilibrium Modelling

    Energy Technology Data Exchange (ETDEWEB)

    Olsson, Anna

    2011-07-01

    The overall objective of the thesis is to analyse the procurement competition for forest resources in Sweden. The thesis consists of an introductory part and two self-contained papers. In paper I a translog cost function approach is used to analyse the factor substitution in the sawmill industry, the pulp and paper industry and the heating industry in Sweden over the period 1970 to 2008. The estimated parameters are used to calculate the Allen and Morishima elasticities of substitution as well as the price elasticities of input demand. The utilisation of forest resources in the energy sector has been increasing and this increase is believed to continue. The increase is, to a large extent, caused by economic policies introduced to reduce the emission of greenhouse gases. Such policies could lead to an increase in the procurement competition between the forest industries and the energy sector. The calculated substitution elasticities indicate that it is easier for the heating industry to substitutes between by-products and logging residues than it is for the pulp and paper industry to substitute between by-products and roundwood. This suggests that the pulp and paper industry could suffer from an increase in the procurement competition. However, overall the substitutions elasticities estimated in our study are relatively low. This indicates that substitution possibilities could be rather limited due to rigidities in input prices. This result suggests that competition of forest resources also might be relatively limited. In paper II a partial equilibrium model is constructed in order to asses the effects an increasing utilisation of forest resources in the energy sector. The increasing utilisation of forest fuel is, to a large extent, caused by economic policies introduced to reduce the emission of greenhouse gases. In countries where forests already are highly utilised such policies will lead to an increase in the procurement competition between the forest sector and

  6. Determining equilibrium osmolarity in poly(ethylene glycol)/chondrotin sulfate gels mimicking articular cartilage.

    Science.gov (United States)

    Sircar, S; Aisenbrey, E; Bryant, S J; Bortz, D M

    2015-01-07

    We present an experimentally guided, multi-phase, multi-species polyelectrolyte gel model to make qualitative predictions on the equilibrium electro-chemical properties of articular cartilage. The mixture theory consists of two different types of polymers: poly(ethylene gylcol) (PEG), chondrotin sulfate (ChS), water (acting as solvent) and several different ions: H(+), Na(+), Cl(-). The polymer chains have covalent cross-links whose effect on the swelling kinetics is modeled via Doi rubber elasticity theory. Numerical studies on equilibrium polymer volume fraction and net osmolarity (difference in the solute concentration across the gel) show a complex interplay between ionic bath concentrations, pH, cross-link fraction and the average charge per monomer. Generally speaking, swelling is aided due to a higher average charge per monomer (or a higher particle fraction of ChS, the charged component of the polymer), low solute concentration in the bath, a high pH or a low cross-link fraction. A peculiar case arises at higher values of cross-link fraction, where it is observed that increasing the average charge per monomer leads to gel deswelling. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. GEOMORPHIC AND HYDROLOGIC INTERACTIONS IN THE DETERMINATION OF EQUILIBRIUM SOIL DEPTH

    Science.gov (United States)

    Nicotina, L.; Rinaldo, A.; Tarboton, D. G.

    2009-12-01

    In this work we propose numerical studies of the interactions between hydrology and geomorphology in the formation of the actual soil depth that drives ecologic and hydrologic processes. Sediment transport and geomorphic landscape evolution processes (i.e. erosion/deposition vs. soil production) strongly influence hydrology, carbon sequestration, soil formation and stream water chemistry. The process of rock conversion into soil originates a strong hydrologic control through the formation of the soil depth that participates to hydrologic processes, influence vegetation type and patterns and actively participate in the co-evolution mechanisms that shape the landscape. The description of spatial patterns in hydrology is usually constrained by the availability of field data, especially when dealing with quantities that are not easily measurable. In these circumstances it is deemed fundamental the capability of deriving hydrologic boundary conditions from physically based approaches. Here we aim, in a general framework, at the formulation of an integrated approach for the prediction of soil depth by mean of i) soil production models and ii) geomorphic transport laws. The processes that take place in the critical zone are driven by the extension of it and have foundamental importance over short time scales as well as on geologic time scales (i.e. as biota affects climate that drives hydrology and thus contributes on shaping the landscape). Our study aims at the investigation of the relationships between soil depth, topography and runoff production, we also address the mechanisms that bring to the development of actual patterns of soil depths which at the same time influence runoff. We use a schematic representation of the hydrologic processes that relies on the description of the topography (throuh a topographic wetness index) and the spatially variable soil depths. Such a model is applied in order to investigate the development of equilibrium soil depth patterns under

  8. Chemical Principles Revisited: Chemical Equilibrium.

    Science.gov (United States)

    Mickey, Charles D.

    1980-01-01

    Describes: (1) Law of Mass Action; (2) equilibrium constant and ideal behavior; (3) general form of the equilibrium constant; (4) forward and reverse reactions; (5) factors influencing equilibrium; (6) Le Chatelier's principle; (7) effects of temperature, changing concentration, and pressure on equilibrium; and (8) catalysts and equilibrium. (JN)

  9. Determination, at equilibrium, of association constants of labelled or unlabelled ligands by a non-graphical method

    International Nuclear Information System (INIS)

    Goertz, G.; Longchampt, J.; Crepy, O.; Judas, O.; Jayle, M.-F.

    1976-01-01

    Determination, at equilibrium of association constants of labelled or unlabelled ligands by a non-graphical method are described. This work deals with the determination of association constants at equilibrium by a non-graphical method in binding systems containing one specific receptor. Equations have been derived from that originally described by Lea (Biochim. Biophys. Acta, 322, 68-74), the terms of which are obtained from the data of simple displacement curves of a bound radioactive ligand by unlabelled competitors identical or different in nature. By knowing the function relating the variations of the bound ligand (B) to the affinity constant (Ksub(i)) and the quantity (Msub(i)) of competitor for a given system, it is possible to calculate any of these parameters when the two others are measured. Thus, it becomes easy to compare the relative affinities of different receptors for the same ligand or that of one receptor for various labelled or unlabelled ligands. Furthermore, theoretical displacement curves can be drawn and compared to experimental data, only when knowing the affinity constant of a specific binding system in given conditions. These modes of calculation have been tested in a study of interactions between various steroids and a fraction of human serum proteins precipitated by ammonium sulfate (30-45%) and containing the sex hormone-binding globulin. Association constants thus obtained agree well with those reported in the literature and determined by graphical procedures

  10. On the influence of environmental factors on radon levels in caves of Ribeira valley state parks, SP and evaluation of radioactive equilibrium and equilibrium factor between radon and its progeny; Sobre a influencia de fatores ambientais nos niveis de radonio em cavernas dos parques estaduais do vale do Ribeira, SP e avaliacao do equilibrio radioativo e fator de equilibrio entre radonio e seus descendentes

    Energy Technology Data Exchange (ETDEWEB)

    Alberigi, Simone

    2011-07-01

    In the present study it was carried out the monitoring of radon in caves distributed among three state parks of Sao Paulo. The radon concentration were determinate in Morro Preto and Santana caves, located at PETAR - Parque Estadual Turistico do Alto Ribeira (High Ribeira River Tourist State Park), Diabo cave, situated in PEJ - Parque Estadual de Jacupiranga (Jacupiranga State Park) and Colorida cave located in PEI - Parque Estadual Intervales (Intervales State Park PEI). The monitoring covered measurements between April 2009 and June 2010. Radon concentrations were carried out by using the technique of passive detection with CR-39 solid state nuclear track detectors and NRPB diffusion chambers. The detectors were exposed in periods ranging from 30 to 150 days. Radon concentrations varied from 132 Bq/m{sup 3} to 9456 Bq/m{sup 3}. The values of radon concentrations were analyzed together with information about rainfall and internal and external temperature values of the Santana cave environment and regional literature values for a possible relationship between radon variations and weather information. Both the determinations of {sup 22}'6Ra in water samples collected in some caves and rivers and radon emanation from a stalactite collected at Santana cave allowed to verify that the radon in the caves comes from the walls rocks. The verification of the radioactive equilibrium between {sup 222}Rn, {sup 218}Po and '2{sup 14}Po in the exposed detectors was prejudiced by the high tracks densities, committing the methodology effectiveness. The annual effective dose was calculated for three values obtained from the literature for the equilibrium factor. Considering the most realistic scenario, with equilibrium factor of 0.5 and 52 working weeks, the annual effective dose was 5.1 mSv/y. Concerning the worst scenario, which simulates an extreme case, adopting an equilibrium factor equal to 1 and 52 weeks of work per year, the annual effective dose is 10.2 m

  11. Absolute determination of the gelling point of gelatin under quasi-thermodynamic equilibrium.

    Science.gov (United States)

    Bellini, Franco; Alberini, Ivana; Ferreyra, María G; Rintoul, Ignacio

    2015-05-01

    Thermodynamic studies on phase transformation of biopolymers in solution are useful to understand their nature and to evaluate their technological potentials. Thermodynamic studies should be conducted avoiding time-related phenomena. This condition is not easily achieved in hydrophilic biopolymers. In this contribution, the simultaneous effects of pH, salt concentration, and cooling rate (Cr) on the folding from random coil to triple helical collagen-like structures of gelatin were systematically studied. The phase transformation temperature at the absolute invariant condition of Cr = 0 °C/min (T(T)Cr=0) ) is introduced as a conceptual parameter to study phase transformations in biopolymers under quasi-thermodynamic equilibrium and avoiding interferences coming from time-related phenomena. Experimental phase diagrams obtained at different Cr are presented. The T(T)(Cr=0) compared with pH and TT(Cr=0) compared with [NaCl] diagram allowed to explore the transformation process at Cr = 0 °C/min. The results were explained by electrostatic interactions between the biopolymers and its solvation milieu. © 2015 Institute of Food Technologists®

  12. Experimental determination of order in non-equilibrium solids using colloidal gels

    International Nuclear Information System (INIS)

    Gao Yongxiang; Kilfoil, Maria

    2004-01-01

    The idea of quantifying order in disordered systems has been introduced recently by Torquato and co-workers (2000 Phys. Rev. E 62 993-1001). We are interested in the application of this idea to measure structure in non-equilibrium systems. Here we focus on gels, using as a model system colloidal gels formed from hard spheres with polymer added to the systems to induce a controlled, weak attraction. To describe the structure of the gels we use real space imaging via confocal microscopy to obtain the full three-dimensional structure. We measure experimentally both translational order and bond angle correlations, defining a new (refined) translational order parameter that is sensitive to long range order in these non-random packings. This metric is also sensitive to anisotropy, which should be important in the many physical situations where an external force is present. The bond angle distribution shows coordinated organization. To give a clearer physical picture for gels, we compare the experimental data to computer generated hard sphere systems

  13. Cone Penetrometer N Factor Determination Testing Results

    Energy Technology Data Exchange (ETDEWEB)

    Follett, Jordan R.

    2014-03-05

    This document contains the results of testing activities to determine the empirical 'N Factor' for the cone penetrometer in kaolin clay simulant. The N Factor is used to releate resistance measurements taken with the cone penetrometer to shear strength.

  14. Equilibrium Partitioning Sediment Benchmarks (ESBs) for the Protection of Benthic Organisms: Procedures for the Determination of the Freely Dissolved Interstitial Water Concentrations of Nonionic Organics

    Science.gov (United States)

    This document describes procedures to determine the concentrations of nonionic organic chemicals in sediment interstitial waters. In previous ESB documents, the general equilibrium partitioning (EqP) approach was chosen for the derivation of sediment benchmarks because it account...

  15. Determination of the equilibrium constant of FeZrCl6 formation from FeCl3 and ZrCl4

    International Nuclear Information System (INIS)

    Berdonosov, S.S.; Kharisov, B.I.; Nikitin, M.I.

    1992-01-01

    Equilibrium pressures of chlorine formed in the course of reaction FeCl 3 +ZrCl 4 ↔ FeZrCl 6 +0.5 Cl 2 were determined at the temperatures of 250-325 deg C. The values of equilibrium constant K p of the reaction mentioned at the temperatures of 250, 275, 300 and 325 deg were calculated, taking into consideration the determined values of p Cl2 and literature data on equilibrium pressures of ZrCl 4 and FeCl 3 vapours

  16. Validation of attenuation-corrected equilibrium radionuclide angiographic determinations of right ventricular volume: comparison with cast-validated biplane cineventriculography

    International Nuclear Information System (INIS)

    Dell'Italia, L.J.; Starling, M.R.; Walsh, R.A.; Badke, F.R.; Lasher, J.C.; Blumhardt, R.

    1985-01-01

    To determine the accuracy of attenuation-corrected equilibrium radionuclide angiographic determinations of right ventricular volumes, the authors initially studied 14 postmortem human right ventricular casts by water displacement and biplane cineventriculography. Biplane cineventriculographic right ventricular cast volumes, calculated by a modification of Simpson's rule algorithm, correlated well with right ventricular cast volumes measured by water displacement (r = .97, y = 8 + 0.88x, SEE = 6 ml). Moreover, the mean volumes obtained by both methods were no different (73 +/- 28 vs 73 +/- 25 ml). Subsequently, they studied 16 patients by both biplane cineventriculography and equilibrium radionuclide angiography. The uncorrected radionuclide right ventricular volumes were calculated by normalizing background corrected end-diastolic and end-systolic counts from hand-drawn regions of interest obtained by phase analysis for cardiac cycles processed, frame rate, and blood sample counts. Attenuation correction was performed by a simple geometric method. The attenuation-corrected radionuclide right ventricular end-diastolic volumes correlated with the cineventriculographic end-diastolic volumes (r = .91, y = 3 + 0.92x, SEE = 27 ml). Similarly, the attenuation-corrected radionuclide right ventricular end-systolic volumes correlated with the cineventriculographic end-systolic volumes (r = .93, y = - 1 + 0.91x, SEE = 16 ml). Also, the mean attenuation-corrected radionuclide end-diastolic and end-systolic volumes were no different than the average cineventriculographic end-diastolic and end-systolic volumes (160 +/- 61 and 83 +/- 44 vs 170 +/- 61 and 86 +/- 43 ml, respectively)

  17. Determinación de la humedad de equilibrio en panela Equilibrium humidity determination in molases (panela

    Directory of Open Access Journals (Sweden)

    Macias Esparza Belisario

    1990-12-01

    Full Text Available El objetivo del presente estudio fue determinar los mejores estados atmosféricos para el almacenamiento de la panela analizando el contenido de humedad de equilibrio del edulcorante, a unas condiciones estables de temperatura y humedad relativa. Utilizando regresión lineal para el análisis
    de los datos, se obtuvo una ecuación multivariable de tipo exponencial, aplicable para regiones que poseen ternepratu ras entre 13°C y 34°C y humedades relativas entre 60% y 90%. la panela tal como se produce actualmente, con contenidos de humedad entre 80% y 10% base húmeda, solo podrá almacenarse durante períodos muy cortos de tiempo. Para perradas más largos, la panela debe almacenarse en condiciones ambientales que garanticen humedades de equilibrio inferiores al 7%.The aim of the present research was to establish the best environmental conditions related to the storage, over a long
    period of time, for panela (unrefined brown sugar blocksL
    In order to define those conditions, it was necessary to determine equilibrium moisture curves related to a range of temperature between 13°C and 34°C, and a relative humidity range between 60Ofo and 90%, which covers the environmental conditions of many panela's production regions. A linear regression analysis was applied to obtain a multi-variable equation which allows the definition of equilibrium moisture curves, mentioned above. Actual panela's moisture content (8% to 10% on wet basis, allows its storage only, for a short time under temperature and
    relative humidity ranges normally founded in production regions in order to prolong it, storage room environmental conditions must be adjusted to obtain an equilibrium moisture
    content of 7% meximum.

  18. Development of a model using the MATLAB System identification toolbox to estimate 222Rn equilibrium factor from CR-39 based passive measurements

    International Nuclear Information System (INIS)

    Abo-Elmagd, M.; Sadek, A.M.

    2014-01-01

    Can and Bare method is a widely used passive method for measuring the equilibrium factor F through the determination of the track density ratio between bare (D) and filtered (D o ) detectors. The dimensions of the used diffusion chamber are altering the deposition ratios of Po-isotopes on the chamber walls as well as the ratios of the existing alpha emitters in air. Then the measured filtered track density and therefore the resultant equilibrium factor is changed according to the diffusion chamber dimensions. For this reason, high uncertainty was expected in the measured F using different diffusion chambers. In the present work, F is derived as a function of both track density ratio (D/D o ) and the dimensions of the used diffusion chambers (its volume to the total internal surface area; V/A). The accuracy of the derived formula was verified using the black-box modeling technique via the MATLAB System identification toolbox. The results show that the uncertainty of the calculated F by using the derived formula of F (D/D o , V/A) is only 5%. The obtained uncertainty ensures the quality of the derived function to calculate F using diffusion chambers with wide range of dimensions. - Highlights: • The manuscript is aimed to develop the Can and Bare method for measuring the equilibrium factor F. • A new formula F (D/D o , V/A) is obtained taking the dimension of the used cup (V/A) into consideration. • The accuracy of the derived formula was verified using the black-box modeling technique via the MATLAB. • The derived function covers the range of the widely used diffusion chambers (r ≤ 3.5 cm and h ≤ 10 cm). • The reproducibility of F estimated using this model is quite good (5% deviation) for different 8 cups

  19. Experimental determination and thermodynamic modeling of phase equilibrium and protein partitioning in aqueous two-phase systems containing biodegradable salts

    International Nuclear Information System (INIS)

    Perez, Brenda; Malpiedi, Luciana Pellegrini; Tubío, Gisela; Nerli, Bibiana; Alcântara Pessôa Filho, Pedro de

    2013-01-01

    Highlights: ► Binodal data of systems (water + polyethyleneglycol + sodium) succinate are reported. ► Pitzer model describes the phase equilibrium of systems formed by polyethyleneglycol and biodegradable salts satisfactorily. ► This simple thermodynamic framework was able to predict the partitioning behaviour of model proteins acceptably well. - Abstract: Phase diagrams of sustainable aqueous two-phase systems (ATPSs) formed by polyethyleneglycols (PEGs) of different average molar masses (4000, 6000, and 8000) and sodium succinate are reported in this work. Partition coefficients (Kps) of seven model proteins: bovine serum albumin, catalase, beta-lactoglobulin, alpha-amylase, lysozyme, pepsin, urease and trypsin were experimentally determined in these systems and in ATPSs formed by the former PEGs and other biodegradable sodium salts: citrate and tartrate. An extension of Pitzer model comprising long and short-range term contributions to the excess Gibbs free energy was used to describe the (liquid + liquid) equilibrium. Comparison between experimental and calculated tie line data showed mean deviations always lower than 3%, thus indicating a good correlation. The partition coefficients were modeled by using the same thermodynamic approach. Predicted and experimental partition coefficients correlated quite successfully. Mean deviations were found to be lower than the experimental uncertainty for most of the assayed proteins.

  20. Non-equilibrium hydrogen exchange for determination of H-bond strength and water accessibility in solid proteins.

    Science.gov (United States)

    Grohe, Kristof; Movellan, Kumar Tekwani; Vasa, Suresh Kumar; Giller, Karin; Becker, Stefan; Linser, Rasmus

    2017-05-01

    We demonstrate measurement of non-equilibrium backbone amide hydrogen-deuterium exchange rates (HDX) for solid proteins. The target of this study are the slowly exchanging residues in solid samples, which are associated with stable secondary-structural elements of proteins. These hydrogen exchange processes escape methods measuring equilibrium exchange rates of faster processes. The method was applied to a micro-crystalline preparation of the SH3 domain of chicken α-spectrin. Therefore, from a 100% back-exchanged micro-crystalline protein preparation, the supernatant buffer was exchanged by a partially deuterated buffer to reach a final protonation level of approximately 20% before packing the sample in a 1.3 mm rotor. Tracking of the HN peak intensities for 2 weeks reports on site-specific hydrogen bond strength and also likely reflects water accessibility in a qualitative manner. H/D exchange can be directly determined for hydrogen-bonded amides using 1 H detection under fast magic angle spinning. This approach complements existing methods and provides the means to elucidate interesting site-specific characteristics for protein functionality in the solid state.

  1. Functional and physical molecular size of the chicken hepatic lectin determined by radiation inactivation and sedimentation equilibrium analysis

    International Nuclear Information System (INIS)

    Steer, C.J.; Osborne, J.C. Jr.; Kempner, E.S.

    1990-01-01

    Radiation inactivation and sedimentation equilibrium analysis were used to determine the functional and physical size of the chicken hepatic membrane receptor that binds N-acetylglucosamine-terminated glycoproteins. Purified plasma membranes from chicken liver were irradiated with high energy electrons and assayed for 125I-agalactoorosomucoid binding. Increasing the dose of ionizing radiation resulted in a monoexponential decay in binding activity due to a progressive loss of binding sites. The molecular mass of the chicken lectin, determined in situ by target analysis, was 69,000 +/- 9,000 Da. When the same irradiated membranes were solubilized in Brij 58 and assayed, the binding protein exhibited a target size of 62,000 +/- 4,000 Da; in Triton X-100, the functional size of the receptor was 85,000 +/- 10,000 Da. Sedimentation equilibrium measurements of the purified binding protein yielded a lower limit molecular weight of 79,000 +/- 7,000. However, the solubilized lectin was detected as a heterogeneous population of oligomers with molecular weights as high as 450,000. Addition of calcium or calcium plus N-acetylglucosamine decreased the higher molecular weight species, but the lower limit molecular weights remained invariant. Similar results were determined when the chicken lectin was solubilized in Brij 58, C12E9, or 3-[(3-cholamidopropyl)dimethylammonio]-1-propane-sulfonic acid (CHAPS). Results from the present study suggest that in the plasma membrane, the functional species of the chicken hepatic lectin exists as a trimer. However, in detergent solution, the purified receptor forms a heterogeneous population of irreversible oligomers that exhibit binding activity proportional to size

  2. Equilibrium Trust

    OpenAIRE

    Luca Anderlini; Daniele Terlizzese

    2009-01-01

    We build a simple model of trust as an equilibrium phenomenon, departing from standard "selfish" preferences in a minimal way. Agents who are on the receiving end of an other to transact can choose whether to cheat and take away the entire surplus, taking into account a "cost of cheating." The latter has an idiosyncratic component (an agent's type), and a socially determined one. The smaller the mass of agents who cheat, the larger the cost of cheating suffered by those who cheat. Depending o...

  3. Feed/meat transfer factor determination

    International Nuclear Information System (INIS)

    Hoepfner, U.

    1981-01-01

    The transfer of cesium from the feed to bovine meat is taken as an example to discuss natural environmental conditions and their effects on the determination of the transfer factor. Criteria for estimating the validity of experimentally determined transfer factors are given and used for a critical evaluation of significant literature data. The evaluation presented in this report is not a merely statistical evaluation of transfer data, indicating one single value as the correct one (sometimes within a certain margin), but rather scans the data available for incertainties and drawbacks of the experimental methods applied, finally stating a range of variation within which transfer factors can be considered to be correct. (orig./DG) [de

  4. Use of the nonsteady monotonic heating method for complex determination of thermophysical properties of chemically reacting mixture in the case of non-equilibrium proceeding of the chemical reaction

    International Nuclear Information System (INIS)

    Serebryanyj, G.Z.

    1984-01-01

    Theoretical analysis is made for the monotonic heating method as applied for complex determination of thermophysical properties of chemically reacting gases. The possibility is shown of simultaneous determination of frozen and equilibrium heat capacity, frozen and equilibrium heat conduction provided non-equilibrium occuring of the reaction in the wide range of temperatures and pressures. The monotonic heating method can be used for complex determination of thermophysical properties of chemically reacting systems in case of non-equilibrium proceeding of the chemical reaction

  5. Development of a model using the MATLAB System identification toolbox to estimate (222)Rn equilibrium factor from CR-39 based passive measurements.

    Science.gov (United States)

    Abo-Elmagd, M; Sadek, A M

    2014-12-01

    Can and Bare method is a widely used passive method for measuring the equilibrium factor F through the determination of the track density ratio between bare (D) and filtered (Do) detectors. The dimensions of the used diffusion chamber are altering the deposition ratios of Po-isotopes on the chamber walls as well as the ratios of the existing alpha emitters in air. Then the measured filtered track density and therefore the resultant equilibrium factor is changed according to the diffusion chamber dimensions. For this reason, high uncertainty was expected in the measured F using different diffusion chambers. In the present work, F is derived as a function of both track density ratio (D/Do) and the dimensions of the used diffusion chambers (its volume to the total internal surface area; V/A). The accuracy of the derived formula was verified using the black-box modeling technique via the MATLAB System identification toolbox. The results show that the uncertainty of the calculated F by using the derived formula of F (D/Do, V/A) is only 5%. The obtained uncertainty ensures the quality of the derived function to calculate F using diffusion chambers with wide range of dimensions. Copyright © 2014 Elsevier Ltd. All rights reserved.

  6. DETERMINANT FACTORS OF STUDENTS ENTREPRENEURSHIP INTENTION

    Directory of Open Access Journals (Sweden)

    Renny Dwijayanti

    2018-04-01

    Full Text Available The purpose of this study is to determine and analyze the dominant factor as a determinant of the entrepreneurship intent of the students of the Department of Economic Education of the State University of Surabaya.This research uses explanatory research method, the sample used is 166 students from the total population of 286 students with purposiverandom sampling technique. The results showed that locus of control, subjective norms, and entrepreneurial attitudes affect the intention of student entrepreneurship. From the three determining variables of the entrepreneurship intentions, there is one dominant variable as determinant of student entrepreneurship intention, it is locus of control. The locus of control of students related to entrepreneurship is a personal belief in the success gained from the business and learning process. The implication of this research is students need to strengthen the formation ofentrepreneurial mindset to be able to grow their self-confidence on their own potentials.

  7. Adsorption of reactive blue BF-5G dye by soybean hulls: kinetics, equilibrium and influencing factors.

    Science.gov (United States)

    Honorio, Jacqueline Ferandin; Veit, Márcia Teresinha; Gonçalves, Gilberto da Cunha; de Campos, Élvio Antonio; Fagundes-Klen, Márcia Regina

    2016-01-01

    The textile industry is known for the high use of chemicals, such as dyes, and large volumes of effluent that contaminate waters, a fact that has encouraged research and improved treatment techniques. In this study, we used unprocessed soybean hulls for the removal of reactive blue BF-5G dye. The point of zero charge of soybean hulls was 6.76. Regarding the speed of agitation in the adsorption process, the resistance to mass transfer that occurs in the boundary layer was eliminated at 100 rpm. Kinetics showed an experimental amount of dye adsorbed at equilibrium of 57.473 mg g(-1) obtained under the following conditions: dye initial concentration = 400 mg L(-1); diameter of particle = 0.725 mm; dosage = 6 g L(-1); pH 2; 100 rpm; temperature = 30 °C; and duration of 24 hours. The pseudo-second order best showed the dye removal kinetics. The adsorption isotherms performed at different temperatures (20, 30, 40 and 50 °C) showed little variation in the concentration range assessed, being properly adjusted by the Langmuir isotherm model. The maximum capacity of dye adsorption was 72.427 mg g(-1) at 30 °C. Since soybean hull is a low-cost industrial byproduct, it proved to be a potential adsorbent for the removal of the textile dye assessed.

  8. Determination of some radiative view factors

    International Nuclear Information System (INIS)

    Ghosh, B.; Mukhopadhyay, D.; Lele, H.G.; Fichot, F.; Guillard, G.

    2011-01-01

    View factors are essential components for analysis for of radiative heat transfer through enclosure methods like radiosity approach, direct/total exchange area approach etc. View factor is defined as the integral over the interacting surface. View factor integral can be calculated by following various approaches, such as: view factor algebra, direction analytical approach, contour integration method, Monte Carlo method, numerical methods based of FDM or FEM, Hottle's string method etc. The present module of work on determination of view factor is aimed for use in ASTEC code system for severe accident analysis. There exist many routines (RADB, RADC, GRADEB, RADR, RADL) in the ICARE module of ASTEC code system to model radiative heat transfer from different types of assemblies of interacting surfaces of different nature. The present work is specially targeted for radiative heat transfer model for lower plenum (RADILOWE) and for extension of ICARE module for IPHWR. In interacting surfaces within the lower plenum comprises of different types of circular, cylindrical and conical surface. In the work completed so far, view factor relations have been derived/compiled based on exact/approximate analytical and numerical approaches. (author)

  9. Determination of Equilibrium Constant and Relative Brightness in FRET-FCS by Including the Third-Order Correlations.

    Science.gov (United States)

    Meng, Lingyi; He, Shanshan; Zhao, Xin Sheng

    2017-12-21

    Fluorescence correlation spectroscopy (FCS) encodes the information on the equilibrium constant (K), the relative fluorescence brightness of fluorophore (Q), and the forward and backward reaction rate constants (k + and k - ) on a physical or chemical relaxation. However, it has been a long-standing problem to completely resolve the FCS data to get the thermodynamic and kinetic information. Recently, we have solved the problem for fluorescence autocorrelation spectroscopy (FACS). Here, we extend the method to fluorescence cross-correlation spectroscopy (FCCS), which appears when FCS is coupled with fluorescence resonance energy transfer (FRET). Among 12 total second-order and third-order pre-exponential factors in a relaxation process probed by the FRET-FCS technique, 3 are independent. We presented and discussed 3 sets of explicit solutions to use these pre-exponential factors to calculate K and Q. Together with the relaxation time, the acquired K will allow people to obtain k + and k - , so that the goal of deciphering the FRET-FCS data will be fully reached. The theory is verified by extensive computer simulations and tested experimentally on a system of oligonucleotide hybridization.

  10. Local multiboson factorization of the quark determinant

    Energy Technology Data Exchange (ETDEWEB)

    Ce, Marco [Mainz Univ. (Germany). Helmholtz-Institut; Scuola Normale Superiore, Pisa (Italy); INFN, Sezione di Pisa (Italy); Giusti, Leonardo [CERN, Geneva (Switzerland). Theoretical Physics Dept.; Milano-Bicocca Univ., Milano (Italy). Dipt. di Fisica; INFN, Sezione di Milano Bicocca, Milano (Italy); Schaefer, Stefan [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany). John von Neumann-Inst. fuer Computing NIC

    2017-11-15

    We discuss the recently proposed multiboson domain-decomposed factorization of the gauge-field dependence of the fermion determinant in lattice QCD. In particular, we focus on the case of a lattice divided in an arbitrary number of thick time slices. As a consequence, multiple space-time regions can be updated independently. This allows to address the exponential degradation of the signal-to-noise ration of correlation functions with multilevel Monte Carlo sampling. We show numerical evidence of the effectiveness of a two-level integration for pseudoscalar propagators with momentum and for vector propagators, in a two active regions setup. These results are relevant to lattice computation of the hadronic contributions to the anomalous magnetic moment of the muon and to heavy meson decay form factors.

  11. Attached, unattached fraction of progeny concentrations and equilibrium factor for dose assessments from {sup 222}Rn and {sup 220}Rn

    Energy Technology Data Exchange (ETDEWEB)

    Singh, Parminder; Saini, Komal; Bajwa, Bikramjit Singh [Guru Nanak Dev University, Department of Physics, Amritsar, Punjab (India); Mishra, Rosaline; Sahoo, Bijay Kumar [Bhabha Atomic Research Centre, Radiological Physics and Advisory Division, Mumbai (India)

    2016-08-15

    In this study, measurements of indoor radon ({sup 222}Rn), thoron ({sup 220}Rn) and their equilibrium equivalent concentration (EEC) were carried out in 96 dwellings from 22 different villages situated in Hamirpur district, Himachal Pradesh, India, by using LR-115 type II-based pinhole twin cup dosimeters and deposition-based progeny sensors (DRPS/DTPS). The annual average indoor {sup 222}Rn and {sup 220}Rn concentrations observed in these dwellings were 63.82 and 89.59 Bq/m{sup 3}, respectively, while the average EEC (attached + unattached) for {sup 222}Rn and {sup 220}Rn was 29.28 and 2.74 Bq/m{sup 3}. For {sup 222}Rn (f{sub Rn}) and {sup 220}Rn (f{sub Tn}), the average values of unattached fraction were 0.11 and 0.09, respectively. The equilibrium factors for radon (F{sub Rn}) and thoron (F{sub Tn}) varied from 0.12 to 0.77 with an average of 0.50, and from 0.01 to 0.34 with an average of 0.05, respectively. The annual inhalation dose due to mouth and nasal breathing was calculated using dose conversion factors and unattached fractions. The indoor annual effective doses for {sup 222}Rn (AEDR) and {sup 220}Rn (AEDT) were found to be 1.92 and 0.83 mSv a{sup -1}, respectively. The values of {sup 222}Rn/{sup 220}Rn concentrations and annual effective doses obtained in the present study are within the safe limits as recommended by the International Commission on Radiological Protection for indoor dwelling exposure conditions. (orig.)

  12. Methods for determining radionuclide retardation factors: status report

    International Nuclear Information System (INIS)

    Relyea, J.F.; Serne, R.J.; Rai, D.

    1980-04-01

    This report identifies a number of mechanisms that retard radionuclide migration, and describes the static and dynamic methods that are used to study such retardation phenomena. Both static and dynamic methods are needed for reliable safety assessments of underground nuclear-waste repositories. This report also evaluates the extent to which the two methods may be used to diagnose radionuclide migration through various types of geologic media, among them unconsolidated, crushed, intact, and fractured rocks. Adsorption is one mechanism that can control radionuclide concentrations in solution and therefore impede radionuclide migration. Other mechanisms that control a solution's radionuclide concentration and radionuclide migration are precipitation of hydroxides and oxides, oxidation-reduction reactions, and the formation of minerals that might include the radionuclide as a structural element. The retardation mechanisms mentioned above are controlled by such factors as surface area, cation exchange capacity, solution pH, chemical composition of the rock and of the solution, oxidation-reduction potential, and radionuclide concentration. Rocks and ground waters used in determining retardation factors should represent the expected equilibrium conditions in the geologic system under investigation. Static test methods can be used to rapidly screen the effects of the factors mentioned above. Dynamic (or column) testing, is needed to assess the effects of hydrodynamics and the interaction of hydrodynamics with the other important parameters. This paper proposes both a standard method for conducting batch Kd determinations, and a standard format for organizing and reporting data. Dynamic testing methods are not presently developed to the point that a standard methodology can be proposed. Normal procedures are outlined for column experimentation and the data that are needed to analyze a column experiment are identified

  13. Field determination and QSPR prediction of equilibrium-status soil/vegetation partition coefficient of PCDD/Fs.

    Science.gov (United States)

    Li, Li; Wang, Qiang; Qiu, Xinghua; Dong, Yian; Jia, Shenglan; Hu, Jianxin

    2014-07-15

    Characterizing pseudo equilibrium-status soil/vegetation partition coefficient KSV, the quotient of respective concentrations in soil and vegetation of a certain substance at remote background areas, is essential in ecological risk assessment, however few previous attempts have been made for field determination and developing validated and reproducible structure-based estimates. In this study, KSV was calculated based on measurements of seventeen 2,3,7,8-substituted PCDD/F congeners in soil and moss (Dicranum angustum), and rouzi grass (Thylacospermum caespitosum) of two background sites, Ny-Ålesund of the Arctic and Zhangmu-Nyalam region of the Tibet Plateau, respectively. By both fugacity modeling and stepwise regression of field data, the air-water partition coefficient (KAW) and aqueous solubility (SW) were identified as the influential physicochemical properties. Furthermore, validated quantitative structure-property relationship (QSPR) model was developed to extrapolate the KSV prediction to all 210 PCDD/F congeners. Molecular polarizability, molecular size and molecular energy demonstrated leading effects on KSV. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. RIEDEL MEGASHEARS R' AND THE TREND TO GRAVITATIONAL EQUILIBRIUM AS MAIN FACTORS OF TSUNAMIGENIC EARTHQUAKES

    Directory of Open Access Journals (Sweden)

    M. A. Goncharov

    2014-01-01

    (mainly in the case of the Tohoku earthquake in Japan on March 11, 2011 – subsidense of the Earth surface segment adjacent to the island arc and uplift of the surface segment adjacent to the trench, accompanied by horizontal movement of the material from the arc towards the trench (Figs. 47–54, and 58. This process has a trend of declining relief contrast between the arc and the trough and inversion of the sign of gravity anomalies (Figs. 44–46. And it is the boundary between these regions of the Earth surface subsidence and uplifting, to which tsunamigenic earthquake are confined at reverse faults of the seabed surface with the raised wall facing the trough (Fig. 42. This means that the tendency to gravitational equilibrium realized the potential of forming megashears R', that develop much worse than shears R (or do not develop at all in other natural and modelled settings.The conclusion that foci of tsunamigenic earthquakes R' are confined to the margin between sibsiding and uplifting regions challenges the traditional concept that a tsunami is a consequence of a sharp rise in the seabed in the local uplift area. A slashing subsidence of a vast area of the seabed entails an equally sudden sharp lowering of the sea level and the retreat of the sea from the coast. Such a phenomena was observed by unlucky tourists at the Phuket island just before the Sumatra tsunami. In a similar way, a sudden uplifting of the seabed in the area adjacent to the trough causes a corresponding rise of the sea level. In such cases, masses of water, that are much more mobile than terrestrial masses, are subject to the gravitational disequilibrium, rush towards the shore and cause a tsunami (Fig. 55.A consolidated model of tsunamigenic earthquakes resulting from the trend to restoration of the gravity equilibrium is shown in Fig. 63. According to our conclusions, it is recommended that tsunamigenic earthquakes forecasting should be based on continuous high-precision and high

  15. Interpretation of Frenkel’s theory of sintering considering evolution of activated pores: III. Determination of equilibrium sintering time

    Directory of Open Access Journals (Sweden)

    Yu C.L.

    2015-01-01

    Full Text Available In this article, the Frenkel’s theory of liquid-phase sintering was interpreted regarding pores as the activated volume. The mathematical model established by Nikolić et al. was used to infer the equilibrium sintering time at varied sintering temperatures during the isothermal sintering of codierite glass by Giess et al. Through the calculation, the equilibrium time at 800ºC, 820ºC, 840ºC and 860ºC is inferred to be 7014.42mins, 1569.65mins, 368.92mins and 114.61mins, respectively. The equilibrium time decreases as the temperature increases. And the theoretical value is in good accordance with the experimental results. Thus, the model established by Nikolić et al. can be applied successfully to predict the equilibrium sintering time of the cordierite glass at varied temperatures during isothermal sintering.

  16. Determination of Fano's factor in semiconductors

    International Nuclear Information System (INIS)

    Gomes, P.R.S.

    1975-07-01

    A study was made of three different semiconductor detectors: intrinsic germanium, germanium drifted with lithium, and silicon drifted with lithium. In the efficiency measurements for these detectors, special attention was paid to the escape of the germanium X-rays produced within the detector. The principal part of this work is the determination of the Fano factor for germanium and silicon. A great deal of attention was given to the analysis of experimental results. Different criteria for eliminating the linewidth contribution due to charge collection fluctuations lead to widely different values and have caused great controversy over the value of the Fano factor. Measurements were made for the three detectors using energies of 14.4 kev, 35.4 kev, 46.5 kev, 59.5 kev, 81 kev, 88 kev, 122 kev and 136.5 kev and the results indicate a Fano factor of 0.105 +- 0.004 for germanium and 0.130 +- 0.120 for silicon. (author) [pt

  17. Future Protein Supply and Demand: Strategies and Factors Influencing a Sustainable Equilibrium

    Directory of Open Access Journals (Sweden)

    Maeve Henchion

    2017-07-01

    Full Text Available A growing global population, combined with factors such as changing socio-demographics, will place increased pressure on the world’s resources to provide not only more but also different types of food. Increased demand for animal-based protein in particular is expected to have a negative environmental impact, generating greenhouse gas emissions, requiring more water and more land. Addressing this “perfect storm” will necessitate more sustainable production of existing sources of protein as well as alternative sources for direct human consumption. This paper outlines some potential demand scenarios and provides an overview of selected existing and novel protein sources in terms of their potential to sustainably deliver protein for the future, considering drivers and challenges relating to nutritional, environmental, and technological and market/consumer domains. It concludes that different factors influence the potential of existing and novel sources. Existing protein sources are primarily hindered by their negative environmental impacts with some concerns around health. However, they offer social and economic benefits, and have a high level of consumer acceptance. Furthermore, recent research emphasizes the role of livestock as part of the solution to greenhouse gas emissions, and indicates that animal-based protein has an important role as part of a sustainable diet and as a contributor to food security. Novel proteins require the development of new value chains, and attention to issues such as production costs, food safety, scalability and consumer acceptance. Furthermore, positive environmental impacts cannot be assumed with novel protein sources and care must be taken to ensure that comparisons between novel and existing protein sources are valid. Greater alignment of political forces, and the involvement of wider stakeholders in a governance role, as well as development/commercialization role, is required to address both sources of

  18. Future Protein Supply and Demand: Strategies and Factors Influencing a Sustainable Equilibrium

    Science.gov (United States)

    Henchion, Maeve; Hayes, Maria; Mullen, Anne Maria; Fenelon, Mark; Tiwari, Brijesh

    2017-01-01

    A growing global population, combined with factors such as changing socio-demographics, will place increased pressure on the world’s resources to provide not only more but also different types of food. Increased demand for animal-based protein in particular is expected to have a negative environmental impact, generating greenhouse gas emissions, requiring more water and more land. Addressing this “perfect storm” will necessitate more sustainable production of existing sources of protein as well as alternative sources for direct human consumption. This paper outlines some potential demand scenarios and provides an overview of selected existing and novel protein sources in terms of their potential to sustainably deliver protein for the future, considering drivers and challenges relating to nutritional, environmental, and technological and market/consumer domains. It concludes that different factors influence the potential of existing and novel sources. Existing protein sources are primarily hindered by their negative environmental impacts with some concerns around health. However, they offer social and economic benefits, and have a high level of consumer acceptance. Furthermore, recent research emphasizes the role of livestock as part of the solution to greenhouse gas emissions, and indicates that animal-based protein has an important role as part of a sustainable diet and as a contributor to food security. Novel proteins require the development of new value chains, and attention to issues such as production costs, food safety, scalability and consumer acceptance. Furthermore, positive environmental impacts cannot be assumed with novel protein sources and care must be taken to ensure that comparisons between novel and existing protein sources are valid. Greater alignment of political forces, and the involvement of wider stakeholders in a governance role, as well as development/commercialization role, is required to address both sources of protein and ensure

  19. Definitions and Basic Concepts of Supply and Demand Analysis Used to Determine Market Equilibrium. Principles of Economics II (Microeconomics), Lesson Plan No. 6.

    Science.gov (United States)

    Chiu-Irion, Vicky

    Developed as part of a 37.5-hour microeconomics course, this lesson plan focuses on the concepts of supply and demand analysis used to determine market equilibrium. The objectives of the 50-minute lesson are to enable the student to: (1) explain how a demand schedule is derived from raw data; (2) graph a demand curve from the demand schedule; (3)…

  20. Protein binding of glufosinate and factors affecting it revealed by an equilibrium dialysis technique.

    Science.gov (United States)

    Hori, Y; Koyama, K; Fujisawa, M; Nakajima, M; Shimada, K; Hirose, Y; Kohda, Y; Akuzawa, H

    2001-09-01

    We investigated the protein binding of glufosinate ammonium (GLF) and several factors affecting this binding using human serum albumin (HSA) and human volunteer serum under various conditions. The mean ratios of the free GLF (RFr-GLF) to 4% HSA were examined in the sera of patients described elsewhere at GLF levels from 1 microg/mL to 500 microg/mL; the range was found to be only from 0.80 to 0.88. Neither the incubation temperature nor buffers containing different chloride ion concentrations had any effect on the RFr-GLF to HSA. Moreover, the addition of heparin, glycoprotein-alpha1-acid (AAG), and sodium azide had no effect on the RFr-GLF. However, pH of the isotonic phosphate buffer and the addition of palmitic or oleic acid were seen to have an effect. In this study, the mean RFr-GLF to healthy human serum was 0.99. This high value was evidenced that GLF was rapidly excreted through the renal route.

  1. Factors determining dengue outbreak in Malaysia.

    Science.gov (United States)

    Ahmad, Rohani; Suzilah, Ismail; Wan Najdah, Wan Mohamad Ali; Topek, Omar; Mustafakamal, Ibrahim; Lee, Han Lim

    2018-01-01

    A large scale study was conducted to elucidate the true relationship among entomological, epidemiological and environmental factors that contributed to dengue outbreak in Malaysia. Two large areas (Selayang and Bandar Baru Bangi) were selected in this study based on five consecutive years of high dengue cases. Entomological data were collected using ovitraps where the number of larvae was used to reflect Aedes mosquito population size; followed by RT-PCR screening to detect and serotype dengue virus in mosquitoes. Notified cases, date of disease onset, and number and type of the interventions were used as epidemiological endpoint, while rainfall, temperature, relative humidity and air pollution index (API) were indicators for environmental data. The field study was conducted during 81 weeks of data collection. Correlation and Autoregressive Distributed Lag Model were used to determine the relationship. The study showed that, notified cases were indirectly related with the environmental data, but shifted one week, i.e. last 3 weeks positive PCR; last 4 weeks rainfall; last 3 weeks maximum relative humidity; last 3 weeks minimum and maximum temperature; and last 4 weeks air pollution index (API), respectively. Notified cases were also related with next week intervention, while conventional intervention only happened 4 weeks after larvae were found, indicating ample time for dengue transmission. Based on a significant relationship among the three factors (epidemiological, entomological and environmental), estimated Autoregressive Distributed Lag (ADL) model for both locations produced high accuracy 84.9% for Selayang and 84.1% for Bandar Baru Bangi in predicting the actual notified cases. Hence, such model can be used in forestalling dengue outbreak and acts as an early warning system. The existence of relationships among the entomological, epidemiological and environmental factors can be used to build an early warning system for the prediction of dengue outbreak so

  2. Experimental determination of the (vapor + liquid) equilibrium data of binary mixtures of fatty acids by differential scanning calorimetry

    International Nuclear Information System (INIS)

    Matricarde Falleiro, Rafael M.; Meirelles, Antonio J.A.; Kraehenbuehl, Maria A.

    2010-01-01

    (Vapor + liquid) equilibrium (VLE) data for three binary mixtures of saturated fatty acids were obtained by differential scanning calorimetry (DSC). However, changes in the calorimeter pressure cell and the use of hermetic pans with holes (φ = 250 mm) in the lids were necessary to make it possible to apply this analytical technique, obtaining accurate results with smaller samples and shorter operational times. The systems evaluated in this study were: myristic acid (C 14:0 ) + palmitic acid (C 16:0 ), myristic acid (C 14:0 ) + stearic acid (C 18:0 ), and palmitic acid (C 16:0 ) + stearic acid (C 18:0 ), all measured at 50 mm Hg and with mole fractions between 0.0 and 1.0 in relation to the most volatile component of each diagram. The fugacity coefficients for the components in the vapor phase were calculated using the Hayden and O'Connell method [J.G. Hayden, J.P. O'Connell, Ind. Eng. Chem. Process Design Develop. 14 (3) (1975) 209-216] and the activity coefficients for the liquid phase were correlated with the traditional g E models (NRTL [H. Renon, J.M. Prausnitz, Aiche J. 14 (1968) 135-144], UNIQUAC [D.S. Abrams, J.M. Prausnitz, Aiche J. 21 (1975) 116-128], and Wilson [J.M. Prausnitz, N.L. Linchtenthaler, E.G. Azevedo, Molecular Thermodynamics of Fluid-phase Equilibria, River-Prentice Hall, Upper Saddle, 1999]). The sets of parameters were then compared in order to determine which adjustments best represented the VLE.

  3. Factors affecting the equilibrium constant of homolysis of complexes with metal-carbon σ bonds in aqueous solutions. Pulse radiolysis studies

    International Nuclear Information System (INIS)

    Meyerstein, D.; Ben-Gurion Univ. of the Negev, Beersheba

    1989-01-01

    Pulse-Radiolysis is a powerful technique for the determination of the equilibrium constants of the homolytic cleavage of metal-carbon σ bonds in aqueous solutions. In most systems studied the observed reaction is: L m-1 M (n+1) -R + L ↔ ML m. n + ·R. Therefore the results do not enable a direct determination of the metal-carbon bond dissociation energies. The results obtained indicate that these equilibrium constants are not directly related to the redox potential of either L .m M (n) or of ·R, or to the activation energies for the homolytic cleavage of a family of similarly substituted ethanes. (author)

  4. Determinant Factors of Dividend Payments in Brazil

    Directory of Open Access Journals (Sweden)

    Cristiano Augusto Borges Forti

    2015-08-01

    Full Text Available This study identifies factors that shaped cash disbursement distribution policies employed by Brazilian public companies listed on the Brazilian Securities, Commodities and Futures Exchange (BM&FBOVESPA from 1995 to 2011. Relationships between Dividends/Total Assets and potential determinants discussed in the literature, including firm size, corporate governance, profitability, leverage, market to book, liquidity, investment, risk, profit growth, information asymmetry and agency conflict, are examined. The following econometric methods are employed: (1 Tobit, given the nature of the dividend data, and (2 the Generalized Method of Moments (GMM to control for endogenous regressors. Significant positive variables found include size, return on assets (ROA, market to book, liquidity and profit growth. It can thus be inferred that larger firm size, profitability, market value, liquidity and profit growth correlate with greater firm pro pensity to distribute money to shareholders, thus supporting the theory of corporate finance. Significant negative variables found include leverage, liquidity squared, capex, beta and tag along 100%. It is thus inferred that more significantly leveraged companies that invest more heavily in fixed assets and that exhibit high liquidity, higher risk and less conflict between controlling and minority shareholders will be less likely to pay dividends to shareholders.

  5. 40 CFR 94.218 - Deterioration factor determination.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Deterioration factor determination. 94... Deterioration factor determination. Manufacturers shall determine exhaust emission deterioration factors using good engineering judgement according to the provisions of this section. Every deterioration factor must...

  6. A Quantal Response Statistical Equilibrium Model of Induced Technical Change in an Interactive Factor Market: Firm-Level Evidence in the EU Economies

    Directory of Open Access Journals (Sweden)

    Jangho Yang

    2018-02-01

    Full Text Available This paper studies the pattern of technical change at the firm level by applying and extending the Quantal Response Statistical Equilibrium model (QRSE. The model assumes that a large number of cost minimizing firms decide whether to adopt a new technology based on the potential rate of cost reduction. The firm in the model is assumed to have a limited capacity to process market signals so there is a positive degree of uncertainty in adopting a new technology. The adoption decision by the firm, in turn, makes an impact on the whole market through changes in the factor-price ratio. The equilibrium distribution of the model is a unimodal probability distribution with four parameters, which is qualitatively different from the Walrasian notion of equilibrium in so far as the state of equilibrium is not a single state but a probability distribution of multiple states. This paper applies Bayesian inference to estimate the unknown parameters of the model using the firm-level data of seven advanced OECD countries over eight years and shows that the mentioned equilibrium distribution from the model can satisfactorily recover the observed pattern of technical change.

  7. Some remarks about engineering factor determination

    International Nuclear Information System (INIS)

    Svarny, J.

    2010-01-01

    The problem of the power distribution uncertainties is in general a multidimensional problem of random vector and problem of multidimensional Probability Density Function. The standard methodology of derivation WWER engineering factors is based on representation of analyzed power peaking in the linear form of random factors and on presumption about their normal Probability Density Function. In this paper is presented the derivation of locally defined engineering factors and for mechanical factors has been performed their reformulation. Final formulation of engineering factors as a statistics of relative deviations involves new parameter-mean. Engineering factors definition from so called endpoints of uncertainty tolerance interval is recommended. Approach (95%/95%) for normal Probability Density Function is discussed in detail, the relation to present standard uncertainty methodology of power distribution is found and problem of optimality in tolerance factor finding including limitation of sample size is discussed. On the bases of statistically based uncertainty kinf analysis for linear model has been shown that multivariate outputs vector of power peaking has nearly normal Probability Density Function independently on the Probability Density Function character of input multivariate vector from under its small dimension (lower than number of fuel assemblies in 1/6 core symmetry). Finally the development of the methodological part of the engineering factors for WWER-1000 design macrocode MOBY-DICK is described and their calculation direct on the bases of self-powered detector experimental data of Temelin NPP and Volgodonsk NPP has been performed with inclusion the variability of detector (self-powered detector). (Author)

  8. Determination of quality factors by microdosimetry

    Energy Technology Data Exchange (ETDEWEB)

    Al-Affan, I.A.M.; Watt, D.E.

    1987-03-15

    The application of microdose parameters for the specification of a revised scale of quality factors which would be applicable at low doses and dose rates is examined in terms of an original proposal by Rossi. Two important modifications are suggested to enable an absolute scale of quality factors to be constructed. Allowance should be made to allow for the dependence of the saturation threshold of lineal energy on the type of heavy charged particle. Also, an artificial saturation threshold should be introduced for electron tracks as a means of modifying the measurements made in the microdosimeter to the more realistic site sizes of nanometer dimensions. The proposed absolute scale of quality factors nicely encompasses the high RBEs of around 3 observed at low doses for tritium ..beta.. rays and is consistent with the recent recommendation of the ICRP that the quality factor for fast neutrons be increased by a factor of two, assuming that there is no biological repair for the reference radiation.

  9. Determination of Mucosal Secretory Factors that Influence ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Understanding the complex factors that can lead to HIV infection is crucial to addressing the problem among vulnerable ... Related content ... Policy in Focus publishes a special issue profiling evidence to empower women in the labour market.

  10. Determination of quality factors by microdosimetry

    International Nuclear Information System (INIS)

    Al-Affan, I.A.M.; Watt, D.E.

    1987-01-01

    The application of microdose parameters for the specification of a revised scale of quality factors which would be applicable at low doses and dose rates is examined in terms of an original proposal by Rossi. Two important modifications are suggested to enable an absolute scale of quality factors to be constructed. Allowance should be made to allow for the dependence of the saturation threshold of lineal energy on the type of heavy charged particle. Also, an artificial saturation threshold should be introduced for electron tracks as a means of modifying the measurements made in the microdosimeter to the more realistic site sizes of nanometer dimensions. The proposed absolute scale of quality factors nicely encompasses the high RBEs of around 3 observed at low doses for tritium β rays and is consistent with the recent recommendation of the ICRP that the quality factor for fast neutrons be increased by a factor of two, assuming that there is no biological repair for the reference radiation. (orig.)

  11. Silica gel modified with N-(3-propyl)-O-phenylenediamine: functionalization, metal sorption equilibrium studies and application to metal enrichment prior to determination by flame atomic absorption spectrometry.

    Science.gov (United States)

    Akl, Magda Ali Abd-elAziz; Kenawy, Ibraheim Mohamed; Lasheen, Rabab Ramadan

    2005-08-01

    The use of the chemically modified silica gel N-(3-propyl)-O-phenylenediamine (SiG-NPPDA) adsorbent, for the preconcentration and separation of trace heavy metals, was described. SiG-NPPDA sorbs quantitatively (90-100% recovery) trace amounts of nine heavy metals, viz., Cd(II), Zn(II), Fe(III), Cu(II), Pb(II), Mn(II), Cr(III), Co(II) and Ni(II) at pH 7-8. The sorption capacity varies from 350 to 450 micromol g(-1). Desorption was found to be quantitative with 1-2 M HNO3 or 0.05 M Na2EDTA. The distribution coefficient, Kd and the percentage concentration of the investigated metal ions on the adsorbent at equilibrium, C(M,eqm)% (Recovery, R%), were studied as a function of experimental parameters. The logarithmic values of the distribution coefficient, log Kd, ranges between 4.0 and 6.4. Some foreign ions caused little interference in the preconcentration and determination of the investigated nine metals by flame atomic absorption spectrometry (AAS). The adsorbent and its formed metal chelates were characterized by IR (absorbance and/or reflectance), potentiometric titrations and thermogravimetric analysis (TGA and DTG). The mode of chelation between the SiG-NPPDA adsorbent and the investigated metal ions is proposed to be due to the reaction of the investigated metal ions with the two nitrogen atoms of the SiG-NPPDA adsorbent. The present adsorbent coupled with flame AAS has been used to enrich and determine the nine metal ions in natural aqueous systems and in certified reference materials (RSD < or = 5%). The copper, iron, manganese and zinc present in some pharmaceutical vitamin samples were also preconcentrated on SiG-NPPDA adsorbent and determined by flame AAS (RSD < or = 4.2%). Nanogram concentrations (0.07-0.14 ng ml(-1)) of Cd(II), Zn(II), Fe(III), Pb(II), Cr(III), Mn(II), Cu(II), Co(II) and Ni(II) can be determined reliably with a preconcentration factor of 100.

  12. Topographic and edaphic factors determining Chromolaena odorata ...

    African Journals Online (AJOL)

    Wet grasslands of floodplains were located on soils with a high concentration of clay and silt, phosphorus, calcium and magnesium, as well as a high cation exchange capacity. Conclusions and application of findings: It could be concluded that the texture-moisture of the soil is the main factor, which explained the invasion ...

  13. Psychological factors determine depressive symptomatology after stroke

    NARCIS (Netherlands)

    Van Mierlo, Maria L.; Van Heugten, Caroline M.; Post, Marcel W.; De Kort, Paul L.; Visser-Meily, Anne

    2015-01-01

    Objective To identify psychological factors related to poststroke depressive symptoms. Design Cross-sectional study, with patients assessed at 2 months poststroke. Setting Patients with stroke from 6 general hospitals. Participants Stroke patients (N=344; mean age ± SD, 66.9±12.3y). Interventions

  14. Local equilibrium

    Energy Technology Data Exchange (ETDEWEB)

    Anon.

    1984-12-15

    From 3-6 September the First International Workshop on Local Equilibrium in Strong Interaction Physics took place in Bad-Honnef at the Physics Centre of the German Physical Society. A number of talks covered the experimental and theoretical investigation of the 'hotspots' effect, both in high energy particle physics and in intermediate energy nuclear physics.

  15. Equilibrium Dialysis

    African Journals Online (AJOL)

    context of antimicrobial therapy in malnutrition. Dialysis has in the past presented technical problems, being complicated and time-consuming. A new dialysis system based on the equilibrium technique has now become available, and it is the principles and practical application of this apparatus (Kontron Diapack; Kontron.

  16. Strategic Equilibrium

    NARCIS (Netherlands)

    van Damme, E.E.C.

    2000-01-01

    An outcome in a noncooperative game is said to be self-enforcing, or a strategic equilibrium, if, whenever it is recommended to the players, no player has an incentive to deviate from it.This paper gives an overview of the concepts that have been proposed as formalizations of this requirement and of

  17. Maximin equilibrium

    NARCIS (Netherlands)

    Ismail, M.S.

    2014-01-01

    We introduce a new concept which extends von Neumann and Morgenstern's maximin strategy solution by incorporating `individual rationality' of the players. Maximin equilibrium, extending Nash's value approach, is based on the evaluation of the strategic uncertainty of the whole game. We show that

  18. Determination of equilibrium electron temperature and times using an electron swarm model with BOLSIG+ calculated collision frequencies and rate coefficients

    International Nuclear Information System (INIS)

    Pusateri, Elise N.; Morris, Heidi E.; Nelson, Eric M.; Ji, Wei

    2015-01-01

    Electromagnetic pulse (EMP) events produce low-energy conduction electrons from Compton electron or photoelectron ionizations with air. It is important to understand how conduction electrons interact with air in order to accurately predict EMP evolution and propagation. An electron swarm model can be used to monitor the time evolution of conduction electrons in an environment characterized by electric field and pressure. Here a swarm model is developed that is based on the coupled ordinary differential equations (ODEs) described by Higgins et al. (1973), hereinafter HLO. The ODEs characterize the swarm electric field, electron temperature, electron number density, and drift velocity. Important swarm parameters, the momentum transfer collision frequency, energy transfer collision frequency, and ionization rate, are calculated and compared to the previously reported fitted functions given in HLO. These swarm parameters are found using BOLSIG+, a two term Boltzmann solver developed by Hagelaar and Pitchford (2005), which utilizes updated cross sections from the LXcat website created by Pancheshnyi et al. (2012). We validate the swarm model by comparing to experimental effective ionization coefficient data in Dutton (1975) and drift velocity data in Ruiz-Vargas et al. (2010). In addition, we report on electron equilibrium temperatures and times for a uniform electric field of 1 StatV/cm for atmospheric heights from 0 to 40 km. We show that the equilibrium temperature and time are sensitive to the modifications in the collision frequencies and ionization rate based on the updated electron interaction cross sections

  19. Thermodynamic models for determination of solid–liquid equilibrium of the 6-benzyladenine in pure and binary organic solvents

    International Nuclear Information System (INIS)

    Li, Tao; Deng, Renlun; Wu, Gang; Gu, Pengfei; Hu, Yonghong; Yang, Wenge; Yu, Yemin; Zhang, Yuhao; Yang, Chen

    2017-01-01

    Highlights: • The solubility increased with increasing temperature. • Data were fitted using the modified Apelblat equation and other models in pure solvents. • Data were fitted using the modified Apelblat equation and other models in binary solvent mixture. - Abstract: Data on corresponding solid–liquid equilibrium of 6-benzyladenine in different solvents are essential for a preliminary study of industrial applications. In this paper, the solid–liquid equilibrium of 6-benzyladenine in methanol, ethanol, 1-butanol, acetone, acetonitrile, ethyl acetate, dimethyl formamide and tetrahydrofuran pure solvents and (dimethyl formamide + actone) mixture solvents was explored within the temperature range from (278.15 to 333.15) K under 0.1 MPa. For the temperature range investigated, the solubility of 6-benzyladenine in the solvents increased with increasing temperature. The solubility of 6-benzyladenine in dimethyl formamide is superior to other selected pure solvents. The modified Apelblat model, the Buchowski-Ksiazaczak λh model, and the ideal model were adopted to describe and predict the change tendency of solubility. Computational results showed that the modified Apelblat model has more advantages than the other two models. The solubility results were fitted using a modified Apelblat equation, a variant of the combined nearly ideal binary solvent/Redich-Kister (CNIBS/R-K) model, Jouyban-Acree model and Ma model in (dimethyl formamide + acetone) binary solvent mixture. Computational results showed that the modified Apelblat model is superior to the other equations.

  20. Determination and correlation thermodynamic models for solid–liquid equilibrium of the Nifedipine in pure and mixture organic solvents

    International Nuclear Information System (INIS)

    Wu, Gang; Hu, Yonghong; Gu, Pengfei; Yang, Wenge; Wang, Chunxiao; Ding, Zhiwen; Deng, Renlun; Li, Tao; Hong, Housheng

    2016-01-01

    Highlights: • The solubility increased with increasing temperature. • The data were fitted using the modified Apelblat equation in pure solvents. • The data were fitted using the CNIBS/R-K model in binary solvent mixture. - Abstract: Knowledge of thermodynamic parameters on corresponding solid-liquid equilibrium of nifedipine in different solvents is essential for a preliminary study of pharmaceutical engineering and industrial applications. In this paper, a gravimetric method was used to correct the solid-liquid equilibrium of nifedipine in methanol, ethanol, 1-butanol, acetone, acetonitrile, ethyl acetate and tetrahydrofuran pure solvents as well as in the (tetrahydrofuran + acetonitrile) mixture solvents at temperatures from 278.15 K to 328.15 K under 0.1 MPa. For the temperature range investigation, the solubility of nifedipine in the solvents increased with increasing temperature. The solubility of nifedipine in tetrahydrofuran is superior to other selected pure solvents. The modified Apelblat model, the Buchowski-Ksiazaczak λh model, and the ideal model were adopted to describe and predict the change tendency of solubility. Computational results showed that the modified Apelblat model stood out to be more suitable with the higher accuracy. The solubility values were fitted using a modified Apelblat model, a variant of the combined nearly ideal binary solvent/Redich-Kister (CNIBS/R-K) model and Jouyban-Acree model in (tetrahydrofuran + acetonitrile) binary solvent mixture. Computational results showed that the CNIBS/R-K model had more advantages than other models.

  1. DIAGNOSIS OF FINANCIAL EQUILIBRIUM

    Directory of Open Access Journals (Sweden)

    SUCIU GHEORGHE

    2013-04-01

    Full Text Available The analysis based on the balance sheet tries to identify the state of equilibrium (disequilibrium that exists in a company. The easiest way to determine the state of equilibrium is by looking at the balance sheet and at the information it offers. Because in the balance sheet there are elements that do not reflect their real value, the one established on the market, they must be readjusted, and those elements which are not related to the ordinary operating activities must be eliminated. The diagnosis of financial equilibrium takes into account 2 components: financing sources (ownership equity, loaned, temporarily attracted. An efficient financial equilibrium must respect 2 fundamental requirements: permanent sources represented by ownership equity and loans for more than 1 year should finance permanent needs, and temporary resources should finance the operating cycle.

  2. Radium-226 equilibrium between water and lake herring, Coregonus artedii, tissues attained within fish lifetime: confirmation in this species of one assumption in the simple linear concentration factor model

    International Nuclear Information System (INIS)

    Clulow, F.V.; Pyle, G.G.

    1997-01-01

    Equilibrium conditions are assumed in the simple linear concentration factor model commonly used in simulations of contaminant flow through ecosystems and in dose and risk calculations. Predictions derived from a power function model have suggested that if the time scale of the food-chain transfer is less than six years in fish, radium-226 equilibrium will not be achieved in nature, thereby violating the equilibrium requirement in the concentration factor model. Our results indicate 226 Ra equilibrium is achieved in a natural population of lake herring (Coregonus artedii), contrary to predictions of the power function model. (author)

  3. [Determination of priority unfavorable environmental factors].

    Science.gov (United States)

    Zaikova, Z A; Burdukovskaya, A V; Belykh, A I

    In the Irkutsk region there are recorded high indices of rates of morbidity, disability, mortality rate of the working-age population and low levels of life expectancy of the population, that is confirmed by ranking position levels among the all subjects of the Russian Federation. According to all mentioned indices of health the region is inside the top ten unfavorable regions of Russia. In relation to the problem in the state of health of the adult population the estimation of the causal relationships between environmental factors and certain health indices is actual. The list of studiedfactors included health indices that characterize the harmful working conditions of the working population and basic socioeconomic indices in the region. Estimation of causal-relationship relationships was performed with the use of methods of multivariate analysis - correlation and multiple linear regression. In the selection offactors for the construction of mathematical models of multiple regression there were used methods of the analysis of variables variability, pair correlation coefficients matrix and sequential switching covariates to eliminate the problems of multicollinearity, pre-standardization of indices for the elevation of the numerical stability of regression analysis algorithm. As a result of the execution of the analysis there were constructed statistical models for the dependence in the system variables “environment - public health”, which allowed to identify the most informative regression models for the adult population health according to indices of primary disability of the population, the mortality rate and life expectancy of the working age population. According to results of the analysis there were identified priority factors affecting on the health of the adult population of the Irkutsk region. To these factors there are referred the proportion of workplaces failing to meet sanitary standards for vibration and 8 socio-economic indices of living

  4. More accurate determination of the quantity of ice crystallized at low cooling rates in the glycerol and 1,2-propanediol aqueous solutions: comparison with equilibrium.

    Science.gov (United States)

    Boutron, P

    1984-04-01

    It is generally assumed that when cells are cooled at rates close to those corresponding to the maximum of survival, once supercooling has ceased, above the eutectic melting temperature the extracellular ice is in equilibrium with the residual solution. This did not seem evident to us due to the difficulty of ice crystallization in cryoprotective solutions. The maximum quantities of ice crystallized in glycerol and 1,2-propanediol solutions have been calculated from the area of the solidification and fusion peaks obtained with a Perkin-Elmer DSC-2 differential scanning calorimeter. The accuracy has been improved by several corrections: better defined baseline, thermal variation of the heat of fusion of the ice, heat of solution of the water from its melting with the residual solution. More ice crystallizes in the glycerol than in the 1,2-propanediol solutions, of which the amorphous residue contains about 40 to 55% 1,2-propanediol. The equilibrium values are unknown in the presence of 1,2-propanediol. With glycerol, in our experiments, the maximum is first lower than the equilibrium but approaches it as the concentration increases. It is not completely determined by the colligative properties of the solutes.

  5. Determination of equilibrium phase composition in the Hg-HgTe-CdTe system by ''dew point'' method

    International Nuclear Information System (INIS)

    Vanyukov, A.V.; Krotov, I.I.; Ermakov, A.I.

    1978-01-01

    Using the ''dew point'' method a study has been made of the equilibrium composition of the solid and liquid phases in the Hg-HgTe-CdTe system at 404, 435 and 454 deg C. It has been pointed out that crystallization of cadmium-rich solid solutions of Cdsub(x)Hgsub(1-x) Te takes place from a liquid phase with a much higher concentration of Hg. The activity of Hg in the liquid phase increases along the liquidus isotherm in the direction from section Hg-HgTe to section HgCdTe in accordance with the increase of its concentration. An increase in activity of Hg in the solid phase of Cdsub(x)Hgsub(1-x)Te has been noted with the reduction of its concentration

  6. Determining Factors on Environmental Behaviour in Brasilia

    Directory of Open Access Journals (Sweden)

    Alexandre Nascimento de Almeida

    2015-12-01

    Full Text Available The growing concern about the environment has been changing the people's behaviour, leading to questions about the origin of products and the damage they cause to the environment, resulting in a new type of consumer, known as "green consumer". The purpose is to identify the influence of socio-demographic and psychographic factors on the environmental behaviour of individuals in the city of Brasilia and to provide information for the planning of environmental marketing strategies. Data were collected through a questionnaire and by way of logistic regression as analytical tools.The results indicated that the environmentally conscious individuals are those with higher levels of education and, especially, those who perceive the effectiveness of their environmental actions, however small or isolated.

  7. Sweatshop equilibrium

    OpenAIRE

    Chau, Nancy H.

    2009-01-01

    This paper presents a capability-augmented model of on the job search, in which sweatshop conditions stifle the capability of the working poor to search for a job while on the job. The augmented setting unveils a sweatshop equilibrium in an otherwise archetypal Burdett-Mortensen economy, and reconciles a number of oft noted yet perplexing features of sweatshop economies. We demonstrate existence of multiple rational expectation equilibria, graduation pathways out of sweatshops in complete abs...

  8. Determining the Number of Factors in P-Technique Factor Analysis

    Science.gov (United States)

    Lo, Lawrence L.; Molenaar, Peter C. M.; Rovine, Michael

    2017-01-01

    Determining the number of factors is a critical first step in exploratory factor analysis. Although various criteria and methods for determining the number of factors have been evaluated in the usual between-subjects R-technique factor analysis, there is still question of how these methods perform in within-subjects P-technique factor analysis. A…

  9. Factors determining nestedness in complex networks.

    Directory of Open Access Journals (Sweden)

    Samuel Jonhson

    Full Text Available Understanding the causes and effects of network structural features is a key task in deciphering complex systems. In this context, the property of network nestedness has aroused a fair amount of interest as regards ecological networks. Indeed, Bastolla et al. introduced a simple measure of network nestedness which opened the door to analytical understanding, allowing them to conclude that biodiversity is strongly enhanced in highly nested mutualistic networks. Here, we suggest a slightly refined version of such a measure of nestedness and study how it is influenced by the most basic structural properties of networks, such as degree distribution and degree-degree correlations (i.e. assortativity. We find that most of the empirically found nestedness stems from heterogeneity in the degree distribution. Once such an influence has been discounted - as a second factor - we find that nestedness is strongly correlated with disassortativity and hence - as random networks have been recently found to be naturally disassortative - they also tend to be naturally nested just as the result of chance.

  10. Determination of IgE rheumatoid factor

    International Nuclear Information System (INIS)

    Herrmann, D.; Schlenvoigt, G.; Jaeger, L.

    1987-01-01

    A solid-phase radioimmunoassay and an enzyme-linked immunosorbent assay have been developed for the identification of IgE rheumatoid factor (IgE RF). For both, human IgG was used as antigen. Bound IgE RF was detected by means of commercially available rabbit anti-human IgE antiserum and 125 I-labelled sheep anti-rabbit IgG as well as monoclonal anti-human-ε-chain antibody and horse-radish peroxidase-labelled sheep anti-mouse IgG. The presence of IgM RF did not cause false positive results. Correlation in the results of both assays were significant, the reproducibility was very good. In 50.6% of 79 sera from patients with rheumatoid arthritis IgE RF has been detected with both or one of the methods. Only in 1 out of 12 seronegative rheumatoid arthritis sera IgE RF was identified. (author)

  11. The determinant factors of open business model

    Directory of Open Access Journals (Sweden)

    Juan Mejía-Trejo

    2017-01-01

    Full Text Available Intro ducción : Desde principios del siglo XXI, varios autores afirman que los modelos de negocio abiertos (OBM permiten a una organización ser más eficaz en la creación y la ca p tura de valor siendo un requisito previo para el éxito de las asociaciones de co - des arrollo. Como resultado de las tendencias de: crecientes costos de desarrollo y ciclos de vida de los produ c tos/servicios más cortos, las empresas encuentran cada vez más difícil justificar las inversi o nes en innovación. El OBM resuelve ambas tendencias, s ubrayando los términos: " ecosistema de la industria " y/o " modelo de negocio colaborativo ". No sólo cambia el pr o ceso de innovación, sino que también modifica a las propias organizaciones mediante la r e configuración de sus cadenas de valor y redes. Para las empresas, crea una lógica heurística basada en el actual modelo de negocio y tecnología para extenderlas, con estrategia, al desa r rollo de la innov a ción para crear valor y aumentar los ingresos y beneficios. Enfatiza tanto las relaciones exte r nas así como la gobernabilidad, como valiosos recursos con varios roles que promueven la competitividad corporativa. Por lo tanto, para un sector especializado de alta tecnología como lo es el de las tecnologías de la información de la zona metropolitana de Guadalajar a (IT S MZG, exponemos el siguiente problema de investigación: ¿Cuáles son los factores determinantes de la OBM como modelo empírico que se aplc a do en el ITSMZG? Método: Como se ve, esta investigación tiene como objetivo plantear, los factores determ i nantes de la OBM como un modelo empírico que sea aplicado en el ITSMZG.Se trata de un estudio documental para seleccionar las principales v a riables entre los especialistas de las ITSMZG que practican el proceso OBM mediante el proceso de j e rarquía analítica (AHP y el Panel de Delphi a fin de contrastar los términos académicos con la experiencia de los e s pecialistas. Es un

  12. Use of the cation exchange equilibrium method for the determination of stability constants of Co(II) with soil humic and fulvic acids

    International Nuclear Information System (INIS)

    Du, J.Z.; Zhou, C.Y.; Dong, W.M.; Tao, Z.Y.

    1999-01-01

    The stability constants for tracer concentrations of Co(II) complexes with both the red earth humic and fulvic acids were determined at pH 5.9 and ionic strength 0.010 mol/l by using the ARDAKANI-STEVENSON cation exchange equilibrium method and the radiotracer 60 Co. It was found that the 1:1 complexes of Co(II) with the red earth humic and fulvic acids were formed and that the average values of logβ (stability constant) of humic and fulvic acid complexes were 5.76±0.19 and 4.42±0.03, respectively. (author)

  13. Determining factors for implant referral rates.

    Science.gov (United States)

    Levin, Roger P

    2002-01-01

    The research findings indicate that the field of implant dentistry will only grow at a moderately low level unless certain changes are made. Findings indicated that the effort by the implant companies has been nothing short of dramatic, and yet almost 60% of restorative doctors do not participate annually in any implant case. There was no clear indication that younger restorative doctors will significantly increase the number of implant referrals, as their overall implant education has not dramatically differed from those dentists who graduated in earlier years. Once the research was completed, it became obvious to Levin Group that the driving force behind implant referral growth will be implant surgeons, because of their one-to-one relationship with restorative doctors. The Levin Group Implant Management and Marketing Consulting Program is based on approaching restorative doctors in several different levels, starting with awareness all the way through to case facilitation and long-term tracking and communication. Finally, a continuing marketing/education effort needs to be consistently in place with effective materials, not only to create a high level of awareness, but also to motivate restorative doctors to refer cases and then work through the case with the implant surgeon to a satisfactory completion for the restorative doctor, implant surgeon, and patient. While the surgical insertion of implants may seem to carry a high-profit margin relative to the restoration of implants, the truth is that the restoration of implants usually provides a 40% higher profit margin for the restorative doctor than traditional dental services. One of the key issues is that referring doctors have not necessarily learned how to set fees and present cases with regard to implant dentistry. The key factor here is to ensure that the patient understands that implant services involve higher fees than traditional services, because of the necessarily higher levels of experience, education

  14. The specific monomer/dimer equilibrium of the corticotropin-releasing factor receptor type 1 is established in the endoplasmic reticulum.

    Science.gov (United States)

    Teichmann, Anke; Gibert, Arthur; Lampe, André; Grzesik, Paul; Rutz, Claudia; Furkert, Jens; Schmoranzer, Jan; Krause, Gerd; Wiesner, Burkhard; Schülein, Ralf

    2014-08-29

    G protein-coupled receptors (GPCRs) represent the most important drug targets. Although the smallest functional unit of a GPCR is a monomer, it became clear in the past decades that the vast majority of the receptors form dimers. Only very recently, however, data were presented that some receptors may in fact be expressed as a mixture of monomers and dimers and that the interaction of the receptor protomers is dynamic. To date, equilibrium measurements were restricted to the plasma membrane due to experimental limitations. We have addressed the question as to where this equilibrium is established for the corticotropin-releasing factor receptor type 1. By developing a novel approach to analyze single molecule fluorescence cross-correlation spectroscopy data for intracellular membrane compartments, we show that the corticotropin-releasing factor receptor type 1 has a specific monomer/dimer equilibrium that is already established in the endoplasmic reticulum (ER). It remains constant at the plasma membrane even following receptor activation. Moreover, we demonstrate for seven additional GPCRs that they are expressed in specific but substantially different monomer/dimer ratios. Although it is well known that proteins may dimerize in the ER in principle, our data show that the ER is also able to establish the specific monomer/dimer ratios of GPCRs, which sheds new light on the functions of this compartment. © 2014 by The American Society for Biochemistry and Molecular Biology, Inc.

  15. The Zr-Pt system. Experimental determination of the phase equilibrium conditions, and obtention of the diagram by thermodynamical modeling

    International Nuclear Information System (INIS)

    Alonso, Regina P.

    1997-01-01

    Two regions in the zirconium-platinum system (Zr-Pt) were investigated, namely, the zirconium rich and the platinum rich regions. With this purpose, five alloys were obtained. The performed experiences consisted on heat treatments and electrical resistivity variations with temperature measurements. The appearing phases were analyzed by optical and scanning electron microscopy (SEM), quantitative microanalysis and X-ray diffraction techniques. Besides that, the existing phases in the rich zirconium region between 0 and 50 % at. Pt were thermodynamically modelled and the resulting diagram was calculated by means of the Thermocalc computational program. Several proposals were formulated: a) A change in the eutectoid transformation temperature βZr ↔ αZr + pp (800 C degrees according to this work); b) The existence of the phase Zr 3 Pt in the equilibrium diagram; c) The existence of the peritectic transformation Liquid + Zr 5 Pt 3 ↔ Zr 3 Pt; d) The occurrence of the two - phases region ZrPt 3 + ZrPt 8 between 1050 and 1320 C degrees, and finally; e) The occurrence of the peritectic transformation ZrPt 3 + Liquid ↔ γPt was verified. (author)

  16. Use of 1–4 interaction scaling factors to control the conformational equilibrium between α-helix and β-strand

    Energy Technology Data Exchange (ETDEWEB)

    Pang, Yuan-Ping, E-mail: pang@mayo.edu

    2015-02-06

    Highlights: • 1–4 interaction scaling factors are used to adjust conformational energy. • This article reports the effects of these factors on protein conformations. • Reducing these factors changes a helix to a strand in molecular dynamics simulation. • Increasing these factors causes the reverse conformational change. • These factors control the conformational equilibrium between helix and strand. - Abstract: 1–4 interaction scaling factors are used in AMBER forcefields to reduce the exaggeration of short-range repulsion caused by the 6–12 Lennard-Jones potential and a nonpolarizable charge model and to obtain better agreements of small-molecule conformational energies with experimental data. However, the effects of these scaling factors on protein secondary structure conformations have not been investigated until now. This article reports the finding that the 1–4 interactions among the protein backbone atoms separated by three consecutive covalent bonds are more repulsive in the α-helix conformation than in two β-strand conformations. Therefore, the 1–4 interaction scaling factors of protein backbone torsions ϕ and ψ control the conformational equilibrium between α-helix and β-strand. Molecular dynamics simulations confirm that reducing the ϕ and ψ scaling factors readily converts the α-helix conformation of AcO-(AAQAA){sub 3}-NH{sub 2} to a β-strand conformation, and the reverse occurs when these scaling factors are increased. These results suggest that the ϕ and ψ scaling factors can be used to generate the α-helix or β-strand conformation in situ and to control the propensities of a forcefield for adopting secondary structure elements.

  17. Use of 1–4 interaction scaling factors to control the conformational equilibrium between α-helix and β-strand

    International Nuclear Information System (INIS)

    Pang, Yuan-Ping

    2015-01-01

    Highlights: • 1–4 interaction scaling factors are used to adjust conformational energy. • This article reports the effects of these factors on protein conformations. • Reducing these factors changes a helix to a strand in molecular dynamics simulation. • Increasing these factors causes the reverse conformational change. • These factors control the conformational equilibrium between helix and strand. - Abstract: 1–4 interaction scaling factors are used in AMBER forcefields to reduce the exaggeration of short-range repulsion caused by the 6–12 Lennard-Jones potential and a nonpolarizable charge model and to obtain better agreements of small-molecule conformational energies with experimental data. However, the effects of these scaling factors on protein secondary structure conformations have not been investigated until now. This article reports the finding that the 1–4 interactions among the protein backbone atoms separated by three consecutive covalent bonds are more repulsive in the α-helix conformation than in two β-strand conformations. Therefore, the 1–4 interaction scaling factors of protein backbone torsions ϕ and ψ control the conformational equilibrium between α-helix and β-strand. Molecular dynamics simulations confirm that reducing the ϕ and ψ scaling factors readily converts the α-helix conformation of AcO-(AAQAA) 3 -NH 2 to a β-strand conformation, and the reverse occurs when these scaling factors are increased. These results suggest that the ϕ and ψ scaling factors can be used to generate the α-helix or β-strand conformation in situ and to control the propensities of a forcefield for adopting secondary structure elements

  18. Tracer disposition kinetics in the determination of local cerebral blood flow by a venous equilibrium model, tube model, and distributed model

    International Nuclear Information System (INIS)

    Sawada, Y.; Sugiyama, Y.; Iga, T.; Hanano, M.

    1987-01-01

    Tracer distribution kinetics in the determination of local cerebral blood flow (LCBF) were examined by using three models, i.e., venous equilibrium, tube, and distributed models. The technique most commonly used for measuring LCBF is the tissue uptake method, which was first developed and applied by Kety. The measurement of LCBF with the 14 C-iodoantipyrine (IAP) method is calculated by using an equation derived by Kety based on the Fick's principle and a two-compartment model of blood-tissue exchange and tissue concentration at a single data point. The procedure, in which the tissue is to be in equilibrium with venous blood, will be referred to as the tissue equilibration model. In this article, effects of the concentration gradient of tracer along the length of the capillary (tube model) and the transverse heterogeneity in the capillary transit time (distributed model) on the determination of LCBF were theoretically analyzed for the tissue sampling method. Similarities and differences among these models are explored. The rank order of the LCBF calculated by using arterial blood concentration time courses and the tissue concentration of tracer based on each model were tube model (model II) less than distributed model (model III) less than venous equilibrium model (model I). Data on 14 C-IAP kinetics reported by Ohno et al. were employed. The LCBFs calculated based on model I were 45-260% larger than those in models II or III. To discriminate among three models, we propose to examine the effect of altering the venous infusion time of tracer on the apparent tissue-to-blood concentration ratio (lambda app). A range of the ratio of the predicted lambda app in models II or III to that in model I was from 0.6 to 1.3

  19. 25 CFR 153.4 - Factors determining competency.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Factors determining competency. 153.4 Section 153.4...: CROW INDIANS § 153.4 Factors determining competency. Among the matters to be considered by the... friends and relatives, or will become such a charge, by reason of being classed as competent; and whether...

  20. Mental Equilibrium and Rational Emotions

    OpenAIRE

    Eyal Winter; Ignacio Garcia-Jurado; Jose Mendez-Naya; Luciano Mendez-Naya

    2009-01-01

    We introduce emotions into an equilibrium notion. In a mental equilibrium each player "selects" an emotional state which determines the player's preferences over the outcomes of the game. These preferences typically differ from the players' material preferences. The emotional states interact to play a Nash equilibrium and in addition each player's emotional state must be a best response (with respect to material preferences) to the emotional states of the others. We discuss the concept behind...

  1. Fatigue - determination of a more realistic usage factor

    International Nuclear Information System (INIS)

    Lang, H.

    2001-01-01

    The ability to use a suitable counting method for determining the stress range spectrum in elastic and simplified elastic-plastic fatigue analyses is of crucial importance for enabling determination of a realistic usage factor. Determination of elastic-plastic strain range using the K e factor from fictitious elastically calculated loads is also important in the event of elastic behaviour being exceeded. This paper thus examines both points in detail. A fatigue module with additional options, which functions on this basis is presented. The much more realistic determination of usage factor presented here offers various economic benefits depending on the application

  2. 40 CFR 1065.845 - Response factor determination.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Response factor determination. 1065... POLLUTION CONTROLS ENGINE-TESTING PROCEDURES Testing With Oxygenated Fuels § 1065.845 Response factor... each FID analyzer's alcohol/carbonyl response factor (such as RF MeOH) after FID optimization to...

  3. Determination of epithermal flux correction factor (α) for irradiation ...

    African Journals Online (AJOL)

    Due to resonance that occur in the epithermal energy region of a reactor, the flux spectra in that region deviates strongly from the ideal I/E law to a I/E1+α with alpha as the correction factor. The factor has to be determined if zirconium as monitor pairs to determine the correction factor for inner irradiation channel 5 and outer ...

  4. Immunity by equilibrium.

    Science.gov (United States)

    Eberl, Gérard

    2016-08-01

    The classical model of immunity posits that the immune system reacts to pathogens and injury and restores homeostasis. Indeed, a century of research has uncovered the means and mechanisms by which the immune system recognizes danger and regulates its own activity. However, this classical model does not fully explain complex phenomena, such as tolerance, allergy, the increased prevalence of inflammatory pathologies in industrialized nations and immunity to multiple infections. In this Essay, I propose a model of immunity that is based on equilibrium, in which the healthy immune system is always active and in a state of dynamic equilibrium between antagonistic types of response. This equilibrium is regulated both by the internal milieu and by the microbial environment. As a result, alteration of the internal milieu or microbial environment leads to immune disequilibrium, which determines tolerance, protective immunity and inflammatory pathology.

  5. Equilibrium thermodynamics

    CERN Document Server

    de Oliveira, Mário J

    2017-01-01

    This textbook provides an exposition of equilibrium thermodynamics and its applications to several areas of physics with particular attention to phase transitions and critical phenomena. The applications include several areas of condensed matter physics and include also a chapter on thermochemistry. Phase transitions and critical phenomena are treated according to the modern development of the field, based on the ideas of universality and on the Widom scaling theory. For each topic, a mean-field or Landau theory is presented to describe qualitatively the phase transitions. These theories include the van der Waals theory of the liquid-vapor transition, the Hildebrand-Heitler theory of regular mixtures, the Griffiths-Landau theory for multicritical points in multicomponent systems, the Bragg-Williams theory of order-disorder in alloys, the Weiss theory of ferromagnetism, the Néel theory of antiferromagnetism, the Devonshire theory for ferroelectrics and Landau-de Gennes theory of liquid crystals. This new edit...

  6. Determination of the distance-dependent viscosity of mixtures in parallel slabs using non-equilibrium molecular dynamics

    Czech Academy of Sciences Publication Activity Database

    Pařez, Stanislav; Předota, M.

    2012-01-01

    Roč. 14, č. 10 (2012), s. 3640-3650 ISSN 1463-9076 R&D Projects: GA ČR GA203/08/0094 Institutional support: RVO:67985858 Keywords : interface * viscosity * molecular simulatiion Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.829, year: 2012

  7. Equilibrium and non equilibrium in fragmentation

    International Nuclear Information System (INIS)

    Dorso, C.O.; Chernomoretz, A.; Lopez, J.A.

    2001-01-01

    Full text: In this communication we present recent results regarding the interplay of equilibrium and non equilibrium in the process of fragmentation of excited finite Lennard Jones drops. Because the general features of such a potential resemble the ones of the nuclear interaction (fact that is reinforced by the similarity between the EOS of both systems) these studies are not only relevant from a fundamental point of view but also shed light on the problem of nuclear multifragmentation. We focus on the microscopic analysis of the state of the fragmenting system at fragmentation time. We show that the Caloric Curve (i e. the functional relationship between the temperature of the system and the excitation energy) is of the type rise plateau with no vapor branch. The usual rise plateau rise pattern is only recovered when equilibrium is artificially imposed. This result puts a serious question on the validity of the freeze out hypothesis. This feature is independent of the dimensionality or excitation mechanism. Moreover we explore the behavior of magnitudes which can help us determine the degree of the assumed phase transition. It is found that no clear cut criteria is presently available. (Author)

  8. Molecular equilibrium with condensation

    International Nuclear Information System (INIS)

    Sharp, C.M.; Huebner, W.F.

    1990-01-01

    Minimization of the Gibbs energy of formation for species of chemical elements and compounds in their gas and condensed phases determines their relative abundances in a mixture in chemical equilibrium. The procedure is more general and more powerful than previous abundance determinations in multiphase astrophysical mixtures. Some results for astrophysical equations of state are presented, and the effects of condensation on opacity are briefly indicated. 18 refs

  9. The Gellyfish: an in-situ equilibrium-based sampler for determining multiple free metal ion concentrations in marine ecosystems

    Science.gov (United States)

    Free metal ions are usually the most bioavailable and toxic metal species to aquatic organisms, but they are difficult to measure because of their extremely low concentrations in the marine environment. Many of the current methods for determining free metal ions are complicated a...

  10. DNA unwinding induced by photoaddition of psoralen derivatives and determination of dark-binding equilibrium constants by gel electrophoresis

    International Nuclear Information System (INIS)

    Wiesehahn, G.; Hearst, J.E.

    1978-01-01

    Derivatives of furo[3,2-g]coumarin (psoralen) can bind to the DNA double helix and, in the presence of long-wavelength uv light, the bound psoralen may react covalently with pyrimidine residues on one or both strands of the helix. By using agarose gel electrophoresis, we have determined the unwinding angle associated with each of four different psoralen derivatives to be 28 0 +- 4 0 . For 4,5',8-trimethylpsoralen (trioxsalen) the unwinding angle was found to be independent of the initial DNA superhelix density in the range that is accessible to agarose gel electrophoresis. Also by using agarose gel electrophoresis, we have determined the unwinding angle for ethidium intercalation. This was done by the total relaxation of supercoiled DNA in the presence of a series of ethidium concentrations. By using published values for the association constant for ethidium binding to DNA and evaluating the final superhelix density (after removal of ethidium) of the DNA on gels, we calculated an unwinding angle of 29 0 +- 3 0 . Assuming an unwinding angle of 28 0 for the noncovalent intercalation of psoralen derivatives, we used the same procedure to determine intercalation binding constants. The association constants for 4'-aminomethyltrioxsalen were 300 to 1400 M -1 in NaCl at 0.2 to 0.05 M and 300 to 2500 M -1 in Mg 2+ at 4 to 0.5 mM. The association constant for 4'-hydroxymethyltrioxsalen in 0.5 mM Mg 2+ was determined to be 70 M -1

  11. Equilibrium phase experimental determination of petroleum + gas systems at supercritical condition using ultrasonic technology; Estudo experimental do equilibrio de fases de sistemas de fracoes de petroleo e gases em condicoes supercriticas utilizando tecnicas de ultra-som: aparato experimental

    Energy Technology Data Exchange (ETDEWEB)

    Mehl, Ana; Pessoa, Fernando L.P.; Silva, Silvia M.C. da [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica; Feiteira, Jose F. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Escola de Engenharia

    2008-07-01

    In separation process of multicomponent systems based on phase equilibrium is essential know the phase behavior and the critical points of the system for determination and optimization of the operational conditions. The experimental apparatus presents the challenge of determine the equilibrium phase dates of a system composed by petroleum residua and supercritical solvent. The used method, named acoustic method, allows the composition identification of the phases in equilibrium also in cloudy systems as they are the systems formed by residues of crude oil. For this reason, the acoustic methodology, based on the ultra-sound technology will be used in the study of the phase equilibrium and experimental characterization of the system, in benches scale, operating in severe conditions of temperature and pressure.The acoustic method is one not invasive and not subjective technique, what becomes the work in high pressures safer. (author)

  12. Determining critical success factor of it project management and its ...

    African Journals Online (AJOL)

    Determining critical success factor of it project management and its influence towards the ... Journal of Fundamental and Applied Sciences ... respondents who have background in IT management in both public and private sector to gain ...

  13. Rotational spectra of rare isotopic species of fluoroiodomethane: determination of the equilibrium structure from rotational spectroscopy and quantum-chemical calculations.

    Science.gov (United States)

    Puzzarini, Cristina; Cazzoli, Gabriele; López, Juan Carlos; Alonso, José Luis; Baldacci, Agostino; Baldan, Alessandro; Stopkowicz, Stella; Cheng, Lan; Gauss, Jürgen

    2012-07-14

    Supported by accurate quantum-chemical calculations, the rotational spectra of the mono- and bi-deuterated species of fluoroiodomethane, CHDFI and CD(2)FI, as well as of the (13)C-containing species, (13)CH(2)FI, were recorded for the first time. Three different spectrometers were employed, a Fourier-transform microwave spectrometer, a millimeter/submillimter-wave spectrometer, and a THz spectrometer, thus allowing to record a huge portion of the rotational spectrum, from 5 GHz up to 1.05 THz, and to accurately determine the ground-state rotational and centrifugal-distortion constants. Sub-Doppler measurements allowed to resolve the hyperfine structure of the rotational spectrum and to determine the complete iodine quadrupole-coupling tensor as well as the diagonal elements of the iodine spin-rotation tensor. The present investigation of rare isotopic species of CH(2)FI together with the results previously obtained for the main isotopologue [C. Puzzarini, G. Cazzoli, J. C. López, J. L. Alonso, A. Baldacci, A. Baldan, S. Stopkowicz, L. Cheng, and J. Gauss, J. Chem. Phys. 134, 174312 (2011); G. Cazzoli, A. Baldacci, A. Baldan, and C. Puzzarini, Mol. Phys. 109, 2245 (2011)] enabled us to derive a semi-experimental equilibrium structure for fluoroiodomethane by means of a least-squares fit procedure using the available experimental ground-state rotational constants together with computed vibrational corrections. Problems related to the missing isotopic substitution of fluorine and iodine were overcome thanks to the availability of an accurate theoretical equilibrium geometry (computed at the coupled-cluster singles and doubles level augmented by a perturbative treatment of triple excitations).

  14. Gender determination from diagnostic factors on anteroposterior pelvic radiographs

    Directory of Open Access Journals (Sweden)

    Azadeh Memarian

    2017-03-01

    Conclusion: The results of this study revealed that the evaluation of the radiographic images of pelvic bones by assessing the mentioned factors can be useful for sex determination from skeletal remains. However, ethical considerations should also be taken into account while using these factors.

  15. Propagation/depropagation equilibrium and structural factors in the radiation degradation of poly(olefin sulfone)s

    International Nuclear Information System (INIS)

    Bowmer, T.N.; O'Donnell, J.H.

    1981-01-01

    The principal volatile products observed after γ irradiation of nine different poly(olefin sulfone)s in the solid state were the two comonomers, i.e., the respective olefin and sulfur dioxide. An exponential increase in yield, G (volatile products), with increasing irradiation temperature, T/sub irr/, was observed for each copolymer through the ceiling temperature, T/sub c/, for the corresponding propagation/depropagation equilibrium. Thus the G value increased by ca. 3 orders of magnitude from T/sub irr/ = 0.7 T/sub c/ to T/sub irr/ = 1.3 T/sub c/ for all of the poly(olefin sulfone)s. Depropagation sensitivity was considered to be best measured by G(SO 2 ) since radiation induced, cationic homopolymerization of the product olefin occurred to a variable extent. Five of the poly(olefin sulfone)s had similar rates of depropagation at their respective T/sub c's/ but the polysulfones of 1-hexene, cyclohexene and 2-butene showed anomalously high depropagation rates. This may be related to greater steric hinderance to segmental chain mobility in the polysulfones of the 1,2 disubstituted olefins. Poly(1-hexene sulfone) appears to be anomalous, as in other respects

  16. Equilibrium dialysis-ligand exchange: adaptation of the method for determination of conditional stability constants of radionuclide-fulvic acid complexes

    International Nuclear Information System (INIS)

    Glaus, M.A.; Hummel, W.; Van Loon, L.R.

    1995-01-01

    The equilibrium dialysis-ligand exchange technique (EDLE) is used to determine conditional stability constants for the complexation of metal ions with humic acid, particularly in high pH solutions. Here, this technique has been adapted to measure conditional stability constants with fulvic acid. Fulvic acid permeates across all membranes during the experiment. The quantities involved therefore have to be determined analytically and taken into account when calculating the conditional stability constants. Co(II) and Laurentian Soil fulvic (LFA) acid were selected as a test system in order to investigate the time scale required to establish chemical and diffusion equilibria. After an incubation time of approximately two days, the conditional stability constants measured for the formation of Co-LFA-complexes are not time dependent, although across the whole time period investigated, LFA was still diffusing in increasing amounts across the dialysis membrane. This work demonstrates that the modified EDLE technique can be used in the determination of conditional metal stability constants of fulvic acid. (authors)

  17. Determination of equilibrium structures of bromothymol blue revealed by using quantum chemistry with an aid of multivariate analysis of electronic absorption spectra.

    Science.gov (United States)

    Shimada, Toru; Hasegawa, Takeshi

    2017-10-05

    The pH dependent chemical structures of bromothymol blue (BTB), which have long been under controversy, are determined by employing a combined technique of multivariate analysis of electronic absorption spectra and quantum chemistry. Principle component analysis (PCA) of the pH dependent spectra apparently reveals that only two chemical species are adequate to fully account for the color changes, with which the spectral decomposition is readily performed by using augmented alternative least-squares (ALS) regression analysis. The quantity variation by the ALS analysis also reveals the practical acid dissociation constant, pK a '. The determination of pK a ' is performed for various ionic strengths, which reveals the thermodynamic acid constant (pK a =7.5) and the number of charge on each chemical species; the yellow form is negatively charged species of -1 and the blue form that of -2. On this chemical information, the quantum chemical calculation is carried out to find that BTB molecules take the pure quinoid form in an acid solution and the quinoid-phenolate form in an alkaline solution. The time-dependent density functional theory (TD-DFT) calculations for the theoretically determined chemical structures account for the peak shift of the electronic spectra. In this manner, the structures of all the chemical species appeared in equilibrium have finally been confirmed. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Determination of equilibrium structures of bromothymol blue revealed by using quantum chemistry with an aid of multivariate analysis of electronic absorption spectra

    Science.gov (United States)

    Shimada, Toru; Hasegawa, Takeshi

    2017-10-01

    The pH dependent chemical structures of bromothymol blue (BTB), which have long been under controversy, are determined by employing a combined technique of multivariate analysis of electronic absorption spectra and quantum chemistry. Principle component analysis (PCA) of the pH dependent spectra apparently reveals that only two chemical species are adequate to fully account for the color changes, with which the spectral decomposition is readily performed by using augmented alternative least-squares (ALS) regression analysis. The quantity variation by the ALS analysis also reveals the practical acid dissociation constant, pKa‧. The determination of pKa‧ is performed for various ionic strengths, which reveals the thermodynamic acid constant (pKa = 7.5) and the number of charge on each chemical species; the yellow form is negatively charged species of - 1 and the blue form that of - 2. On this chemical information, the quantum chemical calculation is carried out to find that BTB molecules take the pure quinoid form in an acid solution and the quinoid-phenolate form in an alkaline solution. The time-dependent density functional theory (TD-DFT) calculations for the theoretically determined chemical structures account for the peak shift of the electronic spectra. In this manner, the structures of all the chemical species appeared in equilibrium have finally been confirmed.

  19. Removal of malathion from aqueous solution using De-Acidite FF-IP resin and determination by UPLC-MS/MS: equilibrium, kinetics and thermodynamics studies.

    Science.gov (United States)

    Naushad, Mu; Alothman, Z A; Khan, M R

    2013-10-15

    In the present study, De-Acidite FF-IP resin was used to remove a highly toxic and persistent organophosphorus pesticide (malathion) from the aqueous solution. Batch experiments were performed as a function of various experimental parameters such as effect of pH (2-10), contact time (10-120 min), resin dose (0.05-0.5 g), initial malathion concentration (0.5-2.5 µg mL(-1)) and temperature (25-65°C). The concentration of malathion was determined using a sensitive, selective and rapid ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method. The uptake rate of malathion on De-Acidite FF-IP resin was rapid and equilibrium established within 40 min. Kinetics studies showed better applicability for pseudo-second-order model. The equilibrium data was fitted to Langmuir and Freundlich isotherm models and the isotherm constants were calculated for malathion. The values of thermodynamic parameters (ΔG(0), ΔH(0) and ΔS(0)) were computed from the Van't Hoff plot of lnKC vs. 1/T which showed that the adsorption of malathion was feasible, endothermic and spontaneous. The regeneration studies were carried out which demonstrated a decrease in the recovery of malathion from 95% to 68% after five consecutive cycles. Breakthrough and exhaustive capacities of malathion were found to be 1.25 mg g(-1) and 3.5 mg g(-1), respectively. © 2013 Elsevier B.V. All rights reserved.

  20. Factors determining early internationalization of entrepreneurial SMEs: Theoretical approach

    Directory of Open Access Journals (Sweden)

    Agne Matiusinaite

    2015-12-01

    Full Text Available Purpose – This study extends the scientific discussion of early internationalization of SMEs. The main purpose of this paper – to develop a theoretical framework to investigate factors determining early internationalization of international new ventures. Design/methodology/approach – The conceptual framework is built on the analysis and synthesis of scientific literature. Findings – This paper presents different factors, which determine early internationalization of international new ventures. These factors are divided to entrepreneurial, organizational and contextual factors. We argue that early internationalization of international new ventures is defined by entrepreneurial characteristics and previous experience of the entrepreneur, opportunities recognition and exploitation, risk tolerance, specific of the organization, involvement into networks and contextual factors. Study proved that only interaction between factors and categories has an effect for business development and successful implementation of early internationalization. Research limitations/implications – The research was conducted on the theoretical basis of scientific literature. The future studies could include a practical confirmation or denial of such allocation of factors. Originality/value – The originality of this study lies in the finding that factor itself has limited effect to early internationalization. Only the interoperability of categories and factors gives a positive impact on early internationalization of entrepreneurial SMEs.

  1. Determination of r Factor of Kalbach-Mann Systematics for Energy Balance

    International Nuclear Information System (INIS)

    Zhang Jingshang

    2008-01-01

    Kalbach-Mann systematics is a very useful formula to discrete the double-differential cross sections of emitted particles. However, the energy balance by using this systematics is still a task to be studied. In the form of Legendre polynomial expansion the energy balance has been proved analytically. In terms of this approach, the formula to determine the pre-equilibrium fraction r factor of Kalbach-Mann systematics has been obtained for keeping energy balance strictly. This formula could be straightforwardly applied for describing the double-differential cross sections of all projectile types in the continuum spectrum emissions. It indicates that Legendre expansion coefficient with l = 1 is the key term in the energy balance

  2. Binary and ternary solid-liquid phase equilibrium for the systems formed by succinic acid, urea and diethylene glycol: Determination and modelling

    International Nuclear Information System (INIS)

    Li, Yanxun; Li, Congcong; Han, Shuo; Zhao, Hongkun

    2017-01-01

    Highlights: • Solubility of succinic acid in diethylene glycol was determined. • Solubility of succinic acid + urea + diethylene glycol was determined. • Three ternary phase diagrams were constructed for the ternary system. • The ternary phase diagrams were correlated using NRTL model. - Abstract: In this work, the solid-liquid phase equilibrium for binary system of succinic acid + diethylene glycol at the temperatures ranging from (298.15 to 333.15) K and ternary system of (succinic acid + urea + diethylene glycol) at 298.15 K, 313.15 K and 333.15 K was built by using the isothermal saturation method under atmospheric pressure (101.2 kPa), and the solubilities were determined by a high-performance liquid chromatography. The solid-phases formed in the ternary system of ((succinic acid + urea + diethylene glycol)) were confirmed by Schreinemaker’s method of wet residue, which corresponded to urea, succinic acid, and adduct 2:1 urea-succinic acid (mole ratio). Three isothermal phase diagrams for the ternary system were constructed based on the measured mutual solubility. Each isothermal phase diagram included six crystallization fields, three invariant curves, two invariant points and two co-saturated points. The crystalline region of adduct 2:1 urea-succinic acid is larger than those of the other two solids. The solubility of succinic acid in diethylene glycol was correlated with the modified Apelblat equation, λh equation and NRTL model; and the mutual solubility of the ternary ((succinic acid + urea + diethylene glycol)) system was correlated and calculated by the NRTL model. The interaction parameters’ values of succinic acid-urea were acquired. The value of RMSD was 7.11 × 10 −3 for the ternary system. The calculation results had good agreement with the experiment values. Furthermore, the densities of equilibrium liquid phase were acquired. The phase diagrams and the thermodynamic model of the ternary system could provide the basis for design of

  3. The Customers’ Determinant Factors of the Bank Selection

    Directory of Open Access Journals (Sweden)

    Umbas Krisnanto

    2011-04-01

    Full Text Available Some previous researchers are still arguing about the factors that determine the selection of a bank. These factors depend on the intensity of marketing activities undertaken by the bank, reputation of the bank, credit availability, friendly staffs, appropriate interest rates, and location. Jakarta was selected for the research location since Jakarta is the biggest city in Indonesia that represents the advancement of the banking industry. Different statistics tools are applied to find the accurate opinion why respondent choose a bank. Based on the results, the research concludes factors that determine in selecting a bank tend to be based on the secondary factors such as recommendation from friends, and advice from family members.

  4. The Customers’ Determinant Factors of the Bank Selection

    Directory of Open Access Journals (Sweden)

    Umbas Krisnanto

    2011-04-01

    Full Text Available Some previous researchers are still arguing about the factors that determine the selection of a bank. These factors depend on the intensity of marketing activities undertaken by the bank, reputation of the bank, credit availability, friendly staffs, appropriate interest rates, and location. Jakarta was selected for the research location since Jakarta is the biggest city in Indonesia that represents the advancement of the banking industry. Different statistics tools are applied to find the accurate opinion why respondent choose a bank. Based on the results, the research concludes factors that determine in selecting a bank tend to be based on the secondary factors such as recommendation from friends, and advice from family members..

  5. On determination of the degree of dissociation of hydrogen in non-equilibrium plasmas by means of emission spectroscopy: II. Experimental verification

    International Nuclear Information System (INIS)

    Lavrov, B P; Lang, N; Pipa, A V; Roepcke, J

    2006-01-01

    The method of spectroscopic determination of the degree of dissociation of hydrogen in non-equilibrium plasma, proposed in our previous paper, was verified under various plasma conditions. Three different gas discharges have been used, namely: (i) a DC-arc discharge (ii) an RF discharge, f = 200 kHz and (iii) an MW discharge, f = 2.45 GHz, under pressure p = 0.3-8 mbar. Relative intensities of atomic and molecular spectroscopic lines, the H α and H β line and the (2-2)Q1 line of the Fulcher-α system, and the gas temperature were measured in a wide range of discharge conditions and used for the determination of the degree of dissociation of hydrogen. It is shown that the method leads to plausible results in the whole range of discharge conditions studied in this paper. In particular, for the first time an influence of the redistribution of the population density of excited hydrogen atoms among fine structure sublevels on values of the degree of dissociation of hydrogen obtained by the method was investigated experimentally. It is also shown, that the influence is rather significant. The assumption of Boltzmann populations of the sublevels is more appropriate than neglecting the redistribution after electron impact excitation for p > 1 mbar

  6. Factors determining the oxygen consumption rate (VO2) on-kinetics in skeletal muscles.

    Science.gov (United States)

    Korzeniewski, Bernard; Zoladz, Jerzy A

    2004-05-01

    Using a computer model of oxidative phosphorylation developed previously [Korzeniewski and Mazat (1996) Biochem. J. 319, 143-148; Korzeniewski and Zoladz (2001) Biophys. Chem. 92, 17-34], we analyse the effect of several factors on the oxygen-uptake kinetics, especially on the oxygen consumption rate (VO2) and half-transition time t(1/2), at the onset of exercise in skeletal muscles. Computer simulations demonstrate that an increase in the total creatine pool [PCr+/-Cr] (where Cr stands for creatine and PCr for phosphocreatine) and in glycolytic ATP supply lengthen the half-transition time, whereas increase in mitochondrial content, in parallel activation of ATP supply and ATP usage, in oxygen concentration, in proton leak, in resting energy demand, in resting cytosolic pH and in initial alkalization decrease this parameter. Theoretical studies show that a decrease in the activity of creatine kinase (CK) [displacement of this enzyme from equilibrium during on-transient (rest-to-work transition)] accelerates the first stage of the VO2 on-transient, but slows down the second stage of this transient. It is also demonstrated that a prior exercise terminated a few minutes before the principal exercise shortens the transition time. Finally, it is shown that at a given ATP demand, and under conditions where CK works near the thermodynamic equilibrium, the half-transition time of VO2 kinetics is determined by the amount of PCr that has to be transformed into Cr during rest-to-work transition; therefore any factor that diminishes the difference in [PCr] between rest and work at a given energy demand will accelerate the VO2 on-kinetics. Our conclusions agree with the general idea formulated originally by Easterby [(1981) Biochem. J. 199, 155-161] that changes in metabolite concentrations determine the transition times between different steady states in metabolic systems.

  7. Determining the Factors Affecting Labor Productivity of Nurses

    OpenAIRE

    Yurdanur Dikmen; Dilek Kara Yilmaz; Handenur Basaran; Nasibe Yagmur Filiz

    2016-01-01

    Aim: This study was conducted to determine the factors affecting the labor productivity of nurses. Material and Methods: The study which was planned as descriptive and analytical was carried out with 156 nurses who volunteered to participate in the study in a public hospital in the northwest of Turkey. Data was collected with the and ldquo;Participant Presentation Form and rdquo; and the questionnaire including the factors affecting labor productivity which was developed by Ozkoc (2005). ...

  8. Non-equilibrium effects in the plasmas

    International Nuclear Information System (INIS)

    Einfeld, D.

    1975-01-01

    Radial dependences of non-equilibrium effects of a He plasma were studied in a wall-stabilized short-time discharge. The electron density (nsub(e) = 2.5 x 10 22 m -3 ), the electron temperature and the equilibrium shift were determined by calculations of the continuum beam density and the beam densities of one He-I and one He-II line, respectively. In the discharge axis, the overpopulation factors of the ground state of He-I and He-II are about 75. As the distance to the axis increases, they increase for He-I and decrease for He-II. Except for the usual errors of measurement, the overpopulation factors found here correspond to those calculated from the balance equations (Drawin). (orig./AK) [de

  9. Environmental Performance in Countries Worldwide: Determinant Factors and Multivariate Analysis

    Directory of Open Access Journals (Sweden)

    Isabel Gallego-Alvarez

    2014-11-01

    Full Text Available The aim of this study is to analyze the environmental performance of countries and the variables that can influence it. At the same time, we performed a multivariate analysis using the HJ-biplot, an exploratory method that looks for hidden patterns in the data, obtained from the usual singular value decomposition (SVD of the data matrix, to contextualize the countries grouped by geographical areas and the variables relating to environmental indicators included in the environmental performance index. The sample used comprises 149 countries of different geographic areas. The findings obtained from the empirical analysis emphasize that socioeconomic factors, such as economic wealth and education, as well as institutional factors represented by the style of public administration, in particular control of corruption, are determinant factors of environmental performance in the countries analyzed. In contrast, no effect on environmental performance was found for factors relating to the internal characteristics of a country or political factors.

  10. Bayesian CP Factorization of Incomplete Tensors with Automatic Rank Determination.

    Science.gov (United States)

    Zhao, Qibin; Zhang, Liqing; Cichocki, Andrzej

    2015-09-01

    CANDECOMP/PARAFAC (CP) tensor factorization of incomplete data is a powerful technique for tensor completion through explicitly capturing the multilinear latent factors. The existing CP algorithms require the tensor rank to be manually specified, however, the determination of tensor rank remains a challenging problem especially for CP rank . In addition, existing approaches do not take into account uncertainty information of latent factors, as well as missing entries. To address these issues, we formulate CP factorization using a hierarchical probabilistic model and employ a fully Bayesian treatment by incorporating a sparsity-inducing prior over multiple latent factors and the appropriate hyperpriors over all hyperparameters, resulting in automatic rank determination. To learn the model, we develop an efficient deterministic Bayesian inference algorithm, which scales linearly with data size. Our method is characterized as a tuning parameter-free approach, which can effectively infer underlying multilinear factors with a low-rank constraint, while also providing predictive distributions over missing entries. Extensive simulations on synthetic data illustrate the intrinsic capability of our method to recover the ground-truth of CP rank and prevent the overfitting problem, even when a large amount of entries are missing. Moreover, the results from real-world applications, including image inpainting and facial image synthesis, demonstrate that our method outperforms state-of-the-art approaches for both tensor factorization and tensor completion in terms of predictive performance.

  11. Gated equilibrium bloodpool scintigraphy

    International Nuclear Information System (INIS)

    Reinders Folmer, S.C.C.

    1981-01-01

    This thesis deals with the clinical applications of gated equilibrium bloodpool scintigraphy, performed with either a gamma camera or a portable detector system, the nuclear stethoscope. The main goal has been to define the value and limitations of noninvasive measurements of left ventricular ejection fraction as a parameter of cardiac performance in various disease states, both for diagnostic purposes as well as during follow-up after medical or surgical intervention. Secondly, it was attempted to extend the use of the equilibrium bloodpool techniques beyond the calculation of ejection fraction alone by considering the feasibility to determine ventricular volumes and by including the possibility of quantifying valvular regurgitation. In both cases, it has been tried to broaden the perspective of the observations by comparing them with results of other, invasive and non-invasive, procedures, in particular cardiac catheterization, M-mode echocardiography and myocardial perfusion scintigraphy. (Auth.)

  12. Determination of Parachute Joint Factors using Seam and Joint Testing

    Science.gov (United States)

    Mollmann, Catherine

    2015-01-01

    This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

  13. Determinant factors influencing efficiency of Fadama Arable crop ...

    African Journals Online (AJOL)

    ... farm income, output, productivity and farm size and determined factors influencing Fadama farmer's efficiency. The multistage sampling technique was employed in the selection of120 Fadama farmers and their location. One hundred and twenty non-Fadama farmers were drawn using the same technique for comparison.

  14. Hurdles for sport consumption? Determining factors of household sports expenditure

    NARCIS (Netherlands)

    Erik Thibaut; Steven Vos; Jeroen Scheerder

    2013-01-01

    The purpose of this article is to explore the determining factors of household expenditures on sports participation. Due to a relatively large amount of zero-expenditures, simple regression methods are not suited. Because of methodological reasons, the two-step Heckman approach is used over the

  15. Numerical Determination of Crack Opening and Closure Stress Intensity Factors

    DEFF Research Database (Denmark)

    Ricardo, Luiz Carlos Hernandes

    2009-01-01

    The present work shows the numerical determination of fatigue crack opening and closure stress intensity factors of a C(T) specimen under variable amplitude loading using a finite element method. A half compact tension C(T) specimen, assuming plane stress constraint was used by finite element...

  16. Factors determining the choice of a place of delivery among ...

    African Journals Online (AJOL)

    85 (60.7%) chose to deliver in the hospital, while 55 (39.3%) opted for home delivery in the index pregnancy. Determinants of choice of delivery place include cost of hospital bill ... thus achieving the millennium development goals (MDGs) 4 and 5. Keywords: Factors, delivery, birth attendants, pregnant women, MDGs ...

  17. Determination of seismic performance factors for CLT shear wall systems

    Science.gov (United States)

    M. Omar Amini; John W. van de Lindt; Douglas Rammer; Shiling Pei; Philip Line; Marjan Popovski

    2016-01-01

    This paper presents selected results of connector testing and wall testing which were part of a Forest Products Lab-funded project undertaken at Colorado State University in an effort to determine seismic performance factors for cross laminated timber (CLT) shear walls in the United States. Archetype development, which is required as part of the process, is also...

  18. The Five-Factor Model and Self-Determination Theory

    DEFF Research Database (Denmark)

    Olesen, Martin Hammershøj; Thomsen, Dorthe Kirkegaard; Schnieber, Anette

    This study investigates conceptual overlap vs. distinction between individual differences in personality traits, i.e. the Five-Factor Model; and Self-determination Theory, i.e. general causality orientations. Twelve-hundred-and-eighty-seven freshmen (mean age 21.71; 64% women) completed electronic...

  19. Folic acid supplementation is not the sole factor in determining ...

    African Journals Online (AJOL)

    Folic acid supplementation is not the sole factor in determining neural tube defects: The possible role of autoantibodies. Keat Wei Loo, Siew Hua Gan. Abstract. Neural tube defects (NTDs) are severe but common congenital malformations. Neonates who suffer from NTDs may experience long-term complications throughout ...

  20. Determination of risk factors and level of awareness of caprine ...

    African Journals Online (AJOL)

    In Oju, goats are the major livestock kept and there is a well established goat market held every five days. This study was aimed at determining the risk factors associated with caprine brucellosis and assessing level of awareness amongst goat owners in Oju Local Government Area (LGA) of Benue State using a structured ...

  1. Helical axis stellarator equilibrium model

    International Nuclear Information System (INIS)

    Koniges, A.E.; Johnson, J.L.

    1985-02-01

    An asymptotic model is developed to study MHD equilibria in toroidal systems with a helical magnetic axis. Using a characteristic coordinate system based on the vacuum field lines, the equilibrium problem is reduced to a two-dimensional generalized partial differential equation of the Grad-Shafranov type. A stellarator-expansion free-boundary equilibrium code is modified to solve the helical-axis equations. The expansion model is used to predict the equilibrium properties of Asperators NP-3 and NP-4. Numerically determined flux surfaces, magnetic well, transform, and shear are presented. The equilibria show a toroidal Shafranov shift

  2. Determining the Factors Affecting Labor Productivity of Nurses

    Directory of Open Access Journals (Sweden)

    Yurdanur Dikmen

    2016-12-01

    Results: It was found that the 45.5% of nurses participated in the study were in the 23-53 age group, 79.5% were women, 76.9% married, 41.1% associate degree graduates. 42.3% of nurses' durations of professional experience were 0-5 years, 22.4% of nurses were clinical chief, 69.2% were working as shifts. Participants believe that the factors affecting the labor productivity were respectively organizational factors, ergonomic factors and personal factors. When organizational factors was examined; nurses stated that the lack of working personnel in the section, the low wages and unequal wages for the same work, the long working hours and the system which based on personal relations instead of merit were affecting productivity. The factors affecting labor productivity of nurses were not different according to age, gender, education level and marital status (p>0.05, but different according to mode of operation and years of experience (p<0.05. Conclusion: According to this study, it was found that there are many factors that affect the efficiency of the nurses. The most important factors affecting nurses' efficiency were determined as wage and working conditions. [J Contemp Med 2016; 6(4.000: 334-342

  3. Risk Factors as Major Determinants of Resilience: A Replication Study.

    Science.gov (United States)

    Eshel, Yohanan; Kimhi, Shaul; Lahad, Mooli; Leykin, Dmitry; Goroshit, Marina

    2018-03-16

    The present study was conducted in the context of current concerns about replication in psychological research. It claims that risk factors should be regarded as an integral part of the definition of individual resilience, which should be defined in terms of the balance between individual strength or protective factors, and individual vulnerability or risk factors (IND-SVR). Five independent samples, including 3457 Israeli participants, were employed to determine the effects of resilience promoting and resilience suppressing variables on the IND-SVR index of resilience, and on its two components: recovery from adversity, and distress symptoms. Five path analyses were employed for determining the role of distress symptoms as a measure of psychological resilience, as compared to other indices of this resilience. Results indicated the major role of risk factors (distress symptoms) as an integral component of resilience. This role was generally replicated in the five investigated samples. Risk factors are legitimate, valid, and useful parts of the definition of psychological resilience. Resilience research has shifted away from studying individual risk factors to investigating the process through which individuals overcome the hardships they experience. The present data seem to suggest that this shift should be reexamined.

  4. Recovery from equipment failures in ATC: Determination of contextual factors

    International Nuclear Information System (INIS)

    Subotic, Branka; Ochieng, Washington Y.; Straeter, Oliver

    2007-01-01

    Human reliability assessment (HRA) currently uses various approaches to determine and quantify human error. These approaches are increasingly being employed in various safety-critical domains, such as air traffic management and its ground component air traffic control. HRA research over the years has shown the important role of the context in which human errors take place. Recent techniques now put more emphasis on the definition of key contextual factors and their impact on the reliability of human performance. This paper presents a review of the current understanding of contextual factors in various industries. It uses this together with results from controller interviews to identify the contextual factors relevant to controller recovery from equipment failures in air traffic control. These factors should be used in conjunction with an appropriate method to analyse the performance of a controller during the process of recovery from failures

  5. Determinant Factors of Green Marketing Adoption in the Hospitality Sector

    Directory of Open Access Journals (Sweden)

    Liviu B. Vlad

    2016-11-01

    Full Text Available Green marketing is falling into the category of answers provided by the business world to the requirement to combine the economic development with the preservation of natural resources which represents a pressing concern of the modern times. In this context, the hospitality sector is facing as well an increasing pressure to pay attention to environmental issues, hotel organizations are increasingly tending to use environmentally friendly products and services, and to implement programs to manage energy and water consumption and waste. The adoption of green marketing in hospitality industry is significantly facilitated by internal and external factors. The paper focuses on the analysis of determinant internal factors: first and foremost on the pro-environmental behavior of the hotel managers and employees, and also on the already implemented green practices in the daily hotel activity. The implementation of green marketing strategies further examined being taken into account the organizational change theory, discloses a third determinant factor, namely, to what extent the process of changing is prepared. This paper is advancing an integrated model of determinant internal factors of green marketing implementation in the hospitality sector. The proposed research model has been tested and validated after analyzing the data collected in a quantitative research conducted on 330 managers and employees from the hospitality industry in Romania. The results show that the three predictors - pro-environmental behavior, current green practices and the change readiness - are having a significant influence on the implementation of green marketing.

  6. A local factorization of the fermion determinant in lattice QCD

    Energy Technology Data Exchange (ETDEWEB)

    Ce, Marco [Scuola Normale Superiore, Pisa (Italy); INFN, Pisa (Italy); Giusti, Leonardo [Milano-Bicocca Univ. (Italy). Dipartimento di Fisica; INFN, Milano-Bicocca (Italy); Schaefer, Stefan [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany). John von Neumann-Inst. fuer Computing NIC

    2016-09-15

    We introduce a factorization of the fermion determinant in lattice QCD with Wilson-type fermions that leads to a bosonic action which is local in the block fields. The interaction among gauge fields on distant blocks is mediated by multiboson fields located on the boundaries of the blocks. The resultant multiboson domain-decomposed hybrid Monte Carlo passes extensive numerical tests carried out by measuring standard gluonic observables. The combination of the determinant factorization and of the one of the propagator, that we put forward recently, paves the way for multilevel Monte Carlo integration in the presence of fermions. We test this possibility by computing the disconnected correlator of two flavor-diagonal pseudoscalar densities, and we observe a significant increase of the signal-to-noise ratio due to a two-level integration.

  7. Equilibrium ignition for ICF capsules

    International Nuclear Information System (INIS)

    Lackner, K.S.; Colgate, S.A.; Johnson, N.L.; Kirkpatrick, R.C.; Menikoff, R.; Petschek, A.G.

    1993-01-01

    There are two fundamentally different approaches to igniting DT fuel in an ICF capsule which can be described as equilibrium and hot spot ignition. In both cases, a capsule which can be thought of as a pusher containing the DT fuel is imploded until the fuel reaches ignition conditions. In comparing high-gain ICF targets using cryogenic DT for a pusher with equilibrium ignition targets using high-Z pushers which contain the radiation. The authors point to the intrinsic advantages of the latter. Equilibrium or volume ignition sacrifices high gain for lower losses, lower ignition temperature, lower implosion velocity and lower sensitivity of the more robust capsule to small fluctuations and asymmetries in the drive system. The reduction in gain is about a factor of 2.5, which is small enough to make the more robust equilibrium ignition an attractive alternative

  8. Factors that determine development of the ability to draw

    Directory of Open Access Journals (Sweden)

    Jorge Luis Dahik Cabrera

    2016-03-01

    Full Text Available In this investigation, the necessary factors are determined to structure a drawing representing an object, a brief description of the functions of the cerebral hemispheres, the theory of multiple bits of intelligence Gardner, capacities of representation and perception involved in the skill is reviewed and ability to draw. This work aims to be the beginning of a larger study, where they plan to measure the ability to draw in students, in order to experiment with alternative methodologies for teaching drawing.

  9. Determining Factors for Fast Corneal Sensitivity Recovery After Pterygium Excision

    OpenAIRE

    Julio Morán, Gemma; Campos, Pamela; Pujol Vives, Pere; Munguia, Aitana; Mas Aixalà, Enric

    2016-01-01

    Purpose: To establish determining factors for fast corneal sensitivity (CS) recovery after pterygium excision. Methods: Thirty-two eyes of 14 males and 18 females with primary nasal pterygium were recruited. Differences in CS (in the 4 quadrants and the center using a Cochet–Bonnet esthesiometer), pterygium corneal area (PCA), tear osmolarity, tear break-up time, Schirmer test, and ocular symptoms were analyzed before and 1 month after lesion excision. The relationship between CS recovery...

  10. Determining organizational information needs: the Critical Success Factors approach.

    Directory of Open Access Journals (Sweden)

    2001-01-01

    Full Text Available Reports on a series of investigations in the UK and Finland, in both academic and business institutions. The Critical Success Factors approach is defined and explored as a means of determining the information needs of organizations, rather than of individuals. Concludes that such use is appropriate and productive, enabling the identification of types of information that may aid the organization in its strategic policy making to achieve competitive advantage.

  11. Practical criterion for the determination of translation factors

    International Nuclear Information System (INIS)

    Riera, A.

    1984-01-01

    Following an idea of Rankin and Thorson, a method is proposed to determine translation factors in the molecular model of atomic collisions, and for low and intermediate nuclear velocities. The method is based on the minimization of a measure of all (electrostatic and dynamical) couplings between the states included in, and those left out from, the molecular expansion. The properties of this measure are discussed. In particular, its evaluation involves the calculation of a few new matrix elements, and this can be performed analytically when Gaussian-type orbitals are used to construct the wave functions. The method also provides a comparison between all approaches that employ translation factors, and a test of the conditions that are usually enforced on these factors

  12. Practical criterion for the determination of translation factors

    Energy Technology Data Exchange (ETDEWEB)

    Riera, A.

    1984-11-01

    Following an idea of Rankin and Thorson, a method is proposed to determine translation factors in the molecular model of atomic collisions, and for low and intermediate nuclear velocities. The method is based on the minimization of a measure of all (electrostatic and dynamical) couplings between the states included in, and those left out from, the molecular expansion. The properties of this measure are discussed. In particular, its evaluation involves the calculation of a few new matrix elements, and this can be performed analytically when Gaussian-type orbitals are used to construct the wave functions. The method also provides a comparison between all approaches that employ translation factors, and a test of the conditions that are usually enforced on these factors.

  13. EMPLOYMENT LEVEL ANALYSIS FROM THE DETERMINANT FACTORS PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    Elena Diana ŞERB

    2016-02-01

    Full Text Available Neglecting the human factor as part of the labor market causes losses for society as any activity that is initiated within it, has as a starting point, and also as a finishing point, the human intervention. The starting point of the article is represented by the projections made by the European    Commission in the Population Ageing Report in 2015 underlying assumptions and projections, and also by the projections of the United Nations report in 2015, and this resulted in many conclusions including the one that for the first time in Romania the average aging in 2015 exceeds the values measured by EU till present day, and this is reflected in the employment level (active aging population. The hypothesis behind the article is that the evolution of the population and migrants has repercussions on employment. Structured in three parts: knowledge status, the analysis of employment indicators and information about the intensity and direction of the link between a number of factors and employment level, this article aims to establish the determinant factors of employment through a research focused on the analysis of secondary sources, and also using the regression model. The most important lesson learned as a result of this research is that the labor market works with a variety of factors with a higher or lower influence, and in turn the labor market influences other factors.

  14. Liquid-liquid equilibrium of water + PEG 8000 + magnesium sulfate or sodium sulfate aqueous two-phase systems at 35°C: experimental determination and thermodynamic modeling

    Directory of Open Access Journals (Sweden)

    B. D. Castro

    2005-09-01

    Full Text Available Liquid-liquid extraction using aqueous two-phase systems is a highly efficient technique for separation and purification of biomolecules due to the mild properties of both liquid phases. Reliable data on the phase behavior of these systems are essential for the design and operation of new separation processes; several authors reported phase diagrams for polymer-polymer systems, but data on polymer-salt systems are still relatively scarce. In this work, experimental liquid-liquid equilibrium data on water + polyethylene glycol 8000 + magnesium sulfate and water + polyethylene glycol 8000 + sodium sulfate aqueous two-phase systems were obtained at 35°C. Both equilibrium phases were analyzed by lyophilization and ashing. Experimental results were correlated with a mass-fraction-based NRTL activity coefficient model. New interaction parameters were estimated with the Simplex method. The mean deviations between the experimental and calculated compositions in both equilibrium phases is about 2%.

  15. Step Complexity Measure for Emergency Operating Procedures - Determining Weighting Factors

    International Nuclear Information System (INIS)

    Park, Jinkyun; Jung, Wondea; Kim, Jaewhan; Ha, Jaejoo

    2003-01-01

    In complex systems, such as nuclear power plants (NPPs) or airplane control systems, human error has been regarded as the primary cause of many events. Therefore, to ensure system safety, extensive effort has been made to identify the significant factors that can cause human error. According to related studies, written manuals or operating procedures are revealed as one of the important factors, and the understandability is pointed out as one of the major reasons for procedure-related human errors.Many qualitative checklists have been suggested to evaluate emergency operating procedures (EOPs) of NPPs so as to minimize procedure-related human errors. However, since qualitative evaluations using checklists have some drawbacks, a quantitative measure that can quantify the complexity of EOPs is indispensable.From this necessity, Park et al. suggested the step complexity (SC) measure to quantify the complexity of procedural steps included in EOPs. To verify the appropriateness of the SC measure, averaged step performance time data obtained from emergency training records of the loss-of-coolant accident (LOCA) and the excess steam demand event were compared with estimated SC scores. However, although averaged step performance time data and estimated SC scores show meaningful correlation, some important issues such as determining proper weighting factors have to be clarified to ensure the appropriateness of the SC measure. These were not properly dealt with due to a lack of backup data.In this paper, to resolve one of the important issues, emergency training records are additionally collected and analyzed in order to determine proper weighting factors. The total number of collected records is 66, and the training scenarios cover five emergency conditions including the LOCA, the steam generator tube rupture, the loss of all feedwater, the loss of off-site power, and the station blackout. From these records, average step performance time data are retrieved, and new

  16. Significant Factors Determining E-government Adoption in Selangor, Malaysia

    Directory of Open Access Journals (Sweden)

    Siti Hajar Mohd Idris

    2016-06-01

    Full Text Available Studies have shown that low adoption rate among citizens has been hindering the optimization of e-Government services especially in developing countries. Hence, one of the critical measures that has to be undertaken is to identify and overcome possible barriers to further facilitate a higher rate of adoption. A multistage stratified sampling was used in this study to collect data from 1000 respondents, both user and non-user residing in the state of Selangor, Malaysia. This state was chosen as to provide a better understanding of low adoption when issues of basic facilities have been successfully overcome. An exploratory factor analysis was performed to identify latent constructs and seven key factors were identified. A multiple regression model was subsequently used to analyze significant factors in determining the willingness to use e-Government services. The determinants are language barrier, educational level, secure, format, easy to use, enjoyable, reliable, visual appeal and infrastructure. The result shows significant variables that act as barriers to adoption are reliable, enjoyable, easy to use, secure, and language used. The constraints pointed out in the open ended questions mainly focus on the issue of accessibility, ease of use and awareness. Overcoming these obstacles is therefore crucial in order to enhance the usage of e-Government services which consequently will improve the quality of public administration in Malaysia.

  17. Determination of the separation factor of uranium isotopes by gaseous diffusion

    International Nuclear Information System (INIS)

    Bilous, O.; Counas, G.

    1958-01-01

    A 12-stage pilot separation cascade with a low output has been constructed to measure the separation factor of uranium isotopes by gaseous diffusion. The report describes some of the separation results obtained, and also provides information on the time necessary for equilibrium to be established and on the influence of various perturbations on the pressure profile in the cascade. (author) [fr

  18. Equilibrium Droplets on Deformable Substrates: Equilibrium Conditions.

    Science.gov (United States)

    Koursari, Nektaria; Ahmed, Gulraiz; Starov, Victor M

    2018-05-15

    Equilibrium conditions of droplets on deformable substrates are investigated, and it is proven using Jacobi's sufficient condition that the obtained solutions really provide equilibrium profiles of both the droplet and the deformed support. At the equilibrium, the excess free energy of the system should have a minimum value, which means that both necessary and sufficient conditions of the minimum should be fulfilled. Only in this case, the obtained profiles provide the minimum of the excess free energy. The necessary condition of the equilibrium means that the first variation of the excess free energy should vanish, and the second variation should be positive. Unfortunately, the mentioned two conditions are not the proof that the obtained profiles correspond to the minimum of the excess free energy and they could not be. It is necessary to check whether the sufficient condition of the equilibrium (Jacobi's condition) is satisfied. To the best of our knowledge Jacobi's condition has never been verified for any already published equilibrium profiles of both the droplet and the deformable substrate. A simple model of the equilibrium droplet on the deformable substrate is considered, and it is shown that the deduced profiles of the equilibrium droplet and deformable substrate satisfy the Jacobi's condition, that is, really provide the minimum to the excess free energy of the system. To simplify calculations, a simplified linear disjoining/conjoining pressure isotherm is adopted for the calculations. It is shown that both necessary and sufficient conditions for equilibrium are satisfied. For the first time, validity of the Jacobi's condition is verified. The latter proves that the developed model really provides (i) the minimum of the excess free energy of the system droplet/deformable substrate and (ii) equilibrium profiles of both the droplet and the deformable substrate.

  19. arXiv Local multiboson factorization of the quark determinant

    CERN Document Server

    Cè, Marco; Schaefer, Stefan

    2018-01-01

    We discuss the recently proposed multiboson domain-decomposed factorization of the gauge-field dependence of the fermion determinant in lattice QCD. In particular, we focus on the case of a lattice divided in an arbitrary number of thick time slices. As a consequence, multiple space-time regions can be updated independently. This allows to address the exponential degradation of the signal-to-noise ration of correlation functions with multilevel Monte Carlo sampling. We show numerical evidence of the effectiveness of a two-level integration for pseudoscalar propagators with momentum and for vector propagators, in a two active regions setup. These results are relevant to lattice computation of the hadronic contributions to the anomalous magnetic moment of the muon and to heavy meson decay form factors.

  20. Factors determining esthetic outcome after breast cancer conservative treatment

    DEFF Research Database (Denmark)

    Cardoso, Maria J; Cardoso, Jaime; Santos, Ana C

    2007-01-01

    with lower body mass index (BMI) and premenopausal status obtained better cosmetic results. In the group of tumor- and treatment-related factors, larger removed specimens, clearly visible scars, the use of chemotherapy and longer follow-up period were associated with less satisfactory results......The aim of this study was to evaluate the factors that determine esthetic outcome after breast cancer conservative treatment, based on a consensual classification obtained with an international consensus panel. Photographs were taken from 120 women submitted to conservative unilateral breast cancer...... surgery (with or without axillary surgery) and radiotherapy. The images were sent to a panel of observers from 13 different countries and consensus on the classification of esthetic result (recorded as excellent, good, fair or poor) was obtained in 113 cases by means of a Delphi method. For each patient...

  1. Determination of the deuterium separation factor between ammonia and hydrogen

    International Nuclear Information System (INIS)

    Ravoire, J.; Grandcollot, P.; Dirian, G.; Montel, J.

    1963-01-01

    The separation factors between hydrogen and gaseous ammonia (α g ) and between hydrogen and liquid ammonia (α l ) have been determined by experimental measurements and by calculations from spectrographic data, using existing data concerning the separation factor between liquid ammonia and gaseous ammonia (α v ). The values of α v , α g and α l are given in a table for a temperature range between - 70 deg C and + 40 deg C. The following equations have been established: log α g = 218 ± 1/T - 0.1841, from - 70 deg. C to + 40 deg. C. log α g = 216 ± 1/T + Q, valid at every temperature, Q being known as a function of temperature. log α l = 233 ± 1/T - 0.2283, from - 70 deg. C a -25 deg. C. (authors) [fr

  2. Determination of shielding factors for typical buildings in Brazil

    International Nuclear Information System (INIS)

    Salinas, Isabel Cristina Poquet

    2006-10-01

    This study presents a methodology for the determination of the air kerma inside buildings due to contamination on the external surfaces and the shielding factors for the construction material to be used on emergency assessment systems for urban areas. The commonly used construction materials were simulated with the MCNP computer code. A special methodology to simulate the bricks with holes were developed, mixing all different regions into a single one, making the simulation easier and faster. The effective density and the attenuation coefficients for the 50-3000 keV energy range were determined. The effective protection for the bricks with no cement cover decreases by 40-50% for energies greater then 300 keV when compared to bricks covered on both sides. With the data made available it was possible to evaluate the influence of the construction materials densities and thickness on the exposure due to external surfaces contamination and to estimate the error on the dose when the shielding factor applied on the calculation differs from the more realistic ones. The shielding factors for three types of walls were determined for a five rooms house. Special protection procedures should be applied for houses built with bricks with no cement cover, because they are due to the double of the dose when compared to houses built with bricks two-sided cement covered. The influence of windows and doors were evaluated too. This work was developed at the IRD in order to provide information on the construction material commonly uses on building in Brazil. (author)

  3. Intrinsic factor in human amniotic fluid as determined by radioimmunoassay

    International Nuclear Information System (INIS)

    Wahlstedt, V.; Stenman, U.-H.; Ylinen, K.; Graesbeck, R.

    1983-01-01

    The intrinsic factor (IF) concentration in 55 human amniotic fluid specimens was determined by radioimmunoassay (RIA). The antiserum was produced by immunizing rabbits with the cobalamin-IF complex isolated from human gastric juice. The median concentration of IF was 0.17 nmol/l and the extreme values <0.07-2.51 nmol/l. Three specimens with a clearly elevated level (0.96, 1.11 and 2.51 nmol/l) were observed. The highest value was associated with a fetal malformation, viz. obstruction of the proximal gut. There was no evident correlation between the concentration of IF in amniotic fluid and gestational age. (author)

  4. DETERMINANT FACTORS OF THE CAPITAL STRUCTURE OF BRAZILIAN TECHNOLOGY COMPANIES

    Directory of Open Access Journals (Sweden)

    Camila Freitas Sant´Ana

    2015-12-01

    Full Text Available The purpose of this study is to identify determinant factors of the capital structure of Brazilian technology companies. The research was characterized as descriptive, document and quantitative, consisting of 21 companies in the communications, telecommunications and digital industry, according to the Exame magazine ranking. The analysis was established from 2009 to 2013 using panel data regression. The results indicate that the growth rate of capital and control type have a positive relationship with the general and long-term debt. However, it was found that company size, profitability and type of capital point to a negative relationship with the capital structure.

  5. Ion exchange equilibrium constants

    CERN Document Server

    Marcus, Y

    2013-01-01

    Ion Exchange Equilibrium Constants focuses on the test-compilation of equilibrium constants for ion exchange reactions. The book first underscores the scope of the compilation, equilibrium constants, symbols used, and arrangement of the table. The manuscript then presents the table of equilibrium constants, including polystyrene sulfonate cation exchanger, polyacrylate cation exchanger, polymethacrylate cation exchanger, polysterene phosphate cation exchanger, and zirconium phosphate cation exchanger. The text highlights zirconium oxide anion exchanger, zeolite type 13Y cation exchanger, and

  6. Determining the Current and Future Health of Low-Latitude Andean Glaciers Using an Equilibrium Line Altitude Model and Hypsometric Data from the Randolph Glacier Inventory

    Science.gov (United States)

    Malone, A.; MacAyeal, D. R.

    2015-12-01

    Mountain glaciers have been described as the water towers of world, and for many populations in the low-latitude South American Andes, glacial runoff is vital for agricultural, industrial, and basic water needs. Previous studies of low-latitude Andean glaciers suggest a precarious future due to contemporary warming. These studies have looked at trends in freezing level heights or observations of contemporary retreat. However, regional-scale understanding of low-latitude glacial responses to present and future climate change is limited, in part due to incomplete information about the extent and elevation distribution of low-latitude glaciers. The recently published Randolph Glacier Inventory (RGI) (5.0) provides the necessary information about the size and elevation distribution of low-latitude glaciers to begin such studies. We determine the contemporary equilibrium line altitudes (ELAs) for low-latitude Andean glaciers in the RGI, using a numerical energy balance ablation model driven with reanalysis and gridded data products. Contemporary ELAs tend to fall around the peak of the elevation histogram, with an exception being the southern-most outer tropical glaciers whose modeled ELAs tend to be higher than the elevation histogram for that region (see below figure). Also, we use the linear tends in temperature and precipitation from the contemporary climatology to extrapolate 21stcentury climate forcings. Modeled ELAs by the middle on the century are universally predicted to rise, with outer tropical ELAs rising more than the inner tropical glaciers. These trends continue through the end of the century. Finally, we explore how climate variables and parameters in our numerical model may vary for different warming scenarios from United Nation's IPCC AR5 report. We quantify the impacts of these changes on ELAs for various climate change trajectories. These results support previous work on the precarious future of low latitude Andean glaciers, while providing a richer

  7. Determinant Factors for Managing Innovation in the Malaysian Public Sector

    Directory of Open Access Journals (Sweden)

    Ab Rahman Zety Norhaiza

    2018-01-01

    Full Text Available Since 1991, the government has started the forces to encourage public sector to innovate in order to strengthen the capability and solve problems at workplace for the benefit of organization and its people. The focuses of this forces is to create value creation, encourage cost reduction, and provide services that meet aspirations and people's expectations through high impact ideas. However, to achieve these focuses, public sector faces few challenges that affect the management of innovation; which includes lack of leadership skills and poor innovative culture to stimulate innovation. Although there are various initiatives conducted to enhance the management innovation, the innovative performance is still less satisfactory. Therefore, this paper aims to discuss the determinant factors that affect managing innovation in the selected public sectors which consist of two categories; patron and executor agencies. Thematic approach was used to analyse the interview data. Findings from the interview suggested that in the organization, an employee especially a leader should show his full commitment towards innovative culture, he needs to be committed and supportive and communicate well with the employees and he also should provide attractive rewards to encourage the innovative culture for an effective management innovation. These determinant factors need to be considered as high significant for the public sector to develop new strategies or approaches in managing innovation towards sustaining their competitive advantages in a long term for the benefit of public.

  8. Quantity Constrained General Equilibrium

    NARCIS (Netherlands)

    Babenko, R.; Talman, A.J.J.

    2006-01-01

    In a standard general equilibrium model it is assumed that there are no price restrictions and that prices adjust infinitely fast to their equilibrium values.In case of price restrictions a general equilibrium may not exist and rationing on net demands or supplies is needed to clear the markets.In

  9. Determination of mixing factors for VVER-440 fuel assembly head

    Energy Technology Data Exchange (ETDEWEB)

    Tóth, S., E-mail: toth@reak.bme.hu [Institute of Nuclear Techniques, Budapest University of Technology and Economics, Műegyetem rkp. 9, H-1111 Budapest (Hungary); Aszódi, A. [Institute of Nuclear Techniques, Budapest University of Technology and Economics, Műegyetem rkp. 9, H-1111 Budapest (Hungary)

    2013-11-15

    CFD models have been developed for the heads of the old, the present and the new type VVER-440 fuel assemblies using the experience of a former validation process. With these models temperature distributions are investigated in the heads of some typical assemblies and the in-core thermocouple signals are calculated. The analyses show that the coolant mixing is intensive but not-perfect in the assembly heads. The difference between the thermocouple signal and the cross-sectional average temperature at the measurement level depends on the assembly type. Using the results of these CFD calculations the weight factors of the rod bundle regions for the in-core thermocouple have been determined. With these factors the thermocouple signals are estimated and the results are statistically tested using the registered data of the Hungarian nuclear power plant. This test shows that the deviations between the measured and the calculated temperatures can be significantly decreased and consequently monitoring uncertainties can be reduced with using the weight factors.

  10. DETERMINANT FACTORS OF FINANCIAL REPORTING QUALITY AND ECONOMIC CONSEQUENCES

    Directory of Open Access Journals (Sweden)

    Zaenal Fanani

    2017-03-01

    Full Text Available The aim of this research was to prove empirically the determining factors that influence the quality of financialreporting and the economic consequences, and there were influence differences of quality attributes of financialreporting to the economic consequences. The research samples were taken by purposive sampling so it obtained141 listed manufacturing businesses from 2001 to 2006. The research used four data analysis technique:auxiliary regression R2, confirmatory factor analysis, simple regression, and multiple regressions. The resultsshowed seven attributes, there were five attributes that gave contribution for financial reporting quality namelyaccrual quality, predictability, smoothness, relevance value, and conservatism while the persistence and timelinessgave small contribution. The five attributes were also different each other. From the thirteen determiningfactors, it showed nine factors that produced significant influences namely operation cycle, sales volatility,firm size, firm age, loss proportion, leverage, environmental risk, institutional ownership, market concentration,and auditor quality, while the other three, they were liquidity, managerial ownership, and investmentgrowth that were not significant. Testing results of economic consequences of quality of financial reportingshowed that the quality of factorial financial reporting influenced negatively and significantly toward informationasymmetry.

  11. METHOD FOR DETERMINING THE MAXIMUM ARRANGEMENT FACTOR OF FOOTWEAR PARTS

    Directory of Open Access Journals (Sweden)

    DRIŞCU Mariana

    2014-05-01

    Full Text Available By classic methodology, designing footwear is a very complex and laborious activity. That is because classic methodology requires many graphic executions using manual means, which consume a lot of the producer’s time. Moreover, the results of this classical methodology may contain many inaccuracies with the most unpleasant consequences for the footwear producer. Thus, the costumer that buys a footwear product by taking into consideration the characteristics written on the product (size, width can notice after a period that the product has flaws because of the inadequate design. In order to avoid this kind of situations, the strictest scientific criteria must be followed when one designs a footwear product. The decisive step in this way has been made some time ago, when, as a result of powerful technical development and massive implementation of electronical calculus systems and informatics, This paper presents a product software for determining all possible arrangements of a footwear product’s reference points, in order to automatically acquire the maximum arrangement factor. The user multiplies the pattern in order to find the economic arrangement for the reference points. In this purpose, the user must probe few arrangement variants, in the translation and rotate-translation system. The same process is used in establishing the arrangement factor for the two points of reference of the designed footwear product. After probing several variants of arrangement in the translation and rotation and translation systems, the maximum arrangement factors are chosen. This allows the user to estimate the material wastes.

  12. Income- and energy-taxation for redistribution in general equilibrium

    International Nuclear Information System (INIS)

    FitzRoy, F.R.

    1993-01-01

    In a 3-factor General Equilibrium (GE)-model with a continuum of ability, the employed choose optimal labour supply, and equilibrium unemployment is determined by benefits funded by wage- and energy-taxes. Aggregate labour and the net wage may increase or decrease with taxation (and unemployment), and conditions for a reduction in redistributive wage-taxes to be Pareto-improving are derived. A small energy tax always raises the net wage, providing the wage tax is reduced to maintain constant employment and a balanced budget. High ability households prefer higher energy taxes when externalities are uniformly distributed and non-distorting. (author)

  13. Factors determining the viability of radiation processing in developing countries

    International Nuclear Information System (INIS)

    Linde, H.J. van der

    1988-01-01

    In the fifteen years since the introduction of radiation processing to South Africa, four commercial irradiation facilities have been established. These are involved in the processing of a large variety of products, from syringes and prostheses to strawberries and sugar yeast. Three of the facilities are devoted mainly to food irradiation and several thousand tonnes are now processed annually. During this period it was repeatedly experienced that the successful introduction of radiation processing in general, and food radurization in particular, on a commercial scale was critically dependent on the following factors: acceptance by the producer, industry and consumer; initial capital expenditure; running costs and overheads in general; and continuous throughput. All of these factors contribute to the processing cost which is the ultimate factor in determining the value/price ratio for the potential entrepreneur and customer of this new technology. After a market survey had identified the need for a new food irradiation facility to cope with the growing interest in commercial food radurization in the Western Cape, the above-mentioned factors were of cardinal importance in the design and manufacture of a new irradiator. The resulting batch-pallet facility which was commissioned in August 1986, is rather inefficient as far as energy utilization is concerned but this shortcoming is compensated for by its low cost, versatility and low hold-up. Although the facility has limitations as far as the processing of really large volumes of produce is concerned, it is particularly suitable not only for developing countries, but for developed countries in the introductory phase of commercial food radurization. (author)

  14. Shape characteristics of equilibrium and non-equilibrium fractal clusters.

    Science.gov (United States)

    Mansfield, Marc L; Douglas, Jack F

    2013-07-28

    It is often difficult in practice to discriminate between equilibrium and non-equilibrium nanoparticle or colloidal-particle clusters that form through aggregation in gas or solution phases. Scattering studies often permit the determination of an apparent fractal dimension, but both equilibrium and non-equilibrium clusters in three dimensions frequently have fractal dimensions near 2, so that it is often not possible to discriminate on the basis of this geometrical property. A survey of the anisotropy of a wide variety of polymeric structures (linear and ring random and self-avoiding random walks, percolation clusters, lattice animals, diffusion-limited aggregates, and Eden clusters) based on the principal components of both the radius of gyration and electric polarizability tensor indicates, perhaps counter-intuitively, that self-similar equilibrium clusters tend to be intrinsically anisotropic at all sizes, while non-equilibrium processes such as diffusion-limited aggregation or Eden growth tend to be isotropic in the large-mass limit, providing a potential means of discriminating these clusters experimentally if anisotropy could be determined along with the fractal dimension. Equilibrium polymer structures, such as flexible polymer chains, are normally self-similar due to the existence of only a single relevant length scale, and are thus anisotropic at all length scales, while non-equilibrium polymer structures that grow irreversibly in time eventually become isotropic if there is no difference in the average growth rates in different directions. There is apparently no proof of these general trends and little theoretical insight into what controls the universal anisotropy in equilibrium polymer structures of various kinds. This is an obvious topic of theoretical investigation, as well as a matter of practical interest. To address this general problem, we consider two experimentally accessible ratios, one between the hydrodynamic and gyration radii, the other

  15. Ranking of factors determining potassium mass balance in bicarbonate haemodialysis.

    Science.gov (United States)

    Basile, Carlo; Libutti, Pasquale; Lisi, Piero; Teutonico, Annalisa; Vernaglione, Luigi; Casucci, Francesco; Lomonte, Carlo

    2015-03-01

    One of the most important pathogenetic factors involved in the onset of intradialysis arrhytmias is the alteration in electrolyte concentration, particularly potassium (K(+)). Two studies were performed: Study A was designed to investigate above all the isolated effect of the factor time t on intradialysis K(+) mass balance (K(+)MB): 11 stable prevalent Caucasian anuric patients underwent one standard (∼4 h) and one long-hour (∼8 h) bicarbonate haemodialysis (HD) session. The latter were pair-matched as far as the dialysate and blood volume processed (90 L) and volume of ultrafiltration are concerned. Study B was designed to identify and rank the other factors determining intradialysis K(+)MB: 63 stable prevalent Caucasian anuric patients underwent one 4-h standard bicarbonate HD session. Dialysate K(+) concentration was 2.0 mmol/L in both studies. Blood samples were obtained from the inlet blood tubing immediately before the onset of dialysis and at t60, t120, t180 min and at end of the 4- and 8-h sessions for the measurement of plasma K(+), blood bicarbonates and blood pH. Additional blood samples were obtained at t360 min for the 8 h sessions. Direct dialysate quantification was utilized for K(+)MBs. Direct potentiometry with an ion-selective electrode was used for K(+) measurements. Study A: mean K(+)MBs were significantly higher in the 8-h sessions (4 h: -88.4 ± 23.2 SD mmol versus 8 h: -101.9 ± 32.2 mmol; P = 0.02). Bivariate linear regression analyses showed that only mean plasma K(+), area under the curve (AUC) of the hourly inlet dialyser diffusion concentration gradient of K(+) (hcgAUCK(+)) and AUC of blood bicarbonates and mean blood bicarbonates were significantly related to K(+)MB in both 4- and 8-h sessions. A multiple linear regression output with K(+)MB as dependent variable showed that only mean plasma K(+), hcgAUCK(+) and duration of HD sessions per se remained statistically significant. Study B: mean K(+)MBs were -86.7 ± 22.6 mmol

  16. Some factors determining the PCr recovery overshoot in skeletal muscle.

    Science.gov (United States)

    Korzeniewski, Bernard; Zoladz, Jerzy A

    2005-07-01

    It has been proposed recently that the phosphocreatine (PCr) overshoot (increase above the resting level) during muscle recovery after exercise is caused by a slow decay during this recovery of the direct activation of oxidative phosphorylation taking place during muscle work. In the present article the factors determining the appearance and size of the PCr overshoot are studied using the computer model of oxidative phosphorylation in intact skeletal muscle developed previously. It is demonstrated that the appearance and duration of this overshoot is positively correlated with the value of the characteristic decay time of the direct activation of oxidative phosphorylation. It is also shown that the size of PCr overshoot is increased by low resting PCr/Cr ratio (what is confirmed by our unpublished experimental data), by high intensity of the direct activation of oxidative phosphorylation, by high muscle work intensity and by low rate of the return of cytosolic pH to the resting value during muscle recovery.

  17. Factors determining conversion of laparoscopic to open cholecystectomy

    Directory of Open Access Journals (Sweden)

    Tapash Kumar Maitra

    2017-07-01

    Full Text Available Background and objectives:Laparoscopic cholecystectomy (LC has virtually replaced conventional open cholecystectomy (OC as the standard procedure of treatment for cholelithiasis and cholecystitis. However, OC sometimes becomes a necessity considering the feasibility and safety of the surgical procedure. But the factors that demand conversion from LC to OC differ widely. The present study aimed to determine the prevalence of conversion from LC to OC and to assess the causes of conversion and risk factors related to conversion. Methods: The study was conducted in a referral hospital – ‘Bangladesh Institute of Research and Rehabilitation in Diabetes, Endocrine and Metabolic Disorder (BIRDEM’ from September 2014 to September 2016. Cases of cholelithiasis with or without cholecystitis, and other gall bladder pathology were included in the study. A team of experienced surgeon performed LC of all selected cases. The causes of conversion to OC were systematically recorded by the surgical team and the risk factors (age, sex, obesity, history of previous abdominal surgery, gallbladder thickness related to conversion from LC to OC was investigated. Results: A total of 261 (M / F = 87 /174 patients were considered eligible for the study. The mean age of all patients was 43 (±1.75 years. For the male and female groups the mean ages were 44±1.9 and 42±1.6 years respectively. Of the total 261 cases, 210 (80.5% patients had cholelithiasis with chronic cholecystitis, 47 (18.0% had gallbladder stone plus acute cholecystitis and 4 (1.5% had gallbladder polyp. Open conversion was required in case of 19 patients. Thus, overall conversion rate was 7.3%. The common causes of conversion were a difficulty in defining Calot’s triangle (42.1%, b injury to cystic artery (21.1% and c injury to bile duct (15.8%. Both male and female had equal risk for conversion. The investigated risk factors like history of previous abdominal surgery, preoperative ERCP, acute

  18. Determinant Factors of Corporate Social Disclosures in Indonesia

    Directory of Open Access Journals (Sweden)

    Juniati Gunawan

    2013-06-01

    Full Text Available Indonesia as one of the big developing countries has been responding rapidly to the issue of Corporate Social Disclosure (CSD. This can be seen from the CSD section in the listed companies’ annual reports which keep increasing throughout the years. However, there are still inconclusive findings in factors that determine the extent of CSD. Based on a comprehensive research, therefore, this paper examines some selected factors in their relations to the extent of CSD, both quantitatively and qualitatively. Corporate annual reports for the year 2003 to 2006 were examined to verify the CSD practices by applying a content analysis method and multiple regression analysis. Then, firm’s characteristics (category, size, financial performances, age, and group influential (creditors, auditors, owners were analysed to seek their significant relationships to the extent of CSD. The findings show that (1 there was no significant influence of ‘company type’ to the extent of CSD; but ‘company status’ was significantl y influence CSD (2 ‘company size’, ‘financial performances’, ‘age’, and ‘auditors’ influences’ were found to have significant positi ve influences to the extent of CSD; (3 ‘Owners’ influence’ correlated positivel y rather than negati vely to CSD; and (4 Mixed results were provided by the ‘creditors’ influence’ throughout the years. The overall correlations between predictor and criterion variables are considered to be low to moderate, varied from 0.463 to 0.607 for correlation coefficients (R and 0.215 to 0.368 for determinant coefficients (R2 in the regression model.

  19. Biogastronomy: Factors that determine the biological response to meal ingestion.

    Science.gov (United States)

    Pribic, T; Azpiroz, F

    2018-02-02

    The biological response to a meal includes physiological changes, primarily related to the digestive process, and a sensory experience, involving sensations related to the homeostatic control of food consumption, eg, satiety and fullness, with a hedonic dimension, ie associated with changes in digestive well-being and mood. The responses to a meal include a series of events before, during and after ingestion. While much attention has been paid to the events before and during ingestion, relatively little is known about the postprandial sensations, which are key to the gastronomical experience. The aim of this narrative review is to provide a comprehensive overview and to define the framework to investigate the factors that determine the postprandial experience. Based on a series of proof-of-concept studies and related information, we propose that the biological responses to a meal depend on the characteristics of the meal, primarily its palatability and composition, and the responsiveness of the guest, which may be influenced by multiple previous and concurrent conditioning factors. This information provides the scientific backbone to the development of personalized gastronomy. © 2018 John Wiley & Sons Ltd.

  20. Confounding factors in determining causal soil moisture-precipitation feedback

    Science.gov (United States)

    Tuttle, Samuel E.; Salvucci, Guido D.

    2017-07-01

    Identification of causal links in the land-atmosphere system is important for construction and testing of land surface and general circulation models. However, the land and atmosphere are highly coupled and linked by a vast number of complex, interdependent processes. Statistical methods, such as Granger causality, can help to identify feedbacks from observational data, independent of the different parameterizations of physical processes and spatiotemporal resolution effects that influence feedbacks in models. However, statistical causal identification methods can easily be misapplied, leading to erroneous conclusions about feedback strength and sign. Here, we discuss three factors that must be accounted for in determination of causal soil moisture-precipitation feedback in observations and model output: seasonal and interannual variability, precipitation persistence, and endogeneity. The effect of neglecting these factors is demonstrated in simulated and observational data. The results show that long-timescale variability and precipitation persistence can have a substantial effect on detected soil moisture-precipitation feedback strength, while endogeneity has a smaller effect that is often masked by measurement error and thus is more likely to be an issue when analyzing model data or highly accurate observational data.

  1. Local Equilibrium and Retardation Revisited.

    Science.gov (United States)

    Hansen, Scott K; Vesselinov, Velimir V

    2018-01-01

    In modeling solute transport with mobile-immobile mass transfer (MIMT), it is common to use an advection-dispersion equation (ADE) with a retardation factor, or retarded ADE. This is commonly referred to as making the local equilibrium assumption (LEA). Assuming local equilibrium, Eulerian textbook treatments derive the retarded ADE, ostensibly exactly. However, other authors have presented rigorous mathematical derivations of the dispersive effect of MIMT, applicable even in the case of arbitrarily fast mass transfer. We resolve the apparent contradiction between these seemingly exact derivations by adopting a Lagrangian point of view. We show that local equilibrium constrains the expected time immobile, whereas the retarded ADE actually embeds a stronger, nonphysical, constraint: that all particles spend the same amount of every time increment immobile. Eulerian derivations of the retarded ADE thus silently commit the gambler's fallacy, leading them to ignore dispersion due to mass transfer that is correctly modeled by other approaches. We then present a particle tracking simulation illustrating how poor an approximation the retarded ADE may be, even when mobile and immobile plumes are continually near local equilibrium. We note that classic "LEA" (actually, retarded ADE validity) criteria test for insignificance of MIMT-driven dispersion relative to hydrodynamic dispersion, rather than for local equilibrium. Published 2017. This article is a U.S. Government work and is in the public domain in the USA.

  2. Fatores determinantes do crescimento infantil Determinant factors of infant growth

    Directory of Open Access Journals (Sweden)

    Sylvia de Azevedo Mello Romani

    2004-03-01

    Full Text Available Esta revisão enfoca os fatores que interferem no crescimento de crianças nos primeiros anos de vida. Foram utilizadas informações de artigos publicados em revistas científicas, teses e publicações de organizações internacionais. O crescimento infantil se constitui em um dos melhores indicadores de saúde da criança e o retardo estatural representa atualmente, a característica antropométrica mais representativa do quadro epidemiológico da desnutrição no Brasil. Ressaltando a importância do fator genético no crescimento, a revisão abrange com maior ênfase a atuação dos fatores extrínsecos, sabendo-se que o processo de crescimento resulta da interação entre a carga genética e os fatores do meio ambiente, os quais premitirão a maior ou menor expressão do potencial genético. Face a comprovada natureza multicausal do crescimento infantil, vários estudos têm sido desenvolvidos, buscando relacionar variáveis biológicas, socioeconômicas, maternas, ambientais, culturais, demográficas, nutricionais, entre outras, com a sua etiologia, seu desenvolvimento e sua manutenção. A revisão apresentada reforça o interesse em investigações sobre o crescimento na primeira infância que devem ser permanentes, devido, principalmente, às repercussões a longo prazo sobre a saúde infantil.This review focuses on factors interfering with growth during the first years of life. Information was collected from articles published in indexed scientific journals, theses, technical books and publications of international organizations. Infant growth is one of the best health indicators, and linear growth retardation is currently the most representative anthropometric characteristic of child nutrition epidemiology in Brazil. The review indicates the value of genetics in growth, focusing, however on the influence of the extrinsic factors. Growth process results from interaction between genetic and environmental factors, determining variation

  3. EDUCATIONAL PRODUCTION AS A DETERMINING FACTOR IN SOCIETY DEVELOPMENT

    Directory of Open Access Journals (Sweden)

    Tetiana Vlasyuk

    2016-11-01

    Full Text Available A new paradigm for economic development of higher educational institutions of Ukraine requires appropriate institutional support. The reality of domestic transients is the imperfection of institutions, which corresponds to the mixed economy of market type and adequately represents the norms and stereotypes of behavior in the spheres of income distribution regulation, employment, social security, health, education. The purpose of the paper is to study the role of educational production as a determining factor in economic development of society. Methodology. In the researching process general scientific and special methods of the studying processes and facts were used in their correlation and development. Among them: monographic – in the forming of the research subject and object; induction and deduction – in the determining of the means, objects of the labour and factor of educational production; the method of the systematic studying the business processes – in the determining of the interaction of the main components of the educational production. Results. The cause of any production is needs availability. To meet his needs the person should enter into business relations with other people that is the basis of market relations. A key resource of the economy, the main engine of development perform is the knowledge which is also an important criterion for successful adaptation of a man in society. Accordingly, in society, the role of education as a sphere of production, exchange, consumption of knowledge is increasing. The received knowledge, skills and other competences by the individual is the end result of educational process. Knowledge is one of the main elements of intellectual property and intellectual capital, and it contributes to the development of the macroenvironment, namely, labor and scientific potential of the state. Each high school, its scientific and innovative activity, its financial bases of development, depends on the

  4. The geographical factor in the determination of audit quality

    Directory of Open Access Journals (Sweden)

    Antonio Luis Duréndez Gómez-Guillamón

    2012-12-01

    Full Text Available The aim of this research paper is to analyze the role of the spatial factor in the determination of audit quality. Concretely, we hypothesize that audit quality is influenced by location and by the existence of spill-over effects generated by two factors: (1 the specialization and reputation of auditing firms and (2 the economic and institutional development of the audit firm’s location. We developed an empirical research to test the existence of such spatial effects (location and spill-over on a representative sample of the Spanish audit market. The study includes spatial econometric techniques taking into account the auditee specific characteristics, as well as other external factors. The findings highlight the relevance of including the spatial dimension when the audit quality is being studied. The results confirm the existence of a location effect according to the highest quality values are found in the most developed Spanish areas. Furthermore, we find a spatial spill-over effect among regions, affecting audit quality values. This effect confirms that audit quality within a location spreads to its surroundings. The results support the promotion of governmental policies leading to improve audit quality considering the spill-over effect.KEYWORDS: RESUMENEl objetivo de este artículo es analizar la influencia del factor geográfico en la determinación de la calidad de la auditoría. En concreto, la hipótesis que se plantea sostiene que la calidad de la auditoría se ve afectada por la ubicación y por la existencia de efectos indirectos generados por dos factores: (1 la especialización y la reputación de las firmas de auditoría y (2 el desarrollo económico e institucional de la provincia donde se localiza la firma de auditoría. Con este objetivo hemos desarrollado un estudio empírico para probar la existencia de tales efectos espaciales (ubicación y desbordamiento en una muestra representativa del mercado de auditoría español. El

  5. An experimental chamber simulating the equilibrium between radon and its daughters in mine air

    International Nuclear Information System (INIS)

    Domanski, T.; Chruscielewski, W.; Orzechowski, W.

    1981-01-01

    An experimental chamber simulating the equilibrium between radon and its daughters in uranium mine air is described. The apparatus is useful for testing track detectors, air samplers, masks and filters and for determining occupational exposures. Increasing the humidity of the chamber air and increasing the amounts of aerosol injected both increase the values of the equilibrium factor, F. The equilibrium in the chamber air decreases after the aerosol injection but by using controlled pulse injections it was shown that the stability of F could be maintained inside the chamber for 4 hours. Results are also given for the structure of the equilibrium between radon and its daughters Qsub(i)/Q 0 in the chamber air as a function of the chamber air factor F and also for the potential α-energy of unattached products in relation to the total α-potential energy of radon daughter products in the chamber air as a function of factor F. (U.K.)

  6. Rates and equilibrium constants of the ligand-induced conformational transition of an HCN ion channel protein domain determined by DEER spectroscopy.

    Science.gov (United States)

    Collauto, Alberto; DeBerg, Hannah A; Kaufmann, Royi; Zagotta, William N; Stoll, Stefan; Goldfarb, Daniella

    2017-06-14

    Ligand binding can induce significant conformational changes in proteins. The mechanism of this process couples equilibria associated with the ligand binding event and the conformational change. Here we show that by combining the application of W-band double electron-electron resonance (DEER) spectroscopy with microfluidic rapid freeze quench (μRFQ) it is possible to resolve these processes and obtain both equilibrium constants and reaction rates. We studied the conformational transition of the nitroxide labeled, isolated carboxy-terminal cyclic-nucleotide binding domain (CNBD) of the HCN2 ion channel upon binding of the ligand 3',5'-cyclic adenosine monophosphate (cAMP). Using model-based global analysis, the time-resolved data of the μRFQ DEER experiments directly provide fractional populations of the open and closed conformations as a function of time. We modeled the ligand-induced conformational change in the protein using a four-state model: apo/open (AO), apo/closed (AC), bound/open (BO), bound/closed (BC). These species interconvert according to AC + L ⇌ AO + L ⇌ BO ⇌ BC. By analyzing the concentration dependence of the relative contributions of the closed and open conformations at equilibrium, we estimated the equilibrium constants for the two conformational equilibria and the open-state ligand dissociation constant. Analysis of the time-resolved μRFQ DEER data gave estimates for the intrinsic rates of ligand binding and unbinding as well as the rates of the conformational change. This demonstrates that DEER can quantitatively resolve both the thermodynamics and the kinetics of ligand binding and the associated conformational change.

  7. Factors determining Gekkotan (Reptilia, Sauria distribution in Tunisia (North Africa

    Directory of Open Access Journals (Sweden)

    Wided Tlili

    2014-12-01

    Full Text Available Tunisian geckos count nine species (1 is insular relict, 1 is endemic, 2 are ubiquitous and 5 are enfeoffed. We aim to determine factors influencing their distributions. Surveys were founded on environmental divisions. Presence/absence data for 113 grids were analyzed using multivariate tools. 18 environmental variables were revealed and clustered into five factors to model species distributions. Established models were further projected on non-explored areas within Tunisian territory. The distribution of continental geckos follows an indirect bidirectional gradient; the South-northward one is physiologically stressful and the North-southward one is biologically stressful. Five biogeographic regions were established showing concordance with climatic and vegetation regionalization. The distribution of non-anthropophilic species is positively correlated to thermal amplitudes gradient. The distribution of anthropophilic taxa is positively correlated to agricultural land-use. Oasis, sebkhas and chotts are particular landscapes that disturb both distributions. Predicted areas follow the yielded distribution patterns despite some discrepancy for S. sthenodactylus. The niche characterizing shows that land use and altitude increase the probability of occurrence of H. turcicus and T. mauritanica. Alternatively, they decrease the probability of the presence of T. deserti, T. neglecta, T. tripolitanus and S. petrii. Models could also show that the absence of S. sthenodactylus in northern regions is attributed to high altitudes and cereal land-use. As to T. fascicularis, the displacement of the northern limits of its range is mostly attributed to an improvement of field investigations. Established model of its distribution shows a restricted area of probable occurrence in central Tunisia confirming its endemism.

  8. Dose rate determining factors of PWR primary water

    International Nuclear Information System (INIS)

    Terachi, Takumi; Kuge, Toshiharu; Nakano, Nobuo

    2014-01-01

    The relationship between dose rate trends and water chemistry has been studied to clarify the determining factors on the dose rates. Therefore dose rate trends and water chemistry of 11 PWR plants of KEPCO (Kansai Electric Power Co., Inc.) were summarized. It is indicated that the chemical composition of the oxide film, behaviour of corrosion products and Co-58/Co-60 ratio in the primary system have effected dose rate trends based on plant operation experiences for over 40 years. According to plant operation experiences, the amount of Co-58 has been decreasing with the increasing duration of SG (Steam Generator) usage. It is indicated that the stable oxide film formation on the inner surface of SG tubing, is a major beneficial factor for radiation sources reduction. On the other hand, the reduction of the amount of Co-60 for the long term has been not clearly observed especially in particular high dose plants. The primary water parameters imply that considering release and purification balance on Co-59 is important to prevent accumulation of source term in primary water. In addition, the effect of zinc injection, which relates to the chemical composition of oxide film, was also assessed. As the results, the amount of radioactive Co has been clearly decreased. The decreasing trend seems to correlate to the half-life of Co-60, because it is considered that the injected zinc prevents the uptake of radioactive Co into the oxide film on the inner surface of the components and piping. In this paper, the influence of water chemistry and the replacement experiences of materials on the dose rates were discussed. (author)

  9. Analysis of the unstressed lattice spacing, d0, for the determination of the residual stress in a friction stir welded plate of an age-hardenable aluminum alloy – Use of equilibrium conditions and a genetic algorithm

    International Nuclear Information System (INIS)

    Cioffi, F.; Hidalgo, J.I.; Fernández, R.; Pirling, T.; Fernández, B.; Gesto, D.; Puente Orench, I.; Rey, P.; González-Doncel, G.

    2014-01-01

    Procedures based on equilibrium conditions (stress and bending moment) have been used to obtain an unstressed lattice spacing, d 0 , as a crucial requirement for calculating the residual stress (RS) profile across a joint conducted on a 10 mm thick plate of age-hardenable AA2024 alloy by friction stir welding (FSW). Two procedures have been used that take advantage of neutron diffraction measurements. First, equilibrium conditions were imposed on sections parallel to the weld so that a constant d 0 value corresponding to the base material region could be calculated analytically. Second, balance conditions were imposed on a section transverse to the weld. Then, using the data and a genetic algorithm, suitable d 0 values for the different regions of the weld have been found. For several reasons, the comb method has proved to be inappropriate for RS determination in the case of age-hardenable alloys. However, the equilibrium conditions, together with the genetic algorithm, has been shown to be very suitable for determining RS profiles in FSW joints of these alloys, where inherent microstructural variations of d 0 across the weld are expected

  10. Factors determining family planning in Catalonia. Sources of inequity

    Directory of Open Access Journals (Sweden)

    Saurina Carme

    2012-07-01

    Full Text Available Abstract Introduction In recent decades, the foreign population in Spain has increased significantly, particularly for Catalonia, an autonomous region of Spain (2.90% in 2000 and 15.95% in 2010 and in particular Girona province (6.18% in 2000 and 21.55% in 2010. Several studies have shown a lower use of family planning methods by immigrants. This same trend is observed in Spain. The objective of this paper is to determine the existence of differences and possible sources of inequity in the use of family planning methods among health service users in Catalonia (Spain by sex, health status, place of birth and socioeconomic conditions. Methods Data were taken from an ad-hoc questionnaire which was compiled following a qualitative stage of individual interviews. Said questionnaire was administered to 1094 Catalan public health service users during 2007. A complete descriptive analysis was carried out for variables related to public health service users’ sociodemographic characteristics and variables indicating knowledge and use of family planning methods, and bivariate relationships were analysed by means of chi-square contrasts. Considering the use (or non-use of family planning methods as a dependent variable and a set of demographic, socioeconomic and health status variables as explanatory factors, the relationship was modelled using mixed models. Results The analysed sample is comprised of 54.3% women and 45.7% men, with 74.3% natives (or from the EU and 25.7% economic immigrants. 54.8% use some method of family planning, the condom (46.7% and the pill (28.0% being the two most frequently used methods. Statistical modelling indicates that those factors which most influence the use of family planning methods are level of education (30.59% and 39.29% more likelihood and having children over 14 (35.35% more likelihood. With regard to the origin of the user, we observe that patients from North Africa,sub. Saharan Africa and Asia are less likely to

  11. Factors determining family planning in Catalonia. Sources of inequity.

    Science.gov (United States)

    Saurina, Carme; Vall-Llosera, Laura; Saez, Marc

    2012-07-20

    In recent decades, the foreign population in Spain has increased significantly, particularly for Catalonia, an autonomous region of Spain (2.90% in 2000 and 15.95% in 2010) and in particular Girona province (6.18% in 2000 and 21.55% in 2010). Several studies have shown a lower use of family planning methods by immigrants. This same trend is observed in Spain. The objective of this paper is to determine the existence of differences and possible sources of inequity in the use of family planning methods among health service users in Catalonia (Spain) by sex, health status, place of birth and socioeconomic conditions. Data were taken from an ad-hoc questionnaire which was compiled following a qualitative stage of individual interviews. Said questionnaire was administered to 1094 Catalan public health service users during 2007. A complete descriptive analysis was carried out for variables related to public health service users' sociodemographic characteristics and variables indicating knowledge and use of family planning methods, and bivariate relationships were analysed by means of chi-square contrasts. Considering the use (or non-use) of family planning methods as a dependent variable and a set of demographic, socioeconomic and health status variables as explanatory factors, the relationship was modelled using mixed models. The analysed sample is comprised of 54.3% women and 45.7% men, with 74.3% natives (or from the EU) and 25.7% economic immigrants. 54.8% use some method of family planning, the condom (46.7%) and the pill (28.0%) being the two most frequently used methods. Statistical modelling indicates that those factors which most influence the use of family planning methods are level of education (30.59% and 39.29% more likelihood) and having children over 14 (35.35% more likelihood). With regard to the origin of the user, we observe that patients from North Africa,sub. Saharan Africa and Asia are less likely to use family planning methods (36.68%, 38.59% and 70

  12. Phase equilibrium engineering

    CERN Document Server

    Brignole, Esteban Alberto

    2013-01-01

    Traditionally, the teaching of phase equilibria emphasizes the relationships between the thermodynamic variables of each phase in equilibrium rather than its engineering applications. This book changes the focus from the use of thermodynamics relationships to compute phase equilibria to the design and control of the phase conditions that a process needs. Phase Equilibrium Engineering presents a systematic study and application of phase equilibrium tools to the development of chemical processes. The thermodynamic modeling of mixtures for process development, synthesis, simulation, design and

  13. Equilibrium and generators

    International Nuclear Information System (INIS)

    Balter, H.S.

    1994-01-01

    This work studies the behaviour of radionuclides when it produce a desintegration activity,decay and the isotopes stable creation. It gives definitions about the equilibrium between activity of parent and activity of the daughter, radioactive decay,isotope stable and transient equilibrium and maxim activity time. Some considerations had been given to generators that permit a disgregation of two radioisotopes in equilibrium and its good performance. Tabs

  14. Experimental determination of the Mo isotope fractionation factor between metal and silicate liquids

    Science.gov (United States)

    Hin, R. C.; Burkhardt, C.; Schmidt, M. W.; Bourdon, B.

    2011-12-01

    The conditions and chemical consequences of core formation have mainly been reconstructed from experimentally determined element partition coefficients between metal and silicate liquids. However, first order questions such as the mode of core formation or the nature of the light element(s) in the Earth's core are still debated [1]. In addition, the geocentric design of most experimental studies leaves the conditions of core formation on other terrestrial planets and asteroids even more uncertain than for Earth. Through mass spectrometry, records of mass-dependent stable isotope fractionation during high-temperature processes such as metal-silicate segregation are detectable. Stable isotope fractionation may thus yield additional constrains on core formation conditions and its consequences for the chemical evolution of planetary objects. Experimental investigations of equilibrium mass-dependent stable isotope fractionation have shown that Si isotopes fractionate between metal and silicate liquids at temperatures of 1800°C and pressures of 1 GPa, while Fe isotopes leave no resolvable traces of core formation processes [2,3]. Molybdenum is a refractory and siderophile trace element in the Earth, and thus much less prone to complications arising from mass balancing core and mantle and from potential volatile behaviour than other elements. To determine equilibrium mass-dependent Mo isotope fractionation during metal-silicate segregation, we have designed piston cylinder experiments with a basaltic silicate composition and an iron based metal with ~8 wt% Mo, using both graphite and MgO capsules. Metal and silicate phases are completely segregated by the use of a centrifuging piston cylinder at ETH Zurich, thus preventing analysis of mixed metal and silicate signatures. Molybdenum isotope compositions were measured using a Nu Instruments 1700 MC-ICP-MS at ETH Zurich. To ensure an accurate correction of analytical mass fractionation a 100Mo-97Mo double spike was admixed

  15. Determination of the equilibrium miscibility gap in the Pd-Rh alloy system using metal nanopowders obtained by decomposition of coordination compounds

    Energy Technology Data Exchange (ETDEWEB)

    Shubin, Yu.V., E-mail: shubin@niic.nsc.ru; Plyusnin, P.E.; Korenev, S.V.

    2015-02-15

    Highlights: • The Pd-Rh phase diagram has been experimentally reinvestigated. • The true equilibrium was achieved with the two-way approach. • The critical point of the miscibility gap lie at 58 at.% Rh and 820 °C. - Abstract: The Pd-Rh phase diagram has been reinvestigated in the subsolidus region using X-ray diffraction, scanning and transmission electron microscopy. The true equilibrium at the miscibility boundary was achieved with the two-way approach. Nanosized powders of metastable solid solutions and two-phase palladium-rhodium mixtures were used to shorten the time required to equilibrate the system. The initial samples were prepared by decomposition of coordination compounds [Pd(NH{sub 3}){sub 2}Cl{sub 2}], [Rh(NH{sub 3}){sub 5}Cl]Cl{sub 2}, [Pd(NH{sub 3}){sub 4}]{sub 3}[Rh(NO{sub 2}){sub 6}]{sub 2} and [Pd(NH{sub 3}){sub 4}][Rh(NH{sub 3})(NO{sub 2}){sub 5}]. The obtained phase diagram exhibits miscibility gap wider than generally accepted with the critical point of solubility at 58 at.% Rh and 820 °C.

  16. Analysis of equilibrium in a tokamak by the finite-difference method

    International Nuclear Information System (INIS)

    Kim, K.E.; Jeun, G.D.

    1983-01-01

    Ideal magnetohydrodynamic equilibrium in a Tokamak having a small radius with an elongated rectangular cross section is studied by applying the finite-difference method to the Grad-Shafranov equation to determine possible limitations for *b=8*pPsup(2)/Bsup(2). The coupled first-order differential equations resulting from the finite-difference Grad-Shafranov equation is solved by the numarical method:1)We concluded that equilibrium consideration alone gives no limitation even for *b approx.1. 2)We have obtained the equilibrium magnetic field configuration charcterized by a set of three parameters;the aspect ratio, *b,and the safety factor. (Author)

  17. Determining chance coincidence, survival factor and decay factor in 220Rn delayed coincidence measurement

    International Nuclear Information System (INIS)

    Huang Derong; Yan Yongjun; Zhou Jianliang; Qiu Shoukang

    2013-01-01

    The method and calculation formulas to determine the chance coincidence in the 220 Rn coincidence measurement are introduced in this paper. The poisson distribution is introduced to correct the chance coincidence. The relative deviation of the true coincidence between the method and the Giffin's is within 5% after the correction of the cohance coincidence. The measurement of 220 Rn is done by comparative measurement with RAD7. The results shows that 220 Rn can be measured by the method with a relative deviation of 14%. Mean while, for the 220 Rn flow regime is difficult to meet the condition of calculation formulas, a solution to solve the survival factor and decay factor is proposed and the error come from the useage of theoretical calculation formula is avoided. (authors)

  18. Determinants of the exclusive breastfeeding abandonment: psychosocial factors

    Directory of Open Access Journals (Sweden)

    Mariana Campos Martins Machado

    2014-12-01

    Full Text Available OBJECTIVE To assess the determinants of exclusive breastfeeding abandonment. METHODS Longitudinal study based on a birth cohort in Viçosa, MG, Southeastern Brazil. In 2011/2012, 168 new mothers accessing the public health network were followed. Three interviews, at 30, 60, and 120 days postpartum, with the new mothers were conducted. Exclusive breastfeeding abandonment was analyzed in the first, second, and fourth months after childbirth. The Edinburgh Postnatal Depression Scale was applied to identify depressive symptoms in the first and second meetings, with a score of ≥ 12 considered as the cutoff point. Socioeconomic, demographic, and obstetric variables were investigated, along with emotional conditions and the new mothers’ social network during pregnancy and the postpartum period. RESULTS The prevalence of exclusive breastfeeding abandonment at 30, 60, and 120 days postpartum was 53.6% (n = 90, 47.6% (n = 80, and 69.6% (n = 117, respectively, and its incidence in the fourth month compared with the first was 48.7%. Depressive symptoms and traumatic delivery were associated with exclusive breastfeeding abandonment in the second month after childbirth. In the fourth month, the following variables were significant: lower maternal education levels, lack of homeownership, returning to work, not receiving guidance on breastfeeding in the postpartum period, mother’s negative reaction to the news of pregnancy, and not receiving assistance from their partners for infant care. CONCLUSIONS Psychosocial and sociodemographic factors were strong predictors of early exclusive breastfeeding abandonment. Therefore, it is necessary to identify and provide early treatment to nursing mothers with depressive symptoms, decreasing the associated morbidity and promoting greater duration of exclusive breastfeeding. Support from health professionals, as well as that received at home and at work, can assist in this process.

  19. The determination of Exserohilum turcicum virulence factors in Serbia

    Directory of Open Access Journals (Sweden)

    Lević Jelena

    2008-01-01

    Full Text Available The determination of Exserohilum turcicum virulence factors and resistance responses of three sets of maize inbred lines (four differential, eight isogenic and 22 commercial inbreeds to three isolates of this pathogen under greenhouse conditions were studied. The maize inbreeds were selected according to previous testing of resistance based on lesion types in 194 inbreeds under field conditions of plant inoculation with the E. turcicum race 0 (designated as the isolate MRI-Et. The standard procedure was applied to obtained isolates MRIZP-1747 and MRIZP-1416 from resistant and susceptible lesion types, respectively. These lesions were developed on the same leaf of a plant of the experimental hybrid no. 163/99 grown in a nursery at Zemun Polje during 1999. The third isolate (MRIZP-1435 was isolated from a leaf sample originating from the location of Srbobran in which the occurrence of northern corn leaf blight (NCLB, caused by Exserohilum turcicum, was intensive. Based upon virulence/avirulence of three isolates of E. turcicum on differential maize inbred lines, it was found out that the isolate MRIZP-1747 could be classified as race 0, whereas isolates MRIZP-1416 and MRIZP-1435 could be classified as race 1. These are the first results that confirm the presence of race 1 of E. turcicum in Serbia. Not including differential lines, 22 and six lines were resistant to race 0 and race 1, respectively, while eight and five lines were resistant and susceptible to both races, respectively. All isogenic lines not containing the Ht gene were susceptible to both races 0 and 1.

  20. Fall Back Equilibrium

    NARCIS (Netherlands)

    Kleppe, J.; Borm, P.E.M.; Hendrickx, R.L.P.

    2008-01-01

    Fall back equilibrium is a refinement of the Nash equilibrium concept. In the underly- ing thought experiment each player faces the possibility that, after all players decided on their action, his chosen action turns out to be blocked. Therefore, each player has to decide beforehand on a back-up

  1. Certification of a second series of five hydrocarbon materials for the determination of equilibrium flashpoint (temperature ranges -10/sup 0/C to +5/sup 0/C and 80/sup 0/C to 135/sup 0/C)

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, D J; Gonska, H; Karcher, W

    1984-01-01

    The closed cup flashpoints of five pure hydrocarbon materials (iso-octane, toluene, n-dodecane, n-tetradecane and n-hexadecane) have been determined by equilibrium methods in an interlaboratory exercise, involving twelve laboratories of the European Community member countries and one laboratory of the Commission of the European Communities. The methods used were based on IP303/74 (or ASTM D3278-73; Rapid Tester) and IP304/74 (Abel, Abel-Pensky, Pensky-Martens Cups) with extension to allow equilibrium conditions to be maintained outside the ranges of these methods. For each hydrocarbon material, the numbers of individual measurements accepted have been between 81 and 92. As a result, the closed cup flashpoints of these materials by an equilibrium method are certified at the following temperatures: CRM No. Hydrocarbon Equilibrium closed cup flashpoint 83 iso-octane -9.5 +- 0.5/sup 0/C 84 toluene +6.0 +- 0.5/sup 0/C 85 n-dodecane +81.0 +- 1.0/sup 0/C 86 n-tetradecane +108.0 +- 1.0/sup 0/C 87 n-hexadecane +133.5 +- 1.0/sup 0/C. This report describes the experimental details of the interlaboratory measurements and the certification procedure. The procedure required extensions to be made to methods IP303/74 and IP304/74 which are given in detail and recommendations are made for the improvement of these methods over the temperature range covered by the flashpoint reference materials.

  2. Determination and thermodynamic modeling of solid–liquid phase equilibrium for 3,5-dichloroaniline in pure solvents and ternary 3,5-dichloroaniline + 1,3,5-trichlorobenzene + toluene system

    International Nuclear Information System (INIS)

    Li, Rongrong; Du, Cunbin; Meng, Long; Han, Shuo; Wang, Jian; Zhao, Hongkun

    2016-01-01

    Highlights: • Solubility of 3,5-dichloroaniline in seven organic solvents were determined. • Solid–liquid phase equilibrium for ternary system was measured. • The binary and ternary phase diagrams were constructed. • The phase diagrams were correlated with thermodynamic models. - Abstract: The solid–liquid phase equilibrium data for 3,5-dichloroaniline in n-propanol, isopropanol, n-butanol, isobutanol, toluene, ethyl acetate and acetone at (283.15 to 308.15) K were determined experimentally by gas chromatography under 101.3 kPa. The solubility of 3,5-dichloroaniline in these solvents decreased according to the following order: ethyl acetate > (acetone, toluene) for the solvents of ethyl acetate, acetone, and toluene; and for the other solvents, (isopropanol, n-butanol) > n-propanol > isobutanol. According to the solubility of 3,5-dichloroaniline in pure solvents, the solid–liquid phase equilibrium for the ternary mixture of 3,5-dichloroaniline + 1,3,5-trichlorobenzene + toluene were measured by using an isothermal saturation method at three temperatures of 283.15, 293.15, and 303.15 K under 101.3 kPa, and the corresponding isothermal phase diagrams were constructed. Two pure solids were formed in the ternary system at a fixed temperature, which were pure 3,5-dichloroaniline and pure 1,3,5-trichlorobenzene and were identified by Schreinemakers’ method of wet residue. The temperature dependence of 3,5-dichloroaniline solubility in pure solvents was correlated by the modified Apelblat equation, λh equation, Wilson model and NRTL model; and the ternary solid–liquid phase equilibrium of 3,5-dichloroaniline + 1,3,5-trichlorobenzene + toluene were described by the Wilson model and NRTL model. Results showed that calculated solubility values with these models agreed well with the experimental ones for the studied binary and ternary systems. The solid–liquid equilibrium and the thermodynamic models for the binary and ternary systems can offer the

  3. Determinants of serum brain-derived neurotrophic factor

    NARCIS (Netherlands)

    Bus, B. A. A.; Molendijk, M. L.; Penninx, B. J. W. H.; Buitelaar, J. K.; Kenis, G.; Prickaerts, J.; Elzinga, B. M.; Voshaar, R. C. Oude

    Background: Brain-derived neurotrophic factor (BDNF) belongs to the neurotrophin family of growth factors and affects the survival and plasticity of neurons in the adult central nervous system. The high correlation between cortical and serum BDNF levels has led to many human studies on BDNF levels

  4. Sci—Fri AM: Mountain — 01: Validation of a new formulism and the related correction factors on output factor determination for small photon fields

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yizhen; Younge, Kelly; Nielsen, Michelle; Mutanga, Theodore [Peel Regional Cancer Center, Trillium Health Partners, Mississauga, ON (Canada); Cui, Congwu [Peel Regional Cancer Center, Trillium Health Partners, Mississauga, ON (Canada); Department of Radiation Oncology, University of Toronto, Toronto, ON (Canada); Das, Indra J. [Radiation Oncology Dept., Indiana University- School of Medicine, Indianapolis, IN (United States)

    2014-08-15

    Small field dosimetry measurements including output factors are difficult due to lack of charged-particle equilibrium, occlusion of the radiation source, the finite size of detectors, and non-water equivalence of detector components. With available detectors significant variations could be measured that will lead to incorrect delivered dose to patients. IAEA/AAPM have provided a framework and formulation to correct the detector response in small photon fields. Monte Carlo derived correction factors for some commonly used small field detectors are now available, however validation has not been performed prior to this study. An Exradin A16 chamber, EDGE detector and SFD detector were used to perform the output factor measurement for a series of conical fields (5–30mm) on a Varian iX linear accelerator. Discrepancies up to 20%, 10% and 6% were observed for 5, 7.5 and 10 mm cones between the initial output factors measured by the EDGE detector and the A16 ion chamber, while the discrepancies for the conical fields larger than 10 mm were less than 4%. After the application of the correction, the output factors agree well with each other to within 1%. Caution is needed when determining the output factors for small photon fields, especially for fields 10 mm in diameter or smaller. More than one type of detector should be used, each with proper corrections applied to the measurement results. It is concluded that with the application of correction factors to appropriately chosen detectors, output can be measured accurately for small fields.

  5. Equilibrium and non-equilibrium phenomena in arcs and torches

    NARCIS (Netherlands)

    Mullen, van der J.J.A.M.

    2000-01-01

    A general treatment of non-equilibrium plasma aspects is obtained by relating transport fluxes to equilibrium restoring processes in so-called disturbed Bilateral Relations. The (non) equilibrium stage of a small microwave induced plasma serves as case study.

  6. A study to determine influential factors on data security

    Directory of Open Access Journals (Sweden)

    Naser Azad

    2014-01-01

    Full Text Available During the past few years, there has been increasing interest in making online transaction. As people become more interested in using internet for their daily business activities such as regular communications, financial transactions, etc., there will be more concerns on security of available data. In fact, data security is the primary concern in today’s online activities. This paper performs an empirical investigation to find important factors influencing data security in Municipality is city of Tehran, Iran. The survey uses factor analysis to find important factors using a questionnaire consist of 29 variables, which were reduced to 22 questions after considering skewness statistics. Cronbach alpha is calculated as 0.86, which validates the questionnaire. The survey detects six factors influencing feasibility study, organizational learning, management strategy, enterprise resource management, process approach and the acceptance.

  7. Environmental Factors that Determine Visual Skill Development of ...

    African Journals Online (AJOL)

    2017-10-26

    Oct 26, 2017 ... development and environmental risk factors influencing it provides useful guide for early ..... sporting activities, video games, and play with large mobile toys .... in the brain: Implications for explaining autism. Science. 2005 ...

  8. Determination of specificity influencing residues for key transcription factor families

    DEFF Research Database (Denmark)

    Patel, Ronak Y.; Garde, Christian; Stormo, Gary D.

    2015-01-01

    Transcription factors (TFs) are major modulators of transcription and subsequent cellular processes. The binding of TFs to specific regulatory elements is governed by their specificity. Considering the gap between known TFs sequence and specificity, specificity prediction frameworks are highly de...

  9. What Factors Determine the Uptake of A-level Physics?

    OpenAIRE

    Gill, Timothy; Bell, John F

    2011-01-01

    Abstract There has been much concern recently in the UK about the decline in the number of students studying physics beyond age 16. To investigate why this might be we used data from a national database of student qualifications and a multilevel modelling technique to investigate which factors had the greatest impact on the uptake of physics at Advanced Level (A-level) in a particular year. Each factor of interest was entered into a separate model, whilst accounting for prior attai...

  10. Equilibrium Fe isotope fractionation between inorganic aqueous Fe(III) and the siderophore complex, Fe(III)-desferrioxamine B

    DEFF Research Database (Denmark)

    Dideriksen, Knud; Baker, Joel A.; Stipp, Susan Louise Svane

    2008-01-01

    be controlled by isotope fractionation between the free and complexed iron.We have determined the equilibrium Fe isotope fractionation induced by organic ligand activity in experiments with solutions having co-existing inorganic Fe(III) species and siderophore complexes, Fedesferrioxamine B (at pH 2). The two......-type fractionation during precipitation, this experiment yielded an isotope fractionation factor of a56Fesolution-solid=1.00027. Calculations based on these results indicate that isotopic re-equilibration is unlikely to significantly affect our determined equilibrium Fe isotope fractionation between inorganically...... and organically complexed Fe. To determine the equilibrium Fe isotope fractionation between inorganically and organically bound Fe(III), experiments with variable proportions of inorganic Fe were carried out at 25 °C. Irrespective of the proportion of inorganic Fe, equilibrium fractionation factors were within...

  11. Summarizing description of the stereological equations to determine the stereometry factors of material microstructures

    International Nuclear Information System (INIS)

    Ondracek, G.

    1975-01-01

    The microstructure of a material can be determined quantitatively with the help of stereometric methods and described by stereometric factors. These are phase concentraction factor, form factor and orientation factor for the multiphase material. The determination of these parameters from stereometric measurements is discussed. (GSCH/LH) [de

  12. Burden and determinant factors of anemia among elementary ...

    African Journals Online (AJOL)

    Background: Anemia is an indicator of both poor nutrition and health. ... Intestinal parasitosis infections and hemoglobin level were determined by formula ... water, availability of latrine, maternal education, family size and hookworm infection.

  13. Reciprocal modulation of internal and external factors determines individual movements.

    Science.gov (United States)

    Martin, Jodie; van Moorter, Bram; Revilla, Eloy; Blanchard, Pierrick; Dray, Stéphane; Quenette, Pierre-Yves; Allainé, Dominique; Swenson, Jon E

    2013-03-01

    Movement is fundamental to individual and population dynamics, as it allows individuals to meet their basic requirements. Although movement patterns reflect interactions between internal and external factors, only few studies have examined the effects of these factors on movement simultaneously, and they generally focused on particular biological contexts (e.g. dispersal, foraging). However, the relative importance of these factors in driving individual routine movements might reflect a species' potential flexibility to cope with landscape changes and therefore buffer their potential impact on fitness. We used data from GPS collars on Scandinavian brown bears to investigate the relative role of these factors, as well as an additional factor (period of the year) on routine movements at two spatial scales (hourly and daily relocations). As expected, internal factors played a major role in driving movement, compared to external factors at both scales, but its relative importance was greater at a finer scale. In particular, the interaction between reproductive status and period of the year was one of the most influential variables, females being constrained by the movement capacity of their cubs in the first periods of the year. The effect of human disturbance on movement was also greater for females with cubs than for lone females. This study showed how reciprocal modulation of internal and external factors is shaping space use of brown bears. We stress that these factors should be studied simultaneously to avoid the risk of obtaining context-dependent inferences. Moreover, the study of their relative contribution is also highly relevant in the context of multiple-use landscapes, as human activities generally affect the landscape more than they affect the internal states of an individual. Species or individuals with important internal constraints should be less responsive to changes in their environment as they have less freedom from internal constraints and should

  14. Non-equilibrium Economics

    Directory of Open Access Journals (Sweden)

    Katalin Martinás

    2007-02-01

    Full Text Available A microeconomic, agent based framework to dynamic economics is formulated in a materialist approach. An axiomatic foundation of a non-equilibrium microeconomics is outlined. Economic activity is modelled as transformation and transport of commodities (materials owned by the agents. Rate of transformations (production intensity, and the rate of transport (trade are defined by the agents. Economic decision rules are derived from the observed economic behaviour. The non-linear equations are solved numerically for a model economy. Numerical solutions for simple model economies suggest that the some of the results of general equilibrium economics are consequences only of the equilibrium hypothesis. We show that perfect competition of selfish agents does not guarantee the stability of economic equilibrium, but cooperativity is needed, too.

  15. Safety and accessibility in use: risk factors and their determinants

    Directory of Open Access Journals (Sweden)

    Antonio Laurìa

    2014-10-01

    Full Text Available Accidents that occur in built spaces represent the result of the interaction of several factors. Some of these factors are attributable to the characteristics of the environment, others depend on the user and the ways in which the environment is used. The multifactorial nature of accidents explains why sectorial approaches represent a significant obstacle to the implementation of effective policies and intervention strategies for creating safer and more usable environments. The subject of this essay, that pays special attention to residential scenarios, is the description and classification of risk factors, that is, those environmental circumstances as well as individual and behavioural conditions that increase the frequency and / or magnitude of an accident. The article highlights the need for a comprehensive view of accidents as a cultural condition for an inclusive and safe design (technical prevention and effective information campaigns aimed at users (prevention in use.

  16. Equilibrium statistical mechanics

    CERN Document Server

    Mayer, J E

    1968-01-01

    The International Encyclopedia of Physical Chemistry and Chemical Physics, Volume 1: Equilibrium Statistical Mechanics covers the fundamental principles and the development of theoretical aspects of equilibrium statistical mechanics. Statistical mechanical is the study of the connection between the macroscopic behavior of bulk matter and the microscopic properties of its constituent atoms and molecules. This book contains eight chapters, and begins with a presentation of the master equation used for the calculation of the fundamental thermodynamic functions. The succeeding chapters highlight t

  17. Computing Equilibrium Chemical Compositions

    Science.gov (United States)

    Mcbride, Bonnie J.; Gordon, Sanford

    1995-01-01

    Chemical Equilibrium With Transport Properties, 1993 (CET93) computer program provides data on chemical-equilibrium compositions. Aids calculation of thermodynamic properties of chemical systems. Information essential in design and analysis of such equipment as compressors, turbines, nozzles, engines, shock tubes, heat exchangers, and chemical-processing equipment. CET93/PC is version of CET93 specifically designed to run within 640K memory limit of MS-DOS operating system. CET93/PC written in FORTRAN.

  18. Towards a dispersive determination of the pion transition form factor

    Science.gov (United States)

    Leupold, Stefan; Hoferichter, Martin; Kubis, Bastian; Niecknig, Franz; Schneider, Sebastian P.

    2018-01-01

    We start with a brief motivation why the pion transition form factor is interesting and, in particular, how it is related to the high-precision standard-model calculation of the gyromagnetic ratio of the muon. Then we report on the current status of our ongoing project to calculate the pion transition form factor using dispersion theory. Finally we present and discuss a wish list of experimental data that would help to improve the input for our calculations and/or to cross-check our results.

  19. Towards a dispersive determination of the pion transition form factor

    Directory of Open Access Journals (Sweden)

    Leupold Stefan

    2018-01-01

    Full Text Available We start with a brief motivation why the pion transition form factor is interesting and, in particular, how it is related to the high-precision standard-model calculation of the gyromagnetic ratio of the muon. Then we report on the current status of our ongoing project to calculate the pion transition form factor using dispersion theory. Finally we present and discuss a wish list of experimental data that would help to improve the input for our calculations and/or to cross-check our results.

  20. Performance related factors are the main determinants of the von Willebrand factor response to exhaustive physical exercise

    NARCIS (Netherlands)

    J.E. van Loon (Janine ); M.A.H. Sonneveld (Michelle); S.F.E. Praet (Stephan); M.P.M. de Maat (Moniek); F.W.G. Leebeek (Frank)

    2014-01-01

    textabstractBackground: Physical stress triggers the endothelium to release von Willebrand Factor (VWF) from the Weibel Palade bodies. Since VWF is a risk factor for arterial thrombosis, it is of great interest to discover determinants of VWF response to physical stress. We aimed to determine the

  1. What Factors Determine the Uptake of A-level Physics?

    Science.gov (United States)

    Gill, Tim; Bell, John F.

    2013-03-01

    There has been much concern recently in the UK about the decline in the number of students studying physics beyond age 16. To investigate why this might be we used data from a national database of student qualifications and a multilevel modelling technique to investigate which factors had the greatest impact on the uptake of physics at Advanced Level (A-level) in a particular year. Each factor of interest was entered into a separate model, while accounting for prior attainment and gender (both well-known predictors of A-level uptake). We found that factors associated with greater probability of uptake included better attainment in physics (or combined science) and maths qualifications at age 16 in comparison to other subjects, and (for girls only) attending an independent or grammar school. While it is difficult to address these factors directly, the results imply that more needs to be done to improve relative performance at General Certificate of Secondary Education, perhaps by increasing the supply of specialist physics teachers at this level and to overcome the perception (especially among girls) that physics is a particularly difficult subject.

  2. Determinants of factors influencing technical efficiency of cocoa ...

    African Journals Online (AJOL)

    This study examined the factors influencing technical efficiency of cocoa production in Ondo State, Nigeria using a stochastic frontier production function. Using the random sampling technique, well-structured questionnaire were used to elicit information from 120 cocoa farmers in Ondo State, Nigeria. The mean technical ...

  3. Determinant Factors of Attitude towards Quantitative Subjects: Differences between Sexes

    Science.gov (United States)

    Mondejar-Jimenez, Jose; Vargas-Vargas, Manuel

    2010-01-01

    Nowadays, almost all curricula in the social sciences contain at least one course in statistics, given the importance of this discipline as an analytical tool. This work identifies the latent factors relating to students' motivation and attitude towards statistics, tests their covariance structure for samples of both sexes, and identifies the…

  4. What determines the exchange rate: economic factors or market sentiment?

    OpenAIRE

    Gregory P. Hopper

    1997-01-01

    Do economic factors influence exchange rates? Or does market sentiment play a bigger role? Are short-run exchange rates predictable? Greg Hopper reviews exchange-rate economics, focusing on what is predictable and what isn't. He also examines the practical implications of exchange-rate theories for currency option pricing, risk management, and portfolio selection.

  5. What Factors Determine the Uptake of A-Level Physics?

    Science.gov (United States)

    Gill, Tim; Bell, John F.

    2013-01-01

    There has been much concern recently in the UK about the decline in the number of students studying physics beyond age 16. To investigate why this might be we used data from a national database of student qualifications and a multilevel modelling technique to investigate which factors had the greatest impact on the uptake of physics at Advanced…

  6. Factors Determining the Incidence of Suicide within Families

    Science.gov (United States)

    Farber, Maurice L.

    1977-01-01

    This paper addresses itself to the reasons why suicide tends to repeat in some families. Factors include entire family exposure to stresses, grief, and guilt induced by suicide, the provision of a model by the original suicide, suicidogenic interpersonal styles in families, suicidogenic child-rearing practice, and innate predispositions to…

  7. Financial reporting reliability concept and impact factors in its determination

    Directory of Open Access Journals (Sweden)

    Vygivska I.М.

    2017-03-01

    Full Text Available The article sets the goal to assess the reliability of financial reporting essence and summarize the factors that affect it. The article grounds the reliability of financial reporting urgency and characterizes its dual nature (on one hand, it is accounting containing reliable, reasonable data, characterized by the absence of errors and can be correctly perceived by users, on the other hand, reliable financial statements are considered to be formed according to the rules regulated by normative documents. It is proved that making decisions by interested users based on financial statements is closely related to information risk that arises because of the restrictions affect the flow of information on which management decisions are taken (accounting information that is difficult to understand by unskilled users, the impact of human factor, the level of information importance. The author establishes that the reliability of financial reporting is affected by many factors whose influence can be seen both outside, and within an enterprise. The main factors include: informational, political, legal, human, organizational and financial and they should be taken into account while making management decisions.

  8. Factors determining the use of botanical insect pest control methods ...

    African Journals Online (AJOL)

    A farm survey was conducted in three representative administrative districts of the Lake Victoria Basin (LVB), Kenya to document farmers' indigenous knowledge and the factors that influence the use of botanicals instead of synthetic insecticides in insect pest management. A total of 65 farm households were randomly ...

  9. Nonideal plasmas as non-equilibrium media

    International Nuclear Information System (INIS)

    Morozov, I V; Norman, G E; Valuev, A A; Valuev, I A

    2003-01-01

    Various aspects of the collective behaviour of non-equilibrium nonideal plasmas are studied. The relaxation of kinetic energy to the equilibrium state is simulated by the molecular dynamics (MD) method for two-component non-degenerate strongly non-equilibrium plasmas. The initial non-exponential stage, its duration and the subsequent exponential stage of the relaxation process are studied for a wide range of ion charge, nonideality parameter and ion mass. A simulation model of the nonideal plasma excited by an electron beam is proposed. An approach is developed to calculate the dynamic structure factor in non-stationary conditions. Instability increment is obtained from MD simulations

  10. Short Communications Sand moisture as a factor determining depth ...

    African Journals Online (AJOL)

    1993-11-05

    Nov 5, 1993 ... The depths to which the animals burrow are, at least partly. determined by the moisture gradient in the sand. They are, however, incapable of burrowing into totally dry sand. Animals alter their position in the sand in response to changes in moisture content so as to ensure exposure to suitable conditions.

  11. Determinant Factors of Physical Fitness in European Children

    DEFF Research Database (Denmark)

    Zaqout, Mahmoud; Vyncke, Krishna; Moreno, Luis A.

    2016-01-01

    Objectives: This study was designed to explore the determinants of physical fitness in European children aged 6–11 years, cross-sectionally and longitudinally.Methods: There were sufficient data on 4903 children (50.6 % girls) on measured physical fitness (cardio-respiratory, muscular strength, f...

  12. Topography measurements for determining the decay factors in surface replication

    International Nuclear Information System (INIS)

    Song, J; Zheng, A; Vorburger, T V; Rubert, P

    2008-01-01

    The electro-forming technique is used at National Institute of Standards and Technology (NIST) for the production of standard reference material (SRM) 2461 standard casings to support nationwide ballistics measurement traceability and measurement quality control in the US. In order to ensure that the SRM casings are produced with virtually the same surface topography, it is necessary to test the decay factors of the replication process. Twenty-six replica casings are replicated from the same master casing for the decay factor tests. The NIST topography measurement system is used for measurements and correlations of surface topography. The topography decays are quantified by the cross-correlation function maximum CCF max . Based on the test, it is expected that 256 SRM casings can be replicated from the same master with CCF max values higher than 95%

  13. Factors that Determine Child Behavior during Dental Treatment

    Directory of Open Access Journals (Sweden)

    Bajrić Elmedin

    2016-07-01

    Full Text Available In this review paper we wanted to summarize all the aspects which could affect the behavior of the child patients in the dental office. At the beginning, the factors that are related to the child patients are mentioned. Various segments of child psychological, cognitive, physiological and other kinds of development are discussed. Also, the reasons for dental fear and anxiety (DFA and dental behavior problems (DBP were analyzed, and how the child dental patients could cope with them. Finally, types of patients according to their behavior in the dental office were discussed. Furthermore, the influences of child patients’ parents were studied, including parenting styles, as well as factors related to dentist, dental team and the dental office. Finally, critical evaluation of administration of assets to measure the presence of DFA and DBP is provided. Every part of the text was corroborated by the results from our own and other authors’ recent bibliography data.

  14. NEW DETERMINANT FACTORS OF CHANGE MANAGEMENT IN THE HOSPITALITY INDUSTRY

    Directory of Open Access Journals (Sweden)

    Eugenia ALECU

    2013-12-01

    Full Text Available The factors that we took into account the following important elements: for goods and capital (brand promotion, reliable predictions against risk factors, knowledge capital, intangible values for hotels, for health and safety (the easily with which diseases can cross oceans and borders and multiplying rows of old and new infections, some impossible to treat, strict control of food and non-food products entering in the hotel, for new management (planning education and training process in hospitality industry, demographic problem, New trends in the workplace. One of the most dramatic changes in this industry is the way to sold products and services for public hotels. New technology, development of hospitality industry and social problems are very important, also in this process of change management to hotels.

  15. Gaussian random bridges and a geometric model for information equilibrium

    Science.gov (United States)

    Mengütürk, Levent Ali

    2018-03-01

    The paper introduces a class of conditioned stochastic processes that we call Gaussian random bridges (GRBs) and proves some of their properties. Due to the anticipative representation of any GRB as the sum of a random variable and a Gaussian (T , 0) -bridge, GRBs can model noisy information processes in partially observed systems. In this spirit, we propose an asset pricing model with respect to what we call information equilibrium in a market with multiple sources of information. The idea is to work on a topological manifold endowed with a metric that enables us to systematically determine an equilibrium point of a stochastic system that can be represented by multiple points on that manifold at each fixed time. In doing so, we formulate GRB-based information diversity over a Riemannian manifold and show that it is pinned to zero over the boundary determined by Dirac measures. We then define an influence factor that controls the dominance of an information source in determining the best estimate of a signal in the L2-sense. When there are two sources, this allows us to construct information equilibrium as a functional of a geodesic-valued stochastic process, which is driven by an equilibrium convergence rate representing the signal-to-noise ratio. This leads us to derive price dynamics under what can be considered as an equilibrium probability measure. We also provide a semimartingale representation of Markovian GRBs associated with Gaussian martingales and a non-anticipative representation of fractional Brownian random bridges that can incorporate degrees of information coupling in a given system via the Hurst exponent.

  16. Determining factors of women's careers in management: A typology proposal

    Directory of Open Access Journals (Sweden)

    Cristina Cachón

    2018-04-01

    Originality/value: This paper highlights the identification of the typologies that are necessary for the development of theories and research in the social sciences. It is important to categorize and describe factor classifications in order to understand them better, so as to be able to extrapolate a common theory for other research and to propose solutions in the business environment that allow breaking with the glass ceiling in senior management positions.

  17. Determination of constants of factorized pairing force from conservation laws

    International Nuclear Information System (INIS)

    Voronkov, Yu.P.; Mikhajlov, V.M.

    1975-01-01

    The constants of a factorized interaction in the particle-particle channel are evaluated on the basis of average field parameters and Cooper pairing. The relations between the constants of multipole particle-particle forces are derived for the spherical nuclei. The constants of the quadrupole pairing are obtained for deformed nuclei from the angular momentum conservation law. The calculated constants are compared with empiricalones

  18. Factors determining pochard nest predation along a wetland gradient

    Czech Academy of Sciences Publication Activity Database

    Albrecht, Tomáš; Hořák, D.; Kreisinger, J.; Weidinger, K.; Klvaňa, P.; Michot, T. C.

    2006-01-01

    Roč. 70, č. 3 (2006), s. 784-791 ISSN 0022-541X Institutional research plan: CEZ:AV0Z60930519 Keywords : common pochard * artificial nests * edge effect Subject RIV: EG - Zoology Impact factor: 1.538, year: 2006 http://www.wildlifejournals.org/archive/0022-541X/70/3/pdf/i0022-541X-70-3-784.pdf

  19. Factors determining the viability of radiation processing in developing countries

    Science.gov (United States)

    van der Linde, HJ; Basson, RA

    In the fifteen years since the introduction of radiation processing to South Africa, four commercial irradiation facilities have been established. These are involved in the processing of a large variety of products, from syringes and prostheses to strawberries and sugar yeast. Three of the facilities are devoted mainly to food irradiation and several thousand tonnes are now processed annually. During this period it was repeatedly experienced that the successful introduction of radiation processing in general, and food radurization in particular, on a commercial scale was critically dependent on the following factors: acceptance by the producer, industry and consumer; initial capital expenditure; running costs and overheads in general; and continous throughput. All of these factors contribute to the processing cost which is the ultimate factor in determing the value/price ratio for the potential entrepreneur and customer of this new technology. After a market survey had identified the need for a new food irradiation facility to cope with the growing interest in commercial food radurization in the Western Cape, the above-mentioned factors were of cardinal importance in the design and manufacture of a new irradiator. The resulting batch-pallet facility which was commisioned in August 1986, is rather inefficient as far as energy utilization is concerned but this shortcoming is compensated for by its low cost, versatility and low hold-up. Although the facility has limitations as far as the processing of really large volumes of produce is concerned, it is particularly suitable not only for developing countries, but for developed countries in the introductory phase of commercial food radurization.

  20. Analysis of transfer reactions: determination of spectroscopic factors

    Energy Technology Data Exchange (ETDEWEB)

    Keeley, N. [CEA Saclay, Dept. d' Astrophysique, de Physique des Particules de Physique Nucleaire et de l' Instrumentation Associee (DSM/DAPNIA/SPhN), 91- Gif sur Yvette (France); The Andrzej So an Institute for Nuclear Studies, Dept. of Nuclear Reactions, Warsaw (Poland)

    2007-07-01

    An overview of the most popular models used for the analysis of direct reaction data is given, concentrating on practical aspects. The 4 following models (in order of increasing sophistication): the distorted wave born approximation (DWBA), the adiabatic model, the coupled channels born approximation, and the coupled reaction channels are briefly described. As a concrete example, the C{sup 12}(d,p)C{sup 13} reaction at an incident deuteron energy of 30 MeV is analysed with progressively more physically sophisticated models. The effect of the choice of the reaction model on the spectroscopic information extracted from the data is investigated and other sources of uncertainty in the derived spectroscopic factors are discussed. We have showed that the choice of the reaction model can significantly influence the nuclear structure information, particularly the spectroscopic factors or amplitudes but occasionally also the spin-parity, that we wish to extract from direct reaction data. We have also demonstrated that the DWBA can fail to give a satisfactory description of transfer data but when the tenets of the theory are fulfilled DWBA can work very well and will yield the same results as most sophisticated models. The use of global rather than fitted optical potentials can also lead to important differences in the extracted spectroscopic factors.

  1. Evaluation of scission and crosslinking yields in γ-irradiated poly(acrylic acid) and poly(methacrylic acid) from weight- and Ζ-average molecular weights determined by sedimentation equilibrium

    International Nuclear Information System (INIS)

    Hill, D.J.T.; O'Donnell, J.H.; Winzor, C.L.; Winzor, D.J.

    1990-01-01

    Weight- and Ζ-average molecular weights, M-bar W (D) and M-bar Ζ (D), of poly(methacrylic acid) (PMMA) and poly(acrylic acid) (PAA) have been determined by sedimentation equilibrium in the ultracentrifuge after various doses D of γ-radiation in vacuum. Relationships between [M i (0)/M i (D)-1]/D and D (i=w or Ζ), derived recently by O'Donnell and coworkers, have been used to determine radiation chemical yields for scission and crosslinking of G(S)=6.0, G(X)=0 for PMAA and G(S)=0, G(X)=0.44 for PAA. Allowance was necessary for the effects of COOH decomposition on the average values of the molecular weight and partial specific volume for irradiated PAA. (author)

  2. Determination of the growth restriction factor and grain size for aluminum alloys by a quasi-binary equivalent method

    International Nuclear Information System (INIS)

    Mitrašinović, A.M.; Robles Hernández, F.C.

    2012-01-01

    Highlights: ► A new method to determine the growth restricting factor. (Q) is proposed ► The proposed method is highly accurate (R 2 = 0.99) and simple. ► A major novelty of this method is the determination of Q for non-dilute samples. ► The method proposed herein is based on quasi-binary phase diagrams and composition. ► This method can be easily implemented industrially or as a research tool. - Abstract: In the present research paper is suggested a new methodology to determine the growth restricting factor (Q) and grain size (GS) for various Al-alloys. The present method combines a thermodynamical component based on the liquidus behavior of each alloying element that is later incorporated into the well known growth restricting models for multi-component alloys. This approach that can be used to determine Q and/or GS based on the chemical composition and the slope of the liquidus temperature of any Al-alloy solidified in close to equilibrium conditions. This method can be modified further in order to assess the effect of cooling rate or thermomechanical processing on growth restricting factor and grain size. In the present paper is proposed a highly accurate (R 2 = 0.99) and validated model for Al–Si alloys, but it can be modified for any other Al–X alloying system. The present method can be used for alloys with relatively high solute content and due to the use of the thermodynamics of liquidus this system considers the poisoning effects of single and multi-component alloying elements.

  3. Risk factors affecting injury severity determined by the MAIS score.

    Science.gov (United States)

    Ferreira, Sara; Amorim, Marco; Couto, Antonio

    2017-07-04

    Traffic crashes result in a loss of life but also impact the quality of life and productivity of crash survivors. Given the importance of traffic crash outcomes, the issue has received attention from researchers and practitioners as well as government institutions, such as the European Commission (EC). Thus, to obtain detailed information on the injury type and severity of crash victims, hospital data have been proposed for use alongside police crash records. A new injury severity classification based on hospital data, called the maximum abbreviated injury scale (MAIS), was developed and recently adopted by the EC. This study provides an in-depth analysis of the factors that affect injury severity as classified by the MAIS score. In this study, the MAIS score was derived from the International Classification of Diseases. The European Union adopted an MAIS score equal to or greater than 3 as the definition for a serious traffic crash injury. Gains are expected from using both police and hospital data because the injury severities of the victims are detailed by medical staff and the characteristics of the crash and the site of its occurrence are also provided. The data were obtained by linking police and hospital data sets from the Porto metropolitan area of Portugal over a 6-year period (2006-2011). A mixed logit model was used to understand the factors that contribute to the injury severity of traffic victims and to explore the impact of these factors on injury severity. A random parameter approach offers methodological flexibility to capture individual-specific heterogeneity. Additionally, to understand the importance of using a reliable injury severity scale, we compared MAIS with length of hospital stay (LHS), a classification used by several countries, including Portugal, to officially report injury severity. To do so, the same statistical technique was applied using the same variables to analyze their impact on the injury severity classified according to LHS

  4. FACTORS DETERMINING THE INVESTMENT ATTRACTIVENESS OF THE REGION

    Directory of Open Access Journals (Sweden)

    O. I. Avtsinov

    2014-01-01

    Full Text Available Summary.In the article we can see relevance of the research aimed at creating a favorable investment climate in the country and its regions, as a necessary condition for solving the problems of modernization of industrial production, the introduction of scientific and technological progress in all spheres of public life, the implementation of large-scale social and productive programs. In the study we justify the theoretical principles and reveal the essence of the relationship concepts: investment climate, investment attractiveness and investment activity. It is proved that the investment attractiveness should be considered as a sign of factorial and important component of the investment climate in the region, and investment activity as a sign score. In the study we can see a wide range of factors shaping favorable conditions for investment activities. The author focuses on the importance of non-traditional factors shaping the investment attractiveness of such as reducing the time to connect to power grid, information communication, improvement of tax reporting procedures, clarity of customs work, the introduction of regulations for obtaining permits for construction of facilities and reducing the number of required documents. This article analyzes of the indices and the key factors of investment attractiveness of the Voronezh region, which attract investment, exceeding the national average. The main ones are the development of new industrial parks with good transport, engineering, business infrastructure. Investors in the region have favorable conditions to carry on business on the prepared sites with painted communications, junctions, allowing them to reduce production costs, while correspondingly increasing the investment attractiveness of the area. Success of the attracting investment in the Voronezh region is largely due to the introduction standard of the executive bodies of state power, including 15 documents designed to make the

  5. DETERMINANT EROSION FACTORS FOR PENSION ROMANIAN SYSTEM - A STATISTICAL APPROACH

    Directory of Open Access Journals (Sweden)

    Ana-Gabriela BABUCEA

    2010-09-01

    Full Text Available The demographical evolutions of the last 20 years, the changes in the Romanian economy and society influenced one special category which is the retired people. As inactive population, retired people represents an important category, their numbers being rather big in comparison with the employed population, practical the contributors at the pensions fund. In 2010, the stat has serious problems with paying pensions. The evolution of this category of people is the subject of this paper. We try to identify the factors that had negative influence upon the pension Romanian system. The reference years that we considered are 1990-2009.

  6. The IP vs. VDE competition as a key factor determining the stability of the MgBX 5 (X = F, Cl) compounds

    Science.gov (United States)

    Sikorska, Celina; Skurski, Piotr

    2010-11-01

    The explanation of the MgBX 5 (X = F, Cl) systems existence and stability is provided on the basis of theoretical considerations supported by ab initio calculations. The equilibrium structures and most probable fragmentation processes of 26 (including isomers) MgBX 5 molecules and six OBX 5 compounds (for comparison) were examined and discussed. The competition between the ionization potential (IP) of the MgX subunit and the electron binding energy (VDE) of the BX 4 fragment was found to be the key factor determining the ability to form a stable compound of MgBX 5 type.

  7. Are interest groups different in the factors determining landscape preferences?

    Directory of Open Access Journals (Sweden)

    Maria Bacher

    2016-02-01

    Full Text Available In the last decades, rural landscape in Europe has evolved from an agricultural by-product to an important public good. This development creates not only new challenges to farming practices, it also makes participation and public involvement an indispensable tool for sustainable landscape planning. This is especially true for many European mountain regions, where tourism represents an important source of income and conflicts between locals’ and tourists’ interests should be avoided. In our study, we analyze whether discrepancies in the perception of the Alpine landscape can be located between locals and tourists and, if these differences exist, in which aspects these two groups are differing. A model employing three general factors able to describe landscape preferences regardless of the personal background is suggested and validated by confirmatory factor analysis. Our major finding shows that an attractive landscape for tourists does not have to be contradictory to a landscape that supports a high living quality for locals. Compromises in landscape planning between locals’ and tourists’ requirements seem often not to be necessary as they, generally, do not differ in the way they experience and assess the landscape.

  8. Social Factors Determine the Emergency Medical Admission Workload

    Directory of Open Access Journals (Sweden)

    Seán Cournane

    2017-06-01

    Full Text Available We related social factors with the annual rate of emergency medical admissions using census small area statistics. All emergency medical admissions (70,543 episodes in 33,343 patients within the catchment area of St. James’s Hospital, Dublin, were examined between 2002 and 2016. Deprivation Index, Single-Parent status, Educational level and Unemployment rates were regressed against admission rates. High deprivation areas had an approximately fourfold (Incidence Rate Ratio (IRR 4.0 (3.96, 4.12 increase in annual admission rate incidence/1000 population from Quintile 1(Q1, from 9.2/1000 (95% Confidence Interval (CI: 9.0, 9.4 to Q5 37.3 (37.0, 37.5. Single-Parent families comprised 40.6% of households (95% CI: 32.4, 49.7; small areas with more Single Parents had a higher admission rate-IRR (Q1 vs. for Q5 of 2.92 (95% CI: 2.83, 3.01. The admission incidence rate was higher for Single-Parent status (IRR 1.50 (95% CI: 1.46, 1.52 where the educational completion level was limited to primary level (Incidence Rate Ratio 1.45 (95% CI: 1.43, 1.47. Small areas with higher educational quintiles predicted lower Admission Rates (IRR 0.85 (95% CI: 0.84, 0.86. Social factors strongly predict the annual incidence rate of emergency medical admissions.

  9. Factors that determine the evolution of high-growth businesses

    Directory of Open Access Journals (Sweden)

    Oriol Amat

    2013-09-01

    Full Text Available Objective: The study herein discusses research aimed at elucidating the factors that contribute to a business’ ability to maintain high growth. Design/Methodology/Perspective: The database from the Iberian Balance Sheet Analysis System (SABI, from its initials in Spanish was used to identify 250 industrial Catalonian businesses with high growth during 2004-2007. These companies participated in a survey on strategies and management practices; in 2013, they were re-analyzed to investigate the factors that contributed to continued growth for certain companies. Contributions: Through diverse statistical techniques, business policies related to quality, innovation, internationalization and finance were shown to influence business growth and sustainability over time. Limitations of the Research: This study focuses on industrial businesses at least ten years old in Catalonia; thus, the conclusions may differ in other geographic locations and economic sectors, as well as for smaller businesses. Practical Implications: Because growth is a measure of business success, identifying variables that contribute to high growth and its sustainability is helpful for businesses that seek to adopt effective policies. Social Implications: Generating employment is one of the primary contributions by high-growth businesses. For years with high unemployment, authorities may be interested in corporate policies that strengthen high-growth businesses. Originality/Added Value: High-growth businesses have been studied throughout the world, but this is the first study to investigate the evolution of businesses after a high-growth phase.

  10. Determining Factors of Deposit Level of Islamic Bank in Indonesia

    Directory of Open Access Journals (Sweden)

    Sofyan Baehaqie

    2017-05-01

    Full Text Available One Way to maintain the stability of banking industry is by applying the deposit insurance scheme. The application of the deposit insurance scheme has an impact by increasing the level of bank deposits. The objectives of the research are to identify the factors affecting the level of deposits of Islamic banks in Indonesia and managerial implications regarding to the functions of Indonesia Deposit Insurance Corporation (LPS. The technique used is the panel data regression with fixed effect model using the data from the 11 Islamic banks for the period of 2011 -2015. The results show that the factors affecting the level of deposits of the Islamic banks in Indonesia significantly and positively include the size of banks and their non-performing financing (NPF; however, they influence the capital negatively. Based on these results, LPS is required to build or sharpen the surveillance systems as part of its early detection by doing the mapping based on the size and to monitor the bank capital structure and bank finance portfolio structure.DOI: 10.15408/aiq.v9i2.5156

  11. 19 CFR 103.23 - Factors in determining whether to disclose information pursuant to a demand.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 1 2010-04-01 2010-04-01 false Factors in determining whether to disclose... Disclosure in Federal, State, Local, and Foreign Proceedings § 103.23 Factors in determining whether to... those demands with respect to which any of the following factors exist: (1) Disclosure would violate a...

  12. The animal model determines the results of Aeromonas virulence factors

    Directory of Open Access Journals (Sweden)

    Alejandro Romero

    2016-10-01

    Full Text Available The selection of an experimental animal model is of great importance in the study of bacterial virulence factors. Here, a bath infection of zebrafish larvae is proposed as an alternative model to study the virulence factors of A. hydrophila. Intraperitoneal infections in mice and trout were compared with bath infections in zebrafish larvae using specific mutants. The great advantage of this model is that bath immersion mimics the natural route of infection, and injury to the tail also provides a natural portal of entry for the bacteria. The implication of T3SS in the virulence of A. hydrophila was analysed using the AH-1::aopB mutant. This mutant was less virulent than the wild-type strain when inoculated into zebrafish larvae, as described in other vertebrates. However, the zebrafish model exhibited slight differences in mortality kinetics only observed using invertebrate models. Infections using the mutant AH-1∆vapA lacking the gene coding for the surface S-layer suggested that this protein was not totally necessary to the bacteria once it was inside the host, but it contributed to the inflammatory response. Only when healthy zebrafish larvae were infected did the mutant produce less mortality than the wild type. Variations between models were evidenced using the AH-1∆rmlB, which lacks the O-antigen lipopolysaccharide (LPS, and the AH-1∆wahD, which lacks the O-antigen LPS and part of the LPS outer-core. Both mutants showed decreased mortality in all of the animal models, but the differences between them were only observed in injured zebrafish larvae, suggesting that residues from the LPS outer core must be important for virulence. The greatest differences were observed using the AH-1ΔFlaB-J (lacking polar flagella and unable to swim and the AH-1::motX (non-motile but producing flagella. They were as pathogenic as the wild-type strain when injected into mice and trout, but no mortalities were registered in zebrafish larvae. This study

  13. A biological radioimmunological microassay to determine hypophysiotropic factors

    International Nuclear Information System (INIS)

    Sand, T.

    1980-01-01

    The thesis presented there describes a combined biological-radioimmunological assay for hypophysiotropic substances. The secretion reaction of adenohypophysial rat cells cultured by a long-term monolayer technique is used as a measure of hypophysiotropic activity. For hypophysial hormones released into the culture medium are then determined directly with the aid of specific radio immunoassay. This method can also be used for substances not yet characterized chemically or for tissue extracts, as shown here using hypothalamus stalk median eminance extract as example. The method is technically quite simple and economical. At the same time the technique is exact and reliable and offers, for TRH and LHRH determination, a degree of sensitivity in the pg range similar to that obtained by radioimmunological methods. The sensitivity towards CRH activity exceeds that obtained by other methods to date. From a morphological viewpoint and from comparisons of spontaneous secretion behaviour (or stimulation reactions following TRH, LHRH, dopamine and vasopressin application) with in-vivo findings it was shown that the long-term cell cultures were intact and that, overall, the culture model used closely approximates in its functional behaviour the physiological situation. (orig./MG) [de

  14. The Factors that Determine the Minimum Speed of an Airplane

    Science.gov (United States)

    Norton, F H

    1921-01-01

    The author argues that because of a general misunderstanding of the principles of flight at low speed, there are a large number of airplanes that could be made to fly several miles per hour slower than at present by making slight modifications. In order to show how greatly the wing section affects the minimum speed, curves are plotted against various loadings. The disposition of wings on the airplane slightly affects the lift coefficient, and a few such cases are discussed. Another factor that has an effect on minimum speed is the extra lift exerted by the slip stream on the wings. Also discussed are procedures to be followed by the pilot, especially with regard to stick movements during low speed flight. Also covered are stalling, yaw, rolling moments, lateral control, and the effectiveness of ailerons and rudders.

  15. Determining and predictive factors for the tumor radiosensitivity

    International Nuclear Information System (INIS)

    Hennequin, Ch.; Quero, L.; Hennequin, Ch.; Quero, L.; Favaudon, V.

    2008-01-01

    Many predictive factors of tumor radiosensitivity have been described. Number of clonogenic cells, proliferation rate, hypoxia and intrinsic radiosensitivity are usually considered as the main parameters of tumor control. Intrinsic radiosensitivity is correlated in a first approach to the ability of the cell to detect and repair DNA damages, and so integrity of the different pathways involved in this function: P.A.R.P.-1, X.R.C.C.1, A.T.M., p 53, M.R.N. complex or B.R.C.A.1. Genetic polymorphisms of some of these genes, found in normal lymphocytes, have been correlated to late toxicity of normal tissues. But, in tumors, because of the difficulty to obtain samplings and heterogeneity, accurate molecular analysis is not possible in many cases, and no valuable test of radiosensitivity exist at this moment. For example, T.P. 53 gene has been evaluated in many studies and results regarding its potential as a predictive factor of tumor sensitivity are conflicting. Surviving fraction at 2 Gy (S.F.2) allowed a global evaluation of sensitivity, but the obtention of this parameter often takes a long time and failed in 20 to 40%. Evaluation of double-strand break repair capacity by immuno chemistry quantification of phosphorylated forms of A.T.M., H.2 A.X. or M.R.E.11 is an interesting topic. However, discovery of tumor stem cells in a number of epithelial tumors could revolutionize the understanding of radiosensitivity. Combination of genomic and functional techniques are probably essential to better predict this parameter. (authors)

  16. Determination of dose factors for external gamma radiation in dwellings

    International Nuclear Information System (INIS)

    Maduar, M.F.; Hiromoto, G.

    2000-01-01

    A significant contribution to the global population exposure to ionizing radiation arises from natural sources, especially from radionuclides present in terrestrial crust. Human activities can eventually increase that exposure to significant levels, from the point of view of radiological protection. The presence of natural radionuclides in building materials may lead to an increment of both external and internal radiation exposure of the population. External exposure in dwellings arises from gamma-emitter radionuclides existing in the walls, floor and ceiling of their rooms. Mathematical models can be used to predict external dose rates inside the room, known the radionuclide concentration activities in dwelling constituents. This paper presents a methodology for theoretical evaluation of external gamma doses due to radionuclides present in the walls of an hypothetical standard room. The room is modeled as three pairs of rectangular sheets with finite thickness. Assessment of doses was performed through the application of photon transport model, taking in account self-absorption and radiation buildup. As the external dose due to a particular radionuclide is proportional to its activity concentration, results are presented as dose factors, defined as a ratio of absorbed dose (nGy.h -1 ) to the activity concentration (Bq.kg -1 ), for each radionuclide. The radionuclides were assumed to be uniformly distributed in the building materials. Calculations were performed for concrete walls and results are presented for 40 K, 226 Ra, and 232 Th, taking in account, for dose calculations, all gamma emitters from 226 Ra and 232 Th decay chains. Sensitivity of the model was estimated by varying four of its input parameters within a reasonable range of applicability, while leaving all other parameters at fixed selected values. The parameters studied and respective ranges of variation were: for thickness, 5 to 60 cm; for density, 0.5 to 4 g.cm -3 ; for the room length, 1.5 to 10 m

  17. The equilibrium price range of oil: economics, politics and uncertainty in the formation of oil prices

    International Nuclear Information System (INIS)

    Giraud, P.-N.

    1995-01-01

    This paper attempts to clarify the articulation between economic and political factors in the formation of petroleum prices. The essential point is that when factors control significant low cost reserves and will not or cannot adopt behaviour of a 'substantial economic rationality' then the economic analysis does not allow a unique dynamic equilibrium price to be determined. However, it does permit definition of an equilibrium price range within which political preferences may be expressed. Finally, the paper draws some conclusions on what could be discussed within the scope of a new oil producer-consumer dialogue. (author)

  18. Equilibrium shoreface profiles

    DEFF Research Database (Denmark)

    Aagaard, Troels; Hughes, Michael G

    2017-01-01

    Large-scale coastal behaviour models use the shoreface profile of equilibrium as a fundamental morphological unit that is translated in space to simulate coastal response to, for example, sea level oscillations and variability in sediment supply. Despite a longstanding focus on the shoreface...... profile and its relevance to predicting coastal response to changing environmental conditions, the processes and dynamics involved in shoreface equilibrium are still not fully understood. Here, we apply a process-based empirical sediment transport model, combined with morphodynamic principles to provide......; there is no tuning or calibration and computation times are short. It is therefore easily implemented with repeated iterations to manage uncertainty....

  19. [Volunteering in psychiatry: determining factors of attitude and actual commitment].

    Science.gov (United States)

    Lauber, C; Nordt, C; Falcato, L; Rössler, W

    2000-10-01

    To assess public attitude, actual working commitment and the respective influence of demographic, psychological and sociological variables on voluntary help in psychiatry. Multiple logistic regression analysis of the results of a representative population survey in Switzerland. Public attitude is mostly positive, but the respective working commitment is small. Attitude depends on gender, psychological factors (social distance, stereotypes), and on attitude to community psychiatry. For the working commitment, clearly distinct predictors are found: age, emotions, participation, and perceived discrimination to the mentally ill. For both attitude and commitment, having a social profession and interest in mass media are predictors. Internationally compared, Switzerland has a positive attitude and a big commitment in lay helping in psychiatry. But attitude is different from actual commitment. Lay helpers' work must be limited to realizable tasks and they need professional recruitment, instruction, and supervision otherwise they tend to be over-burden. The unused potential of voluntary helpers has to be opened specifically, e.g. by involving mass media and opinion-makers.

  20. Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

    International Nuclear Information System (INIS)

    Teh, B T; Ho, C S; Chau, L W; Matsuoka, Y; Gomi, K

    2014-01-01

    Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis

  1. Determinant factors of industrial symbiosis: greening Pasir Gudang industrial park

    Science.gov (United States)

    Teh, B. T.; Ho, C. S.; Matsuoka, Y.; Chau, L. W.; Gomi, K.

    2014-02-01

    Green industry has been identified as an important element in attaining greater sustainability. It calls for harmonizing robust economic growth with environment protection. Industries, particularly in developing and transitional nations such as Malaysia, are in need of a reform. Many experts and international organizations suggest the concept of industrial symbiosis. Mainly, there are successful cases of industrial symbiosis practices around the world. However, there are numerous cases of failure too. As industrial symbiosis is an emerging new approach, with a short history of two decades, a lot of researches are generally focused on narrow context and technical details. There is a lack of concerted efforts to look into the drivers and barriers of industrial symbiosis across different cases. This paper aims to examine the factors influencing the development of industrial symbiosis from various countries to supports such networks to evolve in Pasir Gudang. The findings show institution, law and regulation, finance, awareness and capacity building, technology, research and development, information, collaboration, market, geography proximity, environmental issues and industry structure affect the formation of industrial symbiosis.

  2. Is skin penetration a determining factor in skin sensitization ...

    Science.gov (United States)

    Summary:Background. It is widely accepted that substances that cannot penetrate through the skin will not be sensitisers. Thresholds based on relevant physicochemical parameters such as a LogKow > 1 and a MW 1 is a true requirement for sensitisation.Methods. A large dataset of substances that had been evaluated for their skin sensitisation potential, together with measured LogKow values was compiled from the REACH database. The incidence of skin sensitisers relative to non-skin sensitisers below and above the LogKow = 1 threshold was evaluated. Results. 1482 substances with associated skin sensitisation outcomes and measured LogKow values were identified. 305 substances had a measured LogKow self-evident truth borne out from the widespread misconception that the ability to efficiently penetrate the stratum corneum is a key determinant of skin sensitisation potential and potency. Using the REACH data extracted to test out the validity of common assumptions in the skin sensitization AOP. Builds on trying to develop a proof of concept IATA

  3. Some factors affecting the accuracy of uranium content determined by DNC measurement

    International Nuclear Information System (INIS)

    Song Quanxun

    1988-01-01

    Some factors affecting the accuracy of uranium contents determined by delayed neutron counting and methods solving these problems are described. One of the factors is deterioration of the BF 3 proportional counters. This problem is discussed in more detail

  4. Factors that Determine Depth Perception of Trapezoids, Windsurfers, Runways

    Directory of Open Access Journals (Sweden)

    Chia-Huei eTseng

    2015-04-01

    Full Text Available We report here a windsurfer1 illusion, a naturally occurring trapezoidal illusion in which the small endof the sail viewed at a distance appears to be pointed away from the observer even when it is closer.This naturally occurring illusion is so compelling that observers are unaware of their gross perceptualmisinterpretation of the scene. Four laboratory experiment of this kind of trapezoidal illusion investigatedthe joint effects of retinal orientation, head position, relative motion, and the relative direction ofgravity on automatic depth perception. Observers viewed two adjacent white trapezoids outlined on ablack background rotating back and forth +/- 20 deg on a vertical axis much like the sails of two adjacentwindsurfers. Observers reported which side of the trapezoids (long or short appeared to becloser to them (i.e., in front. The longer edge of the trapezoid was reported in front 76+/-2% of trials(windsurfer effect whether it was on the left or on the right. When the display was rotated 90 deg toproduce a runway configuration, there was a striking asymmetry: the long edge was perceived to bein front 97% when it was on the bottom but only 43% when it was on top (runway effect. The runwayeffect persisted when the head was tilted 90 deg or when displays on the ceiling were viewedfrom the floor. 95% of the variance of the variance in the strikingly different 3D perceptions producedby the same 2D trapezoid image was quantitatively explained by a model that assumes there are justthree additive bias factors that account for perceiving an edge as closer: Implicit linear perspective,lower position on the retina (based on an automatic assumption of viewing from above, and beinglower in world coordinates.

  5. The Determining Factors of Entrepreneurial Activity in Broiler Farms

    Directory of Open Access Journals (Sweden)

    Burhanuddin

    2013-12-01

    Full Text Available Indonesia still requires approximately 4 million entrepreneurs to become a developed country. This research aimed at identifying and analyzing the factors forming the broiler farm entrepreneurial activities that contribute on generating new entrepreneurs in Indonesia. Primary data were collected through questionnaire and analyzed by Structural Equation Modeling (SEM. Independent latent variables were innovations (IN, productions (DP, competitiveness (DS, risks (PR, labors (TK, and policies (KP, and then entrepreneurial activities (AK as dependent latent variable. The results showed that the model was built (MODEL1 as measurement model and MODEL2 as structural model had goodness fit and good reliability measurement variables (CR≥0.70, VE≥0.50. Innovation was reflected by the level of willingness to innovate (λ=0.63 and level of technology (λ=0.62. Production was reflected by production efficiency (λ=0.62 and cost control (λ=0.43. Competitiveness was reflected by the internet (λ=0.56, the cost of starting (λ=0.55, and new business formation (λ=0.58. Labor was reflected by the training and development (λ=0.57, and motivation (λ=0.42. Policies was reflected by access to land (λ=0.56, technical assistance (λ=0.60, research and technology (λ=0.66, and copyright protection (λ=0.64. The entrepreneurial activity of broiler farms were formed by innovation (γ=0.91, competitiveness (γ=0.94, and policies (γ=0.98. Broiler farms contributed positively to generate new entrepreneurs. Production and information technology development program, facilitation of the creation of new ventures program, business expansion program, and a program of strengthening intellectual property rights on broiler farms should be a priority of the Indonesian government programs in the future.

  6. Physical and biological factors determining the effective proton range

    International Nuclear Information System (INIS)

    Grün, Rebecca; Friedrich, Thomas; Krämer, Michael; Scholz, Michael; Zink, Klemens; Durante, Marco; Engenhart-Cabillic, Rita

    2013-01-01

    Purpose: Proton radiotherapy is rapidly becoming a standard treatment option for cancer. However, even though experimental data show an increase of the relative biological effectiveness (RBE) with depth, particularly at the distal end of the treatment field, a generic RBE of 1.1 is currently used in proton radiotherapy. This discrepancy might affect the effective penetration depth of the proton beam and thus the dose to the surrounding tissue and organs at risk. The purpose of this study was thus to analyze the impact of a tissue and dose dependent RBE of protons on the effective range of the proton beam in comparison to the range based on a generic RBE of 1.1.Methods: Factors influencing the biologically effective proton range were systematically analyzed by means of treatment planning studies using the Local Effect Model (LEM IV) and the treatment planning software TRiP98. Special emphasis was put on the comparison of passive and active range modulation techniques.Results: Beam energy, tissue type, and dose level significantly affected the biological extension of the treatment field at the distal edge. Up to 4 mm increased penetration depth as compared to the depth based on a constant RBE of 1.1. The extension of the biologically effective range strongly depends on the initial proton energy used for the most distal layer of the field and correlates with the width of the distal penumbra. Thus, the range extension, in general, was more pronounced for passive as compared to active range modulation systems, whereas the maximum RBE was higher for active systems.Conclusions: The analysis showed that the physical characteristics of the proton beam in terms of the width of the distal penumbra have a great impact on the RBE gradient and thus also the biologically effective penetration depth of the beam

  7. The Youth Life Style in Tehran and its Determining Factors

    Directory of Open Access Journals (Sweden)

    Bijan Zare

    2013-03-01

    Full Text Available The goal of this research is on the one hand to identify various life styles of the youth living in Tehran and, on the other hand, to study several social, economic and cultural factors affecting the youth life styles. Based on Cookran formula, sample size amounts to 400, and cluster sampling was used as sampling method. Studying existing theories and reviewing empirical studies relevant to the research subject matter, various life styles such as aesthetical-hedonistic, functionalistic, sub-cultural, and passive ones were identified. According to the mean rates of various life styles, the hedonistic one enjoyed the highest rate, amounting to 53% of the sample population, the functionalistic one showed a moderate rate of 46.8 of the sample population, and the lowest rate belonged to the passive life style. Based on the person correlation coefficient, it could be said that there was a positive and meaningful relationship between social capital and various types of life styles. Also, a meaningful relationship of 0.01 existed between cultural capital and various types of life style. Moreover, person correlation coefficient confirms the meaningful and positive relationship between economic capital and functionalistic, hedonistic and passive life styles. Using step by step method in the multi-variable regression shows the economic variables contribution in explaining the life styles variable as to be as 0.31, the social ones as to 0.17, and cultural capital impact as to 0.16. In sum, taking into consideration R2 coefficient, the three mentioned variables explain 19% of the variance of the life style variable.

  8. Determination of kinetic and equilibrium parameters of the batch adsorption of Mn(II), Co(II), Ni(II) and Cu(II) from aqueous solution by black carrot (Daucus carota L.) residues

    International Nuclear Information System (INIS)

    Guezel, Fuat; Yakut, Hakan; Topal, Giray

    2008-01-01

    In this study, the effect of temperature on the adsorption of Mn(II), Ni(II), Co(II) and Cu(II) from aqueous solution by modified carrot residues (MCR) was investigated. The equilibrium contact times of adsorption process for each heavy metals-MCR systems were determined. Kinetic data obtained for each heavy metal by MCR at different temperatures were applied to the Lagergren equation, and adsorption rate constants (k ads ) at these temperatures were determined. These rate constants related to the adsorption of heavy metal by MCR were applied to the Arrhenius equation, and activation energies (E a ) were determined. In addition, the isotherms for adsorption of each heavy metal by MCR at different temperatures were also determined. These isothermal data were applied to linear forms of isotherm equations that they fit the Langmuir adsorption isotherm, and the Langmuir constants (q m and b) were calculated. b constants determined at different temperatures were applied to thermodynamic equations, and thermodynamic parameters such as enthalpy (ΔH), free energy (ΔG), and entropy (ΔS) were calculated and these values show that adsorption of heavy metal on MCR was an endothermic process and process of adsorption was favoured at high temperatures

  9. Comparison of adsorption equilibrium and kinetic models for a case study of pharmaceutical active ingredient adsorption from fermentation broths: parameter determination, simulation, sensitivity analysis and optimization

    Directory of Open Access Journals (Sweden)

    B. Likozar

    2012-09-01

    Full Text Available Mathematical models for a batch process were developed to predict concentration distributions for an active ingredient (vancomycin adsorption on a representative hydrophobic-molecule adsorbent, using differently diluted crude fermentation broth with cells as the feedstock. The kinetic parameters were estimated using the maximization of the coefficient of determination by a heuristic algorithm. The parameters were estimated for each fermentation broth concentration using four concentration distributions at initial vancomycin concentrations of 4.96, 1.17, 2.78, and 5.54 g l−¹. In sequence, the models and their parameters were validated for fermentation broth concentrations of 0, 20, 50, and 100% (v/v by calculating the coefficient of determination for each concentration distribution at the corresponding initial concentration. The applicability of the validated models for process optimization was investigated by using the models as process simulators to optimize the two process efficiencies.

  10. Determination and modeling of binary and ternary solid-liquid phase equilibrium for the systems formed by 3,5-dinitrobenzoic acid, m-nitrobenzoic acid and acetone

    International Nuclear Information System (INIS)

    Li, Xinbao; Du, Cunbin; Zhao, Hongkun

    2017-01-01

    Highlights: • The solubility of 3,5-dinitrobenzoic acid in acetone was determined. • Solubility of m-nitrobenzoic acid + 3,5-dinitrobenzoic acid + acetone was determined. • Three ternary phase diagrams were constructed for the ternary system. • The ternary phase diagrams were calculated by Wilson model and NRTL model. - Abstract: The solubility of 3,5-dinitrobenzoic acid in acetone at the temperatures ranging from (283.15 to 318.15) K and the mutual solubility of the ternary m-nitrobenzoic acid + 3,5-dinitrobenzoic acid + acetone system at (283.15, 298.15 and 313.15) K were determined experimentally by using the isothermal saturation method under atmosphere pressure (101.2 kPa). Three isothermal ternary phase diagrams were constructed according to the measured mutual solubility data. In each ternary phase diagram, there was one co-saturated point, two boundary curves, and three crystalline regions. The modified Apelblat equation, λh equation, NRTL model and Wilson model were used to correlate the solubility of 3,5-dinitrobenzoic acid in acetone; and the NRTL and Wilson models, the mutual solubility for the ternary m-nitrobenzoic acid + 3,5-dinitrobenzoic acid + acetone system. The value of root-mean-square deviation (RMSD) was 8.53 × 10 −4 for the binary system of 3,5-dinitrobenzoic acid + acetone; and the largest value of RMSD was 81.08 × 10 −4 for the ternary system.

  11. QUALITY OF NATIONAL ECONOMIC GROWTH: FACTORS AND DETERMINANTS

    Directory of Open Access Journals (Sweden)

    Nikolaj I. Komkov

    2015-01-01

    Full Text Available The subject / topic: TThe theme of this article is very relevant in the light of changes in the global geo-economic structure and changing the role and place ofRussiain world economic and geopolitical relations. The article deals with the basic aspects of national economic growth, which slowed down in the last three years. The main reason for slowing national economic growth is associated with the depletion of the reserves of the traditional export-oriented development of the Russian economy, as well as problems with sluggish innovative transformation. In this paper, based on a systematic analysis of economic processes and the interpretation of analytical data, addresses the general theoretical and methodological aspects of the quality of economic development, as well as practical guidelines and recommendations related to sustainable national socio-economic development in the context of external constraints.The purpose / objectives: The aim of the article is to analyze the theoretical and methodological aspects of the quality of economic development of the Russian economy, which happened in the face of economic sanctions. Objectives of the article: justify practical directions and recommendations related to sustainable national socio-economic development in the context of external constraints, determine the prospects for the economy of theRussian Federationin the conditions of the introduction of sectoral sanctions by Western countries. Methodology:Methodological basis of this article are the comparative and economic-statistical methods of analysis.The Results: The study revealed that the harsh environment (sanctions, depreciation of the ruble, and others. Require surgical intervention and adjustments not only the current socio-economic plans, but also to take urgent measures to ensure the development prospects. The most important decision is the degree of support advanced scientific and technical programs and the creation of new domestic

  12. Microeconomics : Equilibrium and Efficiency

    NARCIS (Netherlands)

    Ten Raa, T.

    2013-01-01

    Microeconomics: Equilibrium and Efficiency teaches how to apply microeconomic theory in an innovative, intuitive and concise way. Using real-world, empirical examples, this book not only covers the building blocks of the subject, but helps gain a broad understanding of microeconomic theory and

  13. Differential Equation of Equilibrium

    African Journals Online (AJOL)

    user

    ABSTRACT. Analysis of underground circular cylindrical shell is carried out in this work. The forth order differential equation of equilibrium, comparable to that of beam on elastic foundation, was derived from static principles on the assumptions of P. L Pasternak. Laplace transformation was used to solve the governing ...

  14. DETERMINANT FACTORS EFFECTING POVERTY AMONG NEW CONVERTS IN SELANGOR, MALAYSIA

    Directory of Open Access Journals (Sweden)

    Fuadah Johari

    2015-06-01

    Full Text Available The justice in Islam had attracted and opens the hearts of non-muslins to accept Islam. The justice and truthfulness of Islamic teaching attract the human to be part of its through conversion or reconciliation of hearts (Muallaf al-Qulub and it is one of the zakat recipients mentioned in Al-Qur’an. In Selangor, zakat assistance to the new converts begins from the first day they become Muslims. The new Muslim would be immediately helped with MYR 500.00 monthly allowance for five years until they manage to act in accordance with Allah’s orders and to perform worshipping (Mukallaf. This paper identifies the factors of new converts’ poverty in Selangor, Malaysia using a logistic regression method. A set of survey questionnaires has been used in this research and 80 respondents were randomly selected from Selangor Zakat Centre (SZC zakat recipient’s list from the New Converts category for nine districts of Selangor in 2013. We estimate the probability of households with specified characteristics to fall below Malaysia’s official poverty line. Results show that education, size, region, income and amount of zakat received significantly reduces the chance of being poor while gender, age, status were not a significant predictor. Thus, these statistical measures have proven the positive role of zakat in reducing poverty among the new converts. The findings have important policy implications for zakat institution and Malaysian government which has pledged to reduce overall poverty rate to 2.8 percent and eradicates hardcore poverty by 2010 under the Ninth Malaysian Plan. =========================================== Keadilan dalam Islam telah menarik perhatian dan membuka hati non-muslim untuk menerima Islam. Keadilan dan kejujuran dalam ajaran Islam menarik banyak untuk masuk dalam Islam (Muallaf al-Qulub dan mereka menjadi salah satu penerima zakat seperti disebutkan dalam Al Qur'an. Di Selangor, bantuan zakat kepada para muallaf dimulai pada

  15. Comments on equilibrium, transient equilibrium, and secular equilibrium in serial radioactive decay

    International Nuclear Information System (INIS)

    Prince, J.R.

    1979-01-01

    Equations describing serial radioactive decay are reviewed along with published descriptions or transient and secular equilibrium. It is shown that terms describing equilibrium are not used in the same way by various authors. Specific definitions are proposed; they suggest that secular equilibrium is a subset of transient equilibrium

  16. Application of 3H-labelled silation reagents to determine the kinetic and equilibrium constants of the silylation reactions for mass spectrometry of steroid hormones

    International Nuclear Information System (INIS)

    Struckmeyer, H.F.

    1976-01-01

    Using the 3 H-labelled silation agents hexamethyl disilazane, trimethyl chlorosilane, and bis-(trimethylsilyl-) acetamide, the silation rate and efficiency of the silation of hydroxyl-substituted steroids was controlled. To determine the reactivity and specificity, 5d-androstane derivatives with defined keto- and hydroxyl groups were used. It was found that the silation process is best reproducible at room temperature. Steroid hormone silation is quantitative and reproducible with BSA, but less reproducible with HMDS with TMCS additives. The reaction rate increases with increasing amounts of TMCS, but a decomposition of the steroid hormones is observed at the same time. At a reaction temperature of 22 0 C, the experiment proceeds optimally with regard to reaction rate and steroid loss due to decomposition. The silated steroids are stable. (AJ) [de

  17. Role of the Leukemia-Inhibitory Factor Gene Mutations in Infertile Women:The Embryo-Endometrial Cytokine Cross Talk during Implantation-a Delicate Homeostatic Equilibrium

    Czech Academy of Sciences Publication Activity Database

    Králíčková, M.; Šíma, Petr; Rokyta, Z.

    2005-01-01

    Roč. 50, č. 3 (2005), s. 179-186 ISSN 0015-5632 R&D Projects: GA ČR GA301/02/1232; GA ČR GA301/05/0078 Institutional research plan: CEZ:AV0Z50200510 Keywords : leukemia inhibitory factor * interleukin 11 Subject RIV: EE - Microbiology, Virology Impact factor: 0.918, year: 2005

  18. Equilibrium and pre-equilibrium emissions in proton-induced ...

    Indian Academy of Sciences (India)

    necessary for the domain of fission-reactor technology for the calculation of nuclear transmutation ... tions occur in three stages: INC, pre-equilibrium and equilibrium (or compound. 344. Pramana ... In the evaporation phase of the reaction, the.

  19. Problems in equilibrium theory

    CERN Document Server

    Aliprantis, Charalambos D

    1996-01-01

    In studying General Equilibrium Theory the student must master first the theory and then apply it to solve problems. At the graduate level there is no book devoted exclusively to teaching problem solving. This book teaches for the first time the basic methods of proof and problem solving in General Equilibrium Theory. The problems cover the entire spectrum of difficulty; some are routine, some require a good grasp of the material involved, and some are exceptionally challenging. The book presents complete solutions to two hundred problems. In searching for the basic required techniques, the student will find a wealth of new material incorporated into the solutions. The student is challenged to produce solutions which are different from the ones presented in the book.

  20. Equilibrium statistical mechanics

    CERN Document Server

    Jackson, E Atlee

    2000-01-01

    Ideal as an elementary introduction to equilibrium statistical mechanics, this volume covers both classical and quantum methodology for open and closed systems. Introductory chapters familiarize readers with probability and microscopic models of systems, while additional chapters describe the general derivation of the fundamental statistical mechanics relationships. The final chapter contains 16 sections, each dealing with a different application, ordered according to complexity, from classical through degenerate quantum statistical mechanics. Key features include an elementary introduction t

  1. Volatility in Equilibrium

    DEFF Research Database (Denmark)

    Bollerslev, Tim; Sizova, Natalia; Tauchen, George

    Stock market volatility clusters in time, carries a risk premium, is fractionally inte- grated, and exhibits asymmetric leverage effects relative to returns. This paper develops a first internally consistent equilibrium based explanation for these longstanding empirical facts. The model is cast i......, and the dynamic cross-correlations of the volatility measures with the returns calculated from actual high-frequency intra-day data on the S&P 500 aggregate market and VIX volatility indexes....

  2. 78 FR 59949 - Annual Factors for Determining Public Housing Agency Administrative Fees for the Section 8...

    Science.gov (United States)

    2013-09-30

    ... DEPARTMENT OF HOUSING AND URBAN DEVELOPMENT [Docket No. FR-5724-N-02] Annual Factors for... Web site of the annual factors for determining the on-going administrative fee for housing agencies... Relay Service during business hours at 1-800-877-8337. SUPPLEMENTARY INFORMATION: The annual factors for...

  3. 46 CFR 401.400 - Calculation of pilotage units and determination of weighting factor.

    Science.gov (United States)

    2010-10-01

    ... weighting factor. 401.400 Section 401.400 Shipping COAST GUARD (GREAT LAKES PILOTAGE), DEPARTMENT OF... § 401.400 Calculation of pilotage units and determination of weighting factor. The equivalent pilotage... meters) Pilot Unit=(Length×Breadth×Depth)/10,000 (measured in feet) (b) Weighting factor table: Range of...

  4. Equilibrium calculations, ch. 6

    International Nuclear Information System (INIS)

    Deursen, A.P.J. van

    1976-01-01

    A calculation is presented of dimer intensities obtained in supersonic expansions. There are two possible limiting considerations; the dimers observed are already present in the source, in thermodynamic equilibrium, and are accelerated in the expansion. Destruction during acceleration is neglected, as are processes leading to newly formed dimers. On the other hand one can apply a kinetic approach, where formation and destruction processes are followed throughout the expansion. The difficulty of this approach stems from the fact that the density, temperature and rate constants have to be known at all distances from the nozzle. The simple point of view has been adopted and the measured dimer intensities are compared with the equilibrium concentration in the source. The comparison is performed under the assumption that the detection efficiency for dimers is twice the detection efficiency for monomers. The experimental evidence against the simple point of view that the dimers of the onset region are formed in the source already, under equilibrium conditions, is discussed. (Auth.)

  5. Service Quality: A Main Determinant Factor for Health Information System Success in Low-resource Settings.

    Science.gov (United States)

    Tilahun, Binyam; Fritz, Fleur

    2015-01-01

    With the increasing implementation of different health information systems in developing countries, there is a growing need to measure the main determinants of their success. The results of this evaluation study on the determinants of HIS success in five low resource setting hospitals show that service quality is the main determinant factor for information system success in those kind of settings.

  6. Noncompact Equilibrium Points and Applications

    Directory of Open Access Journals (Sweden)

    Zahra Al-Rumaih

    2012-01-01

    Full Text Available We prove an equilibrium existence result for vector functions defined on noncompact domain and we give some applications in optimization and Nash equilibrium in noncooperative game.

  7. Equilibrium thermodynamics - Callen's postulational approach

    NARCIS (Netherlands)

    Jongschaap, R.J.J.; Öttinger, Hans Christian

    2001-01-01

    In order to provide the background for nonequilibrium thermodynamics, we outline the fundamentals of equilibrium thermodynamics. Equilibrium thermodynamics must not only be obtained as a special case of any acceptable nonequilibrium generalization but, through its shining example, it also elucidates

  8. MHD equilibrium with toroidal rotation

    International Nuclear Information System (INIS)

    Li, J.

    1987-03-01

    The present work attempts to formulate the equilibrium of axisymmetric plasma with purely toroidal flow within ideal MHD theory. In general, the inertial term Rho(v.Del)v caused by plasma flow is so complicated that the equilibrium equation is completely different from the Grad-Shafranov equation. However, in the case of purely toroidal flow the equilibrium equation can be simplified so that it resembles the Grad-Shafranov equation. Generally one arbitrary two-variable functions and two arbitrary single variable functions, instead of only four single-variable functions, are allowed in the new equilibrium equations. Also, the boundary conditions of the rotating (with purely toroidal fluid flow, static - without any fluid flow) equilibrium are the same as those of the static equilibrium. So numerically one can calculate the rotating equilibrium as a static equilibrium. (author)

  9. Java project on periodontal diseases. The natural development of periodontitis: risk factors, risk predictors and risk determinants : risk factors, risk predictors and risk determinants

    NARCIS (Netherlands)

    Van der Velden, U.; Abbas, F.; Armand, S.; Loos, B. G.; Timmerman, M. F.; Van der Weijden, G. A.; Van Winkelhoff, A. J.; Winkel, E. G.

    Objective: To identify risk factors, risk predictors and risk determinants for onset and progression of periodontitis. Material and Methods: For this longitudinal, prospective study all subjects in the age range 15-25 years living in a village of approximately 2000 inhabitants at a tea estate on

  10. Determining Motivators and Hygiene Factors among Excellent Teachers in Malaysia: An Experience of Confirmatory Factor Analysis

    Science.gov (United States)

    Amzat, Ismail Hussein; Don, Yahya; Fauzee, Sofian Omar; Hussin, Fauzi; Raman, Arumugam

    2017-01-01

    Purpose: In a world in which successful learning is believed to rest on the methods of teaching and the performance of students is determined by teacher quality, it is clear that teachers are the backbone of student learning attainments. In such a scenario, teacher development, welfare, motivation, and satisfaction are crucial for better teaching…

  11. Enhancing China’s energy security: Determining influential factors and effective strategic measures

    International Nuclear Information System (INIS)

    Ren, Jingzheng; Sovacool, Benjamin K.

    2014-01-01

    Highlights: • The most influential factors affecting China’s energy security are identified. • Fuzzy AHP is used to quantify the importance of influential factors. • Strategic measures for enhancing China’s energy security are prioritized. • Fuzzy AHP is used to determine the priorities of the strategic measures. - Abstract: This study investigates the most influential factors affecting China’s energy security. It also identifies the most effective strategic measures for enhancing it. Fuzzy AHP has been used to determine weights for ranking the importance of Chinese energy security factors, and it has also been used to determine the priorities of the strategic measures with respect to enhancing those same factors. The study argues that a low proportion of renewable energy penetration is the most severe factor threatening China’s energy security, and that conducting research and development on energy technologies and improving energy efficiency is the most salient, positive, and necessary strategic measure

  12. Enhancing China’s Energy Security: Determining Influential Factors and Effective Strategic Measures

    DEFF Research Database (Denmark)

    Ren, Jingzheng; Sovacool, Benjamin

    2014-01-01

    This study investigates the most influential factors affecting China’s energy security. It also identifies the most effective strategic measures for enhancing it. Fuzzy AHP has been used to determine weights for ranking the importance of Chinese energy security factors, and it has also been used...... to determine the priorities of the strategic measures with respect to enhancing those same factors. The study argues that a low proportion of renewable energy penetration is the most severe factor threatening China’s energy security, and that conducting research and development on energy technologies...

  13. What factors determine patients' preference for tumour necrosis factor inhibitors in ankylosing spondylitis?

    Science.gov (United States)

    Fajri, Dessy W; Brand, Caroline A; Dharmage, Shyamali C; Martin, Belinda J; Buchanan, Russell R C; Schachna, Lionel

    2009-05-01

    Tumour necrosis factor inhibitor (TNFi) therapy, either intravenous (IV) or subcutaneous (SQ), demonstrates similar efficacy in ankylosing spondylitis (AS). The objective of this study was to examine factors influencing patient preference of TNFi. Fifty-nine (79.7%) participants were male with mean age 43.9 years and disease duration of 22.0 years. Fifty-nine patients (79.7%) agreed with the statement 'My doctor gave me a choice and I made a decision based on my personal preference'. Patients commenced first on IV TNFi most commonly cited reduced frequency of injections (96.6%), administration by a trained professional (89.7%) and use of infusion time for leisure activities (86.2%). Patients commenced on SQ TNFi cited flexibility with timing of treatment (80%), shortened administration time (73.3%) and the convenience of home therapy (73.3%). Shared clinical decision-making between clinicians and patients may be desirable for AS patients commencing TNFi therapy.

  14. Non-equilibrium thermodynamics

    CERN Document Server

    De Groot, Sybren Ruurds

    1984-01-01

    The study of thermodynamics is especially timely today, as its concepts are being applied to problems in biology, biochemistry, electrochemistry, and engineering. This book treats irreversible processes and phenomena - non-equilibrium thermodynamics.S. R. de Groot and P. Mazur, Professors of Theoretical Physics, present a comprehensive and insightful survey of the foundations of the field, providing the only complete discussion of the fluctuating linear theory of irreversible thermodynamics. The application covers a wide range of topics: the theory of diffusion and heat conduction, fluid dyn

  15. Ecological Factors Determining Abundance of Parasitic Mites on Aedes spp. Larvae

    Directory of Open Access Journals (Sweden)

    Nurhadi Eko Firmansyah

    2017-12-01

    Full Text Available Ability to infestation and abundance of parasitic mites in Aedes spp. larvae cannot be separated from the influence of various factors. Ecological factors have been suggested to play a role determine the presence of parasitic mites that under certain conditions become a key factor in determining the abundance of parasitic mites on Aedes spp. larvae. The aim of this study to determine the ecological factors affect the abundance of parasitic mites on Aedes spp. larvae in Bogor Regency. Capturing of Aedes spp. larvae was performed directly on the habitats found in indoor and outdoor. Capturing mites in the body of Aedes spp. larvae was performed using insect forceps. Ecological factors measured were dissolved oxygen (DO, pH, temperature, and total dissolved solid (TDS. The influence of ecological factors was analyzed using regression and correlation analysis. The result of mite identification has been obtained three species of mites that are Halacarus sp., Histiostoma sp., and Hydrozetes sp. The result indicated that total dissolved solid (TDS and temperature was the factors that determined the abundance of mites. The factors of pH, and dissolved oxygen (DO did not determine the abundance of parasitic mites of Aedes spp. larvae. The research result can be further developed as a new alternative to Dengue Hemorraghic Fever control and provide information on parasitic mites that infest Aedes spp. larvae. In addition, this results become an early step in controlling of Aedes spp. strategy platform by the parasitic mites.

  16. Determination of engineering safety factor -routine in Hungary (a methodology for the normal operation local power engineering safety factors)

    International Nuclear Information System (INIS)

    Szecsenyi, Z.; Korpas, L.; Bona, G.; Kereszturi, A.

    2010-01-01

    From the late nineties Paks Nuclear Power Plant-in collaboration with KFKI Atomic Energy Research Institute (KFKI AEKI)- is developing a system for determining the normal operation local power engineering safety factors. The system is based on a Monte Carlo sampling of the uncertain model input parameters. Additionally, the comparison of the calculation to the in-core measurements plays essential role for determining some important input parameters. By using new fuel types and the corresponding more recent detailed technological data, the applied method is being improved from time to time. Presently, the actually used and authorized engineering safety factors at Paks NPP are determined by using this method. In the paper, the system.s main properties are described (not going beyond the possible extent). The main points are as follows:-Mathematical definition of the engineering safety factor;-Sources of the uncertainties;-Input error propagation method constituting the basis of the system;-Flow-chart of the subsequent steps of the determination Finally, in the paper the engineering safety factors values of some selected parameters are presented as examples for demonstration of the capability of the method. (Authors)

  17. Area Factor Determinations for an Industrial Worker Exposed to a Concrete Slab End-State

    International Nuclear Information System (INIS)

    Jannik, G. Timothy; Lee, Patricia L.; Farfan, Eduardo B.; Roach, Jesse L.

    2008-01-01

    The U.S. Department of Energy's (DOE) Savannah River Site (SRS) is decommissioning many of its excess facilities through removal of the facility structures leaving only the concrete-slab foundations in place. Site-specific, risk-based derived concentration guideline levels (DCGLs) for radionuclides have been determined for a future industrial worker potentially exposed to residual contamination on these concrete slabs as described in Jannik. These risk-based DCGLs were estimated for an exposure area of 100 m 2 . During deactivation and decommissioning (D and D) operations at SRS, the need for area factors for larger and smaller contaminated areas arose. This paper compares the area factors determined for an industrial worker exposed to a concrete slab end-state for several radionuclides of concern at SRS with 1) the illustrative area factors provided in MARSSIM, 2) the area correction factors provided in the U.S. Environmental Protection Agency's (EPA) Soil Screening Guidance, and 3) the hot spot criterion for field application provided in the RESRAD User's Manual. The purpose of this site-specific assessment is to determine if any of the recommended area factors provided in the guidance documents could be utilized at SRS for field applications of the industrial worker DCGLs. Results show the area factors that were determined for an SRS industrial worker exposed to concrete slab end-states for the common radionuclides provided in the referenced guidance documents. In addition to the SRS site-specific area factors, the following area factors are provided for comparison: - Illustrative examples of outdoor area dose factors (MARSSIM); - Area correction factors as a function of source area (Soil Screening Guidance). Note: the area correction factors were inverted to correspond to a DCGL area factor. - Recommended area correction factors as a function of source area (Soil Screening Guidance); - Ranges for hot spot multiplication factors (RESRAD). As it can be seen

  18. Equilibrium distribution function in collisionless systems

    International Nuclear Information System (INIS)

    Pergamenshchik, V.M.

    1988-01-01

    Collisionless systems of a large number of N particles interacting by Coulomb forces are widely spread in cosmic and laboratory plasma. A statistical theory of equilibrium state of collisionless Coulomb systems which evolution obeys Vlasov equation is proposed. The developed formalism permits a sequential consideration of such distributed in one-particle six-dimensional phase space of a system and to obtain a simple result: equilibrium distribution function has the form of Fermi-Dirac distribution and doesn't depend on initial state factors

  19. Factors that determine the effectiveness of screening for congenital heart malformations at child health centres

    NARCIS (Netherlands)

    R.E. Juttmann (Rikard); J. Hess (Jakob); C.W.N. Looman (Caspar); P.J. van der Maas (Paul)

    2000-01-01

    textabstractBACKGROUND: The actual yield from current screening for clinically significant congenital heart malformations in Dutch child health care is far from optimal. In this study factors that determine the effectiveness of this screening are identified and

  20. Determination of OB/OD/SF Emission Factors Using Unmanned Aerial Systems

    Science.gov (United States)

    A presentation to the Demilitarization Symposium. This proposal will present the methods of tethered aerostat and unmanned aerial system for collection of plume samples and determination of emission factors form open burning, open detonation, and static firing for weapon demilita...

  1. Determinants of the acetate recovery factor: implications for estimation of 13C substrate oxidation.

    NARCIS (Netherlands)

    P. Schrauwen; E.E. Blaak; A.J.M. Wagenmakers; dr. Lars B. Borghouts; D.P.C. van Aggel-Leijssen

    2000-01-01

    The data of this study indicate that the acetate recovery factor, used in stable isotope research, needs to be deteremined in every subject, under similar conditions as used for the tracer-derived determination of substrate oxidation.

  2. The Lewis Chemical Equilibrium Program with parametric study capability

    Science.gov (United States)

    Sevigny, R.

    1981-01-01

    The program was developed to determine chemical equilibrium in complex systems. Using a free energy minimization technique, the program permits calculations such as: chemical equilibrium for assigned thermodynamic states; theoretical rocket performance for both equilibrium and frozen compositions during expansion; incident and reflected shock properties; and Chapman-Jouget detonation properties. It is shown that the same program can handle solid coal in an entrained flow coal gasification problem.

  3. Thermal equilibrium of goats.

    Science.gov (United States)

    Maia, Alex S C; Nascimento, Sheila T; Nascimento, Carolina C N; Gebremedhin, Kifle G

    2016-05-01

    The effects of air temperature and relative humidity on thermal equilibrium of goats in a tropical region was evaluated. Nine non-pregnant Anglo Nubian nanny goats were used in the study. An indirect calorimeter was designed and developed to measure oxygen consumption, carbon dioxide production, methane production and water vapour pressure of the air exhaled from goats. Physiological parameters: rectal temperature, skin temperature, hair-coat temperature, expired air temperature and respiratory rate and volume as well as environmental parameters: air temperature, relative humidity and mean radiant temperature were measured. The results show that respiratory and volume rates and latent heat loss did not change significantly for air temperature between 22 and 26°C. In this temperature range, metabolic heat was lost mainly by convection and long-wave radiation. For temperature greater than 30°C, the goats maintained thermal equilibrium mainly by evaporative heat loss. At the higher air temperature, the respiratory and ventilation rates as well as body temperatures were significantly elevated. It can be concluded that for Anglo Nubian goats, the upper limit of air temperature for comfort is around 26°C when the goats are protected from direct solar radiation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  4. Universality in equilibrium and away from it: A personal perspective

    International Nuclear Information System (INIS)

    Munoz, Miguel A.

    2011-01-01

    In this talk/paper I discuss the concept of universality in phase transitions and the question of whether universality classes are more robust in equilibrium than away from it. In both of these situations, the main ingredients determining universality are symmetries, conservation laws, the dimension of the space and of the order-parameter and the presence of long-range interactions or quenched disorder. The existence of detailed-balance and fluctuation-dissipation theorems imposes severe constraints on equilibrium systems, allowing to define universality classes in a very robust way; instead, non-equilibrium allows for more variability. Still, quite robust non-equilibrium universality classes have been identified in the last decades. Here, I discuss some examples in which (i) non-equilibrium phase transitions are simply controlled by equilibrium critical points, i.e. non-equilibrium ingredients turn out to be irrelevant in the renormalization group sense and (ii) non-equilibrium situations in which equilibrium seems to come out of the blue, generating an adequate effective description of intrinsically non-equilibrium problems. Afterwards, I shall describe different genuinely non-equilibrium phase transitions in which introducing small, apparently innocuous changes (namely: presence or absence of an underlying lattice, parity conservation in the overall number of particles, existence of an un-accessible vacuum state, deterministic versus stochastic microscopic rules, presence or absence of a Fermionic constraint), the critical behavior is altered, making the case for lack of robustness. However, it will be argued that in all these examples, there is an underlying good reason (in terms of general principles) for universality to be altered. The final conclusions are that: (i) robust universality classes exist both in equilibrium and non-equilibrium; (ii) symmetry and conservation principles are crucial in both, (iii) non-equilibrium allows for more variability (i

  5. Determination of vibration amplitudes and neutron-mechanical scale factors in the PWR nuclear power plant

    International Nuclear Information System (INIS)

    Kostic, Lj.; Heidemann, P.; Runkel, J.

    1997-01-01

    Displacements of vibrating reactor components which can not be measured by other means during normal reactor operation can be determined through the scale factors from the neutron spectra of signals measured by the standard in-core neutron instrumentation. Neutron-mechanical scale factors are determined for the vibrations of fuel assemblies and reactor pressure vessel/core barrel system using the signals of in-core neutron detectors and accelerometers. (author)

  6. Static Equilibrium Configurations of Charged Metallic Bodies ...

    African Journals Online (AJOL)

    In this paper we developed a simple numerical scheme to determine the static equilibrium configuration of charged metallic bodies by minimizing the potential energy function. The method developed has some advantages; it combines the general theory and the physical meanings nested in the mathematical model and this ...

  7. Realization of radioactive equilibrium in the KRISS radon chamber

    International Nuclear Information System (INIS)

    Lee, Mo Sung; Park, Tae Soon; Lee, Jong Man

    2013-01-01

    The maintenance of radioactive equilibrium between radon and its decay products in a radon chamber is necessary to calibrate radon decay product monitors. In this study, the activity concentrations of radon decay products have been measured, and mosquito-repellent incense has been used to produce aerosol particles in the chamber. Filter papers with 8 μm pore size were used to collect aerosol in the chamber. The activity concentrations of radon decay products have been evaluated by the Modified Tsivoglou Method. The correction factors due to the differences in counting time requirements of the Modified Tsivoglou Method and the time delay between consecutive measurements have been determined. Finally, the radioactive equilibrium has been confirmed by applying the Bateman equation. - Highlights: • The activity concentrations of radon decay products are evaluated by the Modified Tsivoglou Method. • Mosquito-repellent incense is used to produce aerosol particles in the radon chamber. • The radioactive equilibrium in the chamber was achieved within 2 days and confirmed by the Bateman equation

  8. 45 CFR 150.317 - Factors CMS uses to determine the amount of penalty.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Factors CMS uses to determine the amount of... RELATING TO HEALTH CARE ACCESS CMS ENFORCEMENT IN GROUP AND INDIVIDUAL INSURANCE MARKETS CMS Enforcement With Respect to Issuers and Non-Federal Governmental Plans-Civil Money Penalties § 150.317 Factors CMS...

  9. Regional determinants of FDI in China: a factor-based approach

    NARCIS (Netherlands)

    Martijn A. Boermans; Zhang Yi; Hein Roelfsema

    2011-01-01

    We empirically investigate the factors that drive the uneven regional distribution of foreign direct investment (FDI) across Chinese provinces from 1995 to 2006. We first perform a factor analysis to summarize information embodied in around 40 variables and derive four FDI determinants:

  10. Equilibrium structure of rare earth trihalides

    International Nuclear Information System (INIS)

    Oezgueven, Y.

    2004-01-01

    In this work, we have calculate the equilibrium structure of the yttrium tribromide (YBr 3 ) and its dimer using the interionic force model . In the determination of the model parameters of Y monomer and dimer we use the measured value of the breathing mode of molecular dimer in the pure molecular liquid. We compare our results for the equilibrium structure of molecular dimer namely, the bond lengths and bond angles, with measured values from electron diffraction and with the results of other theoretical calculations. The agreement between calculated and measured spectra frequencies of vibrational modes can be considered as very reasonable

  11. Algorithm For Hypersonic Flow In Chemical Equilibrium

    Science.gov (United States)

    Palmer, Grant

    1989-01-01

    Implicit, finite-difference, shock-capturing algorithm calculates inviscid, hypersonic flows in chemical equilibrium. Implicit formulation chosen because overcomes limitation on mathematical stability encountered in explicit formulations. For dynamical portion of problem, Euler equations written in conservation-law form in Cartesian coordinate system for two-dimensional or axisymmetric flow. For chemical portion of problem, equilibrium state of gas at each point in computational grid determined by minimizing local Gibbs free energy, subject to local conservation of molecules, atoms, ions, and total enthalpy. Major advantage: resulting algorithm naturally stable and captures strong shocks without help of artificial-dissipation terms to damp out spurious numerical oscillations.

  12. The radioactive equilibrium and determination methods for ratio e Ra/U; Desequilibrio Radiactivos-1. Metodo {sub {beta}}-{gamma}. Determinacion de la razon eRa/U. Valoracion del contenido en U{sub 3}O{sub 8}

    Energy Technology Data Exchange (ETDEWEB)

    Mingarro, E

    1966-07-01

    The main problems concerning the radioactive non-equilibrium on minerals and a simultaneous counting procedure for {beta}- and {gamma}- activities developed to solve those problems, are described. (Author)

  13. 41 CFR 101-25.202 - Factors to be used to determine assignment of purchase responsibility.

    Science.gov (United States)

    2010-07-01

    ... experience of agency purchasing and contracting officials and their operating units with due regard to... determine assignment of purchase responsibility. 101-25.202 Section 101-25.202 Public Contracts and Property... PROCUREMENT 25-GENERAL 25.2-Interagency Purchase Assignments § 101-25.202 Factors to be used to determine...

  14. Determining eyeball surface area directly exposed to the effects of external factors.

    Science.gov (United States)

    Juliszewski, Tadeusz; Kadłuczka, Filip; Kiełbasa, Paweł

    2016-01-01

    This article discusses determining the surface area of eyeballs of men and women exposed to the direct effects of external factors in the working environment. For one eye, the mean surface is 172-182 mm(2). The determined surface area can be used in formulas for calculating the exposure of eyeballs to harmful chemical substances in workplace air.

  15. Biocompatibility of degradable biomaterials : a study on the factors determining the inflammatory response against degradable polymers

    NARCIS (Netherlands)

    Lam, King Hong

    1992-01-01

    The study reported in this thesis was undertaken to obtain more insight in the role of various factors determining the outcome of the interaction between biodegradable polymers and the host in which they are implanted. In the end, the outcome of this interaction determines the success or failure of

  16. 24 CFR 30.80 - Factors in determining amount of civil money penalty.

    Science.gov (United States)

    2010-04-01

    ... civil money penalty. 30.80 Section 30.80 Housing and Urban Development Office of the Secretary, Department of Housing and Urban Development CIVIL MONEY PENALTIES: CERTAIN PROHIBITED CONDUCT Procedures § 30.80 Factors in determining amount of civil money penalty. After determining that a respondent has...

  17. Partial chemical equilibrium in fluid dynamics

    International Nuclear Information System (INIS)

    Ramshaw, J.D.

    1980-01-01

    An analysis is given for the flow of a multicomponent fluid in which an arbitrary number of chemical reactions may occur, some of which are in equilibrium while the others proceed kinetically. The primitive equations describing this situation are inconvenient to use because the progress rates omega-dot/sub s/ for the equilibrium reactions are determined implicitly by the associated equilibrium constraint conditions. Two alternative equivalent equation systems that are more pleasant to deal with are derived. In the first system, the omega-dot/sub s/ are eliminated by replacing the transport equations for the chemical species involved in the equilibrium reactions with transport equations for the basic components of which these species are composed. The second system retains the usual species transport equations, but eliminates the nonlinear algebraic equilibrium constraint conditions by deriving an explicit expression for the omega-dot/sub s/. Both systems are specialized to the case of an ideal gas mixture. Considerations involved in solving these equation systems numerically are discussed briefly

  18. Non-Equilibrium Thermodynamics in Multiphase Flows

    CERN Document Server

    Mauri, Roberto

    2013-01-01

    Non-equilibrium thermodynamics is a general framework that allows the macroscopic description of irreversible processes. This book introduces non-equilibrium thermodynamics and its applications to the rheology of multiphase flows. The subject is relevant to graduate students in chemical and mechanical engineering, physics and material science. This book is divided into two parts. The first part presents the theory of non-equilibrium thermodynamics, reviewing its essential features and showing, when possible, some applications. The second part of this book deals with how the general theory can be applied to model multiphase flows and, in particular, how to determine their constitutive relations. Each chapter contains problems at the end, the solutions of which are given at the end of the book. No prior knowledge of statistical mechanics is required; the necessary prerequisites are elements of transport phenomena and on thermodynamics. “The style of the book is mathematical, but nonetheless it remains very re...

  19. Computational studies in tokamak equilibrium and transport

    International Nuclear Information System (INIS)

    Braams, B.J.

    1986-01-01

    This thesis is concerned with some problems arising in the magnetic confinement approach to controlled thermonuclear fusion. The work address the numerical modelling of equilibrium and transport properties of a confined plasma and the interpretation of experimental data. The thesis is divided in two parts. Part 1 is devoted to some aspects of the MHD equilibrium problem, both in the 'direct' formulation (given an equation for the plasma current, the corresponding equilibrium is to be determined) and in the 'inverse' formulation (the interpretation of measurements at the plasma edge). Part 2 is devoted to numerical studies of the edge plasma. The appropriate Navier-Stokes system of fluid equations is solved in a two-dimensional geometry. The main interest of this work is to develop an understanding of particle and energy transport in the scrape-off layer and onto material boundaries, and also to contribute to the conceptual design of the NET/INTOR tokamak reactor experiment. (Auth.)

  20. Regret Theory and Equilibrium Asset Prices

    Directory of Open Access Journals (Sweden)

    Jiliang Sheng

    2014-01-01

    Full Text Available Regret theory is a behavioral approach to decision making under uncertainty. In this paper we assume that there are two representative investors in a frictionless market, a representative active investor who selects his optimal portfolio based on regret theory and a representative passive investor who invests only in the benchmark portfolio. In a partial equilibrium setting, the objective of the representative active investor is modeled as minimization of the regret about final wealth relative to the benchmark portfolio. In equilibrium this optimal strategy gives rise to a behavioral asset priciting model. We show that the market beta and the benchmark beta that is related to the investor’s regret are the determinants of equilibrium asset prices. We also extend our model to a market with multibenchmark portfolios. Empirical tests using stock price data from Shanghai Stock Exchange show strong support to the asset pricing model based on regret theory.

  1. Efficiency and attenuation correction factors determination in gamma spectrometric assay of bulk samples using self radiation

    International Nuclear Information System (INIS)

    Haddad, Kh.

    2009-02-01

    Gamma spectrometry forms the most important and capable tool for measuring radioactive materials. Determination of the efficiency and attenuation correction factors is the most tedious problem in the gamma spectrometric assay of bulk samples. A new experimental and easy method for these correction factors determination using self radiation was proposed in this work. An experimental study of the correlation between self attenuation correction factor and sample thickness and its practical application was also introduced. The work was performed on NORM and uranyl nitrate bulk sample. The results of proposed methods agreed with those of traditional ones.(author)

  2. A hybrid of fuzzy FMEA-AHP to determine factors affecting alternator failure causes

    Directory of Open Access Journals (Sweden)

    Reza Kiani Aslani

    2014-09-01

    Full Text Available This paper presents a method to determine factors influencing alternator failure causes. Failure Mode and Effects Analysis (FMEA is one of the first systematic techniques for failure analysis based on three factors including Probability (P, Severity (S and Detection (D. Traditional FMEA method considers equal weights for all three factors, however, in read-world cases; one may wish to consider various weights. The proposed study develops a mathematical model to determine optimal weights based on analytical hierarchy process technique. The implementation of the proposed study has been demonstrated for a read-world case study of alternator failure causes.

  3. Determination of factors through Monte Carlo method for Fricke dosimetry from 192Ir sources for brachytherapy

    International Nuclear Information System (INIS)

    David, Mariano Gazineu; Salata, Camila; Almeida, Carlos Eduardo

    2014-01-01

    The Laboratorio de Ciencias Radiologicas develops a methodology for the determination of the absorbed dose to water by Fricke chemical dosimetry method for brachytherapy sources of 192 Ir high dose rate and have compared their results with the laboratory of the National Research Council Canada. This paper describes the determination of the correction factors by Monte Carlo method, with the Penelope code. Values for all factors are presented, with a maximum difference of 0.22% for their determination by an alternative way. (author)

  4. Anthropometric Factors and Physical Condition Dominant Determinants Batting Skills in Softball

    Directory of Open Access Journals (Sweden)

    Arif Eka Saraya

    2018-05-01

    Full Text Available batting skills in softball requires several anthropometric factors and physical condition to play to improve skills. Anthropometric factors and physical condition, among others, height, arm length, arm muscle strength, hand-eye coordination, balance, and reaction time. This study aims to determine the anthropometric factors and the physical condition of the dominant determinant of batting skills in softball. This research approach uses a quantitative to design of confirmatory factor analysis. This study population is training student achievement softball in sports education university of riau. A sample of 100 people was obtained through a simple random sampling technique. The data used are taken through a series of tests of the independent and dependent variables. This research method through testing confirmatory factor KMO and Bartlett’s Test analysis using SPSS. Results from this research is: factor of anthropometri dominant physical condition and determinants batting skill in game of softball is arm length with value 0,788, arm muscle power with value 0,851 and time reaction of with value 0,737. The conclusion of this research is: factor of anthropometri dominant physical condition and determinants batting skill in game of softball is arm length, arm muscle power and time reaction

  5. The stability of Z-pinches with equilibrium flows

    International Nuclear Information System (INIS)

    Howell, D.F.

    1999-01-01

    According to Ideal Magnetohydrodynamic (MHD) theory the Z-pinch is an inherently unstable magnetic configuration. However it is possible that there exist regimes of operation whereby the predicted instabilities may be reduced or even eliminated. We must look to effects normally ignored in the Ideal MHD model in order to predict such regimes. In this thesis various non-ideal effects will be studied, namely the inclusion of equilibrium flow and finite Larmor radius effects. Astrophysical jets, for example those seen to be emitted from active galactic nuclei, are seen to persist for a greater time than suggested by Ideal MHD before the onset of instabilities. It is postulated that one of the contributing factors to this enhanced stability is the presence of a sheared axial flow. In this thesis we study the stability properties of the Z-pinch where flow is present in the equilibrium. It is found that a sheared axial flow generally has a stabilising effect, the degree of which is determined by the equilibrium and flow profiles, but that absolute stability cannot be achieved due to the onset of the Kelvin-Helmholtz instability. The effect of adding rotation has also been studied. It is found that adding rotation changes the equilibrium density profiles from the static case, and that it always has a destabilising effect. Another postulated method of stabilising the Z-pinch is by increasing the ratio of the ion Larmor radius to the pinch radius, and it is seen to have a stabilising effect for some equilibria in the collisionless regime. In this thesis we study the effects of increasing the Larmor radius in the collisional regime using the Hall fluid model. It is found that for free boundary modes the stability properties are unchanged for experimentally realistic values of the Larmor radius, but for fixed boundary modes a small stabilising effect is noted for some equilibria. (author)

  6. Equilibrium models and variational inequalities

    CERN Document Server

    Konnov, Igor

    2007-01-01

    The concept of equilibrium plays a central role in various applied sciences, such as physics (especially, mechanics), economics, engineering, transportation, sociology, chemistry, biology and other fields. If one can formulate the equilibrium problem in the form of a mathematical model, solutions of the corresponding problem can be used for forecasting the future behavior of very complex systems and, also, for correcting the the current state of the system under control. This book presents a unifying look on different equilibrium concepts in economics, including several models from related sciences.- Presents a unifying look on different equilibrium concepts and also the present state of investigations in this field- Describes static and dynamic input-output models, Walras, Cassel-Wald, spatial price, auction market, oligopolistic equilibrium models, transportation and migration equilibrium models- Covers the basics of theory and solution methods both for the complementarity and variational inequality probl...

  7. Grinding kinetics and equilibrium states

    Science.gov (United States)

    Opoczky, L.; Farnady, F.

    1984-01-01

    The temporary and permanent equilibrium occurring during the initial stage of cement grinding does not indicate the end of comminution, but rather an increased energy consumption during grinding. The constant dynamic equilibrium occurs after a long grinding period indicating the end of comminution for a given particle size. Grinding equilibrium curves can be constructed to show the stages of comminution and agglomeration for certain particle sizes.

  8. Para-equilibrium phase diagrams

    International Nuclear Information System (INIS)

    Pelton, Arthur D.; Koukkari, Pertti; Pajarre, Risto; Eriksson, Gunnar

    2014-01-01

    Highlights: • A rapidly cooled system may attain a state of para-equilibrium. • In this state rapidly diffusing elements reach equilibrium but others are immobile. • Application of the Phase Rule to para-equilibrium phase diagrams is discussed. • A general algorithm to calculate para-equilibrium phase diagrams is described. - Abstract: If an initially homogeneous system at high temperature is rapidly cooled, a temporary para-equilibrium state may result in which rapidly diffusing elements have reached equilibrium but more slowly diffusing elements have remained essentially immobile. The best known example occurs when homogeneous austenite is quenched. A para-equilibrium phase assemblage may be calculated thermodynamically by Gibbs free energy minimization under the constraint that the ratios of the slowly diffusing elements are the same in all phases. Several examples of calculated para-equilibrium phase diagram sections are presented and the application of the Phase Rule is discussed. Although the rules governing the geometry of these diagrams may appear at first to be somewhat different from those for full equilibrium phase diagrams, it is shown that in fact they obey exactly the same rules with the following provision. Since the molar ratios of non-diffusing elements are the same in all phases at para-equilibrium, these ratios act, as far as the geometry of the diagram is concerned, like “potential” variables (such as T, pressure or chemical potentials) rather than like “normal” composition variables which need not be the same in all phases. A general algorithm to calculate para-equilibrium phase diagrams is presented. In the limit, if a para-equilibrium calculation is performed under the constraint that no elements diffuse, then the resultant phase diagram shows the single phase with the minimum Gibbs free energy at any point on the diagram; such calculations are of interest in physical vapor deposition when deposition is so rapid that phase

  9. Determination of digitised radiograph magnification factors for pre-operative templating in hip prosthesis surgery

    Energy Technology Data Exchange (ETDEWEB)

    Descamps, Stephane [Hopital Gabriel Montpied, CHU de Clermont Ferrand, BP 69, Service de Chirurgie Orthopedique et Traumatologique, Clermont Ferrand Cedex 01 (France); Livesey, Christine; Learmonth, Ian Douglas [Southmead Hospital, Westbury-on-Trym, Bristol Implant Research Centre, Avon Orthopaedic Centre, Bristol (United Kingdom)

    2010-03-15

    With digital radiography development, information technology (IT) companies have developed specific software for templating procedures, requiring individual magnification assessments for each patient. The aim of this study was to determine the mean magnification factor of digital radiographs and to evaluate the possibility of using the mean magnification factor or clinical information in templating. We retrospectively evaluated 100 primary total hip arthroplasty digital radiographs using the femoral head prosthesis as a calliper to determinate the mean magnification factor. Working on the assumption that altitude of the hip during radiograph is decisive in modification of magnification factors, we also looked for a correlation between weight, body mass index (BMI), altitude and magnification factor. The magnification factor was 126% (121-130%). A relationship was found between magnification factor (Mf) and weight (Mf = 7.10{sup -4} x weight (kg) + 1.21), but not BMI. In 98% of cases, if the weight-correlated formula is used, the sizing is correct or the error is {+-} 1 mm. With the mean method the sizing is correct or within 1 mm in only 78.2% of cases. Levels of accuracy for the mean magnification factor and the weight-correlated formula are not as high as individual assessments using a calliper; however, they could be used in everyday practice where individual magnification factors have not been calculated. (orig.)

  10. Characteristic Determination Of Self Shielding Factor And Cadmium Ratio Of Cylindrical Probe

    International Nuclear Information System (INIS)

    Hamzah, Amir; Budi R, Ita; Pinem, Suriam

    1996-01-01

    Determination of thermal, epithermal and total self shielding factor and cadmium ratio of cylindrical probe has been done by measurement and calculation. Self shielding factor can be determined by dividing probe activity to Al-alloy probe activity. Due to the lack of cylindrical probe made of Al-alloy, self shielding factor can be determined by parabolic extrapolation of measured activities to 0 cm radius to divide those activities. Theoretically, self shielding factor can be determined by making numerical solution of two dimensional integral equations using Romberg method. To simplify, the calculation is based on single collision theory with the assumption of monoenergetic neutron and isotropic distribution. For gold cylindrical probe, the calculation results are quite close to the measurement one with the relative discrepancy for activities, cadmium ratio and self shielding factor of bare probe are less then 11.5%, 3,5% and 1.5% respectively. The program can be used for the calculation of other kinds of cylindrical probes. Due to dependency to radius, cylindrical probe made of copper has the best characteristic of self shielding factor and cadmium ratio

  11. Determination of Important Topographic Factors for Landslide Mapping Analysis Using MLP Network

    Directory of Open Access Journals (Sweden)

    Mutasem Sh. Alkhasawneh

    2013-01-01

    Full Text Available Landslide is one of the natural disasters that occur in Malaysia. Topographic factors such as elevation, slope angle, slope aspect, general curvature, plan curvature, and profile curvature are considered as the main causes of landslides. In order to determine the dominant topographic factors in landslide mapping analysis, a study was conducted and presented in this paper. There are three main stages involved in this study. The first stage is the extraction of extra topographic factors. Previous landslide studies had identified mainly six topographic factors. Seven new additional factors have been proposed in this study. They are longitude curvature, tangential curvature, cross section curvature, surface area, diagonal line length, surface roughness, and rugosity. The second stage is the specification of the weight of each factor using two methods. The methods are multilayer perceptron (MLP network classification accuracy and Zhou's algorithm. At the third stage, the factors with higher weights were used to improve the MLP performance. Out of the thirteen factors, eight factors were considered as important factors, which are surface area, longitude curvature, diagonal length, slope angle, elevation, slope aspect, rugosity, and profile curvature. The classification accuracy of multilayer perceptron neural network has increased by 3% after the elimination of five less important factors.

  12. Multiscale Spatial Assessment of Determinant Factors of Land Use Change: Study at Urban Area of Yogyakarta

    Science.gov (United States)

    Susilo, Bowo

    2017-12-01

    Studies of land use change have been undertaken by different researchers using various methods. Among those methods, modelling is widely utilized. Modelling land use change required several components remarked as model variables. Those represent any conditions or factors which considered relevant or have some degree of correlation to the changes of land use. Variables which have significant correlation to land use change are referred as determinant factors or driving forces. Those factors as well as changes of land use are distributed across space and therefore referred as spatial determinant factors. The main objective of the research was to examine land use change and its determinant factors. Area and location of land use change were analysed based on three different years of land use maps, which are 1993, 2000 and 2007. Spatial and temporal analysis were performed which emphasize to the influence of scale to both of analysis’s. Urban area of Yogyakarta was selected as study area. Study area covered three different districts (kabupaten), involving 20 sub districts and totally consists of 74 villages. Result of this study shows that during 14 years periods (1993 to 2007), there were about 1,460 hectares of land use change had been taken place. Dominant type of land use change is agricultural to residential. The uses of different spatial and temporal scale in analysis were able to reveal different factors related to land use change. In general, factors influencing the quantities of land use change in the study area were population growth and the availability of land. The use of data with different spatial resolution can reveal the presence of various factors associated with the location of the change. Locations of land use change were influenced or determined by accessibility factors.

  13. Determination of photon conversion factors relating exposure and dose for several extremity phantom designs

    International Nuclear Information System (INIS)

    Roberson, P.L.; Eichner, F.N.; Reece, W.D.

    1986-09-01

    This report presents the results of measurements of dosimetric properties of simple extremity phantoms suitable for use in extremity dosimeter performance testing. Two sizes of phantoms were used in this study. One size represented the forearm or lower leg and the other size represented the finger or toe. For both phantom sizes, measurements were performed on solid plastic phantoms and on phantoms containing simulated bone material to determine the effect of backscattered radiations from the bone on the surface dose. Exposure-to-dose conversion factors (C/sub x/ factors) were determined for photon energies ranging from 16 to 1250 keV (average for 60 Co). The effect of the presence of a phantom was also measured for a 90 Sr/ 90 Y source. Significant differences in the measured C/sub x/ factors were found among the phantoms investigated. The factors for the finger-sized phantoms were uniformly less than for the arm-sized phantoms

  14. Applicability of Donnan equilibrium theory at nanochannel-reservoir interfaces.

    Science.gov (United States)

    Tian, Huanhuan; Zhang, Li; Wang, Moran

    2015-08-15

    Understanding ionic transport in nanochannels has attracted broad attention from various areas in energy and environmental fields. In most pervious research, Donnan equilibrium has been applied widely to nanofluidic systems to obtain ionic concentration and electrical potential at channel-reservoir interfaces; however, as well known that Donnan equilibrium is derived from classical thermodynamic theories with equilibrium assumptions. Therefore the applicability of the Donnan equilibrium may be questionable when the transport at nanochannel-reservoir interface is strongly non-equilibrium. In this work, the Poisson-Nernst-Planck model for ion transport is numerically solved to obtain the exact distributions of ionic concentration and electrical potential. The numerical results are quantitatively compared with the Donnan equilibrium predictions. The applicability of Donnan equilibrium is therefore justified by changing channel length, reservoir ionic concentration, surface charge density and channel height. The results indicate that the Donnan equilibrium is not applicable for short nanochannels, large concentration difference and wide openings. A non-dimensional parameter, Q factor, is proposed to measure the non-equilibrium extent and the relation between Q and the working conditions is studied in detail. Copyright © 2015 Elsevier Inc. All rights reserved.

  15. Thermodynamic chemical energy transfer mechanisms of non-equilibrium, quasi-equilibrium, and equilibrium chemical reactions

    International Nuclear Information System (INIS)

    Roh, Heui-Seol

    2015-01-01

    Chemical energy transfer mechanisms at finite temperature are explored by a chemical energy transfer theory which is capable of investigating various chemical mechanisms of non-equilibrium, quasi-equilibrium, and equilibrium. Gibbs energy fluxes are obtained as a function of chemical potential, time, and displacement. Diffusion, convection, internal convection, and internal equilibrium chemical energy fluxes are demonstrated. The theory reveals that there are chemical energy flux gaps and broken discrete symmetries at the activation chemical potential, time, and displacement. The statistical, thermodynamic theory is the unification of diffusion and internal convection chemical reactions which reduces to the non-equilibrium generalization beyond the quasi-equilibrium theories of migration and diffusion processes. The relationship between kinetic theories of chemical and electrochemical reactions is also explored. The theory is applied to explore non-equilibrium chemical reactions as an illustration. Three variable separation constants indicate particle number constants and play key roles in describing the distinct chemical reaction mechanisms. The kinetics of chemical energy transfer accounts for the four control mechanisms of chemical reactions such as activation, concentration, transition, and film chemical reactions. - Highlights: • Chemical energy transfer theory is proposed for non-, quasi-, and equilibrium. • Gibbs energy fluxes are expressed by chemical potential, time, and displacement. • Relationship between chemical and electrochemical reactions is discussed. • Theory is applied to explore nonequilibrium energy transfer in chemical reactions. • Kinetics of non-equilibrium chemical reactions shows the four control mechanisms

  16. Factors affecting the determination of the isotopically exchangeable phosphorus in soils

    International Nuclear Information System (INIS)

    Morales, L.E.M.

    1981-06-01

    In order to evaluate the factors that affect the determination of the isotopically exchangeable phosphorus in soils (L value), various greenhouse experiments were carried out. The following factors were considered: carrier level; plant species; harvest time; nitrogen doses; nitrogen sources; culture conditions and soil type. A radioactive solution with an activity level of approximately 10 μCi 32 p/3 kg soil with different carrier levels was located in layers or mixed completely with the soil depending upon the experiment. (author)

  17. Determination of overall decontamination factors for common impurity elements in PHWR spent fuel reprocessing

    International Nuclear Information System (INIS)

    Pant, D.K.; Bhalerao, B.A.; Gupta, K.K.; Kulkarni, P.G.; Gurba, P.B.; Janardan, P.; Changrani, R.D.; Dey, P.K.

    2009-01-01

    An attempt has been made to determine overall decontamination factors for elemental impurities normally encountered in the U 3 O 8 product obtained by reprocessing of PHWR spent fuel. The solution obtained by dissolution of spent fuel and corresponding U 3 O 8 product were analyzed for 24 elemental impurities by ICP-AES for this purpose. Decontamination factors achieved for major neutron poisons are in the range of 200-400. (author)

  18. Supplier selection or collaboration? Determining factors of performance improvement when outsourcing manufacturing

    OpenAIRE

    Dabhilkar, Mandar; Bengtsson, Lars; Haartman, Robin von; Åhlström, Pär

    2009-01-01

    An empirical study was designed to determine factors of performance improvement when outsourcing manufacturing. Findings from a survey of 136 manufacturing plants in Sweden show that most of them achieve their outsourcing motives, but not without trade-offs. Factors of performance improvements such as economies of scale or operations in low-cost countries can improve one performance dimension, such as product cost, yet negatively impact volume flexibility, speed or product innovation. The res...

  19. Pre and post-natal risk and determination of factors for child obesity

    OpenAIRE

    Trandafir, LM; Temneanu, OR

    2016-01-01

    Obesity is considered a condition presenting a complex, multi-factorial etiology that implies genetic and non-genetic factors. The way the available information should be efficiently and strategically used in the obesity and overweight prohylaxisprogrammes for children all over the world is still unclear for most of the risk factors. Mothers? pre-conception weight and weight gain during pregnancy are two of the most important prenatal determinants of childhood obesity. Maternal obesity and ge...

  20. Optimization of headspace experimental factors to determine chlorophenols in water by means of headspace solid-phase microextraction and gas chromatography coupled with mass spectrometry and parallel factor analysis.

    Science.gov (United States)

    Morales, Rocío; Cruz Ortiz, M; Sarabia, Luis A

    2012-11-19

    In this work an analytical procedure based on headspace solid-phase microextraction and gas chromatography coupled with mass spectrometry (HS-SPME-GC/MS) is proposed to determine chlorophenols with prior derivatization step to improve analyte volatility and therefore the decision limit (CCα). After optimization, the analytical procedure was applied to analyze river water samples. The following analytes are studied: 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TrCP), 2,3,4,6-tetrachlorophenol (2,4,6-TeCP) and pentachlorophenol (PCP). A D-optimal design is used to study the parameters affecting the HS-SPME process and the derivatization step. Four experimental factors at two levels and one factor at three levels were considered: (i) equilibrium/extraction temperature, (ii) extraction time, (iii) sample volume, (iv) agitation time and (v) equilibrium time. In addition two interactions between four of them were considered. The D-optimal design enables the reduction of the number of experiments from 48 to 18 while maintaining enough precision in the estimation of the effects. As every analysis took 1h, the design is blocked in 2 days. The second-order property of the PARAFAC (parallel factor analysis) decomposition avoids the need of fitting a new calibration model each time that the experimental conditions change. In consequence, the standardized loadings in the sample mode estimated by a PARAFAC decomposition are the response used in the design because they are proportional to the amount of analyte extracted. It has been found that block effect is significant and that 60°C equilibrium temperature together with 25min extraction time are necessary to achieve the best extraction for the chlorophenols analyzed. The other factors and interactions were not significant. After that, a calibration based in a PARAFAC2 decomposition provided the following values of CCα: 120, 208, 86, 39ngL(-1) for 2,4-DCP, 2,4,6-TrCP, 2,3,4,5-TeCP and PCP respectively for a

  1. The basics of experimental determination of the Fano factor in intrinsic semiconductors

    International Nuclear Information System (INIS)

    Samedov, Victor-V.

    2013-06-01

    Intrinsic semiconductors such as High Purity Germanium Detectors are exceptional X-ray and gamma-ray detectors because of their large sizes and small band gap. They are used for fundamental scientific researches, nuclear material safeguards and security, environmental protection, and human health and safety. The fundamental limit of the energy resolution of a semiconductor detector is determined by variance in the number of electron-hole pairs produced by X-rays in detector volume. The principal characteristic of material for using as semiconductor detector is the Fano factor that determines the fluctuation in the number of electron-hole pairs. Now, all existing methods of experimental determination of the Fano factor in semiconductors are based on the subtraction of electronic noise from the signal variance. In this work, I propose the method of experimental determination of the Fano factor in a planar semiconductor detector based on dependences of the mean amplitude and the energy resolution on the electric field. It was shown that inverse electric field expansion of these dependences allow determining the Fano factor, electron mobility lifetime product, and relative variance of electron lifetime due to inhomogeneous charge transport in semiconductor material. The important advantage of the proposed method is independence on detector electronic noise. (authors)

  2. Fundamental functions in equilibrium thermodynamics

    NARCIS (Netherlands)

    Horst, H.J. ter

    In the standard presentations of the principles of Gibbsian equilibrium thermodynamics one can find several gaps in the logic. For a subject that is as widely used as equilibrium thermodynamics, it is of interest to clear up such questions of mathematical rigor. In this paper it is shown that using

  3. Non-equilibrium synergistic effects in atmospheric pressure plasmas.

    Science.gov (United States)

    Guo, Heng; Zhang, Xiao-Ning; Chen, Jian; Li, He-Ping; Ostrikov, Kostya Ken

    2018-03-19

    Non-equilibrium is one of the important features of an atmospheric gas discharge plasma. It involves complicated physical-chemical processes and plays a key role in various actual plasma processing. In this report, a novel complete non-equilibrium model is developed to reveal the non-equilibrium synergistic effects for the atmospheric-pressure low-temperature plasmas (AP-LTPs). It combines a thermal-chemical non-equilibrium fluid model for the quasi-neutral plasma region and a simplified sheath model for the electrode sheath region. The free-burning argon arc is selected as a model system because both the electrical-thermal-chemical equilibrium and non-equilibrium regions are involved simultaneously in this arc plasma system. The modeling results indicate for the first time that it is the strong and synergistic interactions among the mass, momentum and energy transfer processes that determine the self-consistent non-equilibrium characteristics of the AP-LTPs. An energy transfer process related to the non-uniform spatial distributions of the electron-to-heavy-particle temperature ratio has also been discovered for the first time. It has a significant influence for self-consistently predicting the transition region between the "hot" and "cold" equilibrium regions of an AP-LTP system. The modeling results would provide an instructive guidance for predicting and possibly controlling the non-equilibrium particle-energy transportation process in various AP-LTPs in future.

  4. Determinant factors in the integration of information and communication technologies in teaching

    Directory of Open Access Journals (Sweden)

    Eric A. Bordios

    2016-12-01

    Full Text Available Binary Logistic Regression and Exploratory Factor Analysis (EFA were employed to determine factors that can influence teachers’ decision whether or not to integrate Information and communication technology (ICT in teaching and also to uncover ABC (Attitudes, Beliefs, Confidence as the factors to be considered which subsequently came out as predictors of the study along with age and grade level taught. Results implied that along with the efforts of the government to provide physical resources to implement the Department of Education Computerization Program, teachers as the main drivers of this initiative must be engaged in conceptual change regarding their ABC toward ICTintegration.

  5. A Multiperiod Equilibrium Pricing Model

    Directory of Open Access Journals (Sweden)

    Minsuk Kwak

    2014-01-01

    Full Text Available We propose an equilibrium pricing model in a dynamic multiperiod stochastic framework with uncertain income. There are one tradable risky asset (stock/commodity, one nontradable underlying (temperature, and also a contingent claim (weather derivative written on the tradable risky asset and the nontradable underlying in the market. The price of the contingent claim is priced in equilibrium by optimal strategies of representative agent and market clearing condition. The risk preferences are of exponential type with a stochastic coefficient of risk aversion. Both subgame perfect strategy and naive strategy are considered and the corresponding equilibrium prices are derived. From the numerical result we examine how the equilibrium prices vary in response to changes in model parameters and highlight the importance of our equilibrium pricing principle.

  6. Non-equilibrium phase transitions

    CERN Document Server

    Henkel, Malte; Lübeck, Sven

    2009-01-01

    This book describes two main classes of non-equilibrium phase-transitions: (a) static and dynamics of transitions into an absorbing state, and (b) dynamical scaling in far-from-equilibrium relaxation behaviour and ageing. The first volume begins with an introductory chapter which recalls the main concepts of phase-transitions, set for the convenience of the reader in an equilibrium context. The extension to non-equilibrium systems is made by using directed percolation as the main paradigm of absorbing phase transitions and in view of the richness of the known results an entire chapter is devoted to it, including a discussion of recent experimental results. Scaling theories and a large set of both numerical and analytical methods for the study of non-equilibrium phase transitions are thoroughly discussed. The techniques used for directed percolation are then extended to other universality classes and many important results on model parameters are provided for easy reference.

  7. Determination of the Main Influencing Factors on Road Fatalities Using an Integrated Neuro-Fuzzy Algorithm

    Directory of Open Access Journals (Sweden)

    Amir Masoud Rahimi

    Full Text Available Abstract This paper proposed an integrated algorithm of neuro-fuzzy techniques to examine the complex impact of socio-technical influencing factors on road fatalities. The proposed algorithm could handle complexity, non-linearity and fuzziness in the modeling environment due to its mechanism. The Neuro-fuzzy algorithm for determination of the potential influencing factors on road fatalities consisted of two phases. In the first phase, intelligent techniques are compared for their improved accuracy in predicting fatality rate with respect to some socio-technical influencing factors. Then in the second phase, sensitivity analysis is performed to calculate the pure effect on fatality rate of the potential influencing factors. The applicability and usefulness of the proposed algorithm is illustrated using the data in Iran provincial road transportation systems in the time period 2012-2014. Results show that road design improvement, number of trips, and number of passengers are the most influencing factors on provincial road fatality rate.

  8. Determination and modeling of binary and ternary solid-liquid phase equilibrium for the systems formed by 1,8-dinitronaphthalene and 1,5-dinitronaphthalene and N-methyl-2-pyrrolidone

    International Nuclear Information System (INIS)

    Xie, Yong; Du, Cunbin; Cong, Yang; Wang, Jian; Han, Shuo; Zhao, Hongkun

    2016-01-01

    Highlights: • SLE formed by 1,5 and/or 1,8-dinitronaphthalene and NMP was determined. • The binary and ternary phase diagrams were constructed. • The phase diagrams were correlated and calculated using thermodynamic models. - Abstract: The solubility of 1,8-dinitronaphthalene and 1,5-dinitronaphthalene in N-methyl-2-pyrrolidone at (293.15–343.15) K and the mutual solubility of the ternary 1,5-dinitronaphthalene + 1,8-dinitronaphthalene + N-methyl-2-pyrrolidone mixture at (313.15, 328.15 and 343.15) K were determined experimentally using the isothermal saturation method under atmospheric pressure (101.2 kPa). The solubility of 1,8-dinitronaphthalene in N-methyl-2-pyrrolidone is larger than that of 1,5-dinitronaphthalene. Three isothermal ternary phase diagrams were built according to the measured mutual solubility data. In each ternary phase diagram, there were one co-saturated point, two boundary curves, and three crystalline regions. Two pure solids (pure 1,8-dinitronaphthalene and pure 1,5-dinitronaphthalene) were formed in the ternary system at a given temperature, which were identified by Schreinemaker’s method of wet residue and powder X-ray diffraction (PXRD) pattern. The crystallization region of 1,8-dinitronaphthalene was smaller than that of 1,5-dinitronaphthalene at each temperature. The modified Apelblat equation, λh equation, NRTL model and Wilson model were used to correlate the solubility of 1,8-dinitronaphthalene and 1,5-dinitronaphthalene in N-methyl-2-pyrrolidone; and the NRTL and Wilson models were employed to correlate and calculate the mutual solubility for the ternary 1,5-dinitronaphthalene + 1,8-dinitronaphthalene + N-methyl-2-pyrrolidone system. The largest value of root-mean-square deviation (RMSD) was 20.34 × 10 −4 for the binary systems; and 7.38 × 10 −3 for ternary system. The calculated results via these models are all acceptable for the binary and ternary solid-liquid phase equilibrium.

  9. The Equilibrium Real Exchange Rate of the Malagasy Franc; Estimation and Assessment

    OpenAIRE

    John Cady

    2003-01-01

    Employing cointegration techniques, the long-run determinants of Madagascar's real exchange rate are examined from a stock-flow perspective. The long-run behavior of the real effective exchange rate is explained by the net foreign asset position and factors affecting trade flows. An index of the long-run equilibrium real exchange rate is developed to assess the degree of misalignment. The general conclusions are that the Malagasy franc has experienced significant misalignment in the past, but...

  10. A determination of elementary separation factors of isotopes 235U and 238U in the ionic exchange process and of eluents in the water-glycerine system

    International Nuclear Information System (INIS)

    Murgulescu, S.E.

    1977-01-01

    In the experiments focused on uranium isotope separation by ion and chemical exchange, the water-glycerine system was employed. The principle of the method consists in shifting a uranium band along an ion-exchange resin column by means of an eluent. The isotope effect of reactions determining the band heading into the column where complex bands between the metal ion and the ligand form and break up under the resin influence, is determined by the difference in affinity between the two isotopes as against the eluent. The isotope effect in question determines a unit deviation of the equilibrium constant for the classical isotope exchange reaction. Starting from the experimental results obtained, it was concluded that the ion and chemical exchange between the IV and VI valence forms of uranium can be applied to isotope separation in terms of the separation unit. As against the methods that have been applied at present (gaseous scattering, hydro-extracting and the nozzle method), for which every new stage corresponds to a separation elementary factor, several separation elementary factors can be cumulated into a single stage in a chemical and ion exchange unit, by the optimization of the shifting band and length. (author)

  11. Exploring Relationships Among Belief in Genetic Determinism, Genetics Knowledge, and Social Factors

    Science.gov (United States)

    Gericke, Niklas; Carver, Rebecca; Castéra, Jérémy; Evangelista, Neima Alice Menezes; Marre, Claire Coiffard; El-Hani, Charbel N.

    2017-12-01

    Genetic determinism can be described as the attribution of the formation of traits to genes, where genes are ascribed more causal power than what scientific consensus suggests. Belief in genetic determinism is an educational problem because it contradicts scientific knowledge, and is a societal problem because it has the potential to foster intolerant attitudes such as racism and prejudice against sexual orientation. In this article, we begin by investigating the very nature of belief in genetic determinism. Then, we investigate whether knowledge of genetics and genomics is associated with beliefs in genetic determinism. Finally, we explore the extent to which social factors such as gender, education, and religiosity are associated with genetic determinism. Methodologically, we gathered and analyzed data on beliefs in genetic determinism, knowledge of genetics and genomics, and social variables using the "Public Understanding and Attitudes towards Genetics and Genomics" (PUGGS) instrument. Our analyses of PUGGS responses from a sample of Brazilian university freshmen undergraduates indicated that (1) belief in genetic determinism was best characterized as a construct built up by two dimensions or belief systems: beliefs concerning social traits and beliefs concerning biological traits; (2) levels of belief in genetic determination of social traits were low, which contradicts prior work; (3) associations between knowledge of genetics and genomics and levels of belief in genetic determinism were low; and (4) social factors such as age and religiosity had stronger associations with beliefs in genetic determinism than knowledge. Although our study design precludes causal inferences, our results raise questions about whether enhancing genetic literacy will decrease or prevent beliefs in genetic determinism.

  12. A More Practical Method for Explaining Equilibrium

    OpenAIRE

    Yi-Jang Yu

    2014-01-01

    The aim of this study is to suggest a more practical method for explaining market equilibrium in a two-dimensional risk-return world. Its main difference from textbook contents is to define, in both qualitative and quantitative ways, the environment or the system factor and treat it as an endogenous variable. Once the two-dimensional framework that is capable of managing uncertainty and environmental relationship can be reasonably established, a greater number of economic issues can be effect...

  13. Performance related factors are the main determinants of the von Willebrand factor response to exhaustive physical exercise.

    Science.gov (United States)

    van Loon, Janine E; Sonneveld, Michelle A H; Praet, Stephan F E; de Maat, Moniek P M; Leebeek, Frank W G

    2014-01-01

    Physical stress triggers the endothelium to release von Willebrand Factor (VWF) from the Weibel Palade bodies. Since VWF is a risk factor for arterial thrombosis, it is of great interest to discover determinants of VWF response to physical stress. We aimed to determine the main mediators of the VWF increase by exhaustive physical exercise. 105 healthy individuals (18-35 years) were included in this study. Each participant performed an incremental exhaustive exercise test on a cycle ergometer. Respiratory gas exchange measurements were obtained while cardiac function was continuously monitored. Blood was collected at baseline and directly after exhaustion. VWF antigen (VWF:Ag) levels, VWF collagen binding (VWF:CB) levels, ADAMTS13 activity and common variations in Syntaxin Binding Protein-5 (STXBP5, rs1039084 and rs9399599), Syntaxin-2 (STX2, rs7978987) and VWF (promoter, rs7965413) were determined. The median VWF:Ag level at baseline was 0.94 IU/mL [IQR 0.8-1.1] and increased with 47% [IQR 25-73] after exhaustive exercise to a median maximum VWF:Ag of 1.38 IU/mL [IQR 1.1-1.8] (pexercise (median increase 43% and 12%, both pexercise (females 1.2 IU/mL; males 1.7 IU/mL, p = 0.001), which was associated by a difference in performance. Genetic variations in STXBP5, STX2 and the VWF promoter were not associated with VWF:Ag levels at baseline nor with the VWF:Ag increase. VWF:Ag levels strongly increase upon exhaustive exercise and this increase is strongly determined by physical fitness level and the intensity of the exercise, while there is no clear effect of genetic variation in STXBP5, STX2 and the VWF promoter.

  14. Factors determining variations in otolith microincrement width of demersal juvenile Baltic cod Gadus morhua

    DEFF Research Database (Denmark)

    Hüssy, Karin; Mosegaard, Henrik; Hinrichsen, H.H.

    2003-01-01

    by comparison with laboratory-reared individuals, and to investigate the factors determining variation in these increments. The different increment-width patterns were identified with a method based on the widths of consecutive increments. Otolith increment widths of juvenile cod were found to be highly...

  15. An experimental method to determine the electrostatic field enhancement factor of a practical conductor surface

    DEFF Research Database (Denmark)

    McAllister, Iain Wilson; Crichton, George C

    1989-01-01

    A method of determining the field enhancement factor of a practical conductor is presented. The method is developed from a modified theory of discharge onset in a gaseous medium. This modification incorporates the influence of conductor surface roughness. Onset data from an experimental study...

  16. Factors of Attrition in Cohort Doctoral Education: A Self-Determination Theory Perspective

    Science.gov (United States)

    Garcia, Linda Ann

    2013-01-01

    Attrition rates, completion rates, and time to degree are the key areas researchers have sought to examine influencing factors and patterns of behavior that describe the departure process of students in doctoral study. Through the lens of self-determination theory (Deci & Ryan, 1985), the purpose of this phenomenological qualitative study was…

  17. Determinants of Business Student Satisfaction and Retention in Higher Education: Applying Herzberg's Two-Factor Theory

    Science.gov (United States)

    DeShields, Oscar W., Jr.; Kara, Ali; Kaynak, Erdener

    2005-01-01

    Purpose: This paper focuses on the determinants of student satisfaction and retention in a college or university that are assumed to impact students' college experience. Design/methodology/approach: Using empirical data and Herzberg's two-factor theory, a modified version of the questionnaire developed by Keaveney and Young was administered to…

  18. Agri-Environmental Resource Management by Large-Scale Collective Action: Determining KEY Success Factors

    Science.gov (United States)

    Uetake, Tetsuya

    2015-01-01

    Purpose: Large-scale collective action is necessary when managing agricultural natural resources such as biodiversity and water quality. This paper determines the key factors to the success of such action. Design/Methodology/Approach: This paper analyses four large-scale collective actions used to manage agri-environmental resources in Canada and…

  19. 42 CFR 3.408 - Factors considered in determining the amount of a civil money penalty.

    Science.gov (United States)

    2010-10-01

    ... civil money penalty. 3.408 Section 3.408 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL PROVISIONS PATIENT SAFETY ORGANIZATIONS AND PATIENT SAFETY WORK PRODUCT Enforcement Program § 3.408 Factors considered in determining the amount of a civil money penalty. In...

  20. What factors determine restoration success of a salt marsh ten years after de-embankment?

    NARCIS (Netherlands)

    Chang, Esther R.; Veeneklaas, R.M.; Bakker, Jan P.; Daniels, Petra; Esselink, Peter

    Questions How successful was the restoration of a salt marsh at a former summer polder on the mainland coast of the Dutch Wadden Sea 10 yr after de-embankment? What were the most important factors determining the level of restoration success? Location Noard-Fryslân Bûtendyks, northwest Netherlands.

  1. Determination of free insulin-like growth factor-I in human serum

    DEFF Research Database (Denmark)

    Frystyk, J.; Skjærbæk, C.; Ivarsen, P.

    2001-01-01

    Two fundamentally different methods are currently used for the determination of free insulin-like growth factor-I (IGF-I): ultrafiltration by centrifugation (UF) and direct immunoradiometric assay (IRMA). The aim was to evaluate a commercial IRMA (DSL, Webster, TX, USA) and to compare it with UF....

  2. Prehospital factors determining regional variation in thrombolytic therapy in acute ischemic stroke

    NARCIS (Netherlands)

    Lahr, Maarten M.H.; Vroomen, P.C.A.J.; Luijckx, Gert-Jan; van der Zee, Durk-Jouke; de Vos, Ronald; Buskens, Erik

    2014-01-01

    Background Treatment rates with intravenous tissue plasminogen activator vary by region, which can be partially explained by organizational models of stroke care. A recent study demonstrated that prehospital factors determine a higher thrombolysis rate in a centralized vs. decentralized model in the

  3. Factors Determining the Career Success of Doctorate Holders: Evidence from the Spanish Case

    Science.gov (United States)

    Canal-Domínguez, J. F.; Wall, Alan

    2014-01-01

    This paper analyses the determining factors of PhDs' career success. Earnings have been used as an objective measure, and a subjective measure of success was constructed based on the individuals' assessments of broader aspects of their job position. When analysing the data by field of knowledge and gender, it was found that males and PhD holders…

  4. Modelling the Common Agricultural Policy with the Modular Agricultural GeNeral Equilibrium Tool (MAGNET). Effects of the 2014-2020 CAP financial agreement on welfare, trade, factor and product markets

    OpenAIRE

    BOULANGER PIERRE; PHILIPPIDIS GEORGE

    2013-01-01

    This JRC report presents methodological development of the Modular Applied GeNeral Equilibrium Tool (MAGNET), a global computable general equilibrium (CGE) model, for representing the Common Agricultural Policy (CAP). Using original data on European Union (EU) domestic support, it examines some likely macroeconomic effects of the expected CAP budget over the period 2014-2020. Results suggest that agreed budget cuts, in constant price, have limited impacts on EU and world markets, given the br...

  5. Method for determining correction factors induced by irradiation of ionization chamber cables in large radiation field

    International Nuclear Information System (INIS)

    Rodrigues, L.L.C.

    1988-01-01

    A simple method was developed to be suggested to hospital physicists in order to be followed during large radiation field dosimetry, to evaluate the effects of cables, connectors and extension cables irradiation and to determine correction factors for each system or geometry. All quality control tests were performed according to the International Electrotechnical Commission for three clinical dosimeters. Photon and electron irradiation effects for cables, connectors and extention cables were investigated under different experimental conditions by means of measurements of chamber sensitivity to a standard radiation source of 90 Sr. The radiation induced leakage current was also measured for cables, connectors and extension cables irradiated by photons and electrons. All measurements were performed at standard dosimetry conditions. Finally, measurements were performed in large fields. Cable factors and leakage factors were determined by the relation between chamber responses for irradiated and unirradiated cables. (author) [pt

  6. Factors determining access to oral health services among children aged less than 12 years in Peru.

    Science.gov (United States)

    Azañedo, Diego; Hernández-Vásquez, Akram; Casas-Bendezú, Mixsi; Gutiérrez, César; Agudelo-Suárez, Andrés A; Cortés, Sandra

    2017-01-01

    Background: Understanding problems of access to oral health services requires knowledge of factors that determine access. This study aimed to evaluate factors that determine access to oral health services among children aged Encuesta Demográfica y de Salud Familiar - ENDES). Children's access to oral health services within the previous 6 months was used as the dependent variable (i.e. Yes/No), and the Andersen and col model was used to select independent variables. Predisposing (e.g., language spoken by  tutor or guardian, wealth level, caregivers' educational level, area of residence, natural region of residence, age, and sex) and enabling factors (e.g. type of health insurance) were considered. Descriptive statistics were calculated, and multivariate analysis was performed using generalized linear models (Poisson family). Results: Of all the children, 51% were males, 56% were aged oral health services among children aged oral health services.

  7. Identifying apparent local stable isotope equilibrium in a complex non-equilibrium system.

    Science.gov (United States)

    He, Yuyang; Cao, Xiaobin; Wang, Jianwei; Bao, Huiming

    2018-02-28

    Although being out of equilibrium, biomolecules in organisms have the potential to approach isotope equilibrium locally because enzymatic reactions are intrinsically reversible. A rigorous approach that can describe isotope distribution among biomolecules and their apparent deviation from equilibrium state is lacking, however. Applying the concept of distance matrix in graph theory, we propose that apparent local isotope equilibrium among a subset of biomolecules can be assessed using an apparent fractionation difference (|Δα|) matrix, in which the differences between the observed isotope composition (δ') and the calculated equilibrium fractionation factor (1000lnβ) can be more rigorously evaluated than by using a previous approach for multiple biomolecules. We tested our |Δα| matrix approach by re-analyzing published data of different amino acids (AAs) in potato and in green alga. Our re-analysis shows that biosynthesis pathways could be the reason for an apparently close-to-equilibrium relationship inside AA families in potato leaves. Different biosynthesis/degradation pathways in tubers may have led to the observed isotope distribution difference between potato leaves and tubers. The analysis of data from green algae does not support the conclusion that AAs are further from equilibrium in glucose-cultured green algae than in the autotrophic ones. Application of the |Δα| matrix can help us to locate potential reversible reactions or reaction networks in a complex system such as a metabolic system. The same approach can be broadly applied to all complex systems that have multiple components, e.g. geochemical or atmospheric systems of early Earth or other planets. Copyright © 2017 John Wiley & Sons, Ltd.

  8. Non-equilibrium supramolecular polymerization.

    Science.gov (United States)

    Sorrenti, Alessandro; Leira-Iglesias, Jorge; Markvoort, Albert J; de Greef, Tom F A; Hermans, Thomas M

    2017-09-18

    Supramolecular polymerization has been traditionally focused on the thermodynamic equilibrium state, where one-dimensional assemblies reside at the global minimum of the Gibbs free energy. The pathway and rate to reach the equilibrium state are irrelevant, and the resulting assemblies remain unchanged over time. In the past decade, the focus has shifted to kinetically trapped (non-dissipative non-equilibrium) structures that heavily depend on the method of preparation (i.e., pathway complexity), and where the assembly rates are of key importance. Kinetic models have greatly improved our understanding of competing pathways, and shown how to steer supramolecular polymerization in the desired direction (i.e., pathway selection). The most recent innovation in the field relies on energy or mass input that is dissipated to keep the system away from the thermodynamic equilibrium (or from other non-dissipative states). This tutorial review aims to provide the reader with a set of tools to identify different types of self-assembled states that have been explored so far. In particular, we aim to clarify the often unclear use of the term "non-equilibrium self-assembly" by subdividing systems into dissipative, and non-dissipative non-equilibrium states. Examples are given for each of the states, with a focus on non-dissipative non-equilibrium states found in one-dimensional supramolecular polymerization.

  9. Spontaneity and Equilibrium: Why "?G Equilibrium" Are Incorrect

    Science.gov (United States)

    Raff, Lionel M.

    2014-01-01

    The fundamental criteria for chemical reactions to be spontaneous in a given direction are generally incorrectly stated as ?G equilibrium are also misstated as being ?G = 0 or ?A = 0. Following a brief review of the…

  10. TU-F-BRE-05: Experimental Determination of K Factor in Small Field Dosimetry

    International Nuclear Information System (INIS)

    Das, I; Akino, Y; Francescon, P

    2014-01-01

    Purpose: Small-field dosimetry is challenging due to charged-particle disequilibrium, source occlusion and more importantly finite size of detectors. IAEA/AAPM has published approach to convert detector readings to dose by k factor. Manufacturers have been trying to provide various types of micro-detectors that could be used in small fields. However k factors depends on detector perturbations and are derived using Monte Carlo simulation. PTW has introduced a microDiamond for small-field dosimetry. An experimental approach is presented to derive the k factor for this detector. Methods: PTW microDiamond is a small volume detector with 1.1 mm radius and 1.0 micron thick synthetic diamond. Output factors were measured from 1×1cm2 to 12×12 cm2 on a Varian machine at various depths using various micro-detectors with published k factors. Dose is calculated as reading * K. Assuming k factor is accurate, output factor should be identical with every micro-detectors. Hence published k values (Francescon et al Med Phys 35, 504-513,2008) were used to covert readings and then output factors were computed. Based on the converged curve from other detectors, k factor for microDiamond was computed versus field size. Results: Traditional output factors as ratio of readings normalized to 10×10 cm2 differ significantly for micro-detectors for fields smaller than 3×3 cm2 which are now being used extensively. When readings are converted to dose, the output factor is independent of detector. Based on this method, k factor for microDiamond was estimated to be nearly constant 0.993±0.007 over varied field sizes. Conclusion: Our method provides a unique opportunity to determine the k factor for any unknown detector. It is shown that even though k factor depends on machine type due to focal spot, however for fields ≥1×1 cm2 this method provides accurate evaluation of k factor. Additionally microDiamond could be used with assumption that k factor is nearly unity

  11. Real time equilibrium reconstruction for tokamak discharge control

    International Nuclear Information System (INIS)

    Ferron, J.R.; Walker, M.L.; Lao, L.L.; St John, H.E.; Humphreys, D.A.; Leuer, J.A.

    1998-01-01

    A practical method for performing a tokamak equilibrium reconstruction in real time for arbitrary time varying discharge shapes and current profiles is described. An approximate solution to the Grad-Shafranov equilibrium relation is found which best fits the diagnostic measurements. Thus, a solution for the spatial distribution of poloidal flux and toroidal current density is available in real time that is consistent with plasma force balance, allowing accurate evaluation of parameters such as discharge shape and safety factor profile. The equilibrium solutions are produced at a rate sufficient for discharge control. This equilibrium reconstruction algorithm has been implemented on the digital plasma control system for the DIII-D tokamak. The first application of real time equilibrium reconstruction to discharge shape control is described. (author)

  12. Study of PrP - I heterogeneous equilibrium

    International Nuclear Information System (INIS)

    Vasil'eva, I.G.; Mironov, K.E.; Tarasenko, A.D.

    1976-01-01

    Using static methods the authors have measured the equilibrium vapor pressure in the system PrP+I 2 at different temperatures and different initial iodine concentrations. The equilibrium reactions in the system have been determined. The reaction of PrP with iodine is irreversible. The content of PrI 3 and I 2 in the gas phase is negligible. The pressure in the system is determined by the partial pressure of phosphorus

  13. Determination of the influence factors of the radiopharmaceutical vials dimensions used for activimeter calibration at IPEN

    International Nuclear Information System (INIS)

    Martins, E.W.; Potiens, M.P.A.

    2012-01-01

    This paper presents the establishment of a quality control program and correction factors for the geometry of the vials used for distribution of radiopharmaceutical and activimeters calibration. The radiopharmaceutical produced by IPEN 67 Ga, 131 I, 201 Tl and 99m Tc had been tested using two different vials. Results show a maximum variation of 22% for 201 Tl, and the minimum variation was 2.98% for 131 I. The correction factors must be incorporated in the routine calibration of the activimeters. - Highlights: ► Establishement of quality control program for reference activimeters. ► Determination of correction factors for the geometry of vials. ► Radiopharmaceuticals tested for different vials were 67 Ga, 131 I, 201 Tl and 99m Tc. ► The maximum variation was 22% for 201 Tl and the minimum variation was 2.98% for 131 I. ► Correction factors must be incorporated in the calibration of the activimeters.

  14. Potency determination of factor VIII and factor IX for new product labelling and postinfusion testing: challenges for caregivers and regulators.

    Science.gov (United States)

    Dodt, J; Hubbard, A R; Wicks, S J; Gray, E; Neugebauer, B; Charton, E; Silvester, G

    2015-07-01

    A workshop organized by the European Medicines Agency and the European Directorate for the Quality of Medicines and HealthCare was held in London, UK on November 28-29, 2013, to provide an overview of the current knowledge of the characterization of new factor VIII (FVIII) and factor IX (FIX) concentrates with respect to potency assays and testing of postinfusion material. The objective was to set the basis for regulatory authorities' discussion on the most appropriate potency assay for the individual products, and European Pharmacopoeia (Ph. Eur.) discussion on whether to propose revision of the Ph. Eur. monographs with respect to potency assays in the light of information on new FVIII and FIX concentrates. The workshop showed that for all products valid assays vs. the international concentrate standards were obtained and potency could be expressed in International Units. The Ph. Eur. chromogenic potency assay gave valid assay results which correlate with in vivo functionality of rFVIII products. For some modified rFVIII products and all modified rFIX products, one-stage clotting assay methods result in different potencies depending on the activated partial thromboplastin time reagent. As a consequence, monitoring of patients' postinfusion levels is challenging but it was pointed out that manufacturers are responsible for providing the users with appropriate information for use and laboratory testing of their product. Strategies to avoid misleading determination of patents' plasma levels, e.g. information on suitable assays, laboratory standards or correction factors were discussed. © 2015 John Wiley & Sons Ltd.

  15. RINGED ACCRETION DISKS: EQUILIBRIUM CONFIGURATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Pugliese, D.; Stuchlík, Z., E-mail: d.pugliese.physics@gmail.com, E-mail: zdenek.stuchlik@physics.cz [Institute of Physics and Research Centre of Theoretical Physics and Astrophysics, Faculty of Philosophy and Science, Silesian University in Opava, Bezručovo náměstí 13, CZ-74601 Opava (Czech Republic)

    2015-12-15

    We investigate a model of a ringed accretion disk, made up by several rings rotating around a supermassive Kerr black hole attractor. Each toroid of the ringed disk is governed by the general relativity hydrodynamic Boyer condition of equilibrium configurations of rotating perfect fluids. Properties of the tori can then be determined by an appropriately defined effective potential reflecting the background Kerr geometry and the centrifugal effects. The ringed disks could be created in various regimes during the evolution of matter configurations around supermassive black holes. Therefore, both corotating and counterrotating rings have to be considered as being a constituent of the ringed disk. We provide constraints on the model parameters for the existence and stability of various ringed configurations and discuss occurrence of accretion onto the Kerr black hole and possible launching of jets from the ringed disk. We demonstrate that various ringed disks can be characterized by a maximum number of rings. We present also a perturbation analysis based on evolution of the oscillating components of the ringed disk. The dynamics of the unstable phases of the ringed disk evolution seems to be promising in relation to high-energy phenomena demonstrated in active galactic nuclei.

  16. Performance related factors are the main determinants of the von Willebrand factor response to exhaustive physical exercise.

    Directory of Open Access Journals (Sweden)

    Janine E van Loon

    Full Text Available Physical stress triggers the endothelium to release von Willebrand Factor (VWF from the Weibel Palade bodies. Since VWF is a risk factor for arterial thrombosis, it is of great interest to discover determinants of VWF response to physical stress. We aimed to determine the main mediators of the VWF increase by exhaustive physical exercise.105 healthy individuals (18-35 years were included in this study. Each participant performed an incremental exhaustive exercise test on a cycle ergometer. Respiratory gas exchange measurements were obtained while cardiac function was continuously monitored. Blood was collected at baseline and directly after exhaustion. VWF antigen (VWF:Ag levels, VWF collagen binding (VWF:CB levels, ADAMTS13 activity and common variations in Syntaxin Binding Protein-5 (STXBP5, rs1039084 and rs9399599, Syntaxin-2 (STX2, rs7978987 and VWF (promoter, rs7965413 were determined.The median VWF:Ag level at baseline was 0.94 IU/mL [IQR 0.8-1.1] and increased with 47% [IQR 25-73] after exhaustive exercise to a median maximum VWF:Ag of 1.38 IU/mL [IQR 1.1-1.8] (p<0.0001. VWF:CB levels and ADAMTS13 activity both also increased after exhaustive exercise (median increase 43% and 12%, both p<0.0001. The strongest determinants of the VWF:Ag level increase are performance related (p<0.0001. We observed a gender difference in VWF:Ag response to exercise (females 1.2 IU/mL; males 1.7 IU/mL, p = 0.001, which was associated by a difference in performance. Genetic variations in STXBP5, STX2 and the VWF promoter were not associated with VWF:Ag levels at baseline nor with the VWF:Ag increase.VWF:Ag levels strongly increase upon exhaustive exercise and this increase is strongly determined by physical fitness level and the intensity of the exercise, while there is no clear effect of genetic variation in STXBP5, STX2 and the VWF promoter.

  17. Economic planning and equilibrium growth of human resources and capital in health-care sector: Case study of Iran.

    Science.gov (United States)

    Mahboobi-Ardakan, Payman; Kazemian, Mahmood; Mehraban, Sattar

    2017-01-01

    During different planning periods, human resources factor has been considerably increased in the health-care sector. The main goal is to determine economic planning conditions and equilibrium growth for services level and specialized workforce resources in health-care sector and also to determine the gap between levels of health-care services and specialized workforce resources in the equilibrium growth conditions and their available levels during the periods of the first to fourth development plansin Iran. In the study after data collection, econometric methods and EViews version 8.0 were used for data processing. The used model was based on neoclassical economic growth model. The results indicated that during the former planning periods, although specialized workforce has been increased significantly in health-care sector, lack of attention to equilibrium growth conditions caused imbalance conditions for product level and specialized workforce in health-care sector. In the past development plans for health services, equilibrium conditions based on the full employment in the capital stock, and specialized labor are not considered. The government could act by choosing policies determined by the growth model to achieve equilibrium level in the field of human resources and services during the next planning periods.

  18. Economic planning and equilibrium growth of human resources and capital in health-care sector: Case study of Iran

    Science.gov (United States)

    Mahboobi-Ardakan, Payman; Kazemian, Mahmood; Mehraban, Sattar

    2017-01-01

    CONTEXT: During different planning periods, human resources factor has been considerably increased in the health-care sector. AIMS: The main goal is to determine economic planning conditions and equilibrium growth for services level and specialized workforce resources in health-care sector and also to determine the gap between levels of health-care services and specialized workforce resources in the equilibrium growth conditions and their available levels during the periods of the first to fourth development plansin Iran. MATERIALS AND METHODS: In the study after data collection, econometric methods and EViews version 8.0 were used for data processing. The used model was based on neoclassical economic growth model. RESULTS: The results indicated that during the former planning periods, although specialized workforce has been increased significantly in health-care sector, lack of attention to equilibrium growth conditions caused imbalance conditions for product level and specialized workforce in health-care sector. CONCLUSIONS: In the past development plans for health services, equilibrium conditions based on the full employment in the capital stock, and specialized labor are not considered. The government could act by choosing policies determined by the growth model to achieve equilibrium level in the field of human resources and services during the next planning periods. PMID:28616419

  19. Determining e-learning success factor in higher education based on user perspective using Fuzzy AHP

    Directory of Open Access Journals (Sweden)

    Anggrainingsih Rini

    2018-01-01

    Full Text Available Recently almost all universities in the world have implemented E-learning to support their academic system. Previous studies have been conducted to determine CSF using Analytic Hierarchy Process (AHP method. However, AHP method cannot handle the uncertainty and vagueness of the human’s opinion, so then it causes less appropriate decision. Some researcher has proposed to use fuzzy sets theory with AHP to increase the ability of AHP to deal problem regarding the uncertainty/fuzziness. This study aims to determine ranks of priorities of the multiple factors which influence the E-learning success using FAHP method. The respondents consist of ten e-learning’s experts, 305 lecturers, and 4195 students at Sebelas Maret University. The result describes similar success factors ranking between both experienced and non-experienced user (lecturer and student. Then, the result shows that there are five most influencial success factors of e-learning at Sebelas Maret University based on the lectures perspective Financial Policy, Regulatory Policy, Course quality, Relevant Content and Technical Support. On the other hand, according to the student's point of view five most e-learning, critical success factors are Quality of Course, Relevant of Content, Completeness of Content, Attitudes toward Student, and Flexibility in taking Course. Therefore, this finding can be used by E-learning management of Sebelas Maret University to deteremine a strategy to to achieve successful implementation of e-learning at Sebelas Maret University with consider these factors.

  20. LOSS FACTOR AND DYNAMIC YOUNG MODULUS DETERMINATION FOR COMPOSITE SANDWICH BARS REINFORCED WITH STEEL FABRIC

    Directory of Open Access Journals (Sweden)

    Cosmin-Mihai MIRIŢOIU

    2015-05-01

    Full Text Available In this paper I have build some composite sandwich bars. For these bars I have determined the dynamic response by recording their free vibrations. These bars have the core made of polypropylene honeycomb with upper and lower layers reinforced with steel wire mesh. For these bars I have determined the the eigenfrequency of the first eigenmode in this way: the bar was embedded at one end and free at the other where there was placed an accelerometer at 10 mm distance from the edge and I applied an initial force at the free end. I have determined the eigenfrequency because I will use its values for the loss factor and dynamic Young modulus determination.

  1. Determination of Radium transfer factor from soil to vegetables by Gamma spectrometry in high levels of natural radiation areas of Ramsar

    International Nuclear Information System (INIS)

    Reza-nejad, F.

    2000-01-01

    One of the most important and prevalent radioactive contaminants in the environment is radium-226 from uranium-238 decay series. This radionuclide after entering in to the food chain, especially through consumed drinking water and vegetables is transferred to man. In order to determine the transfer factor of 226 Ra from soil to veg tables and to assess the effective dose due to ingestion of vegetables by the critical group of Talesh-Mahaleh which is one of the high levels natural radiation areas of Ramsar, more than 90 samples of soil, seed and vegetable were collected and analysed by gamma spectrometry using a High Purity Germanium detector coupled to a Canberra Mca-series 100. The concentrations of 226 Ra were determined by 609 KeV photopeak of bismuth-214 in secular equilibrium with 226 Ra. Concentrations of 226 Ra in dried soil samples were ranged from a minimum of 733 ± 25 to a maximum of 45100 ± 37 Bq Kg -1 . The maximum and minimum transfer factor of 226 Ra were determined in leafy and root vegetables respectively. The average transfer factor of 226 RA were calculated 1.2 * 10 -2 for all 14 kind of vegetables. The results indicated that by increasing the 226 Ra concentration in substrate, the uptake of this radionuclide has exponentially increased while, the transfer factors were decreased. Also there is a positive correlation between uptake of 226 Ra and Ca in vegetable. The highest and lowest ratio of 226 Ra/Ca were measured 127.8 Bq Kg -1 and 8 Bq Kg -1 and 8 Bq Kg -1 in carrot and tomato samples respectively. The effective dose resulting from 226 Ra due to consumption of vegetables for critical group was 51.6 μ Sv a -1 which is 13 times more than average of effective dose resulting from this radionuclide due to intake of all kind of foods and water in background region

  2. Numerical Verification Of Equilibrium Chemistry

    International Nuclear Information System (INIS)

    Piro, Markus; Lewis, Brent; Thompson, William T.; Simunovic, Srdjan; Besmann, Theodore M.

    2010-01-01

    A numerical tool is in an advanced state of development to compute the equilibrium compositions of phases and their proportions in multi-component systems of importance to the nuclear industry. The resulting software is being conceived for direct integration into large multi-physics fuel performance codes, particularly for providing boundary conditions in heat and mass transport modules. However, any numerical errors produced in equilibrium chemistry computations will be propagated in subsequent heat and mass transport calculations, thus falsely predicting nuclear fuel behaviour. The necessity for a reliable method to numerically verify chemical equilibrium computations is emphasized by the requirement to handle the very large number of elements necessary to capture the entire fission product inventory. A simple, reliable and comprehensive numerical verification method is presented which can be invoked by any equilibrium chemistry solver for quality assurance purposes.

  3. On the local equilibrium condition

    International Nuclear Information System (INIS)

    Hessling, H.

    1994-11-01

    A physical system is in local equilibrium if it cannot be distinguished from a global equilibrium by ''infinitesimally localized measurements''. This should be a natural characterization of local equilibrium, but the problem is to give a precise meaning to the qualitative phrase ''infinitesimally localized measurements''. A solution is suggested in form of a Local Equilibrium Condition (LEC), which can be applied to linear relativistic quantum field theories but not directly to selfinteracting quantum fields. The concept of local temperature resulting from LEC is compared to an old approach to local temperature based on the principle of maximal entropy. It is shown that the principle of maximal entropy does not always lead to physical states if it is applied to relativistic quantum field theories. (orig.)

  4. Determination of conversion factors and efficiency for GM detectors used in measurements of surface pollution

    International Nuclear Information System (INIS)

    Ayala G, J.; Alvarez R, J.T.

    1999-01-01

    One of the objectives of the Radiation protection, is to observe with the National and as International standardization referring to the ICRP dose limitation system (ICRP 26, ICRP 60). In this work it was treated the problem corresponding about how to determine the conversion factor of cpm/mR/h and the absolute efficiency ε, for a Geiger-Muller equipment with thin window. This equipment is used for the beta particle detection. Thus the correct use of calibration factors and the procedures to convert cpm in Bq is expedited and also to apply the ISO procedure for to evaluate contaminated surfaces. (Author)

  5. Determination of the usage factor of components after cyclic loading using high-resolution microstructural investigations

    International Nuclear Information System (INIS)

    Seibold, A.; Scheibe, A.; Assmann, H.D.

    1989-01-01

    The usage factor can be derived from the quantification of the structure changes and the allocation of the microstructural state to the fatigue curves of the component materials. Using the example of the low alloy fine grain structural steel 20 Mn Mo Ni 5 5 (annealed structure), the relationship between micro-structure and the number of load cycles is shown in the form of a calibration curve. By high resolution structural investigation, the usage factor can be determined to n = N/N B ≅ 0.5 under given vibration stress. Only a small volume sample is required for the electron microscope examination. (orig./DG) [de

  6. Fluorophotometric determination of uranium: an automated sintering furnace and factors affecting precision

    International Nuclear Information System (INIS)

    Strain, J.E.

    1978-07-01

    The fusion furnace consists of four individually controlled, slotted-tube furnaces that automatically dry, sinter and anneal the fluoride or carbonate pellet used in the fluorometric determination of uranium. The furnace operates in air and prepares approximately 90 pellets per hour for fluorometric measurement. The factors that were thought to affect the precision of the method were investigated. The two factors that seem to be the most influential are (1) the manner in which the sample is loaded onto the pellet; and (2) the surface characteristics of the platinum dish in which the pellet is sintered and measured fluorometrically

  7. Integral emission factors for methane determined using urban flux measurements and local-scale inverse models

    Science.gov (United States)

    Christen, Andreas; Johnson, Mark; Molodovskaya, Marina; Ketler, Rick; Nesic, Zoran; Crawford, Ben; Giometto, Marco; van der Laan, Mike

    2013-04-01

    The most important long-lived greenhouse gas (LLGHG) emitted during combustion of fuels is carbon dioxide (CO2), however also traces of the LLGHGs methane (CH4) and nitrous oxide (N2O) are released, the quantities of which depend largely on the conditions of the combustion process. Emission factors determine the mass of LLGHGs emitted per energy used (or kilometre driven for cars) and are key inputs for bottom-up emission modelling. Emission factors for CH4 are typically determined in the laboratory or on a test stand for a given combustion system using a small number of samples (vehicles, furnaces), yet associated with larger uncertainties when scaled to entire fleets. We propose an alternative, different approach - Can integrated emission factors be independently determined using direct micrometeorological flux measurements over an urban surface? If so, do emission factors determined from flux measurements (top-down) agree with up-scaled emission factors of relevant combustion systems (heating, vehicles) in the source area of the flux measurement? Direct flux measurements of CH4 were carried out between February and May, 2012 over a relatively densely populated, urban surface in Vancouver, Canada by means of eddy covariance (EC). The EC-system consisted of an ultrasonic anemometer (CSAT-3, Campbell Scientific Inc.) and two open-path infrared gas analyzers (Li7500 and Li7700, Licor Inc.) on a tower at 30m above the surface. The source area of the EC system is characterised by a relative homogeneous morphometry (5.3m average building height), but spatially and temporally varying emission sources, including two major intersecting arterial roads (70.000 cars drive through the 50% source area per day) and seasonal heating in predominantly single-family houses (natural gas). An inverse dispersion model (turbulent source area model), validated against large eddy simulations (LES) of the urban roughness sublayer, allows the determination of the spatial area that

  8. A Strategic-Equilibrium Based

    Directory of Open Access Journals (Sweden)

    Gabriel J. Turbay

    2011-03-01

    Full Text Available The strategic equilibrium of an N-person cooperative game with transferable utility is a system composed of a cover collection of subsets of N and a set of extended imputations attainable through such equilibrium cover. The system describes a state of coalitional bargaining stability where every player has a bargaining alternative against any other player to support his corresponding equilibrium claim. Any coalition in the sable system may form and divide the characteristic value function of the coalition as prescribed by the equilibrium payoffs. If syndicates are allowed to form, a formed coalition may become a syndicate using the equilibrium payoffs as disagreement values in bargaining for a part of the complementary coalition incremental value to the grand coalition when formed. The emergent well known-constant sum derived game in partition function is described in terms of parameters that result from incumbent binding agreements. The strategic-equilibrium corresponding to the derived game gives an equal value claim to all players.  This surprising result is alternatively explained in terms of strategic-equilibrium based possible outcomes by a sequence of bargaining stages that when the binding agreements are in the right sequential order, von Neumann and Morgenstern (vN-M non-discriminatory solutions emerge. In these solutions a preferred branch by a sufficient number of players is identified: the weaker players syndicate against the stronger player. This condition is referred to as the stronger player paradox.  A strategic alternative available to the stronger players to overcome the anticipated not desirable results is to voluntarily lower his bargaining equilibrium claim. In doing the original strategic equilibrium is modified and vN-M discriminatory solutions may occur, but also a different stronger player may emerge that has eventually will have to lower his equilibrium claim. A sequence of such measures converges to the equal

  9. Thermodynamic evolution far from equilibrium

    Science.gov (United States)

    Khantuleva, Tatiana A.

    2018-05-01

    The presented model of thermodynamic evolution of an open system far from equilibrium is based on the modern results of nonequilibrium statistical mechanics, the nonlocal theory of nonequilibrium transport developed by the author and the Speed Gradient principle introduced in the theory of adaptive control. Transition to a description of the system internal structure evolution at the mesoscopic level allows a new insight at the stability problem of non-equilibrium processes. The new model is used in a number of specific tasks.

  10. The determination of beam quality correction factors: Monte Carlo simulations and measurements.

    Science.gov (United States)

    González-Castaño, D M; Hartmann, G H; Sánchez-Doblado, F; Gómez, F; Kapsch, R-P; Pena, J; Capote, R

    2009-08-07

    Modern dosimetry protocols are based on the use of ionization chambers provided with a calibration factor in terms of absorbed dose to water. The basic formula to determine the absorbed dose at a user's beam contains the well-known beam quality correction factor that is required whenever the quality of radiation used at calibration differs from that of the user's radiation. The dosimetry protocols describe the whole ionization chamber calibration procedure and include tabulated beam quality correction factors which refer to 60Co gamma radiation used as calibration quality. They have been calculated for a series of ionization chambers and radiation qualities based on formulae, which are also described in the protocols. In the case of high-energy photon beams, the relative standard uncertainty of the beam quality correction factor is estimated to amount to 1%. In the present work, two alternative methods to determine beam quality correction factors are prescribed-Monte Carlo simulation using the EGSnrc system and an experimental method based on a comparison with a reference chamber. Both Monte Carlo calculations and ratio measurements were carried out for nine chambers at several radiation beams. Four chamber types are not included in the current dosimetry protocols. Beam quality corrections for the reference chamber at two beam qualities were also measured using a calorimeter at a PTB Primary Standards Dosimetry Laboratory. Good agreement between the Monte Carlo calculated (1% uncertainty) and measured (0.5% uncertainty) beam quality correction factors was obtained. Based on these results we propose that beam quality correction factors can be generated both by measurements and by the Monte Carlo simulations with an uncertainty at least comparable to that given in current dosimetry protocols.

  11. Behavioral determinants of cardiovascular diseases risk factors: A qualitative directed content analysis.

    Science.gov (United States)

    Sabzmakan, Leila; Morowatisharifabad, Mohammad Ali; Mohammadi, Eesa; Mazloomy-Mahmoodabad, Seid Saied; Rabiei, Katayoun; Naseri, Mohammad Hassan; Shakibazadeh, Elham; Mirzaei, Masoud

    2014-03-01

    The PRECEDE model is a useful tool for planers to assess health problems, the behavioral and environmental causes of the problems, and their determinants. This study aims to understand the experiences of patients and health care providers about the behavioral causes of cardiovascular diseases (CVDs) risk factors and their determinants. This qualitative study utilized content analysis approach based on the PRECEDE model. The study was conducted for over 6 months in 2012 at the diabetes units of health centers associated with Alborz University of Medical Sciences, which is located in Karaj, Iran. Data were collected using individual semi-structured interviews with 50 patients and 12 health care providers. Data analysis was performed simultaneously with data collection using the content analysis directed method. Stress, unhealthy eating, and physical inactivity were the behaviors, which predict the risk factors for CVD. Most of the patients considered stress as the most important underlying cause of their illness. In this study, 110 of the primary codes were categorized into seven subcategories, including knowledge, attitude, perceived susceptibility, severity, perceived benefits, barriers, and self-efficacy, which were located in the predisposing category of the PRECEDE model. Among these determinants, perceived barriers and self-efficacy for the mentioned behaviors seemed to be of great importance. Identifying behavioral determinants will help the planners design future programs and select the most appropriate methods and applications to address these determinants in order to reduce risky behaviors.

  12. Non-equilibrium spectroscopy of high-Tc superconductors

    International Nuclear Information System (INIS)

    Krasnov, V M

    2009-01-01

    In superconductors, recombination of two non-equilibrium quasiparticles into a Cooper pair results in emission of excitation that mediates superconductivity. This is the basis of the proposed new type of 'non-equilibrium' spectroscopy of high T c superconductors, which may open a possibility for direct and unambiguous determination of the coupling mechanism of high T c superconductivity. In case of low T c superconductors, the feasibility of such the non-equilibrium spectroscopy was demonstrated in classical phonon generation-detection experiments almost four decades ago. Recently it was demonstrated that a similar technique can be used for high T c superconductors, using natural intrinsic Josephson junctions both for injection of non-equilibrium quasiparticles and for detection of the non-equilibrium radiation. Here I analyze theoretically non-equilibrium phenomena in intrinsic Josephson junctions. It is shown that extreme non-equilibrium state can be achieved at bias equal to integer number of the gap voltage, which can lead to laser-like emission from the stack. I argue that identification of the boson type, constituting this non-equilibrium radiation would unambiguously reveal the coupling mechanism of high Tc superconductors.

  13. Wastewater Management Efficiency and Determinant Factors in the Chinese Industrial Sector from 2004 to 2014

    Directory of Open Access Journals (Sweden)

    Hidemichi Fujii

    2017-08-01

    Full Text Available This study analyzes industrial wastewater management efficiency using a Chinese provincial dataset from 2004 to 2014. The weighted Russell directional distance model is used to evaluate the efficiency of management practices. Determinants analysis was conducted based on governmental policy, pollution abatement, and market factors to identify the main drivers of industrial wastewater management efficiency in China. The results indicate that the wastewater management efficiency improved in the eastern and central regions. However, there is a significant efficiency gap between provinces in the western region. Moreover, the main determinants of wastewater management efficiency differ among regions and pollutants.

  14. Relevance of equilibrium in multifragmentation

    International Nuclear Information System (INIS)

    Furuta, Takuya; Ono, Akira

    2009-01-01

    The relevance of equilibrium in a multifragmentation reaction of very central 40 Ca + 40 Ca collisions at 35 MeV/nucleon is investigated by using simulations of antisymmetrized molecular dynamics (AMD). Two types of ensembles are compared. One is the reaction ensemble of the states at each reaction time t in collision events simulated by AMD, and the other is the equilibrium ensemble prepared by solving the AMD equation of motion for a many-nucleon system confined in a container for a long time. The comparison of the ensembles is performed for the fragment charge distribution and the excitation energies. Our calculations show that there exists an equilibrium ensemble that well reproduces the reaction ensemble at each reaction time t for the investigated period 80≤t≤300 fm/c. However, there are some other observables that show discrepancies between the reaction and equilibrium ensembles. These may be interpreted as dynamical effects in the reaction. The usual static equilibrium at each instant is not realized since any equilibrium ensemble with the same volume as that of the reaction system cannot reproduce the fragment observables

  15. Equilibrium plasma corona surfaces

    International Nuclear Information System (INIS)

    Ensley, D.L.

    1979-07-01

    The distribution of charge of one sign when the opposite charge density is given is determined. Poisson's equation is solved in plane geometry for a simple specified ion density. This automatically gives the inverse solution for a given electron density, by reversing the sign of the potential. Some solutions can approximate a microwave confined corona, for very over dense cases

  16. Determination of the separation factor of uranium isotopes by gaseous diffusion; Determination des facteurs de separation des isotopes de l'uranium par diffusion gazeuse

    Energy Technology Data Exchange (ETDEWEB)

    Bilous, O; Counas, G [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    A 12-stage pilot separation cascade with a low output has been constructed to measure the separation factor of uranium isotopes by gaseous diffusion. The report describes some of the separation results obtained, and also provides information on the time necessary for equilibrium to be established and on the influence of various perturbations on the pressure profile in the cascade. (author) [French] Une cascade pilote de 12 etages de separation a faible debit a ete construite pour mesurer le facteur de separation des isotopes de l'uranium par diffusion gazeuse. Le rapport decrit certains des resultats de separation obtenus et fournit egalement des donnees sur les temps de mise en equilibre et l'influence de diverses perturbations sur le profil des pressions dans la cascade. (auteur)

  17. [Sociocultural factors determinants of eating habits of kindergarten schoolchildren in Peru].

    Science.gov (United States)

    González-Jiménez, Rocío; León-Larios, Fátima; Lomas-Campos, Mercedes; Albar, María-Jesús

    2016-01-01

    To examine the sociocultural factors that determine the eating habits of children aged less than 5 years who attend kindergarten school in Chachapoyas in Peru, we carried out a qualitative study by means of semi-structured interviews of 18 fathers and mothers. The key factors related to eating habits were as follows: availability and easiness to prepare foods, schedule and work done by parents, intake of coffee in children as a common practice, lack of resources and economic uncertainty for food planning, and the lack of nutritional knowledge. Similarly, beliefs that might explain some eating habits, such as the beneficial effects of eating food as a family, maternal breastfeeding, and others, or the role of nutrition for the appropriate intellectual and physical development of children were identified. Our results provide evidence about the ways parents tackle and understand their children's nutrition while, in turn, determining its quality.

  18. Determinants of vegetation distribution at continental scale. The contribution of natural and anthropogenic factors

    DEFF Research Database (Denmark)

    Greve, Michelle; Svenning, J.-C.; Lykke, Anne Mette

    2011-01-01

    It has long been debated what determines distribution of vegetation types, though this has rarely been tested at continental scale. We thus aimed to determine which vegetation types are most accurately predicted by natural environmental factors, and which of these factors best predict current veg...... was also assessed, and found to be of some importance for most vegetation types. We conclude that, in addition to including environmental variables in predicting vegetation distribution, it is essential that human impact be considered, also in future climate change scenarios....... vegetation distribution across Africa. Vegetation types were extracted from the Global Land Cover Map for the year 2000, and the distribution of vegetation types modelled in terms of climate, soil and topography. Annual precipitation was the best predictor of the distribution of all vegetation types...

  19. Experimental model for neutron scattering in disordered systems: static structure factor determination of mode-softening

    International Nuclear Information System (INIS)

    Siegel, E.

    1982-01-01

    The generalized-disorder collective-boson mode-softening universality-principle (GDCBMSUP) for collective-boson mode dispersion in disordered systems (liquids, quantum liquids, glasses, powders, disordered magnets, plasmas...), a unified qualitative and semi-qualitative and semi-quantitative descriptive prescription for treating the properties of very differently disordered systems, is directly dependent upon a measurement (or calculation) of the static structure factor S(k) determined from a frequency average of the dynamic structure factor S(k,w), a multiple of the inelastic differential neutron scattering cross section d 2 sigma/dwdOMEGA. The prescription for this principle is given and, because of its universal applicability to disordered systems of any type with any type and/or degree of disorder, the neutron scattering determination of S(k) takes on renewed importance

  20. Determinants of job stress in chemical process industry: A factor analysis approach.

    Science.gov (United States)

    Menon, Balagopal G; Praveensal, C J; Madhu, G

    2015-01-01

    Job stress is one of the active research domains in industrial safety research. The job stress can result in accidents and health related issues in workers in chemical process industries. Hence it is important to measure the level of job stress in workers so as to mitigate the same to avoid the worker's safety related problems in the industries. The objective of this study is to determine the job stress factors in the chemical process industry in Kerala state, India. This study also aims to propose a comprehensive model and an instrument framework for measuring job stress levels in the chemical process industries in Kerala, India. The data is collected through a questionnaire survey conducted in chemical process industries in Kerala. The collected data out of 1197 surveys is subjected to principal component and confirmatory factor analysis to develop the job stress factor structure. The factor analysis revealed 8 factors that influence the job stress in process industries. It is also found that the job stress in employees is most influenced by role ambiguity and the least by work environment. The study has developed an instrument framework towards measuring job stress utilizing exploratory factor analysis and structural equation modeling.

  1. Factors determining English test score of high school students in rural Nepal

    OpenAIRE

    NEUPANE, Pramila; THAPA, Rajesh Bahadur; SAPKOTA, Jeet Bahadur

    2017-01-01

    Due to globalization and internationalization of education, the importance of English language has been growing consistently. Like many other countries around the globe, English is taught as a compulsory subject from the primary level in Nepal. Despite continuous public and private efforts, achievement in English education is not satisfactory, especially in rural areas, due to numerous socio-cultural and other factors. Thus, this article explores some important determinants of English achieve...

  2. Suicidal Ideation, Attempt, and Determining Factors among HIV/AIDS Patients, Ethiopia

    OpenAIRE

    Bitew, Huluagresh; Andargie, Gashaw; Tadesse, Agitu; Belete, Amsalu; Fekadu, Wubalem; Mekonen, Tesfa

    2016-01-01

    Background. Suicide is a serious cause of mortality worldwide and is considered as a psychiatric emergency. Suicide is more frequent in peoples living with HIV/AIDS than in general population. Objective. To assess the proportion and determining factors of suicidal ideation and attempt among peoples living with HIV/AIDS in Ethiopia. Methods. Institutional based cross-sectional study was conducted from May to June 2015 by selecting 393 participants using systematic random sampling technique. Su...

  3. INNOVATION POTENTIAL AS A DETERMINING FACTOR IN THE GROWTH OF COMPETITIVE ADVANTAGES BUILDING PRODUCTS

    OpenAIRE

    T. U. Levitsky; A. M. Esetova

    2014-01-01

    It is stipulated that the construction company, chosen the strategy of economic growth, should have some competitive advantages, determining opportunities for sustainable development and effective improving, and operational efficiency increase. One of the factors of the competitiveness increase of construction products is the innovative potential of construction industry. Methodical approaches to the evaluation of innovative capacity and its effect on the growth of competitive advantages have...

  4. INNOVATION POTENTIAL AS A DETERMINING FACTOR IN THE GROWTH OF COMPETITIVE ADVANTAGES BUILDING PRODUCTS

    Directory of Open Access Journals (Sweden)

    T. U. Levitsky

    2014-01-01

    Full Text Available It is stipulated that the construction company, chosen the strategy of economic growth, should have some competitive advantages, determining opportunities for sustainable development and effective improving, and operational efficiency increase. One of the factors of the competitiveness increase of construction products is the innovative potential of construction industry. Methodical approaches to the evaluation of innovative capacity and its effect on the growth of competitive advantages have been proposed. 

  5. Determining Factors for Delisting of Companies Listed on BM&FBOVESPA

    Directory of Open Access Journals (Sweden)

    Patricia Maria Bortolon

    2015-08-01

    Full Text Available Traditionally, the capital market has attracted the interest of scholars and researchers, motivated to understand the process of going public and trading securities of companies on a stock exchange. In this research context, an aspect had been neglected, something which indi cates a gap in the body of knowledge about the capital market and corporate governance: delisting of companies. We aim to identify the determining factors for delisting companies from the Commodity & Futures Exchange BOVESPA (BM&FBOVESPA. Methodologically, this research has related a set of variables collected from secondary data available on the database of the Securities Commission of Brazil (CVM, BM&FBOVESPA, and Economatica. By analyzing 227 listing cancellations, between 2001 and 2012, the results indicate that de listing of companies from BM&FBOVESPA is determined by the following factors: (i greater concentration of ownership and control; (ii lower free float; (iii lower liquidity of shares; (iv greater availability of cash; and (v larger size. The fact that the controlling shareholder is a public or private company determines significant differences in the decision to delist. While in the first case cash availability is the most important factor, in the second liquidity is the main determining factor for delisting. From the academic viewpoint, this research extends the studies on delisting, still incipient in the Brazilian capital market context. For the capital market, identifying the characteristics of companies prone to cancel listing may prevent investors concerned about inherent risks at the time of acquiring shares by the controlling group interested in delisting.

  6. Determination of velocity correction factors for real-time air velocity monitoring in underground mines

    OpenAIRE

    Zhou, Lihong; Yuan, Liming; Thomas, Rick; Iannacchione, Anthony

    2017-01-01

    When there are installations of air velocity sensors in the mining industry for real-time airflow monitoring, a problem exists with how the monitored air velocity at a fixed location corresponds to the average air velocity, which is used to determine the volume flow rate of air in an entry with the cross-sectional area. Correction factors have been practically employed to convert a measured centerline air velocity to the average air velocity. However, studies on the recommended correction fac...

  7. DETERMINATION OF MOST SIGNIFICANT FACTORS FOR ANALYSIS OF HIGHWAY OPERATING CONDITIONS

    Directory of Open Access Journals (Sweden)

    M. G. Solodkaya

    2017-01-01

    Full Text Available Traffic circulation on highways is a random process. Therefore automotive damage rate and, respectively, roads on which they are moving is subjected to regularities of random processes. Dynamic processes of vehicle-road interaction are determined to various extents by a host of factors that include road pavement evenness and characteristics of moving vehicles. For this reason the following task has been set: to reveal the most significant factors and mathematically correlate values of vehicle dynamic loads with a quality of road pavement and vehicle speed. Such task statement has not been solved adequately and this situation determines importance and novelty of the investigations in the given direction. While solving the mentioned task the investigations which have been carried out under real-life conditions and with the help of real-life objects are considered as the most reliable ones. However, preparation and execution of such experiments as needed significantly complicates their implementation. In this regard it looks rather expediential to combine a factorial experiment with the tests of a checked model while using ECM with stage-by-stage parameter fixation of working processes passing in “vehicle-road” system, comprehensive assessment pertaining to influence of the selected factors and selection of their optimum combination. Mathematical dependence has been obtained to evaluate influence of several external factors on optimization of vehicle dynamic load on the road. This component makes it possible to attain a simplified and adequate description of element interaction in “vehicle – road” system. While investigating influence of pavement irregularities on maximum dynamic loads on the road influence rate of the selected factors is determined in the following sequence: vehicle weight, pavement evenness and speed of transport facility.

  8. Equilibrium Partitioning Sediment Benchmarks (ESBs) for the ...

    Science.gov (United States)

    This document describes procedures to determine the concentrations of nonionic organic chemicals in sediment interstitial waters. In previous ESB documents, the general equilibrium partitioning (EqP) approach was chosen for the derivation of sediment benchmarks because it accounts for the varying bioavailability of chemicals in different sediments and allows for the incorporation of the appropriate biological effects concentration. This provides for the derivation of benchmarks that are causally linked to the specific chemical, applicable across sediments, and appropriately protective of benthic organisms.  This equilibrium partitioning sediment benchmark (ESB) document was prepared by scientists from the Atlantic Ecology Division, Mid-Continent Ecology Division, and Western Ecology Division, the Office of Water, and private consultants. The document describes procedures to determine the interstitial water concentrations of nonionic organic chemicals in contaminated sediments. Based on these concentrations, guidance is provided on the derivation of toxic units to assess whether the sediments are likely to cause adverse effects to benthic organisms. The equilibrium partitioning (EqP) approach was chosen because it is based on the concentrations of chemical(s) that are known to be harmful and bioavailable in the environment.  This document, and five others published over the last nine years, will be useful for the Program Offices, including Superfund, a

  9. Nonflat equilibrium liquid shapes on flat surfaces.

    Science.gov (United States)

    Starov, Victor M

    2004-01-15

    The hydrostatic pressure in thin liquid layers differs from the pressure in the ambient air. This difference is caused by the actions of surface forces and capillary pressure. The manifestation of the surface force action is the disjoining pressure, which has a very special S-shaped form in the case of partial wetting (aqueous thin films and thin films of aqueous electrolyte and surfactant solutions, both free films and films on solid substrates). In thin flat liquid films the disjoining pressure acts alone and determines their thickness. However, if the film surface is curved then both the disjoining and the capillary pressures act simultaneously. In the case of partial wetting their simultaneous action results in the existence of nonflat equilibrium liquid shapes. It is shown that in the case of S-shaped disjoining pressure isotherm microdrops, microdepressions, and equilibrium periodic films exist on flat solid substrates. Criteria are found for both the existence and the stability of these nonflat equilibrium liquid shapes. It is shown that a transition from thick films to thinner films can go via intermediate nonflat states, microdepressions and periodic films, which both can be more stable than flat films within some range of hydrostatic pressure. Experimental investigations of shapes of the predicted nonflat layers can open new possibilities of determination of disjoining pressure in the range of thickness in which flat films are unstable.

  10. Sensitivity Analysis of the USLE Soil Erodibility Factor to Its Determining Parameters

    Science.gov (United States)

    Mitova, Milena; Rousseva, Svetla

    2014-05-01

    Soil erosion is recognized as one of the most serious soil threats worldwide. Soil erosion prediction is the first step in soil conservation planning. The Universal Soil Loss Equation (USLE) is one of the most widely used models for soil erosion predictions. One of the five USLE predictors is the soil erodibility factor (K-factor), which evaluates the impact of soil characteristics on soil erosion rates. Soil erodibility nomograph defines K-factor depending on soil characteristics, such as: particle size distribution (fractions finer that 0.002 mm and from 0.1 to 0.002 mm), organic matter content, soil structure and soil profile water permeability. Identifying the soil characteristics, which mostly influence the K-factor would give an opportunity to control the soil loss through erosion by controlling the parameters, which reduce the K-factor value. The aim of the report is to present the results of analysis of the relative weight of these soil characteristics in the K-factor values. The relative impact of the soil characteristics on K-factor was studied through a series of statistical analyses of data from the geographic database for soil erosion risk assessments in Bulgaria. Degree of correlation between K-factor values and the parameters that determine it was studied by correlation analysis. The sensitivity of the K-factor was determined by studying the variance of each parameter within the range between minimum and maximum possible values considering average value of the other factors. Normalizing transformation of data sets was applied because of the different dimensions and the orders of variation of the values of the various parameters. The results show that the content of particles finer than 0.002 mm has the most significant relative impact on the soil erodibility, followed by the content of particles with size from 0.1 mm to 0.002 mm, the class of the water permeability of the soil profile, the content of organic matter and the aggregation class. The

  11. Identification determinant factors on willingness to pay for health services in Iran.

    Science.gov (United States)

    Javan-Noughabi, Javad; Kavosi, Zahra; Faramarzi, Ahmad; Khammarnia, Mohammad

    2017-11-21

    A common method used to examine the relationship between internal preferences and caring externalities is willingness to pay (WTP) approach. We aimed to estimate WTP for health status with different severity level and identify determinant factors on WTP. For determining main factors in WTP, a cross-sectional study was conducted in Shiraz in the southeast of Iran, in March to April 2015. The open-ended method was used to estimate monthly WTP in private and altruistic section. Multivariate regression analyses using ordinary least squares were applied to examine the effect of Scio-demographic factors on WTP using SPSS software 21. Participants were willing to pay an average amount of $ 295 in health status 1 and an average amount of $ 596 in health status 6 (worst status) for internal preferences. Altruistic WTP for health status 1 was $ 294 and participants were willing to pay an average amount of $ 416 in health status 6. Multiple regression analysis identified monthly income as the key determinant of WTP for internal preferences and caring externalities (P < 0.01). With an increase of 1% in income, private WTP increase 1.38% in health status 1. The finding indicates that the mean of WTP increases at severe health status; therefore, health policy maker should allocate resources toward severe health status.

  12. Calibration factor determination for solid nuclear track detectors CR-39 type exposed to Rn-222

    International Nuclear Information System (INIS)

    Cazula, Camila Dias; Campos, Marcia Pires de; Mazzilli, Barbara Paci

    2014-01-01

    In the detection method with solid nuclear track detector, when a heavy particle rests on the detector surface, causes a breakdown in their molecular structure forming a trace. One of the typical applications of these detectors is the measurement of the concentration of Rn -222 in air, a noble radioactive gas, part of the U-238 series, emitting alpha particles and important in epidemiological studies to protect individuals from natural radiation. To determine the concentration of Rn -222 in the air in a room is necessary to know the density of lines (traces / cm 2 ) on the detector surface, the exposure time and the calibration factor. The determination of the calibration factor for CR-39 detectors was taken from the exposure of these to a known concentration of Rn-222. Therefore, the detectors were placed inside a cell of Lucas adapted and subsequently exposed to a concentration of Rn-222 15 kBq / m 3 , by means of the apparatus RN-150 Pylon Electronics Incorporation, which has a source of Ra-226 and releases known concentrations of Rn-222. Six calibration factor determinations were performed, the average value obtained was 0.0534 ±0.0021 (traces / cm 2 per Bq / m 3 day). The results are consistent with literature values for the same type of detector and showed good reproducibility

  13. Determination of the 4 mm Gamma Knife helmet relative output factor using a variety of detectors

    International Nuclear Information System (INIS)

    Tsai, J.-S.; Rivard, Mark J.; Engler, Mark J.; Mignano, John E.; Wazer, David E.; Shucart, William A.

    2003-01-01

    Though the 4 mm Gamma Knife helmet is used routinely, there is disagreement in the Gamma Knife users community on the value of the 4 mm helmet relative output factor. A range of relative output factors is used, and this variation may impair observations of dose response and optimization of prescribed dose. To study this variation, measurements were performed using the following radiation detectors: silicon diode, diamond detector, radiographic film, radiochromic film, and TLD cubes. To facilitate positioning of the silicon diode and diamond detector, a three-dimensional translation micrometer was used to iteratively determine the position of maximum detector response. Positioning of the films and TLDs was accomplished by manufacturing custom holders for each technique. Results from all five measurement techniques indicate that the 4 mm helmet relative output factor is 0.868±0.014. Within the experimental uncertainties, this value is in good agreement with results obtained by other investigators using diverse techniques

  14. Determination of the shape factor of 90Sr by means of the cutoff energy yield method

    International Nuclear Information System (INIS)

    Grau Carles, A.; Kossert, K.; Grau Malonda, A.

    2008-01-01

    Usually, Kurie plots are used to analyze beta-spectra shape-factor functions measured by means of semiconductor and magnetic spectrometers. A drawback of these techniques is the occurrence of self-absorption within the samples through which the emission spectrum is altered. In liquid-scintillation samples self-absorption does not occur, but the poor energy resolution makes the analysis of the spectra difficult. To overcome this problem, two resolution-invariant observables are used for determining the shape-factor function of 90 Sr: (1) the maximum point energy and (2) the cutoff energy yield. The measured shape-factor function of 90 Sr agrees with the one which is predicted by theory for the first-forbidden unique transition

  15. Physics of future equilibrium state of nuclear energy utilization

    International Nuclear Information System (INIS)

    Sekimoto, H.

    1994-01-01

    The governing equations for future equilibrium nuclear state are presented and their characteristics are discussed. These equations are solved for several typical cases. In the present study on the equilibrium state, two coincidences are found. The first is the coincidence on the neutron balance performed by the nuclides satisfying the equilibrium condition. The finite neutron multiplication factor is near unity. The second is the coincidence on the toxicity. The produced long-life fission product toxicity is near the incinerated natural fuel toxicity. (author). 2 refs., 2 tabs., 4 figs

  16. Experimental determination of the dynamic shape factor of primary sodium peroxide aerosols

    International Nuclear Information System (INIS)

    Barbe, M.

    1985-09-01

    A hypothetical accident in a fast breeeder reactor could cause aerosols to be generated in a sodium fire. The computer codes relative to the modeling of such accidents make it necessary to use various input parameters among which the dynamic shape factor kappa of the aerosols produced. This study concerns the shape factor of sodium peroxide; the discrepancies between the values of this parameter given in the literature justifies the usefulness of our work. We have tried to use the simplest method. The dynamic shape factor is proportional to the ratio of the equivalent volume diameter to the aerodynamic diameter for a given particle. Therefore, these two quantities must be determined. The particles are classified by means of a centrifuge as a function of their aerodynamic diameter; the equivalent volume diameter of the particles thus selected can then be determined by assessing the mass (neutron activation) and the number (electron microscope) on the same sample of particles. Our results show that the dynamic shape factor of sodium peroxide submicronic particles generated by a fire is nearly 1 and the values of this parameter increase with the particles size [fr

  17. Determining factors influencing survival of breast cancer by fuzzy logistic regression model.

    Science.gov (United States)

    Nikbakht, Roya; Bahrampour, Abbas

    2017-01-01

    Fuzzy logistic regression model can be used for determining influential factors of disease. This study explores the important factors of actual predictive survival factors of breast cancer's patients. We used breast cancer data which collected by cancer registry of Kerman University of Medical Sciences during the period of 2000-2007. The variables such as morphology, grade, age, and treatments (surgery, radiotherapy, and chemotherapy) were applied in the fuzzy logistic regression model. Performance of model was determined in terms of mean degree of membership (MDM). The study results showed that almost 41% of patients were in neoplasm and malignant group and more than two-third of them were still alive after 5-year follow-up. Based on the fuzzy logistic model, the most important factors influencing survival were chemotherapy, morphology, and radiotherapy, respectively. Furthermore, the MDM criteria show that the fuzzy logistic regression have a good fit on the data (MDM = 0.86). Fuzzy logistic regression model showed that chemotherapy is more important than radiotherapy in survival of patients with breast cancer. In addition, another ability of this model is calculating possibilistic odds of survival in cancer patients. The results of this study can be applied in clinical research. Furthermore, there are few studies which applied the fuzzy logistic models. Furthermore, we recommend using this model in various research areas.

  18. Trust as a factor in determining how to attract, motivate and retain talentT

    Directory of Open Access Journals (Sweden)

    Nico Martins

    2002-10-01

    Full Text Available The aim of this study was to validate a questionnaire that can be used to determine how employees select the best company to work for. The second focus was to determine the role of trust in a relationship where employers must attract, motivate and retain employees. The confirmatory factor analysis resulted in 10 dimensions that supported most of the theoretically constructed dimensions. A second-order factor analysis was done and it became clear that there are two second-order factors underlying factor 1, namely leadership and trust. A strong correlation was found between trust and the dimensions of job satisfaction, relationships and leadership. Opsomming Die doel van die studie was om ‘n vraelys te valideer wat gebruik kon word om te bepaal hoe werknemers die beste organisasie om voor te werk kies. Die tweede fokus was om die rol van vertroue te bepaal in ‘n vertrouensverhouding waar werkgewers werknemers moet lok, motiveer en behou. ‘n Bevestigende faktorontleding het tien faktore tot gevolg gehad wat die meeste van die teoreties opgestelde dimensies ondersteun. ‘n Tweede-orde-faktorontleding van faktor een het aangetoon dat die faktor uit twee tweede-orde-faktore, leierskap en vertroue bestaan. ‘n Sterk korrelasie het voorgekom tussen vertroue en die dimensies van postevredenheid, verhoudinge en leierskap.

  19. Pre and post-natal risk and determination of factors for child obesity.

    Science.gov (United States)

    Trandafir, L M; Temneanu, O R

    2016-01-01

    Obesity is considered a condition presenting a complex, multi-factorial etiology that implies genetic and non-genetic factors. The way the available information should be efficiently and strategically used in the obesity and overweight prohylaxisprogrammes for children all over the world is still unclear for most of the risk factors. Mothers' pre-conception weight and weight gain during pregnancy are two of the most important prenatal determinants of childhood obesity. Maternal obesity and gestational weight gain are associated with foetal macrosomia and childhood obesity, and this effect extends into adulthood. Obesity and the metabolic syndrome in children originate in intrauterine life. The current obesity epidemic is probably the result of our evolutive inheritance associated with the consumption of highly processed food with an increased calorific value. The determination of risk factors involved in child obesity are: genetic predisposition, diet, sedentary behaviors, socioeconomic position, ethnic origin, microbiota, iatrogenic, endocrine diseases, congenital and acquired hypothalamic defects, usage of medications affecting appetite. However, the vast majority of patients will not have any of these identifiable conditions. Regardless of the aetiology, all the patients should be considered for modifiable lifestyle risk factors and screened for the complications of obesity.

  20. Equilibrium reconstruction in the TCA/Br tokamak

    International Nuclear Information System (INIS)

    Sa, Wanderley Pires de

    1996-01-01

    The accurate and rapid determination of the Magnetohydrodynamic (MHD) equilibrium configuration in tokamaks is a subject for the magnetic confinement of the plasma. With the knowledge of characteristic plasma MHD equilibrium parameters it is possible to control the plasma position during its formation using feed-back techniques. It is also necessary an on-line analysis between successive discharges to program external parameters for the subsequent discharges. In this work it is investigated the MHD equilibrium configuration reconstruction of the TCA/BR tokamak from external magnetic measurements, using a method that is able to fast determine the main parameters of discharge. The thesis has two parts. Firstly it is presented the development of an equilibrium code that solves de Grad-Shafranov equation for the TCA/BR tokamak geometry. Secondly it is presented the MHD equilibrium reconstruction process from external magnetic field and flux measurements using the Function Parametrization FP method. this method. This method is based on the statistical analysis of a database of simulated equilibrium configurations, with the goal of obtaining a simple relationship between the parameters that characterize the equilibrium and the measurements. The results from FP are compared with conventional methods. (author)

  1. Determination of the Factors Influencing Store Preference in Erzurum by a Multinomial Logit Model

    Directory of Open Access Journals (Sweden)

    Hüseyin ÖZER

    2008-12-01

    Full Text Available The main objective of this study is to determine factors influencing store preference of the store costumers in Erzurum in terms of some characteristics of the store and its product and costumers’ demographic characteristics (sex, age, marital status, level of education and their income level. In order to carry out this objective, Pearson chi-square test is applied to determine whether there is a relationship between the store preference and customer, stores, and some characteristics of products and a multinominal logit model is fitted by stepwise regression method to the cross-section data compiled from a questionnaire applied to 384 store costumers in the center of Erzurum province. According to the model estimation and test results, the variables of marital status (married, education (primary and cheapness (unimportant for Migros; education (middle for Özmar and marital status (married for the other stores are determined as statistically significant at the level of 5 percent

  2. Determining Student Internet Addiction Levels in Secondary Education and the Factors that Affect It

    Directory of Open Access Journals (Sweden)

    Fezile Ozdamli

    2013-05-01

    Full Text Available The aim of this research is to determine the level of internet addiction on the part of students in secondary education in North Cyprus and the factors that affect it. In this research, a survey method which provides a general universal judgment was used to determine the level of internet addiction on the part of such students. It has been found that 59.9% of the students are at low of becoming internet addicts, 20.7% of them are in the high risk category, 13.5% face no risk of addiction, while 5.9% are internet addicts. It was determined that as students’ internet usage hours increase, the risk of addiction increases.

  3. Determination Of Output Factor For Photon Beam Of The Mitsubishi EXL-14 Linear Accelerator

    International Nuclear Information System (INIS)

    Nurman R; Sri-Inang S; Dani

    2003-01-01

    This paper describes the determination of output factor for 6 MV photon beam of The Mitsubishi EXL-14 linear accelerator teletherapy unit. Determination of percentage depth dose curve has been done using Wallhofer dosemeter at source to surface distance, SSD of 100 cm and field size of 10 cm x 10 cm. Measurement of output has been carried out using a 0.6 cc ionization chamber inside a water phantom at depth of 5 cm with source to surface distance, SSD of 100 cm for square fields ranging in size 4 cm x 4 cm up to 10 cm x 10 cm. Output for rectangular fields which equal to the equivalent square fields were also determined. The results obtained shows that the deviations of the output for 12 cm x 3 cm and 19 cm x 7 cm were higher than ±2% to the output of the equivalent square fields. (author)

  4. The Fisher Market Game: Equilibrium and Welfare

    DEFF Research Database (Denmark)

    Branzei, Simina; Chen, Yiling; Deng, Xiaotie

    2014-01-01

    The Fisher market model is one of the most fundamental resource allocation models in economics. In a Fisher market, the prices and allocations of goods are determined according to the preferences and budgets of buyers to clear the market. In a Fisher market game, however, buyers are strategic...... and report their preferences over goods; the market-clearing prices and allocations are then determined based on their reported preferences rather than their real preferences. We show that the Fisher market game always has a pure Nash equilibrium, for buyers with linear, Leontief, and Cobb-Douglas utility...

  5. The Determinant Factors of Creative Economy Craftsmen Sustainability in South Sulawesi Province

    Directory of Open Access Journals (Sweden)

    Helda Ibrahim

    2013-10-01

    Full Text Available Creative economy craftsmen have big contribution to regional income and able to sustain in crisis. It can be seen on the average of Gross Domestic Product has employed 5.4 million in average for 2002-2009 with participation level of 5.8%. Therefore, a strategic sustainability is needed especially for the determinant factors of sustainability related to creative economy craftsmen. This research aims to observe the determinant factors of sustainability of creative economy craftsmen in Wajo and Bulukumba Regencies in South Sulawesi Province. Sample for the research was 215 creative economy craftsmen. Data collection is conducted on January to April 2012 consists of primary and secondary data. Research method was using prospective analysis to determine important factors to the sustainability of creative economy craftsmen that predict future alternatives. Result from Rap-UEK simulation for the composite of five dimensions showed a less sustainable status of 48.97%. Research results showed that there are six dominant or main factors in determining business sustainability of creative economy craftsmen, one place sale, coordination with the government and private sectors, capital source, increase in the product of creative economy business, business field and product development Normal 0 false false false IN X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman

  6. Determining the Covering Factor of Compton-Thick Active Galactic Nuclei with NuSTAR

    Science.gov (United States)

    Brightman, M.; Balokovic, M.; Stern, D.; Arevalo, P.; Ballantyne, D. R.; Bauer, F. E.; Boggs, S. E.; Craig, W. W.; Christensen, F. E.; Zhang, W. W.

    2015-01-01

    The covering factor of Compton-thick (CT) obscuring material associated with the torus in active galactic nuclei (AGNs) is at present best understood through the fraction of sources exhibiting CT absorption along the line of sight (N(sub H) greater than 1.5 x 10(exp 24) cm(exp -2)) in the X-ray band, which reveals the average covering factor. Determining this CT fraction is difficult, however, due to the extreme obscuration. With its spectral coverage at hard X-rays (greater than 10 keV), Nuclear Spectroscopic Telescope Array (NuSTAR) is sensitive to the AGNs covering factor since Compton scattering of X-rays off optically thick material dominates at these energies. We present a spectral analysis of 10 AGNs observed with NuSTAR where the obscuring medium is optically thick to Compton scattering, so-called CT AGNs. We use the torus models of Brightman and Nandra that predict the X-ray spectrum from reprocessing in a torus and include the torus opening angle as a free parameter and aim to determine the covering factor of the CT gas in these sources individually. Across the sample we find mild to heavy CT columns, with N(sub H) measured from 10(exp 24) to 10(exp 26) cm(exp -2), and a wide range of covering factors, where individual measurements range from 0.2 to 0.9. We find that the covering factor, f(sub c), is a strongly decreasing function of the intrinsic 2-10 keV luminosity, L(sub X), where f(sub c) = (-0.41 +/- 0.13)log(sub 10)(L(sub X)/erg s(exp -1))+18.31 +/- 5.33, across more than two orders of magnitude in L(sub X) (10(exp 41.5) - 10(exp 44) erg s(exp -1)). The covering factors measured here agree well with the obscured fraction as a function of LX as determined by studies of local AGNs with L(sub X) greater than 10(exp 42.5) erg s(exp -1).

  7. Lower hybrid wave current ramp-up and plasma equilibrium

    International Nuclear Information System (INIS)

    Gong Xueyu

    1996-01-01

    Questions on lower hybrid driven current and plasma equilibrium are studied. With the induced electric field taken into account, a system of self-consistent equations is obtained. This theory has been applied to some moments of the current ramp-up phase for the Tokamak Engineering Test Breeder (TETB) to study the lower hybrid current drive and MHD equilibrium. So, better electron current and safety factor profiles are obtained

  8. Analysis of the chemical equilibrium of combustion at constant volume

    Directory of Open Access Journals (Sweden)

    Marius BREBENEL

    2014-04-01

    Full Text Available Determining the composition of a mixture of combustion gases at a given temperature is based on chemical equilibrium, when the equilibrium constants are calculated on the assumption of constant pressure and temperature. In this paper, an analysis of changes occurring when combustion takes place at constant volume is presented, deriving a specific formula of the equilibrium constant. The simple reaction of carbon combustion in pure oxygen in both cases (constant pressure and constant volume is next considered as example of application, observing the changes occurring in the composition of the combustion gases depending on temperature.

  9. Magnetic analysis of tokamak plasma with approximate MHD equilibrium solution

    International Nuclear Information System (INIS)

    Moriyama, Shin-ichi; Hiraki, Naoji

    1993-01-01

    A magnetic analysis method for determining equilibrium configuration parameters (plasma shape, poloidal beta and internal inductance) on a non-circular tokamak is described. The feature is to utilize an approximate MHD equilibrium solution which explicitly relates the configuration parameters with the magnetic fields picked up by magnetic sensors. So this method is suitable for the real-time analysis performed during a tokamak discharge. A least-squares fitting procedure is added to the analytical algorithm in order to reduce the errors in the magnetic analysis. The validity is investigated through the numerical calculation for a tokamak equilibrium model. (author)

  10. Environmental determinants of cardiovascular diseases risk factors: a qualitative directed content analysis.

    Science.gov (United States)

    Sabzmakan, Leila; Mohammadi, Eesa; Morowatisharifabad, Mohammad Ali; Afaghi, Ahmad; Naseri, Mohammad Hassan; Mirzaei, Masoud

    2014-05-01

    Cardiovascular diseases (CVDs) are the number one cause of death in the world. In most analyses of health problems, environment plays a significant and modifiable role in causing the problem either directly or indirectly through behavior. This study aims to understand the patients and healthcare providers' experiences about the environmental determinants of CVD risk factors based on the Precede Model. This qualitative study conducted over six months in 2012 at Diabetes Units of Health Centers associated with Alborz University of Medical Sciences and Health Services which is located in Karaj, Iran. The data were collected based on individual semi-structured interviews with 50 patients and 12 healthcare providers. Data analysis was performed simultaneous with data collection using the content analysis directed method. Lack of behaviors like stress control, healthy eating and physical activity were the roots of the risk factors for CVD. The environmental factor is one of the barriers for conducting these behaviors. The environmental barriers included of structural environment including "availability and accessibility of health resources", "new skills", and "law and policies" which are located in enabling category and social environment including "social support", "motivation to comply" and "consequences of behavior" which are located in reinforcing category. The most barriers to performing health behaviors were often structural. The environmental factors were barriers for doing healthy behaviors. These factors need to be considered to design health promotion interventions. Policymakers should not only focus on patients' education but also should provide specific facilities to enhance economic, social and cultural status.

  11. Factors determining the success of public private partnership projects in Nigeria

    Directory of Open Access Journals (Sweden)

    Afeez Olalekan Sanni

    2016-06-01

    Full Text Available The implementation of public private partnership (PPP procurement method is expected to help governments in the development of infrastructures and provides an opportunity for the reduction in the governments’ debt profiles. This method has been adopted in Nigeria for more than a decade and with these years of implementation, few infrastructural projects have been developed using this method while some have been unsuccessful. This study aims to examine the PPP projects implementation in Nigeria and identify the most critical factors that could determine the success of such projects. A total of 184 questionnaires were received from public and private sectors’ participants in the implementation of PPP projects. An exploratory factor analysis identified seven critical success factors as projects feedback, leadership focus, risk allocation and economic policy, good governance and political support, short construction period, favourable socio-economic factors, and delivering publicly needed service. This study shows that more developmental projects could be delivered through PPP if the government could focus on these main factors in the implementation process. The result will influence policy development towards PPP and guide the partners in the development of PPP projects.

  12. Use of Bioclimatic Factors to Determine Potential Niche of Vaccinia Virus, an Emerging and Zoonotic Pathogen

    Science.gov (United States)

    Quiner, C. A.; Nakazawa, Y.

    2017-12-01

    Emerging and understudied pathogens often lack information that most commonly used analytical tools require, such as negative controls or baseline data making public health control of emerging pathogens challenging. In lieu of opportunities to collect more data from larger outbreaks or formal epidemiological studies, new analytical strategies, merging case data with publically available datasets, can be used to understand transmission patterns and drivers of disease emergence. Zoonotic infections with Vaccinia virus (VACV) were first reported in Brazil in 1999, VACV is an emerging zoonotic Orthopoxvirus, which primarily infects dairy cattle and farmers in close contact with infected cows. Prospective studies of emerging pathogens could provide critical data that would inform public health planning and response to outbreaks. By using the location of 87-recorded outbreaks and publicly available bioclimatic data we demonstrate one such approach. Using an Ecological Niche Model (ENM), we identify the environmental conditions under which VACV outbreaks have occurred, and determine additional locations in two affected South American countries that may be susceptible to transmission. Further, we show how suitability for the virus responds to different levels of various environmental factors and highlight the most important climatic factors in determining its transmission. The final ENM predicted all areas where Brazilian outbreaks occurred, two out of five Colombian outbreaks and identified new regions within Brazil that are suitable for transmission based on bioclimatic factors. Further, the most important factors in determining transmission suitability are precipitation of the wettest quarter, annual precipitation, mean temperature of the coldest quarter and mean diurnal range. The analyses here provide a means by which to study patterns of an emerging infectious disease, and regions that are potentially at risk for it, in spite of the paucity of critical data. Policy

  13. Removal factor determination of some local smear papers for surface contamination smear test

    International Nuclear Information System (INIS)

    Suratman; Indriyotomo, D.; Aminjoyo, S.

    1996-01-01

    Removal factor determination of some local smear papers has been done, using dry smear test method. The aim of this research is to find removal values of local smear papers on some surfaces, to replace import smear papers. Smear test was done on the various surfaces i.e.: porcelain, formica, glass, stainless steel, steel and PVC, with the local smear papers I.e.: Padalarang, Diagonal, Concorde, Marga, Hard Cloth, and import smear paper. The artificial contaminant which used were I-131 and P-32. The removal factor values of Padalarang paper for surfaces: porcelain, formica, glass stainless steel, steel and PVC were: 24.5%, 20.0%, 27.0%, 6.8%, 4.9%, and 13.6% respectively. The removal factor values of Diagonal paper were:18.4%, 15.9%, 5.7%, 3.5%, and 9.1% respectively. The removal factor values of concord paper were: 18.5%, 20.3%, 23.1%, 6.6%, 3.8%, and 9.0% respectively. The removal factor values of Marga paper were: 16.7%, 13.5%, 21.1%, 4.2%, 4.1% and 8.1% respectively. The removal factor values of Hard Cloth were: 18.6%, 12.6%, 20.5%, 8.2%, and 10.1% respectively. The removal factor values of import smear paper were: 17.8%, 15.0%, 18.8%, 9.1%, 4.8%, and 14.4% respectively . Substitution alternative of import smear paper is Padalarang. (author)

  14. Determinants of use of maternal health services in Nigeria - looking beyond individual and household factors

    Directory of Open Access Journals (Sweden)

    Fatusi Adesegun

    2009-09-01

    Full Text Available Abstract Background Utilization of maternal health services is associated with improved maternal and neonatal health outcomes. Considering global and national interests in the Millennium Development Goal and Nigeria's high level of maternal mortality, understanding the factors affecting maternal health use is crucial. Studies on the use of maternal care services have largely overlooked community and other contextual factors. This study examined the determinants of maternal services utilization in Nigeria, with a focus on individual, household, community and state-level factors. Methods Data from the 2005 National HIV/AIDS and Reproductive Health Survey - an interviewer-administered nationally representative survey - were analyzed to identify individual, household and community factors that were significantly associated with utilization of maternal care services among 2148 women who had a baby during the five years preceding the survey. In view of the nested nature of the data, we used multilevel analytic methods and assessed state-level random effects. Results Approximately three-fifths (60.3% of the mothers used antenatal services at least once during their most recent pregnancy, while 43.5% had skilled attendants at delivery and 41.2% received postnatal care. There are commonalities and differences in the predictors of the three indicators of maternal health service utilization. Education is the only individual-level variable that is consistently a significant predictor of service utilization, while socio-economic level is a consistent significant predictor at the household level. At the community level, urban residence and community media saturation are consistently strong predictors. In contrast, some factors are significant in predicting one or more of the indicators of use but not for all. These inconsistent predictors include some individual level variables (the woman's age at the birth of the last child, ethnicity, the notion of ideal

  15. Equilibrium blood pool scanning in the evaluation of hemophilic arthropathy

    International Nuclear Information System (INIS)

    Spies, S.; Green, D.; Rana, N.A.; Milgram, J.W.; Mintzer, R.

    1978-01-01

    Arthropathy was evaluated in six patients with severe hemophilia (factor VIII<1%) using the technique of blood pool scanning. Employing an in vivo method for erythrocyte labelling with technetium-99m, a dynamic perfusion sequence was obtained using a scintillation camera over the joint(s) to be examined. Subsequently, equilibrium blood pool images of the joints were obtained to determine regional blood volume. In young patients with repeated episodes of acute hemarthrosis, increased vascularity and increased blood pool in the affected joints were demonstrated. In older patients with fixed, contracted joints and degenerative arthropathy, vascularity and regional blood volume were not abnormal. Blood pool scanning is a safe, non-invasive technique that augments the clinical and radiographic examination of the joints. The method is helpful in distinguishing acute joint bleeding from chronic synovitis and arthritis, and may prove useful in selecting patients for synovectomy. (author)

  16. Statistical approach to partial equilibrium analysis

    Science.gov (United States)

    Wang, Yougui; Stanley, H. E.

    2009-04-01

    A statistical approach to market equilibrium and efficiency analysis is proposed in this paper. One factor that governs the exchange decisions of traders in a market, named willingness price, is highlighted and constitutes the whole theory. The supply and demand functions are formulated as the distributions of corresponding willing exchange over the willingness price. The laws of supply and demand can be derived directly from these distributions. The characteristics of excess demand function are analyzed and the necessary conditions for the existence and uniqueness of equilibrium point of the market are specified. The rationing rates of buyers and sellers are introduced to describe the ratio of realized exchange to willing exchange, and their dependence on the market price is studied in the cases of shortage and surplus. The realized market surplus, which is the criterion of market efficiency, can be written as a function of the distributions of willing exchange and the rationing rates. With this approach we can strictly prove that a market is efficient in the state of equilibrium.

  17. The Determinant Factors Of Sectoral Stock Return In Bullish And Bearish Condition At Indonesian Capital Market

    Directory of Open Access Journals (Sweden)

    Defrizal

    2015-07-01

    Full Text Available Abstract this study aims to explain determinant factors of sectoral stock return in bullish and bearish condition at Indonesian capital market. This study used a multi-factor asset pricing model with sectoral stock return as the dependent variable and stock market return interest rates and exchange rate as independent variables. The Identification of stock market condition by using a Markov Switching Models which are also used as the basis for segmenting the data into bullish and bearish conditions. Estimates of the model used the robust least square method. This study used data from Indonesian Stock Exchange to the observation period from January 1996 to December 2013. The results of this study were 1 simultaneously stock market return interest rates and exchange rate affected the sectoral stock return in bullish and bearish condition. 2 Partially the stock market return positively effect and is as a main factor in determining the sectoral stock return in all industries in either bullish condition or bearish condition while the effect of the interest rates and exchange rate do not consistently affect the sectoral stock return in different industries and market conditions.

  18. Determination of true coincidence correction factors using Monte-Carlo simulation techniques

    Directory of Open Access Journals (Sweden)

    Chionis Dionysios A.

    2014-01-01

    Full Text Available Aim of this work is the numerical calculation of the true coincidence correction factors by means of Monte-Carlo simulation techniques. For this purpose, the Monte Carlo computer code PENELOPE was used and the main program PENMAIN was properly modified in order to include the effect of the true coincidence phenomenon. The modified main program that takes into consideration the true coincidence phenomenon was used for the full energy peak efficiency determination of an XtRa Ge detector with relative efficiency 104% and the results obtained for the 1173 keV and 1332 keV photons of 60Co were found consistent with respective experimental ones. The true coincidence correction factors were calculated as the ratio of the full energy peak efficiencies was determined from the original main program PENMAIN and the modified main program PENMAIN. The developed technique was applied for 57Co, 88Y, and 134Cs and for two source-to-detector geometries. The results obtained were compared with true coincidence correction factors calculated from the "TrueCoinc" program and the relative bias was found to be less than 2%, 4%, and 8% for 57Co, 88Y, and 134Cs, respectively.

  19. [Determining Factors in the Access to Mental Health Services by the Adult Colombian Population].

    Science.gov (United States)

    González, Lina María; Peñaloza, Rolando Enrique; Matallana, María Alexandra; Gil, Fabián; Gómez-Restrepo, Carlos; Landaeta, Angela Patricia Vega

    2016-12-01

    Access to mental health services by people with mental disorders has traditionally been limited, and is associated with attitudinal, social, and structural variables. To analyse the factors that determine access to mental health services by the adult population (18-44 years old) in Colombia, from the results obtained in the 2015 National Mental Health Survey. Analysis of variables of access to attention in mental health care for adults. The reasons for not consulting were classified as barriers of behavioural supply and demand. To analyse the factors associated with access to mental health services in the Colombian adult population, the use of health services in the last 12 months for emotional, nervous or mental health problems was taken into account, as well as associated variables such as demographic characteristics, occupational activity, affiliation to social security, and health status variables. The relationships between these variables were estimated using bivariate multinomial logistic regression models. Rural residence, being married, and having a chronic disease were associated with the decision to consult or not to consult the doctor. Further studies should be conducted to evaluate the situation as regards mental health care access, as well as to determine the potential factors associated with these limitations. Copyright © 2016 Asociación Colombiana de Psiquiatría. Publicado por Elsevier España. All rights reserved.

  20. Intrinsic motivation factors based on the self-determinant theory for regular breast cancer screening.

    Science.gov (United States)

    Jung, Su Mi; Jo, Heui-Sug

    2014-01-01

    The purpose of this study was to identify factors of intrinsic motivation that affect regular breast cancer screening and contribute to development of a program for strategies to improve effective breast cancer screening. Subjects were residing in South Korea Gangwon-Province and were female over 40 and under 69 years of age. For the investigation, the Intrinsic Motivation Inventory (IMI) was modified to the situation of cancer screening and was used to survey 905 inhabitants. Multinominal logistic regression analyses were conducted for regular breast cancer screening (RS), one-time breast cancer screening (OS) and non-breast cancer screening (NS). For statistical analysis, IBM SPSS 20.0 was utilized. The determinant factors between RS and NS were "perceived effort and choice" and "stress and strain" - internal motivations related to regular breast cancer screening. Also, determinant factors between RS and OS are "age" and "perceived effort and choice" for internal motivation related to cancer screening. To increase regular screening, strategies that address individual perceived effort and choice are recommended.