Transport-related lifestyle and environmentally-friendly travel mode choices

DEFF Research Database (Denmark)

Thøgersen, John

2018-01-01

. Finally, a multivariate GLM analysis reveals that three behavioral tendencies of importance for transport-related environmental impacts vary significantly and substantially between lifestyle segments: vehicle ownership, everyday travel-mode choice and environmentally-friendly transport innovativeness...

Electrochemical Behaviour of Environmentally Friendly Inhibitor of ...

African Journals Online (AJOL)

Electrochemical Behaviour of Environmentally Friendly Inhibitor of Aloe Secundiflora Extract in Corrosion Control of Carbon Steel in Soft Water Media. ... The investigation was performed at different inhibitor concentrations under static and dynamic conditions using a Rotating Disk Electrode (RDE). The impedance and ...

A Summary of Environmentally Friendly Turbine Design Concepts

Energy Technology Data Exchange (ETDEWEB)

Odeh, Mufeed [United States Geological Survey - BRD, Turners Falls, MA (United States)

1999-07-01

The Advanced Hydropower Turbine System Program (AHTS) was created in 1994 by the U.S. Department of Energy, Electric Power Research Institute, and the Hydropower Research Foundation. The Program’s main goal is to develop “environmentally friendly” hydropower turbines. The Program’s first accomplishment was the development of conceptual designs of new environmentally friendly turbines. In order to do so, two contractors were competitively selected. The ARL/NREC team of engineers and biologists provided a conceptual design for a new turbine runner*. The new runner has the potential to generate hydroelectricity at close to 90% efficiency. The Voith team produced new fish-friendly design criteria for Kaplan and Francis turbines that can be incorporated in units during rehabilitation projects or in new hydroelectric facilities**. These include the use of advanced plant operation, minimum gap runners, placement of wicket gates behind stay vanes, among others. The Voith team will also provide design criteria on aerating Francis turbines to increase dissolved oxygen content. Detailed reviews of the available literature on fish mortality studies, causation of injuries to fish, and available biological design criteria that would assist in the design of fish-friendly turbines were performed. This review identified a need for more biological studies in order to develop performance criteria to assist turbine manufacturers in designing a more fish-friendly turbine.

Radioecological implementation of 'environmental friendly' materials alumosilicate origin

International Nuclear Information System (INIS)

Stojanovic, M.; Milojkovic, J.; Grubisic, M.; Iles, D.

2009-01-01

The problem of modern civilization is radionuclide contamination of soil, especially in Serbia.There was NATO aggression when were used munitions with depleted uranium, and after that waste material was deposed on the inhabited and mostly fertile soil. Having in mind that not all activities have been taken that would permanently eliminate the consequences of this radionuclide, means that entering depleted uranium in the food chain is a real danger now. Solving this problem requires a holistic approach including the application of safe and effective 'environmental friendly' materials that are economical, locally available and easily applicable. Our investigations have included testing the efficiency of natural and modified with domestic origin aluminosilicate materials, zeolite, phosphate, bentonite and diatomite for in situ remediation of soil. (author) [sr

The Behavior of Environmentally Friendly Corrosion Preventative Compounds in an Aggressive Coastal Marine Environment

Science.gov (United States)

Montgomery, Eliza L.; Calle, Luz Marina; Curran Jerome C.; Kolody, Mark R.

2013-01-01

The shift to use environmentally friendly technologies throughout future space-related launch programs prompted a study aimed at replacing current petroleum and solvent-based Corrosion Preventive Compounds (CPCs) with environmentally friendly alternatives. The work in this paper focused on the identification and evaluation of environmentally friendly CPCs for use in protecting flight hardware and ground support equipment from atmospheric corrosion. The CPCs, while a temporary protective coating, must survive in the aggressive coastal marine environment that exists throughout the Kennedy Space Center, Florida. The different protection behaviors of fifteen different soft film CPCs, both common petroleum-based and newer environmentally friendly types, were evaluated on various steel and aluminum substrates. The CPC and substrate systems were subjected to atmospheric testing at the Kennedy Space Center's Beachside Atmospheric Corrosion Test Site, as well as cyclic accelerated corrosion testing. Each CPC also underwent physical characterization and launch-related compatibility testing . The initial results for the fifteen CPC systems are reported : Key words: corrosion preventive compound, CPC, spaceport, environmentally friendly, atmospheric exposure, marine, carbon steel, aluminum alloy, galvanic corrosion, wire on bolt.

Conventional, Partially Converted and Environmentally Friendly Farming in South Korea: Profitability and Factors Affecting Farmers’ Choice

Directory of Open Access Journals (Sweden)

Saem Lee

2016-07-01

Full Text Available While organic farming is well established in Europe a nd USA, it is still catching up in Asian countries. The government of South Korea has implemented environmentally friendly farming that encompasses organic farming. Despite the promotion of environmentally friendly farming, it still has a low share in South Korea and partially converted farming has emerged in some districts of South Korea. However, the partially converted farming has not yet been investigated by the government. Thus, our study implemented a financial analysis to compare the annual costs and net returns of conventional, partially converted and environmentally friendly farming in Gangwon Province. The result showed that environmentally friendly farming was more profitable with respect to farm net returns. To find out the factors affecting the adoption of environmentally friendly farming, multinomial logistic regression was implemented. The findings revealed that education and subsidy positively and significantly influenced the probability of farmers’ choice on partially converted and environmentally friendly farming. Farm size had a negative and significant relationship with only environmentally friendly farming. This study will contribute to future policy establishment for sustainable agriculture as recommended by improving the quality of fertilizers, suggesting the additional investigation associated with partially converted farmers.

Consumer Purchase Behaviour Toward Environmentally Friendly Products in Japan

OpenAIRE

Udo, Miyako

2007-01-01

This study considers consumer purchase behaviour toward environmentally friendly products in Japan and focuses on factors which can influence environmentally responsible purchase decision making. The modified theory of planned behaviour based on previous research in the area of environmentally responsible purchase behaviour and ethical purchase decision making is applied to examine factors affecting the purchase decision making and key findings from the present study are highlighted. It can b...

Environmental-friendly wool fabric finishing by some water plant extracts

Directory of Open Access Journals (Sweden)

Šmelcerović Miodrag

2007-01-01

Full Text Available In this article, environmental-friendly finishing of wool fabric were processed with several water extract plants, such as hibiscus, St. John's wort, and marigold. The plant extracts have good basis in the commercial dyeing of wool, for garment and carpet industry. At the same time, the environmental-friendly finishing by water extracts plants shows very good fastness of the antimicrobial properties and coloration of wool fabric. From an ecological viewpoint, the substitution of chemical dyes with "natural products" may represent not only a strategy to reduce risk and pollutants but also an opportunity for new markets and new businesses, which can expend involving of ecology in trade policy.

Environmentally Friendly Pretreatment for Department of Defense Applications

Science.gov (United States)

2012-08-29

Develop an environmentally friendly pretreatment system for multi-material Department of Defense applications ― Free of hexavalent chromium (Cr6...Zn phosphate and chrome wash primer •Two Zirconium pretreatment variations passed the 336 hr and 1000 hr B-117 outlined per MIL-DTL-53022 or MIL

Environmental Friendly Coatings and Corrosion Prevention For Flight Hardware Project

Science.gov (United States)

Calle, Luz

2014-01-01

Identify, test and develop qualification criteria for environmentally friendly corrosion protective coatings and corrosion preventative compounds (CPC's) for flight hardware an ground support equipment.

An evidential reasoning-based AHP approach for the selection of environmentally-friendly designs

Energy Technology Data Exchange (ETDEWEB)

NG, C.Y., E-mail: ng.cy@cityu.edu.hk

2016-11-15

Due to the stringent environmental regulatory requirements being imposed by cross-national bodies in recent years, manufacturers have to minimize the environmental impact of their products. Among those environmental impact evaluation tools available, Life Cycle Assessment (LCA) is often employed to quantify the product's environmental impact throughout its entire life cycle. However, owing to the requirements of expert knowledge in environmental science and vast effort for data collection in carrying out LCA, as well as the common absence of complete product information during product development processes, there is a need to develop a more suitable tool for product designers. An evidential reasoning-based approach, which aims at providing a fast-track method to perform design alternative evaluations for non-LCA experts, is therefore introduced as a new initiative to deal with the incomplete or uncertain information. The proposed approach also enables decision makers to quantitatively assess the life cycle phases and design alternatives by comparing their potential environmental impacts, thus effectively and efficiently facilitates the identification of greener designs. A case application is carried out to demonstrate the applicability of the proposed approach.

BUMPER: the Bayesian User-friendly Model for Palaeo-Environmental Reconstruction

Science.gov (United States)

Holden, Phil; Birks, John; Brooks, Steve; Bush, Mark; Hwang, Grace; Matthews-Bird, Frazer; Valencia, Bryan; van Woesik, Robert

2017-04-01

We describe the Bayesian User-friendly Model for Palaeo-Environmental Reconstruction (BUMPER), a Bayesian transfer function for inferring past climate and other environmental variables from microfossil assemblages. The principal motivation for a Bayesian approach is that the palaeoenvironment is treated probabilistically, and can be updated as additional data become available. Bayesian approaches therefore provide a reconstruction-specific quantification of the uncertainty in the data and in the model parameters. BUMPER is fully self-calibrating, straightforward to apply, and computationally fast, requiring 2 seconds to build a 100-taxon model from a 100-site training-set on a standard personal computer. We apply the model's probabilistic framework to generate thousands of artificial training-sets under ideal assumptions. We then use these to demonstrate both the general applicability of the model and the sensitivity of reconstructions to the characteristics of the training-set, considering assemblage richness, taxon tolerances, and the number of training sites. We demonstrate general applicability to real data, considering three different organism types (chironomids, diatoms, pollen) and different reconstructed variables. In all of these applications an identically configured model is used, the only change being the input files that provide the training-set environment and taxon-count data.

Design of environmentally friendly calcium sulfate-based building materials : towards an improved indoor air quality

NARCIS (Netherlands)

Yu, Q.

2012-01-01

This thesis addresses the performance based design and development of an environmentally friendly calcium sulfate-based indoor building product towards an improved indoor air quality. Here "environmental friendly" is referred to the environment related subjects including: (1) the selection of raw

A Survey on Turkish Elementary School Students' Environmental Friendly Behaviours and Associated Variables

Science.gov (United States)

Alp, Elvan; Ertepinar, Hamide; Tekkaya, Ceren; Yilmaz, Ayhan

2008-01-01

This study investigated elementary school students' environmental knowledge and attitudes, the effects of sociodemographic variables on environmental knowledge and attitudes, and how self-reported environmentally friendly behaviour is related to environmental knowledge, behavioural intentions, environmental affects, and the students' locus of…

The Impact of Individual Attitudinal and Organisational Variables on Workplace Environmentally Friendly Behaviours

OpenAIRE

Manika, D; Wells, VK; Gregory-Smith, D; Gentry, M

2015-01-01

Although research on corporate social responsibility (CSR) has grown steadily, little research has focused on CSR at the individual level. In addition, research on the role of environmental friendly organizational citizenship behaviors (OCBs) within CSR initiatives is scarce. In response to this gap and recent calls for further research on both individual and organizational variables of employees' environmentally friendly, or green, behaviors, this article sheds light on the influence of thes...

Testing of environmentally friendly lubricants for sheet metal forming

DEFF Research Database (Denmark)

Bay, Niels; Olsson, David Dam; Andreasen, Jan Lasson

2005-01-01

the authors have especially been involved in the development of a system of test methods for sheet metal forming and in testing of friction and limits of lubrication of new, environmentally friendly lubricants. An overview of the developed tests is presented together with selected results....

Green technological foresight on environmental friendly agriculture: Executive summary

DEFF Research Database (Denmark)

Borch, K.; Christensen, S.; Jørgensen, U.

2005-01-01

Risø and the co-operators have on behalf of the Forest and Nature Agency completed a technological foresight on environmentally friendly agriculture based on green technologies. A technological foresight is a systematic dialogue on how one prepares forfuture challenges, which have not yet manifes...

Selective leaching of Zn from spent alkaline batteries using environmentally friendly approaches.

Science.gov (United States)

Maryam Sadeghi, S; Vanpeteghem, Guillaumme; Neto, Isabel F F; Soares, Helena M V M

2017-02-01

The main aim of this work was to evaluate the possibility of using microwave or ultrasound to assist the efficient and selective leaching of Zn from spent alkaline batteries and compare the results with those obtained using the conventional method. Two different strategies were applied: acid leaching of a washed residue and alkaline leaching of the original residue. In both (acid and alkaline) approaches, the use of microwave- or ultrasound-assisted leaching increased the extraction of Zn compared with the best results obtained using conventional leaching [acid leaching (1.5mol/L H 2 SO 4 , 3h, 80°C), 90% of Zn extracted; alkaline leaching (6mol/L NaOH, 3h, 80°C), 42% of Zn extracted]. With acid leaching, 94% of the Zn was extracted using microwave-assisted leaching (1 cycle, 30s, 1mol/L H 2 SO 4 ), and 92% of the Zn was extracted using ultrasound-assisted leaching (2min, 0.1p, 20% amplitude, 1mol/L H 2 SO 4 ). Ultrasound-assisted leaching resulted in a more selective (Zn/Mn ratio of 5.1) Zn extraction than microwave-assisted leaching (Zn/Mn ratio of 3.5); both processes generated a concentrated Zn solution (⩾18.7g/L) with a purity (83.3% and 77.7%, respectively) that was suitable for electrowinning. With alkaline leaching, microwave- (1 cycle, 3 min, 4mol/L NaOH) and ultrasound-assisted (14min, 0.1p, 20% amplitude, 4mol/L NaOH) leaching extracted about 80% of the Zn and less than 0.01% of the Mn, which resulted in lesser concentrated Zn solutions (approximately 16.5g/L) but with high purity (>99.5%) that was suitable for the recovery of Zn by precipitation. The microwave- and ultrasound-assisted leaching strategies used in this work proved to be efficient and environmentally-friendly approaches for the extraction of Zn from spent alkaline residues since a concentrated Zn solution with adequate purity for subsequent Zn recovery was obtained using significantly decreased leaching times and concentrations of chemicals. Copyright © 2017 Elsevier Ltd. All rights

New environmentally-friendly antimicrobials and biocides from Andean and Mexican biodiversity.

Science.gov (United States)

Cespedes, Carlos L; Alarcon, Julio; Aqueveque, Pedro M; Lobo, Tatiana; Becerra, Julio; Balbontin, Cristian; Avila, Jose G; Kubo, Isao; Seigler, David S

2015-10-01

Persistent application of pesticides often leads to accumulation in the environment and to the development of resistance in various organisms. These chemicals frequently degrade slowly and have the potential to bio-accumulate across the food chain and in top predators. Cancer and neuronal damage at genomic and proteomic levels have been linked to exposure to pesticides in humans. These negative effects encourage search for new sources of biopesticides that are more "environmentally-friendly" to the environment and human health. Many plant or fungal compounds have significant biological activity associated with the presence of secondary metabolites. Plant biotechnology and new molecular methods offer ways to understand regulation and to improve production of secondary metabolites of interest. Naturally occurring crop protection chemicals offer new approaches for pest management by providing new sources of biologically active natural products with biodegradability, low mammalian toxicity and environmentally-friendly qualities. Latin America is one of the world's most biodiverse regions and provide a previously unsuspected reservoir of new and potentially useful molecules. Phytochemicals from a number of families of plants and fungi from the southern Andes and from Mexico have now been evaluated. Andean basidiomycetes are also a great source of scientifically new compounds that are interesting and potentially useful. Use of biopesticides is an important component of integrated pest management (IPM) and can improve the risks and benefits of production of many crops all over the world. Copyright © 2015 Elsevier Inc. All rights reserved.

Printed environmentally friendly supercapacitors with ionic liquid electrolytes on paper

Science.gov (United States)

Pettersson, F.; Keskinen, J.; Remonen, T.; von Hertzen, L.; Jansson, E.; Tappura, K.; Zhang, Y.; Wilén, C.-E.; Österbacka, R.

2014-12-01

Environmentally friendly supercapacitors are fabricated using commercial grade aluminum coated paper as a substrate and symmetrical activated carbon electrodes as large area electrodes. Different choline chloride-based eutectic solvents are used as electrolyte. These are inexpensive, environmentally friendly and have a larger operating window compared to that of water electrolytes. As the entire device is printed and the materials used are inexpensive, both small- and large-area power sources can be fabricated to be used in cheap, disposable and recyclable devices. Supercapacitors with different eutectic solvents are measured using cyclic charge-discharge and impedance spectroscopy measurements and compared to one widely used and one "green" imidazolium ionic liquid; EMIM:TFSI and EcoEng 212™, respectively. A mixture of ethylene glycol and choline chloride, Glyceline™, show the highest capacitance and power densities of the electrolytes being tested, including the imidazolium alternatives.

Eco-friendly polymer nanocomposites processing and properties

CERN Document Server

Thakur, Vijay Kumar

2015-01-01

This book contains precisely referenced chapters, emphasizing environment-friendly polymer nanocomposites with basic fundamentals, practicality and alternatives to traditional nanocomposites through detailed reviews of different environmental friendly materials procured from different resources, their synthesis and applications using alternative green approaches. The book aims at explaining basics of eco-friendly polymer nanocomposites from different natural resources and their chemistry along with practical applications which present a future direction in the biomedical, pharmaceutical and automotive industry. The book attempts to present emerging economic and environmentally friendly polymer nanocomposites that are free from side effects studied in the traditional nanocomposites. This book is the outcome of contributions by many experts in the field from different disciplines, with various backgrounds and expertises. This book will appeal to researchers as well as students from different disciplines. The co...

Child-Friendly Cities: A Place for Active Citizenship in Geographical and Environmental Education

Science.gov (United States)

Wilks, Judith

2010-01-01

This research was designed to investigate innovative practices associated with child-friendly cities initiatives in the United Kingdom and Italy and how civics and citizenship initiatives are being applied into practical programmes of exploration and learning in geography and environmental education. The Child-Friendly Cities Initiative (CFCI) of…

Cross-Cultural Investigation of Consumers’ Generations Attitudes Towards Purchase of Environmentally Friendly Products in Apparel Retail

OpenAIRE

Dabija Dan-Cristian; Chebeň Juraj; Lančarič Drahoslav

2017-01-01

Recent changes of the environment and in the society have altered consumers’ preferences and brought new concerns among local communities regarding environmental protection and organizations responsibility, the adoption of environmentally friendly strategies, as well as offering more sustainable products. Consumers tend to select retailers based on their focus on environmental friendly products and on various “green” strategies regarding waste disposal, package recycling, etc. This study aims...

Development of environmentally friendly briquettes

International Nuclear Information System (INIS)

Kleisa, K.; Lehmann, J.; Verfuss, F.; Simon, G.

1994-01-01

The DMT has developed an industrial briquette consisting of about 87% hardcoal, 7% molasses pulp and 6% hydration limestone which meets the requirements of the clean air authority as an environmentally friendly fuel for travelling grate boilers. In extensive tests in a 4.4 MW travelling grate boiler these briquettes with molasses and limestone additives proved to be particularly effective in terms of reducing sulphur dioxide emission in the flue gas. They exhibited good ignition and combustion behaviour as well as a considerable reduction in nitrogen oxide emission. In a large-scale test with 1000 t of briquettes in a 46.5 MW travelling grate furnace it proved possible to confirm the good combustion behaviour and the reduced emission of sulphur oxide and nitrogen oxide in the flue gas. (orig.) [de

Activism: A Strong Predictor of Proactive Environmentally Friendly Buying Behavior in Turkey

OpenAIRE

Ahu Ergen; Filiz Bozkurt; Caner Giray

2016-01-01

The market for environmentally friendly products in Turkey is growing, and marketing experts are trying to understand the behavior of the consumers in this market with the help of variables such as demographic factors, information, attitudes, values and life styles. This study analyzes the effects of environmental activism, environmental knowledge and the perceived seriousness of environmental problems on green buying behavior. The study involved 516 Turkish consumers, over eighteen years of ...

Development of environmentally friendly messages to promote longer durations of breastfeeding for already breastfeeding mothers.

Science.gov (United States)

Hamilton, Amanda E

2015-01-01

Durations of breastfeeding activity in the United States fall short of established recommendations by leading public health institutions. In response to this problem, this study sought to develop environmentally friendly messages to promote continued breastfeeding for moms already breastfeeding in order to help them reach recommended breastfeeding durations. Messages were successfully cultivated to encourage moms already breastfeeding to meet recommended breastfeeding durations. In addition, this study cultivated strategies by which to use environmentally friendly messages to urge mothers who still need to decide whether to breastfeed or formula feed to breastfeed, although this was not the purpose of the research. Avenues for future communication-based breastfeeding research were also elucidated. The Elaboration Likelihood Model serves as useful theory to assess the role of environmentally friendly messages in the promotion of continued breastfeeding.

Pre-Service Teacher Opinions about Eco-Friendly Person Activity Package Developed to Raise Environmental Awareness

Science.gov (United States)

Candan, Sevcan; Erten, Sinan

2015-01-01

In this study, the effectiveness of Eco-Friendly Person Activity Package developed in order to raise environmental awareness in pre-service teachers and enable them to be an example of an eco-friendly teacher for their future students, and the responses about Eco-Friendly Person Activity Package were investigated. The study was conducted on 75…

Production of environmentally friendly aerated concrete with required construction and operational properties

Directory of Open Access Journals (Sweden)

Tkach Evgeniya

2018-01-01

Full Text Available The purpose of these studies is to justify the feasibility of recycling different types of industrial waste instead of conventional expensive raw materials in production of environmentally friendly aerated concrete with required construction and operational properties. The impact of wastes from various industries on the environmental condition of affected areas, as well as the results of their environmental assessment were analyzed to determine whether these wastes could be used in production of high-performance building materials. The assessment of industrial wastes in aerated concrete production suggests that industrial wastes of hazard class IV can be recycled to produce aerated concrete. An environmentally friendly method for large-scale waste recycling, including a two-step environmentally sustainable mechanism, was developed. The basic quality indicators of the modified aerated concrete proved that the environmental safety could be enhanced by strengthening the structure, increasing its uniformity and improving thermal insulation properties. The modified non-autoclaved aerated concrete products with improved physical and operational properties were developed. They have the following properties: density – D700; class of concrete – B3.5; thermal transmittance coefficient – 0.143 W/(m·°C; frost resistance – F75.

Teaching Ecology to Children of Preschool Education to Instill Environmentally Friendly Behaviour

Science.gov (United States)

Ferreira, Maria Eduarda; Cruz, Catarina; Pitarma, Rui

2016-01-01

This qualitative study analyzes the results of a pedagogical and didactic experiment which was focused on the problem of teaching environmentally-friendly behaviours to young kindergarten children. It is essential to awaken children's curiosity and desire to know more about environmental issues in their regions so that children develop their own…

University of Illinois FRIENDS Children’s Environmental Health Center

Data.gov (United States)

Federal Laboratory Consortium — The FRIENDS Children's Environmental Health Center at the University of Illinois, Urbana-Champaign, was established in 2001 to investigate the interactive effects of...

Ukrainian realities of labeling of environmentally friendly products

Directory of Open Access Journals (Sweden)

I.M. Tsaruk

2016-12-01

Full Text Available The basis of life of any society is a safe environment that is not only the guarantee of welfare and quality of life, but also the guarantee of the further development of human civilization. That is why in the modern world the issue of the preservation of the natural environment is of special actuality. The gradual awareness by humanity of new threats (high degree of concentration of harmful industries; high level of resource and energy consumption; lack of modern environmental technologies; slow but inevitable degradation of the gene pool of a population due to the consumption of poor quality and in most cases harmful products, etc. forced the society to seek new approaches to socio-economic development and environmental management. One of such approaches is the introduction of ecological and organic labeling. Marking is a source of information about the purity, safety and quality of the products offered in the market; effective information mechanism, which is a kind of quality mark for the offered products. The current practice of ecological and organic labeling aimed at the increase of level consumer's awareness and the changing models of purchasing behavior in the direction of environmental protection. The feature of most marking systems of environmentally friendly and safe products is the obligation of compliance with the established requirements used by producers of raw materials and technologies taking into account their potential environmental impact. Labeling of ecologically clean and safe products is reducing the negative impact on the environment and on the human's health. It is the consequence of changes in the economic environment, namely: the improvement of socio-ethical requirements to production; the increasing level of integration of producers and service providers; the customer's satisfaction in varieties of products; globalization of economic space; reduction of time for development, standardization and production. Labeling is

Promoting energy-saving and environmentally friendly generation dispatching model in China: Phase development and case studies

DEFF Research Database (Denmark)

Ding, Yi; Yang, Hongliang

2013-01-01

Energy saving and environmental protection are important conditions for the sustainable development of Chinese economy. However current widely used generation scheduling model based on predefined production quota and tariff results in heavy energy consumption and severe environment pollution. From...... 2007, as concerns over energy shortage and environmental pollution, the Chinese authorities introduced the implementation of energy-saving generation dispatching model, which is an important approach to facilitating energy-saving and reduction of pollutant emission. The objective of implementing energy......-saving generation dispatching model is to prioritize the use of renewable energy resources and new power plants with high efficiency without compromising power system security and reliability. This paper analyzes the necessity and feasibility of implementing energy-efficient and environmentally friendly generation...

Environmental impact assessment and eco-friendly decision-making in civil structures.

Science.gov (United States)

Kim, Sang-Hyo; Choi, Moon-Seock; Mha, Ho-Seong; Joung, Jung-Yeun

2013-09-15

This study develops two useful procedures in performing an environmental-impact assessment. One is the advanced life-cycle assessment (LCA) method, which effectively tracks the flow of materials and considers the recycling and demolition of a civil structure. The other is an eco-friendly decision-making procedure, which may effectively apply when determining the prototype of a civil structure. The advanced LCA method differs from traditional LCA procedure, as it classifies the input material prior to the impact assessment. Classification work is performed to establish independent life-cycle stages for each material. The processes of recycling and demolition are appropriately added to the life-cycle stages. The impact assessment is performed separately for the materials, and results are aggregated at the end of the analysis. The eco-friendly decision-making procedure enables designers to choose an economical, and environmentally friendly, alternative during the planning phase of the construction project. This procedure rationally amalgamates economical value and environmental effects into a single indicator. The life cycle cost (LCC) of a structure can be analysed by using conventional LCC tools, whereas the environmental impact is estimated by LCA. The results from LCC and LCA are then integrated by using either a CO2 conversion method or an analytical hierarchy process (AHP). The CO2 conversion method presents the result as a monetary value, whereas the AHP presents the result as a non-dimensional value. A practical example using a steel box girder bridge and a pre-stressed concrete (PSC) box-girder bridge is also given in order to aid the understanding of the presented procedure. Copyright © 2013 Elsevier Ltd. All rights reserved.

Application of Green Environmentally Friendly Materials in Food Packaging

Directory of Open Access Journals (Sweden)

Jixia Li

2017-11-01

Full Text Available With social development, requirements on the spiritual and material life have increased. However, some environmental issues appear, for example, in food packaging. Application of environment-friendly materials in food packaging has been more and more attractive. This study analyses the characteristics of degradable food packaging material and the existing problems, proposes the manufacturing of food packaging with poly(lactic acid/nanocrystalline cellulose composite material, tests its thermal and mechanical properties, and applies it to the design of food packaging. The results demonstrate that the thermal and mechanical properties of the material could satisfy the requirements of food packaging and that the material is applicable to the design of food packaging in the future. This work provides a reference for the application of green, environment-friendly materials in the design of food packaging.

Environmentally Friendly Cleaners for Removing Tar from Metal Surfaces

Science.gov (United States)

2009-04-01

treatment plants that handle phosphate type solu- tions. The terms used by commercial vendors such as environmentally friendly, all natural, green, and...solvents used in relation to diesel fuel, and the procedure can also rank solvents quantitatively. Sacco (2004) has studied the blending of two plant ...other bituminous materials from industrial equipment surfaces. The composition is a mixture of a carrier monocyclic monoterpene and a nonionic

Application of Green Environmentally Friendly Materials in Food Packaging

OpenAIRE

Jixia Li

2017-01-01

With social development, requirements on the spiritual and material life have increased. However, some environmental issues appear, for example, in food packaging. Application of environment-friendly materials in food packaging has been more and more attractive. This study analyses the characteristics of degradable food packaging material and the existing problems, proposes the manufacturing of food packaging with poly(lactic acid)/nanocrystalline cellulose composite material, tests its therm...

Development and application of an environmentally friendly ductile alkali-activated composite

NARCIS (Netherlands)

Nedeljkovic, M.; Lukovic, M.; van Breugel, K.; Hordijk, D.A.; Ye, G.

2018-01-01

This paper presents a development of a ductile alkali-activated fly ash (FA) and ground granulated blast furnace slag (GBFS) based composite as an environmentally friendly material for structural concrete application. For this purpose, polyvinyl alcohol (PVA) fibres and sand aggregate were

Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

Science.gov (United States)

Pearman, B. P.; Calle, L. M.; Zhang, X.; Li, W.; Buhrow, J. W.; Johnsey, M. N.; Montgomery, E. L.; Fitzpatrick, L.; Surma, J. M.

2015-01-01

The NASA Kennedy Space Center's Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion indicators, inhibitors and self-healing agents. This allows the incorporation of autonomous corrosion control functionalities, such as corrosion detection and inhibition as well as the self-healing of mechanical damage, into coatings. This paper presents technical details on the characterization of inhibitor-containing particles and their corrosion inhibitive effects using electrochemical and mass loss methods. Three organic environmentally friendly corrosion inhibitors were encapsulated in organic microparticles that are compatible with desired coatings. The release of the inhibitors from the microparticles in basic solution was studied. Fast release, for immediate corrosion protection, as well as long-term release for continued protection, was observed. The inhibition efficacy of the inhibitors, incorporated directly and in microparticles, on carbon steel was evaluated. Polarization curves and mass loss measurements showed that, in the case of 2MBT, its corrosion inhibition effectiveness was greater when it was delivered from microparticles.

Preparation of nanoparticles with an environment-friendly approach.

Science.gov (United States)

Yao, Kefu; Peng, Zhen; Fan, Xiaolin

2009-01-01

Developing various approaches for preparing high performance materials has long been topics and tasks both for scientists and for engineers. Despite that many methods have been developed for preparing nanomaterials, developing simple and environment-friendly ways for preparing nanomaterials is very attractive. Here a simple approach of synthesizing Fe3O4 nanoparticles by arc-discharge submerging in water was reported. The results showed that by this method Fe3O4 nanoparticles can be synthesized at large scale. The as-prepared Fe3O4 nanoparticles exhibited uniform spherical shape and their diameters varied with arc-discharging parameters. The experimental results showed that the size of the synthesized Fe3O4 nanoparticles can be controlled through adjusting the processing parameters. Since no vacuum system has been used, the synthesizing process is greatly simplified. In addition, only cheap deionized water and industrial iron bar are used and no pollution or harmful byproducts are found in the synthesis process. It indicated that the present approach is a simple, low-cost and environment-friendly one for preparing nanoparticles.

Comparison of the microbiological quality of environmentally friendly and conventionally grown vegetables sold at retail markets in Korea.

Science.gov (United States)

Ryu, Jee-Hoon; Kim, Minju; Kim, Eun-Gyeong; Beuchat, Larry R; Kim, Hoikyung

2014-09-01

Fresh produce is usually eaten raw without cooking or heating, which may increase the probability of foodborne infection. The microbiological quality of 11 types of fresh, raw vegetables (romaine lettuce, sesame leaves, crown daisy, garlic chives, iceberg lettuce, cabbage, broccoli, leek, chili pepper, capsicum, and zucchini) purchased at retail markets in Iksan, Korea as affected by cultivation method (environmentally friendly vegetables [organic, pesticide-free, and low-pesticide vegetables] and conventionally grown vegetables) and harvest season was determined. Escherichia coli O157:H7 and Salmonella were not detected in all samples of vegetables tested. Aerobic mesophiles (>6 log cfu/g) were detected in environmentally friendly romaine lettuce and crown daisy and environmentally friendly and conventionally grown garlic chives, which also contained coliforms (>3 log cfu/g). Sesame leaf and crown daisy (regardless of cultivation method), as well as conventionally grown romaine lettuce and leek, contained >1 log cfu/g of E. coli. The overall microbiological quality of environmentally friendly and conventionally grown vegetables was not significantly different (P > 0.05). However, there were seasonal effects on populations of coliforms and generic E. coli on vegetables. The greatest numbers of microorganisms were isolated from environmentally friendly or conventionally grown vegetables purchased in winter. The vegetables, regardless of cultivation method or season, should be subjected to appropriate antimicrobial treatment to enhance their microbial safety. © 2014 Institute of Food Technologists®

Environmentally friendly joining of tubes by their ends

DEFF Research Database (Denmark)

Silva, Carlos M.A.; Nielsen, Chris Valentin; Alves, Luis M.

2015-01-01

This paper proposes an environmentally friendly joining process for connecting tubes by their ends that has the potential to replace current solutions based on fastened, crimped, welded, brazed or adhesive bonded joints. The process is based on a new type of tubular lap joint produced by local...... of deformation and the process feasibility window, and destructive testing to establish the working limits of tubular lap joints under different type of loading conditions. Results demonstrate that the proposed joining process is a flexible and cost-effective technology for connecting tubes by their ends...

Field Testing of Environmentally Friendly Drilling System

Energy Technology Data Exchange (ETDEWEB)

David Burnett

2009-05-31

The Environmentally Friendly Drilling (EFD) program addresses new low-impact technology that reduces the footprint of drilling activities, integrates light weight drilling rigs with reduced emission engine packages, addresses on-site waste management, optimizes the systems to fit the needs of a specific development sites and provides stewardship of the environment. In addition, the program includes industry, the public, environmental organizations, and elected officials in a collaboration that addresses concerns on development of unconventional natural gas resources in environmentally sensitive areas. The EFD program provides the fundamentals to result in greater access, reasonable regulatory controls, lower development cost and reduction of the environmental footprint associated with operations for unconventional natural gas. Industry Sponsors have supported the program with significant financial and technical support. This final report compendium is organized into segments corresponding directly with the DOE approved scope of work for the term 2005-2009 (10 Sections). Each specific project is defined by (a) its goals, (b) its deliverable, and (c) its future direction. A web site has been established that contains all of these detailed engineering reports produced with their efforts. The goals of the project are to (1) identify critical enabling technologies for a prototype low-impact drilling system, (2) test the prototype systems in field laboratories, and (3) demonstrate the advanced technology to show how these practices would benefit the environment.

Cross-Cultural Investigation of Consumers’ Generations Attitudes Towards Purchase of Environmentally Friendly Products in Apparel Retail

Directory of Open Access Journals (Sweden)

Dabija Dan-Cristian

2017-12-01

Full Text Available Recent changes of the environment and in the society have altered consumers’ preferences and brought new concerns among local communities regarding environmental protection and organizations responsibility, the adoption of environmentally friendly strategies, as well as offering more sustainable products. Consumers tend to select retailers based on their focus on environmental friendly products and on various “green” strategies regarding waste disposal, package recycling, etc. This study aims to highlight Romanian and Slovak consumers’ attitudes towards purchasing of goods from retailers that strive a clear focus on environmental responsibility and environmental friendly practices in apparel, footwear and sportswear retail. By means of a quantitative research based on a questionnaire administered to consumers of international retail chains with operations in both countries, the authors highlight differences in their perceptions and attitudes for buying green apparel, footwear and sportswear. Whereas Millennials and Gen Xers consumers in Romania and Slovakia believe that international apparel, footwear and sportswear retailers are less concerned about environmentally responsible behavior and the need of selling green products, Baby Boomers are more sensitive to such aspects and carefully select retailers according to their green strategy. This research provides specific findings about attitudes of different consumers’ generations within two emerging European countries (Romania, Slovakia.

Wider action plan and multidisciplinar approach could be a wining idea in creation of friendly environment.

Science.gov (United States)

Gojkovic-Bukvic, Natasa; Bukvic, Nenad

2012-01-01

Herein, we proposed planning of wide transdisciplinary actions, which bring a solution for economic activity such as transportation, strongly related to pollution output with possible repercussions on climate change and public health. To solve logistics problem by introduction of common intermodal policy, and creation of more friendly transport solution, it is possible to obtain sustainable development, climate change prevention, government policy, and regulation which are all related to human health and creation of health-supportive environment. This approach permits environmental and biological monitoring same as economic results measurement by key performance indicators. This approach implementing emerging scientific knowledge in environmental health science such as genetic epidemiology aimed at understanding how genomic variation impacts phenotypic expression and how genes interact with the environment at the population level with subsequent translation into practical information for clinicians as well as for public health policy creation.

Wider Action Plan and Multidisciplinary Approach Could Be a Wining Idea in Creation of Friendly Environment

International Nuclear Information System (INIS)

Gojkovic-Bukvic, N.; Gojkovic-Bukvic, N.; Bukvic, N.

2012-01-01

Herein, we proposed planning of wide trans disciplinary actions, which bring a solution for economic activity such as transportation, strongly related to pollution output with possible repercussions on climate change and public health. To solve logistics problem by introduction of common inter modal policy, and creation of more friendly transport solution, it is possible to obtain sustainable development, climate change prevention, government policy, and regulation which are all related to human health and creation of health-supportive environment. This approach permits environmental and biological monitoring same as economic results measurement by key performance indicators. This approach implementing emerging scientific knowledge in environmental health science such as genetic epidemiology aimed at understanding how genomic variation impacts phenotypic expression and how genes interact with the environment at the population level with subsequent translation into practical information for clinicians as well as for public health policy creation

Analysis of Environmental Friendly Library Based on the Satisfaction and Service Quality: study at Library “X”

Science.gov (United States)

Herdiansyah, Herdis; Satriya Utama, Andre; Safruddin; Hidayat, Heri; Gema Zuliana Irawan, Angga; Immanuel Tjandra Muliawan, R.; Mutia Pratiwi, Diana

2017-10-01

One of the factor that influenced the development of science is the existence of the library, which in this case is the college libraries. Library, which is located in the college environment, aims to supply collections of literatures to support research activities as well as educational for students of the college. Conceptually, every library now starts to practice environmental principles. For example, “X” library as a central library claims to be an environmental friendly library for practicing environmental friendly management, but the X library has not inserted the satisfaction and service aspect to the users, including whether it is true that environmental friendly process is perceived by library users. Satisfaction can be seen from the comparison between expectations and reality of library users. This paper analyzes the level of library user satisfaction with library services in the campus area and the gap between expectations and reality felt by the library users. The result of the research shows that there is a disparity between the hope of library management, which is sustainable and environmentally friendly with the reality in the management of the library, so that it has not given satisfaction to the users yet. The gap value of satisfaction that has the biggest difference is in the library collection with the value of 1.57; while for the smallest gap value is in the same service to all students with a value of 0.67.

Aqueous hybrid ion batteries - An environmentally friendly alternative for stationary energy storage?

Science.gov (United States)

Peters, Jens F.; Weil, Marcel

2017-10-01

Aqueous hybrid ion batteries (AHIB) are being promoted as an environmentally friendly alternative to existing stationary battery technologies. However, no quantification of their potential environmental impacts has yet been done. This paper presents a prospective life cycle assessment of an AHIB module and compares its performance with lithium-ion and sodium-ion batteries in two different stationary energy storage applications. The findings show that the claim of being an environmentally friendly technology can only be supported with some major limitations. While the AHIB uses abundant and non-toxic materials, it has a very low energy density and requires increased amounts of material for providing a given storage capacity. Per kWh of battery, results comparable to those of the alternative lithium- or sodium-ion batteries are obtained, but significantly higher impacts under global warming and ozone depletion aspects. The comparable high cycle life of the AHIB compensates this partially, requiring less battery replacements over the lifetime of the application. On the other hand, its internal inefficiencies are higher, what becomes the dominating factor when charging majorly fossil based electricity, making AHIB unattractive for this type of applications.

Agri‐environmental Policies to Meet Consumer Preferences in Japan: An Economic‐Biophysical Model Approach

Directory of Open Access Journals (Sweden)

Tetsuya Uetake

2014-08-01

Full Text Available Promoting environmentally friendly farming products is crucial to meeting consumer demand. Although governments implement policy measures to improve the environmental performance of the agriculture sector, theirimpacts are difficult to assess. This study analyses the performance of agri‐environmental policies in Japan, by using the OECD’s policy impact model and reference level framework. In particular, it identifies the environmental impacts of three simulated agri‐environmental policies based on farms’ characteristics. The results suggest that a policy mix of regulation and an incentive payment would reduce environmental impacts, suggesting that targeted approaches could improve the cost‐effectiveness of agri‐environmental policies.

Slip flow coefficient analysis in water hydraulics gear pump for environmental friendly application

International Nuclear Information System (INIS)

Yusof, A A; Wasbari, F; Zakaria, M S; Ibrahim, M Q

2013-01-01

Water hydraulics is the sustainable option in developing fluid power systems with environmental friendly approach. Therefore, an investigation on water-based external gear pump application is being conducted, as a low cost solution in the shifting effort of using water, instead of traditional oil hydraulics in fluid power application. As the gear pump is affected by fluid viscosity, an evaluation has been conducted on the slip flow coefficient, in order to understand to what extent the spur gear pump can be used with water-based hydraulic fluid. In this paper, the results of a simulated study of variable-speed fixed displacement gear pump are presented. The slip flow coefficient varies from rotational speed of 250 RPM to 3500 RPM, and provides volumetric efficiency ranges from 9 % to 97% accordingly

Use of natural gas, methanol, and ethanol fuel emulsions as environmentally friendly energy carriers for mobile heat power plants

Science.gov (United States)

Likhanov, V. A.; Lopatin, O. P.

2017-12-01

The need for using environmentally friendly energy carriers for mobile heat power plants (HPPs) is grounded. Ecologically friendly sources of energy, such as natural gas as well as renewable methyl and ethyl alcohols, are investigated. In order to develop, determine, and optimize the composition of environmentally friendly energy carriers for an HPP, the latter has been tested when working on diesel fuel (DF), compressed natural gas (CNG), and methanol and ethanol fuel emulsions (MFE, EFE). It has been experimentally established that, for the application of environmentally friendly energy carriers for a 4Ch 11.0/12.5 diesel engine of a mobile fuel and power plant, it is necessary to maintain the following ratio of components when working on CNG: 80% gas and 20% DF primer portion. When working on an alcohol mixture, emulsions of the following composition were used: 25% alcohol (methanol or ethanol), 0.5% detergent-dispersant additive succinimide C-5A, 7% water, and 67.5% DF. When this diesel passed from oil DF to environmentally friendly energy sources, it allowed for the reduction of the content of exhaust gases (EG) (1) when working on CNG with recirculation of exhaust gases (EGR) (recirculation was used to eliminate the increased amount of nitric oxides by using CNG): carbon black by 5.8 times, carbon dioxide by 45.9%, and carbon monoxide by 23.8%; (2) when working on MFE: carbon black by 6.4 times, nitrogen oxides by 29.6%, carbon dioxide by 10.1%, and carbon oxide by 47.6%; (3) when working on EFE: carbon black by 4.8 times; nitrogen oxides by 40.3%, carbon dioxide by 26.6%, and carbon monoxide by 28.6%. The prospects of use of environmentally friendly energy carriers in diesels of mobile HPPs, such as natural gas, ethanol, and methanol, has been determined.

Clean and Selective Catalytic C-H alkylation of Alkenes with Environmental friendly Alcohols

KAUST Repository

Poater, Albert; Vummaleti, Sai V. C.; Polo, Alfonso; Cavallo, Luigi

2016-01-01

Bearing the alkylation of alkene substrates using alcohol as solvent, catalysed by the cationic Ru-based catalyst [(C6H6)(PCy3)(CO)RuH]+, DFT calculations have been carried out to get mechanistic insights of such an environmental friendly reaction

Incentives for environmentally friendly vehicles. A report from the Environment and Health Protection Administration in Stockholm

Energy Technology Data Exchange (ETDEWEB)

Henriksson, Cecilia; Paedam, S. [Inregia AB, Stockholm (Sweden)

1999-11-01

This report deals with incentives for environmentally friendly vehicles. The report includes a description of the current status of these vehicles in Sweden, Stockholm County Council, and the City of Stockholm. A forecast of possible development of zero and low emission vehicles is carried out. The major obstacles which currently hinder a market for these vehicles are noted. In order to determine market readiness and factors which affect these firms' purchase of vehicles, interviews were carried out with private firms. This analysis indicates that institutional barriers in Sweden hinder zero and low emission vehicles, with laws and tax policies which offer conflicting signals. To follow international developments, these obstacles must be reduced. Therefore, it is important that Stockholm works to create a positive climate for environmentally friendly vehicles. This means that it is important that the policies recommended in this report are implemented with adequate intensity. Because knowledge about zero and low emission vehicles is limited, there is a need to produce factual information. Information can be spread to a larger group, but it is more cost effective to reach a group which is most likely to accept environmentally friendly vehicles. This could include companies with environmental profiles, or those who drive and use company cars. To increase the effectiveness of this information campaign, we suggest that the City also maintain a demonstration fleet with loaner cars for companies who wish to test these vehicles in daily operation before deciding whether or not to purchase them. The incentive package recommended for Stockholm includes offering parking rebates to various groups who park in the city centre; residents , commercial vehicles, and temporary visitors. For equity reasons, all groups should in practice be offered the rebate. To increase the positive effect of the incentive, environmentally friendly vehicles should also be allowed to drive in

Melon oil methyl ester: an environmentally friendly fuel

Directory of Open Access Journals (Sweden)

S.K. Fasogbon

2015-06-01

Full Text Available Demand for energy is growing across the globe due to the direct relationship between the well-being and prosperity of people and energy usage. However, meeting this growing energy demand in a safe and environmentally friendly manner is a key challenge. To this end, methyl esters (biodiesels have been and are being widely investigated as alternatives to fossil fuels in compression ignition engines. In this study, melon (Colocynthis Citrullus Lanatus oil was used to synthesize biodiesel (methyl ester using the transesterification method in the presence of a sodium hydroxide promoter. The emissions profile of the biodiesel was investigated by setting up a single-cylinder four-stroke air-cooled CI engine connected to a TD115-hydraulic dynamometer and an Eclipse Flue Gas Analyzer (FGA with model number EGA4 flue gas analyzer. The engine was run at engine speeds of 675, 1200 and 1900rpm for biodiesel/diesel blends at 21°C on a volume basis of 0/100(B0, 10/90(B10, 20/80(B20, 30/70(B30, 40/60(B40 and 50/50(B50. The test showed a downward trend in the emissions profile of the biodiesel, with remarkable reductions of about 55% in the dangerous-carbon monoxide exhaust gas pollutant and 33.3% in the unfriendly SOX from 100% diesel to B30-biodiesel concentration. Increasing the speed from 675 to 1200 and then to 1900 rpm also afforded further reductions in CO and SOX exhaust emissions. NOX however increased marginally by 2.1% from the same 100% diesel to the B30-biodiesel composition. Based on the remarkable reduction in CO and SOX and the marginal increase in NOX as the concentration of the biodiesel increased in the blends, the study concludes that melon oil methyl ester is an environmentally friendly fuel.

Aging in Context: Individual and Environmental Pathways to Aging-Friendly Communities-The 2015 Matthew A. Pollack Award Lecture.

Science.gov (United States)

Scharlach, Andrew E

2017-08-01

Reflecting the theme of the 2015 Gerontological Society of America (GSA) Annual Scientific Meeting, "Aging as a Lifelong Process," this paper examines intersections between aging processes and their environmental context, develops theory regarding constructive developmental processes and their environmental context, and considers potential implications for conceptualizing and creating aging-friendly communities. The first section examines the primary goals of aging-friendly communities, that is, promoting elder well-being. The second section explores the role of environmental pathways in fostering well-being throughout the lifecourse. The third section presents a new Process Model of Constructive Aging that identifies key developmental processes at the intersection of individual and environmental pathways. The final section considers potential implications for creating aging-friendly communities, including ways in which cities and towns can promote the ability of community members to live fully throughout their lives, and identifies some key conceptual and empirical challenges affecting the future of the field. © The Author 2017. Published by Oxford University Press on behalf of The Gerontological Society of America. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

Decision-Making Tool for Cost-Efficient and Environmentally Friendly Wood Mobilisation

OpenAIRE

Matevž Triplat; Peter Prislan; Nike Krajnc

2015-01-01

Background and Purpose: With development of forest management technologies, the efficiency of wood production was significantly improved, and thus the impact on forests has changed as well. The article presents a practical decision-making tool for selection of most suitable harvesting system, considering given terrain as well as expected soil conditions on harvesting sites. The decision-making tool should support cost-efficient and environmentally friendly mobilisation of wood. Materials a...

Environmentally friendly use of non-coal ashes in Sweden.

Science.gov (United States)

Ribbing, C

2007-01-01

The Swedish Thermal Engineering Research Institute (Värmeforsk) initiated an applied research program "Environmentally friendly use of non-coal ashes", in 2002. The program aims at increasing knowledge on the by-products of energy production and their application. The goal of formulating technical and environmental guidelines and assessments is a major point of the program, which is supported by about forty authorities and private organisations. The programme has been divided into four areas: recycling of ashes to forests, geotechnical applications, use in landfilling, and environmental aspects and chemistry. Among all results obtained, the following progress is shown: *Evidence for the positive effects of spreading ashes on forest growth. *A proposal for environmental guidelines on the utilisation of ashes in construction. *A handbook for using non-coal fly ashes in unpaved roads. *Technical and environmental assessments of MSWI bottom ashes in road construction. *Development of the use of ashes with municipal wastewater sludge as a cover for landfills and mine tailings. *Use of ashes from bio-fuels in concrete and replacement of cement in stoop mining. *A method to classify those by-products from combustion that have mirror entries in the EWC as a hazardous or non-hazardous compound. The Ash Programme has also made it possible to increase knowledge on ashes as valuable materials, on quality assurance and on markets for recovered materials.

Replacement of petroleum based hydraulic fluids with renewable and environmental friendly resource

International Nuclear Information System (INIS)

Wan Sani Wan Nik; Noraini Ali

2000-01-01

Rational self-interest and good environmental citizenship are forcing the development of renewable and environmentally acceptable hydraulic fluids. Fluids that are at least equivalent in performance plus biodegradable have been formulated in Europe and USA using vegetable oils as base stocks for innovative additive packages. While many of the differences in using vegetable based stocks in place of mineral oils have been adapted to by straightforward formulating changes, the oxidation stability of vegetable-based stock is still a challenging area. This work initiates the investigation in Malaysia in the use of environmentally friendly resource to replace partially the petroleum based hydraulic fluid. The study concentrates more in improving the oxidation stability of the vegetable based stocks. (Author)

Environmental Engineering Approaches toward Sustainable Management of Spider Mites.

Science.gov (United States)

Suzuki, Takeshi

2012-10-26

Integrated pest management (IPM), which combines physical, biological, and chemical control measures to complementary effect, is one of the most important approaches to environmentally friendly sustainable agriculture. To expand IPM, we need to develop new pest control measures, reinforce existing measures, and investigate interactions between measures. Continued progress in the development of environmental control technologies and consequent price drops have facilitated their integration into plant production and pest control. Here I describe environmental control technologies for the IPM of spider mites through: (1) the disturbance of photoperiod-dependent diapause by artificial light, which may lead to death in seasonal environments; (2) the use of ultraviolet radiation to kill or repel mites; and (3) the use of water vapor control for the long-term cold storage of commercially available natural enemies. Such environmental control technologies have great potential for the efficient control of spider mites through direct physical effects and indirect effects via natural enemies.

Characterization of Encapsulated Corrosion Inhibitors Containing Microparticles for Environmentally Friendly Smart Coatings

Science.gov (United States)

Pearman, Benjamin Pieter; Calle, Luz M.

2015-01-01

This poster presents the results obtained from experiments designed to evaluate the release properties, as well as the corrosion inhibition effectiveness, of several encapsulated corrosion inhibitors. Microencapsulation has been used in the development of environmentally friendly multifunctional smart coatings. This technique enables the incorporation of autonomous corrosion detection, inhibition and self-healing functionalities into many commercially available coating systems. Select environmentally friendly corrosion inhibitors were encapsulated in organic and inorganic pH-sensitive microparticles and their release in basic solutions was studied. The release rate results showed that the encapsulation can be tailored from fast, for immediate corrosion protection, to slow, which will provide continued long-term corrosion protection. The incorporation of several corrosion inhibitor release profiles into a coating provides effective corrosion protection properties. To investigate the corrosion inhibition efficiency of the encapsulated inhibitors, electrochemical techniques were used to obtain corrosion potential, polarization curve and polarization resistance data. These measurements were performed using the free as well as the encapsulated inhibitors singly or in combinations. Results from these electrochemical tests will be compared to those obtained from weight loss and other accelerated corrosion experiments.

Solution-Processed Environmentally Friendly Ag2S Colloidal Quantum Dot Solar Cells with Broad Spectral Absorption

Directory of Open Access Journals (Sweden)

Viktor A. Öberg

2017-10-01

Full Text Available A facile heat-up synthesis route is used to synthesize environmentally friendly Ag2S colloidal quantum dots (CQDs that are applied as light absorbing material in solid state p-i-n junction solar cell devices. The as-synthesized Ag2S CQDs have an average size of around 3.5 nm and exhibit broad light absorption covering ultraviolet, visible, and near infrared wavelength regions. The solar cell devices are constructed with a device architecture of FTO/TiO2/Ag2S CQDs/hole transport material (HTM /Au using a solution-processed approach. Different HTMs, N2,N2,N2′,N2′,N7,N7,N7′,N7′-octakis(4-methoxyphenyl-9,9′-spirobi(9H-fluorene-2,2′,7,7′ tetramine (spiro-OMeTAD, poly(3-hexylthiophene-2,5-diyl (P3HT, and poly((2,3-bis(3-octyloxyphenyl-5,8-quinoxalinediyl-2,5-thiophenediyl TQ1 are studied for maximizing the device photovoltaic performance. The solar cell device with P3HT as a hole transport material gives the highest performance and the solar cell exhibit broad spectral absorption. These results indicate that Ag2S CQD have high potential for utilization as environmentally friendly light absorbing materials for solar cell application and that the hole transport material is critical to maximize the solar cell photovoltaic performance.

Extrusion: An environmentally friendly process for PEMFC membrane elaboration

Energy Technology Data Exchange (ETDEWEB)

Sanchez, J.-Y.; Iojoiu, C.; Marechal, M. [LEPMI, UMR 5631 CNRS-INPG-UJF, ENSEEG, BP 75, F-38402, Saint Martin d' Heres (France); Chabert, F.; El Kissi, N. [Rheologie, UMR 5520 CNRS-INPG-UJF, ENSHMG, BP 53, F-38041, Grenoble (France); Salomon, J.; Mercier, R. [LMOPS UMR CNRS 5041, BP 24, F-69390 Vernaison (France); Piffard, Y. [CNRS Universite de Nantes, Institut des Materiaux Jean Rouxel, UMR 6502, BP 32229, F-44322, Nantes Cedex 3 (France); Galiano, H. [CEA, Le Ripault Research Center, BP 16, F-37260, Monts (France)

2007-12-31

The paper deals with the use of extrusion to process PEMFC filled and unfilled membranes. Several routes including the sulfonation of filled and unfilled extruded membranes and the extrusion of filled and unfilled ionomers are reported. Thanks to the use of selected water-soluble aid process plasticizers, acid and alkaline forms of sulfonated polyethersulfone were, for the first time, successfully extruded. The extrusion process did not lead to any degradation of the ionomer performances. Decreasing the membrane cost while using environmentally friendly elaboration conditions, it should be helpful to an industrial production. In addition, avoiding filler sedimentation it should allow homogeneous composite membranes to be obtained. (author)

Evaluation of environmentally friendly products for control of fungal diseases of grapes

OpenAIRE

Schilder, A.M.C.; Gillett, J.M.; Sysak, R.W.; Wise, J.C.

2002-01-01

Various environmentally friendly products were tested for efficacy in controlling powdery mildew, downy mildew, black rot, Phomopsis, and Botrytis bunch rot in grapes over several years. The products tested were: JMS stylet oil (paraffinic oil), Serenade (Bacillus subtilis), Croplife (citrus and coconut extract) + Plant food (foliar fertilizer), Armicarb (potassium bicarbonate), Elexa (chitosan), Milsana (giant knotweed extract), and AQ10 (Ampelomyces quisqua/is). JMS Stylet Oil, Armicarb, Se...

Development of high melting point, environmentally friendly solders, using the calphad approach

DEFF Research Database (Denmark)

Chidambaram, Vivek; Hald, John; Hattel, Jesper Henri

2008-01-01

An attempt has been made using the CALPHAD approach via Thermo-Calc to explore the various possible chemical compositions that adhere to the melting criterion i.e. 270-350 degrees C, required to replace the traditionally used high lead content solders for first level packaging applications. Vario...... tension have also been considered. Special focus has been given to toxicity related issues since the main ideology of looking for an alternative to high lead containing solders is not related to technical issues but due to environmental concerns.......An attempt has been made using the CALPHAD approach via Thermo-Calc to explore the various possible chemical compositions that adhere to the melting criterion i.e. 270-350 degrees C, required to replace the traditionally used high lead content solders for first level packaging applications. Various...... of promising solder alloy candidates. The ternary combinations that satisfied the primary solidification requirement were scrutinized taking into account the commercial interests i.e. availability, cost-effectiveness, recyclability and toxicity issues. Technical issues like manufacturability and surface...

Tagetes erecta mediated phytosynthesis of silver nanoparticles: an eco-friendly approach

Directory of Open Access Journals (Sweden)

ANIKET K. GADE

2012-11-01

Full Text Available Dhuldhaj UP, Deshmukh SD, Gade AK, Yashpal M, Rai MK. 2012. Tagetes erecta mediated phytosynthesis of silver nanoparticles:an eco-friendly approach. Nusantara Bioscience 4: 109-112. Nanotechnology is a multidisciplinary field having applications in the various fields like medicine, pharmacy, engineering and biotechnology. An important step in nanotechnology is to develop simple and eco-friendly method for the nanomaterial synthesis. Here we describe simple and eco-friendly method for synthesis of silver nanoparticles by extract of Tagetes erecta plant leaves. The phytosynthesis (synthesis by plant of silver nanoparticles was detected by color change from light-green to dark-brown. Synthesis of silver nanoparticles was confirmed by UV-Vis spectrophotometry, further characterization includes nanoparticle tracking analysis system (NTA (LM20 and transmission electron microscopy (TEM. TEM analysis confirms the synthesis of the polydispersed spherical silver nanoparticles of 20-50 n

Decision-Making Tool for Cost-Efficient and Environmentally Friendly Wood Mobilisation

Directory of Open Access Journals (Sweden)

Matevž Triplat

2015-06-01

Full Text Available Background and Purpose: With development of forest management technologies, the efficiency of wood production was significantly improved, and thus the impact on forests has changed as well. The article presents a practical decision-making tool for selection of most suitable harvesting system, considering given terrain as well as expected soil conditions on harvesting sites. The decision-making tool should support cost-efficient and environmentally friendly mobilisation of wood. Materials and Methods: The presented decision-making tool is based on ground bearing capacities (relevant environmental parameter and nominal ground pressure (harvesting system characteristics. Soil and terrain (slope characteristics were taken into account for selection of the most suitable harvesting system. Three-step methodological approach was suggested, where soil and terrain conditions were defined in first step, while harvesting system were described using wood process charts (“functiogramms” in second step. In final step ecological and technological requirements were matched. Results: To exemplify the three-step methodology, a decision-making tool was prepared for the three selected harvesting systems. The proposed harvesting systems differ in technological, ecological and economic aspects, but each is limited by at least one of the aspect. Conclusions: The decision-making tool in combination with the presented wood process charts (“functiogramms” can simplify and facilitate forest production planning, although it can also be used in case of unforeseen event e.g. changing of soil moisture, machinery failure and insufficient current capacities. Considering the envisaged quantities and types of forest wooden assortments, it is possible to use the decision-making tool for a basic selection of most appropriate harvesting systems. The main idea behind the suggested three step methodological approach is that forest workers can prepare individual decision

Possible consequences of changing to a more environmental-friendly steel production in China

International Nuclear Information System (INIS)

Kolstad, Julie Riise

2005-01-01

China is the world's biggest steel producer, the world's biggest steel consumer and the world's biggest polluter. The superpower is forced to change its steel production in a more environmental-friendly way, but necessary measures will be expensive; moreover, they will have consequences far past China's borders. The possible effects are elaborated in the article (ml)

Development of a method for environmentally friendly chemical peptide synthesis in water using water-dispersible amino acid nanoparticles

Directory of Open Access Journals (Sweden)

Fukumori Yoshinobu

2011-08-01

Full Text Available Abstract Due to the vast importance of peptides in biological processes, there is an escalating need for synthetic peptides to be used in a wide variety of applications. However, the consumption of organic solvent is extremely large in chemical peptide syntheses because of the multiple condensation steps in organic solvents. That is, the current synthesis method is not environmentally friendly. From the viewpoint of green sustainable chemistry, we focused on developing an organic solvent-free synthetic method using water, an environmentally friendly solvent. Here we described in-water synthesis technology using water-dispersible protected amino acids.

Shrinking the food-print: A qualitative study into consumer perceptions, experiences and attitudes towards healthy and environmentally friendly food behaviours.

Science.gov (United States)

Hoek, A C; Pearson, D; James, S W; Lawrence, M A; Friel, S

2017-01-01

Internationally, there is increasing recognition of the importance of multilevel policies and actions that address healthy and environmentally friendly food behaviours. However it is not yet clear which actions are most suitable to support consumers to adopt both behaviours concurrently. To this end, we undertook a qualitative study to assess consumer perceptions, experiences and attitudes towards healthy and environmentally friendly foods and four target behaviours: reducing overconsumption of food beyond energy needs, reducing consumption of low-nutrient energy dense foods, eating less animal- and more plant-derived foods, and reducing food waste. Online in-depth interviews were held with 29 Australian food shoppers representing different levels of involvement with health and environment in daily food choices. The results indicate that compared to health, the relationship between food and the environment is rarely considered by consumers. The four target food behaviours were primarily associated and motivated by an impact on health, except for not wasting foods. Participants had the most positive attitude and highest motivation for eating less processed and packaged foods, mostly to avoid excessive packaging and 'chemicals' in foods. This was followed by the behaviours reducing food waste and overconsumption. Conversely, there was a predominantly negative attitude towards, and low motivation for, eating less animal-derived products and more plant based foods. Overall, consumers found a joined concept of healthy and environmentally friendly foods an acceptable idea. We recommend that health should remain the overarching principle for policies and actions concerned with shifting consumer behaviours, as this personal benefit appears to have a greater potential to support behaviour change. Future consumer focused work could pay attention to framing behavioural messages, providing intermediate behavioural goals, and a multiple target approach to change habitual

Environmentally Friendly Plasma-Treated PEDOT:PSS as Electrodes for ITO-Free Perovskite Solar Cells.

Science.gov (United States)

Vaagensmith, Bjorn; Reza, Khan Mamun; Hasan, Md Nazmul; Elbohy, Hytham; Adhikari, Nirmal; Dubey, Ashish; Kantack, Nick; Gaml, Eman; Qiao, Qiquan

2017-10-18

Solution processed poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) transparent electrodes (TEs) offer great potential as a low cost alternative to expensive indium tin oxide (ITO). However, strong acids are typically used for enhancing the conductivity of PEDOT:PSS TEs, which produce processing complexity and environmental issues. This work presents an environmentally friendly acid free approach to enhance the conductivity of PEDOT:PSS using a light oxygen plasma treatment, in addition to solvent blend additives and post treatments. The plasma treatment was found to significantly reduce the sheet resistance of PEDOT:PSS TEs from 85 to as low as 15 Ω sq -1 , which translates to the highest reported conductivity of 5012 S/cm for PEDOT:PSS TEs. The plasma treated PEDOT:PSS TE resulted in an ITO-free perovskite solar cell efficiency of 10.5%, which is the highest reported efficiency for ITO-free perovskite solar cells with a PEDOT:PSS electrode that excludes the use of acid treatments. This research presents the first demonstration of this technology. Moreover, the PEDOT:PSS TEs enabled better charge extraction from the perovskite solar cells and reduced hysteresis in the current density-voltage (J-V) curves.

Corrosion-Activated Micro-Containers for Environmentally Friendly Corrosion Protective Coatings

Science.gov (United States)

Li, Wenyan; Buhrow, J. W.; Zhang, X.; Johnsey, M. N.; Pearman, B. P.; Jolley, S. T.; Calle, L. M.

2016-01-01

This work concerns the development of environmentally friendly encapsulation technology, specifically designed to incorporate corrosion indicators, inhibitors, and self-healing agents into a coating, in such a way that the delivery of the indicators and inhibitors is triggered by the corrosion process, and the delivery of self-healing agents is triggered by mechanical damage to the coating. Encapsulation of the active corrosion control ingredients allows the incorporation of desired autonomous corrosion control functions such as: early corrosion detection, hidden corrosion detection, corrosion inhibition, and self-healing of mechanical damage into a coating. The technology offers the versatility needed to include one or several corrosion control functions into the same coating.The development of the encapsulation technology has progressed from the initial proof-of-concept work, in which a corrosion indicator was encapsulated into an oil-core (hydrophobic) microcapsule and shown to be delivered autonomously, under simulated corrosion conditions, to a sophisticated portfolio of micro carriers (organic, inorganic, and hybrid) that can be used to deliver a wide range of active corrosion ingredients at a rate that can be adjusted to offer immediate as well as long-term corrosion control. The micro carriers have been incorporated into different coating formulas to test and optimize the autonomous corrosion detection, inhibition, and self-healing functions of the coatings. This paper provides an overview of progress made to date and highlights recent technical developments, such as improved corrosion detection sensitivity, inhibitor test results in various types of coatings, and highly effective self-healing coatings based on green chemistry. The NASA Kennedy Space Centers Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion

Development of environmentally friendly universal controller. Data and materials; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho. Shiryohen

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances, and data and materials on them were compiled into this volume. It covers the specifications (Versions 0.6 and 0.51) of a newly developed two-way controller protocol, the specification (Version 0.1) of two-way remote control IrDA-C communication unit hardware, an infrared communication protocol IrDa Control, and the like. It also accommodates information collected through surveys of technological trends as reflected in technical literature, Internet home pages, catalogs, and the like, concerning the user-friendliness of electrical home appliances, remote control, domestic consumption of electric power, and the like. Also covered is the result of surveys of patents involving environmentally friendly UC related technologies, namely, Japanese patents (from applications made in 1979 through disclosures made in 1998) and U.S. patents (registrations made in 1982 and thereafter). Furthermore, it contains the result of surveys of actualities of domestic use conducted for the purpose of clarifying the effect of environmentally friendly UC introduction, how such UCs are being accepted by the public, and the conditions that should be satisfied for their popularization. (NEDO)

Development of environmentally friendly universal controller. Data and materials; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho. Shiryohen

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances, and data and materials on them were compiled into this volume. It covers the specifications (Versions 0.6 and 0.51) of a newly developed two-way controller protocol, the specification (Version 0.1) of two-way remote control IrDA-C communication unit hardware, an infrared communication protocol IrDa Control, and the like. It also accommodates information collected through surveys of technological trends as reflected in technical literature, Internet home pages, catalogs, and the like, concerning the user-friendliness of electrical home appliances, remote control, domestic consumption of electric power, and the like. Also covered is the result of surveys of patents involving environmentally friendly UC related technologies, namely, Japanese patents (from applications made in 1979 through disclosures made in 1998) and U.S. patents (registrations made in 1982 and thereafter). Furthermore, it contains the result of surveys of actualities of domestic use conducted for the purpose of clarifying the effect of environmentally friendly UC introduction, how such UCs are being accepted by the public, and the conditions that should be satisfied for their popularization. (NEDO)

Environmentally friendly disinfectant: Production, disinfectant action and efficiency

Directory of Open Access Journals (Sweden)

Čekerevac Milan I.

2006-01-01

Full Text Available Silver is a known disinfectant from ancient times, and it has been widely used for various purposes: for food and water disinfection, curing of wounds and as a universal antibiotic for a wide spectrum of diseases - until the Second World War and the discovery of penicillin. Until recently, it was assumed that silver, being a heavy metal, was toxic for humans and living beings. However, the newest research provides facts that the usage of silver, even for drinking water disinfection, is benign if it is added in small concentrations (in parts per billion. It has been shown in the newer scientific and technical literature that silver in colloidal form is a powerful (secondary disinfectant for drinking water, that it can be effectively used for the disinfection of water containers including swimming pools, installations in food industry, medicine, etc. Particularly, it has been shown that colloidal silver combined with hydrogen peroxide shows synergism having strong bactericidal and antiviral effects. The combination can be successfully used as a disinfectant in agriculture, food production and medicine. The original electrochemical process of production, the mechanism of physical-chemical reactions in that process and the mechanism of the antiseptic affect of the environmentally friendly disinfectant, based on the synergism of colloidal silver and hydrogen peroxide and the activity of electrochemically activated water, is shown. The starting solution was anolyte, obtained in electrochemical activation by water electrolysis of a highly diluted solution of K-tartarate in demineralized water (5.5-1CT4 M. The problem of electrolysis of very dilute aqueous solutions in membrane cells was particularly treated. It was shown that the efficiency of the electrolysis depends on the competition between the two processes: the rates of the processes of hydrogen and oxygen generation at the electrodes and the process of diffusion of hydrogen and hydroxyl ions

Graphene oxide-loaded shortening as an environmentally friendly heat transfer fluid with high thermal conductivity

Directory of Open Access Journals (Sweden)

Vongsetskul Thammasit

2017-01-01

Full Text Available Graphene oxide-loaded shortening (GOS, an environmentally friendly heat transfer fluid with high thermal conductivity, was successfully prepared by mixing graphene oxide (GO with a shortening. Scanning electron microscopy revealed that GO particles, prepared by the modified Hummer’s method, dispersed well in the shortening. In addition, the latent heat of GOS decreased while their viscosity and thermal conductivity increased with increasing the amount of loaded GO. The thermal conductivity of the GOS with 4% GO was higher than that of pure shortening of ca. three times, from 0.1751 to 0.6022 W/mK, and increased with increasing temperature. The GOS started to be degraded at ca. 360°C. After being heated and cooled at 100°C for 100 cycles, its viscosity slightly decreased and no chemical degradation was observed. Therefore, the prepared GOS is potentially used as environmentally friendly heat transfer fluid at high temperature.

Achievement report for fiscal 1998. Development of environmentally friendly universal controller; 1998 nendo kankyo taio universal controller no kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-05-01

Research and development was carried out for an 'environmentally friendly universal controller (UC)' which would be 'user-friendly and energy-saving' when used with electrical home appliances. An environmentally friendly UC is a remote controller which utilizes an infrared two-way communication function and becomes capable of dealing with any appliance upon downloading remote control information from the appliance involved. Studies were conducted for the development of controller hardware and software therefor and for the development of electrical home appliances to correspond to their specifications. In relation with energy conservation, studies centered about reduction in power consumption while on standby and unnecessary power consumption. As the result, an environmentally friendly UC protocol was newly developed and, based on the protocol, plural numbers of controllers, appliances, and network gateways were tentatively fabricated, and were examined for their function, behavior, and operational interchangeability. Systems aiming at reducing power consumption while on standby and unnecessary power consumption were built by way of experiment, and were checked for performance. It was then concluded that a reduction of several billion kWh might be achieved. (NEDO)

An eco-friendly approach for sodium chloride free cotton dyeing

International Nuclear Information System (INIS)

Umer, T.

2014-01-01

Present study was conducted with an aim to develop an environmental friendly method of dyeing cotton as an alternative to standard reactive dyeing process that requires high level of salt. When dyeing was carried out in the absence of sodium chloride (NaCl), an extremely lighter depth of shade was experienced, and hence this particular research was focused on the reduction of the total colour difference (AE) to a minimum level. Instead of adding any other chemical or any additional process like cationization, salt-free reactive dyeing was carried out by varying three common process parameters (dyes, alkali, and process time) to achieve required depth of shade. The results obtained were compared with those of conventionally dyed fabrics in terms of depth of shade (AL), total colour difference (AE), washing fastness, and rubbing fastness. The results were found to be promising and comparable to those dyed with using NaCl. Moreover, the investigated method showed a significant reduction of Total Dissolved Solids (TDS) and Electrical Conductivity (EC) in the wastewater, and thus proved to be an environment friendly process. (author)

Environmentally friendly health care food services: a survey of beliefs, behaviours, and attitudes.

Science.gov (United States)

Wilson, Elisa D; Garcia, Alicia C

2011-01-01

There is increasing global interest in sustainability and the environment. A hospital/health care food service facility consumes large amounts of resources; therefore, efficiencies in operation can address sustainability. Beliefs, attitudes, and behaviours about environmentally friendly practices in hospital/health care food services were explored in this study. Questionnaires addressed environmentally friendly initiatives in building and equipment, waste management, food, and non-food procurement issues. The 68 participants included hospital food service managers, clinical dietitians, dietary aides, food technicians, and senior management. Data analysis included correlation analysis and descriptive statistics. Average scores for beliefs were high in building and equipment (90%), waste management (94%), and non-food procurement (87%), and lower in food-related initiatives (61%) such as buying locally, buying organic foods, buying sustainable fish products, and reducing animal proteins. Average positive scores for behaviours were positively correlated with beliefs (waste management, p=0.001; food, p=0.000; non-food procurement, p=0.002). Average positive scores for attitude in terms of implementing the initiatives in health care were 74% for building and equipment, 81% for waste management, 70% for non-food procurement, and 36% for food. The difference in food-related beliefs, behaviours, and attitudes suggests the need for education on environmental impacts of food choices. Research is recommended to determine facilitators and barriers to the implementation of green strategies in health care. As food experts, dietitians can lead changes in education, practice, and policy development.

Going green with eco-friendly dentistry.

Science.gov (United States)

Avinash, Bhagyalakshmi; Avinash, B S; Shivalinga, B M; Jyothikiran, S; Padmini, M N

2013-07-01

Eco-friendly dentistry is currently transforming the medical and dental field to decrease its affect on our natural environment and reduce the amount of waste being produced. Eco-friendly dentistry uses a sustainable approach to encourage dentists to implement new strategies to try and reduce the energy being consumed and the large amount of waste being produced by the industry. Many reasonable, practical and easy alternatives do exist which would reduce the environmental footprint of a dental office were it to follow the 'green' recommendations. Dentist should take a leading role in the society by implementing 'green' initiatives to lessen their impact on the environment. This article provides a series of 'green' recommendations that dentists around the world can implement to become a leading Stewards of the environment.

Eco-friendly Development Of Industry

International Nuclear Information System (INIS)

An, Gi Cheol; Park, Hun; Lee, Dong Jin; Ryu, Sang Hui

1998-02-01

This book reports eco-friendly development of industry, which has summary on bring up the issue and research way and system of research. It deals with current state of affairs on eco-friendly development of industry and the case of developed countries such as necessity and meaning of eco-friendly development industry, prospect and change of the tendency, environmental issue by field in Korea like the steel industry, nonferrous metal industry, auto industry, and cement industry and general policy for eco-friendly development of industry.

Environmentally friendly ionic liquid-in-water microemulsions for extraction of hydrophilic and lipophilic components from Flos Chrysanthemi.

Science.gov (United States)

Chen, Jue; Cao, Jun; Gao, Wen; Qi, Lian-Wen; Li, Ping

2013-10-21

Ionic liquids (ILs) have numerous chemical applications as environmentally green solvents that are extending into microemulsion applications. In this work, a novel benign IL-in-water microemulsion system modified by an IL surfactant has been proposed for simultaneous extraction of hydrophilic and lipophilic constituents from Flos Chrysanthemi (Chrysanthemum morifolium). Constituents were analyzed by rapid-resolution liquid chromatography coupled with quadrupole time-of-flight mass spectrometry. A mixture-design approach was used to optimize the IL surfactant and the IL oil phase in the microemulsion system. Microemulsions consisting of 6.0% 1-dodecyl-3-methylimidazolium hydrogen sulfate, 0.1% 1-vinyl-3-methylimidazolium hexafluorophosphate and 93.9% water offered the acceptable extract efficiency that are comparable to or even better than conventional volatile organic solvents. This assay was fully validated with respect to the linearity of response (r(2) > 0.999 over two orders of magnitude), precision (intra-RSD < 0.49 and inter-day RSD < 2.21), and accuracy (recoveries ranging from 93.73% to 101.84%). The proposed IL-in-water microemulsion method provided an environmentally friendly alternative for efficient extraction of compounds from Flos Chrysanthemi and could be extended to complex environmental and pharmaceutical samples.

Environmentally friendly synthesis of organic-soluble silver nanoparticles for printed electronics

International Nuclear Information System (INIS)

Lee, Kwi Jong; Jun, Byung Ho; Choi, Junrak; Lee, Young Il; Joung, Jaewoo; Oh, Yong Soo

2007-01-01

In this study, we attempted to synthesize organic-soluble silver nanoparticles in the concentrated organic phase with an environmentally friendly method. The fully organic phase system contains silver acetate as a silver precursor, oleic acid as both a medium and a capping molecule, and tin acetate as a reducing agent. Monodisperse silver nanoparticles with average diameters of ca. 5 nm can be easily synthesized at large scale. Only a small usage of tin acetate ( 90%). Also, it was investigated that the residual tin atom does not exist in the synthesized silver nanoparticles. This implied that tin acetate acts as a reducing catalyst

Environmentally friendly synthesis of highly monodisperse biocompatible gold nanoparticles with urchin-like shape.

Science.gov (United States)

Lu, Lehui; Ai, Kelong; Ozaki, Yukihiro

2008-02-05

We report a facile and environmentally friendly strategy for high-yield synthesis of highly monodisperse gold nanoparticles with urchin-like shape. A simple protein, gelatin, was first used for the control over shape and orientation of the gold nanoparticles. These nanoparticles, ready to use for biological systems, are promising in the optical imaging-based disease diagnostics and therapy because of their tunable surface plasmon resonance (SPR) and excellent surface-enhanced Raman scattering (SERS) activity.

Release Properties and Electrochemical Characterization of Encapsulated Corrosion Inhibitors for Environmentally Friendly Smart Coatings

Science.gov (United States)

Pearman, B. P.; Calle, L. M.; Zhang, X.; Li, W.; Buhrow, J. W.; Johnsey, M. N.; Montgomery, E. L.; Fitzpatrick, L.; Surma, J. M.

2015-01-01

The NASA Kennedy Space Center's Corrosion Technology Lab at the Kennedy Space Center in Florida, U.S.A. has been developing multifunctional smart coatings based on the microencapsulation of environmentally friendly corrosion indicators, inhibitors and self-healing agents. This allows for the incorporation of autonomous corrosion control functionalities, such as corrosion detection and inhibition as well as the self-healing of mechanical damage, into coatings. This paper presents technical details on the characterization of inhibitor-containing particles and their corrosion inhibitive effects using electrochemical and mass loss methods. Three organic environmentally friendly corrosion inhibitors were encapsulated in organic microparticles that are compatible with desired coatings. The total inhibitor content and the release of one of the inhibitors from the microparticles in basic solution was measured. Particles with inhibitor contents of up 60 wt% were synthesized. Fast release, for immediate corrosion protection, as well as long-term release for continued protection, was observed. The inhibition efficacy of the inhibitors, both as the pure materials and in microparticles, on carbon steel was evaluated. Polarization curves and mass loss measurements showed that, in the case of 2MBT, its corrosion inhibition effectiveness was greater when it was delivered from microparticles.

The development of environmental assessment tools to support the creation of dementia friendly care environments: Innovative practice.

Science.gov (United States)

Waller, Sarah; Masterson, Abigail; Evans, Simon C

2017-02-01

The need for more dementia friendly design in hospitals and other care settings is now widely acknowledged. Working with 26 NHS Trusts in England as part of a Department of Health commissioned programme, The King's Fund developed a set of overarching design principles and an environmental assessment tool for hospital wards in 2012. Following requests from other sectors, additional tools were developed for hospitals, care homes, health centres and housing with care. The tools have proven to be effective in both disseminating the principles of dementia friendly design and in enabling the case to be made for improvements that have a positive effect on patient outcomes and staff morale. This paper reports on the development, use and review of the environmental assessment tools, including further work that is now being taken forward by The Association for Dementia Studies, University of Worcester.

Perceived quality, perceived risk and customer trust affecting customer loyalty of environmentally friendly electronics products

Directory of Open Access Journals (Sweden)

Lalinthorn Marakanon

2017-01-01

Full Text Available At present, industrial business competition causes producers to be aware of quality, price, and variety in developing new products to meet the consumers' needs. This research reviewed the literature on green marketing and proposes a new conceptual framework of customer loyalty. It uses four constructs—perceived quality, perceived risk, customer trust, and customer loyalty—in the context of environmentally friendly electronics products in Thailand. This research employed an empirical study using the questionnaire survey method to verify the hypotheses. Data were obtained from 420 consumers who bought and used environmentally friendly electronic products, particularly mobile phones, computers, and laptops using a purposive sampling method. The data were analyzed using confirmatory factor analysis (CFA and structural equation modeling (SEM. The results showed that perceived risk and customer trust had a direct effect on customer loyalty while perceived quality had an indirect effect on customer loyalty via customer trust. Furthermore, perceived quality had direct effects on perceived risk and customer trust. The results from the final SEM model were used to confirm the proposed relationships among the variables.

Water-soluble resist for environmentally friendly lithography

Science.gov (United States)

Lin, Qinghuang; Simpson, Logan L.; Steinhaeusler, Thomas; Wilder, Michelle; Willson, C. Grant; Havard, Jennifer M.; Frechet, Jean M. J.

1996-05-01

This paper describes an 'environmentally friendly,' water castable, water developable photoresist system. The chemically amplified negative-tone resist system consists of three water-soluble components: a polymer, poly(methyl acrylamidoglycolate methyl ether), [poly(MAGME)]; a photoacid generator, dimethyl dihydroxyphenylsulfonium triflate and a crosslinker, butanediol. Poly(MAGME) was synthesized by solution free radical polymerization. In the three-component resist system, the acid generated by photolysis of the photoacid generator catalyzes the crosslinking of poly(MAGME) in the exposed regions during post-exposure baking, thus rendering the exposed regions insoluble in water. Negative tone relief images are obtained by developing with pure water. The resist is able to resolve 1 micrometer line/space features (1:1 aspect ratio) with an exposure dose of 100 mJ/cm2 at 248 nm. The resist can be used to generate etched copper relief images on printed circuit boards using aqueous sodium persulfate as the etchant. The crosslinking mechanism has been investigated by model compound studies using 13C NMR. These studies have revealed that the acid catalyzed reaction of the poly(MAGME) with butanediol proceeds via both transesterification and transacetalization (transaminalization) reactions at low temperatures, and also via transamidation at high temperatures.

Promoting energy-saving and environmentally friendly generation dispatching model in China: Phase development and case studies

International Nuclear Information System (INIS)

Ding, Yi; Yang, Hongliang

2013-01-01

Energy saving and environmental protection are important conditions for the sustainable development of Chinese economy. However current widely used generation scheduling model based on predefined production quota and tariff results in heavy energy consumption and severe environment pollution. From 2007, as concerns over energy shortage and environmental pollution, the Chinese authorities introduced the implementation of energy-saving generation dispatching model, which is an important approach to facilitating energy-saving and reduction of pollutant emission. The objective of implementing energy-saving generation dispatching model is to prioritize the use of renewable energy resources and new power plants with high efficiency without compromising power system security and reliability. This paper analyzes the necessity and feasibility of implementing energy-efficient and environmentally friendly generation scheduling models in China. The institutional and technical barriers impeding the implementation of energy-saving generation dispatching model are identified. The development of advanced energy-saving generation scheduling models towards competitive market models and phased planning programs are emphasized in this paper. The effectiveness and experience of provinces piloted energy-saving generation dispatching projects are also discussed. - Highlights: ► Introducing problems of current power generation scheduling model in China. ► Discussing necessity of implementing ESGD model and corresponding barriers. ► Proposing phased planning programs for developing ESGD models. ► Discussing the effectiveness and experience of provinces piloted ESGD projects

Pricing of environmental friendly herbicides appropriate for sustainable agriculture, A case study: wheat farmers in Khorasan Razavi province

Directory of Open Access Journals (Sweden)

Mohammad Ghorbani

2016-04-01

Full Text Available Awareness of wheat farmers’ personal preferences towards environmental issues and weed types is important in pricing bioherbicides for sustainable weed management and could consequently be a fundamental guide to agricultural authorities and policy-makers. In the present study, a survey was carried out by using data collected from 180 wheat farmers of Korasan Razavi province during 2008, together with hedonic pricing method. The role of environmental qualitative factors and weed type on pricing environmental-friendly herbicides on the basis of “willingness to pay” was studied. Results from the estimation of hedonic pricing method indicated that reduction of water pollution, human health risk, farmers information about negative effects of chemical herbicides and the virtual variable of weed type had significant effects on pricing environmental friendly herbicides. Variables of soil pollution and weed perenniality had no significant effects on pricing herbicide applicable to sustainable agricultural systems. Based on the results of this study, possibilities of using bioherbicide or less pollutant herbicides and also the rate of farmers willingness to pay for alternatives in the region are important factors recommended for additional studies

An integral approach to corporate environmentalism and its application to a country in transition

Directory of Open Access Journals (Sweden)

Domen Bajde

2012-06-01

Full Text Available In this paper we propose and implement an integral approach to corporate environmentalism. Our integral model accounts not only for corporate environmentalism motivation and conception but also for corporate environmentalism mode and speed of implementation. A broad range of identified corporate environmentalism dimensions helps characterize fi ve basic groups of companies we propose to name “non-compliers,” “legalistic incrementalists,” “greenwashers,” “incremental innovators,” and “radical innovators.” We then seek to empirically verify the soundness of the proposed integral typology by surveying a large sample of Slovenian manufacturing companies. Maximum likelihood probit estimation, exploratory factor analysis, cluster analysis andbinary logistic modeling are used in the empirical analysis. Our main conclusions are twofold: (1 The integral approach to corporate environmentalism works: in the framework of a small open transitional economy, the model differentiates wellamong different groups of companies. (2 There are no radical innovators among Slovenian companies, and less than one third of the companies are actively thinking and acting in line of environment-friendly processes and products. This fi nding can be partially explained by the fact that Slovenian economy still has some transitional characteristics.

Isomerization of glucose into fructose by environmentally friendly Fe/β zeolite catalysts.

Science.gov (United States)

Xu, Siquan; Zhang, Lei; Xiao, Kehao; Xia, Haian

2017-06-29

Herein, the environmentally friendly Fe/β zeolite for glucose isomerization to fructose in aqueous media was reported for the first time. The effects of various reaction conditions including reaction temperature, reaction time, catalyst dosage, etc. on the isomerization reaction over Fe/β zeolite were studied in detail. Under the optimized conditions, yield of fructose higher than 20% were obtained. Moreover, the Fe/β zeolite catalysts were stable and remained constant catalytic activity after five consecutive runs. The possible active Fe species for isomerization of glucose in Fe/β zeolite is also discussed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Biodegradation performance of environmentally-friendly insulating oil

Science.gov (United States)

Yang, Jun; He, Yan; Cai, Shengwei; Chen, Cheng; Wen, Gang; Wang, Feipeng; Fan, Fan; Wan, Chunxiang; Wu, Liya; Liu, Ruitong

2018-02-01

In this paper, biodegradation performance of rapeseed insulating oil (RDB) and FR3 insulating oil (FR3) was studied by means of ready biodegradation method which was performed with Organization for Economic Co-operation and Development (OECD) 301B. For comparison, the biodegradation behaviour of 25# mineral insulating oil was also characterized with the same method. The testing results shown that the biodegradation degree of rapeseed insulating oil, FR3 insulating oil and 25# mineral insulating oil was 95.8%, 98.9% and 38.4% respectively. Following the “new chemical risk assessment guidelines” (HJ/T 154 - 2004), which illustrates the methods used to identify and assess the process safety hazards inherent. The guidelines can draw that the two vegetable insulating oils, i.e. rapeseed insulating oil and FR3 insulating oil are easily biodegradable. Therefore, the both can be classified as environmentally-friendly insulating oil. As expected, 25# mineral insulating oil is hardly biodegradable. The main reason is that 25# mineral insulating oil consists of isoalkanes, cyclanes and a few arenes, which has few unsaturated bonds. Biodegradation of rapeseed insulating oil and FR3 insulating oil also remain some difference. Biodegradation mechanism of vegetable insulating oil was revealed from the perspective of hydrolysis kinetics.

An environmentally-friendly vacuum reduction metallurgical process to recover germanium from coal fly ash

Energy Technology Data Exchange (ETDEWEB)

Zhang, Lingen; Xu, Zhenming, E-mail: zmxu@sjtu.edu.cn

2016-07-15

Highlights: • An environmental friendly vacuum reduction metallurgical process is proposed. • Rare and valuable metal germanium from coal fly ash is recycled. • Residues are not a hazardous material and can be further recycled. • A germanium recovery ratio of 94.64% is obtained in pilot scale experiments. - Abstract: The demand for germanium in the field of semiconductor, electronics, and optical devices is growing rapidly; however, the resources of germanium are scarce worldwide. As a secondary material, coal fly ash could be further recycled to retrieve germanium. Up to now, the conventional processes to recover germanium have two problems as follows: on the one hand, it is difficult to be satisfactory for its economic and environmental effect; on the other hand, the recovery ratio of germanium is not all that could be desired. In this paper, an environmentally-friendly vacuum reduction metallurgical process (VRMP) was proposed to recover germanium from coal fly ash. The results of the laboratory scale experiments indicated that the appropriate parameters were 1173 K and 10 Pa with 10 wt% coke addition for 40 min, and recovery ratio germanium was 93.96%. On the basis of above condition, the pilot scale experiments were utilized to assess the actual effect of VRMP for recovery of germanium with parameter of 1473 K, 1–10 Pa and heating time 40 min, the recovery ratio of germanium reached 94.64%. This process considerably enhances germanium recovery, meanwhile, eliminates much of the water usage and residue secondary pollution compared with other conventional processes.

Microbiological Leaching; an Environmentally Friendly and Cost Effective Method for Extraction of Metals

Directory of Open Access Journals (Sweden)

Ghobeiti-Hasab Mehdi

2018-02-01

Full Text Available Finding a cleaner, environmentally friendly and cost-effective way of metal and mineral extraction has a great importance in today’s world. Using microorganisms in bio-leaching and bio-oxidation process is of great value. From Archaea to bacteria and fungi, microorganisms can play an important role in extraction of metals from mine drainage and un-accessible sources, both in aquatic and terrestrial environments. Optimization of environmental factors such as the temperature, pH and substrate concentration is crucially important to access the optimum extraction of selected metals from an ore or mine drainage. The present paper will review the bio-leaching and bio-oxidation process of minerals with emphasis on the most well-known species of bacterial communities of such ability, through the literature.

DECO FRECASE (drywall eco-friendly from eggshell and cane bagasse) as an innovation of eco-friendly interior construction

Science.gov (United States)

Imron, M. A.; Ahkam, D. N. I.; Hidayat, A. W.

2017-12-01

The number of factories and home industries, both upper and lower middle class certainly adds waste generated, resulting in environmental pollution. The development of buildings is one of the largest contributors to global warming. For that, it takes technological innovations that lead to the criteria of green building. The application of green material is important aspects of environmentally friendly development, the selection of materials on the green material criteria of both roles should be applied continuously in order to realize the environmental sustainability of the material. Utilization Waste eggshell and bagasse which is a community waste, has the potential to become innovative environmentally friendly building materials. The eggshell is composed of 94% calcium carbonate, 1% magnesium carbonate, 1% calcium phosphate, and 4% organic material, especially protein, while the bagasse has a high content of silica (SiO2). In this study, the compounds are used as raw material for making alternative drywall in the form of DECO FRECASE. DECO FRECASE is an innovation of environmentally friendly building materials as an interior wall construction. Through DECO FRECASE, it is expected that building material innovation in Indonesia can be improved and of course environmental problems can be minimized by utilizing it as raw material for building construction.

Helping people build a better world? Barriers to more environmentally friendly energy production in China: the case of Shell

Energy Technology Data Exchange (ETDEWEB)

Buan, Inga Fritzen

2008-03-15

China's rapid industrialization and economic expansion are causing massive environmental damage, with consequences beyond the country's borders, especially due to the use of fossil fuels' effect on climate change. Shell China can contribute to making energy production, if not clean and sustainable, then cleaner and more sustainable by making existing energy production more environmentally friendly; by diversifying and developing alternative energy sources; and by creating precedence influencing others to follow in its footsteps. The first goal of this report is to identify and analyze changes that have happened in the Shell Group since the 1990s when energy companies started their 'greening' processes. These changed happened due to stricter environmental legislation, increased civil society pressure and media scrutiny. Changes on the global and headquarters level in a company do not, however, necessitate similar developments in its national and local level operations. The second goal is thus to analyze to which degree the changes in the Shell Group have had relevance for Shell China and whether barriers in the Chinese context influence its prospects to operate in a more environmentally friendly way. (author). 64 refs

An environmentally-friendly fluorescent method for quantification of lipid contents in yeast

DEFF Research Database (Denmark)

Severo Poli, Jandora; Lützhøft, Hans-Christian Holten; Karakashev, Dimitar Borisov

2014-01-01

lipid and the calibration curve showed linearity (R2 = 0.994) between 0.50 and 25 mg/L. Compared with traditional gravimetric analysis, the developed method is much faster and uses less organic solvents. Lipid contents determined by fluorescence and gravimetry were the same for some strains......This study aimed at developing an efficient, fast and environmentally-friendly method to quantify neutral lipid contents in yeast. After optimising the fluorescence instrument parameters and influence of organic solvent concentrations, a new method to quantify neutral lipids in yeast based......, but for other strains the lipid contents determined by fluorescence were less. This new method will therefore be suitable for fast screening purposes....

Bio-based fillers for environmentally friendly composites

CSIR Research Space (South Africa)

Mokhothu, Thabang H

2017-03-01

Full Text Available The use of bio-based fillers as alternative replacement for synthetic fillers has been dictated by increasing ecological concerns as well as depleting petroleum resources. The other aspect is a growing need for eco-friendly, renewable...

Aluminium alloyed iron-silicide/silicon solar cells: A simple approach for low cost environmental-friendly photovoltaic technology.

Science.gov (United States)

Kumar Dalapati, Goutam; Masudy-Panah, Saeid; Kumar, Avishek; Cheh Tan, Cheng; Ru Tan, Hui; Chi, Dongzhi

2015-12-03

This work demonstrates the fabrication of silicide/silicon based solar cell towards the development of low cost and environmental friendly photovoltaic technology. A heterostructure solar cells using metallic alpha phase (α-phase) aluminum alloyed iron silicide (FeSi(Al)) on n-type silicon is fabricated with an efficiency of 0.8%. The fabricated device has an open circuit voltage and fill-factor of 240 mV and 60%, respectively. Performance of the device was improved by about 7 fold to 5.1% through the interface engineering. The α-phase FeSi(Al)/silicon solar cell devices have promising photovoltaic characteristic with an open circuit voltage, short-circuit current and a fill factor (FF) of 425 mV, 18.5 mA/cm(2), and 64%, respectively. The significant improvement of α-phase FeSi(Al)/n-Si solar cells is due to the formation p(+-)n homojunction through the formation of re-grown crystalline silicon layer (~5-10 nm) at the silicide/silicon interface. Thickness of the regrown silicon layer is crucial for the silicide/silicon based photovoltaic devices. Performance of the α-FeSi(Al)/n-Si solar cells significantly depends on the thickness of α-FeSi(Al) layer and process temperature during the device fabrication. This study will open up new opportunities for the Si based photovoltaic technology using a simple, sustainable, and los cost method.

Spillover of environment-friendly consumer behaviour

DEFF Research Database (Denmark)

Thøgersen, John; Ølander, Carl Folke

2003-01-01

This paper contributes empirical input to current reasoning about consumers' propensity to behave in an environmentally friendly way in different domains. Spe-cifically, we investigate whether environmentally friendly behaviours spread to more and more areas of the consumption pattern in a virtuous...... circle and whether it is a necessary prerequisite for a virtuous circle to emerge and to continue to work that the individual possesses certain general values or ethical norms. The data material is a three-wave panel study with a large random sample of Danish consumers. The data were analysed by means...... of structural equation modelling and other techniques. Cases of transfer of environment-friendly conduct between behavioural categories are found, but only in a few of the possible instances and only of a modest size. The panel analysis also identifies a few negative cross-lagged effects. Such effects may...

Environmentally friendly inhibition of pathogenic bacteria and algae propagation due phthalocyanine agents

International Nuclear Information System (INIS)

Rihova Ambrozova, J.; Bezdekova, E.; Louckova, E.; Nekovarova, J.

2007-01-01

From 2004, in the laboratory of The Institute of Chemical Technology in Prague is being solved the project FT-TA/034 'Environmentally friendly inhibition of pathogenic bacteria and algae propagation in the circulatory cooling systems of nuclear power stations and in other similar technological facilities' to determine effects of phthalocyanine agents. The project bearer is VUOS, Inc. in Rybitvi (Research Institute for Organic Synthesis Inc.), where are the new phthalocyanines synthesized. The aimed goal of the research is environmentally friendly liquidation of bacteria and algae by means of photodynamic generated singlet oxygen through impact of solar radiation in the circulation cooling waters of various technical and technological systems. The principle of the problem outlined is the applying of phthalocyanine agents on samples of pure bacterial, anabaenas and algae cultures to estimate the inhibition effect on the organism exposed. In the course of solution, it is assumed that in such way conducted inhibition of bacteria, anabaenas and algae as well of their proliferation would replace routinely used bactericidal and algicidal preparations, which demand permanent dosing into circulating waters or perhaps from time to time an application of shocking doses. The particular algicidal and bactericidal agents represents in this case in situ emerging singlet oxygen, that is harmless to water biocenoses and whose presence in the water is no reason to ban the outflow of waters treated in such a way into water streams. The goal should be also a direct estimation of the effect those agents on cooling waters samples e. g. from the nuclear power plant systems. The purpose of the tests performance is also elimination of filamentous green algae, emerging in the systems cooling towers. The applied preparations are not toxic and do not burden the living environment, they contain no substances interacting with surface materials of structures in the circulatory cooling circuit

Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

With relation to the coal of the Philippines, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/development, the trend of coal import and domestic distribution, the coal utilization trend, and environmental problems, and analyzed the situation of coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to draw up a master plan for the introduction of the environmentally-friendly coal utilization system. As to the use of environmentally-friendly coal technology which should be adopted to the coal mining industry and commercial/residential sector, cited are the introduction of coal preparation technology and power transmission technology, and the development/spread of briquette as a firewood substituting fuel. In the electric power sector, the problem is the treatment of ash after combustion and the effective use. Relating to the treatment of flue gas, there is no installation at all of desulfurization facilities and denitrification facilities. In the cement industry sector, they wish to return fuel from heavy oil to coal. For it, it is necessary to study dust preventive measures. In the other sectors, coal hasn`t been used very much. An increase in coal demand is not expected also in the future, and big problems concerning coal haven`t occurred. 42 figs., 64 tabs.

Introduction of Microbial Biopolymers in Soil Treatment for Future Environmentally-Friendly and Sustainable Geotechnical Engineering

Directory of Open Access Journals (Sweden)

Ilhan Chang

2016-03-01

Full Text Available Soil treatment and improvement is commonly performed in the field of geotechnical engineering. Methods and materials to achieve this such as soil stabilization and mixing with cementitious binders have been utilized in engineered soil applications since the beginning of human civilization. Demand for environment-friendly and sustainable alternatives is currently rising. Since cement, the most commonly applied and effective soil treatment material, is responsible for heavy greenhouse gas emissions, alternatives such as geosynthetics, chemical polymers, geopolymers, microbial induction, and biopolymers are being actively studied. This study provides an overall review of the recent applications of biopolymers in geotechnical engineering. Biopolymers are microbially induced polymers that are high-tensile, innocuous, and eco-friendly. Soil–biopolymer interactions and related soil strengthening mechanisms are discussed in the context of recent experimental and microscopic studies. In addition, the economic feasibility of biopolymer implementation in the field is analyzed in comparison to ordinary cement, from environmental perspectives. Findings from this study demonstrate that biopolymers have strong potential to replace cement as a soil treatment material within the context of environment-friendly construction and development. Moreover, continuing research is suggested to ensure performance in terms of practical implementation, reliability, and durability of in situ biopolymer applications for geotechnical engineering purposes.

Investigation of Environmental-friendly Technology for a Paint Industry Wastewater Plant in Turkey

Directory of Open Access Journals (Sweden)

Pelin YAPICIOĞLU

2018-02-01

Full Text Available Paint manufacturing process has several unfavorable aspects to the environment in Turkey. One of these impacts is wastewater treatment. Paint wastewater contains huge amounts of toxic chemical substances, bio refractory compounds, pigments and microorganisms. So, advanced treatment requirement is available to dispose of colour, microorganisms and chemical oxygen demand (COD. The high organic content of wastewater causes serious environmental challenges and contamination for the living organisms and the ecosystem in the receiver media unless it is treated adequately. In this context, the treatment process to be implemented should be preferred in such a way as to give the least damage to the environment. In this study, three treatment scenarios that contain electrocoagulation (Scenario-1, Fenton process (Scenario-2 and membrane distillation (Scenario-3 have been created for wastewater treatment facility of a paint industry in Turkey. For three scenarios, environmental impact assessment has been carried out with Fine-Kinney method. It is aimed to choose best environmental technology before investment. The evaluation results revealed that Scenario-2 has the less environmental impacts that total impact value is 556. Scenario-1 has the highest total impact value as 756, relatively. Total impact value related to Scenario-3 is 637. According to the evaluation results, Fenton process is the best environmental-friendly treatment technology for wastewater treatment of a paint industry in Turkey.

Environment-friendly drilling operation technology

Science.gov (United States)

Luo, Huaidong; Jing, Ning; Zhang, Yanna; Huang, Hongjun; Wei, Jun

2017-01-01

Under the circumstance that international safety and environmental standards being more and more stringent, drilling engineering is facing unprecedented challenges, the extensive traditional process flow is no longer accepted, the new safe and environment-friendly process is more suitable to the healthy development of the industry. In 2015, CNPCIC adopted environment-friendly drilling technology for the first time in the Chad region, ensured the safety of well control, at the same time increased the environmental protection measure, reduced the risk of environmental pollution what obtain the ratification from local government. This technology carries out recovery and disposal of crude oil, cuttings and mud without falling on the ground. The final products are used in road and well site construction, which realizes the reutilization of drilling waste, reduces the operating cost, and provides a strong technical support for cost-cutting and performance-increase of drilling engineering under low oil price.

Constraints in the Adoption of Eco Friendly Conservation Practices

Directory of Open Access Journals (Sweden)

L. Murali Krishnan

2016-05-01

Insect pest and diseases management, Lack of awareness of agro environmental problems and farmer’s attitude towards the Eco Friendly Conservation Practices are the major constraints in the adoption of Eco Friendly Conservation Practices.The study suggests educational, extension & training strategies for fostering the adopted of ECO friendly Conservation Practices.

Polystyrene Supported Al(OTf)3: an Environmentally Friendly Heterogeneous Catalyst for Friedel-Crafts Acylation of Aromatic Compounds

International Nuclear Information System (INIS)

Boroujeni, Kaveh Parvanak

2010-01-01

Stable and non-hygroscopic polystyrene supported aluminium triflate (Ps-Al(OTf) 3 ), which is prepared easily from cheap and commercially available compounds was found to be an environmentally friendly heterogeneous catalyst for Friedel-Crafts acylation of arenes using acid chlorides in the absence of solvent under mild reaction conditions. The catalyst can be reused up to five times after simple washing with dichloromethane

A novel, environmentally friendly sodium lauryl ether sulfate-, cocamidopropyl betaine-, cocamide monoethanolamine-containing buffer for MEKC on microfluidic devices.

Science.gov (United States)

Hoeman, Kurt W; Culbertson, Christopher T

2008-12-01

A new buffer has been developed for fast, high-efficiency separations of amino acids by MEKC. This buffer was more environmentally friendly than the most commonly used surfactant-containing buffers for MEKC separations. It used a commercially available dishwashing soap by Seventh Generation (Burlington, VT, USA), which contained three micelle-forming agents. The mixed micelles were composed of sodium lauryl ether sulfate (anionic), cocamidopropyl betaine (zwitterionic), and cocamide monoethanolamine (non-ionic). The optimized buffer contained 5.0% w/w Seventh Generation Free & Clear dishwashing soap, 10 mM sodium borate, and was completely void of organics. The lack of organics and the biodegradability of the surfactant molecules made this buffer more environmentally friendly than typical SDS-containing buffers. This new buffer also had a different selectivity and provided faster separations with higher separation efficiencies than SDS-based buffers. Fast separations of BODIPY FL labeled amino acids yielded peaks with separation efficiencies greater than 100,000 in less than 20 s.

Development and Substantiation of Parameters of Environmentally Friendly Technology for Filling the Vertical Mine Workings with Autoclaved Slag-Concrete

Directory of Open Access Journals (Sweden)

Uglyanitca Andrey

2017-01-01

Full Text Available The environmentally friendly technology for filling the vertical mine workings with autoclaved slag-concrete, prefabricated on the surface of the mine is presented in the article; the optimal parameters of filling technology are proposed. The developed technology for filling the abandoned vertical mine workings allows ensuring the environmental safety of the territories adjacent to the abandoned mine, utilizing slag dumps and providing the possibility of shaft recovery, if necessary, with minimal labor and material costs.

Environmental friendly method for the extraction of coir fibre and isolation of nanofibre.

Science.gov (United States)

Abraham, Eldho; Deepa, B; Pothen, L A; Cintil, J; Thomas, S; John, M J; Anandjiwala, R; Narine, S S

2013-02-15

The objective of this work was to develop an environmental friendly method for the effective utilization of coir fibre by adopting steam pre-treatment. The retting of the coconut bunch makes strong environmental problems which can be avoided by this method. Chemical characterization of the fibre during each processing stages confirmed the increase of cellulose content from raw (40%) to final steam treated fibres (93%). Morphological and dynamic light scattering analyses of the fibres at different processing stages revealed that the isolation of cellulose nano fibres occur in the final step of the process as an aqueous suspension. FT-IR and XRD analysis demonstrated that the treatments lead to the gradual removal of lignin and hemicelluloses from the fibres. The existence of strong lignin-cellulose complex in the raw coir fibre is proved by its enhanced thermal stability. Steam explosion has been proved to be a green method to expand the application areas of coir fibre. Copyright © 2012 Elsevier Ltd. All rights reserved.

Advanced, Environmentally Friendly Hydroelectric Turbines for the Restoration of Fish and Water Quality

International Nuclear Information System (INIS)

Brookshier, P.A.; Cada, G.F.; Flynn, J.V.; Rinehart, B.N.; Sale, M.J.; Sommers, G.L.

1999-01-01

Hydroelectric power contributes about 10 percent of the electrical energy generated in the United States, and nearly 20 percent of the worlds electrical energy. The contribution of hydroelectric generation has declined in recent years, often as a consequence of environmental concerns centering around (1) restriction of upstream and downstream fish passage by the dam, and (2) alteration of water quality and river flows by the impoundment. The Advanced Hydropower Turbine System (AHTS) Program of the U.S. Department of Energy is developing turbine technology which would help to maximize global hydropower resources while minimizing adverse environmental effects. Major technical goals for the Program are (1) the reduction of mortality among turbine-passed fish to 2 percent or less, compared to current levels ranging up to 30 percent or greater; and (2) development of aerating turbines that would ensure that water discharged from reservoirs has a dissolved oxygen concentration of at least 6 mg/L. These advanced, environmentally friendly turbines would be suitable both for new hydropower installations and for retrofitting at existing dams. Several new turbine designs that have been he AHTS program are described

Environmentally-friendly lithium recycling from a spent organic li-ion battery.

Science.gov (United States)

Renault, Stéven; Brandell, Daniel; Edström, Kristina

2014-10-01

A simple and straightforward method using non-polluting solvents and a single thermal treatment step at moderate temperature was investigated as an environmentally-friendly process to recycle lithium from organic electrode materials for secondary lithium batteries. This method, highly dependent on the choice of electrolyte, gives up to 99% of sustained capacity for the recycled materials used in a second life-cycle battery when compared with the original. The best results were obtained using a dimethyl carbonate/lithium bis(trifluoromethane sulfonyl) imide electrolyte that does not decompose in presence of water. The process implies a thermal decomposition step at a moderate temperature of the extracted organic material into lithium carbonate, which is then used as a lithiation agent for the preparation of fresh electrode material without loss of lithium. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

A hybrid discrete choice model to assess the effect of awareness and attitude towards environmentally friendly travel modes

DEFF Research Database (Denmark)

Sottile, Eleonora; Meloni, Italo; Cherchi, Elisabetta

2015-01-01

The need to reduce private vehicle use has led to the development of soft measures aimed at re-educating car users through information processes that raise their awareness regarding the benefits of environmentally friendly modes, encouraging them to voluntarily change their mode choice behaviour......&R) instead of their car, we estimated a hybrid mode choice model....

Environmentally friendly wood preservatives formulated with enzymatic-hydrolyzed okara, copper and/or boron salts

International Nuclear Information System (INIS)

Ahn, Sye Hee; Oh, Sei Chang; Choi, In-gyu; Han, Gyu-seong; Jeong, Han-seob; Kim, Ki-woo; Yoon, Young-ho; Yang, In

2010-01-01

Novel biocides, such as copper azole (CuAz) and ammoniacal copper quaternary (ACQ), are extensively used as substitutes for chromate copper arsenate (CCA) in wood preservation. However, the expense of these biocides has necessitated the development of cost-effective and environmentally friendly wood preservatives. This study was conducted to investigate the effectiveness against decaying fungi of the preservatives formulated with enzymatic-hydrolyzed okara (OK), which is an organic waste produced from the manufacture of tofu, CuCl 2 (CC) and/or Na 2 B 4 O 7 .10H 2 O (B). With the addition of NH 4 OH as a dissociating agent, the addition of OK facilitated the target retention of most of the OK/CC and OK/CC/B preservative formulations in wood blocks. The OK-based wood preservatives (OK-WPs) were stable against hot-water leaching. When compared with control and CC-treated wood blocks, the leached wood blocks treated with OK/CC and OK/CC/B formulations showed excellent decay resistance against both Postia placenta and Gloeophyllum trabeum, especially when OK was hydrolyzed by Celluclast at a loading level of 0.1 ml/g. Scanning electron microscopy (SEM) and SEM-energy dispersive X-ray (SEM-EDX) spectrometry analyses demonstrated that preservative complexes, such as OK-CC and OK-CC-B, existed in the wood blocks treated with OK/CC and OK/CC/B formulations. This study results support the potential application of OK-WPs as environmentally friendly wood preservatives capable of replacing CuAz and ACQ.

Environmentally friendly wood preservatives formulated with enzymatic-hydrolyzed okara, copper and/or boron salts

Energy Technology Data Exchange (ETDEWEB)

Ahn, Sye Hee; Oh, Sei Chang [Department of Forest Resources, Daegu University, Gyeongsan 712-714 (Korea, Republic of); Choi, In-gyu [Department of Forest Sciences, Seoul National University, Seoul 151-921 (Korea, Republic of); Han, Gyu-seong [Department of Wood and Paper Sciences, Chungbuk National University, Cheongju 361-763 (Korea, Republic of); Jeong, Han-seob [Department of Forest Sciences, Seoul National University, Seoul 151-921 (Korea, Republic of); Kim, Ki-woo [National Instrumentation Center for Environmental Management, Seoul National University, Seoul 151-921 (Korea, Republic of); Yoon, Young-ho [KCI Co. Ltd., Seosan, Chungcheongnam-do 356-874 (Korea, Republic of); Yang, In, E-mail: dahadad2000@yahoo.com [Research Institute for Agriculture and Life Sciences, Seoul National University, San 56-1 Sillim-Dong, Kwanak-gu, Seoul 151-921 (Korea, Republic of)

2010-06-15

Novel biocides, such as copper azole (CuAz) and ammoniacal copper quaternary (ACQ), are extensively used as substitutes for chromate copper arsenate (CCA) in wood preservation. However, the expense of these biocides has necessitated the development of cost-effective and environmentally friendly wood preservatives. This study was conducted to investigate the effectiveness against decaying fungi of the preservatives formulated with enzymatic-hydrolyzed okara (OK), which is an organic waste produced from the manufacture of tofu, CuCl{sub 2} (CC) and/or Na{sub 2}B{sub 4}O{sub 7}.10H{sub 2}O (B). With the addition of NH{sub 4}OH as a dissociating agent, the addition of OK facilitated the target retention of most of the OK/CC and OK/CC/B preservative formulations in wood blocks. The OK-based wood preservatives (OK-WPs) were stable against hot-water leaching. When compared with control and CC-treated wood blocks, the leached wood blocks treated with OK/CC and OK/CC/B formulations showed excellent decay resistance against both Postia placenta and Gloeophyllum trabeum, especially when OK was hydrolyzed by Celluclast at a loading level of 0.1 ml/g. Scanning electron microscopy (SEM) and SEM-energy dispersive X-ray (SEM-EDX) spectrometry analyses demonstrated that preservative complexes, such as OK-CC and OK-CC-B, existed in the wood blocks treated with OK/CC and OK/CC/B formulations. This study results support the potential application of OK-WPs as environmentally friendly wood preservatives capable of replacing CuAz and ACQ.

Climate-friendly Default Rules

DEFF Research Database (Denmark)

Sunstein, Cass R.; Reisch, Lucia A.

. The underlying reasons include the power of suggestion; inertia and procrastination; and loss aversion. If well-chosen, climate-friendly defaults are likely to have large effects in reducing the economic and environmental harms associated with various products and activities. In deciding whether to establish...

Characterization of eco-friendly fluorescent nanoparticle-doped tracers for environmental sensing

International Nuclear Information System (INIS)

Tauro, Flavia; Rapiti, Emiliano; Al-Sharab, Jafar F.; Ubertini, Lucio; Grimaldi, Salvatore; Porfiri, Maurizio

2013-01-01

Particle tracers are extensively used in quantitative flow visualization and environmental sensing. In this paper, we provide a thorough characterization of the novel eco-friendly fluorescent particle tracers formulated in Tauro et al. (AIP Adv 3(3): 032108, 2013). The tracers are synthesized from natural beeswax and are functionalized by encapsulating nontoxic fluorophore nanoparticles in the beads’ matrix through an inexpensive thermal procedure. Visibility and durability studies are conducted through a wide array of techniques to investigate the tracers’ surface morphological microfeatures, crystal nature and size, chemical composition, fluorophore incorporation into the beeswax matrix, and fluorescence response under severe settings resembling exposure to natural environments. Our findings demonstrate that fluorescent nanoparticles ranging from 1.51 to 3.73 nm are homogeneously distributed in the superficial layer (12 nm) of the tracers. In addition, fluorescence emissions are observed up to 26 days of continuous exposure of the tracers to high energy radiation. To demonstrate the particles’ use in environmental flow sensing, a set of proof of concept outdoor tests are conducted, in which image analysis tools are utilized for detecting the fluorescent tracers. Experimental results suggest that fluorescent microparticles deployed in high flow-rate flows (2 m/s) and under direct sunlight can be sensed through commercially available cameras (frame rate set to 30 Hz)

Designing advanced materials by environmental friendly plasma electrolytic oxidation

International Nuclear Information System (INIS)

Toader, I.; Valeca, M.; Rusu, O.; Coaca, E.; Marin, A.

2016-01-01

In the CANDU-PHWR nuclear reactors, Zr-2.5Nb coated with a black adherent oxide film of 1 to 2 μm in thickness is currently used for the manufacture of pressure tubes. The black oxide thin film has corrosion protective properties. However, it can be damaged during the regular refueling process, thus causing hydrogen/oxygen ingression. Therefore, an enhanced wear and corrosion resistance coating is needed. Plasma electrolytic oxidation (PEO) is an anodic electrochemical treatment, both cost-effective and environmentally friendly, widely used in the formation of a protective oxide film on the metal surface to enhance wear and corrosion resistance as well as prolonging component lifetime. The state of the art reveals that PEO method is suitable for improving the wear resistance of Zr-2.5Nb alloy. Few studies are performed in this field and thus, it is necessary to conduct a more detailed insight study on the processing parameters for PEO treatment. By understanding the influence of process parameters, such as electrolyte temperature and electrolyte composition, we can find the way to obtain a coating with improved mechanical and corrosion properties on zirconium alloys. (authors)

Environmentally friendly polymer nanocomposites: types, processing and properties

CSIR Research Space (South Africa)

Sinha Ray, S

2013-07-01

Full Text Available In recent years, the development of eco-friendly polymeric materials with balanced properties has become a subject of research attention due to concerns with increasing global-warming, carbon-emission, and limited natural resources. Nano...

Consumer purchase intention towards environmentally friendly vehicles: an empirical investigation in Kuala Lumpur, Malaysia.

Science.gov (United States)

Afroz, Rafia; Masud, Muhammad Mehedi; Akhtar, Rulia; Islam, Md Ashraful; Duasa, Jarita Bt

2015-10-01

This paper examines whether attitudes towards electric vehicles (ATEVs), subjective norms (SNs) and perceived behavioural control (PBC) have significant associations with consumer purchase intention (PI) and the purchase behaviour of environmentally friendly vehicles (EFVs). The results from the survey questionnaires are analysed using confirmatory factor analysis (CFA) and structural equation modelling (SEM). The findings of this paper indicate that ATEV, SN and PBC significantly influence PI. This finding also indicates that environmental consequence and individual preferences do not influence the PI of the respondents. We found that Malaysian car owners are largely unaware of the greenhouse effects on the environment or attach to it little importance, which is reflected in their PI towards EFVs. The outcomes of this study could help policymakers design programmes to influence attitudes, subjective norms, perceived behavioural control and purchase behaviour to prevent further air pollution and reduce CO2 emissions from the transportation sector.

Research program for an environmentally-friendly coal utilization system in the Philippines

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Feasibility studies are conducted on the introduction of an environmentally-friendly coal utilization system into the Filipino electric power industry, cement industry, and domestic fuel sector. The studies cover the current status of economy and energy in that country, supply and demand of coal, environmental protection and Government's policy, study of the above-said system relative to its application to the fields of electric power industry, cement industry, and domestic fuel sector, and a study about the effective utilization of Filipino domestic coal by the use of the system. Imported coal is used in the electric power industry because of its cost and quality. It is learned after research, however, that domestic coal will be able to compete against imported coal when some technologies are resorted to, such as those pertinent to denitrification in the furnace, novel low-NOx burner, coal pulverization, and combustion diagnosis. As for the treatment of flue gas, it is concluded that the simplified wet lime/gypsum process will be suitable. It is inferred that the CWM (coal-water mixture) process technology will be effective for the utilization of domestic low-grade coal. (NEDO)

Research program for an environmentally-friendly coal utilization system in the Philippines

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Feasibility studies are conducted on the introduction of an environmentally-friendly coal utilization system into the Filipino electric power industry, cement industry, and domestic fuel sector. The studies cover the current status of economy and energy in that country, supply and demand of coal, environmental protection and Government's policy, study of the above-said system relative to its application to the fields of electric power industry, cement industry, and domestic fuel sector, and a study about the effective utilization of Filipino domestic coal by the use of the system. Imported coal is used in the electric power industry because of its cost and quality. It is learned after research, however, that domestic coal will be able to compete against imported coal when some technologies are resorted to, such as those pertinent to denitrification in the furnace, novel low-NOx burner, coal pulverization, and combustion diagnosis. As for the treatment of flue gas, it is concluded that the simplified wet lime/gypsum process will be suitable. It is inferred that the CWM (coal-water mixture) process technology will be effective for the utilization of domestic low-grade coal. (NEDO)

The environmentally friendly technology for bio fuel production

International Nuclear Information System (INIS)

Bekers, M.; Danilevics, A.; Guriniece, E.; Gulbis, V.

2003-01-01

Full text: Bio fuel production and use have been discussed this time in EC and in Latvia as alternative energy sources. The national resources allow producing liquid fuels - bio diesel and bi oethanol from rape seeds and grain correspondingly. Liquid bio fuels can be recommended especially for auto transport in big towns to reduce the pollution of air. A system for environmentally friendly production of bio fuel from agricultural raw materials has been developed, which permit a complex utilization of byproducts an wastes for obtaining of valuable food-stuffs and industrial products, providing the agricultural production requirements and supporting with local mineral fertilizers. Such a bio fuel production includes the agricultural and industrial productions in a united biotechnological system. Production objects of system interact: the products, by-products and wastes from one object are used as raw materials, auxiliary materials or heat carriers in other system's objects. This integrated agro-industrial production system would allow the production of feeds and chemical products, along with bio fuels. In this work, a model of a system for a conventional administrative rural region is presented, exemplified with the case of Latvia. The model is developed for three forms of bio fuel production, i.e. ethanol, bio diesel and biogas as local energy source. Bio diesel is produced using ethanol as transesterifying agent of rape-seed oil fatty acids. This bio diesel is a blend of rape-seed oil fatty acid ethyl esters (REE) and consists solely from renewable raw materials. The capacity of distillery of system is 40 million litters per year and bio diesel 35000 ton. Important for agriculture is protein reach press cakes the byproduct from bio diesel production (66000 t/y). This byproduct can be exported as well. Biogas reactors of system can be used for utilization of wastes from town if necessary. Recommended bio system occupates up to 150.000 ha of agriculture lands

Effective and Environmentally Friendly Nickel Coating on the Magnesium Alloy

Directory of Open Access Journals (Sweden)

Ivana Škugor Rončević

2016-12-01

Full Text Available The low density and good mechanical properties make magnesium and its alloys attractive construction materials in the electronics, automotive, and aerospace industry, together with application in medicine due to their biocompatibility. Magnesium AZ91D alloy is an alloy with a high content of aluminum, whose mechanical properties overshadow the low corrosion resistance caused by the composition of the alloy and the existence of two phases: α magnesium matrix and β magnesium aluminum intermetallic compound. To improve the corrosion resistance, it is necessary to find an effective protection method for the alloy surface. Knowing and predicting electrochemical processes is an essential for the design and optimization of protective coatings on magnesium and its alloys. In this work, the formations of nickel protective coatings on the magnesium AZ91D alloy surface by electrodeposition and chemical deposition, are presented. For this purpose, environmentally friendly electrolytes were used. The corrosion resistance of the protected alloy was determined in chloride medium using appropriate electrochemical techniques. Characterization of the surface was performed with highly sophisticated surface-analytical methods.

Eco-friendly dentistry: Need of future. An overview

Directory of Open Access Journals (Sweden)

Savy Arora

2017-01-01

Full Text Available In today's world, it is very necessary to understand the importance of being eco-friendly in every facet of our lives. The color “green” has healing power and denotes renewal, growth, and hope. “Eco-friendly dentistry” attempts to reduce the detrimental impact of dental practices on the environment and promote environmental awareness and sustainability to patients. This paper attempts to cover all possible aspects of making a dental practice eco-friendly, both in a dental perspective as well as a general perspective. While establishing an eco-friendly dental workplace, the dentist needs to assess his choices in planning the infrastructure and purchasing of equipment and dental materials. Eco-friendly dentistry is a newly evolving practice of dentistry, which encompasses a simultaneous devotion to sustainability, prevention, precaution, and a minimally invasive patient-centric, as well as global-centric treatment. There are two main avenues for implementing eco-friendly dentistry: (1 appropriate policy development and implementation and (2 dentists taking responsibility/ownership in the absence of policies and regulations. Although in some cases, it may take a little extra effort or money; dentists throughout the world are doing their best to reduce the environmental impact of the dental practice. Although the commitment of one small dental office cannot save the planet, certainly, the collective efforts of many small offices as well as large dental hospitals/colleges can ensure that dentists, at least, will not be responsible for destroying it. This article discusses various factors that can be incorporated into dental practice that can help make dentistry eco-friendly.

Integrated studies for automobile wastes management in developing countries; in the concept of environmentally friendly mechanic village.

Science.gov (United States)

Nwachukwu, Michael Amamechi; Feng, Huan; Achilike, Kennedy

2011-07-01

More cities in developing countries now consider mechanic village (MV) as superior to the city wide auto-workshop practice following the increasing influx of used or waste automobile from industrialized nations. This is because of the numerous advantages of the mechanic village concept as a capacity building, and in poverty alleviation. Nevertheless, mechanic villages are poorly developed with no waste management plan. They are now identified with severe to excessive heavy metal soil pollution, causing ecological and public health hazards. This paper has a wider explanation of what it takes for a mechanic village to be environmentally friendly based on spectroscopic analysis and physical measurements conducted in three MVs. Heavy metal concentrations (mg kg( -1)) above background levels in the upper 100 cm soil profiles of the Okigwe, the Orji, and the Nekede MVs in the Imo River basin collectively range 748-70,606 for Fe; 99-1,090 for Pb; 186-600 for Mn; 102-1,001 for Cu; 8-23 for Cd; 4-27 for Cr; and 3-10 for Ni. The most abundant metals of environmental concerns are Pb, Mn, and Cu, in the order of Pb > Mn > Cu. Three-phase storm water treatment, emission testing, minimum safe farming distance (350 m), extended producer responsibility for disposal or recycling of used motor oil, phyto-remediation using local plants, groundwater monitoring wells, and continuous education of mechanics are recommended. Exporters of waste automobiles to developing countries and the United Nations may assist developing countries in establishing environmentally friendly MVs.

Novel environmentally friendly synthesis of superparamagnetic magnetite nanoparticles using mechanochemical effect

International Nuclear Information System (INIS)

Iwasaki, Tomohiro; Kosaka, Kazunori; Watano, Satoru; Yanagida, Takeshi; Kawai, Tomoji

2010-01-01

A novel method for synthesizing superparamagnetic magnetite nanoparticles in water system via coprecipitation under an environmentally friendly condition has been developed. In this method, an almost neutral suspension containing ferrous hydroxide and goethite is used as the starting suspension and subjected to a ball-milling treatment. The product was characterized by transmission electron microscopy, X-ray diffraction, energy dispersive X-ray spectroscopy, dynamic light scattering, superconducting quantum interference device magnetometry, and Moessbauer spectroscopy. The mechanochemical effect generated by the ball-milling treatment promoted the reaction between ferrous hydroxide and goethite even at room temperature, resulting in the formation of homogeneous magnetite nanoparticles. Simultaneously, it also contributed to crystallize the formed magnetite nanoparticles while inhibiting the particle growth. This resulted in the formation of ultrafine magnetite nanoparticles of about 10 nm having a single crystal structure. This method could provide ferromagnetic magnetite nanoparticles with superparamagnetism under the moderate condition without neither heating nor any additives such as surfactant and organic solvent.

State of the art of environmentally friendly sample preparation approaches for determination of PBDEs and metabolites in environmental and biological samples: A critical review.

Science.gov (United States)

Berton, Paula; Lana, Nerina B; Ríos, Juan M; García-Reyes, Juan F; Altamirano, Jorgelina C

2016-01-28

Green chemistry principles for developing methodologies have gained attention in analytical chemistry in recent decades. A growing number of analytical techniques have been proposed for determination of organic persistent pollutants in environmental and biological samples. In this light, the current review aims to present state-of-the-art sample preparation approaches based on green analytical principles proposed for the determination of polybrominated diphenyl ethers (PBDEs) and metabolites (OH-PBDEs and MeO-PBDEs) in environmental and biological samples. Approaches to lower the solvent consumption and accelerate the extraction, such as pressurized liquid extraction, microwave-assisted extraction, and ultrasound-assisted extraction, are discussed in this review. Special attention is paid to miniaturized sample preparation methodologies and strategies proposed to reduce organic solvent consumption. Additionally, extraction techniques based on alternative solvents (surfactants, supercritical fluids, or ionic liquids) are also commented in this work, even though these are scarcely used for determination of PBDEs. In addition to liquid-based extraction techniques, solid-based analytical techniques are also addressed. The development of greener, faster and simpler sample preparation approaches has increased in recent years (2003-2013). Among green extraction techniques, those based on the liquid phase predominate over those based on the solid phase (71% vs. 29%, respectively). For solid samples, solvent assisted extraction techniques are preferred for leaching of PBDEs, and liquid phase microextraction techniques are mostly used for liquid samples. Likewise, green characteristics of the instrumental analysis used after the extraction and clean-up steps are briefly discussed. Copyright © 2015 Elsevier B.V. All rights reserved.

A basic plan for the environment-friendly aspects of improved Korean standard nuclear power plant

International Nuclear Information System (INIS)

Jung, Hoon-Seok; Lee, Yong-Koo; Kim, Kwang-Ho

2006-01-01

The Improved Korean Standard Nuclear Power Plant (KSNP+) design has been made possible on the basis of engineering experiences and referring to an in-depth analysis of the design and construction of all the domestic nuclear power plants in operation. The KSNP+ is designed for improved safety, better economics, operability and maintainability by means of advanced technology expecting to demonstrate enhanced performance. The plant also has incorporated several environmentally friendly features through the restoration of excavated areas using an ecological approach, external coloring, figure of turbine generator building and landscaping around nuclear power plant. This is the first time that KOPEC has embarked on inducing environmentally friendly features into the basic plan. This is expected to mitigate the negative perceptions held by the residents in the vicinity of nuclear power plants and will contribute to a new and improved image of nuclear power plants. (authors)

Developing Pro-Environmental Behaviour: Ecotourism Fieldtrip and Experiences

Science.gov (United States)

Ting, Ding Hooi; Cheng, Charles Fang Chin

2017-01-01

Purpose: This study aims to assess the effectiveness of a student participatory approach and assessment to achieve an environmentally friendly behaviour and change strategy. Design/methodology/approach Three time-phase studies employed a participatory and experiential case in the form of ecotourism experiential learning and assessment using a…

Green Synthesis of Nanomaterials: Environmental Aspects

Science.gov (United States)

There is always a search for reliable and environmentally friendly processes to manufacture metal and metal oxide nanoparticles minimizing or even eliminating the use of hazardous chemicals. The only way to develop these “green” processes is to adapt benign synthesis approaches t...

Africa takes a more male-friendly approach to family planning.

Science.gov (United States)

Omuodo, D O

1996-12-01

It has been demonstrated that men are more likely to support family planning (FP) and to use a method themselves if services and educational programs are targeted to them. Because men fear that contraception reduces their control over their wives' sexuality, male-friendly approaches can enhance gender equality in reproductive health decisions. In Togo, the media is being used to encourage positive attitudes towards FP in specific male groups. In Ghana, FP services targeted to men have resulted in increased male involvement. In Swaziland, male audiences are targeted with FP education. In Sierra Leone, men have met in groups to learn about how to prevent sexually transmitted diseases and about the benefits of FP, and in Kenya, three male-only clinics exist to provide FP services to men.

Bringing Baby-Friendly to the Indian Health Service: A Systemwide Approach to Implementation.

Science.gov (United States)

Karol, Susan; Tah, Tina; Kenon, Clifton; Meyer, Jenna; Yazzie, Jeannette; Stephens, Celissa; Merewood, Anne

2016-05-01

The Baby-Friendly Hospital Initiative (BFHI) increases exclusive breastfeeding. Breastfeeding protects against obesity and diabetes, conditions to which American Indians and Alaska Natives are particularly prone. As part of the First Lady'sLet's Move! in Indian Countryinitiative, the US Department of Health and Human Services' Indian Health Service (IHS) began implementing the BFHI in 2011. The IHS administers 13 US birthing hospitals. There are 5 tribally administered hospitals in the lower 48 states that receive IHS funding, and the IHS encouraged them to seek Baby-Friendly designation also. In the 13 federally administered hospitals, the IHS implemented a Baby-Friendly infant feeding policy, extensive clinician training, and Baby-Friendly compatible medical records. All hospitals also became compliant with the World Health Organization's International Code of Marketing of Breast-Milk Substitutes. Strategies and solutions were shared systemwide via webinars and conference calls. Quality improvement methods, technical assistance, and site visits assisted with the implementation process. Between 2011 and December 2014, 100% (13 of 13) of IHS federally administered hospitals gained Baby-Friendly designation. The first Baby-Friendly hospitals in Arizona, New Mexico, North Dakota, Oklahoma, and South Dakota were all IHS sites; 6% of all US Baby-Friendly hospitals are currently IHS hospitals. One tribal site has also been Baby-Friendly designated and 3 of the 5 remaining tribally administered hospitals in the lower 48 states are pursuing Baby-Friendly status. Baby-Friendly Hospital Initiative implementation systemwide is possible in a US government agency serving a high-risk, underprivileged population. Other systems looking to implement the BFHI can learn from the IHS model. © International Lactation Consultant Association 2015.

Environmentally Friendly Coating Technology for Autonomous Corrosion Control

Science.gov (United States)

Calle, Luz M.; Li, Wenyan; Buhrow, Jerry W.; Johnsey, Marissa N.; Jolley, Scott T.; Pearman, Benjamin P.; Zhang, Xuejun; Fitzpatrick, Lilliana; Gillis, Mathew; Blanton, Michael;

Association and Diffusion of Li(+) in Carboxymethylcellulose Solutions for Environmentally Friendly Li-ion Batteries.

Science.gov (United States)

Casalegno, Mosè; Castiglione, Franca; Passarello, Marco; Mele, Andrea; Passerini, Stefano; Raos, Guido

2016-07-21

Carboxymethylcellulose (CMC) has been proposed as a polymeric binder for electrodes in environmentally friendly Li-ion batteries. Its physical properties and interaction with Li(+) ions in water are interesting not only from the point of view of electrode preparation-processability in water is one of the main reasons for its environmental friendliness-but also for its possible application in aqueous Li-ion batteries. We combine molecular dynamics simulations and variable-time pulsed field gradient spin-echo (PFGSE) NMR spectroscopy to investigate Li(+) transport in CMC-based solutions. Both the simulations and experimental results show that, at concentrations at which Li-CMC has a gel-like consistency, the Li(+) diffusion coefficient is still very close to that in water. These Li(+) ions interact preferentially with the carboxylate groups of CMC, giving rise to a rich variety of coordination patterns. However, the diffusion of Li(+) in these systems is essentially unrestricted, with a fast, nanosecond-scale exchange of the ions between CMC and the aqueous environment. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

An environment-friendly microemulsion approach to α-FeOOH nanorods at room temperature

International Nuclear Information System (INIS)

Geng Fengxia; Zhao Zhigang; Cong Hongtao; Geng Jianxin; Cheng Huiming

2006-01-01

α-FeOOH nanorods have been prepared at room temperature by an environment-friendly microemulsion approach. X-ray diffraction and transmission electron microscopy revealed that the single-crystalline orthorhombic α-FeOOH nanorods are 8.2 ± 1.5 nm in diameter and 106 ± 16 nm in length. Furthermore, the mechanism for the formation of α-FeOOH nanorods is preliminarily presented. This method may be widely used for reference to fabricate other inorganic one-dimensional nanostructured materials and easily realized in industrial-scale synthesis

Hydrogel-coated feed spacers in two-phase flow cleaning in spiral wound membrane elements: A novel platform for eco-friendly biofouling mitigation

NARCIS (Netherlands)

Wibisono, Y.; Yandi, Wetra; Golabi, Mohsen; Nugraha, Roni; Cornelissen, Emile R.; Kemperman, Antonius J.B.; Ederth, Thomas; Nijmeijer, Dorothea C.

2015-01-01

Biofouling is still a major challenge in the application of nanofiltration and reverse osmosis membranes. Here we present a platform approach for environmentally friendly biofouling control using a combination of a hydrogel-coated feed spacer and two-phase flow cleaning. Neutral

An environmentally friendly procedure to obtain flavonoids from Brazilian citrus waste

Energy Technology Data Exchange (ETDEWEB)

Bellete, Barbara S.; Ramin, Luize Z.; Porto, Deyvid; Ribeiro, Alany I.; Forim, Moacir R.; Zuin, Vânia G.; Fernandes, João B.; Silva, Maria Fátima G.F., E-mail: barbarabellete@gmail.com [Departamento de Química, Universidade Federal de São Carlos, SP (Brazil)

2018-05-01

Currently, most food waste is used as animal feed and this process does not take advantage of the available chemical composition. A Brazilian example is the citrus fruit processing wastes (CFPW), which have begun to draw attention due to their biological importance. In order to access the main compounds of this matrix, an efficient and environmentally friendly procedure was tested. From this extract, flavonoids as naringenin, hesperitin, chrysoeriol, sinensetin, 3,5,6,7,3',4'-hexamethoxyflavone, nobiletin, 5-methoxysalvigenin, 3,5,6,7,8,3',4'-heptamethoxyflavone, 3,5,6,7,4'-pentamethoxyflavone and isosakuranetin were identified by high performance liquid chromatography (HPLC-UV), liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography-nuclear magnetic resonance (LC-NMR). This study describes the potential use of citrus waste as a source of biologically active compounds. The extraction method proposed for this work was not expensive and the flavonoids were obtained in large amounts, thus, this extraction method is being developed using pilot plant scale-up techniques and will soon be available to the industry at a low cost. (author)

An environmentally friendly procedure to obtain flavonoids from Brazilian citrus waste

International Nuclear Information System (INIS)

Bellete, Barbara S.; Ramin, Luize Z.; Porto, Deyvid; Ribeiro, Alany I.; Forim, Moacir R.; Zuin, Vânia G.; Fernandes, João B.; Silva, Maria Fátima G.F.

2018-01-01

Currently, most food waste is used as animal feed and this process does not take advantage of the available chemical composition. A Brazilian example is the citrus fruit processing wastes (CFPW), which have begun to draw attention due to their biological importance. In order to access the main compounds of this matrix, an efficient and environmentally friendly procedure was tested. From this extract, flavonoids as naringenin, hesperitin, chrysoeriol, sinensetin, 3,5,6,7,3',4'-hexamethoxyflavone, nobiletin, 5-methoxysalvigenin, 3,5,6,7,8,3',4'-heptamethoxyflavone, 3,5,6,7,4'-pentamethoxyflavone and isosakuranetin were identified by high performance liquid chromatography (HPLC-UV), liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography-nuclear magnetic resonance (LC-NMR). This study describes the potential use of citrus waste as a source of biologically active compounds. The extraction method proposed for this work was not expensive and the flavonoids were obtained in large amounts, thus, this extraction method is being developed using pilot plant scale-up techniques and will soon be available to the industry at a low cost. (author)

An Experimental Approach to the Joint Effects of Relations with Partner, Friends and Parents on Happiness

Science.gov (United States)

Theuns, P.; Verresen, N.; Mairesse, O.; Goossens, R.; Michiels, L.; Peeters, E.; Wastiau, M.

2010-01-01

Personal relations constitute an important life domain and satisfaction therein affects happiness in people. In an experimental approach with a 3x3x3 vignettes study in which 103 first year psychology students participated, the contribution of the quality of relationships with parents, friends, and a partner are studied. It is found that the…

A System Approach to Environmental Education

Directory of Open Access Journals (Sweden)

Z. Kostova

2007-09-01

Full Text Available A system approach to environmental education (EE is developed. By making use of it the educators will be able to introduce successfully ecological principles and global environmental problems in the educational system for the development of environmental culture, consciousness and behavior. It embraces a long period of thinking, designing, experimenting and rethinking in the light of the new ideas, concerning humanity-nature relationships. The core of the system approach is represented by environmental consciousness, which is the driving force of environmentally responsible behavior. The system approach is concerned with constructing an innovative model of EE, which consists of three elements: didactical, conceptual and technological and six integrating concepts, uniting the studies of the different school subjects under the global movement for sustainable development. EE is regarded to be an essential part of the education for sustainable development (ESD.

Environmentally friendly chemoselective oxidation of primary aliphatic amines by using a biomimetic electrocatalytic system.

Science.gov (United States)

Largeron, Martine; Chiaroni, Angèle; Fleury, Maurice-Bernard

2008-01-01

Environmentally friendly oxidation of primary aliphatic amines to imines has been successfully achieved, under metal-free conditions, by the use of diverse electrogenerated o-azaquinone mediators. High catalytic performance, together with high chemoselectivity, were observed with electron-poor o-azaquinone catalysts generated from 2-aminoresorcinol derivatives. Similar to copper amine oxidase enzymes, these mediators exhibited lower reactivity toward alpha-branched primary amines and no reactivity toward secondary amines. In the case of 3,4-aminophenol derivatives lacking a 2-hydroxy group, the generated o-azaquinone species failed to catalyze the oxidation of the amine to the corresponding imine. Further mechanistic considerations allowed a rationalization of the crucial role of the 2-hydroxy group in converting a catalytically inert species into a highly effective biomimetic catalyst.

Rehabilitation of Problem Soils Through Environmental Friendly Technologies-I: Effect of Sabins and Farmyard Manure

International Nuclear Information System (INIS)

Baig, Mirza B.; Ziaeldin, Mohammad S.; Mahler, Robert L.

2004-01-01

Environmental problem due to land degradation in the developing countries have been a matter of great cocern for the decades. The rehabilitation of problem land has been through many chemical means and engineering approaches, that have resulted in enhancing the gravity and the magnitude of problems. The present studies were undertaken to examine the role of environmental friendly practices to address the salinity issue. the effect of organic manuring (green manure and farmyard manure) or rice was investigated in a field study on a saline-sodic soil of the Saline Agriculture Research Station, Sadhuke, Pakistan. Sesbania was grown as a green manuring crop for two months and then incorporated into soil. farmyard manure (FYM) was applied at the rate of 0, 5, 10 and 20/ha before the sowing of Sesbania. Rice,Cv. Basmati 385 was used as the indicator/test crop. Results revealed that both paddy and straw yields were significantly improved by the application of sesbina and FYM. Green manure with sesbina improved the paddy and straw yields by 15.4% and 14.5% respectively. Productive tillers were also increased by the application of FYM but difference were not significant between 10 and 20ha/ of FYM application. FYM application also improved the paddy and straw yield significantly. The incrase in paddy yield due to application of 5, 10 and 20/ha of FYM were 6.8%, 24.4% and 37.6% over control, respectively. Nitrogen and phosphprus utilizationn by rice were also significantly improved with the application of green manure. Nitrogen uptake by rice was incresed by 17.8% and that of phosphorus by 21.9% with the green manuring. Nitrogen uptake was significantlty increased by the application of different rates of FYM. Also phosphorus uptake was increased significantly with the application of FYM. (author)

The observational approach in environmental restoration

International Nuclear Information System (INIS)

Smyth, J.D.; Quinn, R.D.

1991-07-01

The US Department of Energy (DOE) has committed to completing environmental restoration of its facilities within the next 28 years (DOE 1990b). In order to achieve this, DOE must ensure that its restoration activities are both effective and efficient. A key aspect of fulfilling this commitment is the recognition and management of uncertainty that is inherent in waste-site clean-up actions. The DOE Office of Environmental Restoration (DOE-ER) requested Pacific Northwest Laboratory (PNL) to investigate the applicability and implementation of what is known as the ''observational approach'' to better address these needs. PNL's initial investigation resulted in the positive conclusion that the observational approach had potential benefit to DOE during environmental restoration. In a follow-on effort, PNL supported by CH2M HILL, has been providing guidance to DOE field-offices on observational approach fundamentals, implementation, and application to waste-site remediation. This paper outlines the fundamentals of the observational approach and discusses the progress in integrating the observational approach in DOE's environmental restoration efforts. 9 refs., 2 figs

Industrial Implementation of Environmentally Friendly Nanometal Electroplating Process for Chromium and Copper Beryllium Replacement using Low Cost Pulse Current Power Supplies

Science.gov (United States)

2014-09-10

FINAL REPORT Industrial Implementation of Environmentally Friendly Nanometal Electroplating Process for Chromium and Copper Beryllium...35 3.2 Phase II – Development/Verification that Nanotechnology Based Electroplating Process to Replace EHC/Cu-Be Processes are Compatible With...36 3.3 Phase III – Development of 200kW Power Supply and Compatible Nanostructured Electroplating Processed for Commercialization

Achieving Child Friendly Justice through Child Friendly Methods: Let’s Start with the Right to Information

Directory of Open Access Journals (Sweden)

Helen Stalford

2017-09-01

Full Text Available Making the justice process ‘child friendly’ is a key priority for the children’s rights community. An abundance of commentary has been produced by the UN Committee on the Rights of the Child to highlight how justice proceedings can be made more accessible for children and, in 2010, the Council of Europe issued its comprehensive ‘Guidelines on Child Friendly Justice’. Despite these efforts, children remain ill-informed, not just about the nature of justice proceedings in which they may be implicated, but about the very existence and scope of their rights and how to enforce them. Despite unequivocal acknowledgement that the availability and accessibility of information is the crucial starting point in a children’s rights-based approach to dispensing justice, there has been surprisingly little attempt to scrutinise the availability, quality and accessibility of information about laws and policies affecting children. This article takes a closer look at what, exactly, ‘child friendly’ information means in practice. In doing so, we argue that attempts to develop child friendly information have yet to progress beyond adult-driven, largely tokenistic and superficial re-branding exercises. As such, efforts to develop child friendly resources are often of limited value in empowering young people to develop their legal literacy and realise their rights in practice. We reflect on our attempt to develop an explicitly children’s rights-based approach to the development of child friendly resources with a view to enhancing their purchase. This took place in the context of a pilot project, commissioned by the Council of Europe in June 2014, to create a child friendly version of their Child Friendly Justice Guidelines.

Development and Pilot Testing of a Bilingual Environmental Health Assessment Tool to Promote Asthma-friendly Childcares.

Science.gov (United States)

Evans-Agnew, Robin A; Postma, Julie; Camacho, Ariana Ochoa; Hershberg, Rachel M; Trujilio, Elsa; Tinajera, Maria

2018-01-01

Childhood marks the highest risk for allergic sensitization to asthma triggers. Hispanic/Latino children are at higher risk for hospitalization for asthma than non-Hispanic White children. Childcare providers lack knowledge about reducing asthma triggers. The purpose of this paper is to describe a community-based participatory research (CBPR) initiative aimed at developing and pilot testing a bilingual walk-through assessment tool for asthma-friendly childcare environments. Ten Latina mothers of children with asthma living in the Pacific Northwest collaborated with research partners to develop and pilot test a Childcare Environmental Health (CEH) assessment walk-through survey.Results and Lessons Learned: The women innovated the survey with photography and structural examinations of stress and provision of basic needs. The survey tool identified environmental threats to asthma in all three childcares surveyed. Parents are well-positioned to build trust with childcare providers, assess asthma triggers, and recommend practical mitigation strategies.

New ADAC centre cools and heats environmental-friendly. Concrete core tempering; Neue ADAC-Zentrale kuehlt und heizt umweltvertraeglich. Betonkerntemperierung

Energy Technology Data Exchange (ETDEWEB)

Anon,

2010-12-15

At present, the new centre of the General German Automobile Association (ADAC) arises in Munich's suburb Sendling/Westpark. In summer 2011, nearly 2,400 coworkers of ADAC so far distributed over six locations in Munich shall work together in the new office building. So that they feel well in this new building, Rehau AG (Rehau, Federal Republic of Germany) supplies an environmental-friendly heating and cooling of the building by means of concrete core tempering.

Note: Fabrication of a fast-response and user-friendly environmental chamber for atomic force microscopes

Energy Technology Data Exchange (ETDEWEB)

Ji, Yanfeng; Hui, Fei; Shi, Yuanyuan; Han, Tingting; Song, Xiaoxue; Pan, Chengbin; Lanza, Mario, E-mail: mlanza@suda.edu.cn [Institute of Functional Nano & Soft Materials, Soochow University, Collaborative Innovation Center of Suzhou Nano Science & Technology, 199 Ren-Ai Road, Suzhou 215123 (China)

2015-10-15

The atomic force microscope is one of the most widespread tools in science, but many suppliers do not provide a competitive solution to make experiments in controlled atmospheres. Here, we provide a solution to this problem by fabricating a fast-response and user-friendly environmental chamber. We corroborate the correct functioning of the chamber by studying the formation of local anodic oxidation on a silicon sample (biased under opposite polarities), an effect that can be suppressed by measuring in a dry nitrogen atmosphere. The usefulness of this chamber goes beyond the example here presented, and it could be used in many other fields of science, including physics, mechanics, microelectronics, nanotechnology, medicine, and biology.

Analisa Perbedaan Eco-friendly Attitude Dan Eco-friendly Intention Antara Turis Lokal Dan Turis Asing Terhadap Green

OpenAIRE

Jokom, Regina; Kristanti, Monika

2014-01-01

The increasing concern for environmental degradation caused many people to pay more attention to the green practice in the industry including hotel. Majority of hotel chains have adopted environmental programs and labeled as green hotel. This study examines the significant differences between local tourist and foreign tourist regarding ecofriendly attitude and eco-friendly intention toward green hotel. Questionnaires were distributed to 120 localtourists and 120 foreign tourists In Juanda...

Natural cork agglomerate employed as an environmentally friendly solution for quiet sandwich composites.

Science.gov (United States)

Sargianis, James; Kim, Hyung-ick; Suhr, Jonghwan

2012-01-01

Carbon fiber-synthetic foam core sandwich composites are widely used for many structural applications due to their superior mechanical performance and low weight. Unfortunately these structures typically have very poor acoustic performance. There is increasingly growing demand in mitigating this noise issue in sandwich composite structures. This study shows that marrying carbon fiber composites with natural cork in a sandwich structure provides a synergistic effect yielding a noise-free sandwich composite structure without the sacrifice of mechanical performance or weight. Moreover the cork-core sandwich composites boast a 250% improvement in damping performance, providing increased durability and lifetime operation. Additionally as the world seeks environmentally friendly materials, the harvesting of cork is a natural, renewable process which reduces subsequent carbon footprints. Such a transition from synthetic foam cores to natural cork cores could provide unprecedented improvements in acoustic and vibrational performance in applications such as aircraft cabins or wind turbine blades.

Analisa Eco-friendly Attitudes Dan Eco-friendly Behavior Terhadap Eco-friendly Intention Green Hotel Di Indonesia

OpenAIRE

Silvia, Lanny; Rudijanto, Diana Gabriela; Kristanti, Monika

2017-01-01

Kesadaran masyarakat akan lingkungan yang semakin meningkat membuat masyarakat gencar mencari hotel yang ramah lingkungan dibandingkan dengan hotel konvensional. Penelitian ini bertujuan untuk mengetahui perbedaan eco-friendly attitude, eco- friendly behavior, dan eco-friendly intention konsumen generasi x dan generasi y terhadap green hotel di Indonesia dan apakah eco-friendly attitudes dan eco-friendly behavior berpengaruh signifikan terhadap eco-friendly intention. Total responden dalam pe...

Hydrogel-coated feed spacers in two-phase flow cleaning in spiral wound membrane elements: A novel platform for eco-friendly biofouling mitigation

NARCIS (Netherlands)

Wibisono, Yusuf; Yandi, Wetra; Golabi, Mohsen; Nugraha, Roni; Cornelissen, Emile; Kemperman, A.J.B.; Ederth, Thomas; Nijmeijer, Kitty

2015-01-01

ng is still a major challenge in the application of nanofiltration and reverse osmosis membranes. Here we present a platform approach for environmentally friendly biofouling control using a combination of a Hydrogel-coated feed spacer and two-phase flow cleaning. Neutral (polyHEMA-co-PEG10MA),

Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in the Philippines; Kankyo chowagata sekitan riyo system kanosei chosa. Philippines ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Grasping the present situation of coal utilization technology in the Philippines, the paper proposed a feasibility study of introduction of the environmentally friendly type coal utilization system which seems to be needed in the future. (1) Introduction of the environmentally friendly type coal utilization system in the electric power generation sector: there are only four full-scale running coal thermal power plants in the Philippines. In the future, several coal thermal plants are planned to be constructed by 2005, but for the new installation, it is desirable to adopt fluidized bed boilers with wide application to coal kinds. In case of 0.3-1.0 million MW class plants, it is planned to adopt high grade import coals, and it will be natural to fire pulverized coal. For the processing of flue gas, it is a must to install desulfurization facilities and smoke/soot removal devices. (2) Utilization/development of domestic low grade coals: at the mine-mouth generating plant, it is necessary to investigate the economically minable amount of coal, confirm productivity, survey coal quality, etc., and select boiler. As to coal briquetting technology, it is necessary to examine coal quality for tests and make a thorough study of what technology is most suitable. 50 figs., 78 tabs.

Environmentally Friendly Consumer

DEFF Research Database (Denmark)

Reijonen, Satu

2011-01-01

on the green consumer: cultural determinism, psycho-socio-demographic determinism and calculative determinism. An explanation of the green consumer in these terms, however, loses sight of the emergence and processuality of consumer behaviour. Process oriented constructionism, by contrast, is useful to recover...... these important aspects. This paper suggests a research agenda focused on socio-material processes and situated actions that lead to the emergence and stabilization of a particular type of consumer behaviour.......Several attempts have been made by academics in the past to explain the so-called ‘environmentally conscious’ consumer. These explanations share an important feature, namely determinism. This paper identifies three different sources of determinism that are distinguished in recent literature...

Practice-Based Interdisciplinary Approach and Environmental Research

Directory of Open Access Journals (Sweden)

Ranjan Kumar Datta

2017-03-01

Full Text Available Interdisciplinary researchers and educators, as community members, creators of knowledge, and environmental activists and practitioners, have a responsibility to build a bridge between community practice, academic scholarship, and professional contributions aimed at establishing environmental sustainability. In this paper, I focus on an undervalued area of environmental politics, practices, and often unarticulated assumptions which underlie human–environmental relations. This article challenges interdisciplinary studies that are not connected with practice by reconfiguring the meaning of a community-based, interdisciplinary approach. Drawing from works by Foucault, Latour, and Haraway, this paper first shows how to reconfigure the meaning of an interdisciplinary approach. Second, using Bourdieu and Brightman’s ethnographic studies as a framework, the paper situates practice as central to our efforts to deconstruct and replace current interdisciplinary initiatives with a practice-based approach. Through a practice-based interdisciplinary approach (PIA, environmental educators and researchers gain an awareness of and learn to make an investment in sustainable communities. As teams of environmental researchers practising in the local community, they are meaningfully involved with the community, with each other, and with the environment.

Moral intensity and climate-friendly food choices.

Science.gov (United States)

Mäkiniemi, Jaana-Piia; Vainio, Annukka

2013-07-01

By changing individual food consumption patterns, it might be possible to reduce greenhouse gas emissions associated with climate change. The aim of the current study was to examine how perceptions of the moral intensity of climate change are related to climate friendly-food choices. The participants were 350 Finnish university students in the social and behavioral sciences who completed a questionnaire during class. The results indicated that moral perceptions mainly affected the moral evaluation and intentions to make climate-friendly food choices. We suggest that the results can be used to promote climate-friendly food choices, for example, by increasing the recognition of climate change as a moral imperative and by combining environmental motives with other relevant food choice motives. Copyright © 2013 Elsevier Ltd. All rights reserved.

Candidate eco-friendly gas mixtures for MPGDs

Science.gov (United States)

Benussi, L.; Bianco, S.; Saviano, G.; Muhammad, S.; Piccolo, D.; Ferrini, M.; Parvis, M.; Grassini, S.; Colafranceschi, S.; Kjølbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.

2018-02-01

Modern gas detectors for detection of particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This review studies properties of potential eco-friendly gas candidate replacements.

Friend Effects and Racial Disparities in Academic Achievement

Directory of Open Access Journals (Sweden)

Jennifer Flashman

2014-07-01

Full Text Available Racial disparities in achievement are a persistent fact of the US educational system. An often cited but rarely directly studied explanation for these disparities is that adolescents from different racial and ethnic backgrounds are exposed to different peers and have different friends. In this article I identify the impact of friends on racial and ethnic achievement disparities. Using data from Add Health and an instrumental variable approach, I show that the achievement characteristics of youths’ friends drive friend effects; adolescents with friends with higher grades are more likely to increase their grades compared to those with lower-achieving friends. Although these effects do not differ across race/ethnicity, given differences in friendship patterns, if black and Latino adolescents had friends with the achievement characteristics of white students, the GPA gap would be 17 to 19 percent smaller. Although modest, this effect represents an important and often overlooked source of difference among black and Latino youth.

NASA's Beachside Corrosion Test Site and Current Environmentally Friendly Corrosion Control Initiatives

Science.gov (United States)

Russell, Richard W.; Calle, Luz Marina; Johnston, Frederick; Montgomery, Eliza L.; Curran, Jerome P.; Kolody, Mark R.

2013-01-01

NASA began corrosion studies at the Kennedy Space Center (KSC) in 1966 during the Gemini/Apollo Programs with the evaluation of long-term corrosion protective coatings for carbon steel. KSC's Beachside Corrosion Test Site (BCTS), which has been documented by the American Society of Materials (ASM) as one of the most corrosive, naturally occurring, environments in the world, was established at that time. With the introduction of the Space Shuttle in 1981, the already highly corrosive conditions at the launch pad were rendered even more severe by the acid ic exhaust from the solid rocket boosters. In the years that followed, numerous studies have identified materials, coatings, and maintenance procedures for launch hardware and equipment exposed to the highly corrosive environment at the launch pad. This paper presents a historical overview of over 45 years of corrosion and coating evaluation studies and a description of the BCTS's current capabilities. Additionally, current research and testing programs involving chromium free coatings, environmentally friendly corrosion preventative compounds, and alternates to nitric acid passivation will be discussed.

Phytofilter - environmental friendly solution for purification of surface plate from urbanized territories

Science.gov (United States)

Ruchkinova, O.; Shchuckin, I.

2017-06-01

Its proved, that phytofilters are environmental friendly solution of problem of purification of surface plate from urbanized territories. Phytofilters answer the nowadays purposes to systems of purification of land drainage. The main problem of it is restrictions, connecter with its use in the conditions of cold temperature. Manufactured a technology and mechanism, which provide a whole-year purification of surface plate and its storage. Experimentally stated optimal makeup of filtering load: peat, zeolite and sand in per cent of volume, which provides defined hydraulic characteristics. Stated sorbate and ion-selective volume of complex filtering load of ordered composition in dynamic conditions. Estimated dependences of exit concentrations of oil products and heavy metals on temperature by filtering through complex filtering load of ordered composition. Defined effectiveness of purification at phytofiltering installation. Fixed an influence of embryophytes on process of phytogeneration and capacity of filtering load. Recommended swamp iris, mace reed and reed grass. Manufactured phytofilter calculation methodology. Calculated economic effect from use of phytofiltration technology in comparison with traditional block-modular installations.

Fungal treatment: a prospective process for eco-friendly bioremediation of wastewater sludge

International Nuclear Information System (INIS)

Molla, A. H.; Fakhru'l-Razi, A.

2009-01-01

None of the conventional techniques is safe and environmental friendly for wastewaters/sludge disposal. A sustainable, safe and environmental friendly biological technique is a great apprehension to the relevant scientists. Since the fungal treatment was exercised to evaluate its potentially for sustainable bioseparation and bioremediation of wastewater. Bioseparation and bioremediation of wastewater sludge by fungal inoculation implied the decreasing of bio solids, total suspended solids (TSS), turbidity, chemical oxygen demand (COD) and specific resistance to filtration (SRF) of wastewater. (Author)

New user-friendly approach to obtain an Eisenberg plot and its use as a practical tool in protein sequence analysis.

Science.gov (United States)

Keller, Rob C A

2011-01-01

The Eisenberg plot or hydrophobic moment plot methodology is one of the most frequently used methods of bioinformatics. Bioinformatics is more and more recognized as a helpful tool in Life Sciences in general, and recent developments in approaches recognizing lipid binding regions in proteins are promising in this respect. In this study a bioinformatics approach specialized in identifying lipid binding helical regions in proteins was used to obtain an Eisenberg plot. The validity of the Heliquest generated hydrophobic moment plot was checked and exemplified. This study indicates that the Eisenberg plot methodology can be transferred to another hydrophobicity scale and renders a user-friendly approach which can be utilized in routine checks in protein-lipid interaction and in protein and peptide lipid binding characterization studies. A combined approach seems to be advantageous and results in a powerful tool in the search of helical lipid-binding regions in proteins and peptides. The strength and limitations of the Eisenberg plot approach itself are discussed as well. The presented approach not only leads to a better understanding of the nature of the protein-lipid interactions but also provides a user-friendly tool for the search of lipid-binding regions in proteins and peptides.

The Effects of Mothers' Educational Levels on University Students' Environmental Protection Commitments and Environmental Behaviors

Science.gov (United States)

Saraçli, Sinan; Yilmaz, Veysel; Arslan, Talha

2014-01-01

Problem Statement: The damage caused by recent environmental problems has led to increased environmental concerns and the development of environment-friendly consumption behaviours in almost every society. Environment-friendly consumption involves the consideration of environmental benefits by minimizing any damage done to the environment at all…

New insights into liquid chromatography for more eco-friendly analysis of pharmaceuticals.

Science.gov (United States)

Shaaban, Heba

2016-10-01

Greening the analytical methods used for analysis of pharmaceuticals has been receiving great interest aimed at eliminating or minimizing the amount of organic solvents consumed daily worldwide without loss in chromatographic performance. Traditional analytical LC techniques employed in pharmaceutical analysis consume tremendous amounts of hazardous solvents and consequently generate large amounts of waste. The monetary and ecological impact of using large amounts of solvents and waste disposal motivated the analytical community to search for alternatives to replace polluting analytical methodologies with clean ones. In this context, implementing the principles of green analytical chemistry (GAC) in analytical laboratories is highly desired. This review gives a comprehensive overview on different green LC pathways for implementing GAC principles in analytical laboratories and focuses on evaluating the greenness of LC analytical procedures. This review presents green LC approaches for eco-friendly analysis of pharmaceuticals in industrial, biological, and environmental matrices. Graphical Abstract Green pathways of liquid chromatography for more eco-friendly analysis of pharmaceuticals.

An Integrated Computer-Aided Approach for Environmental Studies

DEFF Research Database (Denmark)

Gani, Rafiqul; Chen, Fei; Jaksland, Cecilia

1997-01-01

A general framework for an integrated computer-aided approach to solve process design, control, and environmental problems simultaneously is presented. Physicochemical properties and their relationships to the molecular structure play an important role in the proposed integrated approach. The sco...... and applicability of the integrated approach is highlighted through examples involving estimation of properties and environmental pollution prevention. The importance of mixture effects on some environmentally important properties is also demonstrated....

Performance Analysis of Solar Combined Ejector-Vapor Compression Cycle Using Environmental Friendly Refrigerants

Directory of Open Access Journals (Sweden)

A. B. Kasaeian

2013-04-01

Full Text Available In this study, a new model of a solar combined ejector-vapor compression refrigeration system has been considered. The system is equipped with an internal heat exchanger to enhance the performance of the cycle. The effects of working fluid and operating conditions on the system performance including COP, entrainment ratio (ω, compression ratio (rp and exergy efficiency were investigated. Some working fluids suggested are: R114, R141b, R123, R245fa, R600a, R365mfc, R1234ze(e and R1234ze(z. The results show that R114 and R1234ze(e yield the highest COP and exergy efficiency followed by R123, R245fa, R365mfc, R141b, R152a and R600a. It is noticed that the COP value of the new solar ejector-vapor compression refrigeration cycle is higher than that of the conventional ejector cycle with R1234ze(e for all operating conditions. This paper also demonstrates that R1234ze(e will be a suitable refrigerant in the solar combined ejector-vapor compression refrigeration system, due to its environmental friendly properties and better performance. ABSTRAK: Kajian ini menganalisa model baru sistem penyejukan mampatan gabungan ejektor-wap solar.Sistem ini dilengkapi dengan penukar haba dalaman untuk meningkatkan prestasi kitaran.Kesan bendalir bekerja dan keadaan operasi pada prestasi sistem termasuk COP, nisbah pemerangkapan (ω, nisbah mampatan (rp dan kecekapan eksergi telah disiasat.Beberapa bendalir bekerja yang dicadangkan adalah: R114, R141b, R123, R245fa, R600a, R365mfc, R1234ze(e dan R1234ze(z.Hasil kajian menunjukkan R114 dan R1234ze(e menghasilkan COP dan kecekapan eksergi tertinggi diikuti oleh R123, R245fa, R365mfc, R141b, R152a dan R600a.Didapati nilai COP kitaran penyejukan mampatan bagi ejektor-wap solar baru adalah lebih tinggi daripada kitaran ejektor konvensional dengan R1234ze(e bagi semua keadaan operasi.Kertas kerja ini juga menunjukkan bahawa R1234ze(e boleh menjadi penyejuk yang sesuai dalam sistem penyejukan mampatan gabungan ejektor

Choice of organic foods is related to perceived consequences for human health and to environmentally friendly behaviour.

Science.gov (United States)

Magnusson, Maria K; Arvola, Anne; Hursti, Ulla Kaisa Koivisto; Aberg, Lars; Sjödén, Per-Olow

2003-04-01

We designed a questionnaire concerned with attitudes and behaviour towards organic foods, environmentally friendly behaviour (EFB), and perceived consequences of organic food choice in terms of human health, the environment and animal welfare. It was mailed in 1998 to a random nation-wide sample of 2000 Swedish citizens, ages 18-65 years, and 1154 (58%) responded. Self-reported purchase of organic foods was most strongly related to perceived benefit for human health. Performance of EFBs such as refraining from car driving was also a good predictor of purchase frequency. The results indicate that egoistic motives are better predictors of the purchase of organic foods than are altruistic motives.

Simple gases to replace non-environmentally friendly polymer foaming agents. A thermodynamic investigation

International Nuclear Information System (INIS)

Grolier, Jean-Pierre E.; Randzio, Stanislaw L.

2012-01-01

Highlights: ► The PVT-vibrating wire technique and PVT-scanning transitiometry. ► Polymer swelling with measured gas sorption and gas–polymer interaction energies. ► Experimental measurements up to 373 K and 100 MPa. ► Hydrostatic and plasticization effects under high pressure gas and induced T g -shifts. ► Thermodynamic study of the (gas + polymer) systems polystyrene with CO 2 , N 2 , and freons. - Abstract: Foaming constitutes one of the most important industrial activities in polymer engineering to produce efficient thermal insulating materials. In particular, rigid insulating boards are produced worldwide on a large scale using blowing agents which eventually are released in the environment where they adversely impact the natural friendly stratospheric ozone layer. Concomitantly, the chemicals used as blowing agents contribute to the creation of the unfriendly tropospheric ozone layer generating the disastrous green house effect around our planet. The traditional foaming intermediates currently named freons, like chlorofluorocarbons (CFCs) currently used as blowing agents as well as the hydrochlorofluorocarbons (HCFCs) often considered as alternative blowing agents, must be banned from industrial processes and new (friendly) foaming agents have to be suggested and evaluated in terms of both easy engineering and environmental neutrality. Undoubtedly thermodynamics plays a major role in assessing the effective capability of those chemicals. Some CFCs still accepted and other possible simple gases like carbon dioxide and nitrogen have been considered. The in-depth thermodynamic investigation has been made possible thanks to new experimental developments to determine gas solubility in polymers and associated swelling as well as the thermodynamic properties of (gas + polymer) systems, including the thermophysical properties of polymers under gas sorption. Pertinent data have been generated for such properties over extended T and p ranges.

Environmentally friendly procedure based on VA-MSPD for the determination of booster biocides in fish tissue.

Science.gov (United States)

Vieira, Augusto A; Caldas, Sergiane S; Escarrone, Ana Laura Venquiaruti; Arias, Jean Lucas de Oliveira; Primel, Ednei Gilberto

2018-03-01

Booster biocides have been widely applied to ships and other submerged structures. These compounds can be released into the marine environment as the result of vessel hull leaching and may remain in different environmental compartments. This study aimed at introducing an environmentally friendly procedure for the extraction of irgarol and diuron from fish samples by vortex-assisted matrix solid phase dispersion (VA-MSPD) with detection by liquid chromatography tandem mass spectrometry. Different types of solid supports and solvents were evaluated. The best results were found when 0.5g mussel shell, 0.5g sodium sulfate and 5mL ethanol were used. Analytical recoveries ranged from 81 to 110%, with RSD below 10%, whereas the matrix effect was between -17 and 1% (for all samples under study). LOQ values of irgarol and diuron were 5 and 50ngg -1 , respectively. The method under investigation proved to be a promising alternative to controlling contamination of fish by booster biocides, with low consumption of biodegradable reagents. Copyright © 2017 Elsevier Ltd. All rights reserved.

Eco-friendly Retail Product Attributes, Customer Attributes and the Repurchase Intentions of South African Consumers

OpenAIRE

Job Dubihlela; Tandiswa Ngxukumeshe

2016-01-01

Purpose –Consumers are becoming progressively aware of the significance of eco-friendly activities, and their environmental consciousness drives them to consume eco-friendly products and services more, and prefer to support organisations that favor conservational practices. Increased environmental impacts bring a rise in concerns locally and globally, on sustainability issues aimed at reducing non-conservative consumption patterns. Retail organisations are increasingly developing and marketin...

Comparative analysis of thermally activated, environmentally friendly cooling systems

International Nuclear Information System (INIS)

Gupta, Y.; Metchop, L.; Frantzis, A.; Phelan, P.E.

2008-01-01

This paper compares the relative performances of three different thermally activated, environmentally friendly cooling systems, e.g. a silica-gel-water adsorption system, a LiBr-H 2 O absorption system and a desiccant air system. The adsorption and absorption systems in the current study employ water as the refrigerant, while the desiccant system cools atmospheric air directly. Each of these systems can be utilized at relatively low heat source temperatures such as achieved by flat plate solar collectors, but it is unclear which of these systems is best suited to what range of heat source temperature. Our study explores answers to this question by generating quantitative results comparing their relative thermal performance, i.e. COP and refrigeration capacity, and a qualitative comparison based on the size, maturity of technology, safe operation etc. In order to provide a fair comparison between the fundamentally different systems, a UA (overall heat transfer coefficient multiplied by the heat transfer area) value of 1.0 kW deg. C -1 is considered for the heat exchanger that transfers heat from the supplied hot water. Furthermore, to compare systems of similar size, the mass of silica-gel in the adsorption and desiccant systems and the mass of LiBr-H 2 O solution in the absorption system were specified such that each system provides the same amount of refrigeration (8.0 kW) at a source temperature of 90 deg. C. It is found that the absorption and adsorption cooling systems have a higher refrigeration capacity at heat source temperatures below 90 deg. C, while the desiccant air system outperforms the others at temperatures above 90 deg. C

A proposed approach to environmental protection

International Nuclear Information System (INIS)

Maloney, R.J.

1997-01-01

The objective of my presentation today is to present our thinking to date on the subject of environmental protection at nuclear facilities. What I intend to present is not a finished product, but the first steps in establishing a new and systematic approach to environmental protection. An important factor that will affect the progress of this process is the current assessment of radionuclides (released from nuclear facilities) under the aegis of the Canadian Environmental Protection Act (CEPA). It is expected that the CEPA assessment will take in the order of two years to complete. In keeping with this schedule, we expect the overall process of establishing a new and systematic approach to environmental protection to be a long-term project taking up to five years to complete. It will start with the establishment of an AECB policy regarding environmental protection and continue with the development of programs, procedures, guides, standards and criteria to implement the policy. (author)

Functionalization and Dispersion of Carbon Nanomaterials Using an Environmentally Friendly Ultrasonicated Ozonolysis Process.

Science.gov (United States)

Yeo, Eudora S Y; Mathys, Gary I; Brack, Narelle; Thostenson, Erik T; Rider, Andrew N

2017-05-30

Functionalization of carbon nanomaterials is often a critical step that facilitates their integration into larger material systems and devices. In the as-received form, carbon nanomaterials, such as carbon nanotubes (CNTs) or graphene nanoplatelets (GNPs), may contain large agglomerates. Both agglomerates and impurities will diminish the benefits of the unique electrical and mechanical properties offered when CNTs or GNPs are incorporated into polymers or composite material systems. Whilst a variety of methods exist to functionalize carbon nanomaterials and to create stable dispersions, many the processes use harsh chemicals, organic solvents, or surfactants, which are environmentally unfriendly and may increase the processing burden when isolating the nanomaterials for subsequent use. The current research details the use of an alternative, environmentally friendly technique for functionalizing CNTs and GNPs. It produces stable, aqueous dispersions free of harmful chemicals. Both CNTs and GNPs can be added to water at concentrations up to 5 g/L and can be recirculated through a high-powered ultrasonic cell. The simultaneous injection of ozone into the cell progressively oxidizes the carbon nanomaterials, and the combined ultrasonication breaks down agglomerates and immediately exposes fresh material for functionalization. The prepared dispersions are ideally suited for the deposition of thin films onto solid substrates using electrophoretic deposition (EPD). CNTs and GNPs from the aqueous dispersions can be readily used to coat carbon- and glass-reinforcing fibers using EPD for the preparation of hierarchical composite materials.

Environmentally friendly production of charcoal from empty fruit bunches using pilot plant

International Nuclear Information System (INIS)

Normah Mulop; Mohd Suffian Abdul Rahim

2000-01-01

Empty fruit bunches (EFB) from palm oil milling process are classified as palm oil waste. The EFB can be turned into valuable product such as charcoal, which can be processed further to activated carbon in order to solve some of the disposal problems. In this project, raw EFB was converted to charcoal by means of a pilot plant. A burner generating indirect heat controls the temperature of the process. The carbonization process was carried out in the absence of air at various temperatures and durations to find the optimum carbonization parameters. The study shows that the optimum operating, temperature for carbonization of EFB is 500 o C for the duration of 11/2 hours. The average fixed carbon content of the charcoal is 61.08. The high percentage of volatile matter is prevented from escaping into the air by trapping them in a series of cyclones. The double layered cyclones using water as the cooling medium, condense more volatile matter and reduces smoke exhaust. 50.7 % of ,gaseous product is condensed and 49.2 % is emitted to the atmosphere. The result is an environmental friendly pilot plant. (author)

A qualitative approach to economic-environmental dispatch

International Nuclear Information System (INIS)

Gjengedal, T.; Hansen, O.; Johansen, S.

1992-01-01

This paper describes the principles, and suggests a methodology for expanding the dispatch of electrical power production systems for involving a pure minimum cost dispatch, to also include environmental objectives. The approach is qualitative in that no attempt is made as to assign a specific monetary value to environmental impacts, but rather maintaining the physical value of the impact through the decision process. However, the initial relative weights assigned to environmental impacts in the methodology are based on the many recent attempts to monetize environmental damages. The main contribution of the approach is to analyze how dispatch changes as a function of the total environmental weight, and as a function of the relative weighing of individual environmental insults, e.g., SO 2 , NO x and CO 2 . The methodology is illustrated with a sample production system involving environmental coast estimates from major US studies

Enhancing Environmental Friendliness through Mobile Phone ...

African Journals Online (AJOL)

Enhancing Environmental Friendliness through Mobile Phone Learning. ... Journal Home > Vol 18, No 1 (2014) > ... Environmental friendly or eco-friendly refers to products or processes that are not harmful to the environment and people who ...

[Environmental justice as an approach to tackle environmental health inequalities].

Science.gov (United States)

Bolte, Gabriele; Bunge, Christiane; Hornberg, Claudia; Köckler, Heike

2018-06-01

Current international studies show that environment-related diseases disproportionately affect vulnerable people. This is a case of environmental injustice. Environmental justice goes beyond the mere description of environment- and health-related social inequalities by comprising two dimensions of justice as a normative approach: distributional and procedural justice. Attempts to explain the link between social circumstances, the environment and health deal with both the socially unequal distribution of environmental hazards and environmental resources (exposure variation) and social differences in vulnerability to the health effects of environmental exposures (effect modification). Integrated monitoring approaches provide the basis for deriving interventions under various aspects of environmental justice. Parting from public health research and embedded in the Health in All Policies (HiAP) concept, environmental justice has now been taken up in a number of fields, including politics, administration and practice. There are strategic considerations and attempts to anchor it in politics at the federal, state and the communal level, both by government and non-government groups. Health-promoting urban development is a core field for intervention. The Soziale Stadt (Social City) programme for promoting urban planning and construction as well as place oriented sectoral planning make an important contribution by helping to focus on urban spaces with multiple health hazards and to implement target group-oriented participation processes. There continues to be a need to develop methods and systematically implemented evaluations of political strategies and corresponding interventions regarding their effects on inequalities in health and environmental justice.

Environmentally friendly preparation of pectins from agricultural byproducts and their structural/rheological characterization.

Science.gov (United States)

Min, Bockki; Lim, Jongbin; Ko, Sanghoon; Lee, Kwang-Geun; Lee, Sung Ho; Lee, Suyong

2011-02-01

Apple pomace which is the main waste of fruit juice industry was utilized to extract pectins in an environmentally friendly way, which was then compared with chemically-extracted pectins. The water-based extraction with combined physical and enzymatic treatments produced pectins with 693.2 mg g(-1) galacturonic acid and 4.6% yield, which were less than those of chemically-extracted pectins. Chemically-extracted pectins exhibited lower degree of esterification (58%) than the pectin samples obtained by physical/enzymatic treatments (69%), which were also confirmed by FT-IR analysis. When subjected to steady-shear rheological conditions, both pectin solutions were shown to have shear-thinning properties. However, decreased viscosity was observed in the pectins extracted by combined physical/enzymatic methods which could be mainly attributed to the presence of more methyl esters, thus limiting polymer chain interactions. Moreover, the pectins which were extracted by combined physical/enzymatic treatments, showed less elastic properties under high shear rate conditions, compared to the chemically-extracted pectins. Copyright © 2010 Elsevier Ltd. All rights reserved.

PAN-Immobilized PVC-NPOE Membrane for Environmentally Friendly Sensing of Cd(II Ions

Directory of Open Access Journals (Sweden)

Moersilah Moersilah

2017-04-01

Full Text Available A simple, cheap and environmentally friendly analytical method of Cd(II in the aqueous system has been developed by immobilization of 1-(2-pyridilazo-2-naphtol (PAN in poly vinyl chloride (PVC matrix and nitrophenyl octyl ether (NPOE as a plasticizer. Upon contact with Cd(II in solution, the color of sensor membrane changes from dark yellow to dark red, which is due to the formation of Cd(II–PAN complex. The best sensing results were obtained at pH 8.0 and λmax 558 nm. The dimension of the proposed sensor membrane was 0.8 cm x 2 cm with a thickness of 0.05 mm, the volume of sample was 2 mL with the Cd(II concentration range of  0 – 1.2 ppm. The limit of detection of the method was found to be 0.432 + 0.104 ppm, which was reversible. The proposed methods have been applied in the determination of Cd(II in water samples after addition of internal standard.

Environmental education and indigenous approach

International Nuclear Information System (INIS)

Babar, S.M.; Hussain, M.; Mahmood, T.

2005-01-01

Environmental pollution control is the most important and highly discussed issue at the international level. Our and our's next generation survival highly depends on environment. Environmental security is not less important than territorial security. Living in the Competitive trade, Business and Commerce era. WTO threats of globalization to countries like Pakistan require sharp and immediate actions. SOS(Save our Sole) steps should be taken in Environmental Education in order to reorganizing values and clarifying Concepts to develop the necessary skills and attitude necessary to understand and appreciate the interrelatidness among masses, the Cultures and Ecosystem. Historical backgrounds along with different approaches were discussed particularly reference to Pakistan. In this presentation a new but indigenous idea is flashed to improve the environment education system in poor third world countries including Pakistan. Instead of imported ideas, previous implemented as such, indigenous approach highly Perfumed with Islamic, Ideological and cultural blends will do the right job in right direction if employed with true sense of commitment. (author)

Geothermal and Trigeneration Systems as Innovative and EnvironmentallyFriendly Solutions for Telecommunication Plant Cooling

Directory of Open Access Journals (Sweden)

Paolo Trotta

2016-12-01

Full Text Available The paper deals with a model-based analysis of innovative cooling systems, to be deployed in telecommunication (TLC plants in consideration of their size, geographical location and typology (e.g. central Offices or data-centers. Environmentally friendly systems, such as geothermal heat pumps and trigeneration plants, were considered. The trade-off between the investment and operating costs was first analyzed, followed by a comparative evaluation of economic savings achievable via each candidate solution with respect to reference benchmarks, here represented by traditional air-water heat pump and conventional interaction with electrical grid. In this way, a preliminary macroscopic assessment of the best solutions was accomplished, according to the different scenarios (i.e. small or big TLC plant under investigation. A more detailed analysis, concerning the comparison between traditional and geothermal systems, was specifically carried out to evaluate savings as a function of the external temperature and, consequently, of geographical location.

Application and Development of an Environmentally Friendly Blast Hole Plug for Underground Coal Mines

Directory of Open Access Journals (Sweden)

Donghui Yang

2018-01-01

Full Text Available Drilling and blasting technology is one of the main methods for pressure relief in deep mining. The traditional method for blasting hole blockage with clay stemming has many problems, which include a large volume of transportation, excess loading time, and high labor intensity. An environmentally friendly blast hole plug was designed and developed. This method is cheap, closely blocks the hole, is quickly loaded, and is convenient for transportation. The impact test on the plug was carried out using an improved split Hopkinson pressure bar test system, and the industrial test was carried out in underground tunnel of coal mine. The tests results showed that, compared with clay stemming, the new method proposed in this paper could prolong the action time of the detonation gas, prevent premature detonation gas emissions, reduce the unit consumption of explosives, improve the utilization ratio, reduce the labor intensity of workers, and improve the effect of rock blasting with low cost of rock breaking.

Customer-friendly Approach or Pidginization of German Tourist Discourse

Directory of Open Access Journals (Sweden)

Brigita Bosnar-Valkovic

2012-02-01

Full Text Available If the sentences or phrases like Fast Food-Konzept in Chile, Leonardo goes Gastronomie, Der Claim „Inspiration for modern living“, WM-Countdown läuft; Deutschland ist die fünftgrößte Incoming-Destination weltweit und … are considered, the first impression is that this is a typical mixture of both English and German. To all intents and purposes, they support the main part of a definition of pidgin language. Communication plays a central role in tourism. As emphasized by numerous authors, it is a personification of tourism; conversely tourism could be said to totally encompass a system of communication. As it is a crucial component of the industry, tourist discourse not only serves as a medium for buying/selling tourist products, it also assumes the role of the product itself within the complexity of various economic, technological and political processes in tourism. If analyzed within linguistic norms, discussion of Anglo-American influence on the German tourist discourse should focus on the problem of erosion of the national language, due to the impact of these Ango-Americanisms. The German tourist discourse aims at a customer-friendly approach in order to attract potential buyers or guests, all of which results in a slightly pidginized version of the German tourist discourse.

Nuclear power: an eco friendly energy source for sustainable development

International Nuclear Information System (INIS)

Obaidurrahman, K.; Singh, Om Pal

2009-01-01

When viewed from a large set of criteria such as abundance of energy resources, environmental impacts, low fuel inventory, quantum of waste generated and green house gas emissions, nuclear power can be considered as a large scale sustainable energy source. Among all energy sources, nuclear energy has perhaps the lowest impact on the environment, especially in relation to kilowatt-hr produced, because nuclear plants do not emit harmful gases and produce small quantity of waste. In other words, nuclear energy is the most environmental friendly electricity source. There are no significant adverse effects to water, land, habitat, species and air resources. The present paper discusses the sustainability and feasibility of nuclear power as an eco friendly energy source in the changing and challenging competitive power market. (author)

Toward "Age-Friendly Slums"? Health Challenges of Older Slum Dwellers in Nairobi and the Applicability of the Age-Friendly City Approach.

Science.gov (United States)

Aboderin, Isabella; Kano, Megumi; Owii, Hilda Akinyi

2017-10-20

A majority of urban residents in sub-Saharan Africa (SSA) and other developing regions live in informal settlements, or slums. Much of the discourse on slum health centres on younger generations, while an intensifying agenda on healthy ageing as yet lacks a systematic focus on slums. Similarly, the global age-friendly cities (AFC) movement does not, thus far, extend to slums. This paper examines the particular challenges that a slum-focused age-friendly initiative in SSA may need to address, and the relevance of present AFC indicators and domains for initiatives to advance the health and well-being of older slum dwellers. The analysis builds on the case of two slum communities in Nairobi, Kenya. It analyzes two bodies of relevant evidence from these settlements, namely on the health and social circumstances of older residents, and on the local application and measurement of AFC indicators. The findings point to a set of unsurprising, but also less obvious, core health and social adversities that an age-friendly initiative in such settlements would need to consider. The findings show, further, that the current AFC domains and indicators framework only partly capture these adversities, but that there is potential for adapting the framework to be meaningful for slum settings. The paper concludes by underscoring the need for, and opportunities inherent in, the pursuit of an "age-friendly slums" initiative going forward.

Synthesis, characterization and evaluation cytotoxic activity of silver nanoparticles synthesized by Chinese herbal Cornus officinalis via environment friendly approach.

Science.gov (United States)

He, Yangqing; Li, Xing; Wang, Ju; Yang, Qian; Yao, Binghua; Zhao, Yingjuan; Zhao, Aiming; Sun, Wenxing; Zhang, Qian

2017-12-01

Cornus officinalis has been widely used as a precious herb and as the tonic food to improve kidney function in China. Its fruits have been used in many traditional Chinese medicine prescriptions to treat kidney diseases, diabetes, cancer and shock. In this study, a new eco-friendly approach for green synthesis of silver nanoparticles (AgNPs) by using the fruits of Cornus officinalis aqueous extract as a reducing and stabilizing agent. The so-synthesized AgNPs showed quasi-spherical in shape with uniform dispersal and an average mean size of 11.7nm. Water soluble biomolecules such as flavonoids and/or anthocyanins from the extract played important roles in the nanoparticles formation. The AgNPs displayed distinctive cytotoxicity activities against human prostate cancer (PC-3) and human liver cancer (HepG2) cell lines. The results provided a low cost, nontoxic and eco-friendly approach for synthesizing metal nanoparticles to explore alternative anticancer agents on the way fighting against cancer in future. Copyright © 2017 Elsevier B.V. All rights reserved.

Camarines Sur Polytechnic Colleges Philippines An Eco-Friendly School Model

Directory of Open Access Journals (Sweden)

Dr. Jose Ariel R. Ibarrientos

2015-03-01

Full Text Available Abstract Academic institutions can become more environmentally responsible through the implementation of various conservation initiative. Along this the study attempt to transform the Camarines Sur Polytechnic Colleges into living models of an ecologically sustainable learning institutions. Data was gathered from among the six administrators 336 students 62 teaching and 31 non-teaching personnel from school year 2013-2014. Questionnaire supported by interview and ocular inspection was utilized to assess the college practices along its environmental policy resource management curriculum project and budget. Results revealed that the college has an Eco Friendly Program and has implemented guidelines along solid Waste Management in Classrooms and Laboratories. Awareness on environmental policy resource management in classrooms buildings and grounds purchasing use of lights and electricity paper conservation water conservation waste management were highly implemented HI. Maintenance on air quality and waste management in the canteen were moderately implemented MI in the college. Generally the college are Aware A along environmental programs and highly implement HI its environmental practices. T-test result shows that there was no significant difference between the level of awareness and implementation on environmental practices. The proposed Eco-Friendly School Model developed by the researcher must be adopted by the college.

Implementing the WHO/UNICEF Baby Friendly Initiative in the community: a 'hearts and minds' approach.

Science.gov (United States)

Thomson, Gill; Bilson, Andy; Dykes, Fiona

2012-04-01

to describe a 'hearts and minds' approach to community Baby Friendly Initiative implementation developed from the views of multidisciplinary professionals. a qualitative descriptive study utilising focus groups and interviews, with thematic networks analysis conducted. forty-seven professionals were consulted from two primary health-care facilities located in the North-West of England. thematic networks analysis generated a global theme of a 'hearts and minds approach' to BFI implementation, which embodies emotional and rational engagement. The three underpinning organising themes (and their associated basic themes): 'credible leadership', 'engagement of key partners' and 'changing attitudes and practice' reflect the context, processes and outcomes of a 'hearts and minds' approach. a 'hearts and minds' approach transcends the prescriptive aspects of a macro-level intervention with its emphasis upon audits, training, statistics and 'hard' evidence through valuing other professionals and engaging staff at all levels. It offers insights into how organisational change may move beyond traditional top-down mechanisms for driving change to incorporate ways that value others and promote cooperation and reflection. Copyright © 2011 Elsevier Ltd. All rights reserved.

A Two-Wheeled, Self-Balancing Electric Vehicle Used As an Environmentally Friendly Individual Means of Transport

Science.gov (United States)

Bździuch, D.; Grzegożek, W.

2016-09-01

This paper shows a concept of a model of a two-wheeled self-balancing vehicle with an electric motor drive as an environmentally-friendly personal transporter. The principle of work, modelling of construction and performing a simulation are presented and discussed. The visualization of the designed vehicle was made thanks to using Solid Works a computer-aided design program. The vehicle was modelled as an inverted pendulum. The stability of the mechanism in the equilibrium position was studied. An exemplary steering system was also subjected to the analysis that compared two controllers: PID and LQR which enabled to monitor the balance of the vehicle when the required conditions were fulfilled. Modelling of work of the controllers and the evaluation of the obtained results in required conditions were performed in the MATLAB environment.

Incentives for development and application of environmentally friendly biotechnological products and processes; Anreize fuer die Entwicklung und Anwendung umweltfreundlicher biotechnischer Produkte und Verfahren

Energy Technology Data Exchange (ETDEWEB)

Rhein, Hans-Bernhard; Endler, Katharina [Umweltkanzlei Dr. Rhein, Sarstedt (Germany); Ulber, Roland; Muffler, Kai; Mueller, Felix [Technische Univ. Kaiserslautern (Germany)

2011-01-15

Studies assign a tremendous growth potential related to biotechnology. However, the predicted proportion of biotechnological manufactured products in the chemical industry for the year 2010 by 20 % will more likely remain by today's 5 %. The study deals with the question why biotechnological products are currently established at the market in the obvious slow way. Therefore, the current constraints and existing respectively new incentive instruments referring to the white (industrial) biotechnology are analyzed to focus on the promotion of the development and application of environmentally friendly biotechnology products and methods. In addition to a search concerning environmental relevance and further development of white biotechnology, the postulated constraints and incentives as well as new promotions are discussed with the help of expert interviews. On the basis of a preliminary study - after further discussion with experts - concrete proposals on improvements related to an ongoing establishment of biotechnology will be derived. Based on case studies (2nd generation biofuels, polyhydroxybutyrate as biopolymer and phytase as an animal feed additive), the practical effects and specific conditions to incentives, from the perspective of biotechnological processes and environmentally friendly products are investigated. Overall, about 40 activities were recommended, which could be assigned to areas of direct government incentives (tax policy/subsidies, subsidies, education and research policy, basic political conditions, government demand and information policy/consumer intelligence) as well as non-governmental incentives (knowledge transfer and cooperation, organisation-related policy, capital market financing). (orig.)

Incentives for development and application of environmentally friendly biotechnological products and processes; Anreize fuer die Entwicklung und Anwendung umweltfreundlicher biotechnischer Produkte und Verfahren

Energy Technology Data Exchange (ETDEWEB)

Rhein, Hans-Bernhard; Endler, Katharina [Umweltkanzlei Dr. Rhein, Sarstedt (Germany); Ulber, Roland; Muffler, Kai; Mueller, Felix [Technische Univ. Kaiserslautern (Germany)

2011-01-15

Studies assign a tremendous growth potential related to biotechnology. However, the predicted proportion of biotechnological manufactured products in the chemical industry for the year 2010 by 20 % will more likely remain by today's 5 %. The study deals with the question why biotechnological products are currently established at the market in the obvious slow way. Therefore, the current constraints and existing respectively new incentive instruments referring to the white (industrial) biotechnology are analyzed to focus on the promotion of the development and application of environmentally friendly biotechnology products and methods. In addition to a search concerning environmental relevance and further development of white biotechnology, the postulated constraints and incentives as well as new promotions are discussed with the help of expert interviews. On the basis of a preliminary study - after further discussion with experts - concrete proposals on improvements related to an ongoing establishment of biotechnology will be derived. Based on case studies (2nd generation biofuels, polyhydroxybutyrate as biopolymer and phytase as an animal feed additive), the practical effects and specific conditions to incentives, from the perspective of biotechnological processes and environmentally friendly products are investigated. Overall, about 40 activities were recommended, which could be assigned to areas of direct government incentives (tax policy/subsidies, subsidies, education and research policy, basic political conditions, government demand and information policy/consumer intelligence) as well as non-governmental incentives (knowledge transfer and cooperation, organisation-related policy, capital market financing). (orig.)

Environmental management: A system approach

Science.gov (United States)

Petak, William J.

1981-05-01

This paper presents a system framework whose purpose is to improve understanding of environmental management. By analyzing the links between elements of the environmental management system, it is possible to construct a model that aids thinking systematically about the decision-making subsystem, and other subsystems, of the entire environmental management system. Through a multidisciplinary environmental approach, each of the individual subsystems is able to adapt to threats and opportunities. The fields of government, market economics, social responsibility and ecology, for example, are so complex that it is extremely difficult to develop a framework that gives full consideration to all aspects. This paper, through the application of a highly idealized system framework, attempts to show the general relationships that exist between complex system elements.

A review on the geoenvironmental and geoecological integrated technology for environmental remediation in Vietnam: approaches, contributions, challenges and perspectives

Science.gov (United States)

Trong Nhuan, Mai; Hoang Ha, Nguyen Thi; Hoai, Ta Thi; Dang Quy, Tran

2017-06-01

Geoenvironmental and geoecological integrated technology (GGIT) is a cost-effective and environment-friendly technology that encompasses the applications of earth science principles and functions of geological environment and ecosystems to assimilate and minimize the spread of pollutants, to enhance the sorption capacity and environmental remediation. On the basis of the integrated approaches such as system, anthropogenic activities - ecosystem - environment interaction, effectiveness and feasibility, GGIT has provided significant applications in Vietnam such as waste containment and remediation and environmental protection. The results of a pilot scale using iron mine drainage sludge and common reed (Phragmites australis) for wastewater treatment in a Pb-Zn mine in northern Vietnam indicated the effective and potential application of GGIT. However, GGIT has many challenges in limited funding conditions, constraints in the initial development of GGIT, incomplete transfer to users, and quantitative assessment of pollutant cleanup by natural environments and ecosystems. Environmental pollution quote, impacts to exposed organisms, increasing demands for application of low-cost technologies, the availability of potential sorbents, indigenous plants, and ecosystems for environmental remediation, and collaboration will promote development, contribution, and implementation of GGIT applications in Vietnam.

Investigation of environmental friendly Te-free SiSb material for applications of phase-change memory

International Nuclear Information System (INIS)

Zhang Ting; Song Zhitang; Liu Bo; Feng Songlin

2008-01-01

Te-free environmental friendly Si x Sb 100−x phase-change materials are investigated. The binary material, which is compatible with the complementary metal-oxide-semiconductor manufacturing process, is outstanding in various properties. Si x Sb 100−x shows a much better data retention as compared with Ge 2 Sb 2 Te 5 . The density change for Si 10 Sb 90 and Si 16 Sb 84 is only about 3% and 3.8%, respectively. The failure times for Si 10 Sb 90 and Si 16 Sb 84 are about 10 3 and 10 6 times longer than that of Ge 2 Sb 2 Te 5 at 110 °C. The crystallization temperature of Si x Sb 100−x increases with silicon content within the material. Si x Sb 100−x materials are good candidates for the phase-change memory applications

arXiv Candidate eco-friendly gas mixtures for MPGDs

CERN Document Server

Benussi, L.; Saviano, G.; Muhammad, S.; Ferrini, M.; Primavera, F.; Parvis, M.; Grassing, S.; Colafranceschi, S.; Kjøbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.

2018-01-01

Modern gas detectors for detection of particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This review studies properties of potential eco-friendly gas candidate replacements.

Intermediate peer contexts and educational outcomes: Do the friends of students' friends matter?

Science.gov (United States)

Carbonaro, William; Workman, Joseph

2016-07-01

Sociologists of education have long been interested in the effects of peer relations on educational outcomes. Recent theory and research on adolescence suggest that peers on the boundaries of students' friendship networks may play an important role in shaping behaviors and educational outcomes. In this study, we examine the importance of a key "intermediate peer context" for students' outcomes: the friends of a student's friends. Our findings indicate both friends' and friends' friends' characteristics independently predict students' college expectations and their risk of dropping out of high school (although only friends' characteristics predict GPA). Our models suggest the magnitude of students' friends-of-friends' characteristics are at least as large their friends' characteristics. Together, the association between the peer context and students outcomes is considerably larger when accounting for both the characteristics of students' friends and the friends of their friends. Copyright © 2016 Elsevier Inc. All rights reserved.

Tribological Evaluation of Date Palm Fruit Syrup–A Potential Environmental-Friendly Lubricant

Directory of Open Access Journals (Sweden)

Abdul Samad Mohammed

2017-07-01

Full Text Available Date palm is one of the most cultivated palms mostly found in the Middle Eastern regions of the world. The date palm fruits are not only nutritionally rich, but also have a good amount of fatty acids such as oleic acid, palmitic acid, and linoleic acids, which have excellent anti-wear and lubricating properties, making it a potentially good candidate to be used as an environmentally-friendly lubricant. This study is a preliminary effort to explore the lubricating properties of date palm fruit syrup by conducting ball-on-disc wear tests on mild steel samples. Different concentrations (50, 75, and 100 vol % of the syrup in water were tested at a normal load of 50 N and a sliding linear speed of 0.1 m/s. Scanning electron microscopy and optical profilometry were used to characterize the wear tracks and estimate the wear rates. 100 vol % date syrup with a viscosity of 16.95 mPa·s showed excellent results by reducing the coefficient of friction of steel-on-steel from 0.6 (dry conditions to a value of ~0.1. The depth of the wear track reduced from ~152 µm (dry conditions to ~11 µm, signifying a considerable reduction in wear.

Romantic Partners, Friends, Friends with Benefits, and Casual Acquaintances As Sexual Partners

Science.gov (United States)

Furman, Wyndol; Shaffer, Laura

2011-01-01

The purpose of the present study was to provide a detailed examination of sexual behavior with different types of partners. A sample of 163 young adults reported on their light nongenital, heavy nongenital, and genital sexual activity with romantic partners, friends, and casual acquaintances. They described their sexual activity with “friends with benefits” as well as with friends in general. Young adults were most likely to engage in sexual behavior with romantic partners, but sexual behavior also often occurred with some type of nonromantic partner. More young adults engaged in some form of sexual behavior with casual acquaintances than with friends with benefits. The frequencies of sexual behavior, however, were greater with friends with benefits than with friends or casual acquaintances. Interview and questionnaire data revealed that friends with benefits were typically friends, but not necessarily. Nonsexual activities were also less common with friends with benefits than other friends. Taken together, the findings illustrate the value of differentiating among different types of nonromantic partners and different levels of sexual behavior. PMID:21128155

Design of environmentally friendly products using indicators

DEFF Research Database (Denmark)

Lenau, Torben Anker; Bey, Niki

2001-01-01

The paper describes the requirements of product designers towards methods for environmental evaluation; it argues that indicators can be used for rough environmental evaluations and it presents experiences made with the indicator-based Oil Point Method (OPM). This method is illustrated by means...

Toward “Age-Friendly Slums”? Health Challenges of Older Slum Dwellers in Nairobi and the Applicability of the Age-Friendly City Approach

Science.gov (United States)

Aboderin, Isabella; Owii, Hilda Akinyi

2017-01-01

A majority of urban residents in sub-Saharan Africa (SSA) and other developing regions live in informal settlements, or slums. Much of the discourse on slum health centres on younger generations, while an intensifying agenda on healthy ageing as yet lacks a systematic focus on slums. Similarly, the global age-friendly cities (AFC) movement does not, thus far, extend to slums. This paper examines the particular challenges that a slum-focused age-friendly initiative in SSA may need to address, and the relevance of present AFC indicators and domains for initiatives to advance the health and well-being of older slum dwellers. The analysis builds on the case of two slum communities in Nairobi, Kenya. It analyzes two bodies of relevant evidence from these settlements, namely on the health and social circumstances of older residents, and on the local application and measurement of AFC indicators. The findings point to a set of unsurprising, but also less obvious, core health and social adversities that an age-friendly initiative in such settlements would need to consider. The findings show, further, that the current AFC domains and indicators framework only partly capture these adversities, but that there is potential for adapting the framework to be meaningful for slum settings. The paper concludes by underscoring the need for, and opportunities inherent in, the pursuit of an “age-friendly slums” initiative going forward. PMID:29053576

Clean and Selective Catalytic C-H alkylation of Alkenes with Environmental friendly Alcohols

KAUST Repository

Poater, Albert

2016-09-14

Bearing the alkylation of alkene substrates using alcohol as solvent, catalysed by the cationic Ru-based catalyst [(C6H6)(PCy3)(CO)RuH]+, DFT calculations have been carried out to get mechanistic insights of such an environmental friendly reaction. Hard experimental conditions of Yi and coworkers [Science2011, 333, 1613] allow the formation of a C-C bond between indene and ethanol. The predicted mechanism suggests a cationic Ru-alkenyl species once two equivalents of indene interact releasing a molecule of indane subproduct. Then, oxidative addition of the Csingle bondO bond of alcohol to Ru-alkenyl species leads to Ru-alkenyl-alkyl species, followed by the reductive elimination process produces the desired alkylation product and a Ru-hydroxo complex. Finally, vinylic Csingle bondH activation and water elimination regenerates the Ru-alkenyl species. In this paper we present a full description of the complete reaction pathway along with possible alternative pathways, which are predicted to display higher upper barriers. Furthermore, the present study explains the possible reasons for the absence of undesired products such as indene dimer or hydroxylated indene in the experiments.

Analyzing the impact on consumer satisfaction, behavior and at-titudes by using eco-friendly practices and products in Surfers Paradise/Gold Coast city hotels, Australia.

OpenAIRE

Chikita, Maria

2012-01-01

This study explores customer attitude towards environmentally friendly practices by hotels and the impact on customer satisfaction. The research investigates individual’s behavior, attitude, knowledge, satisfaction and willingness to support eco-friendly prac-tices. The hotel industry contributes to the global environmental challenges. Consumers are becoming more aware of the environmental impacts by the hotels and a new market segment of eco-friendly customers has developed. In addition ...

Making Rice Production More Environmentally-Friendly

Directory of Open Access Journals (Sweden)

Norman Uphoff

2016-05-01

Full Text Available Irrigated rice production is one of the most essential agricultural activities for sustaining our global population, and at the same time, one of the agricultural sectors considered most eco-unfriendly. This is because it consumes a larger share of available freshwater resources, competing with varied ecosystems as well as other economic sectors; its paddy fields are responsible for significant emission of greenhouse gases; and the reliance on chemical fertilizers and various agrochemicals contributes to pollution of soils and water systems. These stresses on soils, hydrology and atmosphere are actually not necessary for rice production, which can be increased by modifying agronomic practices though more agroecologically-sound management practices. These, combined under the rubric of the System of Rice Intensification (SRI, can reduce requirements of irrigation water, chemical fertilizer and agrochemicals while increasing paddy yields and farmer’s net incomes. Here we discuss how irrigated rice production can be made more eco-friendly for the benefit of farmers, consumers and the environment. This is achieved by introducing practices that improve the growth and functioning of rice plants’ root systems and enhance the abundance, diversity and activity of beneficial soil organisms that live around plant roots and within the plants themselves as symbiotic endophytes.

Obesogenic environments: environmental approaches to obesity prevention.

Science.gov (United States)

Lipek, Tobias; Igel, Ulrike; Gausche, Ruth; Kiess, Wieland; Grande, Gesine

2015-05-01

Childhood obesity is a major concern for public health. There are multiple factors (e.g., genetic, social, and environmental) that contribute to unhealthy weight gain. Drawing from findings on "obesogenic environments" and core principles of preventive strategies to reduce health inequalities, this paper gives an overview of recent childhood prevention programs that target aspects of the physical environment ("environmental changes"). Out of the ten reviews we screened (including more than 300 studies), we identified very few that addressed aspects of the environment. We focus here on 14 programs that follow different approaches to environmental changes (e.g., access to/quality of playgrounds, changes in school cafeterias). Altering the environment offers opportunities for healthier behaviors and seems to be an effective strategy to prevent childhood obesity. However, the evaluation of those (mostly) multidimensional interventions does not allow drawing firm conclusions about the single effect of environmental changes. We conclude that obesity prevention programs should combine person-based and environmental approaches.

Environmental Sustainability In The Thai Hotel Industry

OpenAIRE

Jirawat Anuwichanont; Panisa Mechinda; Sirivan Serirat; Aurathai Lertwannawit; Nongluck Popaijit

2011-01-01

Nowadays, the growing concern of environmental sustainability does not only influence consumers demand but also how companies run their own business. Consumers are more conscious about the environment and demanding environmental friendly products and services. Consequently, the tourism industry currently faces increasing demands from consumers to achieve levels of environmental responsiveness. Thus, companies strive to implement environmentally friendly and socially responsible practices to g...

Theoretical orientations in environmental planning: An inquiry into alternative approaches

Science.gov (United States)

Briassoulis, Helen

1989-07-01

In the process of devising courses of action to resolve problems arising at the society-environment interface, a variety of planning approaches are followed, whose adoption is influenced by—among other things—the characteristics of environmental problems, the nature of the decision-making context, and the intellectual traditions of the disciplines contributing to the study of these problems. This article provides a systematic analysis of six alternative environmental planning approaches—comprehensive/rational, incremental, adaptive, contingency, advocacy, and participatory/consensual. The relative influence of the abovementioned factors is examined, the occurrence of these approaches in real-world situations is noted, and their environmental soundness and political realism is evaluated. Because of the disparity between plan formulation and implementation and between theoretical form and empirical reality, a synthetic view of environmental planning approaches is taken and approaches in action are identified, which characterize the totality of the planning process from problem definition to plan implementation, as well as approaches in the becoming, which may be on the horizon of environmental planning of tomorrow. The suggested future research directions include case studies to verify and detail the presence of the approaches discussed, developing measures of success of a given approach in a given decision setting, and an intertemporal analysis of environmental planning approaches.

Development of an eco-friendly approach for biogenesis of silver nanoparticles using spores of Bacillus athrophaeus.

Science.gov (United States)

Hosseini-Abari, Afrouzossadat; Emtiazi, Giti; Ghasemi, Seyed Mahdi

2013-12-01

The biological synthesis methods have been emerging as a promising new approach for production of nanoparticles due to their simplicity and non-toxicity. In the present study, spores of Bacillus athrophaeus were used to achieve the objective of developing a green synthesis method of silver nanoparticles. Enzyme assay revealed that the spores and their heat inactivated forms (microcapsules) were highly active and their enzymatic contents differed from the vegetative cells. Laccase, glucose oxidase, and alkaline phosphatase activities were detected in the dormant forms, but not in the vegetative cells. Although no nanoparticle was produced by active cells of B. athrophaeus, both spores and microcapsules were efficiently capable of reducing the silver ions (Ag⁺) to elemental silver (Ag⁰) leading to the formation of nanoparticles from silver nitrate (AgNO₃). The presence of biologically synthesized silver nanoparticles was determined by obtaining broad spectra with maximum absorbance at 400 nm in UV-visible spectroscopy. The X-ray diffraction analysis pattern revealed that the nanoscale particles have crystalline nature with various topologies, as confirmed by transmission electron microscopy (TEM). The TEM micrograph showed the nanocrystal structures with dimensions ranging from 5 to 30 nm. Accordingly, the spore mixture could be employed as a factory for detoxification of heavy metals and subsequent production of nanoparticles. This research introduces an environmental friendly and cost effective biotechnological process for the extracellular synthesis of silver nanoparticles using the bacterial spores.

Human Behavior and Environmental Sustainability: promoting a pro-environmental behavior by harnessing the social, psychological and physical influences of the built environment

Science.gov (United States)

Abusafieh, Shaden; Razem, Maiss

2017-11-01

Recently, technological advancements in the sustainable design field have allowed us to reduce the ecological impact of the built environment, to reduce consumption of non-renewable resources, to create healthy environments and in some cases may even rehabilitate the ecosystem. Nevertheless, several studies have been carried out showing that sustainable technology does not automatically lead to environmentally friendly behaviors in its users. Various environmental problems threaten environmental sustainability and many of these problems are rooted in human behavior. Unfortunately, there is a lack in studies which take into consideration the human behavior influences within a sustainable built environment. We believe that the built environment should be used to support human goals and requirements, but at the same time we should consider it as a context in which human values and behaviors are cultivated. This research aimed to help in promoting environmental sustainability by using architectural design in changing relevant human behavior toward an environmentally friendly behavior. In order to achieve this, the research adopted Environment-centered Approach to gain more acute perspective into the relationship between the physical environment and human behavior, focusing on social, psychological and physical influences of the built environment. It appears that environmental psychology's merits have high potential in changing behavior within the built environment. The research provides a systematic approach for selecting, assessing, evaluating the behaviors to be changed and the factors that determine them. Furthermore, this approach helps in choosing the best interventions that could be applied in built environment to encourage such a sustainable behavior. This study tried to construct an agenda for further researches to find particular architectural design elements and strategies that we can harness to develop a pro-environment human behavior.

Environmentally friendly power sources for aerospace applications

Science.gov (United States)

Lapeña-Rey, Nieves; Mosquera, Jonay; Bataller, Elena; Ortí, Fortunato; Dudfield, Christopher; Orsillo, Alessandro

One of the crucial challenges of the aviation industry in upcoming years is to reduce emissions not only in the vicinity of airfields but also in cruise. Amongst other transport methods, airplanes emissions count for 3% of the CO 2 emissions. Initiatives to reduce this include not only investing in more fuel-efficient aircrafts or adapting existing ones to make them more efficient (e.g. by fitting fuel-saving winglets), but also more actively researching novel propulsion systems that incorporate environmentally friendly technologies. The Boeing Company through its European subsidiary, Boeing Research and Technology Europe (BR&TE) in collaboration with industry partners throughout Europe is working towards this goal by studying the possible application of advanced batteries and fuel-cell systems in aeronautical applications. One example is the development of a small manned two-seater prototype airplane powered only by proton exchange membrane (PEM) fuel-cell stacks, which runs on compressed hydrogen gas as fuel and pressurized air as oxidant, and Li-ion batteries. The efficient all composite motorglider is an all electric prototype airplane which does not produce any of the noxious engine exhaust by-products, such as carbon dioxide, carbon monoxide or NO x, that can contribute to climate change and adversely affect local air quality. Water and heat are the only exhaust products. The main objective is to demonstrate for the first time in aviation history a straight level manned flight with fuel-cells as the only power source. For this purpose, the original engine of a super Dimona HK36TTC glider from Diamond Aircraft Industries (Austria) was replaced by a hybrid power system, which feeds a brushless dc electrical motor that rotates a variable pitch propeller. Amongst the many technical challenges encountered when developing this test platform are maintaining the weight and balance of the aircraft, designing the thermal management system and the power management

Environmentally friendly power sources for aerospace applications

Energy Technology Data Exchange (ETDEWEB)

Lapena-Rey, Nieves; Mosquera, Jonay; Bataller, Elena; Orti, Fortunato [Boeing Research and Technology Europe Ltd., Environmental Technologies, C/ Canada Real de las Merinas 1-3, Building 4, 4th floor, Madrid 28042 (Spain); Dudfield, Christopher; Orsillo, Alessandro [Intelligent Energy Ltd., The Innovation Centre, Epinal Way, Loughborough LE11 3EH (United Kingdom)

2008-07-01

One of the crucial challenges of the aviation industry in upcoming years is to reduce emissions not only in the vicinity of airfields but also in cruise. Amongst other transport methods, airplanes emissions count for 3% of the CO{sub 2} emissions. Initiatives to reduce this include not only investing in more fuel-efficient aircrafts or adapting existing ones to make them more efficient (e.g. by fitting fuel-saving winglets), but also more actively researching novel propulsion systems that incorporate environmentally friendly technologies. The Boeing Company through its European subsidiary, Boeing Research and Technology Europe (BR and TE) in collaboration with industry partners throughout Europe is working towards this goal by studying the possible application of advanced batteries and fuel-cell systems in aeronautical applications. One example is the development of a small manned two-seater prototype airplane powered only by proton exchange membrane (PEM) fuel-cell stacks, which runs on compressed hydrogen gas as fuel and pressurized air as oxidant, and Li-ion batteries. The efficient all composite motorglider is an all electric prototype airplane which does not produce any of the noxious engine exhaust by-products, such as carbon dioxide, carbon monoxide or NOx, that can contribute to climate change and adversely affect local air quality. Water and heat are the only exhaust products. The main objective is to demonstrate for the first time in aviation history a straight level manned flight with fuel-cells as the only power source. For this purpose, the original engine of a super Dimona HK36TTC glider from Diamond Aircraft Industries (Austria) was replaced by a hybrid power system, which feeds a brushless dc electrical motor that rotates a variable pitch propeller. Amongst the many technical challenges encountered when developing this test platform are maintaining the weight and balance of the aircraft, designing the thermal management system and the power

Report on the fiscal 1993 investigational study of the environmental technology development trend in Japan. Trend survey of the introduction policy of environmentally friendly products; 1993 nendo Nippon ni okeru kankyo gijutsu kaihatsu doko nado ni kansuru chosa kenkyu hokokusho. Kankyo chowagata seihin no donyu hosaku nado doko chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-05-01

An investigation was conducted into the systematical scheme for the introduction and promotion of environmentally friendly products mostly to the U.S., Europe and China. In the U.S., the introduction policy is given to one and all fields of the industry. The introduction policy of the U.S. has a characteristic that the introduction is left to the market principle by DSM or permit dealing, etc. except the preferential tax system and systematical finance in which the government is concerned. The policy of European countries is characterized by the idea preceding, standards or rules are first given, and the whole is pushed on to them. Accordingly, it seems that there is few atmosphere of expecting to receive the government side economic incentives from the corporate side. Legal regulations on the environment in China were prepared in a comparatively early time (1979), but the supervision of obeying the regulations and the appearance/spread of environmentally friendly product menus have just started. Accordingly, as the introduction policy on environmentally friendly products, there was found nothing valuable but the regulations. 12 refs., 3 figs., 15 tabs.

Transforming psychotherapy in order to succeed with adolescent boys: male-friendly practices.

Science.gov (United States)

Kiselica, Mark S

2003-11-01

The purpose of this article is to describe a "male-friendly" therapeutic process with troubled adolescent boys. A male-friendly process is one in which the therapist employs a wide variety of strategies and activities that are likely to appeal to male youth and that facilitate the establishment and maintenance of rapport. The nuances of practicing a male-friendly approach are highlighted and then applied in a case study of psychotherapy with a depressed adolescent boy. The implications of this approach for redefining professional conceptions about boundaries in the client-therapist relationship and reexamining inaccurate stereotypes about the emotional lives of boys are discussed. Copyright 2003 Wiley Periodicals, Inc.

Novel application of bacteriophage for controlling foaming in wastewater treatment plant- an eco-friendly approach

Science.gov (United States)

Khairnar, Krishna; Chandekar, Rajshree; Nair, Aparna; Pal, Preeti; Paunikar, Waman N.

2016-01-01

ABSTRACT This addendum to “Novel application of bacteriophage for controlling foaming in wastewater treatment plant- an eco-friendly approach “ includes characteristics of the phages NOC1, NOC2 and NOC3 not discussed in the previous paper. The phage adsorption and host interaction properties, their sensitivity to pH and temperature are inferred. NOC2 is seen to be more temperature resistant while others are not. All the phages show pH sensitivity. There is a variance observed in the behavior of these phages. Also, applicability of the phage based system to large scale reactors is studied and discussed here. PMID:26890996

Feasibility survey of the environmentally-friendly coal utilization system. Feasibility survey of the environmentally-friendly coal utilization system in Indonesia; Kankyo chowagata sekitan riyo system kanosei chosa. Indonesia ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-03-01

With relation to the coal of Indonesia, where the expansion of the use of coal as a substitute for petroleum/plant fuel is aimed at, the paper grasped the situation of coal production/distribution/utilization and environmental problems, and analyzed the situation of the coal utilization/spread by industry including the commercial/residential use. The purpose of the survey is to work out a comprehensive master plan including Japan`s international cooperation for introducing the environmentally-friendly coal utilization system to Indonesia. Coal utilization systems, the introduction of which Indonesia should study in future, were picked up, according to the surveys in fiscal 1993 and 1994. In commercial/residential and small-scale industry sectors, needed is improvement of carbonization technology for production of coal carbonization briquette. Moreover, the introduction of bio-briquette should be studied in the future. In the power generation sector, studies should be made on the introduction of technology for SOx/NOx reduction and technology for coal ash treatment including the effective use of coal ash. For the introduction of coal boilers, the combustion mixed with bagasse, which is abundant in amount, is also necessary. In the coal production sector, coal preparation technology is studied, and a method to select the optimum process was proposed through the simulation. 76 figs., 43 tabs.

Strengthening Youth Friendly Health Services through Expanding ...

African Journals Online (AJOL)

USER

safety, LARC uptake among youth is low. We evaluated the effect on contraceptive uptake of training youth-friendly service providers to counsel and provide all .... approach - service delivery limited to LARCs training for the YFS providers and ...

It is a moral issue : The relationship between environmental self-identity, obligation-based intrinsic motivation and pro-environmental behaviour

NARCIS (Netherlands)

van der Werff, Ellen; Steg, Linda; Keizer, Kees

2013-01-01

In order to effectively mitigate climate change, people need to adopt environmentally-friendly actions. We argue that some people act in an environmentally-friendly manner without external incentives to do so, but rather because they are intrinsically motivated to do so. There is some initial

Fiscal 1996 survey report on the environmentally friendly type coal utilization system feasibility study. Feasibility study of the environmentally friendly type coal utilization system in Malaysia and Vietnam; Kankyo chowagata sekitan riyo system kanosei chosa. Malaysia Vietnam ni okeru kankyo chowagata sekitan riyo system kanosei chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This survey arranged the status of coal utilization technology and the status of coal production, supply, etc. in Malaysia and Vietnam, examined/studied coal utilization systems in both countries, and finally assessed feasibility of introducing the environmentally friendly type coal utilization system. As a country of primary energy source which is abundant in crude oil, natural gas, hydroelectric power, coal, etc., Malaysia now depends on crude oil and natural gas for 80% of its energy, and places emphasis on exploration of natural gas and oil refining. In electric power and cement industries where coal is consumed, effectiveness and environmental issues in association with coal utilization are future subjects. In Vietnam, the north is abundant in hydroelectric power and anthracite, and the south in oil and gas resource, but the north and central districts are in a state of undevelopment. Coal is used for coal thermal power generation, cement industry, and residential/commercial fuel. In the future, effective coal utilization and environmental issues will be subjects. 16 refs., 38 figs., 75 tabs.

Remediation of lead and cadmium from simulated groundwater in loess region in northwestern China using permeable reactive barrier filled with environmentally friendly mixed adsorbents.

Science.gov (United States)

Fan, Chunhui; Gao, Yalin; Zhang, Yingchao; Dong, Wanqing; Lai, Miao

2018-01-01

Permeable reactive barrier (PRB) is potentially effective for groundwater remediation, especially using environmentally friendly mixed fillers in representative areas, such as semi-arid loess region in northwestern China. The mixed materials, including corn straw (agricultural wastes), fly ash (industrial wastes), zeolite synthesized from fly ash (reutilized products), and iron-manganese nodule derived from loess (materials with regional characteristics) in northwestern China, were chosen as PRB media to reduce the contents of lead and cadmium in simulated groundwater. A series of lab-scale column experiments were investigated, and the response surface methodology (RSM) was used to optimize the working process; Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM) were applied to further reveal the reaction mechanism. It shows that the purification efficiencies are more acceptable when the concentrations of lead and cadmium are approximately 7 and 0.7 mg/L, respectively, at 25 °C in weakly acidic solution, and functional groups of -OH and C=C play an important role for contaminants removal. The mixed adsorbents used are effective to remove lead and cadmium in groundwater. This is the first report on the removal of lead and cadmium from groundwater in loess region in northwestern China using PRB filled with environmentally friendly mixed adsorbents.

Phil Friend julgustab riske võtma / Phil Friend ; interv. Harda Roosna

Index Scriptorium Estoniae

Friend, Phil

2003-01-01

Suurbritannia koolitus- ja konsultatsioonifirma Churchill & Friend juhataja Phil Friend vastab küsimustele oma firma missiooni kohta Hiiumaal, puuetega inimeste elu erinevuste kohta Hiiumaal ja Suurbritannias. Vt. samas: Phil Friend julgustas tööandjaid puuetega inimesi tööle võtma

College Student Environmental Activism: How Experiences and Identities Influence Environmental Activism Approaches

Science.gov (United States)

King, Laura A. H.

2016-01-01

College student environmental activism is one way students civically engage in addressing social issues. This study explores the environmental activism of twelve college students and how their experiences outside of college and in college influenced their activism. In addition, how students' identities influenced their approach to activism was…

Environmentally Friendly Concept in Spatial Regulation

Directory of Open Access Journals (Sweden)

T Taryono

2004-01-01

Full Text Available Spatial order of a region include purpose of structure and interrelatedness of spatial order which as a unity of development mechanism. Spatial order can’t be part from law basic that is UUD’45 and GBHN, in order to the management can be integrated and keep the environment. Spatial order also take note of physical factor and non physical factor. Physical factor consist of soil, water, flora, and fauna. Non physical factors consist of environment, social, economic, and soon. The principle of arrangement of spatial order in a region include national region, regional and local, and a region as an administrative baoundary, that is local government authority, like province, district, subdistrict, and village. The effort for spatial ordering of the environment, for example ordering resource, arrangement of allocation and location, arrangement of environmental aesthetic  and arrangement of environmental quality.

Environmentally Friendly Anticorrosion Coating for High Strength Fasteners

Science.gov (United States)

2011-01-01

electroplated coatings followed by a hexavalent chrome rinse. The environmental and health hazards associated with cadmium and hexavalent chromium are...have been used with cadmium (Cd) electroplated coatings, followed by a hexavalent chromium (Cr6+) rinse. The environmental and human health hazards...followed by a hexavalent chromium (Cr6+) rinse. The environmental and human health hazards associated with both cadmium and chromates are well

Does better for the environment mean less tasty? Offering more climate-friendly meals is good for the environment and customer satisfaction.

Science.gov (United States)

Visschers, Vivianne H M; Siegrist, Michael

2015-12-01

Food consumption comprises a significant portion of the total environmental impact of households. One way to reduce this impact may be to offer consumers more climate-friendly meal choices, such as when eating out. However, the environmental benefits of such an intervention will depend on not only consumers' liking of the climate-friendlier meals, but also on the perceived environmental impact. We therefore investigated the relationship between the global warming potential (GWP) of and consumers' liking of meals in two field studies in the same restaurant. Visitors to the restaurant were asked to rate the taste of the meal they had just consumed. These taste ratings were then related to the meals' GWP and number of purchases. In the second study, an intervention was tested consisting of a climate-friendly choice label and information posters. Contrary to expectations, it was found in both studies that the GWP of the meals was unrelated to the taste or the number of purchases. Offering more climate-friendly meals did not change consumer satisfaction. As expected, the introduction of the climate-friendly choice label increased the number of climate-friendly meal purchases. Therefore, offering more climate-friendly meals with a climate-friendly choice label can affect consumers' meal choices, but not their preferences or satisfaction, which is beneficial for the climate, consumers and gastronomic establishments. Copyright © 2015 Elsevier Ltd. All rights reserved.

Study on environmental friendly national park management plan: concentrated on the support plan for national park residents

Energy Technology Data Exchange (ETDEWEB)

Park, Yong Ha; Byun, Byoung Seol; Chung, Hoe Seong; Kim, Mi Sook; Kim, Jeong Won; Joo, Yong Joon [Korea Environment Institute, Seoul (Korea)

1999-12-01

National parks in Korea have been selected for preserving beautiful sceneries of nature or diversity of organisms. Today as the increase of population and industrialization has caused the increase of natural resource demand, it is difficult to preserve all ecosystems equally. Therefore the national park system has established to prevent the damage to an ecosystem or to preserve a region that can be damaged by selecting a valuable area. The objective of this study is to recommend an efficient support plan for national park residents, to induce their activities to be environmental friendly and to preserve an ecosystem in a national park. To achieve this, the similar systems, laws and cases in the advanced countries have compared and reviewed and a support plan for residents appropriate for Korean situation has discussed. 41 refs., 4 figs., 33 tabs.

A Sensitivity Analysis Approach to Identify Key Environmental Performance Factors

Directory of Open Access Journals (Sweden)

Xi Yu

2014-01-01

Full Text Available Life cycle assessment (LCA is widely used in design phase to reduce the product’s environmental impacts through the whole product life cycle (PLC during the last two decades. The traditional LCA is restricted to assessing the environmental impacts of a product and the results cannot reflect the effects of changes within the life cycle. In order to improve the quality of ecodesign, it is a growing need to develop an approach which can reflect the changes between the design parameters and product’s environmental impacts. A sensitivity analysis approach based on LCA and ecodesign is proposed in this paper. The key environmental performance factors which have significant influence on the products’ environmental impacts can be identified by analyzing the relationship between environmental impacts and the design parameters. Users without much environmental knowledge can use this approach to determine which design parameter should be first considered when (redesigning a product. A printed circuit board (PCB case study is conducted; eight design parameters are chosen to be analyzed by our approach. The result shows that the carbon dioxide emission during the PCB manufacture is highly sensitive to the area of PCB panel.

A service and value based approach to estimating environmental flows

DEFF Research Database (Denmark)

Korsgaard, Louise; Jensen, R.A.; Jønch-Clausen, Torkil

2008-01-01

at filling that gap by presenting a new environmental flows assessment approach that explicitly links environmental flows to (socio)-economic values by focusing on ecosystem services. This Service Provision Index (SPI) approach is a novel contribution to the existing field of environmental flows assessment...... of sustaining ecosystems but also a matter of supporting humankind/livelihoods. One reason for the marginalisation of environmental flows is the lack of operational methods to demonstrate the inherently multi-disciplinary link between environmental flows, ecosystem services and economic value. This paper aims...

Liquid Salt as Green Solvent: A Novel Eco-Friendly Technique to Enhance Solubility and Stability of Poorly Soluble Drugs

Science.gov (United States)

Patel, Anant A.

As a result of tremendous efforts in past few decades, various techniques have been developed in order to resolve solubility issues associated with class II and IV drugs, However, majority of these techniques offer benefits associated with certain drawbacks; majorly including low drug loading, physical instability on storage and excessive use of environmentally challenging organic solvents. Hence, current effort was to develop an eco-friendly technique using liquid salt as green solvent, which can offer improvement in dissolution while maintaining long term stability. The liquid salt formulations (LSF) of poorly soluble model drugs ibuprofen, gemfibrozil and indomethacin were developed using 1-Ethyl-3-methylimidazolium ethyl sulfate (EMIM ES) as a non-toxic and environmentally friendly alternate to organic solvents. Liquid medications containing clear solutions of drug, EMIM ES and polysorbate 20, were adsorbed onto porous carrier Neusilin US2 to form free flowing powder. The LSF demonstrated greater rate and extent of dissolution compared to crystalline drugs. The dissolution data revealed that more than 80% drug release from LSF within 20 mins compared to less than 18% release from pure drugs. As high as 70% w/w liquid loading was achieved while maintaining good flowability and compressibility. In addition, the LSF samples exposed to high temperature and high humidity i.e. 40°C/80% RH for 8 weeks, demonstrated excellent physical stability without any signs of precipitation or crystallization. As most desirable form of administration is tablet, the developed liquid salt formulations were transformed into tablets using design of experiment approach by Design Expert Software. The tablet formulation composition and critical parameter were optimized using Box-Behnken Design. This innovative liquid salt formulation technique offered improvement in dissolution rate and extent as well as contributed to excellent physical stability on storage. Moreover, this formulation

Development of advanced treatment technologies of radio-aqueous waste by an environmental friendly decomposition

Energy Technology Data Exchange (ETDEWEB)

Kim, Kwang Wook; Lee, E. H.; Moon, J. K. and others

2006-01-15

This project was aimed at the technology developments of electrode fabrication, electrolytic reactor design and fabrication, electrolytic processes and the analyses of electroytic reaction mechanisms, which were essential elements for the development of electrolytic systems to decompose or teat environmentally- friendly the several salts contained in waste solutions which are to be generated in the fields of nuclear/non-nuclear industries. Major research items carried our in this project were as follows; - Development of technologies to choose and fabricate the anodes and cathodes for the treatments of waste solutions containing nitrogen compounds and organics. - Development of a membrane electrolyzer stacked by mono-polar unit cells with independent series flow path of electrolytes - Development of an electrolyzer with a self-pH adjustment and an electrolytic process for ammonia decomposition by using the electrolyzer - Analysis of electrolytic reaction mechanism of ammonia - Development of an ion exchange membrane electrolyzer with only one discharge of pH-controlled electrolyte solution - Development of electrolytic dechlorination technology for the treatment of chloride molten salt waste salt from pyroprocess. - Development of technologies for treatment of high concentration nitric acid and recovery of waste organic solvent.

Waste management strategy for cost effective and environmentally friendly NPP decommissioning

Energy Technology Data Exchange (ETDEWEB)

Per Lidar; Arne Larsson [Studsvik Nuclear AB (ndcon partner), Nykoping (Sweden); Niklas Bergh; Gunnar Hedin [Westinghouse Electric Sweden AB (ndcon partner), Vasteraas (Sweden)

2013-07-01

-necks in the process causes increased space requirements and will have negative impact on the project schedule, which increases not only the cost but also the dose exposure to personnel. For these reasons it is critical to create a process that transfers material into conditioned waste ready for disposal as quickly as possible. To a certain extent the decommissioning program should be led by the waste management process. With the objective to reduce time for handling of dismantled material at site and to efficiently and environmental-friendly use waste management methods (clearance for re-use followed by clearance for recycling), the costs for the plant decommissioning could be reduced as well as time needed for performing the decommissioning project. Also, risks for delays would be reduced with a well-defined handling scheme which limits surprises. Delays are a major cost driver for decommissioning projects. (authors)

Waste management strategy for cost effective and environmentally friendly NPP decommissioning

International Nuclear Information System (INIS)

Per Lidar; Arne Larsson; Niklas Bergh; Gunnar Hedin

2013-01-01

-necks in the process causes increased space requirements and will have negative impact on the project schedule, which increases not only the cost but also the dose exposure to personnel. For these reasons it is critical to create a process that transfers material into conditioned waste ready for disposal as quickly as possible. To a certain extent the decommissioning program should be led by the waste management process. With the objective to reduce time for handling of dismantled material at site and to efficiently and environmental-friendly use waste management methods (clearance for re-use followed by clearance for recycling), the costs for the plant decommissioning could be reduced as well as time needed for performing the decommissioning project. Also, risks for delays would be reduced with a well-defined handling scheme which limits surprises. Delays are a major cost driver for decommissioning projects. (authors)

An environmental friendly electrode and extended cathodic potential window for anodic stripping voltammetry of zinc detection

International Nuclear Information System (INIS)

Dueraning, Anisah; Kanatharana, Proespichaya; Thavarungkul, Panote; Limbut, Warakorn

2016-01-01

This work reports on a novel polyeriochrome black T (poly(EBT) modified electrode for use as an environmentally-friendly electrode material that extends the cathodic potential window and improves the sensitivity and repeatability to detect zinc in industrial wastewater. The poly(EBT) film on the GCE surface was fabricated by electropolymerization. The surface morphology and electrochemical behavior of the modified electrode were characterized by scanning electron microscopy, fourier transform infrared spectroscopy and anodic stripping voltammetry. Under optimal conditions, the poly(EBT)/GCE exhibited a high hydrogen overvoltage (extended cathodic potential window). It provided a high sensitivity, a wide linear range (1.0 to 400.0 μg L −1 ), a low detection limit (0.9 μg L −1 ), had excellent repeatability and good recoveries (95% to 105%). This proposed modified electrode was applied to the determination of zinc in wastewater samples, and the results were consistent with those of an inductively coupled plasma atomic emission spectroscopy analysis.

Eco-friendly synthesis of metal dichalcogenides nanosheets and their environmental remediation potential driven by visible light

Science.gov (United States)

Mishra, Ashish Kumar; Lakshmi, K. V.; Huang, Liping

2015-01-01

Exfoliated transition metal dichalcogenides (TMDs) such as WS2 and MoS2 have shown exciting potential for energy storage, catalysis and optoelectronics. So far, solution based methods for scalable production of few-layer TMDs usually involve the use of organic solvents or dangerous chemicals. Here, we report an eco-friendly method for facile synthesis of few-layer WS2 and MoS2 nanosheets using dilute aqueous solution of household detergent. Short time sonication of varying amount of bulk samples in soapy water was used to scale up the production of nanosheets. Thermal stability, optical absorption and Raman spectra of as-synthesized WS2 and MoS2 nanosheets are in close agreement with those from other synthesis techniques. Efficient photocatalytic activity of TMDs nanosheets was demonstrated by decomposing Brilliant Green dye in aqueous solution under visible light irradiation. Our study shows the great potential of TMDs nanosheets for environmental remediation by degrading toxic industrial chemicals in wastewater using sunlight. PMID:26503125

THE IMPACT OF ENVIRONMENTALLY FRIENDLY POSTHARVEST TREATMENTS ON THE ANTIOXIDANT ACTIVITY OF STRAWBERRY FRUITS DURING STORAGE

Directory of Open Access Journals (Sweden)

Ivna Štolfa

2014-12-01

Full Text Available Proper postharvest storage is an effective way to maintain the quality and nutritional values of fruits. The aim of this study was to determine how environmentally friendly postharvest treatments with salicylic acid solution, colloidal silver solution and ozone, affect the antioxidant activity of strawberry fruits (Fragaria x ananassa Duch. cv. Albion during 7 days of storage at 4°C. The content of ascorbic acid, total phenols and antioxidant activity of strawberry fruits were determined spec-trophotometrically. After 7 days of storage in strawberry fruits treated with all three treatments separately, the contents of ascorbic acid were higher than in the control fruits, supporting the usefulness of these treatments for preserving fruit quality and nutritional value during storage. The treatment with salicylic acid solution showed the most beneficial effect during storage causing a significant increase in the content of ascorbic acid, phenols and antioxidant activity at the end of the storage period.

Eco-friendly synthesis of metal dichalcogenides nanosheets and their environmental remediation potential driven by visible light

Science.gov (United States)

Mishra, Ashish Kumar; Lakshmi, K. V.; Huang, Liping

2015-10-01

Exfoliated transition metal dichalcogenides (TMDs) such as WS2 and MoS2 have shown exciting potential for energy storage, catalysis and optoelectronics. So far, solution based methods for scalable production of few-layer TMDs usually involve the use of organic solvents or dangerous chemicals. Here, we report an eco-friendly method for facile synthesis of few-layer WS2 and MoS2 nanosheets using dilute aqueous solution of household detergent. Short time sonication of varying amount of bulk samples in soapy water was used to scale up the production of nanosheets. Thermal stability, optical absorption and Raman spectra of as-synthesized WS2 and MoS2 nanosheets are in close agreement with those from other synthesis techniques. Efficient photocatalytic activity of TMDs nanosheets was demonstrated by decomposing Brilliant Green dye in aqueous solution under visible light irradiation. Our study shows the great potential of TMDs nanosheets for environmental remediation by degrading toxic industrial chemicals in wastewater using sunlight.

How youth-friendly are pharmacies in New Zealand? Surveying aspects of accessibility and the pharmacy environment using a youth participatory approach.

Science.gov (United States)

Horsfield, Emma; Kelly, Fiona; Clark, Terryann; Sheridan, Janie

2014-01-01

The international youth population has significant unmet health needs, and there have been many calls to increase youth health care access. Community pharmacies may be able to help address these needs, but very little research has investigated this area and it is not known whether the current community pharmacy setting is acceptable or appropriate for youth. 1) To obtain information on physical factors which could affect young people's use of community pharmacies in New Zealand, including accessibility, opening times and the physical youth-friendliness of the pharmacy environment. 2) To involve and utilize young people in the research process, in order to understand their needs and interpretation of survey data. This study applied a cross sectional survey design, informed by a sequential youth participatory approach. A questionnaire was developed in consultation with a youth advisory group (YAG). Questionnaires distributed to pharmacists at 500 randomly selected pharmacies nationwide between May and September 2011 collected information on whether the pharmacy met selected youth-friendly criteria. These included physical aspects of youth-friendliness, such as opening times and the pharmacy environment. The YAG also provided a youth perspective in the interpretation of the results. Three mail shots achieved a response rate of 50.5%. Most respondents reported the pharmacy to be accessible by public transport and many had extended opening hours. Although most pharmacies met some youth-friendly criteria with regards to the pharmacy environment (e.g. having a private consultation area), more specific criteria (such as displaying youth health information) were usually not met. Interpretive feedback from the YAG highlighted areas for improvement. Pharmacies show potential as youth-friendly health care access points and most already meet some youth-friendly criteria. Areas identified for improvement will require a greater youth focus from the profession, and should be

Comprehensive review on application of edible film on meat and meat products: An eco-friendly approach.

Science.gov (United States)

Umaraw, Pramila; Verma, Akhilesh K

2017-04-13

The functions of packaging materials are to prevent moisture loss, drip, reduce lipid oxidation, improve some of their sensorial properties (color, taste and smell) and provide microbial stability of foods. Edible films can be made from protein, polysaccharides and lipids or by combination of any of these to form a composite film. Nanocomposites are composite films made by incorporation of nanoparticles. Edible packaging and coating of the meat and meat products enhances the self-life by the incorporation of the active compound (such as antimicrobial and antioxidant compound) in to the packaging matrix. Incorporation of the some ingredients in the matrix may also improve the nutritional as well as sensory attributes of the packed products. Edible packaging material also reduces environmental pollution by overcoming the burden degradation as edible films are biodegradable and thus eco-friendly.

STARCH SULFURIC ACID: AN ALTERNATIVE, ECO-FRIENDLY CATALYST FOR BIGINELLI REACTION

Directory of Open Access Journals (Sweden)

Ramin Rezaei

2013-12-01

Full Text Available The one-pot multicomponent synthesis of 3,4-dihydropyrimidinone derivatives using starch sulfuric acid as an environmentally friendly biopolymer-based solid acid catalyst from aldehydes, β-keto esters and urea/ thiourea without solvent is described. Compared with classical Biginelli reaction conditions, this new method has the advantage of minimizing the cost operational hazards and environmental pollution, good yields, shorter reaction times and simple work-up.

The combination of reducing agents/iron as environmentally friendlier alternatives for Co-based driers in the drying of alkyd paints

NARCIS (Netherlands)

Micciche, F.; Oostveen, E.A.; Haveren, van J.; Linde, van der R.

2005-01-01

In answer to the increased demand for Co-free driers for alkyd based paints, a biomimetic approach has been used to find suitable and environmentally friendly alternatives for Co-based driers for alkyd paints. This approach was chosen due to the resemblance between the mechanisms by which alkyd

ELECTROLESS NICKEL PLATING ON ABS PLASTIC BY USING ENVIRONMENTALLY FRIENDLY CHEMICALS

OpenAIRE

Uraz, Canan

2017-01-01

In this study, electroless nickel (EN) plating onacrylonitrile butadiene styrene (ABS) engineering plastic by usingenvironmentally friendly chemicals were studied. Electroless plating is afundamental step in the metal plating on the plastic. This step makes theplastic conductive and makes it possible to a homogeneous and hard platingwithout using any hazardous and unfriendly chemical such as palladium, tin,etc. In the industry there are many distinct chemical materials both catalystsand activ...

Forty years of environmentally conscious building technology design

Directory of Open Access Journals (Sweden)

Lorenzo Matteoli

2013-05-01

Full Text Available This short essay analyzes the environmental approach throughout the history of Architectural Technology, starting from building details up to the present attention to the smart city, land maintenance and urban retrofit, seen as complex research activities, political strategies, design and entrepreneurial actions which have the scope to transform present day urban crusts into organic textures, climatologically consistent, reactive, user-friendly, efficient and with a low environmental impact. The exercise identifies some research and teaching trends for Architectural Technology in order to promote debate and the analysis of the historical perspective and present situation of the discipline.

Developing age-friendly cities: case studies from Brussels and Manchester and implications for policy and practice.

Science.gov (United States)

Buffel, Tine; McGarry, Paul; Phillipson, Chris; De Donder, Liesbeth; Dury, Sarah; De Witte, Nico; Smetcoren, An-Sofie; Verté, Dominique

2014-01-01

Developing environments responsive to the aspirations of older people has become a major concern for social and public policy. Policies and programs directed at achieving "age-friendly" communities are considered to require a wide range of interventions, including actions at the level of the social and physical environment. This article compares the age-friendly approaches of two European cities, Brussels and Manchester, with a particular focus on policies and initiatives that promote active aging in an urban context. The article examines, first, the demographic, social, and multicultural contexts of Brussels and Manchester; second, the way in which both cities became members of the World Health Organization Global Network of Age-Friendly Cities and Communities; third, similarities and differences in the age-friendly approaches and actions adopted by both cities; and fourth, opportunities and barriers to the implementation of age-friendly policies. The article concludes by discussing the key elements and resources needed to develop age-friendly cities.

Environmentally friendly cellulose-based polyelectrolytes in wastewater treatment.

Science.gov (United States)

Grenda, Kinga; Arnold, Julien; Gamelas, José A F; Rasteiro, Maria G

2017-09-01

Natural-based polyelectrolytes (PELs), with all the advantages coming from being produced from renewable and biodegradable sources, are a potential solution for the removal of dyes from wastewater. In this work, surplus Eucalyptus bleached cellulose fibres from a paper mill were modified to increase the charge and solubility of cellulose. First, reactive aldehyde groups were introduced in the cellulose backbone by periodate oxidation of cellulose. Further modification with alkylammonium produced positively charged cellulose-based PELs. The final products were characterized by several analytical techniques. The PEL with the highest substitution degree of cationic groups was evaluated for its performance in decolouration processes, bentonite being used as aid. This was found to be effective for colour removal of either anionic or cationic dyes. Bio-PELs can thus be considered as very favourable eco-friendly flocculation agents for decolouration of harsh effluents from several industries, considering their biodegradable nature and thus the ability to produce less sludge.

Young friendship in HFASD and typical development: friend versus non-friend comparisons.

Science.gov (United States)

Bauminger-Zviely, Nirit; Agam-Ben-Artzi, Galit

2014-07-01

This study conducted comparative assessment of friendship in preschoolers with high-functioning autism spectrum disorder (HFASD, n = 29) versus preschoolers with typical development (n = 30), focusing on interactions with friends versus acquaintances. Groups were matched on SES, verbal/nonverbal MA, IQ, and CA. Multidimensional assessments included: mothers' and teachers' reports about friends' and friendship characteristics and observed individual and dyadic behaviors throughout interactions with friends versus non-friends during construction, drawing, and free-play situations. Findings revealed group differences in peer interaction favoring the typical development group, thus supporting the neuropsychological profile of HFASD. However, both groups' interactions with friends surpassed interactions with acquaintances on several key socio-communicative and intersubjective capabilities, thus suggesting that friendship may contribute to enhancement and practice of social interaction in HFASD.

Economic approach of the environment and environmental conservation

International Nuclear Information System (INIS)

Verbruggen, A.

2008-01-01

This book takes the non-economist by the hand in a step-by-step economic approach of environmental issues and how to handle them. Two chapters provide an introduction to the concepts of the economy, chapter six in decision theory. In the first chapter, the economist discovers a broader vision by testing the economic approach to insights from other disciplines. Chapter 4 explains how economic reasoning can contribute tot environmental protection in practice. The consideration of the costs and benefits of environmental protection indicates objectives that must be pursued for the community. The conflict between private and public interest forces policy makers to get and maintain the numerous polluters focused on environmental protection. Suitable instruments are discussed in chapter five, including criteria for choice and an in-depth study of the economic instruments levies and tradable emission permits. The EU Emission trading Scheme is used as reference. [mk] [nl

A Lithium-Ion Battery with Enhanced Safety Prepared using an Environmentally Friendly Process.

Science.gov (United States)

Mueller, Franziska; Loeffler, Nicholas; Kim, Guk-Tae; Diemant, Thomas; Behm, R Jürgen; Passerini, Stefano

2016-06-08

A new lithium-ion battery chemistry is presented based on a conversion-alloying anode material, a carbon-coated Fe-doped ZnO (TMO-C), and a LiNi1/3 Mn1/3 Co1/3 O2 (NMC) cathode. Both electrodes were fabricated using an environmentally friendly cellulose-based binding agent. The performance of the new lithium-ion battery was evaluated with a conventional, carbonate-based electrolyte (ethylene carbonate:diethyl carbonate-1 m lithium hexafluorophosphate, EC:DEC 1 m LiPF6 ) and an ionic liquid (IL)-based electrolyte (N-butyl-N-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide-0.2 m lithium bis(trifluoromethanesulfonyl)imide, Pyr14 TFSI 0.2 m LiTFSI), respectively. Galvanostatic charge/discharge tests revealed a reduced rate capability of the TMO-C/Pyr14 TFSI 0.2 m LiTFSI/NMC full-cell compared to the organic electrolyte, but the coulombic efficiency was significantly enhanced. Moreover, the IL-based electrolyte substantially improves the safety of the system due to a higher thermal stability of the formed anodic solid electrolyte interphase and the IL electrolyte itself. While the carbonate-based electrolyte shows sudden degradation reactions, the IL exhibits a slowly increasing heat flow, which does not constitute a serious safety risk. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

ENVIRONMENTAL SAFETY OF LIVESTOCK PRODUCTS IN THE ECONOMIC AND GEOGRAPHIC AREAS OF THE AZERBAIJAN PART OF THE GREATER CAUCASUS

Directory of Open Access Journals (Sweden)

F. M. Jafarova

2016-01-01

Full Text Available Aim. The aim is to study the political, economic and environmental aspects of food security, which is an important component of national security; to study the issues of the use of environmentally friendly agricultural products, as well as the environmental safety of livestock products.Methods. Determination of the dynamics of livestock production on the basis of the comparative statistical analysis, the study of animal breeding territorial organization through a systematic approach.Results. The region has favorable conditions for the production of ecologically clean agricultural products, using environmentally friendly feed. We should develop manufacturing industries to meet international standards and provide the population with healthy food.Conclusion. We revealed the ecological safety of livestock products in the economic and geographic regions of the Azerbaijan part of the Greater Caucasus.

Environment-friendly, flame retardant thermoplastic elastomer-magnesium hydroxide composites

Science.gov (United States)

Tang, Hao; Chen, Kunfeng; Li, Xiaonan; Ao, Man; Guo, Xinwen; Xue, Dongfeng

Halogen-free and environment-friendly magnesium hydroxide (Mg(OH)2) was synthesized to enhance the flame retardant properties of thermoplastic elastomer (TPE). When the Mg(OH)2 content was optimized to 35wt.%, the TPE-Mg(OH)2 composites exhibited the best flame retardant properties. The results showed that there was a delay of ignition time of the samples containing Mg(OH)2; compared with the samples without Mg(OH)2, the heat release rate and total heat release decrease by 31.4% and 35.6%, while total smoke production and mass loss rate reduce by 56% and 34.2%, respectively. This work opens a door to manufacture fire-resistant polymer-based composites with environmental-friendly flame retardant additives by controllable crystallization and chemical strategies.

Technology Application of Environmental Friendly Refrigeration (Green Refrigeration) on Cold Storage for Fishery Industry

Science.gov (United States)

Rasta, IM; Susila, IDM; Subagia, IWA

2018-01-01

The application of refrigeration technology to postharvest fishery products is an very important. Moreover, Indonesia is a tropical region with relatively high temperatures. Fish storage age can be prolonged with a decrease in temperature. Frozen fish can even be stored for several months. Fish freezing means preparing fish for storage in low-temperature cold storage. The working fluid used in cold storage to cool low-temperature chambers and throw heat into high-temperature environments is refrigerant. So far refrigerant used in cold storage is Hydrochloroflourocarbons (HCFC) that is R-22. Chlor is a gas that causes ODP (Ozone Depleting Potential), while Flour is a gas that causes GWP (Global Warming Potential). Government policy began in 2015 to implement Hydrochloroflourocarbons Phase-Out Management Plan. Hydrocarbon (HC) is an alternative substitute for R-22. HC-22 (propane ≥ 99.5%) has several advantages, among others: environmentally friendly, indicated by a zero ODP value, and GWP = 3 (negligible), thermophysical property and good heat transfer characteristics, vapor phase density Which is low, and good solubility with mineral lubricants. The use of HC-22 in cold storage is less than R-22. From the analysis results obtained, cold storage system using HC-22 has better performance and energy consumption is more efficient than the R-22.

Analytical strategic environmental assessment (ANSEA) developing a new approach to SEA

International Nuclear Information System (INIS)

Dalkmann, Holger; Herrera, Rodrigo Jiliberto; Bongardt, Daniel

2004-01-01

The objective of analytical strategic environmental assessment (ANSEA) is to provide a decision-centred approach to the SEA process. The ANSEA project evolved from the realisation that, in many cases, SEA, as currently practised, is not able to ensure an appropriate integration of environmental values. The focus of SEA is on predicting impacts, but the tool takes no account of the decision-making processes it is trying to influence. At strategic decision-making levels, in turn, it is often difficult to predict impacts with the necessary exactitude. The decision-making sciences could teach some valuable lessons here. Instead of focusing on the quantitative prediction of environmental consequences, the ANSEA approach concentrates on the integration of environmental objectives into decision-making processes. Thus, the ANSEA approach provides a framework for analysing and assessing the decision-making processes of policies, plans and programmes (PPP). To enhance environmental integration into the decision-making process, decision windows (DW) can be identified. The approach is designed to be objective and transparent to ensure that environmental considerations are taken into account, or--from an ex-post perspective--to allow an evaluation of how far environmental considerations have been integrated into the decision-making process under assessment. The paper describes the concepts and the framework of the ANSEA approach and discusses its relation to SEA and the EC Directive

Effects of benzotriazole on anodized film formed on AZ31B magnesium alloy in environmental-friendly electrolyte

International Nuclear Information System (INIS)

Guo Xinghua; An Maozhong; Yang Peixia; Li Haixian; Su Caina

2009-01-01

An environmental-friendly electrolyte of silicate and borate, which contained an addition agent of 1H-benzotriazole (BTA) with low toxicity (LD50 of 965 mg/kg), was used to prepare an anodized film on AZ31B magnesium alloy under the constant current density of 1.5 A/dm 2 at room temperature. Effects of BTA on the properties of the anodized film were studied by scanning electron microscopy (SEM), energy dispersion spectrometry (EDS), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), loss weight measurement, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS), respectively. The results demonstrated that anodized growth process, surface morphology, thickness, phase structure and corrosion resistance of the anodized film were strongly dependant on the BTA concentration, which might be attributed to the formation of an BTA adsorption layer on magnesium substrate surface. When the BTA concentration was 5 g/L in the electrolyte, a compact and thick anodized film could provide excellent corrosion resistance for AZ31B magnesium alloy.

The determinants of household energy demand in rural Beijing: Can environmentally friendly technologies be effective?

International Nuclear Information System (INIS)

Zhang Jingchao; Kotani, Koji

2012-01-01

use transition. ► Renewable technologies accelerate the transition, and improve energy efficiency. ► Renewable technologies contribute to more environmental-friendly energy consumption.

Hydration characteristics and environmental friendly performance of a cementitious material composed of calcium silicate slag

Energy Technology Data Exchange (ETDEWEB)

Zhang, Na; Li, Hongxu [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Beijing Key Laboratory of Rare and Precious Metals Green Recycling and Extraction, University of Science and Technology Beijing, Beijing 100083 (China); Zhao, Yazhao [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Liu, Xiaoming, E-mail: liuxm@ustb.edu.cn [School of Metallurgical and Ecological Engineering, University of Science and Technology Beijing, Beijing 100083 (China); Beijing Key Laboratory of Rare and Precious Metals Green Recycling and Extraction, University of Science and Technology Beijing, Beijing 100083 (China)

2016-04-05

Highlights: • Cementitious material was designed according to [SiO{sub 4}] polymerization degree of raw materials. • The cementitious material composed of calcium silicate slag yields excellent physical and mechanical properties. • Amorphous C–A–S–H gel and rod-like ettringite are predominantly responsible for the strength development. • Leaching toxicity and radioactivity tests show the cementitious material is environmentally acceptable. - Abstract: Calcium silicate slag is an alkali leaching waste generated during the process of extracting Al{sub 2}O{sub 3} from high-alumina fly ash. In this research, a cementitious material composed of calcium silicate slag was developed, and its mechanical and physical properties, hydration characteristics and environmental friendly performance were investigated. The results show that an optimal design for the cementitious material composed of calcium silicate slag was determined by the specimen CFSC7 containing 30% calcium silicate slag, 5% high-alumina fly ash, 24% blast furnace slag, 35% clinker and 6% FGD gypsum. This blended system yields excellent physical and mechanical properties, confirming the usefulness of CFSC7. The hydration products of CFSC7 are mostly amorphous C–A–S–H gel, rod-like ettringite and hexagonal-sheet Ca(OH){sub 2} with small amount of zeolite-like minerals such as CaAl{sub 2}Si{sub 2}O{sub 8}·4H{sub 2}O and Na{sub 2}Al{sub 2}Si{sub 2}O{sub 8}·H{sub 2}O. As the predominant hydration products, rod-like ettringite and amorphous C–A–S–H gel play a positive role in promoting densification of the paste structure, resulting in strength development of CFSC7 in the early hydration process. The leaching toxicity and radioactivity tests results indicate that the developed cementitious material composed of calcium silicate slag is environmentally acceptable. This study points out a promising direction for the proper utilization of calcium silicate slag in large quantities.

An innovative approach to multimedia waste reduction: Measuring performance for environmental cleanup projects

International Nuclear Information System (INIS)

Phifer, B.E. Jr.; George, S.M.

1993-04-01

One of the greatest challenges we now face in environmental cleanup is measuring the progress of minimizing multimedia transfer releases and achieving waste reduction. Briefly, multimedia transfer refers to the air, land, and water where pollution is not controlled, concentrated, and moved from one medium to another. An example of multimedia transfer would be heavy metals in wastewater sludges moved from water to land disposal. Over $2 billion has been budgeted for environmental restoration site cleanups by the Department of Energy (DOE) for FY 1994. Unless we reduce the huge waste volumes projected to be generated in the near future, then we will devote more and more resources to the management and disposal of these wastes. To meet this challenge, the Martin Marietta Energy Systems, Inc., Oak Ridge Environmental Restoration (ER) Program has explored the value of a multimedia approach by designing an innovative Pollution Prevention Life-Cycle Model. The model consists of several fundamental elements (Fig. 1) and addresses the two major objectives of data gathering and establishing performance measures. Because the majority of projects are in the remedial investigation phase, the focus is on the prevention of unnecessary generation of investigation-derived waste and multimedia transfers at the source. A state-of-the-art tool developed to support the life-cycle model for meeting these objectives is the Numerical Scoring System (NSS), which is a computerized, user-friendly data base system for information management, designed to measure the effectiveness of pollution prevention activities in each phase of the ER Program. This report contains a discussion of the development of the Pollution Prevention Life-Cycle Model and the role the NSS will play in the pollution prevention programs in the remedial investigation phase of the ER Program at facilities managed by Energy Systems for DOE

Eco-friendly synthesis of 4-4-diaminodiphenylurea, a dye intermediate and direct dyes derived from it

International Nuclear Information System (INIS)

Amjad, R.; Khan, S.R.; Naeem, M.; Sohaib, M.; Munawar, M.A.

2011-01-01

A rapid, environmental friendly and highly efficient method for the synthesis of 4-4/sup '/-diaminodiphenyl- urea and direct dyes derived form it has been reported. The reported method is environmentally friendly, as it doesn't involve the usage of environmentally hazardous material like phosgene and tri phosgene. Novel azo dyes have been prepared by the coupling of 4-4/sup '/-Diamino diphenylurea with various couplers. Structure elucidation of the synthesized dyes was carried out by IR, NMR, Elemental analysis, and confirmation was made by Mass Spectrometry. The dyeing performance of these dyes was assessed on cotton fabric. The dye bath exhaustion, sublimation and fastness properties were also determined. The dyed fabric showed moderate to good light fastness and very good to excellent fastness properties for washing, rubbing, perspiration, and sublimation. (author)

Quantifying environmental performance using an environmental footprint calculator

Energy Technology Data Exchange (ETDEWEB)

Smith, D.B.; Loney, A.C.; Chan, V. [Conestoga-Rovers & Associates, Waterloo, Ontario (Canada)

2009-07-01

This paper provides a case study using relevant key performance indicators (KPIs) to evaluate the environmental performance of a business. Using recognized calculation and reporting frameworks, Conestoga-Rovers & Associates (CRA) designed the Environmental Footprint Calculator to quantify the environmental performance of a Canadian construction materials company. CRA designed the Environmental Footprint calculator for our client to track and report their environmental performance in accordance with their targets, based on requirements of relevant guidance documents. The objective was to design a tool that effectively manages, calculates, and reports environmental performance to various stakeholders in a user-friendly format. (author)

Quantifying environmental performance using an environmental footprint calculator

International Nuclear Information System (INIS)

Smith, D.B.; Loney, A.C.; Chan, V.

2009-01-01

This paper provides a case study using relevant key performance indicators (KPIs) to evaluate the environmental performance of a business. Using recognized calculation and reporting frameworks, Conestoga-Rovers & Associates (CRA) designed the Environmental Footprint Calculator to quantify the environmental performance of a Canadian construction materials company. CRA designed the Environmental Footprint calculator for our client to track and report their environmental performance in accordance with their targets, based on requirements of relevant guidance documents. The objective was to design a tool that effectively manages, calculates, and reports environmental performance to various stakeholders in a user-friendly format. (author)

Simple and environmentally friendly preparation and size control of silver nanoparticles using an inhomogeneous system with silver-containing glass powder

International Nuclear Information System (INIS)

Mori, Yasutaka; Tagawa, Toshio; Fujita, Masanori; Kuno, Toyohiko; Suzuki, Satoshi; Matsui, Takemi; Ishihara, Masayuki

2011-01-01

A simple, environmentally friendly method for preparing highly size-controlled spherical silver nanoparticles was developed that involved heating a mixture of silver-containing glass powder and an aqueous solution of glucose. The stabilizing agent for silver nanoparticles was found to be caramel, which was generated from glucose when preparing the nanoparticles. The particle size was independent of the reaction time, but it increased proportionally with the square root of the glucose concentration in the range 0.25–8.0 wt% (corresponding to particle sizes of 3.48 ± 1.83 to 20.0 ± 2.76 nm). Difference of the generation mechanism of silver nanoparticles between this inhomogeneous system and a system in which Ag + was homogeneously dispersed was discussed.

Creating at university the environment friendly for studies, students' employment, and family : approach of students

OpenAIRE

Sidlauskienė, Virginija

2011-01-01

The main aim of EQUAL project "FAMILY UNIVERSE: Family-Friendly Organization" was to create and to test innovative methodology and means for educational institutions and organizations, starting to reconcile family and professional life and trying to change stereotypical gender roles in the family and in the work, by forming family-friendly study and work environment in Siauliai University. Conditions for the establishment of family oriented organization at University of Šiauliai are analysed ...

Fiscal 1997 survey report. Feasibility study of the environmentally friendly type coal utilization system (feasibility study of the environmentally friendly type coal utilization system in India); 1997 nendo chosa hokokusho. Kankyo chowagata sekitan riyo system kanosei chosa (Indo ni okeru kankyo chowagata sekitan riyo system kanosei chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The survey was conducted of the present situation of coal utilization and the present coal situation such as the environmental state of India which is a coal producing/consuming country next to China in Asia. The paper studied a feasibility of the introduction of the environmental friendly type coal utilization system` to be planned in India. The items for survey are the present situation of economy and energy and the future trend, environmental problems on coal utilization, the present status of the coal distribution system and study subjects, the present status of coal utilization by field and study subjects, a possibility of briquette use, a possibility of coal fluidization, electric power development plans and coal combustion technology in each industry, etc. The subjects are the obligation of coal preparation to coal thermal power plants 1000 km away from coal mines starting 2001, measures taken for effective ash use, measures taken for superannuated gas furnaces, etc. Based on the results of these site surveys and reports of the investigation under consignment from CMPDI, the paper studied/analyzed possibilities of introducing the coal utilization system having actual introduction results in Japan to India, and made an investigational report. 39 refs., 12 figs., 56 tabs.

Electroluminescence light emitting diodes - an environmental friendly approach

International Nuclear Information System (INIS)

Shaukat, S.F.; Farooq, R.

2005-01-01

The simple porous silicon-based devices producing stable electroluminescence (EL) by the deposition of a poly-4-dicyanomethylene-4H-cyclopenta dithiophene monolayer (PCDM) into the nanostructure was reported. The structure of these devices is Au/PCDM/porous silicon/Si/Al. The EL emission is bright, visible by the naked eye under normal daylight and broad in wavelength covering the whole visible range with a peak at 60 nm. The emission area of the devices is 1 cm/sup 2/. The El starting voltage is in the range of 14-30 V and the current is around 300 mA. The time stability was good for all the devices tested. After exposure to the air for more than three months, the devices show nearly the same emission intensity without increase of external power supplied. (author)

[Microbial "friend-foe" identification in human intestine microsymbiocenosis].

Science.gov (United States)

Bukharin, O V; Petrunova, N B

2011-01-01

Development of methodical approach of evaluation of microbial "friend-foe" identification in human intestine microsymbiocenosis. 9 bifidobacteria cultures (dominants) and 18 opportunistic microorganism strains (associants) isolated from patients during examination for intestine dysbiosis and identified by conventional methods were used. Evaluation of microbial "friend-foe" identification in microsymbiocenosis was performed by author developed technique that is based on determination of growth factors (GF), anti-lysozyme activity (ALA) and formation of biofilms (BFF) of associants co-incubated with exometabolites of dominants. GF, ALA, BFF were studied photometrically (Bukharin O.V., 1999, 2009; O'Toole G.A., 2000). The data were statistically analyzed by Fisher-Student criteria. The detected opposite (increase/reduction) phenomenon of the "dominant-associant" pair allowed realization of the "friend-foe" identification in microsymbiocenosis. Associants (E. coli and Enterococcus faecium) were "friend" species, in which bifidobacteria exometabolites did not change growth properties and stimulated ALA (by 17,5--32%) and BFF (by 25 - 39%). Associants (Escherichia coli, Klebsiella pneumoniae, Staphylococcus aureus, Candida albicans) were "foe" microsymbiont species, in which bifidoflora exometabolites decreased GF (by 20,7--68%), ALA (by 22,7--54%) and BFF (by 22,5 --39%). Indigenous microflora during microsymbiocenosis formation can participate in "friend-foe" identification, the basis of which is determined by microsymbiont exometabolites. The data obtained open a perspective of understanding mechanisms of intramicrobial interactions and can be used for both diagnostics and optimal selection of "candidates" during creation of new probiotics and synbiotics.

Easy, fast and environmental friendly method for the simultaneous extraction of the 16 EPA PAHs using magnetic molecular imprinted polymers (mag-MIPs).

Science.gov (United States)

Villar-Navarro, Mercedes; Martín-Valero, María Jesús; Fernández-Torres, Rut Maria; Callejón-Mochón, Manuel; Bello-López, Miguel Ángel

2017-02-15

An easy and environmental friendly method, based on the use of magnetic molecular imprinted polymers (mag-MIPs) is proposed for the simultaneous extraction of the 16 U.S. EPA polycyclic aromatic hydrocarbons (PAHs) priority pollutants. The mag-MIPs based extraction protocol is simple, more sensitive and low organic solvent consuming compared to official methods and also adequate for those PAHs more retained in the particulate matter. The new proposed extraction method followed by HPLC determination has been validated and applied to different types of water samples: tap water, river water, lake water and mineral water. Copyright © 2017 Elsevier B.V. All rights reserved.

Reducing environmental damages caused by transportation: towards an heterodox approach

International Nuclear Information System (INIS)

Marletto, Gerardo

2006-01-01

According to orthodox economics, monetary incentives are the best way to reduce environmental damages caused by transportation. This approach is consistent with the consideration of environmental damages as a market failure and with the use of pigouvian taxes to re-establish market equilibrium. Using heterodox economics both the theoretical and the policy approach will change radically. Indeed, market is just one of the structural components of the existing transport system; others being: institutions, technologies, values. Then, a shift in policy approaches is needed: from the orthodox efficient allocation of existing resources, to the heterodox promotion of new development patterns, needed to alter the given structural situation. Consistently with this paradigmatic shift, environmental damages caused by transportation can be reduced only by making the transition to a new transport system viable. Moreover, an heterodox approach to the reduction of environmental damages caused by transportation gives rise to a sound revision of policy tools; among these must be considered: selective industrial policies to foster the ecological reconversion of transport supply (instead of a non-discriminatory support to ecological innovations); participatory decision procedures to evaluate and select transport policies (instead of neutral technical tools - such as Cba or Eia); information campaigns based on ethical considerations (instead of economic incentives to transport demand); attribution of the status of commons to environmental resources, in order to protect them from the free riding of transport activities (instead of the attribution to them of private property rights). This essay is composed of four parts. In the first one, some data on environmental damages caused by transportation in Italy are shown. In the second one, orthodox and heterodox paradigms of public interventions in the economy are compared, with a specific attention to environmental applications. In the

Eco-Friendly Magnetic Iron Oxide Pillared Montmorillonite for Advanced Catalytic Degradation of Dichlorophenol

Science.gov (United States)

Eco-friendly pillared montmorillonites, in which the pillars consist of iron oxide are expected to have interesting and unusual magnetic properties that are applicable for environmental decontamination. Completely “green” and effective composite was synthesized using mild reactio...

Friends Like Me: Associations in Overweight/Obese Status among Adolescent Friends by Race/Ethnicity, Sex, and Friendship Type.

Science.gov (United States)

Bruening, Meg; MacLehose, Richard; Eisenberg, Marla E; Kim, Sunkyung; Story, Mary; Neumark-Sztainer, Dianne

2015-12-01

Little is known about how interpersonal friend relationships are associated with obesity in young people, particularly with regard to how race/ethnicity, type of friendship, and sex affect the association between friends' and adolescents' weight status. This study examined associations in weight status among adolescents and their friends, exploring magnitudes of associations across friendship type, sex, and race/ethnicity. As part of EAT-2010 (Eating and Activity in Teens), friend nominations and anthropometrics were obtained from adolescents (n = 2099: 54% female; 80% nonwhite; mean age: 14.2 ± 1.9 years). Generalized estimating equation logistic regression models were used to test associations between adolescents' overweight/obese status and friends' (i.e., friend group, female friends, male friends, female best friends, and male best friends) overweight/obese status. Interactions by adolescent race/ethnicity were examined. The majority of significant associations were observed among white female adolescents' who had a 22-40% higher prevalence of overweight/obesity if their friends were overweight compared to white females whose friends were not overweight. In contrast, there were few significant differences for other adolescent female and male racial/ethnic groups for girls and boys. Results for friend groups and best friends were generally similar to one another. The association between friend and adolescent overweight/obese status depended on adolescents' sex, race/ethnicity, and friendship type. Given the similarities among friends, obesity interventions targeting youth, especially white females, should consider involving friends.

Environmental policy and the energy efficiency of vertically differentiated consumer products

International Nuclear Information System (INIS)

Brzeskot, Magdalena; Haupt, Alexander

2013-01-01

We analyse optimal environmental policies in a market that is vertically differentiated in terms of the energy efficiency of products. Considering energy taxes, subsidies to firms for investment in more eco-friendly products, and product standards, we are particularly interested in how distributional goals in addition to environmental goals shape the choice of policy instruments. We find that an industry-friendly government levies an energy tax to supplement a lax product standard, but shies away from subsidies to firms. By contrast, a consumer-friendly government relies heavily on a strict product standard and additionally implements a moderate subsidy to firms, but avoids energy taxes. - Highlights: ► We analyse how distributional goals shape environmental policy. ► Firms invest in the energy efficiency of their products and compete in prices. ► An industry-friendly government implements an energy tax and a lax product standard. ► A consumer-friendly government chooses a subsidy to firms instead of an energy tax. ► A consumer-friendly government implements a strict energy efficiency standard

Friend Finder (Game)

Science.gov (United States)

... for a spot on the Friend Finder All-Star List. Earn your spot by showing you're savvy when it comes to making friends online . Downloads Please download and share our ... Email Updates Blog Feed Facebook YouTube Twitter The Federal Trade Commission (FTC) is the ...

Pressure Shell Approach to Integrated Environmental Protection

Science.gov (United States)

Kennedy, Kriss J.

2011-01-01

The next generation of exploration mission human systems will require environmental protection such as radiation protection that is effective and efficient. In order to continue human exploration, habitat systems will require special shells to protect astronauts from hostile environments. The Pressure Shell Approach to integrated environmental (radiation) protection is a multi-layer shell that can be used for multifunctional environmental protection. Self-healing, self-repairing nano technologies and sensors are incorporated into the shell. This shell consists of multiple layers that can be tailored for specific environmental protection needs. Mainly, this innovation focuses on protecting crew from exposure to micrometeorites, thermal, solar flares, and galactic cosmic ray (GCR) radiation. The Pressure Shell Approach consists of a micrometeoroid and secondary ejecta protection layer; a thin, composite shell placed in between two layers that is non-structural; an open cavity layer that can be filled with water, regolith, or polyethylene foam; a thicker composite shell that is a structural load bearing that is placed between two layers; and a bladder coating on the interior composite shell. This multi-layer shell creates an effective radiation protection system. Most of its layers can be designed with the materials necessary for specific environments. In situ materials such as water or regolith can be added to the shell design for supplemental radiation protection.

Innovative Approaches in Distance Education in the Field of Environmental Management and Environmental Technologies

Directory of Open Access Journals (Sweden)

Leontev Mikhail

2016-01-01

Full Text Available This article discusses the innovative structures and components of distance learning and education, discusses the results of application of approaches to teaching in the electronic environment based on the proposed andragogic and pedagogical models of teaching in cyberspace, for adult learners, bachelor graduates of “Management” for the training program “Introduction to environmental management systems”. This program particularly addresses the role of environmental managers in a company activity, the implementation of ecologically clean technologies. The author proposed an innovative nonlinear andragogic model of learning. The model was mediated by the constructive approach and problem-oriented learning.

Environmental hazards for pipelines in coastal regions/shore approaches

International Nuclear Information System (INIS)

Jinsi, B.K.

1995-01-01

Often oil/gas and other hydrocarbons discovered and produced offshore are transported to onshore facilities via submarine pipelines. The route of such pipelines traverses through coastal/shore approach regions. For a rational/economic design, safe installation and subsequent operation it is of utmost importance to review, evaluate and finalize various environmental hazard such as winds, waves, currents, seabed topography, seabed and sub-bottom soils, seabed erosion and soil accretion. This paper addresses the above described environmental hazards, their assessment and techniques to prepare design parameters which must be used for stability analysis, installation methods, long term operation and maintenance for the shore approaches. Additionally, various proven pipeline installation and stabilization techniques for the shore approach region are detailed. As case histories, three approaches installed in the Dutch North Sea are described

Evaluating the FRIENDS Programme in a Scottish Setting

Science.gov (United States)

Liddle, Ian; Macmillan, Susan

2010-01-01

This study used an "indicated prevention" approach to attempt to replicate very positive international evaluations of the FRIENDS for Life programme. Using standardised self-report measures of anxiety, low mood and self esteem with groups of children from four schools, the study found significant improvements in all of these measures…

Environmental groups in politics

International Nuclear Information System (INIS)

Lowe, P.; Goyder, J.

1983-01-01

The subject is covered in chapters, entitled: introduction; (Part I) the environmental movement (environmental groups and the attentive public; the episodic development of the environmental movement; the underlying values of environmentalism; the roots of environmental concern; the social limits to growth; elite manipulation of values); the organisation of environmental groups; environmental groups in national politics; environmental groups in local politics; (Part II) the Henley Society; Friends of the Earth; the National Trust; the Royal Society for Nature Conservation; the European Environmental Bureau. (U.K.)

Lobbying friends and foes in climate policy: The case of business and environmental interest groups in the European Union

International Nuclear Information System (INIS)

Gullberg, Anne Therese

2008-01-01

Drawing on two conflicting hypotheses from the theoretical literature on lobbying, I consider the strategies applied by interest groups lobbying to influence climate policy in the European Union (EU). The first hypothesis claims that interest groups lobby their 'friends', decision-makers with positions similar to their own. The second claims that interest groups lobby their 'foes', decision-makers with positions opposed to their own. Using interviews with lobbyists and decision-makers, I demonstrate that in the field of climate policy, interest groups in the EU lobby both friends and foes, but under different conditions. Moreover, I find that the interest groups' motives are not always in line with the theoretical hypotheses. Interest groups lobby their friends on single policy decisions to exchange information, to further a common cause and to exert pressure, and their foes because a foe on one issue might prove to be a friend on another issue. Interest groups direct general lobbying towards both friends and foes. This paper provides a new empirical contribution to a literature that has so far been heavily dominated by studies focusing on lobbying in the US

A novel ontology approach to support design for reliability considering environmental effects.

Science.gov (United States)

Sun, Bo; Li, Yu; Ye, Tianyuan; Ren, Yi

2015-01-01

Environmental effects are not considered sufficiently in product design. Reliability problems caused by environmental effects are very prominent. This paper proposes a method to apply ontology approach in product design. During product reliability design and analysis, environmental effects knowledge reusing is achieved. First, the relationship of environmental effects and product reliability is analyzed. Then environmental effects ontology to describe environmental effects domain knowledge is designed. Related concepts of environmental effects are formally defined by using the ontology approach. This model can be applied to arrange environmental effects knowledge in different environments. Finally, rubber seals used in the subhumid acid rain environment are taken as an example to illustrate ontological model application on reliability design and analysis.

An environmental friendly animal waste disposal process with ammonia recovery and energy production: Experimental study and economic analysis.

Science.gov (United States)

Shen, Ye; Tan, Michelle Ting Ting; Chong, Clive; Xiao, Wende; Wang, Chi-Hwa

2017-10-01

Animal manure waste is considered as an environmental challenge especially in farming areas mainly because of gaseous emission and water pollution. Among all the pollutants emitted from manure waste, ammonia is of greatest concern as it could contribute to formation of aerosols in the air and could hardly be controlled by traditional disposal methods like landfill or composting. On the other hand, manure waste is also a renewable source for energy production. In this work, an environmental friendly animal waste disposal process with combined ammonia recovery and energy production was proposed and investigated both experimentally and economically. Lab-scale feasibility study results showed that 70% of ammonia in the manure waste could be converted to struvite as fertilizer, while solid manure waste was successfully gasified in a 10kW downdraft fixed-bed gasifier producing syngas with the higher heating value of 4.9MJ/(Nm 3 ). Based on experimental results, economic study for the system was carried out using a cost-benefit analysis to investigate the financial feasibility based on a Singapore case study. In addition, for comparison, schemes of gasification without ammonia removal and incineration were also studied for manure waste disposal. The results showed that the proposed gasification-based manure waste treatment process integrated with ammonia recovery was most financially viable. Copyright © 2017 Elsevier Ltd. All rights reserved.

A system approach to the environmental analysis of industrial buildings

Energy Technology Data Exchange (ETDEWEB)

San-Jose Lombera, Jose-Tomas [LABEIN-Tecnalia, C/Geldo, Parque Tecnologico de Bizkaia, Edificio 700, 48160 Derio (Vizcaya) (Spain); Department of Science of Materials, ESTSI Bilbao-University of Basque Country (UPV/EHU), Alda, Urquijo s/n, 48013 Bilbao (Spain); Garrucho Aprea, Isaac [SEDICAL S.A., Txorierri Etorbidea 46 - Pab, 12 F 48150 Sondica (Vizcaya) (Spain)

2010-03-15

The construction sector plays a major role in the development of society. It wields enormous influence over economic activity, employment and growth rates. However, it also has a substantial impact on the natural environment, the effects of which are evident across the world. Over recent decades, pioneering initiatives have proposed environmentally friendly buildings and sustainable construction has centred on residential and office buildings. Nevertheless, further consideration still needs to be given to sustainability in many areas of industrial construction. Accordingly, an Integrated Value Model for Sustainable Assessment (MIVES) is presented in this article that applies a set of six study scopes to define the sustainability criteria of industrial buildings. The system uses a requirements tree to quantify sustainability at various hierarchical levels, in order to assess the behaviour of industrial buildings and compliance with the criteria. Assignment of value functions to the sustainability criteria is then described in the context of a case study of a printing works, which demonstrates the effectiveness of this model at unifying both qualitative and quantitative indicators, in order to arrive at a specific ''environmental sustainability index'' for the industrial building. (author)

Environmentally-Friendly Synthesis of Carbonate-Type Macrodiols and Preparation of Transparent Self-Healable Thermoplastic Polyurethanes

Directory of Open Access Journals (Sweden)

Seon-Mi Kim

2017-11-01

Full Text Available Carbonate-type macrodiols synthesized by base-catalyzed polycondensation of co-diols and dimethyl carbonate as an environmentally-friendly route were subsequently utilized for the preparation of transparent and self-healable thermoplastic polyurethanes (TPUs containing a carbonate-type soft segment. Three types of macrodiols, obtained from mono, dual and triple diol-monomers for target molecular weights of 1 and 1.5 kg mol−1, were analyzed by 1H NMR integration and the OH titration value. Colorless transparent macrodiols in a liquid state at a room temperature of 20 °C were obtained, except the macrodiol from mono 1,6-hexanediol. Before TPU synthesis, macrodiols require pH neutralization to prevent gelation. TPUs synthesized by a solution pre-polymer method with 4,4′-methylene(bisphenyl isocyanate and 1,4-butanediol as a chain extender exhibited moderate molecular weights, good transparencies and robust mechanical properties. Especially, the incorporation of 3-methyl-1,5-pentanediol within carbonate-type macrodiols enhanced the transparency of the resultant TPUs by decreasing the degree of microphase separation evidenced by ATR-FTIR and DSC. Interestingly, packing density of hard segments and the degree of microphase separation determined the self-healing efficiency of TPUs, which showed good performances in the case of sourced macrodiols from triple diol-monomers.

Dispersion stability and thermophysical properties of environmentally friendly graphite oil–based nanofluids used in machining

Directory of Open Access Journals (Sweden)

Yu Su

2016-01-01

Full Text Available As environmentally friendly cutting fluids, vegetable-based oil and ester oil are being more and more widely used in metal cutting industry. However, their cooling and lubricating properties are required to be further improved in order to meet more cooling and lubricating challenges in high-efficiency machining. Nanofluids with enhanced heat carrying and lubricating capabilities seem to give a promising solution. In this article, graphite oil–based nanofluids with LB2000 vegetable-based oil and PriEco6000 unsaturated polyol ester as base fluids were prepared by ultrasonically assisted two-step method, and their dispersion stability and thermophysical properties such as viscosity and thermal conductivity were experimentally and theoretically investigated at different ultrasonication times. The results indicate that graphite-PriEco6000 nanofluid showed better dispersion stability, higher viscosity, and thermal conductivity than graphite-LB2000 nanofluid, which made it more suitable for application in high-efficiency machining as coolant and lubricant. The theoretical classical models showed good agreement with the thermal conductivity values of graphite oil–based nanofluids measured experimentally. However, the deviation between the experimental values of viscosity and the theoretical models was relatively big. New empirical correlations were proposed for predicting the viscosity of graphite oil–based nanofluids at various ultrasonication times.

Environmentally Friendly Luxury Hotel : case: Grand Palace Hotel, Riga, Latvia

OpenAIRE

Losanwe, Ieva

2013-01-01

Chemical pollution, loss of biodiversity, ecological and other to environmental issues addressing words are often heard in todays’ society. Sustainability and especially its environmental aspect are growing trend. Environmental sustainability is considerable issues as well in tourism industry. Hotels can decrease their negative impact on environment by following and implementing environmentally sustainable practices at their business. Any step towards sustainability benefits both the environm...

One-step green synthesis of cuprous oxide crystals with truncated octahedra shapes via a high pressure flux approach

International Nuclear Information System (INIS)

Li Benxian; Wang Xiaofeng; Xia Dandan; Chu Qingxin; Liu Xiaoyang; Lu Fengguo; Zhao Xudong

2011-01-01

Cuprous oxide (Cu 2 O) was synthesized via reactions between cupric oxide (CuO) and copper metal (Cu) at a low temperature of 300 deg. C. This progress is green, environmentally friendly and energy efficient. Cu 2 O crystals with truncated octahedra morphology were grown under high pressure using sodium hydroxide (NaOH) and potassium hydroxide (KOH) with a molar ratio of 1:1 as a flux. The growth mechanism of Cu 2 O polyhedral microcrystals are proposed and discussed. - Graphical Abstract: The Cu 2 O crystals with truncated octahedral shape were one-step synthesized in high yield via high pressure flux method for the first time, which is green and environmentally friendly. The mechanisms of synthesis and crystal growth were discussed in this paper. Highlights: → Cuprous oxide was one-step green synthesized by high pressure flux method. → The approach was based on the reverse dismutation reactions between cupric oxide and copper metal. → This progress is green, environmentally friendly and energy efficient. → The synthesized Cu2O crystals were of truncated octahedra morphology.

Evaluation of negative environmental impacts of electricity generation: Neoclassical and institutional approaches

International Nuclear Information System (INIS)

Kim, Sang-Hoon

2007-01-01

Neoclassical and institutional economics have developed different theories and methodologies for evaluating environmental and social impacts of electricity generation. The neoclassical approach valuates external costs, and the institutional approach uses social cost valuation and MCDM methods. This paper focuses on three dimensions: theoretical and methodological backgrounds; critical review of specific studies: methodologies, results, and limitations; and discussing their results and implications for environmental policy and further research. The two approaches lead to a common conclusion that fossil fuels and nuclear power show the highest environmental impact. Despite the common conclusion, the conclusion has limited implications for environmental policy because of the weakness of their methodologies

LiNbO3 Coating on Concrete Surface: A New and Environmentally Friendly Route for Artificial Photosynthesis

Directory of Open Access Journals (Sweden)

Ranjit K. Nath

2013-01-01

Full Text Available The addition of a photocatalyst to ordinary building materials such as concrete creates environmentally friendly materials by which air pollution or pollution of the surface can be diminished. The use of LiNbO3 photocatalyst in concrete material would be more beneficial since it can produce artificial photosynthesis in concrete. In these research photoassisted solid-gas phases reduction of carbon dioxide (artificial photosynthesis was performed using a photocatalyst, LiNbO3, coated on concrete surface under illumination of UV-visible or sunlight and showed that LiNbO3 achieved high conversion of CO2 into products despite the low levels of band-gap light available. The high reaction efficiency of LiNbO3 is explained by its strong remnant polarization (70 µC/cm2, allowing a longer lifetime of photoinduced carriers as well as an alternative reaction pathway. Due to the ease of usage and good photocatalytic efficiency, the research work done showed its potential application in pollution prevention.

Ionic Liquids: An Environmentally Friendly Media for Nucleophilic Substitution Reactions

International Nuclear Information System (INIS)

Jorapur, Yogesh R.; Chi, Dae Yoon

2006-01-01

Ionic liquids are alternative reaction media of increasing interest and are regarded as an eco-friendly alternatives, of potential use in place of the volatile organic solvents typically used in current chemical processing methods. They are emerging as the smart and excellent solvents, which are made of positive and negative ions that they are liquids near room temperature. The nucleophilic substitution reaction is one of the important method for inserting functional groups into a carbon skeleton. Many nucleophilic substitution reactions have been found with enhanced reactivity and selectivity in ionic liquid. In this review, some recent interesting results of nucleophilic substitution reactions such as hydroxylations, ether cleavages, carbon-X (X = carbon, oxygen, nitrogen, fluorine) bond forming reactions, and ring opening of epoxides in ionic liquids are discussed

Ecological Economics: Themes, Approaches, and Differences with Environmental Economics

OpenAIRE

Jeroen C.J.M. van den Bergh

2000-01-01

This provides a short overview of the main themes of ecological economics (EE). It isargued that EE provides a platform that fosters multidisciplinary environmental research bybringing together the core contributing disciplines economics and ecology. In addition, EE isregarded as a pluralistic approach to environmental research that can be set opposite to, and hasindeed developed as a response to, traditional environmental and resource economics. Acomparison of the two fields is presented to ...

Performance appraisal for green/environmental friendliness of a supply chain department

Directory of Open Access Journals (Sweden)

Solomon Olasunkanmi Odeyale

2014-10-01

Full Text Available Purpose: This paper aims at proposing a method for evaluating the environmental friendliness of a supply chain department in any organization. Supply chain involves activities that could affect the natural environment and if these activities are not properly evaluated and monitored, it could affect the natural environment and also generate ecological performance change. Design/methodology/approach: The model for the appraisal consists of 5 criteria and 30 subcriteria. The method is applied at 3 level; beginning with finding the relative weight of the subcriteria under each criterion using Analytic Hierarchy Process (AHP, followed by computing the value associated with each level descriptor in a scale. Some subcriteria have 5 level descriptors (very strong/moderate /weak/very weak / no, some subcriteria have 3 level descriptors (always / sometimes/ never and some have 2 levels descriptor (yes/no. Finally the method is concluded by the means of an additive model, whereby the weight associated with each subcriteria is multiplied by the corresponding level descriptor and summed up to get the limit/state. This methodology is called the weighing multiplication and additive model (WMAAM. Finding: Supply chain (SC involves operational activities and for these activities to be environmental friendly, they have been categorized under criteria namely; green design, green procurement, green manufacturing, environmental management and green marketing. These criteria which consist of 30 subcriteria are evaluated in other to compute the overall environmental friendly appraisal of the SC department. Practical Implication: The study plays important role in understanding various areas to be monitored and considered during supply chain activities in order to achieve a green supply chain management or an environmental friendly supply chain. Originality/value: The main contribution of this work is to propose an effective methodology that guides SC practitioners on

Can Naturbanization Promote Environmentally Friendly Built-Up Areas? A Comparison Between Cadí-Moixeró (Catalonia, Spain and Comana (Romania Natural Parks

Directory of Open Access Journals (Sweden)

Tulla Antoni-Francesc

2017-12-01

Full Text Available The study compares the on-going naturbanization processes in and around two Natural Parks under the impact of newcomers, but also tourists from Barcelona and Bucharest and their metropolitan areas. The landscape value of these areas attracts the urban population, which contributes to local sustainable development process but also promotes construction. New businesses associated with rural multifunctionality and value-added activities related to environmental quality were identified. New residents have contributed introducing responsible patterns of consumer, ecoentrepreneurship by women, recovery of abandoned buildings and intensification of rural-urban relationships. Negative impacts such as intensive construction of second homes, with a lower use, in some areas around Cadí-Moixeró threaten biodiversity and habitat connectivity. Insufficient integration of environmental policies, particularly in the Comana wetlands, reduces the potential for rural renewal. Research methods included a review of the counterurbanization literature and the statistical data related to processes of naturbanization in both areas, along with the conduct of 30 structured interviews with key local actors in each area. Naturbanization still offers the potential to enhance local development; however, it is urgent to assess social perspectives in natural parks management in order to achieve environmentally friendly built-up areas.

Swedish Upper Secondary School Students’ Conceptions of Negative Environmental Impact and Pricing

Directory of Open Access Journals (Sweden)

Cecilia Lundholm

2013-03-01

Full Text Available This study explores relationships between upper secondary school students’ understanding of prices and environmental impacts. The study uses responses from 110 students to problems in which they were asked to explain differences in prices and also to express and justify opinions on what should be the difference in prices. Very few students expressed an environmental dimension in their understanding of price. A few students suggested that environmental impact influenced price by raising demand for “Environmentally friendly products”. A few students suggested that ‘environmentally friendly products’ had higher prices because they were more costly to produce. We found no examples of students combining both lines of explanation. However, nearly half of the students believed that prices should reflect environmental effects, and this reasoning was divided between cases where the point was justified by a broad environmental motivation and cases where the point was justified in relation to incentives–to get consumers to act in a more environmentally friendly way.

"Friends" of Anglican Cathedrals: Norms and Values. Befriending, Friending or Misnomer?

Science.gov (United States)

Muskett, Judith A.

2013-01-01

Loyal supporters of Anglican cathedrals first subscribed to "Friends" associations in the late 1920s. Yet, in 1937, a journalist in "The Times" portrayed cathedrals as a "queer thing to be a friend of." Drawing on theories of friendship from a range of disciplines, and surveys of what has been proclaimed in the public…

Green dentistry, a metamorphosis towards an eco-friendly dentistry: a short communication.

Science.gov (United States)

Rastogi, Varun; Sharma, Rachna; Yadav, Lalita; Satpute, Pranali; Sharma, Vandana

2014-07-01

Dentistry is most importantly and foremost a healing profession. In today's world, it is very necessary to understand the importance of being eco-friendly in every facet of our lives, including dental practice which has a huge impact on the environment due to the large amount of metallic waste generated by various dental procedures along with excessive use of water and electricity, which specifically emphasis the thrust to move towards 'Green dentistry'. Green dentistry is an innovative way of dental practice which is environment friendly and at the same time conserves money and time by reducing waste, conserving energy and decreasing pollution with the use of latest techniques and procedures. Green dentistry therefore, protects the environment and mankind from the hazards of rapid urbanisation in developing countries. The authors wish to emphasize the practice of eco-friendly, green dentistry in a developing country like India which needs to conserve resources and curb environmental pollution.

Lumped parameter models for the interpretation of environmental tracer data

Energy Technology Data Exchange (ETDEWEB)

Maloszewski, P [GSF-Inst. for Hydrology, Oberschleissheim (Germany); Zuber, A [Institute of Nuclear Physics, Cracow (Poland)

1996-10-01

Principles of the lumped-parameter approach to the interpretation of environmental tracer data are given. The following models are considered: the piston flow model (PFM), exponential flow model (EM), linear model (LM), combined piston flow and exponential flow model (EPM), combined linear flow and piston flow model (LPM), and dispersion model (DM). The applicability of these models for the interpretation of different tracer data is discussed for a steady state flow approximation. Case studies are given to exemplify the applicability of the lumped-parameter approach. Description of a user-friendly computer program is given. (author). 68 refs, 25 figs, 4 tabs.

Lumped parameter models for the interpretation of environmental tracer data

International Nuclear Information System (INIS)

Maloszewski, P.; Zuber, A.

1996-01-01

Principles of the lumped-parameter approach to the interpretation of environmental tracer data are given. The following models are considered: the piston flow model (PFM), exponential flow model (EM), linear model (LM), combined piston flow and exponential flow model (EPM), combined linear flow and piston flow model (LPM), and dispersion model (DM). The applicability of these models for the interpretation of different tracer data is discussed for a steady state flow approximation. Case studies are given to exemplify the applicability of the lumped-parameter approach. Description of a user-friendly computer program is given. (author). 68 refs, 25 figs, 4 tabs

Evaluating Sustainability of Household Consumption Using DEA to Assess Environmental Performance

DEFF Research Database (Denmark)

Christoffersen, Line Block; Jensen, Trine Susanne; Wier, Mette

2005-01-01

We assess environmental performance across product types and across household types in order to evaluate environmental pressure from human activities. To so do, we combine family budget statistics, input-output tables, energy and material flow matrices, various types of emissions and environmenta...... friendly consumption pattern. Middle income families living in houses have the least environmentally friendly consumer basket, and these families constitute a high share of all families in Denmark....

Societal embedding of climate-friendly innovations

International Nuclear Information System (INIS)

Vaeyrynen, E.; Kivisaari, Sirkku; Lovio, R.

2002-01-01

This project assesses the possibilities of constructing a market for climate-friendly energy technologies by applying the process of 'societal embedding of innovations'. The term refers to an interactive learning process amongst three groups of key actors: producers, users and societal actors. Their co-operation shapes the innovation to fit the needs of the market and contributes to creation of conditions in which the innovation can be adopted. The project consists of two case studies: (1) Shaping of the ESCO energy service concept in Finnish municipalities and (2) Increasing the use of wood pellets in single-family houses. The case studies have illustrated the possibilities and limitations concerning the application of societal embedding in the energy sector. The project indicates that societal embedding may promote the implementation of climate-friendly energy technologies in at least three ways. Firstly, the process mobilises key actors to cooperation. This generates interactive learning on the problem and its solving. Market construction is forged ahead by mutual adaptation of the innovation and its environment. Secondly, this approach offers a tool to examine the societal quality of the innovation, a question related vitally to climate change. Thirdly, by producing new knowledge of the needs on the market this approach supports the societal actors in choosing different instruments to induce the intended transition to sustainability. (orig.)

Derivative Quotient Spectrophotometry and an Eco-Friendly Micellar Chromatographic Approach with Time-Programmed UV-Detection for the Separation of Two Fluoroquinolones and Phenazopyridine

Science.gov (United States)

Tolba, Manar M.; Salim, Mohamed M.

2016-01-01

In this study, two analytical approaches were exploited for the resolution of binary mixtures of ciprofloxacin HCl (CIP) or norfloxacin (NOR) and phenazopyridine HCl (PHZ). In the first approach, the amplitudes of the first derivative of the ratio spectra were measured at 267 or 287 nm for CIP and at 268 or 291 nm for NOR. PHZ could be directly determined in the presence of CIP or NOR at 405 nm. The calibration graphs were rectilinear over the ranges of 1.0–16.0 µg/mL for CIP or NOR and 1.0–10.0 µg/mL for PHZ. In the second approach, an accurate, reliable and environmentally nontoxic micellar liquid chromatographic (MLC) method was developed. A good chromatographic separation was achieved using a 150 mm × 4.6 mm i.d., 5 µm particle size Spherisorb ODS-2 column. Eco-friendly mobile phase containing 0.12 M sodium dodecyl sulphate, 0.3% triethylamine and 6% n-butanol in 0.02 M orthophosphoric acid of pH 3.0 was pumped at a flow rate of 1 mL/min. Time programmed UV-detection was applied to allow sensitive determination of the studied drugs. The analytes were eluted without interferences in <10 min. Methocarbamol was used as an internal standard. The MLC method was found to be rectilinear over the concentration range of 0.5–20.0 μg/mL for CIP, NOR or PHZ. These optimized and validated methods were successfully applied for the simultaneous analysis of the studied drugs in their synthetic mixtures and co-formulated tablets. Moreover, the second method was further extended to the determination of these drugs in human urine with direct injection and without any pretreatment. PMID:26867555

Environmental investment and firm performance: A network approach

International Nuclear Information System (INIS)

Bostian, Moriah; Färe, Rolf; Grosskopf, Shawna; Lundgren, Tommy

2016-01-01

This study examines the role of investment in environmental production practices for both environmental performance and energy efficiency over time. We employ a network DEA approach that links successive production technologies through intertemporal investment decisions with a period by period estimation. This allows us to estimate energy efficiency and environmental performance separately, as well as productivity change and its associated decompositions into efficiency change and technology change. Incorporating a network model also allows us to account for both short-term environmental management practices and long-term environmental investments in each of our productivity measures. We apply this framework to a panel of detailed plant-level production data for Swedish manufacturing firms covering the years 2002–2008. - Highlights: • We use a network DEA model to account for intertemporal environmental investment decisionsin measures of firm productivity. • We apply our network technology model to a panel of firms in Sweden's pulp and paperindustry for the years 2002 - 2008. • We model environmental investments and expenditures separately from other productionoriented inputs. • We find evidence of positive relationships between energy efficiency, environmental performance, and firm productivity.

Marketing animal-friendly products

NARCIS (Netherlands)

Riemsdijk, van Lenka; Ingenbleek, Paul T.M.; Trijp, van Hans C.M.; Veen, van der Gerrita

2017-01-01

This article presents a conceptual framework that aims to encourage consumer animal-friendly product choice by introducing positioning strategies for animal-friendly products. These strategies reinforce the animal welfare with different types of consumption values and can therefore reduce

Marketing Animal-Friendly Products: Addressing the Consumer Social Dilemma with Reinforcement Positioning Strategies

Science.gov (United States)

Ingenbleek, Paul T.M.; van Trijp, Hans C.M.; van der Veen, Gerrita

2017-01-01

Simple Summary Modern production systems aimed at improving animal welfare are more costly than traditional systems. Animal-friendly products are therefore typically more expensive than mainstream products, which presents one of the main barriers to consumer animal-friendly product choice. To overcome this barrier, marketing strategies that associate animal welfare with different types of value, such as taste, healthiness or good feeling, may be useful. This article presents a theoretical framework with marketing strategies using various types of value, suitable for animal-friendly products to encourage consumers to buy animal-friendly instead of mainstream products. We also explain why some consumers, such as those with a rational or an intuitive thinking style, may be more sensitive to some strategies over others, giving directions to marketing managers on how to approach different types of consumers. Because the credibility of animal welfare claims is a critical issue in marketing animal-friendly products, we address this issue as well. Specifically, we propose that, to gain consumer trust, companies selling animal-friendly products need to take into account the impact of their overall strategy on the effectiveness of marketing strategies for individual products and that they may need to collaborate with relevant stakeholders, such as media or animal-interest organizations. Abstract This article presents a conceptual framework that aims to encourage consumer animal-friendly product choice by introducing positioning strategies for animal-friendly products. These strategies reinforce the animal welfare with different types of consumption values and can therefore reduce consumers’ social dilemma, which is a major barrier to animal-friendly consumer choices. The article suggests how animal-friendly products can use various types of consumption values (functional, sensory, emotional, social, epistemic and situational) to create an attractive position relative to

Realizing a facile and environmental-friendly fabrication of high-performance multi-crystalline silicon solar cells by employing ZnO nanostructures and an Al2O3 passivation layer

Science.gov (United States)

Chen, Hong-Yan; Lu, Hong-Liang; Sun, Long; Ren, Qing-Hua; Zhang, Hao; Ji, Xin-Ming; Liu, Wen-Jun; Ding, Shi-Jin; Yang, Xiao-Feng; Zhang, David Wei

2016-01-01

Nowadays, the multi-crystalline silicon (mc-Si) solar cells dominate the photovoltaic industry. However, the current acid etching method on mc-Si surface used by firms can hardly suppress the average reflectance value below 25% in the visible light spectrum. Meanwhile, the nitric acid and the hydrofluoric contained in the etching solution is both environmental unfriendly and highly toxic to human. Here, a mc-Si solar cell based on ZnO nanostructures and an Al2O3 spacer layer is demonstrated. The eco-friendly fabrication is realized by low temperature atomic layer deposition of Al2O3 layer as well as ZnO seed layer. Moreover, the ZnO nanostructures are prepared by nontoxic and low cost hydro-thermal growth process. Results show that the best passivation quality of the n+ -type mc-Si surface can be achieved by balancing the Si dangling bond saturation level and the negative charge concentration in the Al2O3 film. Moreover, the average reflectance on cell surface can be suppressed to 8.2% in 400–900 nm range by controlling the thickness of ZnO seed layer. With these two combined refinements, a maximum solar cell efficiency of 15.8% is obtained eventually. This work offer a facile way to realize the environmental friendly fabrication of high performance mc-Si solar cells. PMID:27924911

Application of eco-friendly tools and eco-bio-social strategies to control dengue vectors in urban and peri-urban settings in Thailand.

Science.gov (United States)

Kittayapong, Pattamaporn; Thongyuan, Suporn; Olanratmanee, Phanthip; Aumchareoun, Worawit; Koyadun, Surachart; Kittayapong, Rungrith; Butraporn, Piyarat

2012-12-01

Dengue is considered one of the most important vector-borne diseases in Thailand. Its incidence is increasing despite routine implementation of national dengue control programmes. This study, conducted during 2010, aimed to demonstrate an application of integrated, community-based, eco-bio-social strategies in combination with locally-produced eco-friendly vector control tools in the dengue control programme, emphasizing urban and peri-urban settings in eastern Thailand. Three different community settings were selected and were randomly assigned to intervention and control clusters. Key community leaders and relevant governmental authorities were approached to participate in this intervention programme. Ecohealth volunteers were identified and trained in each study community. They were selected among active community health volunteers and were trained by public health experts to conduct vector control activities in their own communities using environmental management in combination with eco-friendly vector control tools. These trained ecohealth volunteers carried out outreach health education and vector control during household visits. Management of public spaces and public properties, especially solid waste management, was efficiently carried out by local municipalities. Significant reduction in the pupae per person index in the intervention clusters when compared to the control ones was used as a proxy to determine the impact of this programme. Our community-based dengue vector control programme demonstrated a significant reduction in the pupae per person index during entomological surveys which were conducted at two-month intervals from May 2010 for the total of six months in the intervention and control clusters. The programme also raised awareness in applying eco-friendly vector control approaches and increased intersectoral and household participation in dengue control activities. An eco-friendly dengue vector control programme was successfully implemented in

Application of eco-friendly tools and eco-bio-social strategies to control dengue vectors in urban and peri-urban settings in Thailand

Science.gov (United States)

Kittayapong, Pattamaporn; Thongyuan, Suporn; Olanratmanee, Phanthip; Aumchareoun, Worawit; Koyadun, Surachart; Kittayapong, Rungrith; Butraporn, Piyarat

2012-01-01

Background Dengue is considered one of the most important vector-borne diseases in Thailand. Its incidence is increasing despite routine implementation of national dengue control programmes. This study, conducted during 2010, aimed to demonstrate an application of integrated, community-based, eco-bio-social strategies in combination with locally-produced eco-friendly vector control tools in the dengue control programme, emphasizing urban and peri-urban settings in eastern Thailand. Methodology Three different community settings were selected and were randomly assigned to intervention and control clusters. Key community leaders and relevant governmental authorities were approached to participate in this intervention programme. Ecohealth volunteers were identified and trained in each study community. They were selected among active community health volunteers and were trained by public health experts to conduct vector control activities in their own communities using environmental management in combination with eco-friendly vector control tools. These trained ecohealth volunteers carried out outreach health education and vector control during household visits. Management of public spaces and public properties, especially solid waste management, was efficiently carried out by local municipalities. Significant reduction in the pupae per person index in the intervention clusters when compared to the control ones was used as a proxy to determine the impact of this programme. Results Our community-based dengue vector control programme demonstrated a significant reduction in the pupae per person index during entomological surveys which were conducted at two-month intervals from May 2010 for the total of six months in the intervention and control clusters. The programme also raised awareness in applying eco-friendly vector control approaches and increased intersectoral and household participation in dengue control activities. Conclusion An eco-friendly dengue vector control

From Family to Friends: Does Witnessing Interparental Violence Affect Young Adults’ Relationships with Friends?

Science.gov (United States)

Mandal, Mahua; Hindin, Michelle J.

2013-01-01

Purpose Childhood exposure to violence in one’s family of origin has been closely linked to subsequent perpetration and victimization of intimate partner violence. There is, however, little research on the relationship between witnessing violence and subsequent peer violence. This study investigates the effects of witnessing interparental violence among Filipino young adults on their use and experience of psychological aggression with friends. Methods The data source for this study was the Cebu Longitudinal Health and Nutrition Survey. Recent perpetration and victimization of friend psychological aggression among young adults ages 21–22 years was assessed through self-reports from the 2005 survey, and witnessing interparental violence during childhood was assessed through self-reports from the 2002 survey. Multinomial logistic regression was used to examine the effects of witnessing interparental violence on subsequent use and experience of friend psychological aggression. Analyses were stratified by gender. Results About 13% of females and 4% of males perpetrated psychological aggression towards close friends, and about 4% of females and males were victims. Fourteen percent of females and 3% of males experienced bidirectional psychological aggression. About 44% of females and 47% of males had, during childhood, witnessed their parents physically hurt one another. Witnessing maternal and reciprocal interparental violence during childhood significantly predicted bidirectional friend psychological aggression among males. Among females, witnessing interparental violence did not significantly predict involvement with friend psychological aggression. Conclusions Violence prevention programs should consider using family-centered interventions, and apply a gendered lens to their application. Further research on gender differences in friend aggression is recommended. PMID:23697789

Community-based approaches to strategic environmental assessment: Lessons from Costa Rica

International Nuclear Information System (INIS)

Sinclair, A. John; Sims, Laura; Spaling, Harry

2009-01-01

This paper describes a community-based approach to strategic environmental assessment (SEA) using a case study of the Instituto Costarricense de Electricidad's (ICE) watershed management agricultural program (WMAP) in Costa Rica. The approach focused on four highly interactive workshops that used visioning, brainstorming and critical reflection exercises. Each workshop represented a critical step in the SEA process. Through this approach, communities in two rural watersheds assessed the environmental, social and economic impacts of a proposed second phase for WMAP. Lessons from this community-based approach to strategic environmental assessment include a recognition of participants learning what a participatory SEA is conceptually and methodologically; the role of interactive techniques for identifying positive and negative impacts of the proposed program and generating creative mitigation strategies; the effect of workshops in reducing power differentials among program participants (proponent, communities, government agencies); and, the logistical importance of notice, timing and location for meaningful participation. The community-based approach to SEA offers considerable potential for assessing regional (watershed) development programs focused on sustainable resource-based livelihoods

Water soluble nano-scale transient material germanium oxide for zero toxic waste based environmentally benign nano-manufacturing

KAUST Repository

Almuslem, A. S.

2017-02-14

In the recent past, with the advent of transient electronics for mostly implantable and secured electronic applications, the whole field effect transistor structure has been dissolved in a variety of chemicals. Here, we show simple water soluble nano-scale (sub-10 nm) germanium oxide (GeO) as the dissolvable component to remove the functional structures of metal oxide semiconductor devices and then reuse the expensive germanium substrate again for functional device fabrication. This way, in addition to transiency, we also show an environmentally friendly manufacturing process for a complementary metal oxide semiconductor (CMOS) technology. Every year, trillions of complementary metal oxide semiconductor (CMOS) electronics are manufactured and billions are disposed, which extend the harmful impact to our environment. Therefore, this is a key study to show a pragmatic approach for water soluble high performance electronics for environmentally friendly manufacturing and bioresorbable electronic applications.

Future batteries will be environment-friendly

International Nuclear Information System (INIS)

Larcher, D.; Tarascon, J.M.

2012-01-01

Since the beginning of the nineties, efficient batteries have been built thanks to lithium. The use of nano-materials for the electrodes have recently opened the way to a cheaper and more environmental friendly technologies like lithium-iron-phosphate (LiFePO 4 ) batteries instead of classical lithium-ion batteries. Nano-materials enable the batteries to use more efficiently the electrode and to store more energy. Sustainable development requires the elaboration of clean processes to produce nano-materials, it appears that micro-organisms might be able to produce nano-metric minerals through bio-mineralisation, it is particularly true for FePO 4 because iron and phosphates are abundant biological components. (A.C.)

Dermatology Depictions in Friends/ Descripciones dermatológicas en Friends

Directory of Open Access Journals (Sweden)

Skyler M White

2017-03-01

Full Text Available Health?related topics are frequently referenced on screen in movies and television. Friends was on?air for 10 seasonsand is one of the most watched television shows of all time. Dermatology was referenced more than any otherhealth?related topic throughout the series. Beliefs about attractiveness and the stigma of skin conditions are furtherpropagated in this program. Reviewing the depictions of dermatology in Friends will aid in understanding the public’sideas and stereotypes regarding skin and dermatologic diseases.

Modeling Age-Friendly Environment, Active Aging, and Social Connectedness in an Emerging Asian Economy

Directory of Open Access Journals (Sweden)

Ming-Ming Lai

2016-01-01

Full Text Available This paper empirically tested eight key features of WHO guidelines to age-friendly community by surveying 211 informal caregivers and 402 self-care adults (aged 45 to 85 and above in Malaysia. We examined the associations of these eight features with active aging and social connectedness through exploratory and confirmatory factor analyses. A structural model with satisfactory goodness-of-fit indices (CMIN/df = 1.11, RMSEA = 0.02, NFI = 0.97, TLI = 1.00, CFI = 1.00, and GFI = 0.96 indicates that transportation and housing, community support and health services, and outdoor spaces and buildings are statistically significant in creating an age-friendly environment. We found a statistically significant positive relationship between an age-friendly environment and active aging. This relationship is mediated by social connectedness. The results indicate that built environments such as accessible public transportations and housing, affordable and accessible healthcare services, and elderly friendly outdoor spaces and buildings have to be put into place before social environment in building an age-friendly environment. Otherwise, the structural barriers would hinder social interactions for the aged. The removal of the environmental barriers and improved public transportation services provide short-term solutions to meet the varied and growing needs of the older population.

Primary Schools Eco-Friendly Education in the Frame of Education for Sustainable Development

Science.gov (United States)

Prabawani, Bulan; Hanika, Ita Musfirowati; Pradhanawati, Ari; Budiatmo, Agung

2017-01-01

A research on primary school education in the frame of education for sustainable development, as known as ESD, is important because the awareness of eco-friendly activities and environment empowerment cannot be developed in a short time. Meanwhile, human activities have caused significant environmental degradation. This is an exploratory study…

How to Make Financial Aid "Freshman-Friendly"

Science.gov (United States)

Pugh, Susan L.; Johnson, David B.

2011-01-01

Ultimately, making financial aid "freshman friendly" also makes financial aid "sophomore friendly," "junior friendly," and "senior friendly." Indiana University has in place an Office of Enrollment Management (OEM) model that includes focused financial aid packaging strategies complemented by unique contact…

TESPI (Tool for Environmental Sound Product Innovation): a simplified software tool to support environmentally conscious design in SMEs

Science.gov (United States)

Misceo, Monica; Buonamici, Roberto; Buttol, Patrizia; Naldesi, Luciano; Grimaldi, Filomena; Rinaldi, Caterina

2004-12-01

TESPI (Tool for Environmental Sound Product Innovation) is the prototype of a software tool developed within the framework of the "eLCA" project. The project, (www.elca.enea.it)financed by the European Commission, is realising "On line green tools and services for Small and Medium sized Enterprises (SMEs)". The implementation by SMEs of environmental product innovation (as fostered by the European Integrated Product Policy, IPP) needs specific adaptation to their economic model, their knowledge of production and management processes and their relationships with innovation and the environment. In particular, quality and costs are the main driving forces of innovation in European SMEs, and well known barriers exist to the adoption of an environmental approach in the product design. Starting from these considerations, the TESPI tool has been developed to support the first steps of product design taking into account both the quality and the environment. Two main issues have been considered: (i) classic Quality Function Deployment (QFD) can hardly be proposed to SMEs; (ii) the environmental aspects of the product life cycle need to be integrated with the quality approach. TESPI is a user friendly web-based tool, has a training approach and applies to modular products. Users are guided through the investigation of the quality aspects of their product (customer"s needs and requirements fulfilment) and the identification of the key environmental aspects in the product"s life cycle. A simplified check list allows analyzing the environmental performance of the product. Help is available for a better understanding of the analysis criteria. As a result, the significant aspects for the redesign of the product are identified.

Hydrogel-coated feed spacers in two-phase flow cleaning in spiral wound membrane elements: a novel platform for eco-friendly biofouling mitigation.

Science.gov (United States)

Wibisono, Yusuf; Yandi, Wetra; Golabi, Mohsen; Nugraha, Roni; Cornelissen, Emile R; Kemperman, Antoine J B; Ederth, Thomas; Nijmeijer, Kitty

2015-03-15

Biofouling is still a major challenge in the application of nanofiltration and reverse osmosis membranes. Here we present a platform approach for environmentally friendly biofouling control using a combination of a hydrogel-coated feed spacer and two-phase flow cleaning. Neutral (polyHEMA-co-PEG10MA), cationic (polyDMAEMA) and anionic (polySPMA) hydrogels have been successfully grafted onto polypropylene (PP) feed spacers via plasma-mediated UV-polymerization. These coatings maintained their chemical stability after 7 days incubation in neutral (pH 7), acidic (pH 5) and basic (pH 9) environments. Anti-biofouling properties of these coatings were evaluated by Escherichia coli attachment assay and nanofiltration experiments at a TMP of 600 kPag using tap water with additional nutrients as feed and by using optical coherence tomography. Especially the anionic polySPMA-coated PP feed spacer shows reduced attachment of E. coli and biofouling in the spacer-filled narrow channels resulting in delayed biofilm growth. Employing this highly hydrophilic coating during removal of biofouling by two-phase flow cleaning also showed enhanced cleaning efficiency, feed channel pressure drop and flux recoveries. The strong hydrophilic nature and the presence of negative charge on polySPMA are most probably responsible for the improved antifouling behavior. A combination of polySPMA-coated PP feed spacers and two-phase flow cleaning therefore is promising and an environmentally friendly approach to control biofouling in NF/RO systems employing spiral-wound membrane modules. Copyright © 2015 Elsevier Ltd. All rights reserved.

Environmental compliance audits of electric generating facilities - a practical approach

International Nuclear Information System (INIS)

Staker, R.D.

1992-01-01

As environmental regulations expand in complexity and number, and as regulatory agencies place more emphasis on enforcing regulations, it is increasingly important that electric utilities perform periodic environmental compliance audits to determine if their facilities are in compliance with federal, state, and local environmental regulations. Explicit commitment by the utility's top management and careful planning and execution of an audit are key elements in the effectiveness of an audit. This paper is directed to electric utility environmental managers and company management. The paper presents a practical approach for planning and performing a multi-media environmental compliance of an electric generating facility

[Collective health, territorial and environmental conflicts: bases for a critical socio-environmental approach].

Science.gov (United States)

Porto, Marcelo Firpo de Souza; da Rocha, Diogo Ferreira; Finamore, Renan

2014-10-01

The phenomenon of globalization and the increase in neo-extractivism in the global periphery intensify the search for new territories and natural resources for the economy, resulting in significant impacts on ecosystems and on the lives of vulnerable populations. It is considered that the environmental crisis imposes new challenges and requires an updating of the theoretical and methodological foundations of collective health and the social determinants of health. The scope of this paper is to present theoretical contributions to the construction of a critical socio-environmental approach from a review of the literature structured around previous work on the mapping of environmental conflicts, and conducting empirical studies in conflicting areas. The contributions of sociology, political ecology, postcolonial studies and geography is summarized for the discussion of the socio-environmental determinants of health, as well as experiences that integrate emancipatory knowledge, political subjects, resistances and alternatives for society.

Wine consumers’ environmental knowledge and attitudes: Influence on willingness to purchase

Directory of Open Access Journals (Sweden)

Nelson Barber

2009-02-01

Full Text Available Nelson Barber1, Christopher Taylor2, Sandy Strick31College of Human Sciences, Box 41240 Texas Tech University, Lubbock, TX, USA; 2School of Business, Eastern New Mexico University, Portales, NM, USA; 3School of Hotel, Restaurant, and Tourism Management, University of South Carolina, Columbia, SC, USAAbstract: The last two decades have witnessed a dramatic increase in environmental consciousness worldwide. Consumers are now changing their behavior to integrate environmental considerations into lifestyle choices. This change includes consumers’ purchasing decisions based upon how well products satisfy their needs and how these products affect the natural environment. In some cases, consumers are willing to pay a premium for environmentally friendly products. Marketing professes to serve the benefit of the public by informing them of the availability of goods and services that will advance their quality of life. However, this is only true if marketing’s communication approach and methods of promotion aid in informing, educating, and channeling the needs of current and future consumers toward “green” products and services. Using wine as the product, the purpose of this study is to determine the relationship of a consumer’s involvement with a product and the environment, their knowledge of environmental issues and attitudes toward the environment, and their willingness to purchase the product. The results suggest personality segmentation, through selective marketing and redirecting of consumers needs and wants toward environmentally friendly wine products. For example, what wine consumers actually know about environmental wine issues is associated with their involvement with environmental issues more than what they self-assess they know about wine.Keywords: environmental knowledge, green products, wine

The importance of perceived care and connectedness with friends and parents for adolescent social anxiety.

Science.gov (United States)

Van Zalk, Nejra; Van Zalk, Maarten

2015-06-01

Nonclinical social anxiety in adolescence can be highly problematic, as it likely affects current and especially new social interactions. Relationships with significant others, such as close friends, mothers, and fathers, could aid socially anxious adolescents' participation in social situations, thereby helping reduce feelings of social anxiety. We examined whether making friends as well as high friendship quality help reduce social anxiety over time, and whether friends', mothers', and fathers' care interact in reducing social anxiety. Using longitudinal data from 2,194 participants in a social network (48% girls; Mage  = 13.58) followed for 3 years, we estimated friendship selection and influence processes via a continuous time-modeling approach using SIENA. We controlled for the effects of depressive symptoms, self-esteem, gender, age, and family structure. Our findings suggest that perceived care by friends mediated the effect of making friends on social anxiety. Perceptions of mother and father, as well as friend care and connectedness, respectively, did not interact in decreasing social anxiety. Nonetheless, care and connectedness with mothers, fathers, and friends jointly predicted decreases in social anxiety. Caring relationships with friends and parents each play a role in mutually protecting early adolescents against increasing in social anxiety over time. © 2014 Wiley Periodicals, Inc.

A dialogue-centric approach to environmental-remediation decision-making - 59115

International Nuclear Information System (INIS)

Boucher, Laurel; Clark, James F.

2012-01-01

This paper outlines a multi-step approach to streamline and enhance the decision-making process that guides environmental remediation. The inability of the responsible party and the various stakeholders to reach agreement on the remediation plan can delay the remediation, result in financial penalties, and lead to the development of an adversarial stance that inhibits the ability of the parties to work together in a creative and constructive manner. The approach presented by the authors is designed to expand dialogue in a way that moves it beyond technical or fiscal matters by addressing what the authors describe as the 'hidden barriers' to productive dialogue. These 'hidden barriers' include: self-interests, the perception as to how people are being treated, a lack of clarity or poor management of responsibilities and accountabilities, unclear or convoluted communication protocols, and an underlying tone of conflict and cynicism. A key element of the multi-step approach outlined in this paper is the process of uncovering these 'hidden barriers' and addressing them in a way that turns discourse into collaboration. The paper describes a model the authors have used to streamline and enhance the process of creating sustainable agreements both for the U.S. Department of Energy's Office of Environmental Management as well as the U.S. Department of Defense for a variety of environmental remediation projects. The results of this approach include the acceleration of an environmental clean-up from a projected 19 years to 11 years, the development of innovative technical strategies, the reduction of a major backlog of environmental proposals requiring review and comment, and the distinction accorded one group of being recognized as a model of effective partnering. The approach described has widespread implications not only because its use can be expanded to include a multitude of decision-making applications but also because of the impact it creates by expanding both the

Fermilab Friends for Science Education | Welcome

Science.gov (United States)

Fermilab Friends for Science Education FFSE Home About Us Join Us Support Us Contact Us Fermilab Friends for Science Education photo Fermilab Friends for Science Education supports innovative science education programs at Fermilab. Its mission is to: Enhance the quality of precollege science education in

A dynamic multimedia fuzzy-stochastic integrated environmental risk assessment approach for contaminated sites management

Energy Technology Data Exchange (ETDEWEB)

Hu, Yan; Wen, Jing-ya; Li, Xiao-li; Wang, Da-zhou; Li, Yu, E-mail: liyuxx8@hotmail.com

2013-10-15

Highlights: • Using interval mathematics to describe spatial and temporal variability and parameter uncertainty. • Using fuzzy theory to quantify variability of environmental guideline values. • Using probabilistic approach to integrate interval concentrations and fuzzy environmental guideline. • Establishment of dynamic multimedia environmental integrated risk assessment framework. -- Abstract: A dynamic multimedia fuzzy-stochastic integrated environmental risk assessment approach was developed for contaminated sites management. The contaminant concentrations were simulated by a validated interval dynamic multimedia fugacity model, and different guideline values for the same contaminant were represented as a fuzzy environmental guideline. Then, the probability of violating environmental guideline (Pv) can be determined by comparison between the modeled concentrations and the fuzzy environmental guideline, and the constructed relationship between the Pvs and environmental risk levels was used to assess the environmental risk level. The developed approach was applied to assess the integrated environmental risk at a case study site in China, simulated from 1985 to 2020. Four scenarios were analyzed, including “residential land” and “industrial land” environmental guidelines under “strict” and “loose” strictness. It was found that PAH concentrations will increase steadily over time, with soil found to be the dominant sink. Source emission in soil was the leading input and atmospheric sedimentation was the dominant transfer process. The integrated environmental risks primarily resulted from petroleum spills and coke ovens, while the soil environmental risks came from coal combustion. The developed approach offers an effective tool for quantifying variability and uncertainty in the dynamic multimedia integrated environmental risk assessment and the contaminated site management.

A dynamic multimedia fuzzy-stochastic integrated environmental risk assessment approach for contaminated sites management

International Nuclear Information System (INIS)

Hu, Yan; Wen, Jing-ya; Li, Xiao-li; Wang, Da-zhou; Li, Yu

2013-01-01

Highlights: • Using interval mathematics to describe spatial and temporal variability and parameter uncertainty. • Using fuzzy theory to quantify variability of environmental guideline values. • Using probabilistic approach to integrate interval concentrations and fuzzy environmental guideline. • Establishment of dynamic multimedia environmental integrated risk assessment framework. -- Abstract: A dynamic multimedia fuzzy-stochastic integrated environmental risk assessment approach was developed for contaminated sites management. The contaminant concentrations were simulated by a validated interval dynamic multimedia fugacity model, and different guideline values for the same contaminant were represented as a fuzzy environmental guideline. Then, the probability of violating environmental guideline (Pv) can be determined by comparison between the modeled concentrations and the fuzzy environmental guideline, and the constructed relationship between the Pvs and environmental risk levels was used to assess the environmental risk level. The developed approach was applied to assess the integrated environmental risk at a case study site in China, simulated from 1985 to 2020. Four scenarios were analyzed, including “residential land” and “industrial land” environmental guidelines under “strict” and “loose” strictness. It was found that PAH concentrations will increase steadily over time, with soil found to be the dominant sink. Source emission in soil was the leading input and atmospheric sedimentation was the dominant transfer process. The integrated environmental risks primarily resulted from petroleum spills and coke ovens, while the soil environmental risks came from coal combustion. The developed approach offers an effective tool for quantifying variability and uncertainty in the dynamic multimedia integrated environmental risk assessment and the contaminated site management

Environmentally friendly, high-performance generation

International Nuclear Information System (INIS)

Kalmari, A.

2003-01-01

The project developer, owner, and operator of the new 45 MWth BFB-based cogeneration plant in Iisalmi is Termia Oy, part of the Atro Group (formerly Savon Voima Oy). Fired on peat and wood waste and handed over to the customer in November 2002, the plant's electrical output is sold to the parent company and heat locally to customers in Iisalmi. When the construction decision was made, one of the main objectives was to utilise as high a level of indigenous fuels (peat and biomass) as possible, at a high level of efficiency. An environmental impact analysis was carried out, taking into account the impact of various fuels and emissions in terms of combustion and logistics. One main benefit of the type of plant ultimately selected was that the bulk of the fuel can be supplied from the surrounding area. This is very important in terms of fuel supply security and local employment. The government provided a EUR 2.7 million grant for the project, equivalent to 13% of the total EUR 21 million investment budget. Before the plant was built, Termia used approximately 95 GWh of indigenous fuels annually. Today, this figure is 220 GWh. The main fuel used is milled peat. Up to 30% green chips from logging residues can be used. Recycled waste fuel can cover up to 3% of the total fuel requirement

Gender Norms and Institutional Culture: The Family-Friendly versus the Father-Friendly University

Science.gov (United States)

Sallee, Margaret W.

2013-01-01

This article investigates the role that gender norms and expectations about parenting play in establishing the family-friendly versus the father-friendly university. Using interviews with 51 male faculty at three research universities, the article considers how faculty and administrators' actions perpetuate cultures that promote or hinder…

Green hypocrisy? Environmental attitudes and residential space heating expenditure

Energy Technology Data Exchange (ETDEWEB)

Traynor, Laura; Lange, Ian; Moro, Mirko [Stirling Univ. (United Kingdom). Division of Economics

2012-06-15

In the UK, the largest proportion of household energy use is for space heating. Popular media make claims of a green hypocrisy: groups which have the strongest attitude towards the environment have the highest emissions. This study examines whether environmental attitudes and behaviours are associated with space heating energy use using data from the British Household Panel Survey. Results find that environmentally friendly attitudes generally do not lead to lower heating expenditures though environmentally friendly behaviours are associated with lower heating expenditure. Also, the effect of these attitudes and behaviours do not change as income increase.

Conceptualizing age-friendly community characteristics in a sample of urban elders: an exploratory factor analysis.

Science.gov (United States)

Smith, Richard J; Lehning, Amanda J; Dunkle, Ruth E

2013-01-01

Accurate conceptualization and measurement of age-friendly community characteristics would help to reduce barriers to documenting the effects on elders of interventions to create such communities. This article contributes to the measurement of age-friendly communities through an exploratory factor analysis of items reflecting an existing US Environmental Protection Agency policy framework. From a sample of urban elders (n = 1,376), we identified 6 factors associated with demographic and health characteristics: access to business and leisure, social interaction, access to health care, neighborhood problems, social support, and community engagement. Future research should explore the effects of these factors across contexts and populations.

MOIRA Software Framework - Integrated User-friendly Shell for The Environmental Decision Support Systems

International Nuclear Information System (INIS)

Hofman, Dmitry; Nordlinder, Sture

2003-01-01

MOIRA DSS is a model-based computerised system for the identification of optimal remedial strategies to restore radionuclide contaminated fresh water environment The examples of the questions which decision-maker could address to the system are 'Is lake liming effective in reducing the radiocesium uptake by fish?', C an control of catchment run-off be an effective measure against further redistribution of radionuclides by river?', 'Is sediment removal worthwhile to reduce further contamination of the aquatic environment?'. The MOIRA system could help decision-maker to avoid implementation of inappropriate and expensive countermeasures. MOIRA gives the possibility to predict effeas of implementation of different types of the countermeasures and evaluate both 'ecological' and 'social' effect of the countermeasures. Decision support process using MOIRA DSS can be subdivided to the following steps: Definition of the site-specific environmental and socio-economic parameters using GIS-based data. Unknown site-specific data could be estimated using GIS-based models, default data for the socio-economic parameters, data directly provided by user. Providing data about fallout of the radionuclides. Definition of the time interval for which prognosis will be made. Definition of the alternative strategies of the countermeasures. Evaluation of the sequences of the implementation of the user-defined strategies and 'no actions' strategy using predictive models. Ranking strategies using Multi-Attribute Analysis Module (MAA) Preparation of the recommendations in the form of report. This process requires usage of several computerised tools such as predictive models, multi-attribute analysis software, geographical information system, data base. MOIRA software framework could be used as the basis for the creation of the wide range of the user-friendly and easy-to-learn decision support systems. It can also provide the advanced graphical user interface and data checking system for the

Biodegradable and bio-based polymers: future prospects of eco-friendly plastics.

Science.gov (United States)

Iwata, Tadahisa

2015-03-09

Currently used plastics are mostly produced from petrochemical products, but there is a growing demand for eco-friendly plastics. The use of bio-based plastics, which are produced from renewable resources, and biodegradable plastics, which are degraded in the environment, will lead to a more sustainable society and help us solve global environmental and waste management problems. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Advanced Environment Friendly Nanotechnologies

Science.gov (United States)

Figovsky, O.; Beilin, D.; Blank, N.

The economic, security, military and environmental implications of molecular manufacturing are extreme. Unfortunately, conflicting definitions of nanotechnology and blurry distinctions between significantly different fields have complicated the effort to understand those differences and to develop sensible, effective policy for each. The risks of today's nanoscale technologies cannot be treated the same as the risks of longer-term molecular manufacturing. It is a mistake to put them together in one basket for policy consideration — each is important to address, but they offer different problems and will require far different solutions. As used today, the term nanotechnology usually refers to a broad collection of mostly disconnected fields. Essentially, anything sufficiently small and interesting can be called nanotechnology. Much of it is harmless. For the rest, much of the harm is of familiar and limited quality. Molecular manufacturing, by contrast, will bring unfamiliar risks and new classes of problems. The advanced environment friendly nanotechnologies elaborated by Israel Company Polymate Ltd. — International Research Center are illustrated.

Environmentally friendly hybrid coatings for corrosion protection: silane based pre-treatments and nanostructured waterborne coatings

OpenAIRE

Fedel, Michele

2009-01-01

This thesis considers a nanotechnology approach based on the production of metals pre-treatments and organic coatings (a complete protection system at all) designed from the nanoscale. The final aim is to develop protection systems with improved corrosion protection properties and a low environmental impact. In particular, multifunctional silane hybrid molecules were used to design sol-gel pre-treatments for metals and to modify the inner structure of UV curable waterborne organic coatings...

Economic evaluation of environmental impacts of open cast mining project - an approach

International Nuclear Information System (INIS)

Maiti, S.K.; Pathak, K.

1998-01-01

Economic valuation of environmental attributes are pragmatic approach to evaluating the impacts and it helps decision makers to arrive at objective decisions on the basis of cost benefit ratio. For determining the physical impact and its quantification, four evaluation methods, namely-market price method, surrogate market price, survey based and cost based approaches are generally used. The present paper reviews the importance of environmental evaluation of impacts of mining and also reviews a few suitable methodologies that could be effectively used for economic evaluation of environmental impacts in open cast mining projects. (author)

Structure Study of Cellulose Fibers Wet-Spun from Environmentally Friendly NaOH/Urea Aqueous Solutions

Energy Technology Data Exchange (ETDEWEB)

Chen,X.; Burger, C.; Wan, F.; Zhang, J.; Rong, L.; Hsiao, B.; Chu, B.; Cai, J.; Zhang, L.

2007-01-01

In this study, structure changes of regenerated cellulose fibers wet-spun from a cotton linter pulp (degree of polymerization {approx}620) solution in an NaOH/urea solvent under different conditions were investigated by simultaneous synchrotron wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS). WAXD results indicated that the increase in flow rate during spinning produced a better crystal orientation and a higher degree of crystallinity, whereas a 2-fold increase in draw ratio only affected the crystal orientation. When coagulated in a H{sub 2}SO{sub 4}/Na{sub 2}SO{sub 4} aqueous solution at 15 {sup o}C, the regenerated fibers exhibited the highest crystallinity and a crystal orientation comparable to that of commercial rayon fibers by the viscose method. SAXS patterns exhibited a pair of meridional maxima in all regenerated cellulose fibers, indicating the existence of a lamellar structure. A fibrillar superstructure was observed only at higher flow rates (>20 m/min). The conformation of cellulose molecules in NaOH/urea aqueous solution was also investigated by static and dynamic light scattering. It was found that cellulose chains formed aggregates with a radius of gyration, R{sub g}, of about 232 nm and an apparent hydrodynamic radius, R{sub h}, of about 172 nm. The NaOH/urea solvent system is low-cost and environmentally friendly, which may offer an alternative route to replace more hazardous existing methods for the production of regenerated cellulose fibers.

A Lifecycle Knowledge Management Approach to Support Decommissioning and Environmental Remediation Projects

International Nuclear Information System (INIS)

Borrmann, F.; Booth, P.

2016-01-01

Full text: KM is a discipline that has a long tradition in nuclear. Nevertheless, the necessity for and the specifics of KM in decommissioning and environmental remediation have come into focus but quite recently. On one hand driven by major decommissioning programs like the NDA approach in UK or the phase-out decision in Germany, on the other hand as a request from decommissioning practitioners. In this paper we would like to emphasize the necessity to develop lifecycle wide KM approaches and specific tools for KM in decommissioning and environmental remediation. Additionally, KM approaches must be adapted to the phases of the facilities lifecycle. Especially decommissioning and environmental remediation require different KM systems to cope with a quickly changing environment. (author

Modern environmental and economic approach of mining industry

Directory of Open Access Journals (Sweden)

Carsten Drebenstedt

2013-03-01

Full Text Available In the article, the need of transition to the rational subsoil use (the alternative mining approach is proved, which unlike general one supposes the increasing of extraction rate of valuable components in the deposit and multiple use of raw materials, the maximizing recycling, the decreasing of land occupation, the increasing of the development period of deposit at some income decrease up to the moderate level, which is enough to provide the attraction for investors. The multicriteriality is considered as the crucial principle of rational subsoil use at taking management decisions, i.e. the considering of ecological, economic and social targets, aimed at receiving moderate profit at proper social and environmental standards. The graphic representation of models of the general mining approach and the alternative one allows to emphasize the specified advantages of transition to rational subsoil resources development and reflect them in design equation. In the paper, three performance strategies providing the implementation of the alternative approach are offered: full-field development, application ecologically and economically effective systems and the development processes, consideration of reclamation and minimization of long term environmental effects of mining

Friends of the Earth case against the PWR

International Nuclear Information System (INIS)

Boyle, S.

1987-01-01

Friends of the Earth's case against Sizewell B has been summarised in a report entitled 'Critical Decision: Should Britain buy the Pressurised Water Reactor?'. This showed that on economic and safety grounds, Sizewell B would not be a good choice for the electricity consumer or the country at large. Events since the end of the Inquiry, particularly those affecting the economic case, have confirmed this conclusion. This paper will summarise the case, both during the Inquiry and subsequent to this, as well as make reference to the long-term environmental implications of the Central Electricity Generating Board's PWR programme. (author)

Best friends' interactions and substance use: The role of friend pressure and unsupervised co-deviancy.

Science.gov (United States)

Tsakpinoglou, Florence; Poulin, François

2017-10-01

Best friends exert a substantial influence on rising alcohol and marijuana use during adolescence. Two mechanisms occurring within friendship - friend pressure and unsupervised co-deviancy - may partially capture the way friends influence one another. The current study aims to: (1) examine the psychometric properties of a new instrument designed to assess pressure from a youth's best friend and unsupervised co-deviancy; (2) investigate the relative contribution of these processes to alcohol and marijuana use; and (3) determine whether gender moderates these associations. Data were collected through self-report questionnaires completed by 294 Canadian youths (62% female) across two time points (ages 15-16). Principal component analysis yielded a two-factor solution corresponding to friend pressure and unsupervised co-deviancy. Logistic regressions subsequently showed that unsupervised co-deviancy was predictive of an increase in marijuana use one year later. Neither process predicted an increase in alcohol use. Results did not differ as a function of gender. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

[Environmental approaches in the prevention of obesity in children and adolescents].

Science.gov (United States)

Loss, J; Leitzmann, M

2011-03-01

This article aims to provide a structured review of how to create settings and environments that prevent the development of childhood overweight and obesity. It also describes which institutions and levels are responsible for environmental (global) approaches in obesity prevention and which evidence exists in terms of process and outcomes of different preventive measures. Environmental approaches in disease prevention deal with social and technical-material conditions of daily living, as those conditions significantly influence health behavior. Strategies that focus on the obesogenic environment are considered increasingly important in the prevention of obesity in children and adolescents. They can be applied at different levels (e.g., schools, communities). These interventions should aim to improve the availability of healthy foods and physical activity facilities, e.g., by provision of healthy meals and foods in schools, restaurants, and stores and by price reductions of healthy foods. Physical activity can be supported by creating attractive green spaces and playgrounds in schools and cities, improving sidewalk networks and a supportive pedestrian environment, and implementing walk-to-school projects. On a national level, policies and legislation can support changes in the social and situational environments, e.g., relating to catering in schools or TV advertisement. The practice of environmental approaches is complex, because many stakeholders from different sectors have to be involved. This may account for the observation that environmental approaches are currently underrepresented in obesity prevention.

A Canadian perspective on environmental issues

International Nuclear Information System (INIS)

Emmett, B.

1993-01-01

The leading environmental concerns in Canada are acid rain, ozone depletion, toxic substances, climate change, and biodiversity. These concerns have a number of elements in common, including a need for international actions for their solution, a high degree of scientific complexity, long life cycles from a policy point of view, and large differences in priorities between developing and developed countries. Canadians have favorable attitudes toward sustainable development and expect government and industry to be active in protecting the environment. Canadians also demand and expect a secure supply of competitively priced energy. Although industry may be concerned that incorporating environmental considerations into their business may impede competitiveness, this view is shown to be unsound for the following reasons: productivity is closely linked to a healthy environment; pollution prevention is less costly than cleanup; environmental protection can create new business opportunities; and the market is demanding more environmentally friendly industries. In the energy sector, a number of successful initiatives are under way to integrate environmental considerations into their decision making. The challenge is for industries to go beyond individual activities and build a case for sustainable energy development. The role of government includes informing Canadians about environmental risks and government priorities, ensuring that environmental assessment rules are clear and fair, streamlining regulatory processes, and using a balanced mix of legislation and regulation with market-based approaches to environmental protection

Environmental risk concern and preferences for energy-saving measures

NARCIS (Netherlands)

Poortinga, W; Steg, L.; Vlek, C.A.J.

It is often assumed that higher environmental concern goes with more positive attitudes toward environmental management strategies and more environmentally friendly behavior. Cultural theory argues this relationship is more complex. Cultural theory distinguishes four ways of life, involving distinct

Multi-Contextual Segregation and Environmental Justice Research: Toward Fine-Scale Spatiotemporal Approaches.

Science.gov (United States)

Park, Yoo Min; Kwan, Mei-Po

2017-10-10

Many environmental justice studies have sought to examine the effect of residential segregation on unequal exposure to environmental factors among different social groups, but little is known about how segregation in non-residential contexts affects such disparity. Based on a review of the relevant literature, this paper discusses the limitations of traditional residence-based approaches in examining the association between socioeconomic or racial/ethnic segregation and unequal environmental exposure in environmental justice research. It emphasizes that future research needs to go beyond residential segregation by considering the full spectrum of segregation experienced by people in various geographic and temporal contexts of everyday life. Along with this comprehensive understanding of segregation, the paper also highlights the importance of assessing environmental exposure at a high spatiotemporal resolution in environmental justice research. The successful integration of a comprehensive concept of segregation, high-resolution data and fine-grained spatiotemporal approaches to assessing segregation and environmental exposure would provide more nuanced and robust findings on the associations between segregation and disparities in environmental exposure and their health impacts. Moreover, it would also contribute to significantly expanding the scope of environmental justice research.

Multi-Contextual Segregation and Environmental Justice Research: Toward Fine-Scale Spatiotemporal Approaches

Directory of Open Access Journals (Sweden)

Yoo Min Park

2017-10-01

Full Text Available Many environmental justice studies have sought to examine the effect of residential segregation on unequal exposure to environmental factors among different social groups, but little is known about how segregation in non-residential contexts affects such disparity. Based on a review of the relevant literature, this paper discusses the limitations of traditional residence-based approaches in examining the association between socioeconomic or racial/ethnic segregation and unequal environmental exposure in environmental justice research. It emphasizes that future research needs to go beyond residential segregation by considering the full spectrum of segregation experienced by people in various geographic and temporal contexts of everyday life. Along with this comprehensive understanding of segregation, the paper also highlights the importance of assessing environmental exposure at a high spatiotemporal resolution in environmental justice research. The successful integration of a comprehensive concept of segregation, high-resolution data and fine-grained spatiotemporal approaches to assessing segregation and environmental exposure would provide more nuanced and robust findings on the associations between segregation and disparities in environmental exposure and their health impacts. Moreover, it would also contribute to significantly expanding the scope of environmental justice research.

Genetic and environmental sources of individual religiousness: the roles of individual personality traits and perceived environmental religiousness.

Science.gov (United States)

Kandler, Christian; Riemann, Rainer

2013-07-01

In the current study, we examined the genetic and environmental sources of the links between individual religiousness and individual personality traits, perceived parental religiousness, and perceived peer religiousness. Data from 870 individuals (incl. 394 twin pairs) were analyzed. Variance in individual religiousness was significantly influenced by genetic effects, environmental influences shared by twins reared together, and individual-specific environmental influences. Individual religiousness showed significant associations with age, sex, specific personality traits (e.g., agreeableness, openness to values), and perceived religiousness of important social interaction partners, such as parents, best friends, and spouses. The links to personality traits were relatively small and primarily genetically mediated. The associations between individual religiousness and parental religiousness were substantial and mediated by shared environmental effects. These links significantly decreased across age accompanying a significant decrease of shared environmental influences on individual religiousness. The correlations between individual religiousness and perceived religiousness of spouses and best friends were relatively moderate but increased with age. These associations were mediated by genetic as well as nonshared environmental sources accompanying an increase of nonshared environmental influences on individual religiousness with age. The results suggest that inter-individual differences in religiousness are due to multiple sources.

Environmental accounting of eco-innovations through environmental input-output analysis : The case of hydrogen and fuel cells buses

NARCIS (Netherlands)

Cantono, Simona; Heijungs, Reinout; Kleijn, Réne

The introduction of environmentally friendly innovations in both transport and energy sectors are included in the list of priorities of the European Union political agenda. This paper investigates the environmental consequences of the introduction of hydrogen and fuel cells technology in the

Waste minimization through process optimization/integration and resource management at eco-friendly Heavy Water Plants

International Nuclear Information System (INIS)

Nageshri, Jagdish; Gupta, S.K.

2004-01-01

Heavy Water Board has celebrated 2003 as Environmental Conservation Year captivating a range of enviro-friendly measures. This article attempts to give a brief overview of the outcome of systems and adapted procedures for waste minimization through process integration and resource management at Heavy Water Plants

Cyber Friendly Fire

Energy Technology Data Exchange (ETDEWEB)

Greitzer, Frank L.; Carroll, Thomas E.; Roberts, Adam D.

2011-09-01

Cyber friendly fire (FF) is a new concept that has been brought to the attention of Department of Defense (DoD) stakeholders through two workshops that were planned and conducted by the Air Force Research Laboratory (AFRL) and research conducted for AFRL by the Pacific Northwest National Laboratory. With this previous work in mind, we offer a definition of cyber FF as intentional offensive or defensive cyber/electronic actions intended to protect cyber systems against enemy forces or to attack enemy cyber systems, which unintentionally harms the mission effectiveness of friendly or neutral forces. Just as with combat friendly fire, a fundamental need in avoiding cyber FF is to maintain situation awareness (SA). We suggest that cyber SA concerns knowledge of a system's topology (connectedness and relationships of the nodes in a system), and critical knowledge elements such as the characteristics and vulnerabilities of the components that comprise the system (and that populate the nodes), the nature of the activities or work performed, and the available defensive (and offensive) countermeasures that may be applied to thwart network attacks. A training implication is to raise awareness and understanding of these critical knowledge units; an approach to decision aids and/or visualizations is to focus on supporting these critical knowledge units. To study cyber FF, we developed an unclassified security test range comprising a combination of virtual and physical devices that present a closed network for testing, simulation, and evaluation. This network offers services found on a production network without the associated costs of a real production network. Containing enough detail to appear realistic, this virtual and physical environment can be customized to represent different configurations. For our purposes, the test range was configured to appear as an Internet-connected Managed Service Provider (MSP) offering specialized web applications to the general public

OS Friendly Microprocessor Architecture

Science.gov (United States)

2017-04-01

NOTES Patrick La Fratta is now affiliated with Micron Technology, Inc., Boise, Idaho. 14. ABSTRACT We present an introduction to the patented ...Operating System Friendly Microprocessor Architecture (OSFA). The software framework to support the hardware-level security features is currently patent ...Army is assignee. OS Friendly Microprocessor Architecture. United States Patent 9122610. 2015 Sep. 2. Jungwirth P, inventor; US Army is assignee

Environmental costs and resource planning consequences: New England electric's rating and weighting approach

International Nuclear Information System (INIS)

Destribats, A.F.; Hutchinson, M.A.; Stout, T.M.; White, D.S.

1990-01-01

In mid 1989, the New England Electric System (NEES or Company) began an effort to reflect the potential environmental externalities of new resources in its long range planning process. Having examined several methods for incorporating externalities, including cost of control, the Company adopted a rating and weighting approach. Not strictly quantitative nor qualitative, the rating and weighting approach provided a means to apply an environmental score to all new resources considered for the Company's long range resource plan, NEESPLAN 1990. A maximum environmental cost penalty of fifteen percent was applied to the resource considered for inclusion in the plan that posed the highest amount of potential environmental degradation. All other resources received a smaller penalty that was based on the ratio of their environmental score to the highest score. Application of this penalty tended to improve the cost-effectiveness of demand-side programs and worsen some supply-side options' cost-effectiveness. Both the rating and weighting approach employed by NEES and its application in the long range planning process have been the subject of several critical reviews. Having stated that the advantages of the rating and weighting approach include its easy reviewability and flexibility to be modified as better information becomes available, the Company has subsequently revised the approach to address the comments made by reviewers. The purpose of this paper is to describe the rating and weighting approach, its recent revisions, and the effect of the revised methodology on the Company's long range resource plan

Eco-friendly Energy Storage System: Seawater and Ionic Liquid Electrolyte.

Science.gov (United States)

Kim, Jae-Kwang; Mueller, Franziska; Kim, Hyojin; Jeong, Sangsik; Park, Jeong-Sun; Passerini, Stefano; Kim, Youngsik

2016-01-08

As existing battery technologies struggle to meet the requirements for widespread use in the field of large-scale energy storage, novel concepts are urgently needed concerning batteries that have high energy densities, low costs, and high levels of safety. Here, a novel eco-friendly energy storage system (ESS) using seawater and an ionic liquid is proposed for the first time; this represents an intermediate system between a battery and a fuel cell, and is accordingly referred to as a hybrid rechargeable cell. Compared to conventional organic electrolytes, the ionic liquid electrolyte significantly enhances the cycle performance of the seawater hybrid rechargeable system, acting as a very stable interface layer between the Sn-C (Na storage) anode and the NASICON (Na3 Zr2 Si2 PO12) ceramic solid electrolyte, making this system extremely promising for cost-efficient and environmentally friendly large-scale energy storage. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Real-time fMRI pattern decoding and neurofeedback using FRIEND: an FSL-integrated BCI toolbox.

Science.gov (United States)

Sato, João R; Basilio, Rodrigo; Paiva, Fernando F; Garrido, Griselda J; Bramati, Ivanei E; Bado, Patricia; Tovar-Moll, Fernanda; Zahn, Roland; Moll, Jorge

2013-01-01

The demonstration that humans can learn to modulate their own brain activity based on feedback of neurophysiological signals opened up exciting opportunities for fundamental and applied neuroscience. Although EEG-based neurofeedback has been long employed both in experimental and clinical investigation, functional MRI (fMRI)-based neurofeedback emerged as a promising method, given its superior spatial resolution and ability to gauge deep cortical and subcortical brain regions. In combination with improved computational approaches, such as pattern recognition analysis (e.g., Support Vector Machines, SVM), fMRI neurofeedback and brain decoding represent key innovations in the field of neuromodulation and functional plasticity. Expansion in this field and its applications critically depend on the existence of freely available, integrated and user-friendly tools for the neuroimaging research community. Here, we introduce FRIEND, a graphic-oriented user-friendly interface package for fMRI neurofeedback and real-time multivoxel pattern decoding. The package integrates routines for image preprocessing in real-time, ROI-based feedback (single-ROI BOLD level and functional connectivity) and brain decoding-based feedback using SVM. FRIEND delivers an intuitive graphic interface with flexible processing pipelines involving optimized procedures embedding widely validated packages, such as FSL and libSVM. In addition, a user-defined visual neurofeedback module allows users to easily design and run fMRI neurofeedback experiments using ROI-based or multivariate classification approaches. FRIEND is open-source and free for non-commercial use. Processing tutorials and extensive documentation are available.

Real-time fMRI pattern decoding and neurofeedback using FRIEND: an FSL-integrated BCI toolbox.

Directory of Open Access Journals (Sweden)

João R Sato

Full Text Available The demonstration that humans can learn to modulate their own brain activity based on feedback of neurophysiological signals opened up exciting opportunities for fundamental and applied neuroscience. Although EEG-based neurofeedback has been long employed both in experimental and clinical investigation, functional MRI (fMRI-based neurofeedback emerged as a promising method, given its superior spatial resolution and ability to gauge deep cortical and subcortical brain regions. In combination with improved computational approaches, such as pattern recognition analysis (e.g., Support Vector Machines, SVM, fMRI neurofeedback and brain decoding represent key innovations in the field of neuromodulation and functional plasticity. Expansion in this field and its applications critically depend on the existence of freely available, integrated and user-friendly tools for the neuroimaging research community. Here, we introduce FRIEND, a graphic-oriented user-friendly interface package for fMRI neurofeedback and real-time multivoxel pattern decoding. The package integrates routines for image preprocessing in real-time, ROI-based feedback (single-ROI BOLD level and functional connectivity and brain decoding-based feedback using SVM. FRIEND delivers an intuitive graphic interface with flexible processing pipelines involving optimized procedures embedding widely validated packages, such as FSL and libSVM. In addition, a user-defined visual neurofeedback module allows users to easily design and run fMRI neurofeedback experiments using ROI-based or multivariate classification approaches. FRIEND is open-source and free for non-commercial use. Processing tutorials and extensive documentation are available.

Real-Time fMRI Pattern Decoding and Neurofeedback Using FRIEND: An FSL-Integrated BCI Toolbox

Science.gov (United States)

Sato, João R.; Basilio, Rodrigo; Paiva, Fernando F.; Garrido, Griselda J.; Bramati, Ivanei E.; Bado, Patricia; Tovar-Moll, Fernanda; Zahn, Roland; Moll, Jorge

2013-01-01

The demonstration that humans can learn to modulate their own brain activity based on feedback of neurophysiological signals opened up exciting opportunities for fundamental and applied neuroscience. Although EEG-based neurofeedback has been long employed both in experimental and clinical investigation, functional MRI (fMRI)-based neurofeedback emerged as a promising method, given its superior spatial resolution and ability to gauge deep cortical and subcortical brain regions. In combination with improved computational approaches, such as pattern recognition analysis (e.g., Support Vector Machines, SVM), fMRI neurofeedback and brain decoding represent key innovations in the field of neuromodulation and functional plasticity. Expansion in this field and its applications critically depend on the existence of freely available, integrated and user-friendly tools for the neuroimaging research community. Here, we introduce FRIEND, a graphic-oriented user-friendly interface package for fMRI neurofeedback and real-time multivoxel pattern decoding. The package integrates routines for image preprocessing in real-time, ROI-based feedback (single-ROI BOLD level and functional connectivity) and brain decoding-based feedback using SVM. FRIEND delivers an intuitive graphic interface with flexible processing pipelines involving optimized procedures embedding widely validated packages, such as FSL and libSVM. In addition, a user-defined visual neurofeedback module allows users to easily design and run fMRI neurofeedback experiments using ROI-based or multivariate classification approaches. FRIEND is open-source and free for non-commercial use. Processing tutorials and extensive documentation are available. PMID:24312569

Participatory approaches for environmental governance: theoretical justifications and practical effects

International Nuclear Information System (INIS)

Van den Hove, Sybille

2003-01-01

A key justification for the rapid development of participatory approaches for environment and sustainable development governance stems from the characteristics of environmental issues. Environmental issues - and radioactive waste disposal is a good example - typically present four important physical characteristics: complexity, uncertainty, large temporal and spatial scales, and irreversibility, which all have consequences on what can be called the social characteristics of environmental issues. These include: social complexity and conflicts of interests, transversality, diffuse responsibilities and impacts, no clear division between micro- and macro-levels, and short-term costs of dealing with the issue associated with benefits which might occur only in the long-term. In turn, these physical and social characteristics determine the type of problem-solving processes needed to tackle environmental issues. It appears that the problem-solving processes best suited to confront global environmental issues will be dynamic processes of capacity-building, - aiming at innovative, flexible and adjustable answers, - allowing for the progressive integration of information as it becomes available, and of different value judgements and logics, - involving various actors from different backgrounds and levels. In promoting more democratic practices, these processes additionally should supersede traditional politics and allow co-ordination across different policy areas. It is deemed that participatory approaches have the potential to meet these problem-solving requirements

Evaluation of Environmental Effects of Wave Energy Convertor Arrays

Science.gov (United States)

Jones, C. A.

2015-12-01

Stakeholders and regulators in the U.S. are generally uncertain as to the potential environmental impacts posed by deployments of marine and hydrokinetic (MHK) devices, and in particular wave energy conversion (WEC) devices, in coastal waters. The first pilot-scale WEC deployments in the U.S. have had to absorb unsustainable costs and delays associated with permitting to get devices in the water. As such, there is an urgent industry need to streamline the technical activities and processes used to assess potential environmental impacts. To enable regulators and stakeholders to become more comfortable and confident with developing effective MHK environmental assessments, a better understanding of the potential environmental effects induced by arrays of WEC devices is needed. A key challenge in developing this understanding is that the assessment of the WEC effects must come prior to deployment. A typical approach in similar environmental assessments is to use numerical models to simulate the WEC devices and array layouts so that the appropriate environmental stressors and receptors can be identified and assessed. Sandia National Laboratories (SNL) and the U.S. Department of Energy are fulfilling the industry-wide need to develop "WEC-friendly" open-source numerical modeling tools capable of assessing potential changes to the physical environment caused by the operation of WEC arrays. Studies using these tools will advance the nation's general knowledge of the interrelationships among the number, size, efficiency, and configuration of MHK arrays and the subsequent effects these relationships may have on the deployment environment. By better understanding these relationships, industry, stakeholders, and regulators will be able to work together to optimize WEC deployments such that environmental impacts are minimized while power output is maximized. The present work outlines the initial effort in coupling the SNL WEC-friendly tools with the environmental assessment

Tunable Polarity Carbon Fibers, a Holistic Approach to Environmental Protection.

Science.gov (United States)

García-Valverde, M Teresa; Ledesma-Escobar, Carlos A; Lucena, Rafael; Cárdenas, Soledad

2018-04-27

The pollution of environmental resources is an issue of social concern worldwide. Chemistry is essential for the design of decontamination strategies and analytical approaches to detect and monitor the contamination. Sorptive materials are usually required in both approaches and green synthesis should be used to minimize their own environmental impact. Carbon fibers (CFs) obtained by the pyrolysis of natural cellulose-rich materials fulfill these requirements. In this article, thirty CFs obtained under different conditions are chemically characterized and their sorption ability towards selected pollutants, covering a wide range of polarity, is evaluated. This study provides more profound knowledge related to the polarity of these materials, their interactions with chemical substances and allows the prediction of more appropriate materials (pyrolysis temperature and time) in order to remove the given pollutant. Furthermore, the use of CFs as sorptive materials for the extraction of contaminants from water samples to assist with their instrumental detection is outlined. In this sense, the use of CFs and gas chromatography with mass spectrometric detection allows the detection of selected pollutants in the low ng/mL range. Thus, this article provides an integrated approach to the potential of CFs for environmental protection.

Tunable Polarity Carbon Fibers, a Holistic Approach to Environmental Protection

Directory of Open Access Journals (Sweden)

M. Teresa García-Valverde

2018-04-01

Full Text Available The pollution of environmental resources is an issue of social concern worldwide. Chemistry is essential for the design of decontamination strategies and analytical approaches to detect and monitor the contamination. Sorptive materials are usually required in both approaches and green synthesis should be used to minimize their own environmental impact. Carbon fibers (CFs obtained by the pyrolysis of natural cellulose-rich materials fulfill these requirements. In this article, thirty CFs obtained under different conditions are chemically characterized and their sorption ability towards selected pollutants, covering a wide range of polarity, is evaluated. This study provides more profound knowledge related to the polarity of these materials, their interactions with chemical substances and allows the prediction of more appropriate materials (pyrolysis temperature and time in order to remove the given pollutant. Furthermore, the use of CFs as sorptive materials for the extraction of contaminants from water samples to assist with their instrumental detection is outlined. In this sense, the use of CFs and gas chromatography with mass spectrometric detection allows the detection of selected pollutants in the low ng/mL range. Thus, this article provides an integrated approach to the potential of CFs for environmental protection.

Risk analysis within environmental impact assessment of proposed construction activity

Energy Technology Data Exchange (ETDEWEB)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-15

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

Risk analysis within environmental impact assessment of proposed construction activity

International Nuclear Information System (INIS)

Zeleňáková, Martina; Zvijáková, Lenka

2017-01-01

Environmental impact assessment is an important process, prior to approval of the investment plan, providing a detailed examination of the likely and foreseeable impacts of proposed construction activity on the environment. The objective of this paper is to develop a specific methodology for the analysis and evaluation of environmental impacts of selected constructions – flood protection structures using risk analysis methods. The application of methodology designed for the process of environmental impact assessment will develop assumptions for further improvements or more effective implementation and performance of this process. The main objective of the paper is to improve the implementation of the environmental impact assessment process. Through the use of risk analysis methods in environmental impact assessment process, the set objective has been achieved. - Highlights: This paper is informed by an effort to develop research with the aim of: • Improving existing qualitative and quantitative methods for assessing the impacts • A better understanding of relations between probabilities and consequences • Methodology for the EIA of flood protection constructions based on risk analysis • Creative approaches in the search for environmentally friendly proposed activities.

Comparing Efficacy of Instructional Approaches to Develop Environmental Awareness Among School Students

Directory of Open Access Journals (Sweden)

Doris D’Souza

2014-12-01

Full Text Available This study aims to compare efficacy of self-learning, audiovisual, and fun activity instructional approaches among school students of Patna, the capital city of Bihar state of India, to develop environmental awareness. The study participants include 144 randomly selected students (72 girls and 72 boys from eight different schools of Patna. During a weeklong environmental awareness program, students were instructed using above three approaches of instruction. Data have been analyzed by using linear regression. Regression was carried out to eliminate the effect of general mental ability (GMA scores. The results suggest about overall superiority of fun activity approach over other approaches tested in the present study. However, awareness gain has been significant among the students with high GMA when instructed through audiovisual approach.

FY 1999 report on the potential survey of the environmentally friendly type coal utilization system. Potential survey of the environmentally friendly type coal utilization system in the Philippines; 1999 nendo chosa hokokusho. Kankyo chowa gata sekitan riyo system kanosei chosa (Firipin ni okeru kankyo chowa gata system kanosei chosa)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of contributing to working out a master plan for the introduction of the environmentally friendly type coal utilization system in the Philippines, analysis was made of the state of coal use/the state of spread by industry mostly including the electric power industry, cement industry and residential/commercial use fuel sector. In the Philippines, the amount of coal use has rapidly been increasing since coal-fired power plants started operation. For the promotion of the use of domestic coals, it is important to reform low grade coal. Moreover, the technology is required which copes with the reinforced regulation against SOx emissions. In the cement industry, coal and coal ash have not yet been effectively used. Therefore, the following measures should be taken to increase the competitive force: energy conservation measures, reinforcement of environmental measures such as dust prevention, and effective use of the fly ash emitted from power plants. In general households and small-/medium-sized industries such as tobacco drying, they still use a large amount of charcoals and firewood, which is approximately 86% of the residential/commercial use energy. There is a growing tendency for the development/spread of coal briquette as substituting energy. (NEDO)

New-generation bar adsorptive microextraction (BAμE) devices for a better eco-user-friendly analytical approach-Application for the determination of antidepressant pharmaceuticals in biological fluids.

Science.gov (United States)

Ide, A H; Nogueira, J M F

2018-05-10

The present contribution aims to design new-generation bar adsorptive microextraction (BAμE) devices that promote an innovative and much better user-friendly analytical approach. The novel BAμE devices were lab-made prepared having smaller dimensions by using flexible nylon-based supports (7.5 × 1.0 mm) coated with convenient sorbents (≈ 0.5 mg). This novel advance allows effective microextraction and back-extraction ('only single liquid desorption step') stages as well as interfacing enhancement with the instrumental systems dedicated for routine analysis. To evaluate the achievements of these improvements, four antidepressant agents (bupropion, citalopram, amitriptyline and trazodone) were used as model compounds in aqueous media combined with liquid chromatography (LC) systems. By using an N-vinylpyrrolidone based-polymer phase good selectivity and efficiency were obtained. Assays performed on 25 mL spiked aqueous samples, yielded average recoveries in between 67.8 ± 12.4% (bupropion) and 88.3 ± 12.1% (citalopram), under optimized experimental conditions. The analytical performance also showed convenient precision (RSD  0.9820). The application of the proposed analytical approach on biological fluids showed negligible matrix effects by using the standard addition methodology. From the data obtained, the new-generation BAμE devices presented herein provide an innovative and robust analytical cycle, are simple to prepare, cost-effective, user-friendly and compatible with the current LC autosampler systems. Furthermore, the novel devices were designed to be disposable and used together with negligible amounts of organic solvents (100 μL) during back-extraction, in compliance with the green analytical chemistry principles. In short, the new-generation BAμE devices showed to be an eco-user-friendly approach for trace analysis of priority compounds in biological fluids and a versatile alternative over other well-stablished sorption

Optimised Environmental Test Approaches in the GOCE Project

Science.gov (United States)

Ancona, V.; Giordano, P.; Casagrande, C.

2004-08-01

The Gravity Field and Steady-State Ocean Circulation Explorer (GOCE) is dedicated to measuring the Earth's gravity field and modelling the geoid with extremely high accuracy and spatial resolution. It is the first Earth Explorer Core mission to be developed as part of ESA's Living Planet Programme and is scheduled for launch in 2006. The program is managed by a consortium of European companies: Alenia Spazio, the prime contractor, Astrium GmbH, the platform responsible, Alcatel Space Industries and Laben, suppliers of the main payloads, respectively the Electrostatic Gravity Gradiometer (EGG) and the Satellite to Satellite Tracking Instrument (SSTI), actually a precise GPS receiver. The GOCE Assembly Integration and Verification (AIV) approach is established and implemented in order to demonstrate to the customer that the satellite design meets the applicable requirements and to qualify and accept from lower level up to system level. The driving keywords of "low cost" and "short schedule" program, call for minimizing the development effort by utilizing off-the-shelf equipment combined with a model philosophy lowering the number of models to be used. The paper will deal on the peculiarities of the optimized environmental test approach in the GOCE project. In particular it introduces the logic of the AIV approach and describe the foreseen tests at system level within the SM environmental test campaign, outlining the Quasi Static test performed in the frame of the SM sine vibration tests, and the PFM environmental test campaign pinpointing the deletion of the Sine Vibration test on PFM model. Furthermore the paper highlights how the Model and Test Effectiveness Database (MATD) can be utilized for the prediction of the new space projects like GOCE Satellite.

Practical Biostatistics A Friendly Step-by-Step Approach for Evidence-based Medicine

CERN Document Server

Suchmacher, Mendel

2012-01-01

Evidence-based medicine aims to apply the best available evidence gained from the scientific method to medical decision making. It is a practice that uses statistical analysis of scientific methods and outcomes to drive further experimentation and diagnosis. The profusion of evidence-based medicine in medical practice and clinical research has produced a need for life scientists and clinical researchers to assimilate biostatistics into their work to meet efficacy and practical standards. Practical Biostatistics provides researchers, medical professionals, and students with a friendly, practica

A multi-scale spatial approach to address environmental effects of small hydropower development.

Science.gov (United States)

McManamay, Ryan A; Samu, Nicole; Kao, Shih-Chieh; Bevelhimer, Mark S; Hetrick, Shelaine C

2015-01-01

Hydropower development continues to grow worldwide in developed and developing countries. While the ecological and physical responses to dam construction have been well documented, translating this information into planning for hydropower development is extremely difficult. Very few studies have conducted environmental assessments to guide site-specific or widespread hydropower development. Herein, we propose a spatial approach for estimating environmental effects of hydropower development at multiple scales, as opposed to individual site-by-site assessments (e.g., environmental impact assessment). Because the complex, process-driven effects of future hydropower development may be uncertain or, at best, limited by available information, we invested considerable effort in describing novel approaches to represent environmental concerns using spatial data and in developing the spatial footprint of hydropower infrastructure. We then use two case studies in the US, one at the scale of the conterminous US and another within two adjoining rivers basins, to examine how environmental concerns can be identified and related to areas of varying energy capacity. We use combinations of reserve-design planning and multi-metric ranking to visualize tradeoffs among environmental concerns and potential energy capacity. Spatial frameworks, like the one presented, are not meant to replace more in-depth environmental assessments, but to identify information gaps and measure the sustainability of multi-development scenarios as to inform policy decisions at the basin or national level. Most importantly, the approach should foster discussions among environmental scientists and stakeholders regarding solutions to optimize energy development and environmental sustainability.

Environmentally Friendly Utilization of Wheat Straw Ash in Cement-Based Composites

Directory of Open Access Journals (Sweden)

Shazim Ali Memon

2018-04-01

600 °C and ground for 120 min was found to be the most effective way to use pozzolanic material in cement-based composites. The addition of WSA in cement-based composites would achieve manifold objectives, i.e., aiding in the production of environmentally friendly concrete, the use of wheat straw as fuel for electricity production, and adding economic value to wheat straw.

Radical Homemaking in Contemporary American Environmental Fiction

Directory of Open Access Journals (Sweden)

Kristin J. Jacobson

2018-02-01

Full Text Available Ursula K. Heise in ‘Ecocriticism and the Transnational Turn in American Studies’ critiques ‘the portrayal of multicultural and sometimes transnational nuclear families as the narrative solution to environmental and political problems’ (Heise, 2008: 383. This essay places Heise’s critique of the ‘ecological family romance’ in conversation with three other ecological domestic fictions: T. C. Boyle’s 'A Friend of the Earth' (2000, Jonathan Franzen’s 'Freedom' (2010, and Barbara Kingsolver’s 'Flight Behavior' (2012. Heise’s critique and Shannon Hayes’ 'Radical Homemakers' (2010 frame my close readings of the novels’ interconnected themes of radical homemaking, transnationalism, and environmentalism. My reading of the novels highlights their shared use of marginalized, racially-other characters to develop their entwined romantic and environmental plots (Lalitha in 'Freedom', several minor characters in 'A Friend of the Earth', and Ovid in 'Flight Behavior' and their use of sentimental deaths, especially of key female characters (Lalitha in Freedom, Sierra in A Friend of the Earth, and Dellarobia’s uncertain fate in Flight Behavior. By adopting the sentimental, domestic romance plot for ecological aims, the three novels highlight how environmental aims get stymied when cultural and ecological diversity are relegated to the margins. They also suggest that more is gained than lost through their use of ecological allegory. While the fictions do not offer solutions, they do push their readers to confront the Anthropocene’s ecological realities and their radical domestic-environmental politics.

Natural gas: an environmental-friendly solution?

International Nuclear Information System (INIS)

Vermeire, J.

1994-01-01

Since 1970, the portion of natural gas in energy consumption in Western-Europe has grown by 6 percent per year on the average. About 20 percent of the energy demand in Western-Europe is now covered by natural gas. It is forecasted that this growth will continue at a rate of 2 percent per year until 2010. The natural gas consumption will increase from 325 billion cubic metres in 1993 to 450 billion cubic metres per year in 2010. For the coming 10 to 15 years, the natural gas demand is covered by long-term contracts with gas producing countries. From 2010 on, additional contracts, covering 70 to 120 billion cubic metres per year are required. A shift in geographic distribution of countries from which natural gas will be imported by Western-European countries is expected, which implies high investments and additional costs for transport and distribution of natural gas. Due to its qualities with respect to environmental impact, yield, availability, and advanced technology, natural gas is the energy vector of the 21 first century. (A.S.)

User friendly packaging

DEFF Research Database (Denmark)

Geert Jensen, Birgitte

2010-01-01

Most consumers have experienced occasional problems with opening packaging. Tomato sauce from the tinned mackerel splattered all over the kitchen counter, the unrelenting pickle jar lid, and the package of sliced ham that cannot be opened without a knife or a pair of scissors. The research project...... “User-friendly Packaging” aims to create a platform for developing more user-friendly packaging. One intended outcome of the project is a guideline that industry can use in development efforts. The project also points the way for more extended collaboration between companies and design researchers. How...... can design research help industry in packaging innovation?...

Earning capacity of environmentally friendly companies and social responsible investing

International Nuclear Information System (INIS)

Bjerk, Jan

2002-01-01

Firms on Dow Jones Sustainability Index yield over time the same return as the ''ordinary'' firms on the Dow Jones World Stock Index. There are several investment funds today that deal in shares with selected companies having a high environmental or ethical profile. This is Social Responsible Investing (SRI). When the Norwegian company Storebrand Kapitalforvaltning selects companies for SRI, they exclude immediately nuclear power stations, tobacco factories and manufacturers of land mines. In addition to the same return on invested capital, both investors and society get an environmental profit. The firms analysed and selected by Storebrand for SRI contributes significantly less negative environmental effects than the other firms, typically 33% less to the global heating and have on average 53% less toxic emissions and 45% less water consumption

75 FR 63851 - Draft Friends Organizations Policy

Science.gov (United States)

2010-10-18

...] Draft Friends Organizations Policy AGENCY: Fish and Wildlife Service, Department of the Interior. ACTION... Service's mission through partnerships with Friends organizations (volunteer/advocate). Today, Friends organizations play a vital role in helping to fulfill the Service's mission of ``working with others, to...

Marketing Animal-Friendly Products: Addressing the Consumer Social Dilemma with Reinforcement Positioning Strategies.

Science.gov (United States)

van Riemsdijk, Lenka; Ingenbleek, Paul T M; van Trijp, Hans C M; van der Veen, Gerrita

2017-12-14

This article presents a conceptual framework that aims to encourage consumer animal-friendly product choice by introducing positioning strategies for animal-friendly products. These strategies reinforce the animal welfare with different types of consumption values and can therefore reduce consumers' social dilemma, which is a major barrier to animal-friendly consumer choices. The article suggests how animal-friendly products can use various types of consumption values (functional, sensory, emotional, social, epistemic and situational) to create an attractive position relative to their competitors. It also explains why some consumer segments, such as those with a specific thinking style, may experience a stronger effect of some strategies, giving directions on how to approach different types of consumers. Finally, building on research asserting that animal welfare is a credence product attribute, the article proposes moderating effects of two factors that help consumers to evaluate the credibility of animal welfare claims, namely corporate social responsibility strategy and the role of stakeholders. Here it concludes that companies selling animal-friendly products need to be aware of the impact of their overall strategy on the effectiveness of positioning strategies for individual products and that, to gain consumer trust, they may need to collaborate with relevant stakeholders, such as media or animal-interest organizations.

Marketing Animal-Friendly Products: Addressing the Consumer Social Dilemma with Reinforcement Positioning Strategies

Directory of Open Access Journals (Sweden)

Lenka van Riemsdijk

2017-12-01

Full Text Available This article presents a conceptual framework that aims to encourage consumer animal-friendly product choice by introducing positioning strategies for animal-friendly products. These strategies reinforce the animal welfare with different types of consumption values and can therefore reduce consumers’ social dilemma, which is a major barrier to animal-friendly consumer choices. The article suggests how animal-friendly products can use various types of consumption values (functional, sensory, emotional, social, epistemic and situational to create an attractive position relative to their competitors. It also explains why some consumer segments, such as those with a specific thinking style, may experience a stronger effect of some strategies, giving directions on how to approach different types of consumers. Finally, building on research asserting that animal welfare is a credence product attribute, the article proposes moderating effects of two factors that help consumers to evaluate the credibility of animal welfare claims, namely corporate social responsibility strategy and the role of stakeholders. Here it concludes that companies selling animal-friendly products need to be aware of the impact of their overall strategy on the effectiveness of positioning strategies for individual products and that, to gain consumer trust, they may need to collaborate with relevant stakeholders, such as media or animal-interest organizations.

Environmental programmes with refugees: abandon the blanket approach?

Directory of Open Access Journals (Sweden)

Greg Grimsich

1998-12-01

Full Text Available Approaches to environmental problems in refugee emergencies have traditionally focused on two main areas: promotion of tree planting and dissemination of fuel-efficient stoves. This is done with the intention of increasing wood supply and simultaneously reducing the level of demand. Such activities are relatively easy for non-specialists to implement. They also produce two visible (and hence quantifiable assets in a short space of time: trees and stoves.A case study from western Tanzania illustrates the diminished utility of such approaches where natural resources are locally abundant.

Super Global Projects and Environmentally Friendly Technologies Used in Space Exploration: Realities and Prospects of the Space Age

Directory of Open Access Journals (Sweden)

Sergey Krichevsky

2018-02-01

Full Text Available The 60th anniversary of the Space Age is an important intermediate finishing point on the way of a man and the whole humanity to space. Along with the outstanding achievements, there are a number of challenges and contradictions in space exploration due to the aggravation of the global crisis on Earth, low efficiency and the backlog of space research in the transition to a new technology based reality and clean technologies. Both the international astronautics and the space exploration area nowadays face difficulties in choosing a new paradigm and a development strategy that is becoming even more complicated due to the current unstable and turbulent situation on Earth. The article reveals the optimistic scenario of further space exploration, as well as the methodological and practical aspects of new projects and technologies. The periodization of the Space Age history has been conducted. It has been also proposed a new classification of the “space” phenomenon due to concretizing the concept of “global” in the form of a three-scale structure encompassing the following levels: 1 planetary global; 2 super global; 3 universally global. The notion of “super global space exploration project” has been introduced. The concept of further space exploration is proposed, which includes four interrelated super global projects:1 Earth Protection System from Asteroid and Comet Threat; 2 Moon Exploration; 3 Mars Exploration; 4 Cosmic Humanity. Since the humanity is embarking on the practical implementation of these super global projects, it is urgent to make a transition towards a new technology based order, as well as up-to-date technologies. A couple of ecological projects and space exploration technologies of the 20th and 21st centuries have been exemplified and analyzed. It has been also worked out the list of new environmentally friendly space technologies and projects. The research makes an emphasis upon a great potential of clean and green

Privacy‐Preserving Friend Matching Protocol approach for Pre‐match in Social Networks

DEFF Research Database (Denmark)

Ople, Shubhangi S.; Deshmukh, Aaradhana A.; Mihovska, Albena Dimitrova

2016-01-01

Social services make the most use of the user profile matching to help the users to discover friends with similar social attributes (e.g. interests, location, age). However, there are many privacy concerns that prevent to enable this functionality. Privacy preserving encryption is not suitable...... for use in social networks due to its data sharing problems and information leakage. In this paper, we propose a novel framework for privacy–preserving profile matching. We implement both the client and server portion of the secure match and evaluate its performance network dataset. The results show...

A Bottom-up Approach to Environmental Cost-Benefit Analysis

DEFF Research Database (Denmark)

Carolus, Johannes Friedrich; Hanley, Nick; Olsen, Søren Bøye

with the underlying environmental problem, and then assesses costs and benefits of various strategies and solutions suggested by local and directly affected stakeholders. For empirical case studies concerning two river catchments in Sweden and Latvia, the bottom-up CBA approach utilises local knowledge, assesses......Cost-Benefit Analysis is a method to assess the effects of policies and projects on social welfare. CBAs are usually applied in a top-down approach, in the sense that a decision-making body first decides on which policies or projects are to be considered, and then applies a set of uniform criteria...... plans which are not only developed for local conditions but are also likely to be more acceptable to local society, and sheds additional light on possible distributional effects. By not only benefitting from, but also supporting participative environmental planning, bottom-up CBA is in line...

A holistic approach to improving indoor environmental quality: A case study

International Nuclear Information System (INIS)

Milam, J.A.; Kinser, D.E.

1993-01-01

One of the big six accounting firms recently consolidated several offices into a regional headquarters located in a southern metropolitan city. This regional headquarters involved seven floors totalling 187,000 square feet of tenant space in a new high rise building. The accounting firm realized that improving their employees' work environment would provide significant savings from increased worker productivity and reduced absenteeism. Therefore, the firm retained Environmental Design International (EDI) to provide consulting services to create and maintain an environmentally healthy office space. The creation of a healthy, productive and safe indoor environment involves a total, holistic approach to the various elements that affect indoor environmental quality (IEQ) in a building. A holistic approach requires detailed evaluation of all areas that impact indoor environmental quality and not just the more common review of HVAC systems. This case study shows that the optimization of a healthy indoor environment is an endless, all inclusive process: beginning with the initial construction material selections and environmental systems design; continuing through the construction and commissioning phases; and progressing to pro-active monitoring of IEQ parameters to protect the tenant's investment in a healthy, productive and safe indoor environment

Mobile with renewable energy. Marketable solutions for climate-friendly electromobility; Erneuerbar mobil. Marktfaehige Loesungen fuer eine klimafreundliche Elektromobilitaet

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-03-15

This publication presents the goals envisioned by the German Federal Environmental Ministry for electromobility, which are outlined by the four keywords clean, gentle, economic, and practical. It then reports on focal areas of state funding and on projects: field trials on electromobility in private automotive traffic; field trials on electromobility in commercial automotive traffic; hybrid busses for environmentally friendly public transport; accompanying scientific research; and battery recycling.

Using mine waste mud to produce environmentally friendly new binders

OpenAIRE

Torgal, Fernando Pacheco; Gomes, J. P. Castro; Jalali, Said

2007-01-01

It is now accepted that new binders, such as alkali-activated binders, are needed to replace portland cement for enhanced environmental and durability performance. Alkali-activated binders have emerged as an alternative to (ordinary portland cement ) OPC binders, which seem to have superior durability and environmental impact.This paper reports results of a research project on the development of an alkali-activated binders using mineral waste mud from the Panasqueira tungsten mine in Portugal...

In Their Own Words: Adolescents Strategies to Prevent Friend's Risk Taking

Science.gov (United States)

Buckley, Lisa; Chapman, Rebekah L.; Sheehan, Mary C.; Reveruzzi, Bianca N.

2014-01-01

Injury is a significant public health problem among youth. A primary cause of adolescent injury is risk-taking behavior, including alcohol use, interpersonal violence and road-related risks. A novel approach to prevention is building on friendships by encouraging adolescents to intervene into their friends' risk taking. Fifty-one early adolescents…

[Fostering LGBT-friendly healthcare services].

Science.gov (United States)

Wei, Han-Ting; Chen, Mu-Hong; Ku, Wen-Wei

2015-02-01

LGBT (lesbian, gay, bisexual, transgender) patients suffer from stigma and discrimination when seeking healthcare. A large LGBT healthcare survey revealed that 56% of gay patients and 70% of transgender patients suffered some type of discrimination while seeking healthcare in 2014. The fostering of LGBT-friendly healthcare services is not just an advanced step of gender mainstreaming but also a fulfillment of health equality and equity. Additionally, LGBT-friendly healthcare services are expected to provide new opportunities for healthcare workers. Therefore, proactive government policies, education, research, and clinical practice should all encourage the development of these healthcare services. We look forward to a well-developed LGBT-friendly healthcare system in Taiwan.

Development of Environment-Friendly Insecticides Based on Enantioselectivity: Bifenthrin as a Case.

Science.gov (United States)

Qian, Yi; Zhou, Peixue; Zhang, Quan

2017-01-01

Chiral insecticides significantly contribute to the environmental pollutions recently. As the development of industry and agriculture, increasing number of chiral insecticides are to be introduced into the market. However, their enantioselective toxicology to ecosystem still remains uncertain. In this review, we embarked on a structured search of bibliographic databases for peer-reviewed articles regarding the enantioselective effects of bifenthrin, a typical chiral insecticide, on both target and non-target species. With this enantioselective property of chiral insecticides, they often exhibit adverse effects on non-target species enantioselectively. Specifically, the enantioselective effects of bifenthrin on target and non-target organisms were discussed. In target species, R-bifenthrin exerts more significant activities in deinsectization, compared with S-bifenthrin. On the other hand, Sbifenthrin is more toxic to non-target species than R-bifenthrin, which suggests that the application of sole enantiomer is more efficient and environment-friendly than that of racemate. This review confirms the choice of environment-friendly insecticides from the perspective of the enantioselectivity of chiral insecticides. To make insecticides more efficient to target species and less toxic to non-target species, further research should be done to investigated the potential effects of targetactive enantiomers on non-target organisms as well as the enantioselective fate of enantiomers in multiple environmental matrix.

Show me your friends and I will tell you what type of person you are: how own profile, number of friends, and type of friends influence impression formation on social network sites

NARCIS (Netherlands)

Utz, S.

2010-01-01

This experiment examines how far extraversion of the target (self-generated information), extraversion of the target's friends (friends-generated information), and number of friends (system-generated information) influence the perceived popularity, communal orientation, and social attractiveness of

FY 1998 annual report on the fourth international forum on environmental catalysis (IFEC 99); Dai 4 kai kankyo shokubai kokusai forum (IFEC '99) 1998 nendo hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

The 4th international forum on environmental catalysis, held in January 1999 in Chemical Society of Japan's Hall, had a total attendees exceeding 170, including 10 foreign attendees invited. A total of 20 papers (including 10 by foreign attendees) were presented, discussing diversified problems; 3 keynote addresses regarding (to what extent environmental catalyst can contribute); and 5 for the session of catalysts for clean processes, 6 for the session of eco-friendly chemistry, and 8 for the session of environmental catalysts for air pollution. The lectures included (global environmental problems and environmental catalysts) by Prof. Segawa of Sophia University as the opening address; solid base catalysts by Prof. Ono of Tokyo Institute of Technology in the session of (catalysts for clean processes); activation of dioxygen by transition metal complexes-new approach to highly selective catalytic oxidation with molecular oxygen by Prof. Moro-oka of Tokyo Institute of Technology in the session of (Eco-friendly chemistry; and environmental catalysts-present and future as the comprehensive review by Prof. Misono of University of Tokyo in the session of (environmental catalysts for air pollution). (NEDO)

CH3NH3Pb1-xMgxI3 perovskites as environmentally friendly photovoltaic materials

Science.gov (United States)

Zhang, Y. D.; Feng, J.

2018-01-01

In an effort to reduce the toxicity of Pb in perovskite solar cells, the band structures, electron and hole effective masses, and electronic and optical properties of the novel perovskites CH3NH3Pb1-xMgxI3 were predicted using density functional theory with the scalar relativistic generalized gradient approximation. The calculation results indicated that the introduction of the Mg component caused the band gaps of the CH3NH3Pb1-xMgxI3 compounds to exceed that of CH3NH3PbI3. The calculated absorption coefficients of the CH3NH3PbI3 and CH3NH3Pb1-xMgxI3 perovskites revealed that substituting 12.5 mol % of the Pb in CH3NH3PbI3 with Mg had little effect on the absorption ability. Surprisingly, it was also found that CH3NH3Pb0.75Mg0.25I3 retained up to 83% of the absorption performance relative to CH3NH3PbI3. This indicates that the amount of toxic Pb used in perovskite solar cells could be reduced by a quarter while retaining over 80% of the light-absorbing ability. In general, these novel CH3NH3Pb1-xMgxI3 (x ≤ 0.25) perovskites represent promising candidates for environmentally friendly light-harvesting materials for use in solar cells.

Ecocatalysis for 2H-chromenes synthesis: an integrated approach for phytomanagement of polluted ecosystems.

Science.gov (United States)

Escande, Vincent; Velati, Alicia; Grison, Claude

2015-04-01

A direct, general and efficient method to synthesize 2H-chromenes (2H-benzo[b]pyrans), identified as environmentally friendly pesticides, has been developed. This approach lays on the new concept of ecocatalysis, which involves the use of biomass from phytoextraction processes, as a valuable source of metallic elements for chemical synthesis. This methodology is similar or superior to known methods, affording 2H-chromenes with good to excellent yields (60-98%), including the preparation of precocene I, a natural insect growth regulator, with 91% yield. The approach is ideal for poor reactive substrates such as phenol or naphthol, classically transformed into 2H-chromenes by methodologies associated with environmental issues. These results illustrate the interest of combining phytoextraction and green synthesis of natural insecticides.

Hispanic Labor Friends Initiative: supporting vulnerable women.

Science.gov (United States)

Hazard, Cambria Jones; Callister, Lynn Clark; Birkhead, Ana; Nichols, Lisa

2009-01-01

To evaluate the qualitative aspects of the Hispanic Labor Friends Initiative. "Hispanic Labor Friends," bilingual Hispanic community women who were themselves mothers, were recruited by clinic and hospital personnel. Women who agreed were educated, received translation certification, and were oriented to the initiative. Pregnant Hispanic immigrant women seen in the health center who met criteria set by the multidisciplinary health care team were assigned a Hispanic Labor Friend by 32 weeks' gestation. Hispanic Labor Friends assisted women with communication with healthcare providers and provided social support. Qualitative evaluation of the program consisted of interviews with several groups: (1) Hispanic immigrant women who had a Hispanic Labor Friend, (2) Hispanic immigrant women who were not in the Hispanic Labor Friends program, (3) Hispanic Labor Friends, (4) healthcare providers for Hispanic women. Data saturation was reached, and data were analyzed by the research team using descriptive qualitative inquiry. The Hispanic immigrant women described positive outcomes from being involved in the Hispanic Labor Friends program, including feeling supported and comforted. "I felt as though my family were at my side." One woman who had standard care said, "It is hard for me to communicate. When I gave birth, the nurses asked me things, and I didn't understand anything. I stayed quiet." One of the nurses who was interviewed said: "I think they [the HLF patients] get better care. Sometimes we think we can communicate with them with their little bit of English and our little bit of Spanish. But you get an HLF and it's a totally different story. We can more adequately tell what's going on with them...They end up getting better care." One Hispanic Labor Friend said, "The women are very appreciative that I was there to help them through a critical time." Women who participated in the study identified the need to have a continuing association with Hispanic Labor Friends in

Green Synthesis of Iron Nanoparticles and Their Environmental Applications and Implications

Science.gov (United States)

Saif, Sadia; Tahir, Arifa; Chen, Yongsheng

2016-01-01

Recent advances in nanoscience and nanotechnology have also led to the development of novel nanomaterials, which ultimately increase potential health and environmental hazards. Interest in developing environmentally benign procedures for the synthesis of metallic nanoparticles has been increased. The purpose is to minimize the negative impacts of synthetic procedures, their accompanying chemicals and derivative compounds. The exploitation of different biomaterials for the synthesis of nanoparticles is considered a valuable approach in green nanotechnology. Biological resources such as bacteria, algae fungi and plants have been used for the production of low-cost, energy-efficient, and nontoxic environmental friendly metallic nanoparticles. This review provides an overview of various reports of green synthesised zero valent metallic iron (ZVMI) and iron oxide (Fe2O3/Fe3O4) nanoparticles (NPs) and highlights their substantial applications in environmental pollution control. This review also summarizes the ecotoxicological impacts of green synthesised iron nanoparticles opposed to non-green synthesised iron nanoparticles. PMID:28335338

Green Synthesis of Iron Nanoparticles and Their Environmental Applications and Implications

Directory of Open Access Journals (Sweden)

Sadia Saif

2016-11-01

Full Text Available Recent advances in nanoscience and nanotechnology have also led to the development of novel nanomaterials, which ultimately increase potential health and environmental hazards. Interest in developing environmentally benign procedures for the synthesis of metallic nanoparticles has been increased. The purpose is to minimize the negative impacts of synthetic procedures, their accompanying chemicals and derivative compounds. The exploitation of different biomaterials for the synthesis of nanoparticles is considered a valuable approach in green nanotechnology. Biological resources such as bacteria, algae fungi and plants have been used for the production of low-cost, energy-efficient, and nontoxic environmental friendly metallic nanoparticles. This review provides an overview of various reports of green synthesised zero valent metallic iron (ZVMI and iron oxide (Fe2O3/Fe3O4 nanoparticles (NPs and highlights their substantial applications in environmental pollution control. This review also summarizes the ecotoxicological impacts of green synthesised iron nanoparticles opposed to non-green synthesised iron nanoparticles.

A probabilistic approach to Radiological Environmental Impact Assessment

International Nuclear Information System (INIS)

Avila, Rodolfo; Larsson, Carl-Magnus

2001-01-01

Since a radiological environmental impact assessment typically relies on limited data and poorly based extrapolation methods, point estimations, as implied by a deterministic approach, do not suffice. To be of practical use for risk management, it is necessary to quantify the uncertainty margins of the estimates as well. In this paper we discuss how to work out a probabilistic approach for dealing with uncertainties in assessments of the radiological risks to non-human biota of a radioactive contamination. Possible strategies for deriving the relevant probability distribution functions from available empirical data and theoretical knowledge are outlined

Critical friends and collaborative partnership

Directory of Open Access Journals (Sweden)

Katarina Jandér

2013-12-01

Full Text Available Critical friends: a method for peer feedback The Critical Friend-method has been used in various educational settings to facilitate the process of continuous improvement in teaching. The aim of this study was to implement Critical Friends, and to find out if this method could be used for feedback on teaching as part of a librarians' professional development. The project was carried out within the Library Unit of the Faculty of Medicine at Lund University, Sweden, in collaboration with the faculty's Centre for Teaching and Learning. Seven librarians and an educational consultant from the Centre for Teaching and Learning participated; the educational consultant played an essential role in supervising and structuring the project and the evaluation process, preparing readings as well as being an active participant. The participants worked in pairs; the performance of one teacher and the associated classroom activities were observed by the critical friend, and then evaluated and discussed. Evaluation and results After two preparatory group meetings, a final meeting was held where all pairs reported what they had done and how they perceived the critical friend process. The experiences of the participating librarians were explored using a questionnaire. The questionnaire was analyzed using content analysis by one librarian and the educational consultant independently. The results suggested that use of the critical friend method could have a positive impact by achieving the following: strengthening shared values concerning teaching issues; promoting self-reflection on teaching; facilitating communication with colleagues; and reducing the sense of 'loneliness‘ in teaching. The difficulties in the implementation were lack of time and competing duties. It was perceived as an advantage to work in close partnership with the faculty's educational consultants, who were familiar with the organization.

Properties of potential eco-friendly gas replacements for particle detectors in high-energy physics

Science.gov (United States)

Saviano, G.; Ferrini, M.; Benussi, L.; Bianco, S.; Piccolo, D.; Colafranceschi, S.; KjØlbro, J.; Sharma, A.; Yang, D.; Chen, G.; Ban, Y.; Li, Q.; Grassini, S.; Parvis, M.

2018-03-01

Gas detectors for elementary particles require F-based gases for optimal performance. Recent regulations demand the use of environmentally unfriendly F-based gases to be limited or banned. This work studies properties of potential eco-friendly gas replacements by computing the physical and chemical parameters relevant for use as detector media, and suggests candidates to be considered for experimental investigation.

Environmental knowledge and attitudes and behaviours towards energy consumption.

Science.gov (United States)

Paço, Arminda; Lavrador, Tânia

2017-07-15

Numerous investigations have arisen in order to study and characterise environmentally friendly consumer profiles, with some authors applying the relationship between knowledge, attitudes and behaviour to this end. The present research approach, based upon the Theory of Reasoned Action (TRA), seeks to verify the existence of relationships between knowledge and attitudes and between knowledge and environmental behaviour. In this instance, data collection involved a questionnaire aimed at assessing the overall environmental knowledge of respondents as well as their attitudes and behaviours regarding energy issues (savings, consumption, interest, use). The results pointed to the lack of relationship between knowledge and attitudes, and between knowledge and behaviour whilst the relationship between attitudes and behaviour proved to be only weak. The results also found that males, older students and those studying Engineering and the Social and Human Sciences are those reporting higher levels of environmental knowledge. However, when it comes to attitudes and behaviours, females seem to display more awareness around these issues. Copyright © 2017 Elsevier Ltd. All rights reserved.

Environment-friendly green chemistry approaches for an efficient synthesis of 1-amidoalkyl-2-naphthols catalyzed by tannic acid

Directory of Open Access Journals (Sweden)

Rajesh K. Singh

2018-01-01

Full Text Available A new, facile, cost-effective and environment-friendly protocol is reported for the synthesis of 1-amidoalkyl-2-naphthols exploring tannic acid as a novel, cheap and biodegradable catalyst. β-naphthol is condensed with substituted aromatic aldehydes and various amides using catalytic amount of tannic acid in the absence of solvent under thermal (hot plate and oil bath and microwave irradiation techniques. This green protocol offers many advantages such as short reaction time, use of environment-friendly and cheap catalyst and good to excellent yields.

To friend or not to friend? Social networking and faculty perceptions of online professionalism.

Science.gov (United States)

Chretien, Katherine C; Farnan, Jeanne M; Greysen, S Ryan; Kind, Terry

2011-12-01

To assess faculty perceptions of professional boundaries and trainee-posted content on social networking sites (SNS). In June 2010, the Clerkship Directors in Internal Medicine conducted its annual survey of U.S. and Canadian member institutions. The survey included sections on demographics and social networking. The authors used descriptive statistics and tests of association to analyze the Likert scale responses and qualitatively analyzed the free-text responses. Of 110 institutional members, 82 (75%) responded to the survey. Of the 40 respondents who reported current or past SNS use, 21 (53%) reported receiving a "friend request" from a current student and 25 (63%) from a current resident. Of these, 4 (19%) accepted the student request and 12 (48%) accepted the resident request. Sixty-three of 80 (79%) felt it was inappropriate to send a friend request to a current student, 61 (76%) to accept a current student's request, 42 (53%) to become friends with a current resident, and 61 (81%) to become friends with a current patient. Becoming friends with a former student, former resident, or colleague was perceived as more appropriate. Younger respondents were less likely to deem specific student behaviors inappropriate (odds ratio [OR] 0.18-0.79; adjusted OR 0.12-0.86, controlling for respondents' sex, rank, and SNS use), although none reached statistical significance. Some internal medicine educators are using SNSs and interacting with trainees online. Their perceptions on the appropriateness of social networking behaviors provide some consensus for professional boundaries between faculty and trainees in the digital world.

Critical analysis of frameworks and approaches to assess the environmental risks of nanomaterials

DEFF Research Database (Denmark)

Grieger, Khara Deanne; Linkov, Igor; Hansen, Steffen Foss

and approaches which have been developed or proposed by large organizations or regulatory bodies for NM. These frameworks and approaches were evaluated and assessed based on a select number of criteria which have been previously proposed as important parameters for inclusion in successful risk assessment......7.1.7 Critical analysis of frameworks and approaches to assess the environmental risks of nanomaterials Khara D. Grieger1, Igor Linkov2, Steffen Foss Hansen1, Anders Baun1 1Technical University of Denmark, Kgs. Lyngby, Denmark 2Environmental Laboratory, U.S. Army Corps of Engineers, Brookline, USA...... Email: kdg@env.dtu.dk Scientists, organizations, governments, and policy-makers are currently involved in reviewing, adapting, and formulating risk assessment frameworks and strategies to understand and assess the potential environmental risks of engineered nanomaterials (NM). It is becoming...

Baby-Friendly Practices Minimize Newborn Infants Weight Loss.

Science.gov (United States)

Procaccini, Diane; Curley, Ann L Cupp; Goldman, Martha

2018-04-01

It is accepted that newborns lose weight in the first few days of life. Baby-Friendly practices that support breastfeeding may affect newborn weight loss. The objective of this study were: 1) To determine whether Baby-Friendly practices are associated with term newborn weight loss day 0-2 in three feeding categories (exclusively breastfed, mixed formula fed and breastfed, and formula fed). 2) To determine whether Baby-Friendly practices increase exclusive breast feeding rates in different ethnic populations. This was a retrospective case-control study. Term newborn birth weight, neonatal weights days 0-2, feeding type, type of birth, and demographic information were collected for 1,000 births for the year before Baby-Friendly designation (2010) and 1,000 in 2013 (after designation). Ultimately 683 in the first group and 518 in the second met the inclusion criteria. Mean weight loss decreased day 0-2 for infants in all feeding types after the initiation of Baby-Friendly practices. There was a statistically significant effect of Baby-Friendly designation on weight loss for day 0-2 in exclusively breastfed infants (p Baby-Friendly practices were put in place. There was a decrease in mean weight loss day 0-2 regardless of feeding type after Baby-Friendly designation. Exclusive breast feeding increased in the presence of Baby-Friendly practices.

More Colleges Are Adding Family-Friendly Benefits

Science.gov (United States)

Wilson, Robin

2008-01-01

Results of a new survey of family-friendly benefits by the Center for the Education of Women at the University of Michigan at Ann Arbor show that stopping the tenure clock has become the most common family-friendly benefit in higher education, following paid maternity leave. Other family-friendly policies that top the list in academe allow…

Age-friendly environments and life satisfaction among South Korean elders: person-environment fit perspective.

Science.gov (United States)

Park, Sojung; Lee, Sangchul

2017-07-01

Drawing on the person-environment (P-E) fit perspective, this study examined the role of environment on the well-being of vulnerable older adults in a non-western context. Using the indicators from the World Health Organization's (WHO) framework for age friendly cities (ACF), we examined life satisfaction among South Korean older adults, exploring the extent to which multidimensional environmental characteristics are associated with low socioeconomic status (SES). Using the regionally representative data from the Seoul City-wide needs assessment of middle- and old-aged adults, an analytic sample (N = 1657) focused on community-living individuals aged 65 and older. Multilevel regression models examined interaction between SES subgroups and varying aspects of the environment (i.e. physical, social, and service environment) as related to life satisfaction. Consistent with the environmental docility hypothesis, members of the most vulnerable subgroup in the Korean context - older adults who are living alone and poor - are more likely to have higher life satisfaction when they have higher levels of support in physical and social environments. Interestingly, a higher level of support in the service environment was related to lower life satisfaction for this subgroup. This study provides an empirical foundation for efforts to identify age-friendly environmental characteristics as modifiable environmental resources that can improve older adults' psychological well-being. As the first attempt to use WHO ACF indicators within the P-E fit perspective in a non-Western context, our study provides a foundation for designing support services or programs that effectively meet the needs of vulnerable older adults.

Wildlife-friendly farming benefits rare birds, bees and plants.

Science.gov (United States)

Pywell, Richard F; Heard, Matthew S; Bradbury, Richard B; Hinsley, Shelley; Nowakowski, Marek; Walker, Kevin J; Bullock, James M

2012-10-23

Agricultural intensification is a leading cause of global biodiversity loss, especially for threatened and near-threatened species. One widely implemented response is 'wildlife-friendly farming', involving the close integration of conservation and extensive farming practices within agricultural landscapes. However, the putative benefits from this controversial policy are currently either unknown or thought unlikely to extend to rare and declining species. Here, we show that new, evidence-based approaches to habitat creation on intensively managed farmland in England can achieve large increases in plant, bee and bird species. In particular, we found that habitat enhancement methods designed to provide the requirements of sensitive target biota consistently increased the richness and abundance of both rare and common species, with 10-fold to greater than 100-fold more rare species per sample area than generalized conventional conservation measures. Furthermore, targeting landscapes of high species richness amplified beneficial effects on the least mobile taxa: plants and bees. Our results provide the first unequivocal support for a national wildlife-friendly farming policy and suggest that this approach should be implemented much more extensively to address global biodiversity loss. However, to be effective, these conservation measures must be evidence-based, and developed using sound knowledge of the ecological requirements of key species.

Assessment of different construction and demolition waste management approaches

Directory of Open Access Journals (Sweden)

Manal S. Abdelhamid

2014-12-01

Full Text Available The waste generated from construction and demolition sites is considered one of the most irritating problems in Egypt. In the last 10 years some effort has been made toward solving this problem, the most outstanding is the newly issued Egyptian rating system “Green Pyramids Rating System”. It emphasizes on waste management and particularly “site provision and environment” which contributes to 75% of the management category score. However the traditional practice which is limited to dumping all the generated waste is still dominating. The absence of sustainable practices in construction sector in Egypt led to the lack in financial and environmental data. From strategic perspective, the research aims at developing a detailed procedure to evaluate two construction and demolition waste management approaches by means of Decision Matrix technique. A detailed study is introduced for the two approaches; for each approach a flow chart is developed to demonstrate its lifecycle, as well as the cost break down structure and the different stakeholders’ roles. A penetration discussion of the pros and cons for each approach was developed accordingly and came out with sixteen influencing attributes for both approaches. The previous steps paved the ground to construct a Decision Matrix to decide on one of the approaches from a strategic environmentally oriented perspective. The study relied on the detailed and deep demonstration of the two approaches to justify the assigned weight for attributes and scores for corresponding approach. From a strategic perspective, the decision came out in favor of the more environmentally friendly approach.

Impact of environmental inputs on reverse-engineering approach to network structures.

Science.gov (United States)

Wu, Jianhua; Sinfield, James L; Buchanan-Wollaston, Vicky; Feng, Jianfeng

2009-12-04

Uncovering complex network structures from a biological system is one of the main topic in system biology. The network structures can be inferred by the dynamical Bayesian network or Granger causality, but neither techniques have seriously taken into account the impact of environmental inputs. With considerations of natural rhythmic dynamics of biological data, we propose a system biology approach to reveal the impact of environmental inputs on network structures. We first represent the environmental inputs by a harmonic oscillator and combine them with Granger causality to identify environmental inputs and then uncover the causal network structures. We also generalize it to multiple harmonic oscillators to represent various exogenous influences. This system approach is extensively tested with toy models and successfully applied to a real biological network of microarray data of the flowering genes of the model plant Arabidopsis Thaliana. The aim is to identify those genes that are directly affected by the presence of the sunlight and uncover the interactive network structures associating with flowering metabolism. We demonstrate that environmental inputs are crucial for correctly inferring network structures. Harmonic causal method is proved to be a powerful technique to detect environment inputs and uncover network structures, especially when the biological data exhibit periodic oscillations.

Biotechnology for uranium extraction and environmental control

International Nuclear Information System (INIS)

Natarajan, K.A.

2012-01-01

India is looking forward to augmenting mining and extraction of uranium mineral for its nuclear energy needs. Being a radio-active mineral, mining and processing of uranium ore deposits need be carried out in an environmentally acceptable fashion. In this respect, a biotechnological approach holds great promise since it is environment-friendly, cost-effective and energy-efficient. There are several types of microorganisms which inhabit uranium ore bodies and biogenesis plays an important role in the mineralisation and transport of uranium-bearing minerals under the earth's crust. Uranium occurrences in India are only meagre and it becomes essential to tap effectively all the available resources. Uraninite and pitchblende occurring along with sulfide mineralisation such as pyrite are ideal candidates for bioleaching. Acidithiobacillus ferrooxidans present ubiquitously in the ore deposits can be isolated, cultured and utilised to bring about efficient acidic dissolution of uranium. Many such commercial attempts to extract uranium from even lean ores using acidophilic autotrophic bacteria have been made in different parts of the world. Anaerobes such a Geobacter and Sulfate Reducing Bacteria (SRB) can be effectively used in uranium mining for environmental control. Radioactive uranium mined wastes and tailing dumps can be cleaned and protected using microorganisms. In this lecture use of biotechnology in uranium extraction and bioremediation is illustrated with practical examples. Applicability of environment-friendly biotechnology for mining and extraction of uranium from Indian deposits is outlined. Commercial potentials for bioremediation in uranium-containing wastes are emphasised. (author)

Speech Acts During Friends' and Non-friends' Spontaneous Conversations in Preschool Dyads with High-Functioning Autism Spectrum Disorder versus Typical Development.

Science.gov (United States)

Bauminger-Zviely, Nirit; Golan-Itshaky, Adi; Tubul-Lavy, Gila

2017-05-01

In this study, we videotaped two 10-min. free-play interactions and coded speech acts (SAs) in peer talk of 51 preschoolers (21 ASD, 30 typical), interacting with friend versus non-friend partners. Groups were matched for maternal education, IQ (verbal/nonverbal), and CA. We compared SAs by group (ASD/typical), by partner's friendship status (friend/non-friend), and by partner's disability status. Main results yielded a higher amount and diversity of SAs in the typical than the ASD group (mainly in assertive acts, organizational devices, object-dubbing, and pretend-play); yet, those categories, among others, showed better performance with friends versus non-friends. Overall, a more nuanced perception of the pragmatic deficit in ASD should be adopted, highlighting friendship as an important context for children's development of SAs.

Nordic Analysis of Climate Friendly Buildings

DEFF Research Database (Denmark)

Andresen, Inger; Thomsen, Kirsten Engelund; Wahlstrøm, Åsa

This report summarizes the findings of the work conducted within the project “Nordic Analysis of Climate Friendly Buildings”, financed by the Nordic Council of Ministers. The main goal of the project was to establish a knowledge and decision base for a Nordic innovation program that will promote...... the development and demonstration of low energy and climate friendly buildings. The innovation program should support a development that brings the Nordic countries to an international forefront with respect to business strongholds and market penetration of low energy and climate friendly buildings....

Can Environmental Regulations Promote Corporate Environmental Responsibility? Evidence from the Moderated Mediating Effect Model and an Empirical Study in China

Directory of Open Access Journals (Sweden)

Benhong Peng

2018-02-01

Full Text Available Based on the Stakeholder theory, a moderated mediating effect model is developed to reach the study objective, revealing an important connection that suggests environmental regulations (ERs influence corporate environmental responsibility (CER (Porter Hypothesis. In building the model, the validity of the questionnaire data was analyzed with factor analysis. By employing a two-step approach, a regression analysis is utilized to discuss the mediating effect of altruistic motivation and moderating effect of green innovation, and a structural equation model is used to explore the interactive mechanism of different variables. It is found that altruistic motivation plays a medium role in the relationship between ERs and CER, and green innovation engages a positive coordination in the relationship. The empirical study identifies factors affecting enterprises’ willingness to undertake environmental responsibility, including environment policies, corporate culture, and personal characters among others. It is also revealed that altruistic motivation is conducive to forming a community interests among enterprises and enhancing their resistance to market risks, which explains and corroborates the Stakeholder theory; and the higher the level of green innovation, the more willing enterprises are to implement environmentally friendly operations.

RELATIONSHIP BETWEEN ENVIRONMENTAL CONCERN AND GREEN PURCHASING BEHAVIOR

OpenAIRE

Kasim Tatic; Merima Cinjarevic

2010-01-01

The aim of this paper was to establish the relationship between environmental concern and consumers’ green purchasing behavior. A survey instrument was developed that used scales to measure general environmental beliefs (HEP-NEP general environmental beliefs questions) and consumer’s intention to buy environmental friendly products. Data were collected from a convenient (non-probability sampling method) sample of 150 consumers in the Sarajevo region. The results indicated that significant pos...

Optimized Solvent for Energy-Efficient, Environmentally-Friendly Capture of CO{sub 2} at Coal-Fired Power Plants

Energy Technology Data Exchange (ETDEWEB)

Farthing, G. A.; Rimpf, L. M.

2014-04-30

The overall goal of this project, as originally proposed, was to optimize the formulation of a novel solvent as a critical enabler for the cost-effective, energy-efficient, environmentally-friendly capture of CO{sub 2} at coal-fired utility plants. Aqueous blends of concentrated piperazine (PZ) with other compounds had been shown to exhibit high rates of CO{sub 2} absorption, low regeneration energy, and other desirable performance characteristics during an earlier 5-year development program conducted by B&W. The specific objective of this project was to identify PZ-based solvent formulations that globally optimize the performance of coal-fired power plants equipped with CO{sub 2} scrubbing systems. While previous solvent development studies have tended to focus on energy consumption and absorber size, important issues to be sure, the current work seeks to explore, understand, and optimize solvent formulation across the full gamut of issues related to commercial application of the technology: capital and operating costs, operability, reliability, environmental, health and safety (EH&S), etc. Work on the project was intended to be performed under four budget periods. The objective of the work in the first budget period has been to identify several candidate formulations of a concentrated PZ-based solvent for detailed characterization and evaluation. Work in the second budget period would generate reliable and comprehensive property and performance data for the identified formulations. Work in the third budget period would quantify the expected performance of the selected formulations in a commercial CO{sub 2} scrubbing process. Finally, work in the fourth budget period would provide a final technology feasibility study and a preliminary technology EH&S assessment. Due to other business priorities, however, B&W has requested that this project be terminated at the end of the first budget period. This document therefore serves as the final report for this project. It

Financial development and environmental quality: The way forward

International Nuclear Information System (INIS)

Shahbaz, Muhammad; Shahzad, Syed Jawad Hussain; Ahmad, Nawaz; Alam, Shaista

2016-01-01

The present paper re-examines the asymmetric impact of financial development on environmental quality in Pakistan for the period 1985Q1 to 2014Q4. A comprehensive index of financial development is generated using Bank- and Stock market-based financial development indicators. The results show that inefficient use of energy adversely affects the environmental quality. This suggests adoption of energy efficient technology at both production and consumption levels. These technologies would be helpful to improve environmental quality, enhance the productivity in long-run and save energy. Bank-based financial development also impedes the environment. The government should encourage lenders to ease the funding for energy sector and allocate financial resources for environment friendly businesses rather than wasting them in consumer financing. - Highlights: • A positive shock in economic growth leads carbon emissions. • Energy consumption and financial development add in environmental degradation. • Financial resources should be allocated to environment friendly ventures.

Fashion design solutions for environmentally conscious consumers

Science.gov (United States)

Wagner, M.; Chen, Y.; Curteza, A.; Thomassey, S.; Perwuelz, A.; Zeng, X.

2017-10-01

This paper intends to give an overview of the design solutions in fashion for environmentally conscious consumers, presenting green and ethical practices in contemporary clothing design. The results introduce the concept of slow fashion and discuss available fashion design solutions, giving most prominent examples of sustainable products and brands, these contain one or more design features. By this, the discussion extracts the main contemporary ideas. The presented examples of current offers are all envisioning less impact on the environment and society. Sustainable design solutions use more environmentally friendly materials such as organic cotton, incorporate circular design or design for recycling, e.g., replacing button closures with alternative closing possibilities or leather labels with printed versions, or ensure long product life through durability, among other methods. There are differing designs due to creators’ individuality. This overview can be beneficial for the future development of new solutions for more environmentally friendly fashion.

Towards a Research Agenda for Cyber Friendly Fire

Energy Technology Data Exchange (ETDEWEB)

Greitzer, Frank L.; Clements, Samuel L.; Carroll, Thomas E.; Fluckiger, Jerry D.

2009-11-18

Historical assessments of combat fratricide reveal principal contributing factors in the effects of stress, degradation of skills due to continuous operations or sleep deprivation, poor situation awareness, and lack of training and discipline in offensive/defense response selection. While these problems are typically addressed in R&D focusing on traditional ground-based combat, there is also an emerging need for improving situation awareness and decision making on defensive/offensive response options in the cyber defense arena, where a mistaken response to an actual or perceived cyber attack could lead to destruction or compromise of friendly cyber assets. The purpose of this report is to examine cognitive factors that may affect cyber situation awareness and describe possible research needs to reduce the likelihood and effects of "friendly cyber fire" on cyber defenses, information infrastructures, and data. The approach is to examine concepts and methods that have been described in research applied to the more traditional problem of mitigating the occurrence of combat identification and fratricide. Application domains of interest include cyber security defense against external or internal (insider) threats.

Best Friends: Alliances, Friend Ranking, and the MySpace Social Network.

Science.gov (United States)

DeScioli, Peter; Kurzban, Robert; Koch, Elizabeth N; Liben-Nowell, David

2011-01-01

Like many topics of psychological research, the explanation for friendship is at once intuitive and difficult to address empirically. These difficulties worsen when one seeks, as we do, to go beyond "obvious" explanations ("humans are social creatures") to ask deeper questions, such as "What is the evolved function of human friendship?" In recent years, however, a new window into human behavior has opened as a growing fraction of people's social activity has moved online, leaving a wealth of digital traces behind. One example is a feature of the MySpace social network that allows millions of users to rank their "Top Friends." In this study, we collected over 10 million people's friendship decisions from MySpace to test predictions made by hypotheses about human friendship. We found particular support for the alliance hypothesis, which holds that human friendship is caused by cognitive systems that function to create alliances for potential disputes. Because an ally's support can be undermined by a stronger outside relationship, the alliance model predicts that people will prefer partners who rank them above other friends. Consistent with the alliance model, we found that an individual's choice of best friend in MySpace is strongly predicted by how partners rank that individual. © The Author(s) 2011.

The new heating. Environmental-friendly and effectively heating with natural gas, wood, electricity and solar power; Die neue Heizung. Umweltfreundlich und wirtschaftlich heizen mit Gas, Holz, Strom und Sonnenenergie

Energy Technology Data Exchange (ETDEWEB)

Schulz, Marion; Westkaemper, Hubert

2013-02-01

Comfortable, climate-friendly and cost-effective heating technologies inclusive preparation of hot water and ventilation systems: Which technology is the best, most economical and most environmental one? Which fuel is economic as well as assured of a good future, if a new building or an energetically retrofitted old building is equipped with a heating system? These are the key issues for the house owners / building owners, planners, consultants and craftsmen. The book under consideration tries to answer these questions. Construction, planning benchmark figures and operational areas of modern heating technologies are described. The costs, the environmental pollutions and the economic efficiency of the most important systems are compared. The book contains hints on the decisive details of modern, energy saving system engineering including hot water preparation and ventilation technology. This handbook is suited for the selection and planning of energy saving and future-oriented heating systems.

Influence of friends on children's physical activity: a review.

Science.gov (United States)

Maturo, Claire C; Cunningham, Solveig A

2013-07-01

We examined evidence for friendship influences on children's physical activity (PA) through systematic searches of online databases in May 2012. We identified 106 studies (25 qualitative) published in English since 2000 that analyzed indicators of friendship influences (e.g., communication about PA, friends' PA, and PA with friends) among persons younger than 19 years. Children's PA was positively associated with encouragement from friends (43 of 55 studies indicating a positive relationship), friends' own PA (30/35), and engagement with friends in PA (9/10). These findings are consistent with friends influencing PA, but most studies did not isolate influence from other factors that could explain similarity. Understanding friendship influences in childhood can facilitate the promotion of lifelong healthy habits. PA with friends should be considered in health promotion programs.

Environmental tools in product development

DEFF Research Database (Denmark)

Wenzel, Henrik; Hauschild, Michael Zwicky; Jørgensen, Jørgen

1994-01-01

A precondition for design of environmentally friendly products is that the design team has access to methods and tools supporting the introduction of environmental criteria in product development. A large Danish program, EDIP, is being carried out by the Institute for Product Development, Technical...... University of Denmark, in cooperation with 5 major Danish companies aiming at the development and testing of such tools. These tools are presented in this paper...

The importance of message framing for providing information about sustainability and environmental aspects of energy

Energy Technology Data Exchange (ETDEWEB)

Van de Velde, Liesbeth; Verbeke, Wim; Van Huylenbroeck, Guido [Department of Agricultural Economics, Ghent University, Coupure Links 653, 9000 Gent (Belgium); Popp, Michael [Department of Agricultural Economics and Agribusiness, University of Arkansas, 217 Agriculture Building, Fayetteville, AR 72701 (United States)

2010-10-15

With a looming energy crisis, energy conservation and attention to environmental problems are warranted. The transport sector experiences great challenges to introduce more environmental friendly renewable energy like biofuels. The majority of the Belgian people are asking for more information about this issue. Because individuals are sensitive to how information is presented, the choice of the message frame can significantly influence attitudes and behavioural intention. Because of the strengthening effect on both concern and PCE, our findings suggest that for the prevention of energy and environmental problems and the promotion of a more sustainable and environmental friendly energy consumption not the gravity of these problems and the possible disadvantages but the possibilities to overcome these problems (e.g. reduction of energy use, environmental friendly energy sources) have to be stressed. Men, higher educated people, people between 35 and 54 years old and people with the most pro-environmental attitude are less affected by the message frame, while the choice of the frame is more important when addressing women, people younger than 35 and older than 55 years, lower educated and less pro-environmental people. (author)

The importance of message framing for providing information about sustainability and environmental aspects of energy

International Nuclear Information System (INIS)

Van de Velde, Liesbeth; Verbeke, Wim; Popp, Michael; Van Huylenbroeck, Guido

2010-01-01

With a looming energy crisis, energy conservation and attention to environmental problems are warranted. The transport sector experiences great challenges to introduce more environmental friendly renewable energy like biofuels. The majority of the Belgian people are asking for more information about this issue. Because individuals are sensitive to how information is presented, the choice of the message frame can significantly influence attitudes and behavioural intention. Because of the strengthening effect on both concern and PCE, our findings suggest that for the prevention of energy and environmental problems and the promotion of a more sustainable and environmental friendly energy consumption not the gravity of these problems and the possible disadvantages but the possibilities to overcome these problems (e.g. reduction of energy use, environmental friendly energy sources) have to be stressed. Men, higher educated people, people between 35 and 54 years old and people with the most pro-environmental attitude are less affected by the message frame, while the choice of the frame is more important when addressing women, people younger than 35 and older than 55 years, lower educated and less pro-environmental people.

The Symbiose project: an integrated framework for performing environmental radiological risk assessment

International Nuclear Information System (INIS)

Gonze, M.A.; Mourlon, C.; Garcia-Sanchez, L.; Beaugelin, K.; Chen, T.; Le Dizes, S.

2004-01-01

Human health and ecological risk assessments usually require the integration of a wide range of environmental data and modelling approaches, with a varying level of detail dependent on the management objectives, the complexity of the site and the level of ignorance about the pollutant behaviour/toxicity. Like most scientists and assessors did it recently, we recognized the need for developing comprehensive, integrated and flexible approaches to risk assessment. To meet these needs, IRSN launched the Symbiose project (2002-2006) which aims first, at designing a framework for integrating and managing data, methods and knowledge of some relevance in radiological risk to humans/biota assessment studies, and second, at implementing this framework in an information management, modelling and calculation platform. Feasibility developments (currently completed) led to the specification of a fully integrated, object-oriented and hierarchical approach for describing the fate, transport and effect of radionuclides in spatially-distributed environmental systems. This innovative approach has then been implemented in a platform prototype, main components of which are a user-friendly and modular simulation environment (e.g. using GoldSim toolbox), and a hierarchical object-oriented biosphere database. Both conceptual and technical developments will be presented here. (author)

Study questions environmental impact of fuel-cell vehicles

Science.gov (United States)

Stafford, Ned

2015-09-01

Fuel-cell electric vehicles are seen by many as an environmentally friendly technology that can reduce greenhousegas emissions by producing no harmful emissions. But a new study has found that overall a fuel cell electric vehicle has about the same negative environmental impact as a luxury sports car.

Overview of the Multimedia Environmental Pollutant Assessment System (MEPAS)

International Nuclear Information System (INIS)

Whelan, G.; Buck, J.W.; Strenge, D.L.; Droppo, J.G.; Hoopes, B.L.; Aiken, R.J.

1992-01-01

The Multimedia Environmental Pollutant Assessment System (MEPAS) is a physics-based risk computation code that integrates source-term, transport, and exposure models. Developed by Pacific Northwest Laboratory for screening and ranking of environmental problems, MEPAS is designed for site-specific assessments using readily available information to estimate potential health impacts. Risk values are computed for chemical and radioactive carcinogens; while hazard quotients, based on reference doses, are computed for noncarcinogens. This system has wide applicability to a range of environmental problems using air, groundwater, surface-water, overland, and exposure models. Whenever available and appropriate, EPA guidance and models were used to facilitate compatibility and acceptance. Although based on relatively standard transport and exposure computation approaches, the unique feature of MEPAS is that these approaches are integrated into a single system. The use of a single system provides a consistent basis for evaluating health impacts for a large number of problems and sites. Implemented on a desktop computer, a user-friendly shell allows the user to define the problem, input the required data, and execute the appropriate models. The MEPAS guidance documents include sources of information. MEPAS can be used for both screening and assessment applications for the remedial investigation/risk assessment/feasibility study and environment restoration processes

Conceptualizing strategic environmental assessment: Principles, approaches and research directions

International Nuclear Information System (INIS)

Noble, Bram; Nwanekezie, Kelechi

2017-01-01

Increasing emphasis has been placed in recent years on transitioning strategic environmental assessment (SEA) away from its environmental impact assessment (EIA) roots. Scholars have argued the need to conceptualize SEA as a process designed to facilitate strategic thinking, thus enabling transitions toward sustainability. The practice of SEA, however, remains deeply rooted in the EIA tradition and scholars and practitioners often appear divided on the nature and purpose of SEA. This paper revisits the strategic principles of SEA and conceptualizes SEA as a multi-faceted and multi-dimensional assessment process. It is suggested that SEA can be conceptualized as series of approaches operating along a spectrum from less to more strategic – from impact assessment-based to strategy-based – with each approach to SEA differentiated by the specific objectives of SEA application and the extent to which strategic principles are reflected in its design and implementation. Advancing the effectiveness of SEA requires a continued research agenda focused on improving the traditional SEA approach, as a tool to assess the impacts of policies, plans and programs (PPPs). Realizing the full potential of SEA, however, requires a new research agenda — one focused on the development and testing of a deliberative governance approach to SEA that can facilitate strategic innovations in PPP formulation and drive transitions in short-term policy and initiatives based on longer-term thinking. - Highlights: • SEA facilitates strategic thinking, enabling transitions toward sustainability. • SEA is conceptualized as a spectrum of approaches, from IA-based to strategy-based. • Each approach variably emphasizes strategic principles in its design and practice. • There is no one conceptualization of SEA that is best, SEA is fit for PPP purpose. • Research is needed to advance SEA to facilitate strategic PPP transformations.

Conceptualizing strategic environmental assessment: Principles, approaches and research directions

Energy Technology Data Exchange (ETDEWEB)

Noble, Bram, E-mail: b.noble@usask.ca [Department of Geography and Planning, and School of Environment and Sustainability, University of Saskatchewan, 117 Science Place, Saskatoon, Saskatchewan S7N 5A5 (Canada); Nwanekezie, Kelechi [Department of Geography and Planning, University of Saskatchewan, 117 Science Place, Saskatoon, Saskatchewan S7N 5A5 (Canada)

2017-01-15

Increasing emphasis has been placed in recent years on transitioning strategic environmental assessment (SEA) away from its environmental impact assessment (EIA) roots. Scholars have argued the need to conceptualize SEA as a process designed to facilitate strategic thinking, thus enabling transitions toward sustainability. The practice of SEA, however, remains deeply rooted in the EIA tradition and scholars and practitioners often appear divided on the nature and purpose of SEA. This paper revisits the strategic principles of SEA and conceptualizes SEA as a multi-faceted and multi-dimensional assessment process. It is suggested that SEA can be conceptualized as series of approaches operating along a spectrum from less to more strategic – from impact assessment-based to strategy-based – with each approach to SEA differentiated by the specific objectives of SEA application and the extent to which strategic principles are reflected in its design and implementation. Advancing the effectiveness of SEA requires a continued research agenda focused on improving the traditional SEA approach, as a tool to assess the impacts of policies, plans and programs (PPPs). Realizing the full potential of SEA, however, requires a new research agenda — one focused on the development and testing of a deliberative governance approach to SEA that can facilitate strategic innovations in PPP formulation and drive transitions in short-term policy and initiatives based on longer-term thinking. - Highlights: • SEA facilitates strategic thinking, enabling transitions toward sustainability. • SEA is conceptualized as a spectrum of approaches, from IA-based to strategy-based. • Each approach variably emphasizes strategic principles in its design and practice. • There is no one conceptualization of SEA that is best, SEA is fit for PPP purpose. • Research is needed to advance SEA to facilitate strategic PPP transformations.

An eco-friendly approach for heavy metal adsorbent regeneration using CO2-responsive molecular octopus.

Science.gov (United States)

Bai, Yu; Liang, Yen Nan; Hu, Xiao

2017-10-01

Perennial problems of adsorption in wastewater treatment include adsorbent recycling, generation of waste sludge and secondary pollution because harmful concentrated acids, bases or strong chelators are often used for adsorbent regeneration and adsorbate recovery. We report, for the first time, an eco-friendly regeneration concept demonstrated with a CO 2 -responsive octopus-like polymeric adsorbent. Various heavy metals can be scavenged at very high Q e by such adsorbent through coordination. Most importantly, the rapid and complete regeneration of the adsorbent and recovery of the heavy metal ions can be readily achieved by CO 2 bubbling within a few minutes under mild conditions, i.e., room temperature and atmospheric pressure. The adsorbent can then be restored to its adsorptive state and reused upon removal of CO 2 by simply bubbling another gas. This eco-friendly, effective, ultra-fast and repeatable CO 2 -triggered regeneration process using CO 2 -responsive adsorbent with versatile structure, morphology or form can be incorporated into a sustainable closed-loop wastewater treatment process to solve the perennial problems. Copyright © 2017 Elsevier Ltd. All rights reserved.

A heuristic approach using multiple criteria for environmentally benign 3PLs selection

Science.gov (United States)

Kongar, Elif

2005-11-01

Maintaining competitiveness in an environment where price and quality differences between competing products are disappearing depends on the company's ability to reduce costs and supply time. Timely responses to rapidly changing market conditions require an efficient Supply Chain Management (SCM). Outsourcing logistics to third-party logistics service providers (3PLs) is one commonly used way of increasing the efficiency of logistics operations, while creating a more "core competency focused" business environment. However, this alone may not be sufficient. Due to recent environmental regulations and growing public awareness regarding environmental issues, 3PLs need to be not only efficient but also environmentally benign to maintain companies' competitiveness. Even though an efficient and environmentally benign combination of 3PLs can theoretically be obtained using exhaustive search algorithms, heuristics approaches to the selection process may be superior in terms of the computational complexity. In this paper, a hybrid approach that combines a multiple criteria Genetic Algorithm (GA) with Linear Physical Weighting Algorithm (LPPW) to be used in efficient and environmentally benign 3PLs is proposed. A numerical example is also provided to illustrate the method and the analyses.

Development of environmental-friendly wire and cable

International Nuclear Information System (INIS)

Ueno, Keiji

1996-01-01

The electron beam technology has been used in many industrial fields as a method of conventional polymer modification or optimum processability. The main industrial fields of radiation crosslinking are wire and cable, heat shrinkable tubings, plastic foams, precuring of tires, floppy disk curing, foods packaging films, and so on. The radiation crosslinking of wire and cable was started in 1961 in Japan and 15 wire and cable companies are now using electron beam accelerators for production or R and D. The dominant characteristics of crosslinking of insulation materials are application at high temperature, good oil and chemical resistibility and high mechanical properties. These radiation crosslinking wire and cable are applied widely in electronics equipments and automobiles. Recently, electronics manufacturers have indicated deep concern over the effects on the environment. Wire and cable also are required to be applicable for environmental preservation. (J.P.N.)

Parental influences on memories of parents and friends.

Science.gov (United States)

Tani, Franca; Bonechi, Alice; Peterson, Carole; Smorti, Andrea

2010-01-01

The authors evaluated the role parent-child relationship quality has on two types of memories, those of parents and those of friends. Participants were 198 Italian university students who recalled memories during 4 separate timed memory-fluency tasks about their preschool, elementary school, middle school, high school and university years. Half were instructed to recall memories involving parents and the remainder memories involving friends. Moreover, parent-child relationships were assessed by the Network of Relationships Inventory (NRI; W. Furman & D. Buhrmester, 1985) and Adolescents' Report of Parental Monitoring (D. M. Capaldi & G. R. Patterson, 1989). Results showed that men with positive parent-son relationships had more memories of parents and more affectively positive memories of friends, supporting a consistency model positing similarity between parent-child relationships and memories of friends. Women with positive parental relationship quality had more affectively positive memories of parents but for friends, positive relationship quality only predicted positive memories when young. At older ages, especially middle school-aged children, negative parent-daughter relationships predicted more positive memories of friends, supporting a compensatory model. The gender of parent also mattered, with fathers having a more influential role on affect for memories of friends.

Eco friendly expectations and limitations in daycare

DEFF Research Database (Denmark)

Husted, Mia

This presentation elaborates on expectations and limitations of eco-friendly pedagogical responses to the sustainability crisis. The pedagogical perspectives on eco-friendly responses originates from an action research project involving pedagogues in day care centers and teachers at a University ...... College in Denmark. As part of the project they were asked to explore, elaborate and develop new pedagogical actions and perspectives related to future relationships between human beings and our common nature......This presentation elaborates on expectations and limitations of eco-friendly pedagogical responses to the sustainability crisis. The pedagogical perspectives on eco-friendly responses originates from an action research project involving pedagogues in day care centers and teachers at a University...

Dye sensitized solar cell based on environmental friendly eosin Y dye and Al doped titanium dioxide nano particles

Science.gov (United States)

Kulkarni, Swati S.; Bodkhe, Gajanan A.; Shirsat, Sumedh M.; Hussaini, S. S.; Shejwal, N. N.; Shirsat, Mahendra D.

2018-03-01

Present communication deals with the development of cost effective dye sensitized solar cell (DSSC) with eco-friendly materials. Eco-friendly Eosin Y dye was used to sensitize photo anode which was fabricated using undoped and Aluminium doped titanium dioxide (TiO2) nanoparticles. Undoped and Aluminium doped TiO2 nanoparticles were synthesized by simple and cost effective sol-gel method. Aluminium doped and undoped TiO2 nanoparticles were characterized using UV-visible, FT-IR spectroscopy, x-ray Diffraction, and Scanning Electron Micrograph with EDX. The photo-voltaic activity of the cell was studied under light irradiation of 100 milliwatt cm-2. Aluminium doped TiO2 nanoparticle photo electrode exhibits more than 60% increase in cell efficiency as compared to the undoped TiO2 nanoparticle photo electrode.

NEW POSSIBILITIES OF ENVIRONMENTALY FRIENDLY CLEANING METHOD BY LASER TECHNOLOGY

Directory of Open Access Journals (Sweden)

Lýdia Sobotová

2016-12-01

Full Text Available Still deteriorating environment, requirements for reducing of production waste, requirements for the protection of the working environment, the formation of new technologies and materials, as well as the economic conditions are forcing manufacturers to use the environmentally friendly technology. The contribution deals with new progressive possibilities of cleaning products, raw materials and with the establishment of a minimum production waste. The research focuses on the possibilities of laser cleaning of materials, under defined technological conditions. In the contribution is presented the results of realized experiments in Technical University of Kosice, together created in cooperation with Trumpf Slovakia, s.r.o

An analysis of environmental data transmission

Science.gov (United States)

Yuan, Lina; Chen, Huajun; Gong, Jing

2017-05-01

To comprehensively construct environmental automatic monitoring has become the urgent need of environmental management, is a major measure to implement the scientific outlook on development and build a harmonious socialist society, and is an inevitable choice of “building a resource-conserving and environment-friendly society”, which is of great importance and profound significance to adjust the economic structure and transform growth pattern. This article first introduces the importance of environmental data transmission, then expounds the characteristics, key technologies, transmitting mode, and design ideas of environmental data transmission process, and finally, summarizes the full text.

Environmental model for a capital city

Directory of Open Access Journals (Sweden)

Claudia Eugenia Toca Torres

2013-06-01

Full Text Available From a review of the various options for modeling a sustainable development in its environmental dimension, this research proposes a model of environmental impact for Bogota, using the Vensim PLE software to model the pollution, the pollution load and soil contamination. The model includes a limited number of endogenous variables, as well as a greater number of exogenous variables. This modeling allows us to anticipate the environmental situation in the capital, in order to support public policies for addressing issues such as economic sanctions and moral regulations on emissions, discharges and waste, environmental measures and environmentally friendly practices

A user-friendly model for spray drying to aid pharmaceutical product development

NARCIS (Netherlands)

Grasmeijer, Niels; de Waard, Hans; Hinrichs, Wouter L J; Frijlink, Henderik W

2013-01-01

The aim of this study was to develop a user-friendly model for spray drying that can aid in the development of a pharmaceutical product, by shifting from a trial-and-error towards a quality-by-design approach. To achieve this, a spray dryer model was developed in commercial and open source

Technical, economic and environmental investigation of using district heating to prepare domestic hot water in Chinese multi-storey buildings

DEFF Research Database (Denmark)

Zhang, Lipeng; Xia, Jianjun; Thorsen, Jan Eric

2016-01-01

The development of DH (District Heating) is an environmentally friendly and energy-efficient strategy in China. Currently, the vast majority of DH systems are SH (Space Heating) only and do not provide DHW (Domestic Hot Water). DHW is mainly produced by individual water heaters due to the cost......-effective issues of the centralized DHW systems. From the perspective of long-term development, DHW produced via DH systems would be more sustainable because DH is an important precondition for an environmental safe use of domestic waste fuels. This paper presents an approach that uses flat stations meanwhile...

Use of family-friendly work Arrangements and work-family conflict: Crossover effects in dual-earner couples

OpenAIRE

Schooreel, Tess; Verbruggen, Marijke

2016-01-01

This study uses a dyadic approach to examine how an employee’s work–family conflict is affected when his or her partner makes use of family-friendly work arrangements. We focused on 2 types of family-friendly practices, that is, reduced work hours and schedule or workplace flexibility. Hypotheses were tested with multilevel structural equation modeling using information of 186 dual-earner couples. In line with our hypotheses, we found support for both a positive and a negative crossover ef...

Fermilab Friends for Science Education | Programs

Science.gov (United States)

Fermilab Friends for Science Education FFSE Home About Us Join Us Support Us Contact Us Programs Donors Board of Directors Board Tools Calendar Join Us Donate Now Get FermiGear! Education Office Search photo Fermilab Friends for Science Education, in partnership with Fermilab and area educators, designs

Environmental policy instruments and technological change in the energy sector: findings from comparative empirical research

International Nuclear Information System (INIS)

Skjaerseth, J.B.; Christiansen, A.C.

2006-01-01

This article explores the extent to which and in what ways environmental policy instruments may affect patterns of environmental friendly technological change in the energy sector. Our argument is based on the assumption, however, that technological change is also affected by the political context in which the instruments are applied and by the nature of the problem itself. Comparative empirical research involving different European countries, sectors and policy fields were examined, including climate change, air pollution and wind power. The relationship between environmental policy instruments and technological change is extremely complex, not least due to the impact of other factors that may be more decisive than environmental ones. Against this backdrop, it was concluded that: 1) a portfolio of policy instruments works to the extent that different types of policy instruments affect the different drivers and stages behind technological change needed to solve specific problems. The need for a portfolio of policy instruments depends on the technological challenge being faced; 2) voluntary approaches facilitated constructive corporate strategies, but mandatory approaches tended to be more effective in stimulating short term major technological change; 3) voluntary approaches work well in the short term when the problem to be solved is characterized by lack of information and coordination. (author)

Best friends' discussions of social dilemmas.

Science.gov (United States)

McDonald, Kristina L; Malti, Tina; Killen, Melanie; Rubin, Kenneth H

2014-02-01

Peer relationships, particularly friendships, have been theorized to contribute to how children and adolescents think about social and moral issues. The current study examined how young adolescent best friends (191 dyads; 53.4% female) reason together about multifaceted social dilemmas and how their reasoning is related to friendship quality. Mutually-recognized friendship dyads were videotaped discussing dilemmas entailing moral, social-conventional and prudential/pragmatic issues. Both dyad members completed a self-report measure of friendship quality. Dyadic data analyses guided by the Actor-Partner Interdependence Model indicated that adolescent and friend reports of friendship qualities were related to the forms of reasoning used during discussion. Friends who both reported that they could resolve conflicts in a constructive way were more likely to use moral reasoning than friends who reported that their conflict resolution was poor or disagreed on the quality of their conflict resolution. The findings provide evidence for the important role that friendship interaction may play in adolescents' social and moral development.

Implementation of family friendly policy in Lithuania : problems and possibilities

OpenAIRE

Jančaitytė, Raminta

2006-01-01

Family friendly policy is workplace policies that assist employees in combining family and work responsibilities. Significant and dominant feature of the contemporary Lithuanian labour market is women's increasing participation while they still predominantly hold domestic role. The focus of reconciling work and family has traditionally been concentrated on women. The article deals with work-family models and a typology of workplace policies that show different approach to problems of reconcil...

How Can I Help a Friend Who Cuts?

Science.gov (United States)

... Safe Videos for Educators Search English Español How Can I Help a Friend Who Cuts? KidsHealth / For Teens / How Can I Help a Friend Who Cuts? What's in ... them? If so, what should you do? It can be hard to understand why a friend might ...

CH3NH3Pb1−xMgxI3 perovskites as environmentally friendly photovoltaic materials

Directory of Open Access Journals (Sweden)

Y. D. Zhang

2018-01-01

Full Text Available In an effort to reduce the toxicity of Pb in perovskite solar cells, the band structures, electron and hole effective masses, and electronic and optical properties of the novel perovskites CH3NH3Pb1−xMgxI3 were predicted using density functional theory with the scalar relativistic generalized gradient approximation. The calculation results indicated that the introduction of the Mg component caused the band gaps of the CH3NH3Pb1−xMgxI3 compounds to exceed that of CH3NH3PbI3. The calculated absorption coefficients of the CH3NH3PbI3 and CH3NH3Pb1−xMgxI3 perovskites revealed that substituting 12.5 mol % of the Pb in CH3NH3PbI3 with Mg had little effect on the absorption ability. Surprisingly, it was also found that CH3NH3Pb0.75Mg0.25I3 retained up to 83% of the absorption performance relative to CH3NH3PbI3. This indicates that the amount of toxic Pb used in perovskite solar cells could be reduced by a quarter while retaining over 80% of the light-absorbing ability. In general, these novel CH3NH3Pb1−xMgxI3 (x ≤ 0.25 perovskites represent promising candidates for environmentally friendly light-harvesting materials for use in solar cells.

Is Formal Environmental Education Friendly to Nature? Environmental Ethics in Science Textbooks for Primary School Pupils in Poland

Science.gov (United States)

Gola, Beata

2017-01-01

Due to the increased interest in ecology, global warming and numerous environmental problems, ecological issues are becoming extremely important in education. Many researchers and thinkers believe that solutions to environmental problems are affected by the environmental ethics adopted. This article identifies which of the three branches of…

An environmental assessment of grass-finishing beef operations in Pennsylvania

Science.gov (United States)

Concern for the environmental sustainability of traditional beef production has increased consumer interest in alternatively produced beef products perceived to be more environmentally friendly. This includes those marketed under “grassfed beef” labels. However, little information exists on the env...

Cost And Environmental Optimization Of Waste Supply Chains Using Clca

DEFF Research Database (Denmark)

Sacchi, Romain; Wæhrens, Brian Vejrum; Prosman, Ernst Johannes

2016-01-01

Although circular supply chains are widely perceived as a huge leap towards a more environmentally friendly economy, supply chain literature lacks environmental supplier selection criteria (E-SSC) for circular supply chains. Taking into account the various characteristics of circular supply chains...

New and future developments in catalysis catalysis for remediation and environmental concerns

CERN Document Server

Suib, Steven L

2013-01-01

New and Future Developments in Catalysis is a package of seven books that compile the latest ideas concerning alternate and renewable energy sources and the role that catalysis plays in converting new renewable feedstock into biofuels and biochemicals. Both homogeneous and heterogeneous catalysts and catalytic processes will be discussed in a unified and comprehensive approach. There will be extensive cross-referencing within all volumes. The various sources of environmental pollution are the theme of this volume. The volume lists all current environmentally friendly catalytic chemical processes used for environmental remediation and critically compares their economic viability. Offers in-depth coverage of all catalytic topics of current interest and outlines future challenges and research areas A clear and visual description of all parameters and conditions, enabling the reader to draw conclusions for a particular case Outlines the catalytic processes applicable to energy generation and design of green proce...

Environmental transport and human exposure: A multimedia approach in health-risk policy

Energy Technology Data Exchange (ETDEWEB)

McKone, T.E.

1992-05-01

In his treatise Air, Water, and Places, the ancient-Greek physician Hippocrates demonstrated that the appearance of disease in human populations is influenced by the quality of air, water, and food; the topography of the land; and general living habits. This approach is still relevant and, indeed, the conerstone of modem efforts to relate public health to environmental factors. What has changed is the precision with which we can measure and model these long-held relationships. Environmental scientists recognize that plants, animals, and humans encounter environmental contaminants via complex transfers through air, water, and food and use multimedia models to evaluate these transfers. In this report, I explore the use of multimedia models both to examine pollution trends and as a basis for characterizing human health risks and ecological risks. The strengths and weaknesses of the approach are discussed.

Environmental Kuznets curve for EU agriculture: empirical evidence from new entrant EU countries.